Realization of the Energy Saving of the Environmental Examination Device Temperature Control System in Consideration of Temperature Characteristics

NASA Astrophysics Data System (ADS)

Onogaki, Hitoshi; Yokoyama, Shuichi

The temperature control of the environmental examination device has loss of the energy consumption to cool it while warming it. This paper proposed a tempareture control system method with energy saving for the enviromental examination device without using cooling in consideration of temperature characteristics.

Tuberculosis Infection Control in Health-Care Facilities: Environmental Control and Personal Protection.

PubMed

Lee, Ji Yeon

2016-10-01

Transmission of tuberculosis (TB) is a recognized risk to patients and healthcare workers in healthcare settings. The literature review suggests that implementation of combination control measures reduces the risk of TB transmission. Guidelines suggest a three-level hierarchy of controls including administrative, environmental, and respiratory protection. Among environmental controls, installation of ventilation systems is a priority because ventilation reduces the number of infectious particles in the air. Natural ventilation is cost-effective but depends on climatic conditions. Supplemented intervention such as air-cleaning methods including high efficiency particulate air filtration and ultraviolet germicidal irradiation should be considered in areas where adequate ventilation is difficult to achieve. Personal protective equipment including particulate respirators provides additional benefit when administrative and environmental controls cannot assure protection.

CADDIS Volume 4. Data Analysis: Advanced Analyses - Controlling for Natural Variability

EPA Pesticide Factsheets

Methods for controlling natural variability, predicting environmental conditions from biological observations method, biological trait data, species sensitivity distributions, propensity scores, Advanced Analyses of Data Analysis references.

Smart-device environmental control systems: experiences of people with cervical spinal cord injuries.

PubMed

Hooper, Bethany; Verdonck, Michele; Amsters, Delena; Myburg, Michelle; Allan, Emily

2017-09-06

Environmental control systems (ECS) are devices that enable people with severe physical limitations to independently control household appliances. Recent advancements in the area of environmental control technology have led to the development of ECS that can be controlled through mainstream smart-devices. There is limited research on ECS within Australia and no known research addressing smart-device ECS. The current study sought to explore users' experiences with smart-device ECS within Australia. The study followed a single embedded case study method. Participants (n = 5) were existing ECS users with a cervical spinal cord injury. Data were collected through semi-structured interviews with participants, reflexive journals and field notes. An inductive approach was used to analyze the data thematically. The experience of using a smart-device ECS presented both opportunities and costs to users. The opportunities included: independent control, choice, peace of mind, connection, effective resource use, and control over smart-phone functions and applications. The associated costs included: financial, time, frustration, and technical limitations. While findings are similar to previous research into traditional ECS this study indicates that smart-device ECS also offered a new opportunity for users to access mainstream smart-device functions and applications. Future research should investigate methods and resources that practitioners could utilize to better support new users of smart-device ECS. Implications for Rehabilitation As with traditional environmental control systems, users of smart environmental control systems report increased independence, choice and control. Smart-device environmental control systems provide users with access to mainstream smart-device functions and applications, which facilitate connection to family and the outside world. The costs to the user of smart-device environmental control systems include monetary and time investment, dealing with technical limitations and resulting frustration. Prescribers and installers must consider ways to mitigate these costs experienced by users.

Environmental monitoring: data trending using a frequency model.

PubMed

Caputo, Ross A; Huffman, Anne

2004-01-01

Environmental monitoring programs for the oversight of classified environments have used traditional statistical control charts to monitor trends in microbial recovery for classified environments. These methodologies work well for environments that yield measurable microbial recoveries. However, today successful increased control of microbial content yields numerous instances where microbial recovery in a sample is generally zero. As a result, traditional control chart methods cannot be used appropriately. Two methods to monitor the performance of a classified environment where microbial recovery is zero are presented. Both methods use the frequency between non-zero microbial recovery as an event. Therefore, the frequency of events is monitored rather than the microbial recovery count. Both methods are shown to be appropriate for use in the described instances.

CADDIS Volume 4. Data Analysis: Advanced Analyses - Controlling for Natural Variability: SSD Plot Diagrams

EPA Pesticide Factsheets

Methods for controlling natural variability, predicting environmental conditions from biological observations method, biological trait data, species sensitivity distributions, propensity scores, Advanced Analyses of Data Analysis references.

Purification, storage, and pathogenicity assay of rice false smut fungus under controlled environmental conditions

USDA-ARS?s Scientific Manuscript database

Rice false smut, caused by Ustilaginoidea virens, is serious disease that affects grain yield and quality. In the present study, a method to purify, store, and evaluate pathogenicity of U. virens under controlled environmental conditions was developed. Yellow chlamydospores were collected from fresh...

Environmental Control System Installer/Servicer (Residential Air Conditioning Mechanic). V-TECS Guide.

ERIC Educational Resources Information Center

Meyer, Calvin F.; Benson, Robert T.

This guide provides job relevant tasks, performance objectives, performance guides, resources, learning activitites, evaluation standards, and achievement testing in the occupation of environmental control system installer/servicer (residential air conditioning mechanic). It is designed to be used with any chosen teaching method. The course…

Development and Characterization of a Low-Pressure Calibration System for Hypersonic Wind Tunnels

NASA Technical Reports Server (NTRS)

Green, Del L.; Everhart, Joel L.; Rhode, Matthew N.

2004-01-01

Minimization of uncertainty is essential for accurate ESP measurements at very low free-stream static pressures found in hypersonic wind tunnels. Statistical characterization of environmental error sources requires a well defined and controlled calibration method. A calibration system has been constructed and environmental control software developed to control experimentation to eliminate human induced error sources. The initial stability study of the calibration system shows a high degree of measurement accuracy and precision in temperature and pressure control. Control manometer drift and reference pressure instabilities induce uncertainty into the repeatability of voltage responses measured from the PSI System 8400 between calibrations. Methods of improving repeatability are possible through software programming and further experimentation.

Experiences in Tick Control by Acaricide in the Traditional Cattle Sector in Zambia and Burkina Faso: Possible Environmental and Public Health Implications.

PubMed

De Meneghi, Daniele; Stachurski, Frédéric; Adakal, Hassane

2016-01-01

Livestock, especially cattle, play a paramount role in agriculture production systems, particularly in poor countries throughout the world. Ticks and tick-borne diseases (TBDs) have an important impact on livestock and agriculture production in sub-Saharan Africa. The authors review the most common methods used for the control of ticks and TBDs. Special emphasis is given to the direct application of acaricides to the host animals. The possible environmental and public health adverse effects (i.e., risks for the workers, residues in the environment and in food products of animal origin) are mentioned. The authors present two case studies, describing different field experiences in controlling ticks in two African countries. In Zambia (Southern Africa), a strategic dipping regime was used to control Rhipicephalus appendiculatus ticks, vectors of theileriosis, a deadly disease affecting cattle in the traditional livestock sector in Southern Province. The dipping regime adopted allowed to reduce the tick challenge and cattle mortally rate and, at the same time, to employ less acaricide as compared to the intensive dipping used so far, without disrupting the building-up of enzootic stability. In Burkina Faso (West Africa), where dipping was never used for tick control, an acaricide footbath was employed as an alternative method to the traditional technique used locally (portable manual sprayers). This was developed from field observations on the invasion/attachment process of the Amblyomma variegatum ticks - vector of cowdriosis - on the animal hosts, leading to a control method aimed to kill ticks temporarily attached to the interdigital areas before their permanent attachment to the predilection sites. This innovative method has been overall accepted by the local farmers. It has the advantage of greatly reducing costs of treatments and has a minimal environmental impact, making footbath a sustainable and replicable method, adoptable also in other West African countries. Although the two methods described, developed in very different contexts, are not comparable - if public health and environmental implications are taken into account, if a balance among efficacy of the control method(s), cost-effectiveness and sustainability is reached - a way forward for the implementation of a One Health strategy can be set.

Analytical Methods to Distinguish the Positive and Negative Spectra of Mineral and Environmental Elements Using Deep Ablation Laser-Induced Breakdown Spectroscopy (LIBS).

PubMed

Kim, Dongyoung; Yang, Jun-Ho; Choi, Soojin; Yoh, Jack J

2018-01-01

Environments affect mineral surfaces, and the surface contamination or alteration can provide potential information to understanding their regional environments. However, when investigating mineral surfaces, mineral and environmental elements appear mixed in data. This makes it difficult to determine their atomic compositions independently. In this research, we developed four analytical methods to distinguish mineral and environmental elements into positive and negative spectra based on depth profiling data using laser-induced breakdown spectroscopy (LIBS). The principle of the methods is to utilize how intensity varied with depth for creating a new spectrum. The methods were applied to five mineral samples exposed to four environmental conditions including seawater, crude oil, sulfuric acid, and air as control. The proposed methods are then validated by applying the resultant spectra to principal component analysis and data were classified by the environmental conditions and atomic compositions of mineral. By applying the methods, the atomic information of minerals and environmental conditions were successfully inferred in the resultant spectrum.

Integrated Pest Management, Preliminary. Curriculum Guide and Instructional Materials for a Secondary School Vo-Ag Program.

ERIC Educational Resources Information Center

Grady County Board of Education, Cairo, GA.

This curriculum guide presents methods to disseminate information to students interested in dealing with pests, or who have concerns about the environmental impacts of modern pest control methods. Options are encouraged for pest control methods using a combination of natural, biological, cultural, and chemical means of control. Specifically…

Functional Logistic Regression Approach to Detecting Gene by Longitudinal Environmental Exposure Interaction in a Case-Control Study

PubMed Central

Wei, Peng; Tang, Hongwei; Li, Donghui

2014-01-01

Most complex human diseases are likely the consequence of the joint actions of genetic and environmental factors. Identification of gene-environment (GxE) interactions not only contributes to a better understanding of the disease mechanisms, but also improves disease risk prediction and targeted intervention. In contrast to the large number of genetic susceptibility loci discovered by genome-wide association studies, there have been very few successes in identifying GxE interactions which may be partly due to limited statistical power and inaccurately measured exposures. While existing statistical methods only consider interactions between genes and static environmental exposures, many environmental/lifestyle factors, such as air pollution and diet, change over time, and cannot be accurately captured at one measurement time point or by simply categorizing into static exposure categories. There is a dearth of statistical methods for detecting gene by time-varying environmental exposure interactions. Here we propose a powerful functional logistic regression (FLR) approach to model the time-varying effect of longitudinal environmental exposure and its interaction with genetic factors on disease risk. Capitalizing on the powerful functional data analysis framework, our proposed FLR model is capable of accommodating longitudinal exposures measured at irregular time points and contaminated by measurement errors, commonly encountered in observational studies. We use extensive simulations to show that the proposed method can control the Type I error and is more powerful than alternative ad hoc methods. We demonstrate the utility of this new method using data from a case-control study of pancreatic cancer to identify the windows of vulnerability of lifetime body mass index on the risk of pancreatic cancer as well as genes which may modify this association. PMID:25219575

Functional logistic regression approach to detecting gene by longitudinal environmental exposure interaction in a case-control study.

PubMed

Wei, Peng; Tang, Hongwei; Li, Donghui

2014-11-01

Most complex human diseases are likely the consequence of the joint actions of genetic and environmental factors. Identification of gene-environment (G × E) interactions not only contributes to a better understanding of the disease mechanisms, but also improves disease risk prediction and targeted intervention. In contrast to the large number of genetic susceptibility loci discovered by genome-wide association studies, there have been very few successes in identifying G × E interactions, which may be partly due to limited statistical power and inaccurately measured exposures. Although existing statistical methods only consider interactions between genes and static environmental exposures, many environmental/lifestyle factors, such as air pollution and diet, change over time, and cannot be accurately captured at one measurement time point or by simply categorizing into static exposure categories. There is a dearth of statistical methods for detecting gene by time-varying environmental exposure interactions. Here, we propose a powerful functional logistic regression (FLR) approach to model the time-varying effect of longitudinal environmental exposure and its interaction with genetic factors on disease risk. Capitalizing on the powerful functional data analysis framework, our proposed FLR model is capable of accommodating longitudinal exposures measured at irregular time points and contaminated by measurement errors, commonly encountered in observational studies. We use extensive simulations to show that the proposed method can control the Type I error and is more powerful than alternative ad hoc methods. We demonstrate the utility of this new method using data from a case-control study of pancreatic cancer to identify the windows of vulnerability of lifetime body mass index on the risk of pancreatic cancer as well as genes that may modify this association. © 2014 Wiley Periodicals, Inc.

Environmental Pollution Control Policy-Making: An Analysis of Elite Perceptions and Preferences

ERIC Educational Resources Information Center

Althoff, Phillip; Greig, William H.

1974-01-01

This article is based on an analysis of the perceptions and preferences of elite groups concerning environmental pollution control policy making. Results showed that although the groups agreed that present methods were inadequate, they were, nevertheless, unable to agree upon the nature of a future policy-making system. (MA)

Establishment of first engineering specifications for environmental modification to eliminate schistosomiasis epidemic foci in urban areas.

PubMed

Kong, Shibo; Tan, Xiaodong; Deng, Zhiqing; Xie, Yaofei; Yang, Fen; Zheng, Zengwang

2017-08-01

Snail control is a key link in schistosomiasis control, but no unified methods for eliminating snails have been produced to date. This study was conducted to explore an engineering method for eliminating Oncomelania hupensis applicable to urban areas. The engineering specifications were established using the Delphi method. An engineering project based on these specifications was conducted in Hankou marshland to eliminate snails, including the transformation of the beach surface and ditches. Molluscicide was used as a supplement. The snail control effect was evaluated by field investigation. The engineering results fulfilled the requirements of the design. The snail density decreased to 0/0.11m 2 , and the snail area dropped to 0m 2 after the project. There was a statistically significant difference in the number of frames with snails before and after the project (P<0.05). Snails were completely eliminated through one year of continuous monitoring, and no new snails were found after a flood disaster. This study demonstrates that engineering specifications for environmental modification were successfully established. Environmental modification, mainly through beach and ditch remediation, can completely change the environment of Oncomelania breeding. This method of environmental modification combined with mollusciciding was highly effective at eliminating snails. Copyright © 2017 Elsevier B.V. All rights reserved.

Assessment of methods for methyl iodide emission reduction and pest control using a simulation model

USDA-ARS?s Scientific Manuscript database

Various methods have been developed to reduce atmospheric emissions from the agricultural use of highly volatile pesticides and mitigate their adverse environmental effects. The effectiveness of various methods on emissions reduction and pest control was assessed using simulation model in this study...

[Correlation of bacteria in the contaminated drug and the environmental microbes in the clean room for pharmaceutical microbial test investigated by FTIR].

PubMed

Pei, Lin; Hu, Chang-qin; Ma, Shi-hong; Dai, Hui; Hang, Tai-jun

2007-11-01

The FTIR method was used to investigate the correlation of bacteria in the contaminated drug and the environmental microbes in the clean room for pharmaceutical microbial test. The similarity of bacteria in the contaminated drug and environmental microbes was compared by critical hit value method and cluster analysis method. This constructed the FTIR spectra library of clean room environmental microbe, and determined the criterion to promptly judge if the bacteria isolated from pharmaceuticals were contaminated by environment or not, hence the exactness of "one-off report" of sterile test result can be guaranteed, and can be used for the dynamic monitoring of environmental bacteria of clean room. The method is proven to be simple, accurate and rapid, and can be easily spread to the pharmaceutical microbial control.

Staphylococcus aureus recovery from environmental and human locations in 2 collegiate athletic teams.

PubMed

Oller, Anna R; Province, Larry; Curless, Brian

2010-01-01

Staphylococcus aureus is spread via direct contact with persons and indirect contact via environmental surfaces such as weight benches. Athletes participating in direct-contact sports have an increased risk of acquiring S aureus infections. To determine (1) potential environmental reservoirs of S aureus in football and wrestling locker rooms and weight rooms, (2) environmental bacterial status after employing more stringent cleaning methods, (3) differences in colonization rates between athletes and nonathletes, (4) exposed body locations where Staphylococcus was recovered more frequently, and (5) personal hygiene practices of athletes and nonathletes. Cross-sectional study. Locker room and strengthening and conditioning facilities at a National Collegiate Athletic Association Division II university. Collegiate football players and wrestlers, with nonathlete campus residents serving as the control group. Infection control methods, education of the custodial staff, and education of the athletes regarding the Centers for Disease Control and Prevention guidelines for infection prevention. Cultures were taken from the participants' noses, fingertips, knuckles, forearms, and shoes and from the environment. Before the intervention, from the 108 environmental samples taken from the football locker room and weight room, 26 (24%) contained methicillin-susceptible S aureus (MSSA) and 33 (31%) contained methicillin-resistant S aureus (MRSA). From the 39 environmental samples taken from the wrestling locker room and pit areas, 1 (3%) contained MSSA and 4 (10%) contained MRSA. The MRSA rates were different between the 2 locations according to a chi(2) test (P = .01). Seven MRSA isolates were recovered from football players and 1 from a wrestler; no MRSA isolates were recovered from the control group. The fingertip location of S aureus recovery from football players was significant when compared with both other locations in football players and fingertips in wrestlers and the control group (P < .05). Football players and wrestlers shared more personal items than the control group (P < .05). After the intervention, the football locker room and weight room samples were negative for S aureus. Intact strengthening and conditioning equipment, proper hygiene, and proper disinfection methods lowered both environmental and human S aureus recovery at 1 university.

Experiences in Tick Control by Acaricide in the Traditional Cattle Sector in Zambia and Burkina Faso: Possible Environmental and Public Health Implications

PubMed Central

De Meneghi, Daniele; Stachurski, Frédéric; Adakal, Hassane

2016-01-01

Livestock, especially cattle, play a paramount role in agriculture production systems, particularly in poor countries throughout the world. Ticks and tick-borne diseases (TBDs) have an important impact on livestock and agriculture production in sub-Saharan Africa. The authors review the most common methods used for the control of ticks and TBDs. Special emphasis is given to the direct application of acaricides to the host animals. The possible environmental and public health adverse effects (i.e., risks for the workers, residues in the environment and in food products of animal origin) are mentioned. The authors present two case studies, describing different field experiences in controlling ticks in two African countries. In Zambia (Southern Africa), a strategic dipping regime was used to control Rhipicephalus appendiculatus ticks, vectors of theileriosis, a deadly disease affecting cattle in the traditional livestock sector in Southern Province. The dipping regime adopted allowed to reduce the tick challenge and cattle mortally rate and, at the same time, to employ less acaricide as compared to the intensive dipping used so far, without disrupting the building-up of enzootic stability. In Burkina Faso (West Africa), where dipping was never used for tick control, an acaricide footbath was employed as an alternative method to the traditional technique used locally (portable manual sprayers). This was developed from field observations on the invasion/attachment process of the Amblyomma variegatum ticks – vector of cowdriosis – on the animal hosts, leading to a control method aimed to kill ticks temporarily attached to the interdigital areas before their permanent attachment to the predilection sites. This innovative method has been overall accepted by the local farmers. It has the advantage of greatly reducing costs of treatments and has a minimal environmental impact, making footbath a sustainable and replicable method, adoptable also in other West African countries. Although the two methods described, developed in very different contexts, are not comparable – if public health and environmental implications are taken into account, if a balance among efficacy of the control method(s), cost-effectiveness and sustainability is reached – a way forward for the implementation of a One Health strategy can be set. PMID:27882313

Are there effective interventions to prevent hospital-acquired Legionnaires' disease or to reduce environmental reservoirs of Legionella in hospitals? A systematic review.

PubMed

Almeida, Dejanira; Cristovam, Elisabete; Caldeira, Daniel; Ferreira, Joaquim J; Marques, Teresa

2016-11-01

Legionnaires' disease (LD) is recognized as an important hospital-acquired disease. Despite the several methods available, the optimal method to control hospital-acquired LD is not well established and their overall efficacy requires further evaluation. To systematically review all controlled trials evaluating the efficacy of interventions to prevent hospital-acquired LD in patients at high risk of developing the disease and its effects on environmental colonization. A database search was performed through PubMed and the Cochrane Central Register of Controlled Trials (inception-November 2014). Eligible studies included all controlled studies evaluating interventions to prevent hospital-acquired LD in patients at high risk or evaluating the effect on environmental colonization. Both individual and pooled risk estimates were reported using risk ratio (RR) and 95% confidence intervals (95% CIs). There were no studies evaluating the risk reduction in hospital-acquired LD, but 4 studies evaluated the influence of copper-silver ionization and ultraviolet light in the reduction of environmental reservoirs of Legionella. The meta-analysis showed a significant 95% risk reduction of Legionella positivity in environmental samples using copper-silver ionization (RR, 0.05; 95% CI, 0.01-0.17) and 97% risk reduction with ultraviolet light (RR, 0.03; 95% CI, 0.002-0.41). The best available evidence suggests that copper-silver ionization and ultraviolet light are effective in reducing Legionella positivity in environmental samples. Nevertheless, the low quality of evidence weakens the robustness of conclusions. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Measuring New Environmental Paradigm Based on Students' Knowledge about Ecosystem and Locus of Control

ERIC Educational Resources Information Center

Putrawan, I. Made

2015-01-01

This research is aimed at obtaining information related to instrument development of Students' New Environmental Paradigm (NEP) based on their knowledge about ecosystem and Locus of Control (LOC). A survey method has been carried out by selecting senior high school students randomly with n = 362 (first stage 2013) and n = 722 (2014). Data analysed…

Phytometric intelligence sensors

NASA Technical Reports Server (NTRS)

Seelig, Hans-Dieter (Inventor); Stoner, II, Richard J. (Inventor); Hoehn, Alexander (Inventor); Adams, III, William Walter (Inventor)

2010-01-01

Methods and apparatus for determining when plants require watering, and methods of attending to the watering of plants including signaling the grower that the plants are in need of hydration are provided. The novel methods include real-time measurement of plant metabolics and phytometric physiology changes of intrinsic physical or behavioral traits within the plant such as determining physiological flux measurement of enzyme flux due to environmental changes such as the wind and drought stress, soil and plant mineral deficiencies, or the interaction with a bio-control for organic disease control including, cell movement, signal transduction, internal chemical processes and external environmental processes including when plants require watering, and methods of attending to the watering of plants including signaling the grower that the plants are in need of hydration.

Improving environmental impact and cost assessment for supplier evaluation

NASA Astrophysics Data System (ADS)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

A simple method for the production of large volume 3D macroporous hydrogels for advanced biotechnological, medical and environmental applications

NASA Astrophysics Data System (ADS)

Savina, Irina N.; Ingavle, Ganesh C.; Cundy, Andrew B.; Mikhalovsky, Sergey V.

2016-02-01

The development of bulk, three-dimensional (3D), macroporous polymers with high permeability, large surface area and large volume is highly desirable for a range of applications in the biomedical, biotechnological and environmental areas. The experimental techniques currently used are limited to the production of small size and volume cryogel material. In this work we propose a novel, versatile, simple and reproducible method for the synthesis of large volume porous polymer hydrogels by cryogelation. By controlling the freezing process of the reagent/polymer solution, large-scale 3D macroporous gels with wide interconnected pores (up to 200 μm in diameter) and large accessible surface area have been synthesized. For the first time, macroporous gels (of up to 400 ml bulk volume) with controlled porous structure were manufactured, with potential for scale up to much larger gel dimensions. This method can be used for production of novel 3D multi-component macroporous composite materials with a uniform distribution of embedded particles. The proposed method provides better control of freezing conditions and thus overcomes existing drawbacks limiting production of large gel-based devices and matrices. The proposed method could serve as a new design concept for functional 3D macroporous gels and composites preparation for biomedical, biotechnological and environmental applications.

Overview of paint removal methods

NASA Astrophysics Data System (ADS)

Foster, Terry

1995-04-01

With the introduction of strict environmental regulations governing the use and disposal of methylene chloride and phenols, major components of chemical paint strippers, there have been many new environmentally safe and effective methods of paint removal developed. The new methods developed for removing coatings from aircraft and aircraft components include: mechanical methods using abrasive media such as plastic, wheat starch, walnut shells, ice and dry ice, environmentally safe chemical strippers and paint softeners, and optical methods such as lasers and flash lamps. Each method has its advantages and disadvantages, and some have unique applications. For example, mechanical and abrasive methods can damage sensitive surfaces such as composite materials and strict control of blast parameters and conditions are required. Optical methods can be slow, leaving paint residues, and chemical methods may not remove all of the coating or require special coating formulations to be effective. As an introduction to environmentally safe and effective methods of paint removal, this paper is an overview of the various methods available. The purpose of this overview is to introduce the various paint removal methods available.

Modelling Aedes aegypti mosquito control via transgenic and sterile insect techniques: endemics and emerging outbreaks.

PubMed

Seirin Lee, S; Baker, R E; Gaffney, E A; White, S M

2013-08-21

The invasion of pest insects often changes or destroys a native ecosystem, and can result in food shortages and disease endemics. Issues such as the environmental effects of chemical control methods, the economic burden of maintaining control strategies and the risk of pest resistance still remain, and mosquito-borne diseases such as malaria and dengue fever prevail in many countries, infecting over 100 million worldwide in 2010. One environmentally friendly method for mosquito control is the Sterile Insect Technique (SIT). This species-specific method of insect control relies on the mass rearing, sterilization and release of large numbers of sterile insects. An alternative transgenic method is the Release of Insects carrying a Dominant Lethal (RIDL). Our objective is to consider contrasting control strategies for two invasive scenarios via SIT and RIDL: an endemic case and an emerging outbreak. We investigate how the release rate and size of release region influence both the potential for control success and the resources needed to achieve it, under a range of conditions and control strategies, and we discuss advantageous strategies with respect to reducing the release resources and strategy costs (in terms of control mosquito numbers) required to achieve complete eradication of wild-type mosquitoes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

PubMed Central

Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

2013-01-01

Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on. PMID:23603866

Integrated environmental risk assessment and whole-process management system in chemical industry parks.

PubMed

Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

2013-04-19

Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

Methods for quantification of soil-transmitted helminths in environmental media: current techniques and recent advances

PubMed Central

Collender, Philip A.; Kirby, Amy E.; Addiss, David G.; Freeman, Matthew C.; Remais, Justin V.

2015-01-01

Limiting the environmental transmission of soil-transmitted helminths (STH), which infect 1.5 billion people worldwide, will require sensitive, reliable, and cost effective methods to detect and quantify STH in the environment. We review the state of the art of STH quantification in soil, biosolids, water, produce, and vegetation with respect to four major methodological issues: environmental sampling; recovery of STH from environmental matrices; quantification of recovered STH; and viability assessment of STH ova. We conclude that methods for sampling and recovering STH require substantial advances to provide reliable measurements for STH control. Recent innovations in the use of automated image identification and developments in molecular genetic assays offer considerable promise for improving quantification and viability assessment. PMID:26440788

40 CFR 745.103 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... persons. EPA means the Environmental Protection Agency. Evaluation means a risk assessment and/or inspection. Foreclosure means any of the various methods, statutory or otherwise, known in different... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED...

Performance evaluation on air pollution reducing facilities and mechanism research on the third-party governance on environmental pollution

NASA Astrophysics Data System (ADS)

Bingsheng, Xu; Ling, Lin; Jin, Huang; Geng, Wang; Jianhua, Chen; Shuo, Yang; Huiting, Guo

2017-11-01

The paper focuses on developing the operational efficiency of air pollution reducing facilities and the treatment effect of the third-party governance on environmental pollution. Comprehensive analysis method and influence factor analysis are employed to build an evaluation index system by means of discussing major pollution control factors derived from the performance of pollution control equipment operation, environmental protection, technological economy, recourse consumption and manufacturing management. Based on the pattern of environmental pollution control offered by the third-party company, the static games model is further established between the government and the pollution emission firm by considering the whole process of the pollution abatement including investment, construction and operation of the treatment project, which focuses on establishing the policy condition and consequence by discussing the cost and benefit in a short and a long time, respectively. The research results can improve the market access requests of the pollution control equipment and normalize the environmental protection service offered by the third-party company. Moreover, the establishment of the evaluation index system for pollution control equipment and the evaluation mechanism for the third-party governance on environmental pollution has guiding significance on leading environmental protection industry and promoting market-oriented development

Meteorological Measurements from Satellite Platforms. [stability and control of flexible stochastic satellites

NASA Technical Reports Server (NTRS)

Suomi, V. E.

1975-01-01

The stability of stochastic satellites and the stability and control of flexible satellites were investigated. The effects of random environmental torques and noises in the moments of inertia of spinning and three-axes stabilized satellites were first compared analytically by four methods and by analog simulations. Among the analytical methods, it was shown that the Fokker-Planck formulation yields predictions which most coincide with the simulation results. It was then shown that the required stability criterion of a satellite is quite different from that obtained by a deterministic approach, under the assumption that the environmental and control torques experienced by the satellite are random. Finally, it was demonstrated that, by monitoring the deformations of the flexible elements of a satellite, the effectiveness of the satellite control system can be increased considerably.

40 CFR 63.144 - Process wastewater provisions-test methods and procedures for determining applicability and Group...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and Group 1/Group 2 determinations (determining which wastewater streams require control). (a... methods and procedures for determining applicability and Group 1/Group 2 determinations (determining which wastewater streams require control). 63.144 Section 63.144 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 63.144 - Process wastewater provisions-test methods and procedures for determining applicability and Group...

Code of Federal Regulations, 2010 CFR

2010-07-01

... and Group 1/Group 2 determinations (determining which wastewater streams require control). (a... methods and procedures for determining applicability and Group 1/Group 2 determinations (determining which wastewater streams require control). 63.144 Section 63.144 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 63.144 - Process wastewater provisions-test methods and procedures for determining applicability and Group...

Code of Federal Regulations, 2014 CFR

2014-07-01

... and Group 1/Group 2 determinations (determining which wastewater streams require control). (a... methods and procedures for determining applicability and Group 1/Group 2 determinations (determining which wastewater streams require control). 63.144 Section 63.144 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 63.144 - Process wastewater provisions-test methods and procedures for determining applicability and Group...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and Group 1/Group 2 determinations (determining which wastewater streams require control). (a... methods and procedures for determining applicability and Group 1/Group 2 determinations (determining which wastewater streams require control). 63.144 Section 63.144 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 63.144 - Process wastewater provisions-test methods and procedures for determining applicability and Group...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and Group 1/Group 2 determinations (determining which wastewater streams require control). (a... methods and procedures for determining applicability and Group 1/Group 2 determinations (determining which wastewater streams require control). 63.144 Section 63.144 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 408.61 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... components of a waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory...

40 CFR 408.71 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 217. (c...

40 CFR 408.81 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... components of a waste water amendable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory...

Staphylococcus aureus Recovery From Environmental and Human Locations in 2 Collegiate Athletic Teams

PubMed Central

Oller, Anna R.; Province, Larry; Curless, Brian

2010-01-01

Abstract Context: Staphylococcus aureus is spread via direct contact with persons and indirect contact via environmental surfaces such as weight benches. Athletes participating in direct-contact sports have an increased risk of acquiring S aureus infections. Objective: To determine (1) potential environmental reservoirs of S aureus in football and wrestling locker rooms and weight rooms, (2) environmental bacterial status after employing more stringent cleaning methods, (3) differences in colonization rates between athletes and nonathletes, (4) exposed body locations where Staphylococcus was recovered more frequently, and (5) personal hygiene practices of athletes and nonathletes. Design: Cross-sectional study. Setting: Locker room and strengthening and conditioning facilities at a National Collegiate Athletic Association Division II university. Patients or Other Participants: Collegiate football players and wrestlers, with nonathlete campus residents serving as the control group. Intervention(s): Infection control methods, education of the custodial staff, and education of the athletes regarding the Centers for Disease Control and Prevention guidelines for infection prevention. Main Outcome Measure(s): Cultures were taken from the participants' noses, fingertips, knuckles, forearms, and shoes and from the environment. Results: Before the intervention, from the 108 environmental samples taken from the football locker room and weight room, 26 (24%) contained methicillin-susceptible S aureus (MSSA) and 33 (31%) contained methicillin-resistant S aureus (MRSA). From the 39 environmental samples taken from the wrestling locker room and pit areas, 1 (3%) contained MSSA and 4 (10%) contained MRSA. The MRSA rates were different between the 2 locations according to a χ2 test (P  =  .01). Seven MRSA isolates were recovered from football players and 1 from a wrestler; no MRSA isolates were recovered from the control group. The fingertip location of S aureus recovery from football players was significant when compared with both other locations in football players and fingertips in wrestlers and the control group (P < .05). Football players and wrestlers shared more personal items than the control group (P < .05). After the intervention, the football locker room and weight room samples were negative for S aureus. Conclusions: Intact strengthening and conditioning equipment, proper hygiene, and proper disinfection methods lowered both environmental and human S aureus recovery at 1 university. PMID:20446834

Speech-driven environmental control systems--a qualitative analysis of users' perceptions.

PubMed

Judge, Simon; Robertson, Zoë; Hawley, Mark; Enderby, Pam

2009-05-01

To explore users' experiences and perceptions of speech-driven environmental control systems (SPECS) as part of a larger project aiming to develop a new SPECS. The motivation for this part of the project was to add to the evidence base for the use of SPECS and to determine the key design specifications for a new speech-driven system from a user's perspective. Semi-structured interviews were conducted with 12 users of SPECS from around the United Kingdom. These interviews were transcribed and analysed using a qualitative method based on framework analysis. Reliability is the main influence on the use of SPECS. All the participants gave examples of occasions when their speech-driven system was unreliable; in some instances, this unreliability was reported as not being a problem (e.g., for changing television channels); however, it was perceived as a problem for more safety critical functions (e.g., opening a door). Reliability was cited by participants as the reason for using a switch-operated system as back up. Benefits of speech-driven systems focused on speech operation enabling access when other methods were not possible; quicker operation and better aesthetic considerations. Overall, there was a perception of increased independence from the use of speech-driven environmental control. In general, speech was considered a useful method of operating environmental controls by the participants interviewed; however, their perceptions regarding reliability often influenced their decision to have backup or alternative systems for certain functions.

A life cycle assessment of destruction of ammunition.

PubMed

Alverbro, K; Björklund, A; Finnveden, G; Hochschorner, E; Hägvall, J

2009-10-30

The Swedish Armed Forces have large stocks of ammunition that were produced at a time when decommissioning was not considered. This ammunition will eventually become obsolete and must be destroyed, preferably with minimal impact on the environment and in a safe way for personnel. The aim of this paper is to make a comparison of the environmental impacts in a life cycle perspective of three different methods of decommissioning/destruction of ammunition, and to identify the environmental advantages and disadvantages of each of these destruction methods: open detonation; static kiln incineration with air pollution control combined with metal recycling, and a combination of incineration with air pollution control, open burning, recovery of some energetic material and metal recycling. Data used are for the specific processes and from established LCA databases. Recycling the materials in the ammunition and minimising the spread of airborne pollutants during incineration were found to be the most important factors affecting the life cycle environmental performance of the compared destruction methods. Open detonation with or without metal recycling proved to be the overall worst alternative from a life cycle perspective. The results for the static kiln and combination treatment indicate that the kind of ammunition and location of the destruction plant might determine the choice of method, since the environmental impacts from these methods are of little difference in the case of this specific grenade. Different methods for destruction of ammunition have previously been discussed from a risk and safety perspective. This is however to our knowledge the first study looking specifically on environmentally aspect in a life cycle perspective.

40 CFR 417.191 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... methylene blue active substances amenable to measurement by the method described in “Methods for Chemical Analysis of Water and Wastes,” 1971, Environmental Protection Agency, Analytical Quality Control Laboratory...

ALTERNATIVES FOR REDUCING INSECTICIDES ON COTTON AND CORN: ECONOMIC AND ENVIRONMENTAL IMPACT - SUPPLEMENT 1: DETAILED DATA FOR STATIC AND LINEAR ANALYSIS OF ALTERNATIVES FOR REDUCING INSECTICIDES ON COTTON AND CORN

EPA Science Inventory

The report lists the expected insect control costs and insecticide use per acre for each insect control method on corn and cotton in each region discussed in Alternatives for Reducing Insecticides on Cotton and Corn: Economic and Environmental Impact. All the runs used in the lin...

Methods for Quantification of Soil-Transmitted Helminths in Environmental Media: Current Techniques and Recent Advances.

PubMed

Collender, Philip A; Kirby, Amy E; Addiss, David G; Freeman, Matthew C; Remais, Justin V

2015-12-01

Limiting the environmental transmission of soil-transmitted helminths (STHs), which infect 1.5 billion people worldwide, will require sensitive, reliable, and cost-effective methods to detect and quantify STHs in the environment. We review the state-of-the-art of STH quantification in soil, biosolids, water, produce, and vegetation with regard to four major methodological issues: environmental sampling; recovery of STHs from environmental matrices; quantification of recovered STHs; and viability assessment of STH ova. We conclude that methods for sampling and recovering STHs require substantial advances to provide reliable measurements for STH control. Recent innovations in the use of automated image identification and developments in molecular genetic assays offer considerable promise for improving quantification and viability assessment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Maximum power point tracking algorithm based on sliding mode and fuzzy logic for photovoltaic sources under variable environmental conditions

NASA Astrophysics Data System (ADS)

Atik, L.; Petit, P.; Sawicki, J. P.; Ternifi, Z. T.; Bachir, G.; Della, M.; Aillerie, M.

2017-02-01

Solar panels have a nonlinear voltage-current characteristic, with a distinct maximum power point (MPP), which depends on the environmental factors, such as temperature and irradiation. In order to continuously harvest maximum power from the solar panels, they have to operate at their MPP despite the inevitable changes in the environment. Various methods for maximum power point tracking (MPPT) were developed and finally implemented in solar power electronic controllers to increase the efficiency in the electricity production originate from renewables. In this paper we compare using Matlab tools Simulink, two different MPP tracking methods, which are, fuzzy logic control (FL) and sliding mode control (SMC), considering their efficiency in solar energy production.

Second-Year Results of an Obesity Prevention Program at The Dow Chemical Company

PubMed Central

Roemer, Enid C.; Pei, Xiaofei; Short, Meghan E.; Tabrizi, Maryam J.; Wilson, Mark G.; DeJoy, David M.; Craun, Beth A.; Tully, Karen J.; White, John M.; Baase, Catherine M.

2010-01-01

Objective Evaluate innovative, evidence-based approaches to organizational/supportive environmental interventions aimed at reducing the prevalence of obesity among Dow employees after two years of implementation. Methods A quasi-experimental study design compared outcomes for two levels of intervention intensity to a control group. Propensity scores were used to weight baseline differences between intervention and control subjects. Difference-in-differences methods and multi-level modeling were used to control for individual and site-level confounders. Results Intervention participants maintained their weight and BMI while control participants gained 1.3 pounds and increased their BMI values by 0.2 over two years. Significant differences in blood pressure and cholesterol values were observed when comparing intervention employees to controls. At higher intensity sites, improvements were more pronounced. Conclusions Environmental interventions at the workplace can support weight management and risk reduction after two years. PMID:20190646

Environmental quality

NASA Technical Reports Server (NTRS)

1975-01-01

The potential use of space systems to help determine the current state of air, water, and land environments was examined; the effects of man's activities on these parameters were also examined. Data are limited to pollutants introduced into the major environmental media, environmental changes manifested by such pollutants, and the effectiveness of abatement and control methods. Data also cover land quality as related to land use and public health.

Methods proposed to achieve air quality standards for mobile sources and technology surveillance.

PubMed Central

Piver, W T

1975-01-01

The methods proposed to meet the 1975 Standards of the Clean Air Act for mobile sources are alternative antiknocks, exhaust emission control devices, and alternative engine designs. Technology surveillance analysis applied to this situation is an attempt to anticipate potential public and environmental health problems from these methods, before they happen. Components of this analysis are exhaust emission characterization, environmental transport and transformation, levels of public and environmental exposure, and the influence of economics on the selection of alternative methods. The purpose of this presentation is to show trends as a result of the interaction of these different components. In no manner can these trends be interpreted explicitly as to what will really happen. Such an analysis is necessary so that public and environmental health officials have the opportunity to act on potential problems before they become manifest. PMID:50944

Dissertation Defense Computational Fluid Dynamics Uncertainty Analysis for Payload Fairing Spacecraft Environmental Control Systems

NASA Technical Reports Server (NTRS)

Groves, Curtis Edward

2014-01-01

Spacecraft thermal protection systems are at risk of being damaged due to airflow produced from Environmental Control Systems. There are inherent uncertainties and errors associated with using Computational Fluid Dynamics to predict the airflow field around a spacecraft from the Environmental Control System. This paper describes an approach to quantify the uncertainty in using Computational Fluid Dynamics to predict airflow speeds around an encapsulated spacecraft without the use of test data. Quantifying the uncertainty in analytical predictions is imperative to the success of any simulation-based product. The method could provide an alternative to traditional "validation by test only" mentality. This method could be extended to other disciplines and has potential to provide uncertainty for any numerical simulation, thus lowering the cost of performing these verifications while increasing the confidence in those predictions. Spacecraft requirements can include a maximum airflow speed to protect delicate instruments during ground processing. Computational Fluid Dynamics can be used to verify these requirements; however, the model must be validated by test data. This research includes the following three objectives and methods. Objective one is develop, model, and perform a Computational Fluid Dynamics analysis of three (3) generic, non-proprietary, environmental control systems and spacecraft configurations. Several commercially available and open source solvers have the capability to model the turbulent, highly three-dimensional, incompressible flow regime. The proposed method uses FLUENT, STARCCM+, and OPENFOAM. Objective two is to perform an uncertainty analysis of the Computational Fluid Dynamics model using the methodology found in "Comprehensive Approach to Verification and Validation of Computational Fluid Dynamics Simulations". This method requires three separate grids and solutions, which quantify the error bars around Computational Fluid Dynamics predictions. The method accounts for all uncertainty terms from both numerical and input variables. Objective three is to compile a table of uncertainty parameters that could be used to estimate the error in a Computational Fluid Dynamics model of the Environmental Control System /spacecraft system. Previous studies have looked at the uncertainty in a Computational Fluid Dynamics model for a single output variable at a single point, for example the re-attachment length of a backward facing step. For the flow regime being analyzed (turbulent, three-dimensional, incompressible), the error at a single point can propagate into the solution both via flow physics and numerical methods. Calculating the uncertainty in using Computational Fluid Dynamics to accurately predict airflow speeds around encapsulated spacecraft in is imperative to the success of future missions.

Dissertation Defense: Computational Fluid Dynamics Uncertainty Analysis for Payload Fairing Spacecraft Environmental Control Systems

NASA Technical Reports Server (NTRS)

Groves, Curtis Edward

2014-01-01

Spacecraft thermal protection systems are at risk of being damaged due to airflow produced from Environmental Control Systems. There are inherent uncertainties and errors associated with using Computational Fluid Dynamics to predict the airflow field around a spacecraft from the Environmental Control System. This paper describes an approach to quantify the uncertainty in using Computational Fluid Dynamics to predict airflow speeds around an encapsulated spacecraft without the use of test data. Quantifying the uncertainty in analytical predictions is imperative to the success of any simulation-based product. The method could provide an alternative to traditional validation by test only mentality. This method could be extended to other disciplines and has potential to provide uncertainty for any numerical simulation, thus lowering the cost of performing these verifications while increasing the confidence in those predictions.Spacecraft requirements can include a maximum airflow speed to protect delicate instruments during ground processing. Computational Fluid Dynamics can be used to verify these requirements; however, the model must be validated by test data. This research includes the following three objectives and methods. Objective one is develop, model, and perform a Computational Fluid Dynamics analysis of three (3) generic, non-proprietary, environmental control systems and spacecraft configurations. Several commercially available and open source solvers have the capability to model the turbulent, highly three-dimensional, incompressible flow regime. The proposed method uses FLUENT, STARCCM+, and OPENFOAM. Objective two is to perform an uncertainty analysis of the Computational Fluid Dynamics model using the methodology found in Comprehensive Approach to Verification and Validation of Computational Fluid Dynamics Simulations. This method requires three separate grids and solutions, which quantify the error bars around Computational Fluid Dynamics predictions. The method accounts for all uncertainty terms from both numerical and input variables. Objective three is to compile a table of uncertainty parameters that could be used to estimate the error in a Computational Fluid Dynamics model of the Environmental Control System spacecraft system.Previous studies have looked at the uncertainty in a Computational Fluid Dynamics model for a single output variable at a single point, for example the re-attachment length of a backward facing step. For the flow regime being analyzed (turbulent, three-dimensional, incompressible), the error at a single point can propagate into the solution both via flow physics and numerical methods. Calculating the uncertainty in using Computational Fluid Dynamics to accurately predict airflow speeds around encapsulated spacecraft in is imperative to the success of future missions.

Computational Fluid Dynamics Uncertainty Analysis for Payload Fairing Spacecraft Environmental Control Systems

NASA Technical Reports Server (NTRS)

Groves, Curtis E.

2013-01-01

Spacecraft thermal protection systems are at risk of being damaged due to airflow produced from Environmental Control Systems. There are inherent uncertainties and errors associated with using Computational Fluid Dynamics to predict the airflow field around a spacecraft from the Environmental Control System. This proposal describes an approach to validate the uncertainty in using Computational Fluid Dynamics to predict airflow speeds around an encapsulated spacecraft. The research described here is absolutely cutting edge. Quantifying the uncertainty in analytical predictions is imperative to the success of any simulation-based product. The method could provide an alternative to traditional"validation by test only'' mentality. This method could be extended to other disciplines and has potential to provide uncertainty for any numerical simulation, thus lowering the cost of performing these verifications while increasing the confidence in those predictions. Spacecraft requirements can include a maximum airflow speed to protect delicate instruments during ground processing. Computationaf Fluid Dynamics can be used to veritY these requirements; however, the model must be validated by test data. The proposed research project includes the following three objectives and methods. Objective one is develop, model, and perform a Computational Fluid Dynamics analysis of three (3) generic, non-proprietary, environmental control systems and spacecraft configurations. Several commercially available solvers have the capability to model the turbulent, highly three-dimensional, incompressible flow regime. The proposed method uses FLUENT and OPEN FOAM. Objective two is to perform an uncertainty analysis of the Computational Fluid . . . Dynamics model using the methodology found in "Comprehensive Approach to Verification and Validation of Computational Fluid Dynamics Simulations". This method requires three separate grids and solutions, which quantify the error bars around Computational Fluid Dynamics predictions. The method accounts for all uncertainty terms from both numerical and input variables. Objective three is to compile a table of uncertainty parameters that could be used to estimate the error in a Computational Fluid Dynamics model of the Environmental Control System /spacecraft system. Previous studies have looked at the uncertainty in a Computational Fluid Dynamics model for a single output variable at a single point, for example the re-attachment length of a backward facing step. To date, the author is the only person to look at the uncertainty in the entire computational domain. For the flow regime being analyzed (turbulent, threedimensional, incompressible), the error at a single point can propagate into the solution both via flow physics and numerical methods. Calculating the uncertainty in using Computational Fluid Dynamics to accurately predict airflow speeds around encapsulated spacecraft in is imperative to the success of future missions.

Environmental risk analysis of oil handling facilities in port areas. Application to Tarragona harbor (NE Spain).

PubMed

Valdor, Paloma F; Gómez, Aina G; Puente, Araceli

2015-01-15

Diffuse pollution from oil spills is a widespread problem in port areas (as a result of fuel supply, navigation and loading/unloading activities). This article presents a method to assess the environmental risk of oil handling facilities in port areas. The method is based on (i) identification of environmental hazards, (ii) characterization of meteorological and oceanographic conditions, (iii) characterization of environmental risk scenarios, and (iv) assessment of environmental risk. The procedure has been tested by application to the Tarragona harbor. The results show that the method is capable of representing (i) specific local pollution cases (i.e., discriminating between products and quantities released by a discharge source), (ii) oceanographic and meteorological conditions (selecting a representative subset data), and (iii) potentially affected areas in probabilistic terms. Accordingly, it can inform the design of monitoring plans to study and control the environmental impact of these facilities, as well as the design of contingency plans. Copyright © 2014 Elsevier Ltd. All rights reserved.

Formation of an environmental restoration user group for radiological controls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, R.L.

1993-12-31

An Environmental Restoration User Group for Radiological Controls will be proposed. Article 116 of the Radiological Control Manual encourages contractors to establish informal working associations that promote dialogue among similar facilities. Chem-Nuclear Geotech, Inc., is willing to initially organize and lead a users group to work on common problems, define standard methods, publish a Radiological Work Practices Handbook, and recommend regulatory changes to make environmental restoration programs more cost effective without compromising radiological control. A charter for the users group will be proposed. A questionnaire will be distributed to interested persons to assist in development of focus groups and agendamore » items for the first meeting. The first meeting is planned for May 25-26, 1993, in Grand Junction Colorado. All interested persons are welcome to attend.« less

A simple method for the production of large volume 3D macroporous hydrogels for advanced biotechnological, medical and environmental applications

PubMed Central

Savina, Irina N.; Ingavle, Ganesh C.; Cundy, Andrew B.; Mikhalovsky, Sergey V.

2016-01-01

The development of bulk, three-dimensional (3D), macroporous polymers with high permeability, large surface area and large volume is highly desirable for a range of applications in the biomedical, biotechnological and environmental areas. The experimental techniques currently used are limited to the production of small size and volume cryogel material. In this work we propose a novel, versatile, simple and reproducible method for the synthesis of large volume porous polymer hydrogels by cryogelation. By controlling the freezing process of the reagent/polymer solution, large-scale 3D macroporous gels with wide interconnected pores (up to 200 μm in diameter) and large accessible surface area have been synthesized. For the first time, macroporous gels (of up to 400 ml bulk volume) with controlled porous structure were manufactured, with potential for scale up to much larger gel dimensions. This method can be used for production of novel 3D multi-component macroporous composite materials with a uniform distribution of embedded particles. The proposed method provides better control of freezing conditions and thus overcomes existing drawbacks limiting production of large gel-based devices and matrices. The proposed method could serve as a new design concept for functional 3D macroporous gels and composites preparation for biomedical, biotechnological and environmental applications. PMID:26883390

A method for environmental acoustic analysis improvement based on individual evaluation of common sources in urban areas.

PubMed

López-Pacheco, María G; Sánchez-Fernández, Luis P; Molina-Lozano, Herón

2014-01-15

Noise levels of common sources such as vehicles, whistles, sirens, car horns and crowd sounds are mixed in urban soundscapes. Nowadays, environmental acoustic analysis is performed based on mixture signals recorded by monitoring systems. These mixed signals make it difficult for individual analysis which is useful in taking actions to reduce and control environmental noise. This paper aims at separating, individually, the noise source from recorded mixtures in order to evaluate the noise level of each estimated source. A method based on blind deconvolution and blind source separation in the wavelet domain is proposed. This approach provides a basis to improve results obtained in monitoring and analysis of common noise sources in urban areas. The method validation is through experiments based on knowledge of the predominant noise sources in urban soundscapes. Actual recordings of common noise sources are used to acquire mixture signals using a microphone array in semi-controlled environments. The developed method has demonstrated great performance improvements in identification, analysis and evaluation of common urban sources. © 2013 Elsevier B.V. All rights reserved.

Chemometrics Methods for Specificity, Authenticity and Traceability Analysis of Olive Oils: Principles, Classifications and Applications.

PubMed

Messai, Habib; Farman, Muhammad; Sarraj-Laabidi, Abir; Hammami-Semmar, Asma; Semmar, Nabil

2016-11-17

Olive oils (OOs) show high chemical variability due to several factors of genetic, environmental and anthropic types. Genetic and environmental factors are responsible for natural compositions and polymorphic diversification resulting in different varietal patterns and phenotypes. Anthropic factors, however, are at the origin of different blends' preparation leading to normative, labelled or adulterated commercial products. Control of complex OO samples requires their (i) characterization by specific markers; (ii) authentication by fingerprint patterns; and (iii) monitoring by traceability analysis. These quality control and management aims require the use of several multivariate statistical tools: specificity highlighting requires ordination methods; authentication checking calls for classification and pattern recognition methods; traceability analysis implies the use of network-based approaches able to separate or extract mixed information and memorized signals from complex matrices. This chapter presents a review of different chemometrics methods applied for the control of OO variability from metabolic and physical-chemical measured characteristics. The different chemometrics methods are illustrated by different study cases on monovarietal and blended OO originated from different countries. Chemometrics tools offer multiple ways for quantitative evaluations and qualitative control of complex chemical variability of OO in relation to several intrinsic and extrinsic factors.

Environmental Impacts of Arthropod Biological Control: An Ecological Perspective

USDA-ARS?s Scientific Manuscript database

Arthropod biological control has long been used against insect and mite pests in agriculture production systems, forests, and other natural ecosystems. Depending on the methods of deploying natural enemies and the type of control agents (herbivores, parasitoids, and/or predators), potential environ...

Controlled Vocabulary Service Application for Environmental Data Store

NASA Astrophysics Data System (ADS)

Ji, P.; Piasecki, M.; Lovell, R.

