32 CFR 651.42 - Actions normally requiring an EIS.

Code of Federal Regulations, 2010 CFR

2010-07-01

... significant impacts are socioeconomic, with no significant biophysical environmental impact). (f) Training...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.42... substances that have the potential to cause significant environmental impact. (d) Land acquisition, leasing...

Cost analysis and environmental impact of nonthermal technologies

USDA-ARS?s Scientific Manuscript database

The cost of high pressure processing (HPP) orange juice and its environmental impact were estimated. In addition, the environmental impact of pulsed electric fields (PEF) and thermal pasteurization were assessed for comparison. The cost analysis was based on commercial processing conditions that wer...

30 CFR 550.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Operations Coordination Documents (docd) § 550.261 What environmental impact analysis (EIA) information must... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What environmental impact analysis (EIA) information must accompany the DPP or DOCD? 550.261 Section 550.261 Mineral Resources BUREAU OF OCEAN ENERGY...

30 CFR 550.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Operations Coordination Documents (docd) § 550.261 What environmental impact analysis (EIA) information must... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What environmental impact analysis (EIA) information must accompany the DPP or DOCD? 550.261 Section 550.261 Mineral Resources BUREAU OF OCEAN ENERGY...

30 CFR 550.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Operations Coordination Documents (docd) § 550.261 What environmental impact analysis (EIA) information must... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What environmental impact analysis (EIA) information must accompany the DPP or DOCD? 550.261 Section 550.261 Mineral Resources BUREAU OF OCEAN ENERGY...

32 CFR 989.4 - Initial considerations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.4 Initial considerations. Air Force personnel will: (a... CATEX from environmental impact analysis (appendix B). (c) Make environmental documents, comments, and... national security interests while at the same time considering important environmental factors. (g...

32 CFR 989.4 - Initial considerations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.4 Initial considerations. Air Force personnel will: (a... CATEX from environmental impact analysis (appendix B). (c) Make environmental documents, comments, and... national security interests while at the same time considering important environmental factors. (g...

32 CFR 989.4 - Initial considerations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.4 Initial considerations. Air Force personnel will: (a... CATEX from environmental impact analysis (appendix B). (c) Make environmental documents, comments, and... national security interests while at the same time considering important environmental factors. (g...

28 CFR 91.62 - Preparing an Environmental Assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... environmental analysis. Any state or local environmental impact review requirements should also be incorporated... laws and regulations as well as similar state and local environmental impact review requirements. (e... FACILITIES Environmental Impact Review Procedures for VOI/TIS Grant Program Environmental Review Procedures...

CERCLA-linked environmental impact and benefit analysis: Evaluating remedial alternatives for the Portland Harbor Superfund Site, Portland, Oregon, USA.

PubMed

McNally, Amanda D; Fitzpatrick, Anne G; Mirchandani, Sera; Salmon, Matthew; Edwards, Deborah A

2018-01-01

This analysis focused on evaluating the environmental consequences of remediation, providing indicators for the environmental quality pillar of 3 "pillars" of the Portland Harbor Sustainability Project (PHSP) framework (the other 2 pillars are economic viability and social equity). The project an environmental impact and benefit analysis (EIBA) and an EIBA-based cost-benefit analysis. Metrics developed in the EIBA were used to quantify and compare remedial alternatives' environmental benefits and impacts in the human and ecological domains, as a result of remedial actions (relative to no action). The cost-benefit results were used to evaluate whether remediation costs were proportionate or disproportionate to the environmental benefits. Alternatives B and D had the highest overall benefit scores, and Alternative F was disproportionately costly relative to its achieved benefits when compared to the other remedial alternatives. Indeed, the costlier alternatives with larger remedial footprints had lower overall EIBA benefit scores-because of substantially more air emissions, noise, and light impacts, and more disturbance to business, recreational access, and habitat during construction-compared to the less costly and smaller alternatives. Put another way, the adverse effects during construction tended to outweigh the long-term benefits, and the net environmental impacts of the larger remedial alternatives far outweighed their small incremental improvements in risk reduction. Results of this Comprehensive Environmental Response Compensation and Liability Act (CERCLA)-linked environmental analysis were integrated with indicators of economic and social impacts of remediation in a stakeholder values-based sustainability framework. These tools (EIBA, EIBA-based cost-benefit analysis, economic impact assessment, and the stakeholder values-based integration) provide transparent and quantitative evaluations of the benefits and impacts associated with remedial alternatives, and should be applied to complex remediation projects to aid environmental decision making. Integr Environ Assess Manag 2018;14:22-31. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

32 CFR 989.16 - Environmental impact statement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain...) Development of major new weapons systems (at decision points that involve demonstration, validation...

32 CFR 989.16 - Environmental impact statement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain...) Development of major new weapons systems (at decision points that involve demonstration, validation...

32 CFR 989.16 - Environmental impact statement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain...) Development of major new weapons systems (at decision points that involve demonstration, validation...

32 CFR 989.16 - Environmental impact statement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain...) Development of major new weapons systems (at decision points that involve demonstration, validation...

78 FR 50022 - Environmental Impact Statement; Asian Longhorned Beetle Eradication Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... submit comments regarding the environmental impact statement by either of the following methods: Federal..., Environmental Protection Specialist, Environmental and Risk Analysis Services, PPD, APHIS, 4700 River Road Unit...] Environmental Impact Statement; Asian Longhorned Beetle Eradication Program AGENCY: Animal and Plant Health...

76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Boulevard. The project will consist of up to 128 wind turbines (1.5 to 3.0 MW each) with a generating... Statement/Final Environmental Impact Report for the Tule Wind Project, California, and Notice of Intent To... Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's...

32 CFR Appendix C to Part 989 - Procedures for Holding Public Hearings on Draft Environmental Impact Statements (EIS)

Code of Federal Regulations, 2012 CFR

2012-07-01

... Environmental Impact Statements (EIS) C Appendix C to Part 989 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) Pt. 989, App. C Appendix C to Part 989—Procedures for Holding Public Hearings on Draft Environmental Impact...

32 CFR Appendix C to Part 989 - Procedures for Holding Public Hearings on Draft Environmental Impact Statements (EIS)

Code of Federal Regulations, 2014 CFR

2014-07-01

... Environmental Impact Statements (EIS) C Appendix C to Part 989 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) Pt. 989, App. C Appendix C to Part 989—Procedures for Holding Public Hearings on Draft Environmental Impact...

76 FR 8708 - Availability of an Environmental Assessment and Finding of No Significant Impact for a Biological...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

...] Availability of an Environmental Assessment and Finding of No Significant Impact for a Biological Control Agent... are advising the public that a final environmental assessment and finding of no significant impact... review and analysis of environmental impacts associated with the proposed biological control program...

Environmental Assessment, Search and Rescue Training, HH-60 and HC-130, 920th Rescue Group, 301st and 39th Rescue Squadrons, Patrick Air Force Base, Florida

DTIC Science & Technology

2003-10-01

920th RQG Final Environmental Assessment i FINDING OF NO SIGNIFICANT IMPACT (FONSI) FOR THE ENVIRONMENTAL ASSESSMENT FOR THE TRAINING OF THE...Regulations 32 Part 989 (Environmental Impact Analysis Process, July 1999), the 920th RQG has requested the U. S. Air Force (USAF), 45th Space Wing...45SW) to conduct an environmental impact analysis of their Proposed Action on PAFB, CCAFS, APAFR, TSR, the Banana River, and the Atlantic Ocean in

32 CFR 775.9 - Documentation and analysis.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the implementing factors of the program that can be ascertained at the time of impact statement... any environmental studies, surveys and impact analyses required by other environmental review laws and... programmatic environmental impact statement discussing the impacts of a wide ranging or long term stepped...

32 CFR 775.9 - Documentation and analysis.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of the implementing factors of the program that can be ascertained at the time of impact statement... any environmental studies, surveys and impact analyses required by other environmental review laws and... programmatic environmental impact statement discussing the impacts of a wide ranging or long term stepped...

32 CFR 775.9 - Documentation and analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of the implementing factors of the program that can be ascertained at the time of impact statement... any environmental studies, surveys and impact analyses required by other environmental review laws and... programmatic environmental impact statement discussing the impacts of a wide ranging or long term stepped...

32 CFR 775.9 - Documentation and analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of the implementing factors of the program that can be ascertained at the time of impact statement... any environmental studies, surveys and impact analyses required by other environmental review laws and... programmatic environmental impact statement discussing the impacts of a wide ranging or long term stepped...

32 CFR 775.9 - Documentation and analysis.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of the implementing factors of the program that can be ascertained at the time of impact statement... any environmental studies, surveys and impact analyses required by other environmental review laws and... programmatic environmental impact statement discussing the impacts of a wide ranging or long term stepped...

A case study by life cycle assessment

NASA Astrophysics Data System (ADS)

Li, Shuyun

2017-05-01

This article aims to assess the potential environmental impact of an electrical grinder during its life cycle. The Life Cycle Inventory Analysis was conducted based on the Simplified Life Cycle Assessment (SLCA) Drivers that calculated from the Valuation of Social Cost and Simplified Life Cycle Assessment Model (VSSM). The detailed results for LCI can be found under Appendix II. The Life Cycle Impact Assessment was performed based on Eco-indicator 99 method. The analysis results indicated that the major contributor to the environmental impact as it accounts for over 60% overall SLCA output. In which, 60% of the emission resulted from the logistic required for the maintenance activities. This was measured by conducting the hotspot analysis. After performing sensitivity analysis, it is evidenced that changing fuel type results in significant decrease environmental footprint. The environmental benefit can also be seen from the negative output values of the recycling activities. By conducting Life Cycle Assessment analysis, the potential environmental impact of the electrical grinder was investigated.

Environmental Impact Analysis: Philosophy and Methods.

ERIC Educational Resources Information Center

Ditton, Robert B.; Goodale, Thomas L.

Proceedings of the Conference on Environmental Impact Analysis held in Green Bay, Wisconsin, January 4-5, 1972, are compiled in this report. The conference served as a forum for exchange of information among State and Federal agencies and educators on experiences with the National Environmental Policy Act of 1970. Hopefully, results of the…

32 CFR 989.13 - Categorical exclusion.

Code of Federal Regulations, 2010 CFR

2010-07-01

... significant cumulative environmental impact. (4) Socioeconomic effects only. (5) Similarity to actions previously assessed and found to have no significant environmental impacts. (c) CATEXs apply to actions in... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.13 Categorical exclusion. (a) CATEXs define those categories...

32 CFR 989.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Acquisition Programs and Major Automated Information System Acquisition Programs. 1 To comply with NEPA and... ANALYSIS PROCESS (EIAP) § 989.1 Purpose. (a) This part implements the Air Force Environmental Impact Analysis Process (EIAP) and provides procedures for environmental impact analysis both within the United...

7 CFR 650.11 - Environmental documents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... § 650.4): (1) Environmental assessments (EA) (2) Environmental impact statements (EIS) (3) Notice of intent (NOI) (4) Finding of no significant impact (FNSI) (5) Record of decision (ROD) (b) The format and... regulatory impact analysis as required by Executive Order 12044. This may necessitate modifying the...

32 CFR 651.45 - Steps in preparing and processing an EIS.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.45... alternatives, and state why the action may have unknown and/or significant environmental impacts. (3) The... delegations and committees, governors, national environmental organizations, the DOD and federal agency...

32 CFR 651.45 - Steps in preparing and processing an EIS.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.45... alternatives, and state why the action may have unknown and/or significant environmental impacts. (3) The... delegations and committees, governors, national environmental organizations, the DOD and federal agency...

32 CFR 651.45 - Steps in preparing and processing an EIS.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.45... alternatives, and state why the action may have unknown and/or significant environmental impacts. (3) The... delegations and committees, governors, national environmental organizations, the DOD and federal agency...

32 CFR 651.45 - Steps in preparing and processing an EIS.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.45... alternatives, and state why the action may have unknown and/or significant environmental impacts. (3) The... delegations and committees, governors, national environmental organizations, the DOD and federal agency...

32 CFR 651.42 - Actions normally requiring an EIS.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.42... effect on wetlands, coastal zones, or other areas of critical environmental concern. (c) The disposal of... substances that have the potential to cause significant environmental impact. (d) Land acquisition, leasing...

32 CFR 651.42 - Actions normally requiring an EIS.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.42... effect on wetlands, coastal zones, or other areas of critical environmental concern. (c) The disposal of... substances that have the potential to cause significant environmental impact. (d) Land acquisition, leasing...

32 CFR 651.42 - Actions normally requiring an EIS.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.42... effect on wetlands, coastal zones, or other areas of critical environmental concern. (c) The disposal of... substances that have the potential to cause significant environmental impact. (d) Land acquisition, leasing...

43 CFR 3410.2-2 - Environmental analysis.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Environmental analysis. 3410.2-2 Section... § 3410.2-2 Environmental analysis. (a) Before an exploration license may be issued, the authorized officer shall prepare an environmental assessment or environmental impact statement, if necessary, of the...

43 CFR 3425.3 - Environmental analysis.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Environmental analysis. 3425.3 Section... § 3425.3 Environmental analysis. (a) Before a lease sale may be held under this subpart, the authorized officer shall prepare an environmental assessment or environmental impact statement of the proposed lease...

Environmental Assessment for A-29 Light Air Support (LAS) Training Beddown

DTIC Science & Technology

2014-08-21

Nation. Appendix A Updated to include responses/letters from federal and local agencies. Page 1 of 1 FINDING OF NO SIGNIFICANT IMPACT A-29...32 CFR §989, Environmental Impact Analysis Process, the U.S. Air Force (Air Force) assessed the potential environmental consequences associated with...protection measures to avoid or reduce adverse environmental impacts . The EA considers all potential impacts of basing this training unit at three

Fuzzy Clustering Analysis in Environmental Impact Assessment--A Complement Tool to Environmental Quality Index.

ERIC Educational Resources Information Center

Kung, Hsiang-Te; And Others

1993-01-01

In spite of rapid progress achieved in the methodological research underlying environmental impact assessment (EIA), the problem of weighting various parameters has not yet been solved. This paper presents a new approach, fuzzy clustering analysis, which is illustrated with an EIA case study on Baoshan-Wusong District in Shanghai, China. (Author)

Assessing the environmental impacts of aircraft noise and emissions

NASA Astrophysics Data System (ADS)

Mahashabde, Anuja; Wolfe, Philip; Ashok, Akshay; Dorbian, Christopher; He, Qinxian; Fan, Alice; Lukachko, Stephen; Mozdzanowska, Aleksandra; Wollersheim, Christoph; Barrett, Steven R. H.; Locke, Maryalice; Waitz, Ian A.

2011-01-01

With the projected growth in demand for commercial aviation, many anticipate increased environmental impacts associated with noise, air quality, and climate change. Therefore, decision-makers and stakeholders are seeking policies, technologies, and operational procedures that balance environmental and economic interests. The main objective of this paper is to address shortcomings in current decision-making practices for aviation environmental policies. We review knowledge of the noise, air quality, and climate impacts of aviation, and demonstrate how including environmental impact assessment and quantifying uncertainties can enable a more comprehensive evaluation of aviation environmental policies. A comparison is presented between the cost-effectiveness analysis currently used for aviation environmental policy decision-making and an illustrative cost-benefit analysis. We focus on assessing a subset of the engine NO X emissions certification stringency options considered at the eighth meeting of the International Civil Aviation Organization’s Committee on Aviation Environmental Protection. The FAA Aviation environmental Portfolio Management Tool (APMT) is employed to conduct the policy assessments. We show that different conclusions may be drawn about the same policy options depending on whether benefits and interdependencies are estimated in terms of health and welfare impacts versus changes in NO X emissions inventories as is the typical practice. We also show that these conclusions are sensitive to a variety of modeling uncertainties. While our more comprehensive analysis makes the best policy option less clear, it represents a more accurate characterization of the scientific and economic uncertainties underlying impacts and the policy choices.

IMPROVING ALTERNATIVES FOR ENVIRONMENTAL IMPACT ASSESSMENT. (R825758)

EPA Science Inventory

Environmental impact assessment (EIA), in the US, requires an objective and rigorous analysis of alternatives. Yet the choice of alternatives for that analysis can be subjective and arbitrary. Alternatives often reflect narrow project objectives, agency agendas, and predilecti...

HISTORICAL ANALYSIS OF ECOLOGICAL EFFECTS: A USEFUL EDUCATIONAL TOOL

EPA Science Inventory

An historical analysis that presents the ecological consequences of development can be a valuable educational tool for citizens, students, and environmental managers. In highly impacted areas, the cumulative impacts of multiple stressors can result in complex environmental condit...

10 CFR 51.45 - Environmental report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... an analysis of the cumulative impacts of the activities to be authorized by the limited work... the proposed action should it be implemented. (c) Analysis. The environmental report must include an analysis that considers and balances the environmental effects of the proposed action, the environmental...

Environmental analysis of sunflower production with different forms of mineral nitrogen fertilizers.

PubMed

Spinelli, D; Bardi, L; Fierro, A; Jez, S; Basosi, R

2013-11-15

Environmental profiles of mineral nitrogen fertilizers were used to evaluate the environmental disturbances related to their use in cultivation systems in Europe. Since the production of mineral fertilizers requires a large amount of energy, the present study of bioenergy systems is relevant in order to achieve crop yields less dependent on fossil fuels and to reduce the environmental impact due to fertilization. In this study, the suitability of the LCA methodology to analyze the environmental impact of sunflower cultivation systems with different forms of mineral nitrogen fertilizers urea and ammonium nitrate was investigated. Effects on climate change were estimated by the use of Ecoinvent 2.2 database default value for soil N2O emission factor (1%) and local emission data (0.8%) of mineral nitrogen applied to soils. LCA analysis showed a higher impact on environmental categories (human health and ecosystem quality) for the system in which urea was used as a nitrogen source. Use of urea fertilizer showed a higher impact on resource consumption due to fossil fuel consumption. Use of mineral nitrogen fertilizers showed a higher environmental burden than other inputs required for sunflower cultivation systems under study. Urea and ammonium nitrate showed, respectively, a 7.8% and 4.9% reduced impact of N2O as greenhouse gas by using direct field data of soil N2O emission factor compared to the default soil emission factor of 2006 IPCC Guidelines. Use of ammonium nitrate as mineral nitrogen fertilizer in sunflower cultivation would have a lower impact on environmental categories considered. Further environmental analysis of available technologies for fertilizer production might be also evaluated in order to reduce the environmental impacts of each fertilizer. Copyright © 2013 Elsevier Ltd. All rights reserved.

75 FR 38768 - Ashley National Forest, UT, High Uintas Wilderness-Colorado River Cutthroat Trout Habitat...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-06

... to prepare an environmental impact statement. SUMMARY: The Ashley National Forest in cooperation with... analysis must be received by August 5, 2010. The draft environmental impact statement is expected February 2011 and the final environmental impact statement is expected June 2011. ADDRESSES: Send written...

77 FR 33237 - Saline Valley Warm Springs Management Plan/Environmental Impact Statement, Death Valley National...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-05

... Valley Warm Springs Management Plan/Environmental Impact Statement, Death Valley National Park, Inyo... an Environmental Impact Statement for the Saline Valley Warm Springs Management Plan, Death Valley... analysis process for the Saline Valley Warm Springs Management Plan for Death Valley [[Page 33238...

76 FR 51358 - National Nuclear Security Administration Amended Record of Decision: Disposition of Surplus...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

...: Disposition of Surplus Highly Enriched Uranium Environmental Impact Statement AGENCY: National Nuclear... decision at that time. The Supplement Analysis analyzed the potential environmental impacts associated with... radioactive waste (LLW). The HEU EIS evaluated the potential environmental impacts of down- blending at up to...

Effect of replacement of tin doped indium oxide (ITO) by ZnO: analysis of environmental impact categories

NASA Astrophysics Data System (ADS)

Ziemińska-Stolarska, Aleksandra; Barecka, Magda; Zbiciński, Ireneusz

2017-10-01

Abundant use of natural resources is doubtlessly one of the greatest challenges of sustainable development. Process alternatives, which enable sustainable manufacturing of valuable products from more accessible resources, are consequently required. One of examples of limited resources is Indium, currently broadly used for tin doped indium oxide (ITO) for production of transparent conductive films (TCO) in electronics industry. Therefore, candidates for Indium replacement, which would offer as good performance as the industrial state-of-the-art technology based on ITO are widely studied. However, the environmental impact of new layers remains unknown. Hence, this paper studies the environmental effect of ITO replacement by zinc oxide (ZnO) by means life cycle assessment (LCA) methodology. The analysis enables to quantify the environmental impact over the entire period of life cycle of products—during manufacturing, use phase and waste generation. The analysis was based on experimental data for deposition process. Further, analysis of different impact categories was performed in order to determine specific environmental effects related to technology change. What results from the analysis, is that ZnO is a robust alternative material for ITO replacement regarding environmental load and energy efficiency of deposition process which is also crucial for sustainable TCO layer production.

10 CFR 503.13 - Environmental impact analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Environmental impact analysis. 503.13 Section 503.13 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Requirements for... Zone Management Act, Safe Drinking Water Act, Resource Conservation and Recovery Act; and (2...

10 CFR 503.13 - Environmental impact analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impact analysis. 503.13 Section 503.13 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Requirements for... Zone Management Act, Safe Drinking Water Act, Resource Conservation and Recovery Act; and (2...

10 CFR 503.13 - Environmental impact analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Environmental impact analysis. 503.13 Section 503.13 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Requirements for... Zone Management Act, Safe Drinking Water Act, Resource Conservation and Recovery Act; and (2...

10 CFR 503.13 - Environmental impact analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Environmental impact analysis. 503.13 Section 503.13 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Requirements for... Zone Management Act, Safe Drinking Water Act, Resource Conservation and Recovery Act; and (2...

10 CFR 503.13 - Environmental impact analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Environmental impact analysis. 503.13 Section 503.13 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Requirements for... Zone Management Act, Safe Drinking Water Act, Resource Conservation and Recovery Act; and (2...

M-X Environmental Technical Report. Socioeconomic Impact Estimates for White Pine County, Nevada. Detailed Tables.

DTIC Science & Technology

1980-12-22

8217AP0A095 772 HENNINGSON DURHAM AND RICHARDSON SANTA BARBARA CA F/G 16/1 B-B ENVIRONMENTAL TECHNICAL REPORT. SOCIOECONOMIC IMPACT ESTIMA--ETC(U) DEC... Environmental Technical Reports,. 53ocioeconctnic’ Final r1eport Impact . Estimates for White Pine County, Nevada. ____________ Detailed Tables 6. PERFORMING...background information for the analysis contained in the M-X Deploment Area Selection and Land Withirawal/Acquisition Draft Environmental Impact Statement

An evaluation paradigm for cumulative impact analysis

NASA Astrophysics Data System (ADS)

Stakhiv, Eugene Z.

1988-09-01

Cumulative impact analysis is examined from a conceptual decision-making perspective, focusing on its implicit and explicit purposes as suggested within the policy and procedures for environmental impact analysis of the National Environmental Policy Act of 1969 (NEPA) and its implementing regulations. In this article it is also linked to different evaluation and decision-making conventions, contrasting a regulatory context with a comprehensive planning framework. The specific problems that make the application of cumulative impact analysis a virtually intractable evaluation requirement are discussed in connection with the federal regulation of wetlands uses. The relatively familiar US Army Corps of Engineers' (the Corps) permit program, in conjunction with the Environmental Protection Agency's (EPA) responsibilities in managing its share of the Section 404 regulatory program requirements, is used throughout as the realistic context for highlighting certain pragmatic evaluation aspects of cumulative impact assessment. To understand the purposes of cumulative impact analysis (CIA), a key distinction must be made between the implied comprehensive and multiobjective evaluation purposes of CIA, promoted through the principles and policies contained in NEPA, and the more commonly conducted and limited assessment of cumulative effects (ACE), which focuses largely on the ecological effects of human actions. Based on current evaluation practices within the Corps' and EPA's permit programs, it is shown that the commonly used screening approach to regulating wetlands uses is not compatible with the purposes of CIA, nor is the environmental impact statement (EIS) an appropriate vehicle for evaluating the variety of objectives and trade-offs needed as part of CIA. A heuristic model that incorporates the basic elements of CIA is developed, including the idea of trade-offs among social, economic, and environmental protection goals carried out within the context of environmental carrying capacity.

A methodology for the environmental assessment of advanced coal extraction systems

NASA Technical Reports Server (NTRS)

Sullivan, P. J.; Hutchinson, C. F.; Makihara, J.; Evensizer, J.

1980-01-01

Procedures developed to identify and assess potential environment impacts of advanced mining technology as it moves from a generic concept to a more systems definition are described. Two levels of assessment are defined in terms of the design stage of the technology being evaluated. The first level of analysis is appropriate to a conceptual design. At this level it is assumed that each mining process has known and potential environmental impacts that are generic to each mining activity. By using this assumption, potential environmental impacts can be identified for new mining systems. When two or more systems have been assessed, they can be evaluated comparing potential environmental impacts. At the preliminary stage of design, a systems performance can be assessed again with more precision. At this level of systems definition, potential environmental impacts can be analyzed and their significane determined in a manner to facilitate comparisons between systems. At each level of analysis, suggestions calculated to help the designer mitigate potentially harmful impacts are provided.

Data Call Response for NEPA Supplement Analysis of CMRR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Booth, Steven Richard

The Department of Energy/National Nuclear Security Administration (DOE/NNSA) is proposing to provide analytical chemistry (AC) and materials characterization (MC) capabilities at the Los Alamos National Laboratory (LANL) by using a combination of existing space in two existing buildings: the Radiological Laboratory/Utility/Office Building (RLUOB) and the Plutonium Facility, Building 4 (PF-4) in TA-55. This represents a change from decisions made by DOE as informed by previous National Environmental Policy Act (NEPA) analyses. In accordance with Council on Environmental Quality (CEQ) and DOE requirements, NNSA is preparing a Supplement Analysis (SA) to evaluate the potential environmental impacts of the proposed action. Themore » focus of this analysis is on determining whether the proposal to provide AC and MC laboratory capabilities in existing space in RLUOB and PF-4 rather than building a new nuclear facility (NF) is a substantial change that is relevant to environmental concerns or whether new circumstance or information relevant to environmental concerns and bearing on the proposed action or its impacts are significant. The end result of the analysis is a determination whether the existing Chemistry and Metallurgy Research Building Replacement Environmental Impact Statement (CMRR EIS) should be supplemented, a new EIS should be prepared, or no further NEPA analysis is necessary. This report provides data for incorporation into the Supplement Analysis being written by Leidos, Inc. under contract to NNSA. Responding to the data call requires several areas of expertise. Los Alamos subject matter experts estimate equipments lists, facility modifications, waste quantities, labor needs and radiological doses. Los Alamos NEPA experts assist Leidos in compiling existing data from the LANL Site-Wide Environmental Impact Statement (SWEIS) and CMRR EIS for public and other impacts. Bounding conditions are used to determine NEPA estimates.« less

32 CFR 651.41 - Conditions requiring an EIS.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.41... of hazardous or toxic materials that may have significant environmental impact. (i) Be highly... 32 National Defense 4 2014-07-01 2013-07-01 true Conditions requiring an EIS. 651.41 Section 651...

32 CFR 651.41 - Conditions requiring an EIS.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.41... of hazardous or toxic materials that may have significant environmental impact. (i) Be highly... 32 National Defense 4 2012-07-01 2011-07-01 true Conditions requiring an EIS. 651.41 Section 651...

32 CFR 651.41 - Conditions requiring an EIS.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.41... of hazardous or toxic materials that may have significant environmental impact. (i) Be highly... 32 National Defense 4 2013-07-01 2013-07-01 false Conditions requiring an EIS. 651.41 Section 651...

32 CFR 651.45 - Steps in preparing and processing an EIS.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technical analyses are balanced with environmental analysis, the agency preferred alternative will not...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.45... alternatives based on relevant factors including environmental, economic, and technical considerations and...

49 CFR 1152.60 - Special rules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... concerning environmental issues may be directed to the Board's Section of Environmental Analysis. An environmental assessment (EA) (or environmental impact statement (EIS), if necessary) prepared by the Section of Environmental Analysis will be served upon all parties of record and upon any agencies or other persons who...

Draft Environmental Impact Statement. MX Deployment Area Selection and Land Withdrawal/Acquisition DEIS. Volume IV. Part I. Environmental Consequences to the Study Regions and Operating Base Vicinities.

DTIC Science & Technology

1980-12-01

consequences such that the ecosystem will not recover at all, (7) are the consequences such that the impact may be large but the recovery process...Bswe $Vicinitoe MLWI Impact Analysis Process DEPLOYMENT AREA SELECTION AND LAND WITHDRAWAL/ ACQUISITION DISI, DEPARTMENT OF THE AmR F1ORC ’oritinax...Subtitle) S. TYPE OF REPORT & PERIOD COVEREDDraft Environmental Impact Statement-MX Deployment Area Selection-Environmental Draft-December 80 Consequences

30 CFR 250.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

Code of Federal Regulations, 2011 CFR

2011-07-01

... analysis (EIA) information must accompany the DPP or DOCD? The following EIA information must accompany... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What environmental impact analysis (EIA) information must accompany the DPP or DOCD? 250.261 Section 250.261 Mineral Resources BUREAU OF OCEAN ENERGY...

Assessment of environmental impacts part one. Intervention analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hipel, Keith William; Lettenmaier, Dennis P.; McLeod, A. Ian

The use of intervention analysis as a statistical method of gauging the effects of environmental changes is discussed. The Box-Jenkins model, serves as the basis for the intervention analysis methodology. Environmental studies of the Aswan Dam, the South Saskatchewan River, and a forest fire near the Pipers Hole River, Canada, are included as case studies in which intervention analysis was employed. Methods of data collection for intervention analysis are found to have a significant impact on model reliability; effective data collection processes for the Box-Jenkins model are provided. (15 graphs, 27 references, 2 tables)

Hydrologic Engineering Center River Analysis System (HEC-RAS) Water Temperature Models Developed for the Missouri River Recovery Management Plan and Environmental Impact Statement

DTIC Science & Technology

2017-09-18

Temperature Models Developed for the Missouri River Recovery Management Plan and Environmental Impact Statement En vi ro nm en ta l L ab or at or y...Engineering Center-River Analysis System (HEC-RAS) Water Temperature Models Developed for the Missouri River Recovery Management Plan and Environmental...Prepared for U.S. Army Corps of Engineers Washington, DC 20314-1000 Under Project 396939, “Missouri River Recovery Management Plan and Environmental

Turning stumbling blocks into stepping stones in the analysis of cumulative impacts

Treesearch

Leslie M. Reid

2004-01-01

Federal and state legislation, such as the National Environmental Policy Act and the California Environmental Quality Act, require that responsible agency staff consider the cumulative impacts of proposed activities before permits are issued for certain kinds of public or private projects. The Council on Environmental Quality (CEQ 1997) defined a cumulative impact as...

77 FR 62528 - Termination of Environmental Impact Statement for the General Management Plan, Mount Rushmore...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-15

... environmental impact statement (EIS) for the Mount Rushmore National Memorial General Management Plan (GMP) and will be preparing an Environmental Assessment (EA) instead. DATES: The draft GMP EA is expected to be... the appropriate level of environmental documentation for the GMP. Preliminary analysis of alternatives...

75 FR 27372 - University of New Mexico; University of New Mexico AGN-201M Reactor; Environmental Assessment and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... is housed in the Nuclear Energy Laboratory (NEL) located near the southwest corner of the University.... Therefore, license renewal should not change the environmental impact of facility operation. Data from the... analysis of human health and environmental impacts presented in this environmental assessment, the proposed...

Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

DTIC Science & Technology

2007-05-01

BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...8217\\ \\ \\ \\ \\\\ \\ ~ >(- \\ , ~ AOC01 \\ PS018 / WP002 \\ DP008 // WP006 \\ ~ ,/ ’----- -----·-------------~--/·/ LAUGHLIN AIR FORCE BASE ENVIROMENTAL RESTORATION

76 FR 23335 - Wilderness Stewardship Plan/Environmental Impact Statement, Sequoia and Kings Canyon National...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-26

... planning and environmental impact analysis process required to inform consideration of alternative... 5, 1996. Based on an analysis of the numerous scoping comments received, and with consideration of a... proper food storage; party size; camping and campsites; human waste management; stock use; meadow...

32 CFR 989.25 - Base closure and realignment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.25 Base closure and realignment. Base closure or realignment may entail special requirements for environmental analysis. The permanent base closure... frequently contain provisions limiting the extent of environmental analysis required for actions taken under...

32 CFR 989.25 - Base closure and realignment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.25 Base closure and realignment. Base closure or realignment may entail special requirements for environmental analysis. The permanent base closure... frequently contain provisions limiting the extent of environmental analysis required for actions taken under...

78 FR 50026 - Energy Efficiency and Conservation Loan Program Finding of No Significant Impact

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... impact analysis documented in a programmatic environmental assessment of the new program that was issued... environment. Therefore, RUS will not prepare an environmental impact statement for its rulemaking adding... Finding of No Significant Impact AGENCY: Rural Utilities Service, USDA. ACTION: Notice of availability of...

77 FR 47337 - Project-Level Predecisional Administrative Review Process

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-08

... upholding environmental standards and encouraging early public input during planning processes. One of the... when they are categorically excluded from analysis under the National Environmental Policy Act (NEPA... applicable to projects and activities evaluated in an environmental analysis (EA) or environmental impact...

Ocean Thermal Energy Conversion (OTEC) Programmatic Environmental Analysis--Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Authors, Various

1980-01-01

The programmatic environmental analysis is an initial assessment of Ocean Thermal Energy Conversion (OTEC) technology considering development, demonstration and commercialization. It is concluded that the OTEC development program should continue because the development, demonstration, and commercialization on a single-plant deployment basis should not present significant environmental impacts. However, several areas within the OTEC program require further investigation in order to assess the potential for environmental impacts from OTEC operation, particularly in large-scale deployments and in defining alternatives to closed-cycle biofouling control: (1) Larger-scale deployments of OTEC clusters or parks require further investigations in order to assess optimal platform siting distancesmore » necessary to minimize adverse environmental impacts. (2) The deployment and operation of the preoperational platform (OTEC-1) and future demonstration platforms must be carefully monitored to refine environmental assessment predictions, and to provide design modifications which may mitigate or reduce environmental impacts for larger-scale operations. These platforms will provide a valuable opportunity to fully evaluate the intake and discharge configurations, biofouling control methods, and both short-term and long-term environmental effects associated with platform operations. (3) Successful development of OTEC technology to use the maximal resource capabilities and to minimize environmental effects will require a concerted environmental management program, encompassing many different disciplines and environmental specialties. This volume contains these appendices: Appendix A -- Deployment Scenario; Appendix B -- OTEC Regional Characterization; and Appendix C -- Impact and Related Calculations.« less

36 CFR 297.6 - Environmental analysis requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... WILD AND SCENIC RIVERS Water Resources Projects § 297.6 Environmental analysis requirements. (a) The determination of the effects of a proposed water resources project shall be made in compliance with the National... environmental studies, assessments, or environmental impact statements prepared for a water resources project...

36 CFR 297.6 - Environmental analysis requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... WILD AND SCENIC RIVERS Water Resources Projects § 297.6 Environmental analysis requirements. (a) The determination of the effects of a proposed water resources project shall be made in compliance with the National... environmental studies, assessments, or environmental impact statements prepared for a water resources project...

36 CFR 297.6 - Environmental analysis requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... WILD AND SCENIC RIVERS Water Resources Projects § 297.6 Environmental analysis requirements. (a) The determination of the effects of a proposed water resources project shall be made in compliance with the National... environmental studies, assessments, or environmental impact statements prepared for a water resources project...

36 CFR 297.6 - Environmental analysis requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... WILD AND SCENIC RIVERS Water Resources Projects § 297.6 Environmental analysis requirements. (a) The determination of the effects of a proposed water resources project shall be made in compliance with the National... environmental studies, assessments, or environmental impact statements prepared for a water resources project...

36 CFR 297.6 - Environmental analysis requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... WILD AND SCENIC RIVERS Water Resources Projects § 297.6 Environmental analysis requirements. (a) The determination of the effects of a proposed water resources project shall be made in compliance with the National... environmental studies, assessments, or environmental impact statements prepared for a water resources project...

76 FR 30303 - Tongass National Forest; Alaska; Bell Island Geothermal Leases Supplemental Environmental Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

...The U.S. Department of Agriculture, Forest Service, Tongass National Forest will prepare a supplemental environmental impact statement (SEIS) to a 2008 programmatic environmental impact statement (PEIS) titled Geothermal Leasing in the Western United States. This analysis is needed for consent determination to allow the Bureau of Land Management (BLM) to issue three pending leases to a private geothermal developer. These leases encompass much of Bell Island and a portion of the Cleveland Peninsula on the adjacent mainland in the Alexander Archipelago of Southeast Alaska. The agency invites comments and suggestions on the scope of the analysis to be included in the draft SEIS. In addition, the agency gives notice of this environmental analysis and decision making process so that interested and affected people know how they may participate and contribute to the final decision.

78 FR 19444 - Pawnee National Grassland, Colorado; Oil and Gas Leasing Analysis Environmental Impact Statement

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... horizontal drilling and hydraulic fracturing technologies to improve the ability to access and recover oil... National Grassland, Colorado; Oil and Gas Leasing Analysis Environmental Impact Statement AGENCY: Forest... (ROD) for the Revision of the Land and Resource Management Plan (LRMP), which included the Oil and Gas...

Santa Rosa Island Mission Utilization Plan Programmatic Environmental Assessment

DTIC Science & Technology

2005-03-01

subject areas with the greatest likelihood for potential environmental impacts. In each case, the assessment found that the preferred alternative would...7061, "The Environmental Impact Analysis Process"). Selection of Alternative 3, the preferred alternative, of the Santa Rosa Island Mission... Preferred Alternative ...............................................................................................................................2-12

OCEAN THERMAL ENERGY CONVERSION (OTEC) PROGRAMMATIC ENVIRONMENTAL ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sands, M. D.

1980-01-01

This programmatic environmental analysis is an initial assessment of OTEC technology considering development, demonstration and commercialization; it is concluded that the OTEC development program should continue because the development, demonstration, and commercialization on a single-plant deployment basis should not present significant environmental impacts. However, several areas within the OTEC program require further investigation in order to assess the potential for environmental impacts from OTEC operation, particularly in large-scale deployments and in defining alternatives to closed-cycle biofouling control: (1) Larger-scale deployments of OTEC clusters or parks require further investigations in order to assess optimal platform siting distances necessary to minimize adversemore » environmental impacts. (2) The deployment and operation of the preoperational platform (OTEC-1) and future demonstration platforms must be carefully monitored to refine environmental assessment predictions, and to provide design modifications which may mitigate or reduce environmental impacts for larger-scale operations. These platforms will provide a valuable opportunity to fully evaluate the intake and discharge configurations, biofouling control methods, and both short-term and long-term environmental effects associated with platform operations. (3) Successful development of OTEC technology to use the maximal resource capabilities and to minimize environmental effects will require a concerted environmental management program, encompassing many different disciplines and environmental specialties.« less

Occidental Geothermal, Inc. , Oxy geothermal power plant No. 1. Final environmental impact report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-12-01

The project-specific environmental analysis covers the following: geology, soils, water resources, biology, air quality, noise, waste management, health, safety, transportation, energy and material resources, cultural resources, socioeconomics, public services, land use, and aesthetics. Other topics covered are: the cumulative envionmental analysis; unavoidable significant adverse environmental effects; irreversible environmental changes and irretrievable commitments of energy and materials; the relationship between local short-term uses of man's environment and the maintenance and enhancement of long-term productivity; growth-inducing impacts; and alternatives to the proposed action. (MHR)

Beyond Box Checking: Toward Sound Environmental Justice Analyses for Informed Decision-Making and Meaningful Tribal Consultation

NASA Astrophysics Data System (ADS)

Emanuel, R. E.; Rivers, L., III; Blank, G. B.

2017-12-01

Environmental justice analyses are mandatory components of federal environmental reviews in the United States. They are intended to help regulators and developers identify and address disproportionate impacts on poor and/or minority populations. In many cases, however, environmental justice analyses are treated as "box checking" exercises that employ weak or flawed designs unable to detect disparate impacts on vulnerable populations. We use a recent example of an environmental review led by the Federal Energy Regulatory Commission to demonstrate how flawed analyses mask disproportionate impacts on poor and/or minority populations. In this case, regulators conducted a flawed environmental justice analysis for the proposed Atlantic Coast Pipeline concluding no disproportionate impacts on vulnerable populations. We reanalyze data from the project's environmental impact statement and provide a more accurate assessment of impacts on Native Americans in North Carolina. Specifically, we show that Native Americans make up a disproportionately large fraction of residents along the proposed pipeline route (13.2%) compared to their representation in the affected counties (6.2%) or in the state at large (1.2%). We discuss implications of the original, flawed analysis for tribes representing nearly 30,000 Native Americans along the project route, and we discuss efforts by affected tribes to have their unique perspectives incorporated into the decision-making process. We conclude with general recommendations for designing environmental justice analyses that serve as useful tools to guide environmental decision-making and consultation with affected groups.

Value of Statistical Life Analysis and Environmental Policy: A White Paper with Appendices for Presentation to Science Advisory Board - Environmental Economics Advisory Committee (2004)

EPA Pesticide Factsheets

The report considers information available in the late 1990s on the economic impacts of environmental regulations on the overall economic conditions in the US, including impacts on economic growth and competitiveness.

Geomorphological hazards and environmental impact: Assessment and mapping

NASA Astrophysics Data System (ADS)

Panizza, Mario

In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

Evaluation of comprehensive environmental effect about coastal zone development activities in Liaoning Province and management advice.

PubMed

Wang, Wei-Wei; Cai, Yue-Yin; Sun, Yong-Guang; Ma, Hong-Wei

2015-07-01

Using spatial analysis function of Arcgis software, the present study investigated the building environment impact evaluation index system of coastal development in Liaoning Province. The factors of it included of current state of environmental quality, environmental impact of marine development and marine environmental disaster. Weighted factor analysis and comprehensive index method were utilized. At the end, comprehensive environment effect of coastal development in Liaoning Province were evaluated successfully. The result showed that the environmental effect of development activity were most serious, along the Zhao Jiatun coast in north of Zhimao bay and coast of Mianhua island in Dalian bay.

Total environmental impacts of biofuels from corn stover using a hybrid life cycle assessment model combining process life cycle assessment and economic input-output life cycle assessment.

PubMed

Liu, Changqi; Huang, Yaji; Wang, Xinye; Tai, Yang; Liu, Lingqin; Liu, Hao

2018-01-01

Studies on the environmental analysis of biofuels by fast pyrolysis and hydroprocessing (BFPH) have so far focused only on the environmental impacts from direct emissions and have included few indirect emissions. The influence of ignoring some indirect emissions on the environmental performance of BFPH has not been well investigated and hence is not really understood. In addition, in order to avoid shifting environmental problems from one medium to another, a comprehensive assessment of environmental impacts caused by the processes must quantify the environmental emissions to all media (air, water, and land) in relation to each life cycle stage. A well-to-wheels assessment of the total environmental impacts resulting from direct emissions and indirect emissions of a BFPH system with corn stover is conducted using a hybrid life cycle assessment (LCA) model combining the economic input-output LCA and the process LCA. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) has been used to estimate the environmental impacts in terms of acidification, eutrophication, global climate change, ozone depletion, human health criteria, photochemical smog formation, ecotoxicity, human health cancer, and human health noncancer caused by 1 MJ biofuel production. Taking account of all the indirect greenhouse gas (GHG) emissions, the net GHG emissions (81.8 g CO 2 eq/MJ) of the biofuels are still less than those of petroleum-based fuels (94 g CO 2 eq/MJ). Maize production and pyrolysis and hydroprocessing make major contributions to all impact categories except the human health criteria. All impact categories resulting from indirect emissions except eutrophication and smog air make more than 24% contribution to the total environmental impacts. Therefore, the indirect emissions are important and cannot be ignored. Sensitivity analysis has shown that corn stover yield and bio-oil yield affect the total environmental impacts of the biofuels more significantly than the biomass transportation distance and biofuel transportation distance. Integr Environ Assess Manag 2018;14:139-149. © 2017 SETAC. © 2017 SETAC.

Nanoparticles and capillary electrophoresis: A marriage with environmental impact.

