Sample records for equipment technology program

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION COATINGS AND COATING EQUIPMENT PROGRAM (ETV CCEP) HIGH TRANSFER EFFICIENCE SPRAY EQUIPMENT--GENERIC VERIFICATION PROTOCOL

    EPA Science Inventory

    The Environmental Technology Verification (ETV) Program has been established to verify the performance characteristics of innovative environmental technologies and report this objective information, thus, accelerating the entrance of these new technologies into the marketplace. V...

  2. Beyond "Classroom" Technology: The Equipment Circulation Program at Rasmuson Library, University of Alaska Fairbanks

    ERIC Educational Resources Information Center

    Jensen, Karen

    2008-01-01

    The library at the University of Alaska Fairbanks offers a unique equipment lending program through its Circulation Desk. The program features a wide array of equipment types, generous circulation policies, and unrestricted borrowing, enabling students, staff, and faculty to experiment with the latest in audio, video, and computer technologies,…

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION COATINGS AND COATING EQUIPMENT PROGRAM (ETV CCEP), FINAL TECHNOLOGY APPLICATIONS GROUP TAGNITE--TESTING AND QUALITY ASSURANCE PLAN (T/QAP)

    EPA Science Inventory

    The overall objective of the Environmental Testing and Verification Coatings and Coating Equipment Program is to verify pollution prevention and performance characteristics of coating technologies and make the results of the testing available to prospective coating technology use...

  4. Environmental Technology Verification Coatings and Coating Equipment Program (ETV CCEP) High Transfer Efficiency Spray Equipment--Generic Verification Protocol

    EPA Science Inventory

    The Environmental Technology Verification (ETV) Program has been established by the U.S. Environmental Protection Agency (EPA) to verify the performance characteristics of innovative environmental technologies across all media and report this objective information to the states, ...

  5. 76 FR 40285 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-08

    ..., data, and information regarding the proposed determination for set-top boxes and network equipment... encryption. Postal Mail: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Program... Energy, Building Technologies Program, 950 L'Enfant Plaza, SW., 6th Floor, Washington, DC 20024. Please...

  6. Laboratory Resources Management in Manufacturing Systems Programs

    ERIC Educational Resources Information Center

    Obi, Samuel C.

    2004-01-01

    Most, if not all, industrial technology (IT) programs have laboratories or workshops. Often equipped with modern equipment, tools, materials, and measurement and test instruments, these facilities constitute a major investment for IT programs. Improper use or over use of program facilities may result in dirty lab equipment, lost or damaged tools,…

  7. Mississippi Curriculum Framework for Diesel Equipment Technology (CIP: 47.0605--Diesel Engine Mechanic & Repairer). Postsecondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the diesel equipment technology programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies,…

  8. Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

    NASA Technical Reports Server (NTRS)

    Nanzetta, Philip

    1992-01-01

    The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

  9. 78 FR 24428 - P25 Compliance Assessment Program for Communications Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-25

    ... Communications Equipment AGENCY: Science and Technology Directorate, Department of Homeland Security. ACTION... for ensuring that communications equipment that is declared by the manufacturer to be P25 compliant in... developed by DHS and the National Institute of Standards and Technology (NIST) to identify equipment that...

  10. About the Drift Reduction Technology Program

    EPA Pesticide Factsheets

    The new voluntary Drift Reduction Technology (DRT) Program will encourage the manufacture, marketing, and use of safer spray technology and equipment scientifically verified to reduce pesticide drift.

  11. Future payload technology requirements study

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Technology advances needed for an overall mission model standpoint as well as those for individual shuttle payloads are defined. The technology advances relate to the mission scientific equipment, spacecraft subsystems that functionally support this equipment, and other payload-related equipment, software, and environment necessary to meet broad program objectives. In the interest of obtaining commonality of requirements, the study was structured according to technology categories rather than in terms of individual payloads.

  12. Satellite services system analysis study. Volume 5: Programmatics

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The overall program and resources needed for development and operation of a Satellite Services System is reviewed. Program requirements covered system operations through 1993 and were completed in preliminary form. Program requirements were refined based on equipment preliminary design and analysis. Schedules, costs, equipment utilization, and facility/advanced technology requirements were included in the update. Equipment user charges were developed for each piece of equipment and for representative satellite servicing missions.

  13. Efficiency improvements in US Office equipment: Expected policy impacts and uncertainties

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Koomey, J.G.; Cramer, M.; Piette, M.A.

    This report describes a detailed end-use forecast of office equipment energy use for the US commercial sector. We explore the likely impacts of the US Environmental Protection Agency`s ENERGY STAR office equipment program and the potential impacts of advanced technologies. The ENERGY STAR program encourages manufacturers to voluntarily incorporate power saving features into personal computers, monitors, printers, copiers, and fax machines in exchange for allowing manufacturers to use the EPA ENERGY STAR logo in their advertising campaigns. The Advanced technology case assumes that the most energy efficient current technologies are implemented regardless of cost.

  14. TRICARE program; clarification of benefit coverage of durable equipment and ordering or prescribing durable equipment; clarification of benefit coverage of assistive technology devises under the Extended Care Health Option Program. Final rule.

    PubMed

    2014-12-31

    This final rule modifies the TRICARE regulation to add a definition of assistive technology (AT) devices for purposes of benefit coverage under the TRICARE Extended Care Health Option (ECHO) Program and to amend the definitions of durable equipment (DE) and durable medical equipment (DME) to better conform the language in the regulation to the statute. The final rule amends the language that specifically limits ordering or prescribing of DME to only a physician under the Basic Program, as this amendment will allow certain other TRICARE authorized individual professional providers, acting within the scope of their licensure, to order or prescribe DME. This final rule also incorporates a policy clarification relating to luxury, deluxe, or immaterial features of equipment or devices. That is, TRICARE cannot reimburse for the luxury, deluxe, or immaterial features of equipment or devices, but can reimburse for the base or basic equipment or device that meet the beneficiary's needs. Beneficiaries may choose to pay the provider for the luxury, deluxe, or immaterial features if they desire their equipment or device to have these "extra features."

  15. THE ETV P2 INNOVATIVE COATINGS AND COATING EQUIPMENT PROGRAM--AN UPDATE

    EPA Science Inventory

    The paper focuses on the Pollution Prevention (P2), Recycling, and Waste Treatment Systems Center of the EPA's Environmental Technology Verification (ETV) Program and, specifically, the P2 Innovating Coatings and Coating Equipment Program (CCEP) housed within the Center. The focu...

  16. Medical technology advances from space research

    NASA Technical Reports Server (NTRS)

    Pool, S. L.

    1972-01-01

    Details of medical research and development programs, particularly an integrated medical laboratory, as derived from space technology are given. The program covers digital biotelemetry systems, automatic visual field mapping equipment, sponge electrode caps for clinical electroencephalograms, and advanced respiratory analysis equipment. The possibility of using the medical laboratory in ground based remote areas and regional health care facilities, as well as long duration space missions is discussed.

  17. National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

    ERIC Educational Resources Information Center

    Heidari, Farzin

    The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

  18. Equipping the 2015 Chemical Technology Workforce: Partnering with Key Stakeholders

    ERIC Educational Resources Information Center

    Aronson, Blake; Wesemann, Jodi

    2007-01-01

    The opportunities and challenges associated with establishing and sustaining successful chemistry-based technology programs were discussed at Equipping the 2015 Chemical Technology Workforce, a Presidential Event held at the Fall 2006 ACS National Meeting, kicking off an initiative by the same name. The initiative is based on the recent ACS…

  19. Medical technology management: from planning to application.

    PubMed

    David, Y; Jahnke, E

    2005-01-01

    Appropriate deployment of technological innovation contributes to improvement in the quality of healthcare delivered, the containment of cost, and access to the healthcare system. Hospitals have been allocating a significant portion of their resources to procuring and managing capital assets; they are continuously faced with demands for new medical equipment and are asked to manage existing inventory for which they are not well prepared. To objectively manage their investment, hospitals are developing medical technology management programs that need pertinent information and planning methodology for integrating new equipment into existing operations as well as for optimizing costs of ownership of all equipment. Clinical engineers can identify technological solutions based on the matching of new medical equipment with hospital's objectives. They can review their institution's overall technological position, determine strengths and weaknesses, develop equipment-selection criteria, supervise installations, train users and monitor post procurement performance to assure meeting of goals. This program, together with cost accounting analysis, will objectively guide the capital assets decision-making process. Cost accounting analysis is a multivariate function that includes determining the amount, based upon a strategic plan and financial resources, of funding to be allocated annually for medical equipment acquisition and replacement. Often this function works closely with clinical engineering to establish equipment useful life and prioritization of acquisition, upgrade, and replacement of inventory within budget confines and without conducting time consuming, individual financial capital project evaluations.

  20. Our Plan for a Wireless Loan Service.

    ERIC Educational Resources Information Center

    Allmang, Nancy

    2003-01-01

    Discusses the planning for wireless technology at the research library of the National Institute of Standards and Technology (NIST). Highlights include computer equipment, including laptops and PDAs; local area networks; equipment loan service; writing a business plan; infrastructure; training programs; and future considerations, including…

  1. 32 CFR 241.13 - Implementation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... Information technology (IT) as defined means use of computers, ancillary equipment (including imaging... PILOT PROGRAM FOR TEMPORARY EXCHANGE OF INFORMATION TECHNOLOGY PERSONNEL (EFF. UNTIL 7-20-2012) § 241.13... Program for the Temporary Exchange of Information Personnel, referred to as the Information Technology...

  2. Suggestions for Maintaining Educational Technology Programs in Hard-Pressed Areas.

    ERIC Educational Resources Information Center

    Greene, John W.

    1984-01-01

    Discusses personnel development and inexpensive sources of equipment needed for successful educational technology programs in economically hard-pressed areas in the United States and in Third World countries. Surveys future technological trends and stresses need for planning and foresight. (CJM)

  3. Industrial Technology Modernization Program. Project 32. Factory Vision. Phase 2

    DTIC Science & Technology

    1988-04-01

    instructions for the PWA’s, generating the numerical control (NC) program instructions for factory assembly equipment, controlling the process... generating the numerical control (NC) program instructions for factory assembly equipment, controlling the production process instructions and NC... Assembly Operations the "Create Production Process Program" will automatically generate a sequence of graphics pages (in paper mode), or graphics screens

  4. Defense Science Board Task Force on The Manufacturing Technology Program: A Key to Affordably Equipping the Future Force

    DTIC Science & Technology

    2006-02-01

    technology for cost and risk reduction of products, software, and processes; long-term, multi-Service needs; and disruptive technologies , both...initiatives and for disruptive technologies , the Office of the Secretary of Defense (OSD) can better promote the importance and value of the program...multi- Service programs, research in “ disruptive ” technologies , and SBIR programs. Balance current, near term, and future needs as well as small and

  5. 76 FR 67287 - Alternative Fuel Transportation Program; Alternative Fueled Vehicle Credit Program (Subpart F...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-31

    ... infrastructure, nonroad equipment, and emerging technologies related to those electric drive vehicles. As... for investment in an emerging technology relating to any'' of the enumerated electric drive vehicles... Fuel Transportation Program (AFTP or Program), by including EISA-specified electric drive vehicles and...

  6. Agricultural Equipment Technology: A Suggested 2-Year Post High School Curriculum.

    ERIC Educational Resources Information Center

    Office of Education (DHEW), Washington, DC.

    Developed by a subject matter specialist, this suggested curriculum guide is intended to assist school administrators, advisory committees, supervisors, and teachers in planning and developing new programs or evaluating existing ones in agricultural equipment technology. The guide provides suggested course outlines, including examples of texts and…

  7. Technology Refresh Program Launches Phase II | Poster

    Cancer.gov

    The Technology Refresh Program (TRP) is an NCI-funded initiative designed to promote efficient spending on computer equipment by providing staff members with access to the latest technology to meet their computing needs, said Kyle Miller, IT coordinator, Computer and Statistical Services (C&SS), NCI at Frederick.

  8. A Laser Technology Program Does Not Start with the Speed of Light.

    ERIC Educational Resources Information Center

    Gebert, John H.

    1982-01-01

    Describes the personnel, equipment, and facilities problems encountered by North Central Technical Institute in the development of a laser technician program, and the program's enrollment and job placement rates. Advocates financial support for such programs to meet the national demand for laser and other high technology personnel. (WL)

  9. US Department of Energy's Efforts in Intelligent Processing Equipment

    NASA Technical Reports Server (NTRS)

    Peavy, Richard D.; Mcfarland, Janet C.

    1992-01-01

    The Department of Energy (DOE) uses intelligent processing equipment (IPE) technologies to conduct research and development and manufacturing for energy and nuclear weapons programs. This paper highlights several significant IPE efforts underway in DOE. IPE technologies are essential to the accomplishment of DOE's missions, because of the need for small lot production, precision, and accuracy in manufacturing, hazardous waste management, and protection of the environment and the safety and health of the workforce and public. Applications of IPE technologies include environmental remediation and waste handling, advanced manufacturing, and automation of tasks carried out in hazardous areas. DOE laboratories have several key programs that integrate robotics, sensor, and control technologies. These programs embody a considerable technical capability that also may be used to enhance U.S. industrial competitiveness. DOE encourages closer cooperation with U.S. industrial partners based on mutual benefits. This paper briefly describes technology transfer mechanisms available for industrial involvement.

  10. The central equipment pool, an opportunity for improved technology management.

    PubMed

    Gentles, W M

    2000-01-01

    A model for a central equipment pool managed by a clinical engineering department has been presented. The advantages to patient care and to the clinical engineering department are many. The distribution of portable technology that has been traditionally managed by the materials management function is a logical match to the expanding role of clinical engineering departments in technology management. Accurate asset management tools have allowed us to provide reliable measures of infusion pump utilization, permitting us to predict future needs as programs expand. Thus we are more actively involved in strategic technology planning. The central equipment pool is an excellent opportunity for the clinical engineering department to increase its technology management activities.

  11. Research and Development Opportunities for Joining Technologies in HVAC&R

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goetzler, William; Guernsey, Matt; Young, Jim

    The Building Technologies Office (BTO) works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption and greenhouse gas (GHG) emissions in residential and commercial buildings. This opportunity assessment aims to advance BTO’s energy savings, GHG reduction, and other program goals by identifying research and development (R&D) initiatives for joining technologies in heating, ventilation, air-conditioning, and refrigeration (HVAC&R) systems. Improving joining technologies for HVAC&R equipment has the potential to increase lifetime equipment operating efficiency, decrease equipment and project cost, and most importantly reduce hydroflourocarbon (HFC) refrigerant leakage to support HFC phasedown and GHG reductionmore » goals.« less

  12. Medical technology advances from space research.

    NASA Technical Reports Server (NTRS)

    Pool, S. L.

    1971-01-01

    NASA-sponsored medical R & D programs for space applications are reviewed with particular attention to the benefits of these programs to earthbound medical services and to the general public. Notable among the results of these NASA programs is an integrated medical laboratory equipped with numerous advanced systems such as digital biotelemetry and automatic visual field mapping systems, sponge electrode caps for electroencephalograms, and sophisticated respiratory analysis equipment.

  13. Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ternes, MP

    A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use ofmore » the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.« less

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: EXEL INDUSTRIAL AIRMIX SPRAY GUN

    EPA Science Inventory

    The Environmental Technology Verification Program has partnered with Concurrent Technologies Corp. to verify innovative coatings and coating equipment technologies for reducing air emissions. This report describes the performance of EXEL Industrial's Kremlin Airmix high transfer ...

  15. 78 FR 26711 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-08

    ... Energy. ACTION: Notice of extension of public comment period. SUMMARY: On April 8, 2013, the U.S..., U.S. Department of Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue..., U.S. Department of Energy, Building Technologies Program, 950 L'Enfant Plaza, SW., Suite 600...

  16. 75 FR 13114 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... capacity ECO-i (commercial) multi- split heat pumps. Through this document, DOE: (1) Solicits comments.... Brenda Edwards, U.S. Department of Energy, Building Technologies Program, Mailstop EE-2J/1000... Technologies Program, 950 L'Enfant Plaza, SW., Suite 600, Washington, DC 20024. Please submit one signed...

  17. Elementary Technology Demonstration Schools: The Third Year 1992-93. Publication Number 92.31.

    ERIC Educational Resources Information Center

    Sabatino, Melissa

    The 1992-93 school year was the third year of the Elementary Technology Demonstration Schools program of the Austin (Texas) schools; the project is funded by International Business Machines Corporation (IBM) and Apple Computer Inc. Grants from these corporations were used to equip three elementary schools with IBM equipment and one with Apple…

  18. Department of the Air Force Supporting Data for Fiscal Year 1993 Budget Estimates Submitted to Congress January 1992 Descriptive Summaries. Research, Development, Test and Evaluation

    DTIC Science & Technology

    1992-01-01

    Spacecraft Technology 0503401F 450 35 Space Systems Environmental Interactions Technology 060341 OF 468 36 Space Subsystems Technology 0603428F 472 37...Space Systems Environmental Interactions Technology 35 468 0603402F Space Test Program (STP) 191 462 030591OF SPACETRACK 85 195 0604233F Specialized...is in the mid- 1990’s. Combat force commanders and units (equipped with EMP-hardened, secure radio equipment) interact with nearby relay nodes for

  19. 78 FR 49524 - National Institute for Occupational Safety and Health Personal Protective Technology Program and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-14

    ... Non-Respiratory Personal Protective Equipment (PPE).'' To view the notice and related materials, visit... processes, to address conformity assessment of non-respiratory personal protective equipment. Conformity...

  20. 42 CFR 495.302 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements... thereof by the State agency. Acquisition means to acquire health information technology (HIT) equipment or... technology; (2) Install or commence utilization of certified EHR technology capable of meeting meaningful use...

  1. Industrial Technology Modernization Program. Project 28. Automation of Receiving, Receiving Inspection and Stores

    DTIC Science & Technology

    1987-06-15

    001 GENERAL DYNAMICS 00 FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Repc t JUNG 0 ?7 PROJECT 28 AUTOMATION...DYNAMICS FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Report PROJECT 28 AUTOMATION OF RECEIVING, RECEIVING...13 6 PROJECT ASSUMPTIONS 20 7 PRELIMINARY/FINAL DESIGN AND FINDINGS 21 8 SYSTEM/EQUIPMENT/MACHINING SPECIFICATIONS 37 9 VENDOR/ INDUSTRY ANALYSIS

  2. 30 CFR 250.1913 - What criteria for operating procedures must my SEMS program meet?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... precautions must include control technology, personal protective equipment, and measures to be taken if...) Bypassing and flagging out-of-service equipment; (7) Safety and environmental consequences of deviating from your equipment operating limits and steps required to correct or avoid this deviation; (8) Properties...

  3. Use of Videorecording Equipment as an Educational Tool.

    ERIC Educational Resources Information Center

    Webster, Harold J.

    The faculty at the DuBois Campus of the Pennsylvania State University are using video recording equipment in a variety of ways. Student performances are videotaped for different purposes in speech, marketing, and physical education classes. Professors in the Wildlife Technology Program are using portable videotaping equipment to record activities…

  4. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, CLEAN ENVIRONMENT EQUIPMENT, SAMPLEASE BLADDER PUMP

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

  5. Technology assessment and requirements analysis: a process to facilitate decision making in picture archiving and communications system implementation.

    PubMed

    Radvany, M G; Chacko, A K; Richardson, R R; Grazdan, G W

    1999-05-01

    In a time of decreasing resources, managers need a tool to manage their resources effectively, support clinical requirements, and replace aging equipment in order to ensure adequate clinical care. To do this successfully, one must be able to perform technology assessment and capital equipment asset management. The lack of a commercial system that adequately performed technology needs assessment and addressed the unique needs of the military led to the development of an in-house Technology Assessment and Requirements Analysis (TARA) program. The TARA is a tool that provides an unbiased review of clinical operations and the resulting capital equipment requirements for military hospitals. The TARA report allows for the development of acquisition strategies for new equipment, enhances personnel management, and improves and streamlines clinical operations and processes.

  6. Training Students as Technology Assistants.

    ERIC Educational Resources Information Center

    Onishi, Esther; Peto, Erica

    1996-01-01

    Describes a program where fifth and sixth graders are trained as school technology assistants. The childrens' duties include installation of software, making minor repairs, cleaning computer equipment, and assisting teachers and students. Outlines components of the program, lists forms the assistants use and skills they are taught, and provides…

  7. DEVELOPMENT AND EVALUATION OF EDUCATIONAL PROGRAMS IN BIO-MEDICAL EQUIPMENT TECHNOLOGY, PHASE I. FINAL REPORT.

    ERIC Educational Resources Information Center

    Technical Education Research Center, Cambridge, MA.

    OFFICIALS OF A REPRESENTATIVE SAMPLE OF HOSPITALS, BIOMEDICAL EQUIPMENT MANUFACTURERS, AND MEDICAL RESEARCH INSTITUTES IN NEW ENGLAND AND THREE MIDDLE ATLANTIC STATES WERE INTERVIEWED TO DETERMINE THE NEED FOR TECHNICIANS TO SERVICE AND MAINTAIN EQUIPMENT FOUND IN HOSPITALS AND BIOMEDICAL RESEARCH INSTITUTIONS. RESPONSES INDICATED A NEED FOR…

  8. A Failing Grade for WEEE Take-Back Programs for Information Technology Equipment

    ERIC Educational Resources Information Center

    Nakajima, Nina; Vanderburg, Willem H.

    2005-01-01

    Product take-back (also called extended producer responsibility) has become a trend for dealing with the garbage resulting from categories of problematic products. Waste electrical and electronic equipment (WEEE) is one such category with computer equipment being of particular significance. This article provides a description of the European…

  9. Industrial Technology Modernization Program. Project 44. Modernize Facility Equipment and Processes. Volume 2. Revision 2. Phase 2

    DTIC Science & Technology

    1988-05-01

    not be implemented. A change in foreign exchange rates (which increase the equipment cost) and a reduction in marketing forecast resulted in an...project will not be implemented due to unfavorable changes in foreign exchange rates (which increase the equipment costs) and a reduction in market

  10. Software Analytical Instrument for Assessment of the Process of Casting Slabs

    NASA Astrophysics Data System (ADS)

    Franěk, Zdeněk; Kavička, František; Štětina, Josef; Masarik, Miloš

    2010-06-01

    The paper describes the original proposal of ways of solution and function of the program equipment for assessment of the process of casting slabs. The program system LITIOS was developed and implemented in EVRAZ Vitkovice Steel Ostrava on the equipment of continuous casting of steel (further only ECC). This program system works on the data warehouse of technological parameters of casting and quality parameters of slabs. It enables an ECC technologist to analyze the course of casting melt and with using statistics methods to set the influence of single technological parameters on the duality of final slabs. The system also enables long term monitoring and optimization of the production.

  11. 46 CFR 162.060-5 - Incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems § 162.060-5 Incorporation by...), Environmental Technology Verification Program, National Risk Management Research Laboratory Office of Research...

  12. 42 CFR 495.302 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... technology per the ONC EHR certification criteria. Children's hospital means a separately certified children... AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements... thereof by the State agency. Acquisition means to acquire health information technology (HIT) equipment or...

  13. 42 CFR 495.302 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... technology per the ONC EHR certification criteria. Children's hospital means a separately certified children... AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements... thereof by the State agency. Acquisition means to acquire health information technology (HIT) equipment or...

  14. Technology Demonstration Summary, Chemfix Solidification/Stabilization Process, Clackamas, Oregon

    EPA Science Inventory

    ChemfIx's* patented stabilization/solidification technology was demonstrated at the Portable Equipment Salvage Company (PESC) site in Clackamas, Oregon, as part of the Superfund Innovative Technology Evaluation (SITE) program. The Chemfix process is designed to solidify and sta...

  15. Civilian First Responder Decontamination Equipment Characteristics Survey Results

    DTIC Science & Technology

    2010-01-01

    EQUIPMENT CHARACTERISTICS SURVEY RESULTS Scott Kooistra Shawn Bowen John Walther PROGRAM INTEGRATION DIRECTORATE Michael B. DeZearn ENGINEERING...COVERED (From - To) Mar 2007-Feb 2008 4. TITLE AND SUBTITLE Civilian First Responder Decontamination Equipment Characteristics Survey Results 5a...Department of Homeland Security/National Institute of Standards and Technology (DHS/NIST) Standards Development Team to develop a survey to

  16. You can't eat moon rocks. [aerospace technology spinoffs assessment

    NASA Technical Reports Server (NTRS)

    Kubokawa, C. C.

    1976-01-01

    The effects produced by the aerospace program are investigated. The technology developed from aerospace-related research, development, and manufacturing has been made available to the public for its use through the NASA Technology Utilization Program. A description is presented of 'spinoffs' of NASA's aerospace programs which are used on a daily basis by the public. Attention is given to the liquid cooled garment technology, meal systems for the elderly, the zinc-rich coating, the emergency blanket, the flexible urethane foam Temper Foam, the 'Fog-Away Coating', and composite graphite equipment.

  17. An Experimental Comparison of Two Methods Of Teaching Numerical Control Manual Programming Concepts; Visual Media Versus Hands-On Equipment.

    ERIC Educational Resources Information Center

    Biekert, Russell

    Accompanying the rapid changes in technology has been a greater dependence on automation and numerical control, which has resulted in the need to find ways of preparing programers for industrial machines using numerical control. To compare the hands-on equipment method and a visual media method of teaching numerical control, an experimental and a…

  18. Student Perceptions of Educational Quality in Radiologic Technology Programs: A Comparative Analysis of Specialized and Institutional Accreditation

    ERIC Educational Resources Information Center

    Vander Hoek, Nancy

    2012-01-01

    The purpose of this study was to determine if students' perceptions of quality differed between Joint Review Committee on Education in Radiologic Technology (JRCERT) accredited and non JRCERT-accredited radiography programs using the quality dimensions of curriculum, faculty, facilities and equipment, integrity, student outcomes, and overall…

  19. Pollution reduction technologies being applied to small coal-fired boiler systems in Poland

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Markussen, J.M.; Gyorke, D.F.

    1997-12-31

    To help in alleviating air pollution problems in Poland, various US environmental technologies are being installed in the city of Krakow to reduce emissions from short-stack coal- and coke-fired boilers. Introduction of low-cost, effective US pollution abatement and energy efficiency technologies is being completed through the US-Polish Krakow Clean Fossil Fuels and Energy Efficiency Program. Seven US firms are currently participating in the program; five projects are well under way and two are in the design phase. The technologies being applied in Krakow include modern district heating equipment and controls, coal preparation techniques, micronized coal combustion, automatic combustion controls, andmore » high-efficiency particulate control equipment. These technologies will be discussed along with pollutant reduction results obtained to date. Applications of these technologies are providing some efficient and economical answers to Krakow`s severe air pollution problems. Certainly, these technologies could be equally effective in many industrial cities throughout the world with similar air pollution concerns.« less

  20. Aligning Digital Video Technology with Game Pedagogy in Physical Education

    ERIC Educational Resources Information Center

    Koekoek, Jeroen; van der Mars, Hans; van der Kamp, John; Walinga, Wytse; van Hilvoorde, Ivo

    2018-01-01

    The rapid development of digital technology has expanded the prospects and promises for its application in physical education programs. Physical educators are becoming increasingly interested in technology but often remain inadequately equipped to effectively integrate these technological resources in their daily practice, and/or lack the…

  1. Energy Efficiency and Renewable Energy Program. Bibliography, 1993 edition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vaughan, K.H.

    1993-06-01

    The Bibliography contains listings of publicly available reports, journal articles, and published conference papers sponsored by the DOE Office of Energy Efficiency and Renewable Energy and published between 1987 and mid-1993. The topics of Bibliography include: analysis and evaluation; building equipment research; building thermal envelope systems and materials; district heating; residential and commercial conservation program; weatherization assistance program; existing buildings research program; ceramic technology project; alternative fuels and propulsion technology; microemulsion fuels; industrial chemical heat pumps; materials for advanced industrial heat exchangers; advanced industrial materials; tribology; energy-related inventions program; electric energy systems; superconducting technology program for electric energy systems; thermalmore » energy storage; biofuels feedstock development; biotechnology; continuous chromatography in multicomponent separations; sensors for electrolytic cells; hydropower environmental mitigation; environmental control technology; continuous fiber ceramic composite technology.« less

  2. Technology demonstration of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles at Ft. Bliss, Texas. Interim report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alvarez, R.A.; Yost, D.M.

    1995-11-01

    A technology demonstration program of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles was conducted at FL Bliss, Texas to demonstrate the use of CNG as an alternative fuel. The demonstration program at FL Bliss was the first Army initiative with CNG-fueled vehicles under the legislated Alternative Motor Fuels Act. This Department of Energy (DOE)-supported fleet demonstration consisted of 48 General Services Administration (GSA)-owned, Army-leased 1992 dedicated CNG General Motors (GM) 3/4-ton pickup trucks and four 1993 gasoline-powered Chevrolet 3/4-ton pickup trucks.

  3. The NASA Firefighter's Breathing System Program: A Status Report

    NASA Technical Reports Server (NTRS)

    McLaughlan, Pat B.

    1973-01-01

    The National Aeronautics and Space Administration (NASA), through its Technology Utilization Program, has been making its advanced technology developments available to the public. This has coincided in recent years with a growing demand within the fire service for improved protective equipment. A better breathing system for firefighters was one of the more immediate needs identified by the firefighting organizations. The Johnson Space Center (JSC), based upon their experience in providing life support systems for space flight, was subsequently requested to determine the feasibility of providing an improved breathing system for firefighters. Such a system was determined to be well within the current state of the art, and the Center is well into a development program to provide design verification of this improved protective' equipment. This report - outlines the overall objectives of this program, progress to date, and future planned activities.

  4. THE SITE DEMONSTRATION OF CHEMFIX SOLIDIFICATION/ STABILIZATION PROCESS AT THE PORTABLE EQUIPMENT SALVAGE COMPANY SITE

    EPA Science Inventory

    A demonstration of the GHEMFIX solidification/stabilization process was conducted under the United States Environmental Protection Agency`s (EPA) Superfund Innovative Technology Evaluation (SITE) program. The demonstration was conducted in March 1989, at the Portable Equipment Sa...

  5. Project A+, Elementary Technology Demonstration Schools, 1991-92: The Second Year.

    ERIC Educational Resources Information Center

    Nichols, Todd; Frazer, Linda

    The Elementary Technology Demonstration Schools program, where four elementary schools were equipped with computer hardware and software, was made possible by grants from IBM and Apple, Inc. The goals of the program were, in 3 years, to reduce by 50% the number of students not in their age appropriate grade level and those students not achieving…

  6. Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

    ERIC Educational Resources Information Center

    Schoolcraft Coll., Livonia, MI.

    This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

  7. Autonomous landing guidance program

    NASA Astrophysics Data System (ADS)

    Brown, John A.

    1996-05-01

    The Autonomous Landing Guidance program is partly funded by the US Government under the Technology Reinvestment Project. The program consortium consists of avionics and other equipment vendors, airlines and the USAF. A Sextant Avionique HUD is used to present flight symbology in cursive form as well as millimeter wave radar imagery from Lear Astronics equipment and FLIR Systems dual-channel, forward-looking, infrared imagery. All sensor imagery is presented in raster form. A future aim is to fuse all imagery data into a single presentation. Sensor testing has been accomplished in a Cessna 402 operated by the Maryland Advanced Development Laboratory. Development testing is under way in a Northwest Airlines simulator equipped with HUD and image simulation. Testing is also being carried out using United Airlines Boeing 727 and USAF C-135C (Boeing 707) test aircraft. The paper addresses the technology utilized in sensory and display systems as well as modifications made to accommodate the elements in the aircraft. Additions to the system test aircraft include global positioning systems, inertial navigation systems and extensive data collection equipment. Operational philosophy and benefits for both civil and military users are apparent. Approach procedures have been developed allowing use of Category 1 ground installations in Category 3 conditions.

  8. Southwest Research Institute assistance to NASA in biomedical areas of the technology utilization program

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Applications of aerospace technology to biomedical science are described. Recent research and development of specific techniques, services, and equipment adopted by physicians to help combat disease and disability are reviewed.

  9. REPORT ON TWO PROCESS EQUIPMENT CHANGES FOR FEDERAL PAINTING FACILITIES

    EPA Science Inventory

    EPA's National Risk Management Research Laboratory (NRMRL) has actively participated in the Strategic Environmental Research and Development Program (SERDP) to develop innovative technologies and processes for the reduction of environmental pollution. Technology developments fro...

  10. 34 CFR 385.4 - What definitions apply to these programs?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... technology device means any item, piece of equipment, or product system, whether acquired commercially off... capabilities of individuals with disabilities. Assistive technology service means any service that directly assists an individual with a disability in the selection, acquisition, or use of an assistive technology...

  11. 34 CFR 385.4 - What definitions apply to these programs?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... technology device means any item, piece of equipment, or product system, whether acquired commercially off... capabilities of individuals with disabilities. Assistive technology service means any service that directly assists an individual with a disability in the selection, acquisition, or use of an assistive technology...

  12. 34 CFR 385.4 - What definitions apply to these programs?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... technology device means any item, piece of equipment, or product system, whether acquired commercially off... capabilities of individuals with disabilities. Assistive technology service means any service that directly assists an individual with a disability in the selection, acquisition, or use of an assistive technology...

  13. 34 CFR 385.4 - What definitions apply to these programs?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... technology device means any item, piece of equipment, or product system, whether acquired commercially off... capabilities of individuals with disabilities. Assistive technology service means any service that directly assists an individual with a disability in the selection, acquisition, or use of an assistive technology...

  14. Army Science Board 1991 Summer Study - Soldier as a System

    DTIC Science & Technology

    1991-12-01

    munitions, unit radio. All the multiple components of the Soldier System - the programs, organization, systems, technologies, and soldier types - interact ...functional interaction between soldieis ar.d their clothing and individual equipment; (2) the functional interaction of the equipment components...which must operate alone or together; and (3) the interaction between 6-,ldier-pc’forinanc,, equipment weight and total soldier-carn-ed load. The need

  15. Controlling mechanisms over the internet

    NASA Astrophysics Data System (ADS)

    Lumia, Ronald

    1997-01-01

    The internet, widely available throughout the world, can be used to control robots, machine tools, and other mechanisms. This paper will describe a low-cost virtual collaborative environment (VCE) which will connect users with distant equipment. The system is based on PC technology, and incorporates off-line-programming with on-line execution. A remote user programs the systems graphically and simulates the motions and actions of the mechanism until satisfied with the functionality of the program. The program is then transferred from the remote site to the local site where the real equipment exists. At the local site, the simulation is run again to check the program from a safety standpoint. Then, the local user runs the program on the real equipment. During execution, a camera in the real workspace provides an image back to the remote user through a teleconferencing system. The system costs approximately 12,500 dollars and represents a low-cost alternative to the Sandia National Laboratories VCE.

  16. Medically related activities of application team program

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Application team methodology identifies and specifies problems in technology transfer programs to biomedical areas through direct contact with users of aerospace technology. The availability of reengineering sources increases impact of the program on the medical community and results in broad scale application of some bioinstrumentation systems. Examples are given that include devices adapted to the rehabilitation of neuromuscular disorders, power sources for artificial organs, and automated monitoring and detection equipment in clinical medicine.

  17. Lithium-Ion Battery Program Status

    NASA Technical Reports Server (NTRS)

    Surampudi, S.; Huang, C. K.; Smart, M.; Davies, E.; Perrone, D.; Distefano, S.; Halpert, G.

    1996-01-01

    The objective of this program is to develop rechargeable Li-ion cells for future NASA missions. Applications that would benefit from this project are: new millenium spacecraft; rovers; landers; astronaut equipment; and planetary orbiters. The approach of this program is: select electrode materials and electrolytes; identify failure modes and mechanisms and enhance cycle life; demonstrate Li-ion cell technology with liquid electrolyte; select candidate polymer electrolytes for Li-ion polymer cells; and develop Li-ion polymer cell technology.

  18. Rail transit fare collection: Policy and technology assessment

    NASA Technical Reports Server (NTRS)

    Deshpande, G. K.; Cucchissi, J.; Heft, R. C.

    1982-01-01

    The impact of fare policies and fare structure on the selection of equipment was investigated, fare collection systems are described, hardware and technology related problems are documented, and the requirements of a fare collection simulation model are outlined. Major findings include: (1) a wide variation in the fare collection systems and equipment, caused primarily by historical precedence; (2) the reliability of AFC equipment used at BART and WMATA discouraged other properties from considering use of similar equipment; (3) existing equipment may not meet the fare collection needs of properties in the near future; (4) the cost of fare collection operation and maintenance is high; and (5) the relatively small market in fare collection equipment discourages new product development by suppliers. Recommendations for fare collection R&D programs include development of new hardware to meet rail transit needs, study of impacts of alternate fare policies increased communication among policymakers, and consensus on fare policy issues.

  19. Notions of Technology and Visual Literacy

    ERIC Educational Resources Information Center

    Stankiewicz, Mary Ann

    2004-01-01

    For many art educators, the word "technology" conjures up visions of overhead projectors and VCRs, video and digital cameras, computers equipped with graphic programs and presentation software, digital labs where images rendered in pixels replace the debris of charcoal dust and puddled paints. One forgets that visual literacy and technology have…

  20. A Contemporary Preservice Technology Education Program

    ERIC Educational Resources Information Center

    Flanigan, Rod; Becker, Kurt; Stewardson, Gary

    2012-01-01

    In order to teach engineering education, today's engineering and technology education teachers must be equipped with lesson plans to teach engineering design, among other principles, to the 6th-12th grade levels. At Utah State University (USU), curriculum has been developed for preservice engineering and technology education teachers that…

  1. Alternative Fuels Data Center

    Science.gov Websites

    Idle Reduction Equipment Excise Tax Exemption Qualified on-board idle reduction devices and advanced insulation are exempt from the federal excise tax imposed on the retail sale of heavy-duty highway ) SmartWay Technology Program Federal Excise Tax Exemption website. The exemption applies to equipment that

  2. Things the Teacher of Your Media Utilization Course May Not Have Told You.

    ERIC Educational Resources Information Center

    Ekhaml, Leticia

    1995-01-01

    Discusses maintenance and safety information that may not be covered in a technology training program. Topics include computers, printers, televisions, video and audio equipment, electric roll laminators, overhead and slide projectors, equipment carts, power cords and outlets, batteries, darkrooms, barcode readers, Liquid Crystal Display units,…

  3. Crew equipment applications - Firefighter's Breathing System.

    NASA Technical Reports Server (NTRS)

    Smith, W. L.

    1973-01-01

    The Firefighter's Breathing System (FBS) represents a significant step in applying NASA's crew equipment technologists and technologies to civilian sector problems. This paper describes the problem, the utilization of user-design committees as a forum for development of design goals, the design of the FBS, and the field test program to be conducted.

  4. 33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities, including professional certifications and organizational memberships of the nominee or the primary staff to..., appropriate technology such as computer modeling programs and hardware or testing materials and equipment; (8...

  5. Technology Education and the Elementary School.

    ERIC Educational Resources Information Center

    Thode, Terry

    1996-01-01

    In the technology education program at Hemingway School in Ketchum, Idaho, students are involved in hands-on activities that encourage the use of critical thinking skills, tools, and high-tech equipment to solve problems related to real world situations. (Author)

  6. The Crescent Project : an evaluation of an element of the HELP Program : executive summary

    DOT National Transportation Integrated Search

    1994-02-01

    The HELP/Crescent Project on the West Coast evaluated the applicability of four technologies for screening transponder-equipped vehicles. The technologies included automatic vehicle identification, weigh-in-motion, automatic vehicle classification, a...

