64. VIEW OF EAST LORING LAKE LOOKING WEST FROM HILL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

64. VIEW OF EAST LORING LAKE LOOKING WEST FROM HILL BEHIND BUILDING 345 (ENTRY CONTROL BUILDING) IN STORAGE AREA, WITH BUILDING 1026 (BASE SPARES AREA WATER TOWER) IN DISTANCE. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

Building 736, second floor, view to southwest showing original window ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building 736, second floor, view to southwest showing original window on the left, and electrical controls and entry ladder on the right - Mare Island Naval Shipyard, Electrical Distribution Centers, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

FET. Control and equipment building (TAN630). Sections. Earth cover. Shielded ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FET. Control and equipment building (TAN-630). Sections. Earth cover. Shielded access entries for personnel and vehicles. Ralph M. Parsons 1229-2 ANP/GE-5-630-A-3. Date: March 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 036-0630-00-693-107082 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

2. Credit PSR. The Administration/Shops Building appears here as the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Credit PSR. The Administration/Shops Building appears here as the camera looks east (84°). To the right in the view is the Guard House (Building 4279/E-80) which controls entry to the JPL facility. At left is a warehouse (Building 4287/E88). Overhead utility lines supply alternating current to the facility. - Jet Propulsion Laboratory Edwards Facility, Administration & Shops Building, Edwards Air Force Base, Boron, Kern County, CA

8. BUILDING 313, INTERIOR, EAST WALL OF EASTERN STOREROOM, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. BUILDING 313, INTERIOR, EAST WALL OF EASTERN STOREROOM, LOOKING NORTHEAST, WITH TIME CLOCK AND FIRE SPRINKLER CONTROLS ON WALL, AND ENTRY TO OFFICE AREA AT LEFT. - Oakland Naval Supply Center, General Storehouses, Between Third & Fourth Streets, North of A Street, Oakland, Alameda County, CA

LOFT complex in 1975 awaits renewed mission. Aerial view. Camera ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT complex in 1975 awaits renewed mission. Aerial view. Camera facing southwesterly. Left to right: stack, entry building (TAN-624), door shroud, duct shroud and filter hatches, dome (painted white), pre-amp building, equipment and piping building, shielded control room (TAN-630), airplane hangar (TAN-629). Date: 1975. INEEL negative no. 75-3690 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Research on the water-entry attitude of a submersible aircraft.

PubMed

Xu, BaoWei; Li, YongLi; Feng, JinFu; Hu, JunHua; Qi, Duo; Yang, Jian

2016-01-01

The water entry of a submersible aircraft, which is transient, highly coupled, and nonlinear, is complicated. After analyzing the mechanics of this process, the change rate of every variable is considered. A dynamic model is build and employed to study vehicle attitude and overturn phenomenon during water entry. Experiments are carried out and a method to organize experiment data is proposed. The accuracy of the method is confirmed by comparing the results of simulation of dynamic model and experiment under the same condition. Based on the analysis of the experiment and simulation, the initial attack angle and angular velocity largely influence the water entry of vehicle. Simulations of water entry with different initial and angular velocities are completed, followed by an analysis, and the motion law of vehicle is obtained. To solve the problem of vehicle stability and control during water entry, an approach is proposed by which the vehicle sails with a zero attack angle after entering water by controlling the initial angular velocity. With the dynamic model and optimization research algorithm, calculation is performed, and the optimal initial angular velocity of water-entry is obtained. The outcome of simulations confirms that the effectiveness of the propose approach by which the initial water-entry angular velocity is controlled.

Experimental Modeling of Sterilization Effects for Atmospheric Entry Heating on Microorganisms

NASA Technical Reports Server (NTRS)

Schubert, Wayne W.; Spry, James A.; Ronney, Paul D.; Pandian, Nathan R.; Welder, Eric

2012-01-01

The objective of this research was to design, build, and test an experimental apparatus for studying the parameters of atmospheric entry heating, and the inactivation of temperature-resistant bacterial spores. The apparatus is capable of controlled, rapid heating of sample coupons to temperatures of 200 to 350 C and above. The vacuum chamber permits operation under vacuum or special atmospheric gas mixtures.

Wind-induced contaminant transport in near-surface soils with application to radon entry into buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, William Jowett

1996-05-01

Indoor air exposures to gaseous contaminants originating in soil can cause large human health risks. To predict and control these exposures, the mechanisms that affect vapor transport in near-surface soils need to be understood. In particular, radon exposure is a concern since average indoor radon concentrations lead to much higher risks than are generally accepted for exposure to other environmental contaminants. This dissertation examines an important component of the indoor radon problem: the impacts of wind on soil-gas and radon transport and entry into buildings. The research includes experimental and modeling studies of wind`s interactions with a building`s superstructure andmore » the resulting soil-gas and radon flows in the surrounding soil. In addition to exploring the effects of steady winds, a novel modeling technique is developed to examine the impacts of fluctuating winds on soil-gas and radon transport.« less

5. DETAIL VIEW OF ADMINISTRATION BUILDING SHOWING PRINCIPAL, EAST, ENTRY. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. DETAIL VIEW OF ADMINISTRATION BUILDING SHOWING PRINCIPAL, EAST, ENTRY. VIEW TO WEST. - VA Medical Center, Aspinwall Division, Administration Building, 5103 Delafield Avenue, Aspinwall, Allegheny County, PA

57. Entry door (open), BE16, basement level, building 500, looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

57. Entry door (open), BE-16, basement level, building 500, looking southeast - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

36. Waiting area at main entry to building 500, Awing, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. Waiting area at main entry to building 500, A-wing, looking southeast - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

46. SAC Commander in Chief entry, second floor, Awing, building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. SAC Commander in Chief entry, second floor, A-wing, building 500, looking north - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

56. Entry door (closed), BB16, basement level, building 500, looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. Entry door (closed), BB-16, basement level, building 500, looking southeast - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

Superintendents' Entry Periods: Strategies and Behaviors That Successful Superintendents Use to Build Strong Relationships and Trust with Their School Boards during Their Entry Period

ERIC Educational Resources Information Center

Howland, Sean J.

2012-01-01

The purpose of the study was to identify strategies/behaviors that successful superintendents used to build strong relationships and trust with their school boards during their entry periods. Three research questions guided the study: (1) What strategies/behaviors are successful superintendents using to build strong relationships and trust with…

12. BUILDING 324, INTERIOR, ENTRY HALL AND STAIRWAY, FROM SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. BUILDING 324, INTERIOR, ENTRY HALL AND STAIRWAY, FROM SOUTH ENTRY, LOOKING NORTH, WITH HALL LEADING TO GARAGE TO RIGHT OF STAIRWAY. - Oakland Naval Supply Center, Commanding Officers Residences, Between E & F Streets, West of Fourth Street, Oakland, Alameda County, CA

Oblique of mine observation tower building showing entry door and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Oblique of mine observation tower building showing entry door and transformer building behind on right. View facing north-northwest - U.S. Naval Base, Pearl Harbor, Waipio Peninsula, Waipo Peninsula, Pearl City, Honolulu County, HI

3. COMPARATIVE PHOTO SHOWING DIFFERENT REAR ENTRIES ON TWO BUILDINGS, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. COMPARATIVE PHOTO SHOWING DIFFERENT REAR ENTRIES ON TWO BUILDINGS, BUILDING MT-76-A IN FOREGROUND - Fort Keogh, Livestock & Range Research Station, 3 miles west of Miles City on U.S. Highway 10, Miles City, Custer County, MT

3. DETAIL VIEW OF THE MAIN ENTRY OF BUILDING 13, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. DETAIL VIEW OF THE MAIN ENTRY OF BUILDING 13, SHOWING THE ORIGINAL LIGHT FIXTURES AND THE EGYPTIAN MOTIF DECORATION; LOOKING SSW. (Ryan) - Veterans Administration Medical Center, Building No. 13, Old State Route 13 West, Marion, Williamson County, IL

Attitude determination with three-axis accelerometer for emergency atmospheric entry

NASA Technical Reports Server (NTRS)

Garcia-Llama, Eduardo (Inventor)

2012-01-01

Two algorithms are disclosed that, with the use of a 3-axis accelerometer, will be able to determine the angles of attack, sideslip and roll of a capsule-type spacecraft prior to entry (at very high altitudes, where the atmospheric density is still very low) and during entry. The invention relates to emergency situations in which no reliable attitude and attitude rate are available. Provided that the spacecraft would not attempt a guided entry without reliable attitude information, the objective of the entry system in such case would be to attempt a safe ballistic entry. A ballistic entry requires three controlled phases to be executed in sequence: First, cancel initial rates in case the spacecraft is tumbling; second, maneuver the capsule to a heat-shield-forward attitude, preferably to the trim attitude, to counteract the heat rate and heat load build up; and third, impart a ballistic bank or roll rate to null the average lift vector in order to prevent prolonged lift down situations. Being able to know the attitude, hence the attitude rate, will allow the control system (nominal or backup, automatic or manual) to cancel any initial angular rates. Also, since a heat-shield forward attitude and the trim attitude can be specified in terms of the angles of attack and sideslip, being able to determine the current attitude in terms of these angles will allow the control system to maneuver the vehicle to the desired attitude. Finally, being able to determine the roll angle will allow for the control of the roll ballistic rate during entry.

48. FRONT ENTRY DETAIL ON SOUTHWEST ELEVATION OF BUILDING 361 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

48. FRONT ENTRY DETAIL ON SOUTHWEST ELEVATION OF BUILDING 361 (MUNITIONS MAINTENANCE SQUADRON ADMINISTRATION BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

3. DETAIL VIEW OF S ENTRY DOOR TO BUILDING 8, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. DETAIL VIEW OF S ENTRY DOOR TO BUILDING 8, SHOWING ONE OF THE ORIGINAL LIGHT FIXTURES AND THE EGYPTIAN MOTIF DECORATION; LOOKING N (Ryan) - Veterans Administration Medical Center, Building No. 8, Old State Route 13 West, Marion, Williamson County, IL

3. AERIAL VIEW FROM THE EAST OF (FOREGROUND TO BACKGROUND) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. AERIAL VIEW FROM THE EAST OF (FOREGROUND TO BACKGROUND) SLC-3 AIR FORCE BUILDING (BLDG. 761), TECHNICAL SUPPORT BUILDING (BLDG. 762/762A), ENTRY CONTROL POINT (BLDG. 768), AND LOB (BLDG. 763). EAST SIDE OF SLC-3E MOBILE SERVICE TOWER (MST) VISIBLE IN UPPER LEFT CORNER. - Vandenberg Air Force Base, Space Launch Complex 3, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

SPERTI Reactor Pit Building (PER605). Earth shielding protect adjacent Instrument ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SPERT-I Reactor Pit Building (PER-605). Earth shielding protect adjacent Instrument Cell (PER-606). Security fencing surrounds complex, to which gate entry is provided next to Guard House (PER-607). Note gravel road leading to control area. Earth-covered conduit leads from instrument cell to terminal building out of view. Photographer: R.G. Larsen. Date: June 22, 1955. INEEL negative no. 55-1701 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

LOFT. Containment building entry, an adapted use of TAN624, which ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT. Containment building entry, an adapted use of TAN-624, which originated as the mobile test building for the ANP program. Camera facing north. Note four-rail track entered building stack at right of view. Date: March 2004. INEEL negative no. HD-39-4-1 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Survey of Solar Buildings.

ERIC Educational Resources Information Center

Gray, Robert; Baker, Steven

This survey brings together information concerning the growing number of buildings utilizing solar energy and is designed to facilitate the comparison of specific characteristics of the buildings. The 66 U.S. entries are divided into five regions, arranged by state, and roughly by date within each state. Seven entries are from other countries. A…

Simulation-Based Analysis of Reentry Dynamics for the Sharp Atmospheric Entry Vehicle

NASA Technical Reports Server (NTRS)

Tillier, Clemens Emmanuel

1998-01-01

This thesis describes the analysis of the reentry dynamics of a high-performance lifting atmospheric entry vehicle through numerical simulation tools. The vehicle, named SHARP, is currently being developed by the Thermal Protection Materials and Systems branch of NASA Ames Research Center, Moffett Field, California. The goal of this project is to provide insight into trajectory tradeoffs and vehicle dynamics using simulation tools that are powerful, flexible, user-friendly and inexpensive. Implemented Using MATLAB and SIMULINK, these tools are developed with an eye towards further use in the conceptual design of the SHARP vehicle's trajectory and flight control systems. A trajectory simulator is used to quantify the entry capabilities of the vehicle subject to various operational constraints. Using an aerodynamic database computed by NASA and a model of the earth, the simulator generates the vehicle trajectory in three-dimensional space based on aerodynamic angle inputs. Requirements for entry along the SHARP aerothermal performance constraint are evaluated for different control strategies. Effect of vehicle mass on entry parameters is investigated, and the cross range capability of the vehicle is evaluated. Trajectory results are presented and interpreted. A six degree of freedom simulator builds on the trajectory simulator and provides attitude simulation for future entry controls development. A Newtonian aerodynamic model including control surfaces and a mass model are developed. A visualization tool for interpreting simulation results is described. Control surfaces are roughly sized. A simple controller is developed to fly the vehicle along its aerothermal performance constraint using aerodynamic flaps for control. This end-to-end demonstration proves the suitability of the 6-DOF simulator for future flight control system development. Finally, issues surrounding real-time simulation with hardware in the loop are discussed.

4. Sac shield at entry of command center, building 501, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Sac shield at entry of command center, building 501, looking west - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

5. Command center doors at command center entry, building 501, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Command center doors at command center entry, building 501, looking north - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

PredGuid+A: Orion Entry Guidance Modified for Aerocapture

NASA Technical Reports Server (NTRS)

Lafleur, Jarret

2013-01-01

PredGuid+A software was developed to enable a unique numerical predictor-corrector aerocapture guidance capability that builds on heritage Orion entry guidance algorithms. The software can be used for both planetary entry and aerocapture applications. Furthermore, PredGuid+A implements a new Delta-V minimization guidance option that can take the place of traditional targeting guidance and can result in substantial propellant savings. PredGuid+A allows the user to set a mode flag and input a target orbit's apoapsis and periapsis. Using bank angle control, the guidance will then guide the vehicle to the appropriate post-aerocapture orbit using one of two algorithms: Apoapsis Targeting or Delta-V Minimization (as chosen by the user). Recently, the PredGuid guidance algorithm was adapted for use in skip-entry scenarios for NASA's Orion multi-purpose crew vehicle (MPCV). To leverage flight heritage, most of Orion's entry guidance routines are adapted from the Apollo program.

SPERTI Terminal Building (PER604). Oblique view of front entry and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SPERT-I Terminal Building (PER-604). Oblique view of front entry and one side. Electrical transformers at right of building. Note "Butler" logo. Photographer: R.G. Larsen. Date: June 22, 1955. INEEL negative no. 55-1700 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

3. Underground blast doors, BC corridor, at entry to building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Underground blast doors, BC corridor, at entry to building 501, looking west - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

6. View of Building 802 towards front entry, facing south. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. View of Building 802 towards front entry, facing south. - Naval Air Station Fallon, 100-man Fallout Shelter, 800 Complex, off Carson Road near intersection of Pasture & Berney Roads, Fallon, Churchill County, NV

5. PHOTOCOPY OF DRAWING (1975 ELECTRICAL DRAWING BY THE STRATEGIC ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. PHOTOCOPY OF DRAWING (1975 ELECTRICAL DRAWING BY THE STRATEGIC AIR COMMAND, USAF) ELECTRICAL PLANS FOR BUILDING 768, SHEET 7 OF 8 - Vandenberg Air Force Base, Space Launch Complex 3, Entry Control Point, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

ENTRY ON SOUTHEAST SIDE (WILLISTON AVENUE ENTRY), VIEW FACING NORTHWEST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ENTRY ON SOUTHEAST SIDE (WILLISTON AVENUE ENTRY), VIEW FACING NORTHWEST. - Schofield Barracks Military Reservation, Quadrangle I Administration Building, Williston Avenue between Wright-Smith & Reilly Avenues, Wahiawa, Honolulu County, HI

8. SAC command center underground structure, building 501, basement entry, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. SAC command center underground structure, building 501, basement entry, machine room, April 11, 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

30. View from roof of Fwing of front entry to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. View from roof of F-wing of front entry to building 500, looking northwest - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

LOFT. Interior view of entry to reactor building, TAN650. Camera ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT. Interior view of entry to reactor building, TAN-650. Camera is inside entry (TAN-624) and facing north. At far end of domed chamber are penetrations in wall for electrical and other connections. Reactor and other equipment has been removed. Date: March 2004. INEEL negative no. HD-39-5-1 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Strategies/Behaviors That Successful Superintendents Use to Build Strong Relationships and Trust during Their Entry Period

ERIC Educational Resources Information Center

Green, C. K.

2012-01-01

The purpose of the study was to identify strategies/behaviors that successful superintendents used to build strong relationships and trust with their school boards within their entry period. The following research questions guided the study: (1) What strategies/behaviors are successful superintendents using to build strong relationships and trust…

SOUTHWEST REAR, SHOWING CLOSED ENTRY HATCH, BUILDING 1934. Looking north ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTHWEST REAR, SHOWING CLOSED ENTRY HATCH, BUILDING 1934. Looking north - Edwards Air Force Base, X-15 Engine Test Complex, Observation Bunker Types, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA

6. DETAIL OF ENTRY ON NORTH ELEVATION OF BUILDING 260 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. DETAIL OF ENTRY ON NORTH ELEVATION OF BUILDING 260 (STORAGE STRUCTURE) IN STORAGE AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

FAST CHOPPER BUILDING, TRA665. DETAIL OF STEEL DOOR ENTRY TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FAST CHOPPER BUILDING, TRA-665. DETAIL OF STEEL DOOR ENTRY TO LOWER LEVEL. CAMERA FACING NORTH. INL NEGATIVE NO. HD42-1. Mike Crane, Photographer, 3/2004 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

7. View into Building 802, front entry hall to "U" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. View into Building 802, front entry hall to "U" turn. Light and shower spigot seen through chain-link fence, facing east. - Naval Air Station Fallon, 100-man Fallout Shelter, 800 Complex, off Carson Road near intersection of Pasture & Berney Roads, Fallon, Churchill County, NV

15. BUILDING 324 INTERIOR, MASTER BEDROOM, FROM SOUTHEASTERN CORNER OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. BUILDING 324 INTERIOR, MASTER BEDROOM, FROM SOUTH-EASTERN CORNER OF ROOM, LOOKING NORTHWEST, WITH ENTRY FROM HALLWAY, ENTRY TO BATH AND CLOTHES CLOSET IN SEQUENCE FROM LEFT TO RIGHT. - Oakland Naval Supply Center, Commanding Officers Residences, Between E & F Streets, West of Fourth Street, Oakland, Alameda County, CA

76 FR 8395 - Issuance of a Presidential Permit Authorizing the Expansion, Renovation, Operation, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-14

... Department of State at such time as the construction authorized by this permit is begun, and again at such time as construction is completed, interrupted for more than ninety days or discontinued. Article 11... Administrative Building Entry and Exit Control Booths Roadways and related Infrastructure, Pathways, Parking Lots...

Effective Stack Design in Air Pollution Control.

ERIC Educational Resources Information Center

Clarke, John H.

1968-01-01

Stack design problems fall into two general caterories--(1) those of building re-entry, and (2) those of general area pollution. Extensive research has developed adequate information, available in the literature, to permit effective stack design. A major roadblock to effective design has been the strong belief by architects and engineers that high…

21. Typical 2bedroom apartment with entry into den, hallway with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Typical 2-bedroom apartment with entry into den, hallway with bathroom and bedrooms (right). Entry to kitchen (left). - Techwood Homes, Building No. 5, 467 Techwood Drive & 114-120 Pine Street, Atlanta, Fulton County, GA

27. Typical 2bedroom apartment with entry into den, hallway with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Typical 2-bedroom apartment with entry into den, hallway with bathroom and bedrooms (left), entry to kitchen (right) - Techwood Homes, Building No. 6, 465 Techwood Drive & 119-125 Hunnicutt Street, Atlanta, Fulton County, GA

Raetrad model extensions for radon entry into multi-level buildings with basements or crawl spaces.

PubMed

Nielson, K K; Rogers, V C; Rogers, V; Holt, R B

1997-10-01

The RAETRAD model was generalized to characterize radon generation and movement from soils and building materials into multi-level buildings with basements or crawl spaces. With the generalization, the model retains its original simplicity and ease of use. The model calculates radon entry rates that are consistent with measurements published for basement test structures at Colorado State University, confirming approximately equal contributions from diffusion and pressure-driven air flow at indoor-outdoor air pressure differences of deltaP(i-o) = -3.5 Pa. About one-fourth of the diffusive radon entry comes from concrete slabs and three-fourths comes from the surrounding soils. Calculated radon entry rates with and without a barrier over floor-wall shrinkage cracks generally agree with Colorado State University measurements when a sustained pressure of deltaP(i-o) = -2 Pa is used to represent calm wind (<1 m s(-1)) conditions. Calculated radon distributions in a 2-level house also are consistent with published measurements and equations.

5. Exterior view, enclosure at walkin entry level between Test ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Exterior view, enclosure at walk-in entry level between Test Cell 6 (right) and Test Cell 7 (left), Systems Integration Laboratory Building (T-28), looking southwest. High pressure gas tank and generator test firings are conducted in the enclosure. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

Trace Contaminant Control for the International Space Station's Node 1- Analysis, Design, and Verification

NASA Technical Reports Server (NTRS)

Perry, J. L.

2017-01-01

Trace chemical contaminant generation inside crewed spacecraft cabins is a technical and medical problem that must be continuously evaluated. Although passive control through materials selection and active control by adsorption and catalytic oxidation devices is employed during normal operations of a spacecraft, contaminant buildup can still become a problem. Buildup is particularly troublesome during the stages between the final closure of a spacecraft during ground processing and the time that a crewmember enters for the first time during the mission. Typically, the elapsed time between preflight closure and first entry on orbit for spacecraft such as Spacelab modules was 30 days. During that time, the active contamination control systems are not activated and contaminants can potentially build up to levels which exceed the spacecraft maximum allowable concentrations (SMACs) specified by NASA toxicology experts. To prevent excessively high contamination levels at crew entry, the Spacelab active contamination control system was operated for 53 hours just before launch.

LOFT. Interior view of entry (TAN624) rollup door. Camera is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT. Interior view of entry (TAN-624) rollup door. Camera is inside entry building facing south. Rollup door was a modification of the original ANP door arrangement. Date: March 2004. INEEL negative no. HD-39-5-2 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Locality-Conscious Lock-Free Linked Lists

NASA Astrophysics Data System (ADS)

Braginsky, Anastasia; Petrank, Erez

We extend state-of-the-art lock-free linked lists by building linked lists with special care for locality of traversals. These linked lists are built of sequences of entries that reside on consecutive chunks of memory. When traversing such lists, subsequent entries typically reside on the same chunk and are thus close to each other, e.g., in same cache line or on the same virtual memory page. Such cache-conscious implementations of linked lists are frequently used in practice, but making them lock-free requires care. The basic component of this construction is a chunk of entries in the list that maintains a minimum and a maximum number of entries. This basic chunk component is an interesting tool on its own and may be used to build other lock-free data structures as well.

FLORIDA LARGE BUILDING STUDY - POLK COUNTY ADMINISTRATION BUILDING

EPA Science Inventory

The report describes an extensive characterization and parameter assessment study of a single, large building in Bartow, FL, with the purpose of assessing the impact on radon entry of design, construction, and operating features of the building, particularly the mechanical subsys...

Midwives and the Computerization of Perinatal Data Entry: The Theory of Beneficial Engagement.

PubMed

Craswell, Alison; Moxham, Lorna; Broadbent, Marc

2016-10-01

Theory building in nursing and midwifery both to explain and inform practice is important to advance these professions via provision of a theoretical foundation. This research explored the process of perinatal data entry undertaken by midwives to explore the impact of the movement from paper to computer collection of data. Use of grounded theory methodology enabled theory building, leading to a theoretical understanding of the phenomenon and development of the Theory of Beneficial Engagement grounded in the data. Methods involved in-depth semistructured interviews with 15 users of perinatal data systems. Participants were recruited from 12 different healthcare locations and were utilizing three different electronic systems for data entry. The research question that guided the study focused on examining the influences of using the computer for perinatal data entry. Findings indicated that qualities particular to some midwives denoted engagement with perinatal data entry, suggesting a strong desire to enter complete, timely, and accurate data. The Theory of Beneficial Engagement provides a model of user engagement with systems for perinatal data entry consistent with other theories of engagement. The theory developed describes this phenomenon in a simple, elegant manner that can be applied to other areas where mandatory data entry is undertaken.

INTERIOR VIEW, EASTWEST CORRIDOR SEEN THROUGH EAST SIDE ENTRY (NOTE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW, EAST-WEST CORRIDOR SEEN THROUGH EAST SIDE ENTRY (NOTE GLASS BLOCK TRANSOM PROVIDING LIGHT INTO CORRIDOR) - Greenbelt Community Building, 15 Crescent Road, Greenbelt, Prince George's County, MD

Interior building details of Building B, Room B004: south brick ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior building details of Building B, Room B-004: south brick wall partial painted brick plaster with stair scar trace, historic brick infilled arch entry way to Room C-001; southeasterly view - San Quentin State Prison, Building 22, Point San Quentin, San Quentin, Marin County, CA

Determination of serum IgG antibodies to Bacillus anthracis protective antigen in environmental sampling workers using a fluorescent covalent microsphere immunoassay.

PubMed

Biagini, R E; Sammons, D L; Smith, J P; Page, E H; Snawder, J E; Striley, C A F; MacKenzie, B A

2004-08-01

To evaluate potential exposure to Bacillis anthracis (Ba) spores in sampling/decontamination workers in the aftermath of an anthrax terror attack. Fifty six serum samples were obtained from workers involved in environmental sampling for Ba spores at the American Media, Inc. (AMI) building in Boca Raton, FL after the anthrax attack there in October 2001. Nineteen sera were drawn from individuals both pre-entry and several weeks after entrance into the building. Nine sera each were drawn from unique individuals at the pre-entry and follow up blood draws. Thirteen donor control sera were also evaluated. Individuals were surveyed for Ba exposure by measurement of serum Ba anti-protective antigen (PA) specific IgG antibodies using a newly developed fluorescent covalent microsphere immunoassay (FCMIA). Four sera gave positive anti-PA IgG results (defined as anti-PA IgG concentrations > or = the mean microg/ml anti-PA IgG from donor control sera (n = 13 plus 2 SD which were also inhibited > or = 85% when the serum was pre-adsorbed with PA). The positive sera were the pre-entry and follow up samples of two workers who had received their last dose of anthrax vaccine in 2000. It appears that the sampling/decontamination workers of the present study either had insufficient exposure to Ba spores to cause the production of anti-PA IgG antibodies or they were exposed to anthrax spores without producing antibody. The FCMIA appears to be a fast, sensitive, accurate, and precise method for the measurement of anti-PA IgG antibodies.

4. FRONT FACADE OF ENGINE TEST CELL BUILDING. DETAIL OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. FRONT FACADE OF ENGINE TEST CELL BUILDING. DETAIL OF MAIN ENTRY. LOOKING NORTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

27. View of entry door to vestibule to MWOC entry ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. View of entry door to vestibule to MWOC entry door in transmitter building no. 102 (note coded key pad to left and intercom phone on left) and door to the central systems monitor room (CSMR) to right (out of sight). - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

39 CFR 121.2 - Periodicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... published day-zero Critical Entry Time at origin, where the origin P&DC/F and SCF are in the same building... pair for which Periodicals are accepted before the day zero Critical Entry Time at origin and merged... day zero Critical Entry Time at origin, is the sum of 4 or 5 days, plus the number of additional days...

Within compound, from Guard Tower (Building 5762), looking southwest, Technical ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Guard Tower (Building 5762), looking southwest, Technical Equipment Building (Building 5760) to left, Microwave Tower (associated with Building 5769) and Civil Engineering Storage Building (Building 5766) to left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

LARGE BUILDING RADON MANUAL

EPA Science Inventory

The report summarizes information on how bilding systems -- especially the heating, ventilating, and air-conditioning (HVAC) system -- inclurence radon entry into large buildings and can be used to mitigate radon problems. It addresses the fundamentals of large building HVAC syst...

BLDG 101, CENTRAL ENTRY/ PASSAGE SHOWING LEAD FLOOR, STEEL WALLS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

BLDG 101, CENTRAL ENTRY/ PASSAGE SHOWING LEAD FLOOR, STEEL WALLS AND ASBESTOS CEILING - Naval Magazine Lualualei, Headquarters Branch, Operational Storage Building, Fifteenth Street near Kolekole Road intersection, Pearl City, Honolulu County, HI

14. NORTHWEST PARLOR, SHOWING BAY WINDOW AND DRYWALLED ENTRY TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. NORTHWEST PARLOR, SHOWING BAY WINDOW AND DRYWALLED ENTRY TO ADJACENT PARLOR. ROOM 2, HIRSHEN TRUMBO SECOND FLOOR PLAN. VIEW TO NORTH. - Davis-Byrne Building, 2134-2140 Dwight Way, Berkeley, Alameda County, CA

Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

GEM Building Taxonomy (Version 2.0)

USGS Publications Warehouse

Brzev, S.; Scawthorn, C.; Charleson, A.W.; Allen, L.; Greene, M.; Jaiswal, Kishor; Silva, V.

2013-01-01

/7/8/IRRE9/10/RSH3+RWO211/FW12/13/ which can be read as (1) Direction = [DX or DY] (the building has the same lateral load-resisting system in both directions); (2) Material = [Unreinforced Masonry + solid fired clay bricks + cement: lime mortar]; (3) Lateral Load-Resisting System = [Wall]; (4) Date of construction = [pre-1939]; (5) Heaight = [exactly 2 storeys]; (6) Occupancy = [residential, unknown type]; (7) Building Position = [unknown = no entry]; (8) Shape of building plan = [unknown = no entry]; (9) Structural irregularity = [regular]; (10) Exterior walls = [unknown = no entry]; (11) Roof = [Shape: pitched and hipped, Roof covering: clay tiles, Roof system material: wood, Roof system type: wood trusses]; (12) Floor = [Floor system: Wood, unknown]; (13) Foundation = [unknown = no entry]. Mapping of GEM Building Taxonomy to selected taxonomies is included in the report -- for example, the above building would be referenced by previous structural taxonomies as: PAGER-STR as UFB or UFB4, by the World Housing Encyclopedia as 7 or 8 and by the European Macroseismic Scale (98) as M5. The Building Taxonomy data model is highly flexible and has been incorporated within a relational database architecture. Due to its ability to represent building typologies using a shorthand form, it is also possible to use the taxonomy for non-database applications, and we discuss possible application of adaptation for Building Information Modelling (BIM) systems, and for the insurance industry. The GEM Building Taxonomy was independently evaluated and tested by the Earthquake Engineering Research Institute (EERI), which received 217 TaxT reports from 49 countries, representing a wide range of building typologies, including single and multi-storey buildings, reinforced and unreinforced masonry, confined masonry, concrete, steel, wood, and earthern buildings used for residential, commercial, industrial, and educational occupancy. Based on these submissions and other feedback, the EERI team validated that the GEM Building Taxonomy is highly functional, robust and able to describe different buildings around the world. The GEM Building Taxonomy is accompanied by supplementary resources. All terms have been explained in a companion online Glossary, which provides both text and graphic descriptions. The Taxonomy is accompanied by TaxT, a computer application that enables a user record information about a building or a building typology using the attributes of the GEM Building Taxonomy v2.0. TaxT can generate a taxonomy string and enable a user to generate a report in PDF format which summarizes the attribute values (s)he has chosen as representative of the building typology under consideration. The report concludes with recommendations for future development of the GEM Building Taxonomy. Appendices provide the detailed GEM Building Taxonomy tables and additional resource, as well as mappings to other taxonomies.

Exterior, looking west, Equipment Building to left, Tower at center, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Exterior, looking west, Equipment Building to left, Tower at center, Civil Engineering Storage Building (Building 5765) at left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

17. VIEW OF AIR LOCK ENTRY DOOR. BANKS OF AIR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. VIEW OF AIR LOCK ENTRY DOOR. BANKS OF AIR FILTERS ARE VISIBLE TO THE SIDES OF THE DOORS. THE BUILDING WAS DIVIDED INTO ZONES BY AIRLOCK DOORS AND AIR FILTERS. AIR PRESSURE DIFFERENTIALS WERE MAINTAINED IN THE ZONES, SUCH THAT AIRFLOW WAS PROGRESSIVELY TOWARD AREAS WITH THE HIGHEST POTENTIAL FOR CONTAMINATION. (9/24/91) - Rocky Flats Plant, Plutonium Manufacturing Facility, North-central section of Plant, just south of Building 776/777, Golden, Jefferson County, CO

24. Typical 1bedroom apartment, from entry hall, den (right) bedroom ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. Typical 1-bedroom apartment, from entry hall, den (right) bedroom (left), and kitchen (not shown) on left. - Techwood Homes, Building No. 5, 467 Techwood Drive & 114-120 Pine Street, Atlanta, Fulton County, GA

Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Civil Engineering Storage Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

1. WEST SIDE AND ENTRY, FROM ACROSS 3RD STREET, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. WEST SIDE AND ENTRY, FROM ACROSS 3RD STREET, LOOKING EAST. - Oakland Naval Supply Center, Administration Building-Dental Annex-Dispensary, Between E & F Streets, East of Third Street, Oakland, Alameda County, CA

7. INTERIOR, KITCHEN SOUTH OF CENTRAL EASTWEST CORRIDOR, FROM ENTRY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. INTERIOR, KITCHEN SOUTH OF CENTRAL EAST-WEST CORRIDOR, FROM ENTRY, LOOKING SOUTH. - Oakland Naval Supply Center, Administration Building-Dental Annex-Dispensary, Between E & F Streets, East of Third Street, Oakland, Alameda County, CA

Mechanisms and sources of radon entry in buildings constructed with modern technologies.

PubMed

Zhukovsky, M V; Vasilyev, A V

2014-07-01

To investigate the influence of modern building construction technologies on the accumulation of radon indoor, 20 rooms in buildings constructed using mostly monolithic concrete or aerated concrete blocks have been studied. Dominance of the diffusion mechanism of radon entry in buildings constructed with modern technologies has been established. As a result of computer simulations it was found that the main contribution to the variability of radon concentration was made by changes in the ventilation rate. At a low ventilation rate (<0.2 h(-1)) radon concentration above 200 Bq m(-3) can be observed for residential buildings. There is a need for the regulation of the radium-specific activity in building materials. According to the estimates of this study, the content of 226Ra in building materials should not exceed the value of 100 Bq kg(-1). © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Detail of northeast stair entry with vaulted stair landing and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of northeast stair entry with vaulted stair landing and ghost of former stair arch below stepped rail, facing west. - Marine Barracks, Panama Canal, Barracks Building, 100' North of Thatcher Highway, Balboa, Former Panama Canal Zone, CZ

Superintendent Communication Strategies and Experiences That Promote Trust and Positive Relationships with the School Board during the Entry Period: A Case Study

ERIC Educational Resources Information Center

Jimenez, Alfonso

2012-01-01

Superintendents have vast demands placed upon them by their school boards and via the political pipeline. The purpose of the study was to identify strategies/behaviors that successful superintendents used to build strong relationships and trust with their school boards within their entry period. It is during the entry period that determines…

Exterior building details of Building C, east façade: historic six ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Exterior building details of Building C, east façade: historic six light entry double door with three light transom, historic six light door with a one light transom, arch brick lintels and quoins, scored cement plaster finished brick walls; westerly view - San Quentin State Prison, Building 22, Point San Quentin, San Quentin, Marin County, CA

Within compound, from Gate House, looking northwest, Power Plant (Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Gate House, looking northwest, Power Plant (Building 5761) to left, Electrical Substation (Building 5770) and Supply Warehouse (Building 5768) center, Satellite Communications Terminal (Building 5771) to far left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

INFLUENCES OF HVAC DESIGN AND OPERATION ON RADON MITIGATION OF EXISTING SCHOOL BUILDINGS

EPA Science Inventory

The paper discusses various school building characteristics identified as influencing radon entry, the design and operation of installed mitigation systems in four Maryland schools, and the success of these systems in reducing school radon levels. Several public school buildings ...

Historic American Buildings Survey Marc Blair Photographer, summer 1966 WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Historic American Buildings Survey Marc Blair Photographer, summer 1966 WEST (entry) END with CHOIR LOFT - Grace Protestant Episcopal Church, 1041 Wisconsin Avenue Northwest, Washington, District of Columbia, DC

8. INTERIOR, EMERGENCY ROOM, NORTHEAST OF MAIN CORRIDOR INTERSECTION (NEAR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. INTERIOR, EMERGENCY ROOM, NORTHEAST OF MAIN CORRIDOR INTERSECTION (NEAR WESTERN, MAIN ENTRY), FROM ENTRY IN NORTHWESTERN CORNER, LOOKING SOUTHEAST. - Oakland Naval Supply Center, Administration Building-Dental Annex-Dispensary, Between E & F Streets, East of Third Street, Oakland, Alameda County, CA

Within compound, looking southeast Power Plant (Building 5761) to left, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, looking southeast Power Plant (Building 5761) to left, Satellite Communications Terminal (Building 5771), center - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Within compound, from Guard Tower, looking southeast, Power Plant (Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Guard Tower, looking southeast, Power Plant (Building 5761) to left, Satellite Communications Terminal (Building 5771) center, Supply Warehouse (Building 5768) to left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

6. Historic American Buildings Survey Russell Jones, Photographer February 1959 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Historic American Buildings Survey Russell Jones, Photographer February 1959 COLUMN DETAIL, ENTRY PORCH, 2620 K STREET, N.W. - Peter Houses, 2618-2620 K Street Northwest, Washington, District of Columbia, DC

Exterior oblique detail view of sidewalk entry at north side ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Exterior oblique detail view of sidewalk entry at north side of Building 3 from Bay Street sidewalk, looking southeast (with original steps revised to accommodate handicap ramp) - North Beach Place, 475 Bay Street, 475 Bay Street, San Francisco, San Francisco County, CA

LARGE BUILDINGS CHARACTERISTICS AS RELATED TO RADON RESISTANCE: A LITERATURE REVIEW

EPA Science Inventory

The report gives results of a literature review to determine to what useful extent buildings have been characterized and a data base developed in relation to radon entry and mitigation. Prior to 1993, most radon research in large buildings was focused on developing diagnostic and...