PubMed

Mebert, Andrea Mathilde; Tuttolomondo, Maria Victoria; Echazú, Maria Inés Alvarez; Foglia, Maria Lucia; Alvarez, Gisela Solange; Vescina, María Cristina; Santo-Orihuela, Pablo Luis; Desimone, Martín Federico

2016-08-01

The impact of nanomaterials in the environment and human health is a cause of big concern and even though intensive studies are currently being carried out, there is still a lot to elucidate. The development of validated methods for the characterization and quantification of nanomaterials and their impact on the environment should be encouraged to achieve a proper, safe, and sustainable use of nanoparticles (NPs). Recently, CE emerged as a well-adapted technique for the analysis of environmental samples. This review presents the application of NPs together with CE systems for environmental pollutants analysis, as well as the application of CE techniques for the analysis of various types of NPs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Final environmental impact statement for the Galileo Mission (Tier 2)

NASA Technical Reports Server (NTRS)

1989-01-01

This Final Environmental Impact Statement (FEIS) addresses the proposed action of completing the preparation and operation of the Galileo spacecraft, including its planned launch on the Space Transportation System (STS) Shuttle in October 1989, and the alternative of canceling further work on the mission. The only expected environmental effects of the proposed action are associated with normal launch vehicle operation, and are treated in published National Environmental Policy Act (NEPA) documents on the Shuttle (NASA 1978) and the Kennedy Space Center (NASA 1979), and in the KSC Environmental Resources Document (NASA 1986) and the Galileo Tier 1 EIS (NASA 1988a). The environmental impacts of a normal launch were deemed insufficient to preclude Shuttle operations. Environmental impacts may also result from launch or mission accidents that could release plutonium fuel used in the Galileo power system. Intensive analysis of the possible accidents associated with the proposed action reveal small health or environmental risks. There are no environmental impacts in the no-action alternative. The remote possibility of environmental impacts of the proposed action must be weighed against the large adverse fiscal and programmatic impacts inherent in the no-action alternative.

Can Parasites Really Reveal Environmental Impact?

EPA Science Inventory

This review assesses the usefulness of parasites as bioindicators of environmental impact. Relevant studies published in the past decade were compiled; factorial meta-analysis demonstrated significant effects and interactions between parasite levels and the presence and concentra...

Comparing Distributions of Environmental Outcomes for Regulatory Environmental Justice Analysis

PubMed Central

Maguire, Kelly; Sheriff, Glenn

2011-01-01

Economists have long been interested in measuring distributional impacts of policy interventions. As environmental justice (EJ) emerged as an ethical issue in the 1970s, the academic literature has provided statistical analyses of the incidence and causes of various environmental outcomes as they relate to race, income, and other demographic variables. In the context of regulatory impacts, however, there is a lack of consensus regarding what information is relevant for EJ analysis, and how best to present it. This paper helps frame the discussion by suggesting a set of questions fundamental to regulatory EJ analysis, reviewing past approaches to quantifying distributional equity, and discussing the potential for adapting existing tools to the regulatory context. PMID:21655146

Environmental justice and U.S. Forest Service hazardous fuels reduction: A spatial method for impact assessment of federal resource management actions

Treesearch

Mark D.O. Adams; Susan Charnley

2018-01-01

Natural resource managers of federal lands in the USA are often tasked with various forms of social and economic impact analysis. Federal agencies in the USA also have a mandate to analyze the potential environmental justice consequences of their activities. Relatively little is known about the environmental justice impacts of natural resource management in rural areas...

Environmental Impact Analysis Process. Supplement to Final Environmental Impact Statement Space Shuttle Program, Vandenberg AFB, California

DTIC Science & Technology

1983-07-01

problems . Six appendices offer more detailed environmental assessments for the key issues of air quality impacts, inadvertent weather modification...research studies in problem areas, and newly- acquired knowledge of the affected environment. The physical, chemi- cal, biological, and...Shuttle program, in conjunction with other projects within the county, will aggravate short-tenm problems concerning housing, and the quality and quantity

Organization environmental footprint applying a multi-regional input-output analysis: A case study of a wood parquet company in Spain.

PubMed

Martinez, Sara; Marchamalo, Miguel; Alvarez, Sergio

2018-03-15

Wood has been presented as a carbon-neutral material capable of significantly contribute to climate change mitigation and has become an appealing option for the building sector. This paper presents the quantification of the organization environmental footprint of a wood parquet company. The multi-regional input-output (MRIO) database EXIOBASE was used with a further structural path analysis decomposition. The application of the proposed method quantifies 14 environmental impacts. Highly influential sectors and regions responsible for these impacts are assessed to propose efficient measures. For the parquet company studied, the highest impact category once normalized was ozone depletion and the dominant sector responsible for this impact was the chemical industry from Spain and China. The structural path decomposition related to ozone loss revealed that the indirect impacts embedded in the supply chain are higher than the direct impacts. It can be concluded that the assessment of the organizational environmental footprint can be carried out applying this well-structured and robust method. Its implementation will enable tracking of the environmental burdens through a company's supply chain at a global scale and provide information for the adoption of environmental strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

Assessment of potential economic and environmental impacts caused by Phytophthora ramorum in Europe

Treesearch

Hella Kehlenbeck

2008-01-01

Economic and environmental impacts of Phytophthora ramorum in Europe were evaluated within the European Union framework 6 project on ?Risk Analysis for P. ramorum a pathogen threat to Europe? (RAPRA). Impact assessment was conducted according to three different scenarios: 1. ?Nursery System? - describes losses occurring in...

Controlling for exogenous environmental variables when using data envelopment analysis for regional environmental assessments.

PubMed

Macpherson, Alexander J; Principe, Peter P; Shao, Yang

2013-04-15

Researchers are increasingly using data envelopment analysis (DEA) to examine the efficiency of environmental policies and resource allocations. An assumption of the basic DEA model is that decisionmakers operate within homogeneous environments. But, this assumption is not valid when environmental performance is influenced by variables beyond managerial control. Understanding the influence of these variables is important to distinguish between characterizing environmental conditions and identifying opportunities to improve environmental performance. While environmental assessments often focus on characterizing conditions, the point of using DEA is to identify opportunities to improve environmental performance and thereby prevent (or rectify) an inefficient allocation of resources. We examine the role of exogenous variables such as climate, hydrology, and topography in producing environmental impacts such as deposition, runoff, invasive species, and forest fragmentation within the United States Mid-Atlantic region. We apply a four-stage procedure to adjust environmental impacts in a DEA model that seeks to minimize environmental impacts while obtaining given levels of socioeconomic outcomes. The approach creates a performance index that bundles multiple indicators while adjusting for variables that are outside management control, offering numerous advantages for environmental assessment. Published by Elsevier Ltd.

Expansion of environmental impact assessment for eco-efficiency evaluation of China's economic sectors: An economic input-output based frontier approach.

PubMed

Xing, Zhencheng; Wang, Jigan; Zhang, Jie

2018-09-01

Due to the increasing environmental burdens caused by dramatic economic expansion, eco-efficiency indicating how efficient the economic activity is with respect to its environmental impacts has become a topic of considerable interest in China. In this context, Economic Input-output Life Cycle Assessment (EIO-LCA) and Data Envelopment Analysis (DEA) are combined to assess the environmental impacts and eco-efficiency of China's 26 economic sectors. The EIO-LCA results indicate that Electricity Production and Supply sector is the largest net exporter in energy usage, CO 2 emission and exhaust emission categories, while Construction sector is the largest net importer for five impact categories except for water withdrawal. Moreover, Construction sector is found to be the destination of the largest sector-to-sector environmental impact flows for the five impact categories and make the most contributions to the total environmental impacts. Another key finding is that Agriculture sector is both the largest net exporter and the greatest contributor for water withdrawal category. DEA results indicate that seven sectors are eco-efficient while over 70% of China's economic sectors are inefficient and require significant improvements. The average target improvements range between 23.30% and 35.06% depending on the impact category. Further sensitivity analysis reveals that the average sensitivity ratios vary from 7.7% to 15.7% among the six impact categories, which are found to be negatively correlated with their improvement potentials. Finally, several policy recommendations are made to mitigate environmental impacts of China's economic sectors and improve their eco-efficiency levels. Copyright © 2018 Elsevier B.V. All rights reserved.

Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

NASA Astrophysics Data System (ADS)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

A critical review of environmental impact statements in Sri Lanka with particular reference to ecological impact assessment.

PubMed

Samarakoon, Miriya; Rowan, John S

2008-03-01

This article critically reviews environmental assessment (EA) practices in Sri Lanka, with a particular focus on ecology. An overview is provided of the domestic and international influences which have shaped the administrative process which is currently a two-tiered scheme. An Initial Environmental Examination (IEE) provides a preliminary screening tool, prior to the requirement for a full Environmental Impact Assessment (EIA). A comprehensive survey of Sri Lankan national archives showed that 463 EAs were completed in the period 1981-2005, with the bulk of these in the more populated Western and North Western Provinces. Two-thirds were IEE surveys, while the remaining third advanced to full EIA. A representative sample of 130 EAs (both IEEs and full EIAs) spanning a broad range of project types, scales, and environmental settings was selected to evaluate the quality of the ecological investigations within the published environmental impact statements (EISs). These were assigned into five classes of "explanatory power", on the basis of their scientific content in relation to survey, analysis, and reporting of ecological interests. Within most EISs, the ecological impact assessment (EcIA) was restricted to the lowest two categories of ecological assessment, i.e., tokenistic presentation of reconnaissance-level species lists without further analysis of the development implications for individual organisms or communities. None of the assessments reviewed provided statistically rigorous analysis, which would be required if ecological impact studies are to include quantitative and testable predictions of impact, which could then be followed up by appropriate post-impact monitoring programs. Attention to key local issues such as biodiversity or ecosystem services, which also have strong social dimensions in the developing world, was also notably underrepresented. It was thus concluded that despite the existence of a sound legislative framework in Sri Lanka, the analysis contained within EISs generally fails to convey meaningful information to the relevant stakeholders and decision makers involved in protecting ecological interests and promoting sustainable development. The introduction of strategic environmental assessment (SEA) is considered an important tool to strengthen the institutional capacity of Sri Lankan government to implement current regulations and, in particular, to combat the cumulative effects of incremental development.

Effects of Place Identity, Place Dependence, and Experience-Use History on Perceptions of Recreation Impacts in a Natural Setting

NASA Astrophysics Data System (ADS)

White, Dave D.; Virden, Randy J.; van Riper, Carena J.

2008-10-01

It is generally accepted that recreation use in natural environments results in some degree of negative social and environmental impact. Environmental managers are tasked with mitigating the impact while providing beneficial recreation opportunities. Research on the factors that influence visitors’ perceptions of environmental and social conditions is necessary to inform sound environmental management of protected natural areas. This study examines the effect of prior experience with the setting and two dimensions of place attachment (i.e., place identity and place dependence) on visitors’ perceptions of three types of recreation impacts (i.e., depreciative behavior, environmental impacts, and recreation conflict). Principal components analysis, confirmatory factor analysis, and structural equation modeling were used to test the study hypotheses using data collected from 351 visitors through on-site questionnaires (response rate of 93 percent). The results show that prior experience exhibited a moderate and significant direct positive effect on place identity, place dependence, and visitors’ perceptions of recreation impacts. Contrary to study hypotheses and prior research, neither place dependence nor place identity exhibited a significant effect on the dependent variables. The results show that prior experience causes visitors to be more sensitive to depreciative behaviors, environmental impacts, and recreation conflict. These findings raise concerns over potential visitor displacement and deterioration of site conditions. Implications for resource managers are discussed, which include education, modifying visitor use patterns, and site design strategies.

Effects of place identity, place dependence, and experience-use history on perceptions of recreation impacts in a natural setting.

PubMed

White, Dave D; Virden, Randy J; van Riper, Carena J

2008-10-01

It is generally accepted that recreation use in natural environments results in some degree of negative social and environmental impact. Environmental managers are tasked with mitigating the impact while providing beneficial recreation opportunities. Research on the factors that influence visitors' perceptions of environmental and social conditions is necessary to inform sound environmental management of protected natural areas. This study examines the effect of prior experience with the setting and two dimensions of place attachment (i.e., place identity and place dependence) on visitors' perceptions of three types of recreation impacts (i.e., depreciative behavior, environmental impacts, and recreation conflict). Principal components analysis, confirmatory factor analysis, and structural equation modeling were used to test the study hypotheses using data collected from 351 visitors through on-site questionnaires (response rate of 93 percent). The results show that prior experience exhibited a moderate and significant direct positive effect on place identity, place dependence, and visitors' perceptions of recreation impacts. Contrary to study hypotheses and prior research, neither place dependence nor place identity exhibited a significant effect on the dependent variables. The results show that prior experience causes visitors to be more sensitive to depreciative behaviors, environmental impacts, and recreation conflict. These findings raise concerns over potential visitor displacement and deterioration of site conditions. Implications for resource managers are discussed, which include education, modifying visitor use patterns, and site design strategies.

Assessing the environmental impact of energy production from hydrochar generated via hydrothermal carbonization of food wastes.

PubMed

Berge, Nicole D; Li, Liang; Flora, Joseph R V; Ro, Kyoung S

2015-09-01

Although there are numerous studies suggesting hydrothermal carbonization is an environmentally advantageous process for transformation of wastes to value-added products, a systems level evaluation of the environmental impacts associated with hydrothermal carbonization and subsequent hydrochar combustion has not been conducted. The specific objectives of this work are to use a life cycle assessment approach to evaluate the environmental impacts associated with the HTC of food wastes and the subsequent combustion of the generated solid product (hydrochar) for energy production, and to understand how parameters and/or components associated with food waste carbonization and subsequent hydrochar combustion influence system environmental impact. Results from this analysis indicate that HTC process water emissions and hydrochar combustion most significantly influence system environmental impact, with a net negative GWP impact resulting for all evaluated substituted energy-sources except biomass. These results illustrate the importance of electricity production from hydrochar particularly when it is used to offset coal-based energy sources. HTC process water emissions result in a net impact to the environment, indicating a need for developing appropriate management strategies. Results from this analysis also highlight a need for additional exploration of liquid and gas-phase composition, a better understanding of how changes in carbonization conditions (e.g., reaction time and temperature) influence metal and nutrient fate, and the exploration of liquid-phase treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Comparative analysis of environmental impacts of agricultural production systems, agricultural input efficiency, and food choice

NASA Astrophysics Data System (ADS)

Clark, Michael; Tilman, David

2017-06-01

Global agricultural feeds over 7 billion people, but is also a leading cause of environmental degradation. Understanding how alternative agricultural production systems, agricultural input efficiency, and food choice drive environmental degradation is necessary for reducing agriculture’s environmental impacts. A meta-analysis of life cycle assessments that includes 742 agricultural systems and over 90 unique foods produced primarily in high-input systems shows that, per unit of food, organic systems require more land, cause more eutrophication, use less energy, but emit similar greenhouse gas emissions (GHGs) as conventional systems; that grass-fed beef requires more land and emits similar GHG emissions as grain-feed beef; and that low-input aquaculture and non-trawling fisheries have much lower GHG emissions than trawling fisheries. In addition, our analyses show that increasing agricultural input efficiency (the amount of food produced per input of fertilizer or feed) would have environmental benefits for both crop and livestock systems. Further, for all environmental indicators and nutritional units examined, plant-based foods have the lowest environmental impacts; eggs, dairy, pork, poultry, non-trawling fisheries, and non-recirculating aquaculture have intermediate impacts; and ruminant meat has impacts ∼100 times those of plant-based foods. Our analyses show that dietary shifts towards low-impact foods and increases in agricultural input use efficiency would offer larger environmental benefits than would switches from conventional agricultural systems to alternatives such as organic agriculture or grass-fed beef.

78 FR 6814 - Notice of Intent to Prepare an Environmental Impact Statement for the Sacramento-San Joaquin...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-31

... an Environmental Impact Statement for the Sacramento-San Joaquin Delta Islands and Levees Feasibility... Sacramento-San Joaquin Delta Islands and Levees Feasibility Study (Delta Study). The EIS will be prepared in... environmental analysis should be received at (see ADDRESSES) by March 15, 2013. ADDRESSES: Written comments...

Dialogues between social and natural sciences: contribution to the debate on socio-environmental conflicts.

PubMed

Milanez, Bruno

2015-01-01

In this article, I argue that attempting to solve real problems is a possible approach to bring social and natural sciences together, and suggest that - as Environmental Impact Assessment necessarily brings together social and environmental issues - this debate is a strong candidate for such a task. The argument is based on a general discussion about the possibilities and limitations of Environmental Impact Assessments, the social-environmental impacts of mining activities and three case studies. The analysis of the cases indicates possibilities and limitations of the dialogue between scientists from various areas - and of the collaboration with social movements and affected communities - in avoiding negative impacts of mining projects and, eventually, increasing their sustainability.

Environmental impacts of tourism in the Gulf and the Red Sea.

PubMed

Gladstone, William; Curley, Belinda; Shokri, Mohammad Reza

2013-07-30

The Gulf and Red Sea possess diverse coastal and marine environments that support rapidly expanding mass tourism. Despite the associated environmental risks, there is no analysis of the tourism-related literature or recent analysis of impacts. Environmental issues reported in 101 publications (25 from the Gulf, 76 from the Red Sea) include 61 purported impacts (27 from the Gulf, 45 from the Red Sea). Gulf literature includes quantitative studies (68% publications) and reviews (32%), and addresses mostly land reclamation and artificial habitats. Most Gulf studies come from Iran and UAE (64%). Red Sea literature includes quantitative studies (81%) and reviews (11%), with most studies occurring in Egypt (70%). The most published topics relate to coral breakage and its management. A full account of tourism's environmental impacts is constrained by limited tourism data, confounding of impacts with other coastal developments, lack of baseline information, shifting baselines, and fragmentation of research across disciplines. Copyright © 2012 Elsevier Ltd. All rights reserved.

Assessing the influence of Environmental Impact Assessments on science and policy: an analysis of the Three Gorges Project.

PubMed

Tullos, Desiree

2009-07-01

The need to understand and minimize negative environmental outcomes associated with large dams has both contributed to and benefited from the introduction and subsequent improvements in the Environmental Impact Assessment (EIA) process. However, several limitations in the EIA process remain, including those associated with the uncertainty and significance of impact projections. These limitations are directly related to the feedback between science and policy, with information gaps in scientific understanding discovered through the EIA process contributing valuable recommendations on critical focus areas for prioritizing and funding research within the fields of ecological conservation and river engineering. This paper presents an analysis of the EIA process for the Three Gorges Project (TGP) in China as a case study for evaluating this feedback between the EIA and science and policy. For one of the best-studied public development projects in the world, this paper presents an investigation into whether patterns exist between the scientific interest (via number of publications) in environmental impacts and (a) the identification of impacts as uncertain or priority by the EIA, (b) decisions or political events associated with the dam, and (c) impact type. This analysis includes the compilation of literature on TGP, characterization of ecosystem interactions and responses to TGP through a hierarchy of impacts, coding of EIA impacts as "uncertain" impacts that require additional study and "priority" impacts that have particularly high significance, mapping of an event chronology to relate policies, institutional changes, and decisions about TGP as "events" that could influence the focus and intensity of scientific investigation, and analysis of the number of publications by impact type and order within the impact hierarchy. From these analyses, it appears that the availability and consistency of scientific information limit the accuracy of environmental impact projections. These analyses also suggest a lack of direct feedback between the EIA process and emerging science, as indicated by the failure of literature to focus on issues related to the design and management of TGP, ultimately challenging the environmental sustainability of the project. While the EIA process has enormous potential for improving both the basic sciences and the planning and sustainability of hydrodevelopment, important institutional changes need to occur for this potential to be realized. This paper concludes with recommendations about those institutional changes needed to improve the feedback between the science and policy, and ultimately the environmental sustainability, of large dams.

Environmental Assessment for Construction of a 20-Slip Boat Dock Structure MacDill AFB, Florida

DTIC Science & Technology

2008-01-01

unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 FINAL FINDING OF NO SIGNIFICANT IMPACT AND FINDING OFNO PRACTICABLE...Force Environmental Impact Analysis Process, as promulgated in 32 CFR, Part 989, the USAF conducted an assessment of the potential environmental...assessment (EA) considered all potential impacts of the proposed action and alternatives, both as solitary actions and in conjunction with other proposed

Impact of environmental justice analysis on transportation planning.

DOT National Transportation Integrated Search

2011-12-30

This report presents the findings of a study sponsored by the Georgia Department of Transportation (GDOT): Impact of Environmental Justice (EJ) on Transportation Planning. The objectives of the study were to determine the state of the practice of EJ ...

32 CFR 651.34 - EA components.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and comparison of impacts should provide sufficient analysis to reach a conclusion regarding the... ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Assessment § 651.34 EA components. EAs should be...

32 CFR 651.34 - EA components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and comparison of impacts should provide sufficient analysis to reach a conclusion regarding the... ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Assessment § 651.34 EA components. EAs should be...

Life cycle based analysis of demands and emissions for residential water-using appliances.

PubMed

Lee, Mengshan; Tansel, Berrin

2012-06-30

Environmental impacts of energy and water demand and greenhouse gas emissions from three residential water-using appliances were analyzed using life cycle assessment (LCA) based approach in collaboration of economic input-output model. This study especially focused on indirect consumption and environmental impacts from end-use/demand phase of each appliance. Water-related activities such as water supply, water heating and wastewater treatment were included in the analysis. The results showed that environmental impacts from end-use/demand phase are most significant for the water system, particularly for the energy demand for water heating (73% for clothes washer and 93% for showerheads). Reducing water/hot water consumption during the end-use/demand phase is expected to improve the overall water-related energy burden and water use sustainability. In the analysis of optimal lifespan for appliances, the estimated values (8-21 years) using energy consumption balance approach were found to be lower than that using other methods (10-25 years). This implies that earlier replacement with efficiency models is encouraged to minimize the environmental impacts of the product. Copyright © 2012 Elsevier Ltd. All rights reserved.

Environmental impact efficiency of natural gas combined cycle power plants: A combined life cycle assessment and dynamic data envelopment analysis approach.

PubMed

Martín-Gamboa, Mario; Iribarren, Diego; Dufour, Javier

2018-02-15

The energy sector is still dominated by the use of fossil resources. In particular, natural gas represents the third most consumed resource, being a significant source of electricity in many countries. Since electricity production in natural gas combined cycle (NGCC) plants provides some benefits with respect to other non-renewable technologies, it is often seen as a transitional solution towards a future low‑carbon power generation system. However, given the environmental profile and operational variability of NGCC power plants, their eco-efficiency assessment is required. In this respect, this article uses a novel combined Life Cycle Assessment (LCA) and dynamic Data Envelopment Analysis (DEA) approach in order to estimate -over the period 2010-2015- the environmental impact efficiencies of 20 NGCC power plants located in Spain. A three-step LCA+DEA method is applied, which involves data acquisition, calculation of environmental impacts through LCA, and the novel estimation of environmental impact efficiency (overall- and term-efficiency scores) through dynamic DEA. Although only 1 out of 20 NGCC power plants is found to be environmentally efficient, all plants show a relatively good environmental performance with overall eco-efficiency scores above 60%. Regarding individual periods, 2011 was -on average- the year with the highest environmental impact efficiency (95%), accounting for 5 efficient NGCC plants. In this respect, a link between high number of operating hours and high environmental impact efficiency is observed. Finally, preliminary environmental benchmarks are presented as an additional outcome in order to further support decision-makers in the path towards eco-efficiency in NGCC power plants. Copyright © 2017 Elsevier B.V. All rights reserved.

Environmental Impacts of Renewable Electricity Generation Technologies: A Life Cycle Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heath, Garvin

2016-01-13

All energy systems impact the environment. Much has been learned about these environmental impacts from decades of research. Through systematic reviews, meta-analysis and original research, the National Renewable Energy Laboratory has been building knowledge about environmental impacts of both renewable and conventional electricity generation technologies. Evidence for greenhouse gas emissions, water and land use will be reviewed mostly from the perspective of life cycle assessment. Impacts from oil and natural gas systems will be highlighted. Areas of uncertainty and challenge will be discussed as suggestions for future research, as well as career opportunities in this field.

Road ecology in environmental impact assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, andmore » 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized but not analysed.« less

32 CFR 989.8 - Analysis of alternatives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Analysis of alternatives. 989.8 Section 989.8... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.8 Analysis of alternatives. (a) The Air Force must analyze... of reasonable alternatives, it may limit alternatives selected for detailed environmental analysis to...

32 CFR 989.37 - Procedures for analysis abroad.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Procedures for analysis abroad. 989.37 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.37 Procedures for analysis abroad. Procedures for analysis of environmental actions abroad are contained in 32 CFR part 187. That directive provides...

Managing Uncertainty: Environmental Analysis/Forecasting in Academic Planning.

ERIC Educational Resources Information Center

Morrison, James L.; Mecca, Thomas V.

An approach to environmental analysis and forecasting that educational policymakers can employ in dealing with the level of uncertainty in strategic decision making is presented. Traditional planning models are weak in identifying environmental changes and assessing their organizational impact. The proposed approach does not lead decision makers…

Assessing eco-efficiency: A metafrontier directional distance function approach using life cycle analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beltrán-Esteve, Mercedes, E-mail: mercedes.beltran@uv.es; Reig-Martínez, Ernest; Estruch-Guitart, Vicent

Sustainability analysis requires a joint assessment of environmental, social and economic aspects of production processes. Here we propose the use of Life Cycle Analysis (LCA), a metafrontier (MF) directional distance function (DDF) approach, and Data Envelopment Analysis (DEA), to assess technological and managerial differences in eco-efficiency between production systems. We use LCA to compute six environmental and health impacts associated with the production processes of nearly 200 Spanish citrus farms belonging to organic and conventional farming systems. DEA is then employed to obtain joint economic-environmental farm's scores that we refer to as eco-efficiency. DDF allows us to determine farms' globalmore » eco-efficiency scores, as well as eco-efficiency scores with respect to specific environmental impacts. Furthermore, the use of an MF helps us to disentangle technological and managerial eco-inefficiencies by comparing the eco-efficiency of both farming systems with regards to a common benchmark. Our core results suggest that the shift from conventional to organic farming technology would allow a potential reduction in environmental impacts of 80% without resulting in any decline in economic performance. In contrast, as regards farmers' managerial capacities, both systems display quite similar mean scores.« less

Environmental Impact Analysis Process. Final Environmental Impact Statement. Air Force, Space Division Housing Project, San Pedro, California

DTIC Science & Technology

1986-07-24

impact on tme local zommunity’s use of :hese facilities. g ) Released to the public 24, :986. FINAL ENVIRONMENTAL IMPACT STATEMENT kIR FORCE, SP.CE...LFM.*’* Alternative G 9 80 0 0 21 90 9 acres in southeast corner of WP and 21 acres at FM.** Alternative H 0 0 22 80 21 90 22 acres at BP and (Buildable...it may not be considered a permanent irreversible or irretrievable use of the land, the Proposed Action and alternatives (except Alternative G which

40 CFR 1508.28 - Tiering.

Code of Federal Regulations, 2014 CFR

2014-07-01

... refers to the coverage of general matters in broader environmental impact statements (such as national... regional or basinwide program statements or ultimately site-specific statements) incorporating by reference..., or policy environmental impact statement to a program, plan, or policy statement or analysis of...

40 CFR 1508.28 - Tiering.

Code of Federal Regulations, 2011 CFR

2011-07-01

... refers to the coverage of general matters in broader environmental impact statements (such as national... regional or basinwide program statements or ultimately site-specific statements) incorporating by reference..., or policy environmental impact statement to a program, plan, or policy statement or analysis of...

40 CFR 1508.28 - Tiering.

Code of Federal Regulations, 2012 CFR

2012-07-01

... refers to the coverage of general matters in broader environmental impact statements (such as national... regional or basinwide program statements or ultimately site-specific statements) incorporating by reference..., or policy environmental impact statement to a program, plan, or policy statement or analysis of...

40 CFR 1508.28 - Tiering.

Code of Federal Regulations, 2013 CFR

2013-07-01

... refers to the coverage of general matters in broader environmental impact statements (such as national... regional or basinwide program statements or ultimately site-specific statements) incorporating by reference..., or policy environmental impact statement to a program, plan, or policy statement or analysis of...

40 CFR 1508.28 - Tiering.

Code of Federal Regulations, 2010 CFR

2010-07-01

... refers to the coverage of general matters in broader environmental impact statements (such as national... regional or basinwide program statements or ultimately site-specific statements) incorporating by reference..., or policy environmental impact statement to a program, plan, or policy statement or analysis of...

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix J: Recreation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Columbia River System Operation Review

1995-11-01

This Appendix J of the Final Environmental Impact Statement for the Columbia River System discusses impacts on the recreational activities in the region. Major sections include the following: scope and processes; recreation in the Columbia River Basin today - by type, location, participation, user characteristics, factors which affect usage, and managing agencies; recreation analysis procedures and methodology; and alternatives and their impacts.

Analysis of ecological environment impact of coal exploitation and utilization

NASA Astrophysics Data System (ADS)

Zhang, Baoliu; Luo, Hong; Lv, Lianhong; Wang, Jian; Zhang, Baoshi

2018-02-01

Based on the theory of life cycle assessment, the ecological and environmental impacts of coal mining, processing, utilization and transportation will be analyzed, with analysing the status of china’s coal exploitation and utilization as the basis, it will find out the ecological and environmental impact in the development and utilization of coal, mainly consist of ecological impact including land damage, water resource destructionand biodiversity loss, etc., while the environmental impact include air, water, solid waste pollutions. Finally with a summary of the ecological and environmental problems, to propose solutionsand countermeasures to promote the rational development and consumption of coal, as well as to reduce the impact of coal production and consumption on the ecological environment, finally to achieve the coordinated development of energy and the environment.

A case study of packaging waste collection systems in Portugal - Part II: Environmental and economic analysis.

PubMed

Pires, Ana; Sargedas, João; Miguel, Mécia; Pina, Joaquim; Martinho, Graça

2017-03-01

An understanding of the environmental impacts and costs related to waste collection is needed to ensure that existing waste collection schemes are the most appropriate with regard to both environment and cost. This paper is Part II of a three-part study of a mixed packaging waste collection system (curbside plus bring collection). Here, the mixed collection system is compared to an exclusive curbside system and an exclusive bring system. The scenarios were assessed using life cycle assessment and an assessment of costs to the waste management company. The analysis focuses on the collection itself so as to be relevant to waste managers and decision-makers who are involved only in this step of the packaging life cycle. The results show that the bring system has lower environmental impacts and lower economic costs, and is capable of reducing the environmental impacts of the mixed system. However, a sensitivity analysis shows that these results could differ if the curbside collection were to be optimized. From economic and environmental perspectives, the mixed system has few advantages. Copyright © 2016 Elsevier Ltd. All rights reserved.

Lifecycle Analysis of Different Motors from the Standpoint of Environmental Impact

NASA Astrophysics Data System (ADS)

Orlova, S.; Rassõlkin, A.; Kallaste, A.; Vaimann, T.; Belahcen, A.

2016-12-01

Comparative analysis is performed for different motors from the standpoint of damage inflicted by them during their lifecycle. Three types of motors have been considered: the synchronous reluctance motor, the permanent magnet assisted synchronous reluctance motor and the induction motor. The assessment of lifecycle has been made in terms of its four stages: manufacturing, distribution, use and end of life. The results show that the production costs of synchronous reluctance motor are lower compared to that of permanent magnet assisted motors, but due to their low efficiency they exert the greatest environmental impact. The main conclusion is that the assessment made at the early designing stage for the related environmental impact enables its reduction.

Environmental impact assessment of transportation projects: An analysis using an integrated GIS, remote sensing, and spatial modeling approach

NASA Astrophysics Data System (ADS)

El-Gafy, Mohamed Anwar

Transportation projects will have impact on the environment. The general environmental pollution and damage caused by roads is closely associated with the level of economic activity. Although Environmental Impact Assessments (EIAs) are dependent on geo-spatial information in order to make an assessment, there are no rules per se how to conduct an environmental assessment. Also, the particular objective of each assessment is dictated case-by-case, based on what information and analyses are required. The conventional way of Environmental Impact Assessment (EIA) study is a time consuming process because it has large number of dependent and independent variables which have to be taken into account, which also have different consequences. With the emergence of satellite remote sensing technology and Geographic Information Systems (GIS), this research presents a new framework for the analysis phase of the Environmental Impact Assessment (EIA) for transportation projects based on the integration between remote sensing technology, geographic information systems, and spatial modeling. By integrating the merits of the map overlay method and the matrix method, the framework analyzes comprehensively the environmental vulnerability around the road and its impact on the environment. This framework is expected to: (1) improve the quality of the decision making process, (2) be applied both to urban and inter-urban projects, regardless of transport mode, and (3) present the data and make the appropriate analysis to support the decision of the decision-makers and allow them to present these data to the public hearings in a simple manner. Case studies, transportation projects in the State of Florida, were analyzed to illustrate the use of the decision support framework and demonstrate its capabilities. This cohesive and integrated system will facilitate rational decisions through cost effective coordination of environmental information and data management that can be tailored to specific projects. The framework would facilitate collecting, organizing, analyzing, archiving, and coordinating the information and data necessary to support technical and policy transportation decisions.

Assessment of environmental impacts following alternative agricultural policy scenarios.

PubMed

Bárlund, I; Lehtonen, H; Tattari, S

2005-01-01

Abstract Finnish agriculture is likely to undergo major changes in the near and intermediate future. The ifuture policy context can be examined at a general level by strategic scenario building. Computer-based modelling in combination with agricultural policy scenarios can in turn create a basis for the assessments of changes in environmental quality following possible changes in Finnish agriculture. The analysis of economic consequences is based on the DREMFIA model, which is applied to study effects of various agricultural policies on land use, animal production, and farmers' income. The model is suitable for an impact analysis covering an extended time span--here up to the year 2015. The changes in land use, obtained with the DREMFIA model assuming rational economic behaviour, form the basis when evaluating environmental impacts of different agricultural policies. The environmental impact assessment is performed using the field scale nutrient transport model ICECREAM. The modelled variables are nitrogen and phosphorus losses in surface runoff and percolation. In this paper the modelling strategy will be presented and highlighted using two case study catchments with varying environmental conditions and land use as an example. In addition, the paper identifies issues arising when connecting policy scenarios with impact modelling.

Draft Environmental Impact Statement: Peacekeeper Rail Garrison Program

DTIC Science & Technology

1988-06-01

2-13 3.0 ENVIRONMENTAL ANALYSIS METHODS ................................ 3-1 3.1 Methods for Assessing Nationwide Impacts...3-2 3.1.1 Methods for Assessing National Economic Impacts ........... 3-2 3.1.2 Methods for Assessing Railroad Network...3.2.4 Methods for Assessing Existing and Future Baseline Conditions .......................................... 3-6 3.2.5 Methods for Assessing

78 FR 56869 - Nuclear Infrastructure Programmatic Environmental Impact Statement Supplement Analysis...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-16

... DEPARTMENT OF ENERGY Nuclear Infrastructure Programmatic Environmental Impact Statement Supplement... Statement for Accomplishing Expanded Civilian Nuclear Energy Research and Development and Isotope Production...), Office of Nuclear Energy, U.S. Department of Energy, 1000 Independence Ave. SW., Washington, DC 20585...

Predicting on-site environmental impacts of municipal engineering works

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Núria, E-mail: nuria.forcada@upc.edu

2014-01-15

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering projectmore » documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also help contractors to implement environmental management systems.« less

Are environmental risk estimations linked to the actual environmental impact? Application to an oil handling facility (NE Spain).

PubMed

Valdor, Paloma F; Puente, Araceli; Gómez, Aina G; Ondiviela, Bárbara; Juanes, José A

2017-01-30

The environmental risk analysis of aquatic systems includes the evaluation of the likelihood that adverse ecological effects may occur as a result of exposure to one or more stressors. In harbor areas, pollution is provided by a complex mixture of substances with different levels of toxicity, persistence and bioaccumulation, which complicates the hazards characterization and their multiple effects. A study of the relationship between the environmental impact and the environmental risk assessment at a specific isolated oil handling facility was undertaken. The environmental risk of the oil handling facility, considering the consequences of specific pollutants, was estimated and the associated environmental impact was quantified based on a 'weights of evidence' approach. The contamination quantified at the potentially affected area around the monobuoy of Tarragona has proved to be related with environmental risk estimations but the lines of evidence obtained do not allow us to assert that the activity developed at this facility has an associated environmental impact. Copyright © 2016 Elsevier Ltd. All rights reserved.

32 CFR 989.33 - Environmental justice.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Environmental justice. 989.33 Section 989.33 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.33 Environmental justice. During the preparation of...

32 CFR 989.33 - Environmental justice.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Environmental justice. 989.33 Section 989.33 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.33 Environmental justice. During the preparation of...

Holistic environmental assessment and offshore oil field exploration and production.

PubMed

Salter, E; Ford, J

2001-01-01

According to UK Government surveys, concern for the environment is growing. Environmental regulation of the industry is becoming wider in its scope and tougher in its implementation. Various techniques are available to assess how the industry can drive down its environmental impact and comply with environmental regulation. Environmental Assessments (EA) required by European law do not cover the whole life cycle of the project that they are analysing. Life Cycle Analysis (LCA) was developed to assess the environmental loadings of a product, process or activity over its entire life cycle. It was the first technique used in environmental analysis that adopted what was described as a holistic approach. It fails this approach by not assessing accidental emissions or environmental impacts other than those that are direct. Cost Benefit Analysis (CBA) offers the opportunity to value environmental effects and appraise a project on the basis of costs and benefits. Not all environmental effects can be valued and of those that can there is considerable uncertainty in their valuation and occurrence. CBA cannot satisfactorily measure the total environmental risk of a project. Consequently there is a need for a technique that overcomes the failures of project-level EA, LCA and CBA, and assesses total environmental risk. Many organizations such as, the British Medical Association, the European Oilfield Speciality Chemicals Association, the Royal Ministry of Petroleum and Energy (Norway) and Shell Expro now recognize that a holistic approach is an integral part of assessing total risk. The Brent SPAR case study highlights the interdisciplinary nature required of any environmental analysis. Holistic Environmental Assessment is recommended as such an environmental analysis.

Garvin Heath | NREL

Science.gov Websites

& Impacts Analysis Group in the Strategic Energy Analysis Center. Areas of Expertise Life cycle environmental impacts of energy technologies, including externalities Life cycle assessment Sustainability ;Life Cycle Assessment of a Parabolic Trough Concentrating Solar Power Plant and the Impacts of Key

Environmental impact assessment of coal power plants in operation

NASA Astrophysics Data System (ADS)

Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

2017-11-01

Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

77 FR 21722 - Gore Creek Restoration Project; Intent To Prepare an Environmental Impact Statement

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... complete previously analyzed vegetation management projects, an analysis of additional temporary roads... DEPARTMENT OF AGRICULTURE Forest Service Gore Creek Restoration Project; Intent To Prepare an Environmental Impact Statement AGENCY: Medicine Bow-Routt National Forests, Forest Service, USDA. Project: Gore...

ENVIRONMENTAL IMPACTS OF HYDROCARBON EMISSIONS IN LIFE CYCLE ANALYSIS OF GASOLINE BLENDING OPTIONS

EPA Science Inventory

Changes in gasoline specifications worldwide affect demand for all major gasoline-blending components. The purpose of this study is to compare different gasoline formulations based on the accounting of the environmental impacts due to hydrocarbon emissions during the gasoline pro...

Environmental analysis of a construction and demolition waste recycling plant in Portugal--Part II: Environmental sensitivity analysis.

PubMed

Coelho, André; de Brito, Jorge

2013-01-01

Part I of this study deals with the primary energy consumption and CO(2)eq emissions of a 350 tonnes/h construction and demolition waste (CDW) recycling facility, taking into account incorporated, operation and transportation impacts. It concludes that the generated impacts are mostly concentrated in operation and transportation, and that the impacts prevented through material recycling can be up to one order of magnitude greater than those generated. However, the conditions considered for the plant's operation and related transportation system may, and very likely will, vary in the near future, which will affect its environmental performance. This performance is particularly affected by the plant's installed capacity, transportation fuel and input CDW mass. In spite of the variations in overall primary energy and CO(2)eq balances, the prevented impacts are always higher than the generated impacts, at least by a factor of three and maybe even as high as 16 times in particular conditions. The analysis indicates environmental performance for variations in single parameters, except for the plant's capacity, which was considered to vary simultaneously with all the others. Extreme best and worst scenarios were also generated to fit the results into extreme limits. Copyright © 2012 Elsevier Ltd. All rights reserved.

Environmental impact of omnivorous, ovo-lacto-vegetarian, and vegan diet.

PubMed

Rosi, Alice; Mena, Pedro; Pellegrini, Nicoletta; Turroni, Silvia; Neviani, Erasmo; Ferrocino, Ilario; Di Cagno, Raffaella; Ruini, Luca; Ciati, Roberto; Angelino, Donato; Maddock, Jane; Gobbetti, Marco; Brighenti, Furio; Del Rio, Daniele; Scazzina, Francesca

2017-07-21

Food and beverage consumption has a great impact on the environment, although there is a lack of information concerning the whole diet. The environmental impact of 153 Italian adults (51 omnivores, 51 ovo-lacto-vegetarians, 51 vegans) and the inter-individual variability within dietary groups were assessed in a real-life context. Food intake was monitored with a 7-d dietary record to calculate nutritional values and environmental impacts (carbon, water, and ecological footprints). The Italian Mediterranean Index was used to evaluate the nutritional quality of each diet. The omnivorous choice generated worse carbon, water and ecological footprints than other diets. No differences were found for the environmental impacts of ovo-lacto-vegetarians and vegans, which also had diets more adherent to the Mediterranean pattern. A high inter-individual variability was observed through principal component analysis, showing that some vegetarians and vegans have higher environmental impacts than those of some omnivores. Thus, regardless of the environmental benefits of plant-based diets, there is a need for thinking in terms of individual dietary habits. To our knowledge, this is the first time environmental impacts of three dietary regimens are evaluated using individual recorded dietary intakes rather than hypothetical diet or diets averaged over a population.

32 CFR 989.14 - Environmental assessment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Environmental assessment. 989.14 Section 989.14 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.14 Environmental assessment. (a) When a proposed action is...

32 CFR 989.14 - Environmental assessment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Environmental assessment. 989.14 Section 989.14 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.14 Environmental assessment. (a) When a proposed action is...

32 CFR 989.14 - Environmental assessment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Environmental assessment. 989.14 Section 989.14 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.14 Environmental assessment. (a) When a proposed action is...

32 CFR 989.14 - Environmental assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Environmental assessment. 989.14 Section 989.14 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.14 Environmental assessment. (a) When a proposed action is...

Final (Tier 1) environmental impact statement for the Galileo and Ulysses Missions

NASA Technical Reports Server (NTRS)

1988-01-01

Presented here is a Final (Tier 1) Environmental Impact Statement (EIS) addressing the potential environmental consequences associated with continuing the modifications of the Galileo and Ulysses spacecraft for launch using a booster/upper stage combination that is different from the one planned for use prior to the Challenger accident, while conducting the detailed safety and environmental analysis in order to preserve the October 1989 launch opportunity for Galileo and an October 1990 launch opportunity for Ulysses. While detailed safety and environmental analyses associated with the missions are underway, they currently are not complete. Nevertheless, sufficient information is available to enable a choice among the reconfiguration alternatives presented. Relevant assessments of the potential for environmental impacts are presented.

Sonic Boom Assessment for the Crew Exploration Vehicle

NASA Technical Reports Server (NTRS)

Herron, Marissa

2007-01-01

The Constellation Environmental Impact Statement (Cx EIS) requires that an assessment be performed on the environmental impact of sonic booms during the reentry of the Crew Exploration Vehicle (CEV). This included an analysis of current planned vehicle trajectories for the Crew Module (CM) and the Service Module (SM) debris and the determination of the potential impact to the overflown environment.

Final Environmental Assessment for the Grace Hopper Bridge Embankment Repairs at Joint Base Charleston Weapons Station, South Carolina

DTIC Science & Technology

2015-07-06

geotechnical reconunendations to aid in design of a retaining wall structure in case this alternative is considered in the future. Based on a telephone...potentially involve significant impacts on the environment must be reviewed in accordance with the National Environmental Policy Act (NEPA) and all other...Code of Federal Regulations (CFR) 989, Environmental Impact Analysis Process (EIAP). The analyses focus on the following environmental resources: noise

Expanding Health Technology Assessments to Include Effects on the Environment.

PubMed

Marsh, Kevin; Ganz, Michael L; Hsu, John; Strandberg-Larsen, Martin; Gonzalez, Raquel Palomino; Lund, Niels

2016-01-01

There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case for incorporating environmental impacts into the health technology assessment (HTA) process and discusses the associated challenges. Two arguments favor incorporating environmental impacts into HTA: 1) environmental changes could directly affect people's health and 2) policy decision makers have broad mandates and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some of the value of environmental impacts, especially those generating health impacts, but might not be suitable for addressing broader concerns. Both cost-benefit and multicriteria decision analyses are potential methods for evaluating health and environmental outcomes, but are less familiar to health care decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing and incorporating environmental data as part of HTA. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Comparative assessment of the environmental sustainability of existing and emerging perchlorate treatment technologies for drinking water.