  7. Creative Technology for Schoolchildren.

    ERIC Educational Resources Information Center

    Stolyarov, Yuri

    1981-01-01

    Describes creative technology programs for elementary and secondary school children in the Soviet Union. Elementary school projects include aircraft, ship, and rocket models, amateur radio, electrical engineering, and electronics. Senior high school students design and build small-capacity vehicles, agricultural equipment, and electronic…

  8. Technology transfer and the NASA Technology Utilization Program - An overview

    NASA Technical Reports Server (NTRS)

    Clarks, Henry J.; Rose, James T.; Mangum, Stephen D.

    1989-01-01

    The goal of the NASA Technology Utilization (TU) Program is to broaden and accelerate the transfer of aerospace technology and to develop new commercial products and processes that represent additional return on the national investment in the U.S. space programs. The mechanisms established by the TU Program includes TU offices, publications, the information retrieval, software dissemination, and the NASA Applications Engineering Program. These mechanisms are implemented through a nationwide NASA TU Network, working closely with industry and public sector organizations to encourage and facilitate their access and utilization of the results of the U.S space programs. Examples of TU are described, including a method for the reduction of metal fatigue in textile equipment and a method for the management of wandering behavior in Alzheimer's patients.

  9. Successful K-12 Technology Planning: Ten Essential Elements. ERIC Digest.

    ERIC Educational Resources Information Center

    Barnett, Harvey

    Over the last 20 years, K-12 schools have spent millions of dollars equipping their schools with the latest technologies, but often without a thoughtful plan of how their use would impact learning and teaching. What is important is how the technology is integrated with the instructional program. To ensure that technology dollars have an impact on…

  10. 10 CFR 431.18 - Testing laboratories.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... EQUIPMENT Electric Motors Test Procedures, Materials Incorporated and Methods of Determining Efficiency... Technology/National Voluntary Laboratory Accreditation Program (NIST/NVLAP); or (2) A laboratory... of the National Institute of Standards and Technology (NIST) which is part of the U.S. Department of...

  11. Alternative Fuels Data Center

    Science.gov Websites

    Advanced Technology Vehicle (ATV) and Alternative Fuel Infrastructure Manufacturing Incentives Through the Advanced Technology Vehicles Manufacturing Loan Program, manufacturers may be eligible for direct loans for up to 30% of the cost of re-equipping, expanding, or establishing manufacturing

  12. 32 CFR 241.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PILOT PROGRAM FOR TEMPORARY EXCHANGE OF INFORMATION TECHNOLOGY PERSONNEL § 241.2 Definitions. In this... organizational goals. Information technology (IT) as defined in section 11101 of title 40, U.S.C. includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary...

  13. 42 CFR 495.302 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... of “Certified EHR Technology” for FY and CY 2015 and subsequent years). Children's hospital means a... AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements... thereof by the State agency. Acquisition means to acquire health information technology (HIT) equipment or...

  14. Rescue Equipment

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The Lifeshear cutter, a rescue tool for freeing accident victims from wreckage, was developed under the Clinton Administration's Technology Reinvestment Program. Prior cutting equipment was cumbersome and expensive; the new cutter is 50 percent lighter and 70 percent cheaper. The cutter is pyrotechnically-actuated, using a miniature version of the power cartridges used for separation devices on the Space Shuttle and other NASA spacecraft. Hi-Shear Technology Corporation developed the cutter with the Jet Propulsion Laboratory and input from the City of Torrance (California) Fire Department.

  15. Integral Engine Inlet Particle Separator. Volume 1. Technology Program

    DTIC Science & Technology

    1975-07-01

    inlet particle separators for future Army aircraft gas turbine engines . Appropriate technical personnel of this Directorate have reviewed this report...USAAMRDL-TR-75-31A I - / INTEGRAL ENGINE INLET PARTICLE SEPARATOR Volume I-- Technology Program General Electric Company Aircraft Engine Group...N1 i 9ap mm tm~qu INTRODUCTION The adverse environments in which Army equipment operates impose severe )enalties upon gas turbine engine performance

  16. Use of Educational Technology in Agricultural Education: A National Study. Project Final Report Submitted to the National FFA Board of Directors.

    ERIC Educational Resources Information Center

    Birkenholz, Robert J.; And Others

    A study was conducted to assess the extent to which instructional technology has been adopted in secondary programs of agricultural education in the United States. Teachers from 479 secondary agriculture programs were randomly selected to provide responses to a mailed survey instrument requesting information about types and quantity of equipment,…

  17. Programming Programmable Logic Controller. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Lipsky, Kevin

    This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

  18. Getting it "right": how collaborative relationships between people with disabilities and professionals can lead to the acquisition of needed assistive technology.

    PubMed

    Johnston, Patricia; Currie, Leanne M; Drynan, Donna; Stainton, Tim; Jongbloed, Lyn

    2014-09-01

    The purpose of this study was to examine the impact of a consumer-led equipment and device program [Equipment and Assistive Technology Initiative (EATI) in British Columbia, Canada] from the perspective of program participants. The importance of collaborative assessments for obtaining the right assistive technology (AT) for meeting an individual's needs is discussed in light of the program's participant-centered "Participation Model", or philosophy by which the program is structured. A cross-sectional survey with participants and semi-structured interviews were conducted with participants (≥ 18 years) who held a range of disabilities. The survey asked participants to rank their AT and to identify the method by which they obtained the technology [by self, prescribed by a health professional or collaborative (self and professional)]. Interviews addressed participants' opinions about obtaining and using AT. In total, 357 people responded to the survey (17% response rate) and 16 people participated in the interviews. The highest ranking AT was assigned to devices assessed via a collaborative method (self = 31%, practitioner = 26%, collaborative = 43%; χ(2) (16,180) = 39.604, p < 0.001). Shared decision-making between health professionals and people with disabilities within the assessment process for assistive technology leads to what participants perceive as the right AT. Collaborative decision-making can lead to the selection of assistive technology that is considered needed and right for the individual. Person-centered philosophy associated with assistive technology assessment is contributing to attaining "the right" AT.

  19. Developing a comprehensive training curriculum for integrated predictive maintenance

    NASA Astrophysics Data System (ADS)

    Wurzbach, Richard N.

    2002-03-01

    On-line equipment condition monitoring is a critical component of the world-class production and safety histories of many successful nuclear plant operators. From addressing availability and operability concerns of nuclear safety-related equipment to increasing profitability through support system reliability and reduced maintenance costs, Predictive Maintenance programs have increasingly become a vital contribution to the maintenance and operation decisions of nuclear facilities. In recent years, significant advancements have been made in the quality and portability of many of the instruments being used, and software improvements have been made as well. However, the single most influential component of the success of these programs is the impact of a trained and experienced team of personnel putting this technology to work. Changes in the nature of the power generation industry brought on by competition, mergers, and acquisitions, has taken the historically stable personnel environment of power generation and created a very dynamic situation. As a result, many facilities have seen a significant turnover in personnel in key positions, including predictive maintenance personnel. It has become the challenge for many nuclear operators to maintain the consistent contribution of quality data and information from predictive maintenance that has become important in the overall equipment decision process. These challenges can be met through the implementation of quality training to predictive maintenance personnel and regular updating and re-certification of key technology holders. The use of data management tools and services aid in the sharing of information across sites within an operating company, and with experts who can contribute value-added data management and analysis. The overall effectiveness of predictive maintenance programs can be improved through the incorporation of newly developed comprehensive technology training courses. These courses address the use of key technologies such as vibration analysis, infrared thermography, and oil analysis not as singular entities, but as a toolbox resource from which to address overall equipment and plant reliability in a structured program and decision environment.

  20. Assistive and Instructional Technology: Understanding the Differences to Enhance Programming and Teaching

    ERIC Educational Resources Information Center

    Shepley, Collin; Lane, Justin D.; Ayres, Kevin; Douglas, Karen H.

    2017-01-01

    The Assistive Technology Act of 2004 (29 U.S.C. Sec 2202(2)) defines AT as "any item, piece of equipment, or product system, whether acquired commercially, modified, or customized, that is used to increase, maintain, or improve functional capabilities of individuals with disabilities." Instructional Technology (IT), a term not…

  1. 33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... be associated with its duties for the specific project; (7) In-house availability of, or access to, appropriate technology such as computer modeling programs and hardware or testing materials and equipment; (8...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities...

  2. 33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... be associated with its duties for the specific project; (7) In-house availability of, or access to, appropriate technology such as computer modeling programs and hardware or testing materials and equipment; (8...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities...

  3. Application and Design Characteristics of Generalized Training Devices.

    ERIC Educational Resources Information Center

    Parker, Edward L.

    This program identified applications and developed design characteristics for generalized training devices. The first of three sequential phases reviewed in detail new developments in Naval equipment technology that influence the design of maintenance training devices: solid-state circuitry, modularization, digital technology, standardization,…

  4. 32 CFR 241.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PILOT PROGRAM FOR TEMPORARY EXCHANGE OF INFORMATION TECHNOLOGY PERSONNEL (EFF. UNTIL 7-20-2012) § 241.2... achieving the organizational goals. Information technology (IT) as defined in section 11101 of title 40, U.S.C. includes computers, ancillary equipment (including imaging peripherals, input, output, and...

  5. 47 CFR 76.1207 - Waivers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND... programming systems, or an equipment provider that such a waiver is necessary to assist the development or... video programming systems, technology, or products. Such waiver requests should be made pursuant to § 76...

  6. 47 CFR 76.1207 - Waivers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND... programming systems, or an equipment provider that such a waiver is necessary to assist the development or... video programming systems, technology, or products. Such waiver requests should be made pursuant to § 76...

  7. 47 CFR 76.1207 - Waivers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND... programming systems, or an equipment provider that such a waiver is necessary to assist the development or... video programming systems, technology, or products. Such waiver requests should be made pursuant to § 76...

  8. Department of Defense counterdrug technology development of non-intrusive inspection systems

    NASA Astrophysics Data System (ADS)

    Pennella, John J.

    1997-02-01

    The Naval Surface Warfare Center Dahlgren Division serves as the executive agent for the DoD's Contraband Detection and Cargo Container Inspection Technology Development Program. The goal of the DoD non-intrusive inspection (NII) program is to develop prototype equipment that can be used to inspect containers and vehicles, quickly and in large numbers without unnecessary delays in the movement of legitimate cargo. This paper summaries the past accomplishments of the program, current status, and future plans.

  9. Implications for patient safety in the use of safe patient handling equipment: a national survey.

    PubMed

    Elnitsky, Christine A; Lind, Jason D; Rugs, Deborah; Powell-Cope, Gail

    2014-12-01

    The prevalence of musculoskeletal injuries among nursing staff has been high due to patient handling and movement. Internationally, healthcare organizations are integrating technological equipment into patient handling and movement to improve safety. Although evidence shows that safe patient handling programs reduce work-related musculoskeletal injuries in nursing staff, it is not clear how safe these new programs are for patients. The objective of this study was to explore adverse patient events associated with safe patient handling programs and preventive approaches in US Veterans Affairs medical centers. The study surveyed a convenience sample of safe patient handling program managers from 51 US Department of Veterans Affairs medical centers to collect data on skin-related and fall-related adverse patient events. Both skin- and fall-related adverse patient events associated with safe patient handling occurred at VA Medical centers. Skin-related events included abrasions, contusions, pressure ulcers and lacerations. Fall-related events included sprains and strains, fractures, concussions and bleeding. Program managers described contextual factors in these adverse events and ways of preventing the events. The use of safe patient handling equipment can pose risks for patients. This study found that organizational factors, human factors and technology factors were associated with patient adverse events. The findings have implications for how nursing professionals can implement safe patient handling programs in ways that are safe for both staff and patients. Published by Elsevier Ltd.

  10. How to estimate the cost of point-of-care CD4 testing in program settings: an example using the Alere Pima Analyzer in South Africa.

    PubMed

    Larson, Bruce; Schnippel, Kathryn; Ndibongo, Buyiswa; Long, Lawrence; Fox, Matthew P; Rosen, Sydney

    2012-01-01

    Integrating POC CD4 testing technologies into HIV counseling and testing (HCT) programs may improve post-HIV testing linkage to care and treatment. As evaluations of these technologies in program settings continue, estimates of the costs of POC CD4 tests to the service provider will be needed and estimates have begun to be reported. Without a consistent and transparent methodology, estimates of the cost per CD4 test using POC technologies are likely to be difficult to compare and may lead to erroneous conclusions about costs and cost-effectiveness. This paper provides a step-by-step approach for estimating the cost per CD4 test from a provider's perspective. As an example, the approach is applied to one specific POC technology, the Pima Analyzer. The costing approach is illustrated with data from a mobile HCT program in Gauteng Province of South Africa. For this program, the cost per test in 2010 was estimated at $23.76 (material costs  = $8.70; labor cost per test  = $7.33; and equipment, insurance, and daily quality control  = $7.72). Labor and equipment costs can vary widely depending on how the program operates and the number of CD4 tests completed over time. Additional costs not included in the above analysis, for on-going training, supervision, and quality control, are likely to increase further the cost per test. The main contribution of this paper is to outline a methodology for estimating the costs of incorporating POC CD4 testing technologies into an HCT program. The details of the program setting matter significantly for the cost estimate, so that such details should be clearly documented to improve the consistency, transparency, and comparability of cost estimates.

  11. 45 CFR 1624.3 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., speaking, breathing, learning, and working; (iii) Has a record of such impairment means has a history of... program. (e) Auxiliary aids and/or other assistive technologies means any item, piece of equipment, or.../or other assistive technologies include, but are not limited to, brailled and taped material...

  12. FIELD ANALYTICAL SCREENING PROGRAM: PCP METHOD - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    EPA Science Inventory

    The Field Analytical Screening Program (FASP) pentachlorophenol (PCP) method uses a gas chromatograph (GC) equipped with a megabore capillary column and flame ionization detector (FID) and electron capture detector (ECD) to identify and quantify PCP. The FASP PCP method is design...

  13. Indian Education and Training Opportunities at Columbia Jr. College, [Columbia, California.

    ERIC Educational Resources Information Center

    Columbia Junior Coll., CA.

    The purpose of this project was to develop a transitional instructional program to serve out-of-school and drop-out American Indian youth entering vocational education programs in forest technology, fire science, heavy equipment maintenance and health occupations. The project was designed to develop a 3-quarter transitional program concerned with…

  14. The Star Schools Distance-Learning Program: Results from the Mandated Study.

    ERIC Educational Resources Information Center

    Tushnet, Naida C.; And Others

    The Star Schools Assistance Program has been funding activities since 1988. It provides projects with seed money to develop distance learning programming and equip sites. In addition, Star Schools has served as a focal point for demonstrating innovative uses of technology to advance educational opportunity and improvement. This paper represents…

  15. Solar Energy Systems

    NASA Technical Reports Server (NTRS)

    1981-01-01

    A waste water treatment plant in Wilton, Maine, where sludge is converted to methane gas, and Monsanto Company's Environmental Health Laboratory in St. Louis Missouri, where more than 200 solar collectors provide preheating of boiler feed water for laboratory use are representative of Grumman's Sunstream line of solar energy equipment. This equipment was developed with technology from NASA's Apollo lunar module program.

  16. Parents' Perceptions of Their Child's Computer Use at Home as a Result of Technology Use in the School

    ERIC Educational Resources Information Center

    Uline, Carol S.; Notar, Charles E.; Barkley, Jordan M.; Wilson, Janell D.; Herring, Donna F.; McEntyre, Judy

    2008-01-01

    This article focuses on the three-year findings of a parent survey designed to gauge their students' technology interest while receiving instruction from student teachers in a federal educational technology grant. A major objective of the grant was to engage pre-service teachers in a computer technology training program designed to equip them with…

  17. Investigation of a family of power conditioners integrated into a utility grid: final report Category I

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wood, P.; Putkovich, R.P.

    1981-07-01

    A study was conducted of the requirements for and technologies applicable to power conditioning equipment in residential solar photovoltaic systems. A survey of companies known or thought to manufacture power conditioning equipment was conducted to asses the technology. Technical issues regarding ac and dc interface requirements were studied. A baseline design was selected to be a good example of existing technology which would not need significant development effort for its implementation. Alternative technologies are evaluated to determine which meet the baseline specification, and their costs and losses are evaluated. Areas in which cost improvements can be obtained are studied, andmore » the three best candidate technologies--the current-sourced converter, the HF front end converter, and the programmed wave converter--are compared. It is concluded that the designs investigated will meet, or with slight improvement could meet, short term efficiency goals. Long term efficiency goals could be met if an isolation transformer were not required in the power conditioning equipment. None of the technologies studied can meet cost goals unless further improvements are possible. (LEW)« less

  18. TECHNOLOGY VERIFICATION OF COMMERCIALLY AVAILABLE METHODS FOR DECONTAMINATION OF INDOOR SURFACES CONTAMINATED WITH BIOLOGICAL OR CHEMICAL AGENTS

    EPA Science Inventory

    To support the Nation's Homeland Security Program, this U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) project is conducted to verify the performance of commercially available products, methods, and equipment for decontamination of hard and...

  19. Expert Perspectives: Future of Teacher Preparation in the Digital Age

    ERIC Educational Resources Information Center

    Alliance for Excellent Education, 2013

    2013-01-01

    As schools, classrooms, and districts move toward more sophisticated instructional technologies to successfully implement higher college- and career-ready standards, educator-preparation programs must act quickly to equip future educators with the necessary skills to use technology effectively to personalize instruction and increase student…

  20. Technology survey of electrical power generation and distribution for MIUS application

    NASA Technical Reports Server (NTRS)

    Gill, W. L.; Redding, T. E.

    1975-01-01

    Candidate electrical generation power systems for the modular integrated utility systems (MIUS) program are described. Literature surveys were conducted to cover both conventional and exotic generators. Heat-recovery equipment associated with conventional power systems and supporting equipment are also discussed. Typical ranges of operating conditions and generating efficiencies are described. Power distribution is discussed briefly. Those systems that appear to be applicable to MIUS have been indicated, and the criteria for equipment selection are discussed.

  1. Research Equipment

    DTIC Science & Technology

    1989-03-25

    studied for the solution of n equations in n + I unknowns. A path following program has been written, and Is being tested or, various problems using the...in the commerical p-version finite element program PROBE ( Noetic Technologies, Inc.). The numerical results are part of two Ph.D. theses awarded in

  2. Improvement of the Processes of Liquid-Phase Epitaxial Growth of Nanoheteroepitaxial Structures

    NASA Astrophysics Data System (ADS)

    Maronchuk, I. I.; Sanikovich, D. D.; Potapkov, P. V.; Vel‧chenko, A. A.

    2018-05-01

    We have revealed the shortcomings of equipment and technological approaches in growing nanoheteroepitaxial structures with quantum dots by liquid-phase epitaxy. We have developed and fabricated a new vertical barreltype cassette for growing quantum dots and epitaxial layers of various thicknesses in one technological process. A physico-mathematical simulation has been carried out of the processes of liquid-phase epitaxial growth of quantumdimensional structures with the use of the program product SolidWorks (FlowSimulation program). Analysis has revealed the presence of negative factors influencing the growth process of the above structures. The mathematical model has been optimized, and the equipment has been modernized without additional experiments and measurements. The flow dynamics of the process gas in the reactor at various flow rates has been investigated. A method for tuning the thermal equipment has been developed. The calculated and experimental temperature distributions in the process of growing structures with high reproducibility are in good agreement, which confirms the validity of the modernization made.

  3. A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    de la Rue du Can, Stephane; Phadke, Amol; Leventis, Greg

    Incentive programs are an essential policy tool to move the market toward energy-efficient products. They offer a favorable complement to mandatory standards and labeling policies by accelerating the market penetration of energy-efficient products above equipment standard requirements and by preparing the market for increased future mandatory requirements. They sway purchase decisions and in some cases production decisions and retail stocking decisions toward energy-efficient products. Incentive programs are structured according to their regulatory environment, the way they are financed, by how the incentive is targeted, and by who administers them. This report categorizes the main elements of incentive programs, using casemore » studies from the Major Economies Forum to illustrate their characteristics. To inform future policy and program design, it seeks to recognize design advantages and disadvantages through a qualitative overview of the variety of programs in use around the globe. Examples range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-Points that reward customers for buying efficient appliances under a government recovery program (Japan). We found that evaluations have demonstrated that financial incentives programs have greater impact when they target highly efficient technologies that have a small market share. We also found that the benefits and drawbacks of different program design aspects depend on the market barriers addressed, the target equipment, and the local market context and that no program design surpasses the others. The key to successful program design and implementation is a thorough understanding of the market and effective identification of the most important local factors hindering the penetration of energy-efficient technologies.« less

  4. Injection of Contaminants into a Simulated Water Distribution System Equipped with Continuous Multi-Parameter Water Monitors

    EPA Science Inventory

    The U.S. EPA’s Technology Testing and Evaluation Program has been charged by EPA to evaluate the performance of commercially available water security-related technologies. Multi-parameter water monitors for distributions systems have been evaluated as such a water security techn...

  5. Team Teaching with Academic Core Curricula Teachers: Using Aviation Concepts

    ERIC Educational Resources Information Center

    Berentsen, Lowell W.

    2006-01-01

    Technology education teachers today have at their disposal the skills, opportunity, experience, ingenuity, expertise, equipment, and environment to greatly improve students' ability to learn and apply the knowledge they have gained in their academic programs. When a technology education teacher joins forces with an academic core teacher, the…

  6. The Purposeful Use of Technology.

    ERIC Educational Resources Information Center

    Asfeldt, Morten; Hvenegaard, Glen

    2003-01-01

    Equipment use in outdoor education is secondary to having clear goals and sound pedagogy. Examples from the authors' 21-day canoe expeditions to the Canadian tundra illustrate how the reflection component of an outdoor program can mitigate the potential negative side effects of emerging technology. Involving the group in decisions concerning…

  7. When Stars Align: Teachers & Students Shine Brighter

    ERIC Educational Resources Information Center

    Baker, Sheila F.; Willis, Jana

    2016-01-01

    A new teacher enters the classroom for the first time equipped with teaching strategies, technology-integration models, and classroom experiences acquired during his or her teacher preparation program. These new teachers are often unaware that down the hall exists their greatest resource for today's technologies and their strongest potential…

  8. 75 FR 24824 - Energy Efficiency Program for Consumer Products: Public Meeting and Availability of the Framework...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-06

    ... Availability of the Framework Document for Commercial Refrigeration Equipment AGENCY: Office of Energy... data collection process to consider amended energy conservation standards for commercial refrigeration... Energy, Building Technologies Program, Mailstop EE-2J, Framework Document for Commercial Refrigeration...

  9. 2007 Mississippi Curriculum Framework: Postsecondary Agricultural Mechanics Technology. (Program CIP: 01.0201 - Agricultural Mechanics and Equipment/Machine Technology)

    ERIC Educational Resources Information Center

    Massey, Jeremy; Louwerens, Shane; Galey, Joe

    2007-01-01

    As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

  10. 2011 Mississippi Curriculum Framework: Postsecondary Agricultural Technician Technology. (Program CIP: 01.0201 - Agricultural Mechanics and Equipment/Machine Technology)

    ERIC Educational Resources Information Center

    Massey, Jeremy; Louwerens, Shane; Galey, Joe

    2011-01-01

    As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

  11. Reducing Pesticide Drift

    EPA Pesticide Factsheets

    Provides information about pesticide spray drift, including problems associated with drift, managing risks from drift and the voluntary Drift Reduction Technology program that seeks to reduce spray drift through improved spray equipment design.

  12. Inservice Program for Math/Science Teachers.

    ERIC Educational Resources Information Center

    Kinsley, Carol W.; Sweet, Helaine D.

    1986-01-01

    A school-business partnership between Monsanto Company and the Springfield Public Schools, Massachusetts, focuses on inservice teacher education. Seminar series equip teachers with current information on the technological revolution. (CJH)

  13. Light Learning.

    ERIC Educational Resources Information Center

    Cutshall, Sandy

    2002-01-01

    Describes a career and technical education program on photonics, the study, research, and development of equipment and concepts used in the transmission of information through light, including fiber optics and experimental laser technologies. (JOW)

  14. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR OPERATION AND MAINTENANCE OF RELATED COMPUTER EQUIPMENT FOR IIT NHEXAS (IIT-A-1.0)

    EPA Science Inventory

    The purpose of this SOP is to describe the procedures for using and maintaining the related microcomputer equipment at the Illinois Institute of Technology (IIT)/NHEXAS site. These methods were used in all data operations and maintenance routines during the Arizona NHEXAS projec...

  15. Equipment upgrades for the Pu-238 program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Congdon, J.W.; Stephens, W.D.; Marra, J.E.

    1990-02-14

    Much of the equipment and instrumentation in the Pu-238 production facilities is more than 15 years old. Significant improvements have been made in the available instrumentation, in particular, due to the application of microprocessors and lasers. The Actinide Technology Section of SRL has selected and is in the process of evaluating several state-of-the-art instruments which have potential applications in the Pu-238 program. The ease of operation and the accuracy of the instruments have been improved and, in most cases, the cost of the instruments have decreased. 5 refs.

  16. Manufacturing engineering: Principles for optimization

    NASA Astrophysics Data System (ADS)

    Koenig, Daniel T.

    Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

  17. Welding technology. [technology transfer of NASA developments to commercial organizations

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Welding processes which have been developed during NASA space program activities are discussed. The subjects considered are: (1) welding with an electron gun, (2) technology of welding special alloys, and (3) welding shop techniques and equipment. The material presented is part of the combined efforts of NASA and the Small Business Administration to provide technology transfer of space-related developments to the benefit of commercial organizations.

  18. Advanced technologies for maintenance of electrical systems and equipment at the Savannah River Site Defense Waste Processing Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Husler, R.O.; Weir, T.J.

    1991-01-01

    An enhanced maintenance program is being established to characterize and monitor cables, components, and process response at the Savannah River Site, Defense Waste Processing Facility. This facility was designed and constructed to immobilize the radioactive waste currently stored in underground storage tanks and is expected to begin operation in 1993. The plant is initiating the program to baseline and monitor instrument and control (I C) and electrical equipment, remote process equipment, embedded instrument and control cables, and in-cell jumper cables used in the facility. This program is based on the electronic characterization and diagnostic (ECAD) system which was modified tomore » include process response analysis and to meet rigid Department of Energy equipment requirements. The system consists of computer-automated, state-of-the-art electronics. The data that are gathered are stored in a computerized database for analysis, trending, and troubleshooting. It is anticipated that the data which are gathered and trended will aid in life extension for the facility.« less

  19. Advanced technologies for maintenance of electrical systems and equipment at the Savannah River Site Defense Waste Processing Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Husler, R.O.; Weir, T.J.

    1991-12-31

    An enhanced maintenance program is being established to characterize and monitor cables, components, and process response at the Savannah River Site, Defense Waste Processing Facility. This facility was designed and constructed to immobilize the radioactive waste currently stored in underground storage tanks and is expected to begin operation in 1993. The plant is initiating the program to baseline and monitor instrument and control (I&C) and electrical equipment, remote process equipment, embedded instrument and control cables, and in-cell jumper cables used in the facility. This program is based on the electronic characterization and diagnostic (ECAD) system which was modified to includemore » process response analysis and to meet rigid Department of Energy equipment requirements. The system consists of computer-automated, state-of-the-art electronics. The data that are gathered are stored in a computerized database for analysis, trending, and troubleshooting. It is anticipated that the data which are gathered and trended will aid in life extension for the facility.« less

  20. Italy-Japan international project-based learning for developing human resources using design of welfare equipment as a subject.

    PubMed

    Hanafusa, A; Komeda, T; Ito, K; Zobel, P Beomonte

    2015-08-01

    Project-based learning (PBL) is effective for developing human resources of young students. The design of welfare equipment, such as wheelchairs and gait assistive devices, is taken as the subject in this study because these devices must be fit to their environment, users, and method of use; students must consider the circumstances of each country concerned. The program commenced in 2012 at L'Aquila, Italy, and the Shibaura Institute of Technology, Japan and has been continuing for three years. Students were divided into four groups and discussions were held on how to adapt the equipment to the user and environment. After discussion, they designed and simulated a model of the equipment using CAD. Finally, they presented their designs to each other. Through the program, students had fruitful discussions, exchanged ideas from different cultures, and learned from each other. Furthermore, friendships among the students were nurtured. It is believed that the objective of the program was satisfactorily accomplished.

  1. Physical security equipment for combating terrorism

    NASA Astrophysics Data System (ADS)

    Toscano, Michael

    2002-08-01

    The objective of the Department of Defense Physical Security Equipment (DoD PSE) RDT&E program is to provide end users within the four Services with the most efficient and productive physical security (PS) at the most reasonable cost to ensure the effective protection of DoD resources. These resources include personnel, nuclear weapons, classified information, materiel, and readiness assets. As a result of the1996 Khobar Towers terrorist bombing incident, the DoD PSE program began to receive additional funding in 1997 for Force Protection Commercial-Off-The-Shelf (FP COTS) equipment evaluation and testing. The FP COTS testing applies to all available technologies, which are considered effective for DoD use. Successive terrorist incidents occurring since Khobar Towers have resulted in increasing focus on the demonstration and validation of equipment necessary to combat the ubiquitously asymmetric terrorist threat.

  2. Implementation of a solvent management program to control paint shop volatile organic compounds

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Floer, M.M.; Hicks, B.H.

    1997-12-31

    The majority of automobile assembly plant volatile organic compound (VOC) emissions are generated from painting operations. Typical paint operations generate more than 90 percent of the total plant emissions and, up to, 50 percent can be released by cleaning sources. Plant practices which contribute to the release of VOC emissions include the cleaning of paint lines and equipment, tanks, spray booths, floors and vehicles. Solvents continue to be the largest contributing source of VOC emissions in an automotive paint shop. To reduce overall VOC emissions, environmental regulations and guidelines were introduced under the Clean Air Act; Pollution Prevention and Wastemore » Minimization programs, Control Techniques, and special air permit conditions. The introduction of these regulations and guidelines has driven industry toward continual refinement of their present cleaning methods while pursuing new techniques and technologies. Industry has also shown a proactive approach by introducing new waterborne and powder coating paint technologies to reduce overall emissions. As new paint technologies are developed and introduced, special attention must be given to the types of materials utilized for cleaning. The development and implementation of a solvent management program allows a facility to standardize a program to properly implement materials, equipment, technologies and work practices to reduce volatile organic compound emissions, meet strict cleaning requirements posed by new paint technologies and produce a vehicle which meets the high quality standards of the customer. This paper will assess the effectiveness of a solvent management program by examining pollution prevention initiatives and data from four different painting operations.« less

  3. 78 FR 55889 - Energy Conservation Program: Energy Conservation Standards for Commercial Refrigeration Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including commercial refrigeration equipment (CRE). EPCA also requires the U.S. Department of Energy (DOE) to determine whether more-stringent, amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this notice, DOE proposes amended energy conservation standards for commercial refrigeration equipment. The notice also announces a public meeting to receive comment on these proposed standards and associated analyses and results.

  4. 78 FR 72077 - Energy Efficiency Program for Industrial Equipment: Final Determination Classifying UL...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-02

    ... Verification Services Inc. as a Nationally Recognized Certification Program for Small Electric Motors AGENCY... FURTHER INFORMATION CONTACT: Mr. Lucas Adin, U.S. Department of Energy, Building Technologies Office, Mail... conservation requirements for, among other things, electric motors and small electric motors, including test...

  5. Up against the limit: Office building electrical overload and the user benefits of energy-efficient office equipment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kressner, A.

    1995-12-01

    The area of office technology is the fastest growing use of electricity in the fastest growing sector-the commercial sector. More than 10% of energy used by the commercial sector is being used in office technology. The U.S. Environmental Protection Agency`s Energy Star Program is a manufacturer`s voluntary program and is, in effect, non-regulatory compliance. Energy efficiency in office technology is the basis for many benefits that result because the equipment inherently is more efficient in terms of its energy use. The old 486 computer processors, as they increased in MHz, required bigger fans. In fact, some of the high-end 486-machinesmore » came with two fans. Energy efficiency reduces the amount of cooling required, which can potentially reduce the fan requirements, if that feature is properly incorporated into the design by the manufacturer. Because the equipment is more energy efficient, the components can be placed in the equipment more closely-there could be a higher density of components so that the box becomes smaller. On the desktop, that infrastructure is the most expensive real estate, so a small footprint could be a very valuable feature. Also, because it`s more efficient, it rejects less heat, a benefit customers would identify. An added benefit is that the equipment saves energy. Class B office buildings, which are office buildings built `long ago,` don`t have the fundamental energy facilitating infrastructure for information technology, and retrofitting that technology becomes increasingly more expensive. There have been enormous strides in improving energy use in lighting, a major component of energy use in commercial buildings. In fact, energy use has been reduced from 2.5 to 3 W/sq ft to 1.5 W/sq ft, and potentially to below 1 W/sq ft. The plug load typically had been in the 0.3 to 0.5 W/sq ft range and has increased to 1 W/sq ft. Great value has been achieved because of the plug load, so this technology creates value far in excess of its energy use.« less

  6. Proceedings of the 1991 Oil Heat Technology Conference and Workshop

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDonald, R.J.

    This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted tomore » presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.« less

  7. Incorporating Geographic Information Science in the BSc Environ-mental Science Program in Botswana

    NASA Astrophysics Data System (ADS)

    Akinyemi, Felicia O.

    2018-05-01

    Critical human capacity in Geographic Information Science (GISc) is developed at the Botswana International University of Science and Technology, a specialized, research university. Strategies employed include GISc courses offered each semester to students from various programs, the conduct of field-based projects, enrolment in online courses, geo-spatial initiatives with external partners, and final year research projects utilizing geospatial technologies. A review is made of available GISc courses embedded in the Bachelor of Science Environmental Science program. GISc courses are incorporated in three Bachelor degree programs as distinct courses. Geospatial technologies are employed in several other courses. Student researches apply GIS and Remote Sensing methods to environmental and geological themes. The overarching goals are to equip students in various disciplines to utilize geospatial technologies, and enhance their spatial thinking and reasoning skills.

  8. Research on multi - channel interactive virtual assembly system for power equipment under the “VR+” era

    NASA Astrophysics Data System (ADS)

    Ren, Yilong; Duan, Xitong; Wu, Lei; He, Jin; Xu, Wu

    2017-06-01

    With the development of the “VR+” era, the traditional virtual assembly system of power equipment has been unable to satisfy our growing needs. In this paper, based on the analysis of the traditional virtual assembly system of electric power equipment and the application of VR technology in the virtual assembly system of electric power equipment in our country, this paper puts forward the scheme of establishing the virtual assembly system of power equipment: At first, we should obtain the information of power equipment, then we should using OpenGL and multi texture technology to build 3D solid graphics library. After the completion of three-dimensional modeling, we can use the dynamic link library DLL package three-dimensional solid graphics generation program to realize the modularization of power equipment model library and power equipment model library generated hidden algorithm. After the establishment of 3D power equipment model database, we set up the virtual assembly system of 3D power equipment to separate the assembly operation of the power equipment from the space. At the same time, aiming at the deficiency of the traditional gesture recognition algorithm, we propose a gesture recognition algorithm based on improved PSO algorithm for BP neural network data glove. Finally, the virtual assembly system of power equipment can really achieve multi-channel interaction function.

  9. OAST space technology accomplishments FY 1991

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The program consists of a continuum of space research and technology activities ranging from initial research to the full scale test of prototype equipment in space. Activities include work that is performed by in-house staff at the NASA Centers, university researchers supported by NASA funded grants and contracts, and industrial aerospace organizations under contract to NASA. These diverse activities provide advances in technology breakthroughs that may revolutionalize a technical discipline or mission concept. The work is managed and coordinated by OAST through a process that integrates the best available talent and capability in NASA, industry, and universities into a National civil space research and technology program.

  10. 15 CFR Supplement No. 3 to Part 730 - Other U.S. Government Departments and Agencies With Export Control Responsibilities

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... Nuclear Materials and Equipment * Nuclear Regulatory Commission, Office of International Programs, Tel. (301) 415-2344, Fax: (301) 415-2395. 10 CFR part 110. Nuclear Technologies and Services Which Contribute to the Production of Special Nuclear Material (Snm). Technologies Covered Include Nuclear Reactors...

  11. Integration of NASA Research into Undergraduate Education in Math, Science, Engineering and Technology at North Carolina A&T State University

    NASA Technical Reports Server (NTRS)

    Monroe, Joseph; Kelkar, Ajit

    2003-01-01

    The NASA PAIR program incorporated the NASA-Sponsored research into the undergraduate environment at North Carolina Agricultural and Technical State University. This program is designed to significantly improve undergraduate education in the areas of mathematics, science, engineering, and technology (MSET) by directly benefiting from the experiences of NASA field centers, affiliated industrial partners and academic institutions. The three basic goals of the program were enhancing core courses in MSET curriculum, upgrading core-engineering laboratories to compliment upgraded MSET curriculum, and conduct research training for undergraduates in MSET disciplines through a sophomore shadow program and through Research Experience for Undergraduates (REU) programs. Since the inception of the program nine courses have been modified to include NASA related topics and research. These courses have impacted over 900 students in the first three years of the program. The Electrical Engineering circuit's lab is completely re-equipped to include Computer controlled and data acquisition equipment. The Physics lab is upgraded to implement better sensory data acquisition to enhance students understanding of course concepts. In addition a new instrumentation laboratory in the department of Mechanical Engineering is developed. Research training for A&T students was conducted through four different programs: Apprentice program, Developers program, Sophomore Shadow program and Independent Research program. These programs provided opportunities for an average of forty students per semester.

  12. Computer Technologies for Postsecondary Students with Disabilities. Adaptech Project = Technologies Informatiques pour les Etudiants ayant des Incapacites au Postsecondaire. Project Adaptech.

    ERIC Educational Resources Information Center

    Fossey, Myrtis-Eirene; Fichten, Catherine S.; Barile, Maria; Asuncion, Jennison V.

    In 1999, a survey was conducted of almost 800 university students with different disabilities across Canada to investigate what computer equipment students used and wanted, how they financed their computer technologies, and why they failed to take advantage of government subsidy programs. Results from the survey indicate many students did not know…

  13. "Children's Health Care, Parts 1-4." Options in Education Takes Listeners to the Core of the Issues.

    ERIC Educational Resources Information Center

    George Washington Univ., Washington, DC. Inst. for Educational Leadership.

    The scripts of four programs of National Public Radio's Options in Education series are presented. The first program has sequences involving the use of high technology in childbirth. Interviews with doctors and expectant mothers explore the use and availability of electronic monitoring equipment in prenatal care. In the second program, the high…

  14. 49 CFR 1.86 - The Federal Motor Carrier Safety Administration.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., development, and technology transfer activities to promote safety of operation and equipment of motor vehicles for the motor carrier transportation program; and (f) Carrying out an effective communications and...

  15. 49 CFR 1.86 - The Federal Motor Carrier Safety Administration.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., development, and technology transfer activities to promote safety of operation and equipment of motor vehicles for the motor carrier transportation program; and (f) Carrying out an effective communications and...

  16. 49 CFR 1.86 - The Federal Motor Carrier Safety Administration.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., development, and technology transfer activities to promote safety of operation and equipment of motor vehicles for the motor carrier transportation program; and (f) Carrying out an effective communications and...