Within compound, looking northwest, Power Plant (Building 5761) and Guard ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, looking northwest, Power Plant (Building 5761) and Guard Tower (Building 5762) to left, Electrical Substation to right - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Exterior direct detail view of revised entry handicap ramp at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Exterior direct detail view of revised entry handicap ramp at east side of Building 7 (including 3-story trash dump tower), looking north - North Beach Place, 431 Bay Street, 530 Francisco Street, 431 Bay Street, 530 Francisco Street, San Francisco, San Francisco County, CA

13. Historic American Buildings Survey, Roy Oglesby, Photographer July 9, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Historic American Buildings Survey, Roy Oglesby, Photographer July 9, 1947 DETAIL OF ENTRY DOOR TO CHAPEL, EAST ELEVATION. - Old Fort Randall Church, Right Bank, Missouri River, Pickstown, Charles Mix County, SD

Transitioning to Low-GWP Alternatives in Building and Construction Foams

EPA Pesticide Factsheets

This fact sheet provides information on low-GWP foam blowing alternatives used in building and construction applications. It discusses HFC alternatives, market trends, challenges to market entry for alternatives, and potential solutions.

Change between Entry and Graduation in MSW Student Views on Social Work's Traditional Mission, Career Motivations, and Practice Preferences: Caucasian, Student of Color, and American Indian Group Comparisons

ERIC Educational Resources Information Center

Limb, Gordon E.; Organista, Kurt C.

2006-01-01

The current study builds on a previous study that examined change in student views on social work's traditional mission, career motivations, and practice preferences between entry into and graduation from master of social work programs. Results from 6,987 students at entry and 3,451 students at graduation showed that students at graduation…

VIEW OF BUILDING 111 LOOKING EAST, NORTHEAST. BUILDING 111, BUILT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF BUILDING 111 LOOKING EAST, NORTHEAST. BUILDING 111, BUILT IN 1953, WAS ONE OF THE FIRST TEN PERMANENT STRUCTURES ON THE ROCKY FLATS PLANT. THE BUILDING SERVED AS AN ENTRY POINT FOR SITE EMPLOYEES AND HOUSED A PRINT SHOP AND PHOTOGRAPHY LAB. (12/26/52) - Rocky Flats Plant, Offices, Print Shop & Photography Lab, Northwest quad of plant near terminus of Central Avenue, Golden, Jefferson County, CO

Stochastic modelling of temperatures affecting the in situ performance of a solar-assisted heat pump: The multivariate approach and physical interpretation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loveday, D.L.; Craggs, C.

Box-Jenkins-based multivariate stochastic modeling is carried out using data recorded from a domestic heating system. The system comprises an air-source heat pump sited in the roof space of a house, solar assistance being provided by the conventional tile roof acting as a radiation absorber. Multivariate models are presented which illustrate the time-dependent relationships between three air temperatures - at external ambient, at entry to, and at exit from, the heat pump evaporator. Using a deterministic modeling approach, physical interpretations are placed on the results of the multivariate technique. It is concluded that the multivariate Box-Jenkins approach is a suitable techniquemore » for building thermal analysis. Application to multivariate Box-Jenkins approach is a suitable technique for building thermal analysis. Application to multivariate model-based control is discussed, with particular reference to building energy management systems. It is further concluded that stochastic modeling of data drawn from a short monitoring period offers a means of retrofitting an advanced model-based control system in existing buildings, which could be used to optimize energy savings. An approach to system simulation is suggested.« less

Yes, Michael: Reflections on How Inclusion Can Build Social Skills.

ERIC Educational Resources Information Center

Anderson, Genan T.

2003-01-01

Describes a teacher's and preschool students' experiences with the classroom inclusion of an autistic child. Specifically addresses: (1) how social skills affect academic skills; (2) teaching social competency; (3) coaching group entry; (4) successful group entry and sustained social interaction; and (5) lessons learned from inclusion of a special…

IXV re-entry demonstrator: Mission overview, system challenges and flight reward

NASA Astrophysics Data System (ADS)

Angelini, Roberto; Denaro, Angelo

2016-07-01

The Intermediate eXperimental Vehicle (IXV) is an advanced re-entry demonstrator vehicle aimed to perform in-flight experimentation of atmospheric re-entry enabling systems and technologies. The IXV integrates key technologies at the system level, with significant advancements on Europe's previous flying test-beds. The project builds on previous achievements at system and technology levels, and provides a unique and concrete way of establishing and consolidating Europe's autonomous position in the strategic field of atmospheric re-entry. The IXV mission and system objectives are the design, development, manufacturing, assembling and on-ground to in-flight verification of an autonomous European lifting and aerodynamically controlled reentry system, integrating critical re-entry technologies at system level. Among such critical technologies of interest, special attention is paid to aerodynamic and aerothermodynamics experimentation, including advanced instrumentation for aerothermodynamics phenomena investigations, thermal protections and hot-structures, guidance, navigation and flight control through combined jets and aerodynamic surfaces (i.e. flaps), in particular focusing on the technologies integration at system level for flight. Following the extensive detailed design, manufacturing, qualification, integration and testing of the flight segment and ground segment elements, IXV has performed a full successful flight on February 11th 2015. After the launch with the VEGA launcher form the CSG spaceport in French Guyana, IXV has performed a full nominal mission ending with a successful splashdown in the Pacific Ocean. During Flight Phase, the IXV space and ground segments worked perfectly, implementing the whole flight program in line with the commanded maneuvers and trajectory prediction, performing an overall flight of 34.400 km including 7.600 km with hot atmospheric re-entry in automatic guidance, concluding with successful precision landing at a distance of ~1 km from the target, including the wind drift acting on the parachute from an altitude of 4.5 km.

Performance of Building Technology Graduates in the Construction Industry in Ghana

ERIC Educational Resources Information Center

Ayarkwa, J.; Dansoh, Ayirebi; Adinyira, E.; Amoah, P.

2011-01-01

Purpose: This paper aims to assess the perception of the Ghanaian construction industry of the performance of entry-level building technology graduates. Also, other non-technical skills or attributes expected from building technology graduates are to be compared with the actual proficiency of the graduates. Design/methodology/approach: The…

Strategies for Relationship and Trust Building by Successful Superintendents: A Case Study

ERIC Educational Resources Information Center

Huang, Leann L.

2012-01-01

The purpose of this study was to identify strategies and behaviors that successful superintendents used to build strong relationships and trust with their boards within their entry period. The three research questions were developed to guide this study: 1. What strategies and behaviors were successful superintendents using to build strong…

27 CFR 25.51 - Right of Entry and Examination.

Code of Federal Regulations, 2010 CFR

2010-04-01

... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Miscellaneous Provisions § 25.51 Right of Entry and... where beer is stored and may, when the premises are open at other times, enter those premises in the... owner of any building or place where beer is produced, made, or kept, or person having charge over such...

27 CFR 25.51 - Right of Entry and Examination.

Code of Federal Regulations, 2014 CFR

2014-04-01

... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Miscellaneous Provisions § 25.51 Right of Entry and... where beer is stored and may, when the premises are open at other times, enter those premises in the... owner of any building or place where beer is produced, made, or kept, or person having charge over such...

27 CFR 25.51 - Right of Entry and Examination.

Code of Federal Regulations, 2012 CFR

2012-04-01

... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Miscellaneous Provisions § 25.51 Right of Entry and... where beer is stored and may, when the premises are open at other times, enter those premises in the... owner of any building or place where beer is produced, made, or kept, or person having charge over such...

Entry to Vocations: Building the Foundations for Successful Transitions. Research Report

ERIC Educational Resources Information Center

Clarke, Kira

2014-01-01

Vocational education and training (VET) in Schools is intended to provide young people with an opportunity to develop skills for a range of vocational occupations as they complete their senior secondary certificates. This report draws together findings from all three years of the "Entry to Vocations" research project and presents a set…

75 FR 36091 - Notice of Availability of the Draft Environmental Impact Statement for Improvements to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

... for Improvements to the Calexico West Port of Entry, Calexico, CA AGENCY: Public Buildings Service... Impact Statement (EIS) for Improvements to the Calexico West Port of Entry, Calexico, California, for... and soils) or topic area (e.g., traffic, environmental justice). After the public comment period...

27 CFR 25.51 - Right of Entry and Examination.

Code of Federal Regulations, 2011 CFR

2011-04-01

... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Miscellaneous Provisions § 25.51 Right of Entry and... where beer is stored and may, when the premises are open at other times, enter those premises in the... owner of any building or place where beer is produced, made, or kept, or person having charge over such...

Defining Army Capabilities to Meet Building Partnership Capacity Requirements

DTIC Science & Technology

2012-05-17

111 Lolita C. Baldor, “U.S. officials plan deep changes in combat brigades,” Philly.com, entry posted January 26, 2012, http://articles.philly.com... Lolita C., “U.S. officials plan deep changes in combat brigades.” Philly.com, entry posted January 26, 2012, http://articles.philly.com/2012-01-26

Looking to the Future.

ERIC Educational Resources Information Center

College Planning & Management, 1997

1997-01-01

Ten possible trends on college campuses are examined. They include distance learning; rehabilitation of existing buildings; use of construction management firms; salaries for facilities directors; virtual universities; off-site garages; outside residence hall contractors; classrooms in residential buildings; and smart cards for entry and…

ACTIVE SOIL DEPRESSURIZATION (ASD) DEMONSTRATION IN A LARGE BUILDING

EPA Science Inventory

The report gives results of an evaluation of the feasibility of implementing radon resistant construction techniques -- especially active soil depressurization (ASD) -- in new large buildings in Florida. Indoor radon concentrations and radon entry were monitored in a finished bui...

Heatshield for Extreme Entry Environment Technology (HEEET) for Missions to Saturn and Beyond

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Chinnapongse, R.; Fowler, M.; Gasch, M.; Hamm, K.; Kazemba, C.; Ma, J.; Milos, F.; Nishioka, O.;

Heatshield for Extreme Entry Environment Technology (HEEET) - Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzaes, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status for NF Missions

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Hamm, K.;

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status

NASA Technical Reports Server (NTRS)

Ellerby, D.; Boghozian, T.; Driver, D.; Chavez-Garcia, J.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Kazemba, C.; Kellermann, C.;

6. Historic American Buildings Survey Russell Jones, Photographer April 1959 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Historic American Buildings Survey Russell Jones, Photographer April 1959 ENTRY - Southeast Area Survey, 101 & 122-124 Carroll Street (House), 1008 Potomac Street (House), Canal Street at Independence Avenue (Row House), 1016-1018 Potomac Street (House), Washington, District of Columbia, DC

RADON DIAGNOSTIC MEASUREMENT GUIDANCE FOR LARGE BUILDINGS - VOLUME 2. APPENDICES

EPA Science Inventory

The report discusses the development of radon diagnostic procedures and mitigation strategies applicable to a variety of large non-residential buildings commonly found in Florida. The investigations document and evaluate the nature of radon occurrence and entry mechanisms for rad...

RADON DIAGNOSTIC MEASUREMENT GUIDANCE FOR LARGE BUILDINGS - VOLUME 1. TECHNICAL REPORT

EPA Science Inventory

The report discusses the development of radon diagnostic procedures and mitigation strategies applicable to a variety of large non-residential buildings commonly found in Florida. The investigations document and evaluate the nature of radon occurrence and entry mechanisms for rad...

The process of development of a prioritization tool for a clinical decision support build within a computerized provider order entry system: Experiences from St Luke's Health System.

PubMed

Wolf, Matthew; Miller, Suzanne; DeJong, Doug; House, John A; Dirks, Carl; Beasley, Brent

2016-09-01

To establish a process for the development of a prioritization tool for a clinical decision support build within a computerized provider order entry system and concurrently to prioritize alerts for Saint Luke's Health System. The process of prioritizing clinical decision support alerts included (a) consensus sessions to establish a prioritization process and identify clinical decision support alerts through a modified Delphi process and (b) a clinical decision support survey to validate the results. All members of our health system's physician quality organization, Saint Luke's Care as well as clinicians, administrators, and pharmacy staff throughout Saint Luke's Health System, were invited to participate in this confidential survey. The consensus sessions yielded a prioritization process through alert contextualization and associated Likert-type scales. Utilizing this process, the clinical decision support survey polled the opinions of 850 clinicians with a 64.7 percent response rate. Three of the top rated alerts were approved for the pre-implementation build at Saint Luke's Health System: Acute Myocardial Infarction Core Measure Sets, Deep Vein Thrombosis Prophylaxis within 4 h, and Criteria for Sepsis. This study establishes a process for developing a prioritization tool for a clinical decision support build within a computerized provider order entry system that may be applicable to similar institutions. © The Author(s) 2015.

8. Detail, typical shedroofed entry on south side. The current ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Detail, typical shed-roofed entry on south side. The current project will replace these with similar structures that will allow handicap access to the lean-to portion of the building containing offices, restrooms, and other employee spaces. - Interurban Electric Railway Bridge Yard Shop, Interstate 80 at Alameda County Postmile 2.0, Oakland, Alameda County, CA

KSC-06pd2223

NASA Image and Video Library

2006-09-26

KENNEDY SPACE CENTER, FLA. - Workers mingle around the west door entry to the crew exploration vehicle (CEV) environment in the Operations and Checkout Building. A ribbon-cutting officially reactivated the entry. During the rest of the decade, KSC will transition from launching space shuttles to launching new vehicles in NASA’s Vision For Space Exploration. Photo credit: NASA/Kim Shiflett

Building a Nation That Works: Designing TANF for the Workplace.

ERIC Educational Resources Information Center

Jobs for the Future, Boston, MA.

Temporary Assistance to Needy Families (TANF) needs to focus more directly on what happens in the workplace and consider the needs of employers. Employers identify skill levels of both job applicants and employees as a major obstacle to employing and retaining TANF recipients and other entry-level workers as well as the cost of entry-level…

Building SDN-Based Agricultural Vehicular Sensor Networks Based on Extended Open vSwitch.

PubMed

Huang, Tao; Yan, Siyu; Yang, Fan; Pan, Tian; Liu, Jiang

2016-01-19

Software-defined vehicular sensor networks in agriculture, such as autonomous vehicle navigation based on wireless multi-sensor networks, can lead to more efficient precision agriculture. In SDN-based vehicle sensor networks, the data plane is simplified and becomes more efficient by introducing a centralized controller. However, in a wireless environment, the main controller node may leave the sensor network due to the dynamic topology change or the unstable wireless signal, leaving the rest of network devices without control, e.g., a sensor node as a switch may forward packets according to stale rules until the controller updates the flow table entries. To solve this problem, this paper proposes a novel SDN-based vehicular sensor networks architecture which can minimize the performance penalty of controller connection loss. We achieve this by designing a connection state detection and self-learning mechanism. We build prototypes based on extended Open vSwitch and Ryu. The experimental results show that the recovery time from controller connection loss is under 100 ms and it keeps rule updating in real time with a stable throughput. This architecture enhances the survivability and stability of SDN-based vehicular sensor networks in precision agriculture.

Building SDN-Based Agricultural Vehicular Sensor Networks Based on Extended Open vSwitch

PubMed Central

Huang, Tao; Yan, Siyu; Yang, Fan; Pan, Tian; Liu, Jiang

2016-01-01

Software-defined vehicular sensor networks in agriculture, such as autonomous vehicle navigation based on wireless multi-sensor networks, can lead to more efficient precision agriculture. In SDN-based vehicle sensor networks, the data plane is simplified and becomes more efficient by introducing a centralized controller. However, in a wireless environment, the main controller node may leave the sensor network due to the dynamic topology change or the unstable wireless signal, leaving the rest of network devices without control, e.g., a sensor node as a switch may forward packets according to stale rules until the controller updates the flow table entries. To solve this problem, this paper proposes a novel SDN-based vehicular sensor networks architecture which can minimize the performance penalty of controller connection loss. We achieve this by designing a connection state detection and self-learning mechanism. We build prototypes based on extended Open vSwitch and Ryu. The experimental results show that the recovery time from controller connection loss is under 100 ms and it keeps rule updating in real time with a stable throughput. This architecture enhances the survivability and stability of SDN-based vehicular sensor networks in precision agriculture. PMID:26797616

An Efficient User Interface Design for Nursing Information System Based on Integrated Patient Order Information.

PubMed

Chu, Chia-Hui; Kuo, Ming-Chuan; Weng, Shu-Hui; Lee, Ting-Ting

2016-01-01

A user friendly interface can enhance the efficiency of data entry, which is crucial for building a complete database. In this study, two user interfaces (traditional pull-down menu vs. check boxes) are proposed and evaluated based on medical records with fever medication orders by measuring the time for data entry, steps for each data entry record, and the complete rate of each medical record. The result revealed that the time for data entry is reduced from 22.8 sec/record to 3.2 sec/record. The data entry procedures also have reduced from 9 steps in the traditional one to 3 steps in the new one. In addition, the completeness of medical records is increased from 20.2% to 98%. All these results indicate that the new user interface provides a more user friendly and efficient approach for data entry than the traditional interface.

Curriculum Guide for Building Construction.

ERIC Educational Resources Information Center

Oregon State Board of Education, Salem.

This guide outlines the basic skills and knowledge necessary for entry-level competencies in the field of building construction, or for entrance into a post-high school or university program. The introductory section includes (1) brief job descriptions from the "Dictionary of Occupational Titles" for the seven key occupations represented…

Insights on Technology Innovation - A Review of the U.S. Department of Energy Solar Decathlon Competition Entries 2002-2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, Joseph J; Doris, Elizabeth S; Farrar, Sara L

The U.S. Department of Energy (DOE) Solar Decathlon is a collegiate competition that challenges student teams to design and build full-size, solar-powered houses. Because of balanced design priorities of architecture, engineering, innovation, performance, and energy use, teams have focused on a range of technologies in the built environment, from wall materials to home control systems, from electric lighting to HVAC equipment, and from geothermal to solar photovoltaic technology. This report provides insights into building technology innovation from a review of the Solar Decathlon competition entry designs, anecdotal experiences, and related market reports. The report describes example case studies of themore » evolution of technology solutions over time to illustrate the innovative, market-driving nature of the Solar Decathlon. It charts technologies utilized in the team designs over seven competitions and compares those to broader market adoption. It is meant to illustrate the technology innovation aspects of the competition, not to be a comprehensive or quantitative analysis. Solar Decathlon also has impacts on public perception of innovative technologies as well as workforce development through the thousands of participating students. The focus of these case studies is to showcase how it contributes to marketplace adoption of innovative energy technologies.« less

The Use of Functional Assessment and Frequency Building Procedures to Increase Product Knowledge and Data Entry Skills among Foremen in a Construction Organization

ERIC Educational Resources Information Center

Pampino, Ralph N.; Wilder, David A.; Binder, Carl

2005-01-01

A functional assessment procedure, which was designed to identify insufficient skills that may have been responsible for employee performance problems, was administered to four foremen employed in a large construction organization. Results of this assessment procedure identified two skill areas, product knowledge and data entry, as deficient.…

6. Exterior view, showing structural details and instrumentation at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Exterior view, showing structural details and instrumentation at the walk-in entry level (bottom) of Test Cell 6, Systems Integration Laboratory Building (T-28), looking southwest. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

7. Exterior view, showing instrumentation and gauge panel at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Exterior view, showing instrumentation and gauge panel at the walk-in entry level (bottom) of Test Cell 6, Systems Integration Laboratory Building (T-28), looking west. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

10. Exterior view, showing the structural details and tanks above ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Exterior view, showing the structural details and tanks above at walk-in entry level (bottom) of Test Cell 7, Systems Integration Laboratory Building (T-28), looking west. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

Looking northwest, Face B Array to left, Face C (rear) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northwest, Face B Array to left, Face C (rear) center, Power Plant (Building 5761), to right - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

SOUTHWEST SIDE AND SOUTHEAST FRONT, BUILDING 1932. OBSERVATION WINDOWS ARE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTHWEST SIDE AND SOUTHEAST FRONT, BUILDING 1932. OBSERVATION WINDOWS ARE BEHIND THE METAL GRATING. ENTRY HATCH IS ON NORTHWEST FACADE - Edwards Air Force Base, X-15 Engine Test Complex, Observation Bunker Types, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA

Easing the Discovery of NASA and International Near-Real-Time Data Using the Global Change Master Directory

NASA Astrophysics Data System (ADS)

Ritz, S.; Olsen, L. M.; Morahan, M.; Stevens, T.; Aleman, A.; Grebas, S. K.

2011-12-01

The Global Change Master Directory (GCMD) provides an extensive directory of descriptive and spatial information about data sets and data-related services, which are relevant to Earth science research. The directory's data discovery components include controlled keywords, free-text searches, and map/date searches. The GCMD portal for NASA's Land Atmosphere Near-real-time Capability for EOS (LANCE) data products leverages these discovery features by providing users a direct route to NASA's Near-Real-Time (NRT) collections. This portal offers direct access to collection entries by instrument name, informing users of the availability of data. After a relevant collection entry is found through the GCMD's search components, the "Get Data" URL within the entry directs the user to the desired data. Building on the importance of Near-Real-Time (NRT) data, the Committee on Earth Observation Satellites (CEOS) International Directory Network (IDN) is targeting an effort to identify NRT data set collections from the CEOS international members. The international collections will be advertised as the "CEOS IDN NRT" portal to assist users in rapidly discovering these products, which are potentially useful for their research or public response. [This portal is expected to be released in 2012.

Building an automated problem list based on natural language processing: lessons learned in the early phase of development.

PubMed

Solti, Imre; Aaronson, Barry; Fletcher, Grant; Solti, Magdolna; Gennari, John H; Cooper, Melissa; Payne, Tom

2008-11-06

Detailed problem lists that comply with JCAHO requirements are important components of electronic health records. Besides improving continuity of care electronic problem lists could serve as foundation infrastructure for clinical trial recruitment, research, biosurveillance and billing informatics modules. However, physicians rarely maintain problem lists. Our team is building a system using MetaMap and UMLS to automatically populate the problem list. We report our early results evaluating the application. Three physicians generated gold standard problem lists for 100 cardiology ambulatory progress notes. Our application had 88% sensitivity and 66% precision using a non-modified UMLS dataset. The systemâs misses concentrated in the group of ambiguous problem list entries (Chi-square=27.12 p<0.0001). In addition to the explicit entries, the notes included 10% implicit entry candidates. MetaMap and UMLS are readily applicable to automate the problem list. Ambiguity in medical documents has consequences for performance evaluation of automated systems.

Entry Vehicle Control System Design for the Mars Smart Lander

NASA Technical Reports Server (NTRS)

Calhoun, Philip C.; Queen, Eric M.

2002-01-01

The NASA Langley Research Center, in cooperation with the Jet Propulsion Laboratory, participated in a preliminary design study of the Entry, Descent and Landing phase for the Mars Smart Lander Project. This concept utilizes advances in Guidance, Navigation and Control technology to significantly reduce uncertainty in the vehicle landed location on the Mars surface. A candidate entry vehicle controller based on the Reaction Control System controller for the Apollo Lunar Excursion Module digital autopilot is proposed for use in the entry vehicle attitude control. A slight modification to the phase plane controller is used to reduce jet-firing chattering while maintaining good control response for the Martian entry probe application. The controller performance is demonstrated in a six-degree-of-freedom simulation with representative aerodynamics.

Building Bridges to the Economic Mainstream for African American Male Ex-Offenders: A Preliminary Assessment of an Inmate Education Re-Entry Program.

ERIC Educational Resources Information Center

Johnson, James H., Jr.; Farrell, Walter C., Jr.; Braithwaite, Lawrence P.

This paper describes a state-funded inmate education and re-entry program that provides soft skills training for soon-to-be released offenders. The paper presents preliminary evidence regarding the impact of this training on 14 young male participants. Data came from information prepared by inmates throughout the training program and ethnographic…

22. Photocopy of Drawing (November 1934 Architectural Drawings by Burge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopy of Drawing (November 1934 Architectural Drawings by Burge and Stevens, in Possession of the Engineering and Capital Improvements Department of the Atlanta Housing Authority, Atlanta, Georgia). SECTION AND ELEVATION, TYPE 'A' STAIR AND ENTRY, SECTION AND ELEVATION, TYPE 'C' AND 'D' STAIR AND ENTRY, TECHWOOD PROJECT #1101, SHEET A-50. - Techwood Homes, Building No. 1, 575-579 Techwood Drive, Atlanta, Fulton County, GA

Simulating the effect of slab features on vapor intrusion of crack entry

PubMed Central

Yao, Yijun; Pennell, Kelly G.; Suuberg, Eric M.

2012-01-01

In vapor intrusion screening models, a most widely employed assumption in simulating the entry of contaminant into a building is that of a crack in the building foundation slab. Some modelers employed a perimeter crack hypothesis while others chose not to identify the crack type. However, few studies have systematically investigated the influence on vapor intrusion predictions of slab crack features, such as the shape and distribution of slab cracks and related to this overall building foundation footprint size. In this paper, predictions from a three-dimensional model of vapor intrusion are used to compare the contaminant mass flow rates into buildings with different foundation slab crack features. The simulations show that the contaminant mass flow rate into the building does not change much for different assumed slab crack shapes and locations, and the foundation footprint size does not play a significant role in determining contaminant mass flow rate through a unit area of crack. Moreover, the simulation helped reveal the distribution of subslab contaminant soil vapor concentration beneath the foundation, and the results suggest that in most cases involving no biodegradation, the variation in subslab concentration should not exceed an order of magnitude, and is often significantly less than this. PMID:23359620

2. INTERIOR VIEW OF ENTRY CONTROL POINT (BLDG. 768) FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. INTERIOR VIEW OF ENTRY CONTROL POINT (BLDG. 768) FROM SOUTHWEST CORNER - Vandenberg Air Force Base, Space Launch Complex 3, Entry Control Point, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

How to Build Your Own Document Camera for around $100

ERIC Educational Resources Information Center

Van Orden, Stephen

2010-01-01

Document cameras can have great utility in second language classrooms. However, entry-level consumer document cameras start at around $350. This article describes how the author built three document cameras and offers suggestions for how teachers can successfully build their own quality document camera using a webcam for around $100.

Custodial Services and Building Maint: Performance Objectives.

ERIC Educational Resources Information Center

Downing, Charles; And Others

Several intermediate performance objectives and corresponding criterion measures are listed for each of 14 terminal objectives for high school custodial service and building maintenance course (the third year of a 3-year program). The materials were developed for a 36-week course (3 hours daily) designed to prepare 12th graders with entry level…

5. DETAIL VIEW OF THE EGYPTIAN MOTIF DECORATIVE ELEMENTS OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. DETAIL VIEW OF THE EGYPTIAN MOTIF DECORATIVE ELEMENTS OF BUILDING 1'S MAIN ENTRY TOWER (INCLUDING THE ENGAGED COLUMN CAPITALS, PILASTERS & CAPITALS, CORNICES, AND TERRA COTTA EAGLES); LOOKING SW FROM THE E WING ROOF. (Ryan) - Veterans Administration Medical Center, Building No. 1, Old State Route 13 West, Marion, Williamson County, IL

32. Photocopy of photograph, ca. 1930 (original print on file ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. Photocopy of photograph, ca. 1930 (original print on file at U.S. Army Intelligence Security Command, Fort Belvoir, Virginia). INTERIOR VIEW TO WEST OF FIRST FLOOR ROOM TO NORTHWEST OF MAIN ENTRY IN MAIN BUILDING OF ARLINGTON HALL JUNIOR COLLEGE. - Arlington Hall Station, Main Building, 4000 Arlington Boulevard, Arlington, Arlington County, VA

A data storage, retrieval and analysis system for endocrine research. [for Skylab

NASA Technical Reports Server (NTRS)

Newton, L. E.; Johnston, D. A.

1975-01-01

This retrieval system builds, updates, retrieves, and performs basic statistical analyses on blood, urine, and diet parameters for the M071 and M073 Skylab and Apollo experiments. This system permits data entry from cards to build an indexed sequential file. Programs are easily modified for specialized analyses.

47 CFR 68.105 - Minimum point of entry (MPOE) and demarcation point.

Code of Federal Regulations, 2010 CFR

2010-10-01

... be either the closest practicable point to where the wiring crosses a property line or the closest practicable point to where the wiring enters a multiunit building or buildings. The reasonable and... situations. (c) Single unit installations. For single unit installations existing as of August 13, 1990, and...

Window type: paired 2x4 multipaned steel windows flanked by 1x4 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Window type: paired 2x4 multipaned steel windows flanked by 1x4 multipaned steel casements, breaking building corner. Raised panel door front entry also illustrated. Ground floor detail Building 19, facing north - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

44 CFR 60.3 - Flood plain management criteria for flood-prone areas.

Code of Federal Regulations, 2010 CFR

2010-10-01

... improvements, that fully enclosed areas below the lowest floor that are usable solely for parking of vehicles... that they permit the automatic entry and exit of floodwaters. (6) Require that manufactured homes that... building standards. Such enclosed space shall be useable solely for parking of vehicles, building access...

44 CFR 60.3 - Flood plain management criteria for flood-prone areas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... improvements, that fully enclosed areas below the lowest floor that are usable solely for parking of vehicles... that they permit the automatic entry and exit of floodwaters. (6) Require that manufactured homes that... building standards. Such enclosed space shall be useable solely for parking of vehicles, building access...

"I Myself Want to Build": Women, Architectural Education and the Integration of Germany's Technical Colleges

ERIC Educational Resources Information Center

Stratigakos, Despina

2007-01-01

This article reconstructs women's entry into the architecture classrooms of Germany's "Technische Hochschulen," which were, and remain, the nation's primary institutions for training architects. Created in the 1860s and '70s to supply an industrializing nation with well-educated engineers and building officials, these elite colleges…

Navigation Challenges of the Mars Phoenix Lander Mission

NASA Technical Reports Server (NTRS)

Portock, Brian M.; Kruizinga, Gerhard; Bonfiglio, Eugene; Raofi, Behzad; Ryne, Mark

2008-01-01

The Mars Phoenix Lander mission was launched on August 4th, 2007. To land safely at the desired landing location on the Mars surface, the spacecraft trajectory had to be controlled to a set of stringent atmospheric entry and landing conditions. The landing location needed to be controlled to an elliptical area with dimensions of 100km by 20km. The two corresponding critical components of the atmospheric entry conditions are the entry flight path angle (target: -13.0 deg +/-0.21 deg) and the entry time (within +/-30 seconds). The purpose of this paper is to describe the navigation strategies used to overcome the challenges posed during spacecraft operations, which included an attitude control thruster calibration campaign, a trajectory control strategy, and a trajectory reconstruction strategy. Overcoming the navigation challenges resulted in final Mars atmospheric entry conditions just 0.007 deg off in entry flight path angle and 14.9 sec early in entry time. These entry dispersions in addition to the entry, descent, and landing trajectory dispersion through the atmosphere, lead to a final landing location just 7 km away from the desired landing target.

Contamination control of the space shuttle Orbiter crew compartment

NASA Technical Reports Server (NTRS)

Bartelson, Donald W.

1986-01-01

Effective contamination control as applied to manned space flight environments is a discipline characterized and controlled by many parameters. An introduction is given to issues involving Orbiter crew compartment contamination control. An effective ground processing contamination control program is an essential building block to a successful shuttle mission. Personnel are required to don cleanroom-grade clothing ensembles before entering the crew compartment and follow cleanroom rules and regulations. Prior to crew compartment entry, materials and equipment must be checked by an orbiter integrity clerk stationed outside the white-room entrance for compliance to program requirements. Analysis and source identification of crew compartment debris studies have been going on for two years. The objective of these studies is to determine and identify particulate generating materials and activities in the crew compartment. Results show a wide spectrum of many different types of materials. When source identification is made, corrective action is implemented to minimize or curtail further contaminate generation.

Responding to Communicable Diseases in Internationally Mobile Populations at Points of Entry and along Porous Borders, Nigeria, Benin, and Togo

PubMed Central

Rogers, Kimberly; Ward, Sarah; Ojo, Olubumni; Kakaī, Clement Glele; Agbeko, Tamekloe Tsidi; Garba, Hassan; MacGurn, Amanda; Oppert, Marydale; Kone, Idrissa; Bamsa, Olutola; Schneider, Dana; Brown, Clive

2017-01-01

Recent multinational disease outbreaks demonstrate the risk of disease spreading globally before public health systems can respond to an event. To ensure global health security, countries need robust multisectoral systems to rapidly detect and respond to domestic or imported communicable diseases. The US Centers for Disease Control and Prevention International Border Team works with the governments of Nigeria, Togo, and Benin, along with Pro-Health International and the Abidjan-Lagos Corridor Organization, to build sustainable International Health Regulations capacities at points of entry (POEs) and along border regions. Together, we strengthen comprehensive national and regional border health systems by developing public health emergency response plans for POEs, conducting qualitative assessments of public health preparedness and response capacities at ground crossings, integrating internationally mobile populations into national health surveillance systems, and formalizing cross-border public health coordination. Achieving comprehensive national and regional border health capacity, which advances overall global health security, necessitates multisectoral dedication to the aforementioned components. PMID:29155668

Responding to Communicable Diseases in Internationally Mobile Populations at Points of Entry and along Porous Borders, Nigeria, Benin, and Togo.

PubMed

Merrill, Rebecca D; Rogers, Kimberly; Ward, Sarah; Ojo, Olubumni; Kakaī, Clement Glele; Agbeko, Tamekloe Tsidi; Garba, Hassan; MacGurn, Amanda; Oppert, Marydale; Kone, Idrissa; Bamsa, Olutola; Schneider, Dana; Brown, Clive

2017-12-01

Recent multinational disease outbreaks demonstrate the risk of disease spreading globally before public health systems can respond to an event. To ensure global health security, countries need robust multisectoral systems to rapidly detect and respond to domestic or imported communicable diseases. The US Centers for Disease Control and Prevention International Border Team works with the governments of Nigeria, Togo, and Benin, along with Pro-Health International and the Abidjan-Lagos Corridor Organization, to build sustainable International Health Regulations capacities at points of entry (POEs) and along border regions. Together, we strengthen comprehensive national and regional border health systems by developing public health emergency response plans for POEs, conducting qualitative assessments of public health preparedness and response capacities at ground crossings, integrating internationally mobile populations into national health surveillance systems, and formalizing cross-border public health coordination. Achieving comprehensive national and regional border health capacity, which advances overall global health security, necessitates multisectoral dedication to the aforementioned components.

LOFT complex, camera facing west. Mobile entry (TAN624) is position ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT complex, camera facing west. Mobile entry (TAN-624) is position next to containment building (TAN-650). Shielded roadway entrance in view just below and to right of stack. Borated water tank has been covered with weather shelter and is no longer visible. ANP hangar (TAN-629) in view beyond LOFT. Date: 1974. INEEL negative no. 74-4191 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Mass Spectrometry for Planetary Probes: Past, Present and Future

NASA Technical Reports Server (NTRS)

Niemann, Hasso B.; Harpold, Dan N.; Jamieson, Brian G.; Mahaffy, Paul R.

2005-01-01

Atmospheric entry probes present a unique opportunity for performing quantitative analysis of extra-terrestrial atmospheres in cases where remote sensing alone may not be sufficient and measurements with balloons or aircraft is not practical. An entry probe can provide a complete vertical profile of atmospheric parameters including chemical composition, which cannot be obtained with most other techniques. There are, however, unique challenges associated with building instruments for an entry probe, as compared to orbiters, landers, or rovers. Conditions during atmospheric entry are extreme, there are inherent time constraints due to the short duration of the experiment, and the instrument experiences rapid environmental changes in temperature and pressure as it descends. In addition, there are resource limitations, i.e. mass, power, size and bandwidth. Finally, the demands on the instrument design are determined in large part by conditions (pressure, temperature, composition) unique to the particular body under study, and as a result there is no one-size-fits-all instrument for an atmospheric probe. Many of these requirements can be more easily met by miniaturizing the probe instrument. Our experience building mass spectrometers for atmospheric entry probes leads us to believe that the time is right for a fundamental change in the way spaceflight mass spectrometers are built. The emergence over the past twenty years of Micro-electro- mechanical Systems (MEMS), utilizing lithographic semiconductor fabrication techniques to produce instrument systems in miniature, holds great promise for application to spaceflight mass spectrometry. A highly miniaturized, high performance and low-power mass spectrometer would be an enormous benefit to future entry probe missions, allowing, for example, parallel measurements (e.g., multiple simultaneous gas chromatographic analyses and direct atmospheric leaks.) Such an instrument would also enable mass spectrometry on board small multiple entry probes. In the development of a MEMS Mass Spectrometer, the challenge facing us is to move beyond the proof-of-concept, where research dollars tend to focus, and carry out the detailed work of developing a high performance mass spectrometer system on a chip which meets the unique technical requirements for an atmospheric entry probe described above.

11. Exterior view, showing instrumentation and gauge panel at walkin ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Exterior view, showing instrumentation and gauge panel at walk-in entry level (bottom) of Test Cell 7, Systems Integration Laboratory Building (T-28), looking west. Metal stair at left leads to working platform levels surrounding test cell. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

JAE: A Jupiter Atmospheric Entry Probe Heating Code

NASA Technical Reports Server (NTRS)

Wercinski, Paul F.; Tauber, Michael E.; Yang, Lily

1997-01-01

The strong gravitational attraction of Jupiter on probes approaching the planet results in very high atmospheric entry velocities. The values relative to the rotating atmosphere can vary from about 47 to 60 km/sec, depending on the latitude of the entry. Therefore, the peak heating rates and heat shield mass fractions exceed those for any other atmospheric entries. For example, the Galileo probe's heat shield mass fraction was 50%, of which 45% was devoted to the forebody. Although the Galileo probe's mission was very successful, many more scientific questions about the Jovian atmosphere remain to be answered and additional probe missions are being planned. Recent developments in microelectronics have raised the possibility of building smaller and less expensive probes than Galileo. Therefore, it was desirable to develop a code that could quickly compute the forebody entry heating environments when performing parametric probe sizing studies. The Jupiter Atmospheric Entry (JAE) code was developed to meet this requirement. The body geometry consists of a blunt-nosed conical shape of arbitrary nose and base radius and cone angles up to about 65 deg at zero angle of attack.

41 CFR 101-30.304 - Application of item entry control.

Code of Federal Regulations, 2012 CFR

2012-07-01

... entry control. 101-30.304 Section 101-30.304 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.3-Cataloging Items of Supply § 101-30.304 Application of item entry control. In addition...

University of Glasgow at TREC 2009: Experiments with Terrier

DTIC Science & Technology

2009-11-01

identify entities in the category B subset of the corpus, we resort to an efficient dictionary -based named en- tity recognition approach.4 In particular...we build a large dictio- nary of entity names using DBPedia,5 a structured representation of Wikipedia. Dictionary entries comprise all known...aliases for each unique entity, as obtained from DBPedia (e.g., ‘Barack Obama’ is represented by the dictionary entries ‘Barack Obama’ and ‘44th President

Dangerous (toxic) atmospheres in UK wood pellet and wood chip fuel storage.