PubMed

Choe, Jong Kwon; Mehnert, Michelle H; Guest, Jeremy S; Strathmann, Timothy J; Werth, Charles J

2013-05-07

Environmental impacts of conventional and emerging perchlorate drinking water treatment technologies were assessed using life cycle assessment (LCA). Comparison of two ion exchange (IX) technologies (i.e., nonselective IX with periodic regeneration using brines and perchlorate-selective IX without regeneration) at an existing plant shows that brine is the dominant contributor for nonselective IX, which shows higher impact than perchlorate-selective IX. Resource consumption during the operational phase comprises >80% of the total impacts. Having identified consumables as the driving force behind environmental impacts, the relative environmental sustainability of IX, biological treatment, and catalytic reduction technologies are compared more generally using consumable inputs. The analysis indicates that the environmental impacts of heterotrophic biological treatment are 2-5 times more sensitive to influent conditions (i.e., nitrate/oxygen concentration) and are 3-14 times higher compared to IX. However, autotrophic biological treatment is most environmentally beneficial among all. Catalytic treatment using carbon-supported Re-Pd has a higher (ca. 4600 times) impact than others, but is within 0.9-30 times the impact of IX with a newly developed ligand-complexed Re-Pd catalyst formulation. This suggests catalytic reduction can be competitive with increased activity. Our assessment shows that while IX is an environmentally competitive, emerging technologies also show great promise from an environmental sustainability perspective.

Integration, status and potential of environmental justice and the social impact assessment process in transportation development in Missouri

DOT National Transportation Integrated Search

2003-12-01

This research examines the Social Impact Assessment Process at the Missouri Department of Transportation as directed by the : National Environmental Policy Act (NEPA). The analysis includes an examination of the influences of the more recent directiv...

75 FR 43865 - Licenses, Certifications, and Approvals for Material Licensees

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

.... Environmental Impact--Categorical Exclusion X. Paperwork Reduction Act Statement XI. Regulatory Analysis XII... the briefing, the Commission received a letter from the Nuclear Energy Institute (NEI) dated March 3... that such activities were conducted so as to minimize their environmental impact, and to conform the...

32 CFR 651.42 - Actions normally requiring an EIS.

Code of Federal Regulations, 2011 CFR

2011-07-01

... environmental damage might occur. (g) Major changes in the mission or facilities either affecting...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.42... effect on wetlands, coastal zones, or other areas of critical environmental concern. (c) The disposal of...

Environmental impact analysis with the airspace concept evaluation system

NASA Technical Reports Server (NTRS)

Augustine, Stephen; Capozzi, Brian; DiFelici, John; Graham, Michael; Thompson, Terry; Miraflor, Raymond M. C.

2005-01-01

The National Aeronautics and Space Administration (NASA) Ames Research Center has developed the Airspace Concept Evaluation System (ACES), which is a fast-time simulation tool for evaluating Air Traffic Management (ATM) systems. This paper describes linking a capability to ACES which can analyze the environmental impact of proposed future ATM systems. This provides the ability to quickly evaluate metrics associated with environmental impacts of aviation for inclusion in multi-dimensional cost-benefit analysis of concepts for evolution of the National Airspace System (NAS) over the next several decades. The methodology used here may be summarized as follows: 1) Standard Federal Aviation Administration (FAA) noise and emissions-inventory models, the Noise Impact Routing System (NIRS) and the Emissions and Dispersion Modeling System (EDMS), respectively, are linked to ACES simulation outputs; 2) appropriate modifications are made to ACES outputs to incorporate all information needed by the environmental models (e.g., specific airframe and engine data); 3) noise and emissions calculations are performed for all traffic and airports in the study area for each of several scenarios, as simulated by ACES; and 4) impacts of future scenarios are compared to the current NAS baseline scenario. This paper also provides the results of initial end-to-end, proof-of-concept runs of the integrated ACES and environmental-modeling capability. These preliminary results demonstrate that if no growth is likely to be impeded by significant environmental impacts that could negatively affect communities throughout the nation.

Environmental Assessment and Finding of No Significant Impact: Kalina Geothermal Demonstration Project Steamboat Springs, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

1999-02-22

The Department of Energy (DOE) has prepared an Environmental Assessment (EA) to provide the DOE and other public agency decision makers with the environmental documentation required to take informed discretionary action on the proposed Kalina Geothermal Demonstration project. The EA assesses the potential environmental impacts and cumulative impacts, possible ways to minimize effects associated with partial funding of the proposed project, and discusses alternatives to DOE actions. The DOE will use this EA as a basis for their decision to provide financial assistance to Exergy, Inc. (Exergy), the project applicant. Based on the analysis in the EA, DOE has determinedmore » that the proposed action is not a major Federal action significantly affecting the quality of the human or physical environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an environmental impact statement is not required and DOE is issuing this Finding of No Significant Impact (FONSI).« less

On-Site Renewable Energy and Green Buildings: A System-Level Analysis.

PubMed

Al-Ghamdi, Sami G; Bilec, Melissa M

2016-05-03

Adopting a green building rating system (GBRSs) that strongly considers use of renewable energy can have important environmental consequences, particularly in developing countries. In this paper, we studied on-site renewable energy and GBRSs at the system level to explore potential benefits and challenges. While we have focused on GBRSs, the findings can offer additional insight for renewable incentives across sectors. An energy model was built for 25 sites to compute the potential solar and wind power production on-site and available within the building footprint and regional climate. A life-cycle approach and cost analysis were then completed to analyze the environmental and economic impacts. Environmental impacts of renewable energy varied dramatically between sites, in some cases, the environmental benefits were limited despite the significant economic burden of those renewable systems on-site and vice versa. Our recommendation for GBRSs, and broader policies and regulations, is to require buildings with higher environmental impacts to achieve higher levels of energy performance and on-site renewable energy utilization, instead of fixed percentages.

Adobe, rammed earth and wood: An energy-based environmental analysis of residential construction in Phoenix, Arizona

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gossen, C.L.

1996-10-01

More than 90% of the new single-family dwellings built in the Phoenix Metropolitan Area consists of wood frame construction. Using adobe and rammed earth as alternatives in residential wall construction are the main focus of this study. The study examines the process of home construction, concentrating on the environmental impacts of energy embodied in the four stages: extraction, transportation, construction, and operation. These four stages were applied to three prototypes built in the Phoenix Area throughout one year. The results are compared to determine which has the lowest environmental costs and most likely to benefit sustainability. The study requires amore » comparative analysis rather than a definite choice of a better prototype. The information provides assistance to the builder/designer with options about environmental impacts and the whole energy spectrum. Wherein previous research was based on performance standards of operation, one must also consider environmental impacts and externalities.« less

Environmental impact analysis of batik natural dyes using life cycle assessment

NASA Astrophysics Data System (ADS)

Rinawati, Dyah Ika; Sari, Diana Puspita; Purwanggono, Bambang; Hermawan, Andy Tri

2017-11-01

The use of natural dyes for batik dyeing is fewer than synthetic dyes because of its limitations in the application such complexity in manufacture and usage. For ease of use, natural dyes need to be processed into instant products. Extract of natural dyes are generally produced in liquid form that are less practical in long-term use. Dye powder obtained by drying the liquid extract using spray dryer. Production process of liquid natural dye is simpler and require less energy but need more energy for transporting. It is important to know which type of natural dyes should be produced based on their environmental impact. This research aim to compare environmental impact between liquid and powder natural dyes and also to find relative contribution of different stage in life cycle to total environmental impact. The appropriate method to analyze and compare the environmental impacts of powder and liquid natural dyes is Life Cycle Assessment (LCA). The "cradle to grave" approach used to assess environmental impact of powder and liquid natural dyes of Jalawe rind throughout production process of natural dyes, distribution and use of natural dyes for coloring batik. Results of this research show that powder natural dyes has lower environmental impacts than liquid natural dyes. It was found that distribution, mordanting and packaging of liquid dyes have big contribution to environmental impact.

Anticipating environmental and environmental-health implications of extreme storms: ARkStorm scenario

USGS Publications Warehouse

Plumlee, Geoffrey S.; Alpers, Charles N.; Morman, Suzette A.; San Juan, Carma A.

2016-01-01

The ARkStorm Scenario predicts that a prolonged winter storm event across California would cause extreme precipitation, flooding, winds, physical damages, and economic impacts. This study uses a literature review and geographic information system-based analysis of national and state databases to infer how and where ARkStorm could cause environmental damages, release contamination from diverse natural and anthropogenic sources, affect ecosystem and human health, and cause economic impacts from environmental-remediation, liability, and health-care costs. Examples of plausible ARkStorm environmental and health concerns include complex mixtures of contaminants such as petroleum, mercury, asbestos, persistent organic pollutants, molds, and pathogens; adverse physical and contamination impacts on riverine and coastal marine ecosystems; and increased incidences of mold-related health concerns, some vector-borne diseases, and valley fever. Coastal cities, the San Francisco Bay area, the Sacramento-San Joaquin River Delta, parts of the Central Valley, and some mountainous areas would likely be most affected. This type of screening analysis, coupled with follow-up local assessments, can help stakeholders in California and disaster-prone areas elsewhere better plan for, mitigate, and respond to future environmental disasters.

Draft Environmental Impact Statement for the Ulysses Mission (Tier 2)

NASA Technical Reports Server (NTRS)

1990-01-01

This Draft Environmental Impact Statement (DEIS) addresses the environmental impacts which may be caused by the preparation and operation of the Ulysses spacecraft, including its planned launch on the Space Transportation System (STS) Shuttle and the alternative of canceling further work on the mission. The launch configuration will use the STS/Inertial Upper Stage (IUS)/Payload Assist Module-Special(PAM-S) combination. The Tier 1 EIS included a delay alternative which considered the Titan 4 launch vehicle as an alternative booster stage for launch in 1991 or later. However, the U.S. Air Force, which procures the Titan 4 for NASA, could not provide a Titan 4 vehicle for the 1991 launch opportunity because of high priority Department of Defense requirements. The only expected environmental effects of the proposed action are associated with normal Shuttle launch operations. These impacts are limited largely to the near-field at the launch pad, except for temporary stratospheric ozone effects during launch and occasional sonic boom effects near the landing site. These effects have been judged insufficient to preclude Shuttle launches. In the event of (1) an accident during launch, or (2) reentry of the spacecraft from earth orbit, there are potential adverse health and environmental effects associated with the possible release of plutonium dioxide from the spacecraft's radioisotope thermoelectric generators (RTG). The potential effects considered in this EIS include risks of air and water quality impacts, local land area contamination, adverse health and safety impacts, the disturbance of biotic resources, impacts on wetland areas or areas containing historical sites, and socioeconomic impacts. Intensive analysis of the possible accidents associated with the proposed action are underway and preliminary results indicate small health or environmental risks. The results of a Final Safety Analysis Report will be available for inclusion into the final EIS.

Environmental Assessment of Different Cement Manufacturing Processes Based on Emergy and Ecological Footprint Analysis

EPA Science Inventory

Due to its high environmental impact and energy intensive production, the cement industry needs to adopt more energy efficient technologies to reduce its demand for fossil fuels and impact on the environment. Bearing in mind that cement is the most widely used material for housin...

32 CFR 989.21 - Record of decision (ROD).

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.21 Record of decision (ROD). (a) The proponent and the EPF... all the major factors the agency weighed in making its decision, including essential considerations of... avoid, minimize, or mitigate environmental impacts and, if not, explain why not. [64 FR 38129, July 15...

32 CFR 989.21 - Record of decision (ROD).

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.21 Record of decision (ROD). (a) The proponent and the EPF... all the major factors the agency weighed in making its decision, including essential considerations of... avoid, minimize, or mitigate environmental impacts and, if not, explain why not. [64 FR 38129, July 15...

32 CFR 989.21 - Record of decision (ROD).

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.21 Record of decision (ROD). (a) The proponent and the EPF... all the major factors the agency weighed in making its decision, including essential considerations of... avoid, minimize, or mitigate environmental impacts and, if not, explain why not. [64 FR 38129, July 15...

75 FR 51423 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-20

... of energy consumption for assessment of national and environmental impact, especially levels of..., fuel oil, coal, biomass, and nuclear energy used for electricity generation. The conversion factors... to change during a 25-year span covered by an environmental impact analysis completed in 2010. Table...

7 CFR 1779.9 - Environmental requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 12 2011-01-01 2011-01-01 false Environmental requirements. 1779.9 Section 1779.9... AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.9 Environmental requirements. Facilities financed must undergo an environmental impact analysis in accordance with the National...

An Introductory Lesson to Environmental Health: Media Analysis and Risk Reduction

ERIC Educational Resources Information Center

Ratnapradipa, Dhitinut; Rhodes, Darson L.

2010-01-01

This activity is designed to provide students with an overview of environmental health and to encourage them to think critically about how they can minimize their potential negative health impacts from environmental exposures. Objectives: Students will (a) define environmental health, (b) analyze media wherein environmental health issues are…

Evaluating the environmental impact of various dietary patterns combined with different food production systems.

PubMed

Baroni, L; Cenci, L; Tettamanti, M; Berati, M

2007-02-01

Recent studies support the hypothesis that plant-based diets are environmentally better than meat-based diets. This study aims to further explore this topic and to compare different environmental impacts resulting from different dietary patterns (omnivorous, vegetarian, vegan) and methods of production (conventional farming and organic agriculture). Three weekly balanced diets, equivalent to one another for energetic and nutrient content, have been planned: an omnivorous one, a vegetarian one and a vegan one. For each one, the Life Cycle Assessment (LCA) method has been applied in order to calculate the environmental impact, expressed in 'points'. The software we selected to carry out the Inventory Analysis and the Impact Assessment is SimaPro5. The Assessment phase has been conducted using Ecoindicator 99, a damage-oriented method, which analyses the impact according to three large damage categories, each of them subsuming various impact categories.

Life cycle assessment of biomethane use in Argentina.

PubMed

Morero, Betzabet; Groppelli, Eduardo; Campanella, Enrique A

2015-04-01

Renewable substitutes for natural gas, such as biogas, require adequate treatment to remove impurities. This paper presents the life cycle and environmental impact of upgrading biogas using absorption-desorption process with three different solvents: water, diglycolamine and polyethylene glycol dimethyl ether. The results showed that water produces a minor impact in most of the considered categories, and an economic analysis showed that water is the most feasible solvent for obtaining the lowest payback period. This analysis includes three different sources for biogas production and two end uses for biomethane. The use of different wastes as sources results in different environmental impacts depending on the type of energy used in the anaerobic digestion. The same situation occurs when considering the use of biomethane as a domestic fuel or for power generation. Using energy from biogas to replace conventional energy sources in production and upgrading biogas significantly reduce the environmental impacts of processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Integrative Application of Life Cycle Assessment and Risk Assessment to Environmental Impacts of Anthropogenic Pollutants at a Watershed Scale.

PubMed

Lin, Xiaodan; Yu, Shen; Ma, Hwongwen

2018-01-01

Intense human activities have led to increasing deterioration of the watershed environment via pollutant discharge, which threatens human health and ecosystem function. To meet a need of comprehensive environmental impact/risk assessment for sustainable watershed development, a biogeochemical process-based life cycle assessment and risk assessment (RA) integration for pollutants aided by geographic information system is proposed in this study. The integration is to frame a conceptual protocol of "watershed life cycle assessment (WLCA) for pollutants". The proposed WLCA protocol consists of (1) geographic and environmental characterization mapping; (2) life cycle inventory analysis; (3) integration of life-cycle impact assessment (LCIA) with RA via characterization factor of pollutant of interest; and (4) result analysis and interpretation. The WLCA protocol can visualize results of LCIA and RA spatially for the pollutants of interest, which might be useful for decision or policy makers for mitigating impacts of watershed development.

Initial Northwest Power Act Power Sales Contracts : Final Environmental Impact Statement. Volume 2, Appendices A--L.

DOE Office of Scientific and Technical Information (OSTI.GOV)

United States. Bonneville Power Administration.

1992-01-01

This report consists of appendices A-L of the final environmental impact statement for the Bonneville Power Administration. The appendices provide information on the following: Ninth circuit Court opinion in Forelaws on Board v. Johnson; guide to Northwest Power act contracts; guide to hydro operations; glossary; affected environment supporting documentation; environmental impacts of generic resource types; information on models used; technical information on analysis; public involvement activities; bibliography; Pacific Northwest Electric Power Planning and Conservation Act; and biological assessment. (CBS)

Environmental analysis of Ribeiro wine from a timeline perspective: harvest year matters when reporting environmental impacts.

PubMed

Vázquez-Rowe, Ian; Villanueva-Rey, Pedro; Moreira, Ma Teresa; Feijoo, Gumersindo

2012-05-15

A series of Galician (NW Spain) wines, such as Rías Baixas and Ribeiro have acquired international renown in the past few years. In this particular study, viticulture, vinification and bottling and packaging in a winery of the Ribeiro appellation were studied from a life cycle assessment perspective, with the main objective of identifying the largest environmental impacts for four different years of production (2007-2010). The selected functional unit was a 750 mL bottle of Ribeiro white wine, packaged for distribution. Inventory data was gathered mainly through direct communication using questionnaires. Results showed considerable annual variability in environmental performance, stressing the importance of including timeline analysis in the wine sector. Therefore, environmental scaling was proposed for the assessed wine based on the individual environmental impacts for each harvest year. Furthermore, the main hot spots identified were compost and pesticide production and emissions, in the agricultural phase and bottle production and electricity consumption, in the subsequent stages of wine production, in most of the selected impact categories. Suggested improvement opportunities included shifts in the compost transportation policy, recovery of natural resources for vineyard infrastructure, the introduction of new packaging formats in the bottling process and the use of pesticides with lower toxicity potential. Copyright © 2012 Elsevier Ltd. All rights reserved.

32 CFR 651.9 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... decision-making reflect Army environmental values, such as compliance with environmental policy, laws, and... early as possible to avoid potential delays. (b) All Army decision-making that may impact the human... ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) National Environmental Policy Act and the Decision Process...

Strategies for Evaluating Complex Environmental Education Programs

NASA Astrophysics Data System (ADS)

Williams, V.

2011-12-01

Evidence for the effectiveness of environmental education programs has been difficult to establish for many reasons. Chief among them are the lack of clear program objectives and an inability to conceptualize how environmental education programs work. Both can lead to evaluations that make claims that are difficult to substantiate, such as significant changes in student achievement levels or behavioral changes based on acquisition of knowledge. Many of these challenges can be addressed by establishing the program theory and developing a logic model. However, claims of impact on larger societal outcomes are difficult to attribute solely to program activities. Contribution analysis may offer a promising method for addressing this challenge. Rather than attempt to definitively and causally link a program's activities to desired results, contribution analysis seeks to provide plausible evidence that can reduce uncertainty regarding the 'difference' a program is making to observed outcomes. It sets out to verify the theory of change behind a program and, at the same time, takes into consideration other influencing factors. Contribution analysis is useful in situations where the program is not experimental-there is little or no scope for varying how the program is implemented-and the program has been funded on the basis of a theory of change. In this paper, the author reviews the feasibility of using contribution analysis as a way of evaluating the impact of the GLOBE program, an environmental science and education program. Initially conceptualized by Al Gore in 1995, the program's implementation model is based on worldwide environmental monitoring by students and scientists around the globe. This paper will make a significant and timely contribution to the field of evaluation, and specifically environmental education evaluation by examining the usefulness of this analysis for developing evidence to assess the impact of environmental education programs.

Draft Environmental Impact Report/Environmental Impact Statement. Cullinan Ranch Specific Plan. Appendices.

DTIC Science & Technology

1983-05-01

520,000 TOTAL 1981 344,038 $86,094,700 FIELD CROPS 1980 323,661 $86,755,900 -2- I SONOMA COUNTY AGRICULTURAL COMMISSI 2555 Mendocino Avenue Santa Rosa...M College. Activities in North Bax Area 1950 Koretsky King/Lee, Strangio & Associates. " Sonoma County Wastewater Reclamation Project." Prepared the...economic analysis. 1976 Coleman Williams, Inc. "Route 37 Corridor." Helped with the economic analysis of agriculture in Southern Sonoma County . J2

Advanced exergoenvironmental analysis of a near-zero emission power plant with chemical looping combustion.

PubMed

Petrakopoulou, Fontina; Tsatsaronis, George; Morosuk, Tatiana

2012-03-06

Carbon capture and storage (CCS) from power plants can be used to mitigate CO(2) emissions from the combustion of fossil fuels. However, CCS technologies are energy intensive, decreasing the operating efficiency of a plant and increasing its costs. Recently developed advanced exergy-based analyses can uncover the potential for improvement of complex energy conversion systems, as well as qualify and quantify plant component interactions. In this paper, an advanced exergoenvironmental analysis is used for the first time as means to evaluate an oxy-fuel power plant with CO(2) capture. The environmental impacts of each component are split into avoidable/unavoidable and endogenous/exogenous parts. In an effort to minimize the environmental impact of the plant operation, we focus on the avoidable part of the impact (which is also split into endogenous and exogenous parts) and we seek ways to decrease it. The results of the advanced exergoenvironmental analysis show that the majority of the environmental impact related to the exergy destruction of individual components is unavoidable and endogenous. Thus, the improvement potential is rather limited, and the interactions of the components are of lower importance. The environmental impact of construction of the components is found to be significantly lower than that associated with their operation; therefore, our suggestions for improvement focus on measures concerning the reduction of exergy destruction and pollutant formation.

Environmental and economic analysis of an in-vessel food waste composting system at Kean University in the U.S.

PubMed

Mu, Dongyan; Horowitz, Naomi; Casey, Maeve; Jones, Kimmera

2017-01-01

A composting system provides many benefits towards achieving sustainability such as, replacing fertilizer use, increasing the quantity of produce sold, and diverting organic wastes from landfills. This study delves into the many benefits a composting system provided by utilizing an established composting system at Kean University (KU) in New Jersey, as a scale project to examine the composters' environmental and economic impacts. The results from the study showed that composting food wastes in an in-vessel composter when compared to typical disposal means by landfilling, had lower impacts in the categories of fossil fuel, GHG emissions, eutrophication, smog formation and respiratory effects; whereas, its had higher impacts in ozone depletion, acidification human health impacts, and ecotoxicity. The environmental impacts were mainly raised from the manufacturing of the composter and the electricity use for operation. Applying compost to the garden can replace fertilizers and also lock carbon and nutrients in soil, which reduced all of the environmental impact categories examined. In particular, the plant growth and use stage reduced up to 80% of respiratory effects in the life cycle of food waste composting. A cost-benefit analysis showed that the composting system could generate a profit of $13,200 a year by selling vegetables grown with compost to the student cafeteria at Kean and to local communities. When educational and environmental benefits were included in the analysis, the revenue increased to $23,550. The results suggest that in-vessel composting and the subsequent usage of a vegetable garden should be utilized by Universities or food markets that generate intensive food wastes across the U.S. Published by Elsevier Ltd.

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributesmore » including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)« less

How can farming intensification affect the environmental impact of milk production?

PubMed

Bava, L; Sandrucci, A; Zucali, M; Guerci, M; Tamburini, A

2014-07-01

The intensification process of the livestock sector has been characterized in recent decades by increasing output of product per hectare, increasing stocking rate, including more concentrated feed in the diet, and improving the genetic merit of the breeds. In dairy farming, the effects of intensification on the environmental impact of milk production are not completely clarified. The aim of the current study was to assess the environmental impacts of dairy production by a life cycle approach and to identify relations between farming intensity and environmental performances expressed on milk and land units. A group of 28 dairy farms located in northern Italy was involved in the study; data collected during personal interviews of farmers were analyzed to estimate emissions (global warming potential, acidification, and eutrophication potentials) and nonrenewable source consumption (energy and land use). The environmental impacts of milk production obtained from the life cycle assessment were similar to those of other recent studies and showed high variability among the farms. From a cluster analysis, 3 groups of farms were identified, characterized by different levels of production intensity. Clusters of farms showed similar environmental performances on product basis, despite important differences in terms of intensification level, management, and structural characteristics. Our study pointed out that, from a product perspective, the most environmentally friendly way to produce milk is not clearly identifiable. However, the principal component analysis showed that some characteristics related to farming intensification, such as milk production per cow, dairy efficiency, and stocking density, were negatively related to the impacts per kilogram of product, suggesting a role of these factors in the mitigation strategy of environmental burden of milk production on a global scale. Considering the environmental burden on a local perspective, the impacts per hectare were positively associated with the intensification level. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

78 FR 43868 - Notice of Intent To Prepare a Draft Environmental Impact Statement for the Whittier Narrows Dam...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-22

... completed in 1957 as an integral component of the Los Angeles County Drainage Area system of dams and... several measures including: emergency management preparedness, remote monitoring, increased inspections... Scope of Analysis. The EIS will also evaluate the impacts of alternatives on environmental resources...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2012 CFR

2012-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2014 CFR

2014-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2013 CFR

2013-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

Using reclaimed lumber and wood flooring in construction : measuring environmental impact using life-cycle inventory analysis

Treesearch

Richard D. Bergman; Hongmei Gu; Robert H. Falk; Thomas R. Napier

2010-01-01

With green building concepts becoming widespread in the construction field, building practices and materials are being examined for their environmental impact. Reusing building materials has a distinct advantage over using newly manufactured materials because these reclaimed materials avoid greenhouse gas emissions associated with new (virgin) material manufacturing....

Central Radar System, Over-the-Horizon Backscatter

DTIC Science & Technology

1990-03-09

1,2-Dibromo-3- chloropropane (DBCP) 0.3 TABLE 41-6 (Continued). MINNESOTA RECOMMENDED ALLOWABLE LIMITS (RAL) FOR DRINKING WATER WELLS Compound RAL (ug/ 1 ...TABLE OF CONTENTS ENVIRONMENTAL IMPACT ANALYSIS PROCESS OVERVIEW ............ TECHNICAL STUDY 1 FACILITIES...TECHNICAL STUDY 10 0 TECHNICAL STUDY 1 CENTRAL RADAR SYSTEM OVER-THE-HORIZON BACKSCATTER RADAR PROGRAM 0 ENVIRONMENTAL IMPACT

Environmental Impact Analysis Process. Final Environmental Impact Statement. Part 2A. Proposed Central Radar System Over-the-Horizon Backscatter Radar Program

DTIC Science & Technology

1987-05-01

processes or thermoregulation . Most investigations involving chronic exposures of mammals indicated either that no effects occurred or that reversible...radiofrequency radiation danger "* Fish, reptiles , and amphibians - Few species and fisheries - Avoid streams and wetlands, when possible 3-37 BIRDS "* The

15 CFR 971.204 - Environmental and use conflict analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... If the permit area lies within the area of NOAA's Deep Ocean Mining Environmental Study (DOMES), the... REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS... Administrator to prepare an environmental impact statement (EIS) on the proposed mining activities, and to...

15 CFR 971.204 - Environmental and use conflict analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... If the permit area lies within the area of NOAA's Deep Ocean Mining Environmental Study (DOMES), the... REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS... Administrator to prepare an environmental impact statement (EIS) on the proposed mining activities, and to...

15 CFR 971.204 - Environmental and use conflict analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... If the permit area lies within the area of NOAA's Deep Ocean Mining Environmental Study (DOMES), the... REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS... Administrator to prepare an environmental impact statement (EIS) on the proposed mining activities, and to...

15 CFR 971.204 - Environmental and use conflict analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... If the permit area lies within the area of NOAA's Deep Ocean Mining Environmental Study (DOMES), the... REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS... Administrator to prepare an environmental impact statement (EIS) on the proposed mining activities, and to...

76 FR 2901 - Cellu Tissue Corporation; Notice of Availability of Environmental Assessment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

... Tissue Corporation; Notice of Availability of Environmental Assessment January 11, 2011. In accordance with the National Environmental Policy Act of 1969 and the Federal Energy Regulatory Commission... Assessment (EA) for the project. The EA contains the staff's analysis of the potential environmental impacts...

Environmental Impact Analysis Process. Draft Environmental Impact Statement, Winnersville Weapons Range, Lanier and Lowndes Counties, Georgia

DTIC Science & Technology

1985-07-01

proposed range . 54 Table 4.4. HUD site acceptability standards ... ........... .. 55 Table 4.5. Predicted pollutant emissions for flight activties...Current flight operations from Moody contribute particulatmatter, carbon monoxide, hydrocarbons, oxides of nitrogen, and oxides of sulfur to the...regional pollution levels, but because of the amounts emitted and the altitudes at which they typically occur, these emissions have only minor impact on

Assessing contributory risk using economic input-output life-cycle analysis.

PubMed

Miller, Ian; Shelly, Michael; Jonmaire, Paul; Lee, Richard V; Harbison, Raymond D

2005-04-01

The contribution of consumer purchases of non-essential products to environmental pollution is characterized. Purchase decisions by consumers induce a complex sequence of economy-wide production interactions that influence the production and consumption of chemicals and subsequent exposure and possible public health risks. An economic input-output life-cycle analysis (EIO-LCA) was used to link resource consumption and production by manufacturers to corresponding environmental impacts. Using the US Department of Commerce's input-output tables together with the US Environmental Protection Agency's Toxics Release Inventory and AIRData databases, the economy-wide air discharges resulting from purchases of household appliances, motor homes, and games and toys were quantified. The economic and environmental impacts generated from a hypothetical 10,000 US dollar purchase for selected consumer items were estimated. The analysis shows how purchases of seemingly benign consumer products increase the output of air pollutants along the supply chain and contribute to the potential risks associated with environmental chemical exposures to both consumers and non-consumers alike.

76 FR 26996 - Notice of Intent To Prepare an Environmental Impact Statement for New Corporate Average Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

...Pursuant to the National Environmental Policy Act (NEPA), NHTSA plans to prepare an Environmental Impact Statement (EIS) to analyze the potential environmental impacts of the agency's Corporate Average Fuel Economy program for passenger automobiles (referred to herein as ``passenger cars'') and non-passenger automobiles (referred to herein as ``light trucks''). The EIS will consider the potential environmental impacts of new fuel economy standards for model years 2017-2025 passenger cars and light trucks that NHTSA will be proposing pursuant to the Energy Independence and Security Act of 2007. This notice initiates the NEPA scoping process by inviting comments from Federal, State, and local agencies, Indian tribes, and the public to help identify the environmental issues and reasonable alternatives to be examined in the EIS. This notice also provides guidance for participating in the scoping process and additional information about the alternatives NHTSA expects to consider in its NEPA analysis. In preparing this notice, NHTSA has shared the document with the Council on Environmental Quality (CEQ), the Environmental Protection Agency (EPA), and the Department of Energy (DOE).

Impact resistance of fiber composites - Energy-absorbing mechanisms and environmental effects

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Sinclair, J. H.

1985-01-01

Energy absorbing mechanisms were identified by several approaches. The energy absorbing mechanisms considered are those in unidirectional composite beams subjected to impact. The approaches used include: mechanic models, statistical models, transient finite element analysis, and simple beam theory. Predicted results are correlated with experimental data from Charpy impact tests. The environmental effects on impact resistance are evaluated. Working definitions for energy absorbing and energy releasing mechanisms are proposed and a dynamic fracture progression is outlined. Possible generalizations to angle-plied laminates are described.

Impact resistance of fiber composites: Energy absorbing mechanisms and environmental effects

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Sinclair, J. H.

1983-01-01

Energy absorbing mechanisms were identified by several approaches. The energy absorbing mechanisms considered are those in unidirectional composite beams subjected to impact. The approaches used include: mechanic models, statistical models, transient finite element analysis, and simple beam theory. Predicted results are correlated with experimental data from Charpy impact tests. The environmental effects on impact resistance are evaluated. Working definitions for energy absorbing and energy releasing mechanisms are proposed and a dynamic fracture progression is outlined. Possible generalizations to angle-plied laminates are described.

Web Application for Coastal Area Planning through Analysis of Landslide and Soil Consumption

NASA Astrophysics Data System (ADS)

Panizzoni, Giulio; Debiasi, Alberto; Eccher, Matteo; De Amicis, Raffaele

2016-04-01

Global warming and rapid climatic changes are producing dramatic effects on coastal area of Mediterranean countries. Italian coastal areas are one of the most urbanized zones of the south western Europe and the extensive use of soil is causing a consistent impact on the hydrogeological context. Moreover, soil consumption combined with extreme meteorological events, facilitates the occurrence of hazardous landslide events. Environmental policy makers and data managers in territorial planning need to face such emergency situation with appropriate tools. We present an application service with the aim of advising user through environmental analysis of Landslide and Soil Consumption impact. This service wants also to improve the sharing of environmental harmonized datasets/metadata across different organizations and the creation of a collaborative environment where the stakeholders and environmental experts can share their data and work cooperatively. We developed a set of processing services providing functionalities to assess impact of landslide on territory and impact of land take and soil sealing. Among others, the service is able to evaluate environmental impacts of landslide events on Cultural Heritage sites. We have also designed a 3D WebGL client customized to execute the processing services and visualize their outputs. It provides high usability in terms of navigation and data visualization. In this way the service provides not only a Spatial Data Infrastructure to access and visualize data but a complete Decision Support Systems for a more effective environmental planning of coastal area.

Analysis on Transportation Infrastructure Availability to Achieve Environmental and Social Sustainability in Karawang

NASA Astrophysics Data System (ADS)

Rarasati, A. D.; Octoria, N. B.

2018-03-01

Sustainable infrastructure is the key to development success. At the same time, transportation infrastructure development will involve social and environmental conditions of the local surroundings. Assessment of the availability of such transport infrastructure is one of the solutions adapted from social and environmental impacts. By conducting a correlation test, the presence of transportation infrastructure and the social conditions of the environment can be identified. The results obtained show that the accessibility, the level of security, and the level of equality are correlated to social and environmental sustainability in Karawang. In terms of environment, the availability of transportation infrastructure is not directly related to the impact of environmental sustainability. The impact of the perceived environment also has no effect on the journey. Correlation results indicate that the length of travel time and congestion level do not make the perceived impact greater. The impact of the perceived environment is merely due to the high utilization of private vehicles in Karawang which subsequently leads to higher energy consumption.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin Shoufu, E-mail: linshf2003@126.co; Zhao Dingtao, E-mail: box@ustc.edu.c; Marinova, Dora, E-mail: D.Marinova@curtin.edu.a

Assuming that energy consumption is the main source of GHG emissions in China, this paper analyses the effect of population, urbanisation level, GDP per capita, industrialisation level and energy intensity on the country's environmental impact using the STIRPAT model with data for 1978-2006. The analysis shows that population has the largest potential effect on environmental impact, followed by urbanisation level, industrialisation level, GDP per capita and energy intensity. Hence, China's One Child Policy, which restrains rapid population growth, has been an effective way of reducing the country's environmental impact. However, due to the difference in growth rates, GDP per capitamore » had a higher effect on the environmental impact, contributing to 38% of its increase (while population's contribution was at 32%). The rapid decrease in energy intensity was the main factor restraining the increase in China's environmental impact but recently it has also been rising. Against this background, the future of the country looks bleak unless a change in human behaviour towards more ecologically sensitive economic choices occurs.« less

32 CFR 651.55 - Categorical exclusions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Effects of Major Army Action Abroad § 651.55... environmental impacts of major actions abroad and in the global commons, in accordance with DODD 6050.7 (or DODI...

77 FR 41362 - Okanagan Specialty Fruits, Inc.; Availability of Petition for Determination of Nonregulated...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

..._16101p.pdf . FOR FURTHER INFORMATION CONTACT: Dr. John Turner, Director, Environmental Risk Analysis... risk and the appropriate environmental documentation--either an environmental assessment (EA) or an... environmental and interrelated economic issues and impacts that APHIS may determine should be considered in our...

77 FR 74181 - Inside Passage Electric Cooperative; Alaska; Notice of Availability of Environmental Assessment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... Electric Cooperative; Alaska; Notice of Availability of Environmental Assessment In accordance with the National Environmental Policy Act of 1969 and the Federal Energy Regulatory Commission's (Commission's or... staff's analysis of the potential environmental impacts of the project and concludes that licensing the...

Analysis of the Environmental Impact on Remanufacturing Wind Turbines

NASA Astrophysics Data System (ADS)

Sosa Skrainka, Manuel R.

To deliver clean energy the use of wind turbines is essential. In June 2011 there was an installed wind capacity equivalent to 211,000MW world-wide (WWEA, 2011). By the end of the year 2009 the U.S. had 35,100MW of wind energy installed capacity to generate electricity (AWEA, 2010). This industry has grown in recent years and is expected to grow even more in the future. The environmental impacts that will arise from the increased number of wind turbines and their end-of-life should be addressed, as large amounts of resources will be required to satisfy the current and future market demands for wind turbines. Since future 10MW wind turbines are expected to be as heavy as 1000 tons each, the study of the environmental response of profitable retirement strategies, such as remanufacturing for these machines, must be considered. Because of the increased number of wind turbines and the materials used, this study provides a comparison between the environmental impacts from remanufacturing the components installed inside the nacelle of multi-megawatt wind turbines and wind turbines manufactured using new components. The study methodology is the following: • Describe the life-cycle and the materials and processes employed for the manufacture and remanufacturing for components inside the nacelle. • Identify remanufacturing alternatives for the components inside the nacelle at the end of the expected life-time service of wind turbines. • Evaluate the environmental impacts from the remanufactured components and compare the results with the impacts of the manufacturing of new components using SimaPro. • Conduct sensitivity analysis over the critical parameters of the life cycle assessment • Propose the most environmentally friendly options for the retirement of each major component of wind turbines. After an analysis of the scenarios the goal of the study is to evaluate remanufacturing as an end-of-life option from an environmental perspective for commercial multi-megawatt wind turbines targeted for secondary wind turbine markets.

Development of an environmental impact model for the steel industry in Libya

NASA Astrophysics Data System (ADS)

Zaghinin, Mansur Salem

The global demand for steel is rising due to the infrastructural development of emergent economies in countries such as India, China, Thailand and Libya. Consequently, global steel production has increased dramatically and is expected to grow further in the future. Processing iron and steel is associated with a number of sustainable development challenges, including various economic, environmental and social issues. The increasing prominence of environmental issues in international and national political discourse, including the developing countries, means that stakeholders demand that manufacturers minimise the negative impacts of their operations.The steel industry must be able to measure and assess its environmental impacts and demonstrate continuous improvements. This requires an environmental management strategy to manage and minimise impacts on the environment. This study focuses on developing an environmental impacts model in steel industry to investigate the most important environmental parameters and their importance in order to mitigate environmental impacts.Based on the literature review and the elements that are considered as waste (derived from the waste survey in Libyan iron and steel industry), the potential environmental impacts of the steel industry are identified as criteria and sub-criteria. Then, a model is built using the Analytical Hierarchy Process (AHP) software based on the identified criteria and sub-criteria.The model also illustrates the overall goal which is creating environmental impacts model for steel industry, in addition, criteria and sub-criteria are listed to clarify the situation and make the analysis clearer and understandable. Pair wise comparisons are used to derive accurate ratio scale priorities.The results are analysed and presented as prioritised list of environmental impacts. Moreover, a series of sensitivity analyses are conducted to investigate the impact of changing the priority of the criteria on the alternatives' ranking. The validation of the proposed model is carried out to assess its validity and to see this model from the perspectives of the professionals from steel industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weldu, Yemane W., E-mail: ywweldem@ucalgary.ca; Assefa, Getachew; Athena Chair in Life Cycle Assessment in Design

A roadmap for a more sustainable energy strategy is complex, as its development interacts critically with the economic, social, and environmental dimensions of sustainable development. This paper applied an impact matrix method to evaluate the environmental sustainability and to identify the desirable policy objectives of biomass-based energy strategy for the case of Alberta. A matrix with the sustainability domains on one axis and areas of environmental impact on the other was presented to evaluate the nexus effect of policy objectives and bioenergy production. As per to our analysis, economic diversification, technological innovation, and resource conservation came up as the desirablemore » policy objectives of sustainable development for Alberta because they demonstrated environmental benefits in all environmental impact categories, namely climate change, human health, and ecosystem. On the other hand, human health and ecosystem impacts were identified as trade-offs when the policy objectives for sustainability were energy security, job creation, and climate change. Thus, bioenergy can mitigate climate change but may impact human health and ecosystem which then in turn can become issues of concern. Energy strategies may result in shifting of risks from one environmental impact category to another, and from one sustainable domain to another if the technical and policy-related issues are not identified.« less

CAPACITY BUILDING PROCESS IN ENVIRONMENTAL AND HEALTH IMPACT ASSESSMENT FOR A THAI COMMUNITY.

PubMed

Chaithui, Suthat; Sithisarankul, Pornchai; Hengpraprom, Sarunya

2017-03-01

This research aimed at exploring the development of the capacitybuilding process in environmental and health impact assessment, including the consideration of subsequent, capacity-building achievements. Data were gathered through questionnaires, participatory observations, in-depth interviews, focus group discussions, and capacity building checklist forms. These data were analyzed using content analysis, descriptive statistics, and inferential statistics. Our study used the components of the final draft for capacity-building processes consisting of ten steps that were formulated by synthesis from each respective process. Additionally, the evaluation of capacity building levels was performed using 10-item evaluation criteria for nine communities. The results indicated that the communities performed well under these criteria. Finally, exploration of the factors influencing capacity building in environmental and health impact assessment indicated that the learning of community members by knowledge exchange via activities and study visits were the most influential factors of the capacity building processes in environmental and health impact assessment. The final revised version of capacitybuilding process in environmental and health impact assessment could serve as a basis for the consideration of interventions in similar areas, so that they increased capacity in environmental and health impact assessments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Longgao; Yang, Xiaoyan; School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application ofmore » LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.« less

7 CFR 1940.320 - Preparing EISs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS (CONTINUED) GENERAL Environmental Program § 1940.320 Preparing EISs. (a) Responsibility. Whenever... implementation of the State's environmental impact analysis requirement, if one has been enacted or promulgated... of the natural and social sciences and the environmental design arts. The disciplines of the...

Addressing environmental justice under the National Environment Policy Act at Sandia National Laboratories/New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cohen, T.M.; Bleakly, D.R.

1997-04-01

Under Executive Order 12898, Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations, the Department of Energy (DOE) and Sandia National Laboratories New Mexico (SNL) are required to identify and address, as appropriate, disproportionately high, adverse human health or environmental effects of their activities on minority and low-income populations. The National Environmental Policy Act (NEPA) also requires that environmental justice issues be identified and addressed. This presents a challenge for SNL because it is located in a culturally diverse area. Successfully addressing potential impacts is contingent upon accurately identifying them through objective analysis of demographic information. However,more » an effective public participation process, which is necessarily subjective, is also needed to understand the subtle nuances of diverse populations that can contribute to a potential impact, yet are not always accounted for in a strict demographic profile. Typically, there is little or no coordination between these two disparate processes. This report proposes a five-step method for reconciling these processes and uses a hypothetical case study to illustrate the method. A demographic analysis and community profile of the population within 50 miles of SNL were developed to support the environmental justice analysis process and enhance SNL`s NEPA and public involvement programs. This report focuses on developing a methodology for identifying potentially impacted populations. Environmental justice issues related to worker exposures associated with SNL activities will be addressed in a separate report.« less

An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Xiaodong, E-mail: eastdawn@tsinghua.edu.cn; Su, Shu, E-mail: sushuqh@163.com; Zhang, Zhihui, E-mail: zhzhg@tsinghua.edu.cn

To comprehensively pre-evaluate the damages to both the environment and human health due to construction activities in China, this paper presents an integrated building environmental and health performance (EHP) assessment model based on the Building Environmental Performance Analysis System (BEPAS) and the Building Health Impact Analysis System (BHIAS) models and offers a new inventory data estimation method. The new model follows the life cycle assessment (LCA) framework and the inventory analysis step involves bill of quantity (BOQ) data collection, consumption data formation, and environmental profile transformation. The consumption data are derived from engineering drawings and quotas to conduct the assessmentmore » before construction for pre-evaluation. The new model classifies building impacts into three safeguard areas: ecosystems, natural resources and human health. Thus, this model considers environmental impacts as well as damage to human wellbeing. The monetization approach, distance-to-target method and panel method are considered as optional weighting approaches. Finally, nine residential buildings of different structural types are taken as case studies to test the operability of the integrated model through application. The results indicate that the new model can effectively pre-evaluate building EHP and the structure type significantly affects the performance of residential buildings.« less

A life cycle assessment of environmental performances of two combustion- and gasification-based waste-to-energy technologies.