2013-12-01

In this paper we present a controlled vocabulary service application for Environmental Data Store (EDS). The purpose for such application is to help researchers and investigators to archive, manage, share, search, and retrieve data efficiently in EDS. The Simple Knowledge Organization System (SKOS) is used in the application for the representation of the controlled vocabularies coming from EDS. The controlled vocabularies of EDS are created by collecting, comparing, choosing and merging controlled vocabularies, taxonomies and ontologies widely used and recognized in geoscience/environmental informatics community, such as Environment ontology (EnvO), Semantic Web for Earth and Environmental Terminology (SWEET) ontology, CUAHSI Hydrologic Ontology and ODM Controlled Vocabulary, National Environmental Methods Index (NEMI), National Water Information System (NWIS) codes, EPSG Geodetic Parameter Data Set, WQX domain value etc. TemaTres, an open-source, web -based thesaurus management package is employed and extended to create and manage controlled vocabularies of EDS in the application. TemaTresView and VisualVocabulary that work well with TemaTres, are also integrated in the application to provide tree view and graphical view of the structure of vocabularies. The Open Source Edition of Virtuoso Universal Server is set up to provide a Web interface to make SPARQL queries against controlled vocabularies hosted on the Environmental Data Store. The replicas of some of the key vocabularies commonly used in the community, are also maintained as part of the application, such as General Multilingual Environmental Thesaurus (GEMET), NetCDF Climate and Forecast (CF) Standard Names, etc.. The application has now been deployed as an elementary and experimental prototype that provides management, search and download controlled vocabularies of EDS under SKOS framework.

Reducing Environmental Toxicity of Silver Nanoparticles through Shape Control.

PubMed

Gorka, Danielle E; Osterberg, Joshua S; Gwin, Carley A; Colman, Benjamin P; Meyer, Joel N; Bernhardt, Emily S; Gunsch, Claudia K; DiGulio, Richard T; Liu, Jie

2015-08-18

The use of antibacterial silver nanomaterials in consumer products ranging from textiles to toys has given rise to concerns over their environmental toxicity. These materials, primarily nanoparticles, have been shown to be toxic to a wide range of organisms; thus methods and materials that reduce their environmental toxicity while retaining their useful antibacterial properties can potentially solve this problem. Here we demonstrate that silver nanocubes display a lower toxicity toward the model plant species Lolium multiflorum while showing similar toxicity toward other environmentally relevant and model organisms (Danio rerio and Caenorhabditis elegans) and bacterial species (Esherichia coli, Bacillus cereus, and Pseudomonas aeruginosa) compared to quasi-spherical silver nanoparticles and silver nanowires. More specifically, in the L. multiflorum experiments, the roots of silver nanocube treated plants were 5.3% shorter than the control, while silver nanoparticle treated plant roots were 39.6% shorter than the control. The findings here could assist in the future development of new antibacterial products that cause less environmental toxicity after their intended use.

Chemometrics Methods for Specificity, Authenticity and Traceability Analysis of Olive Oils: Principles, Classifications and Applications

PubMed Central

Messai, Habib; Farman, Muhammad; Sarraj-Laabidi, Abir; Hammami-Semmar, Asma; Semmar, Nabil

2016-01-01

Background. Olive oils (OOs) show high chemical variability due to several factors of genetic, environmental and anthropic types. Genetic and environmental factors are responsible for natural compositions and polymorphic diversification resulting in different varietal patterns and phenotypes. Anthropic factors, however, are at the origin of different blends’ preparation leading to normative, labelled or adulterated commercial products. Control of complex OO samples requires their (i) characterization by specific markers; (ii) authentication by fingerprint patterns; and (iii) monitoring by traceability analysis. Methods. These quality control and management aims require the use of several multivariate statistical tools: specificity highlighting requires ordination methods; authentication checking calls for classification and pattern recognition methods; traceability analysis implies the use of network-based approaches able to separate or extract mixed information and memorized signals from complex matrices. Results. This chapter presents a review of different chemometrics methods applied for the control of OO variability from metabolic and physical-chemical measured characteristics. The different chemometrics methods are illustrated by different study cases on monovarietal and blended OO originated from different countries. Conclusion. Chemometrics tools offer multiple ways for quantitative evaluations and qualitative control of complex chemical variability of OO in relation to several intrinsic and extrinsic factors. PMID:28231172

40 CFR 766.18 - Method sensitivity.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Method sensitivity. 766.18 Section 766.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT DIBENZO-PARA-DIOXINS/DIBENZOFURANS General Provisions § 766.18 Method sensitivity. The target level of...

40 CFR 766.18 - Method sensitivity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Method sensitivity. 766.18 Section 766.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT DIBENZO-PARA-DIOXINS/DIBENZOFURANS General Provisions § 766.18 Method sensitivity. The target level of...

40 CFR 766.18 - Method sensitivity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Method sensitivity. 766.18 Section 766.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT DIBENZO-PARA-DIOXINS/DIBENZOFURANS General Provisions § 766.18 Method sensitivity. The target level of...

40 CFR 766.18 - Method sensitivity.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Method sensitivity. 766.18 Section 766.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT DIBENZO-PARA-DIOXINS/DIBENZOFURANS General Provisions § 766.18 Method sensitivity. The target level of...

40 CFR 766.18 - Method sensitivity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Method sensitivity. 766.18 Section 766.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT DIBENZO-PARA-DIOXINS/DIBENZOFURANS General Provisions § 766.18 Method sensitivity. The target level of...

How to make negotiation work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willms, J.R.

The siting of MSW facilities often generates controversy. Environmental negotiation can be a useful method for defusing controversy while allowing community leaders to maintain control of a proposed project. The environmental hearing process is described. The paper than discusses advantages and disadvantages in the context of MSW management and improving the hearing process.

Measurement of semiochemical release rates with a dedicated environmental control system

Treesearch

Heping Zhu; Harold W. Thistle; Christopher M. Ranger; Hongping Zhou; Brian L. Strom

2015-01-01

Insect semiochemical dispensers are commonly deployed under variable environmental conditions over a specified period. Predictions of their longevity are hampered by a lack of methods to accurately monitor and predict how primary variables affect semiochemical release rate. A system was constructed to precisely determine semiochemical release rates under...

Regulatory experience in applying a radiological environmental protection framework for existing and planned nuclear facilities.

PubMed

Mihok, S; Thompson, P

2012-01-01

Frameworks and methods for the radiological protection of non-human biota have been evolving rapidly at the International Commission on Radiological Protection and through various European initiatives. The International Atomic Energy Agency has incorporated a requirement for environmental protection in the latest revision of its Basic Safety Standards. In Canada, the Canadian Nuclear Safety Commission has been legally obligated to prevent unreasonable risk to the environment since 2000. Licensees have therefore been meeting generic legal requirements to demonstrate adequate control of releases of radioactive substances for the protection of both people and biota for many years. In the USA, in addition to the generic requirements of the Environmental Protection Agency and the Nuclear Regulatory Commission, Department of Energy facilities have also had to comply with specific dose limits after a standard assessment methodology was finalised in 2002. Canadian regulators developed a similar framework for biota dose assessment through a regulatory assessment under the Canadian Environmental Protection Act in the late 1990s. Since then, this framework has been applied extensively to satisfy legal requirements under the Canadian Environmental Assessment Act and the Nuclear Safety and Control Act. After approximately a decade of experience in applying these methods, it is clear that simple methods are fit for purpose, and can be used for making regulatory decisions for existing and planned nuclear facilities. Copyright © 2012. Published by Elsevier Ltd.

Can environmental purchasing reduce mercury in U.S. health care?

PubMed Central

Eagan, Patrick D; Kaiser, Barb

2002-01-01

Environmental purchasing represents an innovative approach to mercury control for the health care sector in the United States. The U.S. health care sector creates significant environmental impacts, including the release of toxic substances such as mercury. Our goal in this study was to provide the health care industry with a method of identifying the environmental impacts associated with the products they use. The Health Care Environmental Purchasing Tool (HCEPT) was developed and tested at nine health care facilities in the Great Lakes region of the United States. As a result, more than 1 kg of mercury was removed from four facilities. The complexity of the supply chain inhibits a direct environmental information exchange between health-care decision makers and suppliers. However, a dialogue is starting within the health care supply chain to address environmental issues. The HCEPT has been shown to assist health care facilities with that dialogue by identifying products that have environmental consequences. This promising tool is now available for further experimentation and modification, to facilitate overall environmental improvement, and to provide a systematic method for environmental assessment of health care products. PMID:12204816

An atmosphere protection subsystem in the thermal power station automated process control system

NASA Astrophysics Data System (ADS)

Parchevskii, V. M.; Kislov, E. A.

2014-03-01

Matters concerned with development of methodical and mathematical support for an atmosphere protection subsystem in the thermal power station automated process control system are considered taking as an example the problem of controlling nitrogen oxide emissions at a gas-and-oil-fired thermal power station. The combined environmental-and-economic characteristics of boilers, which correlate the costs for suppressing emissions with the boiler steam load and mass discharge of nitrogen oxides in analytic form, are used as the main tool for optimal control. A procedure for constructing and applying environmental-and-economic characteristics on the basis of technical facilities available in modern instrumentation and control systems is presented.

The impact of environmental pollution on public health expenditure: dynamic panel analysis based on Chinese provincial data.

PubMed

Hao, Yu; Liu, Shuang; Lu, Zhi-Nan; Huang, Junbing; Zhao, Mingyuan

2018-05-01

In recent years, along with rapid economic growth, China's environmental problems have become increasingly prominent. At the same time, the level of China's pollution has been growing rapidly, which has caused huge damages to the residents' health. In this regard, the public health expenditure ballooned as the environmental quality deteriorated in China. In this study, the effect of environmental pollution on residents' health expenditure is empirically investigated by employing the first-order difference generalized method of moments (GMM) method to control for potential endogeneity. Using a panel data of Chinese provinces for the period of 1998-2015, this study found that the environmental pollution (represented by SO 2 and soot emissions) would indeed lead to the increase in the medical expenses of Chinese residents. At the current stage of economic development, an increase in SO 2 and soot emissions per capita would push up the public health expenditure per capita significantly. The estimation results are quite robust for different types of regression specifications and different combinations of control variables. Some social and economic variables such as public services and education may also have remarkable influences on residential medical expenses through different channels.

Systematizing the production of environmental plans: an Australian example

NASA Astrophysics Data System (ADS)

Davis, J. Richard

1985-09-01

Environmental planning legislation in New South Wales now requires local government authorities to draw up statutory plans that take into account, among other concerns, both the biophysical and the social environmental issues within their jurisdictions. The SIRO-PLAN method of plan production provides a systematic mechanism for fulfilling this requirement. This article describes the application of the method by planning researchers over 18 months to the production of a Local Environmental Plan for a rural local government in New South Wales. The policy formulation, the purposive data collection, and the deliberate adjustment of plans in order to recognize interest group requirements were all found to be valuable features of the method, while the translation of the ultimately chosen land-use plan into the explicit regulatory controls available to the local government authority was found to require further refinement. The capacity of SIRO-PLAN to quantify the resolution of competing environmental concerns in the final plan, although of value to planning researchers, proved too arcane for traditionally trained planners.

Temporal Variability of Canopy Light Use Efficiency and its Environmental Controls in a Subtropical Mangrove Wetland

NASA Astrophysics Data System (ADS)

Zhu, X.

2016-12-01

Mangrove wetlands play an important role in global carbon cycle due to their strong carbon sequestration resulting from high plant carbon assimilation and low soil respiration. However, temporal variability of carbon sequestration in mangrove wetlands is less understood since carbon processes of mangrove wetlands are influenced by many complicated and concurrent environmental controls including tidal activities, site climate and soil conditions. Canopy light use efficiency (LUE), is the most important plant physiological parameter that can be used to describe the temporal dynamics of canopy photosynthesis, and therefore a better characterization of temporal variability of canopy LUE will improve our understanding in mangrove photosynthesis and carbon balance. One of our aims is to study the temporal variability of canopy LUE and its environmental controls in a subtropical mangrove wetland. Half-hourly canopy LUE is derived from eddy covariance (EC) carbon flux and photosynthesis active radiation observations, and half-hourly environmental controls we measure include temperature, humidity, precipitation, radiation, tidal height, salinity, etc. Another aim is to explore the links between canopy LUE and spectral indices derived from near-surface tower-based remote sensing (normalized difference vegetation index, enhanced vegetation index, photochemical reflectance index, solar-induced chlorophyll fluorescence, etc.), and then identify potential quantitative relationships for developing remote sensing-based estimation methods of canopy LUE. At present, some instruments in our in-situ observation system have not yet been installed (planned in next months) and therefore we don't have enough measurements to support our analysis. However, a preliminary analysis of our historical EC and climate observations in past several years indicates that canopy LUE shows strong temporal variability and is greatly affected by environmental factors such as tidal activity. Detailed and systematic analyses of temporal variability of canopy LUE and its environmental controls and potential remote sensing estimation methods will be conducted when our in-situ observation system is ready in near future.

Chapter 19: HVAC Controls (DDC/EMS/BAS) Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Romberger, Jeff

The HVAC Controls Evaluation Protocol is designed to address evaluation issues for direct digital controls/energy management systems/building automation systems (DDC/EMS/BAS) that are installed to control heating, ventilation, and air-conditioning (HVAC) equipment in commercial and institutional buildings. (This chapter refers to the DDC/EMS/BAS measure as HVAC controls.) This protocol may also be applicable to industrial facilities such as clean rooms and labs, which have either significant HVAC equipment or spaces requiring special environmental conditions.

77 FR 58309 - Approval and Promulgation of Implementation Plans; State of Missouri

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

....040 Reference Methods, and 10 CSR 10-6.130 Controlling Emissions During Episodes of High Air Pollution... determined. The revisions to 10 CSR 10-6.130 Controlling Emissions During Episodes of High Air Pollution... Part 52 Environmental protection, Air pollution control, Carbon monoxide, Incorporation by reference...

Cost-effectiveness of environmental management for vector control in resource development projects.

PubMed

Bos, R

1991-01-01

Vector control methods are traditionally divided in chemical, biological and environmental management approaches, and this distinction also reflected in certain financial and economic aspects. This is particularly true for environmental modification, usually engineering or other structural works. It is highly capital intensive, as opposed to chemical and biological control which require recurrent expenditures, and discount rates are therefore a prominent consideration in deciding for one or the other approach. Environmental manipulation requires recurrent action, but can often be carried out with the community participation, which raises the issue of opportunity costs. The incorporation of environmental management in resource projects is generally impeded by economic considerations. The Internal Rate of Return continues to be a crucial criterion for funding agencies and development banks to support new projects; at the same time Governments of debt-riden countries in the Third World will do their best to avoid additional loans on such frills as environmental and health safeguards. Two approaches can be recommended to nevertheless ensure the incorporation of environmental management measures in resource projects in an affordable way. First, there are several examples of cases where environmental management measures either have a dual benefit (increasing both agricultural production and reducing vector-borne disease transmission) or can be implemented at zero costs. Second, the additional costs involved in structural modifications can be separated from the project development costs considered in the calculations of the Internal Rate of Return, and financial support can be sought from bilateral technical cooperation agencies particularly interested in environmental and health issues. There is a dearth of information in the cost-effectiveness of alternative vector control strategies in the developing country context. The process of integrating vector control in the general health services will make it even more difficult to gain a clear insight in the matter.

Evaluation of environmental sampling methods for detection of Salmonella enterica in a large animal veterinary hospital.

PubMed

Goeman, Valerie R; Tinkler, Stacy H; Hammac, G Kenitra; Ruple, Audrey

2018-04-01

Environmental surveillance for Salmonella enterica can be used for early detection of contamination; thus routine sampling is an integral component of infection control programs in hospital environments. At the Purdue University Veterinary Teaching Hospital (PUVTH), the technique regularly employed in the large animal hospital for sample collection uses sterile gauze sponges for environmental sampling, which has proven labor-intensive and time-consuming. Alternative sampling methods use Swiffer brand electrostatic wipes for environmental sample collection, which are reportedly effective and efficient. It was hypothesized that use of Swiffer wipes for sample collection would be more efficient and less costly than the use of gauze sponges. A head-to-head comparison between the 2 sampling methods was conducted in the PUVTH large animal hospital and relative agreement, cost-effectiveness, and sampling efficiency were compared. There was fair agreement in culture results between the 2 sampling methods, but Swiffer wipes required less time and less physical effort to collect samples and were more cost-effective.

Controls on project proponents and environmental impact assessment effectiveness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortolano, L.

The degree of effectiveness of environmental impact assessment (EIA) for particular projects is associated with the existence of mechanisms of organizational control. Five dimensions of EIA effectiveness are considered: procedural compliance, completeness of EIA documents, methods to assess impacts, influence on project decisions, and weight given to environmental factors. Six mechanisms of control are introduced and illustrated by programs and projects in several countries. Experience in the Philippines under President Marcos demonstrates that procedural control in the form of EIA regulations, when used without other control mechanisms, will lead at most to token compliance. Judicial control, as practiced in themore » US, yields high procedural compliance. Evaluative control can yield effective EIA, but some systems based on this form of control treat only a small fraction of the major projects proposed. Both control exerted by development assistance organizations and control by professionals have great potential for yielding effective EIA, but that potential has not been fully realized. Control exerted directly by citizens or agencies not otherwise involved in EIA is uncommon, but cases from Taiwan demonstrate that those controls can be significant. An understanding of relationships between control mechanisms and EIA effectiveness is useful in designing EIA policies and programs.« less

Multi-metal oxide ceramic nanomaterial

DOEpatents

O'Brien, Stephen; Liu, Shuangyi; Huang, Limin

2016-06-07

A convenient and versatile method for preparing complex metal oxides is disclosed. The method uses a low temperature, environmentally friendly gel-collection method to form a single phase nanomaterial. In one embodiment, the nanomaterial consists of Ba.sub.AMn.sub.BTi.sub.CO.sub.D in a controlled stoichiometry.

Electric and hybrid vehicles environmental control subsystem study

NASA Technical Reports Server (NTRS)

1981-01-01

An environmental control subsystem (ECS) in the passenger compartment of electric and hybrid vehicles is studied. Various methods of obtaining the desired temperature control for the battery pack is also studied. The functional requirements of ECS equipment is defined. Following categorization by methodology, technology availability and risk, all viable ECS concepts are evaluated. Each is assessed independently for benefits versus risk, as well as for its feasibility to short, intermediate and long term product development. Selection of the preferred concept is made against these requirements, as well as the study's major goal of providing safe, highly efficient and thermally confortable ECS equipment.

Assessing DNA recovery from chewing gum.

PubMed

Eychner, Alison M; Schott, Kelly M; Elkins, Kelly M

2017-01-01

The purpose of this study was to evaluate which DNA extraction method yields the highest quantity of DNA from chewing gum. In this study, several popular extraction methods were tested, including Chelex-100, phenol-chloroform-isoamyl alcohol (PCIA), DNA IQ, PrepFiler, and QIAamp Investigator, and the quantity of DNA recovered from chewing gum was determined using real-time polymerase chain reaction with Quantifiler. Chewed gum control samples were submitted by anonymous healthy adult donors, and discarded environmental chewing gum samples simulating forensic evidence were collected from outside public areas (e.g., campus bus stops, streets, and sidewalks). As expected, results indicate that all methods tested yielded sufficient amplifiable human DNA from chewing gum using the wet-swab method. The QIAamp performed best when DNA was extracted from whole pieces of control gum (142.7 ng on average), and the DNA IQ method performed best on the environmental whole gum samples (29.0 ng on average). On average, the QIAamp kit also recovered the most DNA from saliva swabs. The PCIA method demonstrated the highest yield with wet swabs of the environmental gum (26.4 ng of DNA on average). However, this method should be avoided with whole gum samples (no DNA yield) due to the action of the organic reagents in dissolving and softening the gum and inhibiting DNA recovery during the extraction.

Association between environmental factors including second-hand smoke and primary lung cancer in dogs.

PubMed

Zierenberg-Ripoll, A; Pollard, R E; Stewart, S L; Allstadt, S D; Barrett, L E; Gillem, J M; Skorupski, K A

2018-06-01

To estimate prevalence of exposure to environmental tobacco smoke and other environmental toxins in dogs with primary lung tumours and to analyse association between exposure and lung tumour development. In this case-control study, an owner survey was developed to collect data on patient characteristics, general health care and environmental exposures. Dogs diagnosed with primary lung carcinomas formed the Case group. Dogs diagnosed with mast cell tumours served as Control Group 1 and dogs diagnosed with neurologic disease served as Control Group 2. Associations between diagnosis of primary lung tumour and patient and environmental exposure variables were analysed using bivariate and multivariate statistical methods. A total of 1178 owner surveys were mailed and 470 surveys were returned and included in statistical analysis, including 135 Cases, 169 dogs in Control Group 1 and 166 dogs in Control Group 2. An association between exposure to second-hand smoke and prevalence of primary lung cancer was not identified in this study. Second-hand smoke is associated with primary lung cancer in people but a definitive association has not been found in dogs. The results of this study suggest that tobacco smoke exposure may not be associated with primary lung cancer development in dogs but study limitations may have precluded detection of an association. © 2017 British Small Animal Veterinary Association.

Environmental damage schedules: community judgments of importance and assessments of losses

Treesearch

Ratana Chuenpagdee; Jack L. Knetsch; Thomas C. Brown

2001-01-01

Available methods of valuing environmental changes are often limited in their applicability to current issues such as damage assessment and implementing regulatory controls, or may otherwise not provide reliable readings of community preferences. An alternative is to base decisions on predetermined fixed schedules of sanctions, restrictions, damage awards, and other...

Evaluation of Alkaline Cleaner Materials

NASA Technical Reports Server (NTRS)

Partz, Earl

1998-01-01

Alkaline cleaners used to process aluminum substrates have contained chromium as the corrosion inhibitor. Chromium is a hazardous substance whose use and control are described by environmental laws. Replacement materials that have the characteristics of chromated alkaline cleaners need to be found that address both the cleaning requirements and environmental impacts. This report will review environmentally friendly candidates evaluated as non-chromium alkaline cleaner replacements and methods used to compare those candidates one versus another. The report will also list characteristics used to select candidates based on their declared contents. It will also describe and evaluate methods used to discriminate among the large number of prospective candidates.

Validation of minicams for measuring concentrations of chemical agent in environmental air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menton, R.G.; Hayes, T.L.; Chou, Y.L.

1993-05-13

Environmental monitoring for chemical agents is necessary to ensure that notification and appropriate action will be taken in the, event that there is a release exceeding control limits of such agents into the workplace outside of engineering controls. Prior to implementing new analytical procedures for environmental monitoring, precision and accuracy (PA) tests are conducted to ensure that an agent monitoring system performs according to specified accuracy, precision, and sensitivity requirements. This testing not only establishes the accuracy and precision of the method, but also determines what factors can affect the method's performance. Performance measures that are particularly important in agentmore » monitoring include the Detection Limit (DL), Decision Limit (DC), Found Action Level (FAL), and the Target Action Level (TAL). PA experiments were performed at Battelle's Medical Research and Evaluation Facility (MREF) to validate the use of the miniature chemical agent monitoring system (MINICAMs) for measuring environmental air concentrations of sulfur mustard (HD). This presentation discusses the experimental and statistical approaches for characterizing the performance of MINICAMS for measuring HD in air.« less

Detecting regulatory gene-environment interactions with unmeasured environmental factors.

PubMed

Fusi, Nicoló; Lippert, Christoph; Borgwardt, Karsten; Lawrence, Neil D; Stegle, Oliver

2013-06-01

Genomic studies have revealed a substantial heritable component of the transcriptional state of the cell. To fully understand the genetic regulation of gene expression variability, it is important to study the effect of genotype in the context of external factors such as alternative environmental conditions. In model systems, explicit environmental perturbations have been considered for this purpose, allowing to directly test for environment-specific genetic effects. However, such experiments are limited to species that can be profiled in controlled environments, hampering their use in important systems such as human. Moreover, even in seemingly tightly regulated experimental conditions, subtle environmental perturbations cannot be ruled out, and hence unknown environmental influences are frequent. Here, we propose a model-based approach to simultaneously infer unmeasured environmental factors from gene expression profiles and use them in genetic analyses, identifying environment-specific associations between polymorphic loci and individual gene expression traits. In extensive simulation studies, we show that our method is able to accurately reconstruct environmental factors and their interactions with genotype in a variety of settings. We further illustrate the use of our model in a real-world dataset in which one environmental factor has been explicitly experimentally controlled. Our method is able to accurately reconstruct the true underlying environmental factor even if it is not given as an input, allowing to detect genuine genotype-environment interactions. In addition to the known environmental factor, we find unmeasured factors involved in novel genotype-environment interactions. Our results suggest that interactions with both known and unknown environmental factors significantly contribute to gene expression variability. and implementation: Software available at http://pmbio.github.io/envGPLVM/. Supplementary data are available at Bioinformatics online.

In Their Own Words: The Significance of Participant Perceptions in Assessing Entomology Citizen Science Learning Outcomes Using a Mixed Methods Approach

PubMed Central

Lynch, Louise I.; Dauer, Jenny M.; Babchuk, Wayne A.; Heng-Moss, Tiffany

2018-01-01

A mixed methods study was used to transcend the traditional pre-, post-test approach of citizen science evaluative research by integrating adults’ test scores with their perceptions. We assessed how contributory entomology citizen science affects participants’ science self-efficacy, self-efficacy for environmental action, nature relatedness and attitude towards insects. Pre- and post-test score analyses from citizen scientists (n = 28) and a control group (n = 72) were coupled with interviews (n = 11) about science experiences and entomological interactions during participation. Considering quantitative data alone, no statistically significant changes were evident in adults following participation in citizen science when compared to the control group. Citizen scientists’ pre-test scores were significantly higher than the control group for self-efficacy for environmental action, nature relatedness and attitude towards insects. Interview data reveal a notable discrepancy between measured and perceived changes. In general, citizen scientists had an existing, long-term affinity for the natural world and perceived increases in their science self-efficacy, self-efficacy for environmental action, nature relatedness and attitude towards insects. Perceived influences may act independently of test scores. Scale instruments may not show impacts with variances in individual’s prior knowledge and experiences. The value of mixed methods on citizen science program evaluation is discussed. PMID:29415522

In Their Own Words: The Significance of Participant Perceptions in Assessing Entomology Citizen Science Learning Outcomes Using a Mixed Methods Approach.

PubMed

Lynch, Louise I; Dauer, Jenny M; Babchuk, Wayne A; Heng-Moss, Tiffany; Golick, Doug

2018-02-06

A mixed methods study was used to transcend the traditional pre-, post-test approach of citizen science evaluative research by integrating adults' test scores with their perceptions. We assessed how contributory entomology citizen science affects participants' science self-efficacy, self-efficacy for environmental action, nature relatedness and attitude towards insects. Pre- and post-test score analyses from citizen scientists ( n = 28) and a control group ( n = 72) were coupled with interviews ( n = 11) about science experiences and entomological interactions during participation. Considering quantitative data alone, no statistically significant changes were evident in adults following participation in citizen science when compared to the control group. Citizen scientists' pre-test scores were significantly higher than the control group for self-efficacy for environmental action, nature relatedness and attitude towards insects. Interview data reveal a notable discrepancy between measured and perceived changes. In general, citizen scientists had an existing, long-term affinity for the natural world and perceived increases in their science self-efficacy, self-efficacy for environmental action, nature relatedness and attitude towards insects. Perceived influences may act independently of test scores. Scale instruments may not show impacts with variances in individual's prior knowledge and experiences. The value of mixed methods on citizen science program evaluation is discussed.

Using Hydrologic Modeling to Screen Potential Environmental Management Methods for Malaria Vector Control in Niger

NASA Astrophysics Data System (ADS)

Gianotti, R. L.; Bomblies, A.; Eltahir, E. A.

2008-12-01

This study describes the use of HYDREMATS, a physically-based distributed hydrology model, to investigate environmental management methods for malaria vector control in the Sahelian village of Banizoumbou, Niger. The model operates at fine spatial and temporal scales to enable explicit simulation of individual pool dynamics and isolation of mosquito breeding habitats. The results showed that leveling of topographic depressions where temporary breeding habitats form during the rainy season could reduce the persistence time of a pool to less than the time needed for establishment of mosquito breeding, approximately 7 days. Increasing the surface soil permeability by ploughing could also reduce the persistence time of a pool but this technique was not as effective as leveling. Therefore it is considered that leveling should be the preferred of the two options where possible. This investigation demonstrates that management methods that modify the hydrologic environment have significant potential to contribute to malaria vector control and human health improvement in Sahelian Africa.

Hydrologic modeling to screen potential environmental management methods for malaria vector control in Niger

NASA Astrophysics Data System (ADS)

Gianotti, Rebecca L.; Bomblies, Arne; Eltahir, Elfatih A. B.

2009-08-01

This paper describes the first use of Hydrology-Entomology and Malaria Transmission Simulator (HYDREMATS), a physically based distributed hydrology model, to investigate environmental management methods for malaria vector control in the Sahelian village of Banizoumbou, Niger. The investigation showed that leveling of topographic depressions where temporary breeding habitats form during the rainy season, by altering pool basin microtopography, could reduce the pool persistence time to less than the time needed for establishment of mosquito breeding, approximately 7 days. Undertaking soil surface plowing can also reduce pool persistence time by increasing the infiltration rate through an existing pool basin. Reduction of the pool persistence time to less than the rainfall interstorm period increases the frequency of pool drying events, removing habitat for subadult mosquitoes. Both management approaches could potentially be considered within a given context. This investigation demonstrates that management methods that modify the hydrologic environment have significant potential to contribute to malaria vector control in water-limited, Sahelian Africa.

Methods to Calculate the Heat Index as an Exposure Metric in Environmental Health Research

PubMed Central

Bell, Michelle L.; Peng, Roger D.

2013-01-01

Background: Environmental health research employs a variety of metrics to measure heat exposure, both to directly study the health effects of outdoor temperature and to control for temperature in studies of other environmental exposures, including air pollution. To measure heat exposure, environmental health studies often use heat index, which incorporates both air temperature and moisture. However, the method of calculating heat index varies across environmental studies, which could mean that studies using different algorithms to calculate heat index may not be comparable. Objective and Methods: We investigated 21 separate heat index algorithms found in the literature to determine a) whether different algorithms generate heat index values that are consistent with the theoretical concepts of apparent temperature and b) whether different algorithms generate similar heat index values. Results: Although environmental studies differ in how they calculate heat index values, most studies’ heat index algorithms generate values consistent with apparent temperature. Additionally, most different algorithms generate closely correlated heat index values. However, a few algorithms are potentially problematic, especially in certain weather conditions (e.g., very low relative humidity, cold weather). To aid environmental health researchers, we have created open-source software in R to calculate the heat index using the U.S. National Weather Service’s algorithm. Conclusion: We identified 21 separate heat index algorithms used in environmental research. Our analysis demonstrated that methods to calculate heat index are inconsistent across studies. Careful choice of a heat index algorithm can help ensure reproducible and consistent environmental health research. Citation: Anderson GB, Bell ML, Peng RD. 2013. Methods to calculate the heat index as an exposure metric in environmental health research. Environ Health Perspect 121:1111–1119; http://dx.doi.org/10.1289/ehp.1206273 PMID:23934704

A comparison between self-reported and GIS-based proxies of residential exposure to environmental pollution in a case-control study on lung cancer.

PubMed

Cordioli, M; Ranzi, A; Freni Sterrantino, A; Erspamer, L; Razzini, G; Ferrari, U; Gatti, M G; Bonora, K; Artioli, F; Goldoni, C A; Lauriola, P

2014-06-01

In epidemiological studies both questionnaire results and GIS modeling have been used to assess exposure to environmental risk factors. Nevertheless, few studies have used both these techniques to evaluate the degree of agreement between different exposure assessment methodologies. As part of a case-control study on lung cancer, we present a comparison between self-reported and GIS-derived proxies of residential exposure to environmental pollution. 649 subjects were asked to fill out a questionnaire and give information about residential history and perceived exposure. Using GIS, for each residence we evaluated land use patterns, proximity to major roads and exposure to industrial pollution. We then compared the GIS exposure-index values among groups created on the basis of questionnaire responses. Our results showed a relatively high agreement between the two methods. Although none of these methods is the "exposure gold standard", understanding similarities, weaknesses and strengths of each method is essential to strengthen epidemiological evidence. Copyright © 2014 Elsevier Ltd. All rights reserved.

Speedy fabrication of diameter-controlled Ag nanowires using glycerolunder microwave irradiation conditions

EPA Science Inventory

Diameter-controlled Ag nanowires were rapidly fabricated (1 min) using inexpensive, abundant, and environmentally-friendly glycerol as both reductant and solvent under non-stirred microwave irradiation conditions; no Ag particles were formed using conventional heating methods. Th...

Lawn and Turf Pest Control: A Guide for Commercial Applicators.

ERIC Educational Resources Information Center

Khan, M. S.

This manual is designed for use in training commercial pesticide applicators. It gives identification and control information for common lawn and turf diseases, insects, nematodes, weeds, and vertebrate pests. It also discusses phytotoxicity, environmental concerns, and application methods. (BB)

Forest Pest Control. Sale Publication 4072.

ERIC Educational Resources Information Center

Stimmann, M. W., Ed.

The forest pests discussed in this guide are weeds, insects, diseases, and vertebrates. The guide gives information about types of forests, characteristics of common forest pests, pest control methods, pesticides and application equipment used in forestry, and environmental and human hazards. (Author/BB)

7 CFR 3201.8 - Determining life cycle costs, environmental and health benefits, and performance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions”; (2) D5864“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants...“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components...

7 CFR 3201.8 - Determining life cycle costs, environmental and health benefits, and performance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions”; (2) D5864“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants...“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components...

7 CFR 3201.8 - Determining life cycle costs, environmental and health benefits, and performance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions”; (2) D5864“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants...“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components...

Manipulations of the reproductive system of fishes by means of exogenous chemicals

USGS Publications Warehouse

Patino, R.

1997-01-01

Environmental control of reproductive activity of captive fish is feasible (or potentially feasible) but, with few exceptions, is currently impractical for most species. Therefore, chemical methods of manipulating reproductive activity continue to be widely used in fish production operations worldwide. However, the control of fish reproduction in captivity cannot be exercised without regard to adequate environmental conditions, which can differ markedly for different species. This review provides a synopsis of relevant aspects of fish reproductive physiology and addresses current and promising future chemical methods of sex control, gonadal recrudescence, and spawning. Most research on the control of reproduction in fishes has focused on female physiology because ovarian development and maturation are easily disturbed by environmental stressors. Control of sex ratios by steroid treatment has become a well-established technique for several fish species, but the technique continues to be problematic in some cases. Final gonadal growth and spawning usually can be achieved by implant treatment with gonadotropin-releasing hormone analogs (GnRHa), which in some species have to be applied in combination with dopamine antagonists to enhance responsiveness to GnRHa. However, efforts to accelerate gonadal recrudescence and maturational competence by chemical means have yielded mixed results, reflecting a relative lack of understanding of the basic physiological and biochemic mechanisms controlling these processes. The potential benefits of using reproductive pheromone, to manipulate gonadal development and spawning has been demonstrated in a few species, but further research is needed to determine whether this technique is applicable to fish culture. Because a reliable supply of young fish is critical for the expansion and diversification of fish culture operations, the use of chemicals in combination with adequate environmental conditions to contain gametogenesis and spawning in fishes will continue to be an important tool for the fish culture.

High Throughput Determination of VX in Drinking Water by ...

EPA Pesticide Factsheets

Methods Report This document provides the standard operating procedure for determination of the chemical warfare agent VX (O-Ethyl S-2-Diisopropylamino-Ethyl Methylphosphonothioate) in drinking water by isotope dilution liquid chromatography tandem mass spectrometer (LC/MS/MS). This method was adapted from one that was initially developed by the Centers for Disease Control and Prevention, in the National Center for Environmental Health for the determination and quantitation of VX in aqueous matrices. This method is designed to support site-specific cleanup goals of environmental remediation activities following a homeland security incident involving this analyte.

Assessment of Hair Aluminum, Lead, and Mercury in a Sample of Autistic Egyptian Children: Environmental Risk Factors of Heavy Metals in Autism

PubMed Central

Mohamed, Farida El Baz; Zaky, Eman Ahmed; El-Sayed, Adel Bassuoni; Elhossieny, Reham Mohammed; Zahra, Sally Soliman; Salah Eldin, Waleed; Youssef, Walaa Yousef; Khaled, Rania Abdelmgeed; Youssef, Azza Mohamed

2015-01-01

Background and Aims. The etiological factors involved in the etiology of autism remain elusive and controversial, but both genetic and environmental factors have been implicated. The aim of this study was to assess the levels and possible environmental risk factors and sources of exposure to mercury, lead, and aluminum in children with autism spectrum disorder (ASD) as compared to their matched controls. Methods. One hundred ASD children were studied in comparison to 100 controls. All participants were subjected to clinical evaluation and measurement of mercury, lead, and aluminum through hair analysis which reflects past exposure. Results. The mean Levels of mercury, lead, and aluminum in hair of the autistic patients were significantly higher than controls. Mercury, lead, and aluminum levels were positively correlated with maternal fish consumptions, living nearby gasoline stations, and the usage of aluminum pans, respectively. Conclusion. Levels of mercury, lead, and aluminum in the hair of autistic children are higher than controls. Environmental exposure to these toxic heavy metals, at key times in development, may play a causal role in autism. PMID:26508811

Pest Control in the School Environment: Adopting Integrated Pest Management.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Pesticide Programs.

As the public becomes more aware of the health and environmental risks pesticides may pose, its interest in seeking the use of equally effective alternative pest control methods increases. School administrators and other persons who have pest control decision-making responsibilities for school buildings and grounds can use this guide to become…

Internet of Things technology-based management methods for environmental specimen banks.

PubMed

Peng, Lihong; Wang, Qian; Yu, Ang

2015-02-01

The establishment and management of environmental specimen banks (ESBs) has long been a problem worldwide. The complexity of specimen environment has made the management of ESB likewise complex. Through an analysis of the development and management of ESBs worldwide and in light of the sophisticated Internet of Things (IOT) technology, this paper presents IOT technology-based ESB management methods. An IOT technology-based ESB management system can significantly facilitate ESB ingress and egress management as well as long-term storage management under quality control. This paper elaborates on the design of IOT technology-based modules, which can be used in ESB management to achieve standardized, smart, information-based ESB management. ESB management has far-reaching implications for environmental management and for research in environmental science.

A cost-analysis of complex workplace nutrition education and environmental dietary modification interventions.

PubMed

Fitzgerald, Sarah; Kirby, Ann; Murphy, Aileen; Geaney, Fiona; Perry, Ivan J

2017-01-09

The workplace has been identified as a priority setting to positively influence individuals' dietary behaviours. However, a dearth of evidence exists regarding the costs of implementing and delivering workplace dietary interventions. This study aimed to conduct a cost-analysis of workplace nutrition education and environmental dietary modification interventions from an employer's perspective. Cost data were obtained from a workplace dietary intervention trial, the Food Choice at Work Study. Micro-costing methods estimated costs associated with implementing and delivering the interventions for 1 year in four multinational manufacturing workplaces in Cork, Ireland. The workplaces were allocated to one of the following groups: control, nutrition education alone, environmental dietary modification alone and nutrition education and environmental dietary modification combined. A total of 850 employees were recruited across the four workplaces. For comparison purposes, total costs were standardised for 500 employees per workplace. The combined intervention reported the highest total costs of €31,108. The nutrition education intervention reported total costs of €28,529. Total costs for the environmental dietary modification intervention were €3689. Total costs for the control workplace were zero. The average annual cost per employee was; combined intervention: €62, nutrition education: €57, environmental modification: €7 and control: €0. Nutritionist's time was the main cost contributor across all interventions, (ranging from 53 to 75% of total costs). Within multi-component interventions, the relative cost of implementing and delivering nutrition education elements is high compared to environmental modification strategies. A workplace environmental modification strategy added marginal additional cost, relative to the control. Findings will inform employers and public health policy-makers regarding the economic feasibility of implementing and scaling dietary interventions. Current Controlled Trials: ISRCTN35108237 . Date of registration: The trial was retrospectively registered on 02/07/2013.

[Characterization of the training and practice of human talent working in environmental health in Colombia].

PubMed

Agudelo-Calderón, Carlos A; García-Ubaque, Juan C; Robledo-Martínez, Rocío; García-Ubaque, Cesar A; Vaca, Martha L

2015-07-01

Objectives To characterize the peculiarities in the training, exercise, and performance of human talent working in environmental health in Colombia. Method Documentary and database reviews. Surveys and semi-structured interviews. Results Approximately 70 % of professionals in the area of environmental health work in health management, food engineering, environmental engineering, sanitary engineering, veterinary medicine, and pharmaceutical chemistry. 63 % of technologists belong to the field of sanitation technology. Only 20 % of surveyed educational institutions apply the competence approach to training to their students and the identification of occupational characteristics in the labor market is only used at the undergraduate level as a criterion of academic analysis and design. Only 20 % of educational institutions identify educational trends in Colombian and or international environmental health as a contribution to their programs. In prospective practices, the following topics to be strengthened were identified: risk factor identfication, measurement, and control; design and implementation of mechanisms for controlling environmental risks; forms of interdisciplinary work between the natural, social and health sciences; preventative and environmental protection measures and the concept of environment (natural, social, and cultural). Conclusion The human talent currently working in environmental health in the country is concentrated in primary care activities (inspection, monitoring and control) and a large spread exists in mission processes and competences, both professionally and technologically. A lack of coordination between the environmental sector and the education sector can be observed. A great diversity exists among the profiles offered by the different educational programs related to environmental health.

Offspring ADHD as a Risk Factor for Parental Marital Problems: Controls for Genetic and Environmental Confounds

PubMed Central

Schermerhorn, Alice C.; D’Onofrio, Brian M.; Slutske, Wendy S.; Emery, Robert E.; Turkheimer, Eric; Harden, K. Paige; Heath, Andrew C.; Martin, Nicholas G.

2013-01-01

Background Previous studies have found that child attention-deficit/hyperactivity disorder (ADHD) is associated with more parental marital problems. The reasons for this association are unclear, however. The association might be due to genetic or environmental confounds that contribute to both marital problems and ADHD. Method Data were drawn from the Australian Twin Registry, including 1296 individual twins, their spouses, and offspring. We studied adult twins who were discordant for offspring ADHD. Using a discordant twin pairs design, we examined the extent to which genetic and environmental confounds, as well as measured parental and offspring characteristics, explain the ADHD-marital problems association. Results Offspring ADHD predicted parental divorce and marital conflict. The associations were also robust when comparing differentially exposed identical twins to control for unmeasured genetic and environmental factors, when controlling for measured maternal and paternal psychopathology, when restricting the sample based on timing of parental divorce and ADHD onset, and when controlling for other forms of offspring psychopathology. Each of these controls rules out alternative explanations for the association. Conclusion The results of the current study converge with those of prior research in suggesting that factors directly associated with offspring ADHD increase parental marital problems. PMID:22958575

Effect of government actions on technological innovation for SO2 control.

PubMed

Taylor, Margaret R; Rubin, Edward S; Hounshell, David A

2003-10-15

The relationship between government actions and innovation in environmental control technology is important for the design of cost-effective policies to achieve environmental goals. This paper examines such relationships for the case of sulfur dioxide control technology for U.S. coal-fired power plants. The study employs several complementary research methods, including analyses of key government actions, technology patenting activity, technology performance and cost trends, knowledge transfer activities, and expert elicitations. Our results indicate that government regulation appears to be a greater stimulus to inventive activity than government-sponsored research support alone, and that the anticipation of regulation also spurs inventive activity. Regulatory stringency focuses this activity along particular technical pathways and is a key factor in creating markets for environmental technologies. We also find that with greater technology adoption, both new and existing systems experience notable efficiency improvements and capital cost reductions. The important role of government in fostering knowledge transfer via technical conferences and other measures is also seen as an important factor in promoting environmental technology innovation.

Clock genes explain large proportion of phenotypic variance in systolic blood pressure and this control is not modified by environmental temperature

USDA-ARS?s Scientific Manuscript database

BACKGROUND: Diurnal variation in blood pressure (BP) is regulated, in part, by an endogenous circadian clock; however, few human studies have identified associations between clock genes and BP. Accounting for environmental temperature may be necessary to correct for seasonal bias. METHODS: We examin...

Effects of a Worksite Weight-Control Programme in Obese Male Workers: A Randomized Controlled Crossover Trial

ERIC Educational Resources Information Center

Iriyama, Yae; Murayama, Nobuko

2014-01-01

Objective: We conducted a randomized controlled crossover trial to evaluate the effects of a new worksite weight-control programme designed for men with or at risk of obesity using a combination of nutrition education and nutrition environmental interventions. Subjects and methods: Male workers with or at risk of obesity were recruited for this…

Emerging science in the dietary control and prevention of dental caries.

PubMed

Al-Dajani, Mahmoud; Limeback, Hardy

2012-10-01

The key environmental factor involved in caries incidence is fermentable carbohydrates. Because of the high costs of caries treatment, researchers continue to explore dietary control as a promising preventive method. While dietary change has been demonstrated to reduce Streptococcus mutans, a preventive role is expected for "functional foods" and dietary habit alterations. The authors consider how recent advances in the understanding of caries pathology can reveal dietary control as a valuable method in promoting a healthy dentition.

Environmental Assessment of Lead at Camp Edwards, Massachusetts, Small Arms Ranges

DTIC Science & Technology

2007-08-01

phosphates in soils as a method to immobilize lead. Environmental Science and Technology. 28(4):646–654. Rühling, A., and G. Tyler. 1973. Heavy metal ...control of heavy metals in a sandy soil . Environmental Science and Technology. 36(22):4804– 4810. Xia, K., W. Bleam, and P. A. Helmke. 1997. Studies...Military Training Sources of Lead and Soil Distribution at Camp Edwards ..............38 3.3 Projects Specific to Camp Edwards Small Arms Ranges

Restaurant outbreak of Legionnaires' disease associated with a decorative fountain: an environmental and case-control study

PubMed Central

O'Loughlin, Rosalyn E; Kightlinger, Lon; Werpy, Matthew C; Brown, Ellen; Stevens, Valerie; Hepper, Clark; Keane, Tim; Benson, Robert F; Fields, Barry S; Moore, Matthew R

2007-01-01

Background From June to November 2005, 18 cases of community-acquired Legionnaires' disease (LD) were reported in Rapid City South Dakota. We conducted epidemiologic and environmental investigations to identify the source of the outbreak. Methods We conducted a case-control study that included the first 13 cases and 52 controls randomly selected from emergency department records and matched on underlying illness. We collected information about activities of case-patients and controls during the 14 days before symptom onset. Environmental samples (n = 291) were cultured for Legionella. Clinical and environmental isolates were compared using monoclonal antibody subtyping and sequence based typing (SBT). Results Case-patients were significantly more likely than controls to have passed through several city areas that contained or were adjacent to areas with cooling towers positive for Legionella. Six of 11 case-patients (matched odds ratio (mOR) 32.7, 95% CI 4.7-∞) reported eating in Restaurant A versus 0 controls. Legionella pneumophila serogroup 1 was isolated from four clinical specimens: 3 were Benidorm type strains and 1 was a Denver type strain. Legionella were identified from several environmental sites including 24 (56%) of 43 cooling towers tested, but only one site, a small decorative fountain in Restaurant A, contained Benidorm, the outbreak strain. Clinical and environmental Benidorm isolates had identical SBT patterns. Conclusion This is the first time that small fountain without obvious aerosol-generating capability has been implicated as the source of a LD outbreak. Removal of the fountain halted transmission. PMID:17688692

Ecological approach to resource survey and planning for environmentally significant Areas: The ABC method

NASA Astrophysics Data System (ADS)

Bastedo, Jamie D.; Nelson, J. Gordon; Theberge, John B.

1984-03-01

A resource survey and planning method for parks, reserves, and other environmentally significant areas (ESAs) is presented in the context of a holistic balanced approach to land use and environmental management. This method provides a framework for the acquisition, analysis, presentation, and application of diverse ecological data pertinent to land use planning and resource management within ESAs. Through the independent analysis and subsequent integration of abiotic, biotic, and cultural or ABC information, land areas within an ESA are identified in terms of their relative environmental significance and environmental constraints. The former term encompasses wildlife, historic, and other resource values, while the latter term reflects biophysical hazards and sensitivities, and land use conflicts. The method thus calls for a matching of an ESA's distinctive attributes with appropriate land use and institutional arrancements through an analysis of available acts, regulations, agencies, and other conservation and land use management mechanisms. The method culminates with a management proposal showing proposed park or reserve allocations, buffer areas, or other land use controls aimed at preserving an ESA's special ecological qualities, while providing for resource development. The authors suggest that all resource management decisions affecting ESA's should be governed by a philosophical stance that recognizes a spectrum of broad land use types, ranging from preservation to extractive use and rehabilitation.

Safety in the Chemical Laboratory--Chemical Management: A Method for Waste Reduction.

ERIC Educational Resources Information Center

Pine, Stanley H.

1984-01-01

Discusses methods for reducing or eliminating waste disposal problems in the chemistry laboratory, considering both economic and environmental aspects of the problems. Proposes inventory control, shared use, solvent recycling, zero effluent, and various means of disposing of chemicals. (JM)

40 CFR 408.121 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... those components of a waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 217. (c) The term seafood shall mean the raw material, including freshwater and saltwater...

Applicator Training Manual for: Agricultural Animal Pest Control.

ERIC Educational Resources Information Center

Christensen, Christian M.

This manual discusses pesticide safety and environmental considerations, pesticide toxicity, residue potential, pesticide formulations, and application techniques. In addition, descriptions of, and methods for controlling insects and related pests that attack cattle, sheep and goats, swine, horses and other equines, and poultry are given. These…

An outbreak of vancomycin-resistant Enterococcus faecium in an acute care pediatric hospital: Lessons from environmental screening and a case-control study

PubMed Central

Drews, Steven J; Richardson, Susan E; Wray, Rick; Freeman, Renee; Goldman, Carol; Streitenberger, Laurie; Stevens, Derek; Goia, Cristina; Kovach, Danuta; Brophy, Jason; Matlow, Anne G

2008-01-01

BACKGROUND The present study describes a vancomycin-resistant enterococci (VRE) outbreak investigation and a case-control study to identify risk factors for VRE acquisition in a tertiary care pediatric hospital. OBJECTIVE To report an outbreak investigation and a case-control study to identify risk factors for VRE colonization or infection in hospitalized children. METHODS Screening for VRE cases was performed by culture or polymerase chain reaction. A case-control study of VRE-colonized patients was undertaken. Environmental screening was performed using standard culture and susceptibility methods, with pulsed-field gel electrophoresis to determine relationships between VRE isolates. Statistical analysis was performed using SAS version 9.0 (SAS Institute Inc, USA). RESULTS Thirty-four VRE-positive cases were identified on 10 wards between February 28, 2005, and May 27, 2005. Pulsed-field gel electrophoresis analysis confirmed a single outbreak strain that was also isolated from a video game found on one affected ward. Multivariate analysis identified cephalosporin use as the major risk factor for VRE colonization. CONCLUSIONS In the present study outbreak, VRE colonization was significantly associated with cephalosporin use. Because shared recreational items and environmental surfaces may be colonized by VRE, they warrant particular attention in housekeeping protocols, particularly in pediatric institutions. PMID:19412380

OCEAN THERMAL ENERGY CONVERSION (OTEC) PROGRAMMATIC ENVIRONMENTAL ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sands, M. D.

1980-01-01

This programmatic environmental analysis is an initial assessment of OTEC technology considering development, demonstration and commercialization; it is concluded that the OTEC development program should continue because the development, demonstration, and commercialization on a single-plant deployment basis should not present significant environmental impacts. However, several areas within the OTEC program require further investigation in order to assess the potential for environmental impacts from OTEC operation, particularly in large-scale deployments and in defining alternatives to closed-cycle biofouling control: (1) Larger-scale deployments of OTEC clusters or parks require further investigations in order to assess optimal platform siting distances necessary to minimize adversemore » environmental impacts. (2) The deployment and operation of the preoperational platform (OTEC-1) and future demonstration platforms must be carefully monitored to refine environmental assessment predictions, and to provide design modifications which may mitigate or reduce environmental impacts for larger-scale operations. These platforms will provide a valuable opportunity to fully evaluate the intake and discharge configurations, biofouling control methods, and both short-term and long-term environmental effects associated with platform operations. (3) Successful development of OTEC technology to use the maximal resource capabilities and to minimize environmental effects will require a concerted environmental management program, encompassing many different disciplines and environmental specialties.« less

Construction of Interaction Layer on Socio-Environmental Simulation

NASA Astrophysics Data System (ADS)

Torii, Daisuke; Ishida, Toru

In this study, we propose a method to construct a system based on a legacy socio-environmental simulator which enables to design more realistic interaction models in socio-environmetal simulations. First, to provide a computational model suitable for agent interactions, an interaction layer is constructed and connected from outside of a legacy socio-environmental simulator. Next, to configure the agents interacting ability, connection description for controlling the flow of information in the connection area is provided. As a concrete example, we realized an interaction layer by Q which is a scenario description language and connected it to CORMAS, a socio-envirionmental simulator. Finally, we discuss the capability of our method, using the system, in the Fire-Fighter domain.

Reinforcement learning for a biped robot based on a CPG-actor-critic method.

PubMed

Nakamura, Yutaka; Mori, Takeshi; Sato, Masa-aki; Ishii, Shin

2007-08-01

Animals' rhythmic movements, such as locomotion, are considered to be controlled by neural circuits called central pattern generators (CPGs), which generate oscillatory signals. Motivated by this biological mechanism, studies have been conducted on the rhythmic movements controlled by CPG. As an autonomous learning framework for a CPG controller, we propose in this article a reinforcement learning method we call the "CPG-actor-critic" method. This method introduces a new architecture to the actor, and its training is roughly based on a stochastic policy gradient algorithm presented recently. We apply this method to an automatic acquisition problem of control for a biped robot. Computer simulations show that training of the CPG can be successfully performed by our method, thus allowing the biped robot to not only walk stably but also adapt to environmental changes.

