Automated system for definition of life-cycle resources of electromechanical equipment

NASA Astrophysics Data System (ADS)

Zhukovskiy, Y.; Koteleva, N.

2017-02-01

The frequency of maintenance of electromechanical equipment depends on the plant, which uses and runs this equipment. Very often the maintenance frequency is poorly correlated with the actual state of the electromechanical equipment. Furthermore, traditional methods of diagnosis sometimes cannot work without stopping the process (for example, for equipment located in hard to reach places) and so the maintenance costs are increased. This problem can be solved using the indirect methods of diagnosing of the electromechanical equipment. The indirect methods often use the parameters in the real time and seldom use the parameters of traditional diagnostic methods for determination of the resource of electromechanical equipment. This article is dedicated to developing the structure of a special automated control system. This system must use the big flow of the information about the direct and indirect parameters of the equipment state from plants from different areas of industry and factories which produce the electromechanical equipment.

27 CFR 19.189 - Identification of structures, areas, apparatus, and equipment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... structures, areas, apparatus, and equipment. 19.189 Section 19.189 Alcohol, Tobacco Products and Firearms... Construction, Equipment, and Security Requirements Other Plant Requirements § 19.189 Identification of structures, areas, apparatus, and equipment. (a) Buildings. The proprietor must mark each building at a...

Housing, Furnishings, and Equipment Production, Management, and Services. Student Activity Book [and] Reference Book.

ERIC Educational Resources Information Center

Koukel, Sonja D.

These two publications are two of three that comprise a course that provides occupationally specific training designed to develop knowledge and skills for employment in the area of housing, furnishings, and equipment production, management, and services. The reference book is a student text that provides information needed by employees in the…

The Design of Transportation Equipment in Terms of Human Capabilities. The Role of Engineering Psychology in Transport Safety.

ERIC Educational Resources Information Center

McFarland, Ross A.

Human factors engineering is considered with regard to the design of safety factors for aviation and highway transportation equipment. Current trends and problem areas are identified for jet air transportation and for highway transportation. Suggested solutions to transportation safety problems are developed by applying the techniques of human…

Equipment and techniques for low-altitude aerial sensing of water-vapor concentration and movement

USGS Publications Warehouse

Howell, R.L.

1969-01-01

Progress in the development of equipment and techniques for making rapid measurements of moisture movement through the atmosphere over a large area is described. Airborne sensing elements measure relative humidity, temperature, and air currents. These data are telemetered to a ground-based station and recorded. A radar unit tracks the aircraft and electronically plots its position on a base map of the area being studied. Thus the distribution of atmospheric conditions can be directly related to the underlying terrain and vegetation features. ?? 1969 American Elsevier Publishing Company, Inc.

27 CFR 19.278 - Identification of structures, areas, apparatus, and equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... structures, areas, apparatus, and equipment. 19.278 Section 19.278 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Construction, Equipment and Security § 19.278 Identification of structures, areas, apparatus, and equipment. (a...

Toward Rural Prosperity: A State Policy Framework in Support of Rural Community Colleges. Policy Paper.

ERIC Educational Resources Information Center

Chesson, J. Parker, Jr.; Rubin, Sarah

In six policy areas, states can better equip rural community colleges to serve their communities. In the area of economic and community development, states can use rural community colleges to promote community development efforts and service learning and to provide small business assistance and entrepreneurship education. States can improve access…

Development and Evaluation of Vocational Competency Measures. Final Report.

ERIC Educational Resources Information Center

Chalupsky, Albert B.; And Others

A series of occupational competency tests representing all seven vocational education curriculum areas were developed, field tested, and validated. Seventeen occupations were selected for competency test development: agricultural chemicals applications technician, farm equipment mechanic, computer operator, word processing specialist, apparel…

Suggestions for Maintaining Educational Technology Programs in Hard-Pressed Areas.

ERIC Educational Resources Information Center

Greene, John W.

1984-01-01

Discusses personnel development and inexpensive sources of equipment needed for successful educational technology programs in economically hard-pressed areas in the United States and in Third World countries. Surveys future technological trends and stresses need for planning and foresight. (CJM)

Systematic Model for Validating Equipment Uses in Selected Marketing and Distribution Education Programs. Final Report, February 1, 1980-June 30, 1981.

ERIC Educational Resources Information Center

Gildan, Kate; Buckner, Leroy

Research was conducted to provide a model for selecting equipment for marketing and distributive education programs that was required for the development of the skills or competencies needed to perform in marketing and distribution occupation. A research of the literature identified both competency statements for three program areas--Fashion…

Development of Low-cost, High Energy-per-unit-area Solar Cell Modules

NASA Technical Reports Server (NTRS)

Jones, G. T.; Chitre, S.; Rhee, S. S.

1978-01-01

The development of two hexagonal solar cell process sequences, a laserscribing process technique for scribing hexagonal and modified hexagonal solar cells, a large through-put diffusion process, and two surface macrostructure processes suitable for large scale production is reported. Experimental analysis was made on automated spin-on anti-reflective coating equipment and high pressure wafer cleaning equipment. Six hexagonal solar cell modules were fabricated. Also covered is a detailed theoretical analysis on the optimum silicon utilization by modified hexagonal solar cells.

Multi-service terminal adapter based on IP technology applications in rural area

NASA Astrophysics Data System (ADS)

Gao, Li; Li, Xiaobo; Yan, Juntao; Ren, Xupeng

Take advantage of ample modern existing telecom network resources to rural areas may achieve it's information society gradually. This includes the establishment of integrated rural information service platform, modern remote education center and electronic administration management platform for rural areas. The geographical and economic constraints must be overcome for structuring the rural service support system, in order to provide technical support, information products and information services to modern rural information service system. It is important that development an access platform based IP technology, which supports multi-service access in order to implement a variety of types of mobile terminal equipment adapter access and to reduce restrictions on mobile terminal equipment.

Professional Development Needs as Perceived by Minnesota Industrial Arts/Technology Teachers.

ERIC Educational Resources Information Center

Johnson, Scott D.; Summers, Keith

1984-01-01

Describes a profile of professional development needs that was developed through a survey of 150 industrial arts/technology teachers in Minnesota. The greatest need was in the area of job environment: salary, job security, facilities and equipment, and discipline. (SK)

How To Organize Technology Areas.

ERIC Educational Resources Information Center

Fickes, Michael

1998-01-01

Highlights three ways a college or university can organize its technology areas to maximize comfort and save space. Examples are provided on controlling equipment sprawl through thoughtful workstation development, designing computer rooms for flexibility and effective cable management, and emulating business setups that are work-flow efficient and…

Procedures and equipment for fumigating European pine shoot moth on ornamental pines.

Treesearch

W.H. Klein; R.M. Thompson

1962-01-01

This is the second in a series of three reports on experimental fumigation for complete kill of the European pine shoot moth on pines in residential areas and nurseries. It describes the procedures and equipment that were developed and used for the actual fumigation tests described in the other two reports. Tests were made concerning the physical control of gas...

Medical technology advances from space research

NASA Technical Reports Server (NTRS)

Pool, S. L.

1972-01-01

Details of medical research and development programs, particularly an integrated medical laboratory, as derived from space technology are given. The program covers digital biotelemetry systems, automatic visual field mapping equipment, sponge electrode caps for clinical electroencephalograms, and advanced respiratory analysis equipment. The possibility of using the medical laboratory in ground based remote areas and regional health care facilities, as well as long duration space missions is discussed.

7. Perimeter acquisition radar power plant room #202, battery equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Perimeter acquisition radar power plant room #202, battery equipment room; showing battery room (in background) and multiple source power converter (in foreground). The picture offers another look at the shock-isolation system developed for each platform - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Power Plant, In Limited Access Area, Southwest of PARB at end of Service Road B, Nekoma, Cavalier County, ND

A BATTERY-OPERATED AIR SAMPLER FOR REMOTE AREAS

EPA Science Inventory

An air sampling system developed to evaluate air quality in biosphere reserves or in other remote areas is described. The equipment consists of a Dupont P-4000 pump and a specially designed battery pack containing Gates batteries. This air sampling system was tested in Southern U...

The development of a lunar habitability system

NASA Technical Reports Server (NTRS)

Schowalter, D. T.; Malone, T. B.

1972-01-01

Lunar shelter habitability requirements and design criteria are presented. The components of lunar shelter habitability studied are: (1) free volume, (2) compartmentalization, (3) area layout arrangement, (4) area use frequency/duration furnishings, (5) equipment operability, (6) decor, (7) lighting, (8) noise, (9) temperature, and (10) growth potential.

[Similarities between disaster areas and developing countries in terms of the lack of facilities for clinical examinations].

PubMed

Suganami, Shigeru

2012-03-01

From the experience of more than 130 emergency medical relief missions in over 50 countries/areas, the AMDA would like to propose a system of mobile clinical examinations to prepare for possible natural disasters in Japan. Such a system will require the development of vehicles equipped with a full range of laboratory equipment, which I believe will become a public property in the world, and contribute to the enhancement of medical services in disaster areas as well as in areas with less developed medical technologies. AMDA's recent medical relief activities include the support of the victims of the earthquakes in Haiti (2010) and Turkey (2011), and the flood in Thailand (2012). In these countries, the AMDA faced the lack of a clinical examination system which resulted in a huge number of patients who could not receive proper treatment after injury, or those who suffered from infectious diseases. Domestically, when the AMDA sent medical teams to the affected areas of the Great East Japan Earthquake and tsunami (2011), their activities took place mainly in evacuation shelters, where survivors needed treatment for chronic diseases and preventive care. All of these experiences highlight the importance of clinical examination in disaster areas, as well as in developing countries/areas similarly lacking basic medical services. The Japanese Society of Laboratory Medicine will surely play an important role in the development of the proposed system of mobile clinical examinations. The AMDA would like to collaborate with the JSLM in emergency relief activities and medical aid projects in areas affected by disasters or lack basic medical services.

Where do the children play? The influence of playground equipment on physical activity of children in free play.

PubMed

Farley, Thomas A; Meriwether, Rebecca A; Baker, Erin T; Rice, Janet C; Webber, Larry S

2008-03-01

Promotion of physical activity in children depends on an understanding of how children use play equipment. We conducted observations over 2 years of children in 2nd through 8th grades in a schoolyard with 5 distinct play areas with different amounts of play equipment. Children were more likely to play in areas with more installed play equipment, with densities of children in equipped areas 3.3 to 12.6 times higher than in an open grassy field. There were no significant differences by play area in the percent of children who were physically active at all, but children were more likely to be very active in areas with basketball goals and an installed play structure than in an open field. Playground equipment appeared to have a strong influence on where children played and a moderate influence on levels of activity. To maximize physical activity in children, playgrounds should be designed with ample and diverse play equipment.

Program Improvement Project for Industrial Education. Annual Report.

ERIC Educational Resources Information Center

Shaeffer, Bruce W.

Designed to improve industrial education programs through the development of minimum uniform quality standards, a project developed a task list, educationally sequenced the identified tasks, and developed a recommended shop layout and equipment list for four occupational areas: diesel repair, appliance repair, office machine repair, and small…

Helping Percussionists Play Musically.

ERIC Educational Resources Information Center

Mixon, Kevin A.

2002-01-01

Discusses how to develop musicality in young percussion students. Focuses on training students in versatility, developing their skills in technical areas, teaching them about entrance, sustaining and release, and selecting the appropriate equipment. Includes a list of "Suggestions for Fostering Musicality in Student Percussionists." (CMK)

Continuing Development of California State Packet Radio Project.

ERIC Educational Resources Information Center

Brownrigg, Edwin

1992-01-01

Provides background on the California State Library Packet Radio project, which will use packet radios to deploy a wireless, high-speed, wide-area network of 600 nodes, including 100 libraries, in the San Francisco Bay Area. Project goals and objectives, plan of operation, equipment, and evaluation plans are summarized. (MES)

Appropriate Programs for Foreign Students in U.S. Chemical Engineering Curricula.

ERIC Educational Resources Information Center

Findley, M. E.

Chemical engineers in developing countries may need abilities in a number of diverse areas including management, planning, chemistry, equipment, processes, politics, and improvisation. Chemical engineering programs for foreign students can be arranged by informed advisers with student input for inclusion of some of these areas in addition to…

Nursing Care Hour Standards Study. Part 2 thru Part 4

DTIC Science & Technology

1981-09-01

pulse area and record results. PULSE - APICAL: Place equipment at bedside, place stethoscope over .5 apex of heart and count rate, remove stethoscope ...equipment at bedside, assist physi- 2 cian with measurement, then remove equipment from area, HEART SOUNDS ASSESSMENT: Place stethoscope at bedside...Remove fingers from pulse area and record results. OR PULSE - APICAL: Place equipment at bedside, place stethoscope over apex of heart and count rate

Study of techniques for redundancy verification without disrupting systems, phases 1-3

NASA Technical Reports Server (NTRS)

1970-01-01

The problem of verifying the operational integrity of redundant equipment and the impact of a requirement for verification on such equipment are considered. Redundant circuits are examined and the characteristics which determine adaptability to verification are identified. Mutually exclusive and exhaustive categories for verification approaches are established. The range of applicability of these techniques is defined in terms of signal characteristics and redundancy features. Verification approaches are discussed and a methodology for the design of redundancy verification is developed. A case study is presented which involves the design of a verification system for a hypothetical communications system. Design criteria for redundant equipment are presented. Recommendations for the development of technological areas pertinent to the goal of increased verification capabilities are given.

Reaching Out.

ERIC Educational Resources Information Center

Porter, Randall C.

1999-01-01

Discusses technology and equipment requirements for developing an effective distance-learning classroom. Areas covered include cabling, the control booth, microphones, acoustics, lighting, heating and air conditioning, cameras, video monitors, staffing, and power requirements. (GR)

Development of a persistent chemical agent simulation system

NASA Technical Reports Server (NTRS)

1983-01-01

A Persistent Chemical Agent Simulation System was developed (PCASS) to simulate, for force-on-force training exercises, the field environment produced by the presence of persistent chemical agents. Such a simulant system must satisfy several requirements to be of value as a training aid. Specifically, it must provide for realistic training which will generate competency in at least the following areas: (1) detection of the persistent agent presence; (2) proper use of protective equipment and procedures; (3) determination of the extent of contamination; and (4) decontamination of equipment and personnel.

Effects of wearing different personal equipment on force distribution at the plantar surface of the foot.

PubMed

Schulze, Christoph; Lindner, Tobias; Woitge, Sandra; Finze, Susanne; Mittelmeier, Wolfram; Bader, Rainer

2013-01-01

The wearing of personal equipment can cause specific changes in muscle activity and posture. In the present study, we investigated the influence of differences in equipment related weight loading and load distribution on plantar pressure. In addition, we studied functional effects of wearing different equipment with a particular focus on relevant changes in foot shape. Static and dynamic pedobarography were performed on 31 male soldiers carrying increasing weights consisting of different items of equipment. The pressure acting on the plantar surface of the foot increased with higher loading, both under static and dynamic conditions (p < 0.05). We observed an increase in the contact area (p < 0.05) and an influence of load distribution through different ways to carry the rifle. The wearing of heavier weights leads to an increase in plantar pressure and contact area. This may be caused by flattening of the transverse and longitudinal arches. The effects are more evident in subjects with flat feet deformities which seem to flatten at an earlier load condition with a greater amount compared to subjects with normal arches. Improving load distribution should be a main goal in the development of military equipment in order to prevent injuries or functional disorders of the lower extremity.

TA-60-1 Heavy Equipment Shop Areas SWPPP Rev 2 Jan 2017-Final

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgin, Jillian Elizabeth

The primary activities and equipment areas at the facility that are potential stormwater pollution sources include; The storage of vehicles and heavy equipment awaiting repair; or repaired vehicles waiting to be picked up; The storage and handling of oils, anti-freeze, solvents, degreasers, batteries and other chemicals for the maintenance of vehicles and heavy equipment; and Equipment cleaning operations including exterior vehicle wash-down. Steam cleaning is only done on the steam cleaning pad area located at the north east end of Building 60-0001.

Recommendations for ground effects research for V/STOL and STOL aircraft and associated equipment for large scale testing

NASA Technical Reports Server (NTRS)

Kuhn, Richard E.

1986-01-01

The current understanding of the effects of ground proximity on V/STOL and STOL aircraft is reviewd. Areas covered include (1) single jet suckdown in hover, (2) fountain effects on multijet configurations, (3) STOL ground effects including the effect of the ground vortex flow field, (4) downwash at the tail, and (5) hot gas ingestion in both hover and STOL operation. The equipment needed for large scale testing to extend the state of the art is reviewed and developments in three areas are recommended as follows: (1) improve methods for simulating the engine exhaust and inlet flows; (2) develop a model support system that can simulate realistic rates of climb and descent as well as steady height operation; and (3) develop a blowing BLC ground board as an alternative to a moving belt ground board to properly simulate the flow on the ground.

Management of Electronic Test Equipment. Volume 4. DoD Policy.

DTIC Science & Technology

1986-07-01

sources of supply , the PIL should not mandate sole source dependenc . but rather limit the variety to a minimum of two items. To clarify the controversy...equipment/ supplies on-hand, equipment readiness, and training. The resource area C-ratings are based on stated criteria. The criteria for equipment...respectively). The UNITREP leaves it up to the Military Services whether to include test equipment in the equipment/ supplies on-hand resource area. Although

Federal Research and Development Funding: FY2017

DTIC Science & Technology

2016-06-24

facilities and equipment; does not include physical assets for R&D such as R&D equipment and facilities or routine product testing, quality control...multiagency R&D initiative to advance understanding and control of matter at the nanoscale, where the physical , chemical, and biological properties of...nuclear programs that dated back to the Manhattan Project. Today, DOE conducts basic scientific research in areas ranging from nuclear physics to the

Strategic Planning for Economic Development.

ERIC Educational Resources Information Center

Groff, Warren H.

The Ohio Task Force on High Technology (TFHT) was formed in 1982 to make recommendations in four areas: (1) the development of future scenarios for Ohio; (2) human resource development of providers and consumers of postsecondary educational services; (3) equipment and capital plan expenditures; and (4) implications of high technology for academic…

Feasibility of high recovery highwall mining equipment. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

Three equipment systems exhibited significant promise: the RSV Miner, a surface longwall using standard underground equipment, and the variable angle auger. Other equipment systems showing considerable merit were the surface shortwall, and the two extended depth augers. Of the three most significant systems, the RSV Miner exhibits the greatest versatility and adaptability. It may be used competently in many surface mining applications and readily adapts to geologic anomalies and changing seam heights. The machine employs steering and guidance equipment and provides the necessary capabilities for extended depth operation. Safety is good, as no men are required to work underground. However,more » most important is the system's recovery factor of approximately 75% to 80% of the in-situ coal reserve within reach. The surface longwall system using standard underground equipment (preferably a ranging drum shearer in conjunction with shield supports) is most suited to either a trench mining or a modified area mining application. Both applications would allow the length of the face to be held constant. Another important consideration is legal requirements for a tailgate entry, which would necessitate additional equipment for development in a modified area mining application. When compared to surface shortwall, surface longwall exhibits higher productivity, a far greater equipment selection which allows system tailoring to geologic conditions, and greater roof control due to the significantly smaller section of overburden that must be supported. Recovery should approach, and possibly exceed, 90% of the coal in-place. The variable angle auger, which is currently only a concept, fills a very real need for which no other equipment is available at this time.« less

Microgravity Science Glovebox (MSG)

NASA Technical Reports Server (NTRS)

1998-01-01

The Microgravity Science Glovebox is a facility for performing microgravity research in the areas of materials, combustion, fluids and biotechnology science. The facility occupies a full ISPR, consisting of: the ISPR rack and infrastructure for the rack, the glovebox core facility, data handling, rack stowage, outfitting equipment, and a video subsystem. MSG core facility provides the experiment developers a chamber with air filtering and recycling, up to two levels of containment, an airlock for transfer of payload equipment to/from the main volume, interface resources for the payload inside the core facility, resources inside the airlock, and storage drawers for MSG support equipment and consumables.

Microgravity

NASA Image and Video Library

1998-05-01

The Microgravity Science Glovebox is a facility for performing microgravity research in the areas of materials, combustion, fluids and biotechnology science. The facility occupies a full ISPR, consisting of: the ISPR rack and infrastructure for the rack, the glovebox core facility, data handling, rack stowage, outfitting equipment, and a video subsystem. MSG core facility provides the experiment developers a chamber with air filtering and recycling, up to two levels of containment, an airlock for transfer of payload equipment to/from the main volume, interface resources for the payload inside the core facility, resources inside the airlock, and storage drawers for MSG support equipment and consumables.

KSC-pa99dig02

NASA Image and Video Library

1999-02-17

Various materials are ready for testing in the Kennedy Space Center's cryogenics test bed laboratory. The cryogenics laboratory is expanding to a larger test bed facility in order to offer research and development capabilities that will benefit projects originating from KSC, academia and private industry. Located in KSC's industrial area, the lab is equipped with a liquid nitrogen flow test area to test and evaluate cryogenic valves, flow-meters and other handling equipment in field conditions. A 6,000-gallon tank supplies liquid to low-flow and high-flow test sections. KSC engineers and scientists can also build system prototypes and then field test and analyze them with the center's unique equipment. Expanded cryogenic infrastructure will posture the Space Coast to support biological and medical researchers who use liquid nitrogen to preserve and store human and animal cells and to destroy cancer tissue using cryosurgery; hospitals that use superconductive magnets cooled in liquid helium for magnetic resonance imaging (MRI); the food industry, which uses liquid nitrogen for freezing and long-term storage; as well as the next generation of reusable launch vehicles currently in development

KSC-pa99dig01

NASA Image and Video Library

1999-02-17

Materials are being tested in the Kennedy Space Center's cryogenics test bed laboratory. The cryogenics laboratory is expanding to a larger test bed facility in order to offer research and development capabilities that will benefit projects originating from KSC, academia and private industry. Located in KSC's industrial area, the lab is equipped with a liquid nitrogen flow test area to test and evaluate cryogenic valves, flow-meters and other handling equipment in field conditions. A 6,000-gallon tank supplies liquid to low-flow and high-flow test sections. KSC engineers and scientists can also build system prototypes and then field test and analyze them with the center's unique equipment. Expanded cryogenic infrastructure will posture the Space Coast to support biological and medical researchers who use liquid nitrogen to preserve and store human and animal cells and to destroy cancer tissue using cryosurgery; hospitals that use superconductive magnets cooled in liquid helium for magnetic resonance imaging (MRI); the food industry, which uses liquid nitrogen for freezing and long-term storage; as well as the next generation of reusable launch vehicles currently in development

Antenna design and development for the microwave subsystem experiments for the terminal configured vehicle project

NASA Technical Reports Server (NTRS)

Becher, J.; Cohen, N.; Rublee, J.

1981-01-01

The feasibility of classifying an airport terminal area for multipath effects, i.e., fadeout potentials or limits of video resolution, is examined. Established transmission links in terminal areas were modeled for landing approaches and overflight patterns. A computer program to obtain signal strength based on a described flight path was written. The application of this model to evaluate the signal transmission obtained in an actual flight equipped with additional signal strength monitoring equipment is described. The actual and computed received signal are compared, and the feasibility of the computer simulation for predicting signal amplitude fluctuation is evaluated.

Planning, expectation, and image evaluation for PACS at the University of Iowa Hospitals and Clinics

NASA Astrophysics Data System (ADS)

Franken, E. A., Jr.; Smith, Wilbur L.; Berbaum, Kevin S.; Owen, David A.; Hilsenrath, Peter

1990-08-01

Our strategy in studying PACS is to evaluate its clinical implementation working with equipment supplied by an established manufacturer. Fiscal and personnel resources required to design and integrate the hardware components and operational software to develop a functional PACS precluded a bottom up development approach at our institution. Imaging equipment vendors possess more abundant design development resources for this task and therefore can support a more rapid development of the initial components of PACS. For this reason we have chosen to serve as a beta test site to study the viability of the basic PACS components in a clinical setting. Our efforts primarily focus on: (1) image quality; (2) cost effectiveness; (3) PACS/HIS/RIS integration; (4) equipment and software reliability; and (5) overall system performance. The results of our studies are shared with the vendor for future PACS development and refi nement. To attain our investigational goals we have formed an interdisciplinary team of Radiologists, Perceptual Psychologist, Economist, Electrical and Industrial Engineers, Hospital Information System personnel and key departmental administrative staff. For several reasons Pediatric Radiology was targeted as the initial area for our PACS study: a small area representative of the overall operation,tight operational controls and willingness of physicians. We used a step-wise approach, the first step being the installation of PACS exclusively within the physical confines of Pediatric Radiology.

141. ARAIII Equipment location plan. Includes list of equipment and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

141. ARA-III Equipment location plan. Includes list of equipment and location in reactor, control, and other buildings. Aerojet-general 880-area/GCRE-101-U-1. Date: February 1958. Ineel index code no. 063-0101-65-013-192508. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Afghan National Engineer Brigade: Despite U.S. Training Efforts, the Brigade is Incapable of Operating Independently

DTIC Science & Technology

2016-01-01

carpentry, masonry , and the operation of heavy equipment. Plans called for the NEB to receive at least $29 million in engineering equipment and...JTF Sapper, NMCB 25, and NMCB 28, had responsibility for training the NEB in such areas as plumbing, electrical work, carpentry, masonry , and...measurement tool consisted of five possible ratings: fully capable, capable, partially capable, developing, and established. USFOR-A used these

Lunar-base construction equipment and methods evaluation

NASA Technical Reports Server (NTRS)

Boles, Walter W.; Ashley, David B.; Tucker, Richard L.

1993-01-01

A process for evaluating lunar-base construction equipment and methods concepts is presented. The process is driven by the need for more quantitative, systematic, and logical methods for assessing further research and development requirements in an area where uncertainties are high, dependence upon terrestrial heuristics is questionable, and quantitative methods are seldom applied. Decision theory concepts are used in determining the value of accurate information and the process is structured as a construction-equipment-and-methods selection methodology. Total construction-related, earth-launch mass is the measure of merit chosen for mathematical modeling purposes. The work is based upon the scope of the lunar base as described in the National Aeronautics and Space Administration's Office of Exploration's 'Exploration Studies Technical Report, FY 1989 Status'. Nine sets of conceptually designed construction equipment are selected as alternative concepts. It is concluded that the evaluation process is well suited for assisting in the establishment of research agendas in an approach that is first broad, with a low level of detail, followed by more-detailed investigations into areas that are identified as critical due to high degrees of uncertainty and sensitivity.

Cryogenics for superconductors: Refrigeration, delivery, and preservation of the cold

NASA Astrophysics Data System (ADS)

Ganni, Venkatarao; Fesmire, James

2012-06-01

Applications in superconductivity have become widespread, enabled by advancements in cryogenic engineering. In this paper, the history of cryogenic refrigeration, its delivery, its preservation and the important scientific and engineering advancements in these areas in the last 100 years will be reviewed, beginning with small laboratory dewars to very large scale systems. The key technological advancements in these areas that enabled the development of superconducting applications at temperatures from 4 to 77 K are identified. Included are advancements in the components used up to the present state-of-the-art in refrigeration systems design. Viewpoints as both an equipment supplier and the end-user with regard to the equipment design and operations will be presented. Some of the present and future challenges in these areas will be outlined. Most of the materials in this paper are a collection of the historical materials applicable to these areas of interest.

Cryogenics for superconductors: Refrigeration, delivery, and preservation of the cold

DOE Office of Scientific and Technical Information (OSTI.GOV)

Venkatarao Ganni, James Fesmire

Applications in superconductivity have become widespread, enabled by advancements in cryogenic engineering. In this paper, the history of cryogenic refrigeration, its delivery, its preservation and the important scientific and engineering advancements in these areas in the last 100 years will be reviewed, beginning with small laboratory dewars to very large scale systems. The key technological advancements in these areas that enabled the development of superconducting applications at temperatures from 4 to 77 K are identified. Included are advancements in the components used up to the present state-of-the-art in refrigeration systems design. Viewpoints as both an equipment supplier and the end-usermore » with regard to the equipment design and operations will be presented. Some of the present and future challenges in these areas will be outlined. Most of the materials in this paper are a collection of the historical materials applicable to these areas of interest.« less

Cryogenics for Superconductors: Refrigeration, Delivery, and Preservation of the Cold

NASA Technical Reports Server (NTRS)

Ganni, V.; Fesmire, J. E.

2011-01-01

Applications in superconductivity have become widespread, enabled by advancements in cryogenic engineering. In this paper, the history of cryogenic refrigeration, its delivery, its preservation and the important scientific and engineering advancements in these areas in the last 100 years will be reviewed, beginning with small laboratory dewars to very large scale systems. The key technological advancements in these areas that enabled the development of superconducting applications at temperatures from 4 to 77 K are identified. Included are advancements in the components used up to the present state-of-the-art in refrigeration systems design. Viewpoints as both an equipment supplier and the end-user with regard to the equipment design and operations will be presented. Some of the present and future challenges in these areas will be outlined. Most of the materials in this paper are a collection of the historical materials applicable to these areas of interest.

Tested Demonstrations.

ERIC Educational Resources Information Center

Gilbert, George L., Ed.

1980-01-01

Presented is a Corridor Demonstration which can be set up in readily accessible areas such as hallways or lobbies. Equipment is listed for a display of three cells (solar cells, fuel cells, and storage cells) which develop electrical energy. (CS)

Borman Expressway Atms Equipment Evaluation; Final Report

DOT National Transportation Integrated Search

1996-08-01

AN ADVANCED TRAFFIC MANAGEMENT SYSTEM (ATMS) IS UNDER DEVELOPMENT IN NORTHERN INDIANA BY THE INDIANA DEPARTMENT OF TRANSPORTATION (INDOT) IN CONJUNCTION WITH HUGHES TRANSPORTATION MANAGEMENT SYSTEMS. THE STUDY AREA COMPRISES A SIXTEEN MILE SEGMENT OF...

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Geriatric Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This task analysis for nursing education provides performance standards, steps to be followed, knowledge required, attitudes to be developed, safety procedures, and equipment and supplies needed for 13 tasks performed by geriatric aides in the duty area of performing diagnostic measures and for 30 tasks in the duty area of providing therapeutic…

Business Use of Small Computers in the Salt Lake City, Utah Area.

ERIC Educational Resources Information Center

Homer, Michael M.

In July 1981, Utah Technical College (UTC) conducted a survey of businesses in the Salt Lake City area to gather information for the development of a curriculum integrating computer applications with business course instruction. The survey sought to determine the status and usage of current micro/mini computer equipment, future data processing…

Teacher workshop

NASA Image and Video Library

2012-10-20

John C. Stennis Space Center educators and area teachers partnered together during a professional development workshop Oct. 20 to learn about the LEGO Bricks in Space curriculum issued by NASA. The curriculum is designed to encourage students in areas of science, technology, engineering and mathematics. The Stennis Space Center Educator Resource Center hosted the workshop to equip teachers of grades 3-12.

Low-cost solar array project and Proceedings of the 15th Project Integration Meeting

NASA Technical Reports Server (NTRS)

1980-01-01

Progress made by the Low-Cost Solar Array Project during the period December 1979 to April 1980 is described. Project analysis and integration, technology development in silicon material, large area silicon sheet and encapsulation, production process and equipment development, engineering, and operation are included.

7 CFR 1822.263 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... agency of a State or local government. (c) Rural area is open country or rural places as defined in 7 CFR part 3550, subpart A. (d) Development cost means the cost of purchasing and developing the sites..., necessary equipment and estimated interest which the borrower cannot pay from other sources. (e) RHS section...

Development of educational image databases and e-books for medical physics training.

PubMed

Tabakov, S; Roberts, V C; Jonsson, B-A; Ljungberg, M; Lewis, C A; Wirestam, R; Strand, S-E; Lamm, I-L; Milano, F; Simmons, A; Deane, C; Goss, D; Aitken, V; Noel, A; Giraud, J-Y; Sherriff, S; Smith, P; Clarke, G; Almqvist, M; Jansson, T

2005-09-01

Medical physics education and training requires the use of extensive imaging material and specific explanations. These requirements provide an excellent background for application of e-Learning. The EU projects Consortia EMERALD and EMIT developed five volumes of such materials, now used in 65 countries. EMERALD developed e-Learning materials in three areas of medical physics (X-ray diagnostic radiology, nuclear medicine and radiotherapy). EMIT developed e-Learning materials in two further areas: ultrasound and magnetic resonance imaging. This paper describes the development of these e-Learning materials (consisting of e-books and educational image databases). The e-books include tasks helping studying of various equipment and methods. The text of these PDF e-books is hyperlinked with respective images. The e-books are used through the readers' own Internet browser. Each Image Database (IDB) includes a browser, which displays hundreds of images of equipment, block diagrams and graphs, image quality examples, artefacts, etc. Both the e-books and IDB are engraved on five separate CD-ROMs. Demo of these materials can be taken from www.emerald2.net.

10 CFR 835.1101 - Control of material and equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

....1101 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radioactive Contamination Control... section, material and equipment in contamination areas, high contamination areas, and airborne radioactivity areas shall not be released to a controlled area if: (1) Removable surface contamination levels on...

47 CFR 80.1093 - Ship radio equipment-Sea areas A1, A2, A3, and A4.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Ship radio equipment-Sea areas A1, A2, A3, and... AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS) Equipment Requirements for Ship Stations § 80.1093 Ship radio equipment—Sea areas A1, A2...

Southwest Research Institute assistance to NASA in biomedical areas of the technology utilization program

NASA Technical Reports Server (NTRS)

1973-01-01

Applications of aerospace technology to biomedical science are described. Recent research and development of specific techniques, services, and equipment adopted by physicians to help combat disease and disability are reviewed.

Legacy of the Space Shuttle Program

NASA Technical Reports Server (NTRS)

Sullivan, Steven J.

2010-01-01

This slide presentation reviews many of the innovations from Kennedy Space Center engineering for ground operations that were made during the shuttle program. The innovations are in the areas of detection, image analysis, protective equipment, software development and communications.

Consolidated fuel reprocessing program

NASA Astrophysics Data System (ADS)

1985-02-01

Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

ALPHA SMP SYSTEM(S) Final Report CRADA No. TC-1404-97

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seager, M.; Beaudet, T.

Within the scope of this subcontract, Digital Equipment Corporation (DIGITAL) and the University, through the Lawrence Livermore National Laboratory (LLNL), engaged in joint research and development activities of mutual interest and benefit. The primary objectives of these activities were, for LLNL to improve its capability to perform its mission, and for DIGITAL to develop technical capability complimentary to this mission. The collaborative activities had direct manpower investments by DIGITAL and LLNL. The project was divided into four areas of concern, which were handled concurrently. These areas included Gang Scheduling, Numerical Methods, Applications Development and Code Development Tools.

Business and Management Development Training Program for Hispanic Women. Final Report.

ERIC Educational Resources Information Center

Miranda (L.) and Associates, Bethesda, MD.

A program was conducted to develop and motivate minority women, in particular Hispanic origin women, in the Washington, D.C., metropolitan area to participate in business ownership and management. Offered at no cost to participants, the training program sought to equip potential managers with information and techniques in the fundamental…

Rotarians Respond to the Recreation Rights of Disabled Individuals in Mesa, Arizona.

ERIC Educational Resources Information Center

Bliss, George, II; And Others

1983-01-01

Presents Rotary Park in Mesa (Arizona), designed to be accessible to the disabled and developed by the Mesa Rotary Club, the city parks and recreation department, and county and federal agencies. Describes the park's origins, development, and special recreational equipment, including a physical fitness trail and multipurpose playing areas. (RW)

Gymnasium Makeovers.

ERIC Educational Resources Information Center

Holzrichter, Doug

2001-01-01

Discusses improving old gyms to enhance the experience of players and spectators while still respecting the gym's historical significance. Planning and design development phases are examined covering such areas as creating multipurpose courts, building stages, and considerations concerning lighting, acoustics, interior finishes, equipment,…

Aerial Radiological Measuring System (ARMS): systems, procedures and sensitivity (1976)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyns, P K

1976-07-01

This report describes the Aerial Radiological Measuring System (ARMS) designed and operated by EG and G, Inc., for the Energy Research and Development Administration's (ERDA) Division of Operational Safety with the cooperation of the Nuclear Regulatory Commission. Designed to rapidly survey large areas for low-level man-made radiation, the ARMS has also proven extremely useful in locating lost radioactive sources of relatively low activity. The system consists of sodium iodide scintillation detectors, data formatting and recording equipment, positioning equipment, meteorological instruments, direct readout hardware, and data analysis equipment. The instrumentation, operational procedures, data reduction techniques and system sensitivities are described, togethermore » with their applications and sample results.« less

ATLAS experimental equipment. November 1983 workshop and present status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-01-01

The latest workshop was held in November 1983 with the purpose of presenting an overview of the experimental stations planned for ATLAS, describing the current status of each individual apparatus, soliciting final input on devices of the first phase (i.e. on those that will be ready when beams from ATLAS become available in late Spring of 1985), and discussing and collecting new ideas on equipment for the second phase. There were short presentations on the status of the various projects followed by informal discussions. The presentations mainly concentrated on new equipment for target area III, but included some descriptions ofmore » current apparatus in target area II that might also be of interest for experiments with the higher-energy beams available in area III. The meeting was well attended with approx. 50 scientists, approximately half of them from institutions outside Argonne. The present proceedings summarize the presentations and discussions of this one-day meeting. In addition we take the opportunity to include information about developments since this meeting and an update of the current status of the various experimental stations. We would like to emphasize again that outside-user input is extremely welcome.« less

30 CFR 77.403-1 - Mobile equipment; rollover protective structures (ROPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... WORK AREAS OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.403-1 Mobile equipment... surface coal mines or the surface work areas of underground coal mines shall be provided with rollover... complying with paragraph (d) (1) (iii) (A) of this section. Stresses shall not exceed the ultimate strength...

