Impact of different rectangular wires on torsional expression of different sizes of buccal tube

PubMed Central

Boroujeni, Afshar-Rasti

2018-01-01

Background Torsions in rectangular wires are the essential part of corrections in the finishing stage of treatment. Moreover the greatest amounts of torques are applied in the molar areas. a clinically effective moment is between 5 and 20 Nmm. In this study we have decided to evaluate the impact of different tube sizes and different dimensions of wires with different modulus of elasticities on the amount torsional bond strength of molar tubes. Material and Methods 60 human impacted molar teeth were collected. A buccal tube was bonded on the buccal surface of all the samples by using light cured adhesive resin. After that, the teeth were mounted in a hard acrylic block. According to the size of buccal tube and the rectangular wires to be tested 4 groups will be designed. Torsional force was applied by instron machine. The torque angle at 5Nmm and at 20Nmm point will be calculated: which means, how many degrees of torque is required to reach the maximum 20Nmm moment from the minimum 5Nmm.One-way ANOVA was used to compare torque angle in all of the groups. Results The least amount of clinically significant angle was 2.2 ᵒ in the 0.017×0.025 SS and the largest amount of it was 23.7 ᵒ in the 0.017×0.025 TMA in 0.018×0.025 slot molar tube. But, this angle was 19.9 ᵒand 13.6 ᵒ in 0.019×0.025 SS and 0.019×0.025 TMA archwire in 0.022×0.028 molar tube. Conclusions The 0.017×0.025 SS archwire in 0.018×0.025 molar tube had the lowest clinically significant angle. The largest amount was seen in group 0.017×0.025 TMA in 0.018×0.025 slot molar tube. Key words: Torsional efficacy, rectangular wires, buccal tubes, torque angle. PMID:29670712

Assessing the Amount of Interdental Bone in Posterior Areas of the Mandible for Placing Orthodontic Mini-Implants

PubMed Central

Esfahanizadeh, Nasrin; Shahraki, Damoun; Daneshparvar, Hamidreza; Talaei Pour, Ahmad Reza; Saghiri, Mohammad Ali; Sheibaninia, Ahmad; Rashtak, Shadab

2013-01-01

Objective : The aim of this study was to assess the amount of interdental bone in posterior areas of the mandible for placing orthodontic mini-implants to provide and control anchorage in orthodontic treatment. Materials and Methods : The amount of interdental bone in areas between the second premolars and first molars, first and second molars on the right and left sides of the mandible were determined in fifty patients by RVG using periapical radiographs. The images were assessed using Cygnus Media Software to determine the mesio-distal width of the interdental bone, starting at the crest of the alveolar bone (2 mm below the CEJ) every one millimeter up to 12 mm from the CEJ. The actual amount of interdental bone and the effect of related factors were assessed using chi-square test at a 95% confidence interval. Results : The minimum desired interdental bone width for placing mini-implants, 3 mm from the CEJ, between the second premolar and first molar and the first and second molars of the mandible on both sides were significantly different (p<0.01): 1.8 mm (31%) more apical in the area between the second premolar and the first molar. There was also a statistically significant difference between the areas under study on the right side (p<0.002), which was 2.2 mm (44%) more apical in the area of the second premolar and the first molar. Conclusion : The most secure site for placing orthodontic mini-implants in the mandible is between the first and second molars at the height of 5.8 mm from the CEJ. PMID:25512751

Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

PubMed Central

Sodagar, A.; Ahmad Akhoundi, M. S.; Rafighii, A.; Arab, S.

2011-01-01

Objective Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD) which is a simple molar distalizing appliance. Materials and Methods Sixteen patients (12 girls, four boys) with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. The screws were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance. Results Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was 0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH) decreased 1.28±1.36 mm. Conclusion BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance. PMID:22457837

Abrasive, Silica Phytoliths and the Evolution of Thick Molar Enamel in Primates, with Implications for the Diet of Paranthropus boisei

PubMed Central

Rabenold, Diana; Pearson, Osbjorn M.

2011-01-01

Background Primates—including fossil species of apes and hominins—show variation in their degree of molar enamel thickness, a trait long thought to reflect a diet of hard or tough foods. The early hominins demonstrated molar enamel thickness of moderate to extreme degrees, which suggested to most researchers that they ate hard foods obtained on or near the ground, such as nuts, seeds, tubers, and roots. We propose an alternative hypothesis—that the amount of phytoliths in foods correlates with the evolution of thick molar enamel in primates, although this effect is constrained by a species' degree of folivory. Methodology/Principal Findings From a combination of dietary data and evidence for the levels of phytoliths in plant families in the literature, we calculated the percentage of plant foods rich in phytoliths in the diets of twelve extant primates with wide variation in their molar enamel thickness. Additional dietary data from the literature provided the percentage of each primate's diet made up of plants and of leaves. A statistical analysis of these variables showed that the amount of abrasive silica phytoliths in the diets of our sample primates correlated positively with the thickness of their molar enamel, constrained by the amount of leaves in their diet (R2 = 0.875; p<.0006). Conclusions/Significance The need to resist abrasion from phytoliths appears to be a key selective force behind the evolution of thick molar enamel in primates. The extreme molar enamel thickness of the teeth of the East African hominin Paranthropus boisei, long thought to suggest a diet comprising predominantly hard objects, instead appears to indicate a diet with plants high in abrasive silica phytoliths. PMID:22163299

Optimized synthesis of lipase-catalyzed hexyl acetate in n-hexane by response surface methodology.

PubMed

Shieh, C J; Chang, S W

2001-03-01

Hexyl acetate, a short-chain ester with fruity odor, is a significant green note flavor compound and widely used in the food industry. The ability for immobilized lipase from Mucor miehei (Lipozyme IM-77) to catalyze the transesterification of hexanol with triacetin was investigated in this study. Response surface methodology and five-level-five-factor central composite rotatable design were adopted to evaluate the effects of synthesis variables, such as reaction time (2-10 h), temperature (25-65 degrees C), enzyme amount (10-50%; 0.024-0.118 BAUN), substrate molar ratio of triacetin to hexanol (1:1 to 3:1), and added water content (0-20%) on percentage molar conversion of hexyl acetate. The results showed that reaction temperature and substrate molar ratio were the most important parameters and that added water content had less of an effect on percent molar conversion. On the basis of canonical analysis, optimum synthesis conditions were as follows: reaction time, 7.7 h; temperature, 52.6 degrees C; enzyme amount, 37.1% (0.089 BAUN); substrate molar ratio, 2.7:1; and added water, 12.5%. The predicted value was 88.9% molar conversion, and the actual experimental value was 86.6% molar conversion.

Comparison of the remaining dentin thickness in the root after hand and four rotary instrumentation techniques: an in vitro study.

PubMed

Rao, M S Rama; Shameem, Abdul; Nair, Rashmi; Ghanta, Sureshbabu; Thankachan, Rekha P; Issac, Johnson K

2013-07-01

The aim of the present study was to compare the remaining dental thickness (RDT) in the mesiobuccal root of mandibular first molars at 3 and 7 mm from the anatomic apex after instrumentation with ProTaper, light speed LSX, K3 and M2 and to compare with that of K-files. In this study, 60 extracted, untreated human mandibular first molars with fully formed apices, with curvature less than 35° and no root resorption were used. Prepared specimens were cut horizontally at 3 and 7 mm short of anatomic apex. The least dentin thickness from canal to external root surface was observed under 3× magnification and recorded using Clemax measuring tool and the sections were reassembled. Group I-instrumentation with ProTaper, group II-instrumentation with K3, group III-instrumentation with Light Speed LSX, group IV-instrumentation with M2 and group V- instrumentation with K-files and RDT was measured. Results showed that group V removed lesser amount of dentin compared to all other groups while all the three instrumentation techniques removed almost equal amount of dentin apically. Cleaning and shaping of the root canal space involves the elimination of pathogenic contents as well as attaining a uniform specific shape. However, the RDT following the use of various intraradicular procedures is an important factor to be considered as an iatrogenic cause that may result in root fracture. To avoid this, newer rotary instruments are being introduced.

Dental wear, wear rate, and dental disease in the African apes.

PubMed

Elgart, Alison A

2010-06-01

The African apes possess thinner enamel than do other hominoids, and a certain amount of dentin exposure may be advantageous in the processing of tough diets eaten by Gorilla. Dental wear (attrition plus abrasion) that erodes the enamel exposes the underlying dentin and creates additional cutting edges at the dentin-enamel junction. Hypothetically, efficiency of food processing increases with junction formation until an optimal amount is reached, but excessive wear hinders efficient food processing and may lead to sickness, reduced fecundity, and death. Occlusal surfaces of molars and incisors in three populations each of Gorilla and Pan were videotaped and digitized. The quantity of incisal and molar occlusal dental wear and the lengths of dentin-enamel junctions were measured in 220 adult and 31 juvenile gorilla and chimpanzee skulls. Rates of dental wear were calculated in juveniles by scoring the degree of wear between adjacent molars M1 and M2. Differences were compared by principal (major) axis analysis. ANOVAs compared means of wear amounts. Pearson correlation coefficients were calculated to compare the relationship between molar wear and incidence of dental disease. Results indicate that quantities of wear are significantly greater in permanent incisors and molars and juvenile molars of gorillas compared to chimpanzees. The lengths of dentin-enamel junctions were predominantly suboptimal. Western lowland gorillas have the highest quantities of wear and the most molars with suboptimal wear. The highest rates of wear are seen in Pan paniscus and Pan t. troglodytes, and the lowest rates are found in P.t. schweinfurthii and G. g. graueri. Among gorillas, G. b. beringei have the highest rates but low amounts of wear. Coefficients between wear and dental disease were low, but significant when all teeth were combined. Gorilla teeth are durable, and wear does not lead to mechanical senescence in this sample.

Molar incisor hypomineralization: proportion and severity in primary public school children in Graz, Austria.

PubMed

Buchgraber, Barbara; Kqiku, Lumnije; Ebeleseder, Kurt A

2018-03-01

The aim of this study was to determine the proportion and severity of molar incisor hypomineralization (MIH) in primary school children in Graz (southeast of Austria). In 1111 children aged 6 to 12 years (mean age 9.0 ± 1.2), a wet examination of all teeth was performed by three trained examiners using a dental chair, optimal illumination, a dental mirror, and a dental explorer. All teeth with MIH lesions were registered so that different definitions of MIH were applicable. According to the European Academy of Pediatric Dentistry criteria that were considered valid at the time of the investigation, MIH was diagnosed when at least one first primary molar (FPM) was affected. MIH was present in 78 children (7.0%). In 64 children (5.8%), at least one molar and one incisor were affected (so-called M + IH). Additionally, in 9 children, only incisors were affected. In 7 affected children, teeth other than FPMs and incisors had MIH lesions. Almost an equal number of males (38) and females (40) were affected. The upper and lower molars were equally affected. The upper incisors were more frequently affected than the lower ones. Demarcated enamel opacities were the predominant types of defects. The proportion of MIH was 7.0% in Graz, which is similar to other comparable trials. This study has proven that MIH is an existing dental problem in Graz.

Conformal ALON® and spinel windows

NASA Astrophysics Data System (ADS)

Goldman, Lee M.; Smith, Mark; Ramisetty, Mohan; Jha, Santosh; Sastri, Suri

2017-05-01

The requirements for modern aircraft based reconnaissance systems are driving the need for conformal windows for future sensor systems. However, limitations on optical systems and the ability to produce windows in complex geometries currently limit the geometry of existing windows and window assemblies to faceted assemblies of flat windows. ALON consists primarily of aluminum and oxygen, similar to that of alumina, with a small amount of nitrogen added to help stabilize the cubic gamma-AlON phase. ALON's chemical similarity to alumina, translates into a robust manufacturing process. This ease of processing has allowed Surmet to produce ALON windows and domes in a wide variety of geometries and sizes. Spinel (MgAl2O4) contains equal molar amounts of MgO and Al2O3, and is a cubic material, that transmits further into the Infrared than ALON. Spinel is produced via powder processing techniques similar to those used to produce ALON. Surmet is now applying the lessons learned with ALON to produce conformal spinel windows and domes as well.

Physicochemical properties of binary solutions of propylene carbonate-acetonitrile in the range of 253.15-313.15 K

NASA Astrophysics Data System (ADS)

Tyunina, E. Yu.; Chekunova, M. D.

2017-05-01

The density, dynamic viscosity, and dielectric constant of propylene carbonate solutions with acetonitrile are measured over the composition of a mixed solvent at temperatures of 253.15, 273.15, 293.15, and 313.15 K. The molar volume, molar viscosity, and molar capacity of a mixture of propylene carbonate-acetonitrile and an excess amount of it are calculated. The effect the temperature and composition of the mixture have on the excess molar properties is discussed. A linear correlation is observed between the values of the molar fluidity, capacity, polarization, and molar volume of the studied system.

Thermodynamics of organic molecule adsorption on sorbents modified with 5-hydroxy-6-methyluracil by inverse gas chromatography.

PubMed

Gus'kov, Vladimir Yu; Gainullina, Yulia Yu; Ivanov, Sergey P; Kudasheva, Florida Kh

2014-08-22

The thermodynamic features of organic molecule adsorption from the gaseous phase of sorbents modified with 5-hydroxy-6-methyluracil (HMU) were studied. Molar internal energy and entropy of adsorption variation analyses showed that with every type surface, except for silica gel, layers of supramolecular structure have cavities equal in size with the ones revealed in HMU crystals by X-ray diffraction. Adsorption thermodynamics on HMU-modified sorbents depended on the amount of impregnated HMU and on the polarity, but not the porosity, of the initial sorbent. Polarity of the modified surface increased as a function of HMU quantity and initial sorbent mean pore size, but become appreciably lower if the initial surface is capable of hydrogen bonding. Copyright © 2014 Elsevier B.V. All rights reserved.

[Analysis of stress in periodontal ligament of the maxillary first molar on distal movement by nonlinear finite element method].

PubMed

Dong, Jing; Zhang, Zhe-chen; Zhou, Guo-liang

2015-06-01

To analyze the stress distribution in periodontal ligament of maxillary first molar during distal movement with nonlinear finite element analysis, and to compare it with the result of linear finite element analysis, consequently to provide biomechanical evidence for clinical application. The 3-D finite element model including a maxillary first molar, periodontal ligament, alveolar bone, cancellous bone, cortical bone and a buccal tube was built up by using Mimics, Geomagic, ProE and Ansys Workbench. The material of periodontal ligament was set as nonlinear material and linear elastic material, respectively. Loads of different combinations were applied to simulate the clinical situation of distalizing the maxillary first molar. There were channels of low stress in peak distribution of Von Mises equivalent stress and compressive stress of periodontal ligament in nonlinear finite element model. The peak of Von Mises equivalent stress was lower when it was satisfied that Mt/F minus Mr/F approximately equals 2. The peak of compressive stress was lower when it was satisfied that Mt/F was approximately equal to Mr/F. The relative stress of periodontal ligament was higher and violent in linear finite element model and there were no channels of low stress in peak distribution. There are channels in which stress of periodontal ligament is lower. The condition of low stress should be satisfied by applied M/F during the course of distalizing the maxillary first molar.

Investigation of efflorescence of inorganic aerosols using fluorescence spectroscopy.

PubMed

Choi, Man Yee; Chan, Chak K

2005-02-17

The phase transition is one of the most fundamental phenomena affecting the physical and chemical properties of atmospheric aerosols. Efflorescence, in particular, is not well understood, partly because the molecular interactions between the solute and water molecules of saturated or supersaturated solution droplets have not been well characterized. Recently, we developed a technique that combines the use of an electrodynamic balance and a fluorescence dye, 8-hydroxyl-1,3,6-pyrenetrisulfonate (pyranine), to study the distributions of solvated and free water in aqueous droplets (Choi, M. Y.; Chan, C. K.; Zhang, Y. H. J. Phys. Chem. A 2004, 108, 1133). We found that the equality of the amounts of solvated and free water is a necessary but not sufficient condition for efflorescence. For efflorescing compounds such as Na2SO4, (NH4)2SO4, and a mixture of NaCl and Na2SO4, the amount of free water decreases, while that of solvated water is roughly constant in bulk measurements and decreases less dramatically than that of free water in single-particle measurements as the relative humidity (RH) decreases. Efflorescence of the supersaturated droplets of these solutions occurs when the amounts of free and solvated water are equal, which is consistent with our previous observation for NaCl. For nonefflorescing compounds in single-particle levitation experiments such as MgSO4 and Mg(NO3)2, the amounts of free and solvated water are equal at a water-to-solute molar ratio of about 6, at which spectral changes due to the formation of contact ion pairs between magnesium and the anions occur as shown by Raman spectroscopy. Fluorescence imaging shows that the droplets of diluted Mg(NO3)2 (at 80% RH) and MgSO4 are homogeneous but those of NaCl, Na2SO4, (NH4)2SO4, and supersaturated Mg(NO3)2 (at 10% RH) are heterogeneous in terms of the solvated-to-free water distribution. The solvated-to-free water ratios in NaCl, Na2SO4, and (NH4)2SO4 droplets are higher in the outer regions by about half a radius deep than at the center of the droplets.

Comparison of K-loop Molar Distalization with that of Pendulum Appliance - A Prospective Comparative Study.

PubMed

Shashidhar, Nagam Reddy; Reddy, S Rama Koteswara; Rachala, Madhukar Reddy

2016-06-01

Molar distalization is the non extraction method of managing Class II malocclusions. The purpose of this study was to evaluate the skeletal and dentoalveolar effects of maxillary molar distalization with K-loop appliance, and to compare these effects with that of pendulum group. Class I and dental Class II malocclusions were divided into two groups of 15 each: In Group 1 (nine females and six males; mean age, 16.0±2.6 years) patients were treated with K-Loop molar distalization supported palatally by Nance button, while in Group 2 (seven females and eight males; mean age, 15.4±4.7 years), the patients were treated with conventional pendulum appliance. Standardized lateral cephalograms were taken at the beginning of treatment (T0) and at the end of molar distalization (T1) and the changes were statistically analyzed with paired t-test. The results showed no statistically significant difference in the amount of molar distalization in either of the appliance groups: the mean amount of molar distal movement of 5.1±0.8 mm and 4.93±1.68 mm was observed in the Group 1 and 2 respectively. The incisors moved mesially by 1.3±0.63 mm in Group 1 and 1.57±0.58 mm in Group 2. K-Loop molar distalizing appliance has similar skeletal and dentoalveolar effects as that of pendulum appliance, with the advantages of simple yet efficient to control the moment-force ratio to produce all types of tooth movements and also requires minimal patient co-operation.

Effect of Intraoral Aging on Debris Accumulation and Friction of First Molar Tubes.

PubMed

Chaptini, Edmond; Khoury, Elie; Cacciafesta, Vittorio; Naaman, Nada

2016-11-01

The aim of this article was to evaluate the impact of intraoral aging and site specificity on debris accumulation and friction in molar tubes after intraoral use. A total of 80 intraorally used first molar convertible tubes were provided by 20 orthodontic adolescent patients after 6 months of treatment. The specimens were divided into eight groups (n = 10) according to the mouth quadrant and the type of examination [four groups of ten tubes for scanning electron microscope (SEM) and four groups of ten tubes for friction test]. Scanning electron microscope examination was performed after opening the convertible caps and friction test was executed using a 0.019'' × 0.025'' stainless steel wire, which was inserted in the tubes belonging to each group. The Mann-Whitney test, analysis of variance (ANOVA), and Bonferroni tests were performed for statistical analysis at 0.01 level of significance. There was a significant increase in the amount of debris and frictional force after 6 months of intraoral exposure (p < 0.0001). Debris scores were higher (10% increase) on the upper tubes when compared with the lower ones, with no statistical difference. Mean frictional force ranged from 0.22 to 0.26 N according to the mouth quadrant, but the difference between groups was also not significant. After 6 months of intraoral exposure, there was a significant increase in the amount of debris in the first molar tube slots, leading to significantly higher frictional forces during sliding mechanics. The influence of site specificity on the amount of debris and on frictional forces of the first molar tubes could not be demonstrated. Molar tubes should be cleaned, before and during sliding mechanics, in order to minimize friction.

Forensic age estimation based on magnetic resonance imaging of third molars: converting 2D staging into 3D staging.

PubMed

De Tobel, Jannick; Hillewig, Elke; Verstraete, Koenraad

2017-03-01

Established methods to stage development of third molars for forensic age estimation are based on the evaluation of radiographs, which show a 2D projection. It has not been investigated whether these methods require any adjustments in order to apply them to stage third molars on magnetic resonance imaging (MRI), which shows 3D information. To prospectively study root stage assessment of third molars in age estimation using 3 Tesla MRI and to compare this with panoramic radiographs, in order to provide considerations for converting 2D staging into 3D staging and to determine the decisive root. All third molars were evaluated in 52 healthy participants aged 14-26 years using MRI in three planes. Three staging methods were investigated by two observers. In sixteen of the participants, MRI findings were compared with findings on panoramic radiographs. Decisive roots were palatal in upper third molars and distal in lower third molars. Fifty-seven per cent of upper third molars were not assessable on the radiograph, while 96.9% were on MRI. Upper third molars were more difficult to evaluate on radiographs than on MRI (p < .001). Lower third molars were equally assessable on both imaging techniques (93.8% MRI, 98.4% radiograph), with no difference in level of difficulty (p = .375). Inter- and intra-observer agreement for evaluation was higher in MRI than in radiographs. In both imaging techniques lower third molars showed greater inter- and intra-observer agreement compared to upper third molars. MR images in the sagittal plane proved to be essential for staging. In age estimation, 3T MRI of third molars could be valuable. Some considerations are, however, necessary to transfer known staging methods to this 3D technique.

Molar distalization with 2K appliance: one-year follow-up

PubMed Central

Tripathi, Tulika; Rai, Priyank; Singh, Navneet

2017-01-01

Correction of class II molars in growing patients with acceptable facial profile can be performed by distalization of maxillary first molars. However, in patients where compliance is difficult intraoral means of molar distalization is required. This case report describes the use and effectiveness of a novel 2K appliance in an 11-year-old female having an orthognathic profile, skeletal Class I relation, and Angle's Class II division 1 malocclusion with crowding of 8 mm and 3 mm in the maxillary and mandibular arches, respectively. Nonextraction treatment was planned with bilateral distalization of the maxillary first molars. The amount of distalization achieved by 2K appliance was 3.5 mm with only 1° distal tipping. The 2K appliance required minimal patient cooperation, produced bodily movement of molars with minimal tipping/rotation, and prevented anchorage loss of the anterior teeth. This 2K molar distalization appliance was found to be an effective technique to control molars in all three planes of space. PMID:28717634

Selenium and mercury molar ratios in commercial fish from New Jersey and Illinois: variation within species and relevance to risk communication.

PubMed

Burger, Joanna; Gochfeld, Michael

2013-07-01

There is an emerging consensus that people consuming large amounts of fish with selenium:mercury ratios below 1 are at higher risk from mercury toxicity. As the relative amount of selenium increases compared to mercury, risk may be lowered, but it is unclear how much excess selenium is required. It would be useful if the selenium:mercury ratio was relatively consistent within a species, but this has not been the case in our studies of wild-caught fish. Since most people in developed countries and urban areas obtain their fish and other seafood commercially, we examined selenium:mercury molar ratios in commercial fish purchased in stores and fish markets in central New Jersey and Chicago. There was substantial interspecific and intraspecific variation in molar ratios. Across species the selenium:mercury molar ratio decreased with increasing mean mercury levels, but selenium variation also contributed to the ratio. Few samples had selenium:mercury molar ratios below 1, but there was a wide range in ratios, complicating the interpretation for use in risk management and communication. Before ratios can be used in risk management, more information is needed on mercury:selenium interactions and mutual bioavailability, and on the relationship between molar ratios and health outcomes. Further, people who are selenium deficient may be more at risk from mercury toxicity than others. Copyright © 2013 Elsevier Ltd. All rights reserved.

Selenium and mercury molar ratios in commercial fish from New Jersey and Illinois: Variation within species and relevance to risk communication

PubMed Central

Burger, Joanna; Gochfeld, Michael

2015-01-01

There is an emerging consensus that people consuming large amounts of fish with selenium:mercury ratios below 1 may be at higher risk from mercury toxicity. As the relative amount of selenium increases compared to mercury, risk may be lowered, but it is unclear how much excess selenium is required. It would be useful if the selenium:mercury ratio was relatively consistent within a species, but this has not been the case in our studies of wild-caught fish. Since most people in developed countries and urban areas obtain their fish and other seafood commercially, we examined selenium:mercury molar ratios in commercial fish purchased in stores and fish markets in central New Jersey and Chicago. There was substantial interspecific and intraspecific variation in molar ratios. Across species the selenium:mercury molar ratio decreased with increasing mean mercury levels, but selenium variation also contributed to the ratio. Few samples had selenium:mercury molar ratios below 1, but there was a wide range in ratios, complicating the interpretation for use in risk management and communication. Before ratios can be used in risk management, more information is needed on mercury:selenium interactions and mutual bioavailability, and on the relationship between molar ratios and health outcomes. Further, people who are selenium deficient may be more at risk from mercury toxicity than others. PMID:23541437

Comparison of K-loop Molar Distalization with that of Pendulum Appliance - A Prospective Comparative Study

PubMed Central

Shashidhar, Nagam Reddy; Reddy, S.Rama Koteswara

2016-01-01

Introduction Molar distalization is the non extraction method of managing Class II malocclusions. Aim The purpose of this study was to evaluate the skeletal and dentoalveolar effects of maxillary molar distalization with K-loop appliance, and to compare these effects with that of pendulum group. Materials and Methods Class I and dental Class II malocclusions were divided into two groups of 15 each: In Group 1 (nine females and six males; mean age, 16.0±2.6 years) patients were treated with K-Loop molar distalization supported palatally by Nance button, while in Group 2 (seven females and eight males; mean age, 15.4±4.7 years), the patients were treated with conventional pendulum appliance. Standardized lateral cephalograms were taken at the beginning of treatment (T0) and at the end of molar distalization (T1) and the changes were statistically analyzed with paired t-test. Results The results showed no statistically significant difference in the amount of molar distalization in either of the appliance groups: the mean amount of molar distal movement of 5.1±0.8 mm and 4.93±1.68 mm was observed in the Group 1 and 2 respectively. The incisors moved mesially by 1.3±0.63 mm in Group 1 and 1.57±0.58 mm in Group 2. Conclusion K-Loop molar distalizing appliance has similar skeletal and dentoalveolar effects as that of pendulum appliance, with the advantages of simple yet efficient to control the moment-force ratio to produce all types of tooth movements and also requires minimal patient co-operation. PMID:27504403

Comparative evaluation of molar distalization therapy using pendulum and distal screw appliances

PubMed Central

Cafagna, Alessandra; Fontana, Mattia; Cozzani, Mauro

2015-01-01

Objective To compare dentoalveolar and skeletal changes produced by the pendulum appliance (PA) and the distal screw appliance (DS) in Class II patients. Methods Forty-three patients (19 men, 24 women) with Class II malocclusion were retrospectively selected for the study. Twenty-four patients (mean age, 12.2 ± 1.5 years) were treated with the PA, and 19 patients (mean age, 11.3 ± 1.9 years) were treated with the DS. The mean distalization time was 7 months for the PA group and 9 months for the DS group. Lateral cephalograms were obtained at T1, before treatment, and at T2, the end of distalization. A Mann-Whitney U test was used for statistical comparisons of the two groups between T1 and T2. Results PA and DS were equally effective in distalizing maxillary molars (4.7 mm and 4.2 mm, respectively) between T1 and T2; however, the maxillary first molars showed less distal tipping in the DS group than in the PA group (3.2° vs. 9.0°, respectively). Moreover, significant premolar anchorage loss (2.7 mm) and incisor proclination (5.0°) were noted in the PA group, whereas premolar distal movement (1.9 mm) and no significant changes at the incisor (0.1°) were observed in the DS group. No significant sagittal or vertical skeletal changes were detected between the two groups during the distalization phase. Conclusions PA and DS seem to be equally effective in distalizing maxillary molars; however, greater distal molar tipping and premolar anchorage loss can be expected using PA. PMID:26258063

Direct quantification of molar masses of copolymers by online liquid chromatography under critical conditions-nuclear magnetic resonance and size exclusion chromatography-nuclear magnetic resonance.

PubMed

Hehn, Mathias; Wagner, Thomas; Hiller, Wolf

2014-01-07

Online LCCC-NMR and SEC-NMR are compared regarding the determination of molar masses of block copolymers. Two different direct referencing methods are particularly demonstrated in LCCC-NMR for a detailed characterization of diblock copolymers and their co-monomers. First, an intramolecular reference group was used for the direct determination of block lengths and molar masses. For the first time, it was shown that LCCC-NMR can be used for an accurate determination of Mw and Mn of copolymers. These data were in perfect agreement with SEC-NMR measurements using the same intramolecular referencing method. In contrast, the determination of molar masses with common relative methods based on calibrations with homopolymers delivered inaccurate results for all investigated diblock copolymers due to different hydrodynamic volumes of the diblock copolymer compared to their homopolymers. The intramolecular referencing method provided detailed insights in the co-monomer behavior during the chromatographic separation of LCCC. Especially, accurate chain lengths and chemical compositions of the "invisible" and "visible" blocks were quantified during the elution under critical conditions and provided new aspects to the concept of critical conditions. Second, an external reference NMR signal was used to directly determine concentrations and molar masses of the block copolymers from the chromatographic elution profile. Consequently, the intensity axes of the resulting chromatograms were converted to molar amounts and masses, allowing for determination of the amount of polymer chains with respect to elution volume, the evaluation of the limiting magnitude of concentration for LCCC-NMR, and determination of the molar masses of copolymers.

Testing the inhibitory cascade model in Mesozoic and Cenozoic mammaliaforms

PubMed Central

2013-01-01

Background Much of the current research in the growing field of evolutionary development concerns relating developmental pathways to large-scale patterns of morphological evolution, with developmental constraints on variation, and hence diversity, a field of particular interest. Tooth morphology offers an excellent model system for such ‘evo-devo’ studies, because teeth are well preserved in the fossil record, and are commonly used in phylogenetic analyses and as ecological proxies. Moreover, tooth development is relatively well studied, and has provided several testable hypotheses of developmental influences on macroevolutionary patterns. The recently-described Inhibitory Cascade (IC) Model provides just such a hypothesis for mammalian lower molar evolution. Derived from experimental data, the IC Model suggests that a balance between mesenchymal activators and molar-derived inhibitors determines the size of the immediately posterior molar, predicting firstly that molars either decrease in size along the tooth row, or increase in size, or are all of equal size, and secondly that the second lower molar should occupy one third of lower molar area. Here, we tested the IC Model in a large selection of taxa from diverse extant and fossil mammalian groups, ranging from the Middle Jurassic (~176 to 161 Ma) to the Recent. Results Results show that most taxa (~65%) fell within the predicted areas of the Inhibitory Cascade Model. However, members of several extinct groups fell into the regions where m2 was largest, or rarely, smallest, including the majority of the polyphyletic “condylarths”. Most Mesozoic mammals fell near the centre of the space with equality of size in all three molars. The distribution of taxa was significantly clustered by diet and by phylogenetic group. Conclusions Overall, the IC Model was supported as a plesiomorphic developmental system for Mammalia, suggesting that mammal tooth size has been subjected to this developmental constraint at least since the divergence of australosphenidans and boreosphenidans approximately 180 Ma. Although exceptions exist, including many ‘condylarths’, these are most likely to be secondarily derived states, rather than alternative ancestral developmental models for Mammalia. PMID:23565593

Entropy of gaseous boron monobromide

NASA Astrophysics Data System (ADS)

Wang, Jian-Feng; Peng, Xiao-Long; Zhang, Lie-Hui; Wang, Chao-Wen; Jia, Chun-Sheng

2017-10-01

We present an explicit representation of molar entropy for gaseous boron monobromide in terms of experimental values of only three molecular constants. Fortunately, through comparison of theoretically calculated results and experimental data, we find that the molar entropy of gaseous boron monobromide can be well predicted by employing the improved Manning-Rosen oscillator to describe the internal vibration of boron monobromide molecule. The present approach provides also opportunities for theoretical predictions of molar entropy for other gases with no use of large amounts of experimental spectroscopy data.

Multiple extraction patterns in severe discrepancy cases.

PubMed

Anderson, B D

1975-10-01

Thirty-five cases have been collected from colleagues which illustrate that removal of additional maxillary teeth, following first bicuspid extractions, can allow the successful resolution of difficult discrepancy and anchorage cases. Charts 1 and 2 describe the amounts of space that might be expected by removal of additional upper bicuspids, upper first molars, and upper second molars. The findings on upper second molars are admittedly limited. Anchorage values as expressed by an efficiency percentage were approximately what would be expected from a study of anchorage values of the roots of teeth. The removal of upper second bicuspids has a better anchorage efficiency potential than the upper first molar, but this may be overcome somewhat by the greater size of the molar. Clear guidance cannot be given as to which teeth to remove in a specific case, but it is the observation of the author that for cases that are still in full Class II following four bicuspid space closure, upper second bicuspid removal would be more helpful from an anchorage perspective, whereas for cases that are in end-to-end molar relationship or require only a few millimeters to move into Class I, the upper first molar might be the tooth of choice. Also, the supper first molar removal allows for a more "normal" appearing arch assuming normal alignment and size of the upper second and third molars. The comparison with the nonextraction control group showed an enormous difference in the amount of incisor retraction that extractions provide when related to the maxilla. The nonextraction control group, though experiencing dramatic correction of Class II relationships, showed no incisor movement within the maxilla. Some problems which appeared in the sample were described. Removal of upper teeth in addition to the four first bicuspids can be a solution to an occasional anchorage, skeletal, growth or cooperation problem.

Silicon isotope amount ratios and molar masses for two silicon isotope reference materials: IRMM-018a and NBS28

NASA Astrophysics Data System (ADS)

Valkiers, S.; Ding, T.; Inkret, M.; Ruße, K.; Taylor, P.

2005-04-01

A new 2 kg batch of SiO2 crystals, IRMM-018a as well as the existing NBS28 silica sand (or RM 8546, obtained by I. Friedman from U.S. Geological Survey) have been characterised for their "absolute" silicon isotope composition and molar mass. The amount-of-substance measurements needed for that purpose were performed on the IRMM amount comparator (Avogadro II) on samples from these batches, which were converted to gaseous silicon tetra-fluoride (SiF4). The isotope amount ratio measurements were calibrated by means of synthesized isotope amount ratios realized in the form of synthetic Si isotope mixtures, the measurement procedure of which makes them SI-traceable. IRMM-018a is intended to be used as Isotope Reference Material for isotope amount measurements in geochemical and other isotope abundance studies of silicon. It is distributed in samples of about 0.1 mol and will replace IRMM-018 (exhausted).

Comparison of effects of ProTaper, HeroShaper, and Gates Glidden Burs on cervical dentin thickness and root canal volume by using multislice computed tomography.

PubMed

Mahran, Abeer H; AboEl-Fotouh, Mona M

2008-10-01

The purpose of this study was to compare the effects of 3 different instruments used to prepare curved root canals on the remaining cervical dentin thickness and total amount of dentin removed from root canals during instrumentation by using multislice computed tomography. Mesiobuccal canals of 45 mandibular first molars with curvature between 30-40 degrees were divided into 3 equal groups: ProTaper, Hero Shaper, and Gates Glidden Bur with Flex-R hand file. Cervical dentin thickness and canal volume were measured before and after instrumentation by using multislice computed tomography and image analysis software. The results indicated that ProTaper removed significantly less cervical dentin from distal wall of the root (dangerous zone) than HeroShaper and Gates Glidden Bur (P < .05). The total dentin removed during canal instrumentation was significantly more with ProTaper system (P < .05).

Absorption of nickel, chromium, and iron by the root surface of primary molars covered with stainless steel crowns.

PubMed

Keinan, David; Mass, Eliyahu; Zilberman, Uri

2010-01-01

Objective. The purpose of this study was to analyze the absorption of metal ions released from stainless steel crowns by root surface of primary molars. Study Design. Laboratory research: The study included 34 primary molars, exfoliated or extracted during routine dental treatment. 17 molars were covered with stainless-steel crowns for more than two years and compared to 17 intact primary molars. Chemical content of the mesial or distal root surface, 1 mm apically to the crown or the cemento-enamel junction (CEJ), was analyzed. An energy dispersive X-ray spectrometer (EDS) was used for chemical analysis. Results. Higher amounts of nickel, chromium, and iron (5-6 times) were found in the cementum of molars covered with stainless-steel crowns compared to intact molars. The differences between groups were highly significant (P < .001). Significance. Stainless-steel crowns release nickel, chromium, and iron in oral environment, and the ions are absorbed by the primary molars roots. The additional burden of allergenic metals should be reduced if possible.

Evaluation of skeletal and dental age using third molar calcification, condylar height and length of the mandibular body.

PubMed

Kedarisetty, Sunil Gupta; Rao, Guttikonda Venkateswara; Rayapudi, Naveen; Korlepara, Rajani

2015-01-01

To identify the most reliable method for age estimation among three variables, that is, condylar height, length of mandibular body and third molar calcification by Demirjian's method. Orthopantomograms and lateral cephalograms of 60 patients with equal gender ratio were included in the study, among each gender 15 subjects were below 18 years and 15 subjects were above 18 years. Lateral cephalograms were traced, height of condyle and mandibular body are measured manually on the tracing paper, OPG's were observed on radiographic illuminator and maturity score of third molar calcification was noted according to Demirjian's method. All the measurements were subjected to statistical analysis. The results obtained are of no significant difference between estimated age and actual age with all three parameters (P > 0.9780 condylar height, P > 0.9515 length of mandibular body, P > 0.8611 third molar calcification). Among these three, length of mandibular body shows least standard error test (i.e. 0.188). Although all three parameters can be used for age estimation, length of mandibular body is more reliable followed by height of condyle and third molar calcification.

Comparative evaluation of molar distalization therapy with erupted second molar: Segmented versus Quad Pendulum appliance.

PubMed

Caprioglio, Alberto; Cozzani, Mauro; Fontana, Mattia

2014-01-01

There are controversial opinions about the effect of erupted second molars on distalization of the first molars. Most of the distalizing devices are anchored on the first molars, without including second molars; so, differences between sequentially distalize maxillary molars (second molar followed by the first molar) or distalize second and first molars together are not clear. The aim of the study was to compare sequential versus simultaneous molar distalization therapy with erupted second molar using two different modified Pendulum appliances followed by fixed appliances. The treatment sample consisted of 35 class II malocclusion subjects, divided in two groups: group 1 consisted of 24 patients (13 males and 11 females) with a mean pre-treatment age of 12.9 years, treated with the Segmented Pendulum (SP) and fixed appliances; group 2 consisted of 11 patients (6 males and 5 females) with a mean pre-treatment age of 13.2 years, treated with the Quad Pendulum (QP) and fixed appliances. Lateral cephalograms were obtained before treatment (T1), at the end of distalization (T2), and at the end of orthodontic fixed appliance therapy (T3). A Student t test was used to identify significant between-group differences between T1 to T2, T2 to T3, and T1 to T3. QP and SP were equally effective in distalizing maxillary molars (3.5 and 4 mm, respectively) between T1 and T2; however, the maxillary first molar showed less distal tipping (4.6° vs. 9.6°) and more extrusion (1.1 vs. 0.2 mm) in the QP group than in the SP group, as well as the vertical facial dimension, which increased more in the QP group (1.2°) than in the SP group (0.7°). At T3, the QP group maintained greater increase in lower anterior facial height and molar extrusion and decrease in overbite than the SP group. Quad Pendulum seems to have greater increase in vertical dimension and molar extrusion than the Segmented Pendulum.

Do osmotic forces play a role in the uptake of water by human skin?

PubMed

van Kemenade, Patricia M; Houben, Mark M J; Huyghe, Jacques M; Douven, Lucien F A

2004-05-01

To describe the water and ion transport through the skin under different conditions, we developed a three-component mixture model. This model has proven to describe the transient change in transepidermal water loss (TEWL) after a change in relative humidity and the result of damage to the skin. Osmotic forces arc present in the model. To assess the influence of osmotic forces on the water uptake of the skin, we investigated transient TEWL values after 1 h application of salt solutions of different molarities (0, 1, and 4 M NaCl). Filters saturated with 0, 1, and 4 M NaCl solution were applied for 1 h under occlusion. TEWL was measured 50-90 min after removal of the solution. The transient water loss curves were fit with an exponential function. The area under the fitted curve was calculated and regarded as a measure for the amount of extra water absorbed in the skin. For all molarities, TEWL is increased immediately after removal of the solution. In time, this increase decays until pre-application values are reached again. The rate of decrease differs significantly for all three molarities. Ninety-five per cent of the increase has been reversed after 30, 19, and 6 min for the 0, 1, and 4 M case, respectively. The amount of water absorbed differs significantly between the three molarities 7.3+/-2.0; 3.9+/-1.0; 2.0+/-0.5 g/m(2), respectively. In all cases, there was an increase in TEWL immediately after removal of the solution. The significant differences in decay time and amount of water absorbed between the three molarities indicate that osmotic forces do play an important role in the water uptake.

11 CFR 9008.12 - Repayments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... notify the national committee, and the national committee shall pay to the Secretary an amount equal to... committee shall pay to the Secretary an amount equal to the amount specified. (3) Excessive contributions... national committee shall pay to the Secretary an amount equal to the amount specified. (4) Improper usage...

Anesthetic Success of an Inferior Alveolar Nerve Block and Supplemental Articaine Buccal Infiltration for Molars and Premolars in Patients with Symptomatic Irreversible Pulpitis.

PubMed

Fowler, Sara; Drum, Melissa; Reader, Al; Beck, Mike

2016-03-01

The purpose of this retrospective study was to determine the anesthetic success of the inferior alveolar nerve (IAN) block, and supplemental articaine buccal infiltration after a failed IAN block, in first and second molars and premolars in patients presenting with symptomatic irreversible pulpitis. As part of 6 studies, 375 emergency patients presenting with symptomatic irreversible pulpitis received 2% lidocaine with 1:100,000 epinephrine via an IAN block. After profound lip numbness, endodontic access and instrumentation were initiated. If the patient felt moderate to severe pain, a supplemental buccal infiltration of a cartridge of 4% articaine with 1:100,000 epinephrine was administered (204 patients), and endodontic treatment continued. Success was defined as the ability to access and instrument the tooth without pain (visual analogue scale rating of 0) or mild pain (visual analogue scale rating less than or equal to 54 mm). IAN block success was 28% for the first molars, 25% for the second molars, and 39% for the premolars. There were no significant differences when comparing molars with premolars. For the supplemental articaine buccal infiltration, success was 42% for the first molars, 48% for the second molars, and 73% for the premolars. There were no significant differences when comparing the molars, but there was a significant difference when comparing the premolars with the molars. For patients presenting with symptomatic irreversible pulpitis, the success rates for the IAN block and supplemental buccal infiltration of articaine of the molars and premolars would not be high enough to ensure profound pulpal anesthesia. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Ectopic eruption of first permanent molars: presenting features and associations.

PubMed

Mooney, G C; Morgan, A G; Rodd, H D; North, S

2007-09-01

To investigate presenting features of ectopically erupting first permanent molars and associations with other dental anomalies. Prospective convenience study. 28 panoral radiographs were collected, over a 24-month period, of 7-11 year-old children with radiographic evidence of ectopic eruption of first permanent molars who presented to a Dental Teaching Hospital in the North of England. A further 20 radiographs were collected of matched patients with no evidence of ectopic molar eruption. All radiographs were analysed under standard conditions to record the distribution and type of ectopic eruption (if present). In addition, the presence of the following dental anomalies was noted: cleft lip and/or palate; supernumerary teeth; hypodontia, and infraocclusion of primary molars. Chi-squared analysis was performed to determine any significant differences in the frequency of these dental anomalies between ectopic molar and control groups. For patients with ectopic molar eruption, the majority demonstrated ectopic eruption of either one or two first permanent molars (32% and 57% of subjects respectively). There were a similar proportion of 'jumps' and 'holds'. 92% of these were maxillary teeth and there was equal left and right distribution. Interestingly, a positive record of ectopic eruption was only documented in the dental records of 35.7% of these subjects. Children with ectopic eruption were significantly more likely to have at least one additional dental anomaly than was the case for the control group (60.7% versus 25%). Notably, primary molar infraocclusion and cleft lip/palate were significantly more frequent in the ectopic group. This study, the first in a British population, has identified a significant association between ectopic eruption of first permanent molars and other dental anomalies. A multifactorial aetiology is thus supported and clinicians should be alert to the co-existence of ectopic eruption and other dental anomalies.

Combined treatment with headgear and the Frog appliance for maxillary molar distalization: a randomized controlled trial

PubMed Central

2013-01-01

Objective To evaluate the efficiency of the Frog appliance (FA) alone or in combination with headgear for distalizing the maxillary molars. Methods Fifty patients (25 males and 25 females) aged 12.6 - 16.7 years who received treatment for Class II malocclusion at the Orthodontic Clinic of Al-Baath University were selected for this study and randomly divided into 2 equal groups. Maxillary molar distalization was achieved using the FA alone (group 1) or a combination of the FA with high-pull headgear worn at night (group 2). Lateral cephalograms were obtained before and after treatment. Results The maxillary molars moved distally by 5.51 and 5.93 mm in groups 1 and 2, respectively. Distal movements were associated with axial tipping by 4.96° and 1.25°, and with loss of anchorage by mesial movement of the second maxillary premolars by 2.70 and 0.90 mm in groups 1 and 2, respectively. The combined use of the FA and nighttime high-pull headgear decreased the distalization time and improved the ratio of maxillary molar distalization movement relative to the overall opening space between the first maxillary molars and second premolars. Conclusions The FA can effectively distalize the maxillary molars, this distalization associates with some unfavorable changes. Nighttime use of high-pull headgear combined with the FA can reduce these unfavorable changes and improve treatment outcomes. PMID:23671835

[The preliminary study on nursing the extraction of mandibular mesioangular impacted third molar using reversal high-speed air turbine].

PubMed

Song, Juan; Bi, Xiaoqin

2012-08-01

To study the nursing methods and its effect in mandibular mesioangular impacted third molar extraction with reversal high-speed air turbine. 60 patients with mandibular mesioangular impacted third molar were selected in this study, who were treated in Department of Senior Dentists, West China School of Stomatology, Sichuan University, between June to December 2010. They were randomly and equally divided into control group and experimental group (n=30). The former was treated with tradition chisel splint method while the latter was treated with reversal high-speed air turbine extraction and provided appropriate nursing interventions. Postoperative reactions and wound healing status were evaluated through consultation. There were significant differences between control group and experimental group in terms of postoperative bleeding wound, swelling, dry socket and so on (P<0.05). Mandibular mesioangular impacted third molar extraction with reversal high-speed air turbine is effective, and the corresponding nursing measure is worthy further promotion.

26 CFR 301.6343-2 - Return of wrongfully levied upon property.

Code of Federal Regulations, 2011 CFR

2011-04-01

... IRS may return— (i) The specific property levied upon; (ii) An amount of money equal to the amount of money levied upon; or (iii) An amount of money equal to the amount of money received by the United... property, the property may be returned at any time. An amount equal to the amount of money levied upon or...

26 CFR 301.6343-2 - Return of wrongfully levied upon property.

Code of Federal Regulations, 2010 CFR

2010-04-01

... IRS may return— (i) The specific property levied upon; (ii) An amount of money equal to the amount of money levied upon; or (iii) An amount of money equal to the amount of money received by the United... property, the property may be returned at any time. An amount equal to the amount of money levied upon or...

Research on the compressive strength of basic magnesium salts and cyanide slag solidified body

NASA Astrophysics Data System (ADS)

Tu, Yubo; Han, Peiwei; Ye, Shufeng; Wei, Lianqi; Zhang, Xiaomeng; Fu, Guoyan; Yu, Bo

2018-02-01

The solidification of cyanide slag by using basic magnesium salts could reduce pollution and protect the environment. Experiments were carried out to investigate the effects of age, mixing amount of cyanide slag, water cement ratio and molar ratio of MgO to MgSO4 on the compressive strength of basic magnesium salts and cyanide slag solidified body in the present paper. It was found that compressive strength of solidified body increased with the increase of age, and decreased with the increase of mixing amount of cyanide slag and water cement ratio. The molar ratio of MgO to MgSO4 should be controlled in the range from 9 to 11 when the mixing amount of cyanide slag was larger than 80 mass%.

Oxidation of Alcohols by Botrytis cinerea1

PubMed Central

Fukuda, D. S.; Brannon, D. R.

1971-01-01

Crude cell-free preparations of Botrytis cinerea were found to oxidize straight-chain primary alcohols (except methanol), aromatic primary alcohols, and unsaturated primary alcohols. The resulting products were the corresponding aldehydes and an equal molar quantity of hydrogen peroxide. PMID:5102778

Evaluation of skeletal and dental age using third molar calcification, condylar height and length of the mandibular body

PubMed Central

Kedarisetty, Sunil Gupta; Rao, Guttikonda Venkateswara; Rayapudi, Naveen; Korlepara, Rajani

2015-01-01

Aim: To identify the most reliable method for age estimation among three variables, that is, condylar height, length of mandibular body and third molar calcification by Demirjian's method. Materials and Methods: Orthopantomograms and lateral cephalograms of 60 patients with equal gender ratio were included in the study, among each gender 15 subjects were below 18 years and 15 subjects were above 18 years. Lateral cephalograms were traced, height of condyle and mandibular body are measured manually on the tracing paper, OPG's were observed on radiographic illuminator and maturity score of third molar calcification was noted according to Demirjian's method. All the measurements were subjected to statistical analysis. Results: The results obtained are of no significant difference between estimated age and actual age with all three parameters (P > 0.9780 condylar height, P > 0.9515 length of mandibular body, P > 0.8611 third molar calcification). Among these three, length of mandibular body shows least standard error test (i.e. 0.188). Conclusion: Although all three parameters can be used for age estimation, length of mandibular body is more reliable followed by height of condyle and third molar calcification. PMID:26005300

'Bone map' for a safe placement of miniscrews generated by computed tomography.

PubMed

Hernández, L C; Montoto, G; Puente Rodríguez, M; Galbán, L; Martínez, V

2008-06-01

The aim of this manuscript is to provide a bone map that can be used as a general guide to determine the areas where miniscrews can be safely anchored. Twenty-one computed tomographies (CTs) of maxilla and mandible were taken by the imaging centre ORTOSCAN and two measures were taken: --first, the interradicular space in the mesiodistal plane of the maxillary and mandible teeth with slices taken at 3, 6, and 9 mm from the alveolar crest, in the palatine and vestibular slices, --second, the interradicular space in the vestibular-lingual direction. We can see that the greatest amount of mesiodistal bone is between the first and second inferior molars on the vestibular side and between the second and first inferior molars on the lingual side, whereas the least amount of bone on the mesiodistal plane is between the inferior incisors on the vestibular side. To determine the length of the miniscrew, we must take into account that the greatest amount of vestibular-lingual bone is between the first and second inferior molar, whereas the least amount is between the central and lateral inferior incisors. Mesiodistal values in vestibular are those that must be considered when inserting the microscrew so as not to damage the dental tissue. Mesiodistal measurements taken in palatal-lingual do not present problems when inserting microscrews.

Influence of orthodontic treatment with first premolar extraction on the angulation of the mandibular third molar.

PubMed

Al Kuwari, Huda M; Talakey, Arwa A; Al-Sahli, Reem M; Albadr, Anisa H

2013-06-01

To evaluate the influence of orthodontic treatment that involved first premolars extraction on the angulation of the developing mandibular third molars, and whether this will result in an improvement in it's path of eruption during tooth development. A cross-sectional radiographic study was conducted using 80 panoramic radiographs of 40 orthodontic patients previously treated at the College of Dentistry, King Saud University, Riyadh, Kingdom of Saudi Arabia. The sample consisted of 2 groups, extraction and non-extraction orthodontic therapy group with equal number of patients in each group. The orthodontic treatment of the extraction group involved the extraction of first premolars, whilst non-extraction group had received orthodontic therapy without teeth extraction. The angulation of the right and left third mandibular molars was measured in each patient separately, and the data was analyzed using the non-parametric Mann-Whitney Test. The present data has shown significant improvement in the third molars angulation in the extraction orthodontic therapy group compared to non-extraction group, Although this finding was significant in both genders, females tend to show better response in the improvement of third molar angulation to extraction therapy than males (p=0.001, p=0.006). Orthodontic treatment with first premolars extraction has improved the third molars angulation during their course of eruptions and consequently supports the decision of the orthodontic extraction therapy approach in borderline cases.

Preparation and characterization of PEG-modified PCL nanoparticles for oxygen carrier: a new application of Fourier transform infrared spectroscopy for quantitative analysis of the hemoglobin in nanoparticles.

PubMed

Shan, Xiaoqian; Yuan, Yuan; Liu, Changsheng

2015-01-01

The influence of polyethylene glycol (PEG) molar ratio on the nanoparticles (NPs) properties is described herein. Especially, a facile and nondestructive determination route has been raised to quantify the hemoglobin (Hb) amounts in NPs via an internal standard FTIR method. The subsequent results indicated that, briefly, the PEG molar ratio did negligible influence on the size distribution of NPs, however, it did have great effect on the NPs zeta potential and hydrophilicity as well as the Hb loading amount. These findings highlight that the PEG density on the surface is a key parameter affecting the NPs properties.

Protraction of mandibular second and third molars into missing first molar spaces for a patient with an anterior open bite and anterior spacing.

PubMed

Baik, Un-Bong; Chun, Youn-Sic; Jung, Min-Ho; Sugawara, Junji

2012-06-01

In a young woman, aged 18 years 8 months, who had an anterior open bite and anterior spacing, the right and left mandibular first molar extraction spaces were closed by protraction of the second and third molars without reciprocal retraction of the incisors and the premolars. The amounts of protraction for the second molars were 12 mm on the right side and 11 mm on the left side. Two miniscrews were inserted into the mesiobuccal side of the edentulous spaces, and 2 more screws were inserted into the anterior sites after removing previous miniscrews. In addition, 4 miniscrews were inserted into the buccal and palatal sides between the first and second maxillary molars to intrude the maxillary posterior teeth, which had extruded into the missing mandibular spaces. Careful biomechanical consideration was used to prevent extrusion of the molars and worsening of the anterior open bite from protraction of the posterior teeth. Ultimately, the anterior open bite was corrected by both intrusion of the maxillary molars and extrusion of the maxillary anterior teeth. Excellent occlusion and correction of the anterior open bite were achieved without tipping, rotation of the posterior teeth, or other problems. The right mandibular third molar, which had been impacted at the beginning of treatment, erupted into the second molar space and functioned properly. At the 1-year follow-up examination, the patient had a slight anterior open bite, but closure of the first molar extraction spaces was well maintained. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Micro-computed tomography evaluation of the preparation of mesiobuccal root canals in maxillary first molars with Hyflex CM, Twisted Files, and K3 instruments.

PubMed

Zhao, Dan; Shen, Ya; Peng, Bin; Haapasalo, Markus

2013-03-01

The aim of this study was to describe the canal shaping properties of Hyflex CM, Twisted Files (TF), and K3 rotary nickel-titanium files by using micro-computed tomography in maxillary first molars. A total of 36 mesiobuccal root canals of maxillary first molars were prepared with Hyflex CM, TF, or K3 system. Micro-computed tomography was used to scan the specimens before and after instrumentation. The volume of untreated canal, volume of dentin removed after preparation, amount of uninstrumented area, and the transportation for the coronal, middle, and apical thirds of canals were measured. Instrumentation of canals increased their volume and surface area. TF group showed the greatest amount of volumetric dentin removal (P < .05), whereas no significant difference was found in Hyflex CM and K3 groups. There were no significant differences among instrument types concerning uninstrumented area. The TF system produced significantly less transportation than the K3 system in the apical third of canals. No significant difference was found between TF and Hyflex CM instruments relating to apical transportation. In vitro, Hyflex and TF instruments shaped curved root canals in maxillary first molar without significant shaping errors. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

[The effects of topical fluoridation of Ketac Molar Aplicap glass-ionomer material on the growth of cariogenic bacteria contained in the dental plaque].

PubMed

Płuciennik-Stronias, Małgorzata; Zarzycka, Beata; Bołtacz-Rzepkowska, Elzbieta

2013-01-01

Dental caries is a bacterial disease. The most important element used in caries prevention is fluoride, which is derived from the air, diet or fluoride-containing preparations and materials, e.g. glass-ionomer restorations. Modern fluoride-containing restorative materials are capable of releasing fluoride to the environment. Fluoride can be also accumulated in glass-ionomer cements, thus an attempt was made to saturate these materials with fluoride. The aim of the study was to evaluate the effect of topical fluoridation of Ketac Molar Aplicap glass-ionomer cement on the growth of Lactobacillus spp. in the dental plaque. The study was carried out in 15 patients with good oral hygiene, in whom 35 fillings with conventional glass-ionomer material, Ketac Molar Aplicap, were performed. After 6 months, three-day dental plaque from these fillings was examined. Next, fluoride was rubbed on the glass-ionomer surface and the examination of three-day dental plaque was repeated. No statistically significant differences (p = 0.143) in the amounts of Lactobacillus spp. in the plaque collected prior to and after topical fluoridation were revealed. Fluoride rubbed in the conventional glass-ionomer cement, Ketac Molar Aplicap, did not affect the amount of Lactobacillus spp. in the dental plaque growing on this material.

Effect of Simvastatin Prodrug on Experimental Periodontitis.

PubMed

Bradley, Aaron D; Zhang, Yijia; Jia, Zhenshan; Zhao, Gang; Wang, Xiaobei; Pranke, Laura; Schmid, Marian J; Wang, Dong; Reinhardt, Richard A

2016-05-01

Local application of statins has shown potential in preventing and regenerating bone loss associated with experimental periodontitis. This study evaluates the effect of a novel simvastatin (SIM) prodrug (capable of delivering high doses to periodontitis inflammatory lesion and cells) on experimental periodontitis bone loss and inflammation. Forty mature female Sprague Dawley rats were subjected to ligature-induced experimental periodontitis between maxillary first and second molars (M1-M2). Equal groups were treated with three weekly doses of: 1) prodrug carrier alone (mPEG); 2) 0.5 mg SIM dose equivalent in carrier (SIM/SIM-mPEG); 3) 1.0 mg SIM/SIM-mPEG; 4) 1.5 mg SIM/SIM-mPEG; or 5) ligature alone. Contralateral molars served as unmanipulated controls. Four weeks after initiation of periodontitis, animals were euthanized, the M1-M2 interproximal was evaluated with microcomputed tomography and histology, and data were analyzed with one-way analysis of variance. Ligature alone caused a mean bone loss of 1.01 ± 0.06 mm from the cemento-enamel junction, whereas all doses of SIM/SIM-mPEG reduced bone loss, especially 1.5 mg SIM/SIM-mPEG (0.68 ± 0.05 mm, P <0.001), which was not statistically different from contralateral control (0.47 ± 0.06 mm). A dose of 1.5 mg SIM/SIM-mPEG also reduced percentage of neutrophils compared with carrier alone (2.0% ± 1.0% versus 5.7% ± 1.1%; P <0.05), and increased amount of uninflamed connective tissue in the M1-M2 interproximal area (65.2% ± 3.3% versus 46.3% ± 3.3%; P <0.001). The mPEG carrier alone did not have bone-sparing or anti-inflammatory properties. Multiple local 1.5-mg doses of a macromolecular SIM prodrug decreases amount of experimental periodontitis bone loss and inflammation in rats.

Third molar development: evaluation of nine tooth development registration techniques for age estimations.

PubMed

Thevissen, Patrick W; Fieuws, Steffen; Willems, Guy

2013-03-01

Multiple third molar development registration techniques exist. Therefore the aim of this study was to detect which third molar development registration technique was most promising to use as a tool for subadult age estimation. On a collection of 1199 panoramic radiographs the development of all present third molars was registered following nine different registration techniques [Gleiser, Hunt (GH); Haavikko (HV); Demirjian (DM); Raungpaka (RA); Gustafson, Koch (GK); Harris, Nortje (HN); Kullman (KU); Moorrees (MO); Cameriere (CA)]. Regression models with age as response and the third molar registration as predictor were developed for each registration technique separately. The MO technique disclosed highest R(2) (F 51%, M 45%) and lowest root mean squared error (F 3.42 years; M 3.67 years) values, but differences with other techniques were small in magnitude. The amount of stages utilized in the explored staging techniques slightly influenced the age predictions. © 2013 American Academy of Forensic Sciences.

Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study

PubMed Central

LLOYD, Adam; NAVARRETE, Geraldine; MARCHESAN, Melissa Andreia; CLEMENT, David

2016-01-01

ABSTRACT Objective This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. Material and Methods Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). Results The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p<0.001). Ca(OH)2 was similarly removed from the coronal and middle thirds with the three methods used (p>0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (p<0.001). Conclusions PIPS laser-activation was more effective for the removal of Ca(OH)2 from mesial roots of mandibular molars with Weine Type II canal configurations than PUI with EndoUltra and SNI. PMID:28076457

Dimensional changes of upper airway after rapid maxillary expansion: a prospective cone-beam computed tomography study.

PubMed

Chang, Yoon; Koenig, Lisa J; Pruszynski, Jessica E; Bradley, Thomas G; Bosio, Jose A; Liu, Dawei

2013-04-01

The aim of this prospective study was to use cone-beam computed tomography to assess the dimensional changes of the upper airway in orthodontic patients with maxillary constriction treated by rapid maxillary expansion. Fourteen orthodontic patients (mean age, 12.9 years; range, 9.7-16 years) were recruited. The patients with posterior crossbite and constricted maxilla were treated with rapid maxillary expansion as the initial part of their comprehensive orthodontic treatments. Before and after rapid maxillary expansion cone-beam computed tomography scans were taken to measure the retropalatal and retroglossal airway changes in terms of volume, and sagittal and cross-sectional areas. The transverse expansions by rapid maxillary expansion were assessed between the midlingual alveolar bone plates at the maxillary first molar and first premolar levels. The measurements of the before and after rapid maxillary expansion scans were compared by using paired t tests with the Bonferroni adjustment for multiple comparisons. After rapid maxillary expansion, significant and equal amounts of 4.8 mm of expansion were observed at the first molar (P = 0.0000) and the first premolar (P = 0.0000) levels. The width increase at the first premolar level (20.0%) was significantly greater than that at the first molar level (15.0%) (P = 0.035). As the primary outcome variable, the cross-sectional airway measured from the posterior nasal spine to basion level was the only parameter showing a significant increase of 99.4 mm(2) (59.6%) after rapid maxillary expansion (P = 0.0004). These results confirm the findings of previous studies of the effect of rapid maxillary expansion on the maxilla. Additionally, we found that only the cross-sectional area of the upper airway at the posterior nasal spine to basion level significantly gains a moderate increase after rapid maxillary expansion. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Evaluation of maillard reaction variables and their effect on heterocyclic amine formation in chemical model systems.

PubMed

Dennis, Cara; Karim, Faris; Smith, J Scott

2015-02-01

Heterocyclic amines (HCAs), highly mutagenic and potentially carcinogenic by-products, form during Maillard browning reactions, specifically in muscle-rich foods. Chemical model systems allow examination of in vitro formation of HCAs while eliminating complex matrices of meat. Limited research has evaluated the effects of Maillard reaction parameters on HCA formation. Therefore, 4 essential Maillard variables (precursors molar concentrations, water amount, sugar type, and sugar amounts) were evaluated to optimize a model system for the study of 4 HCAs: 2-amino-3-methylimidazo-[4,5-f]quinoline, 2-amino-3-methylimidazo[4,5-f]quinoxaline, 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline, and 2-amino-3,4,8-trimethyl-imidazo[4,5-f]quinoxaline. Model systems were dissolved in diethylene glycol, heated at 175 °C for 40 min, and separated using reversed-phase liquid chromatography. To define the model system, precursor amounts (threonine and creatinine) were adjusted in molar increments (0.2/0.2, 0.4/0.4, 0.6/0.6, and 0.8/0.8 mmol) and water amounts by percentage (0%, 5%, 10%, and 15%). Sugars (lactose, glucose, galactose, and fructose) were evaluated in several molar amounts proportional to threonine and creatinine (quarter, half, equi, and double). The precursor levels and amounts of sugar were significantly different (P < 0.05) in regards to total HCA formation, with 0.6/0.6/1.2 mmol producing higher levels. Water concentration and sugar type also had a significant effect (P < 0.05), with 5% water and lactose producing higher total HCA amounts. A model system containing threonine (0.6 mmol), creatinine (0.6 mmol), and glucose (1.2 mmol), with 15% water was determined to be the optimal model system with glucose and 15% water being a better representation of meat systems. © 2015 Institute of Food Technologists®

Dental and skeletal changes after intraoral molar distalization with sectional jig assembly.

PubMed

Gulati, S; Kharbanda, O P; Parkash, H

1998-09-01

The present study was conducted on 10 subjects to evaluate dental and skeletal changes after intraoral molar distalization. The maxillary molars were distalized with a sectional jig assembly. Sentalloy open coil springs were used to exert 150 gm of force for a period of 12 weeks. A modified Nance appliance was the main source of anchorage. The pre- and postdistalization records included dental study casts, clinical photographs, and cephalograms. A total of 665 readings recorded from lateral cephalograms and dental casts were subjected to statistical analysis. The mean distal movement of the first molar was 2.78 mm, which was highly significant (o < 0.001). It moved distally at the rate of 0.86 mm/month. There was clinically some distal tipping (3.50 degrees) and distopalatal rotation (2.40 degrees). These changes were statistically significant (p < 0.001). The second molars accompanied the first molars and moved distally by nearly the same amount. There was 1.00 mm increase in the overjet and 2.60 degrees mesial tip of second premolar. The changes in the facial skeleton and dentition bases were minimal and statistically not significant. However, there was clockwise rotation of the mandible of 1.30 degrees that was statistically significant. This was the result of molar extrusion (1.60 mm).

Effect of different types of dental anchorage following first premolar extraction on mandibular third molar angulation.

PubMed

Azizi, Fateme; Shahidi-Zandi, Vahid

2018-03-01

The aim of this study was to determine the effect of first premolar extraction with different anchorages as well as non-extraction on mandibular third molar angulation. The pretreatment (T1) and posttreatment (T2) panoramic radiographs of one hundred patients from Hamadan (Iran), who underwent fixed orthodontic treatment were investigated and the angle between long axis of right mandibular third molars and a constructed horizontal plan (HRP) was measured. The sample was equally divided into four groups including first premolar extraction with maximum anchorage, that with moderate anchorage, that with minimum anchorage and non-extraction group. In the first premolar extraction groups with moderate and minimum anchorages, third molar angulation increased (8.12 and 7.48°, respectively) significantly from T1 to T2 (P=0.001 and 0.003, respectively), but in the first premolar extraction group with maximum anchorage and non-extraction group, increase in third molar angulation (2.84 and 0.8°, respectively) was not statistically significant (P=0.082 and 0.943, respectively). Third molar uprighting was significantly different among four groups using one-way ANOVA (P=0.004). Tukey (HSD: honestly significant difference) post hoc test indicated that difference in third molar angulation was statistically significant between first premolar extraction group with moderate anchorage and non-extraction group (P=0.007) and also between the first premolar extraction group with minimum anchorage and non-extraction group (P=0.024). The first premolar extraction groups with moderate and minimum anchorage may lead to more chance of third molar eruption and this can be helpful in borderline cases to consider third molar angulation as one of determining indicators to decide whether to extract or not to extract first premolars. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.

42 CFR 423.780 - Premium subsidy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... amount. (b) Premium subsidy amount. (1) The premium subsidy amount is equal to the lesser of— (i) Under... beneficiary premium attributable to basic prescription drug coverage (for enrollees in MA-PD plans); or (ii..., with the weight for each PDP and MA-PD plan equal to a percentage, the numerator being equal to the...

42 CFR 423.780 - Premium subsidy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... amount. (b) Premium subsidy amount. (1) The premium subsidy amount is equal to the lesser of— (i) Under... beneficiary premium attributable to basic prescription drug coverage (for enrollees in MA-PD plans); or (ii..., with the weight for each PDP and MA-PD plan equal to a percentage, the numerator being equal to the...

42 CFR 423.780 - Premium subsidy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... amount. (b) Premium subsidy amount. (1) The premium subsidy amount is equal to the lesser of— (i) Under... beneficiary premium attributable to basic prescription drug coverage (for enrollees in MA-PD plans); or (ii..., with the weight for each PDP and MA-PD plan equal to a percentage, the numerator being equal to the...

Copolyimides prepared from ODPA, BTDA and 3,4'-ODA

NASA Technical Reports Server (NTRS)

Chang, Alice C. (Inventor); St. Clair, Terry L. (Inventor)

1996-01-01

A copolyimide was prepared by reacting 3,4'-oxydianiline (3,4'-ODA) with a dianhydride blend comprising, based on the total amount of the dianhydride blend, about 67 to 80 mole percent of 4,4'-oxydiphthalic anhydride (ODPA) and about 20 to 33 mole percent of 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BTDA). The copolyimide may be endcapped with up to about 10 mole percent of a monofunctional aromatic anhydride and has unbalanced stoichiometry such that a molar deficit in the dianhydride blend is compensated with twice the molar amount of the monofunctional aromatic anhydride. The copolyimide was used to prepare composites, films and adhesives. The film and adhesive properties were significantly better than those of LaRC.TM.-IA.

Removal of lead by apatite and its stability in the presence of organic acids.

PubMed

Katoh, Masahiko; Makimura, Akihiko; Sato, Takeshi

2016-12-01

In this study, lead sorption and desorption tests were conducted with apatite and organic acids (i.e. citric, malic, and formic acids) to understand lead removal by apatite in the presence of an organic acid and lead dissolution from the lead- and organic-acid-sorbed apatite by such organic acid exposure. The lead sorption test showed that the amount of lead removed by apatite in the presence of organic acid varied depending on the type of acid used. The molar amounts of calcium dissolved from apatite in the presence and absence of organic acid were exactly the same as those of lead removed even under different pH conditions as well as different organic acid concentrations, indicating that the varying amount of lead removal in the presence of different organic acids resulted from the magnitude of the dissolution of apatite and the precipitation of lead phosphate minerals. The percentages of lead dissolved from the organic-acid-sorbed and non-organic-acid-sorbed apatite by all the organic acid extractions were equal and higher than those by water extraction. In particular, the highest extractions were observed in the non-organic-acid-sorbed apatite by citric and malic acids. These results suggest that to immobilize lead by the use of apatite in the presence of organic acids, much more apatite must be added than in the absence of organic acid, and that measures must be taken to ensure that the immobilized lead is not dissolved.

Organic-Free, ZnO-Assisted Synthesis of Zeolite FAU with Tunable SiO2 /Al2 O3 Molar Ratio.

PubMed

Guo, Ya; Sun, Tianjun; Gu, Yiming; Liu, Xiaowei; Ke, Quanli; Wang, Shudong

2018-05-04

Zeolite FAU with tunable SiO 2 /Al 2 O 3 molar ratio has been successfully synthesized in the absence of organic structure-directing agents (OSDA). Specifically, the addition of zinc species contributes to the feasible and effective adjustment of the framework SiO 2 /Al 2 O 3 molar ratio between about 4 and 6 depending on the amount of zinc species added in the batch composition. In contrast, a typical OSDA such as tetramethylammonium hydroxide (TMAOH) has a limited effect on the SiO 2 /Al 2 O 3 molar ratio of the zeolite. The role of zinc species is essential for the crystallization of zeolite FAU with a higher SiO 2 /Al 2 O 3 molar ratio under the particular synthesis conditions. It is speculated that zinc species may suppress the incorporation of aluminum into the aluminosilicate framework, which is due to the Coulombic repulsive interaction. A higher SiO 2 /Al 2 O 3 molar ratio is also found to be accompanied by a lower CO 2 adsorption heat for CO 2 /CH 4 separation. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

MIH: epidemiologic clinic study in paediatric patient

PubMed Central

CONDÒ, R.; PERUGIA, C.; MATURO, P.; DOCIMO, R.

2012-01-01

SUMMARY The Molar Incisor Hypomineralization (MIH) is a qualitative and quantitative defect of the enamel structure of the first permanent molars, which may vary from 1 to 4 with involvement of maxillary and jaw permanent incisors. Aim. Aim of this study is that to evaluate, among 1500 paediatric patients chosen at random aged between 0 and 14 years, afferent by the Paediatric Dentistry of the Azienda Ospedialiera Policlinico Tor Vergata of Rome from 1996 to 2011, the incidents and the prevalence of the MIH distribution, and furthermore to ascertain the possible relationship with the data described in the literature. Results and discussion. From the sample of 1500 paediatric patients, the number of those affections from MIH has turned out to be pairs to 110 (7.3%) aged between 4 and 15 years, and an average age equal to 9.7. The incidence of the hypoplastic defects is greater in the elements of the permanents series in which the functional class mainly interested is that of the first molars, with a percentage of 39.8%. Regarding the elements of the deciduous series affections from hypoplasia, they turn out to be in all in number of 20 represented in 80% of the cases from the seconds molars while in the remaining 20% of the cases the items involved are the central incisors. About the percentage of elements involved in the MIH: the molars, involved with a frequency of 56%, turn out to be more hit regarding incisors (44%). As reported in the literature, it can be asserted that the MIH can hit in equal measure both the male sex that feminine one. Conclusions. MIH represents a condition quite frequent in the paediatric population. In managing this anomaly takes an essential role in the early diagnosis and in the differential one. The study done underlined the importance of a correct application of the therapeutic protocol which, starting from a careful diagnosis and articulating themselves in the execution of preventive treatments and in severe cases restorative and prosthetic, has the aim to certify the functionality and the aesthetic of the dental elements affected by MIH. PMID:23285408

MIH: epidemiologic clinic study in paediatric patient.

PubMed

Condò, R; Perugia, C; Maturo, P; Docimo, R

2012-04-01

The Molar Incisor Hypomineralization (MIH) is a qualitative and quantitative defect of the enamel structure of the first permanent molars, which may vary from 1 to 4 with involvement of maxillary and jaw permanent incisors. AIM.: Aim of this study is that to evaluate, among 1500 paediatric patients chosen at random aged between 0 and 14 years, afferent by the Paediatric Dentistry of the Azienda Ospedialiera Policlinico Tor Vergata of Rome from 1996 to 2011, the incidents and the prevalence of the MIH distribution, and furthermore to ascertain the possible relationship with the data described in the literature. RESULTS AND DISCUSSION.: From the sample of 1500 paediatric patients, the number of those affections from MIH has turned out to be pairs to 110 (7.3%) aged between 4 and 15 years, and an average age equal to 9.7. The incidence of the hypoplastic defects is greater in the elements of the permanents series in which the functional class mainly interested is that of the first molars, with a percentage of 39.8%. Regarding the elements of the deciduous series affections from hypoplasia, they turn out to be in all in number of 20 represented in 80% of the cases from the seconds molars while in the remaining 20% of the cases the items involved are the central incisors. About the percentage of elements involved in the MIH: the molars, involved with a frequency of 56%, turn out to be more hit regarding incisors (44%). As reported in the literature, it can be asserted that the MIH can hit in equal measure both the male sex that feminine one. CONCLUSIONS.: MIH represents a condition quite frequent in the paediatric population. In managing this anomaly takes an essential role in the early diagnosis and in the differential one. The study done underlined the importance of a correct application of the therapeutic protocol which, starting from a careful diagnosis and articulating themselves in the execution of preventive treatments and in severe cases restorative and prosthetic, has the aim to certify the functionality and the aesthetic of the dental elements affected by MIH.

Effectiveness of cold therapy in reducing pain, trismus, and oedema after impacted mandibular third molar surgery: a randomized, self-controlled, observer-blind, split-mouth clinical trial.

PubMed

Zandi, M; Amini, P; Keshavarz, A

2016-01-01

Cold therapy is a conventional and widely used modality for reducing pain, trismus, and oedema after dentoalveolar surgeries. However, information reported in the literature on its effectiveness is insufficient and controversial. This study was performed to evaluate the effect of local cold application in reducing pain, trismus, and swelling after impacted mandibular third molar surgery. Thirty patients (seven males and 23 females) with bilateral symmetrical mandibular impacted third molars were enrolled in this randomized, self-controlled, observer-blind clinical trial. The patients were aged between 18 and 30 years. After surgical removal of the tooth on one side (intervention), ice pack therapy was given for 24h after surgery; for the other side (control), no cold therapy was given. The time interval between the two surgeries was at least 4 weeks. The amount of pain, trismus, and facial swelling was measured on days 2 and 7 postoperative, and patient satisfaction with the cold therapy vs. no cold therapy was assessed. The amount of pain, trismus, and facial swelling, and the extent of patient satisfaction were not significantly different between the intervention and control sides. Cold therapy had no beneficial effects on postoperative sequelae after impacted mandibular third molar surgery. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

The Compound of Mangiferin-Berberine Salt Has Potent Activities in Modulating Lipid and Glucose Metabolisms in HepG2 Cells

PubMed Central

Wang, Can; Jiang, Jian-Dong; Wu, Wei; Kong, Wei-Jia

2016-01-01

The mangiferin-berberine (MB) salt was synthesized by ionic bonding of mangiferin (M) and berberine (B) at an equal molecular ratio. This study aimed to investigate the activities of MB salt in modulating lipid and glucose metabolisms in HepG2 cells. After 24 h treatment of the studying compounds, cellular AMP-activated protein kinase α (AMPKα)/acetyl-CoA carboxylase (ACC) protein levels and carnitine palmitoyltransferase (CPT) 1 activities, intracellular lipid contents, mRNA expression levels of target genes, glucose consumption, and glucose production amounts were determined. Compound C (CC) was used in the blocking experiments. Our results showed that MB salt increased p-AMPKα (Thr172)/p-ACC (Ser79) levels and CPT1 activity and suppressed oleic acid- (OA-) induced lipid accumulation and upregulation of lipogenic genes potently in HepG2 cells. The above activities of MB salt were AMPK dependent and were superior to those of M or B when administered at an equal molar concentration. MB salt enhanced basal and insulin-stimulated glucose consumption and suppressed gluconeogenesis more potently than M or B alone. The inhibiting activity of MB salt on cellular gluconeogenesis was AMPK dependent. Our results may support MB salt as a new kind of agent for the development of novel lipid or glucose-lowering drugs in the future. PMID:27123455

Forensic age estimation based on development of third molars: a staging technique for magnetic resonance imaging.

PubMed

De Tobel, J; Phlypo, I; Fieuws, S; Politis, C; Verstraete, K L; Thevissen, P W

2017-12-01

The development of third molars can be evaluated with medical imaging to estimate age in subadults. The appearance of third molars on magnetic resonance imaging (MRI) differs greatly from that on radiographs. Therefore a specific staging technique is necessary to classify third molar development on MRI and to apply it for age estimation. To develop a specific staging technique to register third molar development on MRI and to evaluate its performance for age estimation in subadults. Using 3T MRI in three planes, all third molars were evaluated in 309 healthy Caucasian participants from 14 to 26 years old. According to the appearance of the developing third molars on MRI, descriptive criteria and schematic representations were established to define a specific staging technique. Two observers, with different levels of experience, staged all third molars independently with the developed technique. Intra- and inter-observer agreement were calculated. The data were imported in a Bayesian model for age estimation as described by Fieuws et al. (2016). This approach adequately handles correlation between age indicators and missing age indicators. It was used to calculate a point estimate and a prediction interval of the estimated age. Observed age minus predicted age was calculated, reflecting the error of the estimate. One-hundred and sixty-six third molars were agenetic. Five percent (51/1096) of upper third molars and 7% (70/1044) of lower third molars were not assessable. Kappa for inter-observer agreement ranged from 0.76 to 0.80. For intra-observer agreement kappa ranged from 0.80 to 0.89. However, two stage differences between observers or between staging sessions occurred in up to 2.2% (20/899) of assessments, probably due to a learning effect. Using the Bayesian model for age estimation, a mean absolute error of 2.0 years in females and 1.7 years in males was obtained. Root mean squared error equalled 2.38 years and 2.06 years respectively. The performance to discern minors from adults was better for males than for females, with specificities of 96% and 73% respectively. Age estimations based on the proposed staging method for third molars on MRI showed comparable reproducibility and performance as the established methods based on radiographs.

Clinical Evaluation of Ozone on Dentinal Lesions in Young Permanent Molars using the Stepwise Excavation.

PubMed

Safwat, Osama; Elkateb, Mona; Dowidar, Karin; El Meligy, Omar

To evaluate the clinical changes in dentin of deep carious lesions in young permanent molars, following ozone application with and without the use of a remineralizing solution, using the stepwise excavation. The sample included 162 first permanent immature molars, showing deep occlusal carious cavities that were indicated for indirect pulp capping. Teeth were divided into 2 main groups according to the method of ozone treatment. Each group was further subdivided equally into test and control subgroups. Following caries excavation, color, consistency and DIAGNOdent assessments of dentin were evaluated after 6 and 12 months. Regarding dentin color and consistency, no significant differences were observed following ozone application, with and without a remineralizing solution. There were no significant differences between ozone treatment, and calcium hydroxide during the different evaluation periods, except in group I cases after 6 months, concerning the dentin color. The DIAGNOdent values were significantly reduced following ozone application, with or without a remineralizing solution, as well as between test and control cases in group I after 6 months. Ozone application through the stepwise excavation had no significant effect on dentin color and consistency in young permanent molars. DIAGNOdent was unreliable in monitoring caries activity.

The effect of informed consent on stress levels associated with extraction of impacted mandibular third molars.

PubMed

Casap, Nardy; Alterman, Michael; Sharon, Guy; Samuni, Yuval

2008-05-01

To evaluate the effect of informed consent on stress levels associated with removal of impacted mandibular third molars. A total of 60 patients scheduled for extraction of impacted mandibular third molars participated in this study. The patients were unaware of the study's objectives. Data from 20 patients established the baseline levels of electrodermal activity (EDA). The remaining 40 patients were randomly assigned into 2 equal groups receiving either a detailed document of informed consent, disclosing the possible risks involved with the surgery, or a simplified version. Pulse, blood pressure, and EDA were monitored before, during, and after completion of the consent document. Changes in EDA, but not in blood pressure, were measured on completion of either version of the consent document. A greater increase in EDA was associated with the detailed version of the consent document (P = .004). A similar concomitant increase (although nonsignificant) in pulse values was monitored on completion of both versions. Completion of overdisclosed document of informed consent is associated with changes in physiological parameters. The results suggest that overdetailed listing and disclosure before extraction of impacted mandibular third molars can increase patient stress.

Piezosurgery vs High Speed Rotary Handpiece: a comparison between the two techniques in the impacted third molar surgery

PubMed Central

BARTULI, F.N.; LUCIANI, F.; CADDEO, F.; DE CHIARA, L.; DI DIO, M.; PIVA, P.; OTTRIA, L.; ARCURI, C.

2013-01-01

SUMMARY Objective The aim of the Study was to compare the impacted third molar surgical technique by means of the high speed rotary handpiece with the piezoelectric one. Materials and Methods 192 patients have been selected among those who had to undergo a third molar surgical extraction. These patients’ surgeries have been performed by means of one of the techniques, randomly chosen. Each patient has undergone the same analgesic therapy (paracetamol 1000 mg tablets). Each surgery has been performed by the same surgeon. The patients were asked to fill in a questionnaire concerning the postoperative pain (“happy face pain” rating scale). Results The average duration of the surgeries performed by means of the high speed rotary handpiece was 32 minutes, while the duration of the ones performed by means of the piezoelectric handpiece was much longer (54 minutes). The postoperative pain values were almost equal. Conclusions In conclusion, the osteotomy performed by means of the traditional technique still represents the gold standard in the impacted third molar surgery. The piezoelectric technique may be an effective choice, especially for the less skilled surgeons, in order to guarantee the protection of the delicate locoregional anatomical structures. PMID:23991279

Piezosurgery vs High Speed Rotary Handpiece: a comparison between the two techniques in the impacted third molar surgery.

PubMed

Bartuli, F N; Luciani, F; Caddeo, F; DE Chiara, L; DI Dio, M; Piva, P; Ottria, L; Arcuri, C

2013-01-01

The aim of the Study was to compare the impacted third molar surgical technique by means of the high speed rotary handpiece with the piezoelectric one. 192 patients have been selected among those who had to undergo a third molar surgical extraction. These patients' surgeries have been performed by means of one of the techniques, randomly chosen. Each patient has undergone the same analgesic therapy (paracetamol 1000 mg tablets). Each surgery has been performed by the same surgeon. The patients were asked to fill in a questionnaire concerning the postoperative pain ("happy face pain" rating scale). The average duration of the surgeries performed by means of the high speed rotary handpiece was 32 minutes, while the duration of the ones performed by means of the piezoelectric handpiece was much longer (54 minutes). The postoperative pain values were almost equal. In conclusion, the osteotomy performed by means of the traditional technique still represents the gold standard in the impacted third molar surgery. The piezoelectric technique may be an effective choice, especially for the less skilled surgeons, in order to guarantee the protection of the delicate locoregional anatomical structures.

The efficacy of hyaluronic acid in postextraction sockets of impacted third molars: A pilot study.

PubMed

Yilmaz, N; Demirtas, N; Kazancioglu, H O; Bayer, S; Acar, A H; Mihmanli, A

2017-12-01

This study aims to evaluate the effectiveness of local hyaluronic acid (HA) administration to surgically remove impacted third molar sockets and measure pain, swelling, and trismus. The study included a total of 25 healthy patients aged 18-29 years with asymptomatic bilaterally impacted lower third molars. All cases have been performed under local anesthesia. In the study group, 0.8% HA (Gengigel®) was applied in the postextraction sockets of the right third molars and in the control group nothing was applied to the extraction sockets of the left third molars. Postoperative pain, trismus, and swelling were evaluated on the 1st, 3rd, and 7th postoperative days. No difference was determined between groups in facial swelling and maximum mouth opening. However, the amount of pain significantly reduced in HA groups according to visual analog scale (P = 0.001). The results of this study showed that HA can produce an analgesic action in postextraction sockets after surgical removal of impacted teeth and therefore it has a clinical benefit to reduce usage of nonsteroidal anti-inflammatory drugs after dentoalveolar surgery.

The assessment of surface roughness and microleakage of eroded tooth-colored dental restorative materials

PubMed Central

Hussein, Thulfiqar Ali; Bakar, Wan Zaripah Wan; Ghani, Zuryati Ab; Mohamad, Dasmawati

2014-01-01

Objectives: To investigate the effect of acidic solution on surface roughness and microleakage of tooth-colored restorative materials. Materials and Methods: A 160 box-shaped cavities were prepared on the buccal surfaces of 160 human molars, and assigned to four groups: Group A restored with Ketac™ Molar Easymix, Group B with Fuji II™ LC, Group C with Ketac™ N100, and Group D with Filtek™ Z250, and subdivided into study and control groups (n = 20). Study groups were immersed in lemon juice (pH = 2.79) for 24 h, whilst controlgroups in deionized distilled water. All samples were immersed in 2% methylene blue dye, sectioned into two equal halves for surface roughness, and microleakage tests. Data were analyzed using Mann–Whitney and Kruskal–Wallis tests at P < 0.05. Results: There was a significant difference in surface roughness of Ketac™ Molar, Fuji II™ LC, and Ketac™ N100. No significant difference was found in microleakage of Ketac™ Molar and Fuji II™ LC; however, there were significant differences in the gingival margin of Ketac™ N100, and the occlusal margin of Filtek™ Z250. Conclusions: All glass ionomer cements were eroded after exposure to the acidic drink. Filtek™ Z250 and Ketac™ Molar Easymix showed more microleakage. All materials showed more microleakage at the gingival margins. PMID:25506139

[Surgery of lower third molars and lesions of the lingual nerve].

PubMed

Chiapasco, M; Pedrinazzi, M; Motta, J; Crescentini, M; Ramundo, G

1996-11-01

The authors describe a technical expedient applied during the removal of totally or partially impacted lower third molars, in order to prevent lingual nerve damage. EXPERIMENTAL ASSAY: Retrospective study. The sample includes 1835 extractions of totally or partially impacted lower third molars, performed on 1030 patients, 493 males and 537 females, aging between 12 and 72 years. All the operations were carried out under local anaesthesia with standardization of the surgical protocol. A mucoperiosteal paramarginal flap was used in case of germectomy, whereas a mucoperiosteal marginal flap with mesial releasing incision was used in case of fully mature teeth. Ostectomy and tooth sectioning were performed using a round and fissure bur respectively, assembled on a straight low-speed handpiece and under irrigation with sterile saline. The authors reported only one case of transient lingual nerve paresthesia (0.05%) which occurred in a 19-years old female presenting a totally impacted third molar mesial-lingual inclination. Symptoms disappeared spontaneously one week postoperatively. Therefore the overall incidence of permanent nerve damage was equal to 0%. The data reported in literature show a lingual nerve lesion incidence ranging between 0% and 22%. With this simple surgical expedient the incidence of permanent lingual damage was 0%. Thus, it is the authors' opinion that this simple expedient should be applied in all cases of impacted third molar removal.

Lipase-catalyzed synthesis of fattythioic acids from palm oil.

PubMed

Al-Mulla, Emad A Jaffar

2011-01-01

The present work focuses on the synthesis of fattythioic acids (FTAs) by a one-step lipase catalyzed reaction of palm oil with carbonothioic S,S-acid using Lipozyme. The product was characterized using Fourier transform infrared (FTIR) spectroscopy, proton nuclear magnetic resonance ((1)H NMR) technique and elemental analysis. The effects of various reaction parameters such as reaction time, temperature, amount of enzyme, molar ratio of substrates, and various organic solvents of the reaction system were investigated. The optimum conditions to produce FTAs were respectively, incubation time, 20 h, temperature, 40°C, amount of enzyme, 0.05 g and molar ratio of carbonothioic S,S-acid to palm oil, 5.0:1.0. Hexane was the best solvent for this reaction. The conversion of the products at optimum conditions was around 91%.

Creatinine and HMH (5-hydroxy-1-methylhydantoin, NZ-419) as intrinsic hydroxyl radical scavengers.

PubMed

Ienaga, K; Yokozawa, T

2011-08-01

Creatinine (Crn) is one of the main intrinsic hydroxyl radical (•OH) scavengers and an ideal one for healthy or normal mammals, although this fact has not yet become widely accepted. Our results from urinary data estimated that ca. 0.4-0.6% of Crn is used daily to scavenge •OH in normal mammals [ca. 50 μmole and ca. 400 pmole of •OH in healthy subjects and normal rats, respectively]. In human subjects, Crn reacts non-enzymatically with •OH to form creatol (CTL: 5-hydroxycreatinine) and demethylcreatinine (DMC) in a one to one ratio, and CTL partially decomposes to methylguanidine (MG). And so, the scavenged mole of •OH by Crn is nearly equal to their molar total sum (CTL + MG + DMC) or 2 × (CTL + MG). The molar ratio of (scavenged •OH)/Crn in healthy subjects and normal rats are 4.4 and 6.0 mmole/mole, respectively, i.e. almost similar, but in patients with chronic kidney disease (CKD) the ratio increases up to ca. 60 mmole/mole in proportion to the severity of CKD. Since the level of Crn might not be enough to scavenge all •OH, and MG starts accumulating as a uremic toxin, Crn is not really the ideal scavenger. 5-Hydroxy-1-methylhydantoin (HMH, NZ-419), a Crn metabolite, is another antioxidant, having •OH scavenging ability, and has been shown to inhibit the progression of CKD in rats in stead of Crn, if sufficient amounts are given orally.

Modeling snail breeding in Bioregenerative Life Support System

NASA Astrophysics Data System (ADS)

Kovalev, Vladimir; Tikhomirov, Alexander A.; Nickolay Manukovsky, D..

It is known that snail meat is a high quality food that is rich in protein. Hence, heliciculture or land snail farming spreads worldwide because it is a profitable business. The possibility to use the snails of Helix pomatia in Biological Life Support System (BLSS) was studied by Japanese Researches. In that study land snails were considered to be producers of animal protein. Also, snail breeding was an important part of waste processing, because snails were capable to eat the inedible plant biomass. As opposed to the agricultural snail farming, heliciculture in BLSS should be more carefully planned. The purpose of our work was to develop a model for snail breeding in BLSS that can predict mass flow rates in and out of snail facility. There are three linked parts in the model called “Stoichiometry”, “Population” and “Mass balance”, which are used in turn. Snail population is divided into 12 age groups from oviposition to one year. In the submodel “Stoichiometry” the individual snail growth and metabolism in each of 12 age groups are described with stoichiometry equations. Reactants are written on the left side of the equations, while products are written on the right side. Stoichiometry formulas of reactants and products consist of four chemical elements: C, H, O, N. The reactants are feed and oxygen, products are carbon dioxide, metabolic water, snail meat, shell, feces, slime and eggs. If formulas of substances in the stoichiometry equations are substituted with their molar masses, then stoichiometry equations are transformed to the equations of molar mass balance. To get the real mass balance of individual snail growth and metabolism one should multiply the value of each molar mass in the equations on the scale parameter, which is the ratio between mass of monthly consumed feed and molar mass of feed. Mass of monthly consumed feed and stoichiometry coefficients of formulas of meat, shell, feces, slime and eggs should be determined experimentally. An age structure and size of snail population are optimized on the base of individual growth and metabolic characteristics with the help of the second submodel "Population". In this simulation a daily amount of snail meat consumed by crewmembers is a guideline which specifies population productivity. Also, the daily amount of snail meat may have an optional value. Prescribed population characteristics are used in the third submodel "Mass balance" to equalize input and output mass flow rates of snail facility. In this submodel we add a water and ash to the organic masses of feed, meat, feces, shell and eggs. Moreover, masses of calcium carbonate and potable water are added to the left side of mass balance equations. Mass of calcium carbonate is distributed among shell, feces and eggs. Summarizing the twelve equations for each snail age, we get the mass balance equation for the snail facility. All simulations are performed by using Solver Add-In for Excel 2007.

LEGO-Method--New Strategy for Chemistry Calculation

ERIC Educational Resources Information Center

Molnar, Jozsef; Molnar-Hamvas, Livia

2011-01-01

The presented strategy of chemistry calculation is based on mole-concept, but it uses only one fundamental relationship of the amounts of substance as a basic panel. The name of LEGO-method comes from the famous toy of LEGO[R] because solving equations by grouping formulas is similar to that. The relations of mole and the molar amounts, as small…

Correlation of antibiotic prophylaxis and difficulty of extraction with postoperative inflammatory complications in the lower third molar surgery.

PubMed

Lee, J Y; Do, H S; Lim, J H; Jang, H S; Rim, J S; Kwon, J J; Lee, E S

2014-01-01

Our aim was to investigate the correlation among antibiotic prophylaxis, difficulty of extraction, and postoperative complications in the removal of lower 3rd molars. A total of 1222 such extractions in 890 patients between January 2010 and January 2012 were analysed retrospectively. The difficulty of extraction measured by Pederson's index, antibiotic prophylaxis with cefditoren, and postoperative complications were recorded. The difficulty of extraction was significantly associated with postoperative complications (p=0.03). There were no significant associations between antibiotic prophylaxis and postoperative complications in groups of equal difficulty ("easy" group (class I) p=1.00; "moderate" group (class II) p=1.00; and "difficult" group (class III) p=0.65). There was a small but insignificant increase in the number of dry sockets and infections in class III cases. In conclusion, this study provides further evidence that antibiotic prophylaxis for the prevention of postoperative inflammatory complications is unnecessary for extraction of 3rd molars. Copyright © 2013. Published by Elsevier Ltd.

A finite element analysis of the optimal bending angles in a running loop for mesial translation of a mandibular molar using indirect skeletal anchorage.

PubMed

Kim, M-J; Park, J H; Kojima, Y; Tai, K; Chae, J-M

2018-02-01

To estimate the optimal bending angles in the running loop for mesial translation of a mandibular second molar using indirect skeletal anchorage and to clarify the mechanics of tipping and rotating the molar. A three-dimensional finite element model was developed for predicting tooth movement, and a mechanical model based on the beam theory was constructed for clarifying the force systems. When using a running loop without bends, the molar tipped mesially 14.4° and lingually 0.6°, rotated counterclockwise 4.1°, and the incisors retracted 0.02 mm and intruded 0.05 mm. These angles were about the same as those estimated by the beam theory. When the amount of tip back and toe-in angles was 11.0°, mesial translation of the molar was achieved, and incisors retracted 0.10 mm and intruded 0.30 mm. Mesial translation of a mandibular second molar without any significant movement of anterior teeth was achieved during protraction by controlling the tip back and toe-in angles and enhancing anterior anchorage with the combined use of a running loop and indirect skeletal anchorage. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Evaluation of maxillary molar distalization with the distal jet: a comparison with other contemporary methods.

PubMed

Bolla, Eugenio; Muratore, Filippo; Carano, Aldo; Bowman, S Jay

2002-10-01

Maxillary molar distalization is an increasingly popular option for the resolution of Class II malocclusions. This communication describes the effects of one particular molar distalizing appliance, the distal jet, in a sample of 20 consecutively treated and growing subjects (11 females, nine males; mean starting age of 13) and compares these effects with those of similar devices. Pre- and postdistalization cephalometric radiographs and dental models were analyzed to determine the dental and skeletal effects. The distal jet appliances were constructed using a biomechanical couple to direct the distalizing force to the level of the maxillary first molar's center of resistance. The distal jet was the only appliance used during the distalization phase of treatment. Examination of the cephalometric tracings demonstrated that the crowns of the maxillary first molars were distalized an average of 3.2 mm into a Class I molar relationship. In the process, the first molars were tipped distally an average of 3.1 degrees, however, the amount of tipping in each case was influenced by the state of eruption of the second molar. In subjects whose second molars had erupted only to the level of the apical third of the first molar roots, distal tipping was almost twice that seen when the second molar had completed their eruption. Anchorage loss measured at the first premolars averaged 1.3 mm, but the crowns tipped 3.1 degrees distally because of the design of the appliance. The maxillary incisors were proclined an average of 0.6 degrees with minimal effect on the mandibular plane angle and lower facial height. This study suggests that the distal jet appliance effectively moves the maxillary molars distally into a Class I molar relationship with minimal distal tipping, however, some loss of anchorage is to be expected during this process. The distal jet appliance compares favorably with other intraoral distalization devices and with mechanics featuring mandibular protraction for the resolution of patients with Class II, despite the fact that these types of mechanics address different jaws.

24 CFR 235.204 - Amount of annual MIP.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and Obligations-Homes for Lower Income Families § 235.204 Amount of annual MIP. (a) With respect to... an annual MIP shall be paid in an amount equal to one-half percent of the average outstanding... be paid in an amount equal to seven-tenths of one percent of the average outstanding principal...

24 CFR 235.204 - Amount of annual MIP.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and Obligations-Homes for Lower Income Families § 235.204 Amount of annual MIP. (a) With respect to... an annual MIP shall be paid in an amount equal to one-half percent of the average outstanding... be paid in an amount equal to seven-tenths of one percent of the average outstanding principal...

24 CFR 235.202 - Amount of initial MIP.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and Obligations-Homes for Lower Income Families § 235.202 Amount of initial MIP. (a) With respect to... amount equal to one-half percent of the average outstanding principal obligation for the first year of... shall be in an amount equal to seven-tenths of one percent of the average outstanding principal...

24 CFR 235.202 - Amount of initial MIP.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and Obligations-Homes for Lower Income Families § 235.202 Amount of initial MIP. (a) With respect to... amount equal to one-half percent of the average outstanding principal obligation for the first year of... shall be in an amount equal to seven-tenths of one percent of the average outstanding principal...

24 CFR 570.705 - Loan requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... year in an aggregate amount equal to 50 percent of the amount approved in an appropriation act for that... with the private sector financing of the debt obligations. Such costs are payable out of the guaranteed... the public entity would thereby exceed an amount equal to five times the amount of the most recent...

Barium recovery by crystallization in a fluidized-bed reactor: effects of pH, Ba/P molar ratio and seed.

PubMed

Su, Chia-Chi; Reano, Resmond L; Dalida, Maria Lourdes P; Lu, Ming-Chun

2014-06-01

The effects of process conditions, including upward velocity inside the column, the amount of added seed and seed size, the pH value of the precipitant or the phosphate stream and the Ba/P molar ratio in a fluidized-bed reactor (FBR) were studied with a view to producing BaHPO₄ crystals of significant size and maximize the removal of barium. XRD were used to identify the products that were collected from the FBR. Experimental results show that an upward velocity of 48 cmmin(-1) produced the largest BaHPO₄ crystals with a size of around 0.84-1.0mm. The addition of seed crystals has no effect on barium removal. The use of a seed of a size in the ranges unseeded<0.149-0.29 mm<0.149 mm<0.29-0.42 mm produced increasing amounts of increasingly large crystals. The largest BaHPO₄ crystals were obtained at pH 8.4-8.8 with a Ba/P molar ratio of 1.0. In the homogeneous and heterogeneous processes, around 98% of barium was removed at pH 8.4-8.6 and [Ba]/[P]=1.0. The XRD results show that a significant amount of barium phosphate (Ba₃(PO₄)₂) was obtained at pH 11. The compounds BaHPO₄ and BaO were present at a pH of below 10. Copyright © 2014 Elsevier Ltd. All rights reserved.

Maxillary Nine-year Molars: Prevalence and Associated Dental and Medical Conditions.

PubMed

Klein, Ulrich; Alford, Jacqueline A; Allshouse, Amanda A; Sain, Joel

2016-01-01

The purpose of this study was to determine, from a large number of panoramic images taken in the clinic of a pediatric dentistry residency program, the prevalence of maxillary nine-year molars (9YM), associated medical conditions (MCs), and the presence of coexisting tooth anomalies (TAs). Pantomograms from 13,140 patients were searched for 9YM. Radiographs from identified subjects were examined for coexisting TAs, and charted MCs were noted. For identified 9YM, Nolla's stage of tooth formation was determined and the subjects' dental ages were calculated. Among 53 subjects (68 percent females), 21 unilateral and 32 bilateral cases of 9YM occurred. Females and males were of similar age (7.98 versus 7.91 years old). Overall dental and chronological ages were significantly different: dental development in bilateral cases was delayed by 4.1 months in females and 2.9 months in both sexes (P=.003). In unilateral cases, it was accelerated by 3.6 months in females and 3.5 months in males. The specific tooth age for all 9YM was 4.95 years for females and 5.56 years for males (P=.018). The average count of associated findings (e.g., missing teeth, peg laterals, other TAs, and other eruption delays) was 0.62 in unilateral and 1.44 in bilateral cases (P=.02). Commonly associated MCs included clefting (N equals five), and Down syndrome (n equals three). The prevalence of nine-year molars was one in 248 (0.4 percent), and the average delay in dental development was 2.7 years.

Radiolabeling of a cyclic RGD (cyclo Arg-Gly-Asp-d-Tyr-Lys) peptide using sodium hypochlorite as an oxidizing agent.

PubMed

Doll, Stephanie; Woolum, Karen; Kumar, Krishan

2016-09-01

A simple and rapid nonradioactive iodide labeling/radiolabeling method for peptides, using an inexpensive oxidizing agent such as sodium hypochlorite and a cyclic peptide, cRGDyK (cyclo Arg-Gly-Asp-d-Tyr-Lys), was developed in this work. Labeling reaction was optimized by conducting experiments under variable ratios of the reagents, the reaction times, and the pH. The study demonstrated that radiolabeling of the cyclic peptide was fast and pH independent. Monoiodinated and di-iodinated cRGDyK were formed under all conditions and varied with the ratio of the reagents and the reaction time. Total percent of the iodinated cRGDyK (monoiodinated and di-iodinated cRGDyK) varied between 44 and 100 depending on the reaction conditions. Excess cyclic peptide over equal molar ratio of sodium iodide and sodium hypochlorite yielded in predominant amounts of monoiodinated cRGDyK, ie, >60% under 2:1:1 ratio and ~88% under 5:1:1 ratio of cRGDyK:sodium iodide:sodium hypochlorite. Copyright © 2016 John Wiley & Sons, Ltd.

Trona-enhanced steam foam oil recovery process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lau, H.C.

1988-03-01

In a process in which steam and steam-foaming surfactant are injected into a subterranean reservoir for displacing a relatively acidic oil toward a production location, which process includes injecting into the reservoir, at least as soon as at least some portion of the steam is injected, (a) a kind and amount of water soluble, alkaline material effective for ion-exchanging multivalent ions from the reservoir rocks and precipitating compounds containing those ions and for causing the aqueous liquid phase of the injected fluid to form soaps of substantially all of the petroleum acids in the reservoir oil, and (b) at leastmore » one surfactant arranged for foaming the steam and providing a preformed cosurfactant material capable of increasing the salinity requirement of an aqueous surfactant system in which soaps derived from the reservoir oil comprise a primary surfactant, an improvement is described comprising: using as the water soluble alkaline material, a material consisting essentially of a substantially equal molar mixture of alkali metal carbonates and bicarbonates which is, or is substantially equivalent to, trona.« less

Production of medium chain fatty acid rich mustard oil using packed bed bioreactor.

PubMed

Sengupta, Avery; Roy, Susmita; Mukherjee, Sohini; Ghosh, Mahua

2015-01-01

A comparative study was done on the production of different medium chain fatty acid (MCFA) rich mustard oil using a stirred tank batchreactor (STBR) and packed bed bio reactor (PBBR) using three commercially available immobilised lipases viz. Thermomyces lanuginosus, Candida antarctica and Rhizomucor meihe. Three different MCFAs capric, caprylic and lauric acids were incorporated in the mustard oil. Reaction parameters, such as substrate molar ratio, reaction temperature and enzyme concentration were standardized in the STBR and maintained in the PBBR. To provide equal time of residence between the substrate and enzyme in both the reactors for the same amount of substrates, the substrate flow rate in the PBBR was maintainedat 0.27 ml/min. Gas liquid chromatography was used to monitor the incorporation of MCFA in mustard oil. The study showed that the PBBR was more efficient than the STBR in the synthesis of structured lipids with less migration of acyl groups. The physico-chemical parameters of the product along with fatty acid composition in all positions and sn-2 positions were also determined.

Extracellular Matrix-mediated Tissue Remodeling Following Axial Movement of Teeth

PubMed Central

Luan, Xianghong; Ito, Yoshihiro; Holliday, Sean; Walker, Cameron; Daniel, Jon; Galang, Therese M.; Fukui, Tadayoshi; Yamane, Akira; Begole, Ellen; Evans, Carla; Diekwisch, Thomas G.H.

2007-01-01

SUMMARY Tooth eruption is a multifactorial process involving movement of existing tissues and formation of new tissues coordinated by a complex set of genetic events. We have used the model of the unopposed rodent molar to study morphological and genetic mechanisms involved in axial movement of teeth. Following extraction of opposing upper molars, lower molars supererupted by 0.13 mm. Labeled tissue sections revealed significant amounts of new bone and cementum apposition at the root apex of the unopposed side following supereruption for 12 days. Newly apposited cementum and alveolar bone layers were approximately 3-fold thicker in the experimental vs the control group, whereas periodontal ligament width was maintained. Tartrate-resistant acid phosphatase staining indicated bone resorption at the mesial alveolar walls of unopposed molars and provided in tandem with new bone formation at the distal alveolar walls an explanation for the distal drift of molars in this model. Microarray analysis and semiquantitative RT-PCR demonstrated a significant increase in collagen I, integrin β5, and SPARC gene expression as revealed by comparison between the unopposed molar group and the control group. Immunohistochemical verification revealed increased levels of integrin β5 and SPARC labeling in the periodontal ligament of the unopposed molar. Together our findings suggest that posteruptive axial movement of teeth was accomplished by significant formation of new root cementum and alveolar bone at the root apex in tandem with upregulation of collagen I, integrin β5, and SPARC gene expression. PMID:17015623

42 CFR 423.336 - Risk-sharing arrangements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... payments to a Part D sponsor subject to risk—(1) Adjusted allowable risk corridor costs. For purposes of... equal to— (1) The target amount for the plan; minus (2) An amount equal to the first threshold risk.... (B) Second threshold lower limit. The second threshold lower limit of the corridor is equal to— (1...

42 CFR 423.336 - Risk-sharing arrangements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... payments to a Part D sponsor subject to risk—(1) Adjusted allowable risk corridor costs. For purposes of... equal to— (1) The target amount for the plan; minus (2) An amount equal to the first threshold risk.... (B) Second threshold lower limit. The second threshold lower limit of the corridor is equal to— (1...

42 CFR 423.780 - Premium subsidy.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (b) Premium subsidy amount. (1) The premium subsidy amount is equal to the lesser of— (i) Under the... premium attributable to basic prescription drug coverage (for enrollees in MA-PD plans); or (ii) The... for each PDP and MA-PD plan equal to a percentage, the numerator being equal to the number of Part D...

42 CFR 423.336 - Risk-sharing arrangements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... payments to a Part D sponsor subject to risk—(1) Adjusted allowable risk corridor costs. For purposes of... equal to— (1) The target amount for the plan; minus (2) An amount equal to the first threshold risk.... (B) Second threshold lower limit. The second threshold lower limit of the corridor is equal to— (1...

42 CFR 423.336 - Risk-sharing arrangements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... range as follows: (A) First threshold lower limit. The first threshold lower limit of the corridor is equal to— (1) The target amount for the plan; minus (2) An amount equal to the first threshold risk.... (B) Second threshold lower limit. The second threshold lower limit of the corridor is equal to— (1...

Articaine and mepivacaine buccal infiltration in securing mandibular first molar pulp anesthesia following mepivacaine inferior alveolar nerve block: A randomized, double-blind crossover study

PubMed Central

Gazal, Giath; Alharbi, Abdullah Muteb; Al-Samadani, Khalid HidayatAllah; Kanaa, Mohammad Dib

2015-01-01

Aims: A crossover double-blind, randomized study was designed to explore the efficacy of 2% mepivacaine with 1:100,000 adrenaline buccal infiltration and 4% articaine with 1:100,000 adrenaline buccal infiltration following 2% mepivacaine with 1:100,000 adrenaline inferior alveolar nerve block (IANB) for testing pulp anesthesia of mandibular first molar teeth in adult volunteers. Materials and Methods: A total of 23 healthy adult volunteers received two regimens with at least 1-week apart; one with 4% articaine buccal infiltration and 2% mepivacaine IANB (articaine regimen) and another with 2% mepivacaine buccal infiltration supplemented to 2% mepivacaine IANB (mepivacaine regimen). Pulp testing of first molar tooth was electronically measured twice at baseline, then at intervals of 2 min for the first 10 min, then every 5 min until 45 min postinjection. Anesthetic success was considered when two consecutive maximal stimulation on pulp testing readings without sensation were obtained within 10 min and continuously sustained for 45 min postinjection. Results: In total, the number of no sensations to maximum pulp testing for first molar teeth were significantly higher after articaine regimen than mepivacaine during 45 min postinjection (267 vs. 250 episodes, respectively, P < 0.001), however, both articaine and mepivacaine buccal infiltrations are equally effective in securing anesthetic success for first molar pulp anesthesia when supplemented to mepivacaine IANB injections (P > 0.05). Interestingly, volunteers in the articaine regimen provided faster onset and longer duration (means 2.78 min, 42.22 min, respectively) than mepivacaine regimen (means 4.26 min, 40.74 min, respectively) for first molar pulp anesthesia (P < 0.001). Conclusions: Supplementary mepivacaine and articaine buccal infiltrations produced similar successful first molar pulp anesthesia following mepivacaine IANB injections in volunteers. Articaine buccal infiltration produced faster onset and longer duration than mepivacaine buccal infiltration following mepivacaine IANB injections. PMID:26543456

Articaine and mepivacaine buccal infiltration in securing mandibular first molar pulp anesthesia following mepivacaine inferior alveolar nerve block: A randomized, double-blind crossover study.

PubMed

Gazal, Giath; Alharbi, Abdullah Muteb; Al-Samadani, Khalid HidayatAllah; Kanaa, Mohammad Dib

2015-01-01

A crossover double-blind, randomized study was designed to explore the efficacy of 2% mepivacaine with 1:100,000 adrenaline buccal infiltration and 4% articaine with 1:100,000 adrenaline buccal infiltration following 2% mepivacaine with 1:100,000 adrenaline inferior alveolar nerve block (IANB) for testing pulp anesthesia of mandibular first molar teeth in adult volunteers. A total of 23 healthy adult volunteers received two regimens with at least 1-week apart; one with 4% articaine buccal infiltration and 2% mepivacaine IANB (articaine regimen) and another with 2% mepivacaine buccal infiltration supplemented to 2% mepivacaine IANB (mepivacaine regimen). Pulp testing of first molar tooth was electronically measured twice at baseline, then at intervals of 2 min for the first 10 min, then every 5 min until 45 min postinjection. Anesthetic success was considered when two consecutive maximal stimulation on pulp testing readings without sensation were obtained within 10 min and continuously sustained for 45 min postinjection. In total, the number of no sensations to maximum pulp testing for first molar teeth were significantly higher after articaine regimen than mepivacaine during 45 min postinjection (267 vs. 250 episodes, respectively, P < 0.001), however, both articaine and mepivacaine buccal infiltrations are equally effective in securing anesthetic success for first molar pulp anesthesia when supplemented to mepivacaine IANB injections (P > 0.05). Interestingly, volunteers in the articaine regimen provided faster onset and longer duration (means 2.78 min, 42.22 min, respectively) than mepivacaine regimen (means 4.26 min, 40.74 min, respectively) for first molar pulp anesthesia (P < 0.001). Supplementary mepivacaine and articaine buccal infiltrations produced similar successful first molar pulp anesthesia following mepivacaine IANB injections in volunteers. Articaine buccal infiltration produced faster onset and longer duration than mepivacaine buccal infiltration following mepivacaine IANB injections.

Effects of Y/Gd Ratio and Boron Excess on Vacuum Ultraviolet Characteristics and Morphology of (Y,Gd)BO3:Eu Phosphor Particles Prepared by Spray Pyrolysis

NASA Astrophysics Data System (ADS)

Koo, Hye Young; Jung, Dae Soo; Hong, Seung Kwon; Kang, Yun Chan; Jung, Kyeong Youl

2007-06-01

(Y1-xGdx)BO3:Eu (0≤ x≤ 1) phosphor particles were prepared by spray pyrolysis. The optimal amount of boric acid for the high photoluminescence intensity of there particles differed depending on the molar ratio of Y to Gd. With decreasing Y/Gd molar ratio, an increasing amount of excess boric acid was required. The difference in excess quantity of boric acid, which was demanded for the highest photoluminescence intensity according to the Y/Gd ratio, influenced the morphology and mean size of the (Y,Gd)BO3:Eu phosphor particles. The (Y1-xGdx)BO3:Eu (0≤ x≤ 1) phosphor particles had a regular morphology. The mean sizes of the GdBO3:Eu and YBO3:Eu phosphor particles were 1.4 and 1 μm, respectively. The high reactivity of boron and yttrium components produced YBO3:Eu phosphor particles with high photoluminescence intensities by spray pyrolysis using a spray solution with a stoichiometric amount of boric acid.

Treatability of nonylphenol ethoxylate surfactants in on-site wastewater disposal systems.

PubMed

Huntsman, Brent E; Staples, Charles A; Naylor, Carter G; Williams, Jim-Bob

2006-11-01

The fate of nine-mole nonylphenol ethoxylate (NPE9) discharged to an on-site wastewater disposal (septic) system was the focus of a 2-year investigation. Known amounts of NPE9-based detergent were metered daily into the plumbing at a single-family household. The ethoxylate-containing wastewater was discharged to the highly anoxic environment of a 4500-L septic tank before distribution to the oxic subsurface via 100 m of leach line. After 180 days of injecting detergent to the septic system, periodic soil pore water and/or groundwater samples were collected and analyzed for nonylphenol ethoxylates (NPEs), nonylphenol ether carboxylates, and nonylphenol. The NPE9 and degradation intermediates that were measured were reduced by 99.99% on a molar basis. An 18% reduction in molar concentration within the septic tank was observed. This was followed by a further 96.7% reduction of molar concentration within the leach lines. As the pore water migrated through the vadose zone, an additional 99.69% reduction in molar concentration was measured between the bottom of the leach lines (leach line effluent) and the lowest vadose zone monitoring location. The results obtained from these analyses indicate that degradation of the surfactant occurs within the anoxic portion of the disposal system with continued rapid biodegradation in the oxic unsaturated zone. Only trace amounts of degradation residuals were detected in soil pore water. The concentration and distribution of various degradation intermediates with respect to location, time, and ambient physical conditions were evaluated. Rapid and systematic degradation of NPE in on-site wastewater disposal systems was documented.

Growth of antimony doped P-type zinc oxide nanowires for optoelectronics

DOEpatents

Wang, Zhong Lin; Pradel, Ken

2016-09-27

In a method of growing p-type nanowires, a nanowire growth solution of zinc nitrate (Zn(NO.sub.3).sub.2), hexamethylenetetramine (HMTA) and polyethylenemine (800 M.sub.w PEI) is prepared. A dopant solution to the growth solution, the dopant solution including an equal molar ration of sodium hydroxide (NaOH), glycolic acid (C.sub.2H.sub.4O.sub.3) and antimony acetate (Sb(CH.sub.3COO).sub.3) in water is prepared. The dopant solution and the growth solution combine to generate a resulting solution that includes antimony to zinc in a ratio of between 0.2% molar to 2.0% molar, the resulting solution having a top surface. An ammonia solution is added to the resulting solution. A ZnO seed layer is applied to a substrate and the substrate is placed into the top surface of the resulting solution with the ZnO seed layer facing downwardly for a predetermined time until Sb-doped ZnO nanowires having a length of at least 5 .mu.m have grown from the ZnO seed layer.

B, N co-doped carbon from cross-linking induced self-organization of boronate polymer for supercapacitor and oxygen reduction reaction

NASA Astrophysics Data System (ADS)

Chang, Ying; Yuan, Conghui; Liu, Cheng; Mao, Jie; Li, Yuntong; Wu, Haiyang; Wu, Yuzhe; Xu, Yiting; Zeng, Birong; Dai, Lizong

2017-10-01

A novel strategy has been developed to generate B, N co-doped carbon materials (CNBs) through the pyrolysis of boronate polymer nanoparticles (BPNs) derived from the condensation reaction between catechol and boronic monomers. The morphology, surface area and heteroatom (viz. B and N) content of the CNBs can be easily adjusted by altering the molar ratio between catechol and boronic monomers. The supercapacitor and oxygen reduction reaction (ORR) performance of the CNBs are optimized. CNBs derived from equal molar ratio of catechol and boronic monomers exhibit favorable performance for supercapacitor, featuring a specific capacitance of up to 299.4 F/g at 0.2 A/g, an improved rate capability and excellent cycle stability. Notably, CNBs prepared using 1/2 molar ratio of catechol to boronic monomers show excellent ORR performance, as they demonstrate good electrocatalytic activity, high tolerance for methanol and long durability. Our findings may be of interest in the design of carbon materials with optimized electrochemical properties through the control over surface area and the content of heteroatom.

47 CFR 27.1237 - Pro rata allocation of transition costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Proponent-driven transitions. BRS licensees and lessees, entities that lease EBS spectrum for a commercial... equals the pro rata share; (2) L equals the amount of spectrum used by a BRS licensee or lessee or... agreement with an EBS or BRS licensee; (3) T equals the total amount of spectrum licensed or leased for...

47 CFR 27.1237 - Pro rata allocation of transition costs.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Proponent-driven transitions. BRS licensees and lessees, entities that lease EBS spectrum for a commercial... equals the pro rata share; (2) L equals the amount of spectrum used by a BRS licensee or lessee or... agreement with an EBS or BRS licensee; (3) T equals the total amount of spectrum licensed or leased for...

47 CFR 27.1237 - Pro rata allocation of transition costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Proponent-driven transitions. BRS licensees and lessees, entities that lease EBS spectrum for a commercial... equals the pro rata share; (2) L equals the amount of spectrum used by a BRS licensee or lessee or... agreement with an EBS or BRS licensee; (3) T equals the total amount of spectrum licensed or leased for...

Effects of zygoma-gear appliance for unilateral maxillary molar distalization: A prospective clinical study.

