Science.gov

Sample records for equipment principles issues

  1. EPA USDA Agricultural Equipment Statement of Principles

    EPA Pesticide Factsheets

    The Agricultural Equipment Statement of Principles was developed jointly between EPA and USDA at the request of agriculture industry stakeholders seeking support for programs to assist farmers looking to invest in cleaner agricultural equipment

  2. Mentoring: Contemporary Principles and Issues.

    ERIC Educational Resources Information Center

    Bey, Theresa M., Ed.; Holmes, C. Thomas, Ed.

    In the spirit of educational reform efforts, an initiative exists to restructure the education of teachers through collaborative action, using mentoring to build alliances. This monograph, based on contemporary principles and issues of mentoring, presents ways to conceptualize the professional preparation and development of teachers. Following a…

  3. Issues Related to Equipment and the Dietary Guidelines for Americans.

    ERIC Educational Resources Information Center

    Nettles, Mary Frances

    A multi-year project was initiated to examine production equipment issues related to implementation of the Dietary Guidelines for Americans (DGA). The purposes of the research project were to determine foodservice directors' opinions regarding use and appropriateness of equipment in school foodservice, to identify the number and variety of menu…

  4. Equipment qualification issues research and resolution: Status report

    SciTech Connect

    Bonzon, L.L.; Wyant, F.J.; Bustard, L.D.; Gillen, K.T.

    1986-11-01

    Since its inception in 1975, the Qualification Testing Evaluation (QTE) Program has produced numerous results pertinent to equipment qualification issues. Many have been incorporated into Regulatory Guides, Rules, and industry practices and standards. This report summarizes the numerous reports and findings to date. Thirty separate issues are discussed encompassing three generic areas: accident simulation methods, aging simulation methods, and special topics related to equipment qualification. Each issue-specific section contains (1) a brief description of the issue, (2) a summary of the applicable research effort, and (3) a summary of the findings to date.

  5. Syllabus for an "Issues Approach" to Teaching Economic Principles.

    ERIC Educational Resources Information Center

    Leftwich, Richard H.; Sharp, Ansel M.

    1974-01-01

    This syllabus for an "issues" approach to an introductory economic principles course evolved out of three years of experimentation at Oklahoma State University. The syllabus covers 11 important social issues: population growth, agriculture, higher education, crime, pollution, health, poverty, discrimination, unemployment, inflation, and the energy…

  6. Principles of Managing Audiovisual Materials and Equipment. Second Revised Edition.

    ERIC Educational Resources Information Center

    California Univ., Los Angeles. Biomedical Library.

    This manual offers information on a wide variety of health-related audiovisual materials (AVs) in many formats: video, motion picture, slide, filmstrip, audiocassette, transparencies, microfilm, and computer assisted instruction. Intended for individuals who are just learning about audiovisual materials and equipment management, the manual covers…

  7. Principles of Managing Audiovisual Materials and Equipment. Second Revised Edition.

    ERIC Educational Resources Information Center

    California Univ., Los Angeles. Biomedical Library.

    This manual offers information on a wide variety of health-related audiovisual materials (AVs) in many formats: video, motion picture, slide, filmstrip, audiocassette, transparencies, microfilm, and computer assisted instruction. Intended for individuals who are just learning about audiovisual materials and equipment management, the manual covers…

  8. 30 CFR 18.91 - Electric equipment for which field approvals will be issued.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electric equipment for which field approvals... AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.91 Electric equipment for which field approvals will be issued. (a) Individual field approvals will be issued by MSHA...

  9. 30 CFR 18.91 - Electric equipment for which field approvals will be issued.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electric equipment for which field approvals... AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.91 Electric equipment for which field approvals will be issued. (a) Individual field approvals will be issued by MSHA...

  10. 30 CFR 18.4 - Electrical equipment for which approval is issued.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES General Provisions § 18.4 Electrical equipment for which approval is issued. An approval will be issued... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electrical equipment for which approval is...

  11. 30 CFR 18.4 - Electrical equipment for which approval is issued.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES General Provisions § 18.4 Electrical equipment for which approval is issued. An approval will be issued... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical equipment for which approval is...

  12. 30 CFR 18.4 - Electrical equipment for which approval is issued.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES General Provisions § 18.4 Electrical equipment for which approval is issued. An approval will be issued... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electrical equipment for which approval...

  13. 30 CFR 18.4 - Electrical equipment for which approval is issued.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES General Provisions § 18.4 Electrical equipment for which approval is issued. An approval will be issued... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electrical equipment for which approval...

  14. 30 CFR 18.4 - Electrical equipment for which approval is issued.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES General Provisions § 18.4 Electrical equipment for which approval is issued. An approval will be issued... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electrical equipment for which approval...

  15. Future issues including broadening the scope of the GLP principles.

    PubMed

    Liem, Francisca E; Lehr, Mark J

    2008-01-01

    When the principles of good laboratory practice (GLP) were drafted in 1982 by the Organisation for Economic Cooperation and Development (OECD) the electronic era was in its infant stages and many of the issues surrounding what may affect the environment and human health was not expected. Today, advances in technology for capturing and recording data for the reconstruction of a study are available and are being developed operating at speeds which could not have been known or understood in years past. Since that time, the United States Environmental Protection Agency (EPA) has required the conduct of additional studies in support of a pesticide registration in accordance with the GLP regulations. However, not all of these studies are required in other countries or may not require adherence to the principles of GLP. Companies are using computer models as virtual studies instead of inlife or bench type regulated research. Studies are often conducted at institutions of higher learning because of the academic expertise they offer. What is the overall impact advancing technology has on the principles of GLP? Are monitoring authorities (MAs) ready? The medical products field faces similar issues. Development and testing of these products and devices is being conducted similar to development and testing in the pesticide arena. To garner trust in mutual acceptance of data, each participating country must adhere to practices that ensure the highest standards of quality and integrity. The GLP inspector will need to have a good understanding of the science supporting the study conduct and the electronic systems that generate process and maintain study records.

  16. Halocarbon Recovery, Recycling, and Reclamation: Issues, Equipment, and Services

    DTIC Science & Technology

    1990-05-01

    oft. Sendc wmmim ft fgt burden euikies o an y o1w 50909t dt ml d 0 ft.ndki hInclling suggestons for reducing thi burden, lo V~hGWOn HsadquIVISNrs...specific functions is also included. It is based strictly on claims by the equipment manufacturers. D . METHODOLOGY Companies known to be involved in...Engineering Research Division Chief, Engineering and Services Systems Division / . , - "L( ’Robert W. Rettie D . Evans, Lt Col, USAF Project Officer Deputy

  17. Principles of commercially available pretreatment and feeding equipment for baled biomass

    SciTech Connect

    Koch, T.; Hummelshoej, R.M.

    1993-12-31

    During the last 15 years, there has been a growing interest in utilizing waste biomass for energy production in Denmark. Since 1990, it has been unlawful to burn surplus straw on open land. Before the year 2000, it is intended to utilize most of the 2--3 million tons of surplus straw as an energy resource. The type of plants that were built in the beginning were combustion plants for district heating. The feeding equipment for these plants has been developed to an acceptable standard. Later, combustion plants for combined heat and power production based on a steam turbine were introduced. This type of plant demands a much greater continuity in the fuel flow, and the consequences of minor discontinuities are to be dropped from the grid. Gasification and pyrolysis demands a high sealing ability of the feeding equipment, because of the explosive and poisonous gas in the plant and a need for a very high continuity in the fuel feed. The first plants were built with the equipment and experiences from the farming industries, which have a long tradition in working with biomass-handling. The experiences gained with this type of equipment were not very promising, and in the early eighties, a more industrial type of biomass-handling equipment was developed. This paper presents the principles of the heavy-duty biomass pretreatment and feeding equipment that was commercially available in Denmark in May, 1993.

  18. 30 CFR 18.5 - Equipment for which certification will be issued.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Equipment for which certification will be issued. 18.5 Section 18.5 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES...

  19. 30 CFR 18.5 - Equipment for which certification will be issued.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Equipment for which certification will be issued. 18.5 Section 18.5 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES...

  20. 30 CFR 18.5 - Equipment for which certification will be issued.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Equipment for which certification will be issued. 18.5 Section 18.5 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND...

  1. 30 CFR 18.5 - Equipment for which certification will be issued.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Equipment for which certification will be issued. 18.5 Section 18.5 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND...

  2. 30 CFR 18.5 - Equipment for which certification will be issued.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Equipment for which certification will be issued. 18.5 Section 18.5 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND...

  3. Environmental noise issues associated with medical facility HVAC equipment

    NASA Astrophysics Data System (ADS)

    Carnes, Ted N.; Pelton, Howard K.; Saenz, Daniel W.

    2003-10-01

    Medical facilities comprise a variety of types of buildings from research facilities to hospitals to professional office buildings to name but three. Many new hospitals are being located in close proximity to residential housing. Furthermore, as hospitals expand the buildings are closer to residential communities. Thus, the community noise aspects of these facilities are of even more importance than ever. This paper will examine how community noise intrusions can occur without proper planning, and how this can be avoided by knowing the community noise criteria, working closely with the design team to assist them with the proper planning and noise control design. Case histories will be presented that will include a hospital expansion with large rooftop equipment, new cooling towers and how these can be modeled as part of the overall hospital campus model to determine the community noise impact. In addition, a new chiller plant expansion adjacent to the residential areas will be examined, and how this can be modeled to show the various aspects of the community noise impact.

  4. CADDIS Volume 4. Data Analysis: Basic Principles & Issues

    EPA Pesticide Factsheets

    Use of inferential statistics in causal analysis, introduction to data independence and autocorrelation, methods to identifying and control for confounding variables, references for the Basic Principles section of Data Analysis.

  5. Requisition and Issue of Supplies and Equipment: Special Authorization and Procedures for Issues, Sales, and Loans

    DTIC Science & Technology

    2007-11-02

    a passenger forecast to be submitted to AMC–AF. (2) Providing Military Traffic Management Command ( MTMC ) an information copy of the passenger...r , M T M C , A T T N : MTMC –PTO–P, Washington, DC 20315–5050. (3) Issuing each passenger a DD Form 1482–1 (AMC–AF Transportation Authorization) for...assurance of Scout group integrity. Surface transportation will normally be used for travel within an overseas area. f. The responsibilities of the MTMC

  6. Regulatory issues associated with closure of the Hanford AX Tank Farm ancillary equipment

    SciTech Connect

    Becker, D.L.

    1998-09-02

    Liquid mixed, high-level radioactive waste has been stored in underground single-shell tanks at the US Department of Energy`s (DOE`s) Hanford Site. After retrieval of the waste from the single-shell tanks, the DOE will proceed with closure of the tank farm. The 241-AX Tank Farm includes four one-million gallon single-shell tanks in addition to sluice lines, transfer lines, ventilation headers, risers, pits, cribs, catch tanks, buildings, well and associated buried piping. This equipment is classified as ancillary equipment. This document addresses the requirements for regulatory close of the ancillary equipment in the Hanford Site 241-AX Tank Farm. The options identified for physical closure of the ancillary equipment include disposal in place, disposal in place after treatment, excavation and disposal on site in an empty single-shell tank, and excavation and disposal outside the AX Tank Farm. The document addresses the background of the Hanford Site and ancillary equipment in the AX Tank Farm, regulations for decontamination and decommissioning of radioactively contaminated equipment, requirements for the cleanup and disposal of radioactive wastes, cleanup and disposal requirements governing hazardous and mixed waste, and regulatory requirements and issues associated with each of the four physical closure options. This investigation was conducted by the Sandia National Laboratories, Albuquerque, New Mexico, during Fiscal Year 1998 for the Hanford Tanks Initiative Project.

  7. Training principles and issues for ultra-endurance athletes.

    PubMed

    Zaryski, Calvin; Smith, David J

    2005-06-01

    Ultra-endurance competition is defined as events that exceed than 6 hours in duration. The longer events rely on long-term preparation, sufficient nutrition, accommodation of environmental stressors, and psychologic toughness. Successful ultra-endurance performance is characterized by the ability to sustain a higher absolute speed for a given distance than other competitors. This can be achieved through a periodized training plan and by following key principles of training. Periodization is an organization of training into large, medium and small training blocks which are referred to as macro-, meso-, and microcycles, respectively. When the sequencing of training is correctly applied, athletes can achieve a high state of competition readiness and during the months of hard training, avoid the overtraining syndrome. A plan is executed in accordance with the following principles of training: all-around development, overload, specificity, individualization, consistent training, and structural tolerance. Training relies heavily on the athlete's tolerance to repetitive strain. Today's ultra-endurance athlete must also follow appropriate nutritional practices in order to recover and prepare for daily training and remain injury free and healthy. Rehydration after exercise, together with the timing and method of increased food intake to cope with heavy training, are essential for optimal performance. Furthermore, the treatment of soft tissue after training or racing is necessary to control inflammation.

  8. 75 FR 81708 - Notice of Decision To Issue Buy American Waivers for Foreign Object Debris (FOD) Detection Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-28

    ... (FOD) Detection Equipment AGENCY: Federal Aviation Administration (FAA), U.S. DOT. ACTION: Notice of... manufacturers of Foreign Object Debris (FOD) detection equipment that it was considering issuing waivers to Buy American requirements of 49 USC 50101 to foreign manufacturers of FOD detection equipment (Federal Register...

  9. Train and Equip Program for Syria: Authorities, Funding, and Issues for Congress

    DTIC Science & Technology

    2015-06-09

    for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE 09 JUN 2015 2...Matthew C. Weed . Train and Equip Program for Syria: Authorities, Funding, and Issues for Congress Congressional Research Service Contents FY2016...attacks by the Syrian regime, facilitating the provision of essential services, and stabilizing territory controlled by the opposition; defending

  10. Intellectual property and networked health information: issues and principles.

    PubMed Central

    Cate, F H

    1996-01-01

    Information networks offer enormous potential for improving the delivery of health care services, facilitating health-related decision-making, and contributing to better health. In addition, advanced information technologies offer important opportunities for new markets, targeted information products and services, greater accessibility, lower costs and prices, and more rapid and efficient distribution. Realizing the full potential of those information resources requires the resolution of significant intellectual property issues, some of which may be affected by special features of health information. For example, the government is a significant funder and originator of health-related information. In addition, much of that information is of great importance to the population and benefits not only individual users, but also employers, insurance companies, the government, and society as a whole. The government must therefore continue to provide particularly important health information to the public, and facilitate that information's accessibility and reliability, while avoiding unnecessary competition with private information providers. Congress and courts must modify or interpret current copyright law as necessary to guarantee that it does not interfere with innovation in tailored health information or exceed its constitutional boundaries and restrict access to information, as opposed to expression. Both producers and users of information must work with the government to educate the public about the availability of health information and the rights of and limitations upon users under copyright law. PMID:8826629

  11. U.S. Army and Marine Corps Equipment Requirements: Background and Issues for Congress

    DTIC Science & Technology

    2006-12-20

    Moss. 60 Richard Lardner, “Army Learns Lessons on Equipping Troops,” Tampa Tribune Mar. 16, 2004 and Ryan Lenz, “Unwilling to Wait, Some Buy Body Armor...68 Ryan Lenz and Jason Straizuso, “Troops Do Their Own Humvee Upgrades,” Houston Chronicle, Jan. 14, 2006. 69 For a representative view of...congressional concerns see John Donnelly, “Battlefield Armor a Hot Issue for the 109th Congress,” CQ Today, Oct. 20, 2005; Anne Plummer , “Hunter Wants to Know

  12. The effect of plant aging on equipment qualification and human performance issues related to license renewal

    SciTech Connect

    Gunther, W.E.; Higgins, J.C. ); Aggarwal, S.K. )

    1991-01-01

    The aging of nuclear power plants is one of the most important issues facing the nuclear industry worldwide. Aging encompasses as forms of degradation to nuclear power plant components, systems, and structures that result from exposure to environmental conditions or from operational stresses. Both the degradation from aging and actions taken to address the aging, such as increased maintenance and testing, can significantly impact human performance in the plant. Research into the causes and effects of aging as obtained through the assessment of operating experience and testing have raised questions regarding the adequacy of existing industry standards for addressing the concerns raised by this research. This paper discusses these issues, with particular emphasis in the area of equipment qualification and human performance.

  13. The effect of plant aging on equipment qualification and human performance issues related to license renewal

    SciTech Connect

    Gunther, W.E.; Higgins, J.C.; Aggarwal, S.K.

    1991-12-31

    The aging of nuclear power plants is one of the most important issues facing the nuclear industry worldwide. Aging encompasses as forms of degradation to nuclear power plant components, systems, and structures that result from exposure to environmental conditions or from operational stresses. Both the degradation from aging and actions taken to address the aging, such as increased maintenance and testing, can significantly impact human performance in the plant. Research into the causes and effects of aging as obtained through the assessment of operating experience and testing have raised questions regarding the adequacy of existing industry standards for addressing the concerns raised by this research. This paper discusses these issues, with particular emphasis in the area of equipment qualification and human performance.

  14. EQUIP: Implementing chronic care principles and applying formative evaluation methods to improve care for schizophrenia: QUERI Series

    PubMed Central

    Brown, Alison H; Cohen, Amy N; Chinman, Matthew J; Kessler, Christopher; Young, Alexander S

    2008-01-01

    Background This paper presents a case study that demonstrates the evolution of a project entitled "Enhancing QUality-of-care In Psychosis" (EQUIP) that began approximately when the U.S. Department of Veterans Affairs' Quality Enhancement Research Initiative (QUERI), and implementation science were emerging. EQUIP developed methods and tools to implement chronic illness care principles in the treatment of schizophrenia, and evaluated this implementation using a small-scale controlled trial. The next iteration of the project, EQUIP-2, was further informed by implementation science and the use of QUERI tools. Methods This paper reports the background, development, results and implications of EQUIP, and also describes ongoing work in the second phase of the project (EQUIP-2). The EQUIP intervention uses implementation strategies and tools to increase the adoption and implementation of chronic illness care principles. In EQUIP-2, these strategies and tools are conceptually grounded in a stages-of-change model, and include clinical and delivery system interventions and adoption/implementation tools. Formative evaluation occurs in conjunction with the intervention, and includes developmental, progress-focused, implementation-focused, and interpretive evaluation. Results Evaluation of EQUIP provided an understanding of quality gaps and how to address related problems in schizophrenia. EQUIP showed that solutions to quality problems in schizophrenia differ by treatment domain and are exacerbated by a lack of awareness of evidence-based practices. EQUIP also showed that improving care requires creating resources for physicians to help them easily implement practice changes, plus intensive education as well as product champions who help physicians use these resources. Organizational changes, such as the addition of care managers and informatics systems, were shown to help physicians with identifying problems, making referrals, and monitoring follow-up. In EQUIP-2, which is

  15. Electronics Principles Avionics Aerospace Ground Equipment (AGE) Career Ladder AFSCS 326X0A, B, C, D.

    DTIC Science & Technology

    1976-12-27

    This report summarizes the results of the administration of the Electronics Principles survey to airmen assigned to the Avionics Aerospace Ground Equipment (AGE) specialties, including 326XOA, Manually Operated Avionics AGE; 326XOB, Automatic Avionics AGE; 326XOC, F/RF-4 Peculiar AGE, and 326XOD, A-7D Avionics AGE. The report gives a detailed listing of the technical tasks and knowledge needed to

  16. Framework for Asynchronous Discussion Design Decisions: Applied Principles from Special Issue Authors

    ERIC Educational Resources Information Center

    Grabowski, Barbara L.

    2011-01-01

    After a discussion of the state of both misaligned and informative online and distance education research, the authors in this special issue (hereafter called the collective) extract evidence-based principles about strategies that work. Both are addressed in this article. First, their criticisms centered on the value of comparative research. Those…

  17. Environmental issues and management strategies for waste electronic and electrical equipment.

    PubMed

    Townsend, Timothy G

    2011-06-01

    Issues surrounding the impact and management of discarded or waste electronic and electrical equipment (WEEE) have received increasing attention in recent years. This attention stems from the growing quantity and diversity of electronic and electrical equipment (EEE) used by modern society, the increasingly rapid turnover of EEE with the accompanying burden on the waste stream, and the occurrence of toxic chemicals in many EEE components that can pose a risk to human and environmental health if improperly managed. In addition, public awareness of the WEEE or "e-waste" dilemma has grown in light of popular press features on events such as the transition to digital television and the exportation of WEEE from the United States and other developed countries to Africa, China, and India, where WEEE has often not been managed in a safe manner (e.g., processed with proper safety precautions, disposed of in a sanitary landfill, combusted with proper air quality procedures). This paper critically reviews current published information on the subject of WEEE. The definition, magnitude, and characteristics of this waste stream are summarized, including a detailed review of the chemicals of concern associated with different components and how this has changed and continues to evolve over time. Current and evolving management practices are described (e.g., reuse, recycling, incineration, landfilling). This review discusses the role of regulation and policies developed by governments, institutions, and product manufacturers and how these initiatives are shaping current and future management practices.

  18. 30 CFR 18.91 - Electric equipment for which field approvals will be issued.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.91 Electric equipment... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric equipment for which field approvals...

  19. 30 CFR 18.91 - Electric equipment for which field approvals will be issued.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.91 Electric equipment... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electric equipment for which field approvals...

  20. Developing registries of volunteers: key principles to manage issues regarding personal information protection.

    PubMed

    Lévesque, Emmanuelle; Leclerc, Dominic; Puymirat, Jack; Knoppers, Bartha Maria

    2010-11-01

    Much biomedical research cannot be performed without recruiting human subjects. Increasingly, volunteer registries are being developed to assist researchers with this challenging task. Yet, volunteer registries raise confidentiality issues. Having recently developed a registry of volunteers, the authors searched for normative guidance on how to implement the principle of confidentiality. The authors found that the protection of confidentiality in registries are based on the 10 key elements which are elaborated in detail in the Canadian Standards Association Model Code. This paper describes how these 10 detailed key principles can be used during the developmental stages of volunteer registries.

  1. A Canadian framework for applying the precautionary principle to public health issues.

    PubMed

    Weir, Erica; Schabas, Richard; Wilson, Kumanan; Mackie, Chris

    2010-01-01

    The precautionary principle has influenced environmental and public health policy. It essentially states that complete evidence of a potential risk is not required before action is taken to mitigate the effects of the potential risk. The application of precaution to public health issues is not straightforward and could paradoxically cause harm to the public's health when applied inappropriately. To avoid this, we propose a framework for applying the precautionary principle to potential public health risks. The framework consists of ten guiding questions to help establish whether a proposed application of the precautionary principle on a public health matter is based on adequacy of the evidence of causation, severity of harm and acceptability of the precautionary measures.

  2. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... principles issued by the Financial Accounting Standards Board (FASB). 1200.2 Section 1200.2 Transportation... COMMERCE ACT § 1200.2 Adoption of generally accepted accounting principles issued by the Financial... Financial Accounting Standards by the FASB, and provided that the Office of Economics,...

  3. 12 CFR 223.23 - What valuation and timing principles apply to purchases of and investments in securities issued...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ....23 What valuation and timing principles apply to purchases of and investments in securities issued by... 12 Banks and Banking 3 2010-01-01 2010-01-01 false What valuation and timing principles apply to purchases of and investments in securities issued by an affiliate? 223.23 Section 223.23 Banks and...

  4. Research council leaders issue merit review principles, establish Global Research Council

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    2012-05-01

    The directors of research councils from 41 countries, along with representatives from the European Commission and other organizations, issued a set of merit review principles and established a virtual Global Research Council following a 14-15 May Global Summit on Merit Review that was hosted by the U.S. National Science Foundation (NSF). The merit review principles cover six key areas: expert assessment by reviewers; transparency regarding decisions; impartiality of proposal assessments; appropriateness of the review process; confidentiality in handling proposals; and integrity and ethical consideration, which was deemed paramount to the review process. According to NSF, the merit review principles statement was developed with two primary objectives. “First, the worldwide agreement on core, high-level principles will foster international cooperation between funding agencies that support the scientific research community. Second, for those countries that are developing new funding agencies, the principles provide a global consensus on the key elements necessary for a rigorous and transparent review system.”

  5. Integrating rock mechanics issues with repository design through design process principles and methodology

    SciTech Connect

    Bieniawski, Z.T.

    1996-04-01

    A good designer needs not only knowledge for designing (technical know-how that is used to generate alternative design solutions) but also must have knowledge about designing (appropriate principles and systematic methodology to follow). Concepts such as {open_quotes}design for manufacture{close_quotes} or {open_quotes}concurrent engineering{close_quotes} are widely used in the industry. In the field of rock engineering, only limited attention has been paid to the design process because design of structures in rock masses presents unique challenges to the designers as a result of the uncertainties inherent in characterization of geologic media. However, a stage has now been reached where we are be able to sufficiently characterize rock masses for engineering purposes and identify the rock mechanics issues involved but are still lacking engineering design principles and methodology to maximize our design performance. This paper discusses the principles and methodology of the engineering design process directed to integrating site characterization activities with design, construction and performance of an underground repository. Using the latest information from the Yucca Mountain Project on geology, rock mechanics and starter tunnel design, the current lack of integration is pointed out and it is shown how rock mechanics issues can be effectively interwoven with repository design through a systematic design process methodology leading to improved repository performance. In essence, the design process is seen as the use of design principles within an integrating design methodology, leading to innovative problem solving. In particular, a new concept of {open_quotes}Design for Constructibility and Performance{close_quotes} is introduced. This is discussed with respect to ten rock mechanics issues identified for repository design and performance.

  6. Basic principles of dental office logistics: organizing dental supplies and equipment for optimal accessibility.

    PubMed

    Mamoun, John

    2012-01-01

    To maximize office production, dentists should continuously perform treatment-related tasks throughout the workday. To this end, the office should logically organize and store dental instruments, disposables, materials, handpieces, and small equipment to optimize accessibility of these items at the moment when the dentist needs them. The office needs multiple copies of these items to prevent their inaccessibility during the workday due to breakdown, inventory depletion, or lack of a sterilized copy of the item when needed. Staff should know where all items are located in the office at all times to minimize the time needed to search for them. This article describes how to organize dental items in an office for optimal accessibility to the dentist during procedures.

  7. Design principles and issues of rights expression languages for digital rights management

    NASA Astrophysics Data System (ADS)

    Wang, Xin

    2005-07-01

    Digital rights management (DRM) provides a unified approach to specifying, interpreting, enforcing and managing digital rights throughout the entire life cycle of digital assets. Using a declarative rights expression language (REL) for specifying rights and conditions in the form of licenses, as opposite to some other approaches (such as data structures and imperative languages), has been considered and adopted as a superior technology for implementing effective, interoperable and scalable DRM systems. This paper discusses some principles and issues for designing RELs, based on the experiences of developing a family of REL"s (DPRL, XrML 1.x, XrML 2.0 and MPEG REL). It starts with an overview of a family tree of the past and current REL"s, and their development history, followed by an analysis of their data models and a comparison with access-control oriented models. It then presents a number of primary design principles such as syntactic and semantic un-ambiguity, system interoperability, expressiveness in supporting business models and future extensibility, and discusses a number of key design issues such as maintaining stateful information, multi-tier issuance of rights, meta rights, identification of individual and aggregate objects, late-binding of to-beidentified entities, as well as some advanced ones on revocation and delegation of rights. The paper concludes with some remarks on REL profiling and extension for specific application domains.

  8. Basic concepts and issues: a primer on distribution and sales representative agreements in the medical device and durable medical equipment industries.

    PubMed

    Burow, Heiko E; Kolls, Raymond C

    2006-01-01

    Counsel for a manufacturer of medical devices or durable medical equipment must have working knowledge of various legal disciplines to draft contracts with intermediaries (sales representatives and distributors) for the marketing and sale of the manufacturer's products. If the manufacturer wishes to sell its products abroad, counsel must become familiar with the laws and business practices of the target country, and methods of gaining access to the foreign market. This Article gives readers an overview of the applicable legal principles, under U.S. and foreign laws, in the areas of agency, contracts, healthcare regulation, consumer protection, intellectual property protection, and dealer protection. To aid counsel in drafting intermediary agreements, specific contractual terms and issues are explored in depth, including: appointment clauses, performance provisions, provisions concerning pricing and payment, protective clauses (shielding the manufacturer from liability), term and termination provisions, independent contractor clauses, export control clauses, recordkeeping and audit provisions, choice of law clauses, and dispute resolution clauses.

  9. Staff experiences of providing maternity services in rural southern Tanzania – a focus on equipment, drug and supply issues

    PubMed Central

    2013-01-01

    Background The poor maintenance of equipment and inadequate supplies of drugs and other items contribute to the low quality of maternity services often found in rural settings in low- and middle-income countries, and raise the risk of adverse patient outcomes through delaying care provision. We aim to describe staff experiences of providing maternal and neonatal care in rural health facilities in Southern Tanzania, focusing on issues related to equipment, drugs and supplies. Methods Focus group discussions and in-depth interviews were conducted with different staff cadres from all facility levels in order to explore experiences and views of providing maternity care in the context of poorly maintained equipment, and insufficient drugs and other supplies. A facility survey quantified the availability of relevant items. Results The facility survey, which found many missing or broken items and frequent stock outs, corroborated staff reports of providing care in the context of missing or broken care items. Staff reported increased workloads, reduced morale, difficulties in providing optimal maternity care, and carrying out procedures with potential health risks to themselves as a result. Conclusions Inadequately stocked and equipped facilities compromise the health system’s ability to reduce maternal and neonatal mortality and morbidity by affecting staff personally and professionally, which hinders the provision of timely and appropriate interventions. Improving stock control and maintaining equipment could benefit mothers and babies, not only through removing restrictions to the availability of care, but also through improving staff working conditions. PMID:23410228

  10. Staff experiences of providing maternity services in rural southern Tanzania - a focus on equipment, drug and supply issues.

    PubMed

    Penfold, Suzanne; Shamba, Donat; Hanson, Claudia; Jaribu, Jennie; Manzi, Fatuma; Marchant, Tanya; Tanner, Marcel; Ramsey, Kate; Schellenberg, David; Schellenberg, Joanna Armstrong

    2013-02-14

    The poor maintenance of equipment and inadequate supplies of drugs and other items contribute to the low quality of maternity services often found in rural settings in low- and middle-income countries, and raise the risk of adverse patient outcomes through delaying care provision. We aim to describe staff experiences of providing maternal and neonatal care in rural health facilities in Southern Tanzania, focusing on issues related to equipment, drugs and supplies. Focus group discussions and in-depth interviews were conducted with different staff cadres from all facility levels in order to explore experiences and views of providing maternity care in the context of poorly maintained equipment, and insufficient drugs and other supplies. A facility survey quantified the availability of relevant items. The facility survey, which found many missing or broken items and frequent stock outs, corroborated staff reports of providing care in the context of missing or broken care items. Staff reported increased workloads, reduced morale, difficulties in providing optimal maternity care, and carrying out procedures with potential health risks to themselves as a result. Inadequately stocked and equipped facilities compromise the health system's ability to reduce maternal and neonatal mortality and morbidity by affecting staff personally and professionally, which hinders the provision of timely and appropriate interventions. Improving stock control and maintaining equipment could benefit mothers and babies, not only through removing restrictions to the availability of care, but also through improving staff working conditions.

  11. Accounting Issues: An Essay Series Part IV--Property, Plant, & Equipment

    ERIC Educational Resources Information Center

    Laux, Judy

    2007-01-01

    This fourth article in a series of theoretical essays intended to supplement the introductory financial accounting course is dedicated to the topic of property, plant, and equipment (PP&E), including both the accounting treatment and its related conceptual connections. The paper also addresses the measurement dilemmas, scandalous accounting…

  12. Tools and Equipment in Nontraditional Spaces: Safety and Liability Issues. Safety Spotlight

    ERIC Educational Resources Information Center

    Love, Tyler S.; Roy, Ken R.

    2017-01-01

    "Safety Spotlight" encourages the submission of questions from Technology and Engineering (T&E) Educators, and this month's question involves the risks of placing hazardous equipment (e.g., 3D printer, laser cutter, CNC router, etc.) in a non-technology & engineering lab under the supervision of teachers not certified to teach…

  13. Accounting Issues: An Essay Series Part IV--Property, Plant, & Equipment

    ERIC Educational Resources Information Center

    Laux, Judy

    2007-01-01

    This fourth article in a series of theoretical essays intended to supplement the introductory financial accounting course is dedicated to the topic of property, plant, and equipment (PP&E), including both the accounting treatment and its related conceptual connections. The paper also addresses the measurement dilemmas, scandalous accounting…

  14. [Issues of occupational health in the aluminium plant with superpower equipment].

    PubMed

    Fedorchuk, A A; Roslyĭ, O F; Slyshkina, T V; Plotko, É G; Lemiasev, M F

    2012-01-01

    Purpose of the research is to provide a hygienic assessment of working conditions at aluminum plants equipped with Central working prebaked (CWPB) cells operating at currents of 330 kA. The studies have indicated that the leading occupational exposures, the levels of which exceed the national standards, are: fluorine compound in the air of work area; unfavorable microclimate, constant magnetic field, the severity of the labour. According to the general hygienic assessment, with account of combined influence harmful occupational factors, the working conditions are attributed to 1-2 degrees of the 3 class of harmful working conditions, that conform to the small (moderate) and significant occupational risk.

  15. Targeting as a Mode of Science Communication: Principles, Issues and a Practical Example

    NASA Astrophysics Data System (ADS)

    Holland, G. J.; Vigh, J. L.

