Technical aspects of telepathology with emphasis on future development.

PubMed

Schwarzmann, P; Binder, B; Klose, R

2000-01-01

Pathology undergoes presently changes due to new developments in diagnostic opportunities and cost saving efforts in health care. Out of the wide field of telepathology the paper selects three prototype applications: telepathology in teleeducation, expert advice for preselected details of a slide and finally telepathology for remote diagnosis. The most challenging field for remote diagnosis is the application in the frozen section scenario. The paper starts with the mental experiment to map conventional procedures to counterparts in telepathology. Technical opportunities and economical restrictions of telepathology equipment are discussed with respect to the components: electronic camera, display devices, haptic sensors and displays, available telecommunication channels and telepathology software. As an example and for illustration of the state of the art for an advanced telemicroscopy system able to perform remote frozen section diagnosis, the HISTKOM equipment is presented in more details. The section concerning future developments regards the aspects of the acceptance by tentative users, legal aspects, costs and affordability of equipment, the market for equipment components and the adequate telecommunication services. Further is regarded the mutual influence of properties of existing systems and application experiences gained with them on the next generation of equipment and application software. Conclusions and references close the paper.

Evaluation of human exposure to complex waveform magnetic fields generated by arc-welding equipment according to European safety standards.

PubMed

Zoppetti, Nicola; Bogi, Andrea; Pinto, Iole; Andreuccetti, Daniele

2015-02-01

In this paper, a procedure is described for the assessment of human exposure to magnetic fields with complex waveforms generated by arc-welding equipment. The work moves from the analysis of relevant guidelines and technical standards, underlining their strengths and their limits. Then, the procedure is described with particular attention to the techniques used to treat complex waveform fields. Finally, the procedure is applied to concrete cases encountered in the workplace. The discussion of the results highlights the critical points in the procedure, as well as those related to the evolution of the technical and exposure standards. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Environmental Support Specialist, Blocks VI & VII, 17-7. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This military-developed text contains the final section of a four-part course to train environmental support specialists. Covered in the individual course blocks are maintenance of water and waste processing system components (external corrosion control, cathodic protection, drive equipment, pipelines and valves, meters and recorders, chemical…

Solar Energy Installers Curriculum Guide. Final Report, September 18, 1980-August 15, 1981.

ERIC Educational Resources Information Center

Seaman, George B., Sr.

This publication is a curriculum guide for the installation of solar equipment. It is divided into the three major areas of general knowledge, technical design, and installation/maintenance. Associated is a list of relevant and prerequisite competencies identified as appropriate toward student interest groups of technician, installer,…

[Business and Education Standards Program - Development of Standards and Certification for Welders]. Final Report.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

The American Welding Society (AWS) Education Grant Committee was organized in 1993 to unite employers, trade unions, educators, technical specialists, welding equipment manufacturers, and AWS members in efforts to develop national skills standards for training and certifying entry-level, advanced, and expert welders. Data were collected through…

Hazardous Waste Treatment, Storage, and Disposal Facilities-Organic Air Emission Standards for Process Vents and Equipment Leaks - Technical Amendment - Federal Register Notice, April 26, 1991

EPA Pesticide Factsheets

This document corrects typographical errors in the regulatory text of the final standards that would limit organic air emissions as a class at hazardous waste treatment, storage, and disposal facilities (TSDF) that are subject to regulation under subtitle

76 FR 72902 - Materials Processing Equipment Technical Advisory Committee;

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical... questions that affect the level of export controls applicable to materials processing equipment and related...

Preliminary assessment of aerial photography techniques for canvasback population analysis

USGS Publications Warehouse

Munro, R.E.; Trauger, D.L.

1976-01-01

Recent intensive research on the canvasback has focused attention on the need for more precise estimates of population parameters. During the 1972-75 period, various types of aerial photographing equipment were evaluated to determine the problems and potentials for employing these techniques in appraisals of canvasback populations. The equipment and procedures available for automated analysis of aerial photographic imagery were also investigated. Serious technical problems remain to be resolved, but some promising results were obtained. Final conclusions about the feasibility of operational implementation await a more rigorous analysis of the data collected.

Design of reinforcement welding machine within steel framework for marine engineering

NASA Astrophysics Data System (ADS)

Wang, Gang; Wu, Jin

2017-04-01

In this project, a design scheme that reinforcement welding machine is added within the steel framework is proposed according to the double-side welding technology for box-beam structure in marine engineering. Then the design and development of circuit and transmission mechanism for new welding equipment are completed as well with one sample machine being made. Moreover, the trial running is finished finally. Main technical parameters of the equipment are: the working stroke: ≥1500mm, the welding speed: 8˜15cm/min and the welding sheet thickness: ≥20mm.

75 FR 47546 - Materials Processing Equipment; Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment; Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

75 FR 66356 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-28

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

78 FR 13625 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

77 FR 65857 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

76 FR 20949 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

77 FR 42483 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-19

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

78 FR 24160 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

77 FR 25960 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

78 FR 42754 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

76 FR 42678 - Materials Processing Equipment; Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment; Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

78 FR 63161 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...

Technical Directions In High Resolution Non-Impact Printers

NASA Astrophysics Data System (ADS)

Dunn, S. Thomas; Dunn, Patrice M.

1987-04-01

There are several factors to consider when addressing the issue of non-impact printer resolution. One will find differences between the imaging resolution and the final output resolution, and most assuradly differences exist between the advertised and actual resolution of many of these systems. Beyond that some of the technical factors that effect the resolution of a system in-clude: . Scan Line Density . Overlap . Spot Size . Energy Profile . Symmetry of Imaging Generally speaking, the user of graphic arts equipment, is best advised to view output to determine the degree of acceptable quality.

Cost Study of Educational Media Systems and Their Equipment Components. Volume II, Technical Report. Final Report.

ERIC Educational Resources Information Center

General Learning Corp., Washington, DC.

A common instructional task and a set of educational environments are hypothesized for analysis of media cost data. The analytic structure may be conceptulized as a three-dimensional matrix: the first vector separates costs into production, distribution, and reception; the second vector delineates capital (initial) and operating (annual) costs;…

Analysis of Skills Needed by Graduates of Associate Degree Insurance Major. Final Report.

ERIC Educational Resources Information Center

Dickerson, Jack

This study was undertaken to learn whether the courses offered by the Associate Degree Insurance program at North Central Technical Institute, Wausau, Wisconsin, are adequate to equip prospective employees in the insurance industry. The study was accomplished by surveying 169 insurance companies to obtain the value assigned by respondents to each…

Instructor/Operator Station Design Handbook for Aircrew Training Devices. Final Technical Report for Period March 1982-December 1986.

ERIC Educational Resources Information Center

Warner, H. D.

Human engineering guidelines for the design of instructor/operator stations (IOSs) for aircrew training devices are provided in this handbook. These guidelines specify the preferred configuration of IOS equipment across the range of the anticipated user sizes and performance capabilities. The guidelines are consolidated from various human…

47 CFR 80.273 - Technical requirements for radar equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Technical requirements for radar equipment. 80... Technical requirements for radar equipment. (a) Radar installations on board ships that are required by the Safety Convention or the U.S. Coast Guard to be equipped with radar must comply with the documents...

47 CFR 80.273 - Technical requirements for radar equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical requirements for radar equipment. 80... Technical requirements for radar equipment. (a) Radar installations on board ships that are required by the Safety Convention or the U.S. Coast Guard to be equipped with radar must comply with the documents...

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Identification System (AIS) equipment. 80.231 Section 80.231 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 80.231 Technical Requirements for Class B Automatic Identification System (AIS) equipment. (a) Class B Automatic Identification System (AIS) equipment must meet the technical requirements of IEC 62287...

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Identification System (AIS) equipment. 80.231 Section 80.231 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 80.231 Technical Requirements for Class B Automatic Identification System (AIS) equipment. (a) Class B Automatic Identification System (AIS) equipment must meet the technical requirements of IEC 62287...

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Identification System (AIS) equipment. 80.231 Section 80.231 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 80.231 Technical Requirements for Class B Automatic Identification System (AIS) equipment. (a) Class B Automatic Identification System (AIS) equipment must meet the technical requirements of IEC 62287...

Guidelines for producing training films and videos.

PubMed

Harper, P B

1991-01-01

Drawing from experience in producing a film on the surgical procedure of female sterilization, 4 guidelines to technical film production for training purposes are presented and discussed in this paper. In order of presentation in the text, the paper 1st encourages identifying and securing a technical expert, then clearly identifying steps of the technical procedure, involving trainees and trainers in the production process, and working with experienced producers, scriptwriters, and crew members. Returning to the 1st guideline, the technical advisor will have a central presence during all photography and editing, and ideally should not have any personal investment in the procedure being shown. Prior to script finalization and sorting, research is urged to ensure concrete procedural steps. Printed materials, slides, interviews of experienced clinicians, procedure observation, and test videotape shooting may be called upon and employed as parts of the research phase. Trainees should participate during preliminary research, script development, and pretesting of early film versions, their suggestions for change incorporated where appropriate in the final version. On the final point of securing experienced workers, country nationals sensitive to relevant cultural and background dynamics should be included in the team. The special concerns of airport security regulation and customs requirements knowledge are essential, as well as their attention to assuring adequate on-site electricity for camera equipment.

Learning with On-Line and Hardcopy Tutorials. A Final Report. CDC Technical Report No. 32.

ERIC Educational Resources Information Center

Duffy, T. M.; And Others

Intended to aid in the design of computer systems that promote efficient learning and performance, this study compared the effects of using hard copy and online format tutorials on the learning activities of 48 undergraduate students in either design or engineering. The tutorials, which provided instruction on the use of the equipment and basic…

Development of Model Systematic Trilateral Approach to Provide Continuing Education for Nursing Home and Small Hospital Personnel. Final Report.

ERIC Educational Resources Information Center

Schrader, Marvin A.; And Others

The project was designed to determine the feasibility of having a vocational technical adult education (VTAE) district provide continuing education inservice training for health care facilities using videotape equipment so that employees could gain knowledge and skills without leaving the facility or having to involve time outside the normal…

MSFC Skylab Orbital Workshop, volume 1. [systems analysis and equipment specifications for orbital laboratory

NASA Technical Reports Server (NTRS)

1974-01-01

The technical aspects of the Skylab-Orbital Workshop are discussed. Original concepts, goals, design philosophy, hardware, and testing are reported. The final flight configuration, overall test program, and mission performance are analyzed. The systems which are examined are: (1) the structural system, (2) the meteoroid shield systems, and (3) the environmental/thermal control subsystem.

47 CFR 68.7 - Technical criteria for terminal equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (CONTINUED) CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK General § 68.7 Technical criteria for... switched telephone network. (b) Technical criteria published by the Administrative Council for Terminal... network from harms caused by the connection of terminal equipment, subject to the appeal procedures in...

47 CFR 68.7 - Technical criteria for terminal equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (CONTINUED) CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK General § 68.7 Technical criteria for... switched telephone network. (b) Technical criteria published by the Administrative Council for Terminal... network from harms caused by the connection of terminal equipment, subject to the appeal procedures in...

78 FR 22367 - Proposed Information Collection (Service Data Manual) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... technical medical equipment and devices or mechanical equipment. DATES: Written comments and recommendations... manuals and maintenance/repair manuals when technical medical equipment and devices, or mechanical...

Qualitative Beam Profiling of Light Curing Units for Resin Based Composites.

PubMed

Haenel, Thomas; Hausnerová, Berenika; Steinhaus, Johannes; Moeginger, Ing Bernhard

2016-12-01

This study investigates two technically simple methods to determine the irradiance distribution of light curing units that governs the performance of a visible-light curing resin-based composites. Insufficient light irradiation leads to under-cured composites with poor mechanical properties and elution of residual monomers. The unknown irradiance distribution and its effect on the final restoration are the main critical issues requiring highly sophisticated experimental equipment. The study shows that irradiance distributions of LCUs can easily be determined qualitatively with generally available equipment. This significantly helps dentists in practices to be informed about the homogeneity of the curing lights. Copyright© 2016 Dennis Barber Ltd.

75 FR 20816 - Transportation and Related Equipment Technical Advisory Committee; Notice of Partially Closed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Transportation and Related Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Transportation and Related Equipment Technical Advisory Committee will meet on May 5, 2010, 9:30 a.m., in the Herbert C. Hoover Building, Room 6087B, 14th Street between Constitution &...

The design and implementation of the Technical Facilities Controller (TFC) for the Goldstone deep space communications complex

NASA Technical Reports Server (NTRS)

Killian, D. A.; Menninger, F. J.; Gorman, T.; Glenn, P.

1988-01-01

The Technical Facilities Controller is a microprocessor-based energy management system that is to be implemented in the Deep Space Network facilities. This system is used in conjunction with facilities equipment at each of the complexes in the operation and maintenance of air-conditioning equipment, power generation equipment, power distribution equipment, and other primary facilities equipment. The implementation of the Technical Facilities Controller was completed at the Goldstone Deep Space Communications Complex and is now operational. The installation completed at the Goldstone Complex is described and the utilization of the Technical Facilities Controller is evaluated. The findings will be used in the decision to implement a similar system at the overseas complexes at Canberra, Australia, and Madrid, Spain.

47 CFR Appendix - Technical Appendix 2

Code of Federal Regulations, 2010 CFR

2010-10-01

... PROGRAM Waiver of household eligibility. Pt. 301, App. 2 Technical Appendix 2 TECHNICAL APPENDIX 2—NTIA... promotional prices Equipment cannot be sold conditioned on the purchase of a Smart Antenna or other equipment...

K-edge Subtraction Angiography with Synchrotron X-Rays: Final Technical Report, (February 1, 1984 to January 31, 1987)

DOE R&D Accomplishments Database

Hofstadter, R.

1987-09-01

The aim was the development of an angiographic method and appropriate equipment for imaging with x-rays the coronary arteries in a non-invasive manner. Successive steps involved studies with phantoms, live animals and finally with human subjects. Clinical evaluation of human coronary arteries remains a goal of this and a continuing project, and steps along the way to such an achievement are in process. Transvenous injection of a dye using the method of iodine dichromography near 33.2 keV, the K-edge of iodine, forms the basis of the method

A Handbook for Public Playground Safety. Volume II: Technical Guidelines for Equipment and Surfacing.

ERIC Educational Resources Information Center

Consumer Product Safety Commission, Washington, DC.

This handbook suggests safety guidelines for public playground equipment and describes various surfaces used under the equipment and possible injuries resulting from falls. The handbook is intended for use mainly by manufacturers, installers, school and park officials, and others interested in technical criteria for public playground equipment.…

Medicare program; end-stage renal disease prospective payment system, quality incentive program, and durable medical equipment, prosthetics, orthotics, and supplies.

PubMed

2013-12-02

This rule updates and makes revisions to the End-Stage Renal Disease (ESRD) prospective payment system (PPS) for calendar year (CY) 2014. This rule also sets forth requirements for the ESRD quality incentive program (QIP), including for payment year (PY) 2016 and beyond. In addition, this rule clarifies the grandfathering provision related to the 3-year minimum lifetime requirement (MLR) for Durable Medical Equipment (DME), and provides clarification of the definition of routinely purchased DME. This rule also implements budget-neutral fee schedules for splints and casts, and intraocular lenses (IOLs) inserted in a physician's office. Finally, this rule makes a few technical amendments and corrections to existing regulations related to payment for durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS) items and services.

Technical evaluation of the susceptibility of safety-related systems to flooding caused by the failure of non-Category I systems for Turkey Point Nuclear Power Plant, Units 3 and 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, E.K.

1979-08-01

Three separate reviews of the Turkey Point Units 3 and 4 were conducted by the FPLCO between 1972 and 1975. Initially, at the request of NBC in 1972, the FPLCO reviewed several water systems as sources of flooding. Subsequently, as a result of an abnormal occurrence, the drainage system was reviewed. Finally, the facilities were again reviewed at NRC's request and both the potential sources of flooding and safety-related equipment which could be damaged by flooding were identified. The sources of flooding and the appropriate safety equipment are discussed. An evaluation is presented of measures that were taken by FPLCOmore » to minimize the danger of flooding and to protect safety-related equipment.« less

Special environmental control and life support equipment test analyses and hardware

NASA Technical Reports Server (NTRS)

Callahan, David M.

1995-01-01

This final report summarizes NAS8-38250 contract events, 'Special Environmental Control and Life Support Systems Test Analysis and Hardware'. This report is technical and includes programmatic development. Key to the success of this contract was the evaluation of Environmental Control and Life Support Systems (ECLSS) test results via sophisticated laboratory analysis capabilities. The history of the contract, including all subcontracts, is followed by the support and development of each Task.

An Assessment of Need for Developing and Implementing Technical and Skilled Worker Training for the Solar Energy Industry. Final Report.

ERIC Educational Resources Information Center

Orsak, Charles G., Jr.; And Others

The objective of this project was to determine the need for manpower training in solar energy technology and report it on a regional and/or state basis. Three basic questions were to be answered by the project: (1) Based on a survey of solar heating and cooling systems equipment, what types of systems are being manufactured? (2) What is the…

7 CFR 3203.4 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER TECHNICAL EQUIPMENT..., in writing, an authorized official to approve transfers of excess computers or other technical...) Excess computers or other technical equipment must first be internally screened to ensure it is not...

7 CFR 3203.4 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER TECHNICAL EQUIPMENT..., in writing, an authorized official to approve transfers of excess computers or other technical...) Excess computers or other technical equipment must first be internally screened to ensure it is not...

[Mathematical model of technical equipment of a clinical-diagnostic laboratory].

PubMed

Bukin, S I; Busygin, D V; Tilevich, M E

1990-01-01

The paper is concerned with the problems of technical equipment of standard clinico-diagnostic laboratories (CDL) in this country. The authors suggest a mathematic model that may minimize expenditures for laboratory studies. The model enables the following problems to be solved: to issue scientifically-based recommendations for technical equipment of CDL; to validate the medico-technical requirements for newly devised items; to select the optimum types of uniform items; to define optimal technical decisions at the stage of the design; to determine the lab assistant's labour productivity and the cost of some investigations; to compute the medical laboratory engineering requirement for treatment and prophylactic institutions of this country.

High performance low cost interconnections for flip chip attachment with electrically conductive adhesive. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

This final report is a compilation of final reports from each of the groups participating in the program. The main three groups involved in this effort are the Thomas J. Watson Research Center of IBM Corporation in Yorktown Heights, New York, Assembly Process Design of IBM Corporation in Endicott, New York, and SMT Laboratory of Universal Instruments Corporation in Binghamton, New York. The group at the research center focused on the conductive adhesive materials development and characterization. The group in process development focused on processing of the Polymer-Metal-Solvent Paste (PMSP) to form conductive adhesive bumps, formation of the Polymer-Metal Compositemore » (PMC) on semiconductor devices and study of the bonding process to circuitized organic carriers, and the long term durability and reliability of joints formed using the process. The group at Universal Instruments focused on development of an equipment set and bonding parameters for the equipment to produce bond assembly tooling. Reports of each of these individual groups are presented here reviewing their technical efforts and achievements.« less

Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrar, Paul

2014-06-27

The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

47 CFR 80.275 - Technical Requirements for Class A Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Compulsory Ships § 80.275 Technical Requirements for Class A Automatic Identification System (AIS) equipment. (a) Prior to submitting a certification application for a Class A AIS device, the following... Identification System (AIS) equipment. 80.275 Section 80.275 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...

47 CFR 80.275 - Technical Requirements for Class A Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Compulsory Ships § 80.275 Technical Requirements for Class A Automatic Identification System (AIS) equipment. (a) Prior to submitting a certification application for a Class A AIS device, the following... Identification System (AIS) equipment. 80.275 Section 80.275 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...

47 CFR 80.275 - Technical Requirements for Class A Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Compulsory Ships § 80.275 Technical Requirements for Class A Automatic Identification System (AIS) equipment. (a) Prior to submitting a certification application for a Class A AIS device, the following... Identification System (AIS) equipment. 80.275 Section 80.275 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...

47 CFR 80.275 - Technical Requirements for Class A Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Compulsory Ships § 80.275 Technical Requirements for Class A Automatic Identification System (AIS) equipment. (a) Prior to submitting a certification application for a Class A AIS device, the following... Identification System (AIS) equipment. 80.275 Section 80.275 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...

China Report, Economic Affairs, Number 243, Energy: Status and Development -- VI

DTIC Science & Technology

1982-06-29

the enterprises. 3. We should start the work of technical transformation and equipment renovation with energy conservation as the core. At present...transformation and equipment renovation for the purpose of energy conservation. The technology and many sets of equipment used for energy consumption...true that equipment renovation and technical transformation will cost money. Compared with investment in the exploitation of energy resources, however

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

47 CFR 80.275 - Technical Requirements for Class A Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical Requirements for Class A Automatic Identification System (AIS) equipment. 80.275 Section 80.275 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Equipment Authorization for Compulsory Ships § 80.275...

77 FR 37733 - Technical Standard Order (TSO)-C68a, Airborne Automatic Dead Reckoning Computer Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

..., Airborne Automatic Dead Reckoning Computer Equipment Utilizing Aircraft Heading and Doppler Ground Speed.... ACTION: Notice of intent to cancel Technical Standard Order (TSO)-C68a, Airborne automatic dead reckoning... dead reckoning computer equipment utilizing aircraft heading and Doppler ground speed and drift angle...

SRC-I demonstration plant analytical laboratory methods manual. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.

1983-03-01

This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

Navigation errors encountered using weather-mapping radar for helicopter IFR guidance to oil rigs

NASA Technical Reports Server (NTRS)

Phillips, J. D.; Bull, J. S.; Hegarty, D. M.; Dugan, D. C.

1980-01-01

In 1978 a joint NASA-FAA helicopter flight test was conducted to examine the use of weather-mapping radar for IFR guidance during landing approaches to oil rig helipads. The following navigation errors were measured: total system error, radar-range error, radar-bearing error, and flight technical error. Three problem areas were identified: (1) operational problems leading to pilot blunders, (2) poor navigation to the downwind final approach point, and (3) pure homing on final approach. Analysis of these problem areas suggests improvement in the radar equipment, approach procedure, and pilot training, and gives valuable insight into the development of future navigation aids to serve the off-shore oil industry.

77 FR 26660 - Guidelines for the Transfer of Excess Computers or Other Technical Equipment Pursuant to Section...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

....usda.gov . SUPPLEMENTARY INFORMATION: A. Background A proposed rule was published in the Federal.... Computers or other technical equipment means central processing units, laptops, desktops, computer mouses...

Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

DTIC Science & Technology

1975-12-01

139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

Suitability of Strain Gage Sensors for Integration into Smart Sport Equipment: A Golf Club Example.

PubMed

Umek, Anton; Zhang, Yuan; Tomažič, Sašo; Kos, Anton

2017-04-21

Wearable devices and smart sport equipment are being increasingly used in amateur and professional sports. Smart sport equipment employs various sensors for detecting its state and actions. The correct choice of the most appropriate sensor(s) is of paramount importance for efficient and successful operation of sport equipment. When integrated into the sport equipment, ideal sensors are unobstructive, and do not change the functionality of the equipment. The article focuses on experiments for identification and selection of sensors that are suitable for the integration into a golf club with the final goal of their use in real time biofeedback applications. We tested two orthogonally affixed strain gage (SG) sensors, a 3-axis accelerometer, and a 3-axis gyroscope. The strain gage sensors are calibrated and validated in the laboratory environment by a highly accurate Qualisys Track Manager (QTM) optical tracking system. Field test results show that different types of golf swing and improper movement in early phases of golf swing can be detected with strain gage sensors attached to the shaft of the golf club. Thus they are suitable for biofeedback applications to help golfers to learn repetitive golf swings. It is suggested that the use of strain gage sensors can improve the golf swing technical error detection accuracy and that strain gage sensors alone are enough for basic golf swing analysis. Our final goal is to be able to acquire and analyze as many parameters of a smart golf club in real time during the entire duration of the swing. This would give us the ability to design mobile and cloud biofeedback applications with terminal or concurrent feedback that will enable us to speed-up motor skill learning in golf.

Suitability of Strain Gage Sensors for Integration into Smart Sport Equipment: A Golf Club Example

PubMed Central

Umek, Anton; Zhang, Yuan; Tomažič, Sašo; Kos, Anton

2017-01-01

Wearable devices and smart sport equipment are being increasingly used in amateur and professional sports. Smart sport equipment employs various sensors for detecting its state and actions. The correct choice of the most appropriate sensor(s) is of paramount importance for efficient and successful operation of sport equipment. When integrated into the sport equipment, ideal sensors are unobstructive, and do not change the functionality of the equipment. The article focuses on experiments for identification and selection of sensors that are suitable for the integration into a golf club with the final goal of their use in real time biofeedback applications. We tested two orthogonally affixed strain gage (SG) sensors, a 3-axis accelerometer, and a 3-axis gyroscope. The strain gage sensors are calibrated and validated in the laboratory environment by a highly accurate Qualisys Track Manager (QTM) optical tracking system. Field test results show that different types of golf swing and improper movement in early phases of golf swing can be detected with strain gage sensors attached to the shaft of the golf club. Thus they are suitable for biofeedback applications to help golfers to learn repetitive golf swings. It is suggested that the use of strain gage sensors can improve the golf swing technical error detection accuracy and that strain gage sensors alone are enough for basic golf swing analysis. Our final goal is to be able to acquire and analyze as many parameters of a smart golf club in real time during the entire duration of the swing. This would give us the ability to design mobile and cloud biofeedback applications with terminal or concurrent feedback that will enable us to speed-up motor skill learning in golf. PMID:28430147

47 CFR 5.3 - Scope of service.

Code of Federal Regulations, 2013 CFR

2013-10-01

... type of operations: (a) Experimentations in scientific or technical radio research. (b... Government, or for export purposes. (d) Communications essential to a research project. (e) Technical demonstrations of equipment or techniques. (f) Field strength surveys. (g) Demonstration of equipment to...

47 CFR 5.3 - Scope of service.

Code of Federal Regulations, 2014 CFR

2014-10-01

... type of operations: (a) Experimentations in scientific or technical radio research. (b... Government, or for export purposes. (d) Communications essential to a research project. (e) Technical demonstrations of equipment or techniques. (f) Field strength surveys. (g) Demonstration of equipment to...

Problems facing promotion of astronomy in Arab countries

NASA Astrophysics Data System (ADS)

Osman, Anas M. I.

Promotion of astronomy in Arab countries is facing many scientific and technical problems. Teaching astronomy starts very late in schools, with very simple and limited courses. Many teachers lack a suitable astronomical background, which can lead to incorrect understanding by students of many astronomical ideas and phenomena. Teaching astronomy at higher levels is also very limited, for example: among the 16 universities in Egypt, astronomy is taught in only two faculties of science, just for two years. Graduate students find many difficulties in obtaining jobs related to astronomical activities and this is a serious limitation on the attraction of the study of astronomy. On the other hand, astronomical institutions are suffering from a serious lack of the new sophisticated equipment, while the budget allotted for maintenance is very small, and there is a serious shortage of technical staff. The training of astronomers and technicians is badly needed, since good research work depends on modern technological equipment and the complicated software used in controlling such equipment and in data analysis. Good libraries are needed for promotion of astronomy especially, the Internet facilities available for the staff is very limited. The effects of culture are very clear; many authorities in developing countries believe that astronomy is a luxury. Finally, most of astronomers are engaged with a lot of administration for all matters, so the free time left for science is very limited.

78 FR 72155 - Medicare Program; End-Stage Renal Disease Prospective Payment System, Quality Incentive Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

...This rule updates and makes revisions to the End-Stage Renal Disease (ESRD) prospective payment system (PPS) for calendar year (CY) 2014. This rule also sets forth requirements for the ESRD quality incentive program (QIP), including for payment year (PY) 2016 and beyond. In addition, this rule clarifies the grandfathering provision related to the 3-year minimum lifetime requirement (MLR) for Durable Medical Equipment (DME), and provides clarification of the definition of routinely purchased DME. This rule also implements budget-neutral fee schedules for splints and casts, and intraocular lenses (IOLs) inserted in a physician's office. Finally, this rule makes a few technical amendments and corrections to existing regulations related to payment for durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS) items and services.

Radiotherapy and Nuclear Medicine Project for an Integral Oncology Center at the Oaxaca High Specialization Regional Hospital

NASA Astrophysics Data System (ADS)

De Jesús, M.; Trujillo-Zamudio, F. E.

