Sample records for equivalent methods acceptable

  1. 40 CFR 63.90 - Program overview.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... “proven technology” (generally accepted by the scientific community as equivalent or better) that is... enforceable test method involving “proven technology” (generally accepted by the scientific community as... interest; and (3) “Combining” a federally required method with another proven method for application to...

  2. 40 CFR 63.90 - Program overview.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... “proven technology” (generally accepted by the scientific community as equivalent or better) that is... enforceable test method involving “proven technology” (generally accepted by the scientific community as... interest; and (3) “Combining” a federally required method with another proven method for application to...

  3. Optimal Sample Size Determinations for the Heteroscedastic Two One-Sided Tests of Mean Equivalence: Design Schemes and Software Implementations

    ERIC Educational Resources Information Center

    Jan, Show-Li; Shieh, Gwowen

    2017-01-01

    Equivalence assessment is becoming an increasingly important topic in many application areas including behavioral and social sciences research. Although there exist more powerful tests, the two one-sided tests (TOST) procedure is a technically transparent and widely accepted method for establishing statistical equivalence. Alternatively, a direct…

  4. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  5. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  6. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  7. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  8. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  9. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  10. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  11. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  12. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  13. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  14. 40 CFR 63.90 - Program overview.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... calibration gases or test cells; (4) Use of an analytical technology that differs from that specified by a... “proven technology” (generally accepted by the scientific community as equivalent or better) that is... enforceable test method involving “proven technology” (generally accepted by the scientific community as...

  15. 40 CFR 63.90 - Program overview.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... calibration gases or test cells; (4) Use of an analytical technology that differs from that specified by a... “proven technology” (generally accepted by the scientific community as equivalent or better) that is... enforceable test method involving “proven technology” (generally accepted by the scientific community as...

  16. 40 CFR 63.90 - Program overview.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... calibration gases or test cells; (4) Use of an analytical technology that differs from that specified by a... “proven technology” (generally accepted by the scientific community as equivalent or better) that is... enforceable test method involving “proven technology” (generally accepted by the scientific community as...

  17. Cross-cultural equivalence in translations of the oral health impact profile.

    PubMed

    MacEntee, Michael I; Brondani, Mario

    2016-04-01

    The Oral Health Impact Profile (OHIP) has been translated for comparisons across cultural boundaries. This report on a systematic search of literature published between 1994 and 2014 aims to identify an acceptable method of translating psychometric instruments for cross-cultural equivalence, and how they were used to translate the OHIP. An electronic search used the keywords 'cultural adaptation', 'validation', 'Oral Health Impact Profile' and 'OHIP' in MEDLINE and EMBASE databases supplemented by reference links and grey literature. It included papers on methods of cross-cultural translation and translations of the OHIP for dentulous adults and adolescents, and excluded papers without translational details or limited to specific disorders. The search identified eight steps to cross-cultural equivalence, and 36 (plus three supplemental) translations of the OHIP. The steps involve assessment of (i) forward/backward translation by committee, (ii) constructs, (iii) item interpretations, (iv) interval scales, (v) convergent validity, (vi) discriminant validity, (vii) responsiveness to clinical change and (viii) pilot tests. Most (>60%) of the translations involved forward/backward translation by committee, item interpretations, interval scales, convergence, discrimination and pilot tests, but fewer assessed the underlying theory (47%) or responsiveness to clinical change (28%). An acceptable method for translating quality of life-related psychometric instruments for cross-cultural equivalence has eight procedural steps, and most of the 36 OHIP translations involved at least five of the steps. Only translations to Saudi Arabian Arabic, Chinese Mandarin, German and Japanese used all eight steps to claim cultural equivalence with the original OHIP. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  18. Establishment of an equivalence acceptance criterion for accelerated stability studies.

    PubMed

    Burdick, Richard K; Sidor, Leslie

    2013-01-01

    In this article, the use of statistical equivalence testing for providing evidence of process comparability in an accelerated stability study is advocated over the use of a test of differences. The objective of such a study is to demonstrate comparability by showing that the stability profiles under nonrecommended storage conditions of two processes are equivalent. Because it is difficult at accelerated conditions to find a direct link to product specifications, and hence product safety and efficacy, an equivalence acceptance criterion is proposed that is based on the statistical concept of effect size. As with all statistical tests of equivalence, it is important to collect input from appropriate subject-matter experts when defining the acceptance criterion.

  19. Polyimide Prepregs With Improved Tack

    NASA Technical Reports Server (NTRS)

    Vanucci, R.

    1987-01-01

    Drape and tack improved without loss of strength. Composites made with PMR-15 (or equivalent) polyimides have gained acceptance as viable engineering materials for high-use-temperature applications. Acceptance due to both thermo-oxidative stability of PMR-15 (or equivalent) and ease which PMR-15 (or equivalent) prepreg materials processed into composite structures.

  20. Dose Equivalents for Antipsychotic Drugs: The DDD Method.

    PubMed

    Leucht, Stefan; Samara, Myrto; Heres, Stephan; Davis, John M

    2016-07-01

    Dose equivalents of antipsychotics are an important but difficult to define concept, because all methods have weaknesses and strongholds. We calculated dose equivalents based on defined daily doses (DDDs) presented by the World Health Organisation's Collaborative Center for Drug Statistics Methodology. Doses equivalent to 1mg olanzapine, 1mg risperidone, 1mg haloperidol, and 100mg chlorpromazine were presented and compared with the results of 3 other methods to define dose equivalence (the "minimum effective dose method," the "classical mean dose method," and an international consensus statement). We presented dose equivalents for 57 first-generation and second-generation antipsychotic drugs, available as oral, parenteral, or depot formulations. Overall, the identified equivalent doses were comparable with those of the other methods, but there were also outliers. The major strength of this method to define dose response is that DDDs are available for most drugs, including old antipsychotics, that they are based on a variety of sources, and that DDDs are an internationally accepted measure. The major limitations are that the information used to estimate DDDS is likely to differ between the drugs. Moreover, this information is not publicly available, so that it cannot be reviewed. The WHO stresses that DDDs are mainly a standardized measure of drug consumption, and their use as a measure of dose equivalence can therefore be misleading. We, therefore, recommend that if alternative, more "scientific" dose equivalence methods are available for a drug they should be preferred to DDDs. Moreover, our summary can be a useful resource for pharmacovigilance studies. © The Author 2016. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  1. 14 CFR 23.621 - Casting factors.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... either magnetic particle, penetrant or other approved equivalent non-destructive inspection method; or... percent approved non-destructive inspection. When an approved quality control procedure is established and an acceptable statistical analysis supports reduction, non-destructive inspection may be reduced from...

  2. 14 CFR 23.621 - Casting factors.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... either magnetic particle, penetrant or other approved equivalent non-destructive inspection method; or... percent approved non-destructive inspection. When an approved quality control procedure is established and an acceptable statistical analysis supports reduction, non-destructive inspection may be reduced from...

  3. 14 CFR 23.621 - Casting factors.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... either magnetic particle, penetrant or other approved equivalent non-destructive inspection method; or... percent approved non-destructive inspection. When an approved quality control procedure is established and an acceptable statistical analysis supports reduction, non-destructive inspection may be reduced from...

  4. 14 CFR 23.621 - Casting factors.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... either magnetic particle, penetrant or other approved equivalent non-destructive inspection method; or... percent approved non-destructive inspection. When an approved quality control procedure is established and an acceptable statistical analysis supports reduction, non-destructive inspection may be reduced from...

  5. Design and experimental verification of an equivalent forebody to produce disturbances equivalent to those of a forebody with flowing inlets

    NASA Technical Reports Server (NTRS)

    Haynes, Davy A.; Miller, David S.; Klein, John R.; Louie, Check M.

    1988-01-01

    A method by which a simple equivalent faired body can be designed to replace a more complex body with flowing inlets has been demonstrated for supersonic flow. An analytically defined, geometrically simple faired inlet forebody has been designed using a linear potential code to generate flow perturbations equivalent to those produced by a much more complex forebody with inlets. An equivalent forebody wind-tunnel model was fabricated and a test was conducted in NASA Langley Research Center's Unitary Plan Wind Tunnel. The test Mach number range was 1.60 to 2.16 for angles of attack of -4 to 16 deg. Test results indicate that, for the purposes considered here, the equivalent forebody simulates the original flowfield disturbances to an acceptable degree of accuracy.

  6. 40 CFR 53.4 - Applications for reference or equivalent method determinations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) Required or recommended routine, periodic, and preventative maintenance and maintenance schedules. (J) Any... methods for PM 2.5 and PM 10-2,5 must be described in sufficient detail, based on the elements described... Table A-1 to this subpart) will be met throughout the warranty period and that the applicant accepts...

  7. 40 CFR 53.4 - Applications for reference or equivalent method determinations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) Required or recommended routine, periodic, and preventative maintenance and maintenance schedules. (J) Any... methods for PM 2.5 and PM 10-2.5 must be described in sufficient detail, based on the elements described... Table A-1 to this subpart) will be met throughout the warranty period and that the applicant accepts...

  8. 40 CFR 53.4 - Applications for reference or equivalent method determinations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) Required or recommended routine, periodic, and preventative maintenance and maintenance schedules. (J) Any... methods for PM2.5 and PM10−2.5 must be described in sufficient detail, based on the elements described in... Table A-1 to this subpart) will be met throughout the warranty period and that the applicant accepts...

  9. 40 CFR 53.4 - Applications for reference or equivalent method determinations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) Required or recommended routine, periodic, and preventative maintenance and maintenance schedules. (J) Any... methods for PM2.5 and PM10−2.5 must be described in sufficient detail, based on the elements described in... Table A-1 to this subpart) will be met throughout the warranty period and that the applicant accepts...

  10. Application of the modified chi-square ratio statistic in a stepwise procedure for cascade impactor equivalence testing.

    PubMed

    Weber, Benjamin; Lee, Sau L; Delvadia, Renishkumar; Lionberger, Robert; Li, Bing V; Tsong, Yi; Hochhaus, Guenther

    2015-03-01

    Equivalence testing of aerodynamic particle size distribution (APSD) through multi-stage cascade impactors (CIs) is important for establishing bioequivalence of orally inhaled drug products. Recent work demonstrated that the median of the modified chi-square ratio statistic (MmCSRS) is a promising metric for APSD equivalence testing of test (T) and reference (R) products as it can be applied to a reduced number of CI sites that are more relevant for lung deposition. This metric is also less sensitive to the increased variability often observed for low-deposition sites. A method to establish critical values for the MmCSRS is described here. This method considers the variability of the R product by employing a reference variance scaling approach that allows definition of critical values as a function of the observed variability of the R product. A stepwise CI equivalence test is proposed that integrates the MmCSRS as a method for comparing the relative shapes of CI profiles and incorporates statistical tests for assessing equivalence of single actuation content and impactor sized mass. This stepwise CI equivalence test was applied to 55 published CI profile scenarios, which were classified as equivalent or inequivalent by members of the Product Quality Research Institute working group (PQRI WG). The results of the stepwise CI equivalence test using a 25% difference in MmCSRS as an acceptance criterion provided the best matching with those of the PQRI WG as decisions of both methods agreed in 75% of the 55 CI profile scenarios.

  11. DEVELOPMENT OF A REFINED DATABASE OF MAMMALIAN RELATIVE POTENCY ESTIMATES FOR DIOXIN-LIKE COMPOUNDS

    EPA Science Inventory

    The toxic equivalency factor (TEF) approach has been widely accepted as the most feasible method available at present for evaluating potential health risks associated with exposure to mixtures of dioxin-like compounds (DLCs). The current mammalian TEFs for the DLCs were establis...

  12. 41 CFR 102-80.125 - Who has the responsibility for determining the acceptability of each equivalent level of safety...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... departments or other local authorities for use in developing pre-fire plans. ... Fire Prevention Equivalent Level of Safety Analysis § 102-80.125 Who has the responsibility for... acceptability must include a review of the fire protection engineer's qualifications, the appropriateness of the...

  13. 41 CFR 102-80.125 - Who has the responsibility for determining the acceptability of each equivalent level of safety...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... departments or other local authorities for use in developing pre-fire plans. ... Fire Prevention Equivalent Level of Safety Analysis § 102-80.125 Who has the responsibility for... acceptability must include a review of the fire protection engineer's qualifications, the appropriateness of the...

  14. 41 CFR 102-80.125 - Who has the responsibility for determining the acceptability of each equivalent level of safety...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... departments or other local authorities for use in developing pre-fire plans. ... Fire Prevention Equivalent Level of Safety Analysis § 102-80.125 Who has the responsibility for... acceptability must include a review of the fire protection engineer's qualifications, the appropriateness of the...

  15. 41 CFR 102-80.125 - Who has the responsibility for determining the acceptability of each equivalent level of safety...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... departments or other local authorities for use in developing pre-fire plans. ... Fire Prevention Equivalent Level of Safety Analysis § 102-80.125 Who has the responsibility for... acceptability must include a review of the fire protection engineer's qualifications, the appropriateness of the...

  16. 41 CFR 102-80.125 - Who has the responsibility for determining the acceptability of each equivalent level of safety...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... departments or other local authorities for use in developing pre-fire plans. ... Fire Prevention Equivalent Level of Safety Analysis § 102-80.125 Who has the responsibility for... acceptability must include a review of the fire protection engineer's qualifications, the appropriateness of the...

  17. 40 CFR 60.493 - Performance test and compliance provisions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... equivalent or alternative method. The owner or operator shall determine from company records the volume of... estimate the volume of coating used at each facility by using the average dry weight of coating, number of... acceptable to the Administrator. (i) Calculate the volume-weighted average of the total mass of VOC per...

  18. The transfer of analytical procedures.

    PubMed

    Ermer, J; Limberger, M; Lis, K; Wätzig, H

    2013-11-01

    Analytical method transfers are certainly among the most discussed topics in the GMP regulated sector. However, they are surprisingly little regulated in detail. General information is provided by USP, WHO, and ISPE in particular. Most recently, the EU emphasized the importance of analytical transfer by including it in their draft of the revised GMP Guideline. In this article, an overview and comparison of these guidelines is provided. The key to success for method transfers is the excellent communication between sending and receiving unit. In order to facilitate this communication, procedures, flow charts and checklists for responsibilities, success factors, transfer categories, the transfer plan and report, strategies in case of failed transfers, tables with acceptance limits are provided here, together with a comprehensive glossary. Potential pitfalls are described such that they can be avoided. In order to assure an efficient and sustainable transfer of analytical procedures, a practically relevant and scientifically sound evaluation with corresponding acceptance criteria is crucial. Various strategies and statistical tools such as significance tests, absolute acceptance criteria, and equivalence tests are thoroughly descibed and compared in detail giving examples. Significance tests should be avoided. The success criterion is not statistical significance, but rather analytical relevance. Depending on a risk assessment of the analytical procedure in question, statistical equivalence tests are recommended, because they include both, a practically relevant acceptance limit and a direct control of the statistical risks. However, for lower risk procedures, a simple comparison of the transfer performance parameters to absolute limits is also regarded as sufficient. Copyright © 2013 Elsevier B.V. All rights reserved.

  19. DEVELOPMENT OF A REFINED DATABASE OF RELATIVE POTENCY ESTIMATES TO FACILITATE BETTER CHARACTERIZATION OF VARIABILITY AND UNCERTAINTY IN THE CURRENT MAMMALIAN TEFS FOR PCDDS, PCDFS, AND DIOXIN-LIKE PCBS

    EPA Science Inventory

    The toxic equivalency factor (TEF) approach has been widely accepted as the most feasible and plausible method presently available for evaluating potential health risks associated with exposure to mixtures of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofuran...

  20. Natural and induced variation in tomato fruit: an assessment of substantial equivalence relative to stakeholder acceptable chemical diversity

    USDA-ARS?s Scientific Manuscript database

    Unintended effects to food quality and composition occur no matter the method of plant improvement. The existence of unintended effects is perhaps not the most important point within the discussion, but rather the identity and significance of the compositional changes observed. Here we report the ex...

  1. Measurement of nicotine withdrawal symptoms: linguistic validation of the Wisconsin Smoking Withdrawal Scale (WSWS) in Malay.

    PubMed

    Awaisu, Ahmed; Samsudin, Sulastri; Amir, Nur A; Omar, Che G; Hashim, Mohd I; Mohamad, Mohamed H Nik; Shafie, Asrul A; Hassali, Mohamed A

    2010-05-22

    The purpose of the linguistic validation of the Wisconsin Smoking Withdrawal Scale (WSWS) was to produce a translated version in Malay language which was "conceptually equivalent" to the original U.S. English version for use in clinical practice and research. A seven-member translation committee conducted the translation process using the following methodology: production of two independent forward translations; comparison and reconciliation of the translations; backward translation of the first reconciled version; comparison of the original WSWS and the backward version leading to the production of the second reconciled version; pilot testing and review of the translation, and finalization. Linguistic and conceptual issues arose during the process of translating the instrument, particularly pertaining to the title, instructions, and some of the items of the scale. In addition, the researchers had to find culturally acceptable equivalents for some terms and idiomatic phrases. Notable among these include expressions such as "irritability", "feeling upbeat", and "nibbling on snacks", which had to be replaced by culturally acceptable expressions. During cognitive debriefing and clinician's review processes, the Malay translated version of WSWS was found to be easily comprehensible, clear, and appropriate for the smoking withdrawal symptoms intended to be measured. We applied a rigorous translation method to ensure conceptual equivalence and acceptability of WSWS in Malay prior to its utilization in research and clinical practice. However, to complete the cultural adaptation process, future psychometric validation is planned to be conducted among Malay speakers.

  2. 46 CFR 175.540 - Equivalents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... safety management system is in place on board a vessel. The Commandant will consider the size and corporate structure of a vessel's company when determining the acceptability of an equivalent system... require engineering evaluations and tests to demonstrate the equivalence of the substitute. (b) The...

  3. High School Equivalency Testing in Arizona. Forum: Responding to Changes in High School Equivalency Testing

    ERIC Educational Resources Information Center

    Hart, Sheryl

    2015-01-01

    For decades, the state of Arizona has used the General Educational Development (GED) Test to award the Arizona High School Equivalency (HSE) Diploma, as the GED Test was the only test available, recognized and accepted in the United States as the measure by which adults could demonstrate the educational attainment equivalent to high school…

  4. 10 CFR Appendix J1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Automatic and Semi-Automatic Clothes...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... clothes washer design can achieve spin speeds in the 500g range. When this matrix is repeated 3 times, a...) or an equivalent extractor with same basket design (i.e. diameter, length, volume, and hole... materially inaccurate comparative data, field testing may be appropriate for establishing an acceptable test...

  5. Comparison of manual and homogenizer methods for preparation of tick-derived stabilates of Theileria parva: equivalence testing using an in vitro titration model.

    PubMed

    Mbao, V; Speybroeck, N; Berkvens, D; Dolan, T; Dorny, P; Madder, M; Mulumba, M; Duchateau, L; Brandt, J; Marcotty, T

    2005-07-01

    Theileria parva sporozoite stabilates are used in the infection and treatment method of immunization, a widely accepted control option for East Coast fever in cattle. T. parva sporozoites are extracted from infected adult Rhipicephalus appendiculatus ticks either manually, using a pestle and a mortar, or by use of an electric homogenizer. A comparison of the two methods as a function of stabilate infectivity has never been documented. This study was designed to provide a quantitative comparison of stabilates produced by the two methods. The approach was to prepare batches of stabilate by both methods and then subject them to in vitro titration. Equivalence testing was then performed on the average effective doses (ED). The ratio of infective sporozoites yielded by the two methods was found to be 1.14 in favour of the manually ground stabilate with an upper limit of the 95% confidence interval equal to 1.3. We conclude that the choice of method rests more on costs, available infrastructure and standardization than on which method produces a richer sporozoite stabilate.

  6. Practical Methodology for the Inclusion of Nonlinear Slosh Damping in the Stability Analysis of Liquid-Propelled Space Vehicles

    NASA Technical Reports Server (NTRS)

    Ottander, John A.; Hall, Robert A.; Powers, J. F.

    2018-01-01

    A method is presented that allows for the prediction of the magnitude of limit cycles due to adverse control-slosh interaction in liquid propelled space vehicles using non-linear slosh damping. Such a method is an alternative to the industry practice of assuming linear damping and relying on: mechanical slosh baffles to achieve desired stability margins; accepting minimal slosh stability margins; or time domain non-linear analysis to accept time periods of poor stability. Sinusoidal input describing functional analysis is used to develop a relationship between the non-linear slosh damping and an equivalent linear damping at a given slosh amplitude. In addition, a more accurate analytical prediction of the danger zone for slosh mass locations in a vehicle under proportional and derivative attitude control is presented. This method is used in the control-slosh stability analysis of the NASA Space Launch System.

  7. Equivalent dynamic model of DEMES rotary joint

    NASA Astrophysics Data System (ADS)

    Zhao, Jianwen; Wang, Shu; Xing, Zhiguang; McCoul, David; Niu, Junyang; Huang, Bo; Liu, Liwu; Leng, Jinsong

    2016-07-01

    The dielectric elastomer minimum energy structure (DEMES) can realize large angular deformations by a small voltage-induced strain of the dielectric elastomer (DE), so it is a suitable candidate to make a rotary joint for a soft robot. Dynamic analysis is necessary for some applications, but the dynamic response of DEMESs is difficult to model because of the complicated morphology and viscoelasticity of the DE film. In this paper, a method composed of theoretical analysis and experimental measurement is presented to model the dynamic response of a DEMES rotary joint under an alternating voltage. Based on measurements of equivalent driving force and damping of the DEMES, the model can be derived. Some experiments were carried out to validate the equivalent dynamic model. The maximum angle error between model and experiment is greater than ten degrees, but it is acceptable to predict angular velocity of the DEMES, therefore, it can be applied in feedforward-feedback compound control.

  8. On Statistical Approaches for Demonstrating Analytical Similarity in the Presence of Correlation.

    PubMed

    Yang, Harry; Novick, Steven; Burdick, Richard K

    Analytical similarity is the foundation for demonstration of biosimilarity between a proposed product and a reference product. For this assessment, currently the U.S. Food and Drug Administration (FDA) recommends a tiered system in which quality attributes are categorized into three tiers commensurate with their risk and approaches of varying statistical rigor are subsequently used for the three-tier quality attributes. Key to the analyses of Tiers 1 and 2 quality attributes is the establishment of equivalence acceptance criterion and quality range. For particular licensure applications, the FDA has provided advice on statistical methods for demonstration of analytical similarity. For example, for Tier 1 assessment, an equivalence test can be used based on an equivalence margin of 1.5 σ R , where σ R is the reference product variability estimated by the sample standard deviation S R from a sample of reference lots. The quality range for demonstrating Tier 2 analytical similarity is of the form X̄ R ± K × σ R where the constant K is appropriately justified. To demonstrate Tier 2 analytical similarity, a large percentage (e.g., 90%) of test product must fall in the quality range. In this paper, through both theoretical derivations and simulations, we show that when the reference drug product lots are correlated, the sample standard deviation S R underestimates the true reference product variability σ R As a result, substituting S R for σ R in the Tier 1 equivalence acceptance criterion and the Tier 2 quality range inappropriately reduces the statistical power and the ability to declare analytical similarity. Also explored is the impact of correlation among drug product lots on Type I error rate and power. Three methods based on generalized pivotal quantities are introduced, and their performance is compared against a two-one-sided tests (TOST) approach. Finally, strategies to mitigate risk of correlation among the reference products lots are discussed. A biosimilar is a generic version of the original biological drug product. A key component of a biosimilar development is the demonstration of analytical similarity between the biosimilar and the reference product. Such demonstration relies on application of statistical methods to establish a similarity margin and appropriate test for equivalence between the two products. This paper discusses statistical issues with demonstration of analytical similarity and provides alternate approaches to potentially mitigate these problems. © PDA, Inc. 2016.

  9. Statistics of equivalent width data and new oscillator strengths for Si II, Fe II, and Mn II. [in interstellar medium

    NASA Technical Reports Server (NTRS)

    Van Buren, Dave

    1986-01-01

    Equivalent width data from Copernicus and IUE appear to have an exponential, rather than a Gaussian distribution of errors. This is probably because there is one dominant source of error: the assignment of the background continuum shape. The maximum likelihood method of parameter estimation is presented for the case of exponential statistics, in enough generality for application to many problems. The method is applied to global fitting of Si II, Fe II, and Mn II oscillator strengths and interstellar gas parameters along many lines of sight. The new values agree in general with previous determinations but are usually much more tightly constrained. Finally, it is shown that care must be taken in deriving acceptable regions of parameter space because the probability contours are not generally ellipses whose axes are parallel to the coordinate axes.

  10. Cross-cultural measurements of psychological well-being: the psychometric equivalence of Cantonese, Vietnamese, and Laotian translations of the Affect Balance Scale.

    PubMed Central

    Devins, G M; Beiser, M; Dion, R; Pelletier, L G; Edwards, R G

    1997-01-01

    OBJECTIVES: This paper evaluates the cultural equivalence of Cantonese, Vietnamese, and Laotian translations of the Affect Balance Scale. METHODS: The scale was completed by 399 Vietnamese, 193 Laotian, 756 Cantonese, and 319 English speakers who were participants in the Clarke Institute-University of Toronto Refugee Resettlement Project (n = 1667). RESULTS: Confirmatory factor analyses indicated a good fit between the hypothesized two-factor model (separate factors for positive and negative affect) across the original English-language version and each of the Asian-language translations. Factorial invariance (numbers and patterns of factor loadings) was evident across all versions of the scale. No evidence of item bias was detected by mixed Language x Item analyses of variance. Acceptable reliability was observed; coefficient alphas ranged from .62 to .72 for positive affect and from .62 to .70 for negative affect items. CONCLUSIONS: These findings substantiate the cultural equivalence of the three translations of the scale for population health research. Important future research directions made possible by the availability of culturally equivalent instruments are discussed. PMID:9184508

  11. Determination and evaluation of acceptable force limits in single-digit tasks.

    PubMed

    Nussbaum, Maury A; Johnson, Hope

    2002-01-01

    Acceptable limits derived from psychophysical methodologies have been proposed, measured, and employed in a range of applications. There is little existing work, however, on such limits for single-digit exertions and relatively limited evidence on several fundamental issues related to data collection and processing of a sequence of self-regulated exertion levels. An experimental study was conducted using 14 male and 10 female participants (age range 18-31 years) from whom maximal voluntary exertions and maximal acceptable limits (MALs) were obtained using the index finger and thumb. Moderate to high levels of consistency were found for both measures between sessions separated by one day. Single MAL values, determined from a time series of exertions, were equivalent across three divergent processing methods and between values obtained from 5- and 25-min samples. A critical interpretation of these and earlier results supports continued use of acceptable limits but also suggests that they should be used with some caution and not equated with safe limits. This research can be applied toward future development of exertion limits based on perceived acceptability.

  12. Development of a nonlinear vortex method

    NASA Technical Reports Server (NTRS)

    Kandil, O. A.

    1982-01-01

    Steady and unsteady Nonliner Hybrid Vortex (NHV) method, for low aspect ratio wings at large angles of attack, is developed. The method uses vortex panels with first-order vorticity distribution (equivalent to second-order doublet distribution) to calculate the induced velocity in the near field using closed form expressions. In the far field, the distributed vorticity is reduced to concentrated vortex lines and the simpler Biot-Savart's law is employed. The method is applied to rectangular wings in steady and unsteady flows without any restriction on the order of magnitude of the disturbances in the flow field. The numerical results show that the method accurately predicts the distributed aerodynamic loads and that it is of acceptable computational efficiency.

  13. 40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM 2.5 Class II Equivalent Samplers

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... II Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel... Results: 95% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km... Class II Equivalent Samplers F Table F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL...

  14. 40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM2.5 Class II Equivalent Samplers

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel Evaluation...% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr and 24... Class II Equivalent Samplers F Table F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL...

  15. 40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM 2.5 Class II Equivalent Samplers

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... II Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel... Results: 95% ≤Rc ≤105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr... Class II Equivalent Samplers F Table F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL...

  16. 76 FR 36961 - Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... limited to the equivalent displacement of a knot \\3/8\\ of an inch deep on one face and the maximum round.../2\\ the equivalent displacement of a round knot permitted at that location, provided that the depth...

  17. Orthodontic soft-tissue parameters: a comparison of cone-beam computed tomography and the 3dMD imaging system.

    PubMed

    Metzger, Tasha E; Kula, Katherine S; Eckert, George J; Ghoneima, Ahmed A

    2013-11-01

    Orthodontists rely heavily on soft-tissue analysis to determine facial esthetics and treatment stability. The aim of this retrospective study was to determine the equivalence of soft-tissue measurements between the 3dMD imaging system (3dMD, Atlanta, Ga) and the segmented skin surface images derived from cone-beam computed tomography. Seventy preexisting 3dMD facial photographs and cone-beam computed tomography scans taken within minutes of each other for the same subjects were registered in 3 dimensions and superimposed using Vultus (3dMD) software. After reliability studies, 28 soft-tissue measurements were recorded with both imaging modalities and compared to analyze their equivalence. Intraclass correlation coefficients and Bland-Altman plots were used to assess interexaminer and intraexaminer repeatability and agreement. Summary statistics were calculated for all measurements. To demonstrate equivalence of the 2 methods, the difference needed a 95% confidence interval contained entirely within the equivalence limits defined by the repeatability results. Statistically significant differences were reported for the vermilion height, mouth width, total facial width, mouth symmetry, soft-tissue lip thickness, and eye symmetry. There are areas of nonequivalence between the 2 imaging methods; however, the differences are clinically acceptable from the orthodontic point of view. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  18. Detection of coliform bacteria and Escherichia coli by multiplex polymerase chain reaction: comparison with defined substrate and plating methods for water quality monitoring.

    PubMed Central

    Bej, A K; McCarty, S C; Atlas, R M

    1991-01-01

    Multiplex polymerase chain reaction (PCR) and gene probe detection of target lacZ and uidA genes were used to detect total coliform bacteria and Escherichia coli, respectively, for determining water quality. In tests of environmental water samples, the lacZ PCR method gave results statistically equivalent to those of the plate count and defined substrate methods accepted by the U.S. Environmental Protection Agency for water quality monitoring and the uidA PCR method was more sensitive than 4-methylumbelliferyl-beta-D-glucuronide-based defined substrate tests for specific detection of E. coli. Images PMID:1768116

  19. Linguistic validation of the Sexual Inhibition and Sexual Excitation Scales (SIS/SES) translated into five South Asian languages: Oxford Sexual Dysfunction Study (OSDS).

    PubMed

    Malavige, Lasantha S; Wijesekara, Pabasi N; Jayaratne, Shanthilal D; Kathriarachchi, Samudra T; Ranasinghe, Priyanga; Sivayogan, Sivagurunathan; Levy, Jonathan C; Bancroft, John

    2013-12-20

    The purpose of the linguistic validation of the Sexual Inhibition and Sexual Excitation Scales (SIS/SES) was to produce translated versions in five South Asian languages (Hindi, Urdu, Panjabi, Tamil and Sinhalese) that was "conceptually equivalent" to the original U.S. English version, for use in the Oxford Sexual Dysfunction Study (OSDS). Initially an expert committee was appointed to carry out the task of linguistic validation. This committee included the principal investigator, project coordinator and the associate project manager of the OSDS and a language consultant for each of the South Asian languages. The process of translation and validation was conducted in the following order; a) production of two independent forward translations, b) comparison and reconciliation of the translations, c) backward translation of the first reconciled version, d) comparison of the original version of SIS/SES and the backward version leading to the production of the second reconciled version and e) pilot testing and finalization. Several linguistic and conceptual issues arose during the process of translating the instrument. Problems were also encountered with cultural differences in acceptability of certain concepts, and with semantic difficulties in finding an appropriate translation. In addition, the researchers had to find culturally acceptable equivalents for some terms and idiomatic phrases. The problems encountered in pilot testing, during cognitive debriefing and clinicians' review, were categorized as cultural or conceptual/semantic. Cultural issues describe the acceptability of using certain terms and phrases in a particular socio-cultural milieu. The conceptual and semantic difficulties reflect the inability to deliver the idea/meaning of a source statement in the target language. The current paper describes a selection of these issues. We applied a rigorous translation method to ensure conceptual equivalence and acceptability of SIS/SES in the five different South Asian languages prior to its utilization in the OSDS. However, to complete the cultural adaptation process, future psychometric validation of the translated versions is required among the different language speakers.

  20. Determining Gram-Equivalent Mass by Evolution of Hydrogen: An Improved Experiment.

    ERIC Educational Resources Information Center

    Hopper, Marlon E.

    1993-01-01

    Describes an experiment where the gram-equivalent mass of an unknown metal is determined by reacting the metal with dilute hydrochloric acid and collecting the evolved gas over water. This simple, reliable experiment routinely gives results within 1% of the accepted value. (PR)

  1. Towards standardized assessment of endoscope optical performance: geometric distortion

    NASA Astrophysics Data System (ADS)

    Wang, Quanzeng; Desai, Viraj N.; Ngo, Ying Z.; Cheng, Wei-Chung; Pfefer, Joshua

    2013-12-01

    Technological advances in endoscopes, such as capsule, ultrathin and disposable devices, promise significant improvements in safety, clinical effectiveness and patient acceptance. Unfortunately, the industry lacks test methods for preclinical evaluation of key optical performance characteristics (OPCs) of endoscopic devices that are quantitative, objective and well-validated. As a result, it is difficult for researchers and developers to compare image quality and evaluate equivalence to, or improvement upon, prior technologies. While endoscope OPCs include resolution, field of view, and depth of field, among others, our focus in this paper is geometric image distortion. We reviewed specific test methods for distortion and then developed an objective, quantitative test method based on well-defined experimental and data processing steps to evaluate radial distortion in the full field of view of an endoscopic imaging system. Our measurements and analyses showed that a second-degree polynomial equation could well describe the radial distortion curve of a traditional endoscope. The distortion evaluation method was effective for correcting the image and can be used to explain other widely accepted evaluation methods such as picture height distortion. Development of consensus standards based on promising test methods for image quality assessment, such as the method studied here, will facilitate clinical implementation of innovative endoscopic devices.

  2. An equivalence study of interview platform: Does videoconference technology impact medical school acceptance rates of different groups?

    PubMed

    Ballejos, Marlene P; Oglesbee, Scott; Hettema, Jennifer; Sapien, Robert

    2018-02-14

    Web-based interviewing may be an effective element of a medical school's larger approach to promotion of holistic review, as recommended by the Association of American Medical Colleges, by facilitating the feasibility of including rural and community physicians in the interview process. Only 10% of medical schools offer videoconference interviews to applicants and little is known about the impact of this interview modality on the admissions process. This study investigated the impact of overall acceptance rates using videoconference interviews and face-to-face interviews in the medical school selection process using an equivalence trial design. The University of New Mexico School of Medicine integrated a videoconferencing interview option for community and rural physician interviewers in a pseudo-random fashion during the 2014-2016 admissions cycles. Logistic regression was conducted to examine whether videoconference interviews impacted acceptance rates or the characteristics of accepted students. Demographic, admissions and diversity factors were analyzed that included applicant age, MCAT score, cumulative GPA, gender, underrepresented in medicine, socioeconomic status and geographic residency. Data from 752 interviews were analyzed. Adjusted rates of acceptance for face-to-face (37.0%; 95% CI 28.2, 46.7%) and videoconference (36.1%; 95% CI 17.8, 59.5%) interviews were within an a priori ± 5% margin of equivalence. Both interview conditions yielded highly diverse groups of admitted students. Having a higher medical college admission test score, grade point average, and self-identifying as disadvantaged increased odds of admission in both interview modalities. Integration of the videoconference interview did not impact the overall acceptance of a highly diverse and qualified group of applicants, and allowed rural and community physicians to participate in the medical school interview process as well as allowed campus faculty and medical student committee members to interview remotely.

  3. UPDATE ON PEC ACTIVITIES INCLUDING NEW EVALUATION CRITERIA, THE APPLICATION COMPLETENESS CHECKLIST, AND STATUS OF THE WEBSITE DEVELOPMENT

    EPA Science Inventory

    US EPA's Pathogen Equivalency Committee (PEC) has updated the evaluation criteria it uses to make recommendations of equivalency (to processes acceptable under 40CFR503) on innovative or alternative sludge pathogen reduction processes. These criteria will be presented along with ...

  4. Leicester Cough Questionnaire: translation to Portuguese and cross-cultural adaptation for use in Brazil*

    PubMed Central

    Felisbino, Manuela Brisot; Steidle, Leila John Marques; Gonçalves-Tavares, Michelle; Pizzichini, Marcia Margaret Menezes; Pizzichini, Emilio

    2014-01-01

    Objective: To translate the Leicester Cough Questionnaire (LCQ) to Portuguese and adapt it for use in Brazil. Methods: Cross-cultural adaptation of a quality of life questionnaire requires a translated version that is conceptually equivalent to the original version and culturally acceptable in the target country. The protocol used consisted of the translation of the LCQ to Portuguese by three Brazilian translators who were fluent in English and its back-translation to English by another translator who was a native speaker of English and fluent in Portuguese. The back-translated version was evaluated by one of the authors of the original questionnaire in order to verify its equivalence. Later in the process, a provisional Portuguese-language version was thoroughly reviewed by an expert committee. In 10 patients with chronic cough, cognitive debriefing was carried out in order to test the understandability, clarity, and acceptability of the translated questionnaire in the target population. On that basis, the final Portuguese-language version of the LCQ was produced and approved by the committee. Results: Few items were questioned by the source author and revised by the committee of experts. During the cognitive debriefing phase, the Portuguese-language version of the LCQ proved to be well accepted and understood by all of the respondents, which demonstrates the robustness of the process of translation and cross-cultural adaptation. Conclusions: The final version of the LCQ adapted for use in Brazil was found to be easy to understand and easily applied. PMID:25029643

  5. Neutron dose equivalent meter

    DOEpatents

    Olsher, Richard H.; Hsu, Hsiao-Hua; Casson, William H.; Vasilik, Dennis G.; Kleck, Jeffrey H.; Beverding, Anthony

    1996-01-01

    A neutron dose equivalent detector for measuring neutron dose capable of accurately responding to neutron energies according to published fluence to dose curves. The neutron dose equivalent meter has an inner sphere of polyethylene, with a middle shell overlying the inner sphere, the middle shell comprising RTV.RTM. silicone (organosiloxane) loaded with boron. An outer shell overlies the middle shell and comprises polyethylene loaded with tungsten. The neutron dose equivalent meter defines a channel through the outer shell, the middle shell, and the inner sphere for accepting a neutron counter tube. The outer shell is loaded with tungsten to provide neutron generation, increasing the neutron dose equivalent meter's response sensitivity above 8 MeV.

  6. An Equivalent Fracture Modeling Method

    NASA Astrophysics Data System (ADS)

    Li, Shaohua; Zhang, Shujuan; Yu, Gaoming; Xu, Aiyun

    2017-12-01

    3D fracture network model is built based on discrete fracture surfaces, which are simulated based on fracture length, dip, aperture, height and so on. The interesting area of Wumishan Formation of Renqiu buried hill reservoir is about 57 square kilometer and the thickness of target strata is more than 2000 meters. In addition with great fracture density, the fracture simulation and upscaling of discrete fracture network model of Wumishan Formation are very intense computing. In order to solve this problem, a method of equivalent fracture modeling is proposed. First of all, taking the fracture interpretation data obtained from imaging logging and conventional logging as the basic data, establish the reservoir level model, and then under the constraint of reservoir level model, take fault distance analysis model as the second variable, establish fracture density model by Sequential Gaussian Simulation method. Increasing the width, height and length of fracture, at the same time decreasing its density in order to keep the similar porosity and permeability after upscaling discrete fracture network model. In this way, the fracture model of whole interesting area can be built within an accepted time.

  7. The Farnsworth Flashlight is not equivalent to the Farnsworth Lantern.

    PubMed

    Dain, Stephen

    2012-02-01

    The Farnsworth Lantern has been accepted in many occupational applications. Modern instruments purporting to be equivalent were inevitable given the ubiquity of its use. The OPTEC900® (Stereo Optical) has been validated and adopted as an acceptable substitute, although the fail rate is slightly higher. The Farnsworth Flashlight (Gulden Ophthalmics) has been marketed without validation. The color and luminous intensities of the three lanterns' stimuli were measured using a Topcon SR-3 telespectroradiometer and compared with Farnsworth's recommendations. The OPTEC900® chromaticities comply with Farnsworth's recommendations, but the luminous intensities are rather different. The Farnsworth Flashlight differs from the Farnsworth Lantern in both chromaticity and luminous intensities. A cheap and portable equivalent to the Farnsworth Lantern is a highly attractive product. However, the Farnsworth Flashlight is significantly different in construction from the Farnsworth Lantern. © 2012 Optical Society of America

  8. Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

    PubMed Central

    Akmaz, Hazel Ekin; Uyar, Meltem; Kuzeyli Yıldırım, Yasemin; Akın Korhan, Esra

    2018-01-01

    Background: Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. Aims: To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Study Design: Methodological and cross sectional study. Methods: A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. Results: The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. Conclusion: The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance of chronic pain. PMID:29843496

  9. A Risk-Based Approach to Variable Load Configuration Validation in Steam Sterilization: Application of PDA Technical Report 1 Load Equivalence Topic.

    PubMed

    Pavell, Anthony; Hughes, Keith A

    2010-01-01

    This article describes a method for achieving the load equivalence model, described in Parenteral Drug Association Technical Report 1, using a mass-based approach. The item and load bracketing approach allows for mixed equipment load size variation for operational flexibility along with decreased time to introduce new items to the operation. The article discusses the utilization of approximately 67 items/components (Table IV) identified for routine sterilization with varying quantities required weekly. The items were assessed for worst-case identification using four temperature-related criteria. The criteria were used to provide a data-based identification of worst-case items, and/or item equivalence, to carry forward into cycle validation using a variable load pattern. The mass approach to maximum load determination was used to bracket routine production use and allows for variable loading patterns. The result of the item mapping and load bracketing data is "a proven acceptable range" of sterilizing conditions including loading configuration and location. The application of these approaches, while initially more time/test-intensive than alternate approaches, provides a method of cycle validation with long-term benefit of ease of ongoing qualification, minimizing time and requirements for new equipment qualification for similar loads/use, and for rapid and rigorous assessment of new items for sterilization.

  10. Frequency of Input and L2 Collocational Processing: A Comparison of Congruent and Incongruent Collocations

    ERIC Educational Resources Information Center

    Wolter, Brent; Gyllstad, Henrik

    2013-01-01

    This study investigated the influence of frequency effects on the processing of congruent (i.e., having an equivalent first language [L1] construction) collocations and incongruent (i.e., not having an equivalent L1 construction) collocations in a second language (L2). An acceptability judgment task was administered to native and advanced…

  11. 42 CFR 60.5 - Who is an eligible student borrower?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... EDUCATION ASSISTANCE LOAN PROGRAM The Borrower § 60.5 Who is an eligible student borrower? To receive a HEAL... accepted for enrollment at a HEAL school in a course of study that leads to one of the following degrees... Medicine or equivalent degree Bachelor or Master of Science in Pharmacy or equivalent degree Graduate or...

  12. 42 CFR 60.5 - Who is an eligible student borrower?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... EDUCATION ASSISTANCE LOAN PROGRAM The Borrower § 60.5 Who is an eligible student borrower? To receive a HEAL... accepted for enrollment at a HEAL school in a course of study that leads to one of the following degrees... Medicine or equivalent degree Bachelor or Master of Science in Pharmacy or equivalent degree Graduate or...

  13. SU-D-BRC-04: Development of Proton Tissue Equivalent Materials for Calibration and Dosimetry Studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olguin, E; Flampouri, S; Lipnharski, I

    Purpose: To develop new proton tissue equivalent materials (PTEM), urethane and fiberglass based, for proton therapy calibration and dosimetry studies. Existing tissue equivalent plastics are applicable only for x-rays because they focus on matching mass attenuation coefficients. This study aims to create new plastics that match mass stopping powers for proton therapy applications instead. Methods: New PTEMs were constructed using urethane and fiberglass resin materials for soft, fat, bone, and lung tissue. The stoichiometric analysis method was first used to determine the elemental composition of each unknown constituent. New initial formulae were then developed for each of the 4 PTEMsmore » using the new elemental compositions and various additives. Samples of each plastic were then created and exposed to a well defined proton beam at the UF Health Proton Therapy Institute (UFHPTI) to validate its mass stopping power. Results: The stoichiometric analysis method revealed the elemental composition of the 3 components used in creating the PTEMs. These urethane and fiberglass based resins were combined with additives such as calcium carbonate, aluminum hydroxide, and phenolic micro spheres to achieve the desired mass stopping powers and densities. Validation at the UFHPTI revealed adjustments had to be made to the formulae, but the plastics eventually had the desired properties after a few iterations. The mass stopping power, density, and Hounsfield Unit of each of the 4 PTEMs were within acceptable tolerances. Conclusion: Four proton tissue equivalent plastics were developed: soft, fat, bone, and lung tissue. These plastics match each of the corresponding tissue’s mass stopping power, density, and Hounsfield Unit, meaning they are truly tissue equivalent for proton therapy applications. They can now be used to calibrate proton therapy treatment planning systems, improve range uncertainties, validate proton therapy Monte Carlo simulations, and assess in-field and out-of-field organ doses.« less

  14. Patient satisfaction and acceptance of spherical equivalent spectacles correction wear in rural India.

    PubMed

    Reddy, B Sandeep; Das, Taraprasad; Mirdha, Ghansyam S; Reddy, Nagavardhan

    2017-08-01

    The aim of this study was to explore the possibilities of acceptance of a ready-to-dispense spherical equivalent (SE) of spherocylindrical (SC) correction spectacles in rural India. Snellen visual acuity with SE power of refracted SC lenses was prospectively collected from all individuals visiting vision centers in Phase 1 (vision correction accuracy) of the study conducted in two South Indian districts. The satisfaction level was recorded by asking one standard question. The SE spectacles were dispensed in vision centers of one district in Phase 2 (SE acceptance) with a suggestion to return, if unsatisfied, for free exchange of spectacles within a month of dispensing. In Phase 1, 929 of 3529 patients were refracted and it was found that 320 patients and one eye of one patient (641 eyes) had astigmatism. The average age was 41 (±16; range: 7-84) years. There was no reduction of visual acuity in SE of 0.25 Dcyl (100% satisfaction) and progressive decrease in satisfaction to 43%, 26%, and 19% with SE correction of 0.50, 0.75, and 1.00 Dcyl, respectively. In Phase 2, 988 of 6168 patients needed refraction and 240 had astigmatism. A total of 103 patients (206 eyes) accepted SE equivalent spectacles. No client returned for the free exchange of spectacles. Dispensing SE power up to 1 Dcyl in ready - made spectacles could be considered in remote rural populations in resource-poor economic conditions.