MSFC Sortie Laboratory Environmental Control System (ECS) phase B design study results

NASA Technical Reports Server (NTRS)

Ignatonis, A. J.; Mitchell, K. L.

1974-01-01

Phase B effort of the Sortie Lab program has concluded. Results of that effort are presented which pertain to the definitions of the environmental control system (ECS). Numerous design studies were performed in Phase B to investigate system feasibility, complexity, weight, and cost. The results and methods employed for these design studies are included. An autonomous Sortie Lab ECS was developed which utilizes a deployed space radiator. Total system weight was projected to be 1814.4 kg including the radiator and fluids. ECS power requirements were estimated at 950 watts.

Leader-follower formation control of underactuated surface vehicles based on sliding mode control and parameter estimation.

PubMed

Sun, Zhijian; Zhang, Guoqing; Lu, Yu; Zhang, Weidong

2018-01-01

This paper studies the leader-follower formation control of underactuated surface vehicles with model uncertainties and environmental disturbances. A parameter estimation and upper bound estimation based sliding mode control scheme is proposed to solve the problem of the unknown plant parameters and environmental disturbances. For each of these leader-follower formation systems, the dynamic equations of position and attitude are analyzed using coordinate transformation with the aid of the backstepping technique. All the variables are guaranteed to be uniformly ultimately bounded stable in the closed-loop system, which is proven by the distribution design Lyapunov function synthesis. The main advantages of this approach are that: first, parameter estimation based sliding mode control can enhance the robustness of the closed-loop system in presence of model uncertainties and environmental disturbances; second, a continuous function is developed to replace the signum function in the design of sliding mode scheme, which devotes to reduce the chattering of the control system. Finally, numerical simulations are given to demonstrate the effectiveness of the proposed method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Forest Pest Control. Bulletin 759.

ERIC Educational Resources Information Center

Coleman, V. Rodney

This manual describes the major forest types, the major species, seed orchards, and tree nurseries. Methods of identifying forest insect pests and diseases are given. The most common types of insecticides, fungicides, and herbicides are described. Both sprayer and granular applicator methods are discussed. Environmental considerations are…

40 CFR 63.1107 - Equipment leaks: applicability assessment procedures and methods.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Equipment leaks: applicability assessment procedures and methods. 63.1107 Section 63.1107 Protection of Environment ENVIRONMENTAL PROTECTION... Categories: Generic Maximum Achievable Control Technology Standards § 63.1107 Equipment leaks: applicability...

16 CFR 1633.3 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.3 General requirements. (a) Summary of test method. The test method set forth in § 1633.7 measures the flammability (fire test response... allowing it to burn freely under well-ventilated, controlled environmental conditions. The flaming ignition...

Comparison of the Reveal 20-hour method and the BAM culture method for the detection of Escherichia coli O157:H7 in selected foods and environmental swabs: collaborative study.

PubMed

Bird, C B; Hoerner, R J; Restaino, L

2001-01-01

Four different food types along with environmental swabs were analyzed by the Reveal for E. coli O157:H7 test (Reveal) and the Bacteriological Analytical Manual (BAM) culture method for the presence of Escherichia coli O157:H7. Twenty-seven laboratories representing academia and private industry in the United States and Canada participated. Sample types were inoculated with E. coli O157:H7 at 2 different levels. Of the 1,095 samples and controls analyzed and confirmed, 459 were positive and 557 were negative by both methods. No statistical differences (p <0.05) were observed between the Reveal and BAM methods.

Ornamental and Turfgrass Pest Control. Sale Publication 4074.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide gives information for recognition and control of ornamental and turf pests. Included are disease agents, insects and mites, weeds, and vertebrates. Symptoms and causes of phytotoxicity are given, and a discussion is presented of environmental concerns. Application methods and area measurement are also discussed. (BB)

The ABCs of Non-Toxic Pest Control.

ERIC Educational Resources Information Center

Cooper, Susan

1990-01-01

Although chemical-intensive pest control methods have proven reasonably effective, a growing awareness of health and environmental risks associated with pesticides has sharpened public interest in safer alternatives. An integrated pest management approach reduces risks from pests while minimizing human exposure and reducing the toxicity of applied…

Prospects for repellent in pest control: current developments and future challenges

USDA-ARS?s Scientific Manuscript database

The overall interest for environmentally safe pest control methods and the increased frequency of insecticide resistance in pest populations have stimulated research on insect repellents in the recent decades in medical and agricultural entomology. However, there remains a great deal of work to be ...

Development of space-stable thermal control coatings for use on large space vehicles

NASA Technical Reports Server (NTRS)

Gilligan, J. E.; Harada, Y.

1976-01-01

The potential of zinc orthotitanate as a pigment for spacecraft thermal control was demonstrated. The properties and performance of pigments prepared by solid state, coprecipitation, and mixed oxalate methods were compared. Environmental tests and subsequent spectral analysis were given primary emphasis.

Environmental application of remote sensing methods to coastal zone land use and marine resource management. Appendix F: User's guide for advection, convection prototype. [southeastern Virginia

NASA Technical Reports Server (NTRS)

1972-01-01

A user's manual is provided for the environmental computer model proposed for the Richmond-Cape Henry Environmental Laboratory (RICHEL) application project for coastal zone land use investigations and marine resources management. The model was developed around the hydrologic cycle and includes two data bases consisting of climate and land use variables. The main program is described, along with control parameters to be set and pertinent subroutines.

Environment sanitation handbook

NASA Technical Reports Server (NTRS)

1973-01-01

The environmental Sanitation handbook provides guidance in the implementation of the basic provisions of occupational medicine and environmental health programs to environmental sanitation. It presents methods and procedures useful for the control of those sanitation factors which could create discomfort and illness in man or do harm to his environment. The provisions of this handbook are applicable to all organizational elements of the Kennedy Space Center (KSC),NASA, and to its associated contractors located at KSC in accordance with the terms of their respective contracts.

Tolerance of entomopathogenic fungi to ultraviolet radiation: a review on screening of strains and their formulation.

PubMed

Fernandes, Éverton K K; Rangel, Drauzio E N; Braga, Gilberto U L; Roberts, Donald W

2015-08-01

Ultraviolet radiation from sunlight is probably the most detrimental environmental factor affecting the viability of entomopathogenic fungi applied to solar-exposed sites (e.g., leaves) for pest control. Most entomopathogenic fungi are sensitive to UV radiation, but there is great inter- and intraspecies variability in susceptibility to UV. This variability may reflect natural adaptations of isolates to their different environmental conditions. Selecting strains with outstanding natural tolerance to UV is considered as an important step to identify promising biological control agents. However, reports on tolerance among the isolates used to date must be analyzed carefully due to considerable variations in the methods used to garner the data. The current review presents tables listing many studies in which different methods were applied to check natural and enhanced tolerance to UV stress of numerous entomopathogenic fungi, including several well-known isolates of these fungi. The assessment of UV tolerance is usually conducted with conidia using dose-response methods, wherein the UV dose is calculated simply by multiplying the total irradiance by the period (time) of exposure. Although irradiation from lamps seldom presents an environmentally realistic spectral distribution, laboratory tests circumvent the uncontrollable circumstances associated with field assays. Most attempts to increase field persistence of microbial agents have included formulating conidia with UV protectants; however, in many cases, field efficacy of formulated fungi is still not fully adequate for dependable pest control.

Recent Application of Solid Phase Based Techniques for Extraction and Preconcentration of Cyanotoxins in Environmental Matrices.

PubMed

Mashile, Geaneth Pertunia; Nomngongo, Philiswa N

2017-03-04

Cyanotoxins are toxic and are found in eutrophic, municipal, and residential water supplies. For this reason, their occurrence in drinking water systems has become a global concern. Therefore, monitoring, control, risk assessment, and prevention of these contaminants in the environmental bodies are important subjects associated with public health. Thus, rapid, sensitive, selective, simple, and accurate analytical methods for the identification and determination of cyanotoxins are required. In this paper, the sampling methodologies and applications of solid phase-based sample preparation methods for the determination of cyanotoxins in environmental matrices are reviewed. The sample preparation techniques mainly include solid phase micro-extraction (SPME), solid phase extraction (SPE), and solid phase adsorption toxin tracking technology (SPATT). In addition, advantages and disadvantages and future prospects of these methods have been discussed.

Controlling measures of micro-plastic and nano pollutants: A short review of disposing waste toners.

PubMed

Ruan, Jujun; Qin, Baojia; Huang, Jiaxin

2018-05-31

Micro-plastic and nano-particle have been the focal pollutants in environmental science. The printer toner is omitted micro-plastic and nano pollutant. It is comprised of micro polyacrylate styrene and nano-Fe 3 O 4 particles. Polyacrylate styrene and nano-metal were proved to be irreversibly toxic to biological cells. Therefore, toners have the potential environmental risk and healthy harm due to include micro plastics and nano-metal. To our knowledge, few studies provided the specific collection and treatment of micro-plastic pollutant. This paper has chosen a kind of micro-plastic and nano pollutant toxic toner and provided technical guidance and inspiration for controlling the micro-plastic and nano pollutants. The method of vacuum-gasification-condensation was adopted for controlling the micro-plastic and nano pollutant toner. We believe this review will open up a potential avenue for controlling micro-plastic and nano pollutants for environmental protection. Copyright © 2018 Elsevier Ltd. All rights reserved.

40 CFR 408.141 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to this subpart. (b) The term oil and grease shall mean those components of a waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 217. (c) The term seafood shall...

40 CFR 408.11 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to this subpart. (b) The term oil and grease shall mean those components of a waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 217. (c) The term seafood shall...

40 CFR 408.51 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to this subpart. (b) The term oil and grease shall mean those components of a waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 217. (c) The term seafood shall...

ANALYTICAL METHODS NECESSARY TO IMPLEMENT RISK-BASED CRITERIA FOR CHEMICALS IN MUNICIPAL SLUDGE

EPA Science Inventory

The Ambient Water Quality Criteria that were promulgated by the U.S. Environmental Protection Agency in 1980 included water concentration levels which, for many pollutants, were so low as to be unmeasurable by standard analytical methods. Criteria for controlling toxics in munici...

Advantages and Disadvantages of Aquatic Plant Management Techniques

DTIC Science & Technology

2000-09-01

This report provides an overview of the environmental and practical advantages and disadvantages of the major aquatic plant management methods, including biological, chemical, mechanical, and physical control techniques.

Critical outlook and trends for environmental reference materials at the Measurements & Testing Generic Activity (European Commission).

PubMed

Quevauviller, P; Bennink, D; Bøwadt, S

2001-05-01

It is now well recognised that the quality control (QC) of all types of analyses, including environmental analyses depends on the appropriate use of reference materials. One of the ways to check the accuracy of methods is based on the use of Certified Reference Materials (CRMs), whereas other types of (not certified) Reference Materials (RMs) are used for routine quality control (establishment of control charts) and interlaboratory testing (e.g. proficiency testing). The perception of these materials, in particular with respect to their production and use, differs widely according to various perspectives (e.g. RM producers, routine laboratories, researchers). This review discusses some critical aspects of RM use and production for the QC of environmental analyses and describes the new approach followed by the Measurements & Testing Generic Activity (European Commission) to tackle new research and production needs.

Sustainable materials management using the Leaching Environmental Assessment Framework test methods

EPA Science Inventory

The need for improved leach tests became a priority due to adoption of more stringent air pollution control at U.S. coal-fired power plants resulting in the preferential partitioning of mercury (Hg) and other pollutants to fly ash and other air pollution control residues. Fly ash...

Improved leaching test methods for environmental assessment of coal ash and recycled materials used on construction

EPA Science Inventory

Changes in air pollution control at coal-fired power plants will result in lower emissions of mercury and other pollutants. Fly ash, flue gas desulfurization gypsum, and other air pollution control residues are used in agricultural, commercial, and engineering applications. Resea...

Regulatory Pest Control. Pesticide Bulletin 1.

ERIC Educational Resources Information Center

Thornton, George C.

This manual gives descriptions of and control methods for the imported fire ant, sweet potato pests, the white fringed beetle, the Japanese beetle, and phony peach disease. Toxicity, formulation, and application information is given for 2,4-D, methyl bromide, Chlordane, Mirex, and Mocap. Finally, environmental considerations and precautions are…

78 FR 63929 - Approval and Promulgation of Air Quality Implementation Plans; Texas; Revisions to Rules and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... for Control of Air Pollution; Permitting of Grandfathered Facilities AGENCY: Environmental Protection... grandfathered facilities obtain specific permits which include emission control methods to achieve mandated... or contact information unless you provide it in the body of your comment. If you send an email...

Sound, Noise, and Vibration Control.

ERIC Educational Resources Information Center

Yerges, Lyle F.

This working guide on the principles and techniques of controlling acoustical environment is discussed in the light of human, environmental and building needs. The nature of sound and its variables are defined. The acoustical environment and its many materials, spaces and functional requirements are described, with specific methods for planning,…

New method for measuring water seepage through salmon spawning gravel.

Treesearch

Richard D. Orchard

1988-01-01

A new method, with heat as a tracer, was developed for measuring rate and direction of intragravel waterflow through salmon spawning gravel. A commercial flowmeter was calibrated in the laboratory under controlled environmental conditions. Flow measurements comparing the flowmeter with a dye-tracer method were made in an artificial stream channel at Young Bay and in...

Sterile-Insect Methods for Control of Mosquito-Borne Diseases: An Analysis

PubMed Central

Benedict, Mark; Bellini, Romeo; Clark, Gary G.; Dame, David A.; Service, Mike W.; Dobson, Stephen L.

2010-01-01

Abstract Effective vector control, and more specifically mosquito control, is a complex and difficult problem, as illustrated by the continuing prevalence (and spread) of mosquito-transmitted diseases. The sterile insect technique and similar methods control certain agricultural insect pest populations in a species-specific, environmentally sound, and effective manner; there is increased interest in applying this approach to vector control. Such an approach, like all others in use and development, is not a one-size-fits-all solution, and will be more appropriate in some situations than others. In addition, the proposed release of pest insects, and more so genetically modified pest insects, is bound to raise questions in the general public and the scientific community as to such a method's efficacy, safety, and sustainability. This article attempts to address these concerns and indicate where sterile-insect methods are likely to be useful for vector control. PMID:19725763

Environmental Lead Pollution and Elevated Blood Lead Levels Among Children in a Rural Area of China

PubMed Central

Lin, Sihao; Yu, Ignatius Tak Sun; Tang, Wenjuan; Miao, Jianying; Li, Jin; Wu, Siying; Lin, Xing

2011-01-01

Objectives. We investigated environmental lead pollution and its impact on children's blood lead levels (BLLs) in a rural area of China. Methods. In 2007, we studied 379 children younger than 15 years living in 7 villages near lead mines and processing plants, along with a control group of 61 children from another village. We determined their BLLs and collected environmental samples, personal data, and information on other potential exposures. We followed approximately 86% of the children who had high BLLs (> 15 μg/dL) for 1 year. We determined factors influencing BLLs by multivariate linear regression. Results. Lead concentrations in soil and household dust were much higher in polluted villages than in the control village, and more children in the polluted area than in the control village had elevated BLLs (87%, 16.4 μg/dL vs 20%, 7.1 μg/dL). Increased BLL was independently associated with environmental lead levels. We found a significant reduction of 5 micrograms per deciliter when we retested children after 1 year. Conclusions. Our data show that the lead industry caused serious environmental pollution that led to high BLLs in children living nearby. PMID:21421950

Bonneville Power Administration Transmission System Vegetation Management Program - Final Environmental Impact Statement

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

Bonneville is responsible for maintaining a network of 24,000 kilometers (km) or 15,000 miles (mi.) of electric transmission lines and 350 substations in a region of diverse vegetation. This vegetation can interfere with electric power flow, pose safety problems for us and the public, and interfere with our ability to maintain these facilities. We need to (1) keep vegetation away from our electric facilities; (2) increase our program efficiency and consistency; (3) review herbicide use (under increased public scrutiny); and (4) maximize the range of tools we can use while minimizing environmental impact (Integrated Vegetation Management). This Final Environmental Impactmore » Statement (FEIS) establishes Planning Steps for managing vegetation for specific projects (to be tiered to this Environmental Impact Statement (EIS)). In addition to No Action (current practice), alternatives are presented for Rights-of-way, Electric Yards, and Non-electric Facilities (landscaping, work yards). Four vegetation control methods are analyzed manual, mechanical, herbicide, and biological. Also evaluated are 23 herbicide active ingredients and 4 herbicide application techniques (spot, localized, broadcast, and aerial). For rights-of-way, we consider three sets of alternatives: alternative management approaches (time-driven or establishing low-growing plant communities); alternative method packages; and, if herbicides are in a methods package, alternative vegetation selections (noxious weeds, deciduous, or any vegetation). For electric yards, one herbicide-use alternative is considered. For non-electric facilities, two method package alternatives are considered. For rights-of-way, the environmentally preferred alternative(s) would use manual, mechanical, and biological control methods, as well as spot and localized herbicide applications for noxious and deciduous plant species; the BPA-preferred alternative(s) would add broadcast and aerial herbicide applications, and would use herbicides on any vegetation. Both would favor a management approach that fosters low-growing plant communities.« less

Integrated approach of environmental impact and risk assessment of Rosia Montana Mining Area, Romania.

PubMed

Stefănescu, Lucrina; Robu, Brînduşa Mihaela; Ozunu, Alexandru

2013-11-01

The environmental impact assessment of mining sites represents nowadays a large interest topic in Romania. Historical pollution in the Rosia Montana mining area of Romania caused extensive damage to environmental media. This paper has two goals: to investigate the environmental pollution induced by mining activities in the Rosia Montana area and to quantify the environmental impacts and associated risks by means of an integrated approach. Thus, a new method was developed and applied for quantifying the impact of mining activities, taking account of the quality of environmental media in the mining area, and used as case study in the present paper. The associated risks are a function of the environmental impacts and the probability of their occurrence. The results show that the environmental impacts and quantified risks, based on quality indicators to characterize the environmental quality, are of a higher order, and thus measures for pollution remediation and control need to be considered in the investigated area. The conclusion drawn is that an integrated approach for the assessment of environmental impact and associated risks is a valuable and more objective method, and is an important tool that can be applied in the decision-making process for national authorities in the prioritization of emergency action.

Semiparametric Bayesian analysis of gene-environment interactions with error in measurement of environmental covariates and missing genetic data.

PubMed

Lobach, Iryna; Mallick, Bani; Carroll, Raymond J

2011-01-01

Case-control studies are widely used to detect gene-environment interactions in the etiology of complex diseases. Many variables that are of interest to biomedical researchers are difficult to measure on an individual level, e.g. nutrient intake, cigarette smoking exposure, long-term toxic exposure. Measurement error causes bias in parameter estimates, thus masking key features of data and leading to loss of power and spurious/masked associations. We develop a Bayesian methodology for analysis of case-control studies for the case when measurement error is present in an environmental covariate and the genetic variable has missing data. This approach offers several advantages. It allows prior information to enter the model to make estimation and inference more precise. The environmental covariates measured exactly are modeled completely nonparametrically. Further, information about the probability of disease can be incorporated in the estimation procedure to improve quality of parameter estimates, what cannot be done in conventional case-control studies. A unique feature of the procedure under investigation is that the analysis is based on a pseudo-likelihood function therefore conventional Bayesian techniques may not be technically correct. We propose an approach using Markov Chain Monte Carlo sampling as well as a computationally simple method based on an asymptotic posterior distribution. Simulation experiments demonstrated that our method produced parameter estimates that are nearly unbiased even for small sample sizes. An application of our method is illustrated using a population-based case-control study of the association between calcium intake with the risk of colorectal adenoma development.

Data quality control in eco-environmental monitoring

NASA Astrophysics Data System (ADS)

Lu, Chunyan; Wang, Jing

2007-11-01

With the development of science and technology, a number of environmental issues, such as sustainable development, climate change, environmental pollution, and land degradation become serious. Greater attention has been attached to environmental protection. The government gradually launched some eco--environmental construction projects. In 1999, China begin to carry out the project of Grain-for-Green in the west, to improve the eco-environment, and it make some good effect, but there are some questions that still can not be answered. How about the new grass or forest? Where are they? How can we do in the future? To answer these questions, the government began to monitor the eco-environment, based on remote sensing technology. Geography information can be attained timely, but the issue of uncertainty has become increasingly recognized, and this uncertainty affects the reliability of applications using the data. This article analyzed the process of eco-environment monitoring, the uncertainty of geography information, and discussed the methods of data quality control. The Spot5 span data and multi-spectral data in 2003(2002) were used, combined with land use survey data at the scale of 1:10,000, topography data at the scale of 1:10,000, and the local Grain-for-Green project map. Also the social and economic data were collected. Eco-environmental monitoring is a process which consists of several steps, such as image geometric correction, image matching, information extraction, and so on. Based on visual and automated method, land information turned to grass and forest from cultivated land was obtained by comparing the information form remote sensing data with the land survey data, and local Grain-for-Green project data, combined with field survey. According to the process, the uncertainty in the process was analyzed. Positional uncertainty, attribute uncertainty, and thematic uncertainty was obvious. Positional uncertainty mainly derived from image geometric correction, such as data resource, the number and spatial distribution of the control points are important resource of uncertainty. Attribution uncertainty mainly derived from the process of information extraction. Land classification system, artificial error was the main factor induced uncertainty. Concept defined was not clear, and it reduced thematic uncertainty. According to the resource of uncertainty, data quality control methods were put forward to improve the data quality. At first, it is more important to choose appropriate remote sensing data and other basic data. Secondly, the accuracy of digital orthophoto map should be controlled. Thirdly, it is necessary to check the result data according to relative data quality criterion to guarantee GIS data quality.

A sustainable approach to controlling oil spills.

PubMed

Al-Majed, Abdul Aziz; Adebayo, Abdulrauf Rasheed; Hossain, M Enamul

2012-12-30

As a result of the huge economic and environmental destruction from oil spills, studies have been directed at improving and deploying natural sorbents which are not only the least expensive but also the safest means of spill control. This research reviews the limitations and environmental impact of existing cleanup methods. It also justifies the need for concerted research effort on oil spill control using natural and sustainable technology concepts. The article proposes future guidelines for the development of a sustainable cleanup technology. Finally, guidelines for the development of a new technology for the Middle East are proposed, which is the use of an abundant resource--date palm fibers--for such techniques. Copyright © 2012 Elsevier Ltd. All rights reserved.

Designing For Human Presence in Space: An Introduction to Environmental Control and Life Support Systems (ECLSS)

NASA Technical Reports Server (NTRS)

Wieland, P. O.

2005-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The tables in appendix I of NASA RP 1324 "Designing for Human Presence in Space" summarize the life support functions and processes used onboard U.S. and U.S.S.R/Russian space habitats. These tables have been updated to include information on thermal control methods and to provide additional information on the ECLS systems.

Ocean Thermal Energy Conversion (OTEC) Programmatic Environmental Analysis--Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Authors, Various

1980-01-01

The programmatic environmental analysis is an initial assessment of Ocean Thermal Energy Conversion (OTEC) technology considering development, demonstration and commercialization. It is concluded that the OTEC development program should continue because the development, demonstration, and commercialization on a single-plant deployment basis should not present significant environmental impacts. However, several areas within the OTEC program require further investigation in order to assess the potential for environmental impacts from OTEC operation, particularly in large-scale deployments and in defining alternatives to closed-cycle biofouling control: (1) Larger-scale deployments of OTEC clusters or parks require further investigations in order to assess optimal platform siting distancesmore » necessary to minimize adverse environmental impacts. (2) The deployment and operation of the preoperational platform (OTEC-1) and future demonstration platforms must be carefully monitored to refine environmental assessment predictions, and to provide design modifications which may mitigate or reduce environmental impacts for larger-scale operations. These platforms will provide a valuable opportunity to fully evaluate the intake and discharge configurations, biofouling control methods, and both short-term and long-term environmental effects associated with platform operations. (3) Successful development of OTEC technology to use the maximal resource capabilities and to minimize environmental effects will require a concerted environmental management program, encompassing many different disciplines and environmental specialties. This volume contains these appendices: Appendix A -- Deployment Scenario; Appendix B -- OTEC Regional Characterization; and Appendix C -- Impact and Related Calculations.« less

7 CFR 2902.8 - Determining life cycle costs, environmental and health benefits, and performance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions”; (2) D5864“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or...“Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components...

40 CFR 408.41 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... shall apply to this subpart. (b) The term oil and grease shall mean those components of a waste water amenable to measurement by the method described in Methods for Chemical Analysis of Water and Wastes, 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 217. (c) The term seafood shall...

Effectiveness of a Household Environmental Health Intervention Delivered by Rural Public Health Nurses

PubMed Central

Hill, Wade; Postma, Julie; Butterfield, Phillip W.; Odom-Maryon, Tamara

2011-01-01

Objectives. Parents need meaningful and actionable information if they are to reduce household environmental health risks to their children. To address this issue, we tested the effectiveness of a multi-risk social/cognitive intervention on rural low-income parents' (1) environmental health self-efficacy and (2) stage of environmental health precautionary adoption. Methods. Biomarker (lead, cotinine) and household samples (carbon monoxide, radon, mold/mildew, and drinking water contaminants) were collected from 235 families (399 adults, 441 children) in Montana and Washington states. Families were randomly assigned to intervention or control groups; intervention families received 4 visits from public health nurses who provided tailored information and guidance to parents; controls received usual and customary public health services. Results. At 3 months, the intervention group had significantly higher scores on (1) all 6 risk-specific self-efficacy subscales (P < .01), (2) general environmental health self-efficacy (P < .001), (3) 5 of 6 risk-specific precaution adoption subscales (P < .05), and (4) general environmental health precaution adoption (P < .001). Conclusions. The intervention yielded significant improvements in both outcomes. This evidence supported the need for a policy discussion addressing the added value that broadbased public health nurse interventions might bring to children's environmental health. PMID:21836117

Engaging academia to advance the science and practice of environmental public health tracking.

PubMed

Strosnider, Heather; Zhou, Ying; Balluz, Lina; Qualters, Judith

2014-10-01

Public health agencies at the federal, state, and local level are responsible for implementing actions and policies that address health problems related to environmental hazards. These actions and policies can be informed by integrating or linking data on health, exposure, hazards, and population. The mission of the Centers for Disease Control and Prevention׳s National Environmental Public Health Tracking Program (Tracking Program) is to provide information from a nationwide network of integrated health, environmental hazard, and exposure data that drives actions to improve the health of communities. The Tracking Program and federal, state, and local partners collect, integrate, analyze, and disseminate data and information to inform environmental public health actions. However, many challenges exist regarding the availability and quality of data, the application of appropriate methods and tools to link data, and the state of the science needed to link and analyze health and environmental data. The Tracking Program has collaborated with academia to address key challenges in these areas. The collaboration has improved our understanding of the uses and limitations of available data and methods, expanded the use of existing data and methods, and increased our knowledge about the connections between health and environment. Valuable working relationships have been forged in this process, and together we have identified opportunities and improvements for future collaborations to further advance the science and practice of environmental public health tracking. Published by Elsevier Inc.

The Genetic Etiology of Inhibitory Control and Behavior Problems at 24 Months of Age

ERIC Educational Resources Information Center

Gagne, Jeffrey R.; Saudino, Kimberly J.; Asherson, Philip

2011-01-01

Background: To investigate links between inhibitory control (IC) and behavior problems in early childhood, as well as genetic and environmental covariances between these two constructs. Methods: Parent and laboratory ratings of IC and parent ratings of externalizing and attention deficit hyperactivity disorder behaviors were administered at 24…

78 FR 59712 - Notice of Availability of the Draft Environmental Impact Statement for the 3 Bars Ecosystem and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... treatment methods would include manual, mechanical, and biological control treatments, prescribed fire or wildland fire for resource benefit, and other management actions. In order to implement the proposed 3 Bars... enhancement, fire and fuels management, control of weeds, woodland and rangeland values, wetland and riparian...

Development of Chemical Process Design and Control for ...

EPA Pesticide Factsheets

This contribution describes a novel process systems engineering framework that couples advanced control with sustainability evaluation and decision making for the optimization of process operations to minimize environmental impacts associated with products, materials, and energy. The implemented control strategy combines a biologically inspired method with optimal control concepts for finding more sustainable operating trajectories. The sustainability assessment of process operating points is carried out by using the U.S. E.P.A.’s Gauging Reaction Effectiveness for the ENvironmental Sustainability of Chemistries with a multi-Objective Process Evaluator (GREENSCOPE) tool that provides scores for the selected indicators in the economic, material efficiency, environmental and energy areas. The indicator scores describe process performance on a sustainability measurement scale, effectively determining which operating point is more sustainable if there are more than several steady states for one specific product manufacturing. Through comparisons between a representative benchmark and the optimal steady-states obtained through implementation of the proposed controller, a systematic decision can be made in terms of whether the implementation of the controller is moving the process towards a more sustainable operation. The effectiveness of the proposed framework is illustrated through a case study of a continuous fermentation process for fuel production, whose materi

Natural disasters and indicators of social cohesion.

PubMed

Calo-Blanco, Aitor; Kovářík, Jaromír; Mengel, Friederike; Romero, José Gabriel

2017-01-01

Do adversarial environmental conditions create social cohesion? We provide new answers to this question by exploiting spatial and temporal variation in exposure to earthquakes across Chile. Using a variety of methods and controlling for a number of socio-economic variables, we find that exposure to earthquakes has a positive effect on several indicators of social cohesion. Social cohesion increases after a big earthquake and slowly erodes in periods where environmental conditions are less adverse. Our results contribute to the current debate on whether and how environmental conditions shape formal and informal institutions.

Natural disasters and indicators of social cohesion

PubMed Central

Calo-Blanco, Aitor; Kovářík, Jaromír; Mengel, Friederike; Romero, José Gabriel

2017-01-01

Do adversarial environmental conditions create social cohesion? We provide new answers to this question by exploiting spatial and temporal variation in exposure to earthquakes across Chile. Using a variety of methods and controlling for a number of socio-economic variables, we find that exposure to earthquakes has a positive effect on several indicators of social cohesion. Social cohesion increases after a big earthquake and slowly erodes in periods where environmental conditions are less adverse. Our results contribute to the current debate on whether and how environmental conditions shape formal and informal institutions. PMID:28591148

Genetic and environmental origins of health anxiety: a twin study

PubMed Central

TAYLOR, STEVEN; THORDARSON, DANA S; JANG, KERRY L; ASMUNDSON, GORDON J.G

2006-01-01

Excessive health anxiety - which is anxiety about one's health that is disproportionate to the person's medical status - is a common and often debilitating problem. Little is known about its etiology. The present study investigated the role of genetic and environmental factors using a classic twin study method. Results indicated that, after controlling for medical morbidity, environmental influences accounted for most of individual differences in health anxiety. These findings underscore the importance of psychosocial interventions, which have been shown to be among the most effective interventions for excessive health anxiety. PMID:16757996

The application of neural network PID controller to control the light gasoline etherification

NASA Astrophysics Data System (ADS)

Cheng, Huanxin; Zhang, Yimin; Kong, Lingling; Meng, Xiangyong

2017-06-01

Light gasoline etherification technology can effectively improve the quality of gasoline, which is environmental- friendly and economical. By combining BP neural network and PID control and using BP neural network self-learning ability for online parameter tuning, this method optimizes the parameters of PID controller and applies this to the Fcc gas flow control to achieve the control of the final product- heavy oil concentration. Finally, through MATLAB simulation, it is found that the PID control based on BP neural network has better controlling effect than traditional PID control.

Management of Occupational Exposure to Engineered Nanoparticles Through a Chance-Constrained Nonlinear Programming Approach

PubMed Central

Chen, Zhi; Yuan, Yuan; Zhang, Shu-Shen; Chen, Yu; Yang, Feng-Lin

2013-01-01

Critical environmental and human health concerns are associated with the rapidly growing fields of nanotechnology and manufactured nanomaterials (MNMs). The main risk arises from occupational exposure via chronic inhalation of nanoparticles. This research presents a chance-constrained nonlinear programming (CCNLP) optimization approach, which is developed to maximize the nanaomaterial production and minimize the risks of workplace exposure to MNMs. The CCNLP method integrates nonlinear programming (NLP) and chance-constrained programming (CCP), and handles uncertainties associated with both the nanomaterial production and workplace exposure control. The CCNLP method was examined through a single-walled carbon nanotube (SWNT) manufacturing process. The study results provide optimal production strategies and alternatives. It reveal that a high control measure guarantees that environmental health and safety (EHS) standards regulations are met, while a lower control level leads to increased risk of violating EHS regulations. The CCNLP optimization approach is a decision support tool for the optimization of the increasing MNMS manufacturing with workplace safety constraints under uncertainties. PMID:23531490

Management of occupational exposure to engineered nanoparticles through a chance-constrained nonlinear programming approach.

PubMed

Chen, Zhi; Yuan, Yuan; Zhang, Shu-Shen; Chen, Yu; Yang, Feng-Lin

2013-03-26

Critical environmental and human health concerns are associated with the rapidly growing fields of nanotechnology and manufactured nanomaterials (MNMs). The main risk arises from occupational exposure via chronic inhalation of nanoparticles. This research presents a chance-constrained nonlinear programming (CCNLP) optimization approach, which is developed to maximize the nanaomaterial production and minimize the risks of workplace exposure to MNMs. The CCNLP method integrates nonlinear programming (NLP) and chance-constrained programming (CCP), and handles uncertainties associated with both the nanomaterial production and workplace exposure control. The CCNLP method was examined through a single-walled carbon nanotube (SWNT) manufacturing process. The study results provide optimal production strategies and alternatives. It reveal that a high control measure guarantees that environmental health and safety (EHS) standards regulations are met, while a lower control level leads to increased risk of violating EHS regulations. The CCNLP optimization approach is a decision support tool for the optimization of the increasing MNMS manufacturing with workplace safety constraints under uncertainties.

Simulation and evaluation of pollution load reduction scenarios for water environmental management: a case study of inflow river of Taihu Lake, China.

PubMed

Zhang, Ruibin; Qian, Xin; Zhu, Wenting; Gao, Hailong; Hu, Wei; Wang, Jinhua

2014-09-09

In the beginning of the 21st century, the deterioration of water quality in Taihu Lake, China, has caused widespread concern. The primary source of pollution in Taihu Lake is river inflows. Effective pollution load reduction scenarios need to be implemented in these rivers in order to improve the water quality of Taihu Lake. It is important to select appropriate pollution load reduction scenarios for achieving particular goals. The aim of this study was to facilitate the selection of appropriate scenarios. The QUAL2K model for river water quality was used to simulate the effects of a range of pollution load reduction scenarios in the Wujin River, which is one of the major inflow rivers of Taihu Lake. The model was calibrated for the year 2010 and validated for the year 2011. Various pollution load reduction scenarios were assessed using an analytic hierarchy process, and increasing rates of evaluation indicators were predicted using the Delphi method. The results showed that control of pollution from the source is the optimal method for pollution prevention and control, and the method of "Treatment after Pollution" has bad environmental, social and ecological effects. The method applied in this study can assist for environmental managers to select suitable pollution load reduction scenarios for achieving various objectives.

Simulation and Evaluation of Pollution Load Reduction Scenarios for Water Environmental Management: A Case Study of Inflow River of Taihu Lake, China

PubMed Central

Zhang, Ruibin; Qian, Xin; Zhu, Wenting; Gao, Hailong; Hu, Wei; Wang, Jinhua

2014-01-01

In the beginning of the 21st century, the deterioration of water quality in Taihu Lake, China, has caused widespread concern. The primary source of pollution in Taihu Lake is river inflows. Effective pollution load reduction scenarios need to be implemented in these rivers in order to improve the water quality of Taihu Lake. It is important to select appropriate pollution load reduction scenarios for achieving particular goals. The aim of this study was to facilitate the selection of appropriate scenarios. The QUAL2K model for river water quality was used to simulate the effects of a range of pollution load reduction scenarios in the Wujin River, which is one of the major inflow rivers of Taihu Lake. The model was calibrated for the year 2010 and validated for the year 2011. Various pollution load reduction scenarios were assessed using an analytic hierarchy process, and increasing rates of evaluation indicators were predicted using the Delphi method. The results showed that control of pollution from the source is the optimal method for pollution prevention and control, and the method of “Treatment after Pollution” has bad environmental, social and ecological effects. The method applied in this study can assist for environmental managers to select suitable pollution load reduction scenarios for achieving various objectives. PMID:25207492

Integrated Vegetation Management Fact Sheet

EPA Pesticide Factsheets

IVM is generally defined as the practice of promoting desirable, stable, low-growing plant communities that will resist invasion by tall growing tree species through the use of appropriate, environmentally-sound, and cost-effective control methods.

Water-assisted crystallization of mesoporous anatase TiO2 nanospheres

NASA Astrophysics Data System (ADS)

Li, Na; Zhang, Qiao; Joo, Ji Bong; Lu, Zhenda; Dahl, Michael; Gan, Yang; Yin, Yadong

2016-04-01

We report a facile water-assisted crystallization process for the conversion of amorphous sol-gel derived TiO2 into mesoporous anatase nanostructures with a high surface area and well-controlled porosity and crystallinity. As an alternative to conventional calcination methods, this approach works under very mild conditions and is therefore much desired for broad biological, environmental and catalytic applications.We report a facile water-assisted crystallization process for the conversion of amorphous sol-gel derived TiO2 into mesoporous anatase nanostructures with a high surface area and well-controlled porosity and crystallinity. As an alternative to conventional calcination methods, this approach works under very mild conditions and is therefore much desired for broad biological, environmental and catalytic applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr01892k

Multi-angle Indicators System of Non-point Pollution Source Assessment in Rural Areas: A Case Study Near Taihu Lake

NASA Astrophysics Data System (ADS)

Huang, Lei; Ban, Jie; Han, Yu Ting; Yang, Jie; Bi, Jun

2013-04-01

This study aims to identify key environmental risk sources contributing to water eutrophication and to suggest certain risk management strategies for rural areas. The multi-angle indicators included in the risk source assessment system were non-point source pollution, deficient waste treatment, and public awareness of environmental risk, which combined psychometric paradigm methods, the contingent valuation method, and personal interviews to describe the environmental sensitivity of local residents. Total risk values of different villages near Taihu Lake were calculated in the case study, which resulted in a geographic risk map showing which village was the critical risk source of Taihu eutrophication. The increased application of phosphorus (P) and nitrogen (N), loss vulnerability of pollutant, and a lack of environmental risk awareness led to more serious non-point pollution, especially in rural China. Interesting results revealed by the quotient between the scores of objective risk sources and subjective risk sources showed what should be improved for each study village. More environmental investments, control of agricultural activities, and promotion of environmental education are critical considerations for rural environmental management. These findings are helpful for developing targeted and effective risk management strategies in rural areas.

Revision of Viable Environmental Monitoring in a Development Pilot Plant Based on Quality Risk Assessment: A Case Study.

PubMed

Ziegler, Ildikó; Borbély-Jakab, Judit; Sugó, Lilla; Kovács, Réka J

2017-01-01

In this case study, the principles of quality risk management were applied to review sampling points and monitoring frequencies in the hormonal tableting unit of a formulation development pilot plant. In the cleanroom area, premises of different functions are located. Therefore a general method was established for risk evaluation based on the Hazard Analysis and Critical Control Points (HACCP) method to evaluate these premises (i.e., production area itself and ancillary clean areas) from the point of view of microbial load and state in order to observe whether the existing monitoring program met the emerged advanced monitoring practice. LAY ABSTRACT: In pharmaceutical production, cleanrooms are needed for the manufacturing of final dosage forms of drugs-intended for human or veterinary use-in order to protect the patient's weakened body from further infections. Cleanrooms are premises with a controlled level of contamination that is specified by the number of particles per cubic meter at a specified particle size or number of microorganisms (i.e. microbial count) per surface area. To ensure a low microbial count over time, microorganisms are detected and counted by environmental monitoring methods regularly. It is reasonable to find the easily infected places by risk analysis to make sure the obtained results really represent the state of the whole room. This paper presents a risk analysis method for the optimization of environmental monitoring and verification of the suitability of the method. © PDA, Inc. 2017.

Effects of abiotic factors on the nanostructure of diatom frustules-ranges and variability.

PubMed

Su, Yanyan; Lundholm, Nina; Ellegaard, Marianne

2018-05-26

The intricate patterning of diatom silica frustules at nanometer-to-micrometer scales makes them of interest for a wide range of industrial applications. For some of these applications, a specific size range in nanostructure is required and may be achieved by selecting species with the desired properties. However, as all biological materials, diatom frustules exhibit variability in their morphological parameters and this variability can to some extent be affected and controlled by environmental conditions. In this review, we explore the effects of different environmental factors including salinity, heavy metals, temperature, pH, extracellular Si(OH) 4 or Ge(OH) 4 concentration, light regime, UV irradiance, long-term cultivation, and biotic factors on the nanostructure of diatom frustules. This compilation of studies illustrates that it is possible to affect the nanostructure of diatom frustules in vivo by controlling different environmental factors as well as by direct chemical modification of frustules. We compare these methods and present examples of how these changes affect the range of variability as well as comparing the magnitude of size changes of the most promising methods.

RAPD- and ERIC-Based Typing of Clinical and Environmental Pseudomonas aeruginosa Isolates.

PubMed

Auda, Ibtesam Ghadban; Al-Kadmy, Israa M S; Kareem, Sawsan Mohammed; Lafta, Aliaa Khyuon; A'Affus, Mustafa Hussein Obeid; Khit, Ibrahim Abd Aloahd; Al Kheraif, Abdulaziz Abdullah; Divakar, Darshan Devang; Ramakrishnaiah, Ravikumar

2017-03-01

Pseudomonas aeruginosa is a major cause of nosocomial infection in children and adults, resulting in significant morbidity and mortality due to its ability to acquire drug resistance. The ability of P. aeruginosa in the environment to cause infection in individuals has been reported previously; henceforth, surveillance of the emergence and transmission of P. aeruginosa strains among patients is important for infection control in a clinical setup. Various gene-typing methods have been used for epidemiological typing of P. aeruginosa isolates for the purpose of surveillance. In this work, the suitability and comparability of two typing methods, enterobacterial repetitive intergenic consensus (ERIC)-PCR and random amplification of polymorphic DNA (RAPD)-PCR fingerprinting, were studied to characterize P. aeruginosa strains isolated from clinical and environmental sources. Forty-four clinical and environmental bacterial isolates of P. aeruginosa were collected between October 2015 and January 2016. DNA extraction, ERIC-PCR and RAPD-PCR, agarose gel electrophoresis, and phylogenetic analyses were carried using the unweighted pair-group method with mean. RAPD typing revealed less clonality among clinical isolates, whereas the ERIC method showed greater similarity in comparison with RAPD. Environmental isolates, however, showed greater similarity using RAPD compared with ERIC typing. With only a few exceptions, most clinical isolates were distinct from environmental isolates, irrespective of the typing method. In conclusion, both the RAPD and ERIC typing methods proved to be good tools in understanding clonal diversity. The results also suggest that there is no relationship between clinical and environmental isolates. The absence of clonality among the clinical isolates may indicate that most P. aeruginosa infection cases could be endemic and not epidemic and that endemic infections may be due to nonclonal strains of P. aeruginosa.

The Development of Improved Risk Assessment Methods for Use in Industrial Environmental Management Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manners, T.K.

2006-07-01

Industrial sites that store or use chemicals are controlled in the UK under the COMAH (Control Of Major Accident Hazards) Regulations 1999 [1] based on their holdings of 'Dangerous Substances'. The COMAH Regulations [1] came into force in 1999 and are the UK's response to the European Union's Seveso II Directive. The purpose of these Regulations [1] is to: - Identify Major Accident Hazards (MAH); - Ensure that control measures are in place to prevent a MAH; - Ensure that mitigatory measures are in place to limit effects if MAH do occur. The UK's Health and Safety Executive (HSE), andmore » the Environment Agency (EA) jointly enforce the Regulations [1]. The fundamental requirement is given in the statement below, which is taken directly from the Regulations [1]. 'Every operator shall take all measures necessary to prevent major accidents and limit their consequences to persons and the environment'. This paper describes the development of a six-step screening methodology designed to identify Major Accidents To The Environment (MATTE) and improved consequence definitions that can be used in risk matrices to define the severity of an environmental fault. The method has been designed to be compatible with existing Environmental Management Systems (EMS) used in the chemical and nuclear industry. (authors)« less

Test methods for environment-assisted cracking

NASA Astrophysics Data System (ADS)

Turnbull, A.

1992-03-01

The test methods for assessing environment assisted cracking of metals in aqueous solution are described. The advantages and disadvantages are examined and the interrelationship between results from different test methods is discussed. The source of differences in susceptibility to cracking occasionally observed from the varied mechanical test methods arises often from the variation between environmental parameters in the different test conditions and the lack of adequate specification, monitoring, and control of environmental variables. Time is also a significant factor when comparing results from short term tests with long exposure tests. In addition to these factors, the intrinsic difference in the important mechanical variables, such as strain rate, associated with the various mechanical tests methods can change the apparent sensitivity of the material to stress corrosion cracking. The increasing economic pressure for more accelerated testing is in conflict with the characteristic time dependence of corrosion processes. Unreliable results may be inevitable in some cases but improved understanding of mechanisms and the development of mechanistically based models of environment assisted cracking which incorporate the key mechanical, material, and environmental variables can provide the framework for a more realistic interpretation of short term data.

Concurrent determination of 237Np and Pu isotopes using ICP-MS: analysis of NIST environmental matrix standard reference materials 4357, 1646a, and 2702.

PubMed

Matteson, Brent S; Hanson, Susan K; Miller, Jeffrey L; Oldham, Warren J

2015-04-01

An optimized method was developed to analyze environmental soil and sediment samples for (237)Np, (239)Pu, and (240)Pu by ICP-MS using a (242)Pu isotope dilution standard. The high yield, short time frame required for analysis, and the commercial availability of the (242)Pu tracer are significant advantages of the method. Control experiments designed to assess method uncertainty, including variation in inter-element fractionation that occurs during the purification protocol, suggest that the overall precision for measurements of (237)Np is typically on the order of ± 5%. Measurements of the (237)Np concentration in a Peruvian Soil blank (NIST SRM 4355) spiked with a known concentration of (237)Np tracer confirmed the accuracy of the method, agreeing well with the expected value. The method has been used to determine neptunium and plutonium concentrations in several environmental matrix standard reference materials available from NIST: SRM 4357 (Radioactivity Standard), SRM 1646a (Estuarine Sediment) and SRM 2702 (Inorganics in Marine Sediment). Copyright © 2015 Elsevier Ltd. All rights reserved.

Comparison of conventional and bio-treated methods as dust suppressants.

PubMed

Naeimi, Maryam; Chu, Jian

2017-10-01

Dust is an environmental, geotechnical, health, and economical hazard. Fugitive dust emanating along transportation systems such as roads, railways, and airports especially can have significant impacts on health, safety, material loss, cost of maintenance, and interfere with the facilities. Quantitative studies on the effectiveness of the proper dust palliatives and their environmental impact have been studied with a number of biological and chemical methods. The objective of this study was to establish a method for using the microbial Induced calcium carbonate precipitation (MICP) approach to reduce the percent of mass loss against erosive force of wind regarding to the concentration and characteristics of aggregate used, climate, and traffic amounts. The results of this study showed that the required precipitation for dust control of sand by 70% is less than 15 g CaCO 3 /m 2 between sand grains in bio-treated sand. The wind tunnel test results of this study also indicate that the effectiveness of the bio-treatment method for dust control depends on many variables, such as the percent of precipitated calcium carbonate and tensile strength.

Lyme disease and conservation

USGS Publications Warehouse

Ginsberg, H.

1994-01-01

Lyme disease is a tick-borne illness that is wide-spread in North America, especially in the northeastern and northcentral United States. This disease could negatively influence efforts to conserve natural populations in two ways: (1) the disease could directly affect wild animal health; and (2) tick control efforts could adversely affect natural populations and communities. Lyme disease affects several domestic animals, but symptoms have been reported in only a few wild species. Direct effects of Lyme disease on wild animal populations have not been reported, but the disease should be considered as a possible cause in cases of unexplained population declines in endemic areas. Methods available to manage ticks and Lyme disease include human self-protection techniques, manipulation of habitats and hosts species populations, biological control, and pesticide applications. The diversity of available techniques allows selection of approaches to minimize environmental effects by (1) emphasizing personal protection techniques, (2) carefully targeting management efforts to maximize efficiency, and (3) integrating environmentally benign techniques to improve management while avoiding broad-scale environmentally destructive approaches. The environmental effects of Lyme disease depend, to a large extent, on the methods chosen to minimize human exposure to infected ticks. Conservation biologists can help design tick management programs that effectively lower the incidence of human Lyme disease while simultaneously minimizing negative effects on natural populations.

Design and evaluation of a bioreactor with application to forensic burial environments.

PubMed

Dunphy, Melissa A; Weisensee, Katherine E; Mikhailova, Elena A; Harman, Melinda K

2015-12-01

Existing forensic taphonomic methods lack specificity in estimating the postmortem interval (PMI) in the period following active decomposition. New methods, such as the use of citrate concentration in bone, are currently being considered; however, determining the applicability of these methods in differing environmental contexts is challenging. This research aims to design a forensic bioreactor that can account for environmental factors known to impact decomposition, specifically temperature, moisture, physical damage from animals, burial depth, soil pH, and organic matter content. These forensically relevant environmental variables were characterized in a soil science context. The resulting metrics were soil temperature regime, soil moisture regime, slope, texture, soil horizon, cation exchange capacity, soil pH, and organic matter content. Bioreactor chambers were constructed using sterilized thin-walled polystyrene boxes housed in calibrated temperature units. Gravesoil was represented using mineral soil (Ultisols), and organic soil proxy for Histosols, horticulture mix. Gravesoil depth was determined using mineral soil horizons A and Bt2 to simulate surface scatter and shallow grave burial respectively. A total of fourteen different environmental conditions were created and controlled successfully over a 90-day experiment. These results demonstrate successful implementation and control of forensic bioreactor simulating precise environments in a single research location, rather than site-specific testing occurring in different geographic regions. Bone sections were grossly assessed for weathering characteristics, which revealed notable differences related to exposure to different temperature regimes and soil types. Over the short 90-day duration of this experiment, changes in weathering characteristics were more evident across the different temperature regimes rather than the soil types. Using this methodology, bioreactor systems can be created to replicate many different clandestine burial contexts, which will allow for the more rapid understanding of environmental effects on skeletal remains. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

30 CFR 250.1606 - Control of wells.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL... and safest drilling technologies and state-of-the-art methods to evaluate and minimize the potential..., equipment, natural resources, and the environment. ...

30 CFR 250.1606 - Control of wells.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL... and safest drilling technologies and state-of-the-art methods to evaluate and minimize the potential..., equipment, natural resources, and the environment. ...

30 CFR 250.1606 - Control of wells.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL... and safest drilling technologies and state-of-the-art methods to evaluate and minimize the potential..., equipment, natural resources, and the environment. ...

Environmental scan of infection prevention and control practices for containment of hospital-acquired infectious disease outbreaks in acute care hospital settings across Canada.

PubMed

Ocampo, Wrechelle; Geransar, Rose; Clayden, Nancy; Jones, Jessica; de Grood, Jill; Joffe, Mark; Taylor, Geoffrey; Missaghi, Bayan; Pearce, Craig; Ghali, William; Conly, John

2017-10-01

Ward closure is a method of controlling hospital-acquired infectious diseases outbreaks and is often coupled with other practices. However, the value and efficacy of ward closures remains uncertain. To understand the current practices and perceptions with respect to ward closure for hospital-acquired infectious disease outbreaks in acute care hospital settings across Canada. A Web-based environmental scan survey was developed by a team of infection prevention and control (IPC) experts and distributed to 235 IPC professionals at acute care sites across Canada. Data were analyzed using a mixed-methods approach of descriptive statistics and thematic analysis. A total of 110 completed responses showed that 70% of sites reported at least 1 outbreak during 2013, 44% of these sites reported the use of ward closure. Ward closure was considered an "appropriate," "sometimes appropriate," or "not appropriate" strategy to control outbreaks by 50%, 45%, and 5% of participants, respectively. System capacity issues and overall risk assessment were main factors influencing the decision to close hospital wards following an outbreak. Results suggest the use of ward closure for containment of hospital-acquired infectious disease outbreaks in Canadian acute care health settings is mixed, with outbreak control methods varying. The successful implementation of ward closure was dependent on overall support for the IPC team within hospital administration. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Control of a Clonal Outbreak of Multidrug-Resistant Acinetobacter baumannii in a Hospital of the Basque Country after the Introduction of Environmental Cleaning Led by the Systematic Sampling from Environmental Objects.

PubMed

Delgado Naranjo, Jesús; Villate Navarro, José Ignacio; Sota Busselo, Mercedes; Martínez Ruíz, Alberto; Hernández Hernández, José María; Torres Garmendia, María Pilar; Urcelay López, María Isabel

2013-01-01

Background. Between July 2009 and September 2010, an outbreak of multidrug-resistant (MDR) Acinetobacter baumannii was detected in one critical care unit of a tertiary hospital in the Basque Country, involving 49 infected and 16 colonized patients. The aim was to evaluate the impact of environmental cleaning and systematic sampling from environmental objects on the risk of infection by MDR A. baumannii. Methods. After systematic sampling from environmental objects and molecular typing of all new MDR A. baumannii strains from patients and environmental isolates, we analyzed the correlation (Pearson's r) between new infected cases and positive environmental samples. The risk ratio (RR) of infection was estimated with Poisson regression. Results. The risk increased significantly with the number of positive samples in common areas (RR = 1.40; 95%CI = 0.99-1.94) and positive samples in boxes (RR = 1.19; 95%CI = 1.01-1.40). The number of cases also positively correlated with positive samples in boxes (r = 0.50; P < 0.05) and common areas (r = 0.29; P = 0.18). Conclusion. Once conventional measures have failed, environmental cleaning, guided by systematic sampling from environmental objects, provided the objective risk reduction of new cases and enabled the full control of the outbreak.