PubMed

Arena, Umberto; Ardolino, Filomena; Di Gregorio, Fabrizio

2015-07-01

An attributional life cycle analysis (LCA) was developed to compare the environmental performances of two waste-to-energy (WtE) units, which utilize the predominant technologies among those available for combustion and gasification processes: a moving grate combustor and a vertical shaft gasifier coupled with direct melting. The two units were assumed to be fed with the same unsorted residual municipal waste, having a composition estimated as a European average. Data from several plants in operation were processed by means of mass and energy balances, and on the basis of the flows and stocks of materials and elements inside and throughout the two units, as provided by a specific substance flow analysis. The potential life cycle environmental impacts related to the operations of the two WtE units were estimated by means of the Impact 2002+ methodology. They indicate that both the technologies have sustainable environmental performances, but those of the moving grate combustion unit are better for most of the selected impact categories. The analysis of the contributions from all the stages of each specific technology suggests where improvements in technological solutions and management criteria should be focused to obtain further and remarkable environmental improvements. Copyright © 2015 Elsevier Ltd. All rights reserved.

Final Environmental Assessment for Shared Use Paths (SUP), Eglin Air Force Base, Florida

DTIC Science & Technology

2011-07-01

NEPA; 40 Code of Federal Regulations [CFR] 1500-1508); the USAF environmental impact analysis process as effectuated by 32 CFR Part 989; and DoD...alternatives were considered, but not carried forward for analysis . Alternative B This alternative would consist of constructing a 10’ wide SUP...EA Section 2.3.1, page 12) No-Action Alternative This alternative also was carried forward for analysis . (EA Section 2.4.1, page 16) ENVIRONMENTAL

32 CFR 989.25 - Base closure and realignment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Base closure and realignment. 989.25 Section 989... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.25 Base closure and realignment. Base closure or realignment may entail special requirements for environmental analysis. The permanent base closure...

32 CFR 989.25 - Base closure and realignment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Base closure and realignment. 989.25 Section 989... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.25 Base closure and realignment. Base closure or realignment may entail special requirements for environmental analysis. The permanent base closure...

Appendix E: Research papers. Use of remote sensing in landscape stratification for environmental impact assessment

NASA Technical Reports Server (NTRS)

Stanturf, J. A.; Heimbuch, D. G.

1980-01-01

A refinement to the matrix approach to environmental impact assessment is to use landscape units in place of separate environmental elements in the analysis. Landscape units can be delineated by integrating remotely sensed data and available single-factor data. A remote sensing approach to landscape stratification is described and the conditions under which it is superior to other approaches that require single-factor maps are indicated. Flowcharts show the steps necessary to develop classification criteria, delineate units and a map legend, and use the landscape units in impact assessment. Application of the approach to assessing impacts of a transmission line in Montana is presented to illustrate the method.

Environmental impact of PV cell waste scenario.

PubMed

Bogacka, M; Pikoń, K; Landrat, M

2017-12-01

Rapid growth of the volume of waste from PV cells is expected in the following years. The problem of its utilization seems to be the most important issue for future waste management systems. The environmental impacts of the PV recycling scenario are presented in the manuscript. The analysis is based on the LCA approach and the average data available in specialized databases for silicon standard PV cell is used. The functional unit includes parameters like: efficiency, composition, surface area. The discussion on the environmental impact change due to the location of the PV production and waste processing plants is presented in the manuscript. Additionally, the discussion on the environmental effect of substituting different energy resources with PV cells is presented in the manuscript. The analysis of the PV cell life cycle scenario presented in the article was performed using the SIMA PRO software and data from Ecoinvent 3.0 database together with additional data obtained from other sources. Copyright © 2017 Elsevier Ltd. All rights reserved.

78 FR 23207 - Availability of an Environmental Assessment for Field Testing of a Yersinia Pestis Vaccine, Live...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2013-0020... could have on the quality of the human environment. Based on the risk analysis and other relevant data... a significant impact on the quality of the human environment, and that an environmental impact...

Impact of environmental factors on the demographic characteristics in Tomsk Oblast (Russia, 1980-2015)

NASA Astrophysics Data System (ADS)

Pugacheva, E.; Mezhibor, A.; Makarenko, T.

2016-09-01

The research represents the analysis of essential demographic indexes in Tomsk Oblast (Russia): birth-rate, death-rate, natural increase (1980-2015), migration increase (19972014), and child mortality (1990-2015). Environmental factors were determined as influencing the health and as a consequence, having the impact on the demographic characteristics of the studied region.

75 FR 78978 - Record of Decision for the 158th Fighter Wing's Proposed Realignment of National Guard Avenue and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... resources and personnel). The decision was based on matters discussed in the Final Environmental Impact... from the public and regulatory agencies, and other relevant factors. The Final EIS was made available... NEPA of 1969 (42 USC. 4321, et seq.) and the Air Force's Environmental Impact Analysis Process (EIAP...

Environmental Impact Analysis Process. Environmental Impact Statement. Supersonic Flight Operations in the Reserve Military Operations Area, Holloman AFB, New Mexico

DTIC Science & Technology

1983-09-01

tailed Rattlesnake Crotalus molossus Western Rattlesnake Crotalus viridis CAUTION Most snake bites occur to people who are trying to kill or catch snakes...Strawberry Fragaria bracteata Yarrow Achillea lanulosa Yellow Sweetclover Melilotus indicus IX L-2 List of Preparers Jim Battis; AFGL/LWH, Ha’-com

75 FR 12217 - Notice of Availability for Comments Regarding the Planned Environmental Assessment Interim Report...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-15

... public comments for a planned Environmental Assessment. The Corps is directed to conduct a study of.... The study is structured as a series of interim reports. Interim Report IIIa, limited to the impacts of.... Comments are requested to assist in determining the level of analysis and impacts to be considered for...

Remote Sensing of the Environmental Impacts of Utility-Scale Solar Energy Plants

NASA Astrophysics Data System (ADS)

Edalat, Mohammad Masih

Solar energy has many environmental benefits compared with fossil fuels but solar farming can have environmental impacts especially during construction and development. Thus, in order to enhance environmental sustainability, it is imperative to understand the environmental impacts of utility-scale solar energy (USSE) plants. During recent decades, remote sensing techniques and geographic information systems have become standard techniques in environmental applications. In this study, the environmental impacts of USSE plants are investigated by analyzing changes to land surface characteristics using remote sensing. The surface characteristics studied include land cover, land surface temperature, and hydrological response whereas changes are mapped by comparing pre-, syn-, and post- construction conditions. In order to study the effects of USSE facilities on land cover, the changes in the land cover are measured and analyzed inside and around two USSE facilities. The principal component analysis (PCA), minimum noise fraction (MNF), and spectral mixture analysis (SMA) of remote sensing images are used to estimate the subpixel fraction of four land surface endmembers: high-albedo, low-albedo, shadow, and vegetation. The results revealed that USSE plants do not significantly impact land cover outside the plant boundary. However, land-cover radiative characteristics within the plant area are significantly affected after construction. During the construction phase, site preparation practices including shrub removal and land grading increase high-albedo and decrease low-albedo fractions. The thermal effects of USSE facilities are studied by the time series analysis of remote sensing land surface temperature (LST). A statistical trend analysis of LST, with seasonal trends removed is performed with a particular consideration of panel shadowing by analyzing sun angles for different times of year. The results revealed that the LST outside the boundary of the solar plant does not change, whereas it significantly decreases inside the plant at 10 AM after the construction. The decrease in LST mainly occurred in winters due to lower sun's altitude, which casts longer shadows on the ground. In order to study the hydrological impacts of PV plants, pre- and post-installation hydrological response over single-axis technology is compared. A theoretical reasoning is developed to explain flows under the influence of PV panels. Moreover, a distributed parametric hydrologic model is used to estimate runoff before and after the construction of PV plants. The results revealed that peak flow, peak flow time, and runoff volume alter after panel installation. After panel installation, peak flow decreases and is observed to shift in time, which depends on orientation. Likewise, runoff volume increases irrespective of panel orientation. The increase in the tilt angle of panel results in decrease in the peak flow, peak flow time, and runoff. This study provides an insight into the environmental impacts of USSE development using remote sensing. The research demonstrates that USSE plants are environmentally sustainable due to minimal impact on land cover and surface temperature in their vicinity. In addition, this research explains the role of rainfall shadowing on hydrological behavior at USSE plants.

Environmental Impact Assessment and End-of-Life Treatment Policy Analysis for Li-Ion Batteries and Ni-MH Batteries

PubMed Central

Yu, Yajuan; Chen, Bo; Huang, Kai; Wang, Xiang; Wang, Dong

2014-01-01

Based on Life Cycle Assessment (LCA) and Eco-indicator 99 method, a LCA model was applied to conduct environmental impact and end-of-life treatment policy analysis for secondary batteries. This model evaluated the cycle, recycle and waste treatment stages of secondary batteries. Nickel-Metal Hydride (Ni-MH) batteries and Lithium ion (Li-ion) batteries were chosen as the typical secondary batteries in this study. Through this research, the following results were found: (1) A basic number of cycles should be defined. A minimum cycle number of 200 would result in an obvious decline of environmental loads for both battery types. Batteries with high energy density and long life expectancy have small environmental loads. Products and technology that help increase energy density and life expectancy should be encouraged. (2) Secondary batteries should be sorted out from municipal garbage. Meanwhile, different types of discarded batteries should be treated separately under policies and regulations. (3) The incineration rate has obvious impact on the Eco-indicator points of Nickel-Metal Hydride (Ni-MH) batteries. The influence of recycle rate on Lithium ion (Li-ion) batteries is more obvious. These findings indicate that recycling is the most promising direction for reducing secondary batteries’ environmental loads. The model proposed here can be used to evaluate environmental loads of other secondary batteries and it can be useful for proposing policies and countermeasures to reduce the environmental impact of secondary batteries. PMID:24646862

Environmental impact assessment and end-of-life treatment policy analysis for Li-ion batteries and Ni-MH batteries.

PubMed

Yu, Yajuan; Chen, Bo; Huang, Kai; Wang, Xiang; Wang, Dong

2014-03-18

Based on Life Cycle Assessment (LCA) and Eco-indicator 99 method, a LCA model was applied to conduct environmental impact and end-of-life treatment policy analysis for secondary batteries. This model evaluated the cycle, recycle and waste treatment stages of secondary batteries. Nickel-Metal Hydride (Ni-MH) batteries and Lithium ion (Li-ion) batteries were chosen as the typical secondary batteries in this study. Through this research, the following results were found: (1) A basic number of cycles should be defined. A minimum cycle number of 200 would result in an obvious decline of environmental loads for both battery types. Batteries with high energy density and long life expectancy have small environmental loads. Products and technology that help increase energy density and life expectancy should be encouraged. (2) Secondary batteries should be sorted out from municipal garbage. Meanwhile, different types of discarded batteries should be treated separately under policies and regulations. (3) The incineration rate has obvious impact on the Eco-indicator points of Nickel-Metal Hydride (Ni-MH) batteries. The influence of recycle rate on Lithium ion (Li-ion) batteries is more obvious. These findings indicate that recycling is the most promising direction for reducing secondary batteries' environmental loads. The model proposed here can be used to evaluate environmental loads of other secondary batteries and it can be useful for proposing policies and countermeasures to reduce the environmental impact of secondary batteries.

Combining U.S.-based prioritization tools to improve screening level accountability for environmental impact: the case of the chemical manufacturing industry.

PubMed

Zhou, Xiaoying; Schoenung, Julie M

2009-12-15

There are two quantitative indicators that are most widely used to assess the extent of compliance of industrial facilities with environmental regulations: the quantity of hazardous waste generated and the amount of toxics released. These indicators, albeit useful in terms of some environmental monitoring, fail to account for direct or indirect effects on human and environmental health, especially when aggregating total quantity of releases for a facility or industry sector. Thus, there is a need for a more comprehensive approach that can prioritize a particular chemical (or industry sector) on the basis of its relevant environmental performance and impact on human health. Accordingly, the objective of the present study is to formulate an aggregation of tools that can simultaneously capture multiple effects and several environmental impact categories. This approach allows us to compare and combine results generated with the aid of select U.S.-based quantitative impact assessment tools, thereby supplementing compliance-based metrics such as data from the U.S. Toxic Release Inventory. A case study, which presents findings for the U.S. chemical manufacturing industry, is presented to illustrate the aggregation of these tools. Environmental impacts due to both upstream and manufacturing activities are also evaluated for each industry sector. The proposed combinatorial analysis allows for a more robust evaluation for rating and prioritizing the environmental impacts of industrial waste.

Public Participation Planning of Environmental Impact Assessment (EIA) and Regulations: Analysis of Inconsistency for Some Cases in Indonesia

NASA Astrophysics Data System (ADS)

Hindrayani, Aniek; Purwanto

2018-02-01

The failure in community involvement during the environmental documents planning may result in the failure of the planned project implementation. This study aims to determine the gap between practices and regulations that apply to the process of community involvement in the environmental documents planning, and find out inconsistency of implementation on each stakeholder in the planning of the Environmental Impact Assessment (EIA) and the environmental permit. The method used was qualitative through interview and literature study which is analyzed using triangulation model and presented in the form of concept map. The results of the study indicate that 1) the determination of community representatives based on the criteria of the impacted communities is not clearly described, 3) suggestions, opinions, and responses to the environmental impact management are not well implemented by the project proponent, 3) implementation of the environmental management of other licensed activities affecting the behavior (4) stakeholders (project proponent, EIA consultants, and EIA appraisal committee) do not play their role as mandated in applicable legislation.

Envirotyping for deciphering environmental impacts on crop plants.

PubMed

Xu, Yunbi

2016-04-01

Global climate change imposes increasing impacts on our environments and crop production. To decipher environmental impacts on crop plants, the concept "envirotyping" is proposed, as a third "typing" technology, complementing with genotyping and phenotyping. Environmental factors can be collected through multiple environmental trials, geographic and soil information systems, measurement of soil and canopy properties, and evaluation of companion organisms. Envirotyping contributes to crop modeling and phenotype prediction through its functional components, including genotype-by-environment interaction (GEI), genes responsive to environmental signals, biotic and abiotic stresses, and integrative phenotyping. Envirotyping, driven by information and support systems, has a wide range of applications, including environmental characterization, GEI analysis, phenotype prediction, near-iso-environment construction, agronomic genomics, precision agriculture and breeding, and development of a four-dimensional profile of crop science involving genotype (G), phenotype (P), envirotype (E) and time (T) (developmental stage). In the future, envirotyping needs to zoom into specific experimental plots and individual plants, along with the development of high-throughput and precision envirotyping platforms, to integrate genotypic, phenotypic and envirotypic information for establishing a high-efficient precision breeding and sustainable crop production system based on deciphered environmental impacts.

IN SITU ASSESSMENT OF GENOTOXIC HAZARDS OF ENVIRONMENTAL POLLUTION

EPA Science Inventory

The potential impact of environmental pollutants on human health can be evaluated by laboratory analysis of environmental samples or by measurement of biological effects on indigenous populations and/or specific test organisms placed in the environment to be monitored. he organis...

Environmental impact assessment for alternative-energy power plants in México.

PubMed

González-Avila, María E; Beltrán-Morales, Luis Felipe; Braker, Elizabeth; Ortega-Rubio, Alfredo

2006-07-01

Ten Environmental Impact Assessment Reports (EIAR) were reviewed for projects involving alternative power plants in Mexico developed during the last twelve years. Our analysis focused on the methods used to assess the impacts produced by hydroelectric and geothermal power projects. These methods used to assess impacts in EIARs ranged from the most simple, descriptive criteria, to quantitative models. These methods are not concordant with the level of the EIAR required by the environmental authority or even, with the kind of project developed. It is concluded that there is no correlation between the tools used to assess impacts and the assigned type of the EIAR. Because the methods to assess impacts produced by these power projects have not changed during 2000 years, we propose a quantitative method, based on ecological criteria and tools, to assess the impacts produced by hydroelectric and geothermal plants, according to the specific characteristics of the project. The proposed method is supported by environmental norms, and can assist environmental authorities in assigning the correct level and tools to be applied to hydroelectric and geothermal projects. The proposed method can be adapted to other production activities in Mexico and to other countries.

77 FR 24845 - Approval and Promulgation of Implementation Plans; South Dakota; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... various pollution controls in its BART analysis for Big Stone I, its cost impact analysis is skewed in... took into account the State's consideration of environmental impacts when reviewing the Big Stone I SO... shutdown are part of normal operations at facilities like Big Stone, and because these emissions impact...

43 CFR 3420.3-4 - Regional tract ranking, selection, environmental analysis and scheduling.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Regional tract ranking, selection...) COMPETITIVE LEASING Competitive Leasing § 3420.3-4 Regional tract ranking, selection, environmental analysis... natural environment; and socioeconomic impacts. The subfactors the regional coal team will consider under...

10 CFR 51.92 - Supplement to the final environmental impact statement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... changes in the proposed action that are relevant to environmental concerns; or (2) There are new and..., technical, and other benefits and costs of the proposed action, to the extent that the final environmental... costs; (5) Include an analysis of other energy alternatives, to the extent that the final environmental...

Technical- and environmental-efficiency analysis of irrigated cotton-cropping systems in Punjab, Pakistan using data envelopment analysis.

PubMed

Ullah, Asmat; Perret, Sylvain R

2014-08-01

Cotton cropping in Pakistan uses substantial quantities of resources and adversely affects the environment with pollutants from the inputs, particularly pesticides. A question remains regarding to what extent the reduction of such environmental impact is possible without compromising the farmers' income. This paper investigates the environmental, technical, and economic performances of selected irrigated cotton-cropping systems in Punjab to quantify the sustainability of cotton farming and reveal options for improvement. Using mostly primary data, our study quantifies the technical, cost, and environmental efficiencies of different farm sizes. A set of indicators has been computed to reflect these three domains of efficiency using the data envelopment analysis technique. The results indicate that farmers are broadly environmentally inefficient; which primarily results from poor technical inefficiency. Based on an improved input mix, the average potential environmental impact reduction for small, medium, and large farms is 9, 13, and 11 %, respectively, without compromising the economic return. Moreover, the differences in technical, cost, and environmental efficiencies between small and medium and small and large farm sizes were statistically significant. The second-stage regression analysis identifies that the entire farm size significantly affects the efficiencies, whereas exposure to extension and training has positive effects, and the sowing methods significantly affect the technical and environmental efficiencies. Paradoxically, the formal education level is determined to affect the efficiencies negatively. This paper discusses policy interventions that can improve the technical efficiency to ultimately increase the environmental efficiency and reduce the farmers' operating costs.

Environmental Impacts and Hotspots of Food Losses: Value Chain Analysis of Swiss Food Consumption.

PubMed

Beretta, Claudio; Stucki, Matthias; Hellweg, Stefanie

2017-10-03

Reducing food losses and waste is crucial to making our food system more efficient and sustainable. This is the first paper that quantifies the environmental impacts of food waste by distinguishing the various stages of the food value chain, 33 food categories that represent the whole food basket in Switzerland, and including food waste treatment. Environmental impacts are expressed in terms of climate change and biodiversity impacts due to water and land use. Climate change impacts of food waste are highest for fresh vegetables, due to the large amounts wasted, while the specific impact per kg is largest for beef. Biodiversity impacts are mainly caused by cocoa and coffee (16% of total) and by beef (12%). Food waste at the end of the food value chain (households and food services) causes almost 60% of the total climate impacts of food waste, because of the large quantities lost at this stage and the higher accumulated impacts per kg of product. The net environmental benefits from food waste treatment are only 5-10% of the impacts from production and supply of the wasted food. Thus, avoiding food waste should be a first-line priority, while optimizing the method of treatment is less relevant.

Multicriteria decision analysis applied to Glen Canyon Dam

USGS Publications Warehouse

Flug, M.; Seitz, H.L.H.; Scott, J.F.

2000-01-01

Conflicts in water resources exist because river-reservoir systems are managed to optimize traditional benefits (e.g., hydropower and flood control), which are historically quantified in economic terms, whereas natural and environmental resources, including in-stream and riparian resources, are more difficult or impossible to quantify in economic terms. Multicriteria decision analysis provides a quantitative approach to evaluate resources subject to river basin management alternatives. This objective quantification method includes inputs from special interest groups, the general public, and concerned individuals, as well as professionals for each resource considered in a trade-off analysis. Multicriteria decision analysis is applied to resources and flow alternatives presented in the environmental impact statement for Glen Canyon Dam on the Colorado River. A numeric rating and priority-weighting scheme is used to evaluate 29 specific natural resource attributes, grouped into seven main resource objectives, for nine flow alternatives enumerated in the environmental impact statement.

On Improving the Quality and Interpretation of Environmental Assessments using Statistical Analysis and Geographic Information Systems

NASA Astrophysics Data System (ADS)

Karuppiah, R.; Faldi, A.; Laurenzi, I.; Usadi, A.; Venkatesh, A.

2014-12-01

An increasing number of studies are focused on assessing the environmental footprint of different products and processes, especially using life cycle assessment (LCA). This work shows how combining statistical methods and Geographic Information Systems (GIS) with environmental analyses can help improve the quality of results and their interpretation. Most environmental assessments in literature yield single numbers that characterize the environmental impact of a process/product - typically global or country averages, often unchanging in time. In this work, we show how statistical analysis and GIS can help address these limitations. For example, we demonstrate a method to separately quantify uncertainty and variability in the result of LCA models using a power generation case study. This is important for rigorous comparisons between the impacts of different processes. Another challenge is lack of data that can affect the rigor of LCAs. We have developed an approach to estimate environmental impacts of incompletely characterized processes using predictive statistical models. This method is applied to estimate unreported coal power plant emissions in several world regions. There is also a general lack of spatio-temporal characterization of the results in environmental analyses. For instance, studies that focus on water usage do not put in context where and when water is withdrawn. Through the use of hydrological modeling combined with GIS, we quantify water stress on a regional and seasonal basis to understand water supply and demand risks for multiple users. Another example where it is important to consider regional dependency of impacts is when characterizing how agricultural land occupation affects biodiversity in a region. We developed a data-driven methodology used in conjuction with GIS to determine if there is a statistically significant difference between the impacts of growing different crops on different species in various biomes of the world.

Supplemental final environmental impact statement for advanced solid rocket motor testing at Stennis Space Center

NASA Technical Reports Server (NTRS)

1990-01-01

Since the Final Environmental Impact Statement (FEIS) and Record of Decision on the FEIS describing the potential impacts to human health and the environment associated with the program, three factors have caused NASA to initiate additional studies regarding these issues. These factors are: (1) The U.S. Army Corps of Engineers and the Environmental Protection Agency (EPA) agreed to use the same comprehensive procedures to identify and delineate wetlands; (2) EPA has given NASA further guidance on how best to simulate the exhaust plume from the Advanced Solid Rocket Motor (ASRM) testing through computer modeling, enabling more realistic analysis of emission impacts; and (3) public concerns have been raised concerning short and long term impacts on human health and the environment from ASRM testing.

From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study.

PubMed

Gu, Fu; Guo, Jianfeng; Zhang, Wujie; Summers, Peter A; Hall, Philip

2017-12-01

Mechanical recycling of waste plastics is an environmental solution to the problem of waste plastic disposal, and has already become a common practice in industry. However, limited information can be found on either the industralised plastic recycling or the recycled materials, despite the use of recycled plastics has already extended to automobile production. This study investigates the life cycle environmental impacts of mechanical plastic recycling practice of a plastic recycling company in China. Waste plastics from various sources, such as agricultural wastes, plastic product manufacturers, collected solid plastic wastes and parts dismantled from waste electric and electronic equipments, are processed in three routes with products end up in different markets. The results of life cycle assessments show that the extrusion process has the largest environmental impacts, followed by the use of fillers and additives. Compared to production of virgin plastics and composites, the mechanical recycling is proved to be a superior alternative in most environmental aspects. Substituting virgin plastic composites with recycled plastic composites has achieved the highest environmental benefits, as virgin composite production has an impact almost 4 times higher that of the recycled composite production in each ReCiPe endpoint damage factor. Sensitivity analysis shows that the coverage of collecting network contribute affect little to overall environmental impact, and centralisation plays an important role in reducing overall environmental impacts. Among the fillers and additives, impact modifiers account for the most significant contributions to the environmental impacts of recycled composites. This study provides necessary information about the existing industrialised plastic recycling practice, and recommendations are given. Research implications are presented with the purpose to achieve higher substitution rate and lower environmental impact. Copyright © 2017 Elsevier B.V. All rights reserved.

77 FR 12323 - Draft Environmental Impact Statement for the General Management Plan, Buck Island Reef National...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-29

...Pursuant to 42 U.S.C. 4332(2)(C) of the National Environmental Policy Act of 1969 and National Park Service (NPS) policy in Director's Order Number 2 (Park Planning) and Director's Order Number 12 (Conservation Planning, Environmental Impact Analysis, and Decision- making) the NPS announces the availability of a DEIS/GMP for Buck Island Reef National Monument, Virgin Islands. The document provides a framework for management, use, and development options for Buck Island Reef National Monument by the NPS for the next 15 to 20 years. It describes four management alternatives for consideration, including a No-Action Alternative that continues current management policies and the NPS's preferred alternative. The document analyzes the environmental impacts of the alternatives.

Environmental analysis of plastic production processes: comparing petroleum-based polypropylene and polyethylene with biologically-based poly-beta-hydroxybutyric acid using life cycle analysis.

PubMed

Harding, K G; Dennis, J S; von Blottnitz, H; Harrison, S T L

2007-05-31

Polymers based on olefins have wide commercial applicability. However, they are made from non-renewable resources and are characterised by difficulty in disposal where recycle and re-use is not feasible. Poly-beta-hydroxybutyric acid (PHB) provides one example of a polymer made from renewable resources. Before motivating its widespread use, the advantages of a renewable polymer must be weighed against the environmental aspects of its production. Previous studies relating the environmental impacts of petroleum-based and bio-plastics have centred on the impact categories of global warming and fossil fuel depletion. Cradle-to-grave studies report equivalent or reduced global warming impacts, in comparison to equivalent polyolefin processes. This stems from a perceived CO(2) neutral status of the renewable resource. Indeed, no previous work has reported the results of a life cycle assessment (LCA) giving the environmental impacts in all major categories. This study investigates a cradle-to-gate LCA of PHB production taking into account net CO(2) generation and all major impact categories. It compares the findings with similar studies of polypropylene (PP) and polyethylene (PE). It is found that, in all of the life cycle categories, PHB is superior to PP. Energy requirements are slightly lower than previously observed and significantly lower than those for polyolefin production. PE impacts are lower than PHB values in acidification and eutrophication.

40 CFR 51.850 - Prohibition.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engage in, support in any way or provide financial assistance for, license or permit, or approve any... Federal actions where either: (1) A National Environmental Policy Act (NEPA) analysis was completed as evidenced by a final environmental assessment (EA), environmental impact statement (EIS), or finding of no...

CHAPTER 9: PROTECTING ENVIRONMENTAL WELFARE: COMPARISON OF EMERGETIC AND ECONOMIC VALUATION

EPA Science Inventory

To protect human and environmental welfare, the US EPA aims to base environmental regulations and policies on sound scientific and, where possible, economic analyses. The EPA has accordingly conducted analysis of the economic impact of regulations for three decades but has yet ...

A system approach for reducing the environmental impact of manufacturing and sustainability improvement of nano-scale manufacturing

NASA Astrophysics Data System (ADS)

Yuan, Yingchun

This dissertation develops an effective and economical system approach to reduce the environmental impact of manufacturing. The system approach is developed by using a process-based holistic method for upstream analysis and source reduction of the environmental impact of manufacturing. The system approach developed consists of three components of a manufacturing system: technology, energy and material, and is useful for sustainable manufacturing as it establishes a clear link between manufacturing system components and its overall sustainability performance, and provides a framework for environmental impact reductions. In this dissertation, the system approach developed is applied for environmental impact reduction of a semiconductor nano-scale manufacturing system, with three case scenarios analyzed in depth on manufacturing process improvement, clean energy supply, and toxic chemical material selection. The analysis on manufacturing process improvement is conducted on Atomic Layer Deposition of Al2O3 dielectric gate on semiconductor microelectronics devices. Sustainability performance and scale-up impact of the ALD technology in terms of environmental emissions, energy consumption, nano-waste generation and manufacturing productivity are systematically investigated and the ways to improve the sustainability of the ALD technology are successfully developed. The clean energy supply is studied using solar photovoltaic, wind, and fuel cells systems for electricity generation. Environmental savings from each clean energy supply over grid power are quantitatively analyzed, and costs for greenhouse gas reductions on each clean energy supply are comparatively studied. For toxic chemical material selection, an innovative schematic method is developed as a visual decision tool for characterizing and benchmarking the human health impact of toxic chemicals, with a case study conducted on six chemicals commonly used as solvents in semiconductor manufacturing. Reliability of the schematic method is validated by comparing its benchmark results on 104 chemicals with that from the conventional Human Toxicity Potential (HTP) method. This dissertation concludes with discussions on environmental impact assessment of nanotechnologies and sustainability management of nano-particles. As nano-manufacturing is emerging for wide industrial applications, improvement and expansion of the system approach would be valuable for use in the environmental management of nano-manufacturing and in the risk control of nano-particles in the interests of public health and the environment.

Electromagnetic interference impact of the proposed emitters for the High Frequency Active Auroral Research Program (HAARP). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertshaw, G.A.; Snyder, A.L.; Weiner, M.M.

1993-05-14

The proposed HAARP emitters at the Gakona (Alaska) preferred site and at the Clear AFS (Alaska) alternative site are the Ionospheric Research Instrument (IRI), the Incoherent Scatter Radar (ISR), and the Vertical Incidence Sounder(VIS). The electromagnetic interference (EMI) impact of those emitters on receiving systems in the vicinity of the sites is estimated in this study. The results are intended for use as an input to the Air Force Environmental Impact Statement as part of the Environmental Impact Analysis Process.

Enantiomeric Profiling of Chiral Pharmacologically Active Compounds in the Environment with the Usage of Chiral Liquid Chromatography 
Coupled with Tandem Mass Spectrometry

PubMed Central

Camacho-Muñoz, Dolores; Petrie, Bruce; Castrignanò, Erika; Kasprzyk-Hordern, Barbara

2016-01-01

The issue of drug chirality is attracting increasing attention among the scientific community. The phenomenon of chirality has been overlooked in environmental research (environmental occurrence, fate and toxicity) despite the great impact that chiral pharmacologically active compounds (cPACs) can provoke on ecosystems. The aim of this paper is to introduce the topic of chirality and its implications in environmental contamination. Special attention has been paid to the most recent advances in chiral analysis based on liquid chromatography coupled with mass spectrometry and the most popular protein based chiral stationary phases. Several groups of cPACs of environmental relevance, such as illicit drugs, human and veterinary medicines were discussed. The increase in the number of papers published in the area of chiral environmental analysis indicates that researchers are actively pursuing new opportunities to provide better understanding of environmental impacts resulting from the enantiomerism of cPACs. PMID:27713682

Geothermal Impact Analysis | Geothermal Technologies | NREL

Science.gov Websites

on potential geothermal growth scenarios, jobs and economic impacts, clean energy manufacturing geothermal resources. We: Perform resource analysis Develop techno-economic models Quantify environmental growth scenarios across multiple market sectors. Learn more about the GeoVision Study. Jobs and Economic

Coal supply and cost under technological and environmental uncertainty

NASA Astrophysics Data System (ADS)

Chan, Melissa

This thesis estimates available coal resources, recoverability, mining costs, environmental impacts, and environmental control costs for the United States under technological and environmental uncertainty. It argues for a comprehensive, well-planned research program that will resolve resource uncertainty, and innovate new technologies to improve recovery and environmental performance. A stochastic process and cost (constant 2005) model for longwall, continuous, and surface mines based on current technology and mining practice data was constructed. It estimates production and cost ranges within 5-11 percent of 2006 prices and production rates. The model was applied to the National Coal Resource Assessment. Assuming the cheapest mining method is chosen to extract coal, 250-320 billion tons are recoverable. Two-thirds to all coal resource can be mined at a cost less than 4/mmBTU. If U.S. coal demand substantially increases, as projected by alternate Energy Information Administration (EIA), resources might not last more than 100 years. By scheduling cost to meet EIA projected demand, estimated cost uncertainty increases over time. It costs less than 15/ton to mine in the first 10 years of a 100 year time period, 10-30/ton in the following 50 years, and 15-$90/ton thereafter. Environmental impacts assessed are subsidence from underground mines, surface mine pit area, erosion, acid mine drainage, air pollutant and methane emissions. The analysis reveals that environmental impacts are significant and increasing as coal demand increases. Control technologies recommended to reduce these impacts are backfilling underground mines, surface pit reclamation, substitution of robotic underground mining systems for surface pit mining, soil replacement for erosion, placing barriers between exposed coal and the elements to avoid acid formation, and coalbed methane development to avoid methane emissions during mining. The costs to apply these technologies to meet more stringent environmental regulation scenarios are estimated. The results show that the cost of meeting these regulatory scenarios could increase mining costs two to six times the business as usual cost, which could significantly affect the cost of coal-powered electricity generation. This thesis provides a first estimate of resource availability, mining cost, and environmental impact assessment and cost analysis. Available resource is not completely reported, so the available estimate is lower than actual resource. Mining costs are optimized, so provide a low estimate of potential costs. Environmental impact estimates are on the high end of potential impact that may be incurred because it is assumed that impact is unavoidable. Control costs vary. Estimated cost to control subsidence and surface mine pit impacts are suitable estimates of the cost to reduce land impacts. Erosion control and robotic mining system costs are lower, and methane and acid mine drainage control costs are higher, than they may be in the case that these impacts must be reduced.

Billy Shaw Dam and Reservoir : Environmental Assessment and Finding of No Significant Impacts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

United States. Bonneville Power Administration; Shoshone-Paiute Tribes of the Duck Valley Reservation, Nevada.

This notice announces BPA`s decision to fund the construction, operation, and maintenance of the Billy Shaw Dam and Reservoir on the Duck Valley Reservation. This project is part of a continuing effort to address system-wide fish and wildlife losses caused by the development of the hydropower system in the Columbia River Basin. BPA has prepared an Environmental Assessment (EA) evaluating the potential environmental impacts of the proposed project. Based on the analysis in the EA, BPA has determined that the Proposed Action is not a major Federal action significantly affecting the quality of the human environment, within the meaning ofmore » the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement (EIS) is not required and BPA is issuing this FONSI.« less

Community Policing: A Preliminary Assessment of Environmental Impact with Panel Data on Program Implementation in U.S. Cities

ERIC Educational Resources Information Center

He, Ni; Zhao, Jihong; Lovrich, Nicholas P.

2005-01-01

This article examines the environmental impact on the programmatic implementation of community-oriented policing (COP) in large municipal police agencies during the 1990s. Three waves of nationwide surveys (1993, 1996, and 2000) based on a random sample of 281 municipalities and the corresponding police agencies were used for our analysis. Based…

Analysis and optimization of hybrid electric vehicle thermal management systems

NASA Astrophysics Data System (ADS)

Hamut, H. S.; Dincer, I.; Naterer, G. F.

2014-02-01

In this study, the thermal management system of a hybrid electric vehicle is optimized using single and multi-objective evolutionary algorithms in order to maximize the exergy efficiency and minimize the cost and environmental impact of the system. The objective functions are defined and decision variables, along with their respective system constraints, are selected for the analysis. In the multi-objective optimization, a Pareto frontier is obtained and a single desirable optimal solution is selected based on LINMAP decision-making process. The corresponding solutions are compared against the exergetic, exergoeconomic and exergoenvironmental single objective optimization results. The results show that the exergy efficiency, total cost rate and environmental impact rate for the baseline system are determined to be 0.29, ¢28 h-1 and 77.3 mPts h-1 respectively. Moreover, based on the exergoeconomic optimization, 14% higher exergy efficiency and 5% lower cost can be achieved, compared to baseline parameters at an expense of a 14% increase in the environmental impact. Based on the exergoenvironmental optimization, a 13% higher exergy efficiency and 5% lower environmental impact can be achieved at the expense of a 27% increase in the total cost.

[The inclusion of health in environmental impact studies: case report of a coal-fired power plant in Ceará State].

PubMed

Rigotto, Raquel Maria

2009-01-01

The study discusses the inclusion of health in the evaluation of environmental impacts to allow actors potentially involved in decision-making to determine the need and technological and geographic adequacy of projects ahead of implementation. The point of departure was a request from the Public Attorney to the Federal University of Ceará to analyze the project of a coal-fired power plant to be built within the Port of Pecém Industrial Compound in Ceará State, Brazil. The methodology included a description of the social and historical context of the area, a bibliographical study of health and environmental impacts and dialogues with affected communities, followed by an analysis of state environmental guidelines for this type of enterprise. The results shows the main categories of analysis identified and proposed additions to current regulations intended to anticipate relations between production processes, the environment and an uneven distribution of health impacts. Besides, it also assesses the need to advance the development of the approach in order to subsidize and democratize decision-making processes closer to actual circumstances in the present and near future.

Life cycle analysis of pistachio production in Greece.

PubMed

Bartzas, Georgios; Komnitsas, Kostas

2017-10-01

In the present paper, a life cycle assessment (LCA) study regarding pistachio (Pistacia vera L.) cultivation in Aegina island, Greece, was performed to evaluate the energy use footprint and the associated environmental impacts. In this context, a detailed life cycle inventory was created based on site-survey data and used for a holistic cradle-to-farm gate LCA analysis using the GaBi 6.5 software. The main impact categories assessed were acidification potential (AP), eutrophication potential (EP), global warming potential (GWP), ozone depletion potential (ODP), photochemical ozone creation potential (POCP) and cumulative energy demand (CED). In order to reveal the main environmental concerns pertinent to pistachio production and in turn propose measures for the reduction of environmental and energetic impacts, three scenarios were compared, namely the Baseline scenario (BS) that involves current cultivation practices, the Green Energy (GE) scenario that involves the use of biological fertilizers i.e. compost, and the Waste Utilization (WU) scenario that involves the production of biochar from pistachio and other agricultural wastes and its subsequent soil application to promote carbon sequestration and improve soil quality. Based on the results of this study, the use of compost for fertilization (GE scenario), which results in approximately 9% savings in terms of energy consumption and the five environmental impact categories studied compared to BS scenario, is considered a promising alternative cultivation strategy. Slightly higher savings (10% on average) in terms of the five calculated environmental impact categories, compared to the BS scenario, were indicated when the WU scenario was considered. Regarding energy consumption, the WU scenario results in minor increase, 3%, compared to the BS scenario. Results of uncertainty analysis performed using the Monte Carlo technique and contribution analysis showed that GE and WU scenarios offer reliable and significant eco-profile improvements for pistachio production in the study area compared to the current situation. Copyright © 2017 Elsevier B.V. All rights reserved.

Petroleum production at Maximum Efficient Rate Naval Petroleum Reserve No. 1 (Elk Hills), Kern County, California. Final Supplemental Environmental Impact Statement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-07-01

This document provides an analysis of the potential impacts associated with the proposed action, which is continued operation of Naval Petroleum Reserve No. I (NPR-1) at the Maximum Efficient Rate (MER) as authorized by Public law 94-258, the Naval Petroleum Reserves Production Act of 1976 (Act). The document also provides a similar analysis of alternatives to the proposed action, which also involve continued operations, but under lower development scenarios and lower rates of production. NPR-1 is a large oil and gas field jointly owned and operated by the federal government and Chevron U.SA Inc. (CUSA) pursuant to a Unit Planmore » Contract that became effective in 1944; the government`s interest is approximately 78% and CUSA`s interest is approximately 22%. The government`s interest is under the jurisdiction of the United States Department of Energy (DOE). The facility is approximately 17,409 acres (74 square miles), and it is located in Kern County, California, about 25 miles southwest of Bakersfield and 100 miles north of Los Angeles in the south central portion of the state. The environmental analysis presented herein is a supplement to the NPR-1 Final Environmental Impact Statement of that was issued by DOE in 1979 (1979 EIS). As such, this document is a Supplemental Environmental Impact Statement (SEIS).« less

[Comparative life cycle environmental assessment between electric taxi and gasoline taxi in Beijing].

PubMed

Shi, Xiao-Qing; Sun, Zhao-Xin; Li, Xiao-Nuo; Li, Jin-Xiang; Yang, Jian-Xin

2015-03-01

Tailpipe emission of internal combustion engine vehicle (ICEV) is one of the main sources leading to atmospheric environmental problems such as haze. Substituting electric vehicles for conventional gasoline vehicles is an important solution for reducing urban air pollution. In 2011, as a pilot city of electric vehicle, Beijing launched a promotion plan of electric vehicle. In order to compare the environmental impacts between Midi electric vehicle (Midi EV) and Hyundai gasoline taxi (ICEV), this study created an inventory with local data and well-reasoned assumptions, and contributed a life cycle assessment (LCA) model with GaBi4.4 software and comparative life cycle environmental assessment by Life cycle impact analysis models of CML2001(Problem oriented) and EI99 (Damage oriented), which included the environmental impacts of full life cycle, manufacture phase, use phase and end of life. The sensitivity analysis of lifetime mileage and power structure was also provided. The results indicated that the full life cycle environmental impact of Midi EV was smaller than Hyundai ICEV, which was mainly due to the lower fossil fuel consumption. On the contrary, Midi EV exhibited the potential of increasing the environmental impacts of ecosystem quality influence and Human health influence. By CML2001 model, the results indicated that Midi EV might decrease the impact of Abiotic Depletion Potential, Global Warming Potential, Ozone Layer Depletion Potential and so on. However, in the production phase, the impact of Abiotic Depletion Potential, Acidification Potential, Eutrophication Potential, Global Warming Potential, Photochemical Ozone Creation Potential, Ozone Layer Depletion Potential, Marine Aquatic Ecotoxicity Potential, Terrestric Ecotoxicity Potential, Human Toxicity Potential of Midi EV were increased relative to Hyundai ICEV because of emissions impacts from its power system especially the battery production. Besides, in the use phase, electricity production was the main process leading to the impact of Abiotic Depletion Potential, Acidification Potential, Eutrophication Potential, Global Warming Potential, Photochemical Ozone Creation Potential, Marine Aquatic Ecotoxicity Potential, Freshwater Aquatic Ecotoxicity Potential, Human Toxicity Potential. While for Hyundai ICEV, gasoline production and tailpipe emission were the primary sources of environmental impact in the use phase. Tailpipe emission was a significant cause for increase in Eutrophication Potential and Global Warming Potential, and so forth. On the basis of inventory data analysis and 2010 Beijing electricity mix, the comparative results of haze-induced pollutants emissions showed that the full life cycle emissions of PM2.5, NO(x), SO(x), VOCs of Midi EV were higher than those of Hyundai ICEV, but the emission of NH3 was lower than that of Hyundai ICEV. Different emissions in use phase were the chief reason leading to this trend. In addition, by sensitivity analysis the results indicated that with the increase of lifetime mileage and proportion of cleaning energy, the rate of GHG( Green House Gas) emission reduction per kilometer of Midi EV became higher with respect to Hyundai ICEV. Haze-induced pollutants emission from EV could be significantly reduced using cleaner power energy. According to the assessment results, some management strategies aiming at electric car promotion were proposed.

Environmental impact analysis; the example of the proposed Trans-Alaska Pipeline

USGS Publications Warehouse

Brew, David A.

1974-01-01

The environmental impact analysis made as required by the National Environmental Policy Act of 1969 for the proposed trans-Alaska pipeline included consideration of the (1) technologically complex and geographically extensive proposed project, (2) extremely different physical environments across Alaska along the proposed route and elsewhere in Alaska and in Canada along alternative routes, (3) socioeconomic environment of the State of Alaska, and (4) a wide variety of alternatives. The analysis was designed specifically to fit the project and environment that would be affected. The environment was divided into two general parts--natural physical systems and superposed socioeconomic systems--and those parts were further divided into discipline-oriented systems or components that were studied and analyzed by scientists of the appropriate discipline. Particular attention was given to potential feedback loops in the impact network and to linkages between the project's impacting effects and the environment. The results of the analysis as reported in the final environmental impact statement were that both unavoidable and threatened environmental impacts would result from construction, operation, and maintenance of the proposed pipeline system and the developments related to it. The principal unavoidable effects would be (1) disturbances of terrain, fish and wildlife habitat, and human environs, (2) the results of the discharge of effluent from the tanker-ballast-treatment facility into Port Valdez and of some indeterminate amount of oil released into the ocean from tank-cleaning operations at sea, and (3) the results associated with increased human pressures of all kinds on the environment. Other unavoidable effects would be those related to increase of State and Native Corporation revenues, accelerated cultural change of the Native population, and extraction of the oil and gas resource. The main threatened environmental effects would all be related to unintentional oil loss from the pipeline, from tankers, or in the oil field. Oil losses from the pipeline could be caused by direct or indirect effects of earthquakes, destructive sea waves, slope failure caused by natural or artificial processes, thaw-plug instability (in permafrost), differential settlement of permafrost terrain, and bed scour and bank erosion at stream crossings. Oil loss from tankers could be caused by accidents during transfer operations at Valdez and at destination ports and by casualties involving tankers and other ships. Comparison of alternative routes and transportation systems and of their environmental impacts provided information which indicates to the author that one corridor containing both oil and gas pipelines would have less environmental impact than would separate corridors. Considering also the threat to the marine environment that any tanker system would impose and the threat that zones of high earthquake frequency and magnitude would impose on pipelines, it is apparent to the author that environmental impact and cost would be least for a single-corridor on-land route that avoided earthquake zones. The alternative trans-Alaska-Canada routes would meet these criteria. The decisions of the U.S. Department of the Interior, the U.S. Congress, and the President of the United States in favor of the proposed trans-Alaska pipeline system indicate the relative weight given by the decision makers in balancing the importance of potential environmental consequences against the advantages to be derived from rapid resource development.

Analysis of the Lifecycle Impacts and Potential for Avoided Impacts Associated with Single Family Homes

EPA Pesticide Factsheets

Learn how recovering construction and demolition materials from single-family homes and reusing them in building and road construction and other applications helps offset the environmental impacts associated with single-family homes.

Application of Climate Impact Metrics to Rotorcraft Design

NASA Technical Reports Server (NTRS)

Russell, Carl; Johnson, Wayne

2013-01-01

Multiple metrics are applied to the design of large civil rotorcraft, integrating minimum cost and minimum environmental impact. The design mission is passenger transport with similar range and capacity to a regional jet. Separate aircraft designs are generated for minimum empty weight, fuel burn, and environmental impact. A metric specifically developed for the design of aircraft is employed to evaluate emissions. The designs are generated using the NDARC rotorcraft sizing code, and rotor analysis is performed with the CAMRAD II aeromechanics code. Design and mission parameters such as wing loading, disk loading, and cruise altitude are varied to minimize both cost and environmental impact metrics. This paper presents the results of these parametric sweeps as well as the final aircraft designs.

Application of Climate Impact Metrics to Civil Tiltrotor Design

NASA Technical Reports Server (NTRS)

Russell, Carl R.; Johnson, Wayne

2013-01-01

Multiple metrics are applied to the design of a large civil tiltrotor, integrating minimum cost and minimum environmental impact. The design mission is passenger transport with similar range and capacity to a regional jet. Separate aircraft designs are generated for minimum empty weight, fuel burn, and environmental impact. A metric specifically developed for the design of aircraft is employed to evaluate emissions. The designs are generated using the NDARC rotorcraft sizing code, and rotor analysis is performed with the CAMRAD II aeromechanics code. Design and mission parameters such as wing loading, disk loading, and cruise altitude are varied to minimize both cost and environmental impact metrics. This paper presents the results of these parametric sweeps as well as the final aircraft designs.

Environmental and economic assessment methods for waste management decision-support: possibilities and limitations.

PubMed

Finnveden, Göran; Björklund, Anna; Moberg, Asa; Ekvall, Tomas

2007-06-01

A large number of methods and approaches that can be used for supporting waste management decisions at different levels in society have been developed. In this paper an overview of methods is provided and preliminary guidelines for the choice of methods are presented. The methods introduced include: Environmental Impact Assessment, Strategic Environmental Assessment, Life Cycle Assessment, Cost-Benefit Analysis, Cost-effectiveness Analysis, Life-cycle Costing, Risk Assessment, Material Flow Accounting, Substance Flow Analysis, Energy Analysis, Exergy Analysis, Entropy Analysis, Environmental Management Systems, and Environmental Auditing. The characteristics used are the types of impacts included, the objects under study and whether the method is procedural or analytical. The different methods can be described as systems analysis methods. Waste management systems thinking is receiving increasing attention. This is, for example, evidenced by the suggested thematic strategy on waste by the European Commission where life-cycle analysis and life-cycle thinking get prominent positions. Indeed, life-cycle analyses have been shown to provide policy-relevant and consistent results. However, it is also clear that the studies will always be open to criticism since they are simplifications of reality and include uncertainties. This is something all systems analysis methods have in common. Assumptions can be challenged and it may be difficult to generalize from case studies to policies. This suggests that if decisions are going to be made, they are likely to be made on a less than perfect basis.

32 CFR 651.46 - Existing EISs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Existing EISs. 651.46 Section 651.46 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.46 Existing EISs. A newly...

Environmental impacts in the life cycle of olive oil: a literature review.

PubMed

Banias, Georgios; Achillas, Charisios; Vlachokostas, Christos; Moussiopoulos, Nicolas; Stefanou, Maria

2017-04-01

The production of olive oil is considered to be one of the largest agricultural business sectors in the Mediterranean area. Apart from its significant impact on the economies of countries in Southern Europe, Northern Africa and Middle East, olive oil production also involves considerable social and environmental considerations. However, despite such importance, the environmental effects of olive oil production have not been studied as much other agricultural productions and farming systems, which are more characteristic of central and northern Europe. We present a thorough and systematic literature review of scientific publications with respect to the use of environmental tools in the life cycle of olive oil. The analysis takes into consideration the farming of olive trees, the manufacture of olive oil, packaging, transportation and reverse logistics. To that end, journal publications up to 2015 in this specific field are recorded and, at the same time, the most important environmental impacts are revealed and a gap analysis is carried out. The analysis conducted reveals that farming of olive trees (with pesticide use and waste/by-product production being the 'hottest' topics) and the manufacturing of olive oil (concentrating mostly on waste/by-product production and management) are the phases with the highest environmental focus from the scientific community. Moreover, gaps in the literature are detected mostly with respect to fuel consumption and the use and promotion of renewable energy sources in olive oil production. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Methods for land use impact assessment: A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perminova, Tataina, E-mail: tatiana.perminova@utt.fr; Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk; Sirina, Natalia, E-mail: natalia.sirina@utt.fr

Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison ofmore » the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment. - Highlights: • We identified the most frequently used methods in land use impact assessment. • A comparison of the methods based on several criteria was carried out. • Agricultural land use is by far the most common area of study within the methods. • Incentive driven methods, like LCA, arouse the most interest in this field.« less

Environmental Development Plan (EDP). Enhanced gas recovery, FY 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-03-01

This Enhanced Gcs Recovery EDP addresses the environmental impacts of enhanced gas recovery processes in shale and sandstone, methane drainage from coalbeds, and methane recovery from geopressured aquifers. The EDP addresses planning in two basic areas: environmental research and environmental assessment. Environmental research can be categorized as follows: characterization of pollutants from EGR processes; selective application of monitoring and measuring techniques; evaluation of control/mitigation techniques; and evaluation of the synergistic impacts of the development of EGR techniques. Environmental assessment activities scheduled by EDP include: assessment of ecological impacts; assessment of socioeconomic effects; EIA/EIS preparation; evaluation of control technology needs; andmore » analysis of applicable and proposed emission, effluent, and health and safety standards. The EGR EDP includes an EGR technology overview (Section 2), a discussion of EGR environmental issues and requirements (Section 3), an environmental action plan (Section 4), an environmental management strategy for the EGR program (Section 5), and supporting appendices which present information on Federal legislation applicable to EGR technology, a summary of ongoing and completed research, and future research and assessment projects.« less

A Screening Method for Assessing Cumulative Impacts

PubMed Central

Alexeeff, George V.; Faust, John B.; August, Laura Meehan; Milanes, Carmen; Randles, Karen; Zeise, Lauren; Denton, Joan

2012-01-01

The California Environmental Protection Agency (Cal/EPA) Environmental Justice Action Plan calls for guidelines for evaluating “cumulative impacts.” As a first step toward such guidelines, a screening methodology for assessing cumulative impacts in communities was developed. The method, presented here, is based on the working definition of cumulative impacts adopted by Cal/EPA [1]: “Cumulative impacts means exposures, public health or environmental effects from the combined emissions and discharges in a geographic area, including environmental pollution from all sources, whether single or multi-media, routinely, accidentally, or otherwise released. Impacts will take into account sensitive populations and socio-economic factors, where applicable and to the extent data are available.” The screening methodology is built on this definition as well as current scientific understanding of environmental pollution and its adverse impacts on health, including the influence of both intrinsic, biological factors and non-intrinsic socioeconomic factors in mediating the effects of pollutant exposures. It addresses disparities in the distribution of pollution and health outcomes. The methodology provides a science-based tool to screen places for relative cumulative impacts, incorporating both the pollution burden on a community- including exposures to pollutants, their public health and environmental effects- and community characteristics, specifically sensitivity and socioeconomic factors. The screening methodology provides relative rankings to distinguish more highly impacted communities from less impacted ones. It may also help identify which factors are the greatest contributors to a community’s cumulative impact. It is not designed to provide quantitative estimates of community-level health impacts. A pilot screening analysis is presented here to illustrate the application of this methodology. Once guidelines are adopted, the methodology can serve as a screening tool to help Cal/EPA programs prioritize their activities and target those communities with the greatest cumulative impacts. PMID:22470315

Life cycle assessment of overhead and underground primary power distribution.

PubMed

Bumby, Sarah; Druzhinina, Ekaterina; Feraldi, Rebe; Werthmann, Danae; Geyer, Roland; Sahl, Jack

2010-07-15

Electrical power can be distributed in overhead or underground systems, both of which generate a variety of environmental impacts at all stages of their life cycles. While there is considerable literature discussing the trade-offs between both systems in terms of aesthetics, safety, cost, and reliability, environmental assessments are relatively rare and limited to power cable production and end-of-life management. This paper assesses environmental impacts from overhead and underground medium voltage power distribution systems as they are currently built and managed by Southern California Edison (SCE). It uses process-based life cycle assessment (LCA) according to ISO 14044 (2006) and SCE-specific primary data to the extent possible. Potential environmental impacts have been calculated using a wide range of midpoint indicators, and robustness of the results has been investigated through sensitivity analysis of the most uncertain and potentially significant parameters. The studied underground system has higher environmental impacts in all indicators and for all parameter values, mostly due to its higher material intensity. For both systems and all indicators the majority of impact occurs during cable production. Promising strategies for impact reduction are thus cable failure rate reduction for overhead and cable lifetime extension for underground systems.

How Many Environmental Impact Indicators Are Needed in the Evaluation of Product Life Cycles?

PubMed

Steinmann, Zoran J N; Schipper, Aafke M; Hauck, Mara; Huijbregts, Mark A J

2016-04-05

Numerous indicators are currently available for environmental impact assessments, especially in the field of Life Cycle Impact Assessment (LCIA). Because decision-making on the basis of hundreds of indicators simultaneously is unfeasible, a nonredundant key set of indicators representative of the overall environmental impact is needed. We aimed to find such a nonredundant set of indicators based on their mutual correlations. We have used Principal Component Analysis (PCA) in combination with an optimization algorithm to find an optimal set of indicators out of 135 impact indicators calculated for 976 products from the ecoinvent database. The first four principal components covered 92% of the variance in product rankings, showing the potential for indicator reduction. The same amount of variance (92%) could be covered by a minimal set of six indicators, related to climate change, ozone depletion, the combined effects of acidification and eutrophication, terrestrial ecotoxicity, marine ecotoxicity, and land use. In comparison, four commonly used resource footprints (energy, water, land, materials) together accounted for 84% of the variance in product rankings. We conclude that the plethora of environmental indicators can be reduced to a small key set, representing the major part of the variation in environmental impacts between product life cycles.

Viability analysis in biological evaluations: Concepts of population viability analysis, biological population, and ecological scale

Treesearch

Gregory D. Hayward; John R. Squires

1994-01-01

Environmental protection strategies often rely on environmental impact assessments. As part of the assessment process biologists are routinely asked to evaluate the effects of management actions on plants and animals. This evaluation often requires that biologists make judgments about the viability of affected populations. However, population viability...

Klickitat Cogeneration Project : Final Environmental Assessment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

United States. Bonneville Power Administration; Klickitat Energy Partners

1994-09-01

To meet BPA`s contractual obligation to supply electrical power to its customers, BPA proposes to acquire power generated by Klickitat Cogeneration Project. BPA has prepared an environmental assessment evaluating the proposed project. Based on the EA analysis, BPA`s proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 for the following reasons: (1)it will not have a significant impact land use, upland vegetation, wetlands, water quality, geology, soils, public health and safety, visual quality, historical and cultural resources, recreation and socioeconomics, and (2)more » impacts to fisheries, wildlife resources, air quality, and noise will be temporary, minor, or sufficiently offset by mitigation. Therefore, the preparation of an environmental impact statement is not required and BPA is issuing this FONSI (Finding of No Significant Impact).« less

Environmental impacts of milk powder and butter manufactured in the Republic of Ireland.

PubMed

Finnegan, William; Goggins, Jamie; Clifford, Eoghan; Zhan, Xinmin

2017-02-01

The abolition of the milk quota system that was in place in Europe was abolished in 2015, which instigated an immediate increase in milk production in many European countries. This increase will aid in addressing the world's ever growing demand for food, but will incur increased stresses on the environmental impact and sustainability of the dairy industry. In this study, an environmental life cycle assessment was performed in order to estimate the environmental impacts associated with the manufacture of milk powder and butter in the Republic of Ireland. A farm gate to processing factory gate analysis, which includes raw milk transportation, processing into each product and packaging, is assessed in this study. Operational data was obtained from 5 dairy processing factories that produce milk powder (4 of which also produce butter). Results for each environmental impact category are presented per kilogram of product. Energy consumption (raw milk transportation and on-site electrical and thermal energy usage) contributes, on average, 89% and 78% of the total global warming potential, for milk powder and butter respectively, for the life cycle stages assessed. Similarly, energy consumption contributes, on average, 86% and 96% of the total terrestrial acidification potential for milk powder and butter respectively, for these life cycle stages. Emissions associated with wastewater treatment contribute approximately 10% and 40% to the total freshwater eutrophication potential and marine eutrophication potential, respectively, for both milk powder and butter production. In addition, packaging materials also has a significant contribution to these environmental impact categories for butter production. Results were also presented for three milk powder products being manufactured by the factories surveyed: skim milk powder, whole milk powder and full fat milk powder. The analysis presented in this paper helps to identify opportunities to reduce the environmental impacts associated with post-farm processing of milk powder and butter. Copyright © 2016 Elsevier B.V. All rights reserved.

Ecological footprint analysis of environmental impacts by cascaded exploitation of diversion-type small hydropower: a case study in southwest china

NASA Astrophysics Data System (ADS)

Wang, Zhenhua; Li, Qingyun; Huang, Zhuo; Tang, Xianqiang; Zhao, Weihua

2017-05-01

Cascaded exploitation of diversion-type small hydropower (SHP) offers a source of new energy as well as socioeconomic benefits; however, it inevitably causes environmental disturbance and damage. Previous studies on the cumulative effect of cascaded diversion SHP rarely discussed using quantitative analysis method. In this paper, the ecological footprint analysis approach is proposed to assess the positive and negative impacts of cascaded diversion SHP on environment of a small-scale river in Southwest China. Positive impact is defined as ecological supply footprint (ESF), which refers to vegetation protection by replacing firewood with SHP. Negative impact is defined as ecological loss footprint (ELF), which includes fish and net primary productivity loss, vegetation destruction and soil erosion. With the raising in the number (n>4) of diversion SHP stations, the difference between ELF and ESF increases remarkably, suggesting that the adverse impacts of cascaded diversion SHP accumulate in the study area. Compared with vegetation destruction and soil erosion, the cumulative loss of fish and net productivity is the most important aspect of the adverse impacts which needs more attentions.

Environmental Impact Analysis Process. Final Environmental Impact Statement. Part 2. Proposed High Frequency Active Auroral Research Program.

DTIC Science & Technology

1993-07-01

there are any. The recent set of articles in gcience (1) on the effects of Electromagnetic Fields (EDF) states quite clearly and accurately that we...gone into the explanation of how the HAARP will impact the areas most closely related to the study subject, associated electromagnetic fields and...during break-up each year. page 4-90. Exposure to Humans . This first paragraph is terrible. Concerned citizens will be looking here first to learn if

Understanding the Influence of Environment on Adults' Walking Experiences: A Meta-Synthesis Study.

PubMed

Dadpour, Sara; Pakzad, Jahanshah; Khankeh, Hamidreza

2016-07-20

The environment has an important impact on physical activity, especially walking. The relationship between the environment and walking is not the same as for other types of physical activity. This study seeks to comprehensively identify the environmental factors influencing walking and to show how those environmental factors impact on walking using the experiences of adults between the ages of 18 and 65. The current study is a meta-synthesis based on a systematic review. Seven databases of related disciplines were searched, including health, transportation, physical activity, architecture, and interdisciplinary databases. In addition to the databases, two journals were searched. Of the 11,777 papers identified, 10 met the eligibility criteria and quality for selection. Qualitative content analysis was used for analysis of the results. The four themes identified as influencing walking were "safety and security", "environmental aesthetics", "social relations", and "convenience and efficiency". "Convenience and efficiency" and "environmental aesthetics" could enhance the impact of "social relations" on walking in some aspects. In addition, "environmental aesthetics" and "social relations" could hinder the influence of "convenience and efficiency" on walking in some aspects. Given the results of the study, strategies are proposed to enhance the walking experience.

Impact of environmental variables on Dubas bug infestation rate: A case study from the Sultanate of Oman

PubMed Central

Al-Kindi, Khalifa M.; Andrew, Nigel; Welch, Mitchell

2017-01-01

Date palm cultivation is economically important in the Sultanate of Oman, with significant financial investment coming from both the government and from private individuals. However, a global infestation of Dubas bug (Ommatissus lybicus Bergevin) has impacted the Middle East region, and infestations of date palms have been widespread. In this study, spatial analysis and geostatistical techniques were used to model the spatial distribution of Dubas bug infestations to (a) identify correlations between Dubas bug densities and different environmental variables, and (b) predict the locations of future Dubas bug infestations in Oman. Firstly, we considered individual environmental variables and their correlations with infestation locations. Then, we applied more complex predictive models and regression analysis techniques to investigate the combinations of environmental factors most conducive to the survival and spread of the Dubas bug. Environmental variables including elevation, geology, and distance to drainage pathways were found to significantly affect Dubas bug infestations. In contrast, aspect and hillshade did not significantly impact on Dubas bug infestations. Understanding their distribution and therefore applying targeted controls on their spread is important for effective mapping, control and management (e.g., resource allocation) of Dubas bug infestations. PMID:28558069

Impact of environmental variables on Dubas bug infestation rate: A case study from the Sultanate of Oman.

PubMed

Al-Kindi, Khalifa M; Kwan, Paul; Andrew, Nigel; Welch, Mitchell

2017-01-01

Date palm cultivation is economically important in the Sultanate of Oman, with significant financial investment coming from both the government and from private individuals. However, a global infestation of Dubas bug (Ommatissus lybicus Bergevin) has impacted the Middle East region, and infestations of date palms have been widespread. In this study, spatial analysis and geostatistical techniques were used to model the spatial distribution of Dubas bug infestations to (a) identify correlations between Dubas bug densities and different environmental variables, and (b) predict the locations of future Dubas bug infestations in Oman. Firstly, we considered individual environmental variables and their correlations with infestation locations. Then, we applied more complex predictive models and regression analysis techniques to investigate the combinations of environmental factors most conducive to the survival and spread of the Dubas bug. Environmental variables including elevation, geology, and distance to drainage pathways were found to significantly affect Dubas bug infestations. In contrast, aspect and hillshade did not significantly impact on Dubas bug infestations. Understanding their distribution and therefore applying targeted controls on their spread is important for effective mapping, control and management (e.g., resource allocation) of Dubas bug infestations.

A comparative analysis of environmental impacts of non-fossil energy production methods

NASA Astrophysics Data System (ADS)

Kiss, Adam

2014-12-01

The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

Eco-Balance analysis of the disused lead-acid-batteries recycling technology

NASA Astrophysics Data System (ADS)

Kamińska, Ewa; Kamiński, Tomasz

2017-10-01

The article presents the results of the eco-balance analysis of the disused lead-acid batteries recycling process. Test-dedicated technology offers the possibility to recover other elements, for example, polypropylene of the battery case or to obtain crystalline sodium sulphate. The life cycle assessment was made using ReCiPe and IMPACT2002 + methods. The results are shown as environmental points [Pt]. The results are shown in the environmental categories, specific for each of the methods grouped in the impact categories. 1 Mg of the processed srap was a dopted as the functional unit. The results of the analyses indicate that recycling processes may provide the environmental impact of recycling technology less harmful. Repeated use of lead causes that its original sources are not explored. Similarly, the use of granule production-dedicated polypropylene extracted from battery casings that are used in the plastics industry, has environmental benefits. Due to the widespread use of lead-acid batteries, the attention should be paid to their proper utilization, especially in terms of heavy metals, especially lead. According to the calculations, the highest level of environmental benefits from the use of lead from secondary sources in the production of new products, was observed in the refining process.

Resource footprints and their ecosystem consequences

PubMed Central

Verones, Francesca; Moran, Daniel; Stadler, Konstantin; Kanemoto, Keiichiro; Wood, Richard

2017-01-01

A meaningful environmental impact analysis should go beyond the accounting of pressures from resource use and actually assess how resource demand affects ecosystems. The various currently available footprints of nations report the environmental pressures e.g. water use or pollutant emissions, driven by consumption. However, there have been limited attempts to assess the environmental consequences of these pressures. Ultimately, consequences, not pressures, should guide environmental policymaking. The newly released LC-Impact method demonstrates progress on the path to providing this missing link. Here we present “ecosystem impact footprints” in terms of the consequences for biodiversity and assess the differences in impact footprint results from MRIO-based pressure footprints. The new perspective reveals major changes in the relative contribution of nations to global footprints. Wealthy countries have high pressure footprints in lower-income countries but their impact footprints often have their origin in higher-income countries. This shift in perspective provides a different insight on where to focus policy responses to preserve biodiversity. PMID:28112168

Environmental impacts of modern agricultural technology diffusion in Bangladesh: an analysis of farmers' perceptions and their determinants.

PubMed

Rahman, Sanzidur

2003-06-01

Farmers' perception of the environmental impacts of modern agricultural technology diffusion and factors determining such awareness were examined using survey data from 21 villages in three agro-ecological regions of Bangladesh. Results reveal that farmers are well aware of the adverse environmental impacts of modern agricultural technology, although their awareness remains confined within visible impacts such as soil fertility, fish catches, and health effects. Their perception of intangible impacts such as, toxicity in water and soils is weak. Level and duration of modern agricultural technology adoption directly influence awareness of its adverse effects. Education and extension contacts also play an important role in raising awareness. Awareness is higher among farmers in developed regions, fertile locations and those with access to off-farm income sources. Promotion of education and strengthening extension services will boost farmers' environmental awareness. Infrastructure development and measures to replenish depleting soil fertility will also play a positive role in raising awareness.

Insulation Cork Boards-Environmental Life Cycle Assessment of an Organic Construction Material.

PubMed

Silvestre, José D; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D; Durão, Vera

2016-05-20

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A "cradle-to-cradle" environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows ( i.e. , uptakes and emissions), including sensitivity analysis of this procedure; at the production stage-the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation-the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date "cradle-to-cradle" environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards.

Insulation Cork Boards—Environmental Life Cycle Assessment of an Organic Construction Material

PubMed Central

Silvestre, José D.; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D.; Durão, Vera

2016-01-01

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A “cradle-to-cradle” environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows (i.e., uptakes and emissions), including sensitivity analysis of this procedure; at the production stage—the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation—the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date “cradle-to-cradle” environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards. PMID:28773516

Plan EJ 2014: Science Tools Development

EPA Pesticide Factsheets

Under Plan EJ 2014, EPA has committed to building a strong scientific foundation for supporting environmental justice and conducting disproportionate impact analysis, particularly methods to appropriately characterize and assess cumulative impacts.

Implementing the Provisions of the National Environmental Policy Act

NASA Technical Reports Server (NTRS)

1988-01-01

This handbook provides guidance and assistance to NASA officials in carrying out their responsibilities under the National Environmental Policy Act and the applicable NASA procedures (14 CFR 1216.3, Attachment A to NMI 8800.7). The handbook, as was contemplated by the regulations of the Council on Environmental Quality, stresses the need for environmental analysis from the time of early planning through environmental assessment and environmental impact statement preparation to implementation of the subject action, and provides for necessary follow up. It stresses the need for NASA officials to draw upon all the appropriate disciplines from the natural and social sciences plus the environmental design arts in planning and decision making on actions which may have an impact on the human environment. The handbook is applicable to NASA Headquarters and field installations.

Life Cycle Assessment Software for Product and Process Sustainability Analysis

ERIC Educational Resources Information Center

Vervaeke, Marina

2012-01-01

In recent years, life cycle assessment (LCA), a methodology for assessment of environmental impacts of products and services, has become increasingly important. This methodology is applied by decision makers in industry and policy, product developers, environmental managers, and other non-LCA specialists working on environmental issues in a wide…

7 CFR Exhibit H to Subpart G of... - Environmental Assessment for Class II Actions

Code of Federal Regulations, 2014 CFR

2014-01-01

... questions and contain as attachments the indicated descriptive materials, as well as the environmental... descriptive purposes or environmental analysis, include land use maps or other graphic information. All... meteorological conditions hinder or affect the dispersal of air emissions. Evaluate the impact on air quality...

7 CFR Exhibit H to Subpart G of... - Environmental Assessment for Class II Actions

Code of Federal Regulations, 2013 CFR

2013-01-01

... questions and contain as attachments the indicated descriptive materials, as well as the environmental... descriptive purposes or environmental analysis, include land use maps or other graphic information. All... meteorological conditions hinder or affect the dispersal of air emissions. Evaluate the impact on air quality...

7 CFR Exhibit H to Subpart G of... - Environmental Assessment for Class II Actions

Code of Federal Regulations, 2012 CFR

2012-01-01

... questions and contain as attachments the indicated descriptive materials, as well as the environmental... descriptive purposes or environmental analysis, include land use maps or other graphic information. All... meteorological conditions hinder or affect the dispersal of air emissions. Evaluate the impact on air quality...

7 CFR Exhibit H to Subpart G of... - Environmental Assessment for Class II Actions

Code of Federal Regulations, 2010 CFR

2010-01-01

... questions and contain as attachments the indicated descriptive materials, as well as the environmental... descriptive purposes or environmental analysis, include land use maps or other graphic information. All... meteorological conditions hinder or affect the dispersal of air emissions. Evaluate the impact on air quality...

7 CFR Exhibit H to Subpart G of... - Environmental Assessment for Class II Actions

Code of Federal Regulations, 2011 CFR

2011-01-01

... questions and contain as attachments the indicated descriptive materials, as well as the environmental... descriptive purposes or environmental analysis, include land use maps or other graphic information. All... meteorological conditions hinder or affect the dispersal of air emissions. Evaluate the impact on air quality...

15 CFR 971.204 - Environmental and use conflict analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS... Administrator to prepare an environmental impact statement (EIS) on the proposed mining activities, and to... Administrator may require the submission of additional data, in the event he determines that the basis for a...

Multicriteria analysis to evaluate wave energy converters based on their environmental impact: an Italian case study

NASA Astrophysics Data System (ADS)

Azzellino, Arianna; Contestabile, Pasquale; Lanfredi, Caterina; Vicinanza, Diego

2010-05-01

The exploitation of renewable energy resources is fast becoming a key objective in many countries. Countries with coastlines have particularly valuable renewable energy resources in the form of tides, currents, waves and offshore wind. Due to the visual impact of siting large numbers of energy generating devices (eg. wind turbines) in terrestrial landscapes, considerable attention is now being directed towards coastal waters. Due to their environmental sensitivity, the selection of the most adequate location for these systems is a critical factor. Multi-criteria analysis allows to consider a wide variety of key characteristics (e.g. water depth, distance to shore, distance to the electric grid in land, geology, environmental impact) that may be converted into a numerical index of suitability for different WEC devices to different locations. So identifying the best alternative between an offshore or a onshore device may be specifically treated as a multicriteria problem. Special enphasisi should be given in the multicriteria analysis to the environmental impact issues. The wave energy prospective in the Italian seas is relatively low if compared to the other European countries faced to the ocean. Based on the wave climate, the Alghero site, (NW Sardinia, Italy) is one of the most interesting sites for the wave energy perspective (about 10 kW/m). Alghero site is characterized by a high level of marine biodiversity. In 2002 the area northern to Alghero harbour (Capo Caccia-Isola Piana) was established a Marine Protected Area (MPA). It could be discussed for this site how to choose between the onshore/offshore WEC alternative. An offshore device like Wave Dragon (http://www.wavedragon.net/) installed at -65m depth (width=300m and length=170 m) may approximately produce about 3.6 GWh/y with a total cost of about 9,000,000 €. On the other hand, an onshore device like SSG (http://waveenergy.no/), employed as crown wall for a vertical breakwater to enlarge the present harbour protection, and installed at -10m depth (length=300 m) may produce about 2.7 GWh/y with a total costs of about 12,000,000 €, where only the 50% of the amount are the costs of the SSG device. Obviously the environmental impact of the two solutions is quite different. Aim of this study is to provide a multicriteria decision support framework to evaluate the best WEC typology and location in the perspective of the environmental cost-benefit analysis. The general environmental aspects generated by wave power projects will be described. Colonisation patterns and biofouling will be discussed with particular reference to changes of the seabed and alterations due to new substrates. In addition, impacts for fish, fishery and marine mammals will be also considered. We suggest that wave power projects should be evaluated also on the basis of their environmental impacts in the perspective of the Strategic Environmental Assessment (SEA) analysis, as implemented by the European Commission (SEA Directive 2001/42/EC). The early incorporation of the environmental aspects involved in the evaluation of wave power projects will give the opportunity for early mitigations or design modifications, most likely making wave projects more acceptable in the long run and more suitable for the marine environment.

Environmental analysis of the operation of Oak Ridge National Laboratory (X-10 site)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyle, J.W.; Blumberg, R.; Cotter, S.J.

1982-11-01

An environmental analysis of the operation of the Oak Ridge National Laboratory (ORNL) facilities in Bethel Valley and Melton Valley was conducted to present to the public information concerning the extent to which recognizable effects, or potential effects, on the environment may occur. The analysis addresses current operations of the ORNL X-10 site and completed operations that may continue to have residual effects. Solid wastes from ORNL operations at the Y-12 site which are transported to the X-10 site for burial (e.g., Biology Division animal wastes) are included as part of X-10 site operation. Socioeconomic effects are associated primarily withmore » the communities where employees live and with the Knoxville Bureau of Economic Analysis economic area as a whole. Therefore, ORNL employees at both Y-12 and X-10 sites are included in the ORNL socioeconomic impact analysis. An extensive base of environmental data was accumulated for this report. Over 80 reports related to ORNL facilities and/or operations are cited as well as many open-literature citations. Environmental effects of the operation of ORNL result from operational discharges from the onsite facilities; construction and/or modification of facilities, transportation to and from the site of persons, goods and services; socioeconomic impacts to the local, regional, and general population; and accidental discharges if they should occur. Operational discharges to the environnment are constrained by federal, state, and local regulations and by criteria established by the US Department of Energy to minimize adverse impacts. It is the purpose of this document to evaluate the operation of the ORNL insofar as impacts beyond the site boundary may occur or have the potential for occurrence.« less

The Interacting Axes of Environmental, Health, and Social Justice Cumulative Impacts: A Case Study of the Blueberry River First Nations

PubMed Central

Gislason, Maya K; Andersen, Holly K

2016-01-01

We consider the case of intensive resource extractive projects in the Blueberry River First Nations in Northern British Columbia, Canada, as a case study. Drawing on the parallels between concepts of cumulative environmental and cumulative health impacts, we highlight three axes along which to gauge the effects of intensive extraction projects. These are environmental, health, and social justice axes. Using an intersectional analysis highlights the way in which using individual indicators to measure impact, rather than considering cumulative effects, hides the full extent by which the affected First Nations communities are impacted by intensive extraction projects. We use the case study to contemplate several mechanisms at the intersection of these axes whereby the negative effects of each not only add but also amplify through their interactions. For example, direct impact along the environmental axis indirectly amplifies other health and social justice impacts separately from the direct impacts on those axes. We conclude there is significant work still to be done to use cumulative indicators to study the impacts of extractive industry projects—like liquefied natural gas—on peoples, environments, and health. PMID:27763548

Visual Analysis as a design and decision-making tool in the development of a quarry

Treesearch

Randall Boyd Fitzgerald

1979-01-01

In order to obtain local and state government approvals, an environmental impact analysis of the mining and reclamation of a proposed hard rock quarry was required. High visibility of the proposed mining area from the adjacent community required a visual impact analysis in the planning and design of the project. The Visual Analysis defined design criteria for the...

Environmental Impact Analysis Process. Environmental Impact Statement for Realignment of Beale Air Force Base

DTIC Science & Technology

1990-04-01

CONTACTED .......... 6-2 APPENDIX A.- Average Daily Air Emissions Inventory for Yuba County .............................. A-1 APPENDIX B...Civilian Wage and Salary Employment, Yuba City Metropolitan Statistical Area, 1987 (Yuba and Sutter Counties , CA) ................... 3-46 vii LIST OF...Beale AFB Students Enrolled in Yuba and Sutter County Public Schools, FY 1989-90, by Assistance Category and School Capacity ................... 3-50 4

Regional impacts of environmental regulations and technical change in the US forestry sector: a multiregional CGE analysis

Treesearch

Gouranga G. Das; Janki R.R. Alavalapati; Douglas R. Carter; Marions E. Tsigas

2005-01-01

In this paper, a multiregional computable general equilibrium model, which divides the United States (US) into four broad geographical regions and aggregates other nations into the rest of the world, is used to analyze the effects associated with environmental and technological policy shifts in the US forest sector. In particular, we analyze the impacts of: (i) a 20%...

Environmental Impacts from Photovoltaic Solar Cells Made with Single Walled Carbon Nanotubes.

PubMed

Celik, Ilke; Mason, Brooke E; Phillips, Adam B; Heben, Michael J; Apul, Defne

2017-04-18

An ex-ante life cycle inventory was developed for single walled carbon nanotube (SWCNT) PV cells, including a laboratory-made 1% efficient device and an aspirational 28% efficient four-cell tandem device. The environmental impact of unit energy generation from the mono-Si PV technology was used as a reference point. Compared to monocrystalline Si (mono-Si), the environmental impacts from 1% SWCNT was ∼18 times higher due mainly to the short lifetime of three years. However, even with the same short lifetime, the 28% cell had lower environmental impacts than mono-Si. The effects of lifetime and efficiency on the environmental impacts were further examined. This analysis showed that if the SWCNT device efficiency had the same value as the best efficiency of the material under comparison, to match the total normalized impacts of the mono- and poly-Si, CIGS, CdTe, and a-Si devices, the SWCNT devices would need a lifetime of 2.8, 3.5, 5.3, 5.1, and 10.8 years, respectively. It was also found that if the SWCNT PV has an efficiency of 4.5% or higher, its energy payback time would be lower than other existing and emerging PV technologies. The major impacts of SWCNT PV came from the cell's materials synthesis.

Environmental impacts the of production and use of biodiesel.

PubMed

Živković, Snežana; Veljković, Milan

2018-01-01

Biodiesel as renewable, environmental friendly, less toxic, and biodegradable is an attractive alternative to fossil fuels and is produced mainly from vegetable oils and animal fats. It is expected, globally, that the use of renewable biofuels, in general, will increase rapidly in the near future. The growing biodiesel production and usage have encouraged assessment of its impact on the environment. The present paper reviews various aspects of biodiesel production using commercial processing technology and biodiesel use through evaluation and analysis of the studies concerning environmental impacts of biodiesel. As a general conclusion, it can be said that biodiesel has the potential to offer a series of perceived benefits such as political, economical, and agricultural, as well as environmental (due to its biodegradability, less toxicity, renewability) and health (greenhouse gas-saving, less harmful exhaust emissions).

Concentration of Elements in Food: How Can It Reflect Impact of Environmental and Other Influencing Factors?

NASA Astrophysics Data System (ADS)

Vincevica-Gaile, Zane; Klavins, Maris

2013-12-01

Element content of food is variable and can be influenced by different factors. The aim of the present study was to discover the linkage between macro- and microelement concentrations in food produced in Latvia, and possible impacts of environmental factors. More than 300 fresh food samples such as eggs, cottage cheese, honey, root vegetables, apple juice, apple wine were collected in the time period from 2009 to 2011. Samples were mineralised or analysed directly by appropriate method of quantitative analysis: atomic absorption spectrometry, inductively coupled plasma mass spectrometry or total reflection X-ray fluorescence spectrometry. Statistical analysis of data revealed that food elemental content can be influenced by sitespecific factors such as geographical origin, seasonality, environmental pollution.

Life Cycle Assessment of Bio-diesel Production—A Comparative Analysis

NASA Astrophysics Data System (ADS)

Chatterjee, R.; Sharma, V.; Mukherjee, S.; Kumar, S.

2014-04-01

This work deals with the comparative analysis of environmental impacts of bio-diesel produced from Jatropha curcas, Rapeseed and Palm oil by applying the life cycle assessment and eco-efficiency concepts. The environmental impact indicators considered in the present paper include global warming potential (GWP, CO2 equivalent), acidification potential (AP, SO2 equivalent) and eutrophication potential (EP, NO3 equivalent). Different weighting techniques have been used to present and evaluate the environmental characteristics of bio-diesel. With the assistance of normalization values, the eco-efficiency was demonstrated in this work. The results indicate that the energy consumption of bio-diesel production is lowest in Jatropha while AP and EP are more in case of Jatropha than that of Rapeseed and Palm oil.

Influence of Composition on the Environmental Impact of a Cast Aluminum Alloy

PubMed Central

Gómez, Patricia; Elduque, Daniel; Sarasa, Judith; Pina, Carmelo; Javierre, Carlos

2016-01-01

The influence of alloy composition on the environmental impact of the production of six aluminum casting alloys (Al Si12Cu1(Fe), Al Si5Mg, Al Si9Cu3Zn3Fe, Al Si10Mg(Fe), Al Si9Cu3(Fe)(Zn) and Al Si9) has been analyzed. In order to perform a more precise environmental impact calculation, Life Cycle Assessment (LCA) with ReCiPe Endpoint methodology has been used, with the EcoInvent v3 AlMg3 aluminum alloy dataset as a reference. This dataset has been updated with the material composition ranges of the mentioned alloys. The balanced, maximum and minimum environmental impact values have been obtained. In general, the overall impact of the studied aluminum alloys varies from 5.98 × 10−1 pts to 1.09 pts per kg, depending on the alloy composition. In the analysis of maximum and minimum environmental impact, the alloy that has the highest uncertainty is AlSi9Cu3(Fe)(Zn), with a range of ±9%. The elements that contribute the most to increase its impact are Copper and Tin. The environmental impact of a specific case, an LED luminaire housing made out of an Al Si12Cu1(Fe) cast alloy, has been studied, showing the importance of considering the composition. Significant differences with the standard datasets that are currently available in EcoInvent v3 have been found. PMID:28773536

Influence of Composition on the Environmental Impact of a Cast Aluminum Alloy.

PubMed

Gómez, Patricia; Elduque, Daniel; Sarasa, Judith; Pina, Carmelo; Javierre, Carlos

2016-05-25

The influence of alloy composition on the environmental impact of the production of six aluminum casting alloys (Al Si12Cu1(Fe), Al Si5Mg, Al Si9Cu3Zn3Fe, Al Si10Mg(Fe), Al Si9Cu3(Fe)(Zn) and Al Si9) has been analyzed. In order to perform a more precise environmental impact calculation, Life Cycle Assessment (LCA) with ReCiPe Endpoint methodology has been used, with the EcoInvent v3 AlMg3 aluminum alloy dataset as a reference. This dataset has been updated with the material composition ranges of the mentioned alloys. The balanced, maximum and minimum environmental impact values have been obtained. In general, the overall impact of the studied aluminum alloys varies from 5.98 × 10 -1 pts to 1.09 pts per kg, depending on the alloy composition. In the analysis of maximum and minimum environmental impact, the alloy that has the highest uncertainty is AlSi9Cu3(Fe)(Zn), with a range of ±9%. The elements that contribute the most to increase its impact are Copper and Tin. The environmental impact of a specific case, an LED luminaire housing made out of an Al Si12Cu1(Fe) cast alloy, has been studied, showing the importance of considering the composition. Significant differences with the standard datasets that are currently available in EcoInvent v3 have been found.

Life cycle assessment as a tool for the environmental improvement of the tannery industry in developing countries.

PubMed

Rivela, B; Moreira, M T; Bornhardt, C; Méndez, R; Feijoo, G

2004-03-15

A representative leather tannery industry in a Latin American developing country has been studied from an environmental point of view, including both technical and economic analysis. Life Cycle Analysis (LCA) methodology has been used for the quantification and evaluation of the impacts of the chromium tanning process as a basis to propose further improvement actions. Four main subsystems were considered: beamhouse, tanyard, retanning, and wood furnace. Damages to human health, ecosystem quality, and resources are mainly produced by the tanyard subsystem. The control and reduction of chromium and ammonia emissions are the critical points to be considered to improve the environmental performance of the process. Technologies available for improved management of chromium tanning were profoundly studied, and improvement actions related to optimized operational conditions and a high exhaustion chrome-tanning process were selected. These actions related to the implementation of internal procedures affected the economy of the process with savings ranging from US dollars 8.63 to US dollars 22.5 for the processing of 1 ton of wet salt hides, meanwhile the global environmental impact was reduced to 44-50%. Moreover, the treatment of wastewaters was considered in two scenarios. Primary treatment presented the largest reduction of the environmental impact of the tanning process, while no significant improvement for the evaluated impact categories was achieved when combining primary and secondary treatments.

Environmental impacts and resource use of milk production on the North China Plain, based on life cycle assessment.

PubMed

Wang, Xiaoqin; Ledgard, Stewart; Luo, Jiafa; Guo, Yongqin; Zhao, Zhanqin; Guo, Liang; Liu, Song; Zhang, Nannan; Duan, Xueqin; Ma, Lin

2018-06-01

Life cycle assessment methodology was used to quantify the environmental impacts and resource use of milk production on the North China Plain, the largest milk production area in China. Variation in environmental burden caused by cow productivity was evaluated, as well as scenario analysis of the effects of improvement practices. The results indicated that the average environmental impact potential and resource use for producing 1kg of fat and protein corrected milk was 1.34kgCO 2 eq., 9.27gPO 4 3- eq., 19.5gSO 2 eq., 4.91MJ, 1.83m 2 and 266L for global warming potential (GWP), eutrophication potential (EP), acidification potential (AP), non-renewable energy use (NREU), land use (LU) and blue water use (BWU; i.e. water withdrawal), respectively. Feed production was a significant determinant of GWP, NREU, LU and BWU, while AP and EP were mainly affected by manure management. Scenario analysis showed that reducing use of concentrates and substituting with alfalfa hay decreased GWP, EP, AP, NREU and LU (by 1.0%-5.5%), but caused a significant increase of BWU (by 17.2%). Using imported soybean instead of locally-grown soybean decreased LU by 2.6%, but significantly increased GWP and NREU by 20% and 6.9%, respectively. There was no single perfect manure management system, with variable effects from different management practices. The environmental burden shifting observed in this study illustrates the importance of assessing a wide range of impact categories instead of single or limited indicators for formulating environmental policies, and the necessity of combining multiple measures to decrease the environmental burden. For the North China Plain, improving milking cow productivity and herd structure (i.e. increased proportion of milking cows), combining various manure management systems, and encouraging dairy farmers to return manure to nearby crop lands are promising measures to decrease multiple environmental impacts. Copyright © 2017 Elsevier B.V. All rights reserved.

A study on the impact of the GLOBE program on students' attitudes regarding environmental issues

NASA Astrophysics Data System (ADS)

Manfready, Gary Martin

A key objective in environmental curricula should be to instill responsible and concerned attitudes toward environmental issues. This can be accomplished through the application of innovative programs which emphasize the development of the affective domain of learning. The development of personal attitudes is one form of evidence that the affective domain is being addressed. This study was undertaken to determine the impact of the GLOBE program (Global Learning and Observation to Benefit the Environment) on the attitudes of students toward environmental issues. Three hundred and five middle and high school level students from four states were surveyed to determine their attitudes toward selected environmental statements. Results demonstrated that attitudes toward environmental issues of GLOBE students were significantly greater than non-GLOBE students. Additional analysis demonstrated that regardless of grade levels, gender, racial and ethnicity backgrounds, depth of GLOBE involvement, and degree of teachers' GLOBE experiences, GLOBE students display similar levels of attitudes toward environmental issues. Establishment of a reliable Likert scale measurement instrument was accomplished. Permission to use an existing survey was obtained. Additional items were added to increase validity. Establishment of reliability was accomplished through a Guttman split half analysis of the piloted instrument. Through the use of factor analysis, four categories or sub-groupings of attitudes were determined to exist. Reliability was established for the factors. These sub-groupings were identified as personal commitment to environmental protection, awareness of avenues for action, loci of control, and students' perception of teachers' abilities to present environmental topics. These categories were a part of the analysis of four hypotheses.