  15. Pharmaceutical and pharmacokinetic characterization of a novel sublingual buprenorphine/naloxone tablet formulation in healthy volunteers

    PubMed Central

    Fischer, Andreas; Hjelmström, Peter

    2015-01-01

    Abstract Context Bitter taste, as well as dissolve time, presents a significant challenge for the acceptability of formulations for oral transmucosal drug delivery. Objective To characterize a novel sublingual tablet formulation of buprenorphine/naloxone with regards to pharmacokinetics, dissolve time and formulation acceptability. Methods Dry mixing techniques were employed to produce a small and fast dissolving buprenorphine/naloxone sublingual tablet formulation, OX219 (Zubsolv®), using sucralose and menthol as sweetener and flavor to mask the bitter taste of the active ingredients. Two cross-over studies were performed in healthy volunteers to evaluate pharmacokinetics, dissolve time and acceptability of OX219 5.7/1.4 mg tablets compared to the commercially available buprenorphine/naloxone formulations Suboxone® tablets and films (8/2 mg). Results Buprenorphine exposure was equivalent in OX219 and Suboxone tablets. Sublingual dissolve times were significantly shorter for OX219 than for Suboxone tablets and were similar to Suboxone films. The OX219 formulation received significantly higher subjective ratings for taste and overall acceptability than both Suboxone formulations. OX219 was preferred over Suboxone tablet and film formulations by 77.4% and 88.9% of subjects, respectively. Conclusions A sublingual tablet formulation with an improved acceptability has been successfully developed. PMID:24099551

  16. Legionella detection by culture and qPCR: Comparing apples and oranges.

    PubMed

    Whiley, Harriet; Taylor, Michael

    2016-01-01

    Legionella spp. are the causative agent of Legionnaire's disease and an opportunistic pathogen of significant public health concern. Identification and quantification from environmental sources is crucial for identifying outbreak origins and providing sufficient information for risk assessment and disease prevention. Currently there are a range of methods for Legionella spp. quantification from environmental sources, but the two most widely used and accepted are culture and real-time polymerase chain reaction (qPCR). This paper provides a review of these two methods and outlines their advantages and limitations. Studies from the last 10 years which have concurrently used culture and qPCR to quantify Legionella spp. from environmental sources have been compiled. 26/28 studies detected Legionella at a higher rate using qPCR compared to culture, whilst only one study detected equivalent levels of Legionella spp. using both qPCR and culture. Aggregating the environmental samples from all 28 studies, 2856/3967 (72%) tested positive for the presence of Legionella spp. using qPCR and 1331/3967 (34%) using culture. The lack of correlation between methods highlights the need to develop an acceptable standardized method for quantification that is sufficient for risk assessment and management of this human pathogen.

  17. Identifying a maximum tolerated contour in two-dimensional dose-finding

    PubMed Central

    Wages, Nolan A.

    2016-01-01

    The majority of Phase I methods for multi-agent trials have focused on identifying a single maximum tolerated dose combination (MTDC) among those being investigated. Some published methods in the area have been based on the notion that there is no unique MTDC, and that the set of dose combinations with acceptable toxicity forms an equivalence contour in two dimensions. Therefore, it may be of interest to find multiple MTDC's for further testing for efficacy in a Phase II setting. In this paper, we present a new dose-finding method that extends the continual reassessment method to account for the location of multiple MTDC's. Operating characteristics are demonstrated through simulation studies, and are compared to existing methodology. Some brief discussion of implementation and available software is also provided. PMID:26910586

  18. Standard back-translation procedures may not capture proper emotion concepts: a case study of Chinese disgust terms.

    PubMed

    Barger, Brian; Nabi, Robin; Hong, Liang Yu

    2010-10-01

    We present data questioning the adequacy of standard back-translation procedures for investigating emotion states across cultures (Brislin, 1970). Our data indicate that the Chinese back-translation of the term disgust has led cross-cultural researchers to accept terms whose themes, goals, and motivations are more akin to the English term anger. Evidence is presented showing that, compared with the standard back-translation method, a more painstaking interview method found a better translational Chinese equivalent for the English term disgust. Implications for the use of back-translation in cross-cultural research are considered. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

  19. Anterior insula signals inequalities in a modified Ultimatum Game.

    PubMed

    Cheng, Xuemei; Zheng, Li; Li, Lin; Zheng, Yijie; Guo, Xiuyan; Yang, Guang

    2017-04-21

    Studies employing the Ultimatum Game (UG) which involves two parties (i.e., proposers and responders) splitting some money have suggested the role that anterior insula (AI) plays in detecting fairness norm violation, i.e., violation of the responder's expectation of receiving equal splits from the proposer. In this study, we explored how AI would respond when there existed simultaneously another expectation of being treated equivalently as others. Participants acted as responders and would be informed about both the offers they received and the average amount of money the same proposer offered to others. Hence we introduced different conditions where participants were treated equivalently or not equivalently as other responders in UG. Participants could decide to accept or reject the offer with acceptance leading to the suggested split and rejection leaving both parties nothing. Behavioral results showed that participants rejected more unfair offers and reacted more slowly during acceptance (vs. rejection) of offers when they were offered less than others. At the neural level, stronger AI activation was observed when participants received unfair relative to fair offers, as well as when they received unequal relative to equal offers. Moreover, dorsomedial prefrontal cortex/dorsal anterior cingulate cortex (dmPFC/dACC) exhibited greater activity during receiving unequal (vs. equal) offers and during acceptance (vs. rejection) of offers which were less than others'. Taken together, the present study demonstrated that the treatment of others modulated both behavioral responses to unfairness and neural correlates of the fairness-related decision-making process, and that AI played a general role in detecting norm violations. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

  20. Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

    PubMed

    Akmaz, Hazel Ekin; Uyar, Meltem; Kuzeyli Yıldırım, Yasemin; Akın Korhan, Esra

    2018-05-29

    Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Methodological and cross sectional study. A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance of chronic pain.

  1. 42 CFR 136.321 - Eligibility.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... successfully completed high school education or high school equivalency; (c) Have demonstrated to the... professions school; (d) Be accepted for enrollment in or be enrolled in any compensatory preprofessional...

  2. 42 CFR 136.321 - Eligibility.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... successfully completed high school education or high school equivalency; (c) Have demonstrated to the... professions school; (d) Be accepted for enrollment in or be enrolled in any compensatory preprofessional...

  3. 42 CFR 136.321 - Eligibility.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... successfully completed high school education or high school equivalency; (c) Have demonstrated to the... professions school; (d) Be accepted for enrollment in or be enrolled in any compensatory preprofessional...

  4. 42 CFR 136.321 - Eligibility.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... successfully completed high school education or high school equivalency; (c) Have demonstrated to the... professions school; (d) Be accepted for enrollment in or be enrolled in any compensatory preprofessional...

  5. 42 CFR 136.321 - Eligibility.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... successfully completed high school education or high school equivalency; (c) Have demonstrated to the... professions school; (d) Be accepted for enrollment in or be enrolled in any compensatory preprofessional...

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lippincott, W. H.; McKinsey, D. N.; Nikkel, J. A.

    Using a single-phase liquid argon detector with a signal yield of 4.85 photoelectrons per keV of electronic-equivalent recoil energy (keVee), we measure the scintillation time dependence of both electronic and nuclear recoils in liquid argon down to 5 keVee. We develop two methods of pulse shape discrimination to distinguish between electronic and nuclear recoils. Using one of these methods, we measure a background- and statistics-limited level of electronic recoil contamination to be 7.6x10{sup -7} between 52 and 110 keV of nuclear recoil energy (keVr) for a nuclear recoil acceptance of 50% with no nuclear recoil-like events above 62 keVr. Finally,more » we develop a maximum likelihood method of pulse shape discrimination based on the measured scintillation time dependence.« less

  7. Estimating structure quality trends in the Protein Data Bank by equivalent resolution.

    PubMed

    Bagaria, Anurag; Jaravine, Victor; Güntert, Peter

    2013-10-01

    The quality of protein structures obtained by different experimental and ab-initio calculation methods varies considerably. The methods have been evolving over time by improving both experimental designs and computational techniques, and since the primary aim of these developments is the procurement of reliable and high-quality data, better techniques resulted on average in an evolution toward higher quality structures in the Protein Data Bank (PDB). Each method leaves a specific quantitative and qualitative "trace" in the PDB entry. Certain information relevant to one method (e.g. dynamics for NMR) may be lacking for another method. Furthermore, some standard measures of quality for one method cannot be calculated for other experimental methods, e.g. crystal resolution or NMR bundle RMSD. Consequently, structures are classified in the PDB by the method used. Here we introduce a method to estimate a measure of equivalent X-ray resolution (e-resolution), expressed in units of Å, to assess the quality of any type of monomeric, single-chain protein structure, irrespective of the experimental structure determination method. We showed and compared the trends in the quality of structures in the Protein Data Bank over the last two decades for five different experimental techniques, excluding theoretical structure predictions. We observed that as new methods are introduced, they undergo a rapid method development evolution: within several years the e-resolution score becomes similar for structures obtained from the five methods and they improve from initially poor performance to acceptable quality, comparable with previously established methods, the performance of which is essentially stable. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Evaluation of a web-based family medicine case library for self-directed learning in a third-year clerkship.

    PubMed

    Morrow, Jay B; Sepdham, Dan; Snell, Laura; Lindeman, Carolyn; Dobbie, Alison

    2010-01-01

    Web-based cases are well accepted by medical students and enable faculty to deliver equivalent educational experiences to all students. A 2009 literature search revealed no study investigating student use patterns of Web-based case libraries for self-directed learning. We investigated third-year students' use of a Web-based case program for self-directed learning in a family medicine clerkship. We analyzed Design A Case usage patterns of 210 medical students during academic year 2008--2009. We compared board score differences between these students and those from the previous 5 years who did not use Design A Case. We analyzed data from a 13-item survey, administered to a subgroup of 85 students, about the strengths, weaknesses, and acceptability of the program. Students completed, on average, four cases, which was beyond the requirement of three. They reported that the content was highly relevant to cases they saw in clinic. Almost 75% preferred the self-directed Web-based learning over didactics, and most (64%) felt they learned more electronically. Use of the cases was associated with equivalent Board scores versus didactic lectures. In our setting, self-directed learning using a Web-based case program was highly acceptable to students. Web-based cases may provide an option for family medicine educators who wish to deliver equivalent educational experiences across sites.

  9. 46 CFR 164.023-11 - Acceptance tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... identification tests are conducted: (1) The average length/weight ratio of the thread in meters per kilogram... analysis, thermogravimetric analysis, differential scanning calorimeter, or other equivalent means adequate...

  10. Improved reliability of pH measurements.

    PubMed

    Spitzer, Petra; Werner, Barbara

    2002-11-01

    Measurements of pH are performed on a large scale at laboratory level, and in industry. To meet the quality-control requirements and other technical specifications there is a need for traceability in measurement results. The prerequisite for the international acceptance of analytical data is reliability. To measure means to compare. Comparability entails use of recognised references to which the standard buffer solutions used for calibration of pH meter-electrode assemblies can be traced. The new recommendation on the measurement of pH recently published as a provisional document by the International Union on Pure and Applied Chemistry (IUPAC) enables traceability for measured pH values to a conventional reference frame which is recognised world-wide. The primary method for pH will be described. If analytical data are to be accepted internationally it is necessary to demonstrate the equivalence of the national traceability structures, including national measurement standards. For the first time key comparisons for pH have been performed by the Consultative Committee for Amount of Substance (CCQM, set up by the International Bureau of Weights and Measures, BIPM) to assess the equivalence of the national measurement procedures used to determine the pH of primary standard buffer solutions. The results of the first key comparison on pH CCQM-K9, and other international initiatives to improve the consistency of the results of measurement for pH, are reported.

  11. Aqueous Cleaning and Validation for Space Shuttle Propulsion Hardware at the White Sands Test Facility

    NASA Technical Reports Server (NTRS)

    Hornung, Steven D.; Biesinger, Paul; Kirsch, Mike; Beeson, Harold; Leuders, Kathy

    1999-01-01

    The NASA White Sands Test Facility (WSTF) has developed an entirely aqueous final cleaning and verification process to replace the current chlorofluorocarbon (CFC) 113 based process. This process has been accepted for final cleaning and cleanliness verification of WSTF ground support equipment. The aqueous process relies on ultrapure water at 50 C (323 K) and ultrasonic agitation for removal of organic compounds and particulate. The cleanliness is verified bv determining the total organic carbon (TOC) content and filtration with particulate counting. The effectiveness of the aqueous methods for detecting hydrocarbon contamination and particulate was compared to the accepted CFC 113 sampling procedures. Testing with known contaminants, such as hydraulic fluid and cutting and lubricating oils, to establish a correlation between aqueous TOC and CFC 113 nonvolatile residue (NVR) was performed. Particulate sampling on cleaned batches of hardware that were randomly separated and sampled by the two methods was performed. This paper presents the approach and results, and discusses the issues in establishing the equivalence of aqueous sampling to CFC 113 sampling, while describing the approach for implementing aqueous techniques on Space Shuttle Propulsion hardware.

  12. 40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM2.5 Class II Equivalent Samplers

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... specified in the post-loading evaluation test (§ 53.62, § 53.63, or § 53.64). § 53.66 Volatility Test... Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel Evaluation...: 95% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr...

  13. 40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM2.5 Class II Equivalent Samplers

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... specified in the post-loading evaluation test (§ 53.62, § 53.63, or § 53.64). § 53.66 Volatility Test... Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel Evaluation...: 95% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr...

  14. An Analysis of Measured Pressure Signatures From Two Theory-Validation Low-Boom Models

    NASA Technical Reports Server (NTRS)

    Mack, Robert J.

    2003-01-01

    Two wing/fuselage/nacelle/fin concepts were designed to check the validity and the applicability of sonic-boom minimization theory, sonic-boom analysis methods, and low-boom design methodology in use at the end of the 1980is. Models of these concepts were built, and the pressure signatures they generated were measured in the wind-tunnel. The results of these measurements lead to three conclusions: (1) the existing methods could adequately predict sonic-boom characteristics of wing/fuselage/fin(s) configurations if the equivalent area distributions of each component were smooth and continuous; (2) these methods needed revision so the engine-nacelle volume and the nacelle-wing interference lift disturbances could be accurately predicted; and (3) current nacelle-configuration integration methods had to be updated. With these changes in place, the existing sonic-boom analysis and minimization methods could be effectively applied to supersonic-cruise concepts for acceptable/tolerable sonic-boom overpressures during cruise.

  15. 49 CFR 41.120 - Acceptable model codes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... seismic safety substantially equivalent to that provided by use of the 1988 National Earthquake Hazards Reduction Program (NEHRP) Recommended Provisions (Copies are available from the Office of Earthquakes and...

  16. 49 CFR 41.120 - Acceptable model codes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... seismic safety substantially equivalent to that provided by use of the 1988 National Earthquake Hazards Reduction Program (NEHRP) Recommended Provisions (Copies are available from the Office of Earthquakes and...

  17. 49 CFR 41.120 - Acceptable model codes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... seismic safety substantially equivalent to that provided by use of the 1988 National Earthquake Hazards Reduction Program (NEHRP) Recommended Provisions (Copies are available from the Office of Earthquakes and...

  18. 49 CFR 41.120 - Acceptable model codes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... seismic safety substantially equivalent to that provided by use of the 1988 National Earthquake Hazards Reduction Program (NEHRP) Recommended Provisions (Copies are available from the Office of Earthquakes and...

  19. 49 CFR 41.120 - Acceptable model codes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... seismic safety substantially equivalent to that provided by use of the 1988 National Earthquake Hazards Reduction Program (NEHRP) Recommended Provisions (Copies are available from the Office of Earthquakes and...

  20. Sheath effects on current collection by particle detectors with narrow acceptance angles

    NASA Technical Reports Server (NTRS)

    Singh, N.; Baugher, C. R.

    1981-01-01

    Restriction of the aperture acceptance angle of an ion or electron trap on an attracting spacecraft significantly alters the volt-ampere characteristics of the instrument in a low Mach number plasma. It is shown when the angular acceptance of the aperture is restricted the current to the collector tends to be independent of the Debye length. Expressions for the RPA characteristics for both a thin sheath and a thick sheath are derived; and it is shown that as the aperture is narrowed the curves tend toward equivalence.

  1. Cross-cultural Adaptation of the Oral Anticoagulation Knowledge Test to the Brazilian Portuguese.

    PubMed

    Praxedes, Marcus Fernando da Silva; Abreu, Mauro Henrique Nogueira Guimarães; Ribeiro, Daniel Dias; Marcolino, Milena Soriano; Paiva, Saul Martins de; Martins, Maria Auxiliadora Parreiras

    2017-05-01

    Patients' knowledge about oral anticoagulant therapy may favor the achievement of therapeutic results and the prevention of adverse pharmacotherapy-related events. Brazil lacks validated instruments for assessing the patient's knowledge about treatment with warfarin. This study aimed to perform the cross-cultural adaptation of the Oral Anticoagulation Knowledge (OAK) Test instrument from English into Portuguese. This is a methodological study developed in an anticoagulation clinic of a public university hospital. The study included initial translation, synthesis of translations, back-translation, review by the experts committee and pre-testing with 30 individuals. We obtained semantic equivalence through the analysis of the referential and general meaning of each item. The conceptual equivalence of the items sought to demonstrate the relevance and acceptability of the instrument. The process of cross-cultural adaptation produced the final version of the OAK Test in Brazilian Portuguese entitled "Teste de Conhecimento sobre Anticoagulação Oral". There was a suitable semantic and conceptual equivalence between the adapted version and the original version, as well as an excellent acceptability of this instrument.

  2. Equivalence of ELISpot Assays Demonstrated between Major HIV Network Laboratories

    PubMed Central

    Levine, Gail L.; Sambor, Anna; Carter, Donald K.; Sato, Alicia; Kopycinski, Jakub; Hayes, Peter; Hahn, Bridget; Birungi, Josephine; Tarragona-Fiol, Tony; Wan, Hong; Randles, Mark; Cooper, Andrew Raxworthy; Ssemaganda, Aloysius; Clark, Lorna; Kaleebu, Pontiano; Self, Steven G.; Koup, Richard; Wood, Blake; McElrath, M. Juliana; Cox, Josephine H.; Hural, John; Gilmour, Jill

    2010-01-01

    Background The Comprehensive T Cell Vaccine Immune Monitoring Consortium (CTC-VIMC) was created to provide standardized immunogenicity monitoring services for HIV vaccine trials. The ex vivo interferon-gamma (IFN-γ) ELISpot is used extensively as a primary immunogenicity assay to assess T cell-based vaccine candidates in trials for infectious diseases and cancer. Two independent, GCLP-accredited central laboratories of CTC-VIMC routinely use their own standard operating procedures (SOPs) for ELISpot within two major networks of HIV vaccine trials. Studies are imperatively needed to assess the comparability of ELISpot measurements across laboratories to benefit optimal advancement of vaccine candidates. Methods We describe an equivalence study of the two independently qualified IFN-g ELISpot SOPs. The study design, data collection and subsequent analysis were managed by independent statisticians to avoid subjectivity. The equivalence of both response rates and positivity calls to a given stimulus was assessed based on pre-specified acceptance criteria derived from a separate pilot study. Findings Detection of positive responses was found to be equivalent between both laboratories. The 95% C.I. on the difference in response rates, for CMV (−1.5%, 1.5%) and CEF (−0.4%, 7.8%) responses, were both contained in the pre-specified equivalence margin of interval [−15%, 15%]. The lower bound of the 95% C.I. on the proportion of concordant positivity calls for CMV (97.2%) and CEF (89.5%) were both greater than the pre-specified margin of 70%. A third CTC-VIMC central laboratory already using one of the two SOPs also showed comparability when tested in a smaller sub-study. Interpretation The described study procedure provides a prototypical example for the comparison of bioanalytical methods in HIV vaccine and other disease fields. This study also provides valuable and unprecedented information for future vaccine candidate evaluations on the comparison and pooling of ELISpot results generated by the CTC-VIMC central core laboratories. PMID:21179404

  3. "Convenience Food."

    ERIC Educational Resources Information Center

    Lemieux, Colette

    1980-01-01

    Defines the meaning of the American expression "convenience food," quoting definitions given by dictionaries and specialized publications. Discusses the problem of finding the exact equivalent of this expression in French, and recommends some acceptable translations. (MES)

  4. 77 FR 60985 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of three new equivalent methods for monitoring ambient air quality. SUMMARY... equivalent methods, one for measuring concentrations of PM 2.5 , one for measuring concentrations of PM 10...

  5. 78 FR 67360 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Five New Equivalent Methods

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-12

    ... Methods: Designation of Five New Equivalent Methods AGENCY: Office of Research and Development; Environmental Protection Agency (EPA). ACTION: Notice of the designation of five new equivalent methods for...) has designated, in accordance with 40 CFR Part 53, five new equivalent methods, one for measuring...

  6. Potential contribution of mangoes to reduction of vitamin A deficiency in Kenya.

    PubMed

    Muoki, Penina N; Makokha, Anselimo O; Onyango, Christine A; Ojijo, Nelson K O

    2009-01-01

    The β-carotene content of fresh and dried mangoes commonly consumed in Kenya was evaluated and converted to retinol equivalent (RE). Mango fruits of varieties Ngowe, Apple, and Tommy Atkins were harvested at mature green, partially ripe, and ripe stages and their β-carotene content analyzed. The stability of β-carotene in sun dried mangoes was also studied over 6 months under usual marketing conditions used in Kenya. The effect of using simple pretreatment methods prior to drying of mango slices on retention of β-carotene was as well evaluated. In amounts acceptable to children and women, fresh and dried mangoes can supply 50% or more of the daily required retinol equivalent for children and women. Stage of ripeness, variety, postharvest holding temperature, method of drying, and storage time of dried mango slices affected β-carotene content and consequently vitamin A value of the fruits. Apple variety grown in Machakos had the highest β-carotene. It exceeded the daily RE requirements by 11.8% and 21.5% for women and children respectively. Fresh or dried mangoes are a significant provitamin A source and should be included in food-based approaches aiming to reduce vitamin A deficiency.

  7. Equivalent model of a dually-fed machine for electric drive control systems

    NASA Astrophysics Data System (ADS)

    Ostrovlyanchik, I. Yu; Popolzin, I. Yu

    2018-05-01

    The article shows that the mathematical model of a dually-fed machine is complicated because of the presence of a controlled voltage source in the rotor circuit. As a method of obtaining a mathematical model, the method of a generalized two-phase electric machine is applied and a rotating orthogonal coordinate system is chosen that is associated with the representing vector of a stator current. In the chosen coordinate system in the operator form the differential equations of electric equilibrium for the windings of the generalized machine (the Kirchhoff equation) are written together with the expression for the moment, which determines the electromechanical energy transformation in the machine. Equations are transformed so that they connect the currents of the windings, that determine the moment of the machine, and the voltages on these windings. The structural diagram of the machine is assigned to the written equations. Based on the written equations and accepted assumptions, expressions were obtained for the balancing the EMF of windings, and on the basis of these expressions an equivalent mathematical model of a dually-fed machine is proposed, convenient for use in electric drive control systems.

  8. 77 FR 55832 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of a New Equivalent Method

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... Methods: Designation of a New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of a new equivalent method for monitoring ambient air quality. SUMMARY: Notice is... part 53, a new equivalent method for measuring concentrations of PM 2.5 in the ambient air. FOR FURTHER...

  9. Functional Equivalence Acceptance Testing of FUN3D for Entry Descent and Landing Applications

    NASA Technical Reports Server (NTRS)

    Gnoffo, Peter A.; Wood, William A.; Kleb, William L.; Alter, Stephen J.; Glass, Christopher E.; Padilla, Jose F.; Hammond, Dana P.; White, Jeffery A.

    2013-01-01

    The functional equivalence of the unstructured grid code FUN3D to the the structured grid code LAURA (Langley Aerothermodynamic Upwind Relaxation Algorithm) is documented for applications of interest to the Entry, Descent, and Landing (EDL) community. Examples from an existing suite of regression tests are used to demonstrate the functional equivalence, encompassing various thermochemical models and vehicle configurations. Algorithm modifications required for the node-based unstructured grid code (FUN3D) to reproduce functionality of the cell-centered structured code (LAURA) are also documented. Challenges associated with computation on tetrahedral grids versus computation on structured-grid derived hexahedral systems are discussed.

  10. 33 CFR 143.120 - Floating OCS facilities.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (Marine Engineering) and J (Electrical Engineering) of 46 CFR chapter I and 46 CFR part 108 (Design and... that provide an equivalent level of safety may be accepted. These requirements do not apply to...

  11. 33 CFR 143.120 - Floating OCS facilities.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (Marine Engineering) and J (Electrical Engineering) of 46 CFR chapter I and 46 CFR part 108 (Design and... that provide an equivalent level of safety may be accepted. These requirements do not apply to...

  12. 33 CFR 143.120 - Floating OCS facilities.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (Marine Engineering) and J (Electrical Engineering) of 46 CFR chapter I and 46 CFR part 108 (Design and... that provide an equivalent level of safety may be accepted. These requirements do not apply to...

  13. 75 FR 45627 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-03

    ... Monitoring Reference and Equivalent Methods: Designation of One New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of one new equivalent method for monitoring ambient air... accordance with 40 CFR part 53, one new equivalent method for measuring concentrations of lead (Pb) in total...

  14. 76 FR 62402 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... Monitoring Reference and Equivalent Methods; Designation of One New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of one new equivalent method for monitoring ambient air... accordance with 40 CFR Part 53, one new equivalent method for measuring concentrations of ozone (O 3 ) in the...

  15. 75 FR 51039 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-18

    ... Monitoring Reference and Equivalent Methods: Designation of Two New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of two new equivalent methods for monitoring ambient air... accordance with 40 CFR Part 53, two new equivalent methods for measuring concentrations of PM 10 and sulfur...

  16. 75 FR 22126 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-27

    ... Monitoring Reference and Equivalent Methods: Designation of One New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of one new equivalent method for monitoring ambient air... accordance with 40 CFR Part 53, one new equivalent method for measuring concentrations of ozone (O 3 ) in the...

  17. 75 FR 30022 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-28

    ... Monitoring Reference and Equivalent Methods: Designation of One New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of one new equivalent method for monitoring ambient air... accordance with 40 CFR Part 53, one new equivalent method for measuring concentrations of lead (Pb) in total...

  18. 75 FR 9894 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-04

    ... Monitoring Reference and Equivalent Methods: Designation of One New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of one new equivalent method for monitoring ambient air... accordance with 40 CFR part 53, one new equivalent method for measuring concentrations of lead (Pb) in total...

  19. Einstein and Rastall theories of gravitation in comparison

    NASA Astrophysics Data System (ADS)

    Darabi, F.; Moradpour, H.; Licata, I.; Heydarzade, Y.; Corda, C.

    2018-01-01

    We profit by a recent paper of Visser claiming that Rastall gravity is equivalent to Einstein gravity to compare the two gravitational theories in a general way. Our conclusions are different from Visser's ones. We indeed argue that these two theories are not equivalent. In fact, Rastall theory of gravity is an "open" theory when compared to Einstein general theory of relativity. Thus, it is ready to accept the challenges of observational cosmology and quantum gravity.

  20. Adiabatic dynamics of one-dimensional classical Hamiltonian dissipative systems

    NASA Astrophysics Data System (ADS)

    Pritula, G. M.; Petrenko, E. V.; Usatenko, O. V.

    2018-02-01

    A linearized plane pendulum with the slowly varying mass and length of string and the suspension point moving at a slowly varying speed is presented as an example of a simple 1D mechanical system described by the generalized harmonic oscillator equation, which is a basic model in discussion of the adiabatic dynamics and geometric phase. The expression for the pendulum geometric phase is obtained by three different methods. The pendulum is shown to be canonically equivalent to the damped harmonic oscillator. This supports the mathematical conclusion, not widely accepted in physical community, of no difference between the dissipative and Hamiltonian 1D systems.

  1. Accounting for the professional work of pathologists performing autopsies.

    PubMed

    Sinard, John H

    2013-02-01

    With an increasing trend toward fee-code-based methods of measuring the clinical professional productivity of pathologists, those pathologists whose clinical activities include the performance of autopsies have been disadvantaged by the lack of generally accepted workload equivalents for autopsy performance and supervision. To develop recommended benchmarks to account for this important and often overlooked professional activity. Based on the professional experience of members of the Autopsy Committee of the College of American Pathologists, a survey of autopsy pathologists, and the limited additional material available in the literature, we developed recommended workload equivalents for the professional work associated with performing an autopsy, which we elected to express as multiples of established Current Procedural Terminology codes. As represented in Table 3 , we recommend that the professional work associated with a full adult autopsy be equivalent to 5.5 × 88309-26. Additional professional credit of 1.5 × 88309-26 should be added for evaluation of the brain and for a detailed clinical-pathologic discussion. The corresponding value for a fetal/neonatal autopsy is 4.0 × 88309-26. Although we recognize that autopsy practices vary significantly from institution to institution, it is hoped that our proposed guidelines will be a valuable starting point that individual practices can then adapt, taking into account the specifics of their practice environment.

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Matsui, Yusuke, E-mail: wckyh140@yahoo.co.jp; Hiraki, Takao, E-mail: takaoh@tc4.so-net.ne.jp; Gobara, Hideo, E-mail: gobara@cc.okayama-u.ac.jp

    IntroductionComputed tomography (CT) fluoroscopy-guided renal cryoablation and lung radiofrequency ablation (RFA) have received increasing attention as promising cancer therapies. Although radiation exposure of interventional radiologists during these procedures is an important concern, data on operator exposure are lacking.Materials and MethodsRadiation dose to interventional radiologists during CT fluoroscopy-guided renal cryoablation (n = 20) and lung RFA (n = 20) was measured prospectively in a clinical setting. Effective dose to the operator was calculated from the 1-cm dose equivalent measured on the neck outside the lead apron, and on the left chest inside the lead apron, using electronic dosimeters. Equivalent dose to the operator’s finger skinmore » was measured using thermoluminescent dosimeter rings.ResultsThe mean (median) effective dose to the operator per procedure was 6.05 (4.52) μSv during renal cryoablation and 0.74 (0.55) μSv during lung RFA. The mean (median) equivalent dose to the operator’s finger skin per procedure was 2.1 (2.1) mSv during renal cryoablation, and 0.3 (0.3) mSv during lung RFA.ConclusionRadiation dose to interventional radiologists during renal cryoablation and lung RFA were at an acceptable level, and in line with recommended dose limits for occupational radiation exposure.« less

  3. Single-Cell RT-PCR in Microfluidic Droplets with Integrated Chemical Lysis.

    PubMed

    Kim, Samuel C; Clark, Iain C; Shahi, Payam; Abate, Adam R

    2018-01-16

    Droplet microfluidics can identify and sort cells using digital reverse transcription polymerase chain reaction (RT-PCR) signals from individual cells. However, current methods require multiple microfabricated devices for enzymatic cell lysis and PCR reagent addition, making the process complex and prone to failure. Here, we describe a new approach that integrates all components into a single device. The method enables controlled exposure of isolated single cells to a high pH buffer, which lyses cells and inactivates reaction inhibitors but can be instantly neutralized with RT-PCR buffer. Using our chemical lysis approach, we distinguish individual cells' gene expression with data quality equivalent to more complex two-step workflows. Our system accepts cells and produces droplets ready for amplification, making single-cell droplet RT-PCR faster and more reliable.

  4. 42 CFR 440.340 - Actuarial report for benchmark-equivalent coverage.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... individual who is a member of the American Academy of Actuaries (AAA). (2) Using generally accepted actuarial principles and methodologies of the AAA. (3) Using a standardized set of utilization and price factors. (4...

  5. Coefficient alpha and interculture test selection.

    PubMed

    Thurber, Steven; Kishi, Yasuhiro

    2014-04-01

    The internal consistency reliability of a measure can be a focal point in an evaluation of the potential adequacy of an instrument for adaptation to another cultural setting. Cronbach's alpha (α) coefficient is often used as the statistical index for such a determination. However, alpha presumes a tau-equivalent test and may constitute an inaccurate population estimate for multidimensional tests. These notions are expanded and examined with a Japanese version of a questionnaire on nursing attitudes toward suicidal patients, originally constructed in Sweden using the English language. The English measure was reported to have acceptable internal consistency (α) albeit the dimensionality of the questionnaire was not addressed. The Japanese scale was found to lack tau-equivalence. An alternative to alpha, "composite reliability," was computed and found to be below acceptable standards in magnitude and precision. Implications for research application of the Japanese instrument are discussed. © The Author(s) 2012.

  6. Civil helicopter noise assessment study Boeing-Vertol model 347. [recommendations for reduction of helicopter noise levels

    NASA Technical Reports Server (NTRS)

    Hinterkeuser, E. G.; Sternfeld, H., Jr.

    1974-01-01

    A study was conducted to forecast the noise restrictions which may be imposed on civil transport helicopters in the 1975-1985 time period. Certification and community acceptance criteria were predicted. A 50 passenger tandem rotor helicopter based on the Boeing-Vertol Model 347 was studied to determine the noise reductions required, and the means of achieving them. Some of the important study recommendations are: (1) certification limits should be equivalent to 95 EPNdb at data points located at 500 feet to each side of the touchdown/takeoff point, and 1000 feet from this point directly under the approach and departure flight path. (2) community acceptance should be measured as Equivalent Noise Level (Leq), based on dBA, with separate limits for day and night operations, and (3) in order to comply with the above guidelines, the Model 347 helicopter will require studies and tests leading to several modifications.

  7. Ecological Equivalence Assessment Methods: What Trade-Offs between Operationality, Scientific Basis and Comprehensiveness?

    PubMed

    Bezombes, Lucie; Gaucherand, Stéphanie; Kerbiriou, Christian; Reinert, Marie-Eve; Spiegelberger, Thomas

    2017-08-01

    In many countries, biodiversity compensation is required to counterbalance negative impacts of development projects on biodiversity by carrying out ecological measures, called offset when the goal is to reach "no net loss" of biodiversity. One main issue is to ensure that offset gains are equivalent to impact-related losses. Ecological equivalence is assessed with ecological equivalence assessment methods taking into account a range of key considerations that we summarized as ecological, spatial, temporal, and uncertainty. When equivalence assessment methods take into account all considerations, we call them "comprehensive". Equivalence assessment methods should also aim to be science-based and operational, which is challenging. Many equivalence assessment methods have been developed worldwide but none is fully satisfying. In the present study, we examine 13 equivalence assessment methods in order to identify (i) their general structure and (ii) the synergies and trade-offs between equivalence assessment methods characteristics related to operationality, scientific-basis and comprehensiveness (called "challenges" in his paper). We evaluate each equivalence assessment methods on the basis of 12 criteria describing the level of achievement of each challenge. We observe that all equivalence assessment methods share a general structure, with possible improvements in the choice of target biodiversity, the indicators used, the integration of landscape context and the multipliers reflecting time lags and uncertainties. We show that no equivalence assessment methods combines all challenges perfectly. There are trade-offs between and within the challenges: operationality tends to be favored while scientific basis are integrated heterogeneously in equivalence assessment methods development. One way of improving the challenges combination would be the use of offset dedicated data-bases providing scientific feedbacks on previous offset measures.

  8. A Riemannian geometric mapping technique for identifying incompressible equivalents to subsonic potential flows

    NASA Astrophysics Data System (ADS)

    German, Brian Joseph

    This research develops a technique for the solution of incompressible equivalents to planar steady subsonic potential flows. Riemannian geometric formalism is used to develop a gauge transformation of the length measure followed by a curvilinear coordinate transformation to map the given subsonic flow into a canonical Laplacian flow with the same boundary conditions. The effect of the transformation is to distort both the immersed profile shape and the domain interior nonuniformly as a function of local flow properties. The method represents the full nonlinear generalization of the classical methods of Prandtl-Glauert and Karman-Tsien. Unlike the classical methods which are "corrections," this method gives exact results in the sense that the inverse mapping produces the subsonic full potential solution over the original airfoil, up to numerical accuracy. The motivation for this research was provided by an observed analogy between linear potential flow and the special theory of relativity that emerges from the invariance of the d'Alembert wave equation under Lorentz transformations. This analogy is well known in an operational sense, being leveraged widely in linear unsteady aerodynamics and acoustics, stemming largely from the work of Kussner. Whereas elements of the special theory can be invoked for compressibility effects that are linear and global in nature, the question posed in this work was whether other mathematical techniques from the realm of relativity theory could be used to similar advantage for effects that are nonlinear and local. This line of thought led to a transformation leveraging Riemannian geometric methods common to the general theory of relativity. A gauge transformation is used to geometrize compressibility through the metric tensor of the underlying space to produce an equivalent incompressible flow that lives not on a plane but on a curved surface. In this sense, forces owing to compressibility can be ascribed to the geometry of space in much the same way that general relativity ascribes gravitational forces to the curvature of space-time. Although the analogy with general relativity is fruitful, it is important not to overstate the similarities between compressibility and the physics of gravity, as the interest for this thesis is primarily in the mathematical framework and not physical phenomenology or epistemology. The thesis presents the philosophy and theory for the transformation method followed by a numerical method for practical solutions of equivalent incompressible flows over arbitrary closed profiles. The numerical method employs an iterative approach involving the solution of the equivalent incompressible flow with a panel method, the calculation of the metric tensor for the gauge transformation, and the solution of the curvilinear coordinate mapping to the canonical flow with a finite difference approach for the elliptic boundary value problem. This method is demonstrated for non-circulatory flow over a circular cylinder and both symmetric and lifting flows over a NACA 0012 profile. Results are validated with accepted subcritical full potential test cases available in the literature. For chord-preserving mapping boundary conditions, the results indicate that the equivalent incompressible profiles thicken with Mach number and develop a leading edge droop with increased angle of attack. Two promising areas of potential applicability of the method have been identified. The first is in airfoil inverse design methods leveraging incompressible flow knowledge including heuristics and empirical data for the potential field effects on viscous phenomena such as boundary layer transition and separation. The second is in aerodynamic testing using distorted similarity-scaled models.

  9. PET Timing Performance Measurement Method Using NEMA NEC Phantom

    NASA Astrophysics Data System (ADS)

    Wang, Gin-Chung; Li, Xiaoli; Niu, Xiaofeng; Du, Huini; Balakrishnan, Karthik; Ye, Hongwei; Burr, Kent

    2016-06-01

    When comparing the performance of time-of-flight whole-body PET scanners, timing resolution is one important benchmark. Timing performance is heavily influenced by detector and electronics design. Even for the same scanner design, measured timing resolution is a function of many factors including the activity concentration, geometry and positioning of the radioactive source. Due to lack of measurement standards, the timing resolutions reported in the literature may not be directly comparable and may not describe the timing performance under clinically relevant conditions. In this work we introduce a method which makes use of the data acquired during the standard NEMA Noise-Equivalent-Count-Rate (NECR) measurements, and compare it to several other timing resolution measurement methods. The use of the NEMA NEC phantom, with well-defined dimensions and radioactivity distribution, is attractive because it has been widely accepted in the industry and allows for the characterization of timing resolution across a more relevant range of conditions.

  10. Transfer of analytical procedures: a panel of strategies selected for risk management, with emphasis on an integrated equivalence-based comparative testing approach.

    PubMed

    Agut, C; Caron, A; Giordano, C; Hoffman, D; Ségalini, A

    2011-09-10

    In 2001, a multidisciplinary team made of analytical scientists and statisticians at Sanofi-aventis has published a methodology which has governed, from that time, the transfers from R&D sites to Manufacturing sites of the release monographs. This article provides an overview of the recent adaptations brought to this original methodology taking advantage of our experience and the new regulatory framework, and, in particular, the risk management perspective introduced by ICH Q9. Although some alternate strategies have been introduced in our practices, the comparative testing one, based equivalence testing as statistical approach, remains the standard for assays lying on very critical quality attributes. This is conducted with the concern to control the most important consumer's risk involved at two levels in analytical decisions in the frame of transfer studies: risk, for the receiving laboratory, to take poor release decisions with the analytical method and risk, for the sending laboratory, to accredit such a receiving laboratory on account of its insufficient performances with the method. Among the enhancements to the comparative studies, the manuscript presents the process settled within our company for a better integration of the transfer study into the method life-cycle, just as proposals of generic acceptance criteria and designs for assay and related substances methods. While maintaining rigor and selectivity of the original approach, these improvements tend towards an increased efficiency in the transfer operations. Copyright © 2011 Elsevier B.V. All rights reserved.

  11. Comparison of fluorescence microscopy and solid-phase cytometry methods for counting bacteria in water

    USGS Publications Warehouse

    Lisle, John T.; Hamilton, Martin A.; Willse, Alan R.; McFeters, Gordon A.

    2004-01-01

    Total direct counts of bacterial abundance are central in assessing the biomass and bacteriological quality of water in ecological and industrial applications. Several factors have been identified that contribute to the variability in bacterial abundance counts when using fluorescent microscopy, the most significant of which is retaining an adequate number of cells per filter to ensure an acceptable level of statistical confidence in the resulting data. Previous studies that have assessed the components of total-direct-count methods that contribute to this variance have attempted to maintain a bacterial cell abundance value per filter of approximately 106 cells filter-1. In this study we have established the lower limit for the number of bacterial cells per filter at which the statistical reliability of the abundance estimate is no longer acceptable. Our results indicate that when the numbers of bacterial cells per filter were progressively reduced below 105, the microscopic methods increasingly overestimated the true bacterial abundance (range, 15.0 to 99.3%). The solid-phase cytometer only slightly overestimated the true bacterial abundances and was more consistent over the same range of bacterial abundances per filter (range, 8.9 to 12.5%). The solid-phase cytometer method for conducting total direct counts of bacteria was less biased and performed significantly better than any of the microscope methods. It was also found that microscopic count data from counting 5 fields on three separate filters were statistically equivalent to data from counting 20 fields on a single filter.

  12. Validation of Milliflex® Quantum for Bioburden Testing of Pharmaceutical Products.

    PubMed

    Gordon, Oliver; Goverde, Marcel; Staerk, Alexandra; Roesti, David

    2017-01-01

    This article reports the validation strategy used to demonstrate that the Milliflex ® Quantum yielded non-inferior results to the traditional bioburden method. It was validated according to USP <1223>, European Pharmacopoeia 5.1.6, and Parenteral Drug Association Technical Report No. 33 and comprised the validation parameters robustness, ruggedness, repeatability, specificity, limit of detection and quantification, accuracy, precision, linearity, range, and equivalence in routine operation. For the validation, a combination of pharmacopeial ATCC strains as well as a broad selection of in-house isolates were used. In-house isolates were used in stressed state. Results were statistically evaluated regarding the pharmacopeial acceptance criterion of ≥70% recovery compared to the traditional method. Post-hoc test power calculations verified the appropriateness of the used sample size to detect such a difference. Furthermore, equivalence tests verified non-inferiority of the rapid method as compared to the traditional method. In conclusion, the rapid bioburden on basis of the Milliflex ® Quantum was successfully validated as alternative method to the traditional bioburden test. LAY ABSTRACT: Pharmaceutical drug products must fulfill specified quality criteria regarding their microbial content in order to ensure patient safety. Drugs that are delivered into the body via injection, infusion, or implantation must be sterile (i.e., devoid of living microorganisms). Bioburden testing measures the levels of microbes present in the bulk solution of a drug before sterilization, and thus it provides important information for manufacturing a safe product. In general, bioburden testing has to be performed using the methods described in the pharmacopoeias (membrane filtration or plate count). These methods are well established and validated regarding their effectiveness; however, the incubation time required to visually identify microbial colonies is long. Thus, alternative methods that detect microbial contamination faster will improve control over the manufacturing process and speed up product release. Before alternative methods may be used, they must undergo a side-by-side comparison with pharmacopeial methods. In this comparison, referred to as validation, it must be shown in a statistically verified manner that the effectiveness of the alternative method is at least equivalent to that of the pharmacopeial methods. Here we describe the successful validation of an alternative bioburden testing method based on fluorescent staining of growing microorganisms applying the Milliflex ® Quantum system by MilliporeSigma. © PDA, Inc. 2017.

  13. SU-E-T-178: Experimental Study of Acceptable Movement Conditions for SBRT Lung Treatments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carrasco de Fez, P; Ruiz-Martinez, A; Jornet, N

    2014-06-01

    Purpose: To experimentally study the acceptable movement conditions for SBRT lung treatments we quantified with film dosimetry the change in dose distributions due to periodic movements of 5 different amplitudes and 4 respiratory gating duty cycles on a SBRT treatment plan. Methods: We planned a SBRT treatment plan for the QUASAR™ (Modus Medical) phantom equipped with the respiratory motion device. We placed a 3 mm water-equivalent sphere simulating a tumour inside the lung-equivalent insert. This sphere is divided in two hemispheres that allow placing films in between. We used radiochromic EBT2™ (Ashland) films. We oriented the lung insert in suchmore » a way that sagittal dose distributions could be measured. We applied a sinusoidal movement with 3 s period for 5 different amplitudes of 0(static), 5, 7, 10, 15 and 20 mm without gating. For the 20 mm amplitude we studied the gating technique with 4 duty cycles of 20, 40, 60 and 80% of the respiratory cycle. Each situation was irradiated in a Clinac 2100 linac (Varian) equipped with the RPM™ system. FilmQA Pro™ (Ashland) software together with an Expression 10000XL scanner (EPSON) were used to analyze and compare the measured dose distributions with those planned by the Eclipse™ TPS v. 8.9 (Varian) by means of gamma analysis with 6 criteria: 5%/3mm, 5%/2mm, 5%/1mm, 3%/3mm, 3%/2mm and 2%/2mm (threshold of 10%). Results: Movements with amplitude of less than 7mm do not significantly modified the dosimetry. Gating duty cycles of less than 40% yielded also acceptable results for a 2 cm amplitude movement. Conclusion: To safely perform daily accurate SBRT treatments, movements have to be restricted to 7 mm amplitude (±3.5 mm). Otherwise, a gating strategy should be considered.« less

  14. 46 CFR 199.09 - Equivalents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LIFESAVING APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR..., material, or lifesaving appliance or arrangement, the Commandant (CG-521) may accept any other fitting, material, or lifesaving appliance or arrangement that is at least as effective as that required by this...

  15. Sensitivity analysis of a wing aeroelastic response

    NASA Technical Reports Server (NTRS)

    Kapania, Rakesh K.; Eldred, Lloyd B.; Barthelemy, Jean-Francois M.

    1991-01-01

    A variation of Sobieski's Global Sensitivity Equations (GSE) approach is implemented to obtain the sensitivity of the static aeroelastic response of a three-dimensional wing model. The formulation is quite general and accepts any aerodynamics and structural analysis capability. An interface code is written to convert one analysis's output to the other's input, and visa versa. Local sensitivity derivatives are calculated by either analytic methods or finite difference techniques. A program to combine the local sensitivities, such as the sensitivity of the stiffness matrix or the aerodynamic kernel matrix, into global sensitivity derivatives is developed. The aerodynamic analysis package FAST, using a lifting surface theory, and a structural package, ELAPS, implementing Giles' equivalent plate model are used.

  16. Calibration factors for the SNOOPY NP-100 neutron dosimeter

    NASA Astrophysics Data System (ADS)

    Moscu, D. F.; McNeill, F. E.; Chase, J.