    2011-12-01

    Today's media landscape contains a rich and diverse range of communications opportunities. New media, such as the internet, blogosphere and social networks, are complementing, supplementing and also replacing the traditional mass media communications through print, radio and television. This diversification certainly contains pitfalls and difficulties as has been demonstrated in the Climategate affair. But there are also real opportunities for utilizing the diversity to provide targeted science communications that are framed in the context of the specific group of interest. That such targeting of audience attitudes and beliefs is an important key to effective science communications has been demonstrated by, for example, Leiserowitz, Maibach et al (2009). This approach does require an understanding of the audience and a careful framing of the message in terms familiar to the targeted group. Here many factors come into play, including: including immediacy, economics, culture, community leaders, emotional framing, and ideological filters. In this talk we shall elaborate on the principles, issues and opportunities. A practical example of working with the religious community on communicating the science of climate change will also be presented. This will include the approach adopted, progress to date and the lessons learnt.

  16. [The issues and basic principles of training of physicians of clinical laboratory diagnostics].

    PubMed

    Morozova, V T; Naumova, E V

    2012-07-01

    The article considers the main positions concerning the clinical laboratory diagnostics as an independent clinical specialty and the principles of professional training and improvement of specialists. The basic issues complicating the training and improvement of personnel to be kept in line with actual needs of laboratory service of public health system are discussed. Among them are the availability of laboratory academic sub disciplines demanding a profound special theoretical education and technical skills; the need to account in the process of professional training the variety of forms, sizes and types of laboratory structures in different medical institutions; the need of special training programs for numerous specialists with non-medical basic education. The combination of the present system of postgraduate training of specialists on chairs of state educational organizations with initiative involvement of specialists in various public forms of permanent professional improvement (professional scientific societies meetings, research conferences, internet seminars, etc.) is supported Along with a positive appraisal of the existing system of training in the state educational institutions and corresponding regulation documents, a critique is expressed regarding certain actual documents which improperly limit the administrative functions of physicians of clinical laboratory diagnostics and complicate training of bacteriologists for clinical laboratories.

  17. Basic principles of flight test instrumentation engineering, volume 1, issue 2

    NASA Astrophysics Data System (ADS)

    Borek, Robert W., Sr.; Pool, A.

    1994-03-01

    Volume 1 of the AG 300 series on 'Flight Test Instrumentation' gives a general introduction to the basic principles of flight test instrumentation. The other volumes in the series provide more detailed treatments of selected topics on flight test instrumentation. Volume 1, first published in 1974, has been used extensively as an introduction for instrumentation courses and symposia, as well as being a reference work on the desk of most flight test and instrumentation engineers. It is hoped that this second edition, fully revised, will be used with as much enthusiasm as the first edition. In this edition a flight test system is considered to include both the data collection and data processing systems. In order to obtain an optimal data flow, the overall design of these two subsystems must be carefully matched; the detail development and the operation may have to be done by separate groups of specialists. The main emphasis is on the large automated instrumentation systems used for the initial flight testing of modern military and civil aircraft. This is done because there, many of the problems, which are discussed here, are more critical. It does not imply, however, that smaller systems with manual data processing are no longer used. In general, the systems should be designed to provide the required results at the lowest possible cost. For many tests which require only a few parameters, relatively simple systems are justified, especially if no complex equipment is available to the user. Although many of the aspects discussed in this volume apply to both small and large systems, aspects of the smaller systems are mentioned only when they are of special interest. The volume has been divided into three main parts. Part 1 defines the main starting points for the design of a flight test instrumentation system, as seen from the points of view of the flight test engineer and the instrumentation engineer. In Part 2 the discussion is concentrated on those aspects which apply

  18. Basic principles of flight test instrumentation engineering, volume 1, issue 2

    NASA Technical Reports Server (NTRS)

    Borek, Robert W., Sr. (Editor); Pool, A. (Editor)

    1994-01-01

    Volume 1 of the AG 300 series on 'Flight Test Instrumentation' gives a general introduction to the basic principles of flight test instrumentation. The other volumes in the series provide more detailed treatments of selected topics on flight test instrumentation. Volume 1, first published in 1974, has been used extensively as an introduction for instrumentation courses and symposia, as well as being a reference work on the desk of most flight test and instrumentation engineers. It is hoped that this second edition, fully revised, will be used with as much enthusiasm as the first edition. In this edition a flight test system is considered to include both the data collection and data processing systems. In order to obtain an optimal data flow, the overall design of these two subsystems must be carefully matched; the detail development and the operation may have to be done by separate groups of specialists. The main emphasis is on the large automated instrumentation systems used for the initial flight testing of modern military and civil aircraft. This is done because there, many of the problems, which are discussed here, are more critical. It does not imply, however, that smaller systems with manual data processing are no longer used. In general, the systems should be designed to provide the required results at the lowest possible cost. For many tests which require only a few parameters, relatively simple systems are justified, especially if no complex equipment is available to the user. Although many of the aspects discussed in this volume apply to both small and large systems, aspects of the smaller systems are mentioned only when they are of special interest. The volume has been divided into three main parts. Part 1 defines the main starting points for the design of a flight test instrumentation system, as seen from the points of view of the flight test engineer and the instrumentation engineer. In Part 2 the discussion is concentrated on those aspects which apply

  19. Environmental Decision Making on Acid Mine Drainage Issues in South Africa: An Argument for the Precautionary Principle.

    PubMed

    Morodi, T J; Mpofu, Charles

    2017-06-28

    This paper examines the issue of acid mine drainage in South Africa and environmental decision making processes that could be taken to mitigate the problem in the context of both conventional risk assessment and the precautionary principle. It is argued that conventional risk assessment protects the status quo and hence cannot be entirely relied upon as an effective tool to resolve environmental problems in the context of South Africa, a developing country with complex environmental health concerns. The complexity of the environmental issues is discussed from historical and political perspectives. An argument is subsequently made that the precautionary principle is an alternative tool, and its adoption can be used to empower local communities. This work, therefore, adds to new knowledge by problematising conventional risk assessment and proposing the framing of the acid mine drainage issues in a complex and contextual scenario of a developing country-South Africa.

  20. Aquatic Equipment Information.

    ERIC Educational Resources Information Center

    Sova, Ruth

    Equipment usually used in water exercise programs is designed for variety, intensity, and program necessity. This guide discusses aquatic equipment under the following headings: (1) equipment design; (2) equipment principles; (3) precautions and contraindications; (4) population contraindications; and (5) choosing equipment. Equipment is used…

  1. Resolution of Unresolved Safety Issue A-48, Hydrogen control measures and effects of hydrogen burns on safety equipment

    SciTech Connect

    Ferrell, C.M.; Soffer, L.

    1989-09-01

    Unresolved Safety Issue (USI) A-48 arose as a result of the large amount of hydrogen generated and burned within containment during the Three Mile Island accident. This issue covers hydrogen control measures for recoverable degraded-core accidents for all boiling-water reactors (BWRs) and those pressurized-water reactors (PWRs) with ice-condenser containments. The Commission and the nuclear industry have sponsored extensive research in this area, which has led to significant revision of the Commission's hydrogen control regulations, given in Title 10, Code of Federal Regulations, Part 50 (10 CFR 50), Section 50.44. BWRs having Mark I and II containments are presently required to operate with inerted containment atmospheres that effectively prevent hydrogen combustion. BWRs with Mark III containments and PWRs with ice-condenser containments are now required to be equipped with hydrogen control systems to protect containment integrity and safety systems inside containment. Industry has chosen to use hydrogen igniter systems to burn hydrogen produced in a controlled fashion to prevent damage. An independent review by a Committee of the National Research Council concluded that, for most accident scenarios, current regulatory requirements make it highly unlikely that hydrogen detonation would be the cause of containment failure. On the basis of the extensive research effort conducted and current regulatory requirements, including their implementation, the staff concludes that no new regulatory guidance on hydrogen control for recoverable degraded-core accidents for these types of plants is necessary and that USI A-48 is resolved.

  2. Issues in Applying Bio-Inspiration, Cognitive Critical Mass and Developmental-Inspired Principles to Advanced Intelligent Systems

    NASA Astrophysics Data System (ADS)

    Berg-Cross, Gary; Samsonovich, Alexei V.

    This Chapter summarizes ideas presented at the special PerMIS 2008 session on Biological Inspiration for Intelligent Systems. Bio-inspired principles of development and evolution are a special part of the bio-models and principles that can be used to improve intelligent systems and related artifacts. Such principles are not always explicit. They represent an alternative to incremental engineering expansion using new technology to replicate human intelligent capabilities. They are more evident in efforts to replicate and produce a “critical mass” of higher cognitive functions of the human mind or their emergence through cognitive developmental robotics (DR) and self-regulated learning (SRL). DR approaches takes inspiration from natural processes, so that intelligently engineered systems may create solutions to problems in ways similar to what we hypothesize is occurring with biologics in their natural environment. This Chapter discusses how an SRL-based approach to bootstrap a “critical mass” can be assessed by a set of cognitive tests. It also uses a three-level bio-inspired framework to illustrate methodological issues in DR research. The approach stresses the importance of using bio-realistic developmental principles to guide and constrain research. Of particular importance is keeping models and implementation separate to avoid the possible of falling into a Ptolemaic paradigm that may lead to endless tweaking of models. Several of Lungarella's design principles [36] for developmental robotics are discussed as constraints on intelligence as it emerges from an ecologically balanced, three-way interaction between an agents' control systems, physical embodiment, and the external environment. The direction proposed herein is to explore such principles to avoid slavish following of superficial bio-inspiration. Rather we should proceed with a mature and informed developmental approach using developmental principles based on our incremental understanding of how

  3. Medical Issues: Equipment

    MedlinePlus

    ... they are placed in an infant car seat. Cough Assist A cough machine forces air into the lungs at a ... This action can help produce a more effective cough, which maintains airway clearance. E-Z-ON Modified ...

  4. Equipment review: New techniques for cardiac output measurement – oesophageal Doppler, Fick principle using carbon dioxide, and pulse contour analysis

    PubMed Central

    Berton, Christine; Cholley, Bernard

    2002-01-01

    Measuring cardiac output is of paramount importance in the management of critically ill patients in the intensive care unit and of 'high risk' surgical patients in the operating room. Alternatives to thermodilution are now available and are gaining acceptance among practitioners who have been trained almost exclusively in the use of the pulmonary artery catheter. The present review focuses on the principles, advantages and limitations of oesophageal Doppler, Fick principle applied to carbon dioxide, and pulse contour analysis. No single method stands out or renders the others obsolete. By making cardiac output easily measurable, however, these techniques should all contribute to improvement in haemodynamic management. PMID:12133181

  5. UV x-ray free electron lasers through high-gain single pass amplifier: Basic principles and issues

    SciTech Connect

    Kim, K.J.

    1994-09-01

    The author reviews the basic principles of high gain free electron laser amplifier in single pass configuration for generation of intense, tunable radiation for wavelength shorter than 1,000 {angstrom}. Two schemes are discussed: for wavelength region between 1,000--100 {angstrom}, the high gain harmonic generation of a coherent input radiation can be used. For x-ray wavelength as short as a few {angstrom}, the self-amplified spontaneous emission is currently the only known free electron laser scheme. The author also presents a brief introduction of various key issues in realizing these schemes, which will be discussed in detail in other papers in these proceedings.

  6. Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design

    PubMed Central

    Lowry, Svetlana Z; Patterson, Emily S

    2014-01-01

    Background There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among “non-typical” HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from “stereotypical” users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. Objective The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Methods Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Results Design principles that

  7. Scientific issues related to Codex Alimentarius goals: a review of principles, with examples.

    PubMed

    Somogyi, Arpad; Hathcock, John; Biesalski, Hans Konrad; Blumberg, Jeffrey B; Antoine, Jean-Michel; Edwards, Gareth; Prock, Peter

    2011-06-01

    The Codex Alimentarius provides the food standards and guidelines recognized by the World Trade Organization as the primary authority for use in settlement of related trade disputes. Codex bases its decisions primarily on scientific principles and evidence, although other legitimate factors such as economic and societal values may be considered. Codex has two primary aims: to protect consumers' health and assure fair practices in food trade. Codex documents may provide templates for individual nations but are not binding for domestic policies. Despite many advances over the last couple of decades, misunderstandings and controversies have interfered with important aspects of progress which Codex needs to accomplish, especially in the areas of claims of benefits related to food or nutrient consumption and the establishment of the safety of these items. Claims for health benefits should be based on the totality of available scientific evidence, including observational data collected from large populations as well as the results from randomized clinical trials. Safety should be evaluated by risk assessment on high quality experimental data, with anecdotal information having a lesser role. Regulatory policy would be improved if "history of safe use" were to be better defined and described. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. Three-dimensional display technologies of recent interest: principles, status, and issues [Invited].

    PubMed

    Hong, Jisoo; Kim, Youngmin; Choi, Hee-Jin; Hahn, Joonku; Park, Jae-Hyeung; Kim, Hwi; Min, Sung-Wook; Chen, Ni; Lee, Byoungho

    2011-12-01

    Recent trends in three-dimensional (3D) display technologies are very interesting in that both old-fashioned and up-to-date technologies are being actively investigated together. The release of the first commercially successful 3D display product raised new research topics in stereoscopic display. Autostereoscopic display renders a ray field of a 3D image, whereas holography replicates a wave field of it. Many investigations have been conducted on the next candidates for commercial products to resolve existing limitations. Up-to-date see-through 3D display is a concept close to the ultimate goal of presenting seamless virtual images. Although it is still far from practical use, many efforts have been made to resolve issues such as occlusion problems.

  9. High performance computing equipment for environmental remediation modeling and first principles simulation of materials properties. Final report

    SciTech Connect

    Glimm, J.; Lindquist, W.B.

    1994-08-01

    A 56-node Intel Paragon parallel computer was purchased with major support provided by this grant, and installed in July, 1993, in the Center for Scientific Computing, Department of Applied Mathematics and Statistics, SUNY - Stony Brook. The targeted research funded by this proposal consists of work to support the Stony Brook and Brookhaven National Laboratory contributions to the Partnership in Computational Science (PICS) program; namely environmental remediation modeling of ground water transport, Car-Parrinello first principles molecular dynamics calculations, and the supporting development of the parallelized VolVis graphics package. Research accomplishments to date for this targeted research is discussed in {section}2. This computer has also enabled or enhanced many other projects conducted both by the Center for Scientific Computing and by the Department of Applied Mathematics and Statistics. These other projects include two- and three-dimensional gas dynamics using front tracking, other molecular dynamics applications, kidney modeling, and global optimization techniques applied to DNA-protein interactions. Technical summaries of these additional projects are presented in {section}3. The targeted research includes users from the Departments of Applied Mathematics and Computer Science at SUNY - Stony Brook, as well as staff scientists from the Departments of Physics and Applied Sciences at Brookhaven National Laboratory. The additional projects involve university faculty from the above departments as well as the Departments of Physics and Chemistry. Regular users of this machine currently include 10 faculty members, 8 postdoctoral fellows, more that 12 PhD students and approximately 8 staff members from BNL.

  10. Designing health care environments: Part I. Basic concepts, principles, and issues related to evidence-based design.

    PubMed

    Cesario, Sandra K

    2009-06-01

    A 2001 Institute of Medicine report captured the nation's attention regarding the dangers that can result from the health care environment. This report, fueled by the need for new facilities to be constructed, led to an explosion of research that now links the physical structure and design of health care facilities to the health and well-being of patients, nurses, other health care workers, and visitors. Continuing nursing education that highlights the importance of evidence-based design has been associated with measurable improvement in health care facilities' clinical outcomes, economic performance, employee productivity, customer satisfaction, and cultural congruency. Three major categories of outcomes can be impacted by evidence-based design: stress reduction, safety, and overall health care quality and ecology. In this article, Part I of a two-part series, the basic concepts, principles, and issues related to evidence-based design are introduced. Part II will describe continuing education programs available for nurses.

  11. Principles, processes, and puzzles of social cognition: an introduction for the special issue on social cognitive neuroscience.

    PubMed

    Lieberman, Matthew D

    2005-12-01

    This article introduces the special issue of NeuroImage focused on social cognitive neuroscience. Social psychology has a rich history of making sense of the often paradoxical aspects of social cognition and the social world. This article reviews the principles, processes, and puzzles of social cognition and behavior that have been examined by social psychologists for decades. Five principles of social cognition and behavior are reviewed including: (1) the power of the situation over behavior, (2) blindness for situational influences, (3) social perception and self-perception are constructive processes, (4) blindness for the constructed nature of social and self-perception, and (5) self-processes are social. Four processes of social cognition are reviewed including: (1) cognitive architecture; (2) automaticity and control; (3) motivated reasoning; and (4) accessibility, frames, and expectations. Finally, five areas of social cognition that contain enduring puzzles are described including (1) the self, (2) attitudes, (3) reflective social cognition, (4) automatic social cognition, and (5) social motives. In several of the areas of study reviewed, cognitive neuroscience is well positioned to make important contributions to these research traditions either by allowing for new tests of hypotheses or by allowing for unobtrusive measurement of social cognitive processes.

  12. Direct-to-consumer online genetic testing and the four principles: an analysis of the ethical issues.

    PubMed

    Wasson, Katherine; Cook, E David; Helzlsouer, Kathy

    2006-01-01

    The development of genetic tests marketed and sold direct-to-consumers (DTC) via the internet raises moral concerns and debate about their appropriateness and ethical and clinical significance. These tests are offered for a wide range of diseases and conditions, and the mutations have variable penetrance and associated risk. A number of these tests lack data on their accuracy and reliability, making interpretation of results difficult. DTC genetic testing is undertaken outside the context of the physician-patient relationship and may lack appropriate individual and family genetic counseling, leaving the consumer vulnerable to potential harms, such as misinterpretation of results, including false positive or false reassurance, with limited or no benefits. Beauchamp and Childress's four principles of biomedical ethics provide a framework for analyzing the ethical issues raised by DTC genetic testing. We argue that the potential harms outweigh the potential benefits of such tests, that respect for autonomy should be limited in light of potential harm from DTC testing, and that the availability of genetic testing over the internet may be considered unfair and unjust and affect resource allocation by placing an unfair burden on primary care physicians. In light of the moral issues posed by these tests, practical responses are suggested in the areas of consumer education, medical education, and interaction with commercial companies.

  13. Issues of a Computer-Aided Design of Hydraulic Jacks

    NASA Astrophysics Data System (ADS)

    Averchenkov, V. I.; Averchenkov, A. V.; Kolyakinand, V. V.; Orekhov, O. D.

    2016-04-01

    The article deals with the issues of a computer-aided design of hydraulic equipment, namely hydraulic jacks. Design principles of the hydraulic jack CAD system are described. In addition, the possibilities for the system improvement and expansion are considered.

  14. Key Issues in Building Design: How to Get Started in Planning a Project. Library Buildings and Equipment Section

    ERIC Educational Resources Information Center

    Dahlgren, Anders C.; Eigenbrodt, Olaf; Latimer, Karen; Romero, Santi

    2009-01-01

    Based on the IFLA (International Federation of Library Associations and Institutions) Library Buildings and Equipment Section's Library Building Guidelines published in 2007, this short publication summarises the key points to take into consideration when designing a new or refurbished library building. The aim of the brochure is not to replace…

  15. Medicare program; competitive acquisition for certain durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS) and other issues. Final rule.

    PubMed

    2007-04-10

    This final rule establishes competitive bidding programs for certain Medicare Part B covered items of durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS) throughout the United States in accordance with sections 1847(a) and (b) of the Social Security Act. These competitive bidding programs, which will be phased in over several years, utilize bids submitted by DMEPOS suppliers to establish applicable payment amounts under Medicare Part B.

  16. Pharmacogenomics: Principles & Issues

    ERIC Educational Resources Information Center

    Hoh, Yin Kiong; Boo, Hong Kwen

    2007-01-01

    Human beings vary in their responses to the drugs prescribed to them. These variations can be due to differences in their age, gender, weight, health status, diet, concurrent therapy and genetic make-up. Recently, it has been estimated that 85% of a patient's response to drugs is due to the genetic make-up of the individual (Snedden, 1999).…

  17. Pharmacogenomics: Principles & Issues

    ERIC Educational Resources Information Center

    Hoh, Yin Kiong; Boo, Hong Kwen

    2007-01-01

    Human beings vary in their responses to the drugs prescribed to them. These variations can be due to differences in their age, gender, weight, health status, diet, concurrent therapy and genetic make-up. Recently, it has been estimated that 85% of a patient's response to drugs is due to the genetic make-up of the individual (Snedden, 1999).…

  18. Twenty-third water reactor safety information meeting. Volume 3, structural and seismic engineering, primary systems integrity, equipment operability and aging, ECCS strainer blockage research and regulatory issues

    SciTech Connect

    Monteleone, S.

    1996-03-01

    This three-volume report contains papers presented at the Twenty- Third Water Reactor Safety Information Meeting held at the Bethesda Marriott Hotel, Bethesda, Maryland, October 23-25, 1995. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Italy, Japan, Norway, Russia, Sweden, and Switzerland. This document, Volume 3, presents topics in Structural & Seismic Engineering, Primary Systems Integrity, Equipment Operability and Aging, and ECCS Strainer Blockage Research & Regulatory Issues. Individual papers have been cataloged separately.

  19. Culturally Equipped for Socio-Scientific Issues? A comparative study on how teachers and students in mono- and multiethnic schools handle work with complex issues

    NASA Astrophysics Data System (ADS)

    Ideland, Malin; Malmberg, Claes; Winberg, Mikael

    2011-09-01

    Socio-scientific issues (SSI) are not only said to increase students' interest in science, but they also strengthen the generic skills of teamwork, problem-solving, and media literacy. At the same time, these skills are prerequisites for successful work with SSI. The aim of the study is to analyze what happens when SSI are implemented in science classrooms with various degrees of ethnic diversity and socio-cultural status. We are also interested in knowing how teachers structure the SSI work from discourses on what suits different students. Quantitative and qualitative methods are combined, for example, questionnaires and ethnographic fieldwork, presented through partial least squares analysis and thick descriptions. We can notice discursive differences between 'Us' and 'The Other' and between mono- and multiethnic schools. In an earlier research, images of differences between the different student groups emerged, and we can find these in the results from the questionnaires. In an observation study, another pattern appeared that indicated similarities rather than differences between mono- and multiethnic classrooms. The students are first of all inside the discourse of 'the successful student.' Noteworthy is that the teachers' roles correspond better with the discourse than with how students actually act. The study also shows that SSI articulate a collision between different discourses on education: a discourse on differences between students in multi- and monoethnic classrooms; a discourse on how to become a successful student; and a discourse on the school's mission to educate participating citizens. It is suggested that schools should relate to, expose, and articulate discursive clashes that emerge when introducing new work forms.

  20. Design Principles for Equity and Excellence at Hispanic-Serving Institutions. PERSPECTIVAS: Issues in Higher Education Policy and Practice. Issue No. 4, Spring 2015

    ERIC Educational Resources Information Center

    Malcom-Piqueux, Lindsey E.; Bensimon, Estela Mara

    2015-01-01

    Hispanic-Serving Institutions (HSIs) shoulder unique responsibilities, including the education of post-traditional student populations, while facing distinct resource-related challenges. Any efforts to assess the performance of HSIs must be done with these facts in mind. This brief offers design principles for equity and excellence at HSIs that…

  1. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

  2. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

  3. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

  4. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental... regulations, the Office of Economics, Environmental Analysis, and Administration shall issue an Accounting... ASC. The ASC issued by the Office of Economics, Environmental Analysis, and Administration will remain...

  5. Shipboard Electronic Equipments.

    ERIC Educational Resources Information Center

    Naval Personnel Program Support Activity, Washington, DC.

    Fundamentals of major electronic equipments on board ships are presented in this text prepared for naval officers in general. Basic radio principles are discussed in connection with various types of transmitters, receivers, antennas, couplers, transfer panels, remote-control units, frequency standard equipments, teletypewriters, and facsimile…

  6. Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.

    ERIC Educational Resources Information Center

    Hilley, Robert

    This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…

  7. Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.

    ERIC Educational Resources Information Center

    Hilley, Robert

    This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…

  8. Development of a new testing equipment that combines the working principles of both the split Hopkinson bar and the drop weight testers.

    PubMed

    Adas, Rateb; Haiba, Majed

    2016-01-01

    In the current work, a new high strain rate tensile testing equipment is proposed. The equipment uses a pendulum device to generate an impact load and a three-bar mechanism to bring that load to act upon a specially designed specimen. As the standard impact testing apparatus uses pendulum device and the well-known SHB high strain rate tester adopts the above-mentioned mechanism, the introduced equipment can be dealt with as an impact apparatus in which the base that supports the V-shape specimen is replaced with the three-bar configuration that the traditional SHB uses. In order to demonstrate the applicability of the new tester, virtual design tools were used to determine the most appropriate configuration for it. Then, a detailed design was created, and a full-scale prototype was produced, calibrated, instrumented and tested. The obtained results demonstrate that the new tester is capable of axially straining steel specimens up to failure at a maximum rate of about 250 s(-1), which is reasonable when compared with a more established high strain rate testers.

  9. The use of the principle of superposition in measuring and predicting the thermal characteristics of an electronic equipment operated in a space environment

    NASA Technical Reports Server (NTRS)

    Gale, E. H.

    1980-01-01

    The advantages and possible pitfalls of using a generalized method of measuring and, based on these measurements, predicting the transient or steady-state thermal response characteristics of an electronic equipment designed to operate in a space environment are reviewed. The method requires generation of a set of thermal influence coefficients by test measurement in vacuo. A implified thermal mockup isused in this test. Once this data set is measured, temperatures resulting from arbitrary steady-state or time varying power profiles can be economically calculated with the aid of a digital computer.

  10. Accidents associated with equipment.

    PubMed

    Heath, M L

    1984-01-01

    Serious accidents in which the possibility of equipment-related hazards are raised have been reported to the Scientific and Technical Branch of the Department of Health and Social Security. The author has examined anonymous summaries of 23 such reports of events which occurred over a 5-year period. The principle cause of catastrophe in seventeen of the incidents was user error involving disconnexion or misconnexion. Faulty systems of equipment management combined in some cases with inadequate pre-anaesthetic checking of apparatus were responsible for the other instances. Appropriate systems of equipment management and checking together with meticulous basic clinical monitoring are recommended as the best safeguards in anaesthetic practice.

  11. (18)F-FDG PET/CT quantification in head and neck squamous cell cancer: principles, technical issues and clinical applications.

    PubMed

    Manca, Gianpiero; Vanzi, Eleonora; Rubello, Domenico; Giammarile, Francesco; Grassetto, Gaia; Wong, Ka Kit; Perkins, Alan C; Colletti, Patrick M; Volterrani, Duccio

    2016-07-01

    (18)F-FDG PET/CT plays a crucial role in the diagnosis and management of patients with head and neck squamous cell cancer (HNSCC). The major clinical applications of this method include diagnosing an unknown primary tumour, identifying regional lymph node involvement and distant metastases, and providing prognostic information. (18)F-FDG PET/CT is also used for precise delineation of the tumour volume for radiation therapy planning and dose painting, and for treatment response monitoring, by detecting residual or recurrent disease. Most of these applications would benefit from a quantitative approach to the disease, but the quantitative capability of (18)F-FDG PET/CT is still underused in HNSCC. Innovations in PET/CT technology promise to overcome the issues that until now have hindered the employment of dynamic procedures in clinical practice and have limited "quantification" to the evaluation of standardized uptake values (SUV), de facto a semiquantitative parameter, the limits of which are well known to the nuclear medicine community. In this paper the principles of quantitative imaging and the related technical issues are reviewed so that professionals involved in HNSCC management can reflect on the advantages of "true" quantification. A discussion is then presented on how semiquantitative information is currently used in clinical (18)F-FDG PET/CT applications in HNSCC, by discussing the improvements that could be obtained with more advanced and "personalized" quantification techniques.

  12. Electrosurgery: principles and safety issues.

    PubMed

    Odell, R C

    1995-09-01

    The use of monopolar electrosurgical energy has been the "gold standard" for the past 50 years. It has diverse capabilities, such as fulguration, precise vaporization, and coaptation of large vessels. Technologic advances in performance and safety have positioned this device as a useful tool in a surgeon's armamentarium. The adaptation of active electrode monitoring for stray energy as a result of insulation failure or capacitive coupling and the use of completely metal trocar cannulas will increase the confidence of the surgeon and the safety of his/ her patient. It is the author's opinion that its use will prove itself in laparoscopy. As with any surgical tool or energy source, education and skill are required. This introduction on the principal of the biophysics of electrical energy on tissue and the safety consideration is a start to further one's understanding of this surgical tool.

  13. Teaching Ethical Reflexivity in Information Systems: How to Equip Students to Deal with Moral and Ethical Issues of Emerging Information and Communication Technologies

    ERIC Educational Resources Information Center

    Stahl, Bernd Carsten

    2011-01-01

    Teaching ethics to students of information systems (IS) raises a number of conceptual and content-related issues. The present paper starts out by developing a conceptual framework of moral and ethical issues that distinguishes between moral intuition, explicit morality, ethical theory and meta-ethical reflection. This conceptual framework…

  14. Ethics of the electrified mind: Defining issues and perspectives on the principled use of brain stimulation in medical research and clinical care

    PubMed Central

    Cabrera, Laura Y.; Evans, Emily L.; Hamilton, Roy H.

    2013-01-01

    In recent years, non-pharmacologic approaches to modifying human neural activity have gained increasing attention. One of these approaches is brain stimulation, which involves either the direct application of electrical current to structures in the nervous system or the indirect application of current by means of electromagnetic induction. Interventions that manipulate the brain have generally been regarded as having both the potential to alleviate devastating brain-related conditions and the capacity to create unforeseen and unwanted consequences. Hence, although brain stimulation techniques offer considerable benefits to society, they also raise a number of ethical concerns. In this paper we will address various dilemmas related to brain stimulation in the context of clinical practice and biomedical research. We will survey current work involving deep brain stimulation (DBS), transcranial magnetic stimulation (TMS) and transcranial direct current stimulation (tDCS). We will reflect upon relevant similarities and differences between them, and consider some potentially problematic issues that may arise within the framework of established principles of medical ethics: nonmaleficence and beneficence, autonomy, and justice. PMID:23733209

  15. Equipment Management Manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Equipment Management Manual (NHB 4200.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958, as amended (42 USC 2473), and sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This revision is effective upon receipt. This is a controlled manual, issued in loose-leaf form, and revised through page changes. Additional copies for internal use may be obtained through normal distribution.

  16. Proceedings of the sixteenth international symposium on mine planning and equipment selection (MPES 2007) and the tenth international symposium on environmental issues and waste management in energy and mineral production (SWEMP 2007)

    SciTech Connect

    Singhal, R.K.; Fytas, K.; Jongsiri, S.; Ge, Hao

    2007-07-01

    Papers presented at MPES 2007 covered: coal mining and clean coal processing technologies; control, design and planning of surface and underground mines; drilling, blasting and excavation engineering; mining equipment selection; automation and information technology; maintenance and production management for mines and mining systems; health, safety and environment; cost effective methods of mine reclamation; mine closure and waste disposal; and rock mechanics and geotechnical issues. Papers from SWEMP 2007 discussed methods and technologies for assessing, minimizing and preventing environmental problems associated with mineral and energy production. Topics included environmental impacts of coal-fired power projects; emission control in thermal power plants; greenhouse gas abatement technologies; remediation of contaminated soil and groundwater; environmental issues in surface and underground mining of coal, minerals and ores; managing mine waste and mine water; and control of effluents from mineral processing, metallurgical and chemical plants.

  17. Intuitions, principles and consequences

    PubMed Central

    Shaw, A

    2001-01-01

    Some approaches to the assessment of moral intuitions are discussed. The controlled ethical trial isolates a moral issue from confounding factors and thereby clarifies what a person's intuition actually is. Casuistic reasoning from situations, where intuitions are clear, suggests or modifies principles, which can then help to make decisions in situations where intuitions are unclear. When intuitions are defended by a supporting principle, that principle can be tested by finding extreme cases, in which it is counterintuitive to follow the principle. An approach to the resolution of conflict between valid moral principles, specifically the utilitarian and justice principles, is considered. It is argued that even those who justify intuitions by a priori principles are often obliged to modify or support their principles by resort to the consideration of consequences. Key Words: Intuitions • principles • consequences • utilitarianism PMID:11233371

  18. Audiovisual Equipment Self Instruction Manual. Third Edition.

    ERIC Educational Resources Information Center

    Oates, Stanton C.

    An audiovisual equipment manual provides both the means of learning how to operate equipment and information needed to adjust equipment that is not performing properly. The manual covers the basic principles of operation for filmstrip-slide projectors, motion picture projectors, opaque projectors, overhead projectors, portable screens, record…

  19. Optical Issues in Measuring Strabismus

    PubMed Central

    Irsch, Kristina

    2015-01-01

    Potential errors and complications during examination and treatment of strabismic patients can be reduced by recognition of certain optical issues. This articles reviews basic as well as guiding principles of prism optics and optics of the eye to equip the reader with the necessary know-how to avoid pitfalls that are commonly encountered when using prisms to measure ocular deviations (e.g., during cover testing), and when observing the corneal light reflex to estimate ocular deviations (e.g., during Hirschberg or Krimsky testing in patients who do not allow for cover testing using prisms). PMID:26180462

  20. Issue Concerning EPA's Position on what Fuel Combustion Equipment should be Counted Toward the 250 Million BTU/hr under PSD Requirements

    EPA Pesticide Factsheets

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  1. Pesticide Registration: Clarification for Ion Generating Equipment

    EPA Pesticide Factsheets

    EPA issued a Federal Register Notice that clarifies the Agency's position on the distinction between devices and pesticides with regard to ion-generating equipment and explains why such equipment will now be regulated as a pesticide.