PubMed

Kilkis, Dogan; Celikoglu, Mevlut; Nur, Metin; Bayram, Mehmet; Candirli, Celal

2016-12-01

The aim of the study was to evaluate the dentoskeletal effects of the zygoma-gear appliance used for unilateral maxillary molar distalization in patients with Class II subdivision malocclusion. This prospective clinical study consisted of 21 patients (9 boys, 12 girls; mean age, 15.68 ± 2.18 years) with unilateral Class II malocclusion treated using the unilateral zygoma-gear appliance supported by a zygomatic miniplate inserted on the Class II malocclusion side. The dentoskeletal effects of the system were evaluated using cephalometric lateral and panoramic films with a paired t test. The mean amount of distalization for the maxillary first molar was found to be 5.31 ± 2.46 mm (P <0.001) in 0.45 ± 0.12 years, showing an amount of 0.98 mm of distalization per month. It was also accompanied by a slight intrusion (0.76 ± 2.85 mm; P >0.05) and distal tipping (6.39° ± 5.39°; P <0.001) of the maxillary molars. The maxillary premolar also spontaneously moved distally 1.63 ± 1.90 mm (P <0.01) with distal tipping (4.05° ± 3.47°; P <0.001). Moreover, the inclination of the maxillary incisors and overjet were decreased (-1.59° ± 1.45°, P <0.001; and -0.29 ± 0.63 mm, P <0.05; respectively) showing no anchorage loss. No statistically significant changes were found for the skeletal and soft tissue measurements (P >0.05). The zygoma-gear appliance system is an effective method for unilateral maxillary molar distalization. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Apical extrusion of debris in primary molar root canals using mechanical and manual systems.

PubMed

Buldur, B; Hascizmeci, C; Aksoy, S; Nur Aydin, M; Guvendi, O N

2018-03-01

Apical extrusion of debris in primary root canal treatment has not been well elucidated. The purpose of this study is to compare the amount of apically extruded debris during the preparation of primary molar root canals using ProTaper, ProTaper Next, Self-adjusting File (SAF) and hand files. One hundred sixty extracted primary mandibular molar teeth were assigned to 2 groups: Group 1: Resorbed (n=80) and Group 2: Non-resorbed (n=80) and randomly to four subgroups (n=20 teeth for each subgroup) according to the instruments used, ProTaper, ProTaper Next, SAF, and hand file. The apically extruded debris was collected and dried in preweighed Eppendof tubes. The dry weight was calculated by subtracting the preoperative weight from the postoperative weight. Data were analysed statistically using the ANOVA and the Bonferroni post hoc t-test. The amount of apically extruded debris was significantly less for the non-resorbed group compared to the resorbed group (P<0.05). Regardless of the resorption groups, ProTaper Next and SAF extruded significantly less debris than did the ProTaper and hand files (P<0.05), while no statistically significant difference was found between ProTaper Next and SAF (P>0.05). All instruments caused apically extruded debris in primary teeth.

Ultrasound assisted cocrystallization from solution (USSC) containing a non-congruently soluble cocrystal component pair: Caffeine/maleic acid.

PubMed

Aher, Suyog; Dhumal, Ravindra; Mahadik, Kakasaheb; Paradkar, Anant; York, Peter

2010-12-23

Ultrasound assisted solution cocrystallization (USSC) has been studied using a non-congruently soluble pair of caffeine and maleic acid in methanol. USSC was compared with solvent cooling and slurry sonication using different molar ratios of caffeine:maleic acid (1:0.5, 1:1, 1:2, 1:3 and 1:3.5) in solution/slurry. Products were characterized by PXRD and Raman spectroscopy techniques. In USSC trials, the content of cocrystal in the product was observed to increase with increase in amount of maleic acid in solution. Only USSC offered pure caffeine/maleic acid 2:1 cocrystal product when caffeine:maleic acid; 1:3.5 molar ratio was taken in solution. Caffeine/maleic acid 1:1 cocrystal and maleic acid were not obtained in neither of the techniques. Products of solvent cooling and slurry sonication experiments were mixtures of caffeine and caffeine/maleic acid 2:1 cocrystal in varying amounts. In USSC, ultrasound application must have attained simultaneous supersaturation of cocrystal components in solution due to altered supersaturation conditions resulting in cocrystal formation. For this simultaneous attainment of supersaturation, molar ratio of cocrystal components in solution was identified as an important parameter while designing experiments for a non-congruently soluble pair having large solubility difference. Copyright © 2010 Elsevier B.V. All rights reserved.

40 CFR 258.74 - Allowable mechanisms.

Code of Federal Regulations, 2011 CFR

2011-07-01

... post-closure care, up to an amount equal to the face amount of the policy. (3) The insurance policy must be issued for a face amount at least equal to the current cost estimate for closure or post-closure care, whichever is applicable, except as provided in paragraph (k) of this section. The term face...

40 CFR 258.74 - Allowable mechanisms.

Code of Federal Regulations, 2010 CFR

2010-07-01

... post-closure care, up to an amount equal to the face amount of the policy. (3) The insurance policy must be issued for a face amount at least equal to the current cost estimate for closure or post-closure care, whichever is applicable, except as provided in paragraph (k) of this section. The term face...

5 CFR 870.401 - Withholdings and contributions for Basic insurance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... employing agency must contribute an amount equal to one-half the amount withheld from the employee's pay... individual's pay, annuity, or compensation, the agency must submit an amount equal to the sum of the... between the insured individual and the Government. The employee pays two-thirds of the cost, and the...

Immunohistochemistry Study of P53 and C-erbB-2 Expression in Trophoblastic Tissue and Their Predictive Values in Diagnosing Malignant Progression of Simple Molar Pregnancy

PubMed Central

Hasanzadeh, Malihe; Sharifi, Norrie; Farazestanian, Marjaneh; Nazemian, Seyed Saman; Madani Sani, Faezeh

2016-01-01

Background Finding a tumor marker to predict the aggressive behavior of molar pregnancy in early stages has yet been a topic for studies. Objectives In this survey we planned to study patients with molar pregnancy to 1) assess the p53 and c-erbB-2 expression in trophoblastic tissue, 2) to study the relationship between their expression intensity and progression of a molar pregnancy to gestational trophoblastic neoplasia, and 3) to determine a cut off value for the amount of p53 and c-erbB-2 expression which might correlate with aggressive behavior of molar pregnancy. Patients and Methods In a prospective cross sectional study by using a high accuracy technique EnVision Tm system for immunohistochemistry staining of molar pregnancy samples, we evaluated p53 and c-erbB-2 expression in cytotrophoblast and syncytiotrophoblast and the correlation of their expression with progression of molar pregnancy to gestational trophoblastic neoplasia (GTN). Normal prostatic tissue and Breast cancer tissue were used as positive controls. Results We studied 28 patients with simple molar pregnancy (SMP) and 30 with GTN. Cytotrophobalst had significantly higher expression of p53 and c-erbB-2 and syncytiotrophoblast had greater expression of p53 in GTN group as compared to SMP group. The cut off values for percentage of p53 positive immunostained cytotrophoblast and syncytiotrophoblast were 5.5% and 2.5%. In c-erbB-2 positive membranous stained cytotrophoblast the cut off was 12.5%. Conclusions Our data suggests that over expression of p53 and c-erbB-2 is associated with malignant progression of molar pregnancy. We encountered that high expression of p53 and c-erbB-2 in trophoblastic cells could predict gestational trophoblastic neoplasia during the early stages. PMID:27703642

Excess protons in water-acetone mixtures. II. A conductivity study.

PubMed

Semino, Rocío; Longinotti, M Paula

2013-10-28

In the present work we complement a previous simulation study [R. Semino and D. Laria, J. Chem. Phys. 136, 194503 (2012)] on the disruption of the proton transfer mechanism in water by the addition of an aprotic solvent, such as acetone. We provide experimental measurements of the mobility of protons in aqueous-acetone mixtures in a wide composition range, for water molar fractions, xw, between 0.05 and 1.00. Furthermore, new molecular dynamics simulation results are presented for rich acetone mixtures, which provide further insight into the proton transport mechanism in water-non-protic solvent mixtures. The proton mobility was analyzed between xw 0.05 and 1.00 and compared to molecular dynamics simulation data. Results show two qualitative changes in the proton transport composition dependence at xw ∼ 0.25 and 0.8. At xw < 0.25 the ratio of the infinite dilution molar conductivities of HCl and LiCl, Λ(0)(HCl).Λ(0)(LiCl)(-1), is approximately constant and equal to one, since the proton diffusion is vehicular and equal to that of Li(+). At xw ∼ 0.25, proton mobility starts to differ from that of Li(+) indicating that above this concentration the Grotthuss transport mechanism starts to be possible. Molecular dynamics simulation results showed that at this threshold concentration the probability of interconversion between two Eigen structures starts to be non-negligible. At xw ∼ 0.8, the infinite molar conductivity of HCl concentration dependence qualitatively changes. This result is in excellent agreement with the analysis presented in the previous simulation work and it has been ascribed to the interchange of water and acetone molecules in the second solvation shell of the hydronium ion.

Five-minute Apgar score ≤ 5 and Molar Incisor Hypomineralisation (MIH) - a case control study.

PubMed

Sidaly, Rivan; Schmalfuss, Andreas; Skaare, Anne B; Sehic, Amer; Stiris, Tom; Espelid, Ivar

2016-07-22

The aetiology of molar incisor hypomineralisation (MIH) is unclear. The asymmetric distribution of MIH in the dentition may indicate that an insult of short duration that affects ameloblasts at a vulnerable stage could be a causative factor. Apgar ≤ 5 at 5 min may indicate asphyxia (hypoxic-ischemic insult) during birth. It was hypnotised that low Apgar score during birth may cause MIH. The present study aimed to examine a possible association between Apgar ≤ 5 at 5 min and the occurrence of MIH. Two study groups were selected for examination. The cases comprised 67 children aged 8-10 years born with Apgar score equal to or below 5 after 5 min. The control group comprised 157 age-matched healthy children. First permanent molars, second primary molars and all permanent incisors were examined in all children. Clinical examination was undertaken by two calibrated examiners and intraoral close-up photographs of the teeth were later evaluated by three calibrated and blinded clinicians. Demarcated opacities, post-eruptive breakdown, atypical restorations and extractions due to MIH, according to the criteria of the European Association of Paediatric Dentistry, were assessed. The prevalence of MIH did not differ between the two groups. A chi-square test failed to confirm any statistically significant relationship between 5-min Apgar scores and MIH occurrence. In addition, there was no statistically significant relationship between the number of affected first permanent molars in cases and controls. There was no association between Apgar ≤ 5 at 5 min and the occurrence of MIH.

Differential molar heat capacities to test ideal solubility estimations.

PubMed

Neau, S H; Bhandarkar, S V; Hellmuth, E W

1997-05-01

Calculation of the ideal solubility of a crystalline solute in a liquid solvent requires knowledge of the difference in the molar heat capacity at constant pressure of the solid and the supercooled liquid forms of the solute, delta Cp. Since this parameter is not usually known, two assumptions have been used to simplify the expression. The first is that delta Cp can be considered equal to zero; the alternate assumption is that the molar entropy of fusion, delta Sf, is an estimate of delta Cp. Reports claiming the superiority of one assumption over the other, on the basis of calculations done using experimentally determined parameters, have appeared in the literature. The validity of the assumptions in predicting the ideal solubility of five structurally unrelated compounds of pharmaceutical interest, with melting points in the range 420 to 470 K, was evaluated in this study. Solid and liquid heat capacities of each compound near its melting point were determined using differential scanning calorimetry. Linear equations describing the heat capacities were extrapolated to the melting point to generate the differential molar heat capacity. Linear data were obtained for both crystal and liquid heat capacities of sample and test compounds. For each sample, ideal solubility at 298 K was calculated and compared to the two estimates generated using literature equations based on the differential molar heat capacity assumptions. For the compounds studied, delta Cp was not negligible and was closer to delta Sf than to zero. However, neither of the two assumptions was valid for accurately estimating the ideal solubility as given by the full equation.

34 CFR 366.31 - What happens if the amount of earmarked funds does not equal or exceed the amount of Federal...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true What happens if the amount of earmarked funds does not equal or exceed the amount of Federal funds for a preceding fiscal year? 366.31 Section 366.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF...

34 CFR 366.31 - What happens if the amount of earmarked funds does not equal or exceed the amount of Federal...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What happens if the amount of earmarked funds does not equal or exceed the amount of Federal funds for a preceding fiscal year? 366.31 Section 366.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF...

34 CFR 366.31 - What happens if the amount of earmarked funds does not equal or exceed the amount of Federal...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false What happens if the amount of earmarked funds does not equal or exceed the amount of Federal funds for a preceding fiscal year? 366.31 Section 366.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF...

34 CFR 366.31 - What happens if the amount of earmarked funds does not equal or exceed the amount of Federal...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true What happens if the amount of earmarked funds does not equal or exceed the amount of Federal funds for a preceding fiscal year? 366.31 Section 366.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF...

34 CFR 366.31 - What happens if the amount of earmarked funds does not equal or exceed the amount of Federal...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false What happens if the amount of earmarked funds does not equal or exceed the amount of Federal funds for a preceding fiscal year? 366.31 Section 366.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF...

Rapid Light-Triggered Drug Release in Liposomes Containing Small Amounts of Unsaturated and Porphyrin-Phospholipids.

PubMed

Luo, Dandan; Li, Nasi; Carter, Kevin A; Lin, Cuiyan; Geng, Jumin; Shao, Shuai; Huang, Wei-Chiao; Qin, Yueling; Atilla-Gokcumen, G Ekin; Lovell, Jonathan F

2016-06-01

Prompt membrane permeabilization is a requisite for liposomes designed for local stimuli-induced intravascular release of therapeutic payloads. Incorporation of a small amount (i.e., 5 molar percent) of an unsaturated phospholipid, such as dioleoylphosphatidylcholine (DOPC), accelerates near infrared (NIR) light-triggered doxorubicin release in porphyrin-phospholipid (PoP) liposomes by an order of magnitude. In physiological conditions in vitro, the loaded drug can be released in a minute under NIR irradiation, while liposomes maintain serum stability otherwise. This enables rapid laser-induced drug release using remarkably low amounts of PoP (i.e., 0.3 molar percent). Light-triggered drug release occurs concomitantly with DOPC and cholesterol oxidation, as detected by mass spectrometry. In the presence of an oxygen scavenger or an antioxidant, light-triggered drug release is inhibited, suggesting that the mechanism is related to singlet oxygen mediated oxidization of unsaturated lipids. Despite the irreversible modification of lipid composition, DOPC-containing PoP liposome permeabilization is transient. Human pancreatic xenograft growth in mice is significantly delayed with a single chemophototherapy treatment following intravenous administration of 6 mg kg(-1) doxorubicin, loaded in liposomes containing small amounts of DOPC and PoP. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

24 CFR 266.634 - Reinstatement of the contract of insurance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... insurance. (c) Payment. Within 30 days of the date of the notice under paragraph (b) of this section, the HFA shall pay HUD an amount equal to the initial claim amount, as determined under § 266.628(a)(1), plus an amount equal to the accrued and unpaid interest on the HFA Debenture through the reinstatement...

34 CFR 648.51 - What is the amount of a stipend?

Code of Federal Regulations, 2013 CFR

2013-07-01

... the fellow a stipend at a level of support equal to that provided by the National Science Foundation... Distribute Funds? § 648.51 What is the amount of a stipend? (a) For a fellowship initially awarded for an... amount that equals the fellow's financial need or $10,000, whichever is less. (b) For a fellowship...

34 CFR 648.51 - What is the amount of a stipend?

Code of Federal Regulations, 2011 CFR

2011-07-01

... the fellow a stipend at a level of support equal to that provided by the National Science Foundation... Distribute Funds? § 648.51 What is the amount of a stipend? (a) For a fellowship initially awarded for an... amount that equals the fellow's financial need or $10,000, whichever is less. (b) For a fellowship...

34 CFR 648.51 - What is the amount of a stipend?

Code of Federal Regulations, 2014 CFR

2014-07-01

... the fellow a stipend at a level of support equal to that provided by the National Science Foundation... Distribute Funds? § 648.51 What is the amount of a stipend? (a) For a fellowship initially awarded for an... amount that equals the fellow's financial need or $10,000, whichever is less. (b) For a fellowship...

34 CFR 648.51 - What is the amount of a stipend?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the fellow a stipend at a level of support equal to that provided by the National Science Foundation... Distribute Funds? § 648.51 What is the amount of a stipend? (a) For a fellowship initially awarded for an... amount that equals the fellow's financial need or $10,000, whichever is less. (b) For a fellowship...

34 CFR 648.51 - What is the amount of a stipend?

Code of Federal Regulations, 2012 CFR

2012-07-01

... the fellow a stipend at a level of support equal to that provided by the National Science Foundation... Distribute Funds? § 648.51 What is the amount of a stipend? (a) For a fellowship initially awarded for an... amount that equals the fellow's financial need or $10,000, whichever is less. (b) For a fellowship...

29 CFR 1620.6 - Coverage is not based on amount of covered activity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Coverage is not based on amount of covered activity. 1620.6 Section 1620.6 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.6 Coverage is not based on amount of covered activity. The FLSA makes no...

12 CFR 702.107 - Alternative components for standard calculation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to 12 years; (ii) Twelve percent (12%) of the amount of such loans with a remaining maturity of greater than 12 years, but less than or equal to 20 years; and (iii) Fourteen percent (14%) of the amount... than or equal to 12 years; (ii) Ten percent (10%) of the amount of such loans with a documented call...

Comparative Analysis of Protaper and Waveone Systems to Reduce Enterococcus Faecalis from Root Canal System in Primary Molars--An in Vitro Study.

PubMed

Pinheiro, Sérgio Luiz; Pessoa, Carolina; da Silva, Josianne Neres; Gonçalves, Rafael Orro; Duarte, Danilo Antonio; da Silveira Bueno, Carlos Eduardo

2016-01-01

To assess, in vitro, the ability of the ProTaper(™) and WaveOne(™) systems to reduce Enterococcus faecalis contamination in primary molars. Sixty roots of primary molars were contaminated with E. faecalis. Roots were randomly allocated to one of four groups (n=20): ProTaper(™), WaveOne(™), control A, or control B. The files used were S1 and S2/F1 and F2 (ProTaper(™) system) and 25.08 (WaveOne(™) system). In control group A, the root canal was left uninstrumented, whereas in control group B, the root canal was irrigated with NaCl 0.9%. E. faecalis was sampled from the root canal system before and after instrumentation and the Wilcoxon test and Mann-Whitney U were used. There were no differences in E. faecalis counts between pre-instrumentation counts in the ProTaper™ and WaveOne(™) (p>0.05). The ProTaper(™) system led to an 89.36% reduction in E. faecalis burden, versus 78.10% with the WaveOne(™) system (p>0.05). Instrumentation time was shorter with WaveOne(™) (p<0.0001). The ProTaper(™) and WaveOne™ systems were equally effective in reducing Enterococcus faecalis in primary molars. The WaveOne(™) system was associated with shorter instrumentation time.

Laser vs bur for bone cutting in impacted mandibular third molar surgery: A randomized controlled trial.

PubMed

Passi, Deepak; Pal, Uma Shankar; Mohammad, Shadab; Singh, Rakesh Kumar; Mehrotra, Divya; Singh, Geeta; Kumar, Manoj; Chellappa, Arul A L; Gupta, Chandan

2013-01-01

The aim of this study was to assess the feasibility of Er: YAG laser in bone cutting for removal of impacted lower third molar teeth and compare its outcomes with that of surgical bur. The study comprised 40 subjects requiring removal of impacted mandibular third molar, randomly categorized into two equal groups of 20 each, who had their impacted third molar removed either using Er: YAG laser or surgical bur as per their group, using standard methodology of extraction of impacted teeth. Clinical parameters like pain, bleeding, time taken for bone cutting, postoperative swelling, trismus, wound healing and complications were compared for both groups. Clinical parameters like pain, bleeding and swelling were lower in laser group than bur group, although the difference was statistically not significant. However, postoperative swelling showed significant difference in the two groups. Laser group required almost double the time taken for bone cutting with bur. Trismus persisted for a longer period in laser group. Wound healing and complications were assessed clinically and there was no significant difference in both the groups. Based on the results of our study, the possibility of bone cutting using lasers is pursued, the osteotomy is easily performed and the technique is better suited to minimally invasive surgical procedures. The use of Er: YAG laser may be considered as an alternative tool to surgical bur, specially in anxious patients.

Dilatometric measurement of the partial molar volume of water sorbed to durum wheat flour.

PubMed

Hasegawa, Ayako; Ogawa, Takenobu; Adachi, Shuji

2013-01-01

Moisture sorption isotherms were measured at 25 °C for untreated, dry-heated and pre-gelatinized durum wheat flour samples. The isotherms could be expressed by the Guggenheim-Anderson-de Boer equation. The amount of water sorbed to the untreated flour was highest for low water activity, with water sorbed to the pre-gelatinized and dry-heated flour samples following. The dry-heated and pregelatinized flour samples exhibited the same dependence of the moisture content on the partial molar volume of water at 25 °C as the untreated flour. The partial molar volume of water was ca. 9 cm(3)/mol at a moisture content of 0.03 kg-H2O/kg-d.m. The volume increased with increasing moisture content, and reached a constant value of ca. 17.5 cm(3)/mol at a moisture content of 0.2 kg-H2O/kg-d.m. or higher.

Preparation of Si3N4 Form Diatomite via a Carbothermal Reduction-Nitridation Process

NASA Astrophysics Data System (ADS)

Ma, Bin; Huang, Zhaohui; Mei, Lefu; Fang, Minghao; Liu, Yangai; Wu, Xiaowen; Hu, Xiaozhi

2016-05-01

Si3N4 was produced using diatomite and sucrose as silicon and carbon sources, respectively. The effect of the C/SiO2 molar ratio, heating temperature and soaking time on the morphology and phase compositions of the final products was investigated by scanning electron microscopy, x-ray diffraction analysis and energy dispersive spectroscopy. The phase equilibrium relationships of the system at different heating temperatures were also investigated based on the thermodynamic analysis. The results indicate that the phase compositions depended on the C/SiO2 molar ratio, heating temperature and soaking time. Fabrication of Si3N4 from the precursor via carbothermal reduction nitridation was achieved at 1550°C for 1-8 h using a C/SiO2 molar ratio of 3.0. The as-prepared Si3N4 contained a low amount of Fe3Si (<1 wt.%).

Na/Cl molar ratio changes during a salting cycle and its application to the estimation of sodium retention in salted watersheds.

PubMed

Sun, Hongbing; Huffine, Maria; Husch, Jonathan; Sinpatanasakul, Leeann

2012-08-01

Using soil column experiments and data from natural watersheds, this paper analyzes the changes in Na/Cl molar ratios during a salting cycle of aqueous-soil systems. The soil column experiments involved introducing NaCl salt at various initial concentrations into multiple soil columns. At the start of a salting cycle in the column experiments, sodium was adsorbed more than chloride due to cation exchange processes. As a result, the initial Na/Cl molar ratio in column effluent was lower than 1, but increased thereafter. One-dimensional PHREEQC geochemical transport simulations also were conducted to further quantify these trends under more diverse scenarios. The experimentally determined Na/Cl molar ratio pattern was compared to observations in the annual salting cycle of four natural watersheds where NaCl is the dominant applied road deicing salt. Typically, Na/Cl molar ratios were low from mid-winter to early spring and increased after the bulk of the salt was flushed out of the watersheds during the summer, fall and early winter. The established relationship between the Na/Cl molar ratios and the amount of sodium retention derived from the column experiments and computer simulations present an alternative approach to the traditional budget analysis method for estimating sodium retention when the experimental and natural watershed patterns of Na/Cl molar ratio change are similar. Findings from this study enhance the understanding of sodium retention and help improve the scientific basis for future environmental policies intended to suppress the increase of sodium concentrations in salted watersheds. Copyright © 2012 Elsevier B.V. All rights reserved.

Biophysics of Water: A Working Conference.

DTIC Science & Technology

1981-09-15

penicillinase can be explained by the effects of urea or quanidine on the properties of the water rather than the protein. A sometimes forgotten role of water...solvent it contributes to structure; and in combination with macromolecules it becomes a lubricant. All these effects depend on water-macromolecular...and quanidine in approximately equal molar concentrations tend to cancel each other’s effect leaving the protein unchanged. Secondly, it was pointed

Mechanisms Underlying the Breast Cancer Susceptibility Locus Mcs5a

DTIC Science & Technology

2010-07-01

fixed using formaldehyde . The extracted fixed chromatin is digested with a restriction enzyme and religated in a strongly dilute fashion. In this...procedure the ligation of genetic elements that were glued together by formaldehyde fixation is favored over ligation of random elements. Following... digested and randomly ligated control template containing all restriction fragments of interest in equal molarity. To investigate the Mcs5a1-Mcs5a2

Seed/Catalyst-Free Growth of Gallium-Based Compound Materials on Graphene on Insulator by Electrochemical Deposition at Room Temperature.

PubMed

Rashiddy Wong, Freddawati; Ahmed Ali, Amgad; Yasui, Kanji; Hashim, Abdul Manaf

2015-12-01

We report the growth of gallium-based compounds, i.e., gallium oxynitride (GaON) and gallium oxide (Ga2O3) on multilayer graphene (MLG) on insulator using a mixture of ammonium nitrate (NH4NO3) and gallium nitrate (Ga(NO3)3) by electrochemical deposition (ECD) method at room temperature (RT) for the first time. The controlling parameters of current density and electrolyte molarity were found to greatly influence the properties of the grown structures. The thicknesses of the deposited structures increase with the current density since it increases the chemical reaction rates. The layers grown at low molarities of both solutions basically show grain-like layer with cracking structures and dominated by both Ga2O3 and GaON. Such cracking structures seem to diminish with the increases of molarities of one of the solutions. It is speculated that the increase of current density and ions in the solutions helps to promote the growth at the area with uneven thicknesses of graphene. When the molarity of Ga(NO3)3 is increased while keeping the molarity of NH4NO3 at the lowest value of 2.5 M, the grown structures are basically dominated by the Ga2O3 structure. On the other hand, when the molarity of NH4NO3 is increased while keeping the molarity of Ga(NO3)3 at the lowest value of 0.8 M, the GaON structure seems to dominate where their cubic and hexagonal arrangements are coexisting. It was found that when the molarities of Ga(NO3)3 are at the high level of 7.5 M, the grown structures tend to be dominated by Ga2O3 even though the molarity of NH4NO3 is made equal or higher than the molarity of Ga(NO3)3. When the grown structure is dominated by the Ga2O3 structure, the deposition process became slow or unstable, resulting to the formation of thin layer. When the molarity of Ga(NO3)3 is increased to 15 M, the nanocluster-like structures were formed instead of continuous thin film structure. This study seems to successfully provide the conditions in growing either GaON-dominated or Ga2O3-dominated structure by a simple and low-cost ECD. The next possible routes to convert the grown GaON-dominated structure to either single-crystalline GaN or Ga2O3 as well as Ga2O3-dominated structure to single-crystalline Ga2O3 structure have been discussed.

Effects of different types of tooth movement and force magnitudes on the amount of tooth movement and root resorption in rats.

PubMed

Nakano, Takako; Hotokezaka, Hitoshi; Hashimoto, Megumi; Sirisoontorn, Irin; Arita, Kotaro; Kurohama, Takeshi; Darendeliler, M Ali; Yoshida, Noriaki

2014-11-01

To investigate differences in the amount of tooth movement and root resorption that occurred after tipping and bodily movement of the maxillary first molar in rats. Ten-week-old female Wistar rats were divided into two groups according to type of tooth movement and subdivided into four subgroups according to the magnitude of applied force. Nickel-titanium closed-coil springs exerting forces of 10, 25, 50, or 100 g were applied to the maxillary left first molars to induce mesial tooth movement. We designed a novel orthodontic appliance for bodily tooth movement. Tooth movement distance and root resorption were measured using microcomputed tomography and scanning electron and scanning laser microscopy. The amount of tooth movement in the bodily tooth movement group was less than half that in the tipping tooth movement group. The greatest amount of tooth movement occurred in the 10-g tipping and 50-g bodily tooth movement subgroups, and the amount of tooth movement decreased with the application of an excessive magnitude of force. Conversely, root resorption increased when the heavier orthodontic force was applied in both groups. Root resorption in the tipping tooth movement group was approximately twice that in the bodily tooth movement group. Root resorption in the tipping tooth movement group was more pronounced than that in the bodily tooth movement group. Although the amount of tooth movement decreased when extremely heavy forces were applied, root resorption increased in both the tipping and bodily tooth movement groups in rats.

Effects of a hinged expansion screw for median mandibular distraction treatment on the lower first molars regarding tooth inclination and intermolar transverse distance.

PubMed

Muchitsch, Alfred Peter; Winsauer, Heinz; Wendl, Brigitte; Pichelmayer, Margit; Kuljuh, Elma; Navysany, Marie Therese; Muchitsch, Markus

2014-01-01

The goal of this study was to assess the extent to which median mandibular distraction via a cemented and screw-retained full-coverage splint appliance employing a hinged expansion screw causes inclination changes in the lower first molars and widens the dental arch. Our study included 17 patients (12 females and 5 males; average age 16 years and 3 months) who presented with transverse space deficits and pronounced dental crowding. Baseline and final mandibular casts reflecting the situations before and after 6 weeks of median distraction therapy were created, scanned, and matched via their coordinate systems. Perpendiculars were drawn at the geometric centers between the cusp tips of teeth 36 and 46 and projected against the frontal plane. The intersection angles yielded single-tooth and total inclination values for both molars, and the difference between the intermolar distances measured at the geometric centers of both teeth provided the amount of transverse expansion. An intraclass correlation coefficient (ICC) of >0.99 was obtained in a series of three measurements. After distraction treatment, the total inclination values between teeth 36 and 46 changed by +2.93 ± 9.14°. The corresponding single-tooth inclinations changed by +0.68 ± 6.32° and -2.25 ± 4.33°, respectively. Both molars underwent similar degrees of buccal or lingual tipping. Compared to a mean expansion of +6.9 ± 1.83 mm at the distraction screw, a distance increase of only +3.77 ± 1.27 mm along the transversal connecting teeth 36 and 46 was recorded. Pearson's correlation coefficient was 0.336 between total tipping and intermolar expansion (p=0.187) and -0.426 between total tipping and patient age (p=0.088). Expansion amounts were approximately twice as long at the expansion screw as between the first molars. This V-shaped expansion pattern was due to the hinged connections between each expansion screw and the full-coverage splints. The buccal and lingual tipping of molars measured may be due to varying heights of the posterior alveolar ridge during mixed dentition or to anatomy-related differences in the expansion-screw position. In all cases we observed a mainly parallel opening of the distraction gap on the vertical plane.

[Effect of concomitant substances and addition order on the adsorption of Tween 80 on sand].

PubMed

Xu, Wei; Zhao, Yong-sheng; Li, Sui; Dai, Ning

2008-08-01

Adsorption of Tween 80 on sand was investigated, and the effect of inorganic salts (CaCl2), anionic surfactant (SDS) and lignosulphonates (sodium lignosulphonate or ammonium lignosulphonate) on the adsorption of Tween 80 on sand were evaluated at 25 degrees C. The results show that saturated adsorption amount of Tween 80 on sand enhance when CaCl2 or SDS is added into flushing solution of Tween 80. And the adsorption of Tween 80 on sand increase with the increase of molar fraction of CaCl2 or SDS in mixed flushing solution. And adsorption amount of Tween 80 on sand also enhance when SDS is added into sand firstly. The effects of mixing ratios and addition order of lignosulphonates on adsorption of Tween 80 were considered. The results show that with the increase of molar fraction of lignosulphonates in mixing flushing solution, adsorption amount of Tween 80 on sand decrease. The adsorption amount of Tween 80 reduce 20%-75% due to the exist of ammonium lignosulphonate is superior to sodium lignosulphonate (10%-60%) when mix the lignosulphonates-Tween 80 at the total mass ratios of 1:10, while the adsorption amount of Tween 80 reduce 70%-90% at the total mass ratios of 1:2. Lignosulphonates added into sand firstly is more efficient than that together. Therefore,use of lignosulphonates as a preflush can reduce the adsorption of surfactants on sand and is a better method to applied in in situ flushing.

Radiographic evaluation of anatomical variables in maxilla and mandible in relation to dental implant placement.

PubMed

Chandra, Poornima; Govindaraju, Poornima; Chowdhary, Ramesh

2016-01-01

Oral rehabilitation using implants is rapidly replacing tooth supported prostheses. The success of implants is largely dependent on the quality and quantity of alveolar bone. In this study, we assessed the location of limiting anatomical structures and the amount of alveolar bone available for implant placement. Six hundred digital panoramic radiographs (300 males and 300 females) of dentate patients aged between 15-60 years were selected from the archives. The radiographs were subdivided into 3 groups with age interval of 15 years. Then the location of mental foramen, anterior loop, mandibular canal and maxillary sinus was determined. The amount of bone available was measured in both maxilla and mandible in the premolar and molar regions. The mental foramen was most commonly located at the apex of the second premolar in both the genders. The anterior loop was more readily visible in the younger age group. The amount of bone available in the premolar and molar region of the mandible is nearly the same, while more bone is available in the premolar region of the maxilla. The location and morphology of anatomical structures of the jaws vary not only in different populations but also within the same population. The amount of bone available also showed variations in the same population and in the same individual on the right and left sides. The limiting anatomical structures govern the amount of bone available for possible implant placement.

Comparison of different grafting materials for treatment of bone defect distal to the molar in canine.

PubMed

Ge, Jing; Yang, Chi; Wang, Yong; Zheng, Jiawei; Hua, Hongfei; Zhu, Jun

2018-03-25

The extraction of impacted mandibular 3rd molar is highly related to bone defect distal to the adjacent 2nd molar. The aim of this study was to evaluate the effect of different grafting materials for the treatment of bone defect distal to the mandibular molar in canine model. In 12 beagle dogs, bilateral mandibular 2nd and 3rd molars were extracted and entire mesial bone of the 2nd molar extracted socket was surgically removed. Twenty-four bone defects (4 mm width and 8 mm depth) were randomly assigned to 4 groups, and grafted using 1 of the following protocols: (1) group C: no graft; (2) group Ta: autogenous bone (AB); (3) group Tb: deproteinized bovine bone mineral (DBBM) with a collagen membrane (CM); and (4) group Tab: an equal mixture of AB/DBBM + CM. Quantitative imageology analyses using micro-CT and fluorescence microscopy, as well as qualitative analyses using histological and histomorphometric evaluations, were characterized at postoperative 12 weeks. Significant differences of all variables were tested by multivariate analysis (P < .05). The defect depth was significantly lower in groups Ta, Tb, and Tab (1.70, 1.97, and 1.61 mm, respectively; mean) than in the group C (3.66 mm, P < .01, all). Compared to the sites received DBBM/CM, sites grafted with AB or AB/DBBM exhibited significant greater and faster new bone formation (P < .01). The percentage of DBBM remnants area (%) was significantly higher in group Tb than in group Tab (10.43% and 1.13%, P < .01; mean). Our data suggested grafting AB alone, DBBM/CM, or AB/DBBM/CM resulted in similar periodontal parameters in canine. Furthermore, the AB could accelerate new bone regeneration and mineralization, and promote the biodegradation of DBBM. © 2018 Wiley Periodicals, Inc.

Prevalence and characteristics of Molar Incisor Hypomineralisation (MIH) in the child population residing in Gandhinagar, Gujarat, India.

PubMed

Parikh, D R; Ganesh, M; Bhaskar, V

2012-02-01

Most prevalence studies on Molar Incisor Hypomineralisation (MIH) have been carried out in European countries and data from Asia especially south Asian populations are lacking. To investigate the prevalence and clinical characteristics of MIH in children residing in a western region of India. A cross-sectional survey including 1,366 children from 5 age cohorts, 8-12 years, studying in primary schools or attending the University Department, was carried out in the area of Gandhinagar, Gujarat, India. The dental examination was performed by a single well-trained and calibrated examiner in day light conditions. Full mouth inspection of wet teeth was conducted using the EAPD 2003 criteria for diagnosis of MIH. Results were recorded and statistically analysed using Chi-square test, independent sample t-test and Pearson correlations. Prevalence of MIH was 9.2% in the examined population. Males and females were equally affected. Among 12 index teeth involved in the examination, the most commonly affected were in descending order 46, 36, 16, 11 [FDI] and the least 42, 32, and 22. 17.4% of the cases revealed only molars involved, the remaining 72.6% having both molars and incisors affected; all four first permanent molars showed in 23% of the cases while no cases of only affected incisors were found. Of the MIH teeth 77.3% revealed mild defects and 22.7% severe defects. All incisors were mildly affected, as compared with only 67.1% of the molars, the remaining 32.9% being severely affected. As age increased, a statistically significant larger total number and severity level of affected teeth were recorded. Prevalence of MIH using EAPD 2003 criteria was found to be similar to other studies evaluating children in different geographic locations such as Europe, South America etc. Using the EAPD standardised criteria, more studies should be conducted in other Indian regions, in order to further evaluate prevalence, characteristics and treatment needs for this clinically demanding condition.

Treatment and resource recovery from inorganic fluoride-containing waste produced by the pesticide industry.

PubMed

Li, Yang; Zhang, Hua; Zhang, Zhiqi; Shao, Liming; He, Pinjing

2015-05-01

The rapid development of the fluorinated pesticide industry has produced a large amount of fluorine-containing hazardous waste, especially inorganic fluoride-containing waste (IFCW). A two-step process, including extraction and recovery, was developed to recover fluorine as synthetic cryolite from IFCW produced by the pesticide industry. The optimum conditions for extraction were found to be a temperature of 75°C, an initial pH (pHi) of 12, a 4-hr incubation time and a liquid-to-solid ratio of 40mL/g; these conditions resulted in a fluorine extraction ratio of 99.0%. The effects of pH and the F/Al molar ratio on fluorine recovery and the compositional, mineralogical and morphological characteristics of the cryolite products were investigated. Field-emission scanning electron microscopy of recovered precipitates showed changes in morphology with the F/Al molar ratio. Coupling Fourier transform and infrared spectroscopy, X-ray diffraction indicated that the formation of AlF6(3-) was restricted as increasing pH. Both the amount of fluorine recovered and the quality of the cryolite were optimized at initial pH=3 and a F/Al molar ratio 5.75. This study proposed a reliable and environmentally friendly method for the treatment of fluoride-containing wastes, which could be suitable for industrial applications. Copyright © 2015. Published by Elsevier B.V.

5 CFR 831.682 - Election by a retiree who retired before May 7, 1985, to provide a former spouse annuity.

Code of Federal Regulations, 2014 CFR

2014-01-01

... annuity, the retiree must deposit an amount equal to the sum of the monthly differences between the self... annual interest, computed under § 831.105, from the date to which each monthly difference is attributable... amount equal to the sum of the monthly differences between the self-only annuity and the amount of...

5 CFR 831.682 - Election by a retiree who retired before May 7, 1985, to provide a former spouse annuity.

Code of Federal Regulations, 2011 CFR

2011-01-01

... annuity, the retiree must deposit an amount equal to the sum of the monthly differences between the self... annual interest, computed under § 831.105, from the date to which each monthly difference is attributable... amount equal to the sum of the monthly differences between the self-only annuity and the amount of...

5 CFR 831.682 - Election by a retiree who retired before May 7, 1985, to provide a former spouse annuity.

Code of Federal Regulations, 2013 CFR

2013-01-01

... annuity, the retiree must deposit an amount equal to the sum of the monthly differences between the self... annual interest, computed under § 831.105, from the date to which each monthly difference is attributable... amount equal to the sum of the monthly differences between the self-only annuity and the amount of...

5 CFR 831.682 - Election by a retiree who retired before May 7, 1985, to provide a former spouse annuity.

Code of Federal Regulations, 2010 CFR

2010-01-01

... annuity, the retiree must deposit an amount equal to the sum of the monthly differences between the self... annual interest, computed under § 831.105, from the date to which each monthly difference is attributable... amount equal to the sum of the monthly differences between the self-only annuity and the amount of...

5 CFR 831.682 - Election by a retiree who retired before May 7, 1985, to provide a former spouse annuity.

Code of Federal Regulations, 2012 CFR

2012-01-01

... annuity, the retiree must deposit an amount equal to the sum of the monthly differences between the self... annual interest, computed under § 831.105, from the date to which each monthly difference is attributable... amount equal to the sum of the monthly differences between the self-only annuity and the amount of...

Intracanal molar barometric pressure differentials at simulated altitude conditions - proof of concept study.

PubMed

Roberts, H W; Kirkpatrick, T C

2016-08-01

To evaluate whether objective data could be obtained regarding internal pressure conditions of a molar tooth with canals prepared but not filled exposed to reduced barometric pressures that could be experienced by aircrew. The root canals of five mandibular molars were prepared but not filled. Root apices were sealed with a resin-modified glass-ionomer liner and root surfaces sealed with a dental adhesive. The sealed root surfaces were then coated with a polyvinylsiloxane (PVS) adhesive and the teeth inserted into cylinders of PVS impression material to the level of the cervical enamel junction. Barometric pressure transducers were placed in the pulp chambers with the endodontic access sealed with cotton and a provisional restoration. The specimens were then subjected to a manually controlled, atmospheric altitude challenge consisting of a slow ascent and descent to a simulated 25 000 feet above sea level followed by a rapid altitude climb and descent. The real-time difference between intracanal and simulated atmospheric pressures were recorded and correlated (Pearson's, P = 0.05). No tooth material fractured, and there was no failure of the provisional restorations. Barometric pressures inside the closed prepared molar canals and the ambient atmospheric pressure were found to correlate (r(2)  = 0.97-0.99; P < 0.0001), but pressure equalization lags were observed. However, no differences greater than six pounds per square inch (310 torr) were noted. This pilot study established a protocol that demonstrated that objective data regarding barometric pressures within the prepared canals of molars can be obtained at simulated altitude conditions. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Comparative Efficacy of Amoxicillin/Clavulanic Acid and Levofloxacin in the Reduction of Postsurgical Sequelae After Third Molar Surgery: A Randomized, Double-Blind, Clinical Trial in a Nigerian University Teaching Hospital.

PubMed

Ndukwe, Kizito Chioma; Braimah, Ramat Oyebunmi; Owotade, John Foluso; Aregbesola, Stephen Babatunde

2016-01-01

The most common sequelae after surgical removal of mandibular third molar are pain, trismus, swelling, and dysphagia. However, these symptoms can also signal the onset of surgical site infection and alveoli osteitis. The aim of this study was to evaluate the efficacy of prophylactic amoxicillin/clavulanic acid and levofloxacin and preemptive therapy of amoxicillin/clavulanic acid in the reduction of postinflammatory complications, surgical site infection, and alveolar osteitis following the third molar surgery. A total of 135 patients were randomized into three equal groups: Group A (preemptive therapy of amoxicillin/clavulanic acid) with preoperative dose of 875/125 mg amoxicillin/clavulanic acid followed by 500/125 mg amoxicillin/clavulanic acid 12 hourly for 5 days, Group B (amoxicillin/clavulanic acid prophylaxis) with a single preoperative dose of amoxicillin/clavulanic acid 875/125 mg tablets, and Group C (levofloxacin prophylaxis) with a single preoperative dose of levofloxacin 1000 mg tablets. All patients had ostectomy using surgical handpiece and burs and received same analgesics (tabs ibuprofen 400 mg 8 hourly for 3 days). No case of surgical site infection or alveoli osteitis was recorded in the study groups. There were no statistically significant differences between the treatment groups with regard to pain, mouth opening, postoperative facial dimension, and body temperature. Amoxicillin/clavulanic acid as a single preoperative bolus should be adequate for the prevention of postoperative wound infection and alveoli osteitis following the third molar extraction as there is no need for an extension of the antibiotic. Moreover, levofloxacin can be utilized as prophylaxis in patients undergoing mandibular third molar extraction if such patients are allergic to penicillins.

Comparative Efficacy of Amoxicillin/Clavulanic Acid and Levofloxacin in the Reduction of Postsurgical Sequelae After Third Molar Surgery: A Randomized, Double-Blind, Clinical Trial in a Nigerian University Teaching Hospital

PubMed Central

Ndukwe, Kizito Chioma; Braimah, Ramat Oyebunmi; Owotade, John Foluso; Aregbesola, Stephen Babatunde

2016-01-01

Background: The most common sequelae after surgical removal of mandibular third molar are pain, trismus, swelling, and dysphagia. However, these symptoms can also signal the onset of surgical site infection and alveoli osteitis. The aim of this study was to evaluate the efficacy of prophylactic amoxicillin/clavulanic acid and levofloxacin and preemptive therapy of amoxicillin/clavulanic acid in the reduction of postinflammatory complications, surgical site infection, and alveolar osteitis following the third molar surgery. Patients and Methods: A total of 135 patients were randomized into three equal groups: Group A (preemptive therapy of amoxicillin/clavulanic acid) with preoperative dose of 875/125 mg amoxicillin/clavulanic acid followed by 500/125 mg amoxicillin/clavulanic acid 12 hourly for 5 days, Group B (amoxicillin/clavulanic acid prophylaxis) with a single preoperative dose of amoxicillin/clavulanic acid 875/125 mg tablets, and Group C (levofloxacin prophylaxis) with a single preoperative dose of levofloxacin 1000 mg tablets. All patients had ostectomy using surgical handpiece and burs and received same analgesics (tabs ibuprofen 400 mg 8 hourly for 3 days). Results: No case of surgical site infection or alveoli osteitis was recorded in the study groups. There were no statistically significant differences between the treatment groups with regard to pain, mouth opening, postoperative facial dimension, and body temperature. Conclusion: Amoxicillin/clavulanic acid as a single preoperative bolus should be adequate for the prevention of postoperative wound infection and alveoli osteitis following the third molar extraction as there is no need for an extension of the antibiotic. Moreover, levofloxacin can be utilized as prophylaxis in patients undergoing mandibular third molar extraction if such patients are allergic to penicillins. PMID:27843268

Uniform-large Area BaSrTiO3 Growth and Novel Material Designs to Enable Fabrication of High Quality, Affordable, and Performance Consistent Phase Shifters for OTM Phased Array Antennas

DTIC Science & Technology

2012-07-11

molar flux of each precursor entering the reactor. The molar fluxes for Ba , Sr , and Ti are measured and computed in real-time, and these measured values...allows control of the relative amounts of Ba , Sr , and Ti, and the overall total mass flow in umole/min reaching the substrate. In all, there are three...is the Ba:Sr ratio with depth (from the top of the film). The ratio of Ba to Sr was controlled from 0.87 to 0.43. The total film thickness is 130 nm

Chemical composition and strength of dolomite geopolymer composites

NASA Astrophysics Data System (ADS)

Aizat, E. A.; Al Bakri, A. M. M.; Liew, Y. M.; Heah, C. Y.

2017-09-01

The chemical composition of dolomite and the compressive strength of dolomite geopolymer composites were studied. The both composites prepared with mechanical mixer manufactured by with rotor speed of 350 rpm and curing in the oven for 24 hours at 80˚C. XRF analysis showThe dolomite raw materials contain fewer amounts of Si and Al but high Ca in its composition. Dolomite geopolymer composites with 20M of NaOH shows greater and optimum compressive strength compared to dolomite geopolymer with other NaOH molarity. This indicated better interaction of dolomite raw material and alkaline activator need high molarity of NaOH in order to increase the reactivity of dolomite.

Effect of cyclical forces on the periodontal ligament and alveolar bone remodeling during orthodontic tooth movement

PubMed Central

Kalajzic, Zana; Peluso, Elizabeth Blake; Utreja, Achint; Dyment, Nathaniel; Nihara, Jun; Xu, Manshan; Chen, Jing; Uribe, Flavio; Wadhwa, Sunil

2014-01-01

Objective To investigate the effect of externally applied cyclical (vibratory) forces on the rate of tooth movement, the structural integrity of the periodontal ligament, and alveolar bone remodeling. Methods Twenty-six female Sprague-Dawley rats (7 weeks old) were divided into four groups: CTRL (unloaded), VBO (molars receiving a vibratory stimulus only), TMO (molars receiving an orthodontic spring only), and TMO+VB (molars receiving an orthodontic spring and the additional vibratory stimulus). In TMO and TMO+VB groups, the rat first molars were moved mesially for 2 weeks using Nickel-Titanium coil spring delivering 25 g of force. In VBO and TMO+VB groups, cyclical forces at 0.4 N and 30 Hz were applied occlusally twice a week for 10 minutes. Microfocus X-ray computed tomography analysis and tooth movement measurements were performed on the dissected rat maxillae. Tartrate-resistant acid phosphatase staining and collagen fiber assessment were performed on histological sections. Results Cyclical forces significantly inhibited the amount of tooth movement. Histological analysis showed marked disorganization of the collagen fibril structure of the periodontal ligament during tooth movement. Tooth movement caused a significant increase in osteoclast parameters on the compression side of alveolar bone and a significant decrease in bone volume fraction in the molar region compared to controls. Conclusions Tooth movement was significantly inhibited by application of cyclical forces. PMID:23937517

Delayed onset infections after lower third molar germectomy could be related to the space distal to the second molar.

PubMed

Monaco, G; Cecchini, S; Gatto, M R; Pelliccioni, G A

2017-03-01

The onset of delayed infection after lower third molar germectomy is influenced by the amount of distal space. This retrospective study aimed to determine whether the incidence of delayed onset infection is related to the space distal to the second molar. The ratio between the distal space and the crown width, measured according to the Ganss protocol on panoramic radiographs, was obtained for 218 surgical germectomies performed for orthodontic reasons in 134 patients. A delayed onset infection occurred following 20 germectomies at between 2 and 8 weeks after surgery; purulent exudates from the alveolus and swelling were present. In 16 of the 20 cases of infection, a Ganss ratio of <0.5 showed the almost complete absence of space distal to the second molar. This study found that the distal space was significantly and inversely correlated with delayed onset infection (P=0.004). From a clinical point of view, it is important for the surgeon to be aware that a higher Ganss ratio may indicate that a delayed onset infection is less likely to occur and that a lower Ganss ratio could indicate a greater likelihood of this type of infection, so that the patient can be properly informed. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Synthesis of L-Ascorbyl Flurbiprofenate by Lipase-Catalyzed Esterification and Transesterification Reactions

PubMed Central

Sun, Li-rui; Wang, Yan; Xia, Chun-gu

2017-01-01

The synthesis of L-ascorbyl flurbiprofenate was achieved by esterification and transesterification in nonaqueous organic medium with Novozym 435 lipase as biocatalyst. The conversion was greatly influenced by the kinds of organic solvents, speed of agitation, catalyst loading amount, reaction time, and molar ratio of acyl donor to L-ascorbic acid. A series of solvents were investigated, and tert-butanol was found to be the most suitable from the standpoint of the substrate solubility and the conversion for both the esterification and transesterification. When flurbiprofen was used as acyl donor, 61.0% of L-ascorbic acid was converted against 46.4% in the presence of flurbiprofen methyl ester. The optimal conversion of L-ascorbic acid was obtained when the initial molar ratio of acyl donor to ascorbic acid was 5 : 1. kinetics parameters were solved by Lineweaver-Burk equation under nonsubstrate inhibition condition. Since transesterification has lower conversion, from the standpoint of productivity and the amount of steps required, esterification is a better method compared to transesterification. PMID:28421196

29 CFR 4206.3 - Credit against liability for a subsequent withdrawal.

Code of Federal Regulations, 2011 CFR

2011-07-01

... withdrawal liability in an amount greater than or equal to zero, determined in accordance with this part. If the credit determined under §§ 4206.4 through 4206.9 is less than zero, the amount of the credit shall equal zero. ...

29 CFR 4206.3 - Credit against liability for a subsequent withdrawal.

Code of Federal Regulations, 2013 CFR

2013-07-01

... withdrawal liability in an amount greater than or equal to zero, determined in accordance with this part. If the credit determined under §§ 4206.4 through 4206.9 is less than zero, the amount of the credit shall equal zero. ...

29 CFR 4206.3 - Credit against liability for a subsequent withdrawal.

Code of Federal Regulations, 2014 CFR

2014-07-01

... withdrawal liability in an amount greater than or equal to zero, determined in accordance with this part. If the credit determined under §§ 4206.4 through 4206.9 is less than zero, the amount of the credit shall equal zero. ...

29 CFR 4206.3 - Credit against liability for a subsequent withdrawal.

Code of Federal Regulations, 2010 CFR

2010-07-01

... withdrawal liability in an amount greater than or equal to zero, determined in accordance with this part. If the credit determined under §§ 4206.4 through 4206.9 is less than zero, the amount of the credit shall equal zero. ...

29 CFR 4206.3 - Credit against liability for a subsequent withdrawal.

Code of Federal Regulations, 2012 CFR

2012-07-01

... withdrawal liability in an amount greater than or equal to zero, determined in accordance with this part. If the credit determined under §§ 4206.4 through 4206.9 is less than zero, the amount of the credit shall equal zero. ...

Tributyltin impairs dentin mineralization and enamel formation in cultured mouse embryonic molar teeth.

PubMed

Salmela, Eija; Sahlberg, Carin; Alaluusua, Satu; Lukinmaa, Pirjo-Liisa

2008-11-01

Tributyltin (TBT), earlier used as an antifouling agent in marine paints, causes damage to the aquatic ecosystem, for example, impaired shell calcification in oysters. TBT affects hard tissue mineralization even in mammals: delayed bone mineralization has been observed in rodents exposed to TBT in utero. To see if TBT interferes with tooth development, especially dental hard tissue formation, we exposed mouse E18 mandibular first and second molars to 0.1, 0.5, 1.0, and 2.0 microM TBT chloride in organ culture for 7-12 days. The amount of enamel was assessed and the sizes of the first molars were measured from photographs taken after the culture. TBT concentration dependently impaired enamel formation (p < 0.001) and reduced tooth size (p < 0.001). Histological analysis showed slight arrest of dentin mineralization and enamel formation in first molars exposed to 0.1 microM TBT. At the concentration of 1.0 microM the effect was overt. The differentiation of ameloblasts in the mesial cusps was retarded but TBT had no effect on odontoblast morphology. The dental epithelium showed enhanced apoptosis. The failure of ameloblasts to form enamel was likely to be secondary to the effect of TBT on dentin mineralization. In the second molars, where predentin deposition had not started, ameloblasts and odontoblasts were nonpolarized and proliferative. The results showed that TBT concentration dependently impairs dental hard tissue formation and reduces tooth size in cultured mouse embryonic molars. The effects depend on the stage of tooth development at the start of exposure and may involve epithelial-mesenchymal interactions.

Effects of reaction pH on properties and performance of urea-formaldehyde resins

Treesearch

Chung-Yun Hse; Zhi-Yuan Xia; Bunchiro Tomita

1994-01-01

Urea formaldehyde resins were formulated with combination variables of three reaction pH (1.0, 4.8, and 8.0) and four molar ratios of formaldehyde to urea (2.5, 3.0, 3.5, and 4.0). The resins were prepared by placing all formaldehyde and water in reaction kettle and pH was adjusted with sulfuric acid and sodium hydroxide, respectively. Urea was added in 15 equal parts...

38 CFR 8.14 - Provision for extended term insurance-other than 5-year level premium term or limited convertible...

Code of Federal Regulations, 2012 CFR

2012-07-01

... the face value of the policy less any indebtedness for such time from the due date of the premium in... extended term insurance shall be for an amount of insurance equal to the face value of the policy less any... extended automatically as of insurance equal to (1) the Initial Face Amount of Insurance (face amount of...

Mandibular canine intrusion with the segmented arch technique: A finite element method study.

PubMed

Caballero, Giselle Milagros; Carvalho Filho, Osvaldo Abadia de; Hargreaves, Bernardo Oliveira; Brito, Hélio Henrique de Araújo; Magalhães Júnior, Pedro Américo Almeida; Oliveira, Dauro Douglas

2015-06-01

Mandibular canines are anatomically extruded in approximately half of the patients with a deepbite. Although simultaneous orthodontic intrusion of the 6 mandibular anterior teeth is not recommended, a few studies have evaluated individual canine intrusion. Our objectives were to use the finite element method to simulate the segmented intrusion of mandibular canines with a cantilever and to evaluate the effects of different compensatory buccolingual activations. A finite element study of the right quadrant of the mandibular dental arch together with periodontal structures was modeled using SolidWorks software (Dassault Systèmes Americas, Waltham, Mass). After all bony, dental, and periodontal ligament structures from the second molar to the canine were graphically represented, brackets and molar tubes were modeled. Subsequently, a 0.021 × 0.025-in base wire was modeled with stainless steel properties and inserted into the brackets and tubes of the 4 posterior teeth to simulate an anchorage unit. Finally, a 0.017 × 0.025-in cantilever was modeled with titanium-molybdenum alloy properties and inserted into the first molar auxiliary tube. Discretization and boundary conditions of all anatomic structures tested were determined with HyperMesh software (Altair Engineering, Milwaukee, Wis), and compensatory toe-ins of 0°, 4°, 6°, and 8° were simulated with Abaqus software (Dassault Systèmes Americas). The 6° toe-in produced pure intrusion of the canine. The highest amounts of periodontal ligament stress in the anchor segment were observed around the first molar roots. This tooth showed a slight tendency for extrusion and distal crown tipping. Moreover, the different compensatory toe-ins tested did not significantly affect the other posterior teeth. The segmented mechanics simulated in this study may achieve pure mandibular canine intrusion when an adequate amount of compensatory toe-in (6°) is incorporated into the cantilever to prevent buccal and lingual crown tipping. The effects on the posterior anchorage segment were small and initially concentrated on the first molar. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Laser vs bur for bone cutting in impacted mandibular third molar surgery: A randomized controlled trial

PubMed Central

Passi, Deepak; Pal, Uma Shankar; Mohammad, Shadab; Singh, Rakesh Kumar; Mehrotra, Divya; Singh, Geeta; Kumar, Manoj; Chellappa, Arul A.L.; Gupta, Chandan

2013-01-01

Background The aim of this study was to assess the feasibility of Er: YAG laser in bone cutting for removal of impacted lower third molar teeth and compare its outcomes with that of surgical bur. Materials & methods The study comprised 40 subjects requiring removal of impacted mandibular third molar, randomly categorized into two equal groups of 20 each, who had their impacted third molar removed either using Er: YAG laser or surgical bur as per their group, using standard methodology of extraction of impacted teeth. Clinical parameters like pain, bleeding, time taken for bone cutting, postoperative swelling, trismus, wound healing and complications were compared for both groups. Observation & result Clinical parameters like pain, bleeding and swelling were lower in laser group than bur group, although the difference was statistically not significant. However, postoperative swelling showed significant difference in the two groups. Laser group required almost double the time taken for bone cutting with bur. Trismus persisted for a longer period in laser group. Wound healing and complications were assessed clinically and there was no significant difference in both the groups. Conclusion Based on the results of our study, the possibility of bone cutting using lasers is pursued, the osteotomy is easily performed and the technique is better suited to minimally invasive surgical procedures. The use of Er: YAG laser may be considered as an alternative tool to surgical bur, specially in anxious patients. PMID:25737885

A parallel-group comparison study of celecoxib with loxoprofen sodium in third mandibular molar extraction patients.

PubMed

Yamashita, Y; Sano, N; Shimohira, D; Danjo, A; Goto, M

2014-12-01

Non-steroidal anti-inflammatory drugs (NSAIDs) are used widely, but they may damage the upper gastrointestinal mucosa owing to their mechanism of action. Selective cyclooxygenase 2 (COX-2) inhibitors are known to have a reduced risk for such damage. In this comparative study, the efficacy and safety of the selective COX-2 inhibitor celecoxib for pain after third mandibular molar extraction were compared with those of loxoprofen sodium. This was a parallel-group comparison study; 107 patients who had undergone third mandibular molar extraction were given celecoxib and 102 were given loxoprofen. The level of pain on a visual analogue scale (VAS) 15 min and 30 min after taking the experimental drug decreased over time, with no significant difference between the two groups. The percentage of patients taking a second dose was 64.5% for celecoxib and 80.4% for loxoprofen. The time to second dose was significantly longer for celecoxib (533.5 min) than for loxoprofen (387.4 min). There was no significant difference in the patients' impression of efficacy between the two groups, with ratings of 'excellent' and 'good' for 77.4% in the loxoprofen group and 74.5% in the celecoxib group. These results demonstrate that celecoxib is of equal clinical value to loxoprofen for acute pain after third mandibular molar extraction. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

29 CFR 1620.15 - Jobs requiring equal skill in performance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false Jobs requiring equal skill in performance. 1620.15 Section... EQUAL PAY ACT § 1620.15 Jobs requiring equal skill in performance. (a) In general. The jobs to which the equal pay standard is applicable are jobs requiring equal skill in their performance. Where the amount...

29 CFR 1620.15 - Jobs requiring equal skill in performance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Jobs requiring equal skill in performance. 1620.15 Section... EQUAL PAY ACT § 1620.15 Jobs requiring equal skill in performance. (a) In general. The jobs to which the equal pay standard is applicable are jobs requiring equal skill in their performance. Where the amount...

29 CFR 1620.15 - Jobs requiring equal skill in performance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false Jobs requiring equal skill in performance. 1620.15 Section... EQUAL PAY ACT § 1620.15 Jobs requiring equal skill in performance. (a) In general. The jobs to which the equal pay standard is applicable are jobs requiring equal skill in their performance. Where the amount...

29 CFR 1620.15 - Jobs requiring equal skill in performance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Jobs requiring equal skill in performance. 1620.15 Section... EQUAL PAY ACT § 1620.15 Jobs requiring equal skill in performance. (a) In general. The jobs to which the equal pay standard is applicable are jobs requiring equal skill in their performance. Where the amount...

12 CFR 741.3 - Criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

... amount at least equal to the net excess of book value over current market value of the investments. If the market value cannot be determined, an amount equal to the full book value will be established... exceeds the difference between book value and market value, the board of directors may authorize the...

12 CFR 741.3 - Criteria.

Code of Federal Regulations, 2011 CFR

2011-01-01

... amount at least equal to the net excess of book value over current market value of the investments. If the market value cannot be determined, an amount equal to the full book value will be established... exceeds the difference between book value and market value, the board of directors may authorize the...

Assessment of mercury and selenium tissular concentrations and total mercury body burden in 6 Steller sea lion pups from the Aleutian Islands.

PubMed

Correa, Lucero; Rea, Lorrie D; Bentzen, Rebecca; O'Hara, Todd M

2014-05-15

Concentrations of total mercury ([THg]) and selenium ([TSe]) were measured in several tissue compartments in Steller sea lion (Eumetopias jubatus) pups; in addition we determined specific compartment and body burdens of THg. Compartmental and body burdens were calculated by multiplying specific compartment fresh weight by the [THg] (summing compartment burdens equals body burden). In all 6 pup tissue sets (1) highest [THg] was in hair, (2) lowest [THg] was in bone, and (3) pelt, muscle and liver burdens contributed the top three highest percentages of THg body burden. In 5 of 6 pups the Se:Hg molar ratios among compartments ranged from 0.9 to 43.0. The pup with the highest hair [THg] had Se:Hg molar ratios in 9 of 14 compartments that were ⩽ 0.7 potentially indicating an inadequate [TSe] relative to [THg]. Copyright © 2014 Elsevier Ltd. All rights reserved.

SALT EFFECTS ON SWARMERS OF DUNALIELLA VIRIDIS TEOD

PubMed Central

Baas-Becking, L. G. M.

1931-01-01

1. Dunaliella viridis Teodoresco thrives equally well in solutions of NaCl 1 to 4 mol and pH 6 to 9. 2. The organism is sensitive to calcium and magnesium, especially in acid medium. 3. Calcium and magnesium are antagonistic. In a molar solution of NaCl the antagonistic relation Mg:Ca is 4 to 5. In a 4 molar solution of NaCl the proportion becomes many times as great (20:1). 4. Although the strains used in this investigation did not occur in sea water concentrates, the increase in the antagonistic ratio Mg:Ca in which they can live closely paralleled the changes in this ratio which take place when sea water evaporates. 5. The other organisms which occurred in the cultures each show a specific relation to Ca and Mg. 6. The size of the cells of Dunaliella does not decrease with increasing NaCl content. PMID:19872621

Oxygen reduction of several gold alloys in 1-molar potassium hydroxide

NASA Technical Reports Server (NTRS)

Miller, R. O.

1975-01-01

With rotated disk-and-ring equipment, polarograms and other electrochemical measurements were made of oxygen reduction in 1-molar potassium hydroxide on an equiatomic gold-copper (Au-Cu) alloy and a Au-Cu alloy doped with either indium (In) or cobalt (Co) and on Au doped with either nickel (Ni) or platinum (Pt). The results were compared with those for pure Au and pure Pt. The two-electron reaction dominated on all Au alloys as it did on Au. The polarographic results at lower polarization potentials were compared, assuming exclusively a two-step reduction. A qualified ranking of cathodic electrocatalytic activity on the freshly polished reduced disks was indicated: anodized Au Au-Cu-In Au-Cu Au-Cu-Co is equivalent or equal to Au-Pt Au-Ni. Aging in distilled water improved the electrocatalytic efficiency of Au-Cu-Co, Au-Cu, and (to a lesser extent) Au-Cu-In.

Optical and Thermo-optical Properties of Polyimide-Single-Walled Carbon Nanotube Films: Experimental Results and Empirical Equations

NASA Technical Reports Server (NTRS)

Smith, Joseph G., Jr.; Connell, John W.; Watson, Kent A.; Danehy, Paul M.

2005-01-01

The incorporation of single-walled carbon nanotubes (SWNTs) into the bulk of space environmentally durable polymers at loading levels greater than or equal to 0.05 wt % has afforded thin films with surface and volume resistivities sufficient for electrostatic charge mitigation. However, the optical transparency at 500 nm decreased and the thermo-optical properties (solar absorptivity and thermal emissivity) increased with increaed SWNT loading. These properties were also dependent on film thickness. The absorbance characteristics of the films as a function of SWNT loading and film thickness were measured and determined to follow the classical Beer-Lambert law. Based on these results, an empirical relationship was derived and molar absorptivities determined for both the SWNTs and polymer matrix to provide a predictive approximation of these properties. The molar absorptivity determined for SWNTs dispersed in the polymer was comparable to reported solution determined values for HiPco SWNTs.

Amount of substance and the proposed redefinition of the mole

NASA Astrophysics Data System (ADS)

Milton, M. J. T.; Mills, I. M.

2009-06-01

There has been considerable discussion about the merits of redefining four of the base units of the SI, including the mole. In this paper, the options for implementing a new definition for the mole based on a fixed value for the Avogadro constant are discussed. They are placed in the context of the macroscopic nature of the quantity amount of substance and the opportunity to introduce a system for molar and atomic masses with unchanged values and consistent relative uncertainties.

Detecting and distinguishing among covalent and non-covalent differences in proteins: Shiga toxins and prions

USDA-ARS?s Scientific Manuscript database

The structural variety of food associated contaminants is remarkable. This diversity spans compounds from small molecules to protein toxins to infectious proteins. The small molecules are stoichiometric toxins while the proteins are catalytic toxins. This means that the molar amount of a protein to...

Infinitely dilute partial molar properties of proteins from computer simulation.

PubMed

Ploetz, Elizabeth A; Smith, Paul E

2014-11-13

A detailed understanding of temperature and pressure effects on an infinitely dilute protein's conformational equilibrium requires knowledge of the corresponding infinitely dilute partial molar properties. Established molecular dynamics methodologies generally have not provided a way to calculate these properties without either a loss of thermodynamic rigor, the introduction of nonunique parameters, or a loss of information about which solute conformations specifically contributed to the output values. Here we implement a simple method that is thermodynamically rigorous and possesses none of the above disadvantages, and we report on the method's feasibility and computational demands. We calculate infinitely dilute partial molar properties for two proteins and attempt to distinguish the thermodynamic differences between a native and a denatured conformation of a designed miniprotein. We conclude that simple ensemble average properties can be calculated with very reasonable amounts of computational power. In contrast, properties corresponding to fluctuating quantities are computationally demanding to calculate precisely, although they can be obtained more easily by following the temperature and/or pressure dependence of the corresponding ensemble averages.

Micro computed tomography evaluation of the Self-adjusting file and ProTaper Universal system on curved mandibular molars.

PubMed

Serefoglu, Burcu; Piskin, Beyser

2017-09-26

The aim of this investigation was to compare the cleaning and shaping efficiency of Self-adjusting file and Protaper, and to assess the correlation between root canal curvature and working time in mandibular molars using micro-computed tomography. Twenty extracted mandibular molars instrumented with Protaper and Self-adjusting file and the total working time was measured in mesial canals. The changes in canal volume, surface area and structure model index, transportation, uninstrumented area and the correlation between working-time and the curvature were analyzed. Although no statistically significant difference was observed between two systems in distal canals (p>0.05), a significantly higher amount of removed dentin volume and lower uninstrumented area were provided by Protaper in mesial canals (p<0.0001). A correlation between working-time and the canal-curvature was also observed in mesial canals for both groups (SAFr 2 =0.792, p<0.0004, PTUr 2 =0.9098, p<0.0001).

Stabilization of Pb and As in soils by applying combined treatment with phosphates and ferrous iron.

PubMed

Xenidis, Anthimos; Stouraiti, Christina; Papassiopi, Nymphodora

2010-05-15

The chemical immobilization of Pb and As in contaminated soil from Lavrion, Greece, using monocalcium phosphate and ferrous sulfate as stabilizing agents was investigated. Monocalcium phosphate was added to contaminated soil at PO(4) to Pb molar ratios equal to 0, 0.5, 1, 1.5 and 2.5, whereas ferrous sulfate was added at Fe to As molar ratios equal to 0, 2.5, 5, 10 and 20. Phosphates addition to contaminated soil decreased Pb leachability, but resulted in significant mobilization of As. Simultaneous immobilization of Pb and As was obtained only when soil was treated with mixtures of phosphates and ferrous sulfate. Arsenic uptake by plants was also seen to increase when soil was treated only with phosphates, but co-addition of ferrous sulfate was efficient in maintaining As phytoaccumulation at low levels. The addition of at least 1.5M/M phosphates and 10M/M iron sulfate to soil reduced the dissolved levels of Pb and As in the water extracts to values in compliance with the EU drinking water standards. However, both additives contributed in the acidification of soil, decreasing pH from 7.8 to values as low as 5.6 and induced the mobilization of pH sensitive elements, such as Zn and Cd. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Electropulse treatment of water solution of humic substances in a layer iron granules in process of water treatment

NASA Astrophysics Data System (ADS)

Lobanova, G. L.; Yurmazova, T. A.; Shiyan, L. N.; Machekhina, K. I.

2016-02-01

The present work is a part of a continuations study of the physical and chemical processes complex in natural waters containing humic-type organic substances at the influence of pulsed electrical discharges in a layer of iron pellets. The study of humic substances processing in the iron granules layer by means of pulsed electric discharge for the purpose of water purification from organic compounds humic origin from natural water of the northern regions of Russia is relevant for the water treatment technologies. In case of molar humate sodium - iron ions (II) at the ratio 2:3, reduction of solution colour and chemical oxygen demand occur due to the humate sodium ions and iron (II) participation in oxidation-reduction reactions followed by coagulation insoluble compounds formation at a pH of 6.5. In order to achieve this molar ratio and the time of pulsed electric discharge, equal to 10 seconds is experimentally identified. The role of secondary processes that occur after disconnection of the discharge is shown. The time of contact in active erosion products with sodium humate, equal to 1 hour is established. During this time, the value of permanganate oxidation and iron concentration in solution achieves the value of maximum permissible concentrations and further contact time increase does not lead to the controlled parameters change.

7 CFR 252.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Donated food value return system means a system used by a processor or distributor to reduce the price of... issued to a distributor in an amount equal to the NCP contract value of donated foods contained in an end... recipient agency in an amount equal to the NCP contract value of donated foods contained in an end product...

24 CFR 582.110 - Matching requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., appropriate to the needs of the population being served, and at least equal in value to the aggregate amount... supportive services will be available to participants for the entire term of the rental assistance. The value... assistance provided that participant, nor does the value have to be equal to the amount of rental assistance...

24 CFR 582.110 - Matching requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., appropriate to the needs of the population being served, and at least equal in value to the aggregate amount... supportive services will be available to participants for the entire term of the rental assistance. The value... assistance provided that participant, nor does the value have to be equal to the amount of rental assistance...

24 CFR 582.110 - Matching requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., appropriate to the needs of the population being served, and at least equal in value to the aggregate amount... supportive services will be available to participants for the entire term of the rental assistance. The value... assistance provided that participant, nor does the value have to be equal to the amount of rental assistance...

24 CFR 582.110 - Matching requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., appropriate to the needs of the population being served, and at least equal in value to the aggregate amount... supportive services will be available to participants for the entire term of the rental assistance. The value... assistance provided that participant, nor does the value have to be equal to the amount of rental assistance...

24 CFR 582.110 - Matching requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., appropriate to the needs of the population being served, and at least equal in value to the aggregate amount... supportive services will be available to participants for the entire term of the rental assistance. The value... assistance provided that participant, nor does the value have to be equal to the amount of rental assistance...

24 CFR 2700.310 - Fees.

Code of Federal Regulations, 2011 CFR

2011-04-01

... equal to the annual premium for flood insurance required by § 2700.101(a)(4) (the lender shall pay the homeowner's flood insurance premium for that year to the extent it collects such an amount); and (4) An amount equal to the annual mortgage insurance premium required under § 2700.315. (b) Subsequent to the...

7 CFR 1405.9 - Commodity assessments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commodity assessments. (a) CCC will deduct from the proceeds of a marketing assistance loan an amount equal... collected in one of the following ways, as requested by the State, but not both: (i) When the proceeds of... the State. (2) CCC will deduct from the proceeds of a marketing assistance loan an amount equal to the...

5 CFR 550.114 - Compensatory time off.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) may grant compensatory time off from an employee's basic work requirement under a flexible work schedule under 5 U.S.C. 6122 instead of payment under § 550.113 for an equal amount of overtime work... duty instead of payment under § 550.113 for an equal amount of irregular or occasional overtime work...

Bone condition of the maxillary zygomatic process prior to orthodontic anchorage plate fixation.

PubMed

Präger, T M; Brochhagen, H G; Mischkowski, R; Jost-Brinkmann, P G; Müller-Hartwich, R

2015-01-01

The clinical success of orthodontic miniplates depends on the stability of the miniscrews used for fixation. For good stability, it is essential that the application site provides enough bone of good quality. This study was performed to analyze the amount of bone available for orthodontic miniplates in the zygomatic process of the maxilla. We examined 51 dental CT scans (Somatom Plus 4; Siemens, Erlangen, Germany) obtained from 51 fully dentate adult patients (mean age 24.0 ± 8.1 years; 27 male and 24 female) prior to third molar surgery. The amount of bone in the zygomatic process region at the level of the first molar root tips and at several other cranial levels as far as 15 mm from the root tips was measured Bone thickness at the root tip level averaged 4.1 ± 1.0 mm; the lowest value measured at this level in any of the patients was 2.7 mm. Bone thickness averaged 8.3 ± 1.0 mm at 15 mm cranial to the root tips; 6.9 mm was the lowest value. The zygomatic process appears to provide sufficient bone to accommodate screws for miniplate fixation. While some patients may possess a borderline amount of bone at more caudal levels, lack of volume is not a problem near the zygomatic bone.

Effect of Amount of Carbon on the Reduction Efficiency of Iron Ore-Coal Composite Pellets in Multi-layer Bed Rotary Hearth Furnace (RHF)

NASA Astrophysics Data System (ADS)

Mishra, Srinibash; Roy, Gour Gopal

2016-08-01

The effect of carbon-to-hematite molar ratio has been studied on the reduction efficiency of iron ore-coal composite pellet reduced at 1523 K (1250 °C) for 20 minutes in a laboratory scale multi-layer bed rotary hearth furnace (RHF). Reduced pellets have been characterized through weight loss measurement, estimation of porosity, shrinkage, qualitative and quantitative phase analysis by XRD. Performance parameters such as the degree of reduction, metallization, carbon efficiency, productivity, and compressive strength have been calculated to compare the process efficacy at different carbon levels in the pellets. Pellets with optimum carbon-to-hematite ratio (C/Fe2O3 molar ratio = 1.66) that is much below the stoichiometric carbon required for direct reduction of hematite yielded maximum reduction, better carbon utilization, and productivity for all three layers. Top layer exhibited maximum reduction at comparatively lower carbon level (C/Fe2O3 molar ratio <2.33) in the pellet, while bottom layer exceeded top layer reduction at higher carbon level (C/Fe2O3 molar ratio >2.33). Correlation between degree of reduction and metallization indicated non-isothermal kinetics influenced by heat and mass transfer in multi-layer bed RHF. Compressive strength of the partially reduced pellet with optimum carbon content (C/Fe2O3 molar ratio = 1.66) showed that they could be potentially used as an alternate feed in a blast furnace or any other smelting reactor.

Double versus single cartridge of 4% articaine infiltration into the retro-molar area for lower third molar surgery

PubMed Central

2017-01-01

Background There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. Method This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. Results The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P < 0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. Conclusion We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery. PMID:28879339

Double versus single cartridge of 4% articaine infiltration into the retro-molar area for lower third molar surgery.

PubMed

Sawang, Kamonpun; Chaiyasamut, Teeranut; Kiattavornchareon, Sirichai; Pairuchvej, Verasak; Bhattarai, Bishwa Prakash; Wongsirichat, Natthamet

2017-06-01

There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P < 0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery.

Oxidative desulfurization of dibenzothiophene from model oil using ionic liquids as extracting agent

NASA Astrophysics Data System (ADS)

Taha, Mohd F.; Atikah, N.; Chong, F. K.; Shaharun, Maizatul S.

2012-09-01

The oxidative desulfurization of dibenzothiophene (DBT) from model oil (in n-dodecane) was carried out using ionic liquid as the extractant and catalyst, and hydrogen peroxide (H2O2) in combination with acetic acid (CH3COOH) and sulphuric acid (H2SO4) as the oxidant. The ionic liquids used were 1-butyl-3-methylimidazolium octyl sulphate ([Bmim][OcSO4]) and 1-butyl-3-methylimidazolium acetate ([Bmim][Ac]). The effect of the amounts of H2O2 on oxidative desulphurization of model oil was first investigated without the usage of ionic liquids at room temperature. The results indicate that greater amount of H2O2 give higher desulfurization and the maximum desulfurization in this study, i.e. 34 %, was occurred when the molar ratio of H2O2 to sulfur was 5:1. With the usage of ionic liquid and the molar ratio of 5:1 (H2O2:sulfur), the efficiency of DBT removal from model oil was increased significantly in terms of percent removal and removal time. Ionic liquid of [Bmim][OcSO4] performed better than [Bmim][Ac] with 72 % DBT removal. When molar ratio of H2O2 to sulphur was 5:1, volume ratio of ionic liquid to model oil was 1:1 and mixing time was 60 min at room temperature. The results indicate the potential of ionic liquids as the extractant and catalyst for oxidative desulfurization of hydrocarbon fuels.

Effects of pulsed electromagnetic field vibration on tooth movement induced by magnetic and mechanical forces: a preliminary study.

PubMed

Darendeliler, M Ali; Zea, A; Shen, G; Zoellner, H

2007-12-01

This study was designed to determine whether or not high-frequency and low-magnitude vibration affects orthodontic tooth movement caused by magnetic or/and mechanical forces. Forty-four 7-week-old Wistar rats were randomly divided into four groups, with each group further divided into experimental and control subgroups. Neodymium-Iron-Boron (Nd-Fe-B) magnets and Sentalloy closed coil springs were placed between maxillary or mandibular first molars and incisors to activate tooth movement. The animals of experimental subgroups were exposed to the vibration induced by pulsed electromagnetic fields (PEMF) whilst the control subgroups were under normal atmosphere. The experiment lasted for 14 days and all of the animals were sacrificed for examination. The changes in the space between the molar and incisor were measured to indicate the amount of tooth movement. The coil springs, either with sham or active magnets, move molar much more than magnets alone, regardless of absence or presence of PEMF (p < 0.001). Under PEMF, the coil spring moved significantly more amount of tooth movement than that of coil-magnet combination (p < 0.01), as did the magnets compared to sham magnets (p < 0.019). Under a non-PEMF scenario, there was no significant difference in tooth movement between coil spring and coil-magnets combination, nor was there difference between magnets and sham magnets. It is suggested that the PEMF-induced vibration may enhance the effect of mechanical and magnetic forces on tooth movement.

Impact of adhesive surface and volume of luting resin on fracture resistance of root filled teeth.

PubMed

Krastl, G; Gugger, J; Deyhle, H; Zitzmann, N U; Weiger, R; Müller, B

2011-05-01

To investigate the correlation between geometric parameters of severely compromised root filled (RCT) pre-molar teeth with irregular root canals and their fracture resistance. The null hypothesis tested was that the fracture resistance of root filled teeth is not influenced by: (i) the adhesive surface of the post-space preparation (A(PS) ), (ii) the coronal tooth surface (A(A) ), (iii) the amount of resin cement (V(C) ) and (iv) the Young's modulus of the specimens. A total of 48 noncarious human pre-molar teeth with irregular root canals were decoronated, root filled and adhesively restored with post-retained direct composite crowns. After thermomechanical loading (1,200,000×, 5-50° C), static load was applied until failure. The geometric parameters of the tooth were evaluated by microcomputed tomography (μCT) using impressions taken after post-space preparation. Linear regression analyses were performed to correlate the geometric parameters of the specimens with their fracture resistance. The amount of resin cement (V(C) ) comprised up to 88% of the entire post-space (mean 67%) and had no impact on the maximal load (P = 0.88). The latter was significantly influenced by post-space preparation (P = 0.003). Amongst the geometric parameters tested, the surface area in the root canal had the greatest impact on fracture resistance of root filled pre-molars restored with posts and composite crowns, whilst the fit of the post was less important. © 2011 International Endodontic Journal.

Application of asymmetric flow field-flow fractionation (AF4) and multiangle light scattering (MALS) for the evaluation of changes in the product molar mass during PVP-b-PAMPS synthesis.

PubMed

Fuentes, Catalina; Castillo, Joel; Vila, Jose; Nilsson, Lars

2018-06-01

The use of polymers for the delivery of drugs has increased dramatically in the last decade. To ensure the desired properties and functionality of such substances, adequate characterization in terms of the molar mass (M) and size is essential. The aim of this study was to evaluate the changes in the M and size of PVP-b-PAMPS when the amounts of the synthesis reactants in the two-step radical reaction were varied. The determination of the M and size distributions was performed by an asymmetric flow field-flow fractionation (AF4) system connected to multiangle light scattering (MALS) and differential refractive index (dRI) detectors. The results show that the M of the polymers varies depending on the relative amounts of the reactants and that AF4-MALS-dRI is a powerful characterization technique for analyzing polymers. Using AF4, it was possible to separate the product of the first radical reaction (PVP-CTA) into two populations. The first population had an elongated, rod-like or random coil conformation, and the second had a conformation corresponding to homogeneous spheres or a microgel structure. PVP-b-PAMPS had only one population, which had a rod-like conformation. The molar masses of PVP-CTA and PVP-b-PAMPS found in this study were higher than those reported in previous studies.

Postoperative socket irrigation with drinking tap water reduces the risk of inflammatory complications following surgical removal of third molars: a multicenter randomized trial.

PubMed

Ghaeminia, H; Hoppenreijs, Th J M; Xi, T; Fennis, J P; Maal, T J; Bergé, S J; Meijer, G J

2017-01-01

The primary aim of the present study was to evaluate the effectiveness of postoperative irrigation of the socket with drinking tap water on inflammatory complications following lower third molar removal. A multicenter randomized controlled trial was carried out from June 2013 to June 2014. In one arm of the study, patients were instructed to irrigate the tooth socket and surgical site with a Monoject® Curved 412 Tip Syringe (Tyco/healthcare-Kendall, Mansfield, MA, USA) with tap water. In a second arm of the study, the standard postoperative instructions did not include irrigation instructions. The incidences of alveolar osteitis and wound infection were recorded for each group and analyzed by the Fisher's exact test. A total of 280 patients with 333 mandibular third molars were analyzed. According to the intention-to-treat (ITT) analysis, inflammatory complications occurred in 18 cases in the Monoject® group (11.4 %) compared to 34 cases (19.1 %) in the control group (p = 0.04). These complications were associated with significant worse outcomes regarding quality of life, pain, and trismus and caused significantly more missed days of work or study. Female gender, age >26, bone removal, deep impacted third molars, less experienced surgeons, and a high amount of debris at the surgical site were also identified as risk factors for developing inflammatory complications following lower third molar removal. Irrigation of the surgical site with drinking tap water using a curved syringe following removal of third molars is effective in reducing the risk of inflammatory complications. Water is a very accessible, cost-effective irrigant without side effects and the results from this study have proven that it can be used to reduce the risk of inflammatory complications and associated morbidity following lower third molar removal.

[Radiographic study of maxillary sinus associated with molars in adult].

PubMed

Hu, Zhi; Sun, Daming; Zhou, Quansheng; Wang, Yuli; Gu, Jingcheng; Han, Yaohua

2014-12-01

to explore the relationship between the maxillary sinus volume and the amount of alveolar bone, and the effect of molar loss upon the maxillary sinus was further analyzed,by measuring adult maxillary sinus volume, sinus ridge distance, and calculating the gasification coefficient of maxillary sinus. One hundred and ninety cases (361 maxillary sinus) with CT examinations were collected, they were divided into group A and group B, 121 cases (242 maxillary sinus) of normal subjects served as group A, 42 cases (65 maxillary sinus) with molar part off were B group, in which 31 maxillary sinus with a molar loss were group B1,22 maxillary sinus with two molar loss were B2 group,12 maxillary sinus with three molar loss (one molar remains) were B3 group, 27 cases (54 maxillary sinus) with upper teeth off were C group. Bymeasureing the maxillary sinus volume, sinus ridge distance and the size of the maxillary sinus, calculating the gasification coefficient, we analyzed the relationship between maxillary volume and sinus ridge distance, and comparatively analyzed the differences among the three groups in the size, gasification coefficient, volume of maxillary sinus and sinus ridge distance. In the normal group,the volume of maxillary sinus and sinus ridge distance had a correlation coefficient of -0. 63,(P< 0.05); Sinus ridge distance in group A was larger than the other two groups (P<0.05), and larger in B group than in C group (P<0. 05), anteroposterior maxillary sinus diameter and reft-right diameter in C group was greater than in A group and B group(P<0.05), group C gasification coeffiecent was less than A group and B group (P<0. 05). The volume of maxillary sinus is negatively correlated with the amont of alveolar bone; Upper teeth's shedding promotes maxillary sinus deformation; Maxiuary sinus volume has a tendency to decrease.

Longitudinal eruptive and posteruptive tooth movements, studied on oblique and lateral cephalograms with implants.

PubMed

Zhang, Xiaoyun; Baumrind, Sheldon; Chen, Gui; Chen, Huizhong; Liang, Yi; Xu, Tianmin

2018-05-01

The purpose of this study was to investigate the eruptive and posteruptive tooth displacements of untreated growing subjects longitudinally and the potential connections between posteruptive displacement of the maxillary and mandibular first molars and skeletal facial growth. The sample comprised 11 series of right 45° oblique cephalograms and lateral cephalograms of untreated children with metallic implants of the Björk type obtained from the archives of a growth study. Cephalograms generated at approximately 2-year intervals between the ages of 8.5 and 16 years were selected and traced. Superimpositions of serial tracings of oblique cephalograms on stable intraosseous implants were made to determine the displacements of buccal segment teeth in both arches, and superimpositions of serial tracings of lateral cephalograms were used to evaluate growth of the jaws. Continuous mesial tipping of the maxillary molars was observed from 8.5 to 16 years of age, averaging 8.2° ± 5.5° for the first molars and 18.3°± 8.5° for the second molars. Compared with the maxillary molars, the mandibular first molars showed less change in angulation except in the later mixed dentition when more than half of the subjects had accelerated forward tipping of the first molar in the late mixed dentition associated with migration into the leeway space. Average amounts of cumulative eruption from 8.5 to 16 years of age were 12.1 ± 2.1 mm downward and 3.8 ± 1.7 mm forward for the maxillary first molar. The mandibular first molar showed 8.6 ± 2.3 mm of eruption and 4.4 ± 1.9 mm of mesial migration. Peak velocity of vertical eruption of the maxillary and mandibular first molars corresponded to the skeletal vertical growth spurt. The maxillary canines and first premolars showed remarkable and continuous uprighting migration during eruption, averaging 9.5° ± 5.0° and 10.5° ± 6.7°, respectively. However, when they erupted into the occlusion, their changes in angulation reverted to forward tipping. The same tendency was also found in the mandibular canines and first premolars. Remarkable eruption and migration occur to the teeth of both arches during childhood and adolescence. Rates of first molar eruption during adolescence follow the general pattern of somatic growth. We infer that maintaining the original distal crown angulation of the maxillary molars may be an effective protocol for preservation of anchorage. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Effect of different levels of an ascorbic acid and tea mixture on nonheme iron absorption from a typical Tunisian meal fed to healthy rats.

PubMed

Hamdauoui, M; Doghri, T; Tritar, B

1995-01-01

The aim of our study was to evaluate the bioavailability of iron from a typical Tunisian meal 'couscous' provided to healthy rats with or without appropriate mixtures of tea plus ascorbic acid and to search for the optimal amount of ascorbic acid able to overcome the inhibitory effect of tea prepared under realistic Tunisian circumstances. Our findings show that a tea decoction (100 mg/ml) reduced nonheme iron absorption from couscous by 50% (16.5 vs. 33.1%; p < 0.01). In contrast, administration of 20 mg ascorbic acid increased nonheme iron absorption from couscous by more than 100% (66.8 vs. 33.1%; p < 0.001). Administration of ascorbic acid (20 mg) in a tea decoction (100 mg/ml) completely counteracted the inhibiting effect of tea and significantly improved the nonheme iron absorption from couscous (34 vs. 33% in the control group; NS). The same effect was shown when 10 mg ascorbic acid was added to the tea decoction; however, 5 mg ascorbic acid was not able to overcome the inhibitory effect of tea on nonheme iron absorption from couscous (33.1 vs. 19.4%; p < 0.01). Our findings demonstrate that a molar ratio of ascorbic acid and tea equal or superior to 0.25 or 0.50 is necessary to overcome the inhibitory effect in rats of tea prepared under Tunisian circumstances. In relation to human nutrition, for Tunisians who regularly drink tea, we suggest a much greater amount of ascorbic acid than that normally recommended for normal subjects.

Comparison of intrusion effects on maxillary incisors among mini implant anchorage, j-hook headgear and utility arch.

PubMed

Jain, Ravindra Kumar; Kumar, Sridhar Prem; Manjula, W S

2014-07-01

Intrusion of maxillary incisors is one of the most important and difficult tooth movements to achieve as a part of orthodontic therapy. A variety of techniques were used in the past to intrude the maxillary incisors before the emergence of mini implants in Orthodontics. Mini implants are temporary anchorage devices used to produce various tooth movements. The research was carried out to evaluate and compare the efficiency of producing intrusion of maxillary incisors using mini implants, utility arch and j- hook headgear. The study was conducted on 30 subjects divided into 3 Groups equally. Group 1- mini implant anchorage, Group 2 - j- hooks headgear and Group 3- utility arch were used for intrusion of the maxillary incisors. Conventional lateral cephalograms were taken before treatment and at the end of intrusion. Five cephalometric parameters were used to measure the amount of intrusion attained in each Group. Intra Group comparisons were done using student t-test and inter Group comparisons were done using ANOVA The duration of intrusion was four months in all the three Groups. In Group 1 the mean average intrusion attained was 2.1 mm, the mean average intrusion attained in Group 2 was 0.7 mm, and the mean average intrusion achieved in Group 3 was 1.4 mm with a side effect of 0.75 mm of molar extrusion. Although, both mini implants and utility arch can be used to attain significant amounts of incisor intrusion but using mini implants will produce true intrusion without any other side effects.

[Histomorphometric evaluation of ridge preservation after molar tooth extraction].

PubMed

Zhan, Y L; Hu, W J; Xu, T; Zhen, M; Lu, R F

2017-02-18

To evaluate bone formation in human extraction sockets with absorbed surrounding walls augmented with Bio-Oss and Bio-Gide after a 6-month healing period by histologic and histomorphometric analyses. Six fresh molar tooth extraction sockets in 6 patients who required periodontally compromised moral tooth extraction were included in this study. The six fresh extraction sockets were grafted with Bio-Oss particle covered with Bio-Gide. The 2.8 mm×6.0 mm cylindric bone specimens were taken from the graft sites with aid of stent 6 months after the surgery. Histologic and histomorphometric analyses were performed. The histological results showed Bio-Oss particles were easily distinguished from the newly formed bone, small amounts of new bone were formed among the Bio-Oss particles, large amounts of connective tissue were found. Intimate contact between the newly formed bone and the small part of Bio-Oss particles was present. All the biopsy cylinders measurement demonstrated a high inter-individual variability in the percentage of the bone, connective tissues and Bio-Oss particles. The new bone occupied 11.54% (0-28.40%) of the total area; the connective tissues were 53.42% (34.08%-74.59%) and the Bio-Oss particles were 35.04% (13.92%-50.87%). The percentage of the particles, which were in contact with bone tissues, amounted to 20.13% (0-48.50%). Sites grafted with Bio-Oss particles covered with Bio-Gide were comprised of connective tissues and small amounts of newly formed bone surrounding the graft particles.

Etiopathogenesis of Mandibulofacial and Maxillofacial Abscesses in Mice

PubMed Central

2010-01-01

The etiologic agent of mandibulofacial and maxillofacial abscesses in mice is reportedly coagulase-positive Staphylococcus aureus. Although suggested to be through the oral cavity, the exact route of entry has not been documented. Among the clinical cases of mandibulofacial and maxillofacial abscess we report here, each case that was cultured yielded coagulase-positive S. aureus. Histologically, all of the abscesses examined were directly associated with intralesional hair shafts, both vibrissae and pelage, that were introduced into the submucosa via the maxillary or mandibular molar gingival sulci. Grossly, a variable amount of hair was imbedded in the lingual, buccal, or mesial gingival sulci of the maxillary or mandibular molars or both. Computed tomography revealed that the presence of the hair resulted in inflammation and resorption of alveolar bone. With these findings, we propose that mandibulofacial and maxillofacial abscesses are induced by the mastication and fragmentation of hair ingested during the barbering process. From the resulting foreign body periodontitis, abscess formation originates at the maxillary lingual, buccal, or mesial gingival sulci, resulting in infection of the maxillary molar tooth roots with swelling or rupture through the skin inferior to the eye, or at the mandibular lingual, buccal, and or mesial gingival sulci, resulting in infection of the mandibular molar tooth roots and osteomyelitis with drainage through the skin of the ventral mandible. PMID:20579435

Effects of Ni(2+) on aluminum hydroxide scale formation and transformation on a simulated drinking water distribution system.

PubMed

Wang, Wendong; Song, Shan; Zhang, Xiaoni; Mitchell Spear, J; Wang, Xiaochang; Wang, Wen; Ding, Zhenzhen; Qiao, Zixia

2014-07-01

Observations of aluminum containing sediments/scales formed within the distribution pipes have been reported for several decades. In this study, the effect of Ni(2+) on the formation and transformation processes of aluminum hydroxide sediment in a simulated drinking water distribution system were investigated using X-ray diffraction spectrum (XRD), Fourier transform infrared spectrum (FT-IR), scanning electron microscope (SEM), and thermodynamic calculation methods. It was determined that the existence of Ni(2+) had notable effects on the formation of bayerite. In the system without Ni(2+) addition, there was no X-ray diffraction signal observed after 400 d of aging. The presence of Ni(2+), however, even when present in small amounts (Ni/Al=1:100) the formation of bayerite would occur in as little as 3d at pH 8.5. As the molar ratio of Ni/Al increase from 1:100 to 1:10, the amount of bayerite formed on the pipeline increased further; meanwhile, the specific area of the pipe scale decreased from 160 to 122 m(2)g(-1). In the system with Ni/Al molar ratio at 1:3, the diffraction spectrum strength of bayerite became weaker, and disappeared when Ni/Al molar ratios increased above 1:1. At these highs Ni/Al molar ratios, Ni5Al4O11⋅18H2O was determined to be the major component of the pipe scale. Further study indicated that the presence of Ni(2+) promoted the formation of bayerite and Ni5Al4O11⋅18H2O under basic conditions. At lower pH (6.5) however, the existence of Ni(2+) had little effect on the formation of bayerite and Ni5Al4O11⋅18H2O, rather the adsorption of amorphous Al(OH)3 for Ni(2+) promoted the formation of crystal Ni(OH)2. Copyright © 2013 Elsevier Ltd. All rights reserved.

Quantitative analysis of the orthodontic and orthopedic effects of maxillary traction.

PubMed

Baumrind, S; Korn, E L; Isaacson, R J; West, E E; Molthen, R

1983-11-01

This article analyzes differences in displacement of ANS and of the upper first molar when different vectors of force are delivered to the maxilla in non-full-banded Phase I mixed-dentition treatment of Class II malocclusion. The sample is identical to that for which we have previously reported differences in change in several key measures of mandibular and facial shape. It includes a cervical-traction group, a high-pull-to-upper-molar group, a modified-activator group, and an untreated Class II control group. Using newly developed computer-conducted procedures, which are described, we have been able to partition the orthodontic and orthopedic components of upper molar displacement and also to isolate treatment effects from those attributable to spontaneous growth and development. In the region of ANS, small but statistically significant and clinically meaningful differences were noted between treatments. When the intercurrent effects of growth and development had been factored out (Table III), orthopedic distal displacement of ANS was significantly greater in the high-pull and cervical groups than in the activator group. Orthopedic downward displacement of ANS was seen to be significantly greater in the cervical group than in the high-pull and activator groups. In the region of the first molar cusp, mean distal displacement of the tooth as an orthopedic effect was found to be almost identical in the cervical and high-pull groups (although variability was greater in the cervical group), but the mean orthodontic effect was significantly greater in the high-pull group than in the cervical group. In the cervical group, where relatively light forces were used for relatively long treatment periods on average, more of the total distal displacement of the upper molar was of an orthopedic character than of an orthodontic character. Conversely, in the high-pull group, in which relatively heavier forces tended to be used for briefer treatment periods, most of the distal displacement at the upper molar was of an orthodontic character. These observations are contrary to expectations from conventional orthodontic theory. In the activator-treated group, roughly equal components of the treatment-associated distal displacement of the upper molar were of the orthodontic and orthopedic types. As concerns changes in the vertical direction in the region of the molar cusp, significant intrusion of both the orthopedic and orthodontic types was seen in the high-pull sample as compared to each of the other groups examined.(ABSTRACT TRUNCATED AT 400 WORDS)

27 CFR 72.40 - Acquisition for official use and sale for account of petitioner in allowed petitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED... delegate pays to the petitioner, out of the proper appropriation, an amount equal to the balance, if any... the proper appropriation, an amount equal to the balance, if any, of the selling price after deduction...

27 CFR 72.40 - Acquisition for official use and sale for account of petitioner in allowed petitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED... delegate pays to the petitioner, out of the proper appropriation, an amount equal to the balance, if any... the proper appropriation, an amount equal to the balance, if any, of the selling price after deduction...

34 CFR 628.31 - What selection criteria does the Secretary use in evaluating an application for an endowment...

Code of Federal Regulations, 2011 CFR

2011-07-01

... value to the applicant's existing endowment and quasi-endowment funds over the applicant's four fiscal... funds, the Secretary— (i) Subtracts from an amount equal to the market value of the applicant's... section an amount equal to the market value of the applicant's endowment and quasi-endowment funds at the...

Fourier transform infrared characterization of the acidic phosphoric extractant system containing lanthanide

NASA Astrophysics Data System (ADS)

Shen, Y.-H.; Yao, S.-K.; Wang, D.-J.; Zhou, Weijin; Li, Ying Xue; Peng, Q.; Wu, JinGuang; Xu, Guang-Xian

1994-01-01

The aggregation states and FTIR spectra of the extractive organic phases of saponified HDEHP [di(2-ethylhexyl) phosphoric acid] (1). DMHPA [di(1-methylheptyl) phosphoric acid] (2) and (HDEHP + DMHPA) (3) containing lanthanides were studied, respectively. Transparent solution formed in system (1) while transparent gel formed in system (2) when the loading of lanthanides was more than 50%. The aggregation state of system (3) depends on the molar ratio of HDEHP:DMHPA and the loading percentage of lanthanide. From their FTIR spectra, it can be seen that the P equals O band of gel split into 1164, 1199, and 1232 cm-1, and the P-O-C band split into 1015, 1076, and 1083 cm-1 as well. The results suggested that the aggregation state of lanthanide complex changes considerably in the three systems, and multiple coordination states of p equals o with lanthanide result in the band split. Multiple interactions between P equals O, P-O-C and lanthanide ions form 3-D network in the gel.

Comparison of the cleaning capacity of Mtwo and Pro Taper rotary systems and manual instruments in primary teeth

PubMed Central

Azar, Mohammad Reza; Safi, Laya; Nikaein, Afshin

2012-01-01

Background: Root canal cleaning is an important step in endodontic therapy. In order to develop better techniques, a new generation of endodontic instruments has been designed. The aim of this study was to compare the effectiveness of manual K-files (Mani Co, Tokyo, Japan) and two rotary systems–Mtwo (Dentsply-Maillefer, Ballaigues, Switzerland) and ProTaper (VDW, Munich, Germany)–for root canal preparation in primary molars. Materials and Methods: India ink was injected to 160 mesiobuccal and distal root canals of mandibular primary molars. The teeth were randomly divided into three experimental groups and one control group. In each experimental group, either manual instruments (K-files) or rotary instruments (Mtwo or ProTaper) were used to prepare root canals. After cleaning the canals and clearing the teeth, ink removal was evaluated with a stereomicroscope. Statistical analysis was done with Kruskal–Wallis and Friedman tests. Results: There were no significant differences in cleaning efficiency between manual and rotary instruments. Only ProTaper files performed significantly better in the coronal and middle thirds than in the apical third of the root canal. Conclusion: Manual K-files and the Mtwo and ProTaper rotary systems showed equally acceptable cleaning ability in primary molar root canals. PMID:22623929

Enamel for high-temperature superalloys

NASA Technical Reports Server (NTRS)

Levin, H.; Lent, W. E.

1977-01-01

Desired optical and high temperature enamel properties are obtained with glasses prepared from the system Li2O-ZrO2-nSiO2. Molar compositions range from n=4 to n=1.3, to which are added minor amounts in varying combinations of alumina, alkali fluorides, boric oxide, alkali oxides, and akaline earth oxides.

Remodeling of alveolar bone crest after molar intrusion with skeletal anchorage system in dogs.

PubMed

Kanzaki, Reiko; Daimaruya, Takayoshi; Takahashi, Ichiro; Mitani, Hideo; Sugawara, Junji

2007-03-01

The aim of this study was to clarify the influence of supra-alveolar fibers on alveolar bone crest remodeling when several teeth are intruded simultaneously. The skeletal anchorage system was used to bilaterally intrude the second and third premolars of 10 beagles; supracrestal fiberotomies were performed on 1 side only. The amount of intrusion was greater and the amount of alveolar bone resorption was smaller in the fiberotomy group compared with the nonfiberotomy group. The health status (pocket depth <3 mm) of the dentogingival unit was maintained in the nonfiberotomy group during the experimental period. In the fiberotomy group, the number of osteoclasts on the marginal alveolar crest was less than in the nonfiberotomy group. The dense fiber bundles connecting the second and third premolars and the gingival attachments were maintained in the nonfiberotomy group. Pressure from the supra-alveolar fibers generated by segmental molar intrusion with the skeletal anchorage system induced alveolar bone crest resorption and remodeling, and, as a result, it prevented deepening of the gingival pocket. Periodontal status was good during tooth intrusion.

Can Exosomes Induced by Breast Involution Be Markers for the Poor Prognosis and Prevention of Postpartum Breast Cancer?

DTIC Science & Technology

2014-07-01

in rodents versus humans and whether the same isolation technique will yield exosomes that are equally useful in subsequent functional assays...exosome isolation by PEG based precipitation method, equal amounts of plasma and PEG 6000 were incubated overnight at 4°C on a rotating shaker followed by...Blotting: Equal amounts of proteins from Exosome samples (20 μg) were loaded onto 10% Tris gels in. Gels were run at an initial voltage of 60V thought eh

Phosphorus mobilization in rewetted fens: the effect of altered peat properties and implications for their restoration.

PubMed

Zak, Dominik; Wagner, Carola; Payer, Brian; Augustin, Jürgen; Gelbrecht, Jörg

2010-07-01

Rewetting of drained fens is necessary to stop further soil degradation and to reestablish important ecological functions. However, substantial changes of peat characteristics in the upper soil layers, due to drainage and land use, could counteract their recovery as nutrient-poor systems for an unknown period. We assessed the importance of altered peat properties, such as the degree of peat decomposition and the amount of redox-sensitive phosphorus (P) compounds, for P mobilization in different degraded fens. An experimental design involving 63 intact peat cores from fens with varying drainage and land-use histories was developed to quantify the mobilization of P, as well as that of iron (Fe), ammonium, carbon dioxide, and methane, all indicators of organic-matter decomposition and/or P-releasing processes. We found that net P release rates in peat cores with highly decomposed peat (range: 0.1-52.3 mg P x m(-2) x d(-1)) were significantly correlated to the amount of P bound to redox-sensitive compounds and the molar Fe:P as well as Al:P ratios of peat. We conclude that the following general rules apply for P mobilization in rewetted fens: (1) elevated levels of P release rates and P concentrations in pore water up to three orders of magnitude larger than under natural reference conditions can only be expected for rewetted fens whose surface soil layers consist of highly decomposed peat; (2) peat characteristics, such as the amount of P bound to redox-sensitive Fe(III) compounds (positive correlation) and molar ratios of Fe:P or Al:P (negative correlations), explain the high range of P release rates; and (3) a critical P export to adjacent lakes or rivers can only be expected if molar Fe:P ratios of highly decomposed peat are less than 10.

Limits to preference and the sensitivity of choice to rate and amount of food.

PubMed

Aparicio, Carlos F; Baum, William M; Hughes, Christine E; Pitts, Raymond C

2016-03-01

Studies of choice holding food-amount ratio constant while varying food-rate ratio within sessions showed that local changes in preference depend on relative amount of food. The present study investigated whether sensitivity of choice to food-rate ratio and sensitivity to food-amount ratio are independent of one another when food-rate ratios are varied across sessions and food-amount ratios are varied within sessions. Food deliveries for rats' presses on the left and right levers were scheduled according to three different food-rate ratios of 1:1, 9:1, and 1:9; each food-rate ratio lasted for 106 sessions and was arranged independently of seven food-amount ratios (7:1, 6:2, 5:3, 4:4, 3:5, 2:6, and 1:7 food pellets) occurring within sessions in random sequence. Each amount ratio lasted for 10 food deliveries and was separated from another by a 60-s blackout. Sensitivity to rate ratio was high (1.0) across food deliveries. Sensitivity to amount ratio was low when food rates were equal across alternatives, but was high when rate ratio and amount ratio opposed one another. When rate ratio and amount ratio went in the same direction, choice ratio reached an elevenfold limit which reduced sensitivity to approximately zero. We conclude that three factors affect sensitivity to amount: (1) the limit to preference, (2) the equal effect on preference of amounts greater than four pellets, and (3) the absence of differential effects of switches in amount in the equal-rates (1:1) condition. Taken together, these findings indicate that rate and amount only sometimes combine independently as additive variables to determine preference when amount ratios vary frequently within sessions. © 2016 Society for the Experimental Analysis of Behavior.

A counter-intuitive approach to calculating non-exchangeable 2H isotopic composition of hair: treating the molar exchange fraction fE as a process-related rather than compound-specific variable

USGS Publications Warehouse

Landwehr, J.M.; Meier-Augenstein, W.; Kemp, H.F.

2011-01-01

Hair is a keratinous tissue that incorporates hydrogen from material that an animal consumes but it is metabolically inert following synthesis. The stable hydrogen isotope composition of hair has been used in ecological studies to track migrations of mammals as well as for forensic and archaeological purposes to determine the provenance of human remains or the recent geographic life trajectory of living people. Measurement of the total hydrogen isotopic composition of a hair sample yields a composite value comprised of both metabolically informative, non-exchangeable hydrogen and exchangeable hydrogen, with the latter reflecting ambient or sample preparation conditions. Neither of these attributes is directly measurable, and the non-exchangeable hydrogen composition is obtained by estimation using a commonly applied mathematical expression incorporating sample measurements obtained from two distinct equilibration procedures. This commonly used approach treats the fraction of exchangeable hydrogen as a mixing ratio, with a minimal procedural fractionation factor assumed to be close or equal to 1. Instead, we propose to use full molar ratios to derive an expression for the non-exchangeable hydrogen composition explicitly as a function of both the procedural fractionation factor α and the molar hydrogen exchange fraction fE. We apply these derivations in a longitudinal study of a hair sample and demonstrate that the molar hydrogen exchange fraction fE should, like the procedural fractionation factor α, be treated as a process-dependent parameter, i.e. a reaction-specific constant. This is a counter-intuitive notion given that maximum theoretical values for the molar hydrogen exchange fraction fE can be calculated that are arguably protein-type specific and, as such, fE could be regarded as a compound-specific constant. We also make some additional suggestions for future approaches to determine the non-exchangeable hydrogen composition of hair and the use of standards.

Influence of Cd2+/S2- molar ratio and of different capping environments in the optical properties of CdS nanoparticles incorporated within a hybrid diureasil matrix

NASA Astrophysics Data System (ADS)

Gonçalves, Luis F. F. F.; Silva, Carlos J. R.; Kanodarwala, Fehmida K.; Stride, John A.; Pereira, Mario R.; Gomes, Maria J. M.

2014-09-01

The incorporation of CdS nanoparticles (NPs), as prepared through colloidal methods using reverse micelles, within diureasil hybrid organic-inorganic sol-gel matrices was investigated. Several experimental conditions, namely the influence of capping agent 3-mercaptopropyltrimethoxysilane (MPTMS) or the use of tetraethoxysilane (TEOS), were studied in order to assure the preservation of the original optical properties of colloidal CdS NPs after the incorporation of the NPs within the solid diureasil hybrid matrix. The diureasil matrix is based on a siliceous network cross linked through urea bonds to poly(oxyethylene)/poly(oxypropylene) (PEO/PPO) chains. The influence of the Cd2+/S2- molar ratio of the NPs in the stability and dispersion of the NPs within the diureasil matrix was also investigated. The obtained CdS doped hybrid matrix was characterized by absorption, steady-state and time-resolved photoluminescence (PL) spectroscopy and by transmission electron microscopy (TEM). The stability of the CdS NPs within the hybrid matrix showed to be dependent on the Cd2+/S2- molar ratio used in the synthesis of the NPs. The use of MPTMS proved to be crucial in the preservation of the original optical properties of the colloidal CdS NPs after the incorporation of the NPs within the hybrid matrix. The effect of MPTMS was in turn influenced by the Cd2+/S2- molar ratio employed in the synthesis of the CdS NPs. The use of MPTMS was less effective when Cd2+/S2- molar ratio equal to 0.5 was used. In the absence of MPTMS or TEOS larger NPs size distribution and clustering of the CdS NPs were obtained after the transfer of the NPs into the hybrid matrix.

Identification of Calcium Sulphoaluminate Formation between Alunite and Limestone

PubMed Central

Kim, Hyung-Seok; Han, Gi-Chun; Ahn, Ji-Whan; Cho, Kye-Hong; Cho, Hee-Chan

2009-01-01

This study was carried out to identify the conditions of formation of calcium sulphoaluminate (3CaO·3Al2O3·CaSO4) by the sintering of a limestone (CaCO3) and alunite [K2SO4·Al2(SO4)3·4Al(OH)3] mixture with the following reagents: K2SO4, CaCO3, Al(OH)3, CaSO4·2H2O, and SiO2. When K2SO4, CaCO3, Al(OH)3, CaSO4·2H2O were mixed in molar ratios of 1:3:6:3 and sintered at 1,200∼1,300 °C, only 3CaO·3Al2O3·CaSO4 and calcium langbeinite (2CaSO4·K2SO4) were generated. With an amount of CaO that is less than the stoichiometric molar ratio, 3CaO·3Al2O3·CaSO4 was formed and anhydrite (CaSO4) did not react and remained behind. With the amount of CaSO4 that is less than the stoichiometric molar ratio, the amounts of 3CaO·3Al2O3·CaSO4 and 2CaSO4·K2SO4 decreased, and that of CaO·Al2O3 increased. In the K2SO4-CaO-Al2O3-CaSO4-SiO2 system, to stabilize the formation of 3CaO·3Al2O3·CaSO4, 2CaSO4·K2SO4, and β-2CaO·SiO2, the molar ratios of CaO: Al2O3: CaSO4 must be kept at 3:3:1 and that of CaO/SiO2, over 2.0; otherwise, the generated amount of 3CaO·3Al2O3·CaSO4 decreased and that of gehlenite (2CaO·Al2O3·SiO2) with no hydration increased quantitatively. Therefore, if all SO3(g) generated by the thermal decomposition of alunite reacts with CaCO3 (or CaO, the thermal decomposition product of limestone) to form CaSO4 in an alunite- limestone system, 1 mol of pure alunite reacts with 6 mol of limestone to form 1 mol of 3CaO·3Al2O3·CaSO4 and 1 mol of 2CaSO4·K2SO4. PMID:22346687

Effect of Oxygen-Supply Rates on Growth of Escherichia coli

PubMed Central

McDaniel, L. E.; Bailey, E. G.; Zimmerli, A.

1965-01-01

The effect of oxygen-supply rates on bacterial growth was studied in commercially available unbaffled and baffled flasks with the use of Escherichia coli in a synthetic medium as a test system. The amount of growth obtained depended on the oxygen-supply rate. Based on oxygen-absorption rates (OAR) measured by the rate of sulfite oxidation, equal OAR values in different types of flasks did not give equal amounts of growth. However, growth was essentially equal at the equal sulfite-oxidation rates when these were determined in the presence of killed whole cultures. Specific growth rates were reduced only at oxygen-supply rates much lower than those at which the total amount of growth was reduced. For the physical set-up used in this work and with the biological system employed, Bellco 598 flasks and flasks fitted with Biotech stainless-steel baffles gave satisfactory results at workable broth volumes; unbaffled and Bellco 600 flasks did not. PMID:14264837

Micro-computed tomographic comparison of nickel-titanium rotary versus traditional instruments in C-shaped root canal system.

PubMed

Yin, Xingzhe; Cheung, Gary Shun-Pan; Zhang, Chengfei; Masuda, Yoshiko Murakami; Kimura, Yuichi; Matsumoto, Koukichi

2010-04-01

The purpose of this study was to assess the efficacy of instrumentation of C-shaped canals with ProTaper rotary system and traditional instruments by using micro-computed tomography (micro-CT). Twenty-four mandibular molars with C-shaped canals were selected in pairs and sorted equally into 2 groups, which were assigned for instrumentation by ProTaper rotary system (ProTaper group) or by K-files and Gates-Glidden burs (Hand Instrument group). Three-dimensional images were constructed by micro-CT. The volume of dentin removed, uninstrumented canal area, time taken for instrumentation, and iatrogenic error of instrumentation were investigated. Hand Instrument group showed greater amount of volumetric dentin removal and left less uninstrumented canal area than ProTaper group (P < .01). The time needed for instrumentation was shorter for ProTaper group than for Hand Instrument group (P < .05). No instrument breakage occurred in both groups, but more conspicuous procedural errors were detected in Hand Instrument group than for ProTaper group. It was concluded that ProTaper rotary system maintained the canal curvature with speediness and few procedural errors, whereas traditional instrumentation can clean more canal surface. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Loaded Ce-Ag organic-inorganic hybrids and their antibacterial activity.

PubMed

Truffault, Laurianne; Rodrigues, Danilo Fernando; Salgado, Hérida Regida Nunes; Santilli, Celso Valentim; Pulcinelli, Sandra Helena

2016-11-01

There are requirements for surfaces with antibacterial properties in various technological fields. U-PEO hybrids with antibacterial properties were synthesized by the sol-gel process, incorporating combinations of cerium and silver salts at different silver molar fractions (0, 0.02, 0.05, 0.10, and 1) relative to the total amount of doped cations. The loaded hybrids were characterized by TGA, XRD, and Raman spectroscopy. Release tests were performed using UV-vis spectroscopy, and the antibacterial properties of the hybrids were studied in agar tests and turbidimetry assays. The nanostructural evolution of the hybrids during the release of the antibacterial agents was investigated by in situ SAXS. XRD results showed the presence of the AgCl crystalline phase in the loaded hybrids from a silver molar fraction of 0.05. Raman spectroscopy evidenced the interaction of silver cations with the polymeric part of the hybrid. SAXS results confirmed these interactions and showed that cerium species interacted with both organic and inorganic parts of the hybrids. The loaded U-PEO hybrids were found to release all the incorporated cerium in 1h, while the hybrid containing 100% of silver released only 78% of the incorporated silver. All the loaded hybrids displayed antibacterial activity against the Pseudomonas aeruginosa bacterium. The antibacterial activity was found to increase with silver molar fraction. Due to its high antibacterial activity and low silver molar fraction, the loaded hybrid with silver molar fraction of 0.10 seemed to be a good compromise between efficiency, esthetic transparency, and photostability. Copyright © 2016 Elsevier B.V. All rights reserved.

Removing polysaccharides-and saccharides-related coloring impurities in alkyl polyglycosides by bleaching with the H2O2/TAED/NaHCO3 system.

PubMed

Yanmei, Liu; Jinliang, Tao; Jiao, Sun; Wenyi, Chen

2014-11-04

The effect of H2O2/TAED/NaHCO3 system, namely NaHCO3 as alkaline agent with the (tetra acetyl ethylene diamine (TAED)) TAED-activated peroxide system, bleaching of alkyl polyglycosides solution was studied by spectrophotometry. The results showed that the optimal bleaching conditions about H2O2/TAED/NaHCO3 system bleaching of alkyl polyglycosides solution were as follows: molar ratio of TAED to H2O2 was 0.06, addition of H2O2 was 8.6%, addition of NaHCO3 was 3.2%, bleaching temperature of 50-65 °C, addition of MgO was 0.13%, and bleaching time was 8h. If too much amount of NaHCO3 was added to the system and maintained alkaline pH, the bleaching effect would be greatly reduced. Fixing molar ratio of TAED to H2O2 and increasing the amount of H2O2 were beneficial to improve the whiteness of alkyl polyglycosides, but adding too much amount of H2O2 would reduce the transparency. In the TAED-activated peroxide system, NaHCO3 as alkaline agent and buffer agent, could overcome the disadvantage of producing black precipitates when NaOH as alkaline agent. Copyright © 2014 Elsevier Ltd. All rights reserved.

A comparative study of surgical drain placement and the use of kinesiologic tape to reduce postoperative morbidity after third molar surgery.

PubMed

Genc, Aysenur; Cakarer, Sirmahan; Yalcin, Basak Keskin; Kilic, Beril Berivan; Isler, Sabri Cemil; Keskin, Cengizhan

2018-04-19

Our aim was to compare the effects of the surgical drain and kinesiotape applications on postoperative morbidity after mandibular third molar surgery in a split-mouth study design. A single-centre, split-mouth study was performed in 23 patients who needed surgical removal of bilateral mandibular third molars. Each patient was treated with a drain tube on one side of the mandible and Kinesio tape (KT) on the contralateral side. Swelling was significantly greater in the KT group than in the drain group throughout the study period. The groups did not differ significantly in the amount of trismus at any time point. The Visual Analogue Scale (VAS)-measured pain intensity was significantly lower in the drainage group. Patients with KT had greater postoperative discomfort than those with a drain tube. All patients were generally satisfied with their treatments. Although both treatments were useful, a surgical drain was significantly more effective at reducing swelling and pain intensity than Kinesio tape. The effects of both on trismus were similar.

Optimization of high molecular weight pullulan production by Aureobasidium pullulans in batch fermentations.

PubMed

Gibson, Larry H; Coughlin, Robert W

2002-01-01

Of five strains of Aureobasidium pullulans studied, NRRL Y-2311-1 yielded the highest titer (26.2 g/L) of pullulan and formed the lowest amount of melanin-like pigment. Sucrose was superior to glucose as the carbon and energy source on the basis of yield and titer of pullulan produced. Pullulan titer was higher (26.2 vs 5.1 g/L), biomass concentration was lower (6.9 vs 12.7 g/L), and DO was lower (0 vs 60% of saturation) when the fermenter was agitated by a marine propeller compared to Rushton impellers. Pullulan produced by strain NRRL Y-2311-1 ranged in weight-average molar mass (M(w)) from 486 KDa and number-average molar mass (M(n)) from 220 Da on day 1 of growth to 390 KDa and 690 Da on day 6; M(w) declined by about 35% from day 1 to day 3, the day of maximum pullulan titer. For the other strains, the ranges of molar mass on the day of maximum pullulan titer were 338-614 KDa (M(w)) and 100-6820 Da (M(n)).

[The effects of Ketac Molar Aplicap glass-ionomer material on growth of cariogenic bacteria contained in the dental plaque].

