Environmental aspects and renewable energy sources in the production of construction aggregate

NASA Astrophysics Data System (ADS)

Skrzypczak, Izabela; Kokoszka, Wanda; Buda-Ożóg, Lidia; Kogut, Janusz; Słowik, Marta

2017-11-01

The main activity of open pit mining of aggregates are aggregates' exploitation of natural mineral deposits and its modification in order to obtain high-quality aggregates. The development of aggregate production is conditioned by a number of factors. The most important are: documented material resources, mining and manufacturing capabilities, the need of environmental protection (environmental aspects), the subordination of the plan of spatial development, formal and legal issues, as well as economic and financial aspects. While identifying and assessing the environmental impacts of manufacturing aggregates one may distinguish those environmental aspects that have or may have the greatest magnitude of the impact on the environment as a result of industrial activities. Manufacturers producing aggregates located in the areas covered by the special environmental protection require extra diligence in the conduct of mining activities for preservation of natural resources. The article discusses some main environmental aspects of the production of construction aggregates on the example of one of the largest producers of this material in Subcarpathian province of Poland. Environmental protection in production of aggregates may refer to four aspects: the use of natural resources, having excluded land from agriculture and forestry, land reclamation after exploitation, and use of energy from renewable energy sources. The economic and environmental impact of production volume of aggregates is evaluated by the index information capacity method and the method of graphs.

Evaluation of environmental aspects significance in ISO 14001.

PubMed

Põder, Tõnis

2006-05-01

The methodological framework set by standards ISO 14001 and ISO 14004 gives only general principles for environmental aspects assessment, which is regarded as one of the most critical stages of implementing environmental management system. In Estonia, about 100 organizations have been certified to the ISO 14001. Experience obtained from numerous companies has demonstrated that limited transparency and reproducibility of the assessment process serves as a common shortcoming. Despite rather complicated assessment schemes sometimes used, the evaluation procedures have been largely based on subjective judgments because of ill-defined and inadequate assessment criteria. A comparison with some similar studies in other countries indicates a general nature of observed inconsistencies. The diversity of approaches to the aspects' assessment in concept literature and to the related problems has been discussed. The general structure of basic assessment criteria, compatible with environmental impact assessment and environmental risk analysis has also been outlined. Based on this general structure, the article presents a tiered approach to help organize the assessment in a more consistent manner.

Safety aspects of nuclear waste disposal in space

NASA Technical Reports Server (NTRS)

Rice, E. E.; Edgecombe, D. S.; Compton, P. R.

1981-01-01

Safety issues involved in the disposal of nuclear wastes in space as a complement to mined geologic repositories are examined as part of an assessment of the feasibility of nuclear waste disposal in space. General safety guidelines for space disposal developed in the areas of radiation exposure and shielding, containment, accident environments, criticality, post-accident recovery, monitoring systems and isolation are presented for a nuclear waste disposal in space mission employing conventional space technology such as the Space Shuttle. The current reference concept under consideration by NASA and DOE is then examined in detail, with attention given to the waste source and mix, the waste form, waste processing and payload fabrication, shipping casks and ground transport vehicles, launch site operations and facilities, Shuttle-derived launch vehicle, orbit transfer vehicle, orbital operations and space destination, and the system safety aspects of the concept are discussed for each component. It is pointed out that future work remains in the development of an improved basis for the safety guidelines and the determination of the possible benefits and costs of the space disposal option for nuclear wastes.

Space safety and rescue 1984-1985

NASA Astrophysics Data System (ADS)

Heath, G. W.

The present conference on spacecraft crew safety and rescue technologies and operations considers safety aspects of Space Shuttle ground processing, the Inmarsat and COSPAS/SARSAT emergency location satellite systems, emergency location and rescue communications using Geosat, the use of the Manned Maneuvering Unit for on-orbit rescue operations, NASA Space Station safety design and operational considerations, and the medico-legal implications of space station operation. Also discussed are the operational and environmental aspects of EPIRBS, mobile satellites for safety and disaster response, Inmarsat's role in the Future Global Maritime Distress and Safety System, and test results of the L-band satellite's EPIRB system.

Driving forces behind the Chinese public's demand for improved environmental safety.

PubMed

Wen, Ting; Wang, Jigan; Ma, Zongwei; Bi, Jun

2017-12-15

Over the past decades, the public demand for improved environmental safety keeps increasing in China. This study aims to assess the driving forces behind the increasing public demand for improved environmental safety using a provincial and multi-year (1995, 2000, 2005, 2010, and 2014) panel data and the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model. The potential driving forces investigated included population size, income levels, degrees of urbanization, and educational levels. Results show that population size and educational level are positively (P<0.01) associated with public demand for improved environmental safety. No significant impact on demand was found due to the degree of urbanization. For the impact due to income level, an inverted U-shaped curve effect with the turning point of ~140,000 CNY GDP per capita is indicated. Since per capita GDP of 2015 in China was approximately 50,000 CNY and far from the turning point, the public demand for improved environmental safety will continue rising in the near future. To meet the increasing public demand for improved environmental safety, proactive and risk prevention based environmental management systems coupled with effective environmental risk communication should be established. Copyright © 2017 Elsevier B.V. All rights reserved.

Medical Error Disclosure and Patient Safety: Legal Aspects

PubMed Central

Guillod, Olivier

2013-01-01

Reducing the number of preventable adverse events has become a public health issue. The paper discusses in which ways the law can contribute to that goal, especially by encouraging a culture of safety among healthcare professionals. It assesses the need or the usefulness to pass so-called disclosure laws and apology laws, to adopt mandatory but strictly confidential Critical Incidents Reporting Systems in hospitals, to change the fault-based system of medical liability or to amend the rules on criminal liability. The paper eventually calls for adding the law to the present agenda of patient safety. Significance for public health The extent of preventable adverse events and the correlative need to improve patient safety are recognized today as a public health issue. In order to lower the toll associated with preventable adverse events, the former culture of professionalism (based on the premise that a good physician doesn’t make mistakes) must be replaced by a culture of safety, which requires a multi-pronged approach that includes all the main stakeholders within the healthcare system. A number of legal reforms could help in prompting such a change. This contribution stresses the need to include legal aspects when trying to find appropriate responses to public health issues. PMID:25170502

Evolution from safety management system (SMS) to HSE MS: Incorporating health aspects into the HSE management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jong, G. de

1996-12-31

There is increasing recognition within the E&P industry that protection and promotion of the health of people at work is more than taking care of individual health. It is an organizational issue which can be managed using the same principles as for safety and environment. The synergy`s with safety and environmental management provide the link with the management system. However line managers need to under the critical Health issues: what are they are they relevant? How do we manage them? what are the standards? What are the management tools to be used? How do we monitor performance? What is themore » role of the line? What is the role of the health advisers? What training and competencies are needed for health management? What are the benefits? These questions have to be clarified before acceptance can be achieved for full integration of Health aspects into the HSE Management System. Health Risk Assessment was developed as a tool for systematic identification and assessment of health hazards and risks. It specifies the need for and type of controls and recovery measures, which can subsequently be incorporated in HSE Management System and HSE Cases. Our experience to date indicates that Health can successfully be integrated in HSE Management Systems and HSE Cases by using the same principles as developed for Safety Management Systems and Safety Cases. There are still many problems which need to be addressed but the methodology used appears to be sound and will eventually enhance line management understanding of the health management aspects relevant to the E&P Industry.« less

Nuclear Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, E G

This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

An aspect-oriented approach for designing safety-critical systems

NASA Astrophysics Data System (ADS)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

Space station internal environmental and safety concerns

NASA Technical Reports Server (NTRS)

Cole, Matthew B.

1987-01-01

Space station environmental and safety concerns, especially those involving fires, are discussed. Several types of space station modules and the particular hazards associated with each are briefly surveyed. A brief history of fire detection and suppression aboard spacecraft is given. Microgravity fire behavior, spacecraft fire detector systems, space station fire suppression equipment and procedures, and fire safety in hyperbaric chambers are discussed.

Historical aspects of immunization and vaccine safety communication.

PubMed

Helfert, Stephanie M

2015-01-01

It has been a long journey starting from the beginnings of variolation [3] leading up to the greatest success in the history of immunization: the eradication of smallpox [39]. Today, vaccines are an acknowledged important medical advance [40]. Nevertheless, immunization has been the subject of public controversy on several occasions [15, 24, 31]. This article shall provide a short overview of some aspects of the early stages of immunization in Western countries, including some examples of vaccine safety controversies in the past.

Environmental aspects of the transuranics: a selected, annotated bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fore, C.S.; Martin, F.M.; Faust, R.A.

This bibliography of 500 references is compiled from the Data Base on the Environmental Aspects of the Transuranics built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA`s Nevada Operations Office. The general scope is environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. Laboratory and field studies dealing with the effects of plutonium-239 on animals are highlighted in this bibliography. Supporting information on ecology of the Nevada Test Site and reviews on the effects of other radionuclides upon man and his environment has been included at the request of the NAEG. Themore » references are arranged by subject category with first authors appearing alphabetically in each category. Indexes are given for author, geographic location, keywords, taxons, permuted title and publication description.« less

United States import safety, environmental health, and food safety regulation in China.

PubMed

Nyambok, Edward O; Kastner, Justin J

2012-01-01

China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

A multi-objective optimization approach for the selection of working fluids of geothermal facilities: Economic, environmental and social aspects.

PubMed

Martínez-Gomez, Juan; Peña-Lamas, Javier; Martín, Mariano; Ponce-Ortega, José María

2017-12-01

The selection of the working fluid for Organic Rankine Cycles has traditionally been addressed from systematic heuristic methods, which perform a characterization and prior selection considering mainly one objective, thus avoiding a selection considering simultaneously the objectives related to sustainability and safety. The objective of this work is to propose a methodology for the optimal selection of the working fluid for Organic Rankine Cycles. The model is presented as a multi-objective approach, which simultaneously considers the economic, environmental and safety aspects. The economic objective function considers the profit obtained by selling the energy produced. Safety was evaluated in terms of individual risk for each of the components of the Organic Rankine Cycles and it was formulated as a function of the operating conditions and hazardous properties of each working fluid. The environmental function is based on carbon dioxide emissions, considering carbon dioxide mitigation, emission due to the use of cooling water as well emissions due material release. The methodology was applied to the case of geothermal facilities to select the optimal working fluid although it can be extended to waste heat recovery. The results show that the hydrocarbons represent better solutions, thus among a list of 24 working fluids, toluene is selected as the best fluid. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental safety & health requirements for a federal facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, G.; Wong, J.

1995-09-01

I would like to take this opportunity to discuss the challenges that face an environmental, safety, and health (ES&H) manager at a federal facility situated in California. The challenges are, in many aspects, similar to those facing ES&H professionals all over this country: dwindling resources and increasing regulatory demands. The Laboratory (LLNL) is under closer scrutiny than other R&D facilities located in California because some of its research activities involve nuclear weapon design. Today I would like to talk about two actions we, the ES&H management at LLNL, have taken to decrease the impact of dwindling resources and increasing regulatorymore » demands: (1) Institution of a performance-based contract, which the University of California negotiated with the Department of Energy (DOE) to reduce the impact of special mandates required of federal facilities. Under this contract, ES&H performance is measured by results rather than by process; (2) Redesign of the LLNL Hazards Control Department to a flat organization that incorporates employee empowerment and Self-Managed Work Teams (SMWTs).« less

Safety in passenger ships: The influence of environmental design characteristics on people's perception of safety.

PubMed

Ahola, Markus; Mugge, Ruth

2017-03-01

Although objective safety is a widely studied topic in ergonomics, subjective safety has received far less research attention. Nevertheless, most of human decision-making and behavior depends on how we perceive our environment. This study investigates the effects of various environmental design characteristics on people's safety perception in a passenger ship context. Five different environmental design characteristics were manipulated to increase the openness of the space or to create more clear navigation, resulting in 20 different cabin corridors for a passenger ship. Ninety-seven respondents were asked to rate these corridors on the perceived safety in an experiment. The results showed that people feel more safe when the corridors have a curved ceiling, when the walls do not have a split-level design, and when there is a view to the outside. Designers can use these insights when designing future environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biological preservation of plant derived animal feed with antifungal microorganisms: safety and formulation aspects.

PubMed

Melin, Petter; Sundh, Ingvar; Håkansson, Sebastian; Schnürer, Johan

2007-08-01

During storage of moist animal feed, growth of detrimental fungi causing spoilage, or being mycotoxigenic or pathogenic, is a severe problem. Addition of biopreservative yeasts or lactic acid bacteria can significantly reduce this problem. However, their use requires several careful considerations. One is the safety to the animal, humans and the environment, tightly connected to legal aspects and the need for pre-market authorisation when supplementing feed with microorganisms. Although both yeasts and lactic acid bacteria are considered comparatively safe organisms due to low production of toxic metabolites, it is of great importance to understand the mechanisms behind the biopreservative abilities. Another important issue concerns practical aspects, such as the economic production of large amounts of the organisms and the development of a suitable formulation giving the organisms a long shelf life. These aspects are discussed and a recommendation of this review is that both safety and formulation aspects of a specific microbe should be considered at an early stage in the selection of new organisms with biopreservation potential.

A review of technology and safety aspects of erbium lasers in dentistry.

PubMed

Clarkson, D M

2001-01-01

This article reviews aspects of the probable mechanisms used by erbium dental lasers for cutting dentine and enamel, describes key issues of the risk of temperature elevation and speed of cutting relative to conventional techniques and looks at issues concerned with the safety of lasers.

The Environmental Context of Patient Safety and Medical Errors

ERIC Educational Resources Information Center

Wholey, Douglas; Moscovice, Ira; Hietpas, Terry; Holtzman, Jeremy

2004-01-01

The environmental context of patient safety and medical errors was explored with specific interest in rural settings. Special attention was paid to unique features of rural health care organizations and their environment that relate to the patient safety issue and medical errors (including the distribution of patients, types of adverse events…

The Effect of Considering Environmental Aspect to Distribution Planning: A Case in Logistics SME

NASA Astrophysics Data System (ADS)

Prambudia, Yudha; Andrian Nur, Andri

2016-01-01

Environmental aspect is often neglected in traditional distribution planning process of a product. Especially in small-medium enterprises (SME) of developing countries where cost efficiency is the predominant factor. Bearing in mind that there is a large number of SME's performing logistics activities, the consideration of environmental aspect in their distribution planning process would be beneficial to climate change mitigation efforts. The purpose of this paper is to show the impact of environmental aspect should it be considered as a contributing factor in distribution planning. In this research, an adoption of CO2-emission factor in an SME's distribution planning in Indonesia was simulated. The outputs of distribution planning with and without the factor consideration are then compared. The result shows that adoption of CO2-emission factor would change the priority of delivery route.

The food and environmental safety of Bt crops.

PubMed

Koch, Michael S; Ward, Jason M; Levine, Steven L; Baum, James A; Vicini, John L; Hammond, Bruce G

2015-01-01

Bacillus thuringiensis (Bt) microbial pesticides have a 50-year history of safety in agriculture. Cry proteins are among the active insecticidal ingredients in these pesticides, and genes coding for Cry proteins have been introduced into agricultural crops using modern biotechnology. The Cry gene sequences are often modified to enable effective expression in planta and several Cry proteins have been modified to increase biological activity against the target pest(s). Additionally, the domains of different but structurally conserved Cry proteins can be combined to produce chimeric proteins with enhanced insecticidal properties. Environmental studies are performed and include invertebrates, mammals, and avian species. Mammalian studies used to support the food and feed safety assessment are also used to support the wild mammal assessment. In addition to the NTO assessment, the environmental assessment includes a comparative assessment between the Bt crop and the appropriate conventional control that is genetically similar but lacks the introduced trait to address unintended effects. Specific phenotypic, agronomic, and ecological characteristics are measured in the Bt crop and the conventional control to evaluate whether the introduction of the insect resistance has resulted in any changes that might cause ecological harm in terms of altered weed characteristics, susceptibility to pests, or adverse environmental impact. Additionally, environmental interaction data are collected in field experiments for Bt crop to evaluate potential adverse effects. Further to the agronomic and phenotypic evaluation, potential movement of transgenes from a genetically modified crop plants into wild relatives is assessed for a new pest resistance gene in a new crop. This review summarizes the evidence for safety of crops containing Cry proteins for humans, livestock, and other non-target organisms.

The food and environmental safety of Bt crops

PubMed Central

Koch, Michael S.; Ward, Jason M.; Levine, Steven L.; Baum, James A.; Vicini, John L.; Hammond, Bruce G.

2015-01-01

Bacillus thuringiensis (Bt) microbial pesticides have a 50-year history of safety in agriculture. Cry proteins are among the active insecticidal ingredients in these pesticides, and genes coding for Cry proteins have been introduced into agricultural crops using modern biotechnology. The Cry gene sequences are often modified to enable effective expression in planta and several Cry proteins have been modified to increase biological activity against the target pest(s). Additionally, the domains of different but structurally conserved Cry proteins can be combined to produce chimeric proteins with enhanced insecticidal properties. Environmental studies are performed and include invertebrates, mammals, and avian species. Mammalian studies used to support the food and feed safety assessment are also used to support the wild mammal assessment. In addition to the NTO assessment, the environmental assessment includes a comparative assessment between the Bt crop and the appropriate conventional control that is genetically similar but lacks the introduced trait to address unintended effects. Specific phenotypic, agronomic, and ecological characteristics are measured in the Bt crop and the conventional control to evaluate whether the introduction of the insect resistance has resulted in any changes that might cause ecological harm in terms of altered weed characteristics, susceptibility to pests, or adverse environmental impact. Additionally, environmental interaction data are collected in field experiments for Bt crop to evaluate potential adverse effects. Further to the agronomic and phenotypic evaluation, potential movement of transgenes from a genetically modified crop plants into wild relatives is assessed for a new pest resistance gene in a new crop. This review summarizes the evidence for safety of crops containing Cry proteins for humans, livestock, and other non-target organisms. PMID:25972882

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

Teaching the Ethical Aspects of Environmental Science

NASA Astrophysics Data System (ADS)

Palinkas, C. M.

2014-12-01

Environmental and societal issues are often inherently linked, especially in coastal and estuarine environments, and science and social values must often be balanced in ecosystem management and decision-making. A new seminar course has been developed for the Marine Estuarine and Environmental Science (MEES) graduate program, an inter-institutional program within the University System of Maryland, to examine these issues. This 1-credit course, offered for the first time in Spring 2015, takes a complex systems perspective on major environmental and societal challenges to examine these linked issues in a variety of contexts. After a brief introduction to the emerging field of "geoethics," students develop a list of issues to examine throughout the seminar. Example topics could include fracking, offshore wind technology, dam removal, and iron fertilization, among others. A case-study approach is taken, with each class meeting focusing on one issue. For each case study, students are asked to 1) identify relevant scientific principles and major knowledge gaps, 2) predict potential outcomes, 3) identify stakeholders and likely viewpoints, and 4) construct communication plans to disseminate findings to these stakeholders. At the end of the semester, students give a brief presentation of the ethical aspects of their own research topics.

30 CFR 285.800 - How must I conduct my activities to comply with safety and environmental requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental requirements? 285.800 Section 285.800 Mineral Resources MINERALS MANAGEMENT... OUTER CONTINENTAL SHELF Environmental and Safety Management, Inspections, and Facility Assessments for... safety and environmental requirements? (a) You must conduct all activities on your lease or grant under...

Factors Of Environmental Safety And Environmentally Efficient Technologies Transportation Facilities Gas Transportation Industry

NASA Astrophysics Data System (ADS)

Vasiliev, Bogdan U.

2017-01-01

The stable development of the European countries depends on a reliable and efficient operation of the gas transportation system (GTS). With high reliability of GTS it is necessary to ensure its industrial and environmental safety. In this article the major factors influencing on an industrial and ecological safety of GTS are analyzed, sources of GTS safety decreasing is revealed, measures for providing safety are proposed. The article shows that use of gas-turbine engines of gas-compressor units (GCU) results in the following phenomena: emissions of harmful substances in the atmosphere; pollution by toxic waste; harmful noise and vibration; thermal impact on environment; decrease in energy efficiency. It is shown that for the radical problem resolution of an industrial and ecological safety of gas-transmission system it is reasonable to use gas-compressor units driven by electric motors. Their advantages are shown. Perspective technologies of these units and experience of their use in Europe and the USA are given in this article.

Personal, situational and organizational aspects that influence the impact of patient safety incidents: A qualitative study.

PubMed

Van Gerven, E; Deweer, D; Scott, S D; Panella, M; Euwema, M; Sermeus, W; Vanhaecht, K

2016-07-01

When a patient safety incident (PSI) occurs, not only the patient, but also the involved health professional can suffer. This study focused on this so-called "second victim" of a patient safety incident and aimed to examine: (1) experienced symptoms in the aftermath of a patient safety incident; (2) applied coping strategies; (3) the received versus needed support and (4) the aspects that influenced whether one becomes a second victim. Thirty-one in-depth interviews were performed with physicians, nurses and midwives who have been involved in a patient safety incident. The symptoms were categorized under personal and professional impact. Both problem focused and emotion focused coping strategies were used in the aftermath of a PSI. Problem focused strategies such as performing a root cause analysis and the opportunity to learn from what happened were the most appreciated, but negative emotional responses such as repression and flight were common. Support from colleagues and supervisors who were involved in the same event, peer supporters or professional experts were the most needed. A few individuals described emotional support from the healthcare institution as unwanted. Rendered support was largely dependent on the organizational culture, a stigma remained among healthcare professionals to openly discuss patient safety incidents. Three aspects influenced the extent to which a healthcare professional became a second victim: personal, situational and organizational aspects. These findings indicated that a multifactorial approach including individual and emotional support to second victims is crucial. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Safety aspects of the production of foods and food ingredients from insects.

PubMed

Schlüter, Oliver; Rumpold, Birgit; Holzhauser, Thomas; Roth, Angelika; Vogel, Rudi F; Quasigroch, Walter; Vogel, Stephanie; Heinz, Volker; Jäger, Henry; Bandick, Nils; Kulling, Sabine; Knorr, Dietrich; Steinberg, Pablo; Engel, Karl-Heinz

2017-06-01

At present, insects are rarely used by the European food industry, but they are a subject of growing interest as an alternative source of raw materials. The risks associated with the use of insects in the production of foods and food ingredients have not been sufficiently investigated. There is a lack of scientifically based knowledge of insect processing to ensure food safety, especially when these processes are carried out on an industrial scale. This review focuses on the safety aspects that need to be considered regarding the fractionation of insects for the production of foods and food ingredients. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Coffee silverskin: characterization, possible uses, and safety aspects.

PubMed

Toschi, Tullia Gallina; Cardenia, Vladimiro; Bonaga, Giorgio; Mandrioli, Mara; Rodriguez-Estrada, Maria Teresa

2014-11-05

The reuse of coffee silverskin (CS), the main waste product of the coffee-roasting industry, could be an alternative to its environmental disposal. However, CS could also contain undesirable compounds, such as ochratoxin A (OTA) and phytosterol oxidation products (POPs). A study on the composition of CS (caffeine, moisture, dietary fibers, carbohydrates, and polyphenol contents) was carried out, with emphasis on OTA and POPs for safety reasons. The lipid fraction showed significant amounts of linoleic acid and phytosterols (7.0 and 12.1% of lipid fraction). Noticeable levels of POPs (114.11 mg/100 g CS) were found, and the phytosterol oxidation rate varied from 27.6 to 48.1%. The OTA content was 18.7-34.4 μg/kg CS, which is about 3 times higher than the European Commission limits for coffee products. The results suggest that CS could be used as a source of cellulose and/or bioactive compounds; however, the contents of POPs and OTA might represent a risk for human safety if intended for human or livestock use.

Human aspects of mission safety

NASA Technical Reports Server (NTRS)

Connors, Mary M.

1989-01-01

Recent discussions of psychology's involvement in spaceflight have emphasized its role in enhancing space living conditions and incresing crew productivity. While these goals are central to space missions, behavioral scientists should not lose sight of a more basic flight requirement - that of crew safety. This paper examines some of the processes employed in the American space program in support of crew safety and suggests that behavioral scientists could contribute to flight safety, both through these formal processes and through less formal methods. Various safety areas of relevance to behavioral scientists are discussed.

Institutional and environmental aspects of geothermal energy development

NASA Technical Reports Server (NTRS)

Citron, O. R.

1977-01-01

Until recently, the majority of work in geothermal energy development has been devoted to technical considerations of resource identification and extraction technologies. The increasing interest in exploiting the variety of geothermal resources has prompted an examination of the institutional barriers to their introduction for commercial use. A significant effort was undertaken by the Jet Propulsion Laboratory as a part of a national study to identify existing constraints to geothermal development and possible remedial actions. These aspects included legislative and legal parameters plus environmental, social, and economic considerations.

78 FR 50079 - Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... DEPARTMENT OF THE INTERIOR Bureau of Safety and Environmental Enforcement [Docket ID BSEE-2013-0005; OMB Control Number 1014-0017: 134E1700D2 EEEE500000 ET1SF0000.DAQ000] Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed Collection; Comment Request Correction In notice document 2013-19416 appearing o...

Linking Environmental Sustainability, Health, and Safety Data in Health Care: A Research Roadmap.

PubMed

Kaplan, Susan B; Forst, Linda

2017-08-01

Limited but growing evidence demonstrates that environmental sustainability in the health-care sector can improve worker and patient health and safety. Yet these connections are not appreciated or understood by decision makers in health-care organizations or oversight agencies. Several studies demonstrate improvements in quality of care, staff satisfaction, and work productivity related to environmental improvements in the health-care sector. A pilot study conducted by the authors found that already-collected data could be used to evaluate impacts of environmental sustainability initiatives on worker and patient health and safety, yet few hospitals do so. Future research should include a policy analysis of laws that could drive efforts to integrate these areas, elucidation of organizational models that promote sharing of environmental and health and safety data, and development of tools and methods to enable systematic linkage and evaluation of these data to expand the evidence base and improve the hospital environment.

Exploring the role of emotional intelligence in behavior-based safety coaching.

PubMed

Wiegand, Douglas M

2007-01-01

Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.

Environmental aspects of the transuranics. A selected, annotated bibliography. Volume 9

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ensminger, J.T.; Fore, C.S.; Dailey, N.S.

This ninth published bibliography of 589 references is compiled from the Nevada Applied Ecology Information Center`s Data Base on the Environmental Aspects of the Transuranics. The data base was built to provide information support to the Nevada Applied Ecology Group (NAEG) of DOE`s Nevada Operations Office. The general scope covers environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. This annotated bibliography highlights literature on plutonium 238 and 239 and americium 241 in the critical organs of man and animals. Studies on the migration of plutonium and the transplutonics through the environment are also emphasized. Supporting informationmore » on ecology of the Nevada Test Site and reviews and summarizing literature on other radionuclides have been included at the request of the NAEG. The references are arranged by subject category with leading authors appearing alphabetically within each category. Indexes are provided for author(s), geographic location, keywords, taxonomic name, title, and publication description.« less

Laboratory safety aspects of SARS at Biosafety Level 2.

PubMed

Barkham, T M S

2004-03-01

The severe acute respiratory syndrome (SARS)-associated coronavirus causes severe disease, is transmissible to the community and there is no effective prophylaxis or treatment--perhaps fulfilling the criteria for biohazard group 3 or 4. The recommendation to use Biosafety Level (BSL)3 practices within a BSL2 environment appears to have been a practical decision based on available resources; most diagnostic laboratories operate at BSL2. Safety is achieved with controls in administration, engineering and personal protective equipment/behaviour. At the heart of every safety policy is a risk assessment based on the exact manipulations employed. Excessive administrative and engineering controls are less important than the training and personal attitudes, abilities and understanding of the staff. The SARS outbreak focused our attention on the safety aspects of common mundane tasks, such as decapping blood tubes. Laboratories often claim they follow certain practices but casual observation does not always support these claims. Guidelines differed and created uncertainty. This was stressful for laboratory staff held accountable for their implementation. Attempts to categorise risks and their management into neatly wrapped parcels are attractive, but closer inspection reveals a subjective element that allows doubt to creep in with varying interpretations of the literature. Staff most at risk were those handling respiratory samples. Staff receiving samples via pneumatic tubes had least control over their exposure and were potentially exposed to aerosols from leaking samples. Risk assessment remains a balance between cost and benefit.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

NASA Astrophysics Data System (ADS)

Falakh, Fajrul; Setiani, Onny

2018-02-01

Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations.

PubMed

Castleman, Barry; Allen, Barbara; Barca, Stefania; Bohme, Susanna Rankin; Henry, Emmanuel; Kaur, Amarjit; Massard-Guilbaud, Genvieve; Melling, Joseph; Menendez-Navarro, Alfredo; Renfrew, Daniel; Santiago, Myrna; Sellers, Christopher; Tweedale, Geoffrey; Zalik, Anna; Zavestoski, Stephen

2008-01-01

At a conference held at Stony Brook University in December 2007, "Dangerous Trade: Histories of Industrial Hazard across a Globalizing World," participants endorsed a Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations. The Code outlines practices that would ensure corporations enact the highest health and environmentally protective measures in all the locations in which they operate. Corporations should observe international guidelines on occupational exposure to air contaminants, plant safety, air and water pollutant releases, hazardous waste disposal practices, remediation of polluted sites, public disclosure of toxic releases, product hazard labeling, sale of products for specific uses, storage and transport of toxic intermediates and products, corporate safety and health auditing, and corporate environmental auditing. Protective measures in all locations should be consonant with the most protective measures applied anywhere in the world, and should apply to the corporations' subsidiaries, contractors, suppliers, distributors, and licensees of technology. Key words: corporations, sustainability, environmental protection, occupational health, code of practice.

An Analytic Network Process approach for the environmental aspect selection problem — A case study for a hand blender

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bereketli Zafeirakopoulos, Ilke, E-mail: ibereketli@gsu.edu.tr; Erol Genevois, Mujde, E-mail: merol@gsu.edu.tr

Life Cycle Assessment is a tool to assess, in a systematic way, the environmental aspects and its potential environmental impacts and resources used throughout a product's life cycle. It is widely accepted and considered as one of the most powerful tools to support decision-making processes used in ecodesign and sustainable production in order to learn about the most problematic parts and life cycle phases of a product and to have a projection for future improvements. However, since Life Cycle Assessment is a cost and time intensive method, companies do not intend to carry out a full version of it, exceptmore » for large corporate ones. Especially for small and medium sized enterprises, which do not have enough budget for and knowledge on sustainable production and ecodesign approaches, focusing only on the most important possible environmental aspect is unavoidable. In this direction, finding the right environmental aspect to work on is crucial for the companies. In this study, a multi-criteria decision-making methodology, Analytic Network Process is proposed to select the most relevant environmental aspect. The proposed methodology aims at providing a simplified environmental assessment to producers. It is applied for a hand blender, which is a member of the Electrical and Electronic Equipment family. The decision criteria for the environmental aspects and relations of dependence are defined. The evaluation is made by the Analytic Network Process in order to create a realistic approach to inter-dependencies among the criteria. The results are computed via the Super Decisions software. Finally, it is observed that the procedure is completed in less time, with less data, with less cost and in a less subjective way than conventional approaches. - Highlights: • We present a simplified environmental assessment methodology to support LCA. • ANP is proposed to select the most relevant environmental aspect. • ANP deals well with the interdependencies between

Ergonomic aspects simulation digital online: an educational game proposal to promote environmental education.

PubMed

Arbex, D F; Jappur, R; Selig, P; Varvakis, G

2012-01-01

This article addresses the ergonomic criteria that guide the construction of an educational game called Environmental Simulator. The focus is on environment navigation considering aspects of content architecture and its esthetics functionality.

Interactions of environmental and safety measures for sustainable road transportation.

DOT National Transportation Integrated Search

2011-01-01

This study examined interactions of environmental and safety measures for road : transportation. The results showed that a vast majority of the examined measures support : both policy objectives and thereby contribute effectively to sustainable trans...

Radiation Safety Aspects of Nanotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoover, Mark; Myers, David; Cash, Leigh Jackson

This Report is intended primarily for operational health physicists, radiation safety officers, and internal dosimetrists who are responsible for establishing and implementing radiation safety programs involving radioactive nanomaterials. It should also provide useful information for workers, managers and regulators who are either working directly with or have other responsibilities related to work with radioactive nanomaterials.

Eco-innovative design approach: Integrating quality and environmental aspects in prioritizing and solving engineering problems

NASA Astrophysics Data System (ADS)

Chakroun, Mahmoud; Gogu, Grigore; Pacaud, Thomas; Thirion, François

2014-09-01

This study proposes an eco-innovative design process taking into consideration quality and environmental aspects in prioritizing and solving technical engineering problems. This approach provides a synergy between the Life Cycle Assessment (LCA), the nonquality matrix, the Theory of Inventive Problem Solving (TRIZ), morphological analysis and the Analytical Hierarchy Process (AHP). In the sequence of these tools, LCA assesses the environmental impacts generated by the system. Then, for a better consideration of environmental aspects, a new tool is developed, the non-quality matrix, which defines the problem to be solved first from an environmental point of view. The TRIZ method allows the generation of new concepts and contradiction resolution. Then, the morphological analysis offers the possibility of extending the search space of solutions in a design problem in a systematic way. Finally, the AHP identifies the promising solution(s) by providing a clear logic for the choice made. Their usefulness has been demonstrated through their application to a case study involving a centrifugal spreader with spinning discs.

Environmental aspects of the transuranics: a selected, annotated bibliography. [Pu-238, Pu-239

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ensminger, J.T.; Martin, F.M.; Fore, C.S.

This eighth published bibliography of 427 references is compiled from the Nevada Applied Ecology Information Center's Data Base on the Environmental Aspects of the Transuranics. The data base was built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA's Nevada Operations Office. The general scope covers environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. This bibliography highlights literature on plutonium 238 and 239 and americium in the critical organs of man and animals. Supporting information on ecology of the Nevada Test Site and reviews and summarizing literature on other radionuclides have beenmore » included at the request of the NAEG. The references are arranged by subject category with leading authors appearing alphabetically in each category. Indexes are provided for author(s), geographic location, keyword(s), taxon, title, and publication description.« less

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

PubMed

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

Code of Federal Regulations, 2012 CFR

2012-04-01

... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

Code of Federal Regulations, 2010 CFR

2010-04-01

... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

Code of Federal Regulations, 2011 CFR

2011-04-01

... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

Domain 2: Sport Safety and Injury Prevention

ERIC Educational Resources Information Center

Gurchiek, Larry; Mokha, Monique Butcher

2004-01-01

Most coaches recognize the importance of creating a safe environment and preventing injuries of their athletes. Domain 2 is dedicated to this important aspect of coaching, and outlines specific areas within safety and injury prevention that coaches should address. Domain 2 sets the standards for facility, equipment, and environmental safety…

How can nanobiotechnology oversight advance science and industry: examples from environmental, health, and safety studies of nanoparticles (nano-EHS)

NASA Astrophysics Data System (ADS)

Wang, Jing; Asbach, Christof; Fissan, Heinz; Hülser, Tim; Kuhlbusch, Thomas A. J.; Thompson, Drew; Pui, David Y. H.

2011-04-01

Nanotechnology has great potential to transform science and industry in the fields of energy, material, environment, and medicine. At the same time, more concerns are being raised about the occupational health and safety of nanomaterials in the workplace and the implications of nanotechnology on the environment and living systems. Studies on environmental, health, and safety (EHS) issues of nanomaterials have a strong influence on public acceptance of nanotechnology and, eventually, affect its sustainability. Oversight and regulation by government agencies and non-governmental organizations (NGOs) play significant roles in ensuring responsible and environmentally friendly development of nanotechnology. The EHS studies of nanomaterials can provide data and information to help the development of regulations and guidelines. We present research results on three aspects of EHS studies: physico-chemical characterization and measurement of nanomaterials; emission, exposure, and toxicity of nanomaterials; and control and abatement of nanomaterial releases using filtration technology. Measurement of nanoparticle agglomerates using a newly developed instrument, the Universal NanoParticle Analyzer (UNPA), is discussed. Exposure measurement results for silicon nanoparticles in a pilot scale production plant are presented, as well as exposure measurement and toxicity study of carbon nanotubes (CNTs). Filtration studies of nanoparticle agglomerates are also presented as an example of emission control methods.

Environment, health and safety issues for sources used in MOVPE growth of compound semiconductors

NASA Astrophysics Data System (ADS)

Shenai-Khatkhate, Deodatta V.; Goyette, Randall J.; DiCarlo, Ronald L., Jr.; Dripps, Gregory

2004-12-01

As metalorganic vapor-phase epitaxy (MOVPE) is becoming well-established production technology, there are equally growing concerns associated with its bearing on personnel and community safety, environmental impact and maximum quantities of hazardous materials permissible in the device fabrication operations. Safety as well as responsible environmental care has always been of paramount importance in the MOVPE-based crystal growth of compound semiconductors. In this paper, we present the findings from workplace exposure monitoring studies on conventional MOVPE sources such as trimethylgallium, triethylgallium, trimethylantimony and diethylzinc. Also reviewed are the environmental, health and safety hazard aspects for metalorganic sources of routine elements, and the means to minimize the risks (i.e., engineering controls) involved while using these MOVPE sources.

78 FR 67326 - Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... 1625-AC05 Safety and Environmental Management System Requirements for Vessels on the U.S. Outer... ``Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental Shelf... of industry to ensure stakeholders have adequate time to submit complete responses. DATES: Comments...

An integrative model of organizational safety behavior.

PubMed

Cui, Lin; Fan, Di; Fu, Gui; Zhu, Cherrie Jiuhua

2013-06-01

This study develops an integrative model of safety management based on social cognitive theory and the total safety culture triadic framework. The purpose of the model is to reveal the causal linkages between a hazardous environment, safety climate, and individual safety behaviors. Based on primary survey data from 209 front-line workers in one of the largest state-owned coal mining corporations in China, the model is tested using structural equation modeling techniques. An employee's perception of a hazardous environment is found to have a statistically significant impact on employee safety behaviors through a psychological process mediated by the perception of management commitment to safety and individual beliefs about safety. The integrative model developed here leads to a comprehensive solution that takes into consideration the environmental, organizational and employees' psychological and behavioral aspects of safety management. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Environmental, Safety, and Health Considerations: Composite Materials in the Aerospace Industry

NASA Technical Reports Server (NTRS)

Chu, Huai-Pu (Compiler)

1994-01-01

The Aerospace Industries Association, Suppliers of Advanced Composite Materials Association, and the National Aeronautics and Space Administration co-sponsored a conference on 'Environmental, Safety, and Health Considerations--Composite Materials in the Aerospace Industry.' The conference was held in Mesa, Arizona, on October 20-21, 1994. Seventeen papers were presented in four sessions including general information, safety, waste, and emissions from composites. Topics range from product stewardship, best work practice, biotransformation of uncured composite materials, to hazardous waste determination and offgassing of composite materials.

Nuclear Safety. Technical progress journal, April--June 1996: Volume 37, No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muhlheim, M D

1996-01-01

This journal covers significant issues in the field of nuclear safety. Its primary scope is safety in the design, construction, operation, and decommissioning of nuclear power reactors worldwide and the research and analysis activities that promote this goal, but it also encompasses the safety aspects of the entire nuclear fuel cycle, including fuel fabrication, spent-fuel processing and handling, nuclear waste disposal, the handling of fissionable materials and radioisotopes, and the environmental effects of all these activities.

10 CFR 50.49 - Environmental qualification of electric equipment important to safety for nuclear power plants.

Code of Federal Regulations, 2011 CFR

2011-01-01

... occurrences, design basis accidents, external events, and natural phenomena for which the plant must be... important to safety, (2) protection of electric equipment important to safety against other natural phenomena and external events, and (3) environmental qualification of electric equipment important to safety...

Recent Accomplishments and Future Directions in US Fusion Safety & Environmental Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

David A. Petti; Brad J. Merrill; Phillip Sharpe

2006-07-01

The US fusion program has long recognized that the safety and environmental (S&E) potential of fusion can be attained by prudent materials selection, judicious design choices, and integration of safety requirements into the design of the facility. To achieve this goal, S&E research is focused on understanding the behavior of the largest sources of radioactive and hazardous materials in a fusion facility, understanding how energy sources in a fusion facility could mobilize those materials, developing integrated state of the art S&E computer codes and risk tools for safety assessment, and evaluating S&E issues associated with current fusion designs. In thismore » paper, recent accomplishments are reviewed and future directions outlined.« less

The Environmental Health/Home Safety Education Project: a successful and practical U.S.-Mexico border initiative.

PubMed

Forster-Cox, Susan C; Mangadu, Thenral; Jacquez, Benjamín; Fullerton, Lynne

2010-05-01

The Environmental Health/Home Safety Education Project (Proyecto de Salud Ambiental y Seguridad en el Hogar) has been developed in response to a wide array of severe and often preventable environmental health issues occurring in and around homes on the U.S.-Mexico border. Utilizing well-trained community members, called promotoras , homes are visited and assessed for potential environmental hazards, including home fire and food safety issues. Data analyzed from project years 2002 to 2005 shows a significant impact in knowledge levels and initial behavior change among targeted participants as it relates to fire and food safety issues. Since the initiation of the project in 1999, hundreds of participants have improved their quality of life by making their homes safer. The project has proven to be sustainable, replicable, flexible, and attractive to funders.

Nuclear Safety. Technical progress journal, January--March 1994: Volume 35, No. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, E G

1994-01-01

This is a journal that covers significant issues in the field of nuclear safety. Its primary scope is safety in the design, construction, operation, and decommissioning of nuclear power reactors worldwide and the research and analysis activities that promote this goal, but it also encompasses the safety aspects of the entire nuclear fuel cycle, including fuel fabrication, spent-fuel processing and handling, and nuclear waste disposal, the handling of fissionable materials and radioisotopes, and the environmental effects of all these activities.

Safe laser application requires more than laser safety

NASA Astrophysics Data System (ADS)

Frevel, A.; Steffensen, B.; Vassie, L.

1995-02-01

An overview is presented concerning aspects of laser safety in European industrial laser use. Surveys indicate that there is a large variation in the safety strategies amongst industrial laser users. Some key problem areas are highlighted. Emission of hazardous substances is a major problem for users of laser material processing systems where the majority of the particulate is of a sub-micrometre size, presenting a respiratory hazard. Studies show that in many cases emissions are not frequently monitored in factories and uncertainty exists over the hazards. Operators of laser machines do not receive adequate job training or safety training. The problem is compounded by a plethora of regulations and standards which are difficult to interpret and implement, and inspectors who are not conversant with the technology or the issues. A case is demonstrated for a more integrated approach to laser safety, taking into account the development of laser applications, organizational and personnel development, in addition to environmental and occupational health and safety aspects. It is necessary to achieve a harmonization between these elements in any organization involved in laser technology. This might be achieved through establishing technology transfer centres in laser technology.

Structural and proactive safety aspects of oxidation debris from multiwalled carbon nanotubes.