Environmental management: a re-emerging vector control strategy.

PubMed

Ault, S K

1994-01-01

Vector control may be accomplished by environmental management (EM), which consists of permanent or long-term modification of the environment, temporary or seasonal manipulation of the environment, and modifying or changing our life styles and practices to reduce human contact with infective vectors. The primary focus of this paper is EM in the control of human malaria, filariasis, arboviruses, Chagas' disease, and schistosomiasis. Modern EM developed as a discipline based primarily in ecologic principles and lessons learned from the adverse environmental impacts of rural development projects. Strategies such as the suppression of vector populations through the provision of safe water supplies, proper sanitation, solid waste management facilities, sewerage and excreta disposal systems, water manipulation in dams and irrigation systems, vector diversion by zooprophylaxis, and vector exclusion by improved housing, are discussed with appropriate examples. Vectors of malaria, filariasis, Chagas' disease, and schistosomiasis have been controlled by drainage or filling aquatic breeding sites, improved housing and sanitation, the use of expanded polystyrene beads, zooprophylaxis, or the provision of household water supplies. Community participation has been effective in the suppression of dengue vectors in Mexico and the Dominican Republic. Alone or combined with other vector control methods, EM has been proven to be a successful approach to vector control in a number of places. The future of EM in vector control looks promising.

Application of Hyphenated Techniques in Speciation Analysis of Arsenic, Antimony, and Thallium

PubMed Central

Michalski, Rajmund; Szopa, Sebastian; Jabłońska, Magdalena; Łyko, Aleksandra

2012-01-01

Due to the fact that metals and metalloids have a strong impact on the environment, the methods of their determination and speciation have received special attention in recent years. Arsenic, antimony, and thallium are important examples of such toxic elements. Their speciation is especially important in the environmental and biomedical fields because of their toxicity, bioavailability, and reactivity. Recently, speciation analytics has been playing a unique role in the studies of biogeochemical cycles of chemical compounds, determination of toxicity and ecotoxicity of selected elements, quality control of food products, control of medicines and pharmaceutical products, technological process control, research on the impact of technological installation on the environment, examination of occupational exposure, and clinical analysis. Conventional methods are usually labor intensive, time consuming, and susceptible to interferences. The hyphenated techniques, in which separation method is coupled with multidimensional detectors, have become useful alternatives. The main advantages of those techniques consist in extremely low detection and quantification limits, insignificant interference, influence as well as high precision and repeatability of the determinations. In view of their importance, the present work overviews and discusses different hyphenated techniques used for arsenic, antimony, and thallium species analysis, in different clinical, environmental and food matrices. PMID:22654649

A review of the biology and control of the coffee berry borer, Hypothenemus hampei (Coleoptera: Scolytidae).

PubMed

Damon, A

2000-12-01

The coffee berry borer, Hypothenemus hampei Ferrari, is a serious problem for the majority of the world's coffee growers and has proved to be one of the most intractable of present day pests. Despite a great deal of research, control still depends largely on the application of the organochlorine insecticide endosulfan, which is damaging to the environment, or a series of cultural and biological control methods which give variable and unpredictable results. This review summarizes the most important aspects of the biology and ecology of H. hampei and its control and identifies weak points in the knowledge about this pest. Emphasis is placed upon an analysis of the non-chemical control methods available and suggestions are offered for novel ecological and environmental factors worthy of further research, in the search for viable and sustainable control methods.

Most Probable Number Rapid Viability PCR Method to Detect Viable Spores of Bacillus anthracis in Swab Samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Letant, S E; Kane, S R; Murphy, G A

2008-05-30

This note presents a comparison of Most-Probable-Number Rapid Viability (MPN-RV) PCR and traditional culture methods for the quantification of Bacillus anthracis Sterne spores in macrofoam swabs generated by the Centers for Disease Control and Prevention (CDC) for a multi-center validation study aimed at testing environmental swab processing methods for recovery, detection, and quantification of viable B. anthracis spores from surfaces. Results show that spore numbers provided by the MPN RV-PCR method were in statistical agreement with the CDC conventional culture method for all three levels of spores tested (10{sup 4}, 10{sup 2}, and 10 spores) even in the presence ofmore » dirt. In addition to detecting low levels of spores in environmental conditions, the MPN RV-PCR method is specific, and compatible with automated high-throughput sample processing and analysis protocols.« less

21 CFR 1271.195 - Environmental control and monitoring.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of, environmental control and monitoring activities. ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Environmental control and monitoring. 1271.195... control and monitoring. (a) Environmental control. Where environmental conditions could reasonably be...

21 CFR 1271.195 - Environmental control and monitoring.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of, environmental control and monitoring activities. ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Environmental control and monitoring. 1271.195... control and monitoring. (a) Environmental control. Where environmental conditions could reasonably be...

21 CFR 1271.195 - Environmental control and monitoring.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of, environmental control and monitoring activities. ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Environmental control and monitoring. 1271.195... control and monitoring. (a) Environmental control. Where environmental conditions could reasonably be...

21 CFR 1271.195 - Environmental control and monitoring.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of, environmental control and monitoring activities. ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Environmental control and monitoring. 1271.195... control and monitoring. (a) Environmental control. Where environmental conditions could reasonably be...

Two Persons with Multiple Disabilities Use Camera-Based Microswitch Technology to Control Stimulation with Small Mouth and Eyelid Responses

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Bellini, Domenico; Oliva, Doretta; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Lang, Russell

2012-01-01

Background: A camera-based microswitch technology was recently developed to monitor small facial responses of persons with multiple disabilities and allow those responses to control environmental stimulation. This study assessed such a technology with 2 new participants using slight variations of previous responses. Method: The technology involved…

The issues of weed infestation with environmentally hazardous plants and methods of their control

NASA Astrophysics Data System (ADS)

Bogdanov, V. L.; Posternak, T. S.; Pasko, O. A.; Kovyazin, V. F.

2016-09-01

The authors analyze expansion of segetal and ruderal vegetation on agricultural lands in Leningrad and Tomsk oblasts, typical for the European and Asian parts of Russia. The spreading conditions, composition of species, biological features and ecological requirements of the most aggressive species are identified. Some effective ways of weed control are suggested.

Evaluation and control of environmental corrosion for aluminum and steel alloys

NASA Technical Reports Server (NTRS)

Franklin, D. B.

1977-01-01

Corrosion protection systems for aerospace application and the effects of surface treatments and methods of controlling stress corrosion are evaluated. Chromate pigmented systems were found to be most effective for aluminum alloys; zinc-rich coatings gave the greatest protection to steel alloys. Various steel and aluminum alloys are rated for stress corrosion resistance.

The Hazardous-Drums Project: A Multiweek Laboratory Exercise for General Chemistry Involving Environmental, Quality Control, and Cost Evaluation

ERIC Educational Resources Information Center

Hayes, David; Widanski, Bozena

2013-01-01

A laboratory experiment is described that introduces students to "real-world" hazardous waste management issues chemists face. The students are required to define an analytical problem, choose a laboratory analysis method, investigate cost factors, consider quality-control issues, interpret the meaning of results, and provide management…

Groundwater-quality and quality-control data for two monitoring wells near Pavillion, Wyoming, April and May 2012

USGS Publications Warehouse

Wright, Peter R.; McMahon, Peter B.; Mueller, David K.; Clark, Melanie L.

2012-01-01

In June 2010, the U.S. Environmental Protection Agency installed two deep monitoring wells (MW01 and MW02) near Pavillion, Wyoming, to study groundwater quality. During April and May 2012, the U.S Geological Survey, in cooperation with the Wyoming Department of Environmental Quality, collected groundwater-quality data and quality-control data from monitoring well MW01 and, following well redevelopment, quality-control data for monitoring well MW02. Two groundwater-quality samples were collected from well MW01—one sample was collected after purging about 1.5 borehole volumes, and a second sample was collected after purging 3 borehole volumes. Both samples were collected and processed using methods designed to minimize atmospheric contamination or changes to water chemistry. Groundwater-quality samples were analyzed for field water-quality properties (water temperature, pH, specific conductance, dissolved oxygen, oxidation potential); inorganic constituents including naturally occurring radioactive compounds (radon, radium-226 and radium-228); organic constituents; dissolved gasses; stable isotopes of methane, water, and dissolved inorganic carbon; and environmental tracers (carbon-14, chlorofluorocarbons, sulfur hexafluoride, tritium, helium, neon, argon, krypton, xenon, and the ratio of helium-3 to helium-4). Quality-control sample results associated with well MW01 were evaluated to determine the extent to which environmental sample analytical results were affected by bias and to evaluate the variability inherent to sample collection and laboratory analyses. Field documentation, environmental data, and quality-control data for activities that occurred at the two monitoring wells during April and May 2012 are presented.

Environmental Chemicals in Urine and Blood: Improving Methods for Creatinine and Lipid Adjustment

PubMed Central

O’Brien, Katie M.; Upson, Kristen; Cook, Nancy R.; Weinberg, Clarice R.

2015-01-01

Background Investigators measuring exposure biomarkers in urine typically adjust for creatinine to account for dilution-dependent sample variation in urine concentrations. Similarly, it is standard to adjust for serum lipids when measuring lipophilic chemicals in serum. However, there is controversy regarding the best approach, and existing methods may not effectively correct for measurement error. Objectives We compared adjustment methods, including novel approaches, using simulated case–control data. Methods Using a directed acyclic graph framework, we defined six causal scenarios for epidemiologic studies of environmental chemicals measured in urine or serum. The scenarios include variables known to influence creatinine (e.g., age and hydration) or serum lipid levels (e.g., body mass index and recent fat intake). Over a range of true effect sizes, we analyzed each scenario using seven adjustment approaches and estimated the corresponding bias and confidence interval coverage across 1,000 simulated studies. Results For urinary biomarker measurements, our novel method, which incorporates both covariate-adjusted standardization and the inclusion of creatinine as a covariate in the regression model, had low bias and possessed 95% confidence interval coverage of nearly 95% for most simulated scenarios. For serum biomarker measurements, a similar approach involving standardization plus serum lipid level adjustment generally performed well. Conclusions To control measurement error bias caused by variations in serum lipids or by urinary diluteness, we recommend improved methods for standardizing exposure concentrations across individuals. Citation O’Brien KM, Upson K, Cook NR, Weinberg CR. 2016. Environmental chemicals in urine and blood: improving methods for creatinine and lipid adjustment. Environ Health Perspect 124:220–227; http://dx.doi.org/10.1289/ehp.1509693 PMID:26219104

Use of Vaporized Hydrogen Peroxide Decontamination during an Outbreak of Multidrug-Resistant Acinetobacter baumannii Infection at a Long-Term Acute Care Hospital

PubMed Central

Ray, Amy; Perez, Federico; Beltramini, Amanda M.; Jakubowycz, Marta; Dimick, Patricia; Jacobs, Michael R.; Roman, Kathy; Bonomo, Robert A.; Salata, Robert A.

2013-01-01

OBJECTIVES To describe vaporized hydrogen peroxide (VHP) as an adjuvant in the control of multidrug-resistant (MDR) Acinetobacter baumannii infection in a long-term acute care hospital (LTACH) and to describe the risk factors for acquisition of MDR A. baumannii infection in the LTACH population. DESIGN Outbreak investigation, case-control study, and before-after intervention trial. SETTING A 54-bed LTACH affiliated with a tertiary care center in northeastern Ohio. METHODS Investigation of outbreak with clinical and environmental cultures, antimicrobial susceptibility testing, polymerase chain reaction assay of repetitive chromosomal elements to type strains, and case-control study; and intervention consisting of comprehensive infection control measures and VHP environmental decontamination. RESULTS Thirteen patients infected or colonized with MDR A. baumannii were identified from January 2008 through June 2008. By susceptibility testing, 10 (77%) of the 13 isolates were carbapenem-resistant. MDR A. baumannii was found in wound samples, blood, sputum, and urine. Wounds were identified as a risk factor for MDR A. baumannii colonization. Ventilator–associated pneumonia was the most common clinical syndrome caused by the pathogen, and the associated mortality was 14% (2 of the 13 case patients died). MDR A. baumannii was found in 8 of 93 environmental samples, including patient rooms and a wound care cart; environmental and clinical cultures were genetically related. Environmental cultures were negative immediately after VHP decontamination and both 24 hours and 1 week after VHP decontamination. Nosocomial acquisition of the pathogen in the LTACH ceased after VHP intervention. When patients colonized with MDR A. baumannii reoccupied rooms, environmental contamination recurred. CONCLUSION Environmental decontamination using VHP combined with comprehensive infection control measures interrupted nosocomial transmission of MDR A. baumannii in an LTACH. The application of this novel approach to halt the transmission of MDR A. baumannii warrants further investigation. PMID:20973723

Putting environmental economics in perspective: case study of Four Corners Power Plant, New Mexico.

PubMed Central

Bartlit, J R

1979-01-01

Environmental control costs can be made to appear much larger in impact than they actually are by placing costs in misleading contexts or failing to provide perspective. It is essential for continued public support of environmental health programs that this practice be countered by more meaningful presentations of economic data. As an example, analytic methods appropriate to the case of a large coal-fired power plant in northwestern New Mexico are developed and disucssed. Pollution control expenditures at the Four Corners Power Plant in northwestern New Mexico were presented to the public as costing $82 annually. Although this figure may be the correct one, data were collected and analyzed to show that this cost represented an increase of only 5 to 60 cents on a $100 electricity bill for the consumer of electricity. PMID:507248

Application of quality risk management to set viable environmental monitoring frequencies in biotechnology processing and support areas.

PubMed

Sandle, Tim

2012-01-01

Environmental monitoring programs are essential for pharmaceutical facilities in order to assess the level of environmental control. For biotechnology facilities there is little advice as to the frequency at which viable environmental monitoring should be conducted. This paper outlines an approach, based on the principles of quality risk management, for the development of a framework from which monitoring frequencies can be determined. This involved the identification of common hazards and the evaluation those hazards in terms of the severity of contamination and the probability of contamination occurring. These elements of risk were evaluated for different cleanrooms and the relative risks ranked. Once the risk scores were calculated, the methods for detecting risks within the cleanrooms were assessed. Risk filtering was then used to group different cleanrooms based on their relative risks and detection methods against predetermined monitoring frequencies. Through use of case study examples, the paper presents the model and describes how appropriate frequencies for the environmental monitoring of cleanrooms can be set. Cleanrooms in which biotechnology pharmaceutical processing takes place are subject to environmental monitoring. The frequency at which such monitoring should be performed can be difficult to determine. This paper uses quality risk assessment methods to construct a framework for determining monitoring frequencies and illustrates the suitability of the framework through a case study.

The assessment of eco-design with a comprehensive index incorporating environmental impact and economic profit

NASA Astrophysics Data System (ADS)

Yang, Shuo; Fu, Yun; Wang, Xiuteng; Xu, Bingsheng; Li, Zheng

2017-11-01

Eco-design is an advanced design approach which plays an important part in the national innovation project and serves as a key point for the successful transformation of the supply structure. However, the practical implementation of the pro-environmental designs and technologies always faces a dilemma situation, where some processes can effectively control their emissions to protect the environment at relatively high costs, while others pursue the individual interest in making profit by ignoring the possible adverse environmental impacts. Thus, the assessment on the eco-design process must be carried out based on the comprehensive consideration of the economic and environmental aspects. Presently, the assessment systems in China are unable to fully reflect the new environmental technologies regarding their innovative features or performance. Most of the assessment systems adopt scoring method based on the judgments of the experts, which are easy to use but somewhat subjective. The assessment method presented in this paper includes the environmental impact (EI) assessment based on LCA principal and willingness-to-pay theory, and economic profit (EP) assessment mainly based on market price. The results from the assessment are in the form of EI/EP, which evaluate the targeted process from a combined perspective of environmental and economic performance. A case study was carried out upon the utilization process of coal fly ash, which indicates the proposed method can compare different technical processes in an effective and objective manner, and provide explicit and insightful suggestions for decision making.

Recent developments in the field of environmental reference materials at the JRC Ispra.

PubMed

Muntau, H

2001-06-01

The production of reference materials for environmental analysis started in the Joint Research Centre at Ispra/Italy in 1972 with the objective of later certification by the BCR, but for obvious budget reasons only a fraction of the total production achieved at Ispra ever reached certification level, although all materials were produced according to the severe quality requirements requested for certified reference materials. Therefore, the materials not destinated to certification are in growing demand as inter-laboratory test materials and as laboratory reference materials, for internal quality control, e.g., by control charts. The history of reference material production within the Joint Research Centre is briefly reviewed and the latest additions described. New developments such as micro-scale reference materials intended for analytical methods requiring sample intakes at milligram or sub-milligram level and therefor not finding supply on the reference material market, and "wet" environmental reference materials, which meet more precisely the "real-world" environmental analysis conditions, are presented and the state-of-the-art discussed.

Comparison of radar and infrared distance sensors for intelligent cruise control systems

NASA Astrophysics Data System (ADS)

Hoess, Alfred; Hosp, Werner; Rauner, Hans

1995-09-01

In this paper, infrared distance sensors are compared regarding technology, environmental, and practical aspects. Different methods for obtaining lateral resolution and covering the required detection range are presented for both sensor technologies. Possible positions for sensor installation at the test vehicle have been tested. Experimental results regarding cleaning devices and other environmental problems are presented. Finally, future aspects, e.g. speed over ground measurements or technological steps are discussed.

Assessment of Pb, Cd, Cr and Ag leaching from electronics waste using four extraction methods.

PubMed

Keith, Ashley; Keesling, Kara; Fitzwater, Kendra K; Pichtel, John; Houy, Denise

2008-12-01

Heavy metals present in electronic components may leach upon disposal and therefore pose significant environmental hazards. The potential leaching of Pb, Cd, Cr and Ag from PC cathode ray tubes, printed circuit boards (PCBs), PC mice, TV remote controls, and mobile phones was assessed. After controlled crushing, each component was extracted using the Toxicity Characteristic Leaching Procedure (TCLP), EPA Method 1312 (SPLP), NEN 7371 (Dutch Environmental Agency), and DIN S4 (Germany). The TCLP consistently leached the greatest amounts of Pb from all components. The SPLP, NEN 7371 and DIN S4 extracted relatively small amounts of metals compared with the TCLP and were not considered effective as leaching tests for e-waste. The smallest size fraction (< 2 mm) of CRT glass and PCBs leached significantly (p < 0.05) highest Pb via the TCLP. A modified TCLP removed 50.9% more extractable Pb compared with the conventional procedure.

Low Emissions and Delay Optimization for an Isolated Signalized Intersection Based on Vehicular Trajectories

PubMed Central

2015-01-01

A traditional traffic signal control system is established based on vehicular delay, queue length, saturation and other indicators. However, due to the increasing severity of urban environmental pollution issues and the development of a resource-saving and environmentally friendly social philosophy, the development of low-carbon and energy-efficient urban transport is required. This paper first defines vehicular trajectories and the calculation of vehicular emissions based on VSP. Next, a regression analysis method is used to quantify the relationship between vehicular emissions and delay, and a traffic signal control model is established to reduce emissions and delay using the enumeration method combined with saturation constraints. Finally, one typical intersection of Changchun is selected to verify the model proposed in this paper; its performance efficiency is also compared using simulations in VISSIM. The results of this study show that the proposed model can significantly reduce vehicle delay and traffic emissions simultaneously. PMID:26720095

Low Emissions and Delay Optimization for an Isolated Signalized Intersection Based on Vehicular Trajectories.

PubMed

Lin, Ciyun; Gong, Bowen; Qu, Xin

2015-01-01

A traditional traffic signal control system is established based on vehicular delay, queue length, saturation and other indicators. However, due to the increasing severity of urban environmental pollution issues and the development of a resource-saving and environmentally friendly social philosophy, the development of low-carbon and energy-efficient urban transport is required. This paper first defines vehicular trajectories and the calculation of vehicular emissions based on VSP. Next, a regression analysis method is used to quantify the relationship between vehicular emissions and delay, and a traffic signal control model is established to reduce emissions and delay using the enumeration method combined with saturation constraints. Finally, one typical intersection of Changchun is selected to verify the model proposed in this paper; its performance efficiency is also compared using simulations in VISSIM. The results of this study show that the proposed model can significantly reduce vehicle delay and traffic emissions simultaneously.

Research on flight stability performance of rotor aircraft based on visual servo control method

NASA Astrophysics Data System (ADS)

Yu, Yanan; Chen, Jing

2016-11-01

control method based on visual servo feedback is proposed, which is used to improve the attitude of a quad-rotor aircraft and to enhance its flight stability. Ground target images are obtained by a visual platform fixed on aircraft. Scale invariant feature transform (SIFT) algorism is used to extract image feature information. According to the image characteristic analysis, fast motion estimation is completed and used as an input signal of PID flight control system to realize real-time status adjustment in flight process. Imaging tests and simulation results show that the method proposed acts good performance in terms of flight stability compensation and attitude adjustment. The response speed and control precision meets the requirements of actual use, which is able to reduce or even eliminate the influence of environmental disturbance. So the method proposed has certain research value to solve the problem of aircraft's anti-disturbance.

Measuring the quality of infection control in Dutch nursing homes using a standardized method; the Infection prevention RIsk Scan (IRIS)

PubMed Central

2014-01-01

Background We developed a standardised method to assess the quality of infection control in Dutch Nursing Home (NH), based on a cross-sectional survey that visualises the results. The method was called the Infection control RIsk Infection Scan (IRIS). We tested the applicability of this new tool in a multicentre surveillance executed June and July 2012. Methods The IRIS includes two patient outcome-variables, i.e. the prevalence of healthcare associated infections (HAI) and rectal carriage of Extended-Spectrum Beta-Lactamase (ESBL) producing Enterobacteriaceae (ESBL-E); two patient-related risk factors, i.e. use of medical devices, and antimicrobial therapy; and three ward-related risk factors, i.e. environmental contamination, availability of local guidelines, and shortcomings in infection prevention preconditions. Results were categorised as low-, intermediate- and high risk, presented in an easy-to-read graphic risk spider-plot. This plot was given as feedback to management and healthcare workers of the NH. Results Large differences were found among most the variables in the different NH. Common shortcomings were the availability of infection control guidelines and the level of environmental cleaning. Most striking differences were observed in the prevalence of ESBL carriage, ranged from zero to 20.6% (p < 0.001). Conclusions The IRIS provided a rapid and easy to understand assessment of the infection control situation of the participating NH. The results can be used to improve the quality of infection control based on the specific needs of a NH but needs further validation in future studies. Repeated measurement can determine the effectiveness of the interventions. This makes the IRIS a useful tool for quality systems. PMID:25243067

40 CFR 721.4040 - Glycols, polyethylene-, 3-sulfo-2-hydroxypropyl-p-(1,1,3,3-tetra-methylbutyl)phenyl ether, sodium...

Code of Federal Regulations, 2010 CFR

2010-07-01

... information, and any information on methods for protecting against such risk, into an MSDS as described at... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF... substance is any manner or method of manufacture, import, or processing associated with any use of this...

40 CFR 721.3152 - Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

Code of Federal Regulations, 2010 CFR

2010-07-01

... must incorporate this new information, and any information on methods for protecting against such risk....3152 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... significant new use of this substance is any manner or method of manufacture, import, or processing associated...

Recycling stainless steel orthodontic brackets with Er:YAG laser - An environmental scanning electron microscope and shear bond strength study.

PubMed

Chacko, Prince K; Kodoth, Jithesh; John, Jacob; Kumar, Kishore

2013-07-01

TO DETERMINE THE EFFICIENCY OF ERBIUM: Yttrium aluminum garnet (Er:YAG) laser with Environmental Scanning Electron Microscope (ESEM) and shear bond strength analysis as a method of recycling stainless steel orthodontic brackets and compare with other methods of recycling. Eighty samples of extracted premolar teeth bonded to SS brackets were tested for rebonded shear bond strength after recycling by four methods and compared with a control group of 20 samples. These 80 samples were randomized into four groups which were recycled by four methods, namely, sandblasting, thermal method, adhesive grinding by tungsten carbide bur, and Er: YAG laser method. After recycling, ESEM and shear bond strength analysis were used to analyze the efficiency of the recycling methods. ER: YAG laser group was found to be having the greatest bond strength among the recycled brackets (8.33±2.51 followed by the sandblasting at 6.12±1.12 MPa, thermal and electropolishing at 4.44±0.95 MPa, and lastly the adhesive grinding method at 3.08±1.07 MPa. The shear bond strength of Er: YAG laser group was found to be having no statistically significant difference with that of the control group (P>0.05 and had statistical signifance with sandblasting, thermal and electropolishing and adhesive grinding groups at P>0.001. ESEM analysis showed complete removal of adhesive from the brackets recycled with Er: YAG laser which mimicked that of the control group. ER: YAG laser (2940 nm) was found to be the most efficient method for recycling, followed by the sandblasting, thermal, and the tungsten carbide methods, which had the least shear bond strength value and is not fit for clinical usage.

Bee pollen as a bioindicator of environmental pesticide contamination.

PubMed

de Oliveira, Renata Cabrera; Queiroz, Sonia Claudia do Nascimento; da Luz, Cynthia Fernandes Pinto; Porto, Rafael Silveira; Rath, Susanne

2016-11-01

Honeybees and bee products are potential bioindicators of the presence of contaminants in the environment, enabling monitoring of large areas due to the long distances travelled by bees. This work evaluates the use of bee pollen as a bioindicator of environmental contamination by pesticides. A GC-MS/MS analytical method for multiresidue determination of 26 different pesticides in pollen was developed and validated in accordance with the recommendations of the European Union SANCO guide. Environmental monitoring was conducted using the analysis of 145 pollen samples collected from ten beehives in the experimental apiary of Embrapa in Jaguariúna (São Paulo State, Brazil). Bioallethrin and pendimethalin were identified in four and eighteen samples, respectively, at concentrations below the LOQ of the method (25 ng g(-1)). Passive sampling with polyurethane foam discs was used as a control, and no pesticides were found. The detection of pesticide residues in seven samples (33%) from commercial apiaries in Ribeirão Preto (São Paulo State) confirmed the efficiency of the analytical method and the need for environmental monitoring for the presence of pesticide residues. The results demonstrated the potential of bee pollen as a bioindicator of environmental contamination by pesticides. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nonlinear fractional order proportion-integral-derivative active disturbance rejection control method design for hypersonic vehicle attitude control

NASA Astrophysics Data System (ADS)

Song, Jia; Wang, Lun; Cai, Guobiao; Qi, Xiaoqiang

2015-06-01

Near space hypersonic vehicle model is nonlinear, multivariable and couples in the reentry process, which are challenging for the controller design. In this paper, a nonlinear fractional order proportion integral derivative (NFOPIλDμ) active disturbance rejection control (ADRC) strategy based on a natural selection particle swarm (NSPSO) algorithm is proposed for the hypersonic vehicle flight control. The NFOPIλDμ ADRC method consists of a tracking-differentiator (TD), an NFOPIλDμ controller and an extended state observer (ESO). The NFOPIλDμ controller designed by combining an FOPIλDμ method and a nonlinear states error feedback control law (NLSEF) is to overcome concussion caused by the NLSEF and conversely compensate the insufficiency for relatively simple and rough signal processing caused by the FOPIλDμ method. The TD is applied to coordinate the contradiction between rapidity and overshoot. By attributing all uncertain factors to unknown disturbances, the ESO can achieve dynamic feedback compensation for these disturbances and thus reduce their effects. Simulation results show that the NFOPIλDμ ADRC method can make the hypersonic vehicle six-degree-of-freedom nonlinear model track desired nominal signals accurately and fast, has good stability, dynamic properties and strong robustness against external environmental disturbances.

Final Environmental Impact Statement for Langley

NASA Technical Reports Server (NTRS)

1971-01-01

The Langley Research Center is described, together with the nature of its activities, from which it can be seen that the Center is basically not a major pollution source. Geographical, geological, and climatic charateristics of the site are also described. inasmuch as they influence both the choice of disposal methods and the environmental effects of the pollutants. The known or probable pollution sources at the Center are described. Where the intensities of these sources might exceed the recommended guide-lines, the corrective actions that have been taken or are being taken are described. The entire inventory of pollution sources and control methods is summarized in an appendix.

[Sampling methods for PM2.5 from stationary sources: a review].

PubMed

Jiang, Jing-Kun; Deng, Jian-Guo; Li, Zhen; Li, Xing-Hua; Duan, Lei; Hao, Ji-Ming

2014-05-01

The new China national ambient air quality standard has been published in 2012 and will be implemented in 2016. To meet the requirements in this new standard, monitoring and controlling PM2,,5 emission from stationary sources are very important. However, so far there is no national standard method on sampling PM2.5 from stationary sources. Different sampling methods for PM2.5 from stationary sources and relevant international standards were reviewed in this study. It includes the methods for PM2.5 sampling in flue gas and the methods for PM2.5 sampling after dilution. Both advantages and disadvantages of these sampling methods were discussed. For environmental management, the method for PM2.5 sampling in flue gas such as impactor and virtual impactor was suggested as a standard to determine filterable PM2.5. To evaluate environmental and health effects of PM2.5 from stationary sources, standard dilution method for sampling of total PM2.5 should be established.

Benefit Analysis Using Indirect or Imputed Market Methods. Volumes I-III, (1985-1994)

EPA Pesticide Factsheets

A series of reports were prepared under a grant awarded to the University of Maryland-College Park for the U.S. Environmental Protection Agency focusing on estimating the benefits of water pollution control.

Teaching Culture within the Nursing Curriculum Using the Giger-Davidhizar Model of Transcultural Nursing Assessment.

ERIC Educational Resources Information Center

Davidhizar, Ruth; Giger, Joyce Newman

2001-01-01

Presents a method for integrating cultural competence throughout the nursing curriculum. The model contains six cultural phenomena: communication, space, social organization, time, environmental control, and biological variation. Contains 17 references. (SK)

40 CFR 721.6090 - Phosphoramide.

Code of Federal Regulations, 2010 CFR

2010-07-01

....6090 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT...) Hazard communication program. A significant new use of this substance is any manner or method of manufacture, import, or processing associated with any use of this substance without providing risk...

Modeling a Hydrologically Optimal Green Roof Media Mixture

EPA Science Inventory

Background/Questions/MethodsA key environmental concern in managing urban ecosystems is controlling stormwater runoff to ameliorate pollution problems and sewage overflows. Vegetated green roofs have become an important green infrastructure tool to collect, store, and gradually r...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2014 CFR

2014-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2012 CFR

2012-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2011 CFR

2011-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2010 CFR

2010-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2013 CFR

2013-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

Real Time Quality Control Methods for Cued EMI Data Collection

DTIC Science & Technology

2016-03-14

contents be construed as reflecting the official policy or position of the Department of Defense. Reference herein to any specific commercial product...This project evaluated the effectiveness of in-field quality control (QC) procedures during cued electromagnetic induction (EMI) data collection. The...electromagnetic induction ESTCP Environmental Security Technology Certification Program hr hour ISO Industry Standard Object IVS Instrument

[Regional atmospheric environment risk source identification and assessment].

PubMed

Zhang, Xiao-Chun; Chen, Wei-Ping; Ma, Chun; Zhan, Shui-Fen; Jiao, Wen-Tao

2012-12-01

Identification and assessment for atmospheric environment risk source plays an important role in regional atmospheric risk assessment and regional atmospheric pollution prevention and control. The likelihood exposure and consequence assessment method (LEC method) and the Delphi method were employed to build a fast and effective method for identification and assessment of regional atmospheric environment risk sources. This method was applied to the case study of a large coal transportation port in North China. The assessment results showed that the risk characteristics and the harm degree of regional atmospheric environment risk source were in line with the actual situation. Fast and effective identification and assessment of risk source has laid an important foundation for the regional atmospheric environmental risk assessment and regional atmospheric pollution prevention and control.

Preparedness for emerging infectious diseases: pathways from anticipation to action.

PubMed

Brookes, V J; Hernández-Jover, M; Black, P F; Ward, M P

2015-07-01

Emerging and re-emerging infectious disease (EID) events can have devastating human, animal and environmental health impacts. The emergence of EIDs has been associated with interconnected economic, social and environmental changes. Understanding these changes is crucial for EID preparedness and subsequent prevention and control of EID events. The aim of this review is to describe tools currently available for identification, prioritization and investigation of EIDs impacting human and animal health, and how these might be integrated into a systematic approach for directing EID preparedness. Environmental scanning, foresight programmes, horizon scanning and surveillance are used to collect and assess information for rapidly responding to EIDs and to anticipate drivers of emergence for mitigating future EID impacts. Prioritization of EIDs - using transparent and repeatable methods - based on disease impacts and the importance of those impacts to decision-makers can then be used for more efficient resource allocation for prevention and control. Risk assessment and simulation modelling methods assess the likelihood of EIDs occurring, define impact and identify mitigation strategies. Each of these tools has a role to play individually; however, we propose integration of these tools into a framework that enhances the development of tactical and strategic plans for emerging risk preparedness.

REAL-TIME MONITORING OF DIOXINS AND OTHER ...

EPA Pesticide Factsheets

This project is part of EPA's EMPACT program which was begun in 1998 and is jointly administered by EPA's Office of Research and Development, the National Center for Environmental Research and Quality Assurance (NCERQA), and the National Center for Environmental Assessment. The program was developed to provide understandable environmental information on various research initiatives to the public in a timely manner on various issues of importance. This particular project involves development of the application of an on-line, real time, trace organic air toxic monitor, with special emphasis on dioxin-related compounds. Research efforts demonstrate the utility and usefulness of the Resonance Enhanced Multi-Photon Ionization (REMPI) analytical method for trace organics control, monitoring, and compliance assurance. Project objectives will be to develop the REMPI instrumental method into a tool that will be used for assessment of potential dioxin sources, control and prevention of dioxin formation in known sources, and communication of facility performance. This will be accomplished through instrument development, laboratory verification, thermokinetic modelling, equilibrium modelling, statistical determinations, field validation, program publication and presentation, regulatory office support, and development of data communication/presentation procedures. For additional information on this EMPACT project, visit the website at http://www.epa.gov/appcdwww/crb/empa

Review of TESS internal controls over financial management and procurement activities. [TRW Environmental Safety Syatems (TESS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-11-25

The Department of Energy's (DOE) civilian radioactive waste program is responsible for the safe disposal of highly radioactive nuclear waste. In February 1991, TRW Environmental Safety Systems (TESS) became the Management and operating contractor for this program. The value of the TESS contract was placed at $1 billion over a 10-year period. In October 1991, we made a review of financial controls in place at TESS. This audit was limited to an evaluation of the internal controls for financial management and procurement. We found that although TESS had made progress in establishing the necessary financial management structure, more effective controlsmore » were needed in certain areas. Specifically, TESS used a method for computing business license taxes that resulted in overpayment; they put into effect a policy to reimburse employees the maximum allowable rate for lodging rather than the actual costs; they did not always obtain the most economical airfares for travel; and, they did not utilize the most effective procurement methods. The Headquarters Procurement Office agreed with our findings and developed an action plan which addresses our recommendations.« less

Control Technology for Depainting Operations: Estimation of Life-Cycle Costs of Controlling Methylene Chloride in Aircraft-Depainting Operations Versus Alternative Processes

DTIC Science & Technology

1997-11-24

2343 Calle Del Mundo Santa Clara, CA 95054-1008 Tel.: (408)727-8282 POC: J. A. Gotterba Durr Industries Environmental Systems Division 40600...1) LESS THAN 1 IV. FIRE AND EXPLOSION DATA FLASH POINT (TEST METHOD) ABOVE 200*P AUTO IGNITION ABOVE TEMPERATURE iJfJO’P...IST METHOD, ?oo.._r T,CCT CxriNOUISHINO Mt 01A WATER AUTO IGNITION ABOVB I rLAM**BLt »•’•’"’• TEMPERATURE ^QQly | IN AIR

Environmental Sustainability Analysis and Nutritional Strategies of Animal Production in China.

PubMed

Tan, Bie; Yin, Yulong

2017-02-08

Animal production in China has achieved considerable progress and contributes to 46% of the total agriculture output value of the country. However, this fast expansion of animal production has led to environmental pollution. In this article, we review the status of soil, water, and air pollution associated with animal production in China and analyze the main sources of the pollutants. The government has promulgated regulations and standards, and effective models and technologies have been developed to control pollution during the last 10 years. Because nutrition and feed strategies represent the most effective method of controlling environmental pollution at the source, this review focuses on nutritional technologies, including accurate feed formulation, rational use of additives, and proper processing of feeds. The advances of modern biotechnology and big data systems also provide more modern approaches to decreasing wastage release. These nutritional strategies are expected to promote sustainable development of animal production.

Environmental controls on denitrifying communities and denitrification rates--Insights from molecular methods

USGS Publications Warehouse

Wallenstein, Matthew D.; Myrold, David D.; Firestone, Mary; Voytek, Mary

2006-01-01

The advent of molecular techniques has improved our understanding of the microbial communities responsible for denitrification and is beginning to address their role in controlling denitrification processes. There is a large diversity of bacteria, archaea, and fungi capable of denitrification, and their community composition is structured by long-term environmental drivers. The range of temperature and moisture conditions, substrate availability, competition, and disturbances have long-lasting legacies on denitrifier community structure. These communities may differ in physiology, environmental tolerances to pH and O2, growth rate, and enzyme kinetics. Although factors such as O2, pH, C availability, and NO3− pools affect instantaneous rates, these drivers act through the biotic community. This review summarizes the results of molecular investigations of denitrifier communities in natural environments and provides a framework for developing future research for addressing connections between denitrifier community structure and function.

First-Year Results of an Obesity Prevention Program at The Dow Chemical Company

PubMed Central

Goetzel, Ron Z.; Baker, Kristin M.; Short, Meghan E.; Pei, Xiaofei; Ozminkowski, Ronald J.; Wang, Shaohung; Bowen, Jennie D.; Roemer, Enid C.; Craun, Beth A.; Tully, Karen J.; Baase, Catherine M.

2010-01-01

Objective To examine first-year results from a workplace environmental obesity prevention program at The Dow Chemical Company. Methods A quasi-experimental cohort study was conducted among employees at nine treatment worksites (n=8,013) who received environmental weight management interventions and three control worksites (n=2,269). Changes in employees’ weight, body mass index (BMI), and other health risks were examined using chi-square and t-tests. Results After one year, a modest treatment effect was observed for weight and BMI largely because the control group subjects gained weight; however, no effect was observed for overweight and obesity prevalence. Other risk factors (tobacco use, high blood pressure, and systolic and diastolic blood pressure values) decreased significantly, although blood glucose (high risk prevalence and values) increased. Conclusions Environmental changes to the workplace can achieve modest improvements in employees’ health risks, including weight and BMI measures, in one year. PMID:19209033

Environmental Viral Metagenomics Analyses in Aquaculture: Applications in Epidemiology and Disease Control

PubMed Central

Munang’andu, Hetron M.

2016-01-01

Studies on the epidemiology of viral diseases in aquaculture have for a long time depended on isolation of viruses from infected aquatic organisms. The role of aquatic environments in the epidemiology of viral diseases in aquaculture has not been extensively expounded mainly because of the lack of appropriate tools for environmental studies on aquatic viruses. However, the upcoming of metagenomics analyses opens great avenues in which environmental samples can be used to study the epidemiology of viral diseases outside their host species. Hence, in this review I have shown that epidemiological factors that influence the composition of viruses in different aquatic environments include ecological factors, anthropogenic activities and stocking densities of cultured organisms based on environmental metagenomics studies carried out this far. Ballast water transportation and global trade of aquatic organisms are the most common virus dispersal process identified this far. In terms of disease control for outdoor aquaculture systems, baseline data on viruses found in different environments intended for aquaculture use can be obtained to enable the design of effective disease control strategies. And as such, high-risk areas having a high specter of pathogenic viruses can be identified as an early warning system. As for the control of viral diseases for indoor recirculation aquaculture systems (RAS), the most effective disinfection methods able to eliminate pathogenic viruses from water used in RAS can be identified. Overall, the synopsis I have put forth in this review shows that environmental samples can be used to study the epidemiology of viral diseases in aquaculture using viral metagenomics analysis as an overture for the design of rational disease control strategies. PMID:28018317

Effectiveness of qPCR permutations, internal controls and dilution as means for minimizing the impact of inhibition while measuring Enterococcus in environmental waters.

PubMed

Cao, Y; Griffith, J F; Dorevitch, S; Weisberg, S B

2012-07-01

  Draft criteria for the optional use of qPCR for recreational water quality monitoring have been published in the United States. One concern is that inhibition of the qPCR assay can lead to false-negative results and potentially inadequate public health protection. We evaluate the effectiveness of strategies for minimizing the impact of inhibition.   Five qPCR method permutations for measuring Enterococcus were challenged with 133 potentially inhibitory fresh and marine water samples. Serial dilutions were conducted to assess Enterococcus target assay inhibition, to which inhibition identified using four internal controls (IC) was compared. The frequency and magnitude of inhibition varied considerably among qPCR methods, with the permutation using an environmental master mix performing substantially better. Fivefold dilution was also effective at reducing inhibition in most samples (>78%). ICs were variable and somewhat ineffective, with 54-85% agreement between ICs and serial dilution.   The current IC methods appear to not accurately predict Enterococcus inhibition and should be used with caution; fivefold dilution and the use of reagents designed for environmental sample analysis (i.e. more robust qPCR chemistry) may be preferable.   Suitable approaches for defining, detecting and reducing inhibition will improve implementation of qPCR for water monitoring. © 2012 The Authors. Journal of Applied Microbiology © 2012 The Society for Applied Microbiology.

40 CFR 721.1750 - 1H-Benzotriazole, 5-(pen-tyl-oxy)- and 1H-ben-zo-tri-a-zole, 5-(pen-tyl-oxy)-, sodium and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... this new information, and any information on methods for protecting against such risk, into a MSDS as... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... these substances is any manner or method of manufacture, import, or processing associated with any use...

NHEXAS PHASE I REGION 5 STUDY--STANDARD OPERATING PROCEDURE--COMPENDIUM OF METHOD SUMMARIES FOR COLLECTION AND ANALYSIS OF METALS AND VOCS IN BLOOD AND URINE (CDC-COMPENDIUM)

EPA Science Inventory

This compendium includes method summaries provided by the Centers for Disease Control and Prevention/National Center for Environmental Health (CDC/NCEH) for collection and shipping of blood and urine samples for analysis of metals and volatile organic compounds (VOCs). It provide...

NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE--COMPENDIUM OF METHOD SUMMARIES FOR COLLECTION AND ANALYSIS OF METALS, PESTICIDE METABOLITES, AND VOCS IN BLOOD AND URINE (CDC-COMPENDIUM)

EPA Science Inventory

This compendium includes method summaries provided by the Centers for Disease Control and Prevention/National Center for Environmental Health (CDC/NCEH) for the collection and shipping of blood and urine samples for analysis of metals and volatile organic compounds (VOCs). It pro...

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE--COMPENDIUM OF METHOD SUMMARIES FOR COLLECTION AND ANALYSIS OF METALS, PESTICIDE METABOLITES, AND VOC IN BLOOD AND URINE (CDC-COMPENDIUM)

EPA Science Inventory

This compendium includes method summaries provided by the Centers for Disease Control and Prevention/National Center for Environmental Health (CDC/NCEH) for the collection and shipping of blood and urine samples for analysis of metals and volatile organic compounds (VOCs). It pro...

Cost effective malaria risk control using remote sensing and environmental data

NASA Astrophysics Data System (ADS)

Rahman, Md. Z.; Roytman, Leonid; Kadik, Abdel Hamid

2012-06-01

Malaria transmission in many part of the world specifically in Bangladesh and southern African countries is unstable and epidemic. An estimate of over a million cases is reported annually. Malaria is heterogeneous, potentially due to variations in ecological settings, socio-economic status, land cover, and agricultural practices. Malaria control only relies on treatment and supply of bed networks. Drug resistance to these diseases is widespread. Vector control is minimal. Malaria control in those countries faces many formidable challenges such as inadequate accessibility to effective treatment, lack of trained manpower, inaccessibility of endemic areas, poverty, lack of education, poor health infrastructure and low health budgets. Health facilities for malaria management are limited, surveillance is inadequate, and vector control is insufficient. Control can only be successful if the right methods are used at the right time in the right place. This paper aims to improve malaria control by developing malaria risk maps and risk models using satellite remote sensing data by identifying, assessing, and mapping determinants of malaria associated with environmental, socio-economic, malaria control, and agricultural factors.

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... three methods developed by the National Institute for Occupational Safety and Health (NIOSH), which are...

Applicator Training Manual for: Forest Pest Control.

ERIC Educational Resources Information Center

Newman, Jim

Described in this manual is the use of insecticides, fungicides, and herbicides in forestry. Both diseases and insects found in hardwoods and conifers are covered. Detailed information is given on methods of herbicide application. Finally, five important environmental considerations are given. (BB)

Cost Effectiveness Of Selected Roadway Dust Control Methods For Eagle River, Alaska

DOT National Transportation Integrated Search

1988-01-01

The U.S. Environmental Protection Agency has set air quality standards for airborne particulates with diameters equal to or less than ten microns (PM10 particulates). These particulates have been correlated with respiratory illnesses. The primary sta...

40 CFR 766.12 - Testing guidelines.

Code of Federal Regulations, 2010 CFR

2010-07-01

....12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... must be developed using methods equivalent to those described or reviewed in Guidelines for the... this part (Docket No. OPPTS-83002) and are available for inspection in the Non-Confidential Information...

40 CFR 766.12 - Testing guidelines.

Code of Federal Regulations, 2012 CFR

2012-07-01

....12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... must be developed using methods equivalent to those described or reviewed in Guidelines for the... this part (Docket No. OPPTS-83002) and are available for inspection in the Non-Confidential Information...

40 CFR 766.12 - Testing guidelines.

Code of Federal Regulations, 2011 CFR

2011-07-01

....12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... must be developed using methods equivalent to those described or reviewed in Guidelines for the... this part (Docket No. OPPTS-83002) and are available for inspection in the Non-Confidential Information...

Environmental Control Of A Genetic Process

NASA Technical Reports Server (NTRS)

Khosla, Chaitan; Bailey, James E.

1991-01-01

E. coli bacteria altered to contain DNA sequence encoding production of hemoglobin made to produce hemoglobin at rates decreasing with increases in concentration of oxygen in culture media. Represents amplification of part of method described in "Cloned Hemoglobin Genes Enhance Growth Of Cells" (NPO-17517). Manipulation of promoter/regulator DNA sequences opens promising new subfield of recombinant-DNA technology for environmental control of expression of selected DNA sequences. New recombinant-DNA fusion gene products, expression vectors, and nucleotide-base sequences will emerge. Likely applications include such aerobic processes as manufacture of cloned proteins and synthesis of metabolites, production of chemicals by fermentation, enzymatic degradation, treatment of wastes, brewing, and variety of oxidative chemical reactions.

Consensus statement: patient safety, healthcare-associated infections and hospital environmental surfaces.

PubMed

Roques, Christine; Al Mousa, Haifaa; Duse, Adriano; Gallagher, Rose; Koburger, Torsten; Lingaas, Egil; Petrosillo, Nicola; Škrlin, Jasenka

2015-01-01

Healthcare-associated infections have serious implications for both patients and hospitals. Environmental surface contamination is the key to transmission of nosocomial pathogens. Routine manual cleaning and disinfection eliminates visible soil and reduces environmental bioburden and risk of transmission, but may not address some surface contamination. Automated area decontamination technologies achieve more consistent and pervasive disinfection than manual methods, but it is challenging to demonstrate their efficacy within a randomized trial of the multiple interventions required to reduce healthcare-associated infection rates. Until data from multicenter observational studies are available, automated area decontamination technologies should be an adjunct to manual cleaning and disinfection within a total, multi-layered system and risk-based approach designed to control environmental pathogens and promote patient safety.

A Manual of Mosquito Control Projects and Committee Assignments for 4-H and Scouts Biology Class Projects, Organized Community Service Programs, and Individuals Interested in Environmental Management.

ERIC Educational Resources Information Center

Hart, Richard A.

The mosquito control projects presented in this manual were prepared from an educational viewpoint and are intended for use by students in 4-H and Scouts and as a supplement to high school and college biology course work. The major emphasis of the projects is on integrated pest management, an approach utilizing cost-effective control methods which…

Confounding environmental colour and distribution shape leads to underestimation of population extinction risk.

PubMed

Fowler, Mike S; Ruokolainen, Lasse

2013-01-01

The colour of environmental variability influences the size of population fluctuations when filtered through density dependent dynamics, driving extinction risk through dynamical resonance. Slow fluctuations (low frequencies) dominate in red environments, rapid fluctuations (high frequencies) in blue environments and white environments are purely random (no frequencies dominate). Two methods are commonly employed to generate the coloured spatial and/or temporal stochastic (environmental) series used in combination with population (dynamical feedback) models: autoregressive [AR(1)] and sinusoidal (1/f) models. We show that changing environmental colour from white to red with 1/f models, and from white to red or blue with AR(1) models, generates coloured environmental series that are not normally distributed at finite time-scales, potentially confounding comparison with normally distributed white noise models. Increasing variability of sample Skewness and Kurtosis and decreasing mean Kurtosis of these series alter the frequency distribution shape of the realised values of the coloured stochastic processes. These changes in distribution shape alter patterns in the probability of single and series of extreme conditions. We show that the reduced extinction risk for undercompensating (slow growing) populations in red environments previously predicted with traditional 1/f methods is an artefact of changes in the distribution shapes of the environmental series. This is demonstrated by comparison with coloured series controlled to be normally distributed using spectral mimicry. Changes in the distribution shape that arise using traditional methods lead to underestimation of extinction risk in normally distributed, red 1/f environments. AR(1) methods also underestimate extinction risks in traditionally generated red environments. This work synthesises previous results and provides further insight into the processes driving extinction risk in model populations. We must let the characteristics of known natural environmental covariates (e.g., colour and distribution shape) guide us in our choice of how to best model the impact of coloured environmental variation on population dynamics.

Cadmium, Chromium, and Copper Concentration plus Semen-Quality in Environmental Pollution Site, China

PubMed Central

LI, Yan; GAO, Qiaoyan; LI, Mingcai; LI, Mengyang; GAO, Xueming

2014-01-01

Abstract Background The environmental pollution is one of the factors contributing to the decrease of sperm quality for human beings. The aim of this study was to assess cadmium (Cd), chromium (Cr), and copper (Cu) concentration of man in environmental pollution site, and explore relationships between men exposure to Cd, Cr, and Cu and semen-quality parameters in environmental pollution site. Methods Ninety five men were recruited through pollution area and controls in 2011. We measured semen quality using Computer-aided Semen Quality Analysis, and Cd, Cr, and Cu levels in seminal plasma using Graphite Gurnace Atomic Absorption Spectroscopy. Spearman rank correlation analysis was used to evaluate the correlation between Cd, Cr and Cu concentration in seminal plasma and semen quality. Results The mean of seminal plasma Cd, Cr, and Cu values in pollution area was higher than the controls. Seminal plasma Cr values displayed a significant negative correlation with total motility and normomorph sperm rate. Seminal plasma Cu values also displayed a negative correlation with normomorph sperm rate. Conclusions Male reproductive health may be threatened by environmental pollution, and it may be influence local population diathesis. PMID:26060677

Screening of pollution control and clean-up materials for river chemical spills using the multiple case-based reasoning method with a difference-driven revision strategy.

PubMed

Liu, Rentao; Jiang, Jiping; Guo, Liang; Shi, Bin; Liu, Jie; Du, Zhaolin; Wang, Peng

2016-06-01

In-depth filtering of emergency disposal technology (EDT) and materials has been required in the process of environmental pollution emergency disposal. However, an urgent problem that must be solved is how to quickly and accurately select the most appropriate materials for treating a pollution event from the existing spill control and clean-up materials (SCCM). To meet this need, the following objectives were addressed in this study. First, the material base and a case base for environment pollution emergency disposal were established to build a foundation and provide material for SCCM screening. Second, the multiple case-based reasoning model method with a difference-driven revision strategy (DDRS-MCBR) was applied to improve the original dual case-based reasoning model method system, and screening and decision-making was performed for SCCM using this model. Third, an actual environmental pollution accident from 2012 was used as a case study to verify the material base, case base, and screening model. The results demonstrated that the DDRS-MCBR method was fast, efficient, and practical. The DDRS-MCBR method changes the passive situation in which the choice of SCCM screening depends only on the subjective experience of the decision maker and offers a new approach to screening SCCM.