  2. Highly Sensitive and Selective Uranium Detection in Natural Water Systems Using a Luminescent Mesoporous Metal-Organic Framework Equipped with Abundant Lewis Basic Sites: A Combined Batch, X-ray Absorption Spectroscopy, and First Principles Simulation Investigation.

    PubMed

    Liu, Wei; Dai, Xing; Bai, Zhuanling; Wang, Yanlong; Yang, Zaixing; Zhang, Linjuan; Xu, Lin; Chen, Lanhua; Li, Yuxiang; Gui, Daxiang; Diwu, Juan; Wang, Jianqiang; Zhou, Ruhong; Chai, Zhifang; Wang, Shuao

    2017-04-04

    Uranium is not only a strategic resource for the nuclear industry but also a global contaminant with high toxicity. Although several strategies have been established for detecting uranyl ions in water, searching for new uranium sensor material with great sensitivity, selectivity, and stability remains a challenge. We introduce here a hydrolytically stable mesoporous terbium(III)-based MOF material compound 1, whose channels are as large as 27 Å × 23 Å and are equipped with abundant exposed Lewis basic sites, the luminescence intensity of which can be efficiently and selectively quenched by uranyl ions. The detection limit in deionized water reaches 0.9 μg/L, far below the maximum contamination standard of 30 μg/L in drinking water defined by the United States Environmental Protection Agency, making compound 1 currently the only MOF material that can achieve this goal. More importantly, this material exhibits great capability in detecting uranyl ions in natural water systems such as lake water and seawater with pH being adjusted to 4, where huge excesses of competing ions are present. The uranyl detection limits in Dushu Lake water and in seawater were calculated to be 14.0 and 3.5 μg/L, respectively. This great detection capability originates from the selective binding of uranyl ions onto the Lewis basic sites of the MOF material, as demonstrated by synchrotron radiation extended X-ray adsorption fine structure, X-ray adsorption near edge structure, and first principles calculations, further leading to an effective energy transfer between the uranyl ions and the MOF skeleton.

  3. Solar Equipment

    NASA Astrophysics Data System (ADS)

    1983-01-01

    A medical refrigeration and a water pump both powered by solar cells that convert sunlight directly into electricity are among the line of solar powered equipment manufactured by IUS (Independent Utility Systems) for use in areas where conventional power is not available. IUS benefited from NASA technology incorporated in the solar panel design and from assistance provided by Kerr Industrial Applications Center.

  4. Solar Equipment

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A medical refrigeration and a water pump both powered by solar cells that convert sunlight directly into electricity are among the line of solar powered equipment manufactured by IUS (Independent Utility Systems) for use in areas where conventional power is not available. IUS benefited from NASA technology incorporated in the solar panel design and from assistance provided by Kerr Industrial Applications Center.

  5. Telescope Equipment

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Renaissance Telescope for high resolution and visual astronomy has five 82-degree Field Tele-Vue Nagler Eyepieces, some of the accessories that contribute to high image quality. Telescopes and eyepieces are representative of a family of optical equipment manufactured by Tele-Vue Optics, Inc.

  6. Lunar surface mining equipment study

    NASA Astrophysics Data System (ADS)

    Podnieks, Egons R.; Siekmeier, John A.

    Results of a NASA-sponsored assessment of the various proposed lunar surface mining equipment concepts submitted to NASA are presented. The proposed equipment was reviewed and evaluated with due consideration of equipment design criteria, basic mining principles, and the lunar environment. On the basis of this assessment, two pieces of mining equipment were conceptualized for surface mining operations: the ripper-excavator-loader, also capable of operating as a load-haul-dump vehicle, and the haulage vehicle, capable of transporting feedstock from the pit, liquid oxygen containers from the processing plant, and materials during construction. Reliable and durable lunar mining equipment is found to be best developed by the evolution of proven terrestrial technology adapted to the lunar environment.

  7. New Trends in School Science Equipment.

    ERIC Educational Resources Information Center

    Lowe, Norman K., Ed.

    This four-part volume examines trends, problems, and issues related to school science equipment. Part 1 focuses on laboratory work and practical activities in science and technology education, considering equipment and curriculum development, equipment development related to curricula in Brazil, uses of local resources for practical work,…

  8. Rescue Equipment

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The Lifeshear cutter, a rescue tool for freeing accident victims from wreckage, was developed under the Clinton Administration's Technology Reinvestment Program. Prior cutting equipment was cumbersome and expensive; the new cutter is 50 percent lighter and 70 percent cheaper. The cutter is pyrotechnically-actuated, using a miniature version of the power cartridges used for separation devices on the Space Shuttle and other NASA spacecraft. Hi-Shear Technology Corporation developed the cutter with the Jet Propulsion Laboratory and input from the City of Torrance (California) Fire Department.

  9. Principles of pain control in palliative care for adults. Guidance prepared by a Working Group of the Ethical Issues in Medicine Committee of the Royal College of Physicians.

    PubMed

    2000-01-01

    Specialist palliative care is now widely available and there are many good textbooks of palliative medicine. But some patients still suffer pain needlessly. Clinicians may not know how to use analgesia appropriately or may be anxious about giving an adequate dose of strong opioids such as morphine. This brief outline is intended to make the principles of pain control readily available to all clinicians who look after terminally ill patients. It applies to patients with non-malignant disease as well as to those with advanced cancer.

  10. Bernoulli's Principle

    ERIC Educational Resources Information Center

    Hewitt, Paul G.

    2004-01-01

    Some teachers have difficulty understanding Bernoulli's principle particularly when the principle is applied to the aerodynamic lift. Some teachers favor using Newton's laws instead of Bernoulli's principle to explain the physics behind lift. Some also consider Bernoulli's principle too difficult to explain to students and avoid teaching it…

  11. Bernoulli's Principle

    ERIC Educational Resources Information Center

    Hewitt, Paul G.

    2004-01-01

    Some teachers have difficulty understanding Bernoulli's principle particularly when the principle is applied to the aerodynamic lift. Some teachers favor using Newton's laws instead of Bernoulli's principle to explain the physics behind lift. Some also consider Bernoulli's principle too difficult to explain to students and avoid teaching it…

  12. Medical Issues: Breathing

    MedlinePlus

    ... About Us News Facebook Twitter YouTube Learn About SMA About SMA Types of SMA Causes & Diagnosis Genetics Testing Carriers What Diagnosis Means ... Care Packages Information Packets Equipment Pool Living With SMA Medical Issues Palliative Breathing Orthopedics Nutrition Equipment Daily ...

  13. Medical Issues: Orthopedics

    MedlinePlus

    ... About Us News Facebook Twitter YouTube Learn About SMA About SMA Types of SMA Causes & Diagnosis Genetics Testing Carriers What Diagnosis Means ... Care Packages Information Packets Equipment Pool Living With SMA Medical Issues Palliative Breathing Orthopedics Nutrition Equipment Daily ...

  14. 7 CFR 800.158 - Equipment testing work records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... equipment testing service or activity consists of an official equipment testing report as prescribed in the... report may, upon request, be issued to the owner or operator of the equipment. The testing report shall... test results, (g) number or other identification of the approval tag or label affixed to the equipment...

  15. 7 CFR 800.158 - Equipment testing work records.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... equipment testing service or activity consists of an official equipment testing report as prescribed in the... report may, upon request, be issued to the owner or operator of the equipment. The testing report shall... test results, (g) number or other identification of the approval tag or label affixed to the equipment...

  16. Basic Principles of Chromatography

    NASA Astrophysics Data System (ADS)

    Ismail, Baraem; Nielsen, S. Suzanne

    Chromatography has a great impact on all areas of analysis and, therefore, on the progress of science in general. Chromatography differs from other methods of separation in that a wide variety of materials, equipment, and techniques can be used. [Readers are referred to references (1-19) for general and specific information on chromatography.]. This chapter will focus on the principles of chromatography, mainly liquid chromatography (LC). Detailed principles and applications of gas chromatography (GC) will be discussed in Chap. 29. In view of its widespread use and applications, high-performance liquid chromatography (HPLC) will be discussed in a separate chapter (Chap. 28). The general principles of extraction are first described as a basis for understanding chromatography.

  17. Matters of Principle.

    ERIC Educational Resources Information Center

    Martz, Carlton

    1999-01-01

    This issue of "Bill of Rights in Action" looks at individuals who have stood on principle against authority or popular opinion. The first article investigates John Adams and his defense of British soldiers at the Boston Massacre trials. The second article explores Archbishop Thomas Becket's fatal conflict with England's King Henry II.…

  18. Principles of Biomedical Ethics

    PubMed Central

    Athar, Shahid

    2012-01-01

    In this presentation, I will discuss the principles of biomedical and Islamic medical ethics and an interfaith perspective on end-of-life issues. I will also discuss three cases to exemplify some of the conflicts in ethical decision-making. PMID:23610498

  19. Equipment management user's handbook for property custodians

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The NASA Equipment Management User's Handbook for Property Custodians is issued as an instructional guide for personnel designated as property custodians and technical personnel involved in the acquisition, management, and use of NASA-owned equipment. This handbook provides general information and basic operational procedures for processing equipment transactions through the agency-wide NASA Equipment Management System (NEMS). Each NASA installation must prepare supplementary instructions for local requirements beyond the scope of NASA-wide policies and procedures contained herein, or as specified for local implementation in NHB 4200.1, 'NASA Equipment Management Manual.' NHB 4200.1 sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This handbook is a controlled document, issued in loose-leaf form and revised by page changes. Additional copies for internal use may be obtained through normal distribution.

  20. Personal protective equipment

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000447.htm Personal protective equipment To use the sharing features on this page, please enable JavaScript. Personal protective equipment is special equipment you wear to create a ...

  1. Study Of Robotic Replacement Of Equipment Modules

    NASA Technical Reports Server (NTRS)

    Backes, Paul G.; Tso, Kam S.

    1992-01-01

    Report discusses issues pertaining to control of single-arm robotic manipulator to remove and install interchangeable equipment modules. Presents preliminary control strategy intended to guide development of control algorithms, along with analyses of problems arising in implementing strategy.

  2. Buridan's Principle

    NASA Astrophysics Data System (ADS)

    Lamport, Leslie

    2012-08-01

    Buridan's principle asserts that a discrete decision based upon input having a continuous range of values cannot be made within a bounded length of time. It appears to be a fundamental law of nature. Engineers aware of it can design devices so they have an infinitessimal probability of not making a decision quickly enough. Ignorance of the principle could have serious consequences.

  3. Principled Narrative

    ERIC Educational Resources Information Center

    MacBeath, John; Swaffield, Sue; Frost, David

    2009-01-01

    This article provides an overview of the "Carpe Vitam: Leadership for Learning" project, accounting for its provenance and purposes, before focusing on the principles for practice that constitute an important part of the project's legacy. These principles framed the dialogic process that was a dominant feature of the project and are presented,…

  4. Functioning condition monitoring of industrial equipment

    NASA Astrophysics Data System (ADS)

    Ungureanu, N. S.; Petrovan, A.; Ungureanu, M.; Alexandrescu, M.

    2017-02-01

    The paper analyses the theoretical aspects related to monitoring industrial equipment. Are treated issues that concern the choosing of industrial equipment to be monitored, the parameters to be monitored, monitoring mode (local or remote) and the mode of collection and transmission of data.

  5. Equipment qualification (EQ): Risk scoping study

    SciTech Connect

    Bustard, L.D.; Clark, J.; Medford, G.T.; Kolaczkowski, A.M.

    1989-01-01

    The objective of the EQ--Risk Scoping Study was to use probabilistic risk assessment (PRA) techniques (1) to assess the impact of electrical equipment environmental qualification or lack thereof on reactor risk and its uncertainties, and (2) to identify any analyses or testing that may be necessary to reduce the risk or its uncertainties stemming from lack of qualification of equipment important to safety. To achieve these objectives, PRA techniques and insights were employed to identify equipment that must function in accident-induced harsh environments and whose failure would be risk significant. Several components from the resultant list were then selected for more detailed analyses. Accident scenarios and environments, which PRAs suggest are risk significant, were determined for each selected equipment operation. For these accident conditions, both equipment qualification research and test experiences were examined to determine whether equipment accident reliability might differ substantially from the reliability values based on normal operation conditions employed in past PRA analyses. Note, accident reliability information is generally unavailable. Where significant differences were considered probable, parametric risk achievement analyses were used to assess the potential risk impact of the equipment failures. In addition, those equipment qualification practices and outstanding research issues that potentially could impact the accident equipment reliability were noted. This information, when combined with perspectives regarding potential equipment risk impact, provided a basis for assessing the potential risk importance of various EQ practices and issues. Additional discussion regarding the study's approach, conclusions, and recommendations is provided. 54 refs., 9 figs., 33 tabs.

  6. Principles of Instructed Language Learning

    ERIC Educational Resources Information Center

    Ellis, Rod

    2005-01-01

    This article represents an attempt to draw together findings from a range of second language acquisition studies in order to formulate a set of general principles for language pedagogy. These principles address such issues as the nature of second language (L2) competence (as formulaic and rule-based knowledge), the contributions of both focus on…

  7. Photovoltaics: Basic Design Principles and Components

    SciTech Connect

    1997-03-01

    This publication will introduce you to the basic design principles and components of PV systems. It will also help you discuss these systems knowledgeably with an equipment supplier or system installer.

  8. Global Issues and the Precautionary Principle

    ERIC Educational Resources Information Center

    Brody, Charlotte

    2005-01-01

    The author observes that environmental science is finding that industrial chemicals act like pharmaceuticals: a dose that won't hurt an adult can harm a fetus or a child; an amount that won't harm the mother can hurt her child in utero; some people are more sensitive than others to the effect; and one substance can interact with others and cause a…

  9. Global Issues and the Precautionary Principle

    ERIC Educational Resources Information Center

    Brody, Charlotte

    2005-01-01

    The author observes that environmental science is finding that industrial chemicals act like pharmaceuticals: a dose that won't hurt an adult can harm a fetus or a child; an amount that won't harm the mother can hurt her child in utero; some people are more sensitive than others to the effect; and one substance can interact with others and cause a…

  10. Space processing applications payload equipment study. Volume 2E: Commercial equipment utility

    NASA Technical Reports Server (NTRS)

    Smith, A. G. (Editor)

    1974-01-01

    Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.

  11. Equipment. Out of order.

    PubMed

    Connolly, C

    2000-08-17

    The NHS has underinvested in equipment for more than 20 years. Most hospitals have inadequate equipment inventories. More than half the anaesthetic machines in use are more than five years old and should be replaced. Almost a fifth of the equipment used in cancer treatment is obsolete. Current accounting systems act as a disincentive to replacing old equipment.

  12. Implementing the precautionary principle.

    PubMed

    deFur, Peter L; Kaszuba, Michelle

    2002-04-08

    The precautionary principle can be found in international treaties that protect human health and the environment from a variety of pollutants and perturbations. One of the earliest forms of the precautionary principle was used in the 1980s in Europe to protect the North Sea. In 1992, the Rio Declaration specifically included the precautionary principle in calling on nations to protect the environment. The US articulation that best embodies this approach to environment and human health protection is the Wingspread statement: 'When an activity raises threats of harm to human health or the environment, precautionary measures should be taken, even if some cause and effect relationships are not fully established scientifically.' The key element is the matter of acting in the face of uncertainty. Applications of the precautionary principle are not, however, new to US environmental policy and management. The present paper uses case studies to examine the application of the precautionary principle to environmental decisions. These cases range from ecosystem protection on the Charles River, Massachusetts, to the effort to prevent computer crashes at the end of the year 2000. These cases deal with the problem of uncertainty, whether concerning the cause, effect, systemic condition or multiple factors. Uncertainty represents one of the features that provoke controversy over these issues and the precautionary principle.

  13. Perspectives of patients with disabilities on the accessibility of medical equipment: examination tables, imaging equipment, medical chairs, and weight scales.

    PubMed

    Story, Molly Follette; Schwier, Erin; Kailes, June Isaacson

    2009-10-01

    In a prior survey, patients with disabilities reported difficulty using many common types of medical equipment. The purpose of this study was to conduct focus groups to explore in greater detail the most common difficulties mentioned by survey participants in order to identify critical issues related to accessibility and usability and to inform subsequent research. Participants of eight focus groups discussed medical equipment accessibility and safety issues experienced when using or attempting to access four specific categories of medical devices: examination tables, imaging equipment, medical chairs, and weight scales. Content of the transcript of each focus group was categorized according to five major themes: safety issues, equipment issues, health care provider issues, patient issues, and environmental issues. The results were then aggregated. The focus group participants reported that characteristics of the equipment's contact surfaces could cause difficulty and discomfort. Participants commented on lack of physical support for patients with disabilities to transfer their bodies onto and off the equipment and lack of support to achieve and maintain body positions while on the equipment. Wheelchair scales were reported as rarely available, and scales without voice output were inaccessible to blind individuals. Health care provider issues and patient issues are discussed in relation to the accessibility and safety of the equipment. Some types of medical devices and technologies present substantial barriers for some medical patients with disabilities, which may negatively affect their access to health care. Recommendations for improved designs are provided to enhance medical equipment accessibility and safety.

  14. Primer for selecting lab equipment.

    PubMed

    Myers, Joe

    2007-01-01

    The preceding review provides a simplified presentation of many of the processes involved in selecting laboratory equipment--from a discussion of the most common phases of the selection process to a more comprehensive listing of the most common primary considerations and other, less-tangible issues. It was designed to provide laboratorians seeking to acquire new instruments with a framework for the collection of objective information and the evaluation of technical capabilities and acquisition options.

  15. Medicare and durable medical equipment.

    PubMed

    Coviello, Amy

    2002-01-01

    Medicare coverage of wheelchairs, hospital beds and other durable medical equipment (DME) is a major source of confusion for people with Medicare, their families and the professionals who work with them. Yet, consumer publications rarely touch on it. In this brief we offer an overview of DME coverage issues and payment policies, including potential costs for consumers and their rights to appeal denials of payment.

  16. Common Principles and Multiculturalism

    PubMed Central

    Zahedi, Farzaneh; Larijani, Bagher

    2009-01-01

    Judgment on rightness and wrongness of beliefs and behaviors is a main issue in bioethics. Over centuries, big philosophers and ethicists have been discussing the suitable tools to determine which act is morally sound and which one is not. Emerging the contemporary bioethics in the West has resulted in a misconception that absolute westernized principles would be appropriate tools for ethical decision making in different cultures. We will discuss this issue by introducing a clinical case. Considering various cultural beliefs around the world, though it is not logical to consider all of them ethically acceptable, we can gather on some general fundamental principles instead of going to the extremes of relativism and absolutism. Islamic teachings, according to the presented evidence in this paper, fall in with this idea. PMID:23908720

  17. Laser principles.

    PubMed

    Bogdan Allemann, Inja; Kaufman, Joely

    2011-01-01

    Since the construction of the first laser in the 1960s, the role that lasers play in various medical specialities, including dermatology, has steadily increased. However, within the last 2 decades, the technological advances and the use of lasers in the field of dermatology have virtually exploded. Many treatments have only become possible with the use of lasers. Especially in aesthetic medicine, lasers are an essential tool in the treatment armamentarium. Due to better research and understanding of the physics of light and skin, there is now a wide and increasing array of different lasers and devices to choose from. The proper laser selection for each indication and treatment requires a profound understanding of laser physics and the basic laser principles. Understanding these principles will allow the laser operator to obtain better results and help avoid complications. This chapter will give an in-depth overview of the physical principles relevant in cutaneous laser surgery. Copyright © 2011 S. Karger AG, Basel.

  18. Personal protective equipment provision in prehospital care: a national survey.

    PubMed

    Krzanicki, D A; Porter, K M

    2009-12-01

    Safety in prehospital practice is a paramount principle. Personal protective equipment (PPE) use is intrinsic to safe practice. There is varied guidance as to what constitutes effective PPE. No evidence is available of what current provision encompasses. A questionnaire-based study directed to all ambulance trusts, British Association for Immediate Care (BASICS) schemes and air ambulance operations in England, Scotland and Wales. Total response rate was in excess of 66%. A specific protocol for PPE use was issued by 81%, 89% and 38% of ambulance trusts, air ambulance and BASICS schemes, respectively. There was a wide variation in provision of PPE both within and between different groups of providers. Fewer than 55% of providers had an evaluation system in place for reviewing PPE use. Many reasons account for the differences in provision. There is a clear need for a standard to be set nationally in conjunction with locally implemented evaluation and re-accreditation processes.

  19. Auto Mechanics. Heavy Equipment. Small Engines.

    ERIC Educational Resources Information Center

    Finnerty, Kathy

    Developed for use in auto mechanics, Heavy Equipment Repair and Operation (HERO), and small engines programs, these study guides and supplemental worksheets cover operating principles, lubrication, cooling system, ignition circuit and electrical system, and fuel system. The worksheets and guide questions are phrased to emphasize key points…

  20. Auto Mechanics. Heavy Equipment. Small Engines.

    ERIC Educational Resources Information Center

    Finnerty, Kathy

    Developed for use in auto mechanics, Heavy Equipment Repair and Operation (HERO), and small engines programs, these study guides and supplemental worksheets cover operating principles, lubrication, cooling system, ignition circuit and electrical system, and fuel system. The worksheets and guide questions are phrased to emphasize key points…

  1. Exercise Equipment: Neutral Buoyancy

    NASA Technical Reports Server (NTRS)

    Shackelford, Linda; Valle, Paul

    2016-01-01

    Load Bearing Equipment for Neutral Buoyancy (LBE-NB) is an exercise frame that holds two exercising subjects in position as they apply counter forces to each other for lower extremity and spine loading resistance exercises. Resistance exercise prevents bone loss on ISS, but the ISS equipment is too massive for use in exploration craft. Integrating the human into the load directing, load generating, and motion control functions of the exercise equipment generates safe exercise loads with less equipment mass and volume.

  2. Mobile Equipment Expands Inventory.

    ERIC Educational Resources Information Center

    McGough, Robert L.; And Others

    1978-01-01

    Describes the Mobile Equipment Modules (MEM) system in Duluth, Minnesota. MEM is a way to hold down costs and increase learning opportunities by consolidating purchases of expensive shop equipment within the school district, grouping the equipment in modules, and scheduling and moving it from school to school as needed. (MF)

  3. Streamline Your Equipment Distribution

    ERIC Educational Resources Information Center

    McMeen, George R.

    1976-01-01

    To facilitate the distribution of audiovisual equipment Moorhead State University in Moorhead, Minnesota, has established audiovisual equipment control centers in various departments throughout the university. The audiovisual center then relays information among faculty concerning the location and condition of equipment. (JY)

  4. Mobile Equipment Expands Inventory.

    ERIC Educational Resources Information Center

    McGough, Robert L.; And Others

    1978-01-01

    Describes the Mobile Equipment Modules (MEM) system in Duluth, Minnesota. MEM is a way to hold down costs and increase learning opportunities by consolidating purchases of expensive shop equipment within the school district, grouping the equipment in modules, and scheduling and moving it from school to school as needed. (MF)

  5. Equipment costs rise moderately

    SciTech Connect

    Farrar, G.

    1996-10-07

    The paper presents data on costs for the five equipment items which make up the Nelson-Farrar cost index. Equipment includes pumps and compressors, electrical machinery, engines, instruments, and heat exchangers. Data are also presented on refining costs, broken down into the following categories: operating costs, operating labor cost, construction labor cost, and equipment and materials.

  6. Trends in medical equipment service.

    PubMed

    1997-06-01

    Driven by the recent emphasis on cost containment in the healthcare industry as a whole, hospitals, manufacturers, and service providers have been spurred to try to find ways to reduce their costs and increase their revenues. As a result of the measures taken to achieve these goals, the medical equipment service industry has been experiencing a period of rapid change. In this environment, traditional alternatives for servicing medical equipment are being challenged, and new alternatives are being developed. The changes occurring in this industry are of vital interest to clinical engineers and technicians because it is those changes that will determine the future role of these professionals in the hospital. While such technology experts will not become obsolete-the reliance on medical technology to provide optimal healthcare will certainly continue in the United States and throughout the rest of the developed world-the roles of these experts could very likely change. As hospitals focus more narrowly on their core functions, noncore functions such as servicing and managing technology will come under scrutiny as possible candidates for outsourcing to reduce the hospital's administrative responsibilities and cut its cost burden. In this article, we review the recent past of the medical equipment service industry and describe some current trends that will play a role in shaping the future of this industry. We also discuss how the changes currently taking place will likely affect the viability of in-house clinical engineering departments. In our discussion, we spotlight service issues related to radiology equipment because (1) this equipment dominates service expenditures and (2) the servicing of these devices has spawned some of the changes causing hospitals to reexamine how all their medical equipment is being serviced and managed.

  7. Radar principles

    NASA Technical Reports Server (NTRS)

    Sato, Toru

    1989-01-01

    Discussed here is a kind of radar called atmospheric radar, which has as its target clear air echoes from the earth's atmosphere produced by fluctuations of the atmospheric index of refraction. Topics reviewed include the vertical structure of the atmosphere, the radio refractive index and its fluctuations, the radar equation (a relation between transmitted and received power), radar equations for distributed targets and spectral echoes, near field correction, pulsed waveforms, the Doppler principle, and velocity field measurements.

  8. Ground equipment for the support of packet telemetry and telecommand

    NASA Technical Reports Server (NTRS)

    Hell, Wolfgang

    1994-01-01

    This paper describes ground equipment for packet telemetry and telecommand which has been recently developed by industry for the European Space Agency. The architectural concept for this type of equipment is outlined and the actual implementation is presented. Focus is put on issues related to cross support and telescience as far as they affect the design of the interfaces to the users of the services provided by the equipment and to the management entities in charge of equipment control and monitoring.

  9. [The beginning of the first principles: the anthropic principle].

    PubMed

    González de Posada, Francisco

    2004-01-01

    The nowadays classical Anthropic Principle is put both in the historical perspective of the traditional problem of "the place of man in the Universe', and in the confluence of several scientific "border" issues, some of which, due to their problematical nature, are also subject of philosophical analysis. On the one hand, the scientific uses of the Principle, related to the initial and constitutional conditions of "our Universe", are enumerated, as they are supposedly necessary for the appearance and consequent development of Life--up to Man--. On the other, an organized collection of the principles of today's Physics is synthetically exhibited. The object of this work is to determine the intrinsic scientific nature of the Anthropic Principle, and the role it plays in the global frame of the principles of Physics (Astrophysics, Astrobiology and Cosmology).

  10. Principled Missing Data Treatments.

    PubMed

    Lang, Kyle M; Little, Todd D

    2016-04-04

    We review a number of issues regarding missing data treatments for intervention and prevention researchers. Many of the common missing data practices in prevention research are still, unfortunately, ill-advised (e.g., use of listwise and pairwise deletion, insufficient use of auxiliary variables). Our goal is to promote better practice in the handling of missing data. We review the current state of missing data methodology and recent missing data reporting in prevention research. We describe antiquated, ad hoc missing data treatments and discuss their limitations. We discuss two modern, principled missing data treatments: multiple imputation and full information maximum likelihood, and we offer practical tips on how to best employ these methods in prevention research. The principled missing data treatments that we discuss are couched in terms of how they improve causal and statistical inference in the prevention sciences. Our recommendations are firmly grounded in missing data theory and well-validated statistical principles for handling the missing data issues that are ubiquitous in biosocial and prevention research. We augment our broad survey of missing data analysis with references to more exhaustive resources.

  11. Environmental Control Issue.

    ERIC Educational Resources Information Center

    Environmental Science and Technology, 1978

    1978-01-01

    This issue is designed to give information on pollution control equipment, monitoring instruments, engineering services including analytical testing services, chemicals, and laboratory supply houses. Entries are in alphabetical order within each of the seven sections. The address and phone numbers of each company are included. (MA)

  12. RETRIEVAL EQUIPMENT DESCRIPTIONS

    SciTech Connect

    J. Steinhoff

    1997-08-25

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler.

  13. Equipment qualification risk scoping analyses: Results and conclusions

    SciTech Connect

    Bustard, L.D.; Kolaczkowski, A.M.

    1989-01-01

    Probabilistic risk assessment (PRA) techniques and insights have been employed during an investigation entitled the Equipment Qualification (EQ)-Risk Scoping Study to assess the risk significance of equipment qualification issues. This approach for evaluating EQ issues suggests that some issues are not risk significant while some have a significant potential to increase risk. For example, EQ issues associated with long term accident equipment operability are not risk significant. Alternatively, there are selected system operations that require equipment not qualified for important accident environments. Though the study demonstrated that PRA does provide insights that modify perceptions regarding the importance of various EQ issues, it should be noted that PRA methods currently cannot define the risk significance for some EQ issues. Additional discussion regarding the study's results and conclusions is provided. 6 refs.

  14. Principles of safety pharmacology.

    PubMed

    Pugsley, M K; Authier, S; Curtis, M J

    2008-08-01

    Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.).

  15. Laptop image transmission equipment

    NASA Astrophysics Data System (ADS)

    Mocenter, Michael M.

    1991-12-01

    Imagery and other visual information have become a critical element in planning and performing modern military operations. The effectiveness of this imagery information is often directly tied to the time it takes to get from the collector of this imagery to the user of the imagery. Hard copy distribution of annotated imagery to the tactical commander is hampered by the lack of effective communications paths, and the tactical use of hand held imagery is restricted by the lack of film processing facilities. The military has begun to rely on electronic imagery and digital communications technology for answers, with some success. The new obstacles created by applied electronic imagery are interoperability standards and effective use of communications bandwidth in a tactical environment. New technological developments in computer hardware/software have changed this situation by allowing for the gathering, dissemination, and transfer of near-real-time information to various intelligence audiences at any location. The Naval Air Development Center (NAVAIRDEVCEN) has coupled commercial-off-the-shelf (COTS) technology with National Image Transmission Formats (NITF) Standards to develop a Secondary Imagery Dissemination System (SIDS) package that is designed to meet the flexibility challenge of the tactical military environment. This tailorable SIDS package is called Laptop Image Transmission Equipment (LITE). The LITE system is an extension of the Navy's existing Fleet Imagery Support Terminal (FIST) into the man-portable tactical environment. As such, LITE development is focused on developing flexible imagery input (from sources such as filmless cameras) and connectivity to tactical communications paths and ruggedization/miniaturization issues. The LITE system, in prototype form, has already found application through operational use in special operations, counter narcotics operations, and classic air/ground/sea military operations. This paper provides an overview of the

  16. Engineer Equipment Mechanic.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on engineer equipment mechanics is designed to advance the professional competence of privates through sergeants as equipment mechanics, Military Occupation Specialty 1341, and is adaptable for nonmilitary instruction. Introductory materials include…

  17. Equipment & New Products.

    ERIC Educational Resources Information Center

    Poitras, Adrian W., Ed.

    1977-01-01

    Presents several new products and equipment for teaching college science courses such as laser optics bench, portable digital thermometer, solar energy furnaces and blackboard optics kit. A description of all equipment or products, cost, and addresses of manufacturers are also included. (HM)

  18. Adaptive Recreational Equipment.

    ERIC Educational Resources Information Center

    Schilling, Mary Lou, Ed.

    1983-01-01

    Designed for teachers interested in therapeutic recreation, the document lists sources of adaptive recreational equipment and their homemade counterparts. Brief descriptions for ordering or constructing recreational equipment for the visually impaired, poorly coordinated, physically impaired, and mentally retarded are given. Specific adaptations…

  19. Equipment & New Products.

    ERIC Educational Resources Information Center

    Poitras, Adrian W., Ed.

    1977-01-01

    Presents several new products and equipment for teaching college science courses such as laser optics bench, portable digital thermometer, solar energy furnaces and blackboard optics kit. A description of all equipment or products, cost, and addresses of manufacturers are also included. (HM)

  20. Equipment Operator 1 & C.

    ERIC Educational Resources Information Center

    Naval Education and Training Program Development Center, Pensacola, FL.

    The Rate Training Manual and Nonresident Career Course (RTM/NRCC) form a self-study package to assist Navy Equipment Operators First and Chief in fulfilling the requirements of their rating. (Navy Equipment Operators First and Chief direct and coordinate efforts of individuals and crews in construction, earthmoving, roadbuilding, quarrying, and…

  1. Test Equipment Management.

    DTIC Science & Technology

    1985-01-01

    1 1 Terminology. .. .................. .. . .... 1 Importance . ........... .............. 1- 3 Report Organization. .. ................... 1...the composite of ETE (limited to manual test equipment only, including both general and special purpose), ATE, and TPSs. IMPORTANCE The need for...aviation weapon systems, is the Support Equipment Recommendation Data ( SERD ). The prime contractor for the weapon system usually prepares the SERD and

  2. Technology Equipment Rooms.

    ERIC Educational Resources Information Center

    Day, C. William

    2001-01-01

    Examines telecommunications equipment room design features that allow for growth and can accommodate numerous equipment replacements and upgrades with minimal service disruption and with minimal cost. Considerations involving the central hub, power and lighting needs, air conditioning, and fire protection are discussed. (GR)

  3. AUDIOVISUAL EQUIPMENT STANDARDS.

    ERIC Educational Resources Information Center

    PATTERSON, PIERCE E.; AND OTHERS

    RECOMMENDED STANDARDS FOR AUDIOVISUAL EQUIPMENT WERE PRESENTED SEPARATELY FOR GRADES KINDERGARTEN THROUGH SIX, AND FOR JUNIOR AND SENIOR HIGH SCHOOLS. THE ELEMENTARY SCHOOL EQUIPMENT CONSIDERED WAS THE FOLLOWING--CLASSROOM LIGHT CONTROL, MOTION PICTURE PROJECTOR WITH MOBILE STAND AND SPARE REELS, COMBINATION 2 INCH X 2 INCH SLIDE AND FILMSTRIP…

  4. Equipment Operator 1 & C.

    ERIC Educational Resources Information Center

    Naval Education and Training Program Development Center, Pensacola, FL.