PubMed

Stéfani, Diego; Paula, Amauri J; Vaz, Boniek G; Silva, Rodrigo A; Andrade, Nádia F; Justo, Giselle Z; Ferreira, Carmen V; Filho, Antonio G Souza; Eberlin, Marcos N; Alves, Oswaldo L

2011-05-15

The removal of oxidation debris from the oxidized carbon nanotube surface with a NaOH treatment is a key step for an effective functionalization and quality improvement of the carbon nanotube samples. In this work, we show via infrared spectroscopy and ultrahigh resolution and accuracy mass spectrometry that oxidation debris obtained from HNO(3)-treated multiwalled carbon nanotubes is a complex mixture of highly condensed aromatic oxygenated carbonaceous fragments. We have also evaluated their cytotoxicity by using BALB/c 3T3 mouse fibroblasts and HaCaT human keratinocytes as models. By knowing the negative aspects of dissolved organic carbon (DOC) to the water quality, we have demonstrated the removal of these carbon nanotube residues from the NaOH solution (wastewater) by using aluminium sulphate, which is a standard coagulant agent used in conventional drinking water purification and wastewater treatment plants. Our results contribute to elucidate the structural and proactive safety aspects of oxidation debris from oxidized carbon nanotubes towards a greener nanotechnology. Copyright © 2011 Elsevier B.V. All rights reserved.

Environmental, health and safety assessment of photovoltaics

NASA Technical Reports Server (NTRS)

Rose, E. C.

1983-01-01

The environmental, health, and safety (E, H and S) concerns associated with the fabrication, deployment, and decommissioning of photovoltaic (PV) systems in terrestial applications are identified and assessed. Discussion is limited to crystalline silicon technologies. The primary E, H, and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.

Environmental supports for walking/biking and traffic safety: income and ethnicity disparities.

PubMed

Yu, Chia-Yuan

2014-10-01

The present study investigates the influence of income, ethnicity, and built environmental characteristics on the percentages of workers who walk/bike as well as on pedestrian/cyclist crash rates. Furthermore, income and ethnicity disparities are also explored. This study chose 162 census tracts in Austin as the unit of analysis. To explore income and ethnicity differences in built environments, this study examined the associations of the poverty rate, the percentage of white population, and the percentage of Hispanic population to each built environmental variable. Path models were applied to examine environmental supports of walking/biking and pedestrian/cyclist safety. Areas with high poverty rates had more biking trips and experienced more cyclist crashes, while areas with a high percentage of white population generated more walking trips and fewer pedestrian crashes. Sidewalk completeness and mixed land uses promoted walking to work but increased the crash risk for pedestrians as well. In terms of biking behaviors, road density and transit stop density both increased biking trips and cyclist crashes. Environmental designs that both encourage walking/biking trips and generate more safety threats should attract more attention from policy makers. Policies should also be more devoted to enhancing the mobility and health for areas with high poverty rates. Copyright © 2014 Elsevier Inc. All rights reserved.

Biophysics, environmental stochasticity, and the evolution of thermal safety margins in intertidal limpets.

PubMed

Denny, M W; Dowd, W W

2012-03-15

As the air temperature of the Earth rises, ecological relationships within a community might shift, in part due to differences in the thermal physiology of species. Prediction of these shifts - an urgent task for ecologists - will be complicated if thermal tolerance itself can rapidly evolve. Here, we employ a mechanistic approach to predict the potential for rapid evolution of thermal tolerance in the intertidal limpet Lottia gigantea. Using biophysical principles to predict body temperature as a function of the state of the environment, and an environmental bootstrap procedure to predict how the environment fluctuates through time, we create hypothetical time-series of limpet body temperatures, which are in turn used as a test platform for a mechanistic evolutionary model of thermal tolerance. Our simulations suggest that environmentally driven stochastic variation of L. gigantea body temperature results in rapid evolution of a substantial 'safety margin': the average lethal limit is 5-7°C above the average annual maximum temperature. This predicted safety margin approximately matches that found in nature, and once established is sufficient, in our simulations, to allow some limpet populations to survive a drastic, century-long increase in air temperature. By contrast, in the absence of environmental stochasticity, the safety margin is dramatically reduced. We suggest that the risk of exceeding the safety margin, rather than the absolute value of the safety margin, plays an underappreciated role in the evolution of thermal tolerance. Our predictions are based on a simple, hypothetical, allelic model that connects genetics to thermal physiology. To move beyond this simple model - and thereby potentially to predict differential evolution among populations and among species - will require significant advances in our ability to translate the details of thermal histories into physiological and population-genetic consequences.

Environmental Management

ScienceCinema

None

2018-01-16

Another key aspect of the NNSS mission is Environmental Management program, which addresses the environmental legacy from historic nuclear weapons related activities while also ensuring the health and safety of present day workers, the public, and the environment as current and future missions are completed. The Area 5 Radioactive Waste Management site receives low-level and mixed low-level waste from some 28 different generators from across the DOE complex in support of the legacy clean-up DOE Environmental Management project. Without this capability, the DOE would not be able to complete the clean up and proper disposition of these wastes. The program includes environmental protection, compliance, and monitoring of the air, water, plants, animals, and cultural resources at the NNSS. Investigation and implementation of appropriate corrective actions to address the contaminated ground water facilities and soils resulting from historic nuclear testing activities, the demolition of abandoned nuclear facilities, as well as installation of ground water wells to identify and monitor the extent of ground water contamination.

The School Assessment for Environmental Typology (SAfETy): An Observational Measure of the School Environment.

PubMed

Bradshaw, Catherine P; Milam, Adam J; Furr-Holden, C Debra M; Johnson, Sarah Lindstrom

2015-12-01

School safety is of great concern for prevention researchers, school officials, parents, and students, yet there are a dearth of assessments that have operationalized school safety from an organizational framework using objective tools and measures. Such a tool would be important for deriving unbiased assessments of the school environment, which in turn could be used as an evaluative tool for school violence prevention efforts. The current paper presents a framework for conceptualizing school safety consistent with Crime Prevention through Environmental Design (CPTED) model and social disorganization theory, both of which highlight the importance of context as a driver for adolescents' risk for involvement in substance use and violence. This paper describes the development of a novel observational measure, called the School Assessment for Environmental Typology (SAfETy), which applies CPTED and social disorganizational frameworks to schools to measure eight indicators of school physical and social environment (i.e., disorder, trash, graffiti/vandalism, appearance, illumination, surveillance, ownership, and positive behavioral expectations). Drawing upon data from 58 high schools, we provide preliminary data regarding the validity and reliability of the SAfETy and describe patterns of the school safety indicators. Findings demonstrate the reliability and validity of the SAfETy and are discussed with regard to the prevention of violence in schools.

Quality and safety aspects in histopathology laboratory

PubMed Central

Adyanthaya, Soniya; Jose, Maji

2013-01-01

Histopathology is an art of analyzing and interpreting the shapes, sizes and architectural patterns of cells and tissues within a given specific clinical background and a science by which the image is placed in the context of knowledge of pathobiology, to arrive at an accurate diagnosis. To function effectively and safely, all the procedures and activities of histopathology laboratory should be evaluated and monitored accurately. In histopathology laboratory, the concept of quality control is applicable to pre-analytical, analytical and post-analytical activities. Ensuring safety of working personnel as well as environment is also highly important. Safety issues that may come up in a histopathology lab are primarily those related to potentially hazardous chemicals, biohazardous materials, accidents linked to the equipment and instrumentation employed and general risks from electrical and fire hazards. This article discusses quality management system which can ensure quality performance in histopathology laboratory. The hazards in pathology laboratories and practical safety measures aimed at controlling the dangers are also discussed with the objective of promoting safety consciousness and the practice of laboratory safety. PMID:24574660

Environmental, health, and safety issues for the petroleum geologist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mathis, R.E.

1993-09-01

As the oil and gas industry moves toward the twenty-first century, professional within the industry must adjust to changes placed upon them from within and without. The role of the geologist is changing, as is the focal point of attention. Environmental issues require scrutiny of those zones once passed by with little or no interest while exploring for oil and gas reservoirs at deeper and deeper horizons; shallow zones of fresh or usable water are now often the main focus of attention. Has my training prepared me for being the company [open quotes]hydrologist[close quotes] or [open quotes]environmental expert[close quotes] Whatmore » does this new role mean for me Am I to be the [open quotes]Designated Jailee[close quotes] What should I know Environmental Assessment, site characterization, permissible exposure limit, time weighted average, and like terms are new to the ears of most petroleum geologists. These and other environmental health and safety terms impact the profession. What geologists may be expected to do in regard to them are issues of major concern. This paper will try to answer these questions and more.« less

Characteristics and environmental aspects of slag: a review

USGS Publications Warehouse

Piatak, Nadine M.; Parsons, Michael B.; Seal, Robert R.

2015-01-01

sulfides. Because of its characteristics, ferrous slag is commonly used for construction and environmental applications, whereas both non-ferrous and ferrous slag may be reprocessed for secondary metal recovery. Both types of slag have been a source of some environmental contamination. Research into the environmental aspects of slag will continue to be an important topic whether the goal is its reuse, recycling, or remediation.

A risk-based, product-level approach for assuring aquatic environmental safety of cleaning products in the context of sustainability: The Environmental Safety Check (ESC) scheme of the A.I.S.E. Charter for Sustainable Cleaning.

PubMed

Pickup, John Alexander; Dewaele, Joost; Furmanski, Nicola L; Kowalczyk, Agnieszka; Luijkx, Gerard Ca; Mathieu, Sophie; Stelter, Norbert

2017-01-01

Cleaning products have long been a focus of efforts to improve sustainability and assure safety for the aquatic environment when disposed of after use. The latter is addressed at ingredient level through environmental risk assessment, including in formal frameworks such as REACH. Nevertheless, in the context of programs to improve overall sustainability, stakeholders demand both environmental safety assurance and progress at product level. Current product-level approaches for aquatic toxicity (e.g., USEtox™, Critical Dilution Volume) can be seen as predominantly hazard-based. The more logical approach would be risk-based, because ecotoxicity is generally threshold-dependent and hazard-based assessment produces conflicts with risk-based learnings. The development of a risk-based approach to assess formulated products is described: the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.) Charter Environmental Safety Check (ESC), which is consistent with the scientific principles underlying REACH. This is implemented through a simple spreadsheet tool and internal database of ingredient parameters including predicted no-effect concentration (PNEC) and removal rate. A novel feature is applying market volume information for both product types and ingredients to permit a risk-based calculation. To pass the ESC check, the projected environmental safety ratio (PESR) for each ingredient as formulated and dosed (unless cleared by a published risk assessment or exempted as inherently low risk) must be less than 1. The advantages of a risk-based approach are discussed. The strengths and limitations of various possible approaches to standard-setting, product-ranking and driving continuous improvement in respect of potential ecotoxic impacts on the aquatic environment are considered. It is proposed that as ecotoxicity is generally accepted to be threshold-dependent, with no effect below the threshold, the most constructive approach to continuous

Handling And Safety Aspects Of Fiber Optic Laser Beam Delivery Systems

NASA Astrophysics Data System (ADS)

Schonborn, K.-H.; Wodrich, W.

1988-06-01

Using lasers for therapeutic applications is getting more and more accepted. In ophthalmology Ar-lasers for intraocular applications are quite common. The Nd:YAG-laser is used as a high power tool in connection with silica fibers for different extracorporal and intracorporal applications. The CO2-laser is the cutting laser, one problem being the beam transmission: The state of the art in fibers is not sufficient up to now. Because of the high power used safety against laser radiation hazard is of great importance. The safety in laser use is primarily dependent on the surgeons cautiousness, e.g. using laser protection goggels, observing that the spot of the aiming beam is present etc. On the other hand the laser and fiber system has to be inherently safe by appropriate technical means as far as possible. An additional aspect adding to safety is the handling: With easier system handling less attention of the surgeon is necessary for driving the apparatus. Thus he can concentrate on the patient and on the procedure. In considering the fiber system one important point in handling and safety is the coupling of the fiber to the laser head. The development philosophy in this coupling may be divided into two groups: - one is trying to use standard connectors which were initially developed for data transmission; - the other is using special connectors. One example of the first group is the guiding of the laser beam from the Ar-laser to the slit-lamp in ophtalmology. Here the well-known F-SMA connectors together with a special fiber with adapted numerical aperture are used. The advantage of such a system is the low price of the connector. For high power lasers such as the clinical Nd:YAG lasers with 40 to 150 W those connectors are not suitable. Up to now every laser manufacturer developed his own connector system in this field.

Health and safety plan for the Environmental Restoration Program at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, C. Jr.; Burman, S.N.; Cipriano, D.J. Jr.

1994-08-01

This Programmatic Health and Safety plan (PHASP) is prepared for the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) Program. This plan follows the format recommended by the U.S. Environmental Protection Agency (EPA) for remedial investigations and feasibility studies and that recommended by the EM40 Health and Safety Plan (HASP) Guidelines (DOE February 1994). This plan complies with the Occupational Safety and Health Administration (OSHA) requirements found in 29 CFR 1910.120 and EM-40 guidelines for any activities dealing with hazardous waste operations and emergency response efforts and with OSHA requirements found in 29 CFR 1926.65.more » The policies and procedures in this plan apply to all Environmental Restoration sites and activities including employees of Energy Systems, subcontractors, and prime contractors performing work for the DOE ORNL ER Program. The provisions of this plan are to be carried out whenever activities are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices to minimize hazards to human health and safety and to the environment from event such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water.« less

Consensus statement: patient safety, healthcare-associated infections and hospital environmental surfaces.

PubMed

Roques, Christine; Al Mousa, Haifaa; Duse, Adriano; Gallagher, Rose; Koburger, Torsten; Lingaas, Egil; Petrosillo, Nicola; Škrlin, Jasenka

2015-01-01

Healthcare-associated infections have serious implications for both patients and hospitals. Environmental surface contamination is the key to transmission of nosocomial pathogens. Routine manual cleaning and disinfection eliminates visible soil and reduces environmental bioburden and risk of transmission, but may not address some surface contamination. Automated area decontamination technologies achieve more consistent and pervasive disinfection than manual methods, but it is challenging to demonstrate their efficacy within a randomized trial of the multiple interventions required to reduce healthcare-associated infection rates. Until data from multicenter observational studies are available, automated area decontamination technologies should be an adjunct to manual cleaning and disinfection within a total, multi-layered system and risk-based approach designed to control environmental pathogens and promote patient safety.

76 FR 64431 - Reorganization of Title 30: Bureaus of Safety and Environmental Enforcement and Ocean Energy...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

...This rule contains regulations that will be under the authority of two newly formed Bureaus, the Bureau of Safety and Environmental Enforcement (BSEE) and the Bureau of Ocean Energy Management (BOEM), both within the Department of the Interior. On May 19, 2010, the Secretary of the Interior announced the separation of the responsibilities performed by the Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE) (formerly the Minerals Management Service) into three new separate organizations: Office of Natural Resources Revenue (ONRR), Bureau of Ocean Energy Management (BOEM), and Bureau of Safety and Environmental Enforcement (BSEE). Those regulations that will apply to the authority of BSEE organization will remain in 30 CFR chapter II, but be retitled ``Bureau of Safety and Environmental Enforcement.'' This rule removes from chapter II those regulations that will apply to the authority of BOEM and recodifies them into a new 30 CFR chapter V entitled ``Bureau of Ocean Energy Management.''

Advanced reactors and associated fuel cycle facilities: safety and environmental impacts.

PubMed

Hill, R N; Nutt, W M; Laidler, J J

2011-01-01

The safety and environmental impacts of new technology and fuel cycle approaches being considered in current U.S. nuclear research programs are contrasted to conventional technology options in this paper. Two advanced reactor technologies, the sodium-cooled fast reactor (SFR) and the very high temperature gas-cooled reactor (VHTR), are being developed. In general, the new reactor technologies exploit inherent features for enhanced safety performance. A key distinction of advanced fuel cycles is spent fuel recycle facilities and new waste forms. In this paper, the performance of existing fuel cycle facilities and applicable regulatory limits are reviewed. Technology options to improve recycle efficiency, restrict emissions, and/or improve safety are identified. For a closed fuel cycle, potential benefits in waste management are significant, and key waste form technology alternatives are described. Copyright © 2010 Health Physics Society

Environmental Health and Safety Hazards Experienced by Home Health Care Providers

PubMed Central

Polivka, Barbara J.; Wills, Celia E.; Darragh, Amy; Lavender, Steven; Sommerich, Carolyn; Stredney, Donald

2015-01-01

The number of personnel providing in-home health care services is increasing substantially. The unique configuration of environmental hazards in individual client homes has a significant impact on the safety and health of home health care providers (HHPs). This mixed-methods study used data from a standardized questionnaire, focus groups, and individual interviews to explore environmental health and safety hazards encountered by HHPs in client homes. The participant sample (N = 68) included nurses, aides, therapists, and owners/managers from a variety of geographic locations. The most often-reported hazards were trip/slip/lift hazards, biohazards, and hazards from poor air quality, allergens, pests and rodents, and fire and burns. Frequency of identified key hazards varied by room, that is, kitchen (e.g., throw rugs, water on floor), bathroom (e.g., tight spaces for client handling), bedroom (e.g., bed too low), living room (e.g., animal waste), and hallway (e.g., clutter). Findings indicate the need for broader training to enable HHPs to identify and address hazards they encounter in client homes. PMID:26268486

Integrating environmental management into food safety and food packaging in Malaysia: review of the food regulation 1985

NASA Astrophysics Data System (ADS)

Nordin, N. H.; Hara, H.; Kaida, N.

2017-05-01

Food safety is an important issue that is related to public safety to prevent the toxicity threats of the food. Management through legal approach has been used in Malaysia as one of the predominant approaches to manage the environment. In this regard, the Food Regulation 1985 has been one of the mechanisms of environmental management through legal approach in controlling the safety of packaged food in food packaging industry in Malaysia. The present study aims to analyse and to explain the implementation of the Food Regulation 1985 in controlling the safety of packaged food in Malaysia and to integrate the concept of environmental management into the food safety issue. Qualitative analysis on the regulation document revealed that there are two main themes, general and specific, while their seven sub themes are included harmful packages, safety packages, reuse packages, polyvinyl chloride (PVC), alcoholic bottle, toys, money and others and iron powder. The implementation of the Food Regulation 1985 in controlling the safety of packaged food should not be regarded solely for regulation purposes but should be further developed for a broader sense of food safety from overcoming the food poisoning.

Site Environmental Report for 2006. Volume I, Environment, Health, and Safety Division

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2007-09-30

Each year, Ernest Orlando Lawrence Berkeley National Laboratory prepares an integrated report on its environmental programs to satisfy the requirements of United States Department of Energy Order 231.1A, Environment, Safety, and Health Reporting.1 The Site Environmental Report for 2006 summarizes Berkeley Lab’s environmental management performance, presents environmental monitoring results, and describes significant programs for calendar year 2006. (Throughout this report, Ernest Orlando Lawrence Berkeley National Laboratory is referred to as “Berkeley Lab,” “the Laboratory,” “Lawrence Berkeley National Laboratory,” and “LBNL.”) The report is separated into two volumes. Volume I is organized into an executive summary followed by six chapters thatmore » contain an overview of the Laboratory, a discussion of the Laboratory’s environmental management system, the status of environmental programs, and summarized results from surveillance and monitoring activities. Volume II contains individual data results from surveillance and monitoring activities.« less

Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

NASA Astrophysics Data System (ADS)

Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

2017-11-01

The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

Analysis on Dangerous Source of Large Safety Accident in Storage Tank Area

NASA Astrophysics Data System (ADS)

Wang, Tong; Li, Ying; Xie, Tiansheng; Liu, Yu; Zhu, Xueyuan

2018-01-01

The difference between a large safety accident and a general accident is that the consequences of a large safety accident are particularly serious. To study the tank area which factors directly or indirectly lead to the occurrence of large-sized safety accidents. According to the three kinds of hazard source theory and the consequence cause analysis of the super safety accident, this paper analyzes the dangerous source of the super safety accident in the tank area from four aspects, such as energy source, large-sized safety accident reason, management missing, environmental impact Based on the analysis of three kinds of hazard sources and environmental analysis to derive the main risk factors and the AHP evaluation model is established, and after rigorous and scientific calculation, the weights of the related factors in four kinds of risk factors and each type of risk factors are obtained. The result of analytic hierarchy process shows that management reasons is the most important one, and then the environmental factors and the direct cause and Energy source. It should be noted that although the direct cause is relatively low overall importance, the direct cause of Failure of emergency measures and Failure of prevention and control facilities in greater weight.

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 1, Cell and battery safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohi, J M

1992-09-01

This report is the first of four volumes that identify and assess the environmental, health, and safety issues involved in using sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles that may affect the commercialization of Na/S batteries. This and the other reports on recycling, shipping, and vehicle safety are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD&D) program for Na/S battery technology. The reports review the status of Na/S battery RD&Dmore » and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers cell design and engineering as the basis of safety for Na/S batteries and describes and assesses the potential chemical, electrical, and thermal hazards and risks of Na/S cells and batteries as well as the RD&D performed, under way, or to address these hazards and risks. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, universities, and private industry. Subsequent volumes will address environmental, health, and safety issues involved in shipping cells and batteries, using batteries to propel electric vehicles, and recycling and disposing of spent batteries. The remainder of this volume is divided into two major sections on safety at the cell and battery levels. The section on Na/S cells describes major component and potential failure modes, design, life testing and failure testing, thermal cycling, and the safety status of Na/S cells. The section on batteries describes battery design, testing, and safety status. Additional EH&S information on Na/S batteries is provided in the appendices.« less

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

Thermal decomposition of nano-enabled thermoplastics: Possible environmental health and safety implications

PubMed Central

Sotiriou, Georgios A.; Singh, Dilpreet; Zhang, Fang; Chalbot, Marie-Cecile G.; Spielman-Sun, Eleanor; Hoering, Lutz; Kavouras, Ilias G.; Lowry, Gregory V.; Wohlleben, Wendel; Demokritou, Philip

2015-01-01

Nano-enabled products (NEPs) are currently part of our life prompting for detailed investigation of potential nano-release across their life-cycle. Particularly interesting is their end-of-life thermal decomposition scenario. Here, we examine the thermal decomposition of a widely used NEP, namely thermoplastic nanocomposites, and assess the properties of the byproducts (released aerosol and residual ash) and possible environmental health and safety implications. We focus on establishing a fundamental understanding on the effect of thermal decomposition parameters, such as polymer matrix, nanofiller properties, decomposition temperature, on the properties of byproducts using a recently-developed lab-based experimental integrated platform. Our results indicate that thermoplastic polymer matrix strongly influences size and morphology of released aerosol, while there was minimal but detectable nano-release, especially when inorganic nanofillers were used. The chemical composition of the released aerosol was found not to be strongly influenced by the presence of nanofiller at least for the low, industry-relevant loadings assessed here. Furthermore, the morphology and composition of residual ash was found to be strongly influenced by the presence of nanofiller. The findings presented here on thermal decomposition/incineration of NEPs raise important questions and concerns regarding the potential fate and transport of released engineered nanomaterials in environmental media and potential environmental health and safety implications. PMID:26642449

Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

PubMed

Lewis, Robert K

2016-10-01

On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

Site Environmental Report for 2004. Volume 1, Environment, Health, and Safety Division

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2005-09-30

Each year, Ernest Orlando Lawrence Berkeley National Laboratory prepares an integrated report on its environmental programs to satisfy the requirements of United States Department of Energy Order 231.1A, Environment, Safety, and Health Reporting.1 The Site Environmental Report for 2004 summarizes Berkeley Lab’s environmental management performance, presents environmental monitoring results, and describes significant programs for calendar year 2004. (Throughout this report, Ernest Orlando Lawrence Berkeley National Laboratory is referred to as “Berkeley Lab,” “the Laboratory,” “Lawrence Berkeley National Laboratory,” and “LBNL.”) The report is separated into two volumes. Volume I contains an overview of the Laboratory, the status of environmental programs,more » and summarized results from surveillance and monitoring activities. Volume II contains individual data results from these activities. This year, the Site Environmental Report was distributed by releasing it on the Web from the Berkeley Lab Environmental Services Group (ESG) home page, which is located at http://www.lbl.gov/ehs/esg/. Many of the documents cited in this report also are accessible from the ESG Web page. CD and printed copies of this Site Environmental Report are available upon request.« less

A Novel Multi-Sensor Environmental Perception Method Using Low-Rank Representation and a Particle Filter for Vehicle Reversing Safety

PubMed Central

Zhang, Zutao; Li, Yanjun; Wang, Fubing; Meng, Guanjun; Salman, Waleed; Saleem, Layth; Zhang, Xiaoliang; Wang, Chunbai; Hu, Guangdi; Liu, Yugang

2016-01-01

Environmental perception and information processing are two key steps of active safety for vehicle reversing. Single-sensor environmental perception cannot meet the need for vehicle reversing safety due to its low reliability. In this paper, we present a novel multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety. The proposed system consists of four main steps, namely multi-sensor environmental perception, information fusion, target recognition and tracking using low-rank representation and a particle filter, and vehicle reversing speed control modules. First of all, the multi-sensor environmental perception module, based on a binocular-camera system and ultrasonic range finders, obtains the distance data for obstacles behind the vehicle when the vehicle is reversing. Secondly, the information fusion algorithm using an adaptive Kalman filter is used to process the data obtained with the multi-sensor environmental perception module, which greatly improves the robustness of the sensors. Then the framework of a particle filter and low-rank representation is used to track the main obstacles. The low-rank representation is used to optimize an objective particle template that has the smallest L-1 norm. Finally, the electronic throttle opening and automatic braking is under control of the proposed vehicle reversing control strategy prior to any potential collisions, making the reversing control safer and more reliable. The final system simulation and practical testing results demonstrate the validity of the proposed multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety. PMID:27294931

A Novel Multi-Sensor Environmental Perception Method Using Low-Rank Representation and a Particle Filter for Vehicle Reversing Safety.

PubMed

Zhang, Zutao; Li, Yanjun; Wang, Fubing; Meng, Guanjun; Salman, Waleed; Saleem, Layth; Zhang, Xiaoliang; Wang, Chunbai; Hu, Guangdi; Liu, Yugang

2016-06-09

Environmental perception and information processing are two key steps of active safety for vehicle reversing. Single-sensor environmental perception cannot meet the need for vehicle reversing safety due to its low reliability. In this paper, we present a novel multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety. The proposed system consists of four main steps, namely multi-sensor environmental perception, information fusion, target recognition and tracking using low-rank representation and a particle filter, and vehicle reversing speed control modules. First of all, the multi-sensor environmental perception module, based on a binocular-camera system and ultrasonic range finders, obtains the distance data for obstacles behind the vehicle when the vehicle is reversing. Secondly, the information fusion algorithm using an adaptive Kalman filter is used to process the data obtained with the multi-sensor environmental perception module, which greatly improves the robustness of the sensors. Then the framework of a particle filter and low-rank representation is used to track the main obstacles. The low-rank representation is used to optimize an objective particle template that has the smallest L-1 norm. Finally, the electronic throttle opening and automatic braking is under control of the proposed vehicle reversing control strategy prior to any potential collisions, making the reversing control safer and more reliable. The final system simulation and practical testing results demonstrate the validity of the proposed multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety.

Safety and environmental constraints on space applications of fusion energy

NASA Technical Reports Server (NTRS)

Roth, J. Reece

1990-01-01

Some of the constraints are examined on fusion reactions, plasma confinement systems, and fusion reactors that are intended for such space related missions as manned or unmanned operations in near earth orbit, interplanetary missions, or requirements of the SDI program. Of the many constraints on space power and propulsion systems, those arising from safety and environmental considerations are emphasized since these considerations place severe constraints on some fusion systems and have not been adequately treated in previous studies.

10 CFR 50.49 - Environmental qualification of electric equipment important to safety for nuclear power plants.

Code of Federal Regulations, 2012 CFR

2012-01-01

... standard may be obtained from the Institute of Electrical and Electronics Engineers, Inc., 345 East 47th... 10 Energy 1 2012-01-01 2012-01-01 false Environmental qualification of electric equipment... Regulatory Approvals § 50.49 Environmental qualification of electric equipment important to safety for...

Pacific Northwest Laboratory annual report for 1980 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health and safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baalman, R.W.; Hays, I.D.

1981-02-01

Pacific Northwest Laboratory's (PNL) 1980 annual report to the DOE Assistant Secretary for Environment describes research in environment, health, and safety conducted during fiscal year 1980. Part 5 includes technology assessments for natural gas, enhanced oil recovery, oil shale, uranium mining, magnetic fusion energy, solar energy, uranium enrichment and industrial energy utilization; regional analysis studies of environmental transport and community impacts; environmental and safety engineering for LNG, oil spills, LPG, shale oil waste waters, geothermal liquid waste disposal, compressed air energy storage, and nuclear/fusion fuel cycles; operational and environmental safety studies of decommissioning, environmental monitoring, personnel dosimetry, and analysis ofmore » criticality safety; health physics studies; and epidemiological studies. Also included are an author index, organization of PNL charts and distribution lists of the annual report, along with lists of presentations and publications. (DLS)« less

Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

USGS Publications Warehouse

Kunz, Bethany K.; Little, Edward E.

2015-01-01

Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

Safety and environmental health handbook

USGS Publications Warehouse

,

1989-01-01

This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

Analytical and environmental aspects of the flame retardant tetrabromobisphenol-A and its derivatives.

PubMed

Covaci, Adrian; Voorspoels, Stefan; Abdallah, Mohamed Abou-Elwafa; Geens, Tinne; Harrad, Stuart; Law, Robin J

2009-01-16

The present article reviews the available literature on the analytical and environmental aspects of tetrabromobisphenol-A (TBBP-A), a currently intensively used brominated flame retardant (BFR). Analytical methods, including sample preparation, chromatographic separation, detection techniques, and quality control are discussed. An important recent development in the analysis of TBBP-A is the growing tendency for liquid chromatographic techniques. At the detection stage, mass-spectrometry is a well-established and reliable technology in the identification and quantification of TBBP-A. Although interlaboratory exercises for BFRs have grown in popularity in the last 10 years, only a few participating laboratories report concentrations for TBBP-A. Environmental levels of TBBP-A in abiotic and biotic matrices are low, probably due to the major use of TBBP-A as reactive FR. As a consequence, the expected human exposure is low. This is in agreement with the EU risk assessment that concluded that there is no risk for humans concerning TBBP-A exposure. Much less analytical and environmental information exists for the various groups of TBBP-A derivatives which are largely used as additive flame retardants.

ASPECT

EPA Pesticide Factsheets

Able to deploy within one hour of notification, EPA's Airborne Spectral Photometric Environmental Collection Technology (ASPECT) is the nation’s only airborne real-time chemical and radiological detection, infrared and photographic imagery platform.

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

Manned space flight nuclear system safety. Volume 4: Space shuttle nuclear system transportation. Part 1: Space shuttle nuclear safety

NASA Technical Reports Server (NTRS)

1972-01-01

An analysis of the nuclear safety aspects (design and operational considerations) in the transport of nuclear payloads to and from earth orbit by the space shuttle is presented. Three representative nuclear payloads used in the study were: (1) the zirconium hydride reactor Brayton power module, (2) the large isotope Brayton power system and (3) small isotopic heat sources which can be a part of an upper stage or part of a logistics module. Reference data on the space shuttle and nuclear payloads are presented in an appendix. Safety oriented design and operational requirements were identified to integrate the nuclear payloads in the shuttle mission. Contingency situations were discussed and operations and design features were recommended to minimize the nuclear hazards. The study indicates the safety, design and operational advantages in the use of a nuclear payload transfer module. The transfer module can provide many of the safety related support functions (blast and fragmentation protection, environmental control, payload ejection) minimizing the direct impact on the shuttle.

Thermal and hydric aspects of environmental heterogeneity in the pitcher plant mosquito

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kingsolver, J.G.

1979-12-01

In an attempt to define environmental heteogeneity and uncertainty in a meaningful manner, thermal and hydric aspects of the microenvironment of the pitcher plant mosquito (Wyeomyia smithii) were studied. Mechanistic mass and energy balance models were developed to predict surface temperatures in a Sphagnum bog and temperatures and water losses in Sarracenia purpurea pitchers. Field tests indicate that the models predicted surface and pitcher temperatures within 2 to 3/sup 0/C, and hourly and daily water losses from pitchers to within 30%, using only basic meteorological data as inputs. Experiments and observations in a natural population of W. smithii in northernmore » Michigan, USA revealed significant differences in larval developmental rate, voltinism, and larval mortality due to microclimatic effects. The model predicts larval developmental rates and voltinism for each micmicroclimate within 10%. Water loss smulations predict, and field observations confirm, that pitcher desiccation is a function of microclimate and pitcher size, and that rainfall patterns on the order of 5 to 30 d determine desiccation patterns. Identification of the spatial and temporal scale of both the environment and the organismic (population) phenomena in question is crucial to constructing a meaningful definition of environmental heterogeneity. Thermal and hydric components of environmental variation may plan an important role in the maintenance of fitness variation in W. smithii. These results support the hypothesis of Istock (1978) that environmental uncertainty favors mixed life history strategies in Wyeomyia.« less

[Medical aspect of cosmonauts' safety during emergency landing. Respicere et prospicere].

PubMed

Barer, A S

2008-01-01

Participating in the comprehensive development of the system for safe emergency landing in space vehicles Voskhod and Soyuz, enterprise "Zvezda" undertook an extensive program of technical and physiological experiments with volunteers, including a group of physicians, in the interest of designing personal protection means for space crew. Over 130 physiological pile-engine experiments with the impact velocity of up to 9 m/s were performed between 1963 and 1967. The article presents medical and biomechanical analysis of the experimental data. The central part of the crew safety system in the event of emergency landing is a shock-absorbing seat with an individually molded support surface. This support surface ensures a uniform load distribution and also attenuates shock hardness by dint of own deformation. The Voskhod seat was outfitted with a pendulum hanger bracket on two shock-absorbers. The Soyuz seat has only one shock-absorber at the head end. The shock-absorber allows seat turns at high angular velocities and, consequently, appearance of additional mechanic and biomechanical reactions. The article attempts to analyze this phenomenon as well as the whole aggregate of human body responses onto the spacecraft impact with ground. To give readers the opportunity of independent conclusions from the data of the unlikely to be replicated experiments, the article is supplemented with graphs visualizing a larger part of the tests data, and their interpretations. It is aimed to help young specialists fill up the gap in knowledge about this medical aspect which remains of high topicality in many fields including safety of future piloted space programs.

Crime Prevention Through Environmental Design (CPTED) Characteristics Associated With Violence and Safety in Middle Schools.

PubMed

Vagi, Kevin J; Stevens, Mark R; Simon, Thomas R; Basile, Kathleen C; Carter, Sherry P; Carter, Stanley L

2018-04-01

This study used a new Crime Prevention Through Environmental Design (CPTED) assessment tool to test the associations between physical attributes of schools and violence-related behaviors and perceptions of students. Data were collected from 4717 students from 50 middle schools. Student perceptions of risk and safety, and violence were assessed. Evaluators used the CPTED School Assessment (CSA) to quantify how well the physical elements of each school correspond to ideal CPTED principles. Generalized linear mixed models were used to adjust for school- and student-level characteristics. Higher CSA scores were generally associated with higher perceptions of safety and lower levels of violence perpetration and perceived risk in unadjusted models. Higher CSA scores were also associated with lower odds of missing school because of safety concerns in most adjusted models, with significant adjusted odds ratios (AORs) ranging from 0.32 to 0.63. CSA scores for parking and bus loading areas also remained associated with higher perceived safety (AORs = 1.28 and 1.32, respectively) and lower perceived risk (AORs = 0.73 and 0.66, respectively) in adjusted models. The CSA is useful for assessing school environments that are associated with violence-related behaviors and perceptions. The CSA might help guide school environmental modifications to reduce violence. © 2018, American School Health Association.

Are Limits of Concern a useful concept to improve the environmental risk assessment of GM plants?

PubMed

Dolezel, Marion; Miklau, Marianne; Heissenberger, Andreas; Reichenbecher, Wolfram

2017-01-01

The European Food Safety Authority (EFSA) has introduced a concept for the environmental risk assessment of genetically modified (GM) plants which foresees the definition of ecological threshold values defining acceptable adverse effects of the GM plant on the environment (Limits of Concern, LoC). We analysed the LoC concept by scrutinising its feasibility with regard to important aspects of the environmental risk assessment. We then considered its relationship with protection goals, the comparative safety assessment and the stepwise testing approach. We finally discussed its usefulness for assessing long-term effects, effects on non-target organisms and species of conservation concern. The LoC concept is a possible approach to introduce ecological thresholds into environmental risk assessment in order to evaluate environmental harm. However, the concept leaves many important aspects open. Thresholds for environmental harm for protection goals need spatial and temporal differentiation from LoCs used for ERA indicators. Regionalisation of LoCs must be provided for as biodiversity levels and protection goals vary across the EU. Further guidance is needed with respect to the consequences, in case LoCs are exceeded and a link needs to be established between environmentally relevant results from the comparative safety assessment and the LoC concept. LoCs for long-term effects have to be evaluated by long-term monitoring. LoCs for non-target organisms need to be discriminated according to the species and parameters assessed. The overall LoC concept is considered useful if LoCs are further specified and differentiated. Although LoCs will finally be determined by political decisions, they should be based on scientific grounds in order to increase confidence in the conclusions on the safety of GM plants.

Workplace Safety: Indoor Environmental Quality

MedlinePlus

... Cleanup Tuberculosis Follow NIOSH Facebook Flickr Pinterest Twitter YouTube NIOSH Homepage NIOSH A-Z Workplace Safety & Health ... Cleanup Tuberculosis Follow NIOSH Facebook Flickr Pinterest Twitter YouTube NIOSH Homepage NIOSH A-Z Workplace Safety & Health ...

Sandia National Laboratories/New Mexico Environmental Information Document - Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

BAYLISS, LINDA S.; GUERRERO, JOSEPH V.; JOHNS, WILLIAM H.

This Sandia National Laboratories/New Mexico Environmental Information Document (EID) compiles information on the existing environment, or environmental baseline, for SNUNM. Much of the information is drawn from existing reports and databases supplemented by new research and data. The SNL/NM EID, together with the Sandia National Laboratories/New Mexico Facilities and Safety Information Document, provide a basis for assessing the environment, safety, and health aspects of operating selected facilities at SNL/NM. The environmental baseline provides a record of the existing physical, biological, and socioeconomic environment at SNL/NLM prior to being altered (beneficially or adversely) by proposed programs or projects. More specifically, themore » EID provides information on the following topics: Geology; Land Use; Hydrology and Water Resources; Air Quality and Meteorology; Ecology; Noise and Vibration; Cultural Resources; Visual Resources; Socioeconomic and Community Services; Transportation; Material Management; Waste Management; and Regulatory Requirements.« less

Review of health safety aspects of nanotechnologies in food production.

PubMed

Bouwmeester, Hans; Dekkers, Susan; Noordam, Maryvon Y; Hagens, Werner I; Bulder, Astrid S; de Heer, Cees; ten Voorde, Sandra E C G; Wijnhoven, Susan W P; Marvin, Hans J P; Sips, Adriënne J A M

2009-02-01

Due to new, previously unknown, properties attributed to engineered nanoparticles many new products are introduced in the agro-food area. Nanotechnologies cover many aspects, such as disease treatment, food security, new materials for pathogen detection, packaging materials and delivery systems. As with most new and evolving technologies, potential benefits are emphasized, while little is known on safety of the application of nanotechnologies in the agro-food sector. This review gives an overview of scientific issues that need to be addressed with priority in order to improve the risk assessment for nanoparticles in food. The following research topics are considered to contribute pivotally to risk assessment of nanotechnologies and nanoparticles in food products. Set a definition for NPs to facilitate regulatory discussions, prioritization of research and exchange of study results. Develop analytical tools for the characterization of nanoparticles in complex biological matrices like food. Establish relevant dose metrics for nanoparticles used for both interpretation of scientific studies as well as regulatory frameworks. Search for deviant behavior (kinetics) and novel effects (toxicity) of nanoparticles and assess the validity of currently used test systems following oral exposure. Estimate the consumer exposure to nanoparticles.

Environmental Management System Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, Robert; Thorson, Patrick; Horst, Blair

2009-03-24

. These DOE Orders and associated policies establish goals and sustainable stewardship practices that are protective of environmental, natural, and cultural resources, and take a life cycle approach that considers aspects such as: (1) Acquisition and use of environmentally preferable products; (2) Electronics stewardship; (3) Energy conservation, energy efficiency, and renewable energy; (4) Pollution prevention, with emphasis on toxic and hazardous chemical and material reduction; (5) Procurement of efficient energy and water consuming materials and equipment; (6) Recycling and reuse; (7) Sustainable and high-performance building design; (8) Transportation and fleet management; and (9) Water conservation. LBNL's approach to sustainable environmental stewardship required under Order 450.1A poses the challenge of implementing its EMS in a compliance-based, performance-based, and cost-effective manner. In other words, the EMS must deliver real and tangible business value at a minimal cost. The purpose of this plan is to describe Berkeley Lab's approach for achieving such an EMS, including an overview of the roles and responsibilities of key Laboratory parties. This approach begins with a broad-based environmental policy consistent with that stated in Chapter 11 of the LBNL Health and Safety Manual (PUB-3000). This policy states that Berkeley Lab is committed to the following: (1) Complying with applicable environmental, public health, and resource conservation laws and regulations. (2) Preventing pollution, minimizing waste, and conserving natural resources. (3) Correcting environmental hazards and cleaning up existing environmental problems, and (4) Continually improving the Laboratory's environmental performance while maintaining operational capability and sustaining the overall mission of the Laboratory. A continual cycle of planning, implementing, evaluating, and improving processes will be performed to achieve goals, objectives, and targets that will help LBNL carry out

Safety evaluation methodology for advanced coal extraction systems

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.

1981-01-01

Qualitative and quantitative evaluation methods for coal extraction systems were developed. The analysis examines the soundness of the design, whether or not the major hazards have been eliminated or reduced, and how the reduction would be accomplished. The quantitative methodology establishes the approximate impact of hazards on injury levels. The results are weighted by peculiar geological elements, specialized safety training, peculiar mine environmental aspects, and reductions in labor force. The outcome is compared with injury level requirements based on similar, safer industries to get a measure of the new system's success in reducing injuries. This approach provides a more detailed and comprehensive analysis of hazards and their effects than existing safety analyses.

Flexible Control of Safety Margins for Action Based on Environmental Variability.

PubMed

Hadjiosif, Alkis M; Smith, Maurice A

2015-06-17

To reduce the risk of slip, grip force (GF) control includes a safety margin above the force level ordinarily sufficient for the expected load force (LF) dynamics. The current view is that this safety margin is based on the expected LF dynamics, amounting to a static safety factor like that often used in engineering design. More efficient control could be achieved, however, if the motor system reduces the safety margin when LF variability is low and increases it when this variability is high. Here we show that this is indeed the case by demonstrating that the human motor system sizes the GF safety margin in proportion to an internal estimate of LF variability to maintain a fixed statistical confidence against slip. In contrast to current models of GF control that neglect the variability of LF dynamics, we demonstrate that GF is threefold more sensitive to the SD than the expected value of LF dynamics, in line with the maintenance of a 3-sigma confidence level. We then show that a computational model of GF control that includes a variability-driven safety margin predicts highly asymmetric GF adaptation between increases versus decreases in load. We find clear experimental evidence for this asymmetry and show that it explains previously reported differences in how rapidly GFs and manipulatory forces adapt. This model further predicts bizarre nonmonotonic shapes for GF learning curves, which are faithfully borne out in our experimental data. Our findings establish a new role for environmental variability in the control of action. Copyright © 2015 the authors 0270-6474/15/359106-16$15.00/0.

Regulatory aspects of oncology drug safety evaluation: past practice, current issues, and the challenge of new drugs.

PubMed

Rosenfeldt, Hans; Kropp, Timothy; Benson, Kimberly; Ricci, M Stacey; McGuinn, W David; Verbois, S Leigh

2010-03-01

The drug development of new anti-cancer agents is streamlined in response to the urgency of bringing effective drugs to market for patients with limited life expectancy. FDA's regulation of oncology drugs has evolved from the practices set forth in Arnold Lehman's seminal work published in the 1950s through the current drafting of a new International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) safety guidance for anti-cancer drug nonclinical evaluations. The ICH combines the efforts of the regulatory authorities of Europe, Japan, and the United States and the pharmaceutical industry from these three regions to streamline the scientific and technical aspects of drug development. The recent development of new oncology drug classes with novel mechanisms of action has improved survival rates for some cancers but also brings new challenges for safety evaluation. Here we present the legacy of Lehman and colleagues in the context of past and present oncology drug development practices and focus on some of the current issues at the center of an evolving harmonization process that will generate a new safety guidance for oncology drugs, ICH S9. The purpose of this new guidance will be to facilitate oncology drug development on a global scale by standardizing regional safety requirements.

Quality and safety aspects of meat products as affected by various physical manipulations of packaging materials.

PubMed

Lee, Keun Taik

2010-09-01

This article explores the effects of physically manipulated packaging materials on the quality and safety of meat products. Recently, innovative measures for improving quality and extending the shelf-life of packaged meat products have been developed, utilizing technologies including barrier film, active packaging, nanotechnology, microperforation, irradiation, plasma and far-infrared ray (FIR) treatments. Despite these developments, each technology has peculiar drawbacks which will need to be addressed by meat scientists in the future. To develop successful meat packaging systems, key product characteristics affecting stability, environmental conditions during storage until consumption, and consumers' packaging expectations must all be taken into consideration. Furthermore, the safety issues related to packaging materials must also be taken into account when processing, packaging and storing meat products.

Color Functionality Used in Visual Display for Occupational and Environmental Safety and Managing Color Vision Deficiency.

PubMed

Ochiai, Nobuhisa; Kondo, Hiroyuki

2017-01-01

The effects of color perception are utilized in visual displays for the purpose of safety in the workplace and in daily life. These effects, generally known as color functionality, are divided into four classifications: visibility, legibility, conspicuity and discriminability. This article focuses on the relationship between the color functionality of color schemes used in visual displays for occupational and environmental safety and color vision deficiency (particularly congenital red-green color deficiency), a critical issue in ophthalmology, and examines the effects of color functionality on the perception of the color red in individuals with protan defects. Due to abrupt system reforms, current Japanese clinical ophthalmology finds itself in a situation where it is insufficiently prepared to handle congenital red-green color deficiencies. Indeed, occupational problems caused by color vision deficiencies have been almost completely neglected, and are an occupational safety and health concern that will need to be solved in the future. This report will present the guidelines for the color vision testing established by the British Health and Safety Executive (HSE), a pioneering example of a model meant to solve these problems. Issues relating to the creation of guidelines adapted to Japanese clinical ophthalmology will also be examined, and we will discuss ways to utilize color functionality used in visual displays for occupational and environmental safety to help manage color vision deficiency.

The assessment of aesthetic and perceptual aspects within environmental impact assessment of renewable energy projects in Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolli, Michela, E-mail: michela.tolli@uniroma1.it; Recanatesi, Fabio, E-mail: fabio.rec@unitus.it; Piccinno, Matteo

The main aim of this paper is to explore how perceptual and aesthetic impact analyses are considered in Environmental Impact Assessment (EIA), with specific reference to Italian renewable energy projects. To investigate this topic, the paper starts by establishing which factors are linked with perceptual and aesthetic impacts and why it is important to analyze these aspects, which are also related to legislative provisions and procedures in Europe and in Italy. In particular the paper refers to renewable energy projects because environmental policies are encouraging more and more investment in this kind of primary resource. The growing interest in thismore » type of energy is leading to the realization of projects which change the governance of territories, with inevitable effects on the landscape from the aesthetic and perceptual points of view. Legislative references to EIA, including the latest directive regarding this topic show the importance of integrating the assessment of environmental and perceptual impacts, thus there is a need to improve EIA methodological approaches to this purpose. This paper proposes a profile of aesthetic and perceptual impact analysis in EIA for renewable energy projects in Italy, and concludes with recommendations as to how this kind of analysis could be improved. - Highlights: • We analyze 29 EIA Reports of Italian renewable energy projects. • We examine esthetic and perceptual aspects present in Italian EIA reports. • We identified inconsistency in use of methods for esthetic and perceptual aspects. • Local populations are rarely included as stakeholders in EIAs. • A shared understanding of perceptual and esthetic issues in EIA proceedings is required.« less

Latency features of SafetyNet ground systems architecture for the National Polar-orbiting Operational Environmental Satellite System (NPOESS)

NASA Astrophysics Data System (ADS)

Duda, James L.; Mulligan, Joseph; Valenti, James; Wenkel, Michael

2005-01-01

A key feature of the National Polar-orbiting Operational Environmental Satellite System (NPOESS) is the Northrop Grumman Space Technology patent-pending innovative data routing and retrieval architecture called SafetyNetTM. The SafetyNetTM ground system architecture for the National Polar-orbiting Operational Environmental Satellite System (NPOESS), combined with the Interface Data Processing Segment (IDPS), will together provide low data latency and high data availability to its customers. The NPOESS will cut the time between observation and delivery by a factor of four when compared with today's space-based weather systems, the Defense Meteorological Satellite Program (DMSP) and NOAA's Polar-orbiting Operational Environmental Satellites (POES). SafetyNetTM will be a key element of the NPOESS architecture, delivering near real-time data over commercial telecommunications networks. Scattered around the globe, the 15 unmanned ground receptors are linked by fiber-optic systems to four central data processing centers in the U. S. known as Weather Centrals. The National Environmental Satellite, Data and Information Service; Air Force Weather Agency; Fleet Numerical Meteorology and Oceanography Center, and the Naval Oceanographic Office operate the Centrals. In addition, this ground system architecture will have unused capacity attendant with an infrastructure that can accommodate additional users.

Safety aspects of lipidapheresis using DALI and MONET - Multicenter observational study.

PubMed

Kozik-Jaromin, Justyna; Röseler, Eberhard; Heigl, Franz; Spitthöver, Ralf; Ringel, Jens; Schmitz, Gerd; Heinzler, Rainer; Abdul-Rahman, Nadim; Leistikow, Frank; Himmelsbach, Frido; Schettler, Volker; Uhlenbusch-Körwer, Ingrid; Ramlow, Wolfgang

2017-11-01

Lipidapheresis was introduced for intractable hyperlipidemia as a more selective therapy than plasma exchange aiming to enhance efficacy and limit side-effects. Although this therapy is regarded safe, multicenter data from routine application are limited. We investigated direct adsorption of lipoproteins (DALI) and lipofiltration (MONET) regarding the short and the long-term safety aspects. This multicenter observational study prospectively evaluated 2154 DALI and 1297 MONET sessions of 122 patients during a period of 2 years. Safety parameters included clinical side-effects (adverse device effects, ADEs), technical complications, blood pressure and pulse rate. Also routinely performed laboratory parameters were documented. Analysis of laboratory parameters was not corrected for blood dilution. Overall 0.4% DALI and 0.5% MONET treatments were affected by ADE. Technical complications occurred in 2.1% and in 0.8% DALI and MONET sessions, respectively. The most frequent ADE was hypotension, and the majority of technical problems were related to vascular access. Both types of treatments led to a drop of thrombocytes in the range of 7-8%. Hematocrit and erythrocytes decreased only during the DALI treatments by about 6%. Leucocytes decreased during the DALI therapy (∼15%), whereas they increased during the MONET application (∼11%). MONET treatment was associated with a higher reduction of proteins (fibrinogen: 58% vs. 23%, albumin: 12% vs. 7%, CRP: 33% vs. 19% for MONET and DALI, respectively). Apart from severe thrombocytopenia in two DALI patients, changes of other parameters were typically transient. Under routine use the frequency of side-effects was low. Still, monitoring of blood count and proteins in chronic apheresis patients is recommended. Copyright © 2017. Published by Elsevier B.V.

Toxicity of Biologically Active Peptides and Future Safety Aspects: An Update.

PubMed

Khan, Fazlullah; Niaz, Kamal; Abdollahi, Mohammad

2018-02-18

Peptides are fragments of proteins with significant biological activities. These peptides are encoded in the protein sequence. Initially, such peptides are inactive in their parental form, unless proteolytic enzymes are released. These peptides then exhibit various functions and play a therapeutic role in the body. Besides the therapeutic and physiological activities of peptides, the main purpose of this study was to highlight the safety aspects of peptides. We performed an organized search of available literature using PubMed, Google Scholar, Medline, EMBASE, Reaxys and Scopus databases. All the relevant citations including research and review articles about the toxicity of biologically active peptides were evaluated and gathered in this study. Biological peptides are widely used in the daily routine ranging from food production to the cosmetics industry and also they have a beneficial role in the treatment and prevention of different diseases. These peptides are manufactured by both chemical and biotechnological techniques, which show negligible toxicity, however, some naturally occurring peptides and enzymes may induce high toxicity. Depending upon the demand and expected use in the food or pharmaceutical industry, we need different approaches to acertain the safety of these peptides preferentially through in silico methods. Intestinal wall disruption, erythrocytes and lymphocytes toxicity, free radical production, enzymopathic and immunopathic tissue damage and cytotoxicity due to the consumption of peptides are the main problems in the biological system that lead to various complicated disorders. Therefore, before considering biologically active peptides for food production and for therapeutic purpose, it is first necessary to evaluate the immunogenicity and toxicities of peptides. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Philosophical Aspects of Global Environmental Issues

ERIC Educational Resources Information Center

Lazutinaa, Tatyana V.; Baksheev, Vladimir N.

2016-01-01

The relevance of this paper is determined by understanding of global environmental problems in the context of social ecology. The purpose of this paper is the analysis of main modern environmental global problems created by the equipment representing a public and social basis for the practical transformation of public relations and also the…

Safety Aspects of Big Cryogenic Systems Design

NASA Astrophysics Data System (ADS)

Chorowski, M.; Fydrych, J.; Poliński, J.

2010-04-01

Superconductivity and helium cryogenics are key technologies in the construction of large scientific instruments, like accelerators, fusion reactors or free electron lasers. Such cryogenic systems may contain more than hundred tons of helium, mostly in cold and high-density phases. In spite of the high reliability of the systems, accidental loss of the insulation vacuum, pipe rupture or rapid energy dissipation in the cold helium can not be overlooked. To avoid the danger of over-design pressure rise in the cryostats, they need to be equipped with a helium relief system. Such a system is comprised of safety valves, bursting disks and optionally cold or warm quench lines, collectors and storage tanks. Proper design of the helium safety relief system requires a good understanding of worst case scenarios. Such scenarios will be discussed, taking into account different possible failures of the cryogenic system. In any case it is necessary to estimate heat transfer through degraded vacuum superinsulation and mass flow through the valves and safety disks. Even if the design of the helium relief system does not foresee direct helium venting into the environment, an occasional emergency helium spill may happen. Helium propagation in the atmosphere and the origins of oxygen-deficiency hazards will be discussed.

Knowledge, attitude and practice of aspects of laboratory safety in Pathology Laboratories at the University of Port Harcourt Teaching Hospital, Nigeria.

PubMed

Ejilemele, A A; Ojule, A C

2005-12-01

To assess current knowledge, attitudes and practice of aspects of laboratory safety in pathology laboratories at the University of Port Harcourt Teaching Hospital in view of perceived inadequacies in safety practices in clinical laboratories in developing countries. Sixty (60) self- administered questionnaires were distributed to all cadres of staff in four (4) different laboratories (Chemical Pathology, Haematology, Blood bank and Medical Microbiology) at the Hospital. Gross deficiencies were found in the knowledge, attitudes and practice of laboratory safety by laboratory staff in areas of use of personal protective equipment, specimen collection and processing, centrifuge--related hazards, infective hazards waste disposal and provision and use of First Aid Kits. Issues pertaining to laboratory safety are not yet given adequate attention by both employers and employees in developing countries in this ear of resurgence of diseases such as HIV/AIDS and Hepatitis Band C, is emphasized.

Attention-deficit hyperactivity disorder medication use: factors involved in prescribing, safety aspects and outcomes.

PubMed

Martinez-Raga, Jose; Ferreros, Amparo; Knecht, Carlos; de Alvaro, Raquel; Carabal, Eloisa

2017-03-01

While treatment of patients with attention-deficit hyperactivity disorder (ADHD) is based on a multimodal approach that combines medication with specific psychological interventions, pharmacotherapy alone is generally considered an essential and cost-effective element. This paper aims to comprehensively and critically review factors involved in prescribing and medication use in individuals diagnosed with ADHD, focusing on the difficulties facing patients with ADHD seeking treatment, as well as the safety and tolerability aspects of ADHD pharmacotherapies, with particular attention on the cardiovascular adverse events and the potential risk of misuse or diversion of ADHD medications. A comprehensive and systematic literature search of PubMed/MEDLINE database was conducted to identify studies published in peer-reviewed journals until 1 August 2016. Children, adolescents and adults often encounter significant difficulties in the process of accessing specialist assessment and treatment for ADHD as a consequence of disparities in service organization and available treatment provision. Despite the well-established efficacy and overall safety profile, ADHD medications are not exempt from adverse events. The cardiovascular safety of pharmacotherapies used for treating individuals with ADHD has raised particular concerns; however there is little evidence of serious cardiovascular adverse events, including no serious corrected QT (QTc) abnormalities associated with stimulants, atomoxetine or α2-adrenergic receptor agonists. Although the abuse of prescription stimulant drugs, particularly, short-acting stimulants is a prevalent and growing problem, nonmedical use of prescription stimulants within the clinical context is very limited. In addition, nonstimulant ADHD medications lack any reinforcing effects and consequently any abuse potential.

Convoy Active Safety Technology - Environmental Understanding and Navigation With Use of Low Cost Sensors

DTIC Science & Technology

2012-08-01

ACTIVE SAFETY TECHNOLOGY – ENVIRONMENTAL UNDERSTANDING AND NAVIGATION WITH USE OF LOW COST SENSORS David Simon Lockheed Martin MFC, Grand Prairie, TX...Understanding and Navigation with use of low cost sensors 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) David Simon ; Bernard

Advances in analytical technologies for environmental protection and public safety.

PubMed

Sadik, O A; Wanekaya, A K; Andreescu, S

2004-06-01

Due to the increased threats of chemical and biological agents of injury by terrorist organizations, a significant effort is underway to develop tools that can be used to detect and effectively combat chemical and biochemical toxins. In addition to the right mix of policies and training of medical personnel on how to recognize symptoms of biochemical warfare agents, the major success in combating terrorism still lies in the prevention, early detection and the efficient and timely response using reliable analytical technologies and powerful therapies for minimizing the effects in the event of an attack. The public and regulatory agencies expect reliable methodologies and devices for public security. Today's systems are too bulky or slow to meet the "detect-to-warn" needs for first responders such as soldiers and medical personnel. This paper presents the challenges in monitoring technologies for warfare agents and other toxins. It provides an overview of how advances in environmental analytical methodologies could be adapted to design reliable sensors for public safety and environmental surveillance. The paths to designing sensors that meet the needs of today's measurement challenges are analyzed using examples of novel sensors, autonomous cell-based toxicity monitoring, 'Lab-on-a-Chip' devices and conventional environmental analytical techniques. Finally, in order to ensure that the public and legal authorities are provided with quality data to make informed decisions, guidelines are provided for assessing data quality and quality assurance using the United States Environmental Protection Agency (US-EPA) methodologies.

Ship breaking or scuttling? A review of environmental, economic and forensic issues for decision support.

PubMed

Devault, Damien A; Beilvert, Briac; Winterton, Peter

2017-11-01

In a globalized world, the world trade fleet plays a pivotal role in limiting transport costs. But, the management of obsolete ships is an acute problem, with most Ship Recycling Facilities (SRF) situated in developing countries. They are renowned for their controversial work and safety conditions and their environmental impact. Paradoxically, dismantlement is paid for by the shipowners in accordance with international conventions therefore it is more profitable for them to sell off ships destined for scrapping. Scuttling, the alternative to scrapping, is assessed in the present review to compare the cost/benefit ratios of the two approaches. Although scrapping provides employment and raw materials - but with environmental, health and safety costs - scuttling provides fisheries and diving tourism opportunities but needs appropriate management to avoid organic and metal pollution, introduction of invasive species and exacerbation of coastal erosion. It is also limited by appropriate bottom depth, ship type and number. The present review inventories the environmental, health, safety, economic, and forensic aspects of each alternative.

Interagency Nuclear Safety Review Panel: Biomedical and Environmental Effects Subpanel report for Galileo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anspaugh, L.R.; Blanton, J.O.; Bollinger, L.J.

1989-10-01

This report of the Biomedical and Environmental Effects Subpanel (BEES) of the Interagency Nuclear Safety Review Panel (INSRP), for the Galileo space mission addresses the possible radiological consequences of postulated accidents that release radioactivity into the environment. This report presents estimates of the consequences and uncertainties given that the source term is released into the environment. 10 refs., 6 tabs.

An innovative approach to interdisciplinary occupational safety and health education.

PubMed

Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

2011-07-01

The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

Protection and Safety.

ERIC Educational Resources Information Center

American School Board Journal, 1964

1964-01-01

Several aspects of school safety and protection are presented for school administrators and architects. Among those topics discussed are--(1) life safety, (2) vandalism controlled through proper design, (3) personal protective devices, and (4) fire alarm systems. Another critical factor in providing a complete school safety program is proper…

Portable Bio/Chemosensoristic Devices: Innovative Systems for Environmental Health and Food Safety Diagnostics.

PubMed

Dragone, Roberto; Grasso, Gerardo; Muccini, Michele; Toffanin, Stefano

2017-01-01

This mini-review covers the newly developed biosensoristic and chemosensoristic devices described in recent literature for detection of contaminants in both environmental and food real matrices. Current needs in environmental and food surveillance of contaminants require new simplified, sensitive systems, which are portable and allow for rapid and on-site monitoring and diagnostics. Here, we focus on optical and electrochemical bio/chemosensoristic devices as promising tools with interesting analytical features that can be potentially exploited for innovative on-site and real-time applications for diagnostics and monitoring of environmental and food matrices (e.g., agricultural waters and milk). In near future, suitably developed and implemented bio/chemosensoristic devices will be a new and modern technological solution for the identification of new quality and safety marker indexes as well as for a more proper and complete characterization of abovementioned environmental and food matrices. Integrated bio/chemosensoristic devices can also allow an "holistic approach" that may prove to be more suitable for diagnostics of environmental and food real matrices, where the copresence of more bioactive substances is frequent. Therefore, this approach can be focused on the determination of net effect (mixture effect) of bioactive substances present in real matrices.

The influence of environmental conditions on safety management in hospitals: a qualitative study.

PubMed

Alingh, Carien W; van Wijngaarden, Jeroen D H; Huijsman, Robbert; Paauwe, Jaap

2018-05-02

Hospitals are confronted with increasing safety demands from a diverse set of stakeholders, including governmental organisations, professional associations, health insurance companies, patient associations and the media. However, little is known about the effects of these institutional and competitive pressures on hospital safety management. Previous research has shown that organisations generally shape their safety management approach along the lines of control- or commitment-based management. Using a heuristic framework, based on the contextually-based human resource theory, we analysed how environmental pressures affect the safety management approach used by hospitals. A qualitative study was conducted into hospital care in the Netherlands. Five hospitals were selected for participation, based on organisational characteristics as well as variation in their reputation for patient safety. We interviewed hospital managers and staff with a central role in safety management. A total of 43 semi-structured interviews were conducted with 48 respondents. The heuristic framework was used as an initial model for analysing the data, though new codes emerged from the data as well. In order to ensure safe care delivery, institutional and competitive stakeholders often impose detailed safety requirements, strong forces for compliance and growing demands for accountability. As a consequence, hospitals experience a decrease in the room to manoeuvre. Hence, organisations increasingly choose a control-based management approach to make sure that safety demands are met. In contrast, in case of more abstract safety demands and an organisational culture which favours patient safety, hospitals generally experience more leeway. This often results in a stronger focus on commitment-based management. Institutional and competitive conditions as well as strategic choices that hospitals make have resulted in various combinations of control- and commitment-based safety management. A balanced

Clean Air Program : summary assessment of the safety, health, environmental and system risks of alternative fuel

DOT National Transportation Integrated Search

1995-08-01

This is a handbook of safety, health, and the environmental issues of the production, bulk transport, and bult storage of alternative fuels with emphasis on transport and storage. Fuels included are: 1) compressed natural gas, 2) liquefied natural ga...

The 1997 JANNAF Propellant Development and Characterization Subcommittee and Safety and Environmental Protection Subcommittee Joint Meeting

NASA Technical Reports Server (NTRS)

Cocchiaro, James E. (Editor); Filliben, Jeff D. (Editor); Watson, Anne H. (Editor)

1997-01-01

In the Propellant Development and Characterization Subcommittee (PDCS) meeting, topics included: the analysis, characterization, and processing of propellants and propellant ingredients; chemical reactivity; liquid propellants; test methods; rheology; surveillance and aging; and process engineering. In the Safety and Environmental Protection Subcommittee (S&EPS) meeting, topics covered included: hydrazine propellant vapor detection methods; toxicity of propellants and propellants; explosives safety; atmospheric modeling and risk assessment of toxic releases; reclamation, disposal, and demilitarization methods; and remediation of explosives or propellant contaminated sites.

How technology megatrends are shaping the future of safety, health, and environmental monitoring.

PubMed

Brauch, Rob

2015-05-01

The Safety, Health and Environmental professional will soon be able to choose from a wider number of solutions that incorporate the latest developments in electronics, cellular and wireless communication, sensors, and software, all of which are driven by and are essential components of three "megatrends"--IoT, Big Data, and Social Networking. This will fundamentally alter the way in which we go about collecting information for risk assessment, exposure assessment, and thus how we implement better and more cost-effective solutions for protecting workers' lives and well-being. The more we become aware of these trends and developments, the better we will be able to integrate them into our sampling strategies and analysis methods, which creates greater value from our daily work as safety and health professionals.

Better Science Through Safety.

ERIC Educational Resources Information Center

Gerlovich, Jack A.; Downs, Gary E.

Following a brief description of the major components found effective in school safety programs (safety management, education, and services) and data on school accidents in Iowa, this book addresses various aspects of safety related to science instruction, emphasizing that responsibility for safety must be shared by both teacher and students.…

Health, Safety, and Environment Division

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wade, C

1992-01-01

The primary responsibility of the Health, Safety, and Environmental (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting these responsibilities requires expertise in many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in HSE Division often stem from thesemore » applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The results of these programs help develop better practices in occupational health and safety, radiation protection, and environmental science.« less

Crime Prevention through Environmental Design (CPTED) Characteristics Associated with Violence and Safety in Middle Schools

ERIC Educational Resources Information Center

Vagi, Kevin J.; Stevens, Mark R.; Simon, Thomas R.; Basile, Kathleen C.; Carter, Sherry P.; Carter, Stanley L.

2018-01-01

Background: This study used a new Crime Prevention Through Environmental Design (CPTED) assessment tool to test the associations between physical attributes of schools and violence-related behaviors and perceptions of students. Methods: Data were collected from 4717 students from 50 middle schools. Student perceptions of risk and safety, and…

Safety aspects of cryochamber operation

NASA Astrophysics Data System (ADS)

Chorowski, M.; Piotrowska, A.; Sieron, A.; Stanek, A.

2014-01-01

Local and whole body cryotherapy is well recognized, developed and appreciated both from medical and technical point of view. Poland is a country with a highest number of medical cryochambers in operation (above 200) and more than 3 millions of whole body cryotherapeutic sessions have been performed since 1989. Cryogenic temperatures applied for whole-body apart from medical effects have also significant influence on patient's psyche. A number of cryochambers is constantly increasing in hospitals, sport centers and spas. A temperature inside a cryochamber should be below 150 K. To achieve and stabilize such low temperature, either cascade compressor unit or liquid cryogens evaporation (N2 or synthetic air) are used. This paper presents safety oriented review of cryochamber design and constructions.

Long-Term Marine Traffic Monitoring for Environmental Safety in the Aegean Sea

NASA Astrophysics Data System (ADS)

Giannakopoulos, T.; Gyftakis, S.; Charou, E.; Perantonis, S.; Nivolianitou, Z.; Koromila, I.; Makrygiorgos, A.

2015-04-01

The Aegean Sea is characterized by an extremely high marine safety risk, mainly due to the significant increase of the traffic of tankers from and to the Black Sea that pass through narrow straits formed by the 1600 Greek islands. Reducing the risk of a ship accident is therefore vital to all socio-economic and environmental sectors. This paper presents an online long-term marine traffic monitoring work-flow that focuses on extracting aggregated vessel risks using spatiotemporal analysis of multilayer information: vessel trajectories, vessel data, meteorological data, bathymetric / hydrographic data as well as information regarding environmentally important areas (e.g. protected high-risk areas, etc.). A web interface that enables user-friendly spatiotemporal queries is implemented at the frontend, while a series of data mining functionalities extracts aggregated statistics regarding: (a) marine risks and accident probabilities for particular areas (b) trajectories clustering information (c) general marine statistics (cargo types, etc.) and (d) correlation between spatial environmental importance and marine traffic risk. Towards this end, a set of data clustering and probabilistic graphical modelling techniques has been adopted.

Environmental safety review of methoprene and bacterially-derived pesticides commonly used for sustained mosquito control.

PubMed

Lawler, Sharon P

2017-05-01

Some pesticides are applied directly to aquatic systems to reduce numbers of mosquito larvae (larvicides) and thereby reduce transmission of pathogens that mosquitoes vector to humans and wildlife. Sustained, environmentally-safe control of larval mosquitoes is particularly needed for highly productive waters (e.g., catchment basins, water treatment facilities, septic systems), but also for other habitats to maintain control and reduce inspection costs. Common biorational pesticides include the insect juvenile hormone mimic methoprene and pesticides derived from the bacteria Bacillus thuringiensis israelensis, Lysinibacillus sphaericus and Saccharopolyspora spinosa (spinosad). Health agencies, the public and environmental groups have especially debated the use of methoprene because some studies have shown toxic effects on non-target organisms. However, many studies have demonstrated its apparent environmental safety. This review critically evaluates studies pertinent to the environmental safety of using methoprene to control mosquito larvae, and provides concise assessments of the bacterial larvicides that provide sustained control of mosquitoes. The review first outlines the ecological and health effects of mosquitoes, and distinguishes between laboratory toxicity and environmental effects. The article then interprets non-target toxicity findings in light of measured environmental concentrations of methoprene (as used in mosquito control) and field studies of its non-target effects. The final section evaluates information on newer formulations of bacterially-derived pesticides for sustained mosquito control. Results show that realized environmental concentrations of methoprene were usually 2-5µg/kg (range 2-45µg/kg) and that its motility is limited. These levels were not toxic to the vast majority of vertebrates and invertebrates tested in laboratories, except for a few species of zooplankton, larval stages of some other crustaceans, and small Diptera. Studies

Complying with Executive Order 13148 using the Enterprise Environmental Safety And Occupational Health Management Information System.

PubMed

McFarland, Michael J; Nelson, Tim M; Rasmussen, Steve L; Palmer, Glenn R; Olivas, Arthur C

2005-03-01

All U.S. Department of Defense (DoD) facilities are required under Executive Order (EO) 13148, "Greening the Government through Leadership in Environmental Management," to establish quality-based environmental management systems (EMSs) that support environmental decision-making and verification of continuous environmental improvement by December 31, 2005. Compliance with EO 13148 as well as other federal, state, and local environmental regulations places a significant information management burden on DoD facilities. Cost-effective management of environmental data compels DoD facilities to establish robust database systems that not only address the complex and multifaceted environmental monitoring, record-keeping, and reporting requirements demanded by these rules but enable environmental management decision-makers to gauge improvements in environmental performance. The Enterprise Environmental Safety and Occupational Health Management Information System (EESOH-MIS) is a new electronic database developed by the U.S. Air Force to manage both the data needs associated with regulatory compliance programs across its facilities as well as the non-regulatory environmental information that supports installation business practices. The U.S. Air Force, which has adopted the Plan-Do-Check-Act methodology as the EMS standard that it will employ to address EO 13148 requirements.

Safety aspects of cryochamber operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chorowski, M.; Piotrowska, A.; Sieron, A.

Local and whole body cryotherapy is well recognized, developed and appreciated both from medical and technical point of view. Poland is a country with a highest number of medical cryochambers in operation (above 200) and more than 3 millions of whole body cryotherapeutic sessions have been performed since 1989. Cryogenic temperatures applied for whole-body apart from medical effects have also significant influence on patient's psyche. A number of cryochambers is constantly increasing in hospitals, sport centers and spas. A temperature inside a cryochamber should be below 150 K. To achieve and stabilize such low temperature, either cascade compressor unit ormore » liquid cryogens evaporation (N{sub 2} or synthetic air) are used. This paper presents safety oriented review of cryochamber design and constructions.« less

Assessment of research and development (R and D) needs in LPG safety and environmental control

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeSteese, J.G.

1982-05-01

The report characterizes the LPG industry covering all operations from production to end use, reviews current knowledge of LPG release phenomenology, summarizes the status of current LPG release prevention and control methodology, and identifies any remaining safety and environmental problems and recommends R and D strategies that may mitigate these problems. (ACR)

Portable Bio/Chemosensoristic Devices: Innovative Systems for Environmental Health and Food Safety Diagnostics

PubMed Central

Dragone, Roberto; Grasso, Gerardo; Muccini, Michele; Toffanin, Stefano

2017-01-01

This mini-review covers the newly developed biosensoristic and chemosensoristic devices described in recent literature for detection of contaminants in both environmental and food real matrices. Current needs in environmental and food surveillance of contaminants require new simplified, sensitive systems, which are portable and allow for rapid and on-site monitoring and diagnostics. Here, we focus on optical and electrochemical bio/chemosensoristic devices as promising tools with interesting analytical features that can be potentially exploited for innovative on-site and real-time applications for diagnostics and monitoring of environmental and food matrices (e.g., agricultural waters and milk). In near future, suitably developed and implemented bio/chemosensoristic devices will be a new and modern technological solution for the identification of new quality and safety marker indexes as well as for a more proper and complete characterization of abovementioned environmental and food matrices. Integrated bio/chemosensoristic devices can also allow an “holistic approach” that may prove to be more suitable for diagnostics of environmental and food real matrices, where the copresence of more bioactive substances is frequent. Therefore, this approach can be focused on the determination of net effect (mixture effect) of bioactive substances present in real matrices. PMID:28529937

Biophysical aspects of human thermoregulation during heat stress.

PubMed

Cramer, Matthew N; Jay, Ollie

2016-04-01

Humans maintain a relatively constant core temperature through the dynamic balance between endogenous heat production and heat dissipation to the surrounding environment. In response to metabolic or environmental disturbances to heat balance, the autonomic nervous system initiates cutaneous vasodilation and eccrine sweating to facilitate higher rates of dry (primarily convection and radiation) and evaporative transfer from the body surface; however, absolute heat losses are ultimately governed by the properties of the skin and the environment. Over the duration of a heat exposure, the cumulative imbalance between heat production and heat dissipation leads to body heat storage, but the consequent change in core temperature, which has implications for health and safety in occupational and athletic settings particularly among certain clinical populations, involves a complex interaction between changes in body heat content and the body's morphological characteristics (mass, surface area, and tissue composition) that collectively determine the body's thermal inertia. The aim of this review is to highlight the biophysical aspects of human core temperature regulation by outlining the principles of human energy exchange and examining the influence of body morphology during exercise and environmental heat stress. An understanding of the biophysical factors influencing core temperature will enable researchers and practitioners to better identify and treat individuals/populations most vulnerable to heat illness and injury during exercise and extreme heat events. Further, appropriate guidelines may be developed to optimize health, safety, and work performance during heat stress. Copyright © 2016 Elsevier B.V. All rights reserved.

Regulatory aspects on the use of fish embryos in environmental toxicology.

PubMed

Halder, Marlies; Léonard, Marc; Iguchi, Taisen; Oris, James T; Ryder, Kathy; Belanger, Scott E; Braunbeck, Thomas A; Embry, Michelle R; Whale, Graham; Norberg-King, Teresa; Lillicrap, Adam

2010-07-01

Animal alternative tests are gaining serious consideration in an array of environmental sciences, particularly as they relate to sound management of chemicals and wastewater discharges. The ILSI Health and Environmental Sciences Institute and the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) held an International Workshop on the Application of the Fish Embryo Test in March, 2008. This relatively young discipline is following advances in animal alternatives for human safety sciences, and it is advisable to develop a broad comparison of how animal alternative tests involving fish are viewed in a regulatory context over a wide array of authorities or advising bodies. These include OECD, Western Europe, North America, and Japan. This paper summarizes representative practices from these regions. Presently, the global regulatory environment has varying stances regarding the protection of fish for use as an experimental animal. Such differences have a long-term potential to lead to a lack of harmony in approaches to fish toxicity testing, especially for chemicals in commerce across multiple geographic regions. Implementation of alternative methods and approaches will be most successful if accepted globally, including methods of fish toxicity testing. An important area for harmonization would be in the interpretation of protected and nonprotected life stages of fish. Use of fish embryos represent a promising alternative and allow bridging to more technically challenging alternatives with longer prospective timelines, including cell-based assays, ecotoxicogenomics, and QSARs. (c) 2010 SETAC.

78 FR 49735 - Intent To Prepare a Draft Environmental Impact Statement for Dam Safety Study, Lake Lewisville...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... determine appropriate permanent methods for correcting potential problems, interim risk reduction measures... Environmental Impact Statement for Dam Safety Study, Lake Lewisville Dam, Elm Fork Trinity River, Denton County... primary purposes of the project are flood risk management, [[Page 49736

Legal issues of the environmental safety regulation in the sphere of nanotechnology in Russian Federation

NASA Astrophysics Data System (ADS)

Belokrylova, Ekaterina A.

2013-04-01

Nowadays one of the principal innovative spheres in Russia is considered to be a rapid development of nanotechnology and nanomaterials and implementation its products into almost all fields of social and industrial life. Nevertheless, despite the pointed advantages an appearance of nano products has set not only a positive example of the scientific progress development and dynamics, but also a potential threat of possible risks for the environment and people's health in the case of its massive use when there is a lack of research about its impacts. In Russian Federation the problem of nanosafety regulation is extremely actual. A number of international documents have noted a lack of legal regulation in the sphere of nanotechnologies in Russian Federation. Thus, according to the strategic EU program, it's mentioned that in 2009 on an annual meeting of OECD Tour de Table Meeting in Paris (November, 2007) Russia took responsibility to develop a long term program of nanoindustry development by 2015 (Nanotechnology Action Plan for Russia-2015). The key role should be dedicated to the nanosafety aspects and potential risk assessment of nanomaterials for environment and humans' health. Unfortunately, until now Russia did not provide this document for discussion at the international level by the partners of nanoconsortcium. Indeed, from 2007 until nowadays in Russian Federation there are no a single federal act of legislation (federal'nyi zakon), establishing the state foundations of regulation of nanosafety. The only one Federeal Legal Act in the described sphere is the Federalniy Zakon from 19 July 2007 "About the Russian corporation of nanotechnologies", which has established the principles of organization, activites, functions and termination of Rosnanotech. However, there are no articles dedicated to the environmental safety provision in regards of nano products applications. Also there is no complex federal act consolidating legal status of action in the field of

Program Environmental Assurance: Shuttle Environmental Assurance and the Future

NASA Technical Reports Server (NTRS)

Glover, Steve E.

2008-01-01

Material availability continues to be impacted by domestic and international environmental health and safety (EH&S) regulations, industrial pollution prevention goals and related vendor economics. SEA is an integrated team that works to identify, communicate and address safety and environmentally driven materials obsolescence issues and pollution prevention opportunities.

TITLE: Environmental, health, and safety issues offuel cells in transportation. Volume 1: Phosphoricacid fuel-cell buses

NASA Astrophysics Data System (ADS)

Ring, Shan

1994-12-01

The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase 1 of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, through a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase 3. After completing Phase 2, DOE plans a comprehensive performance testing program (Phase H1) to verify that the buses meet stringent transit industry requirements. The Phase 3 study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on these issues. The study examines health and safety together because they are integrally related. In addition, this report briefly discusses two environmental issues that are of concern to the Environmental Protection Agency (EPA). The first issue involves a surge battery used by the PAFC bus that contains hazardous constituents. The second issue concerns the regulated air emissions produced during operation of the PAFC bus.

Addressing prehospital patient safety using the science of injury prevention and control.

PubMed

Meisel, Zachary F; Hargarten, Stephen; Vernick, Jon

2008-01-01

There is inadequate information about the scope and character of adverse events in prehospital care. However, there is ample evidence to suggest that prehospital patient safety hazards are often unique and underrecognized. We first summarize what is currently understood about prehospital patient safety and identify the specific aspects of emergency medical services (EMS) care that may make conventional approaches to the evaluation and improvement of patient safety more difficult. Next we introduce the concept of using injury prevention and control science to analyze prehospital adverse events and to help develop EMS patient safety solutions. Injury prevention and control is a proven public health approach for the study and reduction of both intentional and unintentional injuries. It includes the use of a Haddon phase-factor matrix to identify possible interventions, especially environmental modifications that provide automatic protection. We demonstrate how this method can be used as a complementary approach in efforts to prevent injuries caused by prehospital adverse medical events.

Safety in the Physics Laboratory

ERIC Educational Resources Information Center

Bullen, Brother T. G.

1974-01-01

Briefly defines the legal aspects of safety. Presents prominent safety hazards and procedures that should be followed when dealing with electricity, radioactive materials, lasers, poisons, and vacuum apparatus. (GS)

76 FR 11079 - Oil and Gas and Sulphur Operations in the Outer Continental Shelf-Safety and Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

... DEPARTMENT OF THE INTERIOR Bureau of Ocean Energy Management, Regulation and Enforcement 30 CFR Part 250 [Docket ID: BOEM-2010-0076] Oil and Gas and Sulphur Operations in the Outer Continental Shelf--Safety and Environmental Management Systems; Public Workshop AGENCY: Bureau of Ocean Energy Management...

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What are the basic safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

Environmental, Ethical and Safety Issues in Chemistry/Science Curricula in Papua New Guinea Provincial High Schools

ERIC Educational Resources Information Center

Palmer, W. P.

1986-01-01

Chemistry occupies only a small portion of the Papua New Guinea science curriculum in grades seven to ten. Science itself occupies only a small proportion of the total curriculum. Nevertheless the existing syllabus, and previous and planned future revisions of it, give considerable prominence to environmental, health and safety issues. There is a…

A strategic management model for evaluation of health, safety and environmental performance.

PubMed

Abbaspour, Majid; Toutounchian, Solmaz; Roayaei, Emad; Nassiri, Parvin

2012-05-01

Strategic health, safety, and environmental management system (HSE-MS) involves systematic and cooperative planning in each phase of the lifecycle of a project to ensure that interaction among the industry group, client, contractor, stakeholder, and host community exists with the highest level of health, safety, and environmental standard performances. Therefore, it seems necessary to assess the HSE-MS performance of contractor(s) by a comparative strategic management model with the aim of continuous improvement. The present Strategic Management Model (SMM) has been illustrated by a case study and the results show that the model is a suitable management tool for decision making in a contract environment, especially in oil and gas fields and based on accepted international standards within the framework of management deming cycle. To develop this model, a data bank has been created, which includes the statistical data calculated by converting the HSE performance qualitative data into quantitative values. Based on this fact, the structure of the model has been formed by defining HSE performance indicators according to the HSE-MS model. Therefore, 178 indicators have been selected which have been grouped into four attributes. Model output provides quantitative measures of HSE-MS performance as a percentage of an ideal level with maximum possible score for each attribute. Defining the strengths and weaknesses of the contractor(s) is another capability of this model. On the other hand, this model provides a ranking that could be used as the basis for decision making at the contractors' pre-qualification phase or during the execution of the project.

Health, safety, and environmental management system operation in contracting companies: A case study.

PubMed

Nassiri, Parvin; Yarahmadi, Rasoul; Gholami, Pari Shafaei; Hamidi, Abdolamir; Mirkazemi, Roksana

2016-05-03

Systematic and cooperative interactions among parent industry and contractors are necessary for a successful health, safety, and environmental management system (HSE-MS). This study was conducted to evaluate the HSE-MS performance in contracting companies in one of the petrochemical industries in Iran during 2013. Managers of parent and contracting companies participated in this study. The data collection forms included 7 elements of an integrated HSE-MS (leadership and commitment; policy and strategic objectives; organization, resources, and documentation; evaluation and risk management; planning; implementation and monitoring; auditing and reviewing). The results showed that mean percentage of the total scores in seven elements of HSE-MS was 85.7% and 87.0% based on self-report and report of parent company, respectively. In conclusion, this study showed that HSE-MS was desirably functioning; however, improvement to ensure health and safety of workers is still required.

Hanford Site Environmental Safety and Health Fiscal Year 2001 Budget-Risk management summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

REEP, I.E.

1999-05-12

The Hanford Site Environment, Safety and Health (ES&H) Budget-Risk Management Summary report is prepared to support the annual request to sites in the U.S. Department of Energy (DOE) Complex by DOE, Headquarters. The request requires sites to provide supplementary crosscutting information related to ES&H activities and the ES&H resources that support these activities. The report includes the following: (1) A summary status of fiscal year (FY) 1999 ES&H performance and ES&H execution commitments; (2)Status and plans of Hanford Site Office of Environmental Management (EM) cleanup activities; (3) Safety and health (S&H) risk management issues and compliance vulnerabilities of FY 2001more » Target Case and Below Target Case funding of EM cleanup activities; (4) S&H resource planning and crosscutting information for FY 1999 to 2001; and (5) Description of indirect-funded S&H activities.« less

Environmental Health and Safety Hazards Experienced by Home Health Care Providers: A Room-by-Room Analysis.

PubMed

Polivka, Barbara J; Wills, Celia E; Darragh, Amy; Lavender, Steven; Sommerich, Carolyn; Stredney, Donald

2015-11-01

The number of personnel providing in-home health care services is increasing substantially. The unique configuration of environmental hazards in individual client homes has a significant impact on the safety and health of home health care providers (HHPs). This mixed-methods study used data from a standardized questionnaire, focus groups, and individual interviews to explore environmental health and safety hazards encountered by HHPs in client homes. The participant sample (N = 68) included nurses, aides, therapists, and owners/managers from a variety of geographic locations. The most often-reported hazards were trip/slip/lift hazards, biohazards, and hazards from poor air quality, allergens, pests and rodents, and fire and burns. Frequency of identified key hazards varied by room, that is, kitchen (e.g., throw rugs, water on floor), bathroom (e.g., tight spaces for client handling), bedroom (e.g., bed too low), living room (e.g., animal waste), and hallway (e.g., clutter). Findings indicate the need for broader training to enable HHPs to identify and address hazards they encounter in client homes. © 2015 The Author(s).