30 CFR 77.403-1 - Mobile equipment; rollover protective structures (ROPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... WORK AREAS OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.403-1 Mobile equipment... surface coal mines or the surface work areas of underground coal mines shall be provided with rollover... complying with paragraph (d) (1) (iii) (A) of this section. Stresses shall not exceed the ultimate strength...

Educators Guide for Budgeting School Equipment. Second Annual Edition.

ERIC Educational Resources Information Center

Dawson, Joseph L.; Schmidt, James R.

A publication designed to assist the administrator or department head in the critical area of budgeting school equipment provides a comprehensive guide drawn from hundreds of sources covering all areas of capital equipment. Each section is prefaced with suggestions as to how the items described may be most efficiently utilized. The guide is also…

The Role of Civilians in Maintaining Military Equipment. Volume 2,

DTIC Science & Technology

1985-12-01

construction , combat vehicles, communications-electronics, audio-visual and training, general equipment, commodity groups, and weapons/armament...commodity areas are of interest. These five commodity areas are automotive, construction , combat vohicles. communications-electronics, and weapons...assigned DS/GS maintenance missions for automotive, construction , and communications- electronics equipment. None has been assigned weapons/armament missions

Excavating and loading equipment for peat mining

NASA Astrophysics Data System (ADS)

Mikhailov, A. V.; Zhigulskaya, A. I.; Yakonovskaya, T. B.

2017-10-01

Recently, the issues of sustainable development of Russian regions, related to ensuring energy security, are more urgent than ever. To achieve sustainable development, an integrated approach to the use of local natural resources is needed. Practically in all north regions of the Russian Federation, peat as a local natural resource is widespread, which has a practical application in the area of housing services. The paper presents the evaluation of technologies for open-pit peat mining, as well as analysis of technological equipment for peat production. Special attention is paid to a question of peat materials excavating and loading. The problem of equipment selection in a peat surface mine is complex. Many features, restrictions and criteria need to be considered. Use of low and ultra-low ground pressure excavators and low ground pressure front-end loaders with full-range tires to provide the necessary floatation in the peat bog environment is offered.

System of Earthquakes Alert (SEA) on the territory of Bulgaria developed as a result of DACEA project

NASA Astrophysics Data System (ADS)

Solakov, Dimcho; Dimitrova, Liliya; Simeonova, Stela; Aleksandrova, Irena; Stoyanov, Stoyan; Metodiev, Metodi

2013-04-01

The prevention of the natural disasters and the performing management of reactions to crisis are common problems for many countries. The Romania-Bulgaria border region is significantly affected by earthquakes occurred in both territories: on the one-hand, Vrancea seismic source, with intermediate-depth events and on the other hand, crustal seismicity recorded in the northern part of Bulgaria (Shabla, Dulovo, Gorna Orjahovitza). The general objective of DACEA (2010-2013) project is to develop an system of earthquake alert in order to prevent the natural disasters caused by earthquakes in the cross-border area, taking into account the nuclear power plants and other chemical plants located along the Danube on the territories of Romania and Bulgaria. An integrated warning system is designed and implemented in the cross-border area. A seismic detection network is put in operation in order to warn the bodies in charge with emergency situations management in case of seismic danger. The main purpose of this network is: • monitoring of the four seismogenic areas relevant for the cross-border area, in order to detect dangerous earthquakes • sending the seismic warning signals within several seconds to the local public authorities in the cross-border area On the territory of Bulgaria the seismic network belonging to SEA is consists of: • 8 seismic stations equipped with Basalt digitizer, accelerometer Epi-sensor and BB seismometer KS2000. • 8 seismic stations equipped with Basalt digitizer, accelerometer Epi-sensor, warning and visual monitoring equipment. The stations are spanned allover the North Bulgaria. The sites were thoroughly examined and the most important requirement was the low level of noise or vibrations. SEA centers were established both in Sofia (in National Institute of Geophysics, Geodesy and Geography - NIGGG) and Bucharest (in National Institute of Research and Development for Earth Physics). Both centers are equipped with servers for data analyses and storage. Specialized software for elaboration of scenarios of seismic hazard is designed and implemented. The reaction of buildings, roads, bridges, land etc. to earthquakes is graphically shown on the monitor. The high risk areas are highlighted in order for the emergency units to be prepared for intervention. This software is designed on the base of a comprehensive relational data base of historical and contemporary seismicity in the cross-border region. The output shake maps and scenarios are to be used by the emergency intervention units, local public authorities and for general public awareness.

Mechanical recycling of waste electric and electronic equipment: a review.

PubMed

Cui, Jirang; Forssberg, Eric

2003-05-30

The production of electric and electronic equipment (EEE) is one of the fastest growing areas. This development has resulted in an increase of waste electric and electronic equipment (WEEE). In view of the environmental problems involved in the management of WEEE, many counties and organizations have drafted national legislation to improve the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. Recycling of WEEE is an important subject not only from the point of waste treatment but also from the recovery of valuable materials.WEEE is diverse and complex, in terms of materials and components makeup as well as the original equipment's manufacturing processes. Characterization of this waste stream is of paramount importance for developing a cost-effective and environmentally friendly recycling system. In this paper, the physical and particle properties of WEEE are presented. Selective disassembly, targeting on singling out hazardous and/or valuable components, is an indispensable process in the practice of recycling of WEEE. Disassembly process planning and innovation of disassembly facilities are most active research areas. Mechanical/physical processing, based on the characterization of WEEE, provides an alternative means of recovering valuable materials. Mechanical processes, such as screening, shape separation, magnetic separation, Eddy current separation, electrostatic separation, and jigging have been widely utilized in recycling industry. However, recycling of WEEE is only beginning. For maximum separation of materials, WEEE should be shredded to small, even fine particles, generally below 5 or 10mm. Therefore, a discussion of mechanical separation processes for fine particles is highlighted in this paper. Consumer electronic equipment (brown goods), such as television sets, video recorders, are most common. It is very costly to perform manual dismantling of those products, due to the fact that brown goods contain very low-grade precious metals and copper. It is expected that a mechanical recycling process will be developed for the upgrading of low metal content scraps.

Nursing Care Hour Standards Study. Part 5 thru Part 8

DTIC Science & Technology

1981-09-01

undressing, into shower, with bath and hair shampoo , assist in redressing, and back into the wheelchair. (Must remain with patient and provide assistance...from area. (Buttocks, hips, shoulders , heels.) BACK RUB: Place equipment at patient’s bedside, remove pajama top, 1 turn patient to expose back, rub back...NAIL CARE: Place equipment at bedside, wash hands/feet and 1 nails, trim and clean finger/toe nails, remove equipment from area. SHAMPOO : Place equipment

RESEARCH AND DEVELOPMENT ON ADVANCED GRAPHITE MATERIALS. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-04-01

A review is given of activities over the period October 15, 1960 to October 15, 1961 on a three year program for the research and development of materials, experimental techniques, and equipment for development of premium quality, reproducible graphite-base materials suitable for missile and astronautic applications. Progress is reported on research and development in the study areas of raw materials, fabrication, and material characterization and evaluation. (auth)

Leadership scheme to develop the careers of talented candidates.

PubMed

Lynas, Karen

2012-02-01

The Top Leaders programme supports career development by identifying talented staff and equipping them with a range of management skills and approaches. The programme uses a diagnostic test to help candidates assess their strengths, leadership styles and development needs, and offers them 360 degrees feedback. This enables them to identify areas they need to develop to be effective and supportive leaders. Two case studies illustrate the programme in action.

GSFC contamination monitors for Space Station

NASA Technical Reports Server (NTRS)

Carosso, P. A.; Tveekrem, J. L.; Coopersmith, J. D.

1988-01-01

This paper describes the Work Package 3 activities in the area of neutral contamination monitoring for the Space Station. Goddard Space Flight Center's responsibilities include the development of the Attached Payload Accommodations Equipment (APAE), the Polar Orbiting Platform (POP), and the Flight Telerobotic Servicer (FTS). GSFC will also develop the Customer Servicing Facility (CSF) in Phase 2 of the Space Station.

Interior, equipment room, weather support area (from July, 1968 drawing) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior, equipment room, weather support area (from July, 1968 drawing) at north end of display area, looking west. Window looks south towards the main console - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

USSR Report Machine Tools and Metalworking Equipment

DTIC Science & Technology

1986-01-24

meat -packing plants). In the past, the main emphasis on finished products in individual areas slowed down development and modernization, as well as...social effect . Also related to further improvement in the microelectronic base, micro and minicomputers is development work on the creation of a...more effectively as well as those being built; develop scientific technological and production cooperation; use achievements obtained as a result of

Education as a Gateway to Development: Case of Rural Poor at Thabaneng Village in Lesotho

ERIC Educational Resources Information Center

Matsepe, Mokone W.

2015-01-01

The study explores and unfolds the purpose of education in general, its value and the role it plays in helping development of the people in rural areas especially at Thabaneng Village in Lesotho. It reveals that education is the key to development and functions to equip the rural population in Lesotho with knowledge, training and worthwhile skills…

77 FR 61471 - Environmental Impact Statement: Travis County, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... Drive. The project is listed in the Capital Area Metropolitan Planning Organization (CAMPO) 2035... space, historic preservation, reduced carbon emissions, increased social equity, economic development... equipment and operation of the roadway; social and economic impacts, including impacts to minority and low...

Internal dosimetry monitoring equipment: Present and future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selby, J.; Carbaugh, E.H.; Lynch, T.P.

1993-09-01

We have attempted to characterize the current and future status of in vivo and in vitro measurement programs coupled with the associated radioanalytical methods and workplace monitoring. Developments in these areas must be carefully integrated by internal dosimetrists, radiochemists and field health physicists. Their goal should be uniform improvement rather than to focus on one specific area (e.g., dose modeling) to the neglect of other areas where the measurement capabilities are substantially less sophisticated and, therefore, the potential source of error is greatest.

Space Construction Automated Fabrication Experiment Definition Study (SCAFEDS). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1978-01-01

The techniques, processes, and equipment required for automatic fabrication and assembly of structural elements in space using the space shuttle as a launch vehicle and construction base were investigated. Additional construction/systems/operational techniques, processes, and equipment which can be developed/demonstrated in the same program to provide further risk reduction benefits to future large space systems were included. Results in the areas of structure/materials, fabrication systems (beam builder, assembly jig, and avionics/controls), mission integration, and programmatics are summarized. Conclusions and recommendations are given.

Extravehicular Crewman Work System (ECWS) study program. Volume 3: Satellite service

NASA Technical Reports Server (NTRS)

Wilde, R. C.

1980-01-01

The satellite service portion of the Extravehicular Crewman Work System Study defines requirements and service equipment concepts for performing satellite service from the space shuttle orbiter. Both normal and contingency orbital satellite service is required. Service oriented satellite design practices are required to provide on orbit satellite service capability for the wide variety of satellites at the subsystem level. Development of additional satellite service equipment is required. The existing space transportation system provides a limited capability for performing satellite service tasks in the shuttle payload bay area.

Education kits for fiber optics, optoelectronics, and optical communications

NASA Astrophysics Data System (ADS)

Hájek, Martin; Švrček, Miroslav

2007-04-01

Our company MIKROKOM, s.r.o. is engaged for many years in development of education equipment and kits for fiber optics, optoelectronics and optical communications. We would like to inform competitors of conference about results of this long-time development. Requirements on education kits and equipment in a modern and dynamic area as is optical communications and fiber optics are quite difficult. The education kits should to clearly introduce students to given issue - the most important physical principles and technical approaches, but it should to introduce also to new and modern technologies, which are quickly changing and developing. On the other hand should be these tools and kits reasonable for the schools. In our paper we would like to describe possible ways of development of this education kits and equipment and present our results of long-time work, which covers very wide range. On the one hand we developed equipment and kits for clear demonstration of physical effects using plastic optical fibers POF, next we prepare kits with a glass fibers, which are the most used fibers in practice and after as much as the kits, which covers broad range of passive and active elements of the optical networks and systems and which makes possible to create complex optical transmission connection. This kind of systems with using corresponding tools and equipment introduce the students to properties, manipulation, measurement and usage of optical fibers, traces and many active and passive components. Furthermore, with using different sorts of optical sources, photodetectors, fiber optics couplers etc., students can get acquainted with all optoelectronics transmission system, which uses different sorts of signals. Special part will be devoted also to effort mentioned before - to implement modern technologies such as e.g. Wavelength Division Multiplex (WDM) into the education kits. Our presentation will inform auditors about development of mentioned education kits and equipment and about their potentials and practical utility at school education.

49 CFR 195.430 - Firefighting equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Firefighting equipment. 195.430 Section 195.430... PIPELINE Operation and Maintenance § 195.430 Firefighting equipment. Each operator shall maintain adequate firefighting equipment at each pump station and breakout tank area. The equipment must be— (a) In proper...

Employer Manpower Needs and Job Entry Requirements for Biomedical Equipment Technican (Primarily Metropolitan Kansas City).

ERIC Educational Resources Information Center

Tatham, Elaine L.; And Others

This report details the findings of a study conducted to assess area employer manpower needs and job entry requirements for biomedical equipment technicians. Fifty usable responses to a survey were obtained, 20 from biomedical equipment technicians and 30 from employers. Results of the survey indicated that job vacancies did exist in the area,…

The historical development and basis of human factors guidelines for automated systems in aeronautical operations

NASA Technical Reports Server (NTRS)

Ciciora, J. A.; Leonard, S. D.; Johnson, N.; Amell, J.

1984-01-01

In order to derive general design guidelines for automated systems a study was conducted on the utilization and acceptance of existing automated systems as currently employed in several commercial fields. Four principal study area were investigated by means of structured interviews, and in some cases questionnaires. The study areas were aviation, a both scheduled airline and general commercial aviation; process control and factory applications; office automation; and automation in the power industry. The results of over eighty structured interviews were analyzed and responses categoried as various human factors issues for use by both designers and users of automated equipment. These guidelines address such items as general physical features of automated equipment; personnel orientation, acceptance, and training; and both personnel and system reliability.

Spacecraft platform cost estimating relationships

NASA Technical Reports Server (NTRS)

Gruhl, W. M.

1972-01-01

The three main cost areas of unmanned satellite development are discussed. The areas are identified as: (1) the spacecraft platform (SCP), (2) the payload or experiments, and (3) the postlaunch ground equipment and operations. The SCP normally accounts for over half of the total project cost and accurate estimates of SCP costs are required early in project planning as a basis for determining total project budget requirements. The development of single formula SCP cost estimating relationships (CER) from readily available data by statistical linear regression analysis is described. The advantages of single formula CER are presented.

Policy Review of the Primary and Junior Secondary Education Sub-Sectors in East Java. Educational Policy and Planning Project. A Government of Indonesia-USAID Project.

ERIC Educational Resources Information Center

Soebagio, Retno L.; And Others

Indonesian representatives and the Educational Research and Development Center studied East Javanese primary and junior secondary schools to develop a database for future planning and to identify deficiencies, constraints, and areas for fruitful reform. Issues of enrollment, personnel, curriculum, facilities and equipment, cost, and financing were…

Energy Systems Test Area (ESTA). Power Systems Test Facilities

NASA Technical Reports Server (NTRS)

Situ, Cindy H.

2010-01-01

This viewgraph presentation provides a detailed description of the Johnson Space Center's Power Systems Facility located in the Energy Systems Test Area (ESTA). Facilities and the resources used to support power and battery systems testing are also shown. The contents include: 1) Power Testing; 2) Power Test Equipment Capabilities Summary; 3) Source/Load; 4) Battery Facilities; 5) Battery Test Equipment Capabilities Summary; 6) Battery Testing; 7) Performance Test Equipment; 8) Battery Test Environments; 9) Battery Abuse Chambers; 10) Battery Abuse Capabilities; and 11) Battery Test Area Resources.

Not just a rural occurrence: differences in agricultural equipment crash characteristics by rural-urban crash site and proximity to town.

PubMed

Harland, Karisa K; Greenan, Mitchell; Ramirez, Marizen

2014-09-01

Although approximately one-third of agricultural equipment-related crashes occur near town, these crashes are thought to be a rural problem. This analysis examines differences between agricultural equipment-related crashes by their urban-rural distribution and distance from a town. Agricultural equipment crashes were collected from nine Midwest Departments of Transportation (2005-2008). Crash zip code was assigned as urban or rural (large, small and isolated) using Rural-Urban Commuting Areas. Crash proximity to a town was estimated with ArcGIS. Multivariable logistic regression was used to estimate the odds of crashing in an urban versus rural zip codes and across rural gradients. ANOVA analysis estimated mean distance (miles) from a crash site to a town. Over four years, 4444 crashes involved agricultural equipment. About 30% of crashes occurred in urban zip codes. Urban crashes were more likely to be non-collisions (aOR=1.69[1.24-2.30]), involve ≥2 vehicles (2 vehicles: aOR=1.58[1.14-2.20], 3+ vehicles: aOR=1.68[0.98-2.88]), occur in a town (aOR=2.06[1.73-2.45]) and within one mile of a town (aOR=1.65[1.40-1.95]) than rural crashes. The proportion of crashes within a town differed significantly across rural gradients (P<0.0001). Small rural crashes, compared to isolated rural crashes, were 1.98 (95%CI[1.28-3.06]) times more likely to be non-collisions. The distance from the crash to town differed significantly by the urban-rural distribution (P<0.0001). Crashes with agricultural equipment are unexpectedly common in urban areas and near towns and cities. Education among all roadway users, increased visibility of agricultural equipment and the development of complete rural roads are needed to increase road safety and prevent agricultural equipment-related crashes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Stormwater Pollution Prevention Plan for the TA-60-01 Heavy Equipment Shop, Los Alamos National Laboratory, Revision 3, January 2018

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgin, Jillian Elizabeth

This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-60-01 Heavy Equipment Shop at Los Alamos National Laboratory. Los Alamos Nationalmore » Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60-01 Heavy Equipment Shop and associated areas. The current permit expires at midnight on June 4, 2020.« less

Ringling School of Art and Design Builds a CASTLE.

ERIC Educational Resources Information Center

Morse, Yvonne; Davis, Wendy

1984-01-01

Describes the development and installation of the Computer Automated Software for the Total Library Environment System (CASTLE), which uses a microcomputer to automate operations of small academic library in six main areas: circulation, online catalog, inventory and file maintenance, audiovisual equipment, accounting, and information and…

ZVI-CLAY SOIL MIXING TREATS DNAPL SOURCE AREA AT 35-FOOT DEPTH

EPA Science Inventory

The DuPont Company and Colorado State University (CSU) are collaborating in development and refinement of a technology that involves in-situ admixing of contaminated soil, granular zero valent iron (ZVI), and clay using conventional soil mixing equipment. A full-scale application...

IET control building (TAN620). interior service area. equipment on concrete ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

IET control building (TAN-620). interior service area. equipment on concrete pads. liquid pump and valves on right. control panel at center of view, blower at left. piping for vent and sanitary sewer. INEEL negative no. HD-21-3-1 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Paralympic sports medicine--current evidence in winter sport: considerations in the development of equipment standards for paralympic athletes.

PubMed

Burkett, Brendan

2012-01-01

To highlight and discuss the considerations for the future development of equipment standards for Winter Paralympic sports. Literature searches were performed (in English) during May 2011 using the key words "technology, winter sport, Olympic, and Paralympic" in the computerized databases PubMed, PsycINFO, Science Direct, and Google Scholar. In addition, personal scientific observations were made at several Winter Paralympic Games. The retrieved articles were screened and assessed for relevance to the biological, biomechanical, and sport medicine aspects of equipment. There are 3 key areas in which technology has influenced sports performance in Paralympic winter sports, namely, specialized prostheses, crutch skis or outriggers (in lieu of poles), and sport-specific wheelchairs (such as the sit-ski). From a sport medicine perspective, a crucial factor not considered in the standard laboratory test of mechanical efficiency is the influence of the human-equipment connection, such as the stump-to-prosthesis interface or the required human-to-wheelchair control. This connectivity is critical to the effective operation of the assistive device. When assessing the efficiency of this equipment, the not-so-obvious, holistic, compensatory factors need to be considered. Assistive equipment is fundamental for a person with a disability to participate and compete in winter sport activities. Although there have been improvements in the mechanical function of some assistive devices, the key issue is matching the residual function of the person with the assistive equipment. Equitable access to this technology will also ensure that the fundamental spirit of fair play that underpins the Paralympic Games is maintained.

Radiation applications research and facilities in AECL research company

NASA Astrophysics Data System (ADS)

Iverson, S. L.

In the 60's and 70's Atomic Energy of Canada had a very active R&D program to discover and develop applications of ionizing radiation. Out of this grew the technology underlying the company's current product line of industrial irradiators. With the commercial success of that product line the company turned its R&D attention to other activities. Presently, widespread interest in the use of radiation for food processing and the possibility of developing reliable and competitive machine sources of radiation hold out the promise of a major increase in industrial use of radiation. While many of the applications being considered are straightforward applications of existing knowledge, others depend on more subtle effects including combined effects of two or more agents. Further research is required in these areas. In March 1985 a new branch, Radiation Applications Research, began operations with the objective of working closely with industry to develop and assist the introduction of new uses of ionizing radiation. The Branch is equipped with appropriate analytical equipment including HPLC (high performance liquid chromatograph) and GC/MS (gas chromatograph/mass spectrometer) as well as a Gammacell 220 and an I-10/1, one kilowatt 10 MeV electron accelerator. The accelerator is located in a specially designed facility equipped for experimental irradiation of test quantities of packaged products as well as solids, liquids and gases in various configurations. A conveyor system moves the packaged products from the receiving area, through a maze, past the electron beam at a controlled rate and finally to the shipping area. Other necessary capabilities, such as gamma and electron dosimetry and a microbiology laboratory, have also been developed. Initial projects in areas ranging from food through environmental and industrial applications have been assessed and the most promising have been selected for further work. As an example, the use of charcoal adsorbent beds to concentrate the components of gas or liquid waste streams requiring treatment is showing promise as a method of significantly reducing the cost of radiation treatment for some effluents. A number of other projects are described.

Fluid flow electrophoresis in space

NASA Technical Reports Server (NTRS)

Griffin, R. N.

1975-01-01

Four areas relating to free-flow electrophoresis in space were investigated. The first was the degree of improvement over earthbound operations that might be expected. The second area of investigation covered the problems in developing a flowing buffer electrophoresis apparatus. The third area of investigation was the problem of testing on the ground equipment designed for use in space. The fourth area of investigation was the improvement to be expected in space for purification of biologicals. The results of some ground-based experiments are described. Other studies included cooling requirements in space, fluid sealing techniques, and measurement of voltage drop across membranes.

Terrain, weather pose challenges in Minnesota project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trojack, L.

1994-12-01

This paper briefly reviews an innovative method used in installing a natural gas pipeline in Minnesota which traversed a marsh area. Because of the special problems associated with this wetland area, special equipment and techniques had to be used to minimize disturbance associated with the construction. It describes the equipment and the resulting performance the equipment had. It proved to significantly reduce disturbance and result in minimum site restoration work.

Effectiveness of restraint equipment in enclosed areas.

DOT National Transportation Integrated Search

1972-02-01

A series of 20-g decelerations of a crash sled was conducted to determine the magnitude of head impact decelerations while wearing various types of restraint equipment in small confined areas. Restraint webbing loads and head impact decelerations are...

Large-Scale Cryogenic Testing of Launch Vehicle Ground Systems at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Ernst, E. W.; Sass, J. P.; Lobemeyer, D. A.; Sojourner, S. J.; Hatfield, W. H.; Rewinkel, D. A.

2007-01-01

The development of a new launch vehicle to support NASA's future exploration plans requires significant redesign and upgrade of Kennedy Space Center's (KSC) launch pad and ground support equipment systems. In many cases, specialized test equipment and systems will be required to certify the function of the new system designs under simulated operational conditions, including propellant loading. This paper provides an overview of the cryogenic test infrastructure that is in place at KSC to conduct development and qualification testing that ranges from the component level to the integrated-system level. An overview of the major cryogenic test facilities will be provided, along with a detailed explanation of the technology focus area for each facility

46 CFR 154.1430 - Equipment locker.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In the...

46 CFR 154.1430 - Equipment locker.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In the...

46 CFR 154.1430 - Equipment locker.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In the...

46 CFR 154.1430 - Equipment locker.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In the...

46 CFR 154.1430 - Equipment locker.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In the...

Developing Best Practices: System-wide Actions for Coastal Resilience

DTIC Science & Technology

2015-10-09

solutions for a safer, better world flooding and major storms in low-lying areas 6 10/9/2015 3 Bayville and Breezy Point, NY - Protocol to move emergency...vehicles and debris removal equipment to high ground before flooding . Best Practices: Examples BUILDING STRONG® Innovative solutions for a safer

Teams, Networks, and Assistive Technology: Training Special Educators in Rural Areas.

ERIC Educational Resources Information Center

Henderson, Cheryl; Kyger, Maggie; Guarino-Murphey, Dana

Assistive technology is equipment that improves the functional capabilities of individuals with disabilities. Using assistive technology, children discover they have control over their environment and develop a sense of competence and independence. As special education enrollments increase, more students are using assistive technology, but many…

Fishing. Unit 1, Colorado Division of Wildlife.

ERIC Educational Resources Information Center

Hetzel, George K.; Smith, Dwight R.

This booklet on fishing is part of a series developed to encourage youth to pursue outdoor projects. Fish anatomy, equipment, casting techniques, knot and leader tying, hooks, fishing areas, cleaning and cooking fish, types of bait, lures, and regulations are discussed and illustrated. Suggested activities and field trips are listed. (MR)

Reading Outside Micrometers. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Sommer, Sandra; And Others

This courseware evaluation rates the Reading Outside Micrometers program developed by EMC Publishing Company. (The program--not contained in this document--uses high resolution graphics to illustrate the micrometer's components, functions, and practical applications.) Part A describes the program in terms of subject area and equipment requirements…

33 CFR 154.735 - Safety requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... protective equipment is ready to operate. (g) Signs indicating that smoking is prohibited are posted in areas where smoking is not permitted. (h) Trucks and other motor vehicles are operated or parked only in... no other duties except to watch for the presence of fire and to prevent the development of hazardous...

Solar Energy in the School Curriculum: Giving New Life to Old Science.

ERIC Educational Resources Information Center

Hibbert, Oliver D.

1984-01-01

Describes some simple solar energy experiments, reviews real life examples of solar energy, and lists areas where solar energy can fit into existing school science curricula. Instructions for making equipment needed, a discussion of recent developments in thermal systems and photovoltaics, and a bibliography are included. (JN)

Y2K for Librarians: Exactly What You Need To Do.

ERIC Educational Resources Information Center

Doering, William

1999-01-01

Addresses how libraries can prepare for Y2K problems. Discusses technology that might be affected and equipment that should be examined, difficulty of fixing noncompliant hardware and software, identifying problem areas and developing solutions, and dealing with vendors. Includes a checklist of necessary preparations. (AEF)

Proceedings of the NASA/Florida Institute of Technology Environmental Engineering Conference on Nitrogen Tetroxide. [with emphasis on space shuttle

NASA Technical Reports Server (NTRS)

Rhodes, E. L.

1978-01-01

Methods of reducing the user hazards of nitrogen tetroxide, a hypergolic oxidizer are discussed. Kennedy Space Center developments in N2O4 control for the space shuttle are featured. Other areas covered are life support equipment and transportation.

A Portable Presentation Package for Audio-Visual Instruction. Technical Documentary Report.

ERIC Educational Resources Information Center

Smith, Edgar A.; And Others

The Portable Presentation Package is a prototype of an audiovisual equipment package designed to facilitate technical training in remote areas, situations in which written communications are difficult, or in situations requiring rapid presentation of instructional material. The major criteria employed in developing the package were (1) that the…

KSC-03pd1387

NASA Image and Video Library

2003-05-02

KENNEDY SPACE CENTER, FLA. - A team aboard the Liberty Star secures lines to underwater research equipment being used on an expedition to characterize the condition of the deep-sea coral reefs and reef fish populations in the Oculina Banks, a marine protected area, 20 miles offshore of the east coast of Florida. The equipment includes an underwater robot, a seafloor sampler, and the Passive Acoustic Monitoring System (PAMS), originally developed by NASA to monitor the impact of rocket launches on wildlife refuge lagoons at KSC. The research is sponsored by NOAA Fisheries. The ship departed from Port Canaveral April 29 and will return May 9.

Intelligent Processing Equipment Projects at DLA

NASA Technical Reports Server (NTRS)

Obrien, Donald F.

1992-01-01

The Defense Logistics Agency is successfully incorporating Intelligent Processing Equipment (IPE) into each of its Manufacturing Technology thrust areas. Several IPE applications are addressed in the manufacturing of two 'soldier support' items: combat rations and military apparel. In combat rations, in-line sensors for food processing are being developed or modified from other industries. In addition, many process controls are being automated to achieve better quality and to gain higher use (soldier) acceptance. IPE applications in military apparel include: in-process quality controls for identification of sewing defects, use of robots in the manufacture of shirt collars, and automated handling of garments for pressing.

Study of aircraft electrical power systems

NASA Technical Reports Server (NTRS)

1972-01-01

The formulation of a philosophy for devising a reliable, efficient, lightweight, and cost effective electrical power system for advanced, large transport aircraft in the 1980 to 1985 time period is discussed. The determination and recommendation for improvements in subsystems and components are also considered. All aspects of the aircraft electrical power system including generation, conversion, distribution, and utilization equipment were considered. Significant research and technology problem areas associated with the development of future power systems are identified. The design categories involved are: (1) safety-reliability, (2) power type, voltage, frequency, quality, and efficiency, (3) power control, and (4) selection of utilization equipment.

Intelligent processing equipment projects at DLA

NASA Astrophysics Data System (ADS)

Obrien, Donald F.

1992-04-01

The Defense Logistics Agency is successfully incorporating Intelligent Processing Equipment (IPE) into each of its Manufacturing Technology thrust areas. Several IPE applications are addressed in the manufacturing of two 'soldier support' items: combat rations and military apparel. In combat rations, in-line sensors for food processing are being developed or modified from other industries. In addition, many process controls are being automated to achieve better quality and to gain higher use (soldier) acceptance. IPE applications in military apparel include: in-process quality controls for identification of sewing defects, use of robots in the manufacture of shirt collars, and automated handling of garments for pressing.

Statistical EMC: A new dimension electromagnetic compatibility of digital electronic systems

NASA Astrophysics Data System (ADS)

Tsaliovich, Anatoly

Electromagnetic compatibility compliance test results are used as a database for addressing three classes of electromagnetic-compatibility (EMC) related problems: statistical EMC profiles of digital electronic systems, the effect of equipment-under-test (EUT) parameters on the electromagnetic emission characteristics, and EMC measurement specifics. Open area test site (OATS) and absorber line shielded room (AR) results are compared for equipment-under-test highest radiated emissions. The suggested statistical evaluation methodology can be utilized to correlate the results of different EMC test techniques, characterize the EMC performance of electronic systems and components, and develop recommendations for electronic product optimal EMC design.

Status of research and development in coordinate-measurement technology

NASA Astrophysics Data System (ADS)

Dich, L. Z.; Latyev, S. M.

1994-09-01

This paper discusses problems involved in developing and operating coordinate-measuring machines. The status of this area of precision instrumentation is analyzed. These problems are made critical not only by the requirements of the machine-tool industry but also by those of the microelectronics industry, both of which use coordinate tables, step-up gears, and other equipment in which precise coordinate measurements are necessary.

Development of ATC for High Speed and High Density Commuter Line

NASA Astrophysics Data System (ADS)

Okutani, Tamio; Nakamura, Nobuyuki; Araki, Hisato; Irie, Shouji; Osa, Hiroki; Sano, Minoru; Ikeda, Keigo; Ozawa, Hiroyuki

A new ATC (Automatic Train Control) system has been developed with solutions to realize short train headway by assured braking utilizing digital data transmission via rails; the digital data for the ATP (Automatic Train Protection) function; and to achieve EMC features for both AC and DC sections. The DC section is of the unprecedented DC traction power supply system utilizing IGBT PWM converter at all DC substations. Within the AC section, train traction force is controlled by PWM converter/inverters. The carrier frequencies of the digital data signals and chopping frequency of PWM traction power converters on-board are decided via spectral analysis of noise up to degraded mode cases of equipment. Developed system was equipped to the Tukuba Express Line, new commuter line of Tokyo metropolitan area, and opened since Aug. 2005.

Comparative evaluation of ERTS-A imagery for resource inventory in land-use planning

NASA Technical Reports Server (NTRS)

Simonson, G. H. (Principal Investigator)

1972-01-01

There are no author-identified significant results in this report. The overall objectives of this program are: (1) use of multidiscipline team approach to determine features that can be successfully monitored by ERTS-1 imagery for resource inventory, planning, land use zoning, and resource development; and (2) using carefully selected sample areas, develop a comprehensive resource inventory mapping system for use in planning, zoning, and resource development. Progress has included compilation and organization of ground truth data and observations in the primary study area of Crook County; resource inventory legend development; assembly and testing of color enhancement equipment; development and adaption of programs for digital data processing; and quick-look evaluations of initial ERTS-1 imagery for Oregon.

Many small consumers, one growing problem: Achieving energy savings for electronic equipment operating in low power modes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Payne, Christopher T.; Meier, Alan K.

2004-08-24

An increasing amount of electricity is used by equipment that is neither fully ''on'' nor fully ''off.'' We call these equipment states low power modes, or ''lopomos.'' ''Standby'' and ''sleep'' are the most familiar lopomos, but some new products already have many modes. Lopomos are becoming common in household appliances, safety equipment, and miscellaneous products. Ross and Meier (2000) reports that several international studies have found standby power to be as much as 10 percent of residential energy consumption. Lopomo energy consumption is likely to continue growing rapidly as products with lopomos that use significant amounts of energy penetrate themore » market. Other sectors such as commercial buildings and industry also have lopomo energy use, perhaps totaling more in aggregate than that of households, but no comprehensive measurements have been made. In this paper, we propose a research agenda for study of lopomo energy consumption. This agenda has been developed with input from over 200 interested parties. Overall, there is consensus that lopomo energy consumption is an important area for research. Many see this as a critical time for addressing lopomo issues. As equipment designs move from the binary ''on/off'' paradigm to one that encompasses multiple power modes, there is a unique opportunity to address the issue of low power mode energy consumption while technology development paths are still flexible.« less

Accessible Bus Service in the Washington, D.C. Metropolitan Area.

DOT National Transportation Integrated Search

1983-01-01

The Washington Metropolitan Area Transit Authority (WMATA) began operation of lift-equipped fixed-route service on several of its Metrobus routes in July 1979. Using 151 Flxible buses equipped with Vapor front-door lift devices, WMATA made 8% of its ...

30 CFR 72.520 - Diesel equipment inventory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Diesel equipment inventory. 72.520 Section 72... HEALTH HEALTH STANDARDS FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.520 Diesel equipment inventory. (a) The operator of each mine that utilizes diesel equipment...

30 CFR 72.520 - Diesel equipment inventory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Diesel equipment inventory. 72.520 Section 72... HEALTH HEALTH STANDARDS FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.520 Diesel equipment inventory. (a) The operator of each mine that utilizes diesel equipment...

30 CFR 77.403 - Mobile equipment; falling object protective structures (FOPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Mobile equipment; falling object protective... AREAS OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.403 Mobile equipment; falling... underground coal mines shall be provided with substantial falling object protective structures (FOPS). FOPS...

30 CFR 77.403 - Mobile equipment; falling object protective structures (FOPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Mobile equipment; falling object protective... AREAS OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.403 Mobile equipment; falling... underground coal mines shall be provided with substantial falling object protective structures (FOPS). FOPS...

30 CFR 77.403 - Mobile equipment; falling object protective structures (FOPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Mobile equipment; falling object protective... AREAS OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.403 Mobile equipment; falling... underground coal mines shall be provided with substantial falling object protective structures (FOPS). FOPS...

33 CFR 142.24 - Use of equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CONTINENTAL SHELF ACTIVITIES WORKPLACE SAFETY AND HEALTH Personal Protective Equipment § 142.24 Use of... required by this subpart to use or wear personal protective equipment do so when within the lease area or... personnel engaged in the operation properly use or wear the personal protective equipment specified by this...

33 CFR 142.24 - Use of equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTINENTAL SHELF ACTIVITIES WORKPLACE SAFETY AND HEALTH Personal Protective Equipment § 142.24 Use of... required by this subpart to use or wear personal protective equipment do so when within the lease area or... personnel engaged in the operation properly use or wear the personal protective equipment specified by this...