  17. US DOE Regional Test Centers Program - 2016 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stein, Joshua

    The US Department of Energy’s Regional Test Center (RTC) program provides outdoor validation and bankability data for innovative solar technologies at five sites across the US representing a range of climate conditions. Data helps get new technologies to market faster and improves US industry competitiveness. Managed by Sandia National Laboratories and the National Renewable Energy Laboratory (NREL), the RTC program partners with US manufacturers of photovoltaic (PV) technologies, including modules, inverters, and balance-of-system equipment. The study is collaborative, with manufacturers (also known as RTC industry partners) and the national labs working together on a system design and validation strategy thatmore » meets a clearly defined set of performance and reliability objectives.« less

  18. Volvo CE to expand driveline components and introduce new loader concept at bauma

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    2007-04-15

    This suppliers news report includes a description of Volvo CE's Graphic wheel loader which uses an electric hybrid power sources and is almost emissions free. Simulator training technology is proving its usefulness in establishing higher safety levels in the mining industry. Immersive Technologies Advanced Equipment training simulators are being used to train students at the Academy for Mine Training and Energy Technology in West Virginia. Geo-Explorer core drills manufactured by Multi-Power Products Ltd. of Canada have been purchased by the Pan African Mining Corp. One is to be assigned to the company's coal program where an extensive exploration program ismore » underway in the Sakoa area in Madagascar. A joint venture agreement has been announced between iPackets International and China's Henan YongAn Investment Guarantee Co. and China Coal Information Institute. Under the name GuoAn Mine Safety Communication System, iPacket's wireless communications software and equipment will be deployed in China's mining industry. 3 photos.« less

  19. Marginalized Student Access to Technology Education

    NASA Astrophysics Data System (ADS)

    Kurtcu, Wanda M.

    The purpose of this paper is to investigate how a teacher can disrupt an established curriculum that continues the cycle of inequity of access to science, technology, engineering, and math (STEM) curriculum by students in alternative education. For this paper, I will focus on the technology components of the STEM curriculum. Technology in the United States, if not the world economy, is developing at a rapid pace. Many areas of day to day living, from applying for a job to checking one's bank account online, involve a component of science and technology. The 'gap' in technology education is emphasized between the 'haves and have-nots', which is delineated along socio-economic lines. Marginalized students in alternative education programs use this equipment for little else than remedial programs and credit recovery. This level of inequity further widens in alternative education programs and affects the achievement of marginalized students in credit recovery or alternative education classes instead of participation technology classes. For the purposes of this paper I focus on how can I decrease the inequity of student access to 21st century technology education in an alternative education program by addressing the established curriculum of the program and modifying structural barriers of marginalized student access to a technology focused curriculum.

  20. Listing of New Bus Technology Applications

    DOT National Transportation Integrated Search

    1983-12-01

    The New Bus Equipment Introduction program is designed to demonstrate innovative features on transit buses and encourage the adoption of innovative features that enhance productivity. New bus demonstrations and purchases have been catalogued for the ...

  1. Dispensing Equipment Testing with Mid-Level Ethanol/Gasoline Test Fluid: Summary Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Boyce, K.; Chapin, J. T.

    The National Renewable Energy Laboratory's (NREL) Nonpetroleum-Based Fuel Task addresses the hurdles to commercialization of biomass-derived fuels and fuel blends. One such hurdle is the unknown compatibility of new fuels with current infrastructure, such as the equipment used at service stations to dispense fuel into automobiles. The U.S. Department of Energy's (DOE) Vehicle Technology Program and the Biomass Program have engaged in a joint project to evaluate the potential for blending ethanol into gasoline at levels higher than nominal 10 volume percent. This project was established to help DOE and NREL better understand any potentially adverse impacts caused by amore » lack of knowledge about the compatibility of the dispensing equipment with ethanol blends higher than what the equipment was designed to dispense. This report provides data about the impact of introducing a gasoline with a higher volumetric ethanol content into service station dispensing equipment from a safety and a performance perspective.« less

  2. 77 FR 35299 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-13

    ... require the use of heat pump technology to meet the minimum standard for electric storage water heaters... recently amended energy conservation standards for residential electric water heaters on utility programs that use high-storage-volume (above 55 gallons) electric storage water heaters to reduce peak...

  3. Notebooks, Handhelds, and Software in Physical Education (Grades 5-8)

    ERIC Educational Resources Information Center

    Mohnsen, Bonnie

    2005-01-01

    Heart monitors, pedometers, and now virtual reality-based equipment (e.g., Cyberbikes, "Dance Dance Revolution") have been embraced by physical educators as technologies worth using in the physical education program; however, the use of computers (be it a desktop, notebook, or handheld) in the physical education instructional program, has not been…

  4. Apollo Program Summary Report: Synopsis of the Apollo Program Activities and Technology for Lunar Exploration

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Overall program activities and the technology developed to accomplish lunar exploration are discussed. A summary of the flights conducted over an 11-year period is presented along with specific aspects of the overall program, including lunar science, vehicle development and performance, lunar module development program, spacecraft development testing, flight crew summary, mission operations, biomedical data, spacecraft manufacturing and testing, launch site facilities, equipment, and prelaunch operations, and the lunar receiving laboratory. Appendixes provide data on each of the Apollo missions, mission type designations, spacecraft weights, records achieved by Apollo crewmen, vehicle histories, and a listing of anomalous hardware conditions noted during each flight beginning with Apollo 4.

  5. [Optimization of education for laparoendoscopic technologies in Ukraine].

    PubMed

    Lesovoĭ, V N; Savenkov, V I; Tomin, M S

    2014-09-01

    International experience of training of surgeons, including urologists, in laparoendoscopic technologies, was analyzed. Practical course "The Fundamentals of aparoscopic Surgery" (FLS) and the European program of education for basic laparoscopic urologic skills (E-BLUS), which are used in specialized centers, constitute a standard programs of development of basic endosurgical skills. Such centers in Ukraine are absent. The project of complex system of a simulating education, testing and certification of surgeons, who are trained in endovideosurgical technologies, is proposed. While performing surveying of Ukrainian surgeons there were revealed the problems in a process of their education and introduction of highly technological methods: insufficient equipment with modern apparatuses, absence of a standardized pro- gram of education. The staged program of education was elaborated, taking into account progressive international experience and adopted to our environment and con ditions.

  6. Modifications of ORNL's computer programs MSF-21 and VTE-21 for the evaluation and rapid optimization of multistage flash and vertical tube evaporators

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Glueckstern, P.; Wilson, J.V.; Reed, S.A.

    1976-06-01

    Design and cost modifications were made to ORNL's Computer Programs MSF-21 and VTE-21 originally developed for the rapid calculation and design optimization of multistage flash (MSF) and multieffect vertical tube evaporator (VTE) desalination plants. The modifications include additional design options to make possible the evaluation of desalting plants based on current technology (the original programs were based on conceptual designs applying advanced and not yet proven technological developments and design features) and new materials and equipment costs updated to mid-1975.

  7. Proceedings of the 1997 oil heat technology conference and workshop

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDonald, R.J.

    1997-09-01

    This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference weremore » to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.« less

  8. Pilot Field Demonstration of Alternative Fuels in Force Projection Petroleum and Water Distribution Equipment

    DTIC Science & Technology

    2014-09-04

    They included two Force Projection Technology (FPT) diesel driven pumping assemblies of 350 and 600 gallons per minute (GPM), and the Advanced...Army Tank Automotive Research Development and Engineering Center (TARDEC). They included two Force Projection Technology (FPT) diesel driven...research programs. The first two systems identified were Force Projection Technology (FPT) diesel -driven pumping assemblies of 350 and 600 gallons per

  9. Technology Use by Pre-Service Teachers during Teaching Practice: Are New Teachers Embracing Technology Right Away in Their First Teaching Experience?

    ERIC Educational Resources Information Center

    Batane, Tshepo; Ngwako, Abraham

    2017-01-01

    Equipping pre-service teachers with technology skills and knowledge is now regarded as a vital element of any teacher-training program so as to capacitate the new teachers to meet the educational demands of the twenty-first century. Therefore, it is important to establish whether these teachers do actually apply these skills when they first get to…

  10. Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

    NASA Astrophysics Data System (ADS)

    Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

    Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

  11. Defense Systems Modernization and Sustainment Initiative

    DTIC Science & Technology

    2014-03-31

    research programs focus on sustainable production, sustainable energy, sustainable mobility , and ecologically friendly information technology systems...for Sustainable Mobility (CSM): focused on developing viable technologies for sustainable transportation systems and the support of complex equipment...utilization of mobile devices. The objective of the evaluation was to identify features that the new implementation of LEEDS would require, such as

  12. National Commission on New Technological Uses of Copyrighted Works, Meeting Number Six (Arlington, Virginia, May 6, 1976).

    ERIC Educational Resources Information Center

    Library of Congress, Washington, DC. Copyright Office.

    With its sixth meeting, the National Commission on New Technological Uses of Copyrighted Works (CONTU) switched from substance to verbatim minutes. The first report, made by the president of the Computer and Business Equipment Manufacturers Association, dealt with the copyrightability or patentability of computer programs, protecting investments…

  13. SAT's infrared equipment using second-generation detectors

    NASA Astrophysics Data System (ADS)

    Siriex, Michel B.

    1995-09-01

    In 1982 SAT proposed for the first time a second generation detector in the design of FLIRs for the TRIGAT program, since then different types of IR equipment have been developed on the basis of this technology: (1) An infra-red seeker for the MICA missile. (2) Three types of IRST: VAMPIR MB for naval applications, SIRENE for the Army and OSF for the Rafale aircraft. (3) Three thermal imagers: Condor 1 for the mast mounted sight equipping the long range anti tank system, Tiger installed on the sight of the medium range antitank system, and Condor 2 for the pilot sight of the TRIGAT French-German helicopter. Infra-red detectors are MCT IR-CCD focal plane arrays developed by SOFRADIR with the objective of the best standardization possible in spite of different configurations and specifications for each program. In this paper, we intend to present the main features of this technology for these programs and the advantages obtained by comparison with the first generation in terms of performance. Industrialization of these products is starting now, and a specific effort has been made to standardize the components, especially the driving and read out electronics. A set of ASICs has been developed to make compact detection modules including a detector in his dewar, a cooling machine, and a proximity electronic.

  14. Refinement of Foam Backfill Technology for Expedient Airfield Damage Repair; Phase 2: Development of Prototype Foam Dispensing Equipment and Improved Tactics, Techniques and Procedures

    DTIC Science & Technology

    2017-12-01

    respective owners. The findings of this report are not to be construed as an official Department of the Army position unless so designated by other...2 2 Prototype Equipment Design ...Program Manager was Mr. Jeb S. Tingle. This work was performed by the Airfields and Pavements Branch (APB) of the Engineering Systems and Materials

  15. Intelligent Processing Equipment Research and Development Programs of the Department of Commerce

    NASA Technical Reports Server (NTRS)

    Simpson, J. A.

    1992-01-01

    The intelligence processing equipment (IPE) research and development (R&D) programs of the Department of Commerce are carried out within the National Institute of Standards and Technology (NIST). This institute has had work in support of industrial productivity as part of its mission since its founding in 1901. With the advent of factory automation these efforts have increasingly turned to R&D in IPE. The Manufacturing Engineering Laboratory (MEL) of NIST devotes a major fraction of its efforts to this end while other elements within the organization, notably the Material Science and Engineering Laboratory, have smaller but significant programs. An inventory of all such programs at NIST and a representative selection of projects that at least demonstrate the scope of the efforts are presented.

  16. Design of a medical and laboratory equipment management program for the new standards certification achievement in Mexico.

    PubMed

    Franco-Clark, D; Pimentel-Aguilar, A B; Rodriguez-Vera, R

    2010-01-01

    Certification for healthcare institutions in Mexico is ruled by 2009 standards homologated with the Joint Commission International criteria. Nowadays, healthcare requires of medical equipment and devices, so it has become necessary to implement guidelines for its adequate management in order to reach the highest level of quality and safety at the lowest cost. The objective of this work was to develop a Medical and Laboratory Equipment Management Program, oriented to the improvement of quality, effectiveness and efficiency of the technological resources in order to meet the certification requirements. The result of this work allows to have an auto evaluation tool that focuses the efforts of the National Institute for Respiratory Diseases to the achievement of the new requirements established for the certification.

  17. The Tanzania experience: clinical laboratory testing harmonization and equipment standardization at different levels of a tiered health laboratory system.

    PubMed

    Massambu, Charles; Mwangi, Christina

    2009-06-01

    The rapid scale-up of the care and treatment programs in Tanzania during the preceding 4 years has greatly increased the demand for quality laboratory services for diagnosis of HIV and monitoring patients during antiretroviral therapy. Laboratory services were not in a position to cope with this demand owing to poor infrastructure, lack of human resources, erratic and/or lack of reagent supply and commodities, and slow manual technologies. With the limited human resources in the laboratory and the need for scaling up the care and treatment program, it became necessary to install automated equipment and train personnel for the increased volume of testing and new tests across all laboratory levels. With the numerous partners procuring equipment, the possibility of a multitude of equipment platforms with attendant challenges for procurement of reagents, maintenance of equipment, and quality assurance arose. Tanzania, therefore, had to harmonize laboratory tests and standardize laboratory equipment at different levels of the laboratory network. The process of harmonization of tests and standardization of equipment included assessment of laboratories, review of guidelines, development of a national laboratory operational plan, and stakeholder advocacy. This document outlines this process.

  18. The Best Workout on Earth, and in Space

    NASA Technical Reports Server (NTRS)

    2001-01-01

    SpiraFlex(R) is a revolutionary new patented technology for storing and delivering mechanical power in industrial, consumer, and fitness equipment. NASA research facilities and funding helped to develop the "Resistance Exercise Device" (RED), powered by SpiraFlex. SpiraFlex duplicates the benefits of free-weights in a lightweight, portable, and safe system. The RED system is presently aboard the International Space Station (ISS) and is used by the crewmembers as a primary countermeasure against musculoskeletal degradation caused by microgravity. Using SpiraFlex technology, Schwinn Cycling & Fitness, Inc., of Boulder, Colorado, launched an international fitness program for health clubs and select retail distributors, called RiPP(TM) (Resistance Performance Program). RiPP is an exercise program that uses RiPP Pro machines, powered by SpiraFlex technology.

  19. Data Acquisition Systems

    NASA Technical Reports Server (NTRS)

    1994-01-01

    In the mid-1980s, Kinetic Systems and Langley Research Center determined that high speed CAMAC (Computer Automated Measurement and Control) data acquisition systems could significantly improve Langley's ARTS (Advanced Real Time Simulation) system. The ARTS system supports flight simulation R&D, and the CAMAC equipment allowed 32 high performance simulators to be controlled by centrally located host computers. This technology broadened Kinetic Systems' capabilities and led to several commercial applications. One of them is General Atomics' fusion research program. Kinetic Systems equipment allows tokamak data to be acquired four to 15 times more rapidly. Ford Motor company uses the same technology to control and monitor transmission testing facilities.

  20. CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

    ERIC Educational Resources Information Center

    BEAUMONT, JOHN A; AND OTHERS

    DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

  1. 2005 Mississippi Curriculum Framework: Secondary Vehicle and Mobile Equipment Technician. (Program CIP: 47.0699 - Vehicle Maintenance and Repair Technology, Other)

    ERIC Educational Resources Information Center

    Brackeen, Scott; Freeman, Roscoe; Tiblier, Chris; Batton, James; Ealy, Houston; Simmons, Gerald

    2005-01-01

    Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

  2. More than Money: We Profile Three Corporate Foundations Bringing Technology-Based Programs Directly to Schools' Doorsteps

    ERIC Educational Resources Information Center

    Technology & Learning, 2005

    2005-01-01

    Philanthropy provides billions of dollars to schools and educational programs each year. Much of this cash comes from corporate America, who views contributing to education as an important way to give back to the community. While many companies support education directly via equipment, money grants, and professional development, other companies…

  3. Computer Technology for Industry

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Shell Oil Company used a COSMIC program, called VISCEL to insure the accuracy of the company's new computer code for analyzing polymers, and chemical compounds. Shell reported that there were no other programs available that could provide the necessary calculations. Shell produces chemicals for plastic products used in the manufacture of automobiles, housewares, appliances, film, textiles, electronic equipment and furniture.

  4. 75 FR 41845 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Decision and Order...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-19

    ... conditioners and heat pumps. The waiver is specific to the Sanyo variable capacity ECO-i (commercial) multi... in this notice to test and rate its ECO-i multi-split products. DATES: This Decision and Order is..., Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington, DC 20585-0121...

  5. Data Fusion Based on Optical Technology for Observation of Human Manipulation

    NASA Astrophysics Data System (ADS)

    Falco, Pietro; De Maria, Giuseppe; Natale, Ciro; Pirozzi, Salvatore

    2012-01-01

    The adoption of human observation is becoming more and more frequent within imitation learning and programming by demonstration approaches (PbD) to robot programming. For robotic systems equipped with anthropomorphic hands, the observation phase is very challenging and no ultimate solution exists. This work proposes a novel mechatronic approach to the observation of human hand motion during manipulation tasks. The strategy is based on the combined use of an optical motion capture system and a low-cost data glove equipped with novel joint angle sensors, based on optoelectronic technology. The combination of the two information sources is obtained through a sensor fusion algorithm based on the extended Kalman filter (EKF) suitably modified to tackle the problem of marker occlusions, typical of optical motion capture systems. This approach requires a kinematic model of the human hand. Another key contribution of this work is a new method to calibrate this model.

  6. NASA Advanced Refrigerator/Freezer Technology Development Project Overview

    NASA Technical Reports Server (NTRS)

    Cairelli, J. E.

    1995-01-01

    NASA Lewis Research Center (LeRC) has recently initiated a three-year project to develop the advanced refrigerator/freezer (R/F) technologies needed to support future life and biomedical sciences space experiments. Refrigerator/freezer laboratory equipment, most of which needs to be developed, is enabling to about 75 percent of the planned space station life and biomedical science experiments. These experiments will require five different classes of equipment; three storage freezers operating at -20 C, -70 C and less than 183 C, a -70 C freeze-dryer, and a cryogenic (less than 183 C) quick/snap freezer. This project is in response to a survey of cooling system technologies, performed by a team of NASA scientists and engineers. The team found that the technologies, required for future R/F systems to support life and biomedical sciences spaceflight experiments, do not exist at an adequate state of development and concluded that a program to develop the advanced R/F technologies is needed. Limitations on spaceflight system size, mass, and power consumption present a significant challenge in developing these systems. This paper presents some background and a description of the Advanced R/F Technology Development Project, project approach and schedule, general description of the R/F systems, and a review of the major R/F equipment requirements.

  7. Data Acquisition Systems

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Technology developed during a joint research program with Langley and Kinetic Systems Corporation led to Kinetic Systems' production of a high speed Computer Automated Measurement and Control (CAMAC) data acquisition system. The study, which involved the use of CAMAC equipment applied to flight simulation, significantly improved the company's technical capability and produced new applications. With Digital Equipment Corporation, Kinetic Systems is marketing the system to government and private companies for flight simulation, fusion research, turbine testing, steelmaking, etc.

  8. Driving Extreme Efficiency to Market

    NASA Astrophysics Data System (ADS)

    Garbesi, Karina

    2014-03-01

    The rapid development of extremely energy efficient appliances and equipment is essential to curtail catastrophic climate disruption. This will require the on-going development of products that apply all best-practices and that take advantage of the synergies of hybridization and building integration. Beyond that, it requires the development of new disruptive technologies and concepts. To facilitate these goals, in 2011 the Lawrence Berkeley National Laboratory and the U.S. Department of Energy launched the Max Tech and Beyond Design Competition for Ultra-Low-Energy-Use Appliances and Equipment. Now in its third year, the competition supports faculty-lead student design teams at U.S. universities to develop and test new technology prototypes. This talk describes what the competition and the Max Tech Program are doing to drive such rapid technology progress and to facilitate the entry to the market of successful Max Tech prototypes. The talk also initiates a discussion of physicists' unique role in driving that technology progress faster and farther. Emerging Technologies, Building Technologies Office, U.S. Department of Energy.

  9. An Overview of the NASA Aerospace Flight Battery Systems Program

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle

    2003-01-01

    Develop an understanding of the safety issues relating to space use and qualification of new Li-Ion technology for manned applications. Enable use of new technology batteries into GFE equipment - laptop computers, camcorders. Establish a data base for an optimized set of cells (and batteries) exhibiting acceptable performance and abuse characteristics for utilization as building blocks for numerous applications.

  10. Fostering Students' 21st Century Skills through Project Oriented Problem Based Learning (POPBL) in Integrated STEM Education Program

    ERIC Educational Resources Information Center

    Wan Husin, Wan Nor Fadzilah; Mohamad Arsad, Nurazidawati; Othman, Oziah; Halim, Lilia; Rasul, Mohamad Sattar; Osman, Kamisah; Iksan, Zanaton

    2016-01-01

    Students nowadays need to be equipped with twenty first century skills in order to ensure their competitiveness in this era of globalization, especially in the science and technology sector. Therefore, this study aimed to identify the changes of 21st century skills among students after participating in an integrated Science, Technology,…

  11. 2007 Mississippi Curriculum Framework: Postsecondary Small Engine and Turf Equipment Repair Technology. (Program CIP: 01.0299 Agricultural Mechanization, Other )

    ERIC Educational Resources Information Center

    Spence, Allen; Campus, Raymond

    2007-01-01

    As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

  12. Education Program for Ph.D. Course to Cultivate Literacy and Competency

    NASA Astrophysics Data System (ADS)

    Yokono, Yasuyuki; Mitsuishi, Mamoru

    The program aims to cultivate internationally competitive young researchers equipped with Fundamental attainment (mathematics, physics, chemistry and biology, and fundamental social sciences) , Specialized knowledge (mechanical dynamics, mechanics of materials, hydrodynamics, thermodynamics, design engineering, manufacturing engineering and material engineering, and bird‧s-eye view knowledge on technology, society and the environment) , Literacy (Language, information literacy, technological literacy and knowledge of the law) and Competency (Creativity, problem identification and solution, planning and execution, self-management, teamwork, leadership, sense of responsibility and sense of duty) to become future leaders in industry and academia.

  13. Zinc-oxygen battery development program

    NASA Technical Reports Server (NTRS)

    Bourland, Deborah S.

    1991-01-01

    The purpose of this Zinc-Oxygen development program is to incorporate the improved air/oxygen cathode and zinc anode technology developed in recent years into relatively large cells (150-200 amp/hr, 25-100 hour rate) and smaller high rate cells (9-12 amp/hr, 3-12 hour rate). Existing commercial cells manufactured by Duracell and Rayovac are currently being utilized on the Space Shuttle Orbiter in a mini-oscilloscope, the crew radio, and other crew equipment. These applications provide a basis for other Orbiter systems that require portable, storable, electrical power as well as emergency power for the Space Station major payload systems power and for Space Station equipment applications.

  14. Best practices and strategies for improving rail energy efficiency

    DOT National Transportation Integrated Search

    2014-01-28

    In support of the FRA Energy, Environment, and Engine (E3) program, this study reviews and evaluates technology development opportunities, equipment upgrades, and best practices (BPs) of international and U.S. passenger and freight rail industry segm...

  15. 49 CFR 268.1 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM Overview § 268.1 Definitions. As..., including land, piers, guideways, propulsion equipment and other components attached to guideways, power... described in § 268.3. Maglev means transportation systems employing magnetic levitation that would be...

  16. Regional fare policy and fare allocation, innovations in fare equipment and data collection

    DOT National Transportation Integrated Search

    2010-03-01

    This report documents recent experiences related to regional fare programs in the United States, with an emphasis on institutional arrangements, technological impacts, customer acceptance, data processing enhancements, and costs and benefits. Five ca...

  17. Superhydrophobic powder additives to enhance chemical agent resistant coating systems for military equipment for the U.S. Marine Corps (USMC) Corrosion Prevention and Control (CPAC) Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pawel, Steven J.; Armstrong, Beth L.; Haynes, James A.

    The primary goal of the CPAC program at ORNL was to explore the feasibility of introducing various silica-based superhydrophobic (SH) powder additives as a way to improve the corrosion resistance of US Department of Defense (DOD) military-grade chemical agent resistant coating (CARC) systems. ORNL had previously developed and patented several SH technologies of interest to the USMC, and one of the objectives of this program was to identify methods to incorporate these technologies into the USMC’s corrosion-resistance strategy. This report discusses findings of the CPAC and their application.

  18. Demonstration of the Low-Cost Virtual Collaborative Environment (VCE)

    NASA Technical Reports Server (NTRS)

    Bowers, David; Montes, Leticia; Ramos, Angel; Joyce, Brendan; Lumia, Ron

    1997-01-01

    This paper demonstrates the feasibility of a low-cost approach of remotely controlling equipment. Our demonstration system consists of a PC, the PUMA 560 robot with Barrett hand, and commercially available controller and teleconferencing software. The system provides a graphical user interface which allows a user to program equipment tasks and preview motions i.e., simulate the results. Once satisfied that the actions are both safe and accomplish the task, the remote user sends the data over the Internet to the local site for execution on the real equipment. A video link provides visual feedback to the remote sight. This technology lends itself readily to NASA's upcoming Mars expeditions by providing remote simulation and control of equipment.

  19. The IHS diagnostic X-ray equipment radiation protection program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Knapp, A.; Byrns, G.; Suleiman, O.

    The Indian Health Service (IHS) operates or contracts with Tribal groups to operate 50 hospitals and approximately 165 primary ambulatory care centers. These facilities contain approximately 275 medical and 800 dental diagnostic x-ray machines. IHS environmental health personnel in collaboration with the Food and Drug Administration's (FDA) Center for Devices and Radiological Health (CDRH) developed a diagnostic x-ray protection program including standard survey procedures and menu-driven calculations software. Important features of the program include the evaluation of equipment performance collection of average patient entrance skin exposure (ESE) measurements for selected procedures, and quality assurance. The ESE data, collected using themore » National Evaluation of X-ray Trends (NEXT) protocol, will be presented. The IHS Diagnostic X-ray Radiation Protection Program is dynamic and is adapting to changes in technology and workload.« less

  20. Best Practices for Optimizing DoD Contractor Safety and Occupational Health Program Performance

    DTIC Science & Technology

    2012-12-01

    such as Accident Prevention Plan (APP), Activity Hazard Analysis (AHA), Quality Assurance Surveillance Plans (QASP), etc. Contract administration...technology support, medical , and maintenance of equipment and facilities. The DoD Guidebook for the Acquisition of Services, provides acquisition...OSHA regulations and perform in accordance with an applicable accident prevention program that complies with State and Federal requirements. The

  1. Robot Programming.

    DTIC Science & Technology

    1982-12-01

    Paris, France, June, 1982, 519-530. Latoinbe, J. C. "Equipe Intelligence Artificielle et Robotique: Etat d’avancement des recherches," Laboratoire...8217AD-A127 233 ROBOT PROGRRMMING(U) MASSACHUSETTS INST OFGTECHi/ CAMBRIDGE ARTIFICIAL INTELLIGENCE LAB T LOZANO-PEREZ UNCLASSIFIED DC8 AI-9 N884...NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Artificial Intelligence Laboratory AREA I WORK UNIT NUMBERS ,. 545 Technology Square Cambridge

  2. Surveying the elements of successful infrared predictive maintenance programs

    NASA Astrophysics Data System (ADS)

    Snell, John R., Jr.; Spring, Robert W.

    1991-03-01

    This paper summarizes the results of a survey of over three hundred maintenance personnel who use imaging equipment within their company or organization. All had previously participated in one or more of our training programs. The companies took in a broad range of industry, including, among other, power generation, pulp and paper, metals, mining, petrochemical, automotive and general manufacturing. The organizations were mainly quite large, either commercial or public, and included governmental agencies, military, colleges and universities, municipalities, and utilities. Although we had a very tight time line for the survey, we were pleased to have a 15% response rate. The results show that some of the causes of success and failure in infrared programs are not unlike those associated with any type of program in an organizational structure, i.e. the need for accurate and timely communications; justification requirements; etc. Another set of problems was shared more closely with other startup maintenance technologies (for example, vibration monitoring), such as the need for trending data; providing appropriate technical training; achieving reproducible results; etc. Finally, some of the driving mechanisms are more specific to this technology, such as re-designing equipment so that it can be thermally inspected; establishing effective documentation strategies; etc.

  3. Corps of Engineers National Automation Team (CENAT) Technology Transfer Test Bed (T(3)B) Demonstration of the Design 4D Program

    DTIC Science & Technology

    1989-11-01

    other design tools. RESULTS OF TEST/DEMONSTRATION: Training for the Design 4D Program was conducted at USACERL. Although nearly half of the test...subjects had difficulty with the prompts, their understanding of the program improved after experimenting with the commands. After training , most felt...Equipment Testing Process 3 TEST DISTRICT TRAINING ........................................... 10 Training Process Post Training Survey Post Training

  4. Qualification of Electrical Ground Support Equipment for New Space Programs

    NASA Technical Reports Server (NTRS)

    SotoToro, Felix A.; Vu, Bruce T.; Hamilton, Mark S.

    2011-01-01

    With the Space Shuttle program coming to an end, the National Aeronautics and Space Administration (NASA) is moving to a new space flight program that will allow expeditions beyond low earth orbit. The space vehicles required to comply with these missions will be carrying heavy payloads. This implies that the Earth departure stage capabilities must be of higher magnitudes, given the current propulsion technology. The engineering design of the new flight hardware comes with some structural, thermal, propulsion and other subsystems' challenges. Meanwhile, the necessary ground support equipment (GSE) used to test, validate, verify and process the flight hardware must withstand the new program specifications. This paper intends to provide the qualification considerations during implementation of new electrical GSE for space programs. A team of engineers was formed to embark on this task, and facilitate the logistics process and ensure that the electrical, mechanical and fluids subsystems conduct the proper level of testing. Ultimately, each subsystem must certify that each piece of ground support equipment used in the field is capable of withstanding the strenuous vibration, acoustics, environmental, thermal and Electromagnetic Interference (EMf) levels experienced during pre-launch, launch and post-launch activities. The benefits of capturing and sharing these findings will provide technical, cost savings and schedule impacts infon11ation to both the technical and management community. Keywords: Qualification; Testing; Ground Support Equipment; Electromagnetic Interference Testing; Vibration Testing; Acoustic Testing; Power Spectral Density.

  5. Dual-Shaft Electric Propulsion (DSEP) Technology Development Program

    NASA Astrophysics Data System (ADS)

    1992-08-01

    The background, progress, and current state of the DOE-sponsored Advanced Dual-Shaft Electric Propulsion Technology Development are presented. Three electric-drive vehicles were build as conversions of a commercial gasoline-powered van, using program-designed components and systems as required. The vehicles were tested primarily on dynamometer or test tract. Component and system testing represented a major portion of the development effort. Test data are summarized in this report, and an Appendix contains the final component design specifications. This major programmatic concerns were the traction battery, the battery management system, the dc-to-ac inverter, the drive motor, the transaxle and its ancillary equipment, and the vehicle controller. Additional effort was devoted to vehicle-related equipment: gear selector, power steering, power brakes, accelerator, dashboard instrumentation, and heater. Design, development, and test activities are reported for each of these items, together with an appraisal (lessons learned) and recommendations for possible further work. Other programmatic results include a Cost and Commercialization Analysis, a Reliability and Hazards Analysis Study, Technical Recommendations for Next-Generation Development, and an assessment of overall program efforts.

  6. Rail Safety/Equipment Crashworthiness : Volume 1. A Systems Analysis of Injury Minimization in Rail Systems

    DOT National Transportation Integrated Search

    1978-07-01

    The Department of Transportation, Transportation Systems Center (TSC), is providing technical assistance to the Federal Railroad Administration (FRA) in a program to improve railroad safety and efficiency by providing a technological basis for improv...

  7. Alternative Fuels Data Center

    Science.gov Websites

    jobs, economic growth, tax relief, improvements in education and healthcare, infrastructure of alternative fuel and advanced vehicle technologies through grant programs, tax credits, research Section 1123 amends the alternative fuel infrastructure tax credit for qualified equipment placed into

  8. Technician Program Uses Advanced Instruments.

    ERIC Educational Resources Information Center

    Stinson, Stephen

    1981-01-01

    Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

  9. Environmental Technology Verification Coatings and Coating Equipment Program (ETV CCEP). High Transfer Efficiency Spray Equipment - Generic Verification Protocol (Revision 0)

    DTIC Science & Technology

    2006-09-30

    High-Pressure Waterjet • CO2 Pellet/Turbine Wheel • Ultrahigh-Pressure Waterjet 5 Process Water Reuse/Recycle • Cross-Flow Microfiltration ...documented on a process or laboratory form. Corrective action will involve taking all necessary steps to restore a measuring system to proper working order...In all cases, a nonconformance will be rectified before sample processing and analysis continues. If corrective action does not restore the

  10. A Probabilistic Assessment of NASA Ultra-Efficient Engine Technologies for a Large Subsonic Transport

    NASA Technical Reports Server (NTRS)

    Tong, Michael T.; Jones, Scott M.; Arcara, Philip C., Jr.; Haller, William J.

    2004-01-01

    NASA's Ultra Efficient Engine Technology (UEET) program features advanced aeropropulsion technologies that include highly loaded turbomachinery, an advanced low-NOx combustor, high-temperature materials, intelligent propulsion controls, aspirated seal technology, and an advanced computational fluid dynamics (CFD) design tool to help reduce airplane drag. A probabilistic system assessment is performed to evaluate the impact of these technologies on aircraft fuel burn and NOx reductions. A 300-passenger aircraft, with two 396-kN thrust (85,000-pound) engines is chosen for the study. The results show that a large subsonic aircraft equipped with the UEET technologies has a very high probability of meeting the UEET Program goals for fuel-burn (or equivalent CO2) reduction (15% from the baseline) and LTO (landing and takeoff) NOx reductions (70% relative to the 1996 International Civil Aviation Organization rule). These results are used to provide guidance for developing a robust UEET technology portfolio, and to prioritize the most promising technologies required to achieve UEET program goals for the fuel-burn and NOx reductions.

  11. Index to NASA Tech Briefs, 1974

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The following information was given for 1974: (1) abstracts of reports dealing with new technology derived from the research and development activities of NASA or the U.S. Atomic Energy Commission, arranged by subjects: electronics/electrical, electronics/electrical systems, physical sciences, materials/chemistry, life sciences, mechanics, machines, equipment and tools, fabrication technology, and computer programs, (2) indexes for the above documents: subject, personal author, originating center.

  12. Energy conservation through sealing technology

    NASA Technical Reports Server (NTRS)

    Stair, W. K.; Ludwig, L. P.

    1978-01-01

    Improvements in fluid film sealing resulting from a proposed research program could lead to an annual energy saving, on a national basis, equivalent to about 37 million bbl of oil or 0.3% of the total U.S. energy consumption. Further, the application of known sealing technology can result in an annual saving of an additional 10 million bbl of oil. The energy saving would be accomplished by reduction in process heat energy loss, reduction of frictional energy generated, and minimization of energy required to operate ancillary equipment associated with the seal system. In addition to energy saving, cost effectiveness is further enhanced by reduction in maintenance and in minimization of equipment for collecting leakage and for meeting environmental pollution standards.

  13. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Raymond, David W.; Gaither, Katherine N.; Polsky, Yarom

    Sandia National Laboratories (Sandia) has a long history in developing compact, mobile, very high-speed drilling systems and this technology could be applied to increasing the rate at which boreholes are drilled during a mine accident response. The present study reviews current technical approaches, primarily based on technology developed under other programs, analyzes mine rescue specific requirements to develop a conceptual mine rescue drilling approach, and finally, proposes development of a phased mine rescue drilling system (MRDS) that accomplishes (1) development of rapid drilling MRDS equipment; (2) structuring improved web communication through the Mine Safety & Health Administration (MSHA) web site;more » (3) development of an improved protocol for employment of existing drilling technology in emergencies; (4) deployment of advanced technologies to complement mine rescue drilling operations during emergency events; and (5) preliminary discussion of potential future technology development of specialized MRDS equipment. This phased approach allows for rapid fielding of a basic system for improved rescue drilling, with the ability to improve the system over time at a reasonable cost.« less

  14. GENERIC VERIFICATION PROTOCOL: DISTRIBUTED GENERATION AND COMBINED HEAT AND POWER FIELD TESTING PROTOCOL

    EPA Science Inventory

    This report is a generic verification protocol by which EPA’s Environmental Technology Verification program tests newly developed equipment for distributed generation of electric power, usually micro-turbine generators and internal combustion engine generators. The protocol will ...

  15. 47 CFR 0.111 - Functions of the Bureau.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Engineering and Technology has shared responsibility for radiofrequency equipment and device complaints. (5... complaints regarding the broadcast and cable television children's television programming commercial limits contained in section 102 of the Children's Television Act. Note to paragraph (a)(8): The Media Bureau has...

  16. 47 CFR 0.111 - Functions of the Bureau.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Engineering and Technology has shared responsibility for radiofrequency equipment and device complaints. (5... complaints regarding the broadcast and cable television children's television programming commercial limits contained in section 102 of the Children's Television Act. Note to paragraph (a)(8): The Media Bureau has...

  17. Electromechanical Componentry. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Lindemann, Don

    This training module on electromechanical components contains 10 units for a two-year vocational program packaging system equipment control course at Wisconsin Indianhead Technical College. This module describes the functions of electromechanical devices essential for understanding input/output devices for Programmable Logic Control (PLC)…

  18. 40 CFR 63.1105 - Transfer racks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Transfer racks. 63.1105 Section 63.1105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... Technology Standards § 63.1105 Transfer racks. (a) Design requirements. The owner or operator shall equip...

  19. IFLA General Conference, 1989. Division of Management and Technology. Section on Conservation; Section on Information Technology; Section on Library Buildings and Equipment; Section on Statistics; Round Table on Audiovisual Media; Round Table for the Management of Library Associations. Booklet 60.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    There are 15 papers in this collection from the Division of Management and Technology: (1) "Les Activites de formation dans les centres regionaux du Programme PAC" (Training Activities in the Regional Centers of the Preservation and Conservation Program) (Jean-Marie Arnoult); (2) "Professional Education for Preservation: An Overview" (John…

  20. High Efficiency Solar Integrated Roof Membrane Product

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Partyka, Eric; Shenoy, Anil

    2013-05-15

    This project was designed to address the Solar Energy Technology Program objective, to develop new methods to integrate photovoltaic (PV) cells or modules within a building-integrated photovoltaic (BIPV) application that will result in lower installed cost as well as higher efficiencies of the encapsulated/embedded PV module. The technology assessment and development focused on the evaluation and identification of manufacturing technologies and equipment capable of producing such low-cost, high-efficiency, flexible BIPV solar cells on single-ply roofing membranes.

  1. Industrial energy-efficiency improvement program

    NASA Astrophysics Data System (ADS)

    1980-12-01

    The industrial energy efficiency improvement program to accelerate market penetration of new and emerging industrial technologies is described. Practices which will improve energy efficiency, encourage substitution of more plentiful domestic fuels, and enhance recovery of energy and materials from industrial waste streams are enumerated. Specific reports from the chemicals and allied products; primary metals; petroleum and coal products; stone, clay, and glass, paper and allied products; food and kindred products; fabricated metals; transportation equipment; machinery (except electrical); textile mill products; rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products are discussed. A summary on progress in the utilization of recovered materials, and an analysis of industrial fuel mix is presented.

  2. Terminal configured vehicle program: Test facilities guide

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The terminal configured vehicle (TCV) program was established to conduct research and to develop and evaluate aircraft and flight management system technology concepts that will benefit conventional take off and landing operations in the terminal area. Emphasis is placed on the development of operating methods for the highly automated environment anticipated in the future. The program involves analyses, simulation, and flight experiments. Flight experiments are conducted using a modified Boeing 737 airplane equipped with highly flexible display and control equipment and an aft flight deck for research purposes. The experimental systems of the Boeing 737 are described including the flight control computer systems, the navigation/guidance system, the control and command panel, and the electronic display system. The ground based facilities used in the program are described including the visual motion simulator, the fixed base simulator, the verification and validation laboratory, and the radio frequency anechoic facility.

  3. In Brief: Funding authorized for U.S. science and technology education

    NASA Astrophysics Data System (ADS)

    Kumar, Mohi

    2007-08-01

    The ``America Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science Act,'' a bill that authorizes $33.6 billion for science, technology, engineering, and math education, was signed into law by U.S President George W. Bush on 9 August. The bill, sponsored by the U.S. House Science and Technology Committee, will distribute these funds to programs supported by the federal government over the next three fiscal years. Aimed at strengthening teacher preparedness in primary and secondary schools, equipping high school students for technologically oriented jobs, and enhancing higher-level academic research programs, the bill sets the budgets at the National Institute of Standards and Technology, the National Science Foundation, and the Department of Energy on a path toward doubling within the next decade. For more information, see http://science.house.gov/legislation/leg_highlights_detail.aspx?NewsID=1938.

  4. Aeromechanics and man-machine integration technology opportunities for rotorcraft of the 1990s and beyond

    NASA Technical Reports Server (NTRS)

    Kerr, Andrew W.

    1989-01-01

    Programs related to rotorcraft aeromechanics and man-machine integration are discussed which will support advanced army rotorcraft design. In aeromechanics, recent advances in computational fluid dynamics will be used to characterize the complex unsteady flowfields of rotorcraft, and a second-generation comprehensive helicopter analysis system will be used along with models of aerodynamics, engines, and control systems to study the structural dynamics of rotor/body configurations. The man-machine integration program includes the development of advanced cockpit design technology and the evaluation of cockpit and mission equipment concepts in a real-time full-combat environment.

  5. Space station experiment definition: Long-term cryogenic fluid storage

    NASA Technical Reports Server (NTRS)

    Jetley, R. L.; Scarlotti, R. D.

    1987-01-01

    The conceptual design of a space station Technology Development Mission (TDM) experiment to demonstrate and evaluate cryogenic fluid storage and transfer technologies is presented. The experiment will be deployed on the initial operational capability (IOC) space station for a four-year duration. It is modular in design, consisting of three phases to test the following technologies: passive thermal technologies (phase 1), fluid transfer (phase 2), and active refrigeration (phase 3). Use of existing hardware was a primary consideration throughout the design effort. A conceptual design of the experiment was completed, including configuration sketches, system schematics, equipment specifications, and space station resources and interface requirements. These requirements were entered into the NASA Space Station Mission Data Base. A program plan was developed defining a twelve-year development and flight plan. Program cost estimates are given.

  6. Descriptive Summaries of the Research Development Test & Evaluation Army Appropriation FY 1983. Supporting Data FY 1983, Budget Estimate Submitted to Congress February 1982. Volume II.

    DTIC Science & Technology

    1982-02-01

    Defense (BHD) Advanced Technology Program is a broadly based rsearch and development effort designed to exploit new and emerging technologies...11-363 DK13 NON -COMMUNICATIONS ELECTRONIC COUNTERMEASURES SYSTEMS .............................. .11-368 DK14 EXPENDABLE JAMMERS...NAVSTAR GLOBAL POSITIONING SYSTEMS (GPS) USER EQUIPMENT .................................. 111-366 DEFENSEWIDE MISSION SUPPORT 6.37.38.A NON -SYSTEMS

  7. Training & Personnel Systems Technology. R&D Program Description FY 84-85.

    DTIC Science & Technology

    1984-04-01

    performance requirements in terms of rapid response times, high rates of information processing, and complex decision making that tax the capabilities...makers to make linguistic and format changes to texts to enhance general literacy rates , (d) begin integrating human and animal data on stress ;ffects...systems are being Integrated Into the force at unprecedented rates , arrival of this sophisticated, high-technology equipment will coincide with increased

  8. The 'Y2K bug': how to ease hospital equipment into the next millennium.

    PubMed

    Moyer, P

    1998-01-01

    The advent of the 21st century is unlikely to wreak as much technologic havoc as the doomsayers have predicted. The Y2K problem is addressed by new programs that use a four-digit year code. Although hospitals must prioritize technology for Y2K compliance, they also need to address the issue actively: 2000 is less than 18 months away!

  9. Flow Induced Vibration Program at Argonne National Laboratory

    NASA Astrophysics Data System (ADS)

    1984-01-01

    The Argonne National Laboratory's Flow Induced Vibration Program, currently residing in the Laboratory's Components Technology Division is discussed. Throughout its existence, the overall objective of the program was to develop and apply new and/or improved methods of analysis and testing for the design evaluation of nuclear reactor plant components and heat exchange equipment from the standpoint of flow induced vibration. Historically, the majority of the program activities were funded by the US Atomic Energy Commission, the Energy Research and Development Administration, and the Department of Energy. Current DOE funding is from the Breeder Mechanical Component Development Division, Office of Breeder Technology Projects; Energy Conversion and Utilization Technology Program, Office of Energy Systems Research; and Division of Engineering, Mathematical and Geosciences, office of Basic Energy Sciences. Testing of Clinch River Breeder Reactor upper plenum components was funded by the Clinch River Breeder Reactor Plant Project Office. Work was also performed under contract with Foster Wheeler, General Electric, Duke Power Company, US Nuclear Regulatory Commission, and Westinghouse.

  10. Using the Internet: Concept to Classroom.

    ERIC Educational Resources Information Center

    Greenhalgh, J. B.

    1997-01-01

    State, federal, and corporate grants enabled Georgian Court College (New Jersey) to connect to the Internet, establish a multimedia lab, and purchase equipment for interactive distance learning. Describes the implementation of new programs utilizing Internet technology and highlights sample Internet projects in social work, education, aquatic and…

  11. 10 CFR 431.443 - Materials incorporated by reference.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by... Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza, SW., Washington, DC 20024...) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscataway...

  12. Alternative Fuels Data Center

    Science.gov Websites

    Construction Clean Construction is a voluntary program that promotes the reduction of diesel exhaust emissions from construction equipment and vehicles by encouraging proper operations and maintenance, use of emissions-reducing technologies, and use of cleaner fuels. Clean Construction is part of

  13. 30 CFR 582.23 - Testing Plan.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

  14. 30 CFR 582.23 - Testing Plan.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

  15. 30 CFR 582.23 - Testing Plan.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

  16. 10 CFR 431.443 - Materials incorporated by reference.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by... Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza, SW., Washington, DC 20024...) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscataway...

  17. 10 CFR 431.15 - Materials incorporated by reference.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... INDUSTRIAL EQUIPMENT Electric Motors Test Procedures, Materials Incorporated and Methods of Determining... of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Sixth.... (1) IEC 60034-1 Edition 12.0 2010-02, (“IEC 60034-1”), Rotating Electrical Machines, Part 1: Rating...

  18. 10 CFR 431.443 - Materials incorporated by reference.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by... Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza, SW., Washington, DC 20024...) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscataway...

  19. Joining technologies for the 1990s: Welding, brazing, soldering, mechanical, explosive, solid-state, adhesive

    NASA Technical Reports Server (NTRS)

    Buckley, John D. (Editor); Stein, Bland A. (Editor)

    1986-01-01

    A compilation of papers presented in a joint NASA, American Society for Metals, The George Washington University, American Welding Society, and Society of Manufacturing Engineers Conference on Welding, Bonding, and Fastening at Langley Research Center, Hampton, VA, on October 23 to 25, 1984 is given. Papers were presented on technology developed in current research programs relevant to welding, bonding, and fastening of structural materials required in fabricating structures and mechanical systems used in the aerospace, hydrospace, and automotive industries. Topics covered in the conference included equipment, hardware and materials used when welding, brazing, and soldering, mechanical fastening, explosive welding, use of unique selected joining techniques, adhesives bonding, and nondestructive evaluation. A concept of the factory of the future was presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding.

  20. Shuttle free-flying teleoperator system experiment definition. Volume 3: program development requirements

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The planning data are presented for subsequent phases of free-flying teleoperator program (FFTO) and includes costs, schedules and supporting research and technology activities required to implement the free-flying teleoperator system and associated flight equipment. The purpose of the data presented is to provide NASA with the information needed to continue development of the FFTO and integrate it into the space shuttle program. The planning data describes three major program phases consisting of activities and events scheduled to effect integrated design, development, fabrication and operation of an FFTO system. Phase A, Concept Generation, represents a study effort directed toward generating and evaluating a number of feasible FFTO experiment system concepts. Phase B, Definition, will include preliminary design and supporting analysis of the FFTO, the shuttle based equipment and ground support equipment. Phase C/D, Design, Development and Operations will include detail design of the operational FFTO, its integration into the space shuttle, hardware fabrication and testing, delivery of flight hardware and support of flight operations. Emphasis is placed on the planning for Phases A and B since these studies will be implemented early in the development cycle. Phase C/D planning is more general and subject to refinement during the definition phase.

  1. Hybrid Modeling Improves Health and Performance Monitoring

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Scientific Monitoring Inc. was awarded a Phase I Small Business Innovation Research (SBIR) project by NASA's Dryden Flight Research Center to create a new, simplified health-monitoring approach for flight vehicles and flight equipment. The project developed a hybrid physical model concept that provided a structured approach to simplifying complex design models for use in health monitoring, allowing the output or performance of the equipment to be compared to what the design models predicted, so that deterioration or impending failure could be detected before there would be an impact on the equipment's operational capability. Based on the original modeling technology, Scientific Monitoring released I-Trend, a commercial health- and performance-monitoring software product named for its intelligent trending, diagnostics, and prognostics capabilities, as part of the company's complete ICEMS (Intelligent Condition-based Equipment Management System) suite of monitoring and advanced alerting software. I-Trend uses the hybrid physical model to better characterize the nature of health or performance alarms that result in "no fault found" false alarms. Additionally, the use of physical principles helps I-Trend identify problems sooner. I-Trend technology is currently in use in several commercial aviation programs, and the U.S. Air Force recently tapped Scientific Monitoring to develop next-generation engine health-management software for monitoring its fleet of jet engines. Scientific Monitoring has continued the original NASA work, this time under a Phase III SBIR contract with a joint NASA-Pratt & Whitney aviation security program on propulsion-controlled aircraft under missile-damaged aircraft conditions.

  2. Southwest Research Institute assistance to NASA in biomedical areas of the technology utilization program

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The problem statements presented relate mostly to research on prosthetic equipment and means of attaching biomedical and electronic devices to the human body. A patent application for a reliable switching element in a patient assist control units is also described.

  3. 30 CFR 585.706 - How do I nominate a CVA for BOEM approval?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... technology (including computer programs, hardware, and testing materials and equipment); (5) Ability to perform the CVA functions for the specific project considering current commitments; (6) Previous... facilities; (2) Technical capabilities of the individual or the primary staff for the specific project; (3...

  4. 30 CFR 585.706 - How do I nominate a CVA for BOEM approval?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... technology (including computer programs, hardware, and testing materials and equipment); (5) Ability to perform the CVA functions for the specific project considering current commitments; (6) Previous... facilities; (2) Technical capabilities of the individual or the primary staff for the specific project; (3...

  5. 30 CFR 585.706 - How do I nominate a CVA for BOEM approval?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... technology (including computer programs, hardware, and testing materials and equipment); (5) Ability to perform the CVA functions for the specific project considering current commitments; (6) Previous... facilities; (2) Technical capabilities of the individual or the primary staff for the specific project; (3...

  6. Advanced lighting guidelines: 1993. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Eley, C.; Tolen, T.M.; Benya, J.R.

    1993-12-31

    The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halidemore » and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.« less

  7. A case study in technology utilization: Industrial products and practices. [summary of benefits to national economy resulting from space programs

    NASA Technical Reports Server (NTRS)

    1973-01-01

    In pursuit of such missions as Apollo, the National Aeronautics and Space Administration has called into being unique equipment that obviously has little direct application beyond the achievement of mission objectives. Yet, to assume that further direct application of space program hardware is somehow a measure of the industrial benefits accruing to the nation is to misunderstand how the creation of new technology affects modern industrial capability. This document presents a profile of the significant ways in which technological developments in response to aerospace mission requirements have been coupled into industrial practice, with the result being that improved products and processes are now being utilized to benefit the nation.

  8. Reported use of technology in stroke rehabilitation by physical and occupational therapists.

    PubMed

    Langan, Jeanne; Subryan, Heamchand; Nwogu, Ifeoma; Cavuoto, Lora

    2017-08-16

    With the patient care experience being a healthcare priority, it is concerning that patients with stroke reported boredom and a desire for greater fostering of autonomy, when evaluating their rehabilitation experience. Technology has the potential to reduce these shortcomings by engaging patients through entertainment and objective feedback. Providing objective feedback has resulted in improved outcomes and may assist the patient in learning how to self-manage rehabilitation. Our goal was to examine the extent to which physical and occupational therapists use technology in clinical stroke rehabilitation home exercise programs. Surveys were sent via mail, email and online postings to over 500 therapists, 107 responded. Conventional equipment such as stopwatches are more frequently used compared to newer technology like Wii and Kinect games. Still, less than 25% of therapists' report using a stopwatch five or more times per week. Notably, feedback to patients is based upon objective data less than 50% of the time by most therapists. At the end of clinical rehabilitation, patients typically receive a written home exercise program and non-technological equipment, like theraband and/or theraputty to continue rehabilitation efforts independently. The use of technology is not pervasive in the continuum of stroke rehabilitation. Implications for Rehabilitation The patient care experience is a priority in healthcare, so when patients report feeling bored and desiring greater fostering of autonomy in stroke rehabilitation, it is troubling. Research examining the use of technology has shown positive results for improving motor performance and engaging patients through entertainment and use of objective feedback. Physical and occupational therapists do not widely use technology in stroke rehabilitation. Therapists should consider using technology in stroke rehabilitation to better meet the needs of the patient.

  9. PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MCDONALD,R.J.

    1999-04-01

    The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their helpmore » and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.« less

  10. Automation and robotics technology for intelligent mining systems

    NASA Technical Reports Server (NTRS)

    Welsh, Jeffrey H.

    1989-01-01

    The U.S. Bureau of Mines is approaching the problems of accidents and efficiency in the mining industry through the application of automation and robotics to mining systems. This technology can increase safety by removing workers from hazardous areas of the mines or from performing hazardous tasks. The short-term goal of the Automation and Robotics program is to develop technology that can be implemented in the form of an autonomous mining machine using current continuous mining machine equipment. In the longer term, the goal is to conduct research that will lead to new intelligent mining systems that capitalize on the capabilities of robotics. The Bureau of Mines Automation and Robotics program has been structured to produce the technology required for the short- and long-term goals. The short-term goal of application of automation and robotics to an existing mining machine, resulting in autonomous operation, is expected to be accomplished within five years. Key technology elements required for an autonomous continuous mining machine are well underway and include machine navigation systems, coal-rock interface detectors, machine condition monitoring, and intelligent computer systems. The Bureau of Mines program is described, including status of key technology elements for an autonomous continuous mining machine, the program schedule, and future work. Although the program is directed toward underground mining, much of the technology being developed may have applications for space systems or mining on the Moon or other planets.

  11. An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

    NASA Technical Reports Server (NTRS)

    Sampson, Paul G.; Sny, Linda C.

    1992-01-01

    The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

  12. Federal Geothermal Research Program Update, FY 2000

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Renner, Joel Lawrence

    2001-08-01

    The Department of Energy's Geothermal Program serves two broad purposes: 1) to assist industry in overcoming near-term barriers by conducting cost-shared research and field verification that allows geothermal energy to compete in today's aggressive energy markets; and 2) to undertake fundamental research with potentially large economic payoffs. The four categories of work used to distinguish the research activities of the Geothermal Program during FY 2000 reflect the main components of real-world geothermal projects. These categories form the main sections of the project descriptions in this Research Update. Exploration Technology research focuses on developing instruments and techniques to discover hidden hydrothermalmore » systems and to explore the deep portions of known systems. Research in geophysical and geochemical methods is expected to yield increased knowledge of hidden geothermal systems. Reservoir Technology research combines laboratory and analytical investigations with equipment development and field testing to establish practical tools for resource development and management for both hydrothermal reservoirs and enhanced geothermal systems. Research in various reservoir analysis techniques is generating a wide range of information that facilitates development of improved reservoir management tools. Drilling Technology focuses on developing improved, economic drilling and completion technology for geothermal wells. Ongoing research to avert lost circulation episodes in geothermal drilling is yielding positive results. Conversion Technology research focuses on reducing costs and improving binary conversion cycle efficiency, to permit greater use of the more abundant moderate-temperature geothermal resource, and on the development of materials that will improve the operating characteristics of many types of geothermal energy equipment. Increased output and improved performance of binary cycles will result from investigations in heat cycle research.« less

  13. Federal Geothermal Research Program Update Fiscal Year 2000

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Renner, J.L.

    2001-08-15

    The Department of Energy's Geothermal Program serves two broad purposes: (1) to assist industry in overcoming near-term barriers by conducting cost-shared research and field verification that allows geothermal energy to compete in today's aggressive energy markets; and (2) to undertake fundamental research with potentially large economic payoffs. The four categories of work used to distinguish the research activities of the Geothermal Program during FY 2000 reflect the main components of real-world geothermal projects. These categories form the main sections of the project descriptions in this Research Update. Exploration Technology research focuses on developing instruments and techniques to discover hidden hydrothermalmore » systems and to explore the deep portions of known systems. Research in geophysical and geochemical methods is expected to yield increased knowledge of hidden geothermal systems. Reservoir Technology research combines laboratory and analytical investigations with equipment development and field testing to establish practical tools for resource development and management for both hydrothermal reservoirs and enhanced geothermal systems. Research in various reservoir analysis techniques is generating a wide range of information that facilitates development of improved reservoir management tools. Drilling Technology focuses on developing improved, economic drilling and completion technology for geothermal wells. Ongoing research to avert lost circulation episodes in geothermal drilling is yielding positive results. Conversion Technology research focuses on reducing costs and improving binary conversion cycle efficiency, to permit greater use of the more abundant moderate-temperature geothermal resource, and on the development of materials that will improve the operating characteristics of many types of geothermal energy equipment. Increased output and improved performance of binary cycles will result from investigations in heat cycle research.« less

  14. GE--Structured Analysis and Design Training.

    ERIC Educational Resources Information Center

    Towne, Violet A.

    At the request of General Electric-Utica (GE), the State University of New York Institute of Technology at Utica/Rome and the Mohawk Valley Regional Education Center for Economic Development have developed a program to train GE software development personnel. GE is involved in the development of aerospace electronic equipment and related software…

  15. 75 FR 1121 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-08

    ...The U.S. Department of Energy (DOE) is adopting amended energy conservation standards for commercial clothes washers (CCWs). DOE has determined that amended energy conservation standards for these types of equipment would result in significant conservation of energy, and are technologically feasible and economically justified.

  16. 10 CFR 73.55 - Requirements for physical protection of licensed activities in nuclear power reactors against...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... integration of systems, technologies, programs, equipment, supporting processes, and implementing procedures...-in-depth methodologies to minimize the potential for an insider to adversely affect, either directly... protection of digital computer and communication systems and networks. (ii) Site-specific conditions that...

  17. Program Budgeting and Educational Communications Centers.

    ERIC Educational Resources Information Center

    Humphrey, David A.

    Educational communications centers, also known as instructional resource centers or various other titles, bring together many pieces of equipment and technology formerly kept in separate areas. When they are brought together, these pieces require so large a budget that the budget is often brought under close scrutiny. As a result, those in charge…

  18. Employing Subgoals in Computer Programming Education

    ERIC Educational Resources Information Center

    Margulieux, Lauren E.; Catrambone, Richard; Guzdial, Mark

    2016-01-01

    The rapid integration of technology into our professional and personal lives has left many education systems ill-equipped to deal with the influx of people seeking computing education. To improve computing education, we are applying techniques that have been developed for other procedural fields. The present study applied such a technique, subgoal…

  19. 30 CFR 250.914 - How do I nominate a CVA?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) Technical capabilities of the individual or the primary staff for the specific project; (3) Size and type of organization or corporation; (4) In-house availability of, or access to, appropriate technology. This should include computer programs, hardware, and testing materials and equipment; (5) Ability to perform the CVA...

  20. 30 CFR 285.706 - How do I nominate a CVA for MMS approval?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... for the specific project; (3) Size and type of organization or corporation; (4) In-house availability of, or access to, appropriate technology (including computer programs, hardware, and testing materials and equipment); (5) Ability to perform the CVA functions for the specific project considering...

  1. Development of Communication Technology in Japan: The Hi-OVIS Project.

    ERIC Educational Resources Information Center

    Murata, Toshihiko

    1981-01-01

    Describes the two-way Highly Interactive Optical Visual Information System (Hi-OVIS), involving the transmission and reception of educational, advertising, and public service programing, which has been in experimental use in Japan since 1978. Utilizing fiber optics, the system equips each house with a keyboard, television, television camera, and…

  2. 40 CFR 80.260 - What are the procedures and requirements for obtaining a hardship extension?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur... the refinery to produce gasoline meeting the requirements of § 80.195. Such an application must... appropriate sulfur reduction technology and other equipment procurements or improvements; and (ii) If...

  3. Alternative Fuels Data Center

    Science.gov Websites

    Clean School Bus Program Any school district or charter school may receive a grant through the Texas Commission on Environmental Quality (TCEQ) to pay for the incremental costs to replace school equipment, and other emissions reduction technologies in qualified school buses. Furthermore, funds may also

  4. 75 FR 22031 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-27

    ..., including induction and fluorescent. Non-HID technologies are achieving market penetration in lighting... the electromagnetic (magnetic) type. The industry-accepted life of magnetic ballasts is 50,000 hours... analysis for today's proposed determination, DOE only considered magnetic ballasts because they are the...

  5. 30 CFR 282.23 - Testing Plan.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Testing Plan. 282.23 Section 282.23 Mineral... § 282.23 Testing Plan. All testing activities shall be conducted in accordance with a Testing Plan..., to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

  6. Active Gaming: Is "Virtual" Reality Right for Your Physical Education Program?

    ERIC Educational Resources Information Center

    Hansen, Lisa; Sanders, Stephen W.

    2012-01-01

    Active gaming is growing in popularity and the idea of increasing children's physical activity by using technology is largely accepted by physical educators. Teachers nationwide have been providing active gaming equipment such as virtual bikes, rhythmic dance machines, virtual sporting games, martial arts simulators, balance boards, and other…

  7. 10 CFR 431.443 - Materials incorporated by reference.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by... Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza, SW., Washington, DC 20024... §§ 431.444; 431.447. (c) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P...

  8. 30 CFR 250.914 - How do I nominate a CVA?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) Technical capabilities of the individual or the primary staff for the specific project; (3) Size and type of organization or corporation; (4) In-house availability of, or access to, appropriate technology. This should include computer programs, hardware, and testing materials and equipment; (5) Ability to perform the CVA...

  9. 30 CFR 250.914 - How do I nominate a CVA?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) Technical capabilities of the individual or the primary staff for the specific project; (3) Size and type of organization or corporation; (4) In-house availability of, or access to, appropriate technology. This should include computer programs, hardware, and testing materials and equipment; (5) Ability to perform the CVA...

  10. 30 CFR 250.914 - How do I nominate a CVA?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) Technical capabilities of the individual or the primary staff for the specific project; (3) Size and type of organization or corporation; (4) In-house availability of, or access to, appropriate technology. This should include computer programs, hardware, and testing materials and equipment; (5) Ability to perform the CVA...

  11. 33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... be associated with the CE's duties for the specific project; (7) In-house availability of, or access to, appropriate technology such as computer modeling programs and hardware or testing materials and...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities...

  12. 33 CFR 148.8 - How are certifying entities designated and used for purposes of this subchapter?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... be associated with the CE's duties for the specific project; (7) In-house availability of, or access to, appropriate technology such as computer modeling programs and hardware or testing materials and...-based structures and project-related structures, systems, and equipment; (6) Technical capabilities...

  13. Waveform stimulus subsystem: An advanced technology multifunction subsystem on a card

    NASA Astrophysics Data System (ADS)

    Pritchard, David J.

    The F-15 TISS ATE (automatic test equipment) requires subsystem-on-a-card technology to achieve the required functionality within the space constraints. The waveform stimulus subsystem (WSS), an example of this advanced technology, is considered. The WSS circuit card consists of two 40-MHz pulse generators and an 80-MHz aribtrary waveform generator. Each generator is independently programmed and is available simultaneously to the user. The implementation of this highly integrated malfunction-detection system on a card is described, and the benefits to performance and maintainability are highlighted.

  14. Environmental monitoring for the DOE coolside and LIMB demonstration extension projects

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    White, T.; Contos, L.; Adams, L.

    1992-03-01

    The purpose of this document is to present environmental monitoring data collected during the US Department of Energy Limestone Injection Multistage Burner (DOE LIMB) Demonstration Project Extension at the Ohio Edison Edgewater Generating Station in Lorain, Ohio. The DOE project is an extension of the US Environmental Protection Agency's (EPA's) original LIMB Demonstration. The program is operated nuclear DOE's Clean Coal Technology Program of emerging clean coal technologies'' under the categories of in boiler control of oxides of sulfur and nitrogen'' as well as post-combustion clean-up.'' The objective of the LIMB program is to demonstrate the sulfur dioxide (SO{sub 2})more » and nitrogen oxide (NO{sub x}) emission reduction capabilities of the LIMB system. The LIMB system is a retrofit technology to be used for existing coal-fired boilers equipped with electrostatic precipitators (ESPs).« less

  15. Environmental monitoring for the DOE coolside and LIMB demonstration extension projects. Final report, May--August 1991

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    White, T.; Contos, L.; Adams, L.

    1992-03-01

    The purpose of this document is to present environmental monitoring data collected during the US Department of Energy Limestone Injection Multistage Burner (DOE LIMB) Demonstration Project Extension at the Ohio Edison Edgewater Generating Station in Lorain, Ohio. The DOE project is an extension of the US Environmental Protection Agency`s (EPA`s) original LIMB Demonstration. The program is operated nuclear DOE`s Clean Coal Technology Program of ``emerging clean coal technologies`` under the categories of ``in boiler control of oxides of sulfur and nitrogen`` as well as ``post-combustion clean-up.`` The objective of the LIMB program is to demonstrate the sulfur dioxide (SO{sub 2})more » and nitrogen oxide (NO{sub x}) emission reduction capabilities of the LIMB system. The LIMB system is a retrofit technology to be used for existing coal-fired boilers equipped with electrostatic precipitators (ESPs).« less

  16. Engineering and Development Support of General Decon Technology for the DARCOM Installation Restoration Program. Task 2. Treatment of Explosives Contaminated Lagoon Sediment. Phase I. Literature Review and Evaluation

    DTIC Science & Technology

    1980-11-01

    hr incineration rate are presented in Table 15. These costs include dredging equipment, flat bed trailer and afterburners and venturi scrubbers where...require further treatment before they can be released into the environment, i.e. biological degradation for the liquid and specific scrubbers for the...The wet-air units are equipped with wet scrubbers to remove air emissions. Air emissions are expected to contain at a minimum CO, C0 2 ,N2 , 0, and

  17. LBR-2 Earth stations for the ACTS program

    NASA Technical Reports Server (NTRS)

    Oreilly, Michael; Jirberg, Russell; Spisz, Ernie

    1990-01-01

    The Low Burst Rate-2 (LBR-2) earth station being developed for NASA's Advanced Communications Technology Satellite (ACTS) is described. The LBR-2 is one of two earth station types that operate through the satellite's baseband processor. The LBR-2 is a small earth terminal (VSAT)-like earth station that is easily sited on a user's premises, and provides up to 1.792 megabits per second (MBPS) of voice, video, and data communications. Addressed here is the design of the antenna, the rf subsystems, the digital processing equipment, and the user interface equipment.

  18. Information technology equipment cooling method

    DOEpatents

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  19. Emissions performance of abatement technologies over the proposed EEC extra-urban driving cycle

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    VanBeckhoven, L.C.; Rijkeboer, R.C.

    1989-01-01

    The definition of what is likely to be the new EEC extra-urban cycle has made it possible to determine the emission characteristics of cars fitted with different emissions control equipment. Central to the evaluation program were three versions of experimental lean and dilute burn engines compared with engine modifications and open and closed loop three-way catalyst systems. This paper describes the evaluation program and evaluates its results.

  20. Didactical determinants use of information and communication technology in process of training of future specialists.

    PubMed

    Palamar, Borys I; Vaskivska, Halyna O; Palamar, Svitlana P

    In the article the author touches upon the subject of significance of computer equipment for organization of cooperation of professor and future specialists. Such subject-subject interaction may be directed to forming of professional skills of future specialists. By using information and communication technologies in education system range of didactic tasks can be solved. Improving of process of teaching of subjects in high school, self-learning future specialists, motivating to learning and self-learning, the development of reflection in the learning process. The authors considers computer equipment as instrument for development of intellectual skills, potential and willingness of future specialists to solve communicative and communication tasks and problems on the creative basis. Based on results of researches the author comes to certain conclusions about the effectiveness of usage of computer technologies in process of teaching future specialists and their self-learning. Improper supplying of high schools with computer equipment, lack of appropriate educational programs, professors' teachers' poor knowledge and usage of computers have negative impact on organization of process of teaching disciplines in high schools. Computer equipment and ICT in general are the instruments of development of intellectual skills, potential and willingness of future specialists to solve communicative and communication tasks and problems. So, the formation of psychosocial environment of development of future specialist is multifaceted, complex and didactically important issue.

  1. Airborne Systems Technology Application to the Windshear Threat

    NASA Technical Reports Server (NTRS)

    Arbuckle, P. Douglas; Lewis, Michael S.; Hinton, David A.

    1996-01-01

    The general approach and products of the NASA/FAA Airborne Windshear Program conducted by NASA Langley Research Center are summarized, with references provided for the major technical contributions. During this period, NASA conducted 2 years of flight testing to characterize forward-looking sensor performance. The NASA/FAA Airborne Windshear Program was divided into three main elements: Hazard Characterization, Sensor Technology, and Flight Management Systems. Simulation models developed under the Hazard Characterization element are correlated with flight test data. Flight test results comparing the performance and characteristics of the various Sensor Technologies (microwave radar, lidar, and infrared) are presented. Most of the activities in the Flight Management Systems element were conducted in simulation. Simulation results from a study evaluating windshear crew procedures and displays for forward-looking sensor-equipped airplanes are discussed. NASA Langley researchers participated heavily in the FAA process of generating certification guidelines for predictive windshear detection systems. NASA participants felt that more valuable technology products were generated by the program because of this interaction. NASA involvement in the process and the resulting impact on products and technology transfer are discussed in this paper.

  2. Teaching marine science to the next generation: Innovative programs for 6th”8th Graders gain momentum

    NASA Astrophysics Data System (ADS)

    Tebbens, S. F.; Coble, P. G.; Greely, T.

    Three educational outreach programs designed for middle school students (grades 6, 7, and 8) by faculty at the University of South Florida (USF) Department of Marine Science are turning kids onto science. The programs are bringing marine science research and its various technologies into the classroom, where students follow up with hands-on activities. Project Oceanography (PO) is an interactive broadcast that exposes students to the concepts and tools of current marine science research. The Oceanography Camp for Girls (OCG) boosts girls' curiosity and interest in science and nature. And teachers become better equipped to present current marine science topics and technology to their students at the Teachers Oceanography Workshop (TOW). All of the programs created by USF are provided at no cost to students or their institutions.

  3. Ghana refinery expansion and modernization project. Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1990-11-01

    The U.S. Trade and Development Program (TDP) is considering the provision of funds to the Ghanaian Ministry of Fuel and Power (MFP) to conduct a study of the scope and feasibility of expanding and modernizing its Tema Refinery to meet future demands for gasoline and to minimize heavy fuel oil production. All of the needed licensed process technology and process know-how could be provided by U.S. sources and this, coupled with U.S. equipment and catalyst supply, meets the TDP criteria for funding the feasibility study. Europe aggressively offers alternate licensable technology for some of the processes. U.S. manufacturers of specialtymore » equipment are marginally competitive in the international market, where competition is fierce. The Definitional Mission recommends that full feasibility study be undertaken.« less

  4. NREL's Hydrogen Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deutsch, Todd; Sverdrup, George; Ghirardi, Maria

    The research and development taking place today at the National Renewable Energy Laboratory (NREL) is paving the way for nature's most plentiful element—hydrogen—to power the next generation. NREL researchers are working to unlock the potential of hydrogen and to advance the fuel cell technologies that will power the automobiles, equipment, and buildings of tomorrow. Hydrogen and fuel cells are a fundamental part of the broader portfolio of renewable technologies that are moving our nation toward its goals of energy independence and sustainability.

  5. A Program Office Guide to Technology Transfer

    DTIC Science & Technology

    1988-11-01

    Requirements 2-4 2.4.1 Equipment Complexity 2-5 2.4.2 Industrial Capabilities 2-5 2.4.3 Logistics Requirements/Configuration Control 2-5 2.4.4 Schedule...accomplishment of these milestones re- with the leverage of the FSD and production pro- sults in second source full production capability , grams. For more...MANUFACTURING PROCESSES BUILD UP COMPETITIVE PRODUCTION RATE CAPABILITY DURING LOT III Table 1.2-1 AMRAAM Technology Transfer The leader-follower approach is

  6. Technology management: a perspective on system support, procurement, and replacement planning.

    PubMed

    Dickerson, M L; Jackson, M E

    1992-01-01

    The escalating costs associated with medical technology present a host of challenges for the hospital clinical engineering department. As service and support costs comprise ever larger portions of a system's life cycle cost, innovative management of service provider mix and mechanisms can provide substantial savings in operating expenses. In addition to full-service contracts, the use of demand service and independents has become commonplace. Medical equipment maintenance insurance programs provide yet another service alternative, combining the flexibility of demand service with the safety of a capped budget. These programs have gained acceptance among hospitals as their providers have become more focused on the healthcare market and its many needs. In view of the long-term cost impact surrounding technology procurement, the authors recommend that hospitals refine system evaluation methodologies and develop more comprehensive techniques directed at capital equipment replacement planning. One replacement planning approach, based on an estimation of system value changes, is described and illustrated using data collected through client consultations. Although the validity of this method has not been demonstrated, it represents a simplified approach to life cycle cost analysis and is intended to provide a standard method by which system replacement planning may be quantified. As a departure from system devaluation based solely on depreciation, this method estimates prospective system values derived from anticipated operations and maintenance costs, projected revenue, and the availability of new technology.

  7. Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

    PubMed

    Sezdi, Mana

    2016-01-01

    A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

  8. Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

    PubMed Central

    Sezdi, Mana

    2016-01-01

    A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices. PMID:27195666

  9. 49 CFR 1549.103 - Qualifications and training of individuals with security-related duties.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... screening technologies that the facility is authorized to use. These include: (i) The ability to operate x-ray equipment and to distinguish on the x-ray monitor the appropriate imaging standard specified in the certified cargo screening facility security program. Wherever the x-ray system displays colors...

  10. Natural Gas Compression Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5311.1

    ERIC Educational Resources Information Center

    Alberta Advanced Education and Technology, 2011

    2011-01-01

    The graduate of the Natural Gas Compression Technician apprenticeship program is a certified journeyperson who will be able to install, commission, maintain and repair equipment used to gather store and transmit natural gas. Advanced Education and Technology has prepared this course outline in partnership with the Natural Gas Compression…

  11. Transportation infrastructure asset damage cost recovery correlated with shale oil/gas recovery operations in Louisiana : research project capsule : technology transfer program.

    DOT National Transportation Integrated Search

    2016-10-01

    Due to shale oil/gas recovery : operations, a large number : of truck trips on Louisiana : roadways are required for : transporting equipment and : materials to and from the : recovery sites. As a result, : roads and bridges that were : designed for ...

  12. 47 CFR 64.610 - Establishment of a National Deaf-Blind Equipment Distribution Program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... restrictions on specific brands, models or types of communications technology that recipients may receive to...-blindness, including familiarity with the culture and etiquette of people who are deaf-blind, to ensure that... to consumers who are deaf-blind; (ii) The ability to communicate effectively with people who are deaf...

  13. Education and Training in Japan in the Cybernetic Age. Program Report No. 85-B2.

    ERIC Educational Resources Information Center

    Muta, Hiromitsu

    The introduction of computers and other microelectronic equipment throughout the Japanese economy has not affected employment negatively, owing to economic growth and the adaptability of the workers and business organizations affected. Because rapid advances in technology are making many specialized skills and areas of knowledge obsolete, it is…

  14. Single passenger rail car impact test. Volume 2 : summary of occupant protection program : rail passenger equipment collision tests

    DOT National Transportation Integrated Search

    2000-03-01

    A test in which a single rail passenger car was crashed into a fixed wall at 35 mph was conducted at the Transportation Technology Center on November 16, 1999. The car was instrumented to measure (1) the deformations of critical structural elements, ...

  15. Consolidated fuel reprocessing program

    NASA Astrophysics Data System (ADS)

    1985-02-01

    Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

  16. [Hygienic evaluation of the efficacy of the regional program of the modernization of school meals (on the example of Altai Krai)].

    PubMed

    Saldan, I P; Filippova, S P; Turchaninov, D V; Okolelova, O V; Vilms, E A

    2014-01-01

    With the use of the method for the analysis of the frequency of food intake there was studied the actual nutrition in adolescents at the age of 12-17 years (n = 257) who were the students of the urban and rural educational institutions (EI) of Altai Krai. The analysis of the menu-layout and assessment of nutritional status was performed with the use of clinical methods. The main group consisted of 125 adolescents from the EI with upgraded technological equipment of the nutrition unit, the comparison group--132 teenagers from EI with non-upgraded equipment of the nutrition department. The program of the modernization of school meals was implemented in several ways and included the reconstruction and technical re-equipment of school nutrition units on the base of modern technologies, delivery and introduction in accordance with the requirements of the school menu, differentiated by age groups with the use of food products aimed at the prevention of diseases caused by micronutrient deficiency. This led to the enlargement of the assortment of dishes, the increase of the coverage for catering students, improvement of the structure of student nutrition, the increased in the intake of a number of nutrients. Symptoms of skin lesions associated with insufficient provision of micronutrients in a core group of students occurred less common than in the comparison group (p < 0.01).

  17. "Cloud" functions and templates of engineering calculations for nuclear power plants

    NASA Astrophysics Data System (ADS)

    Ochkov, V. F.; Orlov, K. A.; Ko, Chzho Ko

    2014-10-01

    The article deals with an important problem of setting up computer-aided design calculations of various circuit configurations and power equipment carried out using the templates and standard computer programs available in the Internet. Information about the developed Internet-based technology for carrying out such calculations using the templates accessible in the Mathcad Prime software package is given. The technology is considered taking as an example the solution of two problems relating to the field of nuclear power engineering.

  18. Dual-use technology programs

    NASA Astrophysics Data System (ADS)

    Johns, Lionel S.

    1994-10-01

    The paper presents the Clinton Administration's commitment to American industrial competitiveness through a strategic focus on research and development and to dual-use technologies in particular. Working in partnership with industry, the dual-use approach is essential for giving our armed forces the world's best, most technically advanced military equipment at affordable cost. The President has set a goal of shifting from a dominant role for military technologies in our Federal R&D investments to a roughly equal balance between military on the one hand and civilian and dual-use on the other. We have already made significant progress toward this goal.

  19. [Evolution of the audio-visual technologies of production and diffusion and the conditions of their application in the Third World].

    PubMed

    Lefebvre, M

    1979-01-01

    The present information production techniques are so inefficient that it is out of the question to generalize them. On the other hand audio-visual communication raises a major political problem, especially for developing countries. Audio-visual equipment has gone through adjustment phases; the example of the tape and cassette recorder is given: 2 technological improvements have completely modified its use; the transistors have allowed considerable reduction in volume and weight as well as the energy necessary; the invention of the cassette has simplified its use. Technological research is following 3 major directions: the production of equipment which consumes little energy; the improvement of electronic component production techniques (towards cheaper electronic components); finally, the designing of systems allowing to stock large quantities of information. The communication systems will probably make so much progress in the areas of technology and programming, that they will soon have very different uses than the present ones. The question is whether our civilizations will let themselves be dominated by these new systems, or whether they will succeed to turn them into progress tools.

  20. VRLane: a desktop virtual safety management program for underground coal mine

    NASA Astrophysics Data System (ADS)

    Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

    2008-10-01

    VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

  1. Student performance in computing education: an empirical analysis of online learning in programming education environments

    NASA Astrophysics Data System (ADS)

    Xia, Belle Selene; Liitiäinen, Elia

    2017-11-01

    The benefits of using online exercises have been analysed in terms of distance learning, automatic assessment and self-regulated learning. In this study, we have not found a direct proportional relationship between student performance in the course exercises that use online technologies and the exam grades. We see that the average submission rate to these online exercises is not positively correlated with the exercise points. Yet, our results confirm that doing exercises along supports student learning and skill accumulation equipping them with the knowledge of programming. While the student performance in programming courses is affected by factors such as prior background in programming, cognitive skills and the quality of teaching, completing the course exercises via learning-by-doing is an indispensable part of teaching. Based on the student feedback from the course survey, the students are highly satisfied with using online technologies as part of learning.

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clancey, P.; Logg, C.

    DEPOT has been developed to provide tracking for the Stanford Linear Collider (SLC) control system equipment. For each piece of equipment entered into the database, complete location, service, maintenance, modification, certification, and radiation exposure histories can be maintained. To facilitate data entry accuracy, efficiency, and consistency, barcoding technology has been used extensively. DEPOT has been an important tool in improving the reliability of the microsystems controlling SLC. This document describes the components of the DEPOT database, the elements in the database records, and the use of the supporting programs for entering data, searching the database, and producing reports from themore » information.« less

  3. Radio-frequency tracking of respiratory equipment: rationale and early experience at the Cleveland Clinic.

    PubMed

    Stoller, James K; Roberts, Vincent; Matt, David; Chom, Leslie; Sasidhar, Madhu; Chatburn, Robert L

    2013-12-01

    When respiratory therapists (RTs) seek respiratory care equipment, finding it quickly is desirable, both to expedite patient care and to avert RTs wasting time. To optimize RTs' ability to quickly locate ventilators, we developed and implemented a radio-frequency identification (RFID) tagging system called eTrak. The Clinical Engineering and Information Technology groups at Cleveland Clinic collaboratively developed a Wi-Fi-based RFID program that used active RFID tags. Altogether, 218 ventilators, 82 noninvasive ventilators, and various non-respiratory equipment were tagged, beginning in March 2010. We calculated the difference in time required to locate equipment before versus after implementation. The eTrak system had a mean 145 log-ons per week over the first year of use, and was associated with a decreased time required for RTs to locate ventilators: median 18 min (range 1-45 min) versus 3 min (range 1-6 min) (P < .001). Surveys of RTs regarding whether equipment was hard to find before versus after implementing eTrak showed a non-significant trend toward improvement. An RFID tracking system for respiratory equipment shortened the time to locate ventilators and non-significantly improved RT satisfaction with finding equipment. RFID tagging of equipment warrants further investigation.

  4. Malfunction of medical equipment as a result of mains borne interference.

    PubMed

    Railton, R; Currie, G D; Corner, G A; Evans, A L

    1993-08-01

    Medical equipment has become more intelligent as the manufacturers have incorporated the latest microprocessor based technology. Equipment malfunction can be caused at any time by inherent errors in the control program but it is particularly important that this is designed to cope with the effects of electrical interference which, in addition, may cause corruption of the software. We have considered interference found in the mains supply in the hospital environment. Using a test protocol with appropriate interference simulators, a wide range of medical equipment was removed temporarily from use and its immunity to electrical mains borne interference tested. Battery operated mains rechargeable devices were unaffected by mains voltage variations including drop-outs and sags whereas mains powered devices were affected to varying degrees of severity. In particular, repetitive drop-outs caused loss of power due to fuse blowing in some life support equipment. Impulses affected 25% and pulse bursts 50% of the equipment tested with some evidence that the more recent designs coped better. The EEC Directive on electro-medical compatibility compliance may cause the design of equipment to be improved but hospitals will have to cope with the above problems in their existing equipment for many years to come.

  5. Small Portable PEM Fuel Cell Systems for NASA Exploration Missions

    NASA Technical Reports Server (NTRS)

    Burke, Kenneth A.

    2005-01-01

    Oxygen-Hydrogen PEM-based fuel cell systems are being examined as a portable power source alternative in addition to advanced battery technology. Fuel cell power systems have been used by the Gemini, Apollo, and Space Shuttle programs. These systems have not been portable, but have been integral parts of their spacecraft, and have used reactants from a separate cryogenic supply. These systems typically have been higher in power. They also have had significant ancillary equipment sections that perform the pumping of reactants and coolant through the fuel cell stack and the separation of the product water from the unused reactant streams. The design of small portable fuel cell systems will be a significant departure from these previous designs. These smaller designs will have very limited ancillary equipment, relying on passive techniques for reactant and thermal management, and the reactant storage will be an integral part of the fuel cell system. An analysis of the mass and volume for small portable fuel cell systems was done to evaluate and quantify areas of technological improvement. A review of current fuel cell technology as well as reactant storage and management technology was completed to validate the analysis and to identify technology challenges

  6. Information technology equipment cooling system

    DOEpatents

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  7. Shuttle filter study. Volume 1: Characterization and optimization of filtration devices

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A program to develop a new technology base for filtration equipment and comprehensive fluid particulate contamination management techniques was conducted. The study has application to the systems used in the space shuttle and space station projects. The scope of the program is as follows: (1) characterization and optimization of filtration devices, (2) characterization of contaminant generation and contaminant sensitivity at the component level, and (3) development of a comprehensive particulate contamination management plane for space shuttle fluid systems.

  8. The Frustrations of Digital Fabrication: An Auto/Ethnographic Exploration of "3D Making" in School

    ERIC Educational Resources Information Center

    Nemorin, Selena

    2017-01-01

    Following initial educational enthusiasms for 'Making' technologies and the 'Maker Movement', increasing numbers of students are now using digital fabrication programs and equipment in school. Given the current lack of empirical research exploring the realities of Making as a school activity, this paper presents an in-depth auto/ethnographic…

  9. Fidget with Widgets: CNC Activity Introduces the Flatbed Router

    ERIC Educational Resources Information Center

    Tryon, Daniel V.

    2006-01-01

    The computer numerical control (CNC) flatbed router is a powerful tool and a must-have piece of equipment for any technology education program in which students will produce a product--whether it involves Manufacturing, Materials Processing, or any of the vast array of Project Lead the Way courses. This article describes an activity--producing a…

  10. A Well-Maintained Lab Is a Safer Lab. Safety Spotlight

    ERIC Educational Resources Information Center

    Walls, William H.; Strimel, Greg J.

    2018-01-01

    Administration and funding can cause Engineering/Technology Education (ETE) programs to thrive or die. To administrators, the production/prototyping equipment and laboratory setting are often viewed as the features that set ETE apart from other school subjects. A lab is a unique gift as well as a responsibility. If an administrator can see that…

  11. Bringing Mohamed to the Mountain: Situated Professional Development in a Ubiquitous Computing Classroom

    ERIC Educational Resources Information Center

    Swan, Karen; Kratcoski, Annette; Mazzer, Pat; Schenker, Jason

    2005-01-01

    This article describes an ongoing situated professional development program in which teachers bring their intact classes for an extended stay in a ubiquitous computing environment equipped with a variety of state-of-the-art computing devices. The experience is unique in that it not only situates teacher learning about technology integration in…

  12. 75 FR 37975 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-01

    ... technologies including induction and fluorescent lamps. 75 FR 22031, 22033 (April 27, 2010). In comments... of magnetic ballasts of 50,000 hours. After the 2003 draft report, Allegheny noted that MV ballast... considered only magnetic ballasts because they are the most common ballast used in HID lighting systems. DOE...

  13. The One Laptop School: Equipping Rural Elementary Schools in South India through Public Private Partnerships

    ERIC Educational Resources Information Center

    Byker, Erik Jon

    2015-01-01

    This article reports on a Public Private Partnership (PPP) program in South India that provided information and communication technology (ICT) to rural elementary schools. The article examined the current status of rural, government-run elementary schools in India by reviewing reports like the Annual Status of Education Report (ASER) in India.…

  14. Performance and economic evaluation of the seahorse natural gas hot water heater conversion at Fort Stewart. Interim report, 1994 Summer

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Winiarski, D.W.

    1995-01-01

    The federal government is the largest single energy consumer in the United States cost valued at nearly $10 billion annually. The US Department of Energy`s (DOE) Federal Energy Management Program (FEMP) supports efforts to reduce energy use and associated expenses in the federal sector. One such effort, the New Technology Demonstration Program (NTDP), seeks to evaluate new energy-saving US technologies and secure their more timely adoption by the US government. Pacific Northwest Laboratory (PNL) is one of four DOE laboratories that participate in the New Technologies Demonstration Program, providing technical expertise and equipment to evaluate new, energy-saving technologies being studiedmore » under that program. This interim report provides the results of a field evaluation that PNL conducted for DOE/FEMP and the US Department of Defense (DoD) Strategic Environmental Research and Development Program (SERDP) to examine the performance of a candidate energy-saving technology-a hot water heater conversion system to convert electrically heated hot water tanks to natural gas fuel. The unit was installed at a single residence at Fort Stewart, a US Army base in Georgia, and the performance was monitored under the NTDP. Participating in this effort under a Cooperative Research and Development Agreement (CRADA) were Gas Fired Products, developers of the technology; the Public Service Company of North Carolina; Atlanta Gas Light Company; the Army Corps of Engineers; Fort Stewart; and Pacific Northwest Laboratory.« less

  15. Particle emissions from diesel passenger cars equipped with a particle trap in comparison to other technologies.

    PubMed

    Mohr, Martin; Forss, Anna-Maria; Lehmann, Urs

    2006-04-01

    Tail pipe particle emissions of passenger cars, with different engine and aftertreatment technologies, were determined with special focus on diesel engines equipped with a particle filter. The particle number measurements were performed, during transient tests, using a condensation particle counter. The measurement procedure complied with the draft Swiss ordinance, which is based on the findings of the UN/ECE particulate measurement program. In addition, particle mass emissions were measured by the legislated and a modified filter method. The results demonstrate the high efficiency of diesel particle filters (DPFs) in curtailing nonvolatile particle emissions over the entire size range. Higher emissions were observed during short periods of DPF regeneration and immediately afterward, when a soot cake has not yet formed on the filter surface. The gasoline vehicles exhibited higher emissions than the DPF equipped diesel vehicles but with a large variation depending on the technology and driving conditions. Although particle measurements were carried out during DPF regeneration, it was impossible to quantify their contribution to the overall emissions, due to the wide variation in intensity and frequency of regeneration. The numbers counting method demonstrated its clear superiority in sensitivity to the mass measurement. The results strongly suggest the application of the particle number counting to quantify future low tailpipe emissions.

  16. Visual Navigation - SARE Mission

    NASA Technical Reports Server (NTRS)

    Alonso, Roberto; Kuba, Jose; Caruso, Daniel

    2007-01-01

    The SARE Earth Observing and Technological Mission is part of the Argentinean Space Agency (CONAE - Comision Nacional de Actividades Espaciales) Small and Technological Payloads Program. The Argentinean National Space Program requires from the SARE program mission to test in a real environment of several units, assemblies and components to reduce the risk of using these equipments in more expensive Space Missions. The objective is to make use those components with an acceptable maturity in design or development, but without any heritage at space. From the application point of view, this mission offers new products in the Earth Observation data market which are listed in the present paper. One of the technological payload on board of the SARE satellite is the sensor Ground Tracker. It computes the satellite attitude and orbit in real time (goal) and/or by ground processing. For the first operating mode a dedicated computer and mass memory are necessary to be part of the mentioned sensor. For the second operational mode the hardware and software are much simpler.

  17. Integrating care coordination home telehealth and home based primary care in rural Oklahoma: a pilot study.

    PubMed

    Sorocco, Kristen H; Bratkovich, Kristi L; Wingo, Rita; Qureshi, Saleem M; Mason, Patrick J

    2013-08-01

    The purpose of this program was to evaluate the benefits of integrating VA Care Coordination Home Telehealth and Telemental health within HBPC. A case study design was used to determine quality assurance and quality improvement of incorporating additional home telehealth equipment within Home Based Primary Care (HBPC). Veterans with complex medical conditions and their caregivers living in rural Oklahoma were enrolled. Veterans received the same care other HBPC patients received with the addition of home telehealth equipment. Members from the interdisciplinary treatment team were certified to use the telehealth equipment. Veterans and their caregivers were trained on use of the equipment in their homes. Standard HBPC program measures were used to assess the program success. Assessments from all disciplines on the HBPC team were at baseline, 3, and 6 months, and participants provided satisfaction and interview data to assess the benefits of integrating technology into standard care delivery within an HBPC program. Six veterans were enrolled (mean age = 72 yrs) with a range of physical health conditions including: chronic obstructive pulmonary disease, cerebrovascular accident, spinal cord injury, diabetes, hypertension, and syncope. Primary mental health conditions included depression, dementia, anxiety, and PTSD. Scores on the Mini-Mental State Examination ranged from 18 to 30. Over a 6-month period, case studies indicated improvements in strength, social functioning, decreased caregiver burden, and compliance with treatment plan. This integration of CCHT and HBPC served previously underserved rural veterans having complex medical conditions and appears both feasible and clinically beneficial to veterans and their caregivers. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  18. Technologies for safe births.

    PubMed

    1984-01-01

    The basic elements of a safe birth are proper prenatal care, adequate preparation of the mother, health worker, and site, awareness of the progress of labor and safe delivery, recognition of danger signs, and appropriate follow-up care. Technologies are differentiated by determining 1) the needs of rural birth attendants, 2) the nature of delivery kits, 3) proper cleanliness of the hands and equipment, and appropriate use of 5) disinfecting equipment, 6) drugs and medications, 7) the vertical position, 8) specialized instruments, and 9) records and support materials. Alternatives for measuring time are indicated. Customized kits available from UNICEF are described; some of the problems with these kits are reported. The logistics, referral procedures, and training and supervision needed for appropriate program managements are discussed. Adapting technologies to the local environment requires assessing the practices of traditional birth attendants (TBAs), the provision of kits (cost, ease of use and maintenance, replacement, durability, availability), the training required for proper use of equipment, the logistics of kit use, side effects of technologies, community attitudes, and evaluation. The advantages and disadvantages of including or not including particular supplies in the kit are discussed, i.e., the container for boiling water would either be a local pot or the aluminum carrying case. In lieu of a fingernail brush, a twig may be used for nail cleaning. Hand washing where water shortages exist might entail using a tin with a hole plugged with a stick to let water trickle as needed. Antiseptic solutions such a Dettol or Savlon can be used where a severe shortage exists. Basic equipment includes: soap and water, a container for boiling, other sterile containers, a protective cover of delivery area, towels, swabs, an optional apron, cord ties, a cutting instrument, gauze, a receiving blanket, records, and a carrying case.

  19. Autonomous rendezvous and capture development infrastructure

    NASA Technical Reports Server (NTRS)

    Bryan, Thomas C.; Roe, Fred; Coker, Cindy; Nelson, Pam; Johnson, B.

    1991-01-01

    In the development of the technology for autonomous rendezvous and docking, key infrastructure capabilities must be used for effective and economical development. This involves facility capabilities, both equipment and personnel, to devise, develop, qualify, and integrate ARD elements and subsystems into flight programs. One effective way of reducing technical risks in developing ARD technology is the use of the ultimate test facility, using a Shuttle-based reusable free-flying testbed to perform a Technology Demonstration Test Flight which can be structured to include a variety of additional sensors, control schemes, and operational approaches. This conceptual testbed and flight demonstration will be used to illustrate how technologies and facilities at MSFC can be used to develop and prove an ARD system.

  20. Final Technical Report Laramie County Community College: Utility-Scale Wind Energy Technology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Douglas P. Cook

    The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technologymore » curriculum.« less

  1. How to optimize radiological images captured from digital cameras, using the Adobe Photoshop 6.0 program.

    PubMed

    Chalazonitis, A N; Koumarianos, D; Tzovara, J; Chronopoulos, P

    2003-06-01

    Over the past decade, the technology that permits images to be digitized and the reduction in the cost of digital equipment allows quick digital transfer of any conventional radiological film. Images then can be transferred to a personal computer, and several software programs are available that can manipulate their digital appearance. In this article, the fundamentals of digital imaging are discussed, as well as the wide variety of optional adjustments that the Adobe Photoshop 6.0 (Adobe Systems, San Jose, CA) program can offer to present radiological images with satisfactory digital imaging quality.

  2. 26 CFR 1.168(j)-1T - Questions and answers concerning tax-exempt entity leasing rules (temporary).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... technological equipment” means (1) any computer or peripheral equipment, (2) any high technology telephone..., electromechanical, or computer-based high technology equipment which is tangible personal property used in the... before the expiration of its physical useful life. High technology medical equipment may include computer...

  3. Assessment of Intelligent Processing Equipment in the National Aeronautics and Space Administration, 1991

    NASA Technical Reports Server (NTRS)

    Jones, C. S.

    1992-01-01

    Summarized here is an assessment of intelligent processing equipment (IPE) within NASA. An attempt is made to determine the state of IPE development and research in specific areas where NASA might contribute to the national capability. Mechanisms to transfer NASA technology to the U.S. private sector in this critical area are discussed. It was concluded that intelligent processing equipment is finding extensive use in the manufacture of space hardware, especially in the propulsion components of the shuttle. The major benefits are found in improved process consistency, which lowers cost as it reduces rework. Advanced feedback controls are under development and being implemented gradually into shuttle manufacturing. Implementation is much more extensive in new programs, such as in the advanced solid rocket motor and the Space Station Freedom.

  4. CNC water-jet machining and cutting center

    NASA Astrophysics Data System (ADS)

    Bartlett, D. C.

    1991-09-01

    Computer Numerical Control (CNC) water-jet machining was investigated to determine the potential applications and cost-effectiveness that would result by establishing this capability in the engineering shops of Allied-Signal Inc., Kansas City Division (KCD). Both conductive and nonconductive samples were machined at KCD on conventional machining equipment (a three-axis conversational programmed mill and a wire electrical discharge machine) and on two current-technology water-jet machines at outside vendors. These samples were then inspected, photographed, and evaluated. The current-technology water-jet machines were not as accurate as the conventional equipment. The resolution of the water-jet equipment was only +/- 0.005 inch, as compared to +/- 0.0002 inch for the conventional equipment. The principal use for CNC water-jet machining would be as follows: Contouring to near finished shape those items made from 300 and 400 series stainless steels, titanium, Inconel, aluminum, glass, or any material whose fabrication tolerance is less than the machine resolution of +/- 0.005 inch; and contouring to finished shape those items made from Kevlar, rubber, fiberglass, foam, aluminum, or any material whose fabrication specifications allow the use of a machine with +/- 0.005 inch tolerance. Additional applications are possible because there is minimal force generated on the material being cut and because the water-jet cuts without generating dust.

  5. Hazardous materials in aquatic environments of the Mississippi River Basin. Quarterly project status report, July 1, 1993--September 30, 1993

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1993-11-01

    This document is a brief progress report from each of the research and education projects that are currently funded through the ERWM contract. During third quarter 1993, approval was given by DOE for purchase of equipment. Equipment purchases were initiated and much of the equipment has been received and installed. The committees in charge of coordination of sampling and analyses associated with the collaborative research groups continued to meet and address these issues. Sampling has been done in the lower part of Devil`s Swamp and in the Devil`s Swamp Lake area. In addition, extensive sampling has been done in Bayoumore » Trepagnier and in Bayou St. John. During this period, Tulane and Xavier Universities continued working closely with Oak Ridge National Laboratories (ORNL). The ORNL 1993 summer student internship program was completed. Plans were made for expanding the program to support 8 students next summer. Leonard Price, a Xavier University Chemistry professor and John Walz, a Tulane University Engineering professor each spent 5 weeks at ORNL. During this time these faculty worked with ORNL researchers exploring mutual interests and discussing possible future collaborations. In September, Drs. Carl Gehrs, Lee Shugart and Marshall Adams of ORNL, visited the Tulane and Xavier campuses. They presented two seminars and met with several of the investigators being supported by the ERWM contract. Tulane/Xavier project administrators participated in the Office of Technology Development`s ``New Technologies and Program Exhibition`` in the Rayburn House Office Building on September 23 and in the Hart Senate Office Building on September 27.« less

  6. Thrust Area Report, Engineering Research, Development and Technology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Programmore » has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.« less

  7. The selection of the American-Polish joint venture projects for the Krakow program and results of the efforts to date

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gyorke, D.F.; Butcher, T.A.

    1995-12-31

    To implement the Krakow Clean Fossil Fuels and Energy Efficiency Program, eight U.S. firms were selected by the U.S. Department of Energy to market their technologies to reduce pollution from low emission sources in Krakow. The eight U.S. firms were selected by a competitive solicitation that required the proposing firms to themselves provide funding to match or exceed the funding provided by the Program. These U.S. firms and their Polish partner companies have begun sales and cooperative work efforts in Krakow, and some have already made initial equipment installations with measurable performance improvements. Following their efforts as part of themore » Program, these U.S.-Polish joint ventures will market their technologies and achieve the associated environmental benefits elsewhere in Poland and Eastern and Central Europe. As part of the Krakow Program a spreadsheet model was developed to compare technological options for supplying heat to the city by calculation and comparing the heating costs and associated emissions reduction for each option. Comparison of options is made on the basis of the user cost-per-metric ton of equivalent emissions reduction. For all options considered in the Krakow Program, this cost parameter has ranged from -$1469 (best) to $2650 (worst). The costs for technologies associated with the eight projects in the Krakow Program are at the lower end of this range placing these technologies among the most cost effective solutions to the pollution problems from the low emission sources.« less

  8. HSR Overview

    NASA Technical Reports Server (NTRS)

    Hendricks, R. C.; Steinetz, B. M.

    2006-01-01

    The leading Aeronautics program within NASA is the High Speed Research Program (HSR). The HSR program's highest priorities are high pay-off technologies for airframe and propulsion systems required for a high speed civil transport (HSCT). These priorities have been developed collaboratively with NASA, FAA and the US Industry (Boeing-McDonnell Douglas, Pratt & Whitney and General Electric). Phase one of the HSR program started on 1990, and concentrated on the environmental challenges of minimizing NOx and noise. The first program goal is to reduce the NOx emission index to less than 5 (Concord NOx index is 20 and is unacceptable), in order to have little impact on the earth's ozone layer. The second goal is to reduce noise levels to FAR Stage 3 (or better), comparable to those of subsonic aircraft (far below the Concorde noise levels that require exemptions form less stringent standards). This requirement greatly impacts the nozzle design increasing its length and complexity and poses unique sealing challenges. Phase two started in 1993 and initiated work on the technologies required for an economical HSCT. Materials technologies under development include a ceramic-matrix-composite combustion liner, lightweight materials for the nozzle, as well long-life turbomachinery disk and blade alloys. Other required materials are being developed under the DOD-IHPTET program, where there is close cooperation. Economic goals translate into the development of technologies for tri-class service, 5000 nautical mile range aircraft with a ticket price no more than 20% over the subsonic ticket price. The potential market could be as large as 1500 aircraft, according to a Boeing study. Technology alone will not enable this airplane, yet without enabling technologies "on the shelf", it will not occur. The HSCT engine will be the largest engine ever built and operate at maximum conditions for long periods of time posing a number of challenges. The HSR engine mission requires that rotating equipment stay at take-off condition temperatures for hours not minutes per flight. Hence rotating equipment and seals must operate for many thousands of hours at extreme temperatures. It is anticipated that the nozzle will be 12 feet long and roughly 4 ft. by 5 ft. in cross-section with a nominal airflow of 800 lbs/sec. The complex function of the nozzle (including an ejector for noise attenuation) combined with long life place new demands on nozzle seal design. Three inlet configurations are under consideration with attendant sealing challenges, as will be illustrated herein. Four of these engines are required to propel a 5000 nautical mile class vehicle which demand that component reliability be at the highest possible level. In response, an HSR seals session was implemented as a part of the 1997-Seals and Secondary Flow Workshop. Overview presentations were given for each of the following areas: inlet, turbomachinery, combustor and nozzle. The HSCT seal issues center on durability and efficiency of rotating equipment seals (including brush seals), structural seals (including rope seals and other advanced concepts), and high-speed bearing and sump seals. Tighter clearances, propulsion system size and thermal requirements represent extremes that challenge the component designers. This document provides an initial step toward defining HSR seal needs. The overview for HSR seal designs includes, defining seal objectives, summarizing sealing and materials requirements, presenting relevant seal cross-sections, and identifying technology needs for the HSR office.

  9. Summary of Current and Future MSFC International Space Station Environmental Control and Life Support System Activities

    NASA Technical Reports Server (NTRS)

    Ray, Charles D.; Carrasquillo, Robyn L.; Minton-Summers, Silvia

    1997-01-01

    This paper provides a summary of current work accomplished under technical task agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the Environmental Control and Life Support System (ECLSS) as well as future planning activities in support of the International Space Station (ISS). Current activities include ECLSS computer model development, component design and development, subsystem integrated system testing, life testing, and government furnished equipment delivered to the ISS program. A long range plan for the MSFC ECLSS test facility is described whereby the current facility would be upgraded to support integrated station ECLSS operations. ECLSS technology development efforts proposed to be performed under the Advanced Engineering Technology Development (AETD) program are also discussed.

  10. An airborne remote sensing platform of the Helsinki University of Technology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nikulainen, M.; Hallikainen, M.; Kemppinen, M.

    1996-10-01

    In 1994 Helsinki University of Technology acquired a Short SC7 Skyvan turboprop aircraft to be modified to carry remote sensing instruments. As the aircraft is originally designed to carry heavy and space consuming cargo, a modification program was implemented to make the aircraft feasible for remote sensing operations. The twelve-month long modification program had three design objectives: flexibility, accessibility and cost efficiency. The aircraft interior and electrical system were modified. Furthermore, the aircraft is equipped with DGPS-navigation system, multi-channel radiometer system and side looking airborne radar. Future projects include installation of local area network, attitude GPS system, imaging spectrometer andmore » 1.4 GHz radiometer. 6 refs., 5 figs., 1 tab.« less

  11. Machine‐Assisted Organic Synthesis

    PubMed Central

    Fitzpatrick, Daniel E.; Myers, Rebecca M.; Battilocchio, Claudio; Ingham, Richard. J.

    2015-01-01

    Abstract In this Review we describe how the advent of machines is impacting on organic synthesis programs, with particular emphasis on the practical issues associated with the design of chemical reactors. In the rapidly changing, multivariant environment of the research laboratory, equipment needs to be modular to accommodate high and low temperatures and pressures, enzymes, multiphase systems, slurries, gases, and organometallic compounds. Additional technologies have been developed to facilitate more specialized reaction techniques such as electrochemical and photochemical methods. All of these areas create both opportunities and challenges during adoption as enabling technologies. PMID:26193360

  12. Mapping of Submerged Aquatic Vegetation Using Autonomous Underwater Vehicles in Nearshore Regions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jones, Mark E.; Miller, Lee M.; Woodruff, Dana L.

    2007-10-02

    The use of an autonomous underwater vehicle (AUV) equipped with sidescan sonar was investigated for determining the boundaries of nearshore submerged aquatic vegetation beds, specifically eelgrass (Zostera marina). Shifts in eelgrass bed morphology, size, and distribution are used as indicators in monitoring programs to measure the impacts of coastal development and environmental stressors on eelgrass and to establish the efficacy of restoration programs. However, many monitoring programs necessarily extend over multiple-year time periods. Therefore, techniques that are easily reproducible, accurate, and cost-effective can demonstrate distinct advantages over some of the more traditional and labor-intensive methods, such as diver assessments andmore » transects of shoot counts. Remote monitoring of eelgrass beds using satellite and aerial imagery has been demonstrated with moderate success, but requires groundtruthing, which can be costly and which frequently cannot delineate the deeper boundaries of eelgrass beds. One possible means for low-cost mapping is the use of AUVs equipped with acoustic imaging hardware. AUVs provide an ideal platform, because they can be deployed by small teams (two people), they are highly maneuverable, they can cover large areas over a relatively short time period (3knot operational speed), and they are equipped with multiple oceanographic instruments for correlated data collection. This paper describes the use of sidescan-equipped AUV technology deployed over multiple time periods at the same location where imagery of eelgrass beds was obtained and analyzed for comparative purposes.« less

  13. The Role of Junior Colleges in Educational Programs in Radiologic Technology.

    ERIC Educational Resources Information Center

    Soule, A. Bradley

    Recent Department of Labor and Public Health Service reports indicate that there are presently 72,000 people operating x-ray equipment in this country of whom 33,000 are registered technologists. It is estimated that by 1975 there will be a need for 100,000 technologists of whom at least 52,000 should be fully trained. Almost all formally trained…

  14. 2010 Army Modernization Strategy

    DTIC Science & Technology

    2010-01-01

    Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions...Science and Technology (S&T) Program, and shortening the time between requirement identification and solution delivery. • Continuously modernize equipment...available, as quickly as possible, so they can succeed anywhere, every time . Our Soldiers deserve nothing less. Army Strong! U.S. Soldiers engage enemy

  15. 1-to-1 Computing: A Measure of Success

    ERIC Educational Resources Information Center

    O'Hanlon, Charlene

    2007-01-01

    When Texas' Technology Immersion Project began in the spring of 2004, a grant from the US Department of Education allowed a parallel project to launch--eTxTIP--to evaluate and measure the success of the program, which equips middle school students in high-risk, high-need areas with laptops. Data is beginning to come in on several of the first…

  16. JPRS Report. Science & Technology, USSR: Engineering & Equipment.

    DTIC Science & Technology

    1988-12-19

    unlimited Science & Technology USSR: Engineering & Equipment ^PRODUCED BY ^J’ODNALTECSL OF AMERCE SPR/NGnEL^ff’^1-INFORMATION S 22161 SERVICE...rv> DTIC QUALITY mSHBOTSD j5 Science & Technology USSR: Engineering & Equipment JPRS-UEQ-88-006 CONTENTS 19 DECEMBER 1988 Nuclear Energy Fuel...PROMYSHLENNOST, No 4, Apr 88] 36 Determining the Demand for Automated Foundry Equipment [A.A. Panov; MEKHAN1ZATS1YA IAVTOMATIZATSIYA PROIZVODSTVA, Apr 88] 40

  17. Data center cooling system

    DOEpatents

    Chainer, Timothy J; Dang, Hien P; Parida, Pritish R; Schultz, Mark D; Sharma, Arun

    2015-03-17

    A data center cooling system may include heat transfer equipment to cool a liquid coolant without vapor compression refrigeration, and the liquid coolant is used on a liquid cooled information technology equipment rack housed in the data center. The system may also include a controller-apparatus to regulate the liquid coolant flow to the liquid cooled information technology equipment rack through a range of liquid coolant flow values based upon information technology equipment temperature thresholds.

  18. Aquatic Equipment Information.

    ERIC Educational Resources Information Center

    Sova, Ruth

    Equipment usually used in water exercise programs is designed for variety, intensity, and program necessity. This guide discusses aquatic equipment under the following headings: (1) equipment design; (2) equipment principles; (3) precautions and contraindications; (4) population contraindications; and (5) choosing equipment. Equipment is used…

  19. Performance and economic evaluation of the seahorse natural gas hot water heater conversion at Fort Stewart. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Winiarski, D.W.

    1995-12-01

    The Federal government is the largest single energy consumer in the United States with consumption of nearly 1.5 quads/year of energy (10{sup 15} quad = 1015 Btu) and cost valued at nearly $10 billion annually. The US Department of Energy`s (DOE) Federal Energy Management Program (FEMP) supports efforts to reduce energy use and associated expenses in the Federal sector. One such effort, the New Technology Demonstration Program (NTDP) seeks to evaluate new energy -- saving US technologies and secure their more timely adoption by the US government. Pacific Northwest Laboratory (PNL) is one of four DOE laboratories that participate inmore » the New Technologies Demonstration Program, providing technical expertise and equipment to evaluate new, energy-saving technologies being studied under that program. This report provides the results of a field evaluation that PNL conducted for DOE/FEMP with funding support from the US Department of Defense (DoD) Strategic Environmental Research and Development Program (SERDP) to examine the performance of 4 candidate energy-saving technology-a water heater conversion system to convert electrically powered water heaters to natural gas fuel. The unit was installed at a single residence at Fort Stewart, a US Army base in Georgia, and the performance was monitored under the NTDP. Participating in this effort under a Cooperative Research and Development Agreement (CRADA) were Gas Fired Products, developers of the technology; the Public Service Company of North Carolina; Atlanta Gas Light Company; the Army Corps of Engineers; Fort Stewart; and Pacific Northwest Laboratory.« less

  20. Object-oriented programming for the biosciences.

    PubMed

    Wiechert, W; Joksch, B; Wittig, R; Hartbrich, A; Höner, T; Möllney, M

    1995-10-01

    The development of software systems for the biosciences is always closely connected to experimental practice. Programs must be able to handle the inherent complexity and heterogeneous structure of biological systems in combination with the measuring equipment. Moreover, a high degree of flexibility is required to treat rapidly changing experimental conditions. Object-oriented methodology seems to be well suited for this purpose. It enables an evolutionary approach to software development that still maintains a high degree of modularity. This paper presents experience with object-oriented technology gathered during several years of programming in the fields of bioprocess development and metabolic engineering. It concentrates on the aspects of experimental support, data analysis, interaction and visualization. Several examples are presented and discussed in the general context of the experimental cycle of knowledge acquisition, thus pointing out the benefits and problems of object-oriented technology in the specific application field of the biosciences. Finally, some strategies for future development are described.

  1. Hanford High-Level Waste Vitrification Program at the Pacific Northwest National Laboratory: technology development - annotated bibliography

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larson, D.E.

    1996-09-01

    This report provides a collection of annotated bibliographies for documents prepared under the Hanford High-Level Waste Vitrification (Plant) Program. The bibliographies are for documents from Fiscal Year 1983 through Fiscal Year 1995, and include work conducted at or under the direction of the Pacific Northwest National Laboratory. The bibliographies included focus on the technology developed over the specified time period for vitrifying Hanford pretreated high-level waste. The following subject areas are included: General Documentation; Program Documentation; High-Level Waste Characterization; Glass Formulation and Characterization; Feed Preparation; Radioactive Feed Preparation and Glass Properties Testing; Full-Scale Feed Preparation Testing; Equipment Materials Testing; Meltermore » Performance Assessment and Evaluations; Liquid-Fed Ceramic Melter; Cold Crucible Melter; Stirred Melter; High-Temperature Melter; Melter Off-Gas Treatment; Vitrification Waste Treatment; Process, Product Control and Modeling; Analytical; and Canister Closure, Decontamination, and Handling« less

  2. European Union RACE program contributions to digital audiovisual communications and services

    NASA Astrophysics Data System (ADS)

    de Albuquerque, Augusto; van Noorden, Leon; Badique', Eric

    1995-02-01

    The European Union RACE (R&D in advanced communications technologies in Europe) and the future ACTS (advanced communications technologies and services) programs have been contributing and continue to contribute to world-wide developments in audio-visual services. The paper focuses on research progress in: (1) Image data compression. Several methods of image analysis leading to the use of encoders based on improved hybrid DCT-DPCM (MPEG or not), object oriented, hybrid region/waveform or knowledge-based coding methods are discussed. (2) Program production in the aspects of 3D imaging, data acquisition, virtual scene construction, pre-processing and sequence generation. (3) Interoperability and multimedia access systems. The diversity of material available and the introduction of interactive or near- interactive audio-visual services led to the development of prestandards for video-on-demand (VoD) and interworking of multimedia services storage systems and customer premises equipment.

  3. Space processing applications payload equipment study. Volume 2E: Commercial equipment utility

    NASA Technical Reports Server (NTRS)

    Smith, A. G. (Editor)

    1974-01-01

    Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.

  4. Developing a UAS Program for Electric Utilities

    NASA Astrophysics Data System (ADS)

    Keltgen, James

    New innovations and technologies using unmanned aerial systems (UAS), or drones, have created unique opportunities for commercial applications. Electric utilities, likewise, realize the benefits of using UAS as a tool in electric utility operations. Although the opportunities exist, establishing a UAS program for electric utilities is largely an endeavor of trial and error or research and development with no clear path defined on how to establish a UAS program. By reviewing UAS use case examples and integrating lessons learned with Federal Aviation Administration (FAA) regulations, UAS best practices, unique electric utility values, legal and insurance perspectives, equipment selection, and thoughtful planning and preparation; a solution model is developed to establish a UAS program for electric utilities.

  5. High-throughput manufacturing of thin-film CdS/CdTe photovoltaic modules. Annual subcontract report, 16 November 1994--15 November 1995

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sandwisch, D.W.

    1997-02-01

    The objectives of this subcontract are to advance Solar Cells, Inc.`s (SCI`s) photovoltaic manufacturing technologies, reduce module production costs, increase module performance, and provide the groundwork for SCI to expand its commercial production capacities. Activities during the second year of the program concentrated on process development, equipment design and testing, quality assurance, and ES and H programs. These efforts broadly addressed the issues of the manufacturing process for producing thin-film monolithic CdS/CdTe photovoltaic modules.

  6. NASA's mobile satellite development program

    NASA Technical Reports Server (NTRS)

    Rafferty, William; Dessouky, Khaled; Sue, Miles

    1988-01-01

    A Mobile Satellite System (MSS) will provide data and voice communications over a vast geographical area to a large population of mobile users. A technical overview is given of the extensive research and development studies and development performed under NASA's mobile satellite program (MSAT-X) in support of the introduction of a U.S. MSS. The critical technologies necessary to enable such a system are emphasized: vehicle antennas, modulation and coding, speech coders, networking and propagation characterization. Also proposed is a first, and future generation MSS architecture based upon realized ground segment equipment and advanced space segment studies.

  7. KSC-99pp1061

    NASA Image and Video Library

    1999-08-23

    A worker takes a measurement for construction of the Reusable Launch Vehicle (RLV) complex at KSC. Located near the Shuttle Landing Facility, the complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  8. KSC-99pp1063

    NASA Image and Video Library

    1999-08-23

    At the construction site of the Reusable Launch Vehicle (RLV) complex at KSC, workers take measurements for one of the buildings. Located near the Shuttle Landing Facility, the complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  9. KSC-00pp0725

    NASA Image and Video Library

    2000-06-02

    This closeup photo shows the Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. At right is a multi-purpose hangar and to the left is a building for related ground support equipment and administrative/ technical support. The complex is situated at the Shuttle Landing Facility. The RLV complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA’s Space Shuttle Program and KSC

  10. KSC00pp0725

    NASA Image and Video Library

    2000-06-02

    This closeup photo shows the Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. At right is a multi-purpose hangar and to the left is a building for related ground support equipment and administrative/ technical support. The complex is situated at the Shuttle Landing Facility. The RLV complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA’s Space Shuttle Program and KSC

  11. KSC-99pp1261

    NASA Image and Video Library

    1999-10-29

    The support building at the $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center takes form. It will house related ground support equipment and administrative/technical support. The RLV complex includes a multi-purpose hangar that will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  12. KSC-99pp1062

    NASA Image and Video Library

    1999-08-23

    At the construction site of the Reusable Launch Vehicle (RLV) complex at KSC, a worker takes a measurement. Located near the Shuttle Landing Facility, the complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  13. KSC-99pp1060

    NASA Image and Video Library

    1999-08-23

    Construction is under way for the X-33/X-34 hangar complex near the Shuttle Landing Facility at KSC. The Reusable Launch Vehicle (RLV) complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  14. Autonomous rendezvous and capture development infrastructure

    NASA Technical Reports Server (NTRS)

    Bryan, Thomas C.