    The Rate Training Manual and Nonresident Career Course (RTM/NRCC) form a self-study package to assist Navy Equipment Operators First and Chief in fulfilling the requirements of their rating. (Navy Equipment Operators First and Chief direct and coordinate efforts of individuals and crews in construction, earthmoving, roadbuilding, quarrying, and…

  5. Technology Equipment Rooms.

    ERIC Educational Resources Information Center

    Day, C. William

    2001-01-01

    Examines telecommunications equipment room design features that allow for growth and can accommodate numerous equipment replacements and upgrades with minimal service disruption and with minimal cost. Considerations involving the central hub, power and lighting needs, air conditioning, and fire protection are discussed. (GR)

  6. [Ethical issues of artificial nutritional support].

    PubMed

    Weimann, Arved

    2014-03-01

    This review article discusses some ethical issues of clinical nutrition according to the Beauchamp and Childress principles of bioethics: "respect for autonomy, nonmaleficence, beneficence, and justice".

  7. Reversing the Balance Wheel Principle

    ERIC Educational Resources Information Center

    Orkodashvili, Mariam

    2008-01-01

    The paper discusses funding principles and policies of higher education during the recession period. The role of state appropriations for the viability of public higher education institutions is emphasized. State funding affecting institutional behaviour is another issue raised. The paper analyzes the possibility of expanding state funding for…

  8. Basic Scientific Principles of Diving

    ERIC Educational Resources Information Center

    MacLean, Don

    1976-01-01

    Described are some of the physical and physiological scientific principles related to diving. The article is written as supplementary information for a teacher and includes suggested activities, a keyed test, and a bibliography. This article complements one on Sea Lab II in the same issue. (MA)

  9. 43 CFR 12.934 - Equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... shall issue disposition instructions within 120 calendar days after receipt of a final inventory. The... Institutions of Higher Education, Hospitals, and Other Non-Profit Organizations Post-Award Requirements § 12... identified to indicate Federal ownership. (3) A physical inventory of equipment shall be taken and...

  10. 38 CFR 49.34 - Equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... shall issue disposition instructions within 120 calendar days after receipt of a final inventory. The... ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER... identified to indicate Federal ownership. (3) A physical inventory of equipment shall be taken and...

  11. The Spin Zone: Choosing Laundry Equipment.

    ERIC Educational Resources Information Center

    Milshtein, Amy

    2003-01-01

    Discusses whether or not a college or university should own its own laundry equipment or contract out laundry services, including machine maintenance, and outlines the advantages of different types of washing machines for the student housing setting. Also reviews issues related to payment methods. (SLD)

  12. 29 CFR 97.32 - Equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... project for which it was acquired. If the Federal awarding agency fails to issue disposition instructions... section. (c) Use. (1) Equipment shall be used by the grantee or subgrantee in the program or project for which it was acquired as long as needed, whether or not the project or program continues to be supported...

  13. Teaching professionalism: general principles.

    PubMed

    Cruess, Richard L; Cruess, Sylvia R

    2006-05-01

    There are educational principles that apply to the teaching of professionalism during undergraduate education and postgraduate training. It is axiomatic that there is a single cognitive base that applies with increasing moral force as students enter medical school, progress to residency or registrar training, and enter practice. While parts of this body of knowledge are easier to teach and learn at different stages of an individual's career, it remains a definable whole at all times and should be taught as such. While the principle that self-reflection on theoretical and real issues encountered in the life of a student, resident or practitioner is essential to the acquisition of experiential learning and the incorporation of the values and behaviors of the professional, the opportunities to provide situations where this can take place will change as an individual progresses through the system, as will the sophistication of the level of learning. Teaching the cognitive base of professionalism and providing opportunities for the internalization of its values and behaviors are the cornerstones of the organization of the teaching of professionalism at all levels. Situated learning theory appears to provide practical guidance as to how this may be implemented. While the application of this theory will vary with the type of curriculum, the institutional culture and the resources available, the principles outlined should remain constant.

  14. [Medical Equipment Maintenance Methods].

    PubMed

    Liu, Hongbin

    2015-09-01

    Due to the high technology and the complexity of medical equipment, as well as to the safety and effectiveness, it determines the high requirements of the medical equipment maintenance work. This paper introduces some basic methods of medical instrument maintenance, including fault tree analysis, node method and exclusive method which are the three important methods in the medical equipment maintenance, through using these three methods for the instruments that have circuit drawings, hardware breakdown maintenance can be done easily. And this paper introduces the processing methods of some special fault conditions, in order to reduce little detours in meeting the same problems. Learning is very important for stuff just engaged in this area.

  15. The role of equipment in endoscopic complications.

    PubMed

    Suchanek, Stepan; Grega, Tomas; Zavoral, Miroslav

    2016-10-01

    The role of the surrounding equipment in endoscopic complications has not been published widely. However, an adequate understanding of the advantages and disadvantages of such devices might be helpful to avoid unnecessary problems during endoscopy. This is an overview of the basic principles, benefits and possible harms of electrical power units, medical gases and vital sign monitoring equipment. The aim of this review is to summarize current knowledge about the approach to the electrosurgical unit settings; periprocedural precautions, minimizing the risk of interference between endoscopic equipment and other electrical devices; the appropriate selection of instruments regarding the electrosurgical outcome and the role of carbon dioxide, argon plasma coagulation, pulse oximetry and capnography. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Equipment & New Products.

    ERIC Educational Resources Information Center

    Poitras, Adrian W., Ed.

    1979-01-01

    Reviews new science equipment and products for the laboratory. Includes hand-held calculators, fiberglass fume hoods, motorized microtomy, disposable mouse cages, and electric timers. Describes 11 products total. Provides manufacturer name, address, and price. (MA)

  17. Selecting Library Furniture & Equipment.

    ERIC Educational Resources Information Center

    Media & Methods, 1997

    1997-01-01

    Offers suggestions for selecting school library furniture and equipment. Describes various models of computer workstations; reading tables and chairs; and shelving. Sidebar lists names and addresses of library furniture manufactures and distributors. (AEF)

  18. Leasing versus buying equipment.

    PubMed

    Grossman, R

    1983-01-01

    For the upgrading of equipment that is necessary in radiologic practice, leasing is more convenient and less expensive than buying. Changes in tax laws, embodied in the Economic Recovery Act of 1981, have increased tax benefits of this arrangement.

  19. Equipment & New Products.

    ERIC Educational Resources Information Center

    Poitras, Adrian W., Ed.

    1979-01-01

    Reviews new science equipment and products for the laboratory. Includes hand-held calculators, fiberglass fume hoods, motorized microtomy, disposable mouse cages, and electric timers. Describes 11 products total. Provides manufacturer name, address, and price. (MA)

  20. Theoretical principles for biology: Variation.

    PubMed

    Montévil, Maël; Mossio, Matteo; Pocheville, Arnaud; Longo, Giuseppe

    2016-10-01

    Darwin introduced the concept that random variation generates new living forms. In this paper, we elaborate on Darwin's notion of random variation to propose that biological variation should be given the status of a fundamental theoretical principle in biology. We state that biological objects such as organisms are specific objects. Specific objects are special in that they are qualitatively different from each other. They can undergo unpredictable qualitative changes, some of which are not defined before they happen. We express the principle of variation in terms of symmetry changes, where symmetries underlie the theoretical determination of the object. We contrast the biological situation with the physical situation, where objects are generic (that is, different objects can be assumed to be identical) and evolve in well-defined state spaces. We derive several implications of the principle of variation, in particular, biological objects show randomness, historicity and contextuality. We elaborate on the articulation between this principle and the two other principles proposed in this special issue: the principle of default state and the principle of organization. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Assistive Technology & Inclusion. Issue Brief.

    ERIC Educational Resources Information Center

    Sax, Caren; And Others

    This paper uses a case study of the inclusion of a deaf-blind child with cognitive disabilities to explain principles of applying assistive technology in inclusive educational settings. The 12-year-old's progress from a special school four years previously to full inclusion is recounted with emphasis on use of such adaptive equipment as adapted…

  2. Automatic Test Equipment

    DTIC Science & Technology

    1980-02-28

    Search Terms Automatic Test Equipment Frequency Analyzers Oscilloscopes Pulse Analyzers Signal Generators "Etc." Third Level Search Guided...VAST Building Block Equipment RF Test Point Control Switch Digital Multimeter Frequency and Time Interval Meter Digital Word Generator Delay...Generator RF Amplifier, 95 Hz-2 GHz RF Amplifier, 2-4 GHz RF Amplifier, 4-8 GHz RF Amplifier, 8-12.2 GHz Signal Generator, 0.1 Hz-50 kHz

  3. Medical equipment management strategies.

    PubMed

    Wang, Binseng; Furst, Emanuel; Cohen, Ted; Keil, Ode R; Ridgway, Malcolm; Stiefel, Robert

    2006-01-01

    Clinical engineering professionals need to continually review and improve their management strategies in order to keep up with improvements in equipment technology, as well as with increasing expectations of health care organizations. In the last 20 years, management strategies have evolved from the initial obsession with electrical safety to flexible criteria that fit the individual institution's needs. Few hospitals, however, are taking full advantage of the paradigm shift offered by the evolution of joint Commission standards. The focus should be on risks caused by equipment failure, rather than on equipment with highest maintenance demands. Furthermore, it is not enough to consider risks posed by individual pieces of equipment to individual patients. It is critical to anticipate the impact of an equipment failure on larger groups of patients, especially when dealing with one of a kind, sophisticated pieces of equipment that are required to provide timely and accurate diagnoses for immediate therapeutic decisions or surgical interventions. A strategy for incorporating multiple criteria to formulate appropriate management strategies is provided in this article.

  4. Listing of Food Service Equipment.

    ERIC Educational Resources Information Center

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    A comprehensive listing of food service equipment including--(1) companies authorized to use the National Sanitation Foundation seal of approval, and (2) equipment listed as meeting NSF standards including soda fountains, spray-type dishwashers, dishwashing equipment, cooking equipment, commerical cooking and warming equipment, freezers,…

  5. The Effectiveness of Core ER Principles

    ERIC Educational Resources Information Center

    Jeon, Eun-Young; Day, Richard R.

    2015-01-01

    This discussion piece continues the discussion forum on extensive reading (ER) from the April 2015 issue of "Reading in a Foreign Language." In that forum, a number of the discussions were concerned with the principles of ER (Day & Bamford, 2002) in implementing ER. Our discussion also concerns the principles; we examine ER programs…

  6. The Effectiveness of Core ER Principles

    ERIC Educational Resources Information Center

    Jeon, Eun-Young; Day, Richard R.

    2015-01-01

    This discussion piece continues the discussion forum on extensive reading (ER) from the April 2015 issue of "Reading in a Foreign Language." In that forum, a number of the discussions were concerned with the principles of ER (Day & Bamford, 2002) in implementing ER. Our discussion also concerns the principles; we examine ER programs…

  7. EPA’s Response Equipment

    EPA Pesticide Factsheets

    EPA maintains a variety of equipment to respond to hazardous substance emergencies such as releases or oil spills regardless of their nature, size, or location. This include ASPECT, PHILIS, Equipment Module (EM), and personal protective equipment.

  8. About Personal Protective Equipment (PPE)

    MedlinePlus

    ... Equipment for Infection Control Questions About Personal Protective Equipment (PPE) Share Tweet Linkedin Pin it More sharing ... Print Q1. How do manufacturers ensure personal protective equipment (PPE) is safe and effective? A1. To help ...

  9. Twenty-Second Annual NASA Supply and Equipment Management Conference

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The status of actions from the 1988 conference is reviewed. Environmental safety issues, definitions, and regulations; contract transition, payload logistics transition, and safety and support equipment; supply products and services, bar code technology, and inventory accuracy; equipment management workshop topics; and contract property workshop topics are outlined.

  10. 40 CFR 63.1281 - Control equipment requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... in a thermal treatment unit for which the owner or operator has been issued a final permit under 40... reactivated in a thermal treatment unit equipped with and operating organic air emission controls in accordance with this section. (C) Regenerated or reactivated in a thermal treatment unit equipped with...

  11. Prioritizing equipment for replacement.

    PubMed

    Capuano, Mike

    2010-01-01

    It is suggested that clinical engineers take the lead in formulating evaluation processes to recommend equipment replacement. Their skill, knowledge, and experience, combined with access to equipment databases, make them a logical choice. Based on ideas from Fennigkoh's scheme, elements such as age, vendor support, accumulated maintenance cost, and function/risk were used.6 Other more subjective criteria such as cost benefits and efficacy of newer technology were not used. The element of downtime was also omitted due to the data element not being available. The resulting Periop Master Equipment List and its rationale was presented to the Perioperative Services Program Council. They deemed the criteria to be robust and provided overwhelming acceptance of the list. It was quickly put to use to estimate required capital funding, justify items already thought to need replacement, and identify high-priority ranked items for replacement. Incorporating prioritization criteria into an existing equipment database would be ideal. Some commercially available systems do have the basic elements of this. Maintaining replacement data can be labor-intensive regardless of the method used. There is usually little time to perform the tasks necessary for prioritizing equipment. However, where appropriate, a clinical engineering department might be able to conduct such an exercise as shown in the following case study.

  12. Equivalence principles and electromagnetism

    NASA Technical Reports Server (NTRS)

    Ni, W.-T.

    1977-01-01

    The implications of the weak equivalence principles are investigated in detail for electromagnetic systems in a general framework. In particular, it is shown that the universality of free-fall trajectories (Galileo weak equivalence principle) does not imply the validity of the Einstein equivalence principle. However, the Galileo principle plus the universality of free-fall rotation states does imply the Einstein principle.

  13. Ariane 5 - Design principles and development status

    NASA Astrophysics Data System (ADS)

    Hergott, R.

    1990-03-01

    The missions, design principles, main design features, and development status of the Ariane 5 are discussed. The special arrangements made for the launch of commercial payloads and for the Hermes launch are pointed out. The present status of the launch vehicle system, cryotechnic stage, solid propellant booster, upper stage, and vehicle equipment bay are described.

  14. German mining equipment

    SciTech Connect

    Not Available

    1993-10-01

    The German mining equipment industry developed to supply machines and services to the local mining industry, i.e., coal, lignite, salt, potash, ore mining, industrial minerals, and quarrying. The sophistication and reliability of its technology also won it worldwide export markets -- which is just as well since former major domestic mining sectors such as coal and potash have declined precipitously, and others such as ore mining have all but disappeared. Today, German mining equipment suppliers focus strongly on export sales, and formerly unique German mining technologies such as continuous mining with bucket wheel excavators and conveyors for open pits, or plowing of underground coal longwalls are widely used abroad. The status of the German mining equipment industry is reviewed.

  15. AST inspection methods and equipment

    SciTech Connect

    Burns, R.C.; Acosta, N.J.; Lim, R.

    1995-12-31

    Changes in the regulatory climate regarding Aboveground Storage Tanks (ASTs) and the costs of properly operating and maintaining these structures across the country are resulting in an ever-increasing need for more refined inspection techniques to detect leaks in tanks. The growing maze of new rules and regulations being imposed on tank owners and operators makes the early detection of leaks in storage tanks a desirable goal in order to minimize the results of any unwanted release of stored product to the environment. The costs of removing tanks from service and making repairs to fix problems or to avoid future problems also makes detection of possible leak paths for storage tanks a desirable goal. Much attention is currently being brought by many different parties to the issue of advancing methods of leak detection for storage tanks. A review of the current state of AST inspection methods and equipment may prove informative.

  16. Equipment Operational Requirements

    SciTech Connect

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  17. Sticking to its principles.

    PubMed

    1992-03-27

    Planned Parenthood says that rather than accept the Bush administration's gag rule it will give up federal funding of its operations. The gag rule forbids professionals at birth control clinics from even referring to abortion as an option to a pregnant woman, much less recommending one. President Bush has agreed to a policy which allows physicians but no one else at clinics to discuss abortion in at least some cases. In his view, according to White House officials, this was an admitted attempt to straddle the issue. Why he would want to straddle is understandable. The right wing of his party, which has always been suspicious of Mr. Bush, is pushing him to uphold what it regards as the Reagan legacy on this issue. The original gag rule, which prevented even physicians from discussing abortion as an option in almost all cases, was issued in the last presidents's 2nd term and upheld last year by the Supreme Court. Give Planned Parenthood credit for sticking to its principles. A lot of recipients of all sorts of federal funds want it both ways, take the money but not accept federal policy guidelines. When they find they can't, many "rise above principle," take the money and adjust policy accordingly. It is not going to be easy for Planned Parenthood now. Federal funds account for a significant portion of the organizations's budgets. Planned Parenthood of Maryland, for example, gets about $500,000 a year from the federal government, or about 12-13% of its total budget. It will either have to cut back on its services or increase its fundraising from other sources or charge women more for services--or all of those things. This is not the end of the story. It is certainly not the end of the political story. Pat Buchanan said of the new regulations, "I like the old position, to be quite candid." Thank goodness he never won a primary. George Bush would not have moved even as far as he hid on the gag rule. There will be a lot of agreement with the Buchanan view at the

  18. Engineer Equipment Chief.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the skills needed by engineer equipment chiefs. Addressed in the five individual units of the course are the following topics: construction management (planning, scheduling, and supervision);…

  19. Engineer Equipment Operator.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the skills needed by engineer equipment operators. Addressed in the seven individual units of the course are the following topics: introduction to Military Occupation Specialty (MOS) 1345…

  20. Dairy Equipment Lubrication

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Lake To Lake Dairy Cooperative, Manitowoc, Wisconsin, operates four plants in Wisconsin for processing milk, butter and cheese products from its 1,300 member farms. The large co-op was able to realize substantial savings by using NASA information for improved efficiency in plant maintenance. Under contract to Marshall Space Flight Center, Midwest Research Institute compiled a handbook consolidating information about commercially available lubricants. The handbook details chemical and physical properties, applications, specifications, test procedures and test data for liquid and solid lubricants. Lake To Lake's plant engineer used the handbook to effect savings in maintenance labor and materials costs by reducing the number of lubricants used on certain equipment. Strict U.S. Department of Agriculture and Food and Drug Administration regulations preclude lubrication changes n production equipment, but the co-op's maintenance chief was able to eliminate seven types of lubricants for ancillary equipment, such as compressors and high pressure pumps. Handbook data enabled him to select comparable but les expensive lubricants in the materials consolidation process, and simplified lubrication schedules and procedures. The handbook is in continuing use as a reference source when a new item of equipment is purchased.

  1. Basic Engineer Equipment Mechanic.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the skills needed by basic engineer equipment mechanics. Addressed in the four individual units of the course are the following topics: mechanics and their tools (mechanics, hand tools, and power…

  2. Equipment & New Products.

    ERIC Educational Resources Information Center

    Poitras, Adrian W., Ed.

    1977-01-01

    Presents information about equipment and new products such as the melting point instrument and TV-microscope coupler which are helpful in college science teaching. Descriptions of each product, how it operates, its prices, and address for ordering are presented. (HM)

  3. Equipping tomorrow's fire manager

    Treesearch

    Christopher A. Dicus

    2008-01-01

    Fire managers are challenged with an ever-increasing array of both responsibilities and critics. As in the past, fire managers must master the elements of fire behavior and ecology using the latest technologies. In addition, today’s managers must be equipped with the skills necessary to understand and liaise with a burgeoning group of vocal stakeholders while also...

  4. Equipment & New Products.

    ERIC Educational Resources Information Center

    Poitras, Adrian W., Ed.

    1977-01-01

    Presents information about equipment and new products such as the melting point instrument and TV-microscope coupler which are helpful in college science teaching. Descriptions of each product, how it operates, its prices, and address for ordering are presented. (HM)

  5. Education Demonstration Equipment

    NASA Astrophysics Data System (ADS)

    Nagy, A.; Lee, R. L.

    2003-10-01

    The General Atomics fusion education program ``Scientist in the Classroom" (SIC) now in its sixth year, uses scientists and engineers to present plasma as a state of matter to students in the classroom. Using hands-on equipment, students see how magnets, gas pressure changes, and different gases are turned into plasmas. A piston, sealed volume, and vacuum chamber illuminate ideal gas laws. Liquid nitrogen is used to explore thermodynamic temperature effects and changes in states of matter. Light bulbs are excited with a Tesla coil to ionize gases, thus becoming an inexpensive plasma devices and a plasma tube shows magnetic interactions with plasma. The demonstration equipment used in this program is built with simple designs and common commercial equipment keeping in mind a teacher's tight budget. The SIC program ( ˜25 school presentations per year) has become very popular and has acquired an enthusiastic group of regular teacher clientele requesting repeat visits. In addition, three very popular and successful ``Build-It" days, sponsored by the General Atomics Fusion Education Outreach Program, enables teachers to build and keep in their classroom some of this equipment. The demonstration devices will be presented along with their ``build-it" details.

  6. Homemade Innovative Play Equipment.

    ERIC Educational Resources Information Center

    Pearson, L. Roger, Comp.

    Sponsored by the Title III Elementary and Secondary Education Act Project "Discovery Outdoor Education", this guide is a collection of inexpensive, innovative, homemade equipment and devices for physical activities. Although designed for the impaired, disabled, and handicapped, these materials are adaptable to and applicable for groups…

  7. Lennox - Student Training Equipment.

    ERIC Educational Resources Information Center

    Lennox Industries, Inc., Marshalltown, IA.

    Presents a series of demonstration units designed by Lennox Industries for the purpose of training students to become familiar with Lennox mechanical equipment. Demonstrators are designed to present technical information in a clear simplified manner thus reducing frustration for the beginning trainee. The following demonstrators are available--(1)…

  8. Total equipment parts configuration

    SciTech Connect

    Ferrare, J.; Panzani, F.

    1989-01-01

    Florida Power Lights's (FP L's) Turkey Point units were built prior to the establishment of American Society of Mechanical Engineers' Sec. III requirements. Since that time, FP L has voluntarily committed to procuring some spare and replacement parts in compliance with the ordering requirements of ASME Sec. III. New subsystems were designed according to ASME Sec. III requirements. In 1978, 10CFR21 of the Code of Federal Regulations was federally mandated. Environmental qualification concerns and the Three Mile Island incident further complicated the stocking and ordering of spare and replacement parts. Turkey Point assembled a team of quality assurance, quality control, and engineering people and obtained permission to directly access the store department computer so that catalog descriptions could be quickly made available for use by the plant. The total equipment parts configuration (TEPC) system was designed and developed under the direction of the procurement document review team at the Turkey Point nuclear plant. The system is a network of related computer data bases that identifies the equipment at the plant. The equipment (or components that make up a piece of equipment) is identified by a tag/component code system. Each component is further broken down by the manufacturer's parts list or bill of material. A description of the data available to the user, the ways these data can be accessed and displayed, and a description of the data bases and their relation to each other are summarized in this paper.

  9. Lennox - Student Training Equipment.

    ERIC Educational Resources Information Center

    Lennox Industries, Inc., Marshalltown, IA.

    Presents a series of demonstration units designed by Lennox Industries for the purpose of training students to become familiar with Lennox mechanical equipment. Demonstrators are designed to present technical information in a clear simplified manner thus reducing frustration for the beginning trainee. The following demonstrators are available--(1)…

  10. STDN ranging equipment

    NASA Technical Reports Server (NTRS)

    Jones, C. E.

    1975-01-01

    Final results of the Spaceflight Tracking and Data Network (STDN) Ranging Equipment program are summarized. Basic design concepts and final design approaches are described. Theoretical analyses which define requirements and support the design approaches are presented. Design verification criteria are delineated and verification test results are specified.

  11. Vocational Education Equipment Standards. Revised.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

    This document lists equipment and equipment-like supplies used in classrooms in nine vocational education programs in North Carolina. It was prepared to help local educational agencies assess the adequacy of their vocational education equipment; identify and plan for equipment purchases to meet the minimum requirements; and determine the…

  12. Issues in biomedical ethics.

    PubMed

    Vevaina, J R; Nora, L M; Bone, R C

    1993-12-01

    Bioethics is the discipline of ethics dealing with moral problems arising in the practice of medicine and the pursuit of biomedical research. Physicians may confront ethical dilemmas regularly in their individual relationships with patients and in institutional and societal decisions on health care policy. Ethical problem solving requires the application of certain ethical rules and principles to specific situations. Although ethical theories differ, certain ethical rules and principles appear consistently. These include nonmaleficence, beneficence, respect for individual autonomy, confidentiality, and justice. This article discusses some of the ethical issues that arise in clinical practice, including informed consent, do-not-resuscitate orders, noninitiation and termination of medical therapy, genetic intervention, allocation of scarce health resources, and infection with the human immunodeficiency virus (HIV). Some of these problems require ethical analysis at the bedside; others require physician involvement on a broader level. Perspectives on the different ethical issues are presented; however, absolute answers to these ethical dilemmas are not provided. Interpretation of the ethical principles and the application of these principles to each clinical situation demands the thoughtful attention of the practitioner.

  13. Ethical issues in publication.

    PubMed

    Hamblet, J L

    1996-04-01

    Nurses usually publish to disseminate pertinent information and research findings. Their articles and textbooks promote quality patient care and sound professional practice. Nurses may also publish to meet requirements for academic promotion and professional advancement. Ethical issues play a part in any phase of writing for publication. Veracity, justice, beneficence, and nonmaleficence are four of the ethical principles that pertain to aspects of authorship, peer review, and research in publication.

  14. A complex method of equipment replacement planning. An advanced plan for the replacement of medical equipment.

    PubMed

    Dondelinger, Robert M

    2004-01-01

    This complex method of equipment replacement planning is a methodology; it is a means to an end, a process that focuses on equipment most in need of replacement, rather than the end itself. It uses data available from the maintenance management database, and attempts to quantify those subjective items important [figure: see text] in making equipment replacement decisions. Like the simple method of the last issue, it is a starting point--albeit an advanced starting point--which the user can modify to fit their particular organization, but the complex method leaves room for expansion. It is based on sound logic, documented facts, and is fully defensible during the decision-making process and will serve your organization well as provide a structure for your equipment replacement planning decisions.

  15. AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XIV, UNDERSTANDING DC GENERATOR PRINCIPLES.

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATING PRINCIPLES OF DIRECT CURRENT GENERATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE (1) WHAT IS A GENERATOR AND ITS USE, (2) SHUNT GENERATOR PRINCIPLES, (3) POWER AND RATINGS OF A GENERATOR, (4) ARMATURE REACTION, (5) WHAT IS POLARITY, (6) TWO GENERATOR…

  16. Regulatory issues.

    PubMed

    Molinuevo, José L; Blesa, Rafael

    2003-01-01

    Any medical decision generates consequences for the patient and for society. Medical practice should, therefore, be performed under the guidance of the following ethical principles: beneficence, nonmaleficence, autonomy, justice, integrity, dignity, and vulnerability. The overarching objective of clinical research is to develop knowledge to improve health, and the subjects who participate are the means to securing such knowledge. Clinical research, as part of medical practice, should be ruled by the same ethical principles.

  17. Stiffness Parameter Design of Suspension Element of Under-Chassis-Equipment for A Rail Vehicle

    NASA Astrophysics Data System (ADS)

    Ma, Menglin; Wang, Chengqiang; Deng, Hai

    2017-06-01

    According to the frequency configuration requirements of the vibration of railway under-chassis-equipment, the three- dimension stiffness of the suspension elements of under-chassis-equipment is designed based on the static principle and dynamics principle. The design results of the concrete engineering case show that, compared with the design method based on the static principle, the three- dimension stiffness of the suspension elements designed by the dynamic principle design method is more uniform. The frequency and decoupling degree analysis show that the calculation frequency of under-chassis-equipment under the two design methods is basically the same as the predetermined frequency. Compared with the design method based on the static principle, the design method based on the dynamic principle is adopted. The decoupling degree can be kept high, and the coupling vibration of the corresponding vibration mode can be reduced effectively, which can effectively reduce the fatigue damage of the key parts of the hanging element.

  18. Orbiter based construction equipment

    NASA Technical Reports Server (NTRS)

    Goodwin, C. J.

    1982-01-01

    Many orbiter based activities need equipment to hold a payload steady while it is being worked on. This work may be construction, updating, repair, services, check out, or refueling operations in preparation for return to Earth. The Handling and Positioning Aid (HPA) is intended for use as general purpose equipment. The HPA provides a wide choice of work station positions, both immediately above the orbiter cargo bay and beyond. It can act in a primary docking role and, if required, can assist actively in the berthing process. From an analysis of ten reference missions, it was determined that two types of HPA mobility are needed; a tilt table, which simply swings out of the cargo bay, pivoting about an athwartships y axis, and an articulated arm. Illustration of the aid are provided.

  19. Astronomical Equipment for Amateurs

    NASA Astrophysics Data System (ADS)

    Mobberley, Martin

    Telescopes - refractors and reflectors - are the main items of equipment used by almost every amateur astronomer. The purpose of astronomical telescopes is to collect and focus more light than the human eye can, forming an image that can be viewed, photographed, or analysed. Astronomical Equipment for Amateurs makes buying and using both telescopes and their ancillary instruments easy for astronomers of all abilities. It begins by looking at the advantages and disadvantages of the basic types of refractors, reflectors, mountings and accessories. Observation techniques are also included, along with the use of filters, (colour, anti-pollution and nebula), types of photography (piggy-back, prime focus and eyepiece projection), and also CCD imaging (including types of CCD camera and their advantages and disadvantages compared to photography). Martin Mobberley provides a fascinating insight into astronomical software.

  20. Equipment management in practice.

    PubMed

    Garrett, J A

    1984-01-01

    This article describes the setting up, funding and organization of an in-house equipment management service in the Bristol & Weston Health Authority. Existing resources were redeployed to form the present service. The range of equipment now maintained under the auspices of the Medical Physics Bioengineering Group has a capital value of 12 million pounds. All work is costed and a charge made to the client for whom work is carried out. A team of 27 medical physics technicians and three graduate engineers are maintained from this source of income. This method of funding is now making way for a system of job costing which will provide a basis for comparison with an outside service.

  1. Advanced service equipment

    NASA Technical Reports Server (NTRS)

    Mockovciak, J., Jr.

    1982-01-01

    Orbiter-based service equipment needs/usage are identified by considering a broad spectrum of on-orbit operational scenarios associated with three primary mission events: initial launch, revisits, and Earth return. Nominal and alternate modes of operation, contingency situations (as remote manipulator system inoperative), and Orbiter close proximity operations are included. Satellite classes considered are direct delivery and servicing of the orbiter, low Earth orbiter/propulsion, sorties and DOD, geosatellites, and planetary and other satellites.

  2. Equipment Failure Analysis

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Tennessee Eastman uses NASTRAN to minimize lost production by pinpointing the causes of equipment failures and preventing recurrences. An example of the program's utility involves a large centrifugal fan which developed cracks during start-ups and shutdowns. This information prompted redesign of the fan. Tennessee Eastman has made extensive use of NASTRAN, both as failure analysis tool and as an aid in redesigning production hardware.

  3. Secure authenticated video equipment

    SciTech Connect

    Doren, N.E.

    1993-07-01

    In the verification technology arena, there is a pressing need for surveillance and monitoring equipment that produces authentic, verifiable records of observed activities. Such a record provides the inspecting party with confidence that observed activities occurred as recorded, without undetected tampering or spoofing having taken place. The secure authenticated video equipment (SAVE) system provides an authenticated series of video images of an observed activity. Being self-contained and portable, it can be installed as a stand-alone surveillance system or used in conjunction with existing monitoring equipment in a non-invasive manner. Security is provided by a tamper-proof camera enclosure containing a private, electronic authentication key. Video data is transferred communication link consisting of a coaxial cable, fiber-optic link or other similar media. A video review station, located remotely from the camera, receives, validates, displays and stores the incoming data. Video data is validated within the review station using a public key, a copy of which is held by authorized panics. This scheme allows the holder of the public key to verify the authenticity of the recorded video data but precludes undetectable modification of the data generated by the tamper-protected private authentication key.

  4. 12. VIEW OF REMOTELY OPERATED EQUIPMENT. OPERATORS VIEWED THE EQUIPMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. VIEW OF REMOTELY OPERATED EQUIPMENT. OPERATORS VIEWED THE EQUIPMENT THROUGH A WATER-FILLED WINDOW. (10/8/81) - Rocky Flats Plant, Plutonium Recovery Facility, Northwest portion of Rocky Flats Plant, Golden, Jefferson County, CO

  5. 8. CONTROL AND EQUIPMENT ROOM INTERIOR. MECHANICAL EQUIPMENT ROOM AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. CONTROL AND EQUIPMENT ROOM INTERIOR. MECHANICAL EQUIPMENT ROOM AT RIGHT AND ENTRANCE AT LEFT. Looking east. - Edwards Air Force Base, South Base Sled Track, Firing Control Blockhouse, South of Sled Track at east end, Lancaster, Los Angeles County, CA

  6. Highway Maintenance Equipment Operator. Miscellaneous Equipment. Training Materials.

    ERIC Educational Resources Information Center

    Perky, Sandra Dutreau; And Others

    This curriculum guide provides instructional materials to assist in training equipment operators in the safe and effective use of highway maintenance equipment. It includes six units of instruction covering the small, specialized equipment used in maintenance operations. Each unit of instruction consists of eight basic components: performance…

  7. Highway Maintenance Equipment Operator. Specialized Equipment. Training Materials.

    ERIC Educational Resources Information Center

    Perky, Sandra Dutreau; And Others

    This curriculum guide provides instructional materials to assist in training equipment operators in the safe and effective use of highway maintenance equipment. It includes 18 units of instruction covering the large equipment used in maintenance operations. Each unit of instruction consists of eight basic components: performance objectives,…

  8. Getting Equipped and Staying Equipped, Part 2: Finding the Funds.

    ERIC Educational Resources Information Center

    Jordahl, Gregory; Orwig, Ann

    1995-01-01

    Suggests how school libraries can fund computer equipment; gain assistance from high-tech businesses; develop business partnerships and foundations; lease equipment; accept equipment donations; fund raise; build money into the budget; and communicate school needs with budget voters. Sidebars include leasing advice; resources for parent-teacher…

  9. Highway Maintenance Equipment Operator. Specialized Equipment. Training Materials.

    ERIC Educational Resources Information Center

    Perky, Sandra Dutreau; And Others

    This curriculum guide provides instructional materials to assist in training equipment operators in the safe and effective use of highway maintenance equipment. It includes 18 units of instruction covering the large equipment used in maintenance operations. Each unit of instruction consists of eight basic components: performance objectives,…

  10. 78 FR 38093 - Seventh Meeting: RTCA Special Committee 226, Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... Federal Aviation Administration Seventh Meeting: RTCA Special Committee 226, Audio Systems and Equipment... Notice of RTCA Special Committee 226, Audio Systems and Equipment. SUMMARY: The FAA is issuing this... Equipment ] DATES: The meeting will be held July 15-19, 2013 from 9:00 a.m.-5:00 p.m. ADDRESSES: The...