    2007-10-01

    Within CANDU nuclear power facilities, only a small fraction of workers are exposed to neutron radiation. For these individuals, roughly 4.5% of the total radiation equivalent dose is the result of exposure to neutrons. When this figure is considered across all workers receiving external exposure of any kind, only 0.25% of the total radiation equivalent dose is the result of exposure to neutrons. At many facilities, the NP-100 neutron dosimeter, manufactured by Canberra Industries Incorporated, is employed in both direct and indirect dosimetry methods. Also known as "SNOOPY", these detectors undergo calibration, which results in a calibration factor relating the neutron count rate to the ambient dose equivalent rate, using a standard Am-Be neutron source. Using measurements presented in a technical note, readings from the dosimeter for six different neutron fields in six source-detector orientations were used, to determine a calibration factor for each of these sources. The calibration factor depends on the neutron energy spectrum and the radiation weighting factor to link neutron fluence to equivalent dose. Although the neutron energy spectra measured in the CANDU workplace are quite different than that of the Am-Be calibration source, the calibration factor remains constant - within acceptable limits - regardless of the neutron source used in the calibration; for the specified calibration orientation and current radiation weighting factors. However, changing the value of the radiation weighting factors would result in changes to the calibration factor. In the event of changes to the radiation weighting factors, it will be necessary to assess whether a change to the calibration process or resulting calibration factor is warranted.

  17. Testing of Hypothesis in Equivalence and Non Inferiority Trials-A Concept.

    PubMed

    Juneja, Atul; Aggarwal, Abha R; Adhikari, Tulsi; Pandey, Arvind

    2016-04-01

    Establishing the appropriate hypothesis is one of the important steps for carrying out the statistical tests/analysis. Its understanding is important for interpreting the results of statistical analysis. The current communication attempts to provide the concept of testing of hypothesis in non inferiority and equivalence trials, where the null hypothesis is just reverse of what is set up for conventional superiority trials. It is similarly looked for rejection for establishing the fact the researcher is intending to prove. It is important to mention that equivalence or non inferiority cannot be proved by accepting the null hypothesis of no difference. Hence, establishing the appropriate statistical hypothesis is extremely important to arrive at meaningful conclusion for the set objectives in research.

  18. Design of clinical trials of antidepressants: should a placebo control arm be included?

    PubMed

    Fritze, J; Möller, H J

    2001-01-01

    There is no doubt that available antidepressants are efficacious and effective. Nevertheless, more effective drugs with improved tolerability are needed. With this need in mind, some protagonists claim that future antidepressants should be proved superior to, or at least as effective as, established antidepressants, making placebo control methodologically dispensable in clinical trials. Moreover, the use of placebo control is criticised as unethical because it might result in effective treatment being withheld. There are, however, a number of methodological reasons why placebo control is indispensable for the proof of efficacy of antidepressants. Comparing investigational antidepressants only with standard antidepressants and not placebo yields ambiguous results that are difficult to interpret, be it in superiority or equivalence testing, and this method of assessment requires larger sample sizes than those required with the use of placebo control. Experimental methodology not adhering to the optimal study design is ethically questionable. Restricting the testing of investigational antidepressants only to superiority over standard antidepressants is an obstacle to therapeutic progress in terms of tolerability and the detection of innovative mechanisms of action from which certain subgroups of future patients might benefit. The use of a methodology that requires larger samples for testing of superiority or equivalence is also ethically questionable. In view of the high placebo response rates in trials of antidepressants, placebo treatment does not mean withholding effective treatment. Accepting the necessity of the clinical evaluation of new, potentially ineffective antidepressants implicitly means accepting placebo control as ethically justified. Three- or multi-arm comparisons including placebo and an active reference represent the optimal study design.

  19. Experimental characterization of the AFIT neutron facility. Master's thesis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lessard, O.J.

    1993-09-01

    AFIT's Neutron Facility was characterized for room-return neutrons using a (252)Cf source and a Bonner sphere spectrometer with three experimental models, the shadow shield, the Eisenhauer, Schwartz, and Johnson (ESJ), and the polynomial models. The free-field fluences at one meter from the ESJ and polynomial models were compared to the equivalent value from the accepted experimental shadow shield model to determine the suitability of the models in the AFIT facility. The polynomial model behaved erratically, as expected, while the ESJ model compared to within 4.8% of the shadow shield model results for the four Bonner sphere calibration. The ratio ofmore » total fluence to free-field fluence at one meter for the ESJ model was then compared to the equivalent ratio obtained by a Monte Cario Neutron-Photon transport code (MCNP), an accepted computational model. The ESJ model compared to within 6.2% of the MCNP results. AFIT's fluence ratios were compared to equivalent ratios reported by three other neutron facilities which verified that AFIT's results fit previously published trends based on room volumes. The ESJ model appeared adequate for health physics applications and was chosen was chosen for calibration of the AFIT facility. Neutron Detector, Bonner Sphere, Neutron Dosimetry, Room Characterization.« less

  20. Is a structured, manualized, evidence-based treatment protocol culturally competent and equivalently effective among American Indian parents in child welfare?

    PubMed

    Chaffin, Mark; Bard, David; Bigfoot, Dolores Subia; Maher, Erin J

    2012-08-01

    In a statewide implementation, the manualized SafeCare home-based model was effective in reducing child welfare recidivism and producing high client satisfaction. Concerns about the effectiveness and acceptability of structured, manualized models with American Indians have been raised in the literature, but have rarely been directly tested. This study tests recidivism reduction equivalency and acceptability among American Indian parents. A subpopulation of 354 American Indian parents was drawn from a larger trial that compared services with versus without modules of the SafeCare model. Outcomes were 6-year recidivism, pre/post/follow-up measures of depression and child abuse potential, and posttreatment consumer ratings of working alliance, service satisfaction, and cultural competency. Recidivism reduction among American Indian parents was found to be equivalent for cases falling within customary SafeCare inclusion criteria. When extended to cases outside customary inclusion boundaries, there was no apparent recidivism advantage or disadvantage. Contrary to concerns, SafeCare had higher consumer ratings of cultural competency, working alliance, service quality, and service benefit. Findings support using SafeCare with American Indians parents who meet customary SafeCare inclusion criteria. Findings do not support concerns in the literature that a manualized, structured, evidence-based model might be less effective or culturally unacceptable for American Indians.

  1. Is a Structured, Manualized, Evidence-Based Treatment Protocol Culturally Competent and Equivalently Effective Among American Indian Parents in Child Welfare?

    PubMed Central

    Chaffin, Mark; Bard, David; Bigfoot, Dolores Subia; Maher, Erin J.

    2015-01-01

    In a statewide implementation, the manualized SafeCare home–based model was effective in reducing child welfare recidivism and producing high client satisfaction. Concerns about the effectiveness and acceptability of structured, manualized models with American Indians have been raised in the literature, but have rarely been directly tested. This study tests recidivism reduction equivalency and acceptability among American Indian parents. A subpopulation of 354 American Indian parents was drawn from a larger trial that compared services with versus without modules of the SafeCare model. Outcomes were 6-year recidivism, pre/post/follow-up measures of depression and child abuse potential, and posttreatment consumer ratings of working alliance, service satisfaction, and cultural competency. Recidivism reduction among American Indian parents was found to be equivalent for cases falling within customary SafeCare inclusion criteria. When extended to cases outside customary inclusion boundaries, there was no apparent recidivism advantage or disadvantage. Contrary to concerns, SafeCare had higher consumer ratings of cultural competency, working alliance, service quality, and service benefit. Findings support using SafeCare with American Indians parents who meet customary SafeCare inclusion criteria. Findings do not support concerns in the literature that a manualized, structured, evidence-based model might be less effective or culturally unacceptable for American Indians. PMID:22927674

  2. 48 CFR 28.203-2 - Acceptability of assets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... letters of credit from a federally insured financial institution from individual sureties to satisfy the... cash equivalents with a federally insured financial institution; (2) United States Government securities at market value. (An escrow account is not required if an individual surety offers Government...

  3. Alternative Treatment Technologies – Working With the Pathogen Equivalency Committee

    EPA Science Inventory

    Under current Federal regulations (40 CFR 503), municipal sludge must be treated prior to land application. The regulations identify two classes of treatment with respect to pathogen reduction: Class B (three alternatives) which provides a minimum acceptable level of treatment;...

  4. 42 CFR 436.407 - Types of acceptable documentary evidence of citizenship.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... (including general education and high school equivalency diplomas), marriage certificates, divorce decrees... perjury by a residential care facility director or administrator on behalf of an institutionalized... State database subsequent changes in eligibility should not require repeating the documentation of...

  5. 42 CFR 436.407 - Types of acceptable documentary evidence of citizenship.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... (including general education and high school equivalency diplomas), marriage certificates, divorce decrees... perjury by a residential care facility director or administrator on behalf of an institutionalized... State database subsequent changes in eligibility should not require repeating the documentation of...

  6. A simple index of stand density for Douglas-fir.

    Treesearch

    R.O. Curtis

    1982-01-01

    The expression RD = G/(Dg½), where G is basal area and Dg is quadratic mean stand diameter, provides a simple and convenient scale of relative stand density for Douglas-fir, equivalent to other generally accepted diameter-based stand density measures.

  7. Determination of antioxidant activity in foods and beverages by reaction with 2,2'-diphenyl-1-picrylhydrazyl (DPPH): collaborative study First Action 2012.04.

    PubMed

    Plank, David W; Szpylka, John; Sapirstein, Harry; Woollard, David; Zapf, Charles M; Lee, Vong; Chen, C Y Oliver; Liu, Rui Hai; Tsao, Rong; Düsterloh, André; Baugh, Steve

    2012-01-01

    A colorimetric method for the determination of total antioxidant activity in a variety of foods and beverages was validated in both a single-laboratory validation and a collaborative laboratory validation study. The procedure involved extraction of the antioxidants directly into a methanol-water solution containing a known amount of 2,2'-diphenyl-1-picrylhydrazyl (DPPH), thus promoting the rapid reaction of extracted materials with DPPH. The reaction was monitored by spectrophotometric measurement of the absorbance loss at 517 nm. Antioxidant activity was quantified relative to a dilution series of vitamin E analog standards (Trolox), which were analyzed in parallel simultaneously with the food and beverage samples. The antioxidant activities of the samples ranged from 131 to 131 000 micromole Trolox equivalents/100 g. Statistical analysis of the results showed that nine of the 11 matrixes gave acceptable HorRat values, indicating that the method performed well in these cases. The acceptable matrixes include pomegranate juice, blueberry juice, carrot juice, green tea, wine, rosemary spice, ready-to-eat cereal, and yogurt. Two samples failed the HorRat test: the first was an almond milk that had an antioxidant level below the practical LOQ for the method; the second was a sample of canola oil with added omega-3 fatty acid that was immiscible in the reaction medium.

  8. 14 CFR 171.153 - Requests for IFR procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and maintenance manual that meets the requirement of § 171.161. (4) A statement of intention to meet... operational reliability and an acceptable standard of performance. Previous equivalent operational experience... maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and...

  9. 42 CFR 435.407 - Types of acceptable documentary evidence of citizenship.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... accredited institutions (including general education and high school equivalency diplomas), marriage... under penalty of perjury by a residential care facility director or administrator on behalf of an... documented and recorded in a State database subsequent changes in eligibility should not require repeating...

  10. 42 CFR 435.407 - Types of acceptable documentary evidence of citizenship.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... accredited institutions (including general education and high school equivalency diplomas), marriage... under penalty of perjury by a residential care facility director or administrator on behalf of an... documented and recorded in a State database subsequent changes in eligibility should not require repeating...

  11. Flavor and appearance of whole shell eggs made safe with ozone pasteurization

    PubMed Central

    Maxkwee, Esther N; Perry, Jennifer J; Lee, Ken

    2014-01-01

    Raw eggs are a potential health hazard and a new federally approved process uses ozone to maintain freshness while ensuring safety. The impact of an ozone process on the flavor, color, and shell integrity of eggs must be known for market acceptance. The visual perception and consumer acceptance of full commercial scale ozone-pasteurized eggs are reported, using a degree of liking test and a Just-About-Right analysis. Instrumental analysis of albumen turbidity, yolk color, and Haugh Units correlate with human perception. Visual tests reveal that ozone-pasteurized eggs were equivalent to thermally pasteurized eggs in attributes such as appearance, spread, and cloudiness. They were equivalent to untreated eggs in yolk height, yellowness, and appeal. There were no differences in taste among all egg treatments for measures of aroma, flavor, texture and overall liking. Ozone-pasteurized eggs have the same appeal as raw eggs, and can be cooked without flavor loss. This promising new ozone process maintains good sensory quality relative to thermal processing. PMID:25473516

  12. Dynamics of a passive micro-vibration isolator based on a pretensioned plane cable net structure and fluid damper

    NASA Astrophysics Data System (ADS)

    Chen, Yanhao; Lu, Qi; Jing, Bo; Zhang, Zhiyi

    2016-09-01

    This paper addresses dynamic modelling and experiments on a passive vibration isolator for application in the space environment. The isolator is composed of a pretensioned plane cable net structure and a fluid damper in parallel. Firstly, the frequency response function (FRF) of a single cable is analysed according to the string theory, and the FRF synthesis method is adopted to establish a dynamic model of the plane cable net structure. Secondly, the equivalent damping coefficient of the fluid damper is analysed. Thirdly, experiments are carried out to compare the plane cable net structure, the fluid damper and the vibration isolator formed by the net and the damper, respectively. It is shown that the plane cable net structure can achieve substantial vibration attenuation but has a great amplification at its resonance frequency due to the light damping of cables. The damping effect of fluid damper is acceptable without taking the poor carrying capacity into consideration. Compared to the plane cable net structure and the fluid damper, the isolator has an acceptable resonance amplification as well as vibration attenuation.

  13. 49 CFR 192.327 - Cover.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... State or municipality: (1) Establishes a minimum cover of less than 24 inches (610 millimeters); (2... accepted practices). (f) All pipe installed offshore, except in the Gulf of Mexico and its inlets, under... concrete coating, or protected by an equivalent means. (g) All pipelines installed under water in the Gulf...

  14. 49 CFR 192.327 - Cover.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... State or municipality: (1) Establishes a minimum cover of less than 24 inches (610 millimeters); (2... accepted practices). (f) All pipe installed offshore, except in the Gulf of Mexico and its inlets, under... concrete coating, or protected by an equivalent means. (g) All pipelines installed under water in the Gulf...

  15. Evaluating the Quality of Transfer versus Nontransfer Accounting Principles Grades.

    ERIC Educational Resources Information Center

    Colley, J. R.; And Others

    1996-01-01

    Using 1989-92 student records from three colleges accepting large numbers of transfers from junior schools into accounting, regression analyses compared grades of transfer and nontransfer students. Quality of accounting principle grades of transfer students was not equivalent to that of nontransfer students. (SK)

  16. Comparison of Some Secondary Body Composition Algorithms

    ERIC Educational Resources Information Center

    Sutton, Robert A.; Miller, Carolyn

    2006-01-01

    Body composition measurements vary greatly in degree of measurement difficulty and accuracy. Hydrostatic weighing, chemical dilution or their equivalents were the accepted "gold" standards for assessing fat mass. Dual Energy X-ray Absorptiometry (DEXA) is fast replacing these techniques as the preferred standard. However, these direct measurement…

  17. High temperature antigen retrieval and loss of nuclear morphology: a comparison of microwave and autoclave techniques.

    PubMed Central

    Hunt, N C; Attanoos, R; Jasani, B

    1996-01-01

    The use of high temperature antigen retrieval methods has been of major importance in increasing the diagnostic utility of immunocytochemistry. However, these techniques are not without their problems and in this report attention is drawn to a loss of nuclear morphological detail, including mitotic figures, following microwave antigen retrieval. This was not seen with an equivalent autoclave technique. This phenomenon was quantified using image analysis in a group of B cell lymphomas stained with the antibody L26. Loss of nuclear morphological detail may lead to difficulty in identifying cells accurately, which is important in the diagnostic setting-for example, when trying to distinguish a malignant lymphoid infiltrate within a mixed cell population. In such cases it would clearly be wise to consider the use of alternative high temperature retrieval methods and accept their slightly lower staining enhancement capability compared with the microwave technique. Images PMID:9038766

  18. Implementation of a Regional Virtual Tumor Board: A Prospective Study Evaluating Feasibility and Provider Acceptance

    PubMed Central

    Marshall, Christy L.; Petersen, Nancy J.; Naik, Aanand D.; Velde, Nancy Vander; Artinyan, Avo; Albo, Daniel; Berger, David H.

    2014-01-01

    Abstract Background: Tumor board (TB) conferences facilitate multidisciplinary cancer care and are associated with overall improved outcomes. Because of shortages of the oncology workforce and limited access to TB conferences, multidisciplinary care is not available at every institution. This pilot study assessed the feasibility and acceptance of using telemedicine to implement a virtual TB (VTB) program within a regional healthcare network. Materials and Methods: The VTB program was implemented through videoconference technology and electronic medical records between the Houston (TX) Veterans Affairs Medical Center (VAMC) (referral center) and the New Orleans (LA) VAMC (referring center). Feasibility was assessed as the proportion of completed VTB encounters, rate of technological failures/mishaps, and presentation duration. Validated surveys for confidence and satisfaction were administered to 36 TB participants to assess acceptance (1–5 point Likert scale). Secondary outcomes included preliminary data on VTB utilization and its effectiveness in providing access to quality cancer care within the region. Results: Ninety TB case presentations occurred during the study period, of which 14 (15%) were VTB cases. Although one VTB encounter had a technical mishap during presentation, all scheduled encounters were completed (100% completion rate). Case presentations took longer for VTB than for regular TB cases (p=0.0004). However, VTB was highly accepted with mean scores for satisfaction and confidence of 4.6. Utilization rate of VTB was 75%, and its effectiveness was equivalent to that observed for non-VTB cases. Conclusions: Implementation of VTB is feasible and highly accepted by its participants. Future studies should focus on widespread implementation and validating the effectiveness of this model. PMID:24845366

  19. Risk-adjusted clinical outcomes in patients enrolled in a bloodless program

    PubMed Central

    Frank, Steven M.; Wick, Elizabeth C.; Dezern, Amy E.; Ness, Paul M.; Wasey, Jack O.; Pippa, Andrew C.; Dackiw, Elizabeth; Resar, Linda M.S.

    2014-01-01

    BACKGROUND Although clinical outcomes have been reported for patients who do not accept allogeneic blood transfusion (ABT), many previous studies lack a control group, fail to use risk adjustment, and focus exclusively on cardiac surgery. STUDY DESIGN AND METHODS We report a risk-adjusted, propensity score–matched, retrospective case-control study of clinical outcomes for inpatients who did not accept ABT (bloodless, n = 294) and those who did accept ABT (control, n = 1157). Multidisciplinary specialized care was rendered to the bloodless patients to conserve blood and optimize clinical outcomes. Differences in hemoglobin (Hb), mortality, five morbid outcomes, and hospital charges and costs were compared. Subgroups of medical and surgical patients were analyzed, and independent predictors of outcome were determined by multivariate analysis. RESULTS Overall, mortality was lower in the bloodless group (0.7%) than in the control group (2.7%; p = 0.046), primarily attributed to the surgical subgroup. After risk adjustment, bloodless care was not an independent predictor of the composite adverse outcome (death or any morbid event; p = 0.91; odds ratio, 1.02; 95% confidence interval, 0.68–1.53). Discharge Hb concentrations were similar in the bloodless (10.8 ± 2.7 g/dL) and control (10.9 ± 2.3 g/dL) groups (p = 0.42). Total and direct hospital costs were 12% (p = 0.02) and 18% (p = 0.02) less, respectively, in the bloodless patients, a difference attributed to the surgical subgroup. CONCLUSIONS Using appropriate blood conservation measures for patients who do not accept ABT results in similar or better outcomes and is associated with equivalent or lower costs. This specialized care may be beneficial even for those patients who accept ABT. PMID:24942198

  20. Methodology for worker neutron exposure evaluation in the PDCF facility design.

    PubMed

    Scherpelz, R I; Traub, R J; Pryor, K H

    2004-01-01

    A project headed by Washington Group International is meant to design the Pit Disassembly and Conversion Facility (PDCF) to convert the plutonium pits from excessed nuclear weapons into plutonium oxide for ultimate disposition. Battelle staff are performing the shielding calculations that will determine appropriate shielding so that the facility workers will not exceed target exposure levels. The target exposure levels for workers in the facility are 5 mSv y(-1) for the whole body and 100 mSv y(-1) for the extremity, which presents a significant challenge to the designers of a facility that will process tons of radioactive material. The design effort depended on shielding calculations to determine appropriate thickness and composition for glove box walls, and concrete wall thicknesses for storage vaults. Pacific Northwest National Laboratory (PNNL) staff used ORIGEN-S and SOURCES to generate gamma and neutron source terms, and Monte Carlo (computer code for) neutron photon (transport) (MCNP-4C) to calculate the radiation transport in the facility. The shielding calculations were performed by a team of four scientists, so it was necessary to develop a consistent methodology. There was also a requirement for the study to be cost-effective, so efficient methods of evaluation were required. The calculations were subject to rigorous scrutiny by internal and external reviewers, so acceptability was a major feature of the methodology. Some of the issues addressed in the development of the methodology included selecting appropriate dose factors, developing a method for handling extremity doses, adopting an efficient method for evaluating effective dose equivalent in a non-uniform radiation field, modelling the reinforcing steel in concrete, and modularising the geometry descriptions for efficiency. The relative importance of the neutron dose equivalent compared with the gamma dose equivalent varied substantially depending on the specific shielding conditions and lessons were learned from this effect. This paper addresses these issues and the resulting methodology.

  1. Emergency medical technician-performed point-of-care blood analysis using the capillary blood obtained from skin puncture.

    PubMed

    Kim, Changsun; Kim, Hansol

    2017-12-09

    Comparing a point-of-care (POC) test using the capillary blood obtained from skin puncture with conventional laboratory tests. In this study, which was conducted at the emergency department of a tertiary care hospital in April-July 2017, 232 patients were enrolled, and three types of blood samples (capillary blood from skin puncture, arterial and venous blood from blood vessel puncture) were simultaneously collected. Each blood sample was analyzed using a POC analyzer (epoc® system, USA), an arterial blood gas analyzer (pHOx®Ultra, Nova biomedical, USA) and venous blood analyzers (AU5800, DxH2401, Beckman Coulter, USA). Twelve parameters were compared between the epoc and reference analyzers, with an equivalence test, Bland-Altman plot analysis and linear regression employed to show the agreement or correlation between the two methods. The pH, HCO 3 , Ca 2+ , Na + , K + , Cl - , glucose, Hb and Hct measured by the epoc were equivalent to the reference values (95% confidence interval of mean difference within the range of the agreement target) with clinically inconsequential mean differences and narrow limits of agreement. All of them, except pH, had clinically acceptable agreements between the two methods (results within target value ≥80%). Of the remaining three parameters (pCO 2, pO 2 and lactate), the epoc pCO 2 and lactate values were highly correlated with the reference device values, whereas pO 2 was not. (pCO 2 : R 2 =0.824, y=-1.411+0.877·x; lactate: R 2 =0.902, y=-0.544+0.966·x; pO 2 : R 2 =0.037, y=61.6+0.431·x). Most parameters, except only pO 2 , measured by the epoc were equivalent to or correlated with those from the reference method. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. The use of electronic games in therapy: a review with clinical implications.

    PubMed

    Horne-Moyer, H Lynn; Moyer, Brian H; Messer, Drew C; Messer, Elizabeth S

    2014-12-01

    Therapists and patients enjoy and benefit from interventions that use electronic games (EG) in health care and mental health settings, with a variety of diagnoses and therapeutic goals. We reviewed the use of electronic games designed specifically for a therapeutic purpose, electronic games for psychotherapy (EGP), also called serious games, and commercially produced games used as an adjunct to psychotherapy, electronic games for entertainment (EGE). Recent research on the benefits of EG in rehabilitation settings, EGP, and EGE indicates that electronic methods are often equivalent to more traditional treatments and may be more enjoyable or acceptable, at least to some consumers. Methodological concerns include the lack of randomized controlled trials (RCT) for many applications. Suggestions are offered for using EG in therapeutic practice.

  3. 40 CFR Table E-1 to Subpart E of... - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5 E Table E-1 to Subpart E of Part 53... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM2.5 or PM10â2.5 Pt. 53...

  4. A High Throughput Method for Measuring Polycyclic Aromatic Hydrocarbons in Seafood Using QuEChERS Extraction and SBSE.

    PubMed

    Pfannkoch, Edward A; Stuff, John R; Whitecavage, Jacqueline A; Blevins, John M; Seely, Kathryn A; Moran, Jeffery H

    2015-01-01

    National Oceanic and Atmospheric Administration (NOAA) Method NMFS-NWFSC-59 2004 is currently used to quantitatively analyze seafood for polycyclic aromatic hydrocarbon (PAH) contamination, especially following events such as the Deepwater Horizon oil rig explosion that released millions of barrels of crude oil into the Gulf of Mexico. This method has limited throughput capacity; hence, alternative methods are necessary to meet analytical demands after such events. Stir bar sorptive extraction (SBSE) is an effective technique to extract trace PAHs in water and the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction strategy effectively extracts PAHs from complex food matrices. This study uses SBSE to concentrate PAHs and eliminate matrix interference from QuEChERS extracts of seafood, specifically oysters, fish, and shrimp. This method provides acceptable recovery (65-138%) linear calibrations and is sensitive (LOD = 0.02 ppb, LOQ = 0.06 ppb) while providing higher throughput and maintaining equivalency between NOAA 2004 as determined by analysis of NIST SRM 1974b mussel tissue.

  5. Effect-based trigger values for in vitro and in vivo bioassays performed on surface water extracts supporting the environmental quality standards (EQS) of the European Water Framework Directive.

    PubMed

    Escher, Beate I; Aїt-Aїssa, Selim; Behnisch, Peter A; Brack, Werner; Brion, François; Brouwer, Abraham; Buchinger, Sebastian; Crawford, Sarah E; Du Pasquier, David; Hamers, Timo; Hettwer, Karina; Hilscherová, Klára; Hollert, Henner; Kase, Robert; Kienle, Cornelia; Tindall, Andrew J; Tuerk, Jochen; van der Oost, Ron; Vermeirssen, Etienne; Neale, Peta A

    2018-07-01

    Effect-based methods including cell-based bioassays, reporter gene assays and whole-organism assays have been applied for decades in water quality monitoring and testing of enriched solid-phase extracts. There is no common EU-wide agreement on what level of bioassay response in water extracts is acceptable. At present, bioassay results are only benchmarked against each other but not against a consented measure of chemical water quality. The EU environmental quality standards (EQS) differentiate between acceptable and unacceptable surface water concentrations for individual chemicals but cannot capture the thousands of chemicals in water and their biological action as mixtures. We developed a method that reads across from existing EQS and includes additional mixture considerations with the goal that the derived effect-based trigger values (EBT) indicate acceptable risk for complex mixtures as they occur in surface water. Advantages and limitations of various approaches to read across from EQS are discussed and distilled to an algorithm that translates EQS into their corresponding bioanalytical equivalent concentrations (BEQ). The proposed EBT derivation method was applied to 48 in vitro bioassays with 32 of them having sufficient information to yield preliminary EBTs. To assess the practicability and robustness of the proposed approach, we compared the tentative EBTs with observed environmental effects. The proposed method only gives guidance on how to derive EBTs but does not propose final EBTs for implementation. The EBTs for some bioassays such as those for estrogenicity are already mature and could be implemented into regulation in the near future, while for others it will still take a few iterations until we can be confident of the power of the proposed EBTs to differentiate good from poor water quality with respect to chemical contamination. Copyright © 2018 Elsevier B.V. All rights reserved.

  6. Translation and cross-cultural adaptation of the Detailed Assessment of Speed of Handwriting 17+ to Brazilian Portuguese: conceptual, item and semantic equivalence.

    PubMed

    Cardoso, Monique Herrera; Capellini, Simone Aparecida

    2018-02-19

    Perform a cross-cultural adaptation of the Detailed Assessment of Speed of Handwriting 17+ (DASH 17+) for Brazilians. Evaluation of (1) conceptual, item and (2) semantic equivalence, with assistance of four translators and application of a pilot study to 36 students. (1) The concepts and items are equivalent in the British and Brazilian cultures. (2) Adaptations were made concerning the English language pangram used in copying tasks and selection of the lower-case, cursive handwriting in the alphabet-writing task. Application of the pilot study verified acceptability and understanding of the proposed tasks by the students. The Brazilian Portuguese version of the DASH 17+ was presented after finalization of the conceptual, item and semantic equivalence of the instrument. Further studies on psychometric properties should be conducted with the purpose of measuring the speed of handwriting in youngsters and adults with greater reliability and validity to the procedure.

  7. TECHNOLOGIES FORM MONITORING AND ...

    EPA Pesticide Factsheets

    A demonstration of technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under EPA's Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in April 2004. This report describes the evaluation of Wako Pure Chemical Industries's Dioxin ELISA Kit. The kit is an immunoassay technique that reports toxicity equivalents (TEQ) of dioxin/furans. The sample units are in pg/g 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents (EQ). The technology results were compared to high resolution mass spectrometry (HRMS) TEQ results generated using EPA Method 1613B.The Wako results were biased both positively and negatively relative to HRMS results. The technologys estimated method detection limit was 83-201 pg/g 2,3,7,8-TCDD EQ, but this should be considered a rough estimate. Results from this demonstration suggest that the Wako kit could be an effective screening tool for determining sample results above and below 20 pg/g TEQ, and even more effective as a screen for samples above and below 50 pg/g TEQ, particularly considering the cost to analyze the 209 demonstration samples was significantly less than that of the reference laboratory ($150,294 vs. $213,580), and all samples were analyzed on-site in 9 days (in comparison to the reference laboratory which took 8 months). The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented per

  8. 46 CFR 160.133-7 - Design, construction, and performance of release mechanisms.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

  9. 46 CFR 160.133-7 - Design, construction, and performance of release mechanisms.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

  10. 14 CFR 171.305 - Requests for IFR procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... maintenance manual that meets the requirements of § 171.325. (4) A statement of intent to meet the... reliability and an acceptable standard of performance. Previous equivalent operational experience with a... results, and of any required changes in the MLS facility or in the maintenance manual or maintenance...

  11. 14 CFR 171.43 - Requests for IFR procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... organization and a maintenance manual that meets the requirements of § 171.51. (4) A statement of intent to... operational reliability and an acceptable standard of performance. Previous equivalent operational experience... owner of the results and of any required changes in the facility or the maintenance manual or...

  12. 26 CFR 1.6038A-3 - Record maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... control RC and the two corporations do not constitute a group of “controlled taxpayers” for purposes of... party does not control. Functional equivalents of the specified documents are acceptable. Record.... If, however, on audit it is determined that F does control RC, all records relevant to determining...

  13. 40 CFR 63.5170 - How do I demonstrate compliance with the standards?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... for individual or groups of coil coating lines; or overall organic HAP control efficiency is at least... compliant coatings and control devices and maintaining an acceptable equivalent emission rate Average... facility. (6) Control efficiency calculation of HAP emitted. For each work station or group of work...

  14. 26 CFR 1.6038A-3 - Record maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... control RC and the two corporations do not constitute a group of “controlled taxpayers” for purposes of... party does not control. Functional equivalents of the specified documents are acceptable. Record.... If, however, on audit it is determined that F does control RC, all records relevant to determining...

  15. 40 CFR 63.5170 - How do I demonstrate compliance with the standards?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for individual or groups of coil coating lines; or overall organic HAP control efficiency is at least... compliant coatings and control devices and maintaining an acceptable equivalent emission rate Average... facility. (6) Control efficiency calculation of HAP emitted. For each work station or group of work...

  16. CONCEPTUAL BASIS FOR NATURAL ATTENUATION (NA) AS REMEDIATION APPROACH

    EPA Science Inventory

    As used in enforcement actions at hazardous waste sites by U.S. EPA, monitored natural attenuation is a remedy fully equivalent to any other remedy. The acceptance of MNA is based on three lines of evidence: historical ground water and/or soil chemistry data that demonstrates a ...

  17. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  18. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  19. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  20. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  1. Parents' Use of Physical Interventions in the Management of Their Children's Severe Challenging Behaviour

    ERIC Educational Resources Information Center

    Allen, David; Hawkins, Sarah; Cooper, Viv

    2006-01-01

    Background: Although training staff supporting people with challenging behaviour in physical interventions has become accepted practice, parents are often left to fend for themselves while managing equivalent behaviours. The study explores parents' experience of managing severe challenging behaviours, their use of physical interventions and access…

  2. Equivalency of Computer-based and Paper-and-pencil Testing.

    ERIC Educational Resources Information Center

    DeAngelis, Susan

    2000-01-01

    Dental hygiene students (n=15) took a first examination on computer then paper; 15 others took the paper test first. Computer test scores were higher than paper for the first exam. Student acceptance of the computer format was mixed. Computer exams reduced scoring and grade reporting time. (SK)

  3. 30 CFR 7.308 - Lockwasher equivalency test.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

  4. 30 CFR 7.308 - Lockwasher equivalency test.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

  5. 30 CFR 7.308 - Lockwasher equivalency test.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

  6. 30 CFR 7.308 - Lockwasher equivalency test.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

  7. 30 CFR 7.308 - Lockwasher equivalency test.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

  8. 5 CFR 531.404 - Earning within-grade increase.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) upon meeting the following three requirements established by law: (a) The employee's performance must be at an acceptable level of competence, as defined in this subpart. To be determined at an... chapter) shall be at least Level 3 (“Fully Successful” or equivalent). (1) When a within-grade increase...

  9. 42 CFR 457.431 - Actuarial report for benchmark-equivalent coverage.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...— (1) By an individual who is a member of the American Academy of Actuaries; (2) Using generally accepted actuarial principles and methodologies of the American Academy of Actuaries; (3) Using a... coverage. (c) The actuary who prepares the opinion must select and specify the standardized set and...

  10. The relationship between instrumental leaf grade and Shirley Analyzer trash content in cotton lint

    USDA-ARS?s Scientific Manuscript database

    With the increasing acceptance of high volume instrument (HVITM) instrumental leaf grade index in both domestic and international trading, there is a continued interest in the relationship between instrumental leaf grade and equivalent trash gravimetric content (% percent by mass) from cotton custom...

  11. Periodic equivalence ratio modulation method and apparatus for controlling combustion instability

    DOEpatents

    Richards, George A.; Janus, Michael C.; Griffith, Richard A.

    2000-01-01

    The periodic equivalence ratio modulation (PERM) method and apparatus significantly reduces and/or eliminates unstable conditions within a combustion chamber. The method involves modulating the equivalence ratio for the combustion device, such that the combustion device periodically operates outside of an identified unstable oscillation region. The equivalence ratio is modulated between preselected reference points, according to the shape of the oscillation region and operating parameters of the system. Preferably, the equivalence ratio is modulated from a first stable condition to a second stable condition, and, alternatively, the equivalence ratio is modulated from a stable condition to an unstable condition. The method is further applicable to multi-nozzle combustor designs, whereby individual nozzles are alternately modulated from stable to unstable conditions. Periodic equivalence ratio modulation (PERM) is accomplished by active control involving periodic, low frequency fuel modulation, whereby low frequency fuel pulses are injected into the main fuel delivery. Importantly, the fuel pulses are injected at a rate so as not to affect the desired time-average equivalence ratio for the combustion device.

  12. Radiation dose equivalent to stowaways in vehicles.

    PubMed

    Khan, Siraj M; Nicholas, Paul E; Terpilak, Michael S

    2004-05-01

    The U.S. Bureau of Customs and Border Protection has deployed a large number of non-intrusive inspection (NII) systems at land border crossings and seaports throughout the United States to inspect cars, trucks, and sea containers. These NII systems use x rays and gamma rays for the detection of contraband. Unfortunately, undocumented aliens infrequently stow away in these same conveyances to illegally enter the United States. It is extremely important that the radiation dose equivalent imparted to these stowaways be within acceptable limits. This paper discusses the issues involved and describes a protocol the U.S. Bureau of Customs and Border Protection has used in a study to measure and document these levels. The results of this study show that the radiation dose equivalent to the stowaways from the deployed NII systems is negligibly small and does not pose a health hazard.

  13. Should non-disclosures be considered as morally equivalent to lies within the doctor–patient relationship?

    PubMed Central

    Cox, Caitriona L; Fritz, Zoe

    2016-01-01

    In modern practice, doctors who outright lie to their patients are often condemned, yet those who employ non-lying deceptions tend to be judged less critically. Some areas of non-disclosure have recently been challenged: not telling patients about resuscitation decisions; inadequately informing patients about risks of alternative procedures and withholding information about medical errors. Despite this, there remain many areas of clinical practice where non-disclosures of information are accepted, where lies about such information would not be. Using illustrative hypothetical situations, all based on common clinical practice, we explore the extent to which we should consider other deceptive practices in medicine to be morally equivalent to lying. We suggest that there is no significant moral difference between lying to a patient and intentionally withholding relevant information: non-disclosures could be subjected to Bok's ‘Test of Publicity’ to assess permissibility in the same way that lies are. The moral equivalence of lying and relevant non-disclosure is particularly compelling when the agent's motivations, and the consequences of the actions (from the patient's perspectives), are the same. We conclude that it is arbitrary to claim that there is anything inherently worse about lying to a patient to mislead them than intentionally deceiving them using other methods, such as euphemism or non-disclosure. We should question our intuition that non-lying deceptive practices in clinical practice are more permissible and should thus subject non-disclosures to the same scrutiny we afford to lies. PMID:27451425

  14. Localization of heart vectors produced by epicardial burns and ectopic stimuli; validation of a dipole ranging method.

    PubMed

    Ideker, R E; Bandura, J P; Larsen, R A; Cox, J W; Keller, F W; Brody, D A

    1975-01-01

    Location of the equivalent cardiac dipole has been estimated but not fully verified in several laboratories. To test the accuracy of such a procedure, injury vectors were produced in 14 isolated, perfused rabbit hearts by epicardial searing. Strongly dipolar excitation fronts were produced in 6 additional hearts by left ventricular pacing. Twenty computer-processed signals, derived from surface electrodes on a spherical electrolyte-filled tank containing the test preparation, were optimally fitted with a locatable cardiac dipole that accounted for over 99% of the root-mean-square surface potential. For the 14 burns (mean radius 5.0 mm), the S-T injury dipole was located 3.4 plus or minus 0.7 (SD) mm from the burn center. For the 6 paced hearts, the dipole early in the ectopic beat was located 3.7 mm (range 2.6 to 4.6 mm) from the stimulating electrode. Phase inhomogeneities within the chamber appeared to have a small but predictable effect on dipole site determination. The study demonstrates that equivalent dipole location can be determined with acceptable accuracy from potential measurements of the external cardiac field.

  15. A Prospective Evaluation of Helical Tomotherapy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bauman, Glenn; Yartsev, Slav; Rodrigues, George

    2007-06-01

    Purpose: To report results from two clinical trials evaluating helical tomotherapy (HT). Methods and Materials: Patients were enrolled in one of two prospective trials of HT (one for palliative and one for radical treatment). Both an HT plan and a companion three-dimensional conformal radiotherapy (3D-CRT) plan were generated. Pretreatment megavoltage computed tomography was used for daily image guidance. Results: From September 2004 to January 2006, a total of 61 sites in 60 patients were treated. In all but one case, a clinically acceptable tomotherapy plan for treatment was generated. Helical tomotherapy plans were subjectively equivalent or superior to 3D-CRT inmore » 95% of plans. Helical tomotherapy was deemed equivalent or superior in two thirds of dose-volume point comparisons. In cases of inferiority, differences were either clinically insignificant and/or reflected deliberate tradeoffs to optimize the HT plan. Overall imaging and treatment time (median) was 27 min (range, 16-91 min). According to a patient questionnaire, 78% of patients were satisfied to very satisfied with the treatment process. Conclusions: Helical tomotherapy demonstrated clear advantages over conventional 3D-CRT in this diverse patient group. The prospective trials were helpful in deploying this technology in a busy clinical setting.« less

  16. Acceptability of hypothetical dengue vaccines among travelers.

    PubMed

    Benoit, Christine M; MacLeod, William B; Hamer, Davidson H; Sanchez-Vegas, Carolina; Chen, Lin H; Wilson, Mary E; Karchmer, Adolf W; Yanni, Emad; Hochberg, Natasha S; Ooi, Winnie W; Kogelman, Laura; Barnett, Elizabeth D

    2013-01-01

    Dengue viruses have spread widely in recent decades and cause tens of millions of infections mostly in tropical and subtropical areas. Vaccine candidates are being studied aggressively and may be ready for licensure soon. We surveyed patients with past or upcoming travel to dengue-endemic countries to assess rates and determinants of acceptance for four hypothetical dengue vaccines with variable efficacy and adverse event (AE) profiles. Acceptance ratios were calculated for vaccines with varied efficacy and AE risk. Acceptance of the four hypothetical vaccines ranged from 54% for the vaccine with lower efficacy and serious AE risk to 95% for the vaccine with higher efficacy and minor AE risk. Given equal efficacy, vaccines with lower AE risk were better accepted than those with higher AE risk; given equivalent AE risk, vaccines with higher efficacy were better accepted than those with lower efficacy. History of Japanese encephalitis vaccination was associated with lower vaccine acceptance for one of the hypothetical vaccines. US-born travelers were more likely than non-US born travelers to accept a vaccine with 75% efficacy and a risk of minor AEs (p = 0.003). Compared with North American-born travelers, Asian- and African-born travelers were less likely to accept both vaccines with 75% efficacy. Most travelers would accept a safe and efficacious dengue vaccine if one were available. Travelers valued fewer potential AEs over increased vaccine efficacy. © 2013 International Society of Travel Medicine.

  17. The application of Gaussian mixture models for signal quantification in MALDI-TOF mass spectrometry of peptides.

    PubMed

    Spainhour, John Christian G; Janech, Michael G; Schwacke, John H; Velez, Juan Carlos Q; Ramakrishnan, Viswanathan

    2014-01-01

    Matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) coupled with stable isotope standards (SIS) has been used to quantify native peptides. This peptide quantification by MALDI-TOF approach has difficulties quantifying samples containing peptides with ion currents in overlapping spectra. In these overlapping spectra the currents sum together, which modify the peak heights and make normal SIS estimation problematic. An approach using Gaussian mixtures based on known physical constants to model the isotopic cluster of a known compound is proposed here. The characteristics of this approach are examined for single and overlapping compounds. The approach is compared to two commonly used SIS quantification methods for single compound, namely Peak Intensity method and Riemann sum area under the curve (AUC) method. For studying the characteristics of the Gaussian mixture method, Angiotensin II, Angiotensin-2-10, and Angiotenisn-1-9 and their associated SIS peptides were used. The findings suggest, Gaussian mixture method has similar characteristics as the two methods compared for estimating the quantity of isolated isotopic clusters for single compounds. All three methods were tested using MALDI-TOF mass spectra collected for peptides of the renin-angiotensin system. The Gaussian mixture method accurately estimated the native to labeled ratio of several isolated angiotensin peptides (5.2% error in ratio estimation) with similar estimation errors to those calculated using peak intensity and Riemann sum AUC methods (5.9% and 7.7%, respectively). For overlapping angiotensin peptides, (where the other two methods are not applicable) the estimation error of the Gaussian mixture was 6.8%, which is within the acceptable range. In summary, for single compounds the Gaussian mixture method is equivalent or marginally superior compared to the existing methods of peptide quantification and is capable of quantifying overlapping (convolved) peptides within the acceptable margin of error.

  18. Examination of the equivalence of self-report survey-based paper-and-pencil and internet data collection methods.

    PubMed

    Weigold, Arne; Weigold, Ingrid K; Russell, Elizabeth J

    2013-03-01

    Self-report survey-based data collection is increasingly carried out using the Internet, as opposed to the traditional paper-and-pencil method. However, previous research on the equivalence of these methods has yielded inconsistent findings. This may be due to methodological and statistical issues present in much of the literature, such as nonequivalent samples in different conditions due to recruitment, participant self-selection to conditions, and data collection procedures, as well as incomplete or inappropriate statistical procedures for examining equivalence. We conducted 2 studies examining the equivalence of paper-and-pencil and Internet data collection that accounted for these issues. In both studies, we used measures of personality, social desirability, and computer self-efficacy, and, in Study 2, we used personal growth initiative to assess quantitative equivalence (i.e., mean equivalence), qualitative equivalence (i.e., internal consistency and intercorrelations), and auxiliary equivalence (i.e., response rates, missing data, completion time, and comfort completing questionnaires using paper-and-pencil and the Internet). Study 1 investigated the effects of completing surveys via paper-and-pencil or the Internet in both traditional (i.e., lab) and natural (i.e., take-home) settings. Results indicated equivalence across conditions, except for auxiliary equivalence aspects of missing data and completion time. Study 2 examined mailed paper-and-pencil and Internet surveys without contact between experimenter and participants. Results indicated equivalence between conditions, except for auxiliary equivalence aspects of response rate for providing an address and completion time. Overall, the findings show that paper-and-pencil and Internet data collection methods are generally equivalent, particularly for quantitative and qualitative equivalence, with nonequivalence only for some aspects of auxiliary equivalence. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  19. 40 CFR 53.11 - Cancellation of reference or equivalent method designation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Cancellation of reference or equivalent method designation. 53.11 Section 53.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS General...

  20. A re-examination of the metabolic equivalent concept in individuals with coronary heart disease.

    PubMed

    Savage, Patrick D; Toth, Michael J; Ades, Philip A

    2007-01-01

    The metabolic equivalent (MET) is a commonly used method of quantifying the energy cost and intensity of physical activity. Recent studies have questioned the accuracy of the well-accepted value of a MET of 3.5 mL O2.kg(-1).min(-1). The goal of the present study was to compare the traditionally accepted value for 1 MET to direct measures of resting metabolic rate in a group of stable individuals with coronary heart disease (CHD). The primary cohort consisted of 109 (60 men and 49 women) subjects with documented coronary heart disease and a body mass index >or=25 kg/m2. Measurements included indirect calorimetry, body composition, and exercise capacity (peak oxygen uptake [VO2]). In a substudy of 17 (10 men, 7 women) normal weight subjects (body mass index <25 kg/m2), metabolic rate in the seated position was also measured. Mean resting value for 1 MET was a VO2 value of 2.58 +/- 0.4 mL O2.kg(-1).min(-1) for overweight subjects measured in the supine position and 2.84 +/- 0.59 mL O2.kg(-1).min(-1) for normal weight individuals measured in the seated position. Caloric expenditure value was 0.74 +/- 0.12 kcal.kg(-1).h(-1) rather than the expected value of 1 kcal.kg(-1).h(-1). Values were similar between men and women. Women on beta-blockers had a lower resting metabolic rate (2.47 +/- 0.27 vs. 2.71 +/- 0.38 mL O2.kg(-1).min(-1)) (P < .05) than women not on beta-blocker therapy, whereas there was no effect of beta-blockers in men. Findings confirm recent studies of otherwise healthy individuals and indicate that the average resting metabolic rate in subjects with coronary heart disease is 23% to 36% lower than the widely accepted value of 3.5 mL O2.kg(-1).min(-1). Results demonstrate the limitation of the convention of expressing energy expenditure in multiples of an assumed constant.

  1. The measure of treatment agreement between portable and laboratory blood gas measurements in guiding protocol-driven ventilator management.