Measurement of Phenolic Environmental Estrogens in Women with Uterine Leiomyoma

PubMed Central

Shen, Yang; Xu, Qian; Ren, Mulan; Feng, Xu; Cai, Yunlang; Gao, Yongxing

2013-01-01

Objectives To investigate the effect of phenolic environmental estrogens on uterine leiomyoma from the perspective of clinical epidemiology. Methods Urine and blood samples were collected from Han women with uterine leiomyoma and women without uterine leiomyoma, living in Nanjing, China, between September 2011 and February 2013. A total of 156 urine samples and 214 blood samples were collected from the uterine leiomyoma group and 106 urine samples and 126 blood plasma samples from the control group. Bisphenol A (BPA), nonylphenol (NP) and octylphenol (OP) concentrations were determined by solid-phase extraction (SPE) coupled with liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). Results Phenolic environmental estrogens in the uterine leiomyoma and control groups were compared based on: gravida>3 and gravida ≤ 3. In participants with gravida>3, urine OP concentration was significantly (P<0.05) higher in the uterine leiomyoma group than in the control group. In participants with gravida ≤ 3, urine NP concentration was significantly (P<0.05) higher in the uterine leiomyoma group compared to controls. Despite obstetric history, urine BPA mean exposure concentration was significantly (P<0.05) different between uterine leiomyoma group and control group. The urine BPA concentration was not significantly (P>0.05) different between gravida>3 and gravida ≤ 3 patients. There was no significant (P>0.05) difference in plasma concentrations of BPA, OP and NP between the leiomyoma group and control group. Mean exposure concentration and range of distribution of BPA, OP and NP plasma concentration differed between the uterine leiomyoma and control group. Conclusion Exposure level of phenolic environmental estrogens in human was related with leiomyoma tumorigenesis. PMID:24255718

The advances of Chinese non-ferrous metal mineral industry and its environmental management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miao Zewei; Gao Lin; Zhou Xiaoyuan

1998-12-31

With the steady growth of Chinese economy, the nonferrous metal industry of China was also developed quickly. The gross output of ten main nonferrous metals 4.25 million tons in 1995 so that China ranks the fourth in the world. However, a series of environmental problems also occurred, which relate to characteristics of mineral resources, techniques for mining, dressing, smelting and processing, equipment and their management level. The major pollutants include sulphur dioxide, industrial powder-dust and smoke-dust, water containing heavy metal ions as well as solid wastes. Air, water body, soil, vegetation and people`s health were polluted and damaged to differentmore » extent due to the above pollutants. For the purpose of environmental management and pollution control, some measures must be taken: (1) to strengthen environmental planning, accelerate and perfect environmental laws and related regulations as well as spread the consciousness of environmental protection energetically; (2) to extend cleaner production and adopt advanced technologies so as to reduce environmental pollution; (3) to turn the concept of the end-of-pipe management to the whole-process control; (4) to recovery or reuse the wastes fully. In addition, general situation and policies on reclamation of mining land as well as theory, methods and techniques of restoration of waste land were also stated in the paper.« less

Crisis in environmental management of the Soviet Union

NASA Astrophysics Data System (ADS)

Khabibullov, Marat

1991-11-01

The prevailing system of environmental management strongly depends on the economic and political structures of a country and is influenced by the current condition of them. Environmental degradation in the Soviet Union has been caused mainly by the political and economic misconceptions listed in this article. With the transformation of its state order to the model of Western democracies, the Soviet Union is experiencing a deep economic crisis of restructuring, reflected in a parallel crisis in its system of environmental management, which is manifest in the form of rapid transformation. This is characterized by the contradiction of the state’s old administrative institutions, which still exist, with the efforts to use market mechanisms of environmental control. Such methods include various fees and payments for the use of natural resources or for pollution and creation of specialized regional funds and banks to finance environmental programs. All these occur in the context of the strengthening of regional sovereignty, the introduction of self-accounting for economic units, the adoption of comprehensive legal enactments, and the setting up of an efficient administrative system of their enforcement. Public activism, as one of the principal actors in this structure, also has undergone quick maturation. Nevertheless the future development of the new Soviet system of environmental control remains uncertain because of the present unpredictability of the overall situation in the short run.

Methodology for National Water Savings Model and Spreadsheet Tool—Outdoor Water Use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Alison, A; Chen, Yuting; Dunham, Camilla

This report describes the method Lawrence Berkeley National Laboratory (LBNL) developed to estimate national impacts of the U.S. Environmental Protection Agency’s (EPA’s) WaterSense labeling program for weather-based irrigation controllers (WBIC). Estimated impacts include the national water savings attributable to the program and the net present value of the lifetime water savings for consumers of irrigation controllers.

The Shock and Vibration Digest, Volume 12, Number 9,

DTIC Science & Technology

1980-09-01

include diesel engine noise, process plant noise, and environ- dynamic mechanical properties of viscoelastic mate- mental noise and planning. rials...new numerical methods are presented in- plant noise control, design of facilities for noise in the twelve articles of the mathematics section. control...International Symposium for Innovative the seminar: 31 16 = ,,-,==. ’d-m w .’ " Dynamic Testing of Nuclear Power Plant Struc- ENVIRONMENTAL STRESS

Effects of sevin-4-oil, dimilin, and orthene on forest birds in northeastern Oregon

Treesearch

Merle L. Richmond; Charles J. Henny; Randy L. Floyd; William R. Mannan; Deborah M. Finch; Lawrence R. DeWeese

1979-01-01

The possible harmful effect of insecticides on nontarget organisms should be a prominent concern in all attempts to control forest pests. Although all wildlife must be considered, birds are particularly vulnerable. The study reported here was part of the effort to find an environmentally safe method to control one of the major sources of insect damage to forest trees...

Inquiry-Based Integrated Science Education: Implementation of Local Content “Soil Washing” Project To Improve Junior High School Students’ Environmental Literacy

NASA Astrophysics Data System (ADS)

Syifahayu

2017-02-01

The study was conducted based on teaching and learning problems led by conventional method that had been done in the process of learning science. It gave students lack opportunities to develop their competence and thinking skills. Consequently, the process of learning science was neglected. Students did not have opportunity to improve their critical attitude and creative thinking skills. To cope this problem, the study was conducted using Project-Based Learning model through inquiry-based science education about environment. The study also used an approach called Sains Lingkungan and Teknologi masyarakat - “Saling Temas” (Environmental science and Technology in Society) which promoted the local content in Lampung as a theme in integrated science teaching and learning. The study was a quasi-experimental with pretest-posttest control group design. Initially, the subjects were given a pre-test. The experimental group was given inquiry learning method while the control group was given conventional learning. After the learning process, the subjects of both groups were given post-test. Quantitative analysis was performed using the Mann-Whitney U-test and also a qualitative descriptive. Based on the result, environmental literacy skills of students who get inquiry learning strategy, with project-based learning model on the theme soil washing, showed significant differences. The experimental group is better than the control group. Data analysis showed the p-value or sig. (2-tailed) is 0.000 <α = 0.05 with the average N-gain of experimental group is 34.72 and control group is 16.40. Besides, the learning process becomes more meaningful.

The metrological assurance of quality petroleum products. Methods for determining octane and sulfur numbers in the petroleum products

NASA Astrophysics Data System (ADS)

Shalkov, A. V.; Fadeev, Y. A.

2018-01-01

At present, solving environmental problems in industrially developed regions with a large concentration of mining and machine building enterprises is one of the main socially important tasks. Taking into account the increase in the volume of mining, there is an increase in the environmental burden, which affects the internal migration of the population. This is particularly evident in the examples of single-industry towns, in which a gradual decrease in the young workable population occurs. The article presents an analysis of the sources of maximum pollution of the environment by coal mining enterprises. Modern methods of controlling automobile fuel were analyzed. The analysis of fuel quality and the environmental assessment of combustion products was carried out. The equipment used in the article makes it possible to exclude substandard fuel and to reduce harmful emissions of vehicles to the atmosphere.

Highway Repair: A New Silicosis Threat

PubMed Central

Valiante, David J.; Schill, Donald P.; Rosenman, Kenneth D.; Socie, Edward

2004-01-01

Objectives. We describe an emerging public health concern regarding silicosis in the fast-growing highway repair industry. Methods. We examined highway construction trends, silicosis surveillance case data, and environmental exposure data to evaluate the risk of silicosis among highway repair workers. We reviewed silicosis case data from the construction industry in 3 states that have silicosis registries, and we conducted environmental monitoring for silica at highway repair work sites. Results. Our findings indicate that a large population of highway workers is at risk of developing silicosis from exposure to crystalline silica. Conclusions. Exposure control methods, medical screenings, protective health standards, and safety-related contract language are necessary for preventing future occupational disease problems among highway repair workers. PMID:15117715

Principles and problems of environmental pollution of groundwater resources with case examples from developing countries.

PubMed Central

Egboka, B C; Nwankwor, G I; Orajaka, I P; Ejiofor, A O

1989-01-01

The principles and problems of environmental pollution and contamination are outlined. Emphasis is given to case examples from developing countries of Africa, Asia, and Latin America with a comparative analysis to developed countries. The problems of pollution/contamination are widespread in developed countries but are gradually spreading from the urban to rural areas in the developing countries. Great efforts in research and control programs to check pollution-loading into the environment have been made in the industrialized countries, but only negligible actions have been taken in developing countries. Pollutants emanate from both point and distributed sources and have adversely affected both surface water and groundwaters. The influences of the geologic and hydrologic cycles that exacerbate the incidences of pollution/contamination have not been well understood by environmental planners and managers. Professionals in the different areas of pollution control projects, particularly in developing countries, lack the integrated multiobjective approaches and techniques in problem solving. Such countries as Nigeria, Kenya, Brazil, and India are now menaced by pollution hazards. Appropriate methods of control are hereby suggested. PMID:2695325

Study on the total amount control of atmospheric pollutant based on GIS.

PubMed

Wang, Jian-Ping; Guo, Xi-Kun

2005-08-01

To provide effective environmental management for total amount control of atmospheric pollutants. An atmospheric diffusion model of sulfur dioxide on the surface of the earth was established and tested in Shantou of Guangdong Province on the basis of an overall assessment of regional natural environment, social economic state of development, pollution sources and atmospheric environmental quality. Compared with actual monitoring results in a studied region, simulation values fell within the range of two times of error and were evenly distributed in the two sides of the monitored values. Predicted with the largest emission model method, the largest emission of sulfur dioxide would be 54,279.792 tons per year in 2010. The mathematical model established and revised on the basis of GIS is more rational and suitable for the regional characteristics of total amount control of air pollutants.

Leaving A Mark: A Comparison Arthropod Protein Marking Protocols

USDA-ARS?s Scientific Manuscript database

Knowledge of arthropod pest and natural enemy disperal patterns is needed for effective and environmentally benign pest control. The most common tactics used to monitor arthropod dispersal patterns include mark-release-recapture (MRR) and mark-capture methodologies. Both methods require the applica...

40 CFR 761.260 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... Site Characterization Sampling for PCB Remediation Waste in Accordance with § 761.61(a)(2) § 761.260 Applicability. This subpart provides a method for collecting new data for characterizing a PCB remediation waste...

40 CFR 761.260 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... Site Characterization Sampling for PCB Remediation Waste in Accordance with § 761.61(a)(2) § 761.260 Applicability. This subpart provides a method for collecting new data for characterizing a PCB remediation waste...

40 CFR 761.260 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... Site Characterization Sampling for PCB Remediation Waste in Accordance with § 761.61(a)(2) § 761.260 Applicability. This subpart provides a method for collecting new data for characterizing a PCB remediation waste...

40 CFR 761.260 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... Site Characterization Sampling for PCB Remediation Waste in Accordance with § 761.61(a)(2) § 761.260 Applicability. This subpart provides a method for collecting new data for characterizing a PCB remediation waste...

Children’s Health in Latin America: The Influence of Environmental Exposures

PubMed Central

Laborde, Amalia; Tomasina, Fernando; Bianchi, Fabrizio; Bruné, Marie-Noel; Buka, Irena; Comba, Pietro; Corra, Lilian; Cori, Liliana; Duffert, Christin Maria; Harari, Raul; Iavarone, Ivano; McDiarmid, Melissa A.; Gray, Kimberly A.; Sly, Peter D.; Soares, Agnes; Suk, William A.

2014-01-01

Background Chronic diseases are increasing among children in Latin America. Objective and Methods To examine environmental risk factors for chronic disease in Latin American children and to develop a strategic initiative for control of these exposures, the World Health Organization (WHO) including the Pan American Health Organization (PAHO), the Collegium Ramazzini, and Latin American scientists reviewed regional and relevant global data. Results Industrial development and urbanization are proceeding rapidly in Latin America, and environmental pollution has become widespread. Environmental threats to children’s health include traditional hazards such as indoor air pollution and drinking-water contamination; the newer hazards of urban air pollution; toxic chemicals such as lead, asbestos, mercury, arsenic, and pesticides; hazardous and electronic waste; and climate change. The mix of traditional and modern hazards varies greatly across and within countries reflecting industrialization, urbanization, and socioeconomic forces. Conclusions To control environmental threats to children’s health in Latin America, WHO, including PAHO, will focus on the most highly prevalent and serious hazards—indoor and outdoor air pollution, water pollution, and toxic chemicals. Strategies for controlling these hazards include developing tracking data on regional trends in children’s environmental health (CEH), building a network of Collaborating Centres, promoting biomedical research in CEH, building regional capacity, supporting development of evidence-based prevention policies, studying the economic costs of chronic diseases in children, and developing platforms for dialogue with relevant stakeholders. Citation Laborde A, Tomasina F, Bianchi F, Bruné MN, Buka I, Comba P, Corra L, Cori L, Duffert CM, Harari R, Iavarone I, McDiarmid MA, Gray KA, Sly PD, Soares A, Suk WA, Landrigan PJ. 2015. Children’s health in Latin America: the influence of environmental exposures. Environ Health Perspect 123:201–209; http://dx.doi.org/10.1289/ehp.1408292 PMID:25499717

How well have China's recent five-year plans been implemented for energy conservation and air pollution control?

PubMed

Mao, XianQiang; Zhou, Ji; Corsetti, Gabriel

2014-09-02

This study evaluates how well China's 11th and 12th Five-Year Plans have been implemented in terms of energy conservation and air pollution control and deconstructs the effects of the economic, energy, and environmental policies included in the Plans. A "counterfactual" comparative-scenario method is deployed, which assumes a business as usual scenario in which the changes in economic, energy, and environmental parameters are "frozen", and then reactivates them one by one, with the help of LEAP modeling. It is found that during the 11th Five-Year Plan period, the binding targets were basically achieved. Economic growth put a great strain upon the energy demand and the environment, but energy policy made a decisive contribution by promoting energy efficiency and structure. Environmental policy promoted the deployment of end-of-pipe treatment which led to the control of certain air pollutants but at the expense of an increase in energy use and in the emission of other pollutants. During the ongoing 12th Five-Year Plan period, energy policy's potential for efficiency improvement is shrinking, but economic policy is restraining economic growth thus making a positive contribution. Environmental policy attempts to enforce multipollutant reduction, but there is still insufficient focus on the cocontrol of different pollutants and CO2.

Assessing environmental risks for high intensity agriculture using the material flow analysis method--a case study of the Dongting Lake basin in South Central China.

PubMed

Yin, Guanyi; Liu, Liming; Yuan, Chengcheng

2015-07-01

This study primarily examined the assessment of environmental risk in high intensity agricultural areas. Dongting Lake basin was taken as a case study, which is one of the major grain producing areas in China. Using data obtained from 1989 to 2012, we applied Material Flow Analysis (MFA) to show the material consumption, pollutant output and production storage in the agricultural-environmental system and assessed the environmental risk index on the basis of the MFA results. The results predicted that the status of the environmental quality of the Dongting Lake area is unsatisfactory for the foreseeable future. The direct material input (DMI) declined by 13.9%, the domestic processed output (DPO) increased by 28.21%, the intensity of material consumption (IMC) decreased by 36.7%, the intensity of material discharge (IMD) increased by 10%, the material productivity (MP) increased by 27 times, the environmental efficiency (EE) increased by 15.31 times, and the material storage (PAS) increased by 0.23%. The DMI and DPO was higher at rural places on the edge of cities, whereas the risk of urban agriculture has arisen due to the higher increasing rate of DMI and DPO in cities compared with the counties. The composite environmental risk index increased from 0.33 to 0.96, indicating that the total environmental risk changed gradually but seriously during the 24 years assessed. The driving factors that affect environmental risk in high intensity agriculture can be divided into five classes: social, economic, human, natural and disruptive incidents. This study discussed a number of effective measures for protecting the environment while ensuring food production yields. Additional research in other areas and certain improvements of this method in future studies may be necessary to develop a more effective method of managing and controlling agricultural-environmental interactions.

Sun protection training based on a theater play for preschoolers: an effective method for imparting knowledge on sun protection?

PubMed

Seidel, Nadja; Stoelzel, Friederike; Garzarolli, Marlene; Herrmann, Sandra; Breitbart, Eckhard Wilhelm; Berth, Hendrik; Baumann, Michael; Ehninger, Gerhard

2013-09-01

Sun protection in childhood is important to reduce the risk of developing skin cancer later in life. The "Periods-of-Life-Program" for primary prevention of skin cancer introduces a combination of individual and environmental interventions for the preschool period. Within this pilot study, an intervention group received cognitive-behavioral and environmental interventions. A control group had solely received the environmental intervention, and a wait-control group received no intervention. Nursery school children (n = 80, 3 to 6 years of age) of four nursery schools were randomly assigned to these groups on school level. The ability of the cognitive-behavioral intervention (a theater play) to enhance sun protection knowledge was examined. The theater play improved knowledge over all age groups (p < .05 η(2) = .06). Age-specific analyses showed better results for children aged 5 to 6 (p < .05 η(2) = .20) compared to children aged 3 to 4 years (p = .17 η(2) = .04). In combining cognitive-behavioral and environmental interventions, the "Periods-of-Life-Program" is a promising strategy for primary prevention of skin cancer.

Bonneville Power Administration Transmission System Vegetation Management Program Draft Environmental Impact Statement

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

Bonneville is responsible for maintaining a network of 24,000 kilometers (km) or 15,000 miles (mi.) of electric transmission lines and 350 substations in a region of diverse vegetation. This vegetation can interfere with electric power flow, pose safety problems for us and the public, and interfere with our ability to maintain these facilities. We need to (1) keep vegetation away from the electric facilities; (2) increase the program efficiency and consistency; (3) review herbicide use (under increased public scrutiny); and (4) maximize the range of tools we can use while minimizing environmental impact (Integrated Vegetation Management). This DEIS establishes Planningmore » Steps for managing vegetation for specific projects (to be tiered to this EIS). In addition to No Action (current practice), alternatives are presented for Rights-of-way, Electric Yards, and Non-electric Facilities (landscaping, work yards). Four vegetation control methods are analyzed: manual, mechanical, herbicide, and biological. Also evaluated are 24 herbicide active ingredients and 4 herbicide application techniques (spot, localized, broadcast, and aerial). For rights-of-way, they consider three sets of alternatives: alternative management approaches (time-driven or establishing low-growing plant communities); alternative method packages; and, if herbicides are in a methods package, alternative vegetation selections (noxious weeds, deciduous, or any vegetation). For electric yards, one herbicide-use alternative is considered. For non-electric facilities, two method package alternatives are considered. For rights-of-way, the environmentally preferred alternative(s) would use manual, mechanical, and biological control methods, as well as spot and localized herbicide applications for noxious and deciduous plant species; the BPA-preferred alternative(s) would add broadcast and aerial herbicide applications, and would use herbicides on any vegetation. Both would factor a management approach that fosters low-growing plant communities.« less

Mapping the Regional Influence of Genetics on Brain Structure Variability - A Tensor-Based Morphometry Study

PubMed Central

Brun, Caroline; Leporé, Natasha; Pennec, Xavier; Lee, Agatha D.; Barysheva, Marina; Madsen, Sarah K.; Avedissian, Christina; Chou, Yi-Yu; de Zubicaray, Greig I.; McMahon, Katie; Wright, Margaret; Toga, Arthur W.; Thompson, Paul M.

2010-01-01

Genetic and environmental factors influence brain structure and function profoundly The search for heritable anatomical features and their influencing genes would be accelerated with detailed 3D maps showing the degree to which brain morphometry is genetically determined. As part of an MRI study that will scan 1150 twins, we applied Tensor-Based Morphometry to compute morphometric differences in 23 pairs of identical twins and 23 pairs of same-sex fraternal twins (mean age: 23.8 ± 1.8 SD years). All 92 twins’ 3D brain MRI scans were nonlinearly registered to a common space using a Riemannian fluid-based warping approach to compute volumetric differences across subjects. A multi-template method was used to improve volume quantification. Vector fields driving each subject’s anatomy onto the common template were analyzed to create maps of local volumetric excesses and deficits relative to the standard template. Using a new structural equation modeling method, we computed the voxelwise proportion of variance in volumes attributable to additive (A) or dominant (D) genetic factors versus shared environmental (C) or unique environmental factors (E). The method was also applied to various anatomical regions of interest (ROIs). As hypothesized, the overall volumes of the brain, basal ganglia, thalamus, and each lobe were under strong genetic control; local white matter volumes were mostly controlled by common environment. After adjusting for individual differences in overall brain scale, genetic influences were still relatively high in the corpus callosum and in early-maturing brain regions such as the occipital lobes, while environmental influences were greater in frontal brain regions which have a more protracted maturational time-course. PMID:19446645

The study on the evaluation of the pollution control situation of the sewage systems in the counties and cities of Taiwan by applying the VIKOR method.

PubMed

Kuo, Jun-Yuan

2017-12-01

Currently, the pollution control situation of the sewage systems across Taiwan can be divided into the two major sewage systems, namely, industrial area sewage and public community sewage. When the counties and cities of Taiwan cannot effectively control the sewage pollution situation, ecological pollution of the environment and personal health damage would result. Therefore, evaluating the pollution control situation of the sewage systems can help the environmental protection authorities developing strategies for the pollution control of the sewage systems in the future. In this study, the Vise Kriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method was applied to evaluate the pollution control situation of the sewage systems. The water sample test qualification rate, the emission permit issuance rate, and the staff setting rate of the dedicated wastewater treatment company were used as the pollution control evaluation indexes. According to the results, the use of the VIKOR method to evaluate the pollution control situation of the sewage systems is effective. In cities and counties in Taiwan, public community sewage systems, dedicated to pollution control case, the public community should be actively coached in emission control technology to upgrade sewage capacity, the issuance of discharge permits, and the staff setting rate of the dedicated wastewater treatment, to improve public community sewage pollution control system capabilities. In Taiwan, the industrial area sewage systems, dedicated to pollution control situations, must pay attention to business units in raw materials, spare part inventory, and machine supplier of choice, and we must choose to meet environmental supply chain of green suppliers, which would be effective in reducing effluent produce and improve water sample test qualification rate. The VIKOR value of Yilan County is 1.0000, which is the worst in the pollution control of all the industrial area sewage systems, followed by Taoyuan County (0.2253) and Kaohsiung City (0.1334). Other cities and counties of Taiwan have good performance in the pollution control of the industrial area sewage systems. The VIKOR value of Kinmen County is 1.0000, which is the worst pollution control among the all public community sewage systems, followed by Hsinchu County (0.7458) and New Taipei City (0.5527). Among the cities and counties with good pollution control of the public community sewage systems, the best is Chiayi County (0.0000), followed by Kaohsiung City (0.0159) and Hsinchu City (0.0352). Chiayi County is a good performance compromise between all VIKOR values (0.0000), whether in industrial or public community area pollution control sewage systems. Yilan County industrial pollution control has the poorest performance of all the industrial area sewage systems in Taiwan, but in the public community, it ranked as fourth place of all the public community area sewage systems in Taiwan. The VIKOR method proposed in this study can effectively evaluate the pollution control situation of the sewage systems, and serve as a reference for the environmental protection authorities in developing the strategies for the pollution control of the sewage systems.

75 FR 28232 - Availability of an Environmental Assessment for a Biological Control Agent for Hemlock Woolly...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... conditions. Existing HWA management options include chemical control and silvicultural control, which, in...] Availability of an Environmental Assessment for a Biological Control Agent for Hemlock Woolly Adelgid AGENCY... environmental assessment relative to the control of hemlock woolly adelgid (Adelges tsugae). The environmental...

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE--COMPENDIUM OF METHOD SUMMARIES FOR COLLECTION AND ANALYSIS OF METALS, PESTICIDE METABOLITES, AND VOC IN BLOOD AND URINE (CDC-COMPENDIUM)

EPA Science Inventory

This compendium includes method summaries provided by the Centers for Disease Control and Prevention/National Center for Environmental Health (CDC/NCEH) for the collection and shipping of blood and urine samples for analysis of metals and volatile organic compounds (VOCs). The pr...

[Assessment of ecological environment benefits of reclaimed water reuse in Beijing].

PubMed

Fan, Yu-Peng; Chen, Wei-Ping

2014-10-01

With the rapid development of the social economy and the sustained growth of population, China is facing increasingly serious water problems, and reclaimed water utilization has become an effective measure to solve water shortage problem and to control further deterioration of the ecological environment. Reclaimed water utilization can not only save a lot of fresh water, but also reduce the environmental impact of wastewater discharge, and thus has great ecological environmental benefits, including resource, environmental and human health benefits and so on. This study used the opportunity cost method to construct an evaluation system for ecological environmental benefits of reclaimed water utilization, and Beijing was taken as an example to conduct an estimation of ecological environmental benefits of reclaimed water utilization. Research results indicated that the reclaimed water utilization in Beijing had considerable environmental benefits for ¥ 1.2 billion in 2010, in which replacement of fresh water accounted for the largest share. The benefits of environmental improvement and groundwater recharge were large, while the other benefits were small or negative. The ecological environment benefits of reclaimed water utilization in Beijing was about 1.8 times that of its direct economic benefits, showing that reclaimed water utilization was in accordance with sustainable development. Related methods and results will provide scientific basis to promote the development of reclaimed water utilization in our country.

Mitigation of Shore Damage Attributed to the Federal Navigation Structures at Port Sanilac Harbor, Michigan.

DTIC Science & Technology

1975-09-01

beach would be more costly tiian the stockpile method of placement considered for the feeder proposal. 5. COMMENTS REQUESTED: The Draft and this...contractual, and methods of detectinq and avoiding pollution to prevent and correct environmental pollution. QUALITY CONTROL 1.34 The contractor (if...Reliahle ;reat ,,kes wave data measured by wave rnauces are nearly nonexistent for statistical t:eatment. An indirect method of develoz’ina wave data is

ENVIRONMENTALLY CONSCIOUS ELECTROCHEMICAL MACHINING FOR ZERO DISCHARGE AND METAL RECYCLING - PHASE I

EPA Science Inventory

Direct and inverse modelling for environmental risk assessment and emission control

NASA Astrophysics Data System (ADS)

Penenko, V.; Baklanov, A.; Tsvetova, E.; Mahura, A.

2009-04-01

A concept of environmental modelling and its applications for Siberian regions are presented. The regions are considered both as sources and receptors of pollution as elements of the global climatic system. A methodology has been developed to build the combined methods of forward and inverse modelling for the problems of the air quality, environmental risk assessment and control. It is based on variational principles and methods of adjoint sensitivity theory. This allows obtaining the optimal numerical schemes and universal algorithm of the forward-inverse modelling. Following the concept, the functionals (describing the generalised characteristics of the processes, data, and models) are considered together with the basic model components. To combine all these elements in the frames of forward and inverse relations, we suppose that each of them may contain uncertainty. In this case, it is naturally to formulate a weak-constraint variational principle for the augmented functional which contains the model description in the form of integral identity and the cost functional including the total measure of all uncertainties. The stationary conditions for the augmented functional with respect to the variations its functional arguments define the mutually agreed structure of numerical schemes for forward and adjoint problems, and sensitivity relations. For quantitative risk assessment the following characteristics are useful: (i) values of goal functionals and their variations in a form of sensitivity relations; (ii) risk and sensitivity functions to the variations of the sources. It is convenient to take the risk function multiplied by the source function as a distributed risk measure. The variational technique provides the backward propagation of information, contained in the target functionals, to parameters and sources of the models through the sensitivity and uncertainty functions. This gives a base for realisation of the feedback algorithms and methods of control theory, which are necessary for formulation of multi-criteria optimisation accounting different constraints of ecological, economical, and social essence while solving environmental problems such as air pollution control, placement design for new industrial units, etc. The problems of the long-term environmental forecasting demand revealing the dynamical active zones and the areas of increased sensitivity to the variations of forcings (model parameters). The proposed methodology of accounting the climatic data into environmental studies is suitable for studying such problems. Analysis of the long-term behaviour of the global climatic system and orthogonal decomposition of the multivariate series of meteorological data with respect to the scales of processes allows identifying the activity centers and using this information for construction of scenarios for assessment of risk/vulnerability for sources/receptors. Such analysis for Siberian regions showed that Siberia is situated in areas which separate circulation systems of high energy activity. For winter, they are the Pacific and Atlantic energy-active zones, whereas the Arctic and South-Asian zones withstand in Siberia in summer. These facts allow an interpretation of climatic instability inherent in the region. During the autumn-winter season, the instability expresses as sharp alteration of weather cycles. The formation of Altai-Sayan cyclogenesis (which is of the same intensity as the Mediterranean) is observed for the warm seasons in the southern Siberia. In climatology it is referred as a lee-type cyclogenesis. This is the large scale phenomenon in the climatic system of the central part of Eurasia. Such specific hydrodynamic background defines environment quality in Siberia. From the point of view of system analysis, the methods of sensitivity theory, risk assessment and control along with scenario approach offer a tool which allows bringing the results of the global atmospheric and climatic studies onto the regional level. Namely, this level puts the concrete questions on the environment quality and its changes such as a choice of plausible strategy for sources control and mitigation of the man-induced impact on environment. Some environmental problems for Siberian regions are discussed, and a number of forward, adjoint and inverse problems for different risk sites and goal functionals are presented.

Sex pheromone monitoring as a versatile tool for determining presence and abundance of Cydia pomonella (Lep.: Tortricidae) in German apple orchards.

PubMed

Hummel, H E; Czyrt, T; Schmid, S; Leithold, G; Vilcinskas, A

2012-01-01

Cydia pomonella (Lep.: Tortricidae), the codling moth, is an apple, pear, quince and walnut pest with considerable impact on horticultural production systems in many parts of the world. In commercial apple production, it is responsible for a yearly damage level of 40 billion dollars. In response to the need of tight codling moth control there are several options for intervention by pest managers in commercially operated orchards. Spray and count methods have been used for decades with success, but at considerable external costs for the integrity of ecological cycles. Also, problems with pesticide residues and with resistant strains are an issue of concern. For environmental reasons, toxicological means are discounted here. Instead, flight curves based on sex pheromone trapping and monitoring are preferred means towards determining the optimal timing of interventions by biotechnical and biological control methods. Finally, ecological reasons are discussed for vastly different population levels of C. pomonella developing in closely neighboring field sections which operated under different environmental management.

Cotinine analytical workshop report: consideration of analytical methods for determining cotinine in human body fluids as a measure of passive exposure to tobacco smoke.

PubMed Central

Watts, R R; Langone, J J; Knight, G J; Lewtas, J

1990-01-01

A two-day technical workshop was convened November 10-11, 1986, to discuss analytical approaches for determining trace amounts of cotinine in human body fluids resulting from passive exposure to environmental tobacco smoke (ETS). The workshop, jointly sponsored by the U.S. Environmental Protection Agency and Centers for Disease Control, was attended by scientists with expertise in cotinine analytical methodology and/or conduct of human monitoring studies related to ETS. The workshop format included technical presentations, separate panel discussions on chromatography and immunoassay analytical approaches, and group discussions related to the quality assurance/quality control aspects of future monitoring programs. This report presents a consensus of opinion on general issues before the workshop panel participants and also a detailed comparison of several analytical approaches being used by the various represented laboratories. The salient features of the chromatography and immunoassay analytical methods are discussed separately. PMID:2190812

Environmental and occupational health research and training needs in Colombia: A Delphi study

PubMed Central

Rodríguez-Villamizar, Laura A.; González, Beatriz Elena; Vera, Lina María; Patz, Jonathan; Bautista, Leonelo E.

2015-01-01

Introduction Environmental factors contribute with 16% of the burden of disease in Colombia. A main obstacle in implementing national and regional environmental and occupational health policies is the limited knowledge on the local ability to study and control the impact of harmful exposures on health. Objective To identify needs for research and training in environmental and occupational health in Colombia. Materials and methods We conducted a three-round hybrid Delphi study. A group of environmental and occupational health Colombian experts (n=16) from government agencies, universities, and research centers was recruited to participate in the study. Expert’s opinions on research and training needs were gathered through online questionnaires, followed by an in-person meeting. The percentage of agreement and the coefficient of variation were used to measure consensus. Results Air pollution and chemical products were considered the most important environmental and occupational exposures, due to their significant impact on chronic non-communicable diseases, such as respiratory diseases, cardiovascular diseases, and cancer. Research on the effects of outdoor air pollution on cardiovascular and respiratory diseases was considered of the greatest importance. Priority training areas included environmental and occupational health risk assessment, exposure modeling, advanced statistical methods, urban planning, occupational safety and hygiene, and epidemiology and toxicology. Conclusions These findings provide a valuable input for the definition and implementation of national environmental and occupational health policies and for the development of a regional hub aimed at strengthening the capacity for research and training in Colombia. PMID:26535742

The Use of GIS and Remotely Sensed Data in Environmental Public Health Tracking (EPHT): The HELIX-Atlanta Experience

NASA Technical Reports Server (NTRS)

Al-Hamdan, Mohammad Z.; Crosson, William L.; Limaye, Ashutosh S.; Estes, Maurice G., Jr.; Watts, Carol; Rickman, Douglas L.; Quattrochi, Dale A.; Qualters, Judith R.; Sinclair, Amber H.; Tolsma, Dennis D.;

Critical considerations for the application of environmental DNA methods to detect aquatic species

USGS Publications Warehouse

Goldberg, Caren S.; Turner, Cameron R.; Deiner, Kristy; Klymus, Katy E.; Thomsen, Philip Francis; Murphy, Melanie A.; Spear, Stephen F.; McKee, Anna; Oyler-McCance, Sara J.; Cornman, Robert S.; Laramie, Matthew B.; Mahon, Andrew R.; Lance, Richard F.; Pilliod, David S.; Strickler, Katherine M.; Waits, Lisette P.; Fremier, Alexander K.; Takahara, Teruhiko; Herder, Jelger E.; Taberlet, Pierre

2016-01-01

Species detection using environmental DNA (eDNA) has tremendous potential for contributing to the understanding of the ecology and conservation of aquatic species. Detecting species using eDNA methods, rather than directly sampling the organisms, can reduce impacts on sensitive species and increase the power of field surveys for rare and elusive species. The sensitivity of eDNA methods, however, requires a heightened awareness and attention to quality assurance and quality control protocols. Additionally, the interpretation of eDNA data demands careful consideration of multiple factors. As eDNA methods have grown in application, diverse approaches have been implemented to address these issues. With interest in eDNA continuing to expand, supportive guidelines for undertaking eDNA studies are greatly needed.Environmental DNA researchers from around the world have collaborated to produce this set of guidelines and considerations for implementing eDNA methods to detect aquatic macroorganisms.Critical considerations for study design include preventing contamination in the field and the laboratory, choosing appropriate sample analysis methods, validating assays, testing for sample inhibition and following minimum reporting guidelines. Critical considerations for inference include temporal and spatial processes, limits of correlation of eDNA with abundance, uncertainty of positive and negative results, and potential sources of allochthonous DNA.We present a synthesis of knowledge at this stage for application of this new and powerful detection method.

Flow-controlled magnetic particle manipulation

DOEpatents

Grate, Jay W [West Richland, WA; Bruckner-Lea, Cynthia J [Richland, WA; Holman, David A [Las Vegas, NV

2011-02-22

Inventive methods and apparatus are useful for collecting magnetic materials in one or more magnetic fields and resuspending the particles into a dispersion medium, and optionally repeating collection/resuspension one or more times in the same or a different medium, by controlling the direction and rate of fluid flow through a fluid flow path. The methods provide for contacting derivatized particles with test samples and reagents, removal of excess reagent, washing of magnetic material, and resuspension for analysis, among other uses. The methods are applicable to a wide variety of chemical and biological materials that are susceptible to magnetic labeling, including, for example, cells, viruses, oligonucleotides, proteins, hormones, receptor-ligand complexes, environmental contaminants and the like.

Development of an environmental chamber for evaluating the performance of low-cost air quality sensors under controlled conditions

NASA Astrophysics Data System (ADS)

Papapostolou, Vasileios; Zhang, Hang; Feenstra, Brandon J.; Polidori, Andrea

2017-12-01

A state-of-the-art integrated chamber system has been developed for evaluating the performance of low-cost air quality sensors. The system contains two professional grade chamber enclosures. A 1.3 m3 stainless-steel outer chamber and a 0.11 m3 Teflon-coated stainless-steel inner chamber are used to create controlled aerosol and gaseous atmospheres, respectively. Both chambers are temperature and relative humidity controlled with capability to generate a wide range of environmental conditions. The system is equipped with an integrated zero-air system, an ozone and two aerosol generation systems, a dynamic dilution calibrator, certified gas cylinders, an array of Federal Reference Method (FRM), Federal Equivalent Method (FEM), and Best Available Technology (BAT) reference instruments and an automated control and sequencing software. Our experiments have demonstrated that the chamber system is capable of generating stable and reproducible aerosol and gas concentrations at low, medium, and high levels. This paper discusses the development of the chamber system along with the methods used to quantitatively evaluate sensor performance. Considering that a significant number of academic and research institutions, government agencies, public and private institutions, and individuals are becoming interested in developing and using low-cost air quality sensors, it is important to standardize the procedures used to evaluate their performance. The information discussed herein provides a roadmap for entities who are interested in characterizing air quality sensors in a rigorous, systematic and reproducible manner.

Transport jet aircraft noise abatement in foreign countries: Growth, structure, impact. Volume 2: Pacific basin, August 1980

NASA Technical Reports Server (NTRS)

Spencer, F. A.

1980-01-01

Noise control measures at the international airports of Hawaii, New Zealand, Australia, Hong Kong, Japan, and Singapore were studied. Factors in noise control, such as government structure are examined. The increasing power of environmental agencies vis-a-vis aviation departments is noted. The following methods of dealing with aircraft noise are examined by type of control: noise at the source control; noise emmission controls, zoning, building codes, subsidies for relocation, insulation, loss in property values, and for TV, radio and telephone interference; and noise-related landing charges.

A novel approach to simulate gene-environment interactions in complex diseases.

PubMed

Amato, Roberto; Pinelli, Michele; D'Andrea, Daniel; Miele, Gennaro; Nicodemi, Mario; Raiconi, Giancarlo; Cocozza, Sergio

2010-01-05

Complex diseases are multifactorial traits caused by both genetic and environmental factors. They represent the major part of human diseases and include those with largest prevalence and mortality (cancer, heart disease, obesity, etc.). Despite a large amount of information that has been collected about both genetic and environmental risk factors, there are few examples of studies on their interactions in epidemiological literature. One reason can be the incomplete knowledge of the power of statistical methods designed to search for risk factors and their interactions in these data sets. An improvement in this direction would lead to a better understanding and description of gene-environment interactions. To this aim, a possible strategy is to challenge the different statistical methods against data sets where the underlying phenomenon is completely known and fully controllable, for example simulated ones. We present a mathematical approach that models gene-environment interactions. By this method it is possible to generate simulated populations having gene-environment interactions of any form, involving any number of genetic and environmental factors and also allowing non-linear interactions as epistasis. In particular, we implemented a simple version of this model in a Gene-Environment iNteraction Simulator (GENS), a tool designed to simulate case-control data sets where a one gene-one environment interaction influences the disease risk. The main aim has been to allow the input of population characteristics by using standard epidemiological measures and to implement constraints to make the simulator behaviour biologically meaningful. By the multi-logistic model implemented in GENS it is possible to simulate case-control samples of complex disease where gene-environment interactions influence the disease risk. The user has full control of the main characteristics of the simulated population and a Monte Carlo process allows random variability. A knowledge-based approach reduces the complexity of the mathematical model by using reasonable biological constraints and makes the simulation more understandable in biological terms. Simulated data sets can be used for the assessment of novel statistical methods or for the evaluation of the statistical power when designing a study.

A diagnostic prototype of the potable water subsystem of the Space Station Freedom ECLSS

NASA Technical Reports Server (NTRS)

Lukefahr, Brenda D.; Rochowiak, Daniel M.; Benson, Brian L.; Rogers, John S.; Mckee, James W.

1989-01-01

In analyzing the baseline Environmental Control and Life Support System (ECLSS) command and control architecture, various processes are found which would be enhanced by the use of knowledge based system methods of implementation. The most suitable process for prototyping using rule based methods are documented, while domain knowledge resources and other practical considerations are examined. Requirements for a prototype rule based software system are documented. These requirements reflect Space Station Freedom ECLSS software and hardware development efforts, and knowledge based system requirements. A quick prototype knowledge based system environment is researched and developed.

Metal resistant plants and phytoremediation of environmental contamination

DOEpatents

Meagher, Richard B.; Li, Yujing; Dhankher, Om P.

2010-04-20

The present disclosure provides a method of producing transgenic plants which are resistant to at least one metal ion by transforming the plant with a recombinant DNA comprising a nucleic acid encoding a bacterial arsenic reductase under the control of a plant expressible promoter, and a nucleic acid encoding a nucleotide sequence encoding a phytochelatin biosynthetic enzyme under the control of a plant expressible promoter. The invention also relates a method of phytoremediation of a contaminated site by growing in the site a transgenic plant expressing a nucleic acid encoding a bacterial arsenate reductase and a nucleic acid encoding a phytochelatin biosynthetic enzyme.

[Simultaneous determination of 22 typical pharmaceuticals and personal care products in environmental water using ultra performance liquid chromatography- triple quadrupole mass spectrometry].

PubMed

Wu, Chunying; Gu, Feng; Bai, Lu; Lu, Wenlong

2015-08-01

An analytical method for simultaneous determination of 22 typical pharmaceuticals and personal care products (PPCPs) in environmental water samples was developed by ultra performance liquid chromatography-triple quadrupole mass spectrometry (UPLC-MS/MS). An Oasis HLB solid phase extraction cartridge, methanol as washing solution, water containing 0. 1% formic acid-methanol (7:3, v/v) as the mobile phases were selected for sample pretreatment and chromatographic separation. Based on the optimized sample pretreatment procedures and separation condition, the target recoveries ranged from 73% to 125% in water with the relative standard deviations ( RSDs) from 8.8% to 17.5%, and the linear ranges were from 2 to 2 000 µg/L with correlation coefficients (R2) not less than 0.997. The method can be applied to simultaneous determination of the 22 typical PPCPs in environmental water samples because of its low detection limits and high recoveries. It can provide support and help for the related research on water environmental risk assessment and control of the micro-organic pollutants.

Is CO2 emission a side effect of financial development? An empirical analysis for China.

PubMed

Hao, Yu; Zhang, Zong-Yong; Liao, Hua; Wei, Yi-Ming; Wang, Shuo

2016-10-01

Based on panel data for 29 Chinese provinces from 1995 to 2012, this paper explores the relationship between financial development and environmental quality in China. A comprehensive framework is utilized to estimate both the direct and indirect effects of financial development on CO 2 emissions in China using a carefully designed two-stage regression model. The first-difference and orthogonal-deviation Generalized Method of Moments (GMM) methods are used to control for potential endogeneity and introduce dynamics. To ensure the robustness of the estimations, two indicators measuring financial development-financial depth and financial efficiency-are used. The empirical results indicate that the direct effects of financial depth and financial efficiency on environmental quality are positive and negative, respectively. The indirect effects of both indicators are U shaped and dominate the shape of the total effects. These findings suggest that the influences of the financial development on environment depend on the level of economic development. At the early stage of economic growth, financial development is environmentally friendly. When the economy is highly developed, a higher level of financial development is harmful to the environmental quality.

Using magnetic levitation for non-destructive quality control of plastic parts.

PubMed

Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

2015-03-04

Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The bibliography contains citations concerning the use of biological agents to control insects and pests. Radiation, genetic breeding, bacteria, fungi, viruses, and pheromones are discussed as alternatives to pesticidal management. Methods for monitoring the effectiveness and environmental impact of these agents are reviewed. Population control of fruit flies, spruce sawflies, flies, mosquitoes, cockroaches, gypsy moths, and other agriculturally-important insects is also discussed. (Contains a minimum of 190 citations and includes a subject term index and title list.)

Method and Process for the Creation of Modeling and Simulation Tools for Human Crowd Behavior

DTIC Science & Technology

2014-07-23

Support• Program Executive Office Ground Combat Systems • Program Executive Office Soldier TACOM LCMC MG Michael J. Terry Assigned/Direct Support...environmental technologies and explosive ordnance disposal Fire Control: Battlefield digitization; embedded system software; aero ballistics and...MRAD – Handheld stand-off NLW operated by Control Force • Simulated Projectile Weapon • Simulated Handheld Directed Energy NLW ( VDE ) – Simulated

Linking fish tolerance to water quality criteria for the assessment of environmental flows: A practical method for streamflow regulation and pollution control.

PubMed

Zhao, Changsen; Yang, Shengtian; Liu, Junguo; Liu, Changming; Hao, Fanghua; Wang, Zhonggen; Zhang, Huitong; Song, Jinxi; Mitrovic, Simon M; Lim, Richard P

2018-05-15

The survival of aquatic biota in stream ecosystems depends on both water quantity and quality, and is particularly susceptible to degraded water quality in regulated rivers. Maintenance of environmental flows (e-flows) for aquatic biota with optimum water quantity and quality is essential for sustainable ecosystem services, especially in developing regions with insufficient stream monitoring of hydrology, water quality and aquatic biota. Few e-flow methods are available that closely link aquatic biota tolerances to pollutant concentrations in a simple and practical manner. In this paper a new method was proposed to assess e-flows that aimed to satisfy the requirements of aquatic biota for both the quantity and quality of the streamflow by linking fish tolerances to water quality criteria, or the allowable concentration of pollutants. For better operation of water projects and control of pollutants discharged into streams, this paper presented two coefficients for streamflow adjustment and pollutant control. Assessment of e-flows in the Wei River, the largest tributary of the Yellow River, shows that streamflow in dry seasons failed to meet e-flow requirements. Pollutant influx exerted a large pressure on the aquatic ecosystem, with pollutant concentrations much higher than that of the fish tolerance thresholds. We found that both flow velocity and water temperature exerted great influences on the pollutant degradation rate. Flow velocity had a much greater influence on pollutant degradation than did the standard deviation of flow velocity. This study provides new methods to closely link the tolerance of aquatic biota to water quality criteria for e-flow assessment. The recommended coefficients for streamflow adjustment and pollutant control, to dynamically regulate streamflow and control pollutant discharge, are helpful for river management and ecosystems rehabilitation. The relatively low data requirement also makes the method easy to use efficiently in developing regions, and thus this study has significant implications for managing flows in polluted and regulated rivers worldwide. Copyright © 2018. Published by Elsevier Ltd.

Gene-environment interaction between adiponectin gene polymorphisms and environmental factors on the risk of diabetic retinopathy.

PubMed

Li, Yuan; Wu, Qun Hong; Jiao, Ming Li; Fan, Xiao Hong; Hu, Quan; Hao, Yan Hua; Liu, Ruo Hong; Zhang, Wei; Cui, Yu; Han, Li Yuan

2015-01-01

To evaluate whether the adiponectin gene is associated with diabetic retinopathy (DR) risk and interaction with environmental factors modifies the DR risk, and to investigate the relationship between serum adiponectin levels and DR. Four adiponectin polymorphisms were evaluated in 372 DR cases and 145 controls. Differences in environmental factors between cases and controls were evaluated by unconditional logistic regression analysis. The model-free multifactor dimensionality reduction method and traditional multiple regression models were applied to explore interactions between the polymorphisms and environmental factors. Using the Bonferroni method, we found no significant associations between four adiponectin polymorphisms and DR susceptibility. Multivariate logistic regression found that physical activity played a protective role in the progress of DR, whereas family history of diabetes (odds ratio 1.75) and insulin therapy (odds ratio 1.78) were associated with an increased risk for DR. The interaction between the C-11377 G (rs266729) polymorphism and insulin therapy might be associated with DR risk. Family history of diabetes combined with insulin therapy also increased the risk of DR. No adiponectin gene polymorphisms influenced the serum adiponectin levels. Serum adiponectin levels did not differ between the DR group and non-DR group. No significant association was identified between four adiponectin polymorphisms and DR susceptibility after stringent Bonferroni correction. The interaction between C-11377G (rs266729) polymorphism and insulin therapy, as well as the interaction between family history of diabetes and insulin therapy, might be associated with DR susceptibility.

Low aerial imagery - an assessment of georeferencing errors and the potential for use in environmental inventory

NASA Astrophysics Data System (ADS)

Smaczyński, Maciej; Medyńska-Gulij, Beata

2017-06-01

Unmanned aerial vehicles are increasingly being used in close range photogrammetry. Real-time observation of the Earth's surface and the photogrammetric images obtained are used as material for surveying and environmental inventory. The following study was conducted on a small area (approximately 1 ha). In such cases, the classical method of topographic mapping is not accurate enough. The geodetic method of topographic surveying, on the other hand, is an overly precise measurement technique for the purpose of inventorying the natural environment components. The author of the following study has proposed using the unmanned aerial vehicle technology and tying in the obtained images to the control point network established with the aid of GNSS technology. Georeferencing the acquired images and using them to create a photogrammetric model of the studied area enabled the researcher to perform calculations, which yielded a total root mean square error below 9 cm. The performed comparison of the real lengths of the vectors connecting the control points and their lengths calculated on the basis of the photogrammetric model made it possible to fully confirm the RMSE calculated and prove the usefulness of the UAV technology in observing terrain components for the purpose of environmental inventory. Such environmental components include, among others, elements of road infrastructure, green areas, but also changes in the location of moving pedestrians and vehicles, as well as other changes in the natural environment that are not registered on classical base maps or topographic maps.

Coal supply and cost under technological and environmental uncertainty

NASA Astrophysics Data System (ADS)

Chan, Melissa

This thesis estimates available coal resources, recoverability, mining costs, environmental impacts, and environmental control costs for the United States under technological and environmental uncertainty. It argues for a comprehensive, well-planned research program that will resolve resource uncertainty, and innovate new technologies to improve recovery and environmental performance. A stochastic process and cost (constant 2005) model for longwall, continuous, and surface mines based on current technology and mining practice data was constructed. It estimates production and cost ranges within 5-11 percent of 2006 prices and production rates. The model was applied to the National Coal Resource Assessment. Assuming the cheapest mining method is chosen to extract coal, 250-320 billion tons are recoverable. Two-thirds to all coal resource can be mined at a cost less than 4/mmBTU. If U.S. coal demand substantially increases, as projected by alternate Energy Information Administration (EIA), resources might not last more than 100 years. By scheduling cost to meet EIA projected demand, estimated cost uncertainty increases over time. It costs less than 15/ton to mine in the first 10 years of a 100 year time period, 10-30/ton in the following 50 years, and 15-$90/ton thereafter. Environmental impacts assessed are subsidence from underground mines, surface mine pit area, erosion, acid mine drainage, air pollutant and methane emissions. The analysis reveals that environmental impacts are significant and increasing as coal demand increases. Control technologies recommended to reduce these impacts are backfilling underground mines, surface pit reclamation, substitution of robotic underground mining systems for surface pit mining, soil replacement for erosion, placing barriers between exposed coal and the elements to avoid acid formation, and coalbed methane development to avoid methane emissions during mining. The costs to apply these technologies to meet more stringent environmental regulation scenarios are estimated. The results show that the cost of meeting these regulatory scenarios could increase mining costs two to six times the business as usual cost, which could significantly affect the cost of coal-powered electricity generation. This thesis provides a first estimate of resource availability, mining cost, and environmental impact assessment and cost analysis. Available resource is not completely reported, so the available estimate is lower than actual resource. Mining costs are optimized, so provide a low estimate of potential costs. Environmental impact estimates are on the high end of potential impact that may be incurred because it is assumed that impact is unavoidable. Control costs vary. Estimated cost to control subsidence and surface mine pit impacts are suitable estimates of the cost to reduce land impacts. Erosion control and robotic mining system costs are lower, and methane and acid mine drainage control costs are higher, than they may be in the case that these impacts must be reduced.

Expanding integrated vector management to promote healthy environments

PubMed Central

Lizzi, Karina M.; Qualls, Whitney A.; Brown, Scott C.; Beier, John C.

2014-01-01

Integrated Vector Management (IVM) strategies are intended to protect communities from pathogen transmission by arthropods. These strategies target multiple vectors and different ecological and socioeconomic settings, but the aggregate benefits of IVM are limited by the narrow focus of its approach; IVM strategies only aim to control arthropod vectors. We argue that IVM should encompass environmental modifications at early stages, for instance, infrastructural development and sanitation services, to regulate not only vectors but also nuisance-biting arthropods. An additional focus on nuisance-biting arthropods will improve public health, quality of life, and minimize social disparity issues fostered by pests. Optimally, IVM could incorporate environmental awareness and promotion of control methods in order to proactively reduce threats of serious pest situations. PMID:25028090

Sizing up arthropod genomes: an evaluation of the impact of environmental variation on genome size estimates by flow cytometry and the use of qPCR as a method of estimation.

PubMed

Gregory, T Ryan; Nathwani, Paula; Bonnett, Tiffany R; Huber, Dezene P W

2013-09-01

A study was undertaken to evaluate both a pre-existing method and a newly proposed approach for the estimation of nuclear genome sizes in arthropods. First, concerns regarding the reliability of the well-established method of flow cytometry relating to impacts of rearing conditions on genome size estimates were examined. Contrary to previous reports, a more carefully controlled test found negligible environmental effects on genome size estimates in the fly Drosophila melanogaster. Second, a more recently touted method based on quantitative real-time PCR (qPCR) was examined in terms of ease of use, efficiency, and (most importantly) accuracy using four test species: the flies Drosophila melanogaster and Musca domestica and the beetles Tribolium castaneum and Dendroctonus ponderosa. The results of this analysis demonstrated that qPCR has the tendency to produce substantially different genome size estimates from other established techniques while also being far less efficient than existing methods.

Control - Demands mushroom as station grows

NASA Technical Reports Server (NTRS)

Szirmay, S. Z.; Blair, J.

1983-01-01

The NASA space station, which is presently in the planning stage, is to be composed of both rigid and nonrigid modules, rotating elements, and flexible appendages subjected to environmental disturbances from the earth's atmospheric gravity gradient, and magnetic field, as well as solar radiation and self-generated disturbances. Control functions, which will originally include attitude control, docking and berthing control, and system monitoring and management, will with evolving mission objectives come to encompass such control functions as articulation control, autonomous navigation, space traffic control, and large space structure control. Attention is given to the advancements in modular, distributed, and adaptive control methods, as well as system identification and hardware fault tolerance techniques, which will be required.

Fault Diagnosis for the Heat Exchanger of the Aircraft Environmental Control System Based on the Strong Tracking Filter

PubMed Central

Ma, Jian; Lu, Chen; Liu, Hongmei

2015-01-01

The aircraft environmental control system (ECS) is a critical aircraft system, which provides the appropriate environmental conditions to ensure the safe transport of air passengers and equipment. The functionality and reliability of ECS have received increasing attention in recent years. The heat exchanger is a particularly significant component of the ECS, because its failure decreases the system’s efficiency, which can lead to catastrophic consequences. Fault diagnosis of the heat exchanger is necessary to prevent risks. However, two problems hinder the implementation of the heat exchanger fault diagnosis in practice. First, the actual measured parameter of the heat exchanger cannot effectively reflect the fault occurrence, whereas the heat exchanger faults are usually depicted by utilizing the corresponding fault-related state parameters that cannot be measured directly. Second, both the traditional Extended Kalman Filter (EKF) and the EKF-based Double Model Filter have certain disadvantages, such as sensitivity to modeling errors and difficulties in selection of initialization values. To solve the aforementioned problems, this paper presents a fault-related parameter adaptive estimation method based on strong tracking filter (STF) and Modified Bayes classification algorithm for fault detection and failure mode classification of the heat exchanger, respectively. Heat exchanger fault simulation is conducted to generate fault data, through which the proposed methods are validated. The results demonstrate that the proposed methods are capable of providing accurate, stable, and rapid fault diagnosis of the heat exchanger. PMID:25823010

Fault diagnosis for the heat exchanger of the aircraft environmental control system based on the strong tracking filter.

PubMed

Ma, Jian; Lu, Chen; Liu, Hongmei

2015-01-01

The aircraft environmental control system (ECS) is a critical aircraft system, which provides the appropriate environmental conditions to ensure the safe transport of air passengers and equipment. The functionality and reliability of ECS have received increasing attention in recent years. The heat exchanger is a particularly significant component of the ECS, because its failure decreases the system's efficiency, which can lead to catastrophic consequences. Fault diagnosis of the heat exchanger is necessary to prevent risks. However, two problems hinder the implementation of the heat exchanger fault diagnosis in practice. First, the actual measured parameter of the heat exchanger cannot effectively reflect the fault occurrence, whereas the heat exchanger faults are usually depicted by utilizing the corresponding fault-related state parameters that cannot be measured directly. Second, both the traditional Extended Kalman Filter (EKF) and the EKF-based Double Model Filter have certain disadvantages, such as sensitivity to modeling errors and difficulties in selection of initialization values. To solve the aforementioned problems, this paper presents a fault-related parameter adaptive estimation method based on strong tracking filter (STF) and Modified Bayes classification algorithm for fault detection and failure mode classification of the heat exchanger, respectively. Heat exchanger fault simulation is conducted to generate fault data, through which the proposed methods are validated. The results demonstrate that the proposed methods are capable of providing accurate, stable, and rapid fault diagnosis of the heat exchanger.

Robust discovery of genetic associations incorporating gene-environment interaction and independence.

PubMed

Tchetgen Tchetgen, Eric

2011-03-01

This article considers the detection and evaluation of genetic effects incorporating gene-environment interaction and independence. Whereas ordinary logistic regression cannot exploit the assumption of gene-environment independence, the proposed approach makes explicit use of the independence assumption to improve estimation efficiency. This method, which uses both cases and controls, fits a constrained retrospective regression in which the genetic variant plays the role of the response variable, and the disease indicator and the environmental exposure are the independent variables. The regression model constrains the association of the environmental exposure with the genetic variant among the controls to be null, thus explicitly encoding the gene-environment independence assumption, which yields substantial gain in accuracy in the evaluation of genetic effects. The proposed retrospective regression approach has several advantages. It is easy to implement with standard software, and it readily accounts for multiple environmental exposures of a polytomous or of a continuous nature, while easily incorporating extraneous covariates. Unlike the profile likelihood approach of Chatterjee and Carroll (Biometrika. 2005;92:399-418), the proposed method does not require a model for the association of a polytomous or continuous exposure with the disease outcome, and, therefore, it is agnostic to the functional form of such a model and completely robust to its possible misspecification.

Behavior Modification: An Issue for the Teacher?

ERIC Educational Resources Information Center

Garland, LaRetta M.

Modern behavioral scientists have emphasized the importance of environmental influences in human behavior. If the basis for behavior development and change rests within the environment, an understanding and use of the methods of control by change agents, especially teachers, can result in more prosocial behavior. Planned reinforcement could…

30 CFR 550.302 - Definitions concerning air quality.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pollutant means any combination of agents for which the Environmental Protection Agency (EPA) has... is calculated by air quality modeling (or other methods determined by the Administrator of EPA to be... available control technology (BACT) means an emission limitation based on the maximum degree of reduction...

30 CFR 250.302 - Definitions concerning air quality.

Code of Federal Regulations, 2010 CFR

2010-07-01

... any combination of agents for which the Environmental Protection Agency (EPA) has established... by air quality modeling (or other methods determined by the Administrator of EPA to be reliable) not... control technology (BACT) means an emission limitation based on the maximum degree of reduction for each...

30 CFR 550.302 - Definitions concerning air quality.

Code of Federal Regulations, 2012 CFR

2012-07-01

... pollutant means any combination of agents for which the Environmental Protection Agency (EPA) has... is calculated by air quality modeling (or other methods determined by the Administrator of EPA to be... available control technology (BACT) means an emission limitation based on the maximum degree of reduction...

30 CFR 550.302 - Definitions concerning air quality.

Code of Federal Regulations, 2014 CFR

2014-07-01

... pollutant means any combination of agents for which the Environmental Protection Agency (EPA) has... is calculated by air quality modeling (or other methods determined by the Administrator of EPA to be... available control technology (BACT) means an emission limitation based on the maximum degree of reduction...

Thermal Comfort and Sensation in Men Wearing a Cooling System Controlled by Skin Temperature

DTIC Science & Technology

2007-07-01

The study was done to determine whether thermal comfort (TC), thermal sensation (TS), and subjective factors gauging environmental stress were...improvement in thermal comfort . Methods: Eight male volunteers exercised at moderate work intensity (425 W) in three microclimate cooling tests. The

UV-Curable Aerospace Paint Systems

DTIC Science & Technology

2008-02-28

Kevin Josel • Ms. Louise Shutt • Dr. Thomas Phenyl-Bobin • Mr. Rick Osterman US Air Force • Ms. Donna Ballard • Mr. Randy Straw • Dr. Jack Demember...controls • Environmental regulations ban future use Alternative coatings that are available are deficient in: • Application method - cannot spray

The Sterile Insect Technique (SIT) – an introduction

USDA-ARS?s Scientific Manuscript database

Environmental concerns have been a significant motivator in the development of alternative methods to the sole use of chemicals for controlling or even eradicating insect pests. Eradication is the elimination of all individuals of a species from a geographic area where reinvasion is unlikely to occu...

40 CFR 720.78 - Recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT... evaluated under § 720.36(b)(1) to determine the need to make any notification of risk. (ii) Documentation of the nature and method of notification under § 720.36(c)(1) including copies of any labels or written...

THE EMPACT BEACHES PROJECT - A STUDY OF THE PARAMETERS THAT AFFECT MICROBIOLOGICAL MONITORING

EPA Science Inventory

The current U. S. Environmental Protection Agency (EPA) water sample collection method for recreational water was suggested by the Federal Water Pollution Control Agency in 1968 as part of the fecal coliform guideline. Although improvements have been made in the indicator bacter...

40 CFR 761.289 - Compositing samples.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 761.289 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL... Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.289 Compositing samples. Compositing is a method of combining several samples of a specific type of bulk PCB remediation waste or...

40 CFR 761.289 - Compositing samples.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 761.289 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL... Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.289 Compositing samples. Compositing is a method of combining several samples of a specific type of bulk PCB remediation waste or...

40 CFR 761.289 - Compositing samples.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 761.289 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL... Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.289 Compositing samples. Compositing is a method of combining several samples of a specific type of bulk PCB remediation waste or...

Sustainable Approach To Nanomaterials And Their Safer Application In Catalysis And Environmental Remediation

EPA Science Inventory

Vitamins B2, B1, C, tea polyphenols, and natural surfactants, which function both as reducing and capping agents, provide extremely simple, one-pot, green synthetic methods to bulk quantities of nanomaterials in water. Shape-controlled synthesis of noble nanostructures via microw...

Use of relational agents to improve family communication in type 1 diabetes: Methods

USDA-ARS?s Scientific Manuscript database

Physiological and environmental risk factors interact to undermine blood glucose control during early adolescence. This has been documented to be associated with family conflict and poor adherence to diabetes management tasks. Family Teamwork is an efficacious program demonstrated to enhance family ...

40 CFR 86.094-21 - Application for certification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Application for certification. 86.094-21 Section 86.094-21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Compliance will be supported by a brief description of the vehicle's technological method of controlling CO...

40 CFR 86.094-21 - Application for certification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Application for certification. 86.094-21 Section 86.094-21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Compliance will be supported by a brief description of the vehicle's technological method of controlling CO...

Strategies to diagnose and control microbial souring in natural gas storage reservoirs and produced water systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, E.A.; Derr, R.M.; Pope, D.H.

1995-12-31

Hydrogen sulfide production (souring) in natural gas storage reservoirs and produced water systems is a safety and environmental problem that can lead to operational shutdown when local hydrogen sulfide standards are exceeded. Systems affected by microbial souring have historically been treated using biocides that target the general microbial community. However, requirements for more environmentally friendly solutions have led to treatment strategies in which sulfide production can be controlled with minimal impact to the system and environment. Some of these strategies are based on microbial and/or nutritional augmentation of the sour environment. Through research sponsored by the Gas Research Institute (GRI)more » in Chicago, Illinois, methods have been developed for early detection of microbial souring in natural gas storage reservoirs, and a variety of mitigation strategies have been evaluated. The effectiveness of traditional biocide treatment in gas storage reservoirs was shown to depend heavily on the methods by which the chemical is applied. An innovative strategy using nitrate was tested and proved ideal for produced water and wastewater systems. Another strategy using elemental iodine was effective for sulfide control in evaporation ponds and is currently being tested in microbially sour natural gas storage wells.« less

Practical ranges of loudness levels of various types of environmental noise, including traffic noise, aircraft noise, and industrial noise.

PubMed

Salomons, Erik M; Janssen, Sabine A

2011-06-01

In environmental noise control one commonly employs the A-weighted sound level as an approximate measure of the effect of noise on people. A measure that is more closely related to direct human perception of noise is the loudness level. At constant A-weighted sound level, the loudness level of a noise signal varies considerably with the shape of the frequency spectrum of the noise signal. In particular the bandwidth of the spectrum has a large effect on the loudness level, due to the effect of critical bands in the human hearing system. The low-frequency content of the spectrum also has an effect on the loudness level. In this note the relation between loudness level and A-weighted sound level is analyzed for various environmental noise spectra, including spectra of traffic noise, aircraft noise, and industrial noise. From loudness levels calculated for these environmental noise spectra, diagrams are constructed that show the relation between loudness level, A-weighted sound level, and shape of the spectrum. The diagrams show that the upper limits of the loudness level for broadband environmental noise spectra are about 20 to 40 phon higher than the lower limits for narrowband spectra, which correspond to the loudness levels of pure tones. The diagrams are useful for assessing limitations and potential improvements of environmental noise control methods and policy based on A-weighted sound levels.

The implementation of integrated science teaching materials based socio-scientific issues to improve students scientific literacy for environmental pollution theme

NASA Astrophysics Data System (ADS)

Yenni, Rita; Hernani, Widodo, Ari

2017-05-01

The study aims to determine the increasing of students' science literacy skills on content aspects and competency of science by using Integrated Science teaching materials based Socio-scientific Issues (SSI) for environmental pollution theme. The method used in the study is quasi-experiment with nonequivalent pretest and posttest control group design. The students of experimental class used teaching materials based SSI, whereas the students of control class were still using the usual textbooks. The result of this study showed a significant difference between the value of N-gain of experimental class and control class, whichalso occurred in every indicator of content aspects and competency of science. This result indicates that using of Integrated Science teaching materials based SSI can improve content aspect and competency of science and can be used as teaching materials alternative in teaching of Integrated Science.

Tape-cast sensors and method of making

DOEpatents

Mukundan, Rangachary [Santa Fe, NM; Brosha, Eric L [Los Alamos, NM; Garzon, Fernando H [Santa Fe, NM

2009-08-18

A method of making electrochemical sensors in which an electrolyte material is cast into a tape. Prefabricated electrodes are then partially embedded between two wet layers of the electrolyte tape to form a green sensor, and the green sensor is then heated to sinter the electrolyte tape around the electrodes. The resulting sensors can be used in applications such as, but not limited to, combustion control, environmental monitoring, and explosive detection. A electrochemical sensor formed by the tape-casting method is also disclosed.

Analysis of the environmental behavior of farmers for non-point source pollution control and management in a water source protection area in China.

PubMed

Wang, Yandong; Yang, Jun; Liang, Jiping; Qiang, Yanfang; Fang, Shanqi; Gao, Minxue; Fan, Xiaoyu; Yang, Gaihe; Zhang, Baowen; Feng, Yongzhong

2018-08-15

The environmental behavior of farmers plays an important role in exploring the causes of non-point source pollution and taking scientific control and management measures. Based on the theory of planned behavior (TPB), the present study investigated the environmental behavior of farmers in the Water Source Area of the Middle Route of the South-to-North Water Diversion Project in China. Results showed that TPB could explain farmers' environmental behavior (SMC=0.26) and intention (SMC=0.36) well. Furthermore, the farmers' attitude towards behavior (AB), subjective norm (SN), and perceived behavioral control (PBC) positively and significantly influenced their environmental intention; their environmental intention further impacted their behavior. SN was proved to be the main key factor indirectly influencing the farmers' environmental behavior, while PBC had no significant and direct effect. Moreover, environmental knowledge following as a moderator, gender and age was used as control variables to conduct the environmental knowledge on TPB construct moderated mediation analysis. It demonstrated that gender had a significant controlling effect on environmental behavior; that is, males engage in more environmentally friendly behaviors. However, age showed a significant negative controlling effect on pro-environmental intention and an opposite effect on pro-environmental behavior. In addition, environmental knowledge could negatively moderate the relationship between PBC and environmental intention. PBC had a greater impact on the environmental intention of farmers with poor environmental knowledge, compared to those with plenty environmental knowledge. Altogether, the present study could provide a theoretical basis for non-point source pollution control and management. Copyright © 2018 Elsevier B.V. All rights reserved.

Watershed safety and quality control by safety threshold method

NASA Astrophysics Data System (ADS)

Da-Wei Tsai, David; Mengjung Chou, Caroline; Ramaraj, Rameshprabu; Liu, Wen-Cheng; Honglay Chen, Paris

2014-05-01

Taiwan was warned as one of the most dangerous countries by IPCC and the World Bank. In such an exceptional and perilous island, we would like to launch the strategic research of land-use management on the catastrophe prevention and environmental protection. This study used the watershed management by "Safety Threshold Method" to restore and to prevent the disasters and pollution on island. For the deluge prevention, this study applied the restoration strategy to reduce total runoff which was equilibrium to 59.4% of the infiltration each year. For the sediment management, safety threshold management could reduce the sediment below the equilibrium of the natural sediment cycle. In the water quality issues, the best strategies exhibited the significant total load reductions of 10% in carbon (BOD5), 15% in nitrogen (nitrate) and 9% in phosphorus (TP). We found out the water quality could meet the BOD target by the 50% peak reduction with management. All the simulations demonstrated the safety threshold method was helpful to control the loadings within the safe range of disasters and environmental quality. Moreover, from the historical data of whole island, the past deforestation policy and the mistake economic projects were the prime culprits. Consequently, this study showed a practical method to manage both the disasters and pollution in a watershed scale by the land-use management.

The Effect of Environmental Regulation on Employment in Resource-Based Areas of China-An Empirical Research Based on the Mediating Effect Model.

PubMed

Cao, Wenbin; Wang, Hui; Ying, Huihui

2017-12-19

While environmental pollution is becoming more and more serious, many countries are adopting policies to control pollution. At the same time, the environmental regulation will inevitably affect economic and social development, especially employment growth. The environmental regulation will not only affect the scale of employment directly, but it will also have indirect effects by stimulating upgrades in the industrial structure and in technological innovation. This paper examines the impact of environmental regulation on employment, using a mediating model based on the data from five typical resource-based provinces in China from 2000 to 2015. The estimation is performed based on the system GMM (Generalized Method of Moments) estimator. The results show that the implementation of environmental regulation in resource-based areas has both a direct effect and a mediating effect on employment. These findings provide policy implications for these resource-based areas to promote the coordinating development between the environment and employment.

The Effect of Environmental Regulation on Employment in Resource-Based Areas of China—An Empirical Research Based on the Mediating Effect Model

PubMed Central

Cao, Wenbin; Wang, Hui; Ying, Huihui

2017-01-01

While environmental pollution is becoming more and more serious, many countries are adopting policies to control pollution. At the same time, the environmental regulation will inevitably affect economic and social development, especially employment growth. The environmental regulation will not only affect the scale of employment directly, but it will also have indirect effects by stimulating upgrades in the industrial structure and in technological innovation. This paper examines the impact of environmental regulation on employment, using a mediating model based on the data from five typical resource-based provinces in China from 2000 to 2015. The estimation is performed based on the system GMM (Generalized Method of Moments) estimator. The results show that the implementation of environmental regulation in resource-based areas has both a direct effect and a mediating effect on employment. These findings provide policy implications for these resource-based areas to promote the coordinating development between the environment and employment. PMID:29257068

Environmental Tobacco Smoke and Adult-Onset Asthma: A Population-Based Incident Case–Control Study

PubMed Central

Jaakkola, Maritta S.; Piipari, Ritva; Jaakkola, Niina; Jaakkola, Jouni J. K.

2003-01-01

Objectives. The authors assessed the effects of environmental tobacco smoke (ETS) on the development of asthma in adults. Methods. In the Pirkanmaa district of South Finland, all 21- to 63-year-old adults with new cases of asthma diagnosed during a 2.5-year period (n = 521 case patients, out of 441 000 inhabitants) and a random sample of control subjects from the source population (932 control subjects) participated in a population-based incident case–control study. Results. Risk of asthma was related to workplace ETS exposure (adjusted odds ratio [OR] = 2.16; 95% confidence interval [CI] = 1.26, 3.72) and home exposure (OR = 4.77; 95% CI = 1.29, 17.7) in the past year. Cumulative ETS exposure over a lifetime at work and at home increased the risk. Conclusions. This study indicates for the first time that both cumulative lifetime and recent ETS exposures increase the risk of adult-onset asthma. PMID:14652334

Multi-laboratory survey of qPCR enterococci analysis method performance

EPA Pesticide Factsheets

Quantitative polymerase chain reaction (qPCR) has become a frequently used technique for quantifying enterococci in recreational surface waters, but there are several methodological options. Here we evaluated how three method permutations, type of mastermix, sample extract dilution and use of controls in results calculation, affect method reliability among multiple laboratories with respect to sample interference. Multiple samples from each of 22 sites representing an array of habitat types were analyzed using EPA Method 1611 and 1609 reagents with full strength and five-fold diluted extracts. The presence of interference was assessed three ways: using sample processing and PCR amplifications controls; consistency of results across extract dilutions; and relative recovery of target genes from spiked enterococci in water sample compared to control matrices with acceptable recovery defined as 50 to 200%. Method 1609, which is based on an environmental mastermix, was found to be superior to Method 1611, which is based on a universal mastermix. Method 1611 had over a 40% control assay failure rate with undiluted extracts and a 6% failure rate with diluted extracts. Method 1609 failed in only 11% and 3% of undiluted and diluted extracts analyses. Use of sample processing control assay results in the delta-delta Ct method for calculating relative target gene recoveries increased the number of acceptable recovery results. Delta-delta tended to bias recoveries fr

Association of Lead Levels and Cerebral Palsy

PubMed Central

Bansal, Neha; Aggarwal, Anju; Faridi, M. M. A.; Sharma, Tusha; Baneerjee, B. D.

2017-01-01

Background: Cerebral palsy is a common motor disability in childhood. Raised lead levels affect cognition. Children with cerebral palsy may have raised lead levels, further impairing their residual cognitive motor and behavioral abilities. Environmental exposure and abnormal eating habits may lead to increased lead levels. Aims and Objectives: To measure blood lead levels in children with cerebral palsy and compare them with healthy neurologically normal children. To correlate blood lead levels with environmental factors. Material and Methods: Design: Prospective case-control study. Setting: Tertiary care hospital. Participants: Cases comprised 34 children with cerebral palsy, and controls comprised 34 neurologically normal, age- and sex-matched children. Methods: Clinical and demographic details were recorded as per proforma. Detailed environmental history was recorded to know the source of exposure to lead. These children were investigated and treated as per protocol. Venous blood was collected in ethylenediaminetetraacetic acid vials for analysis of blood lead levels. Lead levels were estimated by Schimadzu Flame AA-6800 (atomic absorption spectrophotometer). Data were analyzed using SPSS version 17. P < .05 was taken as significant. Results: Mean blood lead levels were 9.20 ± 8.31 µg/dL in cerebral palsy cases and 2.89 ± 3.04 µg/dL in their controls (P < .001). Among children with cerebral palsy, 19 (55.88%) children had blood lead levels ≥5 µg/dL. Lead levels in children with pica were 12.33 ± 10.02 µg/dL in comparison to children with no history of pica, 6.70 ± 4.60 µg/dL (P = .029). No correlation was found between hemoglobin and blood lead levels in cases and controls. Conclusion: In our study, blood lead levels are raised in children with cerebral palsy. However, further studies are required to show effects of raised levels in these children. PMID:28491920

Self-tuning control of attitude and momentum management for the Space Station

NASA Technical Reports Server (NTRS)

Shieh, L. S.; Sunkel, J. W.; Yuan, Z. Z.; Zhao, X. M.

1992-01-01

This paper presents a hybrid state-space self-tuning design methodology using dual-rate sampling for suboptimal digital adaptive control of attitude and momentum management for the Space Station. This new hybrid adaptive control scheme combines an on-line recursive estimation algorithm for indirectly identifying the parameters of a continuous-time system from the available fast-rate sampled data of the inputs and states and a controller synthesis algorithm for indirectly finding the slow-rate suboptimal digital controller from the designed optimal analog controller. The proposed method enables the development of digitally implementable control algorithms for the robust control of Space Station Freedom with unknown environmental disturbances and slowly time-varying dynamics.

Effects of Messages Emphasizing Environmental Determinants of Obesity on Intentions to Engage in Diet and Exercise Behaviors

PubMed Central

Roh, Sungjong; Shapiro, Michael A.; Kim, Hye Kyung

2013-01-01

Introduction Reducing rates of obesity will require interventions that influence both individual decisions and environmental factors through changes in public policy. Previous work indicates that messages emphasizing environmental determinants increases support for public policies, but some suspect this strategy may undermine motivation to engage in diet and exercise. Methods Study 1 involved 485 adults recruited from a shopping mall in New York. Study 2 involved 718 adult members of a Web-based national panel of US adults. Respondents in both studies were randomly assigned to read a story that emphasized environmental determinants of health or a control condition. The stories varied in the extent to which they described the story character as taking personal responsibility for weight management. Logistic regression and ordered logit models were used to test for differences in intentions to engage in diet and exercise behaviors based on which story the participant read. Analyses were also performed separately by participants’ weight status. Results In both studies, messages that acknowledged personal responsibility while emphasizing environmental causes of obesity increased intentions to engage in healthy behavior for at least 1 weight status group. Conclusion Emphasizing factors outside of personal control appears to enhance rather than undermine motivations to engage in healthy diet and exercise behavior. PMID:24331282

Validation of internal controls for extraction and amplification of nucleic acids from enteric viruses in water samples.

PubMed

Hata, Akihiko; Katayama, Hiroyuki; Kitajima, Masaaki; Visvanathan, Chettiyappan; Nol, Chea; Furumai, Hiroaki

2011-07-01

Inhibitors that reduce viral nucleic acid extraction efficiency and interfere with cDNA synthesis and/or polymerase activity affect the molecular detection of viruses in aquatic environments. To overcome these significant problems, we developed a methodology for assessing nucleic acid yields and DNA amplification efficiencies for environmental water samples. This involved adding particles of adenovirus type 5 and murine norovirus and newly developed primer-sharing controls, which are amplified with the same primer pairs and result in the same amplicon sizes as the targets, to these samples. We found that nucleic acid loss during the extraction process, rather than reverse transcription-PCR (RT-PCR) inhibition, more significantly attributed to underestimation of the presence of viral genomes in the environmental water samples tested in this study. Our success rate for satisfactorily amplifying viral RNAs and DNAs by RT-PCR was higher than that for obtaining adequate nucleic acid preparations. We found that inhibitory properties were greatest when we used larger sample volumes. A magnetic silica bead-based RNA extraction method effectively removed inhibitors that interfere with viral nucleic acid extraction and RT-PCR. To our knowledge, this is the first study to assess the inhibitory properties of environmental water samples by using both control virus particles and primer-sharing controls.

Environmental Chemicals in Urine and Blood: Improving Methods for Creatinine and Lipid Adjustment.

PubMed

O'Brien, Katie M; Upson, Kristen; Cook, Nancy R; Weinberg, Clarice R

2016-02-01

Investigators measuring exposure biomarkers in urine typically adjust for creatinine to account for dilution-dependent sample variation in urine concentrations. Similarly, it is standard to adjust for serum lipids when measuring lipophilic chemicals in serum. However, there is controversy regarding the best approach, and existing methods may not effectively correct for measurement error. We compared adjustment methods, including novel approaches, using simulated case-control data. Using a directed acyclic graph framework, we defined six causal scenarios for epidemiologic studies of environmental chemicals measured in urine or serum. The scenarios include variables known to influence creatinine (e.g., age and hydration) or serum lipid levels (e.g., body mass index and recent fat intake). Over a range of true effect sizes, we analyzed each scenario using seven adjustment approaches and estimated the corresponding bias and confidence interval coverage across 1,000 simulated studies. For urinary biomarker measurements, our novel method, which incorporates both covariate-adjusted standardization and the inclusion of creatinine as a covariate in the regression model, had low bias and possessed 95% confidence interval coverage of nearly 95% for most simulated scenarios. For serum biomarker measurements, a similar approach involving standardization plus serum lipid level adjustment generally performed well. To control measurement error bias caused by variations in serum lipids or by urinary diluteness, we recommend improved methods for standardizing exposure concentrations across individuals.

Understanding the rates of nonpolar organic chemical accumulation into passive samplers deployed in the environment: Guidance for passive sampler deployments.

PubMed

Apell, Jennifer N; Tcaciuc, A Patricia; Gschwend, Philip M

2016-07-01

Polymeric passive samplers have become a common method for estimating freely dissolved concentrations in environmental media. However, this approach has not yet been adopted by investigators conducting remedial investigations of contaminated environmental sites. Successful adoption of this sampling methodology relies on an understanding of how passive samplers accumulate chemical mass as well as developing guidance for the design and deployment of passive samplers. Herein, we outline the development of a simple mathematical relationship of the environmental, polymer, and chemical properties that control the uptake rate. This relationship, called a timescale, is then used to illustrate how each property controls the rate of equilibration in samplers deployed in the water or in the sediment. Guidance is also given on how to use the timescales to select an appropriate polymer, deployment time, and suite of performance reference compounds. Integr Environ Assess Manag 2016;12:486-492. © 2015 SETAC. © 2015 SETAC.

Importance of good manufacturing practices in microbiological monitoring in processing human tissues for transplant.

PubMed

Pianigiani, Elisa; Ierardi, Francesca; Fimiani, Michele

2013-12-01

Skin allografts represent an important therapeutic resource in the treatment of severe skin loss. The risk associated with application of processed tissues in humans is very low, however, human material always carries the risk of disease transmission. To minimise the risk of contamination of grafts, processing is carried out in clean rooms where air quality is monitored. Procedures and quality control tests are performed to standardise the production process and to guarantee the final product for human use. Since we only validate and distribute aseptic tissues, we conducted a study to determine what type of quality controls for skin processing are the most suitable for detecting processing errors and intercurrent contamination, and for faithfully mapping the process without unduly increasing production costs. Two different methods for quality control were statistically compared using the Fisher exact test. On the basis of the current study we selected our quality control procedure based on pre- and post-processing tissue controls, operator and environmental controls. Evaluation of the predictability of our control methods showed that tissue control was the most reliable method of revealing microbial contamination of grafts. We obtained 100 % sensitivity by doubling tissue controls, while maintaining high specificity (77 %).

Advances in mass spectrometric characterization of naphthenic acids fraction compounds in oil sands environmental samples and crude oil--A review.

PubMed

Headley, John V; Peru, Kerry M; Barrow, Mark P

2016-01-01

There has been a recent surge in the development of mass spectrometric methods for detailed characterization of naphthenic acid fraction compounds (all C(c)H(h)N(n)O(o)S(s), species, including heteroatomic and aromatic components in the acid-extractable fraction) in environmental samples. This surge is driven by the increased activity in oil sands environmental monitoring programs in Canada, the exponential increase in research studies on the isolation and toxicity identification of components in oil sands process water (OSPW), and the analytical requirements for development of technologies for treatment of OSPW. There has been additional impetus due to the parallel studies to control corrosion from naphthenic acids during the mining and refining of heavy bitumen and crude oils. As a result, a range of new mass spectrometry tools have been introduced since our last major review of this topic in 2009. Of particular significance are the developments of combined mass spectrometric methods that incorporate technologies such as gas chromatography, liquid chromatography, and ion mobility. There has been additional progress with respect to improved visualization methods for petroleomics and oil sands environmental forensics. For comprehensive coverage and more reliable characterization of samples, an approach based on multiple-methods that employ two or more ionization modes is recommended. On-line or off-line fractionation of isolated extracts, with or without derivatization, might also be used prior to mass spectrometric analyses. Individual ionization methods have their associated strengths and weaknesses, including biases, and thus dependence upon a single ionization method is potentially misleading. There is also a growing trend to not rely solely on low-resolution mass spectrometric methods (<20,000 resolving power at m/z 200) for characterization of complex samples. Future research is anticipated to focus upon (i) structural elucidation of components to determine the correlation with toxicity or corrosion, (ii) verification of characterization studies based on authentic reference standards and reference materials, and (iii) integrated approaches based on multiple-methods and ionization methods for more-reliable oil sands environmental forensics. © 2015 Wiley Periodicals, Inc.

Sensory synergy as environmental input integration

PubMed Central

Alnajjar, Fady; Itkonen, Matti; Berenz, Vincent; Tournier, Maxime; Nagai, Chikara; Shimoda, Shingo

2015-01-01

The development of a method to feed proper environmental inputs back to the central nervous system (CNS) remains one of the challenges in achieving natural movement when part of the body is replaced with an artificial device. Muscle synergies are widely accepted as a biologically plausible interpretation of the neural dynamics between the CNS and the muscular system. Yet the sensorineural dynamics of environmental feedback to the CNS has not been investigated in detail. In this study, we address this issue by exploring the concept of sensory synergy. In contrast to muscle synergy, we hypothesize that sensory synergy plays an essential role in integrating the overall environmental inputs to provide low-dimensional information to the CNS. We assume that sensor synergy and muscle synergy communicate using these low-dimensional signals. To examine our hypothesis, we conducted posture control experiments involving lateral disturbance with nine healthy participants. Proprioceptive information represented by the changes on muscle lengths were estimated by using the musculoskeletal model analysis software SIMM. Changes on muscles lengths were then used to compute sensory synergies. The experimental results indicate that the environmental inputs were translated into the two dimensional signals and used to move the upper limb to the desired position immediately after the lateral disturbance. Participants who showed high skill in posture control were found to be likely to have a strong correlation between sensory and muscle signaling as well as high coordination between the utilized sensory synergies. These results suggest the importance of integrating environmental inputs into suitable low-dimensional signals before providing them to the CNS. This mechanism should be essential when designing the prosthesis' sensory system to make the controller simpler. PMID:25628523

Assessing the Role of Environmental Conditions on Efficacy Rates of Heterorhabditis indica (Nematoda: Heterorhabditidae) for Controlling Aethina tumida (Coleoptera: Nitidulidae) in Honey Bee (Hymenoptera: Apidae) Colonies: a Citizen Science Approach.

PubMed

Hill, Elizabeth S; Smythe, Ashleigh B; Delaney, Deborah A

2016-02-01

Certain species of entomopathogenic nematodes, such as Heterorhabditis indica Poinar, Karunakar & David, have the potential to be effective controls for Aethina tumida (Murray), or small hive beetles, when applied to the soil surrounding honey bee (Apis mellifera L.) hives. Despite the efficacy of H. indica, beekeepers have struggled to use them successfully as a biocontrol. It is believed that the sensitivity of H. indica to certain environmental conditions is the primary reason for this lack of success. Although research has been conducted to explore the impact of specific environmental conditions--such as soil moisture or soil temperature-on entomopathogenic nematode infectivity, no study to date has taken a comprehensive approach that considers the impact of multiple environmental conditions simultaneously. In exploring this, a multivariate logistic regression model was used to determine what environmental conditions resulted in reductions of A. tumida populations in honey bee colonies. To obtain the sample sizes necessary to run a multivariate logistic regression, this study utilized citizen scientist beekeepers and their hives from across the mid-Atlantic region of the United States. Results suggest that soil moisture, soil temperatures, sunlight exposure, and groundcover contribute to the efficacy of H. indica in reducing A. tumida populations in A. mellifera colonies. The results of this study offer direction for future research on the environmental preferences of H. indica and can be used to educate beekeepers about methods for better utilizing H. indica as a biological control. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The bibliography contains citations concerning the use of biological agents to control insects and pests. Radiation, genetic breeding, bacteria, fungi, viruses, and pheromones are discussed as alternatives to pesticidal management. Methods for monitoring the effectiveness and environmental impact of these agents are reviewed. Population control of fruit flies, spruce sawflies, flies, mosquitoes, cockroaches, gypsy moths, and other agriculturally-important insects is also discussed. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

Development of NIRS method for quality control of drug combination artesunate–azithromycin for the treatment of severe malaria

PubMed Central

Boyer, Chantal; Gaudin, Karen; Kauss, Tina; Gaubert, Alexandra; Boudis, Abdelhakim; Verschelden, Justine; Franc, Mickaël; Roussille, Julie; Boucher, Jacques; Olliaro, Piero; White, Nicholas J.; Millet, Pascal; Dubost, Jean-Pierre

2012-01-01

Near infrared spectroscopy (NIRS) methods were developed for the determination of analytical content of an antimalarial-antibiotic (artesunate and azithromycin) co-formulation in hard gelatin capsule (HGC). The NIRS consists of pre-processing treatment of spectra (raw spectra and first-derivation of two spectral zones), a unique principal component analysis model to ensure the specificity and then two partial least-squares regression models for the determination content of each active pharmaceutical ingredient. The NIRS methods were developed and validated with no reference method, since the manufacturing process of HGC is basically mixed excipients with active pharmaceutical ingredients. The accuracy profiles showed β-expectation tolerance limits within the acceptance limits (±5%). The analytical control approach performed by reversed phase (HPLC) required two different methods involving two different preparation and chromatographic methods. NIRS offers advantages in terms of lower costs of equipment and procedures, time saving, environmentally friendly. PMID:22579599

Temperature-controlled micro-TLC: a versatile green chemistry and fast analytical tool for separation and preliminary screening of steroids fraction from biological and environmental samples.

PubMed

Zarzycki, Paweł K; Slączka, Magdalena M; Zarzycka, Magdalena B; Bartoszuk, Małgorzata A; Włodarczyk, Elżbieta; Baran, Michał J

2011-11-01

This paper is a continuation of our previous research focusing on development of micro-TLC methodology under temperature-controlled conditions. The main goal of present paper is to demonstrate separation and detection capability of micro-TLC technique involving simple analytical protocols without multi-steps sample pre-purification. One of the advantages of planar chromatography over its column counterpart is that each TLC run can be performed using non-previously used stationary phase. Therefore, it is possible to fractionate or separate complex samples characterized by heavy biological matrix loading. In present studies components of interest, mainly steroids, were isolated from biological samples like fish bile using single pre-treatment steps involving direct organic liquid extraction and/or deproteinization by freeze-drying method. Low-molecular mass compounds with polarity ranging from estetrol to progesterone derived from the environmental samples (lake water, untreated and treated sewage waters) were concentrated using optimized solid-phase extraction (SPE). Specific bands patterns for samples derived from surface water of the Middle Pomerania in northern part of Poland can be easily observed on obtained micro-TLC chromatograms. This approach can be useful as simple and non-expensive complementary method for fast control and screening of treated sewage water discharged by the municipal wastewater treatment plants. Moreover, our experimental results show the potential of micro-TLC as an efficient tool for retention measurements of a wide range of steroids under reversed-phase (RP) chromatographic conditions. These data can be used for further optimalization of SPE or HPLC systems working under RP conditions. Furthermore, we also demonstrated that micro-TLC based analytical approach can be applied as an effective method for the internal standard (IS) substance search. Generally, described methodology can be applied for fast fractionation or screening of the whole range of target substances as well as chemo-taxonomic studies and fingerprinting of complex mixtures, which are present in biological or environmental samples. Due to low consumption of eluent (usually 0.3-1mL/run) mainly composed of water-alcohol binary mixtures, this method can be considered as environmentally friendly and green chemistry focused analytical tool, supplementary to analytical protocols involving column chromatography or planar micro-fluidic devices. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of Diesel Exhaust Continuous Monitors in Controlled Environmental Conditions

PubMed Central

Yu, Chang Ho; Patton, Allison P.; Zhang, Andrew; Fanac, Zhi-Hua (Tina); Weisel, Clifford P.; Lioy, Paul J.

2015-01-01

Diesel exhaust (DE) contains a variety of toxic air pollutants, including diesel particulate matter (DPM) and gaseous contaminants (e.g., carbon monoxide (CO)). DPM is dominated by fine (PM2.5) and ultrafine particles (UFP), and can be representatively determined by its thermal-optical refractory as elemental carbon (EC) or light-absorbing characteristics as black carbon (BC). The currently accepted reference method for sampling and analysis of occupational exposure to DPM is the National Institute for Occupational Safety and Health (NIOSH) Method 5040. However, this method cannot provide in-situ short-term measurements of DPM. Thus, real-time monitors are gaining attention to better examine DE exposures in occupational settings. However, real-time monitors are subject to changing environmental conditions. Field measurements have reported interferences in optical sensors and subsequent real-time readings, under conditions of high humidity and abrupt temperature changes. To begin dealing with these issues, we completed a controlled study to evaluate five real-time monitors: Airtec real-time DPM/EC Monitor, TSI SidePak Personal Aerosol Monitor AM510 (PM2.5), TSI Condensation Particle Counter 3007, microAeth AE51 BC Aethalometer, and Langan T15n CO Measurer. Tests were conducted under different temperatures (55, 70, and 80 °F), relative humidity (10, 40, and 80%), and DPM concentrations (50 and 200 µg/m3) in a controlled exposure facility. The 2-hour averaged EC measurements from the Airtec instrument showed relatively good agreement with NIOSH Method 5040 (R2=0.84; slope=1.17±0.06; N=27) and reported ~17% higher EC concentrations than the NIOSH reference method. Temperature, relative humidity, and DPM levels did not significantly affect relative differences in 2-hour averaged EC concentrations obtained by the Airtec instrument versus the NIOSH method (p<0.05). Multiple linear regression analyses, based on 1-min averaged data, suggested combined effects of up to 5% from relative humidity and temperature on real-time measurements. The overall deviations of these real-time monitors from the NIOSH method results were ≤20%. However, simultaneous monitoring of temperature and relative humidity is recommended in field investigations to understand and correct for environmental impacts on real-time monitoring data. PMID:25894766

30 CFR 250.302 - Definitions concerning air quality.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and 250.304 of this part: Air pollutant means any combination of agents for which the Environmental... shown by monitored data or which is calculated by air quality modeling (or other methods determined by... standards established by EPA. Best available control technology (BACT) means an emission limitation based on...

Asbestos-Containing Materials in School Buildings: A Guidance Document. Part 2.

ERIC Educational Resources Information Center

Sawyer, Robert N.; Spooner, Charles M.

Part 2 of the Environmental Protection Agency (EPA) guidance manuals consists of more detailed information on asbestos identification and control methods. Available information on sprayed asbestos-containing materials in buildings is summarized. Guidelines are presented for the detection and monitoring, removal or encapsulation, and disposal of…

A generic risk-based surveying method for invading plant pathogens

USDA-ARS?s Scientific Manuscript database

Invasive plant pathogens are increasing with international trade and travel with damaging environmental and economic consequences. Recent examples include tree diseases such as Sudden Oak Death in the Western US and Ash Dieback in Europe. To control an invading pathogen it is crucial that newly in...

Controlling the Radon Threat Needn't Be Another Costly Nightmare.

ERIC Educational Resources Information Center

Freije, Matthew R.

1989-01-01

After a study of 3,000 classrooms in 130 schools in 16 states, the Environmental Protection Agency urged all schools to conduct tests for radon. Explains a 6-step screening test, methods of reducing radon concentrations, and how the risk from radon exposure compares with other risks. (MLF)

High-speed civil transport study: Special factors

NASA Technical Reports Server (NTRS)

1990-01-01

Studies relating to environmental factors associated with high speed civil transports were conducted. Projected total engine emissions for year 2015 fleets of several subsonic/supersonic transport fleet scenarios, discussion of sonic boom reduction methods, discussion of community noise level requirements, fuels considerations, and air traffic control impact are presented.

Development of a real-time chemical injection system for air-assisted variable-rate sprayers

USDA-ARS?s Scientific Manuscript database

A chemical injection system is an effective method to minimize chemical waste and reduce the environmental pollution in pesticide spray applications. A microprocessor controlled injection system implementing a ceramic piston metering pump was developed to accurately dispense chemicals to be mixed wi...

Proceedings of the NASA/Florida Institute of Technology Environmental Engineering Conference on Nitrogen Tetroxide. [with emphasis on space shuttle

NASA Technical Reports Server (NTRS)

Rhodes, E. L.

1978-01-01

Methods of reducing the user hazards of nitrogen tetroxide, a hypergolic oxidizer are discussed. Kennedy Space Center developments in N2O4 control for the space shuttle are featured. Other areas covered are life support equipment and transportation.

Evaluation of recovery and monitoring methods for parasitoids released against Emerald Ash Borer

USDA-ARS?s Scientific Manuscript database

The emerald ash borer (Agrilus planipennis Fairmaire, EAB) is an invasive insect pest, and the target of an extensive biological control campaign designed to mitigate EAB driven ash tree (Fraxinus spp.) mortality. Since 2007, environmental releases of three species of hymenopteran parasitoids of EA...

Novel Electroactive Polymers as Environmentally Compliant Coatings for Corrosion Control

DTIC Science & Technology

2006-02-03

Gravametric Analysis (TGA) and Differential Scanning Calorimetry (DSC), respectively. In this work the polymers were characterized by cyclic voltametry ...or less. The Temperature Step / Frequency Sweep method was employed where data were collected from –40 to 100°C and 0.1-100 Hz at a resolution of

Sustainable Strategies For The Production Of Nanomaterials And Their Application In Green Environmental Remediation.

EPA Science Inventory

Vitamins B2, B1, C, tea polyphenols, and natural surfactants, which function both as reducing and capping agents, provide extremely simple, one-pot, green synthetic methods to bulk quantities of nanomaterials in water. Shape-controlled synthesis of noble nanostructures via microw...

Factors influencing Phytophthora ramorum infectivity on Umbellularia californica and testing of a defoliation-based control method

Treesearch

Christine Windsor Colijn; Michael Cohen; Steve Johnston; Whalen Dillon; Nathan Rank

2013-01-01

The primary foliar host for Phytophthora ramorum is California bay laurel, Umbellularia californica (Hook. & Arn.) Nutt., a main reservoir for the pathogen in California woodlands. We investigated environmental and pathogen-mediated influences on incidence and severity of P. ramorum infection of

Energy technology characterizations handbook: environmental pollution and control factors. Third edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-03-01

This Handbook deals with environmental characterization information for a range of energy-supply systems and provides supplementary information on environmental controls applicable to a select group of environmentally characterized energy systems. Environmental residuals, physical-resource requirements, and discussion of applicable standards are the principal information provided. The quantitative and qualitative data provided are useful for evaluating alternative policy and technical strategies and for assessing the environmental impact of facility siting, energy production, and environmental controls.

Modern trends in infection control practices in intensive care units.

PubMed

Gandra, Sumanth; Ellison, Richard T

2014-01-01

Hospital-acquired infections (HAIs) are common in intensive care unit (ICU) patients and are associated with increased morbidity and mortality. There has been an increasing effort to prevent HAIs, and infection control practices are paramount in avoiding these complications. In the last several years, numerous developments have been seen in the infection prevention strategies in various health care settings. This article reviews the modern trends in infection control practices to prevent HAIs in ICUs with a focus on methods for monitoring hand hygiene, updates in isolation precautions, new methods for environmental cleaning, antimicrobial bathing, prevention of ventilator-associated pneumonia, central line-associated bloodstream infections, catheter-associated urinary tract infections, and Clostridium difficile infection. © The Author(s) 2013.

Impact of Spent Mushroom Substrates on the Fate of Pesticides in Soil, and Their Use for Preventing and/or Controlling Soil and Water Contamination: A Review

PubMed Central

Marín-Benito, Jesús M.; Sánchez-Martín, María J.; Rodríguez-Cruz, M. Sonia

2016-01-01

Intensive crop production involves a high consumption of pesticides. This is a cause of major environmental concern because the presence of pesticides in water is becoming increasingly common. Physicochemical methods based on soil modification with organic residues have been developed to enhance the immobilization and/or degradation of pesticides in agricultural soils, which may control both the diffuse and the point pollution of soils and waters. This review summarizes the influence of spent mushroom substrate (SMS) on the environmental fate of pesticides when both are simultaneously applied in agriculture. The processes of adsorption, leaching and dissipation of these compounds in SMS-amended soils were evaluated at laboratory and field scale. Relationships were established between the experimental parameters obtained and the properties of the soils, the SMS, and the pesticides in order to determine the effect that the application of SMS in agricultural soils has on the environmental impact of pesticides. Accordingly, this review highlights the use of SMS as a strategy for the prevention and/or control of soil and water contamination by pesticides to strike a balance between agricultural development and the use of these compounds. PMID:29051422

The Environmental Action Internal Control Index.

ERIC Educational Resources Information Center

Smith-Sebasto, N. J.; Fortner, Rosanne W.

1994-01-01

Reports research designed to develop a reliable and valid instrument to assess the relationship between locus of control of reinforcement and environmentally responsible behavior in (n=853) undergraduate students. Results suggest that the Environmental Action Internal Control Index can accurately predict environmentally responsible behavior.…

Microwave Heating as an Alternative Quarantine Method for Disinfestation of Stored Food Grains

PubMed Central

Kumar, Girish; Shah, Narendra G.

2013-01-01

Insects and pests constitute a major threat to food supplies all over the world. Some estimates put the loss of food grains because of infestation to about 40% of the world production. Contemporary disinfestation methods are chemical fumigation, ionizing radiation, controlled atmosphere, conventional hot air treatment, and dielectric heating, that is, radio frequency and microwave energy, and so forth. Though chemical fumigation is being used extensively in stored food grains, regulatory issues, insect resistance, and environmental concerns demand technically effective and environmentally sound quarantine methods. Recent studies have indicated that microwave treatment is a potential means of replacing other techniques because of selective heating, pollution free environment, equivalent or better quality retention, energy minimization, and so forth. The current paper reviews the recent advances in Microwave (MW) disinfestation of stored food products and its principle and experimental results from previous studies in order to establish the usefulness of this technology. PMID:26904615

Sparse modeling of spatial environmental variables associated with asthma

PubMed Central

Chang, Timothy S.; Gangnon, Ronald E.; Page, C. David; Buckingham, William R.; Tandias, Aman; Cowan, Kelly J.; Tomasallo, Carrie D.; Arndt, Brian G.; Hanrahan, Lawrence P.; Guilbert, Theresa W.

2014-01-01

Geographically distributed environmental factors influence the burden of diseases such as asthma. Our objective was to identify sparse environmental variables associated with asthma diagnosis gathered from a large electronic health record (EHR) dataset while controlling for spatial variation. An EHR dataset from the University of Wisconsin’s Family Medicine, Internal Medicine and Pediatrics Departments was obtained for 199,220 patients aged 5–50 years over a three-year period. Each patient’s home address was geocoded to one of 3,456 geographic census block groups. Over one thousand block group variables were obtained from a commercial database. We developed a Sparse Spatial Environmental Analysis (SASEA). Using this method, the environmental variables were first dimensionally reduced with sparse principal component analysis. Logistic thin plate regression spline modeling was then used to identify block group variables associated with asthma from sparse principal components. The addresses of patients from the EHR dataset were distributed throughout the majority of Wisconsin’s geography. Logistic thin plate regression spline modeling captured spatial variation of asthma. Four sparse principal components identified via model selection consisted of food at home, dog ownership, household size, and disposable income variables. In rural areas, dog ownership and renter occupied housing units from significant sparse principal components were associated with asthma. Our main contribution is the incorporation of sparsity in spatial modeling. SASEA sequentially added sparse principal components to Logistic thin plate regression spline modeling. This method allowed association of geographically distributed environmental factors with asthma using EHR and environmental datasets. SASEA can be applied to other diseases with environmental risk factors. PMID:25533437

Sparse modeling of spatial environmental variables associated with asthma.

PubMed

Chang, Timothy S; Gangnon, Ronald E; David Page, C; Buckingham, William R; Tandias, Aman; Cowan, Kelly J; Tomasallo, Carrie D; Arndt, Brian G; Hanrahan, Lawrence P; Guilbert, Theresa W

2015-02-01

Geographically distributed environmental factors influence the burden of diseases such as asthma. Our objective was to identify sparse environmental variables associated with asthma diagnosis gathered from a large electronic health record (EHR) dataset while controlling for spatial variation. An EHR dataset from the University of Wisconsin's Family Medicine, Internal Medicine and Pediatrics Departments was obtained for 199,220 patients aged 5-50years over a three-year period. Each patient's home address was geocoded to one of 3456 geographic census block groups. Over one thousand block group variables were obtained from a commercial database. We developed a Sparse Spatial Environmental Analysis (SASEA). Using this method, the environmental variables were first dimensionally reduced with sparse principal component analysis. Logistic thin plate regression spline modeling was then used to identify block group variables associated with asthma from sparse principal components. The addresses of patients from the EHR dataset were distributed throughout the majority of Wisconsin's geography. Logistic thin plate regression spline modeling captured spatial variation of asthma. Four sparse principal components identified via model selection consisted of food at home, dog ownership, household size, and disposable income variables. In rural areas, dog ownership and renter occupied housing units from significant sparse principal components were associated with asthma. Our main contribution is the incorporation of sparsity in spatial modeling. SASEA sequentially added sparse principal components to Logistic thin plate regression spline modeling. This method allowed association of geographically distributed environmental factors with asthma using EHR and environmental datasets. SASEA can be applied to other diseases with environmental risk factors. Copyright © 2014 Elsevier Inc. All rights reserved.

Use of Remote Sensing/Geographical Information Systems (RS/GIS) to Identify the Distributional Limits of Soil-Transmitted Helminths (STHs) and Their Association to Prevalence of Intestinal Infection in School-Age Children in Four Rural Communities in Boaco, Nicaragua

NASA Technical Reports Server (NTRS)

Moreno, Max J.; Al-Hamdan, Mohammad Z.; Parajon, David G.; Rickman, Douglas L.; Luvall, Jeffrey; Parajon, Laura C.; Martinez, Roberto A.; Estes, Sue

2011-01-01

STHs can infect all members of a population but school-age children living in poverty are at greater risk. Infection can be controlled with drug treatment, health education and sanitation. Helminth control programs often lack resources and reliable information to identify areas of highest risk to guide interventions and to monitor progress. Objectives: To use RS/GIS to identify the environmental variables that correlate with the ecology of STHs and with the prevalence of STH infections. Methods: Geo-referenced in situ prevalence data will be overlaid over an ecological map derived from the RS environmental data using ESRI s ArcGIS 9.3. Prevalence data and RS environmental data matching at the same geographical location will be analyzed for correlation and those RS environmental variables that better correlate with prevalence data will be included in a multivariate regression model. Temperature, vegetation, and distance to bodies of water will be inferred using data from the Moderate-Resolution Imaging Spectroradiometer (MODIS) onboard the Terra and Aqua satellites, and Thematic Mapper (TM) and Enhance Thematic Mapper Plus (ETM+) satellite sensors onboard Landsat 5 and Landsat 7 respectively. Elevation will be estimated with data from The Shuttle Radar Topography Mission (SRTM). Prevalence and intensity of infections will be determined by parasitological survey (Kato Katz) of children enrolled in rural schools in Boaco, Nicaragua, in the communities of El Roblar, Cumaica Norte, Malacatoya 1, and Malacatoya 2). Expected Results: Associations between RS environmental data and prevalence in situ data will be determined and their applications to public health will be discussed. Discussion/Conclusions: The use of RS/GIS data to predict the prevalence of STH infections could be useful for helminth control programs, providing improved geographical guidance of interventions while increasing cost-effectiveness. Learning Objectives: (1) To identify the RS environmental variables that can help predict the prevalence of STH infections. (2) To understand potential applications of RS/GIS to national helminth control programs. (3) To asses the applicability of RS/GIS to control STH infections.

Environmental compatibility of closed landfills - assessing future pollution hazards.

PubMed

Laner, David; Fellner, Johann; Brunner, Paul H

2011-01-01

Municipal solid waste landfills need to be managed after closure. This so-called aftercare comprises the treatment and monitoring of residual emissions as well as the maintenance and control of landfill elements. The measures can be terminated when a landfill does not pose a threat to the environment any more. Consequently, the evaluation of landfill environmental compatibility includes an estimation of future pollution hazards as well as an assessment of the vulnerability of the affected environment. An approach to assess future emission rates is presented and discussed in view of long-term environmental compatibility. The suggested method consists (a) of a continuous model to predict emissions under the assumption of constant landfill conditions, and (b) different scenarios to evaluate the effects of changing conditions within and around the landfill. The model takes into account the actual status of the landfill, hence different methods to gain information about landfill characteristics have to be applied. Finally, assumptions, uncertainties, and limitations of the methodology are discussed, and the need for future research is outlined.

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

A review of underwater acoustic systems and methods for locating objects lost at sea

NASA Technical Reports Server (NTRS)

Lovelady, R. W.; Ferguson, R. L.

1983-01-01

Information related to the location of objects lost at sea is presented. Acoustic devices attached to an object prior to being transported is recommended as a homing beacon. Minimum requirements and some environmental constraints are defined. Methods and procedures for search and recovery are also discussed. Both an interim system and a more advanced system are outlined. Controlled acoustic emission to enhance security is the theme followed.

The ecology of microorganisms in a small closed system: Potential benefits and problems for space station

NASA Technical Reports Server (NTRS)

Rodgers, E. B.

1986-01-01

The inevitble presence on the space station of microorganisms associated with crew members and their environment will have the potential for both benefits and a range of problems including illness and corrosion of materials. This report reviews the literature presenting information about microorganisms pertinent to Environmental Control and Life Support (ECLS) on the space station. The perspective of the report is ecological, viewing the space station as an ecosystem in which biological relationships are affected by factors such as zero gravity and by closure of a small volume of space. Potential sites and activities of microorganisms on the space station and their environmental limits, microbial standards for the space station, monitoring and control methods, effects of space factors on microorganisms, and extraterrestrial contamination are discussed.

A new compound control method for sine-on-random mixed vibration test

NASA Astrophysics Data System (ADS)

Zhang, Buyun; Wang, Ruochen; Zeng, Falin

2017-09-01

Vibration environmental test (VET) is one of the important and effective methods to provide supports for the strength design, reliability and durability test of mechanical products. A new separation control strategy was proposed to apply in multiple-input multiple-output (MIMO) sine on random (SOR) mixed mode vibration test, which is the advanced and intensive test type of VET. As the key problem of the strategy, correlation integral method was applied to separate the mixed signals which included random and sinusoidal components. The feedback control formula of MIMO linear random vibration system was systematically deduced in frequency domain, and Jacobi control algorithm was proposed in view of the elements, such as self-spectrum, coherence, and phase of power spectral density (PSD) matrix. Based on the excessive correction of excitation in sine vibration test, compression factor was introduced to reduce the excitation correction, avoiding the destruction to vibration table or other devices. The two methods were synthesized to be applied in MIMO SOR vibration test system. In the final, verification test system with the vibration of a cantilever beam as the control object was established to verify the reliability and effectiveness of the methods proposed in the paper. The test results show that the exceeding values can be controlled in the tolerance range of references accurately, and the method can supply theory and application supports for mechanical engineering.

A geographic analysis of individual and environmental risk factors for hypospadias births

PubMed Central

Winston, Jennifer J; Meyer, Robert E; Emch, Michael E

2014-01-01

Background Hypospadias is a relatively common birth defect affecting the male urinary tract. We explored the etiology of hypospadias by examining its spatial distribution in North Carolina and the spatial clustering of residuals from individual and environmental risk factors. Methods We used data collected by the North Carolina Birth Defects Monitoring Program from 2003-2005 to estimate local Moran's I statistics to identify geographic clustering of overall and severe hypospadias, using 995 overall cases and 16,013 controls. We conducted logistic regression and local Moran's I statistics on standardized residuals to consider the contribution of individual variables (maternal age, maternal race/ethnicity, maternal education, smoking, parity, and diabetes) and environmental variables (block group land cover) to this clustering. Results Local Moran's I statistics indicated significant clustering of overall and severe hypospadias in eastern central North Carolina. Spatial clustering of hypospadias persisted when controlling for individual factors, but diminished somewhat when controlling for environmental factors. In adjusted models, maternal residence in a block group with more than 5% crop cover was associated with overall hypospadias (OR = 1.22; 95% CI = 1.04 – 1.43); that is living in a block group with greater than 5% crop cover was associated with a 22% increase in the odds of having a baby with hypospadias. Land cover was not associated with severe hypospadias. Conclusions This study illustrates the potential contribution of mapping in generating hypotheses about disease etiology. Results suggest that environmental factors including proximity to agriculture may play some role in the spatial distribution of hypospadias. PMID:25196538

An engineering approach to modelling, decision support and control for sustainable systems.

PubMed

Day, W; Audsley, E; Frost, A R

2008-02-12

Engineering research and development contributes to the advance of sustainable agriculture both through innovative methods to manage and control processes, and through quantitative understanding of the operation of practical agricultural systems using decision models. This paper describes how an engineering approach, drawing on mathematical models of systems and processes, contributes new methods that support decision making at all levels from strategy and planning to tactics and real-time control. The ability to describe the system or process by a simple and robust mathematical model is critical, and the outputs range from guidance to policy makers on strategic decisions relating to land use, through intelligent decision support to farmers and on to real-time engineering control of specific processes. Precision in decision making leads to decreased use of inputs, less environmental emissions and enhanced profitability-all essential to sustainable systems.

Spatial association between dissection density and environmental factors over the entire conterminous United States

NASA Astrophysics Data System (ADS)

Luo, Wei; Jasiewicz, Jaroslaw; Stepinski, Tomasz; Wang, Jinfeng; Xu, Chengdong; Cang, Xuezhi

2016-01-01

Previous studies of land dissection density (D) often find contradictory results regarding factors controlling its spatial variation. We hypothesize that the dominant controlling factors (and the interactions between them) vary from region to region due to differences in each region's local characteristics and geologic history. We test this hypothesis by applying a geographical detector method to eight physiographic divisions of the conterminous United States and identify the dominant factor(s) in each. The geographical detector method computes the power of determinant (q) that quantitatively measures the affinity between the factor considered and D. Results show that the factor (or factor combination) with the largest q value is different for physiographic regions with different characteristics and geologic histories. For example, lithology dominates in mountainous regions, curvature dominates in plains, and glaciation dominates in previously glaciated areas. The geographical detector method offers an objective framework for revealing factors controlling Earth surface processes.

Assessing risks and preventing disease from environmental chemicals.

PubMed

Dunnette, D A

1989-01-01

In the last 25 years there has been considerable concern expressed about the extent to which chemical agents in the ambient and work environments are contributing to the causation of disease. This concern is a logical extension of our increased knowledge of the real and potential effects of environmental chemicals and the methodological difficulties in applying new knowledge that could help prevent environmentally induced disease. Chemical risk assessment offers an approach to estimating risks and involves consideration of relevant information including identification of chemical hazards, evaluation of the dose-response relationship, estimation of exposure and finally, risk characterization. Particularly significant uncertainties which are inherent in use of this and other risk models include animal-human and low dose-high dose extrapolation and estimation of exposure. Community public health risks from exposure to environmental chemicals appear to be small relative to other public health risks based on information related to cancer trends, dietary intake of synthetic chemicals, assessment data on substances such as DDT and "dioxin," public health effects of hazardous waste sites and contextual considerations. Because of inherent uncertainty in the chemical risk assessment process, however, we need to apply what methods are available in our efforts to prevent disease induced by environmental chemicals. There are a number of societal strategies which can contribute to overall reduction of risk from environmental chemicals. These include acquisition of information on environmental risk including toxicity, intensity and extensity of exposure, biological monitoring, disease surveillance, improvement in epidemiological methods, control of environmental chemical exposures, and dissemination of hazardous chemical information. Responsible environmental risk communication and information transfer appear to be among the most important of the available strategies for preventing disease induced by chemicals in the environment.

Space Environment Effects on Stability of Medications Flown on Space Shuttles and the International Space Station (ISS)

NASA Technical Reports Server (NTRS)

Daniels, Vernie; Du, Jianping; Crady, Camille; Satterfield, Rick; Putcha, Lakshmi

2007-01-01

The purpose is to assess physical and chemical degradation of select pharmaceutical formulations from the Shuttle and ISS medical kits. Eleven pharmaceuticals dispensed as different dosage forms were selected based on their physical / chemical characteristics and susceptibility to environmental factors such as, temperature, humidity and light sensitivity. When available, ground-controls of the study medications with matching brand and lot numbers were used for comparison. Samples retrieved from flight were stored along with their matching controls in a temperature and humidity controlled environmental chamber. Temperature, humidity, and radiation data from the Shuttle and ISS were retrieved from onboard HOBO U12 Temp/RH Data Loggers, and from passive dosimeters. Physical and chemical analyses of the pharmaceuticals were conducted using validated United States Pharmacopeia (USP) methods. Results indicated degradation of 6 of the 11 formulations returned from space flights. Four formulations, Amoxicillin / Clavulanate, promethazine, sulfamethoxazole / trimethoprim, and ciprofloxacin tablets depicted discoloration after flight. Chemical content analyses using High or Ultra Performance Liquid Chromatography (HPLC / UPLC) methods revealed that dosage forms of Amoxicillin / Clavulanate, promethazine, sulfamethoxazole / trimethoprim, lidocaine, ciprofloxacin and mupirocin contained less than 95% of manufacturer s labeled claim of active drug compound. Shuttle and ISS environments affect stability and shelf life of certain mediations flown on these missions. Data analysis is in progress to examine the effect of specific space flight environmental factors on pharmaceutical stability. The degradation profiles generated from ground studies in analog environments will be useful in establishing predictive shelf-life profiles for medications intended for use during long-term space exploration missions.

Technological and life cycle assessment of organics processing odour control technologies.

PubMed

Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

2015-09-15

As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. Copyright © 2015 Elsevier B.V. All rights reserved.

Mycobiome of the bat white nose syndrome affected caves and mines reveals diversity of fungi and local adaptation by the fungal pathogen Pseudogymnoascus (Geomyces) destructans.

PubMed

Zhang, Tao; Victor, Tanya R; Rajkumar, Sunanda S; Li, Xiaojiang; Okoniewski, Joseph C; Hicks, Alan C; Davis, April D; Broussard, Kelly; LaDeau, Shannon L; Chaturvedi, Sudha; Chaturvedi, Vishnu

2014-01-01

Current investigations of bat White Nose Syndrome (WNS) and the causative fungus Pseudogymnoascus (Geomyces) destructans (Pd) are intensely focused on the reasons for the appearance of the disease in the Northeast and its rapid spread in the US and Canada. Urgent steps are still needed for the mitigation or control of Pd to save bats. We hypothesized that a focus on fungal community would advance the understanding of ecology and ecosystem processes that are crucial in the disease transmission cycle. This study was conducted in 2010-2011 in New York and Vermont using 90 samples from four mines and two caves situated within the epicenter of WNS. We used culture-dependent (CD) and culture-independent (CI) methods to catalogue all fungi ('mycobiome'). CD methods included fungal isolations followed by phenotypic and molecular identifications. CI methods included amplification of DNA extracted from environmental samples with universal fungal primers followed by cloning and sequencing. CD methods yielded 675 fungal isolates and CI method yielded 594 fungal environmental nucleic acid sequences (FENAS). The core mycobiome of WNS comprised of 136 operational taxonomic units (OTUs) recovered in culture and 248 OTUs recovered in clone libraries. The fungal community was diverse across the sites, although a subgroup of dominant cosmopolitan fungi was present. The frequent recovery of Pd (18% of samples positive by culture) even in the presence of dominant, cosmopolitan fungal genera suggests some level of local adaptation in WNS-afflicted habitats, while the extensive distribution of Pd (48% of samples positive by real-time PCR) suggests an active reservoir of the pathogen at these sites. These findings underscore the need for integrated disease control measures that target both bats and Pd in the hibernacula for the control of WNS.

The Revised Perceived Environmental Control Measure: A Review and Analysis.

ERIC Educational Resources Information Center

Smith-Sebasto, N. J.

1992-01-01

A study reveals the need for extensive refinement of the Revised Perceived Environmental Control Measure purported in the past to be a reliable and valid instrument to measure the relationship between the psychological construct, "locus of control," and environmental action or environmentally responsible behavior. (MCO)

Family-Environmental Factors Associated with Attention Deficit Hyperactivity Disorder in Chinese Children: A Case-Control Study

PubMed Central

du Prel Carroll, Xianming; Yi, Honggang; Liang, Yuezhu; Pang, Ke; Leeper-Woodford, Sandra; Riccardi, Patrizia; Liang, Xianhong

2012-01-01

Background Attention deficit hyperactivity disorder (ADHD) is one of the most common psychiatric disorders, affecting an estimated 5 to 12% of school-aged children worldwide. From 15 to 19 million Chinese children suffer from ADHD. The aim of this study was to investigate the association between family-environmental factors and ADHD in a sample of Chinese children. Methods A pair-matched, case-control study was conducted with 161 ADHD children and 161 non-ADHD children of matching age and sex, all from 5–18 years of age. The ADHD subjects and the normal controls were all evaluated via structured diagnostic interviews. We examined the association between family-environmental factors and ADHD using the conditional multiple logistic regression with backward stepwise selection to predict the associated factors of ADHD. Results Having experienced emotional abuse and being a single child were both significant factors associated with children diagnosed with ADHD. ADHD subjects were more likely to have suffered from emotional abuse (OR = 11.09, 95% CI = 2.15–57.29, P = 0.004) and have been a single child in the family (OR = 6.32, 95% CI = 2.09–19.14, P = 0.001) when compared to normal controls. The results were not modified by other confounding factors. Conclusion Our findings provide evidence that family-environmental factors are associated with ADHD among children in China. These findings, if confirmed by future research, may help to decrease ADHD by increasing the awareness of the effects of childhood emotional abuse. PMID:23209774

Development of an inflow controlled environmental flow regime for a Norwegian river

NASA Astrophysics Data System (ADS)

Alfredsen, Knut; Harby, Atle; Linnansaari, Tommi; Ugedal, Ola

2010-05-01

For most regulated rivers in Norway the common environmental flow regime is static and shows very little variation over the year. Recent research indicate that flow regimes that follow the natural inflow variation can meet the ecological and social demands for water in a better way. The implementation of a variable environmental flow regime provides many challenges both related to defining flow for various species and user groups in the river, but also due to practical implementation, legislation and control. A inflow controlled flow regime is developed for a Norwegian river regulated for hydro power as a pilot study. The regime should meet ecological demands from Atlantic salmon and brown trout, recreational use of water and visual impression of the river. This should be achieved preferably without altering the energy production in the hydro power system. The flow regime is developed for wet, dry and normal discharge conditions based on unregulated inflow to the catchment. The development of the seasonal flow requirements for various targets identified is done using a modification of the Building Block Method. Several options are tested regarding the integration of the flow regime into the operational strategy of the hydropower plant, both using real time prognosis of inflow and combinations with historical data. An important topic in selecting the release strategy is how it meets current Norwegian legislation and how well future documentation and environmental control can be carried out. An evaluation protocol is also proposed for the flow regime to test if the ecological targets are met.

An Improved Method to Control the Critical Parameters of a Multivariable Control System

NASA Astrophysics Data System (ADS)

Subha Hency Jims, P.; Dharmalingam, S.; Wessley, G. Jims John

2017-10-01

The role of control systems is to cope with the process deficiencies and the undesirable effect of the external disturbances. Most of the multivariable processes are highly iterative and complex in nature. Aircraft systems, Modern Power Plants, Refineries, Robotic systems are few such complex systems that involve numerous critical parameters that need to be monitored and controlled. Control of these important parameters is not only tedious and cumbersome but also is crucial from environmental, safety and quality perspective. In this paper, one such multivariable system, namely, a utility boiler has been considered. A modern power plant is a complex arrangement of pipework and machineries with numerous interacting control loops and support systems. In this paper, the calculation of controller parameters based on classical tuning concepts has been presented. The controller parameters thus obtained and employed has controlled the critical parameters of a boiler during fuel switching disturbances. The proposed method can be applied to control the critical parameters like elevator, aileron, rudder, elevator trim rudder and aileron trim, flap control systems of aircraft systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, K.; Ewing, P.D.; Kercel, S.

This paper presents results to date of an NRC-sponsored confirmatory research program initiated at three national laboratories to address environmental compatibility/qualification concerns associated with the use of microprocessor-based safety-related instrumentation and control (I and C) systems in nuclear power plants. The research approach involved evaluating existing military and industrial guidance, identifying the most significant environmental stressors and, for advanced I and C systems in a nuclear power plant, investigating the likely failure modes--both at the integrated circuit and system level--for digital technologies under varying levels of environmental stress (such as smoke exposure and electromagnetic and radio-frequency interference). The insights gainedmore » from these studies are being used to recommend appropriate methods for qualifying safety-related digital equipment in nuclear power plants.« less

Eye-based Direct Interaction for Environmental Control in Heterogeneous Smart Environments

NASA Astrophysics Data System (ADS)

Corno, Fulvio; Gale, Alastair; Majaranta, Päivi; Räihä, Kari-Jouko

environmental control is the control, operation, and monitoring of an environment via intermediary technology such as a computer. Typically this means control of a domestic home.Within the scope of COGAIN, this environmental control concerns the control of the personal environment of a person (with or without a disability). This defines environmental control as the control of a home or domestic setting and those objects that are within that setting. Thus, we may say that environmental control systems enable anyone to operate a wide range of domestic appliances and other vital functions in the home by remote control. In recent years the problem of self-sufficiency for older people and people with a disability has attracted increasing attention and resources. The search for new solutions that can guarantee greater autonomy and a better quality of life has begun to exploit easily available state-of-the-art technology. Personal environmental control can be considered to be a comprehensive and effective aid, adaptable to the functional possibilities of the user and to their desired actions.

Multi-Scale Experiments to Evaluate Mobility Control Methods for Enhancing the Sweep Efficiency of Injected Subsurface Remediation Amendments

DTIC Science & Technology

2010-08-01

petroleum industry. Moreover, heterogeneity control strategies can be applied to improve the efficiency of a variety of in situ remediation technologies...conditions that differ significantly from those found in environmental systems . Therefore many of the design criteria used by the petroleum industry for...were helpful in constructing numerical models in up-scaled systems (2-D tanks). The UTCHEM model was able to successfully simulate 2-D experimental

Condenser microbiofouling control handbook. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rice, J.K.; Garey, J.; Mussalli, Y.G.

1993-10-01

This handbook is a unified source of information to support the decisions that must be made to control microbiofouling. It is organized to help power plant engineers and operators (1) understand the causes of biofouling and how this knowledge can be used to develop an effective cleaning process, (2) move through the regulatory maze to find the regulations applicable to their own plant, (3) monitor biofouling, including on-line, off-line, direct, and indirect methods, (4) calculate the economic penalties for biofouling, (5) evaluate various chemical control methods in terms of system design and operation, biocontrol agents, specific restrictive environmental regulations, chemicalmore » application methods, and safety and exposure for workers, (6) evaluate mechanical cleaning methods, both on-line and off-line. Worksheets and examples are provided in many sections to guide operators to a more solid understanding of their problems and possible solutions. The handbook contains 46 figures, 28 tables, several case studies, and a complete index to aid the user in selecting appropriate sections of the handbook to read or review.« less

A technical, economic, and environmental assessment of amine-based CO2 capture technology for power plant greenhouse gas control.

PubMed

Rao, Anand B; Rubin, Edward S

2002-10-15

Capture and sequestration of CO2 from fossil fuel power plants is gaining widespread interest as a potential method of controlling greenhouse gas emissions. Performance and cost models of an amine (MEA)-based CO2 absorption system for postcombustion flue gas applications have been developed and integrated with an existing power plant modeling framework that includes multipollutant control technologies for other regulated emissions. The integrated model has been applied to study the feasibility and cost of carbon capture and sequestration at both new and existing coal-burning power plants. The cost of carbon avoidance was shown to depend strongly on assumptions about the reference plant design, details of the CO2 capture system design, interactions with other pollution control systems, and method of CO2 storage. The CO2 avoidance cost for retrofit systems was found to be generally higher than for new plants, mainly because of the higher energy penalty resulting from less efficient heat integration as well as site-specific difficulties typically encountered in retrofit applications. For all cases, a small reduction in CO2 capture cost was afforded by the SO2 emission trading credits generated by amine-based capture systems. Efforts are underway to model a broader suite of carbon capture and sequestration technologies for more comprehensive assessments in the context of multipollutant environmental management.

Twin methodology in epigenetic studies.

PubMed

Tan, Qihua; Christiansen, Lene; von Bornemann Hjelmborg, Jacob; Christensen, Kaare

2015-01-01

Since the final decades of the last century, twin studies have made a remarkable contribution to the genetics of human complex traits and diseases. With the recent rapid development in modern biotechnology of high-throughput genetic and genomic analyses, twin modelling is expanding from analysis of diseases to molecular phenotypes in functional genomics especially in epigenetics, a thriving field of research that concerns the environmental regulation of gene expression through DNA methylation, histone modification, microRNA and long non-coding RNA expression, etc. The application of the twin method to molecular phenotypes offers new opportunities to study the genetic (nature) and environmental (nurture) contributions to epigenetic regulation of gene activity during developmental, ageing and disease processes. Besides the classical twin model, the case co-twin design using identical twins discordant for a trait or disease is becoming a popular and powerful design for epigenome-wide association study in linking environmental exposure to differential epigenetic regulation and to disease status while controlling for individual genetic make-up. It can be expected that novel uses of twin methods in epigenetic studies are going to help with efficiently unravelling the genetic and environmental basis of epigenomics in human complex diseases. © 2015. Published by The Company of Biologists Ltd.

Genes, Environments, Personality, and Successful Aging: Toward a Comprehensive Developmental Model in Later Life

PubMed Central

Krueger, Robert F.; South, Susan C.; Gruenewald, Tara L.; Seeman, Teresa E.; Roberts, Brent W.

2012-01-01

Background. Outcomes in aging and health research, such as longevity, can be conceptualized as reflecting both genetic and environmental (nongenetic) effects. Parsing genetic and environmental influences can be challenging, particularly when taking a life span perspective, but an understanding of how genetic variants and environments relate to successful aging is critical to public health and intervention efforts. Methods. We review the literature, and survey promising methods, to understand this interplay. We also propose the investigation of personality as a nexus connecting genetics, environments, and health outcomes. Results. Personality traits may reflect psychological mechanisms by which underlying etiologic (genetic and environmental) effects predispose individuals to broad propensities to engage in (un)healthy patterns of behavior across the life span. In terms of methodology, traditional behavior genetic approaches have been used profitably to understand how genetic factors and environments relate to health and personality in somewhat separate literatures; we discuss how other behavior genetic approaches can help connect these literatures and provide new insights. Conclusions. Co-twin control designs can be employed to help determine causality via a closer approximation of the idealized counterfactual design. Gene-by-environment interaction (G × E) designs can be employed to understand how individual difference characteristics, such as personality, might moderate genetic and environmental influences on successful aging outcomes. Application of such methods can clarify the interplay of genes, environments, personality, and successful aging. PMID:22454369

Detection and quantification of infectious avian influenza A (H5N1) virus in environmental water by using real-time reverse transcription-PCR.

PubMed

Dovas, C I; Papanastassopoulou, M; Georgiadis, M P; Chatzinasiou, E; Maliogka, V I; Georgiades, G K

2010-04-01

Routes of avian influenza virus (AIV) dispersal among aquatic birds involve direct (bird-to-bird) and indirect (waterborne) transmission. The environmental persistence of H5N1 virus in natural water reservoirs can be assessed by isolation of virus in embryonated chicken eggs. Here we describe development and evaluation of a real-time quantitative reverse transcription (RT)-PCR (qRT-PCR) method for detection of H5N1 AIV in environmental water. This method is based on adsorption of virus particles to formalin-fixed erythrocytes, followed by qRT-PCR detection. The numbers of hemagglutinin RNA copies from H5N1 highly pathogenic AIV particles adsorbed to erythrocytes detected correlated highly with the infectious doses of the virus that were determined for three different types of artificially inoculated environmental water over a 17-day incubation period. The advantages of this method include detection and quantification of infectious H5N1 AIVs with a high level of sensitivity, a wide dynamic range, and reproducibility, as well as increased biosecurity. The lowest concentration of H5N1 virus that could be reproducibly detected was 0.91 50% egg infective dose per ml. In addition, a virus with high virion stability (Tobacco mosaic virus) was used as an internal control to accurately monitor the efficiency of RNA purification, cDNA synthesis, and PCR amplification for each individual sample. This detection system could be useful for rapid high-throughput monitoring for the presence of H5N1 AIVs in environmental water and in studies designed to explore the viability and epidemiology of these viruses in different waterfowl ecosystems. The proposed method may also be adapted for detection of other AIVs and for assessment of their prevalence and distribution in environmental reservoirs.

Optimal groundwater security management policies by control of inexact health risks under dual uncertainty in slope factors.

PubMed

Lu, Hongwei; Li, Jing; Ren, Lixia; Chen, Yizhong

2018-05-01

Groundwater remediation is a complicated system with time-consuming and costly challenges, which should be carefully controlled by appropriate groundwater management. This study develops an integrated optimization method for groundwater remediation management regarding cost, contamination distribution and health risk under multiple uncertainties. The integration of health risk into groundwater remediation optimization management is capable of not only adequately considering the influence of health risk on optimal remediation strategies, but also simultaneously completing remediation optimization design and risk assessment. A fuzzy chance-constrained programming approach is presented to handle multiple uncertain properties in the process of health risk assessment. The capabilities and effectiveness of the developed method are illustrated through an application of a naphthalene contaminated case in Anhui, China. Results indicate that (a) the pump-and-treat remediation system leads to a low naphthalene contamination but high remediation cost for a short-time remediation, and natural attenuation significantly affects naphthalene removal from groundwater for a long-time remediation; (b) the weighting coefficients have significant influences on the remediation cost and the performances both for naphthalene concentrations and health risks; (c) an increased level of slope factor (sf) for naphthalene corresponds to more optimal strategies characterized by higher environmental benefits and lower economic sacrifice. The developed method could be simultaneously beneficial for public health and environmental protection. Decision makers could obtain the most appropriate remediation strategies according to their specific requirements with high flexibility of economic, environmental, and risk concerns. Copyright © 2018 Elsevier Ltd. All rights reserved.

Environmental Pollution Prevention, Control and Abatement

DTIC Science & Technology

1977-08-30

AD-A271 117 fDATE August 30. 1977 ASD (ORA&L) Department of Defense Instruction SUBJECT: Environmental Pollution Prevention, Control and Abatement...Ensure that any funds appropriated and apportioned for the prevention, control, and abatement of environmental pollution are not used for any other...77 References (a) Executive Order 11752, "Prevention, Control, and Abatement of Environmental Pollution at Federal Facilities," December 19, 1973 (b

Environmental factors associated with disordered weight-control behaviours among youth: a systematic review.

PubMed

Wang, Monica L; Peterson, Karen E; McCormick, Marie C; Austin, S Bryn

2014-07-01

Environmental factors may be very important in the development of disordered weight-control behaviours (DWCB) among youth, yet no study to date has conducted a review that synthesizes these findings. The purpose of the present study was to systematically review existing literature on environmental influences on DWCB among youth and to identify conceptual and methodological gaps in the literature. Systematic review. Studies were identified through a systematic search using PubMed, PsycINFO, Google Scholar and secondary references. Inclusion criteria included observational studies published in peer-reviewed journals from 1994 to 2012 that examined environmental exposure(s) associated with DWCB among youth. Ninety-three studies, the majority of which utilized a cross-sectional design (75 %; n 70), were identified. Longitudinal studies' follow-up time ranged from 8 months to 10 years. Parental, peer and media influences have been extensively studied as factors associated with DWCB among youth. Fewer studies have examined behavioural settings (i.e. homes, schools, neighbourhoods) or sectors of influence other than the media on DWCB. No studies utilized multilevel methods to parse out environmental influences on DWCB. Most studies (69 %, n 64) did not explicitly utilize a theory or model to guide the research. Findings indicate that exploring a wider range of environmental influences on DWCB, specifically behavioural settings and sectors of influence, using diverse study samples and multilevel methodology is needed to advance the field and to inform the design of comprehensive prevention programmes that target DWCB and other weight-related behaviours.

MlAB10: a Triticum turgidum subsp. dicoccoides derived powdery mildew resistance gene identified in common wheat

USDA-ARS?s Scientific Manuscript database

Powdery mildew is an economically important disease in wheat growing areas with a cool maritime environment. Host genetic resistance is the most economical, consistent, and environmentally sound method of control. NC97BGTAB10 is a germplasm line containing powdery mildew resistance introgressed fr...

Use of saltcedar and Utah juniper as fillers in wood–plastic composites

Treesearch

Craig Clemons; Nicole Stark

2007-01-01

Invasive and small-diameter species have become more prevalent, creating numerous environmental and ecological problems. One potential method to control and eliminate invasive species and thereby promote natural rangeland restoration is developing new, value-added uses for them. Saltcedar (Tamarisk ramosissima) and Utah juniper (Juniperus osteosperma) were investigated...

Postulation and mapping of seedling stripe rust resistance genes in Ethiopian bread wheat cultivars

USDA-ARS?s Scientific Manuscript database

Stripe rust caused by Puccinia striiformis f. sp. tritici (Pst), is one of the most important diseases of wheat worldwide. In Ethiopia, grain yield loss in wheat cultivars ranges from 30 to 69%. The use of resistant cultivars is the most economical and environmentally friendly method of controlling ...

Cumulative impacts: current research and current opinions at PSW

Treesearch

R. M. Rice

1987-01-01

Consideration of cumulative watershed effects (CWEs) has both political and physical aspects. Regardless of the practical usefulness of present methods of dealing with CWEs, the legal requirement to address them remains. Management of federal land is regulated by the National Environmental Policy Act (NEPA) and the Federal Water Pollution Control Act of 1972. The...

AERIS--applications for the environment : real-time information synthesis state-of-the-practice support : state-of-the-practice assessment of technology to enable environmental data acquisition.

DOT National Transportation Integrated Search

2011-06-21

In this report, vehicle-based and infrastructure-based data acquisition technologies are assessed. Vehicle-based technologies include methods for accessing the Controller Area Network (CAN) Bus on heavy vehicles, the On-Board Diagnostic (OBD II) on s...

DEVELOPMENT OF VIRAL INTERNAL CONTROLS FOR THE ASSESSMENT OF INHIBITOR REMOVAL FROM ENVIRONMENTAL WATER SAMPLES.

EPA Science Inventory

The presence of human enteric viruses in drinking water is of public health concern. It is therefore important to be able to reliably detect these viruses in contaminating water sources. Cell culture methods are time consuming and also not all enteric viruses can currently be p...

Restoring native riparian vegetation

Treesearch

Debbie Hughes

1996-01-01

In the lower Pecos Basin, an unusual coalition of conservationists, agriculture producers, business owners, and state agencies have joined together to save what is left of the once-naturally diverse Pecos River ecosystem. This organization is going to show a state-of-the-art, economical, effective, efficient, and environmentally safe method to control salt cedar and...

Models of Fate and Transport of Pollutants in Surface Waters

ERIC Educational Resources Information Center

Okome, Gloria Eloho

2013-01-01

There is the need to answer very crucial questions of "what happens to pollutants in surface waters?" This question must be answered to determine the factors controlling fate and transport of chemicals and their evolutionary state in surface waters. Monitoring and experimental methods are used in establishing the environmental states.…

40 CFR 266.105 - Standards to control particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... matter. 266.105 Section 266.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... prescribed in 40 CFR part 60, appendix A, methods 1 through 5, and appendix IX of this part. (b) An owner or operator meeting the requirements of § 266.109(b) for the low risk waste exemption is exempt from the...

METHOD-SPECIFIC PRECISION AND BIAS RELATIONSHIPS DEVELOPED FROM DATA SUBMITTED DURING USEPA DRINKING WATER LABORATORY PERFORMANCE EVALUATION STUDIES

EPA Science Inventory

This paper documents the process used by the United States Environmental Protection Agency (USEPA) to estimate the mean and standard deviation of data reported by in-control drinking water laboratories during Water Supply (WS) studies. This process is then applied to the data re...

METHOD-SPECIFIC PRECISION AND BIAS RELATIONSHIPS DEVELOPED FROM DATA SUBMITTED DURING USEPA WASTEWATER LABORATORY PERFORMANCE EVALUATION STUDIES

EPA Science Inventory

This paper documents the process used by the United States Environmental Protection Agency (USEPA) to estimate the mean and standard deviation of data reported by in-control wastewater laboratories during Water Pollution (WP) studies. This process is then applied to the data rep...

Context Therapy: A New Intervention Approach for Children with Cerebral Palsy

ERIC Educational Resources Information Center

Darrah, Johanna; Law, Mary C.; Pollock, Nancy; Wilson, Brenda; Russell, Dianne J.; Walter, Stephen D.; Rosenbaum, Peter; Galuppi, Barb

2011-01-01

Aim: To describe the development of context therapy, a new intervention approach designed for a randomized controlled trial. Method: Therapists were trained to change task and environmental factors to achieve parent-identified functional goals for children with cerebral palsy. Therapists did not provide any remediation strategies to change the…

Stressor-response modeling using the 2D water quality model and regression trees to predict chlorophyll-a in a reservoir system

USDA-ARS?s Scientific Manuscript database

In order to control algal blooms, stressor-response relationships between water quality metrics, environmental variables, and algal growth should be understood and modeled. Machine-learning methods were suggested to express stressor-response relationships found by application of mechanistic water qu...

36 CFR 1284.30 - Does NARA lend documents to other institutions for exhibit purposes?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Does NARA lend documents to other institutions for exhibit purposes? 1284.30 Section 1284.30 Parks, Forests, and Public Property... security, fire protection, environmental controls, packing and shipping, exhibit methods, and insurance...

Simulation of water environmental capacity and pollution load reduction using QUAL2K for water environmental management.

PubMed

Zhang, Ruibin; Qian, Xin; Yuan, Xingcheng; Ye, Rui; Xia, Bisheng; Wang, Yulei

2012-12-07

In recent years, water quality degradation associated with rapid socio-economic development in the Taihu Lake Basin, China, has attracted increasing attention from both the public and the Chinese government. The primary sources of pollution in Taihu Lake are its inflow rivers and their tributaries. Effective water environmental management strategies need to be implemented in these rivers to improve the water quality of Taihu Lake, and to ensure sustainable development in the region. The aim of this study was to provide a basis for water environmental management decision-making. In this study, the QUAL2K model for river and stream water quality was applied to predict the water quality and environmental capacity of the Hongqi River, which is a polluted tributary in the Taihu Lake Basin. The model parameters were calibrated by trial and error until the simulated results agreed well with the observed data. The calibrated QUAL2K model was used to calculate the water environmental capacity of the Hongqi River, and the water environmental capacities of COD(Cr) NH(3)-N, TN, and TP were 17.51 t, 1.52 t, 2.74 t and 0.37 t, respectively. The results showed that the NH(3)-N, TN, and TP pollution loads of the studied river need to be reduced by 50.96%, 44.11%, and 22.92%, respectively to satisfy the water quality objectives. Thus, additional water pollution control measures are needed to control and reduce the pollution loads in the Hongqi River watershed. The method applied in this study should provide a basis for water environmental management decision-making.

Systematic evaluation of environmental factors: persistent pollutants and nutrients correlated with serum lipid levels

PubMed Central

Patel, Chirag J; Cullen, Mark R; Ioannidis, John PA; Butte, Atul J

2012-01-01

Background Both genetic and environmental factors contribute to triglyceride, low-density lipoprotein-cholesterol (LDL-C), and high-density lipoprotein-cholesterol (HDL-C) levels. Although genome-wide association studies are currently testing the genetic factors systematically, testing and reporting one or a few factors at a time can lead to fragmented literature for environmental chemical factors. We screened for correlation between environmental factors and lipid levels, utilizing four independent surveys with information on 188 environmental factors from the Centers of Disease Control, National Health and Nutrition Examination Survey, collected between 1999 and 2006. Methods We used linear regression to correlate each environmental chemical factor to triglycerides, LDL-C and HDL-C adjusting for age, age2, sex, ethnicity, socio-economic status and body mass index. Final estimates were adjusted for waist circumference, diabetes status, blood pressure and survey. Multiple comparisons were controlled for by estimating the false discovery rate and significant findings were tentatively validated in an independent survey. Results We identified and validated 29, 9 and 17 environmental factors correlated with triglycerides, LDL-C and HDL-C levels, respectively. Findings include hydrocarbons and nicotine associated with lower HDL-C and vitamin E (γ-tocopherol) associated with unfavourable lipid levels. Higher triglycerides and lower HDL-C were correlated with higher levels of fat-soluble contaminants (e.g. polychlorinated biphenyls and dibenzofurans). Nutrients and vitamin markers (e.g. vitamins B, D and carotenes), were associated with favourable triglyceride and HDL-C levels. Conclusions Our systematic association study has enabled us to postulate about broad environmental correlation to lipid levels. Although subject to confounding and reverse causality bias, these findings merit evaluation in additional cohorts. PMID:22421054

Simulation of Water Environmental Capacity and Pollution Load Reduction Using QUAL2K for Water Environmental Management

PubMed Central

Zhang, Ruibin; Qian, Xin; Yuan, Xingcheng; Ye, Rui; Xia, Bisheng; Wang, Yulei

2012-01-01

In recent years, water quality degradation associated with rapid socio-economic development in the Taihu Lake Basin, China, has attracted increasing attention from both the public and the Chinese government. The primary sources of pollution in Taihu Lake are its inflow rivers and their tributaries. Effective water environmental management strategies need to be implemented in these rivers to improve the water quality of Taihu Lake, and to ensure sustainable development in the region. The aim of this study was to provide a basis for water environmental management decision-making. In this study, the QUAL2K model for river and stream water quality was applied to predict the water quality and environmental capacity of the Hongqi River, which is a polluted tributary in the Taihu Lake Basin. The model parameters were calibrated by trial and error until the simulated results agreed well with the observed data. The calibrated QUAL2K model was used to calculate the water environmental capacity of the Hongqi River, and the water environmental capacities of CODCr NH3-N, TN, and TP were 17.51 t, 1.52 t, 2.74 t and 0.37 t, respectively. The results showed that the NH3-N, TN, and TP pollution loads of the studied river need to be reduced by 50.96%, 44.11%, and 22.92%, respectively to satisfy the water quality objectives. Thus, additional water pollution control measures are needed to control and reduce the pollution loads in the Hongqi River watershed. The method applied in this study should provide a basis for water environmental management decision-making. PMID:23222206

Significance of Viable but Nonculturable Escherichia coli: Induction, Detection, and Control.

PubMed

Ding, Tian; Suo, Yuanjie; Xiang, Qisen; Zhao, Xihong; Chen, Shiguo; Ye, Xingqian; Liu, Donghong

2017-03-28

Diseases caused by foodborne or waterborne pathogens are emerging. Many pathogens can enter into the viable but nonculturable (VBNC) state, which is a survival strategy when exposed to harsh environmental stresses. Pathogens in the VBNC state have the ability to evade conventional microbiological detection methods, posing a significant and potential health risk. Therefore, controlling VBNC bacteria in food processing and the environment is of great importance. As the typical one of the gram-negatives, Escherichia coli ( E. coli ) is a widespread foodborne and waterborne pathogenic bacterium and is able to enter into a VBNC state in extreme conditions (similar to the other gram-negative bacteria), including inducing factors and resuscitation stimulus. VBNC E. coli has the ability to recover both culturability and pathogenicity, which may bring potential health risk. This review describes the concrete factors (nonthermal treatment, chemical agents, and environmental factors) that induce E. coli into the VBNC state, the condition or stimulus required for resuscitation of VBNC E. coli , and the methods for detecting VBNC E. coli . Furthermore, the mechanism of genes and proteins involved in the VBNC E. coli is also discussed in this review.

Environmental Validation of Legionella Control in a VHA Facility Water System.

PubMed

Jinadatha, Chetan; Stock, Eileen M; Miller, Steve E; McCoy, William F

2018-03-01

OBJECTIVES We conducted this study to determine what sample volume, concentration, and limit of detection (LOD) are adequate for environmental validation of Legionella control. We also sought to determine whether time required to obtain culture results can be reduced compared to spread-plate culture method. We also assessed whether polymerase chain reaction (PCR) and in-field total heterotrophic aerobic bacteria (THAB) counts are reliable indicators of Legionella in water samples from buildings. DESIGN Comparative Legionella screening and diagnostics study for environmental validation of a healthcare building water system. SETTING Veterans Health Administration (VHA) facility water system in central Texas. METHODS We analyzed 50 water samples (26 hot, 24 cold) from 40 sinks and 10 showers using spread-plate cultures (International Standards Organization [ISO] 11731) on samples shipped overnight to the analytical lab. In-field, on-site cultures were obtained using the PVT (Phigenics Validation Test) culture dipslide-format sampler. A PCR assay for genus-level Legionella was performed on every sample. RESULTS No practical differences regardless of sample volume filtered were observed. Larger sample volumes yielded more detections of Legionella. No statistically significant differences at the 1 colony-forming unit (CFU)/mL or 10 CFU/mL LOD were observed. Approximately 75% less time was required when cultures were started in the field. The PCR results provided an early warning, which was confirmed by spread-plate cultures. The THAB results did not correlate with Legionella status. CONCLUSIONS For environmental validation at this facility, we confirmed that (1) 100 mL sample volumes were adequate, (2) 10× concentrations were adequate, (3) 10 CFU/mL LOD was adequate, (4) in-field cultures reliably reduced time to get results by 75%, (5) PCR provided a reliable early warning, and (6) THAB was not predictive of Legionella results. Infect Control Hosp Epidemiol 2018;39:259-266.

A system approach for reducing the environmental impact of manufacturing and sustainability improvement of nano-scale manufacturing

NASA Astrophysics Data System (ADS)

Yuan, Yingchun

This dissertation develops an effective and economical system approach to reduce the environmental impact of manufacturing. The system approach is developed by using a process-based holistic method for upstream analysis and source reduction of the environmental impact of manufacturing. The system approach developed consists of three components of a manufacturing system: technology, energy and material, and is useful for sustainable manufacturing as it establishes a clear link between manufacturing system components and its overall sustainability performance, and provides a framework for environmental impact reductions. In this dissertation, the system approach developed is applied for environmental impact reduction of a semiconductor nano-scale manufacturing system, with three case scenarios analyzed in depth on manufacturing process improvement, clean energy supply, and toxic chemical material selection. The analysis on manufacturing process improvement is conducted on Atomic Layer Deposition of Al2O3 dielectric gate on semiconductor microelectronics devices. Sustainability performance and scale-up impact of the ALD technology in terms of environmental emissions, energy consumption, nano-waste generation and manufacturing productivity are systematically investigated and the ways to improve the sustainability of the ALD technology are successfully developed. The clean energy supply is studied using solar photovoltaic, wind, and fuel cells systems for electricity generation. Environmental savings from each clean energy supply over grid power are quantitatively analyzed, and costs for greenhouse gas reductions on each clean energy supply are comparatively studied. For toxic chemical material selection, an innovative schematic method is developed as a visual decision tool for characterizing and benchmarking the human health impact of toxic chemicals, with a case study conducted on six chemicals commonly used as solvents in semiconductor manufacturing. Reliability of the schematic method is validated by comparing its benchmark results on 104 chemicals with that from the conventional Human Toxicity Potential (HTP) method. This dissertation concludes with discussions on environmental impact assessment of nanotechnologies and sustainability management of nano-particles. As nano-manufacturing is emerging for wide industrial applications, improvement and expansion of the system approach would be valuable for use in the environmental management of nano-manufacturing and in the risk control of nano-particles in the interests of public health and the environment.

[Earthquakes--a historical review, environmental and health effects, and health care measures].

PubMed

Nola, Iskra Alexandra; Doko Jelinić, Jagoda; Žuškin, Eugenija; Kratohvil, Mladen

2013-06-01

Earthquakes are natural disasters that can occur at any time, regardless of the location. Their frequency is higher in the Circum-Pacific and Mediterranean/Trans-Asian seismic belt. A number of sophisticated methods define their magnitude using the Richter scale and intensity using the Mercani-Cancani-Sieberg scale. Recorded data show a number of devastating earthquakes that have killed many people and changed the environment dramatically. Croatia is located in a seismically active area, which has endured a series of historical earthquakes, among which several occurred in the Zagreb area. The consequences of an earthquake depend mostly on the population density and seismic resistance of buildings in the affected area. Environmental consequences often include air, water, and soil pollution. The effects of this kind of pollution can have long-term health effects. The most dramatic health consequences result from the demolition of buildings. Therefore, quick and efficient aid depends on well-organized health professionals as well as on the readiness of the civil defence, fire department, and Mountain Rescue Service members. Good coordination among these services can save many lives Public health interventions must include effective control measures in the environment as secondary prevention methods for health problems caused by unfavourable environmental factors. The identification and control of long-term hazards can reduce chronic health effects. The reduction of earthquake-induced damages includes setting priorities in building seismically safe buildings.

Environmental Volunteering and Health Outcomes over a 20-Year Period

PubMed Central

Pillemer, Karl; Fuller-Rowell, Thomas E.; Reid, M. C.; Wells, Nancy M.

2010-01-01

Purpose: This study tested the hypothesis that volunteering in environmental organizations in midlife is associated with greater physical activity and improved mental and physical health over a 20-year period.  Design and Methods: The study used data from two waves (1974 and 1994) of the Alameda County Study, a longitudinal study of health and mortality that has followed a cohort of 6,928 adults since 1965. Using logistic and multiple regression models, we examined the prospective association between environmental and other volunteerism and three outcomes (physical activity, self-reported health, and depression), with 1974 volunteerism predicting 1994 outcomes, controlling for a number of relevant covariates.  Results: Midlife environmental volunteering was significantly associated with physical activity, self-reported health, and depressive symptoms.  Implications: This population-based study offers the first epidemiological evidence for a significant positive relationship between environmental volunteering and health and well-being outcomes. Further research, including intervention studies, is needed to confirm and shed additional light on these initial findings. PMID:20172902

Study on Noise Prediction Model and Control Schemes for Substation

PubMed Central

Gao, Yang; Liu, Songtao

2014-01-01

With the government's emphasis on environmental issues of power transmission and transformation project, noise pollution has become a prominent problem now. The noise from the working transformer, reactor, and other electrical equipment in the substation will bring negative effect to the ambient environment. This paper focuses on using acoustic software for the simulation and calculation method to control substation noise. According to the characteristics of the substation noise and the techniques of noise reduction, a substation's acoustic field model was established with the SoundPLAN software to predict the scope of substation noise. On this basis, 4 reasonable noise control schemes were advanced to provide some helpful references for noise control during the new substation's design and construction process. And the feasibility and application effect of these control schemes can be verified by using the method of simulation modeling. The simulation results show that the substation always has the problem of excessive noise at boundary under the conventional measures. The excess noise can be efficiently reduced by taking the corresponding noise reduction methods. PMID:24672356

Effectiveness of environmental control measures to decrease the risk of invasive aspergillosis in acute leukaemia patients during hospital building work.

PubMed

Combariza, J F; Toro, L F; Orozco, J J

2017-08-01

Invasive aspergillosis (IA) is a significant problem in acute leukaemia patients. Construction work near hospital wards caring for immunocompromised patients is one of the main risk factors for developing invasive pulmonary aspergillosis (IPA). To assess the impact of environmental control measures used during hospital construction for the prevention of IA in acute leukaemia patients. A retrospective cohort study was developed to evaluate the IA incidence in acute leukaemia patients with different environmental control measures employed during hospital construction. We used European Organisation for the Research and Treatment of Cancer (EORTC) criterial diagnosis parameters for definition of IA. A total of 175 episodes of inpatient care were evaluated, 62 of which did not have any environmental control measures (when an outbreak occurred), and 113 that were subject to environmental control measures directed to preventing IA. The study showed an IA incidence of 25.8% for the group without environmental control measures vs 12.4% for those who did receive environmental control measures (P=0.024). The relative risk for IA was 0.595 (95% confidence interval: 0.394-0.897) for the group with environmental control measures. The current study suggests that the implementation of environmental control measures during a hospital construction has a positive impact for prevention of IA in patients hospitalized with acute leukaemia. Copyright © 2017 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This environmental protection seminar was divided into seven sessions: (1) general environmental protection, (2) air and water pollution control, (3) spill control and countermeasures, (4) toxic materials control, (5) hazardous materials control, (6) environmental protection projects, and (7) cost benefit analysis. Separate abstracts have been prepared for the 41 papers presented therein. (ACR)

Bonneville - Hood River Vegetation Management Environmental Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

1998-08-01

To maintain the reliability of its electrical system, BPA, in cooperation with the U.S. Forest Service, needs to expand the range of vegetation management options used to clear unwanted vegetation on about 20 miles of BPA transmission line right-of-way between Bonneville Dam and Hood River; Oregon, within the Columbia Gorge National Scenic Area (NSA). We propose to continue controlling undesirable vegetation using a program of Integrated Vegetation Management (IVM) which includes manual, biological and chemical treatment methods. BPA has prepared an Environmental Assessment (EA) (DOE/EA-1257) evaluating the proposed project. Based on the analysis in the EA, BPA has determined thatmore » the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement (EIS) is not required and BPA is issuing this FONSI.« less

Development of a model to assess environmental performance, concerning HSE-MS principles.

PubMed

Abbaspour, M; Hosseinzadeh Lotfi, F; Karbassi, A R; Roayaei, E; Nikoomaram, H

2010-06-01

The main objective of the present study was to develop a valid and appropriate model to evaluate companies' efficiency and environmental performance, concerning health, safety, and environmental management system principles. The proposed model overcomes the shortcomings of the previous models developed in this area. This model has been designed on the basis of a mathematical method known as Data Envelopment Analysis (DEA). In order to differentiate high-performing companies from weak ones, one of DEA nonradial models named as enhanced Russell graph efficiency measure has been applied. Since some of the environmental performance indicators cannot be controlled by companies' managers, it was necessary to develop the model in a way that it could be applied when discretionary and/or nondiscretionary factors were involved. The model, then, has been modified on a real case that comprised 12 oil and gas general contractors. The results showed the relative efficiency, inefficiency sources, and the rank of contractors.

40 CFR 46.110 - Objectives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... professional educational opportunities in fields related to pollution control and environmental protection... agencies responsible for environmental pollution control and environmental protection. ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE FELLOWSHIPS...

40 CFR 46.110 - Objectives.

Code of Federal Regulations, 2013 CFR

2013-07-01

... professional educational opportunities in fields related to pollution control and environmental protection... agencies responsible for environmental pollution control and environmental protection. ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE FELLOWSHIPS...

40 CFR 46.110 - Objectives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... professional educational opportunities in fields related to pollution control and environmental protection... agencies responsible for environmental pollution control and environmental protection. ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE FELLOWSHIPS...

40 CFR 46.110 - Objectives.

Code of Federal Regulations, 2014 CFR

2014-07-01

... professional educational opportunities in fields related to pollution control and environmental protection... agencies responsible for environmental pollution control and environmental protection. ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE FELLOWSHIPS...

40 CFR 46.110 - Objectives.

Code of Federal Regulations, 2012 CFR

2012-07-01

... professional educational opportunities in fields related to pollution control and environmental protection... agencies responsible for environmental pollution control and environmental protection. ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE FELLOWSHIPS...