30 CFR 72.520 - Diesel equipment inventory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Diesel equipment inventory. 72.520 Section 72... HEALTH HEALTH STANDARDS FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.520 Diesel equipment inventory. (a) The operator of each mine that utilizes diesel equipment...

30 CFR 72.520 - Diesel equipment inventory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Diesel equipment inventory. 72.520 Section 72... HEALTH HEALTH STANDARDS FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.520 Diesel equipment inventory. (a) The operator of each mine that utilizes diesel equipment...

30 CFR 72.520 - Diesel equipment inventory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Diesel equipment inventory. 72.520 Section 72... HEALTH HEALTH STANDARDS FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.520 Diesel equipment inventory. (a) The operator of each mine that utilizes diesel equipment...

Availability of difficult airway equipment to rural anaesthetists in Queensland, Australia.

PubMed

Eley, Victoria; Lloyd, Ben; Scott, Justin; Greenland, Keith

2008-01-01

Since 1990 several airway devices have become available to assist in difficult intubation. Multiple surveys have assessed difficult airway equipment availability in international anaesthetic departments and emergency departments. The practice of GP anaesthetists is unique in both its multidisciplinary nature and geographical isolation. General practitioners performing general anaesthesia in rural and remote Queensland, Australia were surveyed to assess their access to difficult airway equipment and whether this was related to the remoteness of their location or attendance at continuing professional development activities. survey. proceduralists performing general anaesthesia in hospitals categorised as Rural, Remote and Metropolitan Area (RRMA) classification 4 to 7 inclusive were surveyed. data collected included demographic information, availability of airway management equipment, and attendance at continuing professional development activities. The received data was entered into a Microsoft Excel spreadsheet and analysed in Statistical Package for Social Sciences (SPSS Inc; Chicago, IL, USA) using the frequencies and crosstabs functions. The Fisher's exact test was used. A p-value of less than 0.10 was considered noteworthy and a p-value of less than 0.05 was considered to be significant. A statistical comparison was made between the known demographics of the target population and the survey responders. The known demographics were derived from the Health Workforce Queensland database and included age, gender, practice location and practitioner type. Seventy-nine surveys were distributed and 35 returned (response rate 44%). This represented 21 hospitals. There was no statistical difference between the target population and the survey responders in terms of age and gender. There was no statistical difference in terms of practice location, although the small percentage responding from RRMA 6 was notable. There was a statistically significant difference between the groups in terms of practitioner type. Hospital-based practitioners were relatively under-represented in the responder group. Eighty-two per cent of practitioners felt they had access to appropriate equipment and this was not significantly related the remoteness of their location. There was wide variation in available equipment. Simple adjuncts such as the bougie and stylet were not universally available but cricothyroidotomy sets were more common. Practitioners in the more remote locations were less likely to have attended an educational activity such as conference, workshop or skills laboratory (p=0.05). We suggest standardisation of difficult airway equipment for rural practitioners. This could be supported by increased availability of airway management workshops in remote areas. Such an intervention would be in line with other initiatives to standardise medical equipment in rural and remote Queensland hospitals. Familiarity with infrequently used equipment may assist practitioners and their locums. Standardisation of equipment and practice is a recognised method of improving patient safety.

Mobilizable RDF/d-RDF burning program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niemann, K.; Campbell, J.

1982-03-01

The Mobilizable RDF/d-RDF Burning Program was conceived to promote the utilization of refuse-derived fuels (RDF) as a supplement to existing fossil fuel sources in industrial-sized boilers. The program explores the design, development, and eventual construction of densified-RDF (d-RDF) for use in boiler combustion testing as a supplement to stoker coal or wood wastes. The equipment would be mounted on trailers and assembled and operated at preselected sites throughout the country where approximately 750 tons of RDF would be produced and test burned in a local boiler. The equipment, to include a transportable RDF boiler metering and feed system, would thenmore » be moved and operated at two to three test sites annually. The program is intended to encourage the construction of permanent resource recovery facilities by involving local waste handling groups in operating the equipment and producing fuel, and potential local fuel users in testing the fuel in their boilers. The Mobilizable Program was developed from two separate tasks. The first task developed the concept behind the program and defined its operational and organizational structure. The second task, a follow-up to the first, was intended principally to finalize test locations, develop equipment designs and specifications, and formalize a management program. This report summarizes the principal findings of both tasks. It identifies the criteria used to identify test locations, outlines the program's management structure, presents design and performance specifications for both the fuel production equipment and boiler fuel feed systems, and provides a detailed evaluation of the parameters involved in burning RDF in industrial-sized boilers. Final conclusions and recommendations identify problem areas encountered in the program, and discuss possible future directions for such a program.« less

Reimbursement for Durable Medical Equipment

PubMed Central

Janssen, Theodore J.; Saffran, G. Theodore

1981-01-01

The use of durable medical equipment in the home, while not a recent development, was formally recognized by the Congress with the passage of the original Medicare legislation. Since that time the statute has been amended to provide for a more workable, economical, and desirable interface among the administrative, supplier, and user communities. To assist in achieving this end, a research project was begun in October 1976 that has yielded data on Federal expenditures for reimbursement of rental and purchase costs of this equipment. Data were extracted from the Beneficiary History Files of five Part B carriers in 11 geographic areas covering the period 1976-1977. These data included the type of equipment; rental or purchase decision; submitted charges; allowed charges; and reimbursement by Medicare. Some 1.3 million individual records, from approximately 400,000 beneficiaries, were tabulated and analyzed. The exploratory nature of this research has provided a benchmark for future research and policy considerations. This article details various characteristics of the data collected for the project. PMID:10309365

Identification of the actual state and entity availability forecasting in power engineering using neural-network technologies

NASA Astrophysics Data System (ADS)

Protalinsky, O. M.; Shcherbatov, I. A.; Stepanov, P. V.

2017-11-01

A growing number of severe accidents in RF call for the need to develop a system that could prevent emergency situations. In a number of cases accident rate is stipulated by careless inspections and neglects in developing repair programs. Across the country rates of accidents are growing because of a so-called “human factor”. In this regard, there has become urgent the problem of identification of the actual state of technological facilities in power engineering using data on engineering processes running and applying artificial intelligence methods. The present work comprises four model states of manufacturing equipment of engineering companies: defect, failure, preliminary situation, accident. Defect evaluation is carried out using both data from SCADA and ASEPCR and qualitative information (verbal assessments of experts in subject matter, photo- and video materials of surveys processed using pattern recognition methods in order to satisfy the requirements). Early identification of defects makes possible to predict the failure of manufacturing equipment using mathematical techniques of artificial neural network. In its turn, this helps to calculate predicted characteristics of reliability of engineering facilities using methods of reliability theory. Calculation of the given parameters provides the real-time estimation of remaining service life of manufacturing equipment for the whole operation period. The neural networks model allows evaluating possibility of failure of a piece of equipment consistent with types of actual defects and their previous reasons. The article presents the grounds for a choice of training and testing samples for the developed neural network, evaluates the adequacy of the neural networks model, and shows how the model can be used to forecast equipment failure. There have been carried out simulating experiments using a computer and retrospective samples of actual values for power engineering companies. The efficiency of the developed model for different types of manufacturing equipment has been proved. There have been offered other research areas in terms of the presented subject matter.

KENNEDY SPACE CENTER, FLA. - Viewed across the turn basin in the Launch Complex 39 Area, the crawler transporter slowly moves the Mobile Launcher Platform (MLP), carrying a set of twin solid rocket boosters, away from the Vehicle Assembly Building (VAB). The journey is in support of engineering analysis vibration tests on the crawler and MLP. The water on the right of the crawlerway is the Banana River. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

NASA Image and Video Library

2003-11-17

KENNEDY SPACE CENTER, FLA. - Viewed across the turn basin in the Launch Complex 39 Area, the crawler transporter slowly moves the Mobile Launcher Platform (MLP), carrying a set of twin solid rocket boosters, away from the Vehicle Assembly Building (VAB). The journey is in support of engineering analysis vibration tests on the crawler and MLP. The water on the right of the crawlerway is the Banana River. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

24 CFR 904.107 - Responsibilities of homebuyer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... maintaining the common areas and property, including fixtures and equipment, in good condition and appearance... includes the work (labor and materials) of keeping the dwelling structure, grounds and equipment in good... common areas and property. (d) Inspections. A homebuyer shall agree to permit officials, employees, or...

Skylab

NASA Image and Video Library

1972-01-01

This photograph, with callouts, depicts the experiment area of the forward compartment at the upper level of the Orbital Workshop. The upper level consisted of a large work area and housed water storage tanks, a food freezer, storage vaults for film, scientific airlocks, mobility and stability experiment equipment, and other experimental equipment.

High-tech rural clinics and hospitals in Japan: a comparison to the Japanese average.

PubMed

Matsumoto, Masatoshi; Okayama, Masanobu; Inoue, Kazuo; Kajii, Eiji

2004-10-01

Japanese medical facilities are noted for being heavily equipped with high-tech equipment compared to other industrialised countries. Rural facilities are anecdotally said to be better equipped than facilities in other areas due to egalitarian health resource diffusion policies by public sectors whose goal is to secure fair access to modern medical technologies among the entire population. To show the technology status of rural practice and compare it to the national level. Nationwide postal survey. Questionnaires were sent to the directors of 1362 public hospitals and clinics (of the 1723 municipalities defined as 'rural' by four national laws). Information was collected about the technologies they possessed. The data were compared with figures from a national census of all hospitals and clinics. A total of 766 facilities responded (an effective response rate of 56%). Rural facilities showed higher possession rates in most comparable technologies than the national level. It is noted that almost all rural hospitals had gastroscopes and colonoscopes and their possession rates of bronchoscopes and dialysis equipment were twice as high as the national level. The discrepancy in possession rates between rural and national was even more remarkable in clinics than in hospitals. Rural clinics owned twice as many abdominal ultrasonographs, and three times as many gastroscopes, colonoscopes, defibrillators and computed tomography scanners as the national level. Rural facilities are equipped with more technology than urban ones. Government-led, tax based, technology diffusion in the entire country seems to have attained its goal. What is already known on this subject: As a general tendency in both developing and developed countries, rural medical facilities are technologically less equipped than their urban counterparts. What does this paper add?: In Japan, rural medical facilities are technologically better equipped than urban facilities.

Strategic Shock: Managing the Strategic Gap

DTIC Science & Technology

2013-03-01

intended to transport 340 mcm annually with 80 percent of the water allocated to support agriculture in the Negev Desert and 20 percent to be used for... water resources in those areas, and have prohibited the development of additional wells and water infrastructure. This lack of development of water ...Soviet military actions, up to and including nuclear war, and had built a well trained and well equipped military establishment whose primary focus was

Overmoded W-Band Traveling Wave Tube Amplifier

DTIC Science & Technology

2014-11-24

developing high power tubes for use in that frequency range. In addition , there is a window at 220 GHz which is also an area of large development for...equipment. operation. Figure 1-4 shows electronic warfare applications, which involve disrupting electronic systems with high power microwave and millimeter...requiring gyrotrons to power the high -energy beam and a large transport vehicle. In addition to being difficult to transport, it is currently incapable

The 17th Project Integration Meeting

NASA Technical Reports Server (NTRS)

Mcdonald, R. R.

1981-01-01

Progress made by the Low-Cost Solar Array Project during the period September 1980 to February 1981 is described. Included are reports on project analysis and integration; technology development in silicon material, large-area silicon sheet and encapsulation; production process and equipment development; engineering, and operations. A report on and copies of visual presentations made at the Project Integration Meeting held at Pasadena, California on February 4 and 5, 1981 are also included.

Navy Research, Development, and Acquisition Management Guide

DTIC Science & Technology

1993-02-01

the Coast Guard. Not to be medicine, special or preventive medicine, used by Navy or Marine Corps activities. dentistry , and medical equipment and...development facilities. D-4 D4.2 Each center gathers information in its Crew Systems Ergonomics Information specialized area of interest; reviews, analyzes...ocean facilities and to enhance the Marine Corps population, and on problems of fleet Seabees and the Marine Corps operational and field dentistry

Teaching and Assessing Polygons Using Technology

ERIC Educational Resources Information Center

Soucie, Tanja; Radovic, Nikol; Svedrec, Renata; Kokic, Ivana

2011-01-01

Studying geometry is an integral component of learning mathematics because it allows students to analyse and interpret the world they live in as well as equip them with tools they can apply in other areas of mathematics. Therefore, students need to develop an understanding of geometric concepts as well as gaining adequate geometry related skills.…

Vocational Home Economics Curriculum Guide for Occupational Home and Institutional Services.

ERIC Educational Resources Information Center

Dewald, Margaret R.

The training program outlined in this guide focuses upon the development of students for gainful employment through a two-year course of study in home and institutional services. Instructional topics are provided in nine areas: orientation to home and institutional services, cleaning supplies and equipment, cleaning surfaces, cleaning clothes and…

A Developing Market for Continuing Higher Education: The Reserve Components.

ERIC Educational Resources Information Center

Watt, David M.

Due to increasingly sophisticated military equipment, the Reserve Components of the armed forces need to raise the educational standards for recruits. A number of U.S. educational institutions have responded to their needs for continuing higher education in the areas of job skill enhancement (such as computer operation), regular courses directly…

Virtual Laboratory for QoS Study in Next-Generation Networks with Metro Ethernet Access

ERIC Educational Resources Information Center

Gomez-Sacristan, Angel; Sempere-Paya, Victor M.; Rodriguez-Hernandez, Miguel A.

2016-01-01

Teaching in university engineering departments is currently facing a number of challenges, especially for those involved in the most innovative and dynamic areas of information and communication technology. Learning model developments that place greater weight on laboratory activities require investment in specific equipment that is often very…

A STUDY OF THE NEED FOR TECHNICIAN TRAINING IN AGRICULTURE AND WELDING AT YUBA COLLEGE.

ERIC Educational Resources Information Center

ORUM, EARL

OBJECTIVES OF THE STUDY INCLUDED INVESTIGATION OF THE INTEREST OF LOCAL HIGH SCHOOL STUDENTS IN THESE OCCUPATIONS, ESTABLISHING THE NEEDS FOR PERSONS SO TRAINED, DETERMINING THE TYPE OF TRAINING NECESSARY, DEVELOPING THE CURRICULA, AND OBTAINING INFORMATION USEFUL FOR PLANNING FACILITIES AND NECESSARY EQUIPMENT. THE FOUR AREAS SPECIFICALLY CHOSEN…

Range Environmental Assessment for Test Area C-52 Complex, Eglin Air Force Base, Florida

DTIC Science & Technology

2014-10-31

tourism in the region. Promotes and develops general business, trade, and tourism components of the state economy. Chapter 334 Transportation...sale in BWB. 124 Canterbury Circle. Sat. Aug. 23rd, 8am-2pm. Sports equip, house- wares, books, puzzles, linens, glassware, all must go! Indoor sale

Conceptual study of superconducting urban area power systems

NASA Astrophysics Data System (ADS)

Noe, Mathias; Bach, Robert; Prusseit, Werner; Willén, Dag; Gold-acker, Wilfried; Poelchau, Juri; Linke, Christian

2010-06-01

Efficient transmission, distribution and usage of electricity are fundamental requirements for providing citizens, societies and economies with essential energy resources. It will be a major future challenge to integrate more sustainable generation resources, to meet growing electricity demand and to renew electricity networks. Research and development on superconducting equipment and components have an important role to play in addressing these challenges. Up to now, most studies on superconducting applications in power systems have been concentrated on the application of specific devices like for example cables and current limiters. In contrast to this, the main focus of our study is to show the consequence of a large scale integration of superconducting power equipment in distribution level urban power systems. Specific objectives are to summarize the state-of-the-art of superconducting power equipment including cooling systems and to compare the superconducting power system with respect to energy and economic efficiency with conventional solutions. Several scenarios were considered starting from the replacement of an existing distribution level sub-grid up to a full superconducting urban area distribution level power system. One major result is that a full superconducting urban area distribution level power system could be cost competitive with existing solutions in the future. In addition to that, superconducting power systems offer higher energy efficiency as well as a number of technical advantages like lower voltage drops and improved stability.

The Current State of Sensing, Health Management, and Control for Small-To-Medium-Sized Manufacturers

PubMed Central

Helu, Moneer; Weiss, Brian

2017-01-01

The development of digital technologies for manufacturing has been challenged by the difficulty of navigating the breadth of new technologies available to industry. This difficulty is compounded by technologies developed without a good understanding of the capabilities and limitations of the manufacturing environment, especially within small-to-medium enterprises (SMEs). This paper describes industrial case studies conducted to identify the needs, priorities, and constraints of manufacturing SMEs in the areas of performance measurement, condition monitoring, diagnosis, and prognosis. These case studies focused on contract and original equipment manufacturers with less than 500 employees from several industrial sectors. Solution and equipment providers and National Institute of Standards and Technology (NIST) Hollings Manufacturing Extension Partnership (MEP) centers were also included. Each case study involved discussions with key shop-floor personnel as well as site visits with some participants. The case studies highlight SME's strong need for access to appropriate data to better understand and plan manufacturing operations. They also help define industrially-relevant use cases in several areas of manufacturing operations, including scheduling support, maintenance planning, resource budgeting, and workforce augmentation. PMID:28736773

Medical equipment donations in Haiti: flaws in the donation process.

PubMed

Dzwonczyk, Roger; Riha, Chris

2012-04-01

The magnitude 7.0 earthquake that struck Haiti on 12 January 2010 devastated the capital city of Port-au-Prince and the surrounding area. The area's hospitals suffered major structural damage and material losses. Project HOPE sought to rebuild the medical equipment and clinical engineering capacity of the country. A team of clinical engineers from the United States of America and Haiti conducted an inventory and assessment of medical equipment at seven public hospitals affected by the earthquake. The team found that only 28% of the equipment was working properly and in use for patient care; another 28% was working, but lay idle for technical reasons; 30% was not working, but repairable; and 14% was beyond repair. The proportion of equipment in each condition category was similar regardless of whether the equipment was present prior to the earthquake or was donated afterwards. This assessment points out the flaws that existed in the medical equipment donation process and reemphasizes the importance of the factors, as delineated by the World Health Organization more than a decade ago, that constitute a complete medical equipment donation.

78 FR 63233 - National Offshore Safety Advisory Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... Equipment in Hazardous Areas on Foreign Flag Mobile Offshore Drilling Units. (4) Safety Impact of Liftboat... Equipment in Hazardous Areas on Foreign Flag Mobile Offshore Drilling Units (MODUs); (d) Safety Impact of... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2013-0886] National Offshore Safety...

21 CFR 600.11 - Physical establishment, equipment, animals, and care.

Code of Federal Regulations, 2010 CFR

2010-04-01

... in space used for the manufacture of products except that manufacturing space which is used only...-forming microorganism(s) from the manufacturing area for subsequent manufacture of other products. These... designed to mechanically isolate equipment or an area that involves manufacturing using live vaccine...

33 CFR 106.265 - Security measures for restricted areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Telecommunications; (iii) Power distribution system; (iv) Access points for ventilation and air-conditioning systems... security areas within the OCS facility; (6) Protect security and surveillance equipment and systems; and (7... security and surveillance equipment and systems and their controls, and lighting system controls; and (3...

Skylab

NASA Image and Video Library

1972-01-01

This image, with callouts, depicts the storage area of the forward compartment at the upper level of the Orbital Workshop (OWS). The upper level consisted of a large work area and housed water storage tanks, a food freezer, storage vaults for film, scientific airlocks, mobility and stability experiment equipment, and other experimental equipment.

A Mathematical Model for Pathogen Cross-Contamination Dynamics during the Postharvest Processing of Leafy Greens.

PubMed

Mokhtari, Amir; Oryang, David; Chen, Yuhuan; Pouillot, Regis; Van Doren, Jane

2018-01-08

We developed a probabilistic mathematical model for the postharvest processing of leafy greens focusing on Escherichia coli O157:H7 contamination of fresh-cut romaine lettuce as the case study. Our model can (i) support the investigation of cross-contamination scenarios, and (ii) evaluate and compare different risk mitigation options. We used an agent-based modeling framework to predict the pathogen prevalence and levels in bags of fresh-cut lettuce and quantify spread of E. coli O157:H7 from contaminated lettuce to surface areas of processing equipment. Using an unbalanced factorial design, we were able to propagate combinations of random values assigned to model inputs through different processing steps and ranked statistically significant inputs with respect to their impacts on selected model outputs. Results indicated that whether contamination originated on incoming lettuce heads or on the surface areas of processing equipment, pathogen prevalence among bags of fresh-cut lettuce and batches was most significantly impacted by the level of free chlorine in the flume tank and frequency of replacing the wash water inside the tank. Pathogen levels in bags of fresh-cut lettuce were most significantly influenced by the initial levels of contamination on incoming lettuce heads or surface areas of processing equipment. The influence of surface contamination on pathogen prevalence or levels in fresh-cut bags depended on the location of that surface relative to the flume tank. This study demonstrates that developing a flexible yet mathematically rigorous modeling tool, a "virtual laboratory," can provide valuable insights into the effectiveness of individual and combined risk mitigation options. © 2018 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

The KnowRISK project: Tools and strategies to reduce non-structural damage

NASA Astrophysics Data System (ADS)

Sousa Oliveira, Carlos; Lopes, Mário; Mota de Sá, Francisco; Amaral Ferreia, Mónica; Candeias, Paulo; Campos Costa, Alfredo; Rupakhety, Rajesh; Meroni, Fabrizio; Azzaro, Raffaele; D'Amico, Salvatore; Langer, Horst; Musacchio, Gemma; Sousa Silva, Delta; Falsaperla, Susanna; Scarfì, Luciano; Tusa, Giuseppina; Tuvé, Tiziana

2016-04-01

The project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements) is financed by the European Commission to develop prevention measures that may reduce non-structural damage in urban areas. Pilot areas of the project are within the three European participating countries, namely Portugal, Iceland and Italy. Non-structural components of a building include all those components that are not part of the structural system, more specifically the architectural, mechanical, electrical, and plumbing systems, as well as furniture, fixtures, equipment, and contents. Windows, partitions, granite veneer, piping, ceilings, air conditioning ducts and equipment, elevators, computer and hospital equipment, file cabinets, and retail merchandise are all examples of non-structural components that are vulnerable to earthquake damage. We will use the experience gained during past earthquakes, which struck in particular Iceland, Italy and Portugal (Azores). Securing the non-structural elements improves the safety during an earthquake and saves lives. This paper aims at identifying non-structural seismic protection measures in the pilot areas and to develop a portfolio of good practices for the most common and serious non-structural vulnerabilities. This systematic identification and the portfolio will be achieved through a "cross-knowledge" strategy based on previous researches, evidence of non-structural damage in past earthquakes. Shake table tests of a group of non-structural elements will be performed. These tests will be filmed and, jointly with portfolio, will serve as didactic supporting tools to be used in workshops with building construction stakeholders and in risk communication activities. A Practical Guide for non-structural risk reduction will be specifically prepared for citizens on the basis of the outputs of the project, taking into account the local culture and needs of each participating country.

Methods for measuring plating thicknesses on TAB lead frames

NASA Technical Reports Server (NTRS)

Hagen, M. P.

1977-01-01

Plating three layer tape lead frames, used for tape automated bonding, offers a challenge to the electroplater because of nonuniform topography. Each lead frame contains large (typically .05 x. .05 inch) flat test pads located around the perimeter of the frame. These test pads are electrically connected to the bondable lead frame fingers which extend into an area in the center of the frame called the feature hole. The feature hole exposes these fingers to plating on all sides, while the test pads are exposed on only one side. In addition, the fingers are small in cross section (typically .003 x .0015 inches). Recent thickness measurements indicate that plating around the lead frame fingers is nearly twice as thick as that on test pad areas. Procedures and equipment were developed for measuring the thickness of the deposited material. Discussion was centered on the data obtained using the various measurement techniques and equipment.

A mixed-modem approach to data isolation on a broadband local area network

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crutcher, R.I.; Ewing, P.D.

1988-01-01

Data isolation is required to broadband networks to prevent unauthorized access to the sensitive data of other users. Isolation can be obtained by using equipment from more than one manufacturer to introduce incompatibility between nonassociated users. This paper develops the basis for isolation and postulates that four layers of isolation will exist when the proper equipment is chosen. An experimental broadband local area network (LAN) was constructed to verify isolation. This independent network allowed variations in operating conditions without causing interference in normal broadband operations. The measured results indicate that a broadband LAN can transmit data of varying sensitivity levelsmore » without compromising data security. When combined with certain administrative restrictions, the mixed-modem technique provides a cost-effective method of sharing a broadband network while maintaining isolation of data having different sensitivities. 5 refs., 2 figs.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This manual of the Chemical Hazard Response Information System (CHRIS) has been developed to present current information and assist on-scene coordinators (OSC) on techniques, equipment, and systems that are available to combat and minimize the damage that can be expected when a hazardous chemical is discharged into navigable waters. The handbook describes the content and use of CHRIS and discusses the causes of accidental discharges of hazardous chemicals. It provides a quick reference guide to the selection of response methods and describes these methods in detail. The handbook is also complemented by an appendix containing a review of the state-of-the-artmore » response equipment and systems and a comprehensive catalogue of response equipment. In this handbook response methods are divided into two categories: cautionary and corrective. Cautionary responses, which should be promptly applied to preserve human and animal life, include restricting entry into the area affected by the discharge and use of the water polluted by the discharge, as well as evacuation of threatened areas. Corrective responses include methods of stopping or reducing a further discharge of the chemical, containment procedures, and methods of collection, recovery, and treatment. Methods of cleaning an affected shoreline and treatment of an exposed waterfront are also described.« less

Design of a Lunar Farside Observatory

NASA Technical Reports Server (NTRS)

1989-01-01

The design of a mantendable lunar farside observatory and science base is presented. A farside observatory will allow high accuracy astronomical observations, as well as the opportunity to perform geological and low gravity studies on the Moon. The requirements of the observatory and its support facilities are determined, and a preliminary timeline for the project development is presented. The primary areas of investigation include observatory equipment, communications, habitation, and surface operations. Each area was investigated to determine the available options, and each option was evaluated to determine the advantages and disadvantages. The options selected for incorporation into the design of the farside base are presented. The observatory equipment deemed most suitable for placement on the lunar farside consist of large optical and radio arrays and seismic equipment. A communications system consisting of a temporary satellite about the L sub 2 libration point and followed by a satellite at the stable L sub 5 libration point was selected. A space station common module was found to be the most practical option for housing the astronauts at the base. Finally, a support system based upon robotic construction vehicles and the use of lunar materials was determined to be a necessary component of the base.

Optimizing oil spill cleanup efforts: A tactical approach and evaluation framework.

PubMed

Grubesic, Tony H; Wei, Ran; Nelson, Jake

2017-12-15

Although anthropogenic oil spills vary in size, duration and severity, their broad impacts on complex social, economic and ecological systems can be significant. Questions pertaining to the operational challenges associated with the tactical allocation of human resources, cleanup equipment and supplies to areas impacted by a large spill are particularly salient when developing mitigation strategies for extreme oiling events. The purpose of this paper is to illustrate the application of advanced oil spill modeling techniques in combination with a developed mathematical model to spatially optimize the allocation of response crews and equipment for cleaning up an offshore oil spill. The results suggest that the detailed simulations and optimization model are a good first step in allowing both communities and emergency responders to proactively plan for extreme oiling events and develop response strategies that minimize the impacts of spills. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements

NASA Technical Reports Server (NTRS)

Rey, Charles A.

1991-01-01

The development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements are discussed. Efforts were directed towards the following task areas: design and development of a High Temperature Acoustic Levitator (HAL) for containerless processing and property measurements at high temperatures; testing of the HAL module to establish this technology for use as a positioning device for microgravity uses; construction and evaluation of a brassboard hot wall Acoustic Levitation Furnace; construction and evaluation of a noncontact temperature measurement (NCTM) system based on AGEMA thermal imaging camera; construction of a prototype Division of Amplitude Polarimetric Pyrometer for NCTM of levitated specimens; evaluation of and recommendations for techniques to control contamination in containerless materials processing chambers; and evaluation of techniques for heating specimens to high temperatures for containerless materials experimentation.

Development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements

NASA Astrophysics Data System (ADS)

Rey, Charles A.

1991-03-01

The development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements are discussed. Efforts were directed towards the following task areas: design and development of a High Temperature Acoustic Levitator (HAL) for containerless processing and property measurements at high temperatures; testing of the HAL module to establish this technology for use as a positioning device for microgravity uses; construction and evaluation of a brassboard hot wall Acoustic Levitation Furnace; construction and evaluation of a noncontact temperature measurement (NCTM) system based on AGEMA thermal imaging camera; construction of a prototype Division of Amplitude Polarimetric Pyrometer for NCTM of levitated specimens; evaluation of and recommendations for techniques to control contamination in containerless materials processing chambers; and evaluation of techniques for heating specimens to high temperatures for containerless materials experimentation.

Strategic Factors on Interpreting Remanufacturing Quality-Certifying Framework to Address Warranty Aftermarket for Malaysian Industry

NASA Astrophysics Data System (ADS)

Mohamed, N.; Saman, M. Z. M.; Sharif, S.; Hamzah, H. S.

2018-03-01

While the concept of remanufacturing is gaining popularity globally, literature and theory on strategic decision-making on certifying for warranty in this area remain limited. A strategic and establish concept flow is developed based on extensive literature review and surveys with experienced experts who are dealing with remanufactured, reconditioned, rebuilt and reused components. The remanufacturing research on evaluating quality assurance of remanufactured component targets macro-level parameters and the indicators which must be confirmed for evaluation. The strategic remanufacturing factors identified from the literature review are discussed in a brainstorming session with a number of remanufacturing researchers and academic experts. The study is further broadened by industrial surveys and case studies to justify the inputs on developing a framework to certify remanufactured components. Preliminary results have established the key factors of remanufacturing quality control that might lead to the strict quality assurance of remanufactured components. Later, the developed framework can be used as a benchmarking tool to certify remanufactured components and warranty issuance. The findings serve as the foundation for further research concerning Original Equipment Manufacturer (OEM) or Original Equipment Remanufacturer (OER) and Independent Equipment Remanufacturer (IER) in the Malaysian Remanufacturing Industry.

X-ray satellite

NASA Technical Reports Server (NTRS)

1985-01-01

An overview of the second quarter 1985 development of the X-ray satellite project is presented. It is shown that the project is proceeding according to plan and that the projected launch date of September 9, 1987 is on schedule. An overview of the work completed and underway on the systems, subsystems, payload, assembly, ground equipment and interfaces is presented. Problem areas shown include cost increases in the area of focal instrumentation, the star sensor light scattering requirements, and postponements in the data transmission subsystems.

Anti-Hassle Chip

NASA Technical Reports Server (NTRS)

1998-01-01

With assistance from NASA's Ames Research Center, the iTV Corporation has developed a full custom microprocessor that enables access to the Internet through a $49 device. The microprocessor is supported with a compliment of design tools for customization and adaptation as either a licensable core or as a complete microprocessor. Other uses include cell phones, DVD (digital versatile disk) players, cable modems, video conferencing equipment, digital cameras, wireless LANs (Local Area Network) and WANs (Wide Area Network). iTV continues to design new, low-cost consumer products.

21 CFR 600.11 - Physical establishment, equipment, animals, and care.

Code of Federal Regulations, 2014 CFR

2014-04-01

... care. 600.11 Section 600.11 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... establishment, equipment, animals, and care. (a) Work areas. All rooms and work areas where products are... the extent necessary to prevent cross-contamination. (f) Animals used in manufacture—(1) Care of...

40 CFR 63.1022 - Equipment identification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... identity, either by list, location (area or group), or other method, of equipment in regulated material... area or length of pipe subject to the provisions of this subpart are identified as a group, and the... instrumentation systems subject to the provisions of § 63.1029 of this subpart. Individual components in an...

40 CFR 63.1022 - Equipment identification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... identity, either by list, location (area or group), or other method, of equipment in regulated material... area or length of pipe subject to the provisions of this subpart are identified as a group, and the... instrumentation systems subject to the provisions of § 63.1029 of this subpart. Individual components in an...

40 CFR 63.1022 - Equipment identification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... identity, either by list, location (area or group), or other method, of equipment in regulated material... area or length of pipe subject to the provisions of this subpart are identified as a group, and the... instrumentation systems subject to the provisions of § 63.1029 of this subpart. Individual components in an...

40 CFR 63.1022 - Equipment identification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... identity, either by list, location (area or group), or other method, of equipment in regulated material... area or length of pipe subject to the provisions of this subpart are identified as a group, and the... instrumentation systems subject to the provisions of § 63.1029 of this subpart. Individual components in an...

40 CFR 63.1022 - Equipment identification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... identity, either by list, location (area or group), or other method, of equipment in regulated material... area or length of pipe subject to the provisions of this subpart are identified as a group, and the... instrumentation systems subject to the provisions of § 63.1029 of this subpart. Individual components in an...

75 FR 42819 - Airborne Area Navigation Equipment Using Loran-C Inputs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-22

... Using Loran-C Inputs AGENCY: Federal Aviation Administration (FAA), DOT ACTION: Notice of cancellation of: (1) Loran-C navigation system Technical Standard Orders (TSO); and (2) the revocation of Loran-C... the cancellation of Technical Standard Order (TSO) C-60, Airborne Area Navigation Equipment Using...

75 FR 22674 - Airborne Area Navigation Equipment Using Loran-C Inputs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... Using Loran-C Inputs AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of cancellation of: (1) Loran-C navigation system Technical Standard Orders (TSO); and (2) the revocation of Loran-C... the cancellation of Technical Standard Order (TSO) C-60, Airborne Area Navigation Equipment Using...

KSC-03pd1386

NASA Image and Video Library

2003-05-02

KENNEDY SPACE CENTER, FLA. - Underwater research equipment slowly sinks into the water. An undersea expedition is underway to characterize the condition of the deep-sea coral reefs and reef fish populations in the Oculina Banks, a marine protected area, 20 miles offshore of the east coast of Florida. The equipment includes an underwater robot, a seafloor sampler, and the Passive Acoustic Monitoring System (PAMS), originally developed by NASA to monitor the impact of rocket launches on wildlife refuge lagoons at KSC. The research is sponsored by NOAA Fisheries and will take place onboard the Liberty Star. The ship departed from Port Canaveral April 29 and will return May 9.

Fire test method for graphite fiber reinforced plastics

NASA Technical Reports Server (NTRS)

Bowles, K. J.

1980-01-01

A potential problem in the use of graphite fiber reinforced resin matrix composites is the dispersal of graphite fibers during accidential fires. Airborne, electrically conductive fibers originating from the burning composites could enter and cause shorting in electrical equipment located in surrounding areas. A test method for assessing the burning characteristics of graphite fiber reinforced composites and the effectiveness of the composites in retaining the graphite fibers has been developed. The method utilizes a modified rate of heat release apparatus. The equipment and the testing procedure are described. The application of the test method to the assessment of composite materials is illustrated for two resin matrix/graphite composite systems.

Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review

NASA Astrophysics Data System (ADS)

Hardwicke, Canan U.; Lau, Yuk-Chiu

2013-06-01

Functional coatings are widely used in energy generation equipment in industries such as renewables, oil and gas, propulsion engines, and gas turbines. Intelligent thermal spray processing is vital in many of these areas for efficient manufacturing. Advanced thermal spray coating applications include thermal management, wear, oxidation, corrosion resistance, sealing systems, vibration and sound absorbance, and component repair. This paper reviews the current status of materials, equipment, processing, and properties' aspects for key coatings in the energy industry, especially the developments in large-scale gas turbines. In addition to the most recent industrial advances in thermal spray technologies, future technical needs are also highlighted.

ISAARE: Information System for Adaptive, Assistive, and Recreational Equipment: Volume I: Existence; Volume II, Communication; Volume V, Adaptation.

ERIC Educational Resources Information Center

Melichar, Joseph F.

Described as part of the Information System for Adaptive, Assistive and Recreational Equipment are equipment items for physically handicapped pupils in the functional areas of existence, equipment and adaptation. Reviewed in the existence section are such items as assistive food containers and container stabilizers, feeder accessories, bowel and…

ONR (Office of Naval Research) Far East Scientific Bulletin. Volume 8, Number 4, October-December 1983,

DTIC Science & Technology

1983-12-01

electrical medical equipment manufacturer; Toshiba has recently developed a new whole-body computer tomography (CT) imaging system based on nuclear...flow per unit area at 20,000°K was found to be twice that at 5000°K. Calculated results agree with expriment. " New Developments in Design and Testing...and Osaka. As part of an ]l-year national project started in November 1980 to develop new electric energy storage systems (sponsored by the Japanese

Modeling job sites in real time to improve safety during equipment operation

NASA Astrophysics Data System (ADS)

Caldas, Carlos H.; Haas, Carl T.; Liapi, Katherine A.; Teizer, Jochen

2006-03-01

Real-time three-dimensional (3D) modeling of work zones has received an increasing interest to perform equipment operation faster, safer and more precisely. In addition, hazardous job site environment like they exist on construction sites ask for new devices which can rapidly and actively model static and dynamic objects. Flash LADAR (Laser Detection and Ranging) cameras are one of the recent technology developments which allow rapid spatial data acquisition of scenes. Algorithms that can process and interpret the output of such enabling technologies into threedimensional models have the potential to significantly improve work processes. One particular important application is modeling the location and path of objects in the trajectory of heavy construction equipment navigation. Detecting and mapping people, materials and equipment into a three-dimensional computer model allows analyzing the location, path, and can limit or restrict access to hazardous areas. This paper presents experiments and results of a real-time three-dimensional modeling technique to detect static and moving objects within the field of view of a high-frame update rate laser range scanning device. Applications related to heavy equipment operations on transportation and construction job sites are specified.