PubMed

Płuciennik-Stronias, Małgorzata; Sakowska, Danuta; Paul-Stalmaszczyk, Małgorzata; Bołtacz-Rzepkowska, Elzbieta

2012-01-01

In the aging population, the prevalence of root caries has been observed, which is a characteristic feature of the elderly people. The most important element used in caries prevention is fluoride, which is derived from the air, diet or fluoride-containing preparations and materials, e.g. glass-ionomer restorations. The aim of the study was to evaluate the effect of Ketac Molar Aplicap glass-ionomer on the growth of Lactobacillus sp. bacteria, one of the species most frequently found in the carietic focus of the tooth root. The study was carried out in 15 patients with good oral hygiene, in whom 35 fillings from Ketac Molar Aplicap conventional glass-ionomer material were performed. After 6 months, three-day dental plaque from these fillings and from the tooth enamel of the control group was examined. No statistically significant differences (p = 0.554) in the amounts of Lactobacillus sp. between the study and control group were revealed. Lack of inhibiting effect of glass-ionomer material on the growth of the dental plaque with Lactobacillus sp. after the time of observation is implied.

Infinitely Dilute Partial Molar Properties of Proteins from Computer Simulation

PubMed Central

2015-01-01

A detailed understanding of temperature and pressure effects on an infinitely dilute protein’s conformational equilibrium requires knowledge of the corresponding infinitely dilute partial molar properties. Established molecular dynamics methodologies generally have not provided a way to calculate these properties without either a loss of thermodynamic rigor, the introduction of nonunique parameters, or a loss of information about which solute conformations specifically contributed to the output values. Here we implement a simple method that is thermodynamically rigorous and possesses none of the above disadvantages, and we report on the method’s feasibility and computational demands. We calculate infinitely dilute partial molar properties for two proteins and attempt to distinguish the thermodynamic differences between a native and a denatured conformation of a designed miniprotein. We conclude that simple ensemble average properties can be calculated with very reasonable amounts of computational power. In contrast, properties corresponding to fluctuating quantities are computationally demanding to calculate precisely, although they can be obtained more easily by following the temperature and/or pressure dependence of the corresponding ensemble averages. PMID:25325571

Microbial lipid production by Rhodosporidium toruloides under sulfate-limited conditions.

PubMed

Wu, Siguo; Zhao, Xin; Shen, Hongwei; Wang, Qian; Zhao, Zongbao K

2011-01-01

Novel biochemical approaches remain to be developed to improve microbial lipid technology. This study demonstrated that sulfate limitation was effective to promote accumulating substantial amounts of intracellular lipid by the oleaginous yeast Rhodosporidium toruloides Y4. When it was cultivated using a medium with an initial carbon-to-sulfur (C/S) molar ratio of 46,750, cellular lipid content reached up to 58.3%. The time courses of cell growth, lipid accumulation and nutrient depletion were analyzed and discussed in terms of lipid biosynthesis. Moreover, lipid accumulation under sulfate-limited conditions was effective regardless of the presence of a high concentration of nitrogen sources. Thus, lipid contents almost held constant at near 57% in the media with an initial C/S molar ratio of 11,380 although the carbon-to-nitrogen molar ratio ranged from 28.3 to 5.7. Taken together, our results established the sulfate-limitation approach to control lipid biosynthesis, which should be valuable to explore nitrogen-rich raw materials as the feedstock for lipid production. Copyright © 2010 Elsevier Ltd. All rights reserved.

Helium accumulation and bubble formation in FeCoNiCr alloy under high fluence He+ implantation

NASA Astrophysics Data System (ADS)

Chen, Da; Tong, Y.; Li, H.; Wang, J.; Zhao, Y. L.; Hu, Alice; Kai, J. J.

2018-04-01

Face-centered cubic (FCC) high-entropy alloys (HEA), as emerging alloys with equal-molar or near equal-molar constituents, show a promising radiation damage resistance under heavy ion bombardment, making them potential for structural material application in next-generation nuclear reactors, but the accumulation of light helium ions, a product of nuclear fission reaction, has not been studied. The present work experimentally studied the helium accumulation and bubble formation at implantation temperatures of 523 K, 573 K and 673 K in a homogenized FCC FeCoNiCr HEA, a HEA showing excellent radiation damage resistance under heavy ion irradiation. The size and population density of helium bubbles in FeCoNiCr samples were quantitatively analyzed through transmission electron microscopy (TEM), and the helium content existing in bubbles were estimated from a high-pressure Equation of State (EOS). We found that the helium diffusion in such condition was dominated by the self-interstitial/He replacement mechanism, and the corresponding activation energy in FeCoNiCr is comparable with the vacancy migration energy in Ni and austenitic stainless steel but only 14.3%, 31.4% and 51.4% of the accumulated helium precipitated into helium bubbles at 523 K, 573 K and 673 K, respectively, smaller than the pure Ni case. Importantly, the small bubble size suggested that FeCoNiCr HEA has a high resistance of helium bubble formation compared with Ni and steels.

46 CFR Appendix A to Subpart A of... - Example of Escrow Agreement for Use Under 46 CFR 540.5(b)

Code of Federal Regulations, 2010 CFR

2010-10-01

... determined above, plus a cash amount equal to [amount equal to no less than 10% of the Operator's and/or.../or (f) Corporate bonds of the three highest categories, as rated by Standard and Poor's or Moody's... each passenger holding a ticket for future passage on the Operator's/Ticket Issuer's vessel(s) an...

Endodontic Management of the Three-Rooted Mandibular First Permanent Molar: a Case Report.

PubMed

Štamfelj, Iztok

2014-09-01

The distal root of the mandibular first permanent molar (MFPM) contains one or two canals. More rarely, the second/third distal canal is found in a separate root in a distolingual (DL) position - a radix entomolaris (RE). In Caucasians, this occurs in less than 4% of cases, but it is equally important to be aware of this possibility. Careful examination of the preoperative periapical radiographs (orthoradial and mesially angled) and inspection of the pulp chamber floor during endodontic management may indicate that this radicular variant is present. RE's lingual inclination and buccolingual curvature must be taken into account during cleaning and shaping of the canal within this root to avoid procedural errors, such as straightening and ledging of the root canal, perforation or instrument fracture. The aim of the present paper was to discuss a case report of a young patient, referred to an endodontic office after a ledge was created by inappropriate instrumentation of a buccolingually curved RE canal.

Electronic polarizability of light crude oil from optical and dielectric studies

NASA Astrophysics Data System (ADS)

George, A. K.; Singh, R. N.

2017-07-01

In the present paper we report the temperature dependence of density, refractive indices and dielectric constant of three samples of crude oils. The API gravity number estimated from the temperature dependent density studies revealed that the three samples fall in the category of light oil. The measured data of refractive index and the density are used to evaluate the polarizability of these fluids. Molar refractive index and the molar volume are evaluated through Lorentz-Lorenz equation. The function of the refractive index, FRI , divided by the mass density ρ, is a constant approximately equal to one-third and is invariant with temperature for all the samples. The measured values of the dielectric constant decrease linearly with increasing temperature for all the samples. The dielectric constant estimated from the refractive index measurements using Lorentz-Lorentz equation agrees well with the measured values. The results are promising since all the three measured properties complement each other and offer a simple and reliable method for estimating crude oil properties, in the absence of sufficient data.

Apical Extrusion of Debris after Canal Preparation with Hand-Files Used Manually or Installed on Reciprocating Air-Driven Handpiece in Straight and Curved Canals.

PubMed

Labbaf, Hossein; Shakeri, Leila; Orduie, Reza; Bastami, Farshid

2015-01-01

Apical debris extrusion (DE) subsequent to root canal instrumentation, is one of the most important causes of endodontic flare-ups. The aim of this study was to compare the amount of DE after root canal instrumentation using nickel-titanium (NiTi) hand files with step-back manual technique or installed on reciprocating handpiece. This study was conducted on mesiobuccal (MB) roots of extracted maxillary first molars (n=20) and roots of mandibular premolars (n=20) that were randomly divided into two groups (n=20) according to the armamentarium used for canal preparation (air-driven reciprocating handpiece or hand instrumentation). In each group, the MB and premolar roots were prepared with the main apical sizes of 35 and 40, respectively. The extruded debris were collected and weighed. Finally, the mean dry weights were compared using ANOVA and t-test, and Tukey's Multiple Comparisons Procedures were used to determine the significant differences in amounts of DE. The level of significance was set at 0.05. Regardless of the type of teeth, the mean values of DE, were significantly lower in the handpiece group (P<0.0001). In addition, significantly lower amounts of DE was observed in premolars in similar group (P<0.001). However, this difference was not significant in MB roots of molars (P=0.20). Root canal preparation with reciprocating handpiece can lead to significantly lower debris extrusion than the manual step-back technique. In handpiece-prepared canals, the amount of extruded debris was significantly lower in premolar teeth.

Inheritance of Occlusal Topography: A Twin Study

PubMed Central

Su, C-Y.; Corby, P.M.; Elliot, M.A.; Studen-Pavlovich, D.A.; Ranalli, D.N.; Rosa, B.; Wessel, J.; Schork, N.J.; Hart, T.C.; Bretz, W.A.

2011-01-01

Aim This was to determine the relative contribution of genetic factors on the morphology of occlusal surfaces of mandibular primary first molars by employing the twin study model. Methods The occlusal morphology of mandibular primary first molar teeth from dental casts of 9 monozygotic (MZ) twin pairs and 12 dizygotic (DZ) twin pairs 4 to 7 years old, were digitized by contact-type three-dimensional (3D) scanner. To compare the similarity of occlusal morphology between twin sets, each twin pair of occlusal surfaces was superimposed to establish the best fit by using computerized least squared techniques. Heritability was computed using a variance component model, adjusted for age and gender. Results DZ pairs demonstrated a greater degree of occlusal morphology variance. The total amount of difference in surface overlap was 0.0508 mm (0.0018 (inches) for the MZ (n=18) sample and 0.095 mm (0.0034 inches) for the DZ (n=24) sample and were not statistically significant (p=0.2203). The transformed mean differences were not statistically significantly different (p=0.2203). Heritability estimates of occlusal surface areas for right and left mandibular primary first molars were 97.5% and 98.2% (p<0.0001), respectively. Conclusions Occlusal morphology of DZ twin pairs was more variable than that of MZ twin pairs. Heritability estimates revealed that genetic factors strongly influence occlusal morphology of mandibular primary first molars. PMID:18328234

Anesthetic Efficacy of Supine and Upright Positions for the Inferior Alveolar Nerve Block: A Prospective, Randomized Study.

PubMed

Crowley, Chase; Drum, Melissa; Reader, Al; Nusstein, John; Fowler, Sara; Beck, Mike

2018-02-01

It has been recommended to place patients in an upright position after administration of an inferior alveolar nerve block (IANB), theoretically allowing the anesthetic to diffuse in an inferior direction and resulting in better pulpal anesthesia. The purpose of this study was to compare an upright versus a supine position on the success of pulpal anesthesia when an IANB was administered in asymptomatic teeth. One hundred ten asymptomatic subjects were randomly given IANBs by using 2% lidocaine with 1:100,000 epinephrine while they were in an upright position and supine position at 2 different appointments spaced at least 2 weeks apart. Pulpal anesthesia was measured in the molars, premolars, and incisors with an electric pulp tester in 4-minute cycles for 60 minutes. Anesthetic success was defined as the subject achieving 2 consecutive 80 readings within 15 minutes of the injection and sustaining the 80 reading for 60 minutes. Success was analyzed by using a mixed model logistic regression. Pulpal anesthesia for the supine position was not statistically more successful than the upright position in the second molars (73% vs 65%), first molars (59% vs 54%), lateral incisors (28% vs 23%), and central incisors (11% vs 8%), respectively. The supine position significantly improved success in the second premolars (63% vs 53%) and first premolars (75% vs 64%). The supine and upright positions were equally successful in the molars and anterior teeth. The supine position was more successful in the premolars. However, clinically, neither position for the IANB administration would provide complete pulpal anesthesia. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Immediate Versus Delayed Loading of Implant for Replacement of Missing Mandibular First Molar: A Randomized Prospective Six Years Clinical Study.

PubMed

Chidagam, Prudhvi Raj Lakshmi Venkata; Gande, Vijaya Chandra; Yadlapalli, Sravanthi; Venkata, Ramani Yarlagadda; Kondaka, Sudheer; Chedalawada, Sravya

2017-04-01

Emergence of dental implants made the replacement of missing tooth easy. During the early days of introduction, implants were loaded three to six months after implant insertion, but understanding of healing cascade and improved production technology has changed the phase of restoration from delayed to immediate loading. To evaluate and compare the clinical outcome of immediate and delayed loaded implant supported prosthesis for missing mandibular first molar. The objectives were bleeding on probing, probing depth, implant mobility, marginal bone level and peri-implant radiolucency were evaluated during follow up period. Twenty patients were included in this study who were in the need of fixed implant supported prosthesis for missing mandibular first molar. Single tooth implant with immediate loading done within two days of implant insertion in one group and another group were loaded after three months of implant insertion. These groups were evaluated clinically and radiographically over a period of 72 months after loading using Wilcoxon matched pairs test and Mann-Whitney U test. The study consists of 14 male and six female patients with the age range of 19 to 31 years. There was no bleeding on probing and probing depth remained well within the normal range even after 72 months of loading among both the groups. Minimal marginal bone loss observed with no mobility and peri-implant radiolucency. Implant supported prosthesis for missing mandibular first molar with immediate loading can be used as a successful treatment modality. It reduces treatment time, provides early function and prevents undue migration of adjacent tooth. Immediate loading showed similar clinical and radiographic results as that of delayed loading, indicating it as an equally efficient technique for implant supported prosthesis.

26 CFR 1.79-3 - Determination of amount equal to cost of group-term life insurance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Income § 1.79-3 Determination of amount equal to cost of group-term life insurance. (a) In general. This...'s age at his nearest birthday on June 30th of the calendar year. (iv) If the policy of group-term... group-term life insurance provided before July 1, 1999. For purposes of Table I, the age of the employee...

45 CFR 2526.50 - Is there a limit on the total amount of education awards an individual may receive?

Code of Federal Regulations, 2010 CFR

2010-10-01

... education awards. (b) Calculation of the value of an education award. For the purposes of this section, the value of an education award is equal to the actual amount of the education award received divided by the... value of awards received is equal to the sum of: (1) The value of each education award received as a...

Quality and loudness judgments for music subjected to compression limiting.

PubMed

Croghan, Naomi B H; Arehart, Kathryn H; Kates, James M

2012-08-01

Dynamic-range compression (DRC) is used in the music industry to maximize loudness. The amount of compression applied to commercial recordings has increased over time due to a motivating perspective that louder music is always preferred. In contrast to this viewpoint, artists and consumers have argued that using large amounts of DRC negatively affects the quality of music. However, little research evidence has supported the claims of either position. The present study investigated how DRC affects the perceived loudness and sound quality of recorded music. Rock and classical music samples were peak-normalized and then processed using different amounts of DRC. Normal-hearing listeners rated the processed and unprocessed samples on overall loudness, dynamic range, pleasantness, and preference, using a scaled paired-comparison procedure in two conditions: un-equalized, in which the loudness of the music samples varied, and loudness-equalized, in which loudness differences were minimized. Results indicated that a small amount of compression was preferred in the un-equalized condition, but the highest levels of compression were generally detrimental to quality, whether loudness was equalized or varied. These findings are contrary to the "louder is better" mentality in the music industry and suggest that more conservative use of DRC may be preferred for commercial music.

Synthesis and characterization of dextran-coated iron oxide nanoparticles

NASA Astrophysics Data System (ADS)

Predescu, Andra Mihaela; Matei, Ecaterina; Berbecaru, Andrei Constantin; Pantilimon, Cristian; Drăgan, Claudia; Vidu, Ruxandra; Predescu, Cristian; Kuncser, Victor

2018-03-01

Synthesis and characterization of iron oxide nanoparticles coated with a large molar weight dextran for environmental applications are reported. The first experiments involved the synthesis of iron oxide nanoparticles which were coated with dextran at different concentrations. The synthesis was performed by a co-precipitation technique, while the coating of iron oxide nanoparticles was carried out in solution. The obtained nanoparticles were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction spectrometry, Fourier transform infrared spectroscopy and superconducting quantum interference device magnetometry. The results demonstrated a successful coating of iron oxide nanoparticles with large molar weight dextran, of which agglomeration tendency depended on the amount of dextran in the coating solution. SEM and TEM observations have shown that the iron oxide nanoparticles are of about 7 nm in size.

Application of age assessment based on the radiographic visibility of the root pulp of lower third molars in a northern Chinese population.

PubMed

Guo, Yu-Cheng; Chu, Guang; Olze, Andreas; Schmidt, Sven; Schulz, Ronald; Ottow, Christian; Pfeiffer, Heidi; Chen, Teng; Schmeling, Andreas

2018-05-01

The purpose of the present study was to explore the potential application of radiographic visibility of the root pulp in lower third molars in a northern Chinese population, in order to determine if this methodology can be used to prove whether a person has surpassed the thresholds of 18 and 21 years of age. A total of 1300 orthopantomograms comprising equal numbers of females and males evenly distributed between the ages of 15 and 40 years were analyzed. The radiographic visibility of the root pulp of the lower third molars was assessed using the stages described by Olze et al. (2010). Stage 1 first appeared at 19.25 years in males and at 20.73 years in females. The earliest appearance of stage 2 happened at 22.33 years in males and at 22.41 years in females. Stage 3 was achieved first at 26.45 years in males and at 27.66 years in females. It was concluded that stages 1, 2, and 3 can be used to show that a person is over 18 years of age. If stages 2 or 3 are determined, it is possible to prove that an individual has already attained the age of 21 years.

[Comparison of minimally invasive extraction and traditional method in the extraction of impacted mandibular third molar].

PubMed

Xu, Fang; Zhang, Hui-Xia

2016-10-01

To compare minimally invasive extraction and traditional method in the extraction of impacted mandibular third molar. One hundred and sixty patients with impacted mandibular third molar were equally divided into two groups. Patients in the experimental group were treated with minimally invasive extraction, using implant machine and luxator, while patients in the control group were treated with traditional methods including use of orthodox chisel. The operation time, intraoperative and postoperative complications including deformation of extraction sockets, dry socket, limitation of mouth opening, pain and swelling, and fear were observed and compared between the two groups. The data were analyzed with SPSS18.0 software package. The operation time was (17.32±1.01) min in the experimental group, significantly shorter than the control group which was (33.46±1.12）min (P<0.05); significant difference was found in the incidence of root fracture, medium or severe tooth sockets deformation and incidence of psychological fear during operation between the control group and experimental group(P<0.05); the degree of mouth opening after surgery, the incidence of moderate or severe pain after surgery was significantly lower in the experimental than in the control group(P<0.05). Minimally invasive extraction of mandibular impacted wisdom tooth is better than traditional method, with shorter operation time and less intraoperative and postoperative complications, which should be widely applied in clinic.

Less is More: A Comparison of Antibody-Gold Nanoparticle Conjugates of Different Ratios.

PubMed

Byzova, Nadezhda A; Safenkova, Irina V; Slutskaya, Elvira S; Zherdev, Anatoly V; Dzantiev, Boris B

2017-11-15

This comprehensive study is related to gold nanoparticles (GNPs) conjugated with antibodies. The goal of the study is to determine the minimal concentration of antibodies for conjugate synthesis when the conjugates have high antigen-capturing activity. Two systems were studied: gold nanoparticles conjugated with monoclonal antibodies (mAb-GNP) specific to Helicobacter pylori and gold nanoparticles conjugated with polyclonal antibodies (pAb-GNP) specific to mouse immunoglobulins. Several conjugates were synthesized with different GNP-to-antibody molar ratios (from 1:1 to 1:245) through nondirectional and noncovalent immobilization on a surface of GNPs with a diameter of 25.3 ± 4.6 nm. The maximal antigen-capturing activities and equilibrium constants of the conjugates correlate with the formation of a constant hydrodynamic radius of the conjugates for mAb-GNP (GNP to antibody molar ratio 1:58) and with the stabilizing concentration by flocculation curves for pAb-GNP (GNP to antibody molar ratio 1:116). The application of the conjugates to the lateral flow immunoassay shows that the antibody concentrations used for the conjugation can be reduced (below the stabilizing concentration) without losing activity for the mAb-GNP conjugates. The findings highlight that the optimal concentration of antibodies immobilized on the surface of GNPs is not always equal to the stabilizing concentration determined by the flocculation curve.

Micro-computed tomography evaluation of the removal of calcium hydroxide medicament from C-shaped root canals of mandibular second molars.

PubMed

Ma, J Z; Shen, Y; Al-Ashaw, A J; Khaleel, H Y; Yang, Y; Wang, Z J; Peng, B; Haapasalo, M

2015-04-01

To use micro-computed tomography (μ-CT) to evaluate the amount of calcium hydroxide [Ca(OH)2 ] remaining in the C-shaped root canals of mandibular second molars after attempting to remove it with passive ultrasonic and sonic irrigation. Thirty mandibular second molars, 15 in C1 and 15 in C2 configurations as first identified by μ-CT, were divided into three groups (five C1 and five C2 in each group) for the three irrigation methods. All teeth were prepared to ProTaper Universal F2 and filled with Ca(OH)2 paste. The Ca(OH)2 was removed with F2 files and irrigation without agitation or with agitation using either EndoActivator or ultrasonics. μ-CT was used to measure the initial amount of Ca(OH)2 present. After removal of Ca(OH)2, μ-CT imaging was used to assess the percentage of volume of residual Ca(OH)2 in the canal. Data were analysed using one-way anova test. There was no significant difference in the mean volume of the root canal systems after instrumentation amongst the three groups. The three irrigation techniques left 2-17% of Ca(OH)2 in the root canals after removal. The mean volume of the remaining Ca(OH)2 was higher in the group without agitation than in the groups with sonic or ultrasonic agitation (P < 0.05). In the apical third, 68% of the canal space remained occupied by Ca(OH)2 when no agitation was used, whereas 28% and 31% remained filled by Ca(OH)2 in the EndoActivator and ultrasonic groups, respectively. There was no significant difference in the amount of residual Ca(OH)2 between the EndoActivator and ultrasonic groups. The proportion of remaining Ca(OH)2 in the apical canals was higher than in the middle and coronal canals in all groups (P < 0.05). A considerable proportion of the apical canal space remained filled with Ca(OH)2 in the C-shaped root canals after instrumentation and conventional needle irrigation. Although combining rotary instrumentation and irrigation with sonic or ultrasonic agitation reduced the amount of residual Ca(OH)2 in the C-shaped root canals, the large amount of calcium hydroxide in the critical apical area remains a concern. Alternative strategies should be considered in medication of the apical canal in C-shaped teeth. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

12 CFR 209.4 - Amounts and payments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... number of shares required to be canceled and shall pay therefor a sum equal to the cash subscription paid... subscription. The total subscription of a member bank (other than a mutual savings bank) shall equal six... Reserve Bank capital stock subscription to equal six percent of the member bank's capital and surplus...

Binding Assays for the Quantitative Detection of P. brevis Polyether Neurotoxins in Biological Samples and Antibodies as Therapeutic Aids for Polyether Marine Intoxication

DTIC Science & Technology

1990-05-15

was also linked to urease and toxin-enzyme conjugates were evaluated. 4. Toxin Enzyme Conjugates. Brevetoxins linked to either Jack Bean urease or...described in materials and methods. For urease conjugates, 1:2, 1:4 and 1:6 molar ratios were investigated. The following protocol yielded the most...fold excess urease in 1 volume equivalent of water, in three equal aliquots. Total volume after addition is 2-fold the volume in step [2], final

PROCESS FOR REMOVING ALUMINUM COATINGS

DOEpatents

Flox, J.

1959-07-01

A process is presented for removing aluminum jackets or cans from uranium slugs. This is accomplished by immersing the aluminum coated uranium slugs in an aqueous solution of 9 to 20% sodium hydroxide and 35 to 12% sodium nitrate to selectively dissolve the aluminum coating, the amount of solution being such as to obtain a molar ratio of sodium hydroxide to aluminum of at least

Vaginal inserts based on chitosan and carboxymethylcellulose complexes for local delivery of chlorhexidine: preparation, characterization and antimicrobial activity.

PubMed

Bigucci, Federica; Abruzzo, Angela; Vitali, Beatrice; Saladini, Bruno; Cerchiara, Teresa; Gallucci, Maria Caterina; Luppi, Barbara

2015-01-30

The aim of this work was to prepare vaginal inserts based on chitosan/carboxymethylcellulose polyelectrolyte complexes for local delivery of chlorhexidine digluconate. Complexes were prepared with different chitosan/carboxymethylcellulose molar ratios at a pH value close to pKa interval of the polymers and were characterized in terms of physico-chemical properties, complexation yield and drug loading. Then complexes were used to prepare inserts as vaginal dosage forms and their physical handling, morphology, water-uptake ability and drug release properties as well as antimicrobial activity toward Candida albicans and Escherichia coli were evaluated. Results confirmed the ionic interaction between chitosan and carboxymethylcellulose and the influence of the charge amount on the complexation yield. Complexes were characterized by high values of drug loading and showed increasing water-uptake ability with the increase of carboxymethylcellulose amount. The selection of appropriate chitosan/carboxymethylcellulose molar ratios allowed to obtain cone-like shaped solid inserts, easy to handle and able to hydrate releasing the drug over time. Finally, the formulated inserts showed antimicrobial activity against common pathogens responsible for vaginal infections. Copyright © 2014 Elsevier B.V. All rights reserved.

Three-dimensional quantitative analysis of adhesive remnants and enamel loss resulting from debonding orthodontic molar tubes

PubMed Central

2014-01-01

Aims Presenting a new method for direct, quantitative analysis of enamel surface. Measurement of adhesive remnants and enamel loss resulting from debonding molar tubes. Material and methods Buccal surfaces of fifteen extracted human molars were directly scanned with an optic blue-light 3D scanner to the nearest 2 μm. After 20 s etching molar tubes were bonded and after 24 h storing in 0.9% saline - debonded. Then 3D scanning was repeated. Superimposition and comparison were proceeded and shape alterations of the entire objects were analyzed using specialized computer software. Residual adhesive heights as well as enamel loss depths have been obtained for the entire buccal surfaces. Residual adhesive volume and enamel loss volume have been calculated for every tooth. Results The maximum height of adhesive remaining on enamel surface was 0.76 mm and the volume on particular teeth ranged from 0.047 mm3 to 4.16 mm3. The median adhesive remnant volume was 0.988 mm3. Mean depths of enamel loss for particular teeth ranged from 0.0076 mm to 0.0416 mm. Highest maximum depth of enamel loss was 0.207 mm. Median volume of enamel loss was 0.104 mm3 and maximum volume was 1.484 mm3. Conclusions Blue-light 3D scanning is able to provide direct precise scans of the enamel surface, which can be superimposed in order to calculate shape alterations. Debonding molar tubes leaves a certain amount of adhesive remnants on the enamel, however the interface fracture pattern varies for particular teeth and areas of enamel loss are present as well. PMID:25208969

Pre-emptive effect of dexamethasone injection and consumption on post-operative swelling, pain, and trismus after third molar surgery. A prospective, double blind and randomized study.

PubMed

Chaudhary, Pradeep D; Rastogi, Sanjay; Gupta, Prashant; Niranjanaprasad Indra, B; Thomas, Roy; Choudhury, Rupshikha

2015-01-01

To evaluate the preventative effect of intravenous 4 mg of dexamethasone and 8 mg oral dexamethasone on post-operative pain, swelling and trismus after the surgical extraction of mandibular third molars. A randomized clinical trial comprised of 200 patients (control group I intravenous and experimental group II orally) with impacted lower third molars, average age 20.8 years with no local or systemic problems, with bilateral impacted lower third molars, were operated under local anesthesia. Group I was given 4 mg IV and group II was given 8 mg orally of dexamethasone 1 h before procedure. The choice of which side to operate first and the amount of concentration of medication to use was made randomly and double-blindly. Post-operative pain was evaluated using a visual analog scale (VAS) and the degree of swelling was evaluated through facial reference points' variation. The presence of trismus was analyzed through measurement of the interincisal distance (IID). These assessments were obtained before the operation and 24 h, 48 h and 7th POD. No significant difference was found in facial swelling and trismus between IV 4 mg injection and oral 8 mg consumption after lower third molar surgery (student t test P > 0.05). The visual analogue scale scores for pain assessment showed no significant difference between IV injection and oral route of dexamethasone (student t test P > 0.05). Patients can be administered 8 mg oral dexamethasone is as effective as 4 mg intra venous route without much difference in final outcome at any given point of time.

Three-dimensional quantitative analysis of adhesive remnants and enamel loss resulting from debonding orthodontic molar tubes.

PubMed

Janiszewska-Olszowska, Joanna; Tandecka, Katarzyna; Szatkiewicz, Tomasz; Sporniak-Tutak, Katarzyna; Grocholewicz, Katarzyna

2014-09-10

Presenting a new method for direct, quantitative analysis of enamel surface. Measurement of adhesive remnants and enamel loss resulting from debonding molar tubes. Buccal surfaces of fifteen extracted human molars were directly scanned with an optic blue-light 3D scanner to the nearest 2 μm. After 20 s etching molar tubes were bonded and after 24 h storing in 0.9% saline - debonded. Then 3D scanning was repeated. Superimposition and comparison were proceeded and shape alterations of the entire objects were analyzed using specialized computer software. Residual adhesive heights as well as enamel loss depths have been obtained for the entire buccal surfaces. Residual adhesive volume and enamel loss volume have been calculated for every tooth. The maximum height of adhesive remaining on enamel surface was 0.76 mm and the volume on particular teeth ranged from 0.047 mm3 to 4.16 mm3. The median adhesive remnant volume was 0.988 mm3. Mean depths of enamel loss for particular teeth ranged from 0.0076 mm to 0.0416 mm. Highest maximum depth of enamel loss was 0.207 mm. Median volume of enamel loss was 0.104 mm3 and maximum volume was 1.484 mm3. Blue-light 3D scanning is able to provide direct precise scans of the enamel surface, which can be superimposed in order to calculate shape alterations. Debonding molar tubes leaves a certain amount of adhesive remnants on the enamel, however the interface fracture pattern varies for particular teeth and areas of enamel loss are present as well.

Evaluation of the cytotoxicity of selected conventional glass ionomer cements on human gingival fibroblasts.

PubMed

Marczuk-Kolada, Grażyna; Łuczaj-Cepowicz, Elżbieta; Pawińska, Małgorzata; Hołownia, Adam

2017-10-01

Dentistry materials are the most frequently used substitutes of human tissues. Therefore, an assessment of dental filling materials should cover not only their chemical, physical, and mechanical characteristics, but also their cytotoxicity. To compare the cytotoxic effects of 13 conventional glass ionomer cements on human gingival fibroblasts. The assessment was conducted using the MTT test. Six samples were prepared for each material. Culture plates with cells and inserts with the materials were incubated at 37°C, 5% CO2, and 95% humidity for 24 h. Then the inserts were removed, 1 mL of MTT was added in the amount of 0.5 mg/1 mL of the medium, and the samples were incubated in the described conditions without light for 2 h. The optical density was measured with an absorption spectrophotometer at a wavelength of 560 nm. The cytotoxic effects of the Argion Molar was significantly stronger than the Fuji Triage (p = 0.007), Chemfil Molar (p < 0.0001), and Ionofil Molar AC Quick (p < 0.001). The Fuji IX GP and Fuji IX Extra had a significantly stronger adverse effect than the Chemfil Molar (p = 0.014, p = 0.029, respectively) and Ionofil Molar AC Quick (p = 0.017, p = 0.034, respectively). The cements from the low cytotoxicity group were significantly more toxic vs materials whose presence resulted in fibroblast growth (p < 0.001). The research conducted indicates that, although the materials studied may belong to the same group, they are characterized by low, yet not uniform, cytotoxicity on human gingival fibroblasts. The toxic effects should not be assigned to a relevant group of materials, but each dentistry product should be evaluated individually.

Effects of chemical composition of fly ash on efficiency of metal separation in ash-melting of municipal solid waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okada, Takashi, E-mail: t-okada@u-fukui.ac.jp; Tomikawa, Hiroki

2013-03-15

Highlights: ► Separation of Pb and Zn from Fe and Cu in ash-melting of municipal solid waste. ► Molar ratio of Cl to Na and K in fly ash affected the metal-separation efficiency. ► The low molar ratio and a non-oxidative atmosphere were better for the separation. - Abstract: In the process of metal separation by ash-melting, Fe and Cu in the incineration residue remain in the melting furnace as molten metal, whereas Pb and Zn in the residue are volatilized. This study investigated the effects of the chemical composition of incineration fly ash on the metal-separation efficiency of themore » ash-melting process. Incineration fly ash with different chemical compositions was melted with bottom ash in a lab-scale reactor, and the efficiency with which Pb and Zn were volatilized preventing the volatilization of Fe and Cu was evaluated. In addition, the behavior of these metals was simulated by thermodynamic equilibrium calculations. Depending on the exhaust gas treatment system used in the incinerator, the relationships among Na, K, and Cl concentrations in the incineration fly ash differed, which affected the efficiency of the metal separation. The amounts of Fe and Cu volatilized decreased by the decrease in the molar ratio of Cl to Na and K in the ash, promoting metal separation. The thermodynamic simulation predicted that the chlorination volatilization of Fe and Cu was prevented by the decrease in the molar ratio, as mentioned before. By melting incineration fly ash with the low molar ratio in a non-oxidative atmosphere, most of the Pb and Zn in the ash were volatilized leaving behind Fe and Cu.« less

Method for the simultaneous preparation of radon-211, xenon-125, xenon-123, astatine-211, iodine-125 and iodine-123

DOEpatents

Mirzadeh, S.; Lambrecht, R.M.

1985-07-01

The invention relates to a practical method for commercially producing radiopharmaceutical activities and, more particularly, relates to a method for the preparation of about equal amount of Radon-211 (/sup 211/Rn) and Xenon-125 (/sup 125/Xe) including a one-step chemical procedure following an irradiation procedure in which a selected target of Thorium (/sup 232/Th) or Uranium (/sup 238/U) is irradiated. The disclosed method is also effective for the preparation in a one-step chemical procedure of substantially equal amounts of high purity /sup 123/I and /sup 211/At. In one preferred arrangement of the invention almost equal quantities of /sup 211/Rn and /sup 125/Xe are prepared using a onestep chemical procedure in which a suitably irradiated fertile target material, such as thorium-232 or uranium-238, is treated to extract those radionuclides from it. In the same one-step chemical procedure about equal quantities of /sup 211/At and /sup 123/I are prepared and stored for subsequent use. In a modified arrangement of the method of the invention, it is practiced to separate and store about equal amounts of only /sup 211/Rn and /sup 125/Xe, while preventing the extraction or storage of the radionuclides /sup 211/At and /sup 123/I.

An automated technique to stage lower third molar development on panoramic radiographs for age estimation: a pilot study.

PubMed

De Tobel, J; Radesh, P; Vandermeulen, D; Thevissen, P W

2017-12-01

Automated methods to evaluate growth of hand and wrist bones on radiographs and magnetic resonance imaging have been developed. They can be applied to estimate age in children and subadults. Automated methods require the software to (1) recognise the region of interest in the image(s), (2) evaluate the degree of development and (3) correlate this to the age of the subject based on a reference population. For age estimation based on third molars an automated method for step (1) has been presented for 3D magnetic resonance imaging and is currently being optimised (Unterpirker et al. 2015). To develop an automated method for step (2) based on lower third molars on panoramic radiographs. A modified Demirjian staging technique including ten developmental stages was developed. Twenty panoramic radiographs per stage per gender were retrospectively selected for FDI element 38. Two observers decided in consensus about the stages. When necessary, a third observer acted as a referee to establish the reference stage for the considered third molar. This set of radiographs was used as training data for machine learning algorithms for automated staging. First, image contrast settings were optimised to evaluate the third molar of interest and a rectangular bounding box was placed around it in a standardised way using Adobe Photoshop CC 2017 software. This bounding box indicated the region of interest for the next step. Second, several machine learning algorithms available in MATLAB R2017a software were applied for automated stage recognition. Third, the classification performance was evaluated in a 5-fold cross-validation scenario, using different validation metrics (accuracy, Rank-N recognition rate, mean absolute difference, linear kappa coefficient). Transfer Learning as a type of Deep Learning Convolutional Neural Network approach outperformed all other tested approaches. Mean accuracy equalled 0.51, mean absolute difference was 0.6 stages and mean linearly weighted kappa was 0.82. The overall performance of the presented automated pilot technique to stage lower third molar development on panoramic radiographs was similar to staging by human observers. It will be further optimised in future research, since it represents a necessary step to achieve a fully automated dental age estimation method, which to date is not available.

45 CFR 264.50 - What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 2 2014-10-01 2012-10-01 true What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal to the reduction to the adjusted SFAG resulting from a penalty? 264.50 Section 264.50 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATIO...

45 CFR 264.50 - What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal to the reduction to the adjusted SFAG resulting from a penalty? 264.50 Section 264.50 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS),...

45 CFR 264.50 - What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 2 2011-10-01 2011-10-01 false What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal to the reduction to the adjusted SFAG resulting from a penalty? 264.50 Section 264.50 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS),...

45 CFR 264.50 - What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 2 2013-10-01 2012-10-01 true What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal to the reduction to the adjusted SFAG resulting from a penalty? 264.50 Section 264.50 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATIO...

45 CFR 264.50 - What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 2 2012-10-01 2012-10-01 false What happens if, in a fiscal year, a State does not expend, with its own funds, an amount equal to the reduction to the adjusted SFAG resulting from a penalty? 264.50 Section 264.50 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS),...

7 CFR 1400.6 - Joint and several liability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... entity determined to have knowingly participated in a scheme or device, or other such equally serious... of the scheme or device, or other such equally serious actions, including amounts necessary to...

Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

DOE PAGES

Elliott, Amelia; AlSalihi, Sarah; Merriman, Abbey L.; ...

2016-01-01

The densification of parts that are produced by binder jetting Additive Manufacturing (AM; a.k.a. “3D Printing”) is an essential step in making them mechanically useful. By increasing the packing factor of the powder bed by incorporating nanoparticles into the binder has potential to alleviate the amount of shrinkage needed for full densification of binder jet parts. We present preliminary data on the use of 316L Stainless Steel Nanoparticles (SSN) to densify 316L stainless steel binder jet parts. Aqueous solutions of Diethylene Glycol (DEG) or Ethylene Glycol (EG) were prepared at different DEG/water and EG/water molar ratios; pH of the solutionsmore » was adjusted by the use of 0.10 M sodium hydroxide. Nanoparticles were suspended in a resulted solution at a volume percentage of SSN/solution at 0.5%. The suspension was then sonicated for thirty minutes. One milliliter of the suspension was added stepwise to a sintered, printed disk with the dimensions: (d = 10 mm, h = 3 mm) in the presence of a small magnet. The 3D part was then sintered again. Moreover, the increase in the mass of the 3D part was used as indication of the amount of nanoparticles that diffused in the 3D part. This mass percent increase was studied as a function of pH of the suspension and as function DEG/water molar ratio. Unlike EG, data show that change in pH affects the mass percent when the suspension was made with DEG. Finally, optical analysis of the discs’ cross sections revealed trends metallic densities similar to trends in the data for mass increase with changing pH and water molar ratio.« less

Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, Amelia; AlSalihi, Sarah; Merriman, Abbey L.

The densification of parts that are produced by binder jetting Additive Manufacturing (AM; a.k.a. “3D Printing”) is an essential step in making them mechanically useful. By increasing the packing factor of the powder bed by incorporating nanoparticles into the binder has potential to alleviate the amount of shrinkage needed for full densification of binder jet parts. We present preliminary data on the use of 316L Stainless Steel Nanoparticles (SSN) to densify 316L stainless steel binder jet parts. Aqueous solutions of Diethylene Glycol (DEG) or Ethylene Glycol (EG) were prepared at different DEG/water and EG/water molar ratios; pH of the solutionsmore » was adjusted by the use of 0.10 M sodium hydroxide. Nanoparticles were suspended in a resulted solution at a volume percentage of SSN/solution at 0.5%. The suspension was then sonicated for thirty minutes. One milliliter of the suspension was added stepwise to a sintered, printed disk with the dimensions: (d = 10 mm, h = 3 mm) in the presence of a small magnet. The 3D part was then sintered again. Moreover, the increase in the mass of the 3D part was used as indication of the amount of nanoparticles that diffused in the 3D part. This mass percent increase was studied as a function of pH of the suspension and as function DEG/water molar ratio. Unlike EG, data show that change in pH affects the mass percent when the suspension was made with DEG. Finally, optical analysis of the discs’ cross sections revealed trends metallic densities similar to trends in the data for mass increase with changing pH and water molar ratio.« less

Three-dimensional finite element analysis of the stress distribution pattern in a mandibular first molar tooth restored with five different restorative materials.

PubMed

D'souza, Kathleen Manuela; Aras, Meena Ajay

2017-01-01

Badly broken or structurally compromised posterior teeth are frequently associated with crown/root fracture. Numerous restorative materials have been used to fabricate indirect full-coverage restorations for such teeth. This study aims to evaluate and compare the effect of restorative materials on the stress distribution pattern in a mandibular first molar tooth, under varying loading conditions and to compare the stress distribution pattern in five commonly used indirect restorative materials. Five three-dimensional finite element models representing a mandibular first molar tooth restored with crowns of gold, porcelain fused to metal, composite (Artglass), alumina-based zirconia (In-Ceram Zirconia [ICZ]), and double-layered zirconia-based materials (zirconia core veneered with porcelain, Lava) were constructed, using a Finite Element Analysis Software (ANSYS version 10; ANSYS Inc., Canonsburg, PA, USA). Two loading conditions were applied, simulating maximum bite force of 600 N axially and normal masticatory bite force of 225 N axially and nonaxially. Both all-ceramic crowns allowed the least amount of stress distribution to the surrounding tooth structure. In maximum bite force-simulation test, alumina-based all-ceramic crown displayed the highest von Mises stresses (123.745 MPa). In the masticatory bite force-simulation test, both all-ceramic crowns (122.503-133.13 MPa) displayed the highest von Mises stresses. ICZ crown displayed the highest peak von Mises stress values under maximum and masticatory bite forces. ICZ and Lava crowns also allowed the least amount of stress distribution to the surrounding tooth structure, which is indicative of a favorable response of the underlying tooth structure to the overlying full-coverage indirect restorative material. These results suggest that ICZ and Lava crowns can be recommended for clinical use in cases of badly damaged teeth.

[Influence of the fluoride releasing dental materials on the bacterial flora of dental plaque].

PubMed

Płuciennik, Małgorzata; Sakowska, Danuta; Krzemiński, Zbigniew; Piatowska, Danuta

2008-01-01

The assessment of influence of silver-free, fluor releasing dental materials on dental plaque bacteria quantity. 17 patients were included into the study. 51 restorations were placed following manufacturers recommendations. Following materials were used: conventional glassionomer Ketac-Molar ESPE, resin modified glassionomer Fuji II LC GC and fluor containing composite Charisma Heraeus Kulzer Class V restorations were placed in following teeth of upper and lower jaw: canines, first bicuspids, second bicuspids. Sound enamel was a control. After 10 weeks the 72 hours old dental plaque was collected from surface of restorations and control using sterile probe. Total amount of 68 dental plaques were investigated. Each plaque was placed on scaled and sterile aluminum foil. The moist weight of dental plaque was scaled. Dental plaque was moved into 7 ml 0.85% NaCl solution reduced by cystein chlorine hydrogen and disintegrated by ultrasounds (power:100 Watt, wave amplitude: 5 micorm). The suspension of dental plaque was serially diluted from 10(-4) to 10(-5) in sterile 0,85% NaCl solution, and seeded with amount of 0.1 ml on appropriate base. In dental plaque trials the amount of cariogenic bacteria was calculated--Streptococcus mutans, Streptococcus, Lactobacillus, Veillonella and Neisseria, and also total amount of aerobic and anaerobic bacteria was measured. Microbiologic studies were performed in Institute of Microbiology, Medical University, Łódź. Statistical analysis of collected data was accomplished. In 72 hours old dental plaques collected from the surfaces of Ketac -Molar, Fuji II LC, Charisma after 10 weeks since being placed into the class V cavity, results show no statistically significant differences in the amount of Streptococcus mutans, Streptococcus spp., Lactobacillus spp., Veillonella spp., Neisseria spp, in total amount of aerobic and anaerobic bacteria and in the quantity proportion of Streptococcus mutans versus Streptococcus spp. in comparison with control trail. Results show no statistically significant differences in the amount of listed above bacteria and in the proportion of Streptococcus mutans versus Streptococcus spp. in 72 hours old dental plaques collected from surfaces of investigated restorative materials.

Apical Extrusion of Debris after Canal Preparation with Hand-Files Used Manually or Installed on Reciprocating Air-Driven Handpiece in Straight and Curved Canals

PubMed Central

Labbaf, Hossein; Shakeri, Leila; Orduie, Reza; Bastami, Farshid

2015-01-01

Introduction: Apical debris extrusion (DE) subsequent to root canal instrumentation, is one of the most important causes of endodontic flare-ups. The aim of this study was to compare the amount of DE after root canal instrumentation using nickel-titanium (NiTi) hand files with step-back manual technique or installed on reciprocating handpiece. Methods and Materials: This study was conducted on mesiobuccal (MB) roots of extracted maxillary first molars (n=20) and roots of mandibular premolars (n=20) that were randomly divided into two groups (n=20) according to the armamentarium used for canal preparation (air-driven reciprocating handpiece or hand instrumentation). In each group, the MB and premolar roots were prepared with the main apical sizes of 35 and 40, respectively. The extruded debris were collected and weighed. Finally, the mean dry weights were compared using ANOVA and t-test, and Tukey’s Multiple Comparisons Procedures were used to determine the significant differences in amounts of DE. The level of significance was set at 0.05. Results: Regardless of the type of teeth, the mean values of DE, were significantly lower in the handpiece group (P<0.0001). In addition, significantly lower amounts of DE was observed in premolars in similar group (P<0.001). However, this difference was not significant in MB roots of molars (P=0.20). Conclusion: Root canal preparation with reciprocating handpiece can lead to significantly lower debris extrusion than the manual step-back technique. In handpiece-prepared canals, the amount of extruded debris was significantly lower in premolar teeth. PMID:26213538

29 CFR 4219.14 - Amount of liability for 20-year-limitation amounts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... amount equal to the present value of all initial withdrawal liability payments for which the employer was not liable pursuant to section 4219(c)(1)(B) of ERISA. The present value of such payments shall be...

Infiltrative local anesthesia with articaine is equally as effective as inferior alveolar nerve block with lidocaine for the removal of erupted molars.

PubMed

Venkat Narayanan, J; Gurram, Prashanthi; Krishnan, Radhika; Muthusubramanian, Veerabahu; Sadesh Kannan, V

2017-09-01

The aim of this study is to assess the efficacy of 4% articaine with 1:100,000 adrenaline given as buccal and lingual infiltration in adult patients undergoing erupted mandibular first and second molar teeth extraction versus inferior alveolar nerve block technique using 2% lignocaine with 1:80,000 adrenaline. A total of 100 patients undergoing extraction of mandibular posterior teeth were divided into two equally matched groups for the study, out of which 50 patients were given 4% articaine with 1:100,000 adrenaline as buccal and lingual infiltration and 50 patients were given 2% lignocaine with 1:80,000 adrenaline using classic direct inferior alveolar nerve block with lingual and buccal nerve block. Efficacy of anesthesia was determined using a numeric analog scale (NAS) ranging from 0 indicating no pain to 10 indicating the worst pain imaginable. The NAS was taken by a different operator to avoid bias. The pain scores in both groups were analyzed using the Mann-Whitney U test, and a p value of 0.338 was obtained which is not statistically significant. Hence, no significant difference in the pain score was established between both groups. The adverse effects of both the local anesthetics if any were noted. From this study, we concluded that the use of 4% articaine with 1:100,000 adrenaline is as effective as inferior alveolar nerve block with lignocaine but without the risk of attendant adverse effects of inferior alveolar nerve block technique.

Composite resins in the 21st century.

PubMed

Willems, G; Lambrechts, P; Braem, M; Vanherle, G

1993-09-01

Human enamel and dentin should be used as the physiologic standards with which to compare composite resins, especially in the posterior region. The intrinsic surface roughness of composite resins must be equal to or lower than the surface roughness of human enamel on enamel-to-enamel occlusal contact areas (Ra = 0.64 microns). Roughness determines the biologic strength of composite resins. The nanoindentation hardness value of the filler particles (2.91 to 8.84 GPa) must not be higher than that of the hydroxyapatite crystals of human enamel (3.39 GPa). Composite resins intended for posterior use should have a Young's modulus at least equal to, and preferably higher than, that of dentin (18.500 MPa). The compressive strength of enamel (384 MPa) and dentin (297 MPa) and the fracture strength of a natural tooth (molar = 305 MPa; premolar = 248 MPa) offer excellent mechanical standards to select the optimal strength for posterior composite resins. The in vivo occlusal contact area wear rate of composite resins must be comparable to the attritional enamel wear rate (about 39 microns/y) in molars. Differential wear between enamel and composite resin on the same tooth is a new criterion for visualizing and quantifying the wear resistance of composite resins in a biologic way. Posterior resins must have a radiographic opacity that is slightly in excess of that of human enamel (198% Al). Based on these standard criteria, it can be concluded that in the 21st century the ultrafine compact-filled composite resins may be the materials of choice for restoring posterior cavities.

Method for the simultaneous preparation of Radon-211, Xenon-125, Xenon-123, Astatine-211, Iodine-125 and Iodine-123

DOEpatents

Mirzadeh, Saed; Lambrecht, Richard M.

1987-01-01

A method for simultaneously preparing Radon-211, Astatine-211, Xenon-125, Xenon-123, Iodine-125 and Iodine-123 in a process that includes irradiating a fertile metal material then using a one-step chemical procedure to collect a first mixture of about equal amounts of Radon-211 and Xenon-125, and a separate second mixture of about equal amounts of Iodine-123 and Astatine-211.

Effect of strontium addition and chitosan concentration variation on cytotoxicity of chitosan-alginate-carbonate apatite based bone scaffold

NASA Astrophysics Data System (ADS)

Perkasa, Rilis Eka; Umniati, B. Sri; Sunendar, Bambang

2017-09-01

Bone scaffold is one of the most important component in bone tissue engineering. Basically, bone scaffold is a biocompatible structure designed to replace broken bone tissue temporarily. Unlike conventional bone replacements, an advanced bone scaffold should be bioactive (e.g: supporting bone growth) and biodegradable as new bone tissue grow, while retain its mechanical properties similarity with bone. It is also possible to add more bioactive substrates to bone scaffold to further support its performance. One of the substrate is strontium, an element that could improve the ability of the bone to repair itself. However, it must be noted that excessive consumption of strontium could lead to toxicity and diseases, such as osteomalacia and hypocalcemia. This research aimed to investigate the effect of strontium addition to the cytotoxic property of chitosan-alginate-carbonate apatite bone scaffold. The amount of strontium added to the bone scaffold was 5% molar of the carbonate apatite content. As a control, bone scaffold without stronsium (0% molar) were also made. The effect of chitosan concentration variation on the cytotoxicity were also observed, where the concentration varies on 1% and 3% w/v of chitosan solution. The results showed an optimum result on bone scaffold sample with 5% molar of strontium and 3% chitosan, where 87.67% cells in the performed MTS-Assay cytotoxicity testing survived. This showed that the use of up to 5% molar addition of strontium and 3% chitosan could enhance the survivability of the cell.

Effect of molar ratio of oxidizer/3-hexylthiophene monomer in chemical oxidative polymerization of poly(3-hexylthiophene)

NASA Astrophysics Data System (ADS)

Hai, Thien An Phung; Sugimoto, Ryuichi

2017-10-01

Poly(3-hexylthiophene) (P3HT) was successfully prepared by oxidative polymerization of 3-hexylthiophene (3HT) using FeCl3 in various solvents, including hexane, nitrobenzene, and acetonitrile. The range of molar ratios between the oxidant and monomer used in the reactions was 1:1-1:10. A similar result was obtained when the polymerization was conducted in ethanol-free chloroform, which indicated that the Lewis acidity of anhydrous FeCl3 was significantly affected by even a small amount of ethanol. The yield of P3HT obtained in the above solvents was proportional to the monomer/FeCl3 molar ratio, and the yield in hexane was the highest among all solvents. Analysis of the methanol extract of P3HT using Surface-Assisted Laser Desorption/Ionization Time-Of-Light Mass Spectrometry (SALDI TOF MS) showed that the 3HT dimer was formed at the initial stage of polymerization. The structure of the oligomer was also analyzed using SALDI TOF MS and 1H NMR. These results provide detailed insights into the polymerization mechanism of 3HT with FeCl3 as oxidant.

Cavitation Inception in Separated Flows.

DTIC Science & Technology

1981-12-01

measured data. Keller (1972, 1973) determined the nuclei population by using a single particle light scattering device (the sample volume was... computations of the average pressure coefficient. The amount of air dissolved in the water varied from 10 to 11 ppm ( molar ) and was measured with a Van Slyke...fluctuating pressures were also measured. .-The conditions for cavitation inception and desinence were determined and several holograms were recorded

Removal of free fatty acid in Palm Fatty Acid Distillate using sulfonated carbon catalyst derived from biomass wastefor biodiesel production

NASA Astrophysics Data System (ADS)

Hidayat, Arif; Rochmadi; Wijaya, Karna; Budiman, Arief

2016-01-01

In this research, the esterification of PFAD using the sulfonatedcoconut shell biochar catalyst was studied. Carbon solid catalysts were prepared by a sulfonation of carbonized coconut shells. The performances of the catalysts were evaluated in terms of the reaction temperatures, the molar ratios of methanol to PFAD, the catalyst loading and the reaction times. The reusability of the solid acid carbon catalysts was also studied in this work. The results indicated that the FFA conversion was significantly increased with increasing catalyst loading and reaction times. It can be concluded that the optimal conditions were an PFAD to methanol molar ratio of 1:12, the amount of catalyst of 10%w, and reaction temperature of 60oC.At this optimum condition, the conversion to biodieselreached 88%.

Impact of Bisphosphonate on Orthodontic tooth movement and osteoclastic count: An Animal Study.

PubMed

Venkataramana, V; Chidambaram, S; Reddy, B Vishnuvardhan; Goud, E V Soma Shekara; Arafath, Mohammed; Krishnan6, Santhana

2014-04-01

Background : The aim of the current study is to examine the effect of systemically administered BP-Pamidronate, on Orthodontic Tooth Movement (OTM) along with osteoclastic quantification in New Zealand white rabbits. Materials & Methods : Twenty rabbits used in the study, were equally divided into 2 groups ; Group-1 as Control & Group-2 as Experimental. A sentalloy NITI closed coil spring (GAC International, USA) of 100 gram force, ligated between the lower first molar and the anterior most incisors of the rabbit has served as orthodontic force element. The BP- Pamidronate was administered at the dosage of 1.5 mg/kg body intra-peritonially, on the 1st, 7th and 14th day of the experiment. On the 21st day both group of animals were sacrificed, mandibles were dissected. The formed diastema between the 1st and 2nd molar was measured on the dissected mandibles using standard metric scale, which is considered as the OTM in the mesial direction. Next, the alveolar bone regions along with intact mesial surfaces were processed for histological investigation (osteoclastic count). Results : The student 't' test has been done to compare the mean values of molar tooth movement and osteoclastic count. Parameter :1 molar tooth movement has shown a significant difference between the control (3.750 ± 0.548 mm) and the experimental group (3.050 ± 0.556 mm) with calculated 'p' value (p-value <0.05) is significant at 0.0110 level. Parameter : 2 osteoclastic count has shown a significant difference between the control (13.335000 ± 0.735856 per square mm.) and the experimental group (11.426900 ± 1.49369 per square mm) calculated 'p' value (p-value <0.05) is significant at 0.003 level. Conclusion : The molar tooth movement and the osteoclastic count were significantly reduced in BP - Pamidronate administered animals than non-drug recipients. How to cite the article: Venkataramana V, Chidambaram S, Reddy BV, Goud EV, Arafath M, Krishnan S. Impact of Bisphosphonate on Orthodontic tooth movement and olsteoclastic count: An Animal Study. J Int Oral Health 2014;6(2):1-8.

Impact of Bisphosphonate on Orthodontic tooth movement and osteoclastic count: An Animal Study

PubMed Central

Venkataramana, V; Chidambaram, S; Reddy, B Vishnuvardhan; Goud, E V Soma Shekara; Arafath, Mohammed; Krishnan, Santhana

2014-01-01

Background : The aim of the current study is to examine the effect of systemically administered BP-Pamidronate, on Orthodontic Tooth Movement (OTM) along with osteoclastic quantification in New Zealand white rabbits. Materials & Methods : Twenty rabbits used in the study, were equally divided into 2 groups ; Group-1 as Control & Group-2 as Experimental. A sentalloy NITI closed coil spring (GAC International, USA) of 100 gram force, ligated between the lower first molar and the anterior most incisors of the rabbit has served as orthodontic force element. The BP- Pamidronate was administered at the dosage of 1.5 mg/kg body intra-peritonially, on the 1st, 7th and 14th day of the experiment. On the 21st day both group of animals were sacrificed, mandibles were dissected. The formed diastema between the 1st and 2nd molar was measured on the dissected mandibles using standard metric scale, which is considered as the OTM in the mesial direction. Next, the alveolar bone regions along with intact mesial surfaces were processed for histological investigation (osteoclastic count). Results : The student ‘t’ test has been done to compare the mean values of molar tooth movement and osteoclastic count. Parameter :1 molar tooth movement has shown a significant difference between the control (3.750 ± 0.548 mm) and the experimental group (3.050 ± 0.556 mm) with calculated ‘p’ value (p-value <0.05) is significant at 0.0110 level. Parameter : 2 osteoclastic count has shown a significant difference between the control (13.335000 ± 0.735856 per square mm.) and the experimental group (11.426900 ± 1.49369 per square mm) calculated ‘p’ value (p-value <0.05) is significant at 0.003 level. Conclusion : The molar tooth movement and the osteoclastic count were significantly reduced in BP – Pamidronate administered animals than non-drug recipients. How to cite the article: Venkataramana V, Chidambaram S, Reddy BV, Goud EV, Arafath M, Krishnan S. Impact of Bisphosphonate on Orthodontic tooth movement and olsteoclastic count: An Animal Study. J Int Oral Health 2014;6(2):1-8. PMID:24876695

26 CFR 1.507-3 - Special rules; transferee foundations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... tax benefit of the transferor organization in an amount determined as follows: Such amount shall be an amount equal to the amount of such aggregate tax benefit multiplied by a fraction the numerator of which... effectively control the transferor organization shall not succeed to an aggregate tax benefit in excess of the...

45 CFR 32.8 - Amounts withheld.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) of this section, or (ii) An amount equal to 25% of the debtor's disposable pay less the amount(s... first pay day after the employer receives the order. However, if the first pay day is within 10 days after receipt of the order, the employer may begin deductions on the second pay day. (k) An employer may...

Equality of Opportunity and Equality of Outcome

ERIC Educational Resources Information Center

Kodelja, Zdenko

2016-01-01

The report on the findings of extensive empirical research on equality of educational opportunities carried out in the United States on a very large sample of public schools by Coleman and his colleagues has had a major impact on education policy and has given rise to a large amount of research and various interpretations. However, as some…

Hydroxyethyl starch.

PubMed

Thompson, W L

1980-01-01

HES products should be designated by both their number average of molecular weight (that determines colloidal activity) and molar substitution ratios. In addition to the original HES-70/70 developed in 1960, a rapidly excreted HES-50/50 has been available since 1977. HES-70/70 and human albumin are equivalent in both healthy and hypoalbuminemia subjects in regard to maximal and total effects on plasma volume, intravascular colloidal activity and plasma concentration of ingested colloid. Albumin and HES-70/70 are extravasated at nearly equal rates. Albumin elimination is predominantly monoexponential. HES-70/70 however, is partly metabolized and partly excreted in urine at rates that decrease progressively as the amount remaining in the body decreases. HES-50/50 has maximal effects on plasma volume and colloidal activity similar to those of dextran-40, but it is eliminated twice as rapidly and unlike dextran-40, does not accumulate on repeated ingestion of large doses. HES ingestion increases apparent serum activity of alpha amylase by slowing enzyme elimination. Anaphylactoid reactions have been infrequent and mild, even on repetitive ingestion in recurrent "Phoresis" donors. The effect of HES on coagulation in urine but does not slow urine flow by hyperviscosity. Hydroxyethylation of waxy starches yields safe colloids with the advantage of permitting selective control of drug effects by altering independently molecular size and rate of enzymatic hydrolysis, tailoring drug kinetics to specific uses.

Consequences of on-line dialysis on polyelectrolyte molar masses determined by size-exclusion chromatography with light scattering detection.

PubMed

Radke, Wolfgang

2016-02-01

Size-exclusion chromatography with light scattering detection experiments conducted on poly(acrylic acid) neutralized to different degrees or using hydroxides with different counterions suggest that the same counterion and degree of neutralization is observed at the detector, irrespective of salt concentration, degree of neutralization and counterion at the time of injection. This strongly supports that during the chromatographic experiment the counterions of the polyelectrolyte are exchanged with those of the eluent, resulting in an effective dialysis of the polyelectrolyte solution during the size-exclusion chromatography experiment. Consequently, the refractive index increment determined by a refractive index detector equals the refractive index increment obtained after excessive dialysis against the pure eluent. Therefore, the species detected and characterized by light scattering coupled to size-exclusion chromatography are not identical to the species injected into the chromatographic system. Despite this structural change during the chromatographic experiments, the correct molar mass for the injected species is obtained by size-exclusion chromatography with light scattering detection. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis, characterization and antimicrobial studies of Schiff base complexes

NASA Astrophysics Data System (ADS)

Zafar, Hina; Ahmad, Anis; Khan, Asad U.; Khan, Tahir Ali

2015-10-01

The Schiff base complexes, MLCl2 [M = Fe(II), Co(II), Ni(II), Cu(II) and Zn(II)] have been synthesized by the template reaction of respective metal ions with 2-acetylpyrrole and 1,3-diaminopropane in 1:2:1 M ratio. The complexes have been characterized by elemental analyses, ESI - mass, NMR (1H and 13C), IR, XRD, electronic and EPR spectral studies, magnetic susceptibility and molar conductance measurements. These studies show that all the complexes have octahedral arrangement around the metal ions. The molar conductance measurements of all the complexes in DMSO indicate their non-electrolytic nature. The complexes were screened for their antibacterial activity in vitro against Gram-positive (Streptococcus pyogenes) and Gram-negative (Klebsiella pneumoniae) bacteria. Among the metal complexes studied the copper complex [CuLCl2], showed highest antibacterial activity nearly equal to standard drug ciprofloxacin. Other complexes also showed considerable antibacterial activity. The relative order of activity against S. Pyogenes is as Cu(II) > Zn(II) > Co(II) = Fe(II) > Ni(II) and with K. Pneumonia is as Cu(II) > Co(II) > Zn(II) > Fe(II) > Ni(II).

Wear of the Primary WaveOne single file when shaping vestibular root canals of first maxillary molar

PubMed Central

Borie, Eduardo; Betancourt, Pablo; Aracena, Angella; Guzmán, Mario

2017-01-01

Background It is very important for a clinician to know the increased wear of mechanized files when establishing endodontic therapy. The aim of this study was to check the wear of the Primary WaveOne file upon shaping two, four and six maxillary molar vestibular canals. Material and Methods The deterioration of 40 files, divided into four groups, was evaluated microscopically: group 1, control (unused); group 2, two canals; group 3, four canals; and group 4, six canals. After instrumentation, the files were embedded in resin and sectioned at their apical third into three equal parts. To analyze the wear of edges in the different sections, AutoCAD software was used and analysis of variance (ANOVA) was then performed to compare the mean rake angles. Results The files with two and four uses showed slight wear, whereas those with six applications showed significant wear (p<0.05). Conclusions Primary WaveOne files can be used in up to four root canals without their edges losing effectiveness. Key words:Files wear, reciprocating motion, shaping capacity, WaveOne. PMID:28298976

Wear of the Primary WaveOne single file when shaping vestibular root canals of first maxillary molar.

PubMed

Aracena, Daniel; Borie, Eduardo; Betancourt, Pablo; Aracena, Angella; Guzmán, Mario

2017-03-01

It is very important for a clinician to know the increased wear of mechanized files when establishing endodontic therapy. The aim of this study was to check the wear of the Primary WaveOne file upon shaping two, four and six maxillary molar vestibular canals. The deterioration of 40 files, divided into four groups, was evaluated microscopically: group 1, control (unused); group 2, two canals; group 3, four canals; and group 4, six canals. After instrumentation, the files were embedded in resin and sectioned at their apical third into three equal parts. To analyze the wear of edges in the different sections, AutoCAD software was used and analysis of variance (ANOVA) was then performed to compare the mean rake angles. The files with two and four uses showed slight wear, whereas those with six applications showed significant wear ( p <0.05). Primary WaveOne files can be used in up to four root canals without their edges losing effectiveness. Key words: Files wear, reciprocating motion, shaping capacity, WaveOne.

Estimation of the molar absorption coefficient of copper salicylate within the spectral range 300-350 nm

NASA Astrophysics Data System (ADS)

Lavrik, N. L.; Mulloev, N. U.

2017-12-01

Additional absorption was detected in absorption spectra within the range 300-350 nm after addition of copper sulfate CuSO4(aq) to a solution of sodium salicylate NaНSal (рН = 7.8). The additional maximum absorption was observed at 320 nm. Assuming that the additional absorption depends on the formation of copper salicylate CuSal, the molar absorption coefficient εCuSal of this complex was determined to be (3.8 ± 0.02) · 103 М- 1 сm- 1. This value is almost equal to that of monoanion HSal-, εHSal - = (3.6 ± 0.04) · 103 М- 1 сm- 1, and is 2.5 times as much as εFe3 + HSal - = (1.55 ± 0.05) · 103 М- 1 сm- 1 for iron salicylate. The difference in εCuSal and εFe3 + HSal - is due to the difference in the initial electron states of Cu2 + and Fe3 + ions that have the d9 and d5 configurations, respectively.

27 CFR 70.243 - Exempt amount.

Code of Federal Regulations, 2010 CFR

2010-04-01

... as wages, salary, or other income for each payroll period described in § 70.244 of this part are exempt from levy as follows: (a) If the payroll period is weekly, an amount equal to: (1) The sum of: (i...) If the payroll period is not weekly, the amount exempt from levy shall be an amount which as nearly...

26 CFR 31.3102-3 - Collection of, and liability for, employee tax on tips.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., an amount equal to wages as defined in section 3121(a) except that tips and noncash remuneration... section 3401(a) (exclusive of tips); and (iii) The amount of taxes imposed on the remuneration of an... amounts deducted from an employee's remuneration in excess of the correct amount of employee tax, see § 31...

The Response of Bareroot Loblolly Pine Seedlings to the Amount and Timing of Nitrogen Fertilization in the Nursery

Treesearch

Hans Williams; Karen Woodard; Tim Stewart

2004-01-01

A nursery study was conducted to observe the effects of altering the amount of nitrogen fertilizer at each application on bareroot loblolly pine (Pinus taeda L.) seedling morphology, survival and growth. The treatments were an equal amount of fertilizer applied each time, an increasing amount each time, and a schedule characterized by low amounts,...

Effects of Expanding and Equal Spacing on Second Language Vocabulary Learning: Does Gradually Increasing Spacing Increase Vocabulary Learning?

ERIC Educational Resources Information Center

Nakata, Tatsuya

2015-01-01

Although expanding spacing is often regarded as the most effective practice schedule, studies comparing equal and expanding spacing have yielded mixed results. The present study set out to examine whether the amount of spacing and the retention interval may influence the effects of expanding and equal spacing on second language (L2) vocabulary…

Selective phenol methylation to 2,6-dimethylphenol in a fluidized bed of iron-chromium mixed oxide catalyst with o-cresol circulation.

PubMed

Zukowski, Witold; Berkowicz, Gabriela; Baron, Jerzy; Kandefer, Stanisław; Jamanek, Dariusz; Szarlik, Stefan; Wielgosz, Zbigniew; Zielecka, Maria

2014-01-01

2,6-dimethylphenol (2,6-DMP) is a product of phenol methylation, especially important for the plastics industry. The process of phenol methylation in the gas phase is strongly exothermic. In order to ensure good temperature equalization in the catalyst bed, the process was carried out using a catalyst in the form of a fluidized bed - in particular, the commercial iron-chromium catalyst TZC-3/1. Synthesis of 2,6-dimethylphenol from phenol and methanol in fluidized bed of iron-chromium catalyst was carried out and the fluidization of the catalyst was examined. Stable state of fluidized bed of iron-chromium catalyst was achieved. The measured velocities allowed to determine the minimum flow of reactants, ensuring introduction of the catalyst bed in the reactor into the state of fluidization. Due to a high content of o-cresol in products of 2,6-dimethylphenol synthesis, circulation in the technological node was proposed. A series of syntheses with variable amount of o-cresol in the feedstock allowed to determine the parameters of stationary states. A stable work of technological node with o-cresol circulation is possible in the temperature range of350-380°C, and o-cresolin/phenolin molar ratio of more than 0.48. Synthesis of 2,6-DMP over the iron-chromium catalyst is characterized by more than 90% degree of phenol conversion. Moreover, the O-alkylation did not occur (which was confirmed by GC-MS analysis). By applying o-cresol circulation in the 2,6-DMP process, selectivity of more than 85% degree of 2,6-DMP was achieved. The participation levels of by-products: 2,4-DMP and 2,4,6-TMP were low. In the optimal conditions based on the highest yield of 2,6-DMP achieved in the technological node applying o-cresol circulation, there are 2%mol. of 2,4-DMP and 6%mol. of 2,4,6-TMP in the final mixture, whereas 2,4,6-TMP can be useful as a chain stopper and polymer's molar mass regulator during the polymerization of 2,6-DMP.

Process for the recovery of strontium from acid solutions

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1992-01-01

The invention is a process for selectively extracting strontium and technetium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant is a macrocyclic polyether in a diluent which is insoluble in water, but which will itself dissolve a small amount of water. The process will extract strontium and technetium values from nitric acid solutions which are up to 6 molar in nitric acid.

Intraoral distalizer effects with conventional and skeletal anchorage: a meta-analysis.

PubMed

Grec, Roberto Henrique da Costa; Janson, Guilherme; Branco, Nuria Castello; Moura-Grec, Patrícia Garcia; Patel, Mayara Paim; Castanha Henriques, José Fernando

2013-05-01

The aims of this meta-analysis were to quantify and to compare the amounts of distalization and anchorage loss of conventional and skeletal anchorage methods in the correction of Class II malocclusion with intraoral distalizers. The literature was searched through 5 electronic databases, and inclusion criteria were applied. Articles that presented pretreatment and posttreatment cephalometric values were preferred. Quality assessments of the studies were performed. The averages and standard deviations of molar and premolar effects were extracted from the studies to perform a meta-analysis. After applying the inclusion and exclusion criteria, 40 studies were included in the systematic review. After the quality analysis, 2 articles were classified as high quality, 27 as medium quality, and 11 as low quality. For the meta-analysis, 6 studies were included, and they showed average molar distalization amounts of 3.34 mm with conventional anchorage and 5.10 mm with skeletal anchorage. The meta-analysis of premolar movement showed estimates of combined effects of 2.30 mm (mesialization) in studies with conventional anchorage and -4.01 mm (distalization) in studies with skeletal anchorage. There was scientific evidence that both anchorage systems are effective for distalization; however, with skeletal anchorage, there was no anchorage loss when direct anchorage was used. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Optimization of lipase-catalyzed enantioselective production of 1-phenyl 1-propanol using response surface methodology.

PubMed

Soyer, Asli; Bayraktar, Emine; Mehmetoglu, Ulku

2010-01-01

Optically active 1-phenyl 1-propanol is used as a chiral building block and synthetic intermediate in the pharmaceutical industries. In this study, the enantioselective production of 1-phenyl 1-propanol was investigated systematically using response surface methodology (RSM). Before RSM was applied, the effects of the enzyme source, the type of acyl donor, and the type of solvent on the kinetic resolution of 1-phenyl 1-propanol were studied. The best results were obtained with Candida antartica lipase (commercially available as Novozym 435), vinyl laurate as the acyl donor, and isooctane as the solvent. In the RSM, substrate concentration, molar ratio of acyl donor to the substrate, amount of enzyme, temperature, and stirring rate were chosen as independent variables. The predicted optimum conditions for a higher enantiomeric excess (ee) were as follows: substrate concentration, 233 mM; molar ratio of acyl donor to substrate, 1.5; enzyme amount, 116 mg; temperature, 47 °C; and stirring rate, 161 rpm. A verification experiment conducted at these optimized conditions for maximum ee yielded 91% for 3 hr, which is higher than the predicted value of 83%. The effect of microwave on the ee was also investigated and ee reached 87% at only 5 min.

[In-vitro evaluation of cinnarizine as a competing agent to beta-cyclodextrin inclusion complexes: effect of cinnarizine on the membrane permeation rate of progesterone from its beta-cyclodextrin inclusion complex].

PubMed

Muraoka, Atsushi; Tokumura, Tadakazu; Machida, Yoshiharu

2008-01-01

The use of competing agents is considered a powerful tool for the development of a drug-delivery system with drug/cyclodextrin inclusion complexes. However, there are very few studies examining this issue. To explain this phenomenon, it was thought that a competing agent with a sufficiently high stability constant had not yet been reported. In this study, cinnarizine (CN), which has a high stability constant with beta-cyclodextrin (beta-CD) and unique solubility characteristics, was selected, and its ability as a competing agent was examined in a membrane permeability study. The permeability study showed that the permeation rates of the drugs flurbiprofen, progesterone, and spironolactone decreased with their stability constants with the addition of beta-CD. In one of the drugs, progesterone (Pro), the decrease was restored by the addition of CN. The amount of CN added was a 1:1 molar ratio to the amount of Pro. However, no similar action was induced with the addition of DL-phenylalanine (Phe) in the permeation study at the 1:5 (Pro:Phe) molar ratio. These finding indicate that CN acts as a competing agent, and its action is much stronger than that of Phe.

Catalytic Synthesis of n-Butyl Oleate by Cerium Complex Doped Y/SBA-15 Composite Molecular Sieve

NASA Astrophysics Data System (ADS)

Shi, Chunwei; Bian, Xue; Wu, Yongfu; Cong, Yufeng; Pei, Mingyuan

2018-01-01

Cerium ion was successfully incorporated into Y/SBA-15 micro-mesoporous molecular sieves via the hydrothermal synthesis method to give a series of composite materials. The prepared materials were thoroughly characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray fluorescence spectroscopy (XRF), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and differential thermo gravimetric analysis (TG-DTG). The results showed that the prepared composite materials retained the highly ordered mesoporous two-dimensional hexagonal structure of SBA-15 and the octagonal structure of Y. The catalyst Ce-Y/SBA-15 was prepared and characterized, then the esterification of n-butanol and oleic acid was studied with bismuth phosphotungstate as a catalyst. Using this model reaction, the effects of Ce-HY/SBA-15, molar ratio of alcohol to oleic acid, amount of catalysts, reaction time and reaction temperature were investigated. The experimental results show that the optimal reaction conditions were: 1.8:1 molar ratio of alcohol to acid, 5 % catalyst amount (based on weight of oleic acid), 4 h reaction time and reflux conditions. Under these conditions, the yield of esterification was 90.6 %. The results suggest that the addition of Ce can effectively improve the catalytic properties of composite molecular sieves.

Autonomous parvovirus LuIII encapsidates equal amounts of plus and minus DNA strands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bates, R.C.; Snyder, C.E.; Banerjee, P.T.

1984-02-01

Autonomous parvoviruses are thought to uniquely encapsidate single-stranded DNA of minus polarity. In contrast, the defective adeno-associated viruses separately encapsidate equal amounts of plus and minus DNA strands. The uniqueness of minus strand encapsidation is reexamined for the autonomous parvoviruses. Although it was found that Kilham rat virus and H-1 virus encapsidate varying but small amounts of complementary-strand DNA, it was unexpected to find that LuIII virus encapsidated equal amounts of plus and minus DNA. The extracted LuIII DNA possessed properties of double-stranded replicative-form DNA, including insensitivity to S1 endonuclease, cleavage by restriction enzymes, and conversion to unit-length, single-stranded DNAmore » when electrophoresed under denaturing conditions. However, the inability of this DNA to form single-stranded DNA circles when denatured and then renatured in the presence of formamide and the lack of double-stranded DNA circle formation after treatment with exonuclease III and reannealing shows a lack of sequence homology of the 3' and 5' termini of LuIII DNA, in contrast to adeno-associated virus DNA. Digestion of LuIII double-stranded DNA with EcoRI and HincII and separation of plus and minus DNA strands on composite agarose-acrylamide gels identified a heterogeneity present only in the plus DNA strand. These results suggest that strand specificity of viral DNA encapsidation is not a useful property for differentiation between the autonomous and defective parvoviruses. Furthermore, encapsidation by LuIII of equal amounts of complementary DNA strands in contrast to encapsidation of minus strands by H-1 virus, when propagated in the same host cell type, suggests that selection of strands for encapsidation is a virus-coded rather than host-controlled event.« less

[Effects of T helper 1 cells and T helper 17 cells secreting cytokines on rat models of experimental periodontitis].

PubMed

Wang, Z X; Yang, L; Tan, J Y; Chen, L L

2017-12-09

Objectvie: To investigate the effects of secreting cytokines interferon-gamma (IFN-γ) and interleukin-17 (IL-17) of T helper 1 cells (Th1) and T helper 17 cells (Th17) on the peripheral blood and alveolar bone destruction, so as to provide a new explanation for cellular immunity-mediated alveolar bone destruction. Methods: Eighteen eight-week-old male Sprague-Dawley rats were divided, randomly and equally, into 3 groups: lipopolysaccharide (LPS) group, ligation group and normal control group. In the LPS group, Escherichia coli LPS was injected into the alveolar mucosa on the buccalmedian site of the left upper first molar, while the right upper first molar was injected with equal volume of physiological saline as self-controls. The injections were performed every other day for four times totally. In the ligation group, the left upper first molars were ligatured with 0.2 mm orthodontic cords, while the right upper first molars were left untreated as self-controls, and supplemented with high-sugar diet to promote the periodontitis status. The rats in normal control group were fed normally. The concentrations of IFN-γ and IL-17 in peripheral blood were measured using enzyme linked immunosorbent assay (ELISA) method at the fourth week after the start of injection and at the eighth week after ligation. The histological of periodontal tissues were observed after hematoxylin-eosin (HE) staining and osteoclast count was performed under light microscope. The histological of osteoclasts were observed after tartrate-resistant acid phosphatase (TRAP) staining. Expression of IFN-γ and IL-17 were detected by immunohistochemical assay. Results: The concentrations of IFN-γ in peripheral blood of LPS group [(185.0±50.7) ng/L] and ligation group [(202.9±60.4) ng/L] were significantly higher than that of normal control group [(106.3±17.2) ng/L]( P< 0.05). Meanwhile, histological examination showed inflammatory cells infiltration in the gingival epithelium, the height reduction of alveolar bone accompanied with absorption lacuna. There were significantly higher HE and TRAP stained osteoclasts in LPS group (9.50±1.05) and ligation group (10.83±1.17) than that in controlgroup (0.33±0.52)( P< 0.05). Moreover, the expressions of IL-17 in alveolar bone absorption area of LPS group and ligation group were significantly stronger than that in control group ( P< 0.05). Conclusions: The rat models of experimental periodontitis and alveolar bone resorption could be successfully established by means of ligationand LPS injection, respectively. The periodontal inflammatory responses were related to secreting cytokines IFN-γ and IL-17 of Th1 and Th17 cells, while Th17 cells might exert a positive effect on alveolar bone destruction.

Single oral dose pharmacokinetics of decursin, decursinol angelate, and decursinol in rats.

PubMed

Li, Li; Zhang, Jinhui; Xing, Chengguo; Kim, Sung-Hoon; Lü, Junxuan

2013-03-01

Decursin and decursinol angelate are the major components in the alcoholic extract of the root of Angelica gigas Nakai. Our previous work convincingly demonstrated that both decursin and decursinol angelate were rapidly converted to decursinol in mice after administration by either oral gavage or i. p. injection. In the current study, we compared for the first time the plasma profiles of decursinol, when equal moles of decursin/decursinol angelate or decursinol were given to rats by oral gavage, and investigated the effect of different formulas and other chemicals in Angelica gigas extract on the bioavailability of decursinol. Our results show that gavage of decursinol led to a faster attainment of plasma decursinol peak (Tmax ~ 0.7 h) and much higher peak levels than an equal molar amount administered as decursin/decursinol angelate mixture or as Angelica gigas ethanol extract, resulting in 2-3 fold higher bioavailability as estimated by the area under the curve of the respective regimens (65 012 vs. 27 033 h · ng/mL for decursinol and decursin/decursinol angelate treatment groups, respectively). Compared to a formula based on ethanol-PEG400-Tween80, carboxyl methyl cellulose was a less optimized vehicle. In addition, we detected peak levels of decursin and decursinol angelate in the plasma of rats administered with decursin/decursinol angelate or Angelica gigas extract in the nM range (Tmax ~ 0.5 h) with a newly established sensitive UHPLC-MS/MS method. Furthermore, our data support the liver, instead of intestine, as a major organ site where decursin and decursinol angelate were hydrolyzed to decursinol with a S9 microsomal in vitro metabolism assay. Taken together, our study provided important PK, LC-MS/MS methodology, formulation and metabolism insights in a rodent model for the rational design of in vivo efficacy studies of the corresponding chemicals in the future. Georg Thieme Verlag KG Stuttgart · New York.

Enhancement of activated sludge disintegration and dewaterability by Fenton process

NASA Astrophysics Data System (ADS)

Heng, G. C.; Isa, M. H.

2016-06-01

Municipal and industrial wastewater treatment plants produce large amounts of sludge. This excess sludge is an inevitable drawback inherent to the activated sludge process. In this study, the waste activated sludge was obtained from the campus wastewater treatment plant at Universiti Teknologi PETRONAS (UTP), Malaysia. Fenton pretreatment was optimized by using the response surface methodology (RSM) to study the effects of three operating conditions including the dosage of H2O2 (g H2O2/kg TS), the molar ratio of H2O2/Fe2+ and reaction time. The optimum operating variables to achieve MLVSS removal 65%, CST reduction 28%, sCOD 11000 mg/L and EPS 500 mg/L were: 1000 g H2O2/kg TS, H2O2/Fe2+ molar ratio 70 and reaction time 45 min. Fenton process was proved to be able to enhance the sludge disintegration and dewaterability.

Effects of four instruments on coronal pre-enlargement by using cone beam computed tomography.

PubMed

Sanfelice, Cintia Mussoline; da Costa, Fernanda Botega; Reis Só, Marcus Vinícius; Vier-Pelisser, Fabiana; Souza Bier, Carlos Alexandre; Grecca, Fabiana Soares

2010-05-01

This ex vivo study used cone beam computed tomography to evaluate the amount of dentin removal from the distal wall of the mesial canal of human mandibular first molars caused by 4 instruments used to flare the cervical third. Thirty-two mesial roots were divided into 4 groups prepared by using ProTaper, K3, Gates-Glidden, or LA Axxess. The dentin thickness of the distal cervical wall of mesial canals was measured before and after the preparation by using computed tomography and Adobe Photoshop software. There was no statistically significant difference between the study groups (P > 05). All the instruments used for cervical preparation seemed to be safe and did not damage the dentin structure of the distal wall of mesial root canals of mandibular molars. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Synthesis of linear polyethylenimine derivatives for DNA transfection.

PubMed

Brissault, Blandine; Kichler, Antoine; Guis, Christine; Leborgne, Christian; Danos, Olivier; Cheradame, Hervé

2003-01-01

A series of linear polymers containing varying amounts of ethylenimine or N-propylethylenimine units were synthesized by hydrolysis and/or reduction of polyethyloxazolines. The pK(a)s of the polyamines were determined potentiometrically. Gel mobility shift assay showed that the efficiency of DNA complexation was related to the fraction of amino groups that are protonated at neutral pH. The effects of cationic charge density and molar weight of the polymers on the transfection efficiency were evaluated on HepG2 cells. The results obtained with different copolymers show that the transfection efficiency primarily depends on the fraction of ethylenimine units included in the polymer albeit the molar weight is also of importance. On the basis of the results obtained with poly(N-propylethylenimines), we also demonstrate that the high transfection efficiency of polyethylenimines does not solely rely on their capacity to capture protons which are transferred into the endo-lysosomes during acidification.

High intensity discharge device containing oxytrihalides

DOEpatents

Lapatovich, Walter P.; Keeffe, William M.; Liebermann, Richard W.; Maya, Jakob

1987-01-01

A fill composition for a high intensity discharge device including mercury, niobium oxytrihalide, and a molecular stabilization agent is provided. The molar ratio of niobium oxytrihalide to the molecular stabilization agent in the fill is in the range of from about 5:1 to about 7.5:1. Niobium oxytrihalide is present in the fill in sufficient amount to produce, by dissociation in the discharge, atomic niobium, niobium oxide, NbO, and niobium dioxide, NbO.sub.2, with the molar ratio of niobium-containing vapor species to mercury in the fill being in the range of from about 0.01:1 to about 0.50:1; and mercury pressure of about 1 to about 50 atmospheres at lamp operating temperature. There is also provided a high intensity discharge device comprising a sealed light-transmissive arc tube; the arc tube including the above-described fill; and an energizing means for producing an electric discharge within the arc tube.

High intensity discharge device containing oxytrihalides

DOEpatents

Lapatovich, W.P.; Keeffe, W.M.; Liebermann, R.W.; Maya, J.

1987-06-09

A fill composition for a high intensity discharge device including mercury, niobium oxytrihalide, and a molecular stabilization agent is provided. The molar ratio of niobium oxytrihalide to the molecular stabilization agent in the fill is in the range of from about 5:1 to about 7.5:1. Niobium oxytrihalide is present in the fill in sufficient amount to produce, by dissociation in the discharge, atomic niobium, niobium oxide, NbO, and niobium dioxide, NbO[sub 2], with the molar ratio of niobium-containing vapor species to mercury in the fill being in the range of from about 0.01:1 to about 0.50:1; and mercury pressure of about 1 to about 50 atmospheres at lamp operating temperature. There is also provided a high intensity discharge device comprising a sealed light-transmissive arc tube; the arc tube including the above-described fill; and an energizing means for producing an electric discharge within the arc tube. 7 figs.

20 CFR 404.342 - Mother's and father's benefit amounts.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Mother's and father's benefit amounts. 404... Disability Benefits for Spouses and Divorced Spouses § 404.342 Mother's and father's benefit amounts. Your mother's or father's monthly benefit is equal to 75 percent of the insured person's primary insurance...

20 CFR 226.51 - Maximum monthly amount.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum monthly amount. 226.51 Section 226.51... EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.51 Maximum monthly amount. The railroad retirement family maximum is equal to an employee's “final average monthly...

20 CFR 404.342 - Mother's and father's benefit amounts.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Disability Benefits for Spouses and Divorced Spouses § 404.342 Mother's and father's benefit amounts. Your mother's or father's monthly benefit is equal to 75 percent of the insured person's primary insurance... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Mother's and father's benefit amounts. 404...

20 CFR 404.342 - Mother's and father's benefit amounts.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Disability Benefits for Spouses and Divorced Spouses § 404.342 Mother's and father's benefit amounts. Your mother's or father's monthly benefit is equal to 75 percent of the insured person's primary insurance... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Mother's and father's benefit amounts. 404...

20 CFR 404.342 - Mother's and father's benefit amounts.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Disability Benefits for Spouses and Divorced Spouses § 404.342 Mother's and father's benefit amounts. Your mother's or father's monthly benefit is equal to 75 percent of the insured person's primary insurance... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Mother's and father's benefit amounts. 404...

Production of basic chromium sulfate by using recovered chromium from ashes of thermally treated leather.

PubMed

Dettmer, Aline; Nunes, Keila Guerra Pacheco; Gutterres, Mariliz; Marcílio, Nilson Romeu

2010-04-15

Leather wastes tanned with chromium are generated during the production process of leather, hence the wastes from hand crafted goods and footwear industries are a serious environmental problem. The thermal treatment of leather wastes can be one of the treatment options because the wastes are rich in chromium and can be used as a raw material for sodium chromate production and further to obtain several chromium compounds. The objective of this study was to utilize the chromium from leather wastes via basic chromium sulfate production to be subsequently applied in a hide tanning. The obtained results have shown that this is the first successful attempt to achieve desired base properties of the product. The result was achieved when the following conditions were applied: a molar ratio between sodium sulfite and sodium dichromate equal to 6; reaction time equal to 5 min before addition of sulfuric acid; pH of sodium dichromate solution equal to 2. Summarizing, there is an opportunity to utilize the dangerous wastes and reused them in the production scheme by minimizing or annulling the environmental impact and to attend a sustainable process development concept. 2009 Elsevier B.V. All rights reserved.

Adsorption of anionic and nonionic surfactant mixtures from synthetic detergents on soils.

PubMed

Rao, Pinhua; He, Ming

2006-05-01

Adsorption of anionic surfactant (sodium dodecylbenzenesulfonate, SDBS) and nonionic surfactant (an alcohol ethoxylates with 12 carbons and 9 oxyethyl groups, A12E9) mixtures, widely used as the major constituents of synthetic detergents in China and become the most common pollutants in the environment, on soils was conducted to investigate the behavior of mixed surfactants in soils. The effects of addition order and mixing ratios of two surfactants, associated with pH and ion strength in solutions, on adsorptions were considered. The results show that saturated adsorption amount of SDBS and A12E9 on soils decreased respectively when A12E9 was added into soils firstly compared with that secondly, possibly resulting from the screening of A12E9 to part adsorption sites on soils and the hydrocarbon chain-chain interactions between SDBS and A12E9. The adsorption of SDBS and A12E9 on soils was enhanced each other at pre-plateau region of isotherms. At plateau region of isotherms, the adsorption of SDBS on soils decreased with the increase of molar fraction of A12E9 in mixed surfactant solutions, while that of A12E9 increased except the molar ratio of SDBS to A12E9 0.0:1.0. With the increase of pH in mixed surfactant solutions, adsorption amount of SDBS and A12E9 on soils decreased, respectively. The reduction of ion strength in soils resulted in the decrease of adsorption amount of SDBS and A12E9 on soils, respectively.

Extrusion of Debris from Primary Molar Root Canals following Instrumentation with Traditional and New File Systems.

PubMed

Thakur, Bhagyashree; Pawar, Ajinkya M; Kfir, Anda; Neelakantan, Prasanna

2017-11-01

To assess the amount of debris extruded apically during instrumentation of distal canals of extracted primary molars by three instrument systems [ProTaper Universal (PTU), ProTaper NEXT (PTN), and self-adjusting file (SAF)] compared with conventional stainless steel hand K-files (HF, control). Primary mandibular molars (n = 120) with a single distal canal were selected and randomly divided into four groups (n = 30) for root canal instrumentation using group I, HF (to size 0.30/0.02 taper), group II, PTU (to size F3), group III, PTN (to size X3), and group IV, SAF. Debris extruded during instrumentation was collected in preweighed Eppendorf tubes, stored in an incubator at 70°C for 5 days and then weighed. Statistical analysis was performed by one-way analysis of variance (ANOVA), followed by Turkey's post hoc test (p = 0.05). All the groups resulted in extrusion of debris. There was statistically significant difference (p < 0.001) in the debris extrusion between the three groups: HF (0.00133 ± 0.00012), PTU (0.00109 ± 0.00005), PTN (0.00052 ± 0.00008), and SAF (0.00026 ± 0.00004). Instrumentation with SAF resulted in the least debris extrusion when used for shaping root canals of primary molar teeth. Debris extrusion in primary teeth poses an adverse effect on the stem cells and may also alter the permanent dental germ. Debris extrusion is rarely reported for primary teeth and it is important for the clinician to know which endodontic instrumentation leads to less extrusion of debris.

Racemized and Isomerized Proteins in Aging Rat Teeth and Eye Lens

PubMed Central

Warmack, Rebeccah A.; Mansilla, Eduardo; Goya, Rodolfo G.

2016-01-01

Abstract The quantification of aspartic acid racemization in the proteins of nonmetabolically active tissues can be used as a measure of chronological aging in humans and other long-lived organisms. However, very few studies have been conducted in shorter-lived animals such as rodents, which are increasingly used as genetic and metabolic models of aging. An initial study had reported significant changes in the ratio of d- to l-aspartate in rat molars with age. Using a sensitive HPLC method for the determination of d- and l-aspartate from protein hydrolysates, we found no accumulation of d-aspartate in the molars of 17 rats that ranged in age from 2 to 44 months, and the amount of d-aspartate per molar did not correspond with molar eruption date as had been previously reported. However, developing an alternate approach, we found significant accumulation of isomerized aspartyl residues in eye lens proteins that are also formed by spontaneous degradation processes. In this study, we used the human protein l-isoaspartate/d-aspartate O-methyltransferase (PCMT1) as an analytical reagent in a sensitive and convenient procedure that could be used to rapidly examine multiple samples simultaneously. We found levels of isomerized aspartyl residues to be about 35 times higher in the lens extracts of 18-month-old rats versus 2-month-old rats, suggesting that isomerization may be an effective marker for biological aging in this range of ages. Importantly, we found that the accumulation appeared to plateau in rats of 18 months and older, indicating that potentially novel mechanisms for removing altered proteins may develop with age. PMID:26650547

Role of reduced precursor and solvolytic reagent molar ratio on preparation and properties of ionogel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupta, Abhishek Kumar; Verma, Yogendra Lal; Singh, Manish Pratap

In the present study, ionogels have been synthesized by immobilizing IL (1-ethyl-3-methylimidazolium tetrafluoroborate) in silica gel matrices using non-aqueous route. In this process, tetraethyl orho-silane (TEOS) as a precursor to silicon dioxide and formic acid as a solvolytic gelating reagent in reduced molar ratio 1:4 were used. We find that reduced molar concentration of formic acid results the formation of ionogels having less number of closed pores (totally isolated from their neighbours), larger density and stable monolithic form. TEM and SEM measurements are used to visualize the morphology of sample and closed pores present in the sample. N{sub 2}-sorption measurementmore » is used to measure the pore parameters of the silica matrices which shows the mesoporous structure. DSC and TGA results show the change in phase transition temperature and thermal stability of IL upon confinement in silica matrices. Moreover, ionic conductivity of bulk and confined IL is measured using impedance spectroscopy and it has been found that it increases with increasing the temperature as well as concentration of IL in ionogels. Apart from these characterization techniques, ionogels have been characterized using FTIR and fluorescence spectroscopy which exhibit the change in vibrational frequencies and fluorescence behaviour of confined IL. - Highlights: • Synthesis of stable ionogel using non-hydrolytic route with reduced precursor and solvolytic reagent molar ratio. • Ionogels are free from entrapped residual reaction product. • The ionogels synthesized with higher amount of ionic liquids show bulk liquid like electrical behaviour.« less

A clinical comparison between nickel titanium springs and elastomeric chains.

PubMed

Bokas, Jim; Woods, Michael

2006-05-01

To compare the rates of maxillary canine retraction and molar anchorage loss when using either NiTi springs or elastomeric chains delivering a known force with sliding edgewise mechanics. Twelve patients who required maxillary canine retraction into first premolar extraction sites as part of their orthodontic treatment were selected. In a split-mouth design, these patients received precalibrated NiTi springs (112 quadrants) and pre-measured elastomeric chains (12 quadrants), all delivering initial forces of approximately 200 g and being reactivated at 28 day intervals. Space closure and forward movement of the maxillary first molars were evaluated using maxillary impressions, which were taken before the start of canine retraction and then at 28 day intervals until canine retraction was almost complete. Statistical analysis revealed that the mean rate of space closure with NiTi springs (1.85 mm/month) was only 0.17 mm/month greater (p = 0.011) than that produced with the elastomeric chains (1.68 mm/month). The mean rates of anchorage loss for the NiTi springs and elastomeric chain were 0.46 mm/month and 0.45 mm/month respectively. This difference was not statistically significant. These amounts of forward molar movement were calculated to be between one quarter and one third of the average space closure per month, even in the presence of a fixed transpalatal arch. The results indicate that the rates of space closure and molar anchorage loss using either NiTi springs or elastomeric chains, if reactivated every 28 days, are likely to be similar.

5 CFR 575.507 - What is the maximum extended assignment incentive that may be paid for a period of service?

Code of Federal Regulations, 2010 CFR

2010-01-01

... greater of— (1) An amount equal to 25 percent of the annual rate of basic pay of the employee at the... periods equals 546 days, and 546 days divided by 365 days equals 1.50 years. ... rate employees who do not have a scheduled annual rate of basic pay, the annual rate in paragraph (a...

28 CFR 104.51 - Payments to eligible individuals.

Code of Federal Regulations, 2013 CFR

2013-07-01

... regarding potential future claims and available funds, and may make additional payments in light of such... amount that is equal to the difference between: (i) The amount that the claimant would have been paid...

26 CFR 1.46-3 - Qualified investment.

Code of Federal Regulations, 2012 CFR

2012-04-01

... equipment, private communication equipment (other than land mobile radio equipment for which the operator... reduced by an amount equal to the lesser of— (a) The amount of money, or the fair market value of other...

26 CFR 1.46-3 - Qualified investment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... equipment, private communication equipment (other than land mobile radio equipment for which the operator... reduced by an amount equal to the lesser of— (a) The amount of money, or the fair market value of other...

26 CFR 1.46-3 - Qualified investment.

Code of Federal Regulations, 2013 CFR

2013-04-01

... equipment, private communication equipment (other than land mobile radio equipment for which the operator... reduced by an amount equal to the lesser of— (a) The amount of money, or the fair market value of other...

26 CFR 1.46-3 - Qualified investment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... equipment, private communication equipment (other than land mobile radio equipment for which the operator... reduced by an amount equal to the lesser of— (a) The amount of money, or the fair market value of other...

77 FR 38042 - TRICARE; Implementation of TRICARE Transitional Outpatient Payments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... amounts using a method similar to Medicare. TRICARE will pay an amount equal to 85 percent of the... TRICARE TOPs provision. The Patient Protection and Affordable Care Act (PPACA) extended the hold harmless...

Phytate intake and molar ratios of phytate to zinc, iron and calcium in the diets of people in China.

PubMed

Ma, G; Li, Y; Jin, Y; Zhai, F; Kok, F J; Yang, X

2007-03-01

To assess the phytate intake and molar ratios of phytate to calcium, iron and zinc in the diets of people in China. 2002 China Nationwide Nutrition and Health Survey is a cross-sectional nationwide representative survey on nutrition and health. The information on dietary intakes was collected using consecutive 3 days 24 h recall by trained interviewers. The data of 68 962 residents aged 2-101 years old from 132 counties were analyzed. The median daily dietary intake of phytate, calcium, iron and zinc were 1186, 338.1, 21.2 and 10.6 mg, respectively. Urban residents consumed less phytate (781 vs 1342 mg/day), more calcium (374.5 vs 324.1 mg/day) and comparable amounts of iron (21.1 vs 21.2 mg/day) and zinc (10.6 vs 10.6 mg/day) than their rural counterparts. A wide variation in phytate intake among residents from six areas was found, ranging from 648 to 1433 mg/day. The median molar ratios of phytate to calcium, iron, zinc and phytate x calcium/zinc were 0.22, 4.88, 11.1 and 89.0, respectively, with a large variation between urban and rural areas. The phytate:zinc molar ratios ranged from 6.2 to 14.2, whereas the phytate x calcium/zinc molar ratios were from 63.7 to 107.2. The proportion of subjects with ratios above the critical values of phytate to iron, phytate to calcium, phytate to zinc and phytate x calcium/zinc were 95.4, 43.7, 23.1 and 8.7%, respectively. All the phytate/mineral ratios of rural residents were higher than that of their urban counterparts. The dietary phytate intake of people in China was higher than those in Western developed countries and lower than those in developing countries. Phytate may impair the bioavailability of iron, calcium and zinc in the diets of people in China.

Effects of epinephrine on lidocaine pharmacokinetics and blood volume in the dental pulp.

PubMed

Hashimoto, Shuichi; Yamashiro, Mikiko; Fujita, Kyohei; Yasuda, Asako; Sunada, Katsuhisa

2014-09-01

Epinephrine potentiates and prolongs the efficacy of local anesthetics by reducing blood flow. We investigated the effect of epinephrine on the pharmacokinetics of lidocaine and the pulpal blood volume after maxillary infiltration anesthesia in rats. We measured the (14)C-radioactivity and (14)C-distribution in the maxilla and the dental pulp after the injection of 2% (14)C-lidocaine with or without 10 μg/mL epinephrine (n = 7) into the palatine mucosa proximal to the first molar. The blood volume in the pulp was measured using (99m)Tc-pertechnetate (n = 5). When lidocaine was injected together with epinephrine, the lidocaine became widely distributed throughout the maxilla and was observed mainly in the first molar pulp. The lidocaine amount in the dental pulp at 10-60 minutes was more than 2 times higher than that after the injection of lidocaine alone. The relative pulpal blood volume after 20 minutes decreased to 63.1% of the value after the injection of lidocaine alone. We found that lidocaine had infiltrated into the molar pulp after infiltration anesthesia. Furthermore, our results suggested that epinephrine augmented the retention of lidocaine in the pulp. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Inhibitory effect of interferon-γ on experimental tooth movement in mice.

PubMed

Kohara, Haruka; Kitaura, Hideki; Yoshimatsu, Masako; Fujimura, Yuji; Morita, Yukiko; Eguchi, Toshiko; Yoshida, Noriaki

2012-09-01

The aim of this study was to investigate the effects of interferon (IFN)-γ on experimental tooth movement in mice using a murine experimental tooth movement model. An Ni-Ti closed-coil spring was inserted between the upper-anterior alveolar bones and the upper-left first molars in mice. We evaluated the relationship between local Ifn-γ mRNA levels and orthodontic tooth movement. In other experiments, IFN-γ was injected adjacent to each first molar every other day during tooth movement. After 12 days, the amount of tooth movement was measured. Tartrate-resistant acid phosphatase (TRAP)-positive cells at the pressure side of each experimental tooth were counted as osteoclasts. Local Ifn-γ mRNA expression increased with orthodontic tooth movement. The number of TRAP-positive cells increased on the pressure side of the first molar. In contrast, the degree of tooth movement and the number of TRAP-positive cells on the pressure side in IFN-γ-injected mice were less than those of control mice. IFN-γ was induced in experimental tooth movement, and could inhibit mechanical force-loaded osteoclastogenesis and tooth movement. These results suggest that IFN-γ might be useful in controlling orthodontic tooth movement because of its inhibitory action on excessive osteoclastogenesis during this movement.

Ferroxidase activity of apoferritin is increased in the presence of platinum nanoparticles.

PubMed

Sennuga, Afolake; van Marwijk, Jacqueline; Whiteley, Chris G

2012-01-27

The ferroxidase activity of horse spleen apoferritin (HSAF) is increased by nine-fold in the presence of platinum nanoparticles. HSAF was mixed with varying concentrations of K2PtCl4 followed by a 20-fold concentration of sodium borohydride to afford Pt:HSAF nanoparticle complexes in a ratio of between 1:250 and 1:4000. Typical colour changes, from colourless or pale yellow to brown, occurred that were dependent on the amount of platinum present. These complexes were characterized by UV/vis, inductively coupled plasma optical emission spectroscopy, Fourier transform infrared, transmission electron microscopy and energy dispersive x-ray spectroscopy. Transmission electron microscopy analysis revealed that the size of nanoparticles increased as the molar ratio of platinum to HSAF increased with an average size diameter of 2-6 nm generated with HSAF:platinum molar ratios of 1:250-1:4000. Fourier transform infrared spectroscopy (FTIR) spectra showed no distinct changes in the structure of HSAF but confirmed that the nanoparticles were attached to the protein. The effect of platinum nanoparticles on the ferroxidase activity of HSAF showed a specific activity of 360 ρmol min(-1) mg(-1), (nine-fold increase over the control) at the molar ratio of HSAF:platinum nanoparticles of 1:1000.

Production and Characterization of Biodiesel from Tung Oil

NASA Astrophysics Data System (ADS)

Park, Ji-Yeon; Kim, Deog-Keun; Wang, Zhong-Ming; Lu, Pengmei; Park, Soon-Chul; Lee, Jin-Suk

The feasibility of biodiesel production from tung oil was investigated. The esterification reaction of the free fatty acids of rung oil was performed using Amberlyst-15. Optimal molar ratio of methanol to oil was determined to be 7.5:1, and Amberlyst-15 was 20.8wt% of oil by response surface methodology. Under these reaction conditions, the acid value of rung oil was reduced to 0.72mg KOH/g. In the range of the molar equivalents of methanol to oil under 5, the esterification was strongly affected by the amount of methanol but not the catalyst. When the molar ratio of methanol to oil was 4.1:1 and Amberlyst-15 was 29.8wt% of the oil, the acid value decreased to 0.85mg KOH/g. After the transesterification reaction of pretreated rung oil, the purity of rung biodiesel was 90.2wt%. The high viscosity of crude rung oil decreased to 9.8mm2/s at 40 °C. Because of the presence of eleostearic acid, which is a main component of tung oil, the oxidation stability as determined by the Rancimat method was very low, 0.5h, but the cold filter plugging point, -11 °C, was good. The distillation process did not improve the fatty acid methyl ester content and the viscosity.

Production and characterization of biodiesel from tung oil.

PubMed

Park, Ji-Yeon; Kim, Deog-Keun; Wang, Zhong-Ming; Lu, Pengmei; Park, Soon-Chul; Lee, Jin-Suk

2008-03-01

The feasibility of biodiesel production from tung oil was investigated. The esterification reaction of the free fatty acids of tung oil was performed using Amberlyst-15. Optimal molar ratio of methanol to oil was determined to be 7.5:1, and Amberlyst-15 was 20.8 wt% of oil by response surface methodology. Under these reaction conditions, the acid value of tung oil was reduced to 0.72 mg KOH/g. In the range of the molar equivalents of methanol to oil under 5, the esterification was strongly affected by the amount of methanol but not the catalyst. When the molar ratio of methanol to oil was 4.1:1 and Amberlyst-15 was 29.8 wt% of the oil, the acid value decreased to 0.85 mg KOH/g. After the transesterification reaction of pretreated tung oil, the purity of tung biodiesel was 90.2 wt%. The high viscosity of crude tung oil decreased to 9.8mm(2)/s at 40 degrees C. Because of the presence of eleostearic acid, which is a main component of tung oil, the oxidation stability as determined by the Rancimat method was very low, 0.5h, but the cold filter plugging point, -11 degrees C, was good. The distillation process did not improve the fatty acid methyl ester content and the viscosity.

Phenolic compounds and antioxidant properties of arabinoxylan hydrolysates from defatted rice bran.

PubMed

Yuwang, Prachit; Sulaeva, Irina; Hell, Johannes; Henniges, Ute; Böhmdorfer, Stefan; Rosenau, Thomas; Chitsomboon, Benjamart; Tongta, Sunanta

2018-01-01

The water unextractable arabinoxylans (WUAX) contain beneficial phenolic compounds that can be used for food rather than for animal feed. The antioxidant activities of defatted rice bran obtained by xylanase-aided extraction is reported herein. The chemical and molecular characteristics of extracted fractions were investigated. The WUAX hydrolysate precipitated by 0-60% ethanol (F60), 60-90% ethanol (F6090), and more than 90% ethanol (F90) had decreased molar masses with increasing ethanol concentration. The fractions of interest, F60 and F6090, contained 75% arabinoxylans with ferulic acid as the major bound phenolic acid, followed by p-coumaric acid. According to chemical-based antioxidant assays F60 and F6090 exhibited higher diphenyl-1-picrylhydrazyl (DPPH) radical scavenging and ferric iron reducing ability than F90 which contained minor contents of small sugars and free phenolic acids. In cell-based antioxidant assays, using the fluorescent 2',7'-dichlorofluorescein diacetate probe, all three fractions were potent intracellular scavengers. The high molar mass of WUAX hydrolysates with high amount of bound phenolics contributes to the chemical-based antioxidant activity. All fractions of WUAX hydrolysates showed high potent intracellular scavenging activity regardless of molar mass, content and the component of bound phenolics. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Use of ceric ammonium sulphate and two dyes, methyl orange and indigo carmine, in the determination of lansoprazole in pharmaceuticals.

PubMed

Basavaiah, Kanakapura; Ramakrishna, Veeraiah; Kumar, Urdigere Rangachar Anil

2007-06-01

Two spectrophotometric methods are proposed for the assay of lansoprazole (LPZ) in bulk drug and in dosage forms using ceric ammonium sulphate (CAS) and two dyes, methyl orange and indigo carmine, as reagents. The methods involve addition of a known excess of CAS to LPZ in acid medium, followed by determination of residual CAS by reacting with a fixed amount of either methyl orange, measuring the absorbance at 520 nm (method A), or indigo carmine, measuring the absorbance at 610 nm (method B). In both methods, the amount of CAS reacted corresponds to the amount of LPZ and the measured absorbance was found to increase linearly with the concentration of LPZ, which is corroborated by the correlation coefficients of 0.9979 and 0.9954 for methods A and B, respectively. The systems obey Beer's law for 0.5-7.0 microg mL(-1) and 0.25-3.0 microg mL(-1) for methods A and B, respectively. The apparent molar absorptivities were calculated to be 3.0 x 10(4) and 4.4 x 10(4) L mol(-1) cm(-1) for methods A and B, respectively. The limits of detection (LOD) and quantification (LOQ) were calculated to be 0.08 and 0.25 microg mL(-1) for method A, and 0.09 and 0.27 microg mLs(-1) for method B, respectively. The intra-day and inter-day precision and accuracy of the methods were evaluated according to the current ICH guidelines. Both methods were of comparable accuracy (er < or = 2 %). Also, both methods are equally precise as shown by the relative standard deviation values < 1.5%. No interference was observed from common pharmaceutical adjuvants. The accuracy of the methods was further ascertained by performing recovery studies using the standard addition method. The methods were successfully applied to the assay of LPZ in capsule preparations and the results were statistically compared with those of the literature UV-spectrophotometric method by applying Student's t-test and F-test.

Biogeochemical controls on interactions of microbial iron and sulfate reduction

NASA Astrophysics Data System (ADS)

Kirk, M. F.; Paper, J. M.; Haller, B. R.; Shodunke, G. O.; Marquart, K. A.; Jin, Q.

2016-12-01

Although iron and sulfate reduction are two of the most common microbial electron accepting processes in anoxic settings, the relative influences of environmental factors that guide interactions between each are poorly known. Identifying these factors is a key to predicting how those interactions will respond to future environmental changes. In this study, we used semi-continuous bioreactors to examine the influence of pH, electron donor flux, and sulfate availability. The reactors contained 100 mL of aqueous media and 1 g of marsh sediment amended with goethite (1 mmol). One set of reactors received acidic media (pH 6) while the other set received alkaline media (pH 7.5). Media for both sets of reactors included acetate (0.25 and 1 mM), which served as an electron donor, and sulfate (2.5 mM). We also included sets of sulfate-deficient and acetate-deficient control reactors. We maintained a fluid residence time of 35 days in the reactors by sampling and feeding them every seven days during the 91-day incubation. Our results show that, under the conditions tested, pH had a larger influence on the balance between each reaction than acetate concentration. In acidic reactors, the molar amount of iron reduced exceeded the amount of sulfate reduced by a factor of 3 in reactors receiving media with 0 and 0.25 mM acetate and a factor of 2 in reactors receiving 1 mM acetate. Under alkaline conditions, iron and sulfate were reduced in nearly equal proportions, regardless of influent acetate concentration. Results from sulfate-deficient control reactors show that the presence of sulfate reduction increased the extent of iron reduction in all reactors, but particularly those with alkaline pH. Under acidic conditions, the amount of iron reduced was greater by a factor of 1.2 if sulfate reduction occurred simultaneously than if it did not. Under alkaline conditions, that factor increased to 8.2. Hence, pH influenced the extent to which sulfate reduction promoted iron reduction.

Process for the recovery of strontium from acid solutions

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1992-03-31

The invention is a process for selectively extracting strontium and technetium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant is a macrocyclic polyether in a diluent which is insoluble in water, but which will itself dissolve a small amount of water. The process will extract strontium and technetium values from nitric acid solutions which are up to 6 molar in nitric acid. 5 figs.

Production of mullite fibers

NASA Technical Reports Server (NTRS)

Tucker, Dennis S. (Inventor); Sparks, J. Scott (Inventor)

1991-01-01

Disclosed here is a process for making mullite fibers wherein a hydrolizable silicon compound and an aluminum compound in the form of a difunctional aluminum chelate are hydrolized to form sols using water and an alcohol with a catalytic amount of hydrochloric acid. The sols are mixed in a molar ratio of aluminum to silicon of 3 to 1 and, under polycondensation conditions, a fibrous gel is formed. From this gel the mullite fibers can be produced.

An improved synthesis of 2,4,8,10-tetroxaspiro /5.5/ undecane /pentaerythritol diformal/

NASA Technical Reports Server (NTRS)

Poshkus, A. C.

1979-01-01

It is found that high yields of pentaerythritol diformal can be prepared in less than 10 minutes by heating a stirred mixture of pentaerythritol with a slight excess of paraformaldehyde up to about 120 C in the presence of catalic amounts of acid, but without any solvents or with only a small amount of water. The reaction was carried out in two stages: first by preparing the monoformal with a molar equivalent of paraformaldehyde in about five minutes, and then, after cooling to about 70 C, adding the remainder of paraformaldehyde in 1% excess, and heating to about 120 C for a total heating time of 10 minutes

26 CFR 53.4942(a)-2 - Computation of undistributed income.

Code of Federal Regulations, 2010 CFR

2010-04-01

... any taxable year as of any time, the amount by which: (1) The distributable amount (as defined in paragraph (b) of this section) for such taxable year, exceeds (2) The qualifying distributions (as defined...: (i) For taxable years beginning before January 1, 1982, an amount equal to the greater of the minimum...

7 CFR 1806.28 - Borrowers required to escrow.

Code of Federal Regulations, 2010 CFR

2010-01-01

... insufficient funds to pay the flood insurance premium when due, the County Supervisor will request the borrower to pay an amount equal to the difference between the premium due and the escrow balance in a lump sum within 30 days after notification. If the borrower fails to remit the amount requested, the amount will...

26 CFR 301.6334-3 - Determination of exempt amount.

Code of Federal Regulations, 2010 CFR

2010-04-01

... means an amount equal to— (1) The sum of— (i) The standard deduction (including additional standard... income other than on a weekly basis, the amount payable to that individual during any applicable pay... a regular weekly basis. (2) Specific pay periods other than weekly. In the case of wages, salary, or...

20 CFR 404.353 - Child's benefit amounts.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Child's benefit amounts. 404.353 Section 404... Child's Benefits § 404.353 Child's benefit amounts. (a) General. Your child's monthly benefit is equal... as explained in § 404.304. (b) Entitlement to more than one benefit. If you are entitled to a child's...

20 CFR 404.353 - Child's benefit amounts.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Child's benefit amounts. 404.353 Section 404... Child's Benefits § 404.353 Child's benefit amounts. (a) General. Your child's monthly benefit is equal... as explained in § 404.304. (b) Entitlement to more than one benefit. If you are entitled to a child's...

20 CFR 404.353 - Child's benefit amounts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Child's benefit amounts. 404.353 Section 404... Child's Benefits § 404.353 Child's benefit amounts. (a) General. Your child's monthly benefit is equal... as explained in § 404.304. (b) Entitlement to more than one benefit. If you are entitled to a child's...

20 CFR 404.353 - Child's benefit amounts.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Child's benefit amounts. 404.353 Section 404... Child's Benefits § 404.353 Child's benefit amounts. (a) General. Your child's monthly benefit is equal... as explained in § 404.304. (b) Entitlement to more than one benefit. If you are entitled to a child's...

20 CFR 404.353 - Child's benefit amounts.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Child's benefit amounts. 404.353 Section 404... Child's Benefits § 404.353 Child's benefit amounts. (a) General. Your child's monthly benefit is equal... as explained in § 404.304. (b) Entitlement to more than one benefit. If you are entitled to a child's...

42 CFR 423.279 - National average monthly bid amount.

Code of Federal Regulations, 2010 CFR

2010-10-01

... bid amounts for each prescription drug plan (not including fallbacks) and for each MA-PD plan...(h) of the Act. (b) Calculation of weighted average. (1) The national average monthly bid amount is a....258(c)(1) of this chapter) and the denominator equal to the total number of Part D eligible...

42 CFR 423.279 - National average monthly bid amount.

Code of Federal Regulations, 2011 CFR

2011-10-01

... bid amounts for each prescription drug plan (not including fallbacks) and for each MA-PD plan...(h) of the Act. (b) Calculation of weighted average. (1) The national average monthly bid amount is a....258(c)(1) of this chapter) and the denominator equal to the total number of Part D eligible...

Effect of butyrate infusion into the rumen on butyrate flow to the duodenum, selected gene expression in the duodenum epithelium, and nutrient digestion in sheep.

PubMed

Górka, P; Śliwiński, B; Flaga, J; Wieczorek, J; Godlewski, M M; Wierzchoś, E; Zabielski, R; Kowalski, Z M

2017-05-01

The aim of the study was to determine the effect of butyrate infusion into the rumen on butyrate flow to the duodenum, expression of short-chain fatty acid (SCFA) transporters (monocarboxylate transporter-1, -2, and -4) and receptors (G protein coupled receptor-41 and -43) in the duodenal epithelium and nutrient digestion in sheep. Eight wethers (39.0 ± 3.00 kg; mean ± SD) with ruminal and T-shape duodenal cannulas were allocated to 4 × 4 replicated Latin square design with each experimental period lasting for 21 d (12 d of adaptation and 9 d for data and sample collection). Experimental treatments were: 1) distilled water infusion into the rumen (CONT); 2) 15 g/d of butyric acid infusion into the rumen (BUT15); 3) 30 g/d of butyric acid infusion into the rumen (BUT30); and 4) 45 g/d of butyric acid infusion into the rumen (BUT45). The daily dose of butyrate was infused into the rumen via the rumen cannula, with 200 mL of solution of butyric acid and distilled water, at a constant rate (0.1389 mL/min) throughout the day using a peristaltic pump. Correspondingly, 200 mL/d of distilled water was infused into the rumen of CONT. The wethers were fed daily 900 g of chopped meadow hay and 200 g of concentrate in two equal meals at 0600 and 1800 h. Butyrate infusion into the rumen did not affect total SCFA concentration in the rumen fluid ( > 0.11). Molar proportion of butyrate in total SCFA linearly increased, and molar proportion of acetate and isovalerate linearly decreased ( ≤ 0.02) with an increasing amount of butyrate infused into the rumen. The molar proportion of butyrate in total SCFA in the duodenal digesta linearly increased ( < 0.01), and butyrate flow to duodenum tended to linearly increase ( = 0.06) with an increasing dose of exogenous butyrate delivered to the rumen. Butyrate infusion into the rumen did not affect ( ≥ 0.14) the mRNA expression of monocarboxylate transporter-2 and -4 and G protein coupled receptor-43 in the duodenal epithelium. The G protein coupled receptor-41 and monocarboxylate transporter-1 mRNA expression in the duodenal epithelium was very low in many of the analyzed samples. Digestibility of organic matter, neutral detergent fiber, and acid detergent fiber in the stomach (forestomach and abomasum) decreased for BUT15 and BUT30 and then increased for BUT45 (quadratic, ≤ 0.04); however, neither digestibility in the intestine nor total tract digestibility differed between treatments ( ≥ 0.10).

26 CFR 1.101-2 - Employees' death benefits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... such contingency (to the extent that such amounts are equal to or less than those described in... amount is payable to anyone with respect to what would have been the widow's annuity. In view of these...

Method and device for determining heats of combustion of gaseous hydrocarbons

NASA Technical Reports Server (NTRS)

Singh, Jag J. (Inventor); Sprinkle, Danny R. (Inventor); Puster, Richard L. (Inventor)

1988-01-01

A method and device is provided for a quick, accurate and on-line determination of heats of combustion of gaseous hydrocarbons. First, the amount of oxygen in the carrier air stream is sensed by an oxygen sensing system. Second, three individual volumetric flow rates of oxygen, carrier stream air, and hydrocrabon test gas are introduced into a burner. The hydrocarbon test gas is fed into the burner at a volumetric flow rate, n, measured by a flowmeter. Third, the amount of oxygen in the resulting combustion products is sensed by an oxygen sensing system. Fourth, the volumetric flow rate of oxygen is adjusted until the amount of oxygen in the combustion product equals the amount of oxygen previously sensed in the carrier air stream. This equalizing volumetric flow rate is m and is measured by a flowmeter. The heat of combustion of the hydrocrabon test gas is then determined from the ratio m/n.

Has the "Equal Environments" assumption been tested in twin studies?

PubMed

Eaves, Lindon; Foley, Debra; Silberg, Judy

2003-12-01

A recurring criticism of the twin method for quantifying genetic and environmental components of human differences is the necessity of the so-called "equal environments assumption" (EEA) (i.e., that monozygotic and dizygotic twins experience equally correlated environments). It has been proposed to test the EEA by stratifying twin correlations by indices of the amount of shared environment. However, relevant environments may also be influenced by genetic differences. We present a model for the role of genetic factors in niche selection by twins that may account for variation in indices of the shared twin environment (e.g., contact between members of twin pairs). Simulations reveal that stratification of twin correlations by amount of contact can yield spurious evidence of large shared environmental effects in some strata and even give false indications of genotype x environment interaction. The stratification approach to testing the equal environments assumption may be misleading and the results of such tests may actually be consistent with a simpler theory of the role of genetic factors in niche selection.

In the search for new anticancer drugs XII. Synthesis and biological evaluation of spin labeled nitrosoureas.

PubMed

Sosnovsky, G; Li, S W

1985-04-15

The spin labeled nitrosourea 1-(2-chloroethyl)-3-(1-oxyl-2,2,6,6- tetramethyl-piperidinyl)-1-nitrosourea (SLCNU, 4) and its analogues 5-7 were synthesized either by a regio-selective method or by a conventional route via the nitrosation of the spin labeled intermediates (11a-e). Nitrosation of the ureas 11a-e with dinitrogen tetraoxide resulted in better yields than those obtained with sodium nitrite. The nitrosoureas 4-8 were tested for their anticancer activity against the lymphocytic leukemia P388 in mice. Thus, either at the equal molar dose or at the dose of equal toxicity level, the SLCNU (4) was found to be more active than the clinically used CCNU (1). Unlike CCNU (1) whose LD50 is 56 mg/kg, the SLCNU (4) possesses a low toxicity (LD50 123 mg/kg). Therefore, SLCNU (4) is a promising new entry into the nitrosourea class of anticancer drugs.

Glasses of the As/sub 2/S/sub 3/-T1/sub 2/S system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gutenev, M.S.

1986-08-01

A dielcometric study of (AsS /SUB 1.5/ ) /SUB 1-x/ (TiS /SUB 0.5/ ) /SUB x/ (0 is less than or equal to x is less than or equal to 0.61) glasses was carried out. Glassforming alloys were prepared in thin-walled quartz ampules by rapid cooling from 700 C in air. The methods of determination of permittivity, refractive index, and density, the values of which are shown here, have been previously discussed. The molar infrared polarizability is calculated from the experimental data previously gathered, and the concentration dependence is shown. In this paper, the presence of chemical atomic order inmore » T1AsS/sub 2/ glass described by TISAsS /SUB 2/2/ structural units was experimentally proved. An assumption was made of strong mutual influence of T1AsS/sub 2/ and AsS /SUB 1.5/ complexes caused by coordination of thallium with bridging sulfur atoms.« less

Multivariate Analysis of Factors Affecting Presence and/or Agenesis of Third Molar Tooth

PubMed Central

Alam, Mohammad Khursheed; Hamza, Muhammad Asyraf; Khafiz, Muhammad Aizuddin; Rahman, Shaifulizan Abdul; Shaari, Ramizu; Hassan, Akram

2014-01-01

To investigate the presence and/or agenesis of third molar (M3) tooth germs in orthodontics patients in Malaysian Malay and Chinese population and evaluate the relationship between presence and/or agenesis of M3 with different skeletal malocclusion patterns and sagittal maxillomandibular jaw dimensions. Pretreatment records of 300 orthodontic patients (140 males and 160 females, 219 Malaysian Malay and 81 Chinese, average age was 16.27±4.59) were used. Third-molar agenesis was calculated with respect to race, genders, number of missing teeth, jaws, skeletal malocclusion patterns and sagittal maxillomandibular jaw dimensions. The Pearson chi-square test and ANOVA was performed to determine potential differences. Associations between various factors and M3 presence/agenesis groups were assessed using logistic regression analysis. The percentages of subjects with 1 or more M3 agenesis were 30%, 33% and 31% in the Malaysian Malay, Chinese and total population, respectively. Overall prevalence of M3 agenesis in male and female was equal (P>0.05). The frequency of the agenesis of M3s is greater in maxilla as well in the right side (P>0.05). The prevalence of M3 agenesis in those with a Class III and Class II malocclusion was relatively higher in Malaysian Malay and Malaysian Chinese population respectively. Using stepwise regression analyses, significant associations were found between Mx (P<0.05) and ANB (P<0.05) and M3 agenesis. This multivariate analysis suggested that Mx and ANB were significantly correlated with the M3 presence/agenesis. PMID:24967595

Long-Term Results of Mandibular Distraction Osteogenesis with a Resorbable Device in Infants with Robin Sequence: Effects on Developing Molars and Mandibular Growth.

PubMed

Paes, Emma C; Bittermann, Gerhard K P; Bittermann, Dirk; Muradin, Marvick M; van Hogezand, Rose; Etty, Erika; Mink van der Molen, Aebele B; Kon, Moshe; Breugem, Corstiaan C

2016-02-01

Mandibular distraction osteogenesis with a unidirectional resorbable device is an effective treatment option for severe upper airway obstruction in infants with Robin sequence. Long-term effects, especially with regard to tooth development and mandibular outgrowth, are not known. Robin sequence infants with a follow-up of greater than or equal to 5 years were included. Baseline characteristics were extracted from medical records. Panoramic and lateral cephalometric radiographs were analyzed and patients were recalled for physical examination. Ten infants underwent mandibular distraction osteogenesis at a mean age of 3.7 months (median, 19 months; range, 11 days to 27 months). Mean length of follow-up was 6.8 years (range, 5.0 to 7.9 years). Ten Robin sequence infants without mandibular distraction osteogenesis (mean length of follow-up, 7.4 years; range, 6.7 to 8.9 years) were the controls. Shape anomalies, positional changes, and root malformations of molars were seen significantly more often than in the control group (p = 0.007, p = 0.009, and p = 0.043, respectively). Mandibular length was shorter (p = 0.030), but mandibular ramus height was comparable (p = 0.838) with that of the non-mandibular distraction osteogenesis group. Compared with healthy controls, all Robin sequence infants had a significantly shorter mandible. Mandibular distraction osteogenesis with a resorbable system reveals overall good short- and long-term results, but the effects on developing molars and mandibular outgrowth likely necessitate secondary procedures. This factor should be considered when deciding on treatment options and counseling of parents. Therapeutic, III.

The complex fluid dynamics of simple diffusion

NASA Astrophysics Data System (ADS)

Vold, Erik

2017-11-01

Diffusion as the mass transport process responsible for mixing fluids at the atomic level is often underestimated in its complexity. An initial discontinuity between two species of different atomic masses exhibits a mass density discontinuity under isothermal pressure equilibrium implying equal species molar densities. The self-consistent kinetic transport processes across such an interface leads to a zero sum of mass flux relative to the center of mass and so diffusion alone cannot relax an initially stationary mass discontinuity nor broaden the density profile at the interface. The diffusive mixing leads to a molar imbalance which drives a center of mass velocity which moves the heavier species toward the lighter species leading to the interfacial density relaxation. Simultaneously, the species non-zero molar flux modifies the pressure profile in a transient wave and in a local perturbation. The resulting center of mass velocity has two components; one, associated with the divergence of the flow, persists in the diffusive mixing region throughout the diffusive mixing process, and two, travelling waves at the front of the pressure perturbations propagate away from the mixing region. The momentum in these waves is necessary to maintain momentum conservation in the center of mass frame. Thus, in a number of ways, the diffusive mixing provides feedback into the small scale advective motions. Numerical methods which diffuse all species assuming P-T equilibrium may not recover the subtle dynamics of mass transport at an interface. Work performed by the LANS, LLC, under USDOE Contract No. DE-AC52-06NA25396, funded by the (ASC) Program.

Development and freeze-thaw durability of high flyash-content concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sajadi, J.

1987-01-01

Objectives were to investigate the effects on concrete strength, drying shrinkage, freeze-thaw durability, and air-void system parameters of replacing various amounts of portland cement with different types of fly ash and to compare selected characteristics of such fly-ash concretes and fly-ash concretes containing a high-range water-reducing admixture to those of a control mixture. It was concluded that concrete mixtures with 90-day compressive strengths equal to the control could be produced when large amounts of cement were replaced by fly ash. In addition, when the high-range water-reducing admixtures was employed, very large amounts of cement could be replaced by fly ashmore » to yield mixtures whose compressive strengths were equal to or greater than the strengths of the control mix at all ages. The maximum amount of cement that could be replaced for equal-strength mixtures depended upon the nature of the fly ash. Drying shrinkage of plain fly-ash concretes and fly-ash concretes containing the high-range water-reducing admixture were similar to those of the control mix. The optimum fly-ash content in a concrete is comparable in strength and durability to a conventional (control) concrete was influenced by the chemical and physical characteristics of the fly ash.« less

Hydroxychloroquine niosomes: a new trend in topical management of oral lichen planus.

PubMed

Bendas, Ehab R; Abdullah, Hamoud; El-Komy, Mohamed H M; Kassem, Mohamed A A

2013-12-31

The work aimed at studying a novel topical niosomal gel formulation of hydroxychloroquine for the management of oral lichen planus. Niosomes have been reported as conceivable vesicles to deliver drug molecules to the desired mucous membrane or skin layers. Hydroxychloroquine niosomes were designed using different methods of preparation. Tween 20 and cholesterol in molar ratio (1:0.5) were used. The prepared systems were characterized for entrapment efficiency, particle size and in vitro drug release. Different factors affecting the encapsulation of hydroxychloroquine in niosomes were studied vs. varying the type of surfactant, the cholesterol:surfactant molar ratio and the amount of the drug. The selected noisome formulation was dispersed in different gel formulations and evaluated according to the in vitro drug release and the physical stability. The results showed that the type of surfactant, cholesterol ratio and incorporated amount of drug altered the entrapment efficiency and the in vitro release of hydroxychloroquine from niosomes. The optimum formulation was prepared by reverse phase evaporation technique using Brij 98:cholesterol molar ratio (1:1.5) and containing 20mg of hydroxychloroquine and incorporated in 20% w/v Pluronic F-127 gel. A double-blind, controlled clinical study was performed using two groups of patients. Group A (n=11) who received hydroxychloroquine niosomal gel formulation, one application-a-day over 4 months showed 64.28% reduction in the size of lesions and the average score of pain was reduced from "4" to "1". Compared to placebo group B (n=5), who showed only 3.94% reduction in the lesion size and the average score of pain was remained "3". Our results suggest that these niosomal formulations could constitute a promising approach for the topical treatment of oral lichen planus in short time with less side effects and no recurrence after stopping the treatment. Copyright © 2013 Elsevier B.V. All rights reserved.

Effects of clodronate on early alveolar bone remodeling and root resorption related to orthodontic forces: a histomorphometric analysis.

PubMed

Choi, Josefina; Baek, Seung-Hak; Lee, Jae-Il; Chang, Young-Il

2010-11-01

The objective of this study was to evaluate the short-term effects of clodronate, a first-generation bisphosphonate, on early alveolar bone remodeling and root resorption related to orthodontic tooth movement. The samples consisted of 54 sex-matched Wistar rats (weight, 180-230 g) allocated to the 2.5 mmol/L clodronate, 10 mmol/L clodronate, and control groups (n = 18 for each group). After application of a nickel-titanium closed-coil spring (force, 60 g) between the maxillary central incisor and first molar, 2.5 mmol/L of clodronate, 10 mmol/L of clodronate, or saline solution was injected into the subperiosteum adjacent to the maxillary first molar every third day. All animals received tetracycline, calcein, and alizarin red by intraperitoneal injection at 1, 6, and 14 days, respectively. The amounts of tooth movement were measured at 3, 6, 9, 12, and 15 days. The animals were killed at 4, 7, and 17 days. Histomorphometric analyses of bone mineral appositional rate, labeled surface, percentage of root resorption area, and number of root resorption lacunae of the mesiobuccal root of the maxillary first molar at 4, 7, and 17 days were done. One-way analysis of variance (ANOVA) with the post-hoc test were done for statistical analyses. Rats in the 10 mmol/L clodronate group had significant decreases of tooth movement (12 and 15 days, P <0.05) and percentages of root resorption area and numbers of root resorption lacunae (7 day, P <0.05), and increases of labeled surface and mineral appositional rates (17 day, P <0.05) over those of the 2.5 mmol/L clodronate and control groups. Although clodronate might decrease root resorption related to orthodontic tooth movement, patients should be informed about a possible decrease in the amount of tooth movement and a prolonged period of orthodontic treatment. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Selective and sensitized spectrophotometric determination of trace amounts of Ni(II) ion using α-benzyl dioxime in surfactant media

NASA Astrophysics Data System (ADS)

Ghaedi, Mehrorang

2007-02-01

Highly sensitive and interference-free sensitized spectrophotometric method for the determination of Ni(II) ions is described. The method is based on the reaction between Ni(II) ion and benzyl dioxime in micellar media in the presence of sodium dodecyl sulfate (SDS). The absorbance is linear from 0.1 up to 25.0 μg mL -1 in aqueous solution with repeatability (RSD) of 1.0% at a concentration of 1 μg mL -1 and a detection limit of 0.12 ng mL -1 and molar absorption coefficient of 68,600 L mol -1 cm -1. The influence of reaction variables including type and amount of surfactant, pH, and amount of ligand and complexation time and the effect of interfering ions are investigated. The proposed procedure was applied to the determination of trace amounts of Ni(II) ion in tap water, river water, chocolate and vegetable without separation or organic solvent extraction.

Hydrothermal synthesis of highly crystalline ZnO nanorod arrays: Dependence of morphology and alignment on growth conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azzez, Shrook A., E-mail: shurouq44@yahoo.com; Hassan, Z.; Alimanesh, M.

Highly oriented zinc oxide nanorod were successfully grown on seeded p-type silicon substrate by hydrothermal methode. The morphology and the crystallinty of ZnO c-axis (002) arrays were systematically studied using field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) methods. The effect of seed layer pre-annealing on nanorods properties was explained according to the nucleation site of ZnO nanoparticles on silicon substrate. In addition, the variation of the equal molarity of zinc nitrate hexahydrate and hexamine concentrations in the reaction vessel play a crucial role related to the ZnO nanorods.

24 CFR 248.161 - Mandatory sale of housing in excess of the Federal cost limit.

Code of Federal Regulations, 2010 CFR

2010-04-01

... value. At the time of submission of the offer, the potential purchaser must also submit the... potential income equal to the amount determined by multiplying 120 percent of the prevailing rents in the... amount not exceeding the difference between the amount of assistance provided under paragraph (c) of this...

24 CFR 248.161 - Mandatory sale of housing in excess of the Federal cost limit.

Code of Federal Regulations, 2012 CFR

2012-04-01

... value. At the time of submission of the offer, the potential purchaser must also submit the... potential income equal to the amount determined by multiplying 120 percent of the prevailing rents in the... amount not exceeding the difference between the amount of assistance provided under paragraph (c) of this...

24 CFR 248.161 - Mandatory sale of housing in excess of the Federal cost limit.

Code of Federal Regulations, 2014 CFR

2014-04-01

... value. At the time of submission of the offer, the potential purchaser must also submit the... potential income equal to the amount determined by multiplying 120 percent of the prevailing rents in the... amount not exceeding the difference between the amount of assistance provided under paragraph (c) of this...

24 CFR 248.161 - Mandatory sale of housing in excess of the Federal cost limit.

Code of Federal Regulations, 2011 CFR

2011-04-01

... value. At the time of submission of the offer, the potential purchaser must also submit the... potential income equal to the amount determined by multiplying 120 percent of the prevailing rents in the... amount not exceeding the difference between the amount of assistance provided under paragraph (c) of this...

24 CFR 248.161 - Mandatory sale of housing in excess of the Federal cost limit.

Code of Federal Regulations, 2013 CFR

2013-04-01

... value. At the time of submission of the offer, the potential purchaser must also submit the... potential income equal to the amount determined by multiplying 120 percent of the prevailing rents in the... amount not exceeding the difference between the amount of assistance provided under paragraph (c) of this...

39 CFR 310.5 - Payment of postage on violation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... destination. (b) The amount equal to postage will be due and payable not later than 15 days after receipt of... persons who engage in, cause, or assist such activity to pay an amount or amounts not exceeding the total... 959 of this chapter. (c) Refusal to pay an unappealed demand or a demand that becomes final after...

24 CFR 1000.58 - Are there limitations on the investment of IHBG funds?

Code of Federal Regulations, 2011 CFR

2011-04-01

... of the funds, even in the event of bank failure. (d) IHBG funds shall be held in one or more accounts... in an amount equal to the annual formula grant amount less any formula grant amounts allocated for the operating subsidy element of the Formula Current Assisted Housing Stock (FCAS) component of the...

Evaluation of the anaesthetic properties and tolerance of 1:100,000 articaine versus 1:100,000 lidocaine. A comparative study in surgery of the lower third molar

PubMed Central

Barona-Dorado, Cristina; Martín-Arés, María; Cortés-Bretón-Brinkman, Jorge; Martínez-González, José M.

2012-01-01

Objectives: To evaluate the anaesthetic properties and tolerance of articaine versus lidocaine at equal vasoconstrictor concentration. Study Design: A total of 96 male and female patients who underwent surgical treatment of the lower third molar participated. Patients were randomly assigned to articaine hydrochloride with epinephrine 1:100,000 and lidocaine hydrochloride with epinephrine 1:100,000. The variables analysed were latency period, duration of anaesthetic effect, tolerance and adverse reactions. Results: Both the latency period and the duration of anaesthetic effect were greater for articaine, although the differences were not statistically significant. Latency: mean difference of 2.70 ± 2.12 minutes (95%CI of -1.51 minutes - 6.92 minutes). Duration: mean difference of -33 minutes 5 seconds ± 31 minutes (95% CI -1 hour 35 minutes - 29 minutes). There were 4 adverse events that did not require the patients to be withdrawn from the study. Conclusions: The anaesthetics in this study have very similar properties for use in surgery and have demonstrated a good safety and tolerability profile Key words: Articaine, lidocaine, vasoconstrictor, adverse reactions. PMID:22143691

Dissolution profile of dolomite in chloric acid solution: The effect of chloric acid concentration and pulp density

NASA Astrophysics Data System (ADS)

Solihin, Indriani, Mubarok, M. Zaki

2018-05-01

Dolomite is one of carbonate minerals that contain magnesium. Magnesium is important element used in many aspects of life such as cofactor of many enzymes in human body, nutrient for plants, and raw material in automotive industry. Dolomite can be processed through low temperature process to obtain magnesium and calcium oxide that is needed in important applications such as base material for making drugs, raw material in the synthesize slow release fertilizer, materials for fire retardant, component for catalyst, etc. One of the important step of this low temperature process is dissolution of dolomite. Optimizing the dissolution process determines the % extraction of magnesium and calcium oxide from dolomite. The dissolution of dolomite from Gresik, East Java Provence Indonesia, in chloric acid solution has been conducted. Chloric acid concentration and pulp density are the variables that were observed. The dissolution of magnesium and calcium from Gresik dolomite was found to be very fast. The stable stage of dissolution can be reached for 5-10 seconds. The % extraction is mainly determined by the molar ratio of chloric acid / dolomite. At molar ratio of chloric acid / dolomite equal or above stoichiometric of dolomite dissolution, % extraction of magnesium is almost 100 %.

29 CFR 503.23 - Civil money penalty assessment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... penalties that are equal to the difference between the amount that should have been paid and the amount that... the violator achieved a financial gain due to the violation, or the potential financial loss or potential injury to the workers. ...

29 CFR 503.23 - Civil money penalty assessment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... penalties that are equal to the difference between the amount that should have been paid and the amount that... the violator achieved a financial gain due to the violation, or the potential financial loss or potential injury to the workers. ...

29 CFR 503.23 - Civil money penalty assessment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... penalties that are equal to the difference between the amount that should have been paid and the amount that... the violator achieved a financial gain due to the violation, or the potential financial loss or potential injury to the workers. ...

13 CFR 120.847 - Requirements for the Loan Loss Reserve Fund (LLRF).

Code of Federal Regulations, 2011 CFR

2011-01-01

... by all parties in a timely fashion, and that all required deposits are made. (b) PCLP CDC Exposure... establish and maintain an LLRF equal to one percent of the original principal amount (the face amount) of...

13 CFR 120.847 - Requirements for the Loan Loss Reserve Fund (LLRF).

Code of Federal Regulations, 2010 CFR

2010-01-01

... by all parties in a timely fashion, and that all required deposits are made. (b) PCLP CDC Exposure... establish and maintain an LLRF equal to one percent of the original principal amount (the face amount) of...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Huajuan; Zhao, Yanbao, E-mail: zhaoyb902@henu.edu.cn; Sun, Lei

Graphical abstract: A simple method for the synthesis of novel micrometer flower-like Cu/PVP architectures was introduced. Highlights: {yields} Micrometer flower-like copper/polyvinylpyrrolidone architectures were obtained by a simple chemical route. {yields} The amount of N{sub 2}H{sub 4}{center_dot}H{sub 2}O, the reaction temperature, the molar ratio of CuCl{sub 2} to PVP and different molecular weights of PVP play an important role in the controlling the morphology of the Cu/PVP architectures. {yields} A possible mechanism of the formation of Cu/PVP architectures was discussed. -- Abstract: Micrometer-sized flower-like Cu/polyvinylpyrrolidone (PVP) architectures are synthesized by the reduction of copper (II) salt with hydrazine hydrate in aqueousmore » solution in the presence of PVP capping agent. The resulting Cu/PVP architectures are investigated by UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). The Cu/PVP flowers have uniform morphologies with an average diameter of 10 {mu}m, made of several intercrossing plates. The formation of Cu/PVP flowers is a new kinetic control process, and the factors such as the amount of N{sub 2}H{sub 4}{center_dot}H{sub 2}O, reaction temperature, molar ratio of CuCl{sub 2} to PVP and molecular weight of PVP have significant effect on the morphology of Cu/PVP architectures. A possible mechanism of the formation of micrometer Cu/PVP architectures was discussed.« less

Preparation of Thermo-Responsive and Cross-Linked Fluorinated Nanoparticles via RAFT-Mediated Aqueous Polymerization in Nanoreactors.

PubMed

Ma, Jiachen; Zhang, Luqing; Geng, Bing; Azhar, Umair; Xu, Anhou; Zhang, Shuxiang

2017-01-25

In this work, a thermo-responsive and cross-linked fluoropolymer poly(2,2,2-Trifluoroethyl) methacrylate (PTFEMA) was successfully prepared by reversible addition-fragmentation chain transfer (RAFT) mediated aqueous polymerization with a thermo-responsive diblock poly(dimethylacrylamide- b - N -isopropylacrylamide) (PDMA- b -PNIPAM) that performed a dual function as both a nanoreactor and macro-RAFT agent. The cross-linked polymer particles proved to be in a spherical-like structure of about 50 nm in diameter and with a relatively narrow particle size distribution. ¹H-NMR and 19 F-NMR spectra showed that thermo-responsive diblock P(DMA- b -NIPAM) and cross-linked PTFEMA particles were successfully synthesized. Influence of the amount of ammonium persulfate (APS), the molar ratio of monomers to RAFT agent, influence of the amount of cross-linker on aqueous polymerization and thermo-responsive characterization of the particles are investigated. Monomer conversion increased from 44% to 94% with increasing the molar ratio of APS and P(DMA- b -NIPAM) from 1:9 to1:3. As the reaction proceeded, the particle size increased from 29 to 49 nm due to the consumption of TFEMA monomer. The size of cross-linked nanoparticles sharply decreased from 50.3 to 40.5 nm over the temperature range 14-44 °C, suggesting good temperature sensitivity for these nanoparticles.

Precursors and factors affecting formation of haloacetonitriles and chloropicrin during chlor(am)ination of nitrogenous organic compounds in drinking water.

PubMed

Jia, Aiyin; Wu, Chunde; Duan, Yan

2016-05-05

This study investigated the precursors and factors affecting formation of haloacetonitriles (HANs) and chloropicrin (TCNM) during chlorination/chloramination of eight amino acids in the effluent water of V-type clarifying filtration from a drinking water treatment plant. The yields of trichloroacetonitrile (TCAN), dichloroacetonitrile (DCAN) and TCNM were higher during chlorination than during chloramination. Tyrosine and tryptophan produced the greatest amount of DCAN and also generated a small amount of TCAN during chlorination process. Besides, the yields of DCAN were higher than TCNM during chlorination/chloramination. Contact time, Cl2:org-N molar ratios, pH, temperature and bromide ion affected nitrogenous disinfection by-products (N-DBPs) formation during chlorination of tryptophan in different degrees. TCAN, DCAN and TCNM formation showed the increasing and then decreasing with prolonged contact time. Higher Cl2:org-N molar ratios improved N-DBPs formation within a certain range. The pH affected N-DBPs formation differently. HANs increased with increasing pH from 5 to 6 and decreased with increasing pH from 6 to 9, while TCNM increased with increasing pH from 5 to 9. Higher temperatures enhanced TCNM formation, but reduced the formation of TCAN and DCAN. The presence of bromide ions improved the yields of HANs and TCNM and shifted N-DBPs to more brominated ones. Copyright © 2016 Elsevier B.V. All rights reserved.

Root canal preparation of mandibular molars with 3 nickel-titanium rotary instruments: a micro-computed tomographic study.

PubMed

Zhao, Dan; Shen, Ya; Peng, Bin; Haapasalo, Markus

2014-11-01

The aim of this study was to describe the canal shaping properties of ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Universal (PTU; Dentsply Tulsa Dental Specialties, Johnson City, TN), and WaveOne (Dentsply Maillefer) nickel-titanium instruments in mandibular first molars by using micro-computed tomographic (micro-CT) scanning. A total of 36 maxillary first molars with 2 separate mesial canals and 1 distal canal were selected and scanned preoperatively and postoperatively by using micro-CT scanning with a voxel size of 30 μm. Canals were prepared with PTU, PTN, and WaveOne systems under hypochlorite irrigation. The volume of the untreated canal; the volume of dentin removed after preparation; the amount of the uninstrumented area; and the transportation to the coronal, middle, and apical thirds of canals were measured. The preparation time and instrument failure were also recorded. Instrumentation of canals increased their volume and surface area. The distal canals had a significantly higher proportion of unprepared surfaces than mesial canals (P < .05). The PTN system produced less transportation than the WaveOne and PTU systems in the apical third of the mesial canals (P < .05). There was no significant difference on apical transportation in distal canals among the 3 instrument systems. Instrumentation with WaveOne was significantly faster than with the other 2 instruments (P < .05). The PTN, PTU, and WaveOne instruments shaped root canals in mandibular first molars in vitro without significant shaping errors. The curved canals prepared using PTN had less apical transportation than the canals prepared using WaveOne and PTU. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Biorhythms, deciduous enamel thickness, and primary bone growth: a test of the Havers-Halberg Oscillation hypothesis.

PubMed

Mahoney, Patrick; Miszkiewicz, Justyna J; Pitfield, Rosie; Schlecht, Stephen H; Deter, Chris; Guatelli-Steinberg, Debbie

2016-06-01

Across mammalian species, the periodicity with which enamel layers form (Retzius periodicity) in permanent teeth corresponds with average body mass and the pace of life history. According to the Havers-Halberg Oscillation hypothesis (HHO), Retzius periodicity (RP) is a manifestation of a biorhythm that is also expressed in lamellar bone. Potentially, these links provide a basis for investigating aspects of a species' biology from fossilized teeth. Here, we tested intra-specific predictions of this hypothesis on skeletal samples of human juveniles. We measured daily enamel growth increments to calculate RP in deciduous molars (n = 25). Correlations were sought between RP, molar average and relative enamel thickness (AET, RET), and the average amount of primary bone growth (n = 7) in humeri of age-matched juveniles. Results show a previously undescribed relationship between RP and enamel thickness. Reduced major axis regression reveals RP is significantly and positively correlated with AET and RET, and scales isometrically. The direction of the correlation was opposite to HHO predictions as currently understood for human adults. Juveniles with higher RPs and thicker enamel had increased primary bone formation, which suggests a coordinating biorhythm. However, the direction of the correspondence was, again, opposite to predictions. Next, we compared RP from deciduous molars with new data for permanent molars, and with previously published values. The lowermost RP of 4 and 5 days in deciduous enamel extends below the lowermost RP of 6 days in permanent enamel. A lowered range of RP values in deciduous enamel implies that the underlying biorhythm might change with age. Our results develop the intra-specific HHO hypothesis. © 2016 Anatomical Society.

Plutonium and uranium determination in environmental samples: combined solvent extraction-liquid scintillation method.

PubMed

McDowell, W J; Farrar, D T; Billings, M R

1974-12-01

A method for the determination of uranium and plutonium by a combined high-resolution liquid scintillation-solvent extraction method is presented. Assuming a sample count equal to background count to be the detection limit, the lower detection limit for these and other alpha-emitting nuclides is 1.0 dpm with a Pyrex sample tube, 0.3 dpm with a quartz sample tube using present detector shielding or 0.02 d.p.m. with pulse-shape discrimination. Alpha-counting efficiency is 100%. With the counting data presented as an alpha-energy spectrum, an energy resolution of 0.2-0.3 MeV peak half-width and an energy identification to +/-0.1 MeV are possible. Thus, within these limits, identification and quantitative determination of a specific alpha-emitter, independent of chemical separation, are possible. The separation procedure allows greater than 98% recovery of uranium and plutonium from solution containing large amounts of iron and other interfering substances. In most cases uranium, even when present in 10(8)-fold molar ratio, may be quantitatively separated from plutonium without loss of the plutonium. Potential applications of this general analytical concept to other alpha-counting problems are noted. Special problems associated with the determination of plutonium in soil and water samples are discussed. Results of tests to determine the pulse-height and energy-resolution characteristics of several scintillators are presented. Construction of the high-resolution liquid scintillation detector is described.

Thermoregulation of dancing bees: thoracic temperature of pollen and nectar foragers in relation to profitability of foraging and colony need.

PubMed

Stabentheiner, A

2001-04-01

The thorax surface temperature of dancing honeybees (Apis mellifera carnica) recruiting nestmates to natural sources of nectar and pollen around Graz (Austria) was measured by real-time infrared thermography without touching them or disturbing social interactions. Thorax temperature during dancing was quite variable (31.4-43 degrees C). In the course of a foraging season it varied considerably and was always lower than in bees foraging from a highly profitable food source (2 molar sucrose 120 m from the hive). It averaged 38.0 degrees C (SD=2.24, n=224 dances) in the nectar foragers and 37.4 degrees C (SD=1.64, n=171) in the pollen foragers, resembling that of dancers foraging 0.5 molar sucrose from feeders with unlimited flow. Hive air temperature accounted only for about 3-8% of total variation. Foraging distance modulated dancing temperature in a way that, according to the decrease of the profitability of foraging with distance, maximum temperatures decreased and, in accordance with the increase of the dancing threshold with distance, minumum temperatures increased with distance, this way providing new support for the hypothesis that the dancing temperature is modulated by the profitability of foraging and the dancing and foraging motivation of the bees. Dancing temperature of both nectar and pollen dancers correlated with several parameters of the hive status, increasing with the amount of brood and decreasing with the amount of honey and pollen. These correlations are discussed with respect to literature reports on a colony's need for pollen and nectar, in particular the effect of brood and the amount of pollen on pollen foraging, and the effect of honey stores and demand for nectar on nectar foraging.

Prevalence of missing and impacted third molars in adults aged 25 years and above

PubMed Central

Jung, Yun-Hoa

2013-01-01

Purpose The purpose of this study was to determine the prevalence of missing and impacted third molars in people aged 25 years and above. Materials and Methods The study sample of 3,799 patients was chosen randomly from patients who visited Pusan National University Dental Hospital and had panoramic radiographs taken. The data collected included presence and impaction state, angulation, and depth of impaction of third molars, and radiographically detected lesions of third molars and adjacent second molars. Results A greater percentage of men than women retained at least one third molar. The incidence of third molars decreased with increasing age. The incidence of partially impacted third molars greatly declined after the age of 30. Vertically impacted maxillary third molars and horizontally impacted mandibular third molars were most frequent in all age groups. Among the maxillary third molars, those impacted below the cervical line of the second molar were most frequent in all age groups, and among the mandibular third molars, deeply impacted third molars were most frequent in those aged over 40. Dental caries was the most common radiographic lesion of the third molars. Mesioangularly impacted third molars showed radiographic lesions in 13 (9.5%) adjacent maxillary second molars and 117 (27.4%) mandibular second molars. Conclusion The number of remaining third molars decreased and the percentage of Class C depth increased with age. Caries was the most frequent lesion in third molars. Partially impacted mesioangular third molars showed a high incidence of caries or periodontal bone loss of the adjacent second molar. Regular oral examination will be essential to keep asymptomatic third molars in good health. PMID:24380060

5 CFR 2610.308 - Decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Administrative Personnel OFFICE OF GOVERNMENT ETHICS ORGANIZATION AND PROCEDURES IMPLEMENTATION OF THE EQUAL... officer shall issue an initial decision on the application within 30 days after completion of proceedings... amount requested and the amount awarded. The decision shall also include, if at issue, findings on...

26 CFR 1.79-1 - Group-term life insurance-general rules.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the employee's income is equal to: (D+C)−(PI+DI+AP) where D is the total amount of dividends actually...: PI is the total amount of premium included in the employee's income under paragraph (d)(1) of this...

13 CFR 107.1160 - Maximum amount of Leverage for a Section 301(d) Licensee.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Leverage, you must maintain Venture Capital Financings (at cost) that equal at least 30 percent of your... maintain at least the same dollar amount of Venture Capital Financings (at cost). (e) Definition of “Total... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Maximum amount of Leverage for a...

26 CFR 1.468A-8T - Special transfers to qualified funds pursuant to section 468A(f) (temporary).

Code of Federal Regulations, 2010 CFR

2010-04-01

... amount of cash and the fair market value of property transferred) may not exceed the present value of the... (see paragraph (c) of this section). (2) Pre-2005 nonqualifying amount. The present value of the pre... amount equal to the pre-2005 nonqualifying percentage of the present value of the estimated future...

Relationship Between Third Mandibular Molar Angulation and Distal Cervical Caries in the Second Molar.

PubMed

Claudia, Andreescu; Barbu, Horia Mihail; Adi, Lorean; Gultekin, Alper; Reiser, Vadim; Gultekin, Pinar; Mijiritsky, Eitan

2018-03-16

Third lower molar partially erupted is commonly encountered in dental practice. This situation challenges clinicians with the dilemma whether to remove or to monitor it, because this molar can cause pathology of the adjacent second molar. The aim of this retrospective study is to evaluate the relationship between third mandibular molar and distal cervical caries in second molar. This retrospective study analyzed 55 digital orthopantograms of adult patients and a total number of 95 mandibular third molars were assessed for eruption status, angulation, radiographic evidence of caries or restoration in the mandibular third molar, and radiographic evidence of caries or restoration in the distal surface of the mandibular second molar. The distal cervical caries in second molar is associated with fully erupted and partially erupted wisdom molar in horizontal, mesioangular and vertical position and less with presence of caries in third molar. There are caries lesions in distal second molars in mesioangular position when adjacent third molar is caries free.

Saving the 2(nd) Molar from the 3(rd) Is it Really the Guilt of the Tilt?

PubMed

Yadav, Pankaj; Pruthi, Preeti Jain; Nawal, Ruchika Roongta; Talwar, Sangeeta; Verma, Mahesh

2016-05-01

Clinicians often relate the distal caries in second molars to angulated third molars, which if left undetected can lead to gross decay that may further require removal of the tooth. Due to this fact, many third molars are advised for prophylactic removal to prevent decay in the second molar. But this approach would only be justified when the incidence of decay/loss of second molar due to third molar are reasonably high. We sought to determine incidence of caries experience and also sequel extraction in second molars associated with the third molars. The study was conducted to answer the basic question that whether the incidence of caries and subsequent extraction of second molar due to angulated third molars is high enough to justify the prophylactic removal of third molar or not. This study was conducted on radiographic records of 1187 patients. The effect of tilted third molar on the second molar was measured in relation with three parameters namely level & position of third molar with respect to second molar and the distribution among arches. The results indicated that out of total number of teeth examined only 5.4% of maxillary and 9.6% of mandibular second molars were affected by tilted third molars. Further, only 2.2% of mandibular and 2.9% of maxillary second molars were indicated for extraction. The data was statistically insignificant. It was concluded that distal caries in second molars is not very common. It may be present in some cases of third molar impactions and prophylactic removal of these impacted teeth may not be considered appropriate.

Morphologic study of the maxillary molars. Part II: Internal anatomy.

PubMed

Pécora, J D; Woelfel, J B; Sousa Neto, M D; Issa, E P

1992-01-01

The internal anatomy of three hundred and seventy (370) decalcified and cleared human maxillary molars was studied. Seventy-five percent of the first molars, 58% of the second molars and 68% of the third molars studied presented three (3) root canals and 25% of the first molars, 42% of the second molars and 32% of the third molars presented four (4) root canals. The authors observed that the incidence of two root canals in the mesiobuccal root was higher in second maxillary molars than in first maxillary molars.

Evaluation of apically extruded debris during root canal preparation in primary molar teeth using three different rotary systems and hand files.

PubMed

Topçuoğlu, Gamze; Topçuoğlu, Hüseyin Sinan; Akpek, Firdevs

2016-09-01

To assess the amount of debris extruded apically during root canal preparation using various nickel titanium instrumentation systems and hand files in primary molar teeth. Sixty extracted primary first mandibular molar human teeth were randomly assigned to four groups (n = 15 teeth for each group). The canals were then instrumented with the following instrument systems: Revo-S, Mtwo, ProTaper Next, and hand files. Apically extruded debris during instrumentation was collected into pre-weighed Eppendorf tubes. The Eppendorf tubes were then stored in an incubator at 70°C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. The data were analyzed using one-way analysis of variance (anova) and Tukey's post hoc tests. ProTaper Next files were associated with less apically extruded debris than the Mtwo, Revo-S, and hand files (P < 0.05). Hand files extruded more debris than Mtwo and Revo-S instruments (P < 0.05), but there was no significant difference found between the Mtwo and Revo-S instruments (P > 0.05). All instruments were associated with apical extrusion of debris. ProTaper Next files caused less debris extrusion compared to the other systems used. © 2015 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Polysaccharides from Sargassum thunbergii: Monthly variations and anti-complement and anti-tumour activities.

PubMed

Jin, Weihua; Liu, Ge; Zhong, Weihong; Sun, Chaomin; Zhang, Quanbin

2017-12-01

Monthly variations of polysaccharides from Sargassum thunbergii and their anti-complement and anti-tumour activities were investigated. It was observed that an increase in fucose and total sugar contents occurred during the growth period (from early April to mid-June), accompanied by a decrease in molar ratios of other monosaccharides to fucose. The highest yields were obtained from early July to early September, which was in accordance with the significant increase in molar ratio of glucose to fucose and decrease in molar ratio of other monosaccharides to fucose. And the above results suggested that S. Thunbergii synthesized large amount of laminaran, the storage substance of brown algae, during the senescence period. However, sulfate contents were relatively stable in the life cycle of S. thunbergii. These results suggested that S. thunbergii synthesized complex sulfated heteropolysacchairdes during inactive period, while during other periods, it synthesized more sulfated galactofucan. All polysaccharides showed anti-complement activity, suggesting that the harvesting time did not influence the anti-complement activities. In the anti-tumour assay in vitro, the polysaccharides taken during the senescence period had much lower anti-tumour activity, suggesting that fucoidan, but not laminaran, determined the anti-tumour activities. Therefore, polysaccharides from S. thunbergii might have great potential in anti-complement and anti-tumour application. Copyright © 2017 Elsevier B.V. All rights reserved.

The effects of local administration of Zoledronate solution on the tooth movement and periodontal ligament.

PubMed

Liu, Chang; Sun, Xinhua; Chen, Yuanping; Hu, Min; Liang, Tang

2002-07-01

To investigate the effects of local administration of Zoledronate solution on the tooth movement and periodontal ligament. Orthodontic tooth movement of upper first molar was performed in 42 rats with coil spring. Zoledronate solution was injected into the palatal submucosal area adjacent to the left upper first molar in experimental group 3 days prior to the use of the appliance. In control group, same amount of 0.9% NaCl solution was injected into the palatal submucosal area adjacent to the left and right upper first molar. The injection was applied every third day. The application of mesial force lasted 0.3, 7, 14, 21 days respectively. After the rats were sacrificed, the distance of tooth movement was measured. Sections were stained and then observed with microscope. 1. The distance of tooth movement in the experimental group was significantly smaller than that in the control group. 2. The number of osteoclast on the pressure side in the experiment group was significantly smaller than that in the control group through the experimental period, but there was no distinct difference between experimental group and control group (except for 14 days) for the number of odontoclast in interradicular area. 3. The osteoclasts and odontoclasts were the main target cell of Zoledronate in periodontal tissue. Zoledronate may be a useful agent for anchorage control and reducing the number of osteoclast on pressure side of alveolar bone.

Sucralose as co-crystal co-former for hydrochlorothiazide: development of oral disintegrating tablets.

PubMed

Arafa, Mona F; El-Gizawy, Sanaa A; Osman, Mohamed A; El Maghraby, Gamal M

2016-08-01

Development of oral disintegrating tablets requires enhancement of drug dissolution and selection of sweetener. Co-crystallization of drugs with inert co-former is an emerging technique for enhancing dissolution rate. The benefit of this technique will become even greater if one of the sweeteners can act as co-crystal co-former to enhance dissolution and mask the taste. Accordingly, the objective of this work was to investigate the efficacy of sucralose as a potential co-crystal co-former for enhancing the dissolution rate of hydrochlorothiazide. This was extended to prepare oral disintegrating tablets. Co-crystallization was achieved after dissolving hydrochlorothiazide with increasing molar ratios of sucralose in the least amount of acetone. The co-crystallization products were characterized using Fourier transform infrared spectroscopy, differential thermal analysis and powder X-ray diffraction. These measurements indicated that co-crystallization process started at a drug sucralose molar ratio of 1:1 and completed at 1:2. The developed co-crystals exhibited faster drug dissolution compared with the control, with co-crystal containing the drug with sucralose at 1:2 molar ratio being optimum. The later was used to prepare fast disintegrating tablets. These tablets had acceptable physical characteristics and showed fast disintegration with subsequent rapid dissolution. The study introduced sucralose as co-crystal co-former for enhanced dissolution and masking the taste.

Distribution of GD3 in DPPC Monolayers: A Thermodynamic and Atomic Force Microscopy Combined Study

PubMed Central

Diociaiuti, Marco; Ruspantini, Irene; Giordani, Cristiano; Bordi, Federico; Chistolini, Pietro

2004-01-01

Gangliosides are the main component of lipid rafts. These microdomains, floating in the outer leaflet of cellular membrane, play a key role in fundamental cellular functions. Little is still known about ganglioside and phospholipid interaction. We studied mixtures of dipalmitoylphosphatidylcholine and GD3 (molar fraction of 0.2, 0.4, 0.6, 0.8) using complementary techniques: 1), thermodynamic properties of the Langmuir-Blodgett films were assessed at the air-water interface (surface tension, surface potential); and 2), three-dimensional morphology of deposited films on mica substrates were imaged by atomic force microscopy. Mixture thermodynamics were consistent with data in the literature. In particular, excess free energy was negative at each molar fraction, thus ruling out GD3 segregation. Atomic force microscopy showed that the height of liquid-condensed domains in deposited films varied with GD3 molar fraction, as compatible with a lipid aggregation model proposed by Maggio. No distinct GD3-rich domain was observed inside the films, suggesting that GD3 molecules gradually mix with dipalmitoylphosphatidylcholine molecules, confirming ΔG data. Morphological analysis revealed that the shape of liquid-condensed domains is strongly influenced by the amount of GD3, and an interesting stripe-formation phenomenon was observed. These data were combined with the thermodynamic results and interpreted in the light of McConnell's model. PMID:14695273

Treatment of hazardous waste landfill leachate using Fenton oxidation process

NASA Astrophysics Data System (ADS)

Singa, Pradeep Kumar; Hasnain Isa, Mohamed; Ho, Yeek-Chia; Lim, Jun-Wei

2018-03-01

The efficiency of Fenton's oxidation was assessed in this study for hazardous waste landfill leachate treatment. The two major reagents, which are generally employed in Fenton's process are H2O2 as oxidizing agent and Fe2+ as catalyst. Batch experiments were conducted to determine the effect of experimental conditions viz., reaction time, molar ratio, and Fenton reagent dosages, which are significant parameters that influence the degradation efficiencies of Fenton process were examined. It was found that under the favorable experimental conditions, maximum COD removal was 56.49%. The optimum experimental conditions were pH=3, H2O2/Fe2+ molar ratio = 3 and reaction time = 150 minutes. The optimal amount of hydrogen peroxide and iron were 0.12 mol/L and 0.04 mol/L respectively. High dosages of H2O2 and iron resulted in scavenging effects on OH• radicals and lowered degradation efficiency of organic compounds in the hazardous waste landfill leachate.

Method for treating materials for solidification

DOEpatents

Jantzen, Carol M.; Pickett, John B.; Martin, Hollis L.

1995-01-01

A method for treating materials such as wastes for solidification to form a solid, substantially nonleachable product. Addition of reactive silica rather than ordinary silica to the material when bringing the initial molar ratio of its silica constituent to a desired ratio within a preselected range increases the solubility and retention of the materials in the solidified matrix. Materials include hazardous, radioactive, mixed, and heavy metal species. Amounts of other constituents of the material, in addition to its silica content are also added so that the molar ratio of each of these constituents is within the preselected ranges for the final solidified product. The mixture is then solidified by cement solidification or vitrification. The method can be used to treat a variety of wastes, including but not limited to spent filter aids from waste water treatment, waste sludges, combinations of spent filter aids and waste sludges, combinations of supernate and waste sludges, incinerator ash, incinerator offgas blowdown, combinations of incinerator ash and offgas blowdown, cementitious wastes and contaminated soils.

Introductory Chemistry: A Molar Relaxivity Experiment in the High School Classroom.

PubMed

Dawsey, Anna C; Hathaway, Kathryn L; Kim, Susie; Williams, Travis J

2013-07-09

Dotarem and Magnevist, two clinically available magnetic resonance imaging (MRI) contrast agents, were assessed in a high school science classroom with respect to which is the better contrast agent. Magnevist, the more efficacious contrast agent, has negative side effects because its gadolinium center can escape from its ligand. However, Dotarem, though a less efficacious contrast agent, is a safer drug choice. After the experiment, students are confronted with the FDA warning on Magnevist, which enabled a discussion of drug efficacy versus safety. We describe a laboratory experiment in which NMR spin lattice relaxation rate measurements are used to quantify the relaxivities of the active ingredients of Dotarem and Magnevist. The spin lattice relaxation rate gives the average amount of time it takes the excited nucleus to relax back to the original state. Students learn by constructing molar relaxivity curves based on inversion recovery data sets that Magnevist is more relaxive than Dotarem. This experiment is suitable for any analytical chemistry laboratory with access to NMR.

Urea controlled hydrothermal synthesis of ammonium aluminum carbonate hydroxide rods

NASA Astrophysics Data System (ADS)

Wang, Fang; Zhu, Jianfeng; Liu, Hui

2018-03-01

In this study, ammonium aluminum carbonate hydroxide (AACH) rods were controllably prepared using the hydrothermal method by manipulating the amount of urea in the reaction system. The experimental results showed that AACH in rod shape was able to be gradually transformed from γ-AlOOH in cluster shape during the molar ratios of urea to Al in the reactants were ranged from 8 to 10, and the yield of AACH has increased accordingly. When the molar ratio of urea to Al reaches 11, pure AACH rods with a diameter of 500 nm and a length of 10 μm approximately was able to be produced. Due to the slow decomposition of urea during the hydrothermal reaction, the nucleation and growth of AACH crystal proceed step by step. Therefore, the crystal can fully grow on each crystal plane and eventually produce a highly crystalline rod-shaped product. The role of urea in controlling the morphology and yield of AACH was also discussed in this paper systematically.

Enzymatic synthesis of eugenol benzoate by immobilized Staphylococcus aureus lipase: optimization using response surface methodology and determination of antioxidant activity.

PubMed

Horchani, Habib; Ben Salem, Nadia; Zarai, Zied; Sayari, Adel; Gargouri, Youssef; Chaâbouni, Moncef

2010-04-01

The ability of a non-commercial immobilized Staphylococcus aureus lipase to catalyze the esterification of eugenol with benzoic acid was checked and the antioxidant power of the ester formed was evaluated. Response surface methodology based on four variables (the reaction temperature, the amount of lipase, the benzoic acid/eugenol molar ratio and the volume of solvent) was used to optimize the experimental conditions of eugenol benzoate synthesis. The maximum conversion yield (75%) was obtained using 240 IU of immobilized lipase, a benzoic acid/eugenol molar ratio of 1.22 dissolved in 4.6 ml chloroform at 41 degrees Celsius. The antioxidant activities of eugenol and its ester were evaluated. Compared to BHT, used as a model synthetic antioxidant, the eugenol benzoate showed a higher antioxidative activity. The IC(50) value for 1,1-diphenyl-2-picrylhydrazyl was found to be 18.2 microg/ml versus 20.2 microg/ml for eugenol and eugenol benzoate. Copyright 2009 Elsevier Ltd. All rights reserved.

24 CFR 570.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... means the amount of funds which a metropolitan city is entitled to receive under the Entitlement grant... person means a member of a family having an income equal to or less than the Section 8 low-income limit...-income household means a household having an income equal to or less than the Section 8 very low-income...

75 FR 17622 - Equal Access to Justice Act Implementation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... enforceable by the Director of FHFA until such regulations are modified, terminated, set aside, or superseded by the Director of FHFA.\\2\\ \\2\\ See section 1302 and section 1312 of HERA. B. Equal Access to Justice... demand for a lesser amount. Director would be defined as the Director of the Federal Housing Finance...

9 CFR 201.42 - Custodial accounts for trust funds.

Code of Federal Regulations, 2013 CFR

2013-01-01

... equal to the proceeds receivable from the sale of livestock that are due from (i) the market agency, (ii... following the sale of livestock, deposit an amount equal to all the remaining proceeds receivable whether or... fiduciary capacity as trustee of the custodial funds. (Approved by the Office of Management and Budget under...

9 CFR 201.42 - Custodial accounts for trust funds.

Code of Federal Regulations, 2011 CFR

2011-01-01

... equal to the proceeds receivable from the sale of livestock that are due from (i) the market agency, (ii... following the sale of livestock, deposit an amount equal to all the remaining proceeds receivable whether or... fiduciary capacity as trustee of the custodial funds. (Approved by the Office of Management and Budget under...

9 CFR 201.42 - Custodial accounts for trust funds.

Code of Federal Regulations, 2012 CFR

2012-01-01

... equal to the proceeds receivable from the sale of livestock that are due from (i) the market agency, (ii... following the sale of livestock, deposit an amount equal to all the remaining proceeds receivable whether or... fiduciary capacity as trustee of the custodial funds. (Approved by the Office of Management and Budget under...

9 CFR 201.42 - Custodial accounts for trust funds.

Code of Federal Regulations, 2014 CFR

2014-01-01

... equal to the proceeds receivable from the sale of livestock that are due from (i) the market agency, (ii... following the sale of livestock, deposit an amount equal to all the remaining proceeds receivable whether or... fiduciary capacity as trustee of the custodial funds. (Approved by the Office of Management and Budget under...

38 CFR 3.271 - Computation of income.

Code of Federal Regulations, 2012 CFR

2012-07-01

... income. Recurring income means income which is received or anticipated in equal amounts and at regular... computation purposes. (2) Irregular income. Irregular income means income which is received or anticipated during a 12-month annualization period, but which is received in unequal amounts or at irregular...

Method of producing a diesel fuel blend having a pre-determined flash-point and pre-determined increase in cetane number

DOEpatents

Waller, Francis Joseph; Quinn, Robert

2004-07-06

The present invention relates to a method of producing a diesel fuel blend having a pre-determined flash-point and a pre-determined increase in cetane number over the stock diesel fuel. Upon establishing the desired flash-point and increase in cetane number, an amount of a first oxygenate with a flash-point less than the flash-point of the stock diesel fuel and a cetane number equal to or greater than the cetane number of the stock diesel fuel is added to the stock diesel fuel in an amount sufficient to achieve the pre-determined increase in cetane number. Thereafter, an amount of a second oxygenate with a flash-point equal to or greater than the flash-point of the stock diesel fuel and a cetane number greater than the cetane number of the stock diesel fuel is added to the stock diesel fuel in an amount sufficient to achieve the pre-determined increase in cetane number.

Saving the 2nd Molar from the 3rd Is it Really the Guilt of the Tilt?

PubMed Central

Yadav, Pankaj; Nawal, Ruchika Roongta; Talwar, Sangeeta; Verma, Mahesh

2016-01-01

Introduction Clinicians often relate the distal caries in second molars to angulated third molars, which if left undetected can lead to gross decay that may further require removal of the tooth. Due to this fact, many third molars are advised for prophylactic removal to prevent decay in the second molar. But this approach would only be justified when the incidence of decay/loss of second molar due to third molar are reasonably high. We sought to determine incidence of caries experience and also sequel extraction in second molars associated with the third molars. Aim The study was conducted to answer the basic question that whether the incidence of caries and subsequent extraction of second molar due to angulated third molars is high enough to justify the prophylactic removal of third molar or not. Materials and Methods This study was conducted on radiographic records of 1187 patients. The effect of tilted third molar on the second molar was measured in relation with three parameters namely level & position of third molar with respect to second molar and the distribution among arches. Results The results indicated that out of total number of teeth examined only 5.4% of maxillary and 9.6% of mandibular second molars were affected by tilted third molars. Further, only 2.2% of mandibular and 2.9% of maxillary second molars were indicated for extraction. The data was statistically insignificant. Conclusion It was concluded that distal caries in second molars is not very common. It may be present in some cases of third molar impactions and prophylactic removal of these impacted teeth may not be considered appropriate. PMID:27437353

N-vinylpyrrolidone modified glass-ionomer resins for improved dental restoratives

NASA Astrophysics Data System (ADS)

Xie, Dong

The studies described in this dissertation focus on improvement of mechanical properties of current glass-ionomer cements. Thermal properties and microstructures of the cements were correlated with their mechanical strengths. The first study evaluated mechanical properties of selected commercial glass-ionomer cements and examined their microstructures. The results showed that resin-modified glass-ionomer cements (RM GICs) exhibited much higher flexural (FS) and diametral tensile strengths (DTS), compared to conventional GICs (C GICs). In addition, they exhibited comparable compressive strength (CS), relatively low microhardness and less wear resistance than C GICs. The C GICs exhibited brittle behavior, whereas the RM GICs underwent substantial plastic deformation in compression. The mechanical properties of the GICs were closely related to their microstructures. Factors such as the density of the microstructure, the integrity of the interface between the glass particles and polymer matrix, particle size and the number and size of voids have important roles in determining the mechanical properties. The second study evaluated thermal properties of these GICs. The results showed that the RM GICs exhibited higher thermal transition temperatures than those of the C GICs, thermal expansion coefficients of these cements were close to those of human teeth, and the indentation creep of the RM GICs were higher than the C GICs. The third study explored and evaluated the effect of a water-soluble monomer, N-vinylpyrrolidone (NVP), on the performance of current C GICs, indicating a significant improvement in both mechanical and working properties. The fourth study demonstrated the process of determining the optimal molar ratio of the NVP-containing copolymers, using design of experiment. The results showed that the optimal molar ratio for these copolymers was 7:1:3 for poly(acrylic acid-co-itaconic acid-co-N-vinylpyrrolidone), based on the FS test. The molar ratio of 8:2:1 (AA:IA:NVP) was considered as the best molar ratio for these copolymers, based on the DTS and CS tests. The fifth study formulated the NVP-containing RM GICs using a statistical design of experiment. The results indicated that the best graft ratio for 2-isocyanatoethyl methacrylate (IEM) in this system was 15% of the terpolymer by a molar ratio. The optimal formulation was found to be at the weight ratio of 55:15:30 (RM NVP-containing terpolymer: 2-hydroxyethyl methacrylate (HEMA): Hsb2O). Stress-strain curves showed that a relatively high amount of water in the formulation led to higher elastic modulus and proportional limit and lower malleability, whereas a relatively high amount of HEMA gave the opposite results. The sixth study evaluated the NVP modified GICs (NVPM GICs) with the best molar ratios and optimal formulations in the mechanical, thermal and working properties. The results showed that the effect of molecular weight on mechanical properties of the NVPM GICs were evident. Different glass powders exhibited different effects on properties of the NVPM GICs, due to different compositions, size and affinity. Powder/liquid ratios had significant effects on the mechanical properties of NVPM GICs, especially on FS. P/W ratios are only beneficial to the NVPM GICs mixed with the Fuji II glass powders. The NVPM GICs showed a higher WT than the models, due to water retention of the NVP ring. Thermal expansion coefficients for the NVPM GICs were close to those for the natural tooth. Mismatch between the glass powders used and the polymer matrix was a big concern in this study and should be solved in the future.

Human age estimation combining third molar and skeletal development.

PubMed

Thevissen, P W; Kaur, J; Willems, G

2012-03-01

The wide prediction intervals obtained with age estimation methods based on third molar development could be reduced by combining these dental observations with age-related skeletal information. Therefore, on cephalometric radiographs, the most accurate age-estimating skeletal variable and related registration method were searched and added to a regression model, with age as response and third molar stages as explanatory variable. In a pilot set up on a dataset of 496 (283 M; 213 F) cephalometric radiographs, the techniques of Baccetti et al. (2005) (BA), Seedat et al. (2005) (SE), Caldas et al. (2007) and Rai et al. (2008) (RA) were verified. In the main study, data from 460 (208 F, 224 M) individuals in an age range between 3 and 26 years, for which at the same day an orthopantogram and a cephalogram were taken, were collected. On the orthopantomograms, the left third molar development was registered using the scoring system described by Gleiser and Hunt (1955) and modified by Köhler (1994) (GH). On the cephalograms, cervical vertebrae development was registered according to the BA and SE techniques. A regression model, with age as response and the GH scores as explanatory variable, was fitted to the data. Next, information of BA, SE and BA + SE was, respectively, added to this model. From all obtained models, the determination coefficients and the root mean squared errors were calculated. Inclusion of information from cephalograms based on the BA, as well as the SE, technique improved the amount of explained variance in age acquired from panoramic radiographs using the GH technique with 48%. Inclusion of cephalometric BA + SE information marginally improved the previous result (+1%). The RMSE decreased with 1.93, 1.85 and 2.03 years by adding, respectively, BA, SE and BA + SE information to the GH model. The SE technique allows clinically the fastest and easiest registration of the degree of development of the cervical vertebrae. Therefore, the choice of technique to classify cervical vertebrae development in addition to third molar development is preferably the SE technique.

[Comparison of treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods: a three-dimensional model study].

PubMed

Ning, Ma; Weiran, Li

2015-02-01

This study aims to compare the treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods via three-dimensional model measurement. A total of 46 patients with maxillary dentoalveolar protrusion treated with bilateral maxillary first premolar extractions and high anchorage were selected. The subjects were randomly divided into three groups according to the type of anchorage applied, which included implant, extraoral, and Nance arch anchorages. The maxillary dental models were made before treatment and after space closure of maxilla. The movements of the maxillary central incisors and first molars were measured via a three-dimensional model measurement, and the amounts of movement were compared among the three groups. The sagittal lingual movements of the maxillary central incisors were (-6.661 ± 1.328), (-5.939 ± 1.806), and (-5.788 ± 2.009) mm for the implant, extraoral, and Nance arch anchorage groups, respectively, with no significant difference among the three groups (P = 0.121). The corresponding vertical movements of the maxillary central incisors were (0.129 ± 1.815) mm intrusion, and (-2.162 ± 2.026), (-2.623 ± 1.776) mm extrusion. Significant difference was found between the implant anchorage group and the other groups (P < 0.05). The corresponding sagittal mesial movements of the maxillary first molars were (0.608 ± 1.045), (1.445 ± 1.462), and (1.503 ± 0.945) mm. The corresponding vertical movements of the maxillary first molars were (0.720 ± 0.805) mm intrusion, (0.076 ± 0.986) mm intrusion, and (-0.072 ± 0.690) mm extrusion. Significant difference was found between the implant anchorage group and the other two groups (P < 0.05). In the transverse direction, the first molars all moved lingually with no significant difference among the three groups (P > 0.05). Implant anchorage may be superior in the vertical control of the maxillary incisors and in the sagittal, as well as in the vertical control of the maxillary molars, compared with the traditional anchorages during the treatment of patients with maxillary dentoalveolar protrusion.

Quantitative and qualitative assessment of anchorage loss during en-masse retraction with indirectly loaded miniscrews in patients with bimaxillary protrusion.

PubMed

Monga, Nitika; Kharbanda, Om Prakash; Samrit, Vilas

2016-08-01

This study provides vital insight in assessing anchorage loss when miniscrews are indirectly loaded. The study sample comprised 18 patients with bimaxillary protrusion (14 girls, 4 boys; mean age, 17.3 ± 4.6 years) selected from a database of 89 patients treated with miniscrews. All subjects who were selected required extraction of all first premolars and maximum anchorage. After initial leveling and aligning, miniscrews were placed between the first molar and the second premolar in all 4 quadrants and loaded by the indirect method at 3 weeks after placement with 200-g nickel-titanium alloy closed-coil springs for en-masse retraction. Mean treatment duration was 29.7 ± 6.8 months. Pretreatment and posttreatment lateral cephalograms were analyzed to measure the amount of anchorage loss, incisor retraction, and the incisors' angular change in reference to the pterygoid vertical reference line and were evaluated by the structural superimposition method. The ratio of incisor retraction to molar protraction was 4.2 in the maxilla and 4.7 in the mandible. The first molars showed mean extrusion of 0.20 mm in the maxilla and 0.57 mm in the mandible; these were statistically insignificant. The mean angular change of the first molars was -2.43° in the maxilla and -0.03° in the mandible. The mean anchorage loss in reference to the pterygoid vertical was 1.3 mm in the maxilla and 1.1 mm in the mandible; these were statistically significant. Structural superimpositions showed mean change in molar position of 0.83 mm in the maxilla and 0.87 mm in the mandible, and 5.77 mm in the maxillary incisor and 5.43 mm in the mandibular incisor. These results were compared with the direct anchorage method reported in the literature. Indirect miniscrew anchorage can be a viable alternative to direct anchorage. Copyright © 2016. Published by Elsevier Inc.

Redirection of Metabolic Hydrogen by Inhibiting Methanogenesis in the Rumen Simulation Technique (RUSITEC)

PubMed Central

Guyader, Jessie; Ungerfeld, Emilio M.; Beauchemin, Karen A.

2017-01-01

A decrease in methanogenesis is expected to improve ruminant performance by allocating rumen metabolic hydrogen ([2H]) to more energy-rendering fermentation pathways for the animal. However, decreases in methane (CH4) emissions of up to 30% are not always linked with greater performance. Therefore, the aim of this study was to understand the fate of [2H] when CH4 production in the rumen is inhibited by known methanogenesis inhibitors (nitrate, NIT; 3-nitrooxypropanol, NOP; anthraquinone, AQ) in comparison with a control treatment (CON) with the Rumen Simulation Technique (RUSITEC). Measurements started after 1 week adaptation. Substrate disappearance was not modified by methanogenesis inhibitors. Nitrate mostly seemed to decrease [2H] availability by acting as an electron acceptor competing with methanogenesis. As a consequence, NIT decreased CH4 production (−75%), dissolved dihydrogen (H2) concentration (−30%) and the percentages of reduced volatile fatty acids (butyrate, isobutyrate, valerate, isovalerate, caproate and heptanoate) except propionate, but increased acetate molar percentage, ethanol concentration and the efficiency of microbial nitrogen synthesis (+14%) without affecting gaseous H2. Nitrooxypropanol decreased methanogenesis (−75%) while increasing both gaseous and dissolved H2 concentrations (+81% and +24%, respectively). Moreover, NOP decreased acetate and isovalerate molar percentages and increased butyrate, valerate, caproate and heptanoate molar percentages as well as n-propanol and ammonium concentrations. Methanogenesis inhibition with AQ (−26%) was associated with higher gaseous H2 production (+70%) but lower dissolved H2 concentration (−76%), evidencing a lack of relationship between the two H2 forms. Anthraquinone increased ammonium concentration, caproate and heptanoate molar percentages but decreased acetate and isobutyrate molar percentages, total microbial nitrogen production and efficiency of microbial protein synthesis (−16%). Overall, NOP and AQ increased the amount of reduced volatile fatty acids, but part of [2H] spared from methanogenesis was lost as gaseous H2. Finally, [2H] recovery was similar among CON, NOP and AQ but was largely lower than 100%. Consequently, further studies are required to discover other so far unidentified [2H] sinks for a better understanding of the metabolic pathways involved in [2H] production and utilization. PMID:28352256

Solid solution barium–strontium chlorides with tunable ammonia desorption properties and superior storage capacity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bialy, Agata; Jensen, Peter B.; Center for Atomic-scale Materials Design, Department of Physics, Technical University of Denmark, Fysikvej 311, DK-2800 Kgs. Lyngby

Metal halide ammines are very attractive materials for ammonia absorption and storage—applications where the practically accessible or usable gravimetric and volumetric storage densities are of critical importance. Here we present, that by combining advanced computational materials prediction with spray drying and in situ thermogravimetric and structural characterization, we synthesize a range of new, stable barium-strontium chloride solid solutions with superior ammonia storage densities. By tuning the barium/strontium ratio, different crystallographic phases and compositions can be obtained with different ammonia ab- and desorption properties. In particular it is shown, that in the molar range of 35–50% barium and 65–50% strontium, stablemore » materials can be produced with a practically usable ammonia density (both volumetric and gravimetric) that is higher than any of the pure metal halides, and with a practically accessible volumetric ammonia densities in excess of 99% of liquid ammonia. - Graphical abstract: Thermal desorption curves of ammonia from Ba{sub x}Sr{sub (1−x)}Cl{sub 2} mixtures with x equal to 0.125, 0.25 and 0.5 and atomic structure of Sr(NH{sub 3}){sub 8}Cl{sub 2}. - Highlights: • Solid solutions of strontium and barium chloride were synthesized by spray drying. • Adjusting molar ratios led to different crystallographic phases and compositions. • Different molar ratios led to different ammonia ab-/desorption properties. • 35–50 mol% BaCl{sub 2} in SrCl{sub 2} yields higher ammonia density than any other metal halide. • DFT calculations can be used to predict properties of the mixtures.« less

Effect of ultrasound application during setting on the mechanical properties of high viscous glass-ionomers used for ART restorations.

PubMed

Daifalla, Lamia E; Mobarak, Enas H

2015-11-01

This study was conducted to evaluate the effect of ultrasound application on the surface microhardness (VHN) and diametral tensile strength (DTS) of three high viscous glass-ionomer restorative materials (HVGIRMs). For each test (VHN and DTS), a total of 180 specimens were prepared from three HVGIRMs (Ketac-Molar Aplicap, Fuji IX GP Fast, and ChemFil Rock). Specimens of each material (n = 60) were further subdivided into three subgroups (n = 20) according to the setting modality whether ultrasound (20 or 40 s) was applied during setting or not (control). Specimens within each subgroup were then equally divided (n = 10) and tested at 24 h or 28 days. For the VHN measurement, five indentations, with a 200 g load and a dwell time for 20 s, were made on the top surface of each specimen. The DTS test was done using Lloyd Testing machine at a cross-head speed of 0.5 mm/min. Ultrasound application had no significant effect on the VHN. Fuji IX GP Fast revealed the highest VHN value, followed by Ketac-Molar Aplicap, and the least was recorded for ChemFil Rock. Fuji IX GP Fast and Ketac-Molar Aplicap VHN values were significantly increased by time. ChemFil Rock recorded the highest DTS value at 24 h and was the only material that showed significant improvement with both US application times. However, this improvement did not sustain till 28 days. The ultrasound did not enhance the surface microhardness, but its positive effect on the diametral tensile strength values was material and time dependent.

Effect of ultrasound application during setting on the mechanical properties of high viscous glass-ionomers used for ART restorations

PubMed Central

Daifalla, Lamia E.; Mobarak, Enas H.

2014-01-01

This study was conducted to evaluate the effect of ultrasound application on the surface microhardness (VHN) and diametral tensile strength (DTS) of three high viscous glass-ionomer restorative materials (HVGIRMs). For each test (VHN and DTS), a total of 180 specimens were prepared from three HVGIRMs (Ketac-Molar Aplicap, Fuji IX GP Fast, and ChemFil Rock). Specimens of each material (n = 60) were further subdivided into three subgroups (n = 20) according to the setting modality whether ultrasound (20 or 40 s) was applied during setting or not (control). Specimens within each subgroup were then equally divided (n = 10) and tested at 24 h or 28 days. For the VHN measurement, five indentations, with a 200 g load and a dwell time for 20 s, were made on the top surface of each specimen. The DTS test was done using Lloyd Testing machine at a cross-head speed of 0.5 mm/min. Ultrasound application had no significant effect on the VHN. Fuji IX GP Fast revealed the highest VHN value, followed by Ketac-Molar Aplicap, and the least was recorded for ChemFil Rock. Fuji IX GP Fast and Ketac-Molar Aplicap VHN values were significantly increased by time. ChemFil Rock recorded the highest DTS value at 24 h and was the only material that showed significant improvement with both US application times. However, this improvement did not sustain till 28 days. The ultrasound did not enhance the surface microhardness, but its positive effect on the diametral tensile strength values was material and time dependent. PMID:26644916

An ultrasound-assisted system for the optimization of biodiesel production from chicken fat oil using a genetic algorithm and response surface methodology.

PubMed

Fayyazi, E; Ghobadian, B; Najafi, G; Hosseinzadeh, B; Mamat, R; Hosseinzadeh, J

2015-09-01

Biodiesel is a green (clean), renewable energy source and is an alternative for diesel fuel. Biodiesel can be produced from vegetable oil, animal fat and waste cooking oil or fat. Fats and oils react with alcohol to produce methyl ester, which is generally known as biodiesel. Because vegetable oil and animal fat wastes are cheaper, the tendency to produce biodiesel from these materials is increasing. In this research, the effect of some parameters such as the alcohol-to-oil molar ratio (4:1, 6:1, 8:1), the catalyst concentration (0.75%, 1% and 1.25% w/w) and the time for the transesterification reaction using ultrasonication on the rate of the fatty acids-to-methyl ester (biodiesel) conversion percentage have been studied (3, 6 and 9 min). In biodiesel production from chicken fat, when increasing the catalyst concentration up to 1%, the oil-to-biodiesel conversion percentage was first increased and then decreased. Upon increasing the molar ratio from 4:1 to 6:1 and then to 8:1, the oil-to-biodiesel conversion percentage increased by 21.9% and then 22.8%, respectively. The optimal point is determined by response surface methodology (RSM) and genetic algorithms (GAs). The biodiesel production from chicken fat by ultrasonic waves with a 1% w/w catalyst percentage, 7:1 alcohol-to-oil molar ratio and 9 min reaction time was equal to 94.8%. For biodiesel that was produced by ultrasonic waves under a similar conversion percentage condition compared to the conventional method, the reaction time was decreased by approximately 87.5%. The time reduction for the ultrasonic method compared to the conventional method makes the ultrasonic method superior. Copyright © 2015. Published by Elsevier B.V.

The heat capacity of hydrous cordierite above 295 K

NASA Astrophysics Data System (ADS)

Carey, J. William

1993-04-01

The heat capacity of synthetic hydrous cordierite (Mg2Al4Si5O18·nH2O) has been determined by differential scanning calorimetry (DSC) from 295 to 425 K as a function of H2O content. Six samples with H2O contents ranging from 0 to 0.82 per formula unit were examined. The partial molar heat capacity of H2O in cordierite over the measured temperature interval is independent of composition and temperature within experimental uncertainty and is equal to 43.3 ±0.8 J/mol/ K. This value exceeds the molar heat capacity of gaseous H2O by 9.7 J/mol/K, but is significantly smaller than the heat capacity of H2O in several zeolites and liquid H2O. A statistical-mechanical model of the heat capacity of adsorbed gas species (Barrer 1978) is used to extrapolate the heat capacity of hydrous cordierite to temperatures greater than 425 K. In this model, the heat capacity of hydrous cordierite (Crd·nH2O) is represented as follows: Cp(Crd · nH2O) = Cp(Crd)+ n{Cp(H2O, gas)+ R(gas constant)} (1) An examination of calorimetric data for hydrous beryl, analcime, mordenite, and clinoptilolite (Hemingway et al. 1986; Johnson et al. 1982, 1991, 1992) demonstrates the general applicability of the statistical-mechanical model for the extrapolation of heat capacity data of zeolitic minerals. The heat capacity data for cordierite are combined with the data of Carey and Navrotsky (1992) to obtain the molar enthalpy of formation and enthalpy of hydration of hydrous cordierite as a function of temperature.

Prophylaxis versus pre-emptive treatment for infective and inflammatory complications of surgical third molar removal: a randomized, double-blind, placebo-controlled, clinical trial with sustained release amoxicillin/clavulanic acid (1000/62.5 mg).

PubMed

Lacasa, J M; Jiménez, J A; Ferrás, V; Bossom, M; Sóla-Morales, O; García-Rey, C; Aguilar, L; Garau, J

2007-04-01

The most common complications after surgical extraction of the third mandibular molar are trismus, oedema or swelling, local pain, dysphagia and infection. The aim of this comparative, double-blind, randomized clinical trial was to evaluate the efficacy of two sustained release amoxicillin/clavulanate regimens in the reduction of infection after third molar extractive surgery. A total of 225 patients were randomized into three equal groups: placebo, prophylaxis with single pre-surgical dose of two tablets amoxicillin/clavulanate 1000/62.5 mg, and pre-emptive post-surgery therapy with two tablets amoxicillin/clavulanate 1000/62.5 mg BID for 5 days. A higher rate of infection (P=0.006) was found among patients receiving placebo (16%) than those receiving single-dose prophylaxis (5.3%) or 5-day pre-emptive therapy (2.7%). A relationship between both the duration (13.8% for long versus 7.4% for medium versus 1.6% for short) and difficulty (12.7% with ostectomy versus 3.5% without ostectomy; P=0.011) of surgical procedure and incidence of subsequent infection was also observed. Both prophylactic and therapeutic regimens versus placebo achieved greater reduction of pain after surgery on day 3 (P=0.001). Logistic regression analysis revealed a risk of infection of 24%, 9% and 4% for ostectomy with placebo, prophylaxis and pre-emptive treatment, respectively, whereas it was 7%, 2% and 1% if ostectomy was not performed. Pre-emptive therapy with the oral sustained release amoxicillin/clavulanate formulation reduced the rate of subsequent infection in patients undergoing ostectomy. Prophylaxis was beneficial in simpler procedures and may be indicated in cases where ostectomy is not performed.

26 CFR 1.453-9 - Gain or loss on disposition of installment obligations.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) the amount realized, in the case of satisfaction at other than face value or in the case of a sale or... the face value of the obligation over an amount equal to the income which would be returnable were the.... Face value of notes 15,000 Amount of income returnable were the notes satisfied in full, 50 percent of...

26 CFR 1.453-9 - Gain or loss on disposition of installment obligations.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) the amount realized, in the case of satisfaction at other than face value or in the case of a sale or... the face value of the obligation over an amount equal to the income which would be returnable were the.... Face value of notes 15,000 Amount of income returnable were the notes satisfied in full, 50 percent of...

26 CFR 1.453-9 - Gain or loss on disposition of installment obligations.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) the amount realized, in the case of satisfaction at other than face value or in the case of a sale or... the face value of the obligation over an amount equal to the income which would be returnable were the.... Face value of notes 15,000 Amount of income returnable were the notes satisfied in full, 50 percent of...

26 CFR 1.453-9 - Gain or loss on disposition of installment obligations.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) the amount realized, in the case of satisfaction at other than face value or in the case of a sale or... the face value of the obligation over an amount equal to the income which would be returnable were the.... Face value of notes 15,000 Amount of income returnable were the notes satisfied in full, 50 percent of...

26 CFR 1.453-9 - Gain or loss on disposition of installment obligations.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) the amount realized, in the case of satisfaction at other than face value or in the case of a sale or... the face value of the obligation over an amount equal to the income which would be returnable were the.... Face value of notes 15,000 Amount of income returnable were the notes satisfied in full, 50 percent of...

Replacement of a first molar and 3 second molars by the mesial inclination of 4 impacted third molars in an adult with a Class II Division 1 malocclusion.

PubMed

Tomonari, Hiroshi; Yagi, Takakazu; Kuninori, Takaharu; Ikemori, Takahiro; Miyawaki, Shouichi

2015-06-01

This case report presents the successful replacement of 1 first molar and 3 second molars by the mesial inclination of 4 impacted third molars. A woman, 23 years 6 months old, had a chief complaint of crowding of her anterior teeth and linguoclination of a second molar on the left side. The panoramic radiographic images showed that the maxillary and mandibular third molars on both sides were impacted. Root resorption on the distal surfaces of the maxillary second molars was suspected. The patient was given a diagnosis of Angle Class II Division 1 malocclusion with severe crowding of the anterior teeth and 4 impacted third molars. After we extracted the treated maxillary second premolars and the second molars on both sides, the treated mandibular second premolar and the second molar on the left side, and the root canal-filled mandibular first molar on the right side, the 4 impacted third molars were uprighted and formed part of the posterior functional occlusion. The total active treatment period was 39 months. The maxillary and mandibular third molars on both sides successfully replaced the first and second molars. The replacement of a damaged molar by an impacted third molar is a useful treatment option for using sound teeth. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage.

PubMed

Kang, Ju-Man; Park, Jae Hyun; Bayome, Mohamed; Oh, Moonbee; Park, Chong Ook; Kook, Yoon-Ah; Mo, Sung-Seo

2016-09-01

This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

Retained asymptomatic third molars and risk for second molar pathology.

PubMed

Nunn, M E; Fish, M D; Garcia, R I; Kaye, E K; Figueroa, R; Gohel, A; Ito, M; Lee, H J; Williams, D E; Miyamoto, T

2013-12-01

Prophylactic extraction of unerupted asymptomatic third molars is the most common oral surgery procedure in the United States. However, limited evidence exists to justify its costs and associated morbidity. We analyzed data collected over 25 years from 416 adult men enrolled in the Veterans Affairs Dental Longitudinal Study to evaluate the association of retained asymptomatic third molars with risk of adjacent second molar pathology (caries and/or periodontitis), based on third molar status (i.e., absent, erupted, or unerupted). Unerupted molars were further categorized as either "soft tissue" or "bony" impacted. We found that the lowest prevalence and incidence of second molar pathology occurred when the adjacent third molar was absent. The presence of a third molar that was soft tissue impacted increased the risk of incident second molar pathology 4.88-fold (95% confidence interval: 2.62, 9.08). Having an erupted or "bony" impacted third molar increased the risk of incident second molar pathology by 1.74 (95% confidence interval: 1.34, 2.25) and 2.16 (95% confidence interval: 1.56, 2.99), respectively. The retention of third molars is associated with increased risk of second molar pathology in middle-aged and older adult men.

Retained Asymptomatic Third Molars and Risk for Second Molar Pathology

PubMed Central

Nunn, M.E.; Fish, M.D.; Garcia, R.I.; Kaye, E.K.; Figueroa, R.; Gohel, A.; Ito, M.; Lee, H.J.; Williams, D.E.; Miyamoto, T.

2013-01-01

Prophylactic extraction of unerupted asymptomatic third molars is the most common oral surgery procedure in the United States. However, limited evidence exists to justify its costs and associated morbidity. We analyzed data collected over 25 years from 416 adult men enrolled in the Veterans Affairs Dental Longitudinal Study to evaluate the association of retained asymptomatic third molars with risk of adjacent second molar pathology (caries and/or periodontitis), based on third molar status (i.e., absent, erupted, or unerupted). Unerupted molars were further categorized as either “soft tissue” or “bony” impacted. We found that the lowest prevalence and incidence of second molar pathology occurred when the adjacent third molar was absent. The presence of a third molar that was soft tissue impacted increased the risk of incident second molar pathology 4.88-fold (95% confidence interval: 2.62, 9.08). Having an erupted or “bony” impacted third molar increased the risk of incident second molar pathology by 1.74 (95% confidence interval: 1.34, 2.25) and 2.16 (95% confidence interval: 1.56, 2.99), respectively. The retention of third molars is associated with increased risk of second molar pathology in middle-aged and older adult men. PMID:24132082

Impacted lower third molars and distal caries in the mandibular second molar. Is prophylactic removal of lower third molars justified?

PubMed

Marques, José; Montserrat-Bosch, Marta; Figueiredo, Rui; Vilchez-Pérez, Miguel-Angel; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2017-06-01

The objective of this study was to evaluate the association between the presence of mandibular third molars and the occurrence of carious lesions in the distal aspect of the mandibular second molar. A retrospective cohort study comprising 327 lower third molars extracted in the Oral Surgery and Implantology Master's Degree program of the School of Dentistry of the University of Barcelona (Barcelona, Spain) was carried out. A descriptive and bivariate analysis was made. The diagnosis of caries in the second molar and the position of the mandibular third molar were evaluated through panoramic radiographies. The sample included 203 patients, 94 males (46.3%) and 109 females (53.7%), with a mean age of 26,8 years and 327 lower third molars. The prevalence of second molar distal caries was 25.4% (95% CI= 20.6% to 30.2%). This pathology was significantly more frequent when the third molar was in a horizontal position (27.7%), when the contact point was at (45,8%) or below (47.0%) the cementoenamel junction (CEJ), and when the distal CEJ of the mandibular second molar and the mesial CEJ of the third molar was 7 to 12 mm apart. Horizontal lower third molars with contact points at or below the CEJ are more likely to produce distal caries in the mandibular second molars. Due to the high prevalence of this pathology (20.6% to 30.2%), a prophylactic removal of lower third molars with the above-mentioned features might be advisable. Key words: Second molar, caries, third molar, prophylactic removal.

7 CFR 1944.261 - Program participant fees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... receiving more than one meal per day, seven days per week, shall be reasonable and shall equal between 10....145(a). Each program participant shall pay CHSP fees as stated in paragraphs (d) and (e) of this... paragraph (d)(1) of this section shall be in an amount equal to 10 percent of the adjusted income of the...

24 CFR 700.150 - Program participant fees.

Code of Federal Regulations, 2010 CFR

2010-04-01

... receiving more than one meal per day, seven days per week, shall be reasonable and shall equal between 10... 700.145(a). Each program participant shall pay CHSP fees as stated in paragraphs (d) and (e) of this... paragraph (d)(1) of this section shall be in an amount equal to 10 percent of the adjusted income of the...

The Counter-Normative Effects of Service-Learning: Fostering Attitudes toward Social Equality through Contact and Autonomy

ERIC Educational Resources Information Center

Brown, Margaret A.; Wymer, Jared D.; Cooper, Cierra S.

2016-01-01

Power dynamics are implicated in intergroup prosocial behavior (Nadler & Halabi, 2015). This research investigated two factors that influence the effect of intergroup prosocial behavior on views of social equality: amount of direct intergroup contact and type of helping. Students in a social psychology course (N = 93) were randomly assigned to…

A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage

PubMed Central

Kang, Ju-Man; Park, Jae Hyun; Bayome, Mohamed; Oh, Moonbee; Park, Chong Ook; Mo, Sung-Seo

2016-01-01

Objective This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization. PMID:27668192

34 CFR 668.175 - Alternative standards and requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... payable to the Secretary, for an amount equal to at least one-half of the amount of title IV, HEA program funds that the Secretary determines the institution will receive during its initial year of... each of its subsequent two fiscal years, the Secretary determines that the institution's composite...

34 CFR 668.175 - Alternative standards and requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... payable to the Secretary, for an amount equal to at least one-half of the amount of title IV, HEA program funds that the Secretary determines the institution will receive during its initial year of... each of its subsequent two fiscal years, the Secretary determines that the institution's composite...

42 CFR 422.382 - Minimum net worth amount.

Code of Federal Regulations, 2014 CFR

2014-10-01

... that CMS considers appropriate to reduce, control or eliminate start-up administrative costs. (b) After... amount equal to the sum of— (i) Eight percent of annual health care expenditures paid on a non-capitated basis to non-affiliated providers; and (ii) Four percent of annual health care expenditures paid on a...

7 CFR 1980.471 - Liquidation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.471 Liquidation. (See § 1980.64 of... loss claim is involved on a particular loan guarantee, ordinarily one “Estimated Loss Report” will be... amount of the loan and interest cannot be accrued on the principal amount of the loan that is equal to...

7 CFR 1980.471 - Liquidation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.471 Liquidation. (See § 1980.64 of... loss claim is involved on a particular loan guarantee, ordinarily one “Estimated Loss Report” will be... amount of the loan and interest cannot be accrued on the principal amount of the loan that is equal to...

7 CFR 1980.471 - Liquidation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.471 Liquidation. (See § 1980.64 of... loss claim is involved on a particular loan guarantee, ordinarily one “Estimated Loss Report” will be... amount of the loan and interest cannot be accrued on the principal amount of the loan that is equal to...

7 CFR 1980.471 - Liquidation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.471 Liquidation. (See § 1980.64 of... loss claim is involved on a particular loan guarantee, ordinarily one “Estimated Loss Report” will be... amount of the loan and interest cannot be accrued on the principal amount of the loan that is equal to...

Cone-beam Computed Tomographic Study of Root Anatomy and Canal Configuration of Molars in a Spanish Population.

PubMed

Pérez-Heredia, Mercedes; Ferrer-Luque, Carmen María; Bravo, Manuel; Castelo-Baz, Pablo; Ruíz-Piñón, Manuel; Baca, Pilar

2017-09-01

The aim of this study was to identify morphologic peculiarities of roots and analyze the root canal configuration in maxillary and mandibular first and second molars by means using cone-beam computed tomographic (CBCT) imaging in a Spanish population. A total of 284 maxillary molars and 242 mandibular molars from 112 patients were examined in vivo by CBCT imaging; only untreated molars with healthy and fully matured apices were included in this study. Details regarding the number of roots, number of canals, and root canal configuration were recorded. Maxillary first and second molars had 3 roots in 97.2% and 79%, respectively. In mandibular molars, the frequency of 2 roots was 94% in first molars and 83% in second molars. The canal configuration of the palatal root was 100% Vertucci type I (1-1) in first and second molars. The distobuccal root showed a Vertucci type I configuration in 97% of first and 100% of maxillary second molars. The mesiobuccal root for first molars showed a Vertucci type II configuration (2-1) in 56.5% cases and Vertucci type IV (2-2) in 23.2%. For maxillary second molars, the Vertucci type I configuration reached 52.7%. In mandibular molars, the mesial root showed higher variability. Most frequent was the presence of 2 canals, Vertucci type II for first and second molars. In the distal root, the most common configuration was Vertucci type I in both molars. The greater percentage of fused roots was observed in maxillary molars. Vertucci type II configuration was more frequent than type IV in the mesial root of mandibular molars and the mesiobuccal root of maxillary molars. A third canal in the mesial root of first mandibular molars (6.7%) was higher than expected. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Effects of yeast and bran on phytate degradation and minerals in rice bread.

PubMed

Kadan, R S; Phillippy, B Q

2007-05-01

Rice bread is a potential alternative to wheat bread for gluten-sensitive individuals. Incorporation of rice bran into bread made from white rice flour adds flavor but also phytic acid, which can reduce the bioavailability of minerals. Breads with varied amounts of defatted bran and yeast were prepared to determine their effects on the phytate and mineral contents of the bread. A completely randomized factorial design was used with bran levels of 3.7%, 7.3%, and 10.5% of the dry ingredients and yeast levels of 1.6%, 3.2%, and 4.7%. Increasing the amount of bran decreased the phytate degradation from 42% at the lowest level of bran to 10% at the highest, and the amount of yeast had no significant effect. The bran contributed substantial amounts of magnesium, iron, and zinc. Breads with the lowest level of bran had phytate-to-zinc molar ratios between 5 and 10, which suggest medium zinc bioavailability. Rice bread is a tasty and nutritious food that is a good dietary source of minerals for people who cannot tolerate wheat bread.

Effect of Different Ceramic Crown Preparations on Tooth Structure Loss: An In Vitro Study

NASA Astrophysics Data System (ADS)

Ebrahimpour, Ashkan

Objective: To quantify and compare the amount of tooth-structure reduction following the full-coverage preparations for crown materials of porcelain-fused-to-metal, lithium disilicate glass-ceramic and yttria-stabilized tetragonal zirconia polycrystalline for three tooth morphologies. Methods: Groups of resin teeth of different morphologies were individually weighed to high precision, then prepared following the preparation guidelines. The teeth were re-weighed after preparation and the amount of structural reduction was calculated. Statistical analyses were performed to find out if there was a significant difference among the groups. Results: Amount of tooth reduction for zirconia crown preparations was the lowest and statistically different compared with the other two materials. No statistical significance was found between the amount of reduction for porcelain-fused-to-metal and lithium disilicate glass-ceramic crowns. Conclusion: Within the limitations of this study, more tooth structure can be saved when utilizing zirconia full-coverage restorations compared with lithium disilicate glass-ceramic and porcelain-fused-to-metal crowns in maxillary central incisors, first premolars and first molars.

Impacted lower third molars and distal caries in the mandibular second molar. Is prophylactic removal of lower third molars justified?

PubMed Central

Marques, José; Montserrat-Bosch, Marta; Vilchez-Pérez, Miguel-Angel; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2017-01-01

Background The objective of this study was to evaluate the association between the presence of mandibular third molars and the occurrence of carious lesions in the distal aspect of the mandibular second molar. Material and Methods A retrospective cohort study comprising 327 lower third molars extracted in the Oral Surgery and Implantology Master’s Degree program of the School of Dentistry of the University of Barcelona (Barcelona, Spain) was carried out. A descriptive and bivariate analysis was made. The diagnosis of caries in the second molar and the position of the mandibular third molar were evaluated through panoramic radiographies. Results The sample included 203 patients, 94 males (46.3%) and 109 females (53.7%), with a mean age of 26,8 years and 327 lower third molars. The prevalence of second molar distal caries was 25.4% (95% CI= 20.6% to 30.2%). This pathology was significantly more frequent when the third molar was in a horizontal position (27.7%), when the contact point was at (45,8%) or below (47.0%) the cementoenamel junction (CEJ), and when the distal CEJ of the mandibular second molar and the mesial CEJ of the third molar was 7 to 12 mm apart. Conclusions Horizontal lower third molars with contact points at or below the CEJ are more likely to produce distal caries in the mandibular second molars. Due to the high prevalence of this pathology (20.6% to 30.2%), a prophylactic removal of lower third molars with the above-mentioned features might be advisable. Key words:Second molar, caries, third molar, prophylactic removal. PMID:28638558

Esterification free fatty acid in sludge palm oil using ZrO2/SO42- - rice husk ash catalyst

NASA Astrophysics Data System (ADS)

Hidayat, Arif; Sutrisno, Bachrun

2017-05-01

Indonesia, as one of the biggest palm oil producers and exporters in the world, is producing large amounts of low-grade oil such as sludge palm oil (SPO) from palm oil industries. The use of SPO can lower the cost of biodiesel production significantly, which makes SPO a highly potential alternative feedstock for biodiesel production. In this paper, the esterification of free fatty acid on sludge palm oil was studied using rice husk ash as heterogeneous solid catalysts. Heterogeneous solid catalysts offer significant advantages of eliminating separation, corrosion, toxicity and environmental problems. In this paper the esterification of SPO, a by-product from palm oil industry, in the presence of modified rice husk ash catalysts was studied. The rice husk ash catalysts were synthesized by impregnating of Zirconia (Zr) on rice husk ash followed by sulfonation. The rice husk ash catalysts were characterized by using different techniques, such as FT-IR, XRD, and porous analysis. The effects of the mass ratio of catalyst to oil (1 - 10%), the molar ratio of methanol to oil (4:1 - 10:1), and the reaction temperature (40 - 60°C) were studied for the conversion of free fatty acids (FFAs) to optimize the reaction conditions. The results showed that the optimal conditions were an methanol to oil molar ratio of 10:1, the amount of catalyst of 10%w, and reaction temperature of 60°C.

Synthesis of structured lipids by lipase-catalyzed interesterification of triacetin with camellia oil methyl esters and preliminary evaluation of their plasma lipid-lowering effect in mice.

PubMed

Cao, Yu; Qi, Suijian; Zhang, Yang; Wang, Xiaoning; Yang, Bo; Wang, Yonghua

2013-03-25

Structured lipids (SLCTs triacylglycerols with short- and long-chain acyl residues) were synthesized by interesterification of triacetin and fatty acid methyl esters (FAMEs) from camellia oil, followed by molecular distillation for purification. Different commercial immobilized lipases (Lipozyme RM IM and Novozyme 435), the substrate molar ratios of FAMEs to triacetin, the reaction temperatures and the lipase amounts were studied for their efficiency in producing SLCTs. Results showed that Novozyme 435 was more suitable for this reaction system. Moreover, the optimal reaction conditions for the highest conversion of FAMEs and the highest LLS-TAGs (triacylglycerols with one short- and two long-chain acyl residues) yields were achieved at a molar ratio of FAMEs to triacetin of 3:1, 50 °C of reaction temperature and a lipase amount of 4% (w/v). Scale-up was conducted based on the optimized reaction conditions. Results showed that after 24 h of reaction , the conversion rate of FAMEs was 82.4% and the rate of disubstituted triacetin was 52.4 mol%. The final product yield rate was 94.6%. The effects of the synthesized SLCTs on the plasma lipid level of fasting mice were also studied. The SLCTs could effectively lessen the total triacylglycerol levels in plasma compared to the triacylglycerol group in fasting NIH mice. It suggested that this type of structured lipid might be beneficial for human health, especially for the prevention of obesity.

Co2+-exchange mechanism of birnessite and its application for the removal of Pb2+ and As(III).

PubMed

Yin, Hui; Liu, Fan; Feng, Xionghan; Liu, Mingming; Tan, Wenfeng; Qiu, Guohong

2011-11-30

Co-containing birnessites were obtained by ion exchange at different initial concentrations of Co(2+). Ion exchange of Co(2+) had little effect on birnessite crystal structure and micromorphology, but resulted in an increase in specific surface areas from 19.26 to 33.35 m(2)g(-1), and a decrease in both crystallinity and manganese average oxidation state. It was due to that Mn(IV) in the layer structure was reduced to Mn(III) during the oxidation process of Co(2+) to Co(III). The hydroxyl groups on the surface of Co-containing birnessites gradually decreased with an increase of Co/Mn molar ratio owing to the occupance of Co(III) into vacancies and the location of large amounts of Co(2+/3+) and Mn(2+/3+) above/below the vacant sites. This greatly accounted for the monotonous reduction in Pb(2+) adsorption capacity, from 2538 mmol kg(-1) for the unmodified birnessite to 1500 mmol kg(-1) for the Co(2+) ion-exchanged birnessite with a Co/Mn molar ratio of 0.16. The amount of As(III) oxidized by birnessite was enhanced after ion exchange, but the apparent initial reaction rate was greatly decreased. The present work demonstrates that Co(2+) ion exchange has great influence on the adsorption and oxidation behavior of inorganic toxic metal ions by birnessite in water environments. Copyright © 2011 Elsevier B.V. All rights reserved.

[Attrition, dentin apposition and protein synthesis in the pulp and desmodont of young and old rats].

PubMed

Schroeder, H E; Münzel-Pedrazzoli, S

1994-01-01

Occlusal attrition and responsive adaptations in the pulp-dentinal unit are still problematic. In this study, up to 2 years-old rats were used to measure the amount of occlusal attrition, of dentin apposition and of the incorporation of 3H-proline into the pulpal and periodontal ligament tissues. Two to four SIV-rats each, 45, 365 and 730 days of age, were once injected with 3H-proline 2 hours or 5 days prior to exitus. After cardiac perfusion, the molar blocks of both jaws were decalcified in EDTA and divided into bucco-oral and mesio-distal slices. The latter were embedded in Epon. Semithin sections served to measure the amount of attrition and of tertiary dentin apposition, as well as for autoradiographic labelling and determination of the rate of dentin apposition and proline incorporation in pulpal and periodontal ligament tissues. The results show that (1) the molar cusps lost up to 40% of their initial height during the two years of life, (2) occlusal dentin apposition in the intercuspal region led to an increase in dentinal thickness by 50 to 70%, while in the pulp horn region dentinal apposition occurred early in life and later did not keep phase with attrition, and (3) protein synthesis in pulp and periodontal ligament essentially did not change within the two years of life. These findings are related to that of other authors and discussed in connection with dentinal innervation.

Predictive model of third molar eruption after second molar extraction.

PubMed

De-la-Rosa-Gay, Cristina; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2010-03-01

Extraction of second permanent molars is an option for providing space in orthodontic treatment. Although many articles have described its impact on the outcome, there are few data on the prognosis of the eruption of the adjacent third molars. The aims of this investigation were to provide predictive models of eruption of third molars after second permanent molar extraction and to validate them. A total of 48 patients (ages, 11-23 years) who had 128 second permanent molars (54 maxillary, 74 mandibular) extracted during orthodontic treatment were followed until eruption of the third molars was complete. A lineal regression model predicted the final angle of the third molars with the permanent first molar by using the variables of initial angle, jaw, and the developmental stage of the third molar. A logistic regression model predicted the probability of correct eruption by using the variables of initial angle, jaw, sex, age, and the developmental stage of the third molar. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Correction of a mutilated dentition with mini-implants as anchorage.

PubMed

Hyun, Jae-Man; Kim, Tae-Woo

2010-11-01

The patient was an adolescent boy, aged 15.6 years, with a mutilated dentition. He had extrusion of the maxillary left first molar because of loss of the mandibular first molar and lingual tilting and rotation of the mandibular second molars. Both left and right second molars were in scissors-bite that was more severe on the left side. By using mini-implants and a TPA with hooks, a 3-mm intrusion was successfully made on the maxillary left first molar. This provided room for mesial movement of the mandibular left second molar. The second molar was protracted into the space of the missing first molar, and the mandibular left third molar was positioned in place of the second molar. The second molars scissors-bite was corrected. Active treatment took 45 months, and the treatment result remained stable 2 years after debonding. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Conversion of Monogalactosyldiacylglycerols to Triacylglycerols in Ozone-Fumigated Spinach Leaves

PubMed Central

Sakaki, Takeshi; Saito, Kazuki; Kawaguchi, Akihiko; Kondo, Noriaki; Yamada, Mitsuhiro

1990-01-01

Molecular species and fatty acid distribution of triacylglycerol (TG) accumulated in spinach (Spinacia oleracea L.) leaves fumigated with ozone (0.5 microliter per liter) were compared with those of monogalactosyldiacylglycerol (MGDG). Analysis of positional distribution of the fatty acids in MGDG and the accumulated TG by the enzymatic digestion method showed that hexadecatrienoate (16:3) was restricted to sn-2 position of the glycerol backbone in both MGDG and TG, whereas α-linolenate (18:3) was preferentially located at sn-1 position in MGDG, and sn-1 and/or sn-3 positions in TG, suggesting that 1,2-diacylglycerol moieties of MGDG are the direct precursor of TG in ozonefumigated leaves. Further analysis of TG molecular species by argentation chromatography and mass spectrometry showed that TG increased with ozone fumigation consisted of approximately an equal molar ratio of sn-1,3-18:3-2-16:3 and sn-1,2,3-18:3. Because the molecular species of MGDG in spinach leaves is composed of a similar molar ratio of sn-1-18:3-2-16:3 and sn-1,2-18:3, we concluded that MGDG was converted to 1,2-diacylglycerol and acylated with 18:3 to TG in ozone-fumigated spinach leaves. Images Figure 1 PMID:16667777

12 CFR 327.52 - Annual dividend determination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the DIF reserve ratio as of December 31st of 2008 or any later year equals or exceeds 1.35 percent... dividend based upon the reserve ratio of the DIF as of December 31st of the preceding year, and the amount... ratio of the DIF equals or exceeds 1.35 percent of estimated insured deposits and does not exceed 1.50...

AXIAL MODIFICATIONS OF PERMANENT LOWER MOLARS AFTER PREMATURE LOSSES OF TEMPORARY MOLARS.

PubMed

Cernei, E R; Mavru, R B; Zetu, Irina Nicoleta

2016-01-01

The aim of our study was to determine the impact of premature loss of temporary lower molars upon the longitudinal axis of the first and second permanent molars. The study groups included 61 patients, 6-9 year olds with premature loss of primary molars and a control group of 24 patients with intact temporary teeth. We evaluated the angle between longitudinal axis of first and second lower permanent molars and occlusal plane. It was observed that premature loss of lower second deciduous molar modifies more the vertical axis of first and second permanent molars than the premature loss of first lower primary molar. Reducing space occurs mainly through mesial inclination of molars that separates the edentulous breach. Temporary loss of both lower first molars on the same quadrant causes an accelerated eruption of both premolars increasing the prevalence of eruption sequence: "4-5-3-7". The preservation of the occlusal morpho-functional complex using space maintainers mainly when the premature loss of the second primary molars occurs is the best interceptive treatment option.

Changes in membrane lipid composition during saline growth of the fresh water cyanobacterium Synechococcus 6311

NASA Technical Reports Server (NTRS)

Huflejt, M. E.; Tremolieres, A.; Pineau, B.; Lang, J. K.; Hatheway, J.; Packer, L.

1990-01-01

Growth of Synechococcus 6311 in the presence of 0.5 molar NaCl is accompanied by significant changes in membrane lipid composition. Upon transfer of the cells from a low salt' (0.015 molar NaCl) to high salt' (0.5 molar NaCl) growth medium at different stages of growth, a rapid decrease in palmitoleic acid (C16:1 delta 9) content was accompanied by a concomitant increase in the amount of the two C18:1 acids (C18:1 delta 9, C18:1 delta 11), with the higher increase in oleic acid C18:1 delta 9 content. These changes began to occur within the first hour after the sudden elevation of NaCl and progressed for about 72 hours. The percentage of palmitic acid (C16:0) and stearic acid (C18:0) remained almost unchanged in the same conditions. High salt-dependent changes within ratios of polar lipid classes also occurred within the first 72 hours of growth. The amount of monogalactosyl diacylglycerol (bilayer-destabilizing lipid) decreased and that of the digalactosyl diacylglycerol (bilayer-stabilizing lipid) increased. Consequently, in the three day old cells, the ratio of monogalactosyl diacylglycerol to digalactosyl diacylglycerol in the membranes of high salt-grown cells was about half of that in the membranes of low salt-grown cells. The total content of anionic lipids (phosphatidylglycerol and sulfoquinovosyl diacylglycerol) was always higher in the isolated membranes and the whole cells from high salt-grown cultures compared to that in the cells and membranes from low salt-grown cultures. All the observed rearrangements in the lipid environment occurred in both thylakoid and cytoplasmic membranes. Similar lipid composition changes, however, to a much lesser extent, were also observed in the aging, low salt-grown cultures. The observed changes in membrane fatty acids and lipids composition correlate with the alterations in electron and ion transport activities, and it is concluded that the rearrangement of the membrane lipid environment is an essential part of the process by which cells control membrane function and stability.

Evaluation of the Self-Adjusting File system (SAF) for the instrumentation of primary molar root canals: a micro-computed tomographic study.

PubMed

Kaya, E; Elbay, M; Yiğit, D

2017-06-01

The Self-Adjusting File (SAF) system has been recommended for use in permanent teeth since it offers more conservative and effective root-canal preparation when compared to traditional rotary systems. However, no study had evaluated the usage of SAF in primary teeth. The aim of this study was to evaluate and compare the use of SAF, K file (manual instrumentation) and Profile (traditional rotary instrumentation) systems for primary-tooth root-canal preparation in terms of instrumentation time and amounts of dentin removed using micro-computed tomography (μCT) technology. Study Design: The study was conducted with 60 human primary mandibular second molar teeth divided into 3 groups according to instrumentation technique: Group I: SAF (n=20); Group II: K file (n=20); Group III; Profile (n=20). Teeth were embedded in acrylic blocks and scanned with a μCT scanner prior to instrumentation. All distal root canals were prepared up to size 30 for K file,.04/30 for Profile and 2 mm thickness, size 25 for SAF; instrumentation time was recorded for each tooth, and a second μCT scan was performed after instrumentation was complete. Amounts of dentin removed were measured using the three-dimensional images by calculating the difference in root-canal volume before and after preparation. Data was statistically analysed using the Kolmogorov-Smirnov and Kruskal-Wallis tests. Manual instrumentation (K file) resulted in significantly more dentin removal when compared to rotary instrumentation (Profile and SAF), while the SAF system generated significantly less dentin removal than both manual instrumentation (K file) and traditional rotary instrumentation (Profile) (p<.05). Instrumentation time was significantly greater with manual instrumentation when compared to rotary instrumentation (p<.05), whereas instrumentation time did not differ significantly between the Profile and SAF systems. Within the experimental conditions of the present study, the SAF seems as a useful system for root-canal instrumentation in primary molars because it removed less dentin than other systems, which is especially important for the relatively thin-walled canals of primary teeth, and because it involves less clinical time, which is particularly important in the treatment of paediatric patients.

Contribution of acidic components to the total acid number (TAN) of bio-oil

DOE PAGES

Park, Lydia K-E.; Liu, Jiaojun; Yiacoumi, Sotira; ...

2017-03-28

Bio-oil or pyrolysis oil — a product of thermochemical decomposition of biomass under oxygen-limited conditions — holds great potential to be a substitute for nonrenewable fossil fuels. But, its high acidity, which is primarily due to the degradation of hemicelluloses, limits its applications. For the evaluation of bio-oil production and treatment, it is essential to accurately measure the acidity of bio-oil. The total acid number (TAN), which is defined as the amount of potassium hydroxide needed to titrate one gram of a sample and has been established as an ASTM method to measure the acidity of petroleum products, has beenmore » employed to investigate the acidity of bio-oil. The TAN values of different concentrations of bio-oil components such as standard solutions of acetic acid, propionic acid, vanillic acid, hydroxybenzoic acid, syringic acid, hydroxymethylfurfural, and phenol were analyzed according to the ASTM D664 standard method. Our method showed the same linear relationship between the TAN values and the molar concentrations of acetic, propionic, and hydroxybenzoic acids. A different linear relationship was found for vanillic acid, due to the presence of multiple functional groups that can contribute to the TAN value. Furthermore, the influence of the titration solvent on the TAN values has been determined by comparing the TAN values and titration curves obtained from the standard method with results from the TAN analysis in aqueous environment and with equilibrium modeling results. Aqueous bio-oil samples with a known amount of acetic acid added were also analyzed. The additional acetic acid in bio-oil samples caused a proportional increase in the TAN values. These results of this research indicate that the TAN value of a sample with acids acting as monoprotic acids in the titration solvent can be converted to the molar concentration of total acids. For a sample containing acids that act as diprotic and polyprotic acids, however, its TAN value cannot be simply converted to the molar concentration of total acids because these acids have a stronger contribution to the TAN values than the contribution of monoprotic acids.« less

Contribution of acidic components to the total acid number (TAN) of bio-oil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Lydia K-E.; Liu, Jiaojun; Yiacoumi, Sotira

Bio-oil or pyrolysis oil — a product of thermochemical decomposition of biomass under oxygen-limited conditions — holds great potential to be a substitute for nonrenewable fossil fuels. But, its high acidity, which is primarily due to the degradation of hemicelluloses, limits its applications. For the evaluation of bio-oil production and treatment, it is essential to accurately measure the acidity of bio-oil. The total acid number (TAN), which is defined as the amount of potassium hydroxide needed to titrate one gram of a sample and has been established as an ASTM method to measure the acidity of petroleum products, has beenmore » employed to investigate the acidity of bio-oil. The TAN values of different concentrations of bio-oil components such as standard solutions of acetic acid, propionic acid, vanillic acid, hydroxybenzoic acid, syringic acid, hydroxymethylfurfural, and phenol were analyzed according to the ASTM D664 standard method. Our method showed the same linear relationship between the TAN values and the molar concentrations of acetic, propionic, and hydroxybenzoic acids. A different linear relationship was found for vanillic acid, due to the presence of multiple functional groups that can contribute to the TAN value. Furthermore, the influence of the titration solvent on the TAN values has been determined by comparing the TAN values and titration curves obtained from the standard method with results from the TAN analysis in aqueous environment and with equilibrium modeling results. Aqueous bio-oil samples with a known amount of acetic acid added were also analyzed. The additional acetic acid in bio-oil samples caused a proportional increase in the TAN values. These results of this research indicate that the TAN value of a sample with acids acting as monoprotic acids in the titration solvent can be converted to the molar concentration of total acids. For a sample containing acids that act as diprotic and polyprotic acids, however, its TAN value cannot be simply converted to the molar concentration of total acids because these acids have a stronger contribution to the TAN values than the contribution of monoprotic acids.« less

In vitro Comparison of Apical Debris Extrusion Using Rotary and Reciprocating Systems in Severely Curved Root Canals

PubMed Central

Delvarani, Abbas; Mohammadzadeh Akhlaghi, Nahid; Aminirad, Raana; Tour Savadkouhi, Sohrab; Vahdati, Seyed Aliakbar

2017-01-01

Introduction: The aim of this in vitro study was to compare the amount of apically extruded debris after root canal preparation using rotary and reciprocating systems in severely curved root canals. Methods and Materials: Thirty six extracted human mandibular first molars with 25-35° curvature in their mesiobuccal (MB) canal (according to Schneider’s method) were cleaned and shaped with ProTaper and WaveOne systems. The extruded debris was collected and their net weight was calculated. To compare the efficiency of the two systems, the operation time was also measured. The data were analyzed with t-test. Results: The amount of extruded debris in WaveOne group was significantly greater in comparison with ProTaper group (26%). The operating time for ProTaper was however, significantly longer than WaveOne. Conclusion: Both root preparation systems caused some degree of debris extrusion through the apical foramen. However, this amount was greater in WaveOne instruments. PMID:28179921

12 CFR 705.7 - Loans to participating credit unions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... nonmember deposit. (b) Matching requirements. Participating credit unions will be encouraged to develop, as... matched by the participating credit union by increasing its share deposits in an amount equal to the loan amount. However, any loan monies matched by member share deposits will be credited as a two-for-one match...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2014 CFR

2014-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2014-04-01 2014-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2013 CFR

2013-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2013-04-01 2013-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2011 CFR

2011-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2011-04-01 2011-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2012 CFR

2012-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2012-04-01 2012-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

20 CFR 416.2050 - Mandatory minimum State supplementation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... supplementary payment in the case of any eligible individual or couple for any month is equal to: (1) The amount by which such individual or couple's December 1973 income (as defined in paragraph (b) of this section) exceeds the amount of such individual or couple's title XVI benefit plus other income which would...

42 CFR 422.382 - Minimum net worth amount.

Code of Federal Regulations, 2010 CFR

2010-10-01

... amount equal to the sum of— (i) Eight percent of annual health care expenditures paid on a non-capitated basis to non-affiliated providers; and (ii) Four percent of annual health care expenditures paid on a capitated basis to non-affiliated providers plus annual health care expenditures paid on a non-capitated...

42 CFR 422.382 - Minimum net worth amount.

Code of Federal Regulations, 2011 CFR

2011-10-01

... amount equal to the sum of— (i) Eight percent of annual health care expenditures paid on a non-capitated basis to non-affiliated providers; and (ii) Four percent of annual health care expenditures paid on a capitated basis to non-affiliated providers plus annual health care expenditures paid on a non-capitated...

42 CFR 422.382 - Minimum net worth amount.

Code of Federal Regulations, 2012 CFR

2012-10-01

... amount equal to the sum of— (i) Eight percent of annual health care expenditures paid on a non-capitated basis to non-affiliated providers; and (ii) Four percent of annual health care expenditures paid on a capitated basis to non-affiliated providers plus annual health care expenditures paid on a non-capitated...

42 CFR 422.382 - Minimum net worth amount.

Code of Federal Regulations, 2013 CFR

2013-10-01

... amount equal to the sum of— (i) Eight percent of annual health care expenditures paid on a non-capitated basis to non-affiliated providers; and (ii) Four percent of annual health care expenditures paid on a capitated basis to non-affiliated providers plus annual health care expenditures paid on a non-capitated...

On the hydrophilicity of polyzwitterion poly (N,N-dimethyl-N-(3-(methacrylamido)propyl)ammoniopropane sulfonate) in water, deuterated water, and aqueous salt solutions.

PubMed

Hildebrand, Viet; Laschewsky, André; Zehm, Daniel

2014-01-01

A series of zwitterionic model polymers with defined molar masses up to 150,000 Da and defined end groups are prepared from sulfobetaine monomer N,N-dimethyl-N-(3-(methacrylamido)propyl)ammoniopropanesulfonate (SPP). Polymers are synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT) using a functional chain transfer agent labeled with a fluorescent probe. Their upper critical solution temperature-type coil-to-globule phase transition in water, deuterated water, and various salt solutions is studied by turbidimetry. Cloud points increase with polyzwitterion concentration and molar mass, being considerably higher in D2O than in H2O. Moreover, cloud points are strongly affected by the amount and nature of added salts. Typically, they increase with increasing salt concentration up to a maximum value, whereas further addition of salt lowers the cloud points again, mostly down to below freezing point. The different salting-in and salting-out effects of the studied anions can be correlated with the Hofmeister series. In physiological sodium chloride solution and in phosphate buffered saline (PBS), the cloud point is suppressed even for high molar mass samples. Accordingly, SPP-polymers behave strongly hydrophilic under most conditions encountered in biomedical applications. However, the direct transfer of results from model studies in D2O, using, e.g. (1)H NMR or neutron scattering techniques, to 'normal' systems in H2O is not obvious.

Production of Biodiesel by Esterification of Free Fatty Acid over Solid Catalyst from Biomass Waste

NASA Astrophysics Data System (ADS)

Mukti, N. I. F.; Sutrisno, B.; Hidayat, A.

2018-05-01

Recently, low cost feedstocks have been utilized to replace vegetable oils in order to improve the economic feasibility of biodiesel. The esterification of free fatty acid (FFA) on Palm Fatty Acid Distillate (PFAD) with methanol using solid catalyst generated from bagasse fly ash is a promising method to convert FFA into biodiesel. In this research, the esterification of FFA on PFAD using the sulfonated bagasse fly ash catalyst was studied. The performances of the catalysts were evaluated in terms of the reaction temperatures, the molar ratios of methanol to PFAD, and the catalyst loading. The effects of the mass ratio of catalyst to oil (1-10%), the molar ratio of methanol to oil (6:1-12:1), and the reaction temperature (40-60°C) were studied for the conversion of PFAD to optimize the reaction conditions. The results showed that the optimum conditions were methanol to PFAD molar ratio of 12:1, the amount of catalyst of 10%wt. of PFAD, and reaction temperature of 6°C. The reusability of the solid acid carbon catalysts was also studied in this work. The catalytic activity decreased up to 38% after third cycle. The significant decline in catalyst esterification activity was due to acid site leaching. The physico-characteristics and acid site densities were analyzed by Nitrogen gas adsorption, surface functional groups by Fourier transform infrared spectroscopy (FT-IR), elemental analysis using X-ray fluorescent (XRF), and acid-base back titration methods for determination of acid density.

Early extraction of the mandibular third molar in case of eruption disturbances of the second molar.

PubMed

Kavadia, S; Antoniades, K; Kaklamanos, E; Antoniades, V; Markovitsi, E; Zafiriadis, L

2003-01-01

General consensus has been reached on extracting mandibular third molars when they are involved in pathologic processes. However, early extraction is advisable in cases of eruption disturbances of the mandibular second molar, before or during orthodontic treatment. Thirty-two patients with early extraction of the mandibular third molar before or during orthodontic treatment were examined. In these cases either the presence of the third molar presented an obstacle in the eruption path of the second, or third molar germ removal was considered beneficial to the course of orthodontic treatment. Early extraction of the mandibular third molar facilitates the eruption of the second molar, especially in cases where evidence of crowding and lack of space in the posterior mandibular region exist. Orthodontic treatment may, in some cases, aggravate eruption disturbances of the second molar.

Influence of third molar space on angulation and dental arch crowding.

PubMed

Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsuchimochi, Takashi; Ishikawa, Fujiro; Nakahara, Sen

2013-01-01

The influence of the third molars on mandibular incisor crowding has been extensively studied but remains controversial. The purpose of this study was to ascertain whether, in Mongolian subjects, the lower third molar can affect anterior crowding and/or the inclination of teeth in the lower lateral segments. Panoramic radiographs, 45° oblique cephalograms, and dental casts were taken from Mongolian subjects (age range 18.3-24.1 years, mean 21.0 years) exhibiting impaction of all four third molars and an Angle Class I molar relationship. The Ganss ratio was calculated using panoramic radiographs, whereas the gonial angle and angulation of lower canines, premolars and molars were measured using 45° oblique cephalograms. Little's index of irregularity was calculated using dental casts. Significant relationships between the angulation of the third and second molars and between the first molars and second premolars were found. Conversely, there was no significant correlation between the angulation of third molars, first premolars and canines. The Ganss ratio calculations showed that the lower first and second molars and the second premolars inclined mesially if there was insufficient space for the lower third molars. However, there was no significant correlation between Little's index of irregularity and third molar angulation. Furthermore, although the third molar influences the lateral segments, no obvious relationship between the third molar and anterior crowding was observed. Therefore, the angulation of the third molar appears not to cause anterior crowding.

Use of cone beam computed tomography to assess significant imaging findings related to mandibular third molar impaction.

PubMed

Matzen, Louise Hauge; Schropp, Lars; Spin-Neto, Rubens; Wenzel, Ann

2017-11-01

The aim of the study was to identify risk factors for pathoses related to mandibular third molars observed in cone beam computed tomography. Cone beam computed tomography volumes of 410 mandibular third molars were assessed by 3 observers, according to the angulation and position of the third molar in relation to the second molar. In addition, pathoses (marginal bone loss, resorption of the second molar, increased follicular space and lingual bone perforation) were assessed. Logistic regression analyses were used to test whether the angulation and position of the third molar were risk factors for pathoses. On average, 41% of second molars had resorption; mesioangulated (odds ratio [OR] 11-107; P < .001) and horizontally positioned (OR 13-120; P < .001) third molars located cervically at the second molar (OR 2-3; P < .027) significantly increased the risk. On average, 49% of second molars had marginal bone loss; mesioangulated (OR 16-85; P < .001) and horizontally positioned (OR 61-573; P < .001) third molars increased the risk. For the third molar, an increased follicular space was seen in 25% of cases; distal (OR 5-9; P < .001) and vertical positions (OR 5; P < .002) increased the risk. Lingual bone perforation was not related to a specific angulation. Specific angulations of the mandibular third molar are risk factors for marginal bone loss and resorption of the second molar. Copyright © 2017 Elsevier Inc. All rights reserved.

Comparison of TID Effects in Space-Like Variable Dose Rates and Constant Dose Rates

NASA Technical Reports Server (NTRS)

Harris, Richard D.; McClure, Steven S.; Rax, Bernard G.; Evans, Robin W.; Jun, Insoo

2008-01-01

The degradation of the LM193 dual voltage comparator has been studied at different TID dose rate profiles, including several different constant dose rates and a variable dose rate that simulates the behavior of a solar flare. A comparison of results following constant dose rate vs. variable dose rates is made to explore how well the constant dose rates used for typical part testing predict the performance during a simulated space-like mission. Testing at a constant dose rate equal to the lowest dose rate seen during the simulated flare provides an extremely conservative estimate of the overall amount of degradation. A constant dose rate equal to the average dose rate is also more conservative than the variable rate. It appears that, for this part, weighting the dose rates by the amount of total dose received at each rate (rather than the amount of time at each dose rate) results in an average rate that produces an amount of degradation that is a reasonable approximation to that received by the variable rate.

Competitive Bidding in a Certain Class of Auctions

NASA Astrophysics Data System (ADS)

Johansson, Mathias

2006-11-01

We consider the problem of determining the amount to bid in a certain type of auctions in which customers submit one sealed bid. The bid reflects the price a customer is willing to pay for one unit of the offered goods. The auction is repeated and at each auction each customer requests a certain amount of goods, an amount that we call the capacity of the customer and that varies among customers and over time. At each auction, only the customer with the largest bid-capacity product obtains any goods. The price paid by the winner equals his/her bid-capacity product, and the amount of goods obtained in return equals the winner's capacity. The auction is repeated many times, with only limited information concerning winning bid-capacity products being announced to the customers. This situation is motivated in for example wireless communication networks in which a possible way of obtaining a desired service level is to use dynamic pricing and competitive bidding. In this application, the capacity is typically uncertain when the bid is made. We derive bidding rules and loss functions for a few typical service requirements.

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...