Health, safety and environmental risk of a gas pipeline in an oil exploring area of Gachsaran.

PubMed

Kalatpoor, Omid; Goshtasp, Kambiz; Khavaji, Solieman

2011-01-01

The purpose of this study was assessing health, safety and environmental risk of a gas transfer pipeline in an oily area of Gachsaran. In this method, we used the Kent's pipeline risk assessment method except that to facilitate using the method more practically some changes were exerted into Kent's method. A pipeline with 16 kilometers length was selected considering surrounding nature of the pipeline. It was divided into two sections. Analogous to Kent's method, in this method, parameters included: interested party's injuries, corrosion, design factor, incorrect operation index and consequence scoring. The difference here was that for consequence scoring we used ALOHA 5.6 software instead of Kent's pattern. Results showed that health, safety and environmental risks of section 2 (the next 13 kilometers of outgoing pipeline from gas station after the first 3 kilometers) were greater. It seems the main cause of gaining a bigger risk number was related to more activities of interested parties around section 2. Because all figures gathered from indexes are almost close to gather except third parties activity.

Role of a quality management system in improving patient safety - laboratory aspects.

PubMed

Allen, Lynn C

2013-09-01

The aim of this study is to describe how implementation of a quality management system (QMS) based on ISO 15189 enhances patient safety. A literature review showed that several European hospitals implemented a QMS based on ISO 9001 and assessed the impact on patient safety. An Internet search showed that problems affecting patient safety have occurred in a number of laboratories across Canada. The requirements of a QMS based on ISO 15189 are outlined, and the impact of the implementation of each requirement on patient safety is summarized. The Quality Management Program - Laboratory Services in Ontario is briefly described, and the experience of Ontario laboratories with Ontario Laboratory Accreditation, based on ISO 15189, is outlined. Several hospitals that implemented ISO 9001 reported either a positive impact or no impact on patient safety. Patient safety problems in Canadian laboratories are described. Implementation of each requirement of the QMS can be seen to have a positive effect on patient safety. Average laboratory conformance on Ontario Laboratory Accreditation is very high, and laboratories must address and resolve any nonconformities. Other standards, practices, and quality requirements may also contribute to patient safety. Implementation of a QMS based on ISO 15189 provides a solid foundation for quality in the laboratory and enhances patient safety. It helps to prevent patient safety issues; when such issues do occur, effective processes are in place for investigation and resolution. Patient safety problems in Canadian laboratories might have been prevented had effective QMSs been in place. Ontario Laboratory Accreditation has had a positive impact on quality in Ontario laboratories. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Environmental Studies and Environmental Careers. ERIC/CSMEE Digest.

ERIC Educational Resources Information Center

Heimlich, Joe E.

Increased concern with the environment has increased opportunities for employment in the environmental job market. This digest helps clarify the meaning of environmental employment and discusses aspects of its present state. An examination of trends in environmental employment indicates a growing demand for new jobs in environmental fields created…

Green Synthesis of Nanomaterials: Environmental Aspects

EPA Science Inventory

There is always a search for reliable and environmentally friendly processes to manufacture metal and metal oxide nanoparticles minimizing or even eliminating the use of hazardous chemicals. The only way to develop these “green” processes is to adapt benign synthesis approaches t...

CHEMISTRY FOR THE SAFETY MAN. SAFETY IN INDUSTRY--ENVIRONMENTAL AND CHEMICAL HAZARDS SERVICES.

ERIC Educational Resources Information Center

CESTRONE, PATRICK F.

THIS BULLETIN, ONE OF A SERIES ON SAFETY IN INDUSTRY, IS INTENDED TO PROVIDE THE BACKGROUND WHICH WILL ENABLE THE SAFETY MAN TO UNDERSTAND SOME OF THE PRINCIPLES APPLIED IN CONTROLLING CHEMICAL HAZARDS. IT WAS PREPARED IN THE OFFICE OF OCCUPATIONAL SAFETY, DIVISION OF PROGRAMING AND RESEARCH, BUREAU OF LABOR STANDARDS. TOPICS INCLUDE (1) WHAT IS…

Safety climate in the federal fire management community: Influences of organizational, environmental, group, and individual characteristics (Abstract)

Treesearch

Brooke Baldauf McBride; Anne E. Black

2012-01-01

This study examined the effects of organizational, environmental, group and individual characteristics on five components of safety climate in the US federal fire management community (HRO Practices, Leadership, Group Culture, Learning Orientation and Mission Clarity). Multiple analyses of variance revealed that all types of characteristics had a significant effect on...

Environmental Management.

ERIC Educational Resources Information Center

Bandhu, Desh, Ed.

The Indian Environmental Society, in association with the International Programme on Environmental Management Education, organized two seminars on World Environment Day and Environmental Impact Assessment during June 1980. A large number of papers on various aspects of environmental management were presented during the seminars. The papers…

Missouri Secondary Science Safety Manual.

ERIC Educational Resources Information Center

Lemons, Judith L.

The purpose of this safety manual is to provide a resource to help manage and minimize potential risks in science classrooms where students spend up to 60% of instructional time engaged in hands-on activities. This manual contains information on standards, legal aspects, and responsibilities for science safety; general laboratory safety for…

Identifying organizational cultures that promote patient safety.

PubMed

Singer, Sara J; Falwell, Alyson; Gaba, David M; Meterko, Mark; Rosen, Amy; Hartmann, Christine W; Baker, Laurence

2009-01-01

Safety climate refers to shared perceptions of what an organization is like with regard to safety, whereas safety culture refers to employees' fundamental ideology and orientation and explains why safety is pursued in the manner exhibited within a particular organization. Although research has sought to identify opportunities for improving safety outcomes by studying patterns of variation in safety climate, few empirical studies have examined the impact of organizational characteristics such as culture on hospital safety climate. This study explored how aspects of general organizational culture relate to hospital patient safety climate. In a stratified sample of 92 U.S. hospitals, we sampled 100% of senior managers and physicians and 10% of other hospital workers. The Patient Safety Climate in Healthcare Organizations and the Zammuto and Krakower organizational culture surveys measured safety climate and group, entrepreneurial, hierarchical, and production orientation of hospitals' culture, respectively. We administered safety climate surveys to 18,361 personnel and organizational culture surveys to a 5,894 random subsample between March 2004 and May 2005. Secondary data came from the 2004 American Hospital Association Annual Hospital Survey and Dun & Bradstreet. Hierarchical linear regressions assessed relationships between organizational culture and safety climate measures. Aspects of general organizational culture were strongly related to safety climate. A higher level of group culture correlated with a higher level of safety climate, but more hierarchical culture was associated with lower safety climate. Aspects of organizational culture accounted for more than threefold improvement in measures of model fit compared with models with controls alone. A mix of culture types, emphasizing group culture, seemed optimal for safety climate. Safety climate and organizational culture are positively related. Results support strategies that promote group orientation and

Improving the safety of street-vended food.

PubMed

Moy, G; Hazzard, A; Käferstein, F

1997-01-01

An integrated plan of action for improving street food involving health and other regulatory authorities, vendors and consumers should address not only food safety, but also environmental health management, including consideration of inadequate sanitation and waste management, possible environmental pollution, congestion and disturbances to traffic. However, WHO cautions that, in view of their importance in the diets of urban populations, particularly the socially disadvantaged, every effort should be made to preserve the benefits provided by varied, inexpensive and often nutritious street food. Therefore, authorities concerned with street food management must balance efforts aimed at reducing the negative aspects on the environment with the benefits of street food and its important role in the community. Health authorities charged with responsibility for food safety control should match risk management action to the level of assessed risk. The rigorous application of codes and enforcement of regulations more suited to larger and permanent food service establishments is unlikely to be justifiable. Such rigorous application of codes and regulations may result in disappearance of the trade with consequent aggravation of hunger and malnutrition. Moreover, most codes and regulations have not been based on any systematic identification and assessment of health hazards associated with different types of foods and operations as embodied in the HACCP approach which has been recognized by Codex as the most cost-effective means for promoting food safety. WHO encourages the development of regulations that empower vendors to take greater responsibility for the preparation of safe food, and of codes of practice based on the HACCP system.

Health, safety, and environmental risk assessment of steel production complex in central Iran using TOPSIS.

PubMed

Jozi, S A; Majd, N Moradi

2014-10-01

This research was carried out with the aim of presenting an environmental management plan for steel production complex (SPC) in central Iran. Following precise identification of the plant activities as well as the study area, possible sources of environmental pollution and adverse impacts on the air quality, water, soil, biological environment, socioeconomic and cultural environment, and health and safety of the employees were determined considering the work processes of the steel complex. Afterwards, noise, wastewater, and air pollution sources were measured. Subsequently, factors polluting the steel complex were identified by TOPSIS and then prioritized using Excel Software. Based on the obtained results, the operation of the furnaces in hot rolling process with the score 1, effluent derived from hot rolling process with the score 0.565, nonprincipal disposal and dumping of waste at the plant enclosure with the score 0.335, walking beam process with the score 1.483 respectively allocated themselves the highest priority in terms of air, water, soil and noise pollution. In terms of habitats, land cover and socioeconomic and cultural environment, closeness to the forest area and the existence of four groups of wildlife with the score 1.106 and proximity of villages and residential areas to the plant with the score 3.771 respectively enjoyed the highest priorities while impressibility and occupational accidents with the score 2.725 and cutting and welding operations with score 2.134 had the highest priority among health and safety criteria. Finally, strategies for the control of pollution sources were identified and Training, Monitoring and environmental management plan of the SPC was prepared.

Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability. OECD Workshop

USDA-ARS?s Scientific Manuscript database

This Special Issue of Bioresource Technology is dedicated to selected contributions presented at the international Workshop: “Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability,” held 2-4 April, 2008, in Florence, South Carolina (US...

Transgenic maize event TC1507: Global status of food, feed, and environmental safety

PubMed Central

Baktavachalam, Gajendra B; Delaney, Bryan; Fisher, Tracey L; Ladics, Gregory S; Layton, Raymond J; Locke, Mary EH; Schmidt, Jean; Anderson, Jennifer A; Weber, Natalie N; Herman, Rod A; Evans, Steven L

2015-01-01

Maize (Zea mays) is a widely cultivated cereal that has been safely consumed by humans and animals for centuries. Transgenic or genetically engineered insect-resistant and herbicide-tolerant maize, are commercially grown on a broad scale. Event TC1507 (OECD unique identifier: DAS-Ø15Ø7–1) or the Herculex®# I trait, an insect-resistant and herbicide-tolerant maize expressing Cry1F and PAT proteins, has been registered for commercial cultivation in the US since 2001. A science-based safety assessment was conducted on TC1507 prior to commercialization. The safety assessment addressed allergenicity; acute oral toxicity; subchronic toxicity; substantial equivalence with conventional comparators, as well as environmental impact. Results from biochemical, physicochemical, and in silico investigations supported the conclusion that Cry1F and PAT proteins are unlikely to be either allergenic or toxic to humans. Also, findings from toxicological and animal feeding studies supported that maize with TC1507 is as safe and nutritious as conventional maize. Maize with TC1507 is not expected to behave differently than conventional maize in terms of its potential for invasiveness, gene flow to wild and weedy relatives, or impact on non-target organisms. These safety conclusions regarding TC1507 were acknowledged by over 20 regulatory agencies including United States Environment Protection Agency (US EPA), US Department of Agriculture (USDA), Canadian Food Inspection Agency (CFIA), and European Food Safety Authority (EFSA) before authorizing cultivation and/or food and feed uses. A comprehensive review of the safety studies on TC1507, as well as some benefits, are presented here to serve as a reference for regulatory agencies and decision makers in other countries where authorization of TC1507 is or will be pursued. PMID:26018138

Transgenic maize event TC1507: Global status of food, feed, and environmental safety.

PubMed

Baktavachalam, Gajendra B; Delaney, Bryan; Fisher, Tracey L; Ladics, Gregory S; Layton, Raymond J; Locke, Mary Eh; Schmidt, Jean; Anderson, Jennifer A; Weber, Natalie N; Herman, Rod A; Evans, Steven L

2015-01-01

Maize (Zea mays) is a widely cultivated cereal that has been safely consumed by humans and animals for centuries. Transgenic or genetically engineered insect-resistant and herbicide-tolerant maize, are commercially grown on a broad scale. Event TC1507 (OECD unique identifier: DAS-Ø15Ø7-1) or the Herculex®(#) I trait, an insect-resistant and herbicide-tolerant maize expressing Cry1F and PAT proteins, has been registered for commercial cultivation in the US since 2001. A science-based safety assessment was conducted on TC1507 prior to commercialization. The safety assessment addressed allergenicity; acute oral toxicity; subchronic toxicity; substantial equivalence with conventional comparators, as well as environmental impact. Results from biochemical, physicochemical, and in silico investigations supported the conclusion that Cry1F and PAT proteins are unlikely to be either allergenic or toxic to humans. Also, findings from toxicological and animal feeding studies supported that maize with TC1507 is as safe and nutritious as conventional maize. Maize with TC1507 is not expected to behave differently than conventional maize in terms of its potential for invasiveness, gene flow to wild and weedy relatives, or impact on non-target organisms. These safety conclusions regarding TC1507 were acknowledged by over 20 regulatory agencies including United States Environment Protection Agency (US EPA), US Department of Agriculture (USDA), Canadian Food Inspection Agency (CFIA), and European Food Safety Authority (EFSA) before authorizing cultivation and/or food and feed uses. A comprehensive review of the safety studies on TC1507, as well as some benefits, are presented here to serve as a reference for regulatory agencies and decision makers in other countries where authorization of TC1507 is or will be pursued.

HSE's safety assessment principles for criticality safety.

PubMed

Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

2008-06-01

The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf).

Environmental Sciences Division annual progress report for period ending September 30, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-04-01

The Environmental Sciences Division (ESD) of Oak Ridge National Laboratory (ORNL) conducts research on the environmental aspects of existing and emerging energy systems and applies this information to ensure that technology development and energy use are consistent with national environmental health and safety goals. Offering an interdisciplinary resource of staff and facilities to address complex environmental problems, the division is currently providing technical leadership for major environmental issues of national concern: (1) acidic deposition and related environmental effects, (2) effects of increasing concentrations of atmospheric CO{sub 2} and the resulting climatic changes to ecosystems and natural and physical resources, (3)more » hazardous chemical and radioactive waste disposal and remediation research and development, and (4) development of commercial biomass energy production systems. This progress report outlines ESD's accomplishments in these and other areas in FY 1990. Individual reports are processed separately for the data bases in the following areas: ecosystem studies; environmental analyses; environmental toxicology; geosciences; technical and administrative support; biofuels feedstock development program; carbon dioxide information analysis and research program; and environmental waste program.« less

Maintaining a Quality Environmental Health & Safety Program.

ERIC Educational Resources Information Center

Otto, Ann K.; And Others

1994-01-01

The college or university human resources department's responsibilities in assuring a healthy and safe environment are enumerated. First, issues to be considered in school safety are outlined, and then the role of the health and safety officer is discussed. A sample job description and list of duties are included. (MSE)

Toxicity testing of leachate from waste landfills using medaka (Oryzias latipes) for monitoring environmental safety.

PubMed

Osaki, Kae; Kashiwada, Shosaku; Tatarazako, Norihisa; Ono, Yoshiro

2006-06-01

To investigate the environmental safety of waste disposal landfill sites and of land reclaimed from such sites, we evaluated the toxicity of leachate from these sites by a combination of bioassays in the Japanese killifish medaka Oryzias latipes. We tested for lethal toxicity in adult and larval medaka and for hatching inhibition of embryos from eggs. As biochemical evidence of the effects of leachate exposure, CYP1A (EROD activity) and vitellogenin (Vtg) were induced. We also bioassayed water-treated leachate and downstream river water. Leachate solution was lethal to larval and adult medaka. Embryo hatchability was inhibited, and abnormal hatching, spinal deformity and anisophthalmia occurred in embryos exposed to leachate solution. CYP1A was induced by exposure to leachate solution diluted to 1.0%, and EROD activity was significantly higher than in control. Vtg and unknown proteins were induced in the sera of male medaka exposed to the diluted leachate solution. Conventional water treatments worked effectively to remove toxic compounds but did not work well to remove element ions, including heavy metals. Treated leachate produced neither lethal toxicity nor hatching abnormalities during the exposure period. Fish toxicity tests for leachate would be useful for monitoring the environmental safety of landfill sites.

Nuclear Powerplant Safety: Operations.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC. Nuclear Energy Office.

Powerplant systems and procedures that ensure the day-to-day health and safety of people in and around the plant is referred to as operational safety. This safety is the result of careful planning, good engineering and design, strict licensing and regulation, and environmental monitoring. Procedures that assure operational safety at nuclear…

MEMS sensor technologies for human centred applications in healthcare, physical activities, safety and environmental sensing: a review on research activities in Italy.

PubMed

Ciuti, Gastone; Ricotti, Leonardo; Menciassi, Arianna; Dario, Paolo

2015-03-17

Over the past few decades the increased level of public awareness concerning healthcare, physical activities, safety and environmental sensing has created an emerging need for smart sensor technologies and monitoring devices able to sense, classify, and provide feedbacks to users' health status and physical activities, as well as to evaluate environmental and safety conditions in a pervasive, accurate and reliable fashion. Monitoring and precisely quantifying users' physical activity with inertial measurement unit-based devices, for instance, has also proven to be important in health management of patients affected by chronic diseases, e.g., Parkinson's disease, many of which are becoming highly prevalent in Italy and in the Western world. This review paper will focus on MEMS sensor technologies developed in Italy in the last three years describing research achievements for healthcare and physical activity, safety and environmental sensing, in addition to smart systems integration. Innovative and smart integrated solutions for sensing devices, pursued and implemented in Italian research centres, will be highlighted, together with specific applications of such technologies. Finally, the paper will depict the future perspective of sensor technologies and corresponding exploitation opportunities, again with a specific focus on Italy.

MEMS Sensor Technologies for Human Centred Applications in Healthcare, Physical Activities, Safety and Environmental Sensing: A Review on Research Activities in Italy

PubMed Central

Ciuti, Gastone; Ricotti, Leonardo; Menciassi, Arianna; Dario, Paolo

2015-01-01

Over the past few decades the increased level of public awareness concerning healthcare, physical activities, safety and environmental sensing has created an emerging need for smart sensor technologies and monitoring devices able to sense, classify, and provide feedbacks to users’ health status and physical activities, as well as to evaluate environmental and safety conditions in a pervasive, accurate and reliable fashion. Monitoring and precisely quantifying users’ physical activity with inertial measurement unit-based devices, for instance, has also proven to be important in health management of patients affected by chronic diseases, e.g., Parkinson’s disease, many of which are becoming highly prevalent in Italy and in the Western world. This review paper will focus on MEMS sensor technologies developed in Italy in the last three years describing research achievements for healthcare and physical activity, safety and environmental sensing, in addition to smart systems integration. Innovative and smart integrated solutions for sensing devices, pursued and implemented in Italian research centres, will be highlighted, together with specific applications of such technologies. Finally, the paper will depict the future perspective of sensor technologies and corresponding exploitation opportunities, again with a specific focus on Italy. PMID:25808763

Assessment of environmental health and safety issues associated with the commercialization of unconventional gas recovery: methane from coal seams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ethridge, L.J.; Cowan, C.E.; Riedel, E.F.

1980-07-01

Potential public health and safety problems and the potential environmental impacts from the recovery of gas from coalbeds are identified and examined. The technology of methane recovery is described and economic and legal barriers to production are discussed. (ACR)

Safety climate in the US federal wildland fire management community: influences of organizational, environmental, group, and individual characteristics

Treesearch

Anne E. Black; Brooke Baldauf McBride

2013-01-01

This study examined the effects of organisational, environmental, group and individual characteristics on five components of safety climate (High Reliability Organising Practices, Leadership, Group Culture, Learning Orientation and Mission Clarity) in the US federal wildland fire management community. Of particular interest were differences between perceptions based on...

Environmental, health, and safety issues of fuel cells in transportation. Volume 1: Phosphoric acid fuel-cell buses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ring, S

1994-12-01

The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase I of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, throughmore » a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase III. After completing Phase II, DOE plans a comprehensive performance testing program (Phase HI) to verify that the buses meet stringent transit industry requirements. The Phase III study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on these issues. The study examines health and safety together because they are integrally related. In addition, this report briefly discusses two environmental issues that are of concern to the Environmental Protection Agency (EPA). The first issue involves a surge battery used by the PAFC bus that contains hazardous constituents. The second issue concerns the regulated air emissions produced during operation of the PAFC bus.« less

Annual Safety Education Review 1970.

ERIC Educational Resources Information Center

American Association for Health, Physical Education, and Recreation, Washington, DC.

This booklet presents articles completed in 1970 by the Division of Safety Education of the American Association for Health, Physical Education, and Recreation. The 11 articles deal with the following topics: a) the problem of apathy in safety education, b) the safety aspects of archery and riflery, c) weight training for high school girls, d)…

Environmental Epigenetics and a Unified Theory of the Molecular Aspects of Evolution: A Neo-Lamarckian Concept that Facilitates Neo-Darwinian Evolution.

PubMed

Skinner, Michael K

2015-04-26

Environment has a critical role in the natural selection process for Darwinian evolution. The primary molecular component currently considered for neo-Darwinian evolution involves genetic alterations and random mutations that generate the phenotypic variation required for natural selection to act. The vast majority of environmental factors cannot directly alter DNA sequence. Epigenetic mechanisms directly regulate genetic processes and can be dramatically altered by environmental factors. Therefore, environmental epigenetics provides a molecular mechanism to directly alter phenotypic variation generationally. Lamarck proposed in 1802 the concept that environment can directly alter phenotype in a heritable manner. Environmental epigenetics and epigenetic transgenerational inheritance provide molecular mechanisms for this process. Therefore, environment can on a molecular level influence the phenotypic variation directly. The ability of environmental epigenetics to alter phenotypic and genotypic variation directly can significantly impact natural selection. Neo-Lamarckian concept can facilitate neo-Darwinian evolution. A unified theory of evolution is presented to describe the integration of environmental epigenetic and genetic aspects of evolution. © The Author(s) 2015. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Practical management of chemicals and hazardous wastes: An environmental and safety professional`s guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhre, W.L.

This book was written to help the environmental and safety student learn about the field and to help the working professional manage hazardous material and waste issues. For example, one issue that will impact virtually all of these people mentioned is the upcoming environmental standardization movement. The International Standards Organization (ISO) is in the process of adding comprehensive environmental and hazardous waste management systems to their future certification requirements. Most industries worldwide will be working hard to achieve this new level of environmental management. This book presents many of the systems needed to receive certification. In order to properly managemore » hazardous waste, it is important to consider the entire life cycle, including when the waste was a useful chemical or hazardous material. Waste minimization is built upon this concept. Understanding the entire life cycle is also important in terms of liability, since many regulations hold generators responsible from cradle to grave. This book takes the life-cycle concept even further, in order to provide additional insight. The discussion starts with the conception of the chemical and traces its evolution into a waste and even past disposal. At this point the story continues into the afterlife, where responsibility still remains.« less

Safety and health concerns in forestry operations

Treesearch

Robert B. Rummer

1997-01-01

The author discusses several safety models, including the "Three E?s": engineering, education, and enforcement; the Heinrich-Lateiner model; the organizational model; and the behavioral safety model. Rummer encourages approaching safety from a broader perspective, enabling the industry to track changes in all aspects and to keep leading the safety target....

In vitro dosimetry modeling will be a critical step toward efficient assessment of engineered nanomaterials for environmental health and safety

EPA Science Inventory

Presentation Description: The development and application of engineered nanomaterials (ENM) into commercial and consumer products is far outpacing the ability of traditional approaches to evaluate the potential implications for environmental health and safety. This problem recen...

Safety inspection of plant products

USDA-ARS?s Scientific Manuscript database

Advances in hyperspectral imaging technology have provided enormous opportunity for the food industry and research community to develop rapid and non-invasive inspection methods for food safety inspection. This chapter reviews and discusses different aspects of using this technology in safety inspec...

Operationalising the health aspects of sustainable diets: a review.

PubMed

Mertens, Elly; Van't Veer, Pieter; Hiddink, Gerrit J; Steijns, Jan Mjm; Kuijsten, Anneleen

2017-03-01

Shifting towards a more sustainable food consumption pattern is an important strategy to mitigate climate change. In the past decade, various studies have optimised environmentally sustainable diets using different methodological approaches. The aim of the present review was to categorise and summarise the different approaches to operationalise the health aspects of environmentally sustainable diets. Conventional keyword and reference searches were conducted in PubMed, Scopus, Web of Knowledge and CAB Abstracts. Inclusion criteria were: (i) English-language publication; (ii) published between 2005 and October 2015; (iii) dietary data collected for the diet as a whole at the national, household or individual level; (iv) comparison of the current diet with dietary scenarios; and (v) for results to consider the health aspect in some way. Consumer diets. Adult population. We reviewed forty-nine studies that combined the health and environmental aspects of consumer diets. Hereby, five approaches to operationalise the health aspect of the diet were identified: (i) food item replacements; (ii) dietary guidelines; (iii) dietary quality scores; (iv) diet modelling techniques; and (v) diet-related health impact analysis. Although the sustainability concept is increasingly popular and widely advocated by nutritional and environmental scientists, the journey towards designing sustainable diets for consumers has only just begun. In the context of operationalising the health aspects, diet modelling might be considered the preferred approach since it captures the complexity of the diet as a whole. For the future, we propose SHARP diets: environmentally Sustainable (S), Healthy (H), Affordable (A), Reliable (R) and Preferred from the consumer's perspective (P).

WNA's worldwide overview on front-end nuclear fuel cycle growth and health, safety and environmental issues.

PubMed

Saint-Pierre, Sylvain; Kidd, Steve

2011-01-01

This paper presents the WNA's worldwide nuclear industry overview on the anticipated growth of the front-end nuclear fuel cycle from uranium mining to conversion and enrichment, and on the related key health, safety, and environmental (HSE) issues and challenges. It also puts an emphasis on uranium mining in new producing countries with insufficiently developed regulatory regimes that pose greater HSE concerns. It introduces the new WNA policy on uranium mining: Sustaining Global Best Practices in Uranium Mining and Processing-Principles for Managing Radiation, Health and Safety and the Environment, which is an outgrowth of an International Atomic Energy Agency (IAEA) cooperation project that closely involved industry and governmental experts in uranium mining from around the world. Copyright © 2010 Health Physics Society

[Preclinical evaluation of the safety of biotechnology products: specific aspects].

PubMed

Descotes, Jacques; Ravel, Guillaume; Vial, Thierry

2003-01-01

Biotechnology-derived products represent a class of increasingly numerous drugs. One of their major characteristics is extreme diversity, which requires specific approaches for the preclinical evaluation of their safety. The selection of relevant animal species is not easy, as most of these products are human-specific. Thus, only one species will often be used, i.e. primates. As most of these products are large molecules, they can be directly immunogenic. When they are human-specific, no animal model is available to predict the risk. Many biotechnology-derived products have an expected influence on the immune system. This must be taken into account in the preclinical strategy of immunotoxicity evaluation that is now required for every new drug. As conventional toxicity testing is generally limited, safety pharmacology studies should include more than the core battery of assays required by current guidelines in order to complement missing data as much as possible. Because of these particularities, a comprehensive investigation of metabolism and pharmacokinetics is not usually needed. Some products can cross-react with cellular components not intended as therapeutic targets. It is, therefore, essential to rule out the risk of possible cross-reactions that can result in adverse effects. Finally, viral safety is a crucial component of the preclinical safety evaluation of these products. Overall, biotechnology-derived products raise specific issues because of their innovative and original characteristics, and it is difficult to address all these issues if not by using a case-by-case approach.

Safety and Liability Aspects of Solar Power Satellites

NASA Astrophysics Data System (ADS)

Jakhu, Ram S.; Howard, Diane

2010-09-01

It is an undisputed fact that the global need for energy will grow exponentially in the future and the search for alternative energy sources will intensify. One alternative source will be space based solar power(SSP), to be collected in space and transmitted to Earth by solar power satellites(SPS). As the appropriate technology becomes proven, the economic and operational viability for the launch of SPS system(s) will, to a large extent, depend upon favorable political and legal determinants. One of such determinants relates to safety risks and possible liability of the operator(s) of SPS system(s). This paper identifies safety risks of, and analyses liability for, damage caused by SPS. Issues, specifically analyzed mainly under international law, include damage caused(in outer space, in the air and on the Earth) by electronic transmission, and mechanisms to manage liability including inter alia insurance coverage, waivers of liability, and dispute settlement mechanisms. The paper contains recommendations for the concerned governments(and their respective private entities) to take regulatory precautions in order to avoid the risks of possible liability and thereby enhances the chances for launch and operation of SPS system(s).

Teaching Safety: Using Mole Calculations To Teach Aspects of Safety in Post-16 Chemistry.

ERIC Educational Resources Information Center

Borrows, Peter; Vincent, Ray; Cochrane, Allen

1998-01-01

Recommends beginning certain chemistry courses with revision and consolidation of mole calculations. Argues that by choosing examples related to health and safety, mole calculations can be made less academic while raising student awareness of important issues. (DDR)

Fruit and vegetable consumption - the influence of aspects associated with trust in food and safety and quality of food.

PubMed

Taylor, Anne W; Coveney, John; Ward, Paul R; Henderson, Julie; Meyer, Samantha B; Pilkington, Rhiannon; Gill, Tiffany K

2012-02-01

To profile adults who eat less than the recommended servings of fruit and vegetables per day. Australia-wide population telephone survey on a random sample of the Australian population, with results analysed by univariate and multivariate models. Australia. One thousand one hundred and eight interviews, respondents' (49·3 % males) mean age was 45·12 (sd 17·63) years. Overall 54·8 % and 10·7 % were eating the recommended number of servings of fruit and vegetables. Variables included in the multivariate model indicating low fruit consumption included gender, age, employment, education and those who were less likely to consider the safety and quality of food as important. In regard to low vegetable consumption, people who were more likely to do the food shopping only 'some of the time' and have a high level of trust in groups of people such as immediate family, neighbours, doctors and different levels of government were included in the final model. They were also less likely to neither consider the safety and quality of food as important nor trust organisations/institutions such as the press, television and politicians. In the final model depicting both low fruit and low vegetable servings, sex, age and a low level of importance with regard to safety and quality of food were included. To increase fruit and vegetable consumption, research into a broad range of determinants associated with behaviours should be coupled with a deeper understanding of the process associated with changing behaviours. While levels of trust are related to behaviour change, knowledge and attitudes about aspects associated with safety and quality of food are also of importance.

Office of River Protection Integrated Safety Management System Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

CLARK, D.L.

Revision O was never issued. Finding safe and environmentally sound methods of storage and disposal of 54 million gallons of highly radioactive waste contained in 177 underground tanks is the largest challenge of Hanford cleanup. TWRS was established in 1991 and continues to integrate all aspects of the treatment and management of the high-level radioactive waste tanks. In fiscal Year 1997, program objectives were advanced in a number of areas. RL TWRS refocused the program toward retrieving, treating, and immobilizing the tank wastes, while maintaining safety as first priority. Moving from a mode of storing the wastes to getting themore » waste out of the tanks will provide the greatest cleanup return on the investment and eliminate costly mortgage continuance. There were a number of safety-related achievements in FY1997. The first high priority safety issue was resolved with the removal of 16 tanks from the ''Wyden Watch List''. The list, brought forward by Senator Ron Wyden of Oregon, identified various Hanford safety issues needing attention. One of these issues was ferrocyanide, a chemical present in 24 tanks. Although ferrocyanide can ignite at high temperature, analysis found that the chemical has decomposed into harmless compounds and is no longer a concern.« less

Alaska Humans Factors Safety Study: The Southern Coastal Area

NASA Technical Reports Server (NTRS)

Chappell, Sheryl L.; Reynard, William (Technical Monitor)

1995-01-01

At the request of the Alaska Air Carriers Association, researchers from the NASA Aviation Safety Reporting System, at NASA Ames Research Center, conducted a study on aspects of safety in Alaskan Part 135 air taxi operations. An interview form on human factors safety issues was created by a representative team from the FAA-Alaska, NTSB-Alaska, NASA-ASRS, and representatives of the Alaska Air Carriers Association which was subsequently used in the interviews of pilots and managers. Because of the climate and operational differences, the study was broken into two geographical areas, the southern coastal areas and the northern portion of the state. This presentation addresses the southern coastal areas, specifically: Anchorage, Dillingham, King Salmon, Kodiak, Cold Bay, Juneau, and Ketchikan. The interview questions dealt with many of the potential pressures on pilots and managers associated with the daily air taxi operations in Alaska. The impact of the environmental factors such as the lack of available communication, navigation and weather information systems was evaluated. The results of this study will be used by government and industry working in Alaska. These findings will contribute important information on specific Alaska safety issues for eventual incorporation into training materials and policies that will help to assure the safe conduct of air taxi flights in Alaska.

Overview of Federal, New York State, and New York City Law Regarding Environmental Health and Safety in Schools.

ERIC Educational Resources Information Center

Advocates for Children of New York, Inc., Long Island City.

This document presents many of the federal, state, and New York City laws that apply to the health, safety, and environmental conditions of schools. The relevant portions of the law have been selected along with the mechanisms of legal enforcement that may exist and contact information where applicable. Legislative categories covered include air…

Economic and environmental aspects of STOL transportation

NASA Technical Reports Server (NTRS)

Stewart, E. C.

1972-01-01

A system study to analyze the question of the impact of advanced STOL aircraft in meeting the needs of short-haul air transportation systems is discussed. The study is concerned with the following aspects: (1) service to the passenger, (2) economic viability, and (3) economic criteria to include community noise, ground and air decongestion, and air pollution. The STOL aircraft parameters are defined. Preliminary conclusions concerning the feasibility of short-haul air transportation are presented.

Environmental and economic aspects of water kiosks: Case study of a medium-sized Italian town

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torretta, Vincenzo, E-mail: vincenzo.torretta@uninsubria.it

2013-05-15

The consumption of bottled water in Italy began in the 1970s. Since then, this usage has grown considerably, also as a result of changes in habits. The environmental impact as a result of the water production chain is very significant; it would be considered, for example, the use of plastic bottles, the consumption of oil in the production of the bottles, the emission of air from the vehicles that transport the bottles, non-recycled plastic packaging, etc. In this study, considering the comparison between two situations, use of bottled water and use of water kiosk (WK), an environmental and economic impactmore » evaluation has been done. The study considered the production of a WK in a town with 9000 inhabitants, which supplies controlled, still and sparkling water, with an organoleptic quality higher than tap water coming from the aqueduct. In particular, taking into consideration the environmental aspects, specific attention was paid both to CO{sub 2} emissions and PET bottle waste reduction. The economic impact evaluation was carried out from the consumer’s point of view. In order to provide a supply service that was economically sustainable, a calculation was done with the aim of determining a specific fee for the supplied water. Moreover, a comparison has been made between quality parameters achieved with the analysis of water from aqueducts with the limits established in the Italian legislation and the parameters of several Italian water brands. The study has the aim at considering the opportunity to follow a different people’s habits, closer to the concept of sustainability, reducing the environmental charge related to the realization, transport and consumption of plastic water bottles without significant reduction of the quality of the service and with convenient and interesting economic implications. In fact the results of the study show that the alternative of WKs is more efficient in economic and environmental terms respect to the use of bottled

Environmental and economic aspects of water kiosks: case study of a medium-sized Italian town.

PubMed

Torretta, Vincenzo

2013-05-01

The consumption of bottled water in Italy began in the 1970s. Since then, this usage has grown considerably, also as a result of changes in habits. The environmental impact as a result of the water production chain is very significant; it would be considered, for example, the use of plastic bottles, the consumption of oil in the production of the bottles, the emission of air from the vehicles that transport the bottles, non-recycled plastic packaging, etc. In this study, considering the comparison between two situations, use of bottled water and use of water kiosk (WK), an environmental and economic impact evaluation has been done. The study considered the production of a WK in a town with 9000 inhabitants, which supplies controlled, still and sparkling water, with an organoleptic quality higher than tap water coming from the aqueduct. In particular, taking into consideration the environmental aspects, specific attention was paid both to CO2 emissions and PET bottle waste reduction. The economic impact evaluation was carried out from the consumer's point of view. In order to provide a supply service that was economically sustainable, a calculation was done with the aim of determining a specific fee for the supplied water. Moreover, a comparison has been made between quality parameters achieved with the analysis of water from aqueducts with the limits established in the Italian legislation and the parameters of several Italian water brands. The study has the aim at considering the opportunity to follow a different people's habits, closer to the concept of sustainability, reducing the environmental charge related to the realization, transport and consumption of plastic water bottles without significant reduction of the quality of the service and with convenient and interesting economic implications. In fact the results of the study show that the alternative of WKs is more efficient in economic and environmental terms respect to the use of bottled water. Copyright �

Colloidal aggregation and structural assembly of aspect ratio variant goethite (α-FeOOH) with nC60 fullerene in environmental media.

PubMed

Ghosh, Saikat; Pradhan, Nihar R; Mashayekhi, Hamid; Zhang, Qiu; Pan, Bo; Xing, Baoshan

2016-12-01

Environmental mobility of C 60 fullerene can be significantly affected in the presence of naturally abundant α-FeOOH. However, α-FeOOH vary significantly in sizes, shapes and associated properties that can greatly influence the fate and transport of C 60 fullerene in environmental media. Therefore, colloidal hetero-association between well crystallized low aspect (L Asp ) α-FeOOH and nC 60 fullerene may differ substantially to weakly crystallized high-aspect (H Asp ) counterpart. In contrast to L Asp α-FeOOH, inherent crystal defects and surface charge generation in H Asp α-FeOOH facilitated strong Coulombic attraction and aggregation with fullerene in acidic pH. However, L Asp α-FeOOH demonstrated subtle entropic depletion mediated interaction with fullerene prevalent in hard rods. Humic acid (HA) encapsulation of H Asp α-FeOOH substantially blocked fullerene attachment. Minute enhancement in colloidal stability was detected for HA-coated H Asp α-FeOOH and fullerene mixture to HA-coated H Asp α-FeOOH alone. To investigate the interfacial assembly of α-FeOOH with fullerene "in situ" differential interference contrast (DIC) microscopic investigations were employed. This study showed significantly different interface behavior of the binary mixtures of fullerene and H Asp α-FeOOH NPs, and L Asp particles. On air-water interface, bare H Asp α-FeOOH displayed liquid crystalline packing. However, addition of fullerene to H Asp α-FeOOH suspension at pH5 produced closed-loop polygonal and circular ring structures. Head-to-tail alignment of magnetic dipoles as well as fullerene hydrophobicity facilitated such assembly formation. "Ex situ" AFM investigation revealed further the presence of magnetically derived ring structure which asserts that the formed "in situ" ensembles were not transient, hence, may abate fullerene transport through environmental interfaces. Barring hydrophobicity assisted attachment of fullerene to L Asp α-FeOOHs, the absence of any close

33 CFR 165.20 - Safety zones.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety zones. 165.20 Section 165... WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Safety Zones § 165.20 Safety zones. A Safety Zone is a water area, shore area, or water and shore area to which, for safety or environmental...

33 CFR 165.20 - Safety zones.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zones. 165.20 Section 165... WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Safety Zones § 165.20 Safety zones. A Safety Zone is a water area, shore area, or water and shore area to which, for safety or environmental...

The health care work environment and adverse health and safety consequences for nurses.

PubMed

Geiger-Brown, Jeanne; Lipscomb, Jane

2010-01-01

Nurses' working conditions are inextricably linked to the quality of care that is provided to patients and patients' safety. These same working conditions are associated with health and safety outcomes for nurses and other health care providers. This chapter describes aspects of the nursing work environment that have been linked to hazards and adverse exposures for nurses, as well as the most common health and safety outcomes of nursing work. We include studies from 2000 to the present by nurse researchers, studies of nurses as subjects, and studies of workers under similar working conditions that could translate to nurses' work environment. We explore a number of work organization factors including shift work and extended work hours, safety climate and culture, teamwork, and communication. We also describe environmental hazards, including chemical hazards (e.g., waste anesthetics, hazardous drugs, cleaning compounds) and airborne and bloodborne pathogen exposure. Nurses' health and safety outcomes include physical (e.g., musculoskeletal disorders, gastrointestinal, slips, trips and falls, physical assault) and psychosocial outcomes (e.g., burnout, work-family conflict). Finally, we present recommendations for future research to further protect nurses and all health care workers from a range of hazardous working conditions.

Health, Safety, and Environment Division annual report 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wade, C.

1992-01-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting the responsibilities involves many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in the HSE Division often stem from these appliedmore » needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The result of these programs is to help develop better practices in occupational health and safety, radiation protection, and environmental sciences.« less

Application study of Bio-FGD based on environmental safety during the coal combustion

NASA Astrophysics Data System (ADS)

Zhang, Pin

2018-05-01

Coal combustion produces a large amount of acidic gas, which is the main cause of acid rain and other natural disasters. Flue Gas Desulfurization (FGD) is a necessary requirement for clean coal combustion. Compared with the traditional chemical desulfurization technology, biological desulfurization has the advantages of low operating cost, without secondary pollution, low carbon emission and the additional economic benefits. The process and structure of BioDeSOx which as one of Bio-FGD technology is introduced. The major factors that influent BioDeSOx Bio- FGD system is the pH, oxidation reduction potential (-300 MV to -400MV), electrical conductivity, the adding amount of nutrient and temperature (30°C-40°C). Taking the Bio- FGD project of Yixing xielian thermal power plant as an example, the BioDeSOx technology was applied in this project. The environmental and economic benefits of the project were greater than the traditional desulfurization technology. With the continuous improvement of environmental safety standards, Bio- FGD technology will have broad application prospects.

Guidance on the prevention and mitigation of environmental, health and safety impacts of electromagnetic fields and radiation for electric transit systems

DOT National Transportation Integrated Search

2008-01-02

The Federal Transit Administration (FTA) Office of Planning and Environment (TPE) tasked the Volpe Center to develop guidance for transit planners, in order to address persisting public health and safety concerns with prolonged EMF environmental expo...

Environmental Performance Report 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

The National Renewable Energy Laboratory's (NREL's) Environmental Performance Report provides a description of the laboratory's environmental management activities for 2015, including information on environmental and sustainability performance, environmental compliance activities and status, and environmental protection programs, highlights, and successes. The purpose of this report is to ensure that U.S. Department of Energy (DOE) and the public receive timely, accurate information about events that have affected or could adversely affect the health, safety, and security of the public or workers; the environment; or the operations of DOE facilities. This report meets the requirements of the Annual Site Environmental Report and ismore » prepared in accordance with the DOE Order 231.1B, Environment, Safety and Health Reporting.« less

Environmental Performance Report 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braus, Genevieve

The National Renewable Energy Laboratory's (NREL's) Environmental Performance Report provides a description of the laboratory's environmental management activities for 2016, including information on environmental and sustainability performance, environmental compliance activities and status, and environmental protection programs, highlights, and successes. The purpose of this report is to ensure that U.S. Department of Energy (DOE) and the public receive timely, accurate information about events that have affected or could adversely affect the health, safety, and security of the public or workers; the environment; or the operations of DOE facilities. This report meets the requirements of the Annual Site Environmental Report and ismore » prepared in accordance with the DOE Order 231.1B, Environment, Safety and Health Reporting.« less

Final environmental impact statement. Waste Isolation Pilot Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-10-01

This volume contains the appendices for the Final Environmental Impact Statement for the Waste Isolation Pilot Plant (WIPP). Alternative geologic environs are considered. Salt, crystalline rock, argillaceous rock, and tuff are discussed. Studies on alternate geologic regions for the siting of WIPP are reviewed. President Carter's message to Congress on the management of radioactive wastes and the findings and recommendations of the interagency review group on nuclear waste management are included. Selection criteria for the WIPP site including geologic, hydrologic, tectonic, physicochemical compatability, and socio-economic factors are presented. A description of the waste types and the waste processing procedures aremore » given. Methods used to calculate radiation doses from radionuclide releases during operation are presented. A complete description of the Los Medanos site, including archaeological and historic aspects is included. Environmental monitoring programs and long-term safety analysis program are described. (DMC)« less

Twenty-Second National Conference on Campus Safety. Safety Monographs for Schools and Colleges. Monograph No. 35.

ERIC Educational Resources Information Center

Green, Jack N., Ed.

The papers include discussions on: (1) training techniques for safety administrators; (2) materials and services from the National Safety Council; (3) fire safety measures; (4) high-rise buildings; (5) the role of the industrial hygienist in environmental health and safety; (6) chemical waste disposal facilities; (7) a chemistry department safety…

Winter Outdoor Trekking: Spiritual Aspects of Environmental Education

ERIC Educational Resources Information Center

Jirásek, Ivo; Veselský, Pavel; Poslt, Jirí

2017-01-01

This text deals with the potential spiritual aspects of being outdoors within the framework of non-formal and informal education. The course being examined was organized by the Vacation School of Lipnice--Outward Bound Czech Republic, and the participants in this course made up the research sample. While the research was not directly focused on…

The Exercise and Environmental Physiology of Extravehicular Activity

NASA Technical Reports Server (NTRS)

Cowell, S. A.; Stocks, J. M.; Evans, D. G.; Simonson, S. R.; Greenleaf, J. E.; Dalton, Bonnie P. (Technical Monitor)

2000-01-01

Over the history of human expansion into space, extravehicular activity (EVA) has become indispensable for both daily living in weightlessness and for further space exploration. The physiological factors involved in the performance of extensive EVA, necessary for construction and maintenance of the International Space Station and during future human interplanetary missions, require further examination. An understanding of the physiological aspects of exercise and thermoregulation in the EVA environment will help to insure the health, safety, and efficiency of working astronauts. To that end, this review will focus on the interaction of the exercise and environmental aspects of EVA, as well as exercise during spaceflight and ground-based simulations such as bed-rest deconditioning. It will examine inflight exercise thermoregulation, and exercise, muscular strength, supine vs. seated exercise, exercise thermoregulation, and exercise in a hypobaric environment. Due to the paucity of data from controlled human research in this area, it is clear that more scientific studies are needed to insure safe and efficient extravehicular activity.

Towards a definition of inorganic nanoparticles from an environmental, health and safety perspective.

PubMed

Auffan, Mélanie; Rose, Jérôme; Bottero, Jean-Yves; Lowry, Gregory V; Jolivet, Jean-Pierre; Wiesner, Mark R

2009-10-01

The regulation of engineered nanoparticles requires a widely agreed definition of such particles. Nanoparticles are routinely defined as particles with sizes between about 1 and 100 nm that show properties that are not found in bulk samples of the same material. Here we argue that evidence for novel size-dependent properties alone, rather than particle size, should be the primary criterion in any definition of nanoparticles when making decisions about their regulation for environmental, health and safety reasons. We review the size-dependent properties of a variety of inorganic nanoparticles and find that particles larger than about 30 nm do not in general show properties that would require regulatory scrutiny beyond that required for their bulk counterparts.

The safety of synthetic zeolites used in detergents.

PubMed

Fruijtier-Pölloth, Claudia

2009-01-01

Synthetic zeolites are replacing phosphates as builders in laundry detergents; workers and consumers may, therefore, increasingly be exposed to these materials and it is important to assess their safety. This article puts mechanistic, toxicological and exposure data into context for a safety assessment. Zeolites are hygroscopic compounds with ion-exchanging properties. They may partially decompose under acidic conditions such as in the stomach releasing sodium ions, silicic acid and aluminum salts. The intact molecule is not bioavailable after oral intake or exposure through the dermal and inhalational routes. Under current conditions of manufacture and use, no systemic toxicity is to be expected from neither the intact molecule nor the degradation products; a significant effect on the bioavailability of other compounds is not likely. Zeolites may cause local irritation. It is, therefore, important to minimise occupational exposure. The co-operation of detergent manufacturers with the manufacturers of washing machines is necessary to find the right balance between environmental aspects such as energy and water savings and the occurrence of detergent residues on textiles due to insufficient rinsing.

Offshore safety case approach and formal safety assessment of ships.

PubMed

Wang, J

2002-01-01

Tragic marine and offshore accidents have caused serious consequences including loss of lives, loss of property, and damage of the environment. A proactive, risk-based "goal setting" regime is introduced to the marine and offshore industries to increase the level of safety. To maximize marine and offshore safety, risks need to be modeled and safety-based decisions need to be made in a logical and confident way. Risk modeling and decision-making tools need to be developed and applied in a practical environment. This paper describes both the offshore safety case approach and formal safety assessment of ships in detail with particular reference to the design aspects. The current practices and the latest development in safety assessment in both the marine and offshore industries are described. The relationship between the offshore safety case approach and formal ship safety assessment is described and discussed. Three examples are used to demonstrate both the offshore safety case approach and formal ship safety assessment. The study of risk criteria in marine and offshore safety assessment is carried out. The recommendations on further work required are given. This paper gives safety engineers in the marine and offshore industries an overview of the offshore safety case approach and formal ship safety assessment. The significance of moving toward a risk-based "goal setting" regime is given.

Environment, Health, and Safety | NREL

Science.gov Websites

property, and the environment. View the Environmental Stewardship, Health, Safety, and Quality Management (OHSAS) 18001 certification demonstrates NREL's commitment to a health and safety management system that into all activities. NREL's staff and management are committed to managing health and safety risk

Railroad safety program, task 2

NASA Technical Reports Server (NTRS)

1983-01-01

Aspects of railroad safety and the preparation of a National Inspection Plan (NIP) for rail safety improvement are examined. Methodology for the allocation of inspection resources, preparation of a NIP instruction manual, and recommendations for future NIP, are described. A statistical analysis of regional rail accidents is presented with causes and suggested preventive measures included.

Key aspects in managing safety when working with multiple contractors: A case study.

PubMed

Drupsteen, Linda; Rasmussen, Hanna B; Ustailieva, Erika; van Kampen, Jakko

2015-01-01

Working with multiple contractors in a shared workplace can introduce and increase safety risks due to complexity. The aim of this study was to explore how safety issues are recognized in a specific case and to identify whether clients and contractors perceive problems similarly. The safety issues are explored through a brief survey and a workshop in the maintenance department of a logistics company. The results indicate that culture and behavior are recognized differently by clients and by contractors. The contractors and client had different perceptions of involvement of contractors by the client. The contractors complained on lack of involvement, which was not fully recognized by the client. The case study used a practical approach to show differences in perception of safety within a project. The study illustrates the need for more applied studies and interventions on contractor safety.

Comprehensive Lifecycle for Assuring System Safety

NASA Technical Reports Server (NTRS)

Knight, John C.; Rowanhill, Jonathan C.

2017-01-01

CLASS is a novel approach to the enhancement of system safety in which the system safety case becomes the focus of safety engineering throughout the system lifecycle. CLASS also expands the role of the safety case across all phases of the system's lifetime, from concept formation to decommissioning. As CLASS has been developed, the concept has been generalized to a more comprehensive notion of assurance becoming the driving goal, where safety is an important special case. This report summarizes major aspects of CLASS and contains a bibliography of papers that provide additional details.

California Guide to Traffic Safety Education.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

The guide proposes an elementary through high school program encompassing many aspects of traffic safety. Chapter 1 presents definitions, instructional goals, behavioral objectives, and K-6 traffic safety concepts coupled with student performance indicators. Various elements of program administration are covered in Chapter 2. Chapter 3 includes…

Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

ERIC Educational Resources Information Center

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

Defining and managing biohazardous waste in U.S. research-oriented universities: a survey of environmental health and safety professionals.

PubMed

Mecklem, Robin Lyn; Neumann, Catherine M

2003-01-01

A survey was conducted of environmental health and safety professionals responsible for biohazardous waste management at 122 institutions. The overall response rate was 82.6 percent (100 out of 122). Results indicate that university policies for biohazardous waste are heavily influenced by state environmental regulations, the Occupational Safety and Health Administration Bloodborne Pathogens Standard, and the biosafety guidelines of the Centers for Disease Control and Prevention and the National Institutes of Health. With respect to definition of waste, 84 percent of the universities treat non-infectious human-cell-culture waste as biohazardous. Sharp items, including hypodermic needles, syringes with needles, and scalpel blades, are commonly treated (by 85 percent of universities) as biohazardous sharps regardless of contamination status. Importantly, while 90 percent of universities use autoclave sterilization for waste treatment, only 52 percent use a biological indicator to validate the process. On-site incineration is currently used by 42 percent of universities. Twenty-two of 42 incinerators are hospital/medical/infectious-waste incinerators, and 10 of these will continue to operate under the U.S. Environmental Protection Agency's revised incinerator regulations. Eighty-seven percent of the respondents indicated that some portion of their university's biohazardous waste is treated and disposed of through a licensed medical waste hauler (MWH). To ensure compliance with institutional policy, most universities segregate and package waste, train waste generators, and conduct inspections.

A soil biotechnology system for wastewater treatment: technical, hygiene, environmental LCA and economic aspects.

PubMed

Kamble, Sheetal Jaisingh; Chakravarthy, Yogita; Singh, Anju; Chubilleau, Caroline; Starkl, Markus; Bawa, Itee

2017-05-01

Soil biotechnology (SBT) is a green engineering approach for wastewater treatment and recycling. Five SBT units located in the Mumbai region were under consideration of which holistic assessment of two SBT plants was carried out considering its technical, environmental and economic aspects and was compared with published research of other three. LCA has been done to evaluate the environmental impacts of construction and operation phase of SBT. Chemical oxygen demand (COD) and biochemical oxygen demand (BOD) removal of more than 90% can be achieved using this technology. Also, the nutrient removal proficiency (nitrate, nitrite, ammoniacal nitrogen, TKN, total nitrogen and phosphates) of this technique is good. On the other hand, SBT has low annual operation and maintenance cost, comparable to land-based systems and lower than conventional or advanced technologies. From the life cycle impact assessment, the main contributors for overall impact from the plant were identified as electricity consumption, discharges of COD, P-PO 4 3- and N-NH 4 + and disposal of sludge. The construction phase was found to have significantly more impact than the operation phase of the plant. This study suggests plant I is not relatively as efficient enough regarding sanitation. SBT provides several benefits over other conventional technologies for wastewater treatment. It is based on a bio-conversion process and is practically maintenance free. It does not produce any odorous bio-sludge and consumes the least energy.

Upholding science in health, safety and environmental risk assessments and regulations.

PubMed

Aschner, Michael; Autrup, Herman N; Berry, Sir Colin L; Boobis, Alan R; Cohen, Samuel M; Creppy, Edmond E; Dekant, Wolfgang; Doull, John; Galli, Corrado L; Goodman, Jay I; Gori, Gio B; Greim, Helmut A; Joudrier, Philippe; Kaminski, Norbert E; Klaassen, Curtis D; Klaunig, James E; Lotti, Marcello; Marquardt, Hans W J; Pelkonen, Olavi; Sipes, I Glenn; Wallace, Kendall B; Yamazaki, Hiroshi

2016-09-14

A public appeal has been advanced by a large group of scientists, concerned that science has been misused in attempting to quantify and regulate unmeasurable hazards and risks. 1 The appeal recalls that science is unable to evaluate hazards that cannot be measured, and that science in such cases should not be invoked to justify risk assessments in health, safety and environmental regulations. The appeal also notes that most national and international statutes delineating the discretion of regulators are ambiguous about what rules of evidence ought to apply. Those statutes should be revised to ensure that the evidence for regulatory action is grounded on the standards of the scientific method, whenever feasible. When independent scientific evidence is not possible, policies and regulations should be informed by publicly debated trade-offs between socially desirable uses and social perceptions of affordable precaution. This article explores the premises, implications and actions supporting the appeal and its objectives. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Occupational health and safety challenges in China--focusing on township-village enterprises.

PubMed

Wang, Xiaorong; Wu, Siying; Song, Qingkun; Tse, Lap-Ah; Yu, Ignatius T S; Wong, Tze-Wai; Griffiths, Sian

2011-01-01

China has experienced dramatic industrialization, urbanization, and economic growth over the last 3 decades. The rapid transformation and dramatic prosperity of industries in rural areas have, in turn, created tremendous challenges for occupational health and safety (OHS). This article was prepared to address occupational health and safety issues in township- and village-owned enterprises (TVEs) from several aspects, including working conditions and workplace hazards, major recognized OHS problems, implications of TVE industries to environmental health, and migrant workers. Among the major recognized OHS problems, pneumoconiosis, chemical poisoning, and workplace accidents, especially in small-scale coal mines, are highlighted. It is suggested that the national polices and regulations that specifically target TVEs are indispensable and a more powerful administrative structure should be established to ensure that the pertinent polices, regulations, and OHS standards can be enforced widely and effectively in practice. Copyright © 2011 Taylor & Francis Group, LLC

Current Sports: Medicine Issues. Annual Safety Education Review--1973.

ERIC Educational Resources Information Center

Craig, Timothy T., Ed.

This document is a collection of papers whose theme is sports safety. Section one, "Government Interest in Sports Safety," includes an article on Washington, D.C.'s focus on sports safety. Section two, "Medical Aspects of Safety in Sports," includes articles regarding the medical basis of restriction from athletics, orthopaedic restrictions, and…

Report of health and environmental effects of increased coal utilization by the Committee on Health and Environmental Effects of Increased Coal Utilization.

PubMed

1980-06-01

The National Energy Plan announced by President Carter on April 29, 1977 proposed a significant increase in the utilization of the vast domestic deposits of coal to replace the dwindling supplies of oil and natural gas, and increasingly expensive oil from foreign sources, to meet national energy needs. At the same time, in recognition of possible adverse health and ecological consequences of increased coal production and use, the President announced that a special committee would be formed to study this aspect of the National Energy Plan. The Committee held a series of public meetings during November and December 1977 to review a number of special papers on particular problems associated with increased coal utilization. These papers, which were prepared by scientists of the US Environmental Protection Agency; the Department of Energy; the HEW National Institute for Occupational Safety and Health, and the National Institute of Environmental Health Sciences; New York University; and Vanderbilt University; provided essential background information for the deliberations of the Committee and were published in EHP Vol. 33, pp. 127-314, 1979. One paper by A. P. Altschuler et al. is published in this volume of EHP. The Committee's basic finding was that it is safe to proceed with plans to increase the utilization of coal if the following environmental and safety policies are adhered to:* Compliance with Federal and State air, water, and solid waste regulations* Universal adoption and successful operation of best available control technology on new facilities* Compliance with reclamation standards* Compliance with mine health and safety standards* Judicious siting of coal-fired facilitiesThe Committee concluded that, even with the best mitigation policies, there will be some adverse health and environmental effects from the dramatic increase in coal use. However, these will not impact all regions and individuals uniformly. The Committee identified six major areas of

Anthropocentric and Ecocentric: An Application of Environmental Philosophy to Outdoor Recreation and Environmental Education

ERIC Educational Resources Information Center

Cocks, Samuel; Simpson, Steven

2015-01-01

Sometimes environmental philosophers write only for other environmental philosophers, and their insights on the nature-human relationship do not reach environmental educators and adventure programmers. This article investigates one aspect of environmental philosophy and the differences between anthropocentric and ecocentric thinking, and applies…

40 CFR 243.201 - Safety.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Safety. 243.201 Section 243.201 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE STORAGE... Procedures § 243.201 Safety. ...

40 CFR 243.201 - Safety.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 243.201 Section 243.201 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE STORAGE... Procedures § 243.201 Safety. ...

Environmental and Water Quality Operational Studies. Environmental Guidelines for Dike Fields.

DTIC Science & Technology

1984-09-01

public release; distribution unlimited. I. DISTRIBUTION STATEMENT (of the abstract entered In Block 20, If different from Report) IS. SUPPLEMENTARY NOTES...necessary and identify by block number) Aquatic biology--Environmental aspects. (LC) Dikes (Engineering)--Design and construction--Environmental...w ad Idenwify by block number) ’The environmental guidelines for dike fields-contained within this report consist of environmental objectives, design

Total safety management: An approach to improving safety culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blush, S.M.

A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobylmore » nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair.« less

Cradle-to-Gate Impact Assessment of a High-Pressure Die-Casting Safety-Relevant Automotive Component

NASA Astrophysics Data System (ADS)

Cecchel, Silvia; Cornacchia, Giovanna; Panvini, Andrea

2016-09-01

The mass of automotive components has a direct influence on several aspects of vehicle performance, including both fuel consumption and tailpipe emissions, but the real environmental benefit has to be evaluated considering the entire life of the products with a proper life cycle assessment. In this context, the present paper analyzes the environmental burden connected to the production of a safety-relevant aluminum high-pressure die-casting component for commercial vehicles (a suspension cross-beam) considering all the phases connected to its manufacture. The focus on aluminum high-pressure die casting reflects the current trend of the industry and its high energy consumption. This work shows a new method that deeply analyzes every single step of the component's production through the implementation of a wide database of primary data collected thanks to collaborations of some automotive supplier companies. This energy analysis shows significant environmental benefits of aluminum recycling.

Aquatic environmental safety assessment and inhibition mechanism of chemicals for targeting Microcystis aeruginosa.

PubMed

Yu, Xiao-Bo; Hao, Kai; Ling, Fei; Wang, Gao-Xue

2014-11-01

Cyanobacteria are a diverse group of Gram-negative bacteria that produce an array of secondary compounds with selective bioactivity against vertebrates, invertebrates, fungi, bacteria and cell lines. Recently the main methods of controlling cyanobacteria are using chemicals, medicinal plants and microorganism but fewer involved the safety research in hydrophytic ecosystems. In search of an environmentally safe compound, 53 chemicals were screened against the developed heavy cyanobacteria bloom Microcystis aeruginosa using coexistence culture system assay. The results of the coexistence assay showed that 9 chemicals inhibited M. aeruginosa effectively at 20 mg L(-1) after 7 days of exposure. Among them dimethomorph, propineb, and paraquat were identified that they are safe for Chlorella vulgaris, Scenedesmus obliquus, Carassius auratus (Goldfish) and Bacillus subtilis within half maximal effective concentration (EC50) values 5.2, 4.2 and 0.06 mg L(-1) after 7 days, respectively. Paraquat as the positive control observed to be more efficient than the other compounds with the inhibitory rate (IR) of 92% at 0.5 mg L(-1). For the potential inhibition mechanism, the chemicals could destroy the cell ultrastructure in different speed. The safety assay proved dimethomorph, propineb and paraquat as harmless formulations or products having potential value in M. aeruginosa controlling, with the advantage of its cell morphology degrading ability.

F14A System Safety Program Plan

DTIC Science & Technology

1981-09-03

by block number) Electromagnetic Pulse (EMP) Safety Plans Test Program EMP Testing F14 Aircraft Plans 20 ABSTRACT (Continue on reverse side if...compromising completion of the required experimental tasks. This document addresses the safety aspect of performing an Electromagnetic Pulse (EMP) test

Environmental Aspects of Domestic Cat Care and Management: Implications for Cat Welfare.

PubMed

Stella, Judith L; Croney, Candace C

2016-01-01

Domestic cats ( Felis silvestris catus ) are the most commonly kept companion animals in the US with large populations of owned (86 million), free-roaming (70 million), research (13,000), and shelter (2-3 million) cats. Vast numbers of cats are maintained in homes and other facilities each year and are reliant on humans for all of their care. Understanding cat behavior and providing the highest quality environments possible, including positive human-cat interactions, based on research could help improve the outcomes of biomedical research, shelter adoptions, and veterinary care, as well as overall cat welfare. Often, however, cats' needs are inadequately met in homes and some aspects may also not be well met in research colonies and shelters, despite the fact that similar problems are likely to be encountered in all of these environments. This paper provides a brief overview of common welfare challenges associated with indoor housing of domestic cats. Essential considerations for cage confinement are reviewed, along with implications of poor cat coping, such as weakening of the human-animal bond and relinquishment to shelters. The important role that environmental management plays in cat behavior and welfare outcomes is explored along with the need for additional research in key areas.

Environmental Aspects of Domestic Cat Care and Management: Implications for Cat Welfare

PubMed Central

Stella, Judith L.

2016-01-01

Domestic cats (Felis silvestris catus) are the most commonly kept companion animals in the US with large populations of owned (86 million), free-roaming (70 million), research (13,000), and shelter (2-3 million) cats. Vast numbers of cats are maintained in homes and other facilities each year and are reliant on humans for all of their care. Understanding cat behavior and providing the highest quality environments possible, including positive human-cat interactions, based on research could help improve the outcomes of biomedical research, shelter adoptions, and veterinary care, as well as overall cat welfare. Often, however, cats' needs are inadequately met in homes and some aspects may also not be well met in research colonies and shelters, despite the fact that similar problems are likely to be encountered in all of these environments. This paper provides a brief overview of common welfare challenges associated with indoor housing of domestic cats. Essential considerations for cage confinement are reviewed, along with implications of poor cat coping, such as weakening of the human-animal bond and relinquishment to shelters. The important role that environmental management plays in cat behavior and welfare outcomes is explored along with the need for additional research in key areas. PMID:27774506

Environmental and policy factors related to physical activity in rural white women.

PubMed

Eyler, Amy A; Vest, Joshua R

2002-01-01

Physical activity is an important aspect of health promotion and disease prevention. However, women often have lower rates of physical activity than men. The purpose of this study was to identify environmental and policy determinants to physical activity among rural white women. Six focus groups were conducted with women aged 20-50 years who were not currently regular exercisers. Women reported that the social environment had a strong impact on physical activity level. Factors of the social environment included guilt, family responsibility, and social support. Environmental and policy barriers such as lack of access to places to exercise and safety concerns were also discussed. Intervention suggestions included family exercise and work-site programs. Information gained from this study can be used to fuel further research and inform future physical activity interventions.

Metrological Support in Technosphere Safety

NASA Astrophysics Data System (ADS)

Akhobadze, G. N.

2017-11-01

The principle of metrological support in technosphere safety is considered. It is based on the practical metrology. The theoretical aspects of accuracy and errors of the measuring instruments intended for diagnostics and control of the technosphere under the influence of factors harmful to human beings are presented. The necessity to choose measuring devices with high metrological characteristics according to the accuracy class and contact of sensitive elements with a medium under control is shown. The types of additional errors in measuring instruments that arise when they are affected by environmental influences are described. A specific example of the analyzers application to control industrial emissions and measure the oil and particulate matter in wastewater is shown; it allows assessing advantages and disadvantages of analyzers. Besides, the recommendations regarding the missing metrological characteristics of the instruments in use are provided. The technosphere continuous monitoring taking into account the metrological principles is expected to efficiently forecast the technosphere development and make appropriate decisions.

Blood transfusion safety: a new philosophy.

PubMed

Franklin, I M

2012-12-01

Blood transfusion safety has had a chequered history, and there are current and future challenges. Internationally, there is no clear consensus for many aspects of the provision of safe blood, although pan-national legislation does provide a baseline framework in the European Union. Costs are rising, and new safety measures can appear expensive, especially when tested against some other medical interventions, such as cancer treatment and vaccination programmes. In this article, it is proposed that a comprehensive approach is taken to the issue of blood transfusion safety that considers all aspects of the process rather than considering only new measures. The need for an agreed level of safety for specified and unknown risks is also suggested. The importance of providing care and support for those inadvertently injured as a result of transfusion problems is also made. Given that the current blood safety decision process often uses a utilitarian principle for decision making--through the calculation of Quality Adjusted Life Years--an alternative philosophy is proposed. A social contract for blood safety, based on the principles of 'justice as fairness' developed by John Rawls, is recommended as a means of providing an agreed level of safety, containing costs and providing support for any adverse outcomes. © 2012 The Author. Transfusion Medicine © 2012 British Blood Transfusion Society.

The Role of Measuring in the Learning of Environmental Occupations and Some Aspects of Environmental Methodology

ERIC Educational Resources Information Center

István, Lüko

2016-01-01

The methodology neglected area of pedagogy, within the environmental specialist teaching methodology cultivating the best part is incomplete. In this article I shall attempt to environmental methodology presented in one part of the University of West Environmental Education workshop, based on the measurement of experiential learning as an…

Public safety training as a force multiplier.

PubMed

Potter, Anthony N; Woodruff, Craig A

2012-01-01

The training of public safety officers to meet the many and varied demands of today's healthcare environment is the second step in developing and maintaining a world class public safety service. Working closely with the corporate training department, and utilizing the latest adult education techniques, the public safety director can ensure that all officers are capable of meeting the challenges threatening the safety and security of his healthcare facilities. This is the second in a series of articles on all aspects of public safety personnel administration.

Aircraft fire safety research

NASA Technical Reports Server (NTRS)

Botteri, Benito P.

1987-01-01

During the past 15 years, very significant progress has been made toward enhancing aircraft fire safety in both normal and hostile (combat) operational environments. Most of the major aspects of the aircraft fire safety problem are touched upon here. The technology of aircraft fire protection, although not directly applicable in all cases to spacecraft fire scenarios, nevertheless does provide a solid foundation to build upon. This is particularly true of the extensive research and testing pertaining to aircraft interior fire safety and to onboard inert gas generation systems, both of which are still active areas of investigation.

Industrial Arts Curriculum Guide for Safety.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

This guide is intended to draw attention to the necessity for safety education in every aspect of industrial arts and to provide resources for upgrading and improving safety instruction in the classroom. It also can be used for inservice training of industrial art teachers and for undergraduate teacher education in Connecticut. Introductory…

Green city Banda Aceh: city planning approach and environmental aspects

NASA Astrophysics Data System (ADS)

Arif, A. A.

2017-02-01

Banda Aceh as the capital of Aceh Province is the region with the tsunami disaster that occurred on December 26, 2004 the most severe of which over 60% of the city area were destroyed mainly coastal region and settlements. One product plan for rehabilitation and reconstruction of Banda Aceh is made of Banda Aceh as Green City. To realize the Green City Banda Aceh, urban development process should be conducted in a planned and integrated way with attention to spatial and environmental aspects to ensure an efficient urban management and to create a healthy, beautiful and comfortable environment. There is a weakness of the process in urban planning and development that occurred at present where cities tend to minimize the development of green open space and land conversion into a commercial district, residential areas, industrial areas, transport networks and infrastructure and facilities for other cities. Another tendency that occurs is urban environment only developed economically but not ecologically, whereas ecological balance is as important as the development of the economic value of urban areas. Such conditions have caused unbalance of urban ecosystems including increased air temperature, air pollution, declining water table, flooding, salt water intrusion and increased content of heavy metals in the soil. From an ecological perspective, unfavorable microclimate, high-temperature increase due to the lack of trees as a sieve / filter against heavy rain, can cause flooding. These conditions result in inconvienient, arid and less beautiful urban areas. The author identifies the elements contained in the Green City Banda Aceh and how the efforts and approaches must be made toward Green City Banda Aceh.

Patient safety climate and worker safety behaviours in acute hospitals in Scotland.

PubMed

Agnew, Cakil; Flin, Rhona; Mearns, Kathryn

2013-06-01

To obtain a measure of hospital safety climate from a sample of National Health Service (NHS) acute hospitals in Scotland and to test whether these scores were associated with worker safety behaviors, and patient and worker injuries. Data were from 1,866 NHS clinical staff in six Scottish acute hospitals. A Scottish Hospital Safety Questionnaire measured hospital safety climate (Hospital Survey on Patient Safety Culture), worker safety behaviors, and worker and patient injuries. The associations between the hospital safety climate scores and the outcome measures (safety behaviors, worker and patient injury rates) were examined. Hospital safety climate scores were significantly correlated with clinical workers' safety behavior and patient and worker injury measures, although the effect sizes were smaller for the latter. Regression analyses revealed that perceptions of staffing levels and managerial commitment were significant predictors for all the safety outcome measures. Both patient-specific and more generic safety climate items were found to have significant impacts on safety outcome measures. This study demonstrated the influences of different aspects of hospital safety climate on both patient and worker safety outcomes. Moreover, it has been shown that in a hospital setting, a safety climate supporting safer patient care would also help to ensure worker safety. The Scottish Hospital Safety Questionnaire has proved to be a usable method of measuring both hospital safety climate as well as patient and worker safety outcomes. Copyright © 2013 National Safety Council and Elsevier Ltd. Published by Elsevier Ltd. All rights reserved.

School bus and children's traffic safety.

PubMed

Pan, Shu-ming; Hargarten, Stephen; Zhu, Shan-kuan

2007-08-01

There is no safer way to transport a child than a school bus. Fatal crashes involving occupants are extremely rare events in the US. In recent years, school bus transportation began to develop in China. We want to bring advanced experience on school bus safety in Western countries such as the US to developing countries. We searched the papers related to school bus safety from Medline, Chinese Scientific Journals Database and the Web of the National Highway Traffic Safety Administration (NHTSA). There were only 9 papers related to school bus safety, which showed that higher levels of safety standards on school buses, school bus-related transportation and environmental laws and injury prevention were the primary reasons for the desired outcome. Few school bus is related to deaths and injuries in the developed countries. The developing countries should make strict environmental laws and standards on school bus safety to prevent children's injury and death.

DESIGNING ENVIRONMENTALLY FRIENDLY CHEMICAL PROCESSES

EPA Science Inventory

The design of a chemical process involves many aspects: from profitability, flexibility and reliability to safety to the environment. While each of these is important, in this work, the focus will be on profitability and the environment. Key to the study of these aspects is the ...

Environmental, health, and safety effects of engineered nanomaterials: challenges and research needs

NASA Astrophysics Data System (ADS)

Fairbrother, Howard

2010-04-01

The number of technologies and consumer products that incorporate engineered nanomaterials (ENMs) has grown rapidly. Indeed, ENMs such as carbon nanotubes and nano-silver, are revolutionizing many commercial technologies and have already been incorporated into more than 800 commercial products, including polymer composites, cell phone batteries, sporting equipment and cosmetics. The global market for ENMs has grown steadily from 7.5 billion in 2003 to 12.7 billion in 2008. Over the next five years, their market value is expected to exceed $27 billion. This surge in demand has been responsible for a corresponding increase in the annual production rates of ENMs. For example, Bayer anticipates that single and multi-walled carbon nanotubes (SWNT and MWNT) production rates will reach 3,000 tons/yr by 2012. Inevitably, some of these synthetic materials will enter the environment either from incidental release during manufacture and transport, or following use and disposal. Consequently, intense scientific research is now being directed towards understanding the environmental, health and safety (EHS) risks posed by ENMs. I will highlight some of the key research challenges and needs in this area, include (i) developing structure-property relationships that will enable physicochemical properties of ENMs to be correlated with environmentally relevant behavior (e.g. colloidal properties, toxicity), (ii) determining the behavior of nanoproducts, and (iii) developing analytical techniques capable of detecting and quantifying the concentration of ENMs in the environment.

Physics of some environmental aspects of energy

NASA Astrophysics Data System (ADS)

Hafemeister, David

1985-11-01

Approximate numerical estimates are carried out on the following environmental effects from energy production and conservation: (1) The greenhouse effect caused by increased CO2 in the atmosphere; (2) Loss of coolant accidents in nuclear reactors; (3) Increased radon concentrations in buildings with very low air infiltration rates; (4) Acid rain from the combustion of fossil fuels; and (5) Explosions of liquified natural gas (LNG).

Environmental Technology (Laboratory Analysis and Environmental Sampling) Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Hinojosa, Oscar V.; Guillen, Alfonso

A project assessed the need and developed a curriculum for environmental technology (laboratory analysis and environmental sampling) in the emerging high technology centered around environmental safety and health in Texas. Initial data were collected through interviews by telephone and in person and through onsite visits. Additional data was…

Mathematical aspects of assessing extreme events for the safety of nuclear plants

NASA Astrophysics Data System (ADS)

Potempski, Slawomir; Borysiewicz, Mieczyslaw

2015-04-01

In the paper the review of mathematical methodologies applied for assessing low frequencies of rare natural events like earthquakes, tsunamis, hurricanes or tornadoes, floods (in particular flash floods and surge storms), lightning, solar flares, etc., will be given in the perspective of the safety assessment of nuclear plants. The statistical methods are usually based on the extreme value theory, which deals with the analysis of extreme deviation from the median (or the mean). In this respect application of various mathematical tools can be useful, like: the extreme value theorem of Fisher-Tippett-Gnedenko leading to possible choices of general extreme value distributions, or the Pickands-Balkema-de Haan theorem for tail fitting, or the methods related to large deviation theory. In the paper the most important stochastic distributions relevant for performing rare events statistical analysis will be presented. This concerns, for example, the analysis of the data with the annual extreme values (maxima - "Annual Maxima Series" or minima), or the peak values, exceeding given thresholds at some periods of interest ("Peak Over Threshold"), or the estimation of the size of exceedance. Despite of the fact that there is a lack of sufficient statistical data directly containing rare events, in some cases it is still possible to extract useful information from existing larger data sets. As an example one can consider some data sets available from the web sites for floods, earthquakes or generally natural hazards. Some aspects of such data sets will be also presented taking into account their usefulness for the practical assessment of risk for nuclear power plants coming from extreme weather conditions.

Safety Psychology Applicating on Coal Mine Safety Management Based on Information System

NASA Astrophysics Data System (ADS)

Hou, Baoyue; Chen, Fei

In recent years, with the increase of intensity of coal mining, a great number of major accidents happen frequently, the reason mostly due to human factors, but human's unsafely behavior are affected by insecurity mental control. In order to reduce accidents, and to improve safety management, with the help of application security psychology, we analyse the cause of insecurity psychological factors from human perception, from personality development, from motivation incentive, from reward and punishment mechanism, and from security aspects of mental training , and put forward countermeasures to promote coal mine safety production,and to provide information for coal mining to improve the level of safety management.

Review article: safety aspects of anesthesia in under-resourced locations.

PubMed

Enright, Angela

2013-02-01

Improving patient safety during anesthesia and surgery is the focus of much effort worldwide. Major advances have occurred since the 1980s, especially in economically advantaged areas. This paper is a review of some of the challenges that face those who work in resource-poor areas of the world. There is a shortage of trained anesthesia providers, both physician and non-physician, and this is particularly acute outside urban areas. Anesthesia is still sometimes delivered by unqualified people, which results in expected high rates of morbidity and mortality. Residency training programs in low-income countries ought to increase their output as anesthesiologists must be available to supervise non-physician providers. All groups require continuing medical education. In addition, increased efforts are needed to recruit trainees into the specialty of anesthesia and to retain them locally. There is a well-recognized shortage of resources for anesthesia. Consequently, concerted efforts are necessary to ensure reliable supplies of drugs, and attention should be paid to the procurement of anesthesia equipment appropriate for the location. Biomedical support must also be developed. Lifebox is a charitable foundation dedicated to supplying pulse oximeters to low- and middle-income countries. Adoption of the World Health Organization's Surgical Safety Checklist could further reduce morbidity and mortality. Much time, effort, planning, and resources are required to ensure that anesthesia in low-income areas can reach internationally accepted standards. Such investment in anesthesia would result in wider access to surgical and obstetrical care, and the quality and safety of that care would be much improved.

ENVIRONMENTAL SYSTEMS MANAGEMENT: TOWARDS A NEW SCIENCE OF SUSTAINABLE ENVIRONMENTAL MANAGEMENT

EPA Science Inventory

Environmental Systems Management (ESM) is the management of environmental problems at the systems level fully accounting for the multi-dimensional nature of the environment. This includes socio-economic dimensions as well as the usual physical and life science aspects of environm...

16 CFR 1021.12 - Environmental assessment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Environmental assessment. 1021.12 Section 1021.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ENVIRONMENTAL REVIEW Contents of Environmental Review Documents § 1021.12 Environmental assessment. (a) An environmental assessment...

Current status of environmental, health, and safety issues of lithium ion electric vehicle batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimmerstedt, L.J.; Ring, S.; Hammel, C.J.

The lithium ion system considered in this report uses lithium intercalation compounds as both positive and negative electrodes and has an organic liquid electrolyte. Oxides of nickel, cobalt, and manganese are used in the positive electrode, and carbon is used in the negative electrode. This report presents health and safety issues, environmental issues, and shipping requirements for lithium ion electric vehicle (EV) batteries. A lithium-based electrochemical system can, in theory, achieve higher energy density than systems using other elements. The lithium ion system is less reactive and more reliable than present lithium metal systems and has possible performance advantages overmore » some lithium solid polymer electrolyte batteries. However, the possibility of electrolyte spills could be a disadvantage of a liquid electrolyte system compared to a solid electrolyte. The lithium ion system is a developing technology, so there is some uncertainty regarding which materials will be used in an EV-sized battery. This report reviews the materials presented in the open literature within the context of health and safety issues, considering intrinsic material hazards, mitigation of material hazards, and safety testing. Some possible lithium ion battery materials are toxic, carcinogenic, or could undergo chemical reactions that produce hazardous heat or gases. Toxic materials include lithium compounds, nickel compounds, arsenic compounds, and dimethoxyethane. Carcinogenic materials include nickel compounds, arsenic compounds, and (possibly) cobalt compounds, copper, and polypropylene. Lithiated negative electrode materials could be reactive. However, because information about the exact compounds that will be used in future batteries is proprietary, ongoing research will determine which specific hazards will apply.« less

40 CFR 240.209 - Safety.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Safety. 240.209 Section 240.209 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.209 Safety. ...

40 CFR 240.209 - Safety.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 240.209 Section 240.209 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.209 Safety. ...

Safety Education--An Essential Element of Technical Training

ERIC Educational Resources Information Center

Glazener, Everett R.; Comstock, Thomas W.

1978-01-01

After tracing the background of the safety movement, provisions of recent safety legislation, and the ecological and environmental impact of industrial processes, the author stresses the need for safety education in technical education programs to prepare future employees for industrial safety requirements. (MF)

A Lithium-Ion Battery with Enhanced Safety Prepared using an Environmentally Friendly Process.

PubMed

Mueller, Franziska; Loeffler, Nicholas; Kim, Guk-Tae; Diemant, Thomas; Behm, R Jürgen; Passerini, Stefano

2016-06-08

A new lithium-ion battery chemistry is presented based on a conversion-alloying anode material, a carbon-coated Fe-doped ZnO (TMO-C), and a LiNi1/3 Mn1/3 Co1/3 O2 (NMC) cathode. Both electrodes were fabricated using an environmentally friendly cellulose-based binding agent. The performance of the new lithium-ion battery was evaluated with a conventional, carbonate-based electrolyte (ethylene carbonate:diethyl carbonate-1 m lithium hexafluorophosphate, EC:DEC 1 m LiPF6 ) and an ionic liquid (IL)-based electrolyte (N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide-0.2 m lithium bis(trifluoromethanesulfonyl)imide, Pyr14 TFSI 0.2 m LiTFSI), respectively. Galvanostatic charge/discharge tests revealed a reduced rate capability of the TMO-C/Pyr14 TFSI 0.2 m LiTFSI/NMC full-cell compared to the organic electrolyte, but the coulombic efficiency was significantly enhanced. Moreover, the IL-based electrolyte substantially improves the safety of the system due to a higher thermal stability of the formed anodic solid electrolyte interphase and the IL electrolyte itself. While the carbonate-based electrolyte shows sudden degradation reactions, the IL exhibits a slowly increasing heat flow, which does not constitute a serious safety risk. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A system safety model for developmental aircraft programs

NASA Technical Reports Server (NTRS)

Amberboy, E. J.; Stokeld, R. L.

1982-01-01

Basic tenets of safety as applied to developmental aircraft programs are presented. The integration of safety into the project management aspects of planning, organizing, directing and controlling is illustrated by examples. The basis for project management use of safety and the relationship of these management functions to 'real-world' situations is presented. The rationale which led to the safety-related project decision and the lessons learned as they may apply to future projects are presented.

Managing risk in healthcare: understanding your safety culture using the Manchester Patient Safety Framework (MaPSaF).

PubMed

Parker, Dianne

2009-03-01

To provide sufficient information about the Manchester Patient Safety Framework (MaPSaF) to allow healthcare professionals to assess its potential usefulness. The assessment of safety culture is an important aspect of risk management, and one in which there is increasing interest among healthcare organizations. Manchester Patient Safety Framework offers a theory-based framework for assessing safety culture, designed specifically for use in the NHS. The framework covers multiple dimensions of safety culture, and five levels of safety culture development. This allows the generation of a profile of an organization's safety culture in terms of areas of relative strength and challenge, which can be used to identify focus issues for change and improvement. Manchester Patient Safety Framework provides a useful method for engaging healthcare professionals in assessing and improving the safety culture in their organization, as part of a programme of risk management.

Report on health and environmental effects of increased coal utilization*

PubMed Central

1980-01-01

The National Energy Plan announced by President Carter on April 29, 1977 proposed a significant increase in the utilization of the vast domestic deposits of coal to replace the dwindling supplies of oil and natural gas, and increasingly expensive oil from foreign sources, to meet national energy needs. At the same time, in recognition of possible adverse health and ecological consequences of increased coal production and use, the President announced that a special committee would be formed to study this aspect of the National Energy Plan. The Committee held a series of public meetings during November and December 1977 to review a number of special papers on particular problems associated with increased coal utilization. These papers, which were prepared by scientists of the US Environmental Protection Agency; the Department of Energy; the HEW National Institute for Occupational Safety and Health, and the National Institute of Environmental Health Sciences; New York University; and Vanderbilt University; provided essential background information for the deliberations of the Committee and were published in EHP Vol. 33, pp. 127–314, 1979. One paper by A. P. Altschuler et al. is published in this volume of EHP. The Committee's basic finding was that it is safe to proceed with plans to increase the utilization of coal if the following environmental and safety policies are adhered to: • Compliance with Federal and State air, water, and solid waste regulations • Universal adoption and successful operation of best available control technology on new facilities • Compliance with reclamation standards • Compliance with mine health and safety standards • Judicious siting of coal-fired facilities The Committee concluded that, even with the best mitigation policies, there will be some adverse health and environmental effects from the dramatic increase in coal use. However, these will not impact all regions and individuals uniformly. The Committee identified six

Review of the FY15 Defense Environmental International Cooperation (DEIC) Program

DTIC Science & Technology

2016-03-01

Secretary of Defense for Energy, Installations and Environmental, Environmental Safety and Occupational Health [OASD (EI&E/ESOH)]. The views, opinions...DEIC Program The DEIC program, which resides within the Environment, Safety , and Occupational Health (ESOH) office of the Deputy Under Secretary of...resiliency, maritime safety and security, and environmental protection in general. 7 While this

Environmental benefits and concerns on safety: communicating latest results on nanotechnology safety research-the project DaNa2.0.

PubMed

Kühnel, D; Marquardt, C; Nau, K; Krug, H F; Paul, F; Steinbach, C

2017-04-01

The use of nanotechnology and advanced materials promises to revolutionise many areas of technology and improve our daily life. In that respect, many positive effects on the environment are expected, either directly, by developing new technologies for remediation, filtering techniques or energy generation, or indirectly, by e.g. saving resources due to lower consumption of raw materials, or lower energy and fuel consumption due to reduced weight of vehicles. However, such beneficial effects of new technologies are often confronted by concerns regarding the safety of novel substances or materials. During the past 10 years, great effort has been put into research on potential hazards of nanomaterials towards environmental organisms. As the methodology for reliable assessment of nanomaterials was immature, many studies reporting contradictory results have been published, hindering both risk assessment for nanomaterials, as well as the knowledge communication to all involved stakeholders. Thus, DaNa 2.0 serves as a platform to implement trusted knowledge on nanomaterials for an objective discussion.

Six Tips for College Health and Safety

MedlinePlus

... Emergency Preparedness & Response Environmental Health Healthy Living Injury, Violence & Safety Life Stages & Populations Travelers’ Health Workplace Safety & Health Features Media Sign up for Features Get Email Updates To ...

A comparative study on the Environmental Impact Assessment of industrial projects in Malaysia

NASA Astrophysics Data System (ADS)

Marmaya, E. A.; Mahbub, R.

2018-02-01

In the past decade, mankind has been manipulating the natural environment to better suit its needs for providing buildings and infrastructure for residential, commercial, business and industrial purposes. The rapid industrialization that has taken place has generated several issues regarding the environment. Therefore, managing environmental risks in construction projects has been recognized as an important process to achieve the project objectives in terms of time, cost, quality, safety and environmental sustainability. The aim of this research is to assess the environmental impact of industrial projects to the surrounding areas. The impact to the environment can be categorized into several aspects such as ecosystem impact, natural resources impact and public impact. This research employs the quantitative approach, that is, a questionnaire survey targeted at the occupants living in the surrounding areas of the case study location, namely the industrial sites in Sabah Ammonia Urea (SAMUR), Sipitang, Sabah and Lynas Advanced Materials Plant (LAMP), Gebeng Pahang. The findings of the research show that the two projects are perceived to have negative environmental impact especially for land pollution and green-house gas emissions.

Health and safety impacts of nuclear, geothermal, and fossil-fuel electric generation in California. Volume 9. Methodologies for review of the health and safety aspects of proposed nuclear, geothermal, and fossil-fuel sites and facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nero, A.V.; Quinby-Hunt, M.S.

1977-01-01

This report sets forth methodologies for review of the health and safety aspects of proposed nuclear, geothermal, and fossil-fuel sites and facilities for electric power generation. The review is divided into a Notice of Intention process and an Application for Certification process, in accordance with the structure to be used by the California Energy Resources Conservation and Development Commission, the first emphasizing site-specific considerations, the second examining the detailed facility design as well. The Notice of Intention review is divided into three possible stages: an examination of emissions and site characteristics, a basic impact analysis, and an assessment of publicmore » impacts. The Application for Certification review is divided into five possible stages: a review of the Notice of Intention treatment, review of the emission control equipment, review of the safety design, review of the general facility design, and an overall assessment of site and facility acceptability.« less

Systems engineering aspects of a preliminary conceptual design of the space station environmental control and life support system

NASA Technical Reports Server (NTRS)

Lin, C. H.; Meyer, M. S.

1983-01-01

The systems engineering aspects of developing a conceptual design of the Space Station Environmental Control and Life Support System (ECLSS) are discussed. Topics covered include defining system requirements and groundrules for approach, formulating possible cycle closure options, and establishing a system-level mass balance on the essential materials processed in oxygen and water cycles. Consideration is also given to the performance of a system trade-off study to determine the best degree of cycle closure for the ECLSS, and the construction of a conceptual design of the ECLSS with subsystem performance specifications and candidate concepts. For the optimum balance between development costs, technological risks, and resupply penalties, a partially closed cycle ECLSS option is suggested.

Environmental Assessment for Perimeter Security Lighting at Fort MacArthur, California

DTIC Science & Technology

2007-07-01

transportation, visual resources, cultural resources, socioeconomics, environmental justice, hazardous materials and waste and safety . The environmental...Materials and Wastes 53 3.13 Safety 56 4.0 Environmental Consequences 57 4.1 Air Quality 57 4.2 Noise 58 4.3 Land Use 60 4.4 Geological Resources 61...Socioeconomics 70 4.11 Environmental Justice and Protection of Children 71 4.12 Hazardous Materials and Wastes 73 4.13 Safety 74 5.0 Cumulative

Environmental Assessment/Baseline Survey to Establish New Drop Zone (DZ) in Cadiz, Ohio

DTIC Science & Technology

2009-03-01

Force, along with other available information, to: • Develop sufficient information to assess the health and safety risks on the property surveyed and...Environmental Health Risks and Safety Risks . This EO directs federal agencies to identify and assess environmental health and safety risks that may...or prediction or forecast of, any environmental risk for any property. Only a Phase I Environmental Site Assessment performed by an environmental

[Infection control and safety culture in German hospitals].

PubMed

Hansen, Sonja; Schwab, Frank; Gropmann, Alexander; Behnke, Michael; Gastmeier, Petra

2016-07-01

Healthcare-associated infections (HAI) are the most frequent adverse events in the healthcare setting and their prevention is an important contribution to patient safety in hospitals. To analyse to what extent safety cultural aspects with relevance to infection control are implemented in German hospitals. Safety cultural aspects of infection control were surveyed with an online questionnaire; data were analysed descriptively. Data from 543 hospitals with a median of [IQR] 275 [157; 453] beds were analysed. Almost all hospitals (96.6 %) had internal guidelines for infection control (IC) in place; 82 % defined IC objectives, most often regarding hand hygiene (HH) (93 %) and multidrug resistant organisms (72 %) and less frequently for antibiotic stewardship (48 %) or prevention of specific HAI. In 94 % of hospitals, a reporting system for adverse events was in place, which was also used to report low compliance with HH, outbreaks and Clostridium difficile-associated infections. Members of the IC team were most often seen to hold daily responsibility for IC in the hospital, but rarely other hospital staff (94 versus 19 %). Safety cultural aspects are not fully implemented in German hospitals. IC should be more strongly implemented in healthcare workers' daily routine and more visibly supported by hospital management.

Vaccine safety evaluation: Practical aspects in assessing benefits and risks.

PubMed

Di Pasquale, Alberta; Bonanni, Paolo; Garçon, Nathalie; Stanberry, Lawrence R; El-Hodhod, Mostafa; Tavares Da Silva, Fernanda

2016-12-20

Vaccines are different from most medicines in that they are administered to large and mostly healthy populations including infants and children, so there is a low tolerance for potential risks or side-effects. In addition, the long-term benefits of immunisation in reducing or eliminating infectious diseases may induce complacency due to the absence of cases. However, as demonstrated in recent measles outbreaks in Europe and United States, reappearance of the disease occurs as soon as vaccine coverage falls. Unfounded vaccine scares such as those associating the combined measles-mumps-rubella vaccine with autism, and whole-cell pertussis vaccines with encephalopathy, can also have massive impacts, resulting in reduced vaccine uptake and disease resurgence. The safety assessment of vaccines is exhaustive and continuous; beginning with non-clinical evaluation of their individual components in terms of purity, stability and sterility, continuing throughout the clinical development phase and entire duration of use of the vaccine; including post-approval. The breadth and depth of safety assessments conducted at multiple levels by a range of independent organizations increases confidence in the rigour with which any potential risks or side-effects are investigated and managed. Industry, regulatory agencies, academia, the medical community and the general public all play a role in monitoring vaccine safety. Within these stakeholder groups, the healthcare professional and vaccine provider have key roles in the prevention, identification, investigation and management of adverse events following immunisation (AEFI). Guidelines and algorithms aid in determining whether AEFI may have been caused by the vaccine, or whether it is coincidental to it. Healthcare providers are encouraged to rigorously investigate AEFIs and to report them via local reporting processes. The ultimate objective for all parties is to ensure vaccines have a favourable benefit-risk profile. Copyright �

Environmental Education Center.

ERIC Educational Resources Information Center

Holmes (Warren) Co. and Black (Kenneth) Associate, Architects, Lansing, MI.

Public awareness and concern for our natural environment have rapidly increased. With new demands for knowledge and action concerning all aspects of environmental quality, schools have begun to incorporate into their curriculums new programs emphasizing environmental awareness and appreciation at all age levels. To bring students into further…

Environmental aspects in plant protection practices of non-agricultural pesticide users: case study of communes and the ministry of public works and transport (MET) of the Walloon Region (Belgium).

PubMed

Godeaux, D; Schiffers, B; Culot, M

2008-01-01

In order to gain a better understanding of non-agricultural pesticide use and to prepare the legislative and technical dossiers required under the Water Framework Directive, between October 2006 and March 2007, two surveys were conducted of 97 Walloon communes and 65 districts of the Walloon Ministry of Public Works and Transport (MET) (General Directorates for Motorways and Roads and for Waterway Infrastructure). The questionnaire (26 questions on six topics) was sent by e-mail or fax, with a response rate of 60 out of 97 communes and 33 out of 65 districts. This article describes the environmental aspects of the surveys (health-related aspects are the subject of separate article). The surveys have brought to light a number of good practices (including zero pesticides) and a growing awareness of environmental issues among non-agricultural users. However, bad habits, legislation infringements and a failure to follow good plant protection practice are still a problem and pose major environmental risks (in the form of water pollution from pesticides). Information, awareness-raising and training therefore remain a priority for non-agricultural users.

21 CFR 25.16 - Public health and safety emergencies.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Public health and safety emergencies. 25.16... ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration § 25.16 Public health... importance to the public health or safety, may make full adherence to the procedural provisions of NEPA and...

21 CFR 25.16 - Public health and safety emergencies.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Public health and safety emergencies. 25.16... ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration § 25.16 Public health... importance to the public health or safety, may make full adherence to the procedural provisions of NEPA and...

21 CFR 25.16 - Public health and safety emergencies.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Public health and safety emergencies. 25.16... ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration § 25.16 Public health... importance to the public health or safety, may make full adherence to the procedural provisions of NEPA and...

21 CFR 25.16 - Public health and safety emergencies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Public health and safety emergencies. 25.16... ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration § 25.16 Public health... importance to the public health or safety, may make full adherence to the procedural provisions of NEPA and...

Environmental Aspects of Two Volatile Organic Compound Groundwater Treatment Designs at the Rocky Flats Site - 13135

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalski, Casey C.; DiSalvo, Rick; Boylan, John

2013-07-01

DOE's Rocky Flats Site in Colorado is a former nuclear weapons production facility that began operations in the early 1950's. Because of releases of hazardous substances to the environment, the federally owned property and adjacent offsite areas were placed on the CERCLA National Priorities List in 1989. The final remedy was selected in 2006. Engineered components of the remedy include four groundwater treatment systems that were installed before closure as CERCLA-accelerated actions. Two of the systems, the Mound Site Plume Treatment System and the East Trenches Plume Treatment System, remove low levels of volatile organic compounds using zero-valent iron media,more » thereby reducing the loading of volatile organic compounds in surface water resulting from the groundwater pathway. However, the zero-valent iron treatment does not reliably reduce all volatile organic compounds to consistently meet water quality goals. While adding additional zero-valent iron media capacity could improve volatile organic compound removal capability, installation of a solar powered air-stripper has proven an effective treatment optimization in further reducing volatile organic compound concentrations. A comparison of the air stripper to the alternative of adding additional zero-valent iron capacity to improve Mound Site Plume Treatment System and East Trenches Plume Treatment System treatment based on several key sustainable remediation aspects indicates the air stripper is also more 'environmentally friendly'. These key aspects include air pollutant emissions, water quality, waste management, transportation, and costs. (authors)« less

Principles of Safety Pharmacology

PubMed Central

Pugsley, M K; Authier, S; Curtis, M J

2008-01-01

Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.). PMID:18604233

Perceived Neighborhood Safety and Adolescent School Functioning

ERIC Educational Resources Information Center

Martin-Storey, Alexa; Crosnoe, Robert

2014-01-01

This study examined the association between adolescents' perceptions of their neighborhoods' safety and multiple elements of their functioning in school with data on 15 year olds from the NICHD Study of Early Child Care and Youth Development (n = 924). In general, perceived neighborhood safety was more strongly associated with aspects of schooling…

Studies of vehicle lane-changing dynamics and its effect on traffic efficiency, safety and environmental impact

NASA Astrophysics Data System (ADS)

Li, Xiang; Sun, Jian-Qiao

2017-02-01

Drivers often change lanes on the road to maintain desired speed and to avoid slow vehicles, pedestrians, obstacles and lane closure. Understanding the effect of lane-changing on the traffic is an important topic in designing optimal traffic control systems. This paper presents a comprehensive study of this topic. We review the theory of microscopic dynamic car-following models and the lane-changing models, propose additional lane-changing rules to deal with moving bottleneck and lane reduction, and investigate the effects of lane-changing on the traffic efficiency, traffic safety and fuel consumption as a function of different variables including the distance of the emergency sign ahead of the lane closure, speed limit, traffic density, etc. Extensive simulations of the traffic system have been carried out in different scenarios. A number of important findings of the effect of various factors on the traffic are reported. These findings provide guidance on the traffic management and are important to the designers and engineers of modern highway or inner city roads to achieve high traffic efficiency and safety with minimum environmental impact.

Safety aspects of whole-body cryochamber and cryosauna operation

NASA Astrophysics Data System (ADS)

Agnieszka, Piotrowska

2017-12-01

Interest in low temperature treatment is constantly increasing. Whole-body cryotherapy (WBC) devices are becoming available not only in medical centers but also in local gyms and spa centers. A new group of users are professional sport clubs where 3-minutes session of whole-body cryotherapy is post-training procedure to improve and speed up the recovery process. There are four different types of WBC devices available on the market and offered to commercial (non-medical) users. The American and European market is dominated by two of them: classic cryochambers and cryosaunas. Both constructions are supplied with liquid nitrogen. Low temperature inside classic cryochamber is produced by evaporating of liquid nitrogen in two or more heat exchangers. There is never a direct contact between user and cryogenic medium in any of system operation mode (closed supply system). Cryosauna is cooled down by filling with cold vapor of liquid nitrogen. Supply system is considered open because it allows for direct contact between user and cryogenic medium. Open supply system of cryosauna is primary and most questionable issue of its operational safety, particularly after tragic accident in October 2015. This paper presents the comparative analysis of classic cryochamber and cryosauna from safety point of view. Both devices have been analyzes and tested on existing systems in operation. Paper gives detailed analysis of constructions, supply systems and working parameters. Special attention has been focused to problem of oxygen deficiency hazard. Different failure or accident scenarios have been analyzed and discussed.

Clinical safety and professional liability claims in Ophthalmology.

PubMed

Dolz-Güerri, F; Gómez-Durán, E L; Martínez-Palmer, A; Castilla Céspedes, M; Arimany-Manso, J

2017-11-01

Patient safety is an international public health priority. Ophthalmology scientific societies and organisations have intensified their efforts in this field. As a tool to learn from errors, these efforts have been linked to the management of medical professional liability insurance through the analysis of claims. A review is performed on the improvements in patient safety, as well as professional liability issues in Ophthalmology. There is a high frequency of claims and risk of economic reparation of damage in the event of a claim in Ophthalmology. Special complaints, such as wrong surgery or lack of information, have a high risk of financial compensation and need strong efforts to prevent these potentially avoidable events. Studies focused on pathologies or specific procedures provide information of special interest to sub-specialists. The specialist in Ophthalmology, like any other doctor, is subject to the current legal provisions and appropriate mandatory training in the medical-legal aspects of health care is essential. Professionals must be aware of the fundamental aspects of medical professional liability, as well as specific aspects, such as defensive medicine and clinical safety. The understanding of these medical-legal aspects in the routine clinical practice can help to pave the way towards a satisfactory and safe professional career, and help in increasing patient safety. The aim of this review is to contribute to this training, for the benefit of professionals and patients. Copyright © 2017 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

Commercial vehicle (CV) retrofit safety device (RSD) kits project.

DOT National Transportation Integrated Search

2014-07-01

Retrofit Safety Device (RSD) kits were developed and deployed on commercial vehicles as part of the U.S. DOT Connected Vehicle Safety Pilot to gain insight into the unique aspects of deploying connected vehicle technology in a commercial vehicle envi...

Environmental risk management and preparations for the first deep water well in Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berger, F.

Statoil is among the leaders in protecting health, environment and safety in all aspects of the business. The evaluations of business opportunities and development of blocks opened by authorities for petroleum exploration, are assessed in accordance with the goals for environmental protection. Progressive improvement of environmental performance is secured through proper environmental risk management. In 1995, Statoil, the technical operator on Block 210 off the Nigerian coast, was the first company to drill in deep waters in this area. An exploration well was drilled in a water depth of about 320 meters. The drilling preparations included environmental assessment, drillers Hazop,more » oil spill drift calculations, oil spill response plans and environmental risk analysis. In the environmental preparations for the well, Statoil adhered to local and national government legislation, as well as to international guidelines and company standards. Special attention was paid to the environmental sensitivity of potentially affected areas. Statoil co-operated with experienced local companies, with the authorities and other international and national oil companies. This being the first deep water well offshore Nigeria, it was a challenge to co-operate with other operators in the area. The preparations that were carried out, will set the standard for future environmental work in the area. Co-operation difficulties in the beginning were turned positively into a attitude to the environmental challenge.« less

Teaching Chemistry Lab Safety through Comics

NASA Astrophysics Data System (ADS)

di Raddo, Pasquale

2006-04-01

As a means for raising students' interest in aspects pertaining to chemistry lab safety, this article presents a novel approach to teaching this important subject. Comic book lab scenes that involve fictional characters familiar to many students are presented and discussed as to the safety concerns represented in those images. These are discussed in a safety prelab session. For the sake of comparison, students are then shown images taken from current chemistry journals of safety-conscious contemporary chemists at work in their labs. Finally the need to adhere to copyright regulations for the use of the images is discussed so as to increase students' awareness of academic honesty and copyright issues.

Columbus safety and reliability

NASA Astrophysics Data System (ADS)

Longhurst, F.; Wessels, H.

1988-10-01

Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

Art Safety.

ERIC Educational Resources Information Center

BCATA Journal for Art Teachers, 1991

1991-01-01

Advocating that Canadian art programs should use and model environmentally safe practices, the articles in this journal focus on issues of safe practices in art education. Articles are: (1) "What is WHMIS?"; (2) "Safety Precautions for Specific Art Processes"; (3) "Toxic Substances"; (4) "Using Clay, Glazes, and…

Safe Leadership in OE; Part 1: Aspects of Safety.

ERIC Educational Resources Information Center

Peart, J. Richard

1991-01-01

Analyzes present trends in accidents occurring among groups engaged in outdoor or environmental education in England and Wales. Assesses the causes of the accidents and the qualifications of the group leaders. Provides statistics and examples of several incidents. Emphasizes the need for expert leadership to avoid hazards. Contains several tables…

Training and action for patient safety: embedding interprofessional education for patient safety within an improvement methodology.

PubMed

Slater, Beverley L; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based training program that embeds patient safety within quality improvement methods. Kirkpatrick's "levels of evaluation" model was adopted to evaluate the program in health organizations across one city in the north of England. Questionnaires were used to assess reaction of participants to the program (Level 1). Improvements in patient safety knowledge and patient safety culture (Level 2) were assessed using a 12-item multiple-choice questionnaire and a culture questionnaire. Interviews and project-specific quantitative measurements were used to assess changes in professional practice and patient outcomes (Levels 3 and 4). All aspects of the program were positively received by participants. Few participants completed the MCQ at both time points, but those who did showed improvement in knowledge. There were some small but significant improvements in patient safety culture. Interviews revealed a number of additional benefits beyond the specific problems addressed. Most importantly, 8 of the 11 teams showed improvements in patient safety practices and/or outcomes. This program is an example of interprofessional education in practice and demonstrates that team-based learning using quality improvement methods is feasible and can be effective in improving patient safety, but requires time and space for participants. Alignment with continuing education arrangements could support mainstream adoption of this approach within organizations. Copyright © 2012 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical Education.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1993-01-01

The Aerospace Safety Advisory Panel (ASAP) provided oversight on the safety aspects of many NASA programs. In addition, ASAP undertook three special studies. At the request of the Administrator, the panel assessed the requirements for an assured crew return vehicle (ACRV) for the space station and reviewed the organization of the safety and mission quality function within NASA. At the behest of Congress, the panel formed an independent, ad hoc working group to examine the safety and reliability of the space shuttle main engine. Section 2 presents findings and recommendations. Section 3 consists of information in support of these findings and recommendations. Appendices A, B, C, and D, respectively, cover the panel membership, the NASA response to the findings and recommendations in the March 1992 report, a chronology of the panel's activities during the reporting period, and the entire ACRV study report.

The safety improvement of Romanian radioactive waste facilities as an example for human and environmental protection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barariu, Gheorghe

2013-07-01

According to IAEA classification, Romania with two nuclear research centres, with 2 Nuclear Power Units in operation at Cernavoda Town and with 2 new Units envisaged to be in operation soon, can be considered as a country with an average nuclear activity. In Romania there was an extensive interest in management of radioactive wastes generated by the use of nuclear technology in industry and research. Using the most advanced technologies in the mentioned time periods, Romania successfully accomplished to solve all management issues related to radioactive wastes being addressed all safety concerns. Every step of nuclear activity development was accompaniedmore » by the suitable waste management facilities. So that, in order to improve the existing treatment and disposal capacities for institutional waste, the existing Radioactive Waste Treatment Facility (STDR) and the National Repository Radioactive Wastes (DNDR) at Baita, Bihor, will be improved to actual requirements on the occasion of VVR-S Research Reactor decommissioning. This activity is in development into the frame of a National funded project related to disposal galleries filling improvement and repository closure for DNDR Baita, Bihor. All improvements will be approved by Environmental Protection Authority and Regulatory Body, being a guaranty of human and environmental protection. Also, in accordance with national specific and international policies and taking into account decommissioning activities related to the present operating NPPs, all necessary measures were considered in order to avoid unnecessary generation of radioactive wastes, to minimize, as much as possible, waste production and accumulation and the necessity to develop optimum solutions for a new repository with the assurance of improved nuclear safety. (authors)« less

Sustainable development and next generation's health: a long-term perspective about the consequences of today's activities for food safety.

PubMed

Frazzoli, Chiara; Petrini, Carlo; Mantovani, Alberto

2009-01-01

Development is defined sustainable when it meets the needs of the present without compromising the ability of future generations to meet their own needs. Pivoting on social, environmental and economic aspects of food chain sustainability, this paper presents the concept of sustainable food safety based on the prevention of risks and burden of poor health for generations to come. Under this respect, the assessment of long-term, transgenerational risks is still hampered by serious scientific uncertainties. Critical issues to the development of a sustainable food safety framework may include: endocrine disrupters as emerging contaminants that specifically target developing organisms; toxicological risks assessment in Countries at the turning point of development; translating knowledge into toxicity indexes to support risk management approaches, such as hazard analysis and critical control points (HACCP); the interplay between chemical hazards and social determinants. Efforts towards the comprehensive knowledge and management of key factors of sustainable food safety appear critical to the effectiveness of the overall sustainability policies.

23 CFR 771.119 - Environmental assessments.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Environmental assessments. 771.119 Section 771.119... ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.119 Environmental assessments. (a) An EA shall be prepared by... aspects of the proposed action have potential for social, economic, or environmental impact; identify...

23 CFR 771.119 - Environmental assessments.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Environmental assessments. 771.119 Section 771.119... ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.119 Environmental assessments. (a) An EA shall be prepared by... aspects of the proposed action have potential for social, economic, or environmental impact; identify...

Energy, environmental and operation aspects of a SRF-fired fluidized bed waste-to-energy plant.

PubMed

De Gisi, Sabino; Chiarelli, Agnese; Tagliente, Luca; Notarnicola, Michele

2018-03-01

-scale data highlighted how the lower the rate of fluff in the mixture was, the greater the number of plant shutdown due to sand bed de-fluidization was. Finally, the aspects in terms of the energy, environmental protection and raw material consumption have been discussed with reference to similar WtE plants such as Robbins (Chicago, USA), Lidköping (Sweden), Toshima (Tokyo, Japan), Madrid (Spain), Dundee (Scotland, UK) and Valene (Mantes la Jolie, France). Copyright © 2017 Elsevier Ltd. All rights reserved.

Processes of technology assessment: The National Transportation Safety Board

NASA Technical Reports Server (NTRS)

Weiss, E.

1972-01-01

The functions and operations of the Safety Board as related to technology assessment are described, and a brief history of the Safety Board is given. Recommendations made for safety in all areas of transportation and the actions taken are listed. Although accident investigation is an important aspect of NTSB's activity, it is felt that the greatest contribution is in pressing for development of better accident prevention programs. Efforts of the Safety Board in changing transportation technology to improve safety and prevent accidents are illustrated.

Analysis of radiation environmental safety for China's Spallation Neutron Source (CSNS)

NASA Astrophysics Data System (ADS)

Wang, Qing-Bin; Wu, Qing-Biao; Ma, Zhong-Jian; Zhang, Qing-Jiang; Li, Nan; Wu, Jing-Min; Liu, Jian; Zhang, Gang

2010-07-01

The China Spallation Neutron Source (CSNS) is going to be located in Dalang Town, Dongguan City in the Guangdong Province. In this paper we report the results of the parameters related with environment safety based on experiential calculations and Monte Carlo simulations. The main project of the accelerator is an under ground construction. On top there is a 0.5 m concrete and 5.0 m soil covering for shielding, which can reduce the dose out of the tunnel's top down to 0.2 μSv/h. For the residents on the boundary of the CSNS, the dose produced by skyshine, which is caused by the penetrated radiation leaking from the top of the accelerator, is no more than 0.68 μSv/a. When CSNS is operating normally, the maximal annual effective dose due to the emission of gas from the tunnel is 2.40×10-3 mSv/a to the public adult, and 2.29×10-3 mSv/a to a child, both values are two orders of magnitude less than the limiting value for control and management. CSNS may give rise to an activation of the soil and groundwater in the nearest tunnels, where the main productions are 3H, 7Be, 22Na, 54Mn, etc. But the specific activity is less than the exempt specific activity in the national standard GB13376-92. So it is safe to say that the environmental impact caused by the activation of soil and groundwater is insignificant. To sum up, for CSNS, as a powerful neutron source device, driven by a high-energy high-current proton accelerator, a lot of potential factors affecting the environment exist. However, as long as effective shieldings for protection are adopted and strict rules are drafted, the environmental impact can be kept under control within the limits of the national standard.

Patient safety priorities in mental healthcare in Switzerland: a modified Delphi study

PubMed Central

Mascherek, Anna C

2016-01-01

Objective Identifying patient safety priorities in mental healthcare is an emerging issue. A variety of aspects of patient safety in medical care apply for patient safety in mental care as well. However, specific aspects may be different as a consequence of special characteristics of patients, setting and treatment. The aim of the present study was to combine knowledge from the field and research and bundle existing initiatives and projects to define patient safety priorities in mental healthcare in Switzerland. The present study draws on national expert panels, namely, round-table discussion and modified Delphi consensus method. Design As preparation for the modified Delphi questionnaire, two round-table discussions and one semistructured questionnaire were conducted. Preparative work was conducted between May 2015 and October 2015. The modified Delphi was conducted to gauge experts' opinion on priorities in patient safety in mental healthcare in Switzerland. In two independent rating rounds, experts made private ratings. The modified Delphi was conducted in winter 2015. Results Nine topics were defined along the treatment pathway: diagnostic errors, non-drug treatment errors, medication errors, errors related to coercive measures, errors related to aggression management against self and others, errors in treatment of suicidal patients, communication errors, errors at interfaces of care and structural errors. Conclusions Patient safety is considered as an important topic of quality in mental healthcare among experts, but it has been seriously neglected up until now. Activities in research and in practice are needed. Structural errors and diagnostics were given highest priority. From the topics identified, some are overlapping with important aspects of patient safety in medical care; however, some core aspects are unique. PMID:27496233

Streamlining Software Aspects of Certification: Report on the SSAC Survey

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Dorsey, Cheryl A.; Knight, John C.; Leveson, Nancy G.; McCormick, G. Frank

1999-01-01

The aviation system now depends on information technology more than ever before to ensure safety and efficiency. To address concerns about the efficacy of software aspects of the certification process, the Federal Aviation Administration (FAA) began the Streamlining Software Aspects of Certification (SSAC) program. The SSAC technical team was commissioned to gather data, analyze results, and propose recommendations to maximize efficiency and minimize cost and delay, without compromising safety. The technical team conducted two public workshops to identify and prioritize software approval issues, and conducted a survey to validate the most urgent of those issues. The SSAC survey, containing over two hundred questions about the FAA's software approval process, reached over four hundred industry software developers, aircraft manufacturers, and FAA designated engineering representatives. Three hundred people responded. This report presents the SSAC program rationale, survey process, preliminary findings, and recommendations.

Launching the dialogue: Safety and innovation as partners for success in advanced manufacturing.

PubMed

Geraci, C L; Tinkle, S S; Brenner, S A; Hodson, L L; Pomeroy-Carter, C A; Neu-Baker, N

2018-06-01

Emerging and novel technologies, materials, and information integrated into increasingly automated and networked manufacturing processes or into traditional manufacturing settings are enhancing the efficiency and productivity of manufacturing. Globally, there is a move toward a new era in manufacturing that is characterized by: (1) the ability to create and deliver more complex designs of products; (2) the creation and use of materials with new properties that meet a design need; (3) the employment of new technologies, such as additive and digital techniques that improve on conventional manufacturing processes; and (4) a compression of the time from initial design concept to the creation of a final product. Globally, this movement has many names, but "advanced manufacturing" has become the shorthand for this complex integration of material and technology elements that enable new ways to manufacture existing products, as well as new products emerging from new technologies and new design methods. As the breadth of activities associated with advanced manufacturing suggests, there is no single advanced manufacturing industry. Instead, aspects of advanced manufacturing can be identified across a diverse set of business sectors that use manufacturing technologies, ranging from the semiconductors and electronics to the automotive and pharmaceutical industries. The breadth and diversity of advanced manufacturing may change the occupational and environmental risk profile, challenge the basic elements of comprehensive health and safety (material, process, worker, environment, product, and general public health and safety), and provide an opportunity for development and dissemination of occupational and environmental health and safety (OEHS) guidance and best practices. It is unknown how much the risk profile of different elements of OEHS will change, thus requiring an evolution of health and safety practices. These changes may be accomplished most effectively through multi

Site Environmental Report for 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pauer, Ron O.; Baskin, David A.; Borglin, Ned K.

The annual Site Environmental Report documents Lawrence Berkeley National Laboratory’s performance in reducing its environmental impacts, progress toward cleaning up groundwater contamination, and compliance with applicable Department of Energy, federal, state, and local environmental regulations. The report is required by DOE Order 231.1B, Environment, Safety, and Health Reporting.

Regulatory Aspects on the Use of Fish Embryos in Environmental Toxicology

EPA Science Inventory

Animal alternative tests are gaining consideration in an array of environmental sciences, particularly as they relate to sound management of chemicals and wastewater discharges. The ILSI Health and Environmental Sciences Institute and the European Centre for Ecotoxicology and To...

40 CFR 258.10 - Airport safety.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Airport safety. 258.10 Section 258.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Location Restrictions § 258.10 Airport safety. (a) Owners or operators of new...

40 CFR 258.10 - Airport safety.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Airport safety. 258.10 Section 258.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Location Restrictions § 258.10 Airport safety. (a) Owners or operators of new...

A procedure for evaluating environmental impact

USGS Publications Warehouse

Leopold, Luna Bergere; Clarke, Frank Eldridge; Hanshaw, Bruce B.; Balsley, James R.

1971-01-01

The procedure does not limit the development of detail in any specific aspect of the environment; a separate expanded matrix for any environmental aspect can easily be developed within the framework provided.

Safety and Waste Management for SAM Pathogen Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

E-Alerts: Environmental pollution and control (environmental health and safety). E-mail newsletter

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Topics of discussion include the following: Effects of pollution on public health and safety; Toxicology; Industrial health; Physiology; Psychology; Clinical medicine; Radiobiology; Animals used as research experimental models.

ASPECT (Airborne Spectral Photometric Environmental Collection Technology) Fact Sheet

EPA Pesticide Factsheets

This multi-sensor screening tool provides infrared and photographic images with geospatial, chemical, and radiological data within minutes to support emergency responses, home-land security missions, environmental surveys, and climate monitoring missions.

Role of effective nurse-patient relationships in enhancing patient safety.

PubMed

Conroy, Tiffany; Feo, Rebecca; Boucaut, Rose; Alderman, Jan; Kitson, Alison

2017-08-02

Ensuring and maintaining patient safety is an essential aspect of care provision. Safety is a multidimensional concept, which incorporates interrelated elements such as physical and psychosocial safety. An effective nurse-patient relationship should ensure that these elements are considered when planning and providing care. This article discusses the importance of an effective nurse-patient relationship, as well as healthcare environments and working practices that promote safety, thus ensuring optimal patient care.

Safety and Waste Management for SAM Chemistry Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

78 FR 53245 - Safety Zone; San Diego Bayfair; Mission Bay, San Diego, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

..., Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an environmental risk to health or risk to safety that may...-AA00 Safety Zone; San Diego Bayfair; Mission Bay, San Diego, CA AGENCY: Coast Guard, DHS. ACTION...

Technological aspects of horse meat products - A review.

PubMed

Lorenzo, José M; Munekata, Paulo E S; Campagnol, Paulo Cezar Bastianello; Zhu, Zhenzhou; Alpas, Hami; Barba, Francisco J; Tomasevic, Igor

2017-12-01

Horse meat and its products can be considered as a food with a high nutritional value. However, due to cases of economically motivated food adulteration by the intentional addition of horse meat beef products in recent years, horse meat has become a controversial issue. Consumer confidence in meat products and the meat industry has diminished, although consumers consider the differences between the food content and the label as the major issue rather than the safety and nutritional characteristics of horse meat. The elaboration of meat products from horse meat (e.g. "cecina", dry-cured loin, salami, bressaola and pâté) is also an interesting alternative to other traditional meat products such as dry-cured pork hams, pork sausages and liver pâtés. In this review, the technological aspects, safety and storage stability of meat products elaborated from horse meat will be addressed by highlighting the nutritional and sensory aspects of these meat products. We aim to improve the existing knowledge about horse meat in the view of recent scandals. Copyright © 2017 Elsevier Ltd. All rights reserved.

32 CFR 989.27 - Occupational safety and health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

32 CFR 989.27 - Occupational safety and health.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

32 CFR 989.27 - Occupational safety and health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

32 CFR 989.27 - Occupational safety and health.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

32 CFR 989.27 - Occupational safety and health.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

Laboratory Safety and Management

ERIC Educational Resources Information Center

Goodenough, T. J.

1976-01-01

Explains a scientific approach to accident prevention and outlines the safety aspects associated with the handling of chemicals in the secondary school. Provides a check list of unsafe acts and conditions, outlines features of good laboratory management, and gives hints for combating the effects of inflation on science budgets. (GS)

School Climate: An Essential Component of a Comprehensive School Safety Plan

ERIC Educational Resources Information Center

Stark, Heidi

2017-01-01

The intentional assessment and management of school climate is an essential component of a comprehensive school safety plan. The value of this preventive aspect of school safety is often diminished as schools invest resources in physical security measures as a narrowly focused effort to increase school safety (Addington, 2009). This dissertation…

Hurricane Harvey, Houston's Petrochemical Industry, and US Chemical Safety Policy: Impacts to Environmental Justice Communities

NASA Astrophysics Data System (ADS)

Goldman, G. T.; Johnson, C.; Gutierrez, A.; Declet-Barreto, J.; Berman, E.; Bergman, A.

2017-12-01

When Hurricane Harvey made landfall outside Houston, Texas, the storm's wind speeds and unprecedented precipitation caused significant damage to the region's petrochemical infrastructure. Most notably, the company Arkema's Crosby facility suffered a power failure that led to explosions and incineration of six of its peroxide tanks. Chemicals released into the air from the explosions sent 15 emergency responders to the hospital with severe respiratory conditions and led to the evacuation of hundreds of surrounding households. Other petrochemical facilities faced other damages that resulted in unsafe and acute chemical releases into the air and water. What impacts did such chemical disasters have on the surrounding communities and emergency responders during Harvey's aftermath? What steps might companies have taken to prevent such chemical releases? And what chemical safety policies might have ensured that such disaster risks were mitigated? In this talk we will report on a survey of the extent of damage to Houston's oil and gas infrastructure and related chemical releases and discuss the role of federal chemical safety policy in preventing and mitigating the potential for such risks for future storms and other extreme weather and climate events. We will also discuss how these chemical disasters created acute toxics exposures on environmental justice communities already overburdened with chronic exposures from the petrochemical industry.

Does the concept of safety culture help or hinder systems thinking in safety?

PubMed

Reiman, Teemu; Rollenhagen, Carl

2014-07-01

The concept of safety culture has become established in safety management applications in all major safety-critical domains. The idea that safety culture somehow represents a "systemic view" on safety is seldom explicitly spoken out, but nevertheless seem to linger behind many safety culture discourses. However, in this paper we argue that the "new" contribution to safety management from safety culture never really became integrated with classical engineering principles and concepts. This integration would have been necessary for the development of a more genuine systems-oriented view on safety; e.g. a conception of safety in which human, technological, organisational and cultural factors are understood as mutually interacting elements. Without of this integration, researchers and the users of the various tools and methods associated with safety culture have sometimes fostered a belief that "safety culture" in fact represents such a systemic view about safety. This belief is, however, not backed up by theoretical or empirical evidence. It is true that safety culture, at least in some sense, represents a holistic term-a totality of factors that include human, organisational and technological aspects. However, the departure for such safety culture models is still human and organisational factors rather than technology (or safety) itself. The aim of this paper is to critically review the various uses of the concept of safety culture as representing a systemic view on safety. The article will take a look at the concepts of culture and safety culture based on previous studies, and outlines in more detail the theoretical challenges in safety culture as a systems concept. The paper also presents recommendations on how to make safety culture more systemic. Copyright © 2013 Elsevier Ltd. All rights reserved.

Towards safety, hygiene and environmental (SHE) management in African small and medium companies.

PubMed

Meité, Vaflahi; Baeyens, Jan; Dewil, Raf

2009-03-01

Although Safety, Health and Environment (SHE) principles are adhered to in companies of developed countries, the application in developing countries is at its infant stage, as shown by the present article where the authors surveyed SHE Practice in 242 companies of 8 West-African countries. The survey demonstrated that (i) the overall performances are poor, although significant improvement can be achieved with a minimum of goodwill and management support; (ii) despite financial difficulties faced by small and medium enterprises (SME), SHE management is a must and should start with a pollution prevention program that will vary with individual needs but some conscious planning effort is always necessary; (iii) it is necessary to prepare for appropriate actions for pollution abatement, adapted to the existing and future production facilities. Although the recorded results are rather poor, there are obviously many possibilities of improvement, with a little goodwill of the SME managers and supervisors. Reaching a standard level of the environmental management is a long but an important process.

Multi-Level Aspects of Social Cohesion of Secondary Schools and Pupils' Feelings of Safety

ERIC Educational Resources Information Center

Mooij, Ton; Smeets, Ed; de Wit, Wouter

2011-01-01

Background: School safety and corresponding feelings of both pupils and school staff are beginning to receive more and more attention. The social cohesion characteristics of a school may be useful in promoting feelings of safety, particularly in pupils. Aims: To conceptualize theoretically, and check empirically a two-level model of social…

Evaluating Environmental Chemistry Textbooks.

ERIC Educational Resources Information Center

Hites, Ronald A.

2001-01-01

A director of the Indiana University Center for Environmental Science Research reviews textbooks on environmental chemistry. Highlights clear writing, intellectual depth, presence of problem sets covering both the qualitative and quantitative aspects of the material, and full coverage of the topics of concern. Discusses the director's own approach…

General Safety and Waste Management Related to SAM

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for chemicals, radiochemicals, pathogens, and biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Patient safety priorities in mental healthcare in Switzerland: a modified Delphi study.

PubMed

Mascherek, Anna C; Schwappach, David L B

2016-08-05

Identifying patient safety priorities in mental healthcare is an emerging issue. A variety of aspects of patient safety in medical care apply for patient safety in mental care as well. However, specific aspects may be different as a consequence of special characteristics of patients, setting and treatment. The aim of the present study was to combine knowledge from the field and research and bundle existing initiatives and projects to define patient safety priorities in mental healthcare in Switzerland. The present study draws on national expert panels, namely, round-table discussion and modified Delphi consensus method. As preparation for the modified Delphi questionnaire, two round-table discussions and one semistructured questionnaire were conducted. Preparative work was conducted between May 2015 and October 2015. The modified Delphi was conducted to gauge experts' opinion on priorities in patient safety in mental healthcare in Switzerland. In two independent rating rounds, experts made private ratings. The modified Delphi was conducted in winter 2015. Nine topics were defined along the treatment pathway: diagnostic errors, non-drug treatment errors, medication errors, errors related to coercive measures, errors related to aggression management against self and others, errors in treatment of suicidal patients, communication errors, errors at interfaces of care and structural errors. Patient safety is considered as an important topic of quality in mental healthcare among experts, but it has been seriously neglected up until now. Activities in research and in practice are needed. Structural errors and diagnostics were given highest priority. From the topics identified, some are overlapping with important aspects of patient safety in medical care; however, some core aspects are unique. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Measurement tools and outcome measures used in transitional patient safety; a systematic review.

PubMed

van Melle, Marije A; van Stel, Henk F; Poldervaart, Judith M; de Wit, Niek J; Zwart, Dorien L M

2018-01-01

Patients are at risk for harm when treated simultaneously by healthcare providers from different healthcare organisations. To assess current practice and improvements of transitional patient safety, valid measurement tools are needed. To identify and appraise all measurement tools and outcomes that measure aspects of transitional patient safety, PubMed, Cinahl, Embase and Psychinfo were systematically searched. Two researchers performed the title and abstract and full-text selection. First, publications about validation of measurement tools were appraised for quality following COSMIN criteria. Second, we inventoried all measurement tools and outcome measures found in our search that assessed current transitional patient safety or the effect of interventions targeting transitional patient safety. The initial search yielded 8288 studies, of which 18 assessed validity of measurement tools of different aspects of transitional safety, and 191 assessed current transitional patient safety or effect of interventions. In the validated measurement tools, the overall quality of content and structural validity was acceptable; other COSMIN criteria, such as reliability, measurement error and responsiveness, were mostly poor or not reported. In our outcome inventory, the most frequently used validated outcome measure was the Care Transition Measure (n = 9). The most frequently used non-validated outcome measures were: medication discrepancies (n = 98), hospital readmissions (n = 55), adverse events (n = 34), emergency department visits (n = 33), (mental or physical) health status (n = 28), quality and timeliness of discharge summary, and patient satisfaction (n = 23). Although no validated measures exist that assess all aspects of transitional patient safety, we found validated measurement tools on specific aspects. Reporting of validity of transitional measurement tools was incomplete. Numerous outcome measures with unknown measurement properties are used in current studies on

Redefining the Federal Role of Public-Funded Environmental Research: Identifying Critical Attributes for Sustainability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Gerald G.; Sink, CLaire H.; Howes, Walter S.

2000-09-25

For the past fifty years, U.S. science and technology policy has been based on Vannevar Bush s classic report, Science--The Endless Frontier. As the U.S. enters the 21st century, public funding for environmental research and development (R&D) in achieving environmental sustainability is crucial to the nation s economic and overall well being. In domestic environmental remediation, the U.S. Department of Energy Office of Environmental Management (DOE EM) is committed to cleaning up DOE sites contaminated with radioactive, chemical, and other hazardous wastes. To best accomplish this mission amid fiscal and regulatory regimes and to promote long-term environmental sustainability requires improvedmore » interdisciplinary collaboration among R&D performers--universities, industry, and federal laboratories--as well as advances in environmental science and technology. Public funding for interdisciplinary long-term environmental R&D is essential as no long-term approach to environmental R&D exists. With increased awareness of the rapidity of global technological change and the impact of this change on humans and the earth s ecosystem, it is timely to identify, evaluate, and establish critical attributes as characteristics of long-term environmental sustainability for facilitating a broad science and technology policy. For environmental R&D, these attributes are functionally grouped into R&D performers, operational aspects, and technology-related aspects. Individually, each attribute addresses a specific need; collectively, they create a strategy to achieve long-term sustainability. Most of the attributes are commonplace in today s R&D community; the uniqueness is their integration into an overall system as suggested. Added value for environmental R&D would address the attributes collectively to provide overall synergy. As the U.S. enters the 21st century and adapts to increased globalization, addressing the consequences of humans and environmental interactions is

Fundamentals of quality and safety in diagnostic radiology.

PubMed

Bruno, Michael A; Nagy, Paul

2014-12-01

The most fundamental aspects of quality and safety in radiology are reviewed, including a brief history of the quality and safety movement as applied to radiology, the overarching considerations of organizational culture, team building, choosing appropriate goals and metrics, and the radiologist's quality "tool kit." Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Safety and Security at School: A Pedagogical Perspective

ERIC Educational Resources Information Center

de Waal, Elda; Grosser, M. M.

2009-01-01

Education law and policy currently focus on broader physical aspects of safety and security at schools, as well as, for example, on pedagogical insecurity such as is caused by discriminatory teaching, but law and policy have yet to pay attention to the overall and far-reaching pedagogical safety and security of learners. By means of a descriptive…

Ibero⁻American Consensus on Low- and No-Calorie Sweeteners: Safety, Nutritional Aspects and Benefits in Food and Beverages.

PubMed

Serra-Majem, Lluis; Raposo, António; Aranceta-Bartrina, Javier; Varela-Moreiras, Gregorio; Logue, Caomhan; Laviada, Hugo; Socolovsky, Susana; Pérez-Rodrigo, Carmen; Aldrete-Velasco, Jorge Antonio; Meneses Sierra, Eduardo; López-García, Rebeca; Ortiz-Andrellucchi, Adriana; Gómez-Candela, Carmen; Abreu, Rodrigo; Alexanderson, Erick; Álvarez-Álvarez, Rolando Joel; Álvarez Falcón, Ana Luisa; Anadón, Arturo; Bellisle, France; Beristain-Navarrete, Ina Alejandra; Blasco Redondo, Raquel; Bochicchio, Tommaso; Camolas, José; Cardini, Fernando G; Carocho, Márcio; Costa, Maria do Céu; Drewnowski, Adam; Durán, Samuel; Faundes, Víctor; Fernández-Condori, Roxana; García-Luna, Pedro P; Garnica, Juan Carlos; González-Gross, Marcela; La Vecchia, Carlo; Leis, Rosaura; López-Sobaler, Ana María; Madero, Miguel Agustín; Marcos, Ascensión; Mariscal Ramírez, Luis Alfonso; Martyn, Danika M; Mistura, Lorenza; Moreno Rojas, Rafael; Moreno Villares, José Manuel; Niño-Cruz, José Antonio; Oliveira, María Beatriz P P; Palacios Gil-Antuñano, Nieves; Pérez-Castells, Lucía; Ribas-Barba, Lourdes; Rincón Pedrero, Rodolfo; Riobó, Pilar; Rivera Medina, Juan; Tinoco de Faria, Catarina; Valdés-Ramos, Roxana; Vasco, Elsa; Wac, Sandra N; Wakida, Guillermo; Wanden-Berghe, Carmina; Xóchihua Díaz, Luis; Zúñiga-Guajardo, Sergio; Pyrogianni, Vasiliki; Cunha Velho de Sousa, Sérgio

2018-06-25

International scientific experts in food, nutrition, dietetics, endocrinology, physical activity, paediatrics, nursing, toxicology and public health met in Lisbon on 2⁻4 July 2017 to develop a Consensus on the use of low- and no-calorie sweeteners (LNCS) as substitutes for sugars and other caloric sweeteners. LNCS are food additives that are broadly used as sugar substitutes to sweeten foods and beverages with the addition of fewer or no calories. They are also used in medicines, health-care products, such as toothpaste, and food supplements. The goal of this Consensus was to provide a useful, evidence-based, point of reference to assist in efforts to reduce free sugars consumption in line with current international public health recommendations. Participating experts in the Lisbon Consensus analysed and evaluated the evidence in relation to the role of LNCS in food safety, their regulation and the nutritional and dietary aspects of their use in foods and beverages. The conclusions of this Consensus were: (1) LNCS are some of the most extensively evaluated dietary constituents, and their safety has been reviewed and confirmed by regulatory bodies globally including the World Health Organisation, the US Food and Drug Administration and the European Food Safety Authority; (2) Consumer education, which is based on the most robust scientific evidence and regulatory processes, on the use of products containing LNCS should be strengthened in a comprehensive and objective way; (3) The use of LNCS in weight reduction programmes that involve replacing caloric sweeteners with LNCS in the context of structured diet plans may favour sustainable weight reduction. Furthermore, their use in diabetes management programmes may contribute to a better glycaemic control in patients, albeit with modest results. LNCS also provide dental health benefits when used in place of free sugars; (4) It is proposed that foods and beverages with LNCS could be included in dietary guidelines as

Understanding the relationship between safety investment and safety performance of construction projects through agent-based modeling.

PubMed

Lu, Miaojia; Cheung, Clara Man; Li, Heng; Hsu, Shu-Chien

2016-09-01

The construction industry in Hong Kong increased its safety investment by 300% in the past two decades; however, its accident rate has plateaued to around 50% for one decade. Against this backdrop, researchers have found inconclusive results on the causal relationship between safety investment and safety performance. Using agent-based modeling, this study takes an unconventional bottom-up approach to study safety performance on a construction site as an outcome of a complex system defined by interactions among a worksite, individual construction workers, and different safety investments. Instead of focusing on finding the absolute relationship between safety investment and safety performance, this study contributes to providing a practical framework to investigate how different safety investments interacting with different parameters such as human and environmental factors could affect safety performance. As a result, we could identify cost-effective safety investments under different construction scenarios for delivering optimal safety performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

7 CFR 1709.17 - Environmental review.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Environmental review. 1709.17 Section 1709.17... AGRICULTURE ASSISTANCE TO HIGH ENERGY COST COMMUNITIES General Requirements § 1709.17 Environmental review. (a.... (b) Applicants must address environmental aspects of their projects in the grant application in...

7 CFR 1709.17 - Environmental review.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Environmental review. 1709.17 Section 1709.17... AGRICULTURE ASSISTANCE TO HIGH ENERGY COST COMMUNITIES General Requirements § 1709.17 Environmental review. (a.... (b) Applicants must address environmental aspects of their projects in the grant application in...

Environmental Assessment for Construction of Multiple Roadway Improvement Projects MacDill AFB, Florida

DTIC Science & Technology

2011-01-01

flooded) is within tidal areas and occurs mainly on mangrove areas . These soils are subject to Affected Environment Environmental Assessment for...requires that Federal agencies identify and assess environmental health and safety risks that might disproportionately affect children. The Proposed...Action would not pose any adverse or disproportionate environmental health or safety risks to children living near the base. Safety precautions

Substance Use and Health and Safety among Homeless Youth

ERIC Educational Resources Information Center

Rhule-Louie, Dana M.; Bowen, Sarah; Baer, John S.; Peterson, Peggy L.

2008-01-01

This study examines how substance use is associated with the health and safety of homeless youth using cross-sectional, self-report data from 285 homeless adolescents. Path models were used to examine concurrent relationships between youth's substance use and multiple aspects of their health and safety, including measures of psychological…

Watershed safety and quality control by safety threshold method

NASA Astrophysics Data System (ADS)

Da-Wei Tsai, David; Mengjung Chou, Caroline; Ramaraj, Rameshprabu; Liu, Wen-Cheng; Honglay Chen, Paris

2014-05-01

Taiwan was warned as one of the most dangerous countries by IPCC and the World Bank. In such an exceptional and perilous island, we would like to launch the strategic research of land-use management on the catastrophe prevention and environmental protection. This study used the watershed management by "Safety Threshold Method" to restore and to prevent the disasters and pollution on island. For the deluge prevention, this study applied the restoration strategy to reduce total runoff which was equilibrium to 59.4% of the infiltration each year. For the sediment management, safety threshold management could reduce the sediment below the equilibrium of the natural sediment cycle. In the water quality issues, the best strategies exhibited the significant total load reductions of 10% in carbon (BOD5), 15% in nitrogen (nitrate) and 9% in phosphorus (TP). We found out the water quality could meet the BOD target by the 50% peak reduction with management. All the simulations demonstrated the safety threshold method was helpful to control the loadings within the safe range of disasters and environmental quality. Moreover, from the historical data of whole island, the past deforestation policy and the mistake economic projects were the prime culprits. Consequently, this study showed a practical method to manage both the disasters and pollution in a watershed scale by the land-use management.

Analysis of Economic and Environmental Aspects of Microalgae Biorefinery for Biofuels Production: A Review.

PubMed

Chia, Shir Reen; Chew, Kit Wayne; Show, Pau Loke; Yap, Yee Jiun; Ong, Hwai Chyuan; Ling, Tau Chuan; Chang, Jo-Shu

2018-06-01

Microalgae are considered promising feedstock for the production of biofuels and other bioactive compounds, yet there are still challenges on commercial applications of microalgae-based products. This review focuses on the economic analysis, environmental impact, and industrial potential of biofuels production from microalgae. The cost of biofuels production remains higher compared to conventional fuel sources. However, integration of biorefinery pathways with biofuels production for the recovery of value-added products (such as antioxidants, natural dyes, cosmetics, nutritional supplements, polyunsaturated fatty acids, and so forth) could substantially reduce the production costs. It also paves the way for sustainable energy resources by significantly reducing the emissions of CO 2 , NO x , SO x , and heavy metals. Large-scale biofuels production has yet to be successfully commercialized with many roadblocks ahead and heavy competition with conventional fuel feedstock as well as technological aspects. One of the prominent challenges is to develop a cost-effective method to achieve high-density microalgal cultivation on an industrial scale. The biofuels industry should be boosted by Government's support in the form of subsidies and incentives, for addressing the pressing climate change issues, achieving sustainability, and energy security. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Lead Poisoning: Historical Aspects of a Paradigmatic "Occupational and Environmental Disease"

PubMed Central

Lafranconi, Alessandra; D'Orso, Marco Italo; Cesana, Giancarlo

2012-01-01

Lead poisoning is one of the earliest identified and most known occupational disease. Its acute effects have been recognized from antiquity when this condition principally afflicted manual workers and slaves, actually scarcely considered by the medicine of that time. The Industrial Revolution caused an epidemic of metal intoxication, urging scientists and physician of that period to study and identify specific symptoms and organ alterations related to chronic lead poisoning. During the 20th century, the acknowledgment of occupational and environmental toxicity of lead fostered public awareness and legislation to protect health. More recently, the identification of sub-clinical effects have greatly modified the concept of lead poisoning and the approaches of medicine towards this condition. Nowadays, lead poisoning is rarely seen in developed countries, but it still represents a major environmental problem in certain areas. Consequently, it may appear as a paradigm of "occupational and environmental disease," and the history of this condition seems to parallel the historical development of modern "Occupational and Environmental Health" as a more complete medical discipline. PMID:22953225

78 FR 39610 - Safety Zone; Big Bay Boom, San Diego Bay; San Diego, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

..., Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an environmental risk to health or risk to safety that may...-AA00 Safety Zone; Big Bay Boom, San Diego Bay; San Diego, CA AGENCY: Coast Guard, DHS. ACTION...

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2013 CFR

2013-07-01

... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2014 CFR

2014-07-01

... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2011 CFR

2011-07-01

... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2012 CFR

2012-07-01

... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

Occupational health and safety aspects of animal handling in dairy production.

PubMed

Lindahl, Cecilia; Lundqvist, Peter; Hagevoort, G Robert; Lunner Kolstrup, Christina; Douphrate, David I; Pinzke, Stefan; Grandin, Temple

2013-01-01

Livestock handling in dairy production is associated with a number of health and safety issues. A large number of fatal and nonfatal injuries still occur when handling livestock. The many animal handling tasks on a dairy farm include moving cattle between different locations, vaccination, administration of medication, hoof care, artificial insemination, ear tagging, milking, and loading onto trucks. There are particular problems with bulls, which continue to cause considerable numbers of injuries and fatalities in dairy production. In order to reduce the number of injuries during animal handling on dairy farms, it is important to understand the key factors in human-animal interactions. These include handler attitudes and behavior, animal behavior, and fear in cows. Care when in close proximity to the animal is the key for safe handling, including knowledge of the flight zone, and use of the right types of tools and suitable restraint equipment. Thus, in order to create safe working conditions during livestock handling, it is important to provide handlers with adequate training and to establish sound safety management procedures on the farm.

Environmental Aspects of Dredging: What About Air Quality?

DTIC Science & Technology

2009-01-01

District, IL, 61204, PH (309) 794-5735 ext.6108, FAX: (309) 794-5 5712, email: mark.j.anderson@usace.army.mil 6 2Civil & Environmental Engineering Dept...Michigan Tech University , Houghton, MI 7 49931, PH: (906) 487-1981, FAX: (906) 487-2943, email: barkdoll@mtu.edu 8 9 ABSTRACT 10 Dredging has...the U. S. Army Corps of Engineers (USACE) dredged a total of 26 204.2 million cubic yards (CY) of sediment (NDC 2007). Navigation maintenance 27

Current state of nuclear fuel cycles in nuclear engineering and trends in their development according to the environmental safety requirements

NASA Astrophysics Data System (ADS)

Vislov, I. S.; Pischulin, V. P.; Kladiev, S. N.; Slobodyan, S. M.

2016-08-01

The state and trends in the development of nuclear fuel cycles in nuclear engineering, taking into account the ecological aspects of using nuclear power plants, are considered. An analysis of advantages and disadvantages of nuclear engineering, compared with thermal engineering based on organic fuel types, was carried out. Spent nuclear fuel (SNF) reprocessing is an important task in the nuclear industry, since fuel unloaded from modern reactors of any type contains a large amount of radioactive elements that are harmful to the environment. On the other hand, the newly generated isotopes of uranium and plutonium should be reused to fabricate new nuclear fuel. The spent nuclear fuel also includes other types of fission products. Conditions for SNF handling are determined by ecological and economic factors. When choosing a certain handling method, one should assess these factors at all stages of its implementation. There are two main methods of SNF handling: open nuclear fuel cycle, with spent nuclear fuel assemblies (NFAs) that are held in storage facilities with their consequent disposal, and closed nuclear fuel cycle, with separation of uranium and plutonium, their purification from fission products, and use for producing new fuel batches. The development of effective closed fuel cycles using mixed uranium-plutonium fuel can provide a successful development of the nuclear industry only under the conditions of implementation of novel effective technological treatment processes that meet strict requirements of environmental safety and reliability of process equipment being applied. The diversity of technological processes is determined by different types of NFA devices and construction materials being used, as well as by the composition that depends on nuclear fuel components and operational conditions for assemblies in the nuclear power reactor. This work provides an overview of technological processes of SNF treatment and methods of handling of nuclear fuel

A big picture look at big coal: Teaching students to link societal and environmental issues

NASA Astrophysics Data System (ADS)

Sojka, S. L.

2014-12-01

The environmental impact of coal mining and burning of coal is evident and generally easy to understand. However, students often struggle to understand the social impacts of coal mining. A jigsaw activity culminating in a mock town hall meeting helps students link social, economic and environmental impacts of coal mining. Students are divided into four groups and assigned the task of researching the environmental, social, economic or health impacts of coal mining in West Virginia. When students have completed the research, they are assigned a role for the town hall. Roles include local community members, direct employees of the coal industry, business owners from industries related to coal mining, and environmentalists. One student from each research area is assigned to each role, forcing students to consider environmental, social, health and economic aspects of coal mining in choosing an appropriate position for their role. Students have 30 minutes to prepare their positions and then present for 2-5 minutes in the simulated town hall. We then have open class discussion and review the positions. Finally, students are required to write a letter to the editor of the local paper. The specific topic for the town hall and letters can be varied based on current events and could include new regulations on power plants, mine safety, government funding of alternative energy supplies or a range of other topics. This approach forces students to consider all aspects of the issue. In addition, because students have to assume a role, they are more aware of the direct impact that coal mining has on individuals' lives.

Environmental Screening of Electrode Materials for a Rechargeable Aluminum Battery with an AlCl₃/EMIMCl Electrolyte.

PubMed

Ellingsen, Linda Ager-Wick; Holland, Alex; Drillet, Jean-Francois; Peters, Willi; Eckert, Martin; Concepcion, Carlos; Ruiz, Oscar; Colin, Jean-François; Knipping, Etienne; Pan, Qiaoyan; Wills, Richard G A; Majeau-Bettez, Guillaume

2018-06-01

Recently, rechargeable aluminum batteries have received much attention due to their low cost, easy operation, and high safety. As the research into rechargeable aluminum batteries with a room-temperature ionic liquid electrolyte is relatively new, research efforts have focused on finding suitable electrode materials. An understanding of the environmental aspects of electrode materials is essential to make informed and conscious decisions in aluminum battery development. The purpose of this study was to evaluate and compare the relative environmental performance of electrode material candidates for rechargeable aluminum batteries with an AlCl₃/EMIMCl (1-ethyl-3-methylimidazolium chloride) room-temperature ionic liquid electrolyte. To this end, we used a lifecycle environmental screening framework to evaluate 12 candidate electrode materials. We found that all of the studied materials are associated with one or more drawbacks and therefore do not represent a "silver bullet" for the aluminum battery. Even so, some materials appeared more promising than others did. We also found that aluminum battery technology is likely to face some of the same environmental challenges as Li-ion technology but also offers an opportunity to avoid others. The insights provided here can aid aluminum battery development in an environmentally sustainable direction.

Environmental assessment overview

NASA Technical Reports Server (NTRS)

Valentino, A. R.

1980-01-01

The assessment program has as its objectives: to identify the environmental issues associated with the SPS Reference System; to prepare a preliminary assessment based on existing data; to suggest mitigating strategies and provide environmental data and guidance to other components of the program as required; and to plan long-range research to reduce the uncertainty in the preliminary assessment. The key environmental issues associated with the satellite power system are discussed and include human health and safety, ecosystems, climate, and interaction with electromagnetic systems.

The Safety of Crowds

ERIC Educational Resources Information Center

Dron, Jon

2007-01-01

If we assume that learning is best achieved in a social setting, then a vital aspect of any learning environment is its ability to support the development of trust. Trust takes many forms, from helping to identify the validity or the effectiveness of a learning resource to feelings of safety and reliance on support from fellow learners and…

77 FR 22358 - Occupational Safety and Health Administration

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... DEPARTMENT OF LABOR Occupational Safety and Health Administration Preparations for the 23rd...: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: OSHA... health, physical, and environmental effects. It also provides harmonized communication elements...

Quantitative relationships between occupant satisfaction and satisfaction aspects of indoor environmental quality and building design.

PubMed

Frontczak, M; Schiavon, S; Goins, J; Arens, E; Zhang, H; Wargocki, P

2012-04-01

The article examines which subjectively evaluated indoor environmental parameters and building features mostly affect occupants' satisfaction in mainly US office buildings. The study analyzed data from a web-based survey administered to 52,980 occupants in 351 office buildings over 10 years by the Center for the Built Environment. The survey uses 7-point ordered scale questions pertaining to satisfaction with indoor environmental parameters, workspace, and building features. The average building occupant was satisfied with his/her workspace and building. Proportional odds ordinal logistic regression shows that satisfaction with all 15 parameters listed in the survey contributed significantly to overall workspace satisfaction. The most important parameters were satisfaction with amount of space (odds ratio OR 1.57, 95% CI: 1.55-1.59), noise level (OR 1.27, 95% CI: 1.25-1.29), and visual privacy (OR 1.26, 95% CI: 1.24-1.28). Satisfaction with amount of space was ranked to be most important for workspace satisfaction, regardless of age group (below 30, 31-50 or over 50 years old), gender, type of office (single or shared offices, or cubicles), distance of workspace from a window (within 4.6 m or further), or satisfaction level with workspace (satisfied or dissatisfied). Satisfaction with amount of space was not related to the gross amount of space available per person. To maximize workspace satisfaction, designer should invest in aspects that increase satisfaction with amount of space and storage, noise level, and visual privacy. Office workers will be most satisfied with their workspace and building when located close to a window in a private office. This may affect job satisfaction, work performance, and personal and company productivity. © 2011 John Wiley & Sons A/S.

European Workshop Industrical Computer Science Systems approach to design for safety

NASA Technical Reports Server (NTRS)

Zalewski, Janusz

1992-01-01

This paper presents guidelines on designing systems for safety, developed by the Technical Committee 7 on Reliability and Safety of the European Workshop on Industrial Computer Systems. The focus is on complementing the traditional development process by adding the following four steps: (1) overall safety analysis; (2) analysis of the functional specifications; (3) designing for safety; (4) validation of design. Quantitative assessment of safety is possible by means of a modular questionnaire covering various aspects of the major stages of system development.

Comprehensive evaluation of environmental and economic benefits of China's urban underground transportation construction projects.

PubMed

Yang, Xiaobin; Chen, Zhilong; Guo, Dongjun

2015-07-01

Urban underground transportation projects are introduced to address problems of scarce green land and traffic pollution. As construction of urban underground transportation is still in its infancy, there is no definite quantitative measurement on whether the construction is beneficial and what influences it will place on the region in China. This study intends to construct a comprehensive evaluation method for evaluating social, economic and environmental benefits of urban underground transportation projects and proposes the concept, role and principle for evaluation of environmental and economic benefits. It figures out relationship between the environment and factors of city development. It also summarizes three relevant factors, including transportation, biophysics and social economy, and works out indicators to evaluate the influence of urban underground transportation construction. Based on Contingent Valuation Method (CVM), Cost of Illness Approach (CIA), Human Capital Approach (HCA), this paper constructs 13 monetization calculation models for social, economic and environmental benefits in response to seven aspects, namely, reducing noise pollution and air pollution, using land efficiently, improving traffic safety, reducing traffic congestion, saving shipping time and minimizing transportation costs.

TESPI (Tool for Environmental Sound Product Innovation): a simplified software tool to support environmentally conscious design in SMEs

NASA Astrophysics Data System (ADS)

Misceo, Monica; Buonamici, Roberto; Buttol, Patrizia; Naldesi, Luciano; Grimaldi, Filomena; Rinaldi, Caterina

2004-12-01

TESPI (Tool for Environmental Sound Product Innovation) is the prototype of a software tool developed within the framework of the "eLCA" project. The project, (www.elca.enea.it)financed by the European Commission, is realising "On line green tools and services for Small and Medium sized Enterprises (SMEs)". The implementation by SMEs of environmental product innovation (as fostered by the European Integrated Product Policy, IPP) needs specific adaptation to their economic model, their knowledge of production and management processes and their relationships with innovation and the environment. In particular, quality and costs are the main driving forces of innovation in European SMEs, and well known barriers exist to the adoption of an environmental approach in the product design. Starting from these considerations, the TESPI tool has been developed to support the first steps of product design taking into account both the quality and the environment. Two main issues have been considered: (i) classic Quality Function Deployment (QFD) can hardly be proposed to SMEs; (ii) the environmental aspects of the product life cycle need to be integrated with the quality approach. TESPI is a user friendly web-based tool, has a training approach and applies to modular products. Users are guided through the investigation of the quality aspects of their product (customer"s needs and requirements fulfilment) and the identification of the key environmental aspects in the product"s life cycle. A simplified check list allows analyzing the environmental performance of the product. Help is available for a better understanding of the analysis criteria. As a result, the significant aspects for the redesign of the product are identified.

Multi-level aspects of social cohesion of secondary schools and pupils' feelings of safety.

PubMed

Mooij, Ton; Smeets, Ed; de Wit, Wouter

2011-09-01

BACKGROUND. School safety and corresponding feelings of both pupils and school staff are beginning to receive more and more attention. The social cohesion characteristics of a school may be useful in promoting feelings of safety, particularly in pupils. AIMS. To conceptualize theoretically, and check empirically a two-level model of social cohesion between and within schools, in order to explain a pupil's feelings of safety at school. SAMPLES. Data were collected aided by a national Dutch survey in secondary education carried out via the Internet. In 2008, digital questionnaires were completed by about 78,800 pupils, 6,200 teachers and educational support staff, and 600 school managers. METHODS. Data were checked for reliability and representativity. Social cohesion was indicated by self-reported measures of individual pupils and by aggregating scale and item scores of school managers, teachers, and other support staff within schools. Multi-level analysis using individual pupil data and school-level data was performed using MLwiN. RESULTS. A pupil's age, educational attainment level, experience of mild physical violence, prosocial rules of conduct and joint control of these rules, and school measures against playing truant, show positive influences on a pupil's feelings of safety at school. Negative influences are exerted by not feeling most at home in The Netherlands, peers taking drugs and weapons into school, and by experiencing social violence, severe physical violence, and sexual violence. Negative school effects exist simultaneously in severe physical violence experienced by teachers and other staff, and in curriculum differentiation applied by teachers and other staff; a positive school effect is school size. Some interaction effects between pupil and school-level variables were explored. CONCLUSIONS. The variance at school level is relatively low compared with the variance at pupil level. However, a much higher percentage of variance at school level than at

16 CFR 1021.14 - Environmental impact statement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 1021.14 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ENVIRONMENTAL REVIEW Contents of Environmental Review Documents § 1021.14 Environmental impact statement. (a) Draft and final... which are not effects on the natural or physical environment, but rather are, for example, purely...

The effect of organisational culture on patient safety.

PubMed

Kaufman, Gerri; McCaughan, Dorothy

This article explores the links between organisational culture and patient safety. The key elements associated with a safety culture, most notably effective leadership, good teamwork, a culture of learning and fairness, and fostering patient-centred care, are discussed. The broader aspects of a systems approach to promoting quality and safety, with specific reference to clinical governance, human factors, and ergonomics principles and methods, are also briefly explored, particularly in light of the report of the public inquiry into care failings at Mid Staffordshire NHS Foundation Trust.

Environmental Performance Report 2013: Annual Site Environmental Report per the U.S. Department of Energy Order 231.1-1B (Management Publication)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlomberg, K.; Eickhoff, J.; Beatty, B.

The National Renewable Energy Laboratory's (NREL's) Environmental Performance Report provides a description of the laboratory's environmental management activities for 2013, including information on environmental and sustainability performance, environmental compliance activities and status, and environmental protection programs, highlights, and successes. The purpose of this report is to ensure that U.S. Department of Energy (DOE) and the public receive timely, accurate information about events that have affected or could adversely affect the health, safety, and security of the public or workers; the environment; or the operations of DOE facilities. This report meets the requirements of the Annual Site Environmental Report and ismore » prepared in accordance with the DOE Order 231.1B, Environment, Safety and Health Reporting.« less

Meat inspection of reindeer - a rich source of data for monitoring food safety and animal and environmental health in Sweden.

PubMed

Kautto, Arja Helena; Vågsholm, Ivar; Niskanen, Rauni

2017-01-01

Background : ​This study scrutinized carcass conditions recorded in post mortem inspections (PMI) of reindeer ( Rangifer tarandus tarandus , L.) during 2015-2016 because of the importance for monitoring food safety and animal and environmental health threats. Material and methods : PMI results were retrieved from the National Food Agency. A negative binomial regression model was applied. For actual parameters, incident risk rate (IRR) with confidence intervals was calculated. Results and discussion : The number of conditions found in PMI varied widely between years and batches. The most common conditions (43 and 57% of all reindeer slaughtered in 2015 and 2016, respectively) derived from non-zoonotic parasites as the most abundant one, Hypoderma tarandi. Setaria sp. as well as both inflammatory processes and trauma were found in low prevalences. Further investigation of interactions with slaughterhouse size and inspector experience is needed. The conditions found rarely indicated food safety hazards and no epizooties or zoonoses have been recorded in the past two decades. Visual PMI with complementary sampling for specific hazards in slaughterhouses could thus be a helpful tool for monitoring the health and welfare of the reindeer population, the food safety risks with reindeer meat, and the status of the environment. ​.

Integration of environmental aspects in modelling and optimisation of water supply chains.

PubMed

Koleva, Mariya N; Calderón, Andrés J; Zhang, Di; Styan, Craig A; Papageorgiou, Lazaros G

2018-04-26

Climate change becomes increasingly more relevant in the context of water systems planning. Tools are necessary to provide the most economic investment option considering the reliability of the infrastructure from technical and environmental perspectives. Accordingly, in this work, an optimisation approach, formulated as a spatially-explicit multi-period Mixed Integer Linear Programming (MILP) model, is proposed for the design of water supply chains at regional and national scales. The optimisation framework encompasses decisions such as installation of new purification plants, capacity expansion, and raw water trading schemes. The objective is to minimise the total cost incurring from capital and operating expenditures. Assessment of available resources for withdrawal is performed based on hydrological balances, governmental rules and sustainable limits. In the light of the increasing importance of reliability of water supply, a second objective, seeking to maximise the reliability of the supply chains, is introduced. The epsilon-constraint method is used as a solution procedure for the multi-objective formulation. Nash bargaining approach is applied to investigate the fair trade-offs between the two objectives and find the Pareto optimality. The models' capability is addressed through a case study based on Australia. The impact of variability in key input parameters is tackled through the implementation of a rigorous global sensitivity analysis (GSA). The findings suggest that variations in water demand can be more disruptive for the water supply chain than scenarios in which rainfalls are reduced. The frameworks can facilitate governmental multi-aspect decision making processes for the adequate and strategic investments of regional water supply infrastructure. Copyright © 2018. Published by Elsevier B.V.

Risk and safety perception on urban and rural roads: Effects of environmental features, driver age and risk sensitivity.

PubMed

Cox, Jolene A; Beanland, Vanessa; Filtness, Ashleigh J

2017-10-03

The ability to detect changing visual information is a vital component of safe driving. In addition to detecting changing visual information, drivers must also interpret its relevance to safety. Environmental changes considered to have high safety relevance will likely demand greater attention and more timely responses than those considered to have lower safety relevance. The aim of this study was to explore factors that are likely to influence perceptions of risk and safety regarding changing visual information in the driving environment. Factors explored were the environment in which the change occurs (i.e., urban vs. rural), the type of object that changes, and the driver's age, experience, and risk sensitivity. Sixty-three licensed drivers aged 18-70 years completed a hazard rating task, which required them to rate the perceived hazardousness of changing specific elements within urban and rural driving environments. Three attributes of potential hazards were systematically manipulated: the environment (urban, rural); the type of object changed (road sign, car, motorcycle, pedestrian, traffic light, animal, tree); and its inherent safety risk (low risk, high risk). Inherent safety risk was manipulated by either varying the object's placement, on/near or away from the road, or altering an infrastructure element that would require a change to driver behavior. Participants also completed two driving-related risk perception tasks, rating their relative crash risk and perceived risk of aberrant driving behaviors. Driver age was not significantly associated with hazard ratings, but individual differences in perceived risk of aberrant driving behaviors predicted hazard ratings, suggesting that general driving-related risk sensitivity plays a strong role in safety perception. In both urban and rural scenes, there were significant associations between hazard ratings and inherent safety risk, with low-risk changes perceived as consistently less hazardous than high

47 CFR 90.528 - Public safety broadband license.

Code of Federal Regulations, 2011 CFR

2011-10-01

... licensed if: (i) International agreements require coordination; (ii) Submission of an environmental... 47 Telecommunication 5 2011-10-01 2011-10-01 false Public safety broadband license. 90.528 Section 90.528 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO...

Ares I Integrated Vehicle System Safety Team

NASA Technical Reports Server (NTRS)

Wetherholt, Jon; McNairy, Lisa; Shackelford, Carla

2009-01-01

Complex systems require integrated analysis teams which sometimes are divided into subsystem teams. Proper division of the analysis in to subsystem teams is important. Safety analysis is one of the most difficult aspects of integration.

Use of the Home Safety Self-Assessment Tool (HSSAT) within Community Health Education to Improve Home Safety.

PubMed

Horowitz, Beverly P; Almonte, Tiffany; Vasil, Andrea

2016-10-01

This exploratory research examined the benefits of a health education program utilizing the Home Safety Self-Assessment Tool (HSSAT) to increase perceived knowledge of home safety, recognition of unsafe activities, ability to safely perform activities, and develop home safety plans of 47 older adults. Focus groups in two senior centers explored social workers' perspectives on use of the HSSAT in community practice. Results for the health education program found significant differences between reported knowledge of home safety (p = .02), ability to recognize unsafe activities (p = .01), safely perform activities (p = .04), and develop a safety plan (p = .002). Social workers identified home safety as a major concern and the HSSAT a promising assessment tool. Research has implications for reducing environmental fall risks.

Study of the Continuous Improvement Trend for Health, Safety and Environmental Indicators, after Establishment of Integrated Management System (IMS) in a Pharmaceutical Industry in Iran.

PubMed

Mariouryad, Pegah; Golbabaei, Farideh; Nasiri, Parvin; Mohammadfam, Iraj; Marioryad, Hossein

2015-10-01

Nowadays, organizations try to improve their services and consequently adopt management systems and standards which have become key parts in various industries. One of these management systems which have been noticed in the recent years is Integrated Management System that is the combination of quality, health, safety and environment management systems. This study was conducted with the aim of evaluating the improvement trend after establishment of integrated management system for health, safety and environment indicators, in a pharmaceutical industry in Iran. First, during several inspections in different parts of the industry, indicators that should have been noted were listed and then these indicators were organized in 3 domains of health, safety and environment in the form of a questionnaire that followed Likert method of scaling. Also, the weight of each index was resulted from averaging out of 30 managers and the viewpoints of the related experts in the field. Moreover, by checking the documents and evidence of different years (5 contemplation years of this study), the score of each indicator was determined by multiplying the weight and score of the indices and were finally analysed. Over 5 years, scores of health scope indicators, increased from 161.99 to 202.23. Score in the first year after applying the integrated management system establishment was 172.37 in safety part and in the final year increased to 197.57. The changes of environmental scope rates, from the beginning of the program up to the last year increased from 49.24 to 64.27. Integrated management systems help organizations to improve programs to achieve their objectives. Although in this study all trends of health, safety and environmental indicator changes were positive, but at the same time showed to be slow. So, one can suggest that the result of an annual evaluation should be applied in planning future activities for the years ahead.

Post-earthquake building safety inspection: Lessons from the Canterbury, New Zealand, earthquakes

USGS Publications Warehouse

Marshall, J.; Jaiswal, Kishor; Gould, N.; Turner, F.; Lizundia, B.; Barnes, J.

2013-01-01

The authors discuss some of the unique aspects and lessons of the New Zealand post-earthquake building safety inspection program that was implemented following the Canterbury earthquake sequence of 2010–2011. The post-event safety assessment program was one of the largest and longest programs undertaken in recent times anywhere in the world. The effort engaged hundreds of engineering professionals throughout the country, and also sought expertise from outside, to perform post-earthquake structural safety inspections of more than 100,000 buildings in the city of Christchurch and the surrounding suburbs. While the building safety inspection procedure implemented was analogous to the ATC 20 program in the United States, many modifications were proposed and implemented in order to assess the large number of buildings that were subjected to strong and variable shaking during a period of two years. This note discusses some of the key aspects of the post-earthquake building safety inspection program and summarizes important lessons that can improve future earthquake response.

An irreplaceable safety culture.

PubMed

Render, Marta L; Hirschhorn, Larry

2005-01-01

Intensive care unit (ICU) clinicians are sources of errors and of resilience. When they learn how to juggle many competing goals, remain vigilant, and tell safety stories--all in the context of changing technologies and demand--they can create safe settings of care. Other strategies (eg, using computerized tools and implementing safety procedures) are important, but alone they are not sufficient. An ICU needs a safety culture that is rooted in a committed leadership, the acknowledgment that error is inevitable, a reporting system, and continuous learning. The all too common norm, "no harm no foul," is an obstacle. ICU leaders can use a campaign strategy to spread the safety practices that sustain a safety culture. They should attend to the political, marketing, and military aspects of such campaigns and recognize that people's time and attention are limited and built projects from existing ongoing pilots. Pilots can compete for people's attention; it has pull when it exemplifies a moral idea, simplifies work, and gives the health care professional more control and feedback. Under these conditions, the campaign will release individuals' passions and add energy and insight to the campaign itself.

Safety and Environmental Regulation in Industrial Mobilization

DTIC Science & Technology

1985-01-01

shrinking industrial base and a reluctance of many firms to seek out de- fense business? When these "how" questions are answered, plans and programs...stantiated. During this phase, Department of Defense (DOD) offi- cials were interviewed for their plans for addressing the specifics of OSHA and EPA...develop and enforce their own job- safety and health programs. If a State’s plan is approved by OSHA, OSHA pays the State up to 50 percent of the

[Social network analysis: a method to improve safety in healthcare organizations].

PubMed

Marqués Sánchez, Pilar; González Pérez, Marta Eva; Agra Varela, Yolanda; Vega Núñez, Jorge; Pinto Carral, Arrate; Quiroga Sánchez, Enedina

2013-01-01

Patient safety depends on the culture of the healthcare organization involving relationships between professionals. This article proposes that the study of these relations should be conducted from a network perspective and using a methodology called Social Network Analysis (SNA). This methodology includes a set of mathematical constructs grounded in Graph Theory. With the SNA we can know aspects of the individual's position in the network (centrality) or cohesion among team members. Thus, the SNA allows to know aspects related to security such as the kind of links that can increase commitment among professionals, how to build those links, which nodes have more prestige in the team in generating confidence or collaborative network, which professionals serve as intermediaries between the subgroups of a team to transmit information or smooth conflicts, etc. Useful aspects in stablishing a safety culture. The SNA would analyze the relations among professionals, their level of communication to communicate errors and spontaneously seek help and coordination between departments to participate in projects that enhance safety. Thus, they related through a network, using the same language, a fact that helps to build a culture. In summary, we propose an approach to safety culture from a SNA perspective that would complement other commonly used methods.

Environmental Management System Objectives & Targets Results Summary - FY 2015.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vetter, Douglas W.

2016-02-01

Sandia National Laboratories (SNL) Environmental Management System is the integrated approach for members of the workforce to identify and manage environmental risks. Each Fiscal Year (FY) SNL performs an analysis to identify environmental aspects, and the environmental programs associated with them are charged with the task of routinely monitoring and measuring the objectives and targets that are established to mitigate potential impacts of SNL's operations on the environment. An annual summary of the results achieved towards meeting established Sandia Corporation and SNL Site-specific objectives and targets provides a connection to, and rational for, annually revised environmental aspects. The purpose ofmore » this document is to summarize the results achieved and documented in FY 2015.« less

System theory and safety models in Swedish, UK, Dutch and Australian road safety strategies.

PubMed

Hughes, B P; Anund, A; Falkmer, T

2015-01-01

Road safety strategies represent interventions on a complex social technical system level. An understanding of a theoretical basis and description is required for strategies to be structured and developed. Road safety strategies are described as systems, but have not been related to the theory, principles and basis by which systems have been developed and analysed. Recently, road safety strategies, which have been employed for many years in different countries, have moved to a 'vision zero', or 'safe system' style. The aim of this study was to analyse the successful Swedish, United Kingdom and Dutch road safety strategies against the older, and newer, Australian road safety strategies, with respect to their foundations in system theory and safety models. Analysis of the strategies against these foundations could indicate potential improvements. The content of four modern cases of road safety strategy was compared against each other, reviewed against scientific systems theory and reviewed against types of safety model. The strategies contained substantial similarities, but were different in terms of fundamental constructs and principles, with limited theoretical basis. The results indicate that the modern strategies do not include essential aspects of systems theory that describe relationships and interdependencies between key components. The description of these strategies as systems is therefore not well founded and deserves further development. Copyright © 2014 Elsevier Ltd. All rights reserved.

In-space propellant logistics and safety

NASA Technical Reports Server (NTRS)

1971-01-01

Preliminary guidelines for the basic delivery system and safety aspects of the space shuttle configuration in connection with the transport, handling, storage, and transfer of propellants are developed. It is shown that propellants are the major shuttle space load and influence shuttle traffic modeling significantly.

Health And Safety In Maintenance Activities

NASA Astrophysics Data System (ADS)

Ungureanu, Nicolae Stelian; Daraba, Dinu; Moraru, Roland Iosif

2015-07-01

The paper examines some aspects of health and safety at work in maintenance activities. It was analysed the occurrence of accidents, statistically, in maintenance work. There have been identified a number of causes of accidents and there have been proposed some measures to reduce them.

Assessing the Environmental Safety of Engineered Nanomaterials

EPA Science Inventory

Nanotechnology research in the United States is coordinated under the National Nano-technology Initiative with the goal of fostering development and implementation of nanomaterials and products that incorporate them and assuring that they are environmentally safe. The environmen...

Safety assessment in the urban park environment in Alborz Province, Iran.

PubMed

Oostakhan, Morteza; Babaei, Aliakbar

2013-01-01

Urban parks, as one of the recreational and sports sectors, could cause serious injuries among different ages if the safety issues in their design are not considered. These injuries can result from the equipment in the park, including play and sports equipment, or even from environmental factors, too. Lack of safety benchmark in parks will impact on the development of future proposals. In this article, attempts are made to survey the important safety factors in the urban parks including playgrounds, fitness equipment, pedestrian surface and environmental factors into a risk assessment. Hence, a checklist of safety factors was used. A Yes or No descriptor was allocated to any factor for determining safety level. The study also suggests recommendations for future planning concerning existing failures for designers. It was found that the safety level of the regional and local parks differ from each other.

Nutritional composition and safety aspects of edible insects.

PubMed

Rumpold, Birgit A; Schlüter, Oliver K

2013-05-01

Insects, a traditional food in many parts of the world, are highly nutritious and especially rich in proteins and thus represent a potential food and protein source. A compilation of 236 nutrient compositions in addition to amino acid spectra and fatty acid compositions as well as mineral and vitamin contents of various edible insects as derived from literature is given and the risks and benefits of entomophagy are discussed. Although the data were subject to a large variation, it could be concluded that many edible insects provide satisfactorily with energy and protein, meet amino acid requirements for humans, are high in MUFA and/or PUFA, and rich in several micronutrients such as copper, iron, magnesium, manganese, phosphorous, selenium, and zinc as well as riboflavin, pantothenic acid, biotin, and in some cases folic acid. Liabilities of entomophagy include the possible content of allergenic and toxic substances as well as antinutrients and the presence of pathogens. More data are required for a thorough assessment of the nutritional potential of edible insects and proper processing and decontamination methods have to be developed to ensure food safety. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Safety in GPR prospecting: a rarely-considered issue

NASA Astrophysics Data System (ADS)

Persico, Raffaele; Pajewski, Lara; Trela, Christiane; Carrick Utsi, Erica

2016-04-01

Safety issues (of people first of all, but also of the equipment and environment) are rarely considered in Ground-Penetrating Radar (GPR) prospecting and, more in general, in near-surface geophysical prospecting. As is right and fully understandable, the scientific community devotes greatest attention first of all to the theoretical and practical aspects of GPR technique, affecting the quality of attainable results, secondly to the efforts and costs needed to achieve them [1-2]. However, the (luckily) growing GPR market and range of applications make it worth giving serious consideration to safety issues, too. The existing manuals dealing with safety in geophysics are mainly concerned with applications requiring "deep" geophysical prospecting, for example the search for oilfields and other hydrocarbon resources [3]. Near-surface geophysics involves less dangers than deep geophysics, of course. Nevertheless, several accidents have already happened during GPR experimental campaigns. We have personally had critical experiences and collected reliable testimonies concerning occurred problems as mountain sicks, fractures of legs, stomach problems, allergic reactions, encounters with potentially-dangerous animals, and more. We have also noticed that much more attention is usually paid to safety issues during indoor experimental activities (in laboratory), rather than during outdoor fieldworks. For example, the Italian National research Council is conventioned with safety experts who hold periodical seminaries about safety aspects. Having taken part to some of them, to our experience we have never heard a "lecture" devoted to outdoor prospecting. Nowadays, any aspects associated to the use of the technologies should be considered. The increasing sensibility and sense of responsibility towards environmental matters impose GPR end-users to be careful not to damage the environment and also the cultural heritage. Near-surface prospecting should not compromise the flora and

22 CFR 216.7 - Environmental impact statements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Environmental impact statements. 216.7 Section... Environmental impact statements. (a) Applicability. An Environmental Impact Statement shall be prepared when... nation (e.g., the oceans); (2) The environment of the United States; or (3) Other aspects of the...

22 CFR 216.7 - Environmental impact statements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Environmental impact statements. 216.7 Section... Environmental impact statements. (a) Applicability. An Environmental Impact Statement shall be prepared when... nation (e.g., the oceans); (2) The environment of the United States; or (3) Other aspects of the...

22 CFR 216.7 - Environmental impact statements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Environmental impact statements. 216.7 Section... Environmental impact statements. (a) Applicability. An Environmental Impact Statement shall be prepared when... nation (e.g., the oceans); (2) The environment of the United States; or (3) Other aspects of the...

Environmental Assessment for Construction of Radial Arm Spill Gates MacDill Air Force Base, Florida

DTIC Science & Technology

2012-05-01

requires that Federal agencies identify and assess environmental health and safety risks that might disproportionately affect children. The Proposed...Action would not pose any adverse or disproportionate environmental health or safety risks to children living near the base. Safety precautions...Department of Envir. Protection 3900 Commonwealth Blvd, Mail Station 47 Tallahassee, FL 32399-3000 RE: Draft Environmental Assessment and Draft

An examination of the comfort and convenience of 1979 safety belt systems

DOT National Transportation Integrated Search

1979-01-01

The study examines the comfort and convenience aspects of safety belt systems in 1979 model cars and the user and system characteristics which affect safety belt comfort and convenience. The test design required that each of 114 test participants sit...

Urban construction and safety project

NASA Technical Reports Server (NTRS)

Hogarth, P. T.

1976-01-01

Technology utilization projects in the area of urban construction and safety included the following: development of undercarpet and baseboard flat conductor cables, flood insurance studies, tornado safety engineering, the Project TECH house at the Langley Research Center, assistance to the City of Atlanta in their environmental habitability and resource allocation program, and market assessment of a solid state diesel engine controller. The flat conductor cable and the flood insurance studies are given particular attention.

A Technology Solution Strengthens Comprehensive Environmental Management

DTIC Science & Technology

2012-05-23

General Navigation  Chemical Approval Example  NEPA Coordination Example  Safety PPE Example  Summary Marine Corps Support Facility...coordination, completion and documentation through automated workflows of various business processes  Chemical Approval  NEPA Coordination  Safety ...Completion Diagram Government Employee/M CMC MCMC Chemical Manager MCMC HS&E Specialist IMO Chemical Safety Specialist IMO Chemical Environmental

Non-reporting of work injuries and aspects of jobsite safety climate and behavioral-based safety elements among carpenters in Washington State.

PubMed

Lipscomb, Hester J; Schoenfisch, Ashley L; Cameron, Wilfrid

2015-04-01

Declining work injury rates may reflect safer work conditions as well as under-reporting. Union carpenters were invited to participate in a mailed, cross-sectional survey designed to capture information about injury reporting practices. Prevalence of non-reporting and fear of repercussions for reporting were compared across exposure to behavioral-based safety elements and three domains of the Nordic Safety Climate Questionnaire (NOSACQ-50). The majority (>75%) of the 1,155 participants felt they could report work-related injuries to their supervisor without fear of retribution, and most felt that the majority of injuries on their jobsites got reported. However, nearly half indicated it was best not to report minor injuries, and felt pressures to use their private insurance for work injury care. The prevalence of non-reporting and fear of reporting increased markedly with poorer measures of management safety justice (NOSACQ-50). Formal and informal policies and practices on jobsites likely influence injury reporting. © 2015 Wiley Periodicals, Inc.

Designing for human presence in space: An introduction to environmental control and life support systems

NASA Technical Reports Server (NTRS)

Wieland, Paul

1994-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The functions that are performed by ECLSS are described and basic information necessary to design an ECLSS is provided. Technical and programmatic aspects of designing and developing ECLSS for space habitats are described including descriptions of technologies, analysis methods, test requirements, program organization, documentation requirements, and the requirements imposed by medical, mission, safety, and system needs. The design and development process is described from initial trade studies through system-level analyses to support operation. ECLSS needs for future space habitats are also described. Extensive listings of references and related works provide sources for more detailed information on each aspect of ECLSS design and development.

Towards patient safety in anaesthesia.

PubMed

Cooper, J B

1994-07-01

The anaesthesia specialty has focused on the safety of the patient and examination of untoward outcomes. Serious injuries are now rare in medically advanced countries. Still, anaesthesia deaths and complications are important because the anaesthetic itself has no intended therapeutic effect. Safety is a never-ending battle that requires continued effort because many forces have the potential to diminish whatever progress is made. This paper describes the modern movement in anaesthesia patient safety--the reasons it started, the major foci and explanations for why anaesthesia seems now to be safer than at any time in history. The American legal system, critical incident studies, studies of malpractice claims and large-scale studies of anaesthesia outcomes played a role in increasing the awareness of the need to enhance anaesthesia safety. Many efforts are believed to have contributed to improvements in the safety of anaesthesia: improved training of anaesthesia clinicians, new pharmaceuticals, new technologies for monitoring (especially pulse oximetry and capnography), standards for monitoring and other aspects of anaesthesia care, safety enhancements in anaesthesia equipment and the implementation of quality assurance and risk management programmes. The creation of the Anesthesia Patient Safety Foundation in the United States and a similar organization in Australia have helped to bring about awareness of safety issues and to support study of patient safety. Ultimately, the motto of the Anesthesia Patient Safety Foundation should be the goal of all anaesthesia professionals: "That no patient shall be harmed by anaesthesia".

The Role of ESA TEC-QTE in the ISS Safety Process

NASA Astrophysics Data System (ADS)

Orlandi, M.; Rohr, T.; Stienstra, M. H.; Semprimoschnig, C.

2013-09-01

On the 17th of July 2000, the Materials and Processes Reciprocal Agreement was signed between NASA and ESA to define the process for selection and certification of materials used in the Space Shuttle and the International Space Station. Consecutively, on the 20th of June 2003 this agreement was extended to the Automated Transport Vehicle (ATV). It is therefore the responsibility of ESA TEC-QTE, the Materials Space Evaluation and Radiation Effects section, part of the Product Assurance and Safety Department, to ensure that all materials, parts and processes of each of the ISS payloads not only function as required but also do not pose a risk to the safety of the crew members. In this context, TEC-QTE provides qualified expertise to support the ESA Flight Safety Review and assesses safety aspects related to manned projects (materials properties, fluid system compatibility, fungus resistance). This is supported by the Materials Space Evaluation and Radiation Effects section's Materials and Electrical Components laboratory having at its disposition a range of facilities designed to perform environmental effects testing of which off-gassing tests according to ECSS-Q-ST-70-29C (equivalent to NASA STD 6001 test 7) and outgassing tests according to ECSS-Q-ST-70-02C (equivalent to ASTM-E-595). The ESA facility to perform flammability tests according to ECSS-Q-ST-70-21A (equivalent to NASA STD 6001 test1) was moved to Astrium Bremen.TEC-QTE is in charge of reviewing and approving, via RFA or MUA , all materials that do not meet safety requirements as well as COTS or CAM (black boxes) equipment.The safety process ends with the issue of the Materials Certification of the reviewed payload hardware that shows compliance with the relevant materials and processes requirements and standards.In addition to the safety related activities for the ISS, specialised TEC-QTE personnel provide measurements of the air quality inside the ATV and assess whether the toxicity index is within

Hydropower and Environmental Resource Assessment (HERA): a computational tool for the assessment of the hydropower potential of watersheds considering engineering and socio-environmental aspects.

NASA Astrophysics Data System (ADS)

Martins, T. M.; Kelman, R.; Metello, M.; Ciarlini, A.; Granville, A. C.; Hespanhol, P.; Castro, T. L.; Gottin, V. M.; Pereira, M. V. F.

2015-12-01

The hydroelectric potential of a river is proportional to its head and water flows. Selecting the best development alternative for Greenfield projects watersheds is a difficult task, since it must balance demands for infrastructure, especially in the developing world where a large potential remains unexplored, with environmental conservation. Discussions usually diverge into antagonistic views, as in recent projects in the Amazon forest, for example. This motivates the construction of a computational tool that will support a more qualified debate regarding development/conservation options. HERA provides the optimal head division partition of a river considering technical, economic and environmental aspects. HERA has three main components: (i) pre-processing GIS of topographic and hydrologic data; (ii) automatic engineering and equipment design and budget estimation for candidate projects; (iii) translation of division-partition problem into a mathematical programming model. By integrating an automatic calculation with geoprocessing tools, cloud computation and optimization techniques, HERA makes it possible countless head partition division alternatives to be intrinsically compared - a great advantage with respect to traditional field surveys followed by engineering design methods. Based on optimization techniques, HERA determines which hydro plants should be built, including location, design, technical data (e.g. water head, reservoir area and volume, engineering design (dam, spillways, etc.) and costs). The results can be visualized in the HERA interface, exported to GIS software, Google Earth or CAD systems. HERA has a global scope of application since the main input data area a Digital Terrain Model and water inflows at gauging stations. The objective is to contribute to an increased rationality of decisions by presenting to the stakeholders a clear and quantitative view of the alternatives, their opportunities and threats.

Where Are We Heading in Nanotechnology Environmental Health and Safety and Materials Characterization?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nel, Andre; Parak, Wolfgang J.; Chan, Warren C.

2015-06-23

Every chemist, material scientist, physicist, engineer, or commercial enterprise involved in the synthesis and/or production of engineered nanomaterials (ENM) or nano-enabled products aspires to develop safe materials. Nanotechnology environmental health and safety (nanoEHS) is a research discipline that involves the study of the possible adverse health and biological effects that nanomaterials may have on humans and environmental organisms and ecosystems. NanoEHS research has provided a body of experimental evidence indicating the possibility of hazardous outcomes as a result of the interactions of unique ENM physicochemical properties with similar scale processes occurring at a wide range of nano/bio interfaces, including atmore » biomolecular, cellular, subcellular, organ, systemic, whole organism, or ecosystems levels. This projected hazard and risk potential warrants rigorous attention to safety assessment, safe use, safe implementation, benign design, regulatory oversight, governance, and public awareness to address the possibility and prevention of nanotoxicity, now or at any time in the future.1 Thus, we should understand the properties of the ENMs that are responsible for the toxicological response, so that we can re-engineer their physicochemical characteristics for risk prevention and safer ENM design.2 However, in spite of widespread use, no human toxicological disease or major environmental impact has been reported for ENMs. Thus, while “Nanotoxicology” is a thriving sub-discipline of Nano-EHS, the use of the “root” word toxicology may elicit a feeling that nanomaterials are inherently toxic despite the fact that toxicity has not been established in real-life use so far. As a community, we may want to rename this sub-discipline as “Nanosafety,” since the objective is to use toxicology information to guide the design of safer nanomaterials for use in medicine, biology, electronics, lighting systems, etc. At ACS Nano, we are interested in

Health and Safety Law over the Last 50 Years

ERIC Educational Resources Information Center

Whitcher, Ralph

2013-01-01

From a time when laws on health and safety applied only to some industries and much was unregulated, we have moved to a time when health and safety laws seem, if you believe some reports in the news, to pervade every aspect of working life with silly restrictions. This article looks at the development of the legislation from the 1960s and suggests…

Fall Prevention Research and Practice: A Total Worker Safety Approach

PubMed Central

HSIAO, Hongwei

2014-01-01

Slips, trips, and falls (STF) represent a serious hazard to workers and occupants in many industries, homes, and communities. Often, the cause of a STF incident is multifactorial, encompassing human, environmental, and task risk factors. A STF-related disability can greatly diminish the occupational capability and quality of life of individuals in both the workplace and the home. Countering STF hazards and risks both on and off the job and on all aspects of control measures is a “total worker safety” matter, a challenging yet tangible undertaking. As the federal organization responsible for conducting research for the prevention of work-related injuries in the United States, the National Institute for Occupational Safety and Health (NIOSH) has been conducting research on STF controls for some decades. Many NIOSH research outcomes have been utilized for STF prevention in workplaces, with potential for prevention in homes as well. This paper summarizes the concept of total worker safety for STF control, NIOSH priority research goals, major activities, and accomplishments, and some emerging issues on STF. The strategic planning process for the NIOSH research goals and some identified research focuses are applicable to the development and implementation of global STF research goals. PMID:25345424

Biomedical waste management: incineration vs. environmental safety.

PubMed

Gautam, V; Thapar, R; Sharma, M

2010-01-01

Public concerns about incinerator emissions, as well as the creation of federal regulations for medical waste incinerators, are causing many health care facilities to rethink their choices in medical waste treatment. As stated by Health Care Without Harm, non-incineration treatment technologies are a growing and developing field. Most medical waste is incinerated, a practice that is short-lived because of environmental considerations. The burning of solid and regulated medical waste generated by health care creates many problems. Medical waste incinerators emit toxic air pollutants and toxic ash residues that are the major source of dioxins in the environment. International Agency for Research on Cancer, an arm of WHO, acknowledged dioxins cancer causing potential and classified it as human carcinogen. Development of waste management policies, careful waste segregation and training programs, as well as attention to materials purchased, are essential in minimizing the environmental and health impacts of any technology.

Criterion for Estimation of Ecological Safety of Objects of Urban Transport Construction

NASA Astrophysics Data System (ADS)

Bakaeva, N. V.; Chernyaeva, I. V.

2017-11-01

A new approach to assess the ecological safety of the urban environment including urban transport facilities is being considered. The chemical and acoustic pollution of the environment from the impact of the urban transport construction objects is analyzed. The description of the sustainable state concept and ecological balance of the urban environment is given. A criterion for assessing environmental safety based on a comprehensive indicator of the city’s biosphere compatibility was proposed. The scale of environmental safety assessments is constructed.

A review of health and safety leadership and managerial practices on modern dairy farms.

PubMed

Hagevoort, G Robert; Douphrate, David I; Reynolds, Stephen J

2013-01-01

As modern dairy operations around the world expand, farmers are increasingly reliant on greater automation and larger numbers of hired labor to milk cows and perform other essential farm tasks. Dairy farming is among the most dangerous occupations, with high rates of injury, illness, and employee turnover. Lower education levels, illiteracy, and limited language proficiency increase the possibility of injury or death associated with higher risk occupations such as dairy. Sustaining a healthy, productive workforce is a critical component of risk management; however, many owners and managers have not received formal training in employee management or occupational health and safety. Optimal dairy farming management should address milk production that is sustainable and responsible from the animal welfare, social, economic, and environmental perspectives. Each of these aspects is interdependent with each other and with a sustainable, healthy, productive workforce. Very few studies address the effectiveness of risk management in the dairy industry. Studies suggest that labor management practices are a potential competitive advantage for dairy farms, but the connection with efficiency, productivity, and profitability has not been clearly demonstrated. Transformational leadership has been associated with improved safety climate and reduced incidence of injury, whereas passive leadership styles have opposite effects. There is a need to develop and evaluate the effectiveness of safety-specific transformational leadership among dairy owners and managers. A systematic approach to risk management should address worker health and safety as an integral component of production, food safety, and animal welfare. A successful program must address the cultural and linguistic barriers associated with immigrant workers.

Principles and Practices of Occupational Safety and Health: Administrator's Manual.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

The manual guides an instructor in conducting a training course for first-line supervisors to familiarize them with six aspects relating to the Occupational Safety and Health Act of 1970: (1) requirements of the Act, (2) compliance with its standards, (3) identification of health and safety hazards, (4) correction of adverse conditions, (5) record…

[Medical and environmental aspects of the drinking water supply crisis].

PubMed

Él'piner, L I

2013-01-01

Modern data determining drinking water supply crisis in Russia have been considered. The probability of influence of drinking water quality used by population on current negative demographic indices was shown. The necessity of taking into account interests of public health care in the process of formation of water management decisions was grounded. To achieve this goal the application of medical ecological interdisciplinary approach was proposed Its use is mostly effective in construction of goal-directed medical ecological sections for territorial schemes of the rational use and protection of water resources. Stages of the elaboration of these sections, providing the basing of evaluation and prognostic medical and environmental constructions on similar engineering studies of related disciplinary areas (hydrological, hydrogeological, hydrobiological, hydrochemical, environmental, socio-economic, technical and technological) were determined.

77 FR 35852 - Safety Zones; Multiple Firework Displays in Captain of the Port, Puget Sound Zone

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

... 13045, Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an environmental risk to health or risk to safety that may... 1625-AA00 Safety Zones; Multiple Firework Displays in Captain of the Port, Puget Sound Zone AGENCY...

Determination of technetium-99 in environmental samples: a review.

PubMed

Shi, Keliang; Hou, Xiaolin; Roos, Per; Wu, Wangsuo

2012-01-04

Due to the lack of a stable technetium isotope, and the high mobility and long half-life, (99)Tc is considered to be one of the most important radionuclides in safety assessment of environmental radioactivity as well as nuclear waste management. (99)Tc is also an important tracer for oceanographic research due to the high technetium solubility in seawater as TcO(4)(-). A number of analytical methods, using chemical separation combined with radiometric and mass spectrometric measurement techniques, have been developed over the past decades for determination of (99)Tc in different environmental samples. This article summarizes and compares recently reported chemical separation procedures and measurement methods for determination of (99)Tc. Due to the extremely low concentration of (99)Tc in environmental samples, the sample preparation, pre-concentration, chemical separation and purification for removal of the interferences for detection of (99)Tc are the most important issues governing the accurate determination of (99)Tc. These aspects are discussed in detail in this article. Meanwhile, the different measurement techniques for (99)Tc are also compared with respect to advantages and drawbacks. Novel automated analytical methods for rapid determination of (99)Tc using solid extraction or ion exchange chromatography for separation of (99)Tc, employing flow injection or sequential injection approaches are also discussed. Copyright © 2011 Elsevier B.V. All rights reserved.

Environmental Assessment for Construction of Visiting Quarters - Phases One and Two, MacDill AFB, Florida

DTIC Science & Technology

2011-07-13

kilometers of a Class I area ; therefore, the PSD regulations do not apply. Affected Environment Environmental Assessment for Construction of...Federal agencies, to the extent permitted by law and mission, to identify and assess environmental health and safety risks that might...disproportionate risks . The order defines environmental health and safety risks as “ risks to health or to safety that are attributable to products or

Mine safety: Occupational health -- general studies. (Latest citations from the NTIS bibliographic database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The bibliography contains citations concerning occupational hazards in the metals and fossil fuel mining environment. Topics include the detection, control and effects of respirable dust, safety aspects of various mining methods, gas detection, and field surveys of specific operations. Some attention is given to legislative aspects of mine safety and benefits to the disabled.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

A comparison of the environmental impact of different AOPs: risk indexes.

PubMed

Giménez, Jaime; Bayarri, Bernardí; González, Óscar; Malato, Sixto; Peral, José; Esplugas, Santiago

2014-12-31

Today, environmental impact associated with pollution treatment is a matter of great concern. A method is proposed for evaluating environmental risk associated with Advanced Oxidation Processes (AOPs) applied to wastewater treatment. The method is based on the type of pollution (wastewater, solids, air or soil) and on materials and energy consumption. An Environmental Risk Index (E), constructed from numerical criteria provided, is presented for environmental comparison of processes and/or operations. The Operation Environmental Risk Index (EOi) for each of the unit operations involved in the process and the Aspects Environmental Risk Index (EAj) for process conditions were also estimated. Relative indexes were calculated to evaluate the risk of each operation (E/NOP) or aspect (E/NAS) involved in the process, and the percentage of the maximum achievable for each operation and aspect was found. A practical application of the method is presented for two AOPs: photo-Fenton and heterogeneous photocatalysis with suspended TiO2 in Solarbox. The results report the environmental risks associated with each process, so that AOPs tested and the operations involved with them can be compared.

Specific environmental release categories--A tool for improving chemical safety assessment in the EC--report of a multi-stakeholder workshop.

PubMed

Sättler, Daniel; Schnöder, Frank; Aust, Nannett; Ahrens, Andreas; Bögi, Christian; Traas, Theo; Tolls, Johannes

2012-10-01

In April 2011, experts from industry and authorities met for a workshop to discuss experience and future developments regarding the use of specific environmental release categories (SPERCs) in chemicals safety assessment (CSA) under the European Chemicals Regulation Registration, Evaluation and Authorization of Chemicals (REACH). This article provides a summary of the workshop. It briefly explains what a SPERC is, why SPERCs are needed, where the challenges of the concept are, and what improvements are needed to make SPERCs a useful tool for assessments under REACH. Copyright © 2012 SETAC.

Federal inventory of energy-related biomedical and environmental research for FY 1974 and FY 1975. [TVA, NASA, National Institutes of Health, National Institute for Occupational Safety and Health

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1975-10-01

Brief summaries are presented of energy-related biomedical and environmental research studies during 1974 and 1975 sponsored by the Tennessee Valley Authority, National Aeronautics and Space Administration, National Institutes of Health, and the National Institute for Occupational Safety and Health. (CH)

Southern Great Plains Safety Orientation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schatz, John

2014-05-01

Welcome to the Atmospheric Radiation Measurement (ARM) Climate Research Facility (ARM) Southern Great Plains (SGP) site. This U.S. Department of Energy (DOE) site is managed by Argonne National Laboratory (ANL). It is very important that all visitors comply with all DOE and ANL safety requirements, as well as those of the Occupational Safety and Health Administration (OSHA), the National Fire Protection Association, and the U.S. Environmental Protection Agency, and with other requirements as applicable.

Environmental Change & Fragile States Early Warning and Intervention

DTIC Science & Technology

2011-05-12

data needed , and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this...power to effectively meet the most challenging international objectives 7 Addressing Basic Human Needs Self- Actualization Ego (Esteem) Social...Belonging) Safety/Security Physiological Physical survival needs : water, food, shelter, warmth, sleep, etc. Physical safety, economic security, freedom

Environmental Assessment for Airborne Laser Debris Management Vandenberg AFB, California

DTIC Science & Technology

2008-07-01

use, aesthetics, hazardous materials management, soils and geology, noise, cultural resources, and environmental justice. The resources analyzed in...more detail include: health and safety, hazardous waste management, water resources, air quality, and biological resources. Environmental Effects Under...either intact or destroyed target missiles could result in several potential hazards . Health and Safety. Based on the debris migration modeling and

Environmental Education through Hiking: A Qualitative Investigation.

ERIC Educational Resources Information Center

Ferreira, Gherda

1998-01-01

Ascertains what people notice in the environment during hikes and whether this could influence environmental education. Identifies four themes: (1) the natural and physical environment; (2) trail aspects; (3) each hiker's physical and psychological preparedness and cognitive development; and (4) social aspects. (DDR)

Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

PubMed

Törner, Marianne; Pousette, Anders

2009-01-01

The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

Waste Isolation Pilot Plant Site Environmental Report for 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hooda, Balwan S.; Allen, Vivian L.

This 1998 annual Site Environmental Report (SER) was prepared in accordance with U.S. Department of Energy (DOE) Order 5400.1, ''General Environmental Protection Program''; DOE Order 231.1, ''Environmental Safety and Health Reporting''; the ''Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance'' (DOE/EH-0173T); and the Environmental Protection Implementation Plan (DOE/WIPP 96-2199). The above orders and guidance documents require that DOE facilities submit an SER to DOE Headquarters, Office of the Assistant Secretary for Environment, Safety, and Health. The purpose of the SER is to provide a comprehensive description of operational environmental monitoring activities, an abstract of environmental activities conducted tomore » characterize site environmental management performance, to confirm compliance with environmental standards and requirements, and to highlight significant programs and efforts of environmental merit at WIPP during calendar year ( CY) 1998. The content of this SER is not restricted to a synopsis of the required data. Information pertaining to new and continued monitoring and compliance activities during CY 1998 are also included.« less

Safety halls--an evaluation.

PubMed

Nyberg, Anders; Gregersen, Nils Petter; Nolén, Sixten; Engström, Inger

2005-01-01

In most countries, drivers licensing systems usually include teaching some aspects of using safety equipment (e.g., airbags and seat belts). However, there is now evidence worldwide that such education is inadequate, as indicated by, for example, the overrepresentation of young drivers who do not use seat belts. A randomized controlled study was conducted in Sweden to evaluate the effects of visiting a facility known as a "safety hall" in combination with the mandatory skid training. The results were assessed to determine the effects of the knowledge and attitudes of learner drivers in the following subjects: airbags, securing loads, seat belts, sitting posture, speed, and tires. An experimental group and a control group comprising 658 and 668 learners, respectively, answered identical questionnaires on three different occasions (pretest, posttest 1, and posttest 2). The results show that, for most of the topics considered, knowledge and attitudes in both groups were better at posttest 2 than at the pretest, and in general, the best knowledge and attitudes were found in the experimental group. The combined safety/skid training seems to have had the greatest effect on seat belts and loads. The findings also indicate that the safety halls can be further improved to achieve an even better effect. The use of safety halls has improved the knowledge and attitudes of learner drivers concerning several important areas related to traffic safety. Since knowledge and attitudes are important predictors of behavior, implementing safety halls can be expected to lead to improvements, especially regarding the use of safety belts and securing loads.

Registered nurses' perceptions of conditions for patient education - focusing on organisational, environmental and professional cooperation aspects.

PubMed

Bergh, Anne-Louise; Karlsson, Jan; Persson, Eva; Friberg, Febe

2012-09-01

To describe nurses' perceptions of conditions for patient education, focusing on organisational, environmental and professional cooperation aspects, and to determine any differences between primary, municipal and hospital care. Although patient education is an important part of daily nursing practice, the conditions for this work are unclear and require clarification. A stratified random sample of 701 (83%) nurses working in primary, municipal and hospital care completed a 60-item questionnaire. The study is part of a larger project. The study items relating to organisation, environment and professional cooperation were analysed using descriptive statistics, non-parametric tests and content analysis. Conditions for patient education differ. Nurses in primary care had better conditions and more managerial support, for example in the allocation of undisturbed time. Conditions related to organisation, environment and cooperation need to be developed further. In this process, managerial support is important, and nurses must ask for better conditions in order to carry through patient education. Managerial support for the development of visible patient education routines (e.g. allocation of time, place and guidelines) is required. One recommendation is to designate a person to oversee educational work. © 2012 Blackwell Publishing Ltd.

Human behavior aspects of fish and wildlife conservation: an annotated bibliography.

Treesearch

Dale R. Potter; Kathryn M. Sharpe; John C. Hendee

1973-01-01

The bibliography covers nonbiological or human behavior aspects of fish and wildlife conservation including sportsman characteristics, safety, law enforcement, professional and sportsman education, nonconsumptive uses, economics, and history. There are 995 references from 218 different sources. Also included are a list of reference sources used, an author index, and...

Environmental aspects of engineering geological mapping in the United States

USGS Publications Warehouse

Radbruch-Hall, Dorothy H.

1979-01-01

Many engineering geological maps at different scales have been prepared for various engineering and environmental purposes in regions of diverse geological conditions in the United States. They include maps of individual geological hazards and maps showing the effect of land development on the environment. An approach to assessing the environmental impact of land development that is used increasingly in the United States is the study of a single area by scientists from several disciplines, including geology. A study of this type has been made for the National Petroleum Reserve in northern Alaska. In the San Francisco Bay area, a technique has been worked out for evaluating the cost of different types of construction and land development in terms of the cost of a number of kinds of earth science factors. ?? 1979 International Association of Engineering Geology.

Safety of vulnerable road users

DOT National Transportation Integrated Search

1998-08-07

This report presents a review of the current safety situation of vulnerable road users in OECD Member countries. Industrialized societies are aware of the environmental problems generated by motorized traffic in cities and encourage the development o...

Obesogenic environments: environmental approaches to obesity prevention.

PubMed

Lipek, Tobias; Igel, Ulrike; Gausche, Ruth; Kiess, Wieland; Grande, Gesine

2015-05-01

Childhood obesity is a major concern for public health. There are multiple factors (e.g., genetic, social, and environmental) that contribute to unhealthy weight gain. Drawing from findings on "obesogenic environments" and core principles of preventive strategies to reduce health inequalities, this paper gives an overview of recent childhood prevention programs that target aspects of the physical environment ("environmental changes"). Out of the ten reviews we screened (including more than 300 studies), we identified very few that addressed aspects of the environment. We focus here on 14 programs that follow different approaches to environmental changes (e.g., access to/quality of playgrounds, changes in school cafeterias). Altering the environment offers opportunities for healthier behaviors and seems to be an effective strategy to prevent childhood obesity. However, the evaluation of those (mostly) multidimensional interventions does not allow drawing firm conclusions about the single effect of environmental changes. We conclude that obesity prevention programs should combine person-based and environmental approaches.

Defense Occupational and Environmental Health Readiness System (DOEHRS) Guidance

DTIC Science & Technology

2009-07-01

TERMS Defense Occupational and Environmental Health Reporting System (DOEHRS), Industrial Hygiene, Environmental Health, Information Management System Hygiene...Information System (AF EMIS), the Air Force Enterprise Environmental, Safety, and Occupational Health Information Management System (EESOH MIS), or the

Safety and Health in Multinational Enterprises: What Have We Learnt?

ERIC Educational Resources Information Center

Romero, Ana Teresa

1993-01-01

Analyzes the practices of multinationals in the sphere of occupational safety and health and poses the question of safety and health and industrial risks in terms of environmental problems. Indicates that the future of safety and health may hinge on the adaptation and implementation of recommendations of International Labour Organisation members.…

Mesenchymal Stem Cells as Therapeutics Agents: Quality and Environmental Regulatory Aspects

PubMed Central

Sabata, Roger; Verges, Josep; Zugaza, José L.; Ruiz, Adolfina; Clares, Beatriz

2016-01-01

Mesenchymal stem cells (MSCs) are one of the main stem cells that have been used for advanced therapies and regenerative medicine. To carry out the translational clinical application of MSCs, their manufacturing and administration in human must be controlled; therefore they should be considered as medicine: stem cell-based medicinal products (SCMPs). The development of MSCs as SCMPs represents complicated therapeutics due to their extreme complex nature and rigorous regulatory oversights. The manufacturing process of MSCs needs to be addressed in clean environments in compliance with requirements of Good Manufacturing Practice (GMP). Facilities should maintain these GMP conditions according to international and national medicinal regulatory frameworks that introduce a number of specifications in order to produce MSCs as safe SCMPs. One of these important and complex requirements is the environmental monitoring. Although a number of environmental requirements are clearly defined, some others are provided as recommendations. In this review we aim to outline the current issues with regard to international guidelines which impact environmental monitoring in cleanrooms and clean areas for the manufacturing of MSCs. PMID:27999600

Optimizing Health Care Environmental Hygiene.

PubMed

Carling, Philip C

2016-09-01

This article presents a review and perspectives on aspects of optimizing health care environmental hygiene. The topics covered include the epidemiology of environmental surface contamination, a discussion of cleaning health care patient area surfaces, an overview of disinfecting health care surfaces, an overview of challenges in monitoring cleaning versus cleanliness, a description of an integrated approach to environmental hygiene and hand hygiene as interrelated disciplines, and an overview of the research opportunities and challenges related to health care environmental hygiene. Copyright © 2016 Elsevier Inc. All rights reserved.

Safety of Nanotechnology in Food Industries

PubMed Central

Amini, Seyed Mohammad; Gilaki, Marzieh; Karchani, Mohsen

2014-01-01

The arrival of nanotechnology in various industries has been so rapid and widespread because of its wide-ranging applications in our daily lives. Nutrition and food service is one of the biggest industries to be affected by nanotechnology in all areas, changing even the nature of food itself. Whether it’s farming, food packaging, or the prevention of microbial contamination the major food industries have seen dramatic changes because of nanotechnology. Different nanomaterials such as nanopowders, nanotubes, nano-fibers, quantum dots, and metal and metal-oxide nanoparticles are globally produced in large quantities due to their broad applicability in food-related industries. Because of the unique properties of nanostructures and nanomaterials – such as a large surface area, high activity, and small size, there is some concern about the potential for harmful adverse effects of used nanomaterials on health or the environment. However, because of tremendous advances in different industries, this concern may be unnecessary. This paper presents some uses of nanomaterials in food and related industries and their possible side-effects. This review covers the various aspects of nanomaterials and their impact on human exposure, safety, and environmental concerns. PMID:25763176

Environmental aspects of the geothermal energy utilisation in Poland

NASA Astrophysics Data System (ADS)

Sowiżdżał, Anna; Tomaszewska, Barbara; Drabik, Anna

2017-11-01

Geothermal energy is considered as a strategic and sustainable source of renewable energy that can be effectively managed in several economic sectors. In Poland, despite the abundant potential of such resources, its share in the energy mix of renewable energy sources remains insubstantial. The utilisation of geothermal resources in Poland is related to the hydrogeothermal resources, however, numerous researches related to petrogeothermal energy resources are being performed. The utilisation of each type of energy, including geothermal, has an impact on the natural environment. In case of the effective development of geothermal energy resources, many environmental benefits are pointed out. The primary one is the extraction of clean, green energy that is characterised by the zero-emission rate of pollutants into the atmosphere, what considering the current environmental pollution in many Polish cities remains the extremely important issue. On the other hand, the utilisation of geothermal energy might influence the natural environment negatively. Beginning from the phase of drilling, which strongly interferes with the local landscape or acoustic climate, to the stage of energy exploitation. It should be noted that the efficient and sustainable use of geothermal energy resources is closely linked with the current law regulations at national and European level.

The Interdisciplinary Course in the Legal Aspects of Noise Pollution at Columbia University.

ERIC Educational Resources Information Center

Harris, Cyril M.; Rosenthal, Albert J.

1981-01-01

A course in the legal aspects of noise pollution, cross-listed for students in Columbia University's Law and Engineering Schools, is described. Although noise is used as the major source of environmental pollution in this course, the principles and methodology discussed apply to other forms of environmental law. (MLW)

Surveillance of adverse effects following vaccination and safety of immunization programs.

PubMed

Waldman, Eliseu Alves; Luhm, Karin Regina; Monteiro, Sandra Aparecida Moreira Gomes; Freitas, Fabiana Ramos Martin de

2011-02-01

The aim of the review was to analyze conceptual and operational aspects of systems for surveillance of adverse events following immunization. Articles available in electronic format were included, published between 1985 and 2009, selected from the PubMed/Medline databases using the key words "adverse events following vaccine surveillance", "post-marketing surveillance", "safety vaccine" and "Phase IV clinical trials". Articles focusing on specific adverse events were excluded. The major aspects underlying the Public Health importance of adverse events following vaccination, the instruments aimed at ensuring vaccine safety, and the purpose, attributes, types, data interpretation issues, limitations, and further challenges in adverse events following immunization were describe, as well as strategies to improve sensitivity. The review was concluded by discussing the challenges to be faced in coming years with respect to ensuring the safety and reliability of vaccination programs.

Safety climate in Swiss hospital units: Swiss version of the Safety Climate Survey

PubMed Central

Gehring, Katrin; Mascherek, Anna C.; Bezzola, Paula

2015-01-01

Abstract Rationale, aims and objectives Safety climate measurements are a broadly used element of improvement initiatives. In order to provide a sound and easy‐to‐administer instrument for the use in Swiss hospitals, we translated the Safety Climate Survey into German and French. Methods After translating the Safety Climate Survey into French and German, a cross‐sectional survey study was conducted with health care professionals (HCPs) in operating room (OR) teams and on OR‐related wards in 10 Swiss hospitals. Validity of the instrument was examined by means of Cronbach's alpha and missing rates of the single items. Item‐descriptive statistics group differences and percentage of ‘problematic responses’ (PPR) were calculated. Results 3153 HCPs completed the survey (response rate: 63.4%). 1308 individuals were excluded from the analyses because of a profession other than doctor or nurse or invalid answers (n = 1845; nurses = 1321, doctors = 523). Internal consistency of the translated Safety Climate Survey was good (Cronbach's alpha G erman = 0.86; Cronbach's alpha F rench = 0.84). Missing rates at item level were rather low (0.23–4.3%). We found significant group differences in safety climate values regarding profession, managerial function, work area and time spent in direct patient care. At item level, 14 out of 21 items showed a PPR higher than 10%. Conclusions Results indicate that the French and German translations of the Safety Climate Survey might be a useful measurement instrument for safety climate in Swiss hospital units. Analyses at item level allow for differentiating facets of safety climate into more positive and critical safety climate aspects. PMID:25656302

Safety Assurance in NextGen

NASA Technical Reports Server (NTRS)

HarrisonFleming, Cody; Spencer, Melissa; Leveson, Nancy; Wilkinson, Chris

2012-01-01

The generation of minimum operational, safety, performance, and interoperability requirements is an important aspect of safely integrating new NextGen components into the Communication Navigation Surveillance and Air Traffic Management (CNS/ATM) system. These requirements are used as part of the implementation and approval processes. In addition, they provide guidance to determine the levels of design assurance and performance that are needed for each element of the new NextGen procedures, including aircraft, operator, and Air Navigation and Service Provider. Using the enhanced Airborne Traffic Situational Awareness for InTrail Procedure (ATSA-ITP) as an example, this report describes some limitations of the current process used for generating safety requirements and levels of required design assurance. An alternative process is described, as well as the argument for why the alternative can generate more comprehensive requirements and greater safety assurance than the current approach.

Seniors' perceptions of vehicle safety risks and needs.

PubMed

Shaw, Lynn; Polgar, Jan Miller; Vrkljan, Brenda; Jacobson, Jill

2010-01-01

The investigation of vehicle safety needs for older drivers and passengers is integral for their safe transportation. A program of research on safe transportation for seniors was launched through AUTO21, a Canadian Network of Centres of Excellence. This national research network focuses on a wide range of automotive issues, from materials and design to safety and societal issues. An inductive qualitative inquiry of seniors' driving experiences, safety feature use, and strategies to prevent injury and manage risks was a first step in this program. We conducted interviews and focus groups with 58 seniors without disabilities and 9 seniors with disabilities. We identified a lack of congruity between the vehicle and safety feature design and seniors' needs. Seniors described strategies to manage their safety and that of others. Specific aspects of vehicle design, safety features, and action strategies that support safer use and operation of a vehicle by seniors are outlined.

Developing a driving Safety Index using a Delphi stated preference experiment.

PubMed

Jamson, Samantha; Wardman, Mark; Batley, Richard; Carsten, Oliver

2008-03-01

Whilst empirical evidence is available concerning the effect of some aspects of driving behaviour on safety (e.g. speed choice), there is scant knowledge about safety thresholds, i.e. the point at which behaviour can be considered unsafe. Furthermore, it is almost impossible to ascertain the interaction between various aspects of driving behaviour. For example, how might drivers' lateral control of a vehicle be mediated by their speed choice-are the effects additive or do they cancel each other out. Complex experimental or observational studies would need to be undertaken to establish the nature of such effects. As an alternative, a Delphi study was undertaken to use expert judgement as a way of deriving a first approximation of these threshold and combinatory effects. Using a stated preference technique, road safety professionals make judgements about drivers' safe or unsafe behaviour. The aim was to understand the relative weightings that are assigned to a number of driver behaviours and thereby to construct a Safety Index. As expected, experts were able to establish thresholds, above (or below) which changes to the behavioural parameters had minimal impact on safety. This provided us with a Safety Index, based on a model that had face validity and a convincing range of values. However, the experts found the task of combining these driver behaviours more difficult, reflecting the elusive nature of safety estimates. Suggestions for future validation of our Safety Index are provided.

ENVIRONMENTAL SYSTEMS MANAGEMENT AND SUSTAINABLE SYSTEMS THEORY

EPA Science Inventory

Environmental Systems Management is the management of environmental problems at the systems level fully accounting for the multi-dimensional nature of the environment. This includes socio-economic dimensions as well as the usual physical and life science aspects. This is importa...

Materials aspects of world energy needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1980-01-01

Plenary session papers presented by participants from both developed and developing countries contributed to the information base on materials and energy outlook, international cooperation, economic aspects, and environmental considerations and established the theme for the subsequent workshop sessions. Workshops on ten major aspects of materials-energy interrelationships provided the opportunity of open and informal discussion of critical issues in each area and the development of reasonable consensus on problems and potential solutions. A separate abstract for each of the 10 plenary-session papers, the 10 workshop reports, and the 4 selected papers will appear in Energy Research Abstracts (ERA) and Energy Abstractsmore » for Policy Analysis (EAPA). The brief issue summaries (preprints) will appear individually (total of 75) only in the DOE Energy Data Base.« less

Study of the Continuous Improvement Trend for Health, Safety and Environmental Indicators, after Establishment of Integrated Management System (IMS) in a Pharmaceutical Industry in Iran

PubMed Central

Mariouryad, Pegah; Golbabaei, Farideh; Nasiri, Parvin; Mohammadfam, Iraj