Development of a system of indicators for sustainable port management.

PubMed

Peris-Mora, E; Diez Orejas, J M; Subirats, A; Ibáñez, S; Alvarez, P

2005-12-01

The 1998 project ECOPORT, "Towards A Sustainable Transport Network", developed by the Valencia Port Authority (VPA), established the bases for implementing an Environmental Management System (EMS) in industrial harbours. The use of data and information shall always be required to develop an efficient EMS. The objective of the present research (INDAPORT) study is to propose a system of sustainable environmental management indicators to be used by any port authorities. All activities performed within a port area are analysed for any potential environmental impacts and risks. An environmental analysis of port activities has been carried out with the objective of designing the indicators system. Twenty-one corresponding activities have been identified for large industrial ports. Subsequently, the same methodology developed to date will be later applied to other Spanish and European ports. The study has been developed by using an original system and a methodology, which simultaneously use stage diagrams and systemic models (material and energy flow charts). Multi-criteria analysis techniques were used to evaluate potential impacts (identification of factors and evaluation of impacts).

Environmental assessment of pavement infrastructure: A systematic review.

PubMed

Inyim, Peeraya; Pereyra, Jose; Bienvenu, Michael; Mostafavi, Ali

2016-07-01

Through a critical review and systematic analysis of pavement life cycle assessment (LCA) studies published over the past two decades, this study shows that the available information regarding the environmental impacts of pavement infrastructure is not sufficient to determine what pavement type is more environmentally sustainable. Limitations and uncertainties related to data, system boundary and functional unit definitions, consideration of use and maintenance phase impacts, are identified as the main reasons for inconsistency of reported results in pavement LCA studies. The study outcomes also highlight the need for advancement of knowledge pertaining to: (1) utilization of performance-adjusted functional units, (2) accurate estimation of use, maintenance, and end-of-life impacts, (3) incorporation of the dynamic and uncertain nature of pavement condition performance in impact assessment; (4) development of region-specific inventory data for impact estimation; and (5) consideration of a standard set of impact categories for comparison of environmental performance of different pavement types. Advancing the knowledge in these areas is critical in providing consistent and reliable results to inform decision-making toward more sustainable roadway infrastructure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Four conceptual issues to consider in integrating social and environmental factors in risk and impact assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domínguez-Gómez, J. Andrés, E-mail: andres@uhu.es

In the last twenty years, both the increase in academic production and the expansion of professional involvement in Environmental Impact Assessment (EIA) and Social Impact Assessment (SIA) have evidenced growing scientific and business interest in risk and impact analysis. However, this growth has not brought with it parallel progress in addressing the main shortcomings of EIA/SIA, i.e. insufficient integration of environmental and social factors into development project analyses and, in cases where the social aspects are considered, technical-methodological failings in their analysis and assessment. It is clear that these weaknesses carry with them substantial threats to the sustainability (social, environmentalmore » and economic) of projects which impact on the environment, and consequently to the local contexts where they are carried out and to the delicate balance of the global ecosystem. This paper argues that, in a sociological context of complexity and dynamism, four conceptual elements should underpin approaches to socio-environmental risk and impact assessment in development projects: a theoretical base in actor–network theory; an ethical grounding in values which are internationally recognized (though not always fulfilled in practice); a (new) epistemological-scientific base; and a methodological foundation in social participation. - Highlights: • A theoretical foundation in actor–network theory • An ethical grounding in values which are internationally recognized, but rarely carried through into practice • A (new) epistemological-scientific base • A methodological foundation in social participation.« less

A Framework for Integrating Environmental Justice in Regulatory Analysis

PubMed Central

Nweke, Onyemaechi C.

2011-01-01

With increased interest in integrating environmental justice into the process for developing environmental regulations in the United States, analysts and decision makers are confronted with the question of what methods and data can be used to assess disproportionate environmental health impacts. However, as a first step to identifying data and methods, it is important that analysts understand what information on equity impacts is needed for decision making. Such knowledge originates from clearly stated equity objectives and the reflection of those objectives throughout the analytical activities that characterize Regulatory Impact Analysis (RIA), a process that is traditionally used to inform decision making. The framework proposed in this paper advocates structuring analyses to explicitly provide pre-defined output on equity impacts. Specifically, the proposed framework emphasizes: (a) defining equity objectives for the proposed regulatory action at the onset of the regulatory process, (b) identifying specific and related sub-objectives for key analytical steps in the RIA process, and (c) developing explicit analytical/research questions to assure that stated sub-objectives and objectives are met. In proposing this framework, it is envisioned that information on equity impacts informs decision-making in regulatory development, and that this is achieved through a systematic and consistent approach that assures linkages between stated equity objectives, regulatory analyses, selection of policy options, and the design of compliance and enforcement activities. PMID:21776235

Zachary-Fort Lauderdale pipeline construction and conversion project: final supplement to final environmental impact statement. Docket No. CP74-192

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This Final Supplement to the Final Environmental Impact Statement (Final Supplement) evaluates the economic, engineering, and environmental aspects of newly developed alternatives to an abandonment/conversion project proposed by Florida Gas Transmission Company (Florida Gas). It also updates the staff's previous FEIS and studies revisions to the original proposal. Wherever possible, the staff has adopted portions of its previous FEIS in lieu of reprinting portions of that analysis which require no change. 60 references, 8 figures, 35 tables.

Fuzzy Decision Analysis for Integrated Environmental Vulnerability Assessment of the Mid-Atlantic Region

Treesearch

Liem T. Tran; C. Gregory Knight; Robert V. O' Neill; Elizabeth R. Smith; Kurt H. Riitters; James D. Wickham

2002-01-01

A fuzzy decision analysis method for integrating ecological indicators was developed. This was a combination of a fuzzy ranking method and the analytic hierarchy process (AHP). The method was capable of ranking ecosystems in terms of environmental conditions and suggesting cumulative impacts across a large region. Using data on land cover, population, roads, streams,...

Geographical Environment Factors and Risk Assessment of Tick-Borne Encephalitis in Hulunbuir, Northeastern China.

PubMed

Li, Yifan; Wang, Juanle; Gao, Mengxu; Fang, Liqun; Liu, Changhua; Lyu, Xin; Bai, Yongqing; Zhao, Qiang; Li, Hairong; Yu, Hongjie; Cao, Wuchun; Feng, Liqiang; Wang, Yanjun; Zhang, Bin

2017-05-26

Tick-borne encephalitis (TBE) is one of natural foci diseases transmitted by ticks. Its distribution and transmission are closely related to geographic and environmental factors. Identification of environmental determinates of TBE is of great importance to understanding the general distribution of existing and potential TBE natural foci. Hulunbuir, one of the most severe endemic areas of the disease, is selected as the study area. Statistical analysis, global and local spatial autocorrelation analysis, and regression methods were applied to detect the spatiotemporal characteristics, compare the impact degree of associated factors, and model the risk distribution using the heterogeneity. The statistical analysis of gridded geographic and environmental factors and TBE incidence show that the TBE patients mainly occurred during spring and summer and that there is a significant positive spatial autocorrelation between the distribution of TBE cases and environmental characteristics. The impact degree of these factors on TBE risks has the following descending order: temperature, relative humidity, vegetation coverage, precipitation and topography. A high-risk area with a triangle shape was determined in the central part of Hulunbuir; the low-risk area is located in the two belts next to the outside edge of the central triangle. The TBE risk distribution revealed that the impact of the geographic factors changed depending on the heterogeneity.

Multicriteria Decision Analysis of Material Selection of High Energy Performance Residential Building

NASA Astrophysics Data System (ADS)

Čuláková, Monika; Vilčeková, Silvia; Katunská, Jana; Krídlová Burdová, Eva

2013-11-01

In world with limited amount of energy sources and with serious environmental pollution, interest in comparing the environmental embodied impacts of buildings using different structure systems and alternative building materials will be increased. This paper shows the significance of life cycle energy and carbon perspective and the material selection in reducing energy consumption and emissions production in the built environment. The study evaluates embodied environmental impacts of nearly zero energy residential structures. The environmental assessment uses framework of LCA within boundary: cradle to gate. Designed alternative scenarios of material compositions are also assessed in terms of energy effectiveness through selected thermal-physical parameters. This study uses multi-criteria decision analysis for making clearer selection between alternative scenarios. The results of MCDA show that alternative E from materials on nature plant base (wood, straw bales, massive wood panel) present possible way to sustainable perspective of nearly zero energy houses in Slovak republic

Beyond Baby Steps: An Empirical Study of the Impact of Environmental Justice Executive Order 12898.

PubMed

Geltman, Elizabeth Glass; Gill, Gunwant; Jovanovic, Miriam

2016-01-01

This study evaluated the impact of Executive Order (EO) 12898 to advance environmental justice. We conducted a review evaluating the frequency and effective use of EO 12898 since execution with particular focus following President Obama's Plan EJ 2014. We found that both EO 12898 and Plan EJ 2104 had little, if any, impact on federal regulatory decision making. To the extent federal agencies discussed EO 12898, most did so in boilerplate rhetoric that satisfied compliance but was devoid of detailed thought or analysis. In the 21st year, with the exception of the Environmental Protection Agency, very little federal regulatory activity included references to EO 12898.

Governance of agro-pesticide through private environmental and social standards in the global cut flower chain from Ethiopia.

PubMed

Mengistie, Belay T; Mol, Arthur P J; Oosterveer, Peter

2017-11-01

The international cut flower industry is strongly criticized because of its environmental impacts and unsafe working conditions. Increasing certification of cut flowers is used to improve the growers' environmental and social performance. But what is the impact of this private governance instrument on regulating the use of pesticides? This paper assesses the potential of private certification on governing the environmental and social problems from pesticide use along the global cut flower supply chain. We use detailed farm-level data to analyse the environmental and social impacts of flower certification in Ethiopia by comparing different national and international certification schemes. Our analysis does not show significant differences between these different private standards for most environmental and health and safety variables. The Ethiopian cut flower industry remains far from improving its sustainability performance through private certification. However, certification schemes may enable farmers to have access to international markets and keep up their reputation.

Cumulative environmental impacts and integrated coastal management: the case of Xiamen, China.

PubMed

Xue, Xiongzhi; Hong, Huasheng; Charles, Anthony T

2004-07-01

This paper examines the assessment of cumulative environmental impacts and the implementation of integrated coastal management within the harbour of Xiamen, China, an urban region in which the coastal zone is under increasing pressure as a result of very rapid economic growth. The first stage of analysis incorporates components of a cumulative effects assessment, including (a) identification of sources of environmental impacts, notably industrial expansion, port development, shipping, waste disposal, aquaculture and coastal construction, (b) selection of a set of valued ecosystem components, focusing on circulation and siltation, water quality, sediment, the benthic community, and mangrove forests, and (c) use of a set of key indicators to examine cumulative impacts arising from the aggregate of human activities. In the second stage of analysis, the paper describes and assesses the development of an institutional framework for integrated coastal management in Xiamen, one that combines policy and planning (including legislative and enforcement mechanisms) with scientific and monitoring mechanisms (including an innovative 'marine functional zoning' system). The paper concludes that the integrated coastal management framework in Xiamen has met all relevant requirements for 'integration' as laid out in the literature, and has explicitly incorporated consideration of cumulative impacts within its management and monitoring processes.

Environmental impact of mushroom compost production.

PubMed

Leiva, Francisco; Saenz-Díez, Juan-Carlos; Martínez, Eduardo; Jiménez, Emilio; Blanco, Julio

2016-09-01

This research analyses the environmental impact of the creation of Agaricus bisporus compost packages. The composting process is the intermediate stage of the mushroom production process, subsequent to the mycelium cultivation stage and prior to the fruiting bodies cultivation stage. A full life cycle assessment model of the Agaricus bisporus composting process has been developed through the identification and analysis of the inputs-outputs and energy consumption of the activities involved in the production process. The study has been developed based on data collected from a plant during a 1 year campaign, thereby obtaining accurate information used to analyse the environmental impact of the process. A global analysis of the main stages of the process shows that the process that has the greatest impact in most categories is the compost batch preparation process. This is due to an increased consumption of energy resources by the machinery that mixes the raw materials to create the batch. At the composting process inside the tunnel stage, the activity that has the greatest impact in almost all categories studied is the initial stage of composting. This is due to higher energy consumption during the process compared to the other stages. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

What weight should be assigned to future environmental impacts? A probabilistic cost benefit analysis using recent advances on discounting.

PubMed

Almansa, Carmen; Martínez-Paz, José M

2011-03-01

Cost-benefit analysis is a standard methodological platform for public investment evaluation. In high environmental impact projects, with a long-term effect on future generations, the choice of discount rate and time horizon is of particular relevance, because it can lead to very different profitability assessments. This paper describes some recent approaches to environmental discounting and applies them, together with a number of classical procedures, to the economic evaluation of a plant for the desalination of irrigation return water from intensive farming, aimed at halting the degradation of an area of great ecological value, the Mar Menor, in South Eastern Spain. A Monte Carlo procedure is used in four CBA approaches and three time horizons to carry out a probabilistic sensitivity analysis designed to integrate the views of an international panel of experts in environmental discounting with the uncertainty affecting the market price of the project's main output, i.e., irrigation water for a water-deprived area. The results show which discounting scenarios most accurately estimate the socio-environmental profitability of the project while also considering the risk associated with these two key parameters. The analysis also provides some methodological findings regarding ways of assessing financial and environmental profitability in decisions concerning public investment in the environment. Copyright © 2010 Elsevier B.V. All rights reserved.

Survey of the effect of odour impact on communities.

PubMed

Hayes, J E; Stevenson, R J; Stuetz, R M

2017-12-15

In the context of environmental malodour, surveys are valuable as they allow for the relatively detailed analysis of multiple factors pertaining to odour perception and subsequent reaction. However, the causes for an individual to experience odour impact while a neighbour will not are still not understood. The goal of this current survey design was to consolidate varying research paths for surveys within the environmental odour research space. This survey investigated the area of effect for wastewater treatment plants by using stratified random sampling techniques that radiated from the industrial areas. Additionally, this survey provided a "non-alerted" response to environmental malodour that represents a step forward for ecological validity. We found a small number of items relating to odour annoyance and home ownership that can be used in order to predict odour impact for individual community members. However, we also did not find any relationship with odour impact and perceived control. This survey design and analysis reconciles the varied approaches towards community surveys administered in prior literature, as well as providing information to improve future community engagement policies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Erosion risk analysis by GIS in environmental impact assessments: a case study--Seyhan Köprü Dam construction.

PubMed

Sahin, S; Kurum, E

2002-11-01

Environmental Impact Assessment (EIA) is a systematically constructed procedure whereby environmental impacts caused by proposed projects are examined. Geographical Information Systems (GIS) are crucially efficient tools for impact assessment and their use is likely to dramatically increase in the near future. GIS have been applied to a wide range of different impact assessment projects and dams among them have been taken as the case work in this article. EIA Regulation in force in Turkey requires the analysis of steering natural processes that can be adversely affected by the proposed project, particularly in the section of the analysis of the areas with higher landscape value. At this point, the true potential value of GIS lies in its ability to analyze spatial data with accuracy. This study is an attempt to analyze by GIS the areas with higher landscape value in the impact assessment of dam constructions in the case of Seyhan-Köprü Hydroelectric Dam project proposal. A method needs to be defined before the overlapping step by GIS to analyze the areas with higher landscape value. In the case of Seyhan-Köprü Hydroelectric Dam project proposal of the present work, considering the geological conditions and the steep slopes of the area and the type of the project, the most important natural process is erosion. Therefore, the areas of higher erosion risk were considered as the Areas with Higher Landscape Value from the conservation demands points of view.

Environmental analysis for pipeline gas demonstration plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stinton, L.H.

1978-09-01

The Department of Energy (DOE) has implemented programs for encouraging the development and commercialization of coal-related technologies, which include coal gasification demonstration-scale activities. In support of commercialization activities the Environmental Analysis for Pipeline Gas Demonstration Plants has been prepared as a reference document to be used in evaluating potential environmental and socioeconomic effects from construction and operation of site- and process-specific projects. Effluents and associated impacts are identified for six coal gasification processes at three contrasting settings. In general, impacts from construction of a high-Btu gas demonstration plant are similar to those caused by the construction of any chemical plantmore » of similar size. The operation of a high-Btu gas demonstration plant, however, has several unique aspects that differentiate it from other chemical plants. Offsite development (surface mining) and disposal of large quantities of waste solids constitute important sources of potential impact. In addition, air emissions require monitoring for trace metals, polycyclic aromatic hydrocarbons, phenols, and other emissions. Potential biological impacts from long-term exposure to these emissions are unknown, and additional research and data analysis may be necessary to determine such effects. Possible effects of pollutants on vegetation and human populations are discussed. The occurrence of chemical contaminants in liquid effluents and the bioaccumulation of these contaminants in aquatic organisms may lead to adverse ecological impact. Socioeconomic impacts are similar to those from a chemical plant of equivalent size and are summarized and contrasted for the three surrogate sites.« less

Greenhouse gas emission mitigation relevant to changes in municipal solid waste management system.

PubMed

Pikoń, Krzysztof; Gaska, Krzysztof

2010-07-01

Standard methods for assessing the environmental impact of waste management systems are needed to underpin the development and implementation of sustainable waste management practice. Life cycle assessment (LCA) is a tool for comprehensively ensuring such assessment and covers all impacts associated with waste management. LCA is often called "from cradle to grave" analysis. This paper integrates information on the greenhouse gas (GHG) implications of various management options for some of the most common materials in municipal solid waste (MSW). Different waste treatment options for MSW were studied in a system analysis. Different combinations of recycling (cardboard, plastics, glass, metals), biological treatment (composting), and incineration as well as land-filling were studied. The index of environmental burden in the global warming impact category was calculated. The calculations are based on LCA methodology. All emissions taking place in the whole life cycle system were taken into account. The analysis included "own emissions," or emissions from the system at all stages of the life cycle, and "linked emissions," or emissions from other sources linked with the system in an indirect way. Avoided emissions caused by recycling and energy recovery were included in the analysis. Displaced emissions of GHGs originate from the substitution of energy or materials derived from waste for alternative sources. The complex analysis of the environmental impact of municipal waste management systems before and after application of changes in MSW systems according to European Union regulations is presented in this paper. The evaluation is made for MSW systems in Poland.

Environmentalism and elitism: a conceptual and empirical analysis

NASA Astrophysics Data System (ADS)

Morrison, Denton E.; Dunlap, Riley E.

1986-09-01

The frequent charge that environmentalism is “elitist” is examined conceptually and empirically. First, the concept of elitism is analyzed by distinguishing between three types of accusations made against the environmental movement: (a) compositional elitism suggests that environmentalists are drawn from privileged socioeconomic strata, (b) ideological elitism suggests that environmental reforms are a subterfuge for distributing benefits to environmentalists and/or costs to others, and (c) impact elitism suggests that environmental reforms, whether intentionally or not, do in fact have regressive social impacts. The evidence bearing on each of the three types of elitism is examined in some detail, and the following conclusions are drawn: Compositional elitism is an exaggeration, for although environmentalists are typically above average in socioeconomic status (as are most sociopolitical activists), few belong to the upper class. Ideological elitism may hold in some instances, but environmentalists have shown increasing sensitivity to equity concerns and there is little evidence of consistent pursuit of self-interest. Impact elitism is the most important issue, and also the most difficult to assess. It appears that there has been a general tendency for environmental reforms to have regressive impacts. However, it is increasingly recognized that problems such as workplace pollution and toxic waste contamination disproportionately affect the lower socioeconomic strata, and thus reforms aimed at such problems will likely have more progressive impacts.

Environmental Impact Analysis Process. Environmental Impact Statement, Flight Operations in the Sells Airspace Overlying the Tohono O’Odham Indian Reservation & Organ Pipe Cactus National Monument, Southern Arizona. Revised Draft

DTIC Science & Technology

1986-06-06

farm animals (horses, beef cattle, turkeys, broilers , sheep, dairy cattle and pheasants) at Edwards AFB during 1966 show, except for avian species...15 15 loss of hearing, effects on mental health, effects on the circulatory system such as hypertension, digestive system problems, etc. Invlew of the

ALTERNATIVES FOR REDUCING INSECTICIDES ON COTTON AND CORN: ECONOMIC AND ENVIRONMENTAL IMPACT - SUPPLEMENT 1: DETAILED DATA FOR STATIC AND LINEAR ANALYSIS OF ALTERNATIVES FOR REDUCING INSECTICIDES ON COTTON AND CORN

EPA Science Inventory

The report lists the expected insect control costs and insecticide use per acre for each insect control method on corn and cotton in each region discussed in Alternatives for Reducing Insecticides on Cotton and Corn: Economic and Environmental Impact. All the runs used in the lin...

32 CFR Appendix - Figures 4 through 8 to Subpart F of Part 651

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Figures 4 through 8 to Subpart F of Part 651 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement Existing EISs. Pt. 651, Subpt...

47 CFR 1.1311 - Environmental information to be included in the environmental assessment (EA).

Code of Federal Regulations, 2014 CFR

2014-10-01

... earth stations, a description of the facilities as well as supporting structures and appurtenances, and..., the applicant's analysis must utilize the best scientific and commercial data available, see 50 CFR...'s environmental impact, if any. The EA shall deal specifically with any feature of the site which...

47 CFR 1.1311 - Environmental information to be included in the environmental assessment (EA).

Code of Federal Regulations, 2013 CFR

2013-10-01

... earth stations, a description of the facilities as well as supporting structures and appurtenances, and..., the applicant's analysis must utilize the best scientific and commercial data available, see 50 CFR...'s environmental impact, if any. The EA shall deal specifically with any feature of the site which...

47 CFR 1.1311 - Environmental information to be included in the environmental assessment (EA).

Code of Federal Regulations, 2012 CFR

2012-10-01

... earth stations, a description of the facilities as well as supporting structures and appurtenances, and..., the applicant's analysis must utilize the best scientific and commercial data available, see 50 CFR...'s environmental impact, if any. The EA shall deal specifically with any feature of the site which...

Planning practice in support of economically and environmentally sustainable roads in floodplains: the case of the Mekong delta floodplains.

PubMed

Douven, Wim; Buurman, Joost

2013-10-15

Road development in relatively undisturbed floodplain systems, such as the floodplains of the Mekong River, will impact hydraulics and interrupt the natural flow of water. This affects the ecology and environment, and the livelihoods of people who depend on fishing and agriculture. On the other hand, floods can severely damage road infrastructure in years with large floods and can cause high annual maintenance costs. Improving road development practices in floodplains is a complex, multidimensional task involving hydraulic and geotechnical analysis, ecosystem analysis, socio-economic analysis, policy analysis, etc. This paper analyses the planning practice of road development and rehabilitation and how this practice can be improved in support of economically and environmentally sustainable roads in floodplains. It is concluded that although ample technical, planning and environmental assessment guidelines exist, guidelines need updating to address cumulative impacts at floodplain level and factors hampering the implementation in guidelines should be addressed in the guideline design (process). Copyright © 2013 Elsevier Ltd. All rights reserved.

77 FR 9610 - Gastroenterology-Urology Devices; Reclassification of Sorbent Hemoperfusion Devices for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

..., substances. and drugs (e.g., adsorption of glucose, unspecific removal characteristics, drop in patients... Sec. 860.130 of the regulations. XIV. Environmental Impact The Agency has determined under 21 CFR 25... impact statement is required. XV. Analysis of Impacts FDA has examined the impacts of the proposed rule...

Foundation stones for a real socio-environmental integration in projects' impact assessments

NASA Astrophysics Data System (ADS)

Andres Dominguez-Gomez, J.

2015-04-01

In the last twenty years, both the increase in academic production and the expansion of professional involvement in Environmental Impact Assessment (EIA) and Social Impact Assessment (SIA), have evidenced growing scientific and business interest in risk and impact analysis. However, this growth has not brought with it a parallel progress in addressing their main shortcomings: insufficient integration of environmental and social features into development project analyses and, in cases where the social aspects are considered, technical-methodological failings in their diagnosis and assessment. It is clear that these weaknesses carry with them substantial threats to the sustainability (social, environmental and economic) of schemes which impact on the environment, and in consequence, to the local contexts where they are carried out and to the delicate balance of the global ecosystem. This paper argue that, in a sociological context of growing complexity, four foundation-stones are required to underpin research methodologies (for both diagnosis and assessment) in the socio-environmental risks of development projects: a theoretical foundation in actor-network theory; an ethical grounding in values which are internationally recognized though not always carried through into practice; a (new) epistemological-scientific base; and a methodological foundation in social participation.

Evaluating the environmental impacts of a nano-enhanced field emission display using life cycle assessment: a screening-level study.

PubMed

Upadhyayula, Venkata K K; Meyer, David E; Curran, Mary Ann; Gonzalez, Michael A

2014-01-21

Carbon nanotube (CNT) field emission displays (FEDs) are currently in the product development stage and are expected to be commercialized in the near future because they offer image quality and viewing angles comparable to a cathode ray tube (CRT) while using a thinner structure, similar to a liquid crystal display (LCD), and enable more efficient power consumption during use. To address concerns regarding the environmental performance of CNT-FEDs, a screening-level, cradle-to-grave life cycle assessment (LCA) was conducted based on a functional unit of 10,000 viewing hours, the viewing lifespan of a CNT-FED. Contribution analysis suggests the impacts for material acquisition and manufacturing are greater than the combined impacts for use and end-of-life. A scenario analysis of the CNT paste composition identifies the metal components used in the paste are key contributors to the impacts of the upstream stages due to the impacts associated with metal preparation. Further improvement of the manufacturing impacts is possible by considering the use of plant-based oils, such as rapeseed oil, as alternatives to organic solvents for dispersion of CNTs. Given the differences in viewing lifespan, the impacts of the CNT-FED were compared with a LCD and a CRT display to provide more insight on how to improve the CNT-FED to make it a viable product alternative. When compared with CRT technology, CNT-FEDs show better environmental performance, whereas a comparison with LCD technology indicates the environmental impacts are roughly the same. Based on the results, the enhanced viewing capabilities of CNT-FEDs will be a more viable display option if manufacturers can increase the product's expected viewing lifespan.

75 FR 65463 - Notice of Availability of Record of Decision for the Supplemental Environmental Impact Statement...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-25

... analysis of the effects of its actions in compliance with the Endangered Species Act, the Coastal Zone... Populations and EO 13045, Protection of Children from Environmental Health Risks and Safety Risks...

Extending aircraft performance modeling capabilities in the Aviation Environmental Design Tool (AEDT)

DOT National Transportation Integrated Search

2011-01-01

To support improved analysis of the environmental impacts of proposed global aircraft operational changes, the United States Federal Aviation Administration recently worked : with European academic partners to update the airport terminal area fuel co...

75 FR 71730 - General Management Plan/Wilderness Study/Off-Road Vehicle Management Plan, Final Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... Planning, Environmental Impact Analysis, and Decision- making), the NPS announces the availability of a... National Park Service will execute a Record of Decision (ROD) no sooner than 30 days following publication...

47 CFR 1.1308 - Consideration of environmental assessments (EAs); findings of no significant impact.

Code of Federal Regulations, 2011 CFR

2011-10-01

... which shall explain the environmental consequences of the proposal and set forth sufficient analysis for the Bureau or the Commission to reach a determination that the proposal will or will not have a...

Environmental Quality and the U.S. Power Sector: Air Quality, Land Use and Environmental Justice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Massetti, Emanuele; Brown, Marilyn Ann; Lapsa, Melissa Voss

This baseline report summarizes key environmental quality issues associated with electricity generation, transmission, distribution, and end use in the United States. Its scope includes non-greenhouse gas air pollution (i.e., sulfur dioxide, nitrogen oxides, particulate matter and hazardous air pollutants), land use, water pollution, ecological impacts, human health, and environmental justice. The discussion characterizes both current impacts and recent trends, as well as assessments of key drivers of change. For example, the air emissions section includes a quantitative decomposition analysis of the drivers of change in sulfur dioxide emissions reductions from coal-fired power plants. The report is divided into four topicalmore » sections: air emissions, land use and ecology, water quality, and environmental justice.« less

Quantifying the environmental impact of a Li-rich high-capacity cathode material in electric vehicles via life cycle assessment.

PubMed

Wang, Yuqi; Yu, Yajuan; Huang, Kai; Chen, Bo; Deng, Wensheng; Yao, Ying

2017-01-01

A promising Li-rich high-capacity cathode material (xLi 2 MnO 3 ·(1-x)LiMn 0.5 Ni 0.5 O 2 ) has received much attention with regard to improving the performance of lithium-ion batteries in electric vehicles. This study presents an environmental impact evaluation of a lithium-ion battery with Li-rich materials used in an electric vehicle throughout the life cycle of the battery. A comparison between this cathode material and a Li-ion cathode material containing cobalt was compiled in this study. The battery use stage was found to play a large role in the total environmental impact and high greenhouse gas emissions. During battery production, cathode material manufacturing has the highest environmental impact due to its complex processing and variety of raw materials. Compared to the cathode with cobalt, the Li-rich material generates fewer impacts in terms of human health and ecosystem quality. Through the life cycle assessment (LCA) results and sensitivity analysis, we found that the electricity mix and energy efficiency significantly influence the environmental impacts of both battery production and battery use. This paper also provides a detailed life cycle inventory, including firsthand data on lithium-ion batteries with Li-rich cathode materials.

Analysis of the holistic impact of the Hydrogen Economy on the coal industry

NASA Astrophysics Data System (ADS)

Lusk, Shannon Perry

As gas prices soar and energy demand continues to grow amidst increasingly stringent environmental regulations and an assortment of global pressures, implementing alternative energy sources while considering their linked economic, environmental and societal impacts becomes a more pressing matter. The Hydrogen Economy has been proposed as an answer to meeting the increasing energy demand for electric power generation and transportation in an environmentally benign way. Based on current hydrogen technology development, the most practical feedstock to fuel the Hydrogen Economy may prove to be coal via hydrogen production at FutureGen plants. The planned growth of the currently conceived Hydrogen Economy will cause dramatic impacts, some good and some bad, on the economy, the environment, and society, which are interlinked. The goal of this research is to provide tools to inform public policy makers in sorting out policy options related to coal and the Hydrogen Economy. This study examines the impact of a transition to a Hydrogen Economy on the coal industry by creating FutureGen penetration models, forecasting coal MFA's which clearly provide the impact on coal production and associated environmental impacts, and finally formulating a goal programming model that seeks the maximum benefit to society while analyzing the trade-offs between environmental, social, and economical concerns related to coal and the Hydrogen Economy.

Identification of linkages between potential Environmental and Social Impacts of Surface Mining and Ecosystem Services in Thar Coal field, Pakistan

NASA Astrophysics Data System (ADS)

Hina, A.

2017-12-01

Although Thar coal is recognized to be one of the most abundant fossil fuel that could meet the need to combat energy crisis of Pakistan, but there still remains a challenge to tackle the associated environmental and socio-ecological changes and its linkage to the provision of ecosystem services of the region. The study highlights the importance of considering Ecosystem service assessment to be undertaken in all strategic Environmental and Social Assessments of Thar coal field projects. The three-step approach has been formulated to link the project impacts to the provision of important ecosystem services; 1) Identification of impact indicators and parameters by analyzing the environmental and social impacts of surface mining in Thar Coal field through field investigation, literature review and stakeholder consultations; 2) Ranking of parameters and criteria alternatives using Multi-criteria Decision Analysis(MCDA) tool: (AHP method); 3) Using ranked parameters as a proxy to prioritize important ecosystem services of the region; The ecosystem services that were prioritized because of both high significance of project impact and high project dependence are highlighted as: Water is a key ecosystem service to be addressed and valued due to its high dependency in the area for livestock, human wellbeing, agriculture and other purposes. Crop production related to agricultural services, in association with supply services such as soil quality, fertility, and nutrient recycling and water retention need to be valued. Cultural services affected in terms of land use change and resettlement and rehabilitation factors are recommended to be addressed. The results of the analysis outline a framework of identifying these linkages as key constraints to foster the emergence of green growth and development in Pakistan. The practicality of implementing these assessments requires policy instruments and strategies to support human well-being and social inclusion while minimizing environmental degradation and loss of ecosystem services. Keywords Ecosystem service assessment; Environmental and Social Impact Assessment; coal mining; Thar Coal Field; Sustainable development

Binary logistic regression-Instrument for assessing museum indoor air impact on exhibits.

PubMed

Bucur, Elena; Danet, Andrei Florin; Lehr, Carol Blaziu; Lehr, Elena; Nita-Lazar, Mihai

2017-04-01

This paper presents a new way to assess the environmental impact on historical artifacts using binary logistic regression. The prediction of the impact on the exhibits during certain pollution scenarios (environmental impact) was calculated by a mathematical model based on the binary logistic regression; it allows the identification of those environmental parameters from a multitude of possible parameters with a significant impact on exhibitions and ranks them according to their severity effect. Air quality (NO 2 , SO 2 , O 3 and PM 2.5 ) and microclimate parameters (temperature, humidity) monitoring data from a case study conducted within exhibition and storage spaces of the Romanian National Aviation Museum Bucharest have been used for developing and validating the binary logistic regression method and the mathematical model. The logistic regression analysis was used on 794 data combinations (715 to develop of the model and 79 to validate it) by a Statistical Package for Social Sciences (SPSS 20.0). The results from the binary logistic regression analysis demonstrated that from six parameters taken into consideration, four of them present a significant effect upon exhibits in the following order: O 3 >PM 2.5 >NO 2 >humidity followed at a significant distance by the effects of SO 2 and temperature. The mathematical model, developed in this study, correctly predicted 95.1 % of the cumulated effect of the environmental parameters upon the exhibits. Moreover, this model could also be used in the decisional process regarding the preventive preservation measures that should be implemented within the exhibition space. The paper presents a new way to assess the environmental impact on historical artifacts using binary logistic regression. The mathematical model developed on the environmental parameters analyzed by the binary logistic regression method could be useful in a decision-making process establishing the best measures for pollution reduction and preventive preservation of exhibits.

Urbanization and carbon dioxide emissions in Singapore: evidence from the ARDL approach.

PubMed

Ali, Hamisu Sadi; Abdul-Rahim, A S; Ribadu, Mohammed Bashir

2017-01-01

The main aim of this article is to examine empirically the impact of urbanization on carbon dioxide emissions in Singapore from 1970 to 2015. The autoregressive distributed lags (ARDL) approach is applied within the analysis. The main finding reveals a negative and significant impact of urbanization on carbon emissions in Singapore, which means that urban development in Singapore is not a barrier to the improvement of environmental quality. Thus, urbanization enhances environmental quality by reducing carbon emissions in the sample country. The result also highlighted that economic growth has a positive and significant impact on carbon emissions, which suggests that economic growth reduces environmental quality through its direct effect of increasing carbon emissions in the country. Despite the high level of urbanization in Singapore, which shows that 100 % of the populace is living in the urban center, it does not lead to more environmental degradation. Hence, urbanization will not be considered an obstacle when initiating policies that will be used to reduce environmental degradation in the country. Policy makers should consider the country's level of economic growth instead of urbanization when formulating policies to reduce environmental degradation, due to its direct impact on increasing carbon dioxide emissions.

CRITICAL ANALYSIS OF THE MATHEMATICAL RELATIONSHIPS AND COMPREHENSIVENESS OF LIFE CYCLE IMPACT ASSESSMENT APPROACHES

EPA Science Inventory

The impact assessment phase of Life Cycle Assessment (LCA) has received much criticism due to lack of consistency. ISO 14042 requires selection of impact categories that “reflect a comprehensive set of environmental issues” related to the system being studied, especi...

[Environmental Hazards Assessment Program annual report, June 1992--June 1993]. Use of diatom distributions to monitor environmental health

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, R.H.

1993-12-01

A variety of approaches has been used in the past to assess the environmental impact of anthropogenic contaminants. One reliable index for aquatic environments is the analysis of diatom species distribution; the focus in this case being on the Savannah River. The completed objectives of this study were: (A) the development and use of procedures for measuring diatom distribution in the water column and (B) the development and evaluation of sediment sampling methods for retrospective analysis.

From water use to water scarcity footprinting in environmentally extended input-output analysis.

PubMed

Ridoutt, Bradley George; Hadjikakou, Michalis; Nolan, Martin; Bryan, Brett A

2018-05-18

Environmentally extended input-output analysis (EEIOA) supports environmental policy by quantifying how demand for goods and services leads to resource use and emissions across the economy. However, some types of resource use and emissions require spatially-explicit impact assessment for meaningful interpretation, which is not possible in conventional EEIOA. For example, water use in locations of scarcity and abundance is not environmentally equivalent. Opportunities for spatially-explicit impact assessment in conventional EEIOA are limited because official input-output tables tend to be produced at the scale of political units which are not usually well aligned with environmentally relevant spatial units. In this study, spatially-explicit water scarcity factors and a spatially disaggregated Australian water use account were used to develop water scarcity extensions that were coupled with a multi-regional input-output model (MRIO). The results link demand for agricultural commodities to the problem of water scarcity in Australia and globally. Important differences were observed between the water use and water scarcity footprint results, as well as the relative importance of direct and indirect water use, with significant implications for sustainable production and consumption-related policies. The approach presented here is suggested as a feasible general approach for incorporating spatially-explicit impact assessment in EEIOA.

Integrating human health into environmental impact assessment: an unrealized opportunity for environmental health and justice.

PubMed

Bhatia, Rajiv; Wernham, Aaron

2008-08-01

The National Environmental Policy Act and related state laws require many public agencies to analyze and disclose potentially significant environmental effects of agency actions, including effects on human health. In this paper we review the purpose and procedures of environmental impact assessment (EIA), existing regulatory requirements for health effects analysis, and potential barriers to and opportunities for improving integration of human health concerns within the EIA process. We use statutes, regulations, guidelines, court opinions, and empirical research on EIA along with recent case examples of integrated health impact assessment (HIA)/EIA at both the state and federal level. We extract lessons and recommendations for integrated HIA/EIA practice from both existing practices as well as case studies. The case studies demonstrate the adequacy, scope, and power of existing statutory requirements for health analysis within EIA. The following support the success of integrated HIA/EIA: a proponent recognizing EIA as an available regulatory strategy for public health; the openness of the agency conducting the EIA; involvement of public health institutions; and complementary objectives among community stakeholders and health practitioners. We recommend greater collaboration among institutions responsible for EIA, public health institutions, and affected stakeholders along with guidance, resources, and training for integrated HIA/EIA practice.

Integrating Human Health into Environmental Impact Assessment: An Unrealized Opportunity for Environmental Health and Justice

PubMed Central

Bhatia, Rajiv; Wernham, Aaron

2008-01-01

Objectives The National Environmental Policy Act and related state laws require many public agencies to analyze and disclose potentially significant environmental effects of agency actions, including effects on human health. In this paper we review the purpose and procedures of environmental impact assessment (EIA), existing regulatory requirements for health effects analysis, and potential barriers to and opportunities for improving integration of human health concerns within the EIA process. Data sources We use statutes, regulations, guidelines, court opinions, and empirical research on EIA along with recent case examples of integrated health impact assessment (HIA)/EIA at both the state and federal level. Data synthesis We extract lessons and recommendations for integrated HIA/EIA practice from both existing practices as well as case studies. Conclusions The case studies demonstrate the adequacy, scope, and power of existing statutory requirements for health analysis within EIA. The following support the success of integrated HIA/EIA: a proponent recognizing EIA as an available regulatory strategy for public health; the openness of the agency conducting the EIA; involvement of public health institutions; and complementary objectives among community stakeholders and health practitioners. We recommend greater collaboration among institutions responsible for EIA, public health institutions, and affected stakeholders along with guidance, resources, and training for integrated HIA/EIA practice. PMID:18709140

Understanding the Influence of Environment on Adults’ Walking Experiences: A Meta-Synthesis Study

PubMed Central

Dadpour, Sara; Pakzad, Jahanshah; Khankeh, Hamidreza

2016-01-01

The environment has an important impact on physical activity, especially walking. The relationship between the environment and walking is not the same as for other types of physical activity. This study seeks to comprehensively identify the environmental factors influencing walking and to show how those environmental factors impact on walking using the experiences of adults between the ages of 18 and 65. The current study is a meta-synthesis based on a systematic review. Seven databases of related disciplines were searched, including health, transportation, physical activity, architecture, and interdisciplinary databases. In addition to the databases, two journals were searched. Of the 11,777 papers identified, 10 met the eligibility criteria and quality for selection. Qualitative content analysis was used for analysis of the results. The four themes identified as influencing walking were “safety and security”, “environmental aesthetics”, “social relations”, and “convenience and efficiency”. “Convenience and efficiency” and “environmental aesthetics” could enhance the impact of “social relations” on walking in some aspects. In addition, “environmental aesthetics” and “social relations” could hinder the influence of “convenience and efficiency” on walking in some aspects. Given the results of the study, strategies are proposed to enhance the walking experience. PMID:27447660

Secondary environmental impacts of remedial alternatives for sediment contaminated with hydrophobic organic contaminants.

PubMed

Choi, Yongju; Thompson, Jay M; Lin, Diana; Cho, Yeo-Myoung; Ismail, Niveen S; Hsieh, Ching-Hong; Luthy, Richard G

2016-03-05

This study evaluates secondary environmental impacts of various remedial alternatives for sediment contaminated with hydrophobic organic contaminants using life cycle assessment (LCA). Three alternatives including two conventional methods, dredge-and-fill and capping, and an innovative sediment treatment technique, in-situ activated carbon (AC) amendment, are compared for secondary environmental impacts by a case study for a site at Hunters Point Shipyard, San Francisco, CA. The LCA results show that capping generates substantially smaller impacts than dredge-and-fill and in-situ amendment using coal-based virgin AC. The secondary impacts from in-situ AC amendment can be reduced effectively by using recycled or wood-based virgin AC as production of these materials causes much smaller impacts than coal-based virgin AC. The secondary environmental impacts are highly sensitive to the dredged amount and the distance to a disposal site for dredging, the capping thickness and the distance to the cap materials for capping, and the AC dose for in-situ AC amendment. Based on the analysis, this study identifies strategies to minimize secondary impacts caused by different remediation activities: optimize the dredged amount, the capping thickness, or the AC dose by extensive site assessments, obtain source materials from local sites, and use recycled or bio-based AC. Copyright © 2015 Elsevier B.V. All rights reserved.

Biochar, compost and biochar-compost blend as options to recover nutrients and sequester carbon.

PubMed

Oldfield, Thomas L; Sikirica, Nataša; Mondini, Claudio; López, Guadalupe; Kuikman, Peter J; Holden, Nicholas M

2018-07-15

This work assessed the potential environmental impact of recycling organic materials in agriculture via pyrolysis (biochar) and composting (compost), as well its combination (biochar-compost blend) versus business-as-usual represented by mineral fertiliser. Life cycle assessment methodology was applied using data sourced from experiments (FP7 project Fertiplus) in three countries (Spain, Italy and Belgium), and considering three environmental impact categories, (i) global warming; (ii) acidification and (iii) eutrophication. The novelty of this analysis is the inclusion of the biochar-compost blend with a focus on multiple European countries, and the inclusion of the acidification and eutrophication impact categories. Biochar, compost and biochar-compost blend all resulted in lower environmental impacts than mineral fertiliser from a systems perspective. Regional differences were found between biochar, compost and biochar-compost blend. The biochar-compost blend offered benefits related to available nutrients and sequestered C. It also produced yields of similar magnitude to mineral fertiliser, which makes its acceptance by farmers more likely whilst reducing environmental impacts. However, careful consideration of feedstock is required. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of impacts and mitigation assessments for the UMTRA Project: Gunnison and Durango pilot studies. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beranich, S.J.

1994-08-24

This report evaluates the impacts assessment and proposed mitigations provided in environmental documents concerning the US Department of Energy`s (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. The projected impacts and proposed mitigations identified in UMTRA Project environmental documents were evaluated for two UMTRA Project sites. These sites are Gunnison and Durango, which are representative of currently active and inactive UMTRA Project sites, respectively. National Environmental Policy Act (NEPA) documentation was prepared for the remedial action at Durango and Gunnison as well as for the provision of an alternate water supply system at Gunnison. Additionally, environmental analysis was completed formore » mill site demolition Gunnison, and for a new road related to the Durango remedial action. The results in this report pertain only to the impact assessments prepared by the Regulatory Compliance staff as a part of the NEPA compliance requirements. Similarly, the mitigative measures documented are those that were identified during the NEPA process.« less

ENVIRONMENTAL ANALYSIS OF GASOLINE BLENDING COMPONENTS THROUGH THEIR LIFE CYCLE

EPA Science Inventory

The contributions of three major gasoline blending components (reformate, alkylate and cracked gasoline) to potential environmental impacts are assessed. This study estimates losses of the gasoline blending components due to evaporation and leaks through their life cycle, from pe...