2010-12-01

A building project of Radiotherapy & Nuclear Medicine services (diagnostic and therapy), within an Integral Oncology Center (IOC), requires interdisciplinary participation of architects, biomedical engineers, radiation oncologists and medical physicists. This report focus on the medical physicist role in designing, building and commissioning stages, for the final clinical use of an IOC at the Oaxaca High Specialization Regional Hospital (HRAEO). As a first step, during design stage, the medical physicist participates in discussions about radiation safety and regulatory requirements for the National Regulatory Agency (called CNSNS in Mexico). Medical physicists propose solutions to clinical needs and take decisions about installing medical equipment, in order to fulfill technical and medical requirements. As a second step, during the construction stage, medical physicists keep an eye on building materials and structural specifications. Meanwhile, regulatory documentation must be sent to CNSNS. This documentation compiles information about medical equipment, radioactivity facility, radiation workers and nuclear material data, in order to obtain the license for the linear accelerator, brachytherapy and nuclear medicine facilities. As a final step, after equipment installation, the commissioning stage takes place. As the conclusion, we show that medical physicists are essentials in order to fulfill with Mexican regulatory requirements in medical facilities.

Technical standing order : airborne supplemental navigation equipment using the global positioning system (GPS)

DOT National Transportation Integrated Search

2001-01-01

This technical standard order (TSO) prescribes the minimum performance standard that airborne supplemental area navigation equipment using the global positioning system (GPS) must meet in order to be identified with the applicable TSO marking. Airbor...

7 CFR 3203.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... described in paragraph (1) of this definition. Computers or other technical equipment means central... 7 Agriculture 15 2013-01-01 2013-01-01 false Definitions. 3203.3 Section 3203.3 Agriculture..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER TECHNICAL EQUIPMENT...

Theoretical Perspectives on Fishing Vessel Accidents and Their Prevention.

ERIC Educational Resources Information Center

Boshier, Roger

Fishing vessel accidents occur because of complex interactions of human, technical, and environmental factors. Although they usually occur because of human actions, thoughts, or behavior, investigators and prevention educators are preoccupied with technical matters and equipment. Equipment, machinery, weather, and other objective facts are…

Electrical termination techniques

NASA Technical Reports Server (NTRS)

Oakey, W. E.; Schleicher, R. R.

1976-01-01

A technical review of high reliability electrical terminations for electronic equipment was made. Seven techniques were selected from this review for further investigation, experimental work, and preliminary testing. From the preliminary test results, four techniques were selected for final testing and evaluation. These four were: (1) induction soldering, (2) wire wrap, (3) percussive arc welding, and (4) resistance welding. Of these four, induction soldering was selected as the best technique in terms of minimizing operator errors, controlling temperature and time, minimizing joint contamination, and ultimately producing a reliable, uniform, and reusable electrical termination.

78 FR 36538 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... training equipment, U.S. Government and contractor engineering, technical and logistics support services... equipment, U.S. Government and contractor engineering, technical and logistics support services, and other... central government and the country's outlying areas. The sale of these C-130Js to Libya will significantly...

47 CFR 68.320 - Supplier's Declaration of Conformity.

Code of Federal Regulations, 2010 CFR

2010-10-01

... steps to ensure that the terminal equipment complies with the appropriate technical standards. (b) The... shown to comply with the applicable technical criteria if no unauthorized change is made in the... from the manufacturer, may upon receiving a written statement from the manufacturer that the equipment...

76 FR 17573 - Energy Conservation Standards for Commercial Refrigeration Equipment: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-30

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... refrigeration equipment. In addition, DOE encourages written comments on these subjects. To inform interested...

Technical and technological solution for vegetal bio-stimulants obtaining

NASA Astrophysics Data System (ADS)

Anghelache, D. G.; Diaconescu, I.; Pătraşcu, R.

2017-08-01

The paper presents a modern technology for bio fertilizers resulted from waste plant mass after harvesting crops Experimental products were obtained rich in nutrients, but unstable in terms of existing microorganisms. Therefore, they conducted further studies to obtaining bio fungicide herb, so in all investigations undertaken so far in the laboratory, were able to conclude that the introduction of medicinal plant extracts with fungicidal effect into the bio fertilizers obtained by degradation of plant material post-harvest can get various bio-stimulants with nourishing effect upon the plants. Following this technology the paper’s objective is to identify a flux scheme for experimental equipment which can produce as final outcome this type of bio-stimulant. Also, in this work, this equipment will be chosen and will be designed following and obeying to the request of every step of the above technology.

77 FR 53962 - Technical Standard Order (TSO)-C68a, Airborne Automatic Dead Reckoning Computer Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

..., Airborne Automatic Dead Reckoning Computer Equipment Utilizing Aircraft Heading and Doppler Ground Speed.... ACTION: Notice of cancellation of Technical Standard Order (TSO)-C68a, Airborne Automatic Dead Reckoning... . SUPPLEMENTARY INFORMATION: Background Doppler radar is a semiautomatic self-contained dead reckoning navigation...

47 CFR 74.1251 - Technical and equipment modifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Translator Stations and FM Broadcast Booster Stations § 74.1251 Technical and equipment modifications. (a) No... translator or booster apparatus which has been certificated by the Commission without prior authority of the... identical power rating which has been certificated by the FCC for use by FM translator or FM booster...

47 CFR 74.1251 - Technical and equipment modifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Translator Stations and FM Broadcast Booster Stations § 74.1251 Technical and equipment modifications. (a) No... translator or booster apparatus which has been certificated by the Commission without prior authority of the... identical power rating which has been certificated by the FCC for use by FM translator or FM booster...

47 CFR 74.1251 - Technical and equipment modifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Translator Stations and FM Broadcast Booster Stations § 74.1251 Technical and equipment modifications. (a) No... translator or booster apparatus which has been certificated by the Commission without prior authority of the... identical power rating which has been certificated by the FCC for use by FM translator or FM booster...

47 CFR 74.1251 - Technical and equipment modifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Translator Stations and FM Broadcast Booster Stations § 74.1251 Technical and equipment modifications. (a) No... translator or booster apparatus which has been certificated by the Commission without prior authority of the... identical power rating which has been certificated by the FCC for use by FM translator or FM booster...

75 FR 42819 - Airborne Area Navigation Equipment Using Loran-C Inputs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-22

... Using Loran-C Inputs AGENCY: Federal Aviation Administration (FAA), DOT ACTION: Notice of cancellation of: (1) Loran-C navigation system Technical Standard Orders (TSO); and (2) the revocation of Loran-C... the cancellation of Technical Standard Order (TSO) C-60, Airborne Area Navigation Equipment Using...

75 FR 22674 - Airborne Area Navigation Equipment Using Loran-C Inputs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... Using Loran-C Inputs AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of cancellation of: (1) Loran-C navigation system Technical Standard Orders (TSO); and (2) the revocation of Loran-C... the cancellation of Technical Standard Order (TSO) C-60, Airborne Area Navigation Equipment Using...

47 CFR 74.1251 - Technical and equipment modifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Translator Stations and FM Broadcast Booster Stations § 74.1251 Technical and equipment modifications. (a) No... translator or booster apparatus which has been certificated by the Commission without prior authority of the... identical power rating which has been certificated by the FCC for use by FM translator or FM booster...

ICU staffing: identification and survey of staff involved in providing technical support services to Australian and New Zealand intensive care units.

PubMed

Carter, B G; Kiraly, N; Hochmann, M; Stephens, R; Osborne, A

2007-04-01

We conducted a survey of all (200) Australian and New Zealand intensive care units to determine the presence and nature of staff employed in a technical support role. Specifically, we attempted to identify staff who are formally employed in a role where they are directly responsible for the equipment used in intensive care. Of 130 returned surveys, 80 units (62%) reported not having any personnel in this role. In these units technical tasks were most commonly performed by registered nurses (79%) but were also performed by a variety of other personnel. Fifty units (38%), consisting of approximately 105 individuals providing a total of 84.3 EFTs and most commonly in public (84%) or metropolitan (70%) hospitals or level 3 (64%) intensive care units, did have one or more staff acting in a formal technical support role. The most common groups filling the technical support role were nurses (42%), technicians (24%), biomedical engineers (10%) and technologists (6%). The most common duties performed were equipment troubleshooting (92%), training (80%), equipment evaluation (80%), ordering supplies (77%), consumable evaluation (75%), equipment cleaning (73%), delivery of supplies (70%), handling product recalls (65%), equipment maintenance (65%) and sitting on hospital committees (52%). This is the first attempt to identify and understand the technical support role in Australian and New Zealand intensive care units. Numerous issues remain and future work will hopefully add to our findings, with the possibility of formal recognition of the role, training and/or accreditation and its extension into other hospital departments.

Project SAGE: solar assisted gas energy. Final report and executive summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Phase III basic objective was establishment of a technical and economic baseline for proper assessment of the practical potential of solar water heating for apartments. Plans can then be formulated to improve SAGE technical design and performance; reduce SAGE costs; refine SAGE market assessment; and identify policies to encourage the use of SAGE. Two SAGE water heating systems were installed and tested. One system was retrofit onto an existing apartment building; the other was installed in a new apartment building. Each installation required approximately 1000 square feet of collector area tilted to an angle of 37/sup 0/ from themore » horizontal, and each was designed to supply about 70 percent of the energy for heating water for approximately 32 to 40 units of a typical two-story apartment complex in Southern California. Actual contruction costs were carefully compiled, and both installations were equipped with performance monitoring equipment. In addition, the operating and maintenance requirements of each installation was evaluated by gas company maintenance engineers. Upon completion of the installation analysis, the SAGE installation cost was further refined by obtaining firm SAGE construction bids from two plumbing contractors in Southern California. Market penetration was assessed by developing a computer simulation program using the technical and economic analysis from the installation experience. Also, the project examined the public policies required to encourage SAGE and other solar energy options. Results are presented and discussed. (WHK)« less

Multi-Cultural Competency-Based Vocational Curricula. Fiberglass Technician. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on fiberglass technician. This program covers 12 instructional areas: orientation, safety, introduction to fiberglass-reinforced plastics, hand lay-up, introduction to equipment operation, chopper operation, gel-coat equipment, finish and…

Development of a Situated Spectrum Analyzer Learning Platform for Enhancing Student Technical Skills

ERIC Educational Resources Information Center

Chuang, Chien-Pen; Jou, Min; Lin, Yen-Ting; Lu, Cheng-Tien

2015-01-01

Electronic engineering industries require technical specialists to operate precision electronic instruments. However, limitations in course designs and equipment availability mean that only a few students are able to use the equipment in practical lessons within a limited timeframe. Also, instruction of techniques and skills are still mostly…

The patient-sensor interface

PubMed Central

Crockett, G. S.

1970-01-01

During the assessment of monitoring equipment on acute medical cases in a general ward, a quantitative investigation of technical faults revealed that 44% of these occurred at the patient-sensor interface. While the attachment of the equipment was accepted by the patient and was suitable for application by nursing staff, this degree of technical breakdown indicates that more progress is necessary in the design of this aspect of monitoring equipment before it is possible to have a reliable system. ImagesFig. 1 PMID:5476136

Advanced ASON prototyping research activities in China

NASA Astrophysics Data System (ADS)

Hu, WeiSheng; Jin, Yaohui; Guo, Wei; Su, Yikai; He, Hao; Sun, Weiqiang

2005-02-01

This paper provides an overview of prototyping research activities of automatically switched optical networks and transport networks (ASONs/ASTNs) in China. In recent years, China has recognized the importance and benefits of the emerging ASON/ASTN techniques. During the period of 2001 and 2002, the national 863 Program of China started the preliminary ASON research projects with the main objectives to build preliminary ASON testbeds, develop control plane protocols and test their performance in the testbeds. During the period of 2003 and 2004, the 863 program started ASTN prototyping equipment projects for more practical applications. Totally 12 ASTN equipments are being developed by three groups led by Chinese venders: ZTE with Beijing University of Posts and Telecommunications (BUPT), Wuhan Research Institute of Posts and Telecommunication (WRI) with Shanghai Jiao Tong University (SJTU), and Huawei Inc. Meanwhile, as the ASTN is maturing, some of the China"s carries are participating in the OIF"s World Interoperability Demonstration, carrying out ASTN test, or deploying ASTN backbone networks. Finally, several ASTN backbone networks being tested or deployed now will be operated by the carries in 2005. The 863 Program will carry out an ASTN field trail in Yangtse River Delta, and finally deploy the 3TNET. 3TNET stands for Tbps transmission, Tbps switching, and Tbps routing, as well as a network integrating the above techniques. A task force under the "863" program is responsible for ASTN equipment specifications and interoperation agreements, technical coordination among all the participants, schedule of the whole project during the project undergoing, and organization of internetworking of all the equipments in the laboratories and field trials.

76 FR 40707 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-11

... training and training equipment, support equipment, U.S. Government and contractor engineering, logistics... training equipment, support equipment, U.S. Government and contractor engineering, logistics, and technical... access to SSEE Increment F services via standard Service Oriented Architecture (SOA) interfaces via...

Large blast and thermal simulator advanced concept driver design by computational fluid dynamics. Final report, 1987-1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Opalka, K.O.

1989-08-01

The construction of a large test facility has been proposed for simulating the blast and thermal environment resulting from nuclear explosions. This facility would be used to test the survivability and vulnerability of military equipment such as trucks, tanks, and helicopters in a simulated thermal and blast environment, and to perform research into nuclear blast phenomenology. The proposed advanced design concepts, heating of driver gas and fast-acting throat valves for wave shaping, are described and the results of CFD studies to advance these new technical concepts fro simulating decaying blast waves are reported.

A satellite data terminal for land mobile use

NASA Technical Reports Server (NTRS)

Sutherland, Colin A.

1990-01-01

Telesat Mobile Incorporated (TMI) has recently introduced the Mobile Data Service (MDS) into Canada. This paper outlines the system design and some key aspects of the detailed design of the Mobile Earth Terminal (MET) developed by Canadian Aeronautics Limited (CAL) for use with the MDS. The technical requirements for the MET are outlined and the equipment architecture is described. The major design considerations for each functional module are then addressed. Environmental conditions unique to the land mobile service are highlighted, along with the measures taken to ensure satisfactory operation and survival of the MET. Finally, the probable direction of future developments is indicated.

ALPHA SMP SYSTEM(S) Final Report CRADA No. TC-1404-97

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seager, M.; Beaudet, T.

Within the scope of this subcontract, Digital Equipment Corporation (DIGITAL) and the University, through the Lawrence Livermore National Laboratory (LLNL), engaged in joint research and development activities of mutual interest and benefit. The primary objectives of these activities were, for LLNL to improve its capability to perform its mission, and for DIGITAL to develop technical capability complimentary to this mission. The collaborative activities had direct manpower investments by DIGITAL and LLNL. The project was divided into four areas of concern, which were handled concurrently. These areas included Gang Scheduling, Numerical Methods, Applications Development and Code Development Tools.

Life sciences payloads analyses and technical program planning studies. [project planning of space missions of space shuttles in aerospace medicine and space biology

NASA Technical Reports Server (NTRS)

1976-01-01

Contractural requirements, project planning, equipment specifications, and technical data for space shuttle biological experiment payloads are presented. Topics discussed are: (1) urine collection and processing on the space shuttle, (2) space processing of biochemical and biomedical materials, (3) mission simulations, and (4) biomedical equipment.

Military Curricula for Vocational & Technical Education. Petroleum Equipment and Technical Operations, QM0142, 19-5.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This subcourse containg lesson assignments, lesson texts, and programmed reviews covers the most frequently used equipment for transporting and storing petroleum products from the time they are purchased until they are consumed by the user. The course is one of a number of military-developed curriculum packages selected for adaptation to…

Final Technical Report: Development of an Abrasion-Resistant Antisoiling Coating for Front-Surface Reflectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gee, Randy C.

A high-performance reflective film has been successfully developed for Concentrating Solar Power (CSP) solar concentrators. Anti-soiling properties and abrasion resistance have been incorporated into the reflector to reduce reflector cleaning costs and to enhance durability. This approach has also resulted in higher reflectance and improved specularity. From the outset of this project we focused on the use of established high-volume roll-to-roll manufacturing techniques to achieve low manufacturing costs on a per ubit area basis. Roll-to-roll manufacturng equipment has a high capital cost so there is an entire industry devoted to roll-to-roll “toll” manufacturing, where the equipment is operated “around themore » clock” to produce a multitude of products for a large variety of uses. Using this approach, the reflective film can be manufactured by toll coaters/converters on an as-needed basis.« less

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

Estimation of Energy Efficiency of Means of Transport According to the Results of Technical Diagnostics

NASA Astrophysics Data System (ADS)

Shalkov, Anton; Mamaeva, Mariya

2017-11-01

The article considers the questions of application of nondestructive methods control of reducers of conveyor belts as a means of transport. Particular attention is paid to such types of diagnostics of technical condition as thermal control and analysis of the state of lubricants. The urgency of carrying out types of nondestructive testing presented in the article is determined by the increase of energy efficiency of transport systems of coal and mining enterprises, in particular, reducers of belt conveyors. Periodic in-depth spectral-emission diagnostics and monitoring of a temperature mode of operation oil in the operation of the control equipment and its technical condition and prevent the MTBF allows the monitoring of the actual technical condition of the gearbox of a belt conveyor. In turn, the thermal imaging diagnostics reveals defects at the earliest stage of their formation and development, which allows planning the volumes and terms of equipment repair. Presents diagnostics of the technical condition will allow monitoring in time the technical condition of the equipment and avoiding its premature failure. Thereby it will increase the energy efficiency of both the transport system and the enterprise as a whole, and also avoid unreasonable increases in operating and maintenance costs.

Investigation of a family of power conditioners integrated into a utility grid: final report Category I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, P.; Putkovich, R.P.

1981-07-01

A study was conducted of the requirements for and technologies applicable to power conditioning equipment in residential solar photovoltaic systems. A survey of companies known or thought to manufacture power conditioning equipment was conducted to asses the technology. Technical issues regarding ac and dc interface requirements were studied. A baseline design was selected to be a good example of existing technology which would not need significant development effort for its implementation. Alternative technologies are evaluated to determine which meet the baseline specification, and their costs and losses are evaluated. Areas in which cost improvements can be obtained are studied, andmore » the three best candidate technologies--the current-sourced converter, the HF front end converter, and the programmed wave converter--are compared. It is concluded that the designs investigated will meet, or with slight improvement could meet, short term efficiency goals. Long term efficiency goals could be met if an isolation transformer were not required in the power conditioning equipment. None of the technologies studied can meet cost goals unless further improvements are possible. (LEW)« less

Problems of systems dataware using optoelectronic measuring means of linear displacement

NASA Astrophysics Data System (ADS)

Bazykin, S. N.; Bazykina, N. A.; Samohina, K. S.

2017-10-01

Problems of the dataware of the systems with the use of optoelectronic means of the linear displacement are considered in the article. The classification of the known physical effects, realized by the means of information-measuring systems, is given. The organized analysis of information flows in technical systems from the standpoint of determination of inaccuracies of measurement and management was conducted. In spite of achieved successes in automation of machine-building and instruments-building equipment in the field of dataware of the technical systems, there are unresolved problems, concerning the qualitative aspect of the production process. It was shown that the given problem can be solved using optoelectronic lazer information-measuring systems. Such information-measuring systems are capable of not only executing the measuring functions, but also solving the problems of management and control during processing, thereby guaranteeing the quality of final products.

WHITE BOX: LOW COST BOX FOR LAPAROSCOPIC TRAINING

PubMed Central

MARTINS, João Maximiliano Pedron; RIBEIRO, Roberto Vanin Pinto; CAVAZZOLA, Leandro Totti

2015-01-01

Background: Laparoscopic surgery is a reality in almost all surgical centers. Although with initial greater technical difficulty for surgeons, the rapid return to activities, less postoperative pain and higher quality aesthetic stimulates surgeons to evolve technically in this area. However, unlike open surgery where learning opportunities are more accessible, the laparoscopic training represents a challenge in surgeon formation. Aim: To present a low cost model for laparoscopic training box. Methods: This model is based in easily accessible materials; the equipment can be easily found based on chrome mini jet and passes rubber thread and a webcam attached to an aluminum handle. Results: It can be finalized in two days costing R$ 280,00 (US$ 90). Conclusion: It is possible to stimulate a larger number of surgeons to have self training in laparoscopy at low cost seeking to improve their surgical skills outside the operating room. PMID:26537148

3C.07: ARE THE PHYSICIANS RELUCTANT TO PRACTICE TELEMEDICINE IN HYPERTENSION?

PubMed

Sublet, M Lopez; Courand, P Y; Bally, S; Krummel, T; Dimitrov, Y; Brucker, M; Coz, S Regnier-Le; Dourmap-Collas, C; Mourad, J J; Steichen, O; Ott, J; Barone-Rochette, G; Bogetto-Graham, L; Rossignol, P; Barber-Chamoux, N; Le Jeune, S; Vautrin, E; Agnoletti, D; Baguet, S; Sosner, P

2015-06-01

The high number of patients with uncontrolled hypertension is still a public health pattern. The e-health contains all electronic health services used in order to improve communication between all the different actors. In arterial hypertension, few data exists on the possibilities: 1/ for patients to easily e-transfer their results of home blood pressure measurement (HBPM); 2/ for practitioners to receive and assess these HBPM results. Furthermore, physician's reluctance is often reported as a constraint for telemedicine development. Thus, we aimed to collect data on technical equipment of physicians, and on their expectations about this new way of relationship. 57 physicians, hypertension specialists (36 ± 8 years old, 56% men, mostly (88%) hospital practitioners) completed a self-administered questionnaire. The prevalence of technical equipment is summarized in Table 1. 77.1% of physicians thought that telemedicine could improve the control of hypertension, 29.8% thought they could provide less frequent consultations to their patients and 24.5 % that HBPM information would contribute to the fight against inertia. 83.2% of physicians would agree that HBPM data be transferred to a non- medical staff, a nurse in most cases (59.5%). Finally, while 89.5% of physicians declared they support the development of telemedicine in their daily practice, 100% of them found 3 kinds of "limits" to this exchange method. The main obstacles were: budget (49%), lack of legal frame (43%), medical reluctance (42%), difficulties in accessing or in mastering informatics tool (38.5%), confidentiality (28%), absence of direct benefit (21%), patient reluctance (21%).(Figure is included in full-text article.) : The equipment of physicians in home or mobile devices appears no longer an obstacle for the development of a program dedicated to telemedicine. The majority of medical practitioners working in specialized hypertension department agreed with Internet e-transfer of HBPM data, including paramedics. However, all physicians highlighted various obstacles to its expansion: technical support, lack of legal frame, and financial limits.

77 FR 21834 - Airborne Radar Altimeter Equipment (For Air Carrier Aircraft)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Airborne Radar Altimeter Equipment... Technical Standard Order (TSO)-C67, Airborne Radar Altimeter Equipment (For Air Carrier Aircraft). SUMMARY: This is a confirmation notice of the cancellation of TSO-C67, Airborne Radar Altimeter Equipment (For...

Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

Development of a system for monitoring technical state of the equipment of a cogeneration steam turbine unit

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Brodov, Yu. M.; Novoselov, V. B.

2012-12-01

Generalized results from the work on developing elements of a comprehensive system for monitoring technical state of the equipment of cogeneration turbines are presented. The parameters of the electrohydraulic turbine control system are considered together with a number of problems concerned with assessing the state of condensers and delivery water heaters.

Modernization of the automation control system of technological processes at the preparation plant in the conditions of technical re-equipment

NASA Astrophysics Data System (ADS)

Lyakhovets, M. V.; Wenger, K. G.; Myshlyaev, L. P.; Shipunov, M. V.; Grachev, V. V.; Melkozerov, M. Yu; Fairoshin, Sh A.

2018-05-01

The experience of modernization of the automation control system of technological processes at the preparation plant under the conditions of technical re-equipment of the preparation plant “Barzasskoye Tovarischestvo” LLC (Berezovsky) is considered. The automated process control systems (APCS), the modernization goals and the ways to achieve them are indicated, the main subsystems of the integrated APCS are presented, the enlarged functional and technical structure of the upgraded system is given. The procedure for commissioning an upgraded system is described.

77 FR 52698 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... training equipment, publications and technical data, U.S. Government and contractor technical and logistics personnel services and other related elements of program and logistics support. (iv) Military Department..., publications and technical data, U.S. Government and contractor technical and logistics personnel services and...

Method of Data storing, collection and aggregation for definition of life-cycle resources of electromechanical equipment

NASA Astrophysics Data System (ADS)

Zhukovskiy, Y.; Koteleva, N.

2017-10-01

Analysis of technical and technological conditions for the emergence of emergency situations during the operation of electromechanical equipment of enterprises of the mineral and raw materials complex shows that when developing the basis for ensuring safe operation, it is necessary to take into account not only the technical condition, but also the non-stationary operation of the operating conditions of equipment, and the nonstationarity of operational operating parameters of technological processes. Violations of the operation of individual parts of the machine, not detected in time, can lead to severe accidents at work, as well as to unplanned downtime and loss of profits. That is why, the issues of obtaining and processing Big data obtained during the life cycle of electromechanical equipment, for assessing the current state of the electromechanical equipment used, timely diagnostics of emergency and pre-emergency modes of its operation, estimating the residual resource, as well as prediction the technical state on the basis of machine learning are very important. This article is dedicated to developing the special method of data storing, collection and aggregation for definition of life-cycle resources of electromechanical equipment. This method can be used in working with big data and can allow extracting the knowledge from different data types: the plants’ historical data and the factory historical data. The data of the plants contains the information about electromechanical equipment operation and the data of the factory contains the information about a production of electromechanical equipment.

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

Beyond good intentions: lessons on equipment donation from an African hospital.

PubMed

Howie, Stephen R C; Hill, Sarah E; Peel, David; Sanneh, Momodou; Njie, Malick; Hill, Philip C; Mulholland, Kim; Adegbola, Richard A

2008-01-01

In 2000, a referral hospital in the Gambia accepted a donation of oxygen concentrators to help maintain oxygen supplies. The concentrators broke down and were put into storage. A case study was done to find the reasons for the problem and to draw lessons to help improve both oxygen supplies and the success of future equipment donations. A technical assessment of the concentrators was carried out by a biomedical engineer with relevant expertise. Semi-structured interviews were undertaken with key informants, and content analysis and inductive approaches were applied to construct the history of the episode and the reasons for the failure. Interviews confirmed the importance of technical problems with the equipment. They also revealed that the donation process was flawed, and that the hospital did not have the expertise to assess or maintain the equipment. Technical assessment showed that all units had the wrong voltage and frequency, leading to overheating and breakdown. Subsequently a hospital donations committee was established to oversee the donations process. On-site biomedical engineering expertise was arranged with a nongovernmental organization (NGO) partner. Appropriate donations of medical equipment, including oxygen concentrators, can be of benefit to hospitals in resource-poor settings, but recipients and donors need to actively manage donations to ensure that the donations are beneficial. Success requires planning, technical expertise and local participation. Partners with relevant skills and resources may also be needed. In 2002, WHO produced guidelines for medical equipment donations, which address problems that might be encountered. These guidelines should be publicized and used.

Beyond good intentions: lessons on equipment donation from an African hospital

PubMed Central

Hill, Sarah E; Peel, David; Sanneh, Momodou; Njie, Malick; Hill, Philip C; Mulholland, Kim; Adegbola, Richard A

2008-01-01

Abstract Objective In 2000, a referral hospital in the Gambia accepted a donation of oxygen concentrators to help maintain oxygen supplies. The concentrators broke down and were put into storage. A case study was done to find the reasons for the problem and to draw lessons to help improve both oxygen supplies and the success of future equipment donations. Methods A technical assessment of the concentrators was carried out by a biomedical engineer with relevant expertise. Semi-structured interviews were undertaken with key informants, and content analysis and inductive approaches were applied to construct the history of the episode and the reasons for the failure. Findings Interviews confirmed the importance of technical problems with the equipment. They also revealed that the donation process was flawed, and that the hospital did not have the expertise to assess or maintain the equipment. Technical assessment showed that all units had the wrong voltage and frequency, leading to overheating and breakdown. Subsequently a hospital donations committee was established to oversee the donations process. On-site biomedical engineering expertise was arranged with a nongovernmental organization (NGO) partner. Conclusion Appropriate donations of medical equipment, including oxygen concentrators, can be of benefit to hospitals in resource-poor settings, but recipients and donors need to actively manage donations to ensure that the donations are beneficial. Success requires planning, technical expertise and local participation. Partners with relevant skills and resources may also be needed. In 2002, WHO produced guidelines for medical equipment donations, which address problems that might be encountered. These guidelines should be publicized and used. PMID:18235890

Amplifiers in the radio-electronic equipment of aircraft

NASA Astrophysics Data System (ADS)

Khol'Nyi, Vladimir Ia.

The applications, classification, and technical specifications of airborne electronic amplifiers are discussed. Particular attention is given to the general design and principles of operation of single amplification cascades and multicascade amplifiers, including dc, audio, and video amplifiers used as part of the radio-electronic equipment of modern aircraft. The discussion also covers the principal technical and performance characteristics of various amplifiers, their operating conditions, service, and repair.

48 CFR 1523.7002 - Waivers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ENVIRONMENTAL, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Energy-Efficient Computer Equipment 1523.7002 Waivers. (a) There are several types of computer equipment which technically fall under the... types of equipment: (1) LAN servers, including file servers; application servers; communication servers...