    PubMed

    Thomas, Frank O; Hoffman, Terri L; Handrahan, Diana L; Crapo, Robert O; Snow, Greg

    2009-08-01

    Portable blood gas analyzer and monitor devices are increasingly being used to direct ventilator therapy. The purpose of this study was to evaluate the "measure of treatment agreement" between portable and laboratory blood gas measurements used in guiding protocol-driven ventilator management. Using National Institutes of Health Acute Respiratory Distress Syndrome network ventilator management guidelines to manage patient care, measurements taken from the Nonin 8500 M pulse oximeter (SpO2), the Novametrix-610 end-tidal CO2 (ETCO2) detector, and the i-STAT 1 (SaO2, PO2, pH, PCO2) were compared with the recommended treatment from paired laboratory ABL-725 (SaCO2, PO2, pH, PCO2) measurements. Four hundred forty-six intubated adult intensive care unit patients were studied prospectively. Except for the ETCO2 (R2 = 0.460), correlation coefficients between portable and laboratory measurements were high (R2 > or = 0.755). Testing for equivalence, the Nonin-SpO2, iSTAT-PO2, iSTAT-pH, and iSTAT-PCO2 were deemed "equivalent" surrogates to paired ABL measurements. Testing for the limits of agreement found only the iSTAT-PCO2 to be an acceptable surrogate measurement. The measure of treatment agreement between the portable and paired laboratory blood gas measurements were Nonin-SpO2 (68%), iSTAT-SaO2 (73%), iSTAT-PO2 (97%), iSTAT-pH (88%), iSTAT-PCO2 (95%), and Novametrix-ETCO2 (60%). Only the iSTAT-PO2 and the iSTAT-PCO2 achieved the > or =95% treatment agreement threshold to be considered as acceptable surrogates to laboratory measurements. : The iSTAT-PO2 and -PCO2 were portable device measurements acceptable as surrogates to standard clinical laboratory blood gas measurements in guiding protocol-directed ventilator management. The "measure of treatment agreement," based on standardized decisions and measurement thresholds of a protocol, provides a simple method for assessing clinical validity of surrogate measurements.

  2. Commissioning and initial acceptance tests for a commercial convolution dose calculation algorithm for radiotherapy treatment planning in comparison with Monte Carlo simulation and measurement

    PubMed Central

    Moradi, Farhad; Mahdavi, Seyed Rabi; Mostaar, Ahmad; Motamedi, Mohsen

    2012-01-01

    In this study the commissioning of a dose calculation algorithm in a currently used treatment planning system was performed and the calculation accuracy of two available methods in the treatment planning system i.e., collapsed cone convolution (CCC) and equivalent tissue air ratio (ETAR) was verified in tissue heterogeneities. For this purpose an inhomogeneous phantom (IMRT thorax phantom) was used and dose curves obtained by the TPS (treatment planning system) were compared with experimental measurements and Monte Carlo (MCNP code) simulation. Dose measurements were performed by using EDR2 radiographic films within the phantom. Dose difference (DD) between experimental results and two calculation methods was obtained. Results indicate maximum difference of 12% in the lung and 3% in the bone tissue of the phantom between two methods and the CCC algorithm shows more accurate depth dose curves in tissue heterogeneities. Simulation results show the accurate dose estimation by MCNP4C in soft tissue region of the phantom and also better results than ETAR method in bone and lung tissues. PMID:22973081

  3. 40 CFR 53.14 - Modification of a reference or equivalent method.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Modification of a reference or equivalent method. 53.14 Section 53.14 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS General Provisions...

  4. 40 CFR 53.8 - Designation of reference and equivalent methods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Designation of reference and equivalent methods. 53.8 Section 53.8 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS General Provisions § 53.8...

  5. Calculation of reaction forces in the boiler supports using the method of equivalent stiffness of membrane wall.

    PubMed

    Sertić, Josip; Kozak, Dražan; Samardžić, Ivan

    2014-01-01

    The values of reaction forces in the boiler supports are the basis for the dimensioning of bearing steel structure of steam boiler. In this paper, the application of the method of equivalent stiffness of membrane wall is proposed for the calculation of reaction forces. The method of equalizing displacement, as the method of homogenization of membrane wall stiffness, was applied. On the example of "Milano" boiler, using the finite element method, the calculation of reactions in the supports for the real geometry discretized by the shell finite element was made. The second calculation was performed with the assumption of ideal stiffness of membrane walls and the third using the method of equivalent stiffness of membrane wall. In the third case, the membrane walls are approximated by the equivalent orthotropic plate. The approximation of membrane wall stiffness is achieved using the elasticity matrix of equivalent orthotropic plate at the level of finite element. The obtained results were compared, and the advantages of using the method of equivalent stiffness of membrane wall for the calculation of reactions in the boiler supports were emphasized.

  6. 46 CFR 160.170-7 - Design, construction, and performance of automatic release mechanisms.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

  7. 46 CFR 160.170-7 - Design, construction, and performance of automatic release mechanisms.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

  8. 46 CFR 160.170-7 - Design, construction, and performance of automatic release mechanisms.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

  9. 40 CFR 63.5170 - How do I demonstrate compliance with the standards?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... percent on a monthly basis for individual or groups of coil coating lines; or overall organic HAP control... combination of compliant coatings and control devices and maintaining an acceptable equivalent emission rate... facility. (6) Control efficiency calculation of HAP emitted. For each work station or group of work...

  10. 40 CFR 63.5170 - How do I demonstrate compliance with the standards?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... percent on a monthly basis for individual or groups of coil coating lines; or overall organic HAP control... combination of compliant coatings and control devices and maintaining an acceptable equivalent emission rate... facility. (6) Control efficiency calculation of HAP emitted. For each work station or group of work...

  11. 40 CFR 63.5170 - How do I demonstrate compliance with the standards?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... percent on a monthly basis for individual or groups of coil coating lines; or overall organic HAP control... combination of compliant coatings and control devices and maintaining an acceptable equivalent emission rate... facility. (6) Control efficiency calculation of HAP emitted. For each work station or group of work...

  12. 13 CFR 107.50 - Definition of terms.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... otherwise, are under the Control of one group or Person. Two or more Licensees are presumed to be under... banking firm acceptable to SBA stating that the non-rated debt instrument is equivalent in risk to the..., employee or agent of a Corporate Licensee; (ii) A Control Person, employee or agent of a Partnership...

  13. The State of Early Childhood Higher Education in Nebraska. Technical Report

    ERIC Educational Resources Information Center

    Sakai, Laura; Austin, Lea J. E.; Bloechliger, Olivia; Whitebook, Marcy; Amanta, Felippa

    2015-01-01

    Teacher preparation in the field of early childhood education (ECE) has historically included a variety of higher education degree programs, in various child-related disciplines, all of which have generally been considered equally acceptable. And too often, these highly diverse degree programs are assumed to produce equivalent results (Maxwell,…

  14. The State of Early Childhood Higher Education in California. Technical Report

    ERIC Educational Resources Information Center

    Austin, Lea J. E.; Kipnis, Fran; Whitebook, Marcy; Sakai, Laura

    2015-01-01

    Teacher preparation in the field of early childhood education (ECE) has historically included a variety of higher education degree programs, in various child-related disciplines, all of which have generally been considered equally acceptable. And too often, these highly diverse degree programs are assumed to produce equivalent results. In…

  15. 76 FR 77939 - Proposed Provision of Navigation Services for the Next Generation Air Transportation System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-15

    ... navigation for en route through non-precision instrument approaches. GPS is an internationally accepted... Localizer Performance with Vertical guidance (LPV). These approaches are equivalent to Category I ILS, but... approach procedures with LPV or localizer performance (LP) non-precision lines of minima to all qualified...

  16. 45 CFR 2400.43 - Required courses of graduate study.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... study. (a) To be acceptable to the Foundation, those courses related to the Constitution referred to in... study of topics directly related to the United States Constitution. More than 12 semester hours or their... minimum of 12 semester hours or their credit hour equivalent of study of the United States Constitution...

  17. 33 CFR 157.122 - Piping, valves, and fittings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels Design, Equipment, and Installation § 157..., valves, and fittings of each COW system must: (1) Meet 46 CFR part 56; and (2) Be of steel or an equivalent material accepted by the Commandant. (b) The piping of each COW system must be permanently...

  18. Performance of the AOAC use-dilution method with targeted modifications: collaborative study.

    PubMed

    Tomasino, Stephen F; Parker, Albert E; Hamilton, Martin A; Hamilton, Gordon C

    2012-01-01

    The U.S. Environmental Protection Agency (EPA), in collaboration with an industry work group, spearheaded a collaborative study designed to further enhance the AOAC use-dilution method (UDM). Based on feedback from laboratories that routinely conduct the UDM, improvements to the test culture preparation steps were prioritized. A set of modifications, largely based on culturing the test microbes on agar as specified in the AOAC hard surface carrier test method, were evaluated in a five-laboratory trial. The modifications targeted the preparation of the Pseudomonas aeruginosa test culture due to the difficulty in separating the pellicle from the broth in the current UDM. The proposed modifications (i.e., the modified UDM) were compared to the current UDM methodology for P. aeruginosa and Staphylococcus aureus. Salmonella choleraesuis was not included in the study. The goal was to determine if the modifications reduced method variability. Three efficacy response variables were statistically analyzed: the number of positive carriers, the log reduction, and the pass/fail outcome. The scope of the collaborative study was limited to testing one liquid disinfectant (an EPA-registered quaternary ammonium product) at two levels of presumed product efficacies, high and low. Test conditions included use of 400 ppm hard water as the product diluent and a 5% organic soil load (horse serum) added to the inoculum. Unfortunately, the study failed to support the adoption of the major modification (use of an agar-based approach to grow the test cultures) based on an analysis of method's variability. The repeatability and reproducibility standard deviations for the modified method were equal to or greater than those for the current method across the various test variables. However, the authors propose retaining the frozen stock preparation step of the modified method, and based on the statistical equivalency of the control log densities, support its adoption as a procedural change to the current UDM. The current UDM displayed acceptable responsiveness to changes in product efficacy; acceptable repeatability across multiple tests in each laboratory for the control counts and log reductions; and acceptable reproducibility across multiple laboratories for the control log density values and log reductions. Although the data do not support the adoption of all modifications, the UDM collaborative study data are valuable for assessing sources of method variability and a reassessment of the performance standard for the UDM.

  19. SU-E-T-804: Verification of the BJR-25 Method of KQ Determination for CyberKnife Absolute Dosimetry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gersh, J; Spectrum Medical Physics, LLC - Greenville, SC; Willett, B

    2015-06-15

    Purpose: Absolute calibration of the CyberKnife is performed using a 6cm-diameter cone defined at 80cm SAD. Since kQ is defined using PDD values determined using 10×10 cm fields at 100cm SSD, the PDD must be corrected in order to correctly apply the quality conversion factor. The accepted method is based on equivalent field-size conversions of PDD values using BJR25. Using the new InCise MLC system, the CK is capable of generating a rectangular field equivalent to 10×10 cm square field. In this study, a comparison is made between kQ values determined using the traditional BJR25 method and the MLC methodmore » introduced herein. Methods: First, kQ(BJR) is determined: a PDD is acquired using a 6cm circular field at 100cm SSD, its field size converted to an equivalent square, and PDD converted to a 10×10cm field using the appropriate BJR25 table. Maintaining a consistent setup, the collimator is changed, and the MLC method is used. Finally, kQ is determined using PDDs acquired with a 9.71×10.31cm at 100cm SSD. This field is produced by setting the field to a size of 7.77×8.25cm (since it is defined at 80cm SAD). An exact 10×10cm field since field size is relegated to increments of its leaf width (0.25cm). This comparison is made using an Exradin A1SL, IBA CC08, IBA CC13, and an Exradin A19. For each detector and collimator type, the beam injector was adjusted to give 5 different beam qualities; representing a range of clinical systems. Results: Averaging across all beam qualities, kQ(MLC) differed from kQ(BJR) by less than 0.15%. The difference between the values increased with detector volume. Conclusion: For CK users with standard cone collimators, the BJR25 method has been verified. For CK users the MLC system, a technique is described to determine kQ. Primary author is the President/Owner of Spectrum Medical Physics, LLC, a company which maintains contracts with Siemens Healthcare and Standard Imaging, Inc.« less

  20. 21 CFR 610.9 - Equivalent methods and processes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Equivalent methods and processes. 610.9 Section 610.9 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS General Provisions § 610.9 Equivalent methods and processes...

  1. 21 CFR 610.9 - Equivalent methods and processes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Equivalent methods and processes. 610.9 Section 610.9 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS General Provisions § 610.9 Equivalent methods and processes...

  2. Rolling moments in a trailing vortex flow field

    NASA Technical Reports Server (NTRS)

    Mcmillan, O. J.; Schwind, R. G.; Nielsen, J. N.; Dillenius, M. F. E.

    1977-01-01

    Pressure distributions are presented which were measured on a wing in close proximity to a tip vortex of known structure generated by a larger, upstream semispan wing. Overall loads calculated by integration of these pressures are checked by independent measurements made with an identical model mounted on a force balance. Several conventional methods of wing analysis are used to predict the loads on the following wing. Strip theory is shown to give uniformly poor results for loading distribution, although predictions of overall lift and rolling moment are sometimes acceptable. Good results are obtained for overall coefficients and loading distribution by using linearized pressures in vortex-lattice theory in conjunction with a rectilinear vortex. The equivalent relation from reverse-flow theory that can be used to give economic predictions for overall loads is presented.

  3. Negotiating for more: the multiple equivalent simultaneous offer.

    PubMed

    Heller, Richard E

    2014-02-01

    Whether a doctor, professional baseball manager, or a politician, having successful negotiation skills is a critical part of being a leader. Building upon prior journal articles on negotiation strategy, the author presents the concept of the multiple equivalent simultaneous offer (MESO). The concept of a MESO is straightforward: as opposed to making a single offer, make multiple offers with several variables. Each offer alters the different variables, such that the end result of each offer is equivalent from the perspective of the party making the offer. Research has found several advantages to the use of MESOs. For example, using MESOs, an offer was more likely to be accepted, and the counterparty was more likely to be satisfied with the negotiated deal. Additional benefits have been documented as well, underscoring why a prepared radiology business leader should understand the theory and practice of MESO. Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  4. Coupled vibration of isotropic metal hollow cylinders with large geometrical dimensions

    NASA Astrophysics Data System (ADS)

    Lin, Shuyu

    2007-08-01

    In this paper, the coupled vibration of isotropic metal hollow cylinders with large geometrical dimensions is studied by using an approximate analytic method. According to this method, when the equivalent mechanical coupling coefficient that is defined as the stress ratio is introduced, the coupled vibration of a metal hollow cylinder is reduced to two equivalent one-dimensional vibrations, one is an equivalent longitudinal extensional vibration in the height direction of the cylinder, and the other is an equivalent plane radial vibration in the radius direction. These two equivalent vibrations are coupled to each other by the equivalent mechanical coupling coefficient. The resonance frequency equation of metal hollow cylinders in coupled vibration is derived and longitudinal and radial resonance frequencies are computed. For comparison, the resonance frequencies of the hollow cylinders are also computed by using numerical method. The analysis shows that the results from these two methods are in a good agreement with each other.

  5. [Cultural adaptation of the Brazilian version of the Godin-Shephard Leisure-Time Physical Activity Questionnaire].

    PubMed

    São-João, Thaís Moreira; Rodrigues, Roberta Cunha Matheus; Gallani, Maria Cecilia Bueno Jayme; Miura, Cinthya Tamie de Passos; Domingues, Gabriela de Barros Leite; Godin, Gaston

    2013-06-01

    To conduct the cultural adaptation of the Brazilian version of the Godin-Shephard Leisure-Time Physical Activity Questionnaire (GSLTPAQ) and to assess its content validity, practicability, acceptability and reliability. The stages of translation, synthesis, back translation, expert committee review and pre-test were carried out, followed by the evaluation of the practicability, acceptability and reliability (test-retest). The judges assessed its semantic, idiomatic, conceptual, cultural and metabolic equivalences. The adapted version was submitted to the pre-test (n = 20), and test-retest (n = 80), in healthy individuals and in those suffering from cardiovascular disease in Limeira, SP, Southeastern Brazil, between 2010 and 2011. The proportion of agreement of the committee of judges was assessed using the Content Validity Index. Reliability was assessed by the criterion of stability, with 15 days between applications. Practicability was evaluated by the time spent interviewing and acceptability was estimated as the percentage of unanswered items and the proportion of patients who responded to all items. The translated version of the questionnaire showed evidence of appropriate semantic-idiomatic, conceptual, cultural and metabolic equivalence, with substitutions of several physical activities more appropriate to the Brazilian population. The practicability analysis showed short time needed for the application of the instrument (mean 3.0 minutes). As for acceptability, all patients answered 100% of the items. The test-retest analysis suggested that stability was good (Intraclass Correlation Coefficient value of 0.84). The Brazilian version of the questionnaire showed satisfactory measures of the qualities in question. Its application to diverse populations in future studies is recommended in order to provide robust measures of these qualities.

  6. Simulation-Based Prediction of Equivalent Continuous Noises during Construction Processes

    PubMed Central

    Zhang, Hong; Pei, Yun

    2016-01-01

    Quantitative prediction of construction noise is crucial to evaluate construction plans to help make decisions to address noise levels. Considering limitations of existing methods for measuring or predicting the construction noise and particularly the equivalent continuous noise level over a period of time, this paper presents a discrete-event simulation method for predicting the construction noise in terms of equivalent continuous level. The noise-calculating models regarding synchronization, propagation and equivalent continuous level are presented. The simulation framework for modeling the noise-affected factors and calculating the equivalent continuous noise by incorporating the noise-calculating models into simulation strategy is proposed. An application study is presented to demonstrate and justify the proposed simulation method in predicting the equivalent continuous noise during construction. The study contributes to provision of a simulation methodology to quantitatively predict the equivalent continuous noise of construction by considering the relevant uncertainties, dynamics and interactions. PMID:27529266

  7. Simulation-Based Prediction of Equivalent Continuous Noises during Construction Processes.

    PubMed

    Zhang, Hong; Pei, Yun

    2016-08-12

    Quantitative prediction of construction noise is crucial to evaluate construction plans to help make decisions to address noise levels. Considering limitations of existing methods for measuring or predicting the construction noise and particularly the equivalent continuous noise level over a period of time, this paper presents a discrete-event simulation method for predicting the construction noise in terms of equivalent continuous level. The noise-calculating models regarding synchronization, propagation and equivalent continuous level are presented. The simulation framework for modeling the noise-affected factors and calculating the equivalent continuous noise by incorporating the noise-calculating models into simulation strategy is proposed. An application study is presented to demonstrate and justify the proposed simulation method in predicting the equivalent continuous noise during construction. The study contributes to provision of a simulation methodology to quantitatively predict the equivalent continuous noise of construction by considering the relevant uncertainties, dynamics and interactions.

  8. Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

    PubMed

    Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

    2016-04-01

    This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

  9. Calculation of Reaction Forces in the Boiler Supports Using the Method of Equivalent Stiffness of Membrane Wall

    PubMed Central

    Sertić, Josip; Kozak, Dražan; Samardžić, Ivan

    2014-01-01

    The values of reaction forces in the boiler supports are the basis for the dimensioning of bearing steel structure of steam boiler. In this paper, the application of the method of equivalent stiffness of membrane wall is proposed for the calculation of reaction forces. The method of equalizing displacement, as the method of homogenization of membrane wall stiffness, was applied. On the example of “Milano” boiler, using the finite element method, the calculation of reactions in the supports for the real geometry discretized by the shell finite element was made. The second calculation was performed with the assumption of ideal stiffness of membrane walls and the third using the method of equivalent stiffness of membrane wall. In the third case, the membrane walls are approximated by the equivalent orthotropic plate. The approximation of membrane wall stiffness is achieved using the elasticity matrix of equivalent orthotropic plate at the level of finite element. The obtained results were compared, and the advantages of using the method of equivalent stiffness of membrane wall for the calculation of reactions in the boiler supports were emphasized. PMID:24959612

  10. Acceptance lowers stress reactivity: Dismantling mindfulness training in a randomized controlled trial.

    PubMed

    Lindsay, Emily K; Young, Shinzen; Smyth, Joshua M; Brown, Kirk Warren; Creswell, J David

    2018-01-01

    Mindfulness interventions, which train practitioners to monitor their present-moment experience with a lens of acceptance, are known to buffer stress reactivity. Little is known about the active mechanisms driving these effects. We theorize that acceptance is a critical emotion regulation mechanism underlying mindfulness stress reduction effects. In this three-arm parallel trial, mindfulness components were dismantled into three structurally equivalent 15-lesson smartphone-based interventions: (1) training in both monitoring and acceptance (Monitor+Accept), (2) training in monitoring only (Monitor Only), or (3) active control training (Coping control). 153 stressed adults (mean age=32years; 67% female; 53% white, 21.5% black, 21.5% Asian, 4% other race) were randomly assigned to complete one of three interventions. After the intervention, cortisol, blood pressure, and subjective stress reactivity were assessed using a modified Trier Social Stress Test. As predicted, Monitor+Accept training reduced cortisol and systolic blood pressure reactivity compared to Monitor Only and control trainings. Participants in all three conditions reported moderate levels of subjective stress. This study provides the first experimental evidence that brief smartphone mindfulness training can impact stress biology, and that acceptance training drives these effects. We discuss implications for basic and applied research in contemplative science, emotion regulation, stress and coping, health, and clinical interventions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Recommendation for a non-animal alternative to rat caries testing.

    PubMed

    Featherstone, John D B; Stookey, George K; Kaminski, Michael A; Faller, Robert V

    2011-10-01

    As a requirement of the Food & Drug Administration's final monograph on "Anticaries drug products for over-the-counter human use", the toothpaste industry has been conducting animal caries tests on every fluoride-containing toothpaste introduced into the U.S. market since 1996. The practice of testing in animals, although required by law, is in stark conflict with the corporate policy of many U.S. and global toothpaste manufacturers, in which, if possible, alternatives to animal testing are utilized. A provision does exist within the regulation which allows the use of an alternative method to demonstrate efficacy. However, to take advantage of this provision, a petition must be submitted to the FDA and in this petition data demonstrating the alternative provides results of "equivalent accuracy" must be included. After many years of research, model development and model comparisons, we have identified one particular laboratory model that demonstrated excellent correlation with the currently accepted animal caries models. This model, known as the Featherstone pH cycling model, is discussed in this paper. The Featherstone pH cycling model has been shown to produce results of equivalent accuracy to the animal caries model by: (1) demonstrating a clinically relevant fluoride dose response similar to that shown in the animal caries model (including 1100 ppm F, 250 ppm F and placebo); (2) demonstrating similar results to the animal caries model for clinically proven dentifrice formulations relative to positive and negative controls; (3) demonstrating discriminating ability in strong agreement with the animal caries model for differentiating between a dentifrice formulation with attenuated fluoride activity and a USP standard; and (4) providing a clinically relevant representation of the caries process, as demonstrated by orthodontic banding studies. In addition, the model sufficiently addresses both salivary and abrasive/anticalculus agent interference concerns. For more than 50 years, fluoride has been the first defense in the fight against dental caries. The clinical effectiveness of fluoride is well accepted and documented extensively in the literature. The mechanism through which fluoride provides its benefit is very straightforward and well understood. The proposed laboratory model effectively simulates the effect of the caries process and has been shown to demonstrate equivalent accuracy to animal caries. This indicates that there are strong scientific grounds for the use of this model as an alternative to the animal caries test. Based on the strength of the data and the correlations noted between the two models, we recommend that the scientific community and the toothpaste industry broadly accept the Featherstone laboratory pH cycling model as an appropriate alternative to animal testing, particularly for ionic fluoride based dentifrices.

  12. Differential Response to a Dysphoric Mood Induction Procedure as a Function of Level of Experiential Avoidance

    ERIC Educational Resources Information Center

    Gird, Suzanne; Zettle, Robert D.

    2009-01-01

    Participants reporting high versus low levels of experiential avoidance as assessed by the Acceptance and Action Questionnaire (Hayes et al., 2004) were compared in their responsivity to a mood induction procedure and in their subjective reactions to resulting changes in dysphoric mood. Both groups showed equivalent changes in levels of dysphoric…

  13. 46 CFR 188.15-5 - Design of vessels.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Design of vessels. 188.15-5 Section 188.15-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Equivalents § 188.15-5 Design of vessels. (a) In order not to inhibit design and application the Commandant may accept vessels of unusual, uniqu...

  14. 46 CFR 188.15-5 - Design of vessels.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Design of vessels. 188.15-5 Section 188.15-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Equivalents § 188.15-5 Design of vessels. (a) In order not to inhibit design and application the Commandant may accept vessels of unusual, uniqu...

  15. 46 CFR 188.15-5 - Design of vessels.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Design of vessels. 188.15-5 Section 188.15-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Equivalents § 188.15-5 Design of vessels. (a) In order not to inhibit design and application the Commandant may accept vessels of unusual, uniqu...

  16. 25 CFR 542.14 - What are the minimum internal control standards for the cage?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... deposit (cash, check, chips); however, (vi) Provided all of the information in paragraph (c)(2)(i) through... equivalents, chips, and tokens shall be accepted from customers for the purpose of a customer deposit. (7) The... Commission upon request. (e) Chip and token standards. The Tribal gaming regulatory authority, or the gaming...

  17. 25 CFR 542.14 - What are the minimum internal control standards for the cage?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... deposit (cash, check, chips); however, (vi) Provided all of the information in paragraph (c)(2)(i) through... equivalents, chips, and tokens shall be accepted from customers for the purpose of a customer deposit. (7) The... Commission upon request. (e) Chip and token standards. The Tribal gaming regulatory authority, or the gaming...

  18. Can electronic medical images replace hard-copy film? Defining and testing the equivalence of diagnostic tests.

    PubMed

    Obuchowski, N A

    2001-10-15

    Electronic medical images are an efficient and convenient format in which to display, store and transmit radiographic information. Before electronic images can be used routinely to screen and diagnose patients, however, it must be shown that readers have the same diagnostic performance with this new format as traditional hard-copy film. Currently, there exist no suitable definitions of diagnostic equivalence. In this paper we propose two criteria for diagnostic equivalence. The first criterion ('population equivalence') considers the variability between and within readers, as well as the mean reader performance. This criterion is useful for most applications. The second criterion ('individual equivalence') involves a comparison of the test results for individual patients and is necessary when patients are followed radiographically over time. We present methods for testing both individual and population equivalence. The properties of the proposed methods are assessed in a Monte Carlo simulation study. Data from a mammography screening study is used to illustrate the proposed methods and compare them with results from more conventional methods of assessing equivalence and inter-procedure agreement. Copyright 2001 John Wiley & Sons, Ltd.

  19. Review of Recent Development of Dynamic Wind Farm Equivalent Models Based on Big Data Mining

    NASA Astrophysics Data System (ADS)

    Wang, Chenggen; Zhou, Qian; Han, Mingzhe; Lv, Zhan’ao; Hou, Xiao; Zhao, Haoran; Bu, Jing

    2018-04-01

    Recently, the big data mining method has been applied in dynamic wind farm equivalent modeling. In this paper, its recent development with present research both domestic and overseas is reviewed. Firstly, the studies of wind speed prediction, equivalence and its distribution in the wind farm are concluded. Secondly, two typical approaches used in the big data mining method is introduced, respectively. For single wind turbine equivalent modeling, it focuses on how to choose and identify equivalent parameters. For multiple wind turbine equivalent modeling, the following three aspects are concentrated, i.e. aggregation of different wind turbine clusters, the parameters in the same cluster, and equivalence of collector system. Thirdly, an outlook on the development of dynamic wind farm equivalent models in the future is discussed.

  20. Individual differences in loss aversion and preferences for skewed risks across adulthood.

    PubMed

    Seaman, Kendra L; Green, Mikella A; Shu, Stephen; Samanez-Larkin, Gregory R

    2018-06-01

    In a previous study, we found adult age differences in the tendency to accept more positively skewed gambles (with a small chance of a large win) than other equivalent risks, or an age-related positive-skew bias. In the present study, we examined whether loss aversion explained this bias. A total of 508 healthy participants (ages 21-82) completed measures of loss aversion and skew preference. Age was not related to loss aversion. Although loss aversion was a significant predictor of gamble acceptance, it did not influence the age-related positive-skew bias. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  1. Hands-free administration of subjective workload scales: acceptability in a surgical training environment.

    PubMed

    Carswell, C Melody; Lio, Cindy H; Grant, Russell; Klein, Martina I; Clarke, Duncan; Seales, W Brent; Strup, Stephen

    2010-12-01

    Subjective workload measures are usually administered in a visual-manual format, either electronically or by paper and pencil. However, vocal responses to spoken queries may sometimes be preferable, for example when experimental manipulations require continuous manual responding or when participants have certain sensory/motor impairments. In the present study, we evaluated the acceptability of the hands-free administration of two subjective workload questionnaires - the NASA Task Load Index (NASA-TLX) and the Multiple Resources Questionnaire (MRQ) - in a surgical training environment where manual responding is often constrained. Sixty-four undergraduates performed fifteen 90-s trials of laparoscopic training tasks (five replications of 3 tasks - cannulation, ring transfer, and rope manipulation). Half of the participants provided workload ratings using a traditional paper-and-pencil version of the NASA-TLX and MRQ; the remainder used a vocal (hands-free) version of the questionnaires. A follow-up experiment extended the evaluation of the hands-free version to actual medical students in a Minimally Invasive Surgery (MIS) training facility. The NASA-TLX was scored in 2 ways - (1) the traditional procedure using participant-specific weights to combine its 6 subscales, and (2) a simplified procedure - the NASA Raw Task Load Index (NASA-RTLX) - using the unweighted mean of the subscale scores. Comparison of the scores obtained from the hands-free and written administration conditions yielded coefficients of equivalence of r=0.85 (NASA-TLX) and r=0.81 (NASA-RTLX). Equivalence estimates for the individual subscales ranged from r=0.78 ("mental demand") to r=0.31 ("effort"). Both administration formats and scoring methods were equally sensitive to task and repetition effects. For the MRQ, the coefficient of equivalence for the hands-free and written versions was r=0.96 when tested on undergraduates. However, the sensitivity of the hands-free MRQ to task demands (η(partial)(2)=0.138) was substantially less than that for the written version (η(partial)(2)=0.252). This potential shortcoming of the hands-free MRQ did not seem to generalize to medical students who showed robust task effects when using the hands-free MRQ (η(partial)(2)=0.396). A detailed analysis of the MRQ subscales also revealed differences that may be attributable to a "spillover" effect in which participants' judgments about the demands of completing the questionnaires contaminated their judgments about the primary surgical training tasks. Vocal versions of the NASA-TLX are acceptable alternatives to standard written formats when researchers wish to obtain global workload estimates. However, care should be used when interpreting the individual subscales if the object is to make comparisons between studies or conditions that use different administration modalities. For the MRQ, the vocal version was less sensitive to experimental manipulations than its written counterpart; however, when medical students rather than undergraduates used the vocal version, the instrument's sensitivity increased well beyond that obtained with any other combination of administration modality and instrument in this study. Thus, the vocal version of the MRQ may be an acceptable workload assessment technique for selected populations, and it may even be a suitable substitute for the NASA-TLX. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. Can Land Managers Control Japanese Knotweed? Lessons from Control Tests in Belgium

    NASA Astrophysics Data System (ADS)

    Delbart, Emmanuel; Mahy, Grégory; Weickmans, Bernard; Henriet, François; Crémer, Sébastien; Pieret, Nora; Vanderhoeven, Sonia; Monty, Arnaud

    2012-12-01

    Japanese knotweed Fallopia japonica is an extremely abundant invasive plant in Belgium and surrounding countries. To date, no eradication method is available for land managers facing the invasion of this rhizomatous plant. We tested different chemical herbicides with two application methods (spraying and stem injection), as well as mechanical treatments, on knotweed clones throughout southern Belgium. The tested control methods were selected to be potentially usable by managers, e.g., using legally accepted rates for herbicides. Stem volume, height and density reduction were assessed after one or two years, depending on the control method. Labor estimations were made for each control method. No tested control method completely eradicated the clones. Stem injection with glyphosate-based herbicide (3.6 kg ha-1 of acid equivalent glyphosate) caused the most damage, i.e., no sprouting shoots were observed the year following the injection. The following year, though, stunted shoots appeared. Among the mechanical control methods, repeated cuts combined with native tree transplanting most appreciably reduced knotweed development. The most efficient methods we tested could curb knotweed invasion, but are not likely to be effective in eradicating the species. As such, they should be included in a more integrated restoration strategy, together with prevention and public awareness campaigns.

  3. Equivalence testing using existing reference data: An example with genetically modified and conventional crops in animal feeding studies.

    PubMed

    van der Voet, Hilko; Goedhart, Paul W; Schmidt, Kerstin

    2017-11-01

    An equivalence testing method is described to assess the safety of regulated products using relevant data obtained in historical studies with assumedly safe reference products. The method is illustrated using data from a series of animal feeding studies with genetically modified and reference maize varieties. Several criteria for quantifying equivalence are discussed, and study-corrected distribution-wise equivalence is selected as being appropriate for the example case study. An equivalence test is proposed based on a high probability of declaring equivalence in a simplified situation, where there is no between-group variation, where the historical and current studies have the same residual variance, and where the current study is assumed to have a sample size as set by a regulator. The method makes use of generalized fiducial inference methods to integrate uncertainties from both the historical and the current data. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  4. Comparison of the techniques for the identification of the epidural space using the loss-of-resistance technique or an automated syringe - results of a randomized double-blind study.

    PubMed

    Duniec, Larysa; Nowakowski, Piotr; Sieczko, Jakub; Chlebus, Marcin; Łazowski, Tomasz

    2016-01-01

    The conventional, loss of resistance technique for identification of the epidural space is highly dependent on the anaesthetist's personal experience and is susceptible to technical errors. Therefore, an alternative, automated technique was devised to overcome the drawbacks of the traditional method. The aim of the study was to compare the efficacy of epidural space identification and the complication rate between the two groups - the automatic syringe and conventional loss of resistance methods. 47 patients scheduled for orthopaedic and gynaecology procedures under epidural anaesthesia were enrolled into the study. The number of attempts, ease of epidural space identification, complication rate and the patients' acceptance regarding the two techniques were evaluated. The majority of blocks were performed by trainee anaesthetists (91.5%). No statistical difference was found between the number of needle insertion attempts (1 vs. 2), the efficacy of epidural anaesthesia or the number of complications between the groups. The ease of epidural space identification, as assessed by an anaesthetist, was significantly better (P = 0.011) in the automated group (87.5% vs. 52.4%). A similar number of patients (92% vs. 94%) in both groups stated they would accept epidural anaesthesia in the future. The automated and loss of resistance methods of epidural space identification were proved to be equivalent in terms of efficacy and safety. Since the use of the automated technique may facilitate epidural space identification, it may be regarded as useful technique for anaesthetists inexperienced in epidural anaesthesia, or for trainees.

  5. An analytical method to calculate equivalent fields to irregular symmetric and asymmetric photon fields.

    PubMed

    Tahmasebi Birgani, Mohamad J; Chegeni, Nahid; Zabihzadeh, Mansoor; Hamzian, Nima

    2014-01-01

    Equivalent field is frequently used for central axis depth-dose calculations of rectangular- and irregular-shaped photon beams. As most of the proposed models to calculate the equivalent square field are dosimetry based, a simple physical-based method to calculate the equivalent square field size was used as the basis of this study. The table of the sides of the equivalent square or rectangular fields was constructed and then compared with the well-known tables by BJR and Venselaar, et al. with the average relative error percentage of 2.5 ± 2.5% and 1.5 ± 1.5%, respectively. To evaluate the accuracy of this method, the percentage depth doses (PDDs) were measured for some special irregular symmetric and asymmetric treatment fields and their equivalent squares for Siemens Primus Plus linear accelerator for both energies, 6 and 18MV. The mean relative differences of PDDs measurement for these fields and their equivalent square was approximately 1% or less. As a result, this method can be employed to calculate equivalent field not only for rectangular fields but also for any irregular symmetric or asymmetric field. © 2013 American Association of Medical Dosimetrists Published by American Association of Medical Dosimetrists All rights reserved.

  6. Diabetes self-management education: acceptability of using trained lay educators.

    PubMed

    Mandalia, P K; Stone, M A; Davies, M J; Khunti, K; Carey, M E

    2014-11-01

    The use of lay people to deliver education programmes for people with chronic conditions is a potential method of addressing healthcare staff capacity and increasing the cost efficiency of delivering education. This qualitative substudy is embedded within an equivalence trial (2008-2011 including development stage). In the qualitative substudy, we aimed to elicit the views of key stakeholders (patients, educators) about using lay people to deliver education to people recently diagnosed with type 2 diabetes, alongside a healthcare professional educator with an equal role. In this way, we sought to explore perceptions about acceptability and also contribute to understanding the reasons underlying positive or negative quantitative findings from main trial. We conducted 27 telephone interviews with a purposive sample of patients, lay educators and healthcare professional educators involved in the main trial. Thematic analysis of transcribed data was underpinned by the constant comparative approach and structured using Framework methodology. Overall, the data suggested that the use of lay educators was acceptable to educators and patients. Perceived difference in knowledge levels between lay and healthcare professional educators did not appear to have an impact on perceived acceptability or the effectiveness of the education received. Additional themes explored were related to peer status of educators and feasibility. Some concerns were raised about lay educators with diabetes, transferring personal issues and about the impact of healthcare professional time taken up by mentoring and supporting lay educators. Positive perceptions about the use of lay educators support the positive quantitative findings from the main trial. Acceptability is an important consideration in relation to implementation of the model of delivery studied. Concerns raised within the interviews should be considered in the design of training for lay educators. ISRCTN 99350009. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  7. A continuous-discrete approach for evaluation of natural frequencies and mode shapes of high-rise buildings

    NASA Astrophysics Data System (ADS)

    Malekinejad, Mohsen; Rahgozar, Reza; Malekinejad, Ali; Rahgozar, Peyman

    2016-09-01

    In this paper, a continuous-discrete approach based on the concept of lumped mass and equivalent continuous approach is proposed for free vibration analysis of combined system of framed tube, shear core and outrigger-belt truss in high-rise buildings. This system is treated as a continuous system (i.e., discrete beams and columns are replaced with equivalent continuous membranes) and a discrete system (or lumped mass system) at different stages of dynamic analysis. The structure is discretized at each floor of the building as a series of lumped masses placed at the center of shear core. Each mass has two transitional degrees of freedom (lateral and axial( and one rotational. The effect of shear core and outrigger-belt truss on framed tube system is modeled as a rotational spring placed at the location of outrigger-belt truss system along structure's height. By solving the resulting eigen problem, natural frequencies and mode-shapes are obtained. Numerical examples are presented to show acceptable accuracy of the procedure in estimating the fundamental frequencies and corresponding mode shapes of the combined system as compared to finite element analysis of the complete structure. The simplified proposed method is much faster and should be more suitable for rapid interactive design.

  8. Assessment and Treatment of Cognition and Communication Skills in Adults With Acquired Brain Injury via Telepractice: A Systematic Review.

    PubMed

    Coleman, Jaumeiko J; Frymark, Tobi; Franceschini, Nicole M; Theodoros, Deborah G

    2015-05-01

    This is a systematic review of assessment and treatment of cognitive and communicative abilities of individuals with acquired brain injury via telepractice versus in person. The a priori clinical questions were informed by previous research that highlights the importance of considering any functional implications of outcomes, determining disorder- and setting-specific concerns, and measuring the potential impact of diagnostic accuracy and treatment efficacy data on interpretation of findings. A literature search of multiple databases (e.g., PubMed) was conducted using key words and study inclusion criteria associated with the clinical questions. Ten group studies were accepted that addressed assessment of motor speech, language, and cognitive impairments; assessment of motor speech and language activity limitations/participation restrictions; and treatment of cognitive impairments and activity limitations/participation restrictions. In most cases, equivalence of outcomes was noted across service delivery methods. Limited findings, lack of diagnostic accuracy and treatment efficacy data, and heterogeneity of assessments and interventions precluded robust evaluation of clinical implications for telepractice equivalence and the broader area of telepractice efficacy. Future research is needed that will build upon current knowledge through replication. In addition, further evaluation at the impairment and activity limitation/participation restriction levels is needed.

  9. Primary invasive squamous carcinoma of the vagina

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pride, G.L.; Schultz, A.E.; Chuprevich, T.W.

    1979-02-01

    Forty-three cases of primary vaginal squamous cell cancer were treated at the University of Wisconsin Hospital between 1956 and 1971. These cases comprised of 1.2% of patients admitted to the University Hospital with female genital tract cancer. Evidence is presented to support a modification of the currently accepted FIGO staging system for vaginal carcinoma (Stage II disease). Radiation therapy using both external beam and brachyradium equivalents or interstitial implantation of suitable isotopes was an effective method for the treatment of patients having early and locally advanced invasive vaginal cancer. The 5-year absolute survival rate for the entire series was 37.2%.more » Absolute survival rate by modified FIGO clinical staging was 66% for Stages I and IIA, 31% for Stage IIB, 25% for Stage III, and 0% for Stage IV.« less

  10. 40 CFR Table A-1 to Subpart A of... - Summary of Applicable Requirements for Reference and Equivalent Methods for Air Monitoring of...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Methods for Air Monitoring of Criteria Pollutants Pollutant Ref. or equivalent Manual or automated Applicable part 50 appendix Applicable subparts of part 53 A B C D E F SO2 Reference Manual A Equivalent Manual ✓ ✓ Automated ✓ ✓ ✓ CO Reference Automated C ✓ ✓ Equivalent Manual ✓ ✓ Automated ✓ ✓ ✓ O3...

  11. An international measure of awareness and beliefs about cancer: development and testing of the ABC

    PubMed Central

    Simon, Alice E; Forbes, Lindsay J L; Boniface, David; Warburton, Fiona; Brain, Kate E; Dessaix, Anita; Donnelly, Michael; Haynes, Kerry; Hvidberg, Line; Lagerlund, Magdalena; Petermann, Lisa; Tishelman, Carol; Vedsted, Peter; Vigmostad, Maria Nyre; Wardle, Jane; Ramirez, Amanda J

    2012-01-01

    Objectives To develop an internationally validated measure of cancer awareness and beliefs; the awareness and beliefs about cancer (ABC) measure. Design and setting Items modified from existing measures were assessed by a working group in six countries (Australia, Canada, Denmark, Norway, Sweden and the UK). Validation studies were completed in the UK, and cross-sectional surveys of the general population were carried out in the six participating countries. Participants Testing in UK English included cognitive interviewing for face validity (N=10), calculation of content validity indexes (six assessors), and assessment of test–retest reliability (N=97). Conceptual and cultural equivalence of modified (Canadian and Australian) and translated (Danish, Norwegian, Swedish and Canadian French) ABC versions were tested quantitatively for equivalence of meaning (≥4 assessors per country) and in bilingual cognitive interviews (three interviews per translation). Response patterns were assessed in surveys of adults aged 50+ years (N≥2000) in each country. Main outcomes Psychometric properties were evaluated through tests of validity and reliability, conceptual and cultural equivalence and systematic item analysis. Test–retest reliability used weighted-κ and intraclass correlations. Construction and validation of aggregate scores was by factor analysis for (1) beliefs about cancer outcomes, (2) beliefs about barriers to symptomatic presentation, and item summation for (3) awareness of cancer symptoms and (4) awareness of cancer risk factors. Results The English ABC had acceptable test–retest reliability and content validity. International assessments of equivalence identified a small number of items where wording needed adjustment. Survey response patterns showed that items performed well in terms of difficulty and discrimination across countries except for awareness of cancer outcomes in Australia. Aggregate scores had consistent factor structures across countries. Conclusions The ABC is a reliable and valid international measure of cancer awareness and beliefs. The methods used to validate and harmonise the ABC may serve as a methodological guide in international survey research. PMID:23253874

  12. NAIRAS aircraft radiation model development, dose climatology, and initial validation.

    PubMed

    Mertens, Christopher J; Meier, Matthias M; Brown, Steven; Norman, Ryan B; Xu, Xiaojing

    2013-10-01

    [1] The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) is a real-time, global, physics-based model used to assess radiation exposure to commercial aircrews and passengers. The model is a free-running physics-based model in the sense that there are no adjustment factors applied to nudge the model into agreement with measurements. The model predicts dosimetric quantities in the atmosphere from both galactic cosmic rays (GCR) and solar energetic particles, including the response of the geomagnetic field to interplanetary dynamical processes and its subsequent influence on atmospheric dose. The focus of this paper is on atmospheric GCR exposure during geomagnetically quiet conditions, with three main objectives. First, provide detailed descriptions of the NAIRAS GCR transport and dosimetry methodologies. Second, present a climatology of effective dose and ambient dose equivalent rates at typical commercial airline altitudes representative of solar cycle maximum and solar cycle minimum conditions and spanning the full range of geomagnetic cutoff rigidities. Third, conduct an initial validation of the NAIRAS model by comparing predictions of ambient dose equivalent rates with tabulated reference measurement data and recent aircraft radiation measurements taken in 2008 during the minimum between solar cycle 23 and solar cycle 24. By applying the criterion of the International Commission on Radiation Units and Measurements (ICRU) on acceptable levels of aircraft radiation dose uncertainty for ambient dose equivalent greater than or equal to an annual dose of 1 mSv, the NAIRAS model is within 25% of the measured data, which fall within the ICRU acceptable uncertainty limit of 30%. The NAIRAS model predictions of ambient dose equivalent rate are generally within 50% of the measured data for any single-point comparison. The largest differences occur at low latitudes and high cutoffs, where the radiation dose level is low. Nevertheless, analysis suggests that these single-point differences will be within 30% when a new deterministic pion-initiated electromagnetic cascade code is integrated into NAIRAS, an effort which is currently underway.

  13. NAIRAS aircraft radiation model development, dose climatology, and initial validation

    NASA Astrophysics Data System (ADS)

    Mertens, Christopher J.; Meier, Matthias M.; Brown, Steven; Norman, Ryan B.; Xu, Xiaojing

    2013-10-01

    The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) is a real-time, global, physics-based model used to assess radiation exposure to commercial aircrews and passengers. The model is a free-running physics-based model in the sense that there are no adjustment factors applied to nudge the model into agreement with measurements. The model predicts dosimetric quantities in the atmosphere from both galactic cosmic rays (GCR) and solar energetic particles, including the response of the geomagnetic field to interplanetary dynamical processes and its subsequent influence on atmospheric dose. The focus of this paper is on atmospheric GCR exposure during geomagnetically quiet conditions, with three main objectives. First, provide detailed descriptions of the NAIRAS GCR transport and dosimetry methodologies. Second, present a climatology of effective dose and ambient dose equivalent rates at typical commercial airline altitudes representative of solar cycle maximum and solar cycle minimum conditions and spanning the full range of geomagnetic cutoff rigidities. Third, conduct an initial validation of the NAIRAS model by comparing predictions of ambient dose equivalent rates with tabulated reference measurement data and recent aircraft radiation measurements taken in 2008 during the minimum between solar cycle 23 and solar cycle 24. By applying the criterion of the International Commission on Radiation Units and Measurements (ICRU) on acceptable levels of aircraft radiation dose uncertainty for ambient dose equivalent greater than or equal to an annual dose of 1 mSv, the NAIRAS model is within 25% of the measured data, which fall within the ICRU acceptable uncertainty limit of 30%. The NAIRAS model predictions of ambient dose equivalent rate are generally within 50% of the measured data for any single-point comparison. The largest differences occur at low latitudes and high cutoffs, where the radiation dose level is low. Nevertheless, analysis suggests that these single-point differences will be within 30% when a new deterministic pion-initiated electromagnetic cascade code is integrated into NAIRAS, an effort which is currently underway.