A Comparative Study on the Environmental Impact of CO2 Supermarket Refrigeration Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beshr, Mohamed; Aute, Vikrant; Sharma, Vishaldeep

Supermarket refrigeration systems have high environmental impact due to their large refrigerant charge and high leak rates. Accordingly, the interest in using natural refrigerants, such as carbon dioxide (CO2), and new refrigerant blends with low GWP in such systems is increasing. In this paper, an open-source Life Cycle Climate Performance (LCCP) framework is presented and used to compare the environmental impact of three supermarket refrigeration systems. These systems include a transcritical CO2 booster system, a cascade CO2/N-40 system, and a baseline R-404A multiplex direct expansion system. The study is performed for cities representing different climates within the USA using EnergyPlusmore » to simulate the systems' hourly performance. Finally, a parametric analysis is performed to study the impact of annual leak rate on the systems' LCCP.« less

Environmental Impact Analysis Process. Draft Environmental Impact Statement, Winnersville Weapons Range, Lanier and Lowndes Counties, Georgia

DTIC Science & Technology

1985-07-01

pollutant emissions for flight activities over the proposed range (grams of pollutant per sortie)a Carbon Unburned Oxides of Particulates Oxides Aircraft...Table 4.4. HUD site acceptability standards ... ........... .. 55 Table 4.5. Predicted pollutant emissions for flight activties over the proposed range...matter, carbon monoxide, hydrocarbons, oxides of nitrogen, and oxides of sulfur to the regional pollution levels, but because of the amounts emitted and

Predator Force Structure Changes at Indian Springs Air Force Auxiliary Field, Nevada Environmental Assessment

DTIC Science & Technology

2003-07-01

Office Agency for Nuclear Projects Energy Agriculture Business & Industry Minerals Economic Development Tourism Fire Marshal Human Resources...Agriculture Business & Industry Minerals Economic Development Tourism Fire Marshal Human Resources A in Services Indian Commission Colorado...Data EIAP Environmental Impact Analysis Process EMCS Central Energy Management System ERP Environmental Restoration Program ESA Endangered

New York State School Facilities and Student Health, Achievement, and Attendance: A Data Analysis Report

ERIC Educational Resources Information Center

Boese, Stephen; Shaw, John

2005-01-01

Students who attend schools with environmental hazards that impact indoor air quality are more likely to miss class, and therefore lose learning opportunities. Yet school environmental health and safety remains largely unregulated and there is no state or federal agency in charge of protecting children's environmental health in schools. This…

75 FR 3729 - Environmental Impact Statements and Regulations; Availability of EPA Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-22

... to address downstream water quality impairment, and funding. Rating LO. EIS No. 20090403, ERP No. D... concerns about this project's potential air quality impacts, and recommended additional information and analysis regarding potential air quality impacts and mitigation be included in the FEIS. Rating EC1. EIS No...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ngunjiri, P.G.

The aim for this research is to review environmental impact assessment (EIA) practices in sub-Saharan Africa, drawing upon appropriate theoretical and methodological work on EIA. This study uses a comparative evaluation method to examine the extent of environmental impact assessment (EIA) in project analysis. It uses site and services low cost housing projects from Kenya. The research has three major components: (1) review of environmental practice in Sub-Saharan Africa through literature review and case studies; (2) review of general literature on EIA as practiced by international agencies and developed countries; and (3) formulation of more suitable guidelines for EIA proceduresmore » in Sub-Saharan Africa.« less

Environmental Impact Analysis Process. Final Environmental Impact Statement for Proposed Air Force Reserve Mission Change (C-130 to C-5A Aircraft) and Westover Metropolitan Development Corporation (Expansion of Civil Aviation Operations through 1995) at Westover Air Force Base, Massachusetts. Volume 1

DTIC Science & Technology

1987-04-01

many of which would not be acceptable under current environmental regula- tions but which were in compliance with the standards in effect at tK2 ...waste management regulations and issued a Notice of Violation (NOV) citing specific deficiencies in hazardous waste management procedures. The focus of...materials are handled and disposed of in compliance with applicable federal, state, and local regulations. Specific deficiencies cited in the NOV included

Sensitivity analysis in a life cycle assessment of an aged red wine production from Catalonia, Spain.

PubMed

Meneses, M; Torres, C M; Castells, F

2016-08-15

Sustainability in agriculture and food processing is an issue with a clear growing interest; especially in products were consumers have particular awareness regarding its environmental profile. This is the case of wine industry depending on grape production, winemaking and bottling. Also viticulture and generally agricultural production is significantly affected by climate variations. The aim of this article is to determine the environmental load of an aged red wine from a winery in Catalonia, Spain, over its entire life cycle, including sensitivity analysis of the main parameters related to the cultivation, vinification and bottling. The life cycle assessment (LCA) methodology is used for the environmental analysis. In a first step, life cycle inventory (LCI) data were collected by questionnaires and interviews with the winemaker, all data are actual operating data and all the stages involved in the production have been taken into account (viticulture, vinification, bottling and the disposal subsystem). Data were then used to determine the environmental profile by a life cycle impact assessment using the ReCiPe method. Annual variability in environmental performance, stresses the importance of including timeline analysis in the wine sector. Because of that this study is accompanied with a sensitivity analysis carried out by a Monte Carlo simulation that takes into account the uncertainty and variability of the parameters used. In this manner, the results are presented with confidence intervals to provide a wider view of the environmental issues derived from the activities of the studied wine estate regardless of the eventualities of a specific harvesting year. Since the beverage packaging has an important influence in this case, a dataset for the production of green glass was adapted to reflect the actual recycling situation in Spain. Furthermore, a hypothetical variation of the glass-recycling rate in the glass production completes this article, as a key variable of sensitivity analysis, in order… in order to show the potential reduction of total greenhouse gas emissions. It was found that in almost all categories the production of the glass bottles has the highest environmental impact (10%-80% depending on the impact category) followed by the viticulture stage, i.e. the agricultural activities (17%-84% depending on the impact category). The vinification step, i.e. the winemaking itself, has an almost negligible effect on the overall load (1%-5%). The sensitivity analysis showed that the results do not differ by more than ±4% from the expected values except for the water depletion indicator. With the variation of the recycling rate, it could be shown that an increase in the rate from 60% to 85% allows for a reduction of 102gCO2eq. per bottle (-11.1%). The results show that glass production causes the highest environmental load. The key parameters that determine the impact are the recycling rate and the bottle weight. A glass container deposit legislation might be a promising way to enhance the glass recycling. Lightweight bottles and alternative packaging should also be considered. Copyright © 2016 Elsevier B.V. All rights reserved.

46 CFR 504.6 - Finding of no significant impact.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Finding of no significant impact. 504.6 Section 504.6... POLICY ANALYSIS § 504.6 Finding of no significant impact. (a) If upon completion of an environmental assessment, it is determined that a potential or proposed action will not have a significant impact on the...

Holistic Evaluation of Decentralized Water Reuse: Life Cycle Assessment and Cost Analysis of Membrane Bioreactor Systems in Water Reuse Implementation

EPA Science Inventory

Understand environmental and cost impacts of transitional decentralized MBR systems with sewer mining Assess aerobic MBRs (AeMBR) and anaerobic MBRs (AnMBR) Use LCA and life cycle cost (LCC) analysis to quantify impacts Investigate LCA and LCC performance of MBRs under various re...

National income and environmental concern: Observations from 35 countries.

PubMed

Lo, Alex Y

2016-10-01

National income produces mixed impacts on public environmental concern. In a cross-national survey, environmental concern was measured in terms of propensity to act and environmental risk perception. Results of a multilevel regression analysis show that these two measures respond to gross domestic product per capita in opposite ways. Citizens of advanced industrial countries are more likely than those of lower-income countries to contribute to environmental protection. However, they are less likely to see the harmful impacts on the environment as very dangerous. Using an indicator of national adaptive capacity, this article demonstrates that environmental risk perception is a function of a country's estimated capacity for coping with condition changes. The stronger sense of collective security among citizens of wealthier nations offers a possible explanation for the negative effects of national income. These results indicate the complex relationship between development and public environmental concern across countries. © The Author(s) 2015.

Analysis and Assessment of Environmental Load of Vending Machines by a LCA Method, and Eco-Improvement Effect

NASA Astrophysics Data System (ADS)

Kimura, Yukio; Sadamichi, Yucho; Maruyama, Naoki; Kato, Seizo

These days the environmental impact due to vending machines'(VM) diffusion has greatly been discussed. This paper describes the numerical evaluation of the environmental impact by using the LCA (Life Cycle Assessment) scheme and then proposes eco-improvements' strategy toward environmentally conscious products(ECP). A new objective and universal consolidated method for the LCA-evaluation, so-called LCA-NETS(Numerical Eco-load Standardization ) developed by the authors is applied to the present issue. As a result, the environmental loads at the 5years' operation and the material procurement stages are found to dominate others over the life cycle. Further eco-improvement is realized by following the order of the LCA-NETS magnitude; namely, energy saving, materials reducing, parts' re-using, and replacing with low environmental load material. Above all, parts' re-using is specially recommendable for significant reduction of the environmental loads toward ECP.

An analysis of the Illinois Retail Rate Law and the Cook County waste-to-energy siting battles, 1987--2001

NASA Astrophysics Data System (ADS)

Sendzik, Mark Edward

2002-01-01

The analysis explores the environmental justice impacts of the 1998 Illinois Retail Rate Law and Cook County waste-to-energy siting proposals on the Chicago metropolitan area. Particular attention is given to the dynamics of the grassroots environmental organizations which emerged to fight the siting proposals. The organizations are examined in the context of NIMBYism, the antitoxic movement, the environmental justice movement, and mainstream environmentalism. In addition, the underlying causes for the unintended consequences of the Retail Rate Law are analyzed against the backdrop of market and government failure. Face-to-face and telephone interviews were conducted with forty-one persons familiar with the battles over the Cook County siting proposals and the efforts to repeal the Retail Rate Law. The term "environmental justice" became controversial as siting opponents and supporters both appropriated the issue to support dueling positions on the proposed sitings. However, environmental justice did not play an instrumental role in repealing the Retail Rate Law or the siting proposals. Economic concerns led to the repeal of the legislation and demise of the original siting proposals. The circumstances of the siting battles and opposition groups raise questions about the future effectiveness of the environmental justice movement. A combination of market and government failure led to the unintended consequences from the retail Rate Law. Strategic maneuvering by state legislative leaders delayed the repeal of the legislation by several years. The resulting delay placed considerable cost on individuals, communities, corporations, and the State of Illinois. A bivariate analysis was conducted to examine whether the distribution patterns of ground level concentrations from the proposed facilities would have had a disproportionate distribution in lower-income and minority populations in the Chicago metropolitan area. The statistical analysis did discover evidence that ground level concentrations from the proposed Cook County facilities would have had a disproportionate distribution in poor and minority communities. The exposure level from only one pollutant examined in the analysis would have exceeded health benchmark standards. However, the evidence supports the need for cumulative impact analyses to determine a more through impact of projects in some circumstances.

Physical Outdoor Activity versus Indoor Activity: Their Influence on Environmental Behaviors.

PubMed

Fang, Wei-Ta; Ng, Eric; Chang, Mei-Chuan

2017-07-17

There are strong evidences linking physical outdoor activity and health benefits; however, little is known about the impact on environmental behaviors. Thus, this study aims to close this gap by investigating the influence of physical outdoor activity on environmental behaviors. A total of 416 surveys were distributed to students in eight public primary schools located near the Hsinchu Science and Industrial Park in Taiwan. Findings from the analysis revealed that subjective norms had a more influential effect on environmental behaviors for participants who engaged in physical activity at outdoor parks. In contrast, descriptive norms had a direct predictive impact on environmental behaviors for participants whose main physical activity venue was at the indoor after-school centers. Research results also highlighted attitude as the strongest predictive variable influence on environmental behaviors for children who engaged in physical indoor and outdoor activities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosa, Josianne Claudia Sales, E-mail: jcsrosa@usp.br; Sánchez, Luis E., E-mail: lsanchez@usp.br

Considering ecosystem services (ES) could foster innovation and improve environmental and social impact assessment (ESIA) practice, but is the potential being fulfilled? In order to investigate how ES have been treated in recent international practice, three questions are asked: (i) were the tasks of an ES analysis carried out? (ii) how is such analysis integrated with other analysis presented in the ESIA? (iii) does ES analysis result in additional or improved mitigation or enhancement measures? These research questions were unfolded into 15 auxiliary questions for reviewing five ESIA reports prepared for mining, hydroelectric and transportation infrastructure projects in Africa, Asiamore » and South America. All cases incorporated ES into ESIA to meet a requirement of the International Finance Corporation's Performance Standards on Environmental and Social Sustainability. It was found that: (i) in only three cases most tasks recommended by current guidance were adopted (ii) all reports feature a dedicated ES chapter or section, but in three of them no evidence was found that the ES analysis was integrated within impact assessment (iii) in the two ESIAs that followed guidance, ES analysis resulted in specific mitigation measures. Few evidence was found that the ES concept is improving current ESIA practice. Key challenges are: (i) integrating ES analysis in such a way that it does not duplicate other analysis; (ii) adequately characterizing the beneficiaries of ES; and (iii) quantifying ES supply for impact prediction. - Highlights: • Incorporating ecosystem services analysis in impact assessment can improve results. • Additional impacts and mitigation were identified. • Challenges include developing appropriate indicators for impact prediction. • A key challenge is integrating the concept in such a way that it does not duplicate other analysis.« less

Framework Design and Influencing Factor Analysis of a Water Environmental Functional Zone-Based Effluent Trading System.

PubMed

Chen, Lei; Han, Zhaoxing; Li, Shuang; Shen, Zhenyao

2016-10-01

The efficacy of traditional effluent trading systems is questionable due to their neglect of seasonal hydrological variation and the creation of upstream hot spots within a watershed. Besides, few studies have been conducted to distinguish the impacts of each influencing factor on effluent trading systems outputs. In this study, a water environmental functional zone-based effluent trading systems framework was configured and a comprehensive analysis of its influencing factors was conducted. This proposed water environmental functional zone-based effluent trading systems was then applied for the control of chemical oxygen demand in the Beiyun River watershed, Beijing, China. Optimal trading results highlighted the integration of water quality constraints and different hydrological seasons, especially for downstream dischargers. The optimal trading of each discharger, in terms of pollutant reduction load and abatement cost, is greatly influenced by environmental and political factors such as background water quality, the location of river assessment points, and tradable discharge permits. In addition, the initial permit allowance has little influence on the market as a whole but does impact the individual discharger. These results provide information that is critical to understanding the impact of policy design on the functionality of an effluent trading systems.

Framework Design and Influencing Factor Analysis of a Water Environmental Functional Zone-Based Effluent Trading System

NASA Astrophysics Data System (ADS)

Chen, Lei; Han, Zhaoxing; Li, Shuang; Shen, Zhenyao

2016-10-01

The efficacy of traditional effluent trading systems is questionable due to their neglect of seasonal hydrological variation and the creation of upstream hot spots within a watershed. Besides, few studies have been conducted to distinguish the impacts of each influencing factor on effluent trading systems outputs. In this study, a water environmental functional zone-based effluent trading systems framework was configured and a comprehensive analysis of its influencing factors was conducted. This proposed water environmental functional zone-based effluent trading systems was then applied for the control of chemical oxygen demand in the Beiyun River watershed, Beijing, China. Optimal trading results highlighted the integration of water quality constraints and different hydrological seasons, especially for downstream dischargers. The optimal trading of each discharger, in terms of pollutant reduction load and abatement cost, is greatly influenced by environmental and political factors such as background water quality, the location of river assessment points, and tradable discharge permits. In addition, the initial permit allowance has little influence on the market as a whole but does impact the individual discharger. These results provide information that is critical to understanding the impact of policy design on the functionality of an effluent trading systems.

Comparison of municipal solid waste treatment technologies from a life cycle perspective in China.

PubMed

Dong, Jun; Chi, Yong; Zou, Daoan; Fu, Chao; Huang, Qunxing; Ni, Mingjiang

2014-01-01

China has endured the increasing generation of municipal solid waste; hence, environmental analysis of current waste management systems is of crucial importance. This article presents a comprehensive life cycle assessment of three waste treatment technologies practiced in Hangzhou, China: landfill with and without energy recovery, and incineration with waste-to-energy. Adopting region-specific data, the study covers various environmental impacts, such as global warming, acidification, nutrient enrichment, photochemical ozone formation, human toxicity and ecotoxicity. The results show that energy recovery poses a positive effect in environmental savings. Environmental impacts decrease significantly in landfill with the utilization of biogas owing to combined effects by emission reduction and electricity generation. Incineration is preferable to landfill, but toxicity-related impacts also need to be improved. Furthermore, sensitivity analysis shows that the benefit of carbon sequestration will noticeably decrease global warming potential of both landfill scenarios. Gas collection efficiency is also a key parameter influencing the performance of landfill. Based on the results, improvement methods are proposed. Energy recovery is recommended both in landfill and incineration. For landfill, gas collection systems should be upgraded effectively; for incineration, great efforts should be made to reduce heavy metals and dioxin emissions.

Comparison of fish and macroinvertebrates as bioindicators of Neotropical streams.

PubMed

Ruaro, Renata; Gubiani, Éder André; Cunico, Almir Manoel; Moretto, Yara; Piana, Pitágoras Augusto

2016-01-01

The biomonitoring of aquatic ecosystems in developing countries faces several limitations, especially related to gathering resources. The present study aimed at comparing the responses of fish and benthic macroinvertebrates to environmental change, to identify which group best indicates the differences between reference and impacted streams in southern Brazil. We determined reference and impacted sites based on physical and chemical variables of the water. For the analysis and comparison of biological responses, we calculated 22 metrics and submitted them to a discriminant analysis. We selected from this analysis only six metrics, which showed that the two studied assemblages respond differently to environmental change. A larger number of metrics were selected for macroinvertebrates than for fish in the separate analysis. The metrics selected for macroinvertebrates in the pooled analysis (i.e., fish and macroinvertebrates together) were different from those selected in the separate analysis for macroinvertebrates alone. However, the metrics selected for fish in the pooled analysis were the same selected in the separate analysis for fish alone. The macroinvertebrate assemblage was more effective for distinguishing reference from impacted sites. We suggest the use of macroinvertebrates as bioindicators of Neotropical streams, especially in situations in which time and money are short.

Flow Synthesis of Silver Nanowires for Semitransparent Solar Cell Electrodes: A Life Cycle Perspective.

PubMed

Espinosa, Nieves; Søndergaard, Roar R; Jørgensen, Mikkel; Krebs, Frederik C

2016-04-21

Silver nanowires (AgNWs) were prepared on a 5 g scale using either the well-known batch synthesis following the polyol method or a new flow synthesis method. The AgNWs were employed as semitransparent electrode materials in organic photovoltaics and compared to traditional printed silver electrodes based on micron sized silver flakes using life cycle analysis and environmental impact analysis methods. The life cycle analysis of AgNWs confirms that they provide an avenue to low-impact semitransparent electrodes. We find that the benefit of AgNWs in terms of embodied energy is less pronounced than generally assumed but that the toxicological and environmental benefits are significant. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Critical Evaluation of Waste Incineration Plants in Wuhan (China) Based on Site Selection, Environmental Influence, Public Health and Public Participation

PubMed Central

Hu, Hui; Li, Xiang; Nguyen, Anh Dung; Kavan, Philip

2015-01-01

With the rapid development of the waste incineration industry in China, top priority has been given to the problem of pollution caused by waste incineration. This study is the first attempt to assess all the waste incineration plants in Wuhan, the only national key city in central China, in terms of environmental impact, site selection, public health and public participation. By using a multi-criterion assessment model for economic, social, public health and environmental effects, this study indicates these incineration plants are established without much consideration of the local residents’ health and environment. A location analysis is also applied and some influences of waste incineration plants are illustrated. This study further introduces a signaling game model to prove that public participation is a necessary condition for improving the environmental impact assessment and increasing total welfare of different interest groups in China. This study finally offers some corresponding recommendations for improving the environmental impact assessments of waste incineration projects. PMID:26184242

A Critical Evaluation of Waste Incineration Plants in Wuhan (China) Based on Site Selection, Environmental Influence, Public Health and Public Participation.

PubMed

Hu, Hui; Li, Xiang; Nguyen, Anh Dung; Kavan, Philip

2015-07-08

With the rapid development of the waste incineration industry in China, top priority has been given to the problem of pollution caused by waste incineration. This study is the first attempt to assess all the waste incineration plants in Wuhan, the only national key city in central China, in terms of environmental impact, site selection, public health and public participation. By using a multi-criterion assessment model for economic, social, public health and environmental effects, this study indicates these incineration plants are established without much consideration of the local residents' health and environment. A location analysis is also applied and some influences of waste incineration plants are illustrated. This study further introduces a signaling game model to prove that public participation is a necessary condition for improving the environmental impact assessment and increasing total welfare of different interest groups in China. This study finally offers some corresponding recommendations for improving the environmental impact assessments of waste incineration projects.

Sustainable development of deep-water seaport: the case of Lithuania.

PubMed

Burskyte, Vilma; Belous, Olga; Stasiskiene, Zaneta

2011-06-01

In 2003, the Japan International Cooperation Agency carried out a development feasibility study of Klaipeda Seaport (Lithuania). The focus in this study was the evaluation of environmental impacts of the port expansion because it is located in an ecologically sensitive area. While the Japanese researchers focused on the environmental impact analysis, they did not provide unambiguous conclusions. The problems remained unresolved and required further, more detailed consideration and deeper analysis. Environmental sustainability in seaports is an issue of timely importance in many countries given the rapid increase in port-to-port traffic and harbor capacity. This paper explores the situation in Klaipeda Seaport (Lithuania) which is the northernmost ice-free port on the Eastern coast of the Baltic Sea and its challenges in terms of environmental aspects and current pollution situation. This port plays an important role in the economic development of the region and in creating a sustainable society, i.e., a society that continues to develop economically without increasing its impact on our living environment and where the possible reduction of its current impact can be huge due to the fact that the seaport is a place where transport and logistics intersect and constitute large-scale industrial estates. Increasingly, they also turn towards sustainability. Society faces the need for radical change because of increasing technological progress and increasing environmental impact. Environmental and public issues must be addressed by a systemic approach to find harmony among all the subsystems. Therefore, the authors of the article performed an assessment of the deep-water port of Klaipeda sustainable development opportunities tackling the following tasks: (1) Assessing Klaipeda port and the projected deep-water port of the current environment state; (2) Assessing the impact of the water quality of Klaipeda port, depending on the intensity of activity; (3) Assessing the projected impact of the deep-water port on the environment. The results of the performed research allowed: (a) to reveal strengths and weaknesses of Klaipeda port development and the potential conflicts of interest among different stakeholders, (b) to identify the set of problem solutions seeking sustainable Klaipeda port development; (c) to develop the set of sustainability indicators to monitor the efficiency of the development.

Decreasing the overall environmental impact of the Dutch diet: how to find healthy and sustainable diets with limited changes.

PubMed

Kramer, Gerard Fh; Tyszler, Marcelo; Veer, Pieter Van't; Blonk, Hans

2017-06-01

To find diets optimised on nutrition and environmental impact close to the current Dutch diet and to identify the most effective and acceptable options for mitigating environmental impact. Linear programming was used to optimise diets of Dutch men and women aged 9-69 years, divided into ten age-gender groups. The analysis included nutrient composition, a metric for popularity and life cycle assessments of 207 food products. Greenhouse gas emissions, fossil energy use and land occupation were used to calculate a weighted score for the overall environmental impact. Optimised diets were solutions that minimised changes to the current diet while satisfying all nutritional constraints, with stepwise reductions in environmental impact. The Netherlands. Dutch children and adults aged 9-69 years. Meat was always reduced. Vegetable, fruit and dairy contents remained similar, while bread, fatty fish and legumes increased. The extent of changes depended on age and gender. Beverages were not heavily reduced. Nutrients critical for the outcome were α-linoleic acid, retinol, Ca, Na, Se, dietary fibre, SFA, thiamin and Fe (women of childbearing age). Total protein, essential amino acids and carbohydrates were not critical. Reducing meat is the most effective option for lowering the environmental impact of diets in all age-gender groups. Reducing alcoholic and non-alcoholic beverages is another option. Leaving out fish and dairy products are not. The differences in nutritional requirements related to age and gender have a significant effect on the composition of the optimised diets.

Production cost analysis and use of pesticides in the transgenic and conventional corn crop [Zea mays (L.)] in the valley of San Juan, Tolima.

PubMed

Méndez, Kelly Avila; Chaparro Giraldo, Alejandro; Moreno, Giovanni Reyes; Castro, Carlos Silva

2011-01-01

A survey of 10 producers of conventional corn (Hybrids PAC 105 and Maximus) and 10 producers of transgenic corn (Pioneer Hybrid 30T17) was carried out in the municipality of Valle de San Juan in the territorial division of Tolima (Colombia), in order to analyze the differences in production costs and environmental impacts of these two agricultural technologies.  The environmental impacts were determined by calculating the field "Environmental Index Quotient" (EIQ). In the production cost analysis, a difference of 15% was found in benefit of the transgenic technology. The structure of costs of the transgenic technology was benefited by the reduced use of pesticides (insecticides and herbicides). In regards to production, the transgenic technology showed a greater yield, 5.22 ton/ha in comparison to 4.25 ton/ha the conventional technology, thus a 22% difference in yield. Finally, the EIQ calculation showed quantitative differences of 196.12 for the conventional technology (EIQ insecticides 165.14 + EIQ herbicides 30.98), while the transgenic technology was of 4.24 (EIQ insecticides 0 + EIQ herbicides 4.24). These results show a minor environmental impact when using the transgenic technology in comparison to the conventional technology, in regards to the use of insecticides and herbicides in a temporal, spatial and genotypical context analysis. :

Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services.

PubMed

Gilioli, G; Schrader, G; Baker, R H A; Ceglarska, E; Kertész, V K; Lövei, G; Navajas, M; Rossi, V; Tramontini, S; van Lenteren, J C

2014-01-15

The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose. By including both the structural and functional components of the environment threatened by invasive alien species (IAS), in particular plant pests, we propose an environmental risk assessment scheme that addresses this complexity. Structural components are investigated by evaluating the impacts of the plant pest on genetic, species and landscape diversity. Functional components are evaluated by estimating how plant pests modify ecosystem services in order to determine the extent to which an IAS changes the functional traits that influence ecosystem services. A scenario study at a defined spatial and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive citrus long-horn beetle, Anoplophora chinensis. © 2013.

Use of satellite imagery as environmental impact assessment tool: a case study from the NW Egyptian Red Sea coastal zone.

PubMed

Moufaddal, Wahid M

2005-08-01

Knowledge and detecting impacts of human activities on the coastal ecosystem is an essential management requirement and also very important for future and proper planning of coastal areas. Moreover, documentation of these impacts can help in increasing public awareness about side effects of unsustainable practices. Analysis of multidate remote sensing data can be used as an effective tool in environmental impact assessment (EIA). Being synoptic and frequent in coverage, multidate data from Landsat and other satellites provide a reference record and bird's eye viewing to the environmental situation of the coastal ecosystem and the associated habitats. Furthermore, integration of satellite data with field observations and background information can help in decision if a certain activity has caused deterioration to a specific habitat or not. The present paper is an attempt to utilize remote sensing data for assessment impacts of some human activities on the major sensitive habitats of the NW Egyptian Red Sea coastal zone, definitely between Ras Gemsha and Safaga. Through multidate change analysis of Landsat data (TM & ETM+ sensors), it was possible to depict some of the human infringements in the area and to provide, in some cases, exclusive evidences for the damaging effect of some developmental activities.

Albany case study : indirect land use and growth impacts

DOT National Transportation Integrated Search

1999-02-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System (GIS) and aerial photo...

Albany case study : indirect land use and growth impacts.

DOT National Transportation Integrated Search

1999-02-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System and aerial photos, gro...

Bend case study : indirect land use and growth impacts.

DOT National Transportation Integrated Search

2000-01-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System and aerial photos, gro...

The combination of an Environmental Management System and Life Cycle Assessment at the territorial level

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazzi, Anna; Toniolo, Sara; Catto, Stella

A framework to include a Life Cycle Assessment in the significance evaluation of the environmental aspects of an Environmental Management System has been studied for some industrial sectors, but there is a literature gap at the territorial level, where the indirect impact assessment is crucial. To overcome this criticality, our research proposes the Life Cycle Assessment as a framework to assess environmental aspects of public administration within an Environmental Management System applied at the territorial level. This research is structured in two parts: the design of a new methodological framework and the pilot application for an Italian municipality. The methodologicalmore » framework designed supports Initial Environmental Analysis at the territorial level thanks to the results derived from the impact assessment phase. The pilot application in an Italian municipality EMAS registered demonstrates the applicability of the framework and its effectiveness in evaluating the environmental impact assessment for direct and indirect aspects. Through the discussion of the results, we underline the growing knowledge derived by this research in terms of the reproducibility and consistency of the criteria to define the significance of the direct and indirect environmental aspects for a local public administration. - Highlights: • The combination between Environmental Management System and LCA is studied. • A methodological framework is elaborated and tested at the territorial level. • Life Cycle Impact Assessment supports the evaluation of aspects significance. • The framework assures consistency of evaluation criteria on the studied territory.« less

Environmental Impact Analysis Process. Draft Environmental Impact Statement Proposed Alaskan Radar System Over-the-Horizon Backscatter Radar Program

DTIC Science & Technology

1986-08-01

recreation and tourism facili- ties will lead to gradual growth; however, it will require another major construction project such as the Trans-Alaska...using the recreation attractions and from the government agencies manag- ing resources. The recreation and tourism activity is seasonal, in contrast to...from recreation and tourism . Quantitative employment data for the communities of Tok, Tanacross, and Tetlin are sketchy, but one can assume that the

Environmental Impact Analysis Process. Volume 3. Preliminary Final Environmental Impact Statement Construction and Operation of Space Launch Complex 7

DTIC Science & Technology

1989-10-23

817) 824-5606. Reelfoot Lake Water Level believes that the proposed timber EIS No. 890197. Final, USA. UT, Tooele Management Plan. Implementation...2: Incidenial lake erit The potential need for an incidental take permit is discussed in Section 4.4.1, Regional Environment. Comment No. 3...and Crow Indian Tribes. Yellowstone, E02, Lake Catamount ResortAvailability Big Horn and Rosebud Counties, MT, Construction. Special Use Permit

Environmental Impact Analysis Process, Final Environmental Assessment for U.S. Air Force Quick Reaction Launch Vehicle Program

DTIC Science & Technology

2001-01-22

fin whale (Balaenoptera physalis ), minke whale (B. acutorostrata), humpback whale (Megaptera novaeangliae), harbor seal (Phoca vitulina), Dall’s...modification of feeding habitat, 4) physical impacts due to launch failure, and 5) ingestion of toxins . A previous biological assessment (ENRI, 1998...Ingestion of toxins : Off Kodiak, eiders feed by diving and dabbling for mollusks and crustaceans in the shallow water. If, in the event of a launch

Finding of No Significant Impact and Environmental Assessment for Flight Test to the Edge of Space

DTIC Science & Technology

2008-12-01

Regulations [CFR] 1500–1508); 32 CFR Part 989, Environmental Impact Analysis Process; and National Aeronautics and Space Administration ( NASA ) policy and...agency. NASA Dryden Flight Research Center is a cooperating agency in the preparation of this EA. This programmatic EA serves as the foundation for... NASA installation or from any spaceport, or they could be air-launched from a carrier aircraft. Under Alternative B, high-speed vehicle flights would

Assessing cumulative impacts within state environmental review frameworks in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma Zhao, E-mail: zma@nrc.umass.ed; Becker, Dennis R., E-mail: drbecker@umn.ed; Kilgore, Michael A., E-mail: mkilgore@umn.ed

Cumulative impact assessment (CIA) is the process of systematically assessing a proposed action's cumulative environmental effects in the context of past, present, and future actions, regardless of who undertakes such actions. Previous studies have examined CIA efforts at the federal level but little is known about how states assess the cumulative impacts of nonfederal projects. By examining state environmental review statutes, administrative rules, agency-prepared materials, and a national survey of the administrators of state environmental review programs, this study identifies the legal and administrative frameworks for CIA. It examines current CIA practice, discusses the relationship between CIA policy and itsmore » implementation, and explores the opportunities for improvement. The results of the study show that twenty-nine state environmental review programs across twenty-six states required the assessment of cumulative environmental impacts. More than half of these programs have adopted specific procedures for implementing their policies. Some programs assessed cumulative impacts using a standard review document, and others have created their own documentations incorporated into applications for state permits or funding. The majority of programs have adopted various scales, baselines, significance criteria, and coordination practices in their CIA processes. Mixed methods were generally used for data collection and analysis; qualitative methods were more prevalent than quantitative methods. The results also suggest that a program with comprehensive and consistent environmental review policies and procedures does not always imply extensive CIA requirements and practices. Finally, this study discusses the potential for improving existing CIA processes and promoting CIA efforts in states without established environmental review programs.« less

Amount of water needed to save 1 m3 of water: life cycle assessment of a flow regulator

NASA Astrophysics Data System (ADS)

Berger, Markus; Söchtig, Michael; Weis, Christoph; Finkbeiner, Matthias

2017-06-01

Water saving devices in the sanitary equipment, such as flow regulators, are assumed to be environmentally advantageous even though their environmental benefit has never been compared to the environmental burden caused during their production und disposal. Therefore, a life cycle assessment according to ISO 14044 has been conducted to identify and quantify the environmental effects throughout the lifespan of a flow regulator. The analysis comprises the production of materials, manufacturing of components at suppliers, the assembly at NEOPERL®, all transports, savings of water and thermal energy during use as well as waste incineration including energy recovery in the end-of-life stage. Results show that the production of one flow regulator causes 0.12 MJ primary energy demand, a global warming potential of 5.9 g CO2-equivalent, and a water consumption of 30.3 ml. On the other hand, during a use of 10 years, it saves 19,231 MJ primary energy, 1223 kg CO2-equivalent, and avoids a water consumption of 790 l (166,200 l water use). Since local impacts of water consumption are more relevant than volumes, consequences of water consumption have been analyzed using recently developed impact assessment models. Accordingly, the production of a flow regulator causes 8.5 ml freshwater depletion, 1.4 × 10-13 disability adjusted life years, and 4.8 × 10-6 potentially disappeared fractions of species m2 a. Even though avoided environmental impacts resulting from water savings highly depend on the region where the flow regulator is used, the analysis has shown that environmental benefits are at least 15,000 times higher than impacts caused during the production.

The environmental impact of fertilizer embodied in a wheat-to-bread supply chain.

PubMed

Goucher, Liam; Bruce, Richard; Cameron, Duncan D; Lenny Koh, S C; Horton, Peter

2017-03-01

Food production and consumption cause approximately one-third of total greenhouse gas emissions 1-3 , and therefore delivering food security challenges not only the capacity of our agricultural system, but also its environmental sustainability 4-7 . Knowing where and at what level environmental impacts occur within particular food supply chains is necessary if farmers, agri-food industries and consumers are to share responsibility to mitigate these impacts 7,8 . Here we present an analysis of a complete supply chain for a staple of the global diet, a loaf of bread. We obtained primary data for all the processes involved in the farming, production and transport systems that lead to the manufacture of a particular brand of 800 g loaf. The data were analysed using an advanced life cycle assessment (LCA) tool 9 , yielding metrics of environmental impact, including greenhouse gas emissions. We show that more than half of the environmental impact of producing the loaf of bread arises directly from wheat cultivation, with the use of ammonium nitrate fertilizer alone accounting for around 40%. These findings reveal the dependency of bread production on the unsustainable use of fertilizer and illustrate the detail needed if the actors in the supply chain are to assume shared responsibility for achieving sustainable food production.

Polyatomic interferences on high precision uranium isotope ratio measurements by MC-ICP-MS: Applications to environmental sampling for nuclear safeguards

DOE PAGES

Pollington, Anthony D.; Kinman, William S.; Hanson, Susan K.; ...

2015-09-04

Modern mass spectrometry and separation techniques have made measurement of major uranium isotope ratios a routine task; however accurate and precise measurement of the minor uranium isotopes remains a challenge as sample size decreases. One particular challenge is the presence of isobaric interferences and their impact on the accuracy of minor isotope 234U and 236U measurements. Furthermore, we present techniques used for routine U isotopic analysis of environmental nuclear safeguards samples and evaluate polyatomic interferences that negatively impact accuracy as well as methods to mitigate their impacts.

Environmental Impact Analysis Process. Environmental Assessment for NAVSTAR Global Positioning System, Block IIR, and Medium Launch Vehicle III, Cape Canaveral Air Station, Florida

DTIC Science & Technology

1994-11-01

59 10 Solid Rocket Motor Combustion Products ...60 11 Core Vehicle First Stage Combustion Products ......................................................60 12 Health Hazard...Qualities of Hazardous Launch Emissions......................................61 13 Atlas II Combustion Products

Early Environmental Field Research Career Exploration: An Analysis of Impacts on Precollege Apprentices

ERIC Educational Resources Information Center

Flowers, Susan K.; Beyer, Katherine M.; Pérez, Maria; Jeffe, Donna B.

2016-01-01

Research apprenticeships offer opportunities for deep understanding of scientific practice, transparency about research careers, and possible transformational effects on precollege youth. We examined two consecutive field-based environmental biology apprenticeship programs designed to deliver realistic career exploration and connections to…

ENVIRONMENTAL ANALYSIS OF GASOLINE BLENDING COMPONENTS THROUGH THEIR LIFE CYCLE

EPA Science Inventory

The purpose of this study is to access the contribution of the three major gasoline blending components to the potential environmental impacts (PEI), which are the reformate, alkylate and cracked gasoline. This study accounts for losses of the gasoline blending components due to...

ENVIRONMENTAL ANALYSIS OF GASOLINE BLENDING COMPONENTS THROUGH THEIR LIFE CYCLE

EPA Science Inventory

The purpose of this study is to assess the contribution of the three major gasoline blending components to the potential environmental impacts (PEI), which are the reformate, alkylate and cracked gasoline. This study accounts for losses of the gasoline blending components due to ...

32 CFR 989.24 - Public notification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.24 Public notification. (a) Except as provided in § 989.26... limit local notification to the SPOC, local government representatives, and local news media. For all...

32 CFR 989.24 - Public notification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.24 Public notification. (a) Except as provided in § 989.26... limit local notification to the SPOC, local government representatives, and local news media. For all...

32 CFR 989.24 - Public notification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.24 Public notification. (a) Except as provided in § 989.26... limit local notification to the SPOC, local government representatives, and local news media. For all...

32 CFR 989.24 - Public notification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.24 Public notification. (a) Except as provided in § 989.26... limit local notification to the SPOC, local government representatives, and local news media. For all...

32 CFR 989.24 - Public notification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.24 Public notification. (a) Except as provided in § 989.26... limit local notification to the SPOC, local government representatives, and local news media. For all...

Public Interest or Private Agenda? A Meditation on the Role of NGOs in Environmental Policy and Management in Australia

ERIC Educational Resources Information Center

Lane, Marcus B.; Morrison, T. H.

2006-01-01

Non-government organisations (NGOs) have come to assume an important role in environmental policy in Australia. This paper considers the institutional impacts of an enlarged and formal role for NGOs in environmental governance. To foreground the analysis that follows, the paper theorises: (i) the structural democratisation of western societies…

32 CFR Appendix - Figures 4 through 8 to Subpart F of Part 651

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Figures 4 through 8 to Subpart F of Part 651 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement Existing EISs. Pt. 651, Subpt. F, Figs. Figures 4 through 8 to...

Needs and challenges for assessing the environmental impacts of engineered nanomaterials (ENMs)

PubMed Central

Romero-Franco, Michelle; Godwin, Hilary A; Bilal, Muhammad

2017-01-01

The potential environmental impact of nanomaterials is a critical concern and the ability to assess these potential impacts is top priority for the progress of sustainable nanotechnology. Risk assessment tools are needed to enable decision makers to rapidly assess the potential risks that may be imposed by engineered nanomaterials (ENMs), particularly when confronted by the reality of limited hazard or exposure data. In this review, we examine a range of available risk assessment frameworks considering the contexts in which different stakeholders may need to assess the potential environmental impacts of ENMs. Assessment frameworks and tools that are suitable for the different decision analysis scenarios are then identified. In addition, we identify the gaps that currently exist between the needs of decision makers, for a range of decision scenarios, and the abilities of present frameworks and tools to meet those needs. PMID:28546894

75 FR 59323 - Early Scoping for the Alternatives Analysis of the North Corridor Transit Project in Metropolitan...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... impacts and benefits to be considered, the capital and operating costs, the financial plans and other... evaluating the costs, benefits, and impacts of a range of transportation alternatives designed to address... maintenance costing, and environmental and land use analyses. Finally, costs, benefits, and impacts of each...

Toward a Methodology for Conducting Social Impact Assessments Using Quality of Social Life Indicators.

ERIC Educational Resources Information Center

Olsen, Marvin E.; Merwin, Donna J.

Broadly conceived, social impacts refer to all changes in the structure and functioning of patterned social ordering that occur in conjunction with an environmental, technological, or social innovation or alteration. Departing from the usual cost-benefit analysis approach, a new methodology proposes conducting social impact assessment grounded in…

Evaluation of environmental impact produced by different economic activities with the global pollution index.

PubMed

Zaharia, Carmen

2012-07-01

The paper analyses the environment pollution state in different case studies of economic activities (i.e. co-generation electric and thermal power production, iron profile manufacturing, cement processing, waste landfilling, and wood furniture manufacturing), evaluating mainly the environmental cumulative impacts (e.g. cumulative impact against the health of the environment and different life forms). The status of the environment (air, water resources, soil, and noise) is analysed with respect to discharges such as gaseous discharges in the air, final effluents discharged in natural receiving basins or sewerage system, and discharges onto the soil together with the principal pollutants expressed by different environmental indicators corresponding to each specific productive activity. The alternative methodology of global pollution index (I (GP)*) for quantification of environmental impacts is applied. Environmental data analysis permits the identification of potential impact, prediction of significant impact, and evaluation of cumulative impact on a commensurate scale by evaluation scores (ES(i)) for discharge quality, and global effect to the environment pollution state by calculation of the global pollution index (I (GP)*). The I (GP)* values for each productive unit (i.e. 1.664-2.414) correspond to an 'environment modified by industrial/economic activity within admissible limits, having potential of generating discomfort effects'. The evaluation results are significant in view of future development of each productive unit and sustain the economic production in terms of environment protection with respect to a preventive environment protection scheme and continuous measures of pollution control.

Analysis of the environmental behavior of farmers for non-point source pollution control and management in a water source protection area in China.

PubMed

Wang, Yandong; Yang, Jun; Liang, Jiping; Qiang, Yanfang; Fang, Shanqi; Gao, Minxue; Fan, Xiaoyu; Yang, Gaihe; Zhang, Baowen; Feng, Yongzhong

2018-08-15

The environmental behavior of farmers plays an important role in exploring the causes of non-point source pollution and taking scientific control and management measures. Based on the theory of planned behavior (TPB), the present study investigated the environmental behavior of farmers in the Water Source Area of the Middle Route of the South-to-North Water Diversion Project in China. Results showed that TPB could explain farmers' environmental behavior (SMC=0.26) and intention (SMC=0.36) well. Furthermore, the farmers' attitude towards behavior (AB), subjective norm (SN), and perceived behavioral control (PBC) positively and significantly influenced their environmental intention; their environmental intention further impacted their behavior. SN was proved to be the main key factor indirectly influencing the farmers' environmental behavior, while PBC had no significant and direct effect. Moreover, environmental knowledge following as a moderator, gender and age was used as control variables to conduct the environmental knowledge on TPB construct moderated mediation analysis. It demonstrated that gender had a significant controlling effect on environmental behavior; that is, males engage in more environmentally friendly behaviors. However, age showed a significant negative controlling effect on pro-environmental intention and an opposite effect on pro-environmental behavior. In addition, environmental knowledge could negatively moderate the relationship between PBC and environmental intention. PBC had a greater impact on the environmental intention of farmers with poor environmental knowledge, compared to those with plenty environmental knowledge. Altogether, the present study could provide a theoretical basis for non-point source pollution control and management. Copyright © 2018 Elsevier B.V. All rights reserved.

Environmental Impacts of Future Urban Deployment of Electric Vehicles: Assessment Framework and Case Study of Copenhagen for 2016-2030.