High Vacuum Creep Facility in the Materials Processing Laboratory

NASA Image and Video Library

1973-01-21

Technicians at work in the Materials Processing Laboratory’s Creep Facility at the National Aeronautics and Space Administration (NASA) Lewis Research Center. The technicians supported the engineers’ studies of refractory materials, metals, and advanced superalloys. The Materials Processing Laboratory contained laboratories and test areas equipped to prepare and develop these metals and materials. The ultra-high vacuum lab, seen in this photograph, contained creep and tensile test equipment. Creep testing is used to study a material’s ability to withstand long durations under constant pressure and temperatures. The equipment measured the strain over a long period of time. Tensile test equipment subjects the test material to strain until the material fails. The two tests were used to determine the strength and durability of different materials. The Materials Processing Laboratory also housed arc and electron beam melting furnaces, a hydraulic vertical extrusion press, compaction and forging equipment, and rolling mills and swagers. There were cryogenic and gas storage facilities and mechanical and oil diffusion vacuum pumps. The facility contained both instrumental and analytical chemistry laboratories for work on radioactive or toxic materials and the only shop to machine toxic materials in the Midwest.

A flight research program to develop airborne systems for improved terminal area operations

NASA Technical Reports Server (NTRS)

Reeder, J. P.

1974-01-01

The research program considered is concerned with the solution of operational problems for the approximate time period from 1980 to 2000. The problems are related to safety, weather effects, congestion, energy conservation, noise, atmospheric pollution, and the loss in productivity caused by delays, diversions, and schedule stretchouts. The terminal configured vehicle (TCV) program is to develop advanced flight-control capability. The various aspects of the TCV program are discussed, giving attention to avionics equipment, the piloted simulator, terminal-area environment simulation, the Wallops research facility, flight procedures, displays and human factors, flight activities, and questions of vortex-wake reduction and tracking.

Large area sheet task. Advanced dendritic web growth development. [silicon films

NASA Technical Reports Server (NTRS)

Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.; Meier, D.; Frantti, E.; Schruben, J.

1981-01-01

The development of a silicon dendritic web growth machine is discussed. Several refinements to the sensing and control equipment for melt replenishment during web growth are described and several areas for cost reduction in the components of the prototype automated web growth furnace are identified. A circuit designed to eliminate the sensitivity of the detector signal to the intensity of the reflected laser beam used to measure melt level is also described. A variable speed motor for the silicon feeder is discussed which allows pellet feeding to be accomplished at a rate programmed to match exactly the silicon removed by web growth.

Dealing with office emergencies. Stepwise approach for family physicians.

PubMed Central

Sempowski, Ian P.; Brison, Robert J.

2002-01-01

OBJECTIVE: To develop a simple stepwise approach to initial management of emergencies in family physicians' offices; to review how to prepare health care teams and equipment; and to illustrate a general approach to three of the most common office emergencies. QUALITY OF EVIDENCE: MEDLINE was searched from January 1980 to December 2001. Articles were selected based on their clinical relevance, quality of evidence, and date of publication. We reviewed American family medicine, pediatric, dental, and dermatologic articles, but found that the area has not been well studied from a Canadian family medicine perspective. Consensus statements by specialty professional groups were used to identify accepted emergency medical treatments. MAIN MESSAGE: Family medicine offices are frequently poorly equipped and inadequately prepared to deal with emergencies. Straightforward emergency response plans can be designed and tailored to an office's risk profile. A systematic team approach and effective use of skills, support staff, and equipment is important. The general approach can be modified for specific patients or conditions. CONCLUSION: Family physicians can plan ahead and use a team approach to develop a simple stepwise response to emergency situations in the office. PMID:12371305

Precision Information Environment (PIE) for International Safeguards: Pre-Demonstration Development Use Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gastelum, Zoe N.; Henry, Michael J.

2013-11-13

In FY2013, the PIE International Safeguards team demonstrated our development progress to U.S. Department of Energy (DOE) staff from the Office of Nonproliferation and International Security (NA-24, our client) and the Office of Defense Nuclear Nonproliferation Research and Development (NA-22). Following the demonstration, the team was asked by our client to complete additional development prior to a planned demonstration at the International Atomic Energy Agency (IAEA), scheduled tentatively for January or spring of 2014. The team discussed four potential areas for development (in priority order), and will develop them as time and funding permit prior to an IAEA demonstration. Themore » four capability areas are: 1. Addition of equipment manuals to PIE-accessible files 2. Optical character recognition (OCR) of photographed text 3. Barcode reader with information look-up from a database 4. Add Facilities to Data Model 5. Geospatial capabilities with information integration Each area will be described below in a use case.« less

Hand tools: A compilation

NASA Technical Reports Server (NTRS)

1972-01-01

A selection of new hand tools, modifications of existing tools, and techniques developed in the course of NASA research and development projects are presented. The items are presented in two sections: tools for cable and connector applications, and tools for welding applications. Safety is emphasized, together with ease of operation and use in restricted areas or hazardous environments. The discussions are directed primarily toward the technician engaged in assembly or maintenance of mechanical or electrical equipment.

15. INTERIOR VIEW TO THE NORTHEAST OF EQUIPMENT IN ROOM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. INTERIOR VIEW TO THE NORTHEAST OF EQUIPMENT IN ROOM 4, EQUIPMENT AND GENERATOR ROOM, BUILDING 3113/3113A. - Nevada Test Site, Test Cell A Facility, Test Cell A Building & Addition, Area 25, Jackass Flats, Road F, Mercury, Nye County, NV

Crew factors in the design of the Space Station

NASA Technical Reports Server (NTRS)

Robinson, Judith L.

1987-01-01

The designing of Space Shuttle modules and equipment in order to provide a stimulating and efficient work atmosphere and a pleasant living environment is examined. The habitation module for the eight crew members is divided into four areas: ceiling, floor, port, and starboard. The module is to consist of crew quarters, a wardroom, a galley, a personal hygiene facility, a health maintenance facility, and stowage areas. There is a correlation between the function of the module and its location; for example the galley will be near the wardroom and the personal hygiene facility near the crew quarters. The designs of the equipment for crew accommodation and of the equipment to be maintained and repaired by the crew will be standarized. The design and functions of the crew and equipment restraints, crew mobility aids, racks to contain equipment, and functional units are described.

Asset management in theory and practice.

PubMed

Mace, J D

1998-01-01

Managing capital-intensive imaging environments continues to be a challenge for nearly all administrators. Asset management, the strategic management of equipment inventory, must include planning, assessment, procurement, utilization review, maintenance, repair and disposal of equipment to reduce costs and improve efficiency. It must involve some shared risk between the facility and the provider, whether an original equipment manufacturer (OEM) or independent service organization (ISO). An absence of risk in the arrangement implies the provider is offering service management or consulting. A case study reports on three hospitals in the OhioHealth system. Their immediate goal, as they began to investigate asset management: cut costs immediately. A cross-functional team from the three hospitals began its investigation of various options, including working with ISOs, OEMs and development of inhouse clinical engineering. After developing a process to evaluate vendors, the team was able to score each against their cost-reduction potential, quality and implementation skills. The team narrowed its selection quickly to two multivendor service providers. An initial contract guaranteed savings of 20 percent of the annual budget, with a projected two to five percent additional savings. OEM relationships were moved to a time-and-materials basis, and ISOs were used in selected areas. In addition, the internal inhouse clinical engineering services group was moved into a "first call" approach in some areas. That expanded role resulted in savings and improved response time. The process, although not without its problems, was viewed favorably overall.

Space Station Environmental Control and Life Support System Test Facility at Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Springer, Darlene

1989-01-01

Different aspects of Space Station Environmental Control and Life Support System (ECLSS) testing are currently taking place at Marshall Space Flight Center (MSFC). Unique to this testing is the variety of test areas and the fact that all are located in one building. The north high bay of building 4755, the Core Module Integration Facility (CMIF), contains the following test areas: the Subsystem Test Area, the Comparative Test Area, the Process Material Management System (PMMS), the Core Module Simulator (CMS), the End-use Equipment Facility (EEF), and the Pre-development Operational System Test (POST) Area. This paper addresses the facility that supports these test areas and briefly describes the testing in each area. Future plans for the building and Space Station module configurations will also be discussed.

Career Exploration in Agribusiness, Renewable Natural Resources, and Environmental Protection: A Curriculum Guide for Grades 7-9.

ERIC Educational Resources Information Center

Lawson, Dorothy; And Others

This guide contains eight learning modules which are designed as samples which fuse the career development concepts, subject matter, and occupational information into learning activities using occupations as the nucleus. There is one module for each of the eight occupational areas: agricultural equipment and mechanics, agricultural products (food…

Interest-Based Curriculum for House Care Services: House Cares.

ERIC Educational Resources Information Center

Natchitoches Parish School Board, LA.

The 11-unit curriculum guide for house care services, a Federally sponsored project, is designed to help students identify interests and develop skills associated with house care services. Two introductory units deal with the world of work and the total area of house care services. The following unit topics are: sanitation and safety; equipment;…

Military Curricula for Vocational & Technical Education. Packing and Unitization, 19-2.

ERIC Educational Resources Information Center

Joint Military Packaging Training Center, Aberdeen Proving Ground, MD.

This correspondence course on methods and techniques of packing materials and equipment for shipment and storage is designed to familiarize students with the subject matter area and to serve as a background for a more detailed and specialized study. One of a number of military-developed curriculum packages selected for adaptation to vocational…

36 CFR 292.44 - Use of motorized and mechanical equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Use of motorized and mechanical equipment. 292.44 Section 292.44 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL RECREATION AREAS Hells Canyon National Recreation Area-Federal Lands § 292.44 Use of...

36 CFR 292.44 - Use of motorized and mechanical equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Use of motorized and mechanical equipment. 292.44 Section 292.44 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL RECREATION AREAS Hells Canyon National Recreation Area-Federal Lands § 292.44 Use of...

36 CFR 292.44 - Use of motorized and mechanical equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Use of motorized and mechanical equipment. 292.44 Section 292.44 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL RECREATION AREAS Hells Canyon National Recreation Area-Federal Lands § 292.44 Use of...

77 FR 51930 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Attainment Plan for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... for the Philadelphia Area. While the monitoring data that show the Philadelphia Area attained the 1997... sources (such as cargo handling equipment) at ports. Activity data for land-based sources collected from... emission estimates. EPA also verified that land-based sources for cargo handling equipment, such as...

Tools, Equipment, and Machinery Adapted for the Vocational Education and Employment of Handicapped People.

ERIC Educational Resources Information Center

Gugerty, John, Comp.; And Others

Intended to assist in the vocational education and employment of individuals who are handicapped, this catalog contains descriptions and illustrations of modified tools, equipment, and machinery for use in 38 areas. These use areas are arts, assembly, assessment, automobile repair, benchwork, communication, computer processing, cosmetology,…

42 CFR 23.11 - Under what circumstances may the Secretary sell equipment or other property of the United States...

Code of Federal Regulations, 2010 CFR

2010-10-01

... equipment or other property of the United States used by the National Health Service Corps site? 23.11... circumstances may the Secretary sell equipment or other property of the United States used by the National... manpower shortage area, the Secretary may sell equipment and other property of the United States used by...

Current status and standards for establishment of hemodialysis units in Korea

PubMed Central

Lee, Young-Ki; Kim, Kiwon

2013-01-01

The number of hemodialysis patients and dialysis facilities is increasing each year, but there are no surveillance programs validating that the services and equipment of each hemodialysis unit meet specified safety and quality standards. There is a concern that excessive competition and illegal activities committed by some dialysis facilities may violate patients' right to health. Contrastingly, developed countries often have their own survey program to provide initial certification and monitoring to ensure that these clinics continue to meet basic requirements. Because hemodialysis units provide renal replacement therapy to critical patients suffering from severe chronic renal failure, appropriate legal regulation is important for the provision of initial certification and maintenance of facility, equipment, and human resource quality. Therefore, several standards providing minimum requirements for the area of hemodialysis unit, equipment for emergency care, physician and nurse staffs, water purification and quality management are urgently needed. PMID:23682218

Ergonomics technology

NASA Technical Reports Server (NTRS)

Jones, W. L.

1977-01-01

Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

Practical problems for Aboriginal palliative care service provision in rural and remote areas: equipment, power and travel issues.

PubMed

McGrath, Pam; Holewa, Hamish; McGrath, Zoe

2007-07-01

With regards to end-of-life care, there is scant published research that looks specifically at the provision of palliative care services for Indigenous people. In addition, for Indigenous people in the rural and remote areas there is only limited literature that focuses on the problems associated with geography. To address the hiatus in the literature on Aboriginal, rural and remote palliative care, the following article provides findings from a two-year research project, funded by Australia's National Health and Medical Research Council (NH&MRC), which developed an innovative model for Indigenous palliative care. The data was collected through a qualitative methodology (descriptive phenomenology) which involved open-ended in-depth interviews, audio-recorded, transcribed verbatim and thematically analysed. The sub-set of findings from the study presented in this paper examine issues in relation to the many practical obstacles in relation to palliative care service provision to Indigenous people in the rural and remote areas. The findings are a testament to the ingenuity and dedication of those who provide end-of-life care for Aboriginal peoples in rural and remote locations. The information about the many obstacles associated with equipment, power, transport, distance and telephone access provide important insights to inform the development of health policy planning and funding. The topic is specifically relevant to nurses as further findings from the study indicate that clinic and community nurses are key health professionals providing care to Indigenous people in the rural and remote areas.

49 CFR 236.929 - Training specific to roadway workers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... themselves or roadway work groups. (b) What subject areas must roadway worker training include? (1... control equipment in establishing protection for roadway workers and their equipment. (2) Instruction for roadway workers must ensure recognition of processor-based signal and train control equipment on the...

A field demonstration of energy conservation using occupancy sensor lighting control in equipment rooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dagle, J.E.

1992-09-01

The Pacific Northwest Laboratory identified energy savings potential of automatic equipment-room lighting controls, which was demonstrated by the field experiment described in this report. Occupancy sensor applications have gained popularity in recent years due to improved technology that enhances reliability and reduces cost. Automatic lighting control using occupancy sensors has been accepted as an energy-conservation measure because it reduces wasted lighting. This study focused on lighting control for equipment rooms, which have inherent conditions ideal for automatic lighting control, i.e., an area which is seldom occupied, multiple users of the area who would not know if others are in themore » room when they leave, and high lighting energy intensity in the area. Two rooms were selected for this study: a small equipment room in the basement of the 337 Building, and a large equipment area in the upper level of the 329 Building. The rooms were selected to demonstrate the various degrees of complexity which may be encountered in equipment rooms throughout the Hanford Site. The 337 Building equipment-room test case demonstrated a 97% reduction in lighting energy consumption, with an annual energy savings of $184. Including lamp-replacement savings, a total savings of $306 per year is offset by an initial installation cost of $1,100. The installation demonstrates a positive net present value of $2,858 when the lamp-replacement costs are included in a life-cycle analysis. This also corresponds to a 4.0-year payback period. The 329 Building equipment-room installation resulted in a 92% reduction in lighting energy consumption. This corresponds to annual energy savings of $1,372, and a total annual savings of $2,104 per year including lamp-replacement savings. The life-cycle cost analysis shows a net present value of $15,855, with a 5.8-year payback period.« less

[Fundamental aspects for accrediting medical equipment calibration laboratories in Colombia].

PubMed

Llamosa-Rincón, Luis E; López-Isaza, Giovanni A; Villarreal-Castro, Milton F

2010-02-01

Analysing the fundamental methodological aspects which should be considered when drawing up calibration procedure for electro-medical equipment, thereby permitting international standard-based accreditation of electro-medical metrology laboratories in Colombia. NTC-ISO-IEC 17025:2005 and GTC-51-based procedures for calibrating electro-medical equipment were implemented and then used as patterns. The mathematical model for determining the estimated uncertainty value when calibrating electro-medical equipment for accreditation by the Electrical Variable Metrology Laboratory's Electro-medical Equipment Calibration Area accredited in compliance with Superintendence of Industry and Commerce Resolution 25771 May 26th 2009 consists of two equations depending on the case; they are: E = (Ai + sigmaAi) - (Ar + sigmaAr + deltaAr1) and E = (Ai + sigmaAi) - (Ar + sigmaA + deltaAr1). The mathematical modelling implemented for measuring uncertainty in the Universidad Tecnológica de Pereira's Electrical Variable Metrology Laboratory (Electro-medical Equipment Calibration Area) will become a good guide for calibration initiated in other laboratories in Colombia and Latin-America.

Shuttle Ku-band and S-band communications implementations study

NASA Technical Reports Server (NTRS)

Huth, G. K.; Nessibou, T.; Nilsen, P. W.; Simon, M. K.; Weber, C. L.

1979-01-01

The interfaces between the Ku-band system and the TDRSS, between the S-band system and the TDRSS, GSTDN and SGLS networks, and between the S-band payload communication equipment and the other Orbiter avionic equipment were investigated. The principal activities reported are: (1) performance analysis of the payload narrowband bent-pipe through the Ku-band communication system; (2) performance evaluation of the TDRSS user constraints placed on the S-band and Ku-band communication systems; (3) assessment of the shuttle-unique S-band TDRSS ground station false lock susceptibility; (4) development of procedure to make S-band antenna measurements during orbital flight; (5) development of procedure to make RFI measurements during orbital flight to assess the performance degradation to the TDRSS S-band communication link; and (6) analysis of the payload interface integration problem areas.

A system to geometrically rectify and map airborne scanner imagery and to estimate ground area. [by computer

NASA Technical Reports Server (NTRS)

Spencer, M. M.; Wolf, J. M.; Schall, M. A.

1974-01-01

A system of computer programs were developed which performs geometric rectification and line-by-line mapping of airborne multispectral scanner data to ground coordinates and estimates ground area. The system requires aircraft attitude and positional information furnished by ancillary aircraft equipment, as well as ground control points. The geometric correction and mapping procedure locates the scan lines, or the pixels on each line, in terms of map grid coordinates. The area estimation procedure gives ground area for each pixel or for a predesignated parcel specified in map grid coordinates. The results of exercising the system with simulated data showed the uncorrected video and corrected imagery and produced area estimates accurate to better than 99.7%.

Land use policy and agricultural water management of the previous half of century in Africa

NASA Astrophysics Data System (ADS)

Valipour, Mohammad

2015-12-01

This paper examines land use policy and agricultural water management in Africa from 1962 to 2011. For this purpose, data were gathered from Food and Agriculture Organization of the United Nations (FAO) and the World Bank Group. Using the FAO database, ten indices were selected: permanent crops to cultivated area (%), rural population to total population (%), total economically active population in agriculture to total economically active population (%), human development index, national rainfall index (mm/year), value added to gross domestic product by agriculture (%), irrigation water requirement (mm/year), percentage of total cultivated area drained (%), difference between national rainfall index and irrigation water requirement (mm/year), area equipped for irrigation to cultivated area or land use policy index (%). These indices were analyzed for all 53 countries in the study area and the land use policy index was estimated by two different formulas. The results show that value of relative error is <20 %. In addition, an average index was calculated using various methods to assess countries' conditions for agricultural water management. Ability of irrigation and drainage systems was studied using other eight indices with more limited information. These indices are surface irrigation (%), sprinkler irrigation (%), localized irrigation (%), spate irrigation (%), agricultural water withdrawal (10 km3/year), conservation agriculture area as percentage of cultivated area (%), percentage of area equipped for irrigation salinized (%), and area waterlogged by irrigation (%). Finally, tendency of farmers to use irrigation systems for cultivated crops has been presented. The results show that Africa needs governments' policy to encourage farmers to use irrigation systems and raise cropping intensity for irrigated area.

Social individualism: Walter Gropius and his appropriation of Franz Müller-Lyer's idea of a new man.

PubMed

Poppelreuter, Tanja

2011-01-01

In 1929, Walter Gropius developed the "High-Rise Steel Frame Apartment Building" that was based on theories about the emergence of a New Man put forward by sociologist Franz Müller-Lyer. In his lecture at the Congrès International d’Architecture Moderne conference in 1929, Gropius appropriated Müller-Lyer's sociology in order to promote and prompt the re-development of high-rise tenements and master households. Gropius’ 1931 contribution to the Deutsche Bauausstellung in Berlin incorporated a full-scale community lounge and a recreation area with sporting equipment, as well as a model and plans for a "High-Rise Steel Frame Apartment Building" that were designed in accordance with Müller-Lyer's theories. While it shows Müller-Lyer's influence, the boxing equipment found in the recreation area reflects the importance that sport, and boxing in particular, had gained after 1900. Boxing was perceived as a sport that would not only further fitness but also raise the spirits and help the inhabitant to succeed in the modern urban environment. By providing boxing equipment, Müller-Lyer's vision, which envisaged master households as furthering a community of peaceful individuals living in a condition of mutual trust, is weakened. In 1923, the sociologist Helmuth Plessner had regarded utopian visions of ideal communities as antithesis to actual events in the Weimar Republic. The embracing of theories that promised an evolutionary and linear development towards peaceful communities can be regarded as a counterreaction to a present that was perceived as an imperfect and temporary condition. Furthermore, Gropius’ appropriation of Müller-Lyer's sociology not only helped to distinguish his position from Marxist and socialist theories but also illustrated the contemporary tendency to accept utopian ideas while simultaneously doubting the practicality of some.

Development of atmospheric pressure large area plasma jet for sterilisation and investigation of molecule and plasma interaction

NASA Astrophysics Data System (ADS)

Zerbe, Kristina; Iberler, Marcus; Jacoby, Joachim; Wagner, Christopher

2016-09-01

The intention of the project is the development and improvement of an atmospheric plasma jet based on various discharge forms (e.g. DBD, RF, micro-array) for sterilisation of biomedical equipment and investigation of biomolecules under the influence of plasma stress. The major objective is to design a plasma jet with a large area and an extended length. Due to the success on small scale plasma sterilisation the request of large area plasma has increased. Many applications of chemical disinfection in environmental and medical cleaning could thereby be complemented. Subsequently, the interaction between plasma and biomolecules should be investigated to improve plasma strerilisation. Special interest will be on non equilibrium plasma electrons affecting the chemical bindings of organic molecules.

Professional Equipment for a University Environmental Health Program

ERIC Educational Resources Information Center

Iglar, Albert F.; Morgan, Monroe T.

1972-01-01

A rather thorough description of the professional equipment utilized in the Environmental Health Program at East Tennessee State University. Describes equipment and apparatus employed in the General Environmental, Occupational Health and Safety, and the Air and Water Pollution Control Areas. Table of recommended basic professional equipment…

49 CFR 236.1049 - Training specific to roadway workers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... who provide protection for themselves or roadway work groups. (b) Training subject areas. (1... control equipment in establishing protection for roadway workers and their equipment. (2) Instruction for... recognition of processor-based signal and train control equipment on the wayside and an understanding of how...

Structures and Materials Experimental Facilities and Capabilities Catalog

NASA Technical Reports Server (NTRS)

Horta, Lucas G. (Compiler); Kurtz-Husch, Jeanette D. (Compiler)

2000-01-01

The NASA Center of Excellent for Structures and Materials at Langley Research Center is responsible for conducting research and developing useable technology in the areas of advanced materials and processing technologies, durability, damage tolerance, structural concepts, advanced sensors, intelligent systems, aircraft ground operations, reliability, prediction tools, performance validation, aeroelastic response, and structural dynamics behavior for aerospace vehicles. Supporting the research activities is a complementary set of facilities and capabilities documented in this report. Because of the volume of information, the information collected was restricted in most cases to one page. Specific questions from potential customers or partners should be directed to the points of contacts provided with the various capabilities. Grouping of the equipment is by location as opposed to function. Geographical information of the various buildings housing the equipment is also provided. Since this is the first time that such an inventory is ever collected at Langley it is by no means complete. It is estimated that over 90 percent of the equipment capabilities at hand are included but equipment is continuously being updated and will be reported in the future.

47 CFR 80.1093 - Ship radio equipment-Sea areas A1, A2, A3, and A4.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Ship radio equipment-Sea areas A1, A2, A3, and A4. 80.1093 Section 80.1093 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety...

47 CFR 80.1093 - Ship radio equipment-Sea areas A1, A2, A3, and A4.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Ship radio equipment-Sea areas A1, A2, A3, and A4. 80.1093 Section 80.1093 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety...

47 CFR 80.1093 - Ship radio equipment-Sea areas A1, A2, A3, and A4.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Ship radio equipment-Sea areas A1, A2, A3, and A4. 80.1093 Section 80.1093 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety...

47 CFR 80.1093 - Ship radio equipment-Sea areas A1, A2, A3, and A4.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Ship radio equipment-Sea areas A1, A2, A3, and A4. 80.1093 Section 80.1093 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety...

78 FR 35975 - Proposed Information Collection; Comment Request; Safety Standards for Underground Coal Mine...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... To Ventilate Working Sections and Areas Where Mechanized Mining Equipment Is Being Installed or... Reduction Act of 1995, 44 U.S.C. 3506(c)(2)(A). This program helps to assure that requested data can be... area where mechanized mining equipment is being installed or removed, only under certain conditions...

Engineering flight and guest pilot evaluation report, phase 2. [DC 8 aircraft

NASA Technical Reports Server (NTRS)

Morrison, J. A.; Anderson, E. B.; Brown, G. W.; Schwind, G. K.

1974-01-01

Prior to the flight evaluation, the two-segment profile capabilities of the DC-8-61 were evaluated and flight procedures were developed in a flight simulator at the UA Flight Training Center in Denver, Colorado. The flight evaluation reported was conducted to determine the validity of the simulation results, further develop the procedures and use of the area navigation system in the terminal area, certify the system for line operation, and obtain evaluations of the system and procedures by a number of pilots from the industry. The full area navigation capabilities of the special equipment installed were developed to provide terminal area guidance for two-segment approaches. The objectives of this evaluation were: (1) perform an engineering flight evaluation sufficient to certify the two-segment system for the six-month in-service evaluation; (2) evaluate the suitability of a modified RNAV system for flying two-segment approaches; and (3) provide evaluation of the two-segment approach by management and line pilots.

Development of the micro-scanning optical system of yellow laser applied to the ophthalmologic area

NASA Astrophysics Data System (ADS)

Ortega, Tiago A.; Mota, Alessandro D.; Costal, Glauco Z.; Fontes, Yuri C.; Rossi, Giuliano; Yasuoka, Fatima M. M.; Stefani, Mario A.; de Castro N., Jarbas C.

2012-10-01

In this work, the development of a laser scanning system for ophthalmology with micrometric positioning precision is presented. It is a semi-automatic scanning system for retina photocoagulation and laser trabeculoplasty. The equipment is a solid state laser fully integrated to the slit lamp. An optical system is responsible for producing different laser spot sizes on the image plane and a pair of galvanometer mirrors generates the scanning patterns.

Microencapsulated Phase-Change Materials For Storage Of Heat

NASA Technical Reports Server (NTRS)

Colvin, David P.

1989-01-01

Report describes research on engineering issues related to storage and transport of heat in slurries containing phase-change materials in microscopic capsules. Specific goal of project to develop lightweight, compact, heat-management systems used safely in inhabited areas of spacecraft. Further development of obvious potential of technology expected to lead to commercialization and use in aircraft, electronic equipment, machinery, industrial processes, and other sytems in which requirements for management of heat compete with severe restrictions on weight or volume.

Proceedings of the 13th Project integration meeting

NASA Technical Reports Server (NTRS)

Mcdonald, R. R.

1979-01-01

Progress made by the Low Cost Solar Array Project during the period April through August 1979 is presented. Reports are given on project analysis and integration; technology development in silicon material, large area sheet silicon, and encapsulation; production process and equipment development; engineering and operations, and a discussion of the steps taken to integrate these efforts. A report on, and copies of viewgraphs presented at the Project Integration Meeting held August 22-23, 1979 are presented.

Assessment of noise levels of the equipments used in the dental teaching institution, Bangalore.

PubMed

Kadanakuppe, Sushi; Bhat, Padma K; Jyothi, C; Ramegowda, C

2011-01-01

In dental practical classes, the acoustic environment is characterized by high noise levels in relation to other teaching areas, due to the exaggerated noise produced by some of these devices and use of dental equipment by many users at the same time. To measure, analyze and compare noise levels of equipments among dental learning areas under different working conditions and also to measure and compare noise levels between used and brand new handpieces under different working conditions. Noise levels were measured and analyzed in different dental learning areas that included clinical, pre-clinical areas and laboratories selected as representatives of a variety of learning-teaching activities. The noise levels were determined using a precision noise level meter (CENTER® 325 IEC 651 TYPE II) with a microphone. The mean of the maxima was determined. The data were collected, tabulated, and statistically analyzed using t tests. The noise levels measured varied between 64 and 97 dB(A).The differences in sound levels when the equipment was merely turned on and during cutting operations and also between used and brand new equipments were recorded. The laboratory engines had the highest noise levels, whereas the noise levels in high-speed turbine handpieces and the low-speed contra angle handpieces were decreased. The noise levels detected in this study are considered to be close to the limit of risk of hearing loss.

Neonatal resuscitation equipment: A hidden risk for our babies?

PubMed

Winckworth, Lucinda C; McLaren, Emma; Lingeswaran, Arvin; Kelsey, Michael

2016-05-01

Neonatal infections carry a heavy burden of morbidity and mortality. Poor practice can result in unintentional colonisation of medical equipment with potentially pathogenic organisms. This study will determine the prevalence and type of bacterial contamination on exposed neonatal resuscitation equipment in different clinical settings and explore simple measures to reduce contamination risk. A survey determined the rates of resuscitation equipment usage. All environmentally exposed items were identified on resuscitaires hospital-wide and swabbed for bacterial contamination. A new cleaning and storage policy was implemented and the prevalence of environmentally exposed equipment re-measured post-intervention. Resuscitation equipment was used in 28% of neonatal deliveries. Bacterial colony forming units were present on 44% of the 236 exposed equipment pieces swabbed. There was no significant difference in contamination rates between equipment types. Coagulase negative staphylococcus was the most prevalent species (59 pieces, 25%) followed by Escherichia coli and Enterobacter cloacae (20 pieces, 9% each). Opened items stored inside plastic remained sterile, whilst those in low-use areas had significantly less contamination than those in high-use areas (22% vs. 51%, P < 0.05). Implementing a simple educational programme led to a significant reduction in environmentally exposed equipment (79% reduction, P < 0.01). Pathogenic bacteria can colonise commonly used pieces of neonatal resuscitation equipment. Whilst the clinical significance remains uncertain, equipment should be kept packaged until required and discarded once open, even if unused. Standardising cleaning policies results in rapid and significant improvements in equipment storage conditions, reducing microbial colonisation opportunities. © 2016 Paediatrics and Child Health Division (The Royal Australasian College of Physicians).

KSC-03pd1385

NASA Image and Video Library

2003-05-02

KENNEDY SPACE CENTER, FLA. - A team onboard the Liberty Star, the NASA Space Shuttle support ship operated by United Space Alliance, get ready to lower underwater research equipment into the water. An undersea expedition is underway to characterize the condition of the deep-sea coral reefs and reef fish populations in the Oculina Banks, a marine protected area, 20 miles offshore of the east coast of Florida. The equipment includes an underwater robot, a seafloor sampler, and the Passive Acoustic Monitoring System (PAMS), originally developed by NASA to monitor the impact of rocket launches on wildlife refuge lagoons at KSC. The research is sponsored by NOAA Fisheries. The ship departed from Port Canaveral April 29 and will return May 9.

KSC-03pd1384

NASA Image and Video Library

2003-05-02

KENNEDY SPACE CENTER, FLA. - Underwater research equipment is prepared for immersion from the Liberty Star, the NASA Space Shuttle support ship operated by United Space Alliance. It is being used on an undersea expedition to characterize the condition of the deep-sea coral reefs and reef fish populations in the Oculina Banks, a marine protected area, 20 miles offshore of the east coast of Florida. The equipment includes an underwater robot, a seafloor sampler, and the Passive Acoustic Monitoring System (PAMS), originally developed by NASA to monitor the impact of rocket launches on wildlife refuge lagoons at KSC. The research is sponsored by NOAA Fisheries. The ship departed from Port Canaveral April 29 and will return May 9.

KSC-03pd1388

NASA Image and Video Library

2003-05-02

KENNEDY SPACE CENTER, FLA. - A view from inside the pilot house of the Liberty Star overlooks the stern where a team secures lines to underwater research equipment being used on an expedition to characterize the condition of the deep-sea coral reefs and reef fish populations in the Oculina Banks. The banks are a marine protected area, 20 miles offshore of the east coast of Florida. The equipment includes an underwater robot, a seafloor sampler, and the Passive Acoustic Monitoring System (PAMS), originally developed by NASA to monitor the impact of rocket launches on wildlife refuge lagoons at KSC. The research is sponsored by NOAA Fisheries. The ship departed from Port Canaveral April 29 and will return May 9.

[Development of Monitoring System for Infant Incubator Based on IOT Technology].

PubMed

Wang, Wenfeng; Peng, Dunlu; Gu, Nan

2017-05-30

IOT(Internet of things) is a relatively new technology, more and more integrated into our lives. In this paper we use infant incubator for example, introduce the application of IOT technology to reduce the risk of the use of medical devices, and through the dynamic management to improve the management level and efficiency. Put forward a method of medical equipment linked. Combined with the point of IOT technology and sensor technology, we find out the actual needs of the management and use of infant incubator. For the dynamic management of medical equipment, we use sensors to control risk points. The system meets the needs of the hospital and patients in many areas.

Fire test method for graphite fiber reinforced plastics

NASA Technical Reports Server (NTRS)

Bowles, K. J.

1980-01-01

A potential problem in the use of graphite fiber reinforced resin matrix composites is the dispersal of graphite fibers during accidental fires. Airborne, electrically conductive fibers originating from the burning composites could enter and cause shorting in electrical equipment located in surrounding areas. A test method for assessing the burning characteristics of graphite fiber reinforced composites and the effectiveness of the composites in retaining the graphite fibers has been developed. The method utilizes a modified Ohio State University Rate of Heat Release apparatus. The equipment and the testing procedure are described. The application of the test method to the assessment of composite materials is illustrated for two resin matrix/graphite composite systems.

Investments for medical equipment in a mother and child health hospital: correlation with level of services/departments.

PubMed

Trevisanuto, Daniele; Raggi, Roberto; Bavuusuren, Bayasgalantai; Tudevdorj, Erkhembaatar; Doglioni, Nicoletta; Zanardo, Vincenzo

2011-02-01

To assess whether investments for medical equipments assigned by a team of experts to a mother and child health hospital located in Mongolia were correlated with structural, organizational, and educational level of its services/departments. A score was used for evaluating the level of each service/department. It was based on a 'structural area' and an 'organizational and educational area'. Destination of funds was determined by a team of experts in collaboration with the head of the service/department. Thirty-three of 36 services/departments (91.6%) were evaluated. A total sum of 4,432,140 Euros to invest in medical equipment was estimated. Assigned investments were inversely correlated with the total (structural plus organizational and educational area) score (n = 33; r =  -0.59; p = 0.0002), and the specific scores for structural area (n = 33; r = -0.46; p = 0.005) and organizational and educational area (n = 33; r =  -0.56; p = 0.0006). A large part of the funds for medical equipment was destined to services/departments with low organizational and educational conditions, limiting the potential effect of the aid meanwhile supporting the most in need departments. Educational efforts and monitoring of specific long-term indicators are mandatory.

30 CFR 77.1606 - Loading and haulage equipment; inspection and maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintenance. 77.1606 Section 77.1606 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS... equipment is placed in operation. Equipment defects affecting safety shall be recorded and reported to the...

10 CFR 20.1703 - Use of individual respiratory protection equipment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Use of individual respiratory protection equipment. 20... Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1703 Use of individual respiratory protection equipment. If the licensee assigns or permits the use of respiratory...

10 CFR 20.1703 - Use of individual respiratory protection equipment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Use of individual respiratory protection equipment. 20... Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1703 Use of individual respiratory protection equipment. If the licensee assigns or permits the use of respiratory...

10 CFR 20.1703 - Use of individual respiratory protection equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Use of individual respiratory protection equipment. 20... Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1703 Use of individual respiratory protection equipment. If the licensee assigns or permits the use of respiratory...

10 CFR 20.1703 - Use of individual respiratory protection equipment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Use of individual respiratory protection equipment. 20... Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1703 Use of individual respiratory protection equipment. If the licensee assigns or permits the use of respiratory...

10 CFR 20.1703 - Use of individual respiratory protection equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Use of individual respiratory protection equipment. 20... Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1703 Use of individual respiratory protection equipment. If the licensee assigns or permits the use of respiratory...

Residential Wiring: Electrical Connections [and] Tools and Equipment.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

Intended for student use, this unit focuses on making good electrical splices and electrical connections, and discusses tools and equipment used in house wiring jobs. Specific areas covered in the connections section are types of splices, solder equipment and supplies, and solderless connectors (plastic caps, split bolt connectors, crimp-type…

30 CFR 77.502-2 - Electric equipment; frequency of examination and testing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and testing. 77.502-2 Section 77.502-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Electrical Equipment-General § 77.502-2 Electric equipment...

Vocational Education Tool and Equipment Inventory.

ERIC Educational Resources Information Center

Lewis, James P.; Burrows, Robert T.

This study was conducted to provide information on equipment needs, the extent of planning to upgrade equipment, and technological advancements necessary to continue providing quality training to entry-level students and incumbent workers. The results were based on a 98 percent return from 72 area vocational-technical school directors, 17…

47 CFR 36.125 - Local switching equipment-Category 3.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Local switching equipment-Category 3. 36.125... access lines, special access lines or private lines. (h) Effective July 1, 2001, through June 30, 2017..., 2017, all study areas shall apportion costs in Category 3, Local Switching Equipment, among the...

Design of Alarm Sound of Home Care Equipment Based on Age-related Auditory Sense

NASA Astrophysics Data System (ADS)

Shibano, Jun-Ichi; Tadano, Shigeru; Kaneko, Hirotaka

A wide variety of home care equipment has been developed to support the independent lifestyle and care taking of elderly persons. Almost all of the equipment has an alarm designed to alert a care person or to sound a warning in case of an emergency. Due to the fact that aging human beings' senses physiologically, weaken and deteriorate, each alarm's sound must be designed to account for the full range of elderly person's hearing loss. Since the alarms are usually heard indoors, it is also necessary to evaluate the relationship between the basic characteristics of the sounds and living area's layout. In this study, we investigated the sounds of various alarms of the home care equipment based on both the age-related hearing characteristics of elderly persons and the propagation property of the sounds indoors. As a result, it was determined that the hearing characteristics of elderly persons are attuned to sounds which have a frequency from 700Hz to 1kHz, and it was learned that the indoor absorption ratio of sound is smallest when the frequency is 1kHz. Therefore, a frequency of 1kHz is good for the alarm sound of home care equipment. A flow chart to design the alarm sound of home care equipment was proposed, taking into account the extent of age-related auditory sense deterioration.

A time-based concept for terminal-area traffic management

NASA Technical Reports Server (NTRS)

Erzberger, H.; Tobias, L.

1986-01-01

An automated air-traffic-management concept that has the potential for significantly increasing the efficiency of traffic flows in high-density terminal areas is discussed. The concept's implementation depends on the techniques for controlling the landing time of all aircraft entering the terminal area, both those that are equipped with on-board four dimensional guidance systems as well as those aircraft types that are conventionally equipped. The two major ground-based elements of the system are a scheduler which assigns conflict-free landing times and a profile descent advisor. Landing times provided by the scheduler are uplinked to equipped aircraft and translated into the appropriate four dimensional trajectory by the on-board flight-management system. The controller issues descent advisories to unequipped aircraft to help them achieve the assigned landing times. Air traffic control simulations have established that the concept provides an efficient method for controlling various mixes of four dimensional-equipped and unequipped, as well as low-and high-performance, aircraft.

Field repair of coated columbium Thermal Protection System (TPS)

NASA Technical Reports Server (NTRS)

Culp, J. D.

1972-01-01

The requirements for field repair of coated columbian panels were studied, and the probable cause of damage were identified. The following types of repair methods were developed, and are ready for use on an operational system: replacement of fused slurrey silicide coating by a short processing cycle using a focused radiant spot heater; repair of the coating by a glassy matrix ceramic composition which is painted or sprayed over the defective area; and repair of the protective coating by plasma spraying molybdenum disilicide over the damaged area employing portable equipment.

Biomedical technology transfer: Bioinstrumentation for cardiology, neurology, and the circulatory system

NASA Technical Reports Server (NTRS)

1976-01-01

Developments in applying aerospace medical technology to the design and production of medical equipment and instrumentation are reported. Projects described include intercranial pressure transducers, leg negative pressure devices, a synthetic speech prosthesis for victims of cerebral palsy, and a Doppler blood flow instrument. Commercialization activities for disseminating and utilizing NASA technology, and new biomedical problem areas are discussed.

Tumor Localization Using Radio Frequency Implants

DTIC Science & Technology

2006-09-01

from klystrons and other associated high - energy x-ray generating equipment in the surrounding area. The next logical concept is to use...BAT was developed to visualize the prostate organ before treatment.(34) This system requires that a technologist visually compare images received from ...distance from the transmitter. Since it is a thin wire loop, radiation can be delivered through it with minimal attenuation and

Bear's bullish in tight market. [Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, D.

Bear Coal Co. have re-opened an old mine near Somerset, Colorado, which will produce 300,000 tpy of coal. This is mined from the super section, consisting of two complete sets of production equipment. The mine alternates development and room-and-pillar mining. Coal is crushed and sized at the Terror Creek plant, along with coal from three other mines in the area.

Workstations and gloveboxes for space station

NASA Technical Reports Server (NTRS)

Junge, Maria

1990-01-01

Lockheed Missiles and Space Company is responsible for designing, developing, and building the Life Sciences Glovebox, the Laboratory Sciences Workbench, and the Maintenance Workstation plus 16 other pieces of equipment for the U.S. Laboratory Module of the Space Station Freedom. The Laboratory Sciences Workbench and the Maintenance Workstation were functionally combined into a double structure to save weight and volume which are important commodities on the Space Station Freedom. The total volume of these items is approximately 180 cubic feet. These workstations and the glovebox will be delivered to NASA in 1994 and will be launched in 1995. The very long lifetime of 30 years presents numerous technical challenges in the areas of design and reliability. The equipment must be easy to use by international crew members and also easy to maintain on-orbit. For example, seals must be capable of on-orbit changeout and reverification. The stringent contamination requirements established for Space Station Freedom equipment also complicate the zero gravity glovebox design. The current contamination control system for the Life Sciences Glovebox and the Maintenance Workstation is presented. The requirement for the Life Sciences Glovebox to safely contain toxic, reactive, and radioactive materials presents challenges. Trade studies, CAD simulation techniques and design challenges are discussed to illustrate the current baseline conceptual designs. Areas which need input from the user community are identified.

Impacts of housing development on nutrients flow along canals in a peri-urban area of Bangkok, Thailand.

PubMed

Honda, R; Hara, Y; Sekiyama, M; Hiramatsu, A

2010-01-01

Change of nutrients load and flow according to land-use change induced by housing development was investigated in Bang Yai, Nonthaburi, Thailand, which located in the peri-urban area of Bangkok. Each house in the newly developed residential community was regulated to be equipped with a septic tank to collect night soil. However, greywater and leachate from the septic tank was collected by a community sewage system and discharged into the canals with insufficient treatment, while the canals still function as infrastructure for irrigation and transportation. In the study area, built-up area became 1.4 times and agricultural fields decreased by 13% from 2003 until 2007. Total nutrients load to the canals was increased by 25% as nitrogen and 14% as phosphorus according to the increase of built-up area. Net nutrients load from agricultural fields was largely set off when we evaluated nutrients inflow from the canals to the agricultural field through irrigation. Consequently, nutrients load from domestic wastewater accounted most of net nutrients load into the canal.

Solar heating and cooling technical data and systems analysis

NASA Technical Reports Server (NTRS)

Christensen, D. L.

1976-01-01

The accomplishments of a project to study solar heating and air conditioning are outlined. Presentation materials (data packages, slides, charts, and visual aids) were developed. Bibliographies and source materials on materials and coatings, solar water heaters, systems analysis computer models, solar collectors and solar projects were developed. Detailed MIRADS computer formats for primary data parameters were developed and updated. The following data were included: climatic, architectural, topography, heating and cooling equipment, thermal loads, and economics. Data sources in each of these areas were identified as well as solar radiation data stations and instruments.

NASA's mobile satellite development program

NASA Technical Reports Server (NTRS)

Rafferty, William; Dessouky, Khaled; Sue, Miles

1988-01-01

A Mobile Satellite System (MSS) will provide data and voice communications over a vast geographical area to a large population of mobile users. A technical overview is given of the extensive research and development studies and development performed under NASA's mobile satellite program (MSAT-X) in support of the introduction of a U.S. MSS. The critical technologies necessary to enable such a system are emphasized: vehicle antennas, modulation and coding, speech coders, networking and propagation characterization. Also proposed is a first, and future generation MSS architecture based upon realized ground segment equipment and advanced space segment studies.

Sensors for Metering Heat Flux Area Density and Metrological Equipment for the Heat Flux Density Measurement

NASA Astrophysics Data System (ADS)

Doronin, D. O.

2018-04-01

The demand in measuring and studies of heat conduction of various media is very urgent now. This article considers the problem of heat conduction monitoring and measurement in various media and materials in any industries and branches of science as well as metrological support of the heat flux measurement equipment. The main study objects are both the sensors manufactured and facilities onto which these sensors will be installed: different cladding structures of the buildings, awnings, rocket fairings, boiler units, internal combustion engines. The Company develops and manufactures different types of heat flux sensors: thermocouple, thin-film, heterogeneous gradient as well as metrological equipment for the gauging calibration of the heat flux density measurement. The calibration shall be performed using both referencing method in the unit and by fixed setting of the heat flux in the unit. To manufacture heterogeneous heat flux gradient sensors (HHFGS) the Company developed and designed a number of units: diffusion welding unit, HHFGS cutting unit. Rather good quality HHFGS prototypes were obtained. At this stage the factory tests on the equipment for the heat flux density measurement equipment are planned. A high-sensitivity heat flux sensor was produced, now it is tested at the Construction Physics Research Institute (Moscow). It became possible to create thin-film heat flux sensors with the sensitivity not worse than that of the sensors manufactured by Captec Company (France). The Company has sufficient premises to supply the market with a wide range of sensors, to master new sensor manufacture technologies which will enable their application range.

A practitioner's perspective on the application and research needs of membrane bioreactors for municipal wastewater treatment.

PubMed

Kraemer, Jeremy T; Menniti, Adrienne L; Erdal, Zeynep K; Constantine, Timothy A; Johnson, Bruce R; Daigger, Glen T; Crawford, George V

2012-10-01

The application of membrane bioreactors (MBRs) for municipal wastewater treatment has increased dramatically over the last decade. From a practitioner's perspective, design practice has evolved over five "generations" in the areas of biological process optimization, separating process design from equipment supply, and reliability/redundancy thereby facilitating "large" MBRs (e.g. 150,000 m(3)/day). MBR advantages and disadvantages, and process design to accommodate biological nutrient removal, high mixed liquor suspended solids concentrations, operation and maintenance, peak flows, and procurement are reviewed from the design practitioner's perspective. Finally, four knowledge areas are identified as important to practitioners meriting further research and development: (i) membrane design and performance such as improving peak flow characteristics and decreasing operating costs; (ii) process design and performance such as managing the fluid properties of the biological solids, disinfection, and microcontaminant removal; (iii) facility design such as equipment standardization and decreasing mechanical complexity; and (iv) sustainability such as anaerobic MBRs. Copyright © 2012 Elsevier Ltd. All rights reserved.

Fiber-handling robot and optical connection mechanisms for automatic cross-connection of multiple optical connectors

NASA Astrophysics Data System (ADS)

Mizukami, Masato; Makihara, Mitsuhiro

2013-07-01

Conventionally, in intelligent buildings in a metropolitan area network and in small-scale facilities in the optical access network, optical connectors are joined manually using an optical connection board and a patch panel. In this manual connection approach, mistakes occur due to discrepancies between the actual physical settings of the connections and their management because these processes are independent. Moreover, manual cross-connection is time-consuming and expensive because maintenance personnel must be dispatched to remote places to correct mistakes. We have developed a fiber-handling robot and optical connection mechanisms for automatic cross-connection of multiple optical connectors, which are the key elements of automatic optical fiber cross-connect equipment. We evaluate the performance of the equipment, such as its optical characteristics and environmental specifications. We also devise new optical connection mechanisms that enable the automated optical fiber cross-connect module to handle and connect angled physical contact (APC) optical connector plugs. We evaluate the performance of the equipment, such as its optical characteristics. The evaluation results confirm that the automated optical fiber cross-connect equipment can connect APC connectors with low loss and high return loss, indicating that the automated optical fiber cross-connect equipment is suitable for practical use in intelligent buildings and optical access networks.

An Evaluation Method of Equipment Reliability Configuration Management

NASA Astrophysics Data System (ADS)

Wang, Wei; Feng, Weijia; Zhang, Wei; Li, Yuan

2018-01-01

At present, many equipment development companies have been aware of the great significance of reliability of the equipment development. But, due to the lack of effective management evaluation method, it is very difficult for the equipment development company to manage its own reliability work. Evaluation method of equipment reliability configuration management is to determine the reliability management capabilities of equipment development company. Reliability is not only designed, but also managed to achieve. This paper evaluates the reliability management capabilities by reliability configuration capability maturity model(RCM-CMM) evaluation method.

46 CFR 197.565 - Notifying personnel of benzene hazards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... personal protective equipment in emergency situations; (vi) The meaning of a regulated area and the means..., control measures such as personal protection equipment, and first aid procedures for benzene. A copy of... to benzene; (iv) The measures that may be taken and the equipment that may be used to protect persons...

46 CFR 197.565 - Notifying personnel of benzene hazards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... personal protective equipment in emergency situations; (vi) The meaning of a regulated area and the means..., control measures such as personal protection equipment, and first aid procedures for benzene. A copy of... to benzene; (iv) The measures that may be taken and the equipment that may be used to protect persons...

30 CFR 72.502 - Requirements for nonpermissible light-duty diesel-powered equipment other than generators and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... diesel-powered equipment other than generators and compressors. 72.502 Section 72.502 Mineral Resources... FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.502 Requirements for nonpermissible light-duty diesel-powered equipment other than generators and compressors. (a...

30 CFR 72.502 - Requirements for nonpermissible light-duty diesel-powered equipment other than generators and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... diesel-powered equipment other than generators and compressors. 72.502 Section 72.502 Mineral Resources... FOR COAL MINES Diesel Particulate Matter-Underground Areas of Underground Coal Mines § 72.502 Requirements for nonpermissible light-duty diesel-powered equipment other than generators and compressors. (a...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, O.N.; Barone, G.J.

The Federal Performance Standard for Diagnostic X-ray Equipment, which became effective August 1, 1974, is primarily directed toward manufacturers, who must produce x-ray equipment that performs in a prescribed way. It is an equipment performance standard and does not reguate diagnostic x-ray uses. The dentist, however, has responsibilities in three areas - maintenance, assembly, and variance from the standard.

Brief, Why the Launch Equipment Test Facility Needs a Laser Tracker

NASA Technical Reports Server (NTRS)

Yue, Shiu H.

2011-01-01

The NASA Kennedy Space Center Launch Equipment Test Facility (LETF) supports a wide spectrum of testing and development activities. This capability was originally established in the 1970's to allow full-scale qualification of Space Shuttle umbilicals and T-O release mechanisms. The LETF has leveraged these unique test capabilities to evolve into a versatile test and development area that supports the entire spectrum of operational programs at KSC. These capabilities are historically Aerospace related, but can certainly can be adapted for other industries. One of the more unique test fixtures is the Vehicle Motion Simulator or the VMS. The VMS simulates all of the motions that a launch vehicle will experience from the time of its roll-out to the launch pad, through roughly the first X second of launch. The VMS enables the development and qualification testing of umbilical systems in both pre-launch and launch environments. The VMS can be used to verify operations procedures, clearances, disconnect systems performance &margins, and vehicle loads through processing flow motion excursions.

Characterization of PTO and Idle Behavior for Utility Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duran, Adam W.; Konan, Arnaud M.; Miller, Eric S.

This report presents the results of analyses performed on utility vehicle data composed primarily of aerial lift bucket trucks sampled from the National Renewable Energy Laboratory's Fleet DNA database to characterize power takeoff (PTO) and idle operating behavior for utility trucks. Two major data sources were examined in this study: a 75-vehicle sample of Odyne electric PTO (ePTO)-equipped vehicles drawn from multiple fleets spread across the United States and 10 conventional PTO-equipped Pacific Gas and Electric fleet vehicles operating in California. Novel data mining approaches were developed to identify PTO and idle operating states for each of the datasets usingmore » telematics and controller area network/onboard diagnostics data channels. These methods were applied to the individual datasets and aggregated to develop utilization curves and distributions describing PTO and idle behavior in both absolute and relative operating terms. This report also includes background information on the source vehicles, development of the analysis methodology, and conclusions regarding the study's findings.« less

Terminal configured vehicle program: Test facilities guide

NASA Technical Reports Server (NTRS)

1980-01-01

The terminal configured vehicle (TCV) program was established to conduct research and to develop and evaluate aircraft and flight management system technology concepts that will benefit conventional take off and landing operations in the terminal area. Emphasis is placed on the development of operating methods for the highly automated environment anticipated in the future. The program involves analyses, simulation, and flight experiments. Flight experiments are conducted using a modified Boeing 737 airplane equipped with highly flexible display and control equipment and an aft flight deck for research purposes. The experimental systems of the Boeing 737 are described including the flight control computer systems, the navigation/guidance system, the control and command panel, and the electronic display system. The ground based facilities used in the program are described including the visual motion simulator, the fixed base simulator, the verification and validation laboratory, and the radio frequency anechoic facility.

User Interaction with the CNPC Link

NASA Technical Reports Server (NTRS)

Hobbs, Alan; Lyall, Elizabeth A.

2014-01-01

As part of NASAs UAS in the NAS project, human factor guidelines are being developed for the ground control station of unmanned aircraft systems. A critical task for the pilot of a UAS is the management and control of the terrestrial radio links used to provide control of the vehicle and relay communications with air traffic control. An analysis of the task of the UAS pilot has been conducted to identify areas where guidelines are required. This analysis has identified a set of information requirements that must be supported by the radio equipment used to provide Control and Non-payload Communication (CNPC). Key requirements include the need for an alert when the link is lost, information on the current quality and latency of the link, and information to enable the future quality of the link to be anticipated as the aircraft changes location. These identified requirements can assist in the development of minimum operational performance standards for CNPC equipment.

Final Technical Report: Development of an Abrasion-Resistant Antisoiling Coating for Front-Surface Reflectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gee, Randy C.

A high-performance reflective film has been successfully developed for Concentrating Solar Power (CSP) solar concentrators. Anti-soiling properties and abrasion resistance have been incorporated into the reflector to reduce reflector cleaning costs and to enhance durability. This approach has also resulted in higher reflectance and improved specularity. From the outset of this project we focused on the use of established high-volume roll-to-roll manufacturing techniques to achieve low manufacturing costs on a per ubit area basis. Roll-to-roll manufacturng equipment has a high capital cost so there is an entire industry devoted to roll-to-roll “toll” manufacturing, where the equipment is operated “around themore » clock” to produce a multitude of products for a large variety of uses. Using this approach, the reflective film can be manufactured by toll coaters/converters on an as-needed basis.« less

Difficult Decisions Made Easier

NASA Technical Reports Server (NTRS)

2006-01-01

NASA missions are extremely complex and prone to sudden, catastrophic failure if equipment falters or if an unforeseen event occurs. For these reasons, NASA trains to expect the unexpected. It tests its equipment and systems in extreme conditions, and it develops risk-analysis tests to foresee any possible problems. The Space Agency recently worked with an industry partner to develop reliability analysis software capable of modeling complex, highly dynamic systems, taking into account variations in input parameters and the evolution of the system over the course of a mission. The goal of this research was multifold. It included performance and risk analyses of complex, multiphase missions, like the insertion of the Mars Reconnaissance Orbiter; reliability analyses of systems with redundant and/or repairable components; optimization analyses of system configurations with respect to cost and reliability; and sensitivity analyses to identify optimal areas for uncertainty reduction or performance enhancement.

Flood Control, State Road and Ebner Coulees, La Crosse, Wisconsin, General Design Memorandum. Phase I. Plan Formulation and Hydrology and Draft Environmental Impact Statement.

DTIC Science & Technology

1982-04-01

development of the floodplain by use of appropriate floodplain management techniques to reduce flood losses . h. In the event of future development or...the total annual flood damages in the study area. These losses include physical damages to land, buildings, equipment, and stocks of merchandise as...well as the loss of wages and business profits and the costs of emergency protection. Average annual commercial damages are estimated at $253,000. The

Mapping Van

NASA Technical Reports Server (NTRS)

1994-01-01

A NASA Center for the Commercial Development of Space (CCDS) - developed system for satellite mapping has been commercialized for the first time. Global Visions, Inc. maps an area while driving along a road in a sophisticated mapping van equipped with satellite signal receivers, video cameras and computer systems for collecting and storing mapping data. Data is fed into a computerized geographic information system (GIS). The resulting amps can be used for tax assessment purposes, emergency dispatch vehicles and fleet delivery companies as well as other applications.

Boring in the Big City - part 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giuliani, A.J.

This paper describes technologies being utilized or tested by Brooklyn Union for gas main installation. Trenchless technologies described include pipe splitting, key holes to minimize excavations, and boring. Areas in lining system technology which require further development by vendors and manufacturers of trenchless equipment are also addressed. Specific needs identified include: (1) improving instrumentation for locating and controlling underground boring; (2) repairing soft and hard lining systems; and (3) developing a window cutter to safely remove the old carrier pipes without damaging the newly fitted internal plastic pipes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willoner, T.; Turlington, R.; Koenig, R.

The U.S. Department of Energy (DOE) (Environmental Management [EM], Office of Packaging and Transportation [EM-45]) Packaging and Certification Program (DOE PCP) has developed a Radio Frequency Identification (RFID) tracking and monitoring system, called ARG-US, for the management of nuclear materials packages during transportation and storage. The performance of the ARG-US RFID equipment and system has been fully tested in two demonstration projects in April 2008 and August 2009. With the strong support of DOE-SR and DOE PCP, a field testing program was completed in Savannah River Site's K-Area Material Storage (KAMS) Facility, an active Category I Plutonium Storage Facility, inmore » 2010. As the next step (Phase II) of continued vault testing for the ARG-US system, the Savannah River Site K Area Material Storage facility has placed the ARG-US RFIDs into the 910B storage vault for operational testing. This latest version (Mark III) of the Argonne RFID system now has the capability to measure radiation dose and dose rate. This paper will report field testing progress of the ARG-US RFID equipment in KAMS, the operability and reliability trend results associated with the applications of the system, and discuss the potential benefits in enhancing safety, security and materials accountability. The purpose of this Phase II K Area test is to verify the accuracy of the radiation monitoring and proper functionality of the ARG-US RFID equipment and system under a realistic environment in the KAMS facility. Deploying the ARG-US RFID system leads to a reduced need for manned surveillance and increased inventory periods by providing real-time access to status and event history traceability, including environmental condition monitoring and radiation monitoring. The successful completion of the testing program will provide field data to support a future development and testing. This will increase Operation efficiency and cost effectiveness for vault operation. As the next step (Phase II) of continued vault testing for the ARG-US system, the Savannah River Site K Area Material Storage facility has placed the ARG-US RFIDs into the 910B storage vault. Deploying the ARG-US RFID system lends to a reduced need for manned surveillance and increased inventory periods by providing real-time access to status and event history traceability, including radiation and environmental monitoring. The successful completion of the testing program will provide field data to support future development and testing.« less

A Summary of Research and Progress on Carbon Monoxide Exposure Control Solutions on Houseboats

PubMed Central

Hall, Ronald M.; Earnest, G. Scott; Hammond, Duane R.; Dunn, Kevin H.; Garcia, Alberto

2015-01-01

Investigations of carbon monoxide (CO-related poisonings and deaths on houseboats were conducted by the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. These investigations measured hazardous CO concentrations on and around houseboats that utilize gasoline-powered generators. Engineering control devices were developed and tested to mitigate this deadly hazard. CO emissions were measured using various sampling techniques which included exhaust emission analyzers, detector tubes, evacuated containers (grab air samples analyzed by a gas chromatograph), and direct-reading CO monitors. CO results on houseboats equipped with gasoline-powered generators without emission controls indicated hazardous CO concentrations exceeding immediately dangerous to life and health (IDLH) levels in potentially occupied areas of the houseboat. Air sample results on houseboats that were equipped with engineering controls to remove the hazard were highly effective and reduced CO levels by over 98% in potentially occupied areas. The engineering control devices used to reduce the hazardous CO emissions from gasoline-powered generators on houseboats were extremely effective at reducing CO concentrations to safe levels in potentially occupied areas on the houseboats and are now beginning to be widely used. PMID:24568306

Are emergency care nurses prepared for chemical, biological, radiological, nuclear or explosive incidents?

PubMed

Mitchell, Christina J; Kernohan, W George; Higginson, Ray

2012-07-01

Two main areas exist within emergency care where chemical, biological, radiological, nuclear and explosive preparedness can be focused: departmental preparedness and staff preparedness. This study focused upon the latter. To identify areas where nurses require training in order to improve preparedness for a CBRNe incident. A competency questionnaire was developed from the literature and completed by 50 nursing staff across three Emergency Departments within one NHS Trust in Northern Ireland. Descriptive analysis was used for the quantitative data along with content analysis for the qualitative questions. Six key areas were identified for training; waste management (including clinical waste, contaminated clothing, contaminated water and the management of the contaminated deceased), Triage, Chain of command, PODs, awareness of the range of Personal Protective Equipment and its appropriate use and the decontamination of people and equipment. There is a need for a standardised 'blueprint' of role-specific competency criteria for a CBRNe incident for all emergency healthcare staff. The assessment tool used in this study can help to assess levels of preparedness amongst nursing staff and, if adapted accordingly, help gauge preparedness of other key healthcare professionals. Copyright © 2011 Elsevier Ltd. All rights reserved.

A summary of research and progress on carbon monoxide exposure control solutions on houseboats.

PubMed

Hall, Ronald M; Earnest, G Scott; Hammond, Duane R; Dunn, Kevin H; Garcia, Alberto

2014-01-01

Investigations of carbon monoxide (CO-related poisonings and deaths on houseboats were conducted by the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. These investigations measured hazardous CO concentrations on and around houseboats that utilize gasoline-powered generators. Engineering control devices were developed and tested to mitigate this deadly hazard. CO emissions were measured using various sampling techniques which included exhaust emission analyzers, detector tubes, evacuated containers (grab air samples analyzed by a gas chromatograph), and direct-reading CO monitors. CO results on houseboats equipped with gasoline-powered generators without emission controls indicated hazardous CO concentrations exceeding immediately dangerous to life and health (IDLH) levels in potentially occupied areas of the houseboat. Air sample results on houseboats that were equipped with engineering controls to remove the hazard were highly effective and reduced CO levels by over 98% in potentially occupied areas. The engineering control devices used to reduce the hazardous CO emissions from gasoline-powered generators on houseboats were extremely effective at reducing CO concentrations to safe levels in potentially occupied areas on the houseboats and are now beginning to be widely used.

Ultra-Dense Optical Mass Storage

DTIC Science & Technology

1991-02-11

Technologies develops equipment for telephone company central offices which allows users within a local area to have personal mailboxes for voicemail and FAX...externally applied stress field can alter the energy level of a molecule by slightly dis- torting the local environment surrounding the photochemical...permit us to raise the temperature even further during part of the channel creation process. It is probably reasonable to assume that local heating

RD and A Management Guide, 12th Edition (Revision)

DTIC Science & Technology

1993-02-01

systems, types of aircraft; and astronautic publication and printing matters. vehicles. 6000 Series-Medicine and Dentistry . Medical 16000 Series-Coast...medicine, used by Navy or Marine Corps activities. dentistry , and medical equipment and supplies. 7000 Series-Financial Management. Financial C9.2...decisions development facilities. D-4 D4.2 Each center gathers information in its Crew Systems Ergonomics Information specialized area of interest

Development of new microwave-drying and straightening technology for low-value curved timber

Treesearch

John F. Hunt; Hongmei Gu; Philip Walsh; Jerrold E. Winandy

2005-01-01

A considerable amount of small-diameter, branched, or curved timber is currently left standing, bucked and left on the ground, chipped, or burned after logging or thinning operations. Most North American mills are not equipped to handle this low-value material. In many areas of the western United States, such forest residue does not decompose and becomes susceptible to...

IET. Control and equipment building (TAN620) floor plan. Schedule of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

IET. Control and equipment building (TAN-620) floor plan. Schedule of furniture and equipment. Ralph M. Parsons 902-4-ANP-A 320. Date: February 1954. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0620-00-693-106905 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

30 CFR 77.807-3 - Movement of equipment; minimum distance from high-voltage lines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... high-voltage lines. 77.807-3 Section 77.807-3 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.807-3 Movement of equipment; minimum distance from high-voltage lines. When any part of any equipment operated on the surface of any...

17. Perimeter acquisition radar building room #105, mechanical equipment room ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Perimeter acquisition radar building room #105, mechanical equipment room no. 1; sign reads: Heat exchangers (shell and tube type). Provide precise temperature control of water for cooling critical electronic equipment - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND

Computed Tomography (CT) Scans and Cancer

MedlinePlus

... an imaging procedure that uses special x-ray equipment to create detailed pictures, or scans, of areas ... at the center ( 10 ). In addition, all imaging equipment purchased by NIH must provide data on exposure ...

A Cognitive System Model for Human/Automation Dynamics in Airspace Management

NASA Technical Reports Server (NTRS)

Corker, Kevin M.; Pisanich, Gregory; Lebacqz, J. Victor (Technical Monitor)

1997-01-01

NASA has initiated a significant thrust of research and development focused on providing the flight crew and air traffic managers automation aids to increase capacity in en route and terminal area operations through the use of flexible, more fuel-efficient routing, while improving the level of safety in commercial carrier operations. In that system development, definition of cognitive requirements for integrated multi-operator dynamic aiding systems is fundamental. In order to support that cognitive function definition, we have extended the Man Machine Integrated Design and Analysis System (MIDAS) to include representation of multiple cognitive agents (both human operators and intelligent aiding systems) operating aircraft, airline operations centers and air traffic control centers in the evolving airspace. The demands of this application require representation of many intelligent agents sharing world-models, and coordinating action/intention with cooperative scheduling of goals and actions in a potentially unpredictable world of operations. The MIDAS operator models have undergone significant development in order to understand the requirements for operator aiding and the impact of that aiding in the complex nondeterminate system of national airspace operations. The operator model's structure has been modified to include attention functions, action priority, and situation assessment. The cognitive function model has been expanded to include working memory operations including retrieval from long-term store, interference, visual-motor and verbal articulatory loop functions, and time-based losses. The operator's activity structures have been developed to include prioritization and interruption of multiple parallel activities among multiple operators, to provide for anticipation (knowledge of the intention and action of remote operators), and to respond to failures of the system and other operators in the system in situation-specific paradigms. The model's internal representation has been be modified so that multiple, autonomous sets of equipment will function in a scenario as the single equipment sets do now. In order to support the analysis requirements with multiple items of equipment, it is necessary for equipment to access the state of other equipment objects at initialization time (a radar object may need to access the position and speed of aircraft in its area, for example), and as a function of perception and sensor system interaction. The model has been improved to include multiple world-states as a function of equipment am operator interaction. The model has been used -1o predict the impact of warning and alert zones in aircraft operation, and, more critic-ally, the interaction of flight-deck based warning mechanisms and air traffic controller action in response to ground-based conflict prediction and alerting systems. In this operation, two operating systems provide alerting to two autonomous, but linked sets of operators, whose view of the system and whose dynamics in response are radically different. System stability and operator action was predicted using the MIDAS model.

A time-based concept for terminal-area traffic management

NASA Technical Reports Server (NTRS)

Erzberger, Heinz; Tobias, Leonard

1986-01-01

An automated air-traffic-management concept that has the potential for significantly increasing the efficiency of traffic flows in high-density terminal areas is discussed. The concept's implementation depends on techniques for controlling the landing time of all aircraft entering the terminal area, both those that are equipped with on-board four-dimensional (4D) guidance systems as well as those aircraft types that are conventionally equipped. The two major ground-based elements of the system are a scheduler which assigns conflict-free landing times and a profile descent advisor. Landing time provided by the scheduler is uplinked to equipped aircraft and translated into the appropriate 4D trajectory by the-board flight-management system. The controller issues descent advisories to unequipped aircraft to help them achieve the assigned landing times. Air traffic control simulations have established that the concept provides an efficient method for controlling various mixes of 4D-equipped and unequipped, as well as low- and high-performance, aircraft. Piloted simulations of profiles flown with the aid of advisories have verified the ability to meet specified descent times with prescribed accuracy.

Distributed photovoltaic systems - Addressing the utility interface issues

NASA Astrophysics Data System (ADS)

Firstman, S. I.; Vachtsevanos, G. J.

This paper reviews work conducted in the United States on the impact of dispersed photovoltaic sources upon utility operations. The photovoltaic (PV) arrays are roof-mounted on residential houses and connected, via appropriate power conditioning equipment, to the utility grid. The presence of such small (4-6 Kw) dispersed generators on the distribution network raises questions of a technical, economic and institutional nature. After a brief identification of utility interface issues, the paper addresses such technical concerns as protection of equipment and personnel safety, power quality and utility operational stability. A combination of experimental and analytical approaches has been adopted to arrive at solutions to these problems. Problem areas, under various PV system penetration scenarios, are identified and conceptual designs of protection and control equipment and operating policies are developed so that system reliability is maintained while minimizing capital costs. It is hoped that the resolution of balance-of-system and grid interface questions will ascertain the economic viability of photovoltaic systems and assist in their widespread utilization in the future.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatmentmore » centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.« less

Apparatus analysis and preliminary design of low gravity porous solids experiment for STS Orbiter mid-deck

NASA Technical Reports Server (NTRS)

Fleeter, R. D.; Kropp, J. L.

1983-01-01

The apparatus analysis laboratory equipment design and fabrication and the preliminary design of the Combustion of Porous Solids Experiment for operation in the mid-deck area of the Shuttle are described. The apparatus analysis indicated that the mid-deck region of the STS was a feasible region of the Shuttle for operation. A sixteen tube concept was developed with tubes of 75 cm length and up to 5.6 cm accommodated. The experiment is viewed by IR sensors and a 16 mm camera. Laboratory equipment was designed and fabricated to test the parible injection, mixing and venting concepts. This equipment was delivered to NASA/LeRC. A preliminary design was made for the experiment based upon the apparatus analysis. The design incorporated results from the Phase ""O'' Safety Review. This design utilizes a closed tube concept in which the particles are stored, injected and burned with no coupling to the Shuttle environment. Drawings of the major components and an assembly are given. The electronics are described for the experiment. An equipment list is presented and an experiment weight estimate is determined. The mission operation requirements are outlined.

4. "LAUNCH SILOS, EQUIPMENT ROOMS SECTIONS AND DETAILS." Specifications ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. "LAUNCH SILOS, EQUIPMENT ROOMS - SECTIONS AND DETAILS." Specifications No. ENG-04-353-59-73; Drawing No. 5841S-5; D.O. SERIES AW-1525/28; Stamped: RECORD DRAWING AS CONSTRUCTED. Below Stamp: Contract No. 6601, Date 18 Sep 59. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Missile Silo Type, Test Area 1-100, northeast end of Test Area 1-100 Road, Boron, Kern County, CA

5. "LAUNCH SILOS; EQUIP. ROOM; SECTIONS AND DETAILS." Specifications No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. "LAUNCH SILOS; EQUIP. ROOM; SECTIONS AND DETAILS." Specifications No. ENG-04-353-59-73; Drawing No. 5841S-6; D.O. SERIES AW-1525/29; Stamped: RECORD DRAWING AS CONSTRUCTED. Below stamp: Contract No. 6601, Date 18 Sep 59. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Missile Silo Type, Test Area 1-100, northeast end of Test Area 1-100 Road, Boron, Kern County, CA

30 CFR 56.4230 - Self-propelled equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... other persons in the area, a fire extinguisher shall be on the equipment or within 100 feet of the... size that can extinguish fires of any class in their early stages which could originate from the...

PBF (PER620) interior, basement level. Sampling equipment. Date: May 2004. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, basement level. Sampling equipment. Date: May 2004. INEEL negative no. HD-41-5-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

ARCHITECTURAL, 777M, PHYSICS ASSEMBLY LABORATORY BUILDING, EQUIPMENT ARRANGEMENT – SECTIONS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ARCHITECTURAL, 777-M, PHYSICS ASSEMBLY LABORATORY BUILDING, EQUIPMENT ARRANGEMENT – SECTIONS “B” AND “C” (W157132) - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC

IET control building (TAN620). interior room. sign says, "emergency equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

IET control building (TAN-620). interior room. sign says, "emergency equipment for metal fires." INEEL negative no. HD-21-1-2 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Survey of New Jersey Public School Districts Using Computers and Data Entry Equipment.

ERIC Educational Resources Information Center

Gaydos, Irvin A.

The twelve tables in this study represent the results of a Fall 1975 survey of the 589 operating school districts in the State of New Jersey to determine the status of computer and data entry equipment utilization. Results show that the number of users of this equipment increased noticeably, primarily in administrative processing areas such as…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Dave; Stephan, Eric G.; Wang, Weimin

Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability liemore » the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.« less

Nuclear Research Reactor IEA-R1 - A Study of the Preparing for Decommissioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopes, Valdir Maciel; Filho, Tufic Madi; Ricci, Walter

2015-07-01

The Institute of Energy and Nuclear Research (IPEN), Sao Paulo, according to the assignments given by the National Commission of Nuclear Energy (CNEN), enabled the development of this study, especially operational reports about refurbishing carried out on 2013, involving the production of radioisotopes and research in the areas of Radiochemistry and Nuclear Physics. These reports are made in accordance with established standard procedures to meet the requirements of CNEN (National Nuclear Energy Commission, the regulator the nuclear area activities in Brazil) and IAEA (International Atomic Energy Agency). This study presents an assessment of the procedures and methods of treatments formore » decontamination of the refrigeration primary circuit and changes parts, equipment and tubes of the of the IEA-R1 nuclear research reactor, pool type, power between 3,5 and 4,5 MW. In order to have a sequence in the work, the well-known contaminant radioisotopes were evaluated firstly, using Geiger- Muller equipment. In the second phase, the decontamination was done manually together with the ultrasound cleaning and washing equipment. From the several water solutions of citric acid assessment, the concentration with better confidence was obtained; in order to achieve the best results for decontamination. This study intends to define the best process for decontamination with low taxes of waste and without expensive costs. (authors)« less

Life sciences payload definition and integration study. Volume 1: Executive summary. [carry-on laboratory for Spacelab

NASA Technical Reports Server (NTRS)

1974-01-01

The definition and integration tasks involved in the development of design concepts for a carry-on laboratory (COL), to be compatible with Spacelab operations, were divided into the following study areas: (1) identification of research and equipment requirements of the COL; (2) development of a number of conceptual layouts for COL based on the defined research of final conceptual designs; and (4) development of COL planning information for definition of COL/Spacelab interface data, cost data, and program cost schedules, including design drawings of a selected COL to permit fabrication of a functional breadboard.

Systems design study of the Pioneer Venus spacecraft. Volume 2. Preliminary program development plan

NASA Technical Reports Server (NTRS)

1973-01-01

The preliminary development plan for the Pioneer Venus program is presented. This preliminary plan treats only developmental aspects that would have a significant effect on program cost. These significant development areas were: master program schedule planning; test planning - both unit and system testing for probes/orbiter/ probe bus; ground support equipment; performance assurance; and science integration Various test planning options and test method techniques were evaluated in terms of achieving a low-cost program without degrading mission performance or system reliability. The approaches studied and the methodology of the selected approach are defined.

Performance measurement integrated information framework in e-Manufacturing

NASA Astrophysics Data System (ADS)

Teran, Hilaida; Hernandez, Juan Carlos; Vizán, Antonio; Ríos, José

2014-11-01

The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

NASA Technical Reports Server (NTRS)

Sampson, Paul G.; Sny, Linda C.

1992-01-01

The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

Built-In-Test Equipment Requirements Workshop. Workshop Presentation

DTIC Science & Technology

1981-08-01

quantitatively evaluated in test. (2) It is necessary to develop the statistical methods that should be used for predicting and confirming of diagnostic...of different performance levels of BIT peacetime and wartime applications, and the corresponding manpower and other support requirements should be...reports. The scope of the workshop involves the areas of require- ments for built-in-test and diagnostics, and the methods of testing to ensure that the

Developing Qualified Logistics Readiness Officers (LROs) Within Air Combat Command (ACC): A Delphi Study

DTIC Science & Technology

2009-06-01

today face ( Lovewell , 2007). Although the model equips LROs with the understanding of most basic logistics processes, it falls short to deliver a...areas to the degree the operations tempo requires ( Lovewell , 2007). Due to recent changes in mission requirements and organizational re-structuring...the current CFETP appears to be outdated ( Lovewell , 2007). 6 Base-Level Training Guiding the officer to fulfill their training

North Base Industrial Area Development Plan Environmental Assessment

DTIC Science & Technology

2006-03-01

100 to 29.1-570 (Department of Game and Inland Fisheries) State Tributyltin ( TBT ) Program. VAC 3.1-249.59 to 3.1-249.62 Stresses the conservation...be classified as hazardous because of its toxicity , reactivity, ignitibility, or corrosivity. In addition, certain types of waste are “listed” or...personal protective equipment, construction inspection, the disposal of lead-based paint-containing wastes, and lead toxicity investigations (Air

The Integration Role of European Defense Procurement in Achieving a More Competitive and Stronger European Defense Equipment Market

DTIC Science & Technology

2015-06-01

Stockholm International Peace Research Institute (SIPRI) yearbooks, published documents of EU governments, annual reports and studies , and others. The main...the framework of impact assessment. In this context, five studies were commissioned, in particular to collect more 48 quantitative information...military spending, in particular in the defense procurement and research and development areas, has been negatively affecting defense companies in

Exotism of Batu Putih area in Samarinda, East Kalimantan as conservation area for ecotourism destination

NASA Astrophysics Data System (ADS)

Sutan, Syamsidar; Cahyani, Rina Wahyu; Alam, Fajar; Syuhada, Endy Mukhlis

2017-02-01

Batu Putih is a limestone hill complex in Air Putih area, Samarinda, East Kalimantan. The unique value of this region is a towering limestone ridge which easily recognizable at a distance, water catchment area in the city, great place to learn earth science as understanding the ancient marine deposition and hydrocarbon potential development, and the heritage of the region. The objective of this research is toreview the potential of Batu Putih area and surrounding as a green conservation area for ecotourism destination. Batu Putih area, geologically part of Kutai Basin, is controlled by tectonic event, resulted on Northeast-Southwest undulated trend known as Samarinda anticlinorium. Data collected cover several aspects: (1) geological aspects: various types of rocks, groundwater condition and other related data; (2) vegetation aspects; (3) cultural aspect: heritage and historical place. By results from evaluation of existing data, development plan will be commenced. Research found 2 spots for landscape viewing, 3 water resources, various marine fossils in some locations and mud volcano. Vegetations are dominated by "kersen" (Muntingia calabura L.), "aren" (Arenga pinnata) and "pletekan" (Ruellia tuberosa). Based on the findings of the existing kinds of uniqueness, conservation of the area are mandatories. Protection and preservation of the region in integrated manner and area development for ecotourism and education are things should be done in Batu Putih, as increasingly damaged and depleted by limestone mining activities using heavy equipment.

Cooperative Monitoring Center Occasional Paper/16: The Potential of Technology for the Control of Small Weapons: Applications in Developing Countries

DOE Office of Scientific and Technical Information (OSTI.GOV)

ALTMANN, JURGEN

2000-07-01

For improving the control of small arms, technology provides many possibilities. Present and future technical means are described in several areas. With the help of sensors deployed on the ground or on board aircraft, larger areas can be monitored. Using tags, seals, and locks, important objects and installations can be safeguarded better. With modern data processing and communication systems, more information can be available, and it can be more speedily processed. Together with navigation and transport equipment, action can be taken faster and at greater range. Particular considerations are presented for cargo control at roads, seaports, and airports, for monitoringmore » designated lines, and for the control of legal arms. By starting at a modest level, costs can be kept low, which would aid developing countries. From the menu of technologies available, systems need to be designed for the intended application and with an understanding of the local conditions. It is recommended that states start with short-term steps, such as acquiring more and better radio transceivers, vehicles, small aircraft, and personal computers. For the medium term, states should begin with experiments and field testing of technologies such as tags, sensors, and digital communication equipment.« less

21. Perimeter acquisition radar building room #200, electrical equipment room ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Perimeter acquisition radar building room #200, electrical equipment room - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND

Implementation of GPS controlled highway construction equipment.

DOT National Transportation Integrated Search

2007-04-01

dozers, motor graders, and excavators is quickly becoming common place in private sector construction because it speeds project delivery and cuts costs. Use of this technology is expanding quickly into other construction equipment areas such as paver...

PBF (PER620) interior, first basement level. Sampling equipment. Date: March ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, first basement level. Sampling equipment. Date: March 2004. INEEL negative no. HD-41-4-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Raymond Hansen | NREL

Science.gov Websites

Raymond Hansen Photo of Raymond Hansen Raymond Hansen Industrial Research Equipment Technician Pyrolysis Areas of Expertise Industrial equipment fabrication specialist Pilot plant operator/trainer Education Industrial Science Program, Red Rocks Community College, 2006-present Professional Experience

10. INTERIOR VIEW TO THE SOUTHEAST OF INSTRUMENTS AND EQUIPMENT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. INTERIOR VIEW TO THE SOUTHEAST OF INSTRUMENTS AND EQUIPMENT IN ROOM 1. - Nevada Test Site, Test Cell A Facility, Test Cell A Building & Addition, Area 25, Jackass Flats, Road F, Mercury, Nye County, NV

11. INTERIOR VIEW TO THE SOUTH OF INSTRUMENTS AND EQUIPMENT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. INTERIOR VIEW TO THE SOUTH OF INSTRUMENTS AND EQUIPMENT IN ROOM 1. - Nevada Test Site, Test Cell A Facility, Test Cell A Building & Addition, Area 25, Jackass Flats, Road F, Mercury, Nye County, NV

General view of the middeck area looking forward and starboard. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the mid-deck area looking forward and starboard. On the far left of the images are the avionics equipment bays. During missions the forward avionics bays would be fronted by lockers for mission equipment and the flight crew's personal equipment. Sleep stations would be located along the far wall if the orbiter was in a flight ready configuration. The hose and ladder on the right side of the image are pieces of ground support equipment. The hose is part of the climate control apparatus used while orbiters are being processed. The ladder is used to access the inter-deck passage, leading to the flight deck, while the orbiter is in 1g (earth's gravity). This view was taken in the Orbiter Processing Facility at the Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Feasibility of Isolating Vulnerable Equipment of the Electric Power System from Sources of EMP

DTIC Science & Technology

1978-03-01

Utilities, Colorado Springs, Colorado . Mr. Hugh Chastain, LaPlata Electric Association, Durango , Colcrado. Mr. Robert Kerger and Mr. James Ware...electric power systems, and (b) single-line diagrams for powar systems In the State of Colorado . 2. Determine the feanibility of manual isolation of...vulnerable equipment upon receipt ot’ attack warning. Feasibility should be studied in Colorado Syrings (risk area) and Fr-eemont County (host area) of

Acoustic Conditioning System Development and Conditioning Experiments on Black Seabreams in the Xiangshan Bay Sea Ranch

NASA Astrophysics Data System (ADS)

Hu, Qingsong; Rahman, Hafiz Abd ur; Jiang, Yazhou; Zhang, Shouyu; Shentu, Jikang

2018-06-01

Attracting released hatchery-reared fish to designated areas during the growth process is vital to realize the objectives of sea ranching. Based on the bottom artificial reefs and surface kelp culture facilities in the Xiangshan Bay sea ranch, we proposed systematic techniques related to acoustic conditioning of the black seabream ( Sparus macrocephalus). Experiments conducted in 12 m × 10 m × 1.6 m ponds on Xixuan Island showed that black seabream was positively sensitive to 500-600 Hz periodic signals. Conditioned responses were apparent after 8 d. Two to three days were required for recovery of the memory of a conditioned response after a 20-day interval. According to the practical application requirements in the open sea, unattended acoustic conditioning equipment was developed. The ranching equipment was used in 12 m × 12 m × 2.5 m cages, and the behavior of black seabream juveniles was successfully guided after 7 days. Of the 16000 released fish, 82.5% of them were conditioned with a flexible grading net. To avoid inducing a stress response, the juveniles were released into the sea ranch in situ from the net cage. The acoustic conditioning equipments were moved into the open sea and the aggregation phenomenon of the released fish was observed when the sound was played. After 6 months of investigation and based on Sr+ marking, only one acoustically conditioned fish was found outside the 3.5-km2 sea ranch area, thereby reached the goal of guiding activity. The practical effect in the Xiangshan Bay sea ranch showed the validity of the acoustic conditioning system, which may contribute to improve the operation of the sea ranches in the East China Sea.

Health education of population in conection with widespread use of laser radiation

NASA Astrophysics Data System (ADS)

Kashuba, V. A.; Bykhovskiy, A. V.

1984-06-01

Rapid development of laser technology and its adaptation in many areas of national economy make it mandatory to develop a state system of laser safety. Due to absence of visible injuries of those working with laser equipment, a certain degree of bravado has developed among the technical personnel servicing laser instruments. There are no courses available for technicians and professionals concerning safety procedures. To solve this problem, a coordinated program must be organized country-wide with cooperation of physicians, labor safety specialists, preventive medicine experts and hygienists. Stressing the preventive aspects, this effort should lead to development of sound habits and proper technical knowhow.

Conditions and development case studies for mountainous deposits in Siberia

NASA Astrophysics Data System (ADS)

Talgamer, B. L.; Franchuk, A. V.

2017-10-01

The article contains the materials on deposits development intensification under challenging climatic and mining conditions, including mountainous areas of Siberia. The exploitation case studies for mountainous deposits all over the world and in Russia have been described. The authors have been set out the factors impeding the development of such deposits, and the extent of mining and transportation equipment performance degradation is also indicated. There have been stated the characteristics and the description of one of the newly mountainous gold ore deposits in Siberia which is being developed at an altitude of 2684m. A number of specific factors concerning its development have also been introduced as well as the description of mining technologies engineered by Irkutsk National Research Technical University (IRNRTU) specialists. The depth and principal dimensions of the open pit together with the mining and transportation equipment and facilities have been justified. The prime cost analysis of mineral extraction has been made, which results showed the substantial growth in expenditures for the transportation of the overburden rocks and ores. In view of the above mentioned research, there appeared the necessity for the search of new and the enhancement of current transport vehicles and communications.

EGSE (Electrical Ground Support Equipment) for ESA VEGA Launcher

NASA Astrophysics Data System (ADS)

Ferrante, M.; Ortenzi, A.; del Re, V.; Bordin, M.; Saccucci, Fr.

2004-08-01

Activities belonging to Assembly, Integration and Validation (AIV) phase of a launch vehicle are fundamental in development of a so much delicate system. The equipment used to support this long and crucial phase can be described as a set of Mechanical and Electrical Ground Support Equipment (EGSE). This paper describes the approach followed to develop such a system, and the benefits that this brings in terms of lower risk, more coordinated interfaces and improved functionality. The paper briefly outlines VEGA Electrical Ground Support Equipment major characteristics. In particular, this paper describes the EGSE design for a small launch vehicle such as VEGA. The objective of EGSE is to provide hardware and software for efficient electrical testing of either single stages and integrated launcher. The needs to develop a small launcher is a response to a Resolution in the Space Transportation Strategy adopted by the ESA Council in June 2000, aiming at: "completing, in the medium term, the range of launch services offered by the addition of European manufactured small and medium launcher, complementary to Ariane, consistent with diversified users' needs and relying on common elements, such as stages, subsystems, technologies, production facilities and operational infrastructure, thereby increasing the European launcher industry's competitiveness". Three different parts principally compose the Vega EGSE: TCS (Test Configuration System), TES (Test Execution System), PPS (Post Processing System). The TES is the part of the EGSE devoted to the tests execution; it has capabilities of immediate test data analysis, parameters monitoring and it is able to undertake pre-defined actions, in case of anomalous events happen, in order to put in safe conditions the Unity Under Test (UUT). The TES is composed of two main components: HLCS and LLCS. The HLCS is based on SCOS 2000 ESA product; it is mainly devoted to the interaction with operators. It allows loading Test Sequences and sending commands to the LLCS, thereafter retrieving and displaying the results. The LLCS is the EGSE part closest to the UUT and directly connected to it. It is in charge of monitoring and commanding the UUT, reacting in real-time to both nominal and anomalous events and to ensure safety conditions during the execution of test sessions, even in absence of connection with the HLCS. To perform the tests of VEGA launcher three test areas are foreseen: one for each VEGA launcher stage, except for the third and the second stages that are tested in the same test area. One of these areas is also used to perform the test of complete VEGA launcher. In order to perform all tests, the LLCS is composed of modular subsystems able to work either independently in different test areas or in jointure in the main test area The TCS is the part devoted to the configuration of the EGSE, during the configuration phase it is possible to configure all components of EGSE depending on the test session to be performed. The PPS is the part devoted to the test results post processing. The PPS allows retrieving, analysis and displaying of the data generated in the test execution phases.

Local Technical Resources for Development of Seismic Monitoring in Caucasus and Central Asia - GMSys2009 Data Acquisition System

NASA Astrophysics Data System (ADS)

Chkhaidze, D.; Basilaia, G.; Elashvili, M.; Shishlov, D.; Bidzinashvili, G.

2012-12-01

Caucasus and Central Asia represents regions of high seismic activity, composing a significant part of Alpine-Himalayan continental collision zone. Natural catastrophic events cause significant damage to the infrastructure worldwide, among these approximately ninety percent of the annual loss is due to earthquakes. Monitoring of Seismic Activity in these regions and adequate assessment of Seismic Hazards represents indispensible condition for safe and stable development. Existence of critical engineering constructions in the Caucasus and Central Asia such as oil and gas pipelines, high dams and nuclear power plants dramatically raises risks associated with natural hazards and eliminates necessity of proper monitoring systems. Our initial efforts were focused on areas that we are most familiar; the geophysical community in the greater Caucuses and Central Asia experiencing many of the same problems with the monitoring equipment. As a result, during the past years GMSys2009 was develop at the Institute of Earth Sciences of Ilia State University. Equipment represents a cost-effective, multifunctional Geophysical Data Acquisition System (DAS) to monitor seismic waves propagating in the earth and related geophysical parameters. Equipment best fits local requirements concerning power management, environmental protection and functionality, the same time competing commercial units available on the market. During past several years more than 30 units were assembled and what is most important installed in Georgia, Armenia, Azerbaijan and Tajikistan. GMSys2009 utilizes standard MiniSEED data format and data transmission protocols, making it possible online waveform data sharing between the neighboring Countries in the region and international community. All the mentioned installations were technically supported by the group of engineers from the Institute of Earth Sciences, on site trainings for local personnel in Armenia, Azerbaijan and Tajikistan was provided creating a good basis for successful functioning of the equipment.

Characterization of ambient particles size in workplace of manufacturing physical fitness equipments

PubMed Central

LIN, Chih-Chung; CHEN, Mei-Ru; CHANG, Sheng-Lang; LIAO, Wei-Heng; CHEN, Hsiu-Ling

2014-01-01

The manufacturing of fitness equipment involves several processes, including the cutting and punching of iron tubes followed by welding. Welding operations produce hazardous gases and particulate matter, which can enter the alveolar, resulting in adverse health effects. This study sought to verify the particle size distribution and exposure concentrations of atmospheric air samples in various work areas of a fitness equipment manufacturing industry. Observed particle concentrations are presented by area and in terms of relative magnitude: painting (15.58 mg/m3) > automatic welding (0.66 mg/m3) > manual welding (0.53 mg/m3) > punching (0.18 mg/m3) > cutting (0.16 mg/m3). The concentrations in each of the five work areas were Cinh>Cthor>Cresp. In all areas except the painting area, extra-fine particles produced by welding at high temperatures, and further those coagulated to form larger particles. This study observed bimodal distribution in the size of welding fume in the ranges of 0.7–1 µm and 15–21 µm. Meanwhile, the mass concentrations of particles with different sizes were not consistent across work areas. In the painting area, the mass concentration was higher in Chead>Cth>Calv, but in welding areas, it was found that Calv>Chead>Cth. Particles smaller than 1µm were primarily produced by welding. PMID:25327301

Cost analysis of life support systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

A methodology was developed to predict realistic relative cost of Life Support Systems (LSS) and to define areas of major cost impacts in the development cycle. Emphasis was given to tailoring the cost data for usage by program planners and designers. The equipment classifications used based on the degree of refinement were as follows: (1) Working model; (2) low-fidelity prototype; (3) high-fidelity prototype; and (4) flight-qualified system. The major advanced LSS evaluated included the following: (1) Carbon dioxide removal; (2) oxygen recovery systems; (3) water recovery systems; (4) atmosphere analysis system.

Development of a filter regeneration system for advanced spacecraft fluid systems

NASA Technical Reports Server (NTRS)

Behrend, A. F., Jr.; Descamp, V. A.

1974-01-01

The development of a filter regeneration system for efficiently cleaning fluid particulate filters is presented. Based on a backflush/jet impingement technique, the regeneration system demonstrated a cleaning efficiency of 98.7 to 100%. The operating principles and design features are discussed with emphasis on the primary system components that include a regenerable filter, vortex particle separator, and zero-g particle trap. Techniques and equipment used for ground and zero-g performance tests are described. Test results and conclusions, as well as possible areas for commercial application, are included.

Flat-plate solar-array project. Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The engineering design, fabrication, assembly, operation, economic analysis, and process support R and D for an Experimental Process System Development Unit (EPSDU) are reported. About 95% of purchased equipment is received and will be reshipped to the West Coast location. The Data Collection System is completed. In the area of melting/consolidation, to the system using silicon powder transfer, melting and shotting on a pseudocontinuous basis is demonstrated. It is proposed to continue the very promising fluid bed work.

Japan's technology and manufacturing infrastructure

NASA Astrophysics Data System (ADS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-02-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Japan's technology and manufacturing infrastructure

NASA Technical Reports Server (NTRS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-01-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Investigation of the performance characteristics of Doppler radar technique for aircraft collision hazard warning, phase 3

NASA Technical Reports Server (NTRS)

1972-01-01

System studies, equipment simulation, hardware development and flight tests which were conducted during the development of aircraft collision hazard warning system are discussed. The system uses a cooperative, continuous wave Doppler radar principle with pseudo-random frequency modulation. The report presents a description of the system operation and deals at length with the use of pseudo-random coding techniques. In addition, the use of mathematical modeling and computer simulation to determine the alarm statistics and system saturation characteristics in terminal area traffic of variable density is discussed.

Pediatric critical incidents reported over 15 years at a tertiary care teaching hospital of a developing country.

PubMed

Abbasi, Shemila; Khan, Fauzia Anis; Khan, Sobia

2018-01-01

The role of critical incident (CI) reporting is well established in improving patient safety but only a limited number of available reports relate to pediatric incidents. Our aim was to analyze the reported CIs specific to pediatric patients in our database and to reevaluate the value of this program in addressing issues in pediatric anesthesia practice. Incidents related to pediatric population from neonatal period till the age of 12 years were selected. A review of all CI records collected between January 1998 and December 2012, in the Department of Anaesthesiology of Aga Khan University hospital was done. This was retrospective form review. The Department has a structured CI form in use since 1998 which is intermittently evaluated and modified if needed. A total of 451 pediatric CIs were included. Thirty-four percent of the incidents were reported in infants. Ninety-six percent of the reported incidents took place during elective surgery and 4% during emergency surgery. Equipment-related events (n = 114), respiratory events (n = 112), and drug events (n = 110) were equally distributed (25.6%, 25.3%, and 24.7%). Human factors accounted for 74% of reports followed by, equipment failure (10%) and patient factors (8%). Only 5% of the incidents were system errors. Failure to check (equipment/drugs/doses) was the most common cause for human factors. Poor outcome was seen in 7% of cases. Medication and equipment are the clinical areas that need to be looked at more closely. We also recommend quality improvement projects in both these areas as well as training of residents and staff in managing airway-related problems in pediatric patients.

Preliminary Study of UAS Equipped with Thermal Camera for Volcanic Geothermal Monitoring in Taiwan

PubMed Central

Chio, Shih-Hong; Lin, Cheng-Horng

2017-01-01

Thermal infrared cameras sense the temperature information of sensed scenes. With the development of UASs (Unmanned Aircraft Systems), thermal infrared cameras can now be carried on a quadcopter UAV (Unmanned Aircraft Vehicle) to appropriately collect high-resolution thermal images for volcanic geothermal monitoring in a local area. Therefore, the quadcopter UAS used to acquire thermal images for volcanic geothermal monitoring has been developed in Taiwan as part of this study to overcome the difficult terrain with highly variable topography and extreme environmental conditions. An XM6 thermal infrared camera was employed in this thermal image collection system. The Trimble BD970 GNSS (Global Navigation Satellite System) OEM (Original Equipment Manufacturer) board was also carried on the quadcopter UAV to gather dual-frequency GNSS observations in order to determine the flying trajectory data by using the Post-Processed Kinematic (PPK) technique; this will be used to establish the position and orientation of collected thermal images with less ground control points (GCPs). The digital surface model (DSM) and thermal orthoimages were then produced from collected thermal images. Tests conducted in the Hsiaoyukeng area of Taiwan’s Yangmingshan National Park show that the difference between produced DSM and airborne LIDAR (Light Detection and Ranging) data are about 37% between −1 m and 1 m, and 66% between −2 m and 2 m in the area surrounded by GCPs. As the accuracy of thermal orthoimages is about 1.78 m, it is deemed sufficient for volcanic geothermal monitoring. In addition, the thermal orthoimages show some phenomena not only more globally than do the traditional methods for volcanic geothermal monitoring, but they also show that the developed system can be further employed in Taiwan in the future. PMID:28718790

Preliminary Study of UAS Equipped with Thermal Camera for Volcanic Geothermal Monitoring in Taiwan.

PubMed

Chio, Shih-Hong; Lin, Cheng-Horng

2017-07-18

Thermal infrared cameras sense the temperature information of sensed scenes. With the development of UASs (Unmanned Aircraft Systems), thermal infrared cameras can now be carried on a quadcopter UAV (Unmanned Aircraft Vehicle) to appropriately collect high-resolution thermal images for volcanic geothermal monitoring in a local area. Therefore, the quadcopter UAS used to acquire thermal images for volcanic geothermal monitoring has been developed in Taiwan as part of this study to overcome the difficult terrain with highly variable topography and extreme environmental conditions. An XM6 thermal infrared camera was employed in this thermal image collection system. The Trimble BD970 GNSS (Global Navigation Satellite System) OEM (Original Equipment Manufacturer) board was also carried on the quadcopter UAV to gather dual-frequency GNSS observations in order to determine the flying trajectory data by using the Post-Processed Kinematic (PPK) technique; this will be used to establish the position and orientation of collected thermal images with less ground control points (GCPs). The digital surface model (DSM) and thermal orthoimages were then produced from collected thermal images. Tests conducted in the Hsiaoyukeng area of Taiwan's Yangmingshan National Park show that the difference between produced DSM and airborne LIDAR (Light Detection and Ranging) data are about 37% between -1 m and 1 m, and 66% between -2 m and 2 m in the area surrounded by GCPs. As the accuracy of thermal orthoimages is about 1.78 m, it is deemed sufficient for volcanic geothermal monitoring. In addition, the thermal orthoimages show some phenomena not only more globally than do the traditional methods for volcanic geothermal monitoring, but they also show that the developed system can be further employed in Taiwan in the future.

PBF (PER620) interior. System control racks, secondary control and equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior. System control racks, secondary control and equipment room. Date: May 2004. INEEL negative no. HD-41-6-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

2. EXTERIOR VIEW TO THE NORTH OF WATER FILTERING EQUIPMENT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. EXTERIOR VIEW TO THE NORTH OF WATER FILTERING EQUIPMENT AND BROCK HOUSES ALONG THE EAST SIDE OF THE COMPOUND. - Nevada Test Site, Pluto Facility, Area 26, Wahmonie Flats, Cane Spring Road, Mercury, Nye County, NV

21. INTERIOR VIEW TO THE WEST OF EQUIPMENT ABOVE THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. INTERIOR VIEW TO THE WEST OF EQUIPMENT ABOVE THE OFFICE SPACE AT THE WEST END OF ROOM 101. - Nevada Test Site, Pluto Facility, Disassembly Building, Area 26, Wahmonie Flats, Cane Spring Road, Mercury, Nye County, NV

13. INTERIOR VIEW TO THE WEST OF EQUIPMENT IN ROOM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. INTERIOR VIEW TO THE WEST OF EQUIPMENT IN ROOM 2, RADIATION EFFECTS ROOM. - Nevada Test Site, Test Cell A Facility, Test Cell A Building & Addition, Area 25, Jackass Flats, Road F, Mercury, Nye County, NV

Preliminary design report, Large Space Telescope OTA/SI Phase B study: High speed area photometer. [systems analysis

NASA Technical Reports Server (NTRS)

1975-01-01

A photometer is examined which combines several features from separate instruments into a single package. The design presented has both point and area photometry capability with provision for inserting filters to provide spectral discrimination. The electronics provide for photon counting mode for the point detectors and both photon counting and analog modes for the area detector. The area detector also serves as a target locating device for the point detectors. Topics discussed include: (1) electronic equipment requirements, (2) optical properties, (3) structural housing for the instrument, (4) motors and other mechanical components, (5) ground support equipment, and (6) environment control for the instrument. Engineering drawings and block diagrams are shown.

Progress in the development of paper-based diagnostics for low-resource point-of-care settings

PubMed Central

Byrnes, Samantha; Thiessen, Gregory; Fu, Elain

2014-01-01

This Review focuses on recent work in the field of paper microfluidics that specifically addresses the goal of translating the multistep processes that are characteristic of gold-standard laboratory tests to low-resource point-of-care settings. A major challenge is to implement multistep processes with the robust fluid control required to achieve the necessary sensitivity and specificity of a given application in a user-friendly package that minimizes equipment. We review key work in the areas of fluidic controls for automation in paper-based devices, readout methods that minimize dedicated equipment, and power and heating methods that are compatible with low-resource point-of-care settings. We also highlight a focused set of recent applications and discuss future challenges. PMID:24256361

Effects of Perforation on Rigid PU Foam Plates: Acoustic and Mechanical Properties

PubMed Central

Lin, Jia-Horng; Chuang, Yu-Chun; Li, Ting-Ting; Huang, Chen-Hung; Huang, Chien-Lin; Chen, Yueh-Sheng; Lou, Ching-Wen

2016-01-01

Factories today are equipped with diverse mechanical equipment in response to rapid technological and industrial developments. Industrial areas located near residential neighborhoods cause massive environmental problems. In particular, noise pollution results in physical and psychological discomfort, and is a seen as invisible and inevitable problem. Thus, noise reduction is a critical and urgent matter. In this study, rigid polyurethane (PU) foam plates undergo perforation using a tapping machine. The mechanical and acoustic properties of these perforated plates as related to perforation rate and perforation depth are evaluated in terms of compression strength, drop-weight impact strength, and sound absorption coefficient. Experimental results indicate that applying the perforation process endows the rigid PU foaming plates with greater load absorption and better sound absorption at medium and high frequencies. PMID:28774119

Effects of Perforation on Rigid PU Foam Plates: Acoustic and Mechanical Properties.

PubMed

Lin, Jia-Horng; Chuang, Yu-Chun; Li, Ting-Ting; Huang, Chen-Hung; Huang, Chien-Lin; Chen, Yueh-Sheng; Lou, Ching-Wen

2016-12-09

Factories today are equipped with diverse mechanical equipment in response to rapid technological and industrial developments. Industrial areas located near residential neighborhoods cause massive environmental problems. In particular, noise pollution results in physical and psychological discomfort, and is a seen as invisible and inevitable problem. Thus, noise reduction is a critical and urgent matter. In this study, rigid polyurethane (PU) foam plates undergo perforation using a tapping machine. The mechanical and acoustic properties of these perforated plates as related to perforation rate and perforation depth are evaluated in terms of compression strength, drop-weight impact strength, and sound absorption coefficient. Experimental results indicate that applying the perforation process endows the rigid PU foaming plates with greater load absorption and better sound absorption at medium and high frequencies.

Study directed at development of an implantable biotelemetry ion detector

NASA Technical Reports Server (NTRS)

Hanley, L. D.; Kress, D.

1971-01-01

A literature search was conducted to currently update known information in the field of ion-selective electrodes. The review attempts to identify present trends in cation and anions selective electrodes pertinent to the area of bioimplantable units. An electronic circuit was designed to provide the high impedance interface between the ion-selective sensors and signal-processing equipment. The resulting design emphasized the need for low power and miniaturization. Many of the circuits were constructed and used to evaluate the ion-selective electrodes. A cuvette capable of holding the ion-selective and the reference electrodes was designed and constructed. This equipment was used to evaluate commercially available ion-selective electrodes and the electrodes designed and constructed in the study. The results of the electrode tests are included.

Detection of Entamoeba histolytica by Recombinase Polymerase Amplification

PubMed Central

Nair, Gayatri; Rebolledo, Mauricio; White, A. Clinton; Crannell, Zachary; Richards-Kortum, R. Rebecca; Pinilla, A. Elizabeth; Ramírez, Juan David; López, M. Consuelo; Castellanos-Gonzalez, Alejandro

2015-01-01

Amebiasis is an important cause of diarrheal disease worldwide and has been associated with childhood malnutrition. Traditional microscopy approaches are neither sensitive nor specific for Entamoeba histolytica. Antigen assays are more specific, but many cases are missed unless tested by molecular methods. Although polymerase chain reaction (PCR) is effective, the need for sophisticated, expensive equipment, infrastructure, and trained personnel limits its usefulness, especially in the resource-limited, endemic areas. Here, we report development of a recombinase polymerase amplification (RPA) method to detect E. histolytica specifically. Using visual detection by lateral flow (LF), the test was highly sensitive and specific and could be performed without additional equipment. The availability of this inexpensive, sensitive, and field-applicable diagnostic test could facilitate rapid diagnosis and treatment of amebiasis in endemic regions. PMID:26123960

Equipment and Analytical Companies Meeting Continuous Challenges May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

2015-03-01

This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white papers. In the equipment domain, this is equally prevalent among a broad range of companies, mainly focusing on discrete areas. As an example, the flow chemistry and secondary drug product communities are almost entirely disconnected. Control and Process Analytical Technologies (PAT) companies are active in both domains. The equipment actors are a very diverse group with a few major Original Equipment Manufacturers (OEM) players and a variety of SME, project providers, integrators, upstream downstream providers, and specialist PAT. In some cases, partnerships or alliances are formed to increase critical mass. This white paper has focused on small molecules; equipment associated with biopharmaceuticals is covered in a separate white paper. More specifics on equipment detail are provided in final dosage form and drug substance white papers. The equipment and analytical development from laboratory to pilot to production is important, with a variety of sensors and complexity reducing with scale. The importance of robust processing rather than overcomplex control strategy mitigation is important. A search of nonacademic literature highlights, with a few notable exceptions, a relative paucity of material. Much focuses on the economics and benefits of continuous, rather than specifics of equipment issues. The disruptive nature of continuous manufacturing represents either an opportunity or a threat for many companies, so the incentive to change equipment varies. Also, for many companies, the pharmaceutical sector is not actually the dominant sector in terms of sales. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Equipment and analytical companies meeting continuous challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

2015-03-01

This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white papers. In the equipment domain, this is equally prevalent among a broad range of companies, mainly focusing on discrete areas. As an example, the flow chemistry and secondary drug product communities are almost entirely disconnected. Control and Process Analytical Technologies (PAT) companies are active in both domains. The equipment actors are a very diverse group with a few major Original Equipment Manufacturers (OEM) players and a variety of SME, project providers, integrators, upstream downstream providers, and specialist PAT. In some cases, partnerships or alliances are formed to increase critical mass. This white paper has focused on small molecules; equipment associated with biopharmaceuticals is covered in a separate white paper. More specifics on equipment detail are provided in final dosage form and drug substance white papers. The equipment and analytical development from laboratory to pilot to production is important, with a variety of sensors and complexity reducing with scale. The importance of robust processing rather than overcomplex control strategy mitigation is important. A search of nonacademic literature highlights, with a few notable exceptions, a relative paucity of material. Much focuses on the economics and benefits of continuous, rather than specifics of equipment issues. The disruptive nature of continuous manufacturing represents either an opportunity or a threat for many companies, so the incentive to change equipment varies. Also, for many companies, the pharmaceutical sector is not actually the dominant sector in terms of sales. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Laboratory services series: a programmed maintenance system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuxbury, D.C.; Srite, B.E.

1980-01-01

The diverse facilities, operations and equipment at a major national research and development laboratory require a systematic, analytical approach to operating equipment maintenance. A computer-scheduled preventive maintenance program is described including program development, equipment identification, maintenance and inspection instructions, scheduling, personnel, and equipment history.

Upgrading of data acquisition software for centralized radiation monitoring system in Malaysian Nuclear Agency

NASA Astrophysics Data System (ADS)

Yussup, F.; Ibrahim, M. M.; Haris, M. F.; Soh, S. C.; Hasim, H.; Azman, A.; Razalim, F. A. A.; Yapp, R.; Ramli, A. A. M.

2016-01-01

With the growth of technology, many devices and equipments can be connected to the network and internet to enable online data acquisition for real-time data monitoring and control from monitoring devices located at remote sites. Centralized radiation monitoring system (CRMS) is a system that enables area radiation level at various locations in Malaysian Nuclear Agency (Nuklear Malaysia) to be monitored centrally by using a web browser. The Local Area Network (LAN) in Nuclear Malaysia is utilized in CRMS as a communication media for data acquisition of the area radiation levels from radiation detectors. The development of the system involves device configuration, wiring, network and hardware installation, software and web development. This paper describes the software upgrading on the system server that is responsible to acquire and record the area radiation readings from the detectors. The recorded readings are called in a web programming to be displayed on a website. Besides the main feature which is acquiring the area radiation levels in Nuclear Malaysia centrally, the upgrading involves new features such as uniform time interval for data recording and exporting, warning system and dose triggering.

Problems of deep drilling in abnormally pressured zones of the Kara Sea continental shelf

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simonov, V.I.

1996-12-31

There are discussed results of drilling operations in shelf hydrocarbon areas of the Far North of Tyumen Region (Kharassavieskaya, Bovanenkovskaya and Krusenshternskaya ones) and on the Bely Island. The author describes equipment and technologies used, problems arising in the process of operations and possible ways of solving them. Application of the results discussed in the report seems rather attractive in connection with possible realization of joint projects on development of the mentioned areas. Thus, Amoco Eurasia plans to participate in development of Bovanenkovskoye and Novoportovskoye fields. Well planning for Amoco has been done of specialists of ZapSibBurNIPI. Experience of Russianmore » drilling companies in the Yamal area (Far North of Tyumen Region) has proved that well planning for shelf areas requires special attention as drilling-in both overpressured zones (Bovanenkovskoye field) and underpressured ones (Novoportovskoye field) is done actually in balance. Investigated are reasons for such drilling problems as kicks and lost circulation. Taking them into consideration will help to decrease considerably the cost of well drilling in shelf areas.« less

Exposure assessment among US workers employed in semiconductor wafer fabrication.

PubMed

Marano, Donald E; Boice, John D; Munro, Heather M; Chadda, Bandana K; Williams, Michael E; McCarthy, Colleen M; Kivel, Peggy F; Blot, William J; McLaughlin, Joseph K

2010-11-01

To classify 100,081 semiconductor workers employed during 1983-2002, and some as early as 1968, regarding potential for chemical exposures in cleanrooms during silicon wafer fabrication. This study involved site visits to 10 cities with fabrication facilities, evaluation of 12,300 personal air samples for >60 chemicals, and examination of >37,000 departments and >8600 job codes to develop exposure groupings. Each worker was classified into one of five exposure groups on the basis of job-department combinations: 1) fabrication process equipment operators or process equipment service technicians working in cleanrooms (n = 28,583); 2) professionals such as supervisors working in fabrication areas (n = 8642); 3) professionals and office workers in nonfabrication areas (n = 53,512); 4) back-end workers (n = 5256); or 5) other nonfabrication workers (n = 4088). More than 98% of the personal air samples were below current occupational exposure limits. Although specific chemical exposures at the level of the individual could not be quantified, semiconductor workers were classified into broad exposure groups for assessment of cancer mortality in an epidemiologic study.

Methodologies for processing plant material into acceptable food on a small scale

NASA Technical Reports Server (NTRS)

Parks, Thomas R.; Bindon, John N.; Bowles, Anthony J. G.; Golbitz, Peter; Lampi, Rauno A.; Marquardt, Robert F.

1994-01-01

Based on the Controlled Environment Life Support System (CELSS) production of only four crops, wheat, white potatoes, soybeans, and sweet potatoes; a crew size of twelve; a daily planting/harvesting regimen; and zero-gravity conditions, estimates were made on the quantity of food that would need to be grown to provide adequate nutrition; and the corresponding amount of biomass that would result. Projections were made of the various types of products that could be made from these crops, the unit operations that would be involved, and what menu capability these products could provide. Equipment requirements to perform these unit operations were screened to identify commercially available units capable of operating (or being modified to operate) under CELSS/zero-gravity conditions. Concept designs were developed for those equipment needs for which no suitable units were commercially available. Prototypes of selected concept designs were constructed and tested on a laboratory scale, as were selected commercially available units. This report discusses the practical considerations taken into account in the various design alternatives, some of the many product/process factors that relate to equipment development, and automation alternatives. Recommendations are made on both general and specific areas in which it was felt additional investigation would benefit CELSS missions.

Astronaut Alan Bean flies the Astronaut Maneuvering Equipment

NASA Technical Reports Server (NTRS)

1973-01-01

Astronaut Alan L. Bean, Skylab 3 commander, flies the M509 Astronaut Maneuvering Equipment in the foreward dome area of the Orbital Workshop (OWS) on the space station cluster in Earth orbit. Bean is strapped in to the back-mounted, hand-controlled Automatically Stabilized Maneuvering Unit (ASMU). This ASMU exerperiment is being done in shirt sleeves. The dome area where the experiment is conducted is about 22 feet in diameter and 19 feet from top to bottom.

Astronaut Alan Bean flies the Astronaut Maneuvering Equipment

NASA Technical Reports Server (NTRS)

1973-01-01

Astronaut Alan L. Bean, Skylab 3 commander, flies the M509 Astronaut Maneuvering Equipment in the forward dome area of the Orbital Workshop (OWS) on the space station cluster in Earth orbit. Bean is strapped in to the back-mounted, hand-controlled Automatically Stabilized Maneuvering Unit (ASMU). This ASMU exerperiment is being done in shirt sleeves. The dome area where the experiment is conducted is about 22 feet in diameter and 19 feet from top to bottom.

Low Energy Dissipation Nano Device Research

NASA Astrophysics Data System (ADS)

Yu, Jenny

2015-03-01

The development of research on energy dissipation has been rapid in energy efficient area. Nano-material power FET is operated as an RF power amplifier, the transport is ballistic, noise is limited and power dissipation is minimized. The goal is Green-save energy by developing the Graphene and carbon nantube microwave and high performance devices. Higher performing RF amplifiers can have multiple impacts on broadly field, for example communication equipment, (such as mobile phone and RADAR); higher power density and lower power dissipation will improve spectral efficiency which translates into higher system level bandwidth and capacity for communications equipment. Thus, fundamental studies of power handling capabilities of new RF (nano)technologies can have broad, sweeping impact. Because it is critical to maximizing the power handling ability of grephene and carbon nanotube FET, the initial task focuses on measuring and understanding the mechanism of electrical breakdown. We aim specifically to determine how the breakdown voltage in graphene and nanotubes is related to the source-drain spacing, electrode material and thickness, and substrate, and thus develop reliable statistics on the breakdown mechanism and probability.

Technical standing order : airborne supplemental navigation equipment using the global positioning system (GPS)

DOT National Transportation Integrated Search

2001-01-01

This technical standard order (TSO) prescribes the minimum performance standard that airborne supplemental area navigation equipment using the global positioning system (GPS) must meet in order to be identified with the applicable TSO marking. Airbor...

33 CFR 149.130 - What are the requirements for the cargo transfer system alarm?

Code of Federal Regulations, 2012 CFR

2012-07-01

... EQUIPMENT Pollution Prevention Equipment § 149.130 What are the requirements for the cargo transfer system... in areas of high ambient noise levels where hearing protection is required under § 150.615 of this...

33 CFR 149.130 - What are the requirements for the cargo transfer system alarm?

Code of Federal Regulations, 2013 CFR

2013-07-01

... EQUIPMENT Pollution Prevention Equipment § 149.130 What are the requirements for the cargo transfer system... in areas of high ambient noise levels where hearing protection is required under § 150.615 of this...

33 CFR 149.130 - What are the requirements for the cargo transfer system alarm?

Code of Federal Regulations, 2014 CFR

2014-07-01

... EQUIPMENT Pollution Prevention Equipment § 149.130 What are the requirements for the cargo transfer system... in areas of high ambient noise levels where hearing protection is required under § 150.615 of this...

29 CFR 1926.600 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Motor Vehicles, Mechanized Equipment, and Marine..., adjacent to a highway in normal use, or adjacent to construction areas where work is in progress, shall...

30 CFR 77.701 - Grounding metallic frames, casings, and other enclosures of electric equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Grounding § 77.701 Grounding metallic frames, casings... equipment that can become “alive” through failure of insulation or by contact with energized parts shall be...

76 FR 5068 - Establishment of Low Altitude Area Navigation Routes (T-281, T-283, T-285, T-286, and T-288...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... (IFR) approved Global Positioning System (GPS)/Global Navigation Satellite System (GNSS) equipment... only be available for use by GPS/GNSS equipped aircraft. This action enhances safety and facilitates...

Apollo 15 30-day failure and anomaly listing report

NASA Technical Reports Server (NTRS)

1971-01-01

The significant anomalies that occurred during the Apollo 15 mission are discussed. The five major areas are command and service modules, lunar module, scientific instrument module experiments, Apollo lunar surface experiment package and associated equipment, and government furnished equipment.

New Trends in School Science Equipment.

ERIC Educational Resources Information Center

Lowe, Norman K., Ed.

This four-part volume examines trends, problems, and issues related to school science equipment. Part 1 focuses on laboratory work and practical activities in science and technology education, considering equipment and curriculum development, equipment development related to curricula in Brazil, uses of local resources for practical work,…

Advanced planning surveys using automatic license plate reading equipment and evaluation of automatic license plate reading equipment for advanced planning

DOT National Transportation Integrated Search

1998-05-01

Recent technological advances in computer hardware, software, and image processing have led to the development of automated license plate reading equipment. This equipment has primarily been developed for enforcement and security applications, such a...

[Hand hygiene technique assessment using electronic equipment in 26 Hungarian healthcare institutions].

PubMed

Lehotsky, Ákos; Morvai, Júlia; Szilágyi, László; Bánsághi, Száva; Benkó, Alíz; Haidegger, Tamás

2017-07-01

Hand hygiene is probably the most effective tool of nosocomial infection prevention, however, proper feedback and control is needed to develop the individual hand hygiene practice. Assessing the efficiency of modern education tools, and digital demonstration and verification equipment during their wide-range deployment. 1269 healthcare workers took part in a training organized by our team. The training included the assessment of the participants' hand hygiene technique to identify the most often missed areas. The hand hygiene technique was examined by a digital device. 33% of the participants disinfected their hands incorrectly. The most often missed sites are the fingertips (33% on the left hand, 37% on the right hand) and the thumbs (42% on the left hand, 32% on the right hand). The feedback has a fundamental role in the development of the hand hygiene technique. With the usage of electronic devices feedback can be provided efficiently and simply. Orv Hetil. 2017; 158(29): 1143-1148.

A multidisciplinary decision support system for forest fire crisis management.

PubMed

Keramitsoglou, Iphigenia; Kiranoudis, Chris T; Sarimveis, Haralambos; Sifakis, Nicolaos

2004-02-01

A wildland fire is a serious threat for forest ecosystems in Southern Europe affecting severely and irreversibly regions of significant ecological value as well as human communities. To support decision makers during large-scale forest fire incidents, a multidisciplinary system has been developed that provides rational and quantitative information based on the site-specific circumstances and the possible consequences. The system's architecture consists of several distinct supplementary modules of near real-time satellite monitoring and fire forecast using an integrated framework of satellite Remote Sensing, GIS, and RDBMS technologies equipped with interactive communication capabilities. The system may handle multiple fire ignitions and support decisions regarding dispatching of utilities, equipment, and personnel that would appropriately attack the fire front. The operational system was developed for the region of Penteli Mountain in Attika, Greece, one of the mountain areas in the country most hit by fires. Starting from a real fire incident in August 2000, a scenario is presented to illustrate the effectiveness of the proposed approach.

Review of advanced driver assistance systems (ADAS)

NASA Astrophysics Data System (ADS)

Ziebinski, Adam; Cupek, Rafal; Grzechca, Damian; Chruszczyk, Lukas

2017-11-01

New cars can be equipped with many advanced safety solutions. Airbags, seatbelts and all of the essential passive safety parts are standard equipment. Now cars are often equipped with new advanced active safety systems that can prevent accidents. The functions of the Advanced Driver Assistance Systems are still growing. A review of the most popular available technologies used in ADAS and descriptions of their application areas are discussed in this paper.

Maritime Patrol Innovation: USN PBY Catalina Squadrons in the Pacific Area of Operations, 1941-1945

DTIC Science & Technology

2011-04-15

particularly hazardous due to unpredictable swells and wind. Even the most experienced pilots popped rivets in the hull when landing at sea. Large enough...holes sometimes developed and threatened to sink the aircraft. Flying mechanics regularly used pencils as impromptu rivets ; thus, the navigator’s...need to learn new techniques with new equipment. For instance, consider a future battle-space in which the electromagnetic spectrum is unavailable

Predicting the Productive Capacity of Air Force Aerospace Ground Equipment Personnel Using Aptitude and Experience Measures

DTIC Science & Technology

1993-03-01

Study of the Productive Capacity Project 40 4. 454X1 Job Duty Areas ....... ........................ ......... 41 5. Bases Visited in the Initial Study of...101 21. Correlttion Matrix of the Other Job Performance Measures ................. 102 22 454X1 Tasks...mentioned, the goal of the thesis is to develop an experimental mathematical model for predicting the job performance of enlisted personnel in AFS 454X1

Development of a Distributed, Adaptive, Direction and Control (Civil Preparedness Communications) Network within the State of Rhode Island, Which May Serve as a Prototype Model for the Design of State Area Networks in Other States.

DTIC Science & Technology

1981-03-01

realize that a Civil Defense Communications capabil- ity existed, even in the best equipped communities. Notably, Town Council Presidents, Mayors ...5) B-; (6) AUDIO INPUT. Radios shall be furnished with mating conectors to accomplish , i.e.:(Molex male and female 10 PIN, or similar plugs.) All

Annual report to the NASA Administrator by the Aerospace Safety Advisory Panel on the space shuttle program. Part 2: Summary of information developed in the panel's fact-finding activities

NASA Technical Reports Server (NTRS)

1976-01-01

Safety management areas of concern include the space shuttle main engine, shuttle avionics, orbiter thermal protection system, the external tank program, and the solid rocket booster program. The ground test program and ground support equipment system were reviewed. Systems integration and technical 'conscience' were of major priorities for the investigating teams.

Advanced On-the-Job Training System: System Specification

DTIC Science & Technology

1990-05-01

3.1.5.2.10 Evaluation Subsystem spotfor the Traking Devopment and Deliery Subsystem ..... 22 3.1.5.2.11 TrIning Development=dDelivery Subsystem sL...e. Alsys Ada compiler f. Ethernet Local Area Network reference manual(s) g. Infotron 992 network reference manual(s) h. Computer Program Source...1989 a. Daily check of mainframe components, including all elements critical to support the terminal network . b. Restoration of mainframe equipment

30 CFR 77.1007 - Drilling; general.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Ground... each shift by a competent person. Equipment defects affecting safety shall be reported. (b) Equipment...

LPT. Shield test facility (TAN645) interior. Mechanical equipment room with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LPT. Shield test facility (TAN-645) interior. Mechanical equipment room with switchgear and control boards. Photographer: Jack L. Anderson. Date: February 20, 1959. INEEL negative no. 59-858 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

80. ARAIII. Forming of the mechanical equipment pit in reactor ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

80. ARA-III. Forming of the mechanical equipment pit in reactor building (ARA-608). Camera facing northwest. September 22, 1958. Ineel photo no. 58-4675. Photographer: Jack L. Anderson. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

LPT. Shield test facility (TAN645) interior. Mechanical equipment room with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LPT. Shield test facility (TAN-645) interior. Mechanical equipment room with airwasher and refrigeration compressor. Photographer: Jack L. Anderson. Date: February 20, 1959. INEEL negative no. 59-855 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

ETR COMPRESSOR BUILDING, TRA643. COMPRESSORS AND OTHER EQUIPMENT INSTALLED. METAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR COMPRESSOR BUILDING, TRA-643. COMPRESSORS AND OTHER EQUIPMENT INSTALLED. METAL ROOF AND CONCRETE BLOCK WALLS. INL NEGATIVE NO. 61-4536. Unknown Photographer, ca. 1961. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Kitchen Units for the Classroom.

ERIC Educational Resources Information Center

Illinois Univ., Urbana. Agricultural Experiment Station.

This study is concerned with functional standards for storage of equipment, use of space, and arrangement of work centers in kitchen units for four students within a high school foods laboratory. Lists of equipment and measurements for storage areas are given for each work center. (FS)

14. INTERIOR VIEW TO THE EAST OF EQUIPMENT IN ROOM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR VIEW TO THE EAST OF EQUIPMENT IN ROOM 3, FLOW CONTROL ROOM, BUILDING 3113/3113A. - Nevada Test Site, Test Cell A Facility, Test Cell A Building & Addition, Area 25, Jackass Flats, Road F, Mercury, Nye County, NV

Our Plan for a Wireless Loan Service.

ERIC Educational Resources Information Center

Allmang, Nancy

2003-01-01

Discusses the planning for wireless technology at the research library of the National Institute of Standards and Technology (NIST). Highlights include computer equipment, including laptops and PDAs; local area networks; equipment loan service; writing a business plan; infrastructure; training programs; and future considerations, including…

[Job stress and well-being of care providers: development of a standardized survey instrument].

PubMed

Kivimäki, M; Lindström, K

1992-01-01

The main aim was to develop a standardized survey instrument for measuring job stress and well-being in hospital settings. The actual study group consisted of 349 workers from medical bed wards, first aid unit wards and bed wards for gynecology and obstetrics in a middle-sized hospital in the Helsinki region. Based on the factor analysis of separate questions, the following content areas were chosen for the job stressor scales: haste at work, problems in interpersonal relations at work, problems in occupational collaboration with others, too much responsibility, safety and health risks, lack of appreciation, troublesome patients, and lack of equipment and resources. Content areas for well-being scales and items were general job satisfaction, strain symptoms, perceived mental and physical work load. The reference values of the questionnaire and reliabilities for the scales were calculated. The application and further development of the questionnaire was discussed.

Life Science Research In Space: The Spacelab Era

NASA Astrophysics Data System (ADS)

Farrell, R. M.; Cramer, D. B.; Reid, D. H.

1982-02-01

This manuscript summarizes the events leading to the first Spacelab mission dedicated exclusively to life sciences experimentation. This mission is currently planned for a Space Shuttle flight in the 1984-1985 time frame. Following publication of a NASA Announce ment of Opportunity in 1978, approximately 400 proposals were received from researchers in universities, government laboratories, and industrial firms both in the U. S. and abroad. In 1979, 87 candidate experiments were selected for definition studies to identify the detailed resources which would need to be accommodated by the Spacelab. These proposals addressed problems encountered in man's previous space flight experience, such as space motion sickness, cardiovascular deconditioning, muscle wasting, calcium loss and a reduction in red cell mass. Additionally, experiments were selected in areas of bioengineering, behavior and performance, Plant physiology, and cell biology. Animal species (rodents and small primates) to be investigated will be housed in a specially-developed animal holding facility which will provide all life support requirements for the animals. Human subjects will consist of a Mission Specialist Astronaut and up to four Payload Specialists. Plant species will be housed in Plant Growth Units. A general purpose work station and biological containment facility will provide the working area for much of the in-space experimentation. A comprehensive array of flight qualified laboratory equipment will be made available by NASA to Principal Investigators for in-flight use by the Payload Specialists. This equipment includes microscopes, biotelemetry systems, cameras, centrifuges, refrigerators, and similar equipment. All of this equipment has been designed for use in weightlessness. The process to develop a primary payload of about 20 experiments is now underway for Spacelab mission number four, the first dedicated life sciences flight. Under the overall guidance of NASA Headquarters, responsibility for carrying out this program rests with NASA and contractor scientists, physicians, engineers hind technicians at the Johnson Space Center, Ames Research Center, and the Kennedy Space Center. Spacelab-4 will be the first of a series of dedicated life sciences missions; future dedicated missions are planned at 18-month intervals.

MB-339CD Aircraft Development COTS Integration in a Modern Avionics Architecture

DTIC Science & Technology

2000-10-01

generates analog signals acquired and processed by Key feature of the equipment is that the mass memory the Mission Processor to provide height digital...from remote off-the-shelf equipment. The development of controls to transceivers is completely digital. customised equipment was therefore limited to...interfaces for the electronic Customisation of existing equipment became a possible equipment). solution thanks to the capability of autonomously In order

Prospective areas in the production technology of scientific equipment for space research

NASA Technical Reports Server (NTRS)

Breslavets, A. V.

1974-01-01

The average labor of individual types of operations in the percentage ratio of the total labor consumption of manufacturing scientific instruments and apparatus for space research is presented. The prospective areas in the production technology of billet, machining, mechanical assembly, installation and assembly, adjustment and regulation and testing and control operations are noted. Basic recommendations are made with respect to further reduction of labor consumption and an increase in the productivity of labor when manufacturing scientific equipment for space research.

Astronaut Alan Bean flies the Astronaut Maneuvering Equipment

NASA Image and Video Library

1973-08-27

SL3-107-1215 (27 Aug. 1973) --- Astronaut Alan L. Bean, Skylab 3 commander, flies the M509 Astronaut Maneuvering Equipment in the forward dome area of the Orbital Workshop (OWS) on the space station cluster in Earth orbit. One of his fellow crewmen took this photograph with a 35mm Nikon camera. Bean is strapped into the back mounted, hand-controlled Automatically Stabilized Maneuvering Unit (ASMU). The dome area is about 22 feet in diameter and 19 feet from top to bottom. Photo credit: NASA

Astronaut Alan Bean flies the Astronaut Maneuvering Equipment

NASA Image and Video Library

1973-08-18

SL3-108-1304 (July-September 1973) --- Astronaut Alan L. Bean, Skylab 3 commander, flies the M509 Astronaut Maneuvering Equipment in the forward dome area of the Orbital Workshop (OWS) on the space station cluster in Earth orbit. Bean is strapped in to the back-mounted, hand-controlled Automatically Stabilized Maneuvering Unit (ASMU). This ASMU experiment is being done in shirt sleeves. The dome area where the experiment is conducted is about 22 feet in diameter and 19 feet from top to bottom. Photo credit: NASA

Organophosphate pesticides exposure among farmworkers: pathways and risk of adverse health effects.

PubMed

Suratman, Suratman; Edwards, John William; Babina, Kateryna

2015-01-01

Organophosphate (OP) compounds are the most widely used pesticides with more than 100 OP compounds in use around the world. The high-intensity use of OP pesticides contributes to morbidity and mortality in farmworkers and their families through acute or chronic pesticides-related illnesses. Many factors contributing to adverse health effects have been investigated by researchers to determine pathways of OP-pesticide exposure among farmers in developed and developing countries. Factors like wind/agricultural pesticide drift, mixing and spraying pesticides, use of personal protective equipment (PPE), knowledge, perceptions, washing hands, taking a shower, wearing contaminated clothes, eating, drinking, smoking, and hot weather are common in both groups of countries. Factors including low socioeconomic status areas, workplace conditions, duration of exposure, pesticide safety training, frequency of applying pesticides, spraying against the wind, and reuse of pesticide containers for storage are specific contributors in developing countries, whereas housing conditions, social contextual factors, and mechanical equipment were specific pathways in developed countries. This paper compares existing research in environmental and behavioural exposure modifying factors and biological monitoring between developing and developed countries. The main objective of this review is to explore the current depth of understanding of exposure pathways and factors increasing the risk of exposure potentially leading to adverse health effects specific to each group of countries.

29 CFR 1926.56 - Illumination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and waste areas, accessways, active storage areas, loading platforms, refueling, and field maintenance..., mechanical and electrical equipment rooms, carpenter shops, rigging lofts and active storerooms, barracks or...

24 CFR 85.32 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Equipment. 85.32 Section 85.32 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development... TRIBAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 85.32 Equipment. (a) Title...

Stochastic methods for analysis of power flow in electric networks

NASA Astrophysics Data System (ADS)

1982-09-01

The modeling and effects of probabilistic behavior on steady state power system operation were analyzed. A solution to the steady state network flow equations which adhere both to Kirchoff's Laws and probabilistic laws, using either combinatorial or functional approximation techniques was obtained. The development of sound techniques for producing meaningful data to serve as input is examined. Electric demand modeling, equipment failure analysis, and algorithm development are investigated. Two major development areas are described: a decomposition of stochastic processes which gives stationarity, ergodicity, and even normality; and a powerful surrogate probability approach using proportions of time which allows the calculation of joint events from one dimensional probability spaces.

Development of a Consensus Standard for School Equipment: NSF/NSSEA 380

ERIC Educational Resources Information Center

Breitner, Ashlee

2011-01-01

For many years, the school supplies and equipment industry has investigated methods to ensure product safety and compliance across all its product categories. In early 2010, NSF International and the National School Supply and Equipment Association (NSSEA) came together to develop quality standards for products and equipment designed for use in…

Investigation of a family of power conditioners integrated into a utility grid: final report Category I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, P.; Putkovich, R.P.

1981-07-01

A study was conducted of the requirements for and technologies applicable to power conditioning equipment in residential solar photovoltaic systems. A survey of companies known or thought to manufacture power conditioning equipment was conducted to asses the technology. Technical issues regarding ac and dc interface requirements were studied. A baseline design was selected to be a good example of existing technology which would not need significant development effort for its implementation. Alternative technologies are evaluated to determine which meet the baseline specification, and their costs and losses are evaluated. Areas in which cost improvements can be obtained are studied, andmore » the three best candidate technologies--the current-sourced converter, the HF front end converter, and the programmed wave converter--are compared. It is concluded that the designs investigated will meet, or with slight improvement could meet, short term efficiency goals. Long term efficiency goals could be met if an isolation transformer were not required in the power conditioning equipment. None of the technologies studied can meet cost goals unless further improvements are possible. (LEW)« less

2. Perimeter acquisition radar power plant accessway 101, showing equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Perimeter acquisition radar power plant accessway 101, showing equipment blast lock #102 entrance for fire trucks and equipment. An underground structure at its origin, the 177-foot long accessway is above ground at its south end, terminating in the parking lot of service road B - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Power Plant, In Limited Access Area, Southwest of PARB at end of Service Road B, Nekoma, Cavalier County, ND

An Analysis of the Relationships of Personnel Characteristics to the Performance of DD 963 Class Ships.

DTIC Science & Technology

1983-12-01

problem equipment, supply support deficiencies , maintenance difficulties, etc., which tend to reduce the combat readi- ness of the Navy. CASREPs are...with Operation Reports Publication NVP 7. The severity codes are as follows: C-2 - (Substantially Ready) A deficiency exists in mission essential...equipment which causes a minor degradaticn in any primary mission area. C-3 - (Marginally Ready) a deficiency exists in mission essential equipment which

Total cost of ownership: the role of clinical engineering.

PubMed

Hockel, Dale; Kintner, Michael

2014-06-01

Hospitals often incur substantial hidden costs associated with service agreements that they enter into with original equipment manufacturers at the time of equipment purchase. Hospitals should perform an analysis of the total cost of ownership (TCO) of their organizations' medical equipment to identify opportunities for performance improvement and savings. The findings of the TCO analysis can point to areas where clinical engineering service management can be improved through investments in technology, training, and teamwork.

Thrust Area Report, Engineering Research, Development and Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langland, R. T.

1997-02-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Programmore » has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.« less

Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J.; Russell, O. R.; Martin, K. R. (Principal Investigator)

1973-01-01

The author has identified the following significant results. Mined land reclamation analysis procedures developed within the Indiana portion of the Illinois Coal Basin were independently tested in Ohio utilizing 1:80,000 scale enlargements of ERTS-1 image 1029-15361-7 (dated August 21, 1972). An area in Belmont County was selected for analysis due to the extensive surface mining and the different degrees of reclamation occurring in this area. Contour mining in this area provided the opportunity to extend techniques developed for analysis of relatively flat mining areas in Indiana to areas of rolling topography in Ohio. The analysts had no previous experience in the area. Field investigations largely confirmed office analysis results although in a few areas estimates of vegetation percentages were found to be too high. In one area this error approximated 25%. These results suggest that systematic ERTS-1 analysis in combination with selective field sampling can provide reliable vegetation percentage estimates in excess of 25% accuracy with minimum equipment investment and training. The utility of ERTS-1 for practical and reasonably reliable update of mined lands information for groups with budget limitations is suggested. Many states can benefit from low cost updates using ERTS-1 imagery from public sources.

Sacramento Regional Response Guide to Radiation Emergencies

DTIC Science & Technology

2006-09-01

emergency operations. Additionally, the utilization of thermo luminescence dosimeters ( TLD ) may be beneficial to track long term exposure for...a radiation area. Stakeholder agency emergency response equipment have been issued electronic dosimeters The purpose of the radiation dosimeter is...Incident.............................................................................84 2. Detection/ Dosimeter Equipment

46 CFR 154.1200 - Mechanical ventilation system: General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Mechanical ventilation system: General. 154.1200 Section... Equipment Cargo Area: Mechanical Ventilation System § 154.1200 Mechanical ventilation system: General. (a... cargo handling equipment must have a fixed, exhaust-type mechanical ventilation system. (b) The...

40 CFR 82.156 - Required practices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... appliance to four inches of mercury vacuum. (i)(1) Owners or operators of commercial refrigeration equipment...) Owners or operators of federally-owned commercial refrigeration equipment may have more than 30 days to repair leaks if the refrigeration appliance is located in an area subject to radiological contamination...

40 CFR 82.156 - Required practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... appliance to four inches of mercury vacuum. (i)(1) Owners or operators of commercial refrigeration equipment...) Owners or operators of federally-owned commercial refrigeration equipment may have more than 30 days to repair leaks if the refrigeration appliance is located in an area subject to radiological contamination...

40 CFR 82.156 - Required practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... appliance to four inches of mercury vacuum. (i)(1) Owners or operators of commercial refrigeration equipment...) Owners or operators of federally-owned commercial refrigeration equipment may have more than 30 days to repair leaks if the refrigeration appliance is located in an area subject to radiological contamination...

40 CFR 82.156 - Required practices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... appliance to four inches of mercury vacuum. (i)(1) Owners or operators of commercial refrigeration equipment...) Owners or operators of federally-owned commercial refrigeration equipment may have more than 30 days to repair leaks if the refrigeration appliance is located in an area subject to radiological contamination...

A&M. TAN607. Special equipment services room. Workers are filling viewing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Special equipment services room. Workers are filling viewing window with zinc bromide through tube penetrating concrete shield wall. Date: August 16, 1954. INEEL negative no. 11689 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

40 CFR 65.103 - Equipment identification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... this subpart are identified as a group, and the number of connectors subject is indicated. With respect...) Instrumentation systems. Identify instrumentation systems subject to the provisions of this subpart. Individual... per calendar year. Identify either by list, location (area or group), or other method, equipment in...

40 CFR 65.103 - Equipment identification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this subpart are identified as a group, and the number of connectors subject is indicated. With respect...) Instrumentation systems. Identify instrumentation systems subject to the provisions of this subpart. Individual... per calendar year. Identify either by list, location (area or group), or other method, equipment in...

40 CFR 65.103 - Equipment identification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... this subpart are identified as a group, and the number of connectors subject is indicated. With respect...) Instrumentation systems. Identify instrumentation systems subject to the provisions of this subpart. Individual... per calendar year. Identify either by list, location (area or group), or other method, equipment in...

40 CFR 65.103 - Equipment identification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... this subpart are identified as a group, and the number of connectors subject is indicated. With respect...) Instrumentation systems. Identify instrumentation systems subject to the provisions of this subpart. Individual... per calendar year. Identify either by list, location (area or group), or other method, equipment in...

40 CFR 65.103 - Equipment identification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... this subpart are identified as a group, and the number of connectors subject is indicated. With respect...) Instrumentation systems. Identify instrumentation systems subject to the provisions of this subpart. Individual... per calendar year. Identify either by list, location (area or group), or other method, equipment in...

40 CFR 52.1370 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Montana submitted revisions to the open burning regulation and redesignated the Anaconda area from...) and its Particulate Matter, Fuel Burning Equipment Rule (16.8.1402). (i) Incorporation by reference....8.937) and the Particulate Matter, Fuel Burning Equipment rule (16.8.1402) adopted on January 15...

40 CFR 52.1370 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Montana submitted revisions to the open burning regulation and redesignated the Anaconda area from...) and its Particulate Matter, Fuel Burning Equipment Rule (16.8.1402). (i) Incorporation by reference....8.937) and the Particulate Matter, Fuel Burning Equipment rule (16.8.1402) adopted on January 15...

40 CFR 52.1370 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Montana submitted revisions to the open burning regulation and redesignated the Anaconda area from...) and its Particulate Matter, Fuel Burning Equipment Rule (16.8.1402). (i) Incorporation by reference....8.937) and the Particulate Matter, Fuel Burning Equipment rule (16.8.1402) adopted on January 15...

40 CFR 52.1370 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Montana submitted revisions to the open burning regulation and redesignated the Anaconda area from...) and its Particulate Matter, Fuel Burning Equipment Rule (16.8.1402). (i) Incorporation by reference....8.937) and the Particulate Matter, Fuel Burning Equipment rule (16.8.1402) adopted on January 15...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detilleux, Michel; Centner, Baudouin

The paper describes different methodologies and tools developed in-house by Tractebel Engineering to facilitate the engineering works to be carried out especially in the frame of decommissioning projects. Three examples of tools with their corresponding results are presented: - The LLWAA-DECOM code, a software developed for the radiological characterization of contaminated systems and equipment. The code constitutes a specific module of more general software that was originally developed to characterize radioactive waste streams in order to be able to declare the radiological inventory of critical nuclides, in particular difficult-to-measure radionuclides, to the Authorities. In the case of LLWAA-DECOM, deposited activitiesmore » inside contaminated equipment (piping, tanks, heat exchangers...) and scaling factors between nuclides, at any given time of the decommissioning time schedule, are calculated on the basis of physical characteristics of the systems and of operational parameters of the nuclear power plant. This methodology was applied to assess decommissioning costs of Belgian NPPs, to characterize the primary system of Trino NPP in Italy, to characterize the equipment of miscellaneous circuits of Ignalina NPP and of Kozloduy unit 1 and, to calculate remaining dose rates around equipment in the frame of the preparation of decommissioning activities; - The VISIMODELLER tool, a user friendly CAD interface developed to ease the introduction of lay-out areas in a software named VISIPLAN. VISIPLAN is a 3D dose rate assessment tool for ALARA work planning, developed by the Belgian Nuclear Research Centre SCK.CEN. Both softwares were used for projects such as the steam generators replacements in Belgian NPPs or the preparation of the decommissioning of units 1 and 2 of Kozloduy NPP; - The DBS software, a software developed to manage the different kinds of activities that are part of the general time schedule of a decommissioning project. For each activity, when relevant, algorithms allow to estimate, on the basis of local inputs, radiological exposures of the operators (collective and individual doses), production of primary, secondary and tertiary waste and their characterization, production of conditioned waste, release of effluents,... and enable the calculation and the presentation (histograms) of the global results for all activities together. An example of application in the frame of the Ignalina decommissioning project is given. (authors)« less

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 Mission Specialist Stephen Robinson (left) looks at an area overhead in the Japanese Experiment Module (JEM). In the center is Jennifer Goldsmith, with United Space Alliance at Johnson Space Center, and at right is Louise Kleba, with USA at KSC. Crew members are at KSC becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

NASA Image and Video Library

2004-03-05

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 Mission Specialist Stephen Robinson (left) looks at an area overhead in the Japanese Experiment Module (JEM). In the center is Jennifer Goldsmith, with United Space Alliance at Johnson Space Center, and at right is Louise Kleba, with USA at KSC. Crew members are at KSC becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

Reactor Operations Monitoring System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, M.M.

1989-01-01

The Reactor Operations Monitoring System (ROMS) is a VME based, parallel processor data acquisition and safety action system designed by the Equipment Engineering Section and Reactor Engineering Department of the Savannah River Site. The ROMS will be analyzing over 8 million signal samples per minute. Sixty-eight microprocessors are used in the ROMS in order to achieve a real-time data analysis. The ROMS is composed of multiple computer subsystems. Four redundant computer subsystems monitor 600 temperatures with 2400 thermocouples. Two computer subsystems share the monitoring of 600 reactor coolant flows. Additional computer subsystems are dedicated to monitoring 400 signals from assortedmore » process sensors. Data from these computer subsystems are transferred to two redundant process display computer subsystems which present process information to reactor operators and to reactor control computers. The ROMS is also designed to carry out safety functions based on its analysis of process data. The safety functions include initiating a reactor scram (shutdown), the injection of neutron poison, and the loadshed of selected equipment. A complete development Reactor Operations Monitoring System has been built. It is located in the Program Development Center at the Savannah River Site and is currently being used by the Reactor Engineering Department in software development. The Equipment Engineering Section is designing and fabricating the process interface hardware. Upon proof of hardware and design concept, orders will be placed for the final five systems located in the three reactor areas, the reactor training simulator, and the hardware maintenance center.« less

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

PubMed

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Tracking reliability for space cabin-borne equipment in development by Crow model.

PubMed

Chen, J D; Jiao, S J; Sun, H L

2001-12-01

Objective. To study and track the reliability growth of manned spaceflight cabin-borne equipment in the course of its development. Method. A new technique of reliability growth estimation and prediction, which is composed of the Crow model and test data conversion (TDC) method was used. Result. The estimation and prediction value of the reliability growth conformed to its expectations. Conclusion. The method could dynamically estimate and predict the reliability of the equipment by making full use of various test information in the course of its development. It offered not only a possibility of tracking the equipment reliability growth, but also the reference for quality control in manned spaceflight cabin-borne equipment design and development process.

Recovery Act: Energy Efficiency of Data Networks through Rate Adaptation (EEDNRA) - Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthew Andrews; Spyridon Antonakopoulos; Steve Fortune

2011-07-12

This Concept Definition Study focused on developing a scientific understanding of methods to reduce energy consumption in data networks using rate adaptation. Rate adaptation is a collection of techniques that reduce energy consumption when traffic is light, and only require full energy when traffic is at full provisioned capacity. Rate adaptation is a very promising technique for saving energy: modern data networks are typically operated at average rates well below capacity, but network equipment has not yet been designed to incorporate rate adaptation. The Study concerns packet-switching equipment, routers and switches; such equipment forms the backbone of the modern Internet.more » The focus of the study is on algorithms and protocols that can be implemented in software or firmware to exploit hardware power-control mechanisms. Hardware power-control mechanisms are widely used in the computer industry, and are beginning to be available for networking equipment as well. Network equipment has different performance requirements than computer equipment because of the very fast rate of packet arrival; hence novel power-control algorithms are required for networking. This study resulted in five published papers, one internal report, and two patent applications, documented below. The specific technical accomplishments are the following: • A model for the power consumption of switching equipment used in service-provider telecommunication networks as a function of operating state, and measured power-consumption values for typical current equipment. • An algorithm for use in a router that adapts packet processing rate and hence power consumption to traffic load while maintaining performance guarantees on delay and throughput. • An algorithm that performs network-wide traffic routing with the objective of minimizing energy consumption, assuming that routers have less-than-ideal rate adaptivity. • An estimate of the potential energy savings in service-provider networks using feasibly-implementable rate adaptivity. • A buffer-management algorithm that is designed to reduce the size of router buffers, and hence energy consumed. • A packet-scheduling algorithm designed to minimize packet-processing energy requirements. Additional research is recommended in at least two areas: further exploration of rate-adaptation in network switching equipment, including incorporation of rate-adaptation in actual hardware, allowing experimentation in operational networks; and development of control protocols that allow parts of networks to be shut down while minimizing disruption to traffic flow in the network. The research is an integral part of a large effort within Bell Laboratories, Alcatel-Lucent, aimed at dramatic improvements in the energy efficiency of telecommunication networks. This Study did not explicitly consider any commercialization opportunities.« less

24 CFR 84.34 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Equipment. 84.34 Section 84.34 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development UNIFORM... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 84.34 Equipment. (a) Title to...

Survey of the current state of emergency care in Chennai, India

PubMed Central

Khadpe, Jay; Thangalvadi, Tausif; Rajavelu, Parivalavan; Sinert, Richard

2011-01-01

BACKGROUND: On July 21, 2009, the Medical Council of India officially recognized the specialty of emergency medicine in India. The city of Chennai with over six and a half million people is the fourth largest on the subcontinent and has already been a prominent city of interest in the specialty's development. However, there is no standardization of the resources found in the city's emergency departments. This study was to survey the equipment, training, and certification of Chennai area emergency departments and their staff. METHODS: We conducted a cross-sectional survey of emergency department staff from 38 Chennai area hospitals. The survey instrument contained 44 questions pertaining to hospital demographics, staff training and certification, and ED equipment and supplies. The items on the survey were specifically chosen to represent only the most basic and common resources necessary to practise emergency medicine. RESULTS: The survey found a majority of hospitals are privately operated but there is a wide range in terms of size and volume of patients. A minority of both doctors and nurses are certified in BLS, ACLS, PALS, and ATLS. While almost all departments surveyed had the basic code medications, a number of basic equipment items were lacking from a large percentage of the EDs surveyed. CONCLUSION: The newly established EP community in Chennai will have the responsibility to establish standards for both training and resources so that the specialty may grow and provide a higher standard of emergency care moving into the future. PMID:25215004

Long life, low cost, rechargeable AgZn battery for non-military applications

NASA Astrophysics Data System (ADS)

Brown, Curtis C.

1996-03-01

Of the rechargeable (secondary) battery systems with mature technology, the silver oxide-zinc system (AgZn) safely offers the highest power and energy (watts and watt hours) per unit of volume and mass. As a result they have long been used for aerospace and defense applications where they have also proven their high reliability. In the past, the expense associated with the cost of silver and the resulting low production volume have limited their commercial application. However, the relative low cost of silver now make this system feasible in many applications where high energy and reliability are required. One area of commercial potential is power for a new generation of sophisticated, portable medical equipment. AgZn batteries have recently proven ``enabling technology'' for power critical, advanced medical devices. By extending the cycle calendar life to the system (offers both improved performance and lower operating cost), a combination is achieved which may enable a wide range of future electrical devices. Other areas where AgZn batteries have been used in nonmilitary applications to provide power to aid in the development of commercial equipment have been: (a) Electrically powered vehicles; (b) Remote sensing in nuclear facilities; (c) Special effects equipment for movies; (d) Remote sensing in petroleum pipe lines; (e) Portable computers; (f) Fly by wire systems for commercial aircraft; and (g) Robotics. However none of these applications have progressed to the level where the volume required will significantly lower cost.

A Scoping Literature Review: The State of Knowledge on Home Care Equipment and Supplies.

PubMed

Fraser, Kimberly D; Lai, Jonathan; Nissen, Catherine; Choo, Queenie; Davenport, Jamie; Gutscher, Abram

2015-01-01

We explored the state of knowledge on home care supplies and equipment because not much is known about this topic. We used a scoping review for the literature review because it was the most appropriate approach considering the state of the literature. We searched for articles published in both the gray and peer-reviewed literature. We established five overarching themes based on the findings. These were supply management, durable medical equipment, wound care, best practices, and costs. This review demonstrates that although knowledge about home care supplies and equipment is growing, it is still an understudied area.

A Perceptual Measure of the Degree of Development of Proprietary Equipment.

ERIC Educational Resources Information Center

Cua, Kristy O.; Junttila, Mikko A.; Schroeder, Roger G.

2002-01-01

Evaluated the psychometric properties of a perceptual measure of the extent to which manufacturing organizations develop proprietary equipment, the Proprietary Equipment Scale (developed by the World Class Manufacturing study). Analysis of data from 164 manufacturing plants in 5 countries indicates that although method effects are present, the…

Apollo experience report: Development flight instrumentation. [telemetry equipment for space flight test program

NASA Technical Reports Server (NTRS)

Farmer, N. B.

1974-01-01

Development flight instrumentation was delivered for 25 Apollo vehicles as Government-furnished equipment. The problems and philosophies of an activity that was concerned with supplying telemetry equipment to a space-flight test program are discussed. Equipment delivery dates, system-design details, and flight-performance information for each mission also are included.

KSC-03pd1375

NASA Image and Video Library

2003-04-29

KENNEDY SPACE CENTER, FLA. - Onboard the Liberty Star, the NASA Space Shuttle support ship operated by United Space Alliance, .Dr. Grant Gilmore holds some of the equipment to be used on an undersea expedition. Gilmore is co-principle investigator of the Passive Acoustic Monitoring System (PAMS), part of the equipment. NASA/KSC is participating in the expedition to characterize the condition of the deep-sea coral reefs and reef fish populations in the Oculina Banks, a marine protected area, 20 miles offshore of the east coast of Florida. Scientists on the team will be deploying an underwater robot, a seafloor sampler, and the PAMS, originally developed by NASA to monitor the impact of rocket launches on wildlife refuge lagoons at KSC. The research is sponsored by NOAA Fisheries. The ship departed from Port Canaveral April 29 and will return May 9.

Feasibility Study of Implementing a Mobile Collaborative Information Platform for International Safeguards Inspections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gastelum, Zoe N.; Gitau, Ernest T. N.; Doehle, Joel R.

2014-09-01

In response to the growing pervasiveness of mobile technologies such as tablets and smartphones, the International Atomic Energy Agency and the U.S. Department of Energy National Laboratories have been exploring the potential use of these platforms for international safeguards activities. Specifically of interest are information systems (software, and accompanying servers and architecture) deployed on mobile devices to increase the situational awareness and productivity of an IAEA safeguards inspector in the field, while simultaneously reducing paperwork and pack weight of safeguards equipment. Exploratory development in this area has been met with skepticism regarding the ability to overcome technology deployment challenges formore » IAEA safeguards equipment. This report documents research conducted to identify potential challenges for the deployment of a mobile collaborative information system to the IAEA, and proposes strategies to mitigate those challenges.« less

KSC-03PD-3128

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. Viewed across the turn basin in the Launch Complex 39 Area, the crawler transporter slowly moves the Mobile Launcher Platform (MLP), carrying a set of twin solid rocket boosters, away from the Vehicle Assembly Building (VAB). The journey is in support of engineering analysis vibration tests on the crawler and MLP. The water on the right of the crawlerway is the Banana River. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

Life sciences payload definition and integration study. Volume 2: Requirements, design, and planning studies for the carry-on laboratories. [for Spacelab

NASA Technical Reports Server (NTRS)

1974-01-01

The task phase concerned with the requirements, design, and planning studies for the carry-on laboratory (COL) began with a definition of biomedical research areas and candidate research equipment, and then went on to develop conceptual layouts for COL which were each evaluated in order to arrive at a final conceptual design. Each step in this design/evaluation process concerned itself with man/systems integration research and hardware, and life support and protective systems research and equipment selection. COL integration studies were also conducted and include attention to electrical power and data management requirements, operational considerations, and shuttle/Spacelab interface specifications. A COL program schedule was compiled, and a cost analysis was finalized which takes into account work breakdown, annual funding, and cost reduction guidelines.

Retrofitting a water-pumping station with adjustable speed drives: Feasibility analysis: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-08-01

The objective of this report is to develop a generalized methodology for examining water distribution systems for adjustable speed drive (ASD) applications and to provide an example (the City of Chicago 68th Street Water Pumping Station) using the methodology. The City of Chicago water system was chosen as the candidate for analysis because it has a large service area distribution network with no storage provisions after the distribution pumps. Many industrial motors operate at only one speed or a few speeds. By speeding up or slowing down, ASDs achieve gentle startups and gradual shutdowns thereby providing plant equipment a longermore » life with fewer breakdowns while minimizing the energy requirements. The test program substantiated that ASDs enhance product quality and increase productivity in many industrial operations, including extended equipment life. 35 figs.« less

Airside HVAC BESTEST: HVAC Air-Distribution System Model Test Cases for ASHRAE Standard 140

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, Ronald; Neymark, Joel; Kennedy, Mike D.

This paper summarizes recent work to develop new airside HVAC equipment model analytical verification test cases for ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs. The analytical verification test method allows comparison of simulation results from a wide variety of building energy simulation programs with quasi-analytical solutions, further described below. Standard 140 is widely cited for evaluating software for use with performance-path energy efficiency analysis, in conjunction with well-known energy-efficiency standards including ASHRAE Standard 90.1, the International Energy Conservation Code, and other international standards. Airside HVAC Equipment is a common area ofmore » modelling not previously explicitly tested by Standard 140. Integration of the completed test suite into Standard 140 is in progress.« less

Detection of Entamoeba histolytica by Recombinase Polymerase Amplification.

PubMed

Nair, Gayatri; Rebolledo, Mauricio; White, A Clinton; Crannell, Zachary; Richards-Kortum, R Rebecca; Pinilla, A Elizabeth; Ramírez, Juan David; López, M Consuelo; Castellanos-Gonzalez, Alejandro

2015-09-01

Amebiasis is an important cause of diarrheal disease worldwide and has been associated with childhood malnutrition. Traditional microscopy approaches are neither sensitive nor specific for Entamoeba histolytica. Antigen assays are more specific, but many cases are missed unless tested by molecular methods. Although polymerase chain reaction (PCR) is effective, the need for sophisticated, expensive equipment, infrastructure, and trained personnel limits its usefulness, especially in the resource-limited, endemic areas. Here, we report development of a recombinase polymerase amplification (RPA) method to detect E. histolytica specifically. Using visual detection by lateral flow (LF), the test was highly sensitive and specific and could be performed without additional equipment. The availability of this inexpensive, sensitive, and field-applicable diagnostic test could facilitate rapid diagnosis and treatment of amebiasis in endemic regions. © The American Society of Tropical Medicine and Hygiene.

Power requirements for commercial communications spacecraft

NASA Technical Reports Server (NTRS)

Billerbeck, W. J.

1985-01-01

Historical data on commercial spacecraft power systems are presented and their power requirements to the growth of satellite communications channel usage are related. Some approaches for estimating future power requirements of this class of spacecraft through the year 2000 are proposed. The key technology drivers in satellite power systems are addressed. Several technological trends in such systems are described, focusing on the most useful areas for research and development of major subsystems, including solar arrays, energy storage, and power electronics equipment.

Analysis and evalaution in the production process and equipment area of the low-cost solar array project. [including modifying gaseous diffusion and using ion implantation

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1979-01-01

The manufacturing methods for photovoltaic solar energy utilization are assessed. Economic and technical data on the current front junction formation processes of gaseous diffusion and ion implantation are presented. Future proposals, including modifying gaseous diffusion and using ion implantation, to decrease the cost of junction formation are studied. Technology developments in current processes and an economic evaluation of the processes are included.

Systems Study of an Automated Fire Weather Data System

NASA Technical Reports Server (NTRS)

Nishioka, K.

1974-01-01

A sensor system applicable to an automated weather station was developed. The sensor provides automated fire weather data which correlates with manual readings. The equipment and methods are applied as an aid to the surveillance and protection of wildlands from fire damage. The continuous readings provided by the sensor system make it possible to determine the periods of time that the wilderness areas should be closed to the public to minimize the possibilities of fire.

"It's Quite Liberating Turning up to a Classroom without a Pile of Papers and Equipment." Pedagogic Bungee Jumping: A Strategy to Rethink Teaching in a Technology-Rich Age?

ERIC Educational Resources Information Center

Hughes, Julie

2012-01-01

Initial Teacher Education (ITE) for the post-compulsory sector (PCE) in the UK is currently under review. Despite earlier plans to substantially increase the use of technology in ITE the Lifelong Learning UK (LLUK) consultation findings recommend that "we will expect that teachers do develop their skills in this area to a limited extent on a…

A (13)C NMR analysis of the effects of electron radiation on graphite/polyetherimide composites

NASA Technical Reports Server (NTRS)

Ferguson, Milton W.

1989-01-01

Initial investigations have been made into the use of high resolution nuclear magnetic resonance (NMR) for the characterization of radiation effects in graphite and Kevlar fibers, polymers, and the fiber/matrix interface in graphite/polyetherimide composites. Sample preparation techniques were refined. Essential equipment has been procured. A new NMR probe was constructed to increase the proton signal-to-noise ratio. Problem areas have been identified and plans developed to resolve them.

Analysis and Application of Quality Economics Based on Input-Output

NASA Astrophysics Data System (ADS)

Lu, Qiang; Li, Xin

2018-01-01

Quality economics analysis is an important research area in the current economic frontier, which has a huge role in promoting the quality-benefit type road development in China. Through the study of quality economics analysis and application, economics of quality and quality economics management are summarized, and theoretical framework of quality economics analysis is constructed. Finally, the quality economics analysis of aerospace equipment is taken as an example to carry on the application research.

Using a Cold Radiometer to Measure Heat Loads and Survey Heat Leaks

NASA Technical Reports Server (NTRS)

Dipirro, M.; Tuttle, J.; Hait, T.; Shirron, P.

2014-01-01

We have developed an inexpensive cold radiometer for use in thermal/vacuum chambers to measure heat loads, characterize emissivity and specularity of surfaces and to survey areas to evaluate stray heat loads. We report here the results of two such tests for the James Webb Space Telescope to measure heat loads and effective emissivities of 2 major pieces of optical ground support equipment that will be used in upcoming thermal vacuum testing of the Telescope.

Using a Cold Radiometer to Measure Heat Loads and Survey Heat Leaks

NASA Technical Reports Server (NTRS)

DiPirro, M.; Tuttle, J.; Hait, T.; Shirron, P.

2013-01-01

We have developed an inexpensive cold radiometer for use in thermal/vacuum chambers to measure heat loads, characterize emissivity and specularity of surfaces and to survey areas to evaluate stray heat loads. We report here the results of two such tests for the James Webb Space Telescope to measure heat loads and effective emissivities of2 major pieces of optical ground support equipment that will be used in upcoming thermal vacuum testing of the Telescope.

Develop Measures of Effectiveness and Deployment Optimization Rules for Networked Ground Micro-Sensors

DTIC Science & Technology

2001-05-01

types and total #) Ø Control of Sensors ( Scheduling ) Ø Coverage (Time & Area) Uncontrollable Inputs ØWeather Ø Atmospheric Effects Ø Equipment...are widely scattered and used to cue or wakeup other higher-level sensors. Trip line sensors consist of some combination of acoustic, seismic and...Employ a mix if different sensor types in order to increase detection probability 4.4.4.2 Minimize Battery Power • Set schedule turn on and off

33 CFR 106.305 - Facility Security Assessment (FSA) requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... available to maintain essential services; (vi) The essential maintenance equipment and storage areas; (vii... procedures relating to essential services; (v) Measures to protect radio and telecommunication equipment... property, or economic disruption, of an attack on or at the OCS facility; and (7) Locations where access...

77 FR 71607 - Mobile Offshore Drilling Unit (MODU) Electrical Equipment Certification Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-03

... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-0839] Mobile Offshore Drilling... hazardous areas on foreign-flagged Mobile Offshore Drilling Units (MODUs) that have never operated, but... International Maritime Organization (IMO) Code for the Construction and Equipment of Mobile Offshore Drilling...

David A. Sievers | NREL

Science.gov Websites

fermentation and refining process. One of his favorite topics is in the design and commissioning of custom research equipment. His areas of expertise include: Project management Process design, equipment design , and fabrication Instrumentation and controls design and programming Data analysis and presentation

78 FR 36538 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... training equipment, U.S. Government and contractor engineering, technical and logistics support services... equipment, U.S. Government and contractor engineering, technical and logistics support services, and other... central government and the country's outlying areas. The sale of these C-130Js to Libya will significantly...

A Guide for Equipping Industrial Arts Facilities.

ERIC Educational Resources Information Center

American Industrial Arts Association, Washington, DC. Equipment Guide Committee.

A guide for planning new and revising existing industrial arts facilities which gives a listing of tools and equipment recommended for each of the major areas of instruction (automotive and power mechanics, ceramics, drafting, electronics, elementary, general shop, graphic arts, metalworking, plastics, and woodworking). General descriptions and…

29 CFR 1926.250 - General requirements for storage.

Code of Federal Regulations, 2010 CFR

2010-07-01

... in tiers shall be stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling or collapse. (2) Maximum safe load limits of floors within buildings and structures, in pounds per..., tanks, and similar storage areas shall be equipped with personal fall arrest equipment meeting the...

40 CFR 721.63 - Protection in the workplace.

Code of Federal Regulations, 2010 CFR

2010-07-01

... wear, personal protective equipment that provides a barrier to prevent dermal exposure to the substance in the specific work area where it is selected for use. Each such item of personal protective... other personal protective equipment selected in paragraph (a)(1) of this section, the following items...

46 CFR 28.880 - Hydraulic equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... hydraulic equipment and the adjacent work area. Protection shall be afforded to the operator of hydraulic... personnel. (h) Nonmetallic flexible hose assemblies must only be used between two points of relative motion... (method). (j) Nonmetallic flexible hose shall be marked with the manufacturer's name or trademark, type or...

4-H Club Goat Guide.

ERIC Educational Resources Information Center

Brown, R. Kipp

This guide provides information for 4-H Club members who have decided on a club goat project. Topics include general information in the following areas: show rules; facilities and equipment (barns/sheds, fences, feeders, water containers, and equipment); selection (structural correctness, muscle, volume and capacity, style and balance, and growth…

IET control building (TAN620). equipment removed. Lube oil and waste ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

IET control building (TAN-620). equipment removed. Lube oil and waste piping at upper right. Fire door on right. Rebar exposed in concrete of ceiling. INEEL negative no. HD-21-5-3 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Contour Mapping

NASA Technical Reports Server (NTRS)

1995-01-01

In the early 1990s, the Ohio State University Center for Mapping, a NASA Center for the Commercial Development of Space (CCDS), developed a system for mobile mapping called the GPSVan. While driving, the users can map an area from the sophisticated mapping van equipped with satellite signal receivers, video cameras and computer systems for collecting and storing mapping data. George J. Igel and Company and the Ohio State University Center for Mapping advanced the technology for use in determining the contours of a construction site. The new system reduces the time required for mapping and staking, and can monitor the amount of soil moved.

Terrestrial EVA Suit = Fire Fighter's Protective Clothing

NASA Technical Reports Server (NTRS)

Foley, Tico; Brown, Robert G.; Burrell, Eddie; DelRosso, Dominic; Krishen, Kumar; Moffitt, Harold; Orndoff, Evelyne; Santos, Beatrice; Butzer, Melissa; Dasgupta, Rajib

1999-01-01

Firefighters want to go to work, do their job well, and go home alive and uninjured. For their most important job, saving lives, firefighters want protective equipment that will allow more extended and effective time at fire scenes in order to perform victim search and rescue. A team, including engineers at NASA JSC and firefighters from Houston, has developed a list of problem areas for which NASA technology and know-how can recommend improvements for firefighter suits and gear. Prototypes for solutions have been developed and are being evaluated. This effort will spin back to NASA as improvements for lunar and planetary suits.

A focal plane metrology system and PSF centroiding experiment

NASA Astrophysics Data System (ADS)

Li, Haitao; Li, Baoquan; Cao, Yang; Li, Ligang

2016-10-01

In this paper, we present an overview of a detector array equipment metrology testbed and a micro-pixel centroiding experiment currently under development at the National Space Science Center, Chinese Academy of Sciences. We discuss on-going development efforts aimed at calibrating the intra-/inter-pixel quantum efficiency and pixel positions for scientific grade CMOS detector, and review significant progress in achieving higher precision differential centroiding for pseudo star images in large area back-illuminated CMOS detector. Without calibration of pixel positions and intrapixel response, we have demonstrated that the standard deviation of differential centroiding is below 2.0e-3 pixels.

The design of digital-adaptive controllers for VTOL aircraft

NASA Technical Reports Server (NTRS)

Stengel, R. F.; Broussard, J. R.; Berry, P. W.

1976-01-01

Design procedures for VTOL automatic control systems have been developed and are presented. Using linear-optimal estimation and control techniques as a starting point, digital-adaptive control laws have been designed for the VALT Research Aircraft, a tandem-rotor helicopter which is equipped for fully automatic flight in terminal area operations. These control laws are designed to interface with velocity-command and attitude-command guidance logic, which could be used in short-haul VTOL operations. Developments reported here include new algorithms for designing non-zero-set-point digital regulators, design procedures for rate-limited systems, and algorithms for dynamic control trim setting.

The effects of roadway characteristics on farm equipment crashes: A GIS approach

NASA Astrophysics Data System (ADS)

Greenan, Mitchell Joseph

Tractors and other self-propelled farm equipment, such as combines, sprayers, and towed grain carts, are often used on public roadways as the primary means for traveling from homestead to homestead or from homestead to a distributer. Increased roadway exposure has led to a growing concern for crashes involving farm equipment on the public roadway. A handful of studies exist examining public roadway crashes involving farm equipment using crash data, but none thus far have evaluated road segment data to identify road-specific risk factors. The objective of this study is to identify if roadway characteristics (traffic density, speed limit, road type, surface type, road width, and shoulder width) affect the risk of a crash involving farm equipment on Iowa public roadways. A retrospective cohort study of Iowa roads was conducted to identify the types of roads that are at an increased risk of having a farm-equipment crash on them. Crash data from the Iowa Department of Transportation (to identify crashes) were spatial linked to Iowa roadway data using Geographic Information Systems (GIS). Logistic regression was used to calculate ORs and 95% CL. Out of 319,705 road segments in Iowa, 0.4% segments (n=1,337) had a farm equipment crash from 2005-2011. The odds of having a farm equipment crash were significantly higher for road segments with increased traffic density and speed limit. Roads with an average daily traffic volume of at least 1,251 vehicles were at a 5.53 times greater odds of having a crash than roads with a daily traffic volume between 0-30 vehicles. (CI: 3.90-7.83). Roads with a posted speed limit between 50mph and 60mph were at a 4.88 times greater odds of having a crash than roads with a posted speed limit of 30mph or less. (CI: 3.85-6.20). Specific roadway characteristics such as roadway and shoulder width were also associated with the risk of a crash. For every 5 foot increase in road width, the odds for a crash decreased by 6 percent (CI: 0.89-0.99) and for every 5 foot increase in shoulder width, the odds of a crash decreased by 8 percent. (CI: 0.86-0.98). Although not statically significant, unpaved roads increased the odds of a crash by 17 percent. (CI: 0.91-1.50) Lastly, it was found that Farm to Market routes increased the odds of a crash by two fold compared to local roads (which make up roughly 67 percent of Iowa public roads). (CI: 1.72-2.43) When the same model was stratified by rurality (urban/rural), it was found that high traffic density leads to a higher risk of a crash in rural areas. Iowa routes and Farm to Market routes had a greater odds of a crash in urban than rural areas, and road and shoulder width were more protective in rural than urban areas. When only using roads with a crash involving an injury versus all other roads as the outcome, Iowa routes and roads with increased speed limits had higher odds for an injury-involved crash, while increased road width were more protective against crashes involving injuries. Findings from the study suggest that several roadway characteristics were associated with farm-equipment crashes. Through administrative and engineering controls, the six static explanatory variables used in this study may be modified to decrease the risk of a farm equipment crash. Speed limit can be modified through administrative controls while traffic density, road and shoulder width, road type, and surface type can be modified through engineering controls. Results from this study provide information that will aid policy-makers in developing safer roads for farm equipment.

29 CFR 1918.92 - Illumination.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Walking, working, and climbing areas. Walking, working, and climbing areas shall be illuminated. Unless... contact with drafts, running gear, and other moving equipment. (4) Portable cargo lights furnished by the...

Integrating human factors knowledge into certification: The point of view of the Internatioanal Civil Aviation Organization (ICAO)

NASA Technical Reports Server (NTRS)

Maurino, Daniel; Galotti, Vincent

1994-01-01

It is appropriate here to repeat the analogy described in the introduction to this paper which is that: The consideration of human factors requirements during the design stage of advanced, new technology systems may be seen as resting over a three-legged stool. The first leg, the equipment that a system will utilize to achieve its goals, has traditionally attracted ergonomic considerations associated with equipment design, usually centered around 'knobs and dials.' Lately, this view has expanded to include the so-called other important aspect of Human Factor's study which deals with the cognitive, behaviorial and social processes of the human operators. Study in this area must be furthered. The second leg of the stool, the procedures to operate the equipment, however, has been largely unaddressed. Procedures are not inherent to equipment, but must be developed. The importance of proper human factors consideration in the design of procedures can not be overstated. Lastly, the third leg of the stool, the certification of personnel who will operate the equipment, is very much underway, but far from being complete. The real quest now, however, is to integrate these three legs into an indivisible one. Finally, and most importantly, this workshop and its topic are extremely timely in that we are at the dawn of the most ambitious development ever undertaken in international civil aviation. This would allow us the rather unique opportunity to put theory into practice in the near future by ensuring that the concepts developed and furthered by this workshop and the follow-up are implemented in the design and certification of the ICAO future CNS/ATM systems described earlier in this paper. Now is the time to incorporate human factors requirements during the certification processes of these systems. This might act as a test to the feasibility of these ideas. Such endeavors represent a challenge for the research, engineering, training, operational and regulatory communities. But there is certainly more to be gained by attempting to meet the challenge rather than refraining from progress by decrying the difficulties involved.

Nanostructure-mediated drug delivery.

PubMed

Hughes, Gareth A

2005-03-01

Nanotechnology is expected to have an impact on all industries including semiconductors, manufacturing, and biotechnology. Tools that provide the capability to characterize and manipulate materials at the nanoscale level further elucidate nanoscale phenomena and equip researchers and developers with the ability to fabricate novel materials and structures. One of the most promising societal impacts of nanotechnology is in the area of nanomedicine. Personalized health care, rational drug design, and targeted drug delivery are some of the benefits of a nanomedicine-based approach to therapy. This review will focus on the development of nanoscale drug delivery mechanisms. Nanostructured drug carriers allow for the delivery of not only small-molecule drugs but also the delivery of nucleic acids and proteins. Delivery of these molecules to specific areas within the body can be achieved, which will reduce systemic side effects and allow for more efficient use of the drug.

Supplies and equipment for pediatric emergency mass critical care.

PubMed

Bohn, Desmond; Kanter, Robert K; Burns, Jeffrey; Barfield, Wanda D; Kissoon, Niranjan

2011-11-01

Epidemics of acute respiratory disease, such as severe acute respiratory syndrome in 2003, and natural disasters, such as Hurricane Katrina in 2005, have prompted planning in hospitals that offer adult critical care to increase their capacity and equipment inventory for responding to a major demand surge. However, planning at a national, state, or local level to address the particular medical resource needs of children for mass critical care has yet to occur in any coordinated way. This paper presents the consensus opinion of the Task Force regarding supplies and equipment that would be required during a pediatric mass critical care crisis. In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations.Steering Committee members established subcommittees by topic area and performed literature reviews of MEDLINE and Ovid databases. The Steering Committee produced draft outlines through consensus-based study of the literature and convened October 6-7, 2009, in New York, NY, to review and revise each outline. Eight draft documents were subsequently developed from the revised outlines as well as through searches of MEDLINE updated through March 2010.The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29-30, 2010. Feedback on each manuscript was compiled and the Steering Committee revised each document to reflect expert input in addition to the most current medical literature. The Task Force endorsed the view that supplies and equipment must be available for a tripling of capacity above the usual peak pediatric intensive care unit capacity for at least 10 days. The recommended size-specific pediatric mass critical care equipment stockpile for two types of patients is presented in terms of equipment needs per ten mass critical care beds, which would serve 26 patients over a 10-day period. Specific recommendations are made regarding ventilator capacity, including the potential use of high-frequency oscillatory ventilation and extracorporeal membrane oxygenation. Other recommendations include inventories for disposable medical equipment, medications, and staffing levels.

Supplies and equipment for pediatric emergency mass critical care

PubMed Central

Bohn, Desmond; Kanter, Robert K.; Burns, Jeffrey; Barfield, Wanda D.; Kissoon, Niranjan

2015-01-01

Introduction Epidemics of acute respiratory disease, such as severe acute respiratory syndrome in 2003, and natural disasters, such as Hurricane Katrina in 2005, have prompted planning in hospitals that offer adult critical care to increase their capacity and equipment inventory for responding to a major demand surge. However, planning at a national, state, or local level to address the particular medical resource needs of children for mass critical care has yet to occur in any coordinated way. This paper presents the consensus opinion of the Task Force regarding supplies and equipment that would be required during a pediatric mass critical care crisis. Methods In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations. Steering Committee members established subcommittees by topic area and performed literature reviews of MEDLINE and Ovid databases. The Steering Committee produced draft outlines through consensus-based study of the literature and convened October 6 –7, 2009, in New York, NY, to review and revise each outline. Eight draft documents were subsequently developed from the revised outlines as well as through searches of MEDLINE updated through March 2010. The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29 –30, 2010. Feedback on each manuscript was compiled and the Steering Committee revised each document to reflect expert input in addition to the most current medical literature. Task Force Recommendations The Task Force endorsed the view that supplies and equipment must be available for a tripling of capacity above the usual peak pediatric intensive care unit capacity for at least 10 days. The recommended size-specific pediatric mass critical care equipment stockpile for two types of patients is presented in terms of equipment needs per ten mass critical care beds, which would serve 26 patients over a 10-day period. Specific recommendations are made regarding ventilator capacity, including the potential use of high-frequency oscillatory ventilation and extracorporeal membrane oxygenation. Other recommendations include inventories for disposable medical equipment, medications, and staffing levels. PMID:22067920

Effectiveness of medical equipment donations to improve health systems: how much medical equipment is broken in the developing world?

PubMed

Perry, Lora; Malkin, Robert

2011-07-01

It is often said that most of the medical equipment in the developing world is broken with estimates ranging up to 96% out of service. But there is little documented evidence to support these statements. We wanted to quantify the amount of medical equipment that was out of service in resource poor health settings and identify possible causes. Inventory reports were analyzed from 1986 to 2010, from hospitals in sixteen countries across four continents. The UN Human Development Index was used to determine which countries should be considered developing nations. Non-medical hospital equipment was excluded. This study examined 112,040 pieces of equipment. An average of 38.3% (42,925, range across countries: 0.83-47%) in developing countries was out of service. The three main causes were lack of training, health technology management, and infrastructure. We hope that the findings will help biomedical engineers with their efforts toward effective designs for the developing world and NGO's with efforts to design effective healthcare interventions.

30 CFR 77.508 - Lightning arresters, ungrounded and exposed power conductors and telephone wires.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Lightning arresters, ungrounded and exposed... AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Electrical Equipment-General § 77.508 Lightning... conductors and telephone wires shall be equipped with suitable lightning arresters which are adequately...

30 CFR 77.508 - Lightning arresters, ungrounded and exposed power conductors and telephone wires.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Lightning arresters, ungrounded and exposed... AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Electrical Equipment-General § 77.508 Lightning... conductors and telephone wires shall be equipped with suitable lightning arresters which are adequately...

30 CFR 77.508 - Lightning arresters, ungrounded and exposed power conductors and telephone wires.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Lightning arresters, ungrounded and exposed... AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Electrical Equipment-General § 77.508 Lightning... conductors and telephone wires shall be equipped with suitable lightning arresters which are adequately...

A Guide to Selecting Learning Resource Materials and Equipment.

ERIC Educational Resources Information Center

Dequin, Henry C.

The process is discussed and helpful publications are reviewed for the selection of materials in three areas--learning resource materials for library media programs, materials for special education, and equipment. In the first section, such factors as the need for suitable materials, the abundance of materials available, and financial limitations…

LPT. Low power test (TAN641) interior of mechanical equipment room. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LPT. Low power test (TAN-641) interior of mechanical equipment room. Air compressors in left foreground. Evaporate condenser in right background. Construction 93% complete. Photographer: Jack L. Anderson. Date: October 23, 1957. INEEL negative no. 57-5340 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

87. ARAIII. GCRE reactor building (ARA608) Mechanical equipment room. Utility ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

87. ARA-III. GCRE reactor building (ARA-608) Mechanical equipment room. Utility air receiver, dryer, and compressor sit on their foundations prior to grouting. December 22, 1958. Ineel photo no. 58-6429. Photographer: Ken Mansfield. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

33 CFR 104.270 - Security measures for restricted areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... surveillance equipment and systems and their controls and lighting system controls; (3) Ventilation and air-conditioning systems and other similar spaces; (4) Spaces with access to potable water tanks, pumps, or... security and surveillance equipment and systems; and (6) Protect cargo and vessel stores from tampering. (b...

40 CFR 63.1003 - Equipment identification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... a group, and the number of connectors subject is indicated. (2) Routed to a process or fuel gas... of this subpart. Individual components in an instrumentation system need not be identified. (5) Equipment in service less than 300 hours per calendar year. The identity, either by list, location (area or...

40 CFR 63.1003 - Equipment identification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... a group, and the number of connectors subject is indicated. (2) Routed to a process or fuel gas... of this subpart. Individual components in an instrumentation system need not be identified. (5) Equipment in service less than 300 hours per calendar year. The identity, either by list, location (area or...

40 CFR 63.1003 - Equipment identification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... a group, and the number of connectors subject is indicated. (2) Routed to a process or fuel gas... of this subpart. Individual components in an instrumentation system need not be identified. (5) Equipment in service less than 300 hours per calendar year. The identity, either by list, location (area or...

40 CFR 63.1003 - Equipment identification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... a group, and the number of connectors subject is indicated. (2) Routed to a process or fuel gas... of this subpart. Individual components in an instrumentation system need not be identified. (5) Equipment in service less than 300 hours per calendar year. The identity, either by list, location (area or...

46 CFR 183.530 - Hazardous areas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... equipment in spaces containing machinery powered by, or fuel tanks for, gasoline or other fuels having a... intrinsically safe system. (b) Electrical equipment in lockers used to store paint, oil, turpentine, or other flammable liquids must be explosion-proof or be part of an intrinsically safe system. (c) Explosion-proof...

IET. Control and equipment building (TAN620) sections. Depth and profile ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

IET. Control and equipment building (TAN-620) sections. Depth and profile of earthen shield tunnels. Ralph M. Parsons 902-4-ANP-620-A-321. Date: February 1954. INEEL index code no. 035-0620-00-693-106906 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

10 CFR 20.1704 - Further restrictions on the use of respiratory protection equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Further restrictions on the use of respiratory protection... RADIATION Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1704 Further restrictions on the use of respiratory protection equipment. The Commission may impose...

10 CFR 20.1704 - Further restrictions on the use of respiratory protection equipment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Further restrictions on the use of respiratory protection... RADIATION Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1704 Further restrictions on the use of respiratory protection equipment. The Commission may impose...

10 CFR 20.1704 - Further restrictions on the use of respiratory protection equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Further restrictions on the use of respiratory protection... RADIATION Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1704 Further restrictions on the use of respiratory protection equipment. The Commission may impose...

10 CFR 20.1704 - Further restrictions on the use of respiratory protection equipment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Further restrictions on the use of respiratory protection... RADIATION Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1704 Further restrictions on the use of respiratory protection equipment. The Commission may impose...

10 CFR 20.1704 - Further restrictions on the use of respiratory protection equipment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Further restrictions on the use of respiratory protection... RADIATION Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas § 20.1704 Further restrictions on the use of respiratory protection equipment. The Commission may impose...