  14. NAIRAS aircraft radiation model development, dose climatology, and initial validation

    PubMed Central

    Mertens, Christopher J; Meier, Matthias M; Brown, Steven; Norman, Ryan B; Xu, Xiaojing

    2013-01-01

    [1] The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) is a real-time, global, physics-based model used to assess radiation exposure to commercial aircrews and passengers. The model is a free-running physics-based model in the sense that there are no adjustment factors applied to nudge the model into agreement with measurements. The model predicts dosimetric quantities in the atmosphere from both galactic cosmic rays (GCR) and solar energetic particles, including the response of the geomagnetic field to interplanetary dynamical processes and its subsequent influence on atmospheric dose. The focus of this paper is on atmospheric GCR exposure during geomagnetically quiet conditions, with three main objectives. First, provide detailed descriptions of the NAIRAS GCR transport and dosimetry methodologies. Second, present a climatology of effective dose and ambient dose equivalent rates at typical commercial airline altitudes representative of solar cycle maximum and solar cycle minimum conditions and spanning the full range of geomagnetic cutoff rigidities. Third, conduct an initial validation of the NAIRAS model by comparing predictions of ambient dose equivalent rates with tabulated reference measurement data and recent aircraft radiation measurements taken in 2008 during the minimum between solar cycle 23 and solar cycle 24. By applying the criterion of the International Commission on Radiation Units and Measurements (ICRU) on acceptable levels of aircraft radiation dose uncertainty for ambient dose equivalent greater than or equal to an annual dose of 1 mSv, the NAIRAS model is within 25% of the measured data, which fall within the ICRU acceptable uncertainty limit of 30%. The NAIRAS model predictions of ambient dose equivalent rate are generally within 50% of the measured data for any single-point comparison. The largest differences occur at low latitudes and high cutoffs, where the radiation dose level is low. Nevertheless, analysis suggests that these single-point differences will be within 30% when a new deterministic pion-initiated electromagnetic cascade code is integrated into NAIRAS, an effort which is currently underway. PMID:26213513

  15. Equivalent linearization for fatigue life estimates of a nonlinear structure

    NASA Technical Reports Server (NTRS)

    Miles, R. N.

    1989-01-01

    An analysis is presented of the suitability of the method of equivalent linearization for estimating the fatigue life of a nonlinear structure. Comparisons are made of the fatigue life of a nonlinear plate as predicted using conventional equivalent linearization and three other more accurate methods. The excitation of the plate is assumed to be Gaussian white noise and the plate response is modeled using a single resonant mode. The methods used for comparison consist of numerical simulation, a probabalistic formulation, and a modification of equivalent linearization which avoids the usual assumption that the response process is Gaussian. Remarkably close agreement is obtained between all four methods, even for cases where the response is significantly linear.

  16. Equivalent radiation source of 3D package for electromagnetic characteristics analysis

    NASA Astrophysics Data System (ADS)

    Li, Jun; Wei, Xingchang; Shu, Yufei

    2017-10-01

    An equivalent radiation source method is proposed to characterize electromagnetic emission and interference of complex three dimensional integrated circuits (IC) in this paper. The method utilizes amplitude-only near-field scanning data to reconstruct an equivalent magnetic dipole array, and the differential evolution optimization algorithm is proposed to extract the locations, orientation and moments of those dipoles. By importing the equivalent dipoles model into a 3D full-wave simulator together with the victim circuit model, the electromagnetic interference issues in mixed RF/digital systems can be well predicted. A commercial IC is used to validate the accuracy and efficiency of this proposed method. The coupled power at the victim antenna port calculated by the equivalent radiation source is compared with the measured data. Good consistency is obtained which confirms the validity and efficiency of the method. Project supported by the National Nature Science Foundation of China (No. 61274110).

  17. How does tele-learning compare with other forms of education delivery? A systematic review of tele-learning educational outcomes for health professionals.

    PubMed

    Tomlinson, Jo; Shaw, Tim; Munro, Ana; Johnson, Ros; Madden, D Lynne; Phillips, Rosemary; McGregor, Deborah

    2013-11-01

    Telecommuniciation technologies, including audio and videoconferencing facilities, afford geographically dispersed health professionals the opportunity to connect and collaborate with others. Recognised for enabling tele-consultations and tele-collaborations between teams of health care professionals and their patients, these technologies are also well suited to the delivery of distance learning programs, known as tele-learning. To determine whether tele-learning delivery methods achieve equivalent learning outcomes when compared with traditional face-to-face education delivery methods. A systematic literature review was commissioned by the NSW Ministry of Health to identify results relevant to programs applying tele-learning delivery methods in the provision of education to health professionals. The review found few studies that rigorously compared tele-learning with traditional formats. There was some evidence, however, to support the premise that tele-learning models achieve comparable learning outcomes and that participants are generally satisfied with and accepting of this delivery method. The review illustrated that tele-learning technologies not only enable distance learning opportunities, but achieve comparable learning outcomes to traditional face-to-face models. More rigorous evidence is required to strengthen these findings and should be the focus of future tele-learning research.

  18. Assessing cosmetic results after breast conserving surgery.

    PubMed

    Cardoso, Maria João; Oliveira, Helder; Cardoso, Jaime

    2014-07-01

    "Taking less treating better" has been one of the major improvements of breast cancer surgery in the last four decades. The application of this principle translates into equivalent survival of breast cancer conserving treatment (BCT) when compared to mastectomy, with a better cosmetic outcome. While it is relatively easy to evaluate the oncological results of BCT, the cosmetic outcome is more difficult to measure due to the lack of an effective and consensual procedure. The assessment of cosmetic outcome has been mainly subjective, undertaken by a panel of expert observers or/and by patient self-assessment. Unfortunately, the reproducibility of these methods is low. Objective methods have higher values of reproducibility but still lack the inclusion of several features considered by specialists in BCT to be fundamental for cosmetic outcome. The recent addition of volume information obtained with 3D images seems promising. Until now, unfortunately, no method is considered to be the standard of care. This paper revises the history of cosmetic evaluation and guides us into the future aiming at a method that can easily be used and accepted by all, caregivers and caretakers, allowing not only the comparison of results but the improvement of performance. © 2014 Wiley Periodicals, Inc.

  19. Quantitative Imaging Biomarkers: A Review of Statistical Methods for Technical Performance Assessment

    PubMed Central

    2017-01-01

    Technological developments and greater rigor in the quantitative measurement of biological features in medical images have given rise to an increased interest in using quantitative imaging biomarkers (QIBs) to measure changes in these features. Critical to the performance of a QIB in preclinical or clinical settings are three primary metrology areas of interest: measurement linearity and bias, repeatability, and the ability to consistently reproduce equivalent results when conditions change, as would be expected in any clinical trial. Unfortunately, performance studies to date differ greatly in designs, analysis method and metrics used to assess a QIB for clinical use. It is therefore, difficult or not possible to integrate results from different studies or to use reported results to design studies. The Radiological Society of North America (RSNA) and the Quantitative Imaging Biomarker Alliance (QIBA) with technical, radiological and statistical experts developed a set of technical performance analysis methods, metrics and study designs that provide terminology, metrics and methods consistent with widely accepted metrological standards. This document provides a consistent framework for the conduct and evaluation of QIB performance studies so that results from multiple studies can be compared, contrasted or combined. PMID:24919831

  20. Detecting overpressure using the Eaton and Equivalent Depth methods in Offshore Nova Scotia, Canada

    NASA Astrophysics Data System (ADS)

    Ernanda; Primasty, A. Q. T.; Akbar, K. A.

    2018-03-01

    Overpressure is an abnormal high subsurface pressure of any fluids which exceeds the hydrostatic pressure of column of water or formation brine. In Offshore Nova Scotia Canada, the values and depth of overpressure zone are determined using the eaton and equivalent depth method, based on well data and the normal compaction trend analysis. Since equivalent depth method is using effective vertical stress principle and Eaton method considers physical property ratio (velocity). In this research, pressure evaluation only applicable on Penobscot L-30 well. An abnormal pressure is detected at depth 11804 feet as possibly overpressure zone, based on pressure gradient curve and calculation between the Eaton method (7241.3 psi) and Equivalent Depth method (6619.4 psi). Shales within Abenaki formation especially Baccaro Member is estimated as possible overpressure zone due to hydrocarbon generation mechanism.

  1. Validation of a Spanish version of the psychological inflexibility in pain scale (PIPS) and an evaluation of its relation with acceptance of pain and mindfulness in sample of persons with fibromyalgia

    PubMed Central

    2013-01-01

    Background Psychological flexibility has been suggested as a fundamental process in health. The Psychological Inflexibility in Pain Scale (PIPS) is one of the scales employed for assessing psychological inflexibility in pain patients. The aim of this study was to validate the Spanish version of the PIPS and secondly, to compare it to two other psychological constructs, the acceptance of pain and mindfulness scales. Methods The PIPS was translated into Spanish by two bilingual linguistic experts, and then, back-translated into English to assess for equivalence. The final Spanish version was administered along with the Pain Visual Analogue Scale, Fibromyalgia Impact Questionnaire, Hospital Anxiety Depression Scale, Pain Catastrophizing Scale, Chronic Pain Acceptance Questionnaire and the Mindful Attention Awareness Scale, to 250 Spanish patients with fibromyalgia. Face validity, construct validity, reliability (internal consistency and test-retest) and convergent validity were tested. Also a multiple regression analysis was carried out.The usual guidelines have been followed for cross-cultural adaptations. Results Data were very similar to the ones obtained in the original PIPS version. The construct validity confirmed the original two-components solution which explained 61.6% of the variance. The Spanish PIPS had good test-retest reliability (intraclass correlation coefficient 0.97) and internal consistency reliability (Cronbach’s alpha: 0.90). The Spanish PIPS’ score correlated significantly with worse global functioning (r = 0.55), anxiety (r = 0.54), depression (r = 0.66), pain catastrophizing (r = 0.62), pain acceptance (r = −0.72) and mindfulness (r = −0.47), as well as correlating modestly with pain intensity (r = 0.12). The multiple regression analyses showed that psychological inflexibility, acceptance and mindfulness are not overlapped. Conclusions The Spanish PIPS scale appears to be a valid and reliable instrument for the evaluation of psychological inflexibility among a sample of fibromyalgia patients. These results ensure the use of this scale in research as well as in clinical practice. Psychological inflexibility measures processes different from other related components such as acceptance and mindfulness. PMID:23594367

  2. Influence of UAS Pilot Communication and Execution Delay on Controller's Acceptability Ratings of UAS-ATC Interactions

    NASA Technical Reports Server (NTRS)

    Vu, Kim-Phuong L.; Morales, Gregory; Chiappe, Dan; Strybel, Thomas Z.; Battiste, Vernol; Shively, Jay; Buker, Timothy J

    2013-01-01

    Successful integration of UAS in the NAS will require that UAS interactions with the air traffic management system be similar to interactions between manned aircraft and air traffic management. For example, UAS response times to air traffic controller (ATCo) clearances should be equivalent to those that are currently found to be acceptable with manned aircraft. Prior studies have examined communication delays with manned aircraft. Unfortunately, there is no analogous body of research for UAS. The goal of the present study was to determine how UAS pilot communication and execution delays affect ATCos' acceptability ratings of UAS pilot responses when the UAS is operating in the NAS. Eight radar-certified controllers managed traffic in a modified ZLA sector with one UAS flying in it. In separate scenarios, the UAS pilot verbal communication and execution delays were either short (1.5 s) or long (5 s) and either constant or variable. The ATCo acceptability of UAS pilot communication and execution delays were measured subjectively via post trial ratings. UAS verbal pilot communication delay, were rated as acceptable 92% of the time when the delay was short. This acceptability level decreased to 64% when the delay was long. UAS pilot execution delay had less of an influence on ATCo acceptability ratings in the present stimulation. Implications of these findings for UAS in the NAS integration are discussed.

  3. Pharmaceutical and pharmacokinetic characterization of a novel sublingual buprenorphine/naloxone tablet formulation in healthy volunteers.

    PubMed

    Fischer, Andreas; Jönsson, Martin; Hjelmström, Peter

    2015-01-01

    Bitter taste, as well as dissolve time, presents a significant challenge for the acceptability of formulations for oral transmucosal drug delivery. To characterize a novel sublingual tablet formulation of buprenorphine/naloxone with regards to pharmacokinetics, dissolve time and formulation acceptability. Dry mixing techniques were employed to produce a small and fast dissolving buprenorphine/naloxone sublingual tablet formulation, OX219 (Zubsolv®), using sucralose and menthol as sweetener and flavor to mask the bitter taste of the active ingredients. Two cross-over studies were performed in healthy volunteers to evaluate pharmacokinetics, dissolve time and acceptability of OX219 5.7/1.4 mg tablets compared to the commercially available buprenorphine/naloxone formulations Suboxone® tablets and films (8/2 mg). Buprenorphine exposure was equivalent in OX219 and Suboxone tablets. Sublingual dissolve times were significantly shorter for OX219 than for Suboxone tablets and were similar to Suboxone films. The OX219 formulation received significantly higher subjective ratings for taste and overall acceptability than both Suboxone formulations. OX219 was preferred over Suboxone tablet and film formulations by 77.4% and 88.9% of subjects, respectively. A sublingual tablet formulation with an improved acceptability has been successfully developed.

  4. Tolerability and cosmetic acceptability of liquor carbonis distillate (coal tar) solution 15% as topical therapy for plaque psoriasis.

    PubMed

    Brouda, Irina; Edison, Brenda; Van Cott, Alicia; Green, Barbara A

    2010-04-01

    Although generally recognized as an effective therapy for psoriasis, coal tar therapy lost appeal in modern clinical practice due to poor patient acceptability of its aesthetic properties. A new liquor carbonis distillate (LCD) solution 15% (equivalent to coal tar 2.3%) that uses an evaporative and transparent vehicle, fragrance, and a dab-on applicator was developed. Cosmetic acceptability of the LCD solution was compared to calcipotriene cream 0.005% during a randomized, active-controlled, investigator-blinded clinical trial. Participants with moderate plaque psoriasis applied LCD solution or calcipotriene cream twice daily to body lesions for 12 weeks and then were followed for 6 additional weeks without treatment. Participants completed a cosmetic acceptability survey about their medications after starting therapy. Mean ratings for aesthetic and product performance attributes were high in both groups; however, more participants treated with LCD solution versus calcipotriene cream rated their product as more convenient and beneficial compared to prior psoriasis therapies. Ratings of the scent, staining, drying time, and dab-on applicator for the LCD solution were favorable. Participant experience with LCD solution in this study suggests that it is a cosmetically acceptable psoriasis treatment that is comparable to calcipotriene cream.

  5. Automated Dissolution for Enteric-Coated Aspirin Tablets: A Case Study for Method Transfer to a RoboDis II.

    PubMed

    Ibrahim, Sarah A; Martini, Luigi

    2014-08-01

    Dissolution method transfer is a complicated yet common process in the pharmaceutical industry. With increased pharmaceutical product manufacturing and dissolution acceptance requirements, dissolution testing has become one of the most labor-intensive quality control testing methods. There is an increased trend for automation in dissolution testing, particularly for large pharmaceutical companies to reduce variability and increase personnel efficiency. There is no official guideline for dissolution testing method transfer from a manual, semi-automated, to automated dissolution tester. In this study, a manual multipoint dissolution testing procedure for an enteric-coated aspirin tablet was transferred effectively and reproducibly to a fully automated dissolution testing device, RoboDis II. Enteric-coated aspirin samples were used as a model formulation to assess the feasibility and accuracy of media pH change during continuous automated dissolution testing. Several RoboDis II parameters were evaluated to ensure the integrity and equivalency of dissolution method transfer from a manual dissolution tester. This current study provides a systematic outline for the transfer of the manual dissolution testing protocol to an automated dissolution tester. This study further supports that automated dissolution testers compliant with regulatory requirements and similar to manual dissolution testers facilitate method transfer. © 2014 Society for Laboratory Automation and Screening.

  6. Weight concerns scale applied to college students: comparison between pencil-and-paper and online formats.

    PubMed

    Dias, Juliana Chioda Ribeiro; Maroco, João; Campos, Juliana Alvares Duarte Bonini

    2015-03-01

    Online data collection is becoming increasingly common and has some advantages compared to traditional paper-and-pencil formats, such as reducing loss of data, increasing participants' privacy, and decreasing the effect of social desirability. However, the validity and reliability of this administration format must be established before results can be considered acceptable. The aim of this study was to evaluate the validity, reliability, and equivalence of paper-and-pencil and online versions of the Weight Concerns Scale (WCS) when applied to Brazilian university students. A crossover design was used, and the Portuguese version of the WCS (in both paper-and-pencil and online formats) was completed by 100 college students. The results indicated adequate fit in both formats. The simultaneous fit of data for both groups was excellent, with strong invariance between models. Adequate convergent validity, internal consistency, and mean score equivalence of the WCS in both formats were observed. Thus, the WCS presented adequate reliability and validity in both administration formats, with equivalence/stability between answers.

  7. The Same or Not the Same: Equivalence as an Issue in Educational Research

    NASA Astrophysics Data System (ADS)

    Lewis, Scott E.; Lewis, Jennifer E.

    2005-09-01

    In educational research, particularly in the sciences, a common research design calls for the establishment of a control and experimental group to determine the effectiveness of an intervention. As part of this design, it is often desirable to illustrate that the two groups were equivalent at the start of the intervention, based on measures such as standardized cognitive tests or student grades in prior courses. In this article we use SAT and ACT scores to illustrate a more robust way of testing equivalence. The method incorporates two one-sided t tests evaluating two null hypotheses, providing a stronger claim for equivalence than the standard method, which often does not address the possible problem of low statistical power. The two null hypotheses are based on the construction of an equivalence interval particular to the data, so the article also provides a rationale for and illustration of a procedure for constructing equivalence intervals. Our consideration of equivalence using this method also underscores the need to include sample sizes, standard deviations, and group means in published quantitative studies.

  8. Particle swarm optimization and its application in MEG source localization using single time sliced data

    NASA Astrophysics Data System (ADS)

    Lin, Juan; Liu, Chenglian; Guo, Yongning

    2014-10-01

    The estimation of neural active sources from the magnetoencephalography (MEG) data is a very critical issue for both clinical neurology and brain functions research. A widely accepted source-modeling technique for MEG involves calculating a set of equivalent current dipoles (ECDs). Depth in the brain is one of difficulties in MEG source localization. Particle swarm optimization(PSO) is widely used to solve various optimization problems. In this paper we discuss its ability and robustness to find the global optimum in different depths of the brain when using single equivalent current dipole (sECD) model and single time sliced data. The results show that PSO is an effective global optimization to MEG source localization when given one dipole in different depths.

  9. A Formal Approach to Requirements-Based Programming

    NASA Technical Reports Server (NTRS)

    Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

    2005-01-01

    No significant general-purpose method is currently available to mechanically transform system requirements into a provably equivalent model. The widespread use of such a method represents a necessary step toward high-dependability system engineering for numerous application domains. Current tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The "gap" unfilled by such tools and methods is that the formal models cannot be proven to be equivalent to the requirements. We offer a method for mechanically transforming requirements into a provably equivalent formal model that can be used as the basis for code generation and other transformations. This method is unique in offering full mathematical tractability while using notations and techniques that are well known and well trusted. Finally, we describe further application areas we are investigating for use of the approach.

  10. The Installation Restoration Program Toxicology Guide. Volume 1

    DTIC Science & Technology

    1989-07-01

    affinity for adipose tissue , which is more prevalent in women and would result in less unchanged chloroform and more carbon dioxide exhaled. This...magnesium, potassium, sodium, tin, zinc , and their alloys. ADI Acceptable daily intake ADL Arthur D. Little, Inc. Adenocarcinoma A malignant tumor...originating in glandular or ductal epithelium. Adenoma A benign growth of glandular tissue . ae Acid equivalent Aerosol A suspension or dispersion of small

  11. Union Security Agreements--Duty to Accommodate Religious Objections to Union Dues. "McDaniel v. Essex International, Inc.," 571 F.2d 338 (6th Cir. 1978).

    ERIC Educational Resources Information Center

    Reese, Mary Anne

    1979-01-01

    The holding that an employee could pay the equivalent of her union dues to a charity signifies an acceptance of accommodation and tolerance for differing religious practices in a pluralistic society. Available from Tennessee Law Review Association, Inc., 1505 W. Cumberland Ave., Knoxville, TN 37916. (Author/IRT)

  12. Rough Finite State Automata and Rough Languages

    NASA Astrophysics Data System (ADS)

    Arulprakasam, R.; Perumal, R.; Radhakrishnan, M.; Dare, V. R.

    2018-04-01

    Sumita Basu [1, 2] recently introduced the concept of a rough finite state (semi)automaton, rough grammar and rough languages. Motivated by the work of [1, 2], in this paper, we investigate some closure properties of rough regular languages and establish the equivalence between the classes of rough languages generated by rough grammar and the classes of rough regular languages accepted by rough finite automaton.

  13. Is Sexual Objectification and Victimization of Females in Video Games Associated With Victim Blaming or Victim Empathy?

    PubMed

    Beck, Victoria; Rose, Chris

    2018-04-01

    The goal of this study was to investigate whether the sexual objectification and virtual violence against females in video games increases negative attitudes toward females, when addressing a variety of noted methodological issues. Study participants were randomly assigned to a control group, where participants played Madden NFL 12, or an experimental group, where participants played Grand Theft Auto. In the experimental group, participants played the game with a confederate, who exposed participants to sexual objectification and violence against females. Study results indicated that both the experimental and control groups had equivalently low levels of rape myth acceptance prior to game play. Immediately after game play, there still was no statistically significant difference in rape myth acceptance between groups; however, there was a decrease in rape myth acceptance for the experimental group. The decrease in rape myth acceptance continued and magnified for the experimental group, over time, to the point of creating a statistically significant difference between the two groups for the follow-up measure at the end of the study.

  14. Equivalent Electromagnetic Constants for Microwave Application to Composite Materials for the Multi-Scale Problem

    PubMed Central

    Fujisaki, Keisuke; Ikeda, Tomoyuki

    2013-01-01

    To connect different scale models in the multi-scale problem of microwave use, equivalent material constants were researched numerically by a three-dimensional electromagnetic field, taking into account eddy current and displacement current. A volume averaged method and a standing wave method were used to introduce the equivalent material constants; water particles and aluminum particles are used as composite materials. Consumed electrical power is used for the evaluation. Water particles have the same equivalent material constants for both methods; the same electrical power is obtained for both the precise model (micro-model) and the homogeneous model (macro-model). However, aluminum particles have dissimilar equivalent material constants for both methods; different electric power is obtained for both models. The varying electromagnetic phenomena are derived from the expression of eddy current. For small electrical conductivity such as water, the macro-current which flows in the macro-model and the micro-current which flows in the micro-model express the same electromagnetic phenomena. However, for large electrical conductivity such as aluminum, the macro-current and micro-current express different electromagnetic phenomena. The eddy current which is observed in the micro-model is not expressed by the macro-model. Therefore, the equivalent material constant derived from the volume averaged method and the standing wave method is applicable to water with a small electrical conductivity, although not applicable to aluminum with a large electrical conductivity. PMID:28788395

  15. Markov-chain model of classified atomistic transition states for discrete kinetic Monte Carlo simulations.

    PubMed

    Numazawa, Satoshi; Smith, Roger

    2011-10-01

    Classical harmonic transition state theory is considered and applied in discrete lattice cells with hierarchical transition levels. The scheme is then used to determine transitions that can be applied in a lattice-based kinetic Monte Carlo (KMC) atomistic simulation model. The model results in an effective reduction of KMC simulation steps by utilizing a classification scheme of transition levels for thermally activated atomistic diffusion processes. Thermally activated atomistic movements are considered as local transition events constrained in potential energy wells over certain local time periods. These processes are represented by Markov chains of multidimensional Boolean valued functions in three-dimensional lattice space. The events inhibited by the barriers under a certain level are regarded as thermal fluctuations of the canonical ensemble and accepted freely. Consequently, the fluctuating system evolution process is implemented as a Markov chain of equivalence class objects. It is shown that the process can be characterized by the acceptance of metastable local transitions. The method is applied to a problem of Au and Ag cluster growth on a rippled surface. The simulation predicts the existence of a morphology-dependent transition time limit from a local metastable to stable state for subsequent cluster growth by accretion. Excellent agreement with observed experimental results is obtained.

  16. Parental Acceptability of Contraceptive Methods Offered to their Teen During a Confidential Health Care Visit

    PubMed Central

    Hartman, Lauren B; Shafer, Mary-Ann; Pollack, Lance M; Wibbelsman, Charles; Chang, Fay; Tebb, Kathleen P

    2013-01-01

    Purpose To examine parental acceptability of contraceptive methods offered confidentially to their adolescent daughter. Methods A random sample of 261 parents/guardians with a daughter between 12–17 completed a telephone survey examining the relationship between parental acceptability of seven contraceptive methods with adolescents’ likelihood to have sex, parenting beliefs, parents’ sexual health as teens, sexually transmitted infection (STI) knowledge, and demographic factors. Results Acceptability was highest for oral contraceptive pills (59%), and lowest for intrauterine device (IUD) (18%). Parental acceptance of teens’ autonomy was significantly associated with increased acceptability of all methods. Parental knowledge of STIs was poor and 51% found it acceptable for clinicians to provide their sexually active teen with condoms. Conclusion Conclusions: Parents were more accepting of OCPs and condoms, compared to IUDs and implants. Parental recognition of their teen’s autonomy was associated with greater parental acceptability of clinicians providing their adolescent with contraceptives (regardless of the specific type of method being offered). PMID:23332493

  17. Comparative study of two bowel preparaton regimens for colonoscopy: Senna tablets vs sodium phosphate solution

    PubMed Central

    Kositchaiwat, Savit; Suwanthanmma, Weerapat; Suvikapakornkul, Ronnarat; Tiewthanom, Vaewvadee; Rerkpatanakit, Prisna; Tinkornrusmee, Chaowalitr

    2006-01-01

    AIM: To compare the efficacy and acceptance of senna tablet and sodium phosphate solution for bowel preparation before colonoscopy. METHODS: One hundred and thirty four patients, who needed elective colonoscopy, were randomly allocated to take 180 mg senna tablet or 95 mL sodium phosphate solution on the day before colonoscopy. The efficacies of both laxatives were compared using the mean difference of colon-cleanliness score of the rectum, sigmoid segments, descending colon, transverse colon and cecum. The scores were rated by two observers who were blinded to the laxatives administered. The higher score means that the colon is cleaner. The efficacy of both laxatives were equivalent if the 95% confidence interval of the mean difference of the score of colon lie within -1 to +1. RESULTS: On intention-to-treat analysis, the mean cleanliness scores in the four segments of colon except the cecum were higher in the sodium phosphate group than those in senna group (7.9 ± 1.7 vs 8.3 ± 1.5, 8.0 ± 1.8 vs 8.5 ± 1.4, 7.9 ± 2.0 vs 8.5 ± 1.3, 7.9 ± 2.0 vs 8.2 ± 1.4 and 7.2 ± 1.7 vs 6.9 ± 1.4, respectively). The 95% confidence intervals (95% CI) of mean difference in each segment of colon were not found to lie within 1 point which indicated that their efficacies were not equivalent. The taste of senna was better than sodium phosphate solution. Also, senna had fewer side effects. CONCLUSION: The efficacy of senna is not equivalent to sodium phosphate solution in bowel preparation for colonoscopy, but senna may be considered an alternative laxative. PMID:17006995

  18. A novel narrow profile articulating powered vascular stapler provides superior access and haemostasis equivalent to conventional devices†

    PubMed Central

    Ng, Calvin S.H.; Pickens, Allan; Siegel, Julianne M.; Clymer, Jeffrey W.; Cummings, John F.

    2016-01-01

    OBJECTIVE Current endoscopic transection devices are not optimized to meet the unique challenges posed by the task of vessel transection in difficult-to-access locations within the pleural cavity. The ECHELON FLEX™ powered vascular stapler (PVS) has been designed with four rows of staples instead of six, to decrease its size and enable more precise placement on fragile pulmonary vessels, using a narrower anvil than other commercially available transecting devices. This study was performed to determine whether the reduced number of staple rows affects haemostasis, and to assess surgeons' initial impression of the smaller stapler during in vivo usage. METHODS The new four-row stapler was compared with commercially available six-row articulating staplers via expert graders using a validated scale of haemostasis in vivo after application on porcine gastroepiploic pedicles and other thin- and thick-walled vessels. The new stapler was then compared with current products by practising thoracic surgeons (n = 27) during in vivo usage of simulated pulmonary procedures in a porcine model. The surgeons were also surveyed on the key attributes of the four-row stapler in relation to the six-row predicates. RESULTS Haemostasis evaluated on an ordered scale was clinically equivalent between the test and predicate staplers, and was deemed acceptable for all thin- and thick-vascular tissue applications. Surgeons found no difference in haemostasis between the four- and six-row staplers (P = 0.486), and judged the four-row stapler superior in terms of access, reduced need for dissection, reduced stress of surgeon and precise control (P < 0.001 for all). CONCLUSIONS The new ECHELON FLEX™ PVS provides haemostasis equivalent to six-row staplers. With a smaller anvil, narrower shaft and wider angle of articulation, the PVS demonstrated improved access capability for pulmonary vessel procedures. PMID:26464450

  19. Should non-disclosures be considered as morally equivalent to lies within the doctor-patient relationship?

    PubMed

    Cox, Caitriona L; Fritz, Zoe

    2016-10-01

    In modern practice, doctors who outright lie to their patients are often condemned, yet those who employ non-lying deceptions tend to be judged less critically. Some areas of non-disclosure have recently been challenged: not telling patients about resuscitation decisions; inadequately informing patients about risks of alternative procedures and withholding information about medical errors. Despite this, there remain many areas of clinical practice where non-disclosures of information are accepted, where lies about such information would not be. Using illustrative hypothetical situations, all based on common clinical practice, we explore the extent to which we should consider other deceptive practices in medicine to be morally equivalent to lying. We suggest that there is no significant moral difference between lying to a patient and intentionally withholding relevant information: non-disclosures could be subjected to Bok's 'Test of Publicity' to assess permissibility in the same way that lies are. The moral equivalence of lying and relevant non-disclosure is particularly compelling when the agent's motivations, and the consequences of the actions (from the patient's perspectives), are the same. We conclude that it is arbitrary to claim that there is anything inherently worse about lying to a patient to mislead them than intentionally deceiving them using other methods, such as euphemism or non-disclosure. We should question our intuition that non-lying deceptive practices in clinical practice are more permissible and should thus subject non-disclosures to the same scrutiny we afford to lies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  20. Examining the Feasibility of Smartphone Game Applications for Physical Activity Promotion in Middle School Students.

    PubMed

    Blackman, Kacie C A; Zoellner, Jamie; Kadir, Adil; Dockery, Brandon; Johnson, Sallie Beth; Almeida, Fabio A; McCrickard, D Scott; Hill, Jennie L; You, Wen; Estabrooks, Paul A

    2015-10-01

    The objective of this study was to determine the feasibility (i.e., limited efficacy testing, practicality, and acceptability) of a 6-week smartphone game-based applications program for promoting physical activity (PA) in adolescents in an afterschool program. This mixed-method, quasi-experimental design study included 27 adolescents who evaluated four smartphone PA game-based applications in two Boys & Girls Clubs of America. After an initial baseline week (i.e., usual activity during their visit to the Club), adolescents played each game for 1 week. During a final week, the participants could choose to play any combination of the four games. An established conceptual framework was used to assess feasibility. Efficacy was assessed by changes in PA via wrist-worn accelerometers (model GT3x+; ActiGraph LLC, Pensacola, FL). Practicality was measured through field notes, the number of players attending each session, and the proportion of attendees who played the games. Acceptability was measured using poststudy focus groups. Compared with baseline (3.22 metabolic equivalents [METs]), mean accelerometer values were significantly (P<0.05) higher during "Space Rayders" (4.33 METs) and "Color Hunt" (3.67 METs). Attendance did not differ among games, and weekly number of players averaged 12 of 27 participants. Qualitative findings indicated that participants perceived "Space Rayders" as the most acceptable game. Overall, participants found the games to be enjoyable and easy to use, although they had suggestions to improve graphics and sounds. Smartphone games can be feasible for adolescents to use for PA. Lessons learned will be used to provide improvements for future game development and evaluation.

  1. Change in knowledge of women about cervix cancer, human papilloma virus (HPV) and HPV vaccination due to introduction of HPV vaccines.

    PubMed

    Donders, Gilbert G G; Bellen, Gert; Declerq, Ann; Berger, Judith; Van Den Bosch, Thierry; Riphagen, Ine; Verjans, Marcel

    2009-07-01

    Test knowledge of HPV, cervix cancer awareness and acceptance of HPV vaccination of women now and a year ago. Questionnaires were filled out by 305 women visiting four gynaecologists of the Regional Hospital Heilig Hart, Tienen, Belgium during two subsequent weeks. Fisher T or Chi(2) were used as statistical methods to compare the data with the survey of 381 women exactly one year before. Knowledge about HPV as a cause of cervix cancer and the presence of a vaccine rose from roughly 50% in 2007 to over 80% in 2008 (p<0.0001). Level of education and having daughters, sons or no children no longer influenced the level of knowledge or willingness to accept the vaccine. Most parents favor the age group 12-16 years as an ideal time for vaccination. In contrast with the 2007 survey, women below 26 years had now acquired almost equivalent knowledge to older women about the virus, cervix cancer and the vaccine, but they were far less likely to accept the vaccine due to its cost, unless it would be reimbursed (OR 4.2 (1.6-11) p=0.0055). One year after introduction of the first two HPV vaccines, over 75% of women attending an ambulatory gynaecology clinic know HPV causes cervix cancer and that you can get vaccinated against it. Compared with a year earlier, young and lower educated women had dramatically improved their knowledge. However, women below 26 years are less prepared to pay the cost for vaccination if it is not reimbursed.

  2. Recruitment, Methods, and Descriptive Results of a Physiologic Assessment of Latino Farmworkers: The California Heat Illness Prevention Study.

    PubMed

    Mitchell, Diane C; Castro, Javier; Armitage, Tracey L; Vega-Arroyo, Alondra J; Moyce, Sally C; Tancredi, Daniel J; Bennett, Deborah H; Jones, James H; Kjellstrom, Tord; Schenker, Marc B

    2017-07-01

    The California heat illness prevention study (CHIPS) devised methodology and collected physiological data to assess heat related illness (HRI) risk in Latino farmworkers. Bilingual researchers monitored HRI across a workshift, recording core temperature, work rate (metabolic equivalents [METs]), and heart rate at minute intervals. Hydration status was assessed by changes in weight and blood osmolality. Personal data loggers and a weather station measured exposure to heat. Interviewer administered questionnaires were used to collect demographic and occupational information. California farmworkers (n = 588) were assessed. Acceptable quality data was obtained from 80% of participants (core temperature) to 100% of participants (weight change). Workers (8.3%) experienced a core body temperature more than or equal to 38.5 °C and 11.8% experienced dehydration (lost more than 1.5% of body weight). Methodology is presented for the first comprehensive physiological assessment of HRI risk in California farmworkers.

  3. Lessons Learned: Cultural and linguistic enhancement of surveys through community-based participatory research

    PubMed Central

    Formea, Christine M.; Mohamed, Ahmed A.; Hassan, Abdullahi; Osman, Ahmed; Weis, Jennifer A.; Sia, Irene G.; Wieland, Mark L.

    2014-01-01

    Background Surveys are frequently implemented in community-based participatory research (CBPR), but adaptation and translation of surveys can be logistically and methodologically challenging when working with immigrant and refugee populations. Objective To describe a process of participatory survey adaptation and translation. Methods Within an established CBPR partnership, a survey about diabetes was adapted for health literacy and local relevance and then translated through a process of forward translation, group deliberation, and back translation. Lessons Learned The group deliberation process was the most time-intensive and important component of the process. The process enhanced community ownership of the larger project while maximizing local applicability of the product. Conclusions A participatory process of survey adaptation and translation resulted in significant revisions to approximate semantic, cultural, and conceptual equivalence with the original surveys. This approach is likely to enhance community acceptance of the survey instrument during the implementation phase. PMID:25435559

  4. Increasing the revenue from lignocellulosic biomass: Maximizing feedstock utilization

    PubMed Central

    Alonso, David Martin; Hakim, Sikander H.; Zhou, Shengfei; Won, Wangyun; Hosseinaei, Omid; Tao, Jingming; Garcia-Negron, Valerie; Motagamwala, Ali Hussain; Mellmer, Max A.; Huang, Kefeng; Houtman, Carl J.; Labbé, Nicole; Harper, David P.; Maravelias, Christos T.; Runge, Troy; Dumesic, James A.

    2017-01-01

    The production of renewable chemicals and biofuels must be cost- and performance- competitive with petroleum-derived equivalents to be widely accepted by markets and society. We propose a biomass conversion strategy that maximizes the conversion of lignocellulosic biomass (up to 80% of the biomass to useful products) into high-value products that can be commercialized, providing the opportunity for successful translation to an economically viable commercial process. Our fractionation method preserves the value of all three primary components: (i) cellulose, which is converted into dissolving pulp for fibers and chemicals production; (ii) hemicellulose, which is converted into furfural (a building block chemical); and (iii) lignin, which is converted into carbon products (carbon foam, fibers, or battery anodes), together producing revenues of more than $500 per dry metric ton of biomass. Once de-risked, our technology can be extended to produce other renewable chemicals and biofuels. PMID:28560350

  5. Increasing the revenue from lignocellulosic biomass: Maximizing feedstock utilization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alonso, David Martin; Hakim, Sikander H.; Zhou, Shengfei

    The production of renewable chemicals and biofuels must be cost- and performance- competitive with petroleum-derived equivalents to be widely accepted by markets and society. We propose a biomass conversion strategy that maximizes the conversion of lignocellulosic biomass (up to 80% of the biomass to useful products) into high-value products that can be commercialized, providing the opportunity for successful translation to an economically viable commercial process. Our fractionation method preserves the value of all three primary components: (i) cellulose, which is converted into dissolving pulp for fibers and chemicals production; (ii) hemicellulose, which is converted into furfural (a building block chemical);more » and (iii) lignin, which is converted into carbon products (carbon foam, fibers, or battery anodes), together producing revenues of more than $500 per dry metric ton of biomass. Once de-risked, our technology can be extended to produce other renewable chemicals and biofuels.« less

  6. Atomic emission spectrometer/spectrograph for the determination of barium in microamounts of diatom ash

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bankston, D.C.; Fisher, N.S.

    1977-06-01

    The development and routine application of a method for the determination of trace levels of barium in microsamples (5-10 mg) of diatom ash is described Acid-dissolved lithium metaborate fusion melts of ash samples are analyzed using a spectrometer/spectrograph equipped with a dc argon plasma jet excitation source and an echelle diffraction grating. Sample, standard, and blank solutions are buffered by lithium contributed by the flux, to a degree sufficient to reduce matrix effects to acceptable levels. Previous barium determinations by other analytical techniques, on seven interlaboratory reference materials, have been used to establish the accuracy of our results. The averagemore » relative standard deviation for the instrumental analyses was 0.07. Using recommended instrument settings, moreover, the lowest concentration of barium visible in synthetic standard solutions lies just below 2 ..mu..g/L, which is equivalent to 2 ..mu..g/g in the ash.« less

  7. Standards of nutrition for athletes in Germany.

    PubMed

    Diel, F; Khanferyan, R A

    2013-01-01

    The Deutscher Olympische Sportbund (DOSB) founded recently an advisory board for German elite athlete nutrition, the 'Arbeitsgruppe (AG) Ernahrungsberatung an den Olympiastutzpunkten'. The 'Performance codex and quality criteria for the food supply in facilities of German elite sports' have been established since 1997. The biochemical equivalent (ATP) for the energy demand is calculated using the DLW (Double Labeled Water)-method on the basis of RMR (Resting Metabolic Rate) and BMR (Basic Metabolic Rate) at sport type specific exercises and performances. Certain nutraceutical ingredients for dietary supplements can be recommended. However, quality criteria for nutrition, cooking and food supply are defined on the basis of Health Food and the individual physiological/social-psychological status of the athlete. Especially food supplements and instant food have to be avoided for young athletes. The German advisory board for elite athlete nutrition publishes 'colour lists' for highly recommended (green), acceptable (yellow), and less recommended (red) food stuff.

  8. Web-based learning: pros, cons and controversies.

    PubMed

    Cook, David A

    2007-01-01

    Advantages of web-based learning (WBL) in medical education include overcoming barriers of distance and time, economies of scale, and novel instructional methods, while disadvantages include social isolation, up-front costs, and technical problems. Web-based learning is purported to facilitate individualised instruction, but this is currently more vision than reality. More importantly, many WBL instructional designs fail to incorporate principles of effective learning, and WBL is often used for the wrong reasons (e.g., for the sake of technology). Rather than trying to decide whether WBL is superior to or equivalent to other instructional media (research addressing this question will always be confounded), we should accept it as a potentially powerful instructional tool, and focus on learning when and how to use it. Educators should recognise that high fidelity, multimedia, simulations, and even WBL itself will not always be necessary to effectively facilitate learning.

  9. Increasing the revenue from lignocellulosic biomass: Maximizing feedstock utilization

    DOE PAGES

    Alonso, David Martin; Hakim, Sikander H.; Zhou, Shengfei; ...

    2017-05-19

    The production of renewable chemicals and biofuels must be cost- and performance- competitive with petroleum-derived equivalents to be widely accepted by markets and society. We propose a biomass conversion strategy that maximizes the conversion of lignocellulosic biomass (up to 80% of the biomass to useful products) into high-value products that can be commercialized, providing the opportunity for successful translation to an economically viable commercial process. Our fractionation method preserves the value of all three primary components: (i) cellulose, which is converted into dissolving pulp for fibers and chemicals production; (ii) hemicellulose, which is converted into furfural (a building block chemical);more » and (iii) lignin, which is converted into carbon products (carbon foam, fibers, or battery anodes), together producing revenues of more than $500 per dry metric ton of biomass. Once de-risked, our technology can be extended to produce other renewable chemicals and biofuels.« less

  10. Modified methods for growing 3-D skin equivalents: an update.

    PubMed

    Lamb, Rebecca; Ambler, Carrie A

    2014-01-01

    Artificial epidermis can be reconstituted in vitro by seeding primary epidermal cells (keratinocytes) onto a supportive substrate and then growing the developing skin equivalent at the air-liquid interface. In vitro skin models are widely used to study skin biology and for industrial drug and cosmetic testing. Here, we describe updated methods for growing 3-dimensional skin equivalents using de-vitalized, de-epidermalized dermis (DED) substrates including methods for DED substrate preparation, cell seeding, growth conditions, and fixation procedures.

  11. 40 CFR Table E-1 to Subpart E of... - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM 2.5 and PM 10-2.5

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... accuracy 3. Filter temp. control accuracy, sampling and non-sampling 1. 2 °C2. 2 °C 3. Not more than 5 °C... Reference and Class I Equivalent Methods for PM 2.5 and PM 10-2.5 E Table E-1 to Subpart E of Part 53... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance...

  12. 40 CFR Table E-1 to Subpart E of... - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... accuracy 3. Filter temp. control accuracy, sampling and non-sampling 1. 2 °C2. 2 °C 3. Not more than 5 °C... Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5 E Table E-1 to Subpart E of Part 53... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance...

  13. 40 CFR Table E-1 to Subpart E of... - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... accuracy 3. Filter temp. control accuracy, sampling and non-sampling 1. 2 °C2. 2 °C 3. Not more than 5 °C... Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5 E Table E-1 to Subpart E of Part 53... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance...

  14. 40 CFR Table E-1 to Subpart E of... - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM 2.5 and PM 10-2.5

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... accuracy 3. Filter temp. control accuracy, sampling and non-sampling 1. 2 °C2. 2 °C 3. Not more than 5 °C... Reference and Class I Equivalent Methods for PM 2.5 and PM 10-2.5 E Table E-1 to Subpart E of Part 53... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance...

  15. Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation

    NASA Technical Reports Server (NTRS)

    Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

    2004-01-01

    A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including sensor networks and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.

  16. Towards an Automated Development Methodology for Dependable Systems with Application to Sensor Networks

    NASA Technical Reports Server (NTRS)

    Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

    2005-01-01

    A general-purpose method to mechanically transform system requirements into a probably equivalent model has yet to appeal: Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including sensor networks and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a probably equivalent implementation are valuable but not su8cient. The "gap" unfilled by such tools and methods is that their. formal models cannot be proven to be equivalent to the system requirements as originated by the customel: For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a probably equivalent formal model that can be used as the basis for code generation and other transformations.

  17. Mixed-methods development of a new patient-reported outcome instrument for chronic low back pain: part 1-the Patient Assessment for Low Back Pain - Symptoms (PAL-S).

    PubMed

    Martin, Mona L; Blum, Steven I; Liedgens, Hiltrud; Bushnell, Donald M; McCarrier, Kelly P; Hatley, Noël V; Ramasamy, Abhilasha; Freynhagen, Rainer; Wallace, Mark; Argoff, Charles; Eerdekens, Mariёlle; Kok, Maurits; Patrick, Donald L

    2018-06-01

    We describe the mixed-methods (qualitative and quantitative) development and preliminary validation of the Patient Assessment for Low Back Pain-Symptoms (PAL-S), a patient-reported outcome measure for use in chronic low back pain (cLBP) clinical trials. Qualitative methods (concept elicitation and cognitive interviews) were used to identify and refine symptom concepts and quantitative methods (classical test theory and Rasch measurement theory) were used to evaluate item- and scale-level performance of the measure using an iterative approach. Patients with cLBP participated in concept elicitation interviews (N = 43), cognitive interviews (N = 38), and interview-based assessment of paper-to-electronic mode equivalence (N = 8). A web-based sample of patients with self-reported cLBP participated in quantitative studies to evaluate preliminary (N = 598) and revised (n = 401) drafts and a physician-diagnosed cohort of patients with cLBP (N = 45) participated in preliminary validation of the measure. The PAL-S contained 14 items describing symptoms (overall pain, sharp, prickling, sensitive, tender, radiating, shocking, shooting, burning, squeezing, muscle spasms, throbbing, aching, and stiffness). Item-level performance, scale structure, and scoring seemed to be appropriate. One-week test-retest reproducibility was acceptable (intraclass correlation coefficient 0.81 [95% confidence interval, 0.61-0.91]). Convergent validity was demonstrated with total score and MOS-36 Bodily Pain (Pearson correlation -0.79), Neuropathic Pain Symptom Inventory (0.73), Roland-Morris Disability Questionnaire (0.67), and MOS-36 Physical Functioning (-0.65). Individual item scores and total score discriminated between numeric rating scale tertile groups and painDETECT categories. Respondent interpretation of paper and electronic administration modes was equivalent. The PAL-S has demonstrated content validity and is potentially useful to assess treatment benefit in cLBP clinical trials.