    1991-01-01

    In the development of the technology for autonomous rendezvous and docking, key infrastructure capabilities must be used for effective and economical development. This need involves facility capabilities, both equipment and personnel, to devise, develop, qualify, and integrate ARD elements and subsystems into flight programs. One effective way of reducing technical risks in developing ARD technology is the use of the Low Earth Orbit test facility. Using a reusable free-flying testbed carried in the Shuttle, as a technology demonstration test flight, can be structured to include a variety of sensors, control schemes, and operational approaches. This testbed and flight demonstration concept will be used to illustrate how technologies and facilities at MSFC can be used to develop and prove an ARD system.

  15. Final Technical Report. Training in Building Audit Technologies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brosemer, Kathleen

    In 2011, the Tribe proposed and was awarded the Training in Building Audit Technologies grant from the DOE in the amount of $55,748 to contract for training programs for infrared cameras, blower door technology applications and building systems. The coursework consisted of; Infrared Camera Training: Level I - Thermal Imaging for Energy Audits; Blower Door Analysis and Building-As-A-System Training, Building Performance Institute (BPI) Building Analyst; Building Envelope Training, Building Performance Institute (BPI) Envelope Professional; and Audit/JobFLEX Tablet Software. Competitive procurement of the training contractor resulted in lower costs, allowing the Tribe to request and receive DOE approval to additionally purchasemore » energy audit equipment and contract for residential energy audits of 25 low-income Tribal Housing units. Sault Tribe personnel received field training to supplement the classroom instruction on proper use of the energy audit equipment. Field experience was provided through the second DOE energy audits grant, allowing Sault Tribe personnel to join the contractor, Building Science Academy, in conducting 25 residential energy audits of low-income Tribal Housing units.« less

  16. LIEKKI -- Combustion and gasification research in Finland 1988--1998

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hupa, M.; Matinlinna, J.

    1996-12-31

    The objective of the Combustion and Gasification Research Program LIEKKI is to develop environmentally sound energy production techniques that are based on combustion and/or gasification. The research supports equipment manufacturers in Finland as they develop and improve their top export products, such as the fluidized bed boilers, black liquor recovery boilers, and heavy diesel power plants. The research is also heavily focused on new techniques not yet on the market, ones with higher efficiency of electricity production and, simultaneously, significantly simpler emission control systems. The most important concepts here include combustors or gasifiers based on fluidized bed technology at elevatedmore » pressures. At present the LIEKKI program includes 49 research projects and it connects some 150 scientists and research engineers in the universities and research centers of Finland. The overall annual budget of the program has been around 10 Mill. USD, co-funded by the industry and the government agency TEKES (Technology Development Centre) in Finland. The program is coordinated by Aabo Akademi University in Turku, Finland.« less

  17. Microwave power transmission system studies. Volume 4: Sections 9 through 14 with appendices. [ground tests and antenna design

    NASA Technical Reports Server (NTRS)

    Maynard, O. E.; Brown, W. C.; Edwards, A.; Haley, J. T.; Meltz, G.; Howell, J. M.; Nathan, A.

    1975-01-01

    The microwave rectifier technology, approaches to the receiving antenna, topology of rectenna circuits, assembly and construction, ROM cost estimates are discussed. Analyses and cost estimates for the equipment required to transmit the ground power to an external user. Noise and harmonic considerations are presented for both the amplitron and klystron and interference limits are identified and evaluated. The risk assessment discussion is discussed wherein technology risks are rated and ranked with regard to their importance in impacting the microwave power transmission system. The system analyses and evaluation are included of parametric studies of system relationships pertaining to geometry, materials, specific cost, specific weight, efficiency, converter packing, frequency selection, power distribution, power density, power output magnitude, power source, transportation and assembly. Capital costs per kW and energy costs as a function of rate of return, power source and transportation costs as well as build cycle time are presented. The critical technology and ground test program are discussed along with ROM costs and schedule. The orbital test program with associated critical technology and ground based program based on full implementation of the defined objectives is discussed.

  18. Technology and the future of medical equipment maintenance.

    PubMed

    Wear, J O

    1999-05-01

    Maintenance of medical equipment has been changing rapidly in the past few years. It is changing more rapidly in developed countries, but changes are also occurring in developing countries. Some of the changes may permit improved maintenance on the higher technology equipment in developing countries, since they do not require onsite expertise. Technology has had an increasing impact on the development of medical equipment with the increased use of microprocessors and computers. With miniaturization from space technology and electronic chip design, powerful microprocessors and computers have been built into medical equipment. The improvement in manufacturing technology has increased the quality of parts and therefore the medical equipment. This has resulted in increased mean time between failures and reduced maintenance needs. This has made equipment more reliable in remote areas and developing countries. The built-in computers and advances in software design have brought about self-diagnostics in medical equipment. The technicians now have a strong tool to be used in maintenance. One problem in this area is getting access to the self-diagnostics. Some manufacturers will not readily provide this access to the owner of the equipment. Advances in telecommunications in conjunction with self-diagnostics make available remote diagnosis and repair. Since components can no longer be repaired, a remote repair technician can instruct an operator or an on-site repairman on board replacement. In case of software problems, the remote repair technician may perform the repairs over the telephone. It is possible for the equipment to be monitored remotely by modern without interfering with the operation of the equipment. These changes in technology require the training of biomedical engineering technicians (BMETs) to change. They must have training in computers and telecommunications. Some of this training can be done with telecommunications and computers.

  19. Technology of short-distance wireless communication and its application based on equipment support

    NASA Astrophysics Data System (ADS)

    Yu, Yang; Zheng, Liping; Zhu, Jianjie; Cao, Yingxiu; Hu, Bei

    2018-04-01

    This paper briefly introduces some common short-region wireless communication technologies, comprehensively compares the application characteristics of each technology, and summarizes the application prospect of these technologies in equipment support.

  20. Prioritizing equipment for replacement.

    PubMed

    Capuano, Mike

    2010-01-01

    It is suggested that clinical engineers take the lead in formulating evaluation processes to recommend equipment replacement. Their skill, knowledge, and experience, combined with access to equipment databases, make them a logical choice. Based on ideas from Fennigkoh's scheme, elements such as age, vendor support, accumulated maintenance cost, and function/risk were used.6 Other more subjective criteria such as cost benefits and efficacy of newer technology were not used. The element of downtime was also omitted due to the data element not being available. The resulting Periop Master Equipment List and its rationale was presented to the Perioperative Services Program Council. They deemed the criteria to be robust and provided overwhelming acceptance of the list. It was quickly put to use to estimate required capital funding, justify items already thought to need replacement, and identify high-priority ranked items for replacement. Incorporating prioritization criteria into an existing equipment database would be ideal. Some commercially available systems do have the basic elements of this. Maintaining replacement data can be labor-intensive regardless of the method used. There is usually little time to perform the tasks necessary for prioritizing equipment. However, where appropriate, a clinical engineering department might be able to conduct such an exercise as shown in the following case study.

  1. Primary Discussion on Standardized Management of Purchasing Large Equipments for Measurement Technology Institution

    NASA Astrophysics Data System (ADS)

    Hu, Chang; Hu, Juanli; Zhou, Qi; Yang, Yue

    In view of current situation and existing problem on purchasing equipment for measurement technology institution, this paper analyzes key factors that affect the standardization of equipment procurement and it proposes a set of scientific and standardized solutions for equipment procurement based on actual work.

  2. Welding, Bonding and Fastening, 1984

    NASA Technical Reports Server (NTRS)

    Buckley, J. D. (Editor); Stein, B. A. (Editor)

    1985-01-01

    A compilation of papers presented in a joint NASA, American Society for Metals, The George Washington University, American Welding Soceity, and Society of Manufacturing Engineers conference on Welding, Bonding, and Fastening at Langley Research Center, Hampton, VA, on October 23 to 25, 1984 is given. Papers were presented on technology developed in current research programs relevant to welding, bonding, and fastening of structural materials required in fabricating structures and mechanical systems used in the aerospace, hydrospace, and automotive industries. Topics covered in the conference included equipment, hardware and materials used when welding, brazing, and soldering, mechanical fastening, explosive welding, use of unique selected joining techniques, adhesives bonding, and nondestructive evaluation. A concept of the factory of the future was presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding.

  3. Geothermal Program Review XIV: proceedings. Keeping Geothermal Energy Competitive in Foreign and Domestic Markets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    The U.S. Department of Energy`s Office of Geothermal Technologies conducted its annual Program Review XIV in Berkeley, April 8-10, 1996. The geothermal community came together for an in-depth review of the federally-sponsored geothermal research and development program. This year`s theme focused on ``Keeping Geothermal Energy Competitive in Foreign and Domestic Markets.`` This annual conference is designed to promote technology transfer by bringing together DOE-sponsored researchers; utility representatives; geothermal developers; equipment and service suppliers; representatives from local, state, and federal agencies; and others with an interest in geothermal energy. Program Review XIV consisted of eight sessions chaired by industry representatives. Introductorymore » and overview remarks were presented during every session followed by detailed reports on specific DOE-funded research projects. The progress of R&D projects over the past year and plans for future activities were discussed. The government-industry partnership continues to strengthen -- its success, achievements over the past twenty years, and its future direction were highlighted throughout the conference. The comments received from the conference evaluation forms are published in this year`s proceedings. Individual papers have been processed for inclusion in the Energy Science and Technology Database.« less

  4. USSR Report: Machine Tools and Metalworking Equipment.

    DTIC Science & Technology

    1986-01-23

    between satellite stop and the camshaft of the programer unit. The line has 23 positions including 12 automatic ones. Specification of line Number...technological, processes, automated research, etc.) are as follows.: a monochannel based on a shared trunk line, ring, star and tree (polychannel...line or ring networks based on decentralized control of data exchange between subscribers are very robust. A tree -form network has star structure

  5. Flight Controller Software Protects Lightweight Flexible Aircraft

    NASA Technical Reports Server (NTRS)

    2015-01-01

    Lightweight flexible aircraft may be the future of aviation, but a major problem is their susceptibility to flutter-uncontrollable vibrations that can destroy wings. Armstrong Flight Research Center awarded SBIR funding to Minneapolis, Minnesota-based MUSYN Inc. to develop software that helps program flight controllers to suppress flutter. The technology is now available for aircraft manufacturers and other industries that use equipment with automated controls.

  6. A Case Study of the NATO Identification System (NIS) Codevelopment Program

    DTIC Science & Technology

    1988-09-01

    the otherhand are unrelated to the military equipment being purchased. These offsets include foreign investment, technology transfer, and countertrade ...manufacturer and a foreign entity. 6. Countertrade - a transaction that specifies the exchange of selected goods and services for another of equivalent...arrangements. In fact, U.S. agencies are permitted to provide advisory and marketing intelligence services to U.S. exporters involved in countertrade

  7. For multidisciplinary research on the application of remote sensing to water resources problems. [including crop yield, watershed soils, and vegetation mapping in Wisconsin

    NASA Technical Reports Server (NTRS)

    Kiefer, R. W. (Principal Investigator)

    1979-01-01

    Research on the application of remote sensing to problems of water resources was concentrated on sediments and associated nonpoint source pollutants in lakes. Further transfer of the technology of remote sensing and the refinement of equipment and programs for thermal scanning and the digital analysis of images were also addressed.

  8. Acquisition of Equipment for Research in Nanobiomedical Technologies

    DTIC Science & Technology

    2008-05-29

    Equipment for Research in Nanobiomedical Technologies Contract/Grant #: FA9550-07-1-0065 Reporting Period: 01/01/07 to 12/31/07 From: Ilesanmi Adesida...of Equipment for Research in Nanobiomedical Technologies Ilesanmi Adesida, ECE/MNTL/CNST; PI; co-PIs: Brian Cunningham, Irfan Ahmad, Taher Saif...University of Illinois Center for Nanoscale Science and Technology (CNST) has been leading the way in facilitating research leading to the development of

  9. Electromagnetic compatibility of PLC adapters for in-home/domestic networks

    NASA Astrophysics Data System (ADS)

    Potisk, Lukas; Hallon, Jozef; Orgon, Milos; Fujdiak, Radek

    2018-01-01

    The use of programable logic controllers (PLC) technology in electrical networks 230 V causes electromagnetic radiation that interferes with other electrical equipment connected to the network [1-4]. Therefore, this article describes the issues of electromagnetic compatibility (EMC) of new PLC adapters used in IP broadband services in a multi-user environment. The measurements of disturbing electromagnetic field originated in PLC adapters were made in a certified laboratory EMC (laboratory of electromagnetic compatibility) in the Institute of Electrical Engineering at Faculty of Electrical Engineering and Information Technology of the Slovak University of Technology in Bratislava. The measured spectra of the radiated electromagnetic field will be compared with the results obtained when testing older PLC modems [5].

  10. 45 CFR 95.707 - Equipment management and disposition.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 1 2011-10-01 2011-10-01 false Equipment management and disposition. 95.707... ADMINISTRATION-GRANT PROGRAMS (PUBLIC ASSISTANCE, MEDICAL ASSISTANCE AND STATE CHILDREN'S HEALTH INSURANCE PROGRAMS) Equipment Acquired Under Public Assistance Programs § 95.707 Equipment management and disposition...

  11. 45 CFR 95.707 - Equipment management and disposition.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Equipment management and disposition. 95.707... ADMINISTRATION-GRANT PROGRAMS (PUBLIC ASSISTANCE, MEDICAL ASSISTANCE AND STATE CHILDREN'S HEALTH INSURANCE PROGRAMS) Equipment Acquired Under Public Assistance Programs § 95.707 Equipment management and disposition...

  12. IFLA General Conference, 1987. Division of Management and Technology. Library Building and Equipment Section. Information Technology Section. Papers.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    The six papers in this collection focus on library buildings and equipment and information technology: (1) "Library Equipment in a Changing Library Environment" (Margaret Beckman, Canada); (2) "The New Building for the British Library" (Colin St. John Wilson, United Kingdom); (3) "User Interaction with Online Catalogue" (Stephen Walker, United…

  13. Laboratory services series: a programmed maintenance system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tuxbury, D.C.; Srite, B.E.

    1980-01-01

    The diverse facilities, operations and equipment at a major national research and development laboratory require a systematic, analytical approach to operating equipment maintenance. A computer-scheduled preventive maintenance program is described including program development, equipment identification, maintenance and inspection instructions, scheduling, personnel, and equipment history.

  14. [A design of software for management of hospital equipment maintenance process].

    PubMed

    Xie, Haiyuan; Liu, Yiqing

    2010-03-01

    According to the circumstance of hospital equipment maintenance, we designed a computer program for management of hospital equipment maintenance process by Java programming language. This program can control the maintenance process, increase the efficiency; and be able to fix the equipment location.

  15. Medical technology in India: Tracing policy approaches.

    PubMed

    Chakravarthi, Indira

    2013-01-01

    Medical devices and equipment have become an indispensable part of modern medical practice. Yet these medical technologies receive scant attention in the Indian context, both at the health policy level and as an area of study. There has been little attempt to systematically address the issue of equipment based medical technologies and how to regulate their use. There is paucity of primary data on the kind of medical equipment and techniques being introduced, on their need and relative usefulness, reliability, patterns of utilization, on their production, procurement, distribution, costs, and accessibility. This article reviews some of the policy issues relating to equipment based medical technology in India, in light of the specific choices and policies made during and after the colonial period in favour of modern medicine and a technology-based public health system, attempts at self-sufficiency and the current international environment with respect to the medical equipment and health-care industry.

  16. Polymer Chemistry

    NASA Technical Reports Server (NTRS)

    Williams, Martha; Roberson, Luke; Caraccio, Anne

    2010-01-01

    This viewgraph presentation describes new technologies in polymer and material chemistry that benefits NASA programs and missions. The topics include: 1) What are Polymers?; 2) History of Polymer Chemistry; 3) Composites/Materials Development at KSC; 4) Why Wiring; 5) Next Generation Wiring Materials; 6) Wire System Materials and Integration; 7) Self-Healing Wire Repair; 8) Smart Wiring Summary; 9) Fire and Polymers; 10) Aerogel Technology; 11) Aerogel Composites; 12) Aerogels for Oil Remediation; 13) KSC's Solution; 14) Chemochromic Hydrogen Sensors; 15) STS-130 and 131 Operations; 16) HyperPigment; 17) Antimicrobial Materials; 18) Conductive Inks Formulations for Multiple Applications; and 19) Testing and Processing Equipment.

  17. Airborne Wind Shear Detection and Warning Systems: Fourth Combined Manufacturers' and Technologists' Conference, part 1

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

    1992-01-01

    The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document was compiled to record the essence of the technology updates and discussions which follow each.

  18. Desulfurization of gasoline.

    PubMed Central

    Berger, J E

    1975-01-01

    Although gasoline blending streams exhibit widely varying sulfur concentrations, significant quantities of low-sulfur motor gasoline cannot be manufactured by reallocation of existing components without substantial sacrifices in the useful properties of the remaining fuels having normal sulfur levels. To meet the anticipated demand for low-sulfur unleaded gasoline which may be required for catalyst-equipped automobiles it will be necessary to install process equipment based on known hydrotreating technology. The effects which this construction program would exert on the activities, abilities and needs of one petroleum refiner are sketched for two degrees of sulfur removal. The impacts of installing the process facilities which would be necessary are discussed in terms of time requirements, capital needs, and added energy expenditures. PMID:1157782

  19. System design optimization for stand-alone photovoltaic systems sizing by using superstructure model

    NASA Astrophysics Data System (ADS)

    Azau, M. A. M.; Jaafar, S.; Samsudin, K.

    2013-06-01

    Although the photovoltaic (PV) systems have been increasingly installed as an alternative and renewable green power generation, the initial set up cost, maintenance cost and equipment mismatch are some of the key issues that slows down the installation in small household. This paper presents the design optimization of stand-alone photovoltaic systems using superstructure model where all possible types of technology of the equipment are captured and life cycle cost analysis is formulated as a mixed integer programming (MIP). A model for investment planning of power generation and long-term decision model are developed in order to help the system engineer to build a cost effective system.

  20. Project LASER

    NASA Technical Reports Server (NTRS)

    1990-01-01

    NASA formally launched Project LASER (Learning About Science, Engineering and Research) in March 1990, a program designed to help teachers improve science and mathematics education and to provide 'hands on' experiences. It featured the first LASER Mobile Teacher Resource Center (MTRC), is designed to reach educators all over the nation. NASA hopes to operate several MTRCs with funds provided by private industry. The mobile unit is a 22-ton tractor-trailer stocked with NASA educational publications and outfitted with six work stations. Each work station, which can accommodate two teachers at a time, has a computer providing access to NASA Spacelink. Each also has video recorders and photocopy/photographic equipment for the teacher's use. MTRC is only one of the five major elements within LASER. The others are: a Space Technology Course, to promote integration of space science studies with traditional courses; the Volunteer Databank, in which NASA employees are encouraged to volunteer as tutors, instructors, etc; Mobile Discovery Laboratories that will carry simple laboratory equipment and computers to provide hands-on activities for students and demonstrations of classroom activities for teachers; and the Public Library Science Program which will present library based science and math programs.

  1. 78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-03

    .... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment... Certain Industrial Equipment,'' a program covering certain commercial and industrial equipment (hereafter... (AEMTCA), Public Law 112-210 (Dec. 18, 2012). EPCA covers many types of commercial and industrial...

  2. Hydrazine Catalyst Production: Sustaining S-405 Technology

    NASA Technical Reports Server (NTRS)

    Wucherer, E. J.; Cook, Timothy; Stiefel, Mark; Humphries, Randy, Jr.; Parker, Janet

    2003-01-01

    The development of the iridium-based Shell 405 catalyst for spontaneous decomposition of hydrazine was one of the key enabling technologies for today's spacecraft and launch vehicles. To ensure that this crucial technology was not lost when Shell elected to exit the business, Aerojet, supported by NASA, has developed a dedicated catalyst production facility that will supply catalyst for future spacecraft and launch vehicle requirements. We have undertaken a program to transfer catalyst production from Shell Chemical USA (Houston, TX) to Aerojet's Redmond, WA location. This technology transition was aided by Aerojet's 30 years of catalyst manufacturing experience and NASA diligence and support in sustaining essential technologies. The facility has produced and tested S-405 catalyst to existing Shell 405 specifications and standards. Our presentation will describe the technology transition effort including development of the manufacturing facility, capture of the manufacturing process, test equipment validation, initial batch build and final testing.

  3. Field monitoring and evaluation of a residential gas-engine-driven heat pump: Volume 2, Heating season

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Miller, J.D.

    1995-11-01

    The Federal Government is the largest single energy consumer in the United States; consumption approaches 1.5 quads/year of energy (1 quad = 10{sup 15} Btu) at a cost valued at nearly $10 billion annually. The US Department of Energy (DOE) Federal Energy Management Program (FEMP) supports efforts to reduce energy use and associated expenses in the Federal sector. One such effort, the New Technology Demonstration Program (NTDP), seeks to evaluate new energy-saving US technologies and secure their more timely adoption by the US Government. Pacific Northwest Laboratory (PNL) is one of four DOE national multiprogram laboratories that participate in themore » NTDP by providing technical expertise and equipment to evaluate new, energy-saving technologies being studied and evaluated under that program. This two-volume report describes a field evaluation that PNL conducted for DOE/FEMP and the US Department of Defense (DoD) Strategic Environmental Research and Development Program (SERDP) to examine the performance of a candidate energy-saving technology -- a gas-engine-driven heat pump. The unit was installed at a single residence at Fort Sam Houston, a US Army base in San Antonio, Texas, and the performance was monitored under the NTDP. Participating in this effort under a Cooperative Research and Development Agreement (CRADA) were York International, the heat pump manufacturer; Gas Research Institute (GRI), the technology developer; City Public Service of San Antonio, the local utility; American Gas Cooling Center (AGCC); Fort Sam Houston; and PNL.« less

  4. Complex of technologies and prototype systems for eco-friendly shutdown of the power-generating, process, capacitive, and transport equipment

    NASA Astrophysics Data System (ADS)

    Smorodin, A. I.; Red'kin, V. V.; Frolov, Y. D.; Korobkov, A. A.; Kemaev, O. V.; Kulik, M. V.; Shabalin, O. V.

    2015-07-01

    A set of technologies and prototype systems for eco-friendly shutdown of the power-generating, process, capacitive, and transport equipment is offered. The following technologies are regarded as core technologies for the complex: cryogenic technology nitrogen for displacement of hydrogen from the cooling circuit of turbine generators, cryo blasting of the power units by dioxide granules, preservation of the shutdown power units by dehydrated air, and dismantling and severing of equipment and structural materials of power units. Four prototype systems for eco-friendly shutdown of the power units may be built on the basis of selected technologies: Multimode nitrogen cryogenic system with four subsystems, cryo blasting system with CO2 granules for thermal-mechanical and electrical equipment of power units, and compressionless air-drainage systems for drying and storage of the shutdown power units and cryo-gas system for general severing of the steam-turbine power units. Results of the research and pilot and demonstration tests of the operational units of the considered technological systems allow applying the proposed technologies and systems in the prototype systems for shutdown of the power-generating, process, capacitive, and transport equipment.

  5. Improving eye safety in citrus harvest crews through the acceptance of personal protective equipment, community-based participatory research, social marketing, and community health workers.

    PubMed

    Tovar-Aguilar, J Antonio; Monaghan, Paul F; Bryant, Carol A; Esposito, Andrew; Wade, Mark; Ruiz, Omar; McDermott, Robert J

    2014-01-01

    For the last 10 years, the Partnership for Citrus Workers Health (PCWH) has been an evidence-based intervention program that promotes the adoption of protective eye safety equipment among Spanish-speaking farmworkers of Florida. At the root of this program is the systematic use of community-based preventive marketing (CBPM) and the training of community health workers (CHWs) among citrus harvester using popular education. CBPM is a model that combines the organizational system of community-based participatory research (CBPR) and the strategies of social marketing. This particular program relied on formative research data using a mixed-methods approach and a multilevel stakeholder analysis that allowed for rapid dissemination, effective increase of personal protective equipment (PPE) usage, and a subsequent impact on adoptive workers and companies. Focus groups, face-to-face interviews, surveys, participant observation, Greco-Latin square, and quasi-experimental tests were implemented. A 20-hour popular education training produced CHWs that translated results of the formative research to potential adopters and also provided first aid skills for eye injuries. Reduction of injuries is not limited to the use of safety glasses, but also to the adoption of timely intervention and regular eye hygiene. Limitations include adoption in only large companies, rapid decline of eye safety glasses without consistent intervention, technological limitations of glasses, and thorough cost-benefit analysis.

  6. Assessment of Options for Enhancing Surface Ship Acquisition.

    DTIC Science & Technology

    1996-03-01

    propulsion control, cargo handling, and the ship’s self defense capability. Cost growth was 50 percent even with a reduction from 9 ships to 5. For...technology, high - value weapon and sensor systems Cargo Arrangements Every area of ship densely packed with equipment, cables, pipes, ventilation...acquisition reform has a high potential to improve the outcomes of ship acquisition programs. Progress has been made in the reduction of military

  7. Still in Bloom? As Completion Takes Center Stage, A Look at the Green Movement and Sustainability on Community College Campuses

    ERIC Educational Resources Information Center

    Collett, Stacy

    2014-01-01

    A few years ago you could not attend a higher education conference without a session on green technology, and the sustainability movement. Emerging job training programs in wind and solar were equipping a new generation of energy workers with skills needed to secure high income jobs in clean energy markets. Campuses were doing their part to become…

  8. Defense Systems Modernization and Sustainment Initiative

    DTIC Science & Technology

    2007-09-18

    approach provides the dual benefits of a source of research direction and requirements from military equipment operators, maintainers, and life-cycle...world. RIT is coeducational and the 11h largest private university in the nation. RIT offers 350 programs of study in eight colleges including the...objective of the Asset Health Management research is to assess cost benefit of the deployment of health monitoring technologies to U.S. Marine Corps ground

  9. JPRS report: Science and technology. USSR: Engineering and equipment

    NASA Astrophysics Data System (ADS)

    1991-10-01

    A bibliography is given of U.S.S.R. research in engineering and equipment. Topics covered include aviation, space technology, optics, high energy devices, nuclear energy, and industrial technology, planning, and productivity.

  10. The research of medical equipment on-line detection system based on Android smartphone

    NASA Astrophysics Data System (ADS)

    Jiang, Junjie; Dong, Xinyu; Zhang, Hongjie; Liu, Mengjun

    2017-06-01

    With the unceasing enhancement of medical level, the expanding scale of medical institutions, medical equipment as an important tool for disease diagnosis, treatment and prevention, used in all levels of medical institutions. The quality and accuracy of the Medical equipment play a key role in the doctor's diagnosis and treatment effect, medical metrology as the important technical foundation is to ensure that the equipment, technology, material components are accurate and the application is safe and reliable. Medical equipment have the feature of variety, large quantity, long using cycle, expensive and multi-site, which bring great difficulty in maintenance, equipment management and verification. Therefore, how to get the medical measurement integrate deeply into the advanced internet technology, information technology and the new measuring method, for real-time monitoring of medical equipment, tracking, positioning, and query is particularly important.

  11. PLDAPS: A Hardware Architecture and Software Toolbox for Neurophysiology Requiring Complex Visual Stimuli and Online Behavioral Control.

    PubMed

    Eastman, Kyler M; Huk, Alexander C

    2012-01-01

    Neurophysiological studies in awake, behaving primates (both human and non-human) have focused with increasing scrutiny on the temporal relationship between neural signals and behaviors. Consequently, laboratories are often faced with the problem of developing experimental equipment that can support data recording with high temporal precision and also be flexible enough to accommodate a wide variety of experimental paradigms. To this end, we have developed a MATLAB toolbox that integrates several modern pieces of equipment, but still grants experimenters the flexibility of a high-level programming language. Our toolbox takes advantage of three popular and powerful technologies: the Plexon apparatus for neurophysiological recordings (Plexon, Inc., Dallas, TX, USA), a Datapixx peripheral (Vpixx Technologies, Saint-Bruno, QC, Canada) for control of analog, digital, and video input-output signals, and the Psychtoolbox MATLAB toolbox for stimulus generation (Brainard, 1997; Pelli, 1997; Kleiner et al., 2007). The PLDAPS ("Platypus") system is designed to support the study of the visual systems of awake, behaving primates during multi-electrode neurophysiological recordings, but can be easily applied to other related domains. Despite its wide range of capabilities and support for cutting-edge video displays and neural recording systems, the PLDAPS system is simple enough for someone with basic MATLAB programming skills to design their own experiments.

  12. NASA-OAI HPCCP K-12 Program

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The NASA-OAI High Performance Communication and Computing K- 12 School Partnership program has been completed. Cleveland School of the Arts, Empire Computech Center, Grafton Local Schools and the Bug O Nay Ge Shig School have all received network equipment and connections. Each school is working toward integrating computer and communications technology into their classroom curriculum. Cleveland School of the Arts students are creating computer software. Empire Computech Center is a magnet school for technology education at the elementary school level. Grafton Local schools is located in a rural community and is using communications technology to bring to their students some of the same benefits students from suburban and urban areas receive. The Bug O Nay Ge Shig School is located on an Indian Reservation in Cass Lake, MN. The students at this school are using the computer to help them with geological studies. A grant has been issued to the friends of the Nashville Library. Nashville is a small township in Holmes County, Ohio. A community organization has been formed to turn their library into a state of the art Media Center. Their goal is to have a place where rural students can learn about different career options and how to go about pursuing those careers. Taylor High School in Cincinnati, Ohio was added to the schools involved in the Wind Tunnel Project. A mini grant has been awarded to Taylor High School for computer equipment. The computer equipment is utilized in the school's geometry class to computationally design objects which will be tested for their aerodynamic properties in the Barberton Wind Tunnel. The students who create the models can view the test in the wind tunnel via desk top conferencing. Two teachers received stipends for helping with the Regional Summer Computer Workshop. Both teachers were brought in to teach a session within the workshop. They were selected to teach the session based on their expertise in particular software applications.

  13. Transition Program for Equipment Manufacturers (TPEM)

    EPA Pesticide Factsheets

    In order to provide flexibility for small equipment manufacturers that must comply with new regulations, EPA created the Transition Program for Equipment Manufacturers, better known as “TPEM” or “flexibility program.”

  14. Is it design or is it inquiry? Exploring technology research in a Filipino school setting

    NASA Astrophysics Data System (ADS)

    Yazon, Jessamyn Marie Olivares

    My case study explored Filipino secondary students' and teachers' experiences with technology research, project-based pedagogy. The study was conducted to examine the nature of a Technology Research (TR) Curriculum, and how it mediates non-Western students' learning, and interest in technology-based careers. The context for my study is Philippine Science High School's (PSHS) TR program wherein students outline a proposal, design an experiment or a device, and implement their design to address a real world problem. My data sources included semi-structured interviews of 27 students and 2 teachers; participant observations of classroom and group activities, teacher-student consultations, and Science-Technology Fair presentations; TR curriculum documents; and researcher journal logs. My examination of curriculum documents revealed that since the 1960s, the Philippine government has implemented specialized educational programs, such as the PSHS Science/Technology Streaming and TR programs, to support Filipino youth interested in science and technology courses and careers. Data analyses showed that the TR program provided a rich, practical learning environment where 'doing technology design' blended with 'doing science inquiry'. The TR activities enhanced student understanding of science and technology; helped them integrate and apply knowledge and skills learned from other school subjects; encouraged them to be creative, problem-solvers; and helped develop their lifelong learning skills. Students recognized that TR teachers adopted alternative instructional strategies that prompted students to adopt more active roles in their learning. Research findings revealed that student interest in pursuing technology-related careers was supported by their participation in the streaming and the TR programs. Data also showed that Filipino cultural practices mediated student learning, and career decision-making. My research findings suggest that present notions of scientific inquiry, and technological design need to be re-examined; that integrated science-technology school programs must be implemented to enhance students' academic and vocational knowledge and skills; and that career direction interventions should address personal and socio-cultural factors other than student interest and aptitude. My study provides strong evidence that technology research pedagogy can change teaching-learning approaches in a Filipino classroom. This study showed that academic-vocational, technology-enriched science curriculum could be effectively designed to help equip students to become critical thinkers and leaders in the 21st century.

  15. US Army Research Laboratory power sources R and D programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Christopher, H.A.; Gilman, S.; Hamlen, R.P.

    1993-05-01

    The development and application of new electronic technologies over the recent past has resulted in a major evolution of new electronic battlefield equipment. The need for lighter-weight and more cost effective power sources with higher power/energy density capability is critical to the successful development and deployment of these new, high performance battlefield devices. The current status and thrust of the Army Research Laboratory's (ARL's) battery and fuel cell R and D programs that support these new and emerging applications will be reviewed. Major technical barriers will be identified along with the corresponding proposed approaches to solving these anticipated problems.

  16. Aerial photo shows RLV complex at KSC

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This closeup photo shows the Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. At right is a multi- purpose hangar and to the left is a building for related ground support equipment and administrative/ technical support. The complex is situated at the Shuttle Landing Facility. The RLV complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC.

  17. Construction continues on the RLV complex at the Shuttle Landing Facility

    NASA Technical Reports Server (NTRS)

    1999-01-01

    At the construction site of the Reusable Launch Vehicle (RLV) complex at KSC, workers take measurements for one of the buildings. Located near the Shuttle Landing Facility, the complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000.

  18. Flight performance measurement utilizing a figure of merit (FOM)

    NASA Technical Reports Server (NTRS)

    Mosier, Kathleen L.; Zacharias, Greg L.

    1993-01-01

    One of the goals of the NASA Strategic Behavior/Workload Management Program is to develop standardized procedures for constructing figures of merit (FOMs) that describe minimal criteria for flight task performance, as well as summarize overall performance quality. Such a measure could be utilized for evaluating flight crew performance, for assessing the effectiveness of new equipment or technological innovations, or for measuring performance at a particular airport. In this report, we describe the initial phases in the creation of a FOM to be employed in examining crew performance in NASA-Ames Air Ground Compatibility and Strategic Behavior/Workload Management programs.

  19. Construction continues on the RLV complex at the Shuttle Landing Facility

    NASA Technical Reports Server (NTRS)

    1999-01-01

    At the construction site of the Reusable Launch Vehicle (RLV) complex at KSC, a worker takes a measurement. Located near the Shuttle Landing Facility, the complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000.

  20. Construction continues on the RLV complex at the Shuttle Landing Facility

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Construction is under way for the X-33/X-34 hangar complex near the Shuttle Landing Facility at KSC. The Reusable Launch Vehicle (RLV) complex will include facilities for related ground support equipment and administrative/ technical support. It will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000.

  1. KSC-99pp1257

    NASA Image and Video Library

    1999-10-29

    The first roof panels are placed on the multi-purpose hangar at the site of the $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. The RLV complex, which includes the hangar and a building for related ground support equipment and administrative/technical support, will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  2. KSC-99pp1259

    NASA Image and Video Library

    1999-10-29

    Work continues on construction of the multi-purpose hangar at the site of the $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. In the background can be seen the new construction for the building that will house related ground support equipment and administrative/technical support. The RLV complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  3. KSC-99pp1262

    NASA Image and Video Library

    1999-10-29

    Workers place the first roof panels on the multi-purpose hangar at the site of the $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. The RLV complex, which includes the hangar and a building for related ground support equipment and administrative/technical support, will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  4. KSC-07pd2601

    NASA Image and Video Library

    2007-09-28

    KENNEDY SPACE CENTER, FLA. STS-122 Mission Specialist Hans Schlegel looks closely at the hatch on the Columbus Research Laboratory in the Space Station Processing Facility. Schegel represents the European Space Agency. The crew is at Kennedy to take part in a crew equipment interface test, which helps familiarize them with equipment and payloads for the mission. Among the activities standard to a CEIT are harness training, inspection of the thermal protection system and camera operation for planned extravehicular activities, or EVAs. The Columbus Lab is Europe’s largest contribution to the construction of the International Space Station. It will support scientific and technological research in a microgravity environment. Columbus, a program of ESA, is a multifunctional, pressurized laboratory that will be permanently attached to Node 2 of the space station to carry out experiments in materials science, fluid physics and biosciences, as well as to perform a number of technological applications. STS-122 is targeted for launch in December. Photo credit: NASA/Jim Grossmann

  5. The Laser Institute of Technology for Education and Research at Camden County College: how it has changed and evolved after 20 years

    NASA Astrophysics Data System (ADS)

    Seeber, Fred P.

    2009-06-01

    The Laser Institute of Technology for Education and Research (LITER), nationally and internationally recognized in the field of Photonics, is a state of the art facility built in 1989 on the campus of Camden County College, Blackwood, NJ. This building consists of six high power laser labs, five low power laser labs and four fiber-optic laboratories. It also contains classrooms and research labs and the facility houses over $5,000,000 in equipment. This paper will discuss the evolution of this facility in regards to enrollment in its photonics programs, funding for new equipment purchases and maintaining and updating the facility in laser safety requirements as required by the ANSI Z-136.5 Standard for Educational Institutions. The paper will also discuss how OP-TEC (The National Center for Optics and Photonics Education) has helped to keep this Laser Institute at the cutting edge of photonics education.

  6. Surface hardening of cutting elements agricultural machinery vibro arc plasma

    NASA Astrophysics Data System (ADS)

    Sharifullin, S. N.; Adigamov, N. R.; Adigamov, N. N.; Solovev, R. Y.; Arakcheeva, K. S.

    2016-01-01

    At present, the state technical policy aimed at the modernization of worn equipment, including agriculture, based on the use of high-performance technology called nanotechnology. By upgrading worn-out equipment meant restoring it with the achievement of the above parameters passport. The existing traditional technologies are not suitable for the repair of worn-out equipment modernization. This is especially true of imported equipment. Out here alone - is the use of high-performance technologies. In this paper, we consider the use of vibro arc plasma for surface hardening of cutting elements of agricultural machinery.

  7. Reducing chronic obstructive pulmonary disease readmissions: the role of the durable medical equipment provider.

    PubMed

    Messenger, Robert W

    2012-01-01

    Exacerbation and frequent rehospitalization in chronic obstructive pulmonary disease exacts a heavy toll on the US health care system. To address these issues, new initiatives have been proposed that are largely based on financial penalties to promote patient education and postdischarge care. However, as laudable as these goals are, improving outcomes in the chronic obstructive pulmonary disease population is more confounding than it may first appear. Chronic hypoxia, cognitive dysfunction, poor nutrition, and economic disadvantage are just a few of the challenges that require creative solutions and ongoing support. Case managers need to utilize all the potential products and services that can assist in improving outcomes for these patients. Durable medical equipment providers are often viewed as purveyors of medical equipment that offer little in the form of clinical support. However, in many cases these providers represent an overlooked resource that provides individualized, highly structured patient education and ongoing support programs. The challenge is in identifying those durable medical equipment providers that offer patients contemporary technology, and have both the resources and the commitment to provide patient support that is amenable to the goals of the hospital. This article reviews many of the confounding issues that contribute to the frequent rehospitalization of chronic obstructive pulmonary disease patients. Recommendations to improve patient education and oxygen therapy outcomes are provided along with suggestions to aid in the vetting of durable medical equipment providers. Acute care hospitals, long-term acute care hospitals, extended care facilities, integrated delivery systems. 1. An understanding of the complex variables that play in the management of chronic obstructive pulmonary disease will help the case manager to plan an effective course of care. 2. Case managers need to ensure that patients receive long-term oxygen technology that supports their lifestyle, promotes compliance, and ultimately achieves the desired outcomes. 3. Case managers must advocate for coordinated, ongoing patient education and stress the need for continuing reinforcement. 4. Case managers must ensure that patients under their care be matched with durable medical equipment providers that provide the technology and support that favors positive clinical outcomes.

