THE RAPID OPTICAL TOOL (TM) LASER-INDUCED FLUORESCENCE SYSTEM FOR SCREENING OF PETROLEUM HYDROCARBONS IN SUBSURFACE SOILS

EPA Science Inventory

The Consortium for Site Characterization Technology (CSCT) has established a formal program to accelerate acceptance and application of innovative monitoring and site characterization technologies that improve the way the nation manages its environmental problems. In 1995 the CS...

45 CFR 96.136 - Independent peer review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology, resources, and patient/client circumstances, will meet accepted standards and practices which... approach to addictions treatment, and must be sensitive to the cultural and environmental issues that may...

Industry-Cost-Curve Approach for Modeling the Environmental Impact of Introducing New Technologies in Life Cycle Assessment.

PubMed

Kätelhön, Arne; von der Assen, Niklas; Suh, Sangwon; Jung, Johannes; Bardow, André

2015-07-07

The environmental costs and benefits of introducing a new technology depend not only on the technology itself, but also on the responses of the market where substitution or displacement of competing technologies may occur. An internationally accepted method taking both technological and market-mediated effects into account, however, is still lacking in life cycle assessment (LCA). For the introduction of a new technology, we here present a new approach for modeling the environmental impacts within the framework of LCA. Our approach is motivated by consequential life cycle assessment (CLCA) and aims to contribute to the discussion on how to operationalize consequential thinking in LCA practice. In our approach, we focus on new technologies producing homogeneous products such as chemicals or raw materials. We employ the industry cost-curve (ICC) for modeling market-mediated effects. Thereby, we can determine substitution effects at a level of granularity sufficient to distinguish between competing technologies. In our approach, a new technology alters the ICC potentially replacing the highest-cost producer(s). The technologies that remain competitive after the new technology's introduction determine the new environmental impact profile of the product. We apply our approach in a case study on a new technology for chlor-alkali electrolysis to be introduced in Germany.

Technology sensitivity studies for a Mach 3.0 civil transport

NASA Technical Reports Server (NTRS)

Coen, Peter G.

1988-01-01

The level of technological sophistication required for the economic viability and environmental acceptability of a Mach 3.0-cruise SST is evaluated, with a view to the development schedule and initial operating date into which the maturity of various essential technologies will translate. Attention is given to the effect of advanced aerodynamic, propulsion, structural and subsystem technologies on takeoff gross weight. A dramatic impact is noted to result from the combination of prospective technological advances in flow laminarization, advanced structures and materials, etc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The U.S. Department of Energy’s Bioenergy Technologies Office (BETO) is committed to developing the resources, technologies, and systems needed to support a thriving bioenergy industry that protects natural resources and ad- vances environmental, economic, and social benefits. BETO’s Sustainability Technology Area proactively identifies and addresses issues that affect the scale-up potential, public acceptance, and long-term viability of advanced bioenergy systems; as a result, the area is critical to achieving BETO’s overall goals.

Investigations of the environmental acceptability of fluorocarbon alternatives to chlorofluorocarbons.

PubMed Central

McFarland, M

1992-01-01

Chlorofluorocarbons (CFCs) are currently used in systems for preservation of perishable foods and medical supplies, increasing worker productivity and consumer comfort, conserving energy and increasing product reliability. As use of CFCs is phased out due to concerns of ozone depletion, a variety of new chemicals and technologies will be needed to serve these needs. In choosing alternatives, industry must balance concerns over safety and environmental acceptability and still meet the preformance characteristics of the current technology, the only viable alternatives meeting the safety, performance, and environmental requirements for the remaining 40% of demand are fluorocarbons, hydrochlorofluorocarbons (HCFs), and hydrofluorocarbons (HFCs). HCFCs and HFCs possess many of the desirable properties of the CFCs, but because of the, hydrogen, they results in shorter atmospheric lifetimes compared to CFCs and reduces their potential to contribute to stratospheric ozone depletion or global warming; HFCs do not contain chlorine and have no potential to destroy ozone. This paper provides an overview of challenges faced by industry, regulators, and society in general in continuing to meet societal needs and consumer demands while reducing risk to the enviroment without compromising consumer or worker safety. PMID:11607257

A Policy of Options

ERIC Educational Resources Information Center

Fri, Robert W.

1975-01-01

The Energy Research and Development Administration's program to deal with the relationship of energy and the environment is examined. Alternatives include the development of new energy sources that offer a viable choice for the future for economically feasible and environmentally acceptable technologies. (BT)

PROTOCOL FOR VERIFICATION OF URBAN RUNOFF MODELS

EPA Science Inventory

The ETV program was created by the USEPA to accelerate the marketplace acceptance of commercial-ready environmental technologies. This objective will be achieved by conducting credible third-party performance assessments and reporting the results. Access to this data allows users...

Assessing the utility of TAM, TPB, and UTAUT for advanced driver assistance systems.

PubMed

Rahman, Md Mahmudur; Lesch, Mary F; Horrey, William J; Strawderman, Lesley

2017-11-01

Advanced Driver Assistance Systems (ADAS) are intended to enhance driver performance and improve transportation safety. The potential benefits of these technologies, such as reduction in number of crashes, enhancing driver comfort or convenience, decreasing environmental impact, etc., have been acknowledged by transportation safety researchers and federal transportation agencies. Although these systems afford safety advantages, they may also challenge the traditional role of drivers in operating vehicles. Driver acceptance, therefore, is essential for the implementation of these systems into the transportation system. Recognizing the need for research into the factors affecting driver acceptance, this study assessed the utility of the Technology Acceptance Model (TAM), the Theory of Planned Behavior (TPB), and the Unified Theory of Acceptance and Use of Technology (UTAUT) for modelling driver acceptance in terms of Behavioral Intention to use an ADAS. Each of these models propose a set of factors that influence acceptance of a technology. Data collection was done using two approaches: a driving simulator approach and an online survey approach. In both approaches, participants interacted with either a fatigue monitoring system or an adaptive cruise control system combined with a lane-keeping system. Based on their experience, participants responded to several survey questions to indicate their attitude toward using the ADAS and their perception of its usefulness, usability, etc. A sample of 430 surveys were collected for this study. Results found that all the models (TAM, TPB, and UTAUT) can explain driver acceptance with their proposed sets of factors, each explaining 71% or more of the variability in Behavioral Intention. Among the models, TAM was found to perform the best in modelling driver acceptance followed by TPB. The findings of this study confirm that these models can be applied to ADAS technologies and that they provide a basis for understanding driver acceptance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Personalized Exposure Assessment: Promising Approaches for Human Environmental Health Research

PubMed Central

Weis, Brenda K.; Balshaw, David; Barr, John R.; Brown, David; Ellisman, Mark; Lioy, Paul; Omenn, Gilbert; Potter, John D.; Smith, Martyn T.; Sohn, Lydia; Suk, William A.; Sumner, Susan; Swenberg, James; Walt, David R.; Watkins, Simon; Thompson, Claudia; Wilson, Samuel H.

2005-01-01

New technologies and methods for assessing human exposure to chemicals, dietary and lifestyle factors, infectious agents, and other stressors provide an opportunity to extend the range of human health investigations and advance our understanding of the relationship between environmental exposure and disease. An ad hoc Committee on Environmental Exposure Technology Development was convened to identify new technologies and methods for deriving personalized exposure measurements for application to environmental health studies. The committee identified a “toolbox” of methods for measuring external (environmental) and internal (biologic) exposure and assessing human behaviors that influence the likelihood of exposure to environmental agents. The methods use environmental sensors, geographic information systems, biologic sensors, toxicogenomics, and body burden (biologic) measurements. We discuss each of the methods in relation to current use in human health research; specific gaps in the development, validation, and application of the methods are highlighted. We also present a conceptual framework for moving these technologies into use and acceptance by the scientific community. The framework focuses on understanding complex human diseases using an integrated approach to exposure assessment to define particular exposure–disease relationships and the interaction of genetic and environmental factors in disease occurrence. Improved methods for exposure assessment will result in better means of monitoring and targeting intervention and prevention programs. PMID:16002370

The accelerated site technology deployment program presents the segmented gate system

DOE Office of Scientific and Technical Information (OSTI.GOV)

PATTESON,RAYMOND; MAYNOR,DOUG; CALLAN,CONNIE

2000-02-24

The Department of Energy (DOE) is working to accelerate the acceptance and application of innovative technologies that improve the way the nation manages its environmental remediation problems. The DOE Office of Science and Technology established the Accelerated Site Technology Deployment Program (ASTD) to help accelerate the acceptance and implementation of new and innovative soil and ground water remediation technologies. Coordinated by the Department of Energy's Idaho Office, the ASTD Program reduces many of the classic barriers to the deployment of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. The papermore » uses the example of the Segmented Gate System (SGS) to illustrate how the ASTD program works. The SGS was used to cost effectively separate clean and contaminated soil for four different radionuclides: plutonium, uranium, thorium, and cesium. Based on those results, it has been proposed to use the SGS at seven other DOE sites across the country.« less

Thoughts on "Virtual Education." Virtual Reality vs. Real Experience: Critical Thinking and Outdoor Education. Technology and the Influence of American Culture.

ERIC Educational Resources Information Center

Schatz, Curt; Schaefer, Susan

1997-01-01

A finding that environmental educators are eager to accept Virtual Reality (VR) as a teaching tool prompts two responses: one claims that students cannot critically analyze VR information to determine what is relevant because the VR programmer has already done that; the other points out that corporate propaganda taints the technology and that…

Environmental Remediation Activities in Japan Following the Fukushima Dai-ichi Reactor Incident - 12603

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lively, J.W.; Kelley, J.L.; Marcial, M.R.

2012-07-01

In March 2011, the Fukushima Dai-ichi reactor power plant was crippled by the Great Pacific earthquake and subsequent tsunami. Much of the focus in the news was on the reactor site itself as the utility company (TEPCO), the Japanese government, and experts from around the world worked to bring the damaged plants into a safe shutdown condition and stem the release of radioactivity to the environment. Most of the radioactivity released was carried out to sea with the prevailing winds. Still, as weather patterns changed and winds shifted, a significant plume of radioactive materials released from the plant deposited inmore » the environment surrounding the plant, contaminating large land areas of the Fukushima Prefecture. The magnitude of the radiological impact to the surrounding environmental is so large that the Japanese government has had to reevaluate the meaning of 'acceptably clean'. In many respects, 'acceptably clean' cannot be a one-size-fits-all standard. The economics costs of such an approach would make impossible what is already an enormous and costly environmental response and remediation task. Thus, the Japanese government has embarked upon an approach that is both situation-specific and reasonably achievable. For example, the determination of acceptably clean for a nursery school or kindergarten play yard may be different from that for a parking lot. The acceptably clean level of residual radioactivity in the surface soil of a rice paddy is different from that in a forested area. The recognized exposure situation (scenario) thus plays a large role in the decision process. While sometimes complicated to grasp or implement, such an approach does prioritize national resources to address environment remediation based upon immediate and significant risks. In addition, the Japanese government is testing means and methods, including advanced or promising technologies, that could be proven to be effective in reducing the amount of radioactivity in the environment beyond a fixed, concentration based limit. Essentially, the definition of acceptably clean includes the concept of reasonably achievable, given the available technology, means and methods, and the cost to implement such. The Japanese government recently issued three technology demonstration contracts expressly designed to test and evaluate the available technologies, means, and methods, which, if implemented, might produce the greatest risk reduction from environmental contamination for the best value. One of the Japanese contract holders, Obayashi JV, has teamed with AMEC to demonstrate the applicability and capabilities of the Orion ScanPlot{sup SM} and ScanSort{sup SM} technologies in radiologically impacted towns both inside and immediately outside the 20 km restricted zone. This presentation provides some unique images and informative insight into the environmental radioactive impacts in and around the exclusion zone. It will provide a look at one element of the Japanese government?s efforts to achieve the greatest risk reduction that is reasonably achievable. The Orion ScanPlot{sup SM} and ScanSort{sup SM} are being used with success on the Japan Town Demonstration Project to assess pre-remedial action contamination levels, document the post-remedial action contamination levels and to precisely measure and segregate excavated soils based on their radioactive content and the prescribed segregation limits (DCS). Initial results suggest that these technologies could provide capabilities to the remedial action efforts that would result in considerable improvements in field data certainty and compliance with remedial objectives while reducing overall costs. (authors)« less

Designer carbon nanotubes for contaminant removal in water and wastewater: A critical review.

PubMed

Sarkar, Binoy; Mandal, Sanchita; Tsang, Yiu Fai; Kumar, Pawan; Kim, Ki-Hyun; Ok, Yong Sik

2018-01-15

The search for effective materials for environmental cleanup is a scientific and technological issue of paramount importance. Among various materials, carbon nanotubes (CNTs) possess unique physicochemical, electrical, and mechanical properties that make them suitable for potential applications as environmental adsorbents, sensors, membranes, and catalysts. Depending on the intended application and the chemical nature of the target contaminants, CNTs can be designed through specific functionalization or modification processes. Designer CNTs can remarkably enhance contaminant removal efficiency and facilitate nanomaterial recovery and regeneration. An increasing number of CNT-based materials have been used to treat diverse organic, inorganic, and biological contaminants. These success stories demonstrate their strong potential in practical applications, including wastewater purification and desalination. However, CNT-based technologies have not been broadly accepted for commercial use due to their prohibitive cost and the complex interactions of CNTs with other abiotic and biotic environmental components. This paper presents a critical review of the existing literature on the interaction of various contaminants with CNTs in water and soil environments. The preparation methods of various designer CNTs (surface functionalized and/or modified) and the functional relationships between their physicochemical characteristics and environmental uses are discussed. This review will also help to identify the research gaps that must be addressed for enhancing the commercial acceptance of CNTs in the environmental remediation industry. Copyright © 2017 Elsevier B.V. All rights reserved.

Consumer acceptance of cultured meat: A systematic review.

PubMed

Bryant, Christopher; Barnett, Julie

2018-09-01

Cultured meat grown in-vitro from animal cells is being developed as a way of addressing many of the ethical and environmental concerns associated with conventional meat production. As commercialisation of this technology appears increasingly feasible, there is growing interest in the research on consumer acceptance of cultured meat. We present a systematic review of the peer-reviewed literature, and synthesize and analyse the findings of 14 empirical studies. We highlight demographic variations in consumer acceptance, factors influencing acceptance, common consumer objections, perceived benefits, and areas of uncertainty. We conclude by evaluating the most important objections and benefits to consumers, as well as highlighting areas for future research. Copyright © 2018 Elsevier Ltd. All rights reserved.

The role of productivity in improving the environmental sustainability of ruminant production systems.

PubMed

Capper, Judith L; Bauman, Dale E

2013-01-01

The global livestock industry is charged with providing sufficient animal source foods to supply the global population while improving the environmental sustainability of animal production. Improved productivity within dairy and beef systems has demonstrably reduced resource use and greenhouse gas emissions per unit of food over the past century through the dilution of maintenance effect. Further environmental mitigation effects have been gained through the current use of technologies and practices that enhance milk yield or growth in ruminants; however, the social acceptability of continued intensification and use of productivity-enhancing technologies is subject to debate. As the environmental impact of food production continues to be a significant issue for all stakeholders within the field, further research is needed to ensure that comparisons among foods are made based on both environmental impact and nutritive value to truly assess the sustainability of ruminant products.

Low NO/x/ heavy fuel combustor program

NASA Technical Reports Server (NTRS)

Lister, E.; Niedzwiecki, R. W.; Nichols, L.

1980-01-01

The paper deals with the 'Low NO/x/ Heavy Fuel Combustor Program'. Main program objectives are to generate and demonstrate the technology required to develop durable gas turbine combustors for utility and industrial applications, which are capable of sustained, environmentally acceptable operation with minimally processed petroleum residual fuels. The program will focus on 'dry' reductions of oxides of nitrogen (NO/x/), improved combustor durability and satisfactory combustion of minimally processed petroleum residual fuels. Other technology advancements sought include: fuel flexibility for operation with petroleum distillates, blends of petroleum distillates and residual fuels, and synfuels (fuel oils derived from coal or shale); acceptable exhaust emissions of carbon monoxide, unburned hydrocarbons, sulfur oxides and smoke; and retrofit capability to existing engines.

Low NO(x) heavy fuel combustor program

NASA Technical Reports Server (NTRS)

Lister, E.; Niedzwiecki, R. W.; Nichols, L.

1979-01-01

The 'low nitrogen oxides heavy fuel combustor' program is described. Main program objectives are to generate and demonstrate the technology required to develop durable gas turbine combustors for utility and industrial applications, which are capable of sustained, environmentally acceptable operation with minimally processed petroleum residual fuels. The program will focus on 'dry' reductions of oxides of nitrogen, improved combustor durability, and satisfactory combustion of minimally processed petroleum residual fuels. Other technology advancements sought include: fuel flexibility for operation with petroleum distillates, blends of petroleum distillates and residual fuels, and synfuels (fuel oils derived from coal or shale); acceptable exhaust emissions of carbon monoxide, unburned hydrocarbons, sulfur oxides and smoke; and retrofit capability to existing engines.

Environment-friendly drilling operation technology

NASA Astrophysics Data System (ADS)

Luo, Huaidong; Jing, Ning; Zhang, Yanna; Huang, Hongjun; Wei, Jun

2017-01-01

Under the circumstance that international safety and environmental standards being more and more stringent, drilling engineering is facing unprecedented challenges, the extensive traditional process flow is no longer accepted, the new safe and environment-friendly process is more suitable to the healthy development of the industry. In 2015, CNPCIC adopted environment-friendly drilling technology for the first time in the Chad region, ensured the safety of well control, at the same time increased the environmental protection measure, reduced the risk of environmental pollution what obtain the ratification from local government. This technology carries out recovery and disposal of crude oil, cuttings and mud without falling on the ground. The final products are used in road and well site construction, which realizes the reutilization of drilling waste, reduces the operating cost, and provides a strong technical support for cost-cutting and performance-increase of drilling engineering under low oil price.

MOBILITY AND DEGRADATION OF RESIDUES AT HAZARDOUS WASTE LAND TREATMENT SITES AT CLOSURE

EPA Science Inventory

Soil treatment systems that are designed and managed based on a knowledge of soil-waste interactions may represent a significant technology for simultaneous treatment and ultimate disposal of selected hazardous wastes in an environmentally acceptable manner. hese soil treatment s...

Activated carbon, biochar and charcoal: Linkages and synergies across pyrogenic carbon's ABC

USDA-ARS?s Scientific Manuscript database

Biochar and activated carbon, both carbonaceous pyrogenic materials, are important products for environmental technology and intensively studied for a multitude of purposes. A strict distinction between these materials is not always possible, and also a generally accepted terminology is lacking. How...

Data and monitoring needs for a more ecological agriculture

NASA Astrophysics Data System (ADS)

Zaks, David P. M.; Kucharik, Christopher J.

2011-01-01

Information on the life-cycle environmental impacts of agricultural production is often limited. As demands grow for increasing agricultural output while reducing its negative environmental impacts, both existing and novel data sources can be leveraged to provide more information to producers, consumers, scientists and policy makers. We review the components and organization of an agroecological sensor web that integrates remote sensing technologies and in situ sensors with models in order to provide decision makers with effective management options at useful spatial and temporal scales for making more informed decisions about agricultural productivity while reducing environmental burdens. Several components of the system are already in place, but by increasing the extent and accessibility of information, decision makers will have the opportunity to enhance food security and environmental quality. Potential roadblocks to implementation include farmer acceptance, data transparency and technology deployment.

Possible environmental effects of increased coal use in California

NASA Technical Reports Server (NTRS)

Carey, D. L.

1978-01-01

If coal is to be utilized in California it must be made compatible with the state's drive toward restoring environmental quality. The impacts resulting from coal's mining and transportation, or from water consumption, water quality degradation and electric transmission line routing can probably be adequately mitigated through strong and early planning efforts, the use of improved control and process technologies, and sincere utility commitment. The socioeconomic impacts may prove somewhat more difficult to satisfactorily mitigate. Of greatest concern is adequate control of generated air pollutants and disposal of solid and liquid wastes since acceptable technologies or handling techniques have yet to be conclusively demonstrated.

Landfill alternative offers powerful case.

PubMed

Baillie, Jonathan

2011-04-01

With many of Europe's landfill sites now close to capacity, and the EU Landfill Directive requiring that, by 2020, the amount of waste sent to landfill should be just 35% of the volume similarly disposed of in 1995, pressure is mounting to find environmentally acceptable waste disposal alternatives. At a recent IHEEM waste seminar, Gary Connelly, a technical consultant at environmental technology consultancy the Cameron Corporation, described a technology which he explained can effectively convert 85% of the European Waste Catalogue of materials into an inert residue, is "cleaner and cheaper" than incineration, and can generate both electricity an waste heat. As HEJ editor Jonathan Baillie reports, a key target market is healthcare facilities.

CPICOR{trademark}: Clean power from integrated coal-ore reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wintrell, R.; Miller, R.N.; Harbison, E.J.

1997-12-31

The US steel industry, in order to maintain its basic iron production, is thus moving to lower coke requirements and to the cokeless or direct production of iron. The US Department of Energy (DOE), in its Clean Coal Technology programs, has encouraged the move to new coal-based technology. The steel industry, in its search for alternative direct iron processes, has been limited to a single process, COREX{reg_sign}. The COREX{reg_sign} process, though offering commercial and environmental acceptance, produces a copious volume of offgas which must be effectively utilized to ensure an economical process. This volume, which normally exceeds the internal needsmore » of a single steel company, offers a highly acceptable fuel for power generation. The utility companies seeking to offset future natural gas cost increases are interested in this clean fuel. The COREX{reg_sign} smelting process, when integrated with a combined cycle power generation facility (CCPG) and a cryogenic air separation unit (ASU), is an outstanding example of a new generation of environmentally compatible and highly energy efficient Clean Coal Technologies. This combination of highly integrated electric power and hot metal coproduction, has been designated CPICOR{trademark}, Clean Power from Integrated Coal/Ore Reduction.« less

Culture and the environment in Ghana

NASA Astrophysics Data System (ADS)

Dyasi, Hubert M.

1985-03-01

The traditional culture of Ghana stressed a strong relationship with the environment, and a culturally acceptable environmental management resulted from strictures and taboos related to the land. Following its independence in 1957, Ghana has enacted laws that reflect an enlightened environmental policy. These are especially important because of the difficulties Ghana has had in its economic development using Western technology that has damaged the fragile tropical ecosystem. A key aspect of Ghana's policy is the attempt to marry scientific knowledge and traditional beliefs for environmentally sound management of Ghana's resources.

SUPERFUND INNOVATIVE TECHNOLOGIES EVALUATION ...

EPA Pesticide Factsheets

This task seeks to identify high priority needs of the Regions and Program Offices for innovative field sampling, characterization, monitoring, and measurement technologies. When an appropriate solution to a specific problem is identified, a field demonstration is conducted to document the performance and cost of the proposed technologies. The use of field analysis almost always provides a savings in time and cost over the usual sample and ship to a conventional laboratory for analysis approach to site characterization and monitoring. With improvements in technology and appropriate quality assurance/quality control, field analysis has been shown to provide high quality data, useful for most environmental monitoring or characterization projects. An emphasis of the program is to seek out innovative solutions to existing problems and to provide the cost and performance data a user would require to make an informed decision regarding the adequacy of a technology to address a specific environmental problem. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Precision Farming and Precision Pest Management: The Power of New Crop Production Technologies

PubMed Central

Strickland, R. Mack; Ess, Daniel R.; Parsons, Samuel D.

1998-01-01

The use of new technologies including Geographic Information Systems (GIS), the Global Positioning System (GPS), Variable Rate Technology (VRT), and Remote Sensing (RS) is gaining acceptance in the present high-technology, precision agricultural industry. GIS provides the ability to link multiple data values for the same geo-referenced location, and provides the user with a graphical visualization of such data. When GIS is coupled with GPS and RS, management decisions can be applied in a more precise "micro-managed" manner by using VRT techniques. Such technology holds the potential to reduce agricultural crop production costs as well as crop and environmental damage. PMID:19274236

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bishop, J.

Every environmentalist and environmental manager dreams of a day when it will be possible to load hazardous waste into one end of a magic machine and retrieve beneficial -- or at least benign -- products from the other end. Two unrelated companies -- Molten Metal Technology Inc., (Waltham, Mass.) and ELI Eco Logic Inc. (Rockwood, Ontario, Canada) -- have developed different technologies that show promise of realizing such dreams. Whether either company`s solution to the problem of effectively managing hazardous wastes proves to be the dream machine remains to be seen, but their stories offer insight into what the futuremore » may hold for hazardous waste management. The Eco Logic Process was demonstrated in 1991 at Hamilton Harbour, Ontario, and later at Bay City, Mich., in cleanups of polychlorinated biphenyls (PCBs) and other soil contaminants. The technology was accepted into the US Environmental Protection Agency`s Superfund Innovative Technology Evaluation (SITE) program in 1992.« less

Heber Binary Project. Binary Cycle Geothermal Demonstration Power Plant (RP1900-1)

NASA Astrophysics Data System (ADS)

Lacy, R. G.; Nelson, T. T.

1982-12-01

The Heber Binary Project (1) demonstrates the potential of moderate temperature (below 410 F) geothermal energy to produce economic electric power with binary cycle conversion technology; (2) allows the scaling up and evaluation of the performance of binary cycle technology in geothermal service; (3) establishes schedule, cost and equipment performance, reservoir performance, and the environmental acceptability of such plants; and (4) resolves uncertainties associated with the reservoir performance, plant operation, and economics.

Vulnerability and social justice as factors in emergent U.S. nanotechnology risk perceptions.

PubMed

Conti, Joseph; Satterfield, Terre; Harthorn, Barbara Herr

2011-11-01

As an emerging domain of risk research, nanotechnologies engender novel research questions, including how new technologies are encountered given different framing and contextual detail. Using data from a recent U.S. national survey of perceived risks (N= 1,100), risk versus benefit framings and the specific social positions from which people encounter or perceive new technologies are explored. Results indicate that vulnerability and attitudes toward environmental justice significantly influenced risk perceptions of nanotechnology as a broad class, while controlling for demographic and affective factors. Comparative analyses of different examples of nanotechnology applications demonstrated heightened ambivalence across acceptability when risk versus benefit information was provided with application descriptions (described in short vignettes as compared to the general category "nanotechnology," absent of risk or benefit information). The acceptability of these nano-specific vignettes varied significantly in only some cases given indexes of vulnerability and attitudes toward environmental justice. However, experimental narrative analyses, using longer, more comprehensive descriptive passages, show how assessments of risks and benefits are tied to the systematically manipulated psychometric qualities of the application (its invasiveness and controllability), risk messaging from scientists, and the social implications of the technology with regard to justice. The article concludes with discussion of these findings for risk perception research and public policy related to nanotechnology and possibly other emerging technologies. © 2011 Society for Risk Analysis.

Consumer acceptance of irradiated food: theory and reality

NASA Astrophysics Data System (ADS)

Bruhn, Christine M.

1998-06-01

For years most consumers have expressed less concern about food irradiation than other food processing technologies. Attitude studies have demonstrated that when given science-based information, from 60% to 90% of consumers prefer the advantages irradiation processing provides. When information is accompanied by samples, acceptance may increase to 99%. Information on irradiation should include product benefits, safety and wholesomeness, address environmental safety issues, and include endorsements by recognized health authorities. Educational and marketing programs should now be directed toward retailers and processors. Given the opportunity, consumers will buy high quality, safety-enhanced irradiated food.

Concerning modeling of double-stage water evaporation cooling

NASA Astrophysics Data System (ADS)

Shatskiy, V. P.; Fedulova, L. I.; Gridneva, I. V.

2018-03-01

The matter of need for setting technical norms for production, as well as acceptable microclimate parameters, such as temperature and humidity, at the work place, remains urgent. Use of certain units should be economically sound and that should be taken into account for construction, assembly, operation, technological, and environmental requirements. Water evaporation coolers are simple to maintain, environmentally friendly, and quite cheap, but the development of the most efficient solutions requires mathematical modeling of the heat and mass transfer processes that take place in them.

Emerging technologies in bioremediation: constraints and opportunities.

PubMed

Rayu, Smriti; Karpouzas, Dimitrios G; Singh, Brajesh K

2012-11-01

Intensive industrialisation, inadequate disposal, large-scale manufacturing activities and leaks of organic compounds have resulted in long-term persistent sources of contamination of soil and groundwater. This is a major environmental, policy and health issue because of adverse effects of contaminants on humans and ecosystems. Current technologies for remediation of contaminated sites include chemical and physical remediation, incineration and bioremediation. With recent advancements, bioremediation offers an environmentally friendly, economically viable and socially acceptable option to remove contaminants from the environment. Three main approaches of bioremediation include use of microbes, plants and enzymatic remediation. All three approaches have been used with some success but are limited by various confounding factors. In this paper, we provide a brief overview on the approaches, their limitations and highlights emerging technologies that have potential to revolutionise the enzymatic and plant-based bioremediation approaches.

US EPA - A*Star Partnership - Accelerating the Acceptance of ...

EPA Pesticide Factsheets

The path for incorporating new alternative methods and technologies into quantitative chemical risk assessment poses a diverse set of scientific challenges. Some of these challenges include development of relevant and predictive test systems and computational models to integrate and extrapolate experimental data, and rapid characterization and acceptance of these systems and models. The series of presentations will highlight a collaborative effort between the U.S. Environmental Protection Agency (EPA) and the Agency for Science, Technology and Research (A*STAR) that is focused on developing and applying experimental and computational models for predicting chemical-induced liver and kidney toxicity, brain angiogenesis, and blood-brain-barrier formation. In addressing some of these challenges, the U.S. EPA and A*STAR collaboration will provide a glimpse of what chemical risk assessments could look like in the 21st century. Presentation on US EPA – A*STAR Partnership at international symposium on Accelerating the acceptance of next-generation sciences and their application to regulatory risk assessment in Singapore.

DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

EPA Pesticide Factsheets

The demonstration of technologies for determining the presence of dioxin in soil and sediment is being conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in Saginaw, Michigan, at Green Point Environmental Learning Center from approximately April 26 to May 6, 2004. The primary purpose of the demonstration is to evaluate innovative monitoring technologies. The technologies listed below will be demonstrated. .AhRC PCRTM Kit, Hybrizyme Corporation .Ah-IMMUNOASSY@ Kit, Paralsian, Inc. .Coplanar PCB Immunoassay Kit, Abraxis LLC .DF-l Dioxin/Furan Immunoassay Kit, CAPE Technologies L.L.C. .CALUX@ by Xenobiotic Detection Systems, Inc- .Dioxin ELISA Kit, Wako Pure Chemical Industries LTD. This demonstration plan describes the procedures that will be used to verify the performance and cost of these technologies. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to document each technology's performance and cost. A separate innovative technology verification report (ITVR) will.be prepared for each technology. The ITVRs will present the demonstration findings associated with the demonstration objectives. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Study of high-speed civil transports

NASA Technical Reports Server (NTRS)

1989-01-01

A systems study to identify the economic potential for a high-speed commercial transport (HSCT) has considered technology, market characteristics, airport infrastructure, and environmental issues. Market forecasts indicate a need for HSCT service in the 2000/2010 time frame conditioned on economic viability and environmental acceptability. Design requirements focused on a 300 passenger, 3 class service, and 6500 nautical mile range based on the accelerated growth of the Pacific region. Compatibility with existing airports was an assumed requirement. Mach numbers between 2 and 25 were examined in conjunction with the appropriate propulsion systems, fuels, structural materials, and thermal management systems. Aircraft productivity was a key parameter with aircraft worth, in comparison to aircraft price, being the airline-oriented figure of merit. Aircraft screening led to determination that Mach 3.2 (TSJF) would have superior characteristics to Mach 5.0 (LNG) and the recommendation that the next generation high-speed commercial transport aircraft use a kerosene fuel. The sensitivity of aircraft performance and economics to environmental constraints (e.g., sonic boom, engine emissions, and airport/community noise) was identified together with key technologies. In all, current technology is not adequate to produce viable HSCTs for the world marketplace. Technology advancements must be accomplished to meet environmental requirements (these requirements are as yet undetermined for sonic boom and engine emissions). High priority is assigned to aircraft gross weight reduction which benefits both economics and environmental aspects. Specific technology requirements are identified and national economic benefits are projected.

Advanced power assessment for Czech lignite. Task 3.6, Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sondreal, E.A.; Mann, M.D.; Weber, G.W.

1995-12-01

The US has invested heavily in research, development, and demonstration of efficient and environmentally acceptable technologies for the use of coal. The US has the opportunity to use its leadership position to market a range of advanced coal-based technologies internationally. For example, coal mining output in the Czech Republic has been decreasing. This decrease in demand can be attributed mainly to the changing structure of the Czech economy and to environmental constraints. The continued production of energy from indigenous brown coals is a major concern for the Czech Republic. The strong desire to continue to use this resource is amore » challenge. The Energy and Environmental Research Center undertook two major efforts recently. One effort involved an assessment of opportunities for commercialization of US coal technologies in the Czech Republic. This report is the result of that effort. The technology assessment focused on the utilization of Czech brown coals. These coals are high in ash and sulfur, and the information presented in this report focuses on the utilization of these brown coals in an economically and environmentally friendly manner. Sections 3--5 present options for utilizing the as-mined coal, while Sections 6 and 7 present options for upgrading and generating alternative uses for the lignite. Contents include Czech Republic national energy perspectives; powering; emissions control; advanced power generation systems; assessment of lignite-upgrading technologies; and alternative markets for lignite.« less

Biodegradation of 2,4-Dinitrotoluene and 2,6-Dinitrotoluene in a Pilot-Scale Aerobic Slurry Reactor System

DTIC Science & Technology

1999-09-28

Phytoremediation is generally economically favorable and environmentally acceptable relative to other more intrusive remediation technologies, but... leachate is 0.13 mg/L for 2,4- DNT, but no standard is available for 2,6-DNT and TNT. It should be pointed out that the observed residual concentrations

Gaining Regulator Acceptance of Natural Attenuation as a Remediation Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, M.B.

Monitored natural attenuation (MNA) makes use of biological degradation, chemical reactions with natural materials, and other processes to clean up contaminated soils and groundwater. In the past, the regulatory community has been slow to accept natural attenuation due to a misperception that natural attenuation is a ''do nothing'' approach. Recently however, regulators have been more open to considering MNA as part of an overall clean-up plan that includes active treatment technologies to remove or contain the source of contamination at a site. MNA is currently being implemented at the Savannah River Site for remediation of selected contaminants. The South Carolinamore » Department of Health and Environmental Control, who has regulatory authority over these actions, has accepted this process. Significant overall cost savings are forecast. Additionally, there will be less disruption to the ecosystem, compared with engineered technologies. This paper describes the monitored natural attenuation concept as well as the process of constructive engagement with the regulators to achieve acceptance. Application to DOE, DOD, and commercial sites, as well as acceptability to other regulatory bodies, will be discussed with an emphasis on strategies to prevent false starts in the negotiation process and inventing options that result in mutual gains for all parties.« less

The NSF/RANN FY 1975 program for geothermal resources research and technology

NASA Technical Reports Server (NTRS)

Kruger, P.

1974-01-01

The specific goal of the NSF geothermal program is the rapid development by industry of the nation's geothermal resources that can be demonstrated to be commercially, environmentally and socially acceptable as alternate energy sources. NSF, as the lead agency for the federal geothermal energy research program, is expediting a program which encompasses the objectives necessary for significant utilization. These include: acceleration of exploration and assessment methods to identify commercial geothermal resources; development of innovative and improved technology to achieve economic feasibility; evaluation of policy options to resolve environmental, legal, and institutional problems; and support of experimental research facilities for each type of geothermal resource. Specific projects in each of these four objective areas are part of the NSF program for fiscal year 1975.

Shuttle sonic boom - Technology and predictions. [environmental impact

NASA Technical Reports Server (NTRS)

Holloway, P. F.; Wilhold, G. A.; Jones, J. H.; Garcia, F., Jr.; Hicks, R. M.

1973-01-01

Because the shuttle differs significantly in both geometric and operational characteristics from conventional supersonic aircraft, estimation of sonic boom characteristics required a new technology base. The prediction procedures thus developed are reviewed. Flight measurements obtained for both the ascent and entry phases of the Apollo 15 and 16 and for the ascent phase only of the Apollo 17 missions are presented which verify the techniques established for application to shuttle. Results of extensive analysis of the sonic boom overpressure characteristics completed to date are presented which indicate that this factor of the shuttle's environmental impact is predictable, localized, of short duration and acceptable. Efforts are continuing to define the shuttle sonic boom characteristics to a fine level of detail based on the final system design.

The Barriers to Acceptance of Plug-in Electric Vehicles: 2017 Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, Mark R.

Vehicle manufacturers, government agencies, universities, private researchers, and organizations worldwide are pursuing advanced vehicle technologies that aim to reduce the consumption of petroleum in the forms of gasoline and diesel. Plug-in electric vehicles (PEVs) are one such technology. This report, an update to the previous version published in December 2016, details findings from a study in February 2017 of broad American public sentiments toward issues that surround PEVs. This report is supported by the U.S. Department of Energy's Vehicle Technologies Office in alignment with its mission to develop and deploy these technologies to improve energy security, enhance mobility flexibility, reducemore » transportation costs, and increase environmental sustainability.« less

Phytoremediation of explosives (TNT, RDX, HMX) by wild-type and transgenic plants.

PubMed

Panz, Katarzyna; Miksch, Korneliusz

2012-12-30

The large-scale production and processing of munitions has led to vast environmental pollution by the compounds TNT(2,4,6-trinitrotoluene), RDX(hexahydro-1,3,5-trinitro-1,3,5-triazine) and HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine). Explosives contain these toxic and mutagenic xenobiotics, which are stable in the environment and recalcitrant to remediation. Certain technologies used thus far (incineration, adsorption, advanced oxidations processes, chemical reduction etc.) have not only been very expensive but also caused additional environmental problems. During recent decades, the most popular technologies have been biotechnological methods, such as phytoremediation, which is relatively cheap, environmentally friendly, and a highly accepted solution by society. The most promising of these technologies is the usage of genetically modified plants, which combines the ability of bacterial genes to detoxify compounds with the phytoremediation benefits of plants. This paper is a review related to the latest and most important achievements in the field of phytoremediation of water and soil contaminated with TNT, RDX and HMX. Copyright © 2012 Elsevier Ltd. All rights reserved.

CROSS-DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY: Environmental Impacts on Spiking Properties in Hodgkin-Huxley Neuron with Direct Current Stimulus

NASA Astrophysics Data System (ADS)

Yuan, Chang-Qing; Zhao, Tong-Jun; Zhan, Yong; Zhang, Su-Hua; Liu, Hui; Zhang, Yu-Hong

2009-11-01

Based on the well accepted Hodgkin-Huxley neuron model, the neuronal intrinsic excitability is studied when the neuron is subject to varying environmental temperatures, the typical impact for its regulating ways. With computer simulation, it is found that altering environmental temperature can improve or inhibit the neuronal intrinsic excitability so as to influence the neuronal spiking properties. The impacts from environmental factors can be understood that the neuronal spiking threshold is essentially influenced by the fluctuations in the environment. With the environmental temperature varying, burst spiking is realized for the neuronal membrane voltage because of the environment-dependent spiking threshold. This burst induced by changes in spiking threshold is different from that excited by input currents or other stimulus.

Getting rid of the unwanted: highlights of developments and challenges of biobeneficiation of iron ore minerals-a review.

PubMed

Adeleke, Rasheed A

2014-12-01

The quest for quality mineral resources has led to the development of many technologies that can be used to refine minerals. Biohydrometallurgy is becoming an increasingly acceptable technology worldwide because it is cheap and environmentally friendly. This technology has been successfully developed for some sulphidic minerals such as gold and copper. In spite of wide acceptability of this technology, there are limitations to its applications especially in the treatment of non-sulphidic minerals such as iron ore minerals. High levels of elements such as potassium (K) and phosphorus (P) in iron ore minerals are known to reduce the quality and price of these minerals. Hydrometallurgical methods that are non-biological involving the use of chemicals are usually used to deal with this problem. However, recent advances in mining technologies favour green technologies, known as biohydrometallurgy, with minimal impact on the environment. This technology can be divided into two, namely bioleaching and biobeneficiation. This review focuses on Biobeneficiation of iron ore minerals. Biobeneficiation of iron ore is very challenging due to the low price and chemical constitution of the ore. There are substantial interests in the exploration of this technology for improving the quality of iron ore minerals. In this review, current developments in the biobeneficiation of iron ore minerals are considered, and potential solutions to challenges faced in the wider adoption of this technology are proposed.

Design approaches to more energy efficient engines

NASA Technical Reports Server (NTRS)

Saunders, N. T.; Colladay, R. S.; Macioce, L. E.

1978-01-01

The status of NASA's Energy Efficient Engine Project, a comparative government-industry effort aimed at advancing the technology base for the next generation of large turbofan engines for civil aircraft transports is summarized. Results of recently completed studies are reviewed. These studies involved selection of engine cycles and configurations that offer potential for at least 12% lower fuel consumption than current engines and also are economically attractive and environmentally acceptable. Emphasis is on the advancements required in component technologies and systems design concepts to permit future development of these more energy efficient engines.

Pressurized fluidized bed offers promising route to cogeneration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-03-01

STAL-LAVAL has been monitoring the development of pressurized fluidized-bed combustion (PFBC) technology and has decided to apply it as a way to burn coal and satisfy the important criteria of efficiency, low cost, environmental acceptability, low investment cost, and the capacity to use a wide range of coal qualities. The present status of PFBC and co-generation technology is reviewed and examples of industrial as well as utiltiy applications are cited. A successful commercialization of PFBC could contribute to the success of coal-utilization policies. (DCK)

Prospects for coal slurry pipelines in California

NASA Technical Reports Server (NTRS)

Lynch, J. F.

1978-01-01

The coal slurry pipeline segment of the transport industry is emerging in the United States. If accepted it will play a vital role in meeting America's urgent energy requirements without public subsidy, tax relief, or federal grants. It is proven technology, ideally suited for transport of an abundant energy resource over thousands of miles to energy short industrial centers and at more than competitive costs. Briefly discussed are the following: (1) history of pipelines; (2) California market potential; (3) slurry technology; (4) environmental benefits; (5) market competition; and (6) a proposed pipeline.

Phytoremediation: A novel strategy for the removal of toxic metals from the environment using plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salt, D.E.; Blaylock, M.; Kumar, N. P.B.A.

1995-05-01

Toxic metal pollution of waters and soils is a major environmental problem, and most conventional remediation approaches do not provide acceptable solutions. The use of specially selected and engineered metal-accumulating plants for environmental clean-up is an emerging technology called phytoremediation. Three subsets of this technology are applicable to toxic metal remediation: (1) Phytoextraction: the use of metal-accumulating plants to remove toxic metals from soil; (2) Rhizofiltration: the use of plant roots to remove toxic metals from polluted waters; and (3) Phytostabilization: the use of plants to eliminate the bioavailability of toxic metals in soils. Biological mechanisms of toxic metal uptake,more » translocation and resistance as well as strategies for improving phytoremediation are also discussed. 83 refs., 4 figs., 1 tab.« less

Approaches to acceptable risk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whipple, C

Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, inmore » a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.« less

Management practices for end-of-life cathode ray tube glass: Review of advances in recycling and best available technologies.

PubMed

Iniaghe, Paschal O; Adie, Gilbert U

2015-11-01

Cathode ray tubes are image display units found in computer monitors and televisions. In recent years, cathode ray tubes have been generated as waste owing to the introduction of newer and advanced technologies in image displays, such as liquid crystal displays and high definition televisions, among others. Generation and subsequent disposal of end-of-life cathode ray tubes presents a challenge owing to increasing volumes and high lead content embedded in the funnel and neck sections of the glass. Disposal in landfills and open dumping are anti-environmental practices considering the large-scale contamination of environmental media by the potential of toxic metals leaching from glass. Mitigating such environmental contamination will require sound management strategies that are environmentally friendly and economically feasible. This review covers existing and emerging management practices for end-of-life cathode ray tubes. An in-depth analysis of available technologies (glass smelting, detoxification of cathode ray tube glass, lead extraction from cathode ray tube glass) revealed that most of the techniques are environmentally friendly, but are largely confined to either laboratory scale, or are often limited owing to high cost to mount, or generate secondary pollutants, while a closed-looped method is antiquated. However, recycling in cementitious systems (cement mortar and concrete) gives an added advantage in terms of quantity of recyclable cathode ray tube glass at a given time, with minimal environmental and economic implications. With significant quantity of waste cathode ray tube glass being generated globally, cementitious systems could be economically and environmentally acceptable as a sound management practice for cathode ray tube glass, where other technologies may not be applicable. © The Author(s) 2015.

Utilizing the right mix of environmental cleanup technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitaker, Wade; Bergren, Chris; Flora, Mary

2007-07-01

The Savannah River Site (SRS) is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units that are required by environmental regulations, to undergo characterization and, if needed, remediation.more » In the initial years of the SRS environmental cleanup program (early 1990's), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical / pH-adjusting injection, phyto-remediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baro-balls, electrical resistance heating, soil vapor extraction, and micro-blowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works pro-actively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup technologies. Remediating large, complex groundwater plumes using state of-the art technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted. (authors)« less

Social acceptability of Satellite Power Systems (SPS): the near-term outlook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klineberg, S L

1980-05-01

It is important, at this early stage in the concept development and evaluation of Satellite Power Systems, to explore aspects of contemporary social change that may be expected to complicate the process of achieving the necessary support of the American public for this new technological venture. Current public attitudes make it appear unlikely that a consensus will evolve during the 1980s favoring costly efforts to develop vast new supplies of conventional energy. Opinion polls reveal a pervasive worry over inflation, a broadening of aspirations to encompass quality-of-life concerns, a growing distrust of central governments, large corporations, big science and technology,more » and a continuing commitment to environmental protection - all of which suggests a social environment that is likely to resist the development of a major new high-technology energy system such as the SPS. Opposition to satellite power will focus on the high front-end development costs, on environmental and technical uncertainties, and on a generalized distrust of large bureaucracies and esoteric technologies. The SPS concept is also likely to be viewed with skepticism by those with vested interests in the long-run uses of coal, shale, fission, fusion, or on-site solar technologies. The growing commitment to energy conservation and the spreading deployment of dispersed renewable-energy systems strongly suggest that the unmet US demand for centrally generated electricity is unlikely to grow sufficiently over the next twenty years to convince a reluctant public of the need for so large an investment of scarce resources in the SPS program. Satellite Power Systems will have a problem in the area of public acceptability.« less

Hydroponic phytoremediation of heavy metals and radionuclides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hartong, J.; Szpak, J.; Hamric, T.

1998-07-01

It is estimated that the Departments of Defense, Energy, and Agriculture will spend up to 300 billion federal dollars on environmental remediation during the next century. Current remediation processes can be expensive, non-aesthetic, and non-versatile. Therefore, the need exists for more innovative and cost effective solutions. Phytoremediation, the use of vegetation for the remediation of contaminated sediments, soils, and ground water, is an emerging technology for treating several categories of persistent, toxic contaminants. Although effective, phytoremediation is still in a developmental stage, and therefore is not a widely accepted technology by regulatory agencies and public groups. Research is currently beingmore » conducted to validate the processes effectiveness as well as increase regulatory and community acceptance. This research will focus on the ability of plants to treat an aquifer contaminated with heavy metals and radionuclides. Specifically, the effectiveness of hydroponically grown dwarf sunflowers and mustard seed will be investigated.« less

Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-09-01

The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologiesmore » identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.« less

Tyler Prize nominations sought

NASA Astrophysics Data System (ADS)

Showstack, Randy

2012-08-01

Nominations for the 2013 Tyler Prize for Environmental Achievement are being accepted until 21 September. The prize is considered the top international award that honors achievements and contributions in environmental science, protection, energy, and medicine. Among previous recipients are a number of AGU members, including 2012 awardee John Seinfeld, the Louis E. Nohl Professor and professor of chemical engineering at the California Institute of Technology, who was recognized for his contributions to the understanding of the origin, chemistry, and evolution of aerosols in the atmosphere. For more information about the prize, prior honorees, and nomination requirements, see http://www.tylerprize.usc.edu

Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

NASA Astrophysics Data System (ADS)

Arning, Katrin; Ziefle, Martina

Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

Do I Have to Learn Something New? Mental Models and the Acceptance of Replacement Technologies

ERIC Educational Resources Information Center

Zhang, Wei; Xu, Peng

2011-01-01

Few studies in technology acceptance have explicitly addressed the acceptance of replacement technologies, technologies that replace legacy ones that have been in use. This article explores this issue through the theoretical lens of mental models. We contend that accepting replacement technologies entails both mental model maintenance and mental…

Drivers of an urban community's acceptance of a large desalination scheme for drinking water

NASA Astrophysics Data System (ADS)

Gibson, Fiona L.; Tapsuwan, Sorada; Walker, Iain; Randrema, Elodie

2015-09-01

Changing climates and growing populations have prompted policy makers to shift to more climate resilient, technology-driven water sources, such as seawater desalination. Desalination is a prominent water resource in the Middle East but countries in other parts of the world with similar scarcity issues and good access to sea water, such as Australia, have been comparatively slow to adopt it. This paper explores attitudes to desalination in Perth, Western Australia, and the factors that influence its acceptance. We compared individuals' acceptance of desalination over two time periods by using identical surveys administered in 2007 and 2012. We then examined the attitudinal factors - attitudes towards desalination and attitudes towards the environment - that influence acceptance. Acceptance of desalination was reasonably high and stable at both times (74% and 73% in 2007 and 2012 respectively). We found that respondents' attitudes to perceived outcomes and benefits, fairness, environmental obligation and risk were important predictors of their acceptance of desalination in both surveys. However the weight given to these aspects varied over time. The findings show that there is still mixed community sentiment towards desalination, which helps to explain why acceptance has not increased since desalination was introduced in 2006.