  18. Factors associated with the acceptance of sugar and sugar substitutes by the public.

    PubMed

    Mackay, D A

    1985-09-01

    Acceptance is described in both market and sensory research terminology and recent developments in the fields of applied psychology and physiology are examined for their pertinence to public acceptance of sucrose and its substitutes. Information on the function of sucrose in foods other than beverages is presented with emphasis on salivation as an acceptance factor and attention is drawn to its possible dental significance. Distinctions are made between the sweetening and bulking properties of sucrose and sugar substitutes. Factors having a bearing on the acceptance of sweet foods and the determination of their optimal sugar content are described in detail. While major decreases in sucrose intake in the US resulted from high-fructose corn-sweetener usage in soft drinks, no evidence is yet available to suggest that the use of sugar substitutes of the intense artificial sweetener type has caused any decrease in ordinary sugar consumption. Neither is the consumption of polyols (sorbitol, mannitol, xylitol) high enough in confectionery categories to cause any discernible decrease in sugar usage. The evidence suggests not so much that sugar substitutes may have stopped the growth in sucrose usage, but that new product categories such as diet foods and "sugarless' confections may have been created. These categories were never available to fermentable carbohydrate sweeteners and equivalence in acceptance to sucrose-sweetened products was not an important factor in their growth.(ABSTRACT TRUNCATED AT 250 WORDS)

  19. 2000 CENSUS Analysis of Fiscal Year 2000 Budget and Internal Control Weaknesses at the U.S. Census Bureau

    DTIC Science & Technology

    2001-12-01

    Act of 1996 FMFIA Federal Managers’ Financial Integrity Act of 1982 FTE full-time equivalent GAAP generally...statements.11 This guidance requires that financial statements be prepared in accordance with U.S. generally accepted accounting principles ( GAAP )12 and the...Federal Financial Statements. 12The Federal Accounting Standards Advisory Board promulgates GAAP for federal government entities. Annual Financial

  20. Training Grant in Epidemiology and Prevention of Breast Cancer

    DTIC Science & Technology

    2005-07-01

    progesterone receptor gene expression in human breast cancer. J Mammary Gland Biol progesterone , medroxyprogesterone acetate and noretpisterone on the...an R01- equivalent research proposal to the American Cancer Society in October 2003 (resubmitted in April 2004). The goal of the proposal is to develop... progesterone concentrations and breast cancer risk among postmenopausal womenŕ". "* Ms. Sonia (Matthews) Maruti had an abstract accepted to "Breast Cancer

  1. Flexible Manufacturing System Handbook. Volume IV. Appendices

    DTIC Science & Technology

    1983-02-01

    and Acceptance Test(s)" on page 26 of this Proposal Request. 1.1.10 Options 1. Centralized Automatic Chip/Coolant Recovery System a. Scope The...viable, from manual- ly moving the pallet/fixture/part combinations from machine to machine to fully automatic , unmanned material handling systems , such...English. Where dimensions are shown in metric units, the English system (inch) equivalent will also be shown. Hydraulic, pneumatic , and electrical

  2. Objectively Measured Physical Activity in Home Guard Soldiers During Military Service and Civilian Life.

    PubMed

    Aandstad, Anders; Hageberg, Rune; Holme, Ingar M; Anderssen, Sigmund A

    2016-07-01

    Soldiers are encouraged to be physically active, and thereby maintain or increase their fitness level to meet job-related physical demands. However, studies on objectively measured physical activity (PA) in soldiers are scarce, particular for reserve soldiers. Hence, the aim of this study was to present PA data on Norwegian Home Guard (HG) soldiers. A total of 411 HG soldiers produced acceptable PA measurements (SenseWear Armband Pro2) during civilian life, of which 299 soldiers also produced acceptable data during HG military training. Reference data on total energy expenditure, metabolic equivalents, steps per day, and minutes of PA in three different metabolic equivalent categories are presented. The HG soldiers produced more minutes of moderate PA during HG military training compared to civilian life, but less vigorous and very vigorous PA. Furthermore, HG soldiers were more physically active during civilian week days compared to weekend days. The presented reference data can be used for comparisons against other groups of soldiers. Our data indicate that aerobic demands during HG military training were not very high. Promoting PA and exercise could still be important to ensure HG soldiers are physically prepared for more unforeseen job tasks. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  3. Heat, work and subtle fluids: a commentary on Joule (1850) ‘On the mechanical equivalent of heat’

    PubMed Central

    Young, John

    2015-01-01

    James Joule played the major role in establishing the conservation of energy, or the first law of thermodynamics, as a universal, all-pervasive principle of physics. He was an experimentalist par excellence and his place in the development of thermodynamics is unarguable. This article discusses Joule's life and scientific work culminating in the 1850 paper, where he presented his detailed measurements of the mechanical equivalent of heat using his famous paddle-wheel apparatus. Joule's long series of experiments in the 1840s leading to his realisation that the conservation of energy was probably of universal validity is discussed in context with the work of other pioneers, notably Sadi Carnot, who effectively formulated the principle of the second law of thermodynamics a quarter of a century before the first law was accepted. The story of Joule's work is a story of an uphill struggle against a critical scientific establishment unwilling to accept the mounting evidence until it was impossible to ignore. His difficulties in attracting funding and publishing in reputable journals despite the quality of his work will resonate with many young scientists and engineers of the present day. This commentary was written to celebrate the 350th anniversary of the journal Philosophical Transactions of the Royal Society. PMID:25750152

  4. Minimal norm constrained interpolation. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Irvine, L. D.

    1985-01-01

    In computational fluid dynamics and in CAD/CAM, a physical boundary is usually known only discreetly and most often must be approximated. An acceptable approximation preserves the salient features of the data such as convexity and concavity. In this dissertation, a smooth interpolant which is locally concave where the data are concave and is locally convex where the data are convex is described. The interpolant is found by posing and solving a minimization problem whose solution is a piecewise cubic polynomial. The problem is solved indirectly by using the Peano Kernal theorem to recast it into an equivalent minimization problem having the second derivative of the interpolant as the solution. This approach leads to the solution of a nonlinear system of equations. It is shown that Newton's method is an exceptionally attractive and efficient method for solving the nonlinear system of equations. Examples of shape-preserving interpolants, as well as convergence results obtained by using Newton's method are also shown. A FORTRAN program to compute these interpolants is listed. The problem of computing the interpolant of minimal norm from a convex cone in a normal dual space is also discussed. An extension of de Boor's work on minimal norm unconstrained interpolation is presented.

  5. [Application of robustness test for assessment of the measurement uncertainty at the end of development phase of a chromatographic method for quantification of water-soluble vitamins].

    PubMed

    Ihssane, B; Bouchafra, H; El Karbane, M; Azougagh, M; Saffaj, T

    2016-05-01

    We propose in this work an efficient way to evaluate the measurement of uncertainty at the end of the development step of an analytical method, since this assessment provides an indication of the performance of the optimization process. The estimation of the uncertainty is done through a robustness test by applying a Placquett-Burman design, investigating six parameters influencing the simultaneous chromatographic assay of five water-soluble vitamins. The estimated effects of the variation of each parameter are translated into standard uncertainty value at each concentration level. The values obtained of the relative uncertainty do not exceed the acceptance limit of 5%, showing that the procedure development was well done. In addition, a statistical comparison conducted to compare standard uncertainty after the development stage and those of the validation step indicates that the estimated uncertainty are equivalent. The results obtained show clearly the performance and capacity of the chromatographic method to simultaneously assay the five vitamins and suitability for use in routine application. Copyright © 2015 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

  6. Natural radioactivity measurements of building materials in Baotou, China.

    PubMed

    Zhao, Caifeng; Lu, Xinwei; Li, Nan; Yang, Guang

    2012-12-01

    Natural radioactivity due to (226)Ra, (232)Th and (40)K in the common building materials collected from Baotou city of Inner Mongolia, China was measured using gamma-ray spectrometry. The radiation hazard of the studied building materials was estimated by the radium equivalent activity (Ra(eq)), internal hazard index (H(in)) and annual effective dose (AED). The concentrations of the natural radionuclides and Ra(eq) in the studied samples were compared with the corresponding results of other countries. The Ra(eq) values of the building materials are below the internationally accepted values (370 Bq kg(-1)). The values of H(in) in all studied building materials are less than unity. The AEDs of all measured building materials are at an acceptable level.

  7. A survey of the Australasian clinical medical physics and biomedical engineering workforce.

    PubMed

    Round, W H

    2007-03-01

    A survey of the medical physics and biomedical engineering workforce was carried out in 2006. 495 positions (equivalent to 478 equivalent full time (EFT) positions) were captured by the survey. Of these 268 EFT were in radiation oncology physics, 36 EFT were in radiology physics, 44 were in nuclear medicine physics, 101 EFT were in biomedical engineering and 29 EFT were attributed to other activities. The survey reviewed the experience profile, the salary levels and the number of vacant positions in the workforce for the different disciplines in each Australian state and in New Zealand. Analysis of the data identifies staffing shortfalls in the various disciplines and demonstrates the difficulties that will occur in trying to train sufficient physicists to raise staffing to an acceptable level.

  8. Effects of Heterogeneous Social Interactions on Flocking Dynamics

    NASA Astrophysics Data System (ADS)

    Miguel, M. Carmen; Parley, Jack T.; Pastor-Satorras, Romualdo

    2018-02-01

    Social relationships characterize the interactions that occur within social species and may have an important impact on collective animal motion. Here, we consider a variation of the standard Vicsek model for collective motion in which interactions are mediated by an empirically motivated scale-free topology that represents a heterogeneous pattern of social contacts. We observe that the degree of order of the model is strongly affected by network heterogeneity: more heterogeneous networks show a more resilient ordered state, while less heterogeneity leads to a more fragile ordered state that can be destroyed by sufficient external noise. Our results challenge the previously accepted equivalence between the static Vicsek model and the equilibrium X Y model on the network of connections, and point towards a possible equivalence with models exhibiting a different symmetry.

  9. The Strengths and Difficulties Questionnaire (SDQ): Factor Structure and Gender Equivalence in Norwegian Adolescents.

    PubMed

    Bøe, Tormod; Hysing, Mari; Skogen, Jens Christoffer; Breivik, Kyrre

    2016-01-01

    Although frequently used with older adolescents, few studies of the factor structure, internal consistency and gender equivalence of the SDQ exists for this age group, with inconsistent findings. In the present study, confirmatory factor analysis (CFA) was used to evaluate the five-factor structure of the SDQ in a population sample of 10,254 16-18 year-olds from the youth@hordaland study. Measurement invariance across gender was assessed using multigroup CFA. A modestly modified five-factor solution fitted the data acceptably, accounting for one cross loading and some local dependencies. Importantly, partial measurement non-invariance was identified, with differential item functioning in eight items, and higher correlations between emotional and conduct problems for boys compared to girls. Implications for use clinically and in research are discussed.

  10. 40 CFR 53.1 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... followed by a gravimetric mass determination, but which is not a Class I equivalent method because of... MONITORING REFERENCE AND EQUIVALENT METHODS General Provisions § 53.1 Definitions. Terms used but not defined... slope of a linear plot fitted to corresponding candidate and reference method mean measurement data...

  11. 77 FR 32632 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-01

    ... Hydrogen Peroxide Filter Extraction'' In this method, total suspended particulate matter (TSP) is collected on glass fiber filters according to 40 CFR Appendix G to part 50, EPA Reference Method for the Determination of Lead in Suspended Particulate Matter Collected From Ambient Air. The filter samples are...

  12. Cultural adaptation of a supportive care needs measure for Hispanic men cancer survivors.

    PubMed

    Martinez Tyson, Dinorah; Medina-Ramirez, Patricia; Vázquez-Otero, Coralia; Gwede, Clement K; Bobonis, Margarita; McMillan, Susan C

    2018-01-01

    Research with ethnic minority populations requires instrumentation that is cultural and linguistically relevant. The aim of this study was to translate and culturally adapt the Cancer Survivor Unmet Needs measure into Spanish. We describe the iterative, community-engaged consensus-building approaches used to adapt the instrument for Hispanic male cancer survivors. We used an exploratory sequential mixed method study design. Methods included translation and back-translation, focus groups with cancer survivors (n = 18) and providers (n = 5), use of cognitive interview techniques to evaluate the comprehension and acceptability of the adapted instrument with survivors (n = 12), ongoing input from the project's community advisory board, and preliminary psychometric analysis (n = 84). The process emphasized conceptual, content, semantic, and technical equivalence. Combining qualitative and quantitative approaches offered a rigorous, systematic, and contextual approach to translation alone and supports the cultural adaptation of this measure in a purposeful and relevant manner. Our findings highlight the importance of going beyond translation when adapting measures for cross-cultural populations and illustrate the importance of taking culture, literacy, and language into consideration.

  13. Comparison of methods of predicting community response to impulsive and nonimpulsive noise

    NASA Technical Reports Server (NTRS)

    Fidell, Sanford; Pearsons, Karl S.

    1994-01-01

    Several scientific, regulatory, and policy-coordinating bodies have developed methods for predicting community response to sonic booms. The best known of these is the dosage-response relationship of Working Group 84 of the National Academy of Science's Committee on Hearing, Bioacoustics and Biomechanics. This dosage-response relationship between C-weighted DayNight Average Sound Level and the prevalence of annoyance with high energy impulsive sounds was derived from limited amounts of information about community response to regular, prolonged, and expected exposure to artillery and sonic booms. U.S. Army Regulation 201 adapts this approach to predictions of the acceptability of impulsive noise exposure in communities. This regulation infers equivalent degrees of effect with respect to a well known dosage-response relationship for general (nonimpulsive) transportation noise. Differences in prevalence of annoyance predicted by various relationships lead to different predictions of the compatibility of land uses with sonic boom exposure. An examination of these differences makes apparent several unresolved issues in current practice for predicting and interpreting the prevalence of annoyance due to sonic boom exposure.

  14. Intermediate-Term Outcomes of Dual Adult versus Single-Kidney Transplantation: Evolution of a Surgical Technique.

    PubMed

    Islam, Ana K; Knight, Richard J; Mayer, Wesley A; Hollander, Adam B; Patel, Samir; Teeter, Larry D; Graviss, Edward A; Saharia, Ashish; Podder, Hemangshu; Asham, Emad H; Gaber, A Osama

    2016-01-01

    Background. Acceptance of dual kidney transplantation (DKT) has proven difficult, due to surgical complexity and concerns regarding long-term outcomes. We herein present a standard technique for ipsilateral DKT and compare outcomes to single-kidney transplant (SKT) recipients. Methods. A retrospective single-center comparison of DKT and SKT performed between February 2007 and July 2013. Results. Of 516 deceased donor kidney transplants, 29 were DKT and 487 were SKT. Mean follow-up was 43 ± 67 months. DKT recipients were older and more likely than SKT recipients to receive an extended criteria graft (p < 0.001). For DKT versus SKT, the rates of delayed graft function (10.3 versus 9.2%) and acute rejection (20.7 versus 22.4%) were equivalent (p = ns). A higher than expected urologic complication rate in the DKT cohort (14 versus 2%, p < 0.01) was reduced through modification of the ureteral anastomosis. Graft survival was equivalent between DKT and SKT groups (p = ns) with actuarial 3-year DKT patient and graft survivals of 100% and 93%. At 3 years, the groups had similar renal function (p = ns). Conclusions. By utilizing extended criteria donor organs as DKT, the donor pool was enlarged while providing excellent patient and graft survival. The DKT urologic complication rate was reduced by modification of the ureteral anastomosis.

  15. Intermediate-Term Outcomes of Dual Adult versus Single-Kidney Transplantation: Evolution of a Surgical Technique

    PubMed Central

    Islam, Ana K.; Mayer, Wesley A.; Hollander, Adam B.; Patel, Samir; Teeter, Larry D.; Graviss, Edward A.; Saharia, Ashish; Podder, Hemangshu; Asham, Emad H.; Gaber, A. Osama

    2016-01-01

    Background. Acceptance of dual kidney transplantation (DKT) has proven difficult, due to surgical complexity and concerns regarding long-term outcomes. We herein present a standard technique for ipsilateral DKT and compare outcomes to single-kidney transplant (SKT) recipients. Methods. A retrospective single-center comparison of DKT and SKT performed between February 2007 and July 2013. Results. Of 516 deceased donor kidney transplants, 29 were DKT and 487 were SKT. Mean follow-up was 43 ± 67 months. DKT recipients were older and more likely than SKT recipients to receive an extended criteria graft (p < 0.001). For DKT versus SKT, the rates of delayed graft function (10.3 versus 9.2%) and acute rejection (20.7 versus 22.4%) were equivalent (p = ns). A higher than expected urologic complication rate in the DKT cohort (14 versus 2%, p < 0.01) was reduced through modification of the ureteral anastomosis. Graft survival was equivalent between DKT and SKT groups (p = ns) with actuarial 3-year DKT patient and graft survivals of 100% and 93%. At 3 years, the groups had similar renal function (p = ns). Conclusions. By utilizing extended criteria donor organs as DKT, the donor pool was enlarged while providing excellent patient and graft survival. The DKT urologic complication rate was reduced by modification of the ureteral anastomosis. PMID:27478630

  16. Pharmacokinetics and Bioequivalence Evaluation of 2 Loxoprofen Tablets in Healthy Egyptian Male Volunteers.

    PubMed

    Helmy, Sally A

    2013-04-01

    The objective of this study was to assess the in vitro dissolution and to evaluate the bioavailability of two brands of Loxoprofen sodium dihydrate tablets. Loxoprofen tablets (68.1 mg loxoprofen sodium dihydrate equivalent to 60 mg loxoprofen; test) relative to Roxonin tablets (68.1 mg loxoprofen sodium dihydrate equivalent to 60 mg loxoprofen; reference). In vitro study was adopted to determine and compare the dissolution behavior of both products. In vivo study was conducted according to a single-center, randomized, single-dose, and laboratory-blinded, 2-period, 2-sequence, crossover design with a washout period of 1 week. Under fasting conditions, 24 healthy Egyptian adult male volunteers were randomly allocated to receive a single dose of either test or reference product. Blood samples were collected at specified time intervals, and plasma was analyzed for loxoprofen concentrations using a validated high-performance liquid chromatography assay method. The pharmacokinetic parameters Cmax , AUC0-t , AUC0-∞ , tmax , and t1/2 were determined from plasma concentration-time profiles. The 90% confidence intervals for the ratio Cmax , AUC0-t , and AUCt-∞ of the test product over those of reference were within the acceptable range (0.8-1.25) for bioequivalence. On the basis of these results, the two-loxoprofen formulations are considered bioequivalent. © The Author(s) 2013.

  17. Separation of non-stationary multi-source sound field based on the interpolated time-domain equivalent source method

    NASA Astrophysics Data System (ADS)

    Bi, Chuan-Xing; Geng, Lin; Zhang, Xiao-Zheng

    2016-05-01

    In the sound field with multiple non-stationary sources, the measured pressure is the sum of the pressures generated by all sources, and thus cannot be used directly for studying the vibration and sound radiation characteristics of every source alone. This paper proposes a separation model based on the interpolated time-domain equivalent source method (ITDESM) to separate the pressure field belonging to every source from the non-stationary multi-source sound field. In the proposed method, ITDESM is first extended to establish the relationship between the mixed time-dependent pressure and all the equivalent sources distributed on every source with known location and geometry information, and all the equivalent source strengths at each time step are solved by an iterative solving process; then, the corresponding equivalent source strengths of one interested source are used to calculate the pressure field generated by that source alone. Numerical simulation of two baffled circular pistons demonstrates that the proposed method can be effective in separating the non-stationary pressure generated by every source alone in both time and space domains. An experiment with two speakers in a semi-anechoic chamber further evidences the effectiveness of the proposed method.

  18. 40 CFR 53.52 - Leak check test.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM 2.5 or PM 10-2.5 § 53.52... to include the facility, including components, instruments, operator controls, a written procedure...

  19. An equivalent viscoelastic model for rock mass with parallel joints

    NASA Astrophysics Data System (ADS)

    Li, Jianchun; Ma, Guowei; Zhao, Jian

    2010-03-01

    An equivalent viscoelastic medium model is proposed for rock mass with parallel joints. A concept of "virtual wave source (VWS)" is proposed to take into account the wave reflections between the joints. The equivalent model can be effectively applied to analyze longitudinal wave propagation through discontinuous media with parallel joints. Parameters in the equivalent viscoelastic model are derived analytically based on longitudinal wave propagation across a single rock joint. The proposed model is then verified by applying identical incident waves to the discontinuous and equivalent viscoelastic media at one end to compare the output waves at the other end. When the wavelength of the incident wave is sufficiently long compared to the joint spacing, the effect of the VWS on wave propagation in rock mass is prominent. The results from the equivalent viscoelastic medium model are very similar to those determined from the displacement discontinuity method. Frequency dependence and joint spacing effect on the equivalent viscoelastic model and the VWS method are discussed.

  20. Sound source identification and sound radiation modeling in a moving medium using the time-domain equivalent source method.

    PubMed

    Zhang, Xiao-Zheng; Bi, Chuan-Xing; Zhang, Yong-Bin; Xu, Liang

    2015-05-01

    Planar near-field acoustic holography has been successfully extended to reconstruct the sound field in a moving medium, however, the reconstructed field still contains the convection effect that might lead to the wrong identification of sound sources. In order to accurately identify sound sources in a moving medium, a time-domain equivalent source method is developed. In the method, the real source is replaced by a series of time-domain equivalent sources whose strengths are solved iteratively by utilizing the measured pressure and the known convective time-domain Green's function, and time averaging is used to reduce the instability in the iterative solving process. Since these solved equivalent source strengths are independent of the convection effect, they can be used not only to identify sound sources but also to model sound radiations in both moving and static media. Numerical simulations are performed to investigate the influence of noise on the solved equivalent source strengths and the effect of time averaging on reducing the instability, and to demonstrate the advantages of the proposed method on the source identification and sound radiation modeling.

  1. Quantitative imaging biomarkers: a review of statistical methods for technical performance assessment.

    PubMed

    Raunig, David L; McShane, Lisa M; Pennello, Gene; Gatsonis, Constantine; Carson, Paul L; Voyvodic, James T; Wahl, Richard L; Kurland, Brenda F; Schwarz, Adam J; Gönen, Mithat; Zahlmann, Gudrun; Kondratovich, Marina V; O'Donnell, Kevin; Petrick, Nicholas; Cole, Patricia E; Garra, Brian; Sullivan, Daniel C

    2015-02-01

    Technological developments and greater rigor in the quantitative measurement of biological features in medical images have given rise to an increased interest in using quantitative imaging biomarkers to measure changes in these features. Critical to the performance of a quantitative imaging biomarker in preclinical or clinical settings are three primary metrology areas of interest: measurement linearity and bias, repeatability, and the ability to consistently reproduce equivalent results when conditions change, as would be expected in any clinical trial. Unfortunately, performance studies to date differ greatly in designs, analysis method, and metrics used to assess a quantitative imaging biomarker for clinical use. It is therefore difficult or not possible to integrate results from different studies or to use reported results to design studies. The Radiological Society of North America and the Quantitative Imaging Biomarker Alliance with technical, radiological, and statistical experts developed a set of technical performance analysis methods, metrics, and study designs that provide terminology, metrics, and methods consistent with widely accepted metrological standards. This document provides a consistent framework for the conduct and evaluation of quantitative imaging biomarker performance studies so that results from multiple studies can be compared, contrasted, or combined. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  2. Simplified stereo-optical ultrasound plane calibration

    NASA Astrophysics Data System (ADS)

    Hoßbach, Martin; Noll, Matthias; Wesarg, Stefan

    2013-03-01

    Image guided therapy is a natural concept and commonly used in medicine. In anesthesia, a common task is the injection of an anesthetic close to a nerve under freehand ultrasound guidance. Several guidance systems exist using electromagnetic tracking of the ultrasound probe as well as the needle, providing the physician with a precise projection of the needle into the ultrasound image. This, however, requires additional expensive devices. We suggest using optical tracking with miniature cameras attached to a 2D ultrasound probe to achieve a higher acceptance among physicians. The purpose of this paper is to present an intuitive method to calibrate freehand ultrasound needle guidance systems employing a rigid stereo camera system. State of the art methods are based on a complex series of error prone coordinate system transformations which makes them susceptible to error accumulation. By reducing the amount of calibration steps to a single calibration procedure we provide a calibration method that is equivalent, yet not prone to error accumulation. It requires a linear calibration object and is validated on three datasets utilizing di erent calibration objects: a 6mm metal bar and a 1:25mm biopsy needle were used for experiments. Compared to existing calibration methods for freehand ultrasound needle guidance systems, we are able to achieve higher accuracy results while additionally reducing the overall calibration complexity. Ke

  3. Kalman-variant estimators for state of charge in lithium-sulfur batteries

    NASA Astrophysics Data System (ADS)

    Propp, Karsten; Auger, Daniel J.; Fotouhi, Abbas; Longo, Stefano; Knap, Vaclav

    2017-03-01

    Lithium-sulfur batteries are now commercially available, offering high specific energy density, low production costs and high safety. However, there is no commercially-available battery management system for them, and there are no published methods for determining state of charge in situ. This paper describes a study to address this gap. The properties and behaviours of lithium-sulfur are briefly introduced, and the applicability of 'standard' lithium-ion state-of-charge estimation methods is explored. Open-circuit voltage methods and 'Coulomb counting' are found to have a poor fit for lithium-sulfur, and model-based methods, particularly recursive Bayesian filters, are identified as showing strong promise. Three recursive Bayesian filters are implemented: an extended Kalman filter (EKF), an unscented Kalman filter (UKF) and a particle filter (PF). These estimators are tested through practical experimentation, considering both a pulse-discharge test and a test based on the New European Driving Cycle (NEDC). Experimentation is carried out at a constant temperature, mirroring the environment expected in the authors' target automotive application. It is shown that the estimators, which are based on a relatively simple equivalent-circuit-network model, can deliver useful results. If the three estimators implemented, the unscented Kalman filter gives the most robust and accurate performance, with an acceptable computational effort.

  4. Multilevel Optimization Framework for Hierarchical Stiffened Shells Accelerated by Adaptive Equivalent Strategy

    NASA Astrophysics Data System (ADS)

    Wang, Bo; Tian, Kuo; Zhao, Haixin; Hao, Peng; Zhu, Tianyu; Zhang, Ke; Ma, Yunlong

    2017-06-01

    In order to improve the post-buckling optimization efficiency of hierarchical stiffened shells, a multilevel optimization framework accelerated by adaptive equivalent strategy is presented in this paper. Firstly, the Numerical-based Smeared Stiffener Method (NSSM) for hierarchical stiffened shells is derived by means of the numerical implementation of asymptotic homogenization (NIAH) method. Based on the NSSM, a reasonable adaptive equivalent strategy for hierarchical stiffened shells is developed from the concept of hierarchy reduction. Its core idea is to self-adaptively decide which hierarchy of the structure should be equivalent according to the critical buckling mode rapidly predicted by NSSM. Compared with the detailed model, the high prediction accuracy and efficiency of the proposed model is highlighted. On the basis of this adaptive equivalent model, a multilevel optimization framework is then established by decomposing the complex entire optimization process into major-stiffener-level and minor-stiffener-level sub-optimizations, during which Fixed Point Iteration (FPI) is employed to accelerate convergence. Finally, the illustrative examples of the multilevel framework is carried out to demonstrate its efficiency and effectiveness to search for the global optimum result by contrast with the single-level optimization method. Remarkably, the high efficiency and flexibility of the adaptive equivalent strategy is indicated by compared with the single equivalent strategy.

  5. 76 FR 19769 - Agency Information Collection Activities; Proposed Collection; Comment Request; Application for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ... Activities; Proposed Collection; Comment Request; Application for Reference and Equivalent Method... ID No. EPA-HQ- ORD-2005-0530, by one of the following methods: http://www.regulations.gov : Follow... instruments, or any other applicant for a reference or an equivalent method determination. Title: Application...

  6. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... sample collection filter) differs significantly from that specified for reference method samplers as... transport is the percentage of a laboratory challenge aerosol which penetrates to the active sample filter of the candidate equivalent method sampler. (2) The active sample filter is the exclusive filter...

  7. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... sample collection filter) differs significantly from that specified for reference method samplers as... transport is the percentage of a laboratory challenge aerosol which penetrates to the active sample filter of the candidate equivalent method sampler. (2) The active sample filter is the exclusive filter...

  8. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... sample collection filter) differs significantly from that specified for reference method samplers as... transport is the percentage of a laboratory challenge aerosol which penetrates to the active sample filter of the candidate equivalent method sampler. (2) The active sample filter is the exclusive filter...

  9. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... sample collection filter) differs significantly from that specified for reference method samplers as... transport is the percentage of a laboratory challenge aerosol which penetrates to the active sample filter of the candidate equivalent method sampler. (2) The active sample filter is the exclusive filter...

  10. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... sample collection filter) differs significantly from that specified for reference method samplers as... transport is the percentage of a laboratory challenge aerosol which penetrates to the active sample filter of the candidate equivalent method sampler. (2) The active sample filter is the exclusive filter...

  11. 40 CFR 53.52 - Leak check test.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM2.5 or PM10â2.5 § 53.52... to include the facility, including components, instruments, operator controls, a written procedure...

  12. 40 CFR 53.52 - Leak check test.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM2.5 or PM10â2.5 § 53.52... to include the facility, including components, instruments, operator controls, a written procedure...

  13. 40 CFR 53.52 - Leak check test.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM2.5 or PM10â2.5 § 53.52... to include the facility, including components, instruments, operator controls, a written procedure...

  14. Online adaptation and verification of VMAT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Crijns, Wouter, E-mail: wouter.crijns@uzleuven.be; Defraene, Gilles; Depuydt, Tom

    2015-07-15

    Purpose: This work presents a method for fast volumetric modulated arc therapy (VMAT) adaptation in response to interfraction anatomical variations. Additionally, plan parameters extracted from the adapted plans are used to verify the quality of these plans. The methods were tested as a prostate class solution and compared to replanning and to their current clinical practice. Methods: The proposed VMAT adaptation is an extension of their previous intensity modulated radiotherapy (IMRT) adaptation. It follows a direct (forward) planning approach: the multileaf collimator (MLC) apertures are corrected in the beam’s eye view (BEV) and the monitor units (MUs) are corrected usingmore » point dose calculations. All MLC and MU corrections are driven by the positions of four fiducial points only, without need for a full contour set. Quality assurance (QA) of the adapted plans is performed using plan parameters that can be calculated online and that have a relation to the delivered dose or the plan quality. Five potential parameters are studied for this purpose: the number of MU, the equivalent field size (EqFS), the modulation complexity score (MCS), and the components of the MCS: the aperture area variability (AAV) and the leaf sequence variability (LSV). The full adaptation and its separate steps were evaluated in simulation experiments involving a prostate phantom subjected to various interfraction transformations. The efficacy of the current VMAT adaptation was scored by target mean dose (CTV{sub mean}), conformity (CI{sub 95%}), tumor control probability (TCP), and normal tissue complication probability (NTCP). The impact of the adaptation on the plan parameters (QA) was assessed by comparison with prediction intervals (PI) derived from a statistical model of the typical variation of these parameters in a population of VMAT prostate plans (n = 63). These prediction intervals are the adaptation equivalent of the tolerance tables for couch shifts in the current clinical practice. Results: The proposed adaptation of a two-arc VMAT plan resulted in the intended CTV{sub mean} (Δ ≤ 3%) and TCP (ΔTCP ≤ 0.001). Moreover, the method assures the intended CI{sub 95%} (Δ ≤ 11%) resulting in lowered rectal NTCP for all cases. Compared to replanning, their adaptation is faster (13 s vs 10 min) and more intuitive. Compared to the current clinical practice, it has a better protection of the healthy tissue. Compared to IMRT, VMAT is more robust to anatomical variations, but it is also less sensitive to the different correction steps. The observed variations of the plan parameters in their database included a linear dependence on the date of treatment planning and on the target radius. The MCS is not retained as QA metric due to a contrasting behavior of its components (LSV and AAV). If three out of four plan parameters (MU, EqFS, AAV, and LSV) need to lie inside a 50% prediction interval (3/4—50%PI), all adapted plans will be accepted. In contrast, all replanned plans do not meet this loose criterion, mainly because they have no connection to the initially optimized and verified plan. Conclusions: A direct (forward) VMAT adaptation performs equally well as (inverse) replanning but is faster and can be extended to real-time adaptation. The prediction intervals for the machine parameters are equivalent to the tolerance tables for couch shifts in the current clinical practice. A 3/4—50%PI QA criterion accepts all the adapted plans but rejects all the replanned plans.« less

  15. SUPPORT FOR REFERENCE AND EQUIVALENCY PROGRAM

    EPA Science Inventory

    Federal Reference Methods (FRMs) and Federal Equivalent Methods (FEMs) form the backbone of the EPA's national monitoring strategy. They are the measurement methodologies that define attainment of a National Ambient Air Quality Standard (NAAQS). As knowledge and technology adva...

  16. The equivalent magnetizing method applied to the design of gradient coils for MRI.

    PubMed

    Lopez, Hector Sanchez; Liu, Feng; Crozier, Stuart

    2008-01-01

    This paper presents a new method for the design of gradient coils for Magnetic Resonance Imaging systems. The method is based on the equivalence between a magnetized volume surrounded by a conducting surface and its equivalent representation in surface current/charge density. We demonstrate that the curl of the vertical magnetization induces a surface current density whose stream line defines the coil current pattern. This method can be applied for coils wounds on arbitrary surface shapes. A single layer unshielded transverse gradient coil is designed and compared, with the designs obtained using two conventional methods. Through the presented example we demonstrate that the generated unconventional current patterns obtained using the magnetizing current method produces a superior gradient coil performance than coils designed by applying conventional methods.

  17. Parental acceptability of contraceptive methods offered to their teen during a confidential health care visit.

    PubMed

    Hartman, Lauren B; Shafer, Mary-Ann; Pollack, Lance M; Wibbelsman, Charles; Chang, Fay; Tebb, Kathleen P

    2013-02-01

    To examine parental acceptability of contraceptive methods offered confidentially to their adolescent daughter. A random sample of 261 parents/guardians with a daughter aged 12-17 years completed a telephone survey examining the relationship between parental acceptability of seven contraceptive methods and adolescents' likelihood to have sex, parenting beliefs, parents' sexual health as teens, sexually transmitted infection knowledge, and demographic factors. Acceptability was highest for oral contraceptive pills (59%) and lowest for intrauterine device (18%). Parental acceptance of teens' autonomy was significantly associated with increased acceptability of all methods. Parental knowledge of sexually transmitted infections was poor, and 51% found it acceptable for clinicians to provide their sexually active teen with condoms. Parents were more accepting of oral contraceptive pills and condoms compared with intrauterine devices and implants. Parental recognition of their teen's autonomy was associated with greater parental acceptability of clinicians providing their adolescent with contraceptives (regardless of the specific type of method being offered). Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  18. Antipsychotic dose equivalents and dose-years: a standardized method for comparing exposure to different drugs.

    PubMed

    Andreasen, Nancy C; Pressler, Marcus; Nopoulos, Peg; Miller, Del; Ho, Beng-Choon

    2010-02-01

    A standardized quantitative method for comparing dosages of different drugs is a useful tool for designing clinical trials and for examining the effects of long-term medication side effects such as tardive dyskinesia. Such a method requires establishing dose equivalents. An expert consensus group has published charts of equivalent doses for various antipsychotic medications for first- and second-generation medications. These charts were used in this study. Regression was used to compare each drug in the experts' charts to chlorpromazine and haloperidol and to create formulas for each relationship. The formulas were solved for chlorpromazine 100 mg and haloperidol 2 mg to derive new chlorpromazine and haloperidol equivalents. The formulas were incorporated into our definition of dose-years such that 100 mg/day of chlorpromazine equivalent or 2 mg/day of haloperidol equivalent taken for 1 year is equal to one dose-year. All comparisons to chlorpromazine and haloperidol were highly linear with R(2) values greater than .9. A power transformation further improved linearity. By deriving a unique formula that converts doses to chlorpromazine or haloperidol equivalents, we can compare otherwise dissimilar drugs. These equivalents can be multiplied by the time an individual has been on a given dose to derive a cumulative value measured in dose-years in the form of (chlorpromazine equivalent in mg) x (time on dose measured in years). After each dose has been converted to dose-years, the results can be summed to provide a cumulative quantitative measure of lifetime exposure. Copyright 2010 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

  19. Equivalent Circuit Parameter Calculation of Interior Permanent Magnet Motor Involving Iron Loss Resistance Using Finite Element Method

    NASA Astrophysics Data System (ADS)

    Yamazaki, Katsumi

    In this paper, we propose a method to calculate the equivalent circuit parameters of interior permanent magnet motors including iron loss resistance using the finite element method. First, the finite element analysis considering harmonics and magnetic saturation is carried out to obtain time variations of magnetic fields in the stator and the rotor core. Second, the iron losses of the stator and the rotor are calculated from the results of the finite element analysis with the considerations of harmonic eddy current losses and the minor hysteresis losses of the core. As a result, we obtain the equivalent circuit parameters i.e. the d-q axis inductance and the iron loss resistance as functions of operating condition of the motor. The proposed method is applied to an interior permanent magnet motor to calculate the characteristics based on the equivalent circuit obtained by the proposed method. The calculated results are compared with the experimental results to verify the accuracy.

  20. Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation

    NASA Technical Reports Server (NTRS)

    Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

    2005-01-01

    A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including distributed software systems, sensor networks, robot operation, complex scripts for spacecraft integration and testing, and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.

  1. Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation

    NASA Technical Reports Server (NTRS)

    Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

    2005-01-01

    A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including distributed software systems, sensor networks, robot operation, complex scripts for spacecraft integration and testing, and autonomous systems. Currently available tools and methods that start with a formal model of a: system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The "gap" that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the ciasses of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.

  2. Measurement of radiation damage on an epoxy-based optical glue

    NASA Astrophysics Data System (ADS)

    Huang, H. C.; Peng, K. C.; Sahu, S. K.; Ueno, K.; Chang, Y. H.; Wang, C. H.; Hou, W. S.

    1997-02-01

    We measured the radiation damage on an optical glue called Eccobond-24, which is a candidate for CsI and BGO crystal calorimeters of the BELLE detector of the KEK B-factory. Absorption spectrophotometry in the range 300-800 nm was used to monitor the radiation damage. The maximum equivalent dose was 1.64 Mrad. The glue shows effects of damage, but is acceptable for the radiation level in the above-mentioned experiment.

  3. Angle amplifying optics using plane and ellipsoidal reflectors

    DOEpatents

    Glass, Alexander J.

    1977-01-01

    An optical system for providing a wide angle input beam into ellipsoidal laser fusion target illumination systems. The optical system comprises one or more pairs of centrally apertured plane and ellipsoidal mirrors disposed to accept the light input from a conventional lens of modest focal length and thickness, to increase the angular divergence thereof to a value equivalent to that of fast lenses, and to direct the light into the ellipsoidal target illumination system.

  4. Prediction of the turbulent wake with second-order closure

    NASA Technical Reports Server (NTRS)

    Taulbee, D. B.; Lumley, J. L.

    1981-01-01

    A turbulence was envisioned whose energy containing scales would be Gaussian in the absence of inhomogeneity, gravity, etc. An equation was constructed for a function equivalent to the probability density, the second moment of which corresponded to the accepted modeled form of the Reynolds stress equation. The third moment equations obtained from this were simplified by the assumption of weak inhomogeneity. Calculations are presented with this model as well as interpretations of the results.

  5. Equivalent square formula for determining the surface dose of rectangular field from 6 MV therapeutic photon beam.

    PubMed

    Apipunyasopon, Lukkana; Srisatit, Somyot; Phaisangittisakul, Nakorn

    2013-09-06

    The purpose of the study was to investigate the use of the equivalent square formula for determining the surface dose from a rectangular photon beam. A 6 MV therapeutic photon beam delivered from a Varian Clinac 23EX medical linear accelerator was modeled using the EGS4nrc Monte Carlo simulation package. It was then used to calculate the dose in the build-up region from both square and rectangular fields. The field patterns were defined by various settings of the X- and Y-collimator jaw ranging from 5 to 20 cm. Dose measurements were performed using a thermoluminescence dosimeter and a Markus parallel-plate ionization chamber on the four square fields (5 × 5, 10 × 10, 15 × 15, and 20 × 20 cm2). The surface dose was acquired by extrapolating the build-up doses to the surface. An equivalent square for a rectangular field was determined using the area-to-perimeter formula, and the surface dose of the equivalent square was estimated using the square-field data. The surface dose of square field increased linearly from approximately 10% to 28% as the side of the square field increased from 5 to 20 cm. The influence of collimator exchange on the surface dose was found to be not significant. The difference in the percentage surface dose of the rectangular field compared to that of the relevant equivalent square was insignificant and can be clinically neglected. The use of the area-to-perimeter formula for an equivalent square field can provide a clinically acceptable surface dose estimation for a rectangular field from a 6 MV therapy photon beam.

  6. Qualitative methods to ensure acceptability of behavioral and social interventions to the target population

    PubMed Central

    Ayala, Guadalupe X.; Elder, John P.

    2013-01-01

    This paper introduces qualitative methods for assessing the acceptability of an intervention. Acceptability refers to determining how well an intervention will be received by the target population and the extent to which the new intervention or its components might meet the needs of the target population and organizational setting. In this paper, we focus on two common qualitative methods for conducting acceptability research and their advantages and disadvantages: focus groups and interviews. We provide examples from our own research and other studies to demonstrate the use of these methods for conducting acceptability research and how one might adapt this approach for oral health research. Finally, we present emerging methods for conducting acceptability research, including the use of community-based participatory research, as well as the utility of conducting acceptability research for assessing the appropriateness of measures in intervention research. PMID:21656958

  7. Comparison of Submental Blood Collection with the Retroorbital and Submandibular Methods in Mice (Mus musculus)

    PubMed Central

    Regan, Rainy D; Fenyk-Melody, Judy E; Tran, Sam M; Chen, Guang; Stocking, Kim L

    2016-01-01

    Nonterminal blood sample collection of sufficient volume and quality for research is complicated in mice due to their small size and anatomy. Large (>100 μL) nonterminal volumes of unhemolyzed or unclotted blood currently are typically collected from the retroorbital sinus or submandibular plexus. We developed a third method—submental blood collection—which is similar in execution to the submandibular method but with minor changes in animal restraint and collection location. Compared with other techniques, submental collection is easier to perform due to the direct visibility of the target vessels, which are located in a sparsely furred region. Compared with the submandibular method, the submental method did not differ regarding weight change and clotting score but significantly decreased hemolysis and increased the overall number of high-quality samples. The submental method was performed with smaller lancets for the majority of the bleeds, yet resulted in fewer repeat collection attempts, fewer insufficient samples, and less extraneous blood loss and was qualitatively less traumatic. Compared with the retroorbital technique, the submental method was similar regarding weight change but decreased hemolysis, clotting, and the number of overall high-quality samples; however the retroorbital method resulted in significantly fewer incidents of insufficient sample collection. Extraneous blood loss was roughly equivalent between the submental and retroorbital methods. We conclude that the submental method is an acceptable venipuncture technique for obtaining large, nonterminal volumes of blood from mice. PMID:27657712

  8. Advancing Research on Racial–Ethnic Health Disparities: Improving Measurement Equivalence in Studies with Diverse Samples

    PubMed Central

    Landrine, Hope; Corral, Irma

    2014-01-01

    To conduct meaningful, epidemiologic research on racial–ethnic health disparities, racial–ethnic samples must be rendered equivalent on other social status and contextual variables via statistical controls of those extraneous factors. The racial–ethnic groups must also be equally familiar with and have similar responses to the methods and measures used to collect health data, must have equal opportunity to participate in the research, and must be equally representative of their respective populations. In the absence of such measurement equivalence, studies of racial–ethnic health disparities are confounded by a plethora of unmeasured, uncontrolled correlates of race–ethnicity. Those correlates render the samples, methods, and measures incomparable across racial–ethnic groups, and diminish the ability to attribute health differences discovered to race–ethnicity vs. to its correlates. This paper reviews the non-equivalent yet normative samples, methodologies and measures used in epidemiologic studies of racial–ethnic health disparities, and provides concrete suggestions for improving sample, method, and scalar measurement equivalence. PMID:25566524

  9. Liking of health-functional foods containing lupin kernel fibre following repeated consumption in a dietary intervention setting.

    PubMed

    Hall, Ramon S; Baxter, Amynta L; Fryirs, Cathy; Johnson, Stuart K

    2010-10-01

    Liking of a particular food after repeated consumption may be reduced, limiting the effectiveness of health-functional foods requiring on-going consumption to deliver their benefits. This study examined the effect of repeated consumption of foods containing the novel ingredient, Australian sweet lupin (Lupinus angustifolius) kernel fibre (LKFibre) on sensory acceptability in the dietary intervention setting. In a single-blind randomised crossover 4-week intervention, participants consumed both control and equivalent LKFibre-containing products daily on separate interventions separated by a 4-week period on habitual diet. Seven products: muesli, bread, muffin, chocolate brownie, chocolate milk drink, pasta and instant mashed potato were assessed twice (days 4 and 18 of intervention), by 38 participants for appearance, texture, flavour and general acceptability using a structured graphic hedonic scale. Overall the results showed there was no reduction (P=0.594) in general acceptability of LKFibre foods after repeated consumption, suggesting potential for long-term consumption. The control food products were however generally preferred (P<0.001) over the LKFibre foods; the mean difference for general acceptability between being <6% (0.82cm) of the 15cm hedonic scale used, suggesting LKF addition did not severely affect product palatability.

  10. Determination of the Oswestry Disability Index score equivalent to a "satisfactory symptom state" in patients undergoing surgery for degenerative disorders of the lumbar spine-a Spine Tango registry-based study.