  8. 78 FR 50374 - Proposed Information Collection; Comment Request; Information and Communication Technology Survey

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-19

    ... expenses (purchases; and operating leases and rental payments) for four types of information and communication technology equipment and software (computers and peripheral equipment; ICT equipment, excluding computers and peripherals; electromedical and electrotherapeutic apparatus; and computer software, including...

  9. Waste-Management Education and Research Consortium (WERC) annual progress report, 1991--1992. Appendixes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-04-07

    This report contains the following appendices: Appendix A - Requirements for Undergraduate Level; Appendix B - Requirements for Graduate Level; Appendix C - Graduate Degree In Environmental Engineering; Appendix D - Non-degree Certificate Program; Appendix E - Curriculum for Associate Degree Program; Appendix F - Curriculum for NCC Program; Appendix G - Information 1991 Teleconference Series; Appendix H - Information on 1992 Teleconference Series; Appendix I - WERC interactive Television Courses; Appendix J - WERC Research Seminar Series; Appendix K - Sites for Hazardous/Radioactive Waste Management Series; Appendix L- Summary of Technology Development of the Second Year; Appendix M -more » List of Major Publications Resulting from WERC; Appendix N - Types of Equipment at WERC Laboratories.« less

  10. Waste-Management Education and Research Consortium (WERC) annual progress report, 1991--1992

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maji, A. K.; Thomson, Bruce M.; Samani, Zohrab A.

    1992-04-07

    This report contains the following appendices: Appendix A - Requirements for Undergraduate Level; Appendix B - Requirements for Graduate Level; Appendix C - Graduate Degree In Environmental Engineering; Appendix D - Non-degree Certificate Program; Appendix E - Curriculum for Associate Degree Program; Appendix F - Curriculum for NCC Program; Appendix G - Information 1991 Teleconference Series; Appendix H - Information on 1992 Teleconference Series; Appendix I - WERC interactive Television Courses; Appendix J - WERC Research Seminar Series; Appendix K - Sites for Hazardous/Radioactive Waste Management Series; Appendix L- Summary of Technology Development of the Second Year; Appendix M -more » List of Major Publications Resulting from WERC; Appendix N - Types of Equipment at WERC Laboratories.« less

  11. The Space Station Prototype Program - The development of a regenerative life support system for extended-duration missions.

    NASA Technical Reports Server (NTRS)

    Willis, N. C., Jr.; Neel, J. M.

    1972-01-01

    Design concepts and test philosophies which may contribute to the development of a low-cost maintainable environmental control/life support system are examined. It is shown that the concept of producing flight prototype equipment during a developmental program can reduce the eventual cost of a flight system by incorporating realistic flight-type design requirements without imposing exacting design features and stringent controls. A flight prototype design is one that can be converted readily into an actual flight design without any conceptual change. Modularity of subsystems provides the system and the program a degree of flexibility relative to the eventual vehicle configuration and technological improvements.

  12. A corridor microcomputer for physics demonstrations

    NASA Astrophysics Data System (ADS)

    Firth, L. D.

    1984-05-01

    Since January 1983 the Physics Department at Paisley College of Technology has been operating a 'computer games station' in a corridor, with unrestricted access. The programs that have so far been run are all interactive graphics programs designed to illustrate important physical concepts and also to have some games or fun content. Brief descriptions of these programs are given below. The microcomputer is a Sinclair XZ81 with 16K RAM and a durable extension keyboard. The total cost of parts, including a black and white television set, time switches, etc, was around Pounds 190. The equipment is installed in an unused laboratory door, with space beside the screen for instructions to be displayed.

  13. NASA's Plans for Developing Life Support and Environmental Monitoring and Control Systems

    NASA Technical Reports Server (NTRS)

    Lawson, B. Michael; Jan, Darrell

    2006-01-01

    Life Support and Monitoring have recently been reworked in response to the Vision for Space Exploration. The Exploration Life Support (ELS) Project has replaced the former Advanced Life Support Element of the Human Systems Research and Technology Office. Major differences between the two efforts include: the separation of thermal systems into a new stand alone thermal project, deferral of all work in the plant biological systems, relocation of food systems to another organization, an addition of a new project called habitation systems, and overall reduction in the number of technology options due to lower funding. The Advanced Environmental Monitoring and Control (AEMC) Element is retaining its name but changing its focus. The work planned in the ELS and AEMC projects is organized around the three major phases of the Exploration Program. The first phase is the Crew Exploration Vehicle (CEV). The ELS and AEMC projects will develop hardware for this short duration orbital and trans-lunar vehicle. The second phase is sortie landings on the moon. Life support hardware for lunar surface access vehicles including upgrades of the CEV equipment and technologies which could not be pursued in the first phase due to limited time and budget will be developed. Monitoring needs will address lunar dust issues, not applicable to orbital needs. The ELS and AEMC equipment is of short duration, but has different environmental considerations. The third phase will be a longer duration lunar outpost. This will consist of a new set of hardware developments better suited for long duration life support and associated monitoring needs on the lunar surface. The presentation will show the planned activities and technologies that are expected to be developed by the ELS and AEMC projects for these program phases.

  14. Technical assessment of Mir-1 life support hardware for the international space station

    NASA Technical Reports Server (NTRS)

    Mitchell, K. L.; Bagdigian, R. M.; Carrasquillo, R. L.; Carter, D. L.; Franks, G. D.; Holder, D. W., Jr.; Hutchens, C. F.; Ogle, K. Y.; Perry, J. L.; Ray, C. D.

    1994-01-01

    NASA has been progressively learning the design and performance of the Russian life support systems utilized in their Mir space station. In 1992, a plan was implemented to assess the benefits of the Mir-1 life support systems to the Freedom program. Three primary tasks focused on: evaluating the operational Mir-1 support technologies and understanding if specific Russian systems could be directly utilized on the American space station and if Russian technology design information could prove useful in improving the current design of the planned American life support equipment; evaluating the ongoing Russian life support technology development activities to determine areas of potential long-term application to the U.S. space station; and utilizing the expertise of their space station life support systems to evaluate the benefits to the current U.S. space station program which included the integration of the Russian Mir-1 designs with the U.S. designs to support a crew of six.

  15. Three-Dimensional Computer Simulation as an Important Competence Based Aspect of a Modern Mining Professional

    NASA Astrophysics Data System (ADS)

    Aksenova, Olesya; Pachkina, Anna

    2017-11-01

    The article deals with the problem of necessity of educational process transformation to meet the requirements of modern miming industry; cooperative developing of new educational programs and implementation of educational process taking into account modern manufacturability. The paper proves the idea of introduction into mining professionals learning process studying of three-dimensional models of surface technological complex, ore reserves and underground digging complex as well as creating these models in different graphic editors and working with the information analysis model obtained on the basis of these three-dimensional models. The technological process of manless coal mining at the premises of the mine Polysaevskaya controlled by the information analysis models built on the basis of three-dimensional models of individual objects and technological process as a whole, and at the same time requiring the staff able to use the programs of three-dimensional positioning in the miners and equipment global frame of reference is covered.

  16. Deep ocean corrosion research in support of Oman India gas pipeline

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Graham, F.W.; McKeehan, D.S.

    1995-12-01

    The increasing interest in deepwater exploration and production has motivated the development of technologies required to accomplish tasks heretofore possible only onshore and in shallow water. The tremendous expense of technology development and the cost of specialized equipment has created concerns that the design life of these facilities may be compromised by corrosion. The requirements to develop and prove design parameters to meet these demands will require an ongoing environmental testing and materials evaluation and development program. This paper describes a two-fold corrosion testing program involving: (1) the installation of two corrosion test devices installed in-situ, and (2) a laboratorymore » test conducted in simulated site-specific seawater. These tests are expected to qualify key parameters necessary to design a cathodic protection system to protect the Oman-to-India pipeline.« less

  17. Fluor Hanford ALARA Center is a D and D Resource

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Waggoner, L.O.

    2008-01-15

    The mission at the Hanford Nuclear Reservation changed when the last reactor plant was shut down in 1989 and work was started to place all the facilities in a safe condition and begin decontamination, deactivation, decommissioning, and demolition (D and D). These facilities consisted of old shutdown reactor plants, spent fuel pools, processing facilities, and 177 underground tanks containing 53 million gallons of highly radioactive and toxic liquids and sludge. New skills were needed by the workforce to accomplish this mission. By 1995, workers were in the process of getting the facilities in a safe condition and it became obviousmore » improvements were needed in their tools, equipment and work practices. The Hanford ALARA Program looked good on paper, but did little to help contractors that were working in the field. The Radiological Control Director decided that the ALARA program needed to be upgraded and a significant improvement could be made if workers had a place they could visit that had samples of the latest technology and could talk to experienced personnel who have had success doing D and D work. Two senior health physics personnel who had many years experience in doing radiological work were chosen to obtain tools and equipment from vendors and find a location centrally located on the Hanford site. Vendors were asked to loan their latest tools and equipment for display. Most vendors responded and the Hanford ALARA Center of Technology opened on October 1, 1996. Today, the ALARA Center includes a classroom for conducting training and a mockup area with gloveboxes. Two large rooms have a containment tent, several glove bags, samples of fixatives/expandable foam, coating displays, protective clothing, heat stress technology, cutting tools, HEPA filtered vacuums, ventilation units, pumps, hydraulic wrenches, communications equipment, shears, nibblers, shrouded tooling, and several examples of innovative tools developed by the Hanford facilities. See Figures I and II. The ALARA Center staff routinely researches and tests new technology, sponsor vendor demonstrations, and redistribute tools, equipment and temporary shielding that may not be needed at one facility to another facility that needs it. The ALARA Center staff learns about new technology in several ways. This includes past radiological work experience, interaction with vendors, lessons learned, networking with other DOE sites, visits to the Hanford Technical Library, attendance at off-site conferences and ALARA Workshops. Personnel that contact the ALARA Center for assistance report positive results when they implement the tools, equipment and work practices recommended by the ALARA Center staff. This has translated to reduced exposure for workers and reduced the risk of contamination spread. For example: using a hydraulic shear on one job saved 16 Rem of exposure that would have been received if workers had used saws-all tools to cut piping in twenty-nine locations. Currently, the ALARA Center staff is emphasizing D and D techniques on size-reducing materials, decontamination techniques, use of remote tools/video equipment, capture ventilation, fixatives, using containments and how to find lessons learned. The ALARA Center staff issues a weekly report that discusses their interaction with the workforce and any new work practices, tools and equipment being used by the Hanford contractors. Distribution of this weekly report is to about 130 personnel on site and 90 personnel off site. This effectively spreads the word about ALARA throughout the DOE Complex. DOE EM-23, in conjunction with the D and D and Environmental Restoration work group of the Energy Facility Contractors Organization (EFCOG) established the Hanford ALARA Center as the D and D Hotline for companies who have questions about how D and D work is accomplished. The ALARA Center has become a resource to the nuclear industry and routinely helps contractors at other DOE Sites, power reactors, DOD sites, and sites in England, Europe and Indonesia. Other ALARA Centers are located at the Savannah River Site and Los Alamos National Lab.« less

  18. 39 CFR 255.2 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... technology” and any equipment or interconnected system or subsystem of equipment that is used in the creation... embedded information technology that is used as an integral part of the product, but the principal function... an impairment. (f) Information technology means any equipment, or interconnected system or subsystem...

  19. 39 CFR 255.2 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... technology” and any equipment or interconnected system or subsystem of equipment that is used in the creation... embedded information technology that is used as an integral part of the product, but the principal function... an impairment. (f) Information technology means any equipment, or interconnected system or subsystem...

  20. 39 CFR 255.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... technology” and any equipment or interconnected system or subsystem of equipment that is used in the creation... embedded information technology that is used as an integral part of the product, but the principal function... an impairment. (f) Information technology means any equipment, or interconnected system or subsystem...

  1. 39 CFR 255.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... technology” and any equipment or interconnected system or subsystem of equipment that is used in the creation... embedded information technology that is used as an integral part of the product, but the principal function... an impairment. (f) Information technology means any equipment, or interconnected system or subsystem...

  2. IRIS/USGS Plans for Upgrading the Global Seismograph Network

    USGS Publications Warehouse

    Peterson, Jon; Hutt, Charles R.

    1989-01-01

    PREFACE This report has been prepared to provide information to organizations that may be asked to participate in a program to upgrade the global seismographic network. In most cases, the organizations that will be offered new instrumentation by the U.S. Geological Survey currently operate stations in the World-Wide Standardized Seismograph Network (WWSSN) or the Global Digital Seismograph Network (GDSN). The deployment of the WWSSN in the 1960's and the subsequent equipping of some WWSSN stations with digital equipment and borehole seismometers during the 1970's has been a remarkably successful program that generated the high- quality data needed to fuel an unprecedented period of progress in earthquake and tectonic research. The success of the WWSSN can be attributed to the importance of the data, to the strong commitment by participating organizations to international scientific cooperation, to the dedication and skill of the station operators, and to the resourcefulness of the staff supporting the network. Benefits have been widespread. The community of scientists world-wide has benefited from unrestricted access to a standardized base of calibrated data, and the participating stations have benefited from the donation of modern observatory instruments that have been useful for local earthquake studies and for the training of scientists and engineers. Now, an exciting opportunity has arisen to deploy a new generation of seismograph systems to replace the outdated equipment at many of the WWSSN and GDSN stations. The U.S. Geological Survey (USGS) is cooperating with the Incorporated Research Institutions for Seismology (IRIS) in a program to upgrade the global seismograph network. The equipment development phase is nearly complete with a prototype of the new broadband seismograph system currently undergoing final testing at the USGS Albuquerque Seismological Laboratory. Deployment of the new equipment is expected to begin in early 1990. As this report will demonstrate, the IRIS broadband seismograph system combines the very latest data acquisition and computer technology to produce seismic data with unprecedented bandwidth and dynamic range. Moreover, the system has been designed so that the high-quality digital data are accessible for local display and analysis. The functional design of the new system, which uses off-the-shelf modules and a standard computer bus, will make it much easier than it has been in the past to modify and upgrade the data acquisition system as improvements in technology become available. With adequate support for the program, the new IRIS seismograph system need never become obsolete. We want you to be aware of our plans and the possibility that you may be asked to participate in this ,program. The schedule for upgrading WWSSN and GDSN stations depends on the level of funding earmarked for the program by our National Science Foundation. We hope to deploy at least ten new GSN data systems each year. If you have any questions concerning this program, please contact the Albuquerque Seismological Laboratory, U.S. Geological Survey, Albuquerque, New Mexico 87115-5000. This report was revised in February 1992 in order to update information concerning the current program and instrumentation. The amp in Figure 1 was revised in June 1993, April 1994, December 1994, and September 1996 to reflect updated siting information. In September 1996 a composite photo of standard and optional components of the IRIS-2 GSN system hardware was added as a separate page between Figures 9 and 10.

  3. The effects of reimbursement mechanisms on medical technology diffusion in the hospital sector in the Italian NHS.

    PubMed

    Finocchiaro Castro, Massimo; Guccio, Calogero; Pignataro, Giacomo; Rizzo, Ilde

    2014-04-01

    The aim of this study was to investigate how the differences across the regional reimbursement mechanisms and in particular the use of the DRGs impact on the level in the high technology equipment diffusion. Based on hospital sector data at a regional level we build up indicators to measure the regional diffusion of high technological medical equipment in the period 1997-2007. These indicators are regressed on regional healthcare characteristics to investigate the relationship between the different reimbursement systems offered by Italian regions and the level of high technological medical equipment. Our results suggest that the per-case payment system is generally associated with a lower level of regional technology endowment per million of inhabitants, especially for the complex and expensive medical equipment. Our findings cast some doubts that an effective regulation of reimbursement mechanisms cannot limit the excessive diffusion of medical equipment that is a relevant driver of the increase in expenditure. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  4. Teaching high-speed photography and photo-instrumentation

    NASA Astrophysics Data System (ADS)

    Davidhazy, Andrew

    2005-03-01

    As the tools available to the high speed photographer have become more powerful the underlying technology has increased in complexity and often is beyond the reach of most practitioners in terms of in-the-field troubleshooting or adaptation and this specialization has also driven many systems beyond the reach of high school, community college and undergraduate, non-research funded, universities. In spite of this and with the belief that fundamental techniques, reasoning and approaches have not changed much over the years, several courses in photo-instrumentation at the Imaging and Photographic Technology program at the Rochester Institute of Technology present to a couple dozen undergraduate students a year the principles associated with a various imaging systems and techniques for visualization and data analysis of high speed or "invisible" phenomena. This paper reviews the objectives and philosophy of these courses in the context of a total imaging technology education. It describes and illustrates current topics included in the program. In brief, calibration and time measurement concepts, instantaneous and repetitive time sampling equipment, various visualization technologies, strip and streak cameras and applications using film and improvised digital recorders, basic velocimetry techniques including sensitometric velocimetry and synchro-ballistic photography plus other related techniques are introduced to undergraduate students.

  5. U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Oil Bypass Filter Technology Evaluation Fifth Quarterly Report October - December 2003

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larry Zirker; James Francfort

    2004-02-01

    This Oil Bypass Filter Technology Evaluation quarterly report (October-December 2003) details the ongoing fleet evaluation of an oil bypass filter technology by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass filter systems from the puraDYN Corporation. The bypass filters are reported to have engine oil filtering capability of <1 micron and a built-in additive package to facilitate extended oil-drain intervals. To date, the eight buses have accumulated 324,091 test miles. Thismore » represents an avoidance of 27 oil changes, which equate to 952 quarts (238 gallons) of new oil not conserved and therefore, 952 quarts of waste oil not generated. To validate the extended oil-drain intervals, an oil-analysis regime is used to evaluate the fitness of the oil for continued service by monitoring the presence of necessary additives, undesirable contaminants, and engine-wear metals. The test fleet has been expanded to include six Chevrolet Tahoe sport utility vehicles with gasoline engines.« less

  6. ESA's satellite communications programme

    NASA Astrophysics Data System (ADS)

    Bartholome, P.

    1985-02-01

    The developmental history, current status, and future plans of the ESA satellite-communications programs are discussed in a general survey and illustrated with network diagrams and maps. Consideration is given to the parallel development of national and European direct-broadcast systems and telecommunications networks, the position of the European space and electronics industries in the growing world market, the impact of technological improvements (both in satellite systems and in ground-based networks), and the technological and commercial advantages of integrated space-terrestrial networks. The needs for a European definition of the precise national and international roles of satellite communications, for maximum speed in implementing such decisions (before the technology becomes obsolete), and for increased cooperation and standardization to assure European equipment manufacturers a reasonable share of the market are stressed.

  7. [Using telemedicine to improve chronic disease monitoring].

    PubMed

    Lamothe, Lise; Paquette, Marie-Andrée; Fortin, Jean-Paul; Labbé, Françoise; Messikhs, Djamel; Duplantie, Julie

    2013-01-01

    The purpose of this study was to understand how home telecare technologies can be used to improve services for people with chronic diseases. Canadian elders with at least one of the targeted chronic diseases (COPD, heart failure, hypertension, diabetes) were asked to use telehomecare equipment. The data needed to assess the implementation process and to monitor outcomes were collected through participatory observation, documentary analysis and interviews. The study found that the technology has a number of benefits for patients, particularly in terms of access to health services. By enabling patients to access more information about their health, the use of the technology, combined with an educational program, contributes to increasing their capacity for self-management. The results also indicate that the telehomecare equipment had a positive impact on clinical decision-making. By facilitating health professionals' access to information and expertise, it was found to promote interprofessional practice. The study found that telehomecare technology has an organizational impact on practice and requires organizational adaptation, the form of which will depend on local organizational and clinical settings. The results suggest that telehomecare technology helps to create conditions that need to be met by health care organizations in order to improve service delivery to people with chronic diseases, particularly with regard to interprofessional collaboration, health professionals' access to information and expertise and active patient participation. However, the successful implementation of the technology requires a detailed analysis of the settings in which it is used.

  8. High-tech rural clinics and hospitals in Japan: a comparison to the Japanese average.

    PubMed

    Matsumoto, Masatoshi; Okayama, Masanobu; Inoue, Kazuo; Kajii, Eiji

    2004-10-01

    Japanese medical facilities are noted for being heavily equipped with high-tech equipment compared to other industrialised countries. Rural facilities are anecdotally said to be better equipped than facilities in other areas due to egalitarian health resource diffusion policies by public sectors whose goal is to secure fair access to modern medical technologies among the entire population. To show the technology status of rural practice and compare it to the national level. Nationwide postal survey. Questionnaires were sent to the directors of 1362 public hospitals and clinics (of the 1723 municipalities defined as 'rural' by four national laws). Information was collected about the technologies they possessed. The data were compared with figures from a national census of all hospitals and clinics. A total of 766 facilities responded (an effective response rate of 56%). Rural facilities showed higher possession rates in most comparable technologies than the national level. It is noted that almost all rural hospitals had gastroscopes and colonoscopes and their possession rates of bronchoscopes and dialysis equipment were twice as high as the national level. The discrepancy in possession rates between rural and national was even more remarkable in clinics than in hospitals. Rural clinics owned twice as many abdominal ultrasonographs, and three times as many gastroscopes, colonoscopes, defibrillators and computed tomography scanners as the national level. Rural facilities are equipped with more technology than urban ones. Government-led, tax based, technology diffusion in the entire country seems to have attained its goal. What is already known on this subject: As a general tendency in both developing and developed countries, rural medical facilities are technologically less equipped than their urban counterparts. What does this paper add?: In Japan, rural medical facilities are technologically better equipped than urban facilities.

  9. Space Technology for the Iron Foundry

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Electric Power Research Institute (EPRI) initiated development of a plasma melter intended to solve a major problem in the U.S. foundry industry. EPRI is a non-profit organization that manages research and development for some 600 electric utility member companies. For the plasma melter program, EPRI enlisted as co-sponsors Westinghouse Electric's Environmental Systems and Services Division, General Motors Corporation, and Modern Equipment Company, supplier of equipment and services to the foundry industry. General Motor's plasma melter, first in the U.S., is an advanced technology system designed to improve the efficiency of coke-burning cupolas that melt iron to produce automotive castings. The key elements are six Westinghouse plasma torches. Electrically-powered plasma torch creates an ionized gas that superheats air entering the cupola to 10,000 degrees Fahrenheit. That great heat, three times higher than that attainable by oil or natural gas systems, is the key to making iron cheaper, cleaner, and faster. System offers an environmental bonus in reduced cupola emissions. Plasma torches increase GM's electric bill at Defiance, but that cost is more than compensated by the savings in charge material. The EPRI-sponsored Center for Materials Production (CMP) is evaluating the potential of plasma cupola technology.

  10. An interventional model to develop health professionals in West Africa.

    PubMed

    Sanou, Anselme Simeon; Awoyale, Florence Adeola; Diallo, Abdoulaye

    2014-01-01

    The health sector is characterized by a human resource base lacking in numbers, specialized skills, and management skills. West African Health Organization (WAHO) recognizes the need within the West Africa sub-region for bilingual professionals who are skilled in public health, management, leadership, and information technology to build human capacity in public health and developed the Young Professionals Internship Program (YPIP). Our study explores the evolution of the programme. YPIP program has successfully carried out its original aims and objectives to equip young professionals with basic principles of public health, management, and leadership, acquire competence in a second official language (French, English, and Portuguese), information and communication technology. Contributing factors towards this successful evaluation included positive ratings and commentary from previous interns about the relevance, usefulness, and quality of the programme, encouraging feedback from WAHO management, trainers, administrators, and intern employers on the impact of the YPIP program on young professionals, supporting evidence that demonstrates increased knowledge in professional skills and language competency.

  11. An interventional model to develop health professionals in West Africa

    PubMed Central

    Sanou, Anselme Simeon; Awoyale, Florence Adeola; Diallo, Abdoulaye

    2014-01-01

    The health sector is characterized by a human resource base lacking in numbers, specialized skills, and management skills. West African Health Organization (WAHO) recognizes the need within the West Africa sub-region for bilingual professionals who are skilled in public health, management, leadership, and information technology to build human capacity in public health and developed the Young Professionals Internship Program (YPIP). Our study explores the evolution of the programme. YPIP program has successfully carried out its original aims and objectives to equip young professionals with basic principles of public health, management, and leadership, acquire competence in a second official language (French, English, and Portuguese), information and communication technology. Contributing factors towards this successful evaluation included positive ratings and commentary from previous interns about the relevance, usefulness, and quality of the programme, encouraging feedback from WAHO management, trainers, administrators, and intern employers on the impact of the YPIP program on young professionals, supporting evidence that demonstrates increased knowledge in professional skills and language competency. PMID:25419290

  12. 77 FR 48498 - Executive-Led Trade Mission to South Africa and Zambia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-14

    ... technologies and equipment; transportation equipment and infrastructure; and mining equipment and technology...'', add the following text: Water Sector [cir] Water supply [cir] Sanitation [cir] Drainage systems [cir... gemstones, and produces 20 percent of the world's emeralds.'', add the following text: Water The Government...

  13. Community Observatories: Fostering Ideas that STEM From Ocean Sense: Local Observations. Global Connections.

    NASA Astrophysics Data System (ADS)

    Pelz, M. S.; Ewing, N.; Hoeberechts, M.; Riddell, D. J.; McLean, M. A.; Brown, J. C. K.

    2015-12-01

    Ocean Networks Canada (ONC) uses education and communication to inspire, engage and educate via innovative "meet them where they are, and take them where they need to go" programs. ONC data are accessible via the internet allowing for the promotion of programs wherever the learners are located. We use technologies such as web portals, mobile apps and citizen science to share ocean science data with many different audiences. Here we focus specifically on one of ONC's most innovative programs: community observatories and the accompanying Ocean Sense program. The approach is based on equipping communities with the same technology enabled on ONC's large cabled observatories. ONC operates the world-leading NEPTUNE and VENUS cabled ocean observatories and they collect data on physical, chemical, biological, and geological aspects of the ocean over long time periods, supporting research on complex Earth processes in ways not previously possible. Community observatories allow for similar monitoring on a smaller scale, and support STEM efforts via a teacher-led program: Ocean Sense. This program, based on local observations and global connections improves data-rich teaching and learning via visualization tools, interactive plotting interfaces and lesson plans for teachers that focus on student inquiry and exploration. For example, students use all aspects of STEM by accessing, selecting, and interpreting data in multiple dimensions, from their local community observatories to the larger VENUS and NEPTUNE networks. The students make local observations and global connections in all STEM areas. The first year of the program with teachers and students who use this innovative technology is described. Future community observatories and their technological applications in education, communication and STEM efforts are also described.

  14. Market for advanced humanitarian mine detectors

    NASA Astrophysics Data System (ADS)

    Newnham, Peter; Daniels, David J.

    2001-10-01

    Uncleared landmines and unexploded ordnance remain a major humanitarian and economic threat in over 60 countries. It is estimated that world wide over US 60 million was spent on mien clearance in 1999. Most of this funding is provided by government aid, often channeled via the UN or European Community. The minefield threat is very varied, with many different types of mien, UXO, terrain and climate type. To cope with this variety a range of demining techniques are used: mechanical techniques such as flails are used for vegetation clearance, however the majority of demining work is still carried out by manual deminers using metal detectors and prodders. Over the last 5 years there has been considerable interest within the scientific and engineering communities in the application of advanced technologies to improve the safety and efficiency of this work. Nevertheless few new products have been introduced into, and accepted by, the demining community. Despite the high political profile of the landmine problem very little e hard dat is available on the real characteristics of the demining equipment market. As part of a European Union supported program to evacuate a multi-sensor handheld mien detector concept, Thales and ERA Technology Ltd have carried out an in-depth assessment of this market. This paper describes the cost- benefits that could accrue to the demining community associated with use of advanced equipment under appropriate conditions and the equipment requirements that result. The dynamics of the demining equipment market and the barriers to entry are discussed.

  15. Space biology initiative program definition review. Trade study 1: Automation costs versus crew utilization

    NASA Technical Reports Server (NTRS)

    Jackson, L. Neal; Crenshaw, John, Sr.; Hambright, R. N.; Nedungadi, A.; Mcfayden, G. M.; Tsuchida, M. S.

    1989-01-01

    A significant emphasis upon automation within the Space Biology Initiative hardware appears justified in order to conserve crew labor and crew training effort. Two generic forms of automation were identified: automation of data and information handling and decision making, and the automation of material handling, transfer, and processing. The use of automatic data acquisition, expert systems, robots, and machine vision will increase the volume of experiments and quality of results. The automation described may also influence efforts to miniaturize and modularize the large array of SBI hardware identified to date. The cost and benefit model developed appears to be a useful guideline for SBI equipment specifiers and designers. Additional refinements would enhance the validity of the model. Two NASA automation pilot programs, 'The Principal Investigator in a Box' and 'Rack Mounted Robots' were investigated and found to be quite appropriate for adaptation to the SBI program. There are other in-house NASA efforts that provide technology that may be appropriate for the SBI program. Important data is believed to exist in advanced medical labs throughout the U.S., Japan, and Europe. The information and data processing in medical analysis equipment is highly automated and future trends reveal continued progress in this area. However, automation of material handling and processing has progressed in a limited manner because the medical labs are not affected by the power and space constraints that Space Station medical equipment is faced with. Therefore, NASA's major emphasis in automation will require a lead effort in the automation of material handling to achieve optimal crew utilization.

  16. 45 CFR 74.34 - Equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... equipment with a current per unit fair market value of $5000 or more, the recipient may retain the equipment... the original project or program to the current fair market value of the equipment. If the recipient... project or program to the current fair market value of the equipment, plus any reasonable shipping or...

  17. Prediction accident triangle in maintenance of underground mine facilities using Poisson distribution analysis

    NASA Astrophysics Data System (ADS)

    Khuluqi, M. H.; Prapdito, R. R.; Sambodo, F. P.

    2018-04-01

    In Indonesia, mining is categorized as a hazardous industry. In recent years, a dramatic increase of mining equipment and technological complexities had resulted in higher maintenance expectations that accompanied by the changes in the working conditions, especially on safety. Ensuring safety during the process of conducting maintenance works in underground mine is important as an integral part of accident prevention programs. Accident triangle has provided a support to safety practitioner to draw a road map in preventing accidents. Poisson distribution is appropriate for the analysis of accidents at a specific site in a given time period. Based on the analysis of accident statistics in the underground mine maintenance of PT. Freeport Indonesia from 2011 through 2016, it is found that 12 minor accidents for 1 major accident and 66 equipment damages for 1 major accident as a new value of accident triangle. The result can be used for the future need for improving the accident prevention programs.

  18. Artificial Intelligence Tools for Scaling Up of High Shear Wet Granulation Process.

    PubMed

    Landin, Mariana

    2017-01-01

    The results presented in this article demonstrate the potential of artificial intelligence tools for predicting the endpoint of the granulation process in high-speed mixer granulators of different scales from 25L to 600L. The combination of neurofuzzy logic and gene expression programing technologies allowed the modeling of the impeller power as a function of operation conditions and wet granule properties, establishing the critical variables that affect the response and obtaining a unique experimental polynomial equation (transparent model) of high predictability (R 2 > 86.78%) for all size equipment. Gene expression programing allowed the modeling of the granulation process for granulators of similar and dissimilar geometries and can be improved by implementing additional characteristics of the process, as composition variables or operation parameters (e.g., batch size, chopper speed). The principles and the methodology proposed here can be applied to understand and control manufacturing process, using any other granulation equipment, including continuous granulation processes. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  19. Greenbelt Homes Pilot Program: Summary of Building Envelope Retrofits, Planned HVAC Equipment Upgrades, and Energy Savings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wiehagen, J.; Del Bianco, M.; Mallay, D.

    2015-05-01

    In the fall of 2010, a multiyear pilot energy efficiency retrofit project was undertaken by Greenbelt Homes, Inc, (GHI) a 1,566 home cooperative of circa 1930 and 1940 homes in Greenbelt, Maryland. GHI established this pilot project to serve as a basis for decision making for the rollout of a decade-long community-wide upgrade program that will incorporate energy efficiency improvements to the building envelope and mechanical equipment. It presents a unique opportunity to evaluate and prioritize the wide-range of benefits of high-performance retrofits based on member experience with and acceptance of the retrofit measures implemented during the pilot project. Addressingmore » the complex interactions between benefits, trade-offs, construction methods, project management implications, realistic upfront costs, financing, and other considerations, serves as a case study for energy retrofit projects to include high-performance technologies based on the long-term value to the homeowner. The pilot project focused on identifying the added costs and energy savings benefits of improvements.« less

  20. Using Facility Condition Assessments to Identify Actions Related to Infrastructure

    NASA Technical Reports Server (NTRS)

    Rubert, Kennedy F.

    2010-01-01

    To support cost effective, quality research it is essential that laboratory and testing facilities are maintained in a continuous and reliable state of availability at all times. NASA Langley Research Center (LaRC) and its maintenance contractor, Jacobs Technology, Inc. Research Operations, Maintenance, and Engineering (ROME) group, are in the process of implementing a combined Facility Condition Assessment (FCA) and Reliability Centered Maintenance (RCM) program to improve asset management and overall reliability of testing equipment in facilities such as wind tunnels. Specific areas are being identified for improvement, the deferred maintenance cost is being estimated, and priority is being assigned against facilities where conditions have been allowed to deteriorate. This assessment serves to assist in determining where to commit available funds on the Center. RCM methodologies are being reviewed and enhanced to assure that appropriate preventive, predictive, and facilities/equipment acceptance techniques are incorporated to prolong lifecycle availability and assure reliability at minimum cost. The results from the program have been favorable, better enabling LaRC to manage assets prudently.

  1. Automated rendezvous and capture development infrastructure

    NASA Technical Reports Server (NTRS)

    Bryan, Thomas C.; Roe, Fred; Coker, Cynthia

    1992-01-01

    The facilities at Marshall Space Flight Center and JSC to be utilized to develop and test an autonomous rendezvous and capture (ARC) system are described. This includes equipment and personnel facility capabilities to devise, develop, qualify, and integrate ARC elements and subsystems into flight programs. Attention is given to the use of a LEO test facility, the current concept and unique system elements of the ARC, and the options available to develop ARC technology.

  2. Modular avionics packaging standardization

    NASA Astrophysics Data System (ADS)

    Austin, M.; McNichols, J. K.

    The Modular Avionics Packaging (MAP) Program for packaging future military avionics systems with the objective of improving reliability, maintainability, and supportability, and reducing equipment life cycle costs is addressed. The basic MAP packaging concepts called the Standard Avionics Module, the Standard Enclosure, and the Integrated Rack are summarized, and the benefits of modular avionics packaging, including low risk design, technology independence with common functions, improved maintainability and life cycle costs are discussed. Progress made in MAP is briefly reviewed.

  3. Standardized UXO Technology Demonstration Site, Scoring Record No. 943

    DTIC Science & Technology

    2014-08-01

    COLLERAN ROAD ABERDEEN PROVING GROUND, MARYLAND 21005-5059 Printed on Recycled Paper TEDT-AT-SL-M MEMORANDUM FOR Program Manager – SERDP...equipment. Small munitions grid Contains 300 grid cells . The center of each grid cell contains either munitions, clutter, or nothing with a portion...weather was warm and the field dry throughout the survey period for Battelle. 12 3.3.3 Soil Moisture Three soil probes were placed at various

  4. Environmental monitoring for the DOE coolside and LIMB demonstration extension projects

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    White, T.; Contos, L.; Adams, L.

    1992-02-01

    The purpose of this document is to present environmental monitoring data collected during the US DOE Limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. The objective of the LIMB program is to demonstrate the sulfur dioxide (SO{sub 2}) and nitrogen oxide (NO{sub x}) emission reduction capabilities of the LIMB system. The LIMB system is a retrofit technology to be used for existing coal-fired boilers equipped with electrostatic precipitators. (VC)

  5. QTCM Software Documentation. Volume 1. Programmers’s Manual

    DTIC Science & Technology

    1990-11-01

    technologies are implemented. Since the PSNs are comprised of private companies, the OMNCS has little direct control over how they operate and the... control equipment at each node to prevent any congestion at the switches. Therefore, all call blocking is modeled to occur at the trunks rather than at the...main program is linked with separately compiled subroutines that can be grouped intoI seven distinct functional areas as follows: Control code File

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bryngelson, R.H.

    Describes installation of 3 satellite subsea trees in 500 ft of water from a semisubmersible drilling rig. These wet, diver-assist trees are part of Phillips Petroleum's early development and production program (EDPP) for the Espoir field offshore Ivory Coast, with plans calling for 5 satellite wells with downhole completion equipment and subsea production trees. Diagram shows how a converted jackup, Dan Duke, supports equipment to handle production from subsea wells. Table gives time breakdown of subsea tree installation. Before mobilizing the subsea trees, control system, and tubulars to the rig, a study of deck layout, payloads, and traffic patterns wasmore » performed. Concludes that, based on experience in this project and the cost differences between purchase and installation costs, final success is 90% dependent on informed and trained field personnel after engineering, design, and manufacturing; attention to installation procedures and training of field and operational personnel are as critical or more critical than design changes to equipment; and selection of a supplier for high technology equipment, based on a low bid alone, may not translate into lower installation costs.« less

  7. The role of gas heat pumps in electric DSM

    NASA Astrophysics Data System (ADS)

    Fulmer, M.; Hughes, P. J.

    1993-05-01

    Natural gas-fired heat pumps (GHP's), an emerging technology, may offer environmental economic, and energy benefits relative to standard and advanced space conditioning equipment now on the market. This paper describes an analysis of GHP's for residential space heating, and cooling relative to major competing technologies under an Integrated Resource (IRP) framework. Our study models a hypothetical GHP rebate program using conditions typical of the Great Lakes region. The analysis is performed for a base scenario with sensitivity cases. In the base scenario, the GHP program is cost-effective according to the societal test, total resource cost test (TRC), and the participant test, but is not cost-effective according to the non-participant test. The sensitivity analyses indicate that the results for the TRC test are most sensitive to the season in which electric demand peaks and the technology against which the GHP's are competing, and are less sensitive to changes in the marginal administrative costs. The modeled GHP program would save 900 million kWh over the life of the program and reduce peak load by about 100 MW in winter and about 135 MW in summer. We estimate all of the GHP's in service (both GHP's of program participants and nonparticipants) in the case study region would save 1,900 million kWh and reduce summer peak load by over 350 MW.

  8. Education and equipment for people who smoke crack cocaine in Canada: progress and limits.

    PubMed

    Strike, Carol; Watson, Tara Marie

    2017-05-12

    People who smoke crack cocaine experience a wide variety of health-related issues. However, public health programming designed for this population is limited, particularly in comparison with programming for people who inject drugs. Canadian best practice recommendations encourage needle and syringe programs (NSPs) to provide education about safer crack cocaine smoking practices, distribute safer smoking equipment, and provide options for safer disposal of used equipment. We conducted an online survey of NSP managers across Canada to estimate the proportions of NSPs that provide education and distribute safer smoking equipment to people who smoke crack cocaine. We also assessed change in pipe distribution practices between 2008 and 2015 in the province of Ontario. Analysis of data from 80 programs showed that the majority (0.76) provided education to clients on reducing risks associated with sharing crack cocaine smoking equipment and about when to replace smoking equipment (0.78). The majority (0.64) also distributed safer crack cocaine smoking equipment and over half of these programs (0.55) had done so for less than 5 years. Among programs that distributed pipes, 0.92 distributed the recommended heat-resistant Pyrex and/or borosilicate glass pipes. Only 0.50 of our full sample reported that their program provides clients with containers for safer disposal of used smoking equipment. The most common reasons for not distributing safer smoking equipment were not enough funding (0.32) and lack of client demand (0.25). Ontario-specific sub-analyses showed a significant increase in the proportion of programs distributing pipes in Ontario from 0.15 (2008) to 0.71 (2015). Our findings point to important efforts by Canadian NSPs to reduce harm among people who smoke crack cocaine through provision of education and equipment, but there are still limits that could be addressed. Our study can provide guidance for future cross-jurisdiction studies to describe relationships involving harm reduction programs and provision of safer crack cocaine smoking education and equipment.

  9. Recovery Act: Training Program Development for Commercial Building Equipment Technicians

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Leah Glameyer

    The overall goal of this project has been to develop curricula, certification requirements, and accreditation standards for training on energy efficient practices and technologies for commercial building technicians. These training products will advance industry expertise towards net-zero energy commercial building goals and will result in a substantial reduction in energy use. The ultimate objective is to develop a workforce that can bring existing commercial buildings up to their energy performance potential and ensure that new commercial buildings do not fall below their expected optimal level of performance. Commercial building equipment technicians participating in this training program will learn how tomore » best operate commercial buildings to ensure they reach their expected energy performance level. The training is a combination of classroom, online and on-site lessons. The Texas Engineering Extension Service (TEEX) developed curricula using subject matter and adult learning experts to ensure the training meets certification requirements and accreditation standards for training these technicians. The training targets a specific climate zone to meets the needs, specialized expertise, and perspectives of the commercial building equipment technicians in that zone. The combination of efficient operations and advanced design will improve the internal built environment of a commercial building by increasing comfort and safety, while reducing energy use and environmental impact. Properly trained technicians will ensure equipment operates at design specifications. A second impact is a more highly trained workforce that is better equipped to obtain employment. Organizations that contributed to the development of the training program include TEEX and the Texas Engineering Experiment Station (TEES) (both members of The Texas A&M University System). TEES is also a member of the Building Commissioning Association. This report includes a description of the project accomplishments, including the course development phases, tasks associated with each phase, and detailed list of the course materials developed. A summary of each year's activities is also included.« less

  10. Life sciences payload definition and integration study. Volume 4: Appendix, costs, and data management requirements of the dedicated 30-day laboratory. [carry-on laboratory for Spacelab

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The results of the updated 30-day life sciences dedicated laboratory scheduling and costing activities are documented, and the 'low cost' methodology used to establish individual equipment item costs is explained in terms of its allowances for equipment that is commerical off-the-shelf, modified commercial, and laboratory prototype; a method which significantly lowers program costs. The costs generated include estimates for non-recurring development, recurring production, and recurring operations costs. A cost for a biomedical emphasis laboratory and a Delta cost to provide a bioscience and technology laboratory were also generated. All cost reported are commensurate with the design and schedule definitions available.

  11. [Factors affecting the recovery in the intensive care unit].

    PubMed

    Turkov, P N; Nikitin, V V; Antsupova, M A; Podkopaev, V N; Panfilova, R P; Ivanova, I N; Nesterova, L I

    2013-01-01

    Urgency of the problem is defined by economical, regulatory and legislative acts, regional social and moral factors. There is critical situation in Russian Pediatric Healthcare system. This situation is due to inadequate funding, high medical technologies inaccessibility for some Russian children, their adverse health state. The article presents a retrospective analysis of intensive therapy and resuscitation outcomes with technical equipment and work environment assessment in the intensive care unit of Tushinskaya city pediatric clinic for the period from 2007 to 2011. Anaesthetic and emergency care quality and safety depend on several factors: permanent equipment improvement, comprehensive analysis of every fatal case and full implementation of "Anti-epidemic (prophylactic) actions plan" and "Program of monitoring compliance with the sanitary norms".

  12. Research on the use of data fusion technology to evaluate the state of electromechanical equipment

    NASA Astrophysics Data System (ADS)

    Lin, Lin

    2018-04-01

    Aiming at the problems of different testing information modes and the coexistence of quantitative and qualitative information in the state evaluation of electromechanical equipment, the paper proposes the use of data fusion technology to evaluate the state of electromechanical equipment. This paper introduces the state evaluation process of mechanical and electrical equipment in detail, uses the D-S evidence theory to fuse the decision-making layers of mechanical and electrical equipment state evaluation and carries out simulation tests. The simulation results show that it is feasible and effective to apply the data fusion technology to the state evaluation of the mechatronic equipment. After the multiple decision-making information provided by different evaluation methods are fused repeatedly and the useful information is extracted repeatedly, the fuzziness of judgment can be reduced and the state evaluation Credibility.

  13. Recent advances in lightweight, filament-wound composite pressure vessel technology

    NASA Technical Reports Server (NTRS)

    Lark, R. F.

    1977-01-01

    A review of recent advances is presented for lightweight, high-performance composite pressure vessel technology that covers the areas of design concepts, fabrication procedures, applications, and performance of vessels subjected to single-cycle burst and cyclic fatigue loading. Filament-wound fiber/epoxy composite vessels were made from S-glass, graphite, and Kevlar 49 fibers and were equipped with both structural and nonstructural liners. Pressure vessel structural efficiencies were attained which represented weight savings, using different liners, of 40 to 60 percent over all-titanium pressure vessels. Significant findings in each area are summarized including data from current NASA-Lewis Research Center contractual and in-house programs.

  14. 76 FR 57515 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-15

    ...The Energy Policy and Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and commercial and industrial equipment, including refrigerators, refrigerator-freezers, and freezers. EPCA also requires the U.S. Department of Energy (DOE) to determine if more stringent, amended standards for these products are technologically feasible and economically justified, and would save a significant amount of energy. In this final rule, DOE is adopting more stringent energy conservation standards for refrigerators, refrigerator-freezers, and freezers. It has determined that the amended energy conservation standards for these products would result in the significant conservation of energy and are technologically feasible and economically justified.

  15. Protection of data carriers using secure optical codes

    NASA Astrophysics Data System (ADS)

    Peters, John A.; Schilling, Andreas; Staub, René; Tompkin, Wayne R.

    2006-02-01

    Smartcard technologies, combined with biometric-enabled access control systems, are required for many high-security government ID card programs. However, recent field trials with some of the most secure biometric systems have indicated that smartcards are still vulnerable to well equipped and highly motivated counterfeiters. In this paper, we present the Kinegram Secure Memory Technology which not only provides a first-level visual verification procedure, but also reinforces the existing chip-based security measures. This security concept involves the use of securely-coded data (stored in an optically variable device) which communicates with the encoded hashed information stored in the chip memory via a smartcard reader device.

  16. Solid State Laser

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The Titan-CW Ti:sapphire (titanium-doped sapphire) tunable laser is an innovation in solid-state laser technology jointly developed by the Research and Solid State Laser Divisions of Schwartz Electro-optics, Inc. (SEO). SEO is producing the laser for the commercial market, an outgrowth of a program sponsored by Langley Research Center to develop Ti:sapphire technology for space use. SEO's Titan-CW series of Ti:sapphire tunable lasers have applicability in analytical equipment designed for qualitative analysis of carbohydrates and proteins, structural analysis of water, starch/sugar analyses, and measurements of salt in meat. Further applications are expected in semiconductor manufacture, in medicine for diagnosis and therapy, and in biochemistry.

  17. A landmark recognition and tracking experiment for flight on the Shuttle/Advanced Technology Laboratory (ATL)

    NASA Technical Reports Server (NTRS)

    Welch, J. D.

    1975-01-01

    The preliminary design of an experiment for landmark recognition and tracking from the Shuttle/Advanced Technology Laboratory is described. It makes use of parallel coherent optical processing to perform correlation tests between landmarks observed passively with a telescope and previously made holographic matched filters. The experimental equipment including the optics, the low power laser, the random access file of matched filters and the electro-optical readout device are described. A real time optically excited liquid crystal device is recommended for performing the input non-coherent optical to coherent optical interface function. A development program leading to a flight experiment in 1981 is outlined.

  18. Performance analysis of LDPC codes on OOK terahertz wireless channels

    NASA Astrophysics Data System (ADS)

    Chun, Liu; Chang, Wang; Jun-Cheng, Cao

    2016-02-01

    Atmospheric absorption, scattering, and scintillation are the major causes to deteriorate the transmission quality of terahertz (THz) wireless communications. An error control coding scheme based on low density parity check (LDPC) codes with soft decision decoding algorithm is proposed to improve the bit-error-rate (BER) performance of an on-off keying (OOK) modulated THz signal through atmospheric channel. The THz wave propagation characteristics and channel model in atmosphere is set up. Numerical simulations validate the great performance of LDPC codes against the atmospheric fading and demonstrate the huge potential in future ultra-high speed beyond Gbps THz communications. Project supported by the National Key Basic Research Program of China (Grant No. 2014CB339803), the National High Technology Research and Development Program of China (Grant No. 2011AA010205), the National Natural Science Foundation of China (Grant Nos. 61131006, 61321492, and 61204135), the Major National Development Project of Scientific Instrument and Equipment (Grant No. 2011YQ150021), the National Science and Technology Major Project (Grant No. 2011ZX02707), the International Collaboration and Innovation Program on High Mobility Materials Engineering of the Chinese Academy of Sciences, and the Shanghai Municipal Commission of Science and Technology (Grant No. 14530711300).

  19. Advanced Gasoline Turbocharged Direction Injection (GTDI) Engine Development

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wagner, Terrance

    This program was undertaken in response to US Department of Energy Solicitation DE-FOA-0000079, resulting in a cooperative agreement with Ford and MTU to demonstrate improvement of fuel efficiency in a vehicle equipped with an advanced GTDI engine. Ford Motor Company has invested significantly in GTDI engine technology as a cost effective, high volume, fuel economy solution, marketed globally as EcoBoost technology. Ford envisions additional fuel economy improvement in the medium and long term by further advancing EcoBoost technology. The approach for the project was to engineer a comprehensive suite of gasoline engine systems technologies to achieve the project objectives, andmore » to progressively demonstrate the objectives via concept analysis / computer modeling, single-cylinder and multi-cylinder engine testing on engine dynamometer, and vehicle level testing on chassis rolls.« less

  20. Space missions for automation and robotics technologies (SMART) program

    NASA Technical Reports Server (NTRS)

    Ciffone, D. L.; Lum, H., Jr.

    1985-01-01

    The motivations, features and expected benefits and applications of the NASA SMART program are summarized. SMART is intended to push the state of the art in automation and robotics, a goal that Public Law 98-371 mandated be an inherent part of the Space Station program. The effort would first require tests of sensors, manipulators, computers and other subsystems as seeds for the evolution of flight-qualified subsystems. Consideration is currently being given to robotics systems as add-ons to the RMS, MMU and OMV and a self-contained automation and robotics module which would be tended by astronaut visits. Probable experimentation and development paths that would be pursued with the equipment are discussed, along with the management structure and procedures for the program. The first hardware flight is projected for 1989.

  1. Charge-Control Unit for Testing Lithium-Ion Cells

    NASA Technical Reports Server (NTRS)

    Reid, Concha M.; Mazo, Michelle A.; Button, Robert M.

    2008-01-01

    A charge-control unit was developed as part of a program to validate Li-ion cells packaged together in batteries for aerospace use. The lithium-ion cell charge-control unit will be useful to anyone who performs testing of battery cells for aerospace and non-aerospace uses and to anyone who manufacturers battery test equipment. This technology reduces the quantity of costly power supplies and independent channels that are needed for test programs in which multiple cells are tested. Battery test equipment manufacturers can integrate the technology into their battery test equipment as a method to manage charging of multiple cells in series. The unit manages a complex scheme that is required for charging Li-ion cells electrically connected in series. The unit makes it possible to evaluate cells together as a pack using a single primary test channel, while also making it possible to charge each cell individually. Hence, inherent cell-to-cell variations in a series string of cells can be addressed, and yet the cost of testing is reduced substantially below the cost of testing each cell as a separate entity. The unit consists of electronic circuits and thermal-management devices housed in a common package. It also includes isolated annunciators to signal when the cells are being actively bypassed. These annunciators can be used by external charge managers or can be connected in series to signal that all cells have reached maximum charge. The charge-control circuitry for each cell amounts to regulator circuitry and is powered by that cell, eliminating the need for an external power source or controller. A 110-VAC source of electricity is required to power the thermal-management portion of the unit. A small direct-current source can be used to supply power for an annunciator signal, if desired.

  2. The user's view of commercially available medical technology

    NASA Technical Reports Server (NTRS)

    Harrison, D. C.

    1975-01-01

    The potential user of new medical equipment for imaging the cardiovascular system is often faced with the problem of deciding whether or not to accept a new piece of equipment or a new technological concept into the practice of cardiology. Considerations for acquiring new medical technology are discussed in some detail. Acquisition of new technology should depend on whether the equipment provides more and relevant clinical data, is for research or for limited use, is properly engineered for patient use, presents information in easily storable and retrievable form, is tested and validated clinically, is fabricated by a reliable manufacturer, is cost effective, and may be readily replaced by a new technology.

  3. The history and development of NASA survival equipment.

    NASA Technical Reports Server (NTRS)

    Radnofsky, M. I.

    1972-01-01

    A research and development program on survival equipment was begun in early 1960 with the Mercury Program. The Mercury survival kit is discussed together with Gemini survival equipment, and Apollo I survival equipment. A study program is conducted to assess potential survival problems that may be associated with future space flights landing in polar waters. Survival kit requirements for applications on the Skylab program are also considered. Other investigations are concerned with the design of a global survival kit in connection with Space Shuttle missions.

  4. Cost Differentials and the Treatment of Equipment Assets: An Analysis of Alternatives.

    ERIC Educational Resources Information Center

    Frohreich, Lloyd E.

    This paper is a discussion of alternative state approaches to aiding and costing capital outlay programs, particularly equipment purchases for vocational programs. Equipment costs for vocational programs tend to be a larger proportion of the total costs than in other programs. The paper includes a discussion of such topics as the magnitude of…

  5. Alabama's Education Coalition Focuses on Supporting the State's Math, Science and Technology Initiative and on Building Distance Learning Programs

    NASA Astrophysics Data System (ADS)

    Denson, R. L.

    2003-12-01

    The Alabama Math Science Technology Educational Coalition (AMSTEC) was formed as a non-profit after a 1998 NASA Linking Leaders program brought in education and corporate leaders to address systemic education reform in Alabama public schools. AMSTEC was instrumental in the creation of the Alabama Math Science Technology Initiative (AMSTI), a K-12 program designed using data from national and international research and local teacher survey. In the face of dwindling government support in a state ranked last in education funding, AMSTEC believes that its best hope for improved STEM education lies in strengthening its community/industry partnerships and building upon the Department of Education's newly created AMSTI program. NASA's GLOBE program is the primary earth science education component being integrated into AMSTI. AMSTI is structured to provide teachers with (1) the materials, equipment, technology and supplies necessary to deliver high quality, inquiry-based instruction; (2) professional development linked directly to the educational resources with the intent of strengthening content knowledge, instructional strategies, and use of assessment tools; and (3) on-site support and mentoring throughout the year in the interest of achieving these goals. Roles for community partners to support these objectives far exceed that of mere funding - especially in the area of mentoring and professional development. Currently, AMSTEC consists of 100+ members including classroom teachers and district officers, education department representatives from higher educational institutions, policy makers and administrators, and government and industry representatives. AMSTEC remains partially tied to NASA fiscally and is administratively housed by the National Space Science and Technology Center's Earth System Science Center. AMSTEC's partnership emphasis is focused on increasing corporate and industry participation to support the implementation of AMSTI and its hub-site-based program. Future foci for AMSTEC are development and implementation of distance learning programs across Alabama's K-12 public schools.

  6. Efficiency improvement of technological preparation of power equipment manufacturing

    NASA Astrophysics Data System (ADS)

    Milukov, I. A.; Rogalev, A. N.; Sokolov, V. P.; Shevchenko, I. V.

    2017-11-01

    Competitiveness of power equipment primarily depends on speeding-up the development and mastering of new equipment samples and technologies, enhancement of organisation and management of design, manufacturing and operation. Actual political, technological and economic conditions cause the acute need in changing the strategy and tactics of process planning. At that the issues of maintenance of equipment with simultaneous improvement of its efficiency and compatibility to domestically produced components are considering. In order to solve these problems, using the systems of computer-aided process planning for process design at all stages of power equipment life cycle is economically viable. Computer-aided process planning is developed for the purpose of improvement of process planning by using mathematical methods and optimisation of design and management processes on the basis of CALS technologies, which allows for simultaneous process design, process planning organisation and management based on mathematical and physical modelling of interrelated design objects and production system. An integration of computer-aided systems providing the interaction of informative and material processes at all stages of product life cycle is proposed as effective solution to the challenges in new equipment design and process planning.

  7. Development of a Deployable Nonmetallic Boom for Reconfigurable Systems of Small Spacecraft

    NASA Technical Reports Server (NTRS)

    Rehnmark, Fredrik; Pryor, Mark; Holmes, Buck; Schaechter, David; Pedreiro, Nelson; Carrington, Connie

    2007-01-01

    In 2005, NASA commenced Phase 1 of the Modular Reconfigurable High Energy Technology Demonstrator (MRHE) program to investigate reconfigurable systems of small spacecraft. During that year, Lockheed Martin's Advanced Technology Center (ATC) led an accelerated effort to develop a 1-g MRHE concept demonstration featuring robotic spacecraft simulators equipped with docking mechanisms and deployable booms. The deployable boom built for MRHE was the result of a joint effort in which ATK was primarily responsible for developing and fabricating the Collapsible Rollable Tube (CRT patent pending) boom while Lockheed Martin designed and built the motorized Boom Deployment Mechanism (BDM) under a concurrent but separate IR&D program. Tight coordination was necessary to meet testbed integration and functionality requirements. This paper provides an overview of the CRT boom and BDM designs and presents preliminary results of integration and testing to support the MRHE demonstration.

  8. NASA Habitat Demonstration Unit (HDU) Deep Space Habitat Analog

    NASA Technical Reports Server (NTRS)

    Howe, A. Scott; Kennedy, Kriss J.; Gill, Tracy

    2013-01-01

    The NASA Habitat Demonstration Unit (HDU) vertical cylinder habitat was established as a exploration habitat testbed platform for integration and testing of a variety of technologies and subsystems that will be required in a human-occupied planetary surface outpost or Deep Space Habitat (DSH). The HDU functioned as a medium-fidelity habitat prototype from 2010-2012 and allowed teams from all over NASA to collaborate on field analog missions, mission operations tests, and system integration tests to help shake out equipment and provide feedback for technology development cycles and crew training. This paper documents the final 2012 configuration of the HDU, and discusses some of the testing that took place. Though much of the higher-fidelity functionality has 'graduated' into other NASA programs, as of this writing the HDU, renamed Human Exploration Research Analog (HERA), will continue to be available as a volumetric and operational mockup for NASA Human Research Program (HRP) research from 2013 onward.

  9. Telescience in the Space Station era

    NASA Technical Reports Server (NTRS)

    Schmerling, E. R.

    1988-01-01

    Telescience refers to the development of systems where participants involved in research in space can access their fellow scientists and the appropriate NASA services before flight, during flight, and after flight, preferably from their home institutions and through the same equipment. Telescience requires integration of available technologies to develop computer environments that maintain interoperability across different disciplines and different portions of the lifetimes of space experiments, called teledesign, teleoperations, and teleanalysis. Participants in the NASA Telescience Testbed Program are using a rigid prototyping approach to evaluate the necessary technologies and select the options and tradeoffs that best suit their accustomed modalities. The concept of transaction management is described, where the emphasis is placed on the effects of commands, whether event-generated onboard the spacecraft or sent up from the ground. Interoperability, security, and privacy issues are also discussed, and the Telescience Testbed Pilot Program is described.

  10. 41 CFR 109-1.100-51 - Definitions and acronyms.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... nuclear-related material, equipment, and related technology as described in the International Atomic..., material, or technology as described in the Nuclear Suppliers Group Trigger List and Dual-Use List, or equipment, material or technology used in the research, design, development, testing, or production of...

  11. 41 CFR 109-1.100-51 - Definitions and acronyms.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... nuclear-related material, equipment, and related technology as described in the International Atomic..., material, or technology as described in the Nuclear Suppliers Group Trigger List and Dual-Use List, or equipment, material or technology used in the research, design, development, testing, or production of...

  12. 41 CFR 109-1.100-51 - Definitions and acronyms.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... nuclear-related material, equipment, and related technology as described in the International Atomic..., material, or technology as described in the Nuclear Suppliers Group Trigger List and Dual-Use List, or equipment, material or technology used in the research, design, development, testing, or production of...

  13. Federal incentives for industrial modernization: Historical review and future opportunities

    NASA Technical Reports Server (NTRS)

    Coleman, Sandra C.; Batson, Robert G.

    1987-01-01

    Concerns over the aging of the U.S. aerospace industrial base led DOD to introduce first its Technology Modernization (Tech Mod) Program, and more recently the Industrial Modernization Incentive Program (IMIP). These incentives include productivity shared savings rewards, contractor investment protection to allow for amortization of plant and equipment, and subcontractor/vendor participation. The purpose here is to review DOD IMIP and to evaluate whether a similar program is feasible for NASA and other non-DOD agencies. The IMIP methodology is of interest to industrial engineers because it provides a structured, disciplined approach to identifying productivity improvement opportunities and documenting their expected benefit. However, it is shown that more research on predicting and validating cost avoidance is needed.

  14. Growing a Technology Equipment Service in an Academic Library

    ERIC Educational Resources Information Center

    Anderson, Sean; Weatherbee, Sue

    2012-01-01

    The 21st-century student is highly technological. In order to encourage and enable the technologically advanced students, the authors wanted to develop a technology equipment service in the library at Texas A&M University-Commerce. They had an idea of what they wanted to accomplish but were unsure of how to get started. They started a small…

  15. Balloon-borne three-meter telescope for far-infrared and submillimeter astronomy

    NASA Technical Reports Server (NTRS)

    Fazio, Giovanni G.; Hoffmann, William F.; Harper, Doyal A.

    1988-01-01

    The scientific objectives, engineering analysis and design, results of technology development, and focal-plane instrumentation for a two-meter balloon-borne telescope for far-infrared and submillimeter astronomy are presented. The unique capabilities of balloon-borne observations are discussed. A program summary emphasizes the development of the two-meter design. The relationship of the Large Deployable Reflector (LDR) is also discussed. Detailed treatment is given to scientific objectives, gondola design, the mirror development program, experiment accommodations, ground support equipment requirements, NSBF design drivers and payload support requirements, the implementation phase summary development plan, and a comparison of three-meter and two-meter gondola concepts.

  16. Conquest of darkness by management of the stars

    NASA Astrophysics Data System (ADS)

    Wiseman, Robert S.

    This text was presented as the Thomas B. Dowd Memorial Lecture for 1991 national Infrared Information Symposium (IRIS). The history of Army Night Vision from World War II to 1972 proves how the right organization with talented people and proper support can succeed. This presentation not only illustrates the growth of image intensifier technology and families of equipment, but the key events and stars that made it all happen. Described are the management techniques used and how to organize for effective research, development, engineering, and production programs; the evolution of the Far Infrared Common Module program is described; and how the Night Vision Laboratory was unique.

  17. Aerial photo shows RLV complex at KSC

    NASA Technical Reports Server (NTRS)

    2000-01-01

    In the foreground of this aerial photo is the Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. At right is a multi-purpose hangar and to its left is a building for related ground support equipment and administrative/ technical support. The complex is situated at the Shuttle Landing Facility (center). At the upper left is the runway. The RLV complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC.

  18. KSC-99pp1263

    NASA Image and Video Library

    1999-10-29

    A steam roller packs down the ground next to construction of a support building, part of the $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. The RLV complex, which includes a multi-purpose hangar and the building to be used for related ground support equipment and administrative/technical support, will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

  19. KSC-99pp1265

    NASA Image and Video Library

    1999-10-29

    Construction workers are silhouetted against the sky as they work on the girders of a support building, part of the new $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. The building is to be used for related ground support equipment and administrative/technical support. The RLV complex also includes a multi-purpose hangar. The complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The facility, jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC, will be operational in early 2000

  20. Industrial scale-plant for HLW partitioning in Russia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dzekun, E.G.; Glagolenko, Y.V.; Drojko, E.G.

    1996-12-31

    Radiochemical plant of PA <> at Ozersk, which was come on line in December 1948 originally for weapon plutonium production and reoriented on the reprocessing of spent fuel, till now keeps on storage HLW of the military program. Application of the vitrification method since 1986 has not essentially reduced HLW volumes. So, as of September 1, 1995 vitrification installations had been processed 9590 m{sup 3} HLW and 235 MCi of radionuclides was included in glass. However only 1100 m{sup 3} and 20.5 MCi is part of waste of the military program. The reason is the fact, that the technology andmore » equipment of vitrification were developed for current waste of Purex-process, for which low contents of corrosion-dangerous impurity to materials of vitrification installation is characteristic of. With reference to HLW, which are growing at PA <> in the course of weapon plutonium production, the program of Science-Research Works includes the following main directions of work. Development of technology and equipment of installations for immobilising HLW with high contents of impurity into a solid form at induction melter. Application of High-temperature Adsorption Method for sorption of radionuclides from HLW on silica gel. Application of Partitioning Method of radionuclides from HLW, based on extraction cesium and strontium into cobalt dicarbollyde or crown-ethers, but also on recovery of cesium radionuclides by sorption on inorganic sorbents. In this paper the results of work on creation of first industrial scale-plant for partitioning HLW by the extraction and sorption methods are reported.« less

  1. [The Mexican Institute of Social Security Institute (IMSS) in Numbers. Functional inventory of imaging medical equipment, 2003].

    PubMed

    2005-01-01

    Medical technology is a fundamental instrument for the provision of health services in the Mexican Institute of Social Security (IMSS) and as a support for diagnostic and therapeutic interventions. The inventory of relevant medical equipment describes the needs for upgrading the technological infrastructure, organize its distribution and plan its renovation in order to guarantee the quality of health services. In this report we describe the type of equipment used in radiology and other imaging services, its geographical distribution, median age in operation and its productivity. The inventory reported 2091 pieces of equipment, ultrasonography and radiology were the most common types (31%) followed by fluoroscopic equipment (20%). Follow-up in the inventory should help in planning the acquisition and maintenance of sophisticated technology used for medical purposes.

  2. Strategic Communication Science and Technology Plan: Current Activities, Capability Gaps and Areas for Further Investment

    DTIC Science & Technology

    2009-04-01

    STRATEGIC COMMUNICATION  SCIENCE AND TECHNOLOGY  PLAN  C A   URRENT ACTIVITIES, CAPABILITY  GAPS   ND  AREAS  FOR FURTHER INVESTMENT  April 2009... Gaps and Areas for Further Investment 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...Empowering the interagency process 17 3. Equipping for an information- based future 18 4. Facilitating audience activities 19 AREAS

  3. AQUILA Remotely Piloted Vehicle System Technology Demonstrator (RPV-STD) Program. Volume I. System Description and Capabilities

    DTIC Science & Technology

    1979-04-01

    tools, simplification of equipment interfaces involved in manual operations to provide simple system preparation, closing flight control inner loops ...alti- tude, and heading rate. The closed loops operate in three primary modes: cruise, dead reckoning, and approach. The aircraft is stabilized by...onboard closed loops , so the operator is not required to maintain hands-on operation to keep it in the air. The operator is able to command airspeed

  4. Health technopole: innovation applied to clinical engineering & health technology management education.

    PubMed

    Vilcahuaman, L; Rivas, R

    2010-01-01

    In the Peruvian Health System, Clinical Engineering does not exist as a topic of intervention. 59% of biomedical equipment is officially classified as operational, however next to apply the correct classification methodology and include security issues, only 10% of the equipment are suitable for use in patients. The serious consequences for patients, is opposite to the increased public investment in the health sector. Reversing this context leads to structural changes at all levels of the organization and they will be achievable only through an appropriate educational program. A strategy focused on joint of capacities called Health Technopole has managed to implement an innovative Model of Education in Healthcare Technology Management HTM and Clinical Engineering CE aimed at solving this problem. The proposal focused on strategies to strengthen the educational goals such as creating HTM & CE Units in hospitals, the implementation of the methodology: Problem Based Learning and Project Management in HTM & CE in classroom and on line courses. The process includes an effective interaction with global organizations through teleconferences, Internships, Workshops and Seminars. A key component was the sustained multidisciplinary approach. Health Technopole CENGETS is an expert adviser for the Ministry of Health and is called for trainings, design training programs for regional governments and also supports global organizations such as PAHO / WHO and ORAS / CONHU. The proposal of innovation applied to HTM & CE Education is effective and is a benchmark for similar countries.

  5. 77 FR 38375 - Advisory Circular (AC) 150/5345-53D, Airport Lighting Equipment Certification Program; Proposed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-27

    ...The FAA proposes to replace AC150/5345-53C with AC150/5345-53D to clarify the criteria under the Airport Lighting Equipment Certification Program (ALECP) for acceptance of an organization as a third party certification body (third party certifier) and how manufacturers may get equipment qualified under the program. The Secretary of Transportation is providing notice in the Federal Register of, and an opportunity for public comment on AC150/5345-53D, Airport Lighting Equipment Certification Program.

  6. 77 FR 16769 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and Test Procedures for...-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010... Industrial Equipment, which includes the commercial heating, air-conditioning, and water-heating equipment...

  7. 75 FR 71596 - Energy Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-24

    ... Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures for Commercial Refrigeration Equipment AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... amendments to its test procedure for commercial refrigeration equipment (CRE). The amendments would update...

  8. Identification of the actual state and entity availability forecasting in power engineering using neural-network technologies

    NASA Astrophysics Data System (ADS)

    Protalinsky, O. M.; Shcherbatov, I. A.; Stepanov, P. V.

    2017-11-01

    A growing number of severe accidents in RF call for the need to develop a system that could prevent emergency situations. In a number of cases accident rate is stipulated by careless inspections and neglects in developing repair programs. Across the country rates of accidents are growing because of a so-called “human factor”. In this regard, there has become urgent the problem of identification of the actual state of technological facilities in power engineering using data on engineering processes running and applying artificial intelligence methods. The present work comprises four model states of manufacturing equipment of engineering companies: defect, failure, preliminary situation, accident. Defect evaluation is carried out using both data from SCADA and ASEPCR and qualitative information (verbal assessments of experts in subject matter, photo- and video materials of surveys processed using pattern recognition methods in order to satisfy the requirements). Early identification of defects makes possible to predict the failure of manufacturing equipment using mathematical techniques of artificial neural network. In its turn, this helps to calculate predicted characteristics of reliability of engineering facilities using methods of reliability theory. Calculation of the given parameters provides the real-time estimation of remaining service life of manufacturing equipment for the whole operation period. The neural networks model allows evaluating possibility of failure of a piece of equipment consistent with types of actual defects and their previous reasons. The article presents the grounds for a choice of training and testing samples for the developed neural network, evaluates the adequacy of the neural networks model, and shows how the model can be used to forecast equipment failure. There have been carried out simulating experiments using a computer and retrospective samples of actual values for power engineering companies. The efficiency of the developed model for different types of manufacturing equipment has been proved. There have been offered other research areas in terms of the presented subject matter.

  9. Improving the Reliability of Technological Subsystems Equipment for Steam Turbine Unit in Operation

    NASA Astrophysics Data System (ADS)

    Brodov, Yu. M.; Murmansky, B. E.; Aronson, R. T.

    2017-11-01

    The authors’ conception is presented of an integrated approach to reliability improving of the steam turbine unit (STU) state along with its implementation examples for the various STU technological subsystems. Basing on the statistical analysis of damage to turbine individual parts and components, on the development and application of modern methods and technologies of repair and on operational monitoring techniques, the critical components and elements of equipment are identified and priorities are proposed for improving the reliability of STU equipment in operation. The research results are presented of the analysis of malfunctions for various STU technological subsystems equipment operating as part of power units and at cross-linked thermal power plants and resulting in turbine unit shutdown (failure). Proposals are formulated and justified for adjustment of maintenance and repair for turbine components and parts, for condenser unit equipment, for regeneration subsystem and oil supply system that permit to increase the operational reliability, to reduce the cost of STU maintenance and repair and to optimize the timing and amount of repairs.

  10. Nuclear Safety via Commercial Grade Dedication - Hitting the Right Target - 12163

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kindred, Greg

    2012-07-01

    S.A.Technology has developed and implemented a highly effective Commercial Grade Dedication program that has been used to qualify a variety of equipment to the rigorous requirements of ASTM NQA-1. In specific cases, S.A.Technology personnel have worked closely with clients to develop complex Commercial Grade Dedication plans that satisfy the scrutiny of the US Department of Energy. These projects have been as simple as Passive Mechanical systems, and as complicated as Active Mechanical and Electrical systems. S.A.Technology's Commercial Grade Dedication plans have even been used as presentation materials to a client's internal departments encompassing Engineering, Quality and Procurement. This is themore » new target of today's CGD: exposing the reasoning behind the dedication process. Previously, only test and inspection results were expected. Today's CGD now needs to show how the decisions presented are the right decisions to make. We must be willing to undergo the process of learning how each new piece of equipment is affected by the system it is placed into, as well as understanding how that equipment can affect the system itself. It is a much more complicated and time-consuming endeavor to undertake. On top of it all, we must be able to voice those discoveries and rationalizations in a clear and concise manner. Unless we effectively communicate our intentions to the reader, we will not be understood. If researched correctly and presented properly, today's Commercial Grade Dedication plans will answer the appropriate questions before they are asked. (authors)« less

  11. Library Buildings and Equipment Section. Management and Technology Division. Papers.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on library buildings and equipment, which were presented at the 1983 International Federation of Library Associations (IFLA) conference, include: (1) "The Impact of Technology on Library Buildings," in which Rolf Fuhlrott (West Germany) discusses construction technology (types of building materials and library building design),…

  12. [Development of a service on line advice and information technology management for health].

    PubMed

    Berrospi Polo, Victor; Rodriguez Abad, Juan; Bobadilla Aguilar, Juan; Di Liberto Moreno, Carlos; Díaz Arroyo, Cecilia; Rafael Quipan, Carlos

    2015-10-01

    To validate an advisory service and online information technology management for health and helps to make assessment and acquisition processes an informed medical equipment according to the market and the needs of the health institutions. Internet via a technological solution supported ona data base containing systematic and updated information on technical specifications of 25 compared medical equipment, the same reference prices, list of suppliers, agents and / or producers and technical standards are developed. The"virtual" technical assistance was made with the support of a team of specialists in Health Technology Management, the decision makers in the planning, evaluation and procurement of biomedical equipment. The validation of the service was conducted by involving specialists in the field of Health Technology Management, from different disciplines and institutions who worked in health, public and private. They used the service for a period of time to verify its feasibility of use as well as its usefulness for their planning, evaluation and procurement of biomedical equipment. To these experts we applied a survey before and after them about the software developed in this project. We found that it is common to use the internet to search for information on medical equipment.Also,an increase on the view that the application will help in procurement of biomedical equipment(40% to 78%) was observed, it will improve the information system(40% to 89%) and communication among physicians,nurses, planners, engineers and other professionals involved in this process(20% to 78%). There is a need for a technological tool available with such features contribute to technology management in Peru.

  13. Implementation of Quality Management in Core Service Laboratories

    PubMed Central

    Creavalle, T.; Haque, K.; Raley, C.; Subleski, M.; Smith, M.W.; Hicks, B.

    2010-01-01

    CF-28 The Genetics and Genomics group of the Advanced Technology Program of SAIC-Frederick exists to bring innovative genomic expertise, tools and analysis to NCI and the scientific community. The Sequencing Facility (SF) provides next generation short read (Illumina) sequencing capacity to investigators using a streamlined production approach. The Laboratory of Molecular Technology (LMT) offers a wide range of genomics core services including microarray expression analysis, miRNA analysis, array comparative genome hybridization, long read (Roche) next generation sequencing, quantitative real time PCR, transgenic genotyping, Sanger sequencing, and clinical mutation detection services to investigators from across the NIH. As the technology supporting this genomic research becomes more complex, the need for basic quality processes within all aspects of the core service groups becomes critical. The Quality Management group works alongside members of these labs to establish or improve processes supporting operations control (equipment, reagent and materials management), process improvement (reengineering/optimization, automation, acceptance criteria for new technologies and tech transfer), and quality assurance and customer support (controlled documentation/SOPs, training, service deficiencies and continual improvement efforts). Implementation and expansion of quality programs within unregulated environments demonstrates SAIC-Frederick's dedication to providing the highest quality products and services to the NIH community.

  14. Production of rotational parts in small-series and computer-aided planning of its production engineering

    NASA Astrophysics Data System (ADS)

    Dudas, Illes; Berta, Miklos; Cser, Istvan

    1998-12-01

    Up-to-date manufacturing equipments of production of rotational parts in small series are lathe-centers and CNC grinding machines with high concentration of manufacturing operations. By the use of these machine tools it can be produced parts with requirements of increased accuracy and surface quality. In the lathe centers, which contain the manufacturing procedures of lathes using stationary tools and of drilling-milling machine tools using rotational tools, non-rotational surfaces of rotational parts can also be produced. The high concentration of manufacturing operations makes necessary the planning and programing of the measuring, monitoring and quality control into the technological process during manufacturing operation. In this way, taking into consideration the technological possibilities of lathe canters, the scope of computer aided technological planning duties significantly increases. It is trivial requirement to give only once the descriptions of the prefabricated parts and ready made parts. Starting taking into account these careful considerations we have been developing the planning system of technology of body of revolution on the base of GTIPROG/EC system which useful for programming of lathe centers. Out paper deals with the results of development and the occurring problems.

  15. Role of information technology (IT) in public health, India (problems & prospects): Role of information communication technology (ICT) in disease surveillance under Integrated Disease Surveillance Project (IDSP).

    PubMed

    Sharma, Rajeev; Luthra, Pallavi; Karad, Amit; Dhariwal, A C; Ichhpujani, R L; Lal, Shiv

    2010-06-01

    Information Communication Technology (ICT) has proven to be a strong public health tool. Keeping the future need of country and building National Disease Surveillance System, Integrated Disease Surveillance Project (IDSP) was launched by Hon'ble Union Minister of Health & Family Welfare in November 2004. It is a decentralized, State based surveillance program in the country. It is intended to detect early warning signals of impending outbreaks and help initiate an effective response in a timely manner. One of the major components of the project is the - use of Information Technology for collection, collation, compilation, analysis and dissemination of data besides distance education and video conferencing. A network of 800 sites across India has been established through Satellite, Broadband and High end Video conferencing equipments. The network is managed by a team of data managers and data entry operators at all state surveillance units and district surveillance units respectively. The network was proven to be extremely useful to respond to the current influenza A H1N1 pandemic. It is proposed to extend the network to cover private sector and provide convergence with other National Health Programs.

  16. 42 CFR 495.354 - Rules for charging equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Rules for charging equipment. 495.354 Section 495.354 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... PROGRAM Requirements Specific to the Medicaid Program § 495.354 Rules for charging equipment. Equipment...

  17. 41 CFR 101-26.507 - Security equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true Security equipment. 101... PROGRAM 26.5-GSA Procurement Programs § 101-26.507 Security equipment. Federal agencies and other activities authorized to purchase security equipment through GSA sources shall do so in accordance with the...

  18. 41 CFR 101-26.507 - Security equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Security equipment. 101... PROGRAM 26.5-GSA Procurement Programs § 101-26.507 Security equipment. Federal agencies and other activities authorized to purchase security equipment through GSA sources shall do so in accordance with the...

  19. 41 CFR 101-26.507 - Security equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 2 2014-07-01 2012-07-01 true Security equipment. 101... PROGRAM 26.5-GSA Procurement Programs § 101-26.507 Security equipment. Federal agencies and other activities authorized to purchase security equipment through GSA sources shall do so in accordance with the...

  20. 41 CFR 101-26.507 - Security equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Security equipment. 101... PROGRAM 26.5-GSA Procurement Programs § 101-26.507 Security equipment. Federal agencies and other activities authorized to purchase security equipment through GSA sources shall do so in accordance with the...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top