48 CFR 1523.7002 - Waivers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ENVIRONMENTAL, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Energy-Efficient Computer Equipment 1523.7002 Waivers. (a) There are several types of computer equipment which technically fall under the... types of equipment: (1) LAN servers, including file servers; application servers; communication servers...

48 CFR 1523.7002 - Waivers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ENVIRONMENTAL, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Energy-Efficient Computer Equipment 1523.7002 Waivers. (a) There are several types of computer equipment which technically fall under the... types of equipment: (1) LAN servers, including file servers; application servers; communication servers...

47 CFR 27.51 - Equipment authorization.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Equipment authorization. 27.51 Section 27.51 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Technical Standards § 27.51 Equipment authorization. (a) Each transmitter utilized for...

47 CFR 27.51 - Equipment authorization.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Equipment authorization. 27.51 Section 27.51 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Technical Standards § 27.51 Equipment authorization. (a) Each transmitter utilized for...

Recovery Act: Energy Efficiency of Data Networks through Rate Adaptation (EEDNRA) - Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthew Andrews; Spyridon Antonakopoulos; Steve Fortune

2011-07-12

This Concept Definition Study focused on developing a scientific understanding of methods to reduce energy consumption in data networks using rate adaptation. Rate adaptation is a collection of techniques that reduce energy consumption when traffic is light, and only require full energy when traffic is at full provisioned capacity. Rate adaptation is a very promising technique for saving energy: modern data networks are typically operated at average rates well below capacity, but network equipment has not yet been designed to incorporate rate adaptation. The Study concerns packet-switching equipment, routers and switches; such equipment forms the backbone of the modern Internet.more » The focus of the study is on algorithms and protocols that can be implemented in software or firmware to exploit hardware power-control mechanisms. Hardware power-control mechanisms are widely used in the computer industry, and are beginning to be available for networking equipment as well. Network equipment has different performance requirements than computer equipment because of the very fast rate of packet arrival; hence novel power-control algorithms are required for networking. This study resulted in five published papers, one internal report, and two patent applications, documented below. The specific technical accomplishments are the following: • A model for the power consumption of switching equipment used in service-provider telecommunication networks as a function of operating state, and measured power-consumption values for typical current equipment. • An algorithm for use in a router that adapts packet processing rate and hence power consumption to traffic load while maintaining performance guarantees on delay and throughput. • An algorithm that performs network-wide traffic routing with the objective of minimizing energy consumption, assuming that routers have less-than-ideal rate adaptivity. • An estimate of the potential energy savings in service-provider networks using feasibly-implementable rate adaptivity. • A buffer-management algorithm that is designed to reduce the size of router buffers, and hence energy consumed. • A packet-scheduling algorithm designed to minimize packet-processing energy requirements. Additional research is recommended in at least two areas: further exploration of rate-adaptation in network switching equipment, including incorporation of rate-adaptation in actual hardware, allowing experimentation in operational networks; and development of control protocols that allow parts of networks to be shut down while minimizing disruption to traffic flow in the network. The research is an integral part of a large effort within Bell Laboratories, Alcatel-Lucent, aimed at dramatic improvements in the energy efficiency of telecommunication networks. This Study did not explicitly consider any commercialization opportunities.« less

7 CFR 1728.50 - Removal of an item from listing or technical acceptance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...

76 FR 38608 - Sensors and Instrumentation Technical Advisory Committee;

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

77 FR 64464 - Information Systems Technical Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-22

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... of export controls applicable to information systems equipment and technology. Wednesday, November 7...

47 CFR 87.147 - Authorization of equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Authorization of equipment. 87.147 Section 87.147 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Technical Requirements § 87.147 Authorization of equipment. (a) Certification may be...

Research on the technical requirements standards of high efficiency precipitator in power industries for assessment

NASA Astrophysics Data System (ADS)

Jin, Huang; Ling, Lin; Jun, Guo; Jianguo, Li; Yongzhong, Wang

2017-11-01

Facing the increasingly severe situation of air pollution, China are now positively promoting the evaluation of high efficiency air pollution control equipments and the research of the relative national standards. This paper showed the significance and the effect of formulating the technical requirements of high efficiency precipitator equipments for assessment national standards in power industries as well as the research thoughts and principle of these standards. It introduce the qualitative and quantitative evaluation requirements of high efficiency precipitators using in power industries and the core technical content such as testing, calculating, evaluation methods and so on. The implementation of a series of national standards is in order to lead and promote the production and application of high efficiency precipitator equipments in the field of the prevention of air pollution in national power industries.

WindWaveFloat (WWF): Final Scientific Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alla Weinstein; Roddier, Dominique; Banister, Kevin

2012-03-30

Principle Power Inc. and National Renewable Energy Lab (NREL) have completed a contract to assess the technical and economic feasibility of integrating wave energy converters into the WindFloat, resulting in a new concept called the WindWaveFloat (WWF). The concentration of several devices on one platform could offer a potential for both economic and operational advantages. Wind and wave energy converters can share the electrical cable and power transfer equipment to transport the electricity to shore. Access to multiple generation devices could be simplified, resulting in cost saving at the operational level. Overall capital costs may also be reduced, provided thatmore » the design of the foundation can be adapted to multiple devices with minimum modifications. Finally, the WindWaveFloat confers the ability to increase energy production from individual floating support structures, potentially leading to a reduction in levelized energy costs, an increase in the overall capacity factor, and greater stability of the electrical power delivered to the grid. The research conducted under this grant investigated the integration of several wave energy device types into the WindFloat platform. Several of the resulting system designs demonstrated technical feasibility, but the size and design constraints of the wave energy converters (technical and economic) make the WindWaveFloat concept economically unfeasible at this time. Not enough additional generation could be produced to make the additional expense associated with wave energy conversion integration into the WindFloat worthwhile.« less

7 CFR 2812.5 - Restrictions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... for the conduct of technical and scientific educational and research activities. Eligible Groups FSC..., Dental, and Veterinary Equipment and Supplies. 66 Instruments and Laboratory Equipment. 67 Photographic...

7 CFR 2812.5 - Restrictions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... for the conduct of technical and scientific educational and research activities. Eligible Groups FSC..., Dental, and Veterinary Equipment and Supplies. 66 Instruments and Laboratory Equipment. 67 Photographic...

7 CFR 2812.5 - Restrictions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... for the conduct of technical and scientific educational and research activities. Eligible Groups FSC..., Dental, and Veterinary Equipment and Supplies. 66 Instruments and Laboratory Equipment. 67 Photographic...

7 CFR 2812.5 - Restrictions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... for the conduct of technical and scientific educational and research activities. Eligible Groups FSC..., Dental, and Veterinary Equipment and Supplies. 66 Instruments and Laboratory Equipment. 67 Photographic...

Diagnosis of the Computer-Controlled Milling Machine, Definition of the Working Errors and Input Corrections on the Basis of Mathematical Model

NASA Astrophysics Data System (ADS)

Starikov, A. I.; Nekrasov, R. Yu; Teploukhov, O. J.; Soloviev, I. V.; Narikov, K. A.

2016-10-01

Manufactures, machinery and equipment improve of constructively as science advances and technology, and requirements are improving of quality and longevity. That is, the requirements for surface quality and precision manufacturing, oil and gas equipment parts are constantly increasing. Production of oil and gas engineering products on modern machine tools with computer numerical control - is a complex synthesis of technical and electrical equipment parts, as well as the processing procedure. Technical machine part wears during operation and in the electrical part are accumulated mathematical errors. Thus, the above-mentioned disadvantages of any of the following parts of metalworking equipment affect the manufacturing process of products in general, and as a result lead to the flaw.

Methane enrichment digestion experiments at the anaerobic experimental test unit at Walt Disney World. Final report, March 1989-August 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, V.J.; Hill, A.H.

1993-06-01

The goal of the project was to determine the technical feasibility of utilizing a novel concept in anaerobic digestion, in-situ methane enrichment digestion or MED for producing utility-grade gas from a pilot-scale anaerobic digester. MED tests conducted during this program consistently achieved digester product gas with a methane (CH4) content of greater than 90% (on a dry-, nitrogen-free basis). The MED concept, because it requires relatively simple equipment and modest energy input, has the potential to simplify gas cleanup requirements and substantially reduce the cost of converting wastes and biomass to pipeline quality gas.

The Establishment of a New Friction Stir Welding Process Development Facility at NASA/MSFC

NASA Technical Reports Server (NTRS)

Carter, Robert W.

2009-01-01

Full-scale weld process development is being performed at MSFC to develop the tools, fixtures, and facilities necessary for Ares I production. Full scale development in-house at MSFC fosters technical acuity within the NASA engineering community, and allows engineers to identify and correct tooling and equipment shortcomings before they become problems on the production floor. Finally, while the new weld process development facility is currently being outfitted in support of Ares I development, it has been established to support all future Constellation Program needs. In particular, both the RWT and VWT were sized with the larger Ares V hardware in mind.

Study to determine the technical and economic feasibility of reclaiming chemicals used in micellar polymer and low tension surfactant flooding. Final report. [Ultrafiltration membranes and reverse osmosis membranes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, R.H.; Himmelblau, A.; Donnelly, R.G.

1978-02-01

Energy Resources Company has developed a technology for use with enhanced oil recovery to achieve emulsion breaking and surfactant recovery. By using ultrafiltration membranes, the Energy Resources Company process can dewater an oil-in-water type emulsion expected from enhanced oil recovery projects to the point where the emulsion can be inverted and treated using conventional emulsion-treating equipment. By using a tight ultrafiltration membrane or a reverse osmosis membrane, the Energy Resources Company process is capable of recovering chemicals such as surfactants used in micellar polymer flooding.

Electronically tunable phase locked loop oscillator

NASA Astrophysics Data System (ADS)

Balasis, M.; Davis, M. R.; Jackson, C. R.

1982-02-01

This report describes the design and development of a low noise, high power, variable oscillator incorporating a high 'Q' electronically tunable resonator as the frequency determining element. The VCO provides improved EMC performance in phase locked synthesizers which are a part of communications equipments. The oscillator combines a low noise VMOS transistor with the selectivity and out-of-band attenuation of a coaxial resonator to provide superior EMC performance. Several oscillator designs were examined and the basis for the final configuration is presented. Oscillator noise is discussed and models for analysis are explained. A brass board model was constructed and tested and the technical results are presented.

Space Station needs, attributes and architectural options: Summary briefing

NASA Technical Reports Server (NTRS)

1983-01-01

Computerized data sorting and analysis techniques were used with a data base accumulated in over 20 years of space station studies to evaluate candidate missions and select a final model of 88 missions. The social, cultural, scientific, technical, and commercial benefits to be accrued from each mission were identified. Requirements were determined for satellite servicing; payload placement and retrieval; refueling; repair; testing; assembly; and construction. Missions drivers determined include crew, remote manipulating system, external parts, instrumentation, extravehicular activity/manned maneuvering unit, and voice/video equipment. User interest for commercial applications were determined. Variable architecture based on a modular concept with multi-use elements is proposed.

Analysis of commercial equipment and instrumentation for Spacelab payloads, volume 2

NASA Technical Reports Server (NTRS)

1974-01-01

Technical results are presented of a study to investigate analytically the feasibility of using commercially available laboratory equipment and instrumentation in the spacelab in support of various experiments. The feasibility is demonstrated by the breadth of application of commercial, airborne, and military equipment to experiment equipment requirements in the spacelab, and the cost effectiveness of utilizing this class of equipment instead of custom-built aerospace equipment typical of past designs. Equipment design and specifications are discussed.

47 CFR 68.604 - Requirements for submitting technical criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Requirements for submitting technical criteria. 68.604 Section 68.604 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER...) may establish technical criteria for terminal equipment pursuant to ANSI consensus decision-making...

Development of Hydrogen Education Programs for Government Officials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baxter, Shannon; Keller, Russ

1. Subcontractor/Technical Subject Matter Expert (Tasks 1-3) 2. Technical lead for LFG cleanup and hydrogen production systems Support for Feasibility Study 3. Technical Lead for Feasibility Study Coordination of site preparation activities for all project equipment 4. Host site

Safety in the operating room during orthopedic trauma surgery-incidence of adverse events related to technical equipment and logistics.

PubMed

van Delft, E A K; Schepers, T; Bonjer, H J; Kerkhoffs, G M M J; Goslings, J C; Schep, N W L

2018-04-01

Safety in the operating room is widely debated. Adverse events during surgery are potentially dangerous for the patient and staff. The incidence of adverse events during orthopedic trauma surgery is unknown. Therefore, we performed a study to quantify the incidence of these adverse events. Primary objective was to determine the incidence of adverse events related to technical equipment and logistics. The secondary objective was to evaluate the consequences of these adverse events. We completed a cross-sectional observational study to assess the incidence, consequences and preventability of adverse events related to technical equipment and logistics during orthopedic trauma surgery. During a 10 week period, all orthopedic trauma operations were evaluated by an observer. Six types of procedures were differentiated: osteosynthesis; arthroscopy; removal of hardware; joint replacement; bone grafting and other. Adverse events were divided in six categories: staff dependent factors; patient dependent factors; anaesthesia; imaging equipment; operation room equipment and instruments and implants. Adverse events were defined as any factor affecting the surgical procedure in a negative way. Hundred-fifty operative procedures were included. In 54% of the procedures, at least one adverse event occurred. In total, 147 adverse events occurred, with a range of 1-5 per procedure. Most adverse events occurred during joint replacement procedures. Thirty-seven percent of the incidents concerned defect, incorrect connected or absent instruments. In 36% of the procedures adverse events resulted in a prolonged operation time with a median prolongation of 10.0 min. In more than half of orthopedic trauma surgical procedures adverse events related to technical equipment and logistics occurred, most of them could easily be prevented. These adverse events could endanger the safety of the patient and staff and should therefore be reduced. 4.

Assessment of technical equipment supply in healthcare institutions: example of Almaty.

PubMed

Kurakbayev, Kuralbai K; Issayev, Daniyar S; Koshimbekov, Murat K; Kumar, Ainur B

2014-09-01

The share of healthcare-related expenditure in the Gross Domestic Product of Kazakhstan is relatively small, and it is strategically important to restructure budgetary expenses in favor of healthcare with simultaneous redistribution of resources in accordance with changing demands and prioritization of high-quality medical care. The aim of this study was to analyze resource provision to healthcare organizations in Kazakhstan and its structure and level assessment. The study is based on a comparative assessment of technical and technological equipment of medical institutions in Almaty, Kazakhstan. We analyzed the scope and structure of the financial component of the resource base in Almaty. We carried out information processing and analysis methods, content analysis, mathematical treatment, as well as conducted case studies. Also, we held opinion poll among medical staff (specialists, managerial staff) (n = 300) P for trend < 0.001 and patients (n = 210) P for trend < 0.001. About 18.8% of patients do not receive medical care because of defects of the equipment, whereas 19.9% of patients claim that the reason of refusal of the provision of medical services is an equipment overload. Most of the respondents referred to on poor technical equipment, mismatch with the world standards of performance and competitiveness. Lack of advanced medical technology, inadequate financing, insufficient supply of domestic medical equipment, and inadequate procurement by tender were also noted. The obtained data point to the need for optimization and upgrading medical equipment at various levels of healthcare.

Assessment of technical equipment supply in healthcare institutions: example of Almaty

PubMed Central

Kurakbayev, Kuralbai K.; Issayev, Daniyar S.; Koshimbekov, Murat K.; Kumar, Ainur B.

2014-01-01

Background: The share of healthcare-related expenditure in the Gross Domestic Product of Kazakhstan is relatively small, and it is strategically important to restructure budgetary expenses in favor of healthcare with simultaneous redistribution of resources in accordance with changing demands and prioritization of high-quality medical care. The aim of this study was to analyze resource provision to healthcare organizations in Kazakhstan and its structure and level assessment. Materials and Methods: The study is based on a comparative assessment of technical and technological equipment of medical institutions in Almaty, Kazakhstan. We analyzed the scope and structure of the financial component of the resource base in Almaty. We carried out information processing and analysis methods, content analysis, mathematical treatment, as well as conducted case studies. Also, we held opinion poll among medical staff (specialists, managerial staff) (n = 300) P for trend < 0.001 and patients (n = 210) P for trend < 0.001. Results: About 18.8% of patients do not receive medical care because of defects of the equipment, whereas 19.9% of patients claim that the reason of refusal of the provision of medical services is an equipment overload. Conclusion: Most of the respondents referred to on poor technical equipment, mismatch with the world standards of performance and competitiveness. Lack of advanced medical technology, inadequate financing, insufficient supply of domestic medical equipment, and inadequate procurement by tender were also noted. The obtained data point to the need for optimization and upgrading medical equipment at various levels of healthcare. PMID:25535494

40 CFR 63.140 - Process wastewater provisions-delay of repair.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or a gap, crack, tear, or hole has been identified, is allowed if the repair is technically.... (b) Delay of repair of equipment for which a control equipment failure or a gap, crack, tear, or hole... equipment for which a control equipment failure or a gap, crack, tear, or hole has been identified is also...

25 CFR 547.5 - What are the rules of interpretation and of general application for this part?

Code of Federal Regulations, 2010 CFR

2010-04-01

... INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II... standards apply. Gaming equipment and software used with Class II gaming systems shall meet all applicable... of winning less than 1 in 50,000,000. (d) Approved equipment and software only. All gaming equipment...

76 FR 39845 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... export controls applicable to information systems equipment and technology. Wednesday, July 27 Public... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...

78 FR 63162 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... of export controls applicable to information systems equipment and technology. Wednesday, November 6... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...

75 FR 64258 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-19

... export controls applicable to information systems equipment and technology. Wednesday, November 3 Public... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...

78 FR 42753 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... of export controls applicable to information systems equipment and technology. Wednesday, July 31... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...

47 CFR 2.915 - Grant of application.

Code of Federal Regulations, 2012 CFR

2012-10-01

... RULES AND REGULATIONS Equipment Authorization Procedures Application Procedures for Equipment... officially notice, that: (1) The equipment is capable of complying with pertinent technical standards of the rule part(s) under which it is to be operated; and, (2) A grant of the application would serve the...

47 CFR 2.915 - Grant of application.

Code of Federal Regulations, 2010 CFR

2010-10-01

... RULES AND REGULATIONS Equipment Authorization Procedures Application Procedures for Equipment... officially notice, that: (1) The equipment is capable of complying with pertinent technical standards of the rule part(s) under which it is to be operated; and, (2) A grant of the application would serve the...

[Prospects of material and technical development of the department of anaesthesia and intensive care].

PubMed

Shchegolev, A V

2013-07-01

The author of the article came to conclusion that in view of electronics breakthrough, nanotechnology and genetic engineering development it is necessary to reconsider the system of emergency care, anesthesia and intensive care service on the battlefield, reduction of the influence of pathologic factors and secure evacuation to special treatment department. One of the main criteria is constant improvement of material and technical equipment for heavy rescue. Necessity of dislocation, problems with communications infrastructure, poor medical gas supply are the main problems which cause the necessity of development of special equipment which must be equal characteristics and security level of analogues, used in peace time. The last equipment can not be used by troops for various reasons. Probably, due to the absence mass sanitary loss, reduction of medical service in consequence of material and technical equipment must be proven. It is necessary to emphasize, that the department of anaesthesia and intensive care of the Ministry of Defence of the Russian Federation copes with the tasks of war and peacetime throughout the history.

Impact of oscillations of shafts on machining accuracy using non-stationary machines

NASA Astrophysics Data System (ADS)

Fedorenko, M. A.; Bondarenko, J. A.; Pogonin, A. A.

2018-03-01

The solution of the problem of restoring parts and units of equipment of the large mass and size is possible on the basis of the development of the research base, including the development of models and theoretical relations, revealing complex reasons for causes of damage and equipment failure. This allows one to develop new effective technologies of maintenance and repair, implementation of which ensures the efficiency and durability of the machines. The development of new forms of technical maintenance and repair of equipment, based on a systematic evaluation of its technical condition with the help of modern diagnostic tools can significantly reduce the duration of the downtime.

Porphyrin Tests

MedlinePlus

... variability can occur due to differences in testing equipment, chemical reagents, and techniques. This is a reason ... healthcare practitioner's office? No. Porphyrin tests require specialized equipment and technical skills. Some tests may be performed ...

76 FR 323 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

75 FR 1339 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

76 FR 63607 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

78 FR 19638 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

77 FR 61737 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-11

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

77 FR 23222 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

75 FR 14426 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

78 FR 1198 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

78 FR 60251 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. [[Page...

77 FR 37652 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

75 FR 62508 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...

77 FR 2270 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-17

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... the level of export controls applicable to sensors and instrumentation equipment and technology...

75 FR 39920 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

78 FR 40098 - Sensors And Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors And Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

77 FR 37652 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... that affect the level of export controls applicable to information systems equipment and technology... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...

46 CFR 163.002-3 - Applicable technical regulations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Applicable technical regulations. 163.002-3 Section 163.002-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Hoist § 163.002-3 Applicable technical regulations...

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glasser, Alan H.

Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

47 CFR 68.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK General § 68.3 Definitions. As used in this part: Demarcation... switched telephone network with the applicable rules and regulations in this part and with the technical... network, or if the equipment is imported, the importer, or if the terminal equipment is assembled from...

47 CFR 68.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK General § 68.3 Definitions. As used in this part: Demarcation... switched telephone network with the applicable rules and regulations in this part and with the technical... network, or if the equipment is imported, the importer, or if the terminal equipment is assembled from...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2013-01-01 2013-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2012-01-01 2012-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2014-01-01 2014-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2011-01-01 2011-01-01 false Contents of applications; technical information in final...

Environmental assessment of an enhanced-oil-recovery steam generator equipped with a low-NOx burner. Volume 1. Technical results. Final report, January 1984-January 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castaldini, C.; Waterland, L.R.; Lips, H.I.

1986-02-01

The report discusses results from sampling flue gas from an enhanced-oil-recovery steam generator (EOR steamer) equipped with an MHI PM low-NOx burner. The tests included burner performance/emission mapping tests, comparative testing of an identical steamer equipped with a conventional burner, and comprehensive testing of the low-NOx-burner-equipped steamer. Comprehensive test measurements included continuous flue-gas monitoring; source assessment sampling system testing with subsequent laboratory analysis to give total flue-gas organics in two boiling point ranges and specific quantitation on the semivolatile organic priority pollutants; C1 to C6 hydrocarbon sampling; Methods 5/8 sampling for particulate and SO/sub 2/ and SO/sub 3/ emissions; andmore » emitted particle size distribution tests using Andersen impactors. Full-load NOx emissions of 110 ppm (3% O/sub 2/) could be maintained from the low-NOx burner at acceptable CO and smoke emissions, compared to about 300 ppm (3% O/sub 2/) from the conventional-burner-equipped steamer. At the low-NOx condition, CO, SO/sub 2/, and SO/sub 3/ emissions were 93, 594, and 3.1 ppm, respectively. Particulate emissions were 39 mg/dscm with a mean particle diameter of 3 to 4 micrometers. Total organic emissions were 11.1 mg/dscm, almost exclusively volatile (C1 to C6) organics. Three PAHs were detected at from 0.1 to 1.4 micrograms/dscm.« less

The prediction of the residual life of electromechanical equipment based on the artificial neural network

NASA Astrophysics Data System (ADS)

Zhukovskiy, Yu L.; Korolev, N. A.; Babanova, I. S.; Boikov, A. V.

2017-10-01

This article is devoted to the prediction of the residual life based on an estimate of the technical state of the induction motor. The proposed system allows to increase the accuracy and completeness of diagnostics by using an artificial neural network (ANN), and also identify and predict faulty states of an electrical equipment in dynamics. The results of the proposed system for estimation the technical condition are probability technical state diagrams and a quantitative evaluation of the residual life, taking into account electrical, vibrational, indirect parameters and detected defects. Based on the evaluation of the technical condition and the prediction of the residual life, a decision is made to change the control of the operating and maintenance modes of the electric motors.

Automated technical validation--a real time expert system for decision support.

PubMed

de Graeve, J S; Cambus, J P; Gruson, A; Valdiguié, P M

1996-04-15

Dealing daily with various machines and various control specimens provides a lot of data that cannot be processed manually. In order to help decision-making we wrote specific software coping with the traditional QC, with patient data (mean of normals, delta check) and with criteria related to the analytical equipment (flags and alarms). Four machines (3 Ektachem 700 and 1 Hitachi 911) analysing 25 common chemical tests are controlled. Every day, three different control specimens and one more once a week (regional survey) are run on the various pieces of equipment. The data are collected on a 486 microcomputer connected to the central computer. For every parameter the standard deviation is compared with the published acceptable limits and the Westgard's rules are computed. The mean of normals is continuously monitored. The final decision induces either an alarm sound and the print-out of the cause of rejection or, if no alarms happen, the daily print-out of recorded data, with or without the Levey Jennings graphs.

Cost Factors in Scaling in SfM Collections and Processing Solutions

NASA Astrophysics Data System (ADS)

Cherry, J. E.

2015-12-01

In this talk I will discuss the economics of scaling Structure from Motion (SfM)-style collections from 1 km2 and below to 100's and 1000's of square kilometers. Considerations include the costs of the technical equipment: comparisons of small, medium, and large-format camera systems, as well as various GPS-INS systems and their impact on processing accuracy for various Ground Sampling Distances. Tradeoffs between camera formats and flight time are central. Weather conditions and planning high altitude versus low altitude flights are another economic factor, particularly in areas of persistently bad weather and in areas where ground logistics (i.e. hotel rooms and pilot incidentals) are expensive. Unique costs associated with UAS collections and experimental payloads will be discussed. Finally, the costs of equipment and labor differs in SfM processing than in conventional orthomosaic and LiDAR processing. There are opportunities for 'economies of scale' in SfM collections under certain circumstances but whether the accuracy specifications are firm/fixed or 'best effort' makes a difference.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond, David W.; Gaither, Katherine N.; Polsky, Yarom

Sandia National Laboratories (Sandia) has a long history in developing compact, mobile, very high-speed drilling systems and this technology could be applied to increasing the rate at which boreholes are drilled during a mine accident response. The present study reviews current technical approaches, primarily based on technology developed under other programs, analyzes mine rescue specific requirements to develop a conceptual mine rescue drilling approach, and finally, proposes development of a phased mine rescue drilling system (MRDS) that accomplishes (1) development of rapid drilling MRDS equipment; (2) structuring improved web communication through the Mine Safety & Health Administration (MSHA) web site;more » (3) development of an improved protocol for employment of existing drilling technology in emergencies; (4) deployment of advanced technologies to complement mine rescue drilling operations during emergency events; and (5) preliminary discussion of potential future technology development of specialized MRDS equipment. This phased approach allows for rapid fielding of a basic system for improved rescue drilling, with the ability to improve the system over time at a reasonable cost.« less

Managing the replacement cycle of laser inventory.

PubMed

Davis, C E

1992-01-01

Medical lasers are quickly moving into the replacement phase of technology management. Barnes Hospital (St. Louis, MO) is using its laser team to define a process of planned laser replacement using the experience gained from traditional medical equipment replacement cycles, quality improvement principles and tools, and other formalized interdisciplinary teams. The process described in this paper has six basic steps: (1) A decision is made to request a replacement laser. (2) An appropriation request form is completed and submitted with the clinical and/or technical justifications. (3) Those requests initiated outside of the Clinical Engineering Department are reviewed by the Clinical Engineer/Medical Laser Safety Officer (CE/MLSO). (4) The CE/MLSO presents the requests to the hospital Laser Committee, and (5) then to the Laser Users' Group. (6) Finally, an Expenditure Authorization Committee reviews all capital expense requests, including those for replacement lasers, and allocates funds for the next fiscal year. This paper illustrates and evaluates the process, using an example from the review process for 1993 equipment purchases at Barnes Hospital.

47 CFR 95.129 - Station equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES General Mobile Radio Service (GMRS) § 95.129 Station equipment. Every station in a GMRS system... find out if a particular transmitter has been certificated for the GMRS. All station equipment in a GMRS system must comply with the technical rules in part 95. [63 FR 68975, Dec. 14, 1998] ...

Using Three-Dimensional Interactive Graphics To Teach Equipment Procedures.

ERIC Educational Resources Information Center

Hamel, Cheryl J.; Ryan-Jones, David L.

1997-01-01

Focuses on how three-dimensional graphical and interactive features of computer-based instruction can enhance learning and support human cognition during technical training of equipment procedures. Presents guidelines for using three-dimensional interactive graphics to teach equipment procedures based on studies of the effects of graphics, motion,…

Vocational Education Tool and Equipment Inventory.

ERIC Educational Resources Information Center

Lewis, James P.; Burrows, Robert T.

This study was conducted to provide information on equipment needs, the extent of planning to upgrade equipment, and technological advancements necessary to continue providing quality training to entry-level students and incumbent workers. The results were based on a 98 percent return from 72 area vocational-technical school directors, 17…

Technical Aspects Related to the Application of SFM Photogrammetry in High Mountain

NASA Astrophysics Data System (ADS)

Scaioni, M.; Crippa, J.; Corti, M.; Barazzetti, L.; Fugazza, D.; Azzoni, R.; Cernuschi, M.; Diolaiuti, G. A.

2018-05-01

Structure-from-Motion (SfM) photogrammetry is a flexible and powerful tool to provide 3D point clouds describing the surface of objects. Due to the easy transportability and low-cost of necessary equipment with respect to laser scanning techniques, SfM photogrammetry has great potential to be applied in harsh high-mountain environment. Here point clouds and derived by-products (DEM's, orthoimages, Virtual-Reality models) are needed to document surface morphology and to investigate dynamic processes such as landslides, avalanches, river and soil erosion, glacier retreat. On the other hand, from both the literature and the direct experience of the authors, there are some technical issues that still deserve thorough investigations. The paper would like to address some open problems and suggest solutions, in particular on regards of the photogrammetric network design, the strategy for georeferencing the final products, and for their comparison within time. The discussion is documented with some examples, mainly from surveying campaigns at the Forni Glacier in Italian Alps.

Producing ammonium sulfate from flue gas desulfurization by-products

USGS Publications Warehouse

Chou, I.-Ming; Bruinius, J.A.; Benig, V.; Chou, S.-F.J.; Carty, R.H.

2005-01-01

Emission control technologies using flue gas desulfurization (FGD) have been widely adopted by utilities burning high-sulfur fuels. However, these technologies require additional equipment, greater operating expenses, and increased costs for landfill disposal of the solid by-products produced. The financial burdens would be reduced if successful high-volume commercial applications of the FGD solid by-products were developed. In this study, the technical feasibility of producing ammonium sulfate from FGD residues by allowing it to react with ammonium carbonate in an aqueous solution was preliminarily assessed. Reaction temperatures of 60, 70, and 80??C and residence times of 4 and 6 hours were tested to determine the optimal conversion condition and final product evaluations. High yields (up to 83%) of ammonium sulfate with up to 99% purity were achieved under relatively mild conditions. The optimal conversion condition was observed at 60??C and a 4-hour residence time. The results of this study indicate the technical feasibility of producing ammonium sulfate fertilizer from an FGD by-product. Copyright ?? Taylor & Francis Inc.

Brokerage mechanism proposal for teleradiology studies distribution

NASA Astrophysics Data System (ADS)

Ferreira Polónia, Daniel; da Silva, Augusto F.; Costa, Carlos M.; Oliveira, José Luís

2008-03-01

The asymmetric distribution of PACS equipment and service providers across countries leads typically to the need to hire third party service professionals outside the institutions where the exams were made. In this paper we present a brokerage mechanism that puts customers and remote providers together in a seamless way. The proposed solution, asserted with a case study for the Portuguese national health system, addresses the problems that now impair the optimal provision of those services, enabling a more agile relationship between buyers and sellers, optimizing administrative work and complying with clinical and legal requirements under discussion in the European Union for the free movement of patients and professional health workers. In this document, the detailed process and technical description of the broker functioning is made, and the main benefits for the participants are also evaluated from a technical and economical point of view. Finally, in the discussion chapter, an assessment of the creation of a spot market for imaging studies is made and the integration with other similar markets is discussed.

Trends and problems in development of the power plants electrical part

NASA Astrophysics Data System (ADS)

Gusev, Yu. P.

2015-03-01

The article discusses some problems relating to development of the electrical part of modern nuclear and thermal power plants, which are stemming from the use of new process and electrical equipment, such as gas turbine units, power converters, and intellectual microprocessor devices in relay protection and automated control systems. It is pointed out that the failure rates of electrical equipment at Russian and foreign power plants tend to increase. The ongoing power plant technical refitting and innovative development processes generate the need to significantly widen the scope of research works on the electrical part of power plants and rendering scientific support to works on putting in use innovative equipment. It is indicated that one of main factors causing the growth of electrical equipment failures is that some of components of this equipment have insufficiently compatible dynamic characteristics. This, in turn may be due to lack or obsolescence of regulatory documents specifying the requirements for design solutions and operation of electric power equipment that incorporates electronic and microprocessor control and protection devices. It is proposed to restore the system of developing new and updating existing departmental regulatory technical documents that existed in the 1970s, one of the fundamental principles of which was placing long-term responsibility on higher schools and leading design institutions for rendering scientific-technical support to innovative development of components and systems forming the electrical part of power plants. This will make it possible to achieve lower failure rates of electrical equipment and to steadily improve the competitiveness of the Russian electric power industry and energy efficiency of generating companies.

Managing the equipment service life in rendering engineering support to NPP operation

NASA Astrophysics Data System (ADS)

Ryasnyy, S. I.

2015-05-01

Apart from subjecting metal to nondestructive testing and determining its actual state, which are the traditional methods used for managing the service life of NPP equipment during its operation, other approaches closely linked with rendering engineering support to NPP operation have emerged in recent decades, which, however, have been covered in publications to a lesser extent. Service life management matters occupy the central place in the structure of engineering support measures. Application of the concept of repairing NPP equipment based on assessing its technical state and the risk of its failure makes it possible to achieve significantly smaller costs for maintenance and repairs and produce a larger amount of electricity due to shorter planned outages. Decreasing the occurrence probability of a process-related abnormality through its prediction is a further development of techniques for monitoring the technical state of equipment and systems. The proposed and implemented procedure for predicting the occurrence of process-related deviations from normal NPP operation opens the possibility to record in the online mode the trends in changes of process parameters that are likely to lead to malfunctions in equipment operation and to reduce the probability of power unit unloading when an abnormal technical state of equipment occurs and develops by recording changes in the state at an early stage and taking timely corrective measures. The article presents the structure of interconnections between the objectives and conditions of adjustment and commissioning tests, in which the management of equipment service life (saving and optimizing the service life) occupies the central place. Special attention is paid to differences in resource saving and optimization measures.

The Effects of Integrating On-Going Training for Technical Documentation Teams

ERIC Educational Resources Information Center

Catanio, Joseph T.; Catanio, Teri L.

2010-01-01

The tools and techniques utilized in the technical communications profession are constantly improving and changing. Information Technology (IT) organizations devote the necessary resources to equip and train engineering, marketing, and sales teams, but often fail to do so for technical documentation teams. Many IT organizations tend to view…

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... exemptions for technical or engineering hardship. You may request additional engine allowances under... technical or engineering problems that prevent you from meeting the requirements of this part. You must show... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... exemptions for technical or engineering hardship. You may request additional engine allowances under... technical or engineering problems that prevent you from meeting the requirements of this part. You must show... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... exemptions for technical or engineering hardship. You may request additional engine allowances under... technical or engineering problems that prevent you from meeting the requirements of this part. You must show... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...

19 CFR 151.13 - Approval of commercial gaugers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gauger). In general, each technical staff member should have, at a minimum, six months training and..., manufacturer, and country-of-origin. (ii) Major equipment records. Records for each major piece of equipment...

Rationale for evaluating a closed food chain for space habitats

NASA Technical Reports Server (NTRS)

Modell, M.; Spurlock, J. M.

1980-01-01

Closed food cycles for long duration space flight and space habitation are examined. Wash water for a crew of six is economically recyclable after a week, while a total closed loop water system is effective only if the stay exceeds six months' length. The stoichiometry of net plant growth is calculated and it is shown that the return of urine, feces, and inedible plant parts to the food chain, along with the addition of photosynthesis, closes the food chain loop. Scenarios are presented to explore the technical feasibility of achieving a closed loop system. An optimal choice of plants is followed by processing, waste conversion, equipment specifications, and control requirements, and finally, cost-effectiveness.

Final Technical Report Laramie County Community College: Utility-Scale Wind Energy Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas P. Cook

The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technologymore » curriculum.« less

Investigation of Zerodur material processing

NASA Technical Reports Server (NTRS)

Johnson, R. Barry

1993-01-01

The Final Report of the Center for Applied Optics (CAO), of The University of Alabama (UAH) study entitled 'Investigation of Zerodur Material Processing' is presented. The objectives of the effort were to prepare glass samples by cutting, grinding, etching, and polishing block Zerodur to desired specifications using equipment located in the optical shop located in the Optical System Branch at NASA/MSFC; characterize samples for subsurface damage and surface roughness; utilize Zerodur samples for coating investigations; and perform investigations into enhanced optical fabrication and metrology techniques. The results of this investigation will be used to support the Advanced X Ray Astrophysics Facility (AXAF) program as well as other NASA/MSFC research programs. The results of the technical effort are presented and discussed.

Low Cost Equipment for Science and Technology Education. A Resource Document on Low Cost Equipment That You Can Make and Use.

ERIC Educational Resources Information Center

Lowe, N. K., Ed.

This document provides technical information and simple instructions for constructing 84 different pieces of science equipment. Each entry includes: (1) name of item; (2) purpose of the equipment; (3) person who submitted the information; (4) line drawing of prototype; (5) list of low-cost materials needed; (6) construction procedures; (7)…

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

Do Technical Aids for Patient Handling Prevent Musculoskeletal Complaints in Health Care Workers?—A Systematic Review of Intervention Studies

PubMed Central

Hegewald, Janice; Berge, Wera; Heinrich, Philipp; Staudte, Ronny; Freiberg, Alice; Scharfe, Julia; Girbig, Maria; Nienhaus, Albert; Seidler, Andreas

2018-01-01

The physical load ensuing from the repositioning and moving of patients puts health care workers at risk of musculoskeletal complaints. Technical equipment developed to aid with patient handling should reduce physical strain and workload; however, the efficacy of these aids in preventing musculoskeletal disorders and complaints is still unclear. A systematic review of controlled intervention studies was conducted to examine if the risk of musculoskeletal complaints and disorders is reduced by technical patient handling equipment. MEDLINE®/PubMed®, EMBASE®, Allied and Complementary Medicine Database (AMED), and Cumulative Index of Nursing and Allied Health Literature (CINAHL®) were searched using terms for nursing, caregiving, technical aids, musculoskeletal injuries, and complaints. Randomized controlled trials and controlled before-after studies of interventions including technical patient handling equipment were included. The titles and abstracts of 9554 publications and 97 full-texts were screened by two reviewers. The qualitative synthesis included one randomized controlled trial (RCT) and ten controlled before-after studies. A meta-analysis of four studies resulted in a pooled risk ratio for musculoskeletal injury claims (post-intervention) of 0.78 (95% confidence interval 0.68–0.90). Overall, the methodological quality of the studies was poor and the results often based on administrative injury claim data, introducing potential selection bias. Interventions with technical patient handling aids appear to prevent musculoskeletal complaints, but the certainty of the evidence according to GRADE approach ranged from low to very low. PMID:29522440

Do Technical Aids for Patient Handling Prevent Musculoskeletal Complaints in Health Care Workers?-A Systematic Review of Intervention Studies.

PubMed

Hegewald, Janice; Berge, Wera; Heinrich, Philipp; Staudte, Ronny; Freiberg, Alice; Scharfe, Julia; Girbig, Maria; Nienhaus, Albert; Seidler, Andreas

2018-03-09

The physical load ensuing from the repositioning and moving of patients puts health care workers at risk of musculoskeletal complaints. Technical equipment developed to aid with patient handling should reduce physical strain and workload; however, the efficacy of these aids in preventing musculoskeletal disorders and complaints is still unclear. A systematic review of controlled intervention studies was conducted to examine if the risk of musculoskeletal complaints and disorders is reduced by technical patient handling equipment. MEDLINE ® /PubMed ® , EMBASE ® , Allied and Complementary Medicine Database (AMED), and Cumulative Index of Nursing and Allied Health Literature (CINAHL ® ) were searched using terms for nursing, caregiving, technical aids, musculoskeletal injuries, and complaints. Randomized controlled trials and controlled before-after studies of interventions including technical patient handling equipment were included. The titles and abstracts of 9554 publications and 97 full-texts were screened by two reviewers. The qualitative synthesis included one randomized controlled trial (RCT) and ten controlled before-after studies. A meta-analysis of four studies resulted in a pooled risk ratio for musculoskeletal injury claims (post-intervention) of 0.78 (95% confidence interval 0.68-0.90). Overall, the methodological quality of the studies was poor and the results often based on administrative injury claim data, introducing potential selection bias. Interventions with technical patient handling aids appear to prevent musculoskeletal complaints, but the certainty of the evidence according to GRADE approach ranged from low to very low.

Technical considerations in the preparation and dispensing of chemotherapy.

PubMed

Peters, B G

1995-01-01

The safe handling of cytotoxic agents is intimately related to the technical aspects of drug preparation, dispensing, and administration. The appropriate equipment, supplies, protective clothing, and waste disposal systems must be available to the health care worker who is called upon to prepare cytotoxic agents. In addition, the health care worker must be adequately trained in and familiar with the safe use of these products and equipment and the preparation techniques or manipulations necessary during cytotoxic drug compounding. The article describes in detail and reviews the technical considerations, such as aseptic technique, proper use of the biological safety cabinet, gowning and gloving, labeling, and waste disposal, that are essential to the safe preparation and dispensing of chemotherapy.

76 FR 63714 - Technical Standard Order (TSO)-C129a, Airborne Supplemental Navigation Equipment Using the Global...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

..., Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS) AGENCY: Federal Aviation Administration (FAA), DOT ACTION: Notice of cancellation of TSO-C129a, Airborne Supplemental... cancellation of TSO-C129a, Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS...

Capital Equipment: How to Get It and Manage It.

ERIC Educational Resources Information Center

Caernarven-Smith, Patricia

1994-01-01

Describes how technical communicators can learn to write capital equipment requests that specify the needed new equipment, show the benefits to the company from buying it, and recommend the way to account for it. Shows that to do so, they must learn some business basics and make friends outside their own departments. (SR)

Troubleshooting Complex Equipment in the Military Services: Research and Prospects. Technical Report No. 92.

ERIC Educational Resources Information Center

Bond, Nicholas A.; Towne, Douglas M.

Psychological approaches to the troubleshooting of complex military equipments are designed to improve the selection, motivation, and training of technicians. Methods for enhancing the understanding of the physical relations in equipment, the hierarchical analysis and practice of sub-skills, and the general logic of searching behavior are aspects…

Technical notes published in BJOMS over a 2-year period--should we be doing it differently?

PubMed

Singh, M; Shekar, K; Shelley, M; Mackenzie, N; Spencer, H; Kiani, H; Brennan, P A

2009-06-01

Between January 2007 and December 2008, 44 technical notes or related publications (such as letters) were published in the British Journal of Oral and Maxillofacial Surgery (BJOMS). These covered most of the remit of the specialty and ranged from operative surgical techniques to the use of digital photographs to orientate surgical specimens. However, there would seem to be very little feedback on the value of these articles in everyday practice. We reviewed these technical notes and assessed readability, the value and use of illustrations, the possible expense and/or equipment required in their use, and finally the frequency that the techniques could be used. The anonymised publications were read and scored by a minimum of two dentally qualified senior house officers, two doubly qualified specialist registrars, an SAS grade and two consultants in oral and maxillofacial surgery. The six techniques that gained the highest mean average score are briefly discussed. Although we used a relatively small number of assessors who might not be representative of the whole BJOMS readership, this study would suggest that some sort of change in the way that these technical notes are published should be considered. Options might include inviting a commentary from the reviewers who have tried the technique and also encouraging colleagues to report their experiences of these techniques in the 'letters to the editor' section.

77 FR 23117 - Rigging Equipment for Material Handling Construction Standard; Correction and Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

...OSHA is correcting its sling standard for construction titled ``Rigging Equipment for Material Handling'' by removing the rated capacity tables and making minor, nonsubstantive revisions to the regulatory text.

42 CFR 417.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... health professionals of health (including medical) and other records, equipment, and professional... has contracted to provide; (3) Share medical and other records, equipment, and professional, technical... PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS...

78 FR 24061 - Minimum Technical Standards for Class II Gaming Systems and Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... Register that established technical standards for ensuring the integrity of electronic Class II games and aids. 73 FR 60508, Oct. 10, 2008. The technical standards were designed to assist tribal gaming... Class II gaming systems. The standards did not classify which games were Class II games and which games...

10 CFR 455.111 - Applicant certifications for technical assistance and energy conservation measure grants to...

Code of Federal Regulations, 2012 CFR

2012-01-01

... for technical assistance programs and energy conservation measures, including renewable resource... share of an energy conservation project where a lien is placed by the lender on equipment funded under... 10 Energy 3 2012-01-01 2012-01-01 false Applicant certifications for technical assistance and...

10 CFR 455.111 - Applicant certifications for technical assistance and energy conservation measure grants to...

Code of Federal Regulations, 2011 CFR

2011-01-01

... for technical assistance programs and energy conservation measures, including renewable resource... share of an energy conservation project where a lien is placed by the lender on equipment funded under... 10 Energy 3 2011-01-01 2011-01-01 false Applicant certifications for technical assistance and...

10 CFR 455.111 - Applicant certifications for technical assistance and energy conservation measure grants to...

Code of Federal Regulations, 2013 CFR

2013-01-01

... for technical assistance programs and energy conservation measures, including renewable resource... share of an energy conservation project where a lien is placed by the lender on equipment funded under... 10 Energy 3 2013-01-01 2013-01-01 false Applicant certifications for technical assistance and...

10 CFR 455.111 - Applicant certifications for technical assistance and energy conservation measure grants to...

Code of Federal Regulations, 2014 CFR

2014-01-01

... for technical assistance programs and energy conservation measures, including renewable resource... share of an energy conservation project where a lien is placed by the lender on equipment funded under... 10 Energy 3 2014-01-01 2014-01-01 false Applicant certifications for technical assistance and...

Henry Taube and Coordination Chemistry

Science.gov Websites

Shifts Caused by Cr++ in Aqueous Solutions, DOE Technical Report, 1962 Reactions of Solvated Ions Final Report, DOE Technical Report, 1962 Isotopic Discrimination of Some Solutes in Liquid Ammonia, DOE Technical Report, 1966 Final Technical Report of Research, DOE Technical Report, 1972 Top Additional Web

George A. Olah, Carbocation and Hydrocarbon Chemistry

Science.gov Websites

. Final Technical Report. [HF:BF{sub 2}/H{sub 2}] , DOE Technical Report, 1980 Superacid Catalyzed Coal Conversion Chemistry. 1st and 2nd Quarterly Technical Progress Reports, September 1, 1983-March 30, 1984 , DOE Technical Report, 1984 Superacid Catalyzed Coal Conversion Chemistry. Final Technical Report

West Valley feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pirro, J.

This report presents the results of a technical assessment of decontamination alternative prepared for the Western New York Nuclear Service Center (WNYNSC). The purpose of the assessment is to determine the recommended method for decontamination of cell surfaces and decontamination and removal of fuel reprocessing cell equipment to permit manual entry into the cells for the installation of waste solidification equipment. The primary cells of interest are the PMC, GPC, and CPC because they offer the largest usable volume for the solidification program. The secondary cells include XC-1, XC-2, XC-3 and the PPC which may be needed to support themore » solidification program. Five decontamination assessments were evaluated (A-E). The assessments included the estimated cost, occupational exposure, duration, manpower, waste volume generated, and final cell radiation levels achieved with the alternative decontamination methods. The methods varied from thorough destructive decontamination to equipment removal without decontamination followed by cell wall and floor decontamination. The recommended method for the primary cells is to utilize the remote manipulators and cranes to the maximum extent possible to decontaminate equipment and cell surfaces remotely, and to remove the equipment for temporary on-site storage. The recommended method for secondary cell decontamination is to remotely decontaminate the cells to the maximum extent possible prior to manned entry for contact-removal of the fuel reprocessing equipment (Assessment D). Assessment A is expected to cost $8,713,500 in 1980 dollars (including a 25% contingency) and will result in an occupational exposure of 180.3 manRem. Assessment D is expected to cost $11,039,800 and will result in an occupational exposure of 259 manRems.« less

Overview of Avionics and Electrical Ground Support Equipment

NASA Technical Reports Server (NTRS)

Clarke, Sean C.

2011-01-01

Presents an overview of the Crew Module Avionics and the associated Electrical Ground Support Equipment for the Pad Abort 1 flight test of the Orion Program. A limited selection of the technical challenges and solutions are highlighted.

47 CFR 90.201 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements for use of frequencies and equipment in the radio services governed by this part. Such requirements include standards for acceptability of equipment, frequency tolerance, modulation, emissions, power, and bandwidths. Special additional technical standards applicable to certain frequency bands and...

TSO C-129 approvals and anticipated approvals

DOT National Transportation Integrated Search

2001-01-01

This document contains a table of the approvals and anticipated approvals of TSO-C129a equipment (the technical standard order (TSO) for Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS)). This TSO prescribes the mi...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, K.; Wood, R.T.; Hassan, M.

This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be locatedmore » in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants.« less

Applicability of the beamed power concept to lunar rovers, construction, mining, explorers and other mobile equipment

NASA Technical Reports Server (NTRS)

Christian, Jose L., Jr.

1989-01-01

Some of the technical issues dealing with the feasibility of high power (10 Kw to 100 Kw) mobile manned equipment for settlement, exploration and exploitation of Lunar resources are addressed. Short range mining/construction equipment, a moderate range (50 Km) exploration vehicle, and an unlimited range explorer are discussed.

The Audio-Visual Equipment Directory; Twenty-Second Edition, 1976-1977.

ERIC Educational Resources Information Center

Herickes, Sally, Ed.

Over 2,000 currently available items are listed in the 1976-1977 Audio-Visual Equipment Directory with specifications on price, model, weight, capacity, accessories, and technical details. Charts for screen size, lists of film and tape running times, an index to industry trade names, and a directory of equipment manufacturers are also provided.…

CTE: Education for a Strong Economy

ERIC Educational Resources Information Center

Conneely, Nancy; Hyslop, Alisha

2018-01-01

For nearly a century, career and technical education (CTE) programs across the United States have focused on equipping students with technical and life skills to help them become productive citizens. This brief report presents the benefits of CTE.

Challenges in legislation, recycling system and technical system of waste electrical and electronic equipment in China.

PubMed

Zhang, Shengen; Ding, Yunji; Liu, Bo; Pan, De'an; Chang, Chein-chi; Volinsky, Alex A

2015-11-01

Waste electrical and electronic equipment (WEEE) has been one of the fastest growing waste streams worldwide. Effective and efficient management and treatment of WEEE has become a global problem. As one of the world's largest electronic products manufacturing and consumption countries, China plays a key role in the material life cycle of electrical and electronic equipment. Over the past 20 years, China has made a great effort to improve WEEE recycling. Centered on the legal, recycling and technical systems, this paper reviews the progresses of WEEE recycling in China. An integrated recycling system is proposed to realize WEEE high recycling rate for future WEEE recycling. Copyright © 2015 Elsevier Ltd. All rights reserved.

77 FR 46306 - Fluxapyroxad; Pesticide Tolerances Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

...; Pesticide Tolerances Technical Amendment AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule; technical amendment. SUMMARY: EPA issued a final rule in the Federal Register of May 14, 2012, concerning.... Inadvertently, the terminology for the oilseed crop group and for dried plums was incorrect. This technical...

[Development of a service on line advice and information technology management for health].

PubMed

Berrospi Polo, Victor; Rodriguez Abad, Juan; Bobadilla Aguilar, Juan; Di Liberto Moreno, Carlos; Díaz Arroyo, Cecilia; Rafael Quipan, Carlos

2015-10-01

To validate an advisory service and online information technology management for health and helps to make assessment and acquisition processes an informed medical equipment according to the market and the needs of the health institutions. Internet via a technological solution supported ona data base containing systematic and updated information on technical specifications of 25 compared medical equipment, the same reference prices, list of suppliers, agents and / or producers and technical standards are developed. The"virtual" technical assistance was made with the support of a team of specialists in Health Technology Management, the decision makers in the planning, evaluation and procurement of biomedical equipment. The validation of the service was conducted by involving specialists in the field of Health Technology Management, from different disciplines and institutions who worked in health, public and private. They used the service for a period of time to verify its feasibility of use as well as its usefulness for their planning, evaluation and procurement of biomedical equipment. To these experts we applied a survey before and after them about the software developed in this project. We found that it is common to use the internet to search for information on medical equipment.Also,an increase on the view that the application will help in procurement of biomedical equipment(40% to 78%) was observed, it will improve the information system(40% to 89%) and communication among physicians,nurses, planners, engineers and other professionals involved in this process(20% to 78%). There is a need for a technological tool available with such features contribute to technology management in Peru.

Equipment and Analytical Companies Meeting Continuous Challenges May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

2015-03-01

This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white papers. In the equipment domain, this is equally prevalent among a broad range of companies, mainly focusing on discrete areas. As an example, the flow chemistry and secondary drug product communities are almost entirely disconnected. Control and Process Analytical Technologies (PAT) companies are active in both domains. The equipment actors are a very diverse group with a few major Original Equipment Manufacturers (OEM) players and a variety of SME, project providers, integrators, upstream downstream providers, and specialist PAT. In some cases, partnerships or alliances are formed to increase critical mass. This white paper has focused on small molecules; equipment associated with biopharmaceuticals is covered in a separate white paper. More specifics on equipment detail are provided in final dosage form and drug substance white papers. The equipment and analytical development from laboratory to pilot to production is important, with a variety of sensors and complexity reducing with scale. The importance of robust processing rather than overcomplex control strategy mitigation is important. A search of nonacademic literature highlights, with a few notable exceptions, a relative paucity of material. Much focuses on the economics and benefits of continuous, rather than specifics of equipment issues. The disruptive nature of continuous manufacturing represents either an opportunity or a threat for many companies, so the incentive to change equipment varies. Also, for many companies, the pharmaceutical sector is not actually the dominant sector in terms of sales. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Equipment and analytical companies meeting continuous challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

2015-03-01

This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white papers. In the equipment domain, this is equally prevalent among a broad range of companies, mainly focusing on discrete areas. As an example, the flow chemistry and secondary drug product communities are almost entirely disconnected. Control and Process Analytical Technologies (PAT) companies are active in both domains. The equipment actors are a very diverse group with a few major Original Equipment Manufacturers (OEM) players and a variety of SME, project providers, integrators, upstream downstream providers, and specialist PAT. In some cases, partnerships or alliances are formed to increase critical mass. This white paper has focused on small molecules; equipment associated with biopharmaceuticals is covered in a separate white paper. More specifics on equipment detail are provided in final dosage form and drug substance white papers. The equipment and analytical development from laboratory to pilot to production is important, with a variety of sensors and complexity reducing with scale. The importance of robust processing rather than overcomplex control strategy mitigation is important. A search of nonacademic literature highlights, with a few notable exceptions, a relative paucity of material. Much focuses on the economics and benefits of continuous, rather than specifics of equipment issues. The disruptive nature of continuous manufacturing represents either an opportunity or a threat for many companies, so the incentive to change equipment varies. Also, for many companies, the pharmaceutical sector is not actually the dominant sector in terms of sales. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

76 FR 64895 - Transportation and Related Equipment Technical Advisory Committee; Notice of Open Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... equipment or technology. Agenda 1. Welcome and Introductions. 2. Status Reports of Working Groups. 3. Public... presentation materials to Yvette Springer. For more information contact Ms. Springer on (202) 482-2813. Dated...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.6 - What are the minimum technical standards for enrolling and enabling Class II gaming system...

Code of Federal Regulations, 2010 CFR

2010-04-01

... and enabling Class II gaming system components? 547.6 Section 547.6 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.6 What are the minimum technical standards for enrolling and...

Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

ERIC Educational Resources Information Center

Huang, Hsun-I; Lee, Cheng-Fei

2012-01-01

Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

An image, looking east into Room 112A, filled with technical ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

An image, looking east into Room 112A, filled with technical equipment pertinent to the building's recent use - Department of Energy, Mound Facility, Electronics Laboratory Building (E Building), One Mound Road, Miamisburg, Montgomery County, OH

TRICARE program; clarification of benefit coverage of durable equipment and ordering or prescribing durable equipment; clarification of benefit coverage of assistive technology devises under the Extended Care Health Option Program. Final rule.

PubMed

2014-12-31

This final rule modifies the TRICARE regulation to add a definition of assistive technology (AT) devices for purposes of benefit coverage under the TRICARE Extended Care Health Option (ECHO) Program and to amend the definitions of durable equipment (DE) and durable medical equipment (DME) to better conform the language in the regulation to the statute. The final rule amends the language that specifically limits ordering or prescribing of DME to only a physician under the Basic Program, as this amendment will allow certain other TRICARE authorized individual professional providers, acting within the scope of their licensure, to order or prescribe DME. This final rule also incorporates a policy clarification relating to luxury, deluxe, or immaterial features of equipment or devices. That is, TRICARE cannot reimburse for the luxury, deluxe, or immaterial features of equipment or devices, but can reimburse for the base or basic equipment or device that meet the beneficiary's needs. Beneficiaries may choose to pay the provider for the luxury, deluxe, or immaterial features if they desire their equipment or device to have these "extra features."