High-speed civil transport study. Summary

NASA Technical Reports Server (NTRS)

1989-01-01

A system of study of the potential for a high speed commercial transport aircraft addressed technology, economic, and environmental constraints. Market projections indicated a need for fleets of transport with supersonic or greater cruise speeds by the years 2000 to 2005. The associated design requirements called for a vehicle to carry 250 to 300 passengers over a range of 5000 to 6000 nautical miles. The study was initially unconstrained in terms of vehicle characteristics, such as cruise speed, propulsion systems, fuels, or structural materials. Analyses led to a focus on the most promising vehicle concepts. These were concepts that used a kerosene type fuel and cruised at Mach numbers between 2.0 to 3.2. Further systems study identified the impact of environmental constraints (for community noise, sonic boom, and engine emissions) on economic attractiveness and technological needs. Results showed that current technology cannot produce a viable high speed civil transport. Significant advances are needed to take off gross weight and allow for both economic attractiveness and environment acceptability. Specific technological requirements were identified to meet these needs.

Gene Technology for Papaya Ringspot Virus Disease Management

PubMed Central

Azad, Md. Abul Kalam; Sidik, Nik Marzuki

2014-01-01

Papaya (Carica papaya) is severely damaged by the papaya ringspot virus (PRSV). This review focuses on the development of PRSV resistant transgenic papaya through gene technology. The genetic diversity of PRSV depends upon geographical distribution and the influence of PRSV disease management on a sequence of PRSV isolates. The concept of pathogen-derived resistance has been employed for the development of transgenic papaya, using a coat protein-mediated, RNA-silencing mechanism and replicase gene-mediated transformation for effective PRSV disease management. The development of PRSV-resistant papaya via post-transcriptional gene silencing is a promising technology for PRSV disease management. PRSV-resistant transgenic papaya is environmentally safe and has no harmful effects on human health. Recent studies have revealed that the success of adoption of transgenic papaya depends upon the application, it being a commercially viable product, bio-safety regulatory issues, trade regulations, and the wider social acceptance of the technology. This review discusses the genome and the genetic diversity of PRSV, host range determinants, molecular diagnosis, disease management strategies, the development of transgenic papaya, environmental issues, issues in the adoption of transgenic papaya, and future directions for research. PMID:24757435

Gene technology for papaya ringspot virus disease management.

PubMed

Azad, Md Abul Kalam; Amin, Latifah; Sidik, Nik Marzuki

2014-01-01

Papaya (Carica papaya) is severely damaged by the papaya ringspot virus (PRSV). This review focuses on the development of PRSV resistant transgenic papaya through gene technology. The genetic diversity of PRSV depends upon geographical distribution and the influence of PRSV disease management on a sequence of PRSV isolates. The concept of pathogen-derived resistance has been employed for the development of transgenic papaya, using a coat protein-mediated, RNA-silencing mechanism and replicase gene-mediated transformation for effective PRSV disease management. The development of PRSV-resistant papaya via post-transcriptional gene silencing is a promising technology for PRSV disease management. PRSV-resistant transgenic papaya is environmentally safe and has no harmful effects on human health. Recent studies have revealed that the success of adoption of transgenic papaya depends upon the application, it being a commercially viable product, bio-safety regulatory issues, trade regulations, and the wider social acceptance of the technology. This review discusses the genome and the genetic diversity of PRSV, host range determinants, molecular diagnosis, disease management strategies, the development of transgenic papaya, environmental issues, issues in the adoption of transgenic papaya, and future directions for research.

Involving stakeholders in evaluating environmental restoration technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCabe, G.H.; Serie, P.J.

1993-02-01

Involving citizens, interest groups, and regulators in environmental restoration and waste management programs is a challenge for government agencies and the organizations that support them. To be effective, such involvement activities must identify all individuals and groups who have a stake in the cleanup. Their participation must be early, substantive, and meaningful. Stockholders must be able to see how their input was considered and used, and feel that a good- faith effort was made to reconcile conflicting objectives. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is a Department of Energy Office of Technologymore » Development project located at Hanford. Along with technical evaluation of innovative cleanup technologies, the program is conducting an institutional assessment of regulatory and public acceptance of new technologies. Through a series of interviews and workshops, and use of a computerized information management tool, stakeholders are having a voice in the evaluation. Public and regulatory reaction has been positive.« less

Exhaust Nozzle Materials Development for the High Speed Civil Transport

NASA Technical Reports Server (NTRS)

Grady, J. E.

1999-01-01

The United States has embarked on a national effort to develop the technology necessary to produce a Mach 2.4 High Speed Civil Transport (HSCT) for entry into service by the year 2005. The viability of this aircraft is contingent upon its meeting both economic and environmental requirements. Two engine components have been identified as critical to the environmental acceptability of the HSCT. These include a combustor with significantly lower emissions than are feasible with current technology, and a lightweight exhaust nozzle that meets community noise standards. The Enabling Propulsion Materials (EPM) program will develop the advanced structural materials, materials fabrication processes, structural analysis and life prediction tools for the HSCT combustor and low noise exhaust nozzle. This is being accomplished through the coordinated efforts of the NASA Lewis Research Center, General Electric Aircraft Engines and Pratt & Whitney. The mission of the EPM Exhaust Nozzle Team is to develop and demonstrate this technology by the year 1999 to enable its timely incorporation into HSCT propulsion systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, M.L.

This paper very briefly summarizes progress in the demonstration of a small (up to 6 MWe), environmentally acceptable electric generating system fueled by indigenous fuels and waste materials to serve power distribution systems typical of Alaskan Native communities. Two detailed appendices supplement the report. The project is focused on two primary technologies: (1) atmospheric fluidized bed combustion (AFBC), and (2) coalbed methane and coal-fired diesel technologies. Two sites have been selected as possible locations for an AFBC demonstration, and bid proposals are under review. The transfer of a coal-fired diesel clean coal demonstration project from Maryland to Fairbanks, Alaska wasmore » approved, and the environmental assessment has been initiated. Federal support for a fuel cell using coalbed methane is also being pursued. The appendices included in the report provide: (1) the status of the conceptual design study for a 600-kWe coal-fired cogeneration plant in McGrath, Alaska; and (2) a global market assessment of coalbed methane, fluidized-bed combustion, and coal-fired diesel technologies in remote applications.« less

Apollo experience report environmental acceptance testing

NASA Technical Reports Server (NTRS)

Laubach, C. H. M.

1976-01-01

Environmental acceptance testing was used extensively to screen selected spacecraft hardware for workmanship defects and manufacturing flaws. The minimum acceptance levels and durations and methods for their establishment are described. Component selection and test monitoring, as well as test implementation requirements, are included. Apollo spacecraft environmental acceptance test results are summarized, and recommendations for future programs are presented.

Advanced supersonic technology and its implications for the future

NASA Technical Reports Server (NTRS)

Driver, C.

1979-01-01

A brief overview of the NASA Supersonic Cruise Research (SCR) program is presented. The SCR program has identified significant improvements in the areas of aerodynamics, structures, propulsion, noise reduction, takeoff and landing procedures, and advanced configuration concepts. These improvements tend to overcome most of the problems which led to the cancellation of the National SST program. They offer the promise of an advanced SST family of aircraft which are environmentally acceptable, have flexible range-payload capability, and are economically viable. The areas of technology addressed by the SCR program have direct application to advanced military aircraft and to supersonic executive aircraft.

The three main monotheistic religions and gm food technology: an overview of perspectives.

PubMed

Omobowale, Emmanuel B; Singer, Peter A; Daar, Abdallah S

2009-08-22

Public acceptance of genetically modified crops is partly rooted in religious views. However, the views of different religions and their potential influence on consumers' decisions have not been systematically examined and summarized in a brief overview. We review the positions of the Judaism, Islam and Christianity - the three major monotheistic religions to which more than 55% of humanity adheres to - on the controversies aroused by GM technology. The article establishes that there is no overarching consensus within the three religions. Overall, however, it appears that mainstream theology in all three religions increasingly tends towards acceptance of GM technology per se, on performing GM research, and on consumption of GM foods. These more liberal approaches, however, are predicated on there being rigorous scientific, ethical and regulatory scrutiny of research and development of such products, and that these products are properly labeled. We conclude that there are several other interests competing with the influence exerted on consumers by religion. These include the media, environmental activists, scientists and the food industry, all of which function as sources of information and shapers of perception for consumers.

Unique Systems Analysis Task 7, Advanced Subsonic Technologies Evaluation Analysis

NASA Technical Reports Server (NTRS)

Eisenberg, Joseph D. (Technical Monitor); Bettner, J. L.; Stratton, S.

2004-01-01

To retain a preeminent U.S. position in the aircraft industry, aircraft passenger mile costs must be reduced while at the same time, meeting anticipated more stringent environmental regulations. A significant portion of these improvements will come from the propulsion system. A technology evaluation and system analysis was accomplished under this task, including areas such as aerodynamics and materials and improved methods for obtaining low noise and emissions. Previous subsonic evaluation analyses have identified key technologies in selected components for propulsion systems for year 2015 and beyond. Based on the current economic and competitive environment, it is clear that studies with nearer turn focus that have a direct impact on the propulsion industry s next generation product are required. This study will emphasize the year 2005 entry into service time period. The objective of this study was to determine which technologies and materials offer the greatest opportunities for improving propulsion systems. The goals are twofold. The first goal is to determine an acceptable compromise between the thermodynamic operating conditions for A) best performance, and B) acceptable noise and chemical emissions. The second goal is the evaluation of performance, weight and cost of advanced materials and concepts on the direct operating cost of an advanced regional transport of comparable technology level.

A perspective on the potential development of environmentally acceptable light-duty diesel vehicles.

PubMed Central

Hammerle, R; Schuetzle, D; Adams, W

1994-01-01

Between 1979 and 1985, an international technical focus was placed upon potential human health effects associated with exposure to diesel emissions. A substantial data base was developed on the composition of diesel emissions; the fate of these emissions in the atmosphere; and the effects of whole particles and their chemical constituents on microorganisms, cells, and animals. Since that time, a number of significant developments have been made in diesel engine technology that require a new look at the future acceptability of introducing significant numbers of light-duty diesel automobiles into the European and American markets. Significant engineering improvements have been made in engine design, catalysts, and traps. As a result, particle emissions and particle associated organic emissions have been reduced by about 10 and 30 times, respectively, during the past 10 years. Research studies to help assess the environmental acceptability of these fuel-efficient engines include the development of an emissions data base for current and advanced diesel engines, the effect of diesel emissions on urban ozone formation and atmospheric particle concentrations, the effect of fuel composition, e.g., lower sulfur and additives on emissions, animal inhalation toxicology studies, and fundamental molecular biology studies. PMID:7529704

Evaluation of User Acceptance of Mixed Reality Technology

ERIC Educational Resources Information Center

Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

2011-01-01

This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

Social Media Usage: Examination of Influencers and Effects

ERIC Educational Resources Information Center

Brooks, Stoney L.

2013-01-01

This dissertation is concerned with investigating topics surrounding the phenomenon of social media usage. Essay One draws from the technology acceptance literature by utilizing concepts from the Technology Acceptance Model (TAM), the Unified Theory of Acceptance and Use of Technology (UTAUT), and the model of hedonic technology acceptance. The…

Investigating the degree of "stigma" associated with nuclear energy technologies: A cross-cultural examination of the case of fusion power.

PubMed

Horlick-Jones, Tom; Prades, Ana; Espluga, Josep

2012-07-01

The extent to which nuclear energy technologies are, in some sense, "stigmatised" by historical environmental and military associations is of particular interest in contemporary debates about sustainable energy policy. Recent claims in the literature suggest that despite such stigmatisation, lay views on such technologies may be shifting towards a "reluctant acceptance," in the light of concerns about issues like anthropogenic climate change. In this paper, we report on research into learning and reasoning processes concerned with a largely unknown nuclear energy technology; namely fusion power. We focus on the role of the nuclear label, or "brand," in informing how lay citizens make sense of the nature of this technology. Our findings derive from a comparative analysis of data generated in Spain and Britain, using the same methodology.

Evaluating residents' preferences for remediation technologies: A choice experiment approach.

PubMed

Huynh, Elisabeth; Araña, Jorge E; Prior, Jason

2018-04-15

The choice of technologies used to remediate contaminated environments is increasingly made through engagement with a multitude of stakeholders including affected residents. Despite this, little is known about how residents perceive remediation technology applications. In this study a choice experiment is designed to explore ways of understanding and measuring residents' preferences for different remediation technologies approaches using a sample of 944 residents in New South Wales, Australia. Analysis reveals that the residents' acceptability of remediation technologies can be explained by both the efficacy of the technology in improving the environmental quality of the community, and the reputational value of the technology. In particular it is found that residents prefer Monitor Natural Attenuation and Bioremediation to other remediation technologies. In particular they are willing to pay an increase in yearly taxes of $44.60 and $41.15 respectively for implementing such technologies instead of alternative remediation technologies like Chemical remediation. Copyright © 2017 Elsevier B.V. All rights reserved.

Point-of-care Cognitive Support Technology in Emergency Departments: A Scoping Review of Technology Acceptance by Clinicians.

PubMed

Jun, Shelly; Plint, Amy C; Campbell, Sandy M; Curtis, Sarah; Sabir, Kyrellos; Newton, Amanda S

2018-05-01

Cognitive support technologies that support clinical decisions and practices in the emergency department (ED) have the potential to optimize patient care. However, limited uptake by clinicians can prevent successful implementation. A better understanding of acceptance of these technologies from the clinician perspective is needed. We conducted a scoping review to synthesize diverse, emerging evidence on clinicians' acceptance of point-of-care (POC) cognitive support technology in the ED. We systematically searched 10 electronic databases and gray literature published from January 2006 to December 2016. Studies of any design assessing an ED-based POC cognitive support technology were considered eligible for inclusion. Studies were required to report outcome data for technology acceptance. Two reviewers independently screened studies for relevance and quality. Study quality was assessed using the Mixed-Methods Appraisal Tool. A descriptive analysis of the features of POC cognitive support technology for each study is presented, illustrating trends in technology development and evaluation. A thematic analysis of clinician, technical, patient, and organizational factors associated with technology acceptance is also presented. Of the 1,563 references screened for eligibility, 24 met the inclusion criteria and were included in the review. Most studies were published from 2011 onward (88%), scored high for methodologic quality (79%), and examined POC technologies that were novel and newly introduced into the study setting (63%). Physician use of POC technology was the most commonly studied (67%). Technology acceptance was frequently conceptualized and measured by factors related to clinician attitudes and beliefs. Experience with the technology, intention to use, and actual use were also more common outcome measures of technology acceptance. Across studies, perceived usefulness was the most noteworthy factor impacting technology acceptance, and clinicians generally had positive perceptions of the use of POC cognitive support technology in the ED. However, the actual use of POC cognitive support technology reported by clinicians was low-use, by proportion of patient cases, ranged from 30% to 59%. Of the 24 studies, only two studies investigated acceptance of POC cognitive support technology currently implemented in the ED, offering "real-world" clinical practice data. All other studies focused on acceptance of novel technologies. Technical aspects such as an unfriendly user interface, presentation of redundant or ambiguous information, and required user effort had a negative impact on acceptance. Patient expectations were also found to have a negative impact, while patient safety implications had a positive impact. Institutional support was also reported to impact technology acceptance. Findings from this scoping review suggest that while ED clinicians acknowledge the utility and value of using POC cognitive support technology, actual use of such technology can be low. Further, few studies have evaluated the acceptance and use of POC technologies in routine care. Prospective studies that evaluate how ED clinicians appraise and consider POC technology use in clinical practice are now needed with diverse clinician samples. While this review identified multiple factors contributing to technology acceptance, determining how clinician, technical, patient, and organizational factors mediate or moderate acceptance should also be a priority. © 2017 by the Society for Academic Emergency Medicine.

Educational Technology Acceptance across Cultures: A Validation of the Unified Theory of Acceptance and Use of Technology in the Context of Turkish National Culture

ERIC Educational Resources Information Center

Gogus, Aytac; Nistor, Nicolae; Riley, Richard W.; Lerche, Thomas

2012-01-01

The Unified Theory of Acceptance and Use of Technology (UTAUT; Venkatesh et al., 2003, 2012) proposes a major model of educational technology acceptance (ETA) which has been yet validated only in few languages and cultures. Therefore, this study aims at extending the applicability of UTAUT to Turkish culture. Based on acceptance and cultural data…

Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

PubMed

Strudwick, Gillian

2015-05-01

The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

Economic, Environmental and Moral Acceptance of Renewable Energy: A Case Study-The Agricultural Biogas Plant at Pěčín.

PubMed

Vochozka, Marek; Maroušková, Anna; Šuleř, Petr

2018-02-01

The production of renewable energy in agricultural biogas plants is being widely criticized because-among other things-most of the feedstock comes from purpose-grown crops like maize. These activities (generously subsidized in the Czech Republic) generate competitive pressure to other crops that are used for feeding or food production, worsening their affordability. Unique pretreatment technology that allows substitution of the purpose-grown crops by farming residues (such as husk or straw) was built 6 years ago on a commercial basis in Pěčín (Czech Republic) under modest funding and without publicity. The design of the concept; financial assessment and moral viewpoint were analyzed based on practical operating data. It showed that the apparatus improves economic, environmental and moral acceptance as well. However, according to the government's view, public funding for this type of processing was shortened, "because waste materials represent a lower cost". The impact of such governance was analyzed as well.

Older Adults' Acceptance of Information Technology

ERIC Educational Resources Information Center

Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

2011-01-01

This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

Predicting User Acceptance of Collaborative Technologies: An Extension of the Technology Acceptance Model for E-Learning

ERIC Educational Resources Information Center

Cheung, Ronnie; Vogel, Doug

2013-01-01

Collaborative technologies support group work in project-based environments. In this study, we enhance the technology acceptance model to explain the factors that influence the acceptance of Google Applications for collaborative learning. The enhanced model was empirically evaluated using survey data collected from 136 students enrolled in a…

Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Gyamfi, Stephen Adu

2016-01-01

This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

ERIC Educational Resources Information Center

Kirmizi, Özkan

2014-01-01

The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

Understanding Technology Acceptance in Pre-Service Teachers of Primary Mathematics in Hong Kong

ERIC Educational Resources Information Center

Wong, Gary K. W.

2015-01-01

The adoption of educational technology in teaching depends on how well a teacher accepts it. This paper draws on a technology acceptance survey of pre-service primary mathematics teachers in Hong Kong to study the factors influencing their technology acceptance. This work adopted a mixed method approach, in which quantitative data were collected…

Ozone Response to Aircraft Emissions: Sensitivity Studies with Two-dimensional Models

NASA Technical Reports Server (NTRS)

Ko, Malcolm K. W.; Weisenstein, Debra; Jackman, Charles H.; Douglass, Anne R.; Bureske, K.; Weubbles, Donald J.; Kinnison, Douglas E.; Brasseur, G.; Pyle, J.; Jones, Anna

1992-01-01

Our first intercomparison/assessment of the effects of a proposed high-speed civil transport (HSCT) fleet on the stratosphere is presented. These model calculations should be considered more as sensitivity studies, primarily designed to serve the following purposes: (1) to allow for intercomparison of model predictions; (2) to focus on the range of fleet operations and engine specifications giving minimal environmental impact; and (3) to provide the basis for future assessment studies. The basic scenarios were chosen to be as realistic as possible, using the information available on anticipated developments in technology. They are not to be interpreted as a commitment or goal for environmental acceptability.

Transferring new technologies within the federal sector: The New Technology Demonstration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, D.R.; Hunt, D.M.

1994-08-01

The federal sector is the largest consumer of products in the United States and annually purchases almost 1.5 quads of energy measured at the building site at a cost of almost $10 billion (U.S. Department of Energy 1991). A review of design, construction, and procurement practices in the federal sector, as well as discussions with manufacturers and vendors, indicated that new technologies are not utilized in as timely a manner as possible. As a consequence of this technology transfer lag, the federal sector loses valuable energy and environmental benefits that can be derived through the application of new technologies. Inmore » addition, opportunities are lost to reduce federal energy expenditures and spur U.S. economic growth through the procurement of such technologies. In 1990, under the direction of the U.S. Department of Energy (DOE) Federal Energy Management Program, the Pacific Northwest Laboratory began the design of a program to accelerate the introduction of new U.S. technologies into the federal sector. Designated first as the Test Bed Demonstration Program and more recently the New Technology Demonstration Program, it sought to shorten the acceptance period of new technologies within the federal sector. By installing and evaluating various new technologies at federal facilities, the Program attempts to increase the acceptance of those new technologies through the results of {open_quotes}real-world{close_quotes} federal installations. Since that time, the Program has conducted new technology demonstrations and evaluations, evolved to address the need for more timely information transfer, and explored collaborative opportunities with other DOE offices and laboratories. This paper explains the processes by which a new technology demonstration project is implemented and presents a general description of the Program results to date.« less

Physio-Environmental Sensing and Live Modeling

PubMed Central

Diaz, Vanessa; Gaggioli, Andrea; Liò, Pietro; Mazzà, Claudia; Merelli, Emanuela; Meskers, Carel G.M; Pappalardo, Francesco; von Ammon, Rainer

2013-01-01

In daily life, humans are constantly interacting with their environment. Evidence is emerging that this interaction is a very important modulator of health and well-being, even more so in our rapidly ageing society. Information and communication technology lies at the heart of the human health care revolution. It cannot remain acceptable to use out of date data analysis and predictive algorithms when superior alternatives exist. Communication network speed, high penetration of home broadband, availability of various mobile network options, together with the available detailed biological data for individuals, are producing promising advances in computerized systems that will turn information on human-environment interactions into actual knowledge with the potential to help make medical and lifestyle decisions. We introduced and discussed a key scenario in which hardware and software technologies capable of simultaneously sensing physiological and environmental signals process health care data in real-time to issue alarms, warnings, or simple recommendations to the patient or carers. PMID:23612245

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, F. G.; Daniels, E. J.

This report summarizes an assessment conducted by Environmental Technologies Alternatives, Inc., under a subcontract to Argonne National Laboratory. The project was conducted in two phases. An assessment of alternative technologies for recycling of prompt non-tire rubber was conducted in the first phase, and an experimental program focusing on a new technology called the catalytic Regeneration Process offered the greatest opportunity for recovery of high-value recyclable rubber material. An experimental and large-scale test program was undertaken to further delineate the economic potential as an essential step leading to commercial deployment and to determine the course of continued development of the technologymore » by the private sector. The experimental program defined process-operating conditions for the technology and verified the degree of devulcanisation achievable for two rubber compounds: ethylene-propylene-nonconjugated-diene monomer (EPDM) and neoprene. To determine product acceptance, samples of devulcanized EPDM and neoprene were prepared and used in factory trials for the production of automotive moldings (EPDM) and fiber-filled belting (neoprene). The factory trials indicated that the physical properties of the products were acceptable in both cases. The appearance of molded and calendared surface finishes was acceptable, while that of extruded finishes was unsatisfactory. The fiber-filled neoprene belting application offers the greatest economic potential. Process costs were estimated at $0.34/lb for neoprene waste rubber relative to a value of $0.57/lb. The results of the experimental program led to the decision to continue development of this technology is being planned, subject to the availability of about $3 million in financing from private-sector investors. The ability to recycle non-tire rubber scrap could conserve as much as 90,000 Btu/lb, thus yielding an estimated energy savings potential of about 0.25 quad/yr.« less

Cultured meat: every village its own factory?

PubMed

van der Weele, Cor; Tramper, Johannes

2014-06-01

Rising global demand for meat will result in increased environmental pollution, energy consumption, and animal suffering. Cultured meat, produced in an animal-cell cultivation process, is a technically feasible alternative lacking these disadvantages, provided that an animal-component-free growth medium can be developed. Small-scale production looks particularly promising, not only technologically but also for societal acceptance. Economic feasibility, however, emerges as the real obstacle. Copyright © 2014 Elsevier Ltd. All rights reserved.

Acquiring Data by Mining the Past: Pairing Communities with Environmental Monitoring Methods through Open Online Collaborative Replication

NASA Astrophysics Data System (ADS)

Lippincott, M.; Lewis, E. S.; Gehrke, G. E.; Wise, A.; Pyle, S.; Sinatra, V.; Bland, G.; Bydlowski, D.; Henry, A.; Gilberts, P. A.

2016-12-01

Community groups are interested in low-cost sensors to monitor their environment. However, many new commercial sensors are unknown devices without peer-reviewed evaluations of data quality or pathways to regulatory acceptance, and the time to achieve these outcomes may be beyond a community's patience and attention. Rather than developing a device from scratch or validating a new commercial product, a workflow is presented whereby existing technologies, especially those that are out of patent, are replicated through open online collaboration between communities affected by environmental pollution, volunteers, academic institutions, and existing open hardware and open source software projects. Technology case studies will be presented, focusing primarily on a passive PM monitor based on the UNC Passive Monitor. Stages of the project will be detailed moving from identifying community needs, reviewing existing technology, partnership development, technology replication, IP review and licensing, data quality assurance (in process), and field evaluation with community partners (in process), with special attention to partnership development and technology review. We have leveraged open hardware and open source software to lower the cost and access barriers of existing technologies for PM10-2.5 and other atmospheric measures that have already been validated through peer review. Existing validation of and regulatory familiarity with a technology enables a rapid pathway towards collecting data, shortening the time it takes for communities to leverage data in environmental management decisions. Online collaboration requires rigorous documentation that aids in spreading research methods and promoting deep engagement by interested community researchers outside academia. At the same time, careful choice of technology and the use of small-scale fabrication through laser cutting, 3D printing, and open, shared repositories of plans and software enables educational engagement that broadens a project's reach.

Status of NASA High-Speed Research Program

NASA Technical Reports Server (NTRS)

Whitehead, Allen H., Jr.

1998-01-01

This paper provides an overview of the NASA High-Speed Research (HSR) Program dedicated to establishing the technology foundation to support the US transport industry's decision for an environmentally acceptable, economically viable 300 passenger, 5000 n.mi., Mach 2.4 aircraft. The HSR program, begun in 1990, is supported by a team of US aerospace companies. The international economic stakes are high. The projected market for more than 500 High-Speed Civil Transport (HSCT) airplanes introduced between the years 2000 and 2015 translates to more than $200 billion in aircraft sales, and the potential of 140,000 new jobs. The paper addresses the history of supersonic commercial air transportation beginning with the Concorde and TU-144 developments in the early 1960 time period. The technology goals for the HSR program are derived from market study results, projections on environmental requirements, and technical goals for each discipline area referenced to the design and operational features of the Concorde. Progress since the inception of the program is reviewed and a summary of some of the lessons learned will be highlighted. An outline is presented of the remaining technological challenges. Emphasis in this paper will be on the traditional aeronautical technologies that lead to higher performance to ensure economic viability. Specific discussion will center around aerodynamic performance, flight deck research, materials and structures development and propulsion systems. The environmental barriers to the HSCT and that part of the HSR program that addresses those technologies are reviewed and assessed in a companion paper.

[The Technology Acceptance Model and Its Application in a Telehealth Program for the Elderly With Chronic Illnesses].

PubMed

Chang, Chi-Ping

2015-06-01

Many technology developments hold the potential to improve the quality of life of people and make life easier and more comfortable. New technologies have been well accepted by most people. Information sharing in particular is a major catalyst of change in our current technology-based society. Technology has widely innovated life and drastically changed lifestyles. The Technology Acceptance Model (TAM), a model developed to address the rapid advances in computer technology, is used to explain and predict user acceptance of new information technology. In the past, businesses have used the TAM as an assessment tool to predict user acceptance when introducing new technology products. They have also used external factors in the model to influence user perceptions and beliefs and to ensure the successful spread of new technologies. Informatization plays a critical role in healthcare services. Due to the rapid aging of populations and upward trends in the incidence of chronic illness, requirements for long-term care have increased in both quality and quantity. Therefore, there has been an increased emphasis on integrating healthcare and information technology. However, most elderly are significantly less adept at technology use than the general population. Therefore, we reexamined the effect that the essential concepts in a TAM exerted on technology acceptance. In the present study, the technology acceptance experience with regard to telehealth of the elderly was used as an example to explain how the revised technology acceptance model (TAM 2) may be effectively applied to enhance the understanding of technology care among nurses. The results may serve as a reference for future research on healthcare-technology use in long-term care or in elderly populations.

Technological Diffusion within Educational Institutions: Applying the Technology Acceptance Model.

ERIC Educational Resources Information Center

Wolski, Stacy; Jackson, Sally

Expectancy models of behavior such as the Theory of Reasoned Action (TRA) and the Technology Acceptance Model (TAM) offer guidelines that aid efforts to facilitate use of new technology. These models remind us that both acceptance of and resistance to technology use are grounded in beliefs and norms regarding the technology. Although TAM is widely…

Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

ERIC Educational Resources Information Center

Yousif, Wael K.

2010-01-01

This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

Understanding the Influence of Perceived Usability and Technology Self-Efficacy on Teachers' Technology Acceptance

ERIC Educational Resources Information Center

Holden, Heather; Rada, Roy

2011-01-01

The Technology Acceptance Model (TAM) represents how users come to accept and use a given technology and can be applied to teachers' use of educational technologies. Here the model is extended to incorporate teachers' perceived usability and self-efficacy measures toward the technologies they are currently using. The authors administered a survey…

Practical measures for reducing the risk of environmental contamination in shale energy production.

PubMed

Ziemkiewicz, Paul; Quaranta, John D; McCawley, Michael

2014-07-01

Gas recovery from shale formations has been made possible by advances in horizontal drilling and hydraulic fracturing technology. Rapid adoption of these methods has created a surge in natural gas production in the United States and increased public concern about its environmental and human health effects. We surveyed the environmental literature relevant to shale gas development and studied over fifteen well sites and impoundments in West Virginia to evaluate pollution caused by air emissions, light and noise during drilling. Our study also characterized liquid and solid waste streams generated by drilling and hydraulic fracturing and evaluated the integrity of impoundments used to store fluids produced by hydraulic fracturing. While most shale gas wells are completed with little or no environmental contamination, we found that many of the problems associated with shale gas development resulted from inattention to accepted engineering practices such as impoundment construction, improper liner installation and a lack of institutional controls. Recommendations are provided based on the literature and our field studies. They will address not all but a great many of the deficiencies that result in environmental release of contaminants from shale gas development. We also identified areas where new technologies are needed to fully address contaminant releases to air and water.

42 CFR 137.285 - Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter...

Code of Federal Regulations, 2011 CFR

2011-10-01

...-Governance Tribes required to accept Federal environmental responsibilities to enter into a construction... 42 Public Health 1 2011-10-01 2011-10-01 false Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter into a construction project agreement? 137.285 Section 137...

A Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Brennan T.; Welch, Tim; Witt, Adam M.

The Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology (MYRP) presents a strategy for specifying, designing, testing, and demonstrating the efficacy of standard modular hydropower (SMH) as an environmentally compatible and cost-optimized renewable electricity generation technology. The MYRP provides the context, background, and vision for testing the SMH hypothesis: if standardization, modularity, and preservation of stream functionality become essential and fully realized features of hydropower technology, project design, and regulatory processes, they will enable previously unrealized levels of new project development with increased acceptance, reduced costs, increased predictability of outcomes, and increased value to stakeholders.more » To achieve success in this effort, the MYRP outlines a framework of stakeholder-validated criteria, models, design tools, testing facilities, and assessment protocols that will facilitate the development of next-generation hydropower technologies.« less

Entering a world of uncertainty: community nurses' engagement with information and communication technology.

PubMed

Courtney-Pratt, Helen; Cummings, Elizabeth; Turner, Paul; Cameron-Tucker, Helen; Wood-Baker, Richard; Walters, Eugene Haydn; Robinson, Andrew Lyle

2012-11-01

Achieving adoption, use, and integration of information and communication technology by healthcare clinicians in the workplace is recognized as a challenge that requires a multifaceted approach. This article explores community health nurses' engagement with information and communication technology as part of a larger research project that investigated the delivery of self-management support to people with chronic obstructive pulmonary disease. Following a survey of computer skills, participants were provided with computer training to support use of the project information system. Changes in practice were explored using action research meetings and individual semistructured interviews. Results highlight three domains that affected nurses' acceptance, utilization, and integration of information and communication technology into practice; environmental issues; factors in building capacity, confidence, and trust in the technology; and developing competence. Nurses face individual and practice challenges when attempting to integrate new processes into work activities, and the use of participatory models to support adoption is recommended.

Liquid fuel supplies

NASA Astrophysics Data System (ADS)

Perry, H.

1980-06-01

This paper presents an overview of United States and world petroleum, natural gas, and natural gas liquids presumed recoverable but as yet undiscovered resources and suggests that the depletion of these fuels may not occur as quickly as frequently predicted. The paper points out that the construction of a synthetic fuels industry will be very costly and will provide only a small amount of increased energy independence. The fear is expressed that haste in accepting a specific synfuels process on the basis of present technology may serve to forestall the development of a better technology. The paper suggests that we construct relatively few plants now each using a different technology in order to gain better understanding of the various technologies, more information on costs and the essential but as yet unknown information on environmental and socioeconomic effects of large scale plants.

Modelling assistive technology adoption for people with dementia.

PubMed

Chaurasia, Priyanka; McClean, Sally I; Nugent, Chris D; Cleland, Ian; Zhang, Shuai; Donnelly, Mark P; Scotney, Bryan W; Sanders, Chelsea; Smith, Ken; Norton, Maria C; Tschanz, JoAnn

2016-10-01

Assistive technologies have been identified as a potential solution for the provision of elderly care. Such technologies have in general the capacity to enhance the quality of life and increase the level of independence among their users. Nevertheless, the acceptance of these technologies is crucial to their success. Generally speaking, the elderly are not well-disposed to technologies and have limited experience; these factors contribute towards limiting the widespread acceptance of technology. It is therefore important to evaluate the potential success of technologies prior to their deployment. The research described in this paper builds upon our previous work on modelling adoption of assistive technology, in the form of cognitive prosthetics such as reminder apps and aims at identifying a refined sub-set of features which offer improved accuracy in predicting technology adoption. Consequently, in this paper, an adoption model is built using a set of features extracted from a user's background to minimise the likelihood of non-adoption. The work is based on analysis of data from the Cache County Study on Memory and Aging (CCSMA) with 31 features covering a range of age, gender, education and details of health condition. In the process of modelling adoption, feature selection and feature reduction is carried out followed by identifying the best classification models. With the reduced set of labelled features the technology adoption model built achieved an average prediction accuracy of 92.48% when tested on 173 participants. We conclude that modelling user adoption from a range of parameters such as physical, environmental and social perspectives is beneficial in recommending a technology to a particular user based on their profile. Copyright © 2016 Elsevier Inc. All rights reserved.

A model for choosing an automated ultraviolet-C disinfection system and building a case for the C-suite: Two case reports.

PubMed

Spencer, Maureen; Vignari, Michelle; Bryce, Elizabeth; Johnson, Helen Boehm; Fauerbach, Loretta; Graham, Denise

2017-03-01

Environmental disinfection has become the new frontier in the ongoing battle to reduce the risk of health care-associated infections. Evidence demonstrating the persistent contamination of environmental surfaces despite traditional cleaning and disinfection methods has led to the widespread acceptance that there is both a need for reassessing traditional cleaning protocols and for using secondary disinfection technologies. Ultraviolet-C (UV-C) disinfection is one type of no-touch technology shown to be a successful adjunct to manual cleaning in reducing environmental bioburden. The dilemma for the infection preventionist, however, is how to choose the system best suited for their facility among the many UV-C surface disinfection delivery systems available and how to build a case for acquisition to present to the hospital administration/C-suite. This article proposes an approach to these dilemmas based in part on the experience of 2 health care networks. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Examining the technology acceptance for dismantling of waste printed circuit boards in light of recycling and environmental concerns.

PubMed

Duan, Huabo; Hou, Kun; Li, Jinhui; Zhu, Xiaodong

2011-03-01

The dismantling of printed circuit board assemblies (PCBAs) and the recovery of their useful materials can lead to serious environmental impacts mainly due to their complicated physical structure and the variety of toxic elements contained in their material composition. So far, less attention has been paid to their responsible recycling compared to that of bare printed circuit boards. Combined with other materials recovery process, proper dismantling of PCBAs is beneficial to conserve scarce resources, reuse the components, and eliminate or safely dispose of hazardous materials. In analyzing the generation, resources potential and hazardous risk of scrap PCBAs, technologies used for the dismantling of waste PCBAs have been widely investigated and reviewed from the aspects of both industrial application and laboratory-scale studies. In addition, the feasibility of PCBA dismantling has been discussed, the determinants of which, including the heating conditions and mechanical properties have been identified. Moreover, this paper evaluates the environmental consequences caused by the dismantling of PCBAs. Copyright © 2010 Elsevier Ltd. All rights reserved.

Bridging the Gap between Social Acceptance and Ethical Acceptability.

PubMed

Taebi, Behnam

2017-10-01

New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

The three main monotheistic religions and gm food technology: an overview of perspectives

PubMed Central

2009-01-01

Background Public acceptance of genetically modified crops is partly rooted in religious views. However, the views of different religions and their potential influence on consumers' decisions have not been systematically examined and summarized in a brief overview. We review the positions of the Judaism, Islam and Christianity – the three major monotheistic religions to which more than 55% of humanity adheres to – on the controversies aroused by GM technology. Discussion The article establishes that there is no overarching consensus within the three religions. Overall, however, it appears that mainstream theology in all three religions increasingly tends towards acceptance of GM technology per se, on performing GM research, and on consumption of GM foods. These more liberal approaches, however, are predicated on there being rigorous scientific, ethical and regulatory scrutiny of research and development of such products, and that these products are properly labeled. Summary We conclude that there are several other interests competing with the influence exerted on consumers by religion. These include the media, environmental activists, scientists and the food industry, all of which function as sources of information and shapers of perception for consumers. PMID:19698118

An environmental decision framework applied to marine engine control technologies.

PubMed

Corbett, James J; Chapman, David

2006-06-01

This paper develops a decision framework for considering emission control technologies on marine engines, informed by standard decision theory, with an open structure that may be adapted by operators with specific vessel and technology attributes different from those provided here. Attributes relate objectives important to choosing control technologies with specific alternatives that may meet several of the objectives differently. The transparent framework enables multiple stakeholders to understand how different subjective judgments and varying attribute properties may result in different technology choices. Standard scoring techniques ensure that attributes are not biased by subjective scoring and that weights are the primary quantitative input where subjective preferences are exercised. An expected value decision structure is adopted that considers probabilities (likelihood) that a given alternative can meet its claims; alternative decision criteria are discussed. Capital and annual costs are combined using a net present value approach. An iterative approach is advocated that allows for screening and disqualifying alternatives that do not meet minimum conditions for acceptance, such as engine warranty or U.S. Coast Guard requirements. This decision framework assists vessel operators in considering explicitly important attributes and in representing choices clearly to other stakeholders concerned about reducing air pollution from vessels. This general decision structure may also be applied similarly to other environmental controls in marine applications.

Application of GIS technology in public health: successes and challenges.

PubMed

Fletcher-Lartey, Stephanie M; Caprarelli, Graziella

2016-04-01

The uptake and acceptance of Geographic Information Systems (GIS) technology has increased since the early 1990s and public health applications are rapidly expanding. In this paper, we summarize the common uses of GIS technology in the public health sector, emphasizing applications related to mapping and understanding of parasitic diseases. We also present some of the success stories, and discuss the challenges that still prevent a full scope application of GIS technology in the public health context. Geographical analysis has allowed researchers to interlink health, population and environmental data, thus enabling them to evaluate and quantify relationships between health-related variables and environmental risk factors at different geographical scales. The ability to access, share and utilize satellite and remote-sensing data has made possible even wider understanding of disease processes and of their links to the environment, an important consideration in the study of parasitic diseases. For example, disease prevention and control strategies resulting from investigations conducted in a GIS environment have been applied in many areas, particularly in Africa. However, there remain several challenges to a more widespread use of GIS technology, such as: limited access to GIS infrastructure, inadequate technical and analytical skills, and uneven data availability. Opportunities exist for international collaboration to address these limitations through knowledge sharing and governance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hyman, E.L.

Efforts at promoting more fuel-efficient charcoal stoves to replace traditional charcoal stoves in Kenya offer some lessons for the dissemination of appropriate technologies. This paper looks at the market-based approach which has made the Kenyan charcoal stoves project a success. Trends in woodfuels (wood and charcoal) consumption in Kenya are identified; the traditional technology for charcoal combustion and the upgraded traditional technologies are described; production achievement and the dissemination and promotion strategy used are examined; and a financial and economic analysis is performed with social, health and environmental effects assessed. Other ways to achieve a more favourable balance between woodfuelsmore » consumption and supply are then discussed looking at more efficient charcoal kilns and household woodstoves, improved institutional stoves and increased wood production. The replication potential of the Kenya experiment in other countries is also explored. The lessons learnt from the the Kenya experience concern the relationship between technology, choice and delivery systems as they interact with, economic, institutional, and policy factors. In this case, the design work accepted the traditional technology as a starting point which helped ensure widespread acceptance by households. The potential desirability of relying on local artisans to manufacture consumer durables using existing private sector channels to market these goods is also shown. It also highlights the importance of going beyond a laissez-faire approach and supporting training, demonstration, and publicity to faciliate the workings of the private sector. In the Kenyan case, technology choice was relatively unsubsidized and left ot the preferences of consumers.« less

A Qualitative Case Study to Investigate the Technology Acceptance Experience Outlined in the TAM Using the Kubler-Ross Stages of Grieving and Acceptance

ERIC Educational Resources Information Center

Sotelo, Benjamin Eladio

2015-01-01

The Technology Acceptance Model (TAM) has been an important model for the understanding of end user acceptance regarding technology and a framework used in thousands of researched scenarios since publication in 1986. Similarly, the Kubler-Ross model of death and dying has also been used as a model for the study of acceptance within the medical…

47 CFR 51.230 - Presumption of acceptability for deployment of an advanced services loop technology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... an advanced services loop technology. 51.230 Section 51.230 Telecommunication FEDERAL COMMUNICATIONS... Carriers § 51.230 Presumption of acceptability for deployment of an advanced services loop technology. (a) An advanced services loop technology is presumed acceptable for deployment under any one of the...

University Student Perceptions of Technology Use in Mathematics Learning

ERIC Educational Resources Information Center

Zogheib, Bashar; Rabaa'i, Ahmad; Zogheib, Salah; Elsaheli, Ali

2015-01-01

Although most universities and educators are relying on implementing various technological tools in the curriculum, acceptance of such tools among students is still not sufficient. The Technology Acceptance Model (TAM) has been widely used by researchers to test user's acceptance of technology in business, education and other domains. This…

The Acceptance of Computer Technology by Teachers in Early Childhood Education

ERIC Educational Resources Information Center

Jeong, Hye In; Kim, Yeolib

2017-01-01

This study investigated kindergarten teachers' decision-making process regarding the acceptance of computer technology. We incorporated the Technology Acceptance Model framework, in addition to computer self-efficacy, subjective norm, and personal innovativeness in education technology as external variables. The data were obtained from 160…

Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China.

PubMed

Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G L; Liu, Renzhi

2017-04-20

Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21-40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents.

Applying the Extended Technology Acceptance Model to the Use of Clickers in Student Learning: Some Evidence from Macroeconomics Classes

ERIC Educational Resources Information Center

Wu, Xiaoyu; Gao, Yuan

2011-01-01

This paper applies the extended technology acceptance model (exTAM) in information systems research to the use of clickers in student learning. The technology acceptance model (TAM) posits that perceived ease of use and perceived usefulness of technology influence users' attitudes toward using and intention to use technology. Research subsequent…

Assessment of the Acceptability and Feasibility of Child Potties for Safe Child Feces Disposal in Rural Bangladesh.

PubMed

Hussain, Faruqe; Luby, Stephen P; Unicomb, Leanne; Leontsini, Elli; Naushin, Tania; Buckland, Audrey J; Winch, Peter J

2017-08-01

Indiscriminate defecation among young children and the unsafe disposal of their feces increases fecal contamination in the household environment and the risk of diarrheal disease transmission. Improved sanitary technology for children too young to use a latrine may facilitate safe feces disposal and reduce fecal contamination in the household environment. We assessed the acceptability and feasibility of child potties in rural Bangladesh in 2010. Our team introduced child potties into 26 households for 30 days, and conducted semistructured interviews, group discussions, and observations to assess the acceptability and feasibility of their use for parents and children. Residents of this rural Bangladeshi community accepted the child potties and caregivers found them to be a feasible means of managing child feces. The color, shape, design, and size of the potty influenced its acceptability and use. These residents reported that regular use of the potty improved the household's physical environment and caregiver and child personal hygiene. Regular potty use also reduced caregivers' work load by making feces collection and disposal easier. Primary caregivers viewed 4-6 months as the appropriate age to initiate potty training. Sanitation interventions should integrate and emphasize potties for children's feces management to reduce household environmental contamination.

Environmental monitoring handbook for coal conversion facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salk, M.S.; DeCicco, S.G.

1978-05-01

The primary objectives of the Department of Energy's (DOE) coal conversion program are to demonstrate the environmental acceptability, technical feasibility, and economic viability of various technologies for gaseous, liquid, and solid fuels from coal. The Environmental Monitoring Handbook for Coal Conversion Facilities will help accomplish the objective of environmental acceptability by guiding the planning and execution of socioeconomic and environmental monitoring programs for demonstration facilities. These programs will provide information adequate to (1) predict, insofar as is possible, the potential impacts of construction and operation of a coal conversion plant, (2) verify the occurrence of these or any other impactsmore » during construction and operation, (3) determine the adequacy of mitigating measures to protect the environment, (4) develop effluent source terms for process discharges, and (5) determine the effectiveness of pollution control equipment. Although useful in a variety of areas, the handbook is intended primarily for contractors who, as industrial partners with DOE, are building coal conversion plants. For the contractor it is a practical guide on (1) the methodology for developing site- and process-specific environmental monitoring programs, (2) state-of-the-art sampling and analytical techniques, and (3) impact analyses.To correspond to the phases of project activity, the subject matter is divided into four stages of monitoring: (1) a reconnaissance or synoptic survey, (2) preconstruction or baseline, (3) construction, and (4) operation, including process monitoring (prepared by Radian Corp., McLean, Va.). For each stage of monitoring, guidelines are given on socioeconomics, aquatic and terrestrial ecology, air quality and meteorology, surface and groundwater quality, geohydrology and soil survey, and surface water hydrology.« less

Information and Communications Technology Acceptance among Malaysian Adolescents in Urban Poverty

ERIC Educational Resources Information Center

Halili, Siti Hajar; Sulaiman, Hamidah; Razak, Rafiza Abdul

2017-01-01

This study was conducted to identify the information communication and technology (ICT) usage among adolescents in urban poverty and their acceptance of using ICT in teaching and learning (T&L) process. The Technology Acceptance Model was used in determining the acceptance of ICT by focusing on factors such as perceived ease of use and…

Sensors for Environmental Control

NASA Technical Reports Server (NTRS)

1996-01-01

Under a Kennedy Space Center Small Business Innovation Research contract, GEO-CENTERS, Inc. developed a sensing element or 'optrode,' which NASA needed for space life support research to measure a hydroponic culture's pH factor. The company then commercialized the technology in the PC Based pH Monitoring System. The system employs the optrode to enable long term continuous monitoring of the pH level of fluids in standing and flowing conditions, an optoelectronic board with light sensors and detectors that fits into a desktop computer, and a fiber optic cable that connects the two. The system is effective in monitoring the pH output of industries to maintain ranges acceptable to the Environmental Protection Agency.

A Comprehensive Tool for Exploring the Availability, Scalability and Growth Potential of Conventional and Renewable Energy Sources and Technologies

NASA Astrophysics Data System (ADS)

Jack-Scott, E.; Arnott, J. C.; Katzenberger, J.; Davis, S. J.; Delman, E.

2015-12-01

It has been a generational challenge to simultaneously meet the world's energy requirements, while remaining within the bounds of acceptable cost and environmental impact. To this end, substantial research has explored various energy futures on a global scale, leaving decision-makers and the public overwhelmed by information on energy options. In response, this interactive energy table was developed as a comprehensive resource through which users can explore the availability, scalability, and growth potentials of all energy technologies currently in use or development. Extensive research from peer-reviewed papers and reports was compiled and summarized, detailing technology costs, technical considerations, imminent breakthroughs, and obstacles to integration, as well as political, social, and environmental considerations. Energy technologies fall within categories of coal, oil, natural gas, nuclear, solar, wind, hydropower, ocean, geothermal and biomass. In addition to 360 expandable cells of cited data, the interactive table also features educational windows with background information on each energy technology. The table seeks not to advocate for specific energy futures, but to succinctly and accurately centralize peer-reviewed research and information in an interactive, accessible resource. With this tool, decision-makers, researchers and the public alike can explore various combinations of energy technologies and their quantitative and qualitative attributes that can satisfy the world's total primary energy supply (TPES) while making progress towards a near zero carbon future.

Educational Technology Acceptance across National and Professional Cultures: A European Study

ERIC Educational Resources Information Center

Nistor, Nicolae; Gögüs, Aytaç; Lerche, Thomas

2013-01-01

The continuous development of new platforms and environments for technology-enhanced learning emphasizes the increasing importance of research in educational technology acceptance (ETA). Responding to this need, the unified theory of acceptance and use of technology (UTAUT) proposes a major ETA model. However, the UTAUT has been so far validated…

Knowledge Sharing and Educational Technology Acceptance in Online Academic Communities of Practice

ERIC Educational Resources Information Center

Nistor, Nicolae; Baltes, Beate; Schustek, Monika

2012-01-01

Purpose: Online programs rely on the use of educational technology for knowledge sharing in academic virtual communities of practice (vCoPs). This poses the question as to which factors influence technology acceptance. Previous research has investigated the inter-relationship between educational technology acceptance (ETA) and the vCoP context…

An Integrated Approach for Preservice Teachers' Acceptance and Use of Technology: UTAUT-PST Scale

ERIC Educational Resources Information Center

Kabakçi-Yurdakul, Isil; Ursavas, Ömer Faruk; Becit-Isçitürk, Gökçe

2014-01-01

Problem Statement: In educational systems, teachers and preservice teachers are the keys to the effective use of technology in the teaching and learning processes. Predicting teachers' technology acceptance and use remains an important issue. Models and theories have been developed to explain and predict technology acceptance. The Unified Theory…

A Quantitative Assessment of the Factors that Influence Technology Acceptance in Emergency Response

ERIC Educational Resources Information Center

Seiter, Thomas C.

2012-01-01

Traditional models for studying user acceptance and adoption of technology focused on the factors that identify and tested the relationships forged between the user and the technology in question. In emergency response, implementing technology without user acceptance may affect the safety of the responders and citizenry. Integrating the factors…

Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

ERIC Educational Resources Information Center

Konak, Abdullah; Kulturel-Konak, Sadan; Nasereddin, Mahdi; Bartolacci, Michael R.

2017-01-01

Aim/Purpose: This paper utilizes the Technology Acceptance Model (TAM) to examine the extent to which acceptance of Remote Virtual Computer Laboratories (RVCLs) is affected by students' technological backgrounds and the role of collaborative work. Background: RVCLs are widely used in information technology and cyber security education to provide…

Technology Acceptance of Electronic Medical Records by Nurses

ERIC Educational Resources Information Center

Stocker, Gary

2010-01-01

The purpose of this study was to evaluate the Technology Acceptance Model's (TAM) relevance of the intention of nurses to use electronic medical records in acute health care settings. The basic technology acceptance research of Davis (1989) was applied to the specific technology tool of electronic medical records (EMR) in a specific setting…

E-Book Acceptance among Undergraduate Students: A Look at the Moderating Role of Technology Innovativeness

ERIC Educational Resources Information Center

Ngafeeson, Madison N.; Sun, Jun

2015-01-01

This paper utilizes the technology acceptance model (TAM) to uncover the moderating roles of technology innovativeness. A study of 158 undergraduate students revealed that the original TAM constructs and relationships were reliable, supported, and applicable in the measurement of e-book acceptance. Interestingly, personal technology innovativeness…

Current, future and potential use of mobile and wearable technologies and social media data in the ABCD study to increase understanding of contributors to child health.

PubMed

Bagot, K S; Matthews, S A; Mason, M; Squeglia, Lindsay M; Fowler, J; Gray, K; Herting, M; May, A; Colrain, I; Godino, J; Tapert, S; Brown, S; Patrick, K

2018-08-01

Mobile and wearable technologies and novel methods of data collection are innovating health-related research. These technologies and methods allow for multi-system level capture of data across environmental, physiological, behavioral, and psychological domains. In the Adolescent Brain Cognitive Development (ABCD) Study, there is great potential for harnessing the acceptability, accessibility, and functionality of mobile and social technologies for in-vivo data capture to precisely measure factors, and interactions between factors, that contribute to childhood and adolescent neurodevelopment and psychosocial and health outcomes. Here we discuss advances in mobile and wearable technologies and methods of analysis of geospatial, ecologic, social network and behavioral data. Incorporating these technologies into the ABCD study will allow for interdisciplinary research on the effects of place, social interactions, environment, and substance use on health and developmental outcomes in children and adolescents. Copyright © 2018. Published by Elsevier Ltd.

Oil shale development and its environmental considerations

USGS Publications Warehouse

Stone, R.T.; Johnson, H.; Decora, A.

1974-01-01

The petroleum shortage recently experienced by many nations throughout the world has created an intense interest in obtaining new and supplemental energy sources. In the United States, this interest has been centered on oil shale. Any major action by the federal government having significant environmental effects requires compliance with the National Environmental Policy Act of 1969 (NEPA). Since most oil shale is found on federal lands, and since its development involves significant environmental impacts, leasing oil shale lands to private interests must be in compliance with NEPA. For oil shale, program planning began at approximately the same time that NEPA was signed into law. By structuring the program to permit a resource and technological inventory by industry and the federal agencies, the Department of the Interior was able simultaneously to conduct the environmental assessments required by the act. This required: 1. Clearly defined program objections; 2. An organization which could integrate public policy with diverse scientific disciplines and environmental concerns; and 3. Flexible decisionmaking to adjust to policy changes as well as to evolving interpretations on EPA as clarified by court decisions. This paper outlines the program, the organization structure that was created for this specific task, and the environmental concerns which were investigated. The success of the program has been demonstrated by meeting the requirements of NEPA, without court challenge, and by industry's acceptance of a leasing program that included the most stringent environmental protection provisions ever required. The need for energy development has spurred the acceptance of the program. However, by its awareness and willingness to meet the environmental challenges of the future, industry has shown a reasonable understanding of its commitments. The pros and cons of development were publicly considered in hearings and analyzed in the final environmental statement. This action aided greatly in preventing legal challenges. The prototype oil shale program is now under way and this new energy source, developed with strict environmental safeguards, may soon be available to our nation.

Explain the Behavior Intention to Use e-Learning Technologies: A Unified Theory of Acceptance and Use of Technology Perspective

ERIC Educational Resources Information Center

Shaqrah, Amin A.

2015-01-01

The purpose of this study is to explain the behavior intention to use e-learning technologies. In order to achieve a better view and validate the study, researcher attempts to give details of how technology acceptance models help Jordanian trainees firms in accepting e-learning technology, and how if applied will result more attention to usage…

Major psychological factors affecting acceptance of gene-recombination technology.

PubMed

Tanaka, Yutaka

2004-12-01

The purpose of this study was to verify the validity of a causal model that was made to predict the acceptance of gene-recombination technology. A structural equation model was used as a causal model. First of all, based on preceding studies, the factors of perceived risk, perceived benefit, and trust were set up as important psychological factors determining acceptance of gene-recombination technology in the structural equation model. An additional factor, "sense of bioethics," which I consider to be important for acceptance of biotechnology, was added to the model. Based on previous studies, trust was set up to have an indirect influence on the acceptance of gene-recombination technology through perceived risk and perceived benefit in the model. Participants were 231 undergraduate students in Japan who answered a questionnaire with a 5-point bipolar scale. The results indicated that the proposed model fits the data well, and showed that acceptance of gene-recombination technology is explained largely by four factors, that is, perceived risk, perceived benefit, trust, and sense of bioethics, whether the technology is applied to plants, animals, or human beings. However, the relative importance of the four factors was found to vary depending on whether the gene-recombination technology was applied to plants, animals, or human beings. Specifically, the factor of sense of bioethics is the most important factor in acceptance of plant gene-recombination technology and animal gene-recombination technology, and the factors of trust and perceived risk are the most important factors in acceptance of human being gene-recombination technology.

Factors Affecting Acceptance & Use of ReWIND: Validating the Extended Unified Theory of Acceptance and Use of Technology

ERIC Educational Resources Information Center

Nair, Pradeep Kumar; Ali, Faizan; Leong, Lim Chee

2015-01-01

Purpose: This study aims to explain the factors affecting students' acceptance and usage of a lecture capture system (LCS)--ReWIND--in a Malaysian university based on the extended unified theory of acceptance and use of technology (UTAUT2) model. Technological advances have become an important feature of universities' plans to improve the…

Factors Affecting Students' Acceptance of Tablet PCs: A Study in Italian High Schools

ERIC Educational Resources Information Center

Cacciamani, Stefano; Villani, Daniela; Bonanomi, Andrea; Carissoli, Claudia; Olivari, Maria Giulia; Morganti, Laura; Riva, Giuseppe; Confalonieri, Emanuela

2018-01-01

To maximize the advantages of the tablet personal computer (TPC) at school, this technology needs to be accepted by students as new tool for learning. With reference to the Technology Acceptance Model and the Unified Theory of Acceptance and Use of Technology, the aims of this study were (a) to analyze factors influencing high school students'…

Extending the Technology Acceptance Model to Explore the Intention to Use Second Life for Enhancing Healthcare Education

ERIC Educational Resources Information Center

Chow, Meyrick; Herold, David Kurt; Choo, Tat-Ming; Chan, Kitty

2012-01-01

Learners need to have good reasons to engage and accept e-learning. They need to understand that unless they do, the outcomes will be less favourable. The technology acceptance model (TAM) is the most widely recognized model addressing why users accept or reject technology. This study describes the development and evaluation of a virtual…

Progress Towards Environmentally Friendlier Automobiles

NASA Astrophysics Data System (ADS)

Culver, Robert

2002-03-01

The United States Council for Automotive Research (USCAR), the umbrella organization of DaimlerChrysler, Ford, and General Motors, has been conducting pre-competitive research in the areas of improving fuel efficiency and reducing tailpipe emissions. One of the major collaborations is with the U.S. Government in the Partnership for a New Generation of Vehicles (PNGV). The USCAR/PNGV technology portfolio includes lightweight materials, improved conventional internal combustion engine systems, electric traction and hybridization, and fuel cells. Significant progress has been made in developing these technologies and marketing them through today’s vehicles. New product announcements of hybrids demonstrate the commitment of the industry to bring the new technologies to market. Yet, breakthroughs and innovations will be required before many of the technologies can fully realize their promise. In addition, government policies and programs will be required to promote market acceptance and ensure an infrastructure to provide new fuels.

Large, horizontal-axis wind turbines

NASA Technical Reports Server (NTRS)

Linscott, B. S.; Perkins, P.; Dennett, J. T.

1984-01-01

Development of the technology for safe, reliable, environmentally acceptable large wind turbines that have the potential to generate a significant amount of electricity at costs competitive with conventional electric generating systems are presented. In addition, these large wind turbines must be fully compatible with electric utility operations and interface requirements. There are several ongoing large wind system development projects and applied research efforts directed toward meeting the technology requirements for utility applications. Detailed information on these projects is provided. The Mod-O research facility and current applied research effort in aerodynamics, structural dynamics and aeroelasticity, composite and hybrid composite materials, and multiple system interaction are described. A chronology of component research and technology development for large, horizontal axis wind turbines is presented. Wind characteristics, wind turbine economics, and the impact of wind turbines on the environment are reported. The need for continued wind turbine research and technology development is explored. Over 40 references are sited and a bibliography is included.

Effects of Cold Plasma on Food Quality: A Review.

PubMed

Pankaj, Shashi K; Wan, Zifan; Keener, Kevin M

2018-01-01

Cold plasma (CP) technology has proven very effective as an alternative tool for food decontamination and shelf-life extension. The impact of CP on food quality is very crucial for its acceptance as an alternative food processing technology. Due to the non-thermal nature, CP treatments have shown no or minimal impacts on the physical, chemical, nutritional and sensory attributes of various products. This review also discusses the negative impacts and limitations posed by CP technology for food products. The limited studies on interactions of CP species with food components at the molecular level offers future research opportunities. It also highlights the need for optimization studies to mitigate the negative impacts on visual, chemical, nutritional and functional properties of food products. The design versatility, non-thermal, economical and environmentally friendly nature of CP offers unique advantages over traditional processing technologies. However, CP processing is still in its nascent form and needs further research to reach its potential.

On feasibility of a closed nuclear power fuel cycle with minimum radioactivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrianova, E. A.; Davidenko, V. D.; Tsibulskiy, V. F., E-mail: Tsibulskiy-VF@nrcki.ru

2015-12-15

Practical implementation of a closed nuclear fuel cycle implies solution of two main tasks. The first task is creation of environmentally acceptable operating conditions of the nuclear fuel cycle considering, first of all, high radioactivity of the involved materials. The second task is creation of effective and economically appropriate conditions of involving fertile isotopes in the fuel cycle. Creation of technologies for management of the high-level radioactivity of spent fuel reliable in terms of radiological protection seems to be the hardest problem.

Fusion energy: Status and prospects

NASA Astrophysics Data System (ADS)

Salomaa, Rainer

A review of the present state of the international fusion research is given. In the largest tokamak devices (JET, TFTR, JT-60) fusion relevant temperatures are routinely obtained and the scientific feasibility of plasma confinement has been demonstrated. Plans concerning the next step are described. A critical view is presented on questions as to what extent the generic advantages of fusion (availability, sufficiency, safety, environmental acceptability, etc.) can be exploited in a practical power reactor where the formidable technological problems call for compromises.

The moving-ring field-reversed mirror prototype reactor

NASA Astrophysics Data System (ADS)

Smith, A. C., Jr.; Carlson, G. A.; Fleischmann, H. H.; Grossman, W., Jr.; Kammash, T.; Schultz, K. R.; Woodall, D. M.

1981-03-01

A prototype fusion reactor was designed based on magnetic field reversed plasma confinement. A set of physics, technology, and mechanical design criteria were developed in order to make this concept attractive. Six major criteria guide the commercial prototype design. The prototype must: (1) produce net electricity decisively P sub net 70% of P sub gross; (2) scale to an economical commercial plant and have small physical size; (3) have all features required of a correcial upgrade plant (H-3 breeding, etc.); (4) minimize exotic technology and maintenance complexity; (5) promise significantly lower safety hazards than fission plants (environmentally and socially acceptable); and (6) be modular in design to permit repetitive production of components.

Solid-state chemistry and particle engineering with supercritical fluids in pharmaceutics.

PubMed

Pasquali, Irene; Bettini, Ruggero; Giordano, Ferdinando

2006-03-01

The present commentary aims to review the modern and innovative strategies in particle engineering by the supercritical fluid technologies and it is principally concerned with the aspects of solid-state chemistry. Supercritical fluids based processes for particle production have been proved suitable for controlling solid-state, morphology and particle size of pharmaceuticals, in some cases on an industrial scale. Supercritical fluids should be considered in a prominent position in the development processes of drug products for the 21st century. In this respect, this innovative technology will help in meeting the more and more stringent requirements of regulatory authorities in terms of solid-state characterisation and purity, and environmental acceptability.

Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China

PubMed Central

Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G. L.; Liu, Renzhi

2017-01-01

Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21–40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents. PMID:28425956

OTM Machine Acceptance: In the Arab Culture

NASA Astrophysics Data System (ADS)

Rashed, Abdullah; Santos, Henrique

Basically, neglecting the human factor is one of the main reasons for system failures or for technology rejection, even when important technologies are considered. Biometrics mostly have the characteristics needed for effortless acceptance, such as easiness and usefulness, that are essential pillars of acceptance models such as TAM (technology acceptance model). However, it should be investigated. Many studies have been carried out to research the issues of technology acceptance in different cultures, especially the western culture. Arabic culture lacks these types of studies with few publications in this field. This paper introduces a new biometric interface for ATM machines. This interface depends on a promising biometrics which is odour. To discover the acceptance of this biometrics, we distributed a questionnaire via a web site and called for participation in the Arab Area and found that most respondents would accept to use odour.

An environmental, economic, and social assessment of improving cattle finishing weight or average daily gain within U.S. beef production.

PubMed

White, R R; Capper, J L

2013-12-01

The objective of this study was to assess environmental impact, economic viability, and social acceptability of 3 beef production systems with differing levels of efficiency. A deterministic model of U.S. beef production was used to predict the number of animals required to produce 1 × 10(9) kg HCW beef. Three production treatments were compared, 1 representing average U.S. production (control), 1 with a 15% increase in ADG, and 1 with a 15% increase in finishing weight (FW). For each treatment, various socioeconomic scenarios were compared to account for uncertainty in producer and consumer behavior. Environmental impact metrics included feed consumption, land use, water use, greenhouse gas emissions (GHGe), and N and P excretion. Feed cost, animal purchase cost, animal sales revenue, and income over costs (IOVC) were used as metrics of economic viability. Willingness to pay (WTP) was used to identify improvements or reductions in social acceptability. When ADG improved, feedstuff consumption, land use, and water use decreased by 6.4%, 3.2%, and 12.3%, respectively, compared with the control. Carbon footprint decreased 11.7% and N and P excretion were reduced by 4% and 13.8%, respectively. When FW improved, decreases were seen in feedstuff consumption (12.1%), water use (9.2%). and land use (15.5%); total GHGe decreased 14.7%; and N and P excretion decreased by 10.1% and 17.2%, compared with the control. Changes in IOVC were dependent on socioeconomic scenario. When the ADG scenario was compared with the control, changes in sector profitability ranged from 51 to 117% (cow-calf), -38 to 157% (stocker), and 37 to 134% (feedlot). When improved FW was compared, changes in cow-calf profit ranged from 67% to 143%, stocker profit ranged from -41% to 155% and feedlot profit ranged from 37% to 136%. When WTP was based on marketing beef being more efficiently produced, WTP improved by 10%; thus, social acceptability increased. When marketing was based on production efficiency and consumer knowledge of growth-enhancing technology use, WTP decreased by 12%-leading to a decrease in social acceptability. Results demonstrated that improved efficiency also improved environmental impact, but impacts on economic viability and social acceptability are highly dependent on consumer and producer behavioral responses to efficiency improvements.

Information technology acceptance in health information management.

PubMed

Abdekhoda, M; Ahmadi, M; Dehnad, A; Hosseini, A F

2014-01-01

User acceptance of information technology has been a significant area of research for more than two decades in the field of information technology. This study assessed the acceptance of information technology in the context of Health Information Management (HIM) by utilizing Technology Acceptance Model (TAM) which was modified and applied to assess user acceptance of health information technology as well as viability of TAM as a research construct in the context of HIM. This was a descriptive- analytical study in which a sample of 187 personnel from a population of 363 personnel, working in medical records departments of hospitals affiliated to Tehran University of Medical Sciences, was selected. Users' perception of applying information technology was studied by a researcher-developed questionnaire. Collected data were analyzed by SPSS software (version16) using descriptive statistics and regression analysis. The results suggest that TAM is a useful construct to assess user acceptance of information technology in the context of HIM. The findings also evidenced the perceived ease of use (PEOU) and perceived usefulness (PE) were positively associated with favorable users' attitudes towards HIM. PU was relatively more associated (r= 0.22, p = 0.05) than PEOU (r = 0.014, p = 0.05) with favorable user attitudes towards HIM. Users' perception of usefulness and ease of use are important determinants providing the incentive for users to accept information technologies when the application of a successful HIM system is attempted. The findings of the present study suggest that user acceptance is a key element and should subsequently be the major concern of health organizations and health policy makers.

Public Enlightenment Education on the Acceptance of Fingerprint Biometric Technology for Administration in Academic Institutions and Other Organizations

ERIC Educational Resources Information Center

Eze, Samuel Godwin; Chijioke, Edmond Ogochukwu

2016-01-01

This research presents the overview of the origin of fingerprint biometric technology, the opinion of the public on the acceptance of fingerprint biometric technology and the means of instilling confidence on the public for the total acceptance of the technology. Data was collected with the aid of a lecture and structured questionnaires…

Factors influencing acceptance of technology for aging in place: a systematic review.

PubMed

Peek, Sebastiaan T M; Wouters, Eveline J M; van Hoof, Joost; Luijkx, Katrien G; Boeije, Hennie R; Vrijhoef, Hubertus J M

2014-04-01

To provide an overview of factors influencing the acceptance of electronic technologies that support aging in place by community-dwelling older adults. Since technology acceptance factors fluctuate over time, a distinction was made between factors in the pre-implementation stage and factors in the post-implementation stage. A systematic review of mixed studies. Seven major scientific databases (including MEDLINE, Scopus and CINAHL) were searched. Inclusion criteria were as follows: (1) original and peer-reviewed research, (2) qualitative, quantitative or mixed methods research, (3) research in which participants are community-dwelling older adults aged 60 years or older, and (4) research aimed at investigating factors that influence the intention to use or the actual use of electronic technology for aging in place. Three researchers each read the articles and extracted factors. Sixteen out of 2841 articles were included. Most articles investigated acceptance of technology that enhances safety or provides social interaction. The majority of data was based on qualitative research investigating factors in the pre-implementation stage. Acceptance in this stage is influenced by 27 factors, divided into six themes: concerns regarding technology (e.g., high cost, privacy implications and usability factors); expected benefits of technology (e.g., increased safety and perceived usefulness); need for technology (e.g., perceived need and subjective health status); alternatives to technology (e.g., help by family or spouse), social influence (e.g., influence of family, friends and professional caregivers); and characteristics of older adults (e.g., desire to age in place). When comparing these results to qualitative results on post-implementation acceptance, our analysis showed that some factors are persistent while new factors also emerge. Quantitative results showed that a small number of variables have a significant influence in the pre-implementation stage. Fourteen out of the sixteen included articles did not use an existing technology acceptance framework or model. Acceptance of technology in the pre-implementation stage is influenced by multiple factors. However, post-implementation research on technology acceptance by community-dwelling older adults is scarce and most of the factors in this review have not been tested by using quantitative methods. Further research is needed to determine if and how the factors in this review are interrelated, and how they relate to existing models of technology acceptance. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Patients’ Acceptance of Smartphone Health Technology for Chronic Disease Management: A Theoretical Model and Empirical Test

PubMed Central

Dou, Kaili; Yu, Ping; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong

2017-01-01

Background Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. Objective The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients’ acceptance of smartphone health technology for chronic disease management. Methods Multiple theories and factors that may influence patients’ acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients’ acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients’ actual use of a smartphone health app. The partial least square method was used to test the theoretical model. Results The model accounted for .412 of the variance in patients’ intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients’ smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients’ intentions to use the technology. Age and gender had no significant influence on patients’ acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use and actual use of smartphone health apps for chronic disease management. Conclusions This study developed a theoretical model to predict patients’ acceptance of smartphone health technology for chronic disease management. Although resistance to change is a significant barrier to technology acceptance, careful management of doctor-patient relationship, and raising patients’ awareness of the negative effect of chronic disease can negate the effect of resistance and encourage acceptance and use of smartphone health technology to support chronic disease management for patients in the community. PMID:29212629

The technology acceptance model: predicting nurses' intention to use telemedicine technology (eICU).

PubMed

Kowitlawakul, Yanika

2011-07-01

The purposes of this study were to determine factors and predictors that influence nurses' intention to use the eICU technology, to examine the applicability of the Technology Acceptance Model in explaining nurses' intention to use the eICU technology in healthcare settings, and to provide psychometric evidence of the measurement scales used in the study. The study involved 117 participants from two healthcare systems. The Telemedicine Technology Acceptance Model was developed based on the original Technology Acceptance Model that was initially developed by Fred Davis in 1986. The eICU Acceptance Survey was used as an instrument for the study. Content validity was examined, and the reliability of the instrument was tested. The results show that perceived usefulness is the most influential factor that influences nurses' intention to use the eICU technology. The principal factors that influence perceived usefulness are perceived ease of use, support from physicians, and years working in the hospital. The model fit was reasonably adequate and able to explain 58% of the variance (R = 0.58) in intention to use the eICU technology with the nursing sample.

Technology Acceptance among Pre-Service Teachers: Does Gender Matter?

ERIC Educational Resources Information Center

Teo, Timothy; Fan, Xitao; Du, Jianxia

2015-01-01

This study examined possible gender differences in pre-service teachers' perceived acceptance of technology in their professional work under the framework of the technology acceptance model (TAM). Based on a sample of pre-service teachers, a series of progressively more stringent measurement invariance tests (configural, metric, and scalar…

The Impact of Iranian Teachers Cultural Values on Computer Technology Acceptance

ERIC Educational Resources Information Center

Sadeghi, Karim; Saribagloo, Javad Amani; Aghdam, Samad Hanifepour; Mahmoudi, Hojjat

2014-01-01

This study was conducted with the aim of testing the technology acceptance model and the impact of Hofstede cultural values (masculinity/femininity, uncertainty avoidance, individualism/collectivism, and power distance) on computer technology acceptance among teachers at Urmia city (Iran) using the structural equation modeling approach. From among…

Technology Acceptance in Social Work Education: Implications for the Field Practicum

ERIC Educational Resources Information Center

Colvin, Alex Don; Bullock, Angela N.

2014-01-01

The exponential growth and sophistication of new information and computer technology (ICT) have greatly influenced human interactions and provided new metaphors for understanding the world. The acceptance and integration of ICT into social work field education are examined here using the technological acceptance model. This article also explores…

[Nurses' Innovation Acceptance of Barcode Technology].

PubMed

Cheng, Hui-Ping; Lee, Ting-Ting; Liu, Chieh-Yu; Hou, I-Ching

2016-04-01

Healthcare organizations have increasingly adopted barcode technology to improve care quality and work efficiency. Barcode technology is simple to use, so it is frequently used in patient identification, medication administration, and specimen collection processes. This study used a technology acceptance model and innovation diffusion theory to explore the innovation acceptance of barcode technology by nurses. The data were collected using a structured questionnaire with open-ended questions that was based on the technology acceptance model and innovation diffusion theory. The questionnaire was distributed to and collected from 200 nurses from March to May 2014. Data on laboratory reporting times and specimen rejection rates were collected as well. Variables that were found to have a significant relationship (p<.001) with innovation acceptance included (in order of importance): perceived usefulness (r=.722), perceived ease of use (r=.720), observability (r=.579), compatibility (r=.364), and trialability (r=.344). N-level nurses demonstrated higher acceptance than their N1 and N2 level peers (F=3.95, p<.05). Further, the mean laboratory reporting time decreased 109 minutes (t=10.03, p<.05) and the mean specimen rejection rate decreased from 2.18% to 0.28%. The results revealed that barcode technology has been accepted by nurses and that this technology effectively decreases both laboratory reporting times and specimen rejection rates. However, network speed and workflow should be further improved in order to benefit clinical practice.

Environmental Control and Life Support System Reliability for Long-Duration Missions Beyond Lower Earth Orbit

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam J.; Nelson, Jason R.

2014-01-01

NASA has highlighted reliability as critical to future human space exploration, particularly in the area of environmental controls and life support systems. The Advanced Exploration Systems (AES) projects have been encouraged to pursue higher reliability components and systems as part of technology development plans. However, no consensus has been reached on what is meant by improving on reliability, or on how to assess reliability within the AES projects. This became apparent when trying to assess reliability as one of several figures of merit for a regenerable water architecture trade study. In the spring of 2013, the AES Water Recovery Project hosted a series of events at Johnson Space Center with the intended goal of establishing a common language and understanding of NASA's reliability goals, and equipping the projects with acceptable means of assessing the respective systems. This campaign included an educational series in which experts from across the agency and academia provided information on terminology, tools, and techniques associated with evaluating and designing for system reliability. The campaign culminated in a workshop that included members of the Environmental Control and Life Support System and AES communities. The goal of this workshop was to develop a consensus on what reliability means to AES and identify methods for assessing low- to mid-technology readiness level technologies for reliability. This paper details the results of that workshop.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marrocco, M.

The Ohio Power Company`s Tidd Pressurized Fluidized Bed Combined Cycle (PFBC) program continues to be the only operating PFBC demonstration program in the nation. The 70 MWe Tidd Demonstration Plant is a Round 1 Clean Coal Technology Project constructed to demonstrate the viability of PFBC combined cycle technology. The plant is now in Rs fourth year of operation. The technology has clearly demonstrated Rs ability to achieve sulfur capture of greater than 95%. The calcium to sulfur molar ratios have been demonstrated to exceed original projections. Unit availability has steadily increased and has been demonstrated to be competitive with othermore » technologies. The operating experience of the first forty-four months of testing has moved the PFBC process from a {open_quotes}promising technology{close_quotes} to available, proven option for efficient, environmentally acceptable base load generation. Funding for the $210 million program is provided by Ohio Power Company, The U.S. Department of Energy, The Ohio Coal Development Office, and the PFBC process vendors - Asea Brown Boveri Carbon (ABBC) and Babcock and Wilcox (B&W).« less

Noise Reduction Through Circulation Control

NASA Technical Reports Server (NTRS)

Munro, Scott E.; Ahuja, K. K.; Englar, Robert J.

2005-01-01

Circulation control technology uses tangential blowing around a rounded trailing edge or a leading edge to change the force and moment characteristics of an aerodynamic body. This technology has been applied to circular cylinders, wings, helicopter rotors, and even to automobiles for improved aerodynamic performance. Only limited research has been conducted on the acoustic of this technology. Since wing flaps contribute to the environmental noise of an aircraft, an alternate blown high lift system without complex mechanical flaps could prove beneficial in reducing the noise of an approaching aircraft. Thus, in this study, a direct comparison of the acoustic characteristics of high lift systems employing a circulation control wing configuration and a conventional wing flapped configuration has been made. These results indicate that acoustically, a circulation control wing high lift system could be considerably more acceptable than a wing with conventional mechanical flaps.

The NASA Lewis large wind turbine program

NASA Technical Reports Server (NTRS)

Thomas, R. L.; Baldwin, D. H.

1981-01-01

The program is directed toward development of the technology for safe, reliable, environmentally acceptable large wind turbines that have the potential to generate a significant amount of electricity at costs competitive with conventional electric generation systems. In addition, these large wind turbines must be fully compatible with electric utility operations and interface requirements. Advances are made by gaining a better understanding of the system design drivers, improvements in the analytical design tools, verification of design methods with operating field data, and the incorporation of new technology and innovative designs. An overview of the program activities is presented and includes results from the first and second generation field machines (Mod-OA, -1, and -2), the design phase of the third generation wind turbine (Mod-5) and the advanced technology projects. Also included is the status of the Department of Interior WTS-4 machine.

Technology acceptance perception for promotion of sustainable consumption.

PubMed

Biswas, Aindrila; Roy, Mousumi

2018-03-01

Economic growth in the past decades has resulted in change in consumption pattern and emergence of tech-savvy generation with unprecedented increase in the usage of social network technology. In this paper, the technology acceptance value gap adapted from the technology acceptance model has been applied as a tool supporting social network technology usage and subsequent promotion of sustainable consumption. The data generated through the use of structured questionnaires have been analyzed using structural equation modeling. The validity of the model and path estimates signifies the robustness of Technology Acceptance value gap in adjudicating the efficiency of social network technology usage in augmentation of sustainable consumption and awareness. The results indicate that subjective norm gap, ease-of-operation gap, and quality of green information gap have the most adversarial impact on social network technology usage. Eventually social networking technology usage has been identified as a significant antecedent of sustainable consumption.

Status and Analysis on Effects of Energy Efficiency Standards for Industrial Boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Liu, Meng; Ding, Qing; Zhao, Yuejin

2017-11-01

Energy conservation and environmental protection is the basic policy of China, and is an important part of ecological civilization construction. The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers.

Use and Acceptance of Mobile Technology by Hospital Nurses in Germany.

PubMed

Schmeer, Regina; Behrends, Marianne; Kupka, Thomas; Meyenburg-Altwarg, Iris; Marschollek, Michael

2016-01-01

The aim of the study was to measure and describe user behavior, information and communication technology (ICT) competence and technology acceptance of hospital nurses. 36 nurses received for six weeks a mobile phone or a tablet pc with mobile application and answered one questionnaire before and after the six weeks. The participating nurses show a high technology acceptance and private daily use of technologies. Younger participants judge their ICT competency higher than older nurses. The perceived ease of use is significantly higher in younger participants. The perceived usefulness was evaluated heterogeneously. Despite the barriers mobile technology is perceived as useful for nurses in their daily work. Factors influencing personal, institutional and device acceptance were determined in this study and can be helpful to facilitate the process of implementation of mobile technology.

Smart Home Technologies: Insights into Generation-Specific Acceptance Motives

NASA Astrophysics Data System (ADS)

Gaul, Sylvia; Ziefle, Martina

In this research we examine the generation specific acceptance motives of eHealth technologies in order to assess the likelihood of success for these new technologies. 280 participants (14 - 92 years of age) volunteered to participate in a survey, in which using motives and barriers toward smart home technologies were explored. The scenario envisaged was the use of a medical stent implemented into the body, which monitors automatically the health status and which is able to remotely communicate with the doctor. Participants were asked to evaluate the pros and cons of the usage of this technology, their acceptance motives and potential utilization barriers. In order to understand the complex nature of acceptance, personal variables (age, technical expertise, health status), individual's cognitive concepts toward ageing as well as perceived usefulness were related. Outcomes show that trust, believe in the reliability of technology, privacy and security as well as intimacy facets are essential for acceptance and should be considered in order to proactively design a successful rollout of smart home technologies.

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model

PubMed Central

Ehteshami, Asghar

2017-01-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don’t accept and don’t use it. Methods: This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. Results: The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Conclusion: Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode acceptance; because their chained relationship is clearly visible. PMID:28484289

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model.

PubMed

Ehteshami, Asghar

2017-03-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don't accept and don't use it. This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode acceptance; because their chained relationship is clearly visible.

The Human Factors and Ergonomics of P300-Based Brain-Computer Interfaces

PubMed Central

Powers, J. Clark; Bieliaieva, Kateryna; Wu, Shuohao; Nam, Chang S.

2015-01-01

Individuals with severe neuromuscular impairments face many challenges in communication and manipulation of the environment. Brain-computer interfaces (BCIs) show promise in presenting real-world applications that can provide such individuals with the means to interact with the world using only brain waves. Although there has been a growing body of research in recent years, much relates only to technology, and not to technology in use—i.e., real-world assistive technology employed by users. This review examined the literature to highlight studies that implicate the human factors and ergonomics (HFE) of P300-based BCIs. We assessed 21 studies on three topics to speak directly to improving the HFE of these systems: (1) alternative signal evocation methods within the oddball paradigm; (2) environmental interventions to improve user performance and satisfaction within the constraints of current BCI systems; and (3) measures and methods of measuring user acceptance. We found that HFE is central to the performance of P300-based BCI systems, although researchers do not often make explicit this connection. Incorporation of measures of user acceptance and rigorous usability evaluations, increased engagement of disabled users as test participants, and greater realism in testing will help progress the advancement of P300-based BCI systems in assistive applications. PMID:26266424

Technology Acceptance and Course Completion Rates in Online Education: A Non-experimental, Mixed Method Study

NASA Astrophysics Data System (ADS)

Allison, Colelia

As the need for quality online courses increase in demand, the acceptance of technology and completion rates become the focus of higher education. The purpose of this non-experimental, mixed method study was to examine the relationship between the university students' perceptions and acceptance of technology and learner completion rates with respect to the development of online courses. This study involved 61 participants from two universities regarding their perceived usefulness (PU) of technology, intent to use technology, and intent to complete a course. Two research questions were examined regarding student perceptions regarding technology employed in an online course and the relationship, if any, between technology acceptance and completion of an online university course. The technology acceptance model (TAM) was used to collect data on the usefulness of course activities and student intent to complete the course. An open-ended questionnaire was administered to collect information concerning student perceptions of course activities. Quantitative data was analyzed using SPSS and Qualtrics, which indicated there was not a significant relationship between technology acceptance and course completion (p = .154). Qualitative data were examined by pattern matching to create a concept map of the theoretical patterns between constructs. Pattern matching revealed many students favored the use of the Internet over Canvas. Furthermore, data showed students enrolled in online courses because of the flexibility and found the multimedia used in the courses as helpful in course completion. Insight was investigated to offer reasons and decisions concerning choice that were made by the students. Future recommendations are to expand mixed methods studies of technology acceptance in various disciplines to gain a better understanding of student perceptions of technology uses, intent to use, and course completion.

Examining CEGEP Students' Acceptance of Computer-Based Learning Environments: A Test of Two Models

ERIC Educational Resources Information Center

Doleck, Tenzin; Bazelais, Paul; Lemay, David John

2017-01-01

As the use of technology in education advances and broadens, empirical research around its use assumes increased importance. Yet literature investigating technology acceptance in certain populations remains scarce. We recently argued that technology acceptance investigations should also consider the modality of the antecedent belief, to…

Parental Perceptions and Recommendations of Computing Majors: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Powell, Loreen; Wimmer, Hayden

2017-01-01

Currently, there are more technology related jobs then there are graduates in supply. The need to understand user acceptance of computing degrees is the first step in increasing enrollment in computing fields. Additionally, valid measurement scales for predicting user acceptance of Information Technology degree programs are required. The majority…

Advancing environmental risk assessment for transgenic biofeedstock crops

PubMed Central

Wolt, Jeffrey D

2009-01-01

Transgenic modification of plants is a key enabling technology for developing sustainable biofeedstocks for biofuels production. Regulatory decisions and the wider acceptance and development of transgenic biofeedstock crops are considered from the context of science-based risk assessment. The risk assessment paradigm for transgenic biofeedstock crops is fundamentally no different from that of current generation transgenic crops, except that the focus of the assessment must consider the unique attributes of a given biofeedstock crop and its environmental release. For currently envisioned biofeedstock crops, particular emphasis in risk assessment will be given to characterization of altered metabolic profiles and their implications relative to non-target environmental effects and food safety; weediness and invasiveness when plants are modified for abiotic stress tolerance or are domesticated; and aggregate risk when plants are platforms for multi-product production. Robust risk assessments for transgenic biofeedstock crops are case-specific, initiated through problem formulation, and use tiered approaches for risk characterization. PMID:19883509

Environmental reservoirs and mechanisms of persistence of Vibrio cholerae

PubMed Central

Lutz, Carla; Erken, Martina; Noorian, Parisa; Sun, Shuyang; McDougald, Diane

2013-01-01

It is now well accepted that Vibrio cholerae, the causative agent of the water-borne disease cholera, is acquired from environmental sources where it persists between outbreaks of the disease. Recent advances in molecular technology have demonstrated that this bacterium can be detected in areas where it has not previously been isolated, indicating a much broader, global distribution of this bacterium outside of endemic regions. The environmental persistence of V. cholerae in the aquatic environment can be attributed to multiple intra- and interspecific strategies such as responsive gene regulation and biofilm formation on biotic and abiotic surfaces, as well as interactions with a multitude of other organisms. This review will discuss some of the mechanisms that enable the persistence of this bacterium in the environment. In particular, we will discuss how V. cholerae can survive stressors such as starvation, temperature, and salinity fluctuations as well as how the organism persists under constant predation by heterotrophic protists. PMID:24379807

Assessment of the Acceptability and Feasibility of Child Potties for Safe Child Feces Disposal in Rural Bangladesh

PubMed Central

Hussain, Faruqe; Luby, Stephen P.; Unicomb, Leanne; Leontsini, Elli; Naushin, Tania; Buckland, Audrey J.; Winch, Peter J.

2017-01-01

Abstract. Indiscriminate defecation among young children and the unsafe disposal of their feces increases fecal contamination in the household environment and the risk of diarrheal disease transmission. Improved sanitary technology for children too young to use a latrine may facilitate safe feces disposal and reduce fecal contamination in the household environment. We assessed the acceptability and feasibility of child potties in rural Bangladesh in 2010. Our team introduced child potties into 26 households for 30 days, and conducted semistructured interviews, group discussions, and observations to assess the acceptability and feasibility of their use for parents and children. Residents of this rural Bangladeshi community accepted the child potties and caregivers found them to be a feasible means of managing child feces. The color, shape, design, and size of the potty influenced its acceptability and use. These residents reported that regular use of the potty improved the household’s physical environment and caregiver and child personal hygiene. Regular potty use also reduced caregivers’ work load by making feces collection and disposal easier. Primary caregivers viewed 4–6 months as the appropriate age to initiate potty training. Sanitation interventions should integrate and emphasize potties for children’s feces management to reduce household environmental contamination. PMID:28722606

Environmental impact of biogas: A short review of current knowledge.

PubMed

Paolini, Valerio; Petracchini, Francesco; Segreto, Marco; Tomassetti, Laura; Naja, Nour; Cecinato, Angelo

2018-04-13

The social acceptance of biogas is often hampered by environmental and health concerns. In this study, the current knowledge about the impact of biogas technology is presented and discussed. The survey reports the emission rate estimates of the main greenhouse gases (GHG), namely CO 2 , CH 4 and N 2 O, according to several case studies conducted over the world. Direct emissions of gaseous pollutants are then discussed, with a focus on nitrogen oxides (NO x ); evidences of the importance of suitable biomass and digestate storages are also reported. The current knowledge on the environmental impact induced by final use of digestate is critically discussed, considering both soil fertility and nitrogen release into atmosphere and groundwater; several case studies are reported, showing the importance of NH 3 emissions with regards to secondary aerosol formation. The biogas upgrading to biomethane is also included in the study: with this regard, the methane slip in the off-gas can significantly reduce the environmental benefits.

Harz/Vesper: Acceptance Research with Logical Relations and Pragma-Dialectics

NASA Astrophysics Data System (ADS)

Harz, M.

2012-04-01

We use two different theories for our research on the acceptance of carbon capture and storage (CCS), geothermal energy and shale gas: logical relations and pragma-dialectics. With the theory of logical relations we can describe the structure of the terminus "acceptance" as a three-place or more relationship. We use the Newtonian binominal coefficients order to reflect on the complexity of the concept of acceptance. We are exploring relations between citizens, politicians, scientists, businesses and technologies. The technological-philosophical reflection on the topic "Determinants for acceptance of new technologies" concerns the issues of "Trust", "Security" as well as "Interest and Use" as the essential constituents of acceptance. Trust: Politicians, scientists and entrepreneurs need to understand themselves as advocates of acceptance. Acceptance is not automatic but requires a great effort and continuous personal commitment, as you want to secure acceptance not only for the short-term but for the long-term. The confidence curve follows a hysteresis loop as known from the magnetization of materials: It requires a significant effort. If the existing trust is lost due to erroneous communication or incorrect political action, the restoration effort is significantly greater. Citizens need to understand themselves as being asked for acceptance and as actively influencing the shapes of their life. They may not feel as victims or sufferers from technological developments but should have a realistic feeling of being able to influence - in fact - anything. "Openness creates openness." (H.-J. Bullinger) Security: The advocate promoting acceptance must take into account the security needs of the citizens with regard to the technologies which are supposed to be accepted. Even irrational fears are actual fears that can prevent acceptance. Interests and Goals of Usage: The advocate promoting acceptance must - sincerely and publicly - express his interest in the use and goals of the new technology. Politics must focus on the majority's needs. Businesses must openly commit themselves to their interest in maximizing profit by using the new technologies. Science must contribute to the effective and independent function of the technologies and claim true statements about them. Using the pragma-dialectical theory of argumentation we define "acceptance" in terms of the "acceptance of a standpoint" as an outcome of the protagonist's attempt to justify the "acceptability of a standpoint". The pragma-dialectical ideal model of critical discussion provides a number of norms for a dialectical discussion process leading to the "acceptance of a standpoint". These norms make a systematic analysis of accomplishments and flaws within a critical exchange possible. One of these norms is the sound use of argument schemes which connect a standpoint with an argument. An arguer using the argument scheme of pragmatic argumentation presents the desirable or undesirable consequences of a certain action to back up the (un)acceptability of the standpoint. Critical questions are used to reveal the (in)correct use of pragmatic argumentation. We argue that accomplishments and flaws in the pragmatic argumentation of the four parties observed are closely related to the acceptance of the technology CCS.

Does Technology Acceptance Affect E-Learning in a Non-Technology-Intensive Course?

ERIC Educational Resources Information Center

Buche, Mari W.; Davis, Larry R.; Vician, Chelley

2012-01-01

Prior research suggests that individuals' technology acceptance levels may affect their work and learning performance outcomes when activities are conducted through information technology usage. Most previous research investigating the relationship between individual attitudes towards technology and learning has been conducted in…

The socio-legal acceptance of new technologies: a close look at artificial insemination.

PubMed

Bernstein, Gaia

2002-10-01

Heated debates often surround the introduction of an important new technology into society, as exemplified by current controversies surrounding human cloning and privacy protection on the Internet. Underlying these controversies are disruptions to central socio-legal values caused by these new technologies. Whether new technologies will eventually be accepted by society is often contingent on the reaction of the legal system. This mandates the formulation of a conceptual framework for understanding and structuring the way the law should react in cases surrounding the adoption of new technologies. By using the case study of artificial insemination this Article develops the tools for structuring the legal role in the acceptance process of new technologies. The three-century controversy surrounding the innovation of artificial insemination results from the innovations' disruption of the socio-legal value of the family. Artificial Insemination--although invented in the eighteenth-century--was rarely used until the 1930s, and only legalized in the 1960s. Its application to surrogacy and its use by unmarried women extends the controversy into the twenty-first century. The case study demonstrates the nature of the relationship among the technological, social and legal acceptance processes of new technologies, and analyzes the legal acceptance debate. The conceptual framework produced is useful in understanding and structuring the legal role in current debates surrounding the introduction and acceptance of new technologies.

Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

NASA Astrophysics Data System (ADS)

Siswanto, T.; Shofiati, R.; Hartini, H.

2018-01-01

www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

Processing of nutritious, safe and acceptable foods from cells candidate crops

NASA Astrophysics Data System (ADS)

Fu, B.; Nelson, P. E.; Irvine, R.; Kanach, L. L.

A controlled ecological life-support system (CELSS) is required to sustain life for long-duration space missions. The challenge is preparing a wide variety of tasty, familiar, and nutritious foods from CELSS candidate crops under space environmental conditions. Conventional food processing technologies will have to be modified to adapt to the space environment. Extrusion is one of the processes being examined as a means of converting raw plant biomass into familiar foods. A nutrition-improved pasta has been developed using cowpea as a replacement for a portion of the durum semolina. A freeze-drying system that simulates the space conditions has also been developed. Other technologies that would fulfill the requirements of a CELSS will also be addressed.

Application of computational fluid dynamics and laminar flow technology for improved performance and sonic boom reduction

NASA Technical Reports Server (NTRS)

Bobbitt, Percy J.

1992-01-01

A discussion is given of the many factors that affect sonic booms with particular emphasis on the application and development of improved computational fluid dynamics (CFD) codes. The benefits that accrue from interference (induced) lift, distributing lift using canard configurations, the use of wings with dihedral or anhedral and hybrid laminar flow control for drag reduction are detailed. The application of the most advanced codes to a wider variety of configurations along with improved ray-tracing codes to arrive at more accurate and, hopefully, lower sonic booms is advocated. Finally, it is speculated that when all of the latest technology is applied to the design of a supersonic transport it will be found environmentally acceptable.

Processing of nutritious, safe and acceptable foods from CELSS candidate crops

NASA Technical Reports Server (NTRS)

Fu, B.; Nelson, P. E.; Irvine, R.; Kanach, L. L.; Mitchell, C. A. (Principal Investigator)

1996-01-01

A controlled ecological life-support system (CELSS) is required to sustain life for long-duration space missions. The challenge is preparing a wide variety of tasty, familiar, and nutritious foods from CELSS candidate crops under space environmental conditions. Conventional food processing technologies will have to be modified to adapt to the space environment. Extrusion is one of the processes being examined as a means of converting raw plant biomass into familiar foods. A nutrition-improved pasta has been developed using cowpea as a replacement for a portion of the durum semolina. A freeze-drying system that simulates the space conditions has also been developed. Other technologies that would fulfill the requirements of a CELSS will also be addressed.

Patients' Acceptance of Smartphone Health Technology for Chronic Disease Management: A Theoretical Model and Empirical Test.

PubMed

Dou, Kaili; Yu, Ping; Deng, Ning; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong

2017-12-06

Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients' acceptance of smartphone health technology for chronic disease management. Multiple theories and factors that may influence patients' acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients' acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients' actual use of a smartphone health app. The partial least square method was used to test the theoretical model. The model accounted for .412 of the variance in patients' intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients' smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients' intentions to use the technology. Age and gender had no significant influence on patients' acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use and actual use of smartphone health apps for chronic disease management. This study developed a theoretical model to predict patients' acceptance of smartphone health technology for chronic disease management. Although resistance to change is a significant barrier to technology acceptance, careful management of doctor-patient relationship, and raising patients' awareness of the negative effect of chronic disease can negate the effect of resistance and encourage acceptance and use of smartphone health technology to support chronic disease management for patients in the community. ©Kaili Dou, Ping Yu, Ning Deng, Fang Liu, YingPing Guan, Zhenye Li, Yumeng Ji, Ningkai Du, Xudong Lu, Huilong Duan. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 06.12.2017.

A Quantitative Examination of User Experience as an Antecedent to Student Perception in Technology Acceptance Modeling

ERIC Educational Resources Information Center

Butler, Rory

2013-01-01

Internet-enabled mobile devices have increased the accessibility of learning content for students. Given the ubiquitous nature of mobile computing technology, a thorough understanding of the acceptance factors that impact a learner's intention to use mobile technology as an augment to their studies is warranted. Student acceptance of mobile…

Teachers' Perceptions of Factors Affecting Their Adoption and Acceptance of Mobile Technology in K-12 Settings

ERIC Educational Resources Information Center

Khlaif, Zuheir

2018-01-01

Factors influencing the adoption and acceptance of tablets as a mobile technology were explored one year after their integration in middle schools in Palestine. Semi-structured interviews were conducted with 15 teachers. The participants held a variety of attitudes toward accepting mobile technologies in their instruction. The findings revealed…

Information Communication Technologies in the Classroom: Expanding TAM to Examine Instructor Acceptance and Use

ERIC Educational Resources Information Center

Huntington, Heidi; Worrell, Tracy

2013-01-01

Studies show that use of computer-based information communication technologies (ICTs) can have positive impacts on student motivation and learning. The present study examines the issue of ICT adoption in the classroom by expanding the Technology Acceptance Model to identify factors that contribute to teacher acceptance and use of these…

Adding Innovation Diffusion Theory to the Technology Acceptance Model: Supporting Employees' Intentions to Use E-Learning Systems

ERIC Educational Resources Information Center

Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Hsu, Chia-Ning

2011-01-01

This study intends to investigate factors affecting business employees' behavioral intentions to use the e-learning system. Combining the innovation diffusion theory (IDT) with the technology acceptance model (TAM), the present study proposes an extended technology acceptance model. The proposed model was tested with data collected from 552…

Framing Innovation: Does an Instructional Vision Help Superintendents Gain Acceptance for a Large-Scale Technology Initiative?

ERIC Educational Resources Information Center

Flanagan, Gina E.

2014-01-01

There is limited research that outlines how a superintendent's instructional vision can help to gain acceptance of a large-scale technology initiative. This study explored how superintendents gain acceptance for a large-scale technology initiative (specifically a 1:1 device program) through various leadership actions. The role of the instructional…

Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

ERIC Educational Resources Information Center

Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

2013-01-01

The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

Exploring Relationships between Personal Innovativeness and Acceptance of Technology of School Administrators

ERIC Educational Resources Information Center

Moore, Pamela Richardson

2012-01-01

An understanding of school administrators' personal innovativeness relative to technology acceptance is essential to the implementation of technology programs. School administrators serve as visionary instructional leaders whose beliefs about technology impact technology integration at their schools. The purpose of the "ex post…

An Empirical Investigation of Student Acceptance of Synchronous E-Learning in an Online University

ERIC Educational Resources Information Center

Kang, Minseok; Shin, Won sug

2015-01-01

This study proposes an extended technology acceptance model to predict acceptance of synchronous e-learning by examining relationships among variables associated with factors influencing the technology acceptance of synchronous e-learning. Learners at an online university participated through an online survey; there were 251 respondents in all.…

Acceptance of genetically modified foods: the relation between technology and evaluation.

PubMed

Tenbült, Petra; De Vries, Nanne K; van Breukelen, Gerard; Dreezens, Ellen; Martijn, Carolien

2008-07-01

This study investigates why consumers accept different genetically modified food products to different extents. The study shows that whether food products are genetically modified or not and whether they are processed or not are the two important features that affect the acceptance of food products and their evaluation (in terms of perceived healthiness, naturalness, necessity and tastiness). The extent to which these evaluation attributes and acceptance of a product are affected by genetic modification or processing depends on whether the product is negatively affected by the other technology: Any technological change to a 'natural' product (when nonprocessed products are genetically modified or when non-genetically modified products are processed) affect evaluation and acceptance stronger than a change to an technologically adapted product (when processed products are also genetically modified or vice versa). Furthermore, evaluation attributes appear to mediate the effects of genetic modification and processing on acceptance.

Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

PubMed

Chen, Ke; Chan, Alan Hoi Shou

2014-01-01

The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

Some factors influencing the nonexpert's perception and evaluation of environmental risks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, E.

Policy makers and decision analysts have been limited somewhat in their ability to predict public reactions to regulatory decisions about hazardous substances or technologies. Most studies of the nonexpert's evaluation of environmental risks have relied on survey data and correlational analyses which preclude the determination of interactive effects, effects that could explain apparent inconsistencies. Three experimental studies were designed to test empirically the effect of six dimensions of environmental risk on judgments of (1) perceived risk, (2) acceptability of risk, (3) subjective probability of negative outcomes due to exposure, and (4) perceived severity of consequences. Factors examined included: (a) familiaritymore » with the terms used to describe a hazard, (b) environmental persistence of a chemical, (c) personal relevance of data used to evaluate cancer-causing potential, (d) personal relevance of possible adverse consequences, (e) perceived control over exposure, and (f) vividness of the exposure pathway. The findings were discussed in terms of their implications for the nonexpert's formulation of risk perceptions, and public policy in the domain of environmental risks.« less

The status of the federal magnetic fusion program, or fusion in transition: from science to technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kane, J.S.

1983-06-01

The current status of magnetic fusion is summarized. The science is in place; the application must be made. Government will have to underwrite the risk of the program, but the private sector must manage it. Government officials must be convinced fusion is in the interest of the taxpayer, private sector decision makers that it is commercial. Questions concerning reliability, availability, first cost, safety, environment, and sociology must be asked. Fusion energy is essentially inexhaustible, appears environmentally acceptable, and is one of a very short list of alternatives.

Exploring Students' Technology Acceptance in College Developmental Mathematics

ERIC Educational Resources Information Center

Williams, Handan

2012-01-01

Technology has become a large component of teaching and learning in mathematics education. Gaining insight into students' technology acceptance factors is a crucial step in understanding instructional design and implementation of technology-based learning programs. Despite the widespread use of technology in education, few research efforts…

Influencing Technology Education Teachers to Accept Teaching Positions

ERIC Educational Resources Information Center

Steinke, Luke Joseph; Putnam, Alvin Robert

2008-01-01

Technology education is facing a significant teacher shortage. The purpose of this study was to address the technology education teacher shortage by examining the factors that influence technology education teachers to accept teaching positions. The population for the study consisted of technology education teachers and administrators. A survey…

ICT and OTs: a model of information and communication technology acceptance and utilisation by occupational therapists.

PubMed

Schaper, Louise K; Pervan, Graham P

2007-06-01

There is evidence to suggest that health professionals are reluctant to accept and utilise information and communication technologies (ICT) and concern is growing within health informatics research that this is contributing to the lag in adoption and utilisation of ICT across the health sector. Technology acceptance research within the field of information systems has been limited in its application to health and there is a concurrent need to develop and gain empirical support for models of technology acceptance within health and to examine acceptance and utilisation issues amongst health professionals to improve the success of information system implementation in this arena. This paper outlines a project that examines ICT acceptance and utilisation by Australian occupational therapists. It describes the theoretical basis behind the development of a research model and the methodology being employed to empirically validate the model using substantial quantitative, qualitative and longitudinal data. Preliminary results from Phase II of the study are presented. The theoretical significance of this work is that it uses a thoroughly constructed research model, with potentially the largest sample size ever tested, to extend technology acceptance research into the health sector.

Passenger comfort technology for system decision making

NASA Technical Reports Server (NTRS)

Conner, D. W.

1980-01-01

Decisions requiring passenger comfort technology were shown to depend on: the relationship between comfort and other factors (e.g., cost, urgency, alternate modes) in traveler acceptance of the systems, serving a selected market require technology to quantify effects of comfort versus offsetting factors in system acceptance. Public predict the maximum percentage of travelers who willingly accept the overall comfort of any trip ride. One or the other of these technology requirements apply to decisions on system design, operation and maintenance.

The Technology Acceptance Model for Resource-Limited Settings (TAM-RLS): A Novel Framework for Mobile Health Interventions Targeted to Low-Literacy End-Users in Resource-Limited Settings.

PubMed

Campbell, Jeffrey I; Aturinda, Isaac; Mwesigwa, Evans; Burns, Bridget; Santorino, Data; Haberer, Jessica E; Bangsberg, David R; Holden, Richard J; Ware, Norma C; Siedner, Mark J

2017-11-01

Although mobile health (mHealth) technologies have shown promise in improving clinical care in resource-limited settings (RLS), they are infrequently brought to scale. One limitation to the success of many mHealth interventions is inattention to end-user acceptability, which is an important predictor of technology adoption. We conducted in-depth interviews with 43 people living with HIV in rural Uganda who had participated in a clinical trial of a short messaging system (SMS)-based intervention designed to prompt return to clinic after an abnormal laboratory test. Interviews focused on established features of technology acceptance models, including perceived ease of use and perceived usefulness, and included open-ended questions to gain insight into unexplored issues related to the intervention's acceptability. We used conventional (inductive) and direct content analysis to derive categories describing use behaviors and acceptability. Interviews guided development of a proposed conceptual framework, the technology acceptance model for resource-limited settings (TAM-RLS). This framework incorporates both classic technology acceptance model categories as well as novel factors affecting use in this setting. Participants described how SMS message language, phone characteristics, and experience with similar technologies contributed to the system's ease of use. Perceived usefulness was shaped by the perception that the system led to augmented HIV care services and improved access to social support from family and colleagues. Emergent themes specifically related to mHealth acceptance among PLWH in Uganda included (1) the importance of confidentiality, disclosure, and stigma, and (2) the barriers and facilitators downstream from the intervention that impacted achievement of the system's target outcome. The TAM-RLS is a proposed model of mHealth technology acceptance based upon end-user experiences in rural Uganda. Although the proposed model requires validation, the TAM-RLS may serve as a useful tool to guide design and implementation of mHealth interventions.

Determinants of Intention to Use eLearning Based on the Technology Acceptance Model

ERIC Educational Resources Information Center

Punnoose, Alfie Chacko

2012-01-01

The purpose of this study was to find some of the predominant factors that determine the intention of students to use eLearning in the future. Since eLearning is not just a technology acceptance decision but also involves cognition, this study extended its search beyond the normal technology acceptance variables into variables that could affect…

An Exploration of Student Internet Use in India: The Technology Acceptance Model and the Theory of Planned Behaviour

ERIC Educational Resources Information Center

Fusilier, Marcelline; Durlabhji, Subhash

2005-01-01

Purpose: The purpose of this paper is to explore behavioral processes involved in internet technology acceptance and use with a sample in India, a developing country that can potentially benefit from greater participation in the web economy. Design/methodology/approach - User experience was incorporated into the technology acceptance model (TAM)…

Wake Vortex Wingtip-Turbine Powered Circulation Control High-Lift System

NASA Technical Reports Server (NTRS)

Moore, Mark D.

2005-01-01

NASA s Vehicle Systems Program is investing in aeronautics technology development across six vehicle sectors, in order to improve future air travel. These vehicle sectors include subsonic commercial transports, supersonic vehicles, Uninhabited Aerial Vehicles (UAVs), Extreme Short Takeoff and Landing (ESTOL) vehicles, Rotorcraft, and Personal Air Vehicles (PAVs). While the subsonic transport is firmly established in U.S. markets, the other vehicle sectors have not developed a sufficient technology or regulatory state to permit widespread, practical use. The PAV sector has legacy products in the General Aviation (GA) market, but currently only accounts for negligible revenue miles, sales, or market share of personal travel. In order for PAV s to ever capture a significant market, these small aircraft require technologies that permit them to be less costly, environmentally acceptable, safer, easier to operate, more efficient, and less dependent on large support infrastructures.

US general aviation: The ingredients for a renaissance. A vision and technology strategy for US industry, NASA, FAA, universities

NASA Technical Reports Server (NTRS)

Holmes, Bruce

1993-01-01

General aviation today is a vital component in the nation's air transportation system. It is threatened for survival but has enormous potential for expansion in utility and use. This potential for expansion is fueled by new satellite navigation and communication systems, small computers, flat panel displays, and advanced aerodynamics, materials and manufacturing methods, and propulsion technologies which create opportunities for new levels of environmental and economic acceptability. Expanded general aviation utility and use could have a large impact on the nation's jobs, commerce, industry, airspace capacity, trade balance, and quality of life. This paper presents, in viewgraph form, a general overview of U.S. general aviation. Topics covered include general aviation shipment and billings; airport and general aviation infrastructure; cockpit, airplane, and airspace technologies; market demand; air traffic operations and aviation accidents; fuel efficiency comparisons; and general aviation goals and strategy.

Impact of Risk-Benefit Perception and Trust on Medical Technology Acceptance in Relation to Drug and Device Lag: A Tripartite Cross-Sectional Survey.

PubMed

Todaka, Koji; Kishimoto, Junji; Ikeda, Masayuki; Ikeda, Koji; Yamamoto, Haruko

2017-01-01

New drug and medical device introduction in Japan usually lags behind that in the West. Many reports indicate that in Japan, the associated risks are considered greater than the benefits recognized in other countries. This study aimed to compare the relationship between risk-benefit perception and acceptance of medical technologies in 3 leading markets. A tripartite cross-sectional survey of the general public was used. In total, 3345 adults in the United Kingdom, the United States, and Japan participated, and sexes and age groups were equally represented. Questions about the perception of risk, benefit, and acceptance of medical and other scientific technologies, and trust of medical product providers or regulatory authorities were included. Five-step Likert coding for risk/benefit/acceptance of 4 medical items (x-rays, antibiotics, vaccines, and cardiac pacemakers) and 6 general items (such as automobiles and airplanes) were collected. Relationships between benefit perception and acceptance were linear for 4 medical technologies. The relationship had a similar slope but was shifted downward in Japan compared with the UK and US ( P < .01), suggesting a lower acceptance in Japan for all benefit perceptions. The trend was the same between risk perception and acceptance, except for slopes that were negative. Correspondence analysis showed a strong correlation among acceptance of medical technologies, benefits of medical technologies, trust in doctors, and trust in the Department of Health. The UK and US attributes were clustered with positive responses such as "useful," "acceptable," and "trustworthy," whereas Japan was clustered with intermediate to negative responses such as "neither" and "untrustworthy." Acceptance of medical technologies was low in Japan because of significant differences in trust for doctors and authorities compared with that in the UK and US. This is a possible basis for delays of 24 to 60 months for medical product approval in Japan.

The Potential Role of Virtual Reality in Environmental Education.

ERIC Educational Resources Information Center

Taylor, Gregory L.; Disinger, John F.

1997-01-01

Investigates the acceptability and possible role of virtual reality (VR) in environmental education. Among the principal findings were that the sample population of environmental educators indicated an acceptance of VR as a teaching tool. VR applications that allow students to have an experience not available in the physical world were perceived…

Aircraft Maintenance Engineering: Factors Impacting Airlines E-Maintenance Technologies, Authoring and Illustrations

NASA Astrophysics Data System (ADS)

Karayianes, Frank

The purpose of this research was to evaluate factors influencing acceptance and use of technologies in the field of aircraft maintenance authoring, graphics, and documentation. Maintenance engineering authors convert complex engineering used in aircraft production and transform that data using technology (tools) into usable technical publications data. While the current literature includes a large volume of research in technology acceptance in various domains of industry and business, the problem is that no such studies exist with respect to the aircraft maintenance engineering authoring, allowing any number of tools to be used and acceptance to be unsure. The study was based on theoretical approaches of the Technology Acceptance Model and the associated hypothesis related to eight research questions. A survey questionnaire was developed for data collection from a selected population of aircraft maintenance engineering authors. Data collected from 148 responses were exposed to a range of statistical methods and analyses. Analysis of data were performed within the structural equation model using exploratory factor analysis, confirmatory factor analysis, and a range of regression methods. The analyses generally provided results consistent with prior literature. Two survey questions yielded unexpected results contrary to similar studies. The relationship between prior experience and job level did not show a significant relationship with perceived usefulness or perceived ease of use. Other results included the significant relationship between Perceived Usefulness and Perceived Ease of Use with Technology acceptance. Recommendations include understanding how Technology Acceptance can be improved for the industry and the need for further research not covered to refine recommendations for technology acceptance related to the aviation industry.

Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

ERIC Educational Resources Information Center

Song, Yanjie; Kong, Siu-Cheung

2017-01-01

The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

The acceptance of green technology: A case study in Sabah Development Corridor

NASA Astrophysics Data System (ADS)

Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

2017-08-01

Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

Environmental, technical and technological aspects of hazardous waste management in Poland

NASA Astrophysics Data System (ADS)

Pyssa, Justyna

2017-10-01

The issue of recovery and disposal of hazardous waste is not a new concern. The waste comes from various processes and technologies and therefore the bigger emphasis should be placed on reducing quantities of generated hazardous waste (which is often connected with changes in the technology of manufacturing a given product) and limitation of their negative influence on natural environment. Plants specializing in waste processing processes should meet the so-called cardinal triad of conditions deciding on the full success of investment, and namely: economic effectiveness, ecological efficiency and social acceptance. The structure of generation of hazardous waste in EU-28 has been presented in the paper. Methods of hazardous waste disposal in Poland have been discussed. Economic and ecological criteria for the selection of technology of hazardous waste disposal have been analyzed. The influence of the hazardous waste on the environment is also presented. For four groups of waste, which are currently stored, alternative methods of disposal have been proposed.

Experience with The Use of Warm Mix Asphalt Additives in Bitumen Binders

NASA Astrophysics Data System (ADS)

Cápayová, Silvia; Unčík, Stanislav; Cihlářová, Denisa

2018-03-01

In most European countries, Hot Mix Asphalt (HMA) technology is still being used as the standard for the production and processing of bituminous mixtures. However, from the perspective of environmental acceptability, global warming and greenhouse gas production, Slovakia is making an effort to put into practice modern technology, which is characterized by lower energy consumption and reducing negative impacts on the environment. Warm mix asphalt technologies (WMA), which have been verified at the Department of Transportation Engineering laboratory, Faculty of Civil Engineering, Slovak University of Technology (FCE, SUT) can provide the required mixture properties and can be used not only for the construction of new roads, but also for their renovation and reconstruction. The paper was created in cooperation with the Technical University of Ostrava, Czech Republic, which also deals with the addition of additives to asphalt mixtures and binders. It describes a comparison of the impact of some organic and chemical additives on the properties of commonly used bitumen binders in accordance with valid standards and technical regulations.

Meeting the "Digital Natives": Understanding the Acceptance of Technology in Classrooms

ERIC Educational Resources Information Center

Gu, Xiaoqing; Zhu, Yuankun; Guo, Xiaofeng

2013-01-01

The past few decades have witnessed the rapid development of information and communication technology around the world, as well as continuing efforts to introduce technology into K12 schools. To gauge the success of integrating technology into classrooms, how end users, including teachers and students, accept and use technology while overcoming a…

Renewable power needs smart storage solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madison, Alison L.

2010-10-24

Ancient Greek philosopher Heraclitus claimed that the only thing constant in life is change, a truth we must accept and even celebrate. Another truth we face today is a growing demand for more energy to help us power the kind and pace of change we’ve become accustomed to, while minimizing environmental consequences. Renewable energy--two words that often find themselves woven into environmentally conscious dialogue. And according to Dave Lucero, director of alternative energy storage at EaglePicher Technologies LLC, the Tri-Cities should be thinking about two more: energy storage. Lucero recently addressed the Tri-Cities Research District about tackling the persistent challengemore » of maximizing renewable energy, which is inherently variable due to changing weather patterns. Capturing that energy and making it available for later use is vital.« less

Speciation of metal(loid)s in environmental samples by X-ray absorption spectroscopy: a critical review.

PubMed

Gräfe, Markus; Donner, Erica; Collins, Richard N; Lombi, Enzo

2014-04-25

Element specificity is one of the key factors underlying the widespread use and acceptance of X-ray absorption spectroscopy (XAS) as a research tool in the environmental and geo-sciences. Independent of physical state (solid, liquid, gas), XAS analyses of metal(loid)s in complex environmental matrices over the past two decades have provided important information about speciation at environmentally relevant interfaces (e.g. solid-liquid) as well as in different media: plant tissues, rhizosphere, soils, sediments, ores, mineral process tailings, etc. Limited sample preparation requirements, the concomitant ability to preserve original physical and chemical states, and independence from crystallinity add to the advantages of using XAS in environmental investigations. Interpretations of XAS data are founded on sound physical and statistical models that can be applied to spectra of reference materials and mixed phases, respectively. For spectra collected directly from environmental matrices, abstract factor analysis and linear combination fitting provide the means to ascertain chemical, bonding, and crystalline states, and to extract quantitative information about their distribution within the data set. Through advances in optics, detectors, and data processing, X-ray fluorescence microprobes capable of focusing X-rays to micro- and nano-meter size have become competitive research venues for resolving the complexity of environmental samples at their inherent scale. The application of μ-XANES imaging, a new combinatorial approach of X-ray fluorescence spectrometry and XANES spectroscopy at the micron scale, is one of the latest technological advances allowing for lateral resolution of chemical states over wide areas due to vastly improved data processing and detector technology. Copyright © 2014. Published by Elsevier B.V.

Minimal support technology and in situ resource utilization for risk management of planetary spaceflight missions

NASA Astrophysics Data System (ADS)

Murphy, K. L.; Rygalov, V. Ye.; Johnson, S. B.

2009-04-01

All artificial systems and components in space degrade at higher rates than on Earth, depending in part on environmental conditions, design approach, assembly technologies, and the materials used. This degradation involves not only the hardware and software systems but the humans that interact with those systems. All technological functions and systems can be expressed through functional dependence: [Function]˜[ERU]∗[RUIS]∗[ISR]/[DR];where [ERU]efficiency (rate) of environmental resource utilization[RUIS]resource utilization infrastructure[ISR]in situ resources[DR]degradation rateThe limited resources of spaceflight and open space for autonomous missions require a high reliability (maximum possible, approaching 100%) for system functioning and operation, and must minimize the rate of any system degradation. To date, only a continuous human presence with a system in the spaceflight environment can absolutely mitigate those degradations. This mitigation is based on environmental amelioration for both the technology systems, as repair of data and spare parts, and the humans, as exercise and psychological support. Such maintenance now requires huge infrastructures, including research and development complexes and management agencies, which currently cannot move beyond the Earth. When considering what is required to move manned spaceflight from near Earth stations to remote locations such as Mars, what are the minimal technologies and infrastructures necessary for autonomous restoration of a degrading system in space? In all of the known system factors of a mission to Mars that reduce the mass load, increase the reliability, and reduce the mission’s overall risk, the current common denominator is the use of undeveloped or untested technologies. None of the technologies required to significantly reduce the risk for critical systems are currently available at acceptable readiness levels. Long term interplanetary missions require that space programs produce a craft with all systems integrated so that they are of the highest reliability. Right now, with current technologies, we cannot guarantee this reliability for a crew of six for 1000 days to Mars and back. Investigation of the technologies to answer this need and a focus of resources and research on their advancement would significantly improve chances for a safe and successful mission.

Evaluating oversight systems for emerging technologies: a case study of genetically engineered organisms.

PubMed

Kuzma, Jennifer; Najmaie, Pouya; Larson, Joel

2009-01-01

The U.S. oversight system for genetically engineered organisms (GEOs) was evaluated to develop hypotheses and derive lessons for oversight of other emerging technologies, such as nanotechnology. Evaluation was based upon quantitative expert elicitation, semi-standardized interviews, and historical literature analysis. Through an interdisciplinary policy analysis approach, blending legal, ethical, risk analysis, and policy sciences viewpoints, criteria were used to identify strengths and weaknesses of GEOs oversight and explore correlations among its attributes and outcomes. From the three sources of data, hypotheses and broader conclusions for oversight were developed. Our analysis suggests several lessons for oversight of emerging technologies: the importance of reducing complexity and uncertainty in oversight for minimizing financial burdens on small product developers; consolidating multi-agency jurisdictions to avoid gaps and redundancies in safety reviews; consumer benefits for advancing acceptance of GEO products; rigorous and independent pre- and post-market assessment for environmental safety; early public input and transparency for ensuring public confidence; and the positive role of public input in system development, informed consent, capacity, compliance, incentives, and data requirements and stringency in promoting health and environmental safety outcomes, as well as the equitable distribution of health impacts. Our integrated approach is instructive for more comprehensive analyses of oversight systems, developing hypotheses for how features of oversight systems affect outcomes, and formulating policy options for oversight of future technological products, especially nanotechnology products.

Driver acceptance of collision warning applications based on heavy-truck V2V technology

DOT National Transportation Integrated Search

2016-10-01

Battelle conducted a series of driver acceptance clinics (DACs) with heavy-truck drivers to gauge their acceptance of collision-warning applications using vehicle-to-vehicle (V2V) communication technology. This report describes the results from Volpe...

User Acceptance of Social Learning Systems in Higher Education: An Application of the Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Akman, Ibrahim; Turhan, Cigdem

2017-01-01

This study aims to explore the users' behaviour and acceptance of social media for learning in higher educational institutions with the help of the extended Technology Acceptance Model (TAM). TAM has been extended to investigate how ethical and security awareness of users affect the actual usage of social learning applications. For this purpose, a…

Understanding and enhancing user acceptance of computer technology

NASA Technical Reports Server (NTRS)

Rouse, William B.; Morris, Nancy M.

1986-01-01

Technology-driven efforts to implement computer technology often encounter problems due to lack of acceptance or begrudging acceptance of the personnel involved. It is argued that individuals' acceptance of automation, in terms of either computerization or computer aiding, is heavily influenced by their perceptions of the impact of the automation on their discretion in performing their jobs. It is suggested that desired levels of discretion reflect needs to feel in control and achieve self-satisfaction in task performance, as well as perceptions of inadequacies of computer technology. Discussion of these factors leads to a structured set of considerations for performing front-end analysis, deciding what to automate, and implementing the resulting changes.

Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

PubMed

Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

2016-01-01

This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

Approaches for Sustainable Mitigation of Arsenic Calamity in Bangladesh: Search for Safe Drinking Water

NASA Astrophysics Data System (ADS)

Alauddin, M.; Bhattacharjee, M.; Zakaria, A. B.; Rahman, M. M.; Seraji, M. S.

2008-05-01

Arsenic contamination of groundwater in Gangetic plain of Bihar, West Bengal in India and Bengal delta plain Bangladesh is shaping up as the greatest environmental health disaster in the current century. About 450 million combined population in these regions are at risk of developing adverse health effects due to arsenic contamination in groundwater. For an effective and sustainable mitigation, it is essential that we improve our understanding of fundamental processes of arsenic mobilization in sediments, biogeochemistry of arsenic in aquifer sediments and weigh a wide range of options for arsenic safe water for the vast population. In this paper, aspects of arsenic removal technology from groundwater in affected areas, sustainable development of household water filtration systems, deep aquifer water as potential arsenic safe water will be presented. In addition, sustainable development of water purification systems such as pond sand filtration (PSF), river sand filtration (RSF), rain water harvesting (RWH), dug well and their acceptability by the community will be discussed. A recent development of indigenous technology by local masons involves searching safe water through bore hole sediment color. The viability of this option in certain areas of Bangladesh will be discussed. Also, one of the household filtration systems approved by the government and locally known as SONO filter was recognized recently by the National Academy of Engineering -Grainger Challenge Prize for sustainability. Over 30, 000 of this unit were deployed in arsenic affected areas of Bangladesh. The affordability, ease of maintenance, social acceptability and environmental friendliness of all options will be addressed in the presentation.

Explicating the Influences That Explain Intention to Use Technology among English Teachers in China

ERIC Educational Resources Information Center

Teo, Timothy; Huang, Fang; Hoi, Cathy Ka Weng

2018-01-01

Given the paradox between pervasive promotion of technology use in English teaching and lack of studies about teachers' technology acceptance in China, this study aims to examine intentions of English teachers in China to use technology in their classroom teaching. Based on the technology acceptance model, eight variables including perceived…

European consumer response to packaging technologies for improved beef safety.

PubMed

Van Wezemael, Lynn; Ueland, Øydis; Verbeke, Wim

2011-09-01

Beef packaging can influence consumer perceptions of beef. Although consumer perceptions and acceptance are considered to be among the most limiting factors in the application of new technologies, there is a lack of knowledge about the acceptability to consumers of beef packaging systems aimed at improved safety. This paper explores European consumers' acceptance levels of different beef packaging technologies. An online consumer survey was conducted in five European countries (n=2520). Acceptance levels among the sample ranged between 23% for packaging releasing preservative additives up to 73% for vacuum packaging. Factor analysis revealed that familiar packaging technologies were clearly preferred over non-familiar technologies. Four consumer segments were identified: the negative (31% of the sample), cautious (30%), conservative (17%) and enthusiast (22%) consumers, which were profiled based on their attitudes and beef consumption behaviour. Differences between consumer acceptance levels should be taken into account while optimising beef packaging and communicating its benefits. Copyright © 2011 Elsevier Ltd. All rights reserved.

ICT & OTs: a model of information and communications technology acceptance and utilisation by occupational therapists (part 2).

PubMed

Schaper, Louise; Pervan, Graham

2007-01-01

The research reported in this paper describes the development, empirical validation and analysis of a model of technology acceptance by Australian occupational therapists. The study described involved the collection of quantitative data through a national survey. The theoretical significance of this work is that it uses a thoroughly constructed research model, with one of the largest sample sizes ever tested (n=1605), to extend technology acceptance research into the health sector. Results provide strong support for the model. This work reveals the complexity of the constructs and relationships that influence technology acceptance and highlights the need to include sociotechnical and system issues in studies of technology acceptance in healthcare to improve information system implementation success in this arena. The results of this study have practical and theoretical implications for health informaticians and researchers in the field of health informatics and information systems, tertiary educators, Commonwealth and State Governments and the allied health professions.

Factors Impacting Teachers' Adoption of Mobile Learning

ERIC Educational Resources Information Center

Mac Callum, Kathryn; Jeffrey, Lynn; Kinshuk

2014-01-01

As mobile technology has advanced, awareness is growing that these technologies may benefit teaching and learning. However, despite this interest, the factors that will determine the acceptance of mobile technology by lecturers have been limited. This study proposed and tested a new model that extends the technology acceptance model (TAM) with…

The Process of Accepting Technology Innovation for Rural Teachers

ERIC Educational Resources Information Center

Cerovski, Jeremy

2016-01-01

In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

Assessing user acceptance towards automated and conventional sink use for hand decontamination using the technology acceptance model.

PubMed

Dawson, Carolyn H; Mackrill, Jamie B; Cain, Rebecca

2017-12-01

Hand hygiene (HH) prevents harmful contaminants spreading in settings including domestic, health care and food handling. Strategies to improve HH range from behavioural techniques through to automated sinks that ensure hand surface cleaning. This study aimed to assess user experience and acceptance towards a new automated sink, compared to a normal sink. An adapted version of the technology acceptance model (TAM) assessed each mode of handwashing. A within-subjects design enabled N = 46 participants to evaluate both sinks. Perceived Ease of Use and Satisfaction of Use were significantly lower for the automated sink, compared to the conventional sink (p < 0.005). Across the remaining TAM factors, there was no significant difference. Participants suggested design features including jet strength, water temperature and device affordance may improve HH technology. We provide recommendations for future HH technology development to contribute a positive user experience, relevant to technology developers, ergonomists and those involved in HH across all sectors. Practitioner Summary: The need to facilitate timely, effective hand hygiene to prevent illness has led to a rise in automated handwashing systems across different contexts. User acceptance is a key factor in system uptake. This paper applies the technology acceptance model as a means to explore and optimise the design of such systems.

Attitudinal and Intentional Acceptance of Domestic Robots by Younger and Older Adults

PubMed Central

Ezer, Neta; Fisk, Arthur D.; Rogers, Wendy A.

2014-01-01

A study was conducted to examine the expectations that younger and older individuals have about domestic robots and how these expectations relate to robot acceptance. In a questionnaire participants were asked to imagine a robot in their home and to indicate how much items representing technology, social partner, and teammate acceptance matched their robot. There were additional questions about how useful and easy to use they thought their robot would be. The dependent variables were attitudinal and intentional acceptance. The analysis of the responses of 117 older adults (aged 65–86) and 60 younger adults (aged 18–25) indicated that individuals thought of robots foremost as performance-directed machines, less so as social devices, and least as unproductive entities. The robustness of the Technology Acceptance Model to robot acceptance was supported. Technology experience accounted for the variance in robot acceptance due to age. PMID:25584365

Development of a tripolar model of technology acceptance: Hospital-based physicians' perspective on EHR.

PubMed

Beglaryan, Mher; Petrosyan, Varduhi; Bunker, Edward

2017-06-01

In health care, information technologies (IT) hold a promise to harness an ever-increasing flow of health related information and bring significant benefits including improved quality of care, efficiency, and cost containment. One of the main tools for collecting and utilizing health data is the Electronic Health Record (EHR). EHRs implementation can face numerous barriers to acceptance including attitudes and perceptions of potential users, required effort attributed to their implementation and usage, and resistance to change. Various theories explicate different aspects of technology deployment, implementation, and acceptance. One of the common theories is the Technology Acceptance Model (TAM), which helps to study the implementation of different healthcare IT applications. The objectives of this study are: to understand the barriers of EHR implementation from the perspective of physicians; to identify major determinants of physicians' acceptance of technology; and develop a model that explains better how EHRs (and technologies in general) are accepted by physicians. The proposed model derives from a cross-sectional survey of physicians selected through multi-stage cluster sampling from the hospitals of Yerevan, Armenia. The study team designed the survey instrument based on a literature review on barriers of EHR implementation. The analysis employed exploratory structural equation modeling (ESEM) with a robust weighted least squares (WLSMV) estimator for categorical indicators. The analysis progressed in two steps: appraisal of the measurement model and testing of the structural model. The derived model identifies the following factors as direct determinants of behavioral intention to use a novel technology: projected collective usefulness; personal innovativeness; patient influence; and resistance to change. Other factors (e.g., organizational change, professional relationships, administrative monitoring, organizational support and computer anxiety) exert their effects through projected collective usefulness, perceived usefulness, and perceived ease of use. The model reconciles individual-oriented and environment-oriented theoretical approaches and proposes a Tripolar Model of Technology Acceptance (TMTA), bringing together three key pillars of the healthcare: patients, practitioners, and provider organizations. The proposed TMTA explains 85% of variance of behavioral intention to use technology. The current study draws from the barriers of EHR implementation and identifies major determinants of technology acceptance among physicians. The study proposes TMTA as affording stronger explanative and predictive abilities for the health care system. TMTA paves a long overlooked gap in TAM and its descendants, which, in organizational settings, might distort construal of technology acceptance. It also explicates with greater depth the interdependence of different participants of the healthcare and complex interactions between healthcare and technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

Prospects for the use of plant cell cultures in food biotechnology.

PubMed

Davies, Kevin M; Deroles, Simon C

2014-04-01

Plant cell cultures can offer continuous production systems for high-value food and health ingredients, independent of geographical or environmental variations and constraints. Yet despite many improvements in culture technologies, cell line selection, and bioreactor design, there are few commercial successes. This is principally due to the culture yield and market price of food products not being sufficient to cover the plant cell culture production costs. A better understanding of the underpinning biological mechanisms that control the target metabolite biosynthetic pathways may allow the metabolic engineering of cell lines to provide for economically competitive product yields. However, uncertainty around the regulatory and public acceptance of products derived from engineered cell cultures presents a barrier to the uptake of the technology by food product companies. Copyright © 2014 Elsevier Ltd. All rights reserved.

A modular approach for automated sample preparation and chemical analysis

NASA Technical Reports Server (NTRS)

Clark, Michael L.; Turner, Terry D.; Klingler, Kerry M.; Pacetti, Randolph

1994-01-01

Changes in international relations, especially within the past several years, have dramatically affected the programmatic thrusts of the U.S. Department of Energy (DOE). The DOE now is addressing the environmental cleanup required as a result of 50 years of nuclear arms research and production. One major obstacle in the remediation of these areas is the chemical determination of potentially contaminated material using currently acceptable practices. Process bottlenecks and exposure to hazardous conditions pose problems for the DOE. One proposed solution is the application of modular automated chemistry using Standard Laboratory Modules (SLM) to perform Standard Analysis Methods (SAM). The Contaminant Analysis Automation (CAA) Program has developed standards and prototype equipment that will accelerate the development of modular chemistry technology and is transferring this technology to private industry.

Biomedical data integration - capturing similarities while preserving disparities.

PubMed

Bianchi, Stefano; Burla, Anna; Conti, Costanza; Farkash, Ariel; Kent, Carmel; Maman, Yonatan; Shabo, Amnon

2009-01-01

One of the challenges of healthcare data processing, analysis and warehousing is the integration of data gathered from disparate and diverse data sources. Promoting the adoption of worldwide accepted information standards along with common terminologies and the use of technologies derived from semantic web representation, is a suitable path to achieve that. To that end, the HL7 V3 Reference Information Model (RIM) [1] has been used as the underlying information model coupled with the Web Ontology Language (OWL) [2] as the semantic data integration technology. In this paper we depict a biomedical data integration process and demonstrate how it was used for integrating various data sources, containing clinical, environmental and genomic data, within Hypergenes, a European Commission funded project exploring the Essential Hypertension [3] disease model.

Harnessing our very life.

PubMed

Wills, Peter R; Williams, David L F; Trussell, Denys; Mann, L R B

2013-01-01

The Aristotelian ideas of nature (physis) and technology (techné) are taken as a starting point for understanding what it would mean for technology to be truly living. Heidegger's critique of the conflation of scientific and technological thinking in the current era is accepted as demonstrating that humanity does not have a deep enough appreciation of the nature of life to harness its essence safely. Could the vision of harnessing life be realized, which we strongly doubt, living technology would give selected humans transforming powers that could be expected to exacerbate, rather than solve, current global problems. The source of human purposefulness, and hence of both technology and ethics, is identified in nature's emergent capability to instantiate informational representations in material forms. Ethics that are properly grounded in an appreciation of intrinsic value, especially that of life, demand that proposals to give humanity the capabilities of living technology address the social, political, economic, and environmental problems inherent in its development and potential deployment. Before any development is embarked on, steps must be taken to avoid living technology, whatever the term eventually designates, becoming available for destructive or antisocial purposes such as those that might devastate humanity or irrevocably damage the natural world.

An accelerated fusion power development plan

NASA Astrophysics Data System (ADS)

Dean, Stephen O.; Baker, Charles C.; Cohn, Daniel R.; Kinkead, Susan D.

1991-06-01

Energy for electricity and transportation is a national issue with worldwide environmental and political implications. The world must have energy options for the next century that are not vulnerable to possible disruption for technical, environmental, public confidence, or other reasons. Growing concerns about the greenhouse effect and the safety of transporting oil may lead to reduced burning of coal and other fossil fuels, and the incidents at Three Mile Island and Chernobyl, as well as nuclear waste storage problems, have eroded public acceptance of nuclear fission. Meeting future world energy needs will require improvements in energy efficiency and conservation. However, the world will soon need new central station power plants and increasing amounts of fuel for the transportation sector. The use of fossil fuels, and possibly even fission power, will very likely be restricted because of environmental, safety, and, eventually, supply considerations. Time is running out for policymakers. New energy technologies cannot be brought to the marketplace overnight. Decades are required to bring a new energy production technology from conception to full market penetration. With the added urgency to mitigate deleterious environmental effects of energy use, policymakers must act decisively now to establish and support vigorous energy technology development programs. The U.S. has invested 8 billion over the past 40 years in fusion research and development. If the U.S. fusion program proceeds according to its present strategy, an additional 40 years, and more money, will be expended before fusion will provide commercial electricity. Such an extended schedule is neither cost-effective nor technically necessary. It is time to launch a national venture to construct and operate a fusion power pilot plant. Such a plant could be operational within 15 years of a national commitment to proceed.

Wireless smart meters and public acceptance: the environment, limited choices, and precautionary politics.

PubMed

Hess, David J; Coley, Jonathan S

2014-08-01

Wireless smart meters (WSMs) promise numerous environmental benefits, but they have been installed without full consideration of public acceptance issues. Although societal-implications research and regulatory policy have focused on privacy, security, and accuracy issues, our research indicates that health concerns have played an important role in the public policy debates that have emerged in California. Regulatory bodies do not recognize non-thermal health effects for non-ionizing electromagnetic radiation, but both homeowners and counter-experts have contested the official assurances that WSMs pose no health risks. Similarities and differences with the existing social science literature on mobile phone masts are discussed, as are the broader political implications of framing an alternative policy based on an opt-out choice. The research suggests conditions under which health-oriented precautionary politics can be particularly effective, namely, if there is a mandatory technology, a network of counter-experts, and a broader context of democratic contestation.

Vehicle-to-Vehicle crash avoidance technology : public acceptance final report.

DOT National Transportation Integrated Search

2015-12-01

The Vehicle-to-Vehicle (V2V) Crash Avoidance Public Acceptance report summarizes data from a survey of the current level of awareness and acceptance of V2V technology. The survey was guided by findings from prior studies and 12 focus groups. A total ...

The History of UTAUT Model and Its Impact on ICT Acceptance and Usage by Academicians

ERIC Educational Resources Information Center

Oye, N. D.; Iahad, N. A.; Rahim, N. Ab.

2014-01-01

This paper started with the review of the history of technology acceptance model from TRA to UTAUT. The expected contribution is to bring to lime light the current development stage of the technology acceptance model. Based on this, the paper examined the impact of UTAUT model on ICT acceptance and usage in HEIs. The UTAUT model theory was…

Privacy versus autonomy: a tradeoff model for smart home monitoring technologies.

PubMed

Townsend, Daphne; Knoefel, Frank; Goubran, Rafik

2011-01-01

Smart homes are proposed as a new location for the delivery of healthcare services. They provide healthcare monitoring and communication services, by using integrated sensor network technologies. We validate a hypothesis regarding older adults' adoption of home monitoring technologies by conducting a literature review of articles studying older adults' attitudes and perceptions of sensor technologies. Using current literature to support the hypothesis, this paper applies the tradeoff model to decisions about sensor acceptance. Older adults are willing to trade privacy (by accepting a monitoring technology), for autonomy. As the information captured by the sensor becomes more intrusive and the infringement on privacy increases, sensors are accepted if the loss in privacy is traded for autonomy. Even video cameras, the most intrusive sensor type were accepted in exchange for the height of autonomy which is to remain in the home.

Continuing challenges for computer-based neuropsychological tests.

PubMed

Letz, Richard

2003-08-01

A number of issues critical to the development of computer-based neuropsychological testing systems that remain continuing challenges to their widespread use in occupational and environmental health are reviewed. Several computer-based neuropsychological testing systems have been developed over the last 20 years, and they have contributed substantially to the study of neurologic effects of a number of environmental exposures. However, many are no longer supported and do not run on contemporary personal computer operating systems. Issues that are continuing challenges for development of computer-based neuropsychological tests in environmental and occupational health are discussed: (1) some current technological trends that generally make test development more difficult; (2) lack of availability of usable speech recognition of the type required for computer-based testing systems; (3) implementing computer-based procedures and tasks that are improvements over, not just adaptations of, their manually-administered predecessors; (4) implementing tests of a wider range of memory functions than the limited range now available; (5) paying more attention to motivational influences that affect the reliability and validity of computer-based measurements; and (6) increasing the usability of and audience for computer-based systems. Partial solutions to some of these challenges are offered. The challenges posed by current technological trends are substantial and generally beyond the control of testing system developers. Widespread acceptance of the "tablet PC" and implementation of accurate small vocabulary, discrete, speaker-independent speech recognition would enable revolutionary improvements to computer-based testing systems, particularly for testing memory functions not covered in existing systems. Dynamic, adaptive procedures, particularly ones based on item-response theory (IRT) and computerized-adaptive testing (CAT) methods, will be implemented in new tests that will be more efficient, reliable, and valid than existing test procedures. These additional developments, along with implementation of innovative reporting formats, are necessary for more widespread acceptance of the testing systems.

Consumer acceptance of technology-based food innovations: lessons for the future of nutrigenomics.

PubMed

Ronteltap, A; van Trijp, J C M; Renes, R J; Frewer, L J

2007-07-01

Determinants of consumer adoption of innovations have been studied from different angles and from the perspectives of various disciplines. In the food area, the literature is dominated by a focus on consumer concern. This paper reviews previous research into acceptance of technology-based innovation from both inside and outside the food domain, extracts key learnings from this literature and integrates them into a new conceptual framework for consumer acceptance of technology-based food innovations. The framework distinguishes 'distal' and 'proximal' determinants of acceptance. Distal factors (characteristics of the innovation, the consumer and the social system) influence consumers' intention to accept an innovation through proximal factors (perceived cost/benefit considerations, perceptions of risk and uncertainty, social norm and perceived behavioural control). The framework's application as a tool to anticipate consumer reaction to future innovations is illustrated for an actual technology-based innovation in food science, nutrigenomics (the interaction between nutrition and human genetics).

[Identification of capacities in environmental health from environmental authorities in Colombia].

PubMed

Agudelo-Calderón, Carlos A; García-Ubaque, Juan C; Robledo-Martínez, Rocío; García-Ubaque, Cesar A; Vaca-Bohórquez, Martha L

2016-08-01

Objectives To diagnose the capabilities that environmental authorities and the Ministry of Environment and Sustainable Development have to assume their role in environmental health, based on the capacity model of the United Nations Program for Development UNDP. Method Document review, interviews on key issues and a commented survey were conducted. 84 entities were selected for a tailored survey; complete information was obtained from 76 institutions. Results The valuation of environment favorability was within the acceptable and unfavorable categories; knowledge management capabilities were found to be precarious and assessment of functional capabilities ranged between appropriate and acceptable. The assessment of specific capabilities had a rating of poor or barely acceptable. Conclusions Two major problems were found: a. The environmental authorities do not conceive or implement these capabilities based on the UNDP model but on the conventional model of the Ministry of Environment, Housing and Territorial Development; b. Environmental authorities show an incipient level of incorporation of environmental health policies in their field of action.

Nursing acceptance of a speech-input interface: a preliminary investigation.

PubMed

Dillon, T W; McDowell, D; Norcio, A F; DeHaemer, M J

1994-01-01

Many new technologies are being developed to improve the efficiency and productivity of nursing staffs. User acceptance is a key to the success of these technologies. In this article, the authors present a discussion of nursing acceptance of computer systems, review the basic design issues for creating a speech-input interface, and report preliminary findings of a study of nursing acceptance of a prototype speech-input interface. Results of the study showed that the 19 nursing subjects expressed acceptance of the prototype speech-input interface.

Factors influencing residents' acceptance (support) of remediation technologies.

PubMed

Prior, Jason

2018-05-15

An increasing diversity of technologies are being used to remediate contaminated sites, yet there remains little understanding of the level of acceptance that residents living near these sites hold for these technologies, and what factors influence their level of acceptance. This lack of understanding hinders the remediation industry's ability to effectively engage with these residents about remediation technology selection, at a time when such engagement is become part and parcel of remediation policy and practice. The study develops on wider research into public acceptance of technologies, using data from a telephone survey of 2009 residents living near thirteen contaminated sites across Australia. Within the survey acceptance is measured through residents' level of support for the application of remediation technologies in their local area. Firstly, a regression analysis of closed-ended questions, and coding of open-ended questions are combined to identify the main predictors of residents' support for remediation technologies. Secondly, coding of open-ended questions was analysed using Crawford and Ostrom's Institutional Grammar Tool to identify norms and sanctions guiding residents' willingness to negotiate their support. The research identifies factors associated with the residents' personal and demographic characteristics, their physical context and engagement with institution during remediation processes, and the technologies themselves which predict residents' level of support for the application of remediation technologies. Bioremediation technologies had higher levels of support than chemical, thermal and physical technologies. Furthermore, the paper identifies a core set of norms and sanctions residents use to negotiate their level of support for remediation technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

What factors determine therapists' acceptance of new technologies for rehabilitation – a study using the Unified Theory of Acceptance and Use of Technology (UTAUT).

PubMed

Liu, Lili; Miguel Cruz, Antonio; Rios Rincon, Adriana; Buttar, Vickie; Ranson, Quentin; Goertzen, Darrell

2015-01-01

The aim of this study was to examine what factors affect the acceptance behavior and use of new technologies for rehabilitation by therapists at a large rehabilitation hospital in Canada. A self-administrated paper-based survey was created by adapting scales with high levels of internal consistency in prior research using the Unified Theory of Acceptance and Use of Technology (UTAUT). Items were scored on a 7-point Likert scale, ranging from "strongly disagree (1)" to "strongly agree (7)". The target population was all occupational therapists (OT) and physical therapists (PT) involved with the provision of therapeutic interventions at the hospital. Our research model was tested using partial least squares (PLS) technique. Performance expectancy was the strongest salient construct for behavioral intention to use new technologies in rehabilitation, whereas neither effort expectancy nor social influence were salient constructs for behavioral intention to use new technologies; (4) facilitating condition and behavioral intention to use new technologies were salient constructs for current use of new technologies in rehabilitation, with facilitating condition the strongest salient for current use of new technologies in rehabilitation. In a large rehabilitation hospital where use of new technologies in rehabilitation is not mandatory, performance expectancy, or how the technology can help in therapists' work, was the most important factor in determining therapists' acceptance and use of technologies. However, effort expectancy and social influence constructs were not important, i.e. therapists were not influenced by the degree of difficulty or social pressures to use technologies. Behavioral intention and facilitating condition, or institutional support, are related to current use of new technologies in rehabilitation.

Factors influencing the adoption of health information technologies: a systematic review

PubMed Central

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-01-01

Introduction The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. Methods This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004–2014 period. Results The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. Conclusion By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased. PMID:27757179

Factors influencing the adoption of health information technologies: a systematic review.

PubMed

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-08-01

The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004-2014 period. The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased.

Technology Acceptance Model for Wireless Internet.

ERIC Educational Resources Information Center

Lu, June; Yu, Chun-Sheng; Liu, Chang; Yao, James E.

2003-01-01

Develops a technology acceptance model (TAM) for wireless Internet via mobile devices (WIMD) and proposes that constructs, such as individual differences, technology complexity, facilitating conditions, social influences, and wireless trust environment determine user-perceived short and long-term usefulness, and ease of using WIMD. Twelve…

Use Technology

ERIC Educational Resources Information Center

Teo, Timothy

2013-01-01

Technology acceptance is posited to be influenced by a variety of factors, including individual differences, social influences, beliefs, attitudes and situational influences (Agarwal, 2000; Teo, 2009a). A majority of the conceptualisations of technology acceptance have drawn on theories and models from social psychology, notably the theory of…

The Technology Acceptance of Mobile Applications in Education

ERIC Educational Resources Information Center

Camilleri, Mark Anthony; Camilleri, Adriana Caterina

2017-01-01

This research explores the educators' attitudes and behavioural intention toward mobile applications. The methodology integrates measures from "the pace of technological innovativeness" and the "technology acceptance model" to understand the rationale for further investment in mobile learning (m-learning). A quantitative study…

Measuring the Moderating Effect of Gender and Age on E-Learning Acceptance in England: A Structural Equation Modeling Approach for an Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Tarhini, Ali; Hone, Kate; Liu, Xiaohui

2014-01-01

The success of an e-learning intervention depends to a considerable extent on student acceptance and use of the technology. Therefore, it has become imperative for practitioners and policymakers to understand the factors affecting the user acceptance of e-learning systems in order to enhance the students' learning experience. Based on an extended…

Primary care for adults on the autism spectrum.

PubMed

Nicolaidis, Christina; Kripke, Clarissa Calliope; Raymaker, Dora

2014-09-01

Autism spectrum disorder (ASD) is defined by differences in social communication and restricted, repetitive patterns of behavior, interests, or activities. Skills and challenges can change depending on environmental stimuli, supports, and stressors. Quality of life can be improved by the use of accommodations, assistive technologies, therapies to improve adaptive function or communication, caregiver training, acceptance, access, and inclusion. This article focuses on the identification of ASD in adults, referrals for services, the recognition of associated conditions, strategies and accommodations to facilitate effective primary care services, and ethical issues related to caring for autistic adults. Copyright © 2014 Elsevier Inc. All rights reserved.

Compensation opportunities and waste-to-energy plants

NASA Astrophysics Data System (ADS)

Rada, E. C.; Castagna, G.; Adami, L.; Torretta, V.; Ragazzi, M.

2018-05-01

Compensations are part of the pathway of design of a thermochemical plant. The evolution of the technology of this sector, integrated with adequate mitigations, can allow reaching a level of environmental impact that can be negligible locally. In spite of that, the local acceptance of modern plants is still critical. The global impact on the environment is more complex to define because of the variability of input of the plants. In this context, the role of compensations is very important, opening also to interesting opportunities for the territory, as demonstrated by the analysis reported in this article.

Lean, premixed, prevaporized combustion for aircraft gas turbine engines

NASA Technical Reports Server (NTRS)

Mularz, E. J.

1979-01-01

The application of lean, premixed, prevaporized combustion to aircraft turbine engine systems can result in benefits in terms of superior combustion performance, improved combustor and turbine durability, and environmentally acceptable pollutant emissions. Lean, premixed prevaporized combustion is particularly attractive for reducing the oxides of nitrogen emissions during high altitude cruise. The NASA stratospheric cruise emission reduction program will evolve and demonstrate lean, premixed, prevaporized combustion technology for aircraft engines. This multiphased program is described. In addition, the various elements of the fundamental studies phase of the program are reviewed, and results to date of many of these studies are summarized.

Conceptual design of closed Brayton cycle for coal-fired power generation

NASA Technical Reports Server (NTRS)

Shah, R. P.; Corman, J. C.

1977-01-01

The objectives to be realized in developing a closed cycle gas turbine are (1) to exploit high temperature gas turbine technology while maintaining a working fluid which is free from combustion gas contamination, (2) to achieve compact turbo-equipment designs through pressurization of the working fluid, and (3) to obtain relatively simple cycle configurations. The technical/economic performance of a specific closed cycle gas turbine system was evaluated through the development of a conceptual plant and system design. This energy conversion system is designed for electric utility service and to utilize coal directly in an environmentally acceptable manner.

Wealth generation through recycling of material for reuse

NASA Astrophysics Data System (ADS)

Chukwudum, Okechukw John; Patience I., E.

2018-06-01

Management of solid waste needs appropriate technology, which is economically affordable, socially accepted and environmentally friendly. The public needs to be sensitized on the potential wealth that their inorganic and organic wastes contain. The paper deals with the idea of recycling as a means of solid waste treatment and explores. In developing countries, where standards are often lower and raw materials very expensive, there is a wider scope for use of recycled material. The range of products varies from building materials to shoes, home to office equipment, sewage pipe to beauty aids. Recyclingand reuse issues overlap a range of disciplines.

Fluvial geomorphology and river engineering: future roles utilizing a fluvial hydrosystems framework

NASA Astrophysics Data System (ADS)

Gilvear, David J.

1999-12-01

River engineering is coming under increasing public scrutiny given failures to prevent flood hazards and economic and environmental concerns. This paper reviews the contribution that fluvial geomorphology can make in the future to river engineering. In particular, it highlights the need for fluvial geomorphology to be an integral part in engineering projects, that is, to be integral to the planning, implementation, and post-project appraisal stages of engineering projects. It should be proactive rather than reactive. Areas in which geomorphologists will increasingly be able to complement engineers in river management include risk and environmental impact assessment, floodplain planning, river audits, determination of instream flow needs, river restoration, and design of ecologically acceptable channels and structures. There are four key contributions that fluvial geomorphology can make to the engineering profession with regard to river and floodplain management: to promote recognition of lateral, vertical, and downstream connectivity in the fluvial system and the inter-relationships between river planform, profile, and cross-section; to stress the importance of understanding fluvial history and chronology over a range of time scales, and recognizing the significance of both palaeo and active landforms and deposits as indicators of levels of landscape stability; to highlight the sensitivity of geomorphic systems to environmental disturbances and change, especially when close to geomorphic thresholds, and the dynamics of the natural systems; and to demonstrate the importance of landforms and processes in controlling and defining fluvial biotopes and to thus promote ecologically acceptable engineering. Challenges facing fluvial geomorphology include: gaining full acceptance by the engineering profession; widespread utilization of new technologies including GPS, GIS, image analysis of satellite and airborne remote sensing data, computer-based hydraulic modeling and geophysical techniques; dovetailing engineering approaches to the study of river channels which emphasize reach-scale flow resistance, shear stresses, and material strength with catchment scale geomorphic approaches, empirical predictions, bed and bank processes, landform evolution, and magnitude-frequency concepts; producing accepted river channel typologies; fundamental research aimed at producing more reliable deterministic equations for prediction of bed and bank stability and bedload transport; and collaboration with aquatic biologists to determine the role and importance of geomorphologically and hydraulically defined habitats.

Measuring Technology Acceptance Level of Teachers by Using Unified Theory of Acceptance and Use of Technology

ERIC Educational Resources Information Center

Koral Gümüsoglu, Eylem; Akay, Emel

2017-01-01

Technology has undergone a lot of radical changes in the last years which have caused the implemention of new paradigms in different sectors. It is almost impossible for education not to be affected from this change in technology. It has shifted from the traditional applications to the technology use in the classrooms. In this case, teachers' role…

Waste and racism: A stacked deck

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bullard, R.D.

It has been difficult for many blacks to say, Not in My Backyard.' Many of them don't even have a backyard, according to the author in describing what he calls environmental racism.' He defines environmental racism as the systematic targeting of black communities for the siting of sewer treatment plants, landfills, incinerators, hazardous-waste disposal sites, lead smelters, and other risky technologies.' Historically, poor and minority communities have received a disproportionate share of such facilities. Few are located in the suburbs, where most middle-class whites live. Today, Latino neighborhoods and Indian reservations also are feeling the impact of discriminatory siting decisions.more » The author feels state governments have done a miserable job of protecting minority communities from the ravages of industrial pollution. After placidly accepting their fate for years, many of the communities are fighting back, challenging siting decisions on equity grounds in state and federal courts and organizing a national movement against environmental injustice.« less

When is genetic modification socially acceptable? When used to advance human health through avenues other than food.

PubMed

Olynk Widmar, Nicole J; Dominick, S R; Tyner, Wallace E; Ruple, Audrey

2017-01-01

Given the potential for genetic modification (GM) to impact human health, via food and health mechanisms, a greater understanding of the social acceptance of GM is necessary to facilitate improved health outcomes. This analysis sought to quantify U.S. residents' acceptance of GM across five potential uses (grain production, fruit or vegetable production, livestock production, human medicine, and human health, i.e. disease vector control) and provides an in-depth analysis of a timely case study-the Zika virus (ZIKV). The two categories with the highest levels of acceptance for GM use were human medicine (62% acceptance) and human health (68% acceptance); the proportions agreeing with the use of GM for these two categories were statistically different from all other categories. Acceptance of GM in food uses revealed 44% of the sample accepted the use of GM in livestock production while grain production and fruit and vegetable production showed similar levels of agreement with 49% and 48% of responses, respectively. Two variables were significant in all five models predicting GM acceptance; namely, being male and GM awareness. Being male was significant and positive for all models; respondents who reported being male were more likely (than those who reported female) to agree with all five of the uses of GM studied. Those who were reportedly aware of GM mosquito technology were also more likely to agree with all uses of GM technology investigated. The potential relationship between awareness of GM technology uses and acceptance of other uses could help inform rates of acceptance of new technologies by various population segments.

When is genetic modification socially acceptable? When used to advance human health through avenues other than food

PubMed Central

Olynk Widmar, Nicole J.; Tyner, Wallace E.; Ruple, Audrey

2017-01-01

Given the potential for genetic modification (GM) to impact human health, via food and health mechanisms, a greater understanding of the social acceptance of GM is necessary to facilitate improved health outcomes. This analysis sought to quantify U.S. residents’ acceptance of GM across five potential uses (grain production, fruit or vegetable production, livestock production, human medicine, and human health, i.e. disease vector control) and provides an in-depth analysis of a timely case study–the Zika virus (ZIKV). The two categories with the highest levels of acceptance for GM use were human medicine (62% acceptance) and human health (68% acceptance); the proportions agreeing with the use of GM for these two categories were statistically different from all other categories. Acceptance of GM in food uses revealed 44% of the sample accepted the use of GM in livestock production while grain production and fruit and vegetable production showed similar levels of agreement with 49% and 48% of responses, respectively. Two variables were significant in all five models predicting GM acceptance; namely, being male and GM awareness. Being male was significant and positive for all models; respondents who reported being male were more likely (than those who reported female) to agree with all five of the uses of GM studied. Those who were reportedly aware of GM mosquito technology were also more likely to agree with all uses of GM technology investigated. The potential relationship between awareness of GM technology uses and acceptance of other uses could help inform rates of acceptance of new technologies by various population segments. PMID:28591218

[Willingness to accept an Internet-based mobility platform in different age cohorts. Empiric results of the project S-Mobil 100].

PubMed

Beil, J; Cihlar, V; Kruse, A

2015-02-01

The aim of the project S-Mobil 100 is to develop and implement a prototype of an internet-based, generation-appropriate mobility platform in the model region Siegen-Wittgenstein. In the context of an empirical preliminary study, use of technology, experience with technology, general attitudes towards technology, general technology commitment, and the willingness to accept the mobility platform were investigated in different age cohorts. The investigation was carried out using a written survey based on a standardized questionnaire. The sample of 358 persons aged 40-90 years was divided in four age cohorts (40-54, 55-64, 65-74, and 75 + years). Our results show a high willingness to accept the mobility platform in the overall sample. Age, residence, income, and general technology commitment were significant predictors for the judgment of the platform. Although there were group differences in accepting the mobility platform, the older cohorts are also open-minded towards this new technology.

Factors Influencing Agricultural Leadership Students' Behavioral Intentions: Examining the Potential Use of Mobile Technology in Courses

ERIC Educational Resources Information Center

Strong, Robert; Irby, Travis L.; Dooley, Larry M.

2013-01-01

Mobile technology is pervasive at institutions across the U.S. The study was framed with self-efficacy theory, self-directed learning theory, and the unified theory for acceptance and use of technology. The purpose of this study was to assess undergraduate students' behavioral intention towards mobile technology acceptance in agricultural…

Understanding Student Teachers' Behavioural Intention to Use Technology: Technology Acceptance Model (TAM) Validation and Testing

ERIC Educational Resources Information Center

Wong, Kung-Teck; Osman, Rosma bt; Goh, Pauline Swee Choo; Rahmat, Mohd Khairezan

2013-01-01

This study sets out to validate and test the Technology Acceptance Model (TAM) in the context of Malaysian student teachers' integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA), and structural equation…

Framing Innovation: The Impact of the Superintendent's Technology Infrastructure Decisions on the Acceptance of Large-Scale Technology Initiatives

ERIC Educational Resources Information Center

Arnold, Erik P.

2014-01-01

A multiple-case qualitative study of five school districts that had implemented various large-scale technology initiatives was conducted to describe what superintendents do to gain acceptance of those initiatives. The large-scale technology initiatives in the five participating districts included 1:1 District-Provided Device laptop and tablet…

Utilization of Multimedia Laboratory: An Acceptance Analysis using TAM

NASA Astrophysics Data System (ADS)

Modeong, M.; Palilingan, V. R.

2018-02-01

Multimedia is often utilized by teachers to present a learning materials. Learning that delivered by multimedia enables people to understand the information of up to 60% of the learning in general. To applying the creative learning to the classroom, multimedia presentation needs a laboratory as a space that provides multimedia needs. This study aims to reveal the level of student acceptance on the multimedia laboratories, by explaining the direct and indirect effect of internal support and technology infrastructure. Technology Acceptance Model (TAM) is used as the basis of measurement on this research, through the perception of usefulness, ease of use, and the intention, it’s recognized capable of predicting user acceptance about technology. This study used the quantitative method. The data analysis using path analysis that focuses on trimming models, it’s performed to improve the model of path analysis structure by removing exogenous variables that have insignificant path coefficients. The result stated that Internal Support and Technology Infrastructure are well mediated by TAM variables to measure the level of technology acceptance. The implications suggest that TAM can measure the success of multimedia laboratory utilization in Faculty of Engineering UNIMA.

Preservice Teachers' Acceptance of ICT Integration in the Classroom: Applying the UTAUT Model

ERIC Educational Resources Information Center

Birch, A.; Irvine, V.

2009-01-01

In this study, the researchers explore the factors that influence preservice teachers' acceptance of information and communication technology (ICT) integration in the classroom. The Unified Theory of Acceptance and Use of Technology (UTAUT) was developed by Venkatesh et al. ["MIS Quarterly, 27"(3), 425-478] in 2003 and shown to…

An Investigation of Employees' Use of E-Learning Systems: Applying the Technology Acceptance Model

ERIC Educational Resources Information Center

Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Chen, Yen-Hsun

2013-01-01

The purpose of this study is to apply the technology acceptance model to examine the employees' attitudes and acceptance of electronic learning (e-learning) systems in organisations. This study examines four factors (organisational support, computer self-efficacy, prior experience and task equivocality) that are believed to influence employees'…

Examining the Moderating Effect of Individual-Level Cultural Values on Users' Acceptance of E-Learning in Developing Countries: A Structural Equation Modeling of an Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Tarhini, Ali; Hone, Kate; Liu, Xiaohui; Tarhini, Takwa

2017-01-01

In this study, we examine the effects of individual-level culture on the adoption and acceptance of e-learning tools by students in Lebanon using a theoretical framework based on the Technology Acceptance Model (TAM). To overcome possible limitations of using TAM in developing countries, we extend TAM to include "subjective norms" (SN)…

Ageing-in-place with the use of ambient intelligence technology: perspectives of older users.

PubMed

van Hoof, J; Kort, H S M; Rutten, P G S; Duijnstee, M S H

2011-05-01

Ambient intelligence technologies are a means to support ageing-in-place by monitoring clients in the home. In this study, monitoring is applied for the purpose of raising an alarm in an emergency situation, and thereby, providing an increased sense of safety and security. Apart from these technological solutions, there are numerous environmental interventions in the home environment that can support people to age-in-place. The aim of this study was to investigate the needs and motives, related to ageing-in-place, of the respondents receiving ambient intelligence technologies, and to investigate whether, and how, these technologies contributed to aspects of ageing-in-place. This paper presents the results of a qualitative study comprised of interviews and observations of technology and environmental interventions in the home environment among 18 community-dwelling older adults with a complex demand for care. These respondents had a prototype of the Unattended Autonomous Surveillance system, an example of ambient intelligence technology, installed in their homes as a means to age-in-place. The UAS-system offers a large range of functionalities, including mobility monitoring, voice response, fire detection, as well as wandering detection and prevention, which can be installed in different configurations. The respondents had various motives to use ambient intelligence technologies to support ageing-in-place. The most prominent reason was to improve the sense of safety and security, in particular, in case of fall incidents, when people were afraid not to be able to use their existing emergency response systems. The ambient intelligence technologies were initially seen as a welcome addition to strategies already adopted by the respondents, including a variety of home modifications and assistive devices. The systems tested increased the sense of safety and security and helped to postpone institutionalisation. Respondents came up with a set of specifications in terms of the operation and the design of the technology. False alarms were also regarded as a sign that the ambient intelligence technology is functioning. Moreover, a good integration of the new technologies in the provision of health care is indispensable, and installation should be done in an acceptable and unobtrusive manner. Ambient intelligence technologies can contribute to an increased safety and security at home. The technologies alone offer no all encompassing solution as home care and additional environmental interventions are still needed to support ageing-in-place. Results of the study are used to further improve the ambient intelligence technologies and their implementation. 2011 Elsevier Ireland Ltd. All rights reserved.

Mobile Health Technology Using a Wearable Sensorband for Female College Students With Problem Drinking: An Acceptability and Feasibility Study

PubMed Central

Silverman, Michelle; Sherpa, Dawa Phuti; Naegle, Madeline A; Kim, Hyorim; Coffman, Donna L; Ferdschneider, Marcy

2017-01-01

Background An increasing number of mobile app interventions have been developed for problem drinking among college students; however, few studies have examined the integration of a mobile app with continuous physiological monitoring and alerting of affective states related to drinking behaviors. Objective The aim of this paper was to evaluate the acceptability and feasibility of Mind the Moment (MtM), a theoretically based intervention for female college students with problem drinking that combines brief, in-person counseling with ecological momentary intervention (EMI) on a mobile app integrated with a wearable sensorband. Methods We recruited 10 non-treatment seeking, female undergraduates from a university health clinic who scored a 3 or higher on the Alcohol Use Disorders Identification Test–Consumption (AUDIT-C) to participate in this pilot study. Study activities involved an in-person baseline intake and 1 follow-up assessment, 2 in-person alcohol brief intervention counseling sessions, and use of MtM technology components (sensorband and EMI on a mobile app) for approximately 3-4 weeks. The intervention used motivational interviewing (MI) and cognitive behavioral therapy (CBT) strategies for reducing risks associated with drinking. We used both qualitative and quantitative assessments to measure acceptability of the intervention and feasibility of delivery. Use patterns of the sensorband and mobile app were also collected. Results Quantitative and qualitative data indicated high levels of acceptability for the MtM intervention. Altogether, participants made reports on the app on 26.7% (78/292) the days the technology was available to them and completed a total of 325 reports with wide variation between participants. Qualitative findings indicated that sensorband-elicited alerts promoted an increase in awareness of thoughts, feelings, and behaviors related to current environmental stressors and drinking behaviors in theoretically meaningful ways. Specific challenges related to functionality and form of the sensorband were identified. Conclusions Delivering intervention material “just-in-time,” at the moment participants need to use behavioral strategies has great potential to individualize behavioral interventions for reducing problem drinking and other health behaviors. These findings provide initial evidence for the promise of wearable sensors for increasing potency of theoretically grounded mobile health interventions and point to directions for future research and uptake of these technologies. PMID:28687533

Factors affecting home care patients' acceptance of a web-based interactive self-management technology

PubMed Central

Karsh, Ben-Tzion; Severtson, Dolores J; Burke, Laura J; Brown, Roger L; Brennan, Patricia Flatley

2010-01-01

Objective With the advent of personal health records and other patient-focused health technologies, there is a growing need to better understand factors that contribute to acceptance and use of such innovations. In this study, we employed the Unified Theory of Acceptance and Use of Technology as the basis for determining what predicts patients' acceptance (measured by behavioral intention) and perceived effective use of a web-based, interactive self-management innovation among home care patients. Design Cross-sectional secondary analysis of data from a randomized field study evaluating a technology-assisted home care nursing practice with adults with chronic cardiac disease. Measurement and analysis A questionnaire was designed based on validated measurement scales from prior research and was completed by 101 participants for measuring the acceptance constructs as part of the parent study protocol. Latent variable modeling with item parceling guided assessment of patients' acceptance. Results Perceived usefulness accounted for 53.9% of the variability in behavioral intention, the measure of acceptance. Together, perceived usefulness, health care knowledge, and behavioral intention accounted for 68.5% of the variance in perceived effective use. Perceived ease of use and subjective norm indirectly influenced behavioral intention, through perceived usefulness. Perceived ease of use and subjective norm explained 48% of the total variance in perceived usefulness. Conclusion The study demonstrates that perceived usefulness, perceived ease of use, subjective norm, and healthcare knowledge together predict most of the variance in patients' acceptance and self-reported use of the web-based self-management technology. PMID:21131605

Overview of environmental investigations and remediations of leaks and spills in oil and gas fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobs, J.A.; Jacobs, O.T.; Traver, R.

Historic and current leaks and spills in oil and gas fields can involve a variety of hazardous compounds, can be located virtually anywhere on site, and may significantly degrade soils and groundwater quality. Environmental evaluation of historic and current leaks and spills in oil and gas fields occurs in the investigative stage, characterized by a site assessment and field evaluation. The site assessment includes a site survey, aerial photo interpretation, review of regulatory agency records, operators' records, previous work by consultants, and interviews with knowledgeable persons. The field evaluation, designed to examine the lateral and vertical extent of the spillmore » or leak, could include a soil gas survey, cone penetrometer, trenching, and drilling. Using these techniques, collected soil or groundwater samples can be analyzed in a laboratory to differentiate the various hazardous compounds on-site. Once an environmental investigation has been performed to define the vertical and lateral extent of a spill and the potential pathways that the hazardous compound will move to expose a given population, then remediation options can be designed. Remedial programs for hazardous compounds commonly found in oil and gas fields include the following in-situ technologies: volatilization, biodegradation, leaching and chemical reaction, vitrification, passive remediation, and isolation/containment. Non-in-situ technologies include land farming, incineration, asphalt incorporation, solidification/stabilization, groundwater extraction and treatment, chemical extraction, and excavation and offsite disposal. Factors affecting remedial measures are cost of technology, time available to finish remediation, technical feasibility, regulatory acceptance, and accessibility and availability of space in the remediation area.« less

Emerging Educational Technology: Assessing the Factors that Influence Instructors' Acceptance in Information Systems and Other Classrooms

ERIC Educational Resources Information Center

Ball, Diane M.; Levy, Yair

2008-01-01

Over the past decade there has been a shift in the emphasis of Internet-based emerging educational technology from use in online settings to supporting face-to-face and mixed delivery classes. Although emerging educational technology integration in the classroom has been led by information systems (IS) instructors, the technology acceptance and…

Perceived Convenience in an Extended Technology Acceptance Model: Mobile Technology and English Learning for College Students

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Yan, Chi-Fang; Tseng, Ju-Shih

2012-01-01

Since convenience is one of the features for mobile learning, does it affect attitude and intention of using mobile technology? The technology acceptance model (TAM), proposed by David (1989), was extended with perceived convenience in the present study. With regard to English language mobile learning, the variables in the extended TAM and its…

Examining the Intention to Use Technology among Pre-Service Teachers: An Integration of the Technology Acceptance Model and Theory of Planned Behavior

ERIC Educational Resources Information Center

Teo, Timothy

2012-01-01

This study examined pre-service teachers' self-reported intention to use technology. One hundred fifty-seven participants completed a survey questionnaire measuring their responses to six constructs from a research model that integrated the Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB). Structural equation modeling was…

Efficiency of the Technology Acceptance Model to Explain Pre-Service Teachers' Intention to Use Technology: A Turkish Study

ERIC Educational Resources Information Center

Teo, Timothy; Ursavas, Omer Faruk; Bahcekapili, Ekrem

2011-01-01

Purpose: The purpose of this study is to assess the efficiency of the technology acceptance model (TAM) to explain pre-service teachers' intention to use technology in Turkey. Design/methodology/approach: A total of 197 pre-service teachers from a Turkish university completed a survey questionnaire measuring their responses to four constructs…

Encouraging Learning of Industry Technology: A Merchandising Example

ERIC Educational Resources Information Center

Reilly, Andrew; Huss, Megan; Stoel, Leslie

2005-01-01

The application of the technology acceptance model to a merchandising course teaching industry software was evaluated. Based on technology acceptance research, industry software was presented emphasizing ease-of-use and usefulness. The final course project gave students a quasi real-life experience of combining merchandising skills with the…

Exploring Students Acceptance of E-Learning Using Technology Acceptance Model in Jordanian Universities

ERIC Educational Resources Information Center

Al-Adwan, Amer; Al-Adwan, Ahmad; Smedley, Jo

2013-01-01

Today's rapid changing world highlights the influence and impact of technology in all aspects of learning life. Higher Education institutions in developed Western countries believe that these developments offer rich opportunities to embed technological innovations within the learning environment. This places developing countries, striving to be…

Textbook Websites: User Technology Acceptance Behaviour

ERIC Educational Resources Information Center

Jonas, Gregory A.; Norman, Carolyn Strand

2011-01-01

Compared with course management software (e.g. Blackboard and WebCT), the content and technology offered by a textbook website (TBW) is relatively costless to universities and professors, and is a potentially valuable tool that can be leveraged to help students learn course material. The present study uses the extended Technology Acceptance Model…

"Like Holding an Umbrella Before It Rains": Acceptability of Future Rectal Microbicides Among Men Who Have Sex With Men in India-A Modified Technology Acceptance Model.

PubMed

Chakrapani, Venkatesan; Newman, Peter A; Shunmugam, Murali; Mengle, Shruta; Nelson, Ruban; Rubincam, Clara; Kumar, Pushpesh

2017-07-01

Topical rectal microbicides (RMs) are a new prevention technology in development that aims to reduce the risk of HIV acquisition from anal sex. We examined RM acceptability among men who have sex with men (MSM) in India. We conducted a qualitative exploratory study guided by a modified Technology Acceptance Model, with 10 focus groups ( n = 61) of MSM and 10 key informant interviews. Data were explored using framework analysis. RM acceptability was influenced by technological contexts: perceived usefulness of RMs, perceived ease of use of RM and applicator, and habits around condom and lubricant use; individual and interpersonal contexts: perceived relevance and preferences for product formulation and dosing frequency; and MSM community/social contexts: perceived social approval, RM-related stigma, social support. Implementation of RMs for MSM in India may be supported by multi-level interventions that engage community-based organizations in destigmatizing and distributing RMs, ideally gel-based products that enable on-demand use before sex.

Meeting the challenge of policy-relevant science: lessons from a water resource project

USGS Publications Warehouse

Lamb, Berton L.

1986-01-01

Water resource scientists face complex tasks in evaluating aspects of water projects, but relatively few assessment procedures have been applied and accepted as standard applications. Decision-makers often rely on environmental assessments to evaluate the value and operation of projects. There is often confusion about scientists' role in policy decisions. The scientist can affect policy-making as an expert withess, an advocate or a surrogate. By understanding the policy process, scientists can make their work more “policy relevant.” Using the Terror Lake hydro project in Alaska as a guide, three lessons are discussed: (1) not all problems are able to be solved with technology; (2) policy-relevant technology is rarely imposed on a problem; and (3) the scientist need not just react to the policy process, but can have an impact on how that process unfolds.

Advances in refrigeration and heat transfer engineering

DOE PAGES

Bansal, Pradeep; Cremaschi, Prof. Lorenzo

2015-05-13

This special edition of Science and Technology for the Built Environment (STBE) presents selected high quality papers that were presented at the 15th International Refrigeration and Air Conditioning Conference held at Purdue University during July 14-17 2014. All papers went through the additional review before being finally accepted for publication in this special issue of Science and Technology and the Built Environment. Altogether 20 papers made to this special issue that cover a wide range of topics, including advancements in alternative refrigerants, heat exchangers/heat transfer, nano-fluids, systems design and optimization and modeling approaches. Although CO 2 may perhaps have beenmore » the most researched and popular refrigerant in the past decade, R32 is being seriously considered lately as an alternative and environmentally friendly refrigerant for small systems due to its low Global Warming Potential (GWP).« less

Advances in refrigeration and heat transfer engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bansal, Pradeep; Cremaschi, Prof. Lorenzo

This special edition of Science and Technology for the Built Environment (STBE) presents selected high quality papers that were presented at the 15th International Refrigeration and Air Conditioning Conference held at Purdue University during July 14-17 2014. All papers went through the additional review before being finally accepted for publication in this special issue of Science and Technology and the Built Environment. Altogether 20 papers made to this special issue that cover a wide range of topics, including advancements in alternative refrigerants, heat exchangers/heat transfer, nano-fluids, systems design and optimization and modeling approaches. Although CO 2 may perhaps have beenmore » the most researched and popular refrigerant in the past decade, R32 is being seriously considered lately as an alternative and environmentally friendly refrigerant for small systems due to its low Global Warming Potential (GWP).« less

Science, governance, and public participation: an analysis of decision making on genetic modification in Aotearoa/New Zealand.

PubMed

Kurian, Priya; Wright, Jeanette

2012-05-01

The acceptance of public participation in science and technology governance in liberal democratic contexts is evident in the institutionalization of a variety of mechanisms for participation in recent decades. Yet questions remain about the extent to which institutions have actually transformed their policy practice to embrace democratic governance of techno-scientific decision making. A critical discourse analysis of the response to public participation by the Environmental Risk ManagementAuthority (ERMA), the key decision-making body on genetic modification in Aotearoa/New Zealand, in a specific case demonstrates that ERMA systematically marginalized concerns raised by the public about risk management, ethics, and ecological, economic, and cultural issues in order to give primacy to a positivist, technological worldview. Such delegitimization of public perspectives pre-empts the possibility of the democratic governance of science.

User Acceptance of YouTube for Procedural Learning: An Extension of the Technology Acceptance Model

ERIC Educational Resources Information Center

Lee, Doo Young; Lehto, Mark R.

2013-01-01

The present study was framed using the Technology Acceptance Model (TAM) to identify determinants affecting behavioral intention to use YouTube. Most importantly, this research emphasizes the motives for using YouTube, which is notable given its extrinsic task goal of being used for procedural learning tasks. Our conceptual framework included two…

Information Technologies Pre-Service Teachers' Acceptance of Tablet PCs as an Innovative Learning Tool

ERIC Educational Resources Information Center

Cuhadar, Cem

2014-01-01

The current study is aimed to determine if Turkish IT pre-service teachers' acceptance of tablet PCs is within the framework of the Technology Acceptance Model. The research was patterned as a phenomenological study which is among the qualitative research methods. Participants were eight pre-service teachers studying in Trakya University, Faculty…

Tablet Personal Computer Integration in Higher Education: Applying the Unified Theory of Acceptance and Use Technology Model to Understand Supporting Factors

ERIC Educational Resources Information Center

Moran, Mark; Hawkes, Mark; El Gayar, Omar

2010-01-01

Many educational institutions have implemented ubiquitous or required laptop, notebook, or tablet personal computing programs for their students. Yet, limited evidence exists to validate integration and acceptance of the technology among student populations. This research examines student acceptance of mobile computing devices using a modification…

Pharmacy workers’ perceptions and acceptance of bar coded medication technology in a pediatric hospital

PubMed Central

Holden, Richard J.; Brown, Roger L.; Scanlon, Matthew C.; Karsh, Ben-Tzion

2012-01-01

Background The safety benefits of bar-coded medication dispensing and administration technology (BCMA) depend on its intended users favorably perceiving, accepting, and ultimately using the technology. Objectives (1) To describe pharmacy workers’ perceptions and acceptance of a recently implemented BCMA system and (2) to model the relationship between perceptions and acceptance of BCMA. Methods Pharmacists and pharmacy technicians at a Midwest US pediatric hospital were surveyed following the hospital’s implementation of a BCMA system. Twenty-nine pharmacists and ten technicians’ self-reported perceptions and acceptance of the BCMA system were analyzed, supplemented by qualitative observational and free-response survey data. Perception-acceptance associations were analyzed using structural models. Results The BCMA system’s perceived ease of use was rated low by pharmacists and moderate by pharmacy technicians. Both pharmacists and technicians perceived that the BCMA system was not useful for improving either personal job performance or patient care. Pharmacy workers perceived that individuals important to them encouraged BMCA use. Pharmacy workers generally intended to use BCMA but reported low satisfaction with the system. Perceptions explained 72% of the variance in intention to use BCMA and 79% of variance in satisfaction with BCMA. Conclusions To promote their acceptance and use, BCMA and other technologies must be better designed and integrated into the clinical work system. Key steps to achieving better design and integration include measuring clinicians’ acceptance and elucidating perceptions and other factors that shape acceptance. PMID:22417887

Pharmacy workers' perceptions and acceptance of bar-coded medication technology in a pediatric hospital.

PubMed

Holden, Richard J; Brown, Roger L; Scanlon, Matthew C; Karsh, Ben-Tzion

2012-01-01

The safety benefits of bar-coded medication-dispensing and administration (BCMA) technology depend on its intended users favorably perceiving, accepting, and ultimately using the technology. (1) To describe pharmacy workers' perceptions and acceptance of a recently implemented BCMA system and (2) to model the relationship between perceptions and acceptance of BCMA. Pharmacists and pharmacy technicians at a Midwest U.S. pediatric hospital were surveyed following the hospital's implementation of a BCMA system. Twenty-nine pharmacists' and 10 technicians' self-reported perceptions and acceptance of the BCMA system were analyzed, supplemented by qualitative observational and free-response survey data. Perception-acceptance associations were analyzed using structural models. The BCMA system's perceived ease of use was rated low by pharmacists and moderate by pharmacy technicians. Both pharmacists and technicians perceived that the BCMA system was not useful for improving either personal job performance or patient care. Pharmacy workers perceived that individuals important to them encouraged BMCA use. Pharmacy workers generally intended to use BCMA but reported low satisfaction with the system. Perceptions explained 72% of the variance in intention to use BCMA and 79% of variance in satisfaction with BCMA. To promote their acceptance and use, BCMA and other technologies must be better designed and integrated into the clinical work system. Key steps to achieving better design and integration include measuring clinicians' acceptance and elucidating perceptions and other factors that shape acceptance. Copyright © 2012 Elsevier Inc. All rights reserved.

Acceptability of picture archiving and communication system (PACS) among hospital healthcare personnel based on a unified theory of acceptance and use of technology.

PubMed

Ahmadi, Maryam; Mehrabi, Nahid; Sheikhtaheri, Abbas; Sadeghi, Mojtaba

2017-09-01

The picture archiving and communication system (PACS) is a healthcare system technology which manages medical images and integrates equipment through a network. There are some theories about the use and acceptance of technology by people to describe the behavior and attitudes of end users towards information technologies. We investigated the influential factors on users' acceptance of PACS in the military hospitals of Tehran. In this applied analytical and cross-sectional study, 151 healthcare employees of military hospitals who had experience in using the PACS system were investigated. Participants were selected by census. The following variables were considered: performance expectancy, efforts expectancy, social influence, facilitating conditions and behavioral intention. Data were gathered using a questionnaire. Its validity and reliability were approved by a panel of experts and was piloted with 30 hospital healthcare staff (Cronbach's alpha =0.91). Spearman correlation coefficient and multiple linear regression analysis were used in analyzing the data. Expected performance, efforts expectancy, social impact and facilitating conditions had a significant relationship with behavioral intention. The multiple regression analysis indicated that only performance expectancy can predict the user's behavioral intentions to use PACS technology. Performance and effort expectancies are quite influential in accepting the use of PACS in hospitals. All healthcare personnel should become aware that using such technology is necessary in a hospital. Knowing the influencing factors that affect the acceptance of using new technology can help in improving its use, especially in a healthcare system. This can improve the offered healthcare services' quality.

How to measure technology assessment: an introduction.

PubMed

Hasman, Arie

2014-01-01

This contribution introduces the Technology Acceptance model. Since information systems are still underutilized, application of models of user acceptance can provide important clues about what can be done to increase system usage.

Consumer acceptability of cucumber pickles produced by fermentation in calcium chloride brine for reduced environmental impact

USDA-ARS?s Scientific Manuscript database

Fermentation of cucumbers in calcium chloride brine has been proposed as an alternative process to reduce the environmental impact of traditional, high salt fermentations. The objective of this research was to determine whether consumer acceptability of pickle products would be impacted by fermentat...

Future Protein Supply and Demand: Strategies and Factors Influencing a Sustainable Equilibrium

PubMed Central

Henchion, Maeve; Hayes, Maria; Mullen, Anne Maria; Fenelon, Mark; Tiwari, Brijesh

2017-01-01

A growing global population, combined with factors such as changing socio-demographics, will place increased pressure on the world’s resources to provide not only more but also different types of food. Increased demand for animal-based protein in particular is expected to have a negative environmental impact, generating greenhouse gas emissions, requiring more water and more land. Addressing this “perfect storm” will necessitate more sustainable production of existing sources of protein as well as alternative sources for direct human consumption. This paper outlines some potential demand scenarios and provides an overview of selected existing and novel protein sources in terms of their potential to sustainably deliver protein for the future, considering drivers and challenges relating to nutritional, environmental, and technological and market/consumer domains. It concludes that different factors influence the potential of existing and novel sources. Existing protein sources are primarily hindered by their negative environmental impacts with some concerns around health. However, they offer social and economic benefits, and have a high level of consumer acceptance. Furthermore, recent research emphasizes the role of livestock as part of the solution to greenhouse gas emissions, and indicates that animal-based protein has an important role as part of a sustainable diet and as a contributor to food security. Novel proteins require the development of new value chains, and attention to issues such as production costs, food safety, scalability and consumer acceptance. Furthermore, positive environmental impacts cannot be assumed with novel protein sources and care must be taken to ensure that comparisons between novel and existing protein sources are valid. Greater alignment of political forces, and the involvement of wider stakeholders in a governance role, as well as development/commercialization role, is required to address both sources of protein and ensure food security. PMID:28726744

Future Protein Supply and Demand: Strategies and Factors Influencing a Sustainable Equilibrium.

PubMed

Henchion, Maeve; Hayes, Maria; Mullen, Anne Maria; Fenelon, Mark; Tiwari, Brijesh

2017-07-20

A growing global population, combined with factors such as changing socio-demographics, will place increased pressure on the world's resources to provide not only more but also different types of food. Increased demand for animal-based protein in particular is expected to have a negative environmental impact, generating greenhouse gas emissions, requiring more water and more land. Addressing this "perfect storm" will necessitate more sustainable production of existing sources of protein as well as alternative sources for direct human consumption. This paper outlines some potential demand scenarios and provides an overview of selected existing and novel protein sources in terms of their potential to sustainably deliver protein for the future, considering drivers and challenges relating to nutritional, environmental, and technological and market/consumer domains. It concludes that different factors influence the potential of existing and novel sources. Existing protein sources are primarily hindered by their negative environmental impacts with some concerns around health. However, they offer social and economic benefits, and have a high level of consumer acceptance. Furthermore, recent research emphasizes the role of livestock as part of the solution to greenhouse gas emissions, and indicates that animal-based protein has an important role as part of a sustainable diet and as a contributor to food security. Novel proteins require the development of new value chains, and attention to issues such as production costs, food safety, scalability and consumer acceptance. Furthermore, positive environmental impacts cannot be assumed with novel protein sources and care must be taken to ensure that comparisons between novel and existing protein sources are valid. Greater alignment of political forces, and the involvement of wider stakeholders in a governance role, as well as development/commercialization role, is required to address both sources of protein and ensure food security.

Uncertainty in Bioenergy Scenarios for California: Lessons Learned in Communicating with Different Stakeholder Groups

NASA Astrophysics Data System (ADS)

Youngs, H.

2013-12-01

Projecting future bioenergy use involves incorporating several critical inter-related parameters with high uncertainty. Among these are: technology adoption, infrastructure and capacity building, investment, political will, and public acceptance. How, when, where, and to what extent the various bioenergy options are implemented has profound effects on the environmental impacts incurred. California serves as an interesting case study for bioenergy implementation because it has very strong competing forces that can influence these critical factors. The state has aggressive greenhouse gas reduction goals, which will require some biofuels, and has invested accordingly on new technology. At the same time, political will and public acceptance of bioenergy has wavered, seriously stalling bioenergy expansion efforts. We have constructed scenarios for bioenergy implementation in California to 2050, in conjunction with efforts to reach AB32 GHG reduction goals of 80% below 1990 emissions. The state has the potential to produce 3 to 10 TJ of biofuels and electricity; however, this potential will be severely limited in some scenarios. This work examines sources of uncertainty in bioenergy implementation, how uncertainty is or is not incorporated into future bioenergy scenarios, and what this means for assessing environmental impacts. How uncertainty is communicated and perceived also affects future scenarios. Often, there is a disconnect between scenarios for widespread implementation and the actual development of individual projects, resulting in "artificial uncertainty" with very real impacts. Bringing stakeholders to the table is only the first step. Strategies to tailor and stage discussions of uncertainty to stakeholder groups is equally important. Lessons learned in the process of communicating the Calfornia's Energy Future biofuels assessment will be discussed.

The Future of Low-Carbon Transportation Fuels

NASA Astrophysics Data System (ADS)

Yang, Christopher; Yeh, Sonia

2011-11-01

Petroleum fuel uses make up essentially all of transportation fuel usage today and will continue to dominate transportation fuel usage well into future without any major policy changes. This chapter focuses on low-carbon transportation fuels, specifically, biofuels, electricity and hydrogen, that are emerging options to displace petroleum based fuels. The transition to cleaner, lower carbon fuel sources will need significant technology advancement, and sustained coordination efforts among the vehicle and fuel industry and policymakers/regulators over long period of time in order to overcome market barriers, consumer acceptance, and externalities of imported oil. We discuss the unique infrastructure challenges, and compare resource, technology, economics and transitional issues for each of these fuels. While each fuel type has important technical and implementation challenges to overcome (including vehicle technologies) in order to contribute a large fraction of our total fuel demand, it is important to note that a portfolio approach will give us the best chance of meeting stringent environmental and energy security goals for a sustainable transportation future.

National Space Biomedical Research Institute

NASA Technical Reports Server (NTRS)

2005-01-01

NSBRI partners with NASA to develop countermeasures against the deleterious effects of long duration space flight. NSBRI's science and technology projects are directed toward this goal, which is accomplished by: 1. Designing, testing and validating effective countermeasures to address the biological and environmental impediments to long-term human space flight. 2. Defining the molecular, cellular, organ-level, integrated responses and mechanistic relationships that ultimately determine these impediments, where such activity fosters the development of novel countermeasures. 3. Establishing biomedical support technologies to maximize human performance in space, reduce biomedical hazards to an acceptable level and deliver quality medical care. 4. Transferring and disseminating the biomedical advances in knowledge and technology acquired through living and working in space to the general benefit of humankind; including the treatment of patients suffering from gravity- and radiation-related conditions on Earth. and 5. ensuring open involvement of the scientific community,industry and the public in the Institute's activities and fostering a robust collaboration with NASA, particularly through JSC.

Aircraft Operations Classification System

NASA Technical Reports Server (NTRS)

Harlow, Charles; Zhu, Weihong

2001-01-01

Accurate data is important in the aviation planning process. In this project we consider systems for measuring aircraft activity at airports. This would include determining the type of aircraft such as jet, helicopter, single engine, and multiengine propeller. Some of the issues involved in deploying technologies for monitoring aircraft operations are cost, reliability, and accuracy. In addition, the system must be field portable and acceptable at airports. A comparison of technologies was conducted and it was decided that an aircraft monitoring system should be based upon acoustic technology. A multimedia relational database was established for the study. The information contained in the database consists of airport information, runway information, acoustic records, photographic records, a description of the event (takeoff, landing), aircraft type, and environmental information. We extracted features from the time signal and the frequency content of the signal. A multi-layer feed-forward neural network was chosen as the classifier. Training and testing results were obtained. We were able to obtain classification results of over 90 percent for training and testing for takeoff events.

Design and analysis issues of integrated control systems for high-speed civil transports

NASA Technical Reports Server (NTRS)

Mccarty, Craig A.; Feather, John B.; Dykman, John R.; Page, Mark A.; Hodgkinson, John

1992-01-01

A study was conducted to identify, rank, and define development plans for the critical guidance and control design and analysis issues as related to economically viable and environmentally acceptable high-speed civil transport. The issues were identified in a multistep process. First, pertinent literature on supersonic cruise aircraft was reviewed, and experts were consulted to establish the fundamental characteristics and problems inherent to supersonic cruise aircraft. Next, the advanced technologies and strategies being pursued for the high-speed civil transport were considered to determine any additional unique control problems the transport may have. Finally, existing technologies and methods were examined to determine their capabilities for the design and analysis of high-speed civil transport control systems and to identify the shortcomings and issues. Three priority levels - mandatory, highly beneficial, and desirable - were established. Within each of these levels, the issues were further ranked. Technology development plans for each issue were defined. Each plan contains a task breakdown and schedule.

Technology Acceptance Related to Second Life[TM], Social Networking, Twitter[TM], and Content Management Systems: Are Agricultural Students Ready, Willing, and Able?

ERIC Educational Resources Information Center

Murphrey, Theresa Pesl; Rutherford, Tracy A.; Doerfert, David L.; Edgar, Leslie D.; Edgar, Don W.

2012-01-01

Technology has the potential to improve education but only if it is applied with purpose and consideration of the audience. Understanding technology's role in education goes beyond the comparison of tools; there is a need to better understand student acceptance of technology so appropriate educational scaffolding and support can be provided. The…

Examining the Factors Affecting PDA Acceptance among Physicians: An Extended Technology Acceptance Model.

PubMed

Basak, Ecem; Gumussoy, Cigdem Altin; Calisir, Fethi

2015-01-01

This study aims at identifying the factors affecting the intention to use personal digital assistant (PDA) technology among physicians in Turkey using an extended Technology Acceptance Model (TAM). A structural equation-modeling approach was used to identify the variables that significantly affect the intention to use PDA technology. The data were collected from 339 physicians in Turkey. Results indicated that 71% of the physicians' intention to use PDA technology is explained by perceived usefulness and perceived ease of use. On comparing both, the perceived ease of use has the strongest effect, whereas the effect of perceived enjoyment on behavioral intention to use is found to be insignificant. This study concludes with the recommendations for managers and possible future research.

DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

EPA Pesticide Factsheets

A demonstration of field portable/mobile technologies for measuring trace elements in soil and sediments was conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation (SITE) Program. The demonstration took place from January 24 to 28, 2005, at the Kennedy Athletic, Recreational and Social Park at Kennedy Space Center on Merritt Island, Florida. The purpose of the demonstration was to verify the performance of various instruments that employ X-ray fluorescence (XRF) measurement technologies for the determination of 13 toxic elements in a variety of soil and sediment samples. Instruments from the technology developers listed below were demonstrated. o Innov-X Systems, Inc.o NITON LLC (2 instruments ) o Oxford Instruments Portable Division (formerly Metorex, Inc.) .Oxford Instruments Analytical .Rigaku, Inc.o RONTEC USA Inc.o Xcalibur XRF Services Inc. (Division of Elvatech Ltd. ) This demonstration plan describes the procedures that will be used to verify the performance and cost of the XRF instruments provided by these technology developers. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to perform this verification. A separate innovative technology verification report (ITVR) will be prepared for each instrument. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented perfor

A Survey of Pre-Service Teachers' Acceptance of Technology in Thailand

ERIC Educational Resources Information Center

Teo, Timothy; Khlaisang, Jintavee; Thammetar, Thapanee; Ruangrit, Nammon; Satiman, Anirut; Sunphakitjumnong, Kobkul

2014-01-01

In the recent decade, Thailand has launched many initiatives to ensure that technology is integrated into the school curriculum. Despite the investment and efforts of the government, few studies have been conducted to examine users' acceptance of technology. Given that educators are the change agents in many educational initiatives, it is…

Enterprise Social Networking: Technology Acceptance Related to Personality, Age, and Gender

ERIC Educational Resources Information Center

Rochelle, Joseph

2017-01-01

In this dissertation, the researcher examined and added to the body of knowledge within the project change management field of technology implementation. The rationale behind the study was to evaluate technology acceptance of Enterprise Social Networking (ESN), which has been widely implemented across over 90% of the "Fortune" 500…

Examining the Antecedents of Social Networking Sites Use among CEGEP Students

ERIC Educational Resources Information Center

Doleck, Tenzin; Bazelais, Paul; Lemay, David John

2017-01-01

Investigations in technology acceptance in education has largely overlooked certain unique populations like students from the "Collège d'enseignement général et professionnel" (CEGEP) system. In studies examining CEGEP students' use of technology, the Technology Acceptance Model (TAM) perspective has not been taken into account, nor have…

Invariance of an Extended Technology Acceptance Model Across Gender and Age Group

ERIC Educational Resources Information Center

Ahmad, Tunku Badariah Tunku; Madarsha, Kamal Basha; Zainuddin, Ahmad Marzuki; Ismail, Nik Ahmad Hisham; Khairani, Ahmad Zamri; Nordin, Mohamad Sahari

2011-01-01

In this study, we examined the likelihood of a TAME (extended technology acceptance model), in which the interrelationships among computer self-efficacy, perceived usefulness, intention to use and self-reported use of computer-mediated technology were tested. In addition, the gender- and age-invariant of its causal structure were evaluated. The…

Integrating Telemedicine for Disaster Response: Testing the Emergency Telemedicine Technology Acceptance Model

ERIC Educational Resources Information Center

Davis, Theresa M.

2013-01-01

Background: There is little evidence that technology acceptance is well understood in healthcare. The hospital environment is complex and dynamic creating a challenge when new technology is introduced because it impacts current processes and workflows which can significantly affect patient care delivery and outcomes. This study tested the effect…

Assessing Acceptance toward Wiki Technology in the Context of Higher Education

ERIC Educational Resources Information Center

Altanopoulou, Panagiota; Tselios, Nikolaos

2017-01-01

This study investigated undergraduate students' intention to use wiki technology. An extension of the Technology Acceptance Model (TAM) has been used by taking into account not only students' wiki perceived utility and usability, but also Big Five personality characteristics and two other variables, social norms, and facilitating conditions, as…

78 FR 42520 - Control Technology, Inc.; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-16

... Technology, Inc.; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments, Motions To Intervene, and Competing Applications On December 18, 2012, Control Technology, Inc. filed an application for a preliminary permit, pursuant to section 4(f) of the Federal Power Act, proposing to study...

Influence of gender of the teaching staff on students' acceptance of a virtual implant planning course.

PubMed

Nkenke, Emeka; Vairaktaris, Elefterios; Schaller, Hans-Günter; Perisanidis, Christos; Eitner, Stephan

2017-05-01

Acceptance of new technology is influenced by a number of situational and social factors. So far, only limited data are available on the influence of the teaching staff's gender on the acceptance of virtual dental implant planning by students. This study aimed at assessing the influence of the teaching staff's gender on the acceptance of a virtual implant planning course by male and female undergraduate dental students and their general attitude toward implantology. Two groups of third-year dental students (group 1, 9 males, 22 females; group 2, 12 males, 20 females) attended a virtual dental implant planning course. For the first group the teaching staff was all-male, while the teaching staff was all-female for the second group. After completion of the course the students filled in a technology acceptance questionnaire. An all-female teaching staff led to a degree of technology acceptance that did not differ significantly for male and female students. When the teaching staff was all-male, significant differences for technology acceptance occurred between male and female students. However, male as well as female students attributed the practice of implantology to both genders of dentists, equally, without statistically significant difference independent of the gender of the teaching staff. The more evenly distributed degree of technology acceptance of students of both genders being taught by a female staff is a favorable effect which may be explained by the more egalitarian style of women. Therefore, while feminization in dentistry proceeds, adequate measures should be taken to increase the number of female teachers. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Designing a good life: a matrix for the technological mediation of morality.

PubMed

Swierstra, Tsjalling; Waelbers, Katinka

2012-03-01

Technologies fulfill a social role in the sense that they influence the moral actions of people, often in unintended and unforeseen ways. Scientists and engineers are already accepting much responsibility for the technological, economical and environmental aspects of their work. This article asks them to take an extra step, and now also consider the social role of their products. The aim is to enable engineers to take a prospective responsibility for the future social roles of their technologies by providing them with a matrix that helps to explore in advance how emerging technologies might plausibly affect the reasons behind people's (moral) actions. On the horizontal axis of the matrix, we distinguished the three basic types of reasons that play a role in practical judgment: what is the case, what can be done and what should be done. On the vertical axis we distinguished the morally relevant classes of issues: stakeholders, consequences and the good life. To illustrate how this matrix may work in practice, the final section applies the matrix to the case of the Google PowerMeter. © The Author(s) 2010. This article is published with open access at Springerlink.com

Integrated Display and Environmental Awareness System - System Architecture Definition

NASA Technical Reports Server (NTRS)

Doule, Ondrej; Miranda, David; Hochstadt, Jake

2017-01-01

The Integrated Display and Environmental Awareness System (IDEAS) is an interdisciplinary team project focusing on the development of a wearable computer and Head Mounted Display (HMD) based on Commercial-Off-The-Shelf (COTS) components for the specific application and needs of NASA technicians, engineers and astronauts. Wearable computers are on the verge of utilization trials in daily life as well as industrial environments. The first civil and COTS wearable head mounted display systems were introduced just a few years ago and they probed not only technology readiness in terms of performance, endurance, miniaturization, operability and usefulness but also maturity of practice in perspective of a socio-technical context. Although the main technical hurdles such as mass and power were addressed as improvements on the technical side, the usefulness, practicality and social acceptance were often noted on the side of a broad variety of humans' operations. In other words, although the technology made a giant leap, its use and efficiency still looks for the sweet spot. The first IDEAS project started in January 2015 and was concluded in January 2017. The project identified current COTS systems' capability at minimum cost and maximum applicability and brought about important strategic concepts that will serve further IDEAS-like system development.

Analysis on effects of energy efficiency regulations & standards for industrial boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Zhao, Yuejin; Liu, Meng

2017-11-01

The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers. Support by Project 2015424050 of Special Fund for quality control Research in the Public Interest

A review of the technological solutions for the treatment of oily sludges from petroleum refineries.

PubMed

da Silva, Leonardo Jordão; Alves, Flávia Chaves; de França, Francisca Pessôa

2012-10-01

The activities of the oil industry have several impacts on the environment due to the large amounts of oily wastes that are generated. The oily sludges are a semi-solid material composed by a mixture of clay, silica and iron oxides contaminated with oil, produced water and the chemicals used in the production of oil. Nowadays both the treatment and management of these waste materials is essential to promote sustainable management of exploration and exploitation of natural resources. Biological, physical and chemical processes can be used to reduce environmental contamination by petroleum hydrocarbons to acceptable levels. The choice of treatment method depends on the physical and chemical properties of the waste as well as the availability of facilities to process these wastes. Literature provides some operations for treatment of oily sludges, such as landfilling, incineration, co-processing in clinkerization furnaces, microwave liquefaction, centrifugation, destructive distillation, thermal plasma, low-temperature conversion, incorporation in ceramic materials, development of impermeable materials, encapsulation and biodegradation in land farming, biopiles and bioreactors. The management of the technology to be applied for the treatment of oily wastes is essential to promote proper environmental management, and provide alternative methods to reduce, reuse and recycle the wastes.

A feasibility assessment for the application of biogas and wind power in the farm environment as sustainable sources of energy

NASA Astrophysics Data System (ADS)

Carbo, Laura C.

The depletion of energy sources and the ever-increasing energy demand---and consequently price escalation---is a problem that concerns the global population. Despite the concept of energy crisis being widely accepted nowadays, there is a lot of scepticism and misinformation on the possible alternatives to alleviate the environmental and economic impacts of conventional energy generation. Renewable energy technologies are constantly experiencing significant innovation and improvements. This thesis sought to assess the potential of small dairy farms to make an energy shift and identify the practical benefits and possible downfalls of this shift. Wind power and biogas digestion were analysed in this thesis, and a model to assess these technologies at any given farm was developed on VBA. For the case studied in this research both technologies were concluded to be feasible from an economic point of view. Although the initial investment can seem costly, considering the relatively low payback period and the currently available subsidies the economic implications are not an obstacle. The model developed on VBA is applicable to any region, given the right data is put into the programme. Considering the global energy concern, models such as the one developed in this thesis are an appropriate tool to identify potential shifts to greener solutions and prove to users that it can be economically profitable for them as well as environmentally beneficial.

Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

PubMed

Wang, Xiaohui; Goh, Dion Hoe-Lian

2017-11-01

The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

Acceptability of picture archiving and communication system (PACS) among hospital healthcare personnel based on a unified theory of acceptance and use of technology

PubMed Central

Ahmadi, Maryam; Mehrabi, Nahid; Sheikhtaheri, Abbas; Sadeghi, Mojtaba

2017-01-01

Background and aim The picture archiving and communication system (PACS) is a healthcare system technology which manages medical images and integrates equipment through a network. There are some theories about the use and acceptance of technology by people to describe the behavior and attitudes of end users towards information technologies. We investigated the influential factors on users’ acceptance of PACS in the military hospitals of Tehran. Methods In this applied analytical and cross-sectional study, 151 healthcare employees of military hospitals who had experience in using the PACS system were investigated. Participants were selected by census. The following variables were considered: performance expectancy, efforts expectancy, social influence, facilitating conditions and behavioral intention. Data were gathered using a questionnaire. Its validity and reliability were approved by a panel of experts and was piloted with 30 hospital healthcare staff (Cronbach’s alpha =0.91). Spearman correlation coefficient and multiple linear regression analysis were used in analyzing the data. Results Expected performance, efforts expectancy, social impact and facilitating conditions had a significant relationship with behavioral intention. The multiple regression analysis indicated that only performance expectancy can predict the user’s behavioral intentions to use PACS technology. Conclusion Performance and effort expectancies are quite influential in accepting the use of PACS in hospitals. All healthcare personnel should become aware that using such technology is necessary in a hospital. Knowing the influencing factors that affect the acceptance of using new technology can help in improving its use, especially in a healthcare system. This can improve the offered healthcare services’ quality. PMID:29038717

Public Acceptance of Nuclear Energy in Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramirez-Sanchez, Jose R.; Alonso, Gustavo; Palacios, H. Javier

2006-07-01

The nuclear energy is attracting renewed interest of public and policy makers due to his potential role in long term strategies aiming to reduce the risk of global warming and in a more general, to carry out sustainable policies, however, any project of nuclear nature arise concerns about the risks associated with the release of radioactivity during accident conditions, radioactive waste disposal and nuclear weapons proliferation. Then in light of the likeliness for a new nuclear project in Mexico, is necessary to design a strategy to improve the social acceptance of nuclear power. This concern is been boarding since themore » environmental and economic point of view. The information that can change the perception of nuclear energy towards increase public acceptance, should be an honest debate about the benefits of nuclear energy, of course there are questions and they have to be answered, but in a realistic and scientific way: So thinking in Mexico as a first step it is important to communicate to the government entities and political parties that nuclear energy is a proven asset that it is emission free and safe. Of course besides the guarantee of a proven technology, clean and safe relies the economic fact, and in Mexico this could be the most important aspect to communicate to key people in government. Based in the Laguna Verde survey it is clear that we have to find the adequate means to distribute the real information concerning nuclear technology to the public, because the results shows that Mexican people does not have complete information about nuclear energy, but public can support it when they have enough information. From the IAEA study we can say that in Mexico public acceptance of nuclear energy it s not so bad, is the highest percentage of acceptance of nuclear technology for health, considering benefits to the environment Mexican opposition to build new plants is the second less percentage, and generally speaking 60% of the people accept somehow nuclear energy. Also we can say that in Mexico there are few nuclear information centers one is located at Laguna Verde power plant, and there is other one at Instituto Nacional de Investigaciones Nucleares (ININ). So if we want to improve public acceptance in Mexico we should design a well defined strategy to communicate nuclear issues to the public. This strategy should point out many aspects of nuclear power as discussed before. In addition, recent economic studies performed at ININ, indicate that, nuclear energy is currently is price competitive with other sources based on fossil fuels. This facts are currently under discussion with government entities, and now acceptance of government entities is increasing. Even there was a public announce of Mexican government in the sense that Mexico is considering the nuclear option as a part of its energy strategy for the near future. (authors)« less

If we offer it, will they accept? Factors affecting patient use intentions of personal health records and secure messaging.

PubMed

Agarwal, Ritu; Anderson, Catherine; Zarate, Jesus; Ward, Claudine

2013-02-26

Personal health records (PHRs) are an important tool for empowering patients and stimulating health action. To date, the volitional adoption of publicly available PHRs by consumers has been low. This may be partly due to patient concerns about issues such as data security, accuracy of the clinical information stored in the PHR, and challenges with keeping the information updated. One potential solution to mitigate concerns about security, accuracy, and updating of information that may accelerate technology adoption is the provision of PHRs by employers where the PHR is pre-populated with patients' health data. Increasingly, employers and payers are offering this technology to employees as a mechanism for greater patient engagement in health and well-being. Little is known about the antecedents of PHR acceptance in the context of an employer sponsored PHR system. Using social cognitive theory as a lens, we theorized and empirically tested how individual factors (patient activation and provider satisfaction) and two environment factors (technology and organization) influence patient intentions to use a PHR among early adopters of the technology. In technology factors, we studied tool empowerment potential and value of tool functionality. In organization factors, we focused on communication tactics deployed by the organization during PHR rollout. We conducted cross-sectional analysis of field data collected during the first 3 months post go-live of the deployment of a PHR with secure messaging implemented by the Air Force Medical Service at Elmendorf Air Force Base in Alaska in December 2010. A questionnaire with validated measures was designed and completed by 283 participants. The research model was estimated using moderated multiple regression. Provider satisfaction, interactions between environmental factors (communication tactics and value of the tool functionality), and interactions between patient activation and tool empowerment potential were significantly (P<.05) associated with behavioral intentions to use the PHR tool. The independent variables collectively explained 42% of the variance in behavioral intentions. The study demonstrated that individual and environmental factors influence intentions to use the PHR. Patients who were more satisfied with their provider had higher use intentions. For patients who perceived the health care process management support features of the tool to be of significant value, communication tactics served to increase their use intentions. Finally, patients who believed the tool to be empowering demonstrated higher intentions to use, which were further enhanced for highly activated patients. The findings highlight the importance of communication tactics and technology characteristics and have implications for the management of PHR implementations.

A theoretical model to explain the smart technology adoption behaviors of elder consumers (Elderadopt).

PubMed

Golant, Stephen M

2017-08-01

A growing global population of older adults is potential consumers of a category of products referred to as smart technologies, but also known as telehealth, telecare, information and communication technologies, robotics, and gerontechnology. This paper constructs a theoretical model to explain whether older people will adopt smart technology options to cope with their discrepant individual or environmental circumstances, thereby enabling them to age in place. Its proposed constructs and relationships are drawn from multiple academic disciplines and professional specialties, and an extensive literature focused on the factors influencing the acceptance of these smart technologies. It specifically examines whether older adults will substitute these new technologies for traditional coping solutions that rely on informal and formal care assistance and low technology related products. The model argues that older people will more positively evaluate smart technology alternatives when they feel more stressed because of their unmet needs, have greater resilience (stronger perceptions of self-efficacy and greater openness to new information), and are more strongly persuaded by their sources of outside messaging (external information) and their past experiences (internal information). It proposes that older people distinguish three attributes of these coping options when they appraise them: perceived efficaciousness, perceived usability, and perceived collateral damages. The more positively older people evaluate these attributes, the more likely that they will adopt these smart technology products. Copyright © 2017 Elsevier Inc. All rights reserved.

Smart Money

ERIC Educational Resources Information Center

Ullman, Ellen

2009-01-01

From using virtualization technology to accepting lunch payments online, school districts are seeking money-saving methods. In this article, the author discusses some methods used by school districts that allow them to save money from using virtualization technology to accepting lunch payments online.

Enraf Series 854 advanced technology gauge (ATG) acceptance test procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huber, J.H.

1996-09-11

This Acceptance Test Procedure was written to test the Enraf Series 854 Advanced Technology Gauge (ATG) prior to installation in the Tank Farms. The procedure sets various parameters and verifies that the gauge is functional.

A cross-cultural study of perceived benefit versus risk as mediators in the trust-acceptance relationship.

PubMed

Bronfman, Nicolás C; Vázquez, Esperanza López

2011-12-01

Several recent studies have identified the significant role social trust in regulatory organizations plays in the public acceptance of various technologies and activities. In a cross-cultural investigation, the current work explores empirically the relationship between social trust in management authorities and the degree of public acceptability of hazards for individuals residing in either developed or emerging Latin American economies using confirmatory rather than exploratory techniques. Undergraduates in Mexico, Brazil, and Chile and the United States and Spain assessed trust in regulatory authorities, public acceptance, personal knowledge, and the risks and benefits for 23 activities and technological hazards. Four findings were encountered. (i) In Latin American nations trust in regulatory entities was strongly and significantly (directly as well as indirectly) linked with the public's acceptance of any activity or technology. In developed countries trust and acceptability are essentially linked indirectly (through perceived risk and perceived benefit). (ii) Lack of knowledge strengthened the magnitude and statistical significance of the trust-acceptability relationship in both developed and developing countries. (iii) For high levels of claimed knowledge, the impact on the trust-acceptability relationship varied depending upon the origin of the sample. (iv) Confirmatory analysis revealed the relative importance of perceived benefit over perceived risk in meditating the trust-acceptability causal chain. © 2011 Society for Risk Analysis.

Examining the Influence of Subjective Norm and Facilitating Conditions on the Intention to Use Technology among Pre-Service Teachers: A Structural Equation Modeling of an Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Teo, Timothy

2010-01-01

This study examined pre-service teachers' self-reported behavioral intentions to use technology. Three hundred and fourteen participants completed a survey questionnaire measuring their responses to six constructs from a research model that extends the technology acceptance model (TAM) by including facilitating conditions and subjective norm.…

Assessing the Intention to Use Technology among Pre-Service Teachers in Singapore and Malaysia: A Multigroup Invariance Analysis of the Technology Acceptance Model (TAM)

ERIC Educational Resources Information Center

Teo, Timothy; Lee, Chwee Beng; Chai, Ching Sing; Wong, Su Luan

2009-01-01

This study assesses the pre-service teachers' self-reported future intentions to use technology in Singapore and Malaysia. A survey was employed to validate items from past research. Using the Technology Acceptance Model (TAM) as a research framework, 495 pre-service teachers from Singapore and Malaysia responded to an 11-item questionnaires…

Evaluation of Flight Deck-Based Interval Management Crew Procedure Feasibility

NASA Technical Reports Server (NTRS)

Wilson, Sara R.; Murdoch, Jennifer L.; Hubbs, Clay E.; Swieringa, Kurt A.

2013-01-01

Air traffic demand is predicted to increase over the next 20 years, creating a need for new technologies and procedures to support this growth in a safe and efficient manner. The National Aeronautics and Space Administration's (NASA) Air Traffic Management Technology Demonstration - 1 (ATD-1) will operationally demonstrate the feasibility of efficient arrival operations combining ground-based and airborne NASA technologies. The integration of these technologies will increase throughput, reduce delay, conserve fuel, and minimize environmental impacts. The ground-based tools include Traffic Management Advisor with Terminal Metering for precise time-based scheduling and Controller Managed Spacing decision support tools for better managing aircraft delay with speed control. The core airborne technology in ATD-1 is Flight deck-based Interval Management (FIM). FIM tools provide pilots with speed commands calculated using information from Automatic Dependent Surveillance - Broadcast. The precise merging and spacing enabled by FIM avionics and flight crew procedures will reduce excess spacing buffers and result in higher terminal throughput. This paper describes a human-in-the-loop experiment designed to assess the acceptability and feasibility of the ATD-1 procedures used in a voice communications environment. This experiment utilized the ATD-1 integrated system of ground-based and airborne technologies. Pilot participants flew a high-fidelity fixed base simulator equipped with an airborne spacing algorithm and a FIM crew interface. Experiment scenarios involved multiple air traffic flows into the Dallas-Fort Worth Terminal Radar Control airspace. Results indicate that the proposed procedures were feasible for use by flight crews in a voice communications environment. The delivery accuracy at the achieve-by point was within +/- five seconds and the delivery precision was less than five seconds. Furthermore, FIM speed commands occurred at a rate of less than one per minute, and pilots found the frequency of the speed commands to be acceptable at all times throughout the experiment scenarios.

Technology Adoption: an Interaction Perspective

NASA Astrophysics Data System (ADS)

Sitorus, Hotna M.; Govindaraju, Rajesri; Wiratmadja, I. I.; Sudirman, Iman

2016-02-01

The success of a new technology depends on how well it is accepted by its intended users. Many technologies face the problem of low adoption rate, despite the benefits. An understanding of what makes people accept or reject a new technology can help speed up the adoption rate. This paper presents a framework for technology adoption based on an interactive perspective, resulting from a literature study on technology adoption. In studying technology adoption, it is necessary to consider the interactions among elements involved in the system, for these interactions may generate new characteristics or new relationships. The interactions among elements in a system adoption have not received sufficient consideration in previous studies of technology adoption. Based on the proposed interaction perspective, technology adoption is elaborated by examining interactions among the individual (i.e. the user or prospective user), the technology, the task and the environment. The framework is formulated by adopting several theories, including Perceived Characteristics of Innovating, Diffusion of Innovation Theory, Technology Acceptance Model, Task-Technology Fit and usability theory. The proposed framework is illustrated in the context of mobile banking adoption. It is aimed to offer a better understanding of determinants of technology adoption in various contexts, including technology in manufacturing systems.

EPA scientific integrity policy draft

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-08-01

The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

A Cross-Cultural Examination of the Impact of Social, Organisational and Individual Factors on Educational Technology Acceptance between British and Lebanese University Students

ERIC Educational Resources Information Center

Tarhini, Ali; Hone, Kate; Liu, Xiaohui

2015-01-01

This paper examines the social, organisational and individual factors that may affect students' acceptance of e-learning systems in higher education in a cross-cultural context. A questionnaire was developed based on an extended technology acceptance model (TAM). A total sample of 1173 university students from two private universities in Lebanon…

Model of Information and Communication Technology (ICT) Acceptance and Use for Teaching Staff in Sub-Saharan Africa Public Higher Education Institutions

ERIC Educational Resources Information Center

Ouedraogo, Boukary

2017-01-01

This article uses data survey on 82 teachers from the University of Ouagadougou and the model of unified theory of acceptance and use of technology (UTAUT) to assess the determinants of acceptance and educational use of ICT by teachers. The paper's outcomes show that the construct "performance expectancy" of ICT (expected utility and…

Sustainable exposure prevention through innovative detection and remediation technologies from the NIEHS Superfund Research Program.

PubMed

Henry, Heather F; Suk, William A

2017-03-01

Innovative devices and tools for exposure assessment and remediation play an integral role in preventing exposure to hazardous substances. New solutions for detecting and remediating organic, inorganic, and mixtures of contaminants can improve public health as a means of primary prevention. Using a public health prevention model, detection and remediation technologies contribute to primary prevention as tools to identify areas of high risk (e.g. contamination hotspots), to recognize hazards (bioassay tests), and to prevent exposure through contaminant cleanups. Primary prevention success is ultimately governed by the widespread acceptance of the prevention tool. And, in like fashion, detection and remediation technologies must convey technical and sustainability advantages to be adopted for use. Hence, sustainability - economic, environmental, and societal - drives innovation in detection and remediation technology. The National Institute of Health (NIH) National Institute of Environmental Health Sciences (NIEHS) Superfund Research Program (SRP) is mandated to advance innovative detection, remediation, and toxicity screening technology development through grants to universities and small businesses. SRP recognizes the importance of fast, accurate, robust, and advanced detection technologies that allow for portable real-time, on-site characterization, monitoring, and assessment of contaminant concentration and/or toxicity. Advances in non-targeted screening, biological-based assays, passive sampling devices (PSDs), sophisticated modeling approaches, and precision-based analytical tools are making it easier to quickly identify hazardous "hotspots" and, therefore, prevent exposures. Innovation in sustainable remediation uses a variety of approaches: in situ remediation; harnessing the natural catalytic properties of biological processes (such as bioremediation and phytotechnologies); and application of novel materials science (such as nanotechnology, advanced membranes, new carbon materials, and materials reuse). Collectively, the investment in new technologies shows promise to reduce the amount and toxicity of hazardous substances in the environment. This manuscript highlights SRP funded innovative devices and tools for exposure assessment and remediation of organic, inorganic, and mixtures of contaminants with a particular focus on sustainable technologies.

Can Coolness Predict Technology Adoption? Effects of Perceived Coolness on User Acceptance of Smartphones with Curved Screens.

PubMed

Kim, Ki Joon; Shin, Dong-Hee; Park, Eunil

2015-09-01

This study proposes an acceptance model for curved-screen smartphones, and explores how the sense of coolness induced by attractiveness, originality, subcultural appeal, and the utility of the curved screen promotes smartphone adoption. The results of structural equation modeling analyses (N = 246) show that these components of coolness (except utility) increase the acceptance of the technology by enhancing the smartphones' affectively driven qualities rather than their utilitarian ones. The proposed coolness model is then compared with the original technology acceptance model to validate that the coolness factors are indeed equally effective determinants of usage intention, as are the extensively studied usability factors such as perceived ease of use and usefulness.

Acceptability of robotic technology in neuro-rehabilitation: preliminary results on chronic stroke patients.

PubMed

Mazzoleni, Stefano; Turchetti, Giuseppe; Palla, Ilaria; Posteraro, Federico; Dario, Paolo

2014-09-01

During the last decade, different robotic devices have been developed for motor rehabilitation of stroke survivors. These devices have been shown to improve motor impairment and contribute to the understanding of mechanisms underlying motor recovery after a stroke. The assessment of the robotic technology for rehabilitation assumes great importance. The aim of this study is to present preliminary results on the assessment of the acceptability of the robotic technology for rehabilitation on a group of thirty-four chronic stroke patients. The results from questionnaires on the patients' acceptability of two different robot-assisted rehabilitation scenarios show that the robotic approach was well accepted and tolerated by the patients. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Factors of Online Learning Adoption: A Comparative Juxtaposition of the Theory of Planned Behaviour and the Technology Acceptance Model

ERIC Educational Resources Information Center

Ndubisi, Nelson

2006-01-01

Organisational investments in information technologies have increased significantly in the past few decades. All around the globe and in Malaysia particularly, a number of educational institutions are experimenting with e-learning. Adopting the theory of planned behaviour (TPB) and the technology acceptance model (TAM) this article tries to…

Does Teaching Geometry with Augmented Reality Affect the Technology Acceptance of Elementary School Mathematics Teacher Candidates?

ERIC Educational Resources Information Center

Önal, Nezih; Ibili, Emin; Çaliskan, Erkan

2017-01-01

The purpose of this research is to determine the impact of augmented reality technology and geometry teaching on elementary school mathematics teacher candidates' technology acceptance and to examine participants' views on augmented reality. The sample of the research was composed of 40 elementary school mathematics teacher candidates who were…

A Correlational Study of the Technology Acceptance Model and Georgia Behavioral Healthcare Provider Telemedicine Adoption

ERIC Educational Resources Information Center

Yallah, Ali

2014-01-01

The implementation of Telemedicine in behavioral health centers can be expensive if proactive steps were not taken to minimize user perceptions towards the new technology. Despite the significant capital investments on new Telemedicine, no consensus identified and explained what factors determined the acceptance, or rejection, of the technology.…

The Effects of Education Compatibility and Technological Expectancy on E-Learning Acceptance

ERIC Educational Resources Information Center

Chen, Jian-Liang

2011-01-01

Discerning what influences a student's acceptance of e-learning is still unclear and has not been well investigated. On the basis of the expectancy-value theory, much effort has been put into identifying the effectual factors regarding the technological expectancy of students. However, aside from technological usage, the adoption of an e-learning…

The Influence of Demographic Factor on Personal Innovativeness towards Technology Acceptance

ERIC Educational Resources Information Center

Noh, Noraini Mohamed; Hamzah, Mahizer; Abdullah, Norazilawati

2016-01-01

Library and Media Teacher (LMT) readiness of accepting and using technology innovation earlier than their colleagues could expedite the technology innovation process into the school education system. The aim of this paper is to report on a study that explored the impact of experience in using computer and the level of ICT knowledge towards…

Teachers Left Behind: Acceptance and Use of Technology in Lebanese Public High Schools

ERIC Educational Resources Information Center

Baytiyeh, Hoda

2014-01-01

Nowadays, the use of computers in education is increasing worldwide. Information technology is deemed essential for the digital generation's classrooms. However, the adoption of technology in teaching and learning largely depends on the culture and social context. The aim of this research study is to evaluate the acceptance and use of technology…

Nurses' perceptions, acceptance, and use of a novel in-room pediatric ICU technology: testing an expanded technology acceptance model.

PubMed

Holden, Richard J; Asan, Onur; Wozniak, Erica M; Flynn, Kathryn E; Scanlon, Matthew C

2016-11-15

The value of health information technology (IT) ultimately depends on end users accepting and appropriately using it for patient care. This study examined pediatric intensive care unit nurses' perceptions, acceptance, and use of a novel health IT, the Large Customizable Interactive Monitor. An expanded technology acceptance model was tested by applying stepwise linear regression to data from a standardized survey of 167 nurses. Nurses reported low-moderate ratings of the novel IT's ease of use and low to very low ratings of usefulness, social influence, and training. Perceived ease of use, usefulness for patient/family involvement, and usefulness for care delivery were associated with system satisfaction (R 2  = 70%). Perceived usefulness for care delivery and patient/family social influence were associated with intention to use the system (R 2  = 65%). Satisfaction and intention were associated with actual system use (R 2  = 51%). The findings have implications for research, design, implementation, and policies for nursing informatics, particularly novel nursing IT. Several changes are recommended to improve the design and implementation of the studied IT.

A Study on Students Acquisition of IT Knowledge and Its Implication on M-Learning.

PubMed

Balavivekanandhan, A; Arulchelvan, S

2015-01-01

The boom in mobile technology has seen a dramatic rise in its usage. This has led to usage of mobiles even in the academic context for further learning. Although the advantages of m-learning (mobile learning) are visible, studies are required to address the aspects that shape its virtual expectations. The acceptance of mobile technology relies mostly on how the students feel about mobile technology fitting into their requirements. Yet, in spite of the significance in the potential of m-learning, research studies have only inadequate data to identify the factors that influence their decision to adapt the mobile technology for the purpose of learning. To deal with this space, the present study was undertaken to correlate the IT skills of students with their impact on their acceptance of m-learning. The research study found that the perceived usability along with the usefulness of m-learning impacts the association between IT expertise and the objective of learners' acceptance of m-learning. A survey of 892 students from Engineering, Arts, and Science Colleges found that IT skills influence student's acquisition of m-learning technology. Specialized and advanced skills in mobile technology along with basic skills play a significant role in influencing a student to accept m-learning. But no specific substantiation has been established to support the statement that highly developed IT skills have influenced the students to accept m-learning.

A Study on Students Acquisition of IT Knowledge and Its Implication on M-Learning

PubMed Central

Balavivekanandhan, A.; Arulchelvan, S.

2015-01-01

The boom in mobile technology has seen a dramatic rise in its usage. This has led to usage of mobiles even in the academic context for further learning. Although the advantages of m-learning (mobile learning) are visible, studies are required to address the aspects that shape its virtual expectations. The acceptance of mobile technology relies mostly on how the students feel about mobile technology fitting into their requirements. Yet, in spite of the significance in the potential of m-learning, research studies have only inadequate data to identify the factors that influence their decision to adapt the mobile technology for the purpose of learning. To deal with this space, the present study was undertaken to correlate the IT skills of students with their impact on their acceptance of m-learning. The research study found that the perceived usability along with the usefulness of m-learning impacts the association between IT expertise and the objective of learners' acceptance of m-learning. A survey of 892 students from Engineering, Arts, and Science Colleges found that IT skills influence student's acquisition of m-learning technology. Specialized and advanced skills in mobile technology along with basic skills play a significant role in influencing a student to accept m-learning. But no specific substantiation has been established to support the statement that highly developed IT skills have influenced the students to accept m-learning. PMID:26576451

77 FR 21551 - New York City Department of Environmental Protection; Notice of Application Accepted for filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13287-004] New York City Department of Environmental Protection; Notice of Application Accepted for filing And Soliciting Motions To Intervene and Protests Take notice that the following hydroelectric application has been filed with the Commission and is available for public...

Deep anisotropic ICP plasma etching designed for high-volume MEMS manufacturing

NASA Astrophysics Data System (ADS)

Yu, Keven; Feldbaum, Michael; Pandhumsoporn, Tam; Gadgil, Prashant

1999-08-01

ICP plasma etching is gaining widespread acceptance as an enabling micromachining technology for advanced MEMS fabrication. Whereas this technology has shown a capability of delivering multiple novel applications for R and D, its acceptance by industry for high volume production has been limited. This acceptance into production will only occur when the plasma etching equipment with this technology offers the device performance, throughput, reliability, and uptime criteria required by a production facility. The design of the plasma etcher using this technology and the process capability it consequently delivers, has significant implications in making this a reality. Alcatel has been supplying such a technology to this MEMS industry for over 5 years and in the interim has evolved its product and process to make this technology production worthy. Alcatel's next generation etcher, the Alcatel 601E, offers multiple advantages to MEMS manufacturers in realizing their production goals.

Effects of Aging and Domain Knowledge on Usability in Small Screen Devices for Diabetes Patients

NASA Astrophysics Data System (ADS)

Calero Valdez, André; Ziefle, Martina; Horstmann, Andreas; Herding, Daniel; Schroeder, Ulrik

Technology acceptance has become a key concept for the successful rollout of technical devices. Though the concept is intensively studied for nearly 20 years now, still, many open questions remain. This especially applies to technology acceptance of older users, which are known to be very sensitive to suboptimal interfaces and show considerable reservations towards the usage of new technology. Mobile small screen technology increasingly penetrates health care and medical applications. This study investigates impacts of aging, technology expertise and domain knowledge on user interaction using the example of diabetes. For this purpose user effectiveness and efficiency have been measured on a simulated small screen device and related to user characteristics, showing that age and technology expertise have a big impact on usability of the device. Furthermore, impacts of user characteristics and success during the trial on acceptance of the device were surveyed and analyzed.

Geostatistical applications in environmental remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, R.N.; Purucker, S.T.; Lyon, B.F.

1995-02-01

Geostatistical analysis refers to a collection of statistical methods for addressing data that vary in space. By incorporating spatial information into the analysis, geostatistics has advantages over traditional statistical analysis for problems with a spatial context. Geostatistics has a history of success in earth science applications, and its popularity is increasing in other areas, including environmental remediation. Due to recent advances in computer technology, geostatistical algorithms can be executed at a speed comparable to many standard statistical software packages. When used responsibly, geostatistics is a systematic and defensible tool can be used in various decision frameworks, such as the Datamore » Quality Objectives (DQO) process. At every point in the site, geostatistics can estimate both the concentration level and the probability or risk of exceeding a given value. Using these probability maps can assist in identifying clean-up zones. Given any decision threshold and an acceptable level of risk, the probability maps identify those areas that are estimated to be above or below the acceptable risk. Those areas that are above the threshold are of the most concern with regard to remediation. In addition to estimating clean-up zones, geostatistics can assist in designing cost-effective secondary sampling schemes. Those areas of the probability map with high levels of estimated uncertainty are areas where more secondary sampling should occur. In addition, geostatistics has the ability to incorporate soft data directly into the analysis. These data include historical records, a highly correlated secondary contaminant, or expert judgment. The role of geostatistics in environmental remediation is a tool that in conjunction with other methods can provide a common forum for building consensus.« less

Technology development of fabrication techniques for advanced solar dynamic concentrators

NASA Technical Reports Server (NTRS)

Richter, Scott W.

1991-01-01

The objective of the advanced concentrator program is to develop the technology that will lead to lightweight, highly reflective, accurate, scaleable, and long lived space solar dynamic concentrators. The advanced concentrator program encompasses new and innovative concepts, fabrication techniques, materials selection, and simulated space environmental testing. Fabrication techniques include methods of fabricating the substrates and coating substrate surfaces to produce high quality optical surfaces, acceptable for further coating with vapor deposited optical films. The selected materials to obtain a high quality optical surface include microsheet glass and Eccocoat EP-3 epoxy, with DC-93-500 selected as a candidate silicone adhesive and levelizing layer. The following procedures are defined: cutting, cleaning, forming, and bonding microsheet glass. Procedures are also defined for surface cleaning, and EP-3 epoxy application. The results and analyses from atomic oxygen and thermal cycling tests are used to determine the effects of orbital conditions in a space environment.

Meeting the challenge of policy-relevant science: lessons from a water resource project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamb, B.L.

Water resources scientists face complex tasks in evaluating aspects of water projects, but relatively few assessment procedures have been applied and accepted as standards applications. Decision-makers often rely on environmental assessments to evaluate the value and operation of projects. There is often confusion about scientists' role in policy decisions. The scientist can affect policy-making as an expert witness, an advocate or a surrogate. By understanding the policy process, scientists can make their work more policy relevant. Using the Terror Lake hydro project in Alaska as a guide, three lessons are discussed: (1) not all problems are able to be solvedmore » with technology; (2) policy-relevant technology is rarely imposed on a problem; and (3) the scientist need not just to react to the policy process, but can have an impact on how that process unfolds.« less

Environmental release of living modified organisms: current approaches and case studies.

PubMed

Thomas, E; Nickson, Ph D

2005-01-01

Agricultural biotechnology is being rapidly adopted as evidenced by the acreage of genetically modified (GM) crops planted and tonnes of product (grain and fiber) harvested. Concurrent with this technological progress, is a growing concern that the worlds biological diversity is coming under increasing threat from human activities. As such, ecological risk assessment approaches are being developed for GM crop plants as international agreements regulating the transboundary movements of these products are being implemented. This paper reviews the ecological risk assessment approach that has been used to date to approve GM crops to date. The process has been case-by-case, using a comparative, science-based approach balancing the potential risks and benefits of the new technology versus those present with the currently accepted practices. The approach used to evaluate and approve these products is consistent with the conditions and requirements outlined in the Cartagena Protocol.

A review on green trend for oil extraction using subcritical water technology and biodiesel production.

PubMed

Abdelmoez, Weal; Ashour, Eman; Naguib, Shahenaz M

2015-01-01

It became a global agenda to develop clean alternative fuels which were domestically available, environmentally acceptable and technically feasible. Thus, biodiesel was destined to make a substantial contribution to the future energy demands of the domestic and industrial economies. Utilization of the non edible vegetable oils as raw materials for biodiesel production had been handled frequently for the past few years. The oil content of these seeds could be extracted by different oil extraction methods, such as mechanical extraction, solvent extraction and by subcritical water extraction technology SWT. Among them, SWT represents a new promising green extraction method. Therefore this review covered the current used non edible oil seeds for biodiesel production as well as giving a sharp focus on the efficiency of using the SWT as a promising extraction method. In addition the advantages and the disadvantages of the different biodiesel production techniques would be covered.

Solar power satellites - Technical, social and political implications

NASA Astrophysics Data System (ADS)

Knelman, F. H.

Solar power satellite systems (SPS) are examined, together with their environmental and social impacts and the energy policies necessary for their construction. The energy source, the sun, is acceptable to advocates of decentralized technologies, while the conversion system is fitted to large institutions. However, large-scale power plants are subject to persistent malfunctions, and the approximately 50 sq km SPS solar array is projected to suffer from at least recurring cell contact failures. The power could also be generated by heat engines for transmission by either laser or microwaves. Numerous feasibility and cost-benefit studies are still required, including defining the transmission beam's effects on the atmosphere, ionosphere, and human health. Furthermore, the resource allocations, capital costs, insurance, and institutional problems still need clarification, as do the design, logistics, and development of an entire new, much larger launch system based on Shuttle technology. Finally, the military defensibility of the SPS power station is questioned.

Ceramics engineering today and tomorrow: Impact on energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korwin, M.L.

1997-12-01

Ceramic engineering has had a profound impact on the development and use of energy. Perhaps nothing has influenced the growth of human society as much as the presence of energy technology. Today, ceramics are incorporated at all levels of the energy discipline, including dams, electric insulators, capacitors, refractories and fiberglass for home insulation. Tomorrow, leaders are going to expect new ways of harnessing, using and conserving clean and abundant energy. Superconductors and nuclear containment vessels are two developing areas of new ceramic applications. With new environmental regulations, the time of passing-on accepted methods of fabrication will come to an end.more » Ceramic engineers of the future will need to better understand the mechanisms of how materials behave. Through continuous research and joint efforts between different ceramic fields, the future of energy and power, and the technology that it will bring, looks most promising.« less

Environmental Communications Today: An Educator's Perspective.

ERIC Educational Resources Information Center

Schoenfeld, Clay

1979-01-01

The article traces the origins of environmental communications and focuses on several categories of environmental communication. It specifies the common denominators of the various forms of environmental communications. An appendix of journals that accept freelance environmental articles is included. (RE)

Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. T. Brown; G. Matthern; A. Glenn

The Metals and Radionuclides Product Line of the US Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted andmore » is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies.« less

Discrimination Report: ESTCP UXO Discrimination Study, ESTCPProject #MM-0437

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gasperikova, Erika; Smith, J. Torquil; Morrison, H. Frank

2007-12-21

The FY06 Defense Appropriation contains funding for the 'Development of Advanced, Sophisticated, Discrimination Technologies for UXO Cleanup' in the Environmental Security Technology Certification Program. In 2003, the Defense Science Board observed: 'The problem is that instruments that can detect the buried UXOs also detect numerous scrap metal objects and other artifacts, which leads to an enormous amount of expensive digging. Typically 100 holes may be dug before a real UXO is unearthed! The Task Force assessment is that much of this wasteful digging can be eliminated by the use of more advanced technology instruments that exploit modern digital processing andmore » advanced multi-mode sensors to achieve an improved level of discrimination of scrap from UXOs.' Significant progress has been made in discrimination technology. To date, testing of these approaches has been primarily limited to test sites with only limited application at live sites. Acceptance of discrimination technologies requires demonstration of system capabilities at real UXO sites under real world conditions. Any attempt to declare detected anomalies to be harmless and requiring no further investigation require demonstration to regulators of not only individual technologies, but of an entire decision making process. This discrimination study was be the first phase in what is expected to be a continuing effort that will span several years.« less

Usability and acceptability of technology for community-dwelling older adults with mild cognitive impairment and dementia: a systematic literature review.

PubMed

Holthe, Torhild; Halvorsrud, Liv; Karterud, Dag; Hoel, Kari-Anne; Lund, Anne

2018-01-01

The objective of this review was to obtain an overview of the technologies that have been explored with older adults with mild cognitive impairment and dementia (MCI/D), current knowledge on the usability and acceptability of such technologies, and how people with MCI/D and their family carers (FCs) were involved in these studies. Primary studies published between 2007 and 2017 that explored the use of technologies for community-dwelling people with MCI/D were identified through five databases: MEDLINE, PsycINFO, Embase, AMED, and CINAHL. Twenty-nine out of 359 papers met the criteria for eligibility. We used the Mixed Methods Appraisal Tool for quality assessment. A wide range of technologies was presented in the 29 studies, sorted into four domains: 1) safe walking indoors and outdoors; 2) safe living; 3) independent living; and 4) entertainment and social communication. The current state of knowledge regarding usability and acceptability reveals that even if researchers are aware of these concepts and intend to measure usability and acceptability, they seem difficult to assess. Terms such as "user friendliness" and "acceptance" were used frequently. User participation in the 29 studies was high. Persons with MCI/D, FCs, and staff/other older adults were involved in focus groups, workshops, and interviews as part of the preimplementation process. Research regarding technologies to support people with MCI/D seems optimistic, and a wide range of technologies has been evaluated in homes with people with MCI/D and their FCs. A major finding was the importance of including people with MCI/D and their FCs in research, in order to learn about required design features to enhance usability and acceptability. Surprisingly, very few studies reported on the consequences of technology use with regard to quality of life, occupational performance, or human dignity.

Advanced power assessment for Czech lignite, Task 3.6, Part 2. The 2nd international conference on energy and environment: Transitions in East Central Europe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sondreal, E.A.; Mann, M.D.; Weber, G.W.

1995-12-01

On November 1-5, 1994, the Energy & Environmental Research Center (EERC) and Power Research Institute of Prague cosponsored their second conference since 1991 in the Czech Republic, entitled ``Energy and Environment: Transitions in East Central Europe.`` This conference was a continuation of the EERC`s joint commitment, initiated in 1190, to facilitate solutions to short- and long-term energy and environmental problems in East Central Europe. Production of energy from coal in an environmentally acceptable manner is a critical issue facing East Central Europe, because the region continues to rely on coal as its primary energy source. The goal of the conferencemore » was to develop partnerships between industry, government, and the research community in East Central Europe and the United States to solve energy and environmental issues in a manner that fosters economic development. Among the topics addressed at the conference were: conventional and advanced energy generation systems; economic operation of energy systems; air pollution controls; power system retrofitting and repowering, financing options; regulatory issues; energy resource options; waste utilization and disposal; and long-range environmental issues. Selected papers in the proceedings have been processed separately for inclusion in the Energy Science and Technology database.« less

Final Environmental Impact Statement for the construction and operation of Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3070)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeitoun, A.

1994-08-01

This two-volume Final Environmental Impact Statement (FEIS) was prepared by the Nuclear Regulatory Commission (NRC) in accordance with regulation 10 CFR Part 51, which implements the National Environmental Policy Act (NEPA). Volume 1 contains the assessment of the potential environmental impacts for licensing the construction and operation of a proposed gaseous centrifuge enrichment facility to be built in Claiborne Parish, Louisiana, by Louisiana Energy Services, LP. (LES). The proposed facility would have a production capacity of about 866 metric tons annually of up to 5 weight percent enriched UF{sub 6}, using a proven centrifuge technology. Included in the assessment aremore » construction, both normal operations and potential accidents (internal and external events), and the eventual decontamination and decommissioning (D&D)- of the site. Issues addressed include the purpose and need for the facility, the alternatives to the proposed action, potential disposition of the tails, the site selection process, and environmental justice. The NRC staff concludes that the facility can be constructed and operated with small and acceptable impacts on the public and the environment. The FEIS supports issuance of a license to the applicant, Louisiana Energy Services, to authorize construction and operation of the proposed facility.« less

Environmental impacts caused by cemeteries and crematoria, new funeral technologies, and preferences of the Northeastern and Southern Brazilian population as for the funeral process.

PubMed

da Cruz, Nicholas Joseph Tavares; Lezana, Álvaro Guillermo Rojas; Freire Dos Santos, Paulo da Cruz; Santana Pinto, Ibsen Mateus Bittencourt; Zancan, Claudio; Silva de Souza, Gustavo Henrique

2017-11-01

Cemeteries and crematoria are the main funeral ways used in the world nowadays. It is a little-studied segment in the present days, mainly as for the possible environmental impacts in the environment, such as those derived from dental amalgam, prostheses, and dioxins, among other. This article aimed to identify the environmental impacts caused by cemeteries and crematoria and to point out new trends in funeral processes such as freeze-drying and alkaline hydrolysis. The study is justified due to the large part of the Brazilian population that do not know the environmental impacts caused by cemeteries and crematoria, as well as to bring information about the new processes. For that, a research was carried out with 400 people. The main results show that among all the funeral processes, the new freeze-drying process was opted by 33% of the sample. We also identified that the main reasons for choosing the funeral process were less environmental impact (28%), no after-death expenses (grave payment) (16.1%), and the possibility of putting away or throwing away the remains wherever you want (14.9%). Finally, new funeral processes were well accepted by the Brazilian population-those who were interviewed-due to their benefits.

Environmental management assessment of the National Institute for Petroleum and Energy Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-08-01

This report documents the results of the environmental management assessment of the National Institute for Petroleum and Energy Research (NIPER), located in Bartlesville, Oklahoma. The assessment was conducted August 15-26, 1994, by the DOE Office of Environmental Audit (EH-24), located within the Office of Environment, Safety and Health. The assessment included reviews of documents and reports, as well as inspections and observations of selected facilities and operations. Further, the team conducted interviews with management and staff from the Bartlesville Project Office (BPO), the Office of Fossil Energy (FE), the Pittsburgh Energy Technology Center (PETC), state and local regulatory agencies, andmore » BDM Oklahoma (BDM-OK), which is the management and operating (M&O) contractor for NIPER. Because of the transition from a cooperative agreement to an M&O contract in January 1994, the scope of the assessment was to evaluate (1) the effectiveness of BDM-OK management systems being developed and BPO systems in place and under development to address environmental requirements; (2) the status of compliance with DOE Orders, guidance, and directives; and (3) conformance with accepted industry management practices. An environmental management assessment was deemed appropriate at this time in order to identify any systems modifications that would provide enhanced effectiveness of the management systems currently under development.« less

Theory development in health care informatics: Information and communication technology acceptance model (ICTAM) improves the explanatory and predictive power of technology acceptance models.

PubMed

An, Ji-Young

2006-01-01

The purpose of this web-based study was to explain and predict consumers' acceptance and usage behavior of Internet health information and services. Toward this goal, the Information and Communication Technology Acceptance Model (ICTAM) was developed and tested. Individuals who received a flyer through the LISTSERV of HealthGuide were eligible to participate. The study population was eighteen years old and older who had used Internet health information and services for a minimum of 6 months. For the analyses, SPSS (version 13.0) and AMOS (version 5.0) were employed. More than half of the respondents were women (n = 110, 55%). The average age of the respondents was 35.16 years (S.D. = 10.07). A majority reported at least some college education (n = 126, 63%). All of the observed factors accounted for 75.53% of the total variance explained. The fit indices of the structural model were within an acceptable range: chi2/df = 2.38 (chi2 = 1786.31, df = 752); GFI = .71; RMSEA = .08; CFI = .86; NFI = .78. The results of this study provide empirical support for the continued development of ICTAM in the area of health consumers' information and communication technology acceptance.

Perceived usefulness and perceived ease of use of electronic health records among nurses: Application of Technology Acceptance Model.

PubMed

Tubaishat, Ahmad

2017-09-18

Electronic health records (EHRs) are increasingly being implemented in healthcare organizations but little attention has been paid to the degree to which nurses as end-users will accept these systems and subsequently use them. To explore nurses' perceptions of usefulness and ease-of-use of EHRs. The relationship between these constructs was examined, and its predictors were studied. A national exploratory study was conducted with 1539 nurses from 15 randomly selected hospitals, representative of different regions and healthcare sectors in Jordan. Data were collected using a self-administered questionnaire, which was based on the Technology Acceptance Model. Correlations and linear multiple regression were utilized to analyze the data. Jordanian nurses demonstrated a positive perception of the usefulness and ease-of-use of EHRs, and subsequently accepted the technology. Significant positive correlations were found between these two constructs. The variables that predict usefulness were the gender, professional rank, EHR experience, and computer skills of the nurses. The perceived ease-of-use was affected by nursing and EHR experience, and computers skills. This study adds to the growing body of knowledge on issues related to the acceptance of technology in the health informatics field, focusing on nurses' acceptance of EHRs.

Remote-site power generation opportunities for Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, M.L.

1997-03-01

The Energy and Environmental Research Center (EERC) has been working with the Federal Energy Technology Center in Morgantown, West Virginia, to assess options for small, low-cost, environmental acceptable power generation for application in remote areas of Alaska. The goal of this activity was to reduce the use of fuel in Alaskan villages by developing small, low-cost power generation applications. Because of the abundance of high-quality coal throughout Alaska, emphasis was placed on clean coal applications, but other energy sources, including geothermal, wind, hydro, and coalbed methane, were also considered. The use of indigenous energy sources would provide cheaper cleaner power,more » reduce the need for PCE (Power Cost Equalization program) subsidies, increase self-sufficiency, and retain hard currency in the state while at the same time creating jobs in the region. The introduction of economical, small power generation systems into Alaska by US equipment suppliers and technology developers aided by the EERC would create the opportunities for these companies to learn how to engineer, package, transport, finance, and operate small systems in remote locations. All of this experience would put the US developers and equipment supply companies in an excellent position to export similar types of small power systems to rural areas or developing countries. Thus activities in this task that relate to determining the generic suitability of these technologies for other countries can increase US competitiveness and help US companies sell these technologies in foreign countries, increasing the number of US jobs. The bulk of this report is contained in the two appendices: Small alternative power workshop, topical report and Global market assessment of coalbed methane, fluidized-bed combustion, and coal-fired diesel technologies in remote applications.« less

Soil-based filtration technology for air purification: potentials for environmental and space life support application

NASA Astrophysics Data System (ADS)

Nelson, Mark; Bohn, Hinrich

Soil biofiltration, also known as Soil bed reactor (SBR), technology was originally developed in Germany to take advantage of the diversity in microbial mechanisms to control gases producing malodor in industrial processes. The approach has since gained wider international acceptance and seen numerous improvements, for example, by the use of high-organic compost beds to maximize microbial processes. This paper reviews the basic mechanisms which underlay soil processes involved in air purification, advantages and limitations of the technology and the cur-rent research status of the approach. Soil biofiltration has lower capital and operating/energetic costs than conventional technologies and is well adapted to handle contaminants in moderate concentrations. The systems can be engineered to optimize efficiency though manipulation of temperature, pH, moisture content, soil organic matter and airflow rates. SBR technology was modified for application in the Biosphere 2 project, which demonstrated in preparatory research with a number of closed system testbeds that soil could also support crop plants while also serving as soil filters with air pumps to push air through the soil. This Biosphere 2 research demonstrated in several closed system testbeds that a number of important trace gases could be kept under control and led to the engineering of the entire agricultural soil of Biosphere 2 to serve as a soil filtration unit for the facility. Soil biofiltration, coupled with food crop produc-tion, as a component of bioregenerative space life support systems has the advantages of lower energy use and avoidance of the consumables required for other air purification approaches. Expanding use of soil biofiltration can aid a number of environmental applications, from the mitigation of indoor air pollution, improvement of industrial air emissions and prevention of accidental release of toxic gases.

Informal Tools in Formal Context: Adoption of Web 2.0 Technologies among Geography Student Teachers in Ghana

ERIC Educational Resources Information Center

Gyamfi, Stephen Adu

2017-01-01

Despite the popularity of Web 2.0 technologies and their educational benefits in the 21st century classroom environment, their use for teaching and learning purposes is still very limited. This study extended the technology acceptance model (TAM) to empirically examine factors that determine Ghanaian geography student teachers' acceptance of Web…

Impact of Media Richness and Flow on E-Learning Technology Acceptance

ERIC Educational Resources Information Center

Liu, Su-Houn; Liao, Hsiu-Li; Pratt, Jean A.

2009-01-01

Advances in e-learning technologies parallels a general increase in sophistication by computer users. The use of just one theory or model, such as the technology acceptance model, is no longer sufficient to study the intended use of e-learning systems. Rather, a combination of theories must be integrated in order to fully capture the complexity of…

Explaining the Intention to Use Technology among Pre-Service Teachers: A Multi-Group Analysis of the Unified Theory of Acceptance and Use of Technology

ERIC Educational Resources Information Center

Teo, Timothy; Noyes, Jan

2014-01-01

Pre-service teachers' self-reported intentions to use information technology were studied. Two hundred and sixty-four participants completed a survey questionnaire measuring their responses to four constructs (performance expectancy, effort expectancy, social influence and facilitating conditions) derived from the Unified Theory of Acceptance and…

Empirical Testing of a Theoretical Extension of the Technology Acceptance Model: An Exploratory Study of Educational Wikis

ERIC Educational Resources Information Center

Liu, Xun

2010-01-01

This study extended the technology acceptance model and empirically tested the new model with wikis, a new type of educational technology. Based on social cognitive theory and the theory of planned behavior, three new variables, wiki self-efficacy, online posting anxiety, and perceived behavioral control, were added to the original technology…

A Path Analysis of Pre-Service Teachers' Attitudes to Computer Use: Applying and Extending the Technology Acceptance Model in an Educational Context

ERIC Educational Resources Information Center

Teo, Timothy

2010-01-01

The purpose of this study is to examine pre-service teachers' attitudes to computers. This study extends the technology acceptance model (TAM) framework by adding subjective norm, facilitating conditions, and technological complexity as external variables. Results show that the TAM and subjective norm, facilitating conditions, and technological…

Personal and other factors affecting acceptance of smartphone technology by older Chinese adults.

PubMed

Ma, Qi; Chan, Alan H S; Chen, Ke

2016-05-01

It has been well documented that in the 21st century, there will be relatively more older people around the world than in the past. Also, it seems that technology will expand in this era at an unprecedented rate. Therefore, it is of critical importance to understand the factors that influence the acceptance of technology by older people. The positive impact that the use of mobile applications can have for older people was confirmed by a previous study (Plaza et al., 2011). The study reported here aimed to explore and confirm, for older adults in China, the key influential factors of smartphone acceptance, and to describe the personal circumstances of Chinese older adults who use smartphone. A structured questionnaire and face to face individual interviews were used with 120 Chinese older adults (over 55). Structural Equation Modeling was used to confirm a proposed smartphone acceptance model based on Technology Acceptance Model (TAM), and the Unified Theory of Acceptance and Use of Technology (UTAUT). The results showed that those who were younger, with higher education, non-widowed, with better economic condition related to salary or family support were more likely to use smartphone. Also, cost was found to be a critical factor influencing behavior intention. Self-satisfaction and facilitating conditions were proved to be important factors influencing perceived usefulness and perceived ease of use. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Transgenic Plants as Sensors of Environmental Pollution Genotoxicity

PubMed Central

Kovalchuk, Igor; Kovalchuk, Olga

2008-01-01

Rapid technological development is inevitably associated with many environmental problems which primarily include pollution of soil, water and air. In many cases, the presence of contamination is difficult to assess. It is even more difficult to evaluate its potential danger to the environment and humans. Despite the existence of several whole organism-based and cell-based models of sensing pollution and evaluation of toxicity and mutagenicity, there is no ideal system that allows one to make a quick and cheap assessment. In this respect, transgenic organisms that can be intentionally altered to be more sensitive to particular pollutants are especially promising. Transgenic plants represent an ideal system, since they can be grown at the site of pollution or potentially dangerous sites. Plants are ethically more acceptable and esthetically more appealing than animals as sensors of environmental pollution. In this review, we will discuss various transgenic plant-based models that have been successfully used for biomonitoring genotoxic pollutants. We will also discuss the benefits and potential drawbacks of these systems and describe some novel ideas for the future generation of efficient transgenic phytosensors. PMID:27879779

Acceptance and Use of Health Information Technology By Community-Dwelling Elders

PubMed Central

Fischer, Shira H; David, Daniel; Crotty, Bradley H; Dierks, Meghan; Safran, Charles

2014-01-01

Objectives With the worldwide population growing in age, information technology may help meet important needs to prepare and support patients and families for aging. We sought to explore the use and acceptance of information technology for health among the elderly by reviewing the existing literature. Methods Review of literature using PubMed and Google Scholar, references from relevant papers, and consultation with experts. Results Elderly people approach the Internet and health information technology differently than younger people, but have growing rates of adoption. Assistive technology, such as sensors or home monitors, may help ‘aging in place,' but these have not been thoroughly evaluated. Elders face many barriers to using technology for healthcare decision-making, including issues with familiarity, willingness to ask for help, trust of the technology, privacy, and design challenges. Conclusions Barriers must be addressed for these tools to be available to this growing population. Design, education, research, and policy all play roles in addressing these barriers to acceptance and use. PMID:24996581

Acceptance and use of health information technology by community-dwelling elders.

PubMed

Fischer, Shira H; David, Daniel; Crotty, Bradley H; Dierks, Meghan; Safran, Charles

2014-09-01

With the worldwide population growing in age, information technology may help meet important needs to prepare and support patients and families for aging. We sought to explore the use and acceptance of information technology for health among the elderly by reviewing the existing literature. Review of literature using PubMed and Google Scholar, references from relevant papers, and consultation with experts. Elderly people approach the Internet and health information technology differently than younger people, but have growing rates of adoption. Assistive technology, such as sensors or home monitors, may help 'aging in place', but these have not been thoroughly evaluated. Elders face many barriers in using technology for healthcare decision-making, including issues with familiarity, willingness to ask for help, trust of the technology, privacy, and design challenges. Barriers must be addressed for these tools to be available to this growing population. Design, education, research, and policy all play roles in addressing these barriers to acceptance and use. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Advanced chemical hydride-based hydrogen generation/storage system for fuel cell vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Breault, R.W.; Rolfe, J.

1998-08-01

Because of the inherent advantages of high efficiency, environmental acceptability, and high modularity, fuel cells are potentially attractive power supplies. Worldwide concerns over clean environments have revitalized research efforts on developing fuel cell vehicles (FCV). As a result of intensive research efforts, most of the subsystem technology for FCV`s are currently well established. These include: high power density PEM fuel cells, control systems, thermal management technology, and secondary power sources for hybrid operation. For mobile applications, however, supply of hydrogen or fuel for fuel cell operation poses a significant logistic problem. To supply high purity hydrogen for FCV operation, Thermomore » Power`s Advanced Technology Group is developing an advanced hydrogen storage technology. In this approach, a metal hydride/organic slurry is used as the hydrogen carrier and storage media. At the point of use, high purity hydrogen will be produced by reacting the metal hydride/organic slurry with water. In addition, Thermo Power has conceived the paths for recovery and regeneration of the spent hydride (practically metal hydroxide). The fluid-like nature of the spent hydride/organic slurry will provide a unique opportunity for pumping, transporting, and storing these materials. The final product of the program will be a user-friendly and relatively high energy storage density hydrogen supply system for fuel cell operation. In addition, the spent hydride can relatively easily be collected at the pumping station and regenerated utilizing renewable sources, such as biomass, natural, or coal, at the central processing plants. Therefore, the entire process will be economically favorable and environmentally friendly.« less

Acceptability and perceived utility of drone technology among emergency medical service responders and incident commanders for mass casualty incident management.

PubMed

Hart, Alexander; Chai, Peter R; Griswold, Matthew K; Lai, Jeffrey T; Boyer, Edward W; Broach, John

2017-01-01

This study seeks to understand the acceptability and perceived utility of unmanned aerial vehicle (UAV) technology to Mass Casualty Incidents (MCI) scene management. Qualitative questionnaires regarding the ease of operation, perceived usefulness, and training time to operate UAVs were administered to Emergency Medical Technicians (n = 15). A Single Urban New England Academic Tertiary Care Medical Center. Front-line emergency medical service (EMS) providers and senior EMS personnel in Incident Commander roles. Data from this pilot study indicate that EMS responders are accepting to deploying and operating UAV technology in a disaster scenario. Additionally, they perceived UAV technology as easy to adopt yet impactful in improving MCI scene management.

User Acceptance of Picture Archiving and Communication System in the Emergency Department.

PubMed

Goodarzi, Hassan; Khatami, Seyed-Masoud; Javadzadeh, Hammidreza; Mahmoudi, Sadrollah; Khajehpour, Hojjatollah; Heidari, Soleiman; Khodaparast, Morteza; Ebrahimi, Ali; Rasouli, Hamidreza; Ghane, Mohammadreza; Faraji, Mehrdad; Hassanpour, Kasra

2016-04-01

Picture archiving and communication system (PACS) has allowed the medical images to be transmitted, stored, retrieved, and displayed in different locations of a hospital or health system. Using PACS in the emergency department will eventually result in improved efficiency and patient care. In spite of the abundant benefits of employing PACS, there are some challenges in implementing this technology like users' resistance to accept the technology, which has a critical role in PACS success. In this study, we will assess and compare user acceptance of PACS in the emergency departments of three different hospitals and investigate the effect of socio-demographic factors on this acceptance. A variant of technology acceptance model (TAM) has been used in order to measure the acceptance level of PACS in the emergency department of three educational hospitals in Iran. A previously used questionnaire was validated and utilized to collect the study data. A stepwise multiple regression model was used to predict factors influencing acceptance score as the dependent variable. Mean age of participants was 32.9 years (standard deviation [SD] = 6.08). Participants with the specialty degree got a higher acceptance score than the three other groups (Mean ± SD = 4.17 ± 0.20). Age, gender, degree of PACS usage and participant's occupation (profession) did not influence the acceptance score. In our multiple regression model, all three variables of perceived usefulness (PU), perceived ease of use (PEU) and the effect of PACS (change) had a significant effect in the prediction of acceptance. The most influencing factor was change with the beta of 0.22 (P value < 0.001). PACS is highly accepted in all three emergency departments especially among specialists. PU, PEU and change are factors influencing PACS acceptance. Our study can be used as an evidence of PACS acceptance in emergency wards.

The Impact of National Cultural Differences on Nurses' Acceptance of Hospital Information Systems.

PubMed

Lin, Hsien-Cheng

2015-06-01

This study aims to explore the influence of national cultural differences on nurses' perceptions of their acceptance of hospital information systems. This study uses the perspective of Technology Acceptance Model; national cultural differences in terms of masculinity/femininity, individualism/collectivism, power distance, and uncertainty avoidance are incorporated into the Technology Acceptance Model as moderators, whereas time orientation is a control variable on hospital information system acceptance. A quantitative research design was used in this study; 261 participants, US and Taiwan RNs, all had hospital information system experience. Data were collected from November 2013 to February 2014 and analyzed using a t test to compare the coefficients for each moderator. The results show that individualism/collectivism, power distance, and uncertainty avoidance all exhibit significant difference on hospital information system acceptance; however, both masculinity/femininity and time orientation factors did not show significance. This study verifies that national cultural differences have significant influence on nurses' behavioral intention to use hospital information systems. Therefore, hospital information system providers should emphasize the way in which to integrate different technological functions to meet the needs of nurses from various cultural backgrounds.

Lightweight Combat Vehicle S and T Campaign

DTIC Science & Technology

2014-10-06

research in nano-materials, self - healing /diagnosing materials, multi-functional materials, and environmentally acceptable materials. The application...research includes nano-materials, self - healing /diagnosing materials, multi-functional materials, and environmentally acceptable materials.5 The 2003...hubs must be led by a not-for-profit organization, provide 50% cost share match, and are expected to become self -sufficient in 5 years. So far, all

18 CFR 5.22 - Notice of acceptance and ready for environmental analysis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Notice of acceptance and ready for environmental analysis. 5.22 Section 5.22 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.22 Notice o...

Artificial pancreas (AP) clinical trial participants' acceptance of future AP technology.

PubMed

Bevier, Wendy C; Fuller, Serena M; Fuller, Ryan P; Rubin, Richard R; Dassau, Eyal; Doyle, Francis J; Jovanovič, Lois; Zisser, Howard C

2014-09-01

Artificial pancreas (AP) systems are currently an active field of diabetes research. This pilot study examined the attitudes of AP clinical trial participants toward future acceptance of the technology, having gained firsthand experience. After possible influencers of AP technology adoption were considered, a 34-question questionnaire was developed. The survey assessed current treatment satisfaction, dimensions of clinical trial participant motivation, and variables of the technology acceptance model (TAM). Forty-seven subjects were contacted to complete the survey. The reliability of the survey scales was tested using Cronbach's α. The relationship of the factors to the likelihood of AP technology adoption was explored using regression analysis. Thirty-six subjects (76.6%) completed the survey. Of the respondents, 86.1% were either highly likely or likely to adopt the technology once available. Reliability analysis of the survey dimensions revealed good internal consistency, with scores of >0.7 for current treatment satisfaction, convenience (motivation), personal health benefit (motivation), perceived ease of use (TAM), and perceived usefulness (TAM). Linear modeling showed that future acceptance of the AP was significantly associated with TAM and the motivation variables of convenience plus the individual item benefit to others (R(2)=0.26, P=0.05). When insulin pump and continuous glucose monitor use were added, the model significance improved (R(2)=0.37, P=0.02). This pilot study demonstrated that individuals with direct AP technology experience expressed high likelihood of future acceptance. Results support the factors of personal benefit, convenience, perceived usefulness, and perceived ease of use as reliable scales that suggest system adoption in this highly motivated patient population.

Applying the Technology Acceptance Model and flow theory to Cyworld user behavior: implication of the Web2.0 user acceptance.

PubMed

Shin, Dong-Hee; Kim, Won-Yong; Kim, Won-Young

2008-06-01

This study explores attitudinal and behavioral patterns when using Cyworld by adopting an expanded Technology Acceptance Model (TAM). A model for Cyworld acceptance is used to examine how various factors modified from the TAM influence acceptance and its antecedents. This model is examined through an empirical study involving Cyworld users using structural equation modeling techniques. The model shows reasonably good measurement properties and the constructs are validated. The results not only confirm the model but also reveal general factors applicable to Web2.0. A set of constructs in the model can be the Web2.0-specific factors, playing as enhancing factor to attitudes and intention.

Factors influencing nurses' acceptance of hospital information systems in Iran: application of the Unified Theory of Acceptance and Use of Technology.

PubMed

Sharifian, Roxana; Askarian, Fatemeh; Nematolahi, Mohtaram; Farhadi, Payam

User acceptance is a precondition for successful implementation of hospital information systems (HISs). Increasing investment in information technology by healthcare organisations internationally has made user acceptance an important issue in technology implementation and management. Despite the increased focus on hospital information systems, there continues to be user resistance. The present study aimed to investigate the factors affecting hospital information systems nurse-user acceptance of HISs, based on the Unified Theory of Acceptance and Use of Technology (UTAUT), in the Shiraz University of Medical Sciences teaching hospitals. A descriptive-analytical research design was employed to study nurses' adoption and use of HISs. Data collection was undertaken using a cross-sectional survey of nurses (n=303). The research model was examined using the LISREL path confirmatory modeling. The results demonstrated that the nurses' behavioural intention (BI) to use hospital information systems was predicted by Performance Expectancy (PE) (β= 2.34, p<0.01), Effort Expectancy (EE) (β= 2.21, p<0.01), Social Influence (SI) (β= 2.63, p<0.01) and Facilitating Conditions (FC) (β= 2.84, p<0.01). The effects of these antecedents of BI explained 72.8% of the variance in nurses' intention to use hospital information systems (R2 = 0.728). Application of the research model suggested that nurses' acceptance of HISs was influenced by performance expectancy, effort expectancy, social influence and facilitating conditions, with performance expectancy having the strongest effect on user intention.

A Spatial Data Infrastructure to Share Earth and Space Science Data

NASA Astrophysics Data System (ADS)

Nativi, S.; Mazzetti, P.; Bigagli, L.; Cuomo, V.

2006-05-01

Spatial Data Infrastructure:SDI (also known as Geospatial Data Infrastructure) is fundamentally a mechanism to facilitate the sharing and exchange of geospatial data. SDI is a scheme necessary for the effective collection, management, access, delivery and utilization of geospatial data; it is important for: objective decision making and sound land based policy, support economic development and encourage socially and environmentally sustainable development. As far as data model and semantics are concerned, a valuable and effective SDI should be able to cross the boundaries between the Geographic Information System/Science (GIS) and Earth and Space Science (ESS) communities. Hence, SDI should be able to discover, access and share information and data produced and managed by both GIS and ESS communities, in an integrated way. In other terms, SDI must be built on a conceptual and technological framework which abstracts the nature and structure of shared dataset: feature-based data or Imagery, Gridded and Coverage Data (IGCD). ISO TC211 and the Open Geospatial Consortium provided important artifacts to build up this framework. In particular, the OGC Web Services (OWS) initiatives and several Interoperability Experiment (e.g. the GALEON IE) are extremely useful for this purpose. We present a SDI solution which is able to manage both GIS and ESS datasets. It is based on OWS and other well-accepted or promising technologies, such as: UNIDATA netCDF and CDM, ncML and ncML-GML. Moreover, it uses a specific technology to implement a distributed and federated system of catalogues: the GI-Cat. This technology performs data model mediation and protocol adaptation tasks. It is used to work out a metadata clearinghouse service, implementing a common (federal) catalogue model which is based on the ISO 19115 core metadata for geo-dataset. Nevertheless, other well- accepted or standard catalogue data models can be easily implemented as common view (e.g. OGC CS-W, the next coming INSPIRE discovery metadata model, etc.). The proposed solution has been conceived and developed for building up the "Lucan SDI". This is the SDI of the Italian Basilicata Region. It aims to connect the following data providers and users: the National River Basin Authority of Basilicata, the Regional Environmental Agency, the Land Management & Cadastre Regional Authorities, the Prefecture, the Regional Civil Protection Centers, the National Research Council Institutes in Basilicata, the Academia, several SMEs.

Technology Use and Acceptance in the Classroom: Results from an Exploratory Survey Study among Secondary Education Teachers in the USA

ERIC Educational Resources Information Center

Holden, Heather; Ozok, Ant; Rada, Roy

2008-01-01

Purpose: The purpose of this study is to explore the current usage and acceptance of classroom technologies by secondary math/science education teachers in one community. Design/methodology/approach: Forty-seven secondary education math and science teachers in one American city responded to a survey about their use and perceptions of technology in…

Investigating IT Faculty Resistance to Learning Management System Adoption Using Latent Variables in an Acceptance Technology Model.

PubMed

Bousbahi, Fatiha; Alrazgan, Muna Saleh

2015-01-01

To enhance instruction in higher education, many universities in the Middle East have chosen to introduce learning management systems (LMS) to their institutions. However, this new educational technology is not being used at its full potential and faces resistance from faculty members. To investigate this phenomenon, we conducted an empirical research study to uncover factors influencing faculty members' acceptance of LMS. Thus, in the Fall semester of 2014, Information Technology faculty members were surveyed to better understand their perceptions of the incorporation of LMS into their courses. The results showed that personal factors such as motivation, load anxiety, and organizational support play important roles in the perception of the usefulness of LMS among IT faculty members. These findings suggest adding these constructs in order to extend the Technology acceptance model (TAM) for LMS acceptance, which can help stakeholders of the university to implement the use of this system. This may assist in planning and evaluating the use of e-learning.

Investigating IT Faculty Resistance to Learning Management System Adoption Using Latent Variables in an Acceptance Technology Model

PubMed Central

Bousbahi, Fatiha; Alrazgan, Muna Saleh

2015-01-01

To enhance instruction in higher education, many universities in the Middle East have chosen to introduce learning management systems (LMS) to their institutions. However, this new educational technology is not being used at its full potential and faces resistance from faculty members. To investigate this phenomenon, we conducted an empirical research study to uncover factors influencing faculty members' acceptance of LMS. Thus, in the Fall semester of 2014, Information Technology faculty members were surveyed to better understand their perceptions of the incorporation of LMS into their courses. The results showed that personal factors such as motivation, load anxiety, and organizational support play important roles in the perception of the usefulness of LMS among IT faculty members. These findings suggest adding these constructs in order to extend the Technology acceptance model (TAM) for LMS acceptance, which can help stakeholders of the university to implement the use of this system. This may assist in planning and evaluating the use of e-learning. PMID:26491712

Modelling with stakeholders - Next generation

USGS Publications Warehouse

Voinov, Alexey; Kolagani, Nagesh; McCall, Michael K; Glynn, Pierre D.; Kragt, Marit E; Ostermann, Frank O; Pierce, Suzanne A; Ramu, Palaniappan

2016-01-01

This paper updates and builds on ‘Modelling with Stakeholders’ Voinov and Bousquet, 2010 which demonstrated the importance of, and demand for, stakeholder participation in resource and environmental modelling. This position paper returns to the concepts of that publication and reviews the progress made since 2010. A new development is the wide introduction and acceptance of social media and web applications, which dramatically changes the context and scale of stakeholder interactions and participation. Technology advances make it easier to incorporate information in interactive formats via visualization and games to augment participatory experiences. Citizens as stakeholders are increasingly demanding to be engaged in planning decisions that affect them and their communities, at scales from local to global. How people interact with and access models and data is rapidly evolving. In turn, this requires changes in how models are built, packaged, and disseminated: citizens are less in awe of experts and external authorities, and they are increasingly aware of their own capabilities to provide inputs to planning processes, including models. The continued acceleration of environmental degradation and natural resource depletion accompanies these societal changes, even as there is a growing acceptance of the need to transition to alternative, possibly very different, life styles. Substantive transitions cannot occur without significant changes in human behaviour and perceptions. The important and diverse roles that models can play in guiding human behaviour, and in disseminating and increasing societal knowledge, are a feature of stakeholder processes today.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, BURGE ENVIRONMENTAL INC. MULTIPROBE 100

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

Mobile Health Technology Using a Wearable Sensorband for Female College Students With Problem Drinking: An Acceptability and Feasibility Study.

PubMed

Leonard, Noelle Regina; Silverman, Michelle; Sherpa, Dawa Phuti; Naegle, Madeline A; Kim, Hyorim; Coffman, Donna L; Ferdschneider, Marcy

2017-07-07

An increasing number of mobile app interventions have been developed for problem drinking among college students; however, few studies have examined the integration of a mobile app with continuous physiological monitoring and alerting of affective states related to drinking behaviors. The aim of this paper was to evaluate the acceptability and feasibility of Mind the Moment (MtM), a theoretically based intervention for female college students with problem drinking that combines brief, in-person counseling with ecological momentary intervention (EMI) on a mobile app integrated with a wearable sensorband. We recruited 10 non-treatment seeking, female undergraduates from a university health clinic who scored a 3 or higher on the Alcohol Use Disorders Identification Test-Consumption (AUDIT-C) to participate in this pilot study. Study activities involved an in-person baseline intake and 1 follow-up assessment, 2 in-person alcohol brief intervention counseling sessions, and use of MtM technology components (sensorband and EMI on a mobile app) for approximately 3-4 weeks. The intervention used motivational interviewing (MI) and cognitive behavioral therapy (CBT) strategies for reducing risks associated with drinking. We used both qualitative and quantitative assessments to measure acceptability of the intervention and feasibility of delivery. Use patterns of the sensorband and mobile app were also collected. Quantitative and qualitative data indicated high levels of acceptability for the MtM intervention. Altogether, participants made reports on the app on 26.7% (78/292) the days the technology was available to them and completed a total of 325 reports with wide variation between participants. Qualitative findings indicated that sensorband-elicited alerts promoted an increase in awareness of thoughts, feelings, and behaviors related to current environmental stressors and drinking behaviors in theoretically meaningful ways. Specific challenges related to functionality and form of the sensorband were identified. Delivering intervention material "just-in-time," at the moment participants need to use behavioral strategies has great potential to individualize behavioral interventions for reducing problem drinking and other health behaviors. These findings provide initial evidence for the promise of wearable sensors for increasing potency of theoretically grounded mobile health interventions and point to directions for future research and uptake of these technologies. ©Noelle Regina Leonard, Michelle Silverman, Dawa Phuti Sherpa, Madeline A Naegle, Hyorim Kim, Donna L Coffman, Marcy Ferdschneider. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 07.07.2017.

Older Adults' Acceptance of Activity Trackers

PubMed Central

Preusse, Kimberly C.; Mitzner, Tracy L.; Fausset, Cara Bailey; Rogers, Wendy A.

2016-01-01

Objective To assess the usability and acceptance of activity tracking technologies by older adults. Method First in our multi-method approach, we conducted heuristic evaluations of two activity trackers that revealed potential usability barriers to acceptance. Next, questionnaires and interviews were administered to 16 older adults (Mage=70, SDage=3.09, rangeage= 65-75) before and after a 28-day field study to understand facilitators and additional barriers to acceptance. These measurements were supplemented with diary and usage data and assessed if and why users overcame usability issues. Results The heuristic evaluation revealed usability barriers in System Status Visibility; Error Prevention; and Consistency and Standards. The field study revealed additional barriers (e.g., accuracy, format), and acceptance-facilitators (e.g., goal-tracking, usefulness, encouragement). Discussion The acceptance of wellness management technologies, such as activity trackers, may be increased by addressing acceptance-barriers during deployment (e.g., providing tutorials on features that were challenging, communicating usefulness). PMID:26753803

Students Perception towards the Implementation of Computer Graphics Technology in Class via Unified Theory of Acceptance and Use of Technology (UTAUT) Model

NASA Astrophysics Data System (ADS)

Binti Shamsuddin, Norsila

Technology advancement and development in a higher learning institution is a chance for students to be motivated to learn in depth in the information technology areas. Students should take hold of the opportunity to blend their skills towards these technologies as preparation for them when graduating. The curriculum itself can rise up the students' interest and persuade them to be directly involved in the evolvement of the technology. The aim of this study is to see how deep is the students' involvement as well as their acceptance towards the adoption of the technology used in Computer Graphics and Image Processing subjects. The study will be towards the Bachelor students in Faculty of Industrial Information Technology (FIIT), Universiti Industri Selangor (UNISEL); Bac. In Multimedia Industry, BSc. Computer Science and BSc. Computer Science (Software Engineering). This study utilizes the new Unified Theory of Acceptance and Use of Technology (UTAUT) to further validate the model and enhance our understanding of the adoption of Computer Graphics and Image Processing Technologies. Four (4) out of eight (8) independent factors in UTAUT will be studied towards the dependent factor.

Hearing aids: indications, technology, adaptation, and quality control

PubMed Central

Hoppe, Ulrich; Hesse, Gerhard

2017-01-01

Hearing loss can be caused by a number of different pathological conditions. Some of them can be successfully treated, mainly by surgery, depending on the individual’s disease process. However, the treatment of chronic sensorineural hearing loss with damaged cochlear structures usually needs hearing rehabilitation by means of technical amplification. During the last two decades tremendous improvements in hearing aid technology led to a higher quality of the hearing rehabilitation process. For example, due to sophisticated signal processing acoustic feedback could be reduced and hence open fitting options are available even for more subjects with higher degrees of hearing loss. In particular for high-frequency hearing loss, the use of open fitting is an option. Both the users’ acceptance and the perceived sound quality were significantly increased by open fittings. However, we are still faced with a low level of readiness in many hearing impaired subjects to accept acoustic amplification. Since ENT specialists play a key-role in hearing aid provision, they should promote early hearing aid rehabilitation and include this in the counselling even in subjects with mild and moderate hearing loss. Recent investigations demonstrated the benefit of early hearing aid use in this group of patients since this may help to reduce subsequent damages as auditory deprivation, social isolation, development of dementia, and cognitive decline. For subjects with tinnitus, hearing aids may also support masking by environmental sounds and enhance cortical inhibition. The present paper describes the latest developments of hearing aid technology and the current state of the art for amplification modalities. Implications for both hearing aid indication and provision are discussed. PMID:29279726

Determinants of telemedicine acceptance in selected public hospitals in Malaysia: clinical perspective.

PubMed

Zailani, Suhaiza; Gilani, Mina Sayyah; Nikbin, Davoud; Iranmanesh, Mohammad

2014-09-01

The purpose of this study is to explore the determinants of telemedicine acceptance in selected public hospitals in Malaysia and to investigate the effect of health culture on the relationship between these determinants and telemedicine acceptance. Data were gathered by means of a survey of physicians and nurses as the main group of users of telemedicine technology from hospitals that are currently using telemedicine technology. The results indicated that government policies, top management support, perception of usefulness and computer self-efficiency have a positive and significant impact on telemedicine acceptance by public hospitals in Malaysia. The results also confirmed the moderating role of health culture on the relationship between government policies as well as perceived usefulness on telemedicine acceptance by Malaysian hospitals. The results are useful for decision-makers as well as managers to recognize the potential role of telemedicine and assist in the process of implementation, adoption and utilization, and, therefore, spread the usage of telemedicine technology in more hospitals in the country.

Commercialization of Immobilized Amino-Siliane/Amine or Biochar Sorbents for the Capture of Carbon Dioxide from Various Methane Gas Streams. Abstract - Cooperative Research and Development Agreement between BioEnergy Development, LLC and National Energy Technology Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, McMahan L.; Shipley, Greg

Currently, landfill gases are flared-off, which creates carbon dioxide (CO 2) and particulate matter air emissions, while still containing small amounts of unburned methane (CH 4). All of these pollutants contribute to environmental health hazards and global climate change. The same is true with industrial processes that use thermal technologies to process biomass, as these also generate the pollutant gases and particulates. In conjunction with BioEnegy Development (BED), NETL researchers will adapt the Basic Immobilized Amine Sorbent (BIAS) material technology for use in BED’s biorefineries. The goal of this proposed work is to develop NETL’s immobilized hydrophobic amino-silane/amine pellets inmore » combination with BED’s biochar materials (derived from the pyrolysis of biomass) into a commercially-accepted means of capturing/recovering CH 4 and CO 2 gases from landfills. Overall, the NETL-BioEnergy Development partnership will focus on the development and application of this carbon management sorbent technology to commercial carbon capture processes and promotion of clean methane based fuel streams.« less

Knowledge Management

NASA Technical Reports Server (NTRS)

Shariq, Syed Z.; Kutler, Paul (Technical Monitor)

1997-01-01

The emergence of rapidly expanding technologies for distribution and dissemination of information and knowledge has brought to focus the opportunities for development of knowledge-based networks, knowledge dissemination and knowledge management technologies and their potential applications for enhancing productivity of knowledge work. The challenging and complex problems of the future can be best addressed by developing the knowledge management as a new discipline based on an integrative synthesis of hard and soft sciences. A knowledge management professional society can provide a framework for catalyzing the development of proposed synthesis as well as serve as a focal point for coordination of professional activities in the strategic areas of education, research and technology development. Preliminary concepts for the development of the knowledge management discipline and the professional society are explored. Within this context of knowledge management discipline and the professional society, potential opportunities for application of information technologies for more effectively delivering or transferring information and knowledge (i.e., resulting from the NASA's Mission to Planet Earth) for the development of policy options in critical areas of national and global importance (i.e., policy decisions in economic and environmental areas) can be explored, particularly for those policy areas where a global collaborative knowledge network is likely to be critical to the acceptance of the policies.

76 FR 21877 - Environmental Management Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of call for nominations for appointment to the Environmental Management Advisory Board. SUMMARY... Environmental Management Advisory Board. DATES: Nominations will be accepted through May 13, 2011. ADDRESSES...

75 FR 25240 - National Advisory Council for Environmental Policy and Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... ENVIRONMENTAL PROTECTION AGENCY National Advisory Council for Environmental Policy and Technology... for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT is a committee of...

78 FR 74129 - National Advisory Council for Environmental Policy and Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

... for Environmental Policy and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT members represent academia...

Food technology in space habitats

NASA Technical Reports Server (NTRS)

Karel, M.

1979-01-01

The research required to develop a system that will provide for acceptable, nutritious, and safe diets for man during extended space missions is discussed. The development of a food technology system for space habitats capable of converting raw materials produced in the space habitats into acceptable food is examined.

U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA) ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: ARSENIC MONITORING TECHNOLOGIES

EPA Science Inventory

The U.S. Environmental Protection Agency Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This technology ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - GROUNDWATER SAMPLING TECHNOLOGIES - QED ENVIRONMENTAL SYSTEMS INC. WELL WIZARD DEDICATED SAMPLING SYSTEM

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

NASA Technology Investments in Electric Propulsion: New Directions in the New Millennium

NASA Technical Reports Server (NTRS)

Sankovic, John M.

2002-01-01

The last decade was a period of unprecedented acceptance of NASA developed electric propulsion by the user community. The benefits of high performance electric propulsion systems are now widely recognized, and new technologies have been accepted across the commonly. NASA clearly recognizes the need for new, high performance, electric propulsion technologies for future solar system missions and is sponsoring aggressive efforts in this area. These efforts are mainly conducted under the Office of Aerospace Technology. Plans over the next six years include the development of next generation ion thrusters for end of decade missions. Additional efforts are planned for the development of very high power thrusters, including magnetoplasmadynamic, pulsed inductive, and VASIMR, and clusters of Hall thrusters. In addition to the in-house technology efforts, NASA continues to work closely with both supplier and user communities to maximize the acceptance of new technology in a timely and cost-effective manner. This paper provides an overview of NASA's activities in the area of electric propulsion with an emphasis on future program directions.

Assessing the Moderating Effect of the End User in Consumer Behavior: The Acceptance of Technological Implants to Increase Innate Human Capacities.

PubMed

Pelegrín-Borondo, Jorge; Reinares-Lara, Eva; Olarte-Pascual, Cristina; Garcia-Sierra, Marta

2016-01-01

Today, technological implants are being developed to increase innate human capacities, such as memory or calculation speed, and to endow us with new ones, such as the remote control of machines. This study's aim was two-fold: first, to introduce a Cognitive-Affective-Normative (CAN) model of technology acceptance to explain the intention to use this technology in the field of consumer behavior; and second, to analyze the differences in the intention to use it based on whether the intended implant recipient is oneself or one's child (i.e., the moderating effect of the end user). A multi-group analysis was performed to compare the results between the two groups: implant "for me" (Group 1) and implant "for my child" (Group 2). The model largely explains the intention to use the insideable technology for the specified groups [variance explained (R (2)) of over 0.70 in both cases]. The most important variables were found to be "positive emotions" and (positive) "subjective norm." This underscores the need to broaden the range of factors considered to be decisive in technology acceptance to include variables related to consumers' emotions. Moreover, statistically significant differences were found between the "for me" and "for my child" models for "perceived ease of use (PEU)" and "subjective norm." These findings confirm the moderating effect of the end user on new insideable technology acceptance.

Potentiel des méthodes de séparation et stockage du CO2 dans la lutte contre l'effet de serreThe role of CO2 capture and sequestration in mitigation of climate change

NASA Astrophysics Data System (ADS)

Jean-Baptiste, Philippe; Ducroux, René

2003-06-01

Increasing atmospheric level of greenhouse gases are causing global warming and putting at risk the global climate system. The main anthropogenic greenhouse gas is CO 2. Technical solutions exist to reduce CO 2 emission and stabilise atmospheric CO 2 concentration, including energy saving and energy efficiency, switch to lower carbon content fuels like natural gas and to energy sources that operate with zero CO 2 emissions such as renewable or nuclear energy, enhance the natural sinks for CO 2 (forests, soils, etc.), and last but not least, sequester CO 2 from fossil fuels combustion. The purpose of this paper is to provide an overview of the technology and cost for capture and storage of CO 2. Some of the factors that will influence application, including environmental impact, cost and efficiency, are also discussed. Capturing CO 2 and storing it in underground geological reservoirs appears as the best environmentally acceptable option. It can be done with existing technology; however, substantial R&D is needed to improve available technology and to lower the cost. Applicable to large CO 2 emitting industrial facilities such as power plants, cement factories, steel industry, etc., which amount to more than 30% of the global anthropogenic CO 2 emission, it represents a valuable tool in the battle against global warming. To cite this article: P. Jean-Baptiste, R. Ducroux, C. R. Geoscience 335 (2003).

Coal gasifier cogeneration powerplant project

NASA Technical Reports Server (NTRS)

Shure, L. I.; Bloomfield, H. S.

1980-01-01

Industrial cogeneration and utility pr systems were analyzed and a conceptual design study was conducted to evaluate the economic feasibility of a coal gasifier power plant for NASA Lewis Research Center. Site location, plant size, and electric power demand were considered in criteria developed for screening and selecting candidates that could use a wide variety of coals, including that from Ohio. A fluidized bed gasifier concept was chosen as the baseline design and key components of the powerplant were technically assessed. No barriers to environmental acceptability are foreseen. If funded, the powerplant will not only meet the needs of the research center, but will reduce the commercial risk for utilities and industries by fully verifying and demonstrating the technology, thus accelerating commercialization.

Students' Acceptance of Tablet PCs in the Classroom

ERIC Educational Resources Information Center

Ifenthaler, Dirk; Schweinbenz, Volker

2016-01-01

In recent years digital technologies, such as tablet personal computers (TPCs), have become an integral part of a school's infrastructure and are seen as a promising way to facilitate students' learning processes. This study empirically tested a theoretical model derived from the technology acceptance model containing key constructs developed in…

A Technological Acceptance of Remote Laboratory in Chemistry Education

ERIC Educational Resources Information Center

Ling, Wendy Sing Yii; Lee, Tien Tien; Tho, Siew Wei

2017-01-01

The purpose of this study is to evaluate the technological acceptance of Chemistry students, and the opinions of Chemistry lecturers and laboratory assistants towards the use of remote laboratory in Chemistry education. The convergent parallel design mixed method was carried out in this study. The instruments involved were questionnaire and…

The Influence of Teachers' Conceptions of Teaching and Learning on Their Technology Acceptance

ERIC Educational Resources Information Center

Teo, Timothy; Zhou, Mingming

2017-01-01

Prior research has attempted to incorporate different personal variables within extant theories of technology acceptance models (TAMs). This study further extends TAM by incorporating teachers' conceptions of teaching and learning (CoTL) in two forms: constructivist and traditional conceptions. The moderating effects of teachers' demographic…

Technology Acceptance Predictors among Student Teachers and Experienced Classroom Teachers

ERIC Educational Resources Information Center

Smarkola, Claudia

2007-01-01

This study investigated 160 student teachers' and 158 experienced teachers' self-reported computer usage and their future intentions to use computer applications for school assignments. The Technology Acceptance Model (TAM) was used as the framework to determine computer usage and intentions. Statistically significant results showed that after…

Users' Behavior towards Ubiquitous M-Learning

ERIC Educational Resources Information Center

Suki, Norazah Mohd; Suki, Norbayah Mohd

2011-01-01

Mobile technologies have enabled a new way of communicating, for whom mobile communications are part of normal daily interaction. This paper explores the proposed and verified Technology Acceptance Model (TAM) that can be employed to explain the acceptance of Mobile Learning (M-learning), an activity in which users access learning material with…

Toilet revolution in China.

PubMed

Cheng, Shikun; Li, Zifu; Uddin, Sayed Mohammad Nazim; Mang, Heinz-Peter; Zhou, Xiaoqin; Zhang, Jian; Zheng, Lei; Zhang, Lingling

2018-06-15

The wide-spread prevalence of unimproved sanitation technologies has been a major cause of concern for the environment and public health, and China is no exception to this. Towards the sanitation issue, toilet revolution has become a buzzword in China recently. This paper elaborates the backgrounds, connotations, and actions of the toilet revolution in China. The toilet revolution aims to create sanitation infrastructure and public services that work for everyone and that turn waste into value. Opportunities for implementing the toilet revolution include: fulfilling Millennium Development Goals and new Sustainable Development Goals; government support at all levels for popularizing sanitary toilet; environmental protection to alleviate wastewater pollution; resource recovery from human waste and disease prevention for health and wellbeing improvement. Meanwhile, the challenges faced are: insufficient funding and policy support, regional imbalance and lagging approval processes, weak sanitary awareness and low acceptance of new toilets, lack of R&D and service system. The toilet revolution requires a concerted effort from many governmental departments. It needs to address not only technology implementation, but also social acceptance, economic affordability, maintenance issues and, increasingly, gender considerations. Aligned with the ecological sanitation principles, it calls for understanding issues across the entire sanitation service chain. Public-private partnership is also recommended to absorb private capital to make up the lack of funds, as well as arouse the enthusiasm of the public. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

77 FR 15091 - Environmental Management Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of Solicitation of Nominations for Appointment as a member of the Environmental Management... Environmental Management Advisory Board (EMAB). DATES: The deadline for nominations for members will be accepted...

75 FR 52716 - Environmental Technologies Trade Advisory Committee (ETTAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

... DEPARTMENT OF COMMERCE Environmental Technologies Trade Advisory Committee (ETTAC) AGENCY... Environmental Technologies Trade Advisory Committee (ETTAC) will hold its quarterly meeting to discuss environmental technologies industry competitiveness issues, the National Export Initiative, and general...

75 FR 18482 - Environmental Technologies Trade Advisory Committee (ETTAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-12

... DEPARTMENT OF COMMERCE Environmental Technologies Trade Advisory Committee (ETTAC) AGENCY... Environmental Technologies Trade Advisory Committee (ETTAC) will hold its quarterly meeting to discuss environmental technologies trade liberalization, industry competitiveness issues, and general Committee...

Understanding consumer attitudes toward food technologies in Canada.

PubMed

Henson, Spencer; Annou, Mamane; Cranfield, John; Ryks, Joanne

2008-12-01

This article reports a study on consumer attitudes to 21 food and nonfood technologies in Canada. The study involves repertory grid interviews with 36 food consumers, the data from which are analyzed using generalized Procrustes analysis. Results highlight the role of perceived risk and perceived benefit in determining the acceptability of the technologies, with individual technologies lying along a continuum between the two. For technology as a whole and the 21 specific technologies, the perceived risk and perceived benefit constructs were the dominant determinants of consumer acceptability. While perceptions of perceived risk and perceived benefit differed between individual respondents, there were very limited consistent relations with a range of sociodemographic variables.

World Market Development and Consumer Acceptance of Irradiation Technology

PubMed Central

Maherani, Behnoush; Hossain, Farah; Criado, Paula; Ben-Fadhel, Yosra; Salmieri, Stephane; Lacroix, Monique

2016-01-01

Food irradiation is an efficient technology that can be used to ensure food safety by eliminating insects and pathogens to prolong the shelf life. The process could be applied to fresh or frozen products without affecting the nutritional value. Presently more than 60 countries have adopted the technology. However, the technology adaptation differs from one country to another and, in some cases, consumers’ misunderstanding and lack of acceptance may hinder the technology adaptation process. This review summarizes the development of irradiation treatment worldwide and consumer attitudes towards the introduction of this technology. Also, the wholesomeness, beneficial effects, and regulation of irradiation are assessed. PMID:28231173

Towards sustainability in offshore oil and gas operations

NASA Astrophysics Data System (ADS)

Khan, M. Ibrahim

Human activities are causing irreversible damage to the natural world and threaten our ability to sustain future generations. According to Millennium Ecosystem Assessment of 2005, sixty percent of world pristine habitats are destroyed or disturbed and species extinction rate is 100-1000 times higher than the normal background rate. One of the main reasons of these problems is the use of unsustainable technology. In this dissertation, the essential features of the modern technology development are discussed and a new single-parameter screening criterion is proposed. This criterion will allow the development of truly sustainable technologies. Previously developed technologies, particularly the ones developed after the industrial revolution, are evaluated based on the new criterion. The root cause for unsustainability of these technologies especially in the energy sector is discussed. The proposed criterion is applied to the petroleum sector. Petroleum hydrocarbons are considered to be the lifeblood of the modern society. Petroleum industry that took off from the golden era of 1930's never ceased to dominate all aspects of our society. Until now, there is no suitable alternative to fossil fuel and all trends indicate continued dominance of the petroleum industry in the foreseeable future. Even though petroleum operations have been based on solid scientific excellence and engineering marvels; only recently it has been discovered that many of the practices are not environmentally sustainable. Practically all activities of hydrocarbon operations are accompanied by undesirable discharges of liquid, solid, and gaseous wastes, which have enormous impacts on the environment. Consequently, reducing environmental impact is the most pressing issue today and many environmentalist groups are calling for curtailing petroleum operations altogether. There is clearly a need to develop a new management approach in hydrocarbon operations. This approach will have to be environmentally acceptable, economically profitable and socially responsible. This dissertation discusses the framework of true 'sustainability' for practically all aspects oil and gas operations and nature-based resource operations. Sustainability of existing offshore oil and gas operations techniques are analyzed and new nature-based technologies are proposed. Also evaluated are the fate and effect, environmental impact, risk factors, and the green supply chain in the case of seismic, drilling, production and decommissioning of oil operations. It is demonstrated with detailed examples that using the new approach will be economically more beneficial than the conventional approach, even in the short-term. The dissertation also examines the present status of petroleum operations with respect to waste generation, improper resource management, and the usage of toxic compounds in the overall lifecycle. To achieve true sustainability, some innovative models and technologies are presented. They include achievement of zero emissions, zero waste of resources, zero waste in activities, zero use of toxics, and zero waste in product life-cycle. This dissertation also discusses the environmental and technological problems of the petroleum sector and provides guidelines to achieve overall sustainability in oil company activities. Finally, this dissertation shows that inherent sustainability can be achieved by the involvement of community participation. The new screening tool proposed in this dissertation provides proper guidelines to achieve true sustainability in the technology development and other resource development operations.

The impact of technology dependency on device acceptance and quality of life in persons with implantable cardioverter defibrillators.

PubMed

Udlis, Kimberly A

2013-01-01

The impact of implantable cardioverter defibrillator (ICD) technology on the quality of life (QOL) experienced by recipients has been a major focus of recent research. Numerous studies have found psychological distress to be important in determining QOL in persons receiving ICDs, yet the source of psychological distress is not well understood. The aim of this study was to determine the impact of technology dependency on psychological outcomes in ICD recipients. With the use of a cross-sectional design, 161 ICD recipients from 1 device clinic were mailed self-administered questionnaires, including the Dependency on Technology Scale, Brief Illness Perception Questionnaire, Florida Shock Anxiety Scale, Florida Patient Acceptance Survey, and Short Form-12 (SF-12). Hierarchical multiple regressions and analyses of variance were performed. The final sample size was 101 participants. Mean (SD) age was 68 (13) years; 72% of the participants were men, 99% were white, and 30% reported receiving a shock(s). A total of 80% reported positive attitudes toward technology dependency; 14%, neutral; and 6%, negative (Dependency on Technology Scale). Illness perceptions were positive (Brief Illness Perception Questionnaire; mean[SD], 34.5 [12.6]), shock anxiety was elevated (Florida Shock Anxiety Scale; mean [SD], 16.5 [6.7]), and device acceptance was good (Florida Patient Acceptance Survey; mean [SD], 74.9 [17.0]). Physical health QOL was low (SF-12; mean [SD], 38.6 [11.3]) and mental health QOL was moderate (SF-12; mean [SD], 50.6 [10.0]). Attitudes toward technology dependency significantly accounted for the variance seen in device acceptance and mental health QOL beyond age, gender, number of shocks, illness perceptions, and shock anxiety by 5.7% (P = .001) and 3.3% (P = .04), respectively. Significant differences were seen in device acceptance between those with negative and neutral attitudes (P = .001) and those with negative and positive attitudes (P < .001) and in shock anxiety and mental health QOL between those with negative and those with positive attitudes (P < .001). Attitudes toward technology dependency is significantly associated with psychological outcomes and may explain the psychological distress in some ICD recipients. Degree of positivity toward technology dependency influences these outcomes. Research evaluating attitudes toward technology dependency and testing of interventions focusing on these attitudes is warranted.