  11. 75 FR 47344 - Notice to Manufacturers of Foreign Object Debris (FOD) Detection Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ... Federal Aviation Administration Notice to Manufacturers of Foreign Object Debris (FOD) Detection Equipment... Debris (FOD) detection equipment. SUMMARY: Projects funded under the Airport Improvement Program (AIP... Administration is considering issuing waivers to foreign manufacturers of FOD detection equipment that meet the...

  12. 76 FR 79755 - First Meeting: RTCA Special Committee 226 Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-22

    ... Federal Aviation Administration First Meeting: RTCA Special Committee 226 Audio Systems and Equipment... RTCA Special Committee 226, Audio Systems and Equipment. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 226, Audio Systems and Equipment, for the first...

  13. Precision Instrument and Equipment Repairers.

    ERIC Educational Resources Information Center

    Wyatt, Ian

    2001-01-01

    Explains the job of precision instrument and equipment repairers, who work on cameras, medical equipment, musical instruments, watches and clocks, and industrial measuring devices. Discusses duties, working conditions, employment and earnings, job outlook, and skills and training. (JOW)

  14. TELEMETRY EQUIPMENT WITH DIGITAL READING,

    DTIC Science & Technology

    Contents: Basic peculiarities of telemetry equipment with digital reading ; Elements of pulse technology applied in telemetry equipment with digital... reading ; Digital reading systems; Telemetry systems with digital reading . (Author)

  15. How to Use Equipment Therapeutically.

    ERIC Educational Resources Information Center

    Bowne, Douglas

    1986-01-01

    Shares therapeutic and economic practices surrounding equipment used in New York's Higher Horizons adventure program of therapy for troubled youth. Encourages educators, therapists, and administrators to explore relationship between equipment selection, program goals, and clients. (NEC)

  16. The Issues.

    ERIC Educational Resources Information Center

    Boren, David L.

    Perspectives on issues in postsecondary education are presented with some reference to Oklahoma. Enrollment trends and the push toward cost effective educational programs are considered, and it is suggested that the important issue is often overlooked: the need to clarify the role of higher education institutions, or what society demands from the…

  17. How Many Principles for Public Health Ethics?

    PubMed

    Coughlin, Steven S

    2008-01-01

    General moral (ethical) principles play a prominent role in certain methods of moral reasoning and ethical decision-making in bioethics and public health. Examples include the principles of respect for autonomy, beneficence, nonmaleficence, and justice. Some accounts of ethics in public health have pointed to additional principles related to social and environmental concerns, such as the precautionary principle and principles of solidarity or social cohesion. This article provides an overview of principle-based methods of moral reasoning as they apply to public health ethics including a summary of advantages and disadvantages of methods of moral reasoning that rely upon general principles of moral reasoning. Drawing upon the literature on public health ethics, examples are provided of additional principles, obligations, and rules that may be useful for analyzing complex ethical issues in public health. A framework is outlined that takes into consideration the interplay of ethical principles and rules at individual, community, national, and global levels. Concepts such as the precautionary principle and solidarity are shown to be useful to public health ethics to the extent that they can be shown to provide worthwhile guidance and information above and beyond principles of beneficence, nonmaleficence, and justice, and the clusters of rules and maxims that are linked to these moral principles. Future directions likely to be productive include further work on areas of public health ethics such as public trust, community empowerment, the rights of individuals who are targeted (or not targeted) by public health interventions, individual and community resilience and wellbeing, and further clarification of principles, obligations, and rules in public health disciplines such as environmental science, prevention and control of chronic and infectious diseases, genomics, and global health.

  18. How Many Principles for Public Health Ethics?

    PubMed Central

    Coughlin, Steven S.

    2009-01-01

    General moral (ethical) principles play a prominent role in certain methods of moral reasoning and ethical decision-making in bioethics and public health. Examples include the principles of respect for autonomy, beneficence, nonmaleficence, and justice. Some accounts of ethics in public health have pointed to additional principles related to social and environmental concerns, such as the precautionary principle and principles of solidarity or social cohesion. This article provides an overview of principle-based methods of moral reasoning as they apply to public health ethics including a summary of advantages and disadvantages of methods of moral reasoning that rely upon general principles of moral reasoning. Drawing upon the literature on public health ethics, examples are provided of additional principles, obligations, and rules that may be useful for analyzing complex ethical issues in public health. A framework is outlined that takes into consideration the interplay of ethical principles and rules at individual, community, national, and global levels. Concepts such as the precautionary principle and solidarity are shown to be useful to public health ethics to the extent that they can be shown to provide worthwhile guidance and information above and beyond principles of beneficence, nonmaleficence, and justice, and the clusters of rules and maxims that are linked to these moral principles. Future directions likely to be productive include further work on areas of public health ethics such as public trust, community empowerment, the rights of individuals who are targeted (or not targeted) by public health interventions, individual and community resilience and wellbeing, and further clarification of principles, obligations, and rules in public health disciplines such as environmental science, prevention and control of chronic and infectious diseases, genomics, and global health. PMID:20072707

  19. NIH Standard. Animal Care Equipment.

    ERIC Educational Resources Information Center

    National Institutes of Health (DHEW), Bethesda, MD. Office of Administrative Management.

    The National Institutes of Health standardized animal care equipment is presented in this catalog. Each piece of equipment is illustrated and described in terms of overall dimensions, construction, and general usage. A price list is included to estimate costs in budgeting, planning, and requisitioning animal care equipment. The standards and…

  20. Safety Equipment in the Lab.

    ERIC Educational Resources Information Center

    Denham, Willard A.S.

    1964-01-01

    Findings of two recent surveys on safety equipment in laboratory facilities are presented. The first survey was a pilot study of emergency shower and eye wash equipment. This study was followed by a more comprehensive random survey of safety equipment in 2,820 labs. Among other findings, the surveys indicate that many plants are underequipped, or…

  1. Protective Equipment In Amateur Sport

    PubMed Central

    Nugent, Robert

    1974-01-01

    Injuries in amateur sports can be markedly reduced if athletes can be persuaded to wear the proper equipment. Four major sports are reviewed, and an outline given of protective equipment for each, with a description of the commonest injuries for each sport. Fit and maintenance of equipment are stressed. PMID:20469059

  2. Decision Analysis for Equipment Selection

    ERIC Educational Resources Information Center

    Cilliers, J. J.

    2005-01-01

    Equipment selection during process design is a critical aspect of chemical engineering and requires engineering judgment and subjective analysis. When educating chemical engineering students in the selection of proprietary equipment during design, the focus is often on the types of equipment available and their operating characteristics. The…

  3. Fluidization technologies: Aerodynamic principles and process engineering.

    PubMed

    Dixit, Rahul; Puthli, Shivanand

    2009-11-01

    The concept of fluidization has been adapted to different unit processes of pharmaceutical product development. Till date a lot of improvements have been made in the engineering design to achieve superior process performance. This review is focused on the fundamental principles of aerodynamics and hydrodynamics associated with the fluidization technologies. Fluid-bed coating, fluidized bed granulation, rotor processing, hot melt granulation, electrostatic coating, supercritical fluid based fluidized bed technology are highlighted. Developments in the design of processing equipments have been explicitly elucidated. This article also discusses processing problems from the operator's perspective along with latest developments in the application of these principles.

  4. Family Issues

    MedlinePlus

    ... National Conference Donate National Autism Awareness Month Shop Business Supporters Other Ways to Get Involved About Us About Us Guiding Principles History News Affiliate Network Board/Advisors Staff Services Financial Information Publications Partners Contact Us En Español En Español Donate Home ...

  5. Chemical Principls Exemplified

    ERIC Educational Resources Information Center

    Plumb, Robert C.

    1973-01-01

    Two topics are discussed: (1) Stomach Upset Caused by Aspirin, illustrating principles of acid-base equilibrium and solubility; (2) Physical Chemistry of the Drinking Duck, illustrating principles of phase equilibria and thermodynamics. (DF)

  6. Chemical Principls Exemplified

    ERIC Educational Resources Information Center

    Plumb, Robert C.

    1973-01-01

    Two topics are discussed: (1) Stomach Upset Caused by Aspirin, illustrating principles of acid-base equilibrium and solubility; (2) Physical Chemistry of the Drinking Duck, illustrating principles of phase equilibria and thermodynamics. (DF)

  7. Principles of project management

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The basic principles of project management as practiced by NASA management personnel are presented. These principles are given as ground rules and guidelines to be used in the performance of research, development, construction or operational assignments.

  8. Equipping the Force

    DTIC Science & Technology

    2012-03-12

    right, from the Mayaguez to Grenada , Panama, Somalia, the Balkans, Haiti, Kuwait, Iraq, and more.”27 Comments like this present argument that future...procurement processes are codified. On 01 April 1986, President Ronald Reagan issued National Security Decision Directive 219 to reform acquisitions. In

  9. The Principles of Asymmetry

    DTIC Science & Technology

    2005-05-26

    THE PRINCIPLES OF ASYMMETRY A monograph presented to the Faculty of the US Army School of Advanced Military Studies in...DATES COVERED Monograph 4. TITLE AND SUBTITLE The Principles pf Asymmetry 5. FUNDING NUMBERS 6. AUTHOR(S) Stephen D. Pomper Major, USA 7... principles of asymmetry. The ultimate goal of producing principles should allow soldiers to better appreciate a difficult, but important concept in

  10. Lunar construction/mining equipment

    NASA Technical Reports Server (NTRS)

    Ozdemir, Levent

    1990-01-01

    For centuries, mining has utilized drill and blast as the primary method of rock excavation. Although this technique has undergone significant improvements, it still remains a cyclic, labor intensive operation with inherent safety hazards. Other drawbacks include damage to the surrounding ground, creation of blast vibrations, rough excavation walls resulting in increased ventilation requirements, and the lack of selective mining ability. Perhaps the most important shortcoming of drill and blast is that it is not conducive to full implementation of automation or robotics technologies. Numerous attempts have been made in the past to automate drill and blast operations to remove personnel from the hazardous work environment. Although most of the concepts devised look promising on paper, none of them was found workable on a sustained production basis. In particular, the problem of serious damage to equipment during the blasting cycle could not be resolved regardless of the amount of charge used in excavation. Since drill and blast is not capable of meeting the requirements of a fully automated rock fragmentation method, its role is bound to gradually decrease. Mechanical excavation, in contrast, is highly suitable to automation because it is a continuous process and does not involve any explosives. Many of the basic principles and trends controlling the design of an earth-based mechanical excavator will hold in an extraterrestrial environment such as on the lunar surface. However, the economic and physical limitations for transporting materials to space will require major rethinking of these machines. In concept, then, a lunar mechanical excavator will look and perform significantly different from one designed for use here on earth. This viewgraph presentation gives an overview of such mechanical excavator systems.

  11. Lunar construction/mining equipment

    NASA Technical Reports Server (NTRS)

    Ozdemir, Levent

    1990-01-01

    For centuries, mining has utilized drill and blast as the primary method of rock excavation. Although this technique has undergone significant improvements, it still remains a cyclic, labor intensive operation with inherent safety hazards. Other drawbacks include damage to the surrounding ground, creation of blast vibrations, rough excavation walls resulting in increased ventilation requirements, and the lack of selective mining ability. Perhaps the most important shortcoming of drill and blast is that it is not conducive to full implementation of automation or robotics technologies. Numerous attempts have been made in the past to automate drill and blast operations to remove personnel from the hazardous work environment. Although most of the concepts devised look promising on paper, none of them was found workable on a sustained production basis. In particular, the problem of serious damage to equipment during the blasting cycle could not be resolved regardless of the amount of charge used in excavation. Since drill and blast is not capable of meeting the requirements of a fully automated rock fragmentation method, its role is bound to gradually decrease. Mechanical excavation, in contrast, is highly suitable to automation because it is a continuous process and does not involve any explosives. Many of the basic principles and trends controlling the design of an earth-based mechanical excavator will hold in an extraterrestrial environment such as on the lunar surface. However, the economic and physical limitations for transporting materials to space will require major rethinking of these machines. In concept, then, a lunar mechanical excavator will look and perform significantly different from one designed for use here on earth. This viewgraph presentation gives an overview of such mechanical excavator systems.

  12. National minimum standards for community equipment services.

    PubMed

    Donnelly, Brian

    2010-04-01

    There are approximately 10 million pieces of community equipment delivered to 3.5 million clients every year in England and Wales. The service is key for moving people safely around the whole health and social care system, and is used by almost every clinical professional working in the community. It is an absolute essential part of the early intervention and prevention agenda. Unfortunately, the service currently has no standards in place nor is it regulated or inspected in its own right by any of the regulators. Recently enacted legislation impacts significantly on this service area, which has serious penalties for failure. There are some concerning aspects of service delivery, particularly regarding quality and patient safety issues. Widespread failings in service delivery are resulting in a significant number of unnecessary fatalities and incidents, and avoidable costs being incurred. Undue care in this area is resulting in health and social care organizations not fully realizing their strategic and policy objectives. Unless community equipment is addressed appropriately, these issues are likely to be intensified, especially with recent and proposed changes for community equipment services, such as 'choice and control'. It is proposed that national minimum standards will reduce risks and improve quality and safety, while saving public funds through a reduction in secondary episodes of care.

  13. Chemical Principles Exemplified

    ERIC Educational Resources Information Center

    Plumb, Robert C.

    1970-01-01

    This is the first of a new series of brief ancedotes about materials and phenomena which exemplify chemical principles. Examples include (1) the sea-lab experiment illustrating principles of the kinetic theory of gases, (2) snow-making machines illustrating principles of thermodynamics in gas expansions and phase changes, and (3) sunglasses that…

  14. Chemical Principles Exemplified

    ERIC Educational Resources Information Center

    Plumb, Robert C.

    1970-01-01

    This is the first of a new series of brief ancedotes about materials and phenomena which exemplify chemical principles. Examples include (1) the sea-lab experiment illustrating principles of the kinetic theory of gases, (2) snow-making machines illustrating principles of thermodynamics in gas expansions and phase changes, and (3) sunglasses that…

  15. Emerging Issues.

    ERIC Educational Resources Information Center

    Carter, Denise

    1988-01-01

    Youth services programs and cholesterol in children's diets, two topics that may emerge as issues in schools and school districts in the near future, are addressed. Resources for further information are listed. (CB)

  16. Orbital construction support equipment

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Approximately 200 separate construction steps were defined for the three solar power satellite (SPS) concepts. Detailed construction scenarios were developed which describe the specific tasks to be accomplished, and identify general equipment requirements. The scenarios were used to perform a functional analysis, which resulted in the definition of 100 distinct SPS elements. These elements are the components, parts, subsystems, or assemblies upon which construction activities take place. The major SPS elements for each configuration are shown. For those elements, 300 functional requirements were identified in seven generic processes. Cumulatively, these processes encompass all functions required during SPS construction/assembly. Individually each process is defined such that it includes a specific type of activity. Each SPS element may involve activities relating to any or all of the generic processes. The processes are listed, and examples of the requirements defined for a typical element are given.

  17. Lightweighting Issues

    DTIC Science & Technology

    2006-02-27

    Lightweighting Issues "Need to be faster, more agile, less bureaucratic - Need to Fight this everyday" Report Documentation Page Form ApprovedOMB No. 0704...4. TITLE AND SUBTITLE Lightweighting Issues 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Thomas Mathes 5d...practices • Designed for force-on-force engagement • Cumbersome logistics tail • Basic situational awareness • Lightweight armor • Structure plus armor (A

  18. Lack of security of networked medical equipment in radiology.

    PubMed

    Moses, Vinu; Korah, Ipeson

    2015-02-01

    OBJECTIVE. There are few articles in the literature describing the security and safety aspects of networked medical equipment in radiology departments. Most radiologists are unaware of the security issues. We review the security of the networked medical equipment of a typical radiology department. MATERIALS AND METHODS. All networked medical equipment in a radiology department was scanned for vulnerabilities with a port scanner and a network vulnerability scanner, and the vulnerabilities were classified using the Common Vulnerability Scoring System. A network sniffer was used to capture and analyze traffic on the radiology network for exposure of confidential patient data. We reviewed the use of antivirus software and firewalls on the networked medical equipment. USB ports and CD and DVD drives in the networked medical equipment were tested to see whether they allowed unauthorized access. Implementation of the virtual private network (VPN) that vendors use to access the radiology network was reviewed. RESULTS. Most of the networked medical equipment in our radiology department used vulnerable software with open ports and services. Of the 144 items scanned, 64 (44%) had at least one critical vulnerability, and 119 (83%) had at least one high-risk vulnerability. Most equipment did not encrypt traffic and allowed capture of confidential patient data. Of the 144 items scanned, two (1%) used antivirus software and three (2%) had a firewall enabled. The USB ports were not secure on 49 of the 58 (84%) items with USB ports, and the CD or DVD drive was not secure on 17 of the 31 (55%) items with a CD or DVD drive. One of three vendors had an insecure implementation of VPN access. CONCLUSION. Radiologists and the medical industry need to urgently review and rectify the security issues in existing networked medical equipment. We hope that the results of our study and this article also raise awareness among radiologists about the security issues of networked medical equipment.

  19. 48 CFR 831.7001-3 - Books, supplies, and equipment required to be personally owned.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Books, supplies, and... PROCEDURES Contract Cost Principles and Procedures 831.7001-3 Books, supplies, and equipment required to be personally owned. (a) Reimbursement for supplies (including books, equipment, or other supplies) will be made...

  20. MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT. NATIONAL SANITATION FOUNDATION STANDARD NO. 18.

    ERIC Educational Resources Information Center

    National Sanitation Foundation, Ann Arbor, MI.

    THIS STANDARD COVERS THE SANITATION REQUIREMENTS FOR EQUIPMENT AND DEVICES WHICH DISPENSE FOOD OR BEVERAGE EITHER IN BULK OR PORTIONS. VENDING MACHINES OR BULK MILK DISPENSING EQUIPMENT ARE NOT COVERED IN THIS STANDARD. ITEMS COVERED INCLUDE THE BASIC PRINCIPLES OF DESIGN AND CONSTRUCTION, FOOD PROTECTION AND FREEDOM FROM HARBORAGES. MINIMUM…

  1. Principlism and communitarianism.

    PubMed

    Callahan, D

    2003-10-01

    The decline in the interest in ethical theory is first outlined, as a background to the author's discussion of principlism. The author's own stance, that of a communitarian philosopher, is then described, before the subject of principlism itself is addressed. Two problems stand in the way of the author's embracing principlism: its individualistic bias and its capacity to block substantive ethical inquiry. The more serious problem the author finds to be its blocking function. Discussing the four scenarios the author finds that the utility of principlism is shown in the two scenarios about Jehovah's Witnesses but that when it comes to selling kidneys for transplantation and germline enhancement, principlism is of little help.

  2. Driving Toward Guiding Principles

    PubMed Central

    Buckovich, Suzy A.; Rippen, Helga E.; Rozen, Michael J.

    1999-01-01

    As health care moves from paper to electronic data collection, providing easier access and dissemination of health information, the development of guiding privacy, confidentiality, and security principles is necessary to help balance the protection of patients' privacy interests against appropriate information access. A comparative review and analysis was done, based on a compilation of privacy, confidentiality, and security principles from many sources. Principles derived from ten identified sources were compared with each of the compiled principles to assess support level, uniformity, and inconsistencies. Of 28 compiled principles, 23 were supported by at least 50 percent of the sources. Technology could address at least 12 of the principles. Notable consistencies among the principles could provide a basis for consensus for further legislative and organizational work. It is imperative that all participants in our health care system work actively toward a viable resolution of this information privacy debate. PMID:10094065

  3. Ethical Issues within the Gerontological Nursing Curriculum.

    ERIC Educational Resources Information Center

    Bahr, Rose Therese

    This presentation focuses on ethical issues that need to be addressed within the gerontological nursing curriculum for preparing nurses to become change agents and catalysts in the health care of the older population. Ethics and ethical principles are defined, and three ethical principles are discussed: justice; beneficence; and autonomy.…

  4. Unit Record Equipment-Basic (Course Outline), Data Processing Technology: 8025.14.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    This outline provides a guide for the instructor of unit record equipment at the tenth, eleventh, and twelfth grade levels. The first week is spent reviewing punched card principles, and the remaining hours are devoted to learning the purpose, operation, and principles of control panel wiring for the interpreter, reproducing punch, accounting…

  5. Equipment for drilling miniature holes

    SciTech Connect

    Gillespie, L K

    1981-04-01

    Miniature holes are produced on 16 different types of mechanical drilling equipment. Each equipment type has significant advantages for a specific type of part. The basic capabilities vary greatly between equipment types. Some produce very precise holes and others produce very high volumes of commercial tolerance holes. At the present time machines are available for mechanicaly drilling up to 100,000 miniature holes per hour. Lasers currently are drilling as many as 15,000,000 ultra-miniature holes per hour.

  6. Vapourisers: Physical Principles and Classification

    PubMed Central

    Dhulkhed, Vithal; Shetti, Akshaya; Naik, Shraddha; Dhulkhed, Pavan

    2013-01-01

    Vapourisers have evolved from rudimentary inhalers to the microprocessor controlled, temperature compensated and flow sensing devices, which are universal today. The improvements in the design was influenced by the development of potent inhalational anaesthetics, unique properties of some agents, a deeper understanding of their mechanism of action, inherent flaws in the older vapourisers, mechanical problems due to thymol deposition, factors influencing their output such as temperature and pressure variations. It is important to review the principles governing the design of the vapouriser to gain insight into their working. It is fascinating to know how some of the older vapourisers, popularly used in the past, functioned. The descendant of Oxford Miniature Vapourizer, the Triservice vapouriser is still a part of the military anaesthesia draw over equipment meant for field use whereas the Copper Kettle the first precision device is the fore-runner of the Tec 6 and Aladdin cassette vapouriser. Anaesthesia trainees if exposed to draw over techniques get a deeper understanding of equipment and improved skills for disaster situations. In the recent advanced versions of the vapouriser a central processing unit in the anaesthetic machine controls the operation by continuously monitoring and adjusting fresh gas flow through the vapouriser to maintain desired concentration of the vapour. PMID:24249878

  7. Assessments of Longevity of Equipment Metal of Nuclear Power Plants equipped with Reactors VVER-1000

    SciTech Connect

    Gorbatykh, V.P.; Al Kassem, S.N.

    2004-07-01

    Characteristics of damage processes of metal of coffer-dams of steam generators collectors at nuclear power plants (NPPs) equipped with reactors VVER-1000 have been mentioned; principles of construction of longevity function has been cited and new approach has been shown while solving the problem of the longevity of the metal resource by substantiating the technological actions with new mode characteristics, performed with the help of specially developed equations and formulae, where practically all damage processes and all influencing factors can be accounted. (authors)

  8. Orbiter electrical equipment utilization baseline

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The baseline for utilization of Orbiter electrical equipment in both electrical and Environmental Control and Life Support System (ECLSS) thermal analyses is established. It is a composite catalog of Space Shuttle equipment, as defined in the Shuttle Operational Data Book. The major functions and expected usage of each component type are described. Functional descriptions are designed to provide a fundamental understanding of the Orbiter electrical equipment, to insure correlation of equipment usage within nominal analyses, and to aid analysts in the formulation of off-nominal, contingency analyses.

  9. Information technology equipment cooling system

    DOEpatents

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  10. Welding equipment for space applications

    NASA Astrophysics Data System (ADS)

    Dzhanibekov, V. A.; Zagrebel'Nyi, A. A.; Garvish, S. S.; Stesin, V. V.; Sheliagin, V. D.; Iurchenko, N. N.; Markov, A. V.

    A survey is presented of representative Soviet-period equipment for welding, brazing, coating, and cutting operations that are to be conducted in EVA and other microgravity/vacuum conditions by cosmonauts. Power-supply and process information-processing units are essential components of the 'Isparitel', 'Yantar', and hand-held 'Uri' equipment discussed; in addition, these welding equipment designs strove to achieve the greatest possible lightness, compactness, and energy efficiency. Accounts are given of cosmonaut EVA operational experience with the welding equipment presented.

  11. Management methodology for pressure equipment

    NASA Astrophysics Data System (ADS)

    Bletchly, P. J.

    Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

  12. Hydrogen and Fuel Cells for IT Equipment

    SciTech Connect

    Kurtz, Jennifer

    2016-03-09

    With the increased push for carbon-free and sustainable data centers, data center operators are increasingly looking to renewable energy as a means to approach carbon-free status and be more sustainable. The National Renewable Energy Laboratory (NREL) is a world leader in hydrogen research and already has an elaborate hydrogen infrastructure in place at the Golden, Colorado, state-of-the-art data center and facility. This presentation will discuss hydrogen generation, storage considerations, and safety issues as they relate to hydrogen delivery to fuel cells powering IT equipment.

  13. Ethical principles and guidelines for the development of cognitive systems.

    SciTech Connect

    Shaneyfelt, Wendy

    2006-05-01

    As cognitive systems technologies emerge, so too do the ethical issues surrounding their development and use. To develop cognitive systems technologies responsibly, Sandia National Laboratories is establishing a framework to proactively address both real and potential ethical issues. This report contains the principles and guidelines developers can use to guide them as they are confronted with ethical issues related to developing cognitive systems technologies as they apply to U.S. national security. A process to apply these principles offers a practical way to transfer these principles from paper to a working strategy. Case studies are presented to reflect upon potential scenarios and to consider resolution strategies.

  14. VIEW OF ULTRASONIC TESTING EQUIPMENT IN BUILDING 991. THIS EQUIPMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF ULTRA-SONIC TESTING EQUIPMENT IN BUILDING 991. THIS EQUIPMENT NON-DESTRUCTIVELY TESTS WEAPONS COMPONENTS FOR FLAWS AND CRACKS. (9/11/85) - Rocky Flats Plant, Final Assembly & Shipping, Eastern portion of plant site, south of Spruce Avenue, east of Tenth Street & north of Central Avenue, Golden, Jefferson County, CO

  15. 141. ARAIII Equipment location plan. Includes list of equipment and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    141. ARA-III Equipment location plan. Includes list of equipment and location in reactor, control, and other buildings. Aerojet-general 880-area/GCRE-101-U-1. Date: February 1958. Ineel index code no. 063-0101-65-013-192508. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  16. Workforce Issues.

    ERIC Educational Resources Information Center

    1996

    This document consists of four papers presented during a symposium on work force issues moderated by Jan DeJong at the 1996 conference of the Academy of Human Resource Development (AHRD). "Rethinking the Ties that Bind: An Exploratory Study of Employee Development in Utilities in Canada and the United States" (Michael Aherne, David…

  17. Newspaper Issue.

    ERIC Educational Resources Information Center

    Bourke, Thomas A.; And Others

    1986-01-01

    This special issue includes "The Microfilming of Newspapers: An Overview" (Thomas Bourke); "United States Newspaper Program: Progress and Propsects" (Larry Sullivan); "The Preservation of Canadian Newspapers" (Mary Jane Starr); "Current Filming of the New York Times at UMI" (Kenneth Tillman); and "The…

  18. Unaddressed Issues

    ERIC Educational Resources Information Center

    Rochester, J. Martin

    2005-01-01

    Walter Parker's January article, "Teaching Against Idiocy," raises important and fascinating issues relating to the proper role and function of the K-12 social studies classroom. Although J. Martin Rochester, the author of this article, agrees with his basic premise that schools obviously have an obligation to help promote citizenship education,…

  19. Unaddressed Issues

    ERIC Educational Resources Information Center

    Rochester, J. Martin

    2005-01-01

    Walter Parker's January article, "Teaching Against Idiocy," raises important and fascinating issues relating to the proper role and function of the K-12 social studies classroom. Although J. Martin Rochester, the author of this article, agrees with his basic premise that schools obviously have an obligation to help promote citizenship education,…

  20. Faculty Issues.

    ERIC Educational Resources Information Center

    Finkelstein, Martin

    Patterns that emerged from reviewing syllabi for courses on faculty issues are discussed, and four sample syllabi are presented. Few doctoral programs in higher education administration were identified that devote an entire course to the subject of American college and university faculty. For four courses that did devote an entire course to the…

  1. Missile Electronic Equipment Career Ladder, AFSC 411XOA (Formerly AFSC 316X2G).

    DTIC Science & Technology

    1986-03-01

    Plan of Instruction ........ ........ 31 Analysis of Equipment Used at the Technicai School....... 36 ELECTRONICS PRINCIPLES INVENTORY...two courses at Chanute AFB IL: Electronics Principles Course AQR31020-0O2, Blocks I through IX, followed by one of two separate airman basic resident...Blocks I through IV of Electronics Principles Course AQR31020- 002 before advancing to the ABR courses. Secondly, the former 316X2G ABR courses were

  2. Design Principles of the ESCOT Math Environments.

    ERIC Educational Resources Information Center

    Underwood, Jody S.; Hoadley, Chris; DiGiano, Chris; Stohl, Hollylynne; Hollebrands, Karen

    This paper describes the Educational Software Components of Tomorrow (ESCOT) project. The focus of the project was on principles that support problem-solving and learner-centered design issues, and the purpose was to garner lessons from a large educational software development project to share with the learning sciences and other interested…

  3. Instructional Software Design Principles.

    ERIC Educational Resources Information Center

    Hazen, Margret

    1985-01-01

    Discusses learner/computer interaction, learner control, sequencing of instructional events, and graphic screen design as effective principles for the design of instructional software, including tutorials. (MBR)

  4. Instructional Software Design Principles.

    ERIC Educational Resources Information Center

    Hazen, Margret

    1985-01-01

    Discusses learner/computer interaction, learner control, sequencing of instructional events, and graphic screen design as effective principles for the design of instructional software, including tutorials. (MBR)

  5. 40 CFR 63.1022 - Equipment identification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Equipment identification. 63.1022... identification. (a) General equipment identification. Equipment subject to this subpart shall be identified. Identification of the equipment does not require physical tagging of the equipment. For example, the equipment...

  6. Positive materials identification of existing equipment

    SciTech Connect

    Wolf, H.A.

    1996-07-01

    Considerable engineering effort and expertise are expended for materials selection at refining and petrochemical facilities. However, the benefits of this effort are undermined if there is an inadvertent material substitution during construction. Although procedures have always been in place to reduce the chance of such substitutions, it is known that these errors have occurred. Accordingly, over the years the industry has periodically reviewed and improved quality control in this effort. However, many older facilities that did not benefit from today`s procedures are still in operation. As a consequence, some companies have conducted positive material identification (PMI) verification of existing equipment. This process is further complicated by the fact that the most susceptible components are typically insulated and must be located. Once located, accessibility and operating temperatures are complicating issues. This paper describes prioritization issues and hardware tradeoffs for conducting a PMI verification program.

  7. Food Service Equipment and Appurtenances.

    ERIC Educational Resources Information Center

    National Sanitation Foundation, Ann Arbor, MI.