PubMed

Simpson, Andrew T; Hemingway, Michael A; Seymour, Cliff

2016-09-01

There is growing use of wood pellet and wood chip boilers in the UK. Elsewhere fatalities have been reported, caused by carbon monoxide poisoning following entry into wood pellet storage areas. The aim of this work was to obtain information on how safely these two fuels are being stored in the UK. Site visits were made to six small-scale boiler systems and one large-scale pellet warehouse, to assess storage practice, risk management systems and controls, user knowledge, and potential for exposure to dangerous atmospheres. Real time measurements were made of gases in the store rooms and during laboratory tests on pellets and chips. Volatile organic compounds (VOCs) emitted and the microbiological content of the fuel was also determined. Knowledge of the hazards associated with these fuels, including confined space entry, was found to be limited at the smaller sites, but greater at the large pellet warehouse. There has been limited risk communication between companies supplying and maintaining boilers, those manufacturing and supplying fuel, and users. Risk is controlled by restricting access to the store rooms with locked entries; some store rooms have warning signs and carbon monoxide alarms. Nevertheless, some store rooms are accessed for inspection and maintenance. Laboratory tests showed that potentially dangerous atmospheres of carbon monoxide and carbon dioxide, with depleted levels of oxygen may be generated by these fuels, but this was not observed at the sites visited. Unplanned ventilation within store rooms was thought to be reducing the build-up of dangerous atmospheres. Microbiological contamination was confined to wood chips.

Dangerous (toxic) atmospheres in UK wood pellet and wood chip fuel storage

PubMed Central

Simpson, Andrew T.; Hemingway, Michael A.; Seymour, Cliff

2016-01-01

ABSTRACT There is growing use of wood pellet and wood chip boilers in the UK. Elsewhere fatalities have been reported, caused by carbon monoxide poisoning following entry into wood pellet storage areas. The aim of this work was to obtain information on how safely these two fuels are being stored in the UK. Site visits were made to six small-scale boiler systems and one large-scale pellet warehouse, to assess storage practice, risk management systems and controls, user knowledge, and potential for exposure to dangerous atmospheres. Real time measurements were made of gases in the store rooms and during laboratory tests on pellets and chips. Volatile organic compounds (VOCs) emitted and the microbiological content of the fuel was also determined. Knowledge of the hazards associated with these fuels, including confined space entry, was found to be limited at the smaller sites, but greater at the large pellet warehouse. There has been limited risk communication between companies supplying and maintaining boilers, those manufacturing and supplying fuel, and users. Risk is controlled by restricting access to the store rooms with locked entries; some store rooms have warning signs and carbon monoxide alarms. Nevertheless, some store rooms are accessed for inspection and maintenance. Laboratory tests showed that potentially dangerous atmospheres of carbon monoxide and carbon dioxide, with depleted levels of oxygen may be generated by these fuels, but this was not observed at the sites visited. Unplanned ventilation within store rooms was thought to be reducing the build-up of dangerous atmospheres. Microbiological contamination was confined to wood chips. PMID:27030057

The use of virtual reality and physical tools in the development and validation of ease of entry and exit in passenger vehicles.

PubMed

Lawson, Glyn; Herriotts, Paul; Malcolm, Louise; Gabrecht, Katharina; Hermawati, Setia

2015-05-01

Ease of entry and exit is important for creating a positive first impression of a car and increasing customer satisfaction. Several methods are used within vehicle development to optimise ease of entry and exit, including CAD reviews, benchmarking and buck trials. However, there is an industry trend towards digital methods to reduce the costs and time associated with developing physical prototypes. This paper reports on a study of entry strategy in three properties (buck, car, CAVE) in which inconsistencies were demonstrated by people entering a vehicle representation in the CAVE. In a second study industry practitioners rated the CAVE as worse than physical methods for identifying entry and exit issues, and having lower perceived validity and reliability. However, the resource issues associated with building bucks were recognised. Recommendations are made for developing the CAVE and for combinations of methods for use at different stages of a vehicle's development. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Simulation and experimental research on trans-media vehicle water-entry motion characteristics at low speed

PubMed Central

Yang, Jian; Feng, Jinfu; Hu, Junhua; Liu, An

2017-01-01

The motion characteristics of trans-media vehicles during the water-entry process were explored in this study in an effort to obtain the optimal water-entry condition of the vehicle for developing a novel, single control strategy integrating underwater non-control and in-air control. A water-entry dynamics model is established by combining the water-entry motion characteristics of the vehicle in uncontrolled conditions at low speed with time-varying parameters (e.g. buoyancy, added mass). A water-entry experiment is designed to confirm the effectiveness of the established model. After that, by comparing the experimental results with the simulated results, the model is further modified to more accurately reflect water-entry motion. The change laws of the vehicle’s attitude and position during the water-entry process are also obtained by analyzing the simulation of the modified model under different velocity, angle, and angle of attack conditions. The results presented here have guiding significance for the future realization of reaching the stable underwater navigation state of the vehicle after water-entry process. PMID:28558012

Simulation and experimental research on trans-media vehicle water-entry motion characteristics at low speed.

PubMed

Yang, Jian; Li, Yongli; Feng, Jinfu; Hu, Junhua; Liu, An

2017-01-01

The motion characteristics of trans-media vehicles during the water-entry process were explored in this study in an effort to obtain the optimal water-entry condition of the vehicle for developing a novel, single control strategy integrating underwater non-control and in-air control. A water-entry dynamics model is established by combining the water-entry motion characteristics of the vehicle in uncontrolled conditions at low speed with time-varying parameters (e.g. buoyancy, added mass). A water-entry experiment is designed to confirm the effectiveness of the established model. After that, by comparing the experimental results with the simulated results, the model is further modified to more accurately reflect water-entry motion. The change laws of the vehicle's attitude and position during the water-entry process are also obtained by analyzing the simulation of the modified model under different velocity, angle, and angle of attack conditions. The results presented here have guiding significance for the future realization of reaching the stable underwater navigation state of the vehicle after water-entry process.

Mid-L/D Lifting Body Entry Demise Analysis

NASA Technical Reports Server (NTRS)

Ling, Lisa

2017-01-01

The mid-lift-to-drag ratio (mid-L/D) lifting body is a fully autonomous spacecraft under design at NASA for enabling a rapid return of scientific payloads from the International Space Station (ISS). For contingency planning and risk assessment for the Earth-return trajectory, an entry demise analysis was performed to examine three potential failure scenarios: (1) nominal entry interface conditions with loss of control, (2) controlled entry at maximum flight path angle, and (3) controlled entry at minimum flight path angle. The objectives of the analysis were to predict the spacecraft breakup sequence and timeline, determine debris survival, and calculate the debris dispersion footprint. Sensitivity analysis was also performed to determine the effect of the initial pitch rate on the spacecraft stability and breakup during the entry. This report describes the mid-L/D lifting body and presents the results of the entry demise and sensitivity analyses.

77 FR 42484 - Application(s) for Duty-Free Entry of Scientific Instruments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-19

..., high-temperature metal alloys, evaporated metal films, silicon-germanium quantum dots, soils and... University, Department of Biological Sciences, 202 Life Sciences Building, Baton Rouge, LA 70803-1715...

Building Learning Communities: Partnerships, Social Capital and VET Performance. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Allison, Janelle; Gorringe, Scott; Lacey, Justine

2006-01-01

This study examines the nature of the impact of vocational education and training (VET), and its project-based activities and partnerships, on the development of sustainable communities in regional Australia. It finds that VET plays a critical role as the entry point to learning and builds considerable social and other forms of capital in regional…

4. EXTERIOR OF SOUTH END OF BUILDING 105 SHOWING TALL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. EXTERIOR OF SOUTH END OF BUILDING 105 SHOWING TALL RUSTIC STYLE CHIMNEY WITH GABLE FRAME, METAL ROOF, AND CONCRETE WALKWAY AND STEP TO OPEN SIDE-ENTRY DOOR AT PHOTO ENTER. ORIGINAL DECORATIVE WOOD SHIPLAP SIDING ON UPPER END GABLE HAS BEEN COVERED WITH ASPHALT SHINGLES. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

A&M. Radioactive parts security storage warehouses: TAN648 on left, and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Radioactive parts security storage warehouses: TAN-648 on left, and dolly storage building, TAN-647, on right. Camera facing south. This was the front entry for the warehouse and the rear of the dolly storage building. Date: August 6, 2003. INEEL negative no. HD-36-2-2 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Learning Team Breach of a Posted Barricade to Connect an Instrument to Power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilburn, Dianne Williams

On February 15, 2017, a DESHF-STO HPFC (health physics field coordinator) was asked by an NEN-1 employee if they could move an instrument, a radiation dosimetry system, from A166A to another lab at TA-35 Building 2. The HPFC walked the job down and discovered the instrument was connected to power. The instrument had not been connected to power previously. See photo 1. The instrument is located within an RCA (radiological control area). Entry to connect the instrument to power the instrument requires contacting RP. RP personnel had not been contacted as required as stated in the RCA posting.

STS-28 Columbia, OV-102, terminal countdown demonstration test (TCDT) at KSC

NASA Image and Video Library

1989-07-18

S89-41093 (9 Aug 1989) --- STS-28 Columbia, Orbiter Vehicle (OV) 102, mission specialist David C. Leestma relaxes in chair after donning launch and entry suit (LES) and launch and entry helmet (LEH). Technician in the background monitors LES systems. Leestma, along with fellow crewmembers, is participating in the terminal countdown demonstration test (TCDT) at the Kennedy Space Center (KSC) Operations and Checkout (O&C) Building. View provided by KSC with alternate number KSC-89PC-673.

78 FR 17384 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-21

...: Delete entry and replace with ``Records include individual's name; position title, grade, and job series... locked or guarded buildings, locked offices, or locked cabinets during non-duty hours.'' Retention and...

40 CFR 82.24 - Recordkeeping and reporting requirements for class II controlled substances.

Code of Federal Regulations, 2011 CFR

2011-07-01

... transformation; (v) The date on which the class II controlled substances were imported; (vi) The port of entry.... Customs entry form; (xiv) Dated records documenting the sale or transfer of class II controlled substances... source facility; (vii) The U.S. port of entry for the import, the expected date of shipment and the...

40 CFR 82.24 - Recordkeeping and reporting requirements for class II controlled substances.

Code of Federal Regulations, 2014 CFR

2014-07-01

... transformation; (v) The date on which the class II controlled substances were imported; (vi) The port of entry.... Customs entry form; (xiv) Dated records documenting the sale or transfer of class II controlled substances... source facility; (vii) The U.S. port of entry for the import, the expected date of shipment and the...

Apollo experience report: Guidance and control systems: Command and service module entry monitor subsystem

NASA Technical Reports Server (NTRS)

Reina, B., Jr.; Patterson, H. G.

1975-01-01

The conceptual aspects of the command and service module entry monitor subsystem, together with an interpretation of the displays and their associated relationship to entry trajectory control, are presented. The entry monitor subsystem is described, and the problems encountered during the developmental phase and the first five manned Apollo flights are discussed in conjunction with the design improvements implemented.

Guidance and Control Architecture Design and Demonstration for Low Ballistic Coefficient Atmospheric Entry

NASA Technical Reports Server (NTRS)

Swei, Sean

2014-01-01

We propose to develop a robust guidance and control system for the ADEPT (Adaptable Deployable Entry and Placement Technology) entry vehicle. A control-centric model of ADEPT will be developed to quantify the performance of candidate guidance and control architectures for both aerocapture and precision landing missions. The evaluation will be based on recent breakthroughs in constrained controllability/reachability analysis of control systems and constrained-based energy-minimum trajectory optimization for guidance development operating in complex environments.

Entry Atmospheric Flight Control Authority Impacts on GN and C and Trajectory Performance for Orion Exploration Flight Test 1

NASA Technical Reports Server (NTRS)

McNamara, Luke W.

2012-01-01

One of the key design objectives of NASA's Orion Exploration Flight Test 1 (EFT-1) is to execute a guided entry trajectory demonstrating GN&C capability. The focus of this paper is the ight control authority of the vehicle throughout the atmospheric entry ight to the target landing site and its impacts on GN&C, parachute deployment, and integrated performance. The vehicle's attitude control authority is obtained from thrusting 12 Re- action Control System (RCS) engines, with four engines to control yaw, four engines to control pitch, and four engines to control roll. The static and dynamic stability derivatives of the vehicle are determined to assess the inherent aerodynamic stability. The aerodynamic moments at various locations in the entry trajectory are calculated and compared to the available torque provided by the RCS system. Interaction between the vehicle's RCS engine plumes and the aerodynamic conditions are considered to assess thruster effectiveness. This document presents an assessment of Orion's ight control authority and its effectiveness in controlling the vehicle during critical events in the atmospheric entry trajectory.

Entry Guidance for the Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Lu, Ping

1999-01-01

The X-33 Advanced Technology Demonstrator is a half-scale prototype developed to test the key technologies needed for a full-scale single-stage reusable launch vehicle (RLV). The X-33 is a suborbital vehicle that will be launched vertically, and land horizontally. The goals of this research were to develop an alternate entry guidance scheme for the X-33 in parallel to the actual X-33 entry guidance algorithms, provide comparative and complementary study, and identify potential new ways to improve entry guidance performance. Toward these goals, the nominal entry trajectory is defined by a piecewise linear drag-acceleration-versus-energy profile, which is in turn obtained by the solution of a semi-analytical parameter optimization problem. The closed-loop guidance is accomplished by tracking the nominal drag profile with primarily bank-angle modulation on-board. The bank-angle is commanded by a single full-envelope nonlinear trajectory control law. Near the end of the entry flight, the guidance logic is switched to heading control in order to meet strict conditions at the terminal area energy management interface. Two methods, one on ground-track control and the other on heading control, were proposed and examined for this phase of entry guidance where lateral control is emphasized. Trajectory dispersion studies were performed to evaluate the effectiveness of the entry guidance algorithms against a number of uncertainties including those in propulsion system, atmospheric properties, winds, aerodynamics, and propellant loading. Finally, a new trajectory-regulation method is introduced at the end as a promising precision entry guidance method. The guidance principle is very different and preliminary application in X-33 entry guidance simulation showed high precision that is difficult to achieve by existing methods.

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2010 CFR

2010-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2011 CFR

2011-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

15 CFR 270.321 - Entry and inspection of property where building components, materials, artifacts, and records...

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence; Information Created Pursuant to...

HEALTH AND SAFETY BUILDING, TRA667. SOUTH AND WEST ELEVATIONS. FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

HEALTH AND SAFETY BUILDING, TRA-667. SOUTH AND WEST ELEVATIONS. FLOOR PLAN AND ROOM DESIGNATIONS. NOTE PAIR OF ENTRY DOORS IN WEST ELEVATION FOR MEN AND WOMEN. CONCRETE T-BEAMS. F.C. TORKELSON CO. 842-MTR-667-A1, 1/1963. INL INDEX NO. 531-0667-00-851-151143, REV. 4. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Spanish Language Processing at University of Maryland: Building Infrastructure for Multilingual Applications

DTIC Science & Technology

2001-09-01

translation of the Spanish original sentence. Acquiring bilingual dictionary entries In addition to building and applying the more sophisticated LCS...porting LCS lexicons to new languages, as described above, and are also useful by themselves in improving dictionary -based cross language information...hold much of the time. Moreover, lexical dependencies have proven to be instrumental in advances in monolingual syntactic analysis (e.g. I-erg MY

Representation of viruses in the remediated PDB archive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawson, Catherine L., E-mail: cathy.lawson@rutgers.edu; Dutta, Shuchismita; Westbrook, John D.

2008-08-01

A new data model for PDB entries of viruses and other biological assemblies with regular noncrystallographic symmetry is described. A new scheme has been devised to represent viruses and other biological assemblies with regular noncrystallographic symmetry in the Protein Data Bank (PDB). The scheme describes existing and anticipated PDB entries of this type using generalized descriptions of deposited and experimental coordinate frames, symmetry and frame transformations. A simplified notation has been adopted to express the symmetry generation of assemblies from deposited coordinates and matrix operations describing the required point, helical or crystallographic symmetry. Complete correct information for building full assemblies,more » subassemblies and crystal asymmetric units of all virus entries is now available in the remediated PDB archive.« less

Generic aerocapture atmospheric entry study, volume 1

NASA Technical Reports Server (NTRS)

1980-01-01

An atmospheric entry study to fine a generic aerocapture vehicle capable of missions to Mars, Saturn, and Uranus is reported. A single external geometry was developed through atmospheric entry simulations. Aerocapture is a system design concept which uses an aerodynamically controlled atmospheric entry to provide the necessary velocity depletion to capture payloads into planetary orbit. Design concepts are presented which provide the control accuracy required while giving thermal protection for the mission payload. The system design concepts consist of the following elements: (1) an extendable biconic aerodynamic configuration with lift to drag ratio between 1.0 and 2.0; (2) roll control system concepts to control aerodynamic lift and disturbance torques; (3) aeroshell design concepts capable of meeting dynamic pressure loads during aerocapture; and (4) entry thermal protection system design concepts to meet thermodynamic loads during aerocapture.

Strengthening core public health capacity based on the implementation of the International Health Regulations (IHR) (2005): Chinese lessons

PubMed Central

Liu, Bin; Sun, Yan; Dong, Qian; Zhang, Zongjiu; Zhang, Liang

2015-01-01

As an international legal instrument, the International Health Regulations (IHR) is internationally binding in 196 countries, especially in all the member states of the World Health Organization (WHO). The IHR aims to prevent, protect against, control, and respond to the international spread of disease and aims to cut out unnecessary interruptions to traffic and trade. To meet IHR requirements, countries need to improve capacity construction by developing, strengthening, and maintaining core response capacities for public health risk and Public Health Emergency of International Concern (PHEIC). In addition, all the related core capacity requirements should be met before June 15, 2012. If not, then the deadline can be extended until 2016 upon request by countries. China has promoted the implementation of the IHR comprehensively, continuingly strengthening the core public health capacity and advancing in core public health emergency capacity building, points of entry capacity building, as well as risk prevention and control of biological events (infectious diseases, zoonotic diseases, and food safety), radiological, nuclear, and chemical events, and other catastrophic events. With significant progress in core capacity building, China has dealt with many public health emergencies successfully, ensuring that its core public health capacity has met the IHR requirements, which was reported to WHO in June 2014. This article describes the steps, measures, and related experiences in the implementation of IHR in China. PMID:26029897

An Entry Flight Controls Analysis for a Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Calhoun, Philip

2000-01-01

The NASA Langley Research Center has been performing studies to address the feasibility of various single-stage to orbit concepts for use by NASA and the commercial launch industry to provide a lower cost access to space. Some work on the conceptual design of a typical lifting body concept vehicle, designated VentureStar(sup TM) has been conducted in cooperation with the Lockheed Martin Skunk Works. This paper will address the results of a preliminary flight controls assessment of this vehicle concept during the atmospheric entry phase of flight. The work includes control analysis from hypersonic flight at the atmospheric entry through supersonic speeds to final approach and landing at subsonic conditions. The requirements of the flight control effectors are determined over the full range of entry vehicle Mach number conditions. The analysis was performed for a typical maximum crossrange entry trajectory utilizing angle of attack to limit entry heating and providing for energy management, and bank angle to modulation of the lift vector to provide downrange and crossrange capability to fly the vehicle to a specified landing site. Sensitivity of the vehicle open and closed loop characteristics to CG location, control surface mixing strategy and wind gusts are included in the results. An alternative control surface mixing strategy utilizing a reverse aileron technique demonstrated a significant reduction in RCS torque and fuel required to perform bank maneuvers during entry. The results of the control analysis revealed challenges for an early vehicle configuration in the areas of hypersonic pitch trim and subsonic longitudinal controllability.

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

NASA Astrophysics Data System (ADS)

Wu, Chao; Yang, Jun; Li, Shihua; Li, Qi; Guo, Lei

2018-05-01

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8 km parachute deployment point distribution error) than the baseline control scheme (8.4 km) and integral control scheme (5.8 km).

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

15 CFR 270.320 - Entry and inspection of site where a building failure has occurred.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Collection and Preservation of Evidence... deploys a Team, the Team members will be issued notices of inspection authority to enter and inspect the...

Interior, looking northeast Beale Air Force Base, Perimeter Acquisition ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Development Of A Combined Sensor System For Atmospheric Entry Missions

NASA Astrophysics Data System (ADS)

Preci, A.; Eswein, N.; Herdrich, G.; Fasoulas, S.; Roser, H.-P.; Auweter-Kurtz, M.

2011-05-01

The payload COMPARE is developed at the Institute of Space Systems for various entry scenarios. It was previously laid out for a Mars entry mission and afterwards redesigned for the German Aerospace Centre suborbital re-entry mission SHEFEX II, which had its successful roll-out in July 2010 and is due to be launched in September 2011. The sensor system aims to simultaneously measure the temperature of the thermal protection shield, the radiation from the plasma and the pressure. The most recent development of COMPARE is a combined sensor system for ablative thermal protection systems enabling a separation of the radiative heat flux from the total heat flux. Furthermore, it enables also the detection of specific species in the plasma by measuring the radiative heat flux at a defined wavelength range. In the frame of an ESA funded project a breadboard has been build and tested in a plasma wind tunnel in order to prove the feasibility of such a sensor system for upcoming entry missions. Results of these measurements are presented in this work.

Commercial Building Energy Asset Score

DOE Office of Scientific and Technical Information (OSTI.GOV)

This software (Asset Scoring Tool) is designed to help building owners and managers to gain insight into the as-built efficiency of their buildings. It is a web tool where users can enter their building information and obtain an asset score report. The asset score report consists of modeled building energy use (by end use and by fuel type), building systems (envelope, lighting, heating, cooling, service hot water) evaluations, and recommended energy efficiency measures. The intended users are building owners and operators who have limited knowledge of building energy efficiency. The scoring tool collects minimum building data (~20 data entries) frommore » users and build a full-scale energy model using the inference functionalities from Facility Energy Decision System (FEDS). The scoring tool runs real-time building energy simulation using EnergyPlus and performs life-cycle cost analysis using FEDS. An API is also under development to allow the third-party applications to exchange data with the web service of the scoring tool.« less

2. EXTERIOR FRONT (SOUTHEAST) SIDE OF BUILDING 117 SHOWING MAIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. EXTERIOR FRONT (SOUTHEAST) SIDE OF BUILDING 117 SHOWING MAIN RESIDENTIAL STREET IN LOWER FOREGROUND, CEMENT-LAID ROCK RETAINING WALL IN FRONT OF HOUSE, AND CONCRETE STEPS AND WALKWAY TO FRONT PORCH AND DOOR. NOTE SLIDING GLASS DOOR REPLACEMENT FOR ORIGINAL DOOR WHICH HAS SUBSEQUENTLY BEEN REMODELED BACK TO A SINGLE ENTRY DOOR. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

"Don't Say Nothin' Bad about My Baby": A Re-evaluation of Women's Roles in the Brill Building Era of Early Rock 'n' Roll.

ERIC Educational Resources Information Center

Rohlfing, Mary E.

1996-01-01

Explores a period in American rock 'n' roll known as the Brill Building era. Argues that this marked the massive entry of women into rock 'n' roll, providing anglo Americans with their first taste of a female youth culture focused on sexuality and their first exposure to the voices and vernacular of young, African American women. (PA)

75 FR 25024 - 30-Day Notice of Proposed Information Collection: DS-5501, Electronic Diversity Visa Entry Form...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

...-5501, Electronic Diversity Visa Entry Form, OMB Control Number 1405-0153 ACTION: Notice of request for... Collection: Electronic Diversity Visa Entry Form. OMB Control Number: 1405-0153. Type of Request: Extension of Currently Approved Collection. Originating Office: Bureau of Consular Affairs, Office of Visa...

Effects of Control Hysteresis on the Space Shuttle Orbiter's Entry. M.S. Thesis - George Washington Univ.

NASA Technical Reports Server (NTRS)

Powell, R. W.

1975-01-01

There are six degree-of-freedom simulations of the space shuttle orbiter entry with aerodynamic control hysteresis conducted on the NASA Langley Research Center interactive simulator known as the Automatic Reentry Flight Dynamics Simulator. These were performed to determine if the presence of aerodynamic control hysteresis would endanger the mission, either by making the vehicle unable to maintain proper attitude for a safe entry, or by increasing the amount of the reaction control system's fuel consumption beyond that carried.

The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerato

NASA Image and Video Library

2013-05-31

The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerator, an inflatable spacecraft technology that allows payloads to survive the harsh conditions of atmospheric re-entry. This photo was taken at NASA Langley in Building 1250 when sensors were being applied.

The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerato

NASA Image and Video Library

2013-04-25

The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerator, an inflatable spacecraft technology that allows payloads to survive the harsh conditions of atmospheric re-entry. This photo was taken at NASA Langley in Building 1250 when sensors were being applied.

19. The first floor. A photo image of the public ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. The first floor. A photo image of the public entry, elevator foyer and the rear of the central display windows. - John T. Beasley Building, 632 Cherry Street (between Sixth & Seventh Streets), Terre Haute, Vigo County, IN

Toward a Work-Force Analysis of the School Library Media Professional.

ERIC Educational Resources Information Center

Heim, Kathleen M.

1981-01-01

Summarizes general demographic and salary data to focus on entry levels, the current employment universe of school librarians, and the salary data for building-level librarians in 1979-80. More than 27 references are listed. (RAA)

76 FR 3600 - Codex Alimentarius Commission: Meeting of the Codex Committee on Food Additives

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... because it will expedite entry into the building and its parking area. If you require parking, please... provides automatic and customized access to selected food safety news and information. This service is...

Exploration Flight Test 1 Afterbody Aerothermal Environment Reconstruction

NASA Technical Reports Server (NTRS)

Hyatt, Andrew J.; Oliver, Brandon; Amar, Adam; Lessard, Victor

2016-01-01

The Exploration Flight Test 1 vehicle included roughly 100 near surface thermocouples on the after body of the vehicle. The temperature traces at each of these instruments have been used to perform inverse environment reconstruction to determine the aerothermal environment experienced during re-entry of the vehicle. This paper provides an overview of the reconstructed environments and identifies critical aspects of the environment. These critical aspects include transition and reaction control system jet influence. A blind test of the process and reconstruction tool was also performed to build confidence in the reconstructed environments. Finally, an uncertainty quantification analysis was also performed to identify the impact of each of the uncertainties on the reconstructed environments.

Computerized physician order entry from a chief information officer perspective.

PubMed

Cotter, Carole M

2004-12-01

Designing and implementing a computerized physician order entry system in the critical care units of a large urban hospital system is an enormous undertaking. With their significant potential to improve health care and significantly reduce errors, the time for computerized physician order entry or physician order management systems is past due. Careful integrated planning is the key to success, requiring multidisciplinary teams at all levels of clinical and administrative management to work together. Articulated from the viewpoint of the Chief Information Officer of Lifespan, a not-for-profit hospital system in Rhode Island, the vision and strategy preceding the information technology plan, understanding the system's current state, the gap analysis between current and future state, and finally, building and implementing the information technology plan are described.

The Zds proteins control entry into mitosis and target protein phosphatase 2A to the Cdc25 phosphatase

PubMed Central

Wicky, Sidonie; Tjandra, Hendri; Schieltz, David; Yates, John; Kellogg, Douglas R.

2011-01-01

The Wee1 kinase restrains entry into mitosis by phosphorylating and inhibiting cyclin-dependent kinase 1 (Cdk1). The Cdc25 phosphatase promotes entry into mitosis by removing Cdk1 inhibitory phosphorylation. Experiments in diverse systems have established that Wee1 and Cdc25 are regulated by protein phosphatase 2A (PP2A), but a full understanding of the function and regulation of PP2A in entry into mitosis has remained elusive. In budding yeast, entry into mitosis is controlled by a specific form of PP2A that is associated with the Cdc55 regulatory subunit (PP2ACdc55). We show here that related proteins called Zds1 and Zds2 form a tight stoichiometric complex with PP2ACdc55 and target its activity to Cdc25 but not to Wee1. Conditional inactivation of the Zds proteins revealed that their function is required primarily at entry into mitosis. In addition, Zds1 undergoes cell cycle–dependent changes in phosphorylation. Together, these observations define a role for the Zds proteins in controlling specific functions of PP2ACdc55 and suggest that upstream signals that regulate PP2ACdc55 may play an important role in controlling entry into mitosis. PMID:21119008

The Zds proteins control entry into mitosis and target protein phosphatase 2A to the Cdc25 phosphatase.

PubMed

Wicky, Sidonie; Tjandra, Hendri; Schieltz, David; Yates, John; Kellogg, Douglas R

2011-01-01

The Wee1 kinase restrains entry into mitosis by phosphorylating and inhibiting cyclin-dependent kinase 1 (Cdk1). The Cdc25 phosphatase promotes entry into mitosis by removing Cdk1 inhibitory phosphorylation. Experiments in diverse systems have established that Wee1 and Cdc25 are regulated by protein phosphatase 2A (PP2A), but a full understanding of the function and regulation of PP2A in entry into mitosis has remained elusive. In budding yeast, entry into mitosis is controlled by a specific form of PP2A that is associated with the Cdc55 regulatory subunit (PP2A(Cdc55)). We show here that related proteins called Zds1 and Zds2 form a tight stoichiometric complex with PP2A(Cdc55) and target its activity to Cdc25 but not to Wee1. Conditional inactivation of the Zds proteins revealed that their function is required primarily at entry into mitosis. In addition, Zds1 undergoes cell cycle-dependent changes in phosphorylation. Together, these observations define a role for the Zds proteins in controlling specific functions of PP2A(Cdc55) and suggest that upstream signals that regulate PP2A(Cdc55) may play an important role in controlling entry into mitosis.

75 FR 4901 - 60-Day Notice of Proposed Information Collection: DS-5501, Electronic Diversity Visa Entry Form...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

...-5501, Electronic Diversity Visa Entry Form, OMB Control Number 1405-0153 ACTION: Notice of request for... Visa Entry Form. OMB Control Number: 1405-0153. Type of Request: Extension of currently approved collection. Originating Office: Bureau of Consular Affairs, Office of Visa Services (CA/VO). Form Number: DS...

Obstetrics and gynaecology as a career choice: a cohort study of canadian medical students.

PubMed

Scott, Ian M; Nasmith, Trudy; Gowans, Margot C; Wright, Bruce J; Brenneis, Fraser R

2010-11-01

to describe the characteristics of medical students interested in obstetrics and gynaecology and to build a model that predicts which of these students will choose obstetrics and gynaecology as their career. students were surveyed in 2002, 2003, and 2004 at the commencement of their medical studies. Data were collected on career choice, attitudes to practice, and demographics at medical school entry and on career choice at medical school exit. three items present at entry to medical school were predictive of students ultimately choosing a career in obstetrics and gynaecology: having this career as one of their first three career choices at entry (having it as their first choice was the strongest predictor), being female, and desiring a narrow scope of practice. students choosing a career in obstetrics and gynaecology have attributes at medical school entry that differentiate them from students interested in other specialties. Identifying these attributes may guide education in and recruitment to obstetrics and gynaecology.

Trajectory Design and Control for the Compton Gamma Ray Observatory Re-Entry

NASA Technical Reports Server (NTRS)

Hoge, Susan; Vaughn, Frank; Bauer, Frank H. (Technical Monitor)

2000-01-01

The Compton Gamma Ray Observatory (CGRO) controlled re-entry operation was successfully conducted in June of 2000. The surviving parts of the spacecraft landed in the Pacific Ocean within the predicted footprint. The design of the maneuvers to control the trajectory to accomplish this re-entry presented several challenges. These challenges included timing and duration of the maneuvers, fuel management, post maneuver position knowledge, collision avoidance with other spacecraft, accounting for the break-up of the spacecraft into several pieces with a wide range of ballistic coefficients, and ensuring that the impact footprint would remain within the desired landing area in the event of contingencies. This paper presents the initial re-entry trajectory design and the evolution of the design into the maneuver sequence used for the re-entry. The paper discusses the constraints on the trajectory design, the modifications made to the initial design and the reasons behind these modifications. Data from the re-entry operation are presented.

76 FR 44892 - Information Collection; Locatable Minerals

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... DEPARTMENT OF AGRICULTURE Forest Service Information Collection; Locatable Minerals AGENCY: Forest... on the extension of a currently approved information collection, Locatable Minerals-36 CFR part 228... 703-605-4794 to facilitate entry to the building. FOR FURTHER INFORMATION CONTACT: Tony Ferguson...

ARC-2006-ACD06-0213-013

NASA Image and Video Library

2006-09-25

Ames and Moffett Field (MFA) historical sites and memorials Entry of building N-210 Ames Flight System Research Laboratory architectural detail. Eastside showing NACA brass inset wing over front doors, light fixtures flanking the doors and glass brick window wall above the doors

ARC-2006-ACD06-0213-014

NASA Image and Video Library

2006-09-25

Ames and Moffett Field (MFA) historical sites and memorials Entry of building N-210 Ames Flight System Research Laboratory architectural detail. Eastside showing NACA brass inset wing over front doors, light fixtures flanking the doors and glass brick window wall above the doors

RAETRAD MODEL OF RADON GAS GENERATION, TRANSPORT, AND INDOOR ENTRY

EPA Science Inventory

The report describes the theoretical basis, implementation, and validation of the Radon Emanation and Transport into Dwellings (RAETRAD) model, a conceptual and mathematical approach for simulating radon (222Rn) gas generation and transport from soils and building foundations to ...

Evaluation of Mars Entry Reconstructured Trajectories Based on Hypothetical 'Quick-Look' Entry Navigation Data

NASA Technical Reports Server (NTRS)

Pastor, P. Rick; Bishop, Robert H.; Striepe, Scott A.

2000-01-01

A first order simulation analysis of the navigation accuracy expected from various Navigation Quick-Look data sets is performed. Here quick-look navigation data are observations obtained by hypothetical telemetried data transmitted on the fly during a Mars probe's atmospheric entry. In this simulation study, navigation data consists of 3-axis accelerometer sensor and attitude information data. Three entry vehicle guidance types are studied: I. a Maneuvering entry vehicle (as with Mars 01 guidance where angle of attack and bank angle are controlled); II. Zero angle-of-attack controlled entry vehicle (as with Mars 98); and III. Ballistic, or spin stabilized entry vehicle (as with Mars Pathfinder);. For each type, sensitivity to progressively under sampled navigation data and inclusion of sensor errors are characterized. Attempts to mitigate the reconstructed trajectory errors, including smoothing, interpolation and changing integrator characteristics are also studied.

Exploring endoperoxides as a new entry for the synthesis of branched azasugars

PubMed Central

Domeyer, Svenja; Bjerregaard, Mark; Johansson, Henrik

2017-01-01

A new class of nitrogen-containing endoperoxides were synthesised by a photochemical [4 + 2]-cycloaddition between a diene and singlet oxygen. The endoperoxides were dihydroxylated and protected to provide a series of endoperoxide building blocks for organic synthesis, with potential use as precursors for the synthesis of branched azasugars. Preliminary exploration of the chemistry of these building blocks provided access to a variety of derivatives including tetrahydrofurans, epoxides and protected amino-tetraols. PMID:28487758

Genesis Sample Return Capsule Overview

NASA Technical Reports Server (NTRS)

Willcockson, Bill

2005-01-01

I. Simple Entry Capsule Concept: a) Spin-Stabilized/No Active Control Systems; b) Ballistic Entry for 11.04 km/sec Velocity; c) No Heatshield Separation During Entry; d) Parachute Deploy via g-Switch + Timer. II. Stardust Design Inheritance a) Forebody Shape; b) Seal Concepts; c) Parachute Deploy Control; d) Utah Landing Site (UTTR). III. TPS Systems a) Heatshield - Carbon-Carbon - First Planetary Entry; b) Backshell - SLA-561V - Flight Heritage from Pathfinder, MER; d) Forebody Structural Penetrations Aerothermal and TPS Design Process has the Same Methodology as Used for Pathfinder, MER Flight Vehicles.

Computer Maintenance Operations Center (CMOC), additional computer support equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Computer Maintenance Operations Center (CMOC), additional computer support equipment - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Effectiveness of biosecurity measures in preventing badger visits to farm buildings.

PubMed

Judge, Johanna; McDonald, Robbie A; Walker, Neil; Delahay, Richard J

2011-01-01

Bovine tuberculosis caused by Mycobacterium bovis is a serious and economically important disease of cattle. Badgers have been implicated in the transmission and maintenance of the disease in the UK since the 1970s. Recent studies have provided substantial evidence of widespread and frequent visits by badgers to farm buildings during which there is the potential for close direct contact with cattle and contamination of cattle feed. Here we evaluated the effectiveness of simple exclusion measures in improving farm biosecurity and preventing badger visits to farm buildings. In the first phase of the study, 32 farms were surveyed using motion-triggered infrared cameras on potential entrances to farm buildings to determine the background level of badger visits experienced by each farm. In the second phase, they were divided into four treatment groups; "Control", "Feed Storage", "Cattle Housing" and "Both", whereby no exclusion measures were installed, exclusion measures were installed on feed storage areas only, cattle housing only or both feed storage and cattle housing, respectively. Badger exclusion measures included sheet metal gates, adjustable metal panels for gates, sheet metal fencing, feed bins and electric fencing. Cameras were deployed for at least 365 nights in each phase on each farm. Badger visits to farm buildings occurred on 19 of the 32 farms in phase one. In phase two, the simple exclusion measures were 100% effective in preventing badger entry into farm buildings, as long as they were appropriately deployed. Furthermore, the installation of exclusion measures also reduced the level of badger visits to the rest of the farmyard. The findings of the present study clearly demonstrate how relatively simple practical measures can substantially reduce the likelihood of badger visits to buildings and reduce some of the potential for contact and disease transmission between badgers and cattle.

Preliminary Study Using Forward Reaction Control System Jets During Space Shuttle Entry

NASA Technical Reports Server (NTRS)

Restrepo, Carolina; Valasek, John

2006-01-01

Failure or degradation of the flight control system, or hull damage, can lead to loss of vehicle control during entry. Possible failure scenarios are debris impact and wing damage that could result in a large aerodynamic asymmetry which cannot be trimmed out without additional yaw control. Currently the space shuttle uses aerodynamic control surfaces and Reaction Control System jets to control attitude. The forward jets are used for orbital maneuvering only, while the aft jets are used for yaw control during entry. This paper develops a controller for using the forward reaction control system jets as an additional control during entry, and assesses its value and feasibility during failure situations. Forward-aft jet blending logic is created, and implemented on a simplified model of the space shuttle entry flight control system. The model is validated and verified on the nonlinear, six degree-of-freedom Shuttle Engineering Simulator. A rudimentary human factors study was undertaken using the forward cockpit simulator at Johnson Space Center, to assess flying qualities of the new system and pilot workload. Results presented in the paper show that the combination of forward and aft jets provides useful additional yaw control, in addition to potential fuel savings and the ability to balance the use of the fuel in the forward and aft tanks to meet availability constraints of both forward and aft fuel tanks. Piloted simulation studies indicated that using both sets of jets while flying a damaged space shuttle reduces pilot workload, and makes the vehicle more responsive.

KSC-2012-1066

NASA Image and Video Library

2012-01-18

CAPE CANAVERAL, Fla. -- The stylized shape of the new home for Atlantis at the Kennedy Space Center Visitor Complex incorporates hues of orange and gold to represent both the heat and the bright colors of re-entry. Special gray-colored tiling has been incorporated into the building's design to represent the space shuttle tiles that protected the orbiter from the heat of re-entry. A groundbreaking ceremony for the future home of Atlantis was held Jan. 18. For more information on this and other exhibits at the visitor complex, go to http://www.kennedyspacecenter.com. Artist rendering courtesy of PGAV Destinations for Delaware North Parks & Resorts

Representation of viruses in the remediated PDB archive

PubMed Central

Lawson, Catherine L.; Dutta, Shuchismita; Westbrook, John D.; Henrick, Kim; Berman, Helen M.

2008-01-01

A new scheme has been devised to represent viruses and other biological assemblies with regular noncrystallographic symmetry in the Protein Data Bank (PDB). The scheme describes existing and anticipated PDB entries of this type using generalized descriptions of deposited and experimental coordinate frames, symmetry and frame transformations. A simplified notation has been adopted to express the symmetry generation of assemblies from deposited coordinates and matrix operations describing the required point, helical or crystallographic symmetry. Complete correct information for building full assemblies, subassemblies and crystal asymmetric units of all virus entries is now available in the remediated PDB archive. PMID:18645236

STS-97 flight control team in WFCR - JSC - MCC

NASA Image and Video Library

2000-11-24

JSC2000-07303 (24 November 2000) --- The 30-odd flight controllers supporting the STS-97 entry shift pose for a pre-flight group portrait in the shuttle flight control room in Houston's Mission Control Center (JSC). Entry flight director LeRoy Cain (front center) holds a mission logo.

Strengthening core public health capacity based on the implementation of the International Health Regulations (IHR) (2005): Chinese lessons.

PubMed

Liu, Bin; Sun, Yan; Dong, Qian; Zhang, Zongjiu; Zhang, Liang

2015-04-17

As an international legal instrument, the International Health Regulations (IHR) is internationally binding in 196 countries, especially in all the member states of the World Health Organization (WHO). The IHR aims to prevent, protect against, control, and respond to the international spread of disease and aims to cut out unnecessary interruptions to traffic and trade. To meet IHR requirements, countries need to improve capacity construction by developing, strengthening, and maintaining core response capacities for public health risk and Public Health Emergency of International Concern (PHEIC). In addition, all the related core capacity requirements should be met before June 15, 2012. If not, then the deadline can be extended until 2016 upon request by countries. China has promoted the implementation of the IHR comprehensively, continuingly strengthening the core public health capacity and advancing in core public health emergency capacity building, points of entry capacity building, as well as risk prevention and control of biological events (infectious diseases, zoonotic diseases, and food safety), radiological, nuclear, and chemical events, and other catastrophic events. With significant progress in core capacity building, China has dealt with many public health emergencies successfully, ensuring that its core public health capacity has met the IHR requirements, which was reported to WHO in June 2014. This article describes the steps, measures, and related experiences in the implementation of IHR in China. © 2015 by Kerman University of Medical Sciences.

Streamlining Building Efficiency Evaluation with DOE's Asset Score Preview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Wang, Nora; Gonzalez, Juan

2016-08-26

Building Energy Asset Score (Asset Score), developed by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE), is a tool to help building owners and managers assess the efficiency of a building's energy-related systems and encourage investment in cost-effective improvements. The Asset Score uses an EnergyPlus model to provide a quick assessment of building energy performance with minimum user inputs of building characteristics and identifies upgrade opportunities. Even with a reduced set of user inputs, data collection remains a challenge for wide-spread adoption, especially when evaluating a large number of buildings. To address this, Asset Scoremore » Preview was developed to allow users to enter as few as seven building characteristics to quickly assess their buildings before a more in-depth analysis. A streamlined assessment from Preview to full Asset Score provides an easy entry point and also enables users who manage a large number of buildings to screen and prioritize buildings that can benefit most from a more detailed evaluation and possible energy efficiency upgrades without intensive data collection.« less

Combined Structural and Trajectory Control of Variable-Geometry Planetary Entry Systems

NASA Technical Reports Server (NTRS)

Quadrelli, Marco B.; Pellegrino, Sergio; Kwok, Kawai

2011-01-01

Some of the key challenges of planetary entry are to dissipate the large kinetic energy of the entry vehicle and to land with precision. Past missions to Mars were based on unguided entry, where entry vehicles carried payloads of less than 0.6 T and landed within 100 km of the designated target. The Mars Science Laboratory (MSL) is expected to carry a mass of almost 1 T to within 20 km of the target site. Guided lifting entry is needed to meet these higher deceleration and targeting demands. If the aerodynamic characteristics of the decelerator are variable during flight, more trajectory options are possible, and can be tailored to specific mission requirements. In addition to the entry trajectory modulation, having variable aerodynamic properties will also favor maneuvering of the vehicle prior to descent. For proper supersonic parachute deployment, the vehicle needs to turn to a lower angle of attack. One approach to entry trajectory improvement and angle of attack control is to embed a variable geometry decelerator in the design of the vehicle. Variation in geometry enables the vehicle to adjust its aerodynamic performance continuously without additional fuel cost because only electric power is needed for actuating the mechanisms that control the shape change. Novel structural and control concepts have been developed that enable the decelerator to undergo variation in geometry. Changing the aerodynamic characteristics of a flight vehicle by active means can potentially provide a mechanically simple, affordable, and enabling solution for entry, descent, and landing across a wide range of mission types, sample capture and return, and reentry to Earth, Titan, Venus, or Mars. Unguided ballistic entry is not sufficient to meet this more stringent deceleration, heating, and targeting demands. Two structural concepts for implementing the cone angle variation, a segmented shell, and a corrugated shell, have been presented.

MSL EDL Entry Guidance using the Entry Terminal Point Controller

NASA Technical Reports Server (NTRS)

2006-01-01

The Mars Science Laboratory will be the first Mars mission to attempt a guided entry with the objective of safely delivering the entry vehicle to a survivable parachute deploy state within 10 km of the pre-designated landing site. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control range based on deviations in range, altitude rate, and drag acceleration from a reference trajectory. For application to Mars landers which must make use of the tenuous Martian atmosphere, it is critical to balance the lift of the vehicle to minimize the range while still ensuring a safe deploy altitude. An overview of the process to generate optimized guidance settings is presented, discussing improvements made over the last four years. Performance tradeoffs between ellipse size and deploy altitude will be presented, along with imposed constraints of entry acceleration and heating. Performance sensitivities to the bank reversal deadbands, heading alignment, attitude initialization error, and atmospheric delivery errors are presented. Guidance settings for contingency operations, such as those appropriate for severe dust storm scenarios, are evaluated.

75 FR 38770 - Siskiyou, OR Resource Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-06

.... Written comments should be sent to Paul Galloway, Medford Interagency Office, 3040 Biddle Road, Medford... facilitate entry into the building. FOR FURTHER INFORMATION CONTACT: Paul Galloway, Acting Public Affairs... the opportunity to address the Committee during that session. Dated: June 24, 2010. Scott D. Conroy...

Florida Educational Facilities, 1996.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

This document contains information, photographs, and floor plans of many of Florida's new elementary through high school facilities occupied in 1996. Each entry lists the facility's type, building size, student capacity, and general structural information. Also provided is information on the facility's total construction cost; the architects and…

Florida Educational Facilities, 1997.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

This document contains information, photographs, and floor plans of many of Florida's new elementary through high school facilities occupied in 1997. Each entry lists the facility's type, building size, student capacity, and general structural information. Also provided is information on the facility's total construction cost; the architects and…

Florida Educational Facilities, 1998.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

This document contains information, photographs, and floor plans of many of Florida's new elementary through high school facilities occupied in 1998. Each entry lists the facility's type, building size, student capacity, and general structural information. Also provided is information on the facility's total construction cost; the architects and…

View of Face A and Face B Arrays, looking northeast ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of Face A and Face B Arrays, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170174 computers ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170-174 computers - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

STS-99 crewmembers bailout training in building 9

NASA Image and Video Library

1999-05-19

S99-05617 (19 May 1999) --- Astronaut Janet L. Kavandi, mission specialist, listens to a briefing about emergency egress procedures during a training session at the Johnson Space Center's Systems Integration Facility. Kavandi wears a training version of the partial pressure launch and entry garment.

Public Health Interventions and SARS Spread, 2003

PubMed Central

2004-01-01

The 2003 outbreak of severe acute respiratory syndrome (SARS) was contained largely through traditional public health interventions, such as finding and isolating case-patients, quarantining close contacts, and enhanced infection control. The independent effectiveness of measures to "increase social distance" and wearing masks in public places requires further evaluation. Limited data exist on the effectiveness of providing health information to travelers. Entry screening of travelers through health declarations or thermal scanning at international borders had little documented effect on detecting SARS cases; exit screening appeared slightly more effective. The value of border screening in deterring travel by ill persons and in building public confidence remains unquantified. Interventions to control global epidemics should be based on expert advice from the World Health Organization and national authorities. In the case of SARS, interventions at a country's borders should not detract from efforts to identify and isolate infected persons within the country, monitor or quarantine their contacts, and strengthen infection control in healthcare settings. PMID:15550198

The Big Group of People Looking at How to Control Putting the Parts of the Air That Are the Same as What You Breathe Out Into Small Spaces in Rocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stack, Andrew

Representing the Nanoscale Control of Geologic CO2 (NCGC), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE energy. The mission of NCGC is to build a fundamental understanding of molecular-to-pore-scale processes in fluid-rock systems,more » and to demonstrate the ability to control critical aspects of flow, transport, and mineralization in porous rock media as applied to the injection and storage of carbon dioxide (CO2) in subsurface reservoirs.« less

Heat stress control in the TMI-2 (Three Mile Island Unit 2) defueling and decontamination activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schork, J.S.; Parfitt, B.A.

During the initial stages of the Three Mile Island Unit 2 (TMI-2) defueling and decontamination activities for the reactor building, it was realized that the high levels of loose radioactive contamination would require the use of extensive protective clothing by entry personnel. While there was no doubt that layered protective clothing protects workers from becoming contaminated, it was recognized that these same layers of clothing would impose a very significant heat stress burden. To prevent the potentially serious consequences of a severe reaction to heat stress by workers in the hostile environment of the TMI-2 reactor building and yet maintainmore » the reasonable work productivity necessary to perform the recovery adequately, an effective program of controlling worker exposure to heat stress had to be developed. Body-cooling devices produce a flow of cool air, which is introduced close to the skin to remove body heat through convection and increased sweat evaporation. The cooling effect produced by the Vortex tube successfully protected the workers from heat stress, however, there were several logistical and operational problems that hindered extensive use of these devices. The last type of cooling garment examined was the frozen water garment (FWG) developed by Elizier Kamon at the Pennsylvania State University as part of an Electric Power Research Institute research grant. Personal protection, i.e., body cooling, engineering controls, and administrative controls, have been implemented successfully.« less

77 FR 59700 - 30-Day Notice of Proposed Information Collection: Request for Entry Into Children's Passport...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... for Entry Into Children's Passport Issuance Alert Program ACTION: Notice of request for public comment...: Request for Entry into Children's Passport Issuance Alert Program. OMB Control Number: 1405-0169. Type of... support entry of the name of a minor (an unmarried person under 18) into the Children's Passport Issuance...

Study on goaf gas control technology of gob-side entry driving

NASA Astrophysics Data System (ADS)

Ren, Qihan; Yuan, Benqing; Li, Qiansi

2018-01-01

The 1112 (1) track gate roadway of Gu Qiao coal mine of Huainan mining group adopt the method of gob-side entry driving, the gas emission is large during the driving of the roadway, the gas in the goaf seriously influences the safe driving of the roadway. Equalizing method, drilling drainage method, jet grouting method and other goaf gas controlling measures has been adopted. Finally, it effectively solves the safety threat of gas in goaf to roadway driving, it provides a good reference for the gas control of the gob-side entry.

The Lexical Breadth of Undergraduate Novice Level Writing Competency

ERIC Educational Resources Information Center

Douglas, Scott Roy

2013-01-01

This study builds on previous work exploring reading and listening lexical thresholds (Nation, 2006; Laufer & Ravenhorst-Kalovski, 2010; Schmitt, Jiang, & Grabe, 2011) in order to investigate productive vocabulary targets that mark successful entry-level undergraduate writing. Papers that passed the Effective Writing Test (EWT) were chosen…

76 FR 31299 - Northern New Mexico Resource Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... DEPARTMENT OF AGRICULTURE Forest Service Northern New Mexico Resource Advisory Committee AGENCY... Mexico Resource Advisory Committee (NNM RAC) will meet in Albuquerque, New Mexico. The committee is... Road Taos, New Mexico. Please call ahead to 575- 758-6344 to facilitate entry into the building to view...

Detail of array panels, Face B, with active and terminated ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of array panels, Face B, with active and terminated dipole elements - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

76 FR 58460 - Information Collection; Qualified Products List for Long-Term Retardant for Wildland Firefighting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... organizations on the extension (with contact revision) of a currently approved information collection, Qualified... entry to the building. FOR FURTHER INFORMATION CONTACT: Cecilia Johnson, Missoula Technology and... contact revision. Abstract: The Forest Service and cooperating wildland firefighting agencies need...

STS-118 Ascent/Entry Flight Control Team in White Flight Control Room (WFCR) with Flight Director Steve Stitch

NASA Image and Video Library

2007-07-20

JSC2007-E-41011 (20 July 2007) --- STS-118 Ascent/Entry flight control team pose for a group portrait in the space shuttle flight control room of Houston's Mission Control Center (MCC). Flight director Steve Stich (center right) and astronaut Tony Antonelli, spacecraft communicator (CAPCOM), hold the STS-118 mission logo.

41 CFR 101-30.304 - Application of item entry control.

Code of Federal Regulations, 2011 CFR

2011-07-01

... control. 101-30.304 Section 101-30.304 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.3-Cataloging Items of Supply § 101-30.304 Application of item entry control. In addition...

41 CFR 101-30.304 - Application of item entry control.

Code of Federal Regulations, 2014 CFR

2014-07-01

... control. 101-30.304 Section 101-30.304 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.3-Cataloging Items of Supply § 101-30.304 Application of item entry control. In addition...

41 CFR 101-30.304 - Application of item entry control.

Code of Federal Regulations, 2013 CFR

2013-07-01

... control. 101-30.304 Section 101-30.304 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.3-Cataloging Items of Supply § 101-30.304 Application of item entry control. In addition...

41 CFR 101-30.304 - Application of item entry control.

Code of Federal Regulations, 2010 CFR

2010-07-01

... control. 101-30.304 Section 101-30.304 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.3-Cataloging Items of Supply § 101-30.304 Application of item entry control. In addition...

Radon exposures in a Jerusalem public school.

PubMed Central

Richter, E D; Neeman, E; Fischer, I; Berdugo, M; Westin, J B; Kleinstern, J; Margaliot, M

1997-01-01

In December 1995, ambient radon levels exceeding 10,000 Bq/m3 were measured in a basement shelter workroom of a multilevel East Talpiot, Jerusalem, public elementary school (six grades, 600 students). The measurements were taken after cancers (breast and multiple myeloma) were diagnosed in two workers who spent their workdays in basement rooms. The school was located on a hill that geologic maps show to be rich in phosphate deposits, which are a recognized source for radon gas and its daughter products. Levels exceeding 1000,000 Bq/m3 were measured at the mouth of a pipe in the basement shelter workroom, the major point of radon entry. The school was closed and charcoal and electret ion chamber detectors were used to carry out repeated 5-day measurements in all rooms in the multilevel building over a period of several months. Radon concentrations were generally higher in rooms in the four levels of the building that were below ground level. There were some ground-level rooms in the building in which levels reached up to 1300 Bq/m3. In rooms above ground level, however, peak levels did not exceed 300 Bq/m3. Exposure control based on sealing and positive pressure ventilation was inadequate. These findings suggested that radon diffused from highly contaminated basement and ground-floor rooms to other areas of the building and that sealing off the source may have led to reaccumulation of radon beneath the building. Later, subslab venting of below-ground radon pockets to the outside air was followed by more sustained reductions in indoor radon levels to levels below 75 Bq/m3. Even so, radon accumulated in certain rooms when the building was closed. This sentinel episode called attention to the need for a national radon policy requiring threshold exposure levels for response and control. A uniform nationwide standard for school buildings below 75 Bq/m3 level was suggested after considering prudent avoidance, the controversies over risk assessment of prolonged low-level exposures in children, and the fact that exposures in most locations in the Talpiot school could be reduced below this level. Proposal of this stringent standard stimulated the search for a strategy of risk control and management based on control at the source. This strategy was more effective and probably more cost effective than one based on suppression of exposure based on sealing and ventilation. Because many Israeli areas and much of the West Bank area of the Palestinian National Authority sit on the same phosphate deposits, regional joint projects for surveillance and control may be indicated. Images Figure 1. Figure 2. PMID:9467053

Impact of ventilation systems and energy savings in a building on the mechanisms governing the indoor radon activity concentration.

PubMed

Collignan, Bernard; Powaga, Emilie

2017-11-23

For a given radon potential in the ground and a given building, the parameters affecting the indoor radon activity concentration (IRnAC) are indoor depressurization of a building and its air change rate. These parameters depend mainly on the building characteristics, such as airtightness, and on the nature and performances of the ventilation system. This study involves a numerical sensitivity assessment of the indoor environmental conditions on the IRnAC in buildings. A numerical ventilation model has been adapted to take into account the effects of variations in the indoor environmental conditions (depressurization and air change rate) on the radon entry rate and on the IRnAC. In the context of the development of a policy to reduce energy consumption in a building, the results obtained showed that IRnAC could be strongly affected by variations in the air permeability of the building associated with the ventilation regime. Copyright © 2017 Elsevier Ltd. All rights reserved.

Woven Thermal Protection System Based Heat-shield for Extreme Entry Environments Technology (HEEET)

NASA Technical Reports Server (NTRS)

Ellerby, Donald; Venkatapathy, Ethiraj; Stackpoole, Margaret; Chinnapongse, Ronald; Munk, Michelle; Dillman, Robert; Feldman, Jay; Prabhu, Dinesh; Beerman, Adam

2013-01-01

NASA's future robotic missions utilizing an entry system into Venus and the outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or Avcoat. Therefore mission planners typically assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic is a robust TPS material however its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-term sustainability of CP will continue to pose challenges. In 2012 the Game Changing Development Program (GCDP) in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This project was highly successful demonstrating that a Woven TPS solution compares favorably to CP in performance in simulated reentry environments and provides the opportunity to manufacture graded materials that should result in overall reduced mass solutions and enable a much broader set of missions than does CP. Building off the success of the WTPS project GCDP has funded a follow on project to further mature and scale up the WTPS concept for insertion into future NASA robotic missions. The matured WTPS will address the CP concerns associated with ground based test limitations and sustainability. This presentation will briefly discuss results from the WTPS Project and the plans for WTPS maturation into a heat-shield for extreme entry environment.

Woven Thermal Protection System Based Heat-shield for Extreme Entry Environments Technology (HEEET)

NASA Technical Reports Server (NTRS)

Chinnapongse, Ronald; Ellerbe, Donald; Stackpoole, Maragaret; Venkatapathy, Ethiraj; Beerman, Adam; Feldman, Jay; Peterson Keith; Prabhu, Dinesh; Dillman, Robert; Munk, Michelle

2013-01-01

NASA's future robotic missions utilizing an entry system into Venus and the outer planets, namely, Saturn, Uranus, Neptune, result in extremely severe entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or Avcoat. Therefore mission planners typically assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic (CP) is a robust TPS material however its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-­-term sustainability of CP will continue to pose challenges. In 2012 the Game Changing Development Program (GCDP) in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This project was highly successful demonstrating that a Woven TPS solution compares favorably to CP in performance in simulated reentry environments and provides the opportunity to manufacture graded materials that should result in overall reduced mass solutions and enable a much broader set of missions than does CP. Building off the success of the WTPS project GCDP has funded a follow on project to further mature and scale up the WTPS concept for insertion into future NASA robotic missions. The matured WTPS will address the CP concerns associated with ground based test limitations and sustainability. This presentation will briefly discuss results from the WTPS Project and the plans for WTPS maturation into a heat-­-shield for extreme entry environment.

A compendium of cyclic sugar amino acids and their carbocyclic and heterocyclic nitrogen analogues.

PubMed

Risseeuw, Martijn; Overhand, Mark; Fleet, George W J; Simone, Michela I

2013-10-01

This compendium focuses on functionalised sugar amino acids (SAAs) and their 3- to 6-membered nitrogen heterocyclic and carbocyclic analogues. The main benefit of using SAAs and their related nitrogen and carbon congeners in the production of peptidomimetics and glycomimetics is that their properties can be readily altered via modification of their ring size, chemical manipulation of their numerous functional groups and fine-tuning of the stereochemical arrangement of their ring substituents. These building blocks provide access to hydrophilic and hydrophobic peptide isosteres whose physical properties allow entry to a region of chemotherapeutic space which is still under-explored by medicinal chemists. These building blocks are also important in providing amino acids whose inherent conformational bias leads to predisposition to secondary structure upon oligomerisation in relatively short sequences. These foldamers, particularly those containing ω-amino acids, provide an additional opportunity to expand access to the control of structures by artificial peptides. The synthesis and biological evaluation of these building blocks in glycomimetics and peptidomimetics systems keep expanding the reach of the glycosciences to the medical sciences, provide a greater outlook onto the wide range of cellular functions of saccharides and their derivatives involved and greater insight into the nature of oligosaccharide and protein folding.

Trajectory Design and Control for the Compton Gamma Ray Observatory Re-Entry

NASA Technical Reports Server (NTRS)

Hoge, Susan; Vaughn, Frank J., Jr.

2001-01-01

The Compton Gamma Ray Observatory (CGRO) controlled re-entry operation was successfully conducted in June of 2000. The surviving parts of the spacecraft landed in the Pacific Ocean within the nominal impact target zone. The design of the maneuvers to control the trajectory to accomplish this re-entry presented several challenges. These challenges included the timing and duration of the maneuvers, propellant management, post-maneuver state determination, collision avoidance with other spacecraft, accounting for the break-up of the spacecraft into several pieces with a wide range of ballistic coefficients, and ensuring that the impact footprint would remain within the desired impact target zone in the event of contingencies. This paper presents the initial re-entry trajectory design and traces the evolution of that design into the maneuver sequence used for the re-entry. The paper also discusses the spacecraft systems and operational constraints imposed on the trajectory design and the required modifications to the initial design based on those constraints. Data from the reentry operation are also presented.

Post-Flight EDL Entry Guidance Performance of the 2011 Mars Science Laboratory Mission

NASA Technical Reports Server (NTRS)

Mendeck, Gavin F.; McGrew, Lynn Craig

2013-01-01

The 2011 Mars Science Laboratory was the first Mars guided entry which safely delivered the rover to a landing within a touchdown ellipse of 19.1 km x 6.9 km. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control the range flown. The guided entry performed as designed without any significant exceptions. The Curiosity rover was delivered about 2.2 km from the expected touchdown. This miss distance is attributed to little time to correct the downrange drift from the final bank reversal and a suspected tailwind during heading alignment. The successful guided entry for the Mars Science Laboratory lays the foundation for future Mars missions to improve upon.

Management and Marketing. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in management and marketing occupations, use technology in these fields effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale…

Developing a Large Lexical Database for Information Retrieval, Parsing, and Text Generation Systems.

ERIC Educational Resources Information Center

Conlon, Sumali Pin-Ngern; And Others

1993-01-01

Important characteristics of lexical databases and their applications in information retrieval and natural language processing are explained. An ongoing project using various machine-readable sources to build a lexical database is described, and detailed designs of individual entries with examples are included. (Contains 66 references.) (EAM)

Tourism Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide, focusing on tourism studies, defines competencies that: help students build daily living skills, investigate career options in the design and repair of motor vehicles, use technology in these fields effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. Section A…

Liminality as Thought and Action

ERIC Educational Resources Information Center

Emmanuel, Donna T.

2011-01-01

Turner's (1974) conception of liminal space provides an entry point to look beyond the given and to create opportunities to examine, critique, and challenge the assumptions inherent in many music programs. Building upon his theory of liminality as a place that is "ambiguous, neither here or there, betwixt and between all fixed points of…

Logistics. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in logistics occupations, use technology in the logistics field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale and…

77 FR 12353 - Shipping Coordinating Committee; Notice of Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-29

...); Provision of financial security in cases of abandonment, personal injury to, or death of seafarers related to entry into force of the International Labour Organization Maritime Labour Convention, 2006; Fair... to the seating capacity of the room. To facilitate the building security process, and to request...

Build It and They Will Come: Addressing the Problem of Declining Entry-Level Skills.

ERIC Educational Resources Information Center

Koontz, Paul

2000-01-01

The growing gap between the skills of the work force and the technical requirements of today's jobs have reemphasized the need to transform the educational system to provide the solid academic and technical skills required by the jobs of today and tomorrow. (Author)

Trade Related Reading Packets for Disabled Readers.

ERIC Educational Resources Information Center

Davis, Beverly; Woodruff, Nancy S.

Six trade-related reading packets for disabled readers are provided for these trades: assemblers, baking, building maintenance, data entry, interior landscaping, and warehousing. Each packet stresses from 9 to 14 skills. Those skills common to most packets include context clues, fact or opinion, details, following directions, main idea,…

6. VIEW NORTH, INTERIOR OF STORE Note ceiling stripped for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW NORTH, INTERIOR OF STORE Note ceiling stripped for addition of supports, but tongue and groove wall panelling and shelving showing. To the left the stairway enclosure was added with door for front entry to the upper apartments. - 510 Central Avenue (Commercial Building), Ridgely, Caroline County, MD

Methods and Software for Building Bibliographic Data Bases.

ERIC Educational Resources Information Center

Daehn, Ralph M.

1985-01-01

This in-depth look at database management systems (DBMS) for microcomputers covers data entry, information retrieval, security, DBMS software and design, and downloading of literature search results. The advantages of in-house systems versus online search vendors are discussed, and specifications of three software packages and 14 sources are…

Review of Air Exchange Rate Models for Air Pollution Exposure Assessments

EPA Science Inventory

A critical aspect of air pollution exposure assessments is estimation of the air exchange rate (AER) for various buildings, where people spend their time. The AER, which is rate the exchange of indoor air with outdoor air, is an important determinant for entry of outdoor air pol...

77 FR 15994 - Southern Region Recreation Resource Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-19

... proposals for areas managed by the Forest Service in Alabama, Arkansas, Florida, Georgia, Kentucky... hard copy of the agenda, should contact Caroline Mitchell at PO Box 1270, Hot Springs, AR 71902 or by... call ahead to facilitate entry into the building. FOR FURTHER INFORMATION CONTACT: Caroline Mitchell...

75 FR 5561 - Information Collection; Disposal of Mineral Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... Ivette Torres, Liaison Specialist, Minerals and Geology Management, Mail Stop 1126, 1601 N. Kent Street... Office of the Director, Minerals and Geology Management, 1601 N. Kent Street[boxh]5th Floor, Forest... and Geology Management Staff at 703-605-4792 to facilitate entry to the building. Individuals who use...

Safe Entry, Easy Exit

ERIC Educational Resources Information Center

Kennedy, Mike

2008-01-01

After violent episodes too numerous to list and too terrible to forget, schools and universities have been focused for several years on enhancing security in their facilities. Doors are among the most critical points of concern for school personnel responsible for keeping buildings safe. Education institutions want doors that let the right people…

EFFECTS OF NATURAL AND FORCED BASEMENT VENTILATION ON RADON LEVELS IN SINGLE FAMILY DWELLINGS

EPA Science Inventory

The report gives, for the first time, results of an extensive study of the effect of ventilation on radon concentrations and radon entry rate in a single-family dwelling. Measurements of radon concentrations, building dynamics, and environmental parameters made in Princeton Unive...

Financial Management. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in financial management, use technology in the financial management field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale…

F-35 Engine Quality Assurance Inspection

DTIC Science & Technology

2015-04-27

area nor protected from common FOD items. The F135 engine final assembly area had FOD signage at the two entry lobbies of the building; however...there were no FOD signage within the engine final assembly areas. Pratt & Whitney FOD procedures also did not prevent common FOD items from entering

Architectural/Building Programming: An Annotated Bibliography.

ERIC Educational Resources Information Center

Turner, George E.

This 34-item bibliography brings together the random articles about programing, which have appeared in a variety of publications, to establish a resource for architectural students and practitioners who need a clearer understanding of the nature of architectural programing. The entries are divided into those that serve as an introduction to either…

Window type: 4x4 multipaned steel window flanked by 1x4 multipaned ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Window type: 4x4 multipaned steel window flanked by 1x4 multipaned steel, casements. Concrete stoop, entry overhang and pipe rail detail also illustrated. Building 36, facing northwest - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

Construction Trades Related Areas Curriculum Guide. Michigan Trade and Industrial Education.

ERIC Educational Resources Information Center

Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

This task-based curriculum guide is intended to help secondary teachers provide relevant training for an entry-level job in related building trades procedures. Introductory materials include background information on trade and industrial education and program goals and safety information. Descriptions follow of the construction trades program,…

Cosmetology Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in cosmetology, use technology in the cosmetology field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program rationale and…

Orion Capsule Handling Qualities for Atmospheric Entry

NASA Technical Reports Server (NTRS)

Tigges, Michael A.; Bihari, Brian D.; Stephens, John-Paul; Vos, Gordon A.; Bilimoria, Karl D.; Mueller, Eric R.; Law, Howard G.; Johnson, Wyatt; Bailey, Randall E.; Jackson, Bruce

2011-01-01

Two piloted simulations were conducted at NASA's Johnson Space Center using the Cooper-Harper scale to study the handling qualities of the Orion Command Module capsule during atmospheric entry flight. The simulations were conducted using high fidelity 6-DOF simulators for Lunar Return Skip Entry and International Space Station Return Direct Entry flight using bank angle steering commands generated by either the Primary (PredGuid) or Backup (PLM) guidance algorithms. For both evaluations, manual control of bank angle began after descending through Entry Interface into the atmosphere until drogue chutes deployment. Pilots were able to use defined bank management and reversal criteria to accurately track the bank angle commands, and stay within flight performance metrics of landing accuracy, g-loads, and propellant consumption, suggesting that the pilotability of Orion under manual control is both achievable and provides adequate trajectory performance with acceptable levels of pilot effort. Another significant result of these analyses is the applicability of flying a complex entry task under high speed entry flight conditions relevant to the next generation Multi Purpose Crew Vehicle return from Mars and Near Earth Objects.

Apollo experience report: Mission planning for Apollo entry

NASA Technical Reports Server (NTRS)

Graves, C. A.; Harpold, J. C.

1972-01-01

The problems encountered and the experience gained in the entry mission plans, flight software, trajectory-monitoring procedures, and backup trajectory-control techniques of the Apollo Program should provide a foundation upon which future spacecraft programs can be developed. Descriptions of these entry activities are presented. Also, to provide additional background information needed for discussion of the Apollo entry experience, descriptions of the entry targeting for the Apollo 11 mission and the postflight analysis of the Apollo 10 mission are presented.

Encyclopedia of Birth Control.

ERIC Educational Resources Information Center

Rengel, Marian

This encyclopedia brings together in more than 200 entries, arranged in A-to-Z format, a portrait of the complex modern issue that birth control has become with advances in medicine and biochemistry during the 20th century. It is aimed at both the student and the consumer of birth control. Entries cover the following topics: birth control…

76 FR 79054 - The Commerce Control List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-21

... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction 0 In Title 15 of the Code of Federal Regulations, Parts 300 to 799, revised as of... entry in the table under Reasons for control for NS Column 1 and adding an entry following the remaining...

33 CFR 105.260 - Security measures for restricted areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; (7) Control the entry, parking, loading and unloading of vehicles; (8) Control the movement and...) Using security personnel, automatic intrusion detection devices, surveillance equipment, or surveillance systems to detect unauthorized entry or movement within restricted areas; (7) Directing the parking...

33 CFR 105.260 - Security measures for restricted areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

...; (7) Control the entry, parking, loading and unloading of vehicles; (8) Control the movement and...) Using security personnel, automatic intrusion detection devices, surveillance equipment, or surveillance systems to detect unauthorized entry or movement within restricted areas; (7) Directing the parking...

Sliding mode control for Mars entry based on extended state observer

NASA Astrophysics Data System (ADS)

Lu, Kunfeng; Xia, Yuanqing; Shen, Ganghui; Yu, Chunmei; Zhou, Liuyu; Zhang, Lijun

2017-11-01

This paper addresses high-precision Mars entry guidance and control approach via sliding mode control (SMC) and Extended State Observer (ESO). First, differential flatness (DF) approach is applied to the dynamic equations of the entry vehicle to represent the state variables more conveniently. Then, the presented SMC law can guarantee the property of finite-time convergence of tracking error, which requires no information on high uncertainties that are estimated by ESO, and the rigorous proof of tracking error convergence is given. Finally, Monte Carlo simulation results are presented to demonstrate the effectiveness of the suggested approach.

Orion Entry Handling Qualities Assessments

NASA Technical Reports Server (NTRS)

Bihari, B.; Tiggers, M.; Strahan, A.; Gonzalez, R.; Sullivan, K.; Stephens, J. P.; Hart, J.; Law, H., III; Bilimoria, K.; Bailey, R.

2011-01-01

The Orion Command Module (CM) is a capsule designed to bring crew back from the International Space Station (ISS), the moon and beyond. The atmospheric entry portion of the flight is deigned to be flown in autopilot mode for nominal situations. However, there exists the possibility for the crew to take over manual control in off-nominal situations. In these instances, the spacecraft must meet specific handling qualities criteria. To address these criteria two separate assessments of the Orion CM s entry Handling Qualities (HQ) were conducted at NASA s Johnson Space Center (JSC) using the Cooper-Harper scale (Cooper & Harper, 1969). These assessments were conducted in the summers of 2008 and 2010 using the Advanced NASA Technology Architecture for Exploration Studies (ANTARES) six degree of freedom, high fidelity Guidance, Navigation, and Control (GN&C) simulation. This paper will address the specifics of the handling qualities criteria, the vehicle configuration, the scenarios flown, the simulation background and setup, crew interfaces and displays, piloting techniques, ratings and crew comments, pre- and post-fight briefings, lessons learned and changes made to improve the overall system performance. The data collection tools, methods, data reduction and output reports will also be discussed. The objective of the 2008 entry HQ assessment was to evaluate the handling qualities of the CM during a lunar skip return. A lunar skip entry case was selected because it was considered the most demanding of all bank control scenarios. Even though skip entry is not planned to be flown manually, it was hypothesized that if a pilot could fly the harder skip entry case, then they could also fly a simpler loads managed or ballistic (constant bank rate command) entry scenario. In addition, with the evaluation set-up of multiple tasks within the entry case, handling qualities ratings collected in the evaluation could be used to assess other scenarios such as the constant bank angle maintenance case. The 2008 entry assessment was divided into two sections (see Figure 1). Entry I was the first, high speed portion of a lunar return and Entry II was the second, lower speed portion of a lunar return, which is similar (but not identical) to a typical ISS return.

75 FR 5579 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... with re-entry controlled by passwords. The DLA Enterprise Hotline Program Database is also password...: * * * * * System location: Delete entry and replace with ``Director, DLA Accountability Office (DA), Headquarters....'' * * * * * Retention and disposal: Delete entry and replace with ``Records are destroyed/deleted 10 years after...

Scratch2 prevents cell cycle re-entry by repressing miR-25 in postmitotic primary neurons.

PubMed

Rodríguez-Aznar, Eva; Barrallo-Gimeno, Alejandro; Nieto, M Angela

2013-03-20

During the development of the nervous system the regulation of cell cycle, differentiation, and survival is tightly interlinked. Newly generated neurons must keep cell cycle components under strict control, as cell cycle re-entry leads to neuronal degeneration and death. However, despite their relevance, the mechanisms controlling this process remain largely unexplored. Here we show that Scratch2 is involved in the control of the cell cycle in neurons in the developing spinal cord of the zebrafish embryo. scratch2 knockdown induces postmitotic neurons to re-enter mitosis. Scratch2 prevents cell cycle re-entry by maintaining high levels of the cycle inhibitor p57 through the downregulation of miR-25. Thus, Scratch2 appears to safeguard the homeostasis of postmitotic primary neurons by preventing cell cycle re-entry.

32 CFR 761.4 - Special provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Kirtland Air Force Base, NM 87115. (c) Entry into Johnston Atoll is controlled by the Defense Nuclear Agency. Inquiries concerning entries into Johnston Atoll should be directed to: Commander, Johnston Atoll... Kwajalein Atoll under military jurisdiction is controlled by the Department of the Army. Inquiries...

32 CFR 761.4 - Special provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Kirtland Air Force Base, NM 87115. (c) Entry into Johnston Atoll is controlled by the Defense Nuclear Agency. Inquiries concerning entries into Johnston Atoll should be directed to: Commander, Johnston Atoll... Kwajalein Atoll under military jurisdiction is controlled by the Department of the Army. Inquiries...

32 CFR 761.4 - Special provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Kirtland Air Force Base, NM 87115. (c) Entry into Johnston Atoll is controlled by the Defense Nuclear Agency. Inquiries concerning entries into Johnston Atoll should be directed to: Commander, Johnston Atoll... Kwajalein Atoll under military jurisdiction is controlled by the Department of the Army. Inquiries...

32 CFR 761.4 - Special provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Kirtland Air Force Base, NM 87115. (c) Entry into Johnston Atoll is controlled by the Defense Nuclear Agency. Inquiries concerning entries into Johnston Atoll should be directed to: Commander, Johnston Atoll... Kwajalein Atoll under military jurisdiction is controlled by the Department of the Army. Inquiries...

32 CFR 761.4 - Special provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Kirtland Air Force Base, NM 87115. (c) Entry into Johnston Atoll is controlled by the Defense Nuclear Agency. Inquiries concerning entries into Johnston Atoll should be directed to: Commander, Johnston Atoll... Kwajalein Atoll under military jurisdiction is controlled by the Department of the Army. Inquiries...

STS-125 Flight Control Team in WFCR - Ascent/Entry with Flight Director Norman Knight

NASA Image and Video Library

2009-05-21

JSC2009-E-121353 (21 May 2009) --- The members of the STS-125 Ascent and Entry flight control team pose for a group portrait in the space shuttle flight control room in the Mission Control Center at NASA's Johnson Space Center. Flight director Norm Knight (left) and astronaut Gregory H. Johnson, spacecraft communicator (CAPCOM), hold the STS-125 mission logo.

77 FR 39162 - Implementation of the Understandings Reached at the 2011 Australia Group (AG) Plenary Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-02

... June 2011 plenary meeting of the Australia Group (AG). This rule amends the Commerce Control List (CCL) entry in the EAR that controls human and zoonotic pathogens and ``toxins'' and the entry that controls...-03] RIN 0694-AF45 Implementation of the Understandings Reached at the 2011 Australia Group (AG...

Energy and Mines. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in energy and mines, use technology in the fields of energy and mining effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program…

To amend title 40, United States Code, concerning the calculation of transactions for the lease of land ports of entry and international bridges, and for other purposes.

THOMAS, 113th Congress

Rep. Owens, William L. [D-NY-21

2013-03-19

House - 03/20/2013 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Decoding Area Studies and Interdisciplinary Majors: Building a Framework for Entry-Level Students

ERIC Educational Resources Information Center

MacPherson, Kristina Ruth

2015-01-01

Decoding disciplinary expertise for novices is increasingly part of the undergraduate curriculum. But how might area studies and other interdisciplinary programs, which require integration of courses from multiple disciplines, decode expertise in a similar fashion? Additionally, as a part of decoding area studies and interdisciplines, how might a…

Millennials Invading: Building Training for Today's Admissions Counselors

ERIC Educational Resources Information Center

Barnds, W. Kent

2009-01-01

As chief admissions officer at two small colleges, the author has been responsible, in part, for ensuring that entry-level admissions counselors are trained properly. He learned through trial and error, and has adapted his methods to be increasingly sensitive to the learning curve of new employees. His thoughts about training new admissions…

Property Management and Maintenance. Sacramento County Bilingual Vocational Training Program.

ERIC Educational Resources Information Center

Elk Grove Unified School District, CA.

This curriculum guide provides materials for a course that prepares limited English speaking Indochinese adults for entry-level employment in the field of property management and building maintenance. Information on the project that developed these materials is followed by a curriculum outline for the Vocational English as a Second Language (VESL)…

Preservice Primary Teachers' Geometric Thinking: Is Pre-Tertiary Mathematics Education Building Sufficiently Strong Foundations?

ERIC Educational Resources Information Center

Hourigan, Mairéad; Leavy, Aisling M.

2017-01-01

Teacher knowledge is a critical focus of educational research in light of the potential impact of teacher knowledge on student learning. The dearth of research exploring entry-level preservice teachers' geometric knowledge poses an onerous challenge for mathematics educators in initial teacher education (ITE) when designing experiences that…

Cybersecurity Education: Bridging the Gap between Hardware and Software Domains

ERIC Educational Resources Information Center

Lukowiak, Marcin; Radziszowski, Stanislaw; Vallino, James; Wood, Christopher

2014-01-01

With the continuous growth of cyberinfrastructure throughout modern society, the need for secure computing and communication is more important than ever before. As a result, there is also an increasing need for entry-level developers who are capable of designing and building practical solutions for systems with stringent security requirements.…

Keyless Entry: Building a Text Database Using OCR Technology.

ERIC Educational Resources Information Center

Grotophorst, Clyde W.

1989-01-01

Discusses the use of optical character recognition (OCR) technology to produce an ASCII text database. A tutorial on digital scanning and OCR is provided, and a systems integration project which used the Calera CDP-3000XF scanner and text retrieval software to construct a database of dissertations at George Mason University is described. (four…

Relationship of Preschool Academic Skill Deficits to Subsequent Acquisition of Reading and Mathematic Skills.

ERIC Educational Resources Information Center

Morrow, Robert D.; McBride, Hugh J.

This article discusses the assessment of language and cognitive development as reflected in preschool activities and describes the Preschool Language-Cognitive Assessment for Curriculum Entry (PLACE). Five task-skill areas associated with common preschool activities (building with blocks, completing puzzles, pounding pegs, etc) are identified. How…

Building Capacity for Trauma Intervention across Child-Serving Systems

ERIC Educational Resources Information Center

Chinitz, Susan; Stettler, Erin M.; Giammanco, Denise; Silverman, Marian; Briggs, Rahil D.; Loeb, Joanne

2010-01-01

Infants most vulnerable to trauma are often the least able to access interventions. Universal child-serving systems, such as primary pediatrics, early care and education, and the child welfare system, can offer a port of entry for millions of children annually for trauma-related supports and services. However, practitioners in these systems have…

Strategies for Individualizing Instruction across the Disciplines for the Culturally Diverse Learner.

ERIC Educational Resources Information Center

Smith, Ann

Educational institutions need to recognize and accommodate the individual needs of learners from culturally diverse backgrounds, of whom a large number are Blacks and Hispanics. To accommodate the educational needs of these learners, educators need to build on their entry-level strengths, which have been identified as: (1) orientation toward…

75 FR 10206 - Codex Alimentarius Commission: Meeting of the Codex Committee on Contaminants in Food

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-05

.... Early registration is encouraged because it will expedite entry into the building and its parking area. If you require parking, please include the vehicle make and tag number, if known, when you register... service which provides automatic and customized access to selected food safety news and information. This...

77 FR 5481 - Codex Alimentarius Commission: Meeting of the Codex Committee on Contaminants in Food

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-03

... expedite entry into the building and its parking area. You should also bring photo identification and plan for adequate time to pass through security screening systems. If you require parking, please include... automatic and customized access to selected food safety news and information. This service is available at...

75 FR 4523 - Codex Alimentarius Commission: Meeting of the Codex Committee on Food Additives

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... registration is encouraged because it will expedite entry into the building and its parking area. If you require parking, please include the vehicle make and tag number when you register. Because the meeting... provides automatic and customized access to selected food safety news and information. This service is...

32 CFR 761.11 - Persons: Individual authorizations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ADMINISTRATION, AND THE TRUST TERRITORY OF THE PACIFIC ISLANDS Entry Authorization § 761.11 Persons: Individual... may be empowered to do or for forwarding the application to the nearest Entry Control Commander...) Applications for entry authorizations will be made on the standard form Statement of Personal History, DD 398...

FLPP IXV Re-Entry Vehicle, Supersonic Charectisation Based on DNW SST Wind Tunnel Tests and CFD

NASA Astrophysics Data System (ADS)

Kapteijn, C.; Maseland, H.; Chiarelli, C.; Mareschi, V.; Tribot, J.-P.; Binetti, P.; Walloscheck, T.

2009-01-01

The European Space Agency ESA, has engaged in 2004, the IXV project (Intermediate eXperimental Vehicle) which is part of the FLPP (Future Launcher Preparatory Programme) aiming at answering to critical technological issues for controlled re-entry, while supporting the future generation launchers and to improve in general European capabilities in the strategic field of atmospheric re-entry for future space transportation, exploration and scientific applications. The IXV key mission and system objectives are the design, development, manufacturing, assembling and on- ground to in-flight verification of an autonomous European lifting and aerodynamically controlled re- entry system, integrating the critical re- entry technologies at the system level. In particular, the IXV shall demonstrate system integrated key technologies such as lifting flight control by means of aerodynamic surfaces that are one of the main primary objectives of the experimental investigation. Lifting and aerodynamic controlled re-entry represents a significant capability advancement with respect to the ballistic re-entry of capsules like the ARD. Since hypersonic aerodynamics is essentially different from supersonic aerodynamics, the current mission is to perform an atmospheric re-entry in combination with a safe recovery the in supersonic flight regime. However, mission extension to trimmed transonic flight is under consideration based on a preliminary analysis of the aerodynamic characteristics of the IXV configuration. Since the beginning of the IXV project, an aerodynamic data base (AEDB) has been built up and continuously updated integrating the additional information mainly provided by means of CFD (ie: Euler and Navier-Stokes) and lately also by means of WTTs. This AEDB serves for flying qualities analysis and for re-entry simulations. During the development phase B2/C1, the effectiveness of the control surfaces and their impact on te vehicle's aerodynamic forces in the supersonic regime is measured for a number of discrete deflection settings in the Super-Sonic wind Tunnel (SST) of DNW. Enabling an improved understanding of the measured aerodynamic characteristics, complementary computations were performed by Thales Alenia Space. The complete set of data was analyzed and compared enabling a consolidation of the nominal aerodynamic and aerodynamic uncertainties as well. The paper presents the main objectives of the supersonic characterisation of IXV including WTTs, and the main outcomes of the current data comparisons.

32 CFR 761.9 - Entry Control Commanders.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the Army or the Defense Nuclear Agency. (h) Senior naval commander in defense area. Emergency... 32 National Defense 5 2011-07-01 2011-07-01 false Entry Control Commanders. 761.9 Section 761.9 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY ISLANDS UNDER NAVY JURISDICTION...

32 CFR 761.9 - Entry Control Commanders.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the Army or the Defense Nuclear Agency. (h) Senior naval commander in defense area. Emergency... 32 National Defense 5 2012-07-01 2012-07-01 false Entry Control Commanders. 761.9 Section 761.9 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY ISLANDS UNDER NAVY JURISDICTION...

32 CFR 761.9 - Entry Control Commanders.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the Army or the Defense Nuclear Agency. (h) Senior naval commander in defense area. Emergency... 32 National Defense 5 2014-07-01 2014-07-01 false Entry Control Commanders. 761.9 Section 761.9 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY ISLANDS UNDER NAVY JURISDICTION...

32 CFR 761.9 - Entry Control Commanders.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the Army or the Defense Nuclear Agency. (h) Senior naval commander in defense area. Emergency... 32 National Defense 5 2013-07-01 2013-07-01 false Entry Control Commanders. 761.9 Section 761.9 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY ISLANDS UNDER NAVY JURISDICTION...

On Building an Ontological Knowledge Base for Managing Patient Safety Events.

PubMed

Liang, Chen; Gong, Yang

2015-01-01

Over the past decade, improving healthcare quality and safety through patient safety event reporting systems has drawn much attention. Unfortunately, such systems are suffering from low data quality, inefficient data entry and ineffective information retrieval. For improving the systems, we develop a semantic web ontology based on the WHO International Classification for Patient Safety (ICPS) and AHRQ Common Formats for patient safety event reporting. The ontology holds potential in enhancing knowledge management and information retrieval, as well as providing flexible data entry and case analysis for both reporters and reviewers of patient safety events. In this paper, we detailed our efforts in data acquisition, transformation, implementation and initial evaluation of the ontology.

10. ENTRY STAIRWELL TO CABLE TUNNEL, ABOUT THREE QUARTERS THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. ENTRY STAIRWELL TO CABLE TUNNEL, ABOUT THREE QUARTERS THE DISTANCE TO THE SLED LAUNCHING PAD FROM THE FIRING CONTROL BLOCKHOUSE 0545. Looking west northwest. - Edwards Air Force Base, South Base Sled Track, Firing Control Blockhouse, South of Sled Track at east end, Lancaster, Los Angeles County, CA

Problems in air traffic management. VI., Interaction of training-entry age with intellectual and personality characteristics of air traffic control specialists.

DOT National Transportation Integrated Search

1965-07-01

Over 900 Enroute and Terminal Air Traffic Controller Specialist (ATCS) trainees were administered a large number of aptitude and personality tests. Examination of the relationships between the performance scores and age at entry into training reveale...

Developing Community Reinforcement and Family Training (CRAFT) for Parents of Treatment-Resistant Adolescents

ERIC Educational Resources Information Center

Kirby, Kimberly C.; Versek, Brian; Kerwin, MaryLouise E.; Meyers, Kathleen; Benishek, Lois A.; Bresani, Elena; Washio, Yukiko; Arria, Amelia; Meyers, Robert J.

2015-01-01

We describe a project focused on training parents to facilitate their treatment-resistant adolescent's treatment entry and to manage their child after entry into community-based treatment. Controlled studies show that Community Reinforcement and Family Training (CRAFT) is a unilateral treatment that fosters treatment entry of adults; however,…

Can We Improve the Tolerance of an Ocular Prosthesis by Enhancing Its Surface Finish?

PubMed

Litwin, Andre S; Worrell, Emma; Roos, Jonathan C P; Edwards, Barry; Malhotra, Raman

Patients who wear an ocular prosthesis frequently suffer with dry eye symptoms and socket discharge, often on a daily basis. The aim of the study was to determine whether a smoother, optical quality polish of the prosthesis' surface could improve symptoms and wear tolerance. The study was designed as single-center, single-masked, prospective randomized controlled trial. Eighty-eight consecutive patients undergoing annual ocular prosthesis maintenance review were approached from the prosthesis clinic. Forty-one out of 49 eligible patients were recruited. Participants were randomized to either a standard or a higher "optical quality" polish of their prosthesis. At entry to the trial, at 1 month, and 12 months they completed a questionnaire covering cleaning, lubricant use, inflammation, discomfort, and discharge. Lower scores indicated better tolerance of the prosthesis. At each visit, the prosthesis was stained and photographed against a standard background to assess deposit build up. Primary outcome measures were 1) a subjective questionnaire score and 2) an objective assessment of surface deposit build-up on prosthetic eyes by standardized photographic grading. Forty-one patients participated in the study. The median age of their prosthesis was 36 months (range 9 months-40 years). There was no statistically significant difference in questionnaire scores or deposit build up between the 2 groups at baseline. By 12-months, the higher optical quality polish showed a statistically significant reduction in symptoms and frequency of discharge (2.19 vs. 3.85; p = 0.05-lower scores better). Scoring of the prosthesis' deposit build-up showed a significant difference at 1 month, but this was not sustained at 12 months. Creating an optical quality finish to an ocular prosthesis reduces deposit build up on artificial eyes. The authors found this modification improved patient tolerance at 12 months.

Shuttle program. MCC Level C formulation requirements: Entry guidance and entry autopilot

NASA Technical Reports Server (NTRS)

Harpold, J. C.; Hill, O.

1980-01-01

A set of preliminary entry guidance and autopilot software formulations is presented for use in the Mission Control Center (MCC) entry processor. These software formulations meet all level B requirements. Revision 2 incorporates the modifications required to functionally simulate optimal TAEM targeting capability (OTT). Implementation of this logic in the MCC must be coordinated with flight software OTT implementation and MCC TAEM guidance OTT. The entry guidance logic is based on the Orbiter avionics entry guidance software. This MCC requirements document contains a definition of coordinate systems, a list of parameter definitions for the software formulations, a description of the entry guidance detailed formulation requirements, a description of the detailed autopilot formulation requirements, a description of the targeting routine, and a set of formulation flow charts.

A Business Case for Home Performance Contracting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Antonopoulos, Chrissi A.; Sevigny, Maureen

This report was prepared by PNNL for the DOE Building America program. The report provides information for businesses considering entering the home performance contracting industry. Metrics discussed include industry trends and drivers, specific points of entry, business models, startup costs, and marketing strategies. The report includes detailed analysis of eight businesses around the country that have successfully entered the home performance contracting industry. Data is provided on their financial structures, program participation, marketing efforts, and staff training. This report will be distributed via the DOE Building America website, www.buildingamerica.gov. Individual case studies will also be cleared separately.

Temporal associations between substance use and delinquency among youth with a first time offense

PubMed Central

Hunter, Sarah B.; Miles, Jeremy N.V.; Pedersen, Eric R.; Ewing, Brett A.; D’Amico, Elizabeth J.

2014-01-01

OBJECTIVE Substance use and delinquency among adolescents has been shown to be positively associated; however, the temporal relationship is not well understood. Examining the association between delinquency and substance use is especially relevant among adolescents with a first-time substance use related offense as they are at-risk for future problems. METHOD Data from 193 adolescents at time of diversion program entry and six months later was examined using cross-lagged path analysis to determine whether substance use and related consequences were associated with other types of delinquency across time. RESULTS Results demonstrated that delinquency at program entry was related to subsequent reports of heavy drinking and alcohol consequences, but not marijuana use or its consequences. In contrast, alcohol and marijuana use at program entry was not related to future reports of delinquency. CONCLUSIONS Findings emphasize the need to build in comprehensive assessments and interventions for youth with a first time offense in order to prevent further escalation of substance use and criminal behaviors. PMID:24656642

Temporal associations between substance use and delinquency among youth with a first time offense.

PubMed

Hunter, Sarah B; Miles, Jeremy N V; Pedersen, Eric R; Ewing, Brett A; D'Amico, Elizabeth J

2014-06-01

Substance use and delinquency among adolescents have been shown to be positively associated; however, the temporal relationship is not well understood. Examining the association between delinquency and substance use is especially relevant among adolescents with a first-time substance use related offense as they are at-risk for future problems. Data from 193 adolescents at time of diversion program entry and six months later was examined using cross-lagged path analysis to determine whether substance use and related consequences were associated with other types of delinquency across time. Results demonstrated that delinquency at program entry was related to subsequent reports of heavy drinking and alcohol consequences, but not marijuana use or its consequences. In contrast, alcohol and marijuana use at program entry were not related to future reports of delinquency. Findings emphasize the need to build in comprehensive assessments and interventions for youth with a first time offense in order to prevent further escalation of substance use and criminal behaviors. Copyright © 2014 Elsevier Ltd. All rights reserved.

76 FR 54259 - Virginia Electric and Power Company, Docket Nos. 50-338 and 50-339, North Anna Power Station...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

... The proposed action would provide exemption from the work hour control requirements of 10 CFR 26.205(c... conditions similar to entry into the site emergency plan where the imposition of work hour controls on vital.... Additionally, the time from entry into the condition in which the work hour control exemption applies, to...

Differences in the element contents between gunshot entry wounds with full-jacketed bullet and lead bullet.

PubMed

Wunnapuk, Klintean; Durongkadech, Piya; Minami, Takeshi; Ruangyuttikarn, Werawan; Tohno, Setsuko; Vichairat, Karnda; Azuma, Cho; Sribanditmongkol, Pongruk; Tohno, Yoshiyuki

2007-01-01

To elucidate characteristics of gunshot residues in gunshot entry wounds with full-jacketed and lead bullets, element contents in entry gunshot wounds and control skins were analyzed by inductively coupled plasma-atomic emission spectrometry (ICP-AES). It was found that a high content of Fe and Zn was deposited in the gunshot entry wounds with full-jacketed bullet, whereas a high content of Pb was deposited in the gunshot entry wounds with lead (unjacked) bullet. It should be noted that the content of Pb was significantly higher in the gunshot entry wounds with lead bullet than in those with full-jacketed bullet. Regarding the relationships among elements, it was found that there were significant direct correlations between Pb and either Sb or Ba contents in both gunshot entry wounds with full-jacketed and lead bullets. As Pb increased in both gunshot entry wounds, Sb and Ba also increased in the wounds.

76 FR 48803 - Application(s) for Duty-Free Entry of Scientific Instruments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... Importation Act of 1966 (Pub. L. 89-651, as amended by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301), we... California Los Angeles, 595 Charles E. Young Drive East, 3806 Geology Building, Los Angeles, CA 90095.... Application accepted by Commissioner of Customs: July 27, 2011. Dated: August 3, 2011. Gregory W. Campbell...

How Successful Superintendents Build Trusting Relationships with Their School Boards during Their Entry Period

ERIC Educational Resources Information Center

Smith, Morgan Wilder

2012-01-01

This study focuses on how superintendents who have experienced success, as measured by having a school district achieve and consistently achieve in the face of many challenges today. Several key strategies and leadership frameworks that superintendents use are examined through a review of current research and are validated by reviewing the results…

27 CFR 70.31 - Entry of premises for examination of taxable objects.

Code of Federal Regulations, 2010 CFR

2010-04-01

... said articles or objects and also enter at night any such building or place, while open, for a similar purpose. (b) Distilled spirits plants. Any appropriate TTB officer may, at all times, as well by night as by day, enter any plant or any other premises where distilled spirits are produced or rectified, or...

KSC-06pd2219

NASA Image and Video Library

2006-09-26

KENNEDY SPACE CENTER, FLA. - Following ribbon-cutting ceremony, workers and officials wait outside the west door to the Operations and Checkout Building for its reactivation as the entry into the crew exploration vehicle environment. During the rest of the decade, KSC will transition from launching space shuttles to launching new vehicles in NASA’s Vision For Space Exploration. Photo credit: NASA/Kim Shiflett

An Early Look at the Career Ready Internship Program. Issue Focus

ERIC Educational Resources Information Center

Rutschow, Elizabeth Zachry; Taketa, Jessica

2017-01-01

While a college degree offers the opportunity for increased income, a degree alone does not guarantee a student's successful entry into the workforce. Work-based learning, such as internships and apprenticeship programs, has become an increasingly popular way to help students build workforce skills and experience and gain real-world exposure to a…

78 FR 17993 - Industry Advisory Panel; Notice of Open Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-25

... DEPARTMENT OF STATE [Public Notice 8253] Industry Advisory Panel; Notice of Open Meeting The... meeting is open to the public and will be held in the Loy Henderson Conference Room of the U.S. Department... will meet once annually in a session that will be open to the public. Entry to the building is...

Slushie World: An In-Class Access Database Tutorial

ERIC Educational Resources Information Center

Wynn, Donald E., Jr.; Pratt, Renée M. E.

2015-01-01

The Slushie World case study is designed to teach the basics of Microsoft Access and database management over a series of three 75-minute class sessions. Students are asked to build a basic database to track sales and inventory for a small business. Skills to be learned include table creation, data entry and importing, form and report design,…

Shifting the Role: School-District Superintendents' Experiences as They Build a Learning Community

ERIC Educational Resources Information Center

Dickson, John; Mitchell, Coral

2014-01-01

This paper presents the findings of a qualitative action-research study that explored how one group of district-level school superintendents conceptualized their role as they built their own learning community. Data analysis yielded four elements that supported the participants' efforts: (a) using a process as an entry point, (b) aligning various…

County-Level Estimates of the Effects of a Universal Preschool Program in California

ERIC Educational Resources Information Center

Karoly, Lynn A.

2005-01-01

Growing interest in universal preschool education has prompted researchers to examine the potential costs and benefits of making high-quality preschool available for all children one or two years before kindergarten entry. The analysis reported in this document builds on a previous RAND study which estimated that a high-quality, one-year,…

Basement radon entry and stack driven moisture infiltration reduced by active soil depressurization

Treesearch

C.R. Boardman; Samuel V. Glass

2015-01-01

This case study presents measurements of radon and moisture infiltration from soil gases into the basement of an unoccupied research house in Madison, Wisconsin, over two full years. The basement floor and exterior walls were constructed with preservative-treated lumber and plywood. In addition to continuous radon monitoring, measurements included building air...

A "Career Ladder" Approach to Junior College Curriculum.

ERIC Educational Resources Information Center

Schrupp, Harold A.

More attention should be paid to the building of career guidance and career curriculum programs with exit points that enable the student to seek employment at any time in an entry level position and/or to continue his education. Some of the best "career ladder" programs are the federally sponsored New Career programs. A number of the…

Providing Worker Education and Building the Labor Movement: The Joseph S. Murphy Institute of City University of New York

ERIC Educational Resources Information Center

D'Amico, Deborah

2011-01-01

To provide equitable access to formal, nonformal and workplace learning, experts urge community, business, education and government partnerships. While membership in unions continues to decline and "opportunities for entry-level workers to become skilled workers is lessening," the partnership described in this article shows that it is…

76 FR 8710 - Codex Alimentarius Commission: Meeting of the Codex Committee on Contaminants in Food

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

... registration is encouraged as it will expedite entry into the building and its parking area. You should also... require parking, please include the vehicle make and tag number when you register. Attendees that are not... provides automatic and customized access to selected food safety news and information. This service is...

Longitudinal control effectiveness and entry dynamics of a single-stage-to-orbit vehicle

NASA Technical Reports Server (NTRS)

Vinh, N. X.; Lin, C. F.

1982-01-01

The classical theory of flight dynamics for airplane longitudinal stability and control analysis was extended to the case of a hypervelocity reentry vehicle. This includes the elements inherent in supersonic and hypersonic flight such as the influence of the Mach number on aerodynamic characteristics, and the effect of the reaction control system and aerodynamic controls on the trim condition through a wide range of speed. Phugoid motion and angle of attack oscillation for typical cases of cruising flight, ballistic entry, and glide entry are investigated. In each case, closed form solutions for the variations in altitude, flight path angle, speed and angle of attack are obtained. The solutions explicitly display the influence of different regions design parameters and trajectory variables on the stability of the motion.

Intermediate Experimental Vehicle, ESA Program IXV ATDB Tool and Aerothermodynamic Characterization

NASA Astrophysics Data System (ADS)

Mareschi, Vincenzo; Ferrarella, Daniela; Zaccagnino, Elio; Tribot, Jean-Pierre; Vallee, Jean-Jacques; Haya-Ramos, Rodrigo; Rufolo, Giuseppe; Mancuso, Salvatore

2011-05-01

In the complex domain of the space technologies and among the different applications available in Europe, a great interest has been placed since several years in the development of re-entry technologies. Among the different achievements obtained in that field it is to be recalled the experience of the Atmospheric Re-entry Vehicle flight in 1998 and a certain number of important investments per-formed at Agency and national levels like Hermes, MSTP, Festip, X-38, FLPP, TRP, GSTP, HSTS, AREV, Pre-X. IXV (Intermediate eXperimental V ehicle) builds on these past experiences and studies and it is conceived to be the next technological step forward with respect to ARD With respect to previous European ballistic or quasi- ballistic demonstrators, IXV will have an increased in- flight manoeuvrability and the planned mission will allow verifying the performances of the required technologies against a wider re-entry corridor. This will imply from the pure technological aspect to increase the level of engagement on critical technologies and disciplines like aerodynamics/aerothermodynamics, guidance, navigation, control, thermal protection materials and in flight measurements. In order to support the TPS design and the other sub- systems, an AeroThermodynamicDataBase Tool has been developed by Dassault Aviation and integrated by Thales Alenia Space with the Functional Engineering Simulator (used for GNC performances evaluation) in order to characterize the aerothermodynamic behaviour of the vehicle. This paper will describe: - The methodology used to develop the ATDB tool, based on the processing of CFD computations and WTT campaigns results. - The utilization of the ATDB tool, by means of its integration into the System process. - The methodology used for the aerothermal characterization of IXV.

Experimental and simulation studies on the effect of suction opening orientation on solar vertical chimney

NASA Astrophysics Data System (ADS)

Kumar, L. Madan Ananda; Sivaramakrishnan, V.; Premalatha, M.; Vivekanandan, M.

2017-07-01

The zero energy building considered is a single storey building in Tiruchirappalli city retrofitted with various green features. This study investigated the effect of a suction opening orientation on a vertical solar chimney (VSC), integrated into a one-storey building. It was designed, manufactured and tested through selection of different suction openings for the entry of air, including right, left, front, back, both right and left and both front and back sides. Genetic algorithm (GA) calculates maximum air flow rate for a building with VSC for better suction opening, in Tiruchirappalli's dry, environmental conditions. GA is a useful technique for finding an improved suction opening specifically in the presence of a host of independent parameters which are large. The obtained results are related to fluid flow temperature distribution along the chimney, mass flow rate and air change per hour. The findings between the GA and the experimental results show sound agreement.

The control of manual entry accuracy in management/engineering information systems, phase 1

NASA Technical Reports Server (NTRS)

Hays, Daniel; Nocke, Henry; Wilson, Harold; Woo, John, Jr.; Woo, June

1987-01-01

It was shown that clerical personnel can be tested for proofreading performance under simulated industrial conditions. A statistical study showed that errors in proofreading follow an extreme value probability theory. The study showed that innovative man/machine interfaces can be developed to improve and control accuracy during data entry.

77 FR 76456 - Application(s) for Duty-Free Entry of Scientific Instruments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

... reach, x-ray beams with controllable polarization, and ``pump'' pulses over a vastly extended range of... project's ray probe pulses with controllable inter-pulse time delay. Justification for Duty-Free Entry... undergoes a metal to insulator transition when the LAO thickness is greater than 3 unit cells. The unique...

77 FR 23538 - Announcement of Entry Into Force of the Defense Trade Cooperation Treaty Between the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-19

... Trade Controls Policy, Directorate of Defense Trade Controls, Bureau of Political-Military Affairs, U.S... Assistant Secretary, Defense Trade and Regional Security, Bureau of Political-Military Affairs, U.S... DEPARTMENT OF STATE [Public Notice 7851] RIN 1400-AC95 Announcement of Entry Into Force of the...

22 CFR 62.12 - Control of Forms DS-2019.

Code of Federal Regulations, 2010 CFR

2010-04-01

... transfer; (4) Replace a lost or stolen Form DS-2019; (5) Facilitate entry of an exchange visitor's alien spouse or minor unmarried children into the United States separately; (6) Facilitate re-entry of an... Form DS-2019. Issue the Form DS-2019 only so as to: (1) Facilitate the entry of a new participant of...

22 CFR 62.12 - Control of Forms DS-2019.

Code of Federal Regulations, 2013 CFR

2013-04-01

... transfer; (4) Replace a lost or stolen Form DS-2019; (5) Facilitate entry of an exchange visitor's alien spouse or minor unmarried children into the United States separately; (6) Facilitate re-entry of an... Form DS-2019. Issue the Form DS-2019 only so as to: (1) Facilitate the entry of a new participant of...

22 CFR 62.12 - Control of Forms DS-2019.

Code of Federal Regulations, 2011 CFR

2011-04-01

... transfer; (4) Replace a lost or stolen Form DS-2019; (5) Facilitate entry of an exchange visitor's alien spouse or minor unmarried children into the United States separately; (6) Facilitate re-entry of an... Form DS-2019. Issue the Form DS-2019 only so as to: (1) Facilitate the entry of a new participant of...

22 CFR 62.12 - Control of Forms DS-2019.

Code of Federal Regulations, 2014 CFR

2014-04-01

... transfer; (4) Replace a lost or stolen Form DS-2019; (5) Facilitate entry of an exchange visitor's alien spouse or minor unmarried children into the United States separately; (6) Facilitate re-entry of an... Form DS-2019. Issue the Form DS-2019 only so as to: (1) Facilitate the entry of a new participant of...

22 CFR 62.12 - Control of Forms DS-2019.

Code of Federal Regulations, 2012 CFR

2012-04-01

... transfer; (4) Replace a lost or stolen Form DS-2019; (5) Facilitate entry of an exchange visitor's alien spouse or minor unmarried children into the United States separately; (6) Facilitate re-entry of an... Form DS-2019. Issue the Form DS-2019 only so as to: (1) Facilitate the entry of a new participant of...

Public Risk Assessment of Off-Nominal Genesis Entries

NASA Technical Reports Server (NTRS)

Mendeck, Gavin F.; Kadwa, Binaifer

2006-01-01

Public risk estimations were among the preparations for the entry of the Genesis sample return capsule. Personnel at the Johnson Space Center were requested to provide estimates of the public risk of off-nominal entries. These scenarios dealt with an incomplete trajectory maneuver that would result in the capsule landing outside of the controlled Utah Test and Training Range. Using a conservative approach to the inputs and assumptions, such off-nominal entries were demonstrated to fall within the project risk limits.

Adjustable Bracket For Entry Of Welding Wire

NASA Technical Reports Server (NTRS)

Gilbert, Jeffrey L.; Gutow, David A.

1993-01-01

Wire-entry bracket on welding torch in robotic welding system provides for adjustment of angle of entry of welding wire over range of plus or minus 30 degrees from nominal entry angle. Wire positioned so it does not hide weld joint in view of through-the-torch computer-vision system part of robot-controlling and -monitoring system. Swiveling bracket also used on nonvision torch on which wire-feed-through tube interferes with workpiece. Angle simply changed to one giving sufficient clearance.

Dynamic and Static High Temperature Resistant Ceramic Seals for X- 38 re-Entry Vehicle

NASA Astrophysics Data System (ADS)

Handrick, Karin E.; Curry, Donald M.

2002-01-01

In a highly successful partnership, NAS A, ESA, DLR (German Space Agency) and European industry are building the X-38, V201 re-entry spacecraft, the prototype of the International Space Station's Crew Return Vehicle (CRV). This vehicle would serve both as an ambulance for medical emergencies and as an evacuation vehicle for the Space Station. The development of essential systems and technologies for a reusable re-entry vehicle is a first for Europe, and sharing the development of an advanced re-entry spacecraft with foreign partners is a first for NASA. NASA, in addition to its subsystem responsibilities, is performing overall X-38 vehicle system engineering and integration, will launch V201 on the Space Shuttle, deliver flight data for post-flight analysis and assessment and is responsible for development and manufacture of structural vehicle components and thermal protection (TPS) tiles. The major European objective for cooperation with NASA on X-38 was to establish a clear path through which key technologies needed for future space transportation systems could be developed and validated at affordable cost and with controlled risk. Europe has taken the responsibility to design and manufacture hot control surfaces like metallic rudders and ceramic matrix composites (CMC) body flaps, thermal protection systems such as CMC leading edges, the CMC nose cap and -skirt, insulation, landing gears and elements of the V201 primary structure. Especially hot control surfaces require extremely high temperature resistant seals to limit hot gas ingestion and transfer of heat to underlying low-temperature structures to prevent overheating of these structures and possible loss of the vehicle. Complex seal interfaces, which have to fulfill various, tight mission- and vehicle-related requirements exist between the moveable ceramic body flaps and the bottom surface of the vehicle, between the rudder and fin structure and the ceramic leading edge panel and TPS tiles. While NASA concentrated on the development, qualification and manufacture of dynamic seals in the rudder area, the responsibility of MAN Technologie focused on the development, lay-out, qualification and flight hardware manufacture of static and dynamic seals in ceramic hot structures' associated gaps and interfaces, dealing with re-entry temperatures up to 1600°C. This paper presents results for temperature and mechanical stability, flow, scrub (up to 1000 cycles) and of arc jet tests under representative low boundary conditions and plasma step/gap tests, conducted during the development and qualification phases of these different kind of ceramic seals. Room temperature seal compression tests were performed at low compression levels to determine load versus linear compression, preload, contact area, stiffness and resiliency characteristics under low load conditions. Flow tests with thermally aged seals were conducted at ambient temperature to examine leakage at low compression levels and in as-manufactured conditions. Seal scrub tests were performed to examine durability and wear resistance and to recommend surface treatments required to maximize seal wear life. Results of arc jet/plasma tests under simulated re-entry conditions (pressure, temperature) verified seal temperature stability and function under representative assembly and interface conditions. Each of these specifically developed seals fulfilled the requirements and is qualified for flight on X-38, V201.

Aerobic Exercise As a Potential Way to Improve Self-Control after Ego-Depletion in Healthy Female College Students.

PubMed

Zou, Zhiling; Liu, Yang; Xie, Jing; Huang, Xiting

2016-01-01

To test whether aerobic exercise can help build self-control stamina in healthy female young adults. Stamina in this context is defined as the capability to endure ego depletion, which can be measured with a self-control task following another activity also requiring self-control. Forty-five healthy undergraduate women were randomized to either an experimental group or control group. Participants in the experimental group were required to run in their campus running field for 30 min for a period of 5 weeks. Individuals in the control group were required to do diary entries regarding self-control in their daily lives, also for a period of 5 weeks. Before and after the 5-week intervention, participants completed a pain threshold test, a color word Stroop task and the following Cold Pressor Task (CPT) (with and without a distraction component). There was significant decrease of pain tolerance in session 2 relative to session 1 in the control group, but no such decline was found in the experimental group (though the improvement of pain tolerance was not significant), possibly suggesting successful self-control against this kind of decline. Five weeks of aerobic exercise increased self-control after ego depletion in terms of pain tolerance. These findings suggest that aerobic exercise may serve as a potential effective intervention for enhancing self-control in a college female population.

ProSens: integrated production control by automated inspection planning and efficient multisensor metrology

NASA Astrophysics Data System (ADS)

Glaser, Ulf; Li, Zhichao; Bichmann, Stephan, II; Pfeifer, Tilo

2003-05-01

By China's entry into the WTO, Chinese as well as German companies are facing the question, how to minimize the risk of unfamiliar cooperation partners when developing products. The rise of customer demands concerning quality, product diversity and the reduction of expenses require flexibility and efficiency with reliable component suppliers. In order to build and strengthen sino-german cooperations, a manufacturing control using homogenized and efficient measures to assure high quality is of vital importance. Lack of unifications may cause identical measurements conducted at subcontractors or customers to be carried out with different measurement processes which leads to incomparable results. Rapidly growing company cooperations and simultaneously decreasing of manufacturing scope cause substantial difficulties when coordinating joint quality control activities. "ProSens," a sino-german project consortium consisting of industrial users, technology producers and research institutes, aims at improving selected production processes by: Creation of a homogeneous quality awareness in sino-german cooperations. Sensitization for process accompanying metrology at an early stage of product development. Increase of the process performance by the use of integrated metrology. Reduction of production time and cost. Unification of quality control of complex products by means of efficient measurement strategies and CAD-based inspection planning.

Space Shuttle third flight /STS-3/ entry RCS analysis. [Reaction Control System

NASA Technical Reports Server (NTRS)

Scallion, W. I.; Compton, H. R.; Suit, W. T.; Powell, R. W.; Blackstock, T. A.; Bates, B. L.

1983-01-01

Flight data obtained from three Space Transportation System orbiter entries (STS-1, 2, and 3) are processed and analyzed to determine the roll interactions caused by the firing of the entry reaction control system (RCS). Comparisons between the flight-derived parameters and the predicted derivatives without interaction effects are made. The flight-derived RCS Plume flow-field interaction effects are independently deduced by direct integration of the incremental changes in the wing upper surface pressures induced by RCS side thruster firings. The separately obtained interaction effects are compared to the predicted values and the differences are discussed.

STS-92 Mission Specialist Chiao has his launch and entry suit adjusted

NASA Technical Reports Server (NTRS)

2000-01-01

In the Operations and Checkout Building, STS-92 Mission Specialist Leroy Chiao has his launch and entry suit adjusted during fit check. Chiao and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be Chiao's third Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program.

Analytic Development of a Reference Profile for the First Entry in a Skip Atmospheric Entry

NASA Technical Reports Server (NTRS)

Garcia-Llama, Eduardo

2010-01-01

This note shows that a feasible reference drag profile for the first entry portion of a skip entry can be generated as a polynomial expression of the velocity. The coefficients of that polynomial are found through the resolution of a system composed of m + 1 equations, where m is the degree of the drag polynomial. It has been shown that a minimum of five equations (m = 4) are required to establish the range and the initial and final conditions on velocity and flight path angle. It has been shown that at least one constraint on the trajectory can be imposed through the addition of one extra equation in the system, which must be accompanied by the increase in the degree of the drag polynomial. In order to simplify the resolution of the system of equations, the drag was considered as being a probability density function of the velocity, with the velocity as a distribution function of the drag. Combining this notion with the introduction of empirically derived constants, it has been shown that the system of equations required to generate the drag profile can be successfully reduced to a system of linear algebraic equations. For completeness, the resulting drag profiles have been flown using the feedback linearization method of differential geometric control as a guidance law with the error dynamics of a second order homogeneous equation in the form of a damped oscillator. Satisfactory results were achieved when the gains in the error dynamics were changed at a certain point along the trajectory that is dependent on the velocity and the curvature of the drag as a function of the velocity. Future work should study the capacity to update the drag profile in flight when dispersions are introduced. Also, future studies should attempt to link the first entry, as presented and controlled in this note, with a more standard control concept for the second entry, such as the Apollo entry guidance, to try to assess the overall skip entry performance. A guidance law that includes an integral feedback term, as is the case in the actual Space Shuttle entry guidance and as is proposed in Ref 29, could be tried in future studies to assess whether its use results in an improvement of the tracking performance, and to evaluate the design needs when determining the control gains.

77 FR 41973 - Record of Decision for the Entry Control Reconfiguration and Base Perimeter Fence Relocation in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

... Reconfiguration and Base Perimeter Fence Relocation in area A Wright-Patterson AF Base, Ohio, Final Environmental..., 2012, the United States Air Force signed the ROD for the Entry Control Reconfiguration and Base Perimeter Fence Relocation in Area A Wright-Patterson Air Force Base (WPAFB), Ohio Final Environmental...

Inhibitors of SARS-CoV Entry - Identification using an Internally-Controlled Dual Envelope Pseudovirion Assay

PubMed Central

Zhou, Yanchen; Agudelo, Juliet; Lu, Kai; Goetz, David H.; Hansell, Elizabeth; Chen, Yen Ting; Roush, William R.; McKerrow, James; Craik, Charles S.; Amberg, Sean M.; Simmons, Graham

2011-01-01

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) emerged as the causal agent of an endemic atypical pneumonia, infecting thousands of people worldwide. Although a number of promising potential vaccines and therapeutic agents for SARS-CoV have been described, no effective antiviral drug against SARS-CoV is currently available. The intricate, sequential nature of the viral entry process provides multiple valid targets for drug development. Here, we describe a rapid and safe cell-based high-throughput screening system, Dual Envelope Pseudovirion (DEP) Assay, for specifically screening inhibitors of viral entry. The assay system employs a novel dual envelope strategy, using lentiviral pseudovirions as targets whose entry is driven by the SARS-CoV Spike glycoprotein. A second, unrelated viral envelope is used as an internal control to reduce the number of false positives. As an example of the power of this assay a class of inhibitors is reported with the potential to inhibit SARS-CoV at two steps of the replication cycle, viral entry and particle assembly. This assay system can be easily adapted to screen entry inhibitors against other viruses with the careful selection of matching partner virus envelopes. PMID:21820471

A randomized controlled trial of interim methadone maintenance.

PubMed

Schwartz, Robert P; Highfield, David A; Jaffe, Jerome H; Brady, Joseph V; Butler, Carol B; Rouse, Charles O; Callaman, Jason M; O'Grady, Kevin E; Battjes, Robert J

2006-01-01

Effective alternatives to long waiting lists for entry into methadone hydrochloride maintenance treatment are needed to reduce the complications of continuing heroin dependence and to increase methadone treatment entry. To compare the effectiveness of interim methadone maintenance with that of the usual waiting list condition in facilitating methadone treatment entry and reducing heroin and cocaine use and criminal behavior. Randomized, controlled, clinical trial using 2 conditions, with treatment assignment on a 3:2 basis to interim maintenance-waiting list control. A methadone treatment program in Baltimore. A total of 319 individuals meeting the criteria for current heroin dependence and methadone maintenance treatment. Participants were randomly assigned to either interim methadone maintenance, consisting of an individually determined methadone dose and emergency counseling only for up to 120 days, or referral to community-based methadone treatment programs. Entry into comprehensive methadone maintenance therapy at 4 months from baseline; self-reported days of heroin use, cocaine use, and criminal behavior; and number of urine drug test results positive for heroin and cocaine at the follow-up interview conducted at time of entry into comprehensive methadone treatment (or at 4 months from baseline for participants who did not enter regular treatment). Significantly more participants assigned to the interim methadone maintenance condition entered comprehensive methadone maintenance treatment by the 120th day from baseline (75.9%) than those assigned to the waiting list control condition (20.8%) (P<.001). Overall, in the past 30 days at follow-up, interim participants reported significantly fewer days of heroin use (P<.001), had a significant reduction in heroin-positive drug test results (P<.001), reported spending less money on drugs (P<.001), and received less illegal income (P<.02) than the waiting list participants. Interim methadone maintenance results in a substantial increase in the likelihood of entry into comprehensive treatment, and is an effective means of reducing heroin use and criminal behavior among opioid-dependent individuals awaiting entry into a comprehensive methadone treatment program.

STS-118 Ascent/Entry Flight Control Team in WFCR

NASA Image and Video Library

2007-09-17

JSC2007-E-46429 (17 Sept. 2007) --- The members of the STS-118 Ascent/Entry flight control team and crewmembers pose for a group portrait in the space shuttle flight control room of Houston's Mission Control Center (MCC). Flight director Steve Stich holds the STS-118 mission logo. Astronauts Scott Kelly, commander, is at left foreground and astronaut Chris Ferguson, spacecraft communicator (CAPCOM), is at right foreground. Additional crewmembers pictured are Charlie Hobaugh, pilot; Barbara R. Morgan, Tracy Caldwell and Rick Mastracchio, all mission specialists.

Optogenetic manipulation of anatomical re-entry by light-guided generation of a reversible local conduction block.

PubMed

Watanabe, Masaya; Feola, Iolanda; Majumder, Rupamanjari; Jangsangthong, Wanchana; Teplenin, Alexander S; Ypey, Dirk L; Schalij, Martin J; Zeppenfeld, Katja; de Vries, Antoine A F; Pijnappels, Daniël A

2017-03-01

Anatomical re-entry is an important mechanism of ventricular tachycardia, characterized by circular electrical propagation in a fixed pathway. It's current investigative and therapeutic approaches are non-biological, rather unspecific (drugs), traumatizing (electrical shocks), or irreversible (ablation). Optogenetics is a new biological technique that allows reversible modulation of electrical function with unmatched spatiotemporal precision using light-gated ion channels. We therefore investigated optogenetic manipulation of anatomical re-entry in ventricular cardiac tissue. Transverse, 150-μm-thick ventricular slices, obtained from neonatal rat hearts, were genetically modified with lentiviral vectors encoding Ca2+-translocating channelrhodopsin (CatCh), a light-gated depolarizing ion channel, or enhanced yellow fluorescent protein (eYFP) as control. Stable anatomical re-entry was induced in both experimental groups. Activation of CatCh was precisely controlled by 470-nm patterned illumination, while the effects on anatomical re-entry were studied by optical voltage mapping. Regional illumination in the pathway of anatomical re-entry resulted in termination of arrhythmic activity only in CatCh-expressing slices by establishing a local and reversible, depolarization-induced conduction block in the illuminated area. Systematic adjustment of the size of the light-exposed area in the re-entrant pathway revealed that re-entry could be terminated by either wave collision or extinction, depending on the depth (transmurality) of illumination. In silico studies implicated source-sink mismatches at the site of subtransmural conduction block as an important factor in re-entry termination. Anatomical re-entry in ventricular tissue can be manipulated by optogenetic induction of a local and reversible conduction block in the re-entrant pathway, allowing effective re-entry termination. These results provide distinctively new mechanistic insight into re-entry termination and a novel perspective for cardiac arrhythmia management. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions, please email: journals.permissions@oup.com.

Reading Aloud, Play, and Social-Emotional Development.

PubMed

Mendelsohn, Alan L; Cates, Carolyn Brockmeyer; Weisleder, Adriana; Berkule Johnson, Samantha; Seery, Anne M; Canfield, Caitlin F; Huberman, Harris S; Dreyer, Benard P

2018-05-01

To determine impacts on social-emotional development at school entry of a pediatric primary care intervention (Video Interaction Project [VIP]) promoting positive parenting through reading aloud and play, delivered in 2 phases: infant through toddler (VIP birth to 3 years [VIP 0-3]) and preschool-age (VIP 3 to 5 years [VIP 3-5]). Factorial randomized controlled trial with postpartum enrollment and random assignment to VIP 0-3, control 0 to 3 years, and a third group without school entry follow-up (Building Blocks) and 3-year second random assignment of VIP 0-3 and control 0 to 3 years to VIP 3-5 or control 3 to 5 years. In the VIP, a bilingual facilitator video recorded the parent and child reading and/or playing using provided learning materials and reviewed videos to reinforce positive interactions. Social-emotional development at 4.5 years was assessed by parent-report Behavior Assessment System for Children, Second Edition (Social Skills, Attention Problems, Hyperactivity, Aggression, Externalizing Problems). VIP 0-3 and VIP 3-5 were independently associated with improved 4.5-year Behavior Assessment System for Children, Second Edition T-scores, with effect sizes (Cohen's d) ∼-0.25 to -0.30. Receipt of combined VIP 0-3 and VIP 3-5 was associated with d = -0.63 reduction in Hyperactivity ( P = .001). VIP 0-3 resulted in reduced "Clinically Significant" Hyperactivity (relative risk reduction for overall sample: 69.2%; P = .03; relative risk reduction for increased psychosocial risk: 100%; P = .006). Multilevel models revealed significant VIP 0-3 linear effects and age × VIP 3-5 interactions. Phase VIP 0-3 resulted in sustained impacts on behavior problems 1.5 years after program completion. VIP 3-5 had additional, independent impacts. With our findings, we support the use of pediatric primary care to promote reading aloud and play from birth to 5 years, and the potential for such programs to enhance social-emotional development. Copyright © 2018 by the American Academy of Pediatrics.

Enhancing Building, Conversation, and Learning through Caregiver-Child Interactions in a Children's Museum

ERIC Educational Resources Information Center

Benjamin, Nora; Haden, Catherine A.; Wilkerson, Erin

2010-01-01

The authors adapted an experimental design to examine effects of instruction prior to entry into a children's museum exhibit on caregiver-child interactions and children's learning. One hundred twenty-one children (mean age = 6.6 years) and their caregivers were randomly assigned to 1 of 5 conditions that varied according to what, if any,…

Making an Educational Innovation Stick: Building State Networks to Support Experience-Based Career Education.

ERIC Educational Resources Information Center

Bridgeford, Nancy; Douglas, Marcia

A study assessed the activities of five state networks that were designed to transfer experience-based career education (EBCE) ownership to appropriate state and local institutions and to develop a state-level support system for continued implementation of EBCE in local districts. Focus of the analysis was on factors contributing to EBCE entry,…

75 FR 57061 - Public Land Order No. 7749; Extension of Public Land Order Nos. 6801 and 6812; Arizona

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... National Forest System lands from location or entry under the United States mining laws (30 U.S.C. chapter... Service Coronado National Forest Office, Federal Building, 300 West Congress Street, Tucson, Arizona 85701.... Public Land Order No. 6801 (55 FR 38550, (1990)) that withdrew 61.356 acres of National Forest System...

KSC-06pd2224

NASA Image and Video Library

2006-09-26

KENNEDY SPACE CENTER, FLA. - Inside the Operations and Checkout Building, Center Director Jim Kennedy (second from right) joins workers and officials after the ceremony that reactivated the entry into this crew exploration vehicle (CEV) environment. During the rest of the decade, KSC will transition from launching space shuttles to launching new vehicles in NASA’s Vision For Space Exploration. Photo credit: NASA/Kim Shiflett

Status of Sample Return Propulsion Technology Development Under NASA's ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Glaab, Louis J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Peterson, Todd T.

2012-01-01

The In-Space Propulsion Technology (ISPT) program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. ISPT s sample return technology development areas are diverse. Sample Return Propulsion (SRP) addresses electric propulsion for sample return and low cost Discovery-class missions, propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and low technology readiness level (TRL) advanced propulsion technologies. The SRP effort continues work on HIVHAC thruster development to transition into developing a Hall-effect propulsion system for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks continues for sample return with direct applicability to a Mars Sample Return (MSR) mission with general applicability to all future planetary spacecraft. The Earth Entry Vehicle (EEV) work focuses on building a fundamental base of multi-mission technologies for Earth Entry Vehicles (MMEEV). The main focus of the Planetary Ascent Vehicles (PAV) area is technology development for the Mars Ascent Vehicle (MAV), which builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies

Bottom-Up Gazetteers: Learning from the Implicit Semantics of Geotags

NASA Astrophysics Data System (ADS)

Keßler, Carsten; Maué, Patrick; Heuer, Jan Torben; Bartoschek, Thomas

As directories of named places, gazetteers link the names to geographic footprints and place types. Most existing gazetteers are managed strictly top-down: entries can only be added or changed by the responsible toponymic authority. The covered vocabulary is therefore often limited to an administrative view on places, using only official place names. In this paper, we propose a bottom-up approach for gazetteer building based on geotagged photos harvested from the web. We discuss the building blocks of a geotag and how they relate to each other to formally define the notion of a geotag. Based on this formalization, we introduce an extraction process for gazetteer entries that captures the emergent semantics of collections of geotagged photos and provides a group-cognitive perspective on named places. Using an experimental setup based on clustering and filtering algorithms, we demonstrate how to identify place names and assign adequate geographic footprints. The results for three different place names (Soho, Camino de Santiago and Kilimanjaro), representing different geographic feature types, are evaluated and compared to the results obtained from traditional gazetteers. Finally, we sketch how our approach can be combined with other (for example, linguistic) approaches and discuss how such a bottom-up gazetteer can complement existing gazetteers.

Open hardware: a role to play in wireless sensor networks?

PubMed

Fisher, Roy; Ledwaba, Lehlogonolo; Hancke, Gerhard; Kruger, Carel

2015-03-20

The concept of the Internet of Things is rapidly becoming a reality, with many applications being deployed within industrial and consumer sectors. At the 'thing' level-devices and inter-device network communication-the core technical building blocks are generally the same as those found in wireless sensor network implementations. For the Internet of Things to continue growing, we need more plentiful resources for building intelligent devices and sensor networks. Unfortunately, current commercial devices, e.g., sensor nodes and network gateways, tend to be expensive and proprietary, which presents a barrier to entry and arguably slows down further development. There are, however, an increasing number of open embedded platforms available and also a wide selection of off-the-shelf components that can quickly and easily be built into device and network gateway solutions. The question is whether these solutions measure up to built-for-purpose devices. In the paper, we provide a comparison of existing built-for-purpose devices against open source devices. For comparison, we have also designed and rapidly prototyped a sensor node based on off-the-shelf components. We show that these devices compare favorably to built-for-purpose devices in terms of performance, power and cost. Using open platforms and off-the-shelf components would allow more developers to build intelligent devices and sensor networks, which could result in a better overall development ecosystem, lower barriers to entry and rapid growth in the number of IoT applications.

Open Hardware: A Role to Play in Wireless Sensor Networks?

PubMed Central

Fisher, Roy; Ledwaba, Lehlogonolo; Hancke, Gerhard; Kruger, Carel

2015-01-01

The concept of the Internet of Things is rapidly becoming a reality, with many applications being deployed within industrial and consumer sectors. At the ‘thing’ level—devices and inter-device network communication—the core technical building blocks are generally the same as those found in wireless sensor network implementations. For the Internet of Things to continue growing, we need more plentiful resources for building intelligent devices and sensor networks. Unfortunately, current commercial devices, e.g., sensor nodes and network gateways, tend to be expensive and proprietary, which presents a barrier to entry and arguably slows down further development. There are, however, an increasing number of open embedded platforms available and also a wide selection of off-the-shelf components that can quickly and easily be built into device and network gateway solutions. The question is whether these solutions measure up to built-for-purpose devices. In the paper, we provide a comparison of existing built-for-purpose devices against open source devices. For comparison, we have also designed and rapidly prototyped a sensor node based on off-the-shelf components. We show that these devices compare favorably to built-for-purpose devices in terms of performance, power and cost. Using open platforms and off-the-shelf components would allow more developers to build intelligent devices and sensor networks, which could result in a better overall development ecosystem, lower barriers to entry and rapid growth in the number of IoT applications. PMID:25803706

Is season of birth related to developmental dyslexia?

PubMed

Donfrancesco, Renato; Iozzino, Roberto; Caruso, Barbara; Ferrante, Laura; Mugnaini, Daniele; Talamo, Alessandra; Miano, Silvia; Dimitri, Andrea; Masi, Gabriele

2010-12-01

Different moderators/mediators of risk are involved in developmental dyslexia (DD), but data are inconsistent. We explored the prevalence of season of birth and its association with gender and age of school entry in an Italian sample of dyslexic children compared to an Italian normal control group. The clinical sample included 498 children (345 boys, mean age 10.3 ± 2.1 years) with DD, the control sample 1,276 children (658 boys, mean age 10.8 ± 2.2 years) from four elementary schools from the same urban area, and with the same socio-economic status level. A prevalence of birth in autumn was found among children with DD compared to controls (34% versus 24%, p < 0.0001). Children with DD were more frequently males (p < 0.0001) and had a lower mean age of school entry (p < 0.0001). Regarding the distribution of ages, 11.4% of children with DD, but none of the subjects in the control group, started school before 5.7 years. Therefore, greater risk of DD was related to age of school entry (OR = 2.72), gender (OR = 2.16), and season of birth (OR = 1.21). Significant interactions between boys with DD born in autumn, and correct school of entry (OR = 2.56) were joint predictors of higher risk of DD. The association between birth in autumn and DD may be explained by the earlier age of school entry, which may be a critical element in the youngest children with DD or at risk to DD. Whether Italian school policy is oriented to anticipate the school entry, a closer detection of early learning disorders and associated risk factors (familial load, specific language disorders, and attention deficit hyperactivity disorder) should be warranted.

FLPP IXV Re-entry Vehicle, Transonic Characterisation Based on FOI T1500 Wind Tunnel Tests and CFD

NASA Astrophysics Data System (ADS)

Torngren, L.; Chiarelli, C.; Mareschi, V.; Tribot, J.-P.; Binetti, P.; Walloschek, T.

2009-01-01

The European Space Agency ESA, has engaged in 2004, the IXV project (Intermediate eXperimental Vehicle) which is part of the FLPP (Future Launcher Preparatory Programme) aiming at answering to critical technological issues, while supporting the future generation launchers and to improve in general European capabilities in the strategic field of atmospheric re-entry for space transportation, exploration and scientific applications. The IXV key mission and system objectives are the design, development, manufacturing, assembling and on-ground to in-flight verification of an autonomous European lifting and aerodynamically controlled re-entry system, integrating the critical re-entry technologies at the system level. The current IXV vehicle is a slender body type exhibiting rounded shape, thick body controlled by means of two control surfaces. The current mission is to perform an atmospheric re- entry ended by a safe recovery in supersonic regime. A potential extension of the flight domain down to the transonic regime was proposed to be analyzed. The objectives were to study the capability of the IXV for flying autonomously enabling a recovery of the vehicle by means of a subsonic parachute based DRS. The vehicle designed for the hypersonic speeds integrating a large base with only two control surfaces located close to the plane of symmetry is definitively not tuned for transonic ones. CFD done by Thales Alenia Space and wind tunnel activities involving FOI T1500 facility contributed to built up an Aerodynamic Data Base (AEDB) to be used as inputs for flying qualities analysis and re-entry simulations. The paper presents the main objectives of the transonic activities with emphasis on CFD and WTT including a description of the different prediction tools and discussing the main outcomes of the current data comparisons.

STS-114: Discovery Day 13 Mission Status Briefing

NASA Technical Reports Server (NTRS)

2005-01-01

LeRoy Cain, STS-114 Ascent/Entry Flight Director, takes a solo stand with the Press in this briefing. He reports that the vehicle is in good shape, consumable status is excellent, and the shuttle crew is in high spirits and preparing for de-orbit and landing. LeRoy and his team have completed the entry system check up, flight control check up, reactor control system check up, and noted that all are at nominal performance; weather forecast is very good, the Entry team is ready and looking forward to de-orbit and landing at the Kennedy Space Center on Monday, August 8th. Re-entry, personal feelings, Columbia accident, data gathering, consumable situation, back up sites, weather, communication block out, night and day landing, and Commander Collin's piloting skills during night flight are some of the topics covered with the News media.

Acute amiodarone promotes drift and early termination of spiral wave re-entry.

PubMed

Nakagawa, Harumichi; Honjo, Haruo; Ishiguro, Yuko S; Yamazaki, Masatoshi; Okuno, Yusuke; Harada, Masahide; Takanari, Hiroki; Sakuma, Ichiro; Kamiya, Kaichiro; Kodama, Itsuo

2010-07-01

Intravenous application of amiodarone is commonly used in the treatment of life-threatening arrhythmias, but the underlying mechanism is not fully understood. The purpose of the present study is to investigate the acute effects of amiodarone on spiral wave (SW) re-entry, the primary organization machinery of ventricular tachycardia/fibrillation (VT/VF), in comparison with lidocaine. A two-dimensional ventricular myocardial layer was obtained from 24 Langendorff-perfused rabbit hearts, and epicardial excitations were analyzed by high-resolution optical mapping. During basic stimulation, amiodarone (5 microM) caused prolongation of action potential duration (APD) by 5.6%-9.1%, whereas lidocaine (15 microM) caused APD shortening by 5.0%-6.4%. Amiodarone and lidocaine reduced conduction velocity similarly. Ventricular tachycardias induced by DC stimulation in the presence of amiodarone were of shorter duration (sustained-VTs >30 s/total VTs: 2/58, amiodarone vs 13/52, control), whereas those with lidocaine were of longer duration (22/73, lidocaine vs 14/58, control). Amiodarone caused prolongation of VT cycle length and destabilization of SW re-entry, which is characterized by marked prolongation of functional block lines, frequent wavefront-tail interactions near the rotation center, and considerable drift, leading to its early annihilation via collision with anatomical boundaries. Spiral wave re-entry in the presence of lidocaine was more stabilized than in control. In the anisotropic ventricular myocardium, amiodarone destabilizes SW re-entry facilitating its early termination. Lidocaine, in contrast, stabilizes SW re-entry resulting in its persistence.

A Survey of the Rapidly Emerging Field of Nanotechnology: Potential Applications for Scientific Instruments and Technologies for Atmospheric Entry Probes

NASA Technical Reports Server (NTRS)

Meyyappan, M.; Arnold, J. O.

2005-01-01

The field of Nanotechnology is well funded worldwide and innovations applicable to Solar System Exploration are emerging much more rapidly than thought possible just a few years ago. This presentation will survey recent innovations from nanotechnololgy with a focus on novel applications to atmospheric entry science and probe technology, in a fashion similar to that presented by Arnold and Venkatapathy at the previous workshop forum at Lisbon Portugal, October 6-9, 2003. Nanotechnology is a rapidly emerging field that builds systems, devices and materials from the bottom up, atom by atom, and in so doing provides them with novel and remarkable macro-scale performance. This technology has the potential to revolutionize space exploration by reducing mass and simultaneously increasing capability. Thermal, Radiation, Impact Protective Shields: Atmospheric probes and humans on long duration deep space missions involved in Solar System Exploration must safely endure 3 significant hazards: (i) atmospheric entry; (ii) radiation; and (iii) micrometeorite or debris impact. Nanostructured materials could be developed to address all three hazards with a single protective shield, which would involve much less mass than a traditional approach. The concept can be ready in time for incorporation into NASA s Crew Exploration Vehicle, and possible entry probes to fly on the Jupiter Icy Moons

4. View toward north, south face ("C" wall) of perimeter ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. View toward north, south face ("C" wall) of perimeter acquisition radar building showing entry (former docking facility) on left, behind satellite dish. On the bottom right can be seen the knockout panel provided for a future tunnel that was never used. The two "holes" above are referred to as bird screens, the upper air intake, on the fifth level, incorporates a plenium chamber (#510e), as does the lower (#2M8A) air exhaust, located on the second level mezzanine - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND

SHEFEX II - Aerodynamic Re-Entry Controlled Sharp Edge Flight Experiment

NASA Astrophysics Data System (ADS)

Longo, J. M. A.; Turner, J.; Weihs, H.

2009-01-01

In this paper the basic goals and architecture of the SHEFEX II mission is presented. Also launched by a two staged sounding rocket system SHEFEX II is a consequent next step in technology test and demonstration. Considering all experience and collected flight data obtained during the SHEFEX I Mission, the test vehicle has been re-designed and extended by an active control system, which allows active aerodynamic control during the re-entry phase. Thus, ceramic based aerodynamic control elements like rudders, ailerons and flaps, mechanical actuators and an automatic electronic control unit has been implemented. Special focus is taken on improved GNC Elements. In addition, some other experiments including an actively cooled thermal protection element, advanced sensor equipment, high temperature antenna inserts etc. are part of the SHEFEX II experimental payload. A final 2 stage configuration has been selected considering Brazilian solid rocket boosters derived from the S 40 family. During the experiment phase a maximum entry velocity of Mach around 10 is expected for 50 seconds. Considering these flight conditions, the heat loads are not representative for a RLV re-entry, however, it allows to investigate the principal behaviour of such a facetted ceramic TPS, a sharp leading edge at the canards and fins and all associated gas flow effects and their structural response.

14 CFR Appendix B to Part 187 - Fees for FAA Services for Certain Flights

Code of Federal Regulations, 2010 CFR

2010-01-01

....-controlled airspace.) Distance flown is based on the great circle distance (GCD) for the point of entry and the point of exit of U.S.-controlled airspace based on FAA flight data. Fees are assessed using the methodology presented in paragraph (e)(2) of this appendix. Where actual entry and exit points are not...

Six-degree-of-freedom guidance and control-entry analysis of the HL-20

NASA Technical Reports Server (NTRS)

Powell, Richard W.

1993-01-01

The ability of the HL-20 lifting body to fly has been evaluated for an automated entry from atmospheric interface to landing. This evaluation was required to demonstrate that not only successful touchdown conditions would be possible for this low lift-to-drag-ratio vehicle, but also the vehicle would not exceed its design dynamic pressure limit of 400 psf during entry. This dynamic pressure constraint limit, coupled with limited available pitch-control authority at low supersonic speeds, restricts the available maneuvering capability for the HL-20 to acquire the runway. One result of this analysis was that this restrictive maneuvering capability does not allow the use of a model-following atmospheric entry-guidance algorithm, such as that used by the Space Shuttle, but instead requires a more adaptable guidance algorithm. Therefore, for this analysis, a predictor-corrector guidance algorithm was developed that would provide successful touchdown conditions while not violating the dynamic pressure constraint. A flight-control system was designed and incorporated, along with the predictor-corrector guidance algorithm, into a six-DOF simulation. which showed that the HL-20 remained controllable and could reach the landing site and execute a successful landing under all off-nominal conditions simulated.

Developing Community Reinforcement and Family Training (CRAFT) for Parents of Treatment-Resistant Adolescents.

PubMed

Kirby, Kimberly C; Versek, Brian; Kerwin, MaryLouise E; Meyers, Kathleen; Benishek, Lois A; Bresani, Elena; Washio, Yukiko; Arria, Amelia; Meyers, Robert J

2015-05-04

We describe a project focused on training parents to facilitate their treatment-resistant adolescent's treatment entry and to manage their child after entry into community-based treatment. Controlled studies show that Community Reinforcement and Family Training (CRAFT) is a unilateral treatment that fosters treatment entry of adults; however, there are no controlled trials for parents with a substance-abusing child. We examined the behavioral parent training literature to guide us in tailoring CRAFT for parents of adolescents. We discuss adaptations to CRAFT, outcomes and experiences gained from a brief pilot of the revised CRAFT program, and the future directions of this work.

Orion Entry Flight Control Stability and Performance

NASA Technical Reports Server (NTRS)

Strahan, Alan L.; Loe, Greg R.; Seiler, Pete

2007-01-01

The Orion Spacecraft will be required to perform entry and landing functions for both Low Earth Orbit (LEO) and Lunar return missions, utilizing only the Command Module (CM) with its unique systems and GN&C design. This paper presents the current CM Flight Control System (FCS) design to support entry and landing, with a focus on analyses that have supported its development to date. The CM FCS will have to provide for spacecraft stability and control while following guidance or manual commands during exo-atmospheric flight, after Service Module separation, translational powered flight required of the CM, atmospheric flight supporting both direct entry and skip trajectories down to drogue chute deploy, and during roll attitude reorientation just prior to touchdown. Various studies and analyses have been performed or are on-going supporting an overall FCS design with reasonably sized Reaction Control System (RCS) jets, that minimizes fuel usage, that provides appropriate command following but with reasonable stability and control margin. Results from these efforts to date are included, with particular attention on design issues that have emerged, such as the struggle to accommodate sub-sonic pitch and yaw control without using excessively large jets that could have a detrimental impact on vehicle weight. Apollo, with a similar shape, struggled with this issue as well. Outstanding CM FCS related design and analysis issues, planned for future effort, are also briefly be discussed.

Mid-Lift-to-Drag Ratio Rigid Vehicle Control System Design and Simulation for Human Mars Entry

NASA Technical Reports Server (NTRS)

Johnson, Breanna J.; Cerimele, Christopher J.; Stachowiak, Susan J.; Sostaric, Ronald R.; Matz, Daniel A.; Lu, Ping

2018-01-01

The Mid-Lift-to-Drag Ratio Rigid Vehicle (MRV) is a proposed candidate in the NASA Evolvable Mars Campaign's (EMC) Pathfinder Entry, Descent, and Landing (EDL) architecture study. The purpose of the study is to design a mission and vehicle capable of transporting a 20mt payload to the surface of Mars. The MRV is unique in its rigid, asymmetrical lifting-body shape which enables a higher lift-to-drag ratio (L/D) than the typical robotic Mars entry capsule vehicles that carry much less mass. This paper presents the formulation and six-degree-of-freedom (6DOF) performance of the MRV's control system, which uses both aerosurfaces and a propulsive reaction control system (RCS) to affect longitudinal and lateral directional behavior.

Relevance of a neurophysiological marker of attention allocation for children's learning-related behaviors and academic performance.

PubMed

Willner, Cynthia J; Gatzke-Kopp, Lisa M; Bierman, Karen L; Greenberg, Mark T; Segalowitz, Sidney J

2015-08-01

Learning-related behaviors are important for school success. Socioeconomic disadvantage confers risk for less adaptive learning-related behaviors at school entry, yet substantial variability in school readiness exists within socioeconomically disadvantaged populations. Investigation of neurophysiological systems associated with learning-related behaviors in high-risk populations could illuminate resilience processes. This study examined the relevance of a neurophysiological measure of controlled attention allocation, amplitude of the P3b event-related potential, for learning-related behaviors and academic performance in a sample of socioeconomically disadvantaged kindergarteners. The sample consisted of 239 children from an urban, low-income community, approximately half of whom exhibited behavior problems at school entry (45% aggressive/oppositional; 64% male; 69% African American, 21% Hispanic). Results revealed that higher P3b amplitudes to target stimuli in a go/no-go task were associated with more adaptive learning-related behaviors in kindergarten. Furthermore, children's learning-related behaviors in kindergarten mediated a positive indirect effect of P3b amplitude on growth in academic performance from kindergarten to 1st grade. Given that P3b amplitude reflects attention allocation processes, these findings build on the scientific justification for interventions targeting young children's attention skills in order to promote effective learning-related behaviors and academic achievement within socioeconomically disadvantaged populations. (c) 2015 APA, all rights reserved).

Texting while driving: is speech-based text entry less risky than handheld text entry?

PubMed

He, J; Chaparro, A; Nguyen, B; Burge, R J; Crandall, J; Chaparro, B; Ni, R; Cao, S

2014-11-01

Research indicates that using a cell phone to talk or text while maneuvering a vehicle impairs driving performance. However, few published studies directly compare the distracting effects of texting using a hands-free (i.e., speech-based interface) versus handheld cell phone, which is an important issue for legislation, automotive interface design and driving safety training. This study compared the effect of speech-based versus handheld text entries on simulated driving performance by asking participants to perform a car following task while controlling the duration of a secondary text-entry task. Results showed that both speech-based and handheld text entries impaired driving performance relative to the drive-only condition by causing more variation in speed and lane position. Handheld text entry also increased the brake response time and increased variation in headway distance. Text entry using a speech-based cell phone was less detrimental to driving performance than handheld text entry. Nevertheless, the speech-based text entry task still significantly impaired driving compared to the drive-only condition. These results suggest that speech-based text entry disrupts driving, but reduces the level of performance interference compared to text entry with a handheld device. In addition, the difference in the distraction effect caused by speech-based and handheld text entry is not simply due to the difference in task duration. Copyright © 2014 Elsevier Ltd. All rights reserved.

Command generator tracker based direct model reference adaptive tracking guidance for Mars atmospheric entry

NASA Astrophysics Data System (ADS)

Li, Shuang; Peng, Yuming

2012-01-01

In order to accurately deliver an entry vehicle through the Martian atmosphere to the prescribed parachute deployment point, active Mars entry guidance is essential. This paper addresses the issue of Mars atmospheric entry guidance using the command generator tracker (CGT) based direct model reference adaptive control to reduce the adverse effect of the bounded uncertainties on atmospheric density and aerodynamic coefficients. Firstly, the nominal drag acceleration profile meeting a variety of constraints is planned off-line in the longitudinal plane as the reference model to track. Then, the CGT based direct model reference adaptive controller and the feed-forward compensator are designed to robustly track the aforementioned reference drag acceleration profile and to effectively reduce the downrange error. Afterwards, the heading alignment logic is adopted in the lateral plane to reduce the crossrange error. Finally, the validity of the guidance algorithm proposed in this paper is confirmed by Monte Carlo simulation analysis.

Entry dynamics of space shuttle orbiter with longitudinal stability and control uncertainties at supersonic and hypersonic speeds

NASA Technical Reports Server (NTRS)

Stone, H. W.; Powell, R. W.

1977-01-01

A six-degree-of-freedom simulation analysis was conducted to examine the effects of longitudinal static aerodynamic stability and control uncertainties on the performance of the space shuttle orbiter automatic (no manual inputs) entry guidance and control systems. To establish the acceptable boundaries, the static aerodynamic characteristics were varied either by applying a multiplier to the aerodynamic parameter or by adding an increment. With either of two previously identified control system modifications included, the acceptable longitudinal aerodynamic boundaries were determined.

STS-92 Mission Specialist Wakata has his launch and entry suit adjusted

NASA Technical Reports Server (NTRS)

2000-01-01

During pre-pack and fit check in the Operations and Checkout Building, STS-92 Mission Specialist Koichi Wakata of Japan gets an adjustment on his launch and entry suit. This mission is Wakata's second Shuttle flight. He and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. STS- 92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program.

STS-69 Mission Commander David M. Walker suits up

NASA Technical Reports Server (NTRS)

1995-01-01

STS-69 Mission Commander David M. Walker signals he's ready to fly as he finishes donning his launch/entry suit in the Operations and Checkout Building. Walker, who is embarking on his fourth trip into space, will depart shortly for Launch Pad 39A along with four fellow crew members. Awaiting the crew and liftoff at 11:09 a.m. EDT is the Space Shuttle Endeavour.

STS-71 Pilot Charles J. Precourt suits up

NASA Technical Reports Server (NTRS)

1995-01-01

STS-71 Pilot Charles J. Precourt gets a helping hand from a suit technician as he dons his launch/entry suit in the Operations and Checkout Building. About to embark on his second spaceflight, Precourt and six fellow crew members will shortly depart for Launch Pad 39A, where the Space Shuttle Atlantis is poised for a third liftoff attempt at 3:32 p.m. EDT.

Building Community College/Community Based Organizations (CBO) Partnerships: A Report to the William and Flora Hewlett Foundation

ERIC Educational Resources Information Center

Gruber, David

2004-01-01

National data increasingly show that the prevailing model of workforce development-- job search and basic training leading to an entry-level job-- does little to promote economic self sufficiency or career progression. In the face of strong evidence that some form of post-secondary training and education is needed to support a family, there is a…

STS-34 Commander Williams in KSC O and C Bldg prepares for TCDT activities

NASA Technical Reports Server (NTRS)

1989-01-01

STS-34 Commander Donald E. Williams is assisted by technicians with donning his launch and entry suit (LES) in the Kennedy Space Center (KSC) Operations and Checkout (O and C) Building prior to leaving for Launch Complex (LC) Pad 39B during terminal countdown demonstration test (TCDT) activities. Williams also catches a few minutes of relaxation while reclining in his chair.

Coalition for Education in the Outdoors Research Symposium Proceedings (4th, Bradford Woods, Indiana, January 9-11, 1998).

ERIC Educational Resources Information Center

Fox, Karen M., Ed.; Foti, Pamela E., Ed.; McAvoy, Leo H., Ed.; Young, Anderson B., Ed.; Ryan, Sean, Ed.; Johnson, Rebecca, Ed.; Bialeschki, M. Deborah, Ed.

This proceedings contains 13 papers from the 1998 Research Symposium of the Coalition for Education in the Outdoors. Following a preface "Building the Research Foundations of Outdoor Education" (Karen M. Fox, Leo H. McAvoy, Anderson B. Young), the entries are: (1) "An Integrative Review of the Literature on Women in the Outdoors" (Karla A.…

Returning Home: Scholars Say More Research is Needed on the Societal Re-Entry of the Formerly Incarcerated

ERIC Educational Resources Information Center

Roach, Ronald

2005-01-01

Since the late 1960s, politicians and policymakers have talked tough on crime and have passed tough laws to build prisons and to prescribe lengthy sentences for the criminally convicted. In the past five years, however, public attention has focused on a criminal justice issue to which politicians and other public officials previously paid little…

Exploring the anionic reactivity of ynimines, useful precursors of metalated ketenimines.

PubMed

Laouiti, Anouar; Couty, François; Marrot, Jérome; Boubaker, Taoufik; Rammah, Mohamed M; Rammah, Mohamed B; Evano, Gwilherm

2014-04-18

Insights into the reactivity of ynimines under anionic conditions are reported. They were shown to be excellent precursors of metalated ketenimines, which can be generated in situ by the reaction of ynimines with organolithium reagents or strong bases. The metalated ketenimines can then be trapped with various electrophiles and, depending on their substitution pattern, afford original and divergent entries to various building blocks.

Catching the Early Walker: An Examination of Potential Antecedents of Rapid Student Exit from Business-Related Undergraduate Degree Programmes in a Post-1992 University

ERIC Educational Resources Information Center

Bennett, Roger; Kottasz, Rita; Nocciolino, Julia

2007-01-01

Outputs from a computerised touch pad turnstile security system that recorded business students' entries into and exits from a university's buildings revealed that a significant number of the institution's first-year intake withdrew from their (business) degree programmes within a few weeks of enrolment. Accordingly, a sample of these "early…

THE IDENTIFICATION OF COMMON BEHAVIORAL FACTORS AS BASES FOR PRE-ENTRY PREPARATION OF WORKERS FOR GAINFUL EMPLOYMENT. FINAL REPORT.

ERIC Educational Resources Information Center

SJORGREN, DOUGLAS; AND OTHERS

THE PURPOSE OF THE STUDY WAS TO DETERMINE WHETHER COMMON BEHAVIORS COULD BE IDENTIFIED ACROSS OCCUPATIONS TO SERVE AS A BASIS FOR CURRICULUM BUILDING. INTERVIEWS WERE CONDUCTED WITH INCUMBENTS IN 47 AGRICULTURAL OCCUPATIONS AND 36 OCCUPATIONS IN THE METAL FABRICATING INDUSTRY FOR A TOTAL OF 466 INTERVIEWS IN COLORADO AND NEBRASKA. THE INTERVIEW…

B-1 Systems Approach to Training. Task Analysis Listings

DTIC Science & Technology

1975-07-01

OFF FUEL VALVES AND PUMPS PHR-OFF FUEL VALVES AND PUMPS = AUTO ^FT TFR MODE LAND SELECTOR SWITCHES TQ *QFF...TFR MODE SWITCH-RIGHT «JFT L TFR MODE SELECT SWITCH TQ * TF1 CHECKLIST TFR MODE SWITCH-LEFT TFR MODE SWITCH-LEFT...DOOR HANDLE ENTRY LADDER CONTROL SWITCH ENTRY LADDER CONTROL SWITCH = DN* 16.1.1.001.OC* SET TANK FILL VALVE SWS ON

Deorbit targeting

NASA Technical Reports Server (NTRS)

Tempelman, W. H.

1973-01-01

The navigation and control of the space shuttle during atmospheric entry are discussed. A functional flow diagram presenting the basic approach to the deorbit targeting problem is presented. The major inputs to be considered are: (1) vehicle state vector, (2) landing site location, (3) entry interface parameters, (4) earliest desired time of landing, and (5) maximum cross range. Mathematical models of the navigational procedures based on controlled thrust times are developed.

Laboratory data manipulation tools basic data handling programs. Volume 2: Detailed software/hardware documentation

NASA Technical Reports Server (NTRS)

1981-01-01

The set of computer programs described allows for data definition, data input, and data transfer between the LSI-11 microcomputers and the VAX-11/780 minicomputer. Program VAXCOM allows for a simple method of textual file transfer from the LSI to the VAX. Program LSICOM allows for easy file transfer from the VAX to the LSI. Program TTY changes the LSI-11 operators console to the LSI's printing device. Program DICTIN provides a means for defining a data set for input to either computer. Program DATAIN is a simple to operate data entry program which is capable of building data files on either machine. Program LEDITV is an extremely powerful, easy to use, line oriented text editor. Program COPYSBF is designed to print out textual files on the line printer without character loss from FORTRAN carriage control or wide record transfer.

A review of air exchange rate models for air pollution exposure assessments.

PubMed

Breen, Michael S; Schultz, Bradley D; Sohn, Michael D; Long, Thomas; Langstaff, John; Williams, Ronald; Isaacs, Kristin; Meng, Qing Yu; Stallings, Casson; Smith, Luther

2014-11-01

A critical aspect of air pollution exposure assessments is estimation of the air exchange rate (AER) for various buildings where people spend their time. The AER, which is the rate of exchange of indoor air with outdoor air, is an important determinant for entry of outdoor air pollutants and for removal of indoor-emitted air pollutants. This paper presents an overview and critical analysis of the scientific literature on empirical and physically based AER models for residential and commercial buildings; the models highlighted here are feasible for exposure assessments as extensive inputs are not required. Models are included for the three types of airflows that can occur across building envelopes: leakage, natural ventilation, and mechanical ventilation. Guidance is provided to select the preferable AER model based on available data, desired temporal resolution, types of airflows, and types of buildings included in the exposure assessment. For exposure assessments with some limited building leakage or AER measurements, strategies are described to reduce AER model uncertainty. This review will facilitate the selection of AER models in support of air pollution exposure assessments.

Preentry communications study. Outer planets atmospheric entry probe

NASA Technical Reports Server (NTRS)

Hinrichs, C. A.

1976-01-01

A pre-entry communications study is presented for a relay link between a Jupiter entry probe and a spacecraft in hyperbolic orbit. Two generic communications links of interest are described: a pre-entry link to a spun spacecraft antenna, and a pre-entry link to a despun spacecraft antenna. The propagation environment of Jupiter is defined. Although this is one of the least well known features of Jupiter, enough information exists to reasonably establish bounds on the performance of a communications link. Within these bounds, optimal carrier frequencies are defined. The next step is to identify optimal relative geometries between the probe and the spacecraft. Optimal trajectories are established for both spun and despun spacecraft antennas. Given the optimal carrier frequencies, and the optimal trajectories, the data carrying capacities of the pre-entry links are defined. The impact of incorporating pre-entry communications into a basic post entry probe is then assessed. This assessment covers the disciplines of thermal control, power source, mass properties and design layout. A conceptual design is developed of an electronically despun antenna for use on a Pioneer class of spacecraft.

Evaluating student learning outcomes in oral health knowledge and skills.

PubMed

Lewis, Adrienne; Edwards, Suzanne; Whiting, Glenda; Donnelly, Frank

2018-06-01

To evaluate whether a set of oral health resources designed for workforce training was relevant for students undertaking an entry-level nursing or aged care qualification. Oral health is one of the most neglected aspects of nursing care experienced by older people. Despite efforts to improve aged care worker oral health knowledge and skills, one-off training and rapid staff turnover have hindered the success of workplace programmes. Inadequate oral health content in entry-level nursing and aged care qualifications has perpetuated this. Kirkpatrick's training and evaluation model was used to evaluate the resources developed by a project called Building Better Oral Health Communities. Students used them as prescribed study materials and completed pre- and postintervention questionnaires. Educators were interviewed to obtain their feedback. Quantitative data were analysed using descriptive and inferential statistics. Qualitative data were collated according to relevance to learning, presentation style and interest. Evaluation showed high levels of student and educator satisfaction. Student learning outcomes demonstrated consistently positive attitudes and significant self-reported improvements in oral health knowledge and skills. Irrespective of course type, students gained similar levels of oral health knowledge and skills following use of the resources. Nurses and care workers must be able to provide consistent standards of oral health care as a fundamental part of caring for patients. Validated as an effective learning and teaching package, it is recommended that these resources be used to strengthen the oral health content of entry-level nursing and aged care qualifications. Building the oral health capacity of nurses and care workers is one way of reversing oral health neglect and improving the quality of care provided to older people. © 2017 John Wiley & Sons Ltd.

Propulsion Technology Development for Sample Return Missions Under NASA's ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil, Eric J.; Vento, Daniel; Dankanich, John W.; Munk, Michelle M.; Hahne, David

2011-01-01

The In-Space Propulsion Technology (ISPT) Program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. Sample return missions could be quite varied, from collecting and bringing back samples of comets or asteroids, to soil, rocks, or atmosphere from planets or moons. The paper will describe the ISPT Program s propulsion technology development activities relevant to future sample return missions. The sample return propulsion technology development areas for ISPT are: 1) Sample Return Propulsion (SRP), 2) Planetary Ascent Vehicles (PAV), 3) Entry Vehicle Technologies (EVT), and 4) Systems/mission analysis and tools that focuses on sample return propulsion. The Sample Return Propulsion area is subdivided into: a) Electric propulsion for sample return and low cost Discovery-class missions, b) Propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and c) Low TRL advanced propulsion technologies. The SRP effort will continue work on HIVHAC thruster development in FY2011 and then transitions into developing a HIVHAC system under future Electric Propulsion for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks will continue under advanced propulsion technologies for sample return with direct applicability to a Mars Sample Return (MSR) mission and with general applicability to all future planetary spacecraft. A major effort under the EVT area is multi-mission technologies for Earth Entry Vehicles (MMEEV), which will leverage and build upon previous work related to Earth Entry Vehicles (EEV). The major effort under the PAV area is the Mars Ascent Vehicle (MAV). The MAV is a new development area to ISPT, and builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies.

Data Preparation Process for the Buildings Performance Database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, Travis; Dunn, Laurel; Mercado, Andrea

2014-06-30

The Buildings Performance Database (BPD) includes empirically measured data from a variety of data sources with varying degrees of data quality and data availability. The purpose of the data preparation process is to maintain data quality within the database and to ensure that all database entries have sufficient data for meaningful analysis and for the database API. Data preparation is a systematic process of mapping data into the Building Energy Data Exchange Specification (BEDES), cleansing data using a set of criteria and rules of thumb, and deriving values such as energy totals and dominant asset types. The data preparation processmore » takes the most amount of effort and time therefore most of the cleansing process has been automated. The process also needs to adapt as more data is contributed to the BPD and as building technologies over time. The data preparation process is an essential step between data contributed by providers and data published to the public in the BPD.« less

Prenatal alcohol exposure, adaptive function, and entry into adult roles in a prospective study of young adults.

PubMed

Lynch, Mary Ellen; Kable, Julie A; Coles, Claire D

2015-01-01

Although many studies have demonstrated effects of prenatal alcohol exposure (PAE) on physical, cognitive, and behavioral development in children, few have focused on the long term effects on adults. In this study, data are presented on adaptive function and entry into adult roles in a community sample of young adults with PAE. The expectation was that prenatally exposed adults would show lower adaptive functioning and more difficulty with entry into adult roles than the non-exposed control group and that these effects would be related to the severity of PAE effects. The predominantly African-American, low income sample included adults with a wide range of prenatal exposure (n = 123) as well as control groups for socioeconomic (SES) (n =5 9) and disability (n = 54) status. The mothers of the alcohol-exposed and SES-control group participants were recruited before birth and offspring have been followed up periodically. The disability control group was recruited in adolescence. The adults were interviewed about adaptive function in day-to-day life and adult role entry. Collateral adults who were well-acquainted with each participant were interviewed concerning adaptive function. Results showed that adults who were dysmorphic and/or cognitively affected by PAE had difficulty with adaptive function and entry into adult roles. Males showing cognitive effects with no physical effects were the most severely affected. Results for exposed adults not showing physical or cognitive effects were similar to or more positive than those of the control group for most outcomes. PAE has long-term effects on adaptive outcomes in early adulthood. Additional research should focus on possible interventions at this transition and on factors contributing to the adjustment of the exposed, but unaffected participants. Copyright © 2015 Elsevier Inc. All rights reserved.

Cyclin B in mouse oocytes and embryos: importance for human reproduction and aneuploidy.

PubMed

Polański, Zbigniew; Homer, Hayden; Kubiak, Jacek Z

2012-01-01

Oocyte maturation and early embryo development require precise coordination between cell cycle progression and the developmental programme. Cyclin B plays a major role in this process: its accumulation and degradation is critical for driving the cell cycle through activation and inactivation of the major cell cycle kinase, CDK1. CDK1 activation is required for M-phase entry whereas its inactivation leads to exit from M-phase. The tempo of oocyte meiotic and embryonic mitotic divisions is set by the rate of cyclin B accumulation and the timing of its destruction. By controlling when cyclin B destruction is triggered and by co-ordinating this with the completion of chromosome alignment, the spindle assembly checkpoint (SAC) is a critical quality control system important for averting aneuploidy and for building in the flexibility required to better integrate cell cycle progression with development. In this review we focus on cyclin B metabolism in mouse oocytes and embryos and illustrate how the cell cycle-powered clock (in fact cyclin B-powered clock) controls oocyte maturation and early embryo development, thereby providing important insight into human reproduction and potential causes of Down syndrome.

Three-dimensional vapor intrusion modeling approach that combines wind and stack effects on indoor, atmospheric, and subsurface domains.

PubMed

Shirazi, Elham; Pennell, Kelly G

2017-12-13

Vapor intrusion (IV) exposure risks are difficult to characterize due to the role of atmospheric, building and subsurface processes. This study presents a three-dimensional VI model that extends the common subsurface fate and transport equations to incorporate wind and stack effects on indoor air pressure, building air exchange rate (AER) and indoor contaminant concentration to improve VI exposure risk estimates. The model incorporates three modeling programs: (1) COMSOL Multiphysics to model subsurface fate and transport processes, (2) CFD0 to model atmospheric air flow around the building, and (3) CONTAM to model indoor air quality. The combined VI model predicts AER values, zonal indoor air pressures and zonal indoor air contaminant concentrations as a function of wind speed, wind direction and outdoor and indoor temperature. Steady state modeling results for a single-story building with a basement demonstrate that wind speed, wind direction and opening locations in a building play important roles in changing the AER, indoor air pressure, and indoor air contaminant concentration. Calculated indoor air pressures ranged from approximately -10 Pa to +4 Pa depending on weather conditions and building characteristics. AER values, mass entry rates and indoor air concentrations vary depending on weather conditions and building characteristics. The presented modeling approach can be used to investigate the relationship between building features, AER, building pressures, soil gas concentrations, indoor air concentrations and VI exposure risks.

Store-Operated Calcium Entries Control Neural Stem Cell Self-Renewal in the Adult Brain Subventricular Zone.

PubMed

Domenichini, Florence; Terrié, Elodie; Arnault, Patricia; Harnois, Thomas; Magaud, Christophe; Bois, Patrick; Constantin, Bruno; Coronas, Valérie

2018-05-01

The subventricular zone (SVZ) is the major stem cell niche in the brain of adult mammals. Within this region, neural stem cells (NSC) proliferate, self-renew and give birth to neurons and glial cells. Previous studies underlined enrichment in calcium signaling-related transcripts in adult NSC. Because of their ability to mobilize sustained calcium influxes in response to a wide range of extracellular factors, store-operated channels (SOC) appear to be, among calcium channels, relevant candidates to induce calcium signaling in NSC whose cellular activities are continuously adapted to physiological signals from the microenvironment. By Reverse Transcription Polymerase Chain Reaction (RT-PCR), Western blotting and immunocytochemistry experiments, we demonstrate that SVZ cells express molecular actors known to build up SOC, namely transient receptor potential canonical 1 (TRPC1) and Orai1, as well as their activator stromal interaction molecule 1 (STIM1). Calcium imaging reveals that SVZ cells display store-operated calcium entries. Pharmacological blockade of SOC with SKF-96365 or YM-58483 (also called BTP2) decreases proliferation, impairs self-renewal by shifting the type of SVZ stem cell division from symmetric proliferative to asymmetric, thereby reducing the stem cell population. Brain section immunostainings show that TRPC1, Orai1, and STIM1 are expressed in vivo, in SOX2-positive SVZ NSC. Injection of SKF-96365 in brain lateral ventricle diminishes SVZ cell proliferation and reduces the ability of SVZ cells to form neurospheres in vitro. The present study combining in vitro and in vivo approaches uncovers a major role for SOC in the control of SVZ NSC population and opens new fields of investigation for stem cell biology in health and disease. Stem Cells 2018;36:761-774. © AlphaMed Press 2018.

Access from Space: A New Perspective on NASA's Space Transportation Technology Requirements and Opportunities

NASA Technical Reports Server (NTRS)

Rasky, Daniel J.

2004-01-01

The need for robust and reliable access from space is clearly demonstrated by the recent loss of the Space Shuttle Columbia; as well as the NASA s goals to get the Shuttle re-flying and extend its life, build new vehicles for space access, produce successful robotic landers and s a q k retrr? llisrions, and maximize the science content of ambitious outer planets missions that contain nuclear reactors which must be safe for re-entry after possible launch aborts. The technology lynch pin of access from space is hypersonic entry systems such the thermal protection system, along with navigation, guidance and control (NG&C). But it also extends to descent and landing systems such as parachutes, airbags and their control systems. Current space access technology maturation programs such as NASA s Next Generation Launch Technology (NGLT) program or the In-Space Propulsion (ISP) program focus on maturing laboratory demonstrated technologies for potential adoption by specific mission applications. A key requirement for these programs success is a suitable queue of innovative technologies and advanced concepts to mature, including mission concepts enabled by innovative, cross cutting technology advancements. When considering space access, propulsion often dominates the capability requirements, as well as the attention and resources. From the perspective of access from space some new cross cutting technology drivers come into view, along with some new capability opportunities. These include new miniature vehicles (micro, nano, and picosats), advanced automated systems (providing autonomous on-orbit inspection or landing site selection), and transformable aeroshells (to maximize capabilities and minimize weight). This paper provides an assessment of the technology drivers needed to meet future access from space mission requirements, along with the mission capabilities that can be envisioned from innovative, cross cutting access from space technology developments.

Aerobic Exercise As a Potential Way to Improve Self-Control after Ego-Depletion in Healthy Female College Students

PubMed Central

Zou, Zhiling; Liu, Yang; Xie, Jing; Huang, Xiting

2016-01-01

Purpose: To test whether aerobic exercise can help build self-control stamina in healthy female young adults. Stamina in this context is defined as the capability to endure ego depletion, which can be measured with a self-control task following another activity also requiring self-control. Methods: Forty-five healthy undergraduate women were randomized to either an experimental group or control group. Participants in the experimental group were required to run in their campus running field for 30 min for a period of 5 weeks. Individuals in the control group were required to do diary entries regarding self-control in their daily lives, also for a period of 5 weeks. Before and after the 5-week intervention, participants completed a pain threshold test, a color word Stroop task and the following Cold Pressor Task (CPT) (with and without a distraction component). Results: There was significant decrease of pain tolerance in session 2 relative to session 1 in the control group, but no such decline was found in the experimental group (though the improvement of pain tolerance was not significant), possibly suggesting successful self-control against this kind of decline. Conclusions: Five weeks of aerobic exercise increased self-control after ego depletion in terms of pain tolerance. These findings suggest that aerobic exercise may serve as a potential effective intervention for enhancing self-control in a college female population. PMID:27148113

Guidance and Control Algorithms for the Mars Entry, Descent and Landing Systems Analysis

NASA Technical Reports Server (NTRS)

Davis, Jody L.; CwyerCianciolo, Alicia M.; Powell, Richard W.; Shidner, Jeremy D.; Garcia-Llama, Eduardo

2010-01-01

The purpose of the Mars Entry, Descent and Landing Systems Analysis (EDL-SA) study was to identify feasible technologies that will enable human exploration of Mars, specifically to deliver large payloads to the Martian surface. This paper focuses on the methods used to guide and control two of the contending technologies, a mid- lift-to-drag (L/D) rigid aeroshell and a hypersonic inflatable aerodynamic decelerator (HIAD), through the entry portion of the trajectory. The Program to Optimize Simulated Trajectories II (POST2) is used to simulate and analyze the trajectories of the contending technologies and guidance and control algorithms. Three guidance algorithms are discussed in this paper: EDL theoretical guidance, Numerical Predictor-Corrector (NPC) guidance and Analytical Predictor-Corrector (APC) guidance. EDL-SA also considered two forms of control: bank angle control, similar to that used by Apollo and the Space Shuttle, and a center-of-gravity (CG) offset control. This paper presents the performance comparison of these guidance algorithms and summarizes the results as they impact the technology recommendations for future study.

Market entry mode and competency building of Western oil companies in the Russian up stream oil and gas industry

NASA Astrophysics Data System (ADS)

Stephenson, Paul M.

This dissertation investigated the market entry and competency building strategies within the context of the Russian oil and gas industry. The study was designed to be of interest to business practitioners and academics given the growing importance of fossil fuel in the energy balance of the global economy and the importance of Russia as a supplier and purchaser in the international market. The study's mixed methodology provides an understanding on the environmental factors that are postulated to impact foreign direct investment flow into Russia and the oil and gas sector. A case study of a fictitiously named Western-Russo oil company was conducted to provide a deep understanding of how capability is viewed by Russian and Western employees and the factors that influences the implementation of a successful competency development program. The case was centered on the development of a Well-Site supervisor group within a Western-Russian oil company. Findings of the study showed that there was no correlation between corruption and foreign direct investment inflow into the Russian economy. The findings also showed that both Russian and Western employees in the oil and gas industry are less focused on nontechnical competency development issues, that Western employees are more orientated towards the bottom-line than Russian employees, and that both groups see operational management as a core competency. In the area of financial management and technology application, there were significant differences in the viewpoint of both groups. Western employees saw a stronger need for financial management and less need for technology application when compared to their Russian counterparts. The results have implications for Western business contemplating entering the Russian oil and gas industry. Western firms need to understand the key drivers that will help them overcome the social and cultural barriers between Western and Russian employees. The role of the company leader is very critical. The vision, passion, and a sense of realism of the person responsible for the market entry strategy will have a significant impact of the future success of the entry.

Study on the new technology of removing gangue and retaining roadway in complicated roof condition

NASA Astrophysics Data System (ADS)

Chen, Yanhao; Jiang, Cong

2018-04-01

This article in view of the complex roof conditions was carried on study about the new technology of removing gangue and retaining roadway, and tells a method of progressive reinforced concrete wall segment with gangue to keep the roadway, the roadway beside the support system is mainly composed of the lining, waste rock wall and the outer wall, the wall and the outer wall of concrete material width to build the strength of the progressive type filling body, waste rock wall with woven bag with waste rock assembled, paragraphs geological survey on the actual distance should be based on working face. This method relies on the interior of the gangue wall to make the pressure control and allow the roof to sink. In this paper, the finite deformation control of the roof is realized by the gangue wall and the high strength filling body. This method has the characteristics of low entry cost, good forming of roadway, high security and good stability, and can be applied to complex geological conditions such as hard roof.

Comparative advantage strategy for rapid pollution mitigation in China.

PubMed

Xu, Yuan

2013-09-03

Due to its sheer size and growth trend, no other country is facing more daunting challenges than China in reducing its pollutant emissions. A critical but inadequately addressed question is how rapidly China could feasibly achieve such mitigation. The stake is high not only about how much worse China's environmental quality could become but also about how the world can prevent catastrophic climate change. Through examining sulfur dioxide (SO2) mitigation in coal-fired power plants and wind energy development for carbon dioxide (CO2) mitigation, this article proposes a comparative advantage strategy for overcoming high barriers to fast pollution mitigation. On the demand side, China could first make progress in the deployment of more pollution control facilities and then improve their operational performance. The resulting low technological market entry barriers could help to build enough industrial capacity to meet the huge demand with prices under control. The strategy in the current practice could be improved to establish not only a large supply industry but also a strong one to enable other countries to move more rapidly in pollution mitigation.

Entry vehicle performance analysis and atmospheric guidance algorithm for precision landing on Mars. M.S. Thesis - Massachusetts Inst. of Technology

NASA Technical Reports Server (NTRS)

Dieriam, Todd A.

1990-01-01

Future missions to Mars may require pin-point landing precision, possibly on the order of tens of meters. The ability to reach a target while meeting a dynamic pressure constraint to ensure safe parachute deployment is complicated at Mars by low atmospheric density, high atmospheric uncertainty, and the desire to employ only bank angle control. The vehicle aerodynamic performance requirements and guidance necessary for 0.5 to 1.5 lift drag ratio vehicle to maximize the achievable footprint while meeting the constraints are examined. A parametric study of the various factors related to entry vehicle performance in the Mars environment is undertaken to develop general vehicle aerodynamic design requirements. The combination of low lift drag ratio and low atmospheric density at Mars result in a large phugoid motion involving the dynamic pressure which complicates trajectory control. Vehicle ballistic coefficient is demonstrated to be the predominant characteristic affecting final dynamic pressure. Additionally, a speed brake is shown to be ineffective at reducing the final dynamic pressure. An adaptive precision entry atmospheric guidance scheme is presented. The guidance uses a numeric predictor-corrector algorithm to control downrange, an azimuth controller to govern crossrange, and analytic control law to reduce the final dynamic pressure. Guidance performance is tested against a variety of dispersions, and the results from selected tests are presented. Precision entry using bank angle control only is demonstrated to be feasible at Mars.

Orion Entry Display Feeder and Interactions with the Entry Monitor System

NASA Technical Reports Server (NTRS)

Baird, Darren; Bernatovich, Mike; Gillespie, Ellen; Kadwa, Binaifer; Matthews, Dave; Penny, Wes; Zak, Tim; Grant, Mike; Bihari, Brian

2010-01-01

The Orion spacecraft is designed to return astronauts to a landing within 10 km of the intended landing target from low Earth orbit, lunar direct-entry, and lunar skip-entry trajectories. Al pile the landing is nominally controlled autonomously, the crew can fly precision entries manually in the event of an anomaly. The onboard entry displays will be used by the crew to monitor and manually fly the entry, descent, and landing, while the Entry Monitor System (EMS) will be used to monitor the health and status of the onboard guidance and the trajectory. The entry displays are driven by the entry display feeder, part of the Entry Monitor System (EMS). The entry re-targeting module, also part of the EMS, provides all the data required to generate the capability footprint of the vehicle at any point in the trajectory, which is shown on the Primary Flight Display (PFD). It also provides caution and warning data and recommends the safest possible re-designated landing site when the nominal landing site is no longer within the capability of the vehicle. The PFD and the EMS allow the crew to manually fly an entry trajectory profile from entry interface until parachute deploy having the flexibility to manually steer the vehicle to a selected landing site that best satisfies the priorities of the crew. The entry display feeder provides data from the ENIS and other components of the GNC flight software to the displays at the proper rate and in the proper units. It also performs calculations that are specific to the entry displays and which are not made in any other component of the flight software. In some instances, it performs calculations identical to those performed by the onboard primary guidance algorithm to protect against a guidance system failure. These functions and the interactions between the entry display feeder and the other components of the EMS are described.

NIOSH testimony on indoor air quality before the Subcommittee on Natural Resources, Agriculture Research and Environment Committee on Science, Space, and Technology, US House of Representatives by P. J. Bierbaum, September 27, 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-09-27

Testimony considered the activities of the National Institute for Occupational Safety and Health (NIOSH) in the area of indoor air quality. Energy conservation concerns in the 1970s forced the construction of buildings with the key element being preventing infiltration of untempered outside air. Many buildings were effectively sealed against air entry. Requests for health-hazard evaluations due to a suspected poor quality of indoor air have increased dramatically in recent years. Indoor-air-quality problems may arise from a variety of sources including human metabolic activity, smoking, structural components of the building and contents, biological contamination, office and mechanical equipment, and outside airmore » pollutants that enter the building. Many times the symptoms and health complaints reported by workers were diverse and not specific enough to readily identify the causative agent. The results from the health hazard evaluations have enabled NIOSH to classify the findings by primary type of problem: contamination from the building materials, 4%; microbial contamination, 5%; other contamination from inside the building, 15%; contamination from outside the building, 10%; inadequate ventilation, 53%; and unknown, 13%. Ergonomic and psychosocial issues often complicated the findings.« less

Version 1.00 programmer`s tools used in constructing the INEL RML/analytical radiochemistry sample tracking database and its user interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Femec, D.A.

This report describes two code-generating tools used to speed design and implementation of relational databases and user interfaces: CREATE-SCHEMA and BUILD-SCREEN. CREATE-SCHEMA produces the SQL commands that actually create and define the database. BUILD-SCREEN takes templates for data entry screens and generates the screen management system routine calls to display the desired screen. Both tools also generate the related FORTRAN declaration statements and precompiled SQL calls. Included with this report is the source code for a number of FORTRAN routines and functions used by the user interface. This code is broadly applicable to a number of different databases.

A Comparison of Two Skip Entry Guidance Algorithms

NASA Technical Reports Server (NTRS)

Rea, Jeremy R.; Putnam, Zachary R.

2007-01-01

The Orion capsule vehicle will have a Lift-to-Drag ratio (L/D) of 0.3-0.35. For an Apollo-like direct entry into the Earth's atmosphere from a lunar return trajectory, this L/D will give the vehicle a maximum range of about 2500 nm and a maximum crossrange of 216 nm. In order to y longer ranges, the vehicle lift must be used to loft the trajectory such that the aerodynamic forces are decreased. A Skip-Trajectory results if the vehicle leaves the sensible atmosphere and a second entry occurs downrange of the atmospheric exit point. The Orion capsule is required to have landing site access (either on land or in water) inside the Continental United States (CONUS) for lunar returns anytime during the lunar month. This requirement means the vehicle must be capable of flying ranges of at least 5500 nm. For the L/D of the vehicle, this is only possible with the use of a guided Skip-Trajectory. A skip entry guidance algorithm is necessary to achieve this requirement. Two skip entry guidance algorithms have been developed: the Numerical Skip Entry Guidance (NSEG) algorithm was developed at NASA/JSC and PredGuid was developed at Draper Laboratory. A comparison of these two algorithms will be presented in this paper. Each algorithm has been implemented in a high-fidelity, 6 degree-of-freedom simulation called the Advanced NASA Technology Architecture for Exploration Studies (ANTARES). NASA and Draper engineers have completed several monte carlo analyses in order to compare the performance of each algorithm in various stress states. Each algorithm has been tested for entry-to-target ranges to include direct entries and skip entries of varying length. Dispersions have been included on the initial entry interface state, vehicle mass properties, vehicle aerodynamics, atmosphere, and Reaction Control System (RCS). Performance criteria include miss distance to the target, RCS fuel usage, maximum g-loads and heat rates for the first and second entry, total heat load, and control system saturation. The comparison of the performance criteria has led to a down select and guidance merger that will take the best ideas from each algorithm to create one skip entry guidance algorithm for the Orion vehicle.

Entry dynamics of space shuttle orbiter with lateral-directional stability and control uncertainties at supersonic and hypersonic speeds

NASA Technical Reports Server (NTRS)

Stone, H. W.; Powell, R. W.

1977-01-01

A six-degree-of-freedom simulation analysis was conducted to examine the effects of the lateral-directional static aerodynamic stability and control uncertainties on the performance of the automatic (no manual inputs) entry-guidance and control systems of the space shuttle orbiter. To establish the acceptable boundaries of the uncertainties, the static aerodynamic characteristics were varied either by applying a multiplier to the aerodynamic parameter or by adding an increment. Control-system modifications were identified that decrease the sensitivity to off-nominal aerodynamics. With these modifications, the acceptable aerodynamic boundaries were determined.

Double-Entry Bookkeeping.

ERIC Educational Resources Information Center

Snyder, Herbert

1999-01-01

Explains the principles and mechanics of double-entry bookkeeping as a part of the accounting cycle to produce a functioning set of accounting records. Suggests that libraries need to have accurate and timely information about their spending to gain financial control and protect against fraud and abuse. (LRW)

The Methodology of Diagnosing Group and Intergroup Relations in Organizations.

DTIC Science & Technology

1980-06-01

The aim of organizational diagnosis is to produce learning about the system for its members. Diagnosis is a process consisting of three phases: entry...result, organizational diagnosis is a self-correcting process that permits the activities of subsequent phases to build upon the accomplishments of earlier... organizational diagnosis is shaped by the condition of the system being studied. The effects of underbounded and overbounded organizations influence what

STS-104 crewmembers in Building 9NW

NASA Image and Video Library

2001-01-17

JSC2001-00083 (January 2001) --- Several members of the STS-104 crew, assisted by suit technician Jim Cheatham, don training versions of the full-pressure launch and entry suit prior to a training session in one of the trainer/mockups (out of frame) in the Johnson Space Center’s Systems Integration Facility. Pictured (from right foreground) are astronauts James F. Reilly, Janet L. Kavandi, Michael L. Gernhardt, and Charles O. Hobaugh.

STS-88 Mission Specialist Currie suits up for launch

NASA Technical Reports Server (NTRS)

1998-01-01

STS-88 Mission Specialist Nancy J. Currie dons her orange launch and entry suit in the Operations and Checkout Building. STS-88 will be Currie's third spaceflight. She and the five other STS-88 crew members will depart shortly for Launch Pad 39A where the Space Shuttle Endeavour is poised for liftoff on the first U.S. mission dedicated to the assembly of the International Space Station.

Address entry while driving: speech recognition versus a touch-screen keyboard.

PubMed

Tsimhoni, Omer; Smith, Daniel; Green, Paul

2004-01-01

A driving simulator experiment was conducted to determine the effects of entering addresses into a navigation system during driving. Participants drove on roads of varying visual demand while entering addresses. Three address entry methods were explored: word-based speech recognition, character-based speech recognition, and typing on a touch-screen keyboard. For each method, vehicle control and task measures, glance timing, and subjective ratings were examined. During driving, word-based speech recognition yielded the shortest total task time (15.3 s), followed by character-based speech recognition (41.0 s) and touch-screen keyboard (86.0 s). The standard deviation of lateral position when performing keyboard entry (0.21 m) was 60% higher than that for all other address entry methods (0.13 m). Degradation of vehicle control associated with address entry using a touch screen suggests that the use of speech recognition is favorable. Speech recognition systems with visual feedback, however, even with excellent accuracy, are not without performance consequences. Applications of this research include the design of in-vehicle navigation systems as well as other systems requiring significant driver input, such as E-mail, the Internet, and text messaging.

Improved Re-Configurable Sliding Mode Controller for Reusable Launch Vehicle of Second Generation Addressing Aerodynamic Surface Failures and Thrust Deficiencies

NASA Technical Reports Server (NTRS)

Shtessel, Yuri B.

2002-01-01

In this report we present a time-varying sliding mode control (TV-SMC) technique for reusable launch vehicle (RLV) attitude control in ascent and entry flight phases. In ascent flight the guidance commands Euler roll, pitch and yaw angles, and in entry flight it commands the aerodynamic angles of bank, attack and sideslip. The controller employs a body rate inner loop and the attitude outer loop, which are separated in time-scale by the singular perturbation principle. The novelty of the TVSMC is that both the sliding surface and the boundary layer dynamics can be varied in real time using the PD-eigenvalue assignment technique. This salient feature is used to cope with control command saturation and integrator windup in the presence of severe disturbance or control effector failure, which enhances the robustness and fault tolerance of the controller. The TV-SMC is developed and tuned up for the X-33 sub-orbital technology demonstration vehicle in launch and re-entry modes. A variety of nominal, dispersion and failure scenarios have tested via high fidelity 6DOF simulations using MAVERIC/SLIM simulation software.

Robust mitotic entry is ensured by a latching switch.

PubMed

Tuck, Chloe; Zhang, Tongli; Potapova, Tamara; Malumbres, Marcos; Novák, Béla

2013-01-01

Cell cycle events are driven by Cyclin dependent kinases (CDKs) and by their counter-acting phosphatases. Activation of the Cdk1:Cyclin B complex during mitotic entry is controlled by the Wee1/Myt1 inhibitory kinases and by Cdc25 activatory phosphatase, which are themselves regulated by Cdk1:Cyclin B within two positive circuits. Impairing these two feedbacks with chemical inhibitors induces a transient entry into M phase referred to as mitotic collapse. The pathology of mitotic collapse reveals that the positive circuits play a significant role in maintaining the M phase state. To better understand the function of these feedback loops during G2/M transition, we propose a simple model for mitotic entry in mammalian cells including spatial control over Greatwall kinase phosphorylation. After parameter calibration, the model is able to recapture the complex and non-intuitive molecular dynamics reported by Potapova et al. (Potapova et al., 2011). Moreover, it predicts the temporal patterns of other mitotic regulators which have not yet been experimentally tested and suggests a general design principle of cell cycle control: latching switches buffer the cellular stresses which accompany cell cycle processes to ensure that the transitions are smooth and robust.

Shuttle program. MCC level C formulation requirements: Shuttle TAEM guidance and flight control

NASA Technical Reports Server (NTRS)

Carman, G. L.

1980-01-01

The Level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and flight control functions to be incorporated into the Mission Control Center entry profile planning processor are defined. This processor will be used for preentry evaluation of the entry through landing maneuvers, and will include a simplified three degree-of-freedom model of the body rotational dynamics that is necessary to account for the effects of attitude response on the trajectory dynamics. This simulation terminates at TAEM-autoland interface.

Entry Guidance for the 2011 Mars Science Laboratory Mission

NASA Technical Reports Server (NTRS)

Mendeck, Gavin F.; Craig, Lynn E.

2011-01-01

The 2011 Mars Science Laboratory will be the first Mars mission to attempt a guided entry to safely deliver the rover to a touchdown ellipse of 25 km x 20 km. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control the range flown. For application to Mars landers which must make use of the tenuous Martian atmosphere, it is critical to balance the lift of the vehicle to minimize the range error while still ensuring a safe deploy altitude. An overview of the process to generate optimized guidance settings is presented, discussing improvements made over the last nine years. Key dispersions driving deploy ellipse and altitude performance are identified. Performance sensitivities including attitude initialization error and the velocity of transition from range control to heading alignment are presented.

STS-92 Mission Specialist McArthur has his launch and entry suit adjusted

NASA Technical Reports Server (NTRS)

2000-01-01

In the Operations and Checkout Building, STS-92 Mission Specialist William S. McArthur Jr. has the gloves on his launch and entry suit adjusted during fit check. McArthur and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be McArthur's third Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program.

STS-92 Mission Specialist McArthur has his launch and entry suit adjusted

NASA Technical Reports Server (NTRS)

2000-01-01

During pre-pack and fit check in the Operations and Checkout Building, STS-92 Mission Specialist William S. McArthur Jr. uses a laptop computer while garbed in his full launch and entry suit. McArthur and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be McArthur's third Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program.

STS-92 Mission Specialist Lopez-Alegria has his launch and entry suit adjusted

NASA Technical Reports Server (NTRS)

2000-01-01

During pre-pack and fit check in the Operations and Checkout Building, STS-92 Mission Specialist Michael E. Lopez-Alegria tries on the helmet for his launch and entry suit. Lopez-Alegria and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be Lopez-Alegria's second Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program.

Palladium-Copper Catalyzed Alkyne Activation as an Entry to Multicomponent Syntheses of Heterocycles

NASA Astrophysics Data System (ADS)

Müller, Thomas J. J.

Alkynones and chalcones are of paramount importance in heterocyclic chemistry as three-carbon building blocks. In a very efficient manner, they can be easily generated by palladium-copper catalyzed reactions: ynones are formed from acid chlorides and terminal alkynes, and chalcones are synthesized in the sense of a coupling-isomerization (CI) sequence from (hetero)aryl halides and propargyl alcohols. Mild reaction conditions now open entries to sequential and consecutive transformations to heterocycles, such as furans, 3-halo furans, pyrroles, pyrazoles, substituted and annelated pyridines, annelated thiopyranones, pyridimines, meridianins, benzoheteroazepines and tetrahydro-β-carbolines, by consecutive coupling-cyclocondensation or CI-cyclocondensation sequences, as new diversity oriented routes to heterocycles. Domino reactions based upon the coupling-isomerization reaction (CIR) have been probed in the synthesis of antiparasital 2-substituted quinoline derivatives and highly luminescent spiro-benzofuranones and spiro-indolones.

Analytic Guidance for the First Entry in a Skip Atmospheric Entry

NASA Technical Reports Server (NTRS)

Garcia-Llama, Eduardo

2007-01-01

This paper presents an analytic method to generate a reference drag trajectory for the first entry portion of a skip atmospheric entry. The drag reference, expressed as a polynomial function of the velocity, will meet the conditions necessary to fit the requirements of the complete entry phase. The generic method proposed to generate the drag reference profile is further simplified by thinking of the drag and the velocity as density and cumulative distribution functions respectively. With this notion it will be shown that the reference drag profile can be obtained by solving a linear algebraic system of equations. The resulting drag profile is flown using the feedback linearization method of differential geometric control as guidance law with the error dynamics of a second order homogeneous equation in the form of a damped oscillator. This approach was first proposed as a revisited version of the Space Shuttle Orbiter entry guidance. However, this paper will show that it can be used to fly the first entry in a skip entry trajectory. In doing so, the gains in the error dynamics will be changed at a certain point along the trajectory to improve the tracking performance.

2. WEST REAR, WITH PORTHOLE ESCAPE HATCH ABOVE ENTRY DOOR. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. WEST REAR, WITH PORTHOLE ESCAPE HATCH ABOVE ENTRY DOOR. - Edwards Air Force Base, South Base Sled Track, Firing & Control Blockhouse for 10,000-foot Track, South of Sled Track at midpoint of 20,000-foot track, Lancaster, Los Angeles County, CA

12. DETAIL, ENTRY STAIRWELL TO CABLE TUNNEL, LAUNCHING PAD IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. DETAIL, ENTRY STAIRWELL TO CABLE TUNNEL, LAUNCHING PAD IN THE LEFT DISTANCE, TRACKSIDE CAMERA STAND AT TOP CENTER. - Edwards Air Force Base, South Base Sled Track, Firing Control Blockhouse, South of Sled Track at east end, Lancaster, Los Angeles County, CA

Thermal Vacuum Facility for Testing Thermal Protection Systems

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Knutson, Jeffrey R.; Sikora, Joseph G.

2002-01-01

A thermal vacuum facility for testing launch vehicle thermal protection systems by subjecting them to transient thermal conditions simulating re-entry aerodynamic heating is described. Re-entry heating is simulated by controlling the test specimen surface temperature and the environmental pressure in the chamber. Design requirements for simulating re-entry conditions are briefly described. A description of the thermal vacuum facility, the quartz lamp array and the control system is provided. The facility was evaluated by subjecting an 18 by 36 in. Inconel honeycomb panel to a typical re-entry pressure and surface temperature profile. For most of the test duration, the average difference between the measured and desired pressures was 1.6% of reading with a standard deviation of +/- 7.4%, while the average difference between measured and desired temperatures was 7.6% of reading with a standard deviation of +/- 6.5%. The temperature non-uniformity across the panel was 12% during the initial heating phase (t less than 500 sec.), and less than 2% during the remainder of the test.

Predicting Intentional Communication in Preverbal Preschoolers with Autism Spectrum Disorder.

PubMed

Sandbank, Micheal; Woynaroski, Tiffany; Watson, Linda R; Gardner, Elizabeth; Keçeli Kaysili, Bahar; Yoder, Paul

2017-06-01

Intentional communication has previously been identified as a value-added predictor of expressive language in preverbal preschoolers with autism spectrum disorder. In the present study, we sought to identify value-added predictors of intentional communication. Of five theoretically-motivated putative predictors of intentional communication measured early in the study (at study entry and 4 months after), three had significant zero-order correlations with later intentional communication (12 months after study entry) and were thus added to a linear model that predicted later intentional communication scores controlling for initial intentional communication scores at study entry. After controlling for initial intentional communication, early motor imitation was the only predictor that accounted for a significant amount of variance in children's later intentional communication.

An Automated Temperature Controller for the Advanced Hall Effect Experimental Data Acquisition System.

DTIC Science & Technology

1982-03-01

ENTRY: ACCA CONTAINS THE CHARACTER EXIT: ACCA CONTAINS THE CHARACTER DISPLAY TAilLE UPDATKD DISPLAY POINTER INCREMENTED VOLATILE RECISTERS: B...OUTPUTS THE RIC11T HALF-BYTE OF THE HEX NUMBER CON- TAINED IN ACCA TO THE DISPLAY. ENTRY: ACCA CONTAINS THE HEX NUMBER EXIT: ACCA CONTAINS THE HEX...OUTPUTS THE LEFT HALF-BYTE OF THE HEX NUMBER CON- TAINED IN ACCA TO THE DISPLAY. ENTRY: ACCA CONTAINS THE HEX NUMBER EXIT: ACCA CONTAINS THE HEX

The Final Count Down: A Review of Three Decades of Flight Controller Training Methods for Space Shuttle Mission Operations

NASA Technical Reports Server (NTRS)

Dittermore, Gary; Bertels, Christie

2011-01-01

Operations of human spaceflight systems is extremely complex; therefore, the training and certification of operations personnel is a critical piece of ensuring mission success. Mission Control Center (MCC-H), at the Lyndon B. Johnson Space Center in Houston, Texas, manages mission operations for the Space Shuttle Program, including the training and certification of the astronauts and flight control teams. An overview of a flight control team s makeup and responsibilities during a flight, and details on how those teams are trained and certified, reveals that while the training methodology for developing flight controllers has evolved significantly over the last thirty years the core goals and competencies have remained the same. In addition, the facilities and tools used in the control center have evolved. Changes in methodology and tools have been driven by many factors, including lessons learned, technology, shuttle accidents, shifts in risk posture, and generational differences. Flight controllers share their experiences in training and operating the space shuttle. The primary training method throughout the program has been mission simulations of the orbit, ascent, and entry phases, to truly train like you fly. A review of lessons learned from flight controller training suggests how they could be applied to future human spaceflight endeavors, including missions to the moon or to Mars. The lessons learned from operating the space shuttle for over thirty years will help the space industry build the next human transport space vehicle.

Crowdsourced Microfinance for Energy Efficiency in Underserved Communities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baird, Donnel; Cox, Morris; Harmarneh, Sarey

BlocPower’s mission is to provide access to energy efficiency financing for underserved communities across the United States. This project, “Crowdsourced Microfinance for Energy Efficiency in Underserved Communities,” is an extension of that goal and is grounded in the principles of providing engineering and financing services to those in need. The project is based on the creation of a BlocPower Marketplace as a central hub for connecting shovel-ready green buildings to institutional investors. This ‘connection’ entails using online crowdfunding to aggregate debt and equity capital from institutional investors to connect to customers (building owners) across various financial portfolios. BlocPower Marketplace ismore » intended to bring social, environmental, and financial returns to investors while also decreasing investor risk by loaning out funds for energy installations in individual buildings. In detail, the intended benefits of crowdsourcing are two-sided. Firstly, for building owners, clean energy retrofit installations improve building operations, reduce utility costs, and reduce harmful impacts to their surrounding environment. Secondly, for institutional investors, they gain access to a new market of energy efficiency and are able to provide debt or equity capital with high financial returns. This gives investors the opportunity to create social and environmental impact in communities around the country as well. With this in mind, BlocPower designed the marketplace to specifically answer exploratory research questions with respect to the pricing of energy financing. Institutional investors typically charge high rates on project financing solutions in the energy space, particularly in low and middle-income communities, because of fears that required debt service will not be made. This makes access to energy capital exorbitantly difficult for those that need it the most. Through this project, BlocPower tested investor appetite to determine if crowdsourcing would lower prices and subsequently lower barriers to entry for underserved communities’ access to energy capital. BlocPower’s results in this project were extremely informative for the industry. The project demonstrates that the marketplace is a scalable tool to help overcome barriers to entry for small building owners in underserved communities to access energy efficiency financing, but that crowdfunding by itself does not necessarily lower interest rates and make energy efficiency projects feasible. For that, we need a repayment mechanism that lowers perceived risk. That mechanism is on bill repayment.« less

Structure of unliganded HSV gD reveals a mechanism for receptor-mediated activation of virus entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krummenacher, Claude; Supekar, Vinit M.; Whitbeck, J. Charles

2010-07-19

Herpes simplex virus (HSV) entry into cells requires binding of the envelope glycoprotein D (gD) to one of several cell surface receptors. The 50 C-terminal residues of the gD ectodomain are essential for virus entry, but not for receptor binding. We have determined the structure of an unliganded gD molecule that includes these C-terminal residues. The structure reveals that the C-terminus is anchored near the N-terminal region and masks receptor-binding sites. Locking the C-terminus in the position observed in the crystals by an intramolecular disulfide bond abolished receptor binding and virus entry, demonstrating that this region of gD moves uponmore » receptor binding. Similarly, a point mutant that would destabilize the C-terminus structure was nonfunctional for entry, despite increased affinity for receptors. We propose that a controlled displacement of the gD C-terminus upon receptor binding is an essential feature of HSV entry, ensuring the timely activation of membrane fusion.« less

Extraterrestrial Regolith Derived Atmospheric Entry Heat Shields

NASA Technical Reports Server (NTRS)

Hogue, Michael D.; Mueller, Robert P.; Sibille, Laurent; Hintze, Paul E.; Rasky, Daniel J.

2016-01-01

High-mass planetary surface access is one of NASAs technical challenges involving entry, descent and landing (EDL). During the entry and descent phase, frictional interaction with the planetary atmosphere causes a heat build-up to occur on the spacecraft, which will rapidly destroy it if a heat shield is not used. However, the heat shield incurs a mass penalty because it must be launched from Earth with the spacecraft, thus consuming a lot of precious propellant. This NASA Innovative Advanced Concept (NIAC) project investigated an approach to provide heat shield protection to spacecraft after launch and prior to each EDL thus potentially realizing significant launch mass savings. Heat shields fabricated in situ can provide a thermal-protection system for spacecraft that routinely enter a planetary atmosphere. By fabricating the heat shield with space resources from materials available on moons and asteroids, it is possible to avoid launching the heat-shield mass from Earth. Regolith has extremely good insulating properties and the silicates it contains can be used in the fabrication and molding of thermal-protection materials. In this paper, we will describe three types of in situ fabrication methods for heat shields and the testing performed to determine feasibility of this approach.

The X-38 V-201 Flap Actuator Mechanism

NASA Technical Reports Server (NTRS)

Hagen, Jeff; Moore, Landon; Estes, Jay; Layer, Chris

2004-01-01

The X-38 Crew Rescue Vehicle V-201 space flight test article was designed to achieve an aerodynamically controlled re-entry from orbit in part through the use of two body mounted flaps on the lower rear side. These flaps are actuated by an electromechanical system that is partially exposed to the re-entry environment. These actuators are of a novel configuration and are unique in their requirement to function while exposed to re-entry conditions. The authors are not aware of any other vehicle in which a major actuator system was required to function throughout the complete re-entry profile while parts of the actuator were directly exposed to the ambient environment.

A Scalable and Dynamic Testbed for Conducting Penetration-Test Training in a Laboratory Environment

DTIC Science & Technology

2015-03-01

entry point through which to execute a payload to accomplish a higher-level goal: executing arbitrary code, escalating privileges , pivoting...Mobile Ad Hoc Network Emulator (EMANE)26 can emulate the entire network stack (physical to application -layer protocols). 2. Methodology To build a...to host Windows, Linux, MacOS, Android , and other operating systems without much effort. 4 E. A simple and automatic “restore” function: Many

A comparative analysis of the dissemination of best practice measures for key populations.

PubMed

Lundy, Jennifer; Santangelo, Jennifer; Rogers, Patrick; Kuehn, Lynn; Christensen, Sharon; Bournique, Judy; Mekhjian, Hagop; Kamal, Jyoti

2008-11-06

In collaboration with the department of Quality and Operations Improvement, Clinical Applications and the Information Warehouse, we have leveraged available Information Warehouse data to build a Best Practice Compliance Measurement Dashboard. This tool combines information from our operating room charting system, our order entry system and coding information from the patient billing and management system to provide 'previous day', data on a patients current course of treatment.

Building and Retaining the Career Force: New Procedures for Accessing and Assigning Army Enlisted Personnel: Annual Report 1990 Fiscal Year

DTIC Science & Technology

1992-05-01

researched, valid measure of general cognitive abilities. However, many critical Army tasks appear to require psychomotor and perceptual skills for their...temperament (achievement, discipline, stress toler- ance), psychomotor ability (e.g., eye-hand coordination), and spatial ability to job performance...answered: (1) What combinations of aptitude, temperament, psychomotor ability, and spatial ability, measured at or before entry into the Army, best

Building America Energy Renovations. A Business Case for Home Performance Contracting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Antonopoulos, C. A.; Sevigny, M.

2012-10-01

This research report gives an overview of the needs and opportunities that exist in the U.S. home performance contracting industry. The report discusses industry trends, market drivers, different business models, and points of entry for existing and new businesses hoping to enter the home performance contracting industry. Case studies of eight companies who successfully entered the industry are provided, including business metrics, start-up costs, and marketing approaches.

The Application of the Chinese Sense of "Balance" to Agreements Signed between Chinese and Foreign Institutions in the Chinese Higher Education Sector: Adding Depth to a Popular Cultural Concept

ERIC Educational Resources Information Center

Willis, Mike

2004-01-01

The Chinese sense of "balance" has been widely researched in the literature from several perspectives including culture (where it has been traced back to Confucian, neo-Confucian and Taoist roots), and business and market entry (where it has been linked to issues such as the development of trust, relationship building, and guanxi between…

Evaluation of Body Image and Sexual Satisfaction in Women Undergoing Female Genital Plastic/Cosmetic Surgery.

PubMed

Goodman, Michael P; Placik, Otto J; Matlock, David L; Simopoulos, Alex F; Dalton, Teresa A; Veale, David; Hardwick-Smith, Susan

2016-10-01

Little prospective data exists regarding the procedures constituting female genital plastic/cosmetic surgery (FGPS). To evaluate whether the procedures of labiaplasty and vaginoperineoplasty improve genital self image, and evaluate effects on sexual satisfaction. Prospective cohort case-controlled study of 120 subjects evaluated at baseline, 6, 12, and 24 months postoperative, paired with a demographically similar control group. Interventions include labiaplasty, clitoral hood reduction, and/or aesthetic vaginal tightening, defined as perineoplasty + "vaginoplasty" (aka "vaginal rejuvenation."). Outcome measures include body image, genital self-image, sexual satisfaction, and body esteem. As a group, study patients tested at baseline showing body dissatisfaction, negative genital self-image, and poorer indices of sexual satisfaction. Preoperative body image of study patients were in a range considered to be mild to moderately dysmorphic, but matched controls at one and two years; genital self-image scores at entry were considerably lower than controls, but by 2-year follow-up had surpassed control value at entry. Similarly, sexual satisfaction values, significantly lower at entry, equaled at one, and surpassed control values, at 2 years. Postoperatively, at all points in time, these differences in body image and genital self-image disappeared, and sexual satisfaction markedly improved. Overall body esteem did not differ between study and control groups, with the exception of the genital esteem quotient, which improved after surgery. Women requesting and completing FGPS, when tested by validated instruments, at entry report sexual dissatisfaction and negative genital self-image. When tested at several points in time after surgery up to two years, these findings were no longer present. When performed by an experienced surgeon, FGPS appears to provide sexual and genital self-image improvement. 2 Therapeutic. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

30 CFR 75.222 - Roof control plan-approval criteria.

Code of Federal Regulations, 2014 CFR

2014-07-01

... systems. (1) Systematic supplemental support should be installed throughout— (i) The tailgate entry of the first longwall panel prior to any mining; and (ii) In the proposed tailgate entry of each subsequent... should address— (i) Notification of miners that the travelway is blocked; (ii) Re-instruction of miners...

30 CFR 75.222 - Roof control plan-approval criteria.

Code of Federal Regulations, 2012 CFR

2012-07-01

... systems. (1) Systematic supplemental support should be installed throughout— (i) The tailgate entry of the first longwall panel prior to any mining; and (ii) In the proposed tailgate entry of each subsequent... should address— (i) Notification of miners that the travelway is blocked; (ii) Re-instruction of miners...

30 CFR 75.222 - Roof control plan-approval criteria.

Code of Federal Regulations, 2013 CFR

2013-07-01

... systems. (1) Systematic supplemental support should be installed throughout— (i) The tailgate entry of the first longwall panel prior to any mining; and (ii) In the proposed tailgate entry of each subsequent... should address— (i) Notification of miners that the travelway is blocked; (ii) Re-instruction of miners...

11. ENTRY STAIRWELL TO CABLE TUNNEL. REMAINS OF ELECTRICAL DISTRIBUTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. ENTRY STAIRWELL TO CABLE TUNNEL. REMAINS OF ELECTRICAL DISTRIBUTION STATIONS AT LEFT, TRACKSIDE CAMERA STAND AT FAR RIGHT. Looking northeast toward launch pad. - Edwards Air Force Base, South Base Sled Track, Firing Control Blockhouse, South of Sled Track at east end, Lancaster, Los Angeles County, CA

Preserving Marine Corps Forcible Entry in the 21st Century: Possible or Preposterous?

DTIC Science & Technology

2011-03-30

expanded their territorial control in ·southeast Asia . After a virtmilly unchecked advance through the Philippines, the Indies, ci large . portion...commanders may select one . ’ method or a ~ombination of entry capabilities to achieve surprise, initiative, and tempo. As MCD ? 3, Expeditionary

9 CFR 95.9 - Glue stock; requirements for unrestricted entry.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SANITARY CONTROL OF ANIMAL BYPRODUCTS (EXCEPT CASINGS), AND HAY AND STRAW, OFFERED FOR ENTRY INTO THE... Agriculture to be infected with foot-and-mouth disease or rinderpest may be imported without other restriction...-and-mouth disease, and rinderpest, and to assure further the identity of such materials until loaded...

30 CFR 75.326 - Mean entry air velocity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per minute reaching each working face where coal is being cut, mined, drilled for blasting, or loaded, and to any... the inby end of the line curtain, ventilation tubing, or other face ventilation control devices. [61...

30 CFR 75.326 - Mean entry air velocity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per minute reaching each working face where coal is being cut, mined, drilled for blasting, or loaded, and to any... the inby end of the line curtain, ventilation tubing, or other face ventilation control devices. [61...

30 CFR 75.326 - Mean entry air velocity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per minute reaching each working face where coal is being cut, mined, drilled for blasting, or loaded, and to any... the inby end of the line curtain, ventilation tubing, or other face ventilation control devices. [61...

Comparisons of musculoskeletal complaints and data entry between a sitting and a sit-stand workstation paradigm.

PubMed

Husemann, Britta; Von Mach, Carolin Yvonne; Borsotto, Daniel; Zepf, Kirsten Isabel; Scharnbacher, Jutta

2009-06-01

Seated working positions are often regarded as a cause for discomfort in the musculoskeletal system. Performing work in different working positions--that is, alternating between sitting and standing (sit-stand workstation paradigm)--could help reduce physical complaints. The questions were whether performing office work partly in a standing position leads to reduced complaints and whether standing would change the efficiency of data entry office work. We investigated the effect of a sit-stand workstation paradigmd during experimental data entry office work on physical and psychological complaints and data entry efficiency by conducting a randomized controlled trial with 60 male participants ages 18 to 35 years. In this experiment, musculoskeletal complaints were reduced by a sit-stand workstation paradigm. A trend could be identified indicating a small but nonsignificant loss of efficiency in data entry while standing. A sit-stand workstation paradigm reduces musculoskeletal complaints without considerably affecting data entry efficiency under the presented study conditions (young male participants, short duration, fixed and controlled sit-stand workstation paradigm, simulated experimental working condition). According to the present data, implementing a sit-stand workstation paradigm can be an effective workplace health intervention to reduce musculoskeletal complaints. This experiment encourages further studies on the effectiveness of a sit-stand workstation paradigm. Experimental research and field studies that prove the reduction of complaints when introducing a sit-stand workstation paradigm in the workplace could be the basis for evidence-based recommendations regarding such interventions.

Aerodynamic Interactions of Propulsive Deceleration and Reaction Control System Jets on Mars-Entry Aeroshells

NASA Astrophysics Data System (ADS)

Alkandry, Hicham

Future missions to Mars, including sample-return and human-exploration missions, may require alternative entry, descent, and landing technologies in order to perform pinpoint landing of heavy vehicles. Two such alternatives are propulsive deceleration (PD) and reaction control systems (RCS). PD can slow the vehicle during Mars atmospheric descent by directing thrusters into the incoming freestream. RCS can provide vehicle control and steering by inducing moments using thrusters on the hack of the entry capsule. The use of these PD and RCS jets, however, involves complex flow interactions that are still not well understood. The fluid interactions induced by PD and RCS jets for Mars-entry vehicles in hypersonic freestream conditions are investigated using computational fluid dynamics (CFD). The effects of central and peripheral PD configurations using both sonic and supersonic jets at various thrust conditions are examined in this dissertation. The RCS jet is directed either parallel or transverse to the freestream flow at different thrust conditions in order to examine the effects of the thruster orientation with respect to the center of gravity of the aeroshell. The physical accuracy of the computational method is also assessed by comparing the numerical results with available experimental data. The central PD configuration decreases the drag force acting on the entry capsule due to a shielding effect that prevents mass and momentum in the hypersonic freestream from reaching the aeroshell. The peripheral PD configuration also decreases the drag force by obstructing the flow around the aeroshell and creating low surface pressure regions downstream of the PD nozzles. The Mach number of the PD jets, however, does not have a significant effect on the induced fluid interactions. The reaction control system also alters the flowfield, surface, and aerodynamic properties of the aeroshell, while the jet orientation can have a significant effect on the control effectiveness of the RCS.

Perspectives of HIV agencies on improving HIV prevention, treatment, and care services in the USA.

PubMed

Khosla, Nidhi; Zachary, Iris

2016-10-01

HIV healthcare services in the USA are made available through a complex funding and delivery system. We present perspectives of HIV agencies on improvements that could lead to an ideal system of HIV prevention, treatment and care. We conducted semi-structured interviews with representatives from 21 HIV agencies offering diverse services in Baltimore, MD. Thematic analysis revealed six key themes: (1) Focusing on HIV prevention, (2) Establishing common entry-points for services, (3) Improving information availability, (4) Streamlining funding streams, (5) Removing competitiveness and (6) Building trust. We recommend that in addition to addressing operational issues regarding service delivery and patient care, initiatives to improve HIV service systems should address underlying social issues such as building trust.

NASA TechPort Entry for Coiled Brine Recovery Assembly (CoBRA) CL IR&D Project

NASA Technical Reports Server (NTRS)

Pensinger, Stuart

2014-01-01

The Coiled Brine Recovery Assembly (CoBRA) project will result in a proof-of-concept demonstration for a lightweight, compact, affordable, regenerable and disposable solution to brine water recovery. The heart of CoBRA is an evaporator that produces water vapor from brine. This evaporator leverages a novel design that enables passive transport of brine from place to place within the system. While it will be necessary to build or modify a system for testing the CoBRA concept, the emphasis of this project will be on developing the evaporator itself. This project will utilize a “test early, test often” approach, building at least one trial evaporator to guide the design of the final product.

Shape Morphing Adaptive Radiator Technology (SMART) Updates to Techport Entry

NASA Technical Reports Server (NTRS)

Erickson, Lisa; Bertagne, Christopher; Hartl, Darren; Witcomb, John; Cognata, Thomas

2017-01-01

The Shape-Morphing Adaptive Radiator Technology (SMART) project builds off the FY16 research effort that developed a flexible composite radiator panel and demonstrated its ability to actuate from SMA's attached to it. The proposed FY17 Shape-Morphing Adaptive Radiator Technology (SMART) project's goal is to 1) develop a practical radiator design with shape memory alloys (SMAs) bonded to the radiator's panel, and 2) build a multi-panel radiator prototype for subsequent system level thermal vacuum tests. The morphing radiator employs SMA materials to passively change its shape to adapt its rate of heat rejection to vehicle requirements. Conceptually, the radiator panel has a naturally closed position (like a cylinder) in a cold environment. Whenever the radiator's temperature gradually rises, SMA's affixed to the face sheet will pull the face sheet open a commensurate amount - increasing the radiators view to space and causing it to reject more heat. In a vehicle, the radiator's variable heat rejection capabilities would reduce the number of additional heat rejection devices in a vehicle's thermal control system. This technology aims to help achieve the required maximum to minimum heat rejection ratio required for manned space vehicles to adopt a lighter, simpler, single loop thermal control architecture (ATCS). Single loop architectures are viewed as an attractive means to reduce mass and complexity over traditional dual-loop solutions. However, fluids generally considered safe enough to flow within crewed cabins (e.g. propylene glycol-water mixtures) have much higher freezing points and viscosities than those used in the external sides of dual loop ATCSs (e.g. Ammonia and HFE7000).

Space Shuttle development update

NASA Technical Reports Server (NTRS)

Brand, V.

1984-01-01

The development efforts, since the STS-4 flight, in the Space Shuttle (SS) program are presented. The SS improvements introduced in the last two years include lower-weight loads, communication through the Tracking and Data Relay Satellite, expanded extravehicular activity capability, a maneuvering backpack and the manipulator foot restraint, the improvements in thermal projection system, the 'optional terminal area management targeting' guidance software, a rendezvous system with radar and star tracker sensors, and improved on-orbit living conditions. The flight demonstrations include advanced launch techniques (e.g., night launch and direct insertion to orbit); the on-orbit demonstrations; and added entry and launching capabilities. The entry aerodynamic analysis and entry flight control fine tuning are described. Reusability, improved ascent performance, intact abort and landing flexibility, rollout control, and 'smart speedbrakes' are among the many improvements planned for the future.

Handling Qualities of a Capsule Spacecraft During Atmospheric Entry

NASA Technical Reports Server (NTRS)

Bilimoria, Karl D.; Mueller, Eric R.

2010-01-01

A piloted simulation was conducted to study handling qualities for capsule spacecraft entering the Earth s atmosphere. Eight evaluation pilots, including six pilot astronauts, provided Cooper-Harper ratings, workload ratings, and qualitative comments. The simulation began after descending through the atmospheric entry interface point and continued until the drogue parachutes deployed. There were two categories of piloting tasks, both of which required bank angle control. In one task category, the pilot followed a closed-loop bank angle command computed by the backup guidance system to manage g-loads during entry. In the other task category, the pilot used intuitive rules to determine the desired bank angle independently, based on an open-loop schedule of vertical speed, Mach, and total energy specified at several range-to-target gates along the entry trajectory. Pilots were able to accurately track the bank angle guidance commands and steered the capsule toward the recovery site with essentially the same range error as the benchmark autopilot trajectory albeit with substantially higher propellant usage, and the handling qualities for this task were satisfactory. Another key result was that the complex piloting task of atmospheric entry could be performed satisfactorily, even in the presence of large dispersions, by controlling bank angle to follow a simple open-loop schedule.

[The continuous graphic presentation of interdepartmental results (author's transl)].

PubMed

Berger, J; Hirsch, H

1976-10-01

The results of interdepartmental determinations can be clearly presented in the laboratory in two ways: 1. Entry on a test card, according to Shewhart, as used in internal quality control. 2. Entry on a test card, constructed on the principle of the Cusum test. By the latter procedure, systematic errors are detected sooner than with the usual test card. A graphic variant of the Cusum test is described; a V-mask is not required; the card superficially resembles the usual control card, and the calculation time is minimal. This method may also be used to advantage in internal quality control.

Data entry errors and design for model-based tight glycemic control in critical care.

PubMed

Ward, Logan; Steel, James; Le Compte, Aaron; Evans, Alicia; Tan, Chia-Siong; Penning, Sophie; Shaw, Geoffrey M; Desaive, Thomas; Chase, J Geoffrey

2012-01-01

Tight glycemic control (TGC) has shown benefits but has been difficult to achieve consistently. Model-based methods and computerized protocols offer the opportunity to improve TGC quality but require human data entry, particularly of blood glucose (BG) values, which can be significantly prone to error. This study presents the design and optimization of data entry methods to minimize error for a computerized and model-based TGC method prior to pilot clinical trials. To minimize data entry error, two tests were carried out to optimize a method with errors less than the 5%-plus reported in other studies. Four initial methods were tested on 40 subjects in random order, and the best two were tested more rigorously on 34 subjects. The tests measured entry speed and accuracy. Errors were reported as corrected and uncorrected errors, with the sum comprising a total error rate. The first set of tests used randomly selected values, while the second set used the same values for all subjects to allow comparisons across users and direct assessment of the magnitude of errors. These research tests were approved by the University of Canterbury Ethics Committee. The final data entry method tested reduced errors to less than 1-2%, a 60-80% reduction from reported values. The magnitude of errors was clinically significant and was typically by 10.0 mmol/liter or an order of magnitude but only for extreme values of BG < 2.0 mmol/liter or BG > 15.0-20.0 mmol/liter, both of which could be easily corrected with automated checking of extreme values for safety. The data entry method selected significantly reduced data entry errors in the limited design tests presented, and is in use on a clinical pilot TGC study. The overall approach and testing methods are easily performed and generalizable to other applications and protocols. © 2012 Diabetes Technology Society.

Scout: An Impact Analysis Tool for Building Energy-Efficiency Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Chioke; Langevin, Jared; Roth, Amir

Evaluating the national impacts of candidate U.S. building energy-efficiency technologies has historically been difficult for organizations with large energy efficiency portfolios. In particular, normalizing results from technology-specific impact studies is time-consuming when those studies do not use comparable assumptions about the underlying building stock. To equitably evaluate its technology research, development, and deployment portfolio, the U.S. Department of Energy's Building Technologies Office has developed Scout, a software tool that quantitatively assesses the energy and CO2 impacts of building energy-efficiency measures on the national building stock. Scout efficiency measures improve upon the unit performance and/or lifetime operational costs of an equipmentmore » stock baseline that is determined from the U.S. Energy Information Administration Annual Energy Outlook (AEO). Scout measures are characterized by a market entry and exit year, unit performance level, cost, and lifetime. To evaluate measures on a consistent basis, Scout uses EnergyPlus simulation on prototype building models to translate measure performance specifications to whole-building energy savings; these savings impacts are then extended to a national scale using floor area weighting factors. Scout represents evolution in the building stock over time using AEO projections for new construction, retrofit, and equipment replacements, and competes technologies within market segments under multiple adoption scenarios. Scout and its efficiency measures are open-source, as is the EnergyPlus whole building simulation framework that is used to evaluate measure performance. The program is currently under active development and will be formally released once an initial set of measures has been analyzed and reviewed.« less

MCC level C formulation requirements. Shuttle TAEM targeting

NASA Technical Reports Server (NTRS)

Carman, G. L.; Montez, M. N.

1980-01-01

The level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and flight control functions to be incorporated into the Mission Control Center entry profile planning processor are described. This processor is used for preentry evaluation of the entry through landing maneuvers, and includes a simplified three degree-of-freedom model of the body rotational dynamics that is necessary to account for the effects of attitude response on the trajectory dynamics. This simulation terminates at TAEM-autoland interface.

Supersonic Retropropulsion Technology Development in NASA's Entry, Descent, and Landing Project

NASA Technical Reports Server (NTRS)

Edquist, Karl T.; Berry, Scott A.; Rhode, Matthew N.; Kelb, Bil; Korzun, Ashley; Dyakonov, Artem A.; Zarchi, Kerry A.; Schauerhamer, Daniel G.; Post, Ethan A.

2012-01-01

NASA's Entry, Descent, and Landing (EDL) space technology roadmap calls for new technologies to achieve human exploration of Mars in the coming decades [1]. One of those technologies, termed Supersonic Retropropulsion (SRP), involves initiation of propulsive deceleration at supersonic Mach numbers. The potential benefits afforded by SRP to improve payload mass and landing precision make the technology attractive for future EDL missions. NASA's EDL project spent two years advancing the technological maturity of SRP for Mars exploration [2-15]. This paper summarizes the technical accomplishments from the project and highlights challenges and recommendations for future SRP technology development programs. These challenges include: developing sufficiently large SRP engines for use on human-scale entry systems; testing and computationally modelling complex and unsteady SRP fluid dynamics; understanding the effects of SRP on entry vehicle stability and controllability; and demonstrating sub-scale SRP entry systems in Earth's atmosphere.

Immigrant community leaders identify four dimensions of trust for culturally appropriate diabetes education and care.

PubMed

Dahal, Govinda; Qayyum, Adnan; Ferreyra, Mariella; Kassim, Hussein; Pottie, Kevin

2014-10-01

This paper explores immigrant community leaders' perspectives on culturally appropriate diabetes education and care. We conducted exploratory workshops followed by focus groups with Punjabi, Nepali, Somali, and Latin American immigrant communities in Ottawa, Ontario. We used the constant comparative method of grounded theory to explore issues of trust and its impact on access and effectiveness of care. Detailed inquiry revealed the cross cutting theme of trust at the "entry" level and in relation to "accuracy" of diabetes information, as well as the influence of trust on personal "privacy" and on the "uptake" of recommendations. These four dimensions of trust stood out among immigrant community leaders: entry level, accuracy level, privacy level, and intervention level and were considered important attributes of culturally appropriate diabetes education and care. These dimensions of trust may promote trust at the patient-practitioner level and also may help build trust in the health care system.

It’s not only for the money: an analysis of adolescent versus adult entry into street prostitution.

PubMed

Cobbina, Jennifer E; Oselin, Sharon S

2011-01-01

Numerous studies examine the causal factors of entrance into prostitution and find economic marginalization, substance addiction, and interpersonal networks are common reasons women enter the trade. However, we know less about the role that age of onset plays in shaping female pathways into prostitution. Here, we build from insights into previous research by analyzing not only entry pathways but also how age categories are linked to time spent in the trade and whether the length of time in prostitution exacts a greater “toll” on women. Drawing from the feminist and age of onset literatures, we analyze 40 in-depth interviews with female street prostitutes from five U.S. cities. Our results underscore the importance of age as an organizing feature of women’s pathways into prostitution and the potential associated consequences of working in this trade.

X-33 Attitude Control System Design for Ascent, Transition, and Entry Flight Regimes

NASA Technical Reports Server (NTRS)

Hall, Charles E.; Gallaher, Michael W.; Hendrix, Neal D.

1998-01-01

The Vehicle Control Systems Team at Marshall Space Flight Center, Systems Dynamics Laboratory, Guidance and Control Systems Division is designing under a cooperative agreement with Lockheed Martin Skunkworks, the Ascent, Transition, and Entry flight attitude control system for the X-33 experimental vehicle. Ascent flight control begins at liftoff and ends at linear aerospike main engine cutoff (NECO) while Transition and Entry flight control begins at MECO and concludes at the terminal area energy management (TAEM) interface. TAEM occurs at approximately Mach 3.0. This task includes not only the design of the vehicle attitude control systems but also the development of requirements for attitude control system components and subsystems. The X-33 attitude control system design is challenged by a short design cycle, the design environment (Mach 0 to about Mach 15), and the X-33 incremental test philosophy. The X-33 design-to-launch cycle of less than 3 years requires a concurrent design approach while the test philosophy requires design adaptation to vehicle variations that are a function of Mach number and mission profile. The flight attitude control system must deal with the mixing of aerosurfaces, reaction control thrusters, and linear aerospike engine control effectors and handle parasitic effects such as vehicle flexibility and propellant sloshing from the uniquely shaped propellant tanks. The attitude control system design is, as usual, closely linked to many other subsystems and must deal with constraints and requirements from these subsystems.

Post-Flight EDL Entry Guidance Performance of the 2011 Mars Science Laboratory Mission

NASA Technical Reports Server (NTRS)

Mendeck, Gavin F.; McGrew, Lynn Craig

2012-01-01

The 2011 Mars Science Laboratory was the first successful Mars mission to attempt a guided entry which safely delivered the rover to a final position approximately 2 km from its target within a touchdown ellipse of 19.1 km x 6.9 km. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control the range flown. For application to Mars landers which must make use of the tenuous Martian atmosphere, it is critical to balance the lift of the vehicle to minimize the range error while still ensuring a safe deploy altitude. An overview of the process to generate optimized guidance settings is presented, discussing improvements made over the last nine years. Key dispersions driving deploy ellipse and altitude performance are identified. Performance sensitivities including attitude initialization error and the velocity of transition from range control to heading alignment are presented. Just prior to the entry and landing of MSL in August 2012, the EDL team examined minute tuning of the reference trajectory for the selected landing site, analyzed whether adjustment of bank reversal deadbands were necessary, the heading alignment velocity trigger was in union with other parameters to balance the EDL risks, and the vertical L/D command limits. This paper details a preliminary postflight assessment of the telemetry and trajectory reconstruction that is being performed, and updates the information presented in the former paper Entry Guidance for the 2011 Mars Science Laboratory Mission (AIAA Atmospheric Flight Mechanics Conference; 8-11 Aug. 2011; Portland, OR; United States)

A Model for Effective Systems Engineering Workforce Development at Space and Naval Warfare Systems Center (SSC) Atlantic

DTIC Science & Technology

2013-09-01

Entry  Activity  17.0 CONFIGURAT ION  MANAGEMEN T   Knowledge and basic abilities associated  to perform configuration management  activities  Entry...Activity  17.0 CONFIGURAT ION  MANAGEMEN T   Aware of configuration change control  Entry  Activity  18.0 REQUIREMEN TS MANAGEMENT  Participate in (for...Washington headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202

Mars entry-to-landing trajectory optimization and closed loop guidance

NASA Technical Reports Server (NTRS)

Ilgen, Marc R.; Manning, Raymund A.; Cruz, Manuel I.

1991-01-01

The guidance strategy of the Mars Rover Sample Return mission is presented in detail. Aeromaneuver versus aerobrake trades are examined, and an aerobrake analysis is presented which takes into account targeting, guidance, flight control, trajectory profile, delivery accuracy. An aeromaneuver analysis is given which includes the entry corridor, maneuver footprint, guidance, preentry phase, constant drag phase, equilibrium guide phase, variable drag phase, influence of trajectory profile on the entry flight loads, parachute deployment conditions and strategies, and landing accuracy. The Mars terminal descent phase is analyzed.

Automated Re-Entry System using FNPEG

NASA Technical Reports Server (NTRS)

Johnson, Wyatt R.; Lu, Ping; Stachowiak, Susan J.

2017-01-01

This paper discusses the implementation and simulated performance of the FNPEG (Fully Numerical Predictor-corrector Entry Guidance) algorithm into GNC FSW (Guidance, Navigation, and Control Flight Software) for use in an autonomous re-entry vehicle. A few modifications to FNPEG are discussed that result in computational savings -- a change to the state propagator, and a modification to cross-range lateral logic. Finally, some Monte Carlo results are presented using a representative vehicle in both a high-fidelity 6-DOF (degree-of-freedom) sim as well as in a 3-DOF sim for independent validation.

Results of Outdoor to Indoor Propagation Measurements from 5-32GHz

NASA Technical Reports Server (NTRS)

Houts, Jacquelynne R.; McDonough, Ryan S.

2016-01-01

The demand for wireless services has increased exponentially in the last few years and shows no signs of slowing in the near future. In order for the next generation wireless to provide seamless access, whether the user is indoors or out, a thorough understanding and validation of models describing the impact of building entry loss (BEL) is required. This information is currently lacking and presents a challenge for most system designers. For this reason empirical data is needed to assess the impact of BEL at frequencies that are being explored for future mobile broadband applications This paper present the results of measurements of outdoor-to-indoor propagation from 5-32 GHz in three different buildings. The first is a newer building that is similar in construction to modern residential home. The second is an older commercial office building. The last building is a very new commercial office building built using modern green building techniques. These three buildings allow for the measurement of propagation losses through both modern and older materials; such as glass windows and exterior block and siding. Initial results found that at particular spatial locations the BEL could be less than 1dB or more than 70dB with free space losses discounted (this is likely influenced by multipath). Additionally, it was observed that the PDF distributions of a majority of the measurements trended toward log-normal with means and standard deviations ranging from 8-38dB and 6-14dB, respectively.