    PubMed

    van Hooff, Miranda L; Mannion, Anne F; Staub, Lukas P; Ostelo, Raymond W J G; Fairbank, Jeremy C T

    2016-10-01

    The achievement of a given change score on a valid outcome instrument is commonly used to indicate whether a clinically relevant change has occurred after spine surgery. However, the achievement of such a change score can be dependent on baseline values and does not necessarily indicate whether the patient is satisfied with the current state. The achievement of an absolute score equivalent to a patient acceptable symptom state (PASS) may be a more stringent measure to indicate treatment success. This study aimed to estimate the score on the Oswestry Disability Index (ODI, version 2.1a; 0-100) corresponding to a PASS in patients who had undergone surgery for degenerative disorders of the lumbar spine. This is a cross-sectional study of diagnostic accuracy using follow-up data from an international spine surgery registry. The sample includes 1,288 patients with degenerative lumbar spine disorders who had undergone elective spine surgery, registered in the EUROSPINE Spine Tango Spine Surgery Registry. The main outcome measure was the ODI (version 2.1a). Surgical data and data from the ODI and Core Outcome Measures Index (COMI) were included to determine the ODI threshold equivalent to PASS at 1 year (±1.5 months; n=780) and 2 years (±2 months; n=508) postoperatively. The symptom-specific well-being item of the COMI was used as the external criterion in the receiver operating characteristic (ROC) analysis to determine the ODI threshold equivalent to PASS. Separate sensitivity analyses were performed based on the different definitions of an "acceptable state" and for subgroups of patients. JF is a copyright holder of the ODI. The ODI threshold for PASS was 22, irrespective of the time of follow-up (area under the curve [AUC]: 0.89 [sensitivity {Se}: 78.3%, specificity {Sp}: 82.1%] and AUC: 0.91 [Se: 80.7%, Sp: 85.6] for the 1- and 2-year follow-ups, respectively). Sensitivity analyses showed that the absolute ODI-22 threshold for the two follow-up time-points were robust. A stricter definition of PASS resulted in lower ODI thresholds, varying from 16 (AUC=0.89; Se: 80.2%, Sp: 82.0%) to 18 (AUC=0.90; Se: 82.4%, Sp: 80.4%) depending on the time of follow-up. An ODI score ≤22 indicates the achievement of an acceptable symptom state and can hence be used as a criterion of treatment success alongside the commonly used change score measures. At the individual level, the threshold could be used to indicate whether or not a patient with a lumbar spine disorder is a "responder" after elective surgery. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. A formal and data-based comparison of measures of motor-equivalent covariation.

    PubMed

    Verrel, Julius

    2011-09-15

    Different analysis methods have been developed for assessing motor-equivalent organization of movement variability. In the uncontrolled manifold (UCM) method, the structure of variability is analyzed by comparing goal-equivalent and non-goal-equivalent variability components at the level of elemental variables (e.g., joint angles). In contrast, in the covariation by randomization (CR) approach, motor-equivalent organization is assessed by comparing variability at the task level between empirical and decorrelated surrogate data. UCM effects can be due to both covariation among elemental variables and selective channeling of variability to elemental variables with low task sensitivity ("individual variation"), suggesting a link between the UCM and CR method. However, the precise relationship between the notion of covariation in the two approaches has not been analyzed in detail yet. Analysis of empirical and simulated data from a study on manual pointing shows that in general the two approaches are not equivalent, but the respective covariation measures are highly correlated (ρ > 0.7) for two proposed definitions of covariation in the UCM context. For one-dimensional task spaces, a formal comparison is possible and in fact the two notions of covariation are equivalent. In situations in which individual variation does not contribute to UCM effects, for which necessary and sufficient conditions are derived, this entails the equivalence of the UCM and CR analysis. Implications for the interpretation of UCM effects are discussed. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. A simple calculation method for determination of equivalent square field.

    PubMed

    Shafiei, Seyed Ali; Hasanzadeh, Hadi; Shafiei, Seyed Ahmad

    2012-04-01

    Determination of the equivalent square fields for rectangular and shielded fields is of great importance in radiotherapy centers and treatment planning software. This is accomplished using standard tables and empirical formulas. The goal of this paper is to present a formula based on analysis of scatter reduction due to inverse square law to obtain equivalent field. Tables are published by different agencies such as ICRU (International Commission on Radiation Units and measurements), which are based on experimental data; but there exist mathematical formulas that yield the equivalent square field of an irregular rectangular field which are used extensively in computation techniques for dose determination. These processes lead to some complicated and time-consuming formulas for which the current study was designed. In this work, considering the portion of scattered radiation in absorbed dose at a point of measurement, a numerical formula was obtained based on which a simple formula was developed to calculate equivalent square field. Using polar coordinate and inverse square law will lead to a simple formula for calculation of equivalent field. The presented method is an analytical approach based on which one can estimate the equivalent square field of a rectangular field and may be used for a shielded field or an off-axis point. Besides, one can calculate equivalent field of rectangular field with the concept of decreased scatter radiation with inverse square law with a good approximation. This method may be useful in computing Percentage Depth Dose and Tissue-Phantom Ratio which are extensively used in treatment planning.

  13. The Equivalence of Two Methods of Parameter Estimation for the Rasch Model.

    ERIC Educational Resources Information Center

    Blackwood, Larry G.; Bradley, Edwin L.

    1989-01-01

    Two methods of estimating parameters in the Rasch model are compared. The equivalence of likelihood estimations from the model of G. J. Mellenbergh and P. Vijn (1981) and from usual unconditional maximum likelihood (UML) estimation is demonstrated. Mellenbergh and Vijn's model is a convenient method of calculating UML estimates. (SLD)

  14. 76 FR 44583 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-26

    ... confidential business information may be necessary to make a reference or equivalent method determination. The... Equivalent Method Determination (Renewal) AGENCY: Environmental Protection Agency (EPA). [[Page 44584... http://www.regulations.gov (our preferred method), by e-mail to [email protected] , or by mail to: EPA...

  15. Equivalent modulus method for finite element simulation of the sound absorption of anechoic coating backed with orthogonally rib-stiffened plate

    NASA Astrophysics Data System (ADS)

    Jin, Zhongkun; Yin, Yao; Liu, Bilong

    2016-03-01

    The finite element method is often used to investigate the sound absorption of anechoic coating backed with orthogonally rib-stiffened plate. Since the anechoic coating contains cavities, the number of grid nodes of a periodic unit cell is usually large. An equivalent modulus method is proposed to reduce the large amount of nodes by calculating an equivalent homogeneous layer. Applications of this method in several models show that the method can well predict the sound absorption coefficient of such structure in a wide frequency range. Based on the simulation results, the sound absorption performance of such structure and the influences of different backings on the first absorption peak are also discussed.

  16. The Strengths and Difficulties Questionnaire (SDQ): Factor Structure and Gender Equivalence in Norwegian Adolescents

    PubMed Central

    Hysing, Mari; Skogen, Jens Christoffer; Breivik, Kyrre

    2016-01-01

    Although frequently used with older adolescents, few studies of the factor structure, internal consistency and gender equivalence of the SDQ exists for this age group, with inconsistent findings. In the present study, confirmatory factor analysis (CFA) was used to evaluate the five-factor structure of the SDQ in a population sample of 10,254 16–18 year-olds from the youth@hordaland study. Measurement invariance across gender was assessed using multigroup CFA. A modestly modified five-factor solution fitted the data acceptably, accounting for one cross loading and some local dependencies. Importantly, partial measurement non-invariance was identified, with differential item functioning in eight items, and higher correlations between emotional and conduct problems for boys compared to girls. Implications for use clinically and in research are discussed. PMID:27138259

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, C.; Burnett, M.; Goodman, C.

    A survey of currency flaw severity was carried out using 300 banknotes and 37 judges. Each judge assigned each note to one of five flaw severity categories. These categories correspond to severity grades of 1 to 5 with 1 equivalent to ''always accepted'' and 5 ''never accepted.'' An average flaw severity grade for each note was obtained by taking the mean of the severity grades assigned to that note by the 37 judges. Thus, each note has a single numerical real-number flaw grade between 1 and 5. Mathematical modeling of the currency flaw survey results is continuing with some verymore » promising initial results. Our present model handles common excess ink and missing ink flaw types quite well. We plan to extend the model to ink level, mash, setoff and blanket impression flaw types.« less

  18. Molecular Design of Squalene/Squalane Countertypes via the Controlled Oligomerization of Isoprene and Evaluation of Vaccine Adjuvant Applications.

    PubMed

    Adlington, Kevin; El Harfi, Jaouad; Li, Jianing; Carmichael, Kim; Guderian, Jeffrey A; Fox, Christopher B; Irvine, Derek J

    2016-01-11

    The potential to replace shark-derived squalene in vaccine adjuvant applications with synthetic squalene/poly(isoprene) oligomers, synthesized by the controlled oligomerization of isoprene is demonstrated. Following on from our previous work regarding the synthesis of poly(isoprene) oligomers, we demonstrate the ability to tune the molecular weight of the synthetic poly(isoprene) material beyond that of natural squalene, while retaining a final backbone structure that contained a minimum of 75% of 1,4 addition product and an acceptable polydispersity. The synthesis was successfully scaled from the 2 g to the 40 g scale both in the bulk (i.e., solvent free) and with the aid of additional solvent by utilizing catalytic chain transfer polymerization (CCTP) as the control method, such that the target molecular weight, acceptable dispersity levels, and the desired level of 1,4 addition in the backbone structure and an acceptable yield (∼60%) are achieved. Moreover, the stability and in vitro bioactivity of nanoemulsion adjuvant formulations manufactured with the synthetic poly(isoprene) material are evaluated in comparison to emulsions made with shark-derived squalene. Emulsions containing the synthetic poly(isoprene) achieved smaller particle size and equivalent or enhanced bioactivity (stimulation of cytokine production in human whole blood) compared to corresponding shark squalene emulsions. However, as opposed to the shark squalene-based emulsions, the poly(isoprene) emulsions demonstrated reduced long-term size stability and induced hemolysis at high concentrations. Finally, we demonstrate that the synthetic oligomeric poly(isoprene) material could successfully be hydrogenated such that >95% of the double bonds were successfully removed to give a representative poly(isoprene)-derived squalane mimic.

  19. On the wavelet optimized finite difference method

    NASA Technical Reports Server (NTRS)

    Jameson, Leland

    1994-01-01

    When one considers the effect in the physical space, Daubechies-based wavelet methods are equivalent to finite difference methods with grid refinement in regions of the domain where small scale structure exists. Adding a wavelet basis function at a given scale and location where one has a correspondingly large wavelet coefficient is, essentially, equivalent to adding a grid point, or two, at the same location and at a grid density which corresponds to the wavelet scale. This paper introduces a wavelet optimized finite difference method which is equivalent to a wavelet method in its multiresolution approach but which does not suffer from difficulties with nonlinear terms and boundary conditions, since all calculations are done in the physical space. With this method one can obtain an arbitrarily good approximation to a conservative difference method for solving nonlinear conservation laws.

  20. A randomized matched-pairs study of feasibility, acceptability, and effectiveness of systems consultation: a novel implementation strategy for adopting clinical guidelines for Opioid prescribing in primary care.

    PubMed

    Quanbeck, Andrew; Brown, Randall T; Zgierska, Aleksandra E; Jacobson, Nora; Robinson, James M; Johnson, Roberta A; Deyo, Brienna M; Madden, Lynn; Tuan, Wen-Jan; Alagoz, Esra

    2018-01-25

    This paper reports on the feasibility, acceptability, and effectiveness of an innovative implementation strategy named "systems consultation" aimed at improving adherence to clinical guidelines for opioid prescribing in primary care. While clinical guidelines for opioid prescribing have been developed, they have not been widely implemented, even as opioid abuse reaches epidemic levels. We tested a blended implementation strategy consisting of several discrete implementation strategies, including audit and feedback, academic detailing, and external facilitation. The study compares four intervention clinics to four control clinics in a randomized matched-pairs design. Each systems consultant aided clinics on implementing the guidelines during a 6-month intervention consisting of monthly site visits and teleconferences/videoconferences. The mixed-methods evaluation employs the RE-AIM (Reach, Effectiveness, Adoption, Implementation, Maintenance) framework. Quantitative outcomes are compared using time series analysis. Qualitative methods included focus groups, structured interviews, and ethnographic field techniques. Seven clinics were randomly approached to recruit four intervention clinics. Each clinic designated a project team consisting of six to eight staff members, each with at least one prescriber. Attendance at intervention meetings was 83%. More than 80% of staff respondents agreed or strongly agreed with the statements: "I am more familiar with guidelines for safe opioid prescribing" and "My clinic's workflow for opioid prescribing is easier." At 6 months, statistically significant improvements were noted in intervention clinics in the percentage of patients with mental health screens, treatment agreements, urine drug tests, and opioid-benzodiazepine co-prescribing. At 12 months, morphine-equivalent daily dose was significantly reduced in intervention clinics compared to controls. The cost to deliver the strategy was $7345 per clinic. Adaptations were required to make the strategy more acceptable for primary care. Qualitatively, intervention clinics reported that chronic pain was now treated using approaches similar to those employed for other chronic conditions, such as hypertension and diabetes. The systems consultation implementation strategy demonstrated feasibility, acceptability, and effectiveness in a study involving eight primary care clinics. This multi-disciplinary strategy holds potential to mitigate the prevalence of opioid addiction and ultimately may help to improve implementation of clinical guidelines across healthcare. ClinicalTrials.gov (NCT02433496). https://clinicaltrials.gov/ct2/show/NCT02433496 Registered May 5, 2015.

  1. Double row equivalent for rotator cuff repair: A biomechanical analysis of a new technique.

    PubMed

    Robinson, Sean; Krigbaum, Henry; Kramer, Jon; Purviance, Connor; Parrish, Robin; Donahue, Joseph

    2018-06-01

    There are numerous configurations of double row fixation for rotator cuff tears however, there remains to be a consensus on the best method. In this study, we evaluated three different double-row configurations, including a new method. Our primary question is whether the new anchor and technique compares in biomechanical strength to standard double row techniques. Eighteen prepared fresh frozen bovine infraspinatus tendons were randomized to one of three groups including the New Double Row Equivalent, Arthrex Speedbridge and a transosseous equivalent using standard Stabilynx anchors. Biomechanical testing was performed on humeri sawbones and ultimate load, strain, yield strength, contact area, contact pressure, and a survival plots were evaluated. The new double row equivalent method demonstrated increased survival as well as ultimate strength at 415N compared to the remainder testing groups as well as equivalent contact area and pressure to standard double row techniques. This new anchor system and technique demonstrated higher survival rates and loads to failure than standard double row techniques. This data provides us with a new method of rotator cuff fixation which should be further evaluated in the clinical setting. Basic science biomechanical study.

  2. Why do we need male contraceptives?

    PubMed Central

    Cheng, C Yan; Mruk, Dolores D

    2013-01-01

    A recent article published in Bloomberg Businessweek1 has painted a grim picture of family planning practices in India by coercing women into sterilization. In the village of Sonhoula, 33 women, many of them poor, were forced into sterilization because each woman received either $10 or a modest increase in welfare benefits from local officials. These women accepted the offer out of desperation without receiving counseling on alternative birth control methods (Fig. 1). What is more striking is that the $10 accepted by these women is equivalent to 1 wk wages for a poor family, sufficient to feed at least three children. In the clinic, a medical assistant pricked each woman’s finger to test for anemia using the same needle. A surgeon then cut and tied each woman’s fallopian tubes with a rusted scalpel on a makeshift operating table (elevated from the floor with bricks and covered with a blood-stained sheet) in a 3 min operation. The scalpel was then washed with warm water and re-used for another patient. Women were then laid shoulder-to-shoulder on the floor in a separate room for recovery, with nurses walking around and offering painkillers. When the anesthetic ran out, the surgeon substituted a weaker drug, but since these women were not completely unconscious during the procedure, this medical practice is dangerous.  PMID:24381804

  3. Reference and Equivalent Methods Used to Measure National Ambient Air Quality Standards (NAAQS) Criteria Air Pollutants - Volume I

    EPA Science Inventory

    There are a number of Federal Reference Method (FRM) and Federal Equivalent Method (FEM) systems used to monitor the six criteria air pollutants (Lead [Pb], Carbon Monoxide [CO], Sulfur Dioxide [SO2], Nitrogen Dioxide [NO2], Ozone [O3], Particulate Matter [PM]) to determine if an...

  4. Comparisons of Internet-Based and Face-to-Face Learning Systems Based on "Equivalency of Experiences" According to Students' Academic Achievements and Satisfactions

    ERIC Educational Resources Information Center

    Karatas, Sercin; Simsek, Nurettin

    2009-01-01

    The purpose of this study is to determine whether "equivalent learning experiences" ensure equivalency, in the Internet-based and face-to-face interaction methods on learning results and student satisfaction. In the experimental process of this study, the effect of the Internet-based and face-to-face learning on the equivalency in…

  5. Dose Equivalents for Second-Generation Antipsychotic Drugs: The Classical Mean Dose Method

    PubMed Central

    Leucht, Stefan; Samara, Myrto; Heres, Stephan; Patel, Maxine X.; Furukawa, Toshi; Cipriani, Andrea; Geddes, John; Davis, John M.

    2015-01-01

    Background: The concept of dose equivalence is important for many purposes. The classical approach published by Davis in 1974 subsequently dominated textbooks for several decades. It was based on the assumption that the mean doses found in flexible-dose trials reflect the average optimum dose which can be used for the calculation of dose equivalence. We are the first to apply the method to second-generation antipsychotics. Methods: We searched for randomized, double-blind, flexible-dose trials in acutely ill patients with schizophrenia that examined 13 oral second-generation antipsychotics, haloperidol, and chlorpromazine (last search June 2014). We calculated the mean doses of each drug weighted by sample size and divided them by the weighted mean olanzapine dose to obtain olanzapine equivalents. Results: We included 75 studies with 16 555 participants. The doses equivalent to 1 mg/d olanzapine were: amisulpride 38.3 mg/d, aripiprazole 1.4 mg/d, asenapine 0.9 mg/d, chlorpromazine 38.9 mg/d, clozapine 30.6 mg/d, haloperidol 0.7 mg/d, quetiapine 32.3mg/d, risperidone 0.4mg/d, sertindole 1.1 mg/d, ziprasidone 7.9 mg/d, zotepine 13.2 mg/d. For iloperidone, lurasidone, and paliperidone no data were available. Conclusions: The classical mean dose method is not reliant on the limited availability of fixed-dose data at the lower end of the effective dose range, which is the major limitation of “minimum effective dose methods” and “dose-response curve methods.” In contrast, the mean doses found by the current approach may have in part depended on the dose ranges chosen for the original trials. Ultimate conclusions on dose equivalence of antipsychotics will need to be based on a review of various methods. PMID:25841041

  6. Intra-laboratory validation of microplate methods for total phenolic content and antioxidant activity on polyphenolic extracts, and comparison with conventional spectrophotometric methods.

    PubMed

    Bobo-García, Gloria; Davidov-Pardo, Gabriel; Arroqui, Cristina; Vírseda, Paloma; Marín-Arroyo, María R; Navarro, Montserrat

    2015-01-01

    Total phenolic content (TPC) and antioxidant activity (AA) assays in microplates save resources and time, therefore they can be useful to overcome the fact that the conventional methods are time-consuming, labour intensive and use large amounts of reagents. An intra-laboratory validation of the Folin-Ciocalteu microplate method to measure TPC and the 2,2-diphenyl-1-picrylhydrazyl (DPPH) microplate method to measure AA was performed and compared with conventional spectrophotometric methods. To compare the TPC methods, the confidence intervals of a linear regression were used. In the range of 10-70 mg L(-1) of gallic acid equivalents (GAE), both methods were equivalent. To compare the AA methodologies, the F-test and t-test were used in a range from 220 to 320 µmol L(-1) of Trolox equivalents. Both methods had homogeneous variances, and the means were not significantively different. The limits of detection and quantification for the TPC microplate method were 0.74 and 2.24 mg L(-1) GAE and for the DPPH 12.07 and 36.58 µmol L(-1) of Trolox equivalents. The relative standard deviation of the repeatability and reproducibility for both microplate methods were ≤ 6.1%. The accuracy ranged from 88% to 100%. The microplate and the conventional methods are equals in a 95% confidence level. © 2014 Society of Chemical Industry.

  7. Extragalactic Fields Optimized for Adaptive Optics

    DTIC Science & Technology

    2011-03-01

    DAVID MONETIO Received 2010 luly 19; accepted 2010 December 30; published 2011 March 1 ABSTRACT. In this article we present the coordinates of 67 55’ x...Window, contains most of the patches we have identified. Our optimal field, centered at R.A.: 7h24m3s, decl.: - 1 °27󈧓", has an additional advantage of...equivalent observations undertaken in existing deep fields. Online material: color figures 1 . INTRODUCTION Our understanding of the high-redshift

  8. Access and Achievement: Building Educational and Career Pathways for Latinos in Advanced Technology. Report on a National Study of Latino Access to Postsecondary Education and Careers in Information Technology

    ERIC Educational Resources Information Center

    Tornatzky, Louis G.; Macias, Elsa E.; Jenkins, Davis; Solis, Carlos

    2006-01-01

    One of the generally accepted premises of current economic thinking is that a large and expanding proportion of growth is tied to what has come to be known as the "knowledge economy" or equivalently, the innovation sector. Despite recent U.S. Census Bureau data indicating that Latinos now constitute the largest minority group of the U.S.…

  9. Methodological Issues in Examining Measurement Equivalence in Patient Reported Outcomes Measures: Methods Overview to the Two-Part Series, “Measurement Equivalence of the Patient Reported Outcomes Measurement Information System® (PROMIS®) Short Forms”

    PubMed Central

    Teresi, Jeanne A.; Jones, Richard N.

    2017-01-01

    The purpose of this article is to introduce the methods used and challenges confronted by the authors of this two-part series of articles describing the results of analyses of measurement equivalence of the short form scales from the Patient Reported Outcomes Measurement Information System® (PROMIS®). Qualitative and quantitative approaches used to examine differential item functioning (DIF) are reviewed briefly. Qualitative methods focused on generation of DIF hypotheses. The basic quantitative approaches used all rely on a latent variable model, and examine parameters either derived directly from item response theory (IRT) or from structural equation models (SEM). A key methods focus of these articles is to describe state-of-the art approaches to examination of measurement equivalence in eight domains: physical health, pain, fatigue, sleep, depression, anxiety, cognition, and social function. These articles represent the first time that DIF has been examined systematically in the PROMIS short form measures, particularly among ethnically diverse groups. This is also the first set of analyses to examine the performance of PROMIS short forms in patients with cancer. Latent variable model state-of-the-art methods for examining measurement equivalence are introduced briefly in this paper to orient readers to the approaches adopted in this set of papers. Several methodological challenges underlying (DIF-free) anchor item selection and model assumption violations are presented as a backdrop for the articles in this two-part series on measurement equivalence of PROMIS measures. PMID:28983448

  10. Methodological Issues in Examining Measurement Equivalence in Patient Reported Outcomes Measures: Methods Overview to the Two-Part Series, "Measurement Equivalence of the Patient Reported Outcomes Measurement Information System® (PROMIS®) Short Forms".

    PubMed

    Teresi, Jeanne A; Jones, Richard N

    2016-01-01

    The purpose of this article is to introduce the methods used and challenges confronted by the authors of this two-part series of articles describing the results of analyses of measurement equivalence of the short form scales from the Patient Reported Outcomes Measurement Information System ® (PROMIS ® ). Qualitative and quantitative approaches used to examine differential item functioning (DIF) are reviewed briefly. Qualitative methods focused on generation of DIF hypotheses. The basic quantitative approaches used all rely on a latent variable model, and examine parameters either derived directly from item response theory (IRT) or from structural equation models (SEM). A key methods focus of these articles is to describe state-of-the art approaches to examination of measurement equivalence in eight domains: physical health, pain, fatigue, sleep, depression, anxiety, cognition, and social function. These articles represent the first time that DIF has been examined systematically in the PROMIS short form measures, particularly among ethnically diverse groups. This is also the first set of analyses to examine the performance of PROMIS short forms in patients with cancer. Latent variable model state-of-the-art methods for examining measurement equivalence are introduced briefly in this paper to orient readers to the approaches adopted in this set of papers. Several methodological challenges underlying (DIF-free) anchor item selection and model assumption violations are presented as a backdrop for the articles in this two-part series on measurement equivalence of PROMIS measures.

  11. The normal-equivalent: a patient-specific assessment of facial harmony.

    PubMed

    Claes, P; Walters, M; Gillett, D; Vandermeulen, D; Clement, J G; Suetens, P

    2013-09-01

    Evidence-based practice in oral and maxillofacial surgery would greatly benefit from an objective assessment of facial harmony or gestalt. Normal reference faces have previously been introduced, but they describe harmony in facial form as an average only and fail to report on harmonic variations found between non-dysmorphic faces. In this work, facial harmony, in all its complexity, is defined using a face-space, which describes all possible variations within a non-dysmorphic population; this was sampled here, based on 400 healthy subjects. Subsequently, dysmorphometrics, which involves the measurement of morphological abnormalities, is employed to construct the normal-equivalent within the given face-space of a presented dysmorphic face. The normal-equivalent can be seen as a synthetic identical but unaffected twin that is a patient-specific and population-based normal. It is used to extract objective scores of facial discordancy. This technique, along with a comparing approach, was used on healthy subjects to establish ranges of discordancy that are accepted to be normal, as well as on two patient examples before and after surgical intervention. The specificity of the presented normal-equivalent approach was confirmed by correctly attributing abnormality and providing regional depictions of the known dysmorphologies. Furthermore, it proved to be superior to the comparing approach. Copyright © 2013 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  12. 40 CFR 53.58 - Operational field precision and blank test.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent... samplers are also subject to a test for possible deposition of particulate matter on inactive filters...

  13. 40 CFR 53.58 - Operational field precision and blank test.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent... samplers are also subject to a test for possible deposition of particulate matter on inactive filters...

  14. 40 CFR 53.58 - Operational field precision and blank test.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent... samplers are also subject to a test for possible deposition of particulate matter on inactive filters...

  15. 40 CFR 53.58 - Operational field precision and blank test.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PROGRAMS (CONTINUED) AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent... samplers are also subject to a test for possible deposition of particulate matter on inactive filters...

  16. A simple calculation method for determination of equivalent square field

    PubMed Central

    Shafiei, Seyed Ali; Hasanzadeh, Hadi; Shafiei, Seyed Ahmad

    2012-01-01

    Determination of the equivalent square fields for rectangular and shielded fields is of great importance in radiotherapy centers and treatment planning software. This is accomplished using standard tables and empirical formulas. The goal of this paper is to present a formula based on analysis of scatter reduction due to inverse square law to obtain equivalent field. Tables are published by different agencies such as ICRU (International Commission on Radiation Units and measurements), which are based on experimental data; but there exist mathematical formulas that yield the equivalent square field of an irregular rectangular field which are used extensively in computation techniques for dose determination. These processes lead to some complicated and time-consuming formulas for which the current study was designed. In this work, considering the portion of scattered radiation in absorbed dose at a point of measurement, a numerical formula was obtained based on which a simple formula was developed to calculate equivalent square field. Using polar coordinate and inverse square law will lead to a simple formula for calculation of equivalent field. The presented method is an analytical approach based on which one can estimate the equivalent square field of a rectangular field and may be used for a shielded field or an off-axis point. Besides, one can calculate equivalent field of rectangular field with the concept of decreased scatter radiation with inverse square law with a good approximation. This method may be useful in computing Percentage Depth Dose and Tissue-Phantom Ratio which are extensively used in treatment planning. PMID:22557801

  17. Analysis and synthesis of bianisotropic metasurfaces by using analytical approach based on equivalent parameters

    NASA Astrophysics Data System (ADS)

    Danaeifar, Mohammad; Granpayeh, Nosrat

    2018-03-01

    An analytical method is presented to analyze and synthesize bianisotropic metasurfaces. The equivalent parameters of metasurfaces in terms of meta-atom properties and other specifications of metasurfaces are derived. These parameters are related to electric, magnetic, and electromagnetic/magnetoelectric dipole moments of the bianisotropic media, and they can simplify the analysis of complicated and multilayer structures. A metasurface of split ring resonators is studied as an example demonstrating the proposed method. The optical properties of the meta-atom are explored, and the calculated polarizabilities are applied to find the reflection coefficient and the equivalent parameters of the metasurface. Finally, a structure consisting of two metasurfaces of the split ring resonators is provided, and the proposed analytical method is applied to derive the reflection coefficient. The validity of this analytical approach is verified by full-wave simulations which demonstrate good accuracy of the equivalent parameter method. This method can be used in the analysis and synthesis of bianisotropic metasurfaces with different materials and in different frequency ranges by considering electric, magnetic, and electromagnetic/magnetoelectric dipole moments.

  18. Validation of Single and Pooled Manure Drag Swabs for the Detection of Salmonella Serovar Enteritidis in Commercial Poultry Houses.

    PubMed

    Kinde, Hailu; Goodluck, Helen A; Pitesky, Maurice; Friend, Tom D; Campbell, James A; Hill, Ashley E

    2015-12-01

    Single swabs (cultured individually) are currently used in the Food and Drug Administration (FDA) official method for sampling the environment of commercial laying hens for the detection of Salmonella enterica ssp. serovar Enteritidis (Salmonella Enteritidis). The FDA has also granted provisional acceptance of the National Poultry Improvement Plan's (NPIP) Salmonella isolation and identification methodology for samples taken from table-egg layer flock environments. The NPIP method, as with the FDA method, requires single-swab culturing for the environmental sampling of laying houses for Salmonella Enteritidis. The FDA culture protocol requires a multistep culture enrichment broth, and it is more labor intensive than the NPIP culture protocol, which requires a single enrichment broth. The main objective of this study was to compare the FDA single-swab culturing protocol with that of the NPIP culturing protocol but using a four-swab pool scheme. Single and multi-laboratory testing of replicate manure drag swab sets (n  =  525 and 672, respectively) collected from a Salmonella Enteritidis-free commercial poultry flock was performed by artificially contaminating swabs with either Salmonella Enteritidis phage type 4, 8, or 13a at one of two inoculation levels: low, x¯  = 2.5 CFU (range 2.5-2.7), or medium, x¯  = 10.0 CFU (range 7.5-12). For each replicate, a single swab (inoculated), sets of two swabs (one inoculated and one uninoculated), and sets of four swabs (one inoculated and three uninoculated), testing was conducted using the FDA or NPIP culture method. For swabs inoculated with phage type 8, the NPIP method was more efficient (P < 0.05) for all swab sets at both inoculation levels than the reference method. The single swabs in the NPIP method were significantly (P < 0.05) better than four-pool swabs in detecting Salmonella Enteritidis at the lower inoculation level. In the collaborative study (n  =  13 labs) using Salmonella Enteritidis phage type 13a inoculated swabs, there was no significant difference (P > 0.05) between the FDA method (single swabs) and the pooled NPIP method (four-pool swabs). The study concludes that the pooled NPIP method is not significantly different from the FDA method for the detection of Salmonella Enteritidis in drag swabs in commercial poultry laying houses. Consequently based on the FDA's Salmonella Enteritidis rule for equivalency of different methods, the pooled NPIP method should be considered equivalent. Furthermore, the pooled NPIP method was more efficient and cost effective.

  19. Calculation of vitrinite reflectance from thermal histories: A comparison of some methods

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Morrow, D.W.; Issler, D.R.

    1993-04-01

    Vitrinite reflectance values (%R[sub o]) calculated from commonly used methods are compared with respect to time invariant temperatures and constant heating rates. Two monofunctional methods, one involving a time-temperature index to vitrinite reflectance correlation (TTI-%R[sub o]) to depth correlation, yield vitrinite reflectance values that are similar to those calculated by recently published Arrhenius-based methods, such as EASY%R[sub o]. The approximate agreement between these methods supports the perception that the EASY%R[sub o] algorithm is the most accurate method for the prediction of vitrinite reflectances throughout the range of organic maturity normally encountered. However, calibration of these methods against vitrinite reflectance datamore » from two basin sequences with well-documented geologic histories indicates that, although the EASY%R[sub o] method has wide applicability, it slightly overestimates vitrinite reflectances in strata of low to medium maturity up to a %R[sub o] value of 0.9%. The two monofunctional methods may be more accurate for prediction of vitrinite reflectances in similar sequences of low maturity. An older, but previously widely accepted TTI-%R[sub O] correlation consistently overestimates vitrinite reflectances with respect to other methods. Underestimation of paleogeothermal gradients in the original calibration of time-temperature history to vitrinite reflectance may have introduced a systematic bias to the TTI-%R[sub o] correlation used in this method. Also, incorporation of TAI (thermal alteration index) data and its conversion to %R[sub o]-equivalent values may have introduced inaccuracies. 36 refs., 7 figs.« less

  20. Cultural adaptation and translation of measures: an integrated method.

    PubMed

    Sidani, Souraya; Guruge, Sepali; Miranda, Joyal; Ford-Gilboe, Marilyn; Varcoe, Colleen

    2010-04-01

    Differences in the conceptualization and operationalization of health-related concepts may exist across cultures. Such differences underscore the importance of examining conceptual equivalence when adapting and translating instruments. In this article, we describe an integrated method for exploring conceptual equivalence within the process of adapting and translating measures. The integrated method involves five phases including selection of instruments for cultural adaptation and translation; assessment of conceptual equivalence, leading to the generation of a set of items deemed to be culturally and linguistically appropriate to assess the concept of interest in the target community; forward translation; back translation (optional); and pre-testing of the set of items. Strengths and limitations of the proposed integrated method are discussed. (c) 2010 Wiley Periodicals, Inc.

  1. Method for measuring dose-equivalent in a neutron flux with an unknown energy spectra and means for carrying out that method

    DOEpatents

    Distenfeld, Carl H.

    1978-01-01

    A method for measuring the dose-equivalent for exposure to an unknown and/or time varing neutron flux which comprises simultaneously exposing a plurality of neutron detecting elements of different types to a neutron flux and combining the measured responses of the various detecting elements by means of a function, whose value is an approximate measure of the dose-equivalent, which is substantially independent of the energy spectra of the flux. Also, a personnel neutron dosimeter, which is useful in carrying out the above method, comprising a plurality of various neutron detecting elements in a single housing suitable for personnel to wear while working in a radiation area.

  2. New modeling method for the dielectric relaxation of a DRAM cell capacitor

    NASA Astrophysics Data System (ADS)

    Choi, Sujin; Sun, Wookyung; Shin, Hyungsoon

    2018-02-01

    This study proposes a new method for automatically synthesizing the equivalent circuit of the dielectric relaxation (DR) characteristic in dynamic random access memory (DRAM) without frequency dependent capacitance measurement. Charge loss due to DR can be observed by a voltage drop at the storage node and this phenomenon can be analyzed by an equivalent circuit. The Havariliak-Negami model is used to accurately determine the electrical characteristic parameters of an equivalent circuit. The DRAM sensing operation is performed in HSPICE simulations to verify this new method. The simulation demonstrates that the storage node voltage drop resulting from DR and the reduction in the sensing voltage margin, which has a critical impact on DRAM read operation, can be accurately estimated using this new method.

  3. Mechanical properties investigation on single-wall ZrO2 nanotubes: A finite element method with equivalent Poisson's ratio for chemical bonds

    NASA Astrophysics Data System (ADS)

    Yang, Xiao; Li, Huijian; Hu, Minzheng; Liu, Zeliang; Wärnå, John; Cao, Yuying; Ahuja, Rajeev; Luo, Wei

    2018-04-01

    A method to obtain the equivalent Poisson's ratio in chemical bonds as classical beams with finite element method was proposed from experimental data. The UFF (Universal Force Field) method was employed to calculate the elastic force constants of Zrsbnd O bonds. By applying the equivalent Poisson's ratio, the mechanical properties of single-wall ZrNTs (ZrO2 nanotubes) were investigated by finite element analysis. The nanotubes' Young's modulus (Y), Poisson's ratio (ν) of ZrNTs as function of diameters, length and chirality have been discussed, respectively. We found that the Young's modulus of single-wall ZrNTs is calculated to be between 350 and 420 GPa.

  4. Examination of the Equivalence of Self-Report Survey-Based Paper-and-Pencil and Internet Data Collection Methods

    ERIC Educational Resources Information Center

    Weigold, Arne; Weigold, Ingrid K.; Russell, Elizabeth J.

    2013-01-01

    Self-report survey-based data collection is increasingly carried out using the Internet, as opposed to the traditional paper-and-pencil method. However, previous research on the equivalence of these methods has yielded inconsistent findings. This may be due to methodological and statistical issues present in much of the literature, such as…

  5. An Empirical Method for Deriving Grade Equivalence for University Entrance Qualifications: An Application to A Levels and the International Baccalaureate

    ERIC Educational Resources Information Center

    Green, Francis; Vignoles, Anna

    2012-01-01

    We present a method to compare different qualifications for entry to higher education by studying students' subsequent performance. Using this method for students holding either the International Baccalaureate (IB) or A-levels gaining their degrees in 2010, we estimate an "empirical" equivalence scale between IB grade points and UCAS…

  6. Cross-cultural differences in the conceptualisation of patients' satisfaction with psychiatric services--content validity of the English version of the Verona Service Satisfaction Scale.

    PubMed

    Henderson, Claire; Hales, Heidi; Ruggeri, Mirella

    2003-03-01

    The VSSS is a multi-dimensional questionnaire developed to address methodological concerns about measurement of satisfaction with services on the part of psychiatric patients. The acceptability, sensitivity, content validity and test-retest reliability of the original version of the VSSS, in Italian, have already been demonstrated [1, 2]. The internal consistency [3] and test-retest reliability [4] of the English translation have been shown to be within acceptable ranges. The content validity of the original 82-item and the 54-item English version has not yet been assessed. The aims of this study were to assess the content validity of the English translation of the VSSS and to compare it with that of the original version in Italian. We used data collected as part of the first wave (T1) of the PRiSM Psychosis Study [5] and repeated the methods used to assess the content validity of the original Italian version of the VSSS [1, 2]. Content elements derived from answers to four open questions were rated independently by CH and HH in terms of their equivalence to VSSS items or dimensions. were compared to those from the content validity study of the Italian version. Results Inter-rater agreement was very high. The largest proportion of the content elements of the answers were rated as equivalent or related to a questionnaire item or a dimension of the VSSS. The dimension 'Professionals' Skills and Behaviour' appears the most significant contributor to satisfaction, as it was most often related to content elements in answers to all four key questions (39.1 %). The second most frequently mentioned dimension was that of 'Types of Intervention' for three out of four open questions, while 'Access' was second most frequent for the fourth. Of the content elements, 17.2 % did not include items or dimensions covered by the VSSS; the three most frequently mentioned were other patients, food and security. The 82-item English version of the VSSS captures sharply most contents relevant to patients' satisfaction. Consideration of contributors to satisfaction so far neglected may refine the conceptualisation of satisfaction.

  7. Transportability of Equivalence-Based Programmed Instruction: Efficacy and Efficiency in a College Classroom

    ERIC Educational Resources Information Center

    Fienup, Daniel M.; Critchfield, Thomas S.

    2011-01-01

    College students in a psychology research-methods course learned concepts related to inferential statistics and hypothesis decision making. One group received equivalence-based instruction on conditional discriminations that were expected to promote the emergence of many untaught, academically useful abilities (i.e., stimulus equivalence group). A…

  8. Mapping Children's Understanding of Mathematical Equivalence

    ERIC Educational Resources Information Center

    Taylor, Roger S.; Rittle-Johnson, Bethany; Matthews, Percival G.; McEldoon, Katherine L.

    2009-01-01

    The focus of this research is to develop an initial framework for assessing and interpreting students' level of understanding of mathematical equivalence. Although this topic has been studied for many years, there has been no systematic development or evaluation of a valid measure of equivalence knowledge. A powerful method for accomplishing this…

  9. French Sizing of Medical Devices is not Fit for Purpose

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kibriya, Nabil, E-mail: nabskib@yahoo.co.uk; Hall, Rebecca; Powell, Steven

    PurposeThe purpose of the study is to quantify the variation in the metric equivalent of French size in a range of medical devices, from various manufacturers, used in interventional radiology.MethodsThe labelling of a range of catheters, introducers, drains, balloons, stents, and endografts was examined. Products were chosen to achieve a broad range of French sizes from several manufacturers. To assess manufacturing accuracy, eight devices were selected for measurement using a laser micrometer. The external diameters of three specimens of each device were measured at centimeter intervals along the length of the device to ensure uniformity.ResultsA total of 200 labels ofmore » interventional radiology equipment were scrutinized. The results demonstrate a wide variation in the metric equivalent of French sizing. Labelled products can vary in diameter across the product range by up to 0.79 mm.The devices selected for measurement with the non-contact laser micrometer demonstrate acceptable manufacturing consistency. The external diameter differed by 0.05 mm on average.ConclusionsOur results demonstrate wide variation in the interpretation of the French scale by different manufacturers of medical devices. This has the potential to lead to problems using coaxial systems especially when the products are from different manufacturers. It is recommended that standard labelling should be employed by all manufacturers conveying specific details of the equipment. Given the wide variation in the interpretation of the French scale, our opinion is that this scale either needs to be abandoned or be strictly defined and followed.« less

  10. Farmworkers at the border: a bilingual initiative for occupational health and safety.

    PubMed

    Acosta, Martha Soledad Vela; Sechrest, Lee; Chen, Mei-Kuang

    2009-01-01

    Bilingual and bicultural occupational health and safety interventions for Hispanic farmworkers are extremely rare and, because of language barriers and cultural differences, issues important to their health and safety on the job remain unaddressed. We designed, conducted, and assessed the first bilingual occupational health and safety education program for farmworkers attending High School Equivalency Programs (HEPs). We took an interdisciplinary participatory approach by integrating educators and researchers with a community advisory board to guide development, evaluation, and implementation of Work Safely-Trabaje con Cuidado Curriculum (Curriculum), a bilingual occupational health and safety curriculum. We created a quasi-experimental design using mixed-method evaluation (quantitative and qualitative elements) via pre- and posttest comparisons, follow-up surveys, and focus groups assessing the Curriculum effect on knowledge, safety risk perception (SRP), and safety behavior. Focus groups and follow-up surveys reflected success and acceptance of the Curriculum among participating farmworkers under the study's logic model. Completion of the Curriculum resulted in statistically significant improvements in the combined score of knowledge and SRP at the posttest (p = 0.001) and follow-up survey (p = 0.02) in the intervention group. After completing this study, the Curriculum was permanently adopted by the two high school equivalency sites involved. The participatory approach resulted in integration of community and applied research partnership. The potential to expand use of this Curriculum by other HEP sites can further assess effectiveness and external validity among underserved minority groups.

  11. Lessening the Effects of Projection for Line-of-Sight Magnetic Field Data

    NASA Astrophysics Data System (ADS)

    Leka, K. D.; Barnes, Graham; Wagner, Eric

    2016-05-01

    A method for treating line-of-sight magnetic field data (Blos) is developed for the goal of reconstructing the radially-directed component (Br) of the solar photospheric magnetic field. The latter is generally the desired quantity for use as a boundary for modeling efforts and observational interpretation of the surface field, but the two are only equivalent where the viewing angle is exactly zero (μ=1.0). A common approximation known as the "μ-correction", which assumes all photospheric field to be radial, is compared to a method which invokes a potential field constructed to match the observed Blos (Alissandrakis 1981; Sakurai 1982), from which the potential field radial field component (Brpot) is recovered.We compare this treatment of Blos data to the radial component derived from SDO/HMI full-disk vector magnetograms as the "ground truth", and discuss the implications for data analysis and modeling efforts. In regions that are truly dominated by radial field, the μ-correction performs acceptably if not better than the potential-field approach. However, for any solar structure which includes horizontal fields, i.e. active regions, the potential-field method better recovers magnetic neutral line location and the inferred strength of the radial field.This work was made possible through contracts with NASA, NSF, and NOAA/SBIR.

  12. Could EBT Machines Increase Fruit and Vegetable Purchases at New York City Green Carts?

    PubMed Central

    Breck, Andrew; Kiszko, Kamila; Martinez, Olivia; Abrams, Courtney

    2017-01-01

    Introduction Residents of some low-income neighborhoods have limited access to fresh fruits and vegetables. In 2008, New York City issued new mobile fruit and vegetable cart licenses for neighborhoods with inadequate availability of fresh produce. Some of these carts were equipped with electronic benefit transfer (EBT) machines, allowing them to accept Supplemental Nutrition Assistance Program (SNAP) benefits. This article examines the association between type and quantities of fruits and vegetables purchased from mobile fruit and vegetable vendors and consumer characteristics, including payment method. Methods Customers at 4 produce carts in the Bronx, New York, were surveyed during 3 periods in 2013 and 2014. Survey data, including purchased fruit and vegetable quantities, were analyzed using multivariable negative binomial regressions, with payment method (cash only vs EBT or EBT and cash) as the primary independent variable. Covariates included availability of EBT, vendor, and customer sociodemographic characteristics. Results A total of 779 adults participated in this study. Shoppers who used SNAP benefits purchased an average of 5.4 more cup equivalents of fruits and vegetables than did shoppers who paid with cash. Approximately 80% of this difference was due to higher quantities of purchased fruits. Conclusion Expanding access to EBT machines at mobile produce carts may increase purchases of fruits and vegetables from these vendors. PMID:28934080

  13. A robust approach to measuring the detective quantum efficiency of radiographic detectors in a clinical setting

    NASA Astrophysics Data System (ADS)

    McDonald, Michael C.; Kim, H. K.; Henry, J. R.; Cunningham, I. A.

    2012-03-01

    The detective quantum efficiency (DQE) is widely accepted as a primary measure of x-ray detector performance in the scientific community. A standard method for measuring the DQE, based on IEC 62220-1, requires the system to have a linear response meaning that the detector output signals are proportional to the incident x-ray exposure. However, many systems have a non-linear response due to characteristics of the detector, or post processing of the detector signals, that cannot be disabled and may involve unknown algorithms considered proprietary by the manufacturer. For these reasons, the DQE has not been considered as a practical candidate for routine quality assurance testing in a clinical setting. In this article we described a method that can be used to measure the DQE of both linear and non-linear systems that employ only linear image processing algorithms. The method was validated on a Cesium Iodide based flat panel system that simultaneously stores a raw (linear) and processed (non-linear) image for each exposure. It was found that the resulting DQE was equivalent to a conventional standards-compliant DQE with measurement precision, and the gray-scale inversion and linear edge enhancement did not affect the DQE result. While not IEC 62220-1 compliant, it may be adequate for QA programs.

  14. Mixing Single Scattering Properties in Vector Radiative Transfer for Deterministic and Stochastic Solutions

    NASA Astrophysics Data System (ADS)

    Mukherjee, L.; Zhai, P.; Hu, Y.; Winker, D. M.

    2016-12-01

    Among the primary factors, which determine the polarized radiation, field of a turbid medium are the single scattering properties of the medium. When multiple types of scatterers are present, the single scattering properties of the scatterers need to be properly mixed in order to find the solutions to the vector radiative transfer theory (VRT). The VRT solvers can be divided into two types: deterministic and stochastic. The deterministic solver can only accept one set of single scattering property in its smallest discretized spatial volume. When the medium contains more than one kind of scatterer, their single scattering properties are averaged, and then used as input for the deterministic solver. The stochastic solver, can work with different kinds of scatterers explicitly. In this work, two different mixing schemes are studied using the Successive Order of Scattering (SOS) method and Monte Carlo (MC) methods. One scheme is used for deterministic and the other is used for the stochastic Monte Carlo method. It is found that the solutions from the two VRT solvers using two different mixing schemes agree with each other extremely well. This confirms the equivalence to the two mixing schemes and also provides a benchmark for the VRT solution for the medium studied.