    Equipment design specifications are presented relating to tables of all kinds, counters, sinks and drainboards, bins, shelves, drawers, hoods and similar kitchen appurtenances, not including baking, roasting, toasting, broiling or frying equipment, food preparation machinery such as slicers, choppers, and cutters, mixers and grinders, steam…

  8. Laser Equipment Enhanced My Program.

    ERIC Educational Resources Information Center

    Browning, Terry

    1986-01-01

    The author taught the first auto body repair course in the country that employed laser-accurate equipment. He states that having this equipment raised the placement rate of his graduates, made the learning environment more positive, and improved students' understanding of math and science. (CH)

  9. Heavy Equipment Mechanic. Instructor Edition.

    ERIC Educational Resources Information Center

    Hendrix, Laborn J.; And Others

    This manual is intended to assist heavy equipment instructors in teaching the latest concepts and functions of heavy equipment. It includes 7 sections and 27 instructional units. Sections (and units) are: orientation (shop safety and first aid, hand tools and miscellaneous tools, measuring, basic rigging and hoisting), engines (basic engine…

  10. Food Service Equipment. Third Edition.

    ERIC Educational Resources Information Center

    Jernigan, Anna Katherine; Ross, Lynne Nannen

    This book provides information that will help in purchasing the kind of food service equipment most useful in any given facility. Hence, it should be of value to architects, contractors, administrators, dietitians, managers, and others involved in remodeling a facility, replacing equipment, and/or improving the efficiency of food service…

  11. Heavy Equipment Mechanic. Instructor Edition.

    ERIC Educational Resources Information Center

    Hendrix, Laborn J.; And Others

    This manual is intended to assist heavy equipment instructors in teaching the latest concepts and functions of heavy equipment. It includes 7 sections and 27 instructional units. Sections (and units) are: orientation (shop safety and first aid, hand tools and miscellaneous tools, measuring, basic rigging and hoisting), engines (basic engine…

  12. Available Equipment in School Foodservice.

    ERIC Educational Resources Information Center

    Meyer, Mary Kay

    This report provides data on the National Food Service Management Institute's multi-year research project that identified type, style, age, and condition of available food service equipment in K-12 schools nationwide. The study found that smaller schools, serving less than 400 lunches per day, had kitchens equipped with ranges, small…

  13. Heavy Equipment Mechanic Program Guide.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    Designed to train an entry-level mechanic, this heavy equipment mechanic program guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a heavy equipment mechanic program. The general information section contains the following: purpose and objectives; program description,…

  14. Buyer's Guide to Playground Equipment.

    ERIC Educational Resources Information Center

    Child Care Information Exchange, 1996

    1996-01-01

    Guides child care centers when investing in outdoor play structures and playground equipment with advice provided by manufacturers and dealers. Details six factors to consider, including appropriateness, construction, installation, safety, support, and experience. Contains a playground equipment manufacturers and dealers directory that includes…

  15. Tips for Buying Exercise Equipment

    MedlinePlus

    ... Vea esta página en español Tips for Buying Exercise Equipment Related Items Weight Loss Challenge Free Trials ... altered photo? What to Do Before You Buy Exercise Equipment You’ve done your job and looked ...

  16. Instrumentation: endoscopes and equipment.

    PubMed

    Gaab, Michael R

    2013-02-01

    The technology and instrumentation for neuroendoscopy are described: endoscopes (principles, designs, applications), light sources, instruments, accessories, holders, and navigation. Procedures for cleaning, sterilizing, and storing are included. The description is based on the author's own technical development and neuroendoscopic experience, published technology and devices, and publications on endoscopic surgery. The main work horses in neuroendoscopy are rigid glass rod endoscopes (Hopkins optics) due to the optical quality, which allows full high-definition video imaging, different angles of view, and autoclavability, which is especially important in neuroendoscopy due to the risk of Creutzfeldt-Jakob disease infection. Applications are endoscopy assistance to microsurgery, stand-alone endoscopy controlled approaches such as transnasal skull base, ventriculoscopy, and cystoscopy in the cranium. Rigid glass rod optics are also applicable in spinal endoscopy and peripheral nerve decompression using special tubes and cannulas. Rigid minifiberoptics with less resolution may be used in less complex procedures (ventriculoscopy, cystoscopy, endoscopy assistance with pen-designs) and have the advantages of smaller diameters and disposable designs. Flexible fiberoptics are usually used in combination with rigid scopes and can be steered, e.g. through the ventricles, in spinal procedures for indications including syringomyelia and multicystic hydrocephalus. Upcoming flexible chip endoscopes ("chip-in-the-tip") may replace flexible fiberoptics in the future, offering higher resolution and cold LED-illumination, and may provide for stereoscopic neuroendoscopy. Various instruments (mechanical, coagulation, laser guides, ultrasonic aspirators) and holders are available. Certified methods for cleaning and sterilization, with special requirements in neuroapplications, are important. Neuroendoscopic instrumentation is now an established technique in neurosurgical practice and

  17. Information technology equipment cooling method

    DOEpatents

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  18. Aeration equipment for small depths

    NASA Astrophysics Data System (ADS)

    Sluše, Jan; Pochylý, František

    2015-05-01

    Deficit of air in water causes complications with cyanobacteria mainly in the summer months. Cyanobacteria is a bacteria that produces poison called cyanotoxin. When the concentration of cyanobacteria increases, the phenomena "algal bloom" appears, which is very toxic and may kill all the organisms. This article describes new equipment for aeration of water in dams, ponds and reservoirs with small depth. This equipment is mobile and it is able to work without any human factor because its control is provided by a GPS module. The main part of this equipment consists of a floating pump which pumps water from the surface. Another important part of this equipment is an aerator where water and air are blended. Final aeration process runs in the nozzles which provide movement of all this equipment and aeration of the water. Simulations of the flow are solved by multiphase flow with diffusion in open source program called OpenFOAM. Results will be verified by an experiment.

  19. Environmental Issues are Controversial Issues.

    ERIC Educational Resources Information Center

    Hepburn, Mary Allaire

    The extensive social-scientific interest and continuing relevance of environmental study assure its immediate and long-range importance in the social studies. But the crisis atmosphere surrounding this issue threatens a thoughtful, systematic approach to the subject, and poses the danger of a careless rush to activity. As social studies educators,…

  20. Theoretical Issues

    SciTech Connect

    Marc Vanderhaeghen

    2007-04-01

    The theoretical issues in the interpretation of the precision measurements of the nucleon-to-Delta transition by means of electromagnetic probes are highlighted. The results of these measurements are confronted with the state-of-the-art calculations based on chiral effective-field theories (EFT), lattice QCD, large-Nc relations, perturbative QCD, and QCD-inspired models. The link of the nucleon-to-Delta form factors to generalized parton distributions (GPDs) is also discussed.

  1. Hamilton's Principle for Beginners

    ERIC Educational Resources Information Center

    Brun, J. L.

    2007-01-01

    I find that students have difficulty with Hamilton's principle, at least the first time they come into contact with it, and therefore it is worth designing some examples to help students grasp its complex meaning. This paper supplies the simplest example to consolidate the learning of the quoted principle: that of a free particle moving along a…

  2. Assessment Principles and Tools

    PubMed Central

    Golnik, Karl C.

    2014-01-01

    The goal of ophthalmology residency training is to produce competent ophthalmologists. Competence can only be determined by appropriately assessing resident performance. There are accepted guiding principles that should be applied to competence assessment methods. These principles are enumerated herein and ophthalmology-specific assessment tools that are available are described. PMID:24791100

  3. Principlism and communitarianism

    PubMed Central

    Callahan, D

    2003-01-01

    The decline in the interest in ethical theory is first outlined, as a background to the author's discussion of principlism. The author's own stance, that of a communitarian philosopher, is then described, before the subject of principlism itself is addressed. Two problems stand in the way of the author's embracing principlism: its individualistic bias and its capacity to block substantive ethical inquiry. The more serious problem the author finds to be its blocking function. Discussing the four scenarios the author finds that the utility of principlism is shown in the two scenarios about Jehovah's Witnesses but that when it comes to selling kidneys for transplantation and germline enhancement, principlism is of little help. PMID:14519838

  4. Dynamic sealing principles

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1976-01-01

    The fundamental principles governing dynamic sealing operation are discussed. Different seals are described in terms of these principles. Despite the large variety of detailed construction, there appear to be some basic principles, or combinations of basic principles, by which all seals function, these are presented and discussed. Theoretical and practical considerations in the application of these principles are discussed. Advantages, disadvantages, limitations, and application examples of various conventional and special seals are presented. Fundamental equations governing liquid and gas flows in thin film seals, which enable leakage calculations to be made, are also presented. Concept of flow functions, application of Reynolds lubrication equation, and nonlubrication equation flow, friction and wear; and seal lubrication regimes are explained.

  5. Demand for red meats: principles, research evidence, and issues.

    PubMed

    Purcell, Wayne D; Lusk, Jayson

    2003-07-01

    Demand is not measured by per capita consumption. Demand is a schedule of the quantities consumers will take at alternative prices. The level of demand and demand changes over time are tied to consumer incomes, prices of substitutes, and consumer tastes and preferences. Critical to increasing meat demand is a greater understanding of consumer preferences for new meat products. Developing branded products such as "natural" or "guaranteed-tender" beef may not be the answer for all cattle producers, but research suggests that there are segments of the population willing to pay premiums for such products. Differentiating meat products through technology and branding provides a means of better meeting consumers' desires and increasing overall demand for meat and livestock.

  6. Teaching Ecological Principles as a Basis for Understanding Environmental Issues.

    ERIC Educational Resources Information Center

    Webb, Paul; Boltt, Gill

    1989-01-01

    Using case study data, determines high school pupils' and university students' (n=162) ability to predict possible outcomes of interactions between ecological populations . Results indicate the majority of respondents could predict interactive outcomes within a simple food web but not when the interaction involved multiple routes. (five…

  7. Key Principles for ESEA Reauthorization. Issue Brief No. 1

    ERIC Educational Resources Information Center

    National Coalition on School Diversity (NJ1), 2012

    2012-01-01

    Today, public schoolchildren are more racially isolated than at any time in the past four decades. And, racially isolated schools are overwhelmingly high-poverty schools: indeed nine out of ten of highly segregated schools serving African-American and Latino students are schools of concentrated poverty. With rare exception, racially isolated,…

  8. Water Balance Covers For Waste Containment: Principles and Practice

    EPA Science Inventory

    Water Balance Covers for Waste Containment: Principles and Practices introduces water balance covers and compares them with conventional approaches to waste containment. The authors provided detailed analysis of the fundamentals of soil physics and design issues, introduce appl...

  9. Water Balance Covers For Waste Containment: Principles and Practice

    EPA Science Inventory

    Water Balance Covers for Waste Containment: Principles and Practices introduces water balance covers and compares them with conventional approaches to waste containment. The authors provided detailed analysis of the fundamentals of soil physics and design issues, introduce appl...

  10. Scottish Schools Science Equipment Research Centre Bulletin No. 55.

    ERIC Educational Resources Information Center

    1972

    Instructions for the construction of the following apparatus for the secondary school science laboratory are included in this issue of the Scottish Schools Science Equipment Research Centre Bulletin: a cheap water purifier using an expendable deionizer can; a simple amplifier suitable for detecting or displaying D. C. currents of 1 microamp or…

  11. 40 CFR 63.771 - Control equipment requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... flame zone of the boiler or process heater. (ii) A vapor recovery device (e.g., carbon adsorption system... in a thermal treatment unit for which the owner or operator has been issued a final permit under 40... reactivated in a thermal treatment unit equipped with and operating air emission controls in accordance...

  12. 40 CFR 63.771 - Control equipment requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... flame zone of the boiler or process heater. (ii) A vapor recovery device (e.g., carbon adsorption system... in a thermal treatment unit for which the owner or operator has been issued a final permit under 40... reactivated in a thermal treatment unit equipped with and operating air emission controls in accordance...

  13. Should Educators Generate Specifications for the Purchase of Equipment?

    ERIC Educational Resources Information Center

    Bright, R. Louis

    Many educators believe that they should be able to decide what they need and issue functional specifications for the equipment they want to purchase. In order to maximize the cost effectiveness of a given technology, it may be better to have a constant interplay between people familiar with educational problems, educational research, hardware…

  14. Resources for managing the use of patient-supplied equipment.

    PubMed

    2007-09-01

    Deciding whether patients should be allowed to bring equipment with them into the hospital--and what level of oversight is required--can be a challenge. This Guidance Article, which expands on concepts that we discussed in our May 2007 issue, presents tools that hospitals can use to develop and implement practical policies.

  15. Equipped for the Future: A Collaborative Journey toward System Reform.

    ERIC Educational Resources Information Center

    NIFL News, 1997

    1997-01-01

    This issue of the National Institute for Literacy (NIFL) News is devoted to "Equipped for the Future" (EFF), the organization's long-term collaborative initiative for system reform. The newsletter contains the testimony of people who have been involved in the process over the past 2 years, speaking of the promise they see in EFF. The…

  16. Scottish Schools Science Equipment Research Centre Bulletin No. 55.

    ERIC Educational Resources Information Center

    1972

    Instructions for the construction of the following apparatus for the secondary school science laboratory are included in this issue of the Scottish Schools Science Equipment Research Centre Bulletin: a cheap water purifier using an expendable deionizer can; a simple amplifier suitable for detecting or displaying D. C. currents of 1 microamp or…

  17. Guidelines for Electromagnetic Interference Testing of Power Plant Equipment: Revision 3 to TR-102323

    SciTech Connect

    J. Cunningham and J. Shank

    2004-11-01

    To continue meeting safety and reliability requirements while controlling costs, operators of nuclear power plants must be able to replace and upgrade equipment in a cost-effective manner. One issue that has been problematic for new plant equipment and especially for digital instrumentation and control (I&C) systems in recent years is electromagnetic compatibility (EMC). The EMC issue usually involves testing to show that critical equipment will not be adversely affected by electromagnetic interference (EMI) in the plant environment. This guide will help nuclear plant engineers address EMC issues and qualification testing in a consistent, comprehensive manner.

  18. Ethical Principles of Psychologists and Code of Conduct.

    ERIC Educational Resources Information Center

    American Psychologist, 2002

    2002-01-01

    Describes the American Psychological Association's Ethical Principles of Psychologists and Code of Conduct, focusing on introduction and applicability; preamble; general principles; and ethical standards (resolving ethical issues, competence, human relations, privacy and confidentiality, advertising and other public statements, record keeping and…

  19. Science 101: What, Exactly, Is the Heisenberg Uncertainty Principle?

    ERIC Educational Resources Information Center

    Robertson, Bill

    2016-01-01

    Bill Robertson is the author of the NSTA Press book series, "Stop Faking It! Finally Understanding Science So You Can Teach It." In this month's issue, Robertson describes and explains the Heisenberg Uncertainty Principle. The Heisenberg Uncertainty Principle was discussed on "The Big Bang Theory," the lead character in…

  20. Science 101: What, Exactly, Is the Heisenberg Uncertainty Principle?

    ERIC Educational Resources Information Center

    Robertson, Bill

    2016-01-01

    Bill Robertson is the author of the NSTA Press book series, "Stop Faking It! Finally Understanding Science So You Can Teach It." In this month's issue, Robertson describes and explains the Heisenberg Uncertainty Principle. The Heisenberg Uncertainty Principle was discussed on "The Big Bang Theory," the lead character in…

  1. Ethical Principles of Psychologists and Code of Conduct.

    ERIC Educational Resources Information Center

    American Psychologist, 2002

    2002-01-01

    Describes the American Psychological Association's Ethical Principles of Psychologists and Code of Conduct, focusing on introduction and applicability; preamble; general principles; and ethical standards (resolving ethical issues, competence, human relations, privacy and confidentiality, advertising and other public statements, record keeping and…

  2. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    SciTech Connect

    NA

    1997-09-29

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive.

  3. [Software and hardware for computer equipment designed for psychophysiological examination].

    PubMed

    Matveev, E V; Gal'etov, I V; Vasil'ev, A A; Kravchuk, A Iu; Tereshkina, D V

    2005-01-01

    Principles of designing software and hardware for new computer equipment for psychophysiological examination were elaborated on the basis of theoretical prerequisites and of analysis of the use of equipment manufactured serially for quantitation of indices of the human higher nervous activity (HNA). The hierarchic structuring of software and hardware enabled, through unification of solutions, the development of new modifications of two equipment sets: computer-based unit "Psihomat" KPFK-99 for psychophysiological examination and computer-based unit "STABILOTEST" ST-01 for the evaluation of the central nervous system by the stability parameters in maintaining the vertical posture. The units have new improved functional features and provide the users with new computer technologies for dealing with research and practical tasks related with examination of human HNA parameters in health and pathology.

  4. Fire-resistant wellhead equipment for offshore platforms

    SciTech Connect

    Williams, M.R.; Keene, K.

    1984-02-01

    A new generation of fire-resistant wellhead equipment has been developed for offshore platforms. This paper presents the design concepts and principles of operation of this new equipment, and it describes the engineering approach taken during its development. These new wellheads and christmas trees have survived numerous laboratory fire tests which simulated offshore platform fire conditions. No leakage was permissible during the test burns nor during the subsequent cooldown periods. The laboratory fire test results confirmed the performance predicted by computer Finite Element Analysis and verified the design procedures employed. This new fire resistant wellhead equipment promises to significantly reduce the fire hazard associated with the production of oil and gas from offshore platform wells.

  5. [Bioethics of principles].

    PubMed

    Pérez-Soba Díez del Corral, Juan José

    2008-01-01

    Bioethics emerges about the tecnological problems of acting in human life. Emerges also the problem of the moral limits determination, because they seem exterior of this practice. The Bioethics of Principles, take his rationality of the teleological thinking, and the autonomism. These divergence manifest the epistemological fragility and the great difficulty of hmoralñ thinking. This is evident in the determination of autonomy's principle, it has not the ethical content of Kant's propose. We need a new ethic rationality with a new refelxion of new Principles whose emerges of the basic ethic experiences.

  6. Heavy Equipment Mechanic Program Standards.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the heavy equipment mechanic program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning);…

  7. MICHELLE TILLOTSON WITH TEST EQUIPMENT

    NASA Image and Video Library

    2016-01-20

    MICHELLE TILLOTSON, AN ENGINEER AT NASA’S MARSHALL SPACE FLIGHT CENTER, SHOWS KALYN HOPKINS A STUDENT AT THE MIAMI VALLEY SCHOOL, DAYTON OHIO, NEW EQUIPMENT THAT WILL BE USED TO TEST THE PROPELLANT TANKS FOR THE SLS

  8. Water-Using Equipment: Domestic

    SciTech Connect

    Solana, Amy E.; Mcmordie, Katherine

    2006-01-24

    Water management is an important aspect of energy engineering. This article addresses water-using equipment primarily used for household purposes, including faucets, showers, toilets, urinals, dishwashers, and clothes washers, and focuses on how the equipment can be optimized to save both water and energy. Technology retrofits and operation and maintenance changes are the primary methods discussed for water and energy conservation. Auditing to determine current consumption rates is also described for each technology.

  9. Postoutbreak disinfection of mobile equipment.

    PubMed

    Alphin, R L; Ciaverelli, C D; Hougentogler, D P; Johnson, K J; Rankin, M K; Benson, E R

    2010-03-01

    Current control strategies for avian influenza virus, exotic Newcastle disease, and other highly contagious poultry diseases include surveillance, quarantine, depopulation, disposal, and decontamination. Skid steer loaders and other mobile equipment are extensively used during depopulation and disposal. Movement of contaminated equipment has been implicated in the spread of disease in previous outbreaks. One approach to equipment decontamination is to power wash the equipment, treat with a liquid disinfectant, change any removable filters, and let it sit idle for several days. In this project, multiple disinfectant strategies were individually evaluated for their effectiveness at inactivating Newcastle disease virus (NDV) on mechanical equipment seeded with the virus. A small gasoline engine was used to simulate typical mechanical equipment. A high titer of LaSota strain, NDV was applied and dried onto a series of metal coupons. The coupons were then placed on both interior and exterior surfaces of the engine. Liquid disinfectants that had been effective in the laboratory were not as effective at disinfecting the engine under field conditions. Indirect thermal fog showed a decrease in overall virus titer or strength. Direct thermal fog was more effective than liquid spray application or indirect thermal fog application.

  10. 14 CFR 121.345 - Radio equipment.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Radio equipment. 121.345 Section 121.345..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.345 Radio equipment. (a) No person may operate an airplane unless it is equipped with radio equipment required for the kind of...

  11. 14 CFR 121.345 - Radio equipment.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Radio equipment. 121.345 Section 121.345..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.345 Radio equipment. (a) No person may operate an airplane unless it is equipped with radio equipment required for the kind of...

  12. 14 CFR 121.345 - Radio equipment.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Radio equipment. 121.345 Section 121.345..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.345 Radio equipment. (a) No person may operate an airplane unless it is equipped with radio equipment required for the kind of...

  13. 14 CFR 121.345 - Radio equipment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Radio equipment. 121.345 Section 121.345..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.345 Radio equipment. (a) No person may operate an airplane unless it is equipped with radio equipment required for the kind of...

  14. 14 CFR 121.345 - Radio equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Radio equipment. 121.345 Section 121.345..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.345 Radio equipment. (a) No person may operate an airplane unless it is equipped with radio equipment required for the kind of...

  15. 40 CFR 63.1003 - Equipment identification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Equipment identification. 63.1003...) National Emission Standards for Equipment Leaks-Control Level 1 § 63.1003 Equipment identification. (a) General equipment identification. Equipment subject to this subpart shall be identified. Identification of...

  16. 1968 Listing of Swimming Pool Equipment.

    ERIC Educational Resources Information Center

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    An up-to-date listing of swimming pool equipment including--(1) companies authorized to display the National Sanitation Foundation seal of approval, (2) equipment listed as meeting NSF swimming pool equipment standards relating to diatomite type filters, (3) equipment listed as meeting NSF swimming pool equipment standard relating to sand type…

  17. Equipment Efficiency for Healthy School Meals. [Videotape].

    ERIC Educational Resources Information Center

    National Food Service Management Inst., University, MS.

    A satellite seminar on large-scale food production equipment discusses ways child nutrition personnel can maximize use of existing equipment, considers research related to use of existing equipment, explains plan reviews for equipment selection and purchase, and explores new equipment options. Examples illustrate use of planning or modernizing…

  18. 1968 Listing of Swimming Pool Equipment.

    ERIC Educational Resources Information Center

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    An up-to-date listing of swimming pool equipment including--(1) companies authorized to display the National Sanitation Foundation seal of approval, (2) equipment listed as meeting NSF swimming pool equipment standards relating to diatomite type filters, (3) equipment listed as meeting NSF swimming pool equipment standard relating to sand type…

  19. Equipment Efficiency for Healthy School Meals. [Videotape].

    ERIC Educational Resources Information Center

    National Food Service Management Inst., University, MS.

    A satellite seminar on large-scale food production equipment discusses ways child nutrition personnel can maximize use of existing equipment, considers research related to use of existing equipment, explains plan reviews for equipment selection and purchase, and explores new equipment options. Examples illustrate use of planning or modernizing…

  20. Pipeline issues

    NASA Technical Reports Server (NTRS)

    Eisley, Joe T.

    1990-01-01

    The declining pool of graduates, the lack of rigorous preparation in science and mathematics, and the declining interest in science and engineering careers at the precollege level promises a shortage of technically educated personnel at the college level for industry, government, and the universities in the next several decades. The educational process, which starts out with a large number of students at the elementary level, but with an ever smaller number preparing for science and engineering at each more advanced educational level, is in a state of crisis. These pipeline issues, so called because the educational process is likened to a series of ever smaller constrictions in a pipe, were examined in a workshop at the Space Grant Conference and a summary of the presentations and the results of the discussion, and the conclusions of the workshop participants are reported.

  1. Chemical Principles Exemplified

    ERIC Educational Resources Information Center

    Plumb, Robert C.

    1972-01-01

    Collection of two short descriptions of chemical principles seen in life situations: the autocatalytic reaction seen in the bombardier beetle, and molecular potential energy used for quick roasting of beef. Brief reference is also made to methanol lighters. (PS)

  2. Archimedes' Principle in Action

    ERIC Educational Resources Information Center

    Kires, Marian

    2007-01-01

    The conceptual understanding of Archimedes' principle can be verified in experimental procedures which determine mass and density using a floating object. This is demonstrated by simple experiments using graduated beakers. (Contains 5 figures.)

  3. Archimedes' Principle in Action

    ERIC Educational Resources Information Center

    Kires, Marian

    2007-01-01

    The conceptual understanding of Archimedes' principle can be verified in experimental procedures which determine mass and density using a floating object. This is demonstrated by simple experiments using graduated beakers. (Contains 5 figures.)

  4. Archimedes' principle in action

    NASA Astrophysics Data System (ADS)

    Kireš, Marián

    2007-09-01

    The conceptual understanding of Archimedes' principle can be verified in experimental procedures which determine mass and density using a floating object. This is demonstrated by simple experiments using graduated beakers.

  5. Chemical Principles Exemplified

    ERIC Educational Resources Information Center

    Plumb, Robert C.

    1972-01-01

    Collection of two short descriptions of chemical principles seen in life situations: the autocatalytic reaction seen in the bombardier beetle, and molecular potential energy used for quick roasting of beef. Brief reference is also made to methanol lighters. (PS)

  6. [DEONTOLOGICAL ISSUES IN RAILWAY HYGIENE].

    PubMed

    Kaptsov, V A

    2015-01-01

    There are presented the main ethical and deontological problems encountered in practice and research activities of the hygienist in transport. There is shown the importance of strict compliance with hygienic standards, disregard for the principle of "technical attainability", the necessity of continuous training, improvement of skills of sanitary-educational activity and readiness to solve emerging ethical issues in connection with the development of scientific and technical progress.

  7. The precautionary principle.

    PubMed

    Hayes, A Wallace

    2005-06-01

    The Precautionary Principle in its simplest form states: "When an activity raises threats of harm to human health or the environment, precautionary measures should be taken even if some cause-and-effect relationships are not fully established scientifically". This Principle is the basis for European environmental law, and plays an increasing role in developing environmental health policies as well. It also is used in environmental decision-making in Canada and in several European countries, especially in Denmark, Sweden, and Germany. The Precautionary Principle has been used in the environmental decision-making process and in regulating drugs and other consumer products in the United States. The Precautionary Principle enhances the collection of risk information for, among other items, high production volume chemicals and risk-based analyses in general. It does not eliminate the need for good science or for science-based risk assessments. Public participation is encouraged in both the review process and the decision-making process. The Precautionary Principle encourages, and in some cases may require, transparency of the risk assessment process on health risk of chemicals both for public health and the environment. A debate continues on whether the Principle should embrace the "polluter pays" directive and place the responsibility for providing risk assessment on industry. The best elements of a precautionary approach demand good science and challenge the scientific community to improve methods used for risk assessment.

  8. [Biomechanics study during march with different military equipment of equal carrying load].

    PubMed

    Lang, Y Y

    1992-03-01

    The purpose of the study is to select the best military equipment of equal carrying load by the index of biomechanics. Six healthy young men whose age varied between 19 and 25 years were volunteered, in the experiment. They were required to march 1.5 h, carried with different military equipment of equal weight, 25 kg, at a speed of 5 km/h. The centre of gravity of the body and its kinesic parameters were measured before and after the march. The frequency and length of pace were measured during the march. The results of the study indicated that the displacement of the body's centre of gravity carrying equipment I was the most evident, whereas the least displacement of centre of gravity of the body was that carrying equipment II. The frequency of pace during the march was reduced in all three carrying different kinds of equipment, the most evident being that carrying equipment I; the length of pace became bigger with those carrying equipment II and III; the speed of pace was decelerated using equipment I, but it was quickened with equipment II. The change of kinesic parameters have no significant difference among the three. In summary; equipment II conforms best to biomechanical principles, whereas equipment I is the worst.

  9. NASA ground terminal communication equipment automated fault isolation expert systems

    NASA Technical Reports Server (NTRS)

    Tang, Y. K.; Wetzel, C. R.

    1990-01-01

    The prototype expert systems are described that diagnose the Distribution and Switching System I and II (DSS1 and DSS2), Statistical Multiplexers (SM), and Multiplexer and Demultiplexer systems (MDM) at the NASA Ground Terminal (NGT). A system level fault isolation expert system monitors the activities of a selected data stream, verifies that the fault exists in the NGT and identifies the faulty equipment. Equipment level fault isolation expert systems are invoked to isolate the fault to a Line Replaceable Unit (LRU) level. Input and sometimes output data stream activities for the equipment are available. The system level fault isolation expert system compares the equipment input and output status for a data stream and performs loopback tests (if necessary) to isolate the faulty equipment. The equipment level fault isolation system utilizes the process of elimination and/or the maintenance personnel's fault isolation experience stored in its knowledge base. The DSS1, DSS2 and SM fault isolation systems, using the knowledge of the current equipment configuration and the equipment circuitry issues a set of test connections according to the predefined rules. The faulty component or board can be identified by the expert system by analyzing the test results. The MDM fault isolation system correlates the failure symptoms with the faulty component based on maintenance personnel experience. The faulty component can be determined by knowing the failure symptoms. The DSS1, DSS2, SM, and MDM equipment simulators are implemented in PASCAL. The DSS1 fault isolation expert system was converted to C language from VP-Expert and integrated into the NGT automation software for offline switch diagnoses. Potentially, the NGT fault isolation algorithms can be used for the DSS1, SM, amd MDM located at Goddard Space Flight Center (GSFC).

  10. Environmental issues in China

    SciTech Connect

    Travis, P.S.

    1991-10-01

    Global concern about the environment is increasing, and the People's Republic of China (PRC) is not immune from such concerns. The Chinese face issues similar to those of many other developing nations. The US Department of Energy is particularly interested in national and world pollution issues, especially those that may infringe on other countries' economic growth and development. The DOE is also interested in any opportunities that might exist for US technical assistance and equipment in combating environmental problems. Our studies of articles in the China Daily, and English-language daily newspaper published by the Chinese government, show that population, pollution, and energy are major concerns of the Chinese Communist Party. Thus this report emphasizes the official Chinese government view. Supporting data were also obtained from other sources. Regardless of the severity of their various environmental problems, the Chinese will only try to remedy those problems with the greatest negative effects on its developing economy. They will be looking for foreign assistance, financial and informational, to help implement solutions. With the Chinese government seeking assistance, the United States has an opportunity to export basic technical information, especially in the areas of pollution control and monitoring, oil exploration methods, oil drilling technology, water and sewage treatment procedures, hazardous waste and nuclear waste handling techniques, and nuclear power plant safety procedures. In those areas the US has expertise and extensive technical experience, and by exporting the technologies the US would benefit both economically and politically. 59 refs., 3 figs.

  11. Maintainability design of underground mining equipment. Volume 2. Maintainability design guidelines. Research report (Final)

    SciTech Connect

    Conway, E.J.; Unger, R.

    1989-09-01

    The objectives of the project were to: (1) determine the extent to which maintainability design concepts and principles have been applied to the design of underground coal mining equipment, (2) try to assess its impact on productivity and personnel safety, and (3) develop maintainability guidelines to enhance the design of new or rebuilt equipment. An equipment design review was completed at ten operational coal mines. The purpose was to identify design approaches and features that enhanced and degraded the maintenance process. Mine management, safety, and maintenance personnel were also interviewed to identify machine specific design problems. Six original equipment manufacturers were visited and the procedures used to enhance the maintainability of their equipment discussed. Volume I of the Final Technical Report presents an overview of procedures and protocol used and a summary of the findings. Volume II includes the maintainability design guide for mobile underground mining equipment.

  12. Maintainability design of underground-mining equipment. Volume 1. Final technical report. Research report (Final)

    SciTech Connect

    Conway, E.J.; Unger, R.

    1988-09-01

    The objectives of the project were to: (1) determine the extent to which maintainability design concepts and principles have been applied to the design of underground coal mining equipment, (2) try to assess its impact on productivity and personnel safety, and (3) develop maintainability guidelines to enhance the design of new or rebuilt equipment. An equipment design review was completed at ten operational coal mines. The purpose was to identify design approaches and features that enhanced and degraded the maintenance process. Mine management, safety, and maintenance personnel were also interviewed to identify machine specific design problems. Six original equipment manufacturers were visited and the procedures used to enhance the maintainability of their equipment discussed. Volume I of the Final Technical Report presents an overview of procedures and protocol used and a summary of the findings. Volume II includes the maintainability design guide for mobile underground mining equipment.

  13. [Technical consideration of setting up a specification for human centrifuge evaluation of anti-G equipment].

    PubMed

    Zhang, C L; Geng, X C; Zhang, W X; Yan, G D; Chu, X

    1999-12-01

    Anti-G equipment needs to be evaluated using human centrifuge before further developed. However, there isn't a general specification for human centrifuge evaluation of anti-G equipment. From related literature and from our over thirty years experience in this area, we sum up to five aspect technical consideration below: human centrifuge, medical specification for using human in +Gz stress experiment, anti-G equipment experimental assembly, principle should be abided by during human centrifuge evaluation of anti-G equipment. We hope that the technical considerations mentioned in the paper should be helpful to the work of setting up a specification for human centrifuge evaluation anti-G equipment. After we have a specification, the research will be conducted orderly and the anti-G [correction of an-G] equipment will be developed sequentially.

  14. Medicare Program; End-Stage Renal Disease Prospective Payment System, Coverage and Payment for Renal Dialysis Services Furnished to Individuals With Acute Kidney Injury, End-Stage Renal Disease Quality Incentive Program, Durable Medical Equipment, Prosthetics, Orthotics and Supplies Competitive Bidding Program Bid Surety Bonds, State Licensure and Appeals Process for Breach of Contract Actions, Durable Medical Equipment, Prosthetics, Orthotics and Supplies Competitive Bidding Program and Fee Schedule Adjustments, Access to Care Issues for Durable Medical Equipment; and the Comprehensive End-Stage Renal Disease Care Model. Final rule.

    PubMed

    2016-11-04

    This rule updates and makes revisions to the End-Stage Renal Disease (ESRD) Prospective Payment System (PPS) for calendar year 2017. It also finalizes policies for coverage and payment for renal dialysis services furnished by an ESRD facility to individuals with acute kidney injury. This rule also sets forth requirements for the ESRD Quality Incentive Program, including the inclusion of new quality measures beginning with payment year (PY) 2020 and provides updates to programmatic policies for the PY 2018 and PY 2019 ESRD QIP. This rule also implements statutory requirements for bid surety bonds and state licensure for the Durable Medical Equipment, Prosthetics, Orthotics, and Supplies (DMEPOS) Competitive Bidding Program (CBP). This rule also expands suppliers' appeal rights in the event of a breach of contract action taken by CMS, by revising the appeals regulation to extend the appeals process to all types of actions taken by CMS for a supplier's breach of contract, rather than limit an appeal for the termination of a competitive bidding contract. The rule also finalizes changes to the methodologies for adjusting fee schedule amounts for DMEPOS using information from CBPs and for submitting bids and establishing single payment amounts under the CBPs for certain groupings of similar items with different features to address price inversions. Final changes also are made to the method for establishing bid limits for items under the DMEPOS CBPs. In addition, this rule summarizes comments on the impacts of coordinating Medicare and Medicaid Durable Medical Equipment for dually eligible beneficiaries. Finally, this rule also summarizes comments received in response to a request for information related to the Comprehensive ESRD Care Model and future payment models affecting renal care.

  15. Defect Prevention and Detection in Software for Automated Test Equipment

    SciTech Connect

    E. Bean

    2006-11-30

    Software for automated test equipment can be tedious and monotonous making it just as error-prone as other software. Active defect prevention and detection are also important for test applications. Incomplete or unclear requirements, a cryptic syntax used for some test applications—especially script-based test sets, variability in syntax or structure, and changing requirements are among the problems encountered in one tester. Such problems are common to all software but can be particularly problematic in test equipment software intended to test another product. Each of these issues increases the probability of error injection during test application development. This report describes a test application development tool designed to address these issues and others for a particular piece of test equipment. By addressing these problems in the development environment, the tool has powerful built-in defect prevention and detection capabilities. Regular expressions are widely used in the development tool as a means of formally defining test equipment requirements for the test application and verifying conformance to those requirements. A novel means of using regular expressions to perform range checking was developed. A reduction in rework and increased productivity are the results. These capabilities are described along with lessons learned and their applicability to other test equipment software. The test application development tool, or “application builder”, is known as the PT3800 AM Creation, Revision and Archiving Tool (PACRAT).

  16. First principles of Hamiltonian medicine.

    PubMed

    Crespi, Bernard; Foster, Kevin; Úbeda, Francisco

    2014-05-19

    We introduce the field of Hamiltonian medicine, which centres on the roles of genetic relatedness in human health and disease. Hamiltonian medicine represents the application of basic social-evolution theory, for interactions involving kinship, to core issues in medicine such as pathogens, cancer, optimal growth and mental illness. It encompasses three domains, which involve conflict and cooperation between: (i) microbes or cancer cells, within humans, (ii) genes expressed in humans, (iii) human individuals. A set of six core principles, based on these domains and their interfaces, serves to conceptually organize the field, and contextualize illustrative examples. The primary usefulness of Hamiltonian medicine is that, like Darwinian medicine more generally, it provides novel insights into what data will be productive to collect, to address important clinical and public health problems. Our synthesis of this nascent field is intended predominantly for evolutionary and behavioural biologists who aspire to address questions directly relevant to human health and disease.

  17. First principles of Hamiltonian medicine

    PubMed Central

    Crespi, Bernard; Foster, Kevin; Úbeda, Francisco

    2014-01-01

    We introduce the field of Hamiltonian medicine, which centres on the roles of genetic relatedness in human health and disease. Hamiltonian medicine represents the application of basic social-evolution theory, for interactions involving kinship, to core issues in medicine such as pathogens, cancer, optimal growth and mental illness. It encompasses three domains, which involve conflict and cooperation between: (i) microbes or cancer cells, within humans, (ii) genes expressed in humans, (iii) human individuals. A set of six core principles, based on these domains and their interfaces, serves to conceptually organize the field, and contextualize illustrative examples. The primary usefulness of Hamiltonian medicine is that, like Darwinian medicine more generally, it provides novel insights into what data will be productive to collect, to address important clinical and public health problems. Our synthesis of this nascent field is intended predominantly for evolutionary and behavioural biologists who aspire to address questions directly relevant to human health and disease. PMID:24686937

  18. Fundamental base closure environmental principles

    SciTech Connect

    Yim, R.A.

    1994-12-31

    Military base closures present a paradox. The rate, scale and timing of military base closures is historically unique. However, each base itself typically does not present unique problems. Thus, the challenge is to design innovative solutions to base redevelopment and remediation issues, while simultaneously adopting common, streamlined or pre-approved strategies to shared problems. The author presents six environmental principles that are fundamental to base closure. They are: remediation not clean up; remediation will impact reuse; reuse will impact remediation; remediation and reuse must be coordinated; environmental contamination must be evaluated as any other initial physical constraint on development, not as an overlay after plans are created; and remediation will impact development, financing and marketability.

  19. 29 CFR 1926.952 - Mechanical equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.952... equipment that are not covered with insulating protective equipment. (c) Cranes and other lifting equipment...

  20. 29 CFR 1926.952 - Mechanical equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.952... equipment that are not covered with insulating protective equipment. (c) Cranes and other lifting equipment...

  1. 29 CFR 1926.952 - Mechanical equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.952... equipment that are not covered with insulating protective equipment. (c) Cranes and other lifting equipment...

  2. 49 CFR 195.430 - Firefighting equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... PIPELINE Operation and Maintenance § 195.430 Firefighting equipment. Each operator shall maintain adequate firefighting equipment at each pump station and breakout tank area. The equipment must be— (a) In...

  3. 49 CFR 195.430 - Firefighting equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... PIPELINE Operation and Maintenance § 195.430 Firefighting equipment. Each operator shall maintain adequate firefighting equipment at each pump station and breakout tank area. The equipment must be— (a) In...

  4. 49 CFR 195.430 - Firefighting equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... PIPELINE Operation and Maintenance § 195.430 Firefighting equipment. Each operator shall maintain adequate firefighting equipment at each pump station and breakout tank area. The equipment must be— (a) In...

  5. 49 CFR 195.430 - Firefighting equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PIPELINE Operation and Maintenance § 195.430 Firefighting equipment. Each operator shall maintain adequate firefighting equipment at each pump station and breakout tank area. The equipment must be— (a) In...

  6. Medical equipment leasing. Benefits and opportunities.

    PubMed

    Hill, R

    1995-03-01

    Medical equipment manufacturers throughout Europe now have the opportunity to take advantage of changes in the United Kingdom Treasury rules, which introduce flexibility into hospital financing. This could result in more equipment sales for manufacturers and better equipped hospitals.

  7. 40 CFR 264.32 - Required equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...), spill control equipment, and decontamination equipment; and (d) Water at adequate volume and pressure to supply water hose streams, or foam producing equipment, or automatic sprinklers, or water spray systems. ...

  8. 40 CFR 264.32 - Required equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...), spill control equipment, and decontamination equipment; and (d) Water at adequate volume and pressure to supply water hose streams, or foam producing equipment, or automatic sprinklers, or water spray systems. ...

  9. 40 CFR 264.32 - Required equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...), spill control equipment, and decontamination equipment; and (d) Water at adequate volume and pressure to supply water hose streams, or foam producing equipment, or automatic sprinklers, or water spray systems. ...

  10. Trench Protection and Principles of Pipe Laying. Instructor Manual. Trainee Manual.

    ERIC Educational Resources Information Center

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet contains the instructor and trainee manuals for a course dealing with trench protection and principles of pipe laying. Part 1 is the instructor guide for an 80-hour course--12 classroom hours and 68 hours of hands-on exercises. Contents are as follows: a course outline; course schedule; equipment list; material and equipment checklist;…

  11. Trench Protection and Principles of Pipe Laying. Instructor Manual. Trainee Manual.

    ERIC Educational Resources Information Center

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet contains the instructor and trainee manuals for a course dealing with trench protection and principles of pipe laying. Part 1 is the instructor guide for an 80-hour course--12 classroom hours and 68 hours of hands-on exercises. Contents are as follows: a course outline; course schedule; equipment list; material and equipment checklist;…

  12. Scottish Schools Science Equipment Research Centre, Bulletin No. 72, June, 1974.

    ERIC Educational Resources Information Center

    Scottish Schools Science Equipment Research Centre, Edinburgh.

    This issue of the newsletter discusses, in much detail, physics equipment useful for the construction of logic units; and alerts science teachers to the fact that ammonia can be made to burn in air. (PEB)

  13. Ventilation Cooling: An Old Solution to New Problems. Part 2: The Equipment.

    ERIC Educational Resources Information Center

    DiMercurio, C.

    1981-01-01

    This second article in a series about cooling classrooms by ventilation describes the equipment available to help save energy and money. The first article appeared in the July 1981 issue. (Author/MLF)

  14. 78 FR 18416 - Sixth Meeting: RTCA Special Committee 226, Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... Federal Aviation Administration Sixth Meeting: RTCA Special Committee 226, Audio Systems and Equipment... Notice of RTCA Special Committee 226, Audio Systems and Equipment. SUMMARY: The FAA is issuing this notice to advise the public of the sixth meeting of the RTCA Special Committee 226, Audio Systems and...

  15. 78 FR 57673 - Eighth Meeting: RTCA Special Committee 226, Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-19

    ... Federal Aviation Administration Eighth Meeting: RTCA Special Committee 226, Audio Systems and Equipment... Notice of RTCA Special Committee 226, Audio Systems and Equipment. SUMMARY: The FAA is issuing this notice to advise the public of the eighth meeting of the RTCA Special Committee 226, Audio Systems and...

  16. 47 CFR 5.87 - Frequencies for field strength surveys or equipment demonstrations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 1 2012-10-01 2012-10-01 false Frequencies for field strength surveys or equipment demonstrations. 5.87 Section 5.87 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL... strength surveys or equipment demonstrations. (a) Authorizations issued under §§ 5.3 (e) and (f) of this...

  17. 47 CFR 5.87 - Frequencies for field strength surveys or equipment demonstrations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Frequencies for field strength surveys or equipment demonstrations. 5.87 Section 5.87 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL... strength surveys or equipment demonstrations. (a) Authorizations issued under §§ 5.3 (e) and (f) of this...

  18. Applicability of the beamed power concept to lunar rovers, construction, mining, explorers and other mobile equipment

    NASA Technical Reports Server (NTRS)

    Christian, Jose L., Jr.

    1989-01-01

    Some of the technical issues dealing with the feasibility of high power (10 Kw to 100 Kw) mobile manned equipment for settlement, exploration and exploitation of Lunar resources are addressed. Short range mining/construction equipment, a moderate range (50 Km) exploration vehicle, and an unlimited range explorer are discussed.

  19. 47 CFR 5.87 - Frequencies for field strength surveys or equipment demonstrations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Frequencies for field strength surveys or equipment demonstrations. 5.87 Section 5.87 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL... strength surveys or equipment demonstrations. (a) Authorizations issued under §§ 5.3 (e) and (f) of...

  20. Applying the four principles.

    PubMed

    Macklin, R

    2003-10-01

    Gillon is correct that the four principles provide a sound and useful way of analysing moral dilemmas. As he observes, the approach using these principles does not provide a unique solution to dilemmas. This can be illustrated by alternatives to Gillon's own analysis of the four case scenarios. In the first scenario, a different set of factual assumptions could yield a different conclusion about what is required by the principle of beneficence. In the second scenario, although Gillon's conclusion is correct, what is open to question is his claim that what society regards as the child's best interest determines what really is in the child's best interest. The third scenario shows how it may be reasonable for the principle of beneficence to take precedence over autonomy in certain circumstances, yet like the first scenario, the ethical conclusion relies on a set of empirical assumptions and predictions of what is likely to occur. The fourth scenario illustrates how one can draw different conclusions based on the importance given to the precautionary principle.

  1. Principles of multisensory behavior.

    PubMed

    Otto, Thomas U; Dassy, Brice; Mamassian, Pascal

    2013-04-24

    The combined use of multisensory signals is often beneficial. Based on neuronal recordings in the superior colliculus of cats, three basic rules were formulated to describe the effectiveness of multisensory signals: the enhancement of neuronal responses to multisensory compared with unisensory signals is largest when signals occur at the same location ("spatial rule"), when signals are presented at the same time ("temporal rule"), and when signals are rather weak ("principle of inverse effectiveness"). These rules are also considered with respect to multisensory benefits as observed with behavioral measures, but do they capture these benefits best? To uncover the principles that rule benefits in multisensory behavior, we here investigated the classical redundant signal effect (RSE; i.e., the speedup of response times in multisensory compared with unisensory conditions) in humans. Based on theoretical considerations using probability summation, we derived two alternative principles to explain the effect. First, the "principle of congruent effectiveness" states that the benefit in multisensory behavior (here the speedup of response times) is largest when behavioral performance in corresponding unisensory conditions is similar. Second, the "variability rule" states that the benefit is largest when performance in corresponding unisensory conditions is unreliable. We then tested these predictions in two experiments, in which we manipulated the relative onset and the physical strength of distinct audiovisual signals. Our results, which are based on a systematic analysis of response time distributions, show that the RSE follows these principles very well, thereby providing compelling evidence in favor of probability summation as the underlying combination rule.

  2. A Principle of Intentionality

    PubMed Central

    Turner, Charles K.

    2017-01-01

    The mainstream theories and models of the physical sciences, including neuroscience, are all consistent with the principle of causality. Wholly causal explanations make sense of how things go, but are inherently value-neutral, providing no objective basis for true beliefs being better than false beliefs, nor for it being better to intend wisely than foolishly. Dennett (1987) makes a related point in calling the brain a syntactic (procedure-based) engine. He says that you cannot get to a semantic (meaning-based) engine from there. He suggests that folk psychology revolves around an intentional stance that is independent of the causal theories of the brain, and accounts for constructs such as meanings, agency, true belief, and wise desire. Dennett proposes that the intentional stance is so powerful that it can be developed into a valid intentional theory. This article expands Dennett’s model into a principle of intentionality that revolves around the construct of objective wisdom. This principle provides a structure that can account for all mental processes, and for the scientific understanding of objective value. It is suggested that science can develop a far more complete worldview with a combination of the principles of causality and intentionality than would be possible with scientific theories that are consistent with the principle of causality alone. PMID:28223954

  3. A Principle of Intentionality.

    PubMed

    Turner, Charles K

    2017-01-01

    The mainstream theories and models of the physical sciences, including neuroscience, are all consistent with the principle of causality. Wholly causal explanations make sense of how things go, but are inherently value-neutral, providing no objective basis for true beliefs being better than false beliefs, nor for it being better to intend wisely than foolishly. Dennett (1987) makes a related point in calling the brain a syntactic (procedure-based) engine. He says that you cannot get to a semantic (meaning-based) engine from there. He suggests that folk psychology revolves around an intentional stance that is independent of the causal theories of the brain, and accounts for constructs such as meanings, agency, true belief, and wise desire. Dennett proposes that the intentional stance is so powerful that it can be developed into a valid intentional theory. This article expands Dennett's model into a principle of intentionality that revolves around the construct of objective wisdom. This principle provides a structure that can account for all mental processes, and for the scientific understanding of objective value. It is suggested that science can develop a far more complete worldview with a combination of the principles of causality and intentionality than would be possible with scientific theories that are consistent with the principle of causality alone.

  4. Spectral imaging: principles and applications.

    PubMed

    Garini, Yuval; Young, Ian T; McNamara, George

    2006-08-01

    Spectral imaging extends the capabilities of biological and clinical studies to simultaneously study multiple features such as organelles and proteins qualitatively and quantitatively. Spectral imaging combines two well-known scientific methodologies, namely spectroscopy and imaging, to provide a new advantageous tool. The need to measure the spectrum at each point of the image requires combining dispersive optics with the more common imaging equipment, and introduces constrains as well. The principles of spectral imaging and a few representative applications are described. Spectral imaging analysis is necessary because the complex data structure cannot be analyzed visually. A few of the algorithms are discussed with emphasis on the usage for different experimental modes (fluorescence and bright field). Finally, spectral imaging, like any method, should be evaluated in light of its advantages to specific applications, a selection of which is described. Spectral imaging is a relatively new technique and its full potential is yet to be exploited. Nevertheless, several applications have already shown its potential. (c) 2006 International Society for Analytical Cytology.

  5. Hyperbaric intensive care technology and equipment.

    PubMed

    Millar, Ian L

    2015-03-01

    In an emergency, life support can be provided during recompression or hyperbaric oxygen therapy using very basic equipment, provided the equipment is hyperbaric-compatible and the clinicians have appropriate experience. For hyperbaric critical care to be provided safely on a routine basis, however, a great deal of preparation and specific equipment is needed, and relatively few facilities have optimal capabilities at present. The type, size and location of the chamber are very influential factors. Although monoplace chamber critical care is possible, it involves special adaptations and inherent limitations that make it inappropriate for all but specifically experienced teams. A large, purpose-designed chamber co-located with an intensive care unit is ideal. Keeping the critically ill patient on their normal bed significantly improves quality of care where this is possible. The latest hyperbaric ventilators have resolved many of the issues normally associated with hyperbaric ventilation, but at significant cost. Multi-parameter monitoring is relatively simple with advanced portable monitors, or preferably installed units that are of the same type as used elsewhere in the hospital. Whilst end-tidal CO₂ readings are changed by pressure and require interpretation, most other parameters display normally. All normal infusions can be continued, with several examples of syringe drivers and infusion pumps shown to function essentially normally at pressure. Techniques exist for continuous suction drainage and most other aspects of standard critical care. At present, the most complex life support technologies such as haemofiltration, cardiac assist devices and extra-corporeal membrane oxygenation remain incompatible with the hyperbaric environment.

  6. Principles of Naval Engineering.

    ERIC Educational Resources Information Center

    Naval Personnel Program Support Activity, Washington, DC.

    Fundamentals of shipboard machinery, equipment, and engineering plants are presented in this text prepared for engineering officers. A general description is included of the development of naval ships, ship design and construction, stability and buoyancy, and damage and casualty control. Engineering theories are explained on the background of ship…

  7. Remote welding equipment for TPX

    SciTech Connect

    Silke, G.W.; Junge, R.

    1995-12-31

    Remote welding equipment and techniques are necessary for maintenance of the Tokamak Physics Experiment (TPX) Plasma Facing Components (PFCs). The processes identified for this application includes inside diameter (i.d.) and outside diameter (o.d.) Gas Tungsten Arc (GTA) welding of titanium and stainless steel alloys. Welding equipment developed for this application includes some unique features due to the specialized environment of the TPX vessel. Remote features of this equipment must include the ability to acquire and align the parts being welded, perform all welding operations and visually inspect the weld area. Designs for weld heads require the integration of industry proven hardware with the special features include compact size, remote manipulation, remote clamping and alignment, remote vision, full inert gas coverage, arc voltage control, wire feed, programmable weld schedules and failure recovery.

  8. Intelligent Scheduling for Underground Mobile Mining Equipment.

    PubMed

    Song, Zhen; Schunnesson, Håkan; Rinne, Mikael; Sturgul, John

    2015-01-01

    Many studies have been carried out and many commercial software applications have been developed to improve the performances of surface mining operations, especially for the loader-trucks cycle of surface mining. However, there have been quite few studies aiming to improve the mining process of underground mines. In underground mines, mobile mining equipment is mostly scheduled instinctively, without theoretical support for these decisions. Furthermore, in case of unexpected events, it is hard for miners to rapidly find solutions to reschedule and to adapt the changes. This investigation first introduces the motivation, the technical background, and then the objective of the study. A decision support instrument (i.e. schedule optimizer for mobile mining equipment) is proposed and described to address this issue. The method and related algorithms which are used in this instrument are presented and discussed. The proposed method was tested by using a real case of Kittilä mine located in Finland. The result suggests that the proposed method can considerably improve the working efficiency and reduce the working time of the underground mine.

  9. Intelligent Scheduling for Underground Mobile Mining Equipment

    PubMed Central

    Song, Zhen; Schunnesson, Håkan; Rinne, Mikael; Sturgul, John

    2015-01-01

    Many studies have been carried out and many commercial software applications have been developed to improve the performances of surface mining operations, especially for the loader-trucks cycle of surface mining. However, there have been quite few studies aiming to improve the mining process of underground mines. In underground mines, mobile mining equipment is mostly scheduled instinctively, without theoretical support for these decisions. Furthermore, in case of unexpected events, it is hard for miners to rapidly find solutions to reschedule and to adapt the changes. This investigation first introduces the motivation, the technical background, and then the objective of the study. A decision support instrument (i.e. schedule optimizer for mobile mining equipment) is proposed and described to address this issue. The method and related algorithms which are used in this instrument are presented and discussed. The proposed method was tested by using a real case of Kittilä mine located in Finland. The result suggests that the proposed method can considerably improve the working efficiency and reduce the working time of the underground mine. PMID:26098934

  10. Power Product Equipment Technician: Construction Equipment. Teacher Edition. Student Edition.

    ERIC Educational Resources Information Center

    Hilley, Robert

    The instructor's guide in this package, which is one in a series of new publications developed to replace the Multistate Academic and Vocational Curriculum Consortium's previous small-engine curricula, contains the materials required to teach a competency-based course in repairing construction equipment. The guide begins with an introduction…

  11. Power Product Equipment Technician: Construction Equipment. Teacher Edition. Student Edition.

    ERIC Educational Resources Information Center

    Hilley, Robert

    The instructor's guide in this package, which is one in a series of new publications developed to replace the Multistate Academic and Vocational Curriculum Consortium's previous small-engine curricula, contains the materials required to teach a competency-based course in repairing construction equipment. The guide begins with an introduction…

  12. Heavy Equipment Operator: General Equipment Operator. Instructional Materials.

    ERIC Educational Resources Information Center

    Hendrix, Laborn J.; Sawatzky, Joyce

    Developed through close coordination between contractors, construction workers, and vocational educators, this instructor's manual is designed to help heavy equipment instructors present materials in a systematic format. The instructional materials in the manual are written in terms of student performance, using measurable behavioral objectives.…

  13. Equipping the Open-Plan School, Equipping for Open Education.

    ERIC Educational Resources Information Center

    Lassiter, Frank

    The performance specifications of furniture and equipment for open education and open-plan schools differ from conventional classroom furniture in that it must be easily moved, have a range of dimensions, contain multipurpose interchangeable components, and be designed to accommodate a variety of student/teacher uses. The author suggests some…

  14. AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XVI, LEARNING ABOUT AC GENERATOR (ALTERNATOR) PRINCIPLES (PART I).

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATING PRINCIPLES OF ALTERNATING CURRENT GENERATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE REVIEWING ELECTRICAL FUNDAMENTALS, AND OPERATING PRINCIPLES OF ALTERNATORS. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL PROGRAMED TRAINING FILM "AC GENERATORS…

  15. AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XVII, LEARNING ABOUT AC GENERATOR (ALTERNATOR) PRINCIPLES (PART II).

    ERIC Educational Resources Information Center

    Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

    THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATING PRINCIPLES AND THE SERVICING AND TESTING PROCEDURES FOR ALTERNATING CURRENT (AC) GENERATORS AND REGULATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE REVIEW OF ALTERNATOR PRINCIPLES, ALTERNATOR SERVICING AND TESTING, ALTERNATOR REGULATOR OPERATING…

  16. Spaceborne receivers: Basic principles

    NASA Technical Reports Server (NTRS)

    Stacey, J. M.

    1984-01-01

    The underlying principles of operation of microwave receivers for space observations of planetary surfaces were examined. The design philosophy of the receiver as it is applied to operate functionally as an efficient receiving system, the principle of operation of the key components of the receiver, and the important differences among receiver types are explained. The operating performance and the sensitivity expectations for both the modulated and total power receiver configurations are outlined. The expressions are derived from first principles and are developed through the important intermediate stages to form practicle and easily applied equations. The transfer of thermodynamic energy from point to point within the receiver is illustrated. The language of microwave receivers is applied statistics.

  17. Advanced deep sea diving equipment

    NASA Technical Reports Server (NTRS)

    Danesi, W. A.

    1972-01-01

    Design requirements are generated for a deep sea heavy duty diving system to equip salvage divers with equipment and tools that permit work of the same quality and in times approaching that done on the surface. The system consists of a helmet, a recirculator for removing carbon dioxide, and the diver's dress. The diver controls the inlet flow by the recirculatory control valve and is able to change closed cycle operation to open cycle if malfunction occurs. Proper function of the scrubber in the recirculator minimizes temperature and humidity effects as it filters the returning air.

  18. Robot Would Reconfigure Modular Equipment

    NASA Technical Reports Server (NTRS)

    Purves, Lloyd R.

    1993-01-01

    Special-purpose sets of equipment, packaged in identical modules with identical interconnecting mechanisms, attached to or detached from each other by specially designed robot, according to proposal. Two-arm walking robot connects and disconnects modules, operating either autonomously or under remote supervision. Robot walks along row of connected modules by grasping successive attachment subassemblies in hand-over-hand motion. Intended application for facility or station in outer space; robot reconfiguration scheme makes it unnecessary for astronauts to venture outside spacecraft or space station. Concept proves useful on Earth in assembly, disassembly, or reconfiguration of equipment in such hostile environments as underwater, near active volcanoes, or in industrial process streams.

  19. Leasing equipment minimizes capital investment.

    PubMed

    Zimmerman, M E; Maier, R A

    1989-03-01

    As consumers continue to demand the most advanced technology at the lowest cost, healthcare organizations are turning to leasing as a way of acquiring equipment with a minimum amount of capital investment. Institutions considering leasing should determine their balance sheet constraints, compare the relative costs of debt financing and leasing, and assess the residual value of the equipment at the end of its use. Comparing potential lessors requires careful analysis of rate structures and the capability of the companies to commit to a contract promptly.

  20. Steps of Reprocessing and Equipments

    PubMed Central

    Lee, Yong Kook

    2013-01-01

    With the increasing interest in endoscopy and the rising number of endoscopic examinations in hospitals, the importance of endoscopic reprocessing is also increasing. Cure facilities that are understaffed and ill-equipped are trying to cope with the problems of insufficient cleaning and high infection risks. To prevent endoscopy-associated infection, the endoscope cleaning, and disinfection guidelines prepared by the Korean Society of Gastrointestinal Endoscopy must be followed. In this review, the steps of endoscopic reprocessing and the equipments required in each step are discussed. PMID:23767039

  1. Teaching/learning principles

    NASA Technical Reports Server (NTRS)

    Hankins, D. B.; Wake, W. H.

    1981-01-01

    The potential remote sensing user community is enormous, and the teaching and training tasks are even larger; however, some underlying principles may be synthesized and applied at all levels from elementary school children to sophisticated and knowledgeable adults. The basic rules applying to each of the six major elements of any training course and the underlying principle involved in each rule are summarized. The six identified major elements are: (1) field sites for problems and practice; (2) lectures and inside study; (3) learning materials and resources (the kit); (4) the field experience; (5) laboratory sessions; and (6) testing and evaluation.

  2. [Ethical principles in electronvulsivotherapy].

    PubMed

    Richa, S; De Carvalho, W

    2016-12-01

    ECT or electroconvulsive therapy (ECT) is a therapeutic technique invented in 1935 but which was really developed after World War II and then spreading widely until the mid 1960s. The source of this technique, and some forms of stigma including films, have participated widely to make it suspect from a moral point of view. The ethical principles that support the establishment of a treatment by ECT are those relating to any action in psychiatry and are based on the one hand on the founding principles of bioethics: autonomy, beneficence, non-malfeasance, and justice, and on the other hand on the information on the technical and consent to this type of care.

  3. Itch Management: General Principles.

    PubMed

    Misery, Laurent

    2016-01-01

    Like pain, itch is a challenging condition that needs to be managed. Within this setting, the first principle of itch management is to get an appropriate diagnosis to perform an etiology-oriented therapy. In several cases it is not possible to treat the cause, the etiology is undetermined, there are several causes, or the etiological treatment is not effective enough to alleviate itch completely. This is also why there is need for symptomatic treatment. In all patients, psychological support and associated pragmatic measures might be helpful. General principles and guidelines are required, yet patient-centered individual care remains fundamental. © 2016 S. Karger AG, Basel.

  4. Modeling and simulation of plasma processing equipment

    NASA Astrophysics Data System (ADS)

    Kim, Heon Chang

    Currently plasma processing technology is utilized in a wide range of applications including advanced Integrated Circuit (IC) fabrication. Traditionally, plasma processing equipments have been empirically designed and optimized at great expense of development time and cost. This research proposes the development of a first principle based, multidimensional plasma process simulator with the aim of enhancing the equipment design procedure. The proposed simulator accounts for nonlinear interactions among various plasma chemistry and physics, neutral chemistry and transport, and dust transport phenomena. A three moment modeling approach is employed that shows good predictive capabilities at reasonable computational expense. For numerical efficiency, various versions of explicit and implicit Essentially Non- Oscillatory (ENO) algorithms are employed. For the rapid evaluation of time-periodic steady-state solutions, a feedback control approach is employed. Two dimensional simulation results of capacitively coupled rf plasmas show that ion bombardment uniformity can be improved through simulation based design of the plasma process. Through self-consistent simulations of an rf triode, it is also shown that effects of secondary rf voltage and frequency on ion bombardment energy can be accurately captured. These results prove that scaling relations among important process variables can be identified through the three moment modeling and simulation approach. Through coupling of the plasma model with a neutral chemistry and transport model, spatiotemporal distributions of both charged and uncharged species, including metastables, are predicted for an oxygen plasma. Furthermore, simulation results also verify the existence of a double layer in this electronegative plasma. Through Lagrangian simulation of dust in a plasma reactor, it is shown that small particles are accumulate near the center and the radial sheath boundary depending on their initial positions while large

  5. Equipment

    ERIC Educational Resources Information Center

    Education in Chemistry, 1976

    1976-01-01

    Described are a number of publications and items for use in chemistry. Included are brief descriptions of actuators, thermometer strips, current balances, and a variety of catalogues and other publications. (RH)

  6. Equipment

    ERIC Educational Resources Information Center

    Education in Chemistry, 1976

    1976-01-01

    Described are a number of publications and items for use in chemistry. Included are brief descriptions of actuators, thermometer strips, current balances, and a variety of catalogues and other publications. (RH)

  7. Housing, Home Furnishings, and Equipment.

    ERIC Educational Resources Information Center

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    Designed for use in consumer and homemaking education in Texas, this curriculum guide is on the subject of housing, home furnishings, and equipment. An introduction to the guide, covering its use and program and curriculum planning, provides a list of suggested readings. Information on teaching handicapped and disadvantaged students follows. The…

  8. Computer Equipment Repair Curriculum Guide.

    ERIC Educational Resources Information Center

    Reneau, Fred; And Others

    This guide is intended for use in a course to train students to repair computer equipment and perform related administrative and customer service tasks. Addressed in the individual units are the following topics (with selected subtopics in brackets): performing administrative functions (preparing service bills, maintaining accounts and labor…

  9. Preventive Maintenance Handbook. Audiovisual Equipment.

    ERIC Educational Resources Information Center

    Educational Products Information Exchange Inst., Stony Brook, NY.

    The preventive maintenance system for audiovisual equipment presented in this handbook is designed by specialists so that it can be used by nonspecialists in school sites. The report offers specific advice on saftey factors and also lists major problems that should not be handled by nonspecialists. Other aspects of a preventive maintenance system…

  10. Television Equipment Specialist (AFSC 30455).

    ERIC Educational Resources Information Center

    Green, James S.; And Others

    This document contains the six volumes of an Air Force correspondence course in television equipment repair. Each volume consists of student learning objectives, information, exercises, answers to exercises, and in some volumes, review modules on related topics. A volume review exercise is included for each volume. The first volume provides…

  11. Strategy Guideline. HVAC Equipment Sizing

    SciTech Connect

    Burdick, Arlan

    2012-02-01

    This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, FL. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  12. Housing, Home Furnishings, and Equipment.

    ERIC Educational Resources Information Center

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    Designed for use in consumer and homemaking education in Texas, this curriculum guide is on the subject of housing, home furnishings, and equipment. An introduction to the guide, covering its use and program and curriculum planning, provides a list of suggested readings. Information on teaching handicapped and disadvantaged students follows. The…

  13. Lawn and Garden Equipment Repair.

    ERIC Educational Resources Information Center

    Hardway, Jack; And Others

    This publication is designed to supplement the Comprehensive Small Engine Rapair guide by covering in detail all aspects of lawn and garden equipment repair not included in general engine repair or the repair of other small engines. It consists of instructional materials for both teachers and students, written in terms of student performance using…

  14. Using Gaming Equipment to Teach

    ERIC Educational Resources Information Center

    Curriculum Review, 2009

    2009-01-01

    Gaming equipment (such as Nintendo's Wii[TM]) is making its way to schools and classrooms. However, most of the discussion regarding how to use this technology and integrate it into lesson plans is happening in blogs on the Internet. An advocate of interactive media in the classroom, Dr. Dawn Hawkins, a faculty member for the Art Institute of…

  15. Multimedia Equipment for Distance Education.

    ERIC Educational Resources Information Center

    Schiller, Scott S.

    1993-01-01

    Discusses the use of multimedia equipment for distance education. Topics addressed include use of the Internet; distance learning for educators; and cable television and/or fiber optics, including interactive television and satellite technology. A sidebar lists online and telecommunications providers. (LRW)

  16. Basic Comfort Heating Principles.

    ERIC Educational Resources Information Center

    Dempster, Chalmer T.

    The material in this beginning book for vocational students presents fundamental principles needed to understand the heating aspect of the sheet metal trade and supplies practical experience to the student so that he may become familiar with the process of determining heat loss for average structures. Six areas covered are: (1) Background…

  17. Extended Mach Principle.

    ERIC Educational Resources Information Center

    Rosen, Joe

    1981-01-01

    Discusses the meaning of symmetry of the laws of physics and symmetry of the universe and the connection between symmetries and asymmetries of the laws of physics and those of the universe. An explanation of Hamilton's principle is offered. The material is suitable for informal discussions with students. (Author/SK)

  18. Fermat's Principle Revisited.

    ERIC Educational Resources Information Center

    Kamat, R. V.

    1991-01-01

    A principle is presented to show that, if the time of passage of light is expressible as a function of discrete variables, one may dispense with the more general method of the calculus of variations. The calculus of variations and the alternative are described. The phenomenon of mirage is discussed. (Author/KR)

  19. Principles for Principals.

    ERIC Educational Resources Information Center

    Luce, Wilbur M.

    1994-01-01

    A former central office curriculum supervisor drafted to manage an elementary school enumerates some principles for other principals: put kids first; seek advice from veteran principals; practice lead management; delegate responsibility and authority; support the superintendent and school board; eschew perfect control over situations; try not to…

  20. Principles of Cancer Screening

    PubMed Central

    Pinsky, Paul F.

    2015-01-01

    Synopsis Cancer screening has long been an important component of the struggle to reduce the burden of morbidity and mortality from cancer. Notwithstanding this history, many aspect of cancer screening remain poorly understood. This article presents a summary of basic principles of cancer screening that are relevant for researchers, clinicians and public health officials alike. PMID:26315516

  1. Euthanasia: Buddhist principles.

    PubMed

    Barnes, M

    1996-04-01

    Religions provide various forms of motivation for moral action. This chapter takes Buddhism as an example from within the Indian "family' of religions and seeks to identify the doctrinal and cultural principles on which ethical decisions are taken. Although beginning from very different religious premises, it is argued that the conclusions to which Buddhism tends are broadly similar to those found within mainstream Christianity.

  2. Principles of Cancer Screening.

    PubMed

    Pinsky, Paul F

    2015-10-01

    Cancer screening has long been an important component of the struggle to reduce the burden of morbidity and mortality from cancer. Notwithstanding this history, many aspects of cancer screening remain poorly understood. This article presents a summary of basic principles of cancer screening that are relevant for researchers, clinicians, and public health officials alike.

  3. Principles of natural regeneration

    Treesearch

    Paul S. Johnson

    1989-01-01

    To maximize chances of successful regeneration, carefully consider the following regeneration principles. Harvesting alone does not guarantee that the desired species will be established. The conditions required for the initial establishment and early growth of the desired species largely determine what regeneration method you should use and any supplemental treatments...

  4. The Principles of Readability

    ERIC Educational Resources Information Center

    DuBay, William H.

    2004-01-01

    The principles of readability are in every style manual. Readability formulas are in every writing aid. What is missing is the research and theory on which they stand. This short review of readability research spans 100 years. The first part covers the history of adult literacy studies in the U.S., establishing the stratified nature of the adult…

  5. Basic Comfort Heating Principles.

    ERIC Educational Resources Information Center

    Dempster, Chalmer T.

    The material in this beginning book for vocational students presents fundamental principles needed to understand the heating aspect of the sheet metal trade and supplies practical experience to the student so that he may become familiar with the process of determining heat loss for average structures. Six areas covered are: (1) Background…

  6. The Idiom Principle Revisited

    ERIC Educational Resources Information Center

    Siyanova-Chanturia, Anna; Martinez, Ron

    2015-01-01

    John Sinclair's Idiom Principle famously posited that most texts are largely composed of multi-word expressions that "constitute single choices" in the mental lexicon. At the time that assertion was made, little actual psycholinguistic evidence existed in support of that holistic, "single choice," view of formulaic language. In…

  7. Business Principles 201.

    ERIC Educational Resources Information Center

    Manitoba Dept. of Education, Winnipeg.

    This teaching guide consists of guidelines for conducting a secondary-level course on business principles. Intended as part of an office skills or accounting/data processing program, the course provides the management viewpoint toward the planning and operation of a business. First, the goals and objectives of the course are outlined. Provided…

  8. Principles of sound ecotoxicology.

    PubMed

    Harris, Catherine A; Scott, Alexander P; Johnson, Andrew C; Panter, Grace H; Sheahan, Dave; Roberts, Mike; Sumpter, John P

    2014-03-18

    We have become progressively more concerned about the quality of some published ecotoxicology research. Others have also expressed concern. It is not uncommon for basic, but extremely important, factors to apparently be ignored. For example, exposure concentrations in laboratory experiments are sometimes not measured, and hence there is no evidence that the test organisms were actually exposed to the test substance, let alone at the stated concentrations. To try to improve the quality of ecotoxicology research, we suggest 12 basic principles that should be considered, not at the point of publication of the results, but during the experimental design. These principles range from carefully considering essential aspects of experimental design through to accurately defining the exposure, as well as unbiased analysis and reporting of the results. Although not all principles will apply to all studies, we offer these principles in the hope that they will improve the quality of the science that is available to regulators. Science is an evidence-based discipline and it is important that we and the regulators can trust the evidence presented to us. Significant resources often have to be devoted to refuting the results of poor research when those resources could be utilized more effectively.

  9. Fermat's Principle Revisited.

    ERIC Educational Resources Information Center

    Kamat, R. V.

    1991-01-01

    A principle is presented to show that, if the time of passage of light is expressible as a function of discrete variables, one may dispense with the more general method of the calculus of variations. The calculus of variations and the alternative are described. The phenomenon of mirage is discussed. (Author/KR)

  10. Seven Foundational Principles of Population Health Policy.

    PubMed

    Bhattacharya, Dru; Bhatt, Jay

    2017-02-13

    In 2016, Keyes and Galea issued 9 foundational principles of population health science and invited further deliberations by specialists to advance the field. This article presents 7 foundational principles of population health policy whose intersection with health care, public health, preventive medicine, and now population health, presents unique challenges. These principles are in response to a number of overarching questions that have arisen in over a decade of the authors' collective practice in the public and private sectors, and having taught policy within programs of medicine, law, nursing, and public health at the graduate and executive levels. The principles address an audience of practitioners and policy makers, mindful of the pressing health care challenges of our time, including: rising health-related expenditures, an aging population, workforce shortages, health disparities, and a backdrop of inequities rooted in social determinants that have not been adequately translated into formal policies or practices among the key stakeholders in population health. These principles are meant to empower stakeholders-whether it is the planner or the practitioner, the decision maker or the dedicated caregiver-and inform the development of practical tools, research, and education.

  11. Medical and rehabilitation issues in classical ballet.

    PubMed

    Stretanski, Michael F; Weber, G J

    2002-05-01

    Classical ballet is a demanding professional occupation, with participants who are often underserved in terms of accurate diagnosis and appropriate comprehensive medical care. The view that follows is designed to be as global and insightful as published to date. Specific rehabilitation considerations, dance mechanics, idiosyncratic differential diagnosis, and personality and equipment issues are discussed, and a rational view of dogma is presented.

  12. 40 CFR 160.61 - Equipment design.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  13. 40 CFR 792.61 - Equipment design.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 32 2014-07-01 2014-07-01 false Equipment design. 792.61 Section 792... (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  14. 40 CFR 160.61 - Equipment design.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  15. 40 CFR 792.61 - Equipment design.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 33 2012-07-01 2012-07-01 false Equipment design. 792.61 Section 792... (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  16. 40 CFR 160.61 - Equipment design.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  17. 40 CFR 792.61 - Equipment design.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 33 2013-07-01 2013-07-01 false Equipment design. 792.61 Section 792... (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  18. 14 CFR 23.1561 - Safety equipment.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Safety equipment. 23.1561 Section 23.1561... Markings and Placards § 23.1561 Safety equipment. (a) Safety equipment must be plainly marked as to method of operation. (b) Stowage provisions for required safety equipment must be marked for the benefit...

  19. 14 CFR 23.1561 - Safety equipment.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Safety equipment. 23.1561 Section 23.1561... Markings and Placards § 23.1561 Safety equipment. (a) Safety equipment must be plainly marked as to method of operation. (b) Stowage provisions for required safety equipment must be marked for the benefit...

  20. 14 CFR 23.1561 - Safety equipment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Safety equipment. 23.1561 Section 23.1561... Markings and Placards § 23.1561 Safety equipment. (a) Safety equipment must be plainly marked as to method of operation. (b) Stowage provisions for required safety equipment must be marked for the benefit...

  1. 14 CFR 23.1561 - Safety equipment.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Safety equipment. 23.1561 Section 23.1561... Markings and Placards § 23.1561 Safety equipment. (a) Safety equipment must be plainly marked as to method of operation. (b) Stowage provisions for required safety equipment must be marked for the benefit...

  2. 14 CFR 23.1561 - Safety equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety equipment. 23.1561 Section 23.1561... Markings and Placards § 23.1561 Safety equipment. (a) Safety equipment must be plainly marked as to method of operation. (b) Stowage provisions for required safety equipment must be marked for the benefit...

  3. 21 CFR 58.61 - Equipment design.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Equipment design. 58.61 Section 58.61 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in...

  4. 21 CFR 58.61 - Equipment design.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Equipment design. 58.61 Section 58.61 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in...

  5. 21 CFR 58.61 - Equipment design.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Equipment design. 58.61 Section 58.61 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in...

  6. 21 CFR 58.61 - Equipment design.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Equipment design. 58.61 Section 58.61 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in...

  7. 21 CFR 58.61 - Equipment design.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Equipment design. 58.61 Section 58.61 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in...

  8. 45 CFR 74.34 - Equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... equipment to be replaced as trade-in or sell the equipment and use the proceeds to offset the costs of the...) Acquisition date (or date received, if the equipment was furnished by the Federal Government) and cost; (vi) Information from which one can calculate the percentage of HHS's share in the cost of the equipment...

  9. 15 CFR 14.34 - Equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... equipment to be replaced as trade-in or sell the equipment and use the proceeds to offset the costs of the... by the Federal Government) and cost. (vi) Information from which one can calculate the percentage of Federal participation in the cost of the equipment (not applicable to equipment furnished by the...

  10. Energy-related laboratory equipment (ERLE) guidelines

    SciTech Connect

    Not Available

    1995-01-01

    This document describes the Used Energy-Related Laboratory Equipment grants, and eligibility and procedures for participation. The document contains tables identifying typical equipment that may be requested, where to review ERLE equipment lists, and where to mail applications, a description of the eligible equipment grants access data system, and a copy of the ERLE grant application and instructions for its completion and submission.

  11. 47 CFR 54.635 - Eligible equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... equipment. (a) Both individual and consortium applicants may receive support for network equipment necessary...) Consortium applicants may also receive support for network equipment necessary to manage, control, or maintain an eligible service or a dedicated health care broadband network. Support for network equipment is...

  12. 47 CFR 54.635 - Eligible equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... equipment. (a) Both individual and consortium applicants may receive support for network equipment necessary...) Consortium applicants may also receive support for network equipment necessary to manage, control, or maintain an eligible service or a dedicated health care broadband network. Support for network equipment is...

  13. 47 CFR 74.852 - Equipment changes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Equipment changes. 74.852 Section 74.852... Equipment changes. (a) The licensee of a low power auxiliary station may make any changes in the equipment that are deemed desirable or necessary, including replacement with certificated equipment, without...

  14. 47 CFR 74.550 - Equipment authorization.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Equipment authorization. 74.550 Section 74.550... § 74.550 Equipment authorization. Each authorization for aural broadcast STL, ICR, and booster stations shall require the use of equipment which has been certificated or verified. Equipment which has not been...

  15. 45 CFR 2543.34 - Equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 4 2011-10-01 2011-10-01 false Equipment. 2543.34 Section 2543.34 Public Welfare... Requirements Property Standards § 2543.34 Equipment. (a) Title to equipment acquired by a recipient with... not use equipment acquired with Federal funds to provide services to non-Federal outside organizations...

  16. 40 CFR 265.32 - Required equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... assistance from local police departments, fire departments, or State or local emergency response teams; (c) Portable fire extinguishers, fire control equipment (including special extinguishing equipment, such as that using foam, inert gas, or dry chemicals), spill control equipment, and decontamination equipment...

  17. 40 CFR 265.32 - Required equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... assistance from local police departments, fire departments, or State or local emergency response teams; (c) Portable fire extinguishers, fire control equipment (including special extinguishing equipment, such as that using foam, inert gas, or dry chemicals), spill control equipment, and decontamination equipment...

  18. 40 CFR 265.32 - Required equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... assistance from local police departments, fire departments, or State or local emergency response teams; (c) Portable fire extinguishers, fire control equipment (including special extinguishing equipment, such as that using foam, inert gas, or dry chemicals), spill control equipment, and decontamination equipment...

  19. 40 CFR 265.32 - Required equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... assistance from local police departments, fire departments, or State or local emergency response teams; (c) Portable fire extinguishers, fire control equipment (including special extinguishing equipment, such as that using foam, inert gas, or dry chemicals), spill control equipment, and decontamination equipment...

  20. 47 CFR 18.203 - Equipment authorization.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 1 2012-10-01 2012-10-01 false Equipment authorization. 18.203 Section 18.203 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Applications and Authorizations § 18.203 Equipment authorization. (a) Consumer ISM equipment, unless otherwise specified, must be authorized...

  1. 47 CFR 18.203 - Equipment authorization.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Equipment authorization. 18.203 Section 18.203 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Applications and Authorizations § 18.203 Equipment authorization. (a) Consumer ISM equipment, unless otherwise specified, must be authorized...

  2. 47 CFR 18.203 - Equipment authorization.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Equipment authorization. 18.203 Section 18.203 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Applications and Authorizations § 18.203 Equipment authorization. (a) Consumer ISM equipment, unless otherwise specified, must be authorized...

  3. 34 CFR 300.14 - Equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 2 2011-07-01 2010-07-01 true Equipment. 300.14 Section 300.14 Education Regulations... DISABILITIES General Definitions Used in This Part § 300.14 Equipment. Equipment means— (a) Machinery, utilities, and built-in equipment, and any necessary enclosures or structures to house the machinery...

  4. 7 CFR 58.626 - Packaging equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging equipment. 58.626 Section 58.626 Agriculture....626 Packaging equipment. Packaging equipment designed to mechanically fill and close single service... Standards for Equipment for Packaging Frozen Desserts and Cottage Cheese. Quality Specifications for...

  5. The Cost of Maintaining Educational Communications Equipment.

    ERIC Educational Resources Information Center

    Humphrey, David A.

    Tentative formulas for calculating the cost of maintaining educational communications equipment are proposed. The formulas are based on a survey of campuses of the State University of New York. The survey analyzed the types of equipment to be maintained, types of maintenance, who uses the equipment, who services the equipment, and the cost…

  6. 29 CFR 1910.430 - Equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... supply source) plus 100 psi. (d) Buoyancy control. (1) Helmets or masks connected directly to the dry suit or other buoyancy-changing equipment shall be equipped with an exhaust valve. (2) A dry suit or other buoyancy-changing equipment not directly connected to the helmet or mask shall be equipped with an...

  7. 29 CFR 1910.430 - Equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... supply source) plus 100 psi. (d) Buoyancy control. (1) Helmets or masks connected directly to the dry suit or other buoyancy-changing equipment shall be equipped with an exhaust valve. (2) A dry suit or other buoyancy-changing equipment not directly connected to the helmet or mask shall be equipped with an...

  8. 29 CFR 1910.430 - Equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... supply source) plus 100 psi. (d) Buoyancy control. (1) Helmets or masks connected directly to the dry suit or other buoyancy-changing equipment shall be equipped with an exhaust valve. (2) A dry suit or other buoyancy-changing equipment not directly connected to the helmet or mask shall be equipped with an...

  9. 46 CFR 197.460 - Diving equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Diving equipment. 197.460 Section 197.460 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Periodic Tests and Inspections of Diving Equipment § 197.460 Diving equipment. The diving supervisor shall insure that the diving equipment designated for...

  10. 15 CFR 400.15 - Production equipment.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 2 2014-01-01 2014-01-01 false Production equipment. 400.15 Section... Establish Zone; Limitations and Restrictions on Authority Granted § 400.15 Production equipment. (a) In... for use within such zone as production equipment or as parts for such equipment, shall not be subject...

  11. 15 CFR 400.15 - Production equipment.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 2 2013-01-01 2013-01-01 false Production equipment. 400.15 Section... Establish Zone; Limitations and Restrictions on Authority Granted § 400.15 Production equipment. (a) In... for use within such zone as production equipment or as parts for such equipment, shall not be subject...

  12. 40 CFR 160.61 - Equipment design.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably...

  13. 40 CFR 160.61 - Equipment design.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably...

  14. 40 CFR 792.61 - Equipment design.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Equipment design. 792.61 Section 792.61...) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall...

  15. 40 CFR 792.61 - Equipment design.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 32 2011-07-01 2011-07-01 false Equipment design. 792.61 Section 792... (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall...

  16. 46 CFR 108.701 - Sounding equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Sounding equipment. 108.701 Section 108.701 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.701 Sounding equipment. Each self-propelled unit must have...

  17. 46 CFR 108.701 - Sounding equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Sounding equipment. 108.701 Section 108.701 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.701 Sounding equipment. Each self-propelled unit must have...

  18. 14 CFR 23.1431 - Electronic equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electronic equipment. 23.1431 Section 23... Equipment § 23.1431 Electronic equipment. (a) In showing compliance with § 23.1309(b)(1) and (2) with respect to radio and electronic equipment and their installations, critical environmental conditions must...

  19. 14 CFR 25.1431 - Electronic equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electronic equipment. 25.1431 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Miscellaneous Equipment § 25.1431 Electronic equipment. (a) In showing compliance with § 25.1309 (a) and (b) with respect to radio and electronic...

  20. 14 CFR 25.1431 - Electronic equipment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Electronic equipment. 25.1431 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Miscellaneous Equipment § 25.1431 Electronic equipment. (a) In showing compliance with § 25.1309 (a) and (b) with respect to radio and electronic...

  1. 14 CFR 23.1431 - Electronic equipment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Electronic equipment. 23.1431 Section 23... Equipment § 23.1431 Electronic equipment. (a) In showing compliance with § 23.1309(b)(1) and (2) with respect to radio and electronic equipment and their installations, critical environmental conditions must...

  2. 29 CFR 785.24 - Principles noted in Portal-to-Portal Bulletin.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Principles noted in Portal-to-Portal Bulletin. 785.24... of Principles Preparatory and Concluding Activities § 785.24 Principles noted in Portal-to-Portal Bulletin. In November, 1947, the Administrator issued the Portal-to-Portal Bulletin (part 790 of...

  3. Applications of Professional Video Equipment in Medical Imaging

    NASA Astrophysics Data System (ADS)

    Kwong, Y. K.; Cvetko, J. F.; Sandau, J.

    1996-03-01

    The use of full-motion video technology in scientific applications is common. Yet, most researchers utilize remarkably simple technology, frequently intended for consumer applications. In many cases, this may be adequate. However, equipment budget issues aside, we find that this is often caused by a lack of familiarity with the state-of-the-art. From the world of broadcasters, production houses, and other professional users of video, there exists a wide range of equipment based on different industry standards. They provide storage, retrieval, and transport capabilities that add functionality and flexibility unavailable in lower-end equipment. We have developed an interactive video system, on which multiple high-resolution video sources may be recorded synchronously at a fixed frame rate of 30/s. The stored video can be forwarded over local- or wide-area networks and viewed on analog display monitors. Applications to bio-medical imaging systems will be emphasized here.

  4. Children's misadventures with golfing equipment.

    PubMed

    Fradkin, Andrea J; Cameron, Peter A; Gabbe, Belinda J

    2005-09-01

    The purpose of this study was to identify and describe injuries sustained by children less than 15 years of age associated with golfing equipment resulting in presentation to an emergency department. These findings can then be used to highlight potential injury prevention strategies. Retrospective analysis of data from the Victorian Emergency Minimum Dataset was performed. Golf-related injury cases were identified for the period April 1997 - December 2002. Cases where the text description of the injury event included the word "golf" were extracted for analysis. Text narratives of all cases were reviewed and cases occurring during golf play or practice or at a golf course were excluded from the analysis. There were 309 presentations to an emergency department for treatment of an injury caused by golfing equipment in children less than 15 years of age. The majority of presentations were male (71.5%) and children aged 5-9 years presented most commonly (53.1%). Head injuries were the most common reason for presentation (84.4%), with open wounds being the most common type of injury (68.5%). Being struck by an object (96.8%) was the most frequent cause of injury. Whilst relatively uncommon, golf equipment injuries to children could be prevented by attention to community safety and awareness of correct storage of golfing equipment. In addition, education of children regarding the safe handling and use of golf equipment could be useful. This could help reduce the number of emergency department visits and hospital admissions, thereby contributing to the reduction of costs associated with injury.

  5. Boundary issues

    NASA Astrophysics Data System (ADS)

    Townsend, Alan R.; Porder, Stephen

    2011-03-01

    A 2008 Transformation of the nitrogen cycle: Recent trends, questions, and potential solutions Science 320 889-92 Handoh I C and Lenton T M 2003 Periodic mid-Cretaceous oceanic anoxic events linked by oscillations of the phosphorus and oxygen biogeochemical cycles global Biogeochemical Cycles 17 1092 MacDonald G K, Bennett E M, Potter P A and Ramankutty N 2011 Agronomic phosphorus imbalances across the world_s croplands Proc. Natl Acad. Sci. 108 3086-91 Malthus T 1798 An Essay on the Principle of Population (available at http://www.gutenberg.org/browse/authors/m\\#a1411 Smil V 2000 Phosphorus in the environment: Natural flows and human interferences Annu. Rev. Energy Environ. 25 53-88 Rockström J et al 2009 A safe operating space for humanity Nature 461 472-5 Sanchez P A and Swaminathan M S 2005 Cutting world hunger in half Science 307 357-9 Schlesinger W H 2009 Planetary boundaries: Thresholds risk prolonged degradation Nature Reports Climate Change doi:10.1038/climate.2009.93 Smith V H and Schindler D W 2009 Eutrophication science: where do we go from here? Trends in Ecology and Evolution 24 201-7 Van Kauenbergh S J 2010 World Phosphate Rock Reserves and Resources (Muscle Shoals, AL: International Fertilizer Development Center) Vitousek P M, Naylor R, Crews T, David M B, Drinkwater L E, Holland E, Johnes P J, Katzenberger J, Martinelli L A, Matson P A, Nziguheba G, Ojima D, Palm C A, Robertson G P, Sanchez P A, Townsend A R, Zhang F S 2009 Nutrient Imbalances in Agricultural Development Science 324 1519-20

  6. A complete set of the special process equipment for the defect-free production of reticles

    NASA Astrophysics Data System (ADS)

    Avakaw, Syarhei; Iouditski, Valerian; Pushkin, Leanid; Tsitko, Alena

    2007-02-01

    The paper presents an integrated solution of a problem to develop a set of the equipment for the defect-free production of reticles and photomasks. The integrated approach to the equipment design allows to obtain certain advantages disclosed below. Accordingly, the paper highlights the following main issues: *Practical realization of these advantages in the special process equipment developed by the KBTEM-OMO enterprise of the PLANAR. *Advantages in the development of a complete set of the special process equipment; Without taking into account technical and chemical processes, this complete set includes three component parts: *Multi-beam laser pattern generator; *Die-to-Database reticle inspection system; *Laser reticle repair system.

  7. The application of a new type of hydraulic classification equipment: swirl continuous centrifugal separator

    NASA Astrophysics Data System (ADS)

    Xie, Haiyun; Liu, Rongxin; Li, Yuanhong; Zhang, Pengfei; Ding, Chao; Chen, Luzheng; Tong, Xiong

    2017-06-01

    Swirl Continuous centrifugal concentrator was based on principle of hydro cyclone and fluidized bed separation, which is new hydraulic grading equipment. The effect of new equipment on the classification of Panzhihua ilmenite was studied under different operating conditions. The results show that the underflow pressure, the overflow rate, the feed pressure and the recoil pressure have a significant effect on the grading effect of the cyclone centrifugal continuous concentrator. At the same time, the classification effect on the Titanium magnetite of this concentrator is significant. The new equipment is hopeful to be generalized and gradually used in practice of hydraulic classification.

  8. Laser Propulsion Standardization Issues

    SciTech Connect

    Scharring, Stefan; Eckel, Hans-Albert; Roeser, Hans-Peter; Sinko, John E.; Sasoh, Akihiro

    2010-10-08

    It is a relevant issue in the research on laser propulsion that experimental results are treated seriously and that meaningful scientific comparison is possible between groups using different equipment and measurement techniques. However, critical aspects of experimental measurements are sparsely addressed in the literature. In addition, few studies so far have the benefit of independent confirmation by other laser propulsion groups. In this paper, we recommend several approaches towards standardization of published laser propulsion experiments. Such standards are particularly important for the measurement of laser ablation pulse energy, laser spot area, imparted impulse or thrust, and mass removal during ablation. Related examples are presented from experiences of an actual scientific cooperation between NU and DLR. On the basis of a given standardization, researchers may better understand and contribute their findings more clearly in the future, and compare those findings confidently with those already published in the laser propulsion literature. Relevant ISO standards are analyzed, and revised formats are recommended for application to laser propulsion studies.

  9. Particulate technology issues

    SciTech Connect

    Pontius, D.H.; Vann Bush, P.

    1992-12-01

    Advanced systems for power generation based on coal combustion or gasification will require effective particulate control both for protection of equipment in the gas stream and for compliance with environmental regulations. These new classes of systems will require efficient removal of particles from gas streams at high temperature and high pressure. Primary candidates for particulate control are various types of ceramic filter systems; however, the long-term effects of hot gases and fine particles on the structure and filtration effectiveness of potential filter materials require further study. Thermal gradients induced by pulse cleaning are also of concern. Long-term ``patch tests`` will be conducted on ceramic disks of the same materials used in the fabrication of ceramic candles and ceramic crossflow filters. The primary issues to be addressed in these tests are the long-term physical, thermal, and chemical stability of the ceramic materials; long-term pressure drop and filtration characteristics of the ceramic filters; potential for irreversible blinding of filter elements; and long term performance and reliability of auxiliary hardware, such as the tube sheet and pulse cleaning systems. Each long-term patch test will require about 3 to 4 months of nearly continuous operation.

  10. Ergonomic and usability ratings of helmets and head-mounted personal protective equipment in industry.

    PubMed

    Godwin, Alison A; Eger, Tammy R

    2014-01-01

    Anecdotal evidence from industry suggests that those working as arborists prefer to use minimal brim style, climbing helmets rather than traditional forestry helmets. In the mining industry, workers prefer wireless, LED cap lamps. Workers cite better comfort, better ability to see their work and better ventilation as reasons to use those helmets and cap lamps. Safety personnel in the industry would like to base future helmet decisions and requirements on a complete understanding of the ergonomic and safety issues of all available head-borne equipment. Previous research has found that helmet design, head load and head/neck posture can influence the amount of neck discomfort experienced by users. Specific features of helmets and head-mounted personal protective equipment (PPE) in various industries have been changing to reflect ergonomic design principles. A series of three studies were conducted to evaluate usability and preference of new style cap lamps and helmet brims. PARTICIPANTS (n=10-16) were recruited primarily from undergraduate students, and each study represents a different group of novice participants. Two different courses that included a tunnel were used in the first two studies to evaluate cap lamp styles and wireless cap lamps, while a simulated arborist task was used in the final study to evaluate helmet brim. Measures of ergonomic and discomfort questionnaires were analysed for this paper. The first cap lamp study was able to conclude that LED lamps are preferred over incandescent lamps, while the second study demonstrated that users prefer a multi-directional beam, and adjustability features of the cap lamp. In the final study, participants who must perform extreme overhead tasks prefer a helmet with a minimal brim. Additional research is warranted to determine whether actual, industry workers demonstrate the same preferences for these PPE items.

  11. Principles of Glacier Mechanics

    NASA Astrophysics Data System (ADS)

    Waddington, Edwin D.

    Glaciers are awesome in size and move at a majestic pace, and they frequently occupy spectacular mountainous terrain. Naturally, many Earth scientists are attracted to glaciers. Some of us are even fortunate enough to make a career of studying glacier flow. Many others work on the large, flat polar ice sheets where there is no scenery. As a leader of one of the foremost research projects now studying the flow of mountain glaciers (Storglaciaren, Norway), Roger Hooke is well qualified to describe the principles of glacier mechanics. Principles of Glacier Mechanics is written for upper-level undergraduate students and graduate students with an interest in glaciers and the landforms that glaciers produce. While most of the examples in the text are drawn from valley glacier studies, much of the material is also relevant to “glacier flatland” on the polar ice sheets.

  12. Principles of Natural Photosynthesis.

    PubMed

    Krewald, Vera; Retegan, Marius; Pantazis, Dimitrios A

    2016-01-01

    Nature relies on a unique and intricate biochemical setup to achieve sunlight-driven water splitting. Combined experimental and computational efforts have produced significant insights into the structural and functional principles governing the operation of the water-oxidizing enzyme Photosystem II in general, and of the oxygen-evolving manganese-calcium cluster at its active site in particular. Here we review the most important aspects of biological water oxidation, emphasizing current knowledge on the organization of the enzyme, the geometric and electronic structure of the catalyst, and the role of calcium and chloride cofactors. The combination of recent experimental work on the identification of possible substrate sites with computational modeling have considerably limited the possible mechanistic pathways for the critical O-O bond formation step. Taken together, the key features and principles of natural photosynthesis may serve as inspiration for the design, development, and implementation of artificial systems.

  13. Diagnostic equipment outside the laboratory.

    PubMed Central

    Burrin, J M; Fyffe, J A

    1988-01-01

    A questionnaire was circulated to clinical biochemistry laboratories in the North West Thames region of the United Kingdom requesting information on extralaboratory equipment. Data on the types and numbers of instruments in use, their relationship with the laboratory, and quality assurance procedures were obtained. Laboratories were prepared to maintain equipment over which they had no responsibility for purchase, training of users, or use. The quality assurance of these instruments gave even greater cause for concern. Although internal quality control procedures were performed on many of the instruments, laboratories were involved in only a minority of these procedures. Quality control procedures and training of users were undertaken on site in less than 50% of blood gas analysers and bilirubin meters and in less than 25% of glucose meters. External quality assessment procedures were non-existent for all of the instruments in use with the exception of glucose stick meters in two laboratories. PMID:3192750

  14. Ethical issues and Huntington's disease.

    PubMed

    Kromberg, Jennifer G R; Wessels, Tina-Marié

    2013-10-11

    The practice of genetic counselling gives rise to many ethical dilemmas, and counsellors need to be familiar with the principles of biomedical ethics. The primary principles include respect for autonomy, beneficence, non-maleficence and justice. A case of identical twins at 50% risk for Huntington's disease, in which only one twin sought predictive testing for this dominantly inherited disease, created several ethical dilemmas. Another case where predictive testing was carried out on two young children, at high risk, by a laboratory at the request of an adoption agency and a doctor, with a view to giving information to the foster parents, also posed many ethical conundrums for the counsellor. The ethical issues that arose in these cases are discussed in this paper. 

  15. Ethical issues in medical malpractice.

    PubMed

    Solomon, Robert C

    2006-08-01

    The interrelationships between biomedical ethics and the law are perhaps nowhere as starkly apparent as in the realm of medical malpractice. Although ethical and legal conduct and practices are often in harmony, in many areas ethical principles and the issues surrounding medical liability appear to come into conflict. Disclosure of errors; quality improvement activities; the practice of defensive medicine; dealing with patients who wish to leave against medical advice; provision of futile care at the insistence of patients or families; and the various protections of Good Samaritan laws are just a few of these. In addition, the ethical principles governing the conduct of physicians serving as expert witnesses in medical malpractice cases have become a subject of intense interest in recent years.

  16. IFR fuel cycle process equipment design environment and objectives

    SciTech Connect

    Rigg, R.H.

    1993-03-01

    Argonne National laboratory (ANL) is refurbishing the hot cell facility originally constructed with the EBR-II reactor. When refurbishment is complete, the facility win demonstrate the complete fuel cycle for current generation high burnup metallic fuel elements. These are sodium bonded, stainless steel clad fuel pins of U-Zr or U-Pu-Zr composition typical of the fuel type proposed for a future Integral Fast Reactor (IFR) design. To the extent possible, the process equipment is being built at full commercial scale, and the facility is being modified to incorporate current DOE facility design requirements and modem remote maintenance principles. The current regulatory and safety environment has affected the design of the fuel fabrication equipment, most of which will be described in greater detail in subsequent papers in this session.

  17. IFR fuel cycle process equipment design environment and objectives

    SciTech Connect

    Rigg, R.H.

    1993-01-01

    Argonne National laboratory (ANL) is refurbishing the hot cell facility originally constructed with the EBR-II reactor. When refurbishment is complete, the facility win demonstrate the complete fuel cycle for current generation high burnup metallic fuel elements. These are sodium bonded, stainless steel clad fuel pins of U-Zr or U-Pu-Zr composition typical of the fuel type proposed for a future Integral Fast Reactor (IFR) design. To the extent possible, the process equipment is being built at full commercial scale, and the facility is being modified to incorporate current DOE facility design requirements and modem remote maintenance principles. The current regulatory and safety environment has affected the design of the fuel fabrication equipment, most of which will be described in greater detail in subsequent papers in this session.

  18. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    SciTech Connect

    Not Available

    1994-07-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  19. Power Product Equipment Technician: Lawn and Garden Equipment. Teacher Edition. Student Version.

    ERIC Educational Resources Information Center

    Hilley, Robert

    This packet contains teacher and student editions for lawn and garden equipment repair and maintenance, intended for the preparation of power product equipment technicians. This publication contains four units: (1) introduction to lawn and garden equipment; (2) light-duty lawn and garden equipment; (3) heavy-duty lawn and garden equipment; and (4)…

  20. Pauli Exclusion Principle

    NASA Astrophysics Data System (ADS)

    Murdin, P.

    2000-11-01

    A principle of quantum theory, devised in 1925 by Wolfgang Pauli (1900-58), which states that no two fermions may exist in the same quantum state. The quantum state of a particle is defined by a set of numbers that describe quantities such as energy, angular momentum and spin. Fermions are particles such as quarks, protons, neutrons and electrons, that have spin = ½ (in units of h/2π, where h is ...