Fabrication of Controllable Pore and Particle Size of Mesoporous Silica Nanoparticles via a Liquid-phase Synthesis Method and Its Absorption Characteristics

NASA Astrophysics Data System (ADS)

Nandiyanto, Asep Bayu Dani; Iskandar, Ferry; Okuyama, Kikuo

2011-12-01

Monodisperse spherical mesoporous silica nanoparticles were successfully synthesized using a liquid-phase synthesis method. The result showed particles with controllable pore size from several to tens nanometers with outer diameter of several tens nanometers. The ability in the control of pore size and outer diameter was altered by adjusting the precursor solution ratios. In addition, we have conducted the adsorption ability of the prepared particles. The result showed that large organic molecules were well-absorbed to the prepared silica porous particles, in which this result was not obtained when using commercial dense silica particle and/or hollow silica particle. With this result, the prepared mesoporous silica particles may be used efficiently in various applications, such as sensors, pharmaceuticals, environmentally sensitive pursuits, etc.

Analysis of Ethanolamines: Validation of Semi-Volatile Analysis by HPLC-MS/MS by EPA Method MS888

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owens, J; Vu, A; Koester, C

The Environmental Protection Agency's (EPA) Region 5 Chicago Regional Laboratory (CRL) developed a method titled 'Analysis of Diethanolamine, Triethanolamine, n-Methyldiethanolamine, and n-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS): EPA Method MS888'. This draft standard operating procedure (SOP) was distributed to multiple EPA laboratories and to Lawrence Livermore National Laboratory, which was tasked to serve as a reference laboratory for EPA's Environmental Reference Laboratory Network (ERLN) and to develop and validate analytical procedures. The primary objective of this study was to validate and verify the analytical procedures described in 'EPA Method MS888' for analysis of themore » listed ethanolamines in aqueous samples. The gathered data from this validation study will be used to: (1) demonstrate analytical method performance; (2) generate quality control acceptance criteria; and (3) revise the SOP to provide a validated method that would be available for use during a homeland security event. The data contained in this report will be compiled, by EPA CRL, with data generated by other EPA Regional laboratories so that performance metrics of 'EPA Method MS888' can be determined.« less

Advancing Health and Environmental Disease Tracking: A 5-Year Follow-Up Study

PubMed Central

Litt, Jill S.; Wismann, Andrea; Resnick, Beth; Dawson, Rebecca Smullin; Hano, Mary; Burke, Thomas A.

2007-01-01

Objectives. Our goal was to gain an understanding of the extent to which environmental public health tracking (EPHT) has progressed since the release of the 2000 Pew Environmental Health Commission report examining the nation’s EPHT infrastructure. Methods. As a follow-up to the Pew Commission report, we conducted a telephone survey of state practitioners in an effort to assess EPHT trends and changes in state-level capacities and activities over the past several years. Results. We found that new and enhanced federal–state partnerships; improved surveillance, data analysis, and communication capacities; and enhanced support of tracking personnel have provided a foundation for progress in the area of EPHT. Also, the Centers for Disease Control and Prevention’s support of EPHT has strengthened the national environmental public health infrastructure and capacity to track environmental hazards, exposures, and health. Conclusions. Improved funding, data access, and translation of data to prevention activities are critical to sustaining progress in EPHT and developing the evidence base necessary for assessing the longer-term impacts and efficacy of EPHT and related environmental health improvements. PMID:17267714

A case study of the Australian Plague Locust Commission and environmental due diligence: why mere legislative compliance is no longer sufficient for environmentally responsible locust control in Australia.

PubMed

Story, Paul G; Walker, Paul W; McRae, Heath; Hamilton, John G

2005-07-01

The Australian Plague Locust Commission (APLC) manages locust populations across 2 million square kilometers of eastern Australia using the aerial application of chemical and biological control agents to protect agricultural production. This occurs via a preventative control strategy involving ultralow-volume spray equipment to distribute small droplets of control agent over a target area. The economic costs of, and potential gains stemming from, locust control are well documented. The application of insecticides, however, to fragile arid and semiarid ecosystems is a task that brings with it both real and perceived environmental issues. The APLC is proactive in addressing these issues through a combination of targeted environmental operational research, an ISO-14001-aligned Environmental Management System (EMS), and links with environmental regulatory and research institutions. Increasing due diligence components within Australian environmental legislation dictate that mere legislative compliance is no longer sufficient for industries to ensure that they meet their environmental obligations. The development of external research links and the formulation of an EMS for locust control have enabled the APLC to identify environmental issues and trends, quantify objective environmental targets and strategies, and facilitate continuous improvement in its environmental performance, while maintaining stakeholder support. This article outlines the environmental issues faced by the APLC, the research programs in place to address these issues, and the procedures in place to incorporate research findings into the organization's operational structure.

Automated image analysis for quantitative fluorescence in situ hybridization with environmental samples.

PubMed

Zhou, Zhi; Pons, Marie Noëlle; Raskin, Lutgarde; Zilles, Julie L

2007-05-01

When fluorescence in situ hybridization (FISH) analyses are performed with complex environmental samples, difficulties related to the presence of microbial cell aggregates and nonuniform background fluorescence are often encountered. The objective of this study was to develop a robust and automated quantitative FISH method for complex environmental samples, such as manure and soil. The method and duration of sample dispersion were optimized to reduce the interference of cell aggregates. An automated image analysis program that detects cells from 4',6'-diamidino-2-phenylindole (DAPI) micrographs and extracts the maximum and mean fluorescence intensities for each cell from corresponding FISH images was developed with the software Visilog. Intensity thresholds were not consistent even for duplicate analyses, so alternative ways of classifying signals were investigated. In the resulting method, the intensity data were divided into clusters using fuzzy c-means clustering, and the resulting clusters were classified as target (positive) or nontarget (negative). A manual quality control confirmed this classification. With this method, 50.4, 72.1, and 64.9% of the cells in two swine manure samples and one soil sample, respectively, were positive as determined with a 16S rRNA-targeted bacterial probe (S-D-Bact-0338-a-A-18). Manual counting resulted in corresponding values of 52.3, 70.6, and 61.5%, respectively. In two swine manure samples and one soil sample 21.6, 12.3, and 2.5% of the cells were positive with an archaeal probe (S-D-Arch-0915-a-A-20), respectively. Manual counting resulted in corresponding values of 22.4, 14.0, and 2.9%, respectively. This automated method should facilitate quantitative analysis of FISH images for a variety of complex environmental samples.

Bacterial Contamination of Hospital Bed-Control Handsets in a Surgical Setting: A Potential Marker of Contamination of the Healthcare Environment

PubMed Central

Brady, RRW; Kalima, P; Damani, NN; Wilson, RG; Dunlop, MG

2007-01-01

INTRODUCTION Patients undergoing colorectal surgical resections have a high incidence of surgical site infection (SSI). Many patient-specific risk factors have been recognised in association with SSI in such patients, but environmental contamination is increasingly recognised as a contributor to hospital-acquired infection (HAI). This study set out to describe the bacterial contamination of the patient environment, using hospital bed-control handsets, as they are frequently handled by both staff and patients and represent a marker of environmental contamination. PATIENTS AND METHODS On two unannounced sampling events, 1 week apart, 140 bacteriological assessments were made of 70 hospital bed control handsets within a specialist colorectal surgical unit. RESULTS Of the handsets examined, 67 (95.7%) demonstrated at least one bacterial species (52.9% grew 1, 30% grew 2 and 12.9% grew 3 or more bacterial species). Of these, 29 (41.4%) bed-control handsets grew bacteria known to cause nosocomial infection, including 22 (31.4%) handsets which grew Enterococcus spp., 9 (12.9%) which grew MRSA, 2 (2.9%) which grew MSSA, 2 (2.9%) which grew coliforms, and 1 (1.4%) handset which grew anaerobes. At 1-week follow-up, 31 bed-control handsets showed evidence of contamination by the same bacterial species. CONCLUSIONS This study revealed high levels of bacteria known to cause HAI, contaminating hospital bed-control handsets in a surgical setting. Further study is now required to confirm whether hospital environmental contamination is causally involved in SSI. PMID:17959000

Integrated farm sustainability assessment for the environmental management of rural activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stachetii Rodrigues, Geraldo, E-mail: stacheti@cnpma.embrapa.b; Aparecida Rodrigues, Izilda, E-mail: isis@cnpma.embrapa.b; Almeida Buschinelli, Claudio Cesar de, E-mail: buschi@cnpma.embrapa.b

2010-07-15

Farmers have been increasingly called upon to respond to an ongoing redefinition in consumers' demands, having as a converging theme the search for sustainable production practices. In order to satisfy this objective, instruments for the environmental management of agricultural activities have been sought out. Environmental impact assessment methods are appropriate tools to address the choice of technologies and management practices to minimize negative effects of agricultural development, while maximizing productive efficiency, sound usage of natural resources, conservation of ecological assets and equitable access to wealth generation means. The 'system for weighted environmental impact assessment of rural activities' (APOIA-NovoRural) presented inmore » this paper is organized to provide integrated farm sustainability assessment according to quantitative environmental standards and defined socio-economic benchmarks. The system integrates sixty-two objective indicators in five sustainability dimensions - (i) Landscape ecology, (ii) Environmental quality (atmosphere, water and soil), (iii) Sociocultural values, (iv) Economic values, and (v) Management and administration. Impact indices are expressed in three integration levels: (i) specific indicators, that offer a diagnostic and managerial tool for farmers and rural administrators, by pointing out particular attributes of the rural activities that may be failing to comply with defined environmental performance objectives; (ii) integrated sustainability dimensions, that show decision-makers the major contributions of the rural activities toward local sustainable development, facilitating the definition of control actions and promotion measures; and (iii) aggregated sustainability index, that can be considered a yardstick for eco-certification purposes. Nine fully documented case studies carried out with the APOIA-NovoRural system, focusing on different scales, diverse rural activities/farming systems, and contrasting spatial/territorial contexts, attest to the malleability of the method and its applicability as an integrated farm environmental management tool.« less

A preliminary study to evaluate a patient-centred asthma education programme on parental control of home environment and asthma signs and symptoms in children with moderate-to-severe asthma.

PubMed

Tzeng, Li-Fen; Chiang, Li-Chi; Hsueh, Kai-Chung; Ma, Wei-Fen; Fu, Lin-Shien

2010-05-01

To evaluate the effectiveness of a nurse-led patient-centred asthma education programme on home environmental control behaviours of parents of children with moderate or severe asthma. Reducing allergic triggers is important self-management behaviour for preventing asthma attacks and patient-centred asthma education has been shown to effectively manage chronic disease. A preliminary quasi-experimental, non-equivalent control group design was used. Dyads (n = 75) of parents and their children with moderate or severe asthma (ages 6-14 years) were purposively recruited from the asthma clinics of two hospitals in central Taiwan. The experimental group of 38 children/parents from one hospital received patient-centred asthma education. The comparison group of 37 children/parents from the other hospital received routine individual education. At pretest and at the end of the three-month patient-centred asthma education programme, we measured parents' control of home environmental triggers, children's asthma signs/symptoms and children's pulmonary function. Data were analysed by the general linear model for repeat measures. The level of improvement in dust and cleaning methods was significantly greater among parents in the experimental group than among those in the comparison group (p < 0.05). Children with moderate or severe asthma in the experimental group had fewer signs/symptoms of asthma and better lung function than children in the comparison group. Our patient-centred asthma education programme improved parents' home environmental control and children's asthma sign/symptoms and lung function. Nurses can play primary roles as patient educators in asthma clinics. Well-trained patient educators can continuously monitor self-management behaviours to improve patients' compliance with home environmental control, thus leading to better physical outcomes in children with asthma than routine individual asthma education alone.

Transnational organizing: Issue professionals in environmental sustainability networks.

PubMed

Henriksen, Lasse Folke; Seabrooke, Leonard

2016-09-01

An ongoing question for institutional theory is how organizing occurs transnationally, where institution building occurs in a highly ambiguous environment. This article suggests that at the core of transnational organizing is competition and coordination within professional and organizational networks over who controls issues. Transnational issues are commonly organized through professional battles over how issues are treated and what tasks are involved. These professional struggles are often more important than what organization has a formal mandate over an issue. We highlight how 'issue professionals' operate in two-level professional and organizational networks to control issues. This two-level network provides the context for action in which professionals do their institutional work. The two-level network carries information about professional incentives and also norms about how issues should be treated and governed by organizations. Using network and career sequences methods, we provide a case of transnational organizing through professionals who attempt issue control and network management on transnational environmental sustainability certification. The article questions how transnational organizing happens, and how we can best identify attempts at issue control.

Transnational organizing: Issue professionals in environmental sustainability networks

PubMed Central

Henriksen, Lasse Folke; Seabrooke, Leonard

2015-01-01

An ongoing question for institutional theory is how organizing occurs transnationally, where institution building occurs in a highly ambiguous environment. This article suggests that at the core of transnational organizing is competition and coordination within professional and organizational networks over who controls issues. Transnational issues are commonly organized through professional battles over how issues are treated and what tasks are involved. These professional struggles are often more important than what organization has a formal mandate over an issue. We highlight how ‘issue professionals’ operate in two-level professional and organizational networks to control issues. This two-level network provides the context for action in which professionals do their institutional work. The two-level network carries information about professional incentives and also norms about how issues should be treated and governed by organizations. Using network and career sequences methods, we provide a case of transnational organizing through professionals who attempt issue control and network management on transnational environmental sustainability certification. The article questions how transnational organizing happens, and how we can best identify attempts at issue control. PMID:28490973

76 FR 4859 - Availability of an Environmental Assessment and Finding of No Significant Impact for a Biological...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-27

...] Availability of an Environmental Assessment and Finding of No Significant Impact for a Biological Control Agent... environmental assessment and finding of no significant impact relative to the control of Asian citrus psyllid... the control of ACP. \\1\\ To view the notice, environmental assessment, finding of no significant impact...

Controlled synthesis of titania using water-soluble titanium complexes: A review

NASA Astrophysics Data System (ADS)

Truong, Quang Duc; Dien, Luong Xuan; Vo, Dai-Viet N.; Le, Thanh Son

2017-07-01

The development of human society has led to the increase in energy and resources consumption as well as the arising problems of environmental damage and the toxicity to the human health. The development of novel synthesis method which tolerates utilization of toxic solvents and chemicals would fulfill the demand of the society for safer, softer, and environmental friendly technologies. For the past decades, a remarkable progress has been attained in the development of new water-soluble titanium complexes (WSTC) and their use for the synthesis of nanocrystalline titanium dioxide materials by aqueous solution-based approaches. The progress of synthesis of nanocrystalline titanium dioxide using such WSTCs is reviewed in this work. The key structural features responsible for the successfully controlled synthesis of TiO2 are discussed to provide guidelines for the morphology-controlled synthesis. Finally, this review ends with a summary and some perspectives on the challenges as well as new directions in this fascinating research.

Data-Driven Based Asynchronous Motor Control for Printing Servo Systems

NASA Astrophysics Data System (ADS)

Bian, Min; Guo, Qingyun

Modern digital printing equipment aims to the environmental-friendly industry with high dynamic performances and control precision and low vibration and abrasion. High performance motion control system of printing servo systems was required. Control system of asynchronous motor based on data acquisition was proposed. Iterative learning control (ILC) algorithm was studied. PID control was widely used in the motion control. However, it was sensitive to the disturbances and model parameters variation. The ILC applied the history error data and present control signals to approximate the control signal directly in order to fully track the expect trajectory without the system models and structures. The motor control algorithm based on the ILC and PID was constructed and simulation results were given. The results show that data-driven control method is effective dealing with bounded disturbances for the motion control of printing servo systems.

Environmental Engineering Approaches toward Sustainable Management of Spider Mites.

PubMed

Suzuki, Takeshi

2012-10-26

Integrated pest management (IPM), which combines physical, biological, and chemical control measures to complementary effect, is one of the most important approaches to environmentally friendly sustainable agriculture. To expand IPM, we need to develop new pest control measures, reinforce existing measures, and investigate interactions between measures. Continued progress in the development of environmental control technologies and consequent price drops have facilitated their integration into plant production and pest control. Here I describe environmental control technologies for the IPM of spider mites through: (1) the disturbance of photoperiod-dependent diapause by artificial light, which may lead to death in seasonal environments; (2) the use of ultraviolet radiation to kill or repel mites; and (3) the use of water vapor control for the long-term cold storage of commercially available natural enemies. Such environmental control technologies have great potential for the efficient control of spider mites through direct physical effects and indirect effects via natural enemies.

Environmental Engineering Approaches toward Sustainable Management of Spider Mites

PubMed Central

Suzuki, Takeshi

2012-01-01

Integrated pest management (IPM), which combines physical, biological, and chemical control measures to complementary effect, is one of the most important approaches to environmentally friendly sustainable agriculture. To expand IPM, we need to develop new pest control measures, reinforce existing measures, and investigate interactions between measures. Continued progress in the development of environmental control technologies and consequent price drops have facilitated their integration into plant production and pest control. Here I describe environmental control technologies for the IPM of spider mites through: (1) the disturbance of photoperiod-dependent diapause by artificial light, which may lead to death in seasonal environments; (2) the use of ultraviolet radiation to kill or repel mites; and (3) the use of water vapor control for the long-term cold storage of commercially available natural enemies. Such environmental control technologies have great potential for the efficient control of spider mites through direct physical effects and indirect effects via natural enemies. PMID:26466730

Lunar Module Environmental Control System Design Considerations and Failure Modes. Part 2

NASA Technical Reports Server (NTRS)

Interbartolo, Michael A.

2009-01-01

This viewgraph presentation seeks to describe the Lunar Module Environmental Control System (ECS) subsystem testing and redesign and seeks to summarize the in-flight failures of the Lunar Module (LM) Environmental Control System (ECS).

Environmental health impact in the hospital laundry.

PubMed

Byrns, G E; Bland, L A

1980-01-01

The task of surveying the hospital laundry is often dismissed by public health officials as unnecessary because the laundry cycle is generally considered to be capable of destroying all pathogens. Even though a properly operated laundry can produce a relatively bacteria free product, there are a number of variables that have an impact on the bacterial quality of the linen before it reaches the patient. It is vital that surveillance personnel understand these factors during processing, transporting, or sorting linen so that the final product is aesthetically, chemically, and bacteriologically acceptable for patient use. At the U. S. Public Health Service Hospital laundry in New Orleans, surveillance by the Environmental Health Department has identified potential problem areas. Operational improvements have been instituted at this laundry that would not have been possible without a thorough understanding of the laundry cycle. The authors describe the laundry cycle, including potential problem areas; identify useful microbial and chemical surveillance methods; and discuss process control procedures. This information will help the environmental health worker in discussions with laundry personnel regarding contamination control and operational efficiency.

Urinary carcinogenic 4-6 ring polycyclic aromatic hydrocarbons in coke oven workers and in subjects belonging to the general population: role of occupational and environmental exposure.

PubMed

Campo, Laura; Fustinoni, Silvia; Consonni, Dario; Pavanello, Sofia; Kapka, Lucyna; Siwinska, Ewa; Mielzyňska, Danuta; Bertazzi, PierAlberto

2014-03-01

A new solid phase microextraction-gas chromatography-mass spectrometry method (SPME-GC-MS) to detect urinary unmetabolized 3-, 6-ring polycyclic aromatic hydrocarbons (PAHs) was applied to coke oven workers and general population subjects with the aim to assess exposure to carcinogenic PAHs, to evaluate the role of occupational and environmental variables on PAHs levels, and to compare present results with those previously obtained with a less sensitive method. A total of 104 coke oven workers (CW) from Poland [recruited in 2000 (CW-2000; n=55) and 2006 (CW-2006; n=49)], and 45 control subjects from the same area, provided urine spot samples for measurement of 10 PAHs (from phenanthrene to benzo[g,h,i]perylene). The comparison between the two methods was performed only on CW-2000 subjects. Information regarding personal characteristics and job variables was collected by a questionnaire. The new method enables the quantification of 5-, 6-ring PAHs; precision and accuracy were in the 7.3-20.8% and 89.4-110% range, respectively; in CW-2000 samples results obtained with the new and the old method were highly correlated (Lin's concordance correlation coefficients: from 0.790 to 0.965); the mean difference between measured PAHS increased with the molecular weight of the analytes (from +5 to +27%). Urinary PAHs were above or equal to the quantification limit, depending on the compound, in 67-100% (min-max), 26-100% and 6-100% of samples from CW-2000, CW-2006 and controls, respectively. Chrysene and benz[a]anthracene were the most abundant carcinogenic PAHs with median levels of 43.4, 13.4, and 2.3 ng/L and 45.9, 14.9, and 0.7 ng/L in CW-2000, CW-2006, and controls, respectively, while benzo[a]pyrene levels were 6.5, 0.7 and <0.5 ng/L. The multiple linear regression model showed that the determinants of exposure were the use of wood and/or coke for house heating for controls, and job title or the plant for CW-2006. Urinary benzo[a]pyrene and other carcinogenic PAHs were, for the first time, quantified in urine samples from both occupationally and environmentally exposed subjects. These results show that urinary PAHs can discriminate exposure at different levels. Moreover, the simultaneous determination of several PAHs allows for the development of excretion profiles to assess exposure to specific compounds. Copyright © 2013 Elsevier GmbH. All rights reserved.

Design and simulation of permanent magnet synchronous motor control system

NASA Astrophysics Data System (ADS)

Li, Li; Liu, Yongqiu

2018-06-01

In recent years, with the development of power electronics, microelectronics, new motor control theory and rare earth permanent magnet materials, permanent magnet synchronous motors have been rapidly applied. Permanent magnet synchronous motors have the advantages of small size, low loss and high efficiency. Today, energy conservation and environmental protection are increasingly valued. It is very necessary to study them. Permanent magnet synchronous motor control system has a wide range of application prospects in the fields of electric vehicles, ships and other transportation. Using the simulation function of MATLAB/SIMULINK, a modular design structure was used to simulate the whole system model of speed loop adjustment, current PI modulation, SVPWM (Space Vector Pulse Width Module) wave generation and double closed loop. The results show that this control method has good robustness, and this method can improve the design efficiency and shorten the system design time. In this article, the analysis of the control principle of modern permanent magnet synchronous motor and the various processes of MATLAB simulation application will be analyzed in detail. The basic theory, basic method and application technology of the permanent magnet synchronous motor control system are systematically introduced.

Default Mode Network Connectivity as a Function of Familial and Environmental Risk for Psychotic Disorder

PubMed Central

Peeters, Sanne C. T.; van de Ven, Vincent; Gronenschild, Ed H. B. M; Patel, Ameera X.; Habets, Petra; Goebel, Rainer; van Os, Jim; Marcelis, Machteld

2015-01-01

Background Research suggests that altered interregional connectivity in specific networks, such as the default mode network (DMN), is associated with cognitive and psychotic symptoms in schizophrenia. In addition, frontal and limbic connectivity alterations have been associated with trauma, drug use and urban upbringing, though these environmental exposures have never been examined in relation to DMN functional connectivity in psychotic disorder. Methods Resting-state functional MRI scans were obtained from 73 patients with psychotic disorder, 83 non-psychotic siblings of patients with psychotic disorder and 72 healthy controls. Posterior cingulate cortex (PCC) seed-based correlation analysis was used to estimate functional connectivity within the DMN. DMN functional connectivity was examined in relation to group (familial risk), group × environmental exposure (to cannabis, developmental trauma and urbanicity) and symptomatology. Results There was a significant association between group and PCC connectivity with the inferior parietal lobule (IPL), the precuneus (PCu) and the medial prefrontal cortex (MPFC). Compared to controls, patients and siblings had increased PCC connectivity with the IPL, PCu and MPFC. In the IPL and PCu, the functional connectivity of siblings was intermediate to that of controls and patients. No significant associations were found between DMN connectivity and (subclinical) psychotic/cognitive symptoms. In addition, there were no significant interactions between group and environmental exposures in the model of PCC functional connectivity. Discussion Increased functional connectivity in individuals with (increased risk for) psychotic disorder may reflect trait-related network alterations. The within-network “connectivity at rest” intermediate phenotype was not associated with (subclinical) psychotic or cognitive symptoms. The association between familial risk and DMN connectivity was not conditional on environmental exposure. PMID:25790002

Vancomycin-Resistant Enterococci (VRE) in The Intensive Care Unit in a Nonoutbreak Setting: Identification of Potential Reservoirs and Epidemiological Associations Between Patient and Environmental VRE.

PubMed

McDermott, Hélène; Skally, Mairead; O'Rourke, James; Humphreys, Hilary; Fitzgerald-Hughes, Deirdre

2018-01-01

OBJECTIVE Among nosocomial bloodstream infections caused by enterococcal species, Ireland has the highest proportion caused by vancomycin-resistant enterococci (VRE) in Europe at 45.8%. The contribution of the near-patient environment to VRE transmission outside of outbreaks was investigated. DESIGN A prospective observational study was conducted during 7 sampling periods. METHODS Recovery of VRE isolates by swabbing the near-patient environment and patients in the intensive care unit (ICU) was conducted to identify reservoirs, clinical and molecular epidemiological associations, and the success of active surveillance cultures (ASCs). RESULTS Of 289 sampling occasions involving 157 patients and their bed spaces, VRE isolates were recovered from patient bed spaces, clinical samples, or both on 114 of 289 sampling occasions (39.4%). The patient and their bed space were positive for VRE on 34 of 114 VRE-associated sampling occasions (29.8%). Of 1,647 environment samples, 107 sites (6.5%) were VRE positive, with significantly greater VRE recovery from isolation rooms than from the open-plan area (9.1% vs 4.1%; P < .0001). The most frequently VRE-contaminated sites were the drip stand, bed control panel, and chart holders, which together accounted for 61% of contaminated sites. The use of ASCs resulted in a 172% increase in identification of VRE-colonized patients. Molecular typing revealed 2 environmental clusters, 1 cluster involving 3 patients and generally greater heterogeneity of patient isolates compared to environmental isolates. CONCLUSION Even outside of outbreaks, near-patient ICU environmental contamination with VRE is common. Better infection control policies that limit environmental transmission of VRE in the ICU and that are supported by molecular epidemiological studies, in real time, are needed. Infect Control Hosp Epidemiol 2018;39:40-45.

Improving the asthma disparity gap with legal advocacy? A qualitative study of patient-identified challenges to improve social and environmental factors that contribute to poorly controlled asthma.

PubMed

Harris, Drew A; Mainardi, Anne; Iyamu, Osatohamwen; Rosenthal, Marjorie S; Bruce, R Douglas; Pisani, Margaret A; Redlich, Carrie A

2017-09-05

To identify challenges that disadvantaged adults with asthma face in mitigating social and environmental factors associated with poor symptom control. Using a community-engaged approach, we partnered with a community health center in New Haven, CT to conduct in-person interviews and a written survey of asthmatic adults with poor symptom control. Using the constant comparative method, we analyzed participant interviews to establish emerging themes and identify common barriers to improved outcomes. Through a written survey utilizing clinically validated questions, we assessed information on access to medical care, asthma control, and selected social and environmental risk factors. Twenty-one patients (mean age 47, 62% female, 71% Black, 95% insured by Medicaid) participated. The average Asthma Control Test (ACT) score was 11.6. Seventy-six percent of participants were currently employed and of those, 75% reported work-related symptoms. Among participants currently in housing, 59% reported exposure to domiciliary mice and 47% to mold. We identified three themes that summarize the challenges the study participants face: 1) Lack of knowledge about home and workplace asthma triggers; 2) Lack of awareness of legal rights or resources available to mitigate adverse conditions in the home or work environment; and 3) Fear of retaliation from landlords or employers, including threats of eviction, sexual assault, and job loss. Patients with poorly controlled asthma in a disadvantaged urban northeast community identified common barriers in both the domestic and work environments that impeded attainment of symptom control. These challenges may be best addressed through legal advocacy for those most at risk.

[Research on fuzzy proportional-integral-derivative control of master-slave minimally invasive operation robot driver].

PubMed

Zhao, Ximei; Ren, Chengyi; Liu, Hao; Li, Haogyi

2014-12-01

Robotic catheter minimally invasive operation requires that the driver control system has the advantages of quick response, strong anti-jamming and real-time tracking of target trajectory. Since the catheter parameters of itself and movement environment and other factors continuously change, when the driver is controlled using traditional proportional-integral-derivative (PID), the controller gain becomes fixed once the PID parameters are set. It can not change with the change of the parameters of the object and environmental disturbance so that its change affects the position tracking accuracy, and may bring a large overshoot endangering patients' vessel. Therefore, this paper adopts fuzzy PID control method to adjust PID gain parameters in the tracking process in order to improve the system anti-interference ability, dynamic performance and tracking accuracy. The simulation results showed that the fuzzy PID control method had a fast tracking performance and a strong robustness. Compared with those of traditional PID control, the feasibility and practicability of fuzzy PID control are verified in a robotic catheter minimally invasive operation.

Home environment: association with hyperactivity/impulsivity in children with ADHD and their non-ADHD siblings

PubMed Central

Mulligan, Aisling; Anney, Richard; Butler, Louise; O’Regan, Myra; Richardson, Thomas; Tulewicz, Edyta Maria; Fitzgerald, Michael; Gill, Michael

2011-01-01

Objective We wished to ascertain if there is an association between symptoms of Attention-Deficit/Hyperactivity Disorder (ADHD) and home environment in children with ADHD and non-ADHD siblings, controlling for other environmental measures. Method 96 children with ADHD combined type (ADHD-CT) and their siblings participated in the study. Parent and teacher Conners’ rating scales were completed and home environment was assessed using the Middle Childhood and Early Adolescent Home Observation for Measurement of the Environment (HOME). ADHD symptoms were assessed for correlation with HOME in children with ADHD-CT and non-ADHD siblings and multiple regression analysis was used to control for gender, socio-economic status, exposure to nicotine, exposure to alcohol in utero, birth weight, gestational age, pregnancy and perinatal risk factors. The presence of oppositional disorders was assessed for association with HOME score in those with ADHD-CT. The multiple regression analysis was repeated controlling for environmental factors and for oppositional disorders in those with ADHD-CT. Oppositional symptoms were assessed for correlation with HOME score in non-ADHD siblings. Results Teacher-rated hyperactive/impulsive scores correlated with HOME (r = −.27, p <.01) in children with ADHD-CT. This association remained significant when other environmental factors and oppositional disorders were controlled for. Environmental factors and gender contributed to 30% of the variance of ADHD symptoms in ADHD-CT. Parent-rated hyperactive/impulsive scores also correlated with HOME (r = −.28, p < .05) for non-ADHD siblings. An association between HOME and diagnosis of oppositional defiant disorder or CD was found for children with ADHD-CT and between HOME and oppositional symptoms in non-ADHD siblings. Conclusions The home environment has a small but significant association with hyperactive/impulsive symptoms in children with ADHD-CT and non-ADHD siblings. This association remained when other environmental factors were taken into account. Oppositional symptoms are associated with home environment in ADHD-CT and in non-ADHD siblings. PMID:22168816

Extraction of Aerosol-Deposited Yersinia pestis from Indoor Surfaces To Determine Bacterial Environmental Decay.

PubMed

Gut, Ian M; Bartlett, Ryan A; Yeager, John J; Leroux, Brian; Ratnesar-Shumate, Shanna; Dabisch, Paul; Karaolis, David K R

2016-05-01

Public health and decontamination decisions following an event that causes indoor contamination with a biological agent require knowledge of the environmental persistence of the agent. The goals of this study were to develop methods for experimentally depositing bacteria onto indoor surfaces via aerosol, evaluate methods for sampling and enumerating the agent on surfaces, and use these methods to determine bacterial surface decay. A specialized aerosol deposition chamber was constructed, and methods were established for reproducible and uniform aerosol deposition of bacteria onto four coupon types. The deposition chamber facilitated the control of relative humidity (RH; 10 to 70%) following particle deposition to mimic the conditions of indoor environments, as RH is not controlled by standard heating, ventilation, and air conditioning (HVAC) systems. Extraction and culture-based enumeration methods to quantify the viable bacteria on coupons were shown to be highly sensitive and reproducible. To demonstrate the usefulness of the system for decay studies,Yersinia pestis persistence as a function of surface type at 21 °C and 40% RH was determined to be >40%/min for all surfaces. Based upon these results, at typical indoor temperature and RH, a 6-log reduction in titer would expected to be achieved within 1 h as the result of environmental decay on surfaces without active decontamination. The developed approach will facilitate future persistence and decontamination studies with a broad range of biological agents and surfaces, providing agent decay data to inform both assessments of risk to personnel entering a contaminated site and decontamination decisions following biological contamination of an indoor environment. Public health and decontamination decisions following contamination of an indoor environment with a biological agent require knowledge of the environmental persistence of the agent. Previous studies on Y. pestis persistence have utilized large liquid droplet deposition to provide persistence data. As a result, methods were developed to deposit aerosols containing bacteria onto indoor surfaces, reproducibly enumerate bacteria harvested from coupons, and determine surface decay utilizing Y. pestis The results of this study provide foundational methods required to evaluate surface decay of bacteria and potentially other biological agents, such as viruses, in aerosol particles as a function of surface type and environment. Integrating the data from both aerosol and liquid deposition surface decay studies will provide medical and public health personnel with a more complete understanding of agent persistence on surfaces in contaminated areas for assessment of health risks and to inform decontamination decisions. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Extraction of Aerosol-Deposited Yersinia pestis from Indoor Surfaces To Determine Bacterial Environmental Decay

PubMed Central

Bartlett, Ryan A.; Yeager, John J.; Leroux, Brian; Ratnesar-Shumate, Shanna; Dabisch, Paul

2016-01-01

ABSTRACT Public health and decontamination decisions following an event that causes indoor contamination with a biological agent require knowledge of the environmental persistence of the agent. The goals of this study were to develop methods for experimentally depositing bacteria onto indoor surfaces via aerosol, evaluate methods for sampling and enumerating the agent on surfaces, and use these methods to determine bacterial surface decay. A specialized aerosol deposition chamber was constructed, and methods were established for reproducible and uniform aerosol deposition of bacteria onto four coupon types. The deposition chamber facilitated the control of relative humidity (RH; 10 to 70%) following particle deposition to mimic the conditions of indoor environments, as RH is not controlled by standard heating, ventilation, and air conditioning (HVAC) systems. Extraction and culture-based enumeration methods to quantify the viable bacteria on coupons were shown to be highly sensitive and reproducible. To demonstrate the usefulness of the system for decay studies, Yersinia pestis persistence as a function of surface type at 21°C and 40% RH was determined to be >40%/min for all surfaces. Based upon these results, at typical indoor temperature and RH, a 6-log reduction in titer would expected to be achieved within 1 h as the result of environmental decay on surfaces without active decontamination. The developed approach will facilitate future persistence and decontamination studies with a broad range of biological agents and surfaces, providing agent decay data to inform both assessments of risk to personnel entering a contaminated site and decontamination decisions following biological contamination of an indoor environment. IMPORTANCE Public health and decontamination decisions following contamination of an indoor environment with a biological agent require knowledge of the environmental persistence of the agent. Previous studies on Y. pestis persistence have utilized large liquid droplet deposition to provide persistence data. As a result, methods were developed to deposit aerosols containing bacteria onto indoor surfaces, reproducibly enumerate bacteria harvested from coupons, and determine surface decay utilizing Y. pestis. The results of this study provide foundational methods required to evaluate surface decay of bacteria and potentially other biological agents, such as viruses, in aerosol particles as a function of surface type and environment. Integrating the data from both aerosol and liquid deposition surface decay studies will provide medical and public health personnel with a more complete understanding of agent persistence on surfaces in contaminated areas for assessment of health risks and to inform decontamination decisions. PMID:26944839

Extraction of Greenhouse Areas with Image Processing Methods in Karabuk Province

NASA Astrophysics Data System (ADS)

Yildirima, M. Z.; Ozcan, C.

2017-11-01

Greenhouses provide the environmental conditions to be controlled and regulated as desired while allowing agricultural products to be produced without being affected by external environmental conditions. High quality and a wide variety of agricultural products can be produced throughout the year. In addition, mapping and detection of these areas has great importance in terms of factors such as yield analysis, natural resource management and environmental impact. Various remote sensing techniques are currently available for extraction of greenhouse areas. These techniques are based on the automatic detection and interpretation of objects on remotely sensed images. In this study, greenhouse areas were determined from optical images obtained from Landsat. The study was carried out in the greenhouse areas in Karabuk province. The obtained results are presented with figures and tables.

Social Experiences in Kindergarten and Academic Achievement in Grade 1: A Monozygotic Twin Difference Study

ERIC Educational Resources Information Center

Vitaro, Frank; Boivin, Michel; Brendgen, Mara; Girard, Alain; Dionne, Ginette

2012-01-01

The goal of this study was to examine how different types of social experiences in kindergarten relate to Grade 1 academic achievement, while controlling for possible genetic and shared environmental influences through the use of the monozygotic (MZ) twin difference method. Social experiences in kindergarten included relationship quality with the…

Language Outcomes at 12 Years for Children Exposed Prenatally to Cocaine

ERIC Educational Resources Information Center

Lewis, Barbara A.; Minnes, Sonia; Short, Elizabeth J.; Min, Meeyoung O.; Wu, Miaoping; Lang, Adelaide; Weishampel, Paul; Singer, Lynn T.

2013-01-01

Purpose: In this study, the authors aimed to examine the long-term effects of prenatal cocaine exposure (PCE) on the language development of 12-year-old children using a prospective design, controlling for confounding prenatal drug exposure and environmental factors. Method: Children who were exposed to cocaine in utero (PCE; "n" = 183)…

An attribute-based approach to contingent valuation of forest protection programs

Treesearch

Christopher C. Moore; Thomas P. Holmes; Kathleen P. Bell

2011-01-01

The hemlock woolly adelgid is an invasive insect that is damaging hemlock forests in the eastern United States. Several control methods are available but forest managers are constrained by cost, availability, and environmental concerns. As a result forest managers must decide how to allocate limited conservation resources over heterogeneous landscapes. We develop an...

77 FR 42723 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... Environmental Research Involving Human Subjects; EPA ICR No. 2195.04, OMB Control No. 2070-0169. This is a...-OPP- 2011-0704, to (1) EPA online using http://www.regulations.gov (our preferred method), or by mail..., Confidential Business Information (CBI), or other information whose public disclosure is restricted by statute...

A simple method for estimation of coagulation efficiency in mixed aerosols. [environmental pollution control

NASA Technical Reports Server (NTRS)

Dimmick, R. L.; Boyd, A.; Wolochow, H.

1975-01-01

Aerosols of KBr and AgNO3 were mixed, exposed to light in a glass tube and collected in the dark. About 15% of the collected material was reduced to silver upon development. Thus, two aerosols of particles that react to form a photo-reducible compound can be used to measure coagulation efficiency.

The Application of a Resilience Assessment Approach to Promote Campus Environmental Management: A South African Case Study

ERIC Educational Resources Information Center

Muller, Irene; Tempelhoff, Johann

2016-01-01

Purpose: This paper aims to outline the benefits of using resilience assessment instead of command and control mechanisms to evaluate sustainable campus environments. Design/Methodology/Approach: An exploratory mixed-method design was followed for the purposes of the project. During the first qualitative phase, a historical timeline of the focal…

77 FR 791 - Kasugamycin; Receipt of Application for Emergency Exemption for Use on Apples in Michigan...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2011-1016; FRL-9331-5] Kasugamycin; Receipt of... treat up to 10,000 acres of apples to control fire blight. The applicant proposes the use of a new...-OPP-2011-1016, by one of the following methods: Federal eRulemaking Portal: http://www.regulations.gov...

Bioluminescent bioreporter integrated circuit

DOEpatents

Simpson, Michael L.; Sayler, Gary S.; Paulus, Michael J.

2000-01-01

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Bug Off: A Guide for Integrated Pest Management in Granville Schools.

ERIC Educational Resources Information Center

2001

This guide describes options for the Granville schools when dealing with pests. It is based on Integrated Pest Management (IPM), a philosophy that employs safe and practical pest control methods. The guide can be used to incorporate IPM philosophy into the school systems. The first section provides the environmental context for an interest in…

Effect of Heat on Wounded Warriors in Ground Combat Vehicles: Insights from the Army Medical Community, and the Simulation of a Novel Method for Soldier Thermal Control

DTIC Science & Technology

2012-08-01

soldiers via microclimate cooling [13]. Unfortunately, a common method for direct cooling of the soldiers – surface cooling – can cause cutaneous...Intermittent, Regional Microclimate Cooling," Journal of Applied Physiology, vol. 94, pp. 1841-48, 2003. [18] L. A. Stephenson, C. R. Vernieuw, W...Leammukda and M. A. Kolka, "Skin Temperature Feedback Optimizes Microclimate Cooling," Aviation, Space and Environmental Medicine, vol. 78, pp. 377-382

Analysis of Carbamate Pesticides: Validation of Semi-Volatile Analysis by HPLC-MS/MS by EPA Method MS666

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owens, J; Koester, C

The Environmental Protection Agency's (EPA) Region 5 Chicago Regional Laboratory (CRL) developed a method for analysis of aldicarb, bromadiolone, carbofuran, oxamyl, and methomyl in water by high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS), titled Method EPA MS666. This draft standard operating procedure (SOP) was distributed to multiple EPA laboratories and to Lawrence Livermore National Laboratory, which was tasked to serve as a reference laboratory for EPA's Environmental Reference Laboratory Network (ERLN) and to develop and validate analytical procedures. The primary objective of this study was to validate and verify the analytical procedures described in MS666 for analysis of carbamatemore » pesticides in aqueous samples. The gathered data from this validation study will be used to: (1) demonstrate analytical method performance; (2) generate quality control acceptance criteria; and (3) revise the SOP to provide a validated method that would be available for use during a homeland security event. The data contained in this report will be compiled, by EPA CRL, with data generated by other EPA Regional laboratories so that performance metrics of Method EPA MS666 can be determined.« less

Analysis of Thiodiglycol: Validation of Semi-Volatile Analysis by HPLC-MS/MS by EPA Method MS777

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owens, J; Koester, C

The Environmental Protection Agency's (EPA) Region 5 Chicago Regional Laboratory (CRL) developed a method for the analysis of thiodiglycol, the breakdown product of the sulfur mustard HD, in water by high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS), titled Method EPA MS777 (hereafter referred to as EPA CRL SOP MS777). This draft standard operating procedure (SOP) was distributed to multiple EPA laboratories and to Lawrence Livermore National Laboratory, which was tasked to serve as a reference laboratory for EPA's Environmental Reference Laboratory Network (ERLN) and to develop and validate analytical procedures. The primary objective of this study was to verifymore » the analytical procedures described in MS777 for analysis of thiodiglycol in aqueous samples. The gathered data from this study will be used to: (1) demonstrate analytical method performance; (2) generate quality control acceptance criteria; and (3) revise the SOP to provide a validated method that would be available for use during a homeland security event. The data contained in this report will be compiled, by EPA CRL, with data generated by other EPA Regional laboratories so that performance metrics of Method EPA MS777 can be determined.« less

[Detection of Cryptospordium spp. in environmental water samples by FTA-PCR].

PubMed

Zhang, Xiao-Ping; Zhu, Qian; He, Yan-Yan; Jiang, Li; Jiang, Shou-Fu

2011-02-01

To establish a FTA-polymeras chain reaction (FTA-PCR) method in detection of Cryptospordium spp. in different sources of water. The semi automated immunomagnetic separation (IMS) of Cryptospordium oocysts in environmental water samples was performed firstly, and then genomic DNA of Cryptospordium oocysts was extracted by FTA filters disk. Oligonucleotide primers were designed based on the DNA fragment of the 18 S rRNA gene from C. parvum. Plate DNA was amplified with primers in PCR. The control DNA samples from Toxoplasma gondii,Sarcocystis suihominis, Echinococcus granulosus, and Clonorchis sinensis were amplified simultaneously. All PCR products were detected by agar electrophoresis dyed with ethidium bromide. The 446 bp fragment of DNA was detected in all samples of C. parvum, C. andersoni, and C. baileyi, while it was not detected in control groups in laboratory. No positive samples were found from 10 samples collected from tape water in 5 districts of Shanghai City by FTA-PCR. Nine positive samples were detected totally from 70 different environmental water samples, there were 0 out of 15 samples from the source of tape water, 2 out of 25 from the Huangpu River, 5 out of 15 from rivers around the animal farmers, 1 out of 9 from output water of contaminating water treatment factory, 1 out of 6 from the out gate of living contaminating water. The 446 bp fragment was detected from all the amplified positive water samples. FTA-PCR is an efficient method for gene detection of Cryptospordium oocysts, which could be used in detection of environmental water samples. The contamination degree of Cryptospordium oocysts in the river water around animal farms is high.

A Novel Triplex Quantitative PCR Strategy for Quantification of Toxigenic and Nontoxigenic Vibrio cholerae in Aquatic Environments

PubMed Central

Bliem, Rupert; Schauer, Sonja; Plicka, Helga; Obwaller, Adelheid; Sommer, Regina; Steinrigl, Adolf; Alam, Munirul; Reischer, Georg H.; Farnleitner, Andreas H.

2015-01-01

Vibrio cholerae is a severe human pathogen and a frequent member of aquatic ecosystems. Quantification of V. cholerae in environmental water samples is therefore fundamental for ecological studies and health risk assessment. Beside time-consuming cultivation techniques, quantitative PCR (qPCR) has the potential to provide reliable quantitative data and offers the opportunity to quantify multiple targets simultaneously. A novel triplex qPCR strategy was developed in order to simultaneously quantify toxigenic and nontoxigenic V. cholerae in environmental water samples. To obtain quality-controlled PCR results, an internal amplification control was included. The qPCR assay was specific, highly sensitive, and quantitative across the tested 5-log dynamic range down to a method detection limit of 5 copies per reaction. Repeatability and reproducibility were high for all three tested target genes. For environmental application, global DNA recovery (GR) rates were assessed for drinking water, river water, and water from different lakes. GR rates ranged from 1.6% to 76.4% and were dependent on the environmental background. Uncorrected and GR-corrected V. cholerae abundances were determined in two lakes with extremely high turbidity. Uncorrected abundances ranged from 4.6 × 102 to 2.3 × 104 cell equivalents liter−1, whereas GR-corrected abundances ranged from 4.7 × 103 to 1.6 × 106 cell equivalents liter−1. GR-corrected qPCR results were in good agreement with an independent cell-based direct detection method but were up to 1.6 log higher than cultivation-based abundances. We recommend the newly developed triplex qPCR strategy as a powerful tool to simultaneously quantify toxigenic and nontoxigenic V. cholerae in various aquatic environments for ecological studies as well as for risk assessment programs. PMID:25724966

[The environmental conditions of the Kavkazskie Mineralnye Vody (Caucasian Mineral Waters) health resort region, methods for their monitoring and improvement].

PubMed

Evseeva, M M; Rud', N Iu; Pershin, I M

2012-01-01

This paper describes the unique environmental conditions of the Kavkazskie Mineralnye Vody (Caucasian Mineral Waters) health resort region with special reference to its paramount importance for the national interests of Russia. It is emphasized, however, that the environmental conditions in the region under consideration are far from being satisfactory. In connection with this, the authors point out to the necessity of expanding areas of protective forest stands and prohibition of the implementation of new building projects in the frontal mountain sanitary zones; they draw special attention to the potential danger of degradation of mineral water springs under the influence of changes in the distribution of vertical hydraulic gradients in the upper part of the lithosphere leading to the deterioration of their composition and the contamination of ground and surface waters with municipal and domestic effluents. Special attention is given to the harm and impermissibility of illegal extraction of mineral waters from producing wells. An original method for water quality control and estimation of the optimal production rate is proposed. The authors hypothesize the possible causes behind the discontinuation of mud formation at the Tambukan deposits and substantiate the necessity of using the resource-saving technologies for processing raw materials and urgent measures to eliminate the factors responsible for desalination and pollution of this mineral mud lake. It is concluded that strict state control should be exercised in the region by means of the introduction of the multilevel automated information system for round-the-clock environmental monitoring. The authors believe that only joint efforts of scientists, legislative and executive authorities can preserve Kavkazskie Mineralnye Vody health resort region for the future generations.

Stability of user-friendly blood typing kits stored under typical military field conditions.

PubMed

Bienek, Diane R; Chang, Cheow K; Charlton, David G

2009-10-01

To help preserve in-theater strength within deployed military units, commercially available, rapid, user-friendly ABO-Rh blood typing kits were evaluated to determine their stability in storage conditions commonly encountered by the warfighter. Methods for environmental exposure testing were based on MIL-STD-810F. When Eldon Home Kits 2511 were exposed to various temperature/relative humidity conditions, the results were comparable to those obtained with the control group and those obtained with industry-standard methods. For the ABO-Rh Combination Blood Typing Experiment Kits, 2 of the exposure treatments rendered them unusable. In addition, a third set of exposure treatments adversely affected the kits, resulting in approximately 30% blood type misclassifications. Collectively, this evaluation of commercial blood typing kits revealed that diagnostic performance can vary between products, lots, and environmental storage conditions.

Betweenness-Based Method to Identify Critical Transmission Sectors for Supply Chain Environmental Pressure Mitigation.

PubMed

Liang, Sai; Qu, Shen; Xu, Ming

2016-02-02

To develop industry-specific policies for mitigating environmental pressures, previous studies primarily focus on identifying sectors that directly generate large amounts of environmental pressures (a.k.a. production-based method) or indirectly drive large amounts of environmental pressures through supply chains (e.g., consumption-based method). In addition to those sectors as important environmental pressure producers or drivers, there exist sectors that are also important to environmental pressure mitigation as transmission centers. Economy-wide environmental pressure mitigation might be achieved by improving production efficiency of these key transmission sectors, that is, using less upstream inputs to produce unitary output. We develop a betweenness-based method to measure the importance of transmission sectors, borrowing the betweenness concept from network analysis. We quantify the betweenness of sectors by examining supply chain paths extracted from structural path analysis that pass through a particular sector. We take China as an example and find that those critical transmission sectors identified by betweenness-based method are not always identifiable by existing methods. This indicates that betweenness-based method can provide additional insights that cannot be obtained with existing methods on the roles individual sectors play in generating economy-wide environmental pressures. Betweenness-based method proposed here can therefore complement existing methods for guiding sector-level environmental pressure mitigation strategies.

Eastern Carolina Asthma Prevention Program (ECAPP): An Environmental Intervention Study Among Rural and Underserved Children with Asthma in Eastern North Carolina

PubMed Central

Kearney, Gregory D; Johnson, Lisa C; Xu, Xiaohui; Balanay, Jo Anne G; Lamm, Kevin M; Allen, Daniel L

2014-01-01

OBJECTIVE Asthma is the most common chronic childhood condition affecting 6.3 million (US) children aged less than 18 years. Home-based, multi-component, environmental intervention studies among children with asthma have demonstrated to be effective in reducing asthma symptoms. In this study, a local hospital and university developed an environmental intervention research pilot project, Eastern Carolina Asthma Prevention Program (ECAPP), to evaluate self-reported asthma symptoms, breathing measurements, and number of asthma-related emergency department (ED) visits among low-income, minority children with asthma living in rural, eastern North Carolina. Our goal was to develop a conceptual model and demonstrate any asthma respiratory improvements in children associated with our home-based, environmental intervention. METHODS This project used a single cohort, intervention design approach to compare self-reported asthma-related symptoms, breathing tests, and ED visits over a 6 month period between children with asthma in an intervention study group (n = 12) and children with asthma in a control study group (n = 7). The intervention study group received intense asthma education, three home visits, 2 week follow-up telephone calls, and environmental intervention products for reducing asthma triggers in the home. The control group received education at baseline and 2 week calls, but no intervention products. RESULTS At the end of the study period, significant improvements were observed in the intervention group compared with the control group. Overall, the intervention group experienced a 58% (46 ± SD 26.9) reduction in self-reported asthma symptoms; 76% (34 ± SD 29.7) decrease in rescue medicine; 12% (145 ± SD 11.3) increase in controller medicine; 37% decrease in mean exhaled nitric oxide levels and 33% fewer ED asthma-related visits. CONCLUSION As demonstrated, a combination of efforts appeared effective for improving asthma respiratory symptoms among children in the intervention group. ECAPP is a low cost pilot project that could readily be adapted and expanded into other communities throughout eastern North Carolina. Future efforts could include enhanced partnerships between environmental health professionals at local health departments and pediatric asthma programs at hospitals to carry out ECAPP. PMID:25057240

Indoor Environmental Control Practices and Asthma Management.

PubMed

Matsui, Elizabeth C; Abramson, Stuart L; Sandel, Megan T

2016-11-01

Indoor environmental exposures, particularly allergens and pollutants, are major contributors to asthma morbidity in children; environmental control practices aimed at reducing these exposures are an integral component of asthma management. Some individually tailored environmental control practices that have been shown to reduce asthma symptoms and exacerbations are similar in efficacy and cost to controller medications. As a part of developing tailored strategies regarding environmental control measures, an environmental history can be obtained to evaluate the key indoor environmental exposures that are known to trigger asthma symptoms and exacerbations, including both indoor pollutants and allergens. An environmental history includes questions regarding the presence of pets or pests or evidence of pests in the home, as well as knowledge regarding whether the climatic characteristics in the community favor dust mites. In addition, the history focuses on sources of indoor air pollution, including the presence of smokers who live in the home or care for children and the use of gas stoves and appliances in the home. Serum allergen-specific immunoglobulin E antibody tests can be performed or the patient can be referred for allergy skin testing to identify indoor allergens that are most likely to be clinically relevant. Environmental control strategies are tailored to each potentially relevant indoor exposure and are based on knowledge of the sources and underlying characteristics of the exposure. Strategies include source removal, source control, and mitigation strategies, such as high-efficiency particulate air purifiers and allergen-proof mattress and pillow encasements, as well as education, which can be delivered by primary care pediatricians, allergists, pediatric pulmonologists, other health care workers, or community health workers trained in asthma environmental control and asthma education. Copyright © 2016 by the American Academy of Pediatrics.