Environmental and Social Impacts Assessment and Public Acceptability of a Wind Power Project in Korea

NASA Astrophysics Data System (ADS)

CHO, K.; Shin, K. H.; Kim, T. Y.; Seo, A.

2017-12-01

Total renewable energy production in Korea is 13,062,000 Ton of Oil Equivalent (TOE) as of 2015. Renewable energy accounts for 4.54% of the total primary energy production, and wind energy makes up 2.17% of the renewable energy production in Korea. Meanwhile, it aims to expand the supply of the wind energy in renewable energy production up to 18.2% by 2035. In Korea, where 64% of its territory is mountain, onshore wind power has shown problems such as nature destruction, noise, tidal damage and landscape destruction. In this regard, offshore wind power has claimed an attention as the alternative of the onshore project. Although it effectively makes up such disadvantages of the onshore wind power, there is still an unsettled problem of the public conflict. For instance, the case of offshore wind power generation in Jeju Island in Korea is suffering serious conflict due to the opposition of nearby residents and fishermen. The lacks of communication, community benefit plans, and compensation for fishermen are the reasons for the opposition. Above all, little consideration on public acceptability in the process of the development project is the fundamental reason. In short, the conflicts triggered in Korea are not caused by the impacts on natural or living environment, but rather by the lack of communication. This study suggests participatory technology impact assessment and a plan for community benefits as a methodology to establish a system for agreement formation on the offshore wind power. Participatory technology impact assessment is a model emphasizing on citizen deliberation. Consensus conference and scenario workshop can represent the assessment. Whereas the compensation prepared for the specific resident group targets only a few stakeholders, the plan prepared by the committee of the residents enhances the public acceptance by returning a development profit to all residents in a broader scope. The results of participant's evaluation on the scenario workshop in 2012 are as follows. The need for public participation in science and technology increased from 58% to 83%, 92% agreed to the content of the scenario discussed, 71% agreed to the effectiveness of the scenario as an alternative, and 100% agreed to the validity of a scenario workshop as a means of communication that enhances the public acceptability

Gender Differences in Teacher Computer Acceptance

ERIC Educational Resources Information Center

Yuen, Allan H. K.; Ma, Will W. K.

2002-01-01

Teachers' computer acceptance is an important factor to the successful use of computers in education. This article explores the gender differences in teacher computer acceptance. The Technology Acceptance Model (TAM) was used as the framework to determine if such differences are present. Survey questionnaires were administered to 186 preservice…

Tanks Focus Area annual report FY2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2000-12-01

The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation effort with tanks containing hazardous and radioactive waste resulting from the production of nuclear materials. With some 90 million gallons of waste in the form of solid, sludge, liquid, and gas stored in 287 tanks across the DOE complex, containing approximately 650 million curies, radioactive waste storage tank remediation is the nation's highest cleanup priority. Differing waste types and unique technical issues require specialized science and technology to achieve tank cleanup in an environmentally acceptable manner. Some of the waste has been stored for overmore » 50 years in tanks that have exceeded their design lives. The challenge is to characterize and maintain these contents in a safe condition and continue to remediate and close each tank to minimize the risks of waste migration and exposure to workers, the public, and the environment. In 1994, the DOE's Office of Environmental Management (EM) created a group of integrated, multiorganizational teams focusing on specific areas of the EM cleanup mission. These teams have evolved into five focus areas managed within EM's Office of Science and Technology (OST): Tanks Focus Area (TFA); Deactivation and Decommissioning Focus Area; Nuclear Materials Focus Area; Subsurface Contaminants Focus Area; and Transuranic and Mixed Waste Focus Area.« less

The Effects of Sequential Environmental and Harvest Stressors on the Sensory Characteristics of Cultured Channel Catfish (Ictalurus Punctatus) Fillets.

PubMed

Ciaramella, Michael A; Kim, Taejo; Avery, Jimmy L; Allen, Peter J; Schilling, M Wes

2016-08-01

Stress during fish culture alters physiological homeostasis and affects fillet quality. Maintenance of high-quality seafood is important to ensure the production of a marketable product. This study assessed how sequential stressors affect the sensory and quality characteristics of catfish (Ictalurus punctatus) fillets. Three stress trials were conducted where temperature (25 or 33 °C) and dissolved oxygen (DO, approximately 2.5 or >5 mg/L) were manipulated followed by socking and transport stress. After each stage of harvest (environmental stress, socking, and transport), fillet yield, consumer acceptability, descriptive evaluation, cook loss, tenderness, and pH were evaluated. Fillet yield decreased with increasing severity of environmental stress. Fillets from the severe stress treatment (33 °C, approximately 2.5 mg/L) received the highest acceptability scores (P < 0.05). Control fillets (25 °C, >5 mg/L) were the least acceptable (P < 0.05). Increased intensity of less favorable flavor attributes commonly associated with catfish resulted in the differences in acceptability among treatments. As fish progressed through the harvest event, cook loss decreased, tenderness increased, and pH increased, indicating that stress induced textural changes. The data suggest that although environmental stress results in slight changes in flavor attributes, its effects on acceptability are minor with fillets from all treatments still liked (>6 on a 9 point scale). Socking and transport were identified to positively affect textural characteristics of catfish fillets. Although the effects observed were not likely to negatively impact consumer acceptance, a strict management plan should be followed to maintain consistency in the product and avoid changes in stressors that might alter quality more drastically. © 2016 Institute of Food Technologists®

78 FR 21909 - Environmental Technologies Trade Advisory Committee; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-12

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The teleconference....S. exports of environmental technologies, goods, services, and products. The ETTAC was originally...

76 FR 66912 - Environmental Technologies Trade Advisory Committee Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The teleconference... expand U.S. exports of environmental technologies, goods, services, and products. The ETTAC was...

76 FR 77776 - Environmental Technologies Trade Advisory Committee Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The teleconference.... exports of environmental technologies, goods, services, and products. The ETTAC was originally chartered...

75 FR 1590 - Environmental Technologies Trade Advisory Committee (ETTAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... DEPARTMENT OF COMMERCE Environmental Technologies Trade Advisory Committee (ETTAC) AGENCY... Environmental Technologies Trade Advisory Committee (ETTAC) will hold its first plenary meeting of 2010 to discuss environmental technologies trade liberalization, industry competitiveness issues, and general...

Trust, confidence, procedural fairness, outcome fairness, moral conviction, and the acceptance of GM field experiments.

PubMed

Siegrist, Michael; Connor, Melanie; Keller, Carmen

2012-08-01

In 2005, Swiss citizens endorsed a moratorium on gene technology, resulting in the prohibition of the commercial cultivation of genetically modified crops and the growth of genetically modified animals until 2013. However, scientific research was not affected by this moratorium, and in 2008, GMO field experiments were conducted that allowed us to examine the factors that influence their acceptance by the public. In this study, trust and confidence items were analyzed using principal component analysis. The analysis revealed the following three factors: "economy/health and environment" (value similarity based trust), "trust and honesty of industry and scientists" (value similarity based trust), and "competence" (confidence). The results of a regression analysis showed that all the three factors significantly influenced the acceptance of GM field experiments. Furthermore, risk communication scholars have suggested that fairness also plays an important role in the acceptance of environmental hazards. We, therefore, included measures for outcome fairness and procedural fairness in our model. However, the impact of fairness may be moderated by moral conviction. That is, fairness may be significant for people for whom GMO is not an important issue, but not for people for whom GMO is an important issue. The regression analysis showed that, in addition to the trust and confidence factors, moral conviction, outcome fairness, and procedural fairness were significant predictors. The results suggest that the influence of procedural fairness is even stronger for persons having high moral convictions compared with persons having low moral convictions. © 2012 Society for Risk Analysis.

Environmental, health, and safety issues of fuel cells in transportation. Volume 1: Phosphoric acid fuel-cell buses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ring, S

1994-12-01

The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase I of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, throughmore » a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase III. After completing Phase II, DOE plans a comprehensive performance testing program (Phase HI) to verify that the buses meet stringent transit industry requirements. The Phase III study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on these issues. The study examines health and safety together because they are integrally related. In addition, this report briefly discusses two environmental issues that are of concern to the Environmental Protection Agency (EPA). The first issue involves a surge battery used by the PAFC bus that contains hazardous constituents. The second issue concerns the regulated air emissions produced during operation of the PAFC bus.« less

TITLE: Environmental, health, and safety issues offuel cells in transportation. Volume 1: Phosphoricacid fuel-cell buses

NASA Astrophysics Data System (ADS)

Ring, Shan

1994-12-01

The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase 1 of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, through a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase 3. After completing Phase 2, DOE plans a comprehensive performance testing program (Phase H1) to verify that the buses meet stringent transit industry requirements. The Phase 3 study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on these issues. The study examines health and safety together because they are integrally related. In addition, this report briefly discusses two environmental issues that are of concern to the Environmental Protection Agency (EPA). The first issue involves a surge battery used by the PAFC bus that contains hazardous constituents. The second issue concerns the regulated air emissions produced during operation of the PAFC bus.

Bacillus thuringiensis (Bt) transgenic crop: an environment friendly insect-pest management strategy.

PubMed

Kumar, Suresh; Chandra, Amaresh; Pandey, K C

2008-09-01

Introduction of DDT (dichloro-diphenyl-trichloroethane) and following move towards indiscriminate use of synthetic chemical insecticides led to the contamination of water and food sources, poisoning of non-target beneficial insects and development of insect-pests resistant to the chemical insecticides. Increased public concems about the adverse environmental effects of indiscriminate use of chemical insecticides prompted search of altemative methods for insect-pest control. One of the promising alternatives has been the use of biological control agents. There is well-documented history of safe application of Bt (B. thuringiensis, a gram positive soil bacterium) as effective biopesticides and a number of reports of expression of delta-endotoxin gene(s) in crop plants are available. Only a few insecticidal sprays are required on Bt transgenic crops, which not only save cost and time, but also reduce health risks. Insects exhibit remarkable ability to develop resistance to different insecticidal compounds, which raises concern about the unsystematic use of Bt transgenic technology also. Though resistance to Bt products among insect species under field conditions has been rare, laboratory studies show that insects are capable of developing high levels of resistance to one ormore Cry proteins. Now it is generally agreed that 'high-dose/refuge strategy' is the most promising and practical approach to prolong the effectiveness of Bt toxins. Although manybiosafety concerns, ethical and moral issues exist, area under Bt transgenic crops is rapidly increasing and they are cultivated on more than 32 million hectares world over Even after reservation of European Union (EU) for acceptance of geneticaly modified (GM) crops, 6 out of 25 countries have already adopted Bt crops and many otherindustrial countries will adopt Bt transgenic crops in near future. While the modem biotechnology has been recognized to have a great potential for the promotion of human well-being, adoption of biosafety protocol is necessary to protect human health and environment from the possible adverse effects of the products of genetic engineering. The debate between proponents and opponents of GM technology has created major obstacles in hamessing benefits of the technology It has now become clear that transgenics willbe accepted by the public only when doubts related with general risks and environmental safety are adequately dispelled. Thus, there is need to organize public awareness and present the benefits of Bt transgenic crops to improve social attitude for their rational deployment. In this review, an attempt has been made to discuss social and environmental safety issues of Bt transgenic crops.

Effects of disciplinary cultures of researchers and research trainees on the acceptability of nanocarriers for drug delivery in different contexts of use: a mixed-methods study

NASA Astrophysics Data System (ADS)

Chenel, Vanessa; Boissy, Patrick; Cloarec, Jean-Pierre; Patenaude, Johane

2015-04-01

The acceptability of nanomedical applications, which have the potential to generate ethical and societal impacts, is a significant factor in the deployment of nanomedicine. A lack of fit between nanomedical applications and society's values may result from a partial consideration of such impacts. New approaches for technological evaluation focused on impact perception, acceptance, and acceptability are needed to go beyond traditional technology assessment approaches used with nanotechnology, which focus mainly on toxicological and safety criteria. Using a new evaluative approach based on perceived impacts of nanotechnology, the objective of this study was to assess perceptions among researchers and research trainees familiar with emergent technologies and from different disciplinary background the scope of acceptability judgments made towards the use of nanocarriers. This mixed-methods study was based on scenarios presenting two types of drug-delivery nanocarriers (carbon, synthetic DNA) in two contexts of use (lung cancer treatment, seasonal flu treatment). Researchers and research trainees in the natural sciences and engineering, and the social sciences and the humanities were invited by email to take part in this project. An online questionnaire followed by semi-directed interviews allowed characterization of disciplinary divergences regarding to impact perception, acceptance, and acceptability of the scenarios. The results suggest that impact perception is influenced by disciplinary culture. Also, trends can be seen between respondents' profiles and variables of acceptance and acceptability, and certain components of the acceptability judgement are specific to each disciplinary culture. The acknowledgment and consideration of these disciplinary divergences could allow, among others, for opening up interdisciplinary dialogue on matters related to the acceptability of nanomedical applications and their developments.

Effects of disciplinary cultures of researchers and research trainees on the acceptability of nanocarriers for drug delivery in different contexts of use: a mixed-methods study.

PubMed

Chenel, Vanessa; Boissy, Patrick; Cloarec, Jean-Pierre; Patenaude, Johane

The acceptability of nanomedical applications, which have the potential to generate ethical and societal impacts, is a significant factor in the deployment of nanomedicine. A lack of fit between nanomedical applications and society's values may result from a partial consideration of such impacts. New approaches for technological evaluation focused on impact perception, acceptance, and acceptability are needed to go beyond traditional technology assessment approaches used with nanotechnology, which focus mainly on toxicological and safety criteria. Using a new evaluative approach based on perceived impacts of nanotechnology, the objective of this study was to assess perceptions among researchers and research trainees familiar with emergent technologies and from different disciplinary background the scope of acceptability judgments made towards the use of nanocarriers. This mixed-methods study was based on scenarios presenting two types of drug-delivery nanocarriers (carbon, synthetic DNA) in two contexts of use (lung cancer treatment, seasonal flu treatment). Researchers and research trainees in the natural sciences and engineering, and the social sciences and the humanities were invited by email to take part in this project. An online questionnaire followed by semi-directed interviews allowed characterization of disciplinary divergences regarding to impact perception, acceptance, and acceptability of the scenarios. The results suggest that impact perception is influenced by disciplinary culture. Also, trends can be seen between respondents' profiles and variables of acceptance and acceptability, and certain components of the acceptability judgement are specific to each disciplinary culture. The acknowledgment and consideration of these disciplinary divergences could allow, among others, for opening up interdisciplinary dialogue on matters related to the acceptability of nanomedical applications and their developments.

An Empirical Analysis of Citizens' Acceptance Decisions of Electronic-Government Services: A Modification of the Unified Theory of Acceptance and Use of Technology (UTAUT) Model to Include Trust as a Basis for Investigation

ERIC Educational Resources Information Center

Awuah, Lawrence J.

2012-01-01

Understanding citizens' adoption of electronic-government (e-government) is an important topic, as the use of e-government has become an integral part of governance. Success of such initiatives depends largely on the efficient use of e-government services. The unified theory of acceptance and use of technology (UTAUT) model has provided a…

Emerging environmental technologies and environmental technology policy

NASA Astrophysics Data System (ADS)

Clarke, Leon Edward

This dissertation explores the role and design of environmental technology policy when environmental innovation is embodied in emerging environmental technologies such as photovoltaic cells or fuel cells. The dissertation consists of three individual studies, all of which use a simplified, general model industry between an emerging environmental technology and an entrenched, more-polluting technology. It clarifies the situations in which environmental technology policy can achieve high welfare and those in which it cannot; and it separates the possible situations an emerging environmental technology might face into four scenarios, each with its own technology policy recommendations. The second study attempts to clarify which of two factors is having a larger limiting effect on private investment in photovoltaics: the failure to internalize the environmental costs of fossil fuel electricity generation or a broad set of innovation market failures that apply to innovation irrespective of environmental concerns. The study indicates that innovation market failures are probably having a significantly larger impact than incomplete internalization. The third study explores the effectiveness of adoption subsidies at encouraging private-sector innovation. The conclusion is that adoption subsidies probably have only a limited effect on long-term, private-sector research. Two important general conclusions of the dissertation are (1) that optimal technology policy should begin with technology-push measures and end with demand-pull measures; and (2) that the technological response to internalization instruments, such as emissions taxes, may be highly nonlinear.

PERFORMANCE VERIFICATION OF ANIMAL WATER TREATMENT TECHNOLOGIES THROUGH EPA'S ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

The U.S. Environmental Protection Agency created the Environmental Technology Verification Program (ETV) to further environmental protection by accelerating the commercialization of new and innovative technology through independent performance verification and dissemination of in...

77 FR 6064 - Environmental Technologies Trade Advisory Committee Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The teleconference... administration of programs to expand U.S. exports of environmental technologies, goods, services, and products...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT; ENVIRONMENTAL DECISION SUPPORT SOFTWARE; ENVIRONMENTAL SOFTWARE SITEPRO VERSION 2.0"

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

Acceptance and usability of a home-based monitoring tool of health indicators in children of people with dementia: a Proof of Principle (POP) study.

PubMed

Boessen, April Bcg; Vermeulen, Joan; de Witte, Luc P

2017-01-01

Large-scale cohort studies are needed to confirm the relation between dementia and its possible risk factors. The inclusion of people with dementia in research is a challenge, however, children of people with dementia are at risk and are highly motivated to participate in dementia research. For technologies to support home-based data collection during large-scale studies, participants should be able and willing to use technology for a longer period of time. This study investigated acceptance and usability of iVitality, a research platform for home-based monitoring of dementia health indicators, in 151 children of people with dementia and investigated which frequency of measurements is acceptable for them. Participants were randomized to fortnightly or monthly measurements. At baseline and after 3 months, participants completed an online questionnaire regarding the acceptance (Technology Acceptance Model; 38 items) and usability (Post-Study System Usability Questionnaire; 24 items) of iVitality. Items were rated from 1 (I totally disagree) to 7 (I totally agree). Participants were also invited to take part in an online focus group (OFG) after 3 months of follow-up. Descriptive statistics and both two-sample/independent and paired t -tests were used to analyze the online questionnaires and a directed content analysis was used to analyze the OFGs. Children of people with dementia accept iVitality after long-term use and evaluate iVitality as a user-friendly, useful, and trusted technology, despite some suggestions for improvement. Overall, mean scores on acceptance and usability were higher than 5 (I somewhat agree), although the acceptance subscales "social influence" and "time" were rated somewhat lower. No significant differences in acceptance and usability were found between both protocol groups. Over time, "affect" significantly increased among participants measuring blood pressure fortnightly. iVitality has the potential to be used in large-scale studies for home-based monitoring of health indicators related to the development of dementia.

Integration of Pneumatic Technology in Powered Mobility Devices

PubMed Central

Daveler, Brandon; Wang, Hongwu; Gebrosky, Benjamin; Grindle, Garrett G.; Schneider, Urs

2017-01-01

Advances in electric motors, electronics, and control systems have enhanced the capability and drivability of electric power mobility devices over the last 60 years. Yet, battery technologies used in powered mobility devices (PMDs) have not kept pace. Recent advances in pneumatic technology, primarily the high torque, low speed design of rotary piston air motors, directly align with the needs of PMD. Pneumatic technology has advantages over battery-powered technology, including lighter weight, lower operating costs, decreased environmental impact, better reliability, and increased safety. Two prototypes were created that incorporated rotary piston air motors, high-pressure air tanks, and air-pressure regulators. Prototype 1 was created by modifying an existing electric PMD. Range tests were performed to determine the feasibility of pneumatic technology and the optimal combination of components to allow the longest range possible at acceptable speeds over ideal conditions. Using a 1.44 L air tank for feasibility testing, prototype 1 was capable of traveling 800 m, which confirmed the feasibility of pneumatic technology usage in PMDs. Prototype 2 was designed based on the testing results from prototype 1. After further optimization of prototype 2, the average maximum range was 3,150 m. Prototype 2 is up to 28.3% lighter than an equivalent size electric PMD and can be fully recharged in approximately 2 minutes. It decreases the cost of PMDs by approximately $1,500, because batteries do not need to be replaced over the lifetime of the device. The results provide justification for the use of pneumatic technology in PMDs. PMID:29339888

Integration of Pneumatic Technology in Powered Mobility Devices.

PubMed

Daveler, Brandon; Wang, Hongwu; Gebrosky, Benjamin; Grindle, Garrett G; Schneider, Urs; Cooper, Rory A

2017-01-01

Advances in electric motors, electronics, and control systems have enhanced the capability and drivability of electric power mobility devices over the last 60 years. Yet, battery technologies used in powered mobility devices (PMDs) have not kept pace. Recent advances in pneumatic technology, primarily the high torque, low speed design of rotary piston air motors, directly align with the needs of PMD. Pneumatic technology has advantages over battery-powered technology, including lighter weight, lower operating costs, decreased environmental impact, better reliability, and increased safety. Two prototypes were created that incorporated rotary piston air motors, high-pressure air tanks, and air-pressure regulators. Prototype 1 was created by modifying an existing electric PMD. Range tests were performed to determine the feasibility of pneumatic technology and the optimal combination of components to allow the longest range possible at acceptable speeds over ideal conditions. Using a 1.44 L air tank for feasibility testing, prototype 1 was capable of traveling 800 m, which confirmed the feasibility of pneumatic technology usage in PMDs. Prototype 2 was designed based on the testing results from prototype 1. After further optimization of prototype 2, the average maximum range was 3,150 m. Prototype 2 is up to 28.3% lighter than an equivalent size electric PMD and can be fully recharged in approximately 2 minutes. It decreases the cost of PMDs by approximately $1,500, because batteries do not need to be replaced over the lifetime of the device. The results provide justification for the use of pneumatic technology in PMDs.

EPA New England Opens Nomination Period for Annual Environmental Merit Awards

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency office in New England is accepting nominations for New England people, organizations, government entities or businesses whose environmental achievements during the past year deserve recognition.

Meanings and implications of acceptability judgements for wilderness use impacts

Treesearch

Amy F. Hoss; Mark W. Brunson

2000-01-01

While the concept of “acceptability” is central to the Limits of Acceptable Change (LAC) framework, there is inadequate understanding of how “acceptability” is judged and how unacceptable conditions affect visitor experiences. To address this knowledge gap, visitors to nine wilderness areas were interviewed. Judgments of social and environmental conditions fell into...

Engineering in an age of anxiety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weinberg, A.M.

Public fears of nuclear or chemical accidents should challenge engineers to build systems that are inherently safe. Much of our national anxiety focuses on modern technology. This anxiety places constraints on our technologies. Probabilistic risk assessment (PBA) has become an accepted tool for determining the safety of a device. Although PBA is widely accepted by engineers, it will not allay the public's anxieties. To concede that a technology has the potential for causing a major disaster, even if the probability of occurrence is minute, is unacceptable in the age of anxiety. The search for inherent safety concepts, that - informedmore » skeptics - and the public will accept, continues. The greenhouse effect may be decisive in spurring the demand for inherently safe nuclear technology. Ultimately what the public requires by way of assurance may well depend on the alternatives available. 11 refs.« less

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, TNT DETECTION TECHNOLOGY, TEXAS INSTRUMENTS, SPREETA TM SENSOR

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, CLEAN ENVIRONMENT EQUIPMENT, SAMPLEASE BLADDER PUMP

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

Environmental Technology Verification Report - NATCO Group, Inc. – Paques THIOPAQ Gas Purification Technology

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

78 FR 21911 - Environmental Technologies Trade Advisory Committee Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-12

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The meeting is... review the role of the U.S. government in supporting the early adoption of environmental technologies and...

Multimodal activity monitoring for home rehabilitation of geriatric fracture patients--feasibility and acceptance of sensor systems in the GAL-NATARS study.

PubMed

Marschollek, Michael; Becker, Marcus; Bauer, Jürgen M; Bente, Petra; Dasenbrock, Lena; Elbers, Katharina; Hein, Andreas; Kolb, Gerald; Künemund, Harald; Lammel-Polchau, Christopher; Meis, Markus; Meyer Zu Schwabedissen, Hubertus; Remmers, Hartmut; Schulze, Mareike; Steen, Enno-Edzard; Thoben, Wilfried; Wang, Ju; Wolf, Klaus-Hendrik; Haux, Reinhold

2014-01-01

Demographic change will lead to a diminishing care workforce faced with rising numbers of older persons in need of care, suggesting meaningful use of health-enabling technologies, and home monitoring in particular, to contribute to supporting both the carers and the persons in need. We present and discuss the GAL-NATARS study design along with first results regarding technical feasibility of long-term home monitoring and acceptance of different sensor modalities. Fourteen geriatric participants with mobility-impairing fractures were recruited in three geriatric clinics. Following inpatient geriatric rehabilitation, their homes were equipped with ambient sensor components for three months. Additionally, a wearable accelerometer was employed. Technical feasibility was assessed by system and component downtimes, technology acceptance by face-to-face interviews. The overall system downtime was 6%, effected by two single events, but not by software failures. Technology acceptance was rated very high by all participants at the end of the monitoring periods, and no interference with their social lives was reported. Home-monitoring technologies were well-accepted by our participants. The information content of the data still needs to be evaluated with regard to clinical outcome parameters as well as the effect on the quality of life before recommending large-scale implementations.

A Systematic and Integrated Review of Mobile-Based Technology to Promote Active Lifestyles in People With Type 2 Diabetes.

PubMed

McMillan, Kathryn Anne; Kirk, Alison; Hewitt, Allan; MacRury, Sandra

2017-03-01

The aim was to review studies examining the effectiveness, acceptability, and feasibility of mobile-based technology for promoting active lifestyles in people with type 2 diabetes (T2D). Benefits of leading an active lifestyle following a diagnosis of T2D, including improved glycemic control, have been reported. Studies examining the specific use of mobile-based technologies to promote an active lifestyle in T2D have not previously been reviewed. Research studies examining effectiveness, feasibility or acceptability of mobile-based technology for active lifestyle promotion for T2D management were included (n = 9). The databases searched included PubMed, Medline, ScienceDirect, and ACM Digital Library (January 2005 to October 2015). Studies were categorized as (1) informing, (2) monitoring, (3) provoking, or (4) sustaining behavior change. Technologies used included smartphone or tablet apps, diabetes personal digital assistant, continuous glucose monitor and accelerometer, pedometer, and a website delivered by a smartphone. No articles examined the effectiveness of mobile-based technology in monitoring health behaviors and behavior change. Four of the studies found mobile-based technology to be motivational and supportive for behavior change. The visual reinforcement was identified as motivational. The feasibility and acceptability of using mobile-based technology to provide sustained lifestyle change and the effectiveness of mobile-based technology in monitoring health behaviors and behavior change have not been investigated. No studies examined all 3 of the outcomes or focused decreasing the participants' sedentary behavior. Limited research has examined the feasibility, acceptability, and effectiveness of mobile-based technology to promote active lifestyles and subsequently good diabetes management in people with T2D.

Barriers to physicians' adoption of healthcare information technology: an empirical study on multiple hospitals.

PubMed

Lin, Chihung; Lin, I-Chun; Roan, Jinsheng

2012-06-01

Prior research on technology usage had largely overlooked the issue of user resistance or barriers to technology acceptance. Prior research on the Electronic Medical Records had largely focused on technical issues but rarely on managerial issues. Such oversight prevented a better understanding of users' resistance to new technologies and the antecedents of technology rejection. Incorporating the enablers and the inhibitors of technology usage intention, this study explores physicians' reactions towards the electronic medical record. The main focus is on the barriers, perceived threat and perceived inequity. 115 physicians from 6 hospitals participated in the questionnaire survey. Structural Equation Modeling was employed to verify the measurement scale and research hypotheses. According to the results, perceived threat shows a direct and negative effect on perceived usefulness and behavioral intentions, as well as an indirect effect on behavioral intentions via perceived usefulness. Perceived inequity reveals a direct and positive effect on perceived threat, and it also shows a direct and negative effect on perceived usefulness. Besides, perceived inequity reveals an indirect effect on behavioral intentions via perceived usefulness with perceived threat as the inhibitor. The research finding presents a better insight into physicians' rejection and the antecedents of such outcome. For the healthcare industry understanding the factors contributing to physicians' technology acceptance is important as to ensure a smooth implementation of any new technology. The results of this study can also provide change managers reference to a smooth IT introduction into an organization. In addition, our proposed measurement scale can be applied as a diagnostic tool for them to better understand the status quo within their organizations and users' reactions to technology acceptance. By doing so, barriers to physicians' acceptance can be identified earlier and more effectively before leading to technology rejection.

How Teachers' Personality Affect on Their Behavioral Intention to Use Tablet PC

ERIC Educational Resources Information Center

Camadan, Fatih; Reisoglu, Ilknur; Ursavas, Ömer Faruk; Mcilroy, David

2018-01-01

Purpose: The purpose of this paper is to explore the effects of personality traits on teachers' technology acceptance. Design/methodology/approach To this end, a demographic information survey, Five-Factor inventory, and technology acceptance measure were used for data collection. The data were analyzed via structural equation modeling. Findings:…

Wiki Acceptance by University Students to Improve Collaboration in Higher Education

ERIC Educational Resources Information Center

Cilliers, Liezel

2017-01-01

Web 2.0 technologies, such as wikis, can play a key role in promoting interaction, delivering education and providing communication between students. However, most of the existing literature does not seem to consider relationships between designing wiki-based learning activities and the student acceptance of this technology. The purpose of the…

Mobile Libraries: Librarians' and Students' Perspectives

ERIC Educational Resources Information Center

Aharony, Noa

2014-01-01

This study which is based on the Technological Acceptance Model (TAM), seeks to explore whether librarians and LIS students are familiar with the newest technological innovations and whether they are ready to accept them. The research was conducted in Israel during the first and second semesters of the 2012 academic year and considered two…

Variables Predicting Prospective Biology Teachers' Acceptance Perceptions Regarding Gene Technology

ERIC Educational Resources Information Center

Yilmaz, Mirac; Demirhan, Haydar

2014-01-01

The different opinions on products and applications of gene technology (GT) draw attention to the training and education activities related to GT. The purpose of this study is to review some variables predicting the acceptance perception regarding GT, and to investigate their changes at levels. The prospective teachers' subjective knowledge and…

Framing Innovation: The Role of Distributed Leadership in Gaining Acceptance of Large-Scale Technology Initiatives

ERIC Educational Resources Information Center

Turner, Henry J.

2014-01-01

This dissertation of practice utilized a multiple case-study approach to examine distributed leadership within five school districts that were attempting to gain acceptance of a large-scale 1:1 technology initiative. Using frame theory and distributed leadership theory as theoretical frameworks, this study interviewed each district's…

Learning Computerese: The Role of Second Language Learning Aptitude in Technology Acceptance

ERIC Educational Resources Information Center

Warner, Janis A.; Koufteros, Xenophon; Verghese, Anto

2014-01-01

This article introduces a new construct coined as Computer User Learning Aptitude (CULA). To establish construct validity, CULA is embedded in a nomological network that extends the technology acceptance model (TAM). Specifically, CULA is posited to affect perceived usefulness and perceived ease of use, the two underlying TAM constructs.…

A Causal Model of Teacher Acceptance of Technology

ERIC Educational Resources Information Center

Chang, Jui-Ling; Lieu, Pang-Tien; Liang, Jung-Hui; Liu, Hsiang-Te; Wong, Seng-lee

2012-01-01

This study proposes a causal model for investigating teacher acceptance of technology. We received 258 effective replies from teachers at public and private universities in Taiwan. A questionnaire survey was utilized to test the proposed model. The Lisrel was applied to test the proposed hypotheses. The result shows that computer self-efficacy has…

Using the UTAUT Model to Analyze Students' ICT Adoption

ERIC Educational Resources Information Center

Attuquayefio, Samuel NiiBoi; Addo, Hillar

2014-01-01

This paper seeks to provide further understanding of issues surrounding acceptance of information and communication technology (ICT) by students of tertiary institutions. The Unified Theory of Acceptance and Use of Technology (UTAUT) model Venkatesh et al (2003) was employed by the researchers to determine the strength of predictors for students'…

Acceptance Factors Influencing Adoption of National Institute of Standards and Technology Information Security Standards: A Quantitative Study

ERIC Educational Resources Information Center

Kiriakou, Charles M.

2012-01-01

Adoption of a comprehensive information security governance model and security controls is the best option organizations may have to protect their information assets and comply with regulatory requirements. Understanding acceptance factors of the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) comprehensive…

Multiple Stakeholder Perspectives on Teletherapy Delivery of Speech Pathology Services in Rural Schools: A Preliminary, Qualitative Investigation

PubMed Central

LINCOLN, MICHELLE; HINES, MONIQUE; FAIRWEATHER, CRAIG; RAMSDEN, ROBYN; MARTINOVICH, JULIA

2015-01-01

The objective of this study was to investigate stakeholders’ views on the feasibility and acceptability of a pilot speech pathology teletherapy program for children attending schools in rural New South Wales, Australia. Nine children received speech pathology sessions delivered via Adobe Connect® web-conferencing software. During semi-structured interviews, school principals (n = 3), therapy facilitators (n = 7), and parents (n = 6) described factors that promoted or threatened the program’s feasibility and acceptability. Themes were categorized according to whether they related to (a) the use of technology; (b) the school-based nature of the program; or (c) the combination of using technology with a school-based program. Despite frequent reports of difficulties with technology, teletherapy delivery of speech pathology services in schools was highly acceptable to stakeholders. However, the use of technology within a school environment increased the complexities of service delivery. Service providers should pay careful attention to planning processes and lines of communication in order to promote efficiency and acceptability of teletherapy programs. PMID:25945230

Analysis of the acceptance of autonomous planetary science data collection by field of inquiry

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2015-06-01

The acceptance of autonomous control technologies in planetary science has met significant resistance. Many within this scientific community question the efficacy of autonomous technologies for making decisions regarding what data to collect, how to process it and its processing. These technologies, however, can be used to significantly increase the scientific return on mission investment by removing limitations imposed by communications bandwidth constraints and communications and human decision making delays. A fully autonomous mission, in an ideal case, could be deployed, perform most of the substantive work itself (possibly relying on human assistance for dealing with any unexpected or unexplained occurrences) and return an answer to a scientific question along with data selected to allow scientists to validate software performance. This paper presents the results of a survey of planetary scientists which attempts to identify the root causes of the impediments to the use of this type of technology and identify pathways to its acceptance. Previous work considered planetary science as a single large community. This paper contrasts the differences in acceptance between component fields of planetary science.

User Acceptance of Picture Archiving and Communication System in the Emergency Department

PubMed Central

Goodarzi, Hassan; Khatami, Seyed-Masoud; Javadzadeh, Hammidreza; Mahmoudi, Sadrollah; Khajehpour, Hojjatollah; Heidari, Soleiman; Khodaparast, Morteza; Ebrahimi, Ali; Rasouli, Hamidreza; Ghane, Mohammadreza; Faraji, Mehrdad; Hassanpour, Kasra

2016-01-01

Background Picture archiving and communication system (PACS) has allowed the medical images to be transmitted, stored, retrieved, and displayed in different locations of a hospital or health system. Using PACS in the emergency department will eventually result in improved efficiency and patient care. In spite of the abundant benefits of employing PACS, there are some challenges in implementing this technology like users’ resistance to accept the technology, which has a critical role in PACS success. Objectives In this study, we will assess and compare user acceptance of PACS in the emergency departments of three different hospitals and investigate the effect of socio-demographic factors on this acceptance. Materials and Methods A variant of technology acceptance model (TAM) has been used in order to measure the acceptance level of PACS in the emergency department of three educational hospitals in Iran. A previously used questionnaire was validated and utilized to collect the study data. A stepwise multiple regression model was used to predict factors influencing acceptance score as the dependent variable. Results Mean age of participants was 32.9 years (standard deviation [SD] = 6.08). Participants with the specialty degree got a higher acceptance score than the three other groups (Mean ± SD = 4.17 ± 0.20). Age, gender, degree of PACS usage and participant’s occupation (profession) did not influence the acceptance score. In our multiple regression model, all three variables of perceived usefulness (PU), perceived ease of use (PEU) and the effect of PACS (change) had a significant effect in the prediction of acceptance. The most influencing factor was change with the beta of 0.22 (P value < 0.001). Conclusion PACS is highly accepted in all three emergency departments especially among specialists. PU, PEU and change are factors influencing PACS acceptance. Our study can be used as an evidence of PACS acceptance in emergency wards. PMID:27679692

Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

NASA Astrophysics Data System (ADS)

Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS--DONALDSON COMPANY, INC. 6277 FILTRATION MEDIA

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through high quality, peer reviewed data on technology performance to those involved in the des...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOLOG, INC., MICRO-FLO BLADDER PUMP MODEL 57400

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program...

U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA), ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGAM: RESIDENTIAL NUTRIENT REDUCTION

EPA Science Inventory

The U.S. Environmental Protection Agency Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This technology ...

U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA) ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: ARSENIC TREATMENT TECHNOLOGIES

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techn...

77 FR 50987 - Environmental Technologies Trade Advisory Committee, Request for Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... of the ETTAC shall be drawn from U.S. environmental technologies manufacturing and services companies... be senior executive-level representatives from U.S. environmental technology companies, trade... environmental technologies products and services; (5) Short biography of nominee, including information...

77 FR 14734 - Environmental Technologies Trade Advisory Committee Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-13

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... proposed agenda of a meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The... innovation in the environmental technology sector. Background: The ETTAC is mandated by Public Law 103-392...

Influences of geo-spatial location on pre-exposure prophylaxis use in South Africa: positioning microbicides for better product uptake.

PubMed

Govender, Eliza M; Mansoor, Leila E; Abdool Karim, Quarraisha

2017-06-01

Young women bear a disproportionately high burden of HIV infection in sub-Saharan Africa, prioritising pre-exposure prophylaxis (PrEP) can be an integral part of HIV prevention combination strategies. Women initiated HIV prevention technology options will require consistent adherence, an imperative for product effectiveness. With several PrEP clinical trials underway; exploring women's acceptability to advances in HIV prevention technologies can better facilitate demand creation for future PrEP roll out. This study utilised the opportunity of post-trial access to CAPRISA 008 women (trial) and non-trial women from three geo-spatial settings (urban, rural and peri-urban) to identify microbicide acceptability and how product associations of microbicides can influence future HIV prevention choices. Six participatory workshops using participatory action research with art-based activities and discussion groups were conducted in KwaZulu-Natal with 104 women from various geo-spatial locations and social status to understand microbicide acceptability and product associations. The data were analysed using thematic analysis. The study found that women's acceptability and product association of the tenofovir gel microbicide differed according to rural and urban areas. Most urban women identified confidence, sexiness and classiness as key associations that will encourage microbicide acceptability and use, while rural women identified respect, responsibility and confidence as the key product associations, with increased focus on the individual and collective family/community benefits of product acceptance and use. Urban-rural differences suggest a market segmentation that is contextualised to be locally responsive to promote HIV prevention technologies. Various sexual encounters further determined the types of HIV prevention technologies women would consider. In line with WHO's recommendation that PrEP should be an additional prevention choice for people at risk of HIV, this study underscores the importance of user engagement, understanding product associations and how this can influence product acceptability and promotion of HIV prevention technologies.

News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers

NASA Astrophysics Data System (ADS)

Anton, J. M.; Sanchez, M. E.; Grau, J. B.; Andina, D.

2012-04-01

The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, "project of end of career", Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.

Polymer recycling: potential application of radiation technology

NASA Astrophysics Data System (ADS)

Burillo, Guillermina; Clough, Roger L.; Czvikovszky, Tibor; Guven, Olgun; Le Moel, Alain; Liu, Weiwei; Singh, Ajit; Yang, Jingtian; Zaharescu, Traian

2002-04-01

Management of solid waste is an important problem, which is becoming progressively worse as a byproduct of continuing economic growth and development. Polymeric materials (plastics and rubbers) comprise a steadily increasing proportion of the municipal and industrial waste going into landfill. Development of technologies for reducing polymeric waste, which are acceptable from the environmental standpoint, and which are cost-effective, has proven to be a difficult challenge due to complexities inherent in the reuse of polymers. Establishing optimal processes for the reuse/recycling of polymeric materials thus remains a worldwide challenge as we enter the new century. Due to the ability of ionizing radiation to alter the structure and properties of bulk polymeric materials, and the fact that it is applicable to essentially all polymer types, irradiation holds promise for impacting the polymer waste problem. The three main possibilities for use of radiation in this application are: (1) enhancing the mechanical properties and performance of recovered materials or material blends, principally through crosslinking, or through surface modification of different phases being combined; (2) treatment causing or enhancing the decomposition of polymers, particularly through chain scission, leading to recovery of either low molecular weight mixtures, or powders, for use as chemical feedstocks or additives; (3) production of advanced polymeric materials designed for environmental compatibility. This paper provides an overview of the polymer recycling problem, describes the major technological obstacles to the implementation of recycling technologies, and outlines some of the approaches being taken. A review of radiation-based recycling research is then provided, followed by a discussion of future directions where irradiation may be relevant to the problems currently inhibiting the widespread recycling of polymeric materials.

Review of evolving trends in blended wing body aircraft design

NASA Astrophysics Data System (ADS)

Okonkwo, Paul; Smith, Howard

2016-04-01

The desire to produce environmentally friendly aircraft that is aerodynamically efficient and capable of conveying large number of passengers over long ranges at reduced direct operating cost led aircraft designers to develop the Blended Wing Body (BWB) aircraft concept. The BWB aircraft represents a paradigm shift in the design of aircraft. The design provides aerodynamics and environmental benefits and is suitable for the integration of advanced systems and concepts like laminar flow technology, jet flaps and distributed propulsion. However, despite these benefits, the BWB is yet to be developed for commercial air transport due to several challenges. This paper reviews emerging trends in BWB aircraft design highlighting design challenges that have hindered the development of a BWB passenger transport aircraft. The study finds that in order to harness the advantages and reduce the deficiencies of a tightly coupled configuration like the BWB, a multidisciplinary design synthesis optimisation should be conducted with good handling and ride quality as objective functions within acceptable direct operating cost and noise bounds.

The role of Environmental Health System air quality monitors in Space Station Contingency Operations

NASA Technical Reports Server (NTRS)

Limero, Thomas F.; Wilson, Steve; Perlot, Susan; James, John

1992-01-01

This paper describes the Space Station Freedom (SSF) Environmental Health System's air-quality monitoring strategy and instrumentation. A two-tier system has been developed, consisting of first-alert instruments that warn the crew of airborne contamination and a volatile organic analyzer that can identify volatile organic contaminants in near-real time. The strategy for air quality monitoring on SSF is designed to provide early detection so that the contamination can be confined to one module and so that crew health and safety can be protected throughout the contingency event. The use of air-quality monitors in fixed and portable modes will be presented as a means of following the progress of decontamination efforts and ensuring acceptable air quality in a module after an incident. The technology of each instrument will be reviewed briefly; the main focus of this paper, however, will be the use of air-quality monitors before, during, and after contingency incidents.

Prototype Aerogel Insulation for Melamine-Foam Substitute: Critical Space Station Express Rack Technology

NASA Technical Reports Server (NTRS)

Noever, David A.; Sibille, Laurent; Smith, David; Cronise, Raymond

1998-01-01

There is a current lack of environmentally acceptable foams to insulate Long-Duration Human Spaceflight Missions, including the experimental Express Rack for the Space Station. A recent 60-day manned test in a sealed chamber at Johnson Space Center (JSC) was nearly aborted, because of persistently high formaldehyde concentrations in the chamber. Subsequent investigation showed that the source was melamine foam (used extensively for acoustic insulation). The thermal and acoustic potential for melamine-foam substitutes is evaluated for scale-up to a silica-based foam and aerogel, which is environmentally benign for long duration space flight. These features will be discussed in reference to an aerogel prototype to: 1) assemble material strength data for various formulated aerogels, both silica and organic carbon aerogels; 2) assemble the aerogel into panels of mylar/vacuum-encapsulated rigid boards which can be molded in various shapes and rigidities; and 3) describe a process for space applications for formaldehyde-free, long duration thermal and acoustic insulators.

Helium-3 inventory of lunar samples: A potential future energy resource for mankind?

NASA Technical Reports Server (NTRS)

Murali, A. V.; Jordan, J. L.

1993-01-01

Recent public concern over the safety, cost, and environmental impact of the worldwide fission reactors has focused the attention of scientists and engineers towards perfecting fusion technology because it promises a much more environmentally acceptable 'clean' energy supply. The fusion reaction D-2 + He-3 yields p(14.7 MeV) + He-4(3.6 MeV) has long been recognized as an ideal candidate for producing commercially 'safer and cleaner' fusion power. Naturally occurring He-3 is scarce on earth; however, lunar regolith is a potential ore for He-3 because the high He-3 in solar wind has been implanted in the lunar regolith for more than 4 x 10(exp 9) years, along with other volatile species. The helium abundance in lunar soils is dependent not only on the maturity of soils (I(sub S)/FeO) but also on their mineralogy. The titanium-rich (ilmenite) lunar soils are important repositories for volatiles, which may be released by heating these soils up to approximately 700 C.

Usability and acceptability of technology for community-dwelling older adults with mild cognitive impairment and dementia: a systematic literature review

PubMed Central

Holthe, Torhild; Halvorsrud, Liv; Karterud, Dag; Hoel, Kari-Anne; Lund, Anne

2018-01-01

Background The objective of this review was to obtain an overview of the technologies that have been explored with older adults with mild cognitive impairment and dementia (MCI/D), current knowledge on the usability and acceptability of such technologies, and how people with MCI/D and their family carers (FCs) were involved in these studies. Materials and methods Primary studies published between 2007 and 2017 that explored the use of technologies for community-dwelling people with MCI/D were identified through five databases: MEDLINE, PsycINFO, Embase, AMED, and CINAHL. Twenty-nine out of 359 papers met the criteria for eligibility. We used the Mixed Methods Appraisal Tool for quality assessment. Results A wide range of technologies was presented in the 29 studies, sorted into four domains: 1) safe walking indoors and outdoors; 2) safe living; 3) independent living; and 4) entertainment and social communication. The current state of knowledge regarding usability and acceptability reveals that even if researchers are aware of these concepts and intend to measure usability and acceptability, they seem difficult to assess. Terms such as “user friendliness” and “acceptance” were used frequently. User participation in the 29 studies was high. Persons with MCI/D, FCs, and staff/other older adults were involved in focus groups, workshops, and interviews as part of the preimplementation process. Conclusion Research regarding technologies to support people with MCI/D seems optimistic, and a wide range of technologies has been evaluated in homes with people with MCI/D and their FCs. A major finding was the importance of including people with MCI/D and their FCs in research, in order to learn about required design features to enhance usability and acceptability. Surprisingly, very few studies reported on the consequences of technology use with regard to quality of life, occupational performance, or human dignity. PMID:29765211

ENVIRONMENTAL TECHNOLOGY VERIFICATION FOR AIR POLLUTION CONTROL TECHNOLOGIES: FINAL REPORT

EPA Science Inventory

The technical objective of the Environmental Technology Verification (ETV) Program's Air Pollution Control Technology (APCT) Center is to verify environmental technology performance by obtaining objective quality-assured data, thus providing potential purchasers and permitters wi...

Are We Meeting the Goal of Responsible Environmental Behavior: An Examination of Nature and Environmental Education Center Goals.

ERIC Educational Resources Information Center

Simmons, Deborah A.

1991-01-01

Through two surveys of nature and environmental centers throughout the United States, the author compares the centers' expressed goals with the goals of environmental education. These goals were determined by an accepted behavior model that is considered conducive to environmentally responsible behavior. (17 references) (MCO)

Assessing the Moderating Effect of the End User in Consumer Behavior: The Acceptance of Technological Implants to Increase Innate Human Capacities

PubMed Central

Pelegrín-Borondo, Jorge; Reinares-Lara, Eva; Olarte-Pascual, Cristina; Garcia-Sierra, Marta

2016-01-01

Today, technological implants are being developed to increase innate human capacities, such as memory or calculation speed, and to endow us with new ones, such as the remote control of machines. This study's aim was two-fold: first, to introduce a Cognitive-Affective-Normative (CAN) model of technology acceptance to explain the intention to use this technology in the field of consumer behavior; and second, to analyze the differences in the intention to use it based on whether the intended implant recipient is oneself or one's child (i.e., the moderating effect of the end user). A multi-group analysis was performed to compare the results between the two groups: implant “for me” (Group 1) and implant “for my child” (Group 2). The model largely explains the intention to use the insideable technology for the specified groups [variance explained (R2) of over 0.70 in both cases]. The most important variables were found to be “positive emotions” and (positive) “subjective norm.” This underscores the need to broaden the range of factors considered to be decisive in technology acceptance to include variables related to consumers' emotions. Moreover, statistically significant differences were found between the “for me” and “for my child” models for “perceived ease of use (PEU)” and “subjective norm.” These findings confirm the moderating effect of the end user on new insideable technology acceptance. PMID:26941662

77 FR 2719 - National Advisory Council for Environmental Policy and Technology; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

... and Technology; Meeting AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Advisory... a public meeting of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology...

77 FR 39705 - National Advisory Council for Environmental Policy and Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Advisory Committee... meeting of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management...

77 FR 75997 - Environmental Technologies Trade Advisory Committee (ETTAC), Request for Nominations from U.S...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... Environmental Technologies Trade Advisory Committee (ETTAC). SUMMARY: This notice sets forth a request for... serve on the Environmental Technologies Trade Advisory Committee (ETTAC). One person will be appointed...

77 FR 8859 - National Advisory Council for Environmental Policy and Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Cancellation and Rescheduling of National Advisory Council for Environmental Policy and Technology (NACEPT) Committee Meeting. SUMMARY: EPA... Environmental Policy and Technology (NACEPT) Meeting to be held at the EPA Potomac Yard Conference Center, One...