Recovery of Navy distillate fuel from reclaimed product. Volume I. Technical discussion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brinkman, D.W.; Whisman, M.L.

1984-11-01

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). The first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in whichmore » experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 referenvces and abstracts. This appendix, because of its volume, has been published separately as Volume 2. 18 figures, 4 tables.« less

40 CFR 63.802 - Emission limits.

Code of Federal Regulations, 2014 CFR

2014-07-01

... meet the upholstered seating flammability requirements of California Technical Bulletin 116, 117, or... owner or operator must operate and maintain any affected source, including associated air pollution control equipment and monitoring equipment, in a manner consistent with safety and good air pollution...

40 CFR 63.802 - Emission limits.

Code of Federal Regulations, 2013 CFR

2013-07-01

... meet the upholstered seating flammability requirements of California Technical Bulletin 116, 117, or... owner or operator must operate and maintain any affected source, including associated air pollution control equipment and monitoring equipment, in a manner consistent with safety and good air pollution...

47 CFR 18.303 - Prohibited frequency bands.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Prohibited frequency bands. 18.303 Section 18.303 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Technical Standards § 18.303 Prohibited frequency bands. Operation of ISM equipment within the...

A Comparison of Certain Knowledges in Agriculture Needed by Workers in Farming, in Grain Elevator Businesses, and in Agricultural Equipment Businesses.

ERIC Educational Resources Information Center

Fiscus, Keith Eugene

Questionnaires to determine the vocational and technical education needed by prospective workers in farming and in grain elevator and agricultural equipment businesses were administered to 20 workers in each of the jobs of (1) farm manager, (2) grain elevator manager, operator, salesman, and deliveryman, and (3) agricultural equipment manager,…

Development, Implementation, and Analysis of Desktop-Scale Model Industrial Equipment and a Critical Thinking Rubric for Use in Chemical Engineering Education

ERIC Educational Resources Information Center

Golter, Paul B.

2011-01-01

In order to address some of the challenges facing engineering education, namely the demand that students be better prepared to practice professional as well as technical skills, we have developed an intervention consisting of equipment, assessments and a novel pedagogy. The equipment consists of desktop-scale replicas of common industrial…

Research on the EDM Technology for Micro-holes at Complex Spatial Locations

NASA Astrophysics Data System (ADS)

Y Liu, J.; Guo, J. M.; Sun, D. J.; Cai, Y. H.; Ding, L. T.; Jiang, H.

2017-12-01

For the demands on machining micro-holes at complex spatial location, several key technical problems are conquered such as micro-Electron Discharge Machining (micro-EDM) power supply system’s development, the host structure’s design and machining process technical. Through developing low-voltage power supply circuit, high-voltage circuit, micro and precision machining circuit and clearance detection system, the narrow pulse and high frequency six-axis EDM machining power supply system is developed to meet the demands on micro-hole discharging machining. With the method of combining the CAD structure design, CAE simulation analysis, modal test, ODS (Operational Deflection Shapes) test and theoretical analysis, the host construction and key axes of the machine tool are optimized to meet the position demands of the micro-holes. Through developing the special deionized water filtration system to make sure that the machining process is stable enough. To verify the machining equipment and processing technical developed in this paper through developing the micro-hole’s processing flow and test on the real machine tool. As shown in the final test results: the efficient micro-EDM machining pulse power supply system, machine tool host system, deionized filtration system and processing method developed in this paper meet the demands on machining micro-holes at complex spatial locations.

Congeneration feasibility: Otis Elevator Company and Polychrome Corporation. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, H.

1982-05-01

This report summarizes an investigation of the technical and economic feasibility of cogenerating electric and thermal power at two manufacturing plants (Otis Elevator Company and Polychrome Corporation) located on neighboring properties in Yonkers, NY. Existing electrical- and steam-producing equipment and energy consumption date are summarized. Alternative cases examined include electrical energy generation, electrical energy generation with waste heat recovery and a combined cycle case. Also reported are life cycle cost economic evaluations including simple payback period and return-on-investment indices. While it was concluded that cogeneration of heat and electricity at these industrial plant sites would not be economically viable, thismore » detailed study provides valuable insight into the types of problems encountered when considering cogeneration feasibility.« less

Scout fourth stage attitude and velocity control (AVC) system feasibility study

NASA Technical Reports Server (NTRS)

Byars, L. B.

1975-01-01

The feasibility of incorporating a guidance system in the Scout fourth stage to achieve a significant improvement in expected payload delivery accuracy is studied. The technical investigations included the determination of the AVC equipment performance requirements, establishment of qualification and acceptance test levels, generation of layouts illustrating design approaches for the upper D and payload transition sections to incorporate the hardware, and the preparation of a vendor bid package. Correction concepts, utilizing inertial velocity and attitude, were identified and evaluated. Fourth stage attitude adjustments as determined from inertial velocity variation through the first three stages and a final velocity correction based upon the measured in-plane component errors at injection were employed. Results show radical reductions in apogee-perigee deviations.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aristos Aristidou Natureworks); Robert Kean; Tom Schechinger

2007-10-01

The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed,more » which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest/storage/transportation equipment and the processor would build and operate the plant. Pilot fermentation studies demonstrated dramatic improvements in yields and rates with optimization of batch fermentor parameters. Demonstrated yields and rates are approaching those necessary for profitable commercial operation for production of ethanol or lactic acid. The ability of the biocatalyst to adapt to biomass hydrolysate (both biomass sugars and toxins in the hydrolysate) was demonstrated and points towards ultimate successful commercialization of the technology. However, some of this work will need to be repeated and possibly extended to adapt the final selected biocatalyst for the specific commercial hydrolysate composition. The path from corn stover in the farm field to final products, involves a number of steps. Each of these steps has options, problems, and uncertainties; thus creating a very complex multidimensional obstacle to successful commercial development. Through the tasks of this project, the technical and commercial uncertainties of many of these steps have been addressed; thus providing for a clearer understanding of paths forward and commercial viability of a corn stover-based biorefinery.« less

Glossary of Motion Picture Terminology.

ERIC Educational Resources Information Center

Jordan, Thurston C., Jr., Ed.

Over 500 terms used in the film industry are defined in non-technical language. The terms include both technical and common names for equipment, processes, occupations, and organizations. Some of the terms are illustrated with photographs. Cross Referencing is provided where appropriate. (JY)

Management methodology for pressure equipment

NASA Astrophysics Data System (ADS)

Bletchly, P. J.

Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

Dual-Shaft Electric Propulsion (DSEP) Technology Development Program

NASA Astrophysics Data System (ADS)

1992-08-01

The background, progress, and current state of the DOE-sponsored Advanced Dual-Shaft Electric Propulsion Technology Development are presented. Three electric-drive vehicles were build as conversions of a commercial gasoline-powered van, using program-designed components and systems as required. The vehicles were tested primarily on dynamometer or test tract. Component and system testing represented a major portion of the development effort. Test data are summarized in this report, and an Appendix contains the final component design specifications. This major programmatic concerns were the traction battery, the battery management system, the dc-to-ac inverter, the drive motor, the transaxle and its ancillary equipment, and the vehicle controller. Additional effort was devoted to vehicle-related equipment: gear selector, power steering, power brakes, accelerator, dashboard instrumentation, and heater. Design, development, and test activities are reported for each of these items, together with an appraisal (lessons learned) and recommendations for possible further work. Other programmatic results include a Cost and Commercialization Analysis, a Reliability and Hazards Analysis Study, Technical Recommendations for Next-Generation Development, and an assessment of overall program efforts.

Final Technical Report. Training in Building Audit Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brosemer, Kathleen

In 2011, the Tribe proposed and was awarded the Training in Building Audit Technologies grant from the DOE in the amount of $55,748 to contract for training programs for infrared cameras, blower door technology applications and building systems. The coursework consisted of; Infrared Camera Training: Level I - Thermal Imaging for Energy Audits; Blower Door Analysis and Building-As-A-System Training, Building Performance Institute (BPI) Building Analyst; Building Envelope Training, Building Performance Institute (BPI) Envelope Professional; and Audit/JobFLEX Tablet Software. Competitive procurement of the training contractor resulted in lower costs, allowing the Tribe to request and receive DOE approval to additionally purchasemore » energy audit equipment and contract for residential energy audits of 25 low-income Tribal Housing units. Sault Tribe personnel received field training to supplement the classroom instruction on proper use of the energy audit equipment. Field experience was provided through the second DOE energy audits grant, allowing Sault Tribe personnel to join the contractor, Building Science Academy, in conducting 25 residential energy audits of low-income Tribal Housing units.« less

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT... the application. (c) The full name and mailing address of the manufacturer of the device and/or applicant filing for the equipment authorization. (d) The FCC Identifier, trade name(s), and/or model number...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT... the application. (c) The full name and mailing address of the manufacturer of the device and/or applicant filing for the equipment authorization. (d) The FCC Identifier, trade name(s), and/or model number...

47 CFR 18.307 - Conduction limits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Conduction limits. 18.307 Section 18.307 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Technical... outside of the frequency bands specified in § 18.301. (f) For ultrasonic equipment, compliance with the...

New Technical Solution for Vertical Shaft Equipping Using Steel Headframe of Multifunction Purpose

NASA Astrophysics Data System (ADS)

Kassikhina, Elena; Pershin, Vladimir; Glazkov, Yurij

2017-11-01

The article reviews a novel approach to the design of steel angle headframe for vertical shafts of coal and ore mines on the basis of rational design solutions. Practice of construction of coal and ore mines provides application of various designs for steel angle headframes which are divided into separate large assembly blocks and constructive elements during assembling operations. Design of these blocks and elements, their weight and dimensions effect the chose of the method of assembling on which economic and technological indicators, as well as duration of down-time, depend on during performance of construction operations in shaft. The technical solution on equipment provision for mine vertical shaft using headframe of multifunctional purpose will allow changing the management construction of vertical shaft. The constructive design of the headgear allows application of the effective method of assembly and thus to provide improvement of the technical and economic indexes, and high calendar time rate of the shaft construction due to reduction of duration of works on equipment provision for the shaft and to refurbishment of the shaft in order to carry out horizontal mining.

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2014 CFR

2014-07-01

... How is the final performance report to be sent to the Defense Technical Information Center? (a... 32 National Defense 1 2014-07-01 2014-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of...

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2011 CFR

2011-07-01

... How is the final performance report to be sent to the Defense Technical Information Center? (a... 32 National Defense 1 2011-07-01 2011-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of...

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2013 CFR

2013-07-01

... How is the final performance report to be sent to the Defense Technical Information Center? (a... 32 National Defense 1 2013-07-01 2013-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of...

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of... How is the final performance report to be sent to the Defense Technical Information Center? (a...

District heating and cooling feasibility study, Dunkirk, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objective of this project is to perform a preliminary investigation of the technical and economic feasibility of implementing a district heating and cooling (DHC) system in the City of Dunkirk, New York. The study was conducted by first defining a heating and cooling (HC) load service area. Then, questionnaires were sent to prospective DHC customers. After reviewing the owners responses, large consumers of energy were interviewed for more detail of their HC systems, including site visits, to determine possibilities of retrofitting their systems to district heating and cooling. Peak HC loads for the buildings were estimated by Burns andmore » Roe's in-house computer programs. Based on the peak loads, certain customers were determined for suitability as anchor customers. Various options using cogeneration were investigated for possible HC sources. Equipment for HC sources and HC loads were sized and their associated costs estimated. Finally, economic analyses were performed. The conclusion is that it is technically and economically feasible to implement a district heating and cooling system in the City of Dunkirk. 14 figs., 15 tabs.« less

FY 1987 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, informationmore » gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.« less

47 CFR 5.3 - Scope of service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... conduct the following type of operations: (a) Experimentations in scientific or technical radio research... purposes. (c) Communications essential to a research project. (d) Technical demonstrations of equipment or techniques. (e) Field strength surveys by persons not eligible for authorization in any other service. (f...

47 CFR 5.3 - Scope of service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conduct the following type of operations: (a) Experimentations in scientific or technical radio research... purposes. (c) Communications essential to a research project. (d) Technical demonstrations of equipment or techniques. (e) Field strength surveys by persons not eligible for authorization in any other service. (f...

47 CFR 5.3 - Scope of service.

Code of Federal Regulations, 2012 CFR

2012-10-01

... conduct the following type of operations: (a) Experimentations in scientific or technical radio research... purposes. (c) Communications essential to a research project. (d) Technical demonstrations of equipment or techniques. (e) Field strength surveys by persons not eligible for authorization in any other service. (f...

Technical Publications

Science.gov Websites

peer-reviewed journal Conference reports Technical memos documenting equipment or other technology Science, HEP User Facility. Fermilab is managed by Fermi Research Alliance, LLC (FRA), acting under data, apparatus, product, or process disclosed, or represents that its use would not infringe privately

77 FR 24178 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

... and Introductions 2. Working Group Reports 3. Industry Presentation: E-beam Lithography 4. Industry Presentation: ENC Threshold for Satellite Modem 5. Industry Presentation: Semiconductor Manufacturing Equipment... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 811.107 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS COMPETITION AND... requests for proposals for technical medical and other technical equipment and devices issued by a field facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not...

Diagnostics of heavy mining equipment during the scheduled preventive maintenance

NASA Astrophysics Data System (ADS)

Drygin, M. Yu; Kuryshkin, N. P.

2018-01-01

Intensification of production, economic globalization and dramatic downgrade of the workers’ professional skills lead to unacceptable technical state of heavy mining equipment. Equipment maintenance outage reaches 84 % of the total downtime, of which emergency maintenance takes up to 36 % of time, that excesses 429 hours per year fr one excavator. It is shown that yearly diagnostics using methods of non-destructive check allows to reduce emergency downtime by 47 %, and 55 % of revealed defects can be eliminated without breaking the technological cycle of the equipment.

Evaluation of fuel equipment operability of diesel locomotive engine with use of infrared receivers

NASA Astrophysics Data System (ADS)

Ovcharenko, S. M.; Balagin, O. V.; Balagin, D. V.

2018-03-01

This paper provides results of modelling the heat liberation in high-pressure pipeline of fuel equipment of diesel locomotive engines. Functional relationships between the technical state of fuel equipment and temperature of the outer surface of the high-pressure fuel pipeline are presented using the example of diesel locomotive engine 1-PD4D. The paper shows results of operational tests of the developed method for control of fuel equipment operability of diesel locomotive.

Life sciences payload definition and integration study, task C and D. Volume 4: Preliminary equipment item specification catalog

NASA Technical Reports Server (NTRS)

1973-01-01

A specification catalog to define the equipment to be used for conducting life sciences experiments in a space laboratory is presented. The specification sheets list the purpose of the equipment item, and any specific technical requirements which can be identified. The status of similar hardware for ground use is stated with comments regarding modifications required to achieve spaceflight qualified hardware. Pertinent sketches, commercial catalog sheets, or drawings of the applicable equipment are included.

76 FR 50808 - Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-16

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Airborne Supplemental Navigation.... ACTION: Notice of intent to cancel Technical Standard Order (TSO)- C129a, Airborne Supplemental... notice announces the FAA's intent to cancel TSO-C129a, Airborne Supplemental Navigation Equipment Using...

Lennox - Student Training Equipment.

ERIC Educational Resources Information Center

Lennox Industries, Inc., Marshalltown, IA.

Presents a series of demonstration units designed by Lennox Industries for the purpose of training students to become familiar with Lennox mechanical equipment. Demonstrators are designed to present technical information in a clear simplified manner thus reducing frustration for the beginning trainee. The following demonstrators are available--(1)…

2 CFR Appendix B to Part 225 - Selected Items of Cost

Code of Federal Regulations, 2011 CFR

2011-01-01

... involved. Compensation surveys providing data representative of the labor market involved will be an...) “Special purpose equipment” means equipment which is used only for research, medical, scientific, or other... research, medical, scientific or other technical activities. Examples include office equipment and...

2 CFR Appendix B to Part 225 - Selected Items of Cost

Code of Federal Regulations, 2013 CFR

2013-01-01

... involved. Compensation surveys providing data representative of the labor market involved will be an...) “Special purpose equipment” means equipment which is used only for research, medical, scientific, or other... research, medical, scientific or other technical activities. Examples include office equipment and...

2 CFR Appendix B to Part 225 - Selected Items of Cost

Code of Federal Regulations, 2012 CFR

2012-01-01

... involved. Compensation surveys providing data representative of the labor market involved will be an...) “Special purpose equipment” means equipment which is used only for research, medical, scientific, or other... research, medical, scientific or other technical activities. Examples include office equipment and...

Occupational exposure of personnel operating military radio equipment: measurements and simulation.

PubMed

Paljanos, Annamaria; Miclaus, Simona; Munteanu, Calin

2015-09-01

Technical literature provides numerous studies concerning radiofrequency exposure measurements for various radio communication devices, but there are few studies related to exposure of personnel operating military radio equipment. In order to evaluate exposure and identify cases when safety requirements are not entirely met, both measurements and simulations are needed for accurate results. Moreover, given the technical characteristics of the radio devices used in the military, personnel mainly operate in the near-field region so both measurements and simulation becomes more complex. Measurements were made in situ using a broadband personal exposimeter equipped with two isotropic probes for both electric and magnetic components of the field. The experiment was designed for three different operating frequencies of the same radio equipment, while simulations were made in FEKO software using hybrid numerical methods to solve complex electromagnetic field problems. The paper aims to discuss the comparative results of the measurements and simulation, as well as comparing them to reference levels specified in military or civilian radiofrequency exposure standards.

Economic Viability of Brewery Spent Grain as a Biofuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, Charles

This report summarizes an investigation into the technical feasibility and economic viability of use grain wastes from the beer brewing process as fuel to generate the heat needed in subsequent brewing process. The study finds that while use of spent grain as a biofuel is technically feasible, the economics are not attractive. Economic viability is limited by the underuse of capital equipment. The investment in heating equipment requires a higher utilization that the client brewer currently anticipates. It may be possible in the future that changing factors may swing the decision to a more positive one.

78 FR 63161 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting ``Rescheduled'' The Sensors and Instrumentation... that affect the level of export controls applicable to sensors and instrumentation equipment and...

[A technical modification of the use of Dwyer's equipment].

PubMed

Carlioz, H; Damsin, J P

1991-01-01

Dwyer's technique for correction and anterior fusion of the spine was improved by using lockers at the level of each screw. So, like with the Zielke's technic this procedure allowed a global progressive and controllable correction and a real derotation of the spine.

Technical aspects of neurostimulation: Focus on equipment, electric field modeling, and stimulation protocols.

PubMed

Klooster, D C W; de Louw, A J A; Aldenkamp, A P; Besseling, R M H; Mestrom, R M C; Carrette, S; Zinger, S; Bergmans, J W M; Mess, W H; Vonck, K; Carrette, E; Breuer, L E M; Bernas, A; Tijhuis, A G; Boon, P

2016-06-01

Neuromodulation is a field of science, medicine, and bioengineering that encompasses implantable and non-implantable technologies for the purpose of improving quality of life and functioning of humans. Brain neuromodulation involves different neurostimulation techniques: transcranial magnetic stimulation (TMS), transcranial direct current stimulation (tDCS), vagus nerve stimulation (VNS), and deep brain stimulation (DBS), which are being used both to study their effects on cognitive brain functions and to treat neuropsychiatric disorders. The mechanisms of action of neurostimulation remain incompletely understood. Insight into the technical basis of neurostimulation might be a first step towards a more profound understanding of these mechanisms, which might lead to improved clinical outcome and therapeutic potential. This review provides an overview of the technical basis of neurostimulation focusing on the equipment, the present understanding of induced electric fields, and the stimulation protocols. The review is written from a technical perspective aimed at supporting the use of neurostimulation in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

U.S. DOE’s Energy Treasure Hunt Exchange In-Plant Trainings – DOE Resources, Early Results and Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nimbalkar, Sachin U.; Brockway, Walter F.; Lung, Bruce

The primary objective of the Department of Energy’s (DOE) Energy Treasure Hunt In-Plant Training (INPLT) is to train Better Plants partner employees to lead and conduct future energy efficiency Treasure Hunts within their facilities without DOE assistance. By taking a “learning-by-doing” approach, this INPLT, like other DOE INPLT trainings, has the added benefit of uncovering real energy and cost-saving opportunities. This INPLT leverages DOE and Better Plants technical staff, resources and tools and the EPA “Energy Treasure Hunt Guide: Simple Steps to Finding Energy Savings” process. While Treasure Hunts are a relatively well-known approach to identifying energy-savings in manufacturing plants,more » DOE is adding several additional elements in its Treasure Hunt Exchanges. The first element is technical assistance and methodology. DOE provides high-quality technical resources, such as energy efficiency calculators, fact sheets, source books etc., to facilitate the Treasure Hunt process and teaches four fundamentals: 1) how to profile equipment, 2) how to collect data, and 3), data & ROI calculation methodologies. Another element is the “train the trainer” approach wherein the training facilitator will train at least one partner employee to facilitate future treasure hunts. Another element is that DOE provides energy diagnostic equipment and teaches the participants how to use them. Finally, DOE also offers partners the opportunity to exchange teams of employees either within a partners’ enterprise or with other partners to conduct the treasure hunt in each other’s facilities. This exchange of teams is important because each team can bring different insights and uncover energy-saving opportunities that would otherwise be missed. This paper will discuss DOE methodology and the early results and lessons learned from DOE’S Energy Treasure Hunt In-Plant Trainings at Better Plants Partner facilities.« less

Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, K.

This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I&C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I&C system upgrades of present-day nuclear power plants, as well as I&C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current,more » analog-based I&C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in 1998, and should reflect any new qualification concerns, from the European perspective, with regard to the use of microprocessor-based safety systems in power plants.« less

76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

7 CFR 3430.55 - Technical reporting.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the Current Research Information System (CRIS). (b) Initial Documentation in the CRIS Database... identification of equipment purchased with any Federal funds under the award and any subsequent use of such equipment. (e) CRIS Web Site Via Internet. The CRIS database is available to the public on the worldwide web...

7 CFR 2812.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the donation of excess research equipment to educational institutions and non-profit organizations for the conduct of technical and scientific education and research activities as authorized by 15 U.S.C... DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE DONATION OF EXCESS RESEARCH EQUIPMENT UNDER 15 U.S.C. 3710(i...

7 CFR 2812.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the donation of excess research equipment to educational institutions and non-profit organizations for the conduct of technical and scientific education and research activities as authorized by 15 U.S.C... DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE DONATION OF EXCESS RESEARCH EQUIPMENT UNDER 15 U.S.C. 3710(i...

7 CFR 2812.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the donation of excess research equipment to educational institutions and non-profit organizations for the conduct of technical and scientific education and research activities as authorized by 15 U.S.C... DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE DONATION OF EXCESS RESEARCH EQUIPMENT UNDER 15 U.S.C. 3710(i...

7 CFR 2812.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the donation of excess research equipment to educational institutions and non-profit organizations for the conduct of technical and scientific education and research activities as authorized by 15 U.S.C... DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE DONATION OF EXCESS RESEARCH EQUIPMENT UNDER 15 U.S.C. 3710(i...

7 CFR 2812.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the donation of excess research equipment to educational institutions and non-profit organizations for the conduct of technical and scientific education and research activities as authorized by 15 U.S.C... DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE DONATION OF EXCESS RESEARCH EQUIPMENT UNDER 15 U.S.C. 3710(i...

Connecticut Biodiesel Power Generation Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grannis, Lee; York, Carla R.

Sabre will continue support of the emissions equipment and VARS issues to ensure all are resolved and the system is functioning as expected. The remote data collection to become more automated. Final project reports for data collection and system performance to be generated. Sabre continued to support the emissions equipment and VARS issues to ensure all are resolved and the system is functioning as expected. The remote data collection became more automated. Final project reports for data collection and system performance were generated and are part of this final report. Some Systems Sensors were replaced due to a lightning strike.more » Sample data charts are shown at the end of the report. During the project, Sabre Engineering provided support to the project team with regarding to troubleshooting technical issues and system integration with the local power utility company. The resulting lessons learned through Sabre’s participation in the project have been valuable to the integrity of the data collected as well as in providing BioPur Light & Power valuable insights into future operations and planning for possible expansion. The system monitoring and data collection system has been operating as designed and continues to provide relevant information to the system operators. The information routinely gathered automatically by the system also contributes to the REN and REC validations which are required to secure credit for these items. During the quarter, the remaining work on the operations and safety manual were completed and released for publication after screen shots were verified. The goal of this effort to provide an accurate set of precautions and procedures for the technology system that can be replicated to other similar system.« less

Energy use pattern in rice milling industries-a critical appraisal.

PubMed

Goyal, S K; Jogdand, S V; Agrawal, A K

2014-11-01

Rice milling industry is one of the most energy consuming industries. Like capital, labour and material, energy is one of the production factors which used to produce final product. In economical term, energy is demand-derived goods and can be regarded as intermediate good whose demand depends on the demand of final product. This paper deals with various types of energy pattern used in rice milling industries viz., thermal energy, mechanical energy, electrical energy and human energy. The important utilities in a rice mill are water, air, steam, electricity and labour. In a rice mill some of the operations are done manually namely, cleaning, sun drying, feeding paddy to the bucket elevators, weighing and packaging, etc. So the man-hours are also included in energy accounting. Water is used for soaking and steam generation. Electricity is the main energy source for these rice mills and is imported form the state electricity board grids. Electricity is used to run motors, pumps, blowers, conveyors, fans, lights, etc. The variations in the consumption rate of energy through the use of utilities during processing must also accounted for final cost of the finished product. The paddy milling consumes significant quantity of fuels and electricity. The major energy consuming equipments in the rice milling units are; boilers and steam distribution, blowers, pumps, conveyers, elevators, motors, transmission systems, weighing, etc. Though, wide variety of technologies has been evolved for efficient use of energy for various equipments of rice mills, so far, only a few have improved their energy efficiency levels. Most of the rice mills use old and locally available technologies and are also completely dependent on locally available technical personnel.

Minnesota Deaf-Blind Technical Assistance Project. Final Report.

ERIC Educational Resources Information Center

Kloos, Eric

This final report describes activities and accomplishments of the 3-year federally supported Minnesota Deaf-Blind Technical Assistance Project. The project provided training and technical assistance, information sharing, and support services to families of children with deaf-blindness. Activities and accomplishments included: collaboration with…

75 FR 56857 - Pilot, Flight Instructor, and Pilot School Certification

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... of part 141. Discussion of Technical Amendment Section 141.5(d) establishes the quality of training... Certification AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule; technical amendment. SUMMARY: The Federal Aviation Administration (FAA) is making minor technical changes to a final rule published...

33 CFR 157.12d - Technical specifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Design, Equipment, and Installation § 157.12d Technical specifications. (a) Oil discharge monitoring and... effectively under all environmental conditions normally encountered by oil tankers, and must be designed and... must be designed so a discharge of dirty-ballast or other oil-contaminated water from the cargo tank...

33 CFR 157.12d - Technical specifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Design, Equipment, and Installation § 157.12d Technical specifications. (a) Oil discharge monitoring and... effectively under all environmental conditions normally encountered by oil tankers, and must be designed and... must be designed so a discharge of dirty-ballast or other oil-contaminated water from the cargo tank...

USSR Report Engineering and Equipment.

DTIC Science & Technology

1987-05-04

Korenev , et al. ; ENERGETICHESKOYE STROITELSTVO, No 7, Jul 86) 33 Improving Fire Protection of Cables in Electric Power Plants (S.Ye. Korshunov...Russian No 7, Jul 86 pp 32-33 {Article by V.D. Likhachev, candidate of technical sciences, K.I. Korenev , candidate of technical sciences, K.I. Chikvaidze

7 CFR 1709.123 - Evaluation criteria and weights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... design and technical merit criteria shall not be less than 65 percent of the total available points, and... announcement. (b) Project design and technical merit. In reviewing the grant proposal's project design and... the proposed design, construction, equipment and materials for the proposed energy facilities to...

Advanced missions safety. Volume 2: Technical discussion, Part 2: Experiment safety, guidelines

NASA Technical Reports Server (NTRS)

Hinton, M. G., Jr.

1972-01-01

A technical analysis of a portion of the advanced missions safety study is presented. The potential hazards introduced when experimental equipment is carried aboard the Earth Orbit Shuttle are identified. Safety guidelines and requirements for eliminating or reducing these hazards are recommended.

41 CFR 109-50.205 - Procedure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... DISPOSAL AUTHORITIES 50.2-Math and Science Equipment Gift Program § 109-50.205 Procedure. (a) The DOE... math and science projects where the equipment would further enhance the progress of the project. (e... will be used to improve math and science curricula or in the conduct of technical and scientific...

41 CFR 109-50.205 - Procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... DISPOSAL AUTHORITIES 50.2-Math and Science Equipment Gift Program § 109-50.205 Procedure. (a) The DOE... math and science projects where the equipment would further enhance the progress of the project. (e... will be used to improve math and science curricula or in the conduct of technical and scientific...

41 CFR 109-50.205 - Procedure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... DISPOSAL AUTHORITIES 50.2-Math and Science Equipment Gift Program § 109-50.205 Procedure. (a) The DOE... math and science projects where the equipment would further enhance the progress of the project. (e... will be used to improve math and science curricula or in the conduct of technical and scientific...

41 CFR 109-50.205 - Procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... DISPOSAL AUTHORITIES 50.2-Math and Science Equipment Gift Program § 109-50.205 Procedure. (a) The DOE... math and science projects where the equipment would further enhance the progress of the project. (e... will be used to improve math and science curricula or in the conduct of technical and scientific...

41 CFR 109-50.205 - Procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... DISPOSAL AUTHORITIES 50.2-Math and Science Equipment Gift Program § 109-50.205 Procedure. (a) The DOE... math and science projects where the equipment would further enhance the progress of the project. (e... will be used to improve math and science curricula or in the conduct of technical and scientific...

Development of an approach to facilitate optimal equipment replacement : technical summary.

DOT National Transportation Integrated Search

1999-10-01

The objective of the study was to determine a way or ways to assign an urgency rating to equipment that was currently in service but in need of replacement. This urgency rating must in some manner took into account the various costs associated with r...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

Heavy Construction Equipment Mechanic; A Suggested Guide for a Training Course.

ERIC Educational Resources Information Center

Division of Manpower Development and Training. , BAVT.

Prepared by a technical writer for the Division of Manpower Development and Training, this guide is intended to aid instructors, supervisors, and administrators of vocational education and manpower training programs in establishing training programs for mechanics and technicians entering the occupation of servicing heavy construction equipment.…

33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

Code of Federal Regulations, 2010 CFR

2010-07-01

...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities, including professional certifications and organizational memberships of the nominee or the primary staff to..., appropriate technology such as computer modeling programs and hardware or testing materials and equipment; (8...

78 FR 41039 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-09

... under Consideration for Purchase: follow-on equipment and support for Finland's F-18 Mid-Life Upgrade..., publications and technical documentation, personnel training and training equipment, U.S. Government and...) Military Department: Navy (GAU) (v) Prior Related Cases: FMS case SAA--$2.4 billion--9Jun92 FMS case SAB...

Non-standard equipment for construction of vertical shafts

NASA Astrophysics Data System (ADS)

Yagodkin, F. I.; Prokopov, A. Y.; Pleshko, M. S.; Pankratenko, A. N.

2017-10-01

The article deals with the modern problems of construction and reconstruction of vertical shafts of mines, which require innovative technical solutions in the mechanization of mining operations. The examples developed by the authors of the original equipment and technologies, are successfully implemented for the mining industry in Russia.

Educational Telecommunications Alternatives for Alaska. Product 1.

ERIC Educational Resources Information Center

Wilke, Jennifer L.; And Others

This study explores a wide variety of technical alternatives, from equipment needs and on-the-ground system design, to equipment operation and suggested applications for department activities, both now and in the future. Some suggested alternatives include (1) communication satellites, (2) one way audio transmission, (3) one and two way hard copy…

Interventional Radiologists: a Necessary Evaluation of Technical, Protective and Technological Operation.

PubMed

Rahimi, Sayed Ali; Pourkaveh, Maryam

2016-02-01

To present the results of occupational radiation doses investigated through a Hospitals of Mazandaran Medical Science Universities in north of Iran. Radiology unit has an important role in diagnosis of many disorders with providing suitable and high quality pictures. A good picture was provided using correct technical criteria and suitable circumstance of patient. Finally, operation and knowledge of radiology personnel directly has a primary role in determining quality of radiography. This study was done in order to determine personnel operation in the units of hospitals radiologist related to University of Mazandaran Medical Science. Data collection tools are made of a researcher check list that was used after obtaining suitable letter and validity indexes. All of the 73 personnel of radiology unit related to Mazandaran Medical Science were studied. 35 operations (in technical, protective and technological fields) of any personnel, in three distinct shifts were observed and recorded. All of them were tested regarding these three fields with a total of 40 questions. The total scores received from personnel in technical part in the morning, evening and night shift were 66.4, 53.9 and 60.2 percent respectively. Received scores from personnel in the protective fields were 68.1, 59.5 and 60.2 percent. Moreover, received scores from personnel in the technological operation fields were 47.8, 39.95 and 43.65 percent respectively. Comparison of these three scores in technical, protective and technological operation fields showed a meaningful difference (p<0.05). The overall quality of personnel operations were nearly desirable and in need of continuous education, supervision and evaluation. Emphasizing protection to beams, accessibility of necessary tools, continuous supervision regarding the usage of these equipments and respecting the other security points have an important role in decreasing patients absorbed doses.

Problematics of different technical maintenance for computers

NASA Technical Reports Server (NTRS)

Dostalek, Z.

1977-01-01

Two modes of operations are used in the technical maintenance of computers: servicing provided by the equipment supplier, and that done by specially trained computer users. The advantages and disadvantages of both modes are discussed. Maintenance downtime is tabulated for two computers serviced by user employees over an eight year period.

33 CFR 157.12d - Technical specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pipe runs full of liquid at all times during the discharge of the effluent. Sampling probes must... line as appropriate, so as to be always filled with the liquid being discharged. (2) A flow meter must... Design, Equipment, and Installation § 157.12d Technical specifications. (a) Oil discharge monitoring and...

33 CFR 157.12d - Technical specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... pipe runs full of liquid at all times during the discharge of the effluent. Sampling probes must... line as appropriate, so as to be always filled with the liquid being discharged. (2) A flow meter must... Design, Equipment, and Installation § 157.12d Technical specifications. (a) Oil discharge monitoring and...

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2011 CFR

2011-07-01

... is manufactured. (4) An e-mail address and phone number to contact for further information, or a Web... secondary engine manufacturers. (l) [Reserved] (m) Additional exemptions for technical or engineering... avoided with reasonable discretion have resulted in technical or engineering problems that prevent you...

Comprehensive Learning Centers: Using Technology To Supplement the Classroom.

ERIC Educational Resources Information Center

Groomes, M. Rudy

Orangeburg-Calhoun Technical College (OCTC) is a public two-year technical college located in rural South Carolina. Some prominent examples of the use of technology at OCTC include the following: (1) the Health Sciences Satellite Media Center houses software and audiovisual equipment which provides instructional support to seven health science…

Food Service Technical Terms. English-Spanish Lexicon.

ERIC Educational Resources Information Center

Shin, Masako T.

This English-Spanish lexicon presents food service technical terms. The terms are divided into seven categories: basic food items, common baking terms, food cutting terms, general cooking terms, non-English culinary terms, and tools and equipment. Each English word or term is followed by its Spanish equivalent(s). (YLB)

76 FR 18127 - Energy Conservation Standards for Metal Halide Lamp Fixtures: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... for this equipment. DOE encourages written comments on these subjects. To inform interested parties...

77 FR 43015 - Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... Motors: Public Meeting and Availability of the Preliminary Technical Support Document AGENCY: Office of... availability of preliminary technical support document. SUMMARY: The U.S. Department of Energy (DOE or... consider for this equipment. DOE also encourages interested parties to submit written comments on these...

75 FR 17080 - Energy Conservation Standards for Walk-in Coolers and Walk-in Freezers: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... consider for this equipment. In addition, DOE encourages written comments on these subjects. To inform...

Low-Tech Education Threatens the High-Tech Future.

ERIC Educational Resources Information Center

Business Week, 1983

1983-01-01

Indicating that the quality of scientific/technical education in the United States has been slipping since the brief surge of attention in the decade following Sputnik, discusses the need for upgrading science/technical education. Includes efforts currently under way, including financial support by industry and donations of equipment and computers…

Teaching Graduate Business Students to Write Clearly about Technical Topics

ERIC Educational Resources Information Center

Dyrud, Marilyn A.; Worley, Rebecca B.; Jameson, Daphne

2006-01-01

Graduate programs in business emphasize technical analysis in finance, accounting, marketing, and other core courses. Important business decisions--what market to target, which products to offer, how to finance an acquisition, whether to lease or buy equipment--require mathematical and statistical problem solving. Management communication courses…

[System of technical facilities for equipping the anesthesiologist's work place in the operating room].

PubMed

Burlakov, R I; Iurevich, V M

1981-01-01

The authors proved the advisability of complex technical provision for certain functional cycles, or parts of medical technological process. The example given is a modification of working place for anesthesiologist at the operating theatre. Principle and additional devices included in the complex are specified.

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2013 CFR

2013-04-01

... data communications between system components? 547.15 Section 547.15 Indians NATIONAL INDIAN GAMING... AND EQUIPMENT § 547.15 What are the minimum technical standards for electronic data communications between system components? (a) Sensitive data. Communication of sensitive data must be secure from...

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2014 CFR

2014-04-01

... data communications between system components? 547.15 Section 547.15 Indians NATIONAL INDIAN GAMING... AND EQUIPMENT § 547.15 What are the minimum technical standards for electronic data communications between system components? (a) Sensitive data. Communication of sensitive data must be secure from...

IMIS: Integrated Maintenance Information System. A maintenance information delivery concept

NASA Technical Reports Server (NTRS)

Vonholle, Joseph C.

1987-01-01

The Integrated Maintenance Information System (IMIS) will optimize the use of available manpower, enhance technical performance, improve training, and reduce the support equipment and documentation needed for deployment. It will serve as the technician's single, integrated source of all the technical information required to perform modern aircraft maintenance.

A Portable Presentation Package for Audio-Visual Instruction. Technical Documentary Report.

ERIC Educational Resources Information Center

Smith, Edgar A.; And Others

The Portable Presentation Package is a prototype of an audiovisual equipment package designed to facilitate technical training in remote areas, situations in which written communications are difficult, or in situations requiring rapid presentation of instructional material. The major criteria employed in developing the package were (1) that the…

Surface hardening of cutting elements agricultural machinery vibro arc plasma

NASA Astrophysics Data System (ADS)

Sharifullin, S. N.; Adigamov, N. R.; Adigamov, N. N.; Solovev, R. Y.; Arakcheeva, K. S.

2016-01-01

At present, the state technical policy aimed at the modernization of worn equipment, including agriculture, based on the use of high-performance technology called nanotechnology. By upgrading worn-out equipment meant restoring it with the achievement of the above parameters passport. The existing traditional technologies are not suitable for the repair of worn-out equipment modernization. This is especially true of imported equipment. Out here alone - is the use of high-performance technologies. In this paper, we consider the use of vibro arc plasma for surface hardening of cutting elements of agricultural machinery.

Research on large equipment maintenance system in life cycle

NASA Astrophysics Data System (ADS)

Xu, Xiaowei; Wang, Hongxia; Liu, Zhenxing; Zhang, Nan

2017-06-01

In order to change the current disadvantages of traditional large equipment maintenance concept, this article plans to apply the technical method of prognostics and health management to optimize equipment maintenance strategy and develop large equipment maintenance system. Combined with the maintenance procedures of various phases in life cycle, it concluded the formulation methods of maintenance program and implement plans of maintenance work. In the meantime, it takes account into the example of the dredger power system of the Waterway Bureau to establish the auxiliary platform of ship maintenance system in life cycle.

Bridging the engineering gap: integrated systems thinking

NASA Astrophysics Data System (ADS)

Weintré, J. R.; Delfi, M.

2017-09-01

On visits to rural Indonesia it is apparent that the advances made possible by technical engineered solutions, are rarely at the same pace as the human captivation of technical development. This uneven pace has limited the application of labour-saving equipment and efficiency. It is suggested to be of primary importance to advance technical application skills among communities as part of the continuous advancement cycle in our human environment. A creative approach to inclusive technology and internal transfer of equipment knowledge in society, reduces barriers and could diminish structural or societal undesired situations. Earlier theoretical concepts provide us a lens for describing the practices of habitus, conceptualization of social capital and integrated systems thinking. The interrelationship and complexities in technical and social systems requires to be investigated. This paper aims to describe those, combined with technological applications in an empirical ethnographic approach. The study analyses the negotiations of community members with the available technology. It intends to foster a better understanding of the various cultural-economic values by exploring the systems thinking theory, with a focus on rice cultivation in Indonesia, Japan and Australia. This research suggests that cultural, economic and technical advances vary considerably and human expectations are strongly influenced by local culture.

Equipment for nuclear medical centers, production capabilities of Rosatom enterprises

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gavrish, Yu. N., E-mail: gavrish@luts.niiefa.spb.su; Koloskov, S. A.; Smirnov, V. P.

2015-12-15

Analysis of the capabilities of the State Corporation Rosatom enterprises on the development and production of diagnostic and therapeutic equipment for nuclear medicine centers is presented. Prospects of the development of accelerator equipment for the production of a wide range of radioisotope products are shown, and the trends of its development are determined. A comparative analysis of the technical parameters of domestic tomographs and devices for brachytherapy with foreign counterparts is given.

Lake Charles CCS Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leib, Thomas; Cole, Dan

In late September 2014 development of the Lake Charles Clean Energy (LCCE) Plant was abandoned resulting in termination of Lake Charles Carbon Capture and Sequestration (CCS) Project which was a subset the LCCE Plant. As a result, the project was only funded through Phase 2A (Design) and did not enter Phase 2B (Construction) or Phase 2C (Operations). This report was prepared relying on information prepared and provided by engineering companies which were engaged by Leucadia Energy, LLC to prepare or review Front End Engineering and Design (FEED) for the Lake Charles Clean Energy Project, which includes the Carbon Capture andmore » Sequestration (CCS) Project in Lake Charles, Louisiana. The Lake Charles Carbon Capture and Sequestration (CCS) Project was to be a large-scale industrial CCS project intended to demonstrate advanced technologies that capture and sequester carbon dioxide (CO 2) emissions from industrial sources into underground formations. The Scope of work was divided into two discrete sections; 1) Capture and Compression prepared by the Recipient Leucadia Energy, LLC, and 2) Transport and Sequestration prepared by sub-Recipient Denbury Onshore, LLC. Capture and Compression-The Lake Charles CCS Project Final Technical Report describes the systems and equipment that would be necessary to capture CO 2 generated in a large industrial gasification process and sequester the CO 2 into underground formations. The purpose of each system is defined along with a description of its equipment and operation. Criteria for selection of major equipment are provided and ancillary utilities necessary for safe and reliable operation in compliance with environmental regulations are described. Construction considerations are described including a general arrangement of the CCS process units within the overall gasification project. A cost estimate is provided, delineated by system area with cost breakdown showing equipment, piping and materials, construction labor, engineering, and other costs. The CCS Project Final Technical Report is based on a Front End Engineering and Design (FEED) study prepared by SK E&C, completed in [June] 2014. Subsequently, Fluor Enterprises completed a FEED validation study in mid-September 2014. The design analyses indicated that the FEED package was sufficient and as expected. However, Fluor considered the construction risk based on a stick-build approach to be unacceptable, but construction risk would be substantially mitigated through utilization of modular construction where site labor and schedule uncertainty is minimized. Fluor’s estimate of the overall EPC project cost utilizing the revised construction plan was comparable to SKE&C’s value after reflecting Fluor’s assessment of project scope and risk characteristic. Development was halted upon conclusion of Phase 2A FEED and the project was not constructed.Transport and Sequestration – The overall objective of the pipeline project was to construct a pipeline to transport captured CO 2 from the Lake Charles Clean Energy project to the existing Denbury Green Line and then to the Hastings Field in Southeast Texas to demonstrate effective geologic sequestration of captured CO 2 through commercial EOR operations. The overall objective of the MVA portion of the project was to demonstrate effective geologic sequestration of captured CO 2 through commercial Enhanced Oil Recovery (EOR) operations in order to evaluate costs, operational processes and technical performance. The DOE target for the project was to capture and implement a research MVA program to demonstrate the sequestration through EOR of approximately one million tons of CO 2 per year as an integral component of commercial operations.« less

Evaluating alternative service contracts for medical equipment.

PubMed

De Vivo, L; Derrico, P; Tomaiuolo, D; Capussotto, C; Reali, A

2004-01-01

Managing medical equipments is a formidable task that has to be pursued maximizing the benefits within a highly regulated and cost-constrained environment. Clinical engineers are uniquely equipped to determine which policies are the most efficacious and cost effective for a health care institution to ensure that medical devices meet appropriate standards of safety, quality and performance. Part of this support is a strategy for preventive and corrective maintenance. This paper describes an alternative scheme of OEM (Original Equipment Manufacturer) service contract for medical equipment that combines manufacturers' technical support and in-house maintenance. An efficient and efficacious organization can reduce the high cost of medical equipment maintenance while raising reliability and quality. Methodology and results are discussed.

Definition of common support equipment and space station interface requirements for IOC model technology experiments

NASA Technical Reports Server (NTRS)

Russell, Richard A.; Waiss, Richard D.

1988-01-01

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

A method and technical equipment for an acute human trial to evaluate retinal implant technology

NASA Astrophysics Data System (ADS)

Hornig, Ralf; Laube, Thomas; Walter, Peter; Velikay-Parel, Michaela; Bornfeld, Norbert; Feucht, Matthias; Akguel, Harun; Rössler, Gernot; Alteheld, Nils; Lütke Notarp, Dietmar; Wyatt, John; Richard, Gisbert

2005-03-01

This paper reports on methods and technical equipment to investigate the epiretinal stimulation of the retina in blind human subjects in acute trials. Current is applied to the retina through a thin, flexible microcontact film (microelectrode array) with electrode diameters ranging from 50 to 360 µm. The film is mounted in a custom-designed surgical tool that is hand-held by the surgeon during stimulation. The eventual goal of the work is the development of a chronically implantable retinal prosthesis to restore a useful level of vision to patients who are blind with outer retinal degenerations, specifically retinitis pigmentosa and macular degeneration.

Technical information report: Plasma melter operation, reliability, and maintenance analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendrickson, D.W.

1995-03-14

This document provides a technical report of operability, reliability, and maintenance of a plasma melter for low-level waste vitrification, in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. A process description is provided that minimizes maintenance and downtime and includes material and energy balances, equipment sizes and arrangement, startup/operation/maintence/shutdown cycle descriptions, and basis for scale-up to a 200 metric ton/day production facility. Operational requirements are provided including utilities, feeds, labor, and maintenance. Equipment reliability estimates and maintenance requirements are provided which includes a list of failure modes, responses, and consequences.

Assembling of Steel Angle Headframe of Multifunctional Purpose

NASA Astrophysics Data System (ADS)

Kassikhina, E. G.; Pershin, V. V.; Volkov, V. M.

2017-10-01

The article reviews new technical solution on equipment provision of vertical shaft utilizing steel headframe of multifunctional purpose. Practice of construction of coal and ore mines provides application of various designs for steel angle headframes which are divided into separate large assembly blocks and constructive elements during assembling operations. Design of these blocks and elements, their weight and dimensions effect the chose of the method of assembling on which economic and technological indicators, as well as duration of down-time, depend on during performance of construction operations in shaft. The technical solution on equipment provision for mine vertical shaft using headframe of multifunctional purpose will allow changing the management construction of vertical shaft. The proposed headframe combines the functions of sinking and operation that eliminates costs for assembling/dissembling of temporary headgear. The constructive design of the headgear allows application of the effective method of assembly and thus to provide improvement of the technical and economic indexes, and high calendar time rate of the shaft construction due to reduction of duration of works on equipment provision for the shaft and to refurbishment of the shaft in order to carry out horizontal mining.

Technical problems of wastewater treatment plant in crude palm oil industry A case study in PT Socfin Indonesia-Kebun Sungai Liput, Nang groe Aceh Darussalam Province

NASA Astrophysics Data System (ADS)

Paramitadevi, Y. V.; Rahmatullah

2017-05-01

Crude palm oil produced in Indonesia has already been known as the largest in the world. Unfortunately many of palm oil factories (CPOF) spread out in Indonesia have not good wastewater treatments (WWTP) yet. PT Socfin Indonesia, as an example, which is located in Aceh Tamiang Regency, still has BOD contained in its final effluent of the waswater treatment plant more than 150 ppm. In fact, the capability and capacity of WWTP in PT Socfin are 192 m3per day. Because of improper operational and maintenance of the WWTP, the technical prob lem are accumulated, such as, increasing the deposition of sludge and decreasing the retention time. The following affect is the treatment process is not going well and the quality of effluent is getting worse. The objective of this paper is to solve the technical problems by means remov ing the deposition of sludge periodically and fixing floating aeration in the aerobic pond. Method using for this paper is survey and wastewater sampling. A recommendation of the was tewater treatment system has been proposed after average BOD from WWTP outlet is defined 158 mg/L. The recommendation has seven procesess including oil separation, neutralization, closed tank anaerobic digester equipped with gas holder, extended aeration, settling tank, sand drying bed and land application.

An on-line monitoring system for navigation equipment

NASA Astrophysics Data System (ADS)

Wang, Bo; Yang, Ping; Liu, Jing; Yang, Zhengbo; Liang, Fei

2017-10-01

Civil air navigation equipment is the most important infrastructure of Civil Aviation, which is closely related to flight safety. In addition to regular flight inspection, navigation equipment's patrol measuring, maintenance measuring, running measuring under special weather conditions are the important means of ensuring aviation flight safety. According to the safety maintenance requirements of Civil Aviation Air Traffic Control navigation equipment, this paper developed one on-line monitoring system with independent intellectual property rights for navigation equipment, the system breakthroughs the key technologies of measuring navigation equipment on-line including Instrument Landing System (ILS) and VHF Omni-directional Range (VOR), which also meets the requirements of navigation equipment ground measurement set by the ICAO DOC 8071, it provides technical means of the ground on-line measurement for navigation equipment, improves the safety of navigation equipment operation, and reduces the impact of measuring navigation equipment on airport operation.

LabVIEW-based control and data acquisition system for cathodoluminescence experiments.

PubMed

Bok, J; Schauer, P

2011-11-01

Computer automation of cathodoluminescence (CL) experiments using equipment developed in our laboratory is described. The equipment provides various experiments for CL efficiency, CL spectra, and CL time response studies. The automation was realized utilizing the graphical programming environment LabVIEW. The developed application software with procedures for equipment control and data acquisition during various CL experiments is presented. As the measured CL data are distorted by technical limitations of the equipment, such as equipment spectral sensitivity and time response, data correction algorithms were incorporated into the procedures. Some examples of measured data corrections are presented. © 2011 American Institute of Physics

The role of engineering in the flight equipment purchasing process

NASA Technical Reports Server (NTRS)

1977-01-01

The role of the airline engineering department in the flight equipment acquisition process is examined. The data for the study was collected from six airlines. The principal findings of the study include: (1) engineering activities permeate, but do not dominate the airline flight equipment decision process. (2) The principal criterion for the flight equipment acquisition decision is return on investment. (3) The principal sources of information for the airline engineering departments in the monitoring process are the manufacturers of equipment. Subsidiary information sources include NASA publications and conferences, among others and (4) The engineering department is the principal communication channel for technical information.

X-Ray Equipment and Protective Devices of Dental Assistant Programs in Pennsylvania Vocational Technical Schools. Vocational-Technical Education Research Report, Health Occupations, Monograph No. 7, Vol. 16, No. 1.

ERIC Educational Resources Information Center

Hominsky, Dolores J.; Hole, F. Marvin

Objectives of a Pennsylvania study were (1) to investigate the ways in which the vocational technical schools of the state have met the recommendations of the Pennsylvania Department of Environmental Resources for classroom structural design and dental x-ray machines in dental assistant training programs and (2) to collect data on the methods by…

Feasibility of mining lunar resources for earth use: Circa 2000 AD. Volume 2: Technical discussion

NASA Technical Reports Server (NTRS)

Nishioka, K.; Arno, R. D.; Alexander, A. D.; Slye, R. E.

1973-01-01

The technologies and systems required to establish the mining base, mine, refine, and return lunar resources to earth are discussed. Gross equipment requirements, their weights and costs are estimated and documented. The operational requirements are analyzed and tabulated. Diagrams of equipment and processing facilities are provided.

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 12th Street, SW., Washington, DC (Reference Information Center), call 1-888-225-5322 or at the National... de Varembe, CH-1211 Geneva 20, Switzerland, or from the American National Standards Institute (ANSI... qualified person in the business of installing marine communications equipment on board vessels. In no event...

33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

Code of Federal Regulations, 2011 CFR

2011-07-01

... be associated with its duties for the specific project; (7) In-house availability of, or access to, appropriate technology such as computer modeling programs and hardware or testing materials and equipment; (8...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities...

78 FR 44191 - Agency Information Collection (Service Data Manual) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... technical medical equipment and devices, or mechanical equipment are provided to VA. This clause sets forth... U.S.C. 3501-3521), this notice announces that the Office of Acquisition and Materiel Management... Management and Budget (OMB) for review and comment. The PRA submission describes the nature of the...

High-Priority Equipment Needs for Instruction at Postsecondary Institutions in New York State. A Report.

ERIC Educational Resources Information Center

Diamond, Celia B.

Acquisition and maintenance of instructional equipment by colleges and universities in New York State, problems encountered, and possible solutions were assessed through a fall 1986 survey of public and private colleges. The study population consisted of colleges offering scientific and technical instruction in 1985-1986. Responses were received…

Early Fuel Cell Market Demonstrations | Hydrogen and Fuel Cells | NREL

Science.gov Websites

Handling Equipment Data Collection and Analysis: 2015 Report, DOE Hydrogen and Fuel Cells Program Annual Progress Report (December 2015) Material Handling Equipment Data Collection and Analysis: 2015 Review, DOE Technical Report (March 2015) 2014 Forklift and Backup Power Data Collection and Analysis: 2014 Report, DOE

Network Performance and Coordination in the Health, Education, Telecommunications System. Satellite Technology Demonstration, Technical Report No. 0422.

ERIC Educational Resources Information Center

Braunstein, Jean; Janky, James M.

This paper describes the network coordination for the Health, Education, Telecommunications (HET) system. Specifically, it discusses HET network performance as a function of a specially-developed coordination system which was designed to link terrestrial equipment to satellite operations centers. Because all procedures and equipment developed for…

Military Curricula for Vocational & Technical Education. Telephone Equipment Installer-Repairman, 5-4.

ERIC Educational Resources Information Center

Bureau of Occupational and Adult Education (DHEW/OE), Washington, DC.

These individualized, self-paced student texts and workbooks for a secondary-postsecondary-level course in telephone equipment installation and repair is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Purpose stated for the course is to…

33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

Code of Federal Regulations, 2012 CFR

2012-07-01

... be associated with its duties for the specific project; (7) In-house availability of, or access to, appropriate technology such as computer modeling programs and hardware or testing materials and equipment; (8...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities...

Industrial Equipment Maintenance. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains 10 units that provide the basic curriculum components required to develop lesson plans for the industrial equipment maintenance curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and…

77 FR 30512 - Native American Career and Technical Education Program; Final Waivers and Extension of Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Final Waivers and... American Career and Technical Education Program Catalog of Federal Domestic Assistance (CFDA) Number: 84.101A. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career...

48 CFR 1852.235-73 - Final Scientific and Technical Reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Final Scientific and Technical Reports. 1852.235-73 Section 1852.235-73 Federal Acquisition Regulations System NATIONAL..., including recommendations and conclusions based on the experience and results obtained. The final report...

Coosa River Storage Annex, Talladega, Alabama Environmental Investigation, Final Management and Resources Utilization Plan

DTIC Science & Technology

1991-02-01

to adequately assess the health and environmental risks associated with the closure and transfer of the Annex forI other use; and 3) identification of...1990); Draft Final Technical Plan, Draft Final Sampling Design Plan and Draft Final Health and Safety Plan, USATHAMA, June 1990. 2.1.2 Draft Final...Final Technical Plan, Sampling Design Plan and Health and Safety Plan) supplied by USATHAMA. The estimate may be revised, with USATHAMA approval, as

Up-to-date state of storage techniques used for large numerical data files

NASA Technical Reports Server (NTRS)

Chlouba, V.

1975-01-01

Methods for data storage and output in data banks and memory files are discussed along with a survey of equipment available for this. Topics discussed include magnetic tapes, magnetic disks, Terabit magnetic tape memory, Unicon 690 laser memory, IBM 1360 photostore, microfilm recording equipment, holographic recording, film readers, optical character readers, digital data storage techniques, and photographic recording. The individual types of equipment are summarized in tables giving the basic technical parameters.

BIOPHYSICAL EVALUATION OF INDIVIDUAL COMPONENT LEVELS AND SELECTED CONFIGURATIONS OF THE UNITED STATES MARINE CORPS COLD-WEATHER CLOTHING ENSEMBLE

DTIC Science & Technology

2018-01-02

TECHNICAL REPORT NO. T18-01 DATE January 2018 BIOPHYSICAL EVALUATION OF INDIVIDUAL COMPONENT...USARIEM TECHNICAL REPORT T18-01 BIOPHYSICAL EVALUATION OF INDIVIDUAL COMPONENT LEVELS AND...OF TABLES Table Page Table 1. Clothing and individual equipment descriptions ................................................. 3 Table 2. Surface

THE PROGRAM FOR HEALTH SERVICES IN THE CONNECTICUT VOCATIONAL-TECHNICAL SCHOOLS.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

THE STANDARDS DESIRED FOR HEALTH SERVICES IN THE CONNECTICUT VOCATIONAL-TECHNICAL SCHOOLS ARE PRESENTED. THE DIRECTOR IS RESPONSIBLE FOR THE HEALTH SERVICES OF HIS SCHOOL. HE WILL ARRANGE FOR THE SCHOOL MEDICAL ADVISOR'S SERVICES, EMPLOY THE SCHOOL NURSE, AND MAKE BUDGET PROVISIONS FOR THE PERSONAL SERVICES AND THE NECESSARY EQUIPMENT AND SUPPLIES…

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUCHANAN, J.R.

2000-05-16

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate.

Mechanisation and Automation of Information Library Procedures in the USSR.

ERIC Educational Resources Information Center

Batenko, A. I.

Scientific and technical libraries represent a fundamental link in a complex information storage and retrieval system. The handling of a large volume of scientific and technical data and provision of information library services requires the utilization of computing facilities and automation equipment, and was started in the Soviet Union on a…

77 FR 1129 - Revisions to Test Methods and Testing Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-09

...This action proposes editorial and technical corrections necessary for source testing of emissions and operations. The revisions include the addition of alternative equipment and methods as well as corrections to technical and typographical errors. We also solicit public comment on potential changes to the current procedures for determining emission stratification.

Vocational-Technical Education Today.

ERIC Educational Resources Information Center

American Vocational Association, Alexandria, VA.

Vocational-technical education (VTE) today encompasses a diverse array of programs to equip students with work and life skills. A widening skills gap in the nation's work force, coupled with the fact that only about 20% of the nation's current jobs require a four-year college degree, has made VTE more important than ever before. Research has…

"A Technical Assistance Report" on Computer Technology Applications. Smithville School District, Smithville, Massachusetts.

ERIC Educational Resources Information Center

Merrimack Education Center, Chelmsford, MA.

This report of the Technical Assistance Study provided to the Smithville Public Schools by the Technology Lighthouse of the Merrimack Education Center offers information for use in planning computer technology applications over a 3-year period. It provides specific guidelines and criteria for planning and development, equipment considerations,…

Subsistence Specialist First Class, 9-11. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This self-paced, individualized course, adapted from military curriculum materials for use in vocational and technical education, teaches students about the basic training and supervisory techniques required for proper sanitation of food service personnel and kitchen and dining facility equipment. This student workbook, one of three parts of the…

Intelligent control system based on ARM for lithography tool

NASA Astrophysics Data System (ADS)

Chen, Changlong; Tang, Xiaoping; Hu, Song; Wang, Nan

2014-08-01

The control system of traditional lithography tool is based on PC and MCU. The PC handles the complex algorithm, human-computer interaction, and communicates with MCU via serial port; The MCU controls motors and electromagnetic valves, etc. This mode has shortcomings like big volume, high power consumption, and wasting of PC resource. In this paper, an embedded intelligent control system of lithography tool, based on ARM, is provided. The control system used S5PV210 as processor, completing the functions of PC in traditional lithography tool, and provided a good human-computer interaction by using LCD and capacitive touch screen. Using Android4.0.3 as operating system, the equipment provided a cool and easy UI which made the control more user-friendly, and implemented remote control and debug, pushing video information of product by network programming. As a result, it's convenient for equipment vendor to provide technical support for users. Finally, compared with traditional lithography tool, this design reduced the PC part, making the hardware resources efficiently used and reducing the cost and volume. Introducing embedded OS and the concepts in "The Internet of things" into the design of lithography tool can be a development trend.

Surveying the elements of successful infrared predictive maintenance programs

NASA Astrophysics Data System (ADS)

Snell, John R., Jr.; Spring, Robert W.

1991-03-01

This paper summarizes the results of a survey of over three hundred maintenance personnel who use imaging equipment within their company or organization. All had previously participated in one or more of our training programs. The companies took in a broad range of industry, including, among other, power generation, pulp and paper, metals, mining, petrochemical, automotive and general manufacturing. The organizations were mainly quite large, either commercial or public, and included governmental agencies, military, colleges and universities, municipalities, and utilities. Although we had a very tight time line for the survey, we were pleased to have a 15% response rate. The results show that some of the causes of success and failure in infrared programs are not unlike those associated with any type of program in an organizational structure, i.e. the need for accurate and timely communications; justification requirements; etc. Another set of problems was shared more closely with other startup maintenance technologies (for example, vibration monitoring), such as the need for trending data; providing appropriate technical training; achieving reproducible results; etc. Finally, some of the driving mechanisms are more specific to this technology, such as re-designing equipment so that it can be thermally inspected; establishing effective documentation strategies; etc.

ATS-6 - Technical aspects of the Health/Education Telecommunications Experiment

NASA Technical Reports Server (NTRS)

Boor, J. L.; Braunstein, J.; Janky, J. M.; Ogden, D.; Potter, J. G.; Harper, E. L.; Volkmer, E.; Whalen, A. A.; Henderson, E.; Hupe, H. H.

1975-01-01

An overview is given of the HET experiment on ATS-6. The paper is divided into nine parts, including a technical overview, a preliminary evaluation of the HET demonstration, a review of operations at the Denver uplink terminal, a discussion of remote ground terminals, a review of C-band comprehensive terminals and of S-band comprehensive terminals, and parts devoted to general network operations, technical management and effectiveness of the network, and the site equipment operator.

Survivability Design of Ground Systems for Area Defense Operation in an Urban Scenario

DTIC Science & Technology

2014-09-01

similar to the M2 Bradley AFV. The 50 caliber heavy machine gun technical platoon and mounted anti-tank guided missiles (ATGM) technical platoon...7.62 machine gun . The infantry-carrying BMP-2 has applique steel armor, but its lack of inherent ERA like the T-90 makes it vulnerable against most...vehicle modified to provide an offensive capability. Characterized by its high mobility, technical vehicles are often equipped with heavy machine guns

Self-optimizing approach for automated laser resonator alignment

NASA Astrophysics Data System (ADS)

Brecher, C.; Schmitt, R.; Loosen, P.; Guerrero, V.; Pyschny, N.; Pavim, A.; Gatej, A.

2012-02-01

Nowadays, the assembly of laser systems is dominated by manual operations, involving elaborate alignment by means of adjustable mountings. From a competition perspective, the most challenging problem in laser source manufacturing is price pressure, a result of cost competition exerted mainly from Asia. From an economical point of view, an automated assembly of laser systems defines a better approach to produce more reliable units at lower cost. However, the step from today's manual solutions towards an automated assembly requires parallel developments regarding product design, automation equipment and assembly processes. This paper introduces briefly the idea of self-optimizing technical systems as a new approach towards highly flexible automation. Technically, the work focuses on the precision assembly of laser resonators, which is one of the final and most crucial assembly steps in terms of beam quality and laser power. The paper presents a new design approach for miniaturized laser systems and new automation concepts for a robot-based precision assembly, as well as passive and active alignment methods, which are based on a self-optimizing approach. Very promising results have already been achieved, considerably reducing the duration and complexity of the laser resonator assembly. These results as well as future development perspectives are discussed.

The contribution of Raman spectroscopy to the analytical quality control of cytotoxic drugs in a hospital environment: eliminating the exposure risks for staff members and their work environment.

PubMed

Bourget, Philippe; Amin, Alexandre; Vidal, Fabrice; Merlette, Christophe; Troude, Pénélope; Baillet-Guffroy, Arlette

2014-08-15

The purpose of the study was to perform a comparative analysis of the technical performance, respective costs and environmental effect of two invasive analytical methods (HPLC and UV/visible-FTIR) as compared to a new non-invasive analytical technique (Raman spectroscopy). Three pharmacotherapeutic models were used to compare the analytical performances of the three analytical techniques. Statistical inter-method correlation analysis was performed using non-parametric correlation rank tests. The study's economic component combined calculations relative to the depreciation of the equipment and the estimated cost of an AQC unit of work. In any case, analytical validation parameters of the three techniques were satisfactory, and strong correlations between the two spectroscopic techniques vs. HPLC were found. In addition, Raman spectroscopy was found to be superior as compared to the other techniques for numerous key criteria including a complete safety for operators and their occupational environment, a non-invasive procedure, no need for consumables, and a low operating cost. Finally, Raman spectroscopy appears superior for technical, economic and environmental objectives, as compared with the other invasive analytical methods. Copyright © 2014 Elsevier B.V. All rights reserved.

Electro-optical system for gunshot detection: analysis, concept, and performance

NASA Astrophysics Data System (ADS)

Kastek, M.; Dulski, R.; Madura, H.; Trzaskawka, P.; Bieszczad, G.; Sosnowski, T.

2011-08-01

The paper discusses technical possibilities to build an effective electro-optical sensor unit for sniper detection using infrared cameras. This unit, comprising of thermal and daylight cameras, can operate as a standalone device but its primary application is a multi-sensor sniper and shot detection system. At first, the analysis was presented of three distinguished phases of sniper activity: before, during and after the shot. On the basis of experimental data the parameters defining the relevant sniper signatures were determined which are essential in assessing the capability of infrared camera to detect sniper activity. A sniper body and muzzle flash were analyzed as targets and the descriptions of phenomena which make it possible to detect sniper activities in infrared spectra as well as analysis of physical limitations were performed. The analyzed infrared systems were simulated using NVTherm software. The calculations for several cameras, equipped with different lenses and detector types were performed. The simulation of detection ranges was performed for the selected scenarios of sniper detection tasks. After the analysis of simulation results, the technical specifications of infrared sniper detection system were discussed, required to provide assumed detection range. Finally the infrared camera setup was proposed which can detected sniper from 1000 meters range.

Department of Cybernetic Acoustics

NASA Astrophysics Data System (ADS)

The development of the theory, instrumentation and applications of methods and systems for the measurement, analysis, processing and synthesis of acoustic signals within the audio frequency range, particularly of the speech signal and the vibro-acoustic signal emitted by technical and industrial equipments treated as noise and vibration sources was discussed. The research work, both theoretical and experimental, aims at applications in various branches of science, and medicine, such as: acoustical diagnostics and phoniatric rehabilitation of pathological and postoperative states of the speech organ; bilateral ""man-machine'' speech communication based on the analysis, recognition and synthesis of the speech signal; vibro-acoustical diagnostics and continuous monitoring of the state of machines, technical equipments and technological processes.

Trace Contaminant Control During the International Space Station's On-Orbit Assembly and Outfitting

NASA Technical Reports Server (NTRS)

Perry, J. L.

2017-01-01

Achieving acceptable cabin air quality must balance competing elements during spacecraft design, assembly, ground processing, and flight operations. Among the elements that contribute to the trace chemical contaminant load and, therefore, the cabin air quality aboard crewed spacecraft are the vehicle configuration, crew size and activities, mission duration and objectives, materials selection, and vehicle manufacturing and preflight ground processing methods. Trace chemical contaminants produced from pervasive sources such as equipment offgassing, human metabolism, and cleaning fluids during preflight ground processing present challenges to maintaining acceptable cabin air quality. To address these challenges, both passive and active contamination control techniques are used during a spacecraft's design, manufacturing, preflight preparation, and operational phases. Passive contamination control methods seek to minimize the equipment offgassing load by selecting materials, manufacturing processes, preflight preparation processes, and in-flight operations that have low chemical offgassing characteristics. Passive methods can be employed across the spacecraft's entire life cycle from conceptual design through flight operations. However, because the passive contamination control techniques cannot fully eliminate the contaminant load, active contamination control equipment must be deployed aboard the spacecraft to purify and revitalize the cabin atmosphere during in-flight operations. Verifying that the passive contamination control techniques have successfully maintained the total trace contaminant load within the active contamination control equipment's capabilities occurs late in the preflight preparation stages. This verification consists of subjecting the spacecraft to an offgassing test to determine the trace contaminant load. This load is then assessed versus the active contamination control equipment's capabilities via trace contaminant control (TCC) engineering analysis. During the International Space Station's (ISS's) on-orbit assembly and outfitting, a series of engineering analyses were conducted to evaluate how effective the passive TCC methods were relative to providing adequate operational margin for the active TCC equipment's capabilities aboard the ISS. These analyses were based on habitable module and cargo vehicle offgassing test results. The offgassing test for a fully assembled module or cargo vehicle is an important preflight spacecraft evaluation method that has been used successfully during all crewed spacecraft programs to provide insight into how effectively the passive contamination control methods limit the equipment offgassing component of the overall trace contaminant generation load. The progression of TCC assessments beginning in 1998 with the ISS's first habitable element launch and continuing through the final pressurized element's arrival in 2010 are presented. Early cargo vehicle flight assessments between 2008 and 2011 are also presented as well as a discussion on predictive methods for assessing cargo via a purely analytical technique. The technical approach for TCC employed during this 13-year period successfully maintained the cabin atmospheric quality within specified parameters during the technically challenging ISS assembly and outfitting stages. The following narrative provides details on the important role of spacecraft offgassing testing, trace contaminant performance requirements, and flight rules for achieving the ultimate result-a cabin environment that enables people to live and work safely in space.

Selection of Additive Manufacturing (AM) Equipment

DTIC Science & Technology

2017-04-01

in the design , test, and fabrication of the systems within the AMRDEC portfolio. 14. SUBJECT TERMS Additive Manufacturing (AM), Fused Deposition...tools in the design and development of AMRDEC products .   Figure 1. Stratasys Objet Connex3 [1] While these machines and technologies have...TECHNICAL REPORT RDMR-WD-16-87 SELECTION OF ADDITIVE MANUFACTURING (AM) EQUIPMENT Lance E. Hall Weapons Development

A Feasibility Study of California Community Colleges as Agents for Equipment Fire Prevention Education, 1973-1974.

ERIC Educational Resources Information Center

Gladen, Frank H.; And Others

The possibility of using the vocational/technical instructors of the California Community Colleges as a fire-prevention-education resource was explored. A questionnaire was sent to 99 California community colleges, of which 71 replied. The questionnaire addressed the following questions: (1) Is the topic of equipment or machine-caused fires…

Dredging: An Annotated Bibliography on Operations, Equipment, and Processes. Revision.

DTIC Science & Technology

1982-03-01

establishing producing centers, enterprises, financial planning, and technical specifications for plant and equipment. Drilling and laboratory results are...summarised, and resource, market, technological and environmental bases described. Prospect drilling of calcareous sandstone (kurkar and calcarenite...Automation; Pumps and impellers; Cavitation; Cost and econ- omy of dredging; Drilling and blasting; Spoil disposal; Deep sea dredg- ing; River dredging

Military Curriculum Materials for Vocational and Technical Education. Telephone Switching Equipment Repairman 5-6. (Electromechanical) CDC36251.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These individualized, self-paced student texts for a secondary-postsecondary level course for telephone switching equipment repairman are one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The five-volume course is designed to provide…

Aeronautical Engineering: A continuing bibliography

NASA Technical Reports Server (NTRS)

1982-01-01

This bibliography lists 347 reports, articles and other documents introduced into the scientific and technical information system. Documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated compounds, equipment, and systems are included. Research and development in aerodynamics, aeronautics and ground support equipment for aeronautical vehicles are also included.

The STD Site Operator. Satellite Technology Demonstration, Technical Report No. 0419.

ERIC Educational Resources Information Center

Braunstein, Jean

Intimately involved in any equipment system is the human factor. The people operating the equipment at the remote installations for the Satellite Technology Demonstration (STD) were different from paid employees or from private consumers. The STD site operators were paid only token fees; thus, they are best describd as having been motivated by the…

Development and Comparison of Technical Solutions for Electricity Monitoring Equipment

NASA Astrophysics Data System (ADS)

Potapovs, A.; Obushevs, A.

2017-12-01

The paper focuses on the elaboration of a demand-side management platform for optimal energy management strategies; the topicality is related to the description and comparison of the developed electricity monitoring and control equipment. The article describes two versions based on Atmega328 and STM32 microcontrollers, a lower and higher level of precision, and other distinct performance parameters. At the end of the article, the results of the testing of the two types of equipment are given and their comparison is made.

Logistics Operations Management Center: Maintenance Support Baseline (LOMC-MSB)

NASA Technical Reports Server (NTRS)

Kurrus, R.; Stump, F.

1995-01-01

The Logistics Operations Management Center Maintenance Support Baseline is defined. A historical record of systems, applied to and deleted from, designs in support of future management and/or technical analysis is provided. All Flight elements, Ground Support Equipment, Facility Systems and Equipment and Test Support Equipment for which LOMC has responsibilities at Kennedy Space Center and other locations are listed. International Space Station Alpha Program documentation is supplemented. The responsibility of the Space Station Launch Site Support Office is established.

USGS Scientific Visualization Laboratory

USGS Publications Warehouse

,

1995-01-01

The U.S. Geological Survey's (USGS) Scientific Visualization Laboratory at the National Center in Reston, Va., provides a central facility where USGS employees can use state-of-the-art equipment for projects ranging from presentation graphics preparation to complex visual representations of scientific data. Equipment including color printers, black-and-white and color scanners, film recorders, video equipment, and DOS, Apple Macintosh, and UNIX platforms with software are available for both technical and nontechnical users. The laboratory staff provides assistance and demonstrations in the use of the hardware and software products.

77 FR 50589 - Agreements and Memoranda of Understanding Between the Food and Drug Administration and Other...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

...: Final rule. SUMMARY: This final rule makes technical changes that will update a requirement that many of the written agreements and memoranda of understanding (MOUs) between the Food and Drug Administration.... This final rule, accordingly, eliminates it. We are making these technical changes to conserve Agency...

77 FR 30514 - Native Hawaiian Career and Technical Education Program; Final Waiver and Extension of Project Period

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... DEPARTMENT OF EDUCATION Native Hawaiian Career and Technical Education Program; Final Waiver and.... ACTION: Notice. Overview Information Final Waiver and Extension of Project Period for the Native Hawaiian.... SUMMARY: For 36-month projects funded in fiscal year (FY) 2009 under the Native Hawaiian Career and...

Advances in anesthesia technology are improving patient care, but many challenges remain.

PubMed

John Doyle, D; Dahaba, Ashraf; LeManach, Yannick

2018-04-13

Although significant advances in clinical monitoring technology and clinical practice development have taken place in the last several decades, in this editorial we argue that much more still needs to be done. We begin by identifying many of the improvements in perioperative technology that have become available in recent years; these include electroencephalographic depth of anesthesia monitoring, bedside ultrasonography, advanced neuromuscular transmission monitoring systems, and other developments. We then discuss some of the perioperative technical challenges that remain to be satisfactorily addressed, such as products that incorporate poor software design or offer a confusing user interface. Finally we suggest that the journal support initiatives to help remedy this problem by publishing reports on the evaluation of medical equipment as a means to restore the link between clinical research and clinical end-users.

Designing a Hybrid Laminar-Flow Control Experiment: The CFD-Experiment Connection

NASA Technical Reports Server (NTRS)

Streett, C. L.

2003-01-01

The NASA/Boeing hybrid laminar flow control (HLFC) experiment, designed during 1993-1994 and conducted in the NASA LaRC 8-foot Transonic Pressure Tunnel in 1995, utilized computational fluid dynamics and numerical simulation of complex fluid mechanics to an unprecedented extent for the design of the test article and measurement equipment. CFD was used in: the design of the test wing, which was carried from definition of desired disturbance growth characteristics, through to the final airfoil shape that would produce those growth characteristics; the design of the suction-surface perforation pattern that produced enhanced crossflow-disturbance growth: and in the design of the hot-wire traverse system that produced minimal influence on measured disturbance growth. These and other aspects of the design of the test are discussed, after the historical and technical context of the experiment is described.

Chemical warfare agent detection: a review of current trends and future perspective.

PubMed

Pacsial-Ong, Eden Joy; Aguilar, Zoraida P

2013-01-01

The World Health Organization recommends countries to create a public health system that can respond to the deliberate release of chemical warfare agents (CWAs). Procedures for preparedness, response, decontamination protocols and medical countermeasures against CWA attacks are described. Known CWAs, including their properties and pharmacological consequences upon exposure, are tabulated and discussed. Requirements imposed on detection systems by various applications and environmental needs are presented in order to assess the devices for detection and identification of specific CWAs. The review surveys current and near-term detection technologies and equipments, as well as devices that are currently available to the military and civilian first responders. Brief technical discussions of several detection technologies are presented, with emphasis placed in the principles of detection. Finally, enabling technologies that form the basis for advanced sensing systems and devices are described.

Diesel-fired self-pumping water heater

NASA Astrophysics Data System (ADS)

Gertsmann, Joseph

1994-07-01

The object of this project was to study the feasibility of pumping and heating water by sustained oscillatory vaporization and condensation in a fired heat exchanger. Portable field liquid fueled water heaters would facilitate heating water for sanitation, personal hygiene, food service, laundry, equipment maintenance, and decontamination presently available only from larger, less portable, motorized pumping units. The technical tasks consisted of: development of an analytical model, operation of proof-of-principal prototypes, and determination of the thermal and mechanical relationships to evaluate operating range and control characteristics. Four successive pump models were analyzed and tested. The final analytical model gave reasonable agreement with the experimental results, indicating that the actual pumping effect was an order of magnitude lower than originally anticipated. It was concluded that a thermally-activated self pumping water heater based on the proposed principle is not feasible.

78 FR 40835 - Medicare Program; End-Stage Renal Disease Prospective Payment System, Quality Incentive Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

...This rule proposes to update and make revisions to the End- Stage Renal Disease (ESRD) prospective payment system (PPS) for calendar year (CY) 2014. This rule also proposes to set forth requirements for the ESRD quality incentive program (QIP), including for payment year (PY) 2016 and beyond. In addition, this rule proposes to clarify the grandfathering provision related to the 3-year minimum lifetime requirement (MLR) for Durable Medical Equipment (DME). In addition, it provides clarification of the definition of routinely purchased DME. This rule also proposes the implementation of budget- neutral fee schedules for splints and casts, and intraocular lenses (IOLs) inserted in a physician's office. Finally, this rule would make a few technical amendments and corrections to existing regulations related to payment for DMEPOS items and services.

CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

ERIC Educational Resources Information Center

BEAUMONT, JOHN A; AND OTHERS

DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

56. Photocopy of Mechanical drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. Photocopy of Mechanical drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. H-12 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - EQUIPMENT ROOM PLANS. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Construction Mechanic Part I, 8-5. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the first of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic combustion engine principles and electrical system principles as well…

77 FR 24952 - Staff Technical Conference on Geomagnetic Disturbances to the Bulk-Power System; Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... risks and impacts from geomagnetically induced currents to transformers and other equipment on the Bulk... this event in the Calendar. The event will contain a link to the webcast. The Capitol Connection... for a fee. If you have any questions, visit www.CapitolConnection.org or call 703-993-3100. Commission...

Measure for Measure: A Guide to Metrication for Workshop Crafts and Technical Studies.

ERIC Educational Resources Information Center

Schools Council, London (England).

This booklet is designed to help teachers of the industrial arts in Great Britain during the changeover to metric units which is due to be substantially completed during the period 1970-1975. General suggestions are given for adapting equipment in metalwork and engineering and woodwork and technical drawing by adding some metric equipment…

Positioning Research and Practice in Career and Technical Education: A Framework for College and Career Preparation in the 21st Century

ERIC Educational Resources Information Center

Rojewski, Jay W.; Hill, Roger B.

2014-01-01

Workforce preparation, including Career and Technical Education (CTE), provides opportunities for people to become successful participants in the global workplace. To accomplish this purpose, people must be equipped with knowledge and skills necessary to fulfill personal interests and goals, develop leadership skills, and become qualified and…

An Assessment of Need for Developing and Implementing Technical and Skilled Worker Training for the Solar Energy Industry.

ERIC Educational Resources Information Center

Orsak, Charles G.; And Others

A Navarro College, Texas, study determined the quantitative and qualitative needs for developing skilled manpower for the solar industry and secondarily identified the (present) solar industry manpower populations and tasks performed by solar technical and skilled workers. Results from three initial working groups addressing equipment, market…

Construction Mechanic Part II, 8-6. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the second of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic chassis and power train troubleshooting, diagnosis, and adjustment…

Construction Mechanic, Engine Tune-Up I, 8-7. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, teaches students to perform a complete engine tune-up using appropriate hand tools, special tools, and testing equipment. Students completing the course will be able to diagnose gasoline-engine performance and perform corrective measures to…

Das Sprachlabor in der Schule (The Language Laboratory in Schools).

ERIC Educational Resources Information Center

Cabus, Hans-Joachim; Freudenstein, Reinhold

This technical manual for the use of language laboratories includes information on the following topics: (1) types of laboratories, (2) the tape, (3) the tape recorder, (4) other basic technical equipment, (5) the audio-active laboratory, the audio-active-compare laboratory, and an evaluation of the two, (6) possibilities for expanded use, (7)…

LANGUAGE LABORATORY FACILITIES, TECHNICAL GUIDE FOR THE SELECTION, PURCHASE, USE, AND MAINTENANCE, STUDY 4--NEW MEDIA FOR INSTRUCTION.

ERIC Educational Resources Information Center

HAYES, ALFRED S.

THE MANY POSSIBLE VARIATIONS OF LANGUAGE LABORATORY SYSTEMS WERE DESCRIBED, AND RELATIVE ADVANTAGES AND LIMITATIONS OF EACH WERE DISCUSSED. DETAILED GUIDANCE ON PURCHASING LANGUAGE LABORATORY EQUIPMENT WAS PROVIDED THROUGH (1) DEFINITION OF HIGH-QUALITY SPEECH REPRODUCTION, (2) DISCUSSION OF TECHNICAL FACTORS WHICH AFFECT ITS ACHIEVEMENT, AND (3)…

Offshore Teaching Practice in the Australia-Pacific Technical College: A Case Study in the South Pacific

ERIC Educational Resources Information Center

Bailey, Anthony

2011-01-01

This paper investigates teaching practices at the Australia-Pacific Technical College (APTC), which comprise a unique official development assistance (ODA) program funded by the Government of Australia (GoA) and managed through the Australian Agency for International Development (AusAid) with the aim of training and equipping workers from the…

Technical-Vocational Education and Language Policy in Ghana

ERIC Educational Resources Information Center

Adogpa, James Nsoh

2015-01-01

Technical and vocational graduates in Ghana are often ill-equipped to become self-reliant or well-fitted into the demands of the job market. This pattern can be examined in terms of the educational language policy implementation that disregards regional linguistic needs. This seems to arise as a result of the medium of instruction that is…

Equipment management user's handbook for property custodians

NASA Technical Reports Server (NTRS)

1993-01-01

The NASA Equipment Management User's Handbook for Property Custodians is issued as an instructional guide for personnel designated as property custodians and technical personnel involved in the acquisition, management, and use of NASA-owned equipment. This handbook provides general information and basic operational procedures for processing equipment transactions through the agency-wide NASA Equipment Management System (NEMS). Each NASA installation must prepare supplementary instructions for local requirements beyond the scope of NASA-wide policies and procedures contained herein, or as specified for local implementation in NHB 4200.1, 'NASA Equipment Management Manual.' NHB 4200.1 sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This handbook is a controlled document, issued in loose-leaf form and revised by page changes. Additional copies for internal use may be obtained through normal distribution.

The research of medical equipment on-line detection system based on Android smartphone

NASA Astrophysics Data System (ADS)

Jiang, Junjie; Dong, Xinyu; Zhang, Hongjie; Liu, Mengjun

2017-06-01

With the unceasing enhancement of medical level, the expanding scale of medical institutions, medical equipment as an important tool for disease diagnosis, treatment and prevention, used in all levels of medical institutions. The quality and accuracy of the Medical equipment play a key role in the doctor's diagnosis and treatment effect, medical metrology as the important technical foundation is to ensure that the equipment, technology, material components are accurate and the application is safe and reliable. Medical equipment have the feature of variety, large quantity, long using cycle, expensive and multi-site, which bring great difficulty in maintenance, equipment management and verification. Therefore, how to get the medical measurement integrate deeply into the advanced internet technology, information technology and the new measuring method, for real-time monitoring of medical equipment, tracking, positioning, and query is particularly important.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report summarizes geothermal technical assistance, R&D, and technology transfer activities of the Geo-Heat Center. It describes 95 contacts with parties during this period related to technical assistance with goethermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics, and resources. Research activities are summarized on geothermal district heating system cost evaluation and silica waste utilization project. Outreach activities include publication of a geothermal direct use Bulletin, dissemination of information, goethermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

2005 v4.3 Technical Support Document

EPA Pesticide Factsheets

Emissions Modeling for the Final Mercury and Air Toxics Standards Technical Support Document describes how updated 2005 NEI, version 2 emissions were processed for air quality modeling in support of the final Mercury and Air Toxics Standards (MATS).

Constructing the "Best" Reliability Data for the Job

NASA Technical Reports Server (NTRS)

DeMott, D. L.; Kleinhammer, R. K.

2014-01-01

Modern business and technical decisions are based on the results of analyses. When considering assessments using "reliability data", the concern is how long a system will continue to operate as designed. Generally, the results are only as good as the data used. Ideally, a large set of pass/fail tests or observations to estimate the probability of failure of the item under test would produce the best data. However, this is a costly endeavor if used for every analysis and design. Developing specific data is costly and time consuming. Instead, analysts rely on available data to assess reliability. Finding data relevant to the specific use and environment for any project is difficult, if not impossible. Instead, we attempt to develop the "best" or composite analog data to support our assessments. One method used incorporates processes for reviewing existing data sources and identifying the available information based on similar equipment, then using that generic data to derive an analog composite. Dissimilarities in equipment descriptions, environment of intended use, quality and even failure modes impact the "best" data incorporated in an analog composite. Once developed, this composite analog data provides a "better" representation of the reliability of the equipment or component can be used to support early risk or reliability trade studies, or analytical models to establish the predicted reliability data points. Data that is more representative of reality and more project specific would provide more accurate analysis, and hopefully a better final decision.

Constructing the Best Reliability Data for the Job

NASA Technical Reports Server (NTRS)

Kleinhammer, R. K.; Kahn, J. C.

2014-01-01

Modern business and technical decisions are based on the results of analyses. When considering assessments using "reliability data", the concern is how long a system will continue to operate as designed. Generally, the results are only as good as the data used. Ideally, a large set of pass/fail tests or observations to estimate the probability of failure of the item under test would produce the best data. However, this is a costly endeavor if used for every analysis and design. Developing specific data is costly and time consuming. Instead, analysts rely on available data to assess reliability. Finding data relevant to the specific use and environment for any project is difficult, if not impossible. Instead, we attempt to develop the "best" or composite analog data to support our assessments. One method used incorporates processes for reviewing existing data sources and identifying the available information based on similar equipment, then using that generic data to derive an analog composite. Dissimilarities in equipment descriptions, environment of intended use, quality and even failure modes impact the "best" data incorporated in an analog composite. Once developed, this composite analog data provides a "better" representation of the reliability of the equipment or component can be used to support early risk or reliability trade studies, or analytical models to establish the predicted reliability data points. Data that is more representative of reality and more project specific would provide more accurate analysis, and hopefully a better final decision.

The Center for Space Telemetering and Telecommunications Systems

NASA Technical Reports Server (NTRS)

Horan, S.; DeLeon, P.; Borah, D.; Lyman, R.

2003-01-01

This report comprises the final technical report for the research grant 'Center for Space Telemetering and Telecommunications Systems' sponsored by the National Aeronautics and Space Administration's Goddard Space Flight Center. The grant activities are broken down into the following technology areas: (1) Space Protocol Testing; (2) Autonomous Reconfiguration of Ground Station Receivers; (3) Satellite Cluster Communications; and (4) Bandwidth Efficient Modulation. The grant activity produced a number of technical reports and papers that were communicated to NASA as they were generated. This final report contains the final summary papers or final technical report conclusions for each of the project areas. Additionally, the grant supported students who made progress towards their degrees while working on the research.

SAFE KLEEN

EPA Pesticide Factsheets

Technical product bulletin: this surface washing agent used in oil spill cleanups can be applied by spray, brush, mop, or standard pressure washing equipment. Agitation during application assists efficiency.

Promotion of the Equal Access of Girls and Women to Technical and Vocational Education. Studies on Technical and Vocational Education 7.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This monograph includes the final report of the International Expert Meeting on the Promotion of Equal Access of Girls and Women to Technical and Vocational Education (TVE) held in Seoul, Republic of Korea, and country discussion papers. The final report is composed of an introduction that proposes that many Member States require special measures…

Equipped for the Future Research Report: Building the Framework, 1993-1997. EFF Technical Report.

ERIC Educational Resources Information Center

Merrifield, Juliet

This report focuses on the research aspects of the Equipped for the Future (EFF) project that works toward system reform for adult literacy and lifelong learning. Section 1 describes the EFF process 1993-97, the impetus for EFF, and approaches to system reform. Section 2 explores the research processes EFF uses to build a framework that could…

Deploying Electric Vehicles and Electric Vehicle Supply Equipment: Tiger Teams Offer Project Assistance for Federal Fleets

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

To assist federal agencies with the transition to plug-in electric vehicles (PEVs), including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), FEMP offers technical guidance on electric vehicle supply equipment (EVSE) installations and site-specific planning through partnerships with the National Renewable Energy Laboratory’s EVSE Tiger Teams.

Aeronautical engineering: A continuing bibliography with indexes (supplement 284)

NASA Technical Reports Server (NTRS)

1992-01-01

This bibliography lists 974 reports, articles, and other documents introduced into the NASA scientific and technical information system in Oct. 1992. The coverage includes documents on design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

Inspector (dental equip.) 712.887; Inspector, Plastic (dental equip.) 712.687--Technical Report on Development of USES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Plaster Trimmer (dental equip.) 712.887; Inserter (dental equip.) 712.884--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Safety for Compressed Gas and Air Equipment. Module SH-26. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety for compressed gas and air equipment is one of 50 modules concerned with job safety and health. This module presents technical data about commonly used gases and stresses the procedures necessary for safe handling of compressed gases. Following the introduction, 14 objectives (each keyed to a page in the text) the…

Nonelectronic Parts Reliability Data 1991

DTIC Science & Technology

1991-05-01

E6) Page Electrical Filter, Micrwave ,Band Pass Com GB 13567-021 < 0.0377 0 26.5512 3-180 Electrical Filter,Micridave, High Pass Ccm GB 13567-021...device and equipment manufacturers , government laboratories and equipment users (government and industry). Automatic distribution lists, voluntary...information and data contained herein have been compiled from government and nongovernment technical reports and from material supplied by various manufacturers

Assembler (elec. equip.) 826.884, Assembler, Electrical (elec. equip.) 826.884--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

KENNEDY SPACE CENTER, FLA. - The STS-114 crew stands underneath Discovery in the Orbiter Processing Facility. From left are Mission Specialist Stephen Robinson, Pilot James Kelly, Mission Specialist Charles Camarda, astronaut John Young, Commander Eileen Collins and Mission Specialists Andrew Thomas, Wendy Lawrence and Soichi Noguchi, who is with the Japanese Aerospace and Exploration Agency. Young is associate director, Technical, at Johnson Space Center. The crew is spending time becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

NASA Image and Video Library

2004-03-05

KENNEDY SPACE CENTER, FLA. - The STS-114 crew stands underneath Discovery in the Orbiter Processing Facility. From left are Mission Specialist Stephen Robinson, Pilot James Kelly, Mission Specialist Charles Camarda, astronaut John Young, Commander Eileen Collins and Mission Specialists Andrew Thomas, Wendy Lawrence and Soichi Noguchi, who is with the Japanese Aerospace and Exploration Agency. Young is associate director, Technical, at Johnson Space Center. The crew is spending time becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

KENNEDY SPACE CENTER, FLA. - - In the Orbiter Processing Facility, STS-114 Mission Specialists Andrew Thomas, Soichi Noguchi and Charles Camarda greet astronaut John Young (far right), who flew on the first flight of Space Shuttle Columbia with Robert Crippen. Behind Camarda is Pilot James Kelly. Young is associate director, Technical, at Johnson Space Center. Noguchi represents the Japanese Aerospace and Exploration Agency. The STS-114 crew is spending time becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

NASA Image and Video Library

2004-03-05

KENNEDY SPACE CENTER, FLA. - - In the Orbiter Processing Facility, STS-114 Mission Specialists Andrew Thomas, Soichi Noguchi and Charles Camarda greet astronaut John Young (far right), who flew on the first flight of Space Shuttle Columbia with Robert Crippen. Behind Camarda is Pilot James Kelly. Young is associate director, Technical, at Johnson Space Center. Noguchi represents the Japanese Aerospace and Exploration Agency. The STS-114 crew is spending time becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

Heat Treat Shop in the Technical Services Building

NASA Image and Video Library

1948-01-21

A technician prepares a metal component for a high-temperature bake in the Heat Treatment Shop at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. Fabrication Division under Dan White and John Dalgleish created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the Fab Shop, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Metallurgical Laboratory contained a control lab for the Heat Treating Shop and a service lab for the NACA Lewis research divisions. This metallurgical group performed tensile and impact tests on metals to determine their suitability for specific research or equipment. The Heat Treating Shop heated metal parts to optimize their physical properties and contained a Precision Castings Foundry to manufacture equipment made of heat resisting alloys.

[Management of technology in intensive care].

PubMed

Madureira, C R; Veiga, K; Sant'ana, A F

2000-12-01

The lives of hospitalized patients depend on diagnostic-therapeutic procedures and on the care provided by the health team. It also depends on the quality and availability of factors such as: physical structure and material and human and financial resources. The need to optimize these resources and re-establish patients' health has brought about the Intensive Care Units (ICU), whose design must consider the physical environment and clinical equipment which are indispensable in health care. Aiming at identifying the level of knowledge of health professionals as to technical and operational information in equipment manuals and the perception of the interviewed professionals in relation to the adequacy of the physical and electrical installations of such units, we conducted a descriptive study in an ICU of a public hospital in Salvador, Brazil. The results show that such installations were considered to be unsuitable for the safe development of activities and that most of the health team members did not know the technical or operational specifications in the equipment manuals.

Distributed photovoltaic systems - Addressing the utility interface issues

NASA Astrophysics Data System (ADS)

Firstman, S. I.; Vachtsevanos, G. J.

This paper reviews work conducted in the United States on the impact of dispersed photovoltaic sources upon utility operations. The photovoltaic (PV) arrays are roof-mounted on residential houses and connected, via appropriate power conditioning equipment, to the utility grid. The presence of such small (4-6 Kw) dispersed generators on the distribution network raises questions of a technical, economic and institutional nature. After a brief identification of utility interface issues, the paper addresses such technical concerns as protection of equipment and personnel safety, power quality and utility operational stability. A combination of experimental and analytical approaches has been adopted to arrive at solutions to these problems. Problem areas, under various PV system penetration scenarios, are identified and conceptual designs of protection and control equipment and operating policies are developed so that system reliability is maintained while minimizing capital costs. It is hoped that the resolution of balance-of-system and grid interface questions will ascertain the economic viability of photovoltaic systems and assist in their widespread utilization in the future.

Air Quality Modeling Technical Support Document for the Final Cross State Air Pollution Rule Update

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the final Cross State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS).

7 CFR 614.7 - Preliminary technical determinations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Preliminary technical determinations. 614.7 Section... Preliminary technical determinations. (a) A preliminary technical determination becomes final 30 days after... purpose of gathering additional information and discussing the facts relating to the preliminary technical...

Research on Modularized Design and Allocation of Infectious Disease Prevention and Control Equipment in China.

PubMed

Zhao, Xin; Wang, Yun-Dou; Zhang, Xiao-Feng; Gao, Shu-Tian; Guo, Li-Jun; Sun, Li-Na

2017-06-01

For the prevention and control of newly emergent or sudden infectious diseases, we built an on-site, modularized prevention and control system and tested the equipment by using the clustering analysis method. On the basis of this system, we propose a modular equipment allocation method and 4 applications of this method for different types of infectious disease prevention and control. This will help to improve the efficiency and productivity of anti-epidemic emergency forces and will provide strong technical support for implementing more universal and serialized equipment in China. (Disaster Med Public Health Preparedness. 2017;11:375-382).

Monoscopic photogrammetry to obtain 3D models by a mobile device: a method for making facial prostheses.

PubMed

Salazar-Gamarra, Rodrigo; Seelaus, Rosemary; da Silva, Jorge Vicente Lopes; da Silva, Airton Moreira; Dib, Luciano Lauria

2016-05-25

The aim of this study is to present the development of a new technique to obtain 3D models using photogrammetry by a mobile device and free software, as a method for making digital facial impressions of patients with maxillofacial defects for the final purpose of 3D printing of facial prostheses. With the use of a mobile device, free software and a photo capture protocol, 2D captures of the anatomy of a patient with a facial defect were transformed into a 3D model. The resultant digital models were evaluated for visual and technical integrity. The technical process and resultant models were described and analyzed for technical and clinical usability. Generating 3D models to make digital face impressions was possible by the use of photogrammetry with photos taken by a mobile device. The facial anatomy of the patient was reproduced by a *.3dp and a *.stl file with no major irregularities. 3D printing was possible. An alternative method for capturing facial anatomy is possible using a mobile device for the purpose of obtaining and designing 3D models for facial rehabilitation. Further studies must be realized to compare 3D modeling among different techniques and systems. Free software and low cost equipment could be a feasible solution to obtain 3D models for making digital face impressions for maxillofacial prostheses, improving access for clinical centers that do not have high cost technology considered as a prior acquisition.

The awareness and attitudes of students of one indian dental school toward information technology and its use to improve patient care.

PubMed

Jathanna, Vinod R; Jathanna, Ramya V; Jathanna, Roopalekha

2014-01-01

Many obstacles need to be overcome if digital and electronic technologies are to be fully integrated in the operation of dental clinics in some countries. These obstacles may be physical, technical, or psychosocial barriers in the form of perceptions and attitudes related to software incompatibilities, patient privacy, and interference with the patient-practitioner relationship. The objectives of the study are to assess the perceptions of Indian dental students of one school toward the usefulness of digital technologies in improving dental practice; their willingness to use digital and electronic technologies; the perceived obstacles to the use of digital and electronic technologies in dental care setups; and their attitudes toward Internet privacy issues. The study population consisted of 186 final year undergraduate dental students from the A. B. Shetty Memorial institute of Dental Sciences, Rajiv Gandhi University of Health Sciences, Mangalore, India. Survey data were analyzed descriptively . Most students indicated that information technology enhances patient satisfaction, the quality of dental record, diagnosis, treatment planning, and doctor-doctor communication. Cost of equipment and need for technical training were regarded as major obstacles by substantial proportions of respondents. Most dental students at our school feel that the information technology will support their decision making in diagnoses and devising effective treatment plans, which in turn increase patient satisfaction and quality of care. Students also perceived that lack of technical knowledge and the high cost of implementation are major barriers to developing information technology in India.

46 CFR 11.335 - Requirements to qualify for an STCW endorsement as an electro-technical officer on vessels...

Code of Federal Regulations, 2014 CFR

2014-10-01

... electro-technical officer on vessels powered by main propulsion machinery of 750 kW/1,000 HP or more... propulsion machinery of 750 kW/1,000 HP or more (operational level). (a) To qualify for an STCW endorsement... electronics. (iii) Integrated navigation equipment. (iv) Ship propulsion and auxiliary machinery. (v...

Operator Performance Support System (OPSS)

DTIC Science & Technology

1992-02-01

both the military and the industry. The OPSS will propose practical application’ in how to more closely align the relationships between technical...industry. The OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator...commercial programs provide flexibility to suppori existing and futurc kourscware and "hardware enhancements. In the development process of the OPSS

Field Study: A Welding Survey of the Blackhawk Technical Institute Industries (Up-dating the Welding Curriculum).

ERIC Educational Resources Information Center

Lesch, Gerald E.

In 1972, the welding department personnel at Blackhawk Technical Institute in Wisconsin undertook the project of updating the curriculum of their one-year welding degree program. A study was conducted of local welding industries to determine hiring policies, the tools and equipment a beginning welder should purchase, the types of welding processes…

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

Within compound, from Guard Tower (Building 5762), looking southwest, Technical ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Guard Tower (Building 5762), looking southwest, Technical Equipment Building (Building 5760) to left, Microwave Tower (associated with Building 5769) and Civil Engineering Storage Building (Building 5766) to left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Innovative methods of popularizing technical education

NASA Astrophysics Data System (ADS)

Shkitsa, L. Y.; Panchuk, V. G.; Kornuta, V. A.

2017-05-01

There have been analyzed reasons of the loss of technical education’s popularity. Also, the analysis of known educational and production methods, oriented at the innovative model of development of society, was performed. It is stated that the acquisition of 21st century’s skills as a result of competition of technical education are natural for the DIY ideology, which was realized in the institutions like Fab Lab. The new educational strategy, based on project-based learning, is proposed to be implemented as a special laboratory with equipment, which would be a center of innovative development for students at the Technical University. Moreover, the list of projects planned for implementation, that includes not only projects, specific to a particular university, but also projects, demanded by society as a whole, is specified. It is worth to implement trendy projects in the laboratory, such as toy-like, ecological projects; projects of the energy dependence decrease or the energy efficiency increase, modern digital or innovative projects etc. The student should gain knowledge, skills and, possibly, equipment that are available for immediate usage on the labor market or for the realization of his own projects or the community’s projects in everyday life after the realization of the particular project at the laboratory

Contract management using cause-effect clues in service worksheets.

PubMed

Chen, J H

1996-01-01

Sophisticated equipment often needs intensive technical resources to maintain its system availability. Service contracts can be an easy channel to outside technical resources. Usually, a service contract purchaser only sees its cost instead of its maintenance quality. A system's needs, however, depend on the trade-off between the cost paid and the quality received. If a clinical engineer can actively interpret and integrate the cause-effect consequences on the compiled service worksheets, those clues can serve as a criterion to justify the quality and the cost-effectiveness of a service contract. Through the analysis of the service labor consumed, the justification of the parts replaced, and the assessment of the "fit" to system availability, this paper provides a cost-effective tool for equipment management.

A National Needs Assessment to Identify Technical Procedures in Vascular Surgery for Simulation Based Training.

PubMed

Nayahangan, L J; Konge, L; Schroeder, T V; Paltved, C; Lindorff-Larsen, K G; Nielsen, B U; Eiberg, J P

2017-04-01

Practical skills training in vascular surgery is facing challenges because of an increased number of endovascular procedures and fewer open procedures, as well as a move away from the traditional principle of "learning by doing." This change has established simulation as a cornerstone in providing trainees with the necessary skills and competences. However, the development of simulation based programs often evolves based on available resources and equipment, reflecting convenience rather than a systematic educational plan. The objective of the present study was to perform a national needs assessment to identify the technical procedures that should be integrated in a simulation based curriculum. A national needs assessment using a Delphi process was initiated by engaging 33 predefined key persons in vascular surgery. Round 1 was a brainstorming phase to identify technical procedures that vascular surgeons should learn. Round 2 was a survey that used a needs assessment formula to explore the frequency of procedures, the number of surgeons performing each procedure, risk and/or discomfort, and feasibility for simulation based training. Round 3 involved elimination and ranking of procedures. The response rate for round 1 was 70%, with 36 procedures identified. Round 2 had a 76% response rate and resulted in a preliminary prioritised list after exploring the need for simulation based training. Round 3 had an 85% response rate; 17 procedures were eliminated, resulting in a final prioritised list of 19 technical procedures. A national needs assessment using a standardised Delphi method identified a list of procedures that are highly suitable and may provide the basis for future simulation based training programs for vascular surgeons in training. Copyright © 2017 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Programs of Study as a State Policy Mandate: A Longitudinal Study of the South Carolina Personal Pathways to Success Initiative. Final Technical Report: Major Findings and Implications

ERIC Educational Resources Information Center

Hammond, Cathy; Drew, Sam F.; Withington, Cairen; Griffith, Cathy; Swiger, Caroline M.; Mobley, Catherine; Sharp, Julia L.; Stringfield, Samuel C.; Stipanovic, Natalie; Daugherty, Lindsay

2013-01-01

This is the final technical report from the National Research Center for Career and Technical Education's (NRCCTE's) five-year longitudinal study of South Carolina's Personal Pathway to Success initiative, which was authorized by the state's Education and Economic Development Act (EEDA) in 2005. NRCCTE-affiliated researchers at the National…

40 CFR 264.114 - Disposal or decontamination of equipment, structures and soils.

Code of Federal Regulations, 2014 CFR

2014-07-01

... equipment, structures and soils. 264.114 Section 264.114 Protection of Environment ENVIRONMENTAL PROTECTION... of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soils must be properly disposed of or decontaminated unless otherwise specified in...

40 CFR 264.114 - Disposal or decontamination of equipment, structures and soils.

Code of Federal Regulations, 2012 CFR

2012-07-01

... equipment, structures and soils. 264.114 Section 264.114 Protection of Environment ENVIRONMENTAL PROTECTION... of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soils must be properly disposed of or decontaminated unless otherwise specified in...

40 CFR 264.114 - Disposal or decontamination of equipment, structures and soils.

Code of Federal Regulations, 2011 CFR

2011-07-01

... equipment, structures and soils. 264.114 Section 264.114 Protection of Environment ENVIRONMENTAL PROTECTION... of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soils must be properly disposed of or decontaminated unless otherwise specified in...

40 CFR 264.114 - Disposal or decontamination of equipment, structures and soils.

Code of Federal Regulations, 2010 CFR

2010-07-01

... equipment, structures and soils. 264.114 Section 264.114 Protection of Environment ENVIRONMENTAL PROTECTION... of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soils must be properly disposed of or decontaminated unless otherwise specified in...

40 CFR 264.114 - Disposal or decontamination of equipment, structures and soils.

Code of Federal Regulations, 2013 CFR

2013-07-01

... equipment, structures and soils. 264.114 Section 264.114 Protection of Environment ENVIRONMENTAL PROTECTION... of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soils must be properly disposed of or decontaminated unless otherwise specified in...

77 FR 43535 - Grantee Codes for Certified Radiofrequency Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-25

... Radiofrequency Equipment AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY: This document... certify new equipment. DATES: Effective August 24, 2012. FOR FURTHER INFORMATION CONTACT: Hugh Van Tuyl... may also be downloaded at: www.fcc.gov . Summary of the Order 1. The Commission operates an equipment...

48 CFR 9.501 - Definition.

Code of Federal Regulations, 2012 CFR

2012-10-01

... consultant when rendering— (1) Services excluded in subpart 37.2; (2) Routine engineering and technical services (such as installation, operation, or maintenance of systems, equipment, software, components, or...

48 CFR 9.501 - Definition.

Code of Federal Regulations, 2014 CFR

2014-10-01

... consultant when rendering— (1) Services excluded in subpart 37.2; (2) Routine engineering and technical services (such as installation, operation, or maintenance of systems, equipment, software, components, or...

48 CFR 9.501 - Definition.

Code of Federal Regulations, 2013 CFR

2013-10-01

... consultant when rendering— (1) Services excluded in subpart 37.2; (2) Routine engineering and technical services (such as installation, operation, or maintenance of systems, equipment, software, components, or...

48 CFR 9.501 - Definition.

Code of Federal Regulations, 2011 CFR

2011-10-01

... consultant when rendering— (1) Services excluded in subpart 37.2; (2) Routine engineering and technical services (such as installation, operation, or maintenance of systems, equipment, software, components, or...

[Testing and commercialization of a cotton stalk shredder and plow]. Technical progress report, October--December 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thacker, G.W.

1996-01-27

This quarterly report describes work on Task 1: Field test and sell prototype to Ellis Equipment, Ltd; Task 2: Design, build, and field test two prototypes; and Task 3: Produce and sell Pegasus to farmers. The equipment has been built to shred stalks, deeply till the soil, and prepare seedbeds for cotton plants. The equipment has been field tested in Australia and is currently being field tested in California and Arizona. Unexpected problems appeared with hard dry soils and this report describes improvements made.

MONTHLY PROGRESS REPORT ON THE FEASIBILITY AND DESIGN STUDY FOR COLLECTIVE PROTECTION EQUIPMENT FOR THE AN/MSG-4 SYSTEM. PHASEIA. Technical Report, April 15 to May 30, 1962 (1st Report). Financial Report, April 15 to May 30, 1962 (1st Report). GSG Report No. 1663.00/54

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glaser, J.

1962-06-19

Initial efforts devoted to development of layout drawings of the protective equipment from which detailed fabrication drawings are to be established are reported. Collective protection equipment design progress is reported on 400- and 800-cfm filter units and on protective entrances for shelters and vehicles. (J.R.D.)

On construction method of shipborne and airborne radar intelligence and related equipment knowledge graph

NASA Astrophysics Data System (ADS)

Hao, Ruizhe; Huang, Jian

2017-08-01

Knowledge graph construction in military intelligence domain is sprouting but technically immature. This paper presents a method to construct the heterogeneous knowledge graph in the field of shipborne and airborne radar and equipment. Based on the expert knowledge and the up-to-date Internet open source information, we construct the knowledge graph of radar characteristic information and the equipment respectively, and establish relationships between two graphs, providing the pipeline and method for the intelligence organization and management in the context of the crowding battlefields big data.

Bidirectional power converter control electronics

NASA Technical Reports Server (NTRS)

Mildice, J. W.

1987-01-01

The object of this program was to design, build, test, and deliver a set of control electronics suitable for control of bidirectional resonant power processing equipment of the direct output type. The program is described, including the technical background, and results discussed. Even though the initial program tested only the logic outputs, the hardware was subsequently tested with high-power breadboard equipment, and in the testbed of NASA contract NAS3-24399. The completed equipment is now operating as part of the Space Station Power System Test Facility at NASA Lewis Research Center.

Aeronautical engineering: A continuing bibliography with indexes (supplement 119)

NASA Technical Reports Server (NTRS)

1980-01-01

This bibliography lists 341 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1980. Abstracts on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems are presented. Research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles are also presented.

In Touch with Industry. ICAF Industry Studies 1999

DTIC Science & Technology

1999-01-01

Plant , Hamtramck, MI General Motors Corporation, Warren, MI General Motors Technical Center, Warren, MI General Motors Truck Assembly Plant , Pontiac...indicate that they cannot modernize plant equipment because workers lack the necessary skills to operate more advanced equipment. The National...construct new plants . General Motors is using M&S in new car designs to replace the clumsy clay models previously used. Now, when GM is making design

77 FR 37734 - Technical Standard Order (TSO) C-122a, Equipment That Prevent Blocked Channels Used in Two-Way...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... address, weekdays except federal holidays, between 8:30 a.m. and 4:30 p.m. The Director, Aircraft Certification Service, will consider all comments received on or before the closing date. Background In 1984... obsolescence of TSO-C122a equipment and the lack of industry interest in new TSO-C122a product designs. We...

Aeronautical engineering: A continuing bibliography with indexes (supplement 282)

NASA Technical Reports Server (NTRS)

1992-01-01

This bibliography lists 623 reports, articles, and other documents introduced into the NASA scientific and technical information system in Aug. 1992. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

Aeronautical Engineering: A Continuing Bibliography with Indexes

NASA Technical Reports Server (NTRS)

1995-01-01

This bibliography lists 193 reports, journal articles, and other documents introduced in the NASA scientific and technical system in Aug. 1995. Subject coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles

Aeronautical engineering: A continuing bibliography with indexes (supplement 324)

NASA Technical Reports Server (NTRS)

1995-01-01

This bibliography lists 149 reports, articles, and other documents introduced into the NASA scientific and technical information system in December 1995. Subject coverage includes engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

Dezhurov works with electronic equipment in Zvezda during Expedition Three

NASA Image and Video Library

2001-08-01

ISS003-E-5486 (August 2001) --- Cosmonaut Vladimir Dezhurov of Rosaviakosmos, Expedition Three flight engineer, works on electronic equipment behind a panel in the Zvezda Service Module. Please note: The date identifiers on some frames are not accurate due to a technical problem with one of the Expedition Three cameras. When a specific date is given in the text or description portion, it is correct.

Dezhurov works with electronic equipment in Zvezda during Expedition Three

NASA Image and Video Library

2001-08-01

ISS003-E-5489 (August 2001) --- Cosmonaut Vladimir Dezhurov of Rosaviakosmos, Expedition Three flight engineer, works on electronic equipment behind a panel in the Zvezda Service Module. Please note: The date identifiers on some frames are not accurate due to a technical problem with one of the Expedition Three cameras. When a specific date is given in the text or description portion, it is correct.

Aeronautical engineering: A continuing bibliography with indexes (supplement 313)

NASA Technical Reports Server (NTRS)

1995-01-01

This bibliography lists 179 reports, articles, and other documents introduced into the NASA scientific and technical information system in Jan. 1995. Subject coverage includes: engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

Aeronautical engineering: A continuing bibliography with indexes (supplement 310)

NASA Technical Reports Server (NTRS)

1994-01-01

This bibliography lists 29 reports, articles, and other documents introduced into the NASA scientific and technical information system in Nov. 1994. Subject coverage includes: engineering and theoretical aspects of design, construction,evaluation testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

TOPSALL #30

EPA Pesticide Factsheets

Technical product bulletin: this surface washing agent (a.k.a. SUPERALL #38) used in oil spill cleanups is recommended for cleaning petroleum fractions from decks, platforms, bilges, rigs, and other seagoing equipment.

SANDKLENE 950

EPA Pesticide Factsheets

Technical product bulletin: this surface washing agent used in oil spill cleanups on sand is most effective in enclosed systems using centrifuges, shearing devices, or similar high speed equipment to process material.