PubMed

Bohnes, Florence A; Gregg, Jay S; Laurent, Alexis

2017-12-05

To move toward environmentally sustainable transport systems, electric vehicles (EVs) are increasingly seen as viable alternatives to internal combustion vehicles (ICVs). To ensure effectiveness of such deployment, holistic assessments of environmental impacts can help decision-makers determine optimized urban strategies in a long-term perspective. However, explicit guidance and conduct of such assessments are currently missing. Here, we therefore propose a framework using life cycle assessment that enables the quantification of environmental impacts of a transport system at full urban scale from a fleet-based, foresight perspective. The analysis of the passenger car fleet development in the city of Copenhagen for the years 2016-2030 is used as a proof-of-concept. We modeled and compared five powertrain technologies, and we assessed four fleet-based scenarios for the entire city. Our results showed relative environmental benefits from range-extended and fuel-cell EVs over ICVs and standard EVs. These results were found to be sensitive to local settings, like electricity grid mix, which could alter the relative environmental performances across EV technologies. The comprehensive framework developed here can be applied to other geographic areas and contexts to assess the environmental sustainability of transport systems.

Identifying/Quantifying Environmental Trade-offs Inherent in GHG Reduction Strategies for Coal-Fired Power.

PubMed

Schivley, Greg; Ingwersen, Wesley W; Marriott, Joe; Hawkins, Troy R; Skone, Timothy J

2015-07-07

Improvements to coal power plant technology and the cofired combustion of biomass promise direct greenhouse gas (GHG) reductions for existing coal-fired power plants. Questions remain as to what the reduction potentials are from a life cycle perspective and if it will result in unintended increases in impacts to air and water quality and human health. This study provides a unique analysis of the potential environmental impact reductions from upgrading existing subcritical pulverized coal power plants to increase their efficiency, improving environmental controls, cofiring biomass, and exporting steam for industrial use. The climate impacts are examined in both a traditional-100 year GWP-method and a time series analysis that accounts for emission and uptake timing over the life of the power plant. Compared to fleet average pulverized bed boilers (33% efficiency), we find that circulating fluidized bed boilers (39% efficiency) may provide GHG reductions of about 13% when using 100% coal and reductions of about 20-37% when cofiring with 30% biomass. Additional greenhouse gas reductions from combined heat and power are minimal if the steam coproduct displaces steam from an efficient natural gas boiler. These upgrades and cofiring biomass can also reduce other life cycle impacts, although there may be increased impacts to water quality (eutrophication) when using biomass from an intensely cultivated source. Climate change impacts are sensitive to the timing of emissions and carbon sequestration as well as the time horizon over which impacts are considered, particularly for long growth woody biomass.

Environmental cost-benefit analysis of ultra low sulfur jet fuel.

DOT National Transportation Integrated Search

2011-12-01

Aircraft emissions can reduce air quality, leading to adverse health impacts including : increased risk of premature mortality. A technically viable way to mitigate the health : impacts of aviation is the use of desulfurized jet fuel, as has been don...

Bend case study : indirect land use and growth impacts : interim report

DOT National Transportation Integrated Search

2000-01-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System and aerial photos, gro...

McMinnville case study : indirect land use and growth impacts : interim report

DOT National Transportation Integrated Search

1999-12-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed : the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System and : aerial photos,...

Environmental impact assessment of the industrial estate development plan with the geographical information system and matrix methods.

PubMed

Ghasemian, Mohammad; Poursafa, Parinaz; Amin, Mohammad Mehdi; Ziarati, Mohammad; Ghoddousi, Hamid; Momeni, Seyyed Alireza; Rezaei, Amir Hossein

2012-01-01

The purpose of this study is environmental impact assessment of the industrial estate development planning. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. The net score for impact of industrial units operation on air quality of the project area was (-3). According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (-2). Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37). Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application.

Environmental review of Potomac Electric Power Company's proposed Station H Element I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-04-01

The report has been conducted to evaluate the potential impacts to environmental and cultural resources from the proposed construction and operation of Element I (the combustion turbine portion) of the Station H power plant facility at Potomac Electric Power Company's Dickerson site. This review also presents an evaluation of air quality impacts of Elements I and II (combustion turbine and combined cycle components of the facility) and an assessment of compliance with state and Federal air quality regulations (primarily the ambient air quality standards and the air quality impact requirements of PSD regulations). Results of the Environmental Review analysis aremore » used as the basis for establishing preliminary recommended licensing conditions for operating the proposed facility. These recommendations are also included in the report.« less

32 CFR 989.38 - Requirements for analysis abroad.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Requirements for analysis abroad. 989.38 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.38 Requirements for analysis abroad. (a) The EPF will generally perform the same functions for analysis of actions abroad that it performs in the...

32 CFR 989.38 - Requirements for analysis abroad.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Requirements for analysis abroad. 989.38 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.38 Requirements for analysis abroad. (a) The EPF will generally perform the same functions for analysis of actions abroad that it performs in the...

32 CFR 989.38 - Requirements for analysis abroad.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Requirements for analysis abroad. 989.38 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.38 Requirements for analysis abroad. (a) The EPF will generally perform the same functions for analysis of actions abroad that it performs in the...

32 CFR 989.38 - Requirements for analysis abroad.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Requirements for analysis abroad. 989.38 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.38 Requirements for analysis abroad. (a) The EPF will generally perform the same functions for analysis of actions abroad that it performs in the...

32 CFR 989.38 - Requirements for analysis abroad.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Requirements for analysis abroad. 989.38 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.38 Requirements for analysis abroad. (a) The EPF will generally perform the same functions for analysis of actions abroad that it performs in the...

Physical Outdoor Activity versus Indoor Activity: Their Influence on Environmental Behaviors

PubMed Central

Fang, Wei-Ta; Ng, Eric; Chang, Mei-Chuan

2017-01-01

There are strong evidences linking physical outdoor activity and health benefits; however, little is known about the impact on environmental behaviors. Thus, this study aims to close this gap by investigating the influence of physical outdoor activity on environmental behaviors. A total of 416 surveys were distributed to students in eight public primary schools located near the Hsinchu Science and Industrial Park in Taiwan. Findings from the analysis revealed that subjective norms had a more influential effect on environmental behaviors for participants who engaged in physical activity at outdoor parks. In contrast, descriptive norms had a direct predictive impact on environmental behaviors for participants whose main physical activity venue was at the indoor after-school centers. Research results also highlighted attitude as the strongest predictive variable influence on environmental behaviors for children who engaged in physical indoor and outdoor activities. PMID:28714934

Standardized input for Hanford environmental impact statements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Napier, B.A.

1981-05-01

Models and computer programs for simulating the environmental behavior of radionuclides in the environment and the resulting radiation dose to humans have been developed over the years by the Environmental Analysis Section staff, Ecological Sciences Department at the Pacific Northwest Laboratory (PNL). Methodologies have evolved for calculating raidation doses from many exposure pathways for any type of release mechanism. Depending on the situation or process being simulated, different sets of computer programs, assumptions, and modeling techniques must be used. This report is a compilation of recommended computer programs and necessary input information for use in calculating doses to members ofmore » the general public for environmental impact statements prepared for DOE activities to be conducted on or near the Hanford Reservation.« less

Passage Key Inlet, Florida; CMS Modeling and Borrow Site Impact Analysis

DTIC Science & Technology

2016-06-01

Impact Analysis by Kelly R. Legault and Sirisha Rayaprolu PURPOSE: This Coastal and Hydraulics Engineering Technical Note (CHETN) describes the...use of a nested Coastal Modeling System (CMS) model for Passage Key Inlet, which is one of the connections between the Gulf of Mexico and Tampa Bay...driven sediment transport at Passage Key Inlet. This analysis resulted in issuing a new Florida Department of Environmental Protection (FDEP) permit to

The environmental footprint of a membrane bioreactor treatment process through Life Cycle Analysis.

PubMed

Ioannou-Ttofa, L; Foteinis, S; Chatzisymeon, E; Fatta-Kassinos, D

2016-10-15

This study includes an environmental analysis of a membrane bioreactor (MBR), the objective being to quantitatively define the inventory of the resources consumed and estimate the emissions produced during its construction, operation and end-of-life deconstruction. The environmental analysis was done by the life cycle assessment (LCA) methodology, in order to establish with a broad perspective and in a rigorous and objective way the environmental footprint and the main environmental hotspots of the examined technology. Raw materials, equipment, transportation, energy use, as well as air- and waterborne emissions were quantified using as a functional unit, 1m(3) of urban wastewater. SimaPro 8.0.3.14 was used as the LCA analysis tool, and two impact assessment methods, i.e. IPCC 2013 version 1.00 and ReCiPe version 1.10, were employed. The main environmental hotspots of the MBR pilot unit were identified to be the following: (i) the energy demand, which is by far the most crucial parameter that affects the sustainability of the whole process, and (ii) the material of the membrane units. Overall, the MBR technology was found to be a sustainable solution for urban wastewater treatment, with the construction phase having a minimal environmental impact, compared to the operational phase. Moreover, several alternative scenarios and areas of potential improvement, such as the diversification of the electricity mix and the material of the membrane units, were examined, in order to minimize as much as possible the overall environmental footprint of this MBR system. It was shown that the energy mix can significantly affect the overall sustainability of the MBR pilot unit (i.e. up to 95% reduction of the total greenhouse gas emissions was achieved with the use of an environmentally friendly energy mix), and the contribution of the construction and operational phase to the overall environmental footprint of the system. Copyright © 2016 Elsevier B.V. All rights reserved.

Application of an uncertainty analysis approach to strategic environmental assessment for urban planning.

PubMed

Liu, Yi; Chen, Jining; He, Weiqi; Tong, Qingyuan; Li, Wangfeng

2010-04-15

Urban planning has been widely applied as a regulatory measure to guide a city's construction and management. It represents official expectations on future population and economic growth and land use over the urban area. No doubt, significant variations often occur between planning schemes and actual development; in particular in China, the world's largest developing country experiencing rapid urbanization and industrialization. This in turn leads to difficulty in estimating the environmental consequences of the urban plan. Aiming to quantitatively analyze the uncertain environmental impacts of the urban plan's implementation, this article developed an integrated methodology combining a scenario analysis approach and a stochastic simulation technique for strategic environmental assessment (SEA). Based on industrial development scenarios, Monte Carlo sampling is applied to generate all possibilities of the spatial distribution of newly emerged industries. All related environmental consequences can be further estimated given the industrial distributions as input to environmental quality models. By applying a HSY algorithm, environmentally unacceptable urban growth, regarding both economic development and land use spatial layout, can be systematically identified, providing valuable information to urban planners and decision makers. A case study in Dalian Municipality, Northeast China, is used to illustrate applicability of this methodology. The impacts of Urban Development Plan for Dalian Municipality (2003-2020) (UDP) on atmospheric environment are also discussed in this article.

Exergy: its potential and limitations in environmental science and technology.

PubMed

Dewulf, Jo; Van Langenhove, Herman; Muys, Bart; Bruers, Stijn; Bakshi, Bhavik R; Grubb, Geoffrey F; Paulus, D M; Sciubba, Enrico

2008-04-01

New technologies, either renewables-based or not, are confronted with both economic and technical constraints. Their development takes advantage of considering the basic laws of economics and thermodynamics. With respect to the latter, the exergy concept pops up. Although its fundamentals, that is, the Second Law of Thermodynamics, were already established in the 1800s, it is only in the last years that the exergy concept has gained a more widespread interest in process analysis, typically employed to identify inefficiencies. However, exergy analysis today is implemented far beyond technical analysis; it is also employed in environmental, (thermo)economic, and even sustainability analysis of industrial systems. Because natural ecosystems are also subjected to the basic laws of thermodynamics, it is another subject of exergy analysis. After an introduction on the concept itself, this review focuses on the potential and limitations of the exergy conceptin (1) ecosystem analysis, utilized to describe maximum storage and maximum dissipation of energy flows (2); industrial system analysis: from single process analysis to complete process chain analysis (3); (thermo)economic analysis, with extended exergy accounting; and (4) environmental impact assessment throughout the whole life cycle with quantification of the resource intake and emission effects. Apart from technical system analysis, it proves that exergy as a tool in environmental impact analysis may be the most mature field of application, particularly with respect to resource and efficiency accounting, one of the major challenges in the development of sustainable technology. Far less mature is the exergy analysis of natural ecosystems and the coupling with economic analysis, where a lively debate is presently going on about the actual merits of an exergy-based approach.

Decision: Earth.

ERIC Educational Resources Information Center

Procter and Gamble Educational Services, Cincinnati, OH.

This Proctor and Gamble produced and teacher developed environmental education unit is designed to teach seventh through ninth grade students about making informed consumer product choices. The unit focuses on the concept of consumer product life cycle analysis, an approach to assessing the environmental impacts of a product at each stage in its…

Environmental Impact Analysis Process, Environmental Assessment Space Test Experiments Platform Mission 1, Vandenberg Air Force Base, CA

DTIC Science & Technology

1994-01-05

Information LOCAL AGENCIES Santa Barbara County Air Pollution Control District, California Hallerman , Richard Air Quality Specialist City of...Base. Provided by Richard Hallerman , SBCAPCD, to Bob Baxter, Engineering-Science. 11 June. ____, 1991. Santa Barbara County Air Pollution Control

Scenario and multiple criteria decision analysis for energy and environmental security of military and industrial installations.

PubMed

Karvetski, Christopher W; Lambert, James H; Linkov, Igor

2011-04-01

Military and industrial facilities need secure and reliable power generation. Grid outages can result in cascading infrastructure failures as well as security breaches and should be avoided. Adding redundancy and increasing reliability can require additional environmental, financial, logistical, and other considerations and resources. Uncertain scenarios consisting of emergent environmental conditions, regulatory changes, growth of regional energy demands, and other concerns result in further complications. Decisions on selecting energy alternatives are made on an ad hoc basis. The present work integrates scenario analysis and multiple criteria decision analysis (MCDA) to identify combinations of impactful emergent conditions and to perform a preliminary benefits analysis of energy and environmental security investments for industrial and military installations. Application of a traditional MCDA approach would require significant stakeholder elicitations under multiple uncertain scenarios. The approach proposed in this study develops and iteratively adjusts a scoring function for investment alternatives to find the scenarios with the most significant impacts on installation security. A robust prioritization of investment alternatives can be achieved by integrating stakeholder preferences and focusing modeling and decision-analytical tools on a few key emergent conditions and scenarios. The approach is described and demonstrated for a campus of several dozen interconnected industrial buildings within a major installation. Copyright © 2010 SETAC.

Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

NASA Astrophysics Data System (ADS)

Kittipongvises, Suthirat

2017-11-01

Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, `resources' and `climate change' categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

Disaster incubation, cumulative impacts and the urban/ex-urban/rural dynamic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mulvihill, Peter R.; Ali, S. Harris

2007-05-15

This article explores environmental impacts and risks that can accumulate in rural and ex-urban areas and regions and their relation to urban and global development forces. Two Southern Ontario cases are examined: an area level water disaster and cumulative change at the regional level. The role of disaster incubation analysis and advanced environmental assessment tools are discussed in terms of their potential to contribute to more enlightened and effective assessment and planning processes. It is concluded that conventional approaches to EA and planning are characteristically deficient in addressing the full range of impacts and risks, and particularly those originating frommore » pathogens, dispersed and insidious sources. Rigorous application of disaster incubation analysis and more advanced forms of EA has considerable potential to influence a different pattern of planning and decision making.« less

The economic and environmental cost of delayed GM crop adoption: The case of Australia's GM canola moratorium.

PubMed

Biden, Scott; Smyth, Stuart J; Hudson, David

2018-01-02

Incorporating socio-economic considerations (SECs) into national biosafety regulations regarding genetically modified (GM) crops have opportunity costs. Australia approved the cultivation of GM canola through a science-based risk assessment in 2003, but allowed state moratoria to be instituted based on potential trade impacts over the period 2004 to 2008 and 2010 in the main canola growing states. This analysis constructs a counterfactual assessment using Canadian GM canola adoption data to create an S-Curve of adoption in Australia to measure the environmental and economic opportunity costs of Australia's SEC-based moratoria between 2004 and 2014. The environmental impacts are measured through the amount of chemical active ingredients applied during pest management, the Environmental Impact Quotient indicator, and greenhouse gas emissions. The economic impacts are measured through the variable costs of the weed control programs, yield and the contribution margin. The environmental opportunity costs from delaying the adoption of GM canola in Australia include an additional 6.5 million kilograms of active ingredients applied to canola land; a 14.3% increase in environmental impact to farmers, consumers and the ecology; 8.7 million litres of diesel fuel burned; and an additional 24.2 million kilograms of greenhouse gas (GHG) and compound emissions released. The economic opportunity costs of the SEC-based moratoria resulted in foregone output of 1.1 million metric tonnes of canola and a net economic loss to canola farmers' of AU$485.6 million. The paper provides some of the first quantified, post-adoption evidence on the opportunity cost and environmental impacts of incorporating SECs into GM crop regulation.

The assessment of aesthetic and perceptual aspects within environmental impact assessment of renewable energy projects in Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolli, Michela, E-mail: michela.tolli@uniroma1.it; Recanatesi, Fabio, E-mail: fabio.rec@unitus.it; Piccinno, Matteo

The main aim of this paper is to explore how perceptual and aesthetic impact analyses are considered in Environmental Impact Assessment (EIA), with specific reference to Italian renewable energy projects. To investigate this topic, the paper starts by establishing which factors are linked with perceptual and aesthetic impacts and why it is important to analyze these aspects, which are also related to legislative provisions and procedures in Europe and in Italy. In particular the paper refers to renewable energy projects because environmental policies are encouraging more and more investment in this kind of primary resource. The growing interest in thismore » type of energy is leading to the realization of projects which change the governance of territories, with inevitable effects on the landscape from the aesthetic and perceptual points of view. Legislative references to EIA, including the latest directive regarding this topic show the importance of integrating the assessment of environmental and perceptual impacts, thus there is a need to improve EIA methodological approaches to this purpose. This paper proposes a profile of aesthetic and perceptual impact analysis in EIA for renewable energy projects in Italy, and concludes with recommendations as to how this kind of analysis could be improved. - Highlights: • We analyze 29 EIA Reports of Italian renewable energy projects. • We examine esthetic and perceptual aspects present in Italian EIA reports. • We identified inconsistency in use of methods for esthetic and perceptual aspects. • Local populations are rarely included as stakeholders in EIAs. • A shared understanding of perceptual and esthetic issues in EIA proceedings is required.« less

Risk-based economic decision analysis of remediation options at a PCE-contaminated site.

PubMed

Lemming, Gitte; Friis-Hansen, Peter; Bjerg, Poul L

2010-05-01

Remediation methods for contaminated sites cover a wide range of technical solutions with different remedial efficiencies and costs. Additionally, they may vary in their secondary impacts on the environment i.e. the potential impacts generated due to emissions and resource use caused by the remediation activities. More attention is increasingly being given to these secondary environmental impacts when evaluating remediation options. This paper presents a methodology for an integrated economic decision analysis which combines assessments of remediation costs, health risk costs and potential environmental costs. The health risks costs are associated with the residual contamination left at the site and its migration to groundwater used for drinking water. A probabilistic exposure model using first- and second-order reliability methods (FORM/SORM) is used to estimate the contaminant concentrations at a downstream groundwater well. Potential environmental impacts on the local, regional and global scales due to the site remediation activities are evaluated using life cycle assessments (LCA). The potential impacts on health and environment are converted to monetary units using a simplified cost model. A case study based upon the developed methodology is presented in which the following remediation scenarios are analyzed and compared: (a) no action, (b) excavation and off-site treatment of soil, (c) soil vapor extraction and (d) thermally enhanced soil vapor extraction by electrical heating of the soil. Ultimately, the developed methodology facilitates societal cost estimations of remediation scenarios which can be used for internal ranking of the analyzed options. Despite the inherent uncertainties of placing a value on health and environmental impacts, the presented methodology is believed to be valuable in supporting decisions on remedial interventions. Copyright 2010 Elsevier Ltd. All rights reserved.

Environmental Impact Analysis Process. Final Environmental Impact Statement for Proposed Air Force Reserve Mission Change (C-130 to C-5A Aircraft) and Westover Metropolitan Development Corporation. (Expansion of Civil Aviation Operations through 1995) at Westover Air Force Base, Massachusetts April 1987. Volume 2

DTIC Science & Technology

1987-04-01

ommunity . To enable *MC to approriately develop Westover Metropolitan Airport, the corporation commissioned an Airport Master Plan in 198 which vas...use by us. Richard Rust, who I listened to Sunday on television, Director of Tourism in Massachusetts, stated that it, tourism , is the second largest

Environmental Impact Analysis Process. Final Environmental Impact Statement. Supersonic Flight Operations in the Reserve Military Operations Area, Holloman, New Mexico

DTIC Science & Technology

1983-01-01

SUPERSONIC FLIGHT OPERATIONS ’• I • IN THE RESERVE MILITARY OPERATIONS AREA . HOLLOMAN AFB, NE MEXICO ~~DEPARTMENT OF THE AIR FORCE I Environme nta IImpac...Force (b) Proposed Action: Supersonic Flight Operations in the Reserve Mill ary Operations Area in Catron County, New Mexico . (c) Responsible...Abstract: The 49th Tactical Fighter Wing (TFW) at Holloman AFB, New Mexico , proposes to fly approximately 200 supersonic sorties per month in the Reserve

The comparative analysis of payments for negative environmental impact in Russia and Kazakhstan

NASA Astrophysics Data System (ADS)

Tsibulnikova, M. R.; Ospanov, A. T.; Salata, D. V.; Strelnikova, A. B.

2015-11-01

The article represents the calculation of the payment for negative environmental impact caused by the development of the uranium ores deposits in the Republic of Kazakhstan. To compare the deposits in Kazakhstan and the Russian Federation, the event is simulated as if the object were located in the territory of the Russian Federation. The comparison of the results serves as an evidence to substantiate the experts’ claim that the financial mechanism of land management in Russia should be reformed.

Environmental Impact Analysis Process. Environmental Impact Statement Proposed Sites Central Radar System Over-the-Horizon Backscatter Radar Program

DTIC Science & Technology

1990-08-01

laying in beds or layers 3 Subspecies A geographical or ecological subdivision of a species Switch reflectors Passive antennas that will reflect CRS...that provide ecological and economic benefits. They furnish water and habitat for waterfowl and other wildlife and water for crops and livestock...ridge areas of I glacial Lake Agassiz, which were preferred for various reasons such as the ecological diversity or the ability to survey lower ground

Environmental Impact Analysis Process. Preliminary Draft Environmental Impact Statement. Construction and Operation of Space Launch Complex 7. Volume 2. Appendices.

DTIC Science & Technology

1989-03-15

non -point source pollution managementprograms, and implement controls to improve water quality. Controls should be implemented for any project...Businesses or other for- Vandenberg AFB, and the launching of on the proposed information collection profit, non -profit institutions Ithe Titan Centaur. In...communications. The Titan Centaur launch vehicle is a modified Titan 34D designed to deliver a payload of up to U 32,000 pounds directly into polar orbit from VAFB

Environmental Impact Analysis Process. Environmental Impact Statement Space Shuttle Program Vandenberg AFB, California

DTIC Science & Technology

1978-01-01

Coastal Commission University of California, Irvine 1540 Market Street Department of Ecology and Evolutionary San Francisco, CA 94102 Biology FROM...Category... 4-5 4.2-3 North County I3ffbase Land Requirements for Projected Development to 1990 ............... 4-ti ..-1 Special Interest Plants to be...c•iacb•ii, and concrete batch plants . CONSTRULiCTIdh Je•v-. *1p rotitttr•,y 1.4 x 116 si ft hb 0I-ich thick Istisii rlIouy or?,’ ifaIt Ant ntilltd

Environmental Impact Analysis Process. Environmental Impact Statement for the Closure of Pease Air Force Base. Volume 1

DTIC Science & Technology

1990-05-01

initially known as Portsmouth AFB. In 1957, it was rededicated as Pease AFB in honor of Captain Harl Pease, Jr., a native of Plymouth , Now Hampshire. During... barren soil, up-gradient from storm drains, or in close proximity of floor drains. Corrective action currently being taken is the prompt disposal of...Plant communities on base are indicative of the pine / northern hardwood ecosystem.. The forest resources of. Pease AFB are substantial. More than one

Environmental Impact Analysis Process. Draft Environmental Impact Statement Proposed Central Radar System Over-the-Horizon Backscatter Radar Program

DTIC Science & Technology

1986-08-01

demand for food crops and high crop yields in the region, drew a great influx of people. North Dakota and South Dakota were admitted to the Union in 1889...aircraft costs approximately $135 million. The cost to purchase, man, base, and operate the large number of aircraft required to match the proposed OTH-B...identified. Possible sites of historical significance indicated by Tweton (1978) are the Tara Settlement Post Office, the Rugby Post Office, and the

Environmental Impact Analysis Process. Preliminary Draft Environmental Impact Statement Construction and Operation of Space Launch Complex 7. Volume 2. Appendices

DTIC Science & Technology

1988-11-15

3 Sincerely, William H. Ehorn3Suerintenent United States Department of the Interior FISH AND WILDLIFE SERVICE LAGUNA NIGUEL FIELD OFFICE 24000 Avila...Road Laguna Niguel, California 92656 Ma’ 19, 1988 Department of the Air Force Headquarters Space Division (AFSC) Los Angeles Air Force Station P. 0...agricultural supply, and ground water recharge. In addition, all minor streams and tributaries in the central coastal region, including Honda Creek and Jalama

Environmental Impact Analysis Process. Final Environmental Impact Statement for Expansion of the Melrose Air Force Range, Curry and Roosevelt Counties, New Mexico

DTIC Science & Technology

1985-04-18

discuss very briefly the logic, or substance, of the issues in this possible decision--why it might not be logical. And, third, the moral , or ethical...o’f the issue - authors advocating measurable effect and those indicating no effect. 38 CHABA has taken the position that current evidence is suggestive...but it does not provide definitive answers on the long-term health effect issue . CHABA encourages more definitive research with adequate controls

Efficacy and efficiency of Agri-environmental payments in impacts of crops' management

NASA Astrophysics Data System (ADS)

Blasi, Emanuele; Martella, Angelo; Passeri, Nicolo; Ghini, Paolo

2015-04-01

Since the 90s, in Europe the Common Agricultural Policy (CAP) started to activate measures for improving the sustainability of European agriculture, these measures were systematized in 2000 with the tools of rural development, pursuing a synergistic environmental action trough the agri-environmental payments. Since their definition, those payments were designed to ensure the protection, maintenance and enhancement of natural resources (water, soil, forests), biodiversity (species and habitat), and landscape. In particular initiatives as set aside, afforestation, organic agriculture, integrated pest management, low input and precision agriculture have enriched the agricultural management practices. The aim of this work is to check the trend between agro-environmental subsidies and environmental performance (based on Ecological Indicators and CO2 evaluation) at country level in EU, in order to study the regulatory framework impact in addressing the European cropping system towards sustainability. In particular soils and their land use can storage CO2 as pool and so provide environmental services and, on the other hand the agricultural practices can stimulate the emission and the environmental footprint. Impacts (so called emissions/footprints and storage/environmental services) will be compared with the Agri-environmental Payments for calculating performances due to environmental management practices, supported by political initiatives. Such analysis sustains the European policy makers towards more suitable agricultural policies and in particular it can address national sustainability through agricultural practices.

Strategic environmental assessment in China: motivations, politics, and effectiveness.

PubMed

Zhu, Da; Ru, Jiang

2008-09-01

This paper examines how strategic environmental assessment has been practiced at the national level in China through 2005 and why it has been practiced in the manner observed. Based on literature reviews and interviews carried out in 2005 and 2006, we find that bureaucratic politics between environmental and nonenvironmental ministries has limited the legislation and implementation of strategic environmental assessment to environmental assessment (EA) for a set of government plans defined in the 2003 Environmental Impact Assessment Law. Interviewees from environmental and nonenvironmental ministries and key research institutes have reported that few planning EAs have been performed at the sectoral level. Nonenvironmental ministries have either evaded the 2003 Environmental Impact Assessment Law and have not undertaken required planning EA or have organized planning EA on their own without participation by the State Environmental Protection Administration. The rising tension between the environmental and nonenvironmental ministries has limited the role of planning EA as a participatory decision-making tool. In addition to bureaucratic politics, we find that weak public participation and underemphasis on social analysis in planning EA may have further compromised the utility of planning EA.

Grants Pass case study : indirect land use and growth impacts : interim report

DOT National Transportation Integrated Search

1999-08-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System and aerial photos, gro...

Corvallis case study : indirect land use and growth impacts of highway improvements.

DOT National Transportation Integrated Search

2001-06-01

To improve environmental analysis of indirect land use impacts of highway capacity improvements, this study analyzed the land use and growth patterns of 20 Oregon communities over 20 years. Using a Geographic Information System and aerial photos, gro...

78 FR 54906 - Draft Supplemental Environmental Impact Report/Environmental Impact Statement for a Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

...-FF08ECAR00] Draft Supplemental Environmental Impact Report/Environmental Impact Statement for a Proposed... Conservation Commission (CVCC), has prepared a joint draft Supplemental Environmental Impact Report/Environmental Impact Statement (draft Supplemental EIR/EIS) under the National Environmental Policy Act (NEPA...

Environmental management zoning for coal mining in mainland China based on ecological and resources conditions.

PubMed

Geng, Haiqing; Chen, Fan; Wang, Zhiyuan; Liu, Jie; Xu, Weihua

2017-05-01

The purpose of this research is to establish an environmental management zoning for coal mining industry which is served as a basis for making environmental management policies. Based on the specific impacts of coal mining and regional characteristics of environment and resources, the ecological impact, water resources impact, and arable land impact are chose as the zoning indexes to construct the index system. The ecological sensitivity is graded into three levels of low, medium, and high according to analytical hierarchy processes and gray fixed weight clustering analysis, and the water resources sensitivity is divided into five levels of lower, low, medium, high, and higher according to the weighted sum of sub-indexes, while only the arable land sensitive zone was extracted on the basis of the ratio of arable land to the county or city. By combining the ecological sensitivity zoning and the water resources sensitive zoning and then overlapping the arable-sensitive areas, the mainland China is classified into six types of environmental management zones for coal mining except to the forbidden exploitation areas.

Trash track--active location sensing for evaluating e-waste transportation.

PubMed

Offenhuber, Dietmar; Wolf, Malima I; Ratti, Carlo

2013-02-01

Waste and recycling systems are complex and far-reaching, but its mechanisms are poorly understood by the public, in some cases government organizations and even the waste management sector itself. The lack of empirical data makes it challenging to assess the environmental impact of trash collection, removal and disposal. This is especially the case for the global movement of electronic wastes. Senseable City Lab's Trash Track project tackles this scarcity of data by following the trajectories of individual objects. The project presents a methodology involving active location sensors that were placed on end-of-life products donated by volunteers in the Seattle, Washington area. These tags sent location messages chronicling their journey, some over the course of a month or more. In this paper, the authors focus on the analysis of traces acquired from 146 items of electronic waste, estimating evaluating the environmental impact, including the travel distances and end-of-life treatments for the products. Combining this information with impact evaluation from the US Environmental Protection Agency's Waste Reduction Model (WARM) allows for the creation of environmental impact profiles for individual pieces of trash.

A dynamic agent-based analysis for the environmental impacts of conventional and novel book retailing.

PubMed

Xu, Ming; Allenby, Braden; Kim, Junbeum; Kahhat, Ramzy

2009-04-15

The dynamics of an e-commerce market and the associated environmental impacts from a bottom-up perspective using an agent-based model is explored. A conceptual meta-theory from psychology is adopted to form the behavioral rules of artificial consumers choosing different methods of buying a book, including conventional bookstores, e-commerce, and a proposed self-pick-up option. Given the energy and emissions savings that result from a shift to e-commerce from bookstore purchase, it appears that reductions in environmental impacts are relatively probable. Additionally, our results suggest that the shift to e-commerce is mainly due to the growth of Internet users, which ties energy and emissions savings to Internet penetration. Moreover, under any scenario, the energy and emissions savings will be provided by the introduction of the proposed self-pick-up option. Our model thus provides insights into market behaviors and related environmental impacts of the growing use of e-commerce systems at the retail level, and provides a basis for the development and implementation of more sustainable policies and practices.

A modified cost benefit analysis of coastal development (tourism) with special reference to Longbay Beach--Negril, Jamaica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinds, P.W.; Ngandu, M.

The purpose of this study is to estimate the cost and benefits of the Tourist Industry in Negril over the period 1970-93, including its impact on the environment. Traditional cost benefit analysis will be used with appropriate modifications. The Long Bay stretch has been an area of rapid expansion over the last ten to twenty years. This expansion has rapidly outgrown infrastructure development and this, the potential environmental problems are already showing up in marine pollution and other forms of environmental degradation. Although there is numerous evidence of environmental impacts on tourism, there has not been a lot of workmore » done on quantifying these impacts, and policy makers have not been ensuring that these externalities are internalized by these hotels, in an effort to make them better stewards of the environment. This study will not only look at the economic cost and benefit of the industry from the point of view of revenue and expenditure, but also the environment cost, benefit and policy recommendations necessary to accomplish this.« less

78 FR 36298 - Notice of Intent to Prepare an Environmental Impact Statement for the Federal Way Transit...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

..., and an alternatives analysis study. Early scoping notification for the alternatives analysis phase was... alternatives analysis findings, and other background technical reports are available on the project Web site... about the proposed [[Page 36299

EMERGY ANALYSIS AND ECONOMIC ANALYSIS A COMPARATIVE STUDY

EPA Science Inventory

Our mission at USEPA is to protect human health and safeguard the natural environment. We aim to base our environmental regulations and policies on sound scientific and, where appropriate, economic analyses. Although EPA has conducted analysis of the impact of regulations on ...

A quantitative and qualitative inquiry of the impact of a residential environmental education program on student learning

NASA Astrophysics Data System (ADS)

Oberst, Mary Claire

Quantitative and qualitative research methods were utilized in a two-phase design approach to describe the impact of a residential environmental education program on student learning and provide a profile of program participants. In phase one, within a nonequivalent pre-posttest control group design, fourth and fifth-grade students (N = 490) were administered learner-outcome-based instruments in terms of ecological knowledge and environmental attitude. The treatment group consisted of students who participated in the 4-6th grade level curriculum of the residential environmental education program at Cuyahoga Valley Environmental Education Center. A teacher survey was implemented to provide a profile of the teachers participating in the residential program with their students. Major findings indicate a statistically significant impact on student ecological knowledge (p ≤.05); no statistically significant impact on environmental attitude was found. Data collected from the teacher survey provided a profile of the contact teachers who participated in the study. Eighty-eight percent of these primarily fourth and fifth grade teachers teach science. The majority have a Master's Degree and all have had some coursework related to environmental education. Ninety-two percent have attended at least one workshop related to environmental education and seventy-five percent have attended up to five environmental education related workshops within the last five years. All of these teachers use environmental education techniques and content in the classroom and all report a high level of environmental concern. In the second phase of the study, a purposeful sample of students, teachers, and parents was interviewed; data were collected through program observation, interviews, and program document collection. Content analysis yielded the following patterns in regard to student, teacher, and parent perceptions of what students learned: (1) natural history; (2) environmental awareness; (3) environmental ethics; and environmental action. These patterns were consistent with overall program goals. This research has revealed curriculum impact on student learning. In terms of the quantity of student learning, findings indicate a statistically significant gain in student ecological knowledge. In terms of a portrait of student learning, the four patterns that emerged from the qualitative data revealed program impact associated with program goals as well as goals for environmental education.

Environmental Assessment of Remove Objects Along Flightline at Davis-Monthan Air Force Base, Arizona

DTIC Science & Technology

2005-08-01

of Defense DRMO Defense Reutilization and Marketing Office EA Environmental Assessment EIAP Environmental Impact Analysis Process EIS...the ADA to advertise that protected species might be available for salvage, facilitating the salvage process for the project area. 3.5 Hazardous...are stored at the Defense Reutilization and Marketing Office (DRMO). Asbestos. AFI 32-1052, Facilities Asbestos Management, provides direction for

Identification of High Performance, Low Environmental Impact Materials and Processes Using Systematic Substitution (SyS)

NASA Technical Reports Server (NTRS)

Dhooge, P. M.; Nimitz, J. S.

2001-01-01

Process analysis can identify opportunities for efficiency improvement including cost reduction, increased safety, improved quality, and decreased environmental impact. A thorough, systematic approach to materials and process selection is valuable in any analysis. New operations and facilities design offer the best opportunities for proactive cost reduction and environmental improvement, but existing operations and facilities can also benefit greatly. Materials and processes that have been used for many years may be sources of excessive resource use, waste generation, pollution, and cost burden that should be replaced. Operational and purchasing personnel may not recognize some materials and processes as problems. Reasons for materials or process replacement may include quality and efficiency improvements, excessive resource use and waste generation, materials and operational costs, safety (flammability or toxicity), pollution prevention, compatibility with new processes or materials, and new or anticipated regulations.

Comparative life cycle assessment and financial analysis of mixed culture polyhydroxyalkanoate production.

PubMed

Gurieff, Nicholas; Lant, Paul

2007-12-01

A life cycle assessment and financial analysis of mixed culture PHA (PHA(MC)) and biogas production was undertaken based on treating an industrial wastewater. Internal rate of return (IRR) and non-renewable CO(2)eq emissions were used to quantify financial viability and environmental impact. PHA(MC) was preferable to biogas production for treating the specified industrial effluent. PHA(MC) was also financially attractive in comparison to pure culture PHA production. Both PHA production processes had similar environmental impacts that were significantly lower than HDPE production. A large potential for optimisation exists for the PHA(MC) process as financial and environmental costs were primarily due to energy use for downstream processing. Under the conditions used in this work PHA(MC) was shown to be a viable biopolymer production process and an effective industrial wastewater treatment technology. This is the first study of its kind and provides valuable insight into the PHA(MC) process.

Deployment Area Selection and Land Withdrawal/Acquisition. M-X/MPS (M-X/Multiple Protective Shelter) Environmental Technical Report. Nye County, Nevada.

DTIC Science & Technology

1981-10-02

captures the environ- mental data and analysis in the document that was nearing com- pletion when the President decided to deploy the system in a...environmental technical " data from the Congress, federal agencies and the states involved, we have published limited copies of the document for their use...Land Withdrawal/Acquisition Environmental Impact Statement (FEIS) and its associated Environmental Technical Reports (ETRs). The data tables

The effectiveness of the mitigation hierarchy in environmental impact studies on marine ecosystems: A case study in France

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacob, Céline, E-mail: celine.jacob@cefe.cnrs.fr; CREOCEAN, Les Belvédères, Bâtiment B, 128, Avenue de Fès, 34080 Montpellier; Pioch, Sylvain, E-mail: sylvain.pioch@gmail.com

While the development of maritime economic activity is increasingly encouraged, the consideration of its impacts constitutes a real challenge. The limitations of the implementation of the mitigation hierarchy have been widely discussed in scientific literature, yet data on marine biodiversity offset practices remains scarce. In this study, we investigated the use of Environmental Impact Assessments (EIAs) as suitable instruments to achieve the No Net Loss objective. Drawing on a French approach developed for the initial assessment of the European Marine Strategy Framework Directive, we examined the pressures and impacts related to various marine development projects and the effectiveness of themore » mitigation hierarchy in limiting these. An analysis of 55 recent French environmental impact studies showed that only 7% of the proposed measures had the aim of offsetting predicted degradation of sites of remarkable biodiversity. This can be partly explained by the lack of a clear definition of ‘significant impact’, which varies greatly depending on what is impacted, in turn allowing socio-economic activities to benefit more easily from offset. Furthermore, offsetting does not always constitute the final step of the mitigation hierarchy, highlighting the need to reinforce avoidance and reduction steps. Although we acknowledge the role of EIA in mitigating the negative impacts of development projects, synergies with other European marine environmental policies such as the Marine Strategy Framework Directive (MSFD) and the Maritime Spatial Planning directive (MSP) should be developed in order to improve current practices. - Highlights: • Avoidance measures were not well represented in the Environmental Impact Assessments studied. • Few significant residual impacts and measures to offset these were described. • Common biodiversity did not benefit from offset measures. • The equivalency of proposed marine offsets is questionable.« less

Life Cycle Assessment to support the quantification of the environmental impacts of an event

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toniolo, Sara; Mazzi, Anna; Fedele, Andrea

In recent years, several tools have been used to define and quantify the environmental impacts associated with an event; however, a lack of uniform approaches for conducting environmental evaluations has been revealed. The aim of this paper is to evaluate whether the Life Cycle Assessment methodology, which is rarely applied to an event, can be an appropriate tool for calculating the environmental impacts associated with the assembly, disassembly, and use phase of an event analysing in particular the components and the displays used to establish the exhibits. The aim is also to include the issues reported by ISO 20121:2012 involvingmore » the interested parties that can be monitored but also affected by the event owner, namely the event organiser, the workforce and the supply chain. A small event held in Northern Italy was selected as the subject of the research. The results obtained show that the main contributors are energy consumption for lighting and heating and the use of aluminium materials, such as bars for supporting the spotlights, carpet and the electronic equipment. A sensitivity analysis for estimating the effects of the impact assessment method chosen has also been conducted and an uncertainty analysis has been performed using the Monte Carlo technique. This study highlighted the importance of the energy consumed by heating and lighting on the environmental implications, and indicated that the preparation and assembly should always be considered when quantifying the environmental profile of an event. - Highlights: • LCA methodology, developed for products and services, is applied to an event. • A small event held in Northern Italy is analysed. • The main contributors are energy consumption and the use of aluminium and carpet. • Exhibition site preparation can have important environmental implications. • This study demonstrates the importance of the assembly, disassembly and use phase.« less

Yield and environmental effects of organic and inorganic fertilizer applications on mixed-season perennial forages

USDA-ARS?s Scientific Manuscript database

Although primarily a research project, this study included a training component whereby undergraduate research assistants gained practical knowledge in plant, soil and soil-water sampling and analysis, and learned about the environmental impact of nutrient loading in ground and surface waters. The ...

76 FR 15888 - Special Regulations; Areas of the National Park System, Cape Cod National Seashore

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... the public of the regulatory change. The proposed rule follows an extensive environmental analysis... rule would implement the Cape Cod National Seashore Hunting Program Environmental Impact Statement of... posted without change to http://www.regulations.gov , including any personal information provided. For...

32 CFR 989.29 - Force structure and unit move proposals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Force structure and unit move proposals. 989.29 Section 989.29 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.29 Force structure and unit move...

32 CFR 989.21 - Record of decision (ROD).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Record of decision (ROD). 989.21 Section 989.21 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.21 Record of decision (ROD). (a) The proponent and the EPF...

32 CFR 989.11 - Combining EIAP with other documentation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... documentation. (a) The EPF combines environmental analysis with other related documentation when practicable (40 CFR 1506.4) following the procedures prescribed by the CEQ regulations and this part. (b) The EPF must... the EIAP. Prior to making a decision to proceed, the EPF must analyze the environmental impacts that...

32 CFR 989.2 - Concept.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Concept. 989.2 Section 989.2 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.2 Concept. (a) This part provides a framework on how to comply with NEPA and...

Light Rail Transit in Hamilton: Health, Environmental and Economic Impact Analysis

ERIC Educational Resources Information Center

Topalovic, P.; Carter, J.; Topalovic, M.; Krantzberg, G.

2012-01-01

Hamilton's historical roots as an electric, industrial and transportation-oriented city provide it with a high potential for rapid transit, especially when combined with its growing population, developing economy, redeveloping downtown core and its plans for sustainable growth. This paper explores the health, environmental, social and economic…

7 CFR Appendix E to Subpart E of... - Environmental Assessment Guidelines

Code of Federal Regulations, 2011 CFR

2011-01-01

... items and questions and contain as attachments the indicated descriptive materials, as well as the.... When necessary for descriptive purposes or environmental analysis, include land use maps or other.... Evaluate the impact on air quality given the types and amounts of projected emissions, the existing air...

7 CFR Appendix E to Subpart E of... - Environmental Assessment Guidelines

Code of Federal Regulations, 2014 CFR

2014-01-01

... items and questions and contain as attachments the indicated descriptive materials, as well as the.... When necessary for descriptive purposes or environmental analysis, include land use maps or other.... Evaluate the impact on air quality given the types and amounts of projected emissions, the existing air...

7 CFR Appendix E to Subpart E of... - Environmental Assessment Guidelines

Code of Federal Regulations, 2010 CFR

2010-01-01

... items and questions and contain as attachments the indicated descriptive materials, as well as the.... When necessary for descriptive purposes or environmental analysis, include land use maps or other.... Evaluate the impact on air quality given the types and amounts of projected emissions, the existing air...