  15. Value of ultrasonography in the diagnosis of polycystic ovary syndrome - literature review.

    PubMed

    Bachanek, Michał; Abdalla, Nebil; Cendrowski, Krzysztof; Sawicki, Włodzimierz

    2015-12-01

    Polycystic ovary syndrome is a multi-factorial disease. Its etiopathogenesis has not been elucidated in detail. It is the most common endocrine disorder in women of child-bearing age. This disease entity is primarily characterized by disrupted ovulation and hyperandrogenism, but the clinical picture can be diversified and symptom intensity can vary. Currently, the sonographic assessment of ovaries is one of the obligatory criteria for the diagnosis of PCOS according to the Rotterdam consensus (2003) and Androgen Excess & PCOS Society (2006). This criterion is determined by the presence of ≥12 follicles within the ovary with a diameter of 2-9 mm and/or ovarian volume ≥10 cm(3). Such an ultrasound image in one gonad only is sufficient to define polycystic ovaries. The coexistence of polycystic ovaries with polycystic ovary syndrome is confirmed in over 90% of cases irrespective of ethnic factors or race. However, because of the commonness of ultrasound features of polycystic ovaries in healthy women, the inclusion of this sign to the diagnostic criteria of polycystic ovary syndrome is still questioned. The development of new technologies has an undoubted influence on the percentage of diagnosed polycystic ovaries. This process has caused an increase in the percentage of polycystic ovary diagnoses since the Rotterdam criteria were published. It is therefore needed to prepare new commonly accepted diagnostic norms concerning the number of ovarian follicles and the standardization of the technique in which they are counted. The assessment of anti-Müllerian hormone levels as an equivalent of ultrasound features of polycystic ovaries is a promising method. However, analytic methods have to be standardized in order to establish commonly accepted diagnostic norms.

  16. Value of ultrasonography in the diagnosis of polycystic ovary syndrome – literature review

    PubMed Central

    Abdalla, Nebil; Cendrowski, Krzysztof; Sawicki, Włodzimierz

    2015-01-01

    Polycystic ovary syndrome is a multi-factorial disease. Its etiopathogenesis has not been elucidated in detail. It is the most common endocrine disorder in women of child-bearing age. This disease entity is primarily characterized by disrupted ovulation and hyperandrogenism, but the clinical picture can be diversified and symptom intensity can vary. Currently, the sonographic assessment of ovaries is one of the obligatory criteria for the diagnosis of PCOS according to the Rotterdam consensus (2003) and Androgen Excess & PCOS Society (2006). This criterion is determined by the presence of ≥12 follicles within the ovary with a diameter of 2–9 mm and/or ovarian volume ≥10 cm3. Such an ultrasound image in one gonad only is sufficient to define polycystic ovaries. The coexistence of polycystic ovaries with polycystic ovary syndrome is confirmed in over 90% of cases irrespective of ethnic factors or race. However, because of the commonness of ultrasound features of polycystic ovaries in healthy women, the inclusion of this sign to the diagnostic criteria of polycystic ovary syndrome is still questioned. The development of new technologies has an undoubted influence on the percentage of diagnosed polycystic ovaries. This process has caused an increase in the percentage of polycystic ovary diagnoses since the Rotterdam criteria were published. It is therefore needed to prepare new commonly accepted diagnostic norms concerning the number of ovarian follicles and the standardization of the technique in which they are counted. The assessment of anti-Müllerian hormone levels as an equivalent of ultrasound features of polycystic ovaries is a promising method. However, analytic methods have to be standardized in order to establish commonly accepted diagnostic norms. PMID:26807298

  17. Prediction of the distillation temperatures of crude oils using ¹H NMR and support vector regression with estimated confidence intervals.

    PubMed

    Filgueiras, Paulo R; Terra, Luciana A; Castro, Eustáquio V R; Oliveira, Lize M S L; Dias, Júlio C M; Poppi, Ronei J

    2015-09-01

    This paper aims to estimate the temperature equivalent to 10% (T10%), 50% (T50%) and 90% (T90%) of distilled volume in crude oils using (1)H NMR and support vector regression (SVR). Confidence intervals for the predicted values were calculated using a boosting-type ensemble method in a procedure called ensemble support vector regression (eSVR). The estimated confidence intervals obtained by eSVR were compared with previously accepted calculations from partial least squares (PLS) models and a boosting-type ensemble applied in the PLS method (ePLS). By using the proposed boosting strategy, it was possible to identify outliers in the T10% property dataset. The eSVR procedure improved the accuracy of the distillation temperature predictions in relation to standard PLS, ePLS and SVR. For T10%, a root mean square error of prediction (RMSEP) of 11.6°C was obtained in comparison with 15.6°C for PLS, 15.1°C for ePLS and 28.4°C for SVR. The RMSEPs for T50% were 24.2°C, 23.4°C, 22.8°C and 14.4°C for PLS, ePLS, SVR and eSVR, respectively. For T90%, the values of RMSEP were 39.0°C, 39.9°C and 39.9°C for PLS, ePLS, SVR and eSVR, respectively. The confidence intervals calculated by the proposed boosting methodology presented acceptable values for the three properties analyzed; however, they were lower than those calculated by the standard methodology for PLS. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. A statistical assessment of differences and equivalences between genetically modified and reference plant varieties

    PubMed Central

    2011-01-01

    Background Safety assessment of genetically modified organisms is currently often performed by comparative evaluation. However, natural variation of plant characteristics between commercial varieties is usually not considered explicitly in the statistical computations underlying the assessment. Results Statistical methods are described for the assessment of the difference between a genetically modified (GM) plant variety and a conventional non-GM counterpart, and for the assessment of the equivalence between the GM variety and a group of reference plant varieties which have a history of safe use. It is proposed to present the results of both difference and equivalence testing for all relevant plant characteristics simultaneously in one or a few graphs, as an aid for further interpretation in safety assessment. A procedure is suggested to derive equivalence limits from the observed results for the reference plant varieties using a specific implementation of the linear mixed model. Three different equivalence tests are defined to classify any result in one of four equivalence classes. The performance of the proposed methods is investigated by a simulation study, and the methods are illustrated on compositional data from a field study on maize grain. Conclusions A clear distinction of practical relevance is shown between difference and equivalence testing. The proposed tests are shown to have appropriate performance characteristics by simulation, and the proposed simultaneous graphical representation of results was found to be helpful for the interpretation of results from a practical field trial data set. PMID:21324199

  19. Exposure of the surgeon's hands to radiation during hand surgery procedures.

    PubMed

    Żyluk, Andrzej; Puchalski, Piotr; Szlosser, Zbigniew; Dec, Paweł; Chrąchol, Joanna

    2014-01-01

    The objective of the study was to assess the time of exposure of the surgeon's hands to radiation and calculate of the equivalent dose absorbed during surgery of hand and wrist fractures with C-arm fluoroscope guidance. The necessary data specified by the objective of the study were acquired from operations of 287 patients with fractures of fingers, metacarpals, wrist bones and distal radius. 218 operations (78%) were percutaneous procedures and 60 (22%) were performed by open method. Data on the time of exposure and dose of radiation were acquired from the display of the fluoroscope, where they were automatically generated. These data were assigned to the individual patient, type of fracture, method of surgery and the operating surgeon. Fixations of distal radial fractures required longer times of radiation exposure (mean 61 sec.) than fractures of the wrist/metacarpals and fingers (38 and 32 sec., respectively), which was associated with absorption of significantly higher equivalent doses. Fixations of distal radial fractures by open method were associated with statistically significantly higher equivalent doses (0.41 mSv) than percutaneous procedures (0.3 mSv). Fixations of wrist and metacarpal bone fractures by open method were associated with lower equivalent doses (0.34 mSv) than percutaneous procedures (0.37 mSv),but the difference was not significant. Fixations of finger fractures by open method were associated with lower equivalent doses (0.13 mSv) than percutaneous procedures (0.24 mSv), the difference being statistically non-significant. Statistically significant differences in exposure time and equivalent doses were noted between 4 surgeons participating in the study, but no definitive relationship was found between these parameters and surgeons' employment time. 1. Hand surgery procedures under fluoroscopic guidance are associated with mild exposure of the surgeons' hands to radiation. 2. The equivalent dose was related to the type of fracture, operative technique and - to some degree - to the time of employment of the surgeon.

  20. A comparative appraisal of two equivalence tests for multiple standardized effects.

    PubMed

    Shieh, Gwowen

    2016-04-01

    Equivalence testing is recommended as a better alternative to the traditional difference-based methods for demonstrating the comparability of two or more treatment effects. Although equivalent tests of two groups are widely discussed, the natural extensions for assessing equivalence between several groups have not been well examined. This article provides a detailed and schematic comparison of the ANOVA F and the studentized range tests for evaluating the comparability of several standardized effects. Power and sample size appraisals of the two grossly distinct approaches are conducted in terms of a constraint on the range of the standardized means when the standard deviation of the standardized means is fixed. Although neither method is uniformly more powerful, the studentized range test has a clear advantage in sample size requirements necessary to achieve a given power when the underlying effect configurations are close to the priori minimum difference for determining equivalence. For actual application of equivalence tests and advance planning of equivalence studies, both SAS and R computer codes are available as supplementary files to implement the calculations of critical values, p-values, power levels, and sample sizes. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  1. Fatigue acceptance test limit criterion for larger diameter rolled thread fasteners

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kephart, A.R.

    1997-05-01

    This document describes a fatigue lifetime acceptance test criterion by which studs having rolled threads, larger than 1.0 inches in diameter, can be assured to meet minimum quality attributes associated with a controlled rolling process. This criterion is derived from a stress dependent, room temperature air fatigue database for test studs having a 0.625 inch diameter threads of Alloys X-750 HTH and direct aged 625. Anticipated fatigue lives of larger threads are based on thread root elastic stress concentration factors which increase with increasing thread diameters. Over the thread size range of interest, a 30% increase in notch stress ismore » equivalent to a factor of five (5X) reduction in fatigue life. The resulting diameter dependent fatigue acceptance criterion is normalized to the aerospace rolled thread acceptance standards for a 1.0 inch diameter, 0.125 inch pitch, Unified National thread with a controlled Root radius (UNR). Testing was conducted at a stress of 50% of the minimum specified material ultimate strength, 80 Ksi, and at a stress ratio (R) of 0.10. Limited test data for fastener diameters of 1.00 to 2.25 inches are compared to the acceptance criterion. Sensitivity of fatigue life of threads to test nut geometry variables was also shown to be dependent on notch stress conditions. Bearing surface concavity of the compression nuts and thread flank contact mismatch conditions can significantly affect the fastener fatigue life. Without improved controls these conditions could potentially provide misleading acceptance data. Alternate test nut geometry features are described and implemented in the rolled thread stud specification, MIL-DTL-24789(SH), to mitigate the potential effects on fatigue acceptance data.« less

  2. 40 CFR 53.4 - Applications for reference or equivalent method determinations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... using information such as service reports and customer complaints to eliminate potential causes of... standards of good practice and by qualified personnel. Test anomalies or irregularities shall be documented... designated as a reference or equivalent method, to ensure that all analyzers or samplers offered for sale...

  3. Exact test-based approach for equivalence test with parameter margin.

    PubMed

    Cassie Dong, Xiaoyu; Bian, Yuanyuan; Tsong, Yi; Wang, Tianhua

    2017-01-01

    The equivalence test has a wide range of applications in pharmaceutical statistics which we need to test for the similarity between two groups. In recent years, the equivalence test has been used in assessing the analytical similarity between a proposed biosimilar product and a reference product. More specifically, the mean values of the two products for a given quality attribute are compared against an equivalence margin in the form of ±f × σ R , where ± f × σ R is a function of the reference variability. In practice, this margin is unknown and is estimated from the sample as ±f × S R . If we use this estimated margin with the classic t-test statistic on the equivalence test for the means, both Type I and Type II error rates may inflate. To resolve this issue, we develop an exact-based test method and compare this method with other proposed methods, such as the Wald test, the constrained Wald test, and the Generalized Pivotal Quantity (GPQ) in terms of Type I error rate and power. Application of those methods on data analysis is also provided in this paper. This work focuses on the development and discussion of the general statistical methodology and is not limited to the application of analytical similarity.

  4. A comparison of quantum limited dose and noise equivalent dose

    NASA Astrophysics Data System (ADS)

    Job, Isaias D.; Boyce, Sarah J.; Petrillo, Michael J.; Zhou, Kungang

    2016-03-01

    Quantum-limited-dose (QLD) and noise-equivalent-dose (NED) are performance metrics often used interchangeably. Although the metrics are related, they are not equivalent unless the treatment of electronic noise is carefully considered. These metrics are increasingly important to properly characterize the low-dose performance of flat panel detectors (FPDs). A system can be said to be quantum-limited when the Signal-to-noise-ratio (SNR) is proportional to the square-root of x-ray exposure. Recent experiments utilizing three methods to determine the quantum-limited dose range yielded inconsistent results. To investigate the deviation in results, generalized analytical equations are developed to model the image processing and analysis of each method. We test the generalized expression for both radiographic and fluoroscopic detectors. The resulting analysis shows that total noise content of the images processed by each method are inherently different based on their readout scheme. Finally, it will be shown that the NED is equivalent to the instrumentation-noise-equivalent-exposure (INEE) and furthermore that the NED is derived from the quantum-noise-only method of determining QLD. Future investigations will measure quantum-limited performance of radiographic panels with a modified readout scheme to allow for noise improvements similar to measurements performed with fluoroscopic detectors.

  5. Equivalent complex conductivities representing the effects of T-tubules and folded surface membranes on the electrical admittance and impedance of skeletal muscles measured by external-electrode method

    NASA Astrophysics Data System (ADS)

    Sekine, Katsuhisa

    2017-12-01

    In order to represent the effects of T-tubules and folded surface membranes on the electrical admittance and impedance of skeletal muscles measured by the external-electrode method, analytical relations for the equivalent complex conductivities of hypothetical smooth surface membranes were derived. In the relations, the effects of each tubule were represented by the admittance of a straight cable. The effects of the folding of a surface membrane were represented by the increased area of surface membranes. The equivalent complex conductivities were represented as summation of these effects, and the effects of the T-tubules were different between the transversal and longitudinal directions. The validity of the equivalent complex conductivities was supported by the results of finite-difference method (FDM) calculations made using three-dimensional models in which T-tubules and folded surface membranes were represented explicitly. FDM calculations using the equivalent complex conductivities suggested that the electrically inhomogeneous structure due to the existence of muscle cells with T-tubules was sufficient for explaining the experimental results previously obtained using the external-electrode method. Results of FDM calculations in which the structural changes caused by muscle contractions were taken into account were consistent with the reported experimental results.

  6. Equivalent Skin Analysis of Wing Structures Using Neural Networks

    NASA Technical Reports Server (NTRS)

    Liu, Youhua; Kapania, Rakesh K.

    2000-01-01

    An efficient method of modeling trapezoidal built-up wing structures is developed by coupling. in an indirect way, an Equivalent Plate Analysis (EPA) with Neural Networks (NN). Being assumed to behave like a Mindlin-plate, the wing is solved using the Ritz method with Legendre polynomials employed as the trial functions. This analysis method can be made more efficient by avoiding most of the computational effort spent on calculating contributions to the stiffness and mass matrices from each spar and rib. This is accomplished by replacing the wing inner-structure with an "equivalent" material that combines to the skin and whose properties are simulated by neural networks. The constitutive matrix, which relates the stress vector to the strain vector, and the density of the equivalent material are obtained by enforcing mass and stiffness matrix equities with rec,ard to the EPA in a least-square sense. Neural networks for the material properties are trained in terms of the design variables of the wing structure. Examples show that the present method, which can be called an Equivalent Skin Analysis (ESA) of the wing structure, is more efficient than the EPA and still fairly good results can be obtained. The present ESA is very promising to be used at the early stages of wing structure design.

  7. Sample size allocation in multiregional equivalence studies.

    PubMed

    Liao, Jason J Z; Yu, Ziji; Li, Yulan

    2018-06-17

    With the increasing globalization of drug development, the multiregional clinical trial (MRCT) has gained extensive use. The data from MRCTs could be accepted by regulatory authorities across regions and countries as the primary sources of evidence to support global marketing drug approval simultaneously. The MRCT can speed up patient enrollment and drug approval, and it makes the effective therapies available to patients all over the world simultaneously. However, there are many challenges both operationally and scientifically in conducting a drug development globally. One of many important questions to answer for the design of a multiregional study is how to partition sample size into each individual region. In this paper, two systematic approaches are proposed for the sample size allocation in a multiregional equivalence trial. A numerical evaluation and a biosimilar trial are used to illustrate the characteristics of the proposed approaches. Copyright © 2018 John Wiley & Sons, Ltd.

  8. Radiation Induced Degradation of the White Thermal Control Paints Z-93 and Z-93P

    NASA Technical Reports Server (NTRS)

    Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, J. A.; Kamenetzky, R. R.; Finckenor, M. M.; Meshishnek, M. J.

    1996-01-01

    This paper details a comparison analysis of the zinc oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 years in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

  9. Radiation Induced Degradation of White Thermal Control Paint

    NASA Technical Reports Server (NTRS)

    Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, Jason A.; Kamenetzky, Rachel R.; Finckenor, M. M.; Meshishnek, M. J.

    1999-01-01

    This paper details a comparison analysis of the zinc-oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 yr in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent Sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

  10. Physical activity monitoring: addressing the difficulties of accurately detecting slow walking speeds.

    PubMed

    Harrison, Samantha L; Horton, Elizabeth J; Smith, Robert; Sandland, Carolyn J; Steiner, Michael C; Morgan, Mike D L; Singh, Sally J

    2013-01-01

    To test the accuracy of a multi-sensor activity monitor (SWM) in detecting slow walking speeds in patients with chronic obstructive pulmonary disease (COPD). Concerns have been expressed regarding the use of pedometers in patient populations. Although activity monitors are more sophisticated devices, their accuracy at detecting slow walking speeds common in patients with COPD has yet to be proven. A prospective observational study design was employed. An incremental shuttle walk test (ISWT) was completed by 57 patients with COPD wearing an SWM. The ISWT was repeated by 20 patients wearing the same SWM. Differences were identified between metabolic equivalents (METS) and between step-count across five levels of the ISWT (p < 0.001). Good within monitor reproducibility between two ISWT was identified for total energy expenditure and step-count (p < 0.001). The SWM is able to detect slow (standardized) speeds of walking and is an acceptable method for measuring physical activity in individuals disabled by COPD. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. Will Brazilian Patented Naturoptic Method for Recovery of Healthy Vision be Helpful Linguistically?

    NASA Astrophysics Data System (ADS)

    de Moraes, Ana Paula; Dos Santos Marques, Rosélia; Mc Leod, Roger David

    2008-10-01

    Naturoptics Inc. extends its patent(s) to further the teaching of vision-restoring process(es), foster cross-linguistic capabilities, and assist in the educational or financial opportunities of individuals and countries. Directors of Naturoptics Inc. hope to achieve this while testing David Matthew Mc Leod's observations that high visual acuity correlates with other mental and sensory processes. He and RDM often noticed that thought concepts (language percepts) are detectable even across species barriers, as when bears, moose, et c. made their intentions known to us in ways we were culturally willing to accept. This addresses aspects of language that seemed related to our understanding of human vision, and how it encodes cortically by spatial frequency content of a visual scene. Words representing the same meaning in two different languages will encode at precisely the same site in the visual cortex. Predictions: ``our memories,'' and cross-species, detection of certain thoughts, if equivalently ``seen'' as images, (spatial frequency content).

  12. The validation of tomotherapy dose calculations in low-density lung media

    NASA Astrophysics Data System (ADS)

    Chaudhari, Summer R.; Pechenaya, Olga L.; Goddu, S. Murty; Mutic, Sasa; Rangaraj, Dharanipathy; Bradley, Jeffrey D.; Low, Daniel

    2009-04-01

    The dose-calculation accuracy of the tomotherapy Hi-Art II® (Tomotherapy, Inc., Madison, WI) treatment planning system (TPS) in the presence of low-density lung media was investigated. In this evaluation, a custom-designed heterogeneous phantom mimicking the mediastinum geometry was used. Gammex LN300 and balsa wood were selected as two lung-equivalent materials with different densities. Film analysis and ionization chamber measurements were performed. Treatment plans for esophageal cancers were used in the evaluation. The agreement between the dose calculated by the TPS and the dose measured via ionization chambers was, in most cases, within 0.8%. Gamma analysis using 3% and 3 mm criteria for radiochromic film dosimetry showed that 98% and 95% of the measured dose distribution had passing gamma values <=1 for LN300 and balsa wood, respectively. For a homogeneous water-equivalent phantom, 95% of the points passed the gamma test. It was found that for the interface between the low-density medium and water-equivalent medium, the TPS calculated the dose distribution within acceptable limits. The phantom developed for this work enabled detailed quality-assurance testing under realistic conditions with heterogeneous media.

  13. The validation of tomotherapy dose calculations in low-density lung media.

    PubMed

    Chaudhari, Summer R; Pechenaya, Olga L; Goddu, S Murty; Mutic, Sasa; Rangaraj, Dharanipathy; Bradley, Jeffrey D; Low, Daniel

    2009-04-21

    The dose-calculation accuracy of the tomotherapy Hi-Art II(R) (Tomotherapy, Inc., Madison, WI) treatment planning system (TPS) in the presence of low-density lung media was investigated. In this evaluation, a custom-designed heterogeneous phantom mimicking the mediastinum geometry was used. Gammex LN300 and balsa wood were selected as two lung-equivalent materials with different densities. Film analysis and ionization chamber measurements were performed. Treatment plans for esophageal cancers were used in the evaluation. The agreement between the dose calculated by the TPS and the dose measured via ionization chambers was, in most cases, within 0.8%. Gamma analysis using 3% and 3 mm criteria for radiochromic film dosimetry showed that 98% and 95% of the measured dose distribution had passing gamma values < or =1 for LN300 and balsa wood, respectively. For a homogeneous water-equivalent phantom, 95% of the points passed the gamma test. It was found that for the interface between the low-density medium and water-equivalent medium, the TPS calculated the dose distribution within acceptable limits. The phantom developed for this work enabled detailed quality-assurance testing under realistic conditions with heterogeneous media.

  14. Formal Requirements-Based Programming for Complex Systems

    NASA Technical Reports Server (NTRS)

    Rash, James L.; Hinchey, Michael G.; Rouff, Christopher A.; Gracanin, Denis

    2005-01-01

    Computer science as a field has not yet produced a general method to mechanically transform complex computer system requirements into a provably equivalent implementation. Such a method would be one major step towards dealing with complexity in computing, yet it remains the elusive holy grail of system development. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that such tools and methods leave unfilled is that the formal models cannot be proven to be equivalent to the system requirements as originated by the customer For the classes of complex systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations. While other techniques are available, this method is unique in offering full mathematical tractability while using notations and techniques that are well known and well trusted. We illustrate the application of the method to an example procedure from the Hubble Robotic Servicing Mission currently under study and preliminary formulation at NASA Goddard Space Flight Center.

  15. Awareness of environmental issues and the acceptance of CFC-free inhalers.

    PubMed

    Goh, S Y; Arulanandam, S; Ho, C L; Zhang, L; Goh, D Y; Chew, F T; Lee, B W

    1998-09-01

    With the recent availability of a chlorofluorocarbon (CFC)-free metered dose inhaler (MDI) (Airomir), a patient survey was carried out to evaluate awareness of the role of CFCs in our environment and acceptance of this new inhaler. A questionnaire survey was conducted on parents and guardians of 201 children. Depending on respondents' preference, the interview was conducted in English (71%), Chinese (23%), Malay (5%) or Tamil (1%). A 'taste' test was also conducted on 103 of these children. Only 13% (26/201) of parents/guardians were aware that MDIs contained CFCs. Although 70% of children were in favour of the new taste of the CFC-free inhaler, the cost of the new inhaler was an important consideration for parents and guardians in their decision to switch to the new inhaler. The majority (93%) were willing to switch if its cost were equivalent to their current inhaler. This study has provided pertinent information with regard to acceptance of CFC-free inhalers which should be considered when making the inevitable switch to environmentally friendly inhalers.

  16. Case studies with new excipients: development, implementation and regulatory approval.

    PubMed

    Koo, Otilia M Y; Varia, Sailesh A

    2011-07-01

    The purpose of this article is to describe the process whereby new excipients become accepted and to describe three case studies to illustrate the process. New excipients are defined according to the 2005 FDA Guidance on Nonclinical Safety Evaluation of New Excipients. The requirements for safety data submission for new excipients used in different classes of products for different durations are outlined in the guidance. Currently, the development of new excipients is linked to the development and approval of new drug products that contain them. New excipients that are used in US-approved drug products become listed in the FDA Inactive Ingredients Guide (IIG) database. Thereafter, US Pharmacopeia monographs for the new excipients are proposed. New excipients are reviewed and become accepted in the same way in Europe and Japan, except that there is no equivalent IIG database. Therefore, the focus of this article will be on the FDA review process. Three case studies, polyoxyl 15 hydroxystearate, sulfobutyl ether cyclodextrin and silicified microcrystalline cellulose, are used to illustrate how new excipients are accepted and implemented.

  17. Performance of the JT-60SA cryogenic system under pulsed heat loads during acceptance tests

    NASA Astrophysics Data System (ADS)

    Hoa, C.; Bonne, F.; Roussel, P.; Lamaison, V.; Girard, S.; Fejoz, P.; Goncalves, R.; Vallet, J. C.; Legrand, J.; Fabre, Y.; Pudys, V.; Wanner, M.; Cardella, A.; Di Pietro, E.; Kamiya, K.; Natsume, K.; Ohtsu, K.; Oishi, M.; Honda, A.; Kashiwa, Y.; Kizu, K.

    2017-12-01

    The JT-60SA cryogenic system a superconducting tokamak currently under assembly at Naka, Japan. After one year of commissioning, the acceptance tests were successfully completed in October 2016 in close collaboration with Air Liquide Advanced Technologies (ALaT), the French atomic and alternative energies commission (CEA), Fusion for Energy (F4E) and the Quantum Radiological Science and Technology (QST). The cryogenic system has several cryogenic users at various temperatures: the superconducting magnets at 4.4 K, the current leads at 50 K, the thermal shields at 80 K and the divertor cryo-pumps at 3.7 K. The cryogenic system has an equivalent refrigeration power of about 9.5 kW at 4.5 K, with peak loads caused by the nuclear heating, the eddy currents in the structures and the AC losses in the magnets during cyclic plasma operation. The main results of the acceptance tests will be reported, with emphasis on the management of the challenging pulsed load operation using a liquid helium volume of 7 m3 as a thermal damper.

  18. A Profilometry-Based Dentifrice Abrasion Method for V8 Brushing Machines Part II: Comparison of RDA-PE and Radiotracer RDA Measures.

    PubMed

    Schneiderman, Eva; Colón, Ellen; White, Donald J; St John, Samuel

    2015-01-01

    The purpose of this study was to compare the abrasivity of commercial dentifrices by two techniques: the conventional gold standard radiotracer-based Radioactive Dentin Abrasivity (RDA) method; and a newly validated technique based on V8 brushing that included a profilometry-based evaluation of dentin wear. This profilometry-based method is referred to as RDA-Profilometry Equivalent, or RDA-PE. A total of 36 dentifrices were sourced from four global dentifrice markets (Asia Pacific [including China], Europe, Latin America, and North America) and tested blindly using both the standard radiotracer (RDA) method and the new profilometry method (RDA-PE), taking care to follow specific details related to specimen preparation and treatment. Commercial dentifrices tested exhibited a wide range of abrasivity, with virtually all falling well under the industry accepted upper limit of 250; that is, 2.5 times the level of abrasion measured using an ISO 11609 abrasivity reference calcium pyrophosphate as the reference control. RDA and RDA-PE comparisons were linear across the entire range of abrasivity (r2 = 0.7102) and both measures exhibited similar reproducibility with replicate assessments. RDA-PE assessments were not just linearly correlated, but were also proportional to conventional RDA measures. The linearity and proportionality of the results of the current study support that both methods (RDA or RDA-PE) provide similar results and justify a rationale for making the upper abrasivity limit of 250 apply to both RDA and RDA-PE.

  19. Evaluation of Cleanliness Test Methods for Spacecraft PCB Assemblies

    NASA Astrophysics Data System (ADS)

    Tegehall, P.-E.; Dunn, B. D.

    2006-10-01

    Ionic contamination on printed-circuit-board assemblies may cause current leakage and short-circuits. The present cleanliness requirement in ECSS-Q-70-08, "The manual soldering of high-reliability electrical connections", is that the ionic contamination shall be less than 1.56 fl-glcm2 NaCI equivalents. The relevance of the method used for measurement of the ionic contamination level, resistivity of solvent extract, has been questioned. Alternative methods are ion chromatography and measurement of surface insulation resistance, but these methods also have their drawbacks. These methods are first described and their advantages and drawbacks are discussed. This is followed by an experimental evaluation of the three methods. This was done by soldering test vehicles at four manufacturers of space electronics using their ordinary processes for soldering and cleaning printed board assemblies. The experimental evaluation showed that the ionic contamination added by the four assemblers was very small and well below the acceptance criterion in ECSS-Q-70-80. Ion-chromatography analysis showed that most of the ionic contamination on the cleaned assembled boards originated from the hot-oil fusing of the printed circuit boards. Also, the surface insulation resistance was higher on the assembled boards compared to the bare printed circuit boards. Since strongly activated fluxes are normally used when printed circuit boards are hot-oil fused, it is essential that they are thoroughly cleaned in order to achieve low contamination levels on the final printed-board assemblies.

  20. Fatigue and Fracture-Toughness Characterization of SAW and SMA A537 Class I Ship-Steel Weldments.

    DTIC Science & Technology

    1981-12-01

    Charpy criterion and proposed NDT-DT criterion of Rolfe . Recommendations are made and further research is suggested to help clarify the assessment of...acceptable performance at -60aF. Likewise, at -60OF the NDT and DT data for these weldments marginally exceed the criteria proposed by Rolfe when the...exceed the CVN values equivalent to the 5/8 DT values required by Rolfe . The 5/8-inch dynamic-tear specimen is not recommended as a quality-control test

  1. Common Risk Criteria for National Test Ranges

    DTIC Science & Technology

    2010-12-01

    AFSPCMAN 91 - 710 . See footnote on previous page. Common Risk Criteria Standards For National Test Ranges, RCC Standard 321-10, December 2010 2-10...choice of 1/ 3 is consistent with the recommendation in Air Force Space Command (AFSPC) Manual 91 - 710VI, 1 July 2004, which uses 30×10 -6 as the...acceptability criterion for casualty expectation. In the range between 10 and 30×10 -6 (equivalent to one third of the risk criterion), AFSPCMAN 91 -710V1

  2. Drilling Holes in Graphite/Epoxy

    NASA Technical Reports Server (NTRS)

    Minlionica, Ronald

    1987-01-01

    Relatively long-lived bit produces high-quality holes. Effective combination of cutting-tool design, feed, and speed determined for drilling 3/16-and-1/4-in. (0.48-and 0.65-cm) diameter holes in 0.18 in. (0.46cm) thick GM3013A or equivalent graphite/epoxy corrugated spar without backup material and without coolant. Developed to produce holes in blind areas, optimal techniques yielded holes of high quality, with minimal or acceptable delamination and/or fiber extension on drill-exit side.

  3. Presentation of the Letter of Offer and Acceptance to Iran for the F-16: A Case Study.

    DTIC Science & Technology

    1979-06-01

    terms of man- power and/or dollars? a. Man-years $ (Contract). b. Man-years $ (In-house). 4. Often it is not possible to attach equivalent dollar...the program, as well as its recent expasion into some sensitive centers of power - iran, Israel, Saudi Arabia, Egypt-have brought arms transfers...tasks are to be performed, and how much money is involved, the LOA is a uniquely powerful document. Yet surprisingly, the first-and only--analysis and

  4. A Guide for Emergency Evacuation Management and Operations

    DTIC Science & Technology

    1981-02-01

    such as scrambled eggs (A.M. meal) and hash or stew (P.M. meal). Frequent cold meals are possible. Some relocation guidance indicates that...cheese; and nuts) 4 lbs. with bone Eggs 6 eggs Milk (fresh) 7 pints (If fresh fluid milk is not available, see Exhibit 20.2 for acceptable substitutes...Unit Equivalent Unit Substitute Foods Meat and Meat 1/2 lb. Cereal and cereal products Alternates 1/4 lb. Food fats and oils 12 Eggs 1 lb. boneless 2-3

  5. Determinants of Mobile Learning Acceptance: An Empirical Investigation in Higher Education

    ERIC Educational Resources Information Center

    Akour, Hassan

    2010-01-01

    Scope and method of study: The purpose of this study was to investigate the determinants of mobile learning acceptance in higher education. Mobile learning is a rapidly growing method of learning that utilizes mobile devices to deliver content. Acceptance of mobile learning theory was derived from technology acceptance theories. The study…

  6. What Do Contrast Threshold Equivalent Noise Studies Actually Measure? Noise vs. Nonlinearity in Different Masking Paradigms

    PubMed Central

    Baldwin, Alex S.; Baker, Daniel H.; Hess, Robert F.

    2016-01-01

    The internal noise present in a linear system can be quantified by the equivalent noise method. By measuring the effect that applying external noise to the system’s input has on its output one can estimate the variance of this internal noise. By applying this simple “linear amplifier” model to the human visual system, one can entirely explain an observer’s detection performance by a combination of the internal noise variance and their efficiency relative to an ideal observer. Studies using this method rely on two crucial factors: firstly that the external noise in their stimuli behaves like the visual system’s internal noise in the dimension of interest, and secondly that the assumptions underlying their model are correct (e.g. linearity). Here we explore the effects of these two factors while applying the equivalent noise method to investigate the contrast sensitivity function (CSF). We compare the results at 0.5 and 6 c/deg from the equivalent noise method against those we would expect based on pedestal masking data collected from the same observers. We find that the loss of sensitivity with increasing spatial frequency results from changes in the saturation constant of the gain control nonlinearity, and that this only masquerades as a change in internal noise under the equivalent noise method. Part of the effect we find can be attributed to the optical transfer function of the eye. The remainder can be explained by either changes in effective input gain, divisive suppression, or a combination of the two. Given these effects the efficiency of our observers approaches the ideal level. We show the importance of considering these factors in equivalent noise studies. PMID:26953796

  7. What Do Contrast Threshold Equivalent Noise Studies Actually Measure? Noise vs. Nonlinearity in Different Masking Paradigms.

    PubMed

    Baldwin, Alex S; Baker, Daniel H; Hess, Robert F

    2016-01-01

    The internal noise present in a linear system can be quantified by the equivalent noise method. By measuring the effect that applying external noise to the system's input has on its output one can estimate the variance of this internal noise. By applying this simple "linear amplifier" model to the human visual system, one can entirely explain an observer's detection performance by a combination of the internal noise variance and their efficiency relative to an ideal observer. Studies using this method rely on two crucial factors: firstly that the external noise in their stimuli behaves like the visual system's internal noise in the dimension of interest, and secondly that the assumptions underlying their model are correct (e.g. linearity). Here we explore the effects of these two factors while applying the equivalent noise method to investigate the contrast sensitivity function (CSF). We compare the results at 0.5 and 6 c/deg from the equivalent noise method against those we would expect based on pedestal masking data collected from the same observers. We find that the loss of sensitivity with increasing spatial frequency results from changes in the saturation constant of the gain control nonlinearity, and that this only masquerades as a change in internal noise under the equivalent noise method. Part of the effect we find can be attributed to the optical transfer function of the eye. The remainder can be explained by either changes in effective input gain, divisive suppression, or a combination of the two. Given these effects the efficiency of our observers approaches the ideal level. We show the importance of considering these factors in equivalent noise studies.

  8. High-κ TiO{sub 2} thin film prepared by sol-gel spin-coating method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kumar, Arvind; Mondal, Sandip; Rao, K. S. R. Koteswara, E-mail: ksrkrao@physics.iisc.ernet.in

    2015-06-24

    High-k TiO{sub 2} thin film on p-type silicon substrate was fabricated by a combined sol-gel and spin coating method. Thus deposited titania film had anatase phase with a small grain size of 16 nm and surface roughness of ≅ 0.6 nm. The oxide capacitance (C{sub ox}), flat band capacitance (C{sub FB}), flat band voltage (V{sub FB}), oxide trapped charge (Q{sub ot}), calculated from the high frequency (1 MHz) C-V curve were 0.47 nF, 0.16 nF, − 0.91 V, 4.7x10{sup −12} C, respectively. As compared to the previous reports, a high dielectric constant of 94 at 1 MHz frequency was observedmore » in the devices investigated here and an equivalent oxide thickness (EOT) was 4.1 nm. Dispersion in accumulation capacitance shows a linear relationship with AC frequencies. Leakage current density was found in acceptable limits (2.1e-5 A/cm{sup 2} for −1 V and 5.7e-7 A/cm{sup 2} for +1 V) for CMOS applications.« less

  9. [Energy requirements of petroleum workers in Western Siberia].

    PubMed

    Bondarev, G I; Vissarionova, V Ia; Dupik, V S; Zemlianskaia, T A

    1982-01-01

    Energy requirements of drillers, derrick mounters and maintenance workers belonging to dispersed collectives were defined on the basis of materials available at the oil field Surgutneft named for the 50th anniversary of October. Energy requirements of the team workers were studied by the method of Douglas-Haldane during autumn-winter in the course of performing various production processes. Energy requirements were established as regards the operations made in the course of the basic technological processes. The budget of the working time was calculated in accordance with a rate-qualification manual. Energy consumption during out-of-work time was established by the method of individual questionnaires, followed by energy consumption calculation during various types of the work according to the generally accepted energy equivalents. The daily energy consumption with regard to the eight-hour work was found to constitute 3100-3660 kcal for drillers and the first assistant drillers, and 3700-3900 kcal for the second and third assistant drillers. The oilmen were distributed into groups in terms of the work intensity: group II--drillers, first assistant drillers and maintenance workers; group III--the second and third assistant drillers, assistant maintenance workers, and derrick mounters.

  10. Detecting gait alterations due to concussion impairment with radar using information-theoretic techniques

    NASA Astrophysics Data System (ADS)

    Palmer, Jennifer; Bing, Kristin; Sharma, Amy; Greneker, Eugene; Selee, Teresa

    2011-06-01

    Several studies have shown that measuring changes in gait could provide an easier method of diagnosing and monitoring concussions. The purpose of this study was to measure radar signal returns to explore if differences in gait patterns between normal and "concussed" individuals could be identified from radar spectrogram data. Access to concussed individuals was not available during this feasibility study. Instead, based on research that demonstrated concussion impairment is equivalent to a blood alcohol content (BAC) of 0.05%, BAC impairment goggles were used to visually simulate a concussion. Both "impaired" and "not impaired" individuals were asked to complete only a motor skill task (walking) and then complete motor skill and cognitive skill (saying the months of the year in reverse order) tasks simultaneously. Results from the tests were analyzed using informationtheoretic (IT) techniques. IT algorithms were selected because of their potential to identify similarities and differences without having the requirement of a priori knowledge on an individual. To quantify results, two methods were incorporated: decision index, D(Q), analysis with receiver operating characteristic (ROC) curves and object-feature matrix clustering. Both techniques showed acceptable percent correctness in discriminating between normal and "impaired" individuals.

  11. SU-E-T-211: Comparison of Seven New TrueBeam Linacs with Enhanced Beam Data Conformance Using a Beam Comparison Software Tool

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Grzetic, S; Hessler, J; Gupta, N

    2015-06-15

    Purpose: To develop an independent software tool to assist in commissioning linacs with enhanced beam conformance, as well as perform ongoing QA for dosimetrically equivalent linacs. Methods: Linac manufacturers offer enhanced beam conformance as an option to allow for clinics to complete commissioning efficiently, as well as implement dosimetrically equivalent linacs. The specification for enhanced conformance includes PDD as well as profiles within 80% FWHM. Recently, we commissioned seven Varian TrueBeam linacs with enhanced beam conformance. We developed a software tool in Visual Basic to allow us to load the reference beam data and compare our beam data during commissioningmore » to evaluate enhanced beam conformance. This tool also allowed us to upload our beam data used for commissioning our dosimetrically equivalent beam models to compare and tweak each of our linac beams to match our modelled data in Varian’s Eclipse TPS. This tool will also be used during annual QA of the linacs to compare our beam data to our baseline data, as required by TG-142. Results: Our software tool was used to check beam conformance for seven TrueBeam linacs that we commissioned in the past six months. Using our tool we found that the factory conformed linacs showed up to 3.82% difference in their beam profile data upon installation. Using our beam comparison tool, we were able to adjust the energy and profiles of our beams to accomplish a better than 1.00% point by point data conformance. Conclusion: The availability of quantitative comparison tools is essential to accept and commission linacs with enhanced beam conformance, as well as to beam match multiple linacs. We further intend to use the same tool to ensure our beam data conforms to the commissioning beam data during our annual QA in keeping with the requirements of TG-142.« less

  12. TU-A-12A-01: Consistency of Lung Expansion and Contraction During Respiration: Implications for Quantitative Imaging

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Patton, T; Du, K; Bayouth, J

    Purpose: Four-dimensional computed tomography (4DCT) can be used to evaluate longitudinal changes in pulmonary function. The sensitivity of such measurements to identify function change may be improved with reproducible breathing patterns. The purpose of this study was to determine if inhale was more consistent than exhale, i.e., lung expansion during inhalation compared to lung contraction during exhalation. Methods: Repeat 4DCT image data acquired within a short time interval from 8 patients. Using a tissue volume preserving deformable image registration algorithm, Jacobian ventilation maps in two scanning sessions were computed and compared on the same coordinate for reproducibility analysis. Equivalent lungmore » volumes (ELV) were used for 5 subjects and equivalent title volumes (ETV) for the 3 subjects who experienced a baseline shift between scans. In addition, gamma pass rate was calculated from a modified gamma index evaluation between two ventilation maps, using acceptance criterions of 2mm distance-to-agreement and 5% ventilation difference. The gamma pass rates were then compared using paired t-test to determine if there was a significant difference. Results: Inhalation was more reproducible than exhalation. In the 5 ELV subjects 78.5% of the lung voxels met the gamma criteria for expansion during inhalation when comparing the two scans, while significantly fewer (70.9% of the lung voxels) met the gamma criteria for contraction during exhalation (p = .027). In the 8 total subjects analyzed the average gamma pass rate for expansion during inhalation was 75.2% while for contraction during exhalation it was 70.3%; which trended towards significant (p = .064). Conclusion: This work implies inhalation is more reproducible than exhalation, when equivalent respiratory volumes are considered. The reason for this difference is unknown. Longitudinal investigation of pulmonary function change based on inhalation images appears appropriate for Jacobian-based measure of lung tissue expansion. NIH Grant: R01 CA166703.« less

  13. Pulse-radiolysis studies on the interaction of one-electron reduced species with blue oxidases. Reduction of type-2-copper-depleted ascorbate oxidase.

    PubMed

    O'Neill, P; Fielden, E M; Avigliano, L; Marcozzi, G; Ballini, A; Agrò, F

    1984-08-15

    The interaction of one-electron reduced metronidazole (ArNO2.-) with native and Type-2-copper-depleted ascorbate oxidase were studied in buffered aqueous solution at pH 6.0 and 7.4 by using the technique of pulse radiolysis. With ArNO2.-, reduction of Type 1 copper of the native enzyme and of the Type-2-copper-depleted ascorbate oxidase occurs via a bimolecular step and at the same rate. Whereas the native protein accepts, in the absence of O2, 6-7 reducing equivalents, Type-2-copper-depleted ascorbate oxidase accepts only 3 reducing equivalents with stoichiometric reduction of Type 1 copper. On reaction of O2.- with ascorbate oxidase under conditions of [O2.-] much greater than [ascorbate oxidase], removal of Type 2 copper results in reduction of all the Type 1 copper atoms, in contrast with reduction of the equivalent of only one Type 1 copper atom in the holoprotein. From observations at 610 nm, the rate of reduction of ascorbate oxidase by O2.- is not dependent on the presence of Type 2 copper. For the holoprotein, no significant optical-absorption changes were observed at 330 nm. It is proposed that electrons enter the protein via Type 1 copper in a rate-determining step followed by a fast intramolecular transfer of electrons within the protein. For the Type-2-copper-depleted protein, intramolecular transfer within the protein, however, is slow or does not occur. In the presence of O2, it is also suggested that re-oxidation of the partially reduced holoprotein occurs at steady state, as inferred from the observations at 330 nm and 610 nm. The role of Type 2 copper in ascorbate oxidase is discussed in terms of its involvement in redistribution of electrons within the protein or structural considerations.

  14. Periodic solutions of second-order nonlinear difference equations containing a small parameter. II - Equivalent linearization

    NASA Technical Reports Server (NTRS)

    Mickens, R. E.

    1985-01-01

    The classical method of equivalent linearization is extended to a particular class of nonlinear difference equations. It is shown that the method can be used to obtain an approximation of the periodic solutions of these equations. In particular, the parameters of the limit cycle and the limit points can be determined. Three examples illustrating the method are presented.

  15. 33 CFR 151.2065 - Equivalent reporting methods for vessels other than those entering the Great Lakes or Hudson...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Zone or Canadian equivalent. For vessels required to report under § 151.2060(b)(3) of this subpart, the... methods of reporting if— (a) Such methods are at least as effective as those required by § 151.2060 of this subpart; and (b) Compliance with § 151.2060 of this subpart is economically or physically...

  16. 33 CFR 151.2065 - Equivalent reporting methods for vessels other than those entering the Great Lakes or Hudson...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Zone or Canadian equivalent. For vessels required to report under § 151.2060(b)(3) of this subpart, the... methods of reporting if— (a) Such methods are at least as effective as those required by § 151.2060 of this subpart; and (b) Compliance with § 151.2060 of this subpart is economically or physically...

  17. 33 CFR 151.2065 - Equivalent reporting methods for vessels other than those entering the Great Lakes or Hudson...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Zone or Canadian equivalent. For vessels required to report under § 151.2060(b)(3) of this subpart, the... methods of reporting if— (a) Such methods are at least as effective as those required by § 151.2060 of this subpart; and (b) Compliance with § 151.2060 of this subpart is economically or physically...

  18. Are bioequivalence studies of levothyroxine sodium formulations in euthyroid volunteers reliable?

    PubMed

    Blakesley, Vicky; Awni, Walid; Locke, Charles; Ludden, Thomas; Granneman, G Richard; Braverman, Lewis E

    2004-03-01

    Levothyroxine (LT4) has a narrow therapeutic index. Consequently, precise standards for assessing the bioequivalence of different LT4 products are vital. We examined the methodology that the Food and Drug Administration (FDA) recommends for comparing the bioavailability of LT4 products, as well as three modifications to correct for endogenous, thyroxine (T4) levels, to determine if the methodology could distinguish LT4 products that differ by 12.5%, 25%, or 33%. With no baseline correction for the endogenous T4 pool, differences in administered LT4 doses that differed by 25%-33% could not be detected (450 microg and 400 microg doses versus 600 microg dose, respectively). The three mathematical correction methods could distinguish the doses that differed by 25% and 33%. None of the correction methods could distinguish dosage strengths that differed by 12.5% (450 microg versus 400 microg). Dose differences within this range are known to result in clinically relevant differences in safety and effectiveness. Methods of analysis of bioequivalence data that do not consider endogenous T4 concentrations confound accurate quantitation and interpretation of LT4 bioavailability. As a result, products inappