Environmental monitoring handbook for coal conversion facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salk, M.S.; DeCicco, S.G.

1978-05-01

The primary objectives of the Department of Energy's (DOE) coal conversion program are to demonstrate the environmental acceptability, technical feasibility, and economic viability of various technologies for gaseous, liquid, and solid fuels from coal. The Environmental Monitoring Handbook for Coal Conversion Facilities will help accomplish the objective of environmental acceptability by guiding the planning and execution of socioeconomic and environmental monitoring programs for demonstration facilities. These programs will provide information adequate to (1) predict, insofar as is possible, the potential impacts of construction and operation of a coal conversion plant, (2) verify the occurrence of these or any other impactsmore » during construction and operation, (3) determine the adequacy of mitigating measures to protect the environment, (4) develop effluent source terms for process discharges, and (5) determine the effectiveness of pollution control equipment. Although useful in a variety of areas, the handbook is intended primarily for contractors who, as industrial partners with DOE, are building coal conversion plants. For the contractor it is a practical guide on (1) the methodology for developing site- and process-specific environmental monitoring programs, (2) state-of-the-art sampling and analytical techniques, and (3) impact analyses.To correspond to the phases of project activity, the subject matter is divided into four stages of monitoring: (1) a reconnaissance or synoptic survey, (2) preconstruction or baseline, (3) construction, and (4) operation, including process monitoring (prepared by Radian Corp., McLean, Va.). For each stage of monitoring, guidelines are given on socioeconomics, aquatic and terrestrial ecology, air quality and meteorology, surface and groundwater quality, geohydrology and soil survey, and surface water hydrology.« less

Apollo experience report environmental acceptance testing

NASA Technical Reports Server (NTRS)

Laubach, C. H. M.

1976-01-01

Environmental acceptance testing was used extensively to screen selected spacecraft hardware for workmanship defects and manufacturing flaws. The minimum acceptance levels and durations and methods for their establishment are described. Component selection and test monitoring, as well as test implementation requirements, are included. Apollo spacecraft environmental acceptance test results are summarized, and recommendations for future programs are presented.

Gaining Regulator Acceptance of Natural Attenuation as a Remediation Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, M.B.

Monitored natural attenuation (MNA) makes use of biological degradation, chemical reactions with natural materials, and other processes to clean up contaminated soils and groundwater. In the past, the regulatory community has been slow to accept natural attenuation due to a misperception that natural attenuation is a ''do nothing'' approach. Recently however, regulators have been more open to considering MNA as part of an overall clean-up plan that includes active treatment technologies to remove or contain the source of contamination at a site. MNA is currently being implemented at the Savannah River Site for remediation of selected contaminants. The South Carolinamore » Department of Health and Environmental Control, who has regulatory authority over these actions, has accepted this process. Significant overall cost savings are forecast. Additionally, there will be less disruption to the ecosystem, compared with engineered technologies. This paper describes the monitored natural attenuation concept as well as the process of constructive engagement with the regulators to achieve acceptance. Application to DOE, DOD, and commercial sites, as well as acceptability to other regulatory bodies, will be discussed with an emphasis on strategies to prevent false starts in the negotiation process and inventing options that result in mutual gains for all parties.« less

CPICOR{trademark}: Clean power from integrated coal-ore reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wintrell, R.; Miller, R.N.; Harbison, E.J.

1997-12-31

The US steel industry, in order to maintain its basic iron production, is thus moving to lower coke requirements and to the cokeless or direct production of iron. The US Department of Energy (DOE), in its Clean Coal Technology programs, has encouraged the move to new coal-based technology. The steel industry, in its search for alternative direct iron processes, has been limited to a single process, COREX{reg_sign}. The COREX{reg_sign} process, though offering commercial and environmental acceptance, produces a copious volume of offgas which must be effectively utilized to ensure an economical process. This volume, which normally exceeds the internal needsmore » of a single steel company, offers a highly acceptable fuel for power generation. The utility companies seeking to offset future natural gas cost increases are interested in this clean fuel. The COREX{reg_sign} smelting process, when integrated with a combined cycle power generation facility (CCPG) and a cryogenic air separation unit (ASU), is an outstanding example of a new generation of environmentally compatible and highly energy efficient Clean Coal Technologies. This combination of highly integrated electric power and hot metal coproduction, has been designated CPICOR{trademark}, Clean Power from Integrated Coal/Ore Reduction.« less

Solid rocket motors

NASA Technical Reports Server (NTRS)

Carpenter, Ronn L.

1993-01-01

Structural requirements, materials and, especially, processing are critical issues that will pace the introduction of new types of solid rocket motors. Designers must recognize and understand the drivers associated with each of the following considerations: (1) cost; (2) energy density; (3) long term storage with use on demand; (4) reliability; (5) safety of processing and handling; (6) operability; and (7) environmental acceptance.

42 CFR 137.285 - Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter...

Code of Federal Regulations, 2010 CFR

2010-10-01

....285 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Nepa Process § 137.285 Are Self...

Environmental Impact Analysis Process. Draft Environmental Impact Statement, Winnersville Weapons Range, Lanier and Lowndes Counties, Georgia

DTIC Science & Technology

1985-07-01

proposed range . 54 Table 4.4. HUD site acceptability standards ... ........... .. 55 Table 4.5. Predicted pollutant emissions for flight activties...Current flight operations from Moody contribute particulatmatter, carbon monoxide, hydrocarbons, oxides of nitrogen, and oxides of sulfur to the...regional pollution levels, but because of the amounts emitted and the altitudes at which they typically occur, these emissions have only minor impact on

Sceening, down selection, and implementation of environmentally compliant cleaning and insulation bonding for MNASA

NASA Astrophysics Data System (ADS)

Keen, Jill M.; Hutchens, D. E.; Smith, G. M.; Dillard, T. W.

1994-06-01

MNASA, a quarter-scale space shuttle solid rocket motor, has historically been processed using environmentally and physiologically harmful chemicals. This program draws from previous testing done in support of full-scale manufacturing and examines the synergy and interdependency between environmentally acceptable materials for Solid Rocket Motor insulation applications, bonding, corrosion inhibiting, painting, priming and cleaning; and then implements new materials and processes in sub-scale motors. Tests have been conducted to eliminate or minimize hazardous chemicals used in the manufacture of MNASA components and identify alternate materials and/or processes following NASA Operational Environment Team (NOET) priorities. This presentation describes implementation of high pressure water refurbishment cleaning, aqueous precision cleaning using both Brulin 815 GD and Jettacin and insulation case bonding using ODC compliant primers and adhesives.

42 CFR 137.285 - Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter...

Code of Federal Regulations, 2011 CFR

2011-10-01

...-Governance Tribes required to accept Federal environmental responsibilities to enter into a construction... 42 Public Health 1 2011-10-01 2011-10-01 false Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter into a construction project agreement? 137.285 Section 137...

30 CFR 250.1910 - What safety and environmental information is required?

Code of Federal Regulations, 2011 CFR

2011-07-01

... information including, as appropriate, a simplified process flow diagram and acceptable upper and lower limits, where applicable, for items such as temperature, pressure, flow and composition; and (3) mechanical design information including, as appropriate, piping and instrument diagrams; electrical area...

30 CFR 250.1910 - What safety and environmental information is required?

Code of Federal Regulations, 2013 CFR

2013-07-01

... appropriate, a simplified process flow diagram and acceptable upper and lower limits, where applicable, for items such as temperature, pressure, flow and composition; and (3) mechanical design information including, as appropriate, piping and instrument diagrams; electrical area classifications; equipment...

30 CFR 250.1910 - What safety and environmental information is required?

Code of Federal Regulations, 2012 CFR

2012-07-01

... appropriate, a simplified process flow diagram and acceptable upper and lower limits, where applicable, for items such as temperature, pressure, flow and composition; and (3) mechanical design information including, as appropriate, piping and instrument diagrams; electrical area classifications; equipment...

30 CFR 250.1910 - What safety and environmental information is required?

Code of Federal Regulations, 2014 CFR

2014-07-01

... appropriate, a simplified process flow diagram and acceptable upper and lower limits, where applicable, for items such as temperature, pressure, flow and composition; and (3) mechanical design information including, as appropriate, piping and instrument diagrams; electrical area classifications; equipment...

Selectively strippable paint schemes

NASA Astrophysics Data System (ADS)

Stein, R.; Thumm, D.; Blackford, Roger W.

1993-03-01

In order to meet the requirements of more environmentally acceptable paint stripping processes many different removal methods are under evaluation. These new processes can be divided into mechanical and chemical methods. ICI has developed a paint scheme with intermediate coat and fluid resistant polyurethane topcoat which can be stripped chemically in a short period of time with methylene chloride free and phenol free paint strippers.

TRU waste absorbent addition project at the Idaho National Engineering and Environmental Laboratory.

PubMed

Colson, R Griff; Auman, Laurence E

2003-08-01

ABSTRACT In order to meet a commitment to ship 3,100 m3 of transuranic waste to the Waste Isolation Pilot Plant (WIPP), the Idaho National Engineering and Environmental Laboratory (INEEL) developed a process to add absorbent to TRU waste drums that did not meet WIPP waste acceptance criteria. The development, implementation, and safe completion of this project contributed to the INEEL's success in meeting the commitment three months early.

Environmental Impact Analysis Process. Draft Environmental Impact Statement, Winnersville Weapons Range, Lanier and Lowndes Counties, Georgia

DTIC Science & Technology

1985-07-01

pollutant emissions for flight activities over the proposed range (grams of pollutant per sortie)a Carbon Unburned Oxides of Particulates Oxides Aircraft...Table 4.4. HUD site acceptability standards ... ........... .. 55 Table 4.5. Predicted pollutant emissions for flight activties over the proposed range...matter, carbon monoxide, hydrocarbons, oxides of nitrogen, and oxides of sulfur to the regional pollution levels, but because of the amounts emitted and

GY SAMPLING THEORY IN ENVIRONMENTAL STUDIES 2: SUBSAMPLING ERROR MEASUREMENTS

EPA Science Inventory

Sampling can be a significant source of error in the measurement process. The characterization and cleanup of hazardous waste sites require data that meet site-specific levels of acceptable quality if scientifically supportable decisions are to be made. In support of this effort,...

Learning Style Profile: Examiner's Manual.

ERIC Educational Resources Information Center

Keefe, James W.; Monk, John S.

This examiner's manual accompanies the Learning Style Profile (LSP), which measures cognitive skills as well as affective and environmental preferences. Charles Letteri's General Operations Model was accepted as the prototype for relating learning styles to cognitive information processing. The LSP was developed from 1983 to 1986; several versions…

Environmental impacts caused by cemeteries and crematoria, new funeral technologies, and preferences of the Northeastern and Southern Brazilian population as for the funeral process.

PubMed

da Cruz, Nicholas Joseph Tavares; Lezana, Álvaro Guillermo Rojas; Freire Dos Santos, Paulo da Cruz; Santana Pinto, Ibsen Mateus Bittencourt; Zancan, Claudio; Silva de Souza, Gustavo Henrique

2017-11-01

Cemeteries and crematoria are the main funeral ways used in the world nowadays. It is a little-studied segment in the present days, mainly as for the possible environmental impacts in the environment, such as those derived from dental amalgam, prostheses, and dioxins, among other. This article aimed to identify the environmental impacts caused by cemeteries and crematoria and to point out new trends in funeral processes such as freeze-drying and alkaline hydrolysis. The study is justified due to the large part of the Brazilian population that do not know the environmental impacts caused by cemeteries and crematoria, as well as to bring information about the new processes. For that, a research was carried out with 400 people. The main results show that among all the funeral processes, the new freeze-drying process was opted by 33% of the sample. We also identified that the main reasons for choosing the funeral process were less environmental impact (28%), no after-death expenses (grave payment) (16.1%), and the possibility of putting away or throwing away the remains wherever you want (14.9%). Finally, new funeral processes were well accepted by the Brazilian population-those who were interviewed-due to their benefits.

Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China.

PubMed

Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G L; Liu, Renzhi

2017-04-20

Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21-40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents.

On Science, Ecology and Environmentalism

ERIC Educational Resources Information Center

Tulloch, Lynley

2013-01-01

Using ecological science as a backdrop for this discussion, the author applies Michel Foucault's historical genealogical strategy to an analysis of the processes through which sustainable development (SD) gained hegemonic acceptance in the West. She analyses some of the ideological mutations that have seen SD emerge from an environmentalist…

Low NO/x/ heavy fuel combustor program

NASA Technical Reports Server (NTRS)

Lister, E.; Niedzwiecki, R. W.; Nichols, L.

1980-01-01

The paper deals with the 'Low NO/x/ Heavy Fuel Combustor Program'. Main program objectives are to generate and demonstrate the technology required to develop durable gas turbine combustors for utility and industrial applications, which are capable of sustained, environmentally acceptable operation with minimally processed petroleum residual fuels. The program will focus on 'dry' reductions of oxides of nitrogen (NO/x/), improved combustor durability and satisfactory combustion of minimally processed petroleum residual fuels. Other technology advancements sought include: fuel flexibility for operation with petroleum distillates, blends of petroleum distillates and residual fuels, and synfuels (fuel oils derived from coal or shale); acceptable exhaust emissions of carbon monoxide, unburned hydrocarbons, sulfur oxides and smoke; and retrofit capability to existing engines.

Low NO(x) heavy fuel combustor program

NASA Technical Reports Server (NTRS)

Lister, E.; Niedzwiecki, R. W.; Nichols, L.

1979-01-01

The 'low nitrogen oxides heavy fuel combustor' program is described. Main program objectives are to generate and demonstrate the technology required to develop durable gas turbine combustors for utility and industrial applications, which are capable of sustained, environmentally acceptable operation with minimally processed petroleum residual fuels. The program will focus on 'dry' reductions of oxides of nitrogen, improved combustor durability, and satisfactory combustion of minimally processed petroleum residual fuels. Other technology advancements sought include: fuel flexibility for operation with petroleum distillates, blends of petroleum distillates and residual fuels, and synfuels (fuel oils derived from coal or shale); acceptable exhaust emissions of carbon monoxide, unburned hydrocarbons, sulfur oxides and smoke; and retrofit capability to existing engines.

Environmental Assessment of Proposed Mixed-Use Business Park on an Enchanced Use Lease at Grand Forks Air Force Base, North Dakota

DTIC Science & Technology

2014-04-01

remediate past environmental contamination on Air Force installations. Past procedures for managing and disposing wastes, although accepted at the...time, resulted in contamination of the environment. The ERP has established a process to evaluate past disposal sites, control the migration of... contaminants , identify potential hazards to human health and the environment, and remediate the sites. 3.5.2 Existing Conditions GFAFB is a

Cost/Benefits of Solid Waste Reuse

ERIC Educational Resources Information Center

Schulz, Helmut W.

1975-01-01

Municipalities and industry are being forced to seek alternatives to sanitary landfills and incineration as means of eliminating solid wastes. Based on the Columbia study, the two most cost-effective, environmentally acceptable alternatives are the high temperature, oxygen-fed pyrolysis process and the co-combustion of refuse-derived fuel in…

Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China

PubMed Central

Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G. L.; Liu, Renzhi

2017-01-01

Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21–40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents. PMID:28425956

Environmental Impact Analysis Process. Final Environmental Impact Statement for Proposed Air Force Reserve Mission Change (C-130 to C-5A Aircraft) and Westover Metropolitan Development Corporation (Expansion of Civil Aviation Operations through 1995) at Westover Air Force Base, Massachusetts. Volume 1

DTIC Science & Technology

1987-04-01

many of which would not be acceptable under current environmental regula- tions but which were in compliance with the standards in effect at tK2 ...waste management regulations and issued a Notice of Violation (NOV) citing specific deficiencies in hazardous waste management procedures. The focus of...materials are handled and disposed of in compliance with applicable federal, state, and local regulations. Specific deficiencies cited in the NOV included

Investigating Elementary School Students' Technology Acceptance by Applying Digital Game-Based Learning to Environmental Education

ERIC Educational Resources Information Center

Cheng, Yuh-Ming; Lou, Shi-Jer; Kuo, Sheng-Huang; Shih, Ru-Chu

2013-01-01

In order to improve and promote students' environmental knowledge, attitudes, and behaviour, integrating environmental education into the primary education curriculum has become a key issue for environmental education. For this reason, this study aimed to investigate elementary school students' acceptance of technology applying digital game-based…

Using Transformative Learning Theory to Explore the Mechanisms of Citizen Participation for Environmental Education on the Removal of Invasive Species: The Case of Green Island, Taiwan

ERIC Educational Resources Information Center

Chao, Ren-Fang

2017-01-01

The purpose of this study is to investigate the process of participation in the transformative learning process for invasive species by community volunteers and voluntourists. The results show that children play an important role in motivating adults to accept new ideas, and for both community volunteers and voluntourists, "dialogue" has…

Concerning modeling of double-stage water evaporation cooling

NASA Astrophysics Data System (ADS)

Shatskiy, V. P.; Fedulova, L. I.; Gridneva, I. V.

2018-03-01

The matter of need for setting technical norms for production, as well as acceptable microclimate parameters, such as temperature and humidity, at the work place, remains urgent. Use of certain units should be economically sound and that should be taken into account for construction, assembly, operation, technological, and environmental requirements. Water evaporation coolers are simple to maintain, environmentally friendly, and quite cheap, but the development of the most efficient solutions requires mathematical modeling of the heat and mass transfer processes that take place in them.

Use of strategic environmental assessment in the site selection process for a radioactive waste disposal facility in Slovenia.

PubMed

Dermol, Urška; Kontić, Branko

2011-01-01

The benefits of strategic environmental considerations in the process of siting a repository for low- and intermediate-level radioactive waste (LILW) are presented. The benefits have been explored by analyzing differences between the two site selection processes. One is a so-called official site selection process, which is implemented by the Agency for radwaste management (ARAO); the other is an optimization process suggested by experts working in the area of environmental impact assessment (EIA) and land-use (spatial) planning. The criteria on which the comparison of the results of the two site selection processes has been based are spatial organization, environmental impact, safety in terms of potential exposure of the population to radioactivity released from the repository, and feasibility of the repository from the technical, financial/economic and social point of view (the latter relates to consent by the local community for siting the repository). The site selection processes have been compared with the support of the decision expert system named DEX. The results of the comparison indicate that the sites selected by ARAO meet fewer suitability criteria than those identified by applying strategic environmental considerations in the framework of the optimization process. This result stands when taking into account spatial, environmental, safety and technical feasibility points of view. Acceptability of a site by a local community could not have been tested, since the formal site selection process has not yet been concluded; this remains as an uncertain and open point of the comparison. Copyright © 2010 Elsevier Ltd. All rights reserved.

Measures and metrics of sustainable diets with a focus on milk, yogurt, and dairy products

PubMed Central

Drewnowski, Adam

2018-01-01

The 4 domains of sustainable diets are nutrition, economics, society, and the environment. To be sustainable, foods and food patterns need to be nutrient-rich, affordable, culturally acceptable, and sparing of natural resources and the environment. Each sustainability domain has its own measures and metrics. Nutrient density of foods has been assessed through nutrient profiling models, such as the Nutrient-Rich Foods family of scores. The Food Affordability Index, applied to different food groups, has measured both calories and nutrients per penny (kcal/$). Cultural acceptance measures have been based on relative food consumption frequencies across population groups. Environmental impact of individual foods and composite food patterns has been measured in terms of land, water, and energy use. Greenhouse gas emissions assess the carbon footprint of agricultural food production, processing, and retail. Based on multiple sustainability metrics, milk, yogurt, and other dairy products can be described as nutrient-rich, affordable, acceptable, and appealing. The environmental impact of dairy farming needs to be weighed against the high nutrient density of milk, yogurt, and cheese as compared with some plant-based alternatives. PMID:29206982

THE COMMUNITY PLANNING PROCESS. KANSAS STATE UNIVERSITY SHORT COURSE SERIES ON COMMUNITY PLANNING AND DEVELOPMENT, 6.

ERIC Educational Resources Information Center

WEISENBURGER, RAY B.

PART OF A KANSAS STATE UNIVERSITY SERIES ON COMMUNITY PLANNING AND DEVELOPMENT, THIS MONOGRAPH DISCUSSES THE STAGES IN THE PREPARATION AND IMPLEMENTATION OF COMPREHENSIVE URBAN SCHEMES. FIRST OF ALL, SOCIAL ACCEPTANCE, ECONOMIC, FEASIBILITY, POLITICAL RESPONSIBILITY, AND ENVIRONMENTAL SATISFACTION ARE VITAL TO SUCCESSFUL PLANNING. ORGANIZATION FOR…

Surface preparation of Ti-3Al-2.5V alloy tubes for welding using a fiber laser

NASA Astrophysics Data System (ADS)

Kumar, Aniruddha; Gupta, Mool C.

2009-11-01

Ti-3Al-2.5V tubes are widely used in aircraft hydraulic systems. Meticulous surface preparation before welding is necessary to obtain a sound weld involving these alloy tubes. Conventionally this is done by cleaning with environmentally malign toxic chemicals, such as, hydrofluoric acid and nitric acid. This paper describes the laser-cleaning process of the surface of these tubes with a fiber laser as a preparation for pulsed gas tungsten arc welding and results obtained. A simple one-dimensional heat equation has been solved to evaluate the temperature profile of the irradiated surface. It is shown that surface preparation by laser cleaning can be an environmentally friendly alternative process by producing acceptable welds with laser-processed tubes.

The effect of membrane filtration on dissolved trace element concentrations

USGS Publications Warehouse

Horowitz, A.J.; Lum, K.R.; Garbarino, J.R.; Hall, G.E.M.; Lemieux, C.; Demas, C.R.

1996-01-01

The almost universally accepted operational definition for dissolved constituents is based on processing whole-water samples through a 0.45-??m membrane filter. Results from field and laboratory experiments indicate that a number of factors associated with filtration, other than just pore size (e.g., diameter, manufacturer, volume of sample processed, amount of suspended sediment in the sample), can produce substantial variations in the 'dissolved' concentrations of such elements as Fe, Al, Cu, Zn, Pb, Co, and Ni. These variations result from the inclusion/exclusion of colloidally- associated trace elements. Thus, 'dissolved' concentrations quantitated by analyzing filtrates generated by processing whole-water through similar pore- sized membrane filters may not be equal/comparable. As such, simple filtration through a 0.45-??m membrane filter may no longer represent an acceptable operational definition for dissolved chemical constituents. This conclusion may have important implications for environmental studies and regulatory agencies.

SMS/GOES cell and battery data analysis report

NASA Technical Reports Server (NTRS)

Armantrout, J. D.

1977-01-01

The nickel-cadmium battery design developed for the Synchronous Meteorological Satellite (SMS) and Geostationary Operational Environmental Satellite (GOES) provided background and guidelines for future development, manufacture, and application of spacecraft batteries. SMS/GOES battery design, development, qualification testing, acceptance testing, and life testing/mission performance characteristics were evaluated for correlation with battery cell manufacturing process variables.

The Potential Role of Virtual Reality in Environmental Education.

ERIC Educational Resources Information Center

Taylor, Gregory L.; Disinger, John F.

1997-01-01

Investigates the acceptability and possible role of virtual reality (VR) in environmental education. Among the principal findings were that the sample population of environmental educators indicated an acceptance of VR as a teaching tool. VR applications that allow students to have an experience not available in the physical world were perceived…

How does the context and design of participatory decision-making processes affect their outcomes? Evidence from sustainable land management in global drylands.

NASA Astrophysics Data System (ADS)

de Vente, Joris; Reed, Mark; Stringer, Lindsay; Valente, Sandra; Newig, Jens

2014-05-01

It is widely accepted that the design of participatory processes in environmental management needs to be adapted to local contexts. Yet, it is not clear which elements of process design are universal, making it difficult to design processes that deliver beneficial outcomes across different contexts. We used empirical evidence to analyse the extent to which context and process design can enable or impede stakeholder participation and facilitate beneficial environmental and social outcomes in a range of decision-making contexts where stakeholders are engaged in environmental management. To explore the role of national-scale context on the outcomes of participatory processes, we interviewed facilitators from a process that was replicated across 13 dryland study sites around the world, which focussed on selecting Sustainable Land Management (SLM) options in close collaboration with stakeholders. To explore the role of process design and local context, we interviewed participants and facilitators in 11 case studies in Spain and Portugal in which different process designs were used. Interview data were analysed using a combination of quantitative and qualitative approaches to characterise relationships between process design, context and process outcomes. The similarity of outcomes across the 13 international study sites suggested that the national socio-cultural context in which a participatory process is conducted has little impact on its outcomes. However, analysis of cases from Spain and Portugal showed that some aspects of local context may affect outcomes. Having said this, factors associated with process design and participant selection played a more significant role in influencing outcomes in both countries. Processes that led to more beneficial outcomes for the environment and/or participants were likely to include: the legitimate representation of stakeholders; professional facilitation including structured methods for eliciting and aggregating information and balancing power dynamics between participants; and the provision of information and decision-making power to all participants. Participatory processes initiated or facilitated by government bodies led to significantly less trust, information gain, learning, and flexible solutions. However, in these processes, decisions were more acceptable to and likely to be implemented by governments and by those who had to apply them on the ground. These findings provide a solid empirical basis for best practice in the design of participatory processes in SLM in a number of contexts internationally, which if followed, increase the likelihood of providing beneficial environmental and social outcomes for those involved.

Environmental assessment for the construction, operation, and decommissioning of the Waste Segregation Facility at the Savannah River Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-01-01

This Environmental Assessment (EA) has been prepared by the Department of Energy (DOE) to assess the potential environmental impacts associated with the construction, operation and decontamination and decommissioning (D&D) of the Waste Segregation Facility (WSF) for the sorting, shredding, and compaction of low-level radioactive waste (LLW) at the Savannah River Site (SRS) located near Aiken, South Carolina. The LLW to be processed consists of two waste streams: legacy waste which is currently stored in E-Area Vaults of SRS and new waste generated from continuing operations. The proposed action is to construct, operate, and D&D a facility to process low-activity job-controlmore » and equipment waste for volume reduction. The LLW would be processed to make more efficient use of low-level waste disposal capacity (E-Area Vaults) or to meet the waste acceptance criteria for treatment at the Consolidated Incineration Facility (CIF) at SRS.« less

Disrupting privilege, identity, and meaning: A reflexive dance of environmental education

NASA Astrophysics Data System (ADS)

Neilson, Alison Laurie

By inviting educators from diverse backgrounds to participate in creative conversations, I had hoped to reflect on experiences that had helped construct our theories of environmental education, and inform practice. I sought consistency across the espoused ethics of co-participants, namely critical perspectives grounded in environmental justice. However, this quest was interrupted by a growing awareness of the interference of power dynamics between myself and the other participants, and of my own commitment to respect the stories being told. This narrative describes my "dance" of meaning making. The community dance examining privilege, identity and meaning is a study of how I may be contributing to the same oppressive situations I passionately strive to work against. Concepts of knowledge, power, and identity ebbed and flowed within stories drawn from the mountains of Tanzania to the hills of Colombia, and from the frozen shores of Kirkland Lake to the trout filled streams of Karman, Iran. Making meaning is itself an act of power and privilege, so I danced to make room for multiple understandings of these stories, of environmental education, and of research. This work offers an experience of disruption that raises questions and broadens the inclusion of people, ideas and other life into "accepted" research and pedagogical practices. Conventions embedded within research and education were disrupted throughout this reflexive process. As the author of this text, I was uncomfortable with the role of being the dominant voice, and consciously chose not to impose my interpretation on the stories shared by co-participants. The struggle to resist the very privilege in which my own education practice and this research process are so deeply steeped revealed normative forces that often threaten to undermine attempts by educators and researchers to act according to critical theories and environmental justice ethics. To accept the invitation to dance with the text is to step into the rhythmic intricacies of a collaborative process of reflexion. Circling hand-in-hand and giving weight to fellow dancers' movements shifts individuals from being carriers of truths to being community members sharing in the collaborative process of dancing the world into existence.

Predominant terminal electron accepting processes during organic matter degradation: Spatio-temporal changes in Ashtamudi estuary, Kerala, India

NASA Astrophysics Data System (ADS)

Vincent, Salom Gnana Thanga; Reshmi, R. R.; Hassan, S. Junaid; Nair, K. Deepa; Varma, Ajayakumar

2017-11-01

Anaerobic microbial communities in the anoxic zones degrade organic matter in estuarine sediments. Thermodynamic energy yield for the oxidation reactions with various electron acceptors decreases in the order of O2> NO3- > Mn4+> Fe3+> SO42- > CO2. The predominant terminal electron accepting (TEA) process has an influence on the biogeochemical cycles of nutrients as well as the production of important greenhouse gases such as nitrous oxide and methane from estuarine sediments. The research questions of this study were (1) what are the environmental factors (pH, salinity, organic carbon, sulphate, redox potential) explaining variability in TEA activities such as nitrate reduction rate (NRR), iron reduction rate (IRR), sulphate reduction rate (SRR) and methane production rate (MPR) and (2) which is the predominant TEA process during degradation of organic matter. To determine the TEA activities, sediment samples collected from 13 sampling stations of Ashtamudi estuary during monsoon 2014 and summer 2015 were incubated with sulphate depleted artificial seawater, under anaerobic conditions for 72 h, in microcosms. Spatial variations dominated temporal variations for environmental variables. Nevertheless, biogeochemical processes showed a distinct seasonal variation. Total TEA activity was higher during summer than monsoon, indicating the higher heterotrophic microbial activity favored by high temperature. Individually, SRR was the maximum during summer, while NRR, IRR and MPR were the maximum during monsoon. Sulphate reduction was observed to be the predominant electron accepting process in all sampling stations with cumulative values of 3125.79 and 4046.07 nmol cm-3 day-1 during monsoon and summer respectively. This was followed by NRR, IRR and MPR. Although thermodynamically more favorable, NRR could not predominate due to scarcity of nitrate in sediments. Nevertheless, two-fold and five-fold increase in methanogenesis and denitrification were observed respectively during monsoon in sampling stations, which cannot be ignored, owing to the importance of methane and nitrous oxide as a potent greenhouse gas.

Environment-friendly drilling operation technology

NASA Astrophysics Data System (ADS)

Luo, Huaidong; Jing, Ning; Zhang, Yanna; Huang, Hongjun; Wei, Jun

2017-01-01

Under the circumstance that international safety and environmental standards being more and more stringent, drilling engineering is facing unprecedented challenges, the extensive traditional process flow is no longer accepted, the new safe and environment-friendly process is more suitable to the healthy development of the industry. In 2015, CNPCIC adopted environment-friendly drilling technology for the first time in the Chad region, ensured the safety of well control, at the same time increased the environmental protection measure, reduced the risk of environmental pollution what obtain the ratification from local government. This technology carries out recovery and disposal of crude oil, cuttings and mud without falling on the ground. The final products are used in road and well site construction, which realizes the reutilization of drilling waste, reduces the operating cost, and provides a strong technical support for cost-cutting and performance-increase of drilling engineering under low oil price.

Environmental auditing in hospitals: approach and implementation in an university hospital.

PubMed

Dettenkofer, M; Kümmerer, K; Schuster, A; Mühlich, M; Scherrer, M; Daschner, F D

1997-05-01

Medical audit in infection control today is accepted as an important element in the quality assurance of health care. In contrast, environmental auditing, which was approved in 1993 by the Council of the European Communities for industry ("Eco-Management and Audit Scheme-EMAS), has not so far been used as a tool to control and reduce environmental pollution caused by medical care in hospitals. The aim of this study was to investigate, whether environmental auditing in hospitals is useful. This process should also be cost effective. In this paper, methodological and organizational issues are described. Initially an environmental review of activities at the University Hospital, Freiburg and an eco-analysis of the input and output were performed. The first results of the study and a critical discussion will be presented in another paper.

Process envelopes for stabilisation/solidification of contaminated soil using lime-slag blend.

PubMed

Kogbara, Reginald B; Yi, Yaolin; Al-Tabbaa, Abir

2011-09-01

Stabilisation/solidification (S/S) has emerged as an efficient and cost-effective technology for the treatment of contaminated soils. However, the performance of S/S-treated soils is governed by several intercorrelated variables, which complicates the optimisation of the treatment process design. Therefore, it is desirable to develop process envelopes, which define the range of operating variables that result in acceptable performance. In this work, process envelopes were developed for S/S treatment of contaminated soil with a blend of hydrated lime (hlime) and ground granulated blast furnace slag (GGBS) as the binder (hlime/GGBS = 1:4). A sand contaminated with a mixture of heavy metals and petroleum hydrocarbons was treated with 5%, 10% and 20% binder dosages, at different water contents. The effectiveness of the treatment was assessed using unconfined compressive strength (UCS), permeability, acid neutralisation capacity and contaminant leachability with pH, at set periods. The UCS values obtained after 28 days of treatment were up to ∼800 kPa, which is quite low, and permeability was ∼10(-8) m/s, which is higher than might be required. However, these values might be acceptable in some scenarios. The binder significantly reduced the leachability of cadmium and nickel. With the 20% dosage, both metals met the waste acceptance criteria for inert waste landfill and relevant environmental quality standards. The results show that greater than 20% dosage would be required to achieve a balance of acceptable mechanical and leaching properties. Overall, the process envelopes for different performance criteria depend on the end-use of the treated material.

Environmental Impact of Flame Retardants (Persistence and Biodegradability)

PubMed Central

Segev, Osnat; Kushmaro, Ariel; Brenner, Asher

2009-01-01

Flame-retardants (FR) are a group of anthropogenic environmental contaminants used at relatively high concentrations in many applications. Currently, the largest market group of FRs is the brominated flame retardants (BFRs). Many of the BFRs are considered toxic, persistent and bioaccumulative. Bioremediation of contaminated water, soil and sediments is a possible solution for the problem. However, the main problem with this approach is the lack of knowledge concerning appropriate microorganisms, biochemical pathways and operational conditions facilitating degradation of these chemicals at an acceptable rate. This paper reviews and discusses current knowledge and recent developments related to the environmental fate and impact of FRs in natural systems and in engineered treatment processes. PMID:19440395

Economic considerations of battery recycling based on the Recytec process

NASA Astrophysics Data System (ADS)

Ammann, Pierre

The Recytec process is successfully operated on a continuous industrial base since autumn 1994. All the products are regularly re-used without any problems and environmental limits are fully respected. The European Community Battery Directive is valid since many years and only a few countries like Switzerland and The Netherlands have implemented it in national guidelines. In the meantime, battery producers have accepted the necessity of the recycling of mercury-free batteries in order to prevent the contamination of municipal waste streams by other heavy metals, such as zinc and cadmium. Recycling processes like the Recytec process are considered by the battery producers as highly expensive and they are looking for cheaper alternatives. Steel works are confronted with a market change and have to produce less quantities of better quality steels with more stringent environmental limits. The electric arc furnace (EAF), one of the chosen battery destruction techniques, is producing 20% of the European steel. Even if the battery mixes contain only mercury-free batteries, the residual mercury content and the zinc concentration will be too high to insure a good steel quality, if all collected batteries will be fed in EAF. In Waelz kilns (production of zinc oxide concentrates for zinc producers) the situation is the same with regard to the residual mercury concentration and environmental limits. Sorting technologies for the separation of battery mixes into the different battery chemistries will presently fail because the re-users of these sorted mercury-free batteries are not able to accept raw waste batteries but they are interested in some fractions of them. This means that in any case pretreatment is an unavoidable step before selective reclamation of waste batteries. The Recytec process is the low-cost partner in a global strategy for battery recycling. This process is very flexible and will be able to follow, with slight and inexpensive adaptations of the equipment, the trend in mercury content and quantities of collected batteries.

Decision makers, scientists and the public as stakeholders: the connection between traffic intervention policy and air quality in a local context.

NASA Astrophysics Data System (ADS)

Weiand, L.; von Schneidemesser, E.; Schmitz, S.; Niehoff, N.

2017-12-01

Urban mobility is a key issue to make cities more inclusive, safer, and more environmentally friendly. To ensure a sustainable future, local policy should, among other actions, aim to improve access to sustainable transport systems and enhance mobility opportunities, while at the same time addressing critical environmental and health targets. In order to assess whether these objectives are met, measures should be informed and evaluated from a social and environmental perspective. Citizens' opinions and the acceptance of environmental policies are crucial to successful implementation of urban mobility measures. The complexity of urban air quality issues require transparent decision-making processes that are grounded in evidence-based research and embrace local knowledge. From this basis, our research group and the city council collaborated to assess a new policy action intended to address environmental and health targets. This talk will present the results from the assessment of this new policy, that was implemented in large part to alleviate air quality exceedances, from the perspective of public acceptability of the measure and the approach taken by the city council to implement the measure. Parallel to assessing the effect of this policy on the recorded levels of air pollution and traffic counts, we conducted a social survey to examine public opinions of this measure, as well as the link between air quality awareness and mobility decisions. 4661 responses were collected over a one month period. Survey participants were those most affected by the traffic measure, including commuters and local residents. The results show that there is an overall low acceptance rate of the measure (8%) as well as low concern for air quality (2,90 - where 1 = not concerned and 6 = very concerned). We also found that there is a negative relationship between air quality rating and air quality concern. A similar approach was taken to understand climate change concern, which will be discussed further in the talk as well as how concern for air quality can increase acceptability for climate change mitigation policies.

Designer carbon nanotubes for contaminant removal in water and wastewater: A critical review.

PubMed

Sarkar, Binoy; Mandal, Sanchita; Tsang, Yiu Fai; Kumar, Pawan; Kim, Ki-Hyun; Ok, Yong Sik

2018-01-15

The search for effective materials for environmental cleanup is a scientific and technological issue of paramount importance. Among various materials, carbon nanotubes (CNTs) possess unique physicochemical, electrical, and mechanical properties that make them suitable for potential applications as environmental adsorbents, sensors, membranes, and catalysts. Depending on the intended application and the chemical nature of the target contaminants, CNTs can be designed through specific functionalization or modification processes. Designer CNTs can remarkably enhance contaminant removal efficiency and facilitate nanomaterial recovery and regeneration. An increasing number of CNT-based materials have been used to treat diverse organic, inorganic, and biological contaminants. These success stories demonstrate their strong potential in practical applications, including wastewater purification and desalination. However, CNT-based technologies have not been broadly accepted for commercial use due to their prohibitive cost and the complex interactions of CNTs with other abiotic and biotic environmental components. This paper presents a critical review of the existing literature on the interaction of various contaminants with CNTs in water and soil environments. The preparation methods of various designer CNTs (surface functionalized and/or modified) and the functional relationships between their physicochemical characteristics and environmental uses are discussed. This review will also help to identify the research gaps that must be addressed for enhancing the commercial acceptance of CNTs in the environmental remediation industry. Copyright © 2017 Elsevier B.V. All rights reserved.

Recovering gold from thiosulfate leach pulps via ion exchange

NASA Astrophysics Data System (ADS)

Nicol, Michael J.; O'Malley, Glen

2002-10-01

Increasing environmental and occupational safety concerns about the use of cyanide in gold processing has increased interest in more acceptable alternative lixiviants, the most promising of which is thiosulfate. However, the thiosulfate process lacks a proven inpulp method of recovering the dissolved gold because activated carbon is not effective for the absorption of the gold-thiosulfate complex. This paper describes work aimed at evaluating the effectiveness of commercially available anion exchange resins for the recovery of gold from thiosulfate leach liquors and pulps.

[Policy analysis: study of public policy of environmental health in a metropolis of northeastern Brazil].

PubMed

Lyra, Tereza Maciel; Araújo Júnior, José Luiz do Amaral Correa de

2014-09-01

The analysis of health policies has improved in Brazil despite a plethora of different methodological approaches. Based on the model developed by Walt and Gilson in 1994, the Environmental Health Program (EHP) of Recife as a policy based on the Health Promotion principles of the Unified Health System (SUS) and Agenda 21 was analyzed. An attempt was made to understand the context during the development and implementation of the EHP, the drafting process and which actors influenced the EHP agenda content and proposal. A qualitative case study was conducted, with semi-structured interviews with key actors. In terms of context, the findings include the influence of the municipal election, the socio-sanitary characteristics of Recife, the choice of the Secretary of Health and the management teams, acceptance by the technicians and the funding increase. In terms of the process, the acceptance of the managers must be stressed. Regarding the actors, the managers, sector technicians, non-sectorial actors with viability studies stood out. The content of the EHP coincided with the SUS and Health Promotion principles. Implementation was influenced by the dengue fever epidemic (2002), and cultural institutional factors that put pressure on the order of implementation of the planned actions.

Fluvial geomorphology and river engineering: future roles utilizing a fluvial hydrosystems framework

NASA Astrophysics Data System (ADS)

Gilvear, David J.

1999-12-01

River engineering is coming under increasing public scrutiny given failures to prevent flood hazards and economic and environmental concerns. This paper reviews the contribution that fluvial geomorphology can make in the future to river engineering. In particular, it highlights the need for fluvial geomorphology to be an integral part in engineering projects, that is, to be integral to the planning, implementation, and post-project appraisal stages of engineering projects. It should be proactive rather than reactive. Areas in which geomorphologists will increasingly be able to complement engineers in river management include risk and environmental impact assessment, floodplain planning, river audits, determination of instream flow needs, river restoration, and design of ecologically acceptable channels and structures. There are four key contributions that fluvial geomorphology can make to the engineering profession with regard to river and floodplain management: to promote recognition of lateral, vertical, and downstream connectivity in the fluvial system and the inter-relationships between river planform, profile, and cross-section; to stress the importance of understanding fluvial history and chronology over a range of time scales, and recognizing the significance of both palaeo and active landforms and deposits as indicators of levels of landscape stability; to highlight the sensitivity of geomorphic systems to environmental disturbances and change, especially when close to geomorphic thresholds, and the dynamics of the natural systems; and to demonstrate the importance of landforms and processes in controlling and defining fluvial biotopes and to thus promote ecologically acceptable engineering. Challenges facing fluvial geomorphology include: gaining full acceptance by the engineering profession; widespread utilization of new technologies including GPS, GIS, image analysis of satellite and airborne remote sensing data, computer-based hydraulic modeling and geophysical techniques; dovetailing engineering approaches to the study of river channels which emphasize reach-scale flow resistance, shear stresses, and material strength with catchment scale geomorphic approaches, empirical predictions, bed and bank processes, landform evolution, and magnitude-frequency concepts; producing accepted river channel typologies; fundamental research aimed at producing more reliable deterministic equations for prediction of bed and bank stability and bedload transport; and collaboration with aquatic biologists to determine the role and importance of geomorphologically and hydraulically defined habitats.

Nutrition and physical activity self-assessment for child care (NAP SACC): results from a pilot intervention.

PubMed

Benjamin, Sara E; Ammerman, Alice; Sommers, Janice; Dodds, Janice; Neelon, Brian; Ward, Dianne S

2007-01-01

To determine the feasibility, acceptability, and reported impact of a nutrition and physical activity environmental intervention in child care. Self-assessment instrument completed pre- and post-intervention by randomly assigned intervention and comparison child care centers. Child care centers in 8 counties across North Carolina. A convenience sample of 19 child care centers (15 intervention and 4 comparison). Intervention centers completed the self-assessment instrument at baseline and then selected 3 environmental improvements to make over the 6-month intervention period with assistance from a trained NAP SACC Consultant. Changes in pre- and post-intervention self-assesment of the nutrition and physical activity child care environment with additional process measures to evaluate project implementation, feasibility and acceptability. Comparison of pre- and post-test scores for the intervention group using a Wilcoxon signed-rank test and descriptions of environmental changes. Intervention centers rated themselves higher at follow-up than at baseline, and relative to comparison centers, reported a variety of environmental nutrition and physical activity improvements confirmed by research staff. The NAP SACC pilot intervention shows promise as an approach to promote healthy weight environments in preschool settings. Additional evaluation of the project is needed using a greater number of centers and a more objective outcome measure.

Acceptability of health information technology aimed at environmental health education in a prenatal clinic

PubMed Central

Rosas, Lisa G; Trujillo, Celina; Camacho, Jose; Madrigal, Daniel; Bradman, Asa; Eskenazi, Brenda

2014-01-01

Objective To describe the acceptability of an interactive computer kiosk that provides environmental health education to low-income Latina prenatal patients. Methods A mixed-methods approach was used to assess the acceptability of the Prenatal Environmental Health Kiosk pregnant Latina women in Salinas, CA (n=152). The kiosk is a low literacy, interactive touch-screen computer program with an audio component and includes graphics and an interactive game. Results The majority had never used a kiosk before. Over 90% of women reported that they learned something new while using the kiosk. Prior to using the kiosk, 22% of women reported their preference of receiving health education from a kiosk over a pamphlet or video compared with 57% after using the kiosk (p<0.01). Qualitative data revealed: 1) benefit of exposure to computer use; 2) reinforcing strategy of health education; and 3) popularity of the interactive game. Conclusion The Prenatal Environmental Health Kiosk is an innovative patient health education modality that was shown to be acceptable among a population of low-income Latino pregnant women in a prenatal care clinic. Practice Implications This pilot study demonstrated that a health education kiosk was an acceptable strategy for providing Latina prenatal patients with information on pertinent environmental exposures. PMID:25085548

Acceptability of health information technology aimed at environmental health education in a prenatal clinic.

PubMed

Rosas, Lisa G; Trujillo, Celina; Camacho, Jose; Madrigal, Daniel; Bradman, Asa; Eskenazi, Brenda

2014-11-01

To describe the acceptability of an interactive computer kiosk that provides environmental health education to low-income Latina prenatal patients. A mixed-methods approach was used to assess the acceptability of the Prenatal Environmental Health Kiosk pregnant Latina women in Salinas, CA (n=152). The kiosk is a low literacy, interactive touch-screen computer program with an audio component and includes graphics and an interactive game. The majority had never used a kiosk before. Over 90% of women reported that they learned something new while using the kiosk. Prior to using the kiosk, 22% of women reported their preference of receiving health education from a kiosk over a pamphlet or video compared with 57% after using the kiosk (p<0.01). Qualitative data revealed: (1) benefit of exposure to computer use; (2) reinforcing strategy of health education; and (3) popularity of the interactive game. The Prenatal Environmental Health Kiosk is an innovative patient health education modality that was shown to be acceptable among a population of low-income Latino pregnant women in a prenatal care clinic. This pilot study demonstrated that a health education kiosk was an acceptable strategy for providing Latina prenatal patients with information on pertinent environmental exposures. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

[Identification of capacities in environmental health from environmental authorities in Colombia].

PubMed

Agudelo-Calderón, Carlos A; García-Ubaque, Juan C; Robledo-Martínez, Rocío; García-Ubaque, Cesar A; Vaca-Bohórquez, Martha L

2016-08-01

Objectives To diagnose the capabilities that environmental authorities and the Ministry of Environment and Sustainable Development have to assume their role in environmental health, based on the capacity model of the United Nations Program for Development UNDP. Method Document review, interviews on key issues and a commented survey were conducted. 84 entities were selected for a tailored survey; complete information was obtained from 76 institutions. Results The valuation of environment favorability was within the acceptable and unfavorable categories; knowledge management capabilities were found to be precarious and assessment of functional capabilities ranged between appropriate and acceptable. The assessment of specific capabilities had a rating of poor or barely acceptable. Conclusions Two major problems were found: a. The environmental authorities do not conceive or implement these capabilities based on the UNDP model but on the conventional model of the Ministry of Environment, Housing and Territorial Development; b. Environmental authorities show an incipient level of incorporation of environmental health policies in their field of action.

Towards environmentally sustainable human behaviour: targeting non-conscious and conscious processes for effective and acceptable policies

NASA Astrophysics Data System (ADS)

Marteau, Theresa M.

2017-05-01

Meeting climate change targets to limit global warming to 2°C requires rapid and large reductions in demand for products that most contribute to greenhouse gas (GHG) emissions. These include production of bulk materials (e.g. steel and cement), energy supply (e.g. fossil fuels) and animal source foods (particularly ruminants and their products). Effective strategies to meet these targets require transformative changes in supply as well as demand, involving changes in economic, political and legal systems at local, national and international levels, building on evidence from many disciplines. This paper outlines contributions from behavioural science in reducing demand. Grounded in dual-process models of human behaviour (involving non-conscious and conscious processes) this paper considers first why interventions aimed at changing population values towards the environment are usually insufficient or unnecessary for reducing demand although they may be important in increasing public acceptability of policies that could reduce demand. It then outlines two sets of evidence from behavioural science towards effective systems-based strategies, to identify interventions likely to be effective at: (i) reducing demand for products that contribute most to GHG emissions, mainly targeting non-conscious processes and (ii) increasing public acceptability for policy changes to enable these interventions, targeting conscious processes. This article is part of the themed issue 'Material demand reduction'.

Towards environmentally sustainable human behaviour: targeting non-conscious and conscious processes for effective and acceptable policies.

PubMed

Marteau, Theresa M

2017-06-13

Meeting climate change targets to limit global warming to 2°C requires rapid and large reductions in demand for products that most contribute to greenhouse gas (GHG) emissions. These include production of bulk materials (e.g. steel and cement), energy supply (e.g. fossil fuels) and animal source foods (particularly ruminants and their products). Effective strategies to meet these targets require transformative changes in supply as well as demand, involving changes in economic, political and legal systems at local, national and international levels, building on evidence from many disciplines. This paper outlines contributions from behavioural science in reducing demand. Grounded in dual-process models of human behaviour (involving non-conscious and conscious processes) this paper considers first why interventions aimed at changing population values towards the environment are usually insufficient or unnecessary for reducing demand although they may be important in increasing public acceptability of policies that could reduce demand. It then outlines two sets of evidence from behavioural science towards effective systems-based strategies, to identify interventions likely to be effective at: (i) reducing demand for products that contribute most to GHG emissions, mainly targeting non-conscious processes and (ii) increasing public acceptability for policy changes to enable these interventions, targeting conscious processes.This article is part of the themed issue 'Material demand reduction'. © 2017 The Authors.

Towards environmentally sustainable human behaviour: targeting non-conscious and conscious processes for effective and acceptable policies

PubMed Central

2017-01-01

Meeting climate change targets to limit global warming to 2°C requires rapid and large reductions in demand for products that most contribute to greenhouse gas (GHG) emissions. These include production of bulk materials (e.g. steel and cement), energy supply (e.g. fossil fuels) and animal source foods (particularly ruminants and their products). Effective strategies to meet these targets require transformative changes in supply as well as demand, involving changes in economic, political and legal systems at local, national and international levels, building on evidence from many disciplines. This paper outlines contributions from behavioural science in reducing demand. Grounded in dual-process models of human behaviour (involving non-conscious and conscious processes) this paper considers first why interventions aimed at changing population values towards the environment are usually insufficient or unnecessary for reducing demand although they may be important in increasing public acceptability of policies that could reduce demand. It then outlines two sets of evidence from behavioural science towards effective systems-based strategies, to identify interventions likely to be effective at: (i) reducing demand for products that contribute most to GHG emissions, mainly targeting non-conscious processes and (ii) increasing public acceptability for policy changes to enable these interventions, targeting conscious processes. This article is part of the themed issue ‘Material demand reduction’. PMID:28461435

Site Selection for the Disposal of LLW in Taiwan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chuang, W.S.; Chi, L.M.; Tien, N.C.

2006-07-01

This paper presents the implementation status of the low-level radioactive waste (LLW) disposal program in Taiwan, including the disposal facility regulations, status of waste management, final disposal program, licensing procedures, waste acceptance criteria, site selection criteria and processes and preliminary disposal concepts. The first phase of site selection for low-level radioactive waste final disposal in Taiwan was implemented between 1992 and 2002. The site selection process adopted a Geographic Information System (GIS), Hierarchical Analysis System, Expert Evaluation System, and site reconnaissance. An incentive program for voluntary sites was also initiated. After a series of evaluations and discussion of 30 potentialmore » candidate sites, including 8 recommended sites, 5 qualified voluntary townships, and several remote uninhabited small islets, Hsiao-chiou islet was selected as the first priority candidate site in February 1998. The geological investigation work in Hsiao-chiou was conducted from March 1999 through October 2000. An Environmental Impact Statement Report (EIS) and the Investment Feasibility Study Report (IFS) were submitted to the Environmental Protection Agency (EPA) in November 2000 and to the Ministry of Economic Affairs (MOEA) in June 2001, respectively. Unfortunately, the site investigation was discontinued in 2002 due to political and public acceptance consideration. After years of planning, the second phase of the site selection process was launched in August 2004 and will be conducted through 2008. It is planned that a repository will be constructed in early 2009 and start to operate in 2014. The site selection process for the second phase is based on the earlier work and four potential candidate sites were selected for evaluation until 2005. A near surface disposal concept is proposed for a site located in the Taiwan strait, and cavern disposal concepts are proposed for three other sites located on the main island. This paper presents the implementation status of the LLW disposal program in Taiwan, including the disposal facility regulations, status of waste management, final disposal program, licensing procedures, waste acceptance criteria, site selection criteria and processes, and preliminary disposal concepts 'NIMBY' (Not in my backyard) is a critical problem for implementation of the final disposal project. Resistance from local communities has been continuously received during site characterization. To overcome this, an incentive program to encourage community acceptance has been approved by the Government. Programs for community promotion are being proposed and negotiations are also underway. (authors)« less

Analytical methodology for determination of helicopter IFR precision approach requirements. [pilot workload and acceptance level

NASA Technical Reports Server (NTRS)

Phatak, A. V.

1980-01-01

A systematic analytical approach to the determination of helicopter IFR precision approach requirements is formulated. The approach is based upon the hypothesis that pilot acceptance level or opinion rating of a given system is inversely related to the degree of pilot involvement in the control task. A nonlinear simulation of the helicopter approach to landing task incorporating appropriate models for UH-1H aircraft, the environmental disturbances and the human pilot was developed as a tool for evaluating the pilot acceptance hypothesis. The simulated pilot model is generic in nature and includes analytical representation of the human information acquisition, processing, and control strategies. Simulation analyses in the flight director mode indicate that the pilot model used is reasonable. Results of the simulation are used to identify candidate pilot workload metrics and to test the well known performance-work-load relationship. A pilot acceptance analytical methodology is formulated as a basis for further investigation, development and validation.

Stakeholder involvement in agri-environmental policy making--learning from a local- and a state-level approach in Germany.

PubMed

Prager, Katrin; Freese, Jan

2009-02-01

Recent European regulations for rural development emphasise the requirement to involve stakeholder groups and other appropriate bodies in the policy-making process. This paper presents two cases involving stakeholder participation in agri-environmental development and policy making, targeted at different policy-making levels. One study was undertaken in Lower Saxony where a local partnership developed and tested an agri-environmental prescription, which was later included in the state's menu of agri-environmental schemes. In Sachsen-Anhalt, state-facilitated stakeholder workshops including a mathematical model were used to optimise the programme planning and budget allocation at the state level. Both studies aimed at improving the acceptance of agri-environmental schemes. The authors gauge the effectiveness of the two approaches and discuss what lessons can be learned. The experience suggests that the approaches can complement one another and could also be applied to rural policy making.

Using offsets to mitigate environmental impacts of major projects: A stakeholder analysis.

PubMed

Martin, Nigel; Evans, Megan; Rice, John; Lodhia, Sumit; Gibbons, Philip

2016-09-01

Global patterns of development suggest that as more projects are initiated, business will need to find acceptable measures to conserve biodiversity. The application of environmental offsets allows firms to combine their economic interests with the environment and society. This article presents the results of a multi-stakeholder analysis related to the design of offsets principles, policies, and regulatory processes, using a large infrastructure projects context. The results indicate that business was primarily interested in using direct offsets and other compensatory measures, known internationally as indirect offsets, to acquit their environmental management obligations. In contrast, the environmental sector argued that highly principled and scientifically robust offsets programs should be implemented and maintained for enduring environmental protection. Stakeholder consensus stressed the importance of offsets registers with commensurate monitoring and enforcement. Our findings provide instructive insights into the countervailing views of offsets policy stakeholders. Copyright © 2016 Elsevier Ltd. All rights reserved.

What do you need to know to get started with wood and fish waste composting?

Treesearch

Jessie A. Micales

2002-01-01

Mountains and mountains of sawdust, hog fuel and wood chips have been generated by wood-processing mills and accumulated in large mountains in the past. But because of today's environmental con-straints, simply accumulating waste in piles is no longer acceptable. Landfilling may not be an option because of high tipping fees and the high costs of transportation to...

Economic, Environmental and Moral Acceptance of Renewable Energy: A Case Study-The Agricultural Biogas Plant at Pěčín.

PubMed

Vochozka, Marek; Maroušková, Anna; Šuleř, Petr

2018-02-01

The production of renewable energy in agricultural biogas plants is being widely criticized because-among other things-most of the feedstock comes from purpose-grown crops like maize. These activities (generously subsidized in the Czech Republic) generate competitive pressure to other crops that are used for feeding or food production, worsening their affordability. Unique pretreatment technology that allows substitution of the purpose-grown crops by farming residues (such as husk or straw) was built 6 years ago on a commercial basis in Pěčín (Czech Republic) under modest funding and without publicity. The design of the concept; financial assessment and moral viewpoint were analyzed based on practical operating data. It showed that the apparatus improves economic, environmental and moral acceptance as well. However, according to the government's view, public funding for this type of processing was shortened, "because waste materials represent a lower cost". The impact of such governance was analyzed as well.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Illman, D.L.

Green chemistry is an effort to change the very concept of efficiency as it is applied to industrial chemical processes, shifting the balance from an exclusive focus on yield to one that places economic value on minimizing or eliminating wasteful by-products. Judging from a week-long symposium on Design for the Environment: A New Paradigm for the 21st Century co-sponsored by the Division of Environmental Chemistry and the Committee on Environmental Improvement of the Chemical Society of Washington, the green movement is one that is gaining momentum and acceptance. Presentations ranged from futuristic visions of nanotechnology-based chemical manufacturing to prescriptions formore » reducing waste in today's chemical processes. Some schemes are still the stuff of dreams, while others have already been implemented. This paper summarizes the contents of this symposium.« less

Hydroponic phytoremediation of heavy metals and radionuclides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hartong, J.; Szpak, J.; Hamric, T.

1998-07-01

It is estimated that the Departments of Defense, Energy, and Agriculture will spend up to 300 billion federal dollars on environmental remediation during the next century. Current remediation processes can be expensive, non-aesthetic, and non-versatile. Therefore, the need exists for more innovative and cost effective solutions. Phytoremediation, the use of vegetation for the remediation of contaminated sediments, soils, and ground water, is an emerging technology for treating several categories of persistent, toxic contaminants. Although effective, phytoremediation is still in a developmental stage, and therefore is not a widely accepted technology by regulatory agencies and public groups. Research is currently beingmore » conducted to validate the processes effectiveness as well as increase regulatory and community acceptance. This research will focus on the ability of plants to treat an aquifer contaminated with heavy metals and radionuclides. Specifically, the effectiveness of hydroponically grown dwarf sunflowers and mustard seed will be investigated.« less

Sustainability Characterization for Additive Manufacturing.

PubMed

Mani, Mahesh; Lyons, Kevin W; Gupta, S K

2014-01-01

Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

A study of the efficiency of hydrogen liquefaction. [jet aircraft applications

NASA Technical Reports Server (NTRS)

Baker, C. R.; Shaner, R. L.

1976-01-01

The search for an environmentally acceptable fuel to eventually replace petroleum-based fuels for long-range jet aircraft has singled out liquid hydrogen as an outstanding candidate. Hydrogen liquefaction is discussed, along with the effect of several operating parameters on process efficiency. A feasible large-scale commercial hydrogen liquefaction facility based on the results of the efficiency study is described. Potential future improvements in hydrogen liquefaction are noted.

Development of a pest risk analysis for Phytophthora ramorum for the European Union; the key deliverable from the EU-Funded project RAPRA

Treesearch

Claire Sansford; Alan Inman; Joan Webber

2010-01-01

Pest Risk Analysis (PRA) is an internationally recognized, structured process of determining whether plant pests and pathogens that are absent from a country or area could enter, establish, and cause an economic or environmental risk that is deemed unacceptable. PRA is also used to help identify phytosanitary measures to reduce risks to an acceptable level. United...

Successfully performing a university student's role despite disabilities: challenges of an inclusive environment and appropriate task modification.

PubMed

Rochette, Annie; Loiselle, Frederic

2012-01-01

To reflect on what it means to successfully perform a university student's role despite the presence of impairments. The Disability Creation Process (DCP) model is used as a tool to zoom in the different activities and tasks required for a successful education as well as to describe how the social and physical environment can be as inclusive as possible to compensate for different impairments. One activity in the student's role (reading) is used to illustrate and reflect on potential challenges in compensating for impairments by way of environmental or task modifications. The student's role is a complex one, characterized by different actions such as getting admitted, moving around, attending courses, studying and participating in student life. Environmental factors or time can facilitate or impede the level of participation in the education domain. One challenge may be to differentiate between compensation for learning (processes) as compared to outcomes (competency level for future employment) as well as to determine how much assistance is acceptable. Intuitive single-case analysis should be replaced by a systematic analysis relying on a conceptual model such as the DCP. To avoid discrimination and to ensure transparency, acceptable amount of compensation for an activity should be defined.

Possible environmental effects of increased coal use in California

NASA Technical Reports Server (NTRS)

Carey, D. L.

1978-01-01

If coal is to be utilized in California it must be made compatible with the state's drive toward restoring environmental quality. The impacts resulting from coal's mining and transportation, or from water consumption, water quality degradation and electric transmission line routing can probably be adequately mitigated through strong and early planning efforts, the use of improved control and process technologies, and sincere utility commitment. The socioeconomic impacts may prove somewhat more difficult to satisfactorily mitigate. Of greatest concern is adequate control of generated air pollutants and disposal of solid and liquid wastes since acceptable technologies or handling techniques have yet to be conclusively demonstrated.

ASTRYD: A new numerical tool for aircraft cabin and environmental noise prediction

NASA Astrophysics Data System (ADS)

Berhault, J.-P.; Venet, G.; Clerc, C.

ASTRYD is an analytical tool, developed originally for underwater applications, that computes acoustic pressure distribution around three-dimensional bodies in closed spaces like aircraft cabins. The program accepts data from measurements or other simulations, processes them in the time domain, and delivers temporal evolutions of the acoustic pressures and accelerations, as well as the radiated/diffracted pressure at arbitrary points located in the external/internal space. A typical aerospace application is prediction of acoustic load on satellites during the launching phase. An aeronautic application is engine noise distribution on a business jet body for prediction of environmental and cabin noise.

From single-substance evaluation to ecological process concept: the dilemma of processing gold with cyanide.

PubMed

Korte, F; Coulston, F

1995-10-01

In the past decades, limit concentration values for environmentally dangerous synthetic and natural chemical substances have been established in industrialized countries. Depending on the range of application, state of aggregation, propagation velocity, specific action on living organisms, long- or short-time effect, etc., different terms are used to specify these limit concentrations (acceptable daily intakes, TLV, LD50, emission values, water quality standards, etc.). Several parameters (e.g., range of application, ethic and social valuation, environmental factors, scientific knowledge) have led to nationally and internationally varying values depending on the region and time. The accuracy of this system of evaluation cannot necessarily be improved by listing further analytical data, but rather by furnishing sufficiently secured scientific data for a serious discussion, with the public concepts influenced more and more by the mass media. The best-established scientific knowledge has been acquired by the chemical industry. National and international groups demand that ecological-chemical problems in other fields of industry be dealt with as well; this research should, without doubt, be intensified. The example of the mining industry, which must employ chemical methods to isolate small concentrations (ppm), demonstrates the environmental conflict caused by the increasing world population, requiring the adaptation of the process by industry to the modern environmental concept. This is illustrated by the evolution of the gold recovery process.

Impact of the Diamond Light Source on research in Earth and environmental sciences: current work and future perspectives

PubMed Central

Burke, Ian T.; Mosselmans, J. Frederick W.; Shaw, Samuel; Peacock, Caroline L.; Benning, Liane G.; Coker, Victoria S.

2015-01-01

Diamond Light Source Ltd celebrated its 10th anniversary as a company in December 2012 and has now accepted user experiments for over 5 years. This paper describes the current facilities available at Diamond and future developments that enhance its capacities with respect to the Earth and environmental sciences. A review of relevant research conducted at Diamond thus far is provided. This highlights how synchrotron-based studies have brought about important advances in our understanding of the fundamental parameters controlling highly complex mineral–fluid–microbe interface reactions in the natural environment. This new knowledge not only enhances our understanding of global biogeochemical processes, but also provides the opportunity for interventions to be designed for environmental remediation and beneficial use. PMID:25624516

Process for removing polychlorinated and polybrominated biphenyls from oils

DOEpatents

Orlett, M.J.

The invention is a relatively simple and inexpensive process for detoxifying oils contaminated with PCBs and/or PBBs. The process is especially suitable for processing lubricating oils containing such contaminants. In one aspect of the invention, the contaminated lubricating oil is contacted with a particulate reagent comprising adsorbent particles carrying a dispersion of metallic sodium. The solid sodium reagent converts the PCB and/or PBB contaminants to environmentally acceptable products and also converts various sodium-reactive additives normally present in lubricating oil to reaction products. The adsorbent reagent retains most of the products and is easily separated from the detoxified oil. The detoxified oil may be fortified with various additives functionally equivalent to those removed during detoxification.

An operational application of ERTS-1 imagery to the environmental inventory process. [environmental impact statement for Atchafalaya basin of Louisiana and Mississippi

NASA Technical Reports Server (NTRS)

Oneal, J. D.; Bwins, J. R.

1974-01-01

A discussion is presented of how The Engineer Agency for Resources Inventories utilized ERTS remotely sensed imagery as a/supplement to airphotos and collateral data for an environmental impact study of the Atchafalaya Basin for the New Orleans engineer district. This single overall inventory permitted a systematic approach and substantial economy for a number of engineering projects for which environmental impact statements would be required. The study area covered approximately 25,000 square miles and included all or part of 36 parishes in Louisiana and 8 counties in Mississippi. It was concluded that as a supplementary source, used in conjunction with airphotos, ERTS had proven itself as a significant means of economy. As a primary source, the Engineer Agency is not yet ready to accept ERTS for their own particular applications.

Rapid evolution in insect pests: the importance of space and time in population genomics studies.

PubMed

Pélissié, Benjamin; Crossley, Michael S; Cohen, Zachary Paul; Schoville, Sean D

2018-04-01

Pest species in agroecosystems often exhibit patterns of rapid evolution to environmental and human-imposed selection pressures. Although the role of adaptive processes is well accepted, few insect pests have been studied in detail and most research has focused on selection at insecticide resistance candidate genes. Emerging genomic datasets provide opportunities to detect and quantify selection in insect pest populations, and address long-standing questions about mechanisms underlying rapid evolutionary change. We examine the strengths of recent studies that stratify population samples both in space (along environmental gradients and comparing ancestral vs. derived populations) and in time (using chronological sampling, museum specimens and comparative phylogenomics), resulting in critical insights on evolutionary processes, and providing new directions for studying pests in agroecosystems. Copyright © 2018 Elsevier Inc. All rights reserved.

Quantifying the measurement uncertainty of results from environmental analytical methods.

PubMed

Moser, J; Wegscheider, W; Sperka-Gottlieb, C

2001-07-01

The Eurachem-CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.

77 FR 21551 - New York City Department of Environmental Protection; Notice of Application Accepted for filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13287-004] New York City Department of Environmental Protection; Notice of Application Accepted for filing And Soliciting Motions To Intervene and Protests Take notice that the following hydroelectric application has been filed with the Commission and is available for public...

Environmental Communications Today: An Educator's Perspective.

ERIC Educational Resources Information Center

Schoenfeld, Clay

1979-01-01

The article traces the origins of environmental communications and focuses on several categories of environmental communication. It specifies the common denominators of the various forms of environmental communications. An appendix of journals that accept freelance environmental articles is included. (RE)

Cultured meat: every village its own factory?

PubMed

van der Weele, Cor; Tramper, Johannes

2014-06-01

Rising global demand for meat will result in increased environmental pollution, energy consumption, and animal suffering. Cultured meat, produced in an animal-cell cultivation process, is a technically feasible alternative lacking these disadvantages, provided that an animal-component-free growth medium can be developed. Small-scale production looks particularly promising, not only technologically but also for societal acceptance. Economic feasibility, however, emerges as the real obstacle. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ethical Dilemmas in Protecting Susceptible Subpopulations From Environmental Health Risks: Liberty, Utility, Fairness, and Accountability for Reasonableness

PubMed Central

Resnik, David B.; MacDougall, D. Robert; Smith, Elise M.

2018-01-01

Various U.S. laws, such as the Clean Air Act and the Food Quality Protection Act, require additional protections for susceptible subpopulations who face greater environmental health risks. The main ethical rationale for providing these protections is to ensure that environmental health risks are distributed fairly. In this article, we (1) consider how several influential theories of justice deal with issues related to the distribution of environmental health risks; (2) show that these theories often fail to provide specific guidance concerning policy choices; and (3) argue that an approach to public decision making known as accountability for reasonableness can complement theories of justice in establishing acceptable environmental health risks for the general population and susceptible subpopulations. Since accountability for reasonableness focuses on the fairness of the decision-making process, not the outcome, it does not guarantee that susceptible subpopulations will receive a maximum level of protection, regardless of costs or other morally relevant considerations. PMID:29466133

Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

PubMed Central

Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

2013-01-01

Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on. PMID:23603866

Integrated environmental risk assessment and whole-process management system in chemical industry parks.

PubMed

Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

2013-04-19

Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

Lightweight Combat Vehicle S and T Campaign

DTIC Science & Technology

2014-10-06

research in nano-materials, self - healing /diagnosing materials, multi-functional materials, and environmentally acceptable materials. The application...research includes nano-materials, self - healing /diagnosing materials, multi-functional materials, and environmentally acceptable materials.5 The 2003...hubs must be led by a not-for-profit organization, provide 50% cost share match, and are expected to become self -sufficient in 5 years. So far, all

Cognitive constraints on high school students' representations of real environmental problems

NASA Astrophysics Data System (ADS)

Barnes, Ervin Kenneth

One class of juniors and seniors was studied through one semester in the investigation of how students think about, learn from, and solve real environmental problems. The intention was to listen to student voices while researching the features of their representations of these problems, the beliefs they held (tenets), the cognitive processes they employed, and the principles of science, ecology, problem solving, and ethics they held as tenets. The focus was upon two self-selected groups as they perceived, engaged, analyzed, and proposed solutions for problems. Analysis of the student representations involved interpretation of the features to include both the perspective tenets and the envisioning processes. These processes included the intentive and attentive constraints as tenet acquisition and volitive and agential constraints as tenet affirmation. The perspective tenets included a variety of conceptual (basic science, ecological, ethical, and problem-solving) constraints as well as ontological, epistemological, and other cultural (role, status, power, and community) constraints. The perspective tenets were interpreted thematically including the ways populations of people cause and care about environmental problems, the magnitude of environmental problems and the science involved, the expectations and limitations students perceive for themselves, and the importance of community awareness and cooperation to addressing these problems. Some of these tenets were interpreted to be principles in that they were rules that were accepted by some people as true. The perspective tenets, along with the envisioning processes, were perceived to be the constraints that determined the environmental problems and limited the solution possibilities. The students thought about environmental problems in mature and principled ways using a repertoire of cognitive processes. They learned from them as they acquired and affirmed tenets. They solved them through personal choices and efforts to increase community awareness. The ways students think about, learn from, and solve real environmental problems were all constrained by the perspective tenets (including cultural tenets of role, status, and power) and envisioning processes. It was concluded that students need help from the community to go further in solving these real environmental problems.

Food waste conversion options in Singapore: environmental impacts based on an LCA perspective.

PubMed

Khoo, Hsien H; Lim, Teik Z; Tan, Reginald B H

2010-02-15

Proper management and recycling of huge volumes of food waste is one of the challenges faced by Singapore. Semakau island - the only offshore landfill of the nation - only accepts inert, inorganic solid waste and therefore a large bulk of food waste is directed to incinerators. A remaining small percent is sent for recycling via anaerobic digestion (AD), followed by composting of the digestate material. This article investigates the environmental performance of four food waste conversion scenarios - based on a life cycle assessment perspective - taking into account air emissions, useful energy from the incinerators and AD process, as well as carbon dioxide mitigation from the compost products derived from the digestate material and a proposed aerobic composting system. The life cycle impact results were generated for global warming, acidification, eutrophication, photochemical oxidation and energy use. The total normalized results showed that a small-scale proposed aerobic composting system is more environmentally favorable than incinerators, but less ideal compared to the AD process. By making full use of the AD's Recycling Phase II process alone, the Singapore Green Plan's 2012 aim to increase the recycling of food waste to 30% can easily be achieved, along with reduced global warming impacts.

Environmental assessment in health care organizations.

PubMed

Romero, Isabel; Carnero, María Carmen

2017-12-22

The aim of this research is to design a multi-criteria model for environmental assessment of health care organizations. This is a model which guarantees the objectivity of the results obtained, is easy to apply, and incorporates a series of criteria, and their corresponding descriptors, relevant to the internal environmental auditing processes of the hospital. Furthermore, judgments were given by three experts from the areas of health, the environment, and multi-criteria decision techniques. From the values assigned, geometric means were calculated, giving weightings for the criteria of the model. This innovative model is intended for application within a continuous improvement process. A practical case from a Spanish hospital is included at the end. Information contained in the sustainability report provided the data needed to apply the model. The example contains all the criteria previously defined in the model. The results obtained show that the best-satisfied criteria are those related to energy consumption, generation of hazardous waste, legal matters, environmental sensitivity of staff, patients and others, and the environmental management of suppliers. On the other hand, those areas returning poor results are control of atmospheric emissions, increase in consumption of renewable energies, and the logistics of waste produced. It is recommended that steps be taken to correct these deficiencies, thus leading to an acceptable increase in the sustainability of the hospital.

Low Temperature Soda-Oxygen Pulping of Bagasse.

PubMed

Yue, Fengxia; Chen, Ke-Li; Lu, Fachuang

2016-01-13

Wood shortages, environmental pollution and high energy consumption remain major obstacles hindering the development of today's pulp and paper industry. Energy-saving and environmental friendly pulping processes are still needed, especially for non-woody materials. In this study, soda-oxygen pulping of bagasse was investigated and a successful soda-oxygen pulping process for bagasse at 100 °C was established. The pulping parameters of choice were under active alkali charge of 23%, maximum cooking temperature 100 °C, time hold at maximum temperature 180 min, initial pressure of oxygen 0.6 MPa, MgSO4 charge 0.5%, and de-pithed bagasse consistency 12%. Properties of the resultant pulp were screened yield 60.9%, Kappa number 14, viscosity 766 dm³/kg, and brightness 63.7% ISO. Similar pulps were also obtained at 110 °C or 105 °C with a cooking time of 90 min. Compared with pulps obtained at higher temperatures (115-125 °C), this pulp had higher screened yield, brightness, and acceptable viscosity, while the delignification degree was moderate. These results indicated that soda-oxygen pulping at 100 °C, the lowest cooking temperature reported so far for soda-oxygen pulping, is a suitable process for making chemical pulp from bagasse. Pulping at lower temperature and using oxygen make it an environmental friendly and energy-saving pulping process.

Consensus statement understanding health and malnutrition through a systems approach: the ENOUGH program for early life.

PubMed

Kaput, Jim; van Ommen, Ben; Kremer, Bas; Priami, Corrado; Monteiro, Jacqueline Pontes; Morine, Melissa; Pepping, Fre; Diaz, Zoey; Fenech, Michael; He, Yiwu; Albers, Ruud; Drevon, Christian A; Evelo, Chris T; Hancock, Robert E W; Ijsselmuiden, Carel; Lumey, L H; Minihane, Anne-Marie; Muller, Michael; Murgia, Chiara; Radonjic, Marijana; Sobral, Bruno; West, Keith P

2014-01-01

Nutrition research, like most biomedical disciplines, adopted and often uses experimental approaches based on Beadle and Tatum's one gene-one polypeptide hypothesis, thereby reducing biological processes to single reactions or pathways. Systems thinking is needed to understand the complexity of health and disease processes requiring measurements of physiological processes, as well as environmental and social factors, which may alter the expression of genetic information. Analysis of physiological processes with omics technologies to assess systems' responses has only become available over the past decade and remains costly. Studies of environmental and social conditions known to alter health are often not connected to biomedical research. While these facts are widely accepted, developing and conducting comprehensive research programs for health are often beyond financial and human resources of single research groups. We propose a new research program on essential nutrients for optimal underpinning of growth and health (ENOUGH) that will use systems approaches with more comprehensive measurements and biostatistical analysis of the many biological and environmental factors that influence undernutrition. Creating a knowledge base for nutrition and health is a necessary first step toward developing solutions targeted to different populations in diverse social and physical environments for the two billion undernourished people in developed and developing economies.

SEA - Enhancing communication for better environmental decisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vicente, Gustavo; Partidario, Maria R.

Over the years SEA has been subjected to several interpretations, often resulting from different views on democratic processes and social considerations in decision-making. More than strictly a technical tool, as in its original form, SEA has the potential to act as a mediating instrument, bridging problem perceptions with technical solutions, steering the assessment to facilitate the integration of environmental values into decision-making processes, influencing decision-makers' capacity of acceptance. This paper explores the potential of SEA to enhance communication between different stakeholders, enabling discussion and agreement independently of different beliefs, convictions, social roles, values, accumulated experiences, individual needs, or any othermore » factors, that express different world visions and determine the context within which decisions are taken. To face up to this challenge the authors suggest the establishment of communication strategies that enhance the role of SEA in the construction of social expectations and platforms of discussion, in the multiple negotiation processes that take place between stakeholders and decision-makers.« less

Data Quality Objectives Process for Designation of K Basins Debris

DOE Office of Scientific and Technical Information (OSTI.GOV)

WESTCOTT, J.L.

2000-05-22

The U.S. Department of Energy has developed a schedule and approach for the removal of spent fuels, sludge, and debris from the K East (KE) and K West (KW) Basins, located in the 100 Area at the Hanford Site. The project that is the subject of this data quality objective (DQO) process is focused on the removal of debris from the K Basins and onsite disposal of the debris at the Environmental Restoration Disposal Facility (ERDF). This material previously has been dispositioned at the Hanford Low-Level Burial Grounds (LLBGs) or Central Waste Complex (CWC). The goal of this DQO processmore » and the resulting Sampling and Analysis Plan (SAP) is to provide the strategy for characterizing and designating the K-Basin debris to determine if it meets the Environmental Restoration Disposal Facility Waste Acceptance Criteria (WAC), Revision 3 (BHI 1998). A critical part of the DQO process is to agree on regulatory and WAC interpretation, to support preparation of the DQO workbook and SAP.« less

The Effects of Dynamical Rates on Species Coexistence in a Variable Environment: The Paradox of the Plankton Revisited.

PubMed

Li, Lina; Chesson, Peter

2016-08-01

Hutchinson's famous hypothesis for the "paradox of the plankton" has been widely accepted, but critical aspects have remained unchallenged. Hutchinson argued that environmental fluctuations would promote coexistence when the timescale for environmental change is comparable to the timescale for competitive exclusion. Using a consumer-resource model, we do find that timescales of processes are important. However, it is not the time to exclusion that must be compared with the time for environmental change but the time for resource depletion. Fast resource depletion, when resource consumption is favored for different species at different times, strongly promotes coexistence. The time for exclusion is independent of the rate of resource depletion. Therefore, the widely believed predictions of Hutchinson are misleading. Fast resource depletion, as determined by environmental conditions, ensures strong coupling of environmental processes and competition, which leads to enhancement over time of intraspecific competition relative to interspecific competition as environmental shifts favor different species at different times. This critical coupling is measured by the covariance between environment and competition. Changes in this quantity as densities change determine the stability of coexistence and provide the key to rigorous analysis, both theoretically and empirically, of coexistence in a variable environment. These ideas apply broadly to diversity maintenance in variable environments whether the issue is species diversity or genetic diversity and competition or apparent competition.

76 FR 21877 - Environmental Management Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of call for nominations for appointment to the Environmental Management Advisory Board. SUMMARY... Environmental Management Advisory Board. DATES: Nominations will be accepted through May 13, 2011. ADDRESSES...

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 2, Battery recycling and disposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corbus, D

1992-09-01

Recycling and disposal of spent sodium-sulfur (Na/S) batteries are important issues that must be addressed as part of the commercialization process of Na/S battery-powered electric vehicles. The use of Na/S batteries in electric vehicles will result in significant environmental benefits, and the disposal of spent batteries should not detract from those benefits. In the United States, waste disposal is regulated under the Resource Conservation and Recovery Act (RCRA). Understanding these regulations will help in selecting recycling and disposal processes for Na/S batteries that are environmentally acceptable and cost effective. Treatment processes for spent Na/S battery wastes are in the beginningmore » stages of development, so a final evaluation of the impact of RCRA regulations on these treatment processes is not possible. The objectives of tills report on battery recycling and disposal are as follows: Provide an overview of RCRA regulations and requirements as they apply to Na/S battery recycling and disposal so that battery developers can understand what is required of them to comply with these regulations; Analyze existing RCRA regulations for recycling and disposal and anticipated trends in these regulations and perform a preliminary regulatory analysis for potential battery disposal and recycling processes. This report assumes that long-term Na/S battery disposal processes will be capable of handling large quantities of spent batteries. The term disposal includes treatment processes that may incorporate recycling of battery constituents. The environmental regulations analyzed in this report are limited to US regulations. This report gives an overview of RCRA and discusses RCRA regulations governing Na/S battery disposal and a preliminary regulatory analysis for Na/S battery disposal.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haney, Thomas Jay

This report documents the Data Quality Objectives (DQOs) developed for the Idaho National Laboratory (INL) Site ambient air surveillance program. The development of the DQOs was based on the seven-step process recommended “for systematic planning to generate performance and acceptance criteria for collecting environmental data” (EPA 2006). The process helped to determine the type, quantity, and quality of data needed to meet current regulatory requirements and to follow U.S. Department of Energy guidance for environmental surveillance air monitoring design. It also considered the current air monitoring program that has existed at INL Site since the 1950s. The development of themore » DQOs involved the application of the atmospheric dispersion model CALPUFF to identify likely contamination dispersion patterns at and around the INL Site using site-specific meteorological data. Model simulations were used to quantitatively assess the probable frequency of detection of airborne radionuclides released by INL Site facilities using existing and proposed air monitors.« less

Process for coal liquefaction in staged dissolvers

DOEpatents

Roberts, George W.; Givens, Edwin N.; Skinner, Ronald W.

1983-01-01

There is described an improved liquefaction process by which coal is converted to a low ash and low sulfur carbonaceous material that can be used as a fuel in an environmentally acceptable manner without costly gas scrubbing equipment. In the process, coal is slurried with a pasting oil, passed through a preheater and at least two dissolvers in series in the presence of hydrogen-rich gases at elevated temperatures and pressures. Solids, including mineral ash and unconverted coal macerals, are separated from the condensed reactor effluent. In accordance with the improved process, the first dissolver is operated at a higher temperature than the second dissolver. This temperature sequence produces improved product selectivity and permits the incorporation of sufficient hydrogen in the solvent for adequate recycle operations.

Modelling with stakeholders - Next generation

USGS Publications Warehouse

Voinov, Alexey; Kolagani, Nagesh; McCall, Michael K; Glynn, Pierre D.; Kragt, Marit E; Ostermann, Frank O; Pierce, Suzanne A; Ramu, Palaniappan

2016-01-01

This paper updates and builds on ‘Modelling with Stakeholders’ Voinov and Bousquet, 2010 which demonstrated the importance of, and demand for, stakeholder participation in resource and environmental modelling. This position paper returns to the concepts of that publication and reviews the progress made since 2010. A new development is the wide introduction and acceptance of social media and web applications, which dramatically changes the context and scale of stakeholder interactions and participation. Technology advances make it easier to incorporate information in interactive formats via visualization and games to augment participatory experiences. Citizens as stakeholders are increasingly demanding to be engaged in planning decisions that affect them and their communities, at scales from local to global. How people interact with and access models and data is rapidly evolving. In turn, this requires changes in how models are built, packaged, and disseminated: citizens are less in awe of experts and external authorities, and they are increasingly aware of their own capabilities to provide inputs to planning processes, including models. The continued acceleration of environmental degradation and natural resource depletion accompanies these societal changes, even as there is a growing acceptance of the need to transition to alternative, possibly very different, life styles. Substantive transitions cannot occur without significant changes in human behaviour and perceptions. The important and diverse roles that models can play in guiding human behaviour, and in disseminating and increasing societal knowledge, are a feature of stakeholder processes today.

Sustainability Characterization for Additive Manufacturing

PubMed Central

Mani, Mahesh; Lyons, Kevin W; Gupta, SK

2014-01-01

Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

Incorporating geoethics into environmental engineering lectures - three years of experience from international students visiting Iceland

NASA Astrophysics Data System (ADS)

Finger, David C.

2017-04-01

Never before has human kind been facing bigger environmental challenges than today. The challenges are overwhelming: growing human population, increasing ecological footprints, accelerated climate change, severe soil degradation, eutrophication of vital fresh water resources, acidification of oceans, health threatening air pollution and rapid biodiversity loss, to name just a few. It is the task of environmental scientists to transmit established knowledge on these complex and interdisciplinary challenges while demonstrating that management and engineering solutions exist to meet these threats. In this presentation I will outline the concept of my environmental impact (EI) assessment course, where prospective engineering students can select a topic of their choice, assess the environmental impacts, discuss with relevant stakeholders and come up with innovative solutions. The course is structured in three parts: i) lecturing of theoretical methods frequently used within the EI assessment process, ii) interaction with local businesses to acquire first-hand experience and iii) hands on training by writing an EI statement on a selected topic (see link below). Over the course of three years over 70 prospective engineering students from all over the world have not only acquired environmental system understanding, but also enhanced their awareness and developed potential solutions to mitigate, compensate and reverse the persistent environmental challenges. Most importantly, during this process all involved stakeholders (students, teachers, industry partners, governmental bodies and NGO partners) will hopefully develop a mutual understanding of the above mentioned environmental challenges and engage in an open and constructive dialogue necessary to generate acceptable solutions. Link to student projects from previous years: https://fingerd.jimdo.com/teaching/courses/environmental-impact-assessment/

Speciation of metal(loid)s in environmental samples by X-ray absorption spectroscopy: a critical review.

PubMed

Gräfe, Markus; Donner, Erica; Collins, Richard N; Lombi, Enzo

2014-04-25

Element specificity is one of the key factors underlying the widespread use and acceptance of X-ray absorption spectroscopy (XAS) as a research tool in the environmental and geo-sciences. Independent of physical state (solid, liquid, gas), XAS analyses of metal(loid)s in complex environmental matrices over the past two decades have provided important information about speciation at environmentally relevant interfaces (e.g. solid-liquid) as well as in different media: plant tissues, rhizosphere, soils, sediments, ores, mineral process tailings, etc. Limited sample preparation requirements, the concomitant ability to preserve original physical and chemical states, and independence from crystallinity add to the advantages of using XAS in environmental investigations. Interpretations of XAS data are founded on sound physical and statistical models that can be applied to spectra of reference materials and mixed phases, respectively. For spectra collected directly from environmental matrices, abstract factor analysis and linear combination fitting provide the means to ascertain chemical, bonding, and crystalline states, and to extract quantitative information about their distribution within the data set. Through advances in optics, detectors, and data processing, X-ray fluorescence microprobes capable of focusing X-rays to micro- and nano-meter size have become competitive research venues for resolving the complexity of environmental samples at their inherent scale. The application of μ-XANES imaging, a new combinatorial approach of X-ray fluorescence spectrometry and XANES spectroscopy at the micron scale, is one of the latest technological advances allowing for lateral resolution of chemical states over wide areas due to vastly improved data processing and detector technology. Copyright © 2014. Published by Elsevier B.V.

Thirty years of North American wind energy acceptance research: What have we learned?

DOE PAGES

Rand, Joseph; Hoen, Ben

2017-05-25

Thirty years of North American research on public acceptance of wind energy has produced important insights, yet knowledge gaps remain. This review synthesizes the literature, revealing the following lessons learned. (1) North American support for wind has been consistently high. (2) The NIMBY explanation for resistance to wind development is invalid. (3) Socioeconomic impacts of wind development are strongly tied to acceptance. (4) Sound and visual impacts of wind facilities are strongly tied to annoyance and opposition, and ignoring these concerns can exacerbate conflict. (5) Environmental concerns matter, though less than other factors, and these concerns can both help andmore » hinder wind development. (6) Issues of fairness, participation, and trust during the development process influence acceptance. (7) Distance from turbines affects other explanatory variables, but alone its influence is unclear. (8) Viewing opposition as something to be overcome prevents meaningful understandings and implementation of best practices. (9) Implementation of research findings into practice has been limited. The paper also identifies areas for future research on wind acceptance. With continued research efforts and a commitment toward implementing research findings into developer and policymaker practice, conflict and perceived injustices around proposed and existing wind energy facilities might be significantly lessened.« less

Thirty years of North American wind energy acceptance research: What have we learned?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rand, Joseph; Hoen, Ben

Thirty years of North American research on public acceptance of wind energy has produced important insights, yet knowledge gaps remain. This review synthesizes the literature, revealing the following lessons learned. (1) North American support for wind has been consistently high. (2) The NIMBY explanation for resistance to wind development is invalid. (3) Socioeconomic impacts of wind development are strongly tied to acceptance. (4) Sound and visual impacts of wind facilities are strongly tied to annoyance and opposition, and ignoring these concerns can exacerbate conflict. (5) Environmental concerns matter, though less than other factors, and these concerns can both help andmore » hinder wind development. (6) Issues of fairness, participation, and trust during the development process influence acceptance. (7) Distance from turbines affects other explanatory variables, but alone its influence is unclear. (8) Viewing opposition as something to be overcome prevents meaningful understandings and implementation of best practices. (9) Implementation of research findings into practice has been limited. The paper also identifies areas for future research on wind acceptance. With continued research efforts and a commitment toward implementing research findings into developer and policymaker practice, conflict and perceived injustices around proposed and existing wind energy facilities might be significantly lessened.« less

77 FR 15091 - Environmental Management Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of Solicitation of Nominations for Appointment as a member of the Environmental Management... Environmental Management Advisory Board (EMAB). DATES: The deadline for nominations for members will be accepted...

Environmental health impact in the hospital laundry.

PubMed

Byrns, G E; Bland, L A

1980-01-01

The task of surveying the hospital laundry is often dismissed by public health officials as unnecessary because the laundry cycle is generally considered to be capable of destroying all pathogens. Even though a properly operated laundry can produce a relatively bacteria free product, there are a number of variables that have an impact on the bacterial quality of the linen before it reaches the patient. It is vital that surveillance personnel understand these factors during processing, transporting, or sorting linen so that the final product is aesthetically, chemically, and bacteriologically acceptable for patient use. At the U. S. Public Health Service Hospital laundry in New Orleans, surveillance by the Environmental Health Department has identified potential problem areas. Operational improvements have been instituted at this laundry that would not have been possible without a thorough understanding of the laundry cycle. The authors describe the laundry cycle, including potential problem areas; identify useful microbial and chemical surveillance methods; and discuss process control procedures. This information will help the environmental health worker in discussions with laundry personnel regarding contamination control and operational efficiency.

Phytoremediation of explosives (TNT, RDX, HMX) by wild-type and transgenic plants.

PubMed

Panz, Katarzyna; Miksch, Korneliusz

2012-12-30

The large-scale production and processing of munitions has led to vast environmental pollution by the compounds TNT(2,4,6-trinitrotoluene), RDX(hexahydro-1,3,5-trinitro-1,3,5-triazine) and HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine). Explosives contain these toxic and mutagenic xenobiotics, which are stable in the environment and recalcitrant to remediation. Certain technologies used thus far (incineration, adsorption, advanced oxidations processes, chemical reduction etc.) have not only been very expensive but also caused additional environmental problems. During recent decades, the most popular technologies have been biotechnological methods, such as phytoremediation, which is relatively cheap, environmentally friendly, and a highly accepted solution by society. The most promising of these technologies is the usage of genetically modified plants, which combines the ability of bacterial genes to detoxify compounds with the phytoremediation benefits of plants. This paper is a review related to the latest and most important achievements in the field of phytoremediation of water and soil contaminated with TNT, RDX and HMX. Copyright © 2012 Elsevier Ltd. All rights reserved.

Acceptance test report (MI-74067-009-00). SVWS access arm (Serial number AA-09-03) (drawing 75M08129-13)

NASA Technical Reports Server (NTRS)

Hagood, J. T.

1973-01-01

Acceptance tests were conducted at Kennedy Space Center of the Saturn Vehicle Workshop Spacecraft Access Arm and related equipment. The tests were conducted to prove complete system capability to operate satisfactorily under conditions required to support spacecraft operations and activities. The SVWS Access Arm, serial number AA-09-03, is a Command Module Service Arm, S/A 9, which was removed from the mobile launcher and modified to support the SVWS operations. The C/M environmental chamber was removed and a completely new chamber was installed. The retract system was redesigned to remove the automatic/remote control capability and replaced with a local manual control. The SVWS Access Arm System was successfully tested and supported spacecraft processing without major problems.

The Effects of Sequential Environmental and Harvest Stressors on the Sensory Characteristics of Cultured Channel Catfish (Ictalurus Punctatus) Fillets.

PubMed

Ciaramella, Michael A; Kim, Taejo; Avery, Jimmy L; Allen, Peter J; Schilling, M Wes

2016-08-01

Stress during fish culture alters physiological homeostasis and affects fillet quality. Maintenance of high-quality seafood is important to ensure the production of a marketable product. This study assessed how sequential stressors affect the sensory and quality characteristics of catfish (Ictalurus punctatus) fillets. Three stress trials were conducted where temperature (25 or 33 °C) and dissolved oxygen (DO, approximately 2.5 or >5 mg/L) were manipulated followed by socking and transport stress. After each stage of harvest (environmental stress, socking, and transport), fillet yield, consumer acceptability, descriptive evaluation, cook loss, tenderness, and pH were evaluated. Fillet yield decreased with increasing severity of environmental stress. Fillets from the severe stress treatment (33 °C, approximately 2.5 mg/L) received the highest acceptability scores (P < 0.05). Control fillets (25 °C, >5 mg/L) were the least acceptable (P < 0.05). Increased intensity of less favorable flavor attributes commonly associated with catfish resulted in the differences in acceptability among treatments. As fish progressed through the harvest event, cook loss decreased, tenderness increased, and pH increased, indicating that stress induced textural changes. The data suggest that although environmental stress results in slight changes in flavor attributes, its effects on acceptability are minor with fillets from all treatments still liked (>6 on a 9 point scale). Socking and transport were identified to positively affect textural characteristics of catfish fillets. Although the effects observed were not likely to negatively impact consumer acceptance, a strict management plan should be followed to maintain consistency in the product and avoid changes in stressors that might alter quality more drastically. © 2016 Institute of Food Technologists®

When private water rights become a public asset: Stakeholder perspectives on the fairness of environmental water management

NASA Astrophysics Data System (ADS)

Lukasiewicz, Anna; Dare, Melanie (Lain)

2016-05-01

This paper explores environmental water management as a social process of navigating conflicting interests through a distributive justice lens. Environmental water management can achieve substantial ecological outcomes and address ongoing river degradation caused by past management and climate change; however it also causes specific and substantial burdens and benefits to different groups of stakeholders. Given that in most developed countries the majority of land is under private tenure, environmental watering must have active cooperation of private landholders to achieve its ecological outcomes and thus it must effectively deal with an array of vested interests. Australia's reforms aimed at reallocating water from production to the environment have resulted in significant considerable volumes of environmental water. In the state of New South Wales, this water is managed by the state and national governments with the help of five Environmental Water Advisory Groups made up of a wide representation of interests. In this paper, we explore the perceptions of environmental, government, irrigator and grazing representatives, which demonstrate conflicting principles over how environmental water should be distributed. We detail how government water managers reconcile competing distributive principles of equity (ensuring that no one is disproportionally affected or benefits unduly), need (achieving environmental outcomes) and efficiency (prioritizing operational feasibility) in order to maintain the social acceptability of environmental water.

An Analytic Network Process approach for the environmental aspect selection problem — A case study for a hand blender

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bereketli Zafeirakopoulos, Ilke, E-mail: ibereketli@gsu.edu.tr; Erol Genevois, Mujde, E-mail: merol@gsu.edu.tr

Life Cycle Assessment is a tool to assess, in a systematic way, the environmental aspects and its potential environmental impacts and resources used throughout a product's life cycle. It is widely accepted and considered as one of the most powerful tools to support decision-making processes used in ecodesign and sustainable production in order to learn about the most problematic parts and life cycle phases of a product and to have a projection for future improvements. However, since Life Cycle Assessment is a cost and time intensive method, companies do not intend to carry out a full version of it, exceptmore » for large corporate ones. Especially for small and medium sized enterprises, which do not have enough budget for and knowledge on sustainable production and ecodesign approaches, focusing only on the most important possible environmental aspect is unavoidable. In this direction, finding the right environmental aspect to work on is crucial for the companies. In this study, a multi-criteria decision-making methodology, Analytic Network Process is proposed to select the most relevant environmental aspect. The proposed methodology aims at providing a simplified environmental assessment to producers. It is applied for a hand blender, which is a member of the Electrical and Electronic Equipment family. The decision criteria for the environmental aspects and relations of dependence are defined. The evaluation is made by the Analytic Network Process in order to create a realistic approach to inter-dependencies among the criteria. The results are computed via the Super Decisions software. Finally, it is observed that the procedure is completed in less time, with less data, with less cost and in a less subjective way than conventional approaches. - Highlights: • We present a simplified environmental assessment methodology to support LCA. • ANP is proposed to select the most relevant environmental aspect. • ANP deals well with the interdependencies between aspects and impacts. • The methodology is less subjective, less complicated, and less time–money consuming. • The proposed methodology is suitable for use by SMEs.« less

Some thoughts on problems associated with various sampling media used for environmental monitoring

USGS Publications Warehouse

Horowitz, A.J.

1997-01-01

Modern analytical instrumentation is capable of measuring a variety of trace elements at concentrations down into the single or double digit parts-per-trillion (ng l-1) range. This holds for the three most common sample media currently used in environmental monitoring programs: filtered water, whole-water and separated suspended sediment. Unfortunately, current analytical capabilities have exceeded the current capacity to collect both uncontaminated and representative environmental samples. The success of any trace element monitoring program requires that this issue be both understood and addressed. The environmental monitoring of trace elements requires the collection of calendar- and event-based dissolved and suspended sediment samples. There are unique problems associated with the collection and chemical analyses of both types of sample media. Over the past 10 years, reported ambient dissolved trace element concentrations have declined. Generally, these decreases do not reflect better water quality, but rather improvements in the procedures used to collect, process, preserve and analyze these samples without contaminating them during these steps. Further, recent studies have shown that the currently accepted operational definition of dissolved constituents (material passing a 0.45 ??m membrane filter) is inadequat owing to sampling and processing artifacts. The existence of these artifacts raises questions about the generation of accurate, precise and comparable 'dissolved' trace element data. Suspended sediment and associated trace elements can display marked short- and long-term spatial and temporal variability. This implies that spatially representative samples only can be obtained by generating composites using depth- and width-integrated sampling techniques. Additionally, temporal variations have led to the view that the determination of annual trace element fluxes may require nearly constant (e.g., high-frequency) sampling and subsequent chemical analyses. Ultimately, sampling frequency for flux estimates becomes dependent on the time period of concern (daily, weekly, monthly, yearly) and the amount of acceptable error associated with these estimates.

Technical specifications for mechanical recycling of agricultural plastic waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Briassoulis, D., E-mail: briassou@aua.gr; Hiskakis, M.; Babou, E.

Highlights: • Technical specifications for agricultural plastic wastes (APWs) recycling proposed. • Specifications are the base for best economical and environmental APW valorisation. • Analysis of APW reveals inherent characteristics and constraints of APW streams. • Thorough survey on mechanical recycling processes and industry as it applies to APW. • Specifications for APW recycling tested, adjusted and verified through pilot trials. - Abstract: Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plasticmore » waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW.« less

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PORTABLE GAS CHROMATOGRAPH - PERKIN-ELMER PHOTOVAC, INC. VOYAGOR

EPA Science Inventory

The U.S Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. Reports document the performa...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - CHROMATOGRAPH/MASS SPECTOMETOR INLICON, INC. HAPSITE

EPA Science Inventory

The U.S. Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. As part of this program, the...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PORTABLE GAS CHROMATOGRAPH - SENTEX SYSTEMS, INC. SCENTOGRAPH PLUS II

EPA Science Inventory

The U.S. Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. This report documents demons...

MOBILE ATOMIC ABSORPTION SPECTROMETER OPERATED BY PACE ENVIRONMENTAL FOR METALS-CONTAMINATED SOIL CHARACTERIZATION

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA), through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. This report describes ...

EPA New England Opens Nomination Period for Annual Environmental Merit Awards

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency office in New England is accepting nominations for New England people, organizations, government entities or businesses whose environmental achievements during the past year deserve recognition.

Meanings and implications of acceptability judgements for wilderness use impacts

Treesearch

Amy F. Hoss; Mark W. Brunson

2000-01-01

While the concept of “acceptability” is central to the Limits of Acceptable Change (LAC) framework, there is inadequate understanding of how “acceptability” is judged and how unacceptable conditions affect visitor experiences. To address this knowledge gap, visitors to nine wilderness areas were interviewed. Judgments of social and environmental conditions fell into...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PORTABLE GAS CHROMATOGRAPH ELECTRONIC SENSOR TECHNOLOGY MODEL 4100

EPA Science Inventory

The U.S. Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. As part of this program, the...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PHOTOACOUSTIC SPECTROPHOTOMATER INNOVA AIR TECH INSTRUMENTS MODEL 1312 MULTI-GAS MONITOR

EPA Science Inventory

The U.S. Environmental Protection Agency, Through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. This report documents demons...

Preliminary Investigation of the Environmental Sensitivity of Acoustic Signal Transmission in the Wavenumber Domain with Respect to Source Depth Determination.

DTIC Science & Technology

1982-12-01

Coppens showed great kindness by accepting supervision of this research when time was short. Vis con - cern, understanding and direzticn led to an...related to computer processing time and storage requirements. These factors will not he addressed directly in this resear:h because the pro - cessing...computational efficiency. Disadvantages are a uniform mesh and periodic boundary con - ditions to satisfy the FFT, and filtering of tho sound speed profile by

High gradient magnetic beneficiation of dry pulverized coal via upwardly directed recirculating fluidization

DOEpatents

Eissenberg, David M.; Liu, Yin-An

1980-01-01

This invention relates to an improved device and method for the high gradient magnetic beneficiation of dry pulverized coal, for the purpose of removing sulfur and ash from the coal whereby the product is a dry environmentally acceptable, low-sulfur fuel. The process involves upwardly directed recirculating air fluidization of selectively sized powdered coal in a separator having sections of increasing diameters in the direction of air flow, with magnetic field and flow rates chosen for optimum separations depending upon particulate size.

Are We Meeting the Goal of Responsible Environmental Behavior: An Examination of Nature and Environmental Education Center Goals.

ERIC Educational Resources Information Center

Simmons, Deborah A.

1991-01-01

Through two surveys of nature and environmental centers throughout the United States, the author compares the centers' expressed goals with the goals of environmental education. These goals were determined by an accepted behavior model that is considered conducive to environmentally responsible behavior. (17 references) (MCO)

Space Station Freedom Environmental Health Care Program

NASA Technical Reports Server (NTRS)

Richard, Elizabeth E.; Russo, Dane M.

1992-01-01

The paper discusses the environmental planning and monitoring aspects of the Space Station Freedom (SSF) Environmental Health Care Program, which encompasses all phases of the SSF assembly and operation from the first element entry at MB-6 through the Permanent Manned Capability and beyond. Environmental planning involves the definition of acceptability limits and monitoring requirements for the radiation dose barothermal parameters and potential contaminants in the SSF air and water and on internal surfaces. Inflight monitoring will be implemented through the Environmental Health System, which consists of five subsystems: Microbiology, Toxicology, Water Quality, Radiation, and Barothermal Physiology. In addition to the environmental data interpretation and analysis conducted after each mission, the new data will be compared to archived data for statistical and long-term trend analysis and determination of risk exposures. Results of these analyses will be used to modify the acceptability limits and monitoring requirements for the future.

Prospectus

PubMed Central

Parsons, Peter A.

2009-01-01

Free living organisms typically occur in harsh environments challenged by abiotic stresses of varying intensities. Taking ionizing radiation and caloric restriction as examples, environmental variation from benign to extreme gives a fitness-stress continuum where energetic efficiency, a measure of fitness, is inversely related to stress level. Hormesis occurs in benign regions for these examples. In contrast aging emphasizes survival towards the limits of survival under accumulating stress from Reactive Oxygen Species, ROS. An energetic evolutionary approach underlies an ecological aging theory based principally upon survival, which incorporates hormesis. Multiple environmental agents contributing to hormesis should be considered by those attempting to improve the quality of life by delaying the onset of senescence, so enhancing survival. Caloric restriction has wider acceptance in this process than ionizing radiation. PMID:20221282

The Anthropocene concept in ecology and conservation.

PubMed

Corlett, Richard T

2015-01-01

The term 'Anthropocene' was first used in the year 2000 to refer to the current time period in which human impacts are at least as important as natural processes. It is currently being considered as a potential geological epoch, following on from the Holocene. While most environmental scientists accept that many key environmental parameters are now outside their Holocene ranges, there is no agreement on when the Anthropocene started, with plausible dates ranging from the Late Pleistocene megafaunal extinctions to the recent globalization of industrial impacts. In ecology, the Anthropocene concept has focused attention on human-dominated habitats and novel ecosystems, while in conservation biology it has sparked a divisive debate on the continued relevance of the traditional biocentric aims. Copyright © 2014 Elsevier Ltd. All rights reserved.

International Space Station Environmental Control and Life Support System Acceptance Testing for Node 1 Temperature and Humidity Control Subsystem

NASA Technical Reports Server (NTRS)

Williams, David E.

2011-01-01

The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Storage (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper will provide a summary of the Node 1 ECLS THC subsystem design and a detailed discussion of the ISS ECLS Acceptance Testing methodology utilized for this subsystem.The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Storage (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper will provide a summary of the Node 1 ECLS THC subsystem design and a detailed discussion of the ISS ECLS Acceptance Testing methodology utilized for this subsystem.

Environmental impact assessment in the Philippines: Progress, problems, and directions for the future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ross, W.A.

1994-07-01

The environmental impact statement (EIS) system of the Philippines is reviewed, identifying progress made in its effective implementation since 1986. Improvement in coverage is noted and real commitment to good environmental impact assessment (EIA) practice is found in those responsible for the EIS system. Project proponents show a modest acceptance of the system. Major problems remaining are: (1) the EIS system is seen as a bureaucratic requirement needed to obtain project approvals; (2) political interference determines the outcome of some environmental reviews; (3) questionable practices by public servants serve to discredit the system; and (4) the treatment of projects inmore » environmentally critical areas is less than satisfactory. Based on the principle that it is essential to establish a credible process seen to work effectively by the public, politicians, the government bureaucracy, and proponents, suggestions for improvement are made. They deal with the treatment of EISs for projects already under construction, EIA training courses, and simple adjustments to the EIS system to focus it on the most important projects.« less

Environmentally and economically efficient utilization of coal processing waste.

PubMed

Dmitrienko, Margarita A; Strizhak, Pavel A

2017-11-15

High concentrations of hazardous anthropogenic emissions (sulfur, nitrogen and carbon oxides) from solid fuel combustion in coal burning plants cause environmental problems that have been especially pressing over the last 20-30 years. A promising solution to these problems is a switch from conventional pulverized coal combustion to coal-water slurry fuel. In this paper, we pay special attention to the environmental indicators characterizing the combustion of different coal ranks (gas, flame, coking, low-caking, and nonbaking coals) and coal-water slurry fuels based on the coal processing waste - filter cakes. There have been no consistent data so far on the acceptable intervals for the anthropogenic emissions of sulfur (SO x ), nitrogen (NO x ) and carbon (CO, CO 2 ) oxides. Using a specialized combustion chamber and gas analyzing system, we have measured the concentrations of typical coal and filter-cake-based CWS combustion products. We have also calculated the typical combustion heat of the fuels under study and measured the ratio between environmental and energy attributes. The research findings show that the use of filter cakes in the form of CWS is even better than coals in terms of environment and economy. Wide utilization of filter cakes solves many environmental problems: the areas of contaminated sites shrink, anthropogenic emissions decrease, and there is no need to develop new coal mines anymore. Copyright © 2017 Elsevier B.V. All rights reserved.

Improving the effectiveness of impact assessment pertaining to Indigenous peoples in the Brazilian environmental licensing procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanna, Philippe; Vanclay, Frank, E-mail: frank.vanclay@rug.nl; Langdon, Esther Jean

The number of environmental licence applications for projects affecting Indigenous peoples in Brazil has increased since the implementation of a major infrastructure program (Programa de Aceleração do Crescimento) in 2007. This increase has caused problems for Brazilian agencies involved in environmental licensing procedures (IBAMA, FUNAI and others). We analyze the Brazilian environmental licensing procedure for situations involving Indigenous peoples, Maroons (Quilombolas) or other traditional communities in order to identify potential improvements for Brazil and potentially other countries. Although Brazilian procedures are consistent with international best practice in environmental licensing, in practice social impacts are inadequately addressed, mitigation measures are poorlymore » implemented, and there is a lack of enforcement and compliance. The paper is based on document analysis and interviews with key actors in governmental and non-governmental organizations and Indigenous leaders. We suggest that Free, Prior and Informed Consent (FPIC) processes need to be conducted at the earliest stages of project planning, and that Indigenous peoples should actively participate in impact assessment, monitoring and evaluation processes. In order to achieve a social licence to operate, there needs to be full recognition of traditional knowledge and acceptance of Indigenous values and concepts. We also recommend increased involvement of social experts and mediators as well as improved accountability, enforcement and grievance mechanisms in the licensing process. - Highlights: • The Brazilian environmental licensing system needs to address social impacts better. • Communities need to be consulted at the earliest stage possible. • Indigenous peoples need to be invited to participate in impact assessment teams. • Independent Indigenous committees to monitor implementation of mitigation measures. • Accountability, enforcement and grievance mechanisms need to be improved.« less

Environmental exposure assessment framework for nanoparticles in solid waste.

PubMed

Boldrin, Alessio; Hansen, Steffen Foss; Baun, Anders; Hartmann, Nanna Isabella Bloch; Astrup, Thomas Fruergaard

2014-01-01

Information related to the potential environmental exposure of engineered nanomaterials (ENMs) in the solid waste management phase is extremely scarce. In this paper, we define nanowaste as separately collected or collectable waste materials which are or contain ENMs, and we present a five-step framework for the systematic assessment of ENM exposure during nanowaste management. The framework includes deriving EOL nanoproducts and evaluating the physicochemical properties of the nanostructure, matrix properties and nanowaste treatment processes as well as transformation processes and environment releases, eventually leading to a final assessment of potential ENM exposure. The proposed framework was applied to three selected nanoproducts: nanosilver polyester textile, nanoTiO 2 sunscreen lotion and carbon nanotube tennis racquets. We found that the potential global environmental exposure of ENMs associated with these three products was an estimated 0.5-143 Mg/year, which can also be characterised qualitatively as medium, medium, low, respectively. Specific challenges remain and should be subject to further research: (1) analytical techniques for the characterisation of nanowaste and its transformation during waste treatment processes, (2) mechanisms for the release of ENMs, (3) the quantification of nanowaste amounts at the regional scale, (4) a definition of acceptable limit values for exposure to ENMs from nanowaste and (5) the reporting of nanowaste generation data.

Environmental exposure assessment framework for nanoparticles in solid waste

NASA Astrophysics Data System (ADS)

Boldrin, Alessio; Hansen, Steffen Foss; Baun, Anders; Hartmann, Nanna Isabella Bloch; Astrup, Thomas Fruergaard

2014-06-01

Information related to the potential environmental exposure of engineered nanomaterials (ENMs) in the solid waste management phase is extremely scarce. In this paper, we define nanowaste as separately collected or collectable waste materials which are or contain ENMs, and we present a five-step framework for the systematic assessment of ENM exposure during nanowaste management. The framework includes deriving EOL nanoproducts and evaluating the physicochemical properties of the nanostructure, matrix properties and nanowaste treatment processes as well as transformation processes and environment releases, eventually leading to a final assessment of potential ENM exposure. The proposed framework was applied to three selected nanoproducts: nanosilver polyester textile, nanoTiO2 sunscreen lotion and carbon nanotube tennis racquets. We found that the potential global environmental exposure of ENMs associated with these three products was an estimated 0.5-143 Mg/year, which can also be characterised qualitatively as medium, medium, low, respectively. Specific challenges remain and should be subject to further research: (1) analytical techniques for the characterisation of nanowaste and its transformation during waste treatment processes, (2) mechanisms for the release of ENMs, (3) the quantification of nanowaste amounts at the regional scale, (4) a definition of acceptable limit values for exposure to ENMs from nanowaste and (5) the reporting of nanowaste generation data.

Evaluation of concepts for controlling exhaust emissions from minimally processed petroleum and synthetic fuels

NASA Technical Reports Server (NTRS)

Russell, P. L.; Beal, G. W.; Sederquist, R. A.; Shultz, D.

1981-01-01

Rich-lean combustor concepts designed to enhance rich combustion chemistry and increase combustor flexibility for NO(x) reduction with minimally processed fuels are examined. Processes such as rich product recirculation in the rich chamber, rich-lean annihilation, and graduated air addition or staged rich combustion to release bound nitrogen in steps of reduced equivalence ratio are discussed. Variations to the baseline rapid quench section are considered, and the effect of residence time in the rich zone is investigated. The feasibility of using uncooled non-metallic materials for the rich zone combustion construction is also addressed. The preliminary results indicate that rich primary zone staged combustion provides environmentally acceptable operation with residual and/or synthetic coal-derived liquid fuels

Processing of nutritious, safe and acceptable foods from cells candidate crops

NASA Astrophysics Data System (ADS)

Fu, B.; Nelson, P. E.; Irvine, R.; Kanach, L. L.

A controlled ecological life-support system (CELSS) is required to sustain life for long-duration space missions. The challenge is preparing a wide variety of tasty, familiar, and nutritious foods from CELSS candidate crops under space environmental conditions. Conventional food processing technologies will have to be modified to adapt to the space environment. Extrusion is one of the processes being examined as a means of converting raw plant biomass into familiar foods. A nutrition-improved pasta has been developed using cowpea as a replacement for a portion of the durum semolina. A freeze-drying system that simulates the space conditions has also been developed. Other technologies that would fulfill the requirements of a CELSS will also be addressed.

Processing of nutritious, safe and acceptable foods from CELSS candidate crops

NASA Technical Reports Server (NTRS)

Fu, B.; Nelson, P. E.; Irvine, R.; Kanach, L. L.; Mitchell, C. A. (Principal Investigator)

1996-01-01

A controlled ecological life-support system (CELSS) is required to sustain life for long-duration space missions. The challenge is preparing a wide variety of tasty, familiar, and nutritious foods from CELSS candidate crops under space environmental conditions. Conventional food processing technologies will have to be modified to adapt to the space environment. Extrusion is one of the processes being examined as a means of converting raw plant biomass into familiar foods. A nutrition-improved pasta has been developed using cowpea as a replacement for a portion of the durum semolina. A freeze-drying system that simulates the space conditions has also been developed. Other technologies that would fulfill the requirements of a CELSS will also be addressed.

The process of accepting breast cancer among Chinese women: A grounded theory study.

PubMed

Chen, Shuang-Qin; Liu, Jun-E; Li, Zhi; Su, Ya-Li

2017-06-01

To describe the process by which Chinese women accept living with breast cancer. Individual interviews were conducted with 18 Chinese women who completed breast cancer treatment. Data were collected from September 2014 to January 2015 at a large tertiary teaching hospital in Beijing, China. In this grounded theory study, data were analyzed using constant comparative and coding analysis methods. In order to explain the process of accepting having breast cancer among women in China through the grounded theory study, a model that includes 5 axial categories was developed. Cognitive reconstruction emerged as the core category. The extent to which the women with breast cancer accepted having the disease was found to increase with the treatment stage and as their treatment stage progressed with time. The accepting process included five stages: non-acceptance, passive acceptance, willingness to accept, behavioral acceptance, and transcendence of acceptance. Our study using grounded theory study develops a model describing the process by which women accept having breast cancer. The model provides some intervention opportunities at every point of the process. Copyright © 2017. Published by Elsevier Ltd.

Bread enriched in lycopene and other bioactive compounds by addition of dry tomato waste.

PubMed

Nour, Violeta; Ionica, Mira Elena; Trandafir, Ion

2015-12-01

The tomato processing industry generates high amounts of waste, mainly tomato skins and seeds, which create environmental problems. These residues are attractive sources of valuable bioactive components and pigments. A relatively simple recovery technology could consist of production of powders to be directly incorporated into foods. Tomato waste coming from a Romanian tomato processing unit were analyzed for the content of several bioactive compounds like ascorbic acid, β-carotene, lycopene, total phenolics, mineral and trace elements. In addition, its antioxidant capacity was assayed. Results revealed that tomato waste (skins and seeds) could be successfully utilized as functional ingredient for the formulation of antioxidant rich functional foods. Dry tomato processing waste were used to supplement wheat flour at 6 and 10 % levels (w/w flour basis) and the effects on the bread's physicochemical, baking and sensorial characteristics were studied. The following changes were observed: increase in moisture content, titratable acidity and bread crumb elasticity, reduction in specific volume and bread crumb porosity. The addition of dry tomato waste at 6 % resulted in bread with good sensory characteristics and overall acceptability but as the amount of dry tomato waste increased to 10 %, bread was less acceptable.

32 CFR 1806.3 - Procedures governing acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COUNTERINTELLIGENCE CENTER PROCEDURES GOVERNING ACCEPTANCE OF SERVICE OF PROCESS § 1806.3 Procedures governing acceptance of service of process. (a) Service of Process Upon the NACIC or a NACIC Employee in an Official..., personal service of process may be accepted only by NACIC Counsel, Director, NACIC, or Deputy Director...

The physiological basis for spacecraft environmental limits

NASA Technical Reports Server (NTRS)

Waligora, J. M. (Compiler)

1979-01-01

Limits for operational environments are discussed in terms of acceptable physiological changes. The environmental factors considered are pressure, contaminants, temperature, acceleration, noise, rf radiation, and weightlessness.

Alternative Radiological Characterization of Sealed Source TRU Waste for WIPP Disposal (LAUR-05-8776)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitworth, J.; Pearson, M.; Feldman, A.

2006-07-01

The Offsite Source Recovery (OSR) Project at Los Alamos National Laboratory is now shipping transuranic (TRU) waste containers to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. Sealed source waste disposal has become possible in part because OSR personnel were able to obtain Environmental Protection Agency (EPA) and DOE-CBFO approval for an alternative radiological characterization procedure relying on acceptable knowledge (AK) and modeling, rather than on non-destructive assay (NDA) of each container. This is the first successful qualification of an 'alternate methodology' under the radiological characterization requirements of the WIPP Waste Acceptance Criteria (WAC) by any TRUmore » waste generator site. This paper describes the approach OSR uses to radiologically characterize its sealed source waste and the process by which it obtained certification of this approach. (authors)« less

A novel approach for calculating shelf life of minimally processed vegetables.

PubMed

Corbo, Maria Rosaria; Del Nobile, Matteo Alessandro; Sinigaglia, Milena

2006-01-15

Shelf life of minimally processed vegetables is often calculated by using the kinetic parameters of Gompertz equation as modified by Zwietering et al. [Zwietering, M.H., Jongenburger, F.M., Roumbouts, M., van't Riet, K., 1990. Modelling of the bacterial growth curve. Applied and Environmental Microbiology 56, 1875-1881.] taking 5x10(7) CFU/g as the maximum acceptable contamination value consistent with acceptable quality of these products. As this method does not allow estimation of the standard errors of the shelf life, in this paper the modified Gompertz equation was re-parameterized to directly include the shelf life as a fitting parameter among the Gompertz parameters. Being the shelf life a fitting parameter is possible to determine its confidence interval by fitting the proposed equation to the experimental data. The goodness-of-fit of this new equation was tested by using mesophilic bacteria cell loads from different minimally processed vegetables (packaged fresh-cut lettuce, fennel and shredded carrots) that differed for some process operations or for package atmosphere. The new equation was able to describe the data well and to estimate the shelf life. The results obtained emphasize the importance of using the standard errors for the shelf life value to show significant differences among the samples.

Alternative to Nitric Acid for Passivation of Stainless Steel Alloys

NASA Technical Reports Server (NTRS)

Lewis, Pattie L.; Kolody, Mark; Curran, Jerry

2013-01-01

Corrosion is an extensive problem that affects the Department of Defense (DoD) and National Aeronautics and Space Administration (NASA). The deleterious effects of corrosion result in steep costs, asset downtime affecting mission readiness, and safety risks to personnel. Consequently, it is vital to reduce corrosion costs and risks in a sustainable manner. The DoD and NASA have numerous structures and equipment that are fabricated from stainless steel. The standard practice for protection of stainless steel is a process called passivation. Typical passivation procedures call for the use of nitric acid; however, there are a number of environmental, worker safety, and operational issues associated with its use. Citric acid offers a variety of benefits including increased safety for personnel, reduced environmental impact, and reduced operational cost. DoD and NASA agreed to collaborate to validate citric acid as an acceptable passivating agent for stainless steel. This paper details our investigation of prior work developing the citric acid passivation process, development of the test plan, optimization of the process for specific stainless steel alloys, ongoing and planned testing to elucidate the process' resistance to corrosion in comparison to nitric acid, and preliminary results.

Review of Italian experience on automotive shredder residue characterization and management.

PubMed

Cossu, R; Fiore, S; Lai, T; Luciano, A; Mancini, G; Ruffino, B; Viotti, P; Zanetti, M C

2014-10-01

Automotive Shredder Residue (ASR) is a special waste that can be classified as either hazardous or non hazardous depending on the amount of hazardous substances and on the features of leachate gathered from EN12457/2 test. However both the strict regulation concerning landfills and the EU targets related to End-of-Life Vehicles (ELVs) recovery and recycling rate to achieve by 2015 (Directive 2000/53/EC), will limit current landfilling practice and will impose an increased efficiency of ELVs valorization. The present paper considers ELVs context in Italy, taking into account ASRs physical-chemical features and current processing practice, focusing on the enhancement of secondary materials recovery. The application in waste-to-energy plants, cement kilns or metallurgical processes is also analyzed, with a particular attention to the possible connected environmental impacts. Pyrolysis and gasification are considered as emerging technologies although the only use of ASR is debatable; its mixing with other waste streams is gradually being applied in commercial processes. The environmental impacts of the processes are acceptable, but more supporting data are needed and the advantage over (co-)incineration remains to be proven. Copyright © 2013 Elsevier Ltd. All rights reserved.

77 FR 47827 - Intent To Prepare an Environmental Impact Statement for the Kissimmee Basin Modified Water...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-10

... more acceptable balance among flood control, water supply, aquatic plant management, and natural... achieve a more acceptable balance among flood control, water supply, aquatic plant management, and natural...

LOS ALAMOS NATIONAL LABORATORIES: LASER-INDUCED BREAKDOWN SPECTROMETER FOR METALS-CONTAMINATED SOIL CHARACTERIZATION

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA), through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. This report describes ...

MELOK INSTRUMENTS, INC. LASER-INDUCED BREAKDOWN SPECTROMETER FOR METALS-CONTAMINATED SOIL CHARACTERIZATION

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA), through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. This report describes ...

Public Hearing or `Hearing Public'? An Evaluation of the Participation of Local Stakeholders in Environmental Impact Assessment of Ghana's Jubilee Oil Fields

NASA Astrophysics Data System (ADS)

Bawole, Justice Nyigmah

2013-08-01

This article investigates the involvement of local stakeholders in the environmental impact assessment (EIA) processes of Ghana's first off-shore oil fields (the Jubilee fields). Adopting key informants interviews and documentary reviews, the article argues that the public hearings and the other stakeholder engagement processes were cosmetic and rhetoric with the view to meeting legal requirements rather than a purposeful interest in eliciting inputs from local stakeholders. It further argues that the operators appear to lack the social legitimacy and social license that will make them acceptable in the project communities. A rigorous community engagement along with a commitment to actively involving local stakeholders in the corporate social responsibility (CSR) programmes of the partners may enhance the image of the partners and improve their social legitimacy. Local government agencies should be capacitated to actively engage project organisers; and government must mitigate the impact of the oil projects through well-structured social support programmes.

Public hearing or 'hearing public'? an evaluation of the participation of local stakeholders in environmental impact assessment of Ghana's Jubilee oil fields.

PubMed

Bawole, Justice Nyigmah

2013-08-01

This article investigates the involvement of local stakeholders in the environmental impact assessment (EIA) processes of Ghana's first off-shore oil fields (the Jubilee fields). Adopting key informants interviews and documentary reviews, the article argues that the public hearings and the other stakeholder engagement processes were cosmetic and rhetoric with the view to meeting legal requirements rather than a purposeful interest in eliciting inputs from local stakeholders. It further argues that the operators appear to lack the social legitimacy and social license that will make them acceptable in the project communities. A rigorous community engagement along with a commitment to actively involving local stakeholders in the corporate social responsibility (CSR) programmes of the partners may enhance the image of the partners and improve their social legitimacy. Local government agencies should be capacitated to actively engage project organisers; and government must mitigate the impact of the oil projects through well-structured social support programmes.

Chemical Transformation System: Cloud Based ...

EPA Pesticide Factsheets

Integrated Environmental Modeling (IEM) systems that account for the fate/transport of organics frequently require physicochemical properties as well as transformation products. A myriad of chemical property databases exist but these can be difficult to access and often do not contain the proprietary chemicals that environmental regulators must consider. We are building the Chemical Transformation System (CTS) to facilitate model parameterization and analysis. CTS integrates a number of physicochemical property calculators into the system including EPI Suite, SPARC, TEST and ChemAxon. The calculators are heterogeneous in their scientific methodologies, technology implementations and deployment stacks. CTS also includes a chemical transformation processing engine that has been loaded with reaction libraries for human biotransformation, abiotic reduction and abiotic hydrolysis. CTS implements a common interface for the disparate calculators accepting molecular identifiers (SMILES, IUPAC, CAS#, user-drawn molecule) before submission for processing. To make the system as accessible as possible and provide a consistent programmatic interface, we wrapped the calculators in a standardized RESTful Application Programming Interface (API) which makes it capable of servicing a much broader spectrum of clients without constraints to interoperability such as operating system or programming language. CTS is hosted in a shared cloud environment, the Quantitative Environmental

International Space Station Environmental Control and Life Support System Acceptance Testing for Node 1 Atmosphere Control and Supply Subsystem

NASA Technical Reports Server (NTRS)

Williams, David E.

2009-01-01

The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper provides a summary of the Node 1 ECLS ACS subsystem design and a detailed discussion of the ISS ECLS Acceptance Testing methodology utilized for that subsystem.

Different shades of green: a case study of support for wind farms in the rural midwest.

PubMed

Mulvaney, Kate K; Woodson, Patrick; Prokopy, Linda Stalker

2013-05-01

Benton County, in north-central Indiana, USA has successfully sited more than 500 turbines. To understand Benton County's acceptance of wind farms, a holistic case study was conducted that included a document review, a survey of local residents and interviews with key stakeholders. Survey questionnaires were sent to 750 residents asking questions about attitudes toward the wind farms, perceived benefits and impacts from the wind farms, environmental attitudes, and demographic information. Key stakeholders were also interviewed for a deeper understanding of the historical timeline and community acceptance of the wind farm development. While there is limited opposition to the turbines, on the whole the community presents a front of acceptance. Financial, rather than environmental, benefits are the main reason for the acceptance. Although significant in other case studies, transparency and participation do not play a large role in Benton County's acceptance. Most residents are not concerned with either visual impacts or noise from the wind turbines. More concrete benefits to the community, such as reduced energy bills for county residents, could help to extend acceptance even further within the community. Although there are concerns about the acceptance of wind farms and the impacts of those farms on local residents in both peer-reviewed literature and popular media, we found little evidence of those concerns in Benton County. Instead, we found Benton County to be a community largely accepting of wind farms.

Different Shades of Green: A Case Study of Support for Wind Farms in the Rural Midwest

NASA Astrophysics Data System (ADS)

Mulvaney, Kate K.; Woodson, Patrick; Prokopy, Linda Stalker

2013-05-01

Benton County, in north-central Indiana, USA has successfully sited more than 500 turbines. To understand Benton County's acceptance of wind farms, a holistic case study was conducted that included a document review, a survey of local residents and interviews with key stakeholders. Survey questionnaires were sent to 750 residents asking questions about attitudes toward the wind farms, perceived benefits and impacts from the wind farms, environmental attitudes, and demographic information. Key stakeholders were also interviewed for a deeper understanding of the historical timeline and community acceptance of the wind farm development. While there is limited opposition to the turbines, on the whole the community presents a front of acceptance. Financial, rather than environmental, benefits are the main reason for the acceptance. Although significant in other case studies, transparency and participation do not play a large role in Benton County's acceptance. Most residents are not concerned with either visual impacts or noise from the wind turbines. More concrete benefits to the community, such as reduced energy bills for county residents, could help to extend acceptance even further within the community. Although there are concerns about the acceptance of wind farms and the impacts of those farms on local residents in both peer-reviewed literature and popular media, we found little evidence of those concerns in Benton County. Instead, we found Benton County to be a community largely accepting of wind farms.

Solid-state chemistry and particle engineering with supercritical fluids in pharmaceutics.

PubMed

Pasquali, Irene; Bettini, Ruggero; Giordano, Ferdinando

2006-03-01

The present commentary aims to review the modern and innovative strategies in particle engineering by the supercritical fluid technologies and it is principally concerned with the aspects of solid-state chemistry. Supercritical fluids based processes for particle production have been proved suitable for controlling solid-state, morphology and particle size of pharmaceuticals, in some cases on an industrial scale. Supercritical fluids should be considered in a prominent position in the development processes of drug products for the 21st century. In this respect, this innovative technology will help in meeting the more and more stringent requirements of regulatory authorities in terms of solid-state characterisation and purity, and environmental acceptability.

Affective Learning: Environmental Ethics and Human Ecology

ERIC Educational Resources Information Center

Gough, Noel P.

1977-01-01

This discussion of home economics as a discipline which should focus on its affective foundations, covers the following areas: Affective context of home economics education, the adequacy of the home economics value complex for coping with environmental problems, and toward an acceptable environmental ethic. (SH)

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: ECR TECHNOLOGIES, INC., EARTHLINKED GROUND-SOURCE HEAT PUMP WATER HEATING SYSTEM

EPA Science Inventory

EPA has created the Environmental Technology Verification program to provide high quality, peer reviewed data on technology performance. This data is expected to accelerate the acceptance and use of improved environmental protection technologies. The Greenhouse Gas Technology C...

RH-TRU Waste Characterization by Acceptable Knowledge at the Idaho National Engineering and Environmental Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schulz, C.; Givens, C.; Bhatt, R.

2003-02-24

Idaho National Engineering and Environmental Laboratory (INEEL) is conducting an effort to characterize approximately 620 drums of remote-handled (RH-) transuranic (TRU) waste currently in its inventory that were generated at the Argonne National Laboratory-East (ANL-E) Alpha Gamma Hot Cell Facility (AGHCF) between 1971 and 1995. The waste was generated at the AGHCF during the destructive examination of irradiated and unirradiated fuel pins, targets, and other materials from reactor programs at ANL-West (ANL-W) and other Department of Energy (DOE) reactors. In support of this effort, Shaw Environmental and Infrastructure (formerly IT Corporation) developed an acceptable knowledge (AK) collection and management programmore » based on existing contact-handled (CH)-TRU waste program requirements and proposed RH-TRU waste program requirements in effect in July 2001. Consistent with Attachments B-B6 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit (HWFP) and th e proposed Class 3 permit modification (Attachment R [RH-WAP] of this permit), the draft AK Summary Report prepared under the AK procedure describes the waste generating process and includes determinations in the following areas based on AK: physical form (currently identified at the Waste Matrix Code level); waste stream delineation; applicability of hazardous waste numbers for hazardous waste constituents; and prohibited items. In addition, the procedure requires and the draft summary report contains information supporting determinations in the areas of defense relationship and radiological characterization.« less

Editorial

NASA Astrophysics Data System (ADS)

Musilek, L.; Dunn, W. L.

2017-08-01

The selected proceedings of the 13th International Symposium on Radiation Physics (ISRP-13) are presented here across a broad range of important topics including: Fundamental processes in radiation physics, Theoretical investigations, New radiation sources, techniques & detectors, Absorption and fluorescence spectroscopy (XAFS, XANES, XRF Spectroscopy, Raman, Infrared …), Applications of radiation in material science, nano-science & nanotechnology, Applications of radiation in biology & medical science, Applications of radiation in space, earth, energy & environmental sciences, Applications of radiation in cultural heritage & art and Applications of radiation in industry. In total, 48 papers have been accepted for these proceedings.

The future of urban water services in Latin America.

PubMed

Wade, Jeffry S

2012-01-01

In recent decades, problems with the provision of drinking water and sanitation services around the world have increasingly been addressed by attempts at privatisation, recasting clean water as an essentially economic, rather than public, good. This approach gained particular acceptance in Latin America, but with limited success. In order to address the full range of social, economic and environmental values necessary to sustain water resources over time, public and governmental involvement in establishing integrated water management, pursuing ‘soft path’ approaches, assuring stakeholder input and setting policy will be essential to the process.

Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium Replacement using Low Cost Pulse Current Power Supplies

DTIC Science & Technology

2014-09-10

Cr-Mo, and stainless steel have to some extent found acceptance in various military and commercial CuBe-replacement roles. 1.1.2 Proposed...including low and high strength steels , stainless steel , Inconel and nickel. Figure 4-8 Activation line used to prepare components for nCoP plating...size up to a maximum thickness of 0.012”, can be produced in the tank by electroforming onto a flat stainless steel mandrel and subsequently

Waste treatment in silicon production operations

NASA Technical Reports Server (NTRS)

Coleman, Larry M. (Inventor); Tambo, William (Inventor)

1985-01-01

A battery of special burners, each adapted for the treatment of a particular range of waste material formed during the conversion of metallurgical grade silicon to high purity silane and silicon, is accompanied by a series arrangement of filters to recover fumed silica by-product and a scrubber to recover muriatic acid as another by-product. All of the wastes are processed, during normal and plant upset waste load conditions, to produce useful by-products in an environmentally acceptable manner rather than waste materials having associated handling and disposal problems.

Satellite Power System (SPS) FY 79 program summary

NASA Technical Reports Server (NTRS)

1980-01-01

The Satellite Power System (SPS) program a joint effort to develop an initial understanding of the technical feasibility, the economic practicality, and the social and environmental acceptability of the SPS concept is discussed. This is being accomplished through implementation of the Concept Development and Evaluation Program Plan which is scheduled for completion by the end of FY 1980. This Program Summary not only covers FY 1979 but includes work completed in FY 1977 and FY 1978 in order to give a comprehensive picture of the DOE involvement in the SPS concept development and evaluation process.

Method for converting uranium oxides to uranium metal

DOEpatents

Duerksen, Walter K.

1988-01-01

A process is described for converting scrap and waste uranium oxide to uranium metal. The uranium oxide is sequentially reduced with a suitable reducing agent to a mixture of uranium metal and oxide products. The uranium metal is then converted to uranium hydride and the uranium hydride-containing mixture is then cooled to a temperature less than -100.degree. C. in an inert liquid which renders the uranium hydride ferromagnetic. The uranium hydride is then magnetically separated from the cooled mixture. The separated uranium hydride is readily converted to uranium metal by heating in an inert atmosphere. This process is environmentally acceptable and eliminates the use of hydrogen fluoride as well as the explosive conditions encountered in the previously employed bomb-reduction processes utilized for converting uranium oxides to uranium metal.

Environmental Assurance Program for the Phoenix Mars Mission

NASA Technical Reports Server (NTRS)

Man, Kin F.; Natour, Maher C.; Hoffman, Alan R.

2008-01-01

The Phoenix Mars mission involves delivering a stationary science lander on to the surface of Mars in the polar region within the latitude band 65 deg N to 72 deg N. Its primary objective is to perform in-situ and remote sensing investigations that will characterize the chemistry of the materials at the local surface, subsurface, and atmosphere. The Phoenix spacecraft was launched on August 4, 2007 and will arrive at Mars in May 2008. The lander includes a suite of seven (7) science instruments. This mission is baselined for up to 90 sols (Martian days) of digging, sampling, and analysis. Operating at the Mars polar region creates a challenging environment for the Phoenix landed subsystems and instruments with Mars surface temperature extremes between -120 deg C to 25 deg C and diurnal thermal cycling in excess of 145 deg C. Some engineering and science hardware inside the lander were qualification tested up to 80 deg C to account for self heating. Furthermore, many of the hardware for this mission were inherited from earlier missions: the lander from the Mars Surveyor Program 2001 (MSP'01) and instruments from the MSP'01 and the Mars Polar Lander. Ensuring all the hardware was properly qualified and flight acceptance tested to meet the environments for this mission required defining and implementing an environmental assurance program that included a detailed heritage review coupled with tailored flight acceptance testing. A heritage review process with defined acceptance success criteria was developed and is presented in this paper together with the lessons learned in its implementation. This paper also provides a detailed description of the environmental assurance program of the Phoenix Mars mission. This program includes assembly/subsystem and system level testing in the areas of dynamics, thermal, and electromagnetic compatibility, as well as venting/pressure, dust, radiation, and meteoroid analyses to meet the challenging environment of this mission.

Ensuring Environmentally Sustainable Production of Dedicated Biomass Feedstocks

Treesearch

V.R. Tolbert; D.A. Mays; A. Houston; D.D. Tyler; C.H. Perry; K.E. Brooks; F.C. Thornton; B.R. Bock; J.D. Joslin; Carl C. Trettin; J. Isebrands

2000-01-01

Ensuring acceptance of dedicated biomass feedstocks by landowners, agricultural communities, environmental and public interest groups, requires that the environmental benefits, concerns, and risks associated with their production be quantified. Establishment and management measures to benefit soil and water quality are being identified by ongoing research. Field...

36 CFR 215.6 - Comments on proposed actions.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Environmental Assessment. Comments on the proposed action shall be accepted for 30 days following the date of publication of the legal notice. (ii) Draft Environmental Impact Statement. Comments on the proposed action... period for the opportunity to comment on environmental assessments shall not be extended. (2) Computation...

36 CFR 215.6 - Comments on proposed actions.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Environmental Assessment. Comments on the proposed action shall be accepted for 30 days following the date of publication of the legal notice. (ii) Draft Environmental Impact Statement. Comments on the proposed action... period for the opportunity to comment on environmental assessments shall not be extended. (2) Computation...

36 CFR 215.6 - Comments on proposed actions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Environmental Assessment. Comments on the proposed action shall be accepted for 30 days following the date of publication of the legal notice. (ii) Draft Environmental Impact Statement. Comments on the proposed action... period for the opportunity to comment on environmental assessments shall not be extended. (2) Computation...

36 CFR 215.6 - Comments on proposed actions.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Environmental Assessment. Comments on the proposed action shall be accepted for 30 days following the date of publication of the legal notice. (ii) Draft Environmental Impact Statement. Comments on the proposed action... period for the opportunity to comment on environmental assessments shall not be extended. (2) Computation...

36 CFR 215.6 - Comments on proposed actions.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Environmental Assessment. Comments on the proposed action shall be accepted for 30 days following the date of publication of the legal notice. (ii) Draft Environmental Impact Statement. Comments on the proposed action... period for the opportunity to comment on environmental assessments shall not be extended. (2) Computation...

Beyond positivist ecology: toward an integrated ecological ethics.

PubMed

Norton, Bryan G

2008-12-01

A post-positivist understanding of ecological science and the call for an "ecological ethic" indicate the need for a radically new approach to evaluating environmental change. The positivist view of science cannot capture the essence of environmental sciences because the recent work of "reflexive" ecological modelers shows that this requires a reconceptualization of the way in which values and ecological models interact in scientific process. Reflexive modelers are ecological modelers who believe it is appropriate for ecologists to examine the motives for their choices in developing models; this self-reflexive approach opens the door to a new way of integrating values into public discourse and to a more comprehensive approach to evaluating ecological change. This reflexive building of ecological models is introduced through the transformative simile of Aldo Leopold, which shows that learning to "think like a mountain" involves a shift in both ecological modeling and in values and responsibility. An adequate, interdisciplinary approach to ecological valuation, requires a re-framing of the evaluation questions in entirely new ways, i.e., a review of the current status of interdisciplinary value theory with respect to ecological values reveals that neither of the widely accepted theories of environmental value-neither economic utilitarianism nor intrinsic value theory (environmental ethics)-provides a foundation for an ecologically sensitive evaluation process. Thus, a new, ecologically sensitive, and more comprehensive approach to evaluating ecological change would include an examination of the metaphors that motivate the models used to describe environmental change.

Eco-environmental vulnerability assessment for large drinking water resource: a case study of Qiandao Lake Area, China

NASA Astrophysics Data System (ADS)

Gu, Qing; Li, Jun; Deng, Jinsong; Lin, Yi; Ma, Ligang; Wu, Chaofan; Wang, Ke; Hong, Yang

2015-09-01

The Qiandao Lake Area (QLA) is of great significance in terms of drinking water supply in East Coast China as well as a nationally renowned tourist attraction. A series of laws and regulations regarding the QLA environment have been enacted and implemented throughout the past decade with the aim of negating the harmful effects associated with expanding urbanization and industrialization. In this research, an assessment framework was developed to analyze the eco-environmental vulnerability of the QLA from 1990-2010 by integrating fuzzy analytic hierarchy process (FAHP) and geographical information systems (GIS) in an attempt to gain insights into the status quo of the QLA so as to review and evaluate the effectiveness of the related policies. After processing and analyzing the temporal and spatial variation of eco-environmental vulnerability and major environmental issues in the QLA, we found that the state of eco-environmental vulnerability of the QLA was acceptable, though a moderate deterioration was detected during the study period. Furthermore, analysis of the combination of vulnerability and water quality indicated that the water quality showed signs of declination, though the overall status remained satisfactory. It was hence concluded that the collective protection and treatment actions were effective over the study period, whereas immediately stricter measures would be required for protecting the drinking water quality from domestic sewage and industrial wastewater. Finally, the spatial variation of the eco-environmental vulnerability assessment also implied that specifically more targeted measures should be adopted in respective regions for long-term sustainable development of the QLA.

Radiological Characterization Technical Report on Californium-252 Sealed Source Transuranic Debris Waste for the Off-Site Source Recovery Project at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, Alexander

2014-04-24

This document describes the development and approach for the radiological characterization of Cf-252 sealed sources for shipment to the Waste Isolation Pilot Plant. The report combines information on the nuclear material content of each individual source (mass or activity and date of manufacture) with information and data on the radionuclide distributions within the originating nuclear material. This approach allows for complete and accurate characterization of the waste container without the need to take additional measurements. The radionuclide uncertainties, developed from acceptable knowledge (AK) information regarding the source material, are applied to the summed activities in the drum. The AK informationmore » used in the characterization of Cf-252 sealed sources has been qualified by the peer review process, which has been reviewed and accepted by the Environmental Protection Agency.« less

Effect of pyrolysis temperature on chemical form, behavior and environmental risk of Zn, Pb and Cd in biochar produced from phytoremediation residue.

PubMed

Huang, Hui; Yao, Wenlin; Li, Ronghua; Ali, Amjad; Du, Juan; Guo, Di; Xiao, Ran; Guo, Zhanyu; Zhang, Zengqiang; Awasthi, Mukesh Kumar

2018-02-01

This study aimed to evaluate the chemical forms, behavior and environmental risk of heavy metal (HMs) Zn, Pb and Cd in phytoremediation residue (PMR) pyrolyzed at 350 °C, 550 °C and 750 °C, respectively. The behavior of HMs variation during the PMR pyrolysis process was analyzed and the potential HMs environmental risk of phytoremediation residue biochars (PMB) was assessed which was seldom investigated before. The results showed that the pyrolysis temperature increase decreased the soluble/exchangeable HMs fraction and alleviated the HMs bioavailability. When the temperature was over 550 °C, the adsorbed Zn(II), Pb(II) and Cd(II) were turned into oxides forms and concentrated in PMB with more stable forms exhibiting lower risk assessment code and potential ecological risk index. The ecotoxicity test showed higher pyrolysis temperature favored the reduction of PMB ecotoxicity. It is suggested that pyrolysis temperature above 550°C may be suitable for thermal treatment of PMR with acceptable environmental risk. Copyright © 2017 Elsevier Ltd. All rights reserved.

How Participatory Should Environmental Governance Be? Testing the Applicability of the Vroom-Yetton-Jago Model in Public Environmental Decision-Making

NASA Astrophysics Data System (ADS)

Lührs, Nikolas; Jager, Nicolas W.; Challies, Edward; Newig, Jens

2018-02-01

Public participation is potentially useful to improve public environmental decision-making and management processes. In corporate management, the Vroom-Yetton-Jago normative decision-making model has served as a tool to help managers choose appropriate degrees of subordinate participation for effective decision-making given varying decision-making contexts. But does the model recommend participatory mechanisms that would actually benefit environmental management? This study empirically tests the improved Vroom-Jago version of the model in the public environmental decision-making context. To this end, the key variables of the Vroom-Jago model are operationalized and adapted to a public environmental governance context. The model is tested using data from a meta-analysis of 241 published cases of public environmental decision-making, yielding three main sets of findings: (1) The Vroom-Jago model proves limited in its applicability to public environmental governance due to limited variance in its recommendations. We show that adjustments to key model equations make it more likely to produce meaningful recommendations. (2) We find that in most of the studied cases, public environmental managers (implicitly) employ levels of participation close to those that would have been recommended by the model. (3) An ANOVA revealed that such cases, which conform to model recommendations, generally perform better on stakeholder acceptance and environmental standards of outputs than those that diverge from the model. Public environmental management thus benefits from carefully selected and context-sensitive modes of participation.

How Participatory Should Environmental Governance Be? Testing the Applicability of the Vroom-Yetton-Jago Model in Public Environmental Decision-Making.

PubMed

Lührs, Nikolas; Jager, Nicolas W; Challies, Edward; Newig, Jens

2018-02-01

Public participation is potentially useful to improve public environmental decision-making and management processes. In corporate management, the Vroom-Yetton-Jago normative decision-making model has served as a tool to help managers choose appropriate degrees of subordinate participation for effective decision-making given varying decision-making contexts. But does the model recommend participatory mechanisms that would actually benefit environmental management? This study empirically tests the improved Vroom-Jago version of the model in the public environmental decision-making context. To this end, the key variables of the Vroom-Jago model are operationalized and adapted to a public environmental governance context. The model is tested using data from a meta-analysis of 241 published cases of public environmental decision-making, yielding three main sets of findings: (1) The Vroom-Jago model proves limited in its applicability to public environmental governance due to limited variance in its recommendations. We show that adjustments to key model equations make it more likely to produce meaningful recommendations. (2) We find that in most of the studied cases, public environmental managers (implicitly) employ levels of participation close to those that would have been recommended by the model. (3) An ANOVA revealed that such cases, which conform to model recommendations, generally perform better on stakeholder acceptance and environmental standards of outputs than those that diverge from the model. Public environmental management thus benefits from carefully selected and context-sensitive modes of participation.

10 CFR 51.108 - Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria...

Code of Federal Regulations, 2010 CFR

2010-01-01

... CFR 52.103(b), the Commission will not admit any contentions on environmental issues, the adequacy of... NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations Implementing Section 102(2...

76 FR 52656 - Rhode Island Department of Environmental Management; Notice of Preliminary Permit Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 14211-000] Rhode Island Department of Environmental Management; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments, Motions To Intervene, and Competing Applications On June 10, 2011, the Rhode Island Department of Environmental Management...

49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

Code of Federal Regulations, 2012 CFR

2012-10-01

... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

Code of Federal Regulations, 2013 CFR

2013-10-01

... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

Code of Federal Regulations, 2014 CFR

2014-10-01

... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, TEST REPORT OF MOBILE SOURCE EMISSION CONTROL DEVICES: MITSUI ENGINEERING & SHIPBUILDING DIESEL PARTICULATE FILTER

EPA Science Inventory

EPA‘s Environmental Technology Verification program is designed to further environmental protection by accelerating the acceptance and use of improved and cost effective technologies. This is done by providing high-quality, peer reviewed data on technology performance to those in...

Consumer Acceptability of Cucumber Pickles Produced by Fermentation in Calcium Chloride Brine for Reduced Environmental Impact.

PubMed

Wilson, Emily M; Johanningsmeier, Suzanne D; Osborne, Jason A

2015-06-01

Fermentation of cucumbers in calcium chloride (CaCl2 ) brine has been proposed as an alternative process to reduce the environmental impact of traditional, high salt fermentations. The objective of this research was to determine whether consumer acceptability of pickle products would be impacted by fermentation and storage of cucumbers in CaCl2 brine. Cucumbers were fermented and stored with 0.1M CaCl2 or 1M sodium chloride (NaCl) in open-air, 3000 gal tanks at a commercial facility and processed into hamburger dill chips containing 0.38M NaCl. Cucumbers fermented in CaCl2 required additional desalting to reduce CaCl2 concentrations to that of current products. Consumers (n = 101) showed no significant preference for pickles from different fermentation treatments, whether stored for 2 mo (P = 0.75) or 8 mo (P = 0.68) prior to processing. In contrast, NaCl fermented pickles were preferred over CaCl2 fermented pickles stored for 10 mo and desalted only once (P < 0.01). A series of preference tests indicated that the taste of CaCl2 was not the factor affecting consumer preference, and the 50% detection threshold of CaCl2 in dill pickle chips was found to be 61.8 ± 7.6 mM, indicating that processors could potentially use CaCl2 fermentations with a single desalting step. Consumer liking of flavor (n = 73) was not influenced by fermentation in CaCl2 or by 23 or 35 mM CaCl2 in finished products (P > 0.05), but variability in texture decreased consumer liking (P < 0.05). Although promising, individual fermentation variability and texture quality of CaCl2 fermented products should be further evaluated prior to broad implementation of this process. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

40 CFR 600.007 - Vehicle acceptability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... a different maximum value for electric vehicles, plug-in hybrid electric vehicles, and fuel cell... 600.007 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL... Administrator will judge the acceptability of a fuel economy data vehicle on the basis of the information...

40 CFR 600.007 - Vehicle acceptability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... a different maximum value for electric vehicles, plug-in hybrid electric vehicles, and fuel cell... 600.007 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL... Administrator will judge the acceptability of a fuel economy data vehicle on the basis of the information...

40 CFR 600.007 - Vehicle acceptability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... a different maximum value for electric vehicles, plug-in hybrid electric vehicles, and fuel cell... 600.007 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL... Administrator will judge the acceptability of a fuel economy data vehicle on the basis of the information...

Public participation in strategic environmental assessment (SEA): Critical review and the Quebec (Canada) approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauthier, Mario, E-mail: mario.gauthier@uqo.c; Simard, Louis, E-mail: lsimard@uottawa.c; Waaub, Jean-Philippe, E-mail: waaub.jean-philippe@uqam.c

2011-01-15

It is widely accepted that public participation must be a part of strategic environmental assessment (SEA) procedures, and yet few studies have been conducted on the implementation of SEA public participation procedures. Accordingly, the theoretical and practical aspects of public participation in SEA remain research priorities for environmental policy-making. This paper presents a review of the Quebec (Canada) model of public participation in SEA through an evaluation of six public hearings on proposed directions and policies concerning, respectively, hazardous waste, forest protection, residual materials, energy, water management and pig farming. First, the authors examine the theoretical dimensions of SEA andmore » public participation in the process. Second, they give a summary of the lessons that can be learned from the few Canadian and international experiences. Third, they outline the Quebec experience. Finally, they conclude by evaluating the opportunities and limitations of the Quebec experience and make some recommendations to improve its application.« less

Chlorophyll derivatives for pest and disease control: Are they safe?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azizullah, Azizullah, E-mail: azizswabi@gmail.com; Murad, Waheed

2015-01-15

Chlorophyll derivatives are getting widespread acceptance among the researchers as natural photosensitizers for photodynamic control of pests and disease vectors; however, rare attention has been given to evaluation of their toxicity to non-target organisms in the environment. This perspective article highlights that chlorophyll derivatives may not be as safe as believed and can possibly pose risk to non-target organisms in the environment. We invite the attention of environmental biologists, particularly ecotoxicologists, to contribute their role in making the application of chlorophyll derivatives more environmentally friendly and publicly acceptable.

International Space Station Environmental Control and Life Support System Acceptance Testing for the Pressurized Mating Adapters

NASA Technical Reports Server (NTRS)

Williams, David E.

2008-01-01

The International Space Station (ISS) Pressurized Mating Adapters (PMAs) Environmental Control and Life Support (ECLS) System is comprised of three subsystems: Atmosphere Control and Supply (ACS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). PMAs 1 and 2 flew to ISS on Flight 2A and Pressurized Mating Adapter (PMA) 3 flew to ISS on Flight 3A. This paper provides a summary of the PMAs ECLS design and a detailed discussion of the ISS ECLS Acceptance Testing methodologies utilized for the PMAs.

Acceptable knowledge document for INEEL stored transuranic waste -- Rocky Flats Plant waste. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-01-23

This document and supporting documentation provide a consistent, defensible, and auditable record of acceptable knowledge for waste generated at the Rocky Flats Plant which is currently in the accessible storage inventory at the Idaho National Engineering and Environmental Laboratory. The inventory consists of transuranic (TRU) waste generated from 1972 through 1989. Regulations authorize waste generators and treatment, storage, and disposal facilities to use acceptable knowledge in appropriate circumstances to make hazardous waste determinations. Acceptable knowledge includes information relating to plant history, process operations, and waste management, in addition to waste-specific data generated prior to the effective date of the RCRAmore » regulations. This document is organized to provide the reader a comprehensive presentation of the TRU waste inventory ranging from descriptions of the historical plant operations that generated and managed the waste to specific information about the composition of each waste group. Section 2 lists the requirements that dictate and direct TRU waste characterization and authorize the use of the acceptable knowledge approach. In addition to defining the TRU waste inventory, Section 3 summarizes the historical operations, waste management, characterization, and certification activities associated with the inventory. Sections 5.0 through 26.0 describe the waste groups in the inventory including waste generation, waste packaging, and waste characterization. This document includes an expanded discussion for each waste group of potential radionuclide contaminants, in addition to other physical properties and interferences that could potentially impact radioassay systems.« less

37 CFR 104.12 - Acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OFFICE, DEPARTMENT OF COMMERCE ADMINISTRATION LEGAL PROCESSES Service of Process § 104.12 Acceptance of service of process. (a) Any summons and complaint to be served in person or by registered or certified...). (f) The Office will only accept service of process for an employee in the employee's official...

Technical specifications for mechanical recycling of agricultural plastic waste.

PubMed

Briassoulis, D; Hiskakis, M; Babou, E

2013-06-01

Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project "LabelAgriWaste" revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process ("Quality I") and another one for plastic profile production process ("Quality II"). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW. Copyright © 2013 Elsevier Ltd. All rights reserved.

Implementing participatory decision making in forest planning.

PubMed

Ananda, Jayanath

2007-04-01

Forest policy decisions are often a source of debate, conflict, and tension in many countries. The debate over forest land-use decisions often hinges on disagreements about societal values related to forest resource use. Disagreements on social value positions are fought out repeatedly at local, regional, national, and international levels at an enormous social cost. Forest policy problems have some inherent characteristics that make them more difficult to deal with. On the one hand, forest policy decisions involve uncertainty, long time scales, and complex natural systems and processes. On the other hand, such decisions encompass social, political, and cultural systems that are evolving in response to forces such as globalization. Until recently, forest policy was heavily influenced by the scientific community and various economic models of optimal resource use. However, growing environmental awareness and acceptance of participatory democracy models in policy formulation have forced the public authorities to introduce new participatory mechanisms to manage forest resources. Most often, the efforts to include the public in policy formulation can be described using the lower rungs of Arnstein's public participation typology. This paper presents an approach that incorporates stakeholder preferences into forest land-use policy using the Analytic Hierarchy Process (AHP). An illustrative case of regional forest-policy formulation in Australia is used to demonstrate the approach. It is contended that applying the AHP in the policy process could considerably enhance the transparency of participatory process and public acceptance of policy decisions.

15 CFR 15.3 - Acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Acceptance of service of process. 15.3... Process § 15.3 Acceptance of service of process. (a) Except as otherwise provided in this subpart, any... employee by law is to be served personally with process. Service of process in this case is inadequate when...

Re-engineering the Federal planning process: A total Federal planning strategy, integrating NEPA with modern management tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eccleston, C.H.

1997-09-05

The National Environmental Policy Act (NEPA) of 1969 was established by Congress more than a quarter of a century ago, yet there is a surprising lack of specific tools, techniques, and methodologies for effectively implementing these regulatory requirements. Lack of professionally accepted techniques is a principal factor responsible for many inefficiencies. Often, decision makers do not fully appreciate or capitalize on the true potential which NEPA provides as a platform for planning future actions. New approaches and modem management tools must be adopted to fully achieve NEPA`s mandate. A new strategy, referred to as Total Federal Planning, is proposed formore » unifying large-scale federal planning efforts under a single, systematic, structured, and holistic process. Under this approach, the NEPA planning process provides a unifying framework for integrating all early environmental and nonenvironmental decision-making factors into a single comprehensive planning process. To promote effectiveness and efficiency, modem tools and principles from the disciplines of Value Engineering, Systems Engineering, and Total Quality Management are incorporated. Properly integrated and implemented, these planning tools provide the rigorous, structured, and disciplined framework essential in achieving effective planning. Ultimately, the goal of a Total Federal Planning strategy is to construct a unified and interdisciplinary framework that substantially improves decision-making, while reducing the time, cost, redundancy, and effort necessary to comply with environmental and other planning requirements. At a time when Congress is striving to re-engineer the governmental framework, apparatus, and process, a Total Federal Planning philosophy offers a systematic approach for uniting the disjointed and often convoluted planning process currently used by most federal agencies. Potentially this approach has widespread implications in the way federal planning is approached.« less

Secondary Waste Cast Stone Waste Form Qualification Testing Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westsik, Joseph H.; Serne, R. Jeffrey

2012-09-26

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone – a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptablemore » for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF« less

Cost-oriented evaluation of ecosystem services under consideration of income risks and risk attitudes of farmers.

PubMed

Dörschner, T; Musshoff, O

2013-09-30

Agri-environmental measures are often not as accepted among farmers as is expected. The present study investigates whether changes in income risks and the individual risk attitudes of farmers may constitute an explanatory approach for the low acceptance of the measures. For this purpose, a normative model is developed that calculates the premia claimed by the farmers for adopting environmental measures under the consideration of income risks and different risk attitudes. We apply this model to environmental measures aiming at an increase of the faunistic diversity of species on grassland and showing that changes in income risks and the decision makers' risk attitudes can significantly influence farmers' minimum compensation claims. Copyright © 2013 Elsevier Ltd. All rights reserved.

Scientific Assessment of Stratospheric Ozone: 1989, volume 2. Appendix: AFEAS Report

NASA Technical Reports Server (NTRS)

1990-01-01

The results are presented of the Alternative Fluorocarbon Environmental Acceptability Study (AFEAS), which was organized to evaluate the potential effects on the environment of alternate compounds targeted to replace fully halogenated chlorofluorocarbons (CFCs). All relevant current scientific information to determine the environmental acceptability of the alternative fluorocarbons. Special emphasis was placed on: the potential of the compounds to affect stratospheric ozone; their potential to affect tropospheric ozone; their potential to contribute to model calculated global warming; the atmospheric degradation mechanisms of the compounds, in order to identify their products; and the potential environmental effects of the decomposition products. The alternative compounds to be studied were hydrofluorocarbons (HFCs) with one or two carbon atoms and one or more each of fluorine and hydrogen.

Performance Evaluation Tests for Environmental Research (PETER): evaluation of 114 measures

NASA Technical Reports Server (NTRS)

Bittner, A. C. Jr; Carter, R. C.; Kennedy, R. S.; Harbeson, M. M.; Krause, M.

1986-01-01

The goal of the Performance Evaluation Tests for Environmental Research (PETER) Program was to identify a set of measures of human capabilities for use in the study of environmental and other time-course effects. 114 measures studied in the PETER Program were evaluated and categorized into four groups based upon task stability and task definition. The Recommended category contained 30 measures that clearly obtained total stabilization and had an acceptable level of reliability efficiency. The Acceptable-But-Redundant category contained 15 measures. The 37 measures in the Marginal category, which included an inordinate number of slope and other derived measures, usually had desirable features which were outweighed by faults. The 32 measures in the Unacceptable category had either differential instability or weak reliability efficiency. It is our opinion that the 30 measures in the Recommended category should be given first consideration for environmental research applications. Further, it is recommended that information pertaining to preexperimental practice requirements and stabilized reliabilities should be utilized in repeated-measures environmental studies.

Public Acceptability in the UK and USA of Nudging to Reduce Obesity: The Example of Reducing Sugar-Sweetened Beverages Consumption.

PubMed

Petrescu, Dragos C; Hollands, Gareth J; Couturier, Dominique-Laurent; Ng, Yin-Lam; Marteau, Theresa M

2016-01-01

"Nudging"-modifying environments to change people's behavior, often without their conscious awareness-can improve health, but public acceptability of nudging is largely unknown. We compared acceptability, in the United Kingdom (UK) and the United States of America (USA), of government interventions to reduce consumption of sugar-sweetened beverages. Three nudge interventions were assessed: i. reducing portion Size, ii. changing the Shape of the drink containers, iii. changing their shelf Location; alongside two traditional interventions: iv. Taxation and v. Education. We also tested the hypothesis that describing interventions as working through non-conscious processes decreases their acceptability. Predictors of acceptability, including perceived intervention effectiveness, were also assessed. Participants (n = 1093 UK and n = 1082 USA) received a description of each of the five interventions which varied, by randomisation, in how the interventions were said to affect behaviour: (a) via conscious processes; (b) via non-conscious processes; or (c) no process stated. Acceptability was derived from responses to three items. Levels of acceptability for four of the five interventions did not differ significantly between the UK and US samples; reducing portion size was less accepted by the US sample. Within each country, Education was rated as most acceptable and Taxation the least, with the three nudge-type interventions rated between these. There was no evidence to support the study hypothesis: i.e. stating that interventions worked via non-conscious processes did not decrease their acceptability in either the UK or US samples. Perceived effectiveness was the strongest predictor of acceptability for all interventions across the two samples. In conclusion, nudge interventions to reduce consumption of sugar-sweetened beverages seem similarly acceptable in the UK and USA, being more acceptable than taxation, but less acceptable than education. Contrary to prediction, we found no evidence that highlighting the non-conscious processes by which nudge interventions may work decreases their acceptability. However, highlighting the effectiveness of all interventions has the potential to increase their acceptability.

Environmental Control and Life Support Systems Testing Facility at MSFC

NASA Technical Reports Server (NTRS)

2001-01-01

The Marshall Space Flight Center (MSFC) is responsible for designing and building the life support systems that will provide the crew of the International Space Station (ISS) a comfortable environment in which to live and work. Scientists and engineers at the MSFC are working together to provide the ISS with systems that are safe, efficient, and cost-effective. These compact and powerful systems are collectively called the Environmental Control and Life Support Systems, or simply, ECLSS. This photograph shows the fifth generation Urine Processor Development Hardware. The Urine Processor Assembly (UPA) is a part of the Water Recovery System (WRS) on the ISS. It uses a chase change process called vapor compression distillation technology to remove contaminants from urine. The UPA accepts and processes pretreated crewmember urine to allow it to be processed along with other wastewaters in the Water Processor Assembly (WPA). The WPA removes free gas, organic, and nonorganic constituents before the water goes through a series of multifiltration beds for further purification. Product water quality is monitored primarily through conductivity measurements. Unacceptable water is sent back through the WPA for reprocessing. Clean water is sent to a storage tank.

A review of the technological solutions for the treatment of oily sludges from petroleum refineries.

PubMed

da Silva, Leonardo Jordão; Alves, Flávia Chaves; de França, Francisca Pessôa

2012-10-01

The activities of the oil industry have several impacts on the environment due to the large amounts of oily wastes that are generated. The oily sludges are a semi-solid material composed by a mixture of clay, silica and iron oxides contaminated with oil, produced water and the chemicals used in the production of oil. Nowadays both the treatment and management of these waste materials is essential to promote sustainable management of exploration and exploitation of natural resources. Biological, physical and chemical processes can be used to reduce environmental contamination by petroleum hydrocarbons to acceptable levels. The choice of treatment method depends on the physical and chemical properties of the waste as well as the availability of facilities to process these wastes. Literature provides some operations for treatment of oily sludges, such as landfilling, incineration, co-processing in clinkerization furnaces, microwave liquefaction, centrifugation, destructive distillation, thermal plasma, low-temperature conversion, incorporation in ceramic materials, development of impermeable materials, encapsulation and biodegradation in land farming, biopiles and bioreactors. The management of the technology to be applied for the treatment of oily wastes is essential to promote proper environmental management, and provide alternative methods to reduce, reuse and recycle the wastes.

Important features of Sustainable Aggregate Resource Management

USGS Publications Warehouse

Solar, Slavko V.; Shields, Deborah J.; Langer, William H.

2004-01-01

Every society, whether developed, developing or in a phase of renewal following governmental change, requires stable, adequate and secure supplies of natural resources. In the latter case, there could be significant need for construction materials for rebuilding infrastructure, industrial capacity, and housing. It is essential that these large-volume materials be provided in a rational manner that maximizes their societal contribution and minimizes environmental impacts. We describe an approach to resource management based on the principles of sustainable developed. Sustainable Aggregate Resource Management offers a way of addressing the conflicting needs and interests of environmental, economic, and social systems. Sustainability is an ethics based concept that utilizes science and democratic processes to reach acceptable agreements and tradeoffs among interests, while acknowledging the fundamental importance of the environment and social goods. We discuss the features of sustainable aggregate resource management.

Social Norms and Global Environmental Challenges: The Complex Interaction of Behaviors, Values, and Policy

PubMed Central

Ehrlich, Paul R.; Alston, Lee J.; Arrow, Kenneth; Barrett, Scott; Buchman, Timothy G.; Daily, Gretchen C.; Levin, Bruce; Levin, Simon; Oppenheimer, Michael; Ostrom, Elinor; Saari, Donald

2014-01-01

SUMMARY Government policies are needed when people’s behaviors fail to deliver the public good. Those policies will be most effective if they can stimulate long-term changes in beliefs and norms, creating and reinforcing the behaviors needed to solidify and extend the public good.It is often the short-term acceptability of potential policies, rather than their longer-term efficacy, that determines their scope and deployment. The policy process should consider both time scales. The academy, however, has provided insufficient insight on the coevolution of social norms and different policy instruments, thus compromising the capacity of decision makers to craft effective solutions to the society’s most intractable environmental problems. Life scientists could make fundamental contributions to this agenda through targeted research on the emergence of social norms. PMID:25143635

Total Ni-Cd battery recycling by INMETCO U.S.A.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanewald, R.H.; McComas, D.M.; Onuska, J.C. Jr.

1997-12-31

The processing and recycling of various batteries has been occurring at INMETCO (a wholly owned subsidiary of Inco Ltd.) since the early 1980`s. Due to changing environmental regulations, INMETCO`s spent nickel-cadmium (Ni-Cd) and nickel metal hydride (Ni-MH) battery recycling has steadily grown since 1990. INMETCO`s new Cadmium Recovery Operation will be discussed along with its unique ability to recycle/reuse 100% of the battery components on site. Start up results, along with actual cadmium analysis, as well as actual air and water environmental impact will be highlighted. INMETCO has been, and continues to be, the major recycler of stainless steel by-products,more » both hazardous and non-hazardous, back into a stainless steel remelt alloy which is accepted in North America, Europe, and Japan.« less

Case Study: Advances in Modelling Exposure

EPA Science Inventory

Concerned about the health impacts of air pollution. many environmental agencies around the world are implementing regulations to reduce emissions from various sectors, thus maintaining ambient air quality at acceptable levels. The United States Environmental Protection Agency (E...

Designing Base and Subbase to Resist Environmental Effects on Pavements

DOT National Transportation Integrated Search

2018-02-02

MnDOTs current pavement thickness design procedures do not characterize the effects of subgrade soil frost susceptibility. Previous research indicates frost action is the most severe environmental factor on pavement performance. The most accepted ...

Teaching a Cross-Disciplinary Environmental Science, Policy, and Culture Course on Costa Rica's Ecotourism to Business Students

ERIC Educational Resources Information Center

Lester, Toni; Rodgers, Vikki L.

2012-01-01

Within the business world, there is growing evidence and increasing acceptance that sustainability and environmental practices are the main drivers for current innovation and success. We developed an interdisciplinary, offshore course where undergraduate business students could truly investigate and experience the benefits of environmentally and…

Diversity and Equity in Environmental Organizations: The Salience of These Factors to Students

ERIC Educational Resources Information Center

Taylor, Dorceta E.

2007-01-01

Diversity in environmental institutions is of increasing concern to scholars and practitioners. The author examined student perceptions of the importance of 20 diversity and equity factors in their decisions to accept a job. A national sample of 1,239 students in 9 environmental disciplines (biological sciences, geosciences, natural resources,…

Cradle-to-grave life cycle assessment of syngas electricity from woody biomass residues

Treesearch

Hongmei Gu; Richard Bergman

2017-01-01

Forest restoration and fire suppression activities in the western United States have resulted in large volumes of low-to-no value residues. An environmental assessment would enable greater use while maintaining environmental sustainability of these residues for energy products. One internationally accepted sustainable metric tool that can assess environmental impacts...

Educational Reflections on the "Ecological Crisis": EcoJustice, Environmentalism, and Sustainability

ERIC Educational Resources Information Center

Mueller, Michael P.

2009-01-01

There is a tendency by scholars arguing for a more just and sustainable future to position the "ecological crisis" as a fundamental reason for major educational reforms. Relying on crisis-talk to fuel social and environmental justice and environmentalism reinforces the thinking of the past, which inadvertently perpetuates the acceptance of present…

Meeting the challenge of policy-relevant science: lessons from a water resource project

USGS Publications Warehouse

Lamb, Berton L.

1986-01-01

Water resource scientists face complex tasks in evaluating aspects of water projects, but relatively few assessment procedures have been applied and accepted as standard applications. Decision-makers often rely on environmental assessments to evaluate the value and operation of projects. There is often confusion about scientists' role in policy decisions. The scientist can affect policy-making as an expert withess, an advocate or a surrogate. By understanding the policy process, scientists can make their work more “policy relevant.” Using the Terror Lake hydro project in Alaska as a guide, three lessons are discussed: (1) not all problems are able to be solved with technology; (2) policy-relevant technology is rarely imposed on a problem; and (3) the scientist need not just react to the policy process, but can have an impact on how that process unfolds.

A Technique for Transient Thermal Testing of Thick Structures

NASA Technical Reports Server (NTRS)

Horn, Thomas J.; Richards, W. Lance; Gong, Leslie

1997-01-01

A new open-loop heat flux control technique has been developed to conduct transient thermal testing of thick, thermally-conductive aerospace structures. This technique uses calibration of the radiant heater system power level as a function of heat flux, predicted aerodynamic heat flux, and the properties of an instrumented test article. An iterative process was used to generate open-loop heater power profiles prior to each transient thermal test. Differences between the measured and predicted surface temperatures were used to refine the heater power level command profiles through the iteration process. This iteration process has reduced the effects of environmental and test system design factors, which are normally compensated for by closed-loop temperature control, to acceptable levels. The final revised heater power profiles resulted in measured temperature time histories which deviated less than 25 F from the predicted surface temperatures.

48 CFR 15.101-2 - Lowest price technically acceptable source selection process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Lowest price technically acceptable source selection process. 15.101-2 Section 15.101-2 Federal Acquisition Regulations System FEDERAL... Processes and Techniques 15.101-2 Lowest price technically acceptable source selection process. (a) The...

Agile based "Semi-"Automated Data ingest process : ORNL DAAC example

NASA Astrophysics Data System (ADS)

Santhana Vannan, S. K.; Beaty, T.; Cook, R. B.; Devarakonda, R.; Hook, L.; Wei, Y.; Wright, D.

2015-12-01

The ORNL DAAC archives and publishes data and information relevant to biogeochemical, ecological, and environmental processes. The data archived at the ORNL DAAC must be well formatted, self-descriptive, and documented, as well as referenced in a peer-reviewed publication. The ORNL DAAC ingest team curates diverse data sets from multiple data providers simultaneously. To streamline the ingest process, the data set submission process at the ORNL DAAC has been recently updated to use an agile process and a semi-automated workflow system has been developed to provide a consistent data provider experience and to create a uniform data product. The goals of semi-automated agile ingest process are to: 1.Provide the ability to track a data set from acceptance to publication 2. Automate steps that can be automated to improve efficiencies and reduce redundancy 3.Update legacy ingest infrastructure 4.Provide a centralized system to manage the various aspects of ingest. This talk will cover the agile methodology, workflow, and tools developed through this system.

Geostatistical applications in environmental remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, R.N.; Purucker, S.T.; Lyon, B.F.

1995-02-01

Geostatistical analysis refers to a collection of statistical methods for addressing data that vary in space. By incorporating spatial information into the analysis, geostatistics has advantages over traditional statistical analysis for problems with a spatial context. Geostatistics has a history of success in earth science applications, and its popularity is increasing in other areas, including environmental remediation. Due to recent advances in computer technology, geostatistical algorithms can be executed at a speed comparable to many standard statistical software packages. When used responsibly, geostatistics is a systematic and defensible tool can be used in various decision frameworks, such as the Datamore » Quality Objectives (DQO) process. At every point in the site, geostatistics can estimate both the concentration level and the probability or risk of exceeding a given value. Using these probability maps can assist in identifying clean-up zones. Given any decision threshold and an acceptable level of risk, the probability maps identify those areas that are estimated to be above or below the acceptable risk. Those areas that are above the threshold are of the most concern with regard to remediation. In addition to estimating clean-up zones, geostatistics can assist in designing cost-effective secondary sampling schemes. Those areas of the probability map with high levels of estimated uncertainty are areas where more secondary sampling should occur. In addition, geostatistics has the ability to incorporate soft data directly into the analysis. These data include historical records, a highly correlated secondary contaminant, or expert judgment. The role of geostatistics in environmental remediation is a tool that in conjunction with other methods can provide a common forum for building consensus.« less

Human annoyance, acceptability and concern as responses to vibration from the construction of Light Rapid Transit lines in residential environments.

PubMed

Wong-McSweeney, D; Woodcock, J S; Peris, E; Waddington, D C; Moorhouse, A T; Redel-Macías, M D

2016-10-15

The aim of this paper is to investigate the use of different self-reported measures for assessing the human response to environmental vibration from the construction of an urban LRT (Light Rapid Transit) system. The human response to environmental stressors such as vibration and noise is often expressed in terms of exposure-response relationships that describe annoyance as a function of the magnitude of the vibration. These relationships are often the basis of noise and vibration policy and the setting of limit values. This paper examines measures other than annoyance by expressing exposure-response relationships for vibration in terms of self-reported concern about property damage and acceptability. The exposure-response relationships for concern about property damage and for acceptability are then compared with those for annoyance. It is shown that concern about property damage occurs at vibration levels well below those where there is any risk of damage. Earlier research indicated that concern for damage is an important moderator of the annoyance induced. Acceptability, on the other hand, might be influenced by both annoyance and concern, as well as by other considerations. It is concluded that exposure-response relationships expressing acceptability as a function of vibration exposure could usefully complement existing relationships for annoyance in future policy decisions regarding environmental vibration. The results presented in this paper are derived from data collected through a socio-vibration survey (N=321) conducted for the construction of an urban LRT in the United Kingdom. Copyright © 2016. Published by Elsevier B.V.

Issues in Assessing Environmental Exposures to Manufactured Nanomaterials

PubMed Central

Loux, Nicholas T.; Su, Yee San; Hassan, Sayed M.

2011-01-01

Manufactured nanomaterials (MNs) are commonly considered to be commercial products possessing at least one dimension in the size range of 10−9 m to 10−7 m. As particles in this size range represent the smaller fraction of colloidal particles characterized by dimensions of 10−9 m to 10−6 m, they differ from both molecular species and bulk particulate matter in the sense that they are unlikely to exhibit significant settling under normal gravitational conditions and they are also likely to exhibit significantly diminished diffusivities (when compared to truly dissolved species) in environmental media. As air/water, air/soil, and water/soil intermedium transport is governed by diffusive processes in the absence of significant gravitational and inertial impaction processes in environmental systems, models of MN environmental intermedium transport behavior will likely require an emphasis on kinetic approaches. This review focuses on the likely environmental fate and transport of MNs in atmospheric and aquatic systems. Should significant atmospheric MNs emission occur, previous observations suggest that MNs may likely exhibit an atmospheric residence time of ten to twenty days. Moreover, while atmospheric MN aggregates in a size range of 10−7 m to 10−6 m will likely be most mobile, they are least likely to deposit in the human respiratory system. An examination of various procedures including the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloidal particle suspension stability in water indicates that more sophisticated approaches may be necessary in order to develop aquatic exposure models of acceptable uncertainty. In addition, concepts such as Critical Coagulation Concentrations and Critical Zeta Potentials may prove to be quite useful in environmental aquatic exposure assessments. PMID:22016703

77 FR 25995 - Western Technical College; Notice of Application Accepted for Filing With the Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

... Technical College; Notice of Application Accepted for Filing With the Commission, Soliciting Motions To Intervene and Protests, Ready for Environmental Analysis, Intent To Waive Scoping, Soliciting Comments....: 13417-002. c. Date filed: October 21, 2011. d. Applicant: Western Technical College. e. Name of Project...

Improved harvesting systems for wet sites

Treesearch

Bryce J. Stokes; Alvin Schilling

1997-01-01

Environmentally acceptable and economical forest operations are needed for sustainable management of forest resources. Improved methods for harvesting and transporting timber are especially needed for wet sites. As the demand for hardwood lumber continues to increase, improved and alternative methods are needed to ensure acceptance of timber harvesting for the wet site...

40 CFR 35.917-6 - Acceptance by implementing governmental units.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Acceptance by implementing governmental units. 35.917-6 Section 35.917-6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean...

WHEN HAS A MODEL BEEN SUFFICIENTLY CALIBRATED AND TESTED TO BE PUT TO EFFICIENT USE?

EPA Science Inventory

The question of what degree of predictive error is acceptable for environmental models is explored. Two schools of thought are presented. The universalist school would argue that it is possible to agree on general acceptance criteria for specific categories of models, particula...

40 CFR 205.57-7 - Acceptance and rejection of batch sequence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Acceptance and rejection of batch sequence. 205.57-7 Section 205.57-7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205...

40 CFR 205.57-6 - Acceptance and rejection of batches.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Acceptance and rejection of batches. 205.57-6 Section 205.57-6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.57-6...

40 CFR 600.009 - Hearing on acceptance of test data.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Hearing on acceptance of test data. 600.009 Section 600.009 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General Provisions § 600.009...

40 CFR 600.009 - Hearing on acceptance of test data.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Hearing on acceptance of test data. 600.009 Section 600.009 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General Provisions § 600.009...

40 CFR 600.009 - Hearing on acceptance of test data.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Hearing on acceptance of test data. 600.009 Section 600.009 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General Provisions § 600.009...

Quinoa bitterness: causes and solutions for improving product acceptability.

PubMed

Suárez-Estrella, Diego; Torri, Luisa; Pagani, Maria Ambrogina; Marti, Alessandra

2018-02-27

Awareness of the several agronomic, environmental, and health benefits of quinoa has led to a constant increase in its production and consumption not only in South America, where it is a native crop, but also in Europe and the USA. However, producing wheat or gluten-free based products enriched with quinoa alters some quality characteristics, including sensory acceptance. Several anti-nutritional factors such as saponins are concentrated in the grain pericarp. These bitter and astringent substances may interfere with the digestion and absorption of various nutrients. Developing processes to decrease or modify the bitterness of quinoa can enhance palatability, and thus consumption, of quinoa. In addition to the production of sweet varieties of quinoa, other processes have been proposed. Some of them (i.e. washing, pearling and the combination of the two) have a direct effect on saponins, either by solubilization and/or the mechanical removal of seed layers. Others, such as fermentation or germination, are able to mask the bitterness with aroma compounds and/or sugar formation. This review presents the major sources of the undesirable sensory attributes of quinoa, including bitterness, and various ways of counteracting the negative characteristics of quinoa. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, F. G.; Daniels, E. J.

This report summarizes an assessment conducted by Environmental Technologies Alternatives, Inc., under a subcontract to Argonne National Laboratory. The project was conducted in two phases. An assessment of alternative technologies for recycling of prompt non-tire rubber was conducted in the first phase, and an experimental program focusing on a new technology called the catalytic Regeneration Process offered the greatest opportunity for recovery of high-value recyclable rubber material. An experimental and large-scale test program was undertaken to further delineate the economic potential as an essential step leading to commercial deployment and to determine the course of continued development of the technologymore » by the private sector. The experimental program defined process-operating conditions for the technology and verified the degree of devulcanisation achievable for two rubber compounds: ethylene-propylene-nonconjugated-diene monomer (EPDM) and neoprene. To determine product acceptance, samples of devulcanized EPDM and neoprene were prepared and used in factory trials for the production of automotive moldings (EPDM) and fiber-filled belting (neoprene). The factory trials indicated that the physical properties of the products were acceptable in both cases. The appearance of molded and calendared surface finishes was acceptable, while that of extruded finishes was unsatisfactory. The fiber-filled neoprene belting application offers the greatest economic potential. Process costs were estimated at $0.34/lb for neoprene waste rubber relative to a value of $0.57/lb. The results of the experimental program led to the decision to continue development of this technology is being planned, subject to the availability of about $3 million in financing from private-sector investors. The ability to recycle non-tire rubber scrap could conserve as much as 90,000 Btu/lb, thus yielding an estimated energy savings potential of about 0.25 quad/yr.« less

Comparative research on NIMBY risk acceptability between Chinese and Japanese college students.

PubMed

Wu, Yunqing; Zhai, Guofang; Li, Shasha; Ren, Chongqiang; Tsuchida, Shoji

2014-10-01

Along with the progressive acceleration of urbanization, the need to identify potentially troublesome "Not In My Back Yard" (NIMBY) facilities in the city is inevitable. To resolve NIMBY conflict, it is important to know people's NIMBY risk acceptability for these facilities. A questionnaire survey was used among Chinese and Japanese college students to identify NIMBY risk acceptability. LISREL was used to construct a structural equation model to analyze the difference in NIMBY risk acceptability between the Chinese and Japanese college students. Factors that may affect NIMBY risk acceptability were analyzed: "perceiving utility," "perceiving risk," "trust in government," "reasonable compensation," and "procedural justice." The findings show that Japanese students' concerns were greater than Chinese students' concerns. Perceiving utility and perceiving risk were the most important factors that affect people's NIMBY risk acceptability, followed by procedural justice, trust in government, and reasonable compensation. There is a difference between the different cultural backgrounds in confronting the risk: Chinese students focus more on the reputation and value of real estate, while Japanese students pay more attention to environmental pollution and damage to health. Furthermore, cultural influences play a role in students' risk perception. To improve the risk acceptability for NIMBY facilities and provide a basis for resolving NIMBY conflicts, it is necessary to ensure the benefits of the NIMBY facility while reducing environmental pollution. The findings of this study may be of interest for policy makers and practitioners to devise future NIMBY strategies.

Environmental Control and Life Support Systems Testing Facility at MSFC

NASA Technical Reports Server (NTRS)

2001-01-01

The Marshall Space Flight Center (MSFC) is responsible for designing and building the life support systems that will provide the crew of the International Space Station (ISS) a comfortable environment in which to live and work. Scientists and engineers at the MSFC are working together to provide the ISS with systems that are safe, efficient, and cost-effective. These compact and powerful systems are collectively called the Environmental Control and Life Support Systems, or simply, ECLSS. This photograph shows the Urine Processor Assembly (UPA) which utilizes the Vapor Compression Distillation (VCD) technology. The VCD is used for integrated testing of the entire Water Recovery System (WRS) and development testing of the Urine Processor Assembly. The UPA accepts and processes pretreated crewmember urine to allow it to be processed along with other wastewaters in the Water Processor Assembly (WPA). The WPA removes free gas, organic, and nonorganic constituents before the water goes through a series of multifiltration beds for further purification. Product water quality is monitored primarily through conductivity measurements. Unacceptable water is sent back through the WPA for reprocessing. Clean water is sent to a storage tank.

Etiology and pathogenesis of inflammatory bowel disease.

PubMed

Schmidt, C; Stallmach, A

2005-06-01

Despite of scientific efforts during the last decades, etiology and pathogenesis of the two major inflammatory bowel diseases, namely Crohn's disease and ulcerative colitis, remain rather unclear. According to the results of multiple studies it is accepted that the development of either disease is the result of an exaggerated or insufficiently suppressed immune response to a hitherto undefined luminal antigen, probably derived from the microbial flora. This inflammatory process leads to the well-known mucosal damage and therefore a further disturbance of the epithelial barrier function, resulting in an increased influx of bacteria into the intestinal wall, even further accelerating the inflammatory process. However, these immunological disturbances that have been investigated extensively during the past years have to be considered on the genetic background of the individual patient and the environmental factors the patient is exposed to. In this review we will attempt to summarize the current knowledge about risk factors for inflammatory bowel diseases, genetic and environmental factors of IBD and focus on the immunological alterations of innate and acquired immune system underlying Crohn's disease and ulcerative colitis.

Trends for Electron Beam Accelerator Applications in Industry

NASA Astrophysics Data System (ADS)

Machi, Sueo

2011-02-01

Electron beam (EB) accelerators are major pieces of industrial equipment used for many commercial radiation processing applications. The industrial use of EB accelerators has a history of more than 50 years and is still growing in terms of both its economic scale and new applications. Major applications involve the modification of polymeric materials to create value-added products, such as heat-resistant wires, heat-shrinkable sheets, automobile tires, foamed plastics, battery separators and hydrogel wound dressing. The surface curing of coatings and printing inks is a growing application for low energy electron accelerators, resulting in an environmentally friendly and an energy-saving process. Recently there has been the acceptance of the use of EB accelerators in lieu of the radioactive isotope cobalt-60 as a source for sterilizing disposable medical products. Environmental protection by the use of EB accelerators is a new and important field of application. A commercial plant for the cleaning flue gases from a coal-burning power plant is in operation in Poland, employing high power EB accelerators. In Korea, a commercial plant uses EB to clean waste water from a dye factory.

["Get it while you can!" attitude: late industrialization and implications for work, environment, and health in Ceará State, Brazil].

PubMed

Rigotto, Raquel Maria

2007-01-01

The present study focuses on the characteristics of late industrialization in a city in Ceará State (in the semiarid region of Northeast Brazil) and its implications for work, environment, and health in the context of industrial mobility and advanced capitalism. Using direct observation of work processes, interviews (with production managers, company presidents, workers, local authorities, and community leaders), institutional visits and secondary data analysis, eight recently built factories that manufacture chemicals, shoes, electric appliances, clothing, mechanical parts, and packaging were analyzed as to relocation, technology, organization, work relations, worker profile, environmental and occupational risks, and the impact of these factors on health and regulatory mechanisms. The lack of adequate criteria for attracting and accepting new investments, leading to a "get it while you can" attitude, the poor quality of jobs and environmental conditions, and the scale of new changes and risks in the area, like the difficulties of the public sector and society in dealing with these challenges, raise the issue of sustainability in the current development processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hourdequin, Marion, E-mail: Marion.Hourdequin@ColoradoCollege.edu; Department of Philosophy, Colorado College, 14 E. Cache La Poudre St., Colorado Springs, CO 80903; Landres, Peter

Traditional mechanisms for public participation in environmental impact assessment under U.S. federal law have been criticized as ineffective and unable to resolve conflict. As these mechanisms are modified and new approaches developed, we argue that participation should be designed and evaluated not only on practical grounds of cost-effectiveness and efficiency, but also on ethical grounds based on democratic ideals. In this paper, we review and synthesize modern democratic theory to develop and justify four ethical principles for public participation: equal opportunity to participate, equal access to information, genuine deliberation, and shared commitment. We then explore several tensions that are inherentmore » in applying these ethical principles to public participation in EIA. We next examine traditional NEPA processes and newer collaborative approaches in light of these principles. Finally, we explore the circumstances that argue for more in-depth participatory processes. While improved EIA participatory processes do not guarantee improved outcomes in environmental management, processes informed by these four ethical principles derived from democratic theory may lead to increased public engagement and satisfaction with government agency decisions. - Highlights: Black-Right-Pointing-Pointer Four ethical principles based on democratic theory for public participation in EIA. Black-Right-Pointing-Pointer NEPA and collaboration offer different strengths in meeting these principles. Black-Right-Pointing-Pointer We explore tensions inherent in applying these principles. Black-Right-Pointing-Pointer Improved participatory processes may improve public acceptance of agency decisions.« less

Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

NASA Astrophysics Data System (ADS)

Vaquero, C.; López de Ipiña, J.; Galarza, N.; Hargreaves, B.; Weager, B.; Breen, C.

2011-07-01

New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

Environmentally Compliant Coating Remover Evaluation

DTIC Science & Technology

2012-08-30

22 9 Total of 491 products evaluated 7 Background • Many DoD depainting operations currently use environmentally compliant peroxide -assisted... benzyl alcohol strippers • These strippers have acceptable coating removal rates with minimal physical damage to metallic substrates • However, several...Coatings • Environmentally compliant benzyl alcohol product • Passed corrosion testing conducted by SMI in 2011 11 Laboratory Testing Scope

Bioremediation of trace organic compounds found in precious metals refineries' wastewaters: a review of potential options.

PubMed

Barbosa, V L; Tandlich, R; Burgess, J E

2007-07-01

Platinum group metal (PGM) refining processes produce large quantities of wastewater, which is contaminated with the compounds that make up the solvents/extractants mixtures used in the process. These compounds often include solvesso, beta-hydroxyxime, amines, amides and methyl isobutyl ketone. A process to clean up PGM refinery wastewaters so that they could be re-used in the refining process would greatly contribute to continual water storage problems and to cost reduction for the industry. Based on the concept that organic compounds that are produced biologically can be destroyed biologically, the use of biological processes for the treatment of organic compounds in other types of waste stream has been favoured in recent years, owing to their low cost and environmental acceptability. This review examines the available biotechnologies and their effectiveness for treating compounds likely to be contained in precious metal extraction process wastewaters. The processes examined include: biofilters, fluidized bed reactors, trickle-bed bioreactors, bioscrubbers, two-phase partitioning bioreactors, membrane bioreactors and activated sludge. Although all processes examined showed adequate to excellent removal of organic compounds from various gaseous and fewer liquid waste streams, there was a variation in their effectiveness. Variations in performance of laboratory-scale biological processes are probably due to the inherent change in the microbial population composition due to selection pressure, environmental conditions and the time allowed for adaptation to the organic compounds. However, if these factors are disregarded, it can be established that activated sludge and membrane bioreactors are the most promising processes for use in the treatment of PGM refinery wastewaters.

39 CFR 775.11 - Environmental impact statements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... approaches or generally accepted research methods. For purposes of this subsection, “reasonably foreseeable...)), the environmental impacts and the alternatives are presented in comparative form, thus sharply... comparative merits. (iii) Identify the preferred alternative or alternatives in the draft and final statements...

39 CFR 775.11 - Environmental impact statements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... approaches or generally accepted research methods. For purposes of this subsection, “reasonably foreseeable...)), the environmental impacts and the alternatives are presented in comparative form, thus sharply... comparative merits. (iii) Identify the preferred alternative or alternatives in the draft and final statements...

39 CFR 775.11 - Environmental impact statements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... approaches or generally accepted research methods. For purposes of this subsection, “reasonably foreseeable...)), the environmental impacts and the alternatives are presented in comparative form, thus sharply... comparative merits. (iii) Identify the preferred alternative or alternatives in the draft and final statements...

39 CFR 775.11 - Environmental impact statements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... approaches or generally accepted research methods. For purposes of this subsection, “reasonably foreseeable...)), the environmental impacts and the alternatives are presented in comparative form, thus sharply... comparative merits. (iii) Identify the preferred alternative or alternatives in the draft and final statements...

39 CFR 775.11 - Environmental impact statements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... approaches or generally accepted research methods. For purposes of this subsection, “reasonably foreseeable...)), the environmental impacts and the alternatives are presented in comparative form, thus sharply... comparative merits. (iii) Identify the preferred alternative or alternatives in the draft and final statements...

75 FR 8339 - Difenzoquat; Product Cancellation Order for Certain Pesticide Registrations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... stakeholders including environmental, human health, and agricultural advocates; the chemical industry... Cancellation Order for Certain Pesticide Registrations AGENCY: Environmental Protection Agency (EPA). ACTION... registrant and accepted by the Agency, of products containing the pesticide difenzoquat, pursuant to section...

Public Acceptability in the UK and USA of Nudging to Reduce Obesity: The Example of Reducing Sugar-Sweetened Beverages Consumption

PubMed Central

Petrescu, Dragos C.; Hollands, Gareth J.; Couturier, Dominique-Laurent; Ng, Yin-Lam; Marteau, Theresa M.

2016-01-01

Background “Nudging”—modifying environments to change people’s behavior, often without their conscious awareness—can improve health, but public acceptability of nudging is largely unknown. Methods We compared acceptability, in the United Kingdom (UK) and the United States of America (USA), of government interventions to reduce consumption of sugar-sweetened beverages. Three nudge interventions were assessed: i. reducing portion Size, ii. changing the Shape of the drink containers, iii. changing their shelf Location; alongside two traditional interventions: iv. Taxation and v. Education. We also tested the hypothesis that describing interventions as working through non-conscious processes decreases their acceptability. Predictors of acceptability, including perceived intervention effectiveness, were also assessed. Participants (n = 1093 UK and n = 1082 USA) received a description of each of the five interventions which varied, by randomisation, in how the interventions were said to affect behaviour: (a) via conscious processes; (b) via non-conscious processes; or (c) no process stated. Acceptability was derived from responses to three items. Results Levels of acceptability for four of the five interventions did not differ significantly between the UK and US samples; reducing portion size was less accepted by the US sample. Within each country, Education was rated as most acceptable and Taxation the least, with the three nudge-type interventions rated between these. There was no evidence to support the study hypothesis: i.e. stating that interventions worked via non-conscious processes did not decrease their acceptability in either the UK or US samples. Perceived effectiveness was the strongest predictor of acceptability for all interventions across the two samples. Conclusion In conclusion, nudge interventions to reduce consumption of sugar-sweetened beverages seem similarly acceptable in the UK and USA, being more acceptable than taxation, but less acceptable than education. Contrary to prediction, we found no evidence that highlighting the non-conscious processes by which nudge interventions may work decreases their acceptability. However, highlighting the effectiveness of all interventions has the potential to increase their acceptability. PMID:27276222

Acceptance of genetically modified foods: the relation between technology and evaluation.

PubMed

Tenbült, Petra; De Vries, Nanne K; van Breukelen, Gerard; Dreezens, Ellen; Martijn, Carolien

2008-07-01

This study investigates why consumers accept different genetically modified food products to different extents. The study shows that whether food products are genetically modified or not and whether they are processed or not are the two important features that affect the acceptance of food products and their evaluation (in terms of perceived healthiness, naturalness, necessity and tastiness). The extent to which these evaluation attributes and acceptance of a product are affected by genetic modification or processing depends on whether the product is negatively affected by the other technology: Any technological change to a 'natural' product (when nonprocessed products are genetically modified or when non-genetically modified products are processed) affect evaluation and acceptance stronger than a change to an technologically adapted product (when processed products are also genetically modified or vice versa). Furthermore, evaluation attributes appear to mediate the effects of genetic modification and processing on acceptance.

5 CFR 850.301 - Electronic records; other acceptable records.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; other acceptable records. (a) Acceptable electronic records for processing by the electronic retirement and insurance processing system include— (1) Electronic employee data submitted by an agency or other entity through EHRI and stored within the new retirement and insurance processing system; (2) Electronic...

5 CFR 850.301 - Electronic records; other acceptable records.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; other acceptable records. (a) Acceptable electronic records for processing by the electronic retirement and insurance processing system include— (1) Electronic employee data submitted by an agency or other entity through EHRI and stored within the new retirement and insurance processing system; (2) Electronic...

5 CFR 850.301 - Electronic records; other acceptable records.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; other acceptable records. (a) Acceptable electronic records for processing by the electronic retirement and insurance processing system include— (1) Electronic employee data submitted by an agency or other entity through EHRI and stored within the new retirement and insurance processing system; (2) Electronic...

5 CFR 850.301 - Electronic records; other acceptable records.

Code of Federal Regulations, 2010 CFR

2010-01-01

...; other acceptable records. (a) Acceptable electronic records for processing by the electronic retirement and insurance processing system include— (1) Electronic employee data submitted by an agency or other entity through EHRI and stored within the new retirement and insurance processing system; (2) Electronic...

Environmental Remediation Activities in Japan Following the Fukushima Dai-ichi Reactor Incident - 12603

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lively, J.W.; Kelley, J.L.; Marcial, M.R.

2012-07-01

In March 2011, the Fukushima Dai-ichi reactor power plant was crippled by the Great Pacific earthquake and subsequent tsunami. Much of the focus in the news was on the reactor site itself as the utility company (TEPCO), the Japanese government, and experts from around the world worked to bring the damaged plants into a safe shutdown condition and stem the release of radioactivity to the environment. Most of the radioactivity released was carried out to sea with the prevailing winds. Still, as weather patterns changed and winds shifted, a significant plume of radioactive materials released from the plant deposited inmore » the environment surrounding the plant, contaminating large land areas of the Fukushima Prefecture. The magnitude of the radiological impact to the surrounding environmental is so large that the Japanese government has had to reevaluate the meaning of 'acceptably clean'. In many respects, 'acceptably clean' cannot be a one-size-fits-all standard. The economics costs of such an approach would make impossible what is already an enormous and costly environmental response and remediation task. Thus, the Japanese government has embarked upon an approach that is both situation-specific and reasonably achievable. For example, the determination of acceptably clean for a nursery school or kindergarten play yard may be different from that for a parking lot. The acceptably clean level of residual radioactivity in the surface soil of a rice paddy is different from that in a forested area. The recognized exposure situation (scenario) thus plays a large role in the decision process. While sometimes complicated to grasp or implement, such an approach does prioritize national resources to address environment remediation based upon immediate and significant risks. In addition, the Japanese government is testing means and methods, including advanced or promising technologies, that could be proven to be effective in reducing the amount of radioactivity in the environment beyond a fixed, concentration based limit. Essentially, the definition of acceptably clean includes the concept of reasonably achievable, given the available technology, means and methods, and the cost to implement such. The Japanese government recently issued three technology demonstration contracts expressly designed to test and evaluate the available technologies, means, and methods, which, if implemented, might produce the greatest risk reduction from environmental contamination for the best value. One of the Japanese contract holders, Obayashi JV, has teamed with AMEC to demonstrate the applicability and capabilities of the Orion ScanPlot{sup SM} and ScanSort{sup SM} technologies in radiologically impacted towns both inside and immediately outside the 20 km restricted zone. This presentation provides some unique images and informative insight into the environmental radioactive impacts in and around the exclusion zone. It will provide a look at one element of the Japanese government?s efforts to achieve the greatest risk reduction that is reasonably achievable. The Orion ScanPlot{sup SM} and ScanSort{sup SM} are being used with success on the Japan Town Demonstration Project to assess pre-remedial action contamination levels, document the post-remedial action contamination levels and to precisely measure and segregate excavated soils based on their radioactive content and the prescribed segregation limits (DCS). Initial results suggest that these technologies could provide capabilities to the remedial action efforts that would result in considerable improvements in field data certainty and compliance with remedial objectives while reducing overall costs. (authors)« less

State of the art in benefit-risk analysis: consumer perception.

PubMed

Ueland, Ø; Gunnlaugsdottir, H; Holm, F; Kalogeras, N; Leino, O; Luteijn, J M; Magnússon, S H; Odekerken, G; Pohjola, M V; Tijhuis, M J; Tuomisto, J T; White, B C; Verhagen, H

2012-01-01

Benefit and risk perception with respect to food consumption, have been a part of human daily life from beginning of time. In today's society the food chain is long with many different types of actors and low degree of transparency. Making informed food choices where knowledge of benefits and risks is part of the decision making process are therefore complicated for consumers. Thus, to understand how consumers perceive benefits and risks of foods, their importance in relation to quality evaluations are aspects that need to be addressed. The objective of this paper is to discuss state of the art in understanding consumer perceptions of benefits and risks of foods in order to improve understanding of consumer behaviour in the food domain. Risks may be associated with both acute and long term consequences, some of which may have serious effects. Perceived risks are connected to morbidity and mortality along two dimensions relating to unknown risk, and to which extent the risk is dreaded by the consumer. Unfamiliar, uncertain, unknown, uncontrollable, and severe consequences are some factors associated with risk perception. Novel food processing techniques, for instance, score high on several of these parameters and are consequently regarded with suspicion and perceived as risky by consumers. On a daily basis, benefits of foods and food consumption are more important in most consumers' minds than risks. Benefits are often associated with food's ability to assuage hunger, and to provide pleasure through eating and socialising. In addition, two main categories of benefits that are important for acceptance of product innovations are health and environmental benefits. Benefit and risk perception of foods seem to be inversely correlated, so when something is perceived as being highly beneficial, it is correspondingly perceived as having low risk. However, slightly different paths are used in the formation of these perceptions; benefit perception is based on heuristics and experience, while risk perception is to a larger extent the result of cognitive information processing. Consumers are particularly conservative when it comes to perception and acceptance of foods compared to other products. Benefit-risk evaluations tend to be skewed towards acceptance of all that is traditional and well-known (benefits), and rejection or suspicion towards anything that is novel or highly processed (risks) regardless of actual risk. Knowledge of how consumers perceive benefits and risks of foods, may contribute to understanding benefit-risk perception in other areas related to personal, societal or environmental perspectives. Copyright © 2011 Elsevier Ltd. All rights reserved.

25 CFR 16.5 - Acceptance and acknowledgement of service of process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Acceptance and acknowledgement of service of process. 16... INDIANS OF THE FIVE CIVILIZED TRIBES § 16.5 Acceptance and acknowledgement of service of process. Service by the Field Solicitor or any other person of any process or notice, pursuant to any Federal statute...

Advanced power assessment for Czech lignite, Task 3.6, Part 2. The 2nd international conference on energy and environment: Transitions in East Central Europe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sondreal, E.A.; Mann, M.D.; Weber, G.W.

1995-12-01

On November 1-5, 1994, the Energy & Environmental Research Center (EERC) and Power Research Institute of Prague cosponsored their second conference since 1991 in the Czech Republic, entitled ``Energy and Environment: Transitions in East Central Europe.`` This conference was a continuation of the EERC`s joint commitment, initiated in 1190, to facilitate solutions to short- and long-term energy and environmental problems in East Central Europe. Production of energy from coal in an environmentally acceptable manner is a critical issue facing East Central Europe, because the region continues to rely on coal as its primary energy source. The goal of the conferencemore » was to develop partnerships between industry, government, and the research community in East Central Europe and the United States to solve energy and environmental issues in a manner that fosters economic development. Among the topics addressed at the conference were: conventional and advanced energy generation systems; economic operation of energy systems; air pollution controls; power system retrofitting and repowering, financing options; regulatory issues; energy resource options; waste utilization and disposal; and long-range environmental issues. Selected papers in the proceedings have been processed separately for inclusion in the Energy Science and Technology database.« less

Final Environmental Impact Statement for the construction and operation of Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3070)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeitoun, A.

1994-08-01

This two-volume Final Environmental Impact Statement (FEIS) was prepared by the Nuclear Regulatory Commission (NRC) in accordance with regulation 10 CFR Part 51, which implements the National Environmental Policy Act (NEPA). Volume 1 contains the assessment of the potential environmental impacts for licensing the construction and operation of a proposed gaseous centrifuge enrichment facility to be built in Claiborne Parish, Louisiana, by Louisiana Energy Services, LP. (LES). The proposed facility would have a production capacity of about 866 metric tons annually of up to 5 weight percent enriched UF{sub 6}, using a proven centrifuge technology. Included in the assessment aremore » construction, both normal operations and potential accidents (internal and external events), and the eventual decontamination and decommissioning (D&D)- of the site. Issues addressed include the purpose and need for the facility, the alternatives to the proposed action, potential disposition of the tails, the site selection process, and environmental justice. The NRC staff concludes that the facility can be constructed and operated with small and acceptable impacts on the public and the environment. The FEIS supports issuance of a license to the applicant, Louisiana Energy Services, to authorize construction and operation of the proposed facility.« less

Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

PubMed

Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

2016-04-01

This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

The human factors of color in environmental design: A critical review

NASA Technical Reports Server (NTRS)

Wise, Barbara K.; Wise, James A.

1988-01-01

The literature on environmental color to enhance habitability in the design of Space Station interiors is reviewed. Some 200 studies were examined to determine the relative contributions of the three dimensions of color (hue, saturation, and brightness or lightness) to responses to environmental colorations. Implications of the study for color usage in novel settings and locales include: (1) There are no hard-wired linkages between environmental colors and particular judgmental or emotional states; (2) Perceptual impressions of color applications can, however, affect experiences and performances in settings; (3) Color behavior studies cannot yet specify an optimal color scheme, but instead must consider differing objectives, the relative importance of each, and design features such as the coordination of geometry, color, texture, etc.; (4) Some color-behavior effects are governed by low-level retinal and limbal mechanisms as well as by cognitive processes; and (5) Colors should first be specified in terms of what they are to do instead of what they are. Some exercise of choice is therefore needed to establish a sense of personal competence in the setting, since color must be ultimately be accepted by the people who are to live with it.

A Benchmarking Initiative for Reactive Transport Modeling Applied to Subsurface Environmental Applications

NASA Astrophysics Data System (ADS)

Steefel, C. I.

2015-12-01

Over the last 20 years, we have seen the evolution of multicomponent reactive transport modeling and the expanding range and increasing complexity of subsurface environmental applications it is being used to address. Reactive transport modeling is being asked to provide accurate assessments of engineering performance and risk for important issues with far-reaching consequences. As a result, the complexity and detail of subsurface processes, properties, and conditions that can be simulated have significantly expanded. Closed form solutions are necessary and useful, but limited to situations that are far simpler than typical applications that combine many physical and chemical processes, in many cases in coupled form. In the absence of closed form and yet realistic solutions for complex applications, numerical benchmark problems with an accepted set of results will be indispensable to qualifying codes for various environmental applications. The intent of this benchmarking exercise, now underway for more than five years, is to develop and publish a set of well-described benchmark problems that can be used to demonstrate simulator conformance with norms established by the subsurface science and engineering community. The objective is not to verify this or that specific code--the reactive transport codes play a supporting role in this regard—but rather to use the codes to verify that a common solution of the problem can be achieved. Thus, the objective of each of the manuscripts is to present an environmentally-relevant benchmark problem that tests the conceptual model capabilities, numerical implementation, process coupling, and accuracy. The benchmark problems developed to date include 1) microbially-mediated reactions, 2) isotopes, 3) multi-component diffusion, 4) uranium fate and transport, 5) metal mobility in mining affected systems, and 6) waste repositories and related aspects.

5 CFR 838.302 - Language not acceptable for processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Language not acceptable for processing... Affecting Employee Annuities § 838.302 Language not acceptable for processing. (a) Qualifying Domestic... accordance with the terminology used in this part. (3) Although any language satisfying the requirements of...

5 CFR 838.302 - Language not acceptable for processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Language not acceptable for processing... Affecting Employee Annuities § 838.302 Language not acceptable for processing. (a) Qualifying Domestic... accordance with the terminology used in this part. (3) Although any language satisfying the requirements of...

77 FR 67352 - City of New York; Notice of Application Ready for Environmental Analysis and Soliciting Comments...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... accepted and is now ready for environmental analysis. l. Project facilities would include: (1) An existing... 42,281 megawatt-hours of electricity annually. m. A copy of the application is available for review...

40 CFR 1518.3 - Policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY OFFICE OF ENVIRONMENTAL QUALITY MANAGEMENT FUND § 1518.3 Policy. (a) All studies and projects financed through the OEQ Management Fund shall be... Quality Improvement Act. (b) Agency funds accepted by the Director for transfer into the OEQ Management...

TESTING INDOOR AIR PRODUCTS: ONE APPROACH TO DEVELOPING WIDELY ACCEPTED PROTOCOLS

EPA Science Inventory

The paper describes an approach to developing widely acce ted products for testing indoor air products. [NOTE: Research Triangle Institute (RTI) is a partner in the U.S. Environmental Protection Agency's (EPA's) Environmental Technology Verification (ETV) Program with responsibil...

48 CFR 1552.215-71 - Evaluation factors for award.

Code of Federal Regulations, 2014 CFR

2014-10-01

... award. 1552.215-71 Section 1552.215-71 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION... acceptable, equal price (cost) offers, the Government will consider socioeconomic, environmental and other similar factors, as listed below in descending order of importance: (b) Factors and significant subfactors...

48 CFR 1552.215-71 - Evaluation factors for award.

Code of Federal Regulations, 2012 CFR

2012-10-01

... award. 1552.215-71 Section 1552.215-71 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION... acceptable, equal price (cost) offers, the Government will consider socioeconomic, environmental and other similar factors, as listed below in descending order of importance: (b) Factors and significant subfactors...

48 CFR 1552.215-71 - Evaluation factors for award.

Code of Federal Regulations, 2011 CFR

2011-10-01

... award. 1552.215-71 Section 1552.215-71 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION... acceptable, equal price (cost) offers, the Government will consider socioeconomic, environmental and other similar factors, as listed below in descending order of importance: (b) Factors and significant subfactors...

48 CFR 1552.215-71 - Evaluation factors for award.

Code of Federal Regulations, 2013 CFR

2013-10-01

... award. 1552.215-71 Section 1552.215-71 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION... acceptable, equal price (cost) offers, the Government will consider socioeconomic, environmental and other similar factors, as listed below in descending order of importance: (b) Factors and significant subfactors...

49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

Code of Federal Regulations, 2010 CFR

2010-10-01

... principles issued by the Financial Accounting Standards Board (FASB). 1200.2 Section 1200.2 Transportation... COMMERCE ACT § 1200.2 Adoption of generally accepted accounting principles issued by the Financial... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental...

Payload test philosophy. [JPL views on qualification/acceptance testing

NASA Technical Reports Server (NTRS)

Gindorf, T.

1979-01-01

The general philosophy of how JPL views payload qualification/acceptance testing for programs that are done either in-house or by contractors is described. Particular attention is given to mission risk classifications, preliminary critical design reviews, environmental design requirements, the thermal and dynamics development tests, and the flight spacecraft system test.

Student Acceptance of the TICCIT System: A Preliminary Study.

ERIC Educational Resources Information Center

Asay, Calvin S.; Schneider, Edward W.

Twenty male and female students from a high school psychology class participated in a formative evaluation of student acceptance and performance with the Primary Instruction Logic of the TICCIT delivery system. A secondary goal was a pilot effort to design a carrel that would optimize certain parameters of the physical/environmental conditions…

24 CFR 51.105 - Exceptions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Exceptions. 51.105 Section 51.105... ENVIRONMENTAL CRITERIA AND STANDARDS Noise Abatement and Control § 51.105 Exceptions. (a) Flexibility for non... acceptability standard of 65 decibels, the Acceptable Zone may be shifted to Ldn 70 on a case-by-case basis if...

24 CFR 51.105 - Exceptions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Exceptions. 51.105 Section 51.105... ENVIRONMENTAL CRITERIA AND STANDARDS Noise Abatement and Control § 51.105 Exceptions. (a) Flexibility for non... acceptability standard of 65 decibels, the Acceptable Zone may be shifted to Ldn 70 on a case-by-case basis if...

24 CFR 51.105 - Exceptions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Exceptions. 51.105 Section 51.105... ENVIRONMENTAL CRITERIA AND STANDARDS Noise Abatement and Control § 51.105 Exceptions. (a) Flexibility for non... acceptability standard of 65 decibels, the Acceptable Zone may be shifted to Ldn 70 on a case-by-case basis if...

24 CFR 51.105 - Exceptions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Exceptions. 51.105 Section 51.105... ENVIRONMENTAL CRITERIA AND STANDARDS Noise Abatement and Control § 51.105 Exceptions. (a) Flexibility for non... acceptability standard of 65 decibels, the Acceptable Zone may be shifted to Ldn 70 on a case-by-case basis if...

24 CFR 51.105 - Exceptions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Exceptions. 51.105 Section 51.105... ENVIRONMENTAL CRITERIA AND STANDARDS Noise Abatement and Control § 51.105 Exceptions. (a) Flexibility for non... acceptability standard of 65 decibels, the Acceptable Zone may be shifted to Ldn 70 on a case-by-case basis if...

76 FR 12719 - City of Escondido, California, and Vista Irrigation District; Notice of Application Accepted for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-08

..., California, and Vista Irrigation District; Notice of Application Accepted for Filing, Ready for Environmental... Filed: December 3, 2010. d. Applicant: City of Escondido, California, (Escondido) and Vista Irrigation District (Vista). e. Name of Project: Bear Valley Powerhouse Project. f. Location: On the San Luis Rey...

76 FR 12720 - City of Escondido, CA, and Vista Irrigation District; Notice of Application Accepted for Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-08

..., CA, and Vista Irrigation District; Notice of Application Accepted for Filing, Ready for Environmental...: City of Escondido, California (Escondido) and Vista Irrigation District (Vista). e. Name of Project... owned by the La Jolla, San Pasqual, and Rincon Indian Tribes. g. Filed Pursuant to: Federal Power Act...

49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

Code of Federal Regulations, 2011 CFR

2011-10-01

... principles issued by the Financial Accounting Standards Board (FASB). 1200.2 Section 1200.2 Transportation... COMMERCE ACT § 1200.2 Adoption of generally accepted accounting principles issued by the Financial... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental...

78 FR 59919 - Pershing County Water Conservation District; Notice of Application Accepted for Filing With the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 14327-000] Pershing County Water Conservation District; Notice of Application Accepted for Filing With the Commission, Intent to Waive Scoping, Soliciting Motions to Intervene and Protests, Ready For Environmental Analysis, and Soliciting Comments, Terms and Conditions,...

Physio-Environmental Sensing and Live Modeling

PubMed Central

Diaz, Vanessa; Gaggioli, Andrea; Liò, Pietro; Mazzà, Claudia; Merelli, Emanuela; Meskers, Carel G.M; Pappalardo, Francesco; von Ammon, Rainer

2013-01-01

In daily life, humans are constantly interacting with their environment. Evidence is emerging that this interaction is a very important modulator of health and well-being, even more so in our rapidly ageing society. Information and communication technology lies at the heart of the human health care revolution. It cannot remain acceptable to use out of date data analysis and predictive algorithms when superior alternatives exist. Communication network speed, high penetration of home broadband, availability of various mobile network options, together with the available detailed biological data for individuals, are producing promising advances in computerized systems that will turn information on human-environment interactions into actual knowledge with the potential to help make medical and lifestyle decisions. We introduced and discussed a key scenario in which hardware and software technologies capable of simultaneously sensing physiological and environmental signals process health care data in real-time to issue alarms, warnings, or simple recommendations to the patient or carers. PMID:23612245

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bishop, J.

Every environmentalist and environmental manager dreams of a day when it will be possible to load hazardous waste into one end of a magic machine and retrieve beneficial -- or at least benign -- products from the other end. Two unrelated companies -- Molten Metal Technology Inc., (Waltham, Mass.) and ELI Eco Logic Inc. (Rockwood, Ontario, Canada) -- have developed different technologies that show promise of realizing such dreams. Whether either company`s solution to the problem of effectively managing hazardous wastes proves to be the dream machine remains to be seen, but their stories offer insight into what the futuremore » may hold for hazardous waste management. The Eco Logic Process was demonstrated in 1991 at Hamilton Harbour, Ontario, and later at Bay City, Mich., in cleanups of polychlorinated biphenyls (PCBs) and other soil contaminants. The technology was accepted into the US Environmental Protection Agency`s Superfund Innovative Technology Evaluation (SITE) program in 1992.« less

Alternative to Nitric Acid Passivation Project Overview

NASA Technical Reports Server (NTRS)

Lewis, Pattie L.

2013-01-01

The standard practice for protection of stainless steel is a process called passivation. This procedure results in the formation of a metal oxide layer to prevent corrosion. Typical passivation procedures call for the use of nitric acid which exhibits excellent corrosion performance; however, there are a number of environmental, worker safety, and operational issues associated with its use. The longtime military specification for the passivation of stainless steel was cancelled in favor of newer specifications which allow for the use of citric acid in place of nitric acid. Citric acid offers a variety of benefits that include increased safety for personnel, reduced environmental impact, and reduced operational costs. There have been few studies, however, to determine whether citric acid is an acceptable alternative for NASA and DoD. This paper details activities to date including development of the joint test plan, on-going and planned testing, and preliminary results.

Design and implementation of a vegetarian food system for a closed chamber test.

PubMed

Kloeris, V; Vodovotz, Y; Bye, L; Stiller, C Q; Lane, E

1998-01-01

The National Aeronautics and Space Administration (NASA) is conducting a series of closed chamber environmental tests, called the Lunar Mars Life Support Test Project (LMLSTP), which is designed to provide data for the development of surface habitats for the Moon and Mars. These surface habitats will be closed loop environmental systems that will recycle air and water and will grow crops to provide food for crew members. In conjunction with these tests, the Food Systems Engineering Facility at the Johnson Space Center (JSC) tested a 10-day vegetarian menu based on items that can be made from the projected crop list for these habitats. The planned menu met most of the nutritional requirements of the four crew members and was found highly acceptable. Automation of the food preparation and processing equipment was strongly recommended because the preparation time was judged excessive. The waste generated was largely due to leftovers.

5 CFR 838.803 - Language not acceptable for processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Language not acceptable for processing... Awarding Former Spouse Survivor Annuities § 838.803 Language not acceptable for processing. (a) Qualifying... drafted in accordance with the terminology used in this part. (3) Although any language satisfying the...

5 CFR 838.803 - Language not acceptable for processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Language not acceptable for processing... Awarding Former Spouse Survivor Annuities § 838.803 Language not acceptable for processing. (a) Qualifying... drafted in accordance with the terminology used in this part. (3) Although any language satisfying the...

The role of public communication in decision making for waste management infrastructure.

PubMed

Kirkman, Richard; Voulvoulis, Nikolaos

2017-12-01

Modern waste management provision seeks to meet challenging objectives and strategies while reflecting community aspirations and ensuring cost-effective compliance with statutory obligations. Its social acceptability, which affects both what systems (infrastructure) can be put in place and to what extent their implementation will be successful, is a multi-dimensional phenomenon, often not well understood. In light of the growing evidence that decisions to build new infrastructure are often contested by the public, there is a clear need to understand the role of scientific evidence in public perception, particularly as environmental infrastructure delivery is often objected to by the public on environmental grounds. In this paper the need for waste management infrastructure is reviewed, and the way its delivery in the UK has evolved is used as an example of the role of public perception in the planning and delivery of waste facilities. Findings demonstrate the vital role of public communication in waste management infrastructure delivery. Public perception must be taken into account early in the decision making process, with the public informed and engaged from the start. There is a pressing need for people not simply to accept but to understand and appreciate the need for infrastructure, the nature of infrastructure investments and development, the costs and the benefits involved, and the technological aspects. Scientific evidence and literacy have a critical role to play, facilitating public engagement in a process that empowers people, allowing them to define and handle challenges and influence decisions that will impact their lives. Problem ownership, and an increased probability of any solutions proposed being selected and implemented successfully are potential benefits of such approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Slippery Slope: Children's Perceptions of Their Role in Environmental Preservation in the Peruvian Amazon

ERIC Educational Resources Information Center

Galeano, Rebecca

2013-01-01

Despite international attention and attempts to preserve the environmental diversity of the Amazon, it is an accepted fact that those who inhabit the forest must be the ones who preserve it. This article presents an analysis of how children in small rural riverine communities along the Amazon understand the importance of environmental preservation…

Environmental Problems: A Global Security Threat. Report of the United Nations of the Next Decade Conference (24th, Hamilton Parish, Bermuda, June 18-23, 1989).

ERIC Educational Resources Information Center

Stanley Foundation, Muscatine, IA.

The world's political structure and many economic practices are out of harmony with nature. This disharmony threatens environmentally sustainable growth and human survival. United Nations (UN) conference participants discussed the degree of political acceptance of concepts such as environmental security and sustainable development. Their reading…

Preformed amide-containing biopolymer for improving the environmental performance of synthesized urea–formaldehyde in agro-fiber composites

Treesearch

Altaf H. Basta; Houssni El-Saied; Jerrold E. Winandy; Ronald Sabo

2011-01-01

Investigations have continued for production high performance agro-based composites using environmentally acceptable approaches. This study examines the role of adding amide-containing biopolymers during synthesis of urea–formaldehyde (UF) on properties of adhesive produced, especially its adhesion potential. The environmental performance of UF-resin synthesized in the...

Improving diet sustainability through evolution of food choices: review of epidemiological studies on the environmental impact of diets

PubMed Central

Perignon, Marlène; Vieux, Florent; Soler, Louis-Georges; Masset, Gabriel

2017-01-01

The Food and Agriculture Organization defines sustainable diets as nutritionally adequate, safe, healthy, culturally acceptable, economically affordable diets that have little environmental impact. This review summarizes the studies assessing, at the individual level, both the environmental impact and the nutritional quality or healthiness of self-selected diets. Reductions in meat consumption and energy intake were identified as primary factors for reducing diet-related greenhouse gas emissions. The choice of foods to replace meat, however, was crucial, with some isocaloric substitutions possibly increasing total diet greenhouse gas emissions. Moreover, nutritional adequacy was rarely or only partially assessed, thereby compromising the assessment of diet sustainability. Furthermore, high nutritional quality was not necessarily associated with affordability or lower environmental impact. Hence, when identifying sustainable diets, each dimension needs to be assessed by relevant indicators. Finally, some nonvegetarian self-selected diets consumed by a substantial fraction of the population showed good compatibility with the nutritional, environmental, affordability, and acceptability dimensions. Altogether, the reviewed studies revealed the scarcity of standardized nationally representative data for food prices and environmental indicators and suggest that diet sustainability might be increased without drastic dietary changes. PMID:27974596

Implementing Participatory Decision Making in Forest Planning

NASA Astrophysics Data System (ADS)

Ananda, Jayanath

2007-04-01

Forest policy decisions are often a source of debate, conflict, and tension in many countries. The debate over forest land-use decisions often hinges on disagreements about societal values related to forest resource use. Disagreements on social value positions are fought out repeatedly at local, regional, national, and international levels at an enormous social cost. Forest policy problems have some inherent characteristics that make them more difficult to deal with. On the one hand, forest policy decisions involve uncertainty, long time scales, and complex natural systems and processes. On the other hand, such decisions encompass social, political, and cultural systems that are evolving in response to forces such as globalization. Until recently, forest policy was heavily influenced by the scientific community and various economic models of optimal resource use. However, growing environmental awareness and acceptance of participatory democracy models in policy formulation have forced the public authorities to introduce new participatory mechanisms to manage forest resources. Most often, the efforts to include the public in policy formulation can be described using the lower rungs of Arnstein’s public participation typology. This paper presents an approach that incorporates stakeholder preferences into forest land-use policy using the Analytic Hierarchy Process (AHP). An illustrative case of regional forest-policy formulation in Australia is used to demonstrate the approach. It is contended that applying the AHP in the policy process could considerably enhance the transparency of participatory process and public acceptance of policy decisions.

Earth benefits of interdisciplinary CELSS-related research by the NSCORT in Bioregenerative Life Support

NASA Technical Reports Server (NTRS)

Mitchell, C.; Sherman, L.; Nielsen, S.; Nelson, P.; Trumbo, P.; Hodges, T.; Hasegawa, P.; Bressan, R.; Ladisch, M.; Auslander, D.

1996-01-01

Earth benefits of research from the NSCORT in Bioregenerative Life Support will include the following: development of active control mechanisms for light, CO2, and temperature to maximize photosynthesis of crop plants during important phases of crop development; automation of crop culture systems; creation of novel culture systems for optimum productivity; creation of value-added crops with superior nutritional, yield, and waste-process characteristics; environmental control of food and toxicant composition of crops; new process technologies and novel food products for safe, nutritious, palatable vegetarian diets; creation of menus for healthful vegetarian diets with psychological acceptability; enzymatic procedures to degrade recalcitrant crop residues occurring in municipal waste; control-system strategies to ensure sustainabilty of a CELSS that will enable management of diverse complex systems on Earth.

Earth benefits of interdisciplinary celss-related research by the NSCORT in Bioregenerative Life Support

NASA Astrophysics Data System (ADS)

Mitchell, C.; Sherman, L.; Nielsen, S.; Nelson, P.; Trumbo, P.; Hodges, T.; Hasegawa, P.; Bressan, R.; Ladisch, M.; Auslander, D.

Earth benefits of research from the NSCORT in Bioregenerative Life Support will include the following: development of active control mechanisms for light, CO_2, and temperature to maximize photosynthesis of crop plants during important phases of crop development; automation of crop culture systems; creation of novel culture systems for optimum productivity; creation of value-added crops with superior nutritional, yield, and waste-process characteristics; environmental control of food and toxicant composition of crops; new process technologies and novel food products for safe, nutritious, palatable vegetarian diets; creation of menus for healthful vegetarian diets with psychological acceptability; enzymatic procedures to degrade recalcitrant crop residues occurring in municipal waste; control-system strategies to ensure sustainability of a CELSS that will enable management of diverse complex systems on Earth.

Biodiesel production with special emphasis on lipase-catalyzed transesterification.

PubMed

Bisen, Prakash S; Sanodiya, Bhagwan S; Thakur, Gulab S; Baghel, Rakesh K; Prasad, G B K S

2010-08-01

The production of biodiesel by transesterification employing acid or base catalyst has been industrially accepted for its high conversion and reaction rates. Downstream processing costs and environmental problems associated with biodiesel production and byproducts recovery have led to the search for alternative production methods. Recently, enzymatic transesterification involving lipases has attracted attention for biodiesel production as it produces high purity product and enables easy separation from the byproduct, glycerol. The use of immobilized lipases and immobilized whole cells may lower the overall cost, while presenting less downstream processing problems, to biodiesel production. The present review gives an overview on biodiesel production technology and analyzes the factors/methods of enzymatic approach reported in the literature and also suggests suitable method on the basis of evidence for industrial production of biodiesel.

Biomedical data integration - capturing similarities while preserving disparities.

PubMed

Bianchi, Stefano; Burla, Anna; Conti, Costanza; Farkash, Ariel; Kent, Carmel; Maman, Yonatan; Shabo, Amnon

2009-01-01

One of the challenges of healthcare data processing, analysis and warehousing is the integration of data gathered from disparate and diverse data sources. Promoting the adoption of worldwide accepted information standards along with common terminologies and the use of technologies derived from semantic web representation, is a suitable path to achieve that. To that end, the HL7 V3 Reference Information Model (RIM) [1] has been used as the underlying information model coupled with the Web Ontology Language (OWL) [2] as the semantic data integration technology. In this paper we depict a biomedical data integration process and demonstrate how it was used for integrating various data sources, containing clinical, environmental and genomic data, within Hypergenes, a European Commission funded project exploring the Essential Hypertension [3] disease model.

Earth benefits of interdisciplinary CELSS-related research by the NSCORT in Bioregenerative Life Support.

PubMed

Mitchell, C; Sherman, L; Nielsen, S; Nelson, P; Trumbo, P; Hodges, T; Hasegawa, P; Bressan, R; Ladisch, M; Auslander, D

1996-01-01

Earth benefits of research from the NSCORT in Bioregenerative Life Support will include the following: development of active control mechanisms for light, CO2, and temperature to maximize photosynthesis of crop plants during important phases of crop development; automation of crop culture systems; creation of novel culture systems for optimum productivity; creation of value-added crops with superior nutritional, yield, and waste-process characteristics; environmental control of food and toxicant composition of crops; new process technologies and novel food products for safe, nutritious, palatable vegetarian diets; creation of menus for healthful vegetarian diets with psychological acceptability; enzymatic procedures to degrade recalcitrant crop residues occurring in municipal waste; control-system strategies to ensure sustainabilty of a CELSS that will enable management of diverse complex systems on Earth.

Effects of solar cell environment on contact integrity

NASA Technical Reports Server (NTRS)

Weizer, Victor G.; Fatemi, Navid S.

1993-01-01

The III-V semiconductors react extremely rapidly with most commonly used contact metallizations. This precludes the use of elevated temperatures in the contact formation process for solar cells and other shallow junction devices. These devices must rely upon contact metallizations that are sufficiently conductive in their 'as-fabricated' state. However, while there are a number of non-sintered metallizations that have acceptable characteristics, the lack of a sintering step makes them vulnerable to a variety of environmentally induced degradation processes. The degrading effects resulting from the exposure of unsintered devices to a humid environment and to a vacuum (space) environment are described. It is shown, further, that these effects are magnified by the presence of mechanical damage in the contact metallization. The means to avoid or prevent these degrading interactions are presented.

High energy density aluminum-oxygen cell

NASA Technical Reports Server (NTRS)

Rudd, E. J.; Gibbons, D. W.

1993-01-01

An alternative to a secondary battery as the power source for vehicle propulsion is a fuel cell. An example of this is the metal-air fuel cell using metals such as aluminum, zinc, or iron. Aluminum is a particularly attractive candidate, having high energy and power densities, being environmentally acceptable, and having a large, established industrial base for production and distribution. An aluminum-oxygen system is currently under development for a UUV test vehicle, and recent work has focussed upon low corrosion aluminum alloys and an electrolyte management system for processing the by-products of the energy-producing reactions. This paper summarizes the progress made in both areas. Anode materials capable of providing high utilization factors over current densities ranging from S to 150 mA/sq cm have been identified. These materials are essential to realizing an acceptable mission life for the UUV. With respect to the electrolyte management system, a filter/precipitator unit has been successfully operated for over 250 hours in a large scale, half-cell system.

Heavy Metal Phytoremediation: Microbial Indicators of Soil Health for the Assessment of Remediation Efficiency

NASA Astrophysics Data System (ADS)

Epelde, Lur; Ma Becerril, José; Alkorta, Itziar; Garbisu, Carlos

Phytoremediation is an effective, non-intrusive, inexpensive, aesthetically pleasing, socially accepted, promising phytotechnology for the remediation of polluted soils. The objective of any soil remediation process must be not only to remove the contaminant(s) from the soil but, most importantly, to restore the continued capacity of the soil to perform or function according to its potential (i.e., to recover soil health). Hence, indicators of soil health are needed to properly assess the efficiency of a phytoremediation process. Biological indicators of soil health, especially those related to the size, activity and diversity of the soil microbial communities, are becoming increasingly used, due to their sensitivity and capacity to provide information that integrates many environmental factors. In particular, microbial indicators of soil health are valid tools to evaluate the success of metal phytoremediation procedures such as phytoextraction and phytostabilization processes.

Meeting the challenge of policy-relevant science: lessons from a water resource project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamb, B.L.

Water resources scientists face complex tasks in evaluating aspects of water projects, but relatively few assessment procedures have been applied and accepted as standards applications. Decision-makers often rely on environmental assessments to evaluate the value and operation of projects. There is often confusion about scientists' role in policy decisions. The scientist can affect policy-making as an expert witness, an advocate or a surrogate. By understanding the policy process, scientists can make their work more policy relevant. Using the Terror Lake hydro project in Alaska as a guide, three lessons are discussed: (1) not all problems are able to be solvedmore » with technology; (2) policy-relevant technology is rarely imposed on a problem; and (3) the scientist need not just to react to the policy process, but can have an impact on how that process unfolds.« less

Processes to remove acid forming gases from exhaust gases

DOEpatents

Chang, S.G.

1994-09-20

The present invention relates to a process for reducing the concentration of NO in a gas, which process comprises: (A) contacting a gas sample containing NO with a gaseous oxidizing agent to oxidize the NO to NO[sub 2]; (B) contacting the gas sample of step (A) comprising NO[sub 2] with an aqueous reagent of bisulfite/sulfite and a compound selected from urea, sulfamic acid, hydrazinium ion, hydrazoic acid, nitroaniline, sulfanilamide, sulfanilic acid, mercaptopropanoic acid, mercaptosuccinic acid, cysteine or combinations thereof at between about 0 and 100 C at a pH of between about 1 and 7 for between about 0.01 and 60 sec; and (C) optionally contacting the reaction product of step (A) with conventional chemical reagents to reduce the concentrations of the organic products of the reaction in step (B) to environmentally acceptable levels. Urea or sulfamic acid are preferred, especially sulfamic acid, and step (C) is not necessary or performed. 16 figs.

Effects of Cold Plasma on Food Quality: A Review.

PubMed

Pankaj, Shashi K; Wan, Zifan; Keener, Kevin M

2018-01-01

Cold plasma (CP) technology has proven very effective as an alternative tool for food decontamination and shelf-life extension. The impact of CP on food quality is very crucial for its acceptance as an alternative food processing technology. Due to the non-thermal nature, CP treatments have shown no or minimal impacts on the physical, chemical, nutritional and sensory attributes of various products. This review also discusses the negative impacts and limitations posed by CP technology for food products. The limited studies on interactions of CP species with food components at the molecular level offers future research opportunities. It also highlights the need for optimization studies to mitigate the negative impacts on visual, chemical, nutritional and functional properties of food products. The design versatility, non-thermal, economical and environmentally friendly nature of CP offers unique advantages over traditional processing technologies. However, CP processing is still in its nascent form and needs further research to reach its potential.

[Structures and processes in outpatient neurorehabilitation].

PubMed

Pöppl, Dominik; Deck, R; Kringler, W; Reuther, P

2014-06-01

Quality of structures, processes and outcome are commonly accepted as dimensions of quality management and quality assurance. Data of structures and processes are not published to date for German outpatient neurorehabilitation. Rehabilitative care and service providers are legally bound to apply concepts of quality management and quality assurance. The service providers pass recommendations, which have to be implemented by outpatient neurorehabilitation centres. Data analysis of existing structures and processes in outpatient neurorehabilitation centres are embedded as a part of a long-term multicentres outcome study. 22 outpatient neurorehabilitation centres participated in an online survey with 227 items using the google tool "Docs" between September and December 2011. Following issues were asked: general information about the centres (e. g. date of establishment, number of therapy places, kind of patients, responsible organization), utility supply contracts with service providers, local cooperation and networking, staff and equipment and appliances, treatment concepts, processes of therapy (e. g. individual and group therapy, frequency, concentration, planning), team processes, goals and team development, quality management and documentation. In the meantime outpatient centres of neurorehabilitation are well-established as care providers and commonly accepted by service providers. However a comprehensive availability does not exist. The results show comparable structures of the centres, what is mostly determined by the service provider audited regulatory framework. Different concepts result in different processes. There are a lot of hints with respect to different concepts in form and content to implement the legally obligated mandate. In general their work with context -factors is still a frequently unused potential. It can be countered by the therapeutic inclusion of the social and environmental living conditions of the patients. © Georg Thieme Verlag KG Stuttgart · New York.

21 CFR 820.80 - Receiving, in-process, and finished device acceptance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Receiving, in-process, and finished device acceptance. 820.80 Section 820.80 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... acceptance to ensure that each production run, lot, or batch of finished devices meets acceptance criteria...

21 CFR 820.80 - Receiving, in-process, and finished device acceptance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Receiving, in-process, and finished device acceptance. 820.80 Section 820.80 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... acceptance to ensure that each production run, lot, or batch of finished devices meets acceptance criteria...

75 FR 8942 - Maneb; Product Cancellation Order for Certain Pesticide Registrations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

... including environmental, human health, and agricultural advocates; the chemical industry; pesticide users... Order for Certain Pesticide Registrations AGENCY: Environmental Protection Agency (EPA). ACTION: Order... and accepted by the Agency, of products containing the pesticide maneb, pursuant to section 6(f)(1) of...

40 CFR 164.122 - Final order and order of suspension.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 164.122 Section 164.122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... RODENTICIDE ACT, ARISING FROM REFUSALS TO REGISTER, CANCELLATIONS OF REGISTRATIONS, CHANGES OF CLASSIFICATIONS... Environmental Appeals Board shall issue a final decision and order. Such final order may accept or reject in...

40 CFR 164.122 - Final order and order of suspension.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 164.122 Section 164.122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... RODENTICIDE ACT, ARISING FROM REFUSALS TO REGISTER, CANCELLATIONS OF REGISTRATIONS, CHANGES OF CLASSIFICATIONS... Environmental Appeals Board shall issue a final decision and order. Such final order may accept or reject in...

Environmental Test Screening Procedure

NASA Technical Reports Server (NTRS)

Zeidler, Janet

2000-01-01

This procedure describes the methods to be used for environmental stress screening (ESS) of the Lightning Mapper Sensor (LMS) lens assembly. Unless otherwise specified, the procedures shall be completed in the order listed, prior to performance of the Acceptance Test Procedure (ATP). The first unit, S/N 001, will be subjected to the Qualification Vibration Levels, while the remainder will be tested at the Operational Level. Prior to ESS, all units will undergo Pre-ESS Functional Testing that includes measuring the on-axis and plus or minus 0.95 full field Modulation Transfer Function and Back Focal Length. Next, all units will undergo ESS testing, and then Acceptance testing per PR 460.

Examining the technology acceptance for dismantling of waste printed circuit boards in light of recycling and environmental concerns.

PubMed

Duan, Huabo; Hou, Kun; Li, Jinhui; Zhu, Xiaodong

2011-03-01

The dismantling of printed circuit board assemblies (PCBAs) and the recovery of their useful materials can lead to serious environmental impacts mainly due to their complicated physical structure and the variety of toxic elements contained in their material composition. So far, less attention has been paid to their responsible recycling compared to that of bare printed circuit boards. Combined with other materials recovery process, proper dismantling of PCBAs is beneficial to conserve scarce resources, reuse the components, and eliminate or safely dispose of hazardous materials. In analyzing the generation, resources potential and hazardous risk of scrap PCBAs, technologies used for the dismantling of waste PCBAs have been widely investigated and reviewed from the aspects of both industrial application and laboratory-scale studies. In addition, the feasibility of PCBA dismantling has been discussed, the determinants of which, including the heating conditions and mechanical properties have been identified. Moreover, this paper evaluates the environmental consequences caused by the dismantling of PCBAs. Copyright © 2010 Elsevier Ltd. All rights reserved.

Pathways between Parent-Child Interactions and Peer Acceptance: The Role of Children's Social Information Processing

ERIC Educational Resources Information Center

Rah, Yumee; Parke, Ross D.

2008-01-01

This study examined the links among parents' interaction styles, their children's social information processing, and peer acceptance. Fourth-grade children (N = 159) and their parents were observed during family discussions. One year later peer acceptance and children's information processing choices (goals, strategies, and attributions) in…

A Holistic Framework for Environmental Flows Determination in Hydropower Contexts

DOE Office of Scientific and Technical Information (OSTI.GOV)

McManamay, Ryan A; Bevelhimer, Mark S

2013-05-01

Among the ecological science community, the consensus view is that the natural flow regime sustains the ecological integrity of river systems. This prevailing viewpoint by many environmental stakeholders has progressively led to increased pressure on hydropower dam owners to change plant operations to affect downstream river flows with the intention of providing better conditions for aquatic biological communities. Identifying the neccessary magnitude, frequency, duration, timing, or rate of change of stream flows to meet ecological needs in a hydropower context is challenging because the ecological responses to changes in flows may not be fully known, there are usually a multitudemore » of competing users of flow, and implementing environmental flows usually comes at a price to energy production. Realistically, hydropower managers must develop a reduced set of goals that provide the most benefit to the identified ecological needs. As a part of the Department of Energy (DOE) Water Power Program, the Instream Flow Project (IFP) was carried out by Oak Ridge National Laboratory (ORNL), Pacific Northwest National Laboratory (PNNL), and Argon National Laboratory (ANL) as an attempt to develop tools aimed at defining environmental flow needs for hydropower operations. The application of these tools ranges from national to site-specific scales; thus, the utility of each tool will depend on various phases of the environmental flow process. Given the complexity and sheer volume of applications used to determine environmentally acceptable flows for hydropower, a framework is needed to organize efforts into a staged process dependent upon spatial, temporal, and functional attributes. By far, the predominant domain for determining environmental flows related to hydropower is within the Federal Energy Regulatory Commission (FERC) relicensing process. This process can take multiple years and can be very expensive depending on the scale of each hydropower project. The utility of such a framework is that it can expedite the environmental flow process by 1) organizing data and applications to identify predictable relationships between flows and ecology, and 2) suggesting when and where tools should be used in the environmental flow process. In addition to regulatory procedures, a framework should also provide the coordination for a comprehensive research agenda to guide the science of environmental flows. This research program has further reaching benefits than just environmental flow determination by providing modeling applications, data, and geospatial layers to inform potential hydropower development. We address several objectives within this document that highlight the limitations of existing environmental flow paradigms and their applications to hydropower while presenting a new framework catered towards hydropower needs. Herein, we address the following objectives: 1) Provide a brief overview of the Natural Flow Regime paradigm and existing environmental flow frameworks that have been used to determine ecologically sensitive stream flows for hydropower operations. 2) Describe a new conceptual framework to aid in determining flows needed to meet ecological objectives with regard to hydropower operations. The framework is centralized around determining predictable relationships between flow and ecological responses. 3) Provide evidence of how efforts from ORNL, PNNL, and ANL have filled some of the gaps in this broader framework, and suggest how the framework can be used to set the stage for a research agenda for environmental flow.« less

SU-F-T-475: An Evaluation of the Overlap Between the Acceptance Testing and Commissioning Processes for Conventional Medical Linear Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, A; Rangaraj, D; Perez-Andujar, A

2016-06-15

Purpose: This work’s objective is to determine the overlap of processes, in terms of sub-processes and time, between acceptance testing and commissioning of a conventional medical linear accelerator and to evaluate the time saved by consolidating the two processes. Method: A process map for acceptance testing for medical linear accelerators was created from vendor documentation (Varian and Elekta). Using AAPM TG-106 and inhouse commissioning procedures, a process map was created for commissioning of said accelerators. The time to complete each sub-process in each process map was evaluated. Redundancies in the processes were found and the time spent on each weremore » calculated. Results: Mechanical testing significantly overlaps between the two processes - redundant work here amounts to 9.5 hours. Many beam non-scanning dosimetry tests overlap resulting in another 6 hours of overlap. Beam scanning overlaps somewhat - acceptance tests include evaluating PDDs and multiple profiles but for only one field size while commissioning beam scanning includes multiple field sizes and depths of profiles. This overlap results in another 6 hours of rework. Absolute dosimetry, field outputs, and end to end tests are not done at all in acceptance testing. Finally, all imaging tests done in acceptance are repeated in commissioning, resulting in about 8 hours of rework. The total time overlap between the two processes is about 30 hours. Conclusion: The process mapping done in this study shows that there are no tests done in acceptance testing that are not also recommended to do for commissioning. This results in about 30 hours of redundant work when preparing a conventional linear accelerator for clinical use. Considering these findings in the context of the 5000 linacs in the United states, consolidating acceptance testing and commissioning would have allowed for the treatment of an additional 25000 patients using no additional resources.« less

Woody biomass outreach in the southern United States: A case study

Treesearch

Martha Monroe; Annie Oxarart

2011-01-01

Woody biomass is one potential renewable energy source that is technically feasible where environmental and economic factors are promising. It becomes a realistic option when it is also socially acceptable. Public acceptance and support of wood to energy proposals require community education and outreach. The Wood to Energy Outreach Program provides science-based...

Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst.

PubMed

Tripathi, Pranav K; Durbach, Shane; Coville, Neil J

2017-09-22

The disposal of non-biodegradable plastic waste without further upgrading/downgrading is not environmentally acceptable and many methods to overcome the problem have been proposed. Herein we indicate a simple method to make high-value nanomaterials from plastic waste as a partial solution to the environmental problem. Laboratory-based waste centrifuge tubes made of polypropylene were chosen as a carbon source to show the process principle. In the process, multi-walled carbon nanotubes (MWCNTs) were synthesized from plastic waste in a two-stage stainless steel 316 (SS 316) metal tube that acted as both reactor vessel and catalyst. The steel reactor contains Fe (and Ni, and various alloys), which act as the catalyst for the carbon conversion process. The reaction and products were studied using electron probe microanalysis, thermogravimetric analysis, Raman spectroscopy and transmission electron microscopy and scanning electron microscopy. Optimization studies to determine the effect of different parameters on the process showed that the highest yield and most graphitized MWCNTs were formed at 900 °C under the reaction conditions used (yield 42%; Raman I D / I G ratio = 0.48). The high quality and high yield of the MWCNTs that were produced in a flow reactor from plastic waste using a two stage SS 316 chemical vapor deposition (CVD) furnace did not require the use of an added catalyst.

Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst

PubMed Central

Durbach, Shane

2017-01-01

The disposal of non-biodegradable plastic waste without further upgrading/downgrading is not environmentally acceptable and many methods to overcome the problem have been proposed. Herein we indicate a simple method to make high-value nanomaterials from plastic waste as a partial solution to the environmental problem. Laboratory-based waste centrifuge tubes made of polypropylene were chosen as a carbon source to show the process principle. In the process, multi-walled carbon nanotubes (MWCNTs) were synthesized from plastic waste in a two-stage stainless steel 316 (SS 316) metal tube that acted as both reactor vessel and catalyst. The steel reactor contains Fe (and Ni, and various alloys), which act as the catalyst for the carbon conversion process. The reaction and products were studied using electron probe microanalysis, thermogravimetric analysis, Raman spectroscopy and transmission electron microscopy and scanning electron microscopy. Optimization studies to determine the effect of different parameters on the process showed that the highest yield and most graphitized MWCNTs were formed at 900 °C under the reaction conditions used (yield 42%; Raman ID/IG ratio = 0.48). The high quality and high yield of the MWCNTs that were produced in a flow reactor from plastic waste using a two stage SS 316 chemical vapor deposition (CVD) furnace did not require the use of an added catalyst. PMID:28937596

What is a good public participation process? Five perspectives from the public.

PubMed

Webler, T; Tuler, S; Krueger, R

2001-03-01

It is now widely accepted that members of the public should be involved in environmental decision-making. This has inspired many to search for principles that characterize good public participation processes. In this paper we report on a study that identifies discourses about what defines a good process. Our case study was a forest planning process in northern New England and New York. We employed Q methodology to learn how participants characterize a good process differently, by selecting, defining, and privileging different principles. Five discourses, or perspectives, about good process emerged from our study. One perspective emphasizes that a good process acquires and maintains popular legitimacy. A second sees a good process as one that facilitates an ideological discussion. A third focuses on the fairness of the process. A fourth perspective conceptualizes participatory processes as a power struggle--in this instance a power play between local land-owning interests and outsiders. A fifth perspective highlights the need for leadership and compromise. Dramatic differences among these views suggest an important challenge for those responsible for designing and carrying out public participation processes. Conflicts may emerge about process designs because people disagree about what is good in specific contexts.

Application of territorial GIS to study of natural environment for regions under mining exploitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirsanov, A.

1996-07-01

Mineral resources exploitation becomes one of the leading factors of technogenic impact to natural environment. The processes accompanying exploitation lead to changes of geological/geomorphological, engineering/geological, hydrogeological, geochemical and landscape conditions over the large territories surrounded mining exploitation districts. The types of environmental changes and disturbances are stipulated by several reasons such as kind of exploited resources (ore, petroleum, gas, coal, peat, building materials etc.); the ways of extraction (opened by quarry or closed by mine); natural zone (tundra, taiga, steppe, desert etc.). Expressive revelation and control of these environmental changes is impossible without wide using and analysis of various typesmore » and different times materials of airborne and satellite surveys (MASS). They are the basis of system approach to environmental study because of image is the decreased spatial model of territory. For integrated estimation of natural resources and perspectives of its economical profit using, as well as examination of influence of extraction objects to natural environment necessary to involve different data. Only territorial GIS permits to solve the tasks of collection, keeping, processing and analysis of this data as well as to conduct modelling of situations and presentation of information necessary to accept the decision. The core of GIS is the Data base which consists of initial remote sensing and cartographic data allow in completely obtain various information providing of full value and objectivity of investigations.« less

Acceptance and Avoidance Processes at Different Levels of Psychological Recovery from Enduring Mental Illness.

PubMed

Siqueira, Vinicius R; Oades, Lindsay G

2015-01-01

Objective. This study examined the use of psychological acceptance and experiential avoidance, two key concepts of Acceptance and Commitment Therapy (ACT), in the psychological recovery process of people with enduring mental illness. Method. Sixty-seven participants were recruited from the metropolitan, regional, and rural areas of New South Wales, Australia. They all presented some form of chronic mental illness (at least 12 months) as reflected in DSM-IV Axis I diagnostic criteria. The Acceptance and Action Questionnaire (AAQ-19) was used to measure the presence of psychological acceptance and experiential avoidance; the Recovery Assessment Scale (RAS) was used to examine the levels of psychological recovery; and the Scales of Psychological Well-Being was used to observe if there are benefits in utilizing psychological acceptance and experiential avoidance in the recovery process. Results. An analysis of objectively quantifiable measures found no clear correlation between the use of psychological acceptance and recovery in mental illness as measured by the RAS. The data, however, showed a relationship between psychological acceptance and some components of recovery, thereby demonstrating its possible value in the recovery process. Conclusion. The major contribution of this research was the emerging correlation that was observed between psychological acceptance and positive levels of psychological well-being among individuals with mental illness.

Application of microwave energy in the control of DPM, oxides of nitrogen and VOC emissions

NASA Astrophysics Data System (ADS)

Pallavkar, Sameer M.

The emissions of DPM (diesel particulate matter), NOx (oxides of nitrogen), and toxic VOCs (volatile organic compounds) from diesel engine exhaust gases and other sources such as chemical process industry and manufacturing industry have been a great environmental and health concern. Most control technologies for these emissions require elevated temperatures. The use of microwave energy as a source of heat energy, however, has not been fully explored. In this study, the microwave energy was used as the energy source in three separate emission control processes, namely, the regeneration of diesel particulate filter (DPF) for DPM control, the NOx reduction using a platinum catalyst, and the VOC destruction involving a ceramic based material. The study has demonstrated that microwave heating is an effective method in providing heat for the studied processes. The control efficiencies associated with the microwave-assisted processes have been observed to be high and acceptable. Further research, however, is required for the commercial use of these technologies.

Optimisation study of a vehicle bumper subsystem with fuzzy parameters

NASA Astrophysics Data System (ADS)

Farkas, L.; Moens, D.; Donders, S.; Vandepitte, D.

2012-10-01

This paper deals with the design and optimisation for crashworthiness of a vehicle bumper subsystem, which is a key scenario for vehicle component design. The automotive manufacturers and suppliers have to find optimal design solutions for such subsystems that comply with the conflicting requirements of the regulatory bodies regarding functional performance (safety and repairability) and regarding the environmental impact (mass). For the bumper design challenge, an integrated methodology for multi-attribute design engineering of mechanical structures is set up. The integrated process captures the various tasks that are usually performed manually, this way facilitating the automated design iterations for optimisation. Subsequently, an optimisation process is applied that takes the effect of parametric uncertainties into account, such that the system level of failure possibility is acceptable. This optimisation process is referred to as possibility-based design optimisation and integrates the fuzzy FE analysis applied for the uncertainty treatment in crash simulations. This process is the counterpart of the reliability-based design optimisation used in a probabilistic context with statistically defined parameters (variabilities).

GROUNDWATER RECHARGE AND CHEMICAL ...

EPA Pesticide Factsheets

The existing knowledge base regarding the presence and significance of chemicals foreign to the subsurface environment is large and growing -the papers in this volume serving as recent testament. But complex questions with few answers surround the unknowns regarding the potential for environmental or human health effects from trace levels of xenobiotics in groundwater, especially groundwater augmented with treated wastewater. Public acceptance for direct or indirect groundwater recharge using treated municipal wastewater ( especially sewage) spans the spectrum from unquestioned embrace to outright rejection. In this article, I detour around the issues most commonly discussed for groundwater recharge and instead focus on some of the less-recognized issues- those that emanate from the mysteries created at the many literal and virtual interfaces involved with the subsurface world. My major objective is to catalyze discussion that advances our understanding of the barriers to public acceptance of wastewater reuse -with its ultimate culmination in direct reuse for drinking. I pose what could be a key question as to whether much of the public's frustration or ambivalence in its decision making process for accepting or rejecting water reuse (for various purposes including personal use) emanates from fundamental inaccuracies, misrepresentation, or oversimplification of what water 'is' and how it functions in the environment -just what exactly is the 'water cyc

US/UK Loan Account Project Status PMOD477

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, Patrice A.

2012-07-12

The viewgraphs describe the status of PMOD477 for LANL. The meeting will occur at DOE-HQ with NA-11 and Military Applications personnel in attendance. Serves to repatriate material with a balance to zero by December 2012. Phase 1 -- Establish formality of operations for War Reserve (WR): Complete surrogate taskings to A90 through a Materials Channel and perform US/UK lessons learned; Complete the US/UK agreed Quality Acceptance Plan, Materials Plan, Shipping procedure, and establish the formal UK/US point of contacts. Phase 2 -- Metal Manufacture (WR): Process material and store material as electrorefined metal (ER) rings, with initial assay and isotopicmore » analysis, prior to manufacturing. Material is cast into accepted configuration and appropriate acceptance document for each aliquot will be generated. Phase 3 -- Intermediate Material Manufacture, Packaging and Shipping (WR): Continue processing of the material in accepted configuration with appropriate acceptance documentation for each aliquot. Provide an initial tasking of the material owed to UK including appropriate quality acceptance documentation. Phase 4 -- Complete Tasking (WR). Phase 5 -- Residue Processing (Non-WR): Complete processing of residue material and waste into accepted configuration with appropriate acceptance document for disposal.« less

Working the Dark Edges

ERIC Educational Resources Information Center

Weston, Anthony

2014-01-01

Environmentalism's wider and wilder possibilities today appear as regions of seeming darkness that bracket or frame acceptable environmental thinking. One of these barely-mentionable darknesses is outer space--the cosmos. Another is the inner and chthonic powers of the land and natural beings generally. This essay aims to bring these two kinds of…

Resources, Number 39. Some Highlights of 1971.

ERIC Educational Resources Information Center

Resources for the Future, Inc., Washington, DC.

Focusing on some significant events of 1971 relating to the use and management of natural resources, this report points out that environmental concern is coming of age. Government activities, congressional messages and action, major court cases, and citizen action are reviewed in the light of growing public acceptance of environmental quality as…

Genetically-engineered baculovirus pesticides and their environmental safety

Treesearch

H. Alan Wood; Yu Zailin

1991-01-01

Baculoviruses such as the Lymantria dispar nuclear polyhedrosis virus (LdMNPV) are ecologically attractive alternatives to chemical insect pesticides but have a slow rate of control. To overcome this we have developed and are field testing an environmentally acceptable strategy which can be used for the introduction and expression of pesticide-...

TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

EPA Science Inventory

The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

The "New Environmental Paradigm"

ERIC Educational Resources Information Center

Dunlap, Riley E.; Van Liere, Kent D.

2008-01-01

The "New Environmental Paradigm" or NEP appears to have gained considerable popularity in academic and intellectual circles, as well as among many college students; however, very little is known concerning the degree to which the general public has come to accept the ideas embodied in it. Thus, although there have been dozens of studies…

10 CFR 503.34 - Inability to comply with applicable environmental requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... environmental compliance of the facility, including an analysis of its ability to meet applicable standards and... will be based solely on an analysis of the petitioner's capacity to physically achieve applicable... exemption. All such analysis must be based on accepted analytical techniques, such as air quality modeling...

10 CFR 503.34 - Inability to comply with applicable environmental requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... environmental compliance of the facility, including an analysis of its ability to meet applicable standards and... will be based solely on an analysis of the petitioner's capacity to physically achieve applicable... exemption. All such analysis must be based on accepted analytical techniques, such as air quality modeling...

Why the WTA - WTP disparity matters

Treesearch

Brown Thomas C.; Gregory R.

1999-01-01

The disparity between willingness to pay (WTP) and willingness to accept compensation (WTA) has been demonstrated repeatedly. Because using WTP estimates of value where a WTA estimate is appropriate tends to undervalue environmental assets, this issue is important to environmental managers. We summarize reasons for the disparity and then discuss some of the...

Addressing critical environmental data gaps via low-cost, real-time, cellular-based environmental monitoring

NASA Astrophysics Data System (ADS)

Caylor, K. K.; Wolf, A.; Siegfried, B.

2014-12-01

Models in the environmental sciences are repositories in a sense of the current state of understanding of critical processes. However, as our understanding of these processes (and their accompanying models) become more granular, the data requirements to parameterize them become more limiting. In addition, as these models become more useful, they are often pressed into service for decision support, meaning that they cannot accept the data latency typical of most environmental observations. Finally, the vast majority of environmental data is generated at highly-instrumented, infrastructure-rich "mega sites" in the US/Europe, while many of the most pressing environmental issues are in rural locales and in the developing world. Cellular-based environmental sensing is a promising means to provide granular data in real time from remote locales to improve model-based forecasting using data assimilation. Applications we are working on include drought forecasting and food security; forest and crop responses to weather and climate change; and rural water usage. Over the past two years, we have developed a suite of integrated hardware, firmware, and backend APIs that accommodates an unlimited variety of sensors, and propagates these data onto the internet over mobile networks. Scientific data holds a unique role for demanding well-characterized information on sensor error and our design attempts to balance error reduction with low costs. The result is a deployment system that undercuts competing commercial products by as much as 90%, allowing more ubiquitous deployment with lower risks associated with sensor loss. Enclosure design and power management are critical ingredients for remote deployments under variable environmental conditions. Sensors push data onto cloud storage and make this data available via public API's via a backend server that accommodates additional metadata essential for interpreting observations, particularly their measurement errors. The data these pods collect can expand weather monitoring, but more crucially can monitor otherwise unobserved biological (including human) responses to environmental drivers. These data in turn can be assimilated into models, as a means to contextualize and distill these noisy observations into actionable knowledge.

Sinks as integrative elements of the anthropogenic metabolism

NASA Astrophysics Data System (ADS)

Kral, Ulrich; Brunner, Paul H.

2015-04-01

The anthropogenic metabolism is an open system requiring exchange of materials and energy between the anthroposphere and the environment. Material and energy flows are taken from nature and become utilized by men. After utilization, the materials either remain in the anthroposphere as recycling products, or they leave the anthroposphere as waste and emission flows. To accommodate these materials without jeopardizing human and environmental health, limited natural sinks are available; thus, man-made sinks have to be provided where natural sinks are missing or overloaded. The oral presentation (1) suggests a coherent definition of the term "sink", encompassing natural and man-made processes, (2) presents a framework to analyse and evaluate anthropogenic material flows to sinks, based on the tool substance flow analysis and impact assessment methodology, and (3) applies the framework in a case study approach for selected substances such as Copper and Lead in Vienna and Perfluorooctane sulfonate in Switzerland. Finally, the numeric results are aggregated in terms of a new indicator that specifies on a regional scale which fractions of anthropogenic material flows to sinks are acceptable. The following results are obtained: In Vienna, 99% of Cu flows to natural and man-made sinks are in accordance with accepted standards. However, the 0.7% of Cu entering urban soils and the 0.3% entering receiving waters surpass the acceptable level. In the case of Pb, 92% of all flows into sinks prove to be acceptable, but 8% are disposed of in local landfills with limited capacity. For PFOS, 96% of all flows into sinks are acceptable. 4% cannot be evaluated due to a lack of normative criteria, despite posing a risk for human health and the environment. The case studies corroborate the need and constraints of sinks to accommodate inevitable anthropogenic material flows.

Australians' views on carbon pricing before and after the 2013 federal election

NASA Astrophysics Data System (ADS)

Dreyer, Stacia J.; Walker, Iain; McCoy, Shannon K.; Teisl, Mario F.

2015-12-01

As climate policies change through the legislative process, public attitudes towards them may change as well. Therefore, it is important to assess how people accept and support controversial climate policies as the policies change over time. Policy acceptance is a positive evaluation of, or attitude towards, an existing policy; policy support adds an active behavioural component. Acceptance does not necessarily lead to support. We conducted a national survey of Australian residents to investigate acceptance of, and support for, the Australian carbon pricing policy before and after the 2013 federal election, and how perceptions of the policy, economic ideology, and voting behaviour affect acceptance and support. We found acceptance and support were stable across the election period, which was surprising given that climate policy was highly contentious during the election. Policy acceptance was higher than policy support at both times and acceptance was a necessary but insufficient condition of support. We conclude that acceptance is an important process through which perceptions of the policy and economic ideology influence support. Therefore, future climate policy research needs to distinguish between acceptance and support to better understand this process, and to better measure these concepts.

Draft environmental assessment: Lavender Canyon site, Utah. Nuclear Waste Policy Act (Section 112). [Contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-12-01

In February 1983, the US Department of Energy (DOE) identified the Lavender Canyon site in Utah, as one of nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Lavender Canyon site and the eight other potentially acceptable sites h

Improving diet sustainability through evolution of food choices: review of epidemiological studies on the environmental impact of diets.

PubMed

Perignon, Marlène; Vieux, Florent; Soler, Louis-Georges; Masset, Gabriel; Darmon, Nicole

2017-01-01

The Food and Agriculture Organization defines sustainable diets as nutritionally adequate, safe, healthy, culturally acceptable, economically affordable diets that have little environmental impact. This review summarizes the studies assessing, at the individual level, both the environmental impact and the nutritional quality or healthiness of self-selected diets. Reductions in meat consumption and energy intake were identified as primary factors for reducing diet-related greenhouse gas emissions. The choice of foods to replace meat, however, was crucial, with some isocaloric substitutions possibly increasing total diet greenhouse gas emissions. Moreover, nutritional adequacy was rarely or only partially assessed, thereby compromising the assessment of diet sustainability. Furthermore, high nutritional quality was not necessarily associated with affordability or lower environmental impact. Hence, when identifying sustainable diets, each dimension needs to be assessed by relevant indicators. Finally, some nonvegetarian self-selected diets consumed by a substantial fraction of the population showed good compatibility with the nutritional, environmental, affordability, and acceptability dimensions. Altogether, the reviewed studies revealed the scarcity of standardized nationally representative data for food prices and environmental indicators and suggest that diet sustainability might be increased without drastic dietary changes. © The Author(s) 2016. Published by Oxford University Press on behalf of the International Life Sciences Institute.

Medications at school: disposing of pharmaceutical waste.

PubMed

Taras, Howard; Haste, Nina M; Berry, Angela T; Tran, Jennifer; Singh, Renu F

2014-03-01

This project quantified and categorized medications left unclaimed by students at the end of the school year. It determined the feasibility of a model medication disposal program and assessed school nurses' perceptions of environmentally responsible medication disposal. At a large urban school district all unclaimed medications were collected at the end of a school year to determine the extent and nature of this problem. Nurses documented unclaimed medications and transported them to a central district location. An environmentally responsible medication disposal program, consisting of sealed containers bound for a local hospital's disposal system, was implemented. In a school district of approximately 133,000 students, there were 926 different medications abandoned at the end of a school year brought to a central disposal area. Nurses complied with the newly implemented protocol. Information collected from nurses indicates acceptance of the program. Disposal of unclaimed medications at a central location, use of secured containers, and transportation to a hospital for environmentally responsible disposal proved to be feasible and acceptable to the staff. Unclaimed medications at school each year pose a potentially huge environmental risk when disposed of improperly. It is feasible to implement an environmentally responsible medication disposal protocol at schools. © 2014, American School Health Association.

The use of life-cycle assessment to evaluate the environmental impacts of growing genetically modified, nitrogen use-efficient canola.

PubMed

Strange, Alison; Park, Julian; Bennett, Richard; Phipps, Richard

2008-05-01

Agriculture, particularly intensive crop production, makes a significant contribution to environmental pollution. A variety of canola (Brassica napus) has been genetically modified to enhance nitrogen use efficiency, effectively reducing the amount of fertilizer required for crop production. A partial life-cycle assessment adapted to crop production was used to assess the potential environmental impacts of growing genetically modified, nitrogen use-efficient (GMNUE) canola in North Dakota and Minnesota compared with a conventionally bred control variety. The analysis took into account the entire production system used to produce 1 tonne of canola. This comprised raw material extraction, processing and transportation, as well as all agricultural field operations. All emissions associated with the production of 1 tonne of canola were listed, aggregated and weighted in order to calculate the level of environmental impact. The findings show that there are a range of potential environmental benefits associated with growing GMNUE canola. These include reduced impacts on global warming, freshwater ecotoxicity, eutrophication and acidification. Given the large areas of canola grown in North America and, in particular, Canada, as well as the wide acceptance of genetically modified varieties in this area, there is the potential for GMNUE canola to reduce pollution from agriculture, with the largest reductions predicted to be in greenhouse gases and diffuse water pollution.

Managing produced water from coal seam gas projects: implications for an emerging industry in Australia.

PubMed

Davies, Peter J; Gore, Damian B; Khan, Stuart J

2015-07-01

This paper reviews the environmental problems, impacts and risks associated with the generation and disposal of produced water by the emerging coal seam gas (CSG) industry and how it may be relevant to Australia and similar physical settings. With only limited independent research on the potential environmental impacts of produced water, is it necessary for industry and government policy makers and regulators to draw upon the experiences of related endeavours such as mining and groundwater extraction accepting that the conclusions may not always be directly transferrable. CSG is widely touted in Australia as having the potential to provide significant economic and energy security benefits, yet the environmental and health policies and the planning and regulatory setting are yet to mature and are continuing to evolve amidst ongoing social and environmental concerns and political indecision. In this review, produced water has been defined as water that is brought to the land surface during the process of recovering methane gas from coal seams and includes water sourced from CSG wells as well as flowback water associated with drilling, hydraulic fracturing and gas extraction. A brief overview of produced water generation, its characteristics and environmental issues is provided. A review of past lessons and identification of potential risks, including disposal options, is included to assist in planning and management of this industry.

Perceived community environmental influences on eating behaviors: A Photovoice analysis.

PubMed

Belon, Ana Paula; Nieuwendyk, Laura M; Vallianatos, Helen; Nykiforuk, Candace I J

2016-12-01

People's perceptions of local food environments influence their abilities to eat healthily. PhotoVoice participants from four communities in Alberta, Canada took pictures of barriers and opportunities for healthy eating and shared their stories in one-on-one semi-structured interviews. Using a socioecological framework, emergent themes were organized by type and size of environment. Findings show that, while availability and access to food outlets influence healthy eating practices, these factors may be eclipsed by other non-physical environmental considerations, such as food regulations and socio-cultural preferences. This study identifies a set of meta-themes that summarize and illustrate the interrelationships between environmental attributes, people's perceptions, and eating behaviors: a) availability and accessibility are interrelated and only part of the healthy eating equation; b) local food is synonymous with healthy eating; c) local food places for healthy eating help define community identity; d) communal dining (commensality) does not necessarily mean healthy eating; e) rewarding an achievement or celebrating special occasions with highly processed foods is socially accepted; f) food costs seemed to be driving forces in food decisions; g) macro-environmental influences are latent in food decisions. Recognizing the interrelationship among multiple environmental factors may help efforts to design effective community-based interventions and address knowledge gaps on how sociocultural, economic, and political environments intersect with physical worlds. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Perceived community environmental influences on eating behaviors: A Photovoice analysis

PubMed Central

Belon, Ana Paula; Nieuwendyk, Laura M.; Vallianatos, Helen; Nykiforuk, Candace I.J.

2017-01-01

People’s perceptions of local food environments influence their abilities to eat healthily. PhotoVoice participants from four communities in Alberta, Canada took pictures of barriers and opportunities for healthy eating and shared their stories in one-on-one semi-structured interviews. Using a socioecological framework, emergent themes were organized by type and size of environment. Findings show that, while availability and access to food outlets influence healthy eating practices, these factors may be eclipsed by other non-physical environmental considerations, such as food regulations and sociocultural preferences. This study identifies a set of meta-themes that summarize and illustrate the interrelationships between environmental attributes, people’s perceptions, and eating behaviors: a) availability and accessibility are interrelated and only part of the healthy eating equation; b) local food is synonymous with healthy eating; c) local food places for healthy eating help define community identity; d) communal dining (commensality) does not necessarily mean healthy eating; e) rewarding an achievement or celebrating special occasions with highly processed foods is socially accepted; f) food costs seemed to be driving forces in food decisions; g) macro-environmental influences are latent in food decisions. Recognizing the interrelationship among multiple environmental factors may help efforts to design effective community-based interventions and address knowledge gaps on how sociocultural, economic, and political environments intersect with physical worlds. PMID:27863286

PREFACE: International Symposium on Materials Science and Innovation for Sustainable Society - Eco-Materials and Eco-Innovation for Global Sustainability - The 21st Iketani Conference 2011

NASA Astrophysics Data System (ADS)

Takahashi, Yasuo

2012-08-01

Conference logo The 21st century has been called the century of environmental revolution. Green innovations and environmentally friendly production systems based on physics, chemistry, materials science, and electronic engineering will be indispensable for ensuring renewable energy and establishing a sustainable society. In particular, production design, materials processing, and fabrication technologies such as welding and joining will be very important components of such green innovations. For these reasons, the International Symposium on Materials Science and Innovation for Sustainable Society - eco-materials and eco-innovation for global sustainability - (ECO-MATES 2011) was organized by the Joining and Welding Research Institute (JWRI) and the Center of Environmental Innovation Design for Sustainability (CEIDS), Osaka University. ECO-MATES 2011 was held at Hotel Hankyu Expo Park, Osaka, Japan from 28-30 November 2011. 435 participants from 20 countries around the world attended the symposium. 149 oral presentations including 60 invited talks and 160 posters were presented at the symposium to discuss the latest research and developments in green innovations in relation to environmental issues. The topics of the symposium covered all environmentally related fields including renewable energy, energy-materials, environment and resources, waste and biomass, power electronics, semiconductor, rare-earth metals, functional materials, organic electronics materials, electronics packaging, smart processing, joining and welding, eco-efficient processes, and green applied physics and chemistry. Therefore, 55 full papers concerning green innovations and environmentally benign production were selected and approved by the editorial board and the program committee of ECO-MATES 2011. All papers were accepted through peer review processes. I believe that all the papers have many informative contents. On behalf of the steering committee of the symposium, I would like to express my sincere appreciation to all the committees and secretariats, authors, participants of ECO-MATES 2011, and everybody involved in the publication of this special issue. It is a great honor for me that the special issue of Journal of Physics: Conference Series will contribute to establishing green innovations and a sustainable society. Chairman's signature Yasuo Takahashi Chairman of ECO-MATES 2011 Conference photograph ECO-MATES 2011 November 28-30, 2011 Venue: Hotel Hankyu Expo Park, Osaka, Japan The PDF also contains a list of the organizing committees.

Environmental Management and the New Politics of Western Water: The Animas-La Plata Project and Implementation of the Endangered Species Act.

PubMed

ELLISON

1999-05-01

/ This paper explores the new politics of western water policy through an examination of the Animas-La Plata water project and implementation of the Endangered Species Act. It is suggested that the focus of western water programming has shifted from the source of distributed funds, the United States Congress, to the agencies originally created to deliver federal benefits because funding for new project construction has not been forthcoming. Under this new system, members of Congress continue to excite their constituents with promises of money for new project starts, while the administrative agencies perform the myriad duties needed to keep these projects alive. The result is that political objectives have replaced operational/management objectives in administrative processes. In this case, the author demonstrates how resource managers in the Bureau of Reclamation manipulated hydrological analysis to control administrative process, why their manipulation was unfair, and perhaps illegal, and why biologists from the US Fish and Wildlife Service accepted the analysis. While ostensibly protecting all interests, the result is that none of the objectives of federal water programming are achieved. KEY WORDS: Environmental management; Administrative politics; Water policy; Endangered Species Act; Animas-La Plata, Bureau of Reclamation

5 CFR 850.301 - Electronic records; other acceptable records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SERVICE REGULATIONS (CONTINUED) ELECTRONIC RETIREMENT PROCESSING Records § 850.301 Electronic records; other acceptable records. (a) Acceptable electronic records for retirement and insurance processing by... (SF 2806 or SF 3100), or data or images obtained from such documents, including images stored in EDMS...

Application of Bayesian networks in a hierarchical structure for environmental risk assessment: a case study of the Gabric Dam, Iran.

PubMed

Malekmohammadi, Bahram; Tayebzadeh Moghadam, Negar

2018-04-13

Environmental risk assessment (ERA) is a commonly used, effective tool applied to reduce adverse effects of environmental risk factors. In this study, ERA was investigated using the Bayesian network (BN) model based on a hierarchical structure of variables in an influence diagram (ID). ID facilitated ranking of the different alternatives under uncertainty that were then used to evaluate comparisons of the different risk factors. BN was used to present a new model for ERA applicable to complicated development projects such as dam construction. The methodology was applied to the Gabric Dam, in southern Iran. The main environmental risk factors in the region, presented by the Gabric Dam, were identified based on the Delphi technique and specific features of the study area. These included the following: flood, water pollution, earthquake, changes in land use, erosion and sedimentation, effects on the population, and ecosensitivity. These risk factors were then categorized based on results from the output decision node of the BN, including expected utility values for risk factors in the decision node. ERA was performed for the Gabric Dam using the analytical hierarchy process (AHP) method to compare results of BN modeling with those of conventional methods. Results determined that a BN-based hierarchical structure to ERA present acceptable and reasonable risk assessment prioritization in proposing suitable solutions to reduce environmental risks and can be used as a powerful decision support system for evaluating environmental risks.

Consumer acceptance of cultured meat: A systematic review.

PubMed

Bryant, Christopher; Barnett, Julie

2018-09-01

Cultured meat grown in-vitro from animal cells is being developed as a way of addressing many of the ethical and environmental concerns associated with conventional meat production. As commercialisation of this technology appears increasingly feasible, there is growing interest in the research on consumer acceptance of cultured meat. We present a systematic review of the peer-reviewed literature, and synthesize and analyse the findings of 14 empirical studies. We highlight demographic variations in consumer acceptance, factors influencing acceptance, common consumer objections, perceived benefits, and areas of uncertainty. We conclude by evaluating the most important objections and benefits to consumers, as well as highlighting areas for future research. Copyright © 2018 Elsevier Ltd. All rights reserved.

Estimating the environmental and resource costs of leakage in water distribution systems: A shadow price approach.

PubMed

Molinos-Senante, María; Mocholí-Arce, Manuel; Sala-Garrido, Ramon

2016-10-15

Water scarcity is one of the main problems faced by many regions in the XXIst century. In this context, the need to reduce leakages from water distribution systems has gained almost universal acceptance. The concept of sustainable economic level of leakage (SELL) has been proposed to internalize the environmental and resource costs within economic level of leakage calculations. However, because these costs are not set by the market, they have not often been calculated. In this paper, the directional-distance function was used to estimate the shadow price of leakages as a proxy of their environmental and resource costs. This is a pioneering approach to the economic valuation of leakage externalities. An empirical application was carried out for the main Chilean water companies. The estimated results indicated that for 2014, the average shadow price of leakages was approximately 32% of the price of the water delivered. Moreover, as a sensitivity analysis, the shadow prices of the leakages were calculated from the perspective of the water companies' managers and the regulator. The methodology and findings of this study are essential for supporting the decision process of reducing leakage, contributing to the improvement of economic, social and environmental efficiency and sustainability of urban water supplies. Copyright © 2016 Elsevier B.V. All rights reserved.

Environmental Performance of North American Wood Panel Manufacturing

Treesearch

R. Bergman; D. Kaestner; A. Taylor

2015-01-01

Manufacturing building products such as wood panels has environmental impacts, including contributions to climate change. This paper is a compilation of four studies quantifying these impacts using the life-cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

Multifunctional Agriculture in Policy and Practice? A Comparative Analysis of Norway and Australia

ERIC Educational Resources Information Center

Bjorkhaug, Hilde; Richards, Carol Ann

2008-01-01

Ideals of productivist agriculture in the Western world have faded as the unintended consequences of intensive agriculture and pastoralism have contributed to rural decline and environmental problems. In Norway and Australia, there has been an increasing acceptance of the equal importance of social and environmental sustainability as well as…

76 FR 17487 - Protection of Stratospheric Ozone: New Substitute in the Motor Vehicle Air Conditioning Sector...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... and to disapprove substitutes that present overall risks to human health and the environment more.... Acceptability Decision B. Use Conditions C. Environmental Impacts D. Health and Safety Impacts E. Retrofit Usage...: Protection of Children From Environmental Health and Safety Risks H. Executive Order 13211: Actions That...

Facilitating Comprehension, Connection and Commitment to Environmentally Responsible Design

ERIC Educational Resources Information Center

Boehm, Sarah

2015-01-01

Given the increased awareness of the negative effects the building industry has on the environment, designs produced without considering sustainability of the planet can no longer be accepted. Although the concepts of sustainability and environmental responsibility are not new to the field of interior design, a review of the literature reveals…

78 FR 18665 - Proposed Keystone XL Project; Public Meeting Following Release of the Draft Supplemental Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

... Keystone XL pipeline. The document is a draft technical review of potential environmental impacts. It does... responding to questions or comments at the meeting. Written comments will also be accepted. The date... comments on the Draft Supplemental Environmental Impact Statement in written form. Department of State...

Work-Integrated Learning and Professional Accreditation Policies: An Environmental Health Higher Education Perspective

ERIC Educational Resources Information Center

Dunn, Louise; Nicholson, Rosemary; Ross, Kirstin; Bricknell, Lisa; Davies, Belinda; Hannelly, Toni; Lampard, Jane-Louise; Murray, Zoe; Oosthuizen, Jacques; Roiko, Anne; Wood, James

2018-01-01

The introduction of a new work-integrated learning (WIL) policy for university environmental health education programs seeking professional accreditation identified a number of problems. This included how to evaluate the acceptability of differing approaches to WIL for course accreditation purposes and a need to develop an agreed understanding of…

Establishing an Environmental Scanning System to Augment College and University Planning.

ERIC Educational Resources Information Center

Morrison, James L.

A plan to establish an environmental scanning and forecasting system for colleges and universities is discussed as a way to maximize long-range planning. After proposing a program structure, attention is directed to methods of gaining organizational acceptance, developing a comprehensive taxonomy with an electronic filing system, identifying and…

78 FR 13376 - Draft Environmental Impact Statement for the Cottonwood Cove and Katherine Landing Development...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... Environmental Impact Statement for the Cottonwood Cove and Katherine Landing Development Concept Plans, Clark...) for the Cottonwood Cove and Katherine Landing Development Concept Plans, Lake Mead National Recreation... environment. DATES: The National Park Service will accept comments on the Draft EIS from the public for 60...

76 FR 34763 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses Involving No...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-14

... approved [Nuclear Energy Institute (NEI)] 04-10, Rev. 1 in accordance with the TS SFCP. NEI 04-10, Rev. 1... environmental impact statement or environmental assessment need be prepared for these amendments. If the... by the proposed amendment. The proposed amendment adopts the NRC-accepted guidelines of NEI [Nuclear...

Understanding and applying principles of social cognition and decision making in adaptive environmental governance.

PubMed

DeCaro, Daniel A; Arnol, Craig Anthony Tony; Boama, Emmanuel Frimpong; Garmestani, Ahjond S

2017-03-01

Environmental governance systems are under greater pressure to adapt and to cope with increased social and ecological uncertainty from stressors like climate change. We review principles of social cognition and decision making that shape and constrain how environmental governance systems adapt. We focus primarily on the interplay between key decision makers in society and legal systems. We argue that adaptive governance must overcome three cooperative dilemmas to facilitate adaptation: (1) encouraging collaborative problem solving, (2) garnering social acceptance and commitment, and (3) cultivating a culture of trust and tolerance for change and uncertainty. However, to do so governance systems must cope with biases in people's decision making that cloud their judgment and create conflict. These systems must also satisfy people's fundamental needs for self-determination, fairness, and security, ensuring that changes to environmental governance are perceived as legitimate, trustworthy, and acceptable. We discuss the implications of these principles for common governance solutions (e.g., public participation, enforcement) and conclude with methodological recommendations. We outline how scholars can investigate the social cognitive principles involved in cases of adaptive governance.

Understanding and applying principles of social cognition and decision making in adaptive environmental governance

PubMed Central

DeCaro, Daniel A.; Arnol, Craig Anthony (Tony); Boama, Emmanuel Frimpong; Garmestani, Ahjond S.

2018-01-01

Environmental governance systems are under greater pressure to adapt and to cope with increased social and ecological uncertainty from stressors like climate change. We review principles of social cognition and decision making that shape and constrain how environmental governance systems adapt. We focus primarily on the interplay between key decision makers in society and legal systems. We argue that adaptive governance must overcome three cooperative dilemmas to facilitate adaptation: (1) encouraging collaborative problem solving, (2) garnering social acceptance and commitment, and (3) cultivating a culture of trust and tolerance for change and uncertainty. However, to do so governance systems must cope with biases in people’s decision making that cloud their judgment and create conflict. These systems must also satisfy people’s fundamental needs for self-determination, fairness, and security, ensuring that changes to environmental governance are perceived as legitimate, trustworthy, and acceptable. We discuss the implications of these principles for common governance solutions (e.g., public participation, enforcement) and conclude with methodological recommendations. We outline how scholars can investigate the social cognitive principles involved in cases of adaptive governance. PMID:29780425

On the outdoor annoyance from scooter and motorbike noise in the urban environment.

PubMed

Paviotti, Marco; Vogiatzis, Konstantinos

2012-07-15

The health impacts of environmental noise are a growing concern amongst both the general public and policy-makers in Europe. Environmental noise - especially from road transportation - is widely accepted as an important environmental impact factor that can be taken as a start for the process of evaluating the impact of annoyance on the exposed urban population. Extensive urbanisation and the increase of road transport define the main driving forces for the environmental noise exposure of the population. In urban conditions, it is rather common, regarding road transportation noise, to hear from people that, especially, PTW (Powered Two Wheelers) are annoying, and many times are actually the most annoying environmental noise sources introducing a degradation of the urban environment. In this research, in Athens city centre, both scooters and motorbikes operation patterns are analysed, in the basis of their environmental impact through ad-hoc tests to establish if specific features of their emitted noise are annoying and affect the quality of life. It resulted that PTW are a relevant cause of specific environmental annoyance on pedestrians when low background noise levels and sparse traffic flow allow identifying the PTW. Based on the results of a measurement campaign, both L(max) and roughness indices are identified as characteristic noise signatures of the PTW. Results are compared to laboratory studies on annoyance found in literature and to a specific set of interviews with a large number of pedestrians in selected sites. Annoyance caused by scooters and motorbikes is analysed in the findings and conclusions. Copyright © 2012 Elsevier B.V. All rights reserved.

Investigating the Transport and Fate of Polychlorinated Biphenyls with Stable Chlorine Isotopes

DTIC Science & Technology

2001-09-30

recently accepted in the journal Organic Geochemistry. We published another manuscript in Environmental Science and Pollution Research on the...Chlorine in the Environment a book written by Ruth Stringer and Paul Johnson. This review will soon appear in the journal Environmental Science and...Heraty, L.J., Holt, B.D., Sturchio, N.C., Eglinton, T.I., Drenzek, N.J., Xu, L., Lake, J.L., Maruya, K.A., 2000. Environmental Science and

Acceptance of drinking and driving and alcohol-involved driving crashes in California.

PubMed

MacLeod, Kara E; Karriker-Jaffe, Katherine J; Ragland, David R; Satariano, William A; Kelley-Baker, Tara; Lacey, John H

2015-08-01

Alcohol-impaired driving accounts for substantial proportion of traffic-related fatalities in the U.S. Risk perceptions for drinking and driving have been associated with various measures of drinking and driving behavior. In an effort to understand how to intervene and to better understand how risk perceptions may be shaped, this study explored whether an objective environmental-level measure (proportion of alcohol-involved driving crashes in one's residential city) were related to individual-level perceptions and behavior. Using data from a 2012 cross-sectional roadside survey of 1147 weekend nighttime drivers in California, individual-level self-reported acceptance of drinking and driving and past-year drinking and driving were merged with traffic crash data using respondent ZIP codes. Population average logistic regression modeling was conducted for the odds of acceptance of drinking and driving and self-reported, past-year drinking and driving. A non-linear relationship between city-level alcohol-involved traffic crashes and individual-level acceptance of drinking and driving was found. Acceptance of drinking and driving did not mediate the relationship between the proportion of alcohol-involved traffic crashes and self-reported drinking and driving behavior. However, it was directly related to behavior among those most likely to drink outside the home. The present study surveys a particularly relevant population and is one of few drinking and driving studies to evaluate the relationship between an objective environmental-level crash risk measure and individual-level risk perceptions. In communities with both low and high proportions of alcohol-involved traffic crashes there was low acceptance of drinking and driving. This may mean that in communities with low proportions of crashes, citizens have less permissive norms around drinking and driving, whereas in communities with a high proportion of crashes, the incidence of these crashes may serve as an environmental cue which informs drinking and driving perceptions. Perceptual information on traffic safety can be used to identify places where people may be at greater risk for drinking and driving. Community-level traffic fatalities may be a salient cue for tailoring risk communication. Copyright © 2015 Elsevier Ltd. All rights reserved.

Acceptance of drinking and driving and alcohol-involved driving crashes in California

PubMed Central

Karriker-Jaffe, Katherine J.; Ragland, David R.; Satariano, William A.; Kelley-Baker, Tara; Lacey, John H.

2016-01-01

Background Alcohol-impaired driving accounts for substantial proportion of traffic-related fatalities in the U.S. Risk perceptions for drinking and driving have been associated with various measures of drinking and driving behavior. In an effort to understand how to intervene and to better understand how risk perceptions may be shaped, this study explored whether an objective environmental-level measure (proportion of alcohol-involved driving crashes in one's residential city) were related to individual-level perceptions and behavior. Methods Using data from a 2012 cross-sectional roadside survey of 1,147 weekend nighttime drivers in California, individual-level self-reported acceptance of drinking and driving and past-year drinking and driving were merged with traffic crash data using respondent ZIP codes. Population average logistic regression modeling was conducted for the odds of acceptance of drinking and driving and self-reported, past-year drinking and driving. Results A non-linear relationship between city-level alcohol-involved traffic crashes and individual-level acceptance of drinking and driving was found. Acceptance of drinking and driving did not mediate the relationship between the proportion of alcohol-involved traffic crashes and self-reported drinking and driving behavior. However, it was directly related to behavior among those most likely to drink outside the home. Discussion The present study surveys a particularly relevant population and is one of few drinking and driving studies to evaluate the relationship between an objective environmental-level crash risk measure and individual-level risk perceptions. In communities with both low and high proportions of alcohol-involved traffic crashes there was low acceptance of drinking and driving. This may mean that in communities with low proportions of crashes, citizens have less permissive norms around drinking and driving, whereas in communities with a high proportion of crashes, the incidence of these crashes may serve as an environmental cue which informs drinking and driving perceptions. Perceptual information on traffic safety can be used to identify places where people may be at greater risk for drinking and driving. Community-level traffic fatalities may be a salient cue for tailoring risk communication. PMID:25980918

Multi-discipline Waste Acceptance Process at the Nevada National Security Site - 13573

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carilli, Jhon T.; Krenzien, Susan K.

2013-07-01

The Nevada National Security Site low-level radioactive waste disposal facility acceptance process requires multiple disciplines to ensure the protection of workers, the public, and the environment. These disciplines, which include waste acceptance, nuclear criticality, safety, permitting, operations, and performance assessment, combine into the overall waste acceptance process to assess low-level radioactive waste streams for disposal at the Area 5 Radioactive Waste Management Site. Four waste streams recently highlighted the integration of these disciplines: the Oak Ridge Radioisotope Thermoelectric Generators and Consolidated Edison Uranium Solidification Project material, West Valley Melter, and classified waste. (authors)

Harmonization of good laboratory practice requirements and laboratory accreditation programs.

PubMed

Royal, P D

1994-09-01

Efforts to harmonize Good Laboratory Practice (GLP) requirements have been underway through the Organization for Economic Cooperation and Development (OECD) since 1981. In 1985, a GLP panel was established to facilitate the practical implementation of the OECD/GLP program. Through the OECD/GLP program, Memoranda of Understanding (MOU) agreements which foster requirements for reciprocal data and study acceptance and unified GLP standards have been developed among member countries. Three OECD Consensus Workshops and three inspectors training workshops have been held. In concert with these efforts, several OECD countries have developed GLP accreditation programs, managed by local health and environmental ministries. In addition, Canada and the United States are investigating Laboratory Accreditation programs for environmental monitoring assessment and GLP-regulated studies. In the European Community (EC), the need for quality standards specifying requirements for production and international trade has promoted International Standards Organization (ISO) certification for certain products. ISO-9000 standards identify requirements for certification of quality systems. These certification programs may affect the trade and market of laboratories conducting GLP studies. Two goals identified by these efforts are common to both programs: first, harmonization and recognition of requirements, and second, confidence in the rigor of program components used to assess the integrity of data produced and study activities. This confidence can be promoted, in part, through laboratory inspection and screening processes. However, the question remains, will data produced by sanctioned laboratories be mutually accepted on an international basis?(ABSTRACT TRUNCATED AT 250 WORDS)

A new process for converting SO2 to sulfur without generating secondary pollutants through reactions involving CaS and CaSO4.

PubMed

Sohn, H Y; Kim, Byung-Su

2002-07-01

Nonferrous smelters and coal gasification processes generate environmentally harmful sulfur dioxide streams, most of which are treated to produce sulfuric acid with the accompanying problems of market shortage and transportation difficulties. Some sulfur dioxide streams are scrubbed with an alkali solution or a solid substance such as limestone or dolomite, which in turn generates wastes that pose other pollution problems. While the conversion of sulfur dioxide to elemental sulfur has many environmental advantages, no processes exist that are environmentally acceptable and economically viable. A new method for converting sulfur dioxide to elemental sulfur by a cyclic process involving calcium sulfide and calcium sulfate without generating solid wastes has been developed. In this process, calcium sulfate pellets as the starting raw material are reduced by a suitable reducing agent such as hydrogen to produce calcium sulfide pellets, which are used to reduce sulfur dioxide producing elemental sulfur vapor and calcium sulfate. The latter is then reduced to regenerate calcium sulfide. Thermodynamic analysis and experimental results indicated that the CaS-SO2 reaction produces mainly sulfur vapor and solid calcium sulfate and that the gaseous product from the CaSO4-H2 reaction is mainly water vapor. The rates of the two reactions are reasonably rapid in the temperature range 1000-1100 K, and, importantly, the physical strengths and reactivities of the pellets are maintained largely unchanged up to the tenth cycle, the last cycle tested in this work. Sulfur dioxide-containing streams from certain sources, such as the regenerator off-gas from an integrated gasification combined cycle desulfurization unit and new sulfide smelting plants, contain much higher partial pressures of SO2. In these cases, the rate of the first reaction is expected to be proportionally higher than in the test conditions reported in this paper.

Energy-efficient approach to minimizing the energy consumption in an extended job-shop scheduling problem

NASA Astrophysics Data System (ADS)

Tang, Dunbing; Dai, Min

2015-09-01

The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production planning and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed smalland large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

Exhaust Nozzle Materials Development for the High Speed Civil Transport

NASA Technical Reports Server (NTRS)

Grady, J. E.

1999-01-01

The United States has embarked on a national effort to develop the technology necessary to produce a Mach 2.4 High Speed Civil Transport (HSCT) for entry into service by the year 2005. The viability of this aircraft is contingent upon its meeting both economic and environmental requirements. Two engine components have been identified as critical to the environmental acceptability of the HSCT. These include a combustor with significantly lower emissions than are feasible with current technology, and a lightweight exhaust nozzle that meets community noise standards. The Enabling Propulsion Materials (EPM) program will develop the advanced structural materials, materials fabrication processes, structural analysis and life prediction tools for the HSCT combustor and low noise exhaust nozzle. This is being accomplished through the coordinated efforts of the NASA Lewis Research Center, General Electric Aircraft Engines and Pratt & Whitney. The mission of the EPM Exhaust Nozzle Team is to develop and demonstrate this technology by the year 1999 to enable its timely incorporation into HSCT propulsion systems.

Prototype Aerogel Insulation for Melamine-Foam Substitute: Critical Space Station Express Rack Technology

NASA Technical Reports Server (NTRS)

Noever, David A.; Sibille, Laurent; Smith, David; Cronise, Raymond

1998-01-01

There is a current lack of environmentally acceptable foams to insulate Long-Duration Human Spaceflight Missions, including the experimental Express Rack for the Space Station. A recent 60-day manned test in a sealed chamber at Johnson Space Center (JSC) was nearly aborted, because of persistently high formaldehyde concentrations in the chamber. Subsequent investigation showed that the source was melamine foam (used extensively for acoustic insulation). The thermal and acoustic potential for melamine-foam substitutes is evaluated for scale-up to a silica-based foam and aerogel, which is environmentally benign for long duration space flight. These features will be discussed in reference to an aerogel prototype to: 1) assemble material strength data for various formulated aerogels, both silica and organic carbon aerogels; 2) assemble the aerogel into panels of mylar/vacuum-encapsulated rigid boards which can be molded in various shapes and rigidities; and 3) describe a process for space applications for formaldehyde-free, long duration thermal and acoustic insulators.

Racial and Ethnic Cultural Factors in the Process of Acceptance of Mental Illness

ERIC Educational Resources Information Center

Mizock, Lauren; Russinova, Zlatka

2013-01-01

Acceptance of mental illness is essential to promoting recovery and is uniquely impacted by issues of culture, race, and ethnicity. Qualitative case narrative methodology was used to identify themes related to the cultural facilitators and barriers in the acceptance process. Five participant narratives are presented to assist practitioners in…

Science in the public process of ecosystem management: lessons from Hawaii, Southeast Asia, Africa and the US Mainland.

PubMed

Gutrich, John; Donovan, Deanna; Finucane, Melissa; Focht, Will; Hitzhusen, Fred; Manopimoke, Supachit; McCauley, David; Norton, Bryan; Sabatier, Paul; Salzman, Jim; Sasmitawidjaja, Virza

2005-08-01

Partnerships and co-operative environmental management are increasing worldwide as is the call for scientific input in the public process of ecosystem management. In Hawaii, private landowners, non-governmental organizations, and state and federal agencies have formed watershed partnerships to conserve and better manage upland forested watersheds. In this paper, findings of an international workshop convened in Hawaii to explore the strengths of approaches used to assess stakeholder values of environmental resources and foster consensus in the public process of ecosystem management are presented. Authors draw upon field experience in projects throughout Hawaii, Southeast Asia, Africa and the US mainland to derive a set of lessons learned that can be applied to Hawaiian and other watershed partnerships in an effort to promote consensus and sustainable ecosystem management. Interdisciplinary science-based models can serve as effective tools to identify areas of potential consensus in the process of ecosystem management. Effective integration of scientific input in co-operative ecosystem management depends on the role of science, the stakeholders and decision-makers involved, and the common language utilized to compare tradeoffs. Trust is essential to consensus building and the integration of scientific input must be transparent and inclusive of public feedback. Consideration of all relevant stakeholders and the actual benefits and costs of management activities to each stakeholder is essential. Perceptions and intuitive responses of people can be as influential as analytical processes in decision-making and must be addressed. Deliberative, dynamic and iterative decision-making processes all influence the level of stakeholder achievement of consensus. In Hawaii, application of lessons learned can promote more informed and democratic decision processes, quality scientific analysis that is relevant, and legitimacy and public acceptance of ecosystem management.

Effect of redox conditions on MTBE biodegradation in surface water Sediments

USGS Publications Warehouse

Bradley, P.M.; Chapelle, F.H.; Landmeyer, J.E.

2001-01-01

Microbial degradation of methyl tert-butyl ether (MTBE) was observed in surface water-sediment microcosms under anaerobic conditions. The efficiency and products of anaerobic MTBE biodegradation were dependent on the predominant terminal electron-accepting conditions. In the presence of substantial methanogenic activity, MTBE biodegradation was nominal and involved reduction of MTBE to the toxic product, tert-butyl alcohol (TBA). In the absence of significant methanogenic activity, accumulation of [14C]TBA generally decreased, and mineralization of [U-14C]MTBE to 14CO2 generally increased as the oxidative potential of the predominant terminal electron acceptor increased in the order of SO4, Fe(III), Mn(IV) < NO3 < O2. Microbial mineralization of MTBE to CO2 under Mn(IV)or SO4-reducing conditions has not been reported previously. The results of this study indicate that microorganisms inhabiting the sediments of streams and lakes can degrade MTBE effectively under a range of anaerobic terminal electron-accepting conditions. Thus, anaerobic bed sediment microbial processes may provide a significant environmental sink for MTBE in surface water systems throughout the United States.

IEC 61511 and the capital project process--a protective management system approach.

PubMed

Summers, Angela E

2006-03-17

This year, the process industry has reached an important milestone in process safety-the acceptance of an internationally recognized standard for safety instrumented systems (SIS). This standard, IEC 61511, documents good engineering practice for the assessment, design, operation, maintenance, and management of SISs. The foundation of the standard is established by several requirements in Part 1, Clauses 5-7, which cover the development of a management system aimed at ensuring that functional safety is achieved. The management system includes a quality assurance process for the entire SIS lifecycle, requiring the development of procedures, identification of resources and acquisition of tools. For maximum benefit, the deliverables and quality control checks required by the standard should be integrated into the capital project process, addressing safety, environmental, plant productivity, and asset protection. Industry has become inundated with a multitude of programs focusing on safety, quality, and cost performance. This paper introduces a protective management system, which builds upon the work process identified in IEC 61511. Typical capital project phases are integrated with the management system to yield one comprehensive program to efficiently manage process risk. Finally, the paper highlights areas where internal practices or guidelines should be developed to improve program performance and cost effectiveness.

Health Effects of Environmental Pollution.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC.

This booklet notes that for a long time the American people were willing to pay any price for progress. Now may refuse to accept an environment that menaces their health and lowers their enjoyment of life. They are embracing a new environmental consciousness, a broader vision of reality, a more profound sense of their place in nature. Among the…

10 CFR 51.108 - Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria...

Code of Federal Regulations, 2013 CFR

2013-01-01

... CFR 52.103(b), the Commission will not admit any contentions on environmental issues, the adequacy of the environmental impact statement for the combined license issued under subpart C of part 52, or the... finding under 10 CFR 52.103(g). [72 FR 49517, Aug. 28, 2007] materials licenses ...

10 CFR 51.108 - Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria...

Code of Federal Regulations, 2011 CFR

2011-01-01

... CFR 52.103(b), the Commission will not admit any contentions on environmental issues, the adequacy of the environmental impact statement for the combined license issued under subpart C of part 52, or the... finding under 10 CFR 52.103(g). [72 FR 49517, Aug. 28, 2007] materials licenses ...

10 CFR 51.108 - Public hearings on Commission findings that inspections, tests, analyses, and acceptance criteria...

Code of Federal Regulations, 2014 CFR

2014-01-01

... CFR 52.103(b), the Commission will not admit any contentions on environmental issues, the adequacy of the environmental impact statement for the combined license issued under subpart C of part 52, or the... finding under 10 CFR 52.103(g). [72 FR 49517, Aug. 28, 2007] materials licenses ...

76 FR 64893 - Notice of Availability of Draft Environmental Impact Statement, Rosemont Copper Project on the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... 90-day public comment period, which begins with the Environmental Protection Agency's publication of... contact information, will be accepted and considered; however, anonymous comments will not provide the... Elementary School, 23 Elgin Road, Elgin, AZ 85611 (tentative). 3. November 12, 2011, 1 p.m. to 5 p.m., Palo...

Production and cost of a live skyline cable yarder tested in Appalachia

Treesearch

Edward L. Fisher; Harry G. Gibson; Cleveland J. Biller

1980-01-01

Logging systems that are profitable and environmentally acceptable are needed in Appalachian hardwood forests. Small, mobile cable yarders show promise in meeting both economic and environmental objectives. One such yarder, the Ecologger, was tested on the Jefferson National Forest near Marion, Virginia. Production rates and costs are presented for the system along...

News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers

NASA Astrophysics Data System (ADS)

Anton, J. M.; Sanchez, M. E.; Grau, J. B.; Andina, D.

2012-04-01

The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, "project of end of career", Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.

Use and acceptance of long lasting insecticidal net screens for dengue prevention in Acapulco, Guerrero, Mexico.

PubMed

Jones, Catrin H; Benítez-Valladares, David; Guillermo-May, Guillermo; Dzul-Manzanilla, Felipe; Che-Mendoza, Azael; Barrera-Pérez, Mario; Selem-Salas, Celia; Chablé-Santos, Juan; Sommerfeld, Johannes; Kroeger, Axel; O'Dempsey, Timothy; Medina-Barreiro, Anuar; Manrique-Saide, Pablo

2014-08-14

Dengue, recognized by the WHO as the most important mosquito-borne viral disease in the world, is a growing problem. Currently, the only effective way of preventing dengue is vector control. Standard methods have shown limited effect, and there have been calls to develop new integrated vector management approaches. One novel tool, protecting houses with long lasting insecticidal screens on doors and windows, is being trialled in a cluster randomised controlled trial by a joint UADY/WHO TDR/IDRC study in various districts of Acapulco, Mexico, with exceptionally high levels of crime and insecurity.This study investigated the community's perspectives of long lasting insecticidal screens on doors and windows in homes and in schools, in order to ascertain their acceptability, to identify challenges to further implementation and opportunities for future improvements. This was a sequential mixed-methods study. The quantitative arm contained a satisfaction survey administered to 288 houses that had received the intervention examining their perspectives of both the intervention and dengue prevention in general. The qualitative arm consisted of Focus Group Discussions (FGDs) with those who had accepted the intervention and key informant interviews with: schoolteachers to discuss the use of the screens in schools, program staff, and community members who had refused the intervention. Overall satisfaction and acceptance of the screens was very high, with only some operational and technical complaints relating to screen fragility and the installation process. However, the wider social context of urban violence and insecurity was a major barrier to screen acceptance. Lack of information dissemination and community collaboration were identified as project weaknesses. The screens are widely accepted by the population, but the project implementation could be improved by reassuring the community of its legitimacy in the context of insecurity. More community engagement and better information sharing structures are needed.The screens could be a major new dengue prevention tool suitable for widespread use, if further research supports their entomological and epidemiological effectiveness and their acceptability in different social and environmental contexts. Further research is needed looking at the impact of insecurity of dengue prevention programmes.

Environmental, technical and technological aspects of hazardous waste management in Poland

NASA Astrophysics Data System (ADS)

Pyssa, Justyna

2017-10-01

The issue of recovery and disposal of hazardous waste is not a new concern. The waste comes from various processes and technologies and therefore the bigger emphasis should be placed on reducing quantities of generated hazardous waste (which is often connected with changes in the technology of manufacturing a given product) and limitation of their negative influence on natural environment. Plants specializing in waste processing processes should meet the so-called cardinal triad of conditions deciding on the full success of investment, and namely: economic effectiveness, ecological efficiency and social acceptance. The structure of generation of hazardous waste in EU-28 has been presented in the paper. Methods of hazardous waste disposal in Poland have been discussed. Economic and ecological criteria for the selection of technology of hazardous waste disposal have been analyzed. The influence of the hazardous waste on the environment is also presented. For four groups of waste, which are currently stored, alternative methods of disposal have been proposed.

Processes to remove acid forming gases from exhaust gases

DOEpatents

Chang, Shih-Ger

1994-01-01

The present invention relates to a process for reducing the concentration of NO in a gas, which process comprises: (A) contacting a gas sample containing NO with a gaseous oxidizing agent to oxidize the NO to NO.sub.2 ; (B) contacting the gas sample of step (A) comprising NO.sub.2 with an aqueous reagent of bisulfite/sulfite and a compound selected from urea, sulfamic acid, hydrazinium ion, hydrazoic acid, nitroaniline, sulfanilamide, sulfanilic acid, mercaptopropanoic acid, mercaptosuccinic acid, cysteine or combinations thereof at between about 0.degree. and 100.degree. C. at a pH of between about 1 and 7 for between about 0.01 and 60 sec; and (C) optionally contacting the reaction product of step (A) with conventional chemical reagents to reduce the concentrations of the organic products of the reaction in step (B) to environ-mentally acceptable levels. Urea or sulfamic acid are preferred, especially sulfamic acid, and step (C) is not necessary or performed.

Wax removal for accelerated cotton scouring with alkaline pectinase.

PubMed

Agrawal, Pramod B; Nierstrasz, Vincent A; Klug-Santner, Barbara G; Gübitz, Georg M; Lenting, Herman B M; Warmoeskerken, Marijn M C G

2007-03-01

A rational approach has been applied to design a new environmentally acceptable and industrially viable enzymatic scouring process. Owing to the substrate specificity, the selection of enzymes depends on the structure and composition of the substrate, i.e. cotton fibre. The structure and composition of the outer layers of cotton fibre has been established on the basis of thorough literature study, which identifies wax and pectin removal to be the key steps for successful scouring process. Three main issues are discussed here, i.e. benchmarking of the existing alkaline scouring process, an evaluation of several selected acidic and alkaline pectinases for scouring, and the effect of wax removal treatment on pectinase performance. It has been found that the pectinolytic capability of alkaline pectinases on cotton pectin is nearly 75% higher than that of acidic pectinases. It is concluded that an efficient wax removal prior to pectinase treatment indeed results in improved performance in terms of hydrophilicity and pectin removal. To evaluate the hydrophilicity, the structural contact angle (theta) was measured using an auto-porosimeter.

Fair fund distribution for a municipal incinerator using GIS-based fuzzy analytic hierarchy process.

PubMed

Chang, Ni-Bin; Chang, Ying-Hsi; Chen, Ho-Wen

2009-01-01

Burning municipal solid waste (MSW) can generate energy and reduce the waste volume, which delivers benefits to society through resources conservation. But current practices by society are not sustainable because the associated environmental impacts of waste incineration on urbanized regions have been a long-standing concern in local communities. Public reluctance with regard to accepting the incinerators as typical utilities often results in an intensive debate concerning how much welfare is lost for those residents living in the vicinity of those incinerators. As the measure of welfare change with respect to environmental quality constraints nearby these incinerators remains critical, new arguments related to how to allocate the fair fund among affected communities became a focal point in environmental management. Given the fact that most County fair fund rules allow a great deal of flexibility for redistribution, little is known about what type of methodology may be a good fit to determine the distribution of such a fair fund under uncertainty. This paper purports to demonstrate a system-based approach that helps any fair fund distribution, which is made with respect to residents' possible claim for fair damages due to the installation of a new incinerator. Holding a case study using integrated geographic information system (GIS) and fuzzy analytic hierarchy process (FAHP) for finding out the most appropriate distribution strategy between two neighboring towns in Taipei County, Taiwan demonstrates the application potential. Participants in determining the use of a fair fund also follow a highly democratic procedure where all stakeholders involved eventually express a high level of satisfaction with the results facilitating the final decision making process. It ensures that plans for the distribution of such a fair fund were carefully thought out and justified with a multi-faceted nature that covers political, socio-economic, technical, environmental, public health, and industrial aspects.

Live What You Teach & Teach What You Live: Student Views on the Acceptability of Teachers' Value-Related Statements about Sustainability and Climate Change

ERIC Educational Resources Information Center

Torkar, Gregor

2013-01-01

This paper presents the results of a survey among pre-service and in-service students of pre-school education and students of environmental sciences on the acceptability of value-laden statements made by their teachers on issues of sustainable development and climate change. Fifteen statements were provided, and students had to choose among the…

The stakeholder preference for best management practices in the Three Gorges Reservoir Region.

PubMed

Qiu, Jiali; Shen, Zhenyao; Chen, Lei; Xie, Hui; Sun, Chengchun; Huang, Qin

2014-11-01

A qualitative analysis of in-depth interviews with 92 farmers and 42 policy managers in Wuxi County, the Three Gorges Reservoir Region, was conducted to identify stakeholder preferences for alternative best management practices (BMPs) and to determine the factors that affect their acceptance. Policy manager support for most of the practices was relatively stronger than support by farmers, except for the grade stabilization structure (GSS), hillside ditch (HD) and constructed wetland alternative, owing to their perceptions of soil benefits, economic advantages and environmental advantages. Farmers opposed those practices that occupied cultivated lands or changed the conventional planting methods, such as field border, conservation tillage (CT) and contour buffer strips. They tended to accept the BMPs with off-farm pollution reduction, such as GSS, riparian forest buffer and HD, and the BMPs associated with soil benefits, such as nutrient management and Terrace. The result that almost all respondents did not accept CT differed from reports in the existing literature. There is a significant correlation between the acceptance of some BMPs and the townships where the farmers lived (P ≤ 0.05). The environmental conditions and social factors would affect farmer support for BMPs, including local soil conditions, farming methods, economic income, education level and age. The economic advantages of the BMPs were the main motivation for farmers to accept the practices. Furthermore, intensive education efforts, financial incentives or economic subsidies may promote the adoption of the BMPs in our study area.

The Stakeholder Preference for Best Management Practices in the Three Gorges Reservoir Region

NASA Astrophysics Data System (ADS)

Qiu, Jiali; Shen, Zhenyao; Chen, Lei; Xie, Hui; Sun, Chengchun; Huang, Qin

2014-11-01

A qualitative analysis of in-depth interviews with 92 farmers and 42 policy managers in Wuxi County, the Three Gorges Reservoir Region, was conducted to identify stakeholder preferences for alternative best management practices (BMPs) and to determine the factors that affect their acceptance. Policy manager support for most of the practices was relatively stronger than support by farmers, except for the grade stabilization structure (GSS), hillside ditch (HD) and constructed wetland alternative, owing to their perceptions of soil benefits, economic advantages and environmental advantages. Farmers opposed those practices that occupied cultivated lands or changed the conventional planting methods, such as field border, conservation tillage (CT) and contour buffer strips. They tended to accept the BMPs with off-farm pollution reduction, such as GSS, riparian forest buffer and HD, and the BMPs associated with soil benefits, such as nutrient management and Terrace. The result that almost all respondents did not accept CT differed from reports in the existing literature. There is a significant correlation between the acceptance of some BMPs and the townships where the farmers lived ( P ≤ 0.05). The environmental conditions and social factors would affect farmer support for BMPs, including local soil conditions, farming methods, economic income, education level and age. The economic advantages of the BMPs were the main motivation for farmers to accept the practices. Furthermore, intensive education efforts, financial incentives or economic subsidies may promote the adoption of the BMPs in our study area.

Some considerations on the attractiveness of participatory processes for researchers from natural science

NASA Astrophysics Data System (ADS)

Barthel, Roland

2013-04-01

Participatory modeling and participatory scenario development have become an essential part of environmental impact assessment and planning in the field of water resources management. But even if most people agree that participation is required to solve environmental problems in a way that satisfies both the environmental and societal needs, success stories are relatively rare, while many attempts to include stakeholders in the development of models are still reported to have failed. This paper proposes the hypothesis, that the lack of success in participatory modeling can partly be attributed to a lack of attractiveness of participatory approaches for researchers from natural sciences (subsequently called 'modelers'). It has to be pointed out that this discussion is mainly concerned with natural scientists in academia and not with modelers who develop models for commercial purposes or modelers employed by public agencies. The involvement of modelers and stakeholders in participatory modeling has been intensively studied during recent years. However, such analysis is rarely made from the viewpoint of the modelers themselves. Modelers usually don't see participatory modeling and scenario development as scientific targets as such, because the theoretical foundations of such processes usually lie far outside their own area of expertise. Thus, participatory processes are seen mainly as a means to attract funding or to facilitate the access to data or (relatively rarely) as a way to develop a research model into a commercial product. The majority of modelers very likely do not spend too much time on reflecting whether or not their new tools are helpful to solve real world problems or if the results are understandable and acceptable for stakeholders. They consider their task completed when the model they developed satisfies the 'scientific requirements', which are essentially different from the requirements to satisfy a group of stakeholders. Funding often stops before a newly developed model can actually be tested in a stakeholder process. Therefore the gap between stakeholders and modelers persists or is even growing. A main reason for this probably lies in the way that the work of scientists (modelers) is evaluated. What counts is the number of journal articles produced, while applicability or societal impact is still not a measure of scientific success. A good journal article on a model requires an exemplary validation but only very rarely would a reviewer ask if a model was accepted by stakeholders. So why should a scientist go through a tedious stakeholder process? The stakeholder process might be a requirement of the research grant, but whether this is taken seriously, can be questioned, as long as stakeholder dialogues do not lead to quantifiable scientific success. In particular for researchers in early career stages who undergo typical, publication-based evaluation processes, participatory research is hardly beneficial. The discussion in this contribution is based on three pillars: (i) a comprehensive evaluation of the literature published on participatory modeling and scenario development, (ii) a case study involving the development of an integrated model for water and land use management including an intensive stakeholder process and (iii) unstructured, personal communication - with mainly young scientists - about the attractiveness of multidisciplinary, applied research.

Assessment of the environmental fate and effects of azilsartan, a selective antagonist of angiotensin II type 1.

PubMed

Weltman, R; Brands, C M J; Corral, E; Desmares-Koopmans, M J E; Migchielsen, M H J; Oudhoff, K A; de Roode, D F

2012-06-01

In this paper the results of a thorough evaluation of the environmental fate and effects of azilsartan are presented. Azilsartan medoxomil is administered as a pro-drug for the treatment of patients with essential hypertension. The pro-drug is converted by hydrolysis to the active pharmaceutical ingredient azilsartan. Laboratory tests to evaluate the environmental fate and effects of azilsartan medoxomil were conducted with azilsartan and performed in accordance with OECD test guidelines. The predicted environmental concentration (PEC) in surface water was estimated at 0.32 μg L(-1) (above the action limit of 0.01 μg L(-1)), triggering a Phase II assessment. Azilsartan is not readily biodegradable. Results of the water sediment study demonstrated significant shifting of azilsartan metabolites to sediment. Based on the equilibrium partitioning method, metabolites are unlikely to pose a risk to sediment-dwelling organisms. Ratios of the predicted environmental concentrations (PECs) to the predicted-no-effect concentrations (PNECs) did not exceed the relevant triggers, and the risk to aquatic, sewage treatment plant (STP), groundwater and sediment compartments was concluded acceptable. A terrestrial assessment was not triggered. Azilsartan poses an acceptable risk to the environment. Copyright © 2012 Elsevier Ltd. All rights reserved.

An environmental, economic, and social assessment of improving cattle finishing weight or average daily gain within U.S. beef production.

PubMed

White, R R; Capper, J L

2013-12-01

The objective of this study was to assess environmental impact, economic viability, and social acceptability of 3 beef production systems with differing levels of efficiency. A deterministic model of U.S. beef production was used to predict the number of animals required to produce 1 × 10(9) kg HCW beef. Three production treatments were compared, 1 representing average U.S. production (control), 1 with a 15% increase in ADG, and 1 with a 15% increase in finishing weight (FW). For each treatment, various socioeconomic scenarios were compared to account for uncertainty in producer and consumer behavior. Environmental impact metrics included feed consumption, land use, water use, greenhouse gas emissions (GHGe), and N and P excretion. Feed cost, animal purchase cost, animal sales revenue, and income over costs (IOVC) were used as metrics of economic viability. Willingness to pay (WTP) was used to identify improvements or reductions in social acceptability. When ADG improved, feedstuff consumption, land use, and water use decreased by 6.4%, 3.2%, and 12.3%, respectively, compared with the control. Carbon footprint decreased 11.7% and N and P excretion were reduced by 4% and 13.8%, respectively. When FW improved, decreases were seen in feedstuff consumption (12.1%), water use (9.2%). and land use (15.5%); total GHGe decreased 14.7%; and N and P excretion decreased by 10.1% and 17.2%, compared with the control. Changes in IOVC were dependent on socioeconomic scenario. When the ADG scenario was compared with the control, changes in sector profitability ranged from 51 to 117% (cow-calf), -38 to 157% (stocker), and 37 to 134% (feedlot). When improved FW was compared, changes in cow-calf profit ranged from 67% to 143%, stocker profit ranged from -41% to 155% and feedlot profit ranged from 37% to 136%. When WTP was based on marketing beef being more efficiently produced, WTP improved by 10%; thus, social acceptability increased. When marketing was based on production efficiency and consumer knowledge of growth-enhancing technology use, WTP decreased by 12%-leading to a decrease in social acceptability. Results demonstrated that improved efficiency also improved environmental impact, but impacts on economic viability and social acceptability are highly dependent on consumer and producer behavioral responses to efficiency improvements.

The ecological limits of hydrologic alteration (ELOHA): A new framework for developing regional environmental flow standards

USGS Publications Warehouse

Poff, N.L.; Richter, B.D.; Arthington, A.H.; Bunn, S.E.; Naiman, R.J.; Kendy, E.; Acreman, M.; Apse, C.; Bledsoe, B.P.; Freeman, Mary C.; Henriksen, J.; Jacobson, R.B.; Kennen, J.G.; Merritt, D.M.; O'Keeffe, J. H.; Olden, J.D.; Rogers, K.; Tharme, R.E.; Warner, A.

2010-01-01

The flow regime is a primary determinant of the structure and function of aquatic and riparian ecosystems for streams and rivers. Hydrologic alteration has impaired riverine ecosystems on a global scale, and the pace and intensity of human development greatly exceeds the ability of scientists to assess the effects on a river-by-river basis. Current scientific understanding of hydrologic controls on riverine ecosystems and experience gained from individual river studies support development of environmental flow standards at the regional scale. 2. This paper presents a consensus view from a group of international scientists on a new framework for assessing environmental flow needs for many streams and rivers simultaneously to foster development and implementation of environmental flow standards at the regional scale. This framework, the ecological limits of hydrologic alteration (ELOHA), is a synthesis of a number of existing hydrologic techniques and environmental flow methods that are currently being used to various degrees and that can support comprehensive regional flow management. The flexible approach allows scientists, water-resource managers and stakeholders to analyse and synthesise available scientific information into ecologically based and socially acceptable goals and standards for management of environmental flows. 3. The ELOHA framework includes the synthesis of existing hydrologic and ecological databases from many rivers within a user-defined region to develop scientifically defensible and empirically testable relationships between flow alteration and ecological responses. These relationships serve as the basis for the societally driven process of developing regional flow standards. This is to be achieved by first using hydrologic modelling to build a 'hydrologic foundation' of baseline and current hydrographs for stream and river segments throughout the region. Second, using a set of ecologically relevant flow variables, river segments within the region are classified into a few distinctive flow regime types that are expected to have different ecological characteristics. These river types can be further subclassified according to important geomorphic features that define hydraulic habitat features. Third, the deviation of current-condition flows from baseline-condition flow is determined. Fourth, flow alteration-ecological response relationships are developed for each river type, based on a combination of existing hydroecological literature, expert knowledge and field studies across gradients of hydrologic alteration. 4. Scientific uncertainty will exist in the flow alteration-ecological response relationships, in part because of the confounding of hydrologic alteration with other important environmental determinants of river ecosystem condition (e.g. temperature). Application of the ELOHA framework should therefore occur in a consensus context where stakeholders and decision-makers explicitly evaluate acceptable risk as a balance between the perceived value of the ecological goals, the economic costs involved and the scientific uncertainties in functional relationships between ecological responses and flow alteration. 5. The ELOHA framework also should proceed in an adaptive management context, where collection of monitoring data or targeted field sampling data allows for testing of the proposed flow alteration-ecological response relationships. This empirical validation process allows for a fine-tuning of environmental flow management targets. The ELOHA framework can be used both to guide basic research in hydroecology and to further implementation of more comprehensive environmental flow management of freshwater sustainability on a global scale. ?? 2009 Blackwell Publishing Ltd.

The Rapid Integration and Test Environment: A Process for Achieving Software Test Acceptance

DTIC Science & Technology

2010-05-01

Test Environment : A Process for Achieving Software Test Acceptance 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...mlif`v= 365= k^s^i=mlpqdo^ar^qb=p`elli= The Rapid Integration and Test Environment : A Process for Achieving Software Test Acceptance Patrick V...was awarded the Bronze Star. Introduction The Rapid Integration and Test Environment (RITE) initiative, implemented by the Program Executive Office

Energy-saving analysis of hydraulic hybrid excavator based on common pressure rail.

PubMed

Shen, Wei; Jiang, Jihai; Su, Xiaoyu; Karimi, Hamid Reza

2013-01-01

Energy-saving research of excavators is becoming one hot topic due to the increasing energy crisis and environmental deterioration recently. Hydraulic hybrid excavator based on common pressure rail (HHEC) provides an alternative with electric hybrid excavator because it has high power density and environment friendly and easy to modify based on the existing manufacture process. This paper is focused on the fuel consumption of HHEC and the actuator dynamic response to assure that the new system can save energy without sacrificing performance. Firstly, we introduce the basic principle of HHEC; then, the sizing process is presented; furthermore, the modeling period which combined mathematical analysis and experiment identification is listed. Finally, simulation results show that HHEC has a fast dynamic response which can be accepted in engineering and the fuel consumption can be reduced 21% to compare the original LS excavator and even 32% after adopting another smaller engine.

Energy-Saving Analysis of Hydraulic Hybrid Excavator Based on Common Pressure Rail

PubMed Central

Jiang, Jihai; Su, Xiaoyu

2013-01-01

Energy-saving research of excavators is becoming one hot topic due to the increasing energy crisis and environmental deterioration recently. Hydraulic hybrid excavator based on common pressure rail (HHEC) provides an alternative with electric hybrid excavator because it has high power density and environment friendly and easy to modify based on the existing manufacture process. This paper is focused on the fuel consumption of HHEC and the actuator dynamic response to assure that the new system can save energy without sacrificing performance. Firstly, we introduce the basic principle of HHEC; then, the sizing process is presented; furthermore, the modeling period which combined mathematical analysis and experiment identification is listed. Finally, simulation results show that HHEC has a fast dynamic response which can be accepted in engineering and the fuel consumption can be reduced 21% to compare the original LS excavator and even 32% after adopting another smaller engine. PMID:24194683

[Dry view laser imager--a new economical photothermal imaging method].

PubMed

Weberling, R

1996-11-01

The production of hard copies is currently achieved by means of laser imagers and wet film processing in systems attached either directly in or to the laser imager or in a darkroom. Variations in image quality resulting from a not always optimal wet film development are frequent. A newly developed thermographic film developer for laser films without liquid powdered chemicals, on the other hand, is environmentally preferable and reducing operating costs. The completely dry developing process provides permanent image documentation meeting the quality and safety requirements of RöV and BAK. One of the currently available systems of this type, the DryView Laser Imager is inexpensive and easy to install. The selective connection principle of the DryView Laser Imager can be expanded as required and accepts digital and/or analog interfaces with all imaging systems (CT, MR, DR, US, NM) from the various manufactures.

Nanomaterials and Water Purification: Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Savage, Nora; Diallo, Mamadou S.

2005-10-01

Advances in nanoscale science and engineering suggest that many of the current problems involving water quality could be resolved or greatly ameliorated using nanosorbents, nanocatalysts, bioactive nanoparticles, nanostructured catalytic membranes and nanoparticle enhanced filtration among other products and processes resulting from the development of nanotechnology. Innovations in the development of novel technologies to desalinate water are among the most exciting and promising. Additionally, nanotechnology-derived products that reduce the concentrations of toxic compounds to sub-ppb levels can assist in the attainment of water quality standards and health advisories. This article gives an overview of the use of nanomaterials in water purification. We highlight recent advances on the development of novel nanoscale materials and processes for treatment of surface water, groundwater and industrial wastewater contaminated by toxic metal ions, radionuclides, organic and inorganic solutes, bacteria and viruses. In addition, we discuss some challenges associated with the development of cost effective and environmentally acceptable functional nanomaterials for water purification.

EUV lithography using water-developable resist material derived from biomass

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Oshima, Akihiro; Oyama, Tomoko G.; Ichikawa, Takumi; Sekiguchi, Atsushi; Kashiwakura, Miki; Kozawa, Takahiro; Tagawa, Seiichi

2013-03-01

A water-developable resist material which had specific desired properties such as high sensitivity of 5.0 μC/cm2, thermal stability of 160 °C, suitable calculated linear absorption coefficients of 13.5 nm, and acceptable CF4 etch selectivity was proposed using EB lithography for EUV lithography. A water developable resist material derived from biomass is expected for non-petroleum resources, environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of trimethylphenylammonium hydroxide. 100 nm line and 400 nm space patterning images with exposure dose of 5.0 μC/cm2 were provided by specific process conditions of EB lithography. The developed trehalose derivatives with hydroxyl groups and EB sensitive groups in the water-developable resist material derived from biomass were applicable to future development of high-sensitive and resolution negative type of water-developable resist material as a novel chemical design.

High-sensitivity green resist material with organic solvent-free spin-coating and tetramethylammonium hydroxide-free water-developable processes for EB and EUV lithography

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Hanabata, Makoto; Oshima, Akihiro; Kashiwakura, Miki; Kozawa, Takahiro; Tagawa, Seiichi

2015-03-01

We investigated the eco-friendly electron beam (EB) and extreme-ultraviolet (EUV) lithography using a high-sensitive negative type of green resist material derived from biomass to take advantage of organic solvent-free water spin-coating and tetramethylammonium hydroxide(TMAH)-free water-developable techniques. A water developable, non-chemically amplified, high sensitive, and negative tone resist material in EB lithography was developed for environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of TMAH. The material design concept to use the water-soluble resist material with acceptable properties such as pillar patterns with less than 100 nm in high EB sensitivity of 10 μC/cm2 and etch selectivity with a silicon-based middle layer in CF4 plasma treatment was demonstrated for EB and EUV lithography.

Development of NIRS method for quality control of drug combination artesunate–azithromycin for the treatment of severe malaria

PubMed Central

Boyer, Chantal; Gaudin, Karen; Kauss, Tina; Gaubert, Alexandra; Boudis, Abdelhakim; Verschelden, Justine; Franc, Mickaël; Roussille, Julie; Boucher, Jacques; Olliaro, Piero; White, Nicholas J.; Millet, Pascal; Dubost, Jean-Pierre

2012-01-01

Near infrared spectroscopy (NIRS) methods were developed for the determination of analytical content of an antimalarial-antibiotic (artesunate and azithromycin) co-formulation in hard gelatin capsule (HGC). The NIRS consists of pre-processing treatment of spectra (raw spectra and first-derivation of two spectral zones), a unique principal component analysis model to ensure the specificity and then two partial least-squares regression models for the determination content of each active pharmaceutical ingredient. The NIRS methods were developed and validated with no reference method, since the manufacturing process of HGC is basically mixed excipients with active pharmaceutical ingredients. The accuracy profiles showed β-expectation tolerance limits within the acceptance limits (±5%). The analytical control approach performed by reversed phase (HPLC) required two different methods involving two different preparation and chromatographic methods. NIRS offers advantages in terms of lower costs of equipment and procedures, time saving, environmentally friendly. PMID:22579599

77 FR 6790 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-09

.... Federal Coordinator's Comments. Liaisons' Comments. Presentations: [cir] The Ohio Valley Regional Development Center (OVRDC) Overview, John Hemmings, Executive Director of OVRDC. [cir] Waste Acceptance...

Use of QSARs in international decision-making frameworks to predict ecologic effects and environmental fate of chemical substances.

PubMed Central

Cronin, Mark T D; Walker, John D; Jaworska, Joanna S; Comber, Michael H I; Watts, Christopher D; Worth, Andrew P

2003-01-01

This article is a review of the use, by regulatory agencies and authorities, of quantitative structure-activity relationships (QSARs) to predict ecologic effects and environmental fate of chemicals. For many years, the U.S. Environmental Protection Agency has been the most prominent regulatory agency using QSARs to predict the ecologic effects and environmental fate of chemicals. However, as increasing numbers of standard QSAR methods are developed and validated to predict ecologic effects and environmental fate of chemicals, it is anticipated that more regulatory agencies and authorities will find them to be acceptable alternatives to chemical testing. PMID:12896861

Summer Undergraduate Research Program: Environmental studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

McMillan, J.

1994-12-31

The purpose of the summer undergraduate internship program for research in environmental studies is to provide an opportunity for well-qualified students to undertake an original research project as an apprentice to an active research scientist in basic environmental research. The students are offered research topics at the Medical University in the scientific areas of pharmacology and toxicology, epidemiology and risk assessment, environmental microbiology, and marine sciences. Students are also afforded the opportunity to work with faculty at the University of Charleston, SC, on projects with an environmental theme. Ten well-qualified students from colleges and universities throughout the eastern United Statesmore » were accepted into the program.« less

Geographic variation in social acceptability of wildland fuels management in the western United States

USGS Publications Warehouse

Brunson, M.; Schindler, Bruce A.

2004-01-01

Contemporary natural resource management requires consideration of the social acceptability of management practices and conditions. Agencies wishing to measure, respond to, and influence social acceptability must understand the nuances of public perception regarding controversial issues. This study explores social acceptability judgments about one such issue: reduction of wildland fuel hazards on federal lands in the western United States. Citizens were surveyed in four locations where fire has been a significant ecological disturbance agent and public land agencies propose to reduce wildland fuel levels and wildfire hazards via prescribed burning, thinning, brush removal, and/or livestock grazing. Respondents in different locations differed in their knowledge about fire and fuel issues as well in their acceptability judgments. Differences are associated with location-specific social and environmental factors as well as individual beliefs. Results argue against using a??one-size-fits-alla?? policies or information strategies about fuels management.

Is climate change an unforeseen, irresistible and external factor - A force majeure in marine environmental law?

PubMed

Saul, Roxanne; Barnes, Richard; Elliott, Michael

2016-12-15

Several environmental laws include provisions on natural causes or force majeure, which except States from their commitments if it can be proven that the failure to meet the commitment is due to factors outside their control. The European Union Marine Strategy Framework Directive (MSFD) has a pivotal role in managing EU marine waters. This paper analyses natural causes and force majeure provisions of the MFSD and other marine legislation, and addresses their interaction with climate change and its consequences, especially the effect on the obligation of ensuring seas are in Good Environmental Status. Climate change is an exogenic unmanaged pressure in that it emanates from outside the area being managed but in which the management authority has to respond to the consequences of climate change, such as sea level rise and temperature elevation, rather than its causes. It is suggested that a defence by a Member State of force majeure may be accepted if an event was proven to be due to an externality of control, irresistible and unforeseeable. The analysis contends that countering such a legal defence would centre on the fact that climate change is a well-accepted phenomenon, is foreseen with an accepted level of confidence and probability and is due to human actions. However, as yet, this has not been legally tested. Copyright © 2016 Elsevier Ltd. All rights reserved.

Environmental Health Problems and Indicators in Tabriz, Iran

PubMed Central

Ghozikali, Mohammad Ghanbari; Mosaferi, Mohammad; Naddafi, Kazem

2013-01-01

Background: Environmental Health Indicators (EHIs) are the most important criteria for evaluation of efficiency and effectiveness of the activities of the health sector. The operations and situation of the health system can be analyzed through surveying the indicators and comparing them during different times. The present study aimed to study the EHIs of Tabriz, using the common environmental health processes and national EHIs of the Ministry of Health. Method: The required information for determination of EHIs was collected from different sources, including mainly the Environmental Health Department of the Health Center of East Azerbaijan Province, Iran and other organizations. Results: We found some important desirable and undesirable EHIs in Tabriz,including high percentage of households with access to safe and reliable drinking water, high safety in microbiological and chemical quality of drinking water, acceptable level of BOD5 and COD in the effluent of wastewater treatment plants (WTP), lack of complete municipal wastewater collection and treatment, relatively poor sanitation and health of food markets and public places, undesirable collection,transportation and disposal of municipal solid waste, low EHIs of some school classrooms, unacceptable disposal of medical waste in some hospitals, and finally high level of noise pollution in the city. Conclusion: Considering the poor condition of some EHIs of Tabriz, implementing proper actions for promotion of the indicators especially development of municipal wastewater collection, improvement of solid waste management,environmental health of some schools and mosques, and finally the noise pollution level of the city is recommended. PMID:24688959

TERMINAL ELECTRON ACCEPTING PROCESSES IN THE ALLUVIAL SEDIMENTS OF A HEADWATER STREAM

EPA Science Inventory

Chemical fluxes between catchments and streams are influenced by biochemical processes in the groundwater-stream water (GW-SW) ecotone, the interface between stream surface water and groundwater. Terminal electron accepting processes (TEAPs) that are utilized in respiration of ...

Economic values and corporate financial statements.

PubMed

Magness, Vanessa

2003-07-01

Corporate financial statements do not include environmental values. This deficiency has contributed to the criticism that company managers do not include environmental impacts in the internal decision-making process. The accounting profession has not developed effective environmental reporting guidelines. This situation contributes to a second problem: the apparent inability of corporate reports to provide useful information to external parties. It has been suggested that by using nonmarket valuation methodologies, financial statements can be used to measure progress toward sustainable development. Nonmarket valuations are not generally accepted by the accounting profession. They are too subjective to support effective decisions, and too costly to obtain. Furthermore, demand for this sort of information appears small. Some of these issues may be resolved over time. The most serious challenge, however, concerns how enhanced financial reports would be used. Financial statements are supposed to help investors assess the amount, timing, and uncertainty of future cash flows. A substantial portion of environmental value is based on nonuse benefits, much of which will never be realized in company cash flows. In other words, the role of financial statements would have to change. Furthermore, since there is no general agreement as to the meaning of "sustainable development," efforts to operationalize the term have been fraught with difficulty. Moreover, monetization of environmental values could jeopardize their preservation, leaving some to question the overall objective of this form of reporting. For these reasons, while it is to be hoped that better reporting of environmental impacts will be forthcoming, the greatest advances will likely be outside the financial statements themselves.

COOP+ project: Promoting the cooperation of international Research Infrastructures to address global environmental challenges.

NASA Astrophysics Data System (ADS)

Bonet-García, F.; Järvi, L.; Asmi, A.; Suárez-Muñoz, M.

2016-12-01

Humanity must face enormous environmental challenges including biodiversity decline, climate change, ocean acidification, sea level rise and overpopulation. The research infrastructures (RIs) created in the last decades worldwide cover a wide range of spatial and thematic scales and collect information about the functioning of Earth ecosystems. However, we need to go one step forward: understand and simulate the functioning of the Earth as a complex system in a global change scenario. Cooperation among international RIs as well as multidisciplinary work are mandatory to achieve this challenging objective. COOP+ (EU Horizon 2020 project) aims to strengthen the links and coordination of European environmental RIs with their international counterparts. COOP+ will create cooperation threads among international research infrastructures using environmental Global Challenges (GCs) as thematic guidelines. These GCs are polyhedral and sometimes wicked problems that threaten the sustainability of our modern societies from a social and environmental perspective. This contribution describes how COOP+ uses GCs as guidelines to foster cooperation among RIs. First we have created an open survey to collect ideas about GCs within the different scientific communities. We present the structure of this survey as well as the preliminary information that it contains. The survey will be accepting responses during the project life (September 2018). We also describe the structure of a template that will be used to collaboratively characterize some selected GCs under the point of view of RIs. The main idea is to assess how RIs can be useful to address global environmental problems. We encourage all scientists related to RIs communities to participate in this process.

Barriers to and facilitators of the acceptance process for individuals with serious mental illness.

PubMed

Mizock, Lauren; Russinova, Zlatka; Millner, Uma Chandrika

2014-09-01

The process of acceptance of mental illness is a central component of recovery and has been linked to functioning, illness management, and quality of life. A number of barriers and facilitators have been theorized as impacting this process. This study was conducted with 30 participants with serious mental illness (a major psychiatric disorder with impairment in multiple areas of functioning) to elicit the barriers to and facilitators of the acceptance of mental illness. Grounded theory methodology was utilized to analyze the 30 semistructured interviews. Results revealed barriers to and facilitators of acceptance of mental illness at the micro level (cognitive, emotional, behavioral, identity-related), meso level (relational), and macro level (cultural, systemic). Clinical and research implications are discussed with regard to facilitating acceptance of mental illness. © The Author(s) 2014.

High-Redundancy Draft Sequencing of 15 Clinical and Environmental Burkholderia Strains

DTIC Science & Technology

2010-12-01

Environmental Burkholderia Strains 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...Environmental Burkholderia Strains v Sanghamitra Mukhopadhyay, 1t Maureen K. Thomason, 1t Shannon Lentz, 1 Nichok Nolan, 1 Kristin Willner, 1§ Jay E. Gee...PathWest Laboratory Medicine WA, Ned/and~, WA 6009, Australia:< Received 20 Au~,rust 2010/Accepted 30 August 2010 The Gram-negative Burkholderia genus

Multi-laboratory survey of qPCR enterococci analysis method performance

EPA Pesticide Factsheets

Quantitative polymerase chain reaction (qPCR) has become a frequently used technique for quantifying enterococci in recreational surface waters, but there are several methodological options. Here we evaluated how three method permutations, type of mastermix, sample extract dilution and use of controls in results calculation, affect method reliability among multiple laboratories with respect to sample interference. Multiple samples from each of 22 sites representing an array of habitat types were analyzed using EPA Method 1611 and 1609 reagents with full strength and five-fold diluted extracts. The presence of interference was assessed three ways: using sample processing and PCR amplifications controls; consistency of results across extract dilutions; and relative recovery of target genes from spiked enterococci in water sample compared to control matrices with acceptable recovery defined as 50 to 200%. Method 1609, which is based on an environmental mastermix, was found to be superior to Method 1611, which is based on a universal mastermix. Method 1611 had over a 40% control assay failure rate with undiluted extracts and a 6% failure rate with diluted extracts. Method 1609 failed in only 11% and 3% of undiluted and diluted extracts analyses. Use of sample processing control assay results in the delta-delta Ct method for calculating relative target gene recoveries increased the number of acceptable recovery results. Delta-delta tended to bias recoveries fr

Process Improvements in Training Device Acceptance Testing: A Study in Total Quality Management

DTIC Science & Technology

1990-12-12

Quality Management , a small group of Government and industry specialists examined the existing training device acceptance test process for potential improvements. The agreed-to mission of the Air Force/Industry partnership was to continuously identify and promote implementable approaches to minimize the cost and time required for acceptance testing while ensuring that validated performance supports the user training requirements. Application of a Total Quality process improvement model focused on the customers and their requirements, analyzed how work was accomplished, and

The language of nature matters: we need a more public ecology

Treesearch

Bruce R. Hull; David P. Robertson

2000-01-01

The language we use to describe nature matters. It is used by policy analysts to set goals for ecological restoration and management, by scientists to describe the nature that did, does, or could exist, and by all of us to imagine possible and acceptable conditions of environmental quality. Participants in environmental decision making demand a lot of the language and...

Environmental Assessment of Beale AFB Grazing Lease Program

DTIC Science & Technology

2012-12-01

Beale AFB will use livestock (cattle, sheep and goats ) on its properties throughout the year as needed for the control of noxious weeds, reduction...initiating a wildfire. California Farm Bureau Federation policy recognizes that grazing is the most practical and environmentally acceptable way to...Site Monitoring Well Installation and Annual Targeted Goat Grazing Project, Placer County, California. 21 September 2011.  

Legionella detection by culture and qPCR: Comparing apples and oranges.

PubMed

Whiley, Harriet; Taylor, Michael

2016-01-01

Legionella spp. are the causative agent of Legionnaire's disease and an opportunistic pathogen of significant public health concern. Identification and quantification from environmental sources is crucial for identifying outbreak origins and providing sufficient information for risk assessment and disease prevention. Currently there are a range of methods for Legionella spp. quantification from environmental sources, but the two most widely used and accepted are culture and real-time polymerase chain reaction (qPCR). This paper provides a review of these two methods and outlines their advantages and limitations. Studies from the last 10 years which have concurrently used culture and qPCR to quantify Legionella spp. from environmental sources have been compiled. 26/28 studies detected Legionella at a higher rate using qPCR compared to culture, whilst only one study detected equivalent levels of Legionella spp. using both qPCR and culture. Aggregating the environmental samples from all 28 studies, 2856/3967 (72%) tested positive for the presence of Legionella spp. using qPCR and 1331/3967 (34%) using culture. The lack of correlation between methods highlights the need to develop an acceptable standardized method for quantification that is sufficient for risk assessment and management of this human pathogen.

Understanding and applying principles of social cognition and ...

EPA Pesticide Factsheets

Environmental governance systems are under greater pressure to adapt and to cope with increased social and ecological uncertainty from stressors like climate change. We review principles of social cognition and decision making that shape and constrain how environmental governance systems adapt. We focus primarily on the interplay between key decision makers in society and legal systems. We argue that adaptive governance must overcome three cooperative dilemmas to facilitate adaptation: (1) encouraging collaborative problem solving, (2) garnering social acceptance and commitment, and (3) cultivating a culture of trust and tolerance for change and uncertainty. However, to do so governance systems must cope with biases in people’s decision making that cloud their judgment and create conflict. These systems must also satisfy people’s fundamental needs for self-determination, fairness, and security, ensuring that changes to environmental governance are perceived as legitimate, trustworthy, and acceptable. We discuss the implications of these principles for common governance solutions (e.g., public participation, enforcement) and conclude with methodological recommendations. We outline how scholars can investigate the social cognitive principles involved in cases of adaptive governance. Social-ecological stressors place significant pressure on major societal systems, triggering adaptive reforms in human governance and environmental law. Though potentially benefici

Awareness of environmental issues and the acceptance of CFC-free inhalers.

PubMed

Goh, S Y; Arulanandam, S; Ho, C L; Zhang, L; Goh, D Y; Chew, F T; Lee, B W

1998-09-01

With the recent availability of a chlorofluorocarbon (CFC)-free metered dose inhaler (MDI) (Airomir), a patient survey was carried out to evaluate awareness of the role of CFCs in our environment and acceptance of this new inhaler. A questionnaire survey was conducted on parents and guardians of 201 children. Depending on respondents' preference, the interview was conducted in English (71%), Chinese (23%), Malay (5%) or Tamil (1%). A 'taste' test was also conducted on 103 of these children. Only 13% (26/201) of parents/guardians were aware that MDIs contained CFCs. Although 70% of children were in favour of the new taste of the CFC-free inhaler, the cost of the new inhaler was an important consideration for parents and guardians in their decision to switch to the new inhaler. The majority (93%) were willing to switch if its cost were equivalent to their current inhaler. This study has provided pertinent information with regard to acceptance of CFC-free inhalers which should be considered when making the inevitable switch to environmentally friendly inhalers.

A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

NASA Astrophysics Data System (ADS)

Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

2016-03-01

Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

A systematic review of patient acceptance of consumer health information technology.

PubMed

Or, Calvin K L; Karsh, Ben-Tzion

2009-01-01

A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation.

Dark chocolate acceptability: influence of cocoa origin and processing conditions.

PubMed

Torres-Moreno, Miriam; Tarrega, Amparo; Costell, Elvira; Blanch, Consol

2012-01-30

Chocolate properties can vary depending on cocoa origin, composition and manufacturing procedure, which affect consumer acceptability. The aim of this work was to study the effect of two cocoa origins (Ghana and Ecuador) and two processing conditions (roasting time and conching time) on dark chocolate acceptability. Overall acceptability and acceptability for different attributes (colour, flavour, odour and texture) were evaluated by 95 consumers. Differences in acceptability among dark chocolates were mainly related to differences in flavour acceptability. The use of a long roasting time lowered chocolate acceptability in Ghanaian samples while it had no effect on acceptability of Ecuadorian chocolates. This response was observed for most consumers (two subgroups with different frequency consumption of dark chocolate). However, for a third group of consumers identified as distinguishers, the most acceptable dark chocolate samples were those produced with specific combinations of roasting time and conching time for each of the cocoa geographical origin considered. To produce dark chocolates from a single origin it is important to know the target market preferences and to select the appropriate roasting and conching conditions. Copyright © 2011 Society of Chemical Industry.

Thematic mapper flight model preshipment review data package. Volume 4: Appendix. Part B: Scan mirror assembly data

NASA Technical Reports Server (NTRS)

1982-01-01

Data from the thematic mapper scan mirror assembly (SMA) acceptance test are presented. Documentation includes: (1) a list of the acceptance test discrepancies; (2) flight 1 SMA test data book; (3) flight 1 SMA environmental report; (4) the configuration verification index; (5) the flight 1 SMA test failure reports; (6) the flight 1 data tapes log; and (7) the requests for deviation/waivers.

Institutional environmental impact statement (space shuttle development and operations) amendment no. 1. [space shuttle operations at Kennedy Space Center

NASA Technical Reports Server (NTRS)

1973-01-01

Data are presented to support the environmental impact statement on space shuttle actions at Kennedy Space Center. Studies indicate that land use to accommodate space shuttle operations may have the most significant impact. The impacts on air, water and noise quality are predicted to be less on the on-site environment. Considerations of operating modes indicate that long and short term land use will not affect wildlife productivity. The potential for adverse environmental impact is small and such impacts will be local, short in duration, controllable, and environmentally acceptable.

45 CFR 96.136 - Independent peer review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology, resources, and patient/client circumstances, will meet accepted standards and practices which... approach to addictions treatment, and must be sensitive to the cultural and environmental issues that may...

Managing Environmental Stress: An Evaluation of Environmental Management of the Long Point Sandy Barrier, Lake Erie, Canada.

PubMed

Kreutzwiser; Gabriel

2000-01-01

/ This paper assesses the extent to which key geomorphic components, processes, and stresses have been reflected in the management of a coastal sandy barrier environment. The management policies and practices of selected agencies responsible for Long Point, a World Biosphere Reserve along Lake Erie, Canada, were evaluated for consistency with these principles of environmental management for sandy barriers: maintaining natural stresses essential to sandy barrier development and maintenance;protecting sediment sources, transfers, and storage; recognizing spatial variability and cyclicity of natural stresses, such as barrier overwash events; and accepting and planning for long-term evolutionary changes in the sandy barrier environment. Generally, management policies and practices have not respected the dynamic and sensitive environment of Long Point because of limited mandates of the agencies involved, inconsistent policies, and failure to apply or enforce existing policies. This is particularly evident with local municipalities and less so for the Canadian Wildlife Service, the federal agency responsible for managing National Wildlife Areas at the point. In the developed areas of Long Point, landward sediment transfers and sediment storage in dunes have been impacted by cottage development, shore protection, and maintenance of roads and parking lots. Additionally, agencies responsible for managing Long Point have no jurisdiction over sediment sources as far as 95 km away. Evolutionary change of sandy barriers poses the greatest challenge to environmental managers.

The legal framework to manage chemical pollution in India and the lesson from the Persistent Organic Pollutants (POPs).

PubMed

Sharma, Brij Mohan; Bharat, Girija K; Tayal, Shresth; Nizzetto, Luca; Larssen, Thorjørn

2014-08-15

India's rapid agro-economic growth has resulted into many environmental issues, especially related to chemical pollution. Environmental management and control of toxic chemicals have gained significant attention from policy makers, researchers, and enterprises in India. The present study reviews the policy and legal and non-regulatory schemes set in place in this country during the last decades to manage chemical risk and compares them with those in developed nations. India has a large and fragmented body of regulation to control and manage chemical pollution which appears to be ineffective in protecting environment and human health. The example of POPs contamination in India is proposed to support such a theory. Overlapping of jurisdictions and retrospectively approached environmental policy and risk management currently adopted in India are out of date and excluding Indian economy from the process of building and participating into new, environmentally-sustainable market spaces for chemical products. To address these issues, the introduction of a new integrated and scientifically-informed regulation and management scheme is recommended. Such scheme should acknowledge the principle of risk management rather than the current one based on risk acceptance. To this end, India should take advantage of the experience of recently introduced chemical management regulation in some developed nations. Copyright © 2014 Elsevier B.V. All rights reserved.

Combined cumulative sum (CUSUM) and chronological environmental analysis as a tool to improve the learning environment for linear-probe endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) trainees: a pilot study.

PubMed

Norisue, Yasuhiro; Tokuda, Yasuharu; Juarez, Mayrol; Uchimido, Ryo; Fujitani, Shigeki; Stoeckel, David A

2017-02-07

Cumulative sum (CUSUM) analysis can be used to continuously monitor the performance of an individual or process and detect deviations from a preset or standard level of achievement. However, no previous study has evaluated the utility of CUSUM analysis in facilitating timely environmental assessment and interventions to improve performance of linear-probe endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA). The aim of this study was to evaluate the usefulness of combined CUSUM and chronological environmental analysis as a tool to improve the learning environment for EBUS-TBNA trainees. This study was an observational chart review. To determine if performance was acceptable, CUSUM analysis was used to track procedural outcomes of trainees in EBUS-TBNA. To investigate chronological changes in the learning environment, multivariate logistic regression analysis was used to compare several indices before and after time points when significant changes occurred in proficiency. Presence of an additional attending bronchoscopist was inversely associated with nonproficiency (odds ratio, 0.117; 95% confidence interval, 0-0.749; P = 0.019). Other factors, including presence of an on-site cytopathologist and dose of sedatives used, were not significantly associated with duration of nonproficiency. Combined CUSUM and chronological environmental analysis may be useful in hastening interventions that improve performance of EBUS-TBNA.

Planning an adaptive management process for biodiversity conservation and resource development in the Camisea River Basin.

PubMed

Dallmeier, Francisco; Alonso, Alfonso; Jones, Murray

2002-05-01

The Smithsonian Institution's Monitoring and Assessment of Biodiversity Program joined Shell Prospecting and Development Peru (SPDP) to protect biodiversity during a natural gas exploration project. Emphasis was on long-term societal and environmental benefits in addition to financial gain for the company. The systematic, cyclical adaptive management process was used to generate feedback for SPDP managers. Adaptive management enables ongoing improvement of management policies and practices based on lessons learned from operational activities. Previous to this study, very little information about the local biodiversity was available. Over a 2-year period, the team conducted biological assessments of six taxonomic groups at five sites located within 600 km2. A broad range of management options such as location, timing and technology were developed from the beginning of the project. They were considered in conjunction with emerging lessons from the biodiversity assessments. Critical decisions included location of a gas plant and the cost of helicopter access versus roads to service the full field development. Both of these decisions were evaluated to ensure that they were economically and environmentally feasible. Project design changes, addressed in the planning stage, were accepted once consensus was achieved. Stakeholders were apprised of the implications of the baseline biodiversity assessments.

Public participation in Strategic Environmental Assessment: A practitioners' perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rega, Carlo, E-mail: carlo.rega@jrc.ec.europa.eu; Baldizzone, Giorgio

Public participation is considered a distinguished feature of Strategic Environmental Assessment (SEA), and the SEA literature has traditionally identified several benefits attached to it, from more open and transparent decision-making to greater acceptance of plans/programmes' output by the affected population. However, relatively little empirical evidence has been collected so far on the extent and outcomes of public engagement as it is being carried out in current SEA practice. In this article, we present the results of a study on this theme based on a direct survey of 47 SEA practitioners and scholars from different countries. Respondents were asked to reportmore » their experience about a number of items including: the frequency of SEA process featuring deep public participation; its overall influence on plan/programmme-making; the identification of the main factors impeding it; the correlation of public involvement with environmental outcomes; and the increase of costs. Results indicate that public engagement in current SEA practice is still relatively limited and with limited influence on decision-making. The main impeding factors seem to be: lack of political willingness by proponents; insufficient information on the SEA process by the public; and weakness of the legal frames. However, respondents also report that when effective public engagement takes place, benefits do arise and identify a positive correlation between the degree of public involvement and the environmental performance of plans and programmes. Overall, findings suggest that public involvement has indeed the potential to positively influence both SEA and decision-making, although this should be supported from the policy side by stronger legal frames, higher requirements and improved technical guidance. - Highlights: • 47 SEA scholars and practitioners were surveyed about public participation in SEA. • Current public involvement in SEA is still limited. • Lack of information, political willingness and weaknesses of the legal frame are the main issues. • A positive correlation emerges between public involvement and the environmental outputs of P/P.« less

Process Acceptance and Adoption by IT Software Project Practitioners

ERIC Educational Resources Information Center

Guardado, Deana R.

2012-01-01

This study addresses the question of what factors determine acceptance and adoption of processes in the context of Information Technology (IT) software development projects. This specific context was selected because processes required for managing software development projects are less prescriptive than in other, more straightforward, IT…

Integrated Sensing and Processing in Missile Systems

DTIC Science & Technology

2004-03-31

Nanoprobes: The Geometry of Processing and Sensing," H. A. Schmitt, et al., 5th Asian Control Conference, Melbourne, Australia, 2004, accepted. 17. [CR...Computers, Special session on "Signal Processing for Agile Sensors, Pacific Grove, CA, 7-10 November 2004, accepted. 20. [CI] "Computational Origami for

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendell, Mark J.; Fisk, William J.

Background - The goal of this project, with a focus on commercial buildings in California, was to develop a new framework for evidence-based minimum ventilation rate (MVR) standards that protect occupants in buildings while also considering energy use and cost. This was motivated by research findings suggesting that current prescriptive MVRs in commercial buildings do not provide occupants with fully safe and satisfactory indoor environments. Methods - The project began with a broad review in several areas ? the diverse strategies now used for standards or guidelines for MVRs or for environmental contaminant exposures, current knowledge about adverse human effectsmore » associated with VRs, and current knowledge about contaminants in commercial buildings, including their their presence, their adverse human effects, and their relationships with VRs. Based on a synthesis of the reviewed information, new principles and approaches are proposed for setting evidence-based VRs standards for commercial buildings, considering a range of human effects including health, performance, and acceptability of air. Results ? A review and evaluation is first presented of current approaches to setting prescriptive building ventilation standards and setting acceptable limits for human contaminant exposures in outdoor air and occupational settings. Recent research on approaches to setting acceptable levels of environmental exposures in evidence-based MVR standards is also described. From a synthesis and critique of these materials, a set of principles for setting MVRs is presented, along with an example approach based on these principles. The approach combines two sequential strategies. In a first step, an acceptable threshold is set for each adverse outcome that has a demonstrated relationship to VRs, as an increase from a (low) outcome level at a high reference ventilation rate (RVR, the VR needed to attain the best achievable levels of the adverse outcome); MVRs required to meet each specific outcome threshold are estimated; and the highest of these MVRs, which would then meet all outcome thresholds, is selected as the target MVR. In a second step, implemented only if the target MVR from step 1 is judged impractically high, costs and benefits are estimated and this information is used in a risk management process. Four human outcomes with substantial quantitative evidence of relationships to VRs are identified for initial consideration in setting MVR standards. These are: building-related symptoms (sometimes called sick building syndrome symptoms), poor perceived indoor air quality, and diminished work performance, all with data relating them directly to VRs; and cancer and non-cancer chronic outcomes, related indirectly to VRs through specific VR-influenced indoor contaminants. In an application of step 1 for offices using a set of example outcome thresholds, a target MVR of 9 L/s (19 cfm) per person was needed. Because this target MVR was close to MVRs in current standards, use of a cost/benefit process seemed unnecessary. Selection of more stringent thresholds for one or more human outcomes, however, could raise the target MVR to 14 L/s (30 cfm) per person or higher, triggering the step 2 risk management process. Consideration of outdoor air pollutant effects would add further complexity to the framework. For balancing the objective and subjective factors involved in setting MVRs in a cost-benefit process, it is suggested that a diverse group of stakeholders make the determination after assembling as much quantitative data as possible.« less

An investigation into waste charges in Ireland, with emphasis on public acceptability.

PubMed

Dunne, Louise; Convery, Frank J; Gallagher, Louise

2008-12-01

There are 34 local authorities in Ireland with legal responsibility to deal with waste arising in their jurisdictions. In 2003 the National government introduced legislation that allows local authorities to recover the costs of waste collection and disposal, and to do so by 'executive function', i.e., not requiring support or agreement by the relevant local political representatives. The year 2005 was set as the date by which implementation of a pay by weight or volume was to be introduced. The local authorities were given autonomy as to how they addressed this challenge, so we have - in theory - 34 potentially different experiences from which to learn. This paper examines the pay-as-you-throw (PAYT) waste system in Ireland as it develops in line with EU and National demands, with a view to assessing economic and environmental efficiency. All local authorities were surveyed and thirteen responded. While this only represents about 38% of the total number, it includes jurisdictions that contribute in total more than 50% of waste arising. Key figures in the policy and business community were also interviewed in order to identify how the charging schemes were implemented, and to what effect. These insights and parallel investigations are used to review the potential for problems regarding public acceptability of environmental taxes and examine the evidence for economic and environmental efficiency, as well as problem areas, using data from each of the responding local authority jurisdictions. Concentrating on the incentives and drivers across households, municipalities and private waste contractors, the variations in charging system, annual charges and landfill charges are compared where information was available. The various jurisdictions are also examined in terms of relative successes and problems encountered in the transition from fixed charge or free waste collection to PAYT systems. The Irish situation is placed in the context of the international literature on PAYT, the growing waste crisis, environmental attitudes vs. behaviours, and the acceptability of environmental taxes generally.

Proceedings - Limits of Acceptable Change and related planning processes: Progress and future directions

Treesearch

Stephen F. McCool; David N. Cole

1997-01-01

Experience with Limits of Acceptable Change (LAC) and related planning processes has accumulated since the mid-1980's. These processes were developoed as a means of dealing with recreation carrying capacity issues in wilderness and National Parks. These processes clearly also have application outside of protected areas and to issues other than recreation...

Integrating community perceptions and cultural diversity in social impact assessment in Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nzeadibe, Thaddeus Chidi, E-mail: chidi.nzeadibe@unn.edu.ng; Ajaero, Chukwuedozie Kelechukwu; Okonkwo, Emeka Emmanuel

The Environmental Impact Assessment (EIA) Act of 1992 aimed to make the environment a central theme in development in Nigeria. Nevertheless, the extent of engagement with local cultures in the Nigerian EIA process is not statutorily guaranteed. While most EIAs in Nigeria have been for oil and gas projects in the Niger Delta, and have focused strongly on the biophysical environment, socio-economic and cultural aspects have remained marginal. The palpable neglect of community perceptions and cultural diversity in social impact assessment (SIA) in this region prone to conflict has tended to alienate the people in the decision-making process. Thus, despitemore » claims to compliance with regulatory requirements for EIAs, and numerous purported sustainable development initiatives by international oil companies (IOCs), the region continues to face multiple sustainability challenges. This paper situates local perceptions and cultural diversity in participatory development and canvasses the integration of community perceptions and cultural diversity into SIA in the Niger Delta region. It is argued that doing this would be critical to ensuring acceptance and success of development actions within the context of local culture while also contributing to sustainable development policy in the region. - Highlights: • Nigeria EIA Act aimed to make the environment central to development in Nigeria. • Engagement with local communities in the process is not statutorily guaranteed. • SIAs in Nigeria neglect community perceptions and cultural diversity. • Article canvasses integrating community perceptions and cultural diversity in SIA. • Local acceptance in context of culture would yield sustainable development outcomes.« less

Hearing aids: indications, technology, adaptation, and quality control

PubMed Central

Hoppe, Ulrich; Hesse, Gerhard

2017-01-01

Hearing loss can be caused by a number of different pathological conditions. Some of them can be successfully treated, mainly by surgery, depending on the individual’s disease process. However, the treatment of chronic sensorineural hearing loss with damaged cochlear structures usually needs hearing rehabilitation by means of technical amplification. During the last two decades tremendous improvements in hearing aid technology led to a higher quality of the hearing rehabilitation process. For example, due to sophisticated signal processing acoustic feedback could be reduced and hence open fitting options are available even for more subjects with higher degrees of hearing loss. In particular for high-frequency hearing loss, the use of open fitting is an option. Both the users’ acceptance and the perceived sound quality were significantly increased by open fittings. However, we are still faced with a low level of readiness in many hearing impaired subjects to accept acoustic amplification. Since ENT specialists play a key-role in hearing aid provision, they should promote early hearing aid rehabilitation and include this in the counselling even in subjects with mild and moderate hearing loss. Recent investigations demonstrated the benefit of early hearing aid use in this group of patients since this may help to reduce subsequent damages as auditory deprivation, social isolation, development of dementia, and cognitive decline. For subjects with tinnitus, hearing aids may also support masking by environmental sounds and enhance cortical inhibition. The present paper describes the latest developments of hearing aid technology and the current state of the art for amplification modalities. Implications for both hearing aid indication and provision are discussed. PMID:29279726

A fuzzy stochastic framework for managing hydro-environmental and socio-economic interactions under uncertainty

NASA Astrophysics Data System (ADS)

Subagadis, Yohannes Hagos; Schütze, Niels; Grundmann, Jens

2014-05-01

An amplified interconnectedness between a hydro-environmental and socio-economic system brings about profound challenges of water management decision making. In this contribution, we present a fuzzy stochastic approach to solve a set of decision making problems, which involve hydrologically, environmentally, and socio-economically motivated criteria subjected to uncertainty and ambiguity. The proposed methodological framework combines objective and subjective criteria in a decision making procedure for obtaining an acceptable ranking in water resources management alternatives under different type of uncertainty (subjective/objective) and heterogeneous information (quantitative/qualitative) simultaneously. The first step of the proposed approach involves evaluating the performance of alternatives with respect to different types of criteria. The ratings of alternatives with respect to objective and subjective criteria are evaluated by simulation-based optimization and fuzzy linguistic quantifiers, respectively. Subjective and objective uncertainties related to the input information are handled through linking fuzziness and randomness together. Fuzzy decision making helps entail the linguistic uncertainty and a Monte Carlo simulation process is used to map stochastic uncertainty. With this framework, the overall performance of each alternative is calculated using an Order Weighted Averaging (OWA) aggregation operator accounting for decision makers' experience and opinions. Finally, ranking is achieved by conducting pair-wise comparison of management alternatives. This has been done on the basis of the risk defined by the probability of obtaining an acceptable ranking and mean difference in total performance for the pair of management alternatives. The proposed methodology is tested in a real-world hydrosystem, to find effective and robust intervention strategies for the management of a coastal aquifer system affected by saltwater intrusion due to excessive groundwater extraction for irrigated agriculture and municipal use. The results show that the approach gives useful support for robust decision-making and is sensitive to the decision makers' degree of optimism.

EDITORIAL: Ensuring sustainability with green nanotechnology Ensuring sustainability with green nanotechnology

NASA Astrophysics Data System (ADS)

Wong, Stanislaus; Karn, Barbara

2012-07-01

Nanotechnology offers immense promise for developing new technologies that are more sustainable than current technologies. All major industrial sectors have felt nanotechnology's impact, mainly from the incorporation of nanomaterials into their products. For example, nanotechnology has improved the design and performance of products in areas as diverse as electronics, medicine and medical devices, food and agriculture, cosmetics, chemicals, materials, coatings, energy, as well as many others. Moreover, the revenues from nanotechnology-enabled products are not trivial. For instance, Lux Research maintains that commercial sales in both Europe and the USA will attain revenues of over 1 trillion from nano-enabled products by 2015. The manufacturing of the nanomaterials for these products uses many processes equivalent to chemical manufacturing processes. As a result, manufacturing nanomaterials can produce either harmful pollutants or adverse environmental impacts similar to those from chemical manufacturing. Unlike the chemical industry, however, those same processes are not ingrained in the manufacturing of nanomaterials, and the opportunity exists at the initial design stage to purposely account for and mitigate out potentially harmful environmental impacts. While prevention has not been a priority in current industries, it can become a main concern for the new and future industries that manufacture nanomaterials on a bulk commercial scale. This is where green nanotechnology comes in. Green nanotechnology involves deliberate efforts aimed at developing meaningful and reasonable protocols for generating products and their associated production processes in a benign fashion. The goal is a conscious minimization of risks associated with the products of nanoscience. The green products of nanotechnology are those that are used in either direct or indirect environmental applications. Direct environmental applications provide benefits such as monitoring using nano-enabled sensors, remediation of hazardous waste sites with nanomaterials, or treatment of wastewater and drinking water with nanomaterials. Indirect environmental applications include, for example, the saved energy associated with either lighter nanocomposite materials in transport vehicles or reduced waste from smaller products. The production and process aspects of green nanotechnology involve both making nanomaterials in a more environmentally benign fashion and using nanomaterials to make current chemical processes more environmentally acceptable. Examples of producing nanomaterials in a 'greener manner' could involve but are not limited to the use of supercritical CO2, water, or ionic liquids to replace a volatile organic solvent. Either self-assembly or templating might also be used to eliminate waste in manufacturing. Renewables could be utilized as replacements for either nonrenewable and/or toxic starting materials. Microwave techniques might potentially help to conserve energy, as could both facile thermal and hydrothermal processes. Catalytic and photocatalytic reactions could also increase efficiency and decrease the formation of harmful byproducts. In addition, engineered nanomaterials themselves can be used as catalysts in current chemical processes and as separation membranes to aid in the efficiency of these operations. Furthermore, in order to be truly green, these products and processes must be considered within a lifecycle framework. The papers in this special issue are but a small sampling of the myriad of possibilities that green nanotechnology holds. In the nascent nanotechnology industry, green nanotechnology offers the opportunity to get it right in the first place. It is not too late to take Ben Franklin's words to heart, 'an ounce of prevention is worth a pound of cure'.

An Elaboration Likelihood Model Based Longitudinal Analysis of Attitude Change during the Process of IT Acceptance via Education Program

ERIC Educational Resources Information Center

Lee, Woong-Kyu

2012-01-01

The principal objective of this study was to gain insight into attitude changes occurring during IT acceptance from the perspective of elaboration likelihood model (ELM). In particular, the primary target of this study was the process of IT acceptance through an education program. Although the Internet and computers are now quite ubiquitous, and…

Environmental influence on population dynamics of the bivalve Anomalocardia brasiliana

NASA Astrophysics Data System (ADS)

Corte, Guilherme Nascimento; Coleman, Ross A.; Amaral, A. Cecília Z.

2017-03-01

Understanding how species respond to the environment in terms of population attributes (e.g. abundance, growth, mortality, fecundity, and productivity) is essential to protect ecologically and economically important species. Nevertheless, responses of macrobenthic populations to environmental features are overlooked due to the need of consecutive samplings and time-consuming measurements. We examined the population dynamics of the filter-feeding bivalve Anomalocardia brasiliana on a tidal flat over the course of one year to investigate the hypothesis that, as accepted for macrobenthic communities, populations inhabiting environments with low hydrodynamic conditions such as tidal flat should have higher attributes than populations inhabiting more energetic habitats (i.e. areas more influenced by wave energy such as reflective and intermediate beaches). This would be expected because the harsh conditions of more energetic habitats force organisms to divert more energy towards maintenance, resulting in lower population attributes. We found that A. brasiliana showed moderate growth and secondary production at the study area. Moreover the recruitment period was restricted to a few months. A comparison with previous studies showed that, contrary to expected, A. brasiliana populations from areas with low hydrodynamic conditions have lower abundance, growth, recruitment and turnover rate. It is likely that morphodynamic characteristics recorded in these environments, such as larger periods of air exposure and lower water circulation, may affect food conditions for filter-feeding species and increase competition. In addition, these characteristics may negatively affect macrobenthic species by enhancing eutrophication processes and anoxia. Overall, our results suggest that models accepted and applied at the macrobenthic community level might not be directly extended to A. brasiliana populations.

Approaches for Sustainable Mitigation of Arsenic Calamity in Bangladesh: Search for Safe Drinking Water

NASA Astrophysics Data System (ADS)

Alauddin, M.; Bhattacharjee, M.; Zakaria, A. B.; Rahman, M. M.; Seraji, M. S.

2008-05-01

Arsenic contamination of groundwater in Gangetic plain of Bihar, West Bengal in India and Bengal delta plain Bangladesh is shaping up as the greatest environmental health disaster in the current century. About 450 million combined population in these regions are at risk of developing adverse health effects due to arsenic contamination in groundwater. For an effective and sustainable mitigation, it is essential that we improve our understanding of fundamental processes of arsenic mobilization in sediments, biogeochemistry of arsenic in aquifer sediments and weigh a wide range of options for arsenic safe water for the vast population. In this paper, aspects of arsenic removal technology from groundwater in affected areas, sustainable development of household water filtration systems, deep aquifer water as potential arsenic safe water will be presented. In addition, sustainable development of water purification systems such as pond sand filtration (PSF), river sand filtration (RSF), rain water harvesting (RWH), dug well and their acceptability by the community will be discussed. A recent development of indigenous technology by local masons involves searching safe water through bore hole sediment color. The viability of this option in certain areas of Bangladesh will be discussed. Also, one of the household filtration systems approved by the government and locally known as SONO filter was recognized recently by the National Academy of Engineering -Grainger Challenge Prize for sustainability. Over 30, 000 of this unit were deployed in arsenic affected areas of Bangladesh. The affordability, ease of maintenance, social acceptability and environmental friendliness of all options will be addressed in the presentation.

Oil shale development and its environmental considerations

USGS Publications Warehouse

Stone, R.T.; Johnson, H.; Decora, A.

1974-01-01

The petroleum shortage recently experienced by many nations throughout the world has created an intense interest in obtaining new and supplemental energy sources. In the United States, this interest has been centered on oil shale. Any major action by the federal government having significant environmental effects requires compliance with the National Environmental Policy Act of 1969 (NEPA). Since most oil shale is found on federal lands, and since its development involves significant environmental impacts, leasing oil shale lands to private interests must be in compliance with NEPA. For oil shale, program planning began at approximately the same time that NEPA was signed into law. By structuring the program to permit a resource and technological inventory by industry and the federal agencies, the Department of the Interior was able simultaneously to conduct the environmental assessments required by the act. This required: 1. Clearly defined program objections; 2. An organization which could integrate public policy with diverse scientific disciplines and environmental concerns; and 3. Flexible decisionmaking to adjust to policy changes as well as to evolving interpretations on EPA as clarified by court decisions. This paper outlines the program, the organization structure that was created for this specific task, and the environmental concerns which were investigated. The success of the program has been demonstrated by meeting the requirements of NEPA, without court challenge, and by industry's acceptance of a leasing program that included the most stringent environmental protection provisions ever required. The need for energy development has spurred the acceptance of the program. However, by its awareness and willingness to meet the environmental challenges of the future, industry has shown a reasonable understanding of its commitments. The pros and cons of development were publicly considered in hearings and analyzed in the final environmental statement. This action aided greatly in preventing legal challenges. The prototype oil shale program is now under way and this new energy source, developed with strict environmental safeguards, may soon be available to our nation.

78 FR 54868 - New England Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

... the Omnibus Essential Fish Habitat Amendment Draft Environmental Impact Statement (DEIS) based on... year 2014. The Scientific and Statistical Committee will report on its acceptable biological catch (ABC...

The Process of Accepting Technology Innovation for Rural Teachers

ERIC Educational Resources Information Center

Cerovski, Jeremy

2016-01-01

In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

A Contract Between Science and Society

NASA Astrophysics Data System (ADS)

Dowdeswell, Elizabeth

2009-05-01

Growing energy demand, global climate disruption and the prospect of a carbon-constrained world have opened the door for discussion of a potential nuclear renaissance. The fact that deployment of nuclear energy has not been fully embraced points to a number of challenges. These range from concerns about safety, security and proliferation of nuclear materials to questions of feasibiity and economics. Others cite the continuing quest for an acceptable approach to the management of long-lived wastes and uncertainty about risks to human health and the environment. Arguably public acceptance of nuclear energy will require policy makers to examine many social and ethical concerns, both real and perceived. Yet research suggests that public trust in governments and institutions is eroding while society's expectations to be involved in decision-making have become more intense and sophisticated. The recent Canadian experience of selecting an approach for the long-term management of used nuclear fuel illustrates the complexity of obtaining a ``social licence'' to proceed. A key objective was to gather and document the terms and conditions that would make such a project acceptable to society and to reflect a fundamental understanding and respect for these factors in the project's actual design and implementation. The underlying philosophy was that the analysis of scientific and technical evidence, while essential, could not be the sole determining factor. Ultimately it is society that will determine which risks it is prepared to accept. The mission of developing collaboratively with Canadians a management approach that would be socially acceptable, technically sound, environmentally responsible and economically feasible required the development of an integrated, systemic analytical framework and an interactive and transparent process of dialogue and deliberation. This investment in seeking diversity of perspectives resulted in the mergence of common ground among citizens and specialists. It defined the terms of a socio-scientific contract: safety, fairness and flexibility and taught us the importance of continuing to earn trust and confidence.

DOE Office of Scientific and Technical Information (OSTI.GOV)

French, Troy

Le Norman Energy Company conducted research on field application of alkaline-surfactant-polymer (ASP) flooding as a part of the U.S. Department of Energy's plan to maximize the production of our domestic oil resources. In addition to having substantial technical merit, the process uses chemicals that are environmentally acceptable. Le Norman's field project is located in the Sho-Vel-Tum (OK) oil field, which was a major producer of crude oil in past years, but has since been extensively waterflooded. This reservoir in this portion of the field is typical of many shallow reservoirs in the Oklahoma-Kansas area and is a good demonstration sitemore » for that area. The pay zones are located approximately 700 ft. deep, and this project is the shallowest field test for ASP flooding.« less

Fulbrights for Soviet Lectures

NASA Astrophysics Data System (ADS)

Packard, Craig

The Council for International Exchange of Scholars is still accepting applications for Fulbright awards to lecture in the sciences in the Soviet Union for academic year 1989-1990. Because the original deadline, September 15, has passed, applications will be processed immediately, and the 1989-1990 Fulbright Scholar Program Faculty Grants close when an adequate number of applicants is approved for nomination.Applications can be in the “Any Field” category or in the more specific categories sought by the Soviet Union, including geophysics at Tashkent; geology at the Gubkin Institute of Oil, Chemical, and Gas Industry; environmental sciences (cultivation of microalgae in sewage; continental shelf development, water resources protection, and economic aspects); and forest restoration technology. Awards are also available in chemistry, life sciences, and physics and astronomy.

76 FR 19829 - Clean Alternative Fuel Vehicle and Engine Conversions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

...EPA is streamlining the process by which manufacturers of clean alternative fuel conversion systems may demonstrate compliance with vehicle and engine emissions requirements. Specifically, EPA is revising the regulatory criteria for gaining an exemption from the Clean Air Act prohibition against tampering for the conversion of vehicles and engines to operate on a clean alternative fuel. This final rule creates additional compliance options beyond certification that protect manufacturers of clean alternative fuel conversion systems against a tampering violation, depending on the age of the vehicle or engine to be converted. The new options alleviate some economic and procedural impediments to clean alternative fuel conversions while maintaining environmental safeguards to ensure that acceptable emission levels from converted vehicles are sustained.

GO/NO-GO - When is medical hazard mitigation acceptable for launch?

NASA Technical Reports Server (NTRS)

Hamilton, Douglas R.; Polk, James D.

2005-01-01

Medical support of spaceflight missions is composed of complex tasks and decisions that dedicated to maintaining the health and performance of the crew and the completion of mission objectives. Spacecraft represent one of the most complex vehicles built by humans, and are built to very rigorous design specifications. In the course of a Flight Readiness Review (FRR) or a mission itself, the flight surgeon must be able to understand the impact of hazards and risks that may not be completely mitigated by design alone. Some hazards are not mitigated because they are never actually identified. When a hazard is identified, it must be reduced or waivered. Hazards that cannot be designed out of the vehicle or mission, are usually mitigated through other means to bring the residual risk to an acceptable level. This is possible in most engineered systems because failure modes are usually predictable and analysis can include taking these systems to failure. Medical support of space missions is complicated by the inability of flight surgeons to provide "exact" hazard and risk numbers to the NASA engineering community. Taking humans to failure is not an option. Furthermore, medical dogma is mostly comprised of "medical prevention" strategies that mitigate risk by examining the behaviour of a cohort of humans similar to astronauts. Unfortunately, this approach does not lend itself well for predicting the effect of a hazard in the unique environment of space. This presentation will discuss how Medical Operations uses an evidence-based approach to decide if hazard mitigation strategies are adequate to reduce mission risk to acceptable levels. Case studies to be discussed will include: 1. Risk of electrocution risk during EVA 2. Risk of cardiac event risk during long and short duration missions 3. Degraded cabin environmental monitoring on the ISS. Learning Objectives 1.) The audience will understand the challenges of mitigating medical risk caused by nominal and off-nominal mission events. 2.) The audience will understand the process by which medical hazards are identified and mitigated before launch. 3.) The audience will understand the roles and responsibilities of all the other flight control positions in participating in the process of reducing hazards and reducing medical risk to an acceptable level.

Next steps in the development of ecological soil clean-up values for metals.

PubMed

Wentsel, Randall; Fairbrother, Anne

2014-07-01

This special series in Integrated Environmental Assessment Management presents the results from 6 workgroups that were formed at the workshop on Ecological Soil Levels-Next Steps in the Development of Metal Clean-Up Values (17-21 September 2012, Sundance, Utah). This introductory article presents an overview of the issues assessors face when conducting risk assessments for metals in soils, key US Environmental Protection Agency (USEPA) documents on metals risk assessment, and discusses the importance of leveraging from recent major terrestrial research projects, primarily to address Registration, Evaluation, Authorization and Restriction of Chemical Substances (REACH) requirements in Europe, that have significantly advanced our understanding of the behavior and toxicity of metals in soils. These projects developed large data sets that are useful for the risk assessment of metals in soil environments. The workshop attendees met to work toward developing a process for establishing ecological soil clean-up values (Eco-SCVs). The goal of the workshop was to progress from ecological soil screening values (Eco-SSLs) to final clean-up values by providing regulators with the methods and processes to incorporate bioavailability, normalize toxicity thresholds, address food-web issues, and incorporate background concentrations. The REACH data sets were used by workshop participants as case studies in the development of the ecological standards for soils. The workshop attendees discussed scientific advancements in bioavailability, soil biota and wildlife case studies, soil processes, and food-chain modeling. In addition, one of the workgroups discussed the processes needed to frame the topics to gain regulatory acceptance as a directive or guidance by Canada, the USEPA, or the United States. © 2013 SETAC.

The role of physician characteristics in clinical trial acceptance: testing pathways of influence.

PubMed

Curbow, Barbara; Fogarty, Linda A; McDonnell, Karen A; Chill, Julia; Scott, Lisa Benz

2006-03-01

Eight videotaped vignettes were developed that assessed the effects of three physician-related experimental variables (in a 2 x 2 x 2 factorial design) on clinical trial (CT) knowledge, video knowledge, information processing, CT beliefs, affective evaluations (attitudes), and CT acceptance. It was hypothesized that the physician variables (community versus academic-based affiliation, enthusiastic versus neutral presentation of the trial, and new versus previous relationship with the patient) would serve as communication cues that would interrupt message processing, leading to lower knowledge gain but more positive beliefs, attitudes, and CT acceptance. A total of 262 women (161 survivors and 101 controls) participated in the study. The manipulated variables primarily influenced the intermediary variables of post-test CT beliefs and satisfaction with information rather than knowledge or information processing. Multiple regression results indicated that CT acceptance was associated with positive post-CT beliefs, a lower level of information processing, satisfaction with information, and control status. Based on these results, CT acceptance does not appear to be based on a rational decision-making model; this has implications for both the ethics of informed consent and research conceptual models.

76 FR 20071 - Environmental Impact Statement: Oakland and Genesee Counties, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... pavement rehabilitation projects, safety improvement projects, intersection operation projects, and... when the narrow boulevard was found to be equal from a traffic standpoint and acceptable from a design...

Vapor Hydrogen Peroxide Sterilization Certification

NASA Astrophysics Data System (ADS)

Chen, Fei; Chung, Shirley; Barengoltz, Jack

For interplanetary missions landing on a planet of potential biological interest, United States NASA planetary protection currently requires that the flight system must be assembled, tested and ultimately launched with the intent of minimizing the bioload taken to and deposited on the planet. Currently the only NASA approved microbial reduction method is dry heat sterilization process. However, with utilization of such elements as highly sophisticated electronics and sensors in modern spacecraft, this process presents significant materials challenges and is thus an undesirable bioburden reduction method to design engineers. The objective of this work is to introduce vapor hydrogen peroxide (VHP) as an alternative to dry heat microbial reduction to meet planetary protection requirements. The VHP sterilization technology is widely used by the medical industry, but high doses of VHP may degrade the performance of flight hardware, or compromise material compatibility. The goal of our study is determine the minimum VHP process conditions for PP acceptable microbial reduction levels. A series of experiments were conducted using Geobacillus stearothermophilus to determine VHP process parameters that provided significant reductions in spore viability while allowing survival of sufficient spores for statistically significant enumeration. In addition to the obvious process parameters -hydrogen peroxide concentration, number of pulses, and exposure duration -the investigation also considered the possible effect of environmental pa-rameters. Temperature, relative humidity, and material substrate effects on lethality were also studied. Based on the results, a most conservative D value was recommended. This recom-mended D value was also validated using VHP "hardy" strains that were isolated from clean-rooms and environmental populations collected from spacecraft relevant areas. The efficiency of VHP at ambient condition as well as VHP material compatibility will also be presented.

Acceptance procedures for dense-graded mixes

DOT National Transportation Integrated Search

2001-03-01

Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

Citric Acid Passivation of Stainless Steel

NASA Technical Reports Server (NTRS)

Yasensky, David; Reali, John; Larson, Chris; Carl, Chad

2009-01-01

Passivation is a process for cleaning and providing corrosion protection for stainless steel. Currently, on Kennedy Space Center (KSC), only parts passivated with nitric acid are acceptable for use. KSC disposes of approximately 125gal of concentrated nitric acid per year, and receives many parts from vendors who must also dispose of used nitric acid. Unfortunately, nitric acid presents health and environmental hazards. As a result, several recent industry studies have examined citric acid as an alternative. Implementing a citric acid-based passivation procedure would improve the health and environmental safety aspects of passivation process. However although there is a lack of published studies that conclusively prove citric acid is a technically sound passivation agent. In 2007, NASA's KSC Materials Advisory Working Group requested the evaluation of citric acid in place of nitric acid for passivation of parts at KSC. United Space Alliance Materials & Processes engineers have developed a three-phase test plan to evaluate citric acid as an alternative to nitric acid on three stainless steels commonly used at KSC: UNS S30400, S41000, and S17400. Phases 1 and 2 will produce an optimized citric acid treatment based on results from atmospheric exposure at NASA's Beach Corrosion Facility. Phase 3 will compare the optimized solution(s) with nitric acid treatments. If the results indicate that citric acid passivates as well or better than nitric acid, NASA intends to approve this method for parts used at the Kennedy Space Center.

Evaluation of a Novel Approach for Reducing Emissions of Pharmaceuticals to the Environment

NASA Astrophysics Data System (ADS)

Bean, Thomas G.; Bergstrom, Ed; Thomas-Oates, Jane; Wolff, Amy; Bartl, Peter; Eaton, Bob; Boxall, Alistair B. A.

2016-10-01

Increased interest over the levels of pharmaceuticals detected in the environment has led to the need for new approaches to manage their emissions. Inappropriate disposal of unused and waste medicines and release from manufacturing plants are believed to be important pathways for pharmaceuticals entering the environment. In situ treatment technologies, which can be used on-site in pharmacies, hospitals, clinics, and at manufacturing plants, might provide a solution. In this study we explored the use of Pyropure, a microscale combined pyrolysis and gasification in situ treatment system for destroying pharmaceutical wastes. This involved selecting 17 pharmaceuticals, including 14 of the most thermally stable compounds currently in use and three of high environmental concern to determine the technology's success in waste destruction. Treatment simulation studies were done on three different waste types and liquid, solid, and gaseous emissions from the process were analyzed for parent pharmaceutical and known active transformation products. Gaseous emissions were also analyzed for NOx, particulates, dioxins, furans, and metals. Results suggest that Pyropure is an effective treatment process for pharmaceutical wastes: over 99 % of each study pharmaceutical was destroyed by the system without known active transformation products being formed during the treatment process. Emissions of the other gaseous air pollutants were within acceptable levels. Future uptake of the system, or similar in situ treatment approaches, by clinics, pharmacists, and manufacturers could help to reduce the levels of pharmaceuticals in the environment and reduce the economic and environmental costs of current waste management practices.

Interim Basis for PCB Sampling and Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

BANNING, D.L.

2001-01-18

This document was developed as an interim basis for sampling and analysis of polychlorinated biphenyls (PCBs) and will be used until a formal data quality objective (DQO) document is prepared and approved. On August 31, 2000, the Framework Agreement for Management of Polychlorinated Biphenyls (PCBs) in Hanford Tank Waste was signed by the US. Department of Energy (DOE), the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) (Ecology et al. 2000). This agreement outlines the management of double shell tank (DST) waste as Toxic Substance Control Act (TSCA) PCB remediation waste based on a risk-based disposalmore » approval option per Title 40 of the Code of Federal Regulations 761.61 (c). The agreement calls for ''Quantification of PCBs in DSTs, single shell tanks (SSTs), and incoming waste to ensure that the vitrification plant and other ancillary facilities PCB waste acceptance limits and the requirements of the anticipated risk-based disposal approval are met.'' Waste samples will be analyzed for PCBs to satisfy this requirement. This document describes the DQO process undertaken to assure appropriate data will be collected to support management of PCBs and is presented in a DQO format. The DQO process was implemented in accordance with the U.S. Environmental Protection Agency EPA QAlG4, Guidance for the Data Quality Objectives Process (EPA 1994) and the Data Quality Objectives for Sampling and Analyses, HNF-IP-0842, Rev. 1 A, Vol. IV, Section 4.16 (Banning 1999).« less

Interim Basis for PCB Sampling and Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

BANNING, D.L.

2001-03-20

This document was developed as an interim basis for sampling and analysis of polychlorinated biphenyls (PCBs) and will be used until a formal data quality objective (DQO) document is prepared and approved. On August 31, 2000, the Framework Agreement for Management of Polychlorinated Biphenyls (PCBs) in Hanford Tank Waste was signed by the U.S. Department of Energy (DOE), the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) (Ecology et al. 2000). This agreement outlines the management of double shell tank (DST) waste as Toxic Substance Control Act (TSCA) PCB remediation waste based on a risk-based disposalmore » approval option per Title 40 of the Code of Federal Regulations 761.61 (c). The agreement calls for ''Quantification of PCBs in DSTs, single shell tanks (SSTs), and incoming waste to ensure that the vitrification plant and other ancillary facilities PCB waste acceptance limits and the requirements of the anticipated risk-based disposal approval are met.'' Waste samples will be analyzed for PCBs to satisfy this requirement. This document describes the DQO process undertaken to assure appropriate data will be collected to support management of PCBs and is presented in a DQO format. The DQO process was implemented in accordance with the U.S. Environmental Protection Agency EPA QA/G4, Guidance for the Data Quality Objectives Process (EPA 1994) and the Data Quality Objectives for Sampling and Analyses, HNF-IP-0842, Rev. 1A, Vol. IV, Section 4.16 (Banning 1999).« less

Stakeholder Participation in Freshwater Monitoring and Evaluation Programs: Applying Thresholds of Potential Concern within Environmental Flows

NASA Astrophysics Data System (ADS)

Conallin, John; McLoughlin, Craig A.; Campbell, Josh; Knight, Roger; Bright, Troy; Fisher, Ian

2018-03-01

The complex nature of freshwater systems provides challenges for incorporating evidence-based techniques into management. This paper investigates the potential of participatory evidence-based techniques to involve local stakeholders and make decisions based on different "knowledge" sources within adaptive management programs. It focuses on the application of thresholds of potential concern (TPC) within strategic adaptive management (SAM) for facilitating inclusive decision-making. The study is based on the case of the Edward-Wakool (E-W) "Fish and Flows" SAM project in the Murray-Darling River Basin, Australia. We demonstrate the application of TPCs for improving collaborative decision-making within the E-W, associated with environmental watering requirements, and other natural resource management programs such as fish stocking. The development of TPCs in the E-W fish and flows SAM project helped improve stakeholder involvement and understanding of the system, and also the effectiveness of the implemented management interventions. TPCs ultimately helped inform environmental flow management activities. The TPC process complemented monitoring that was already occurring in the system and provided a mechanism for linking formal and informal knowledge to form explicit and measurable endpoints from objectives. The TPC process faced challenges due to the perceived reduction in scientific rigor within initial TPC development and use. However, TPCs must remain tangible to managers and other stakeholders, in order to aid in the implementation of adaptive management. Once accepted by stakeholders, over time TPCs should be reviewed and refined in order to increase their scientific rigor, as new information is generated.

Environmental durability of graphite.

DOT National Transportation Integrated Search

2002-01-01

The increasing acceptance and incorporation of fiber-reinforced polymer matrix composites (PMCs) as engineering construction materials have led many to look to the infrastructure as an application for these versatile materials. One such system is pul...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

76 FR 27925 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... State Compatibility IX. Voluntary Consensus Standards X. Environmental Impact--Categorical Exclusion XI... endorsed guidance developed by the Nuclear Energy Institute (NEI) in NEI 08-01, ``Industry Guideline for...

Drivers of an urban community's acceptance of a large desalination scheme for drinking water

NASA Astrophysics Data System (ADS)

Gibson, Fiona L.; Tapsuwan, Sorada; Walker, Iain; Randrema, Elodie

2015-09-01

Changing climates and growing populations have prompted policy makers to shift to more climate resilient, technology-driven water sources, such as seawater desalination. Desalination is a prominent water resource in the Middle East but countries in other parts of the world with similar scarcity issues and good access to sea water, such as Australia, have been comparatively slow to adopt it. This paper explores attitudes to desalination in Perth, Western Australia, and the factors that influence its acceptance. We compared individuals' acceptance of desalination over two time periods by using identical surveys administered in 2007 and 2012. We then examined the attitudinal factors - attitudes towards desalination and attitudes towards the environment - that influence acceptance. Acceptance of desalination was reasonably high and stable at both times (74% and 73% in 2007 and 2012 respectively). We found that respondents' attitudes to perceived outcomes and benefits, fairness, environmental obligation and risk were important predictors of their acceptance of desalination in both surveys. However the weight given to these aspects varied over time. The findings show that there is still mixed community sentiment towards desalination, which helps to explain why acceptance has not increased since desalination was introduced in 2006.

Culture and the environment in Ghana

NASA Astrophysics Data System (ADS)

Dyasi, Hubert M.

1985-03-01

The traditional culture of Ghana stressed a strong relationship with the environment, and a culturally acceptable environmental management resulted from strictures and taboos related to the land. Following its independence in 1957, Ghana has enacted laws that reflect an enlightened environmental policy. These are especially important because of the difficulties Ghana has had in its economic development using Western technology that has damaged the fragile tropical ecosystem. A key aspect of Ghana's policy is the attempt to marry scientific knowledge and traditional beliefs for environmentally sound management of Ghana's resources.

Quality by design for herbal drugs: a feedforward control strategy and an approach to define the acceptable ranges of critical quality attributes.

PubMed

Yan, Binjun; Li, Yao; Guo, Zhengtai; Qu, Haibin

2014-01-01

The concept of quality by design (QbD) has been widely accepted and applied in the pharmaceutical manufacturing industry. There are still two key issues to be addressed in the implementation of QbD for herbal drugs. The first issue is the quality variation of herbal raw materials and the second issue is the difficulty in defining the acceptable ranges of critical quality attributes (CQAs). To propose a feedforward control strategy and a method for defining the acceptable ranges of CQAs for the two issues. In the case study of the ethanol precipitation process of Danshen (Radix Salvia miltiorrhiza) injection, regression models linking input material attributes and process parameters to CQAs were built first and an optimisation model for calculating the best process parameters according to the input materials was established. Then, the feasible material space was defined and the acceptable ranges of CQAs for the previous process were determined. In the case study, satisfactory regression models were built with cross-validated regression coefficients (Q(2) ) all above 91 %. The feedforward control strategy was applied successfully to compensate the quality variation of the input materials, which was able to control the CQAs in the 90-110 % ranges of the desired values. In addition, the feasible material space for the ethanol precipitation process was built successfully, which showed the acceptable ranges of the CQAs for the concentration process. The proposed methodology can help to promote the implementation of QbD for herbal drugs. Copyright © 2013 John Wiley & Sons, Ltd.

Accuracy, resolution, and cost comparisons between small format and mapping cameras for environmental mapping

NASA Technical Reports Server (NTRS)

Clegg, R. H.; Scherz, J. P.

1975-01-01

Successful aerial photography depends on aerial cameras providing acceptable photographs within cost restrictions of the job. For topographic mapping where ultimate accuracy is required only large format mapping cameras will suffice. For mapping environmental patterns of vegetation, soils, or water pollution, 9-inch cameras often exceed accuracy and cost requirements, and small formats may be better. In choosing the best camera for environmental mapping, relative capabilities and costs must be understood. This study compares resolution, photo interpretation potential, metric accuracy, and cost of 9-inch, 70mm, and 35mm cameras for obtaining simultaneous color and color infrared photography for environmental mapping purposes.

Cognitive and Emotion Regulation Change Processes in Cognitive Behavioural Therapy for Social Anxiety Disorder.

PubMed

O'Toole, Mia S; Mennin, Douglas S; Hougaard, Esben; Zachariae, Robert; Rosenberg, Nicole K

2015-01-01

The objective of the study was to investigate variables, derived from both cognitive and emotion regulation conceptualizations of social anxiety disorder (SAD), as possible change processes in cognitive behaviour therapy (CBT) for SAD. Several proposed change processes were investigated: estimated probability, estimated cost, safety behaviours, acceptance of emotions, cognitive reappraisal and expressive suppression. Participants were 50 patients with SAD, receiving a standard manualized CBT program, conducted in groups or individually. All variables were measured pre-therapy, mid-therapy and post-therapy. Lower level mediation models revealed that while a change in most process measures significantly predicted clinical improvement, only changes in estimated probability and cost and acceptance of emotions showed significant indirect effects of CBT for SAD. The results are in accordance with previous studies supporting the mediating role of changes in cognitive distortions in CBT for SAD. In addition, acceptance of emotions may also be a critical component to clinical improvement in SAD during CBT, although more research is needed on which elements of acceptance are most helpful for individuals with SAD. The study's lack of a control condition limits any conclusion regarding the specificity of the findings to CBT. Change in estimated probability and cost, and acceptance of emotions showed an indirect effect of CBT for SAD. Cognitive distortions appear relevant to target with cognitive restructuring techniques. Finding acceptance to have an indirect effect could be interpreted as support for contemporary CBT approaches that include acceptance-based strategies. Copyright © 2014 John Wiley & Sons, Ltd.

Cumulative impact assessment: A case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irving, J.S.; Bain, M.B.

The National Environmental Policy Act of 1969 (NEPA) indirectly addressed cumulative impacts. Attempts to include cumulative impacts in environmental impact assessments, however, did not began until the early 1980's. One such effort began when The Federal Energy and Regulatory Commission (FERC) received over 1200 applications for hydroelectric projects in the Pacific Northwest. Federal and State Agencies, Indian tribes and environmental groups realized the potential cumulative effect such development could have on fish and wildfire resources. In response, the FERC developed the Cluster Impact Assessment Procedure (CIAP). The CIAP consisted of public scoping meetings; interactive workshops designed to identify projects withmore » potential for cumulative effects, important resources, available data; and preparation of a NEPA document (EA or EIS). The procedure was modifies to assess the cumulative impacts of fifteen hydroelectric projects in the Salmon River Basin, Idaho. The methodology achieved its basic objective of evaluating the impact of hydroelectric development on fish and wildfire resources. In addition, the use of evaluative techniques to determine project interactions and degrees of impact hindered acceptance of the conclusions. Notwithstanding these problems, the studies provided a basis for decision-makers to incorporate the potential effects of cumulative impacts into the decision-making process. 22 refs., 2 figs., 4 tabs.« less

A Comparative Analysis of Life-Cycle Assessment Tools for ...

EPA Pesticide Factsheets

We identified and evaluated five life-cycle assessment tools that community decision makers can use to assess the environmental and economic impacts of end-of-life (EOL) materials management options. The tools evaluated in this report are waste reduction mode (WARM), municipal solid waste-decision support tool (MSW-DST), solid waste optimization life-cycle framework (SWOLF), environmental assessment system for environmental technologies (EASETECH), and waste and resources assessment for the environment (WRATE). WARM, MSW-DST, and SWOLF were developed for US-specific materials management strategies, while WRATE and EASETECH were developed for European-specific conditions. All of the tools (with the exception of WARM) allow specification of a wide variety of parameters (e.g., materials composition and energy mix) to a varying degree, thus allowing users to model specific EOL materials management methods even outside the geographical domain they are originally intended for. The flexibility to accept user-specified input for a large number of parameters increases the level of complexity and the skill set needed for using these tools. The tools were evaluated and compared based on a series of criteria, including general tool features, the scope of the analysis (e.g., materials and processes included), and the impact categories analyzed (e.g., climate change, acidification). A series of scenarios representing materials management problems currently relevant to c

The impact of incinerators on human health and environment.

PubMed

Sharma, Raman; Sharma, Meenakshi; Sharma, Ratika; Sharma, Vivek

2013-01-01

Of the total wastes generated by health-care organizations, 10%-25% are biomedical wastes, which are hazardous to humans and the environment and requires specific treatment and management. For decades, incineration was the method of choice for the treatment of such infectious wastes. Incinerator releases a wide variety of pollutants depending on the composition of the waste, which leads to health deterioration and environmental degradation. The significant pollutants emitted are particulate matter, metals, acid gases, oxides of nitrogen, and sulfur, aside from the release of innumerable substances of unknown toxicity. This process of waste incineration poses a significant threat to public health and the environment. The major impact on health is the higher incidence of cancer and respiratory symptoms; other potential effects are congenital abnormalities, hormonal defects, and increase in sex ratio. The effect on the environmental is in the form of global warming, acidification, photochemical ozone or smog formation, eutrophication, and human and animal toxicity. Thus, there is a need to skip to newer, widely accepted, economical, and environment-friendly technologies. The use of hydroclaves and plasma pyrolysis for the incineration of biomedical wastes leads to lesser environmental degradation, negligible health impacts, safe handling of treated wastes, lesser running and maintenance costs, more effective reduction of microorganisms, and safer disposal.

Persian adaptation of a questionnaire of environmental risk factors in multiple sclerosis (EnvIMS-Q).

PubMed

Sahraian, Mohammad Ali; Naghshineh, Hoda; Shati, Mohsen; Jahromi, Soodeh Razeghi; Rezaei, Niloofar

2016-11-01

It seems that gene-environment interaction play most important role in Multiple Sclerosis development. Increasing the incidence and prevalence of MS during the recent decades in the low prevalence area such as Iran is explained better by environment factors. Environmental Risk Factors in Multiple Sclerosis (the 'EnvIMS-Q') is a 6-page self-administered questionnaire for case control studies. the objectives of study are validation and adaptation of the EnvIMS-Q' then development of a Persian version for case control studies in Persian population. This questionnaire translated literally and in culturally relevant form, then content validation process was done by three groups' experts. According to giving rating to each item, each section and the whole instrument, we calculated their content validation indexes and also added some new questions and a new section to EnvIMS-Q. Finally, we analyzed repeatability of the answers within a 4 weeks interval. Relevancy and clarity indexes of all items were more than 80%. Scale relevancy index equaled 99% and scale clarity index equaled 97%. Repeatability of most items was acceptable. the use of standardized validated questionnaires will assist the researchers to perform local studies on the role of environmental factors on the basis of reliable data. Copyright © 2016 Elsevier B.V. All rights reserved.

Investigations of the environmental acceptability of fluorocarbon alternatives to chlorofluorocarbons.

PubMed Central

McFarland, M

1992-01-01

Chlorofluorocarbons (CFCs) are currently used in systems for preservation of perishable foods and medical supplies, increasing worker productivity and consumer comfort, conserving energy and increasing product reliability. As use of CFCs is phased out due to concerns of ozone depletion, a variety of new chemicals and technologies will be needed to serve these needs. In choosing alternatives, industry must balance concerns over safety and environmental acceptability and still meet the preformance characteristics of the current technology, the only viable alternatives meeting the safety, performance, and environmental requirements for the remaining 40% of demand are fluorocarbons, hydrochlorofluorocarbons (HCFs), and hydrofluorocarbons (HFCs). HCFCs and HFCs possess many of the desirable properties of the CFCs, but because of the, hydrogen, they results in shorter atmospheric lifetimes compared to CFCs and reduces their potential to contribute to stratospheric ozone depletion or global warming; HFCs do not contain chlorine and have no potential to destroy ozone. This paper provides an overview of challenges faced by industry, regulators, and society in general in continuing to meet societal needs and consumer demands while reducing risk to the enviroment without compromising consumer or worker safety. PMID:11607257

Dynamic analysis of a photovoltaic power system with battery storage capability

NASA Technical Reports Server (NTRS)

Merrill, W. C.; Blaha, R. J.; Pickrell, R. L.

1979-01-01

A photovolataic power system with a battery storage capability is analyzed. A dual battery current control concept is proposed, which enables the battery to either supply or accept power depending upon system environment and load conditions. A simulation of the power system, including the battery current control, is developed and evaluated. The evaulation demonstrate the visbility of the battery control concept of switch the battery from a charge to discharge mode and back as required by load and environmental conditions. An acceptable system operation is demonstrated over the entire insolation range. Additionally, system sensitivity, bandwidth, and damping characteristics of the battery control are shown to be acceptable for a projected hardware implementation.

Approaches to acceptable risk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whipple, C

Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, inmore » a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.« less

Thyme oil vapour and modified atmosphere packaging reduce anthracnose incidence and maintain fruit quality in avocado.

PubMed

Sellamuthu, Periyar Selvam; Mafune, Mpho; Sivakumar, Dharini; Soundy, Puffy

2013-09-01

Postharvest application of prochloraz fungicide is commercially practiced to control anthracnose, a postharvest disease in avocado. Increasing consumer concern regarding food safety and demand for organically produced fruits make it necessary to search for natural environmentally friendly alternative products and processes for the fruit industry. A combination of modified atmosphere packaging (MAP; ∼8% CO₂, 2% O₂) plus thyme oil (TO) was evaluated on the incidence and severity of anthracnose, physiological disorders (grey pulp, vascular browning), fruit quality parameters (L*, h°, firmness, weight loss) and sensory parameters (taste, texture, flavour and overall acceptance), phenylalanine ammonia-lyase (PAL) enzyme activity, total phenolic compounds, flavonoid contents and antioxidant activity in avocados ('Fuerte' and 'Hass' cultivars) held at 10 °C cold storage for 18 days and thereafter, ripened at 25 °C for 5-10 days. Stand-alone MAP, commercial treatment (prochloraz 0.05%) and untreated (control) fruit were included for comparison. MAP + TO treatment significantly (P < 0.05) reduced the incidence and severity of anthracnose, grey pulp, vascular browning, weight loss and loss of fruit firmness, and showed acceptable taste, flavour, texture and higher overall acceptance, increased PAL activity, total phenolic compounds, flavonoid contents and antioxidant activity, after ripening at 25 °C followed by cold storage at 10 °C. This investigation recommends MAP + TO combination treatment as a suitable alternative to the currently adopted prochloraz application. © 2013 Society of Chemical Industry.

Acceptance procedures for dense-graded mixes : literature review.

DOT National Transportation Integrated Search

2001-03-01

Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

DEPOT: A Database of Environmental Parameters, Organizations and Tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARSON,SUSAN D.; HUNTER,REGINA LEE; MALCZYNSKI,LEONARD A.

2000-12-19

The Database of Environmental Parameters, Organizations, and Tools (DEPOT) has been developed by the Department of Energy (DOE) as a central warehouse for access to data essential for environmental risk assessment analyses. Initial efforts have concentrated on groundwater and vadose zone transport data and bioaccumulation factors. DEPOT seeks to provide a source of referenced data that, wherever possible, includes the level of uncertainty associated with these parameters. Based on the amount of data available for a particular parameter, uncertainty is expressed as a standard deviation or a distribution function. DEPOT also provides DOE site-specific performance assessment data, pathway-specific transport data,more » and links to environmental regulations, disposal site waste acceptance criteria, other environmental parameter databases, and environmental risk assessment models.« less

Sterilizable syringes: excessive risk or cost-effective option?

PubMed Central

Battersby, A.; Feilden, R.; Nelson, C.

1999-01-01

In recent years, many poorer countries have chosen to use disposable instead of sterilizable syringes. Unfortunately, the infrastructure and management systems that are vital if disposables are to be used safely do not exist. WHO estimates that up to 30% of injections administered are unsafe. The traditional sterilizable syringe had many disadvantages, some of which have been minimized through better design and the use of modern materials; others have been overcome because staff are able to demonstrate that they have performed safely. For example, the time-steam saturation-temperature (TST) indicator has enabled staff to demonstrate that a sterilizing cycle has been successfully completed. Health facility staff must be able to sterilize equipment, and the sterilizable syringe remains the least costly means of administering an injection. Data from countries that have acceptable systems for processing clinical waste indicate that safe and environmentally acceptable disposal, destruction and final containment cost nearly as much as the original cost of a disposable syringe. By careful supervision of staff behaviour and good management, some countries have demonstrated that they are able to administer safe injections with sterilizable syringes at a price they can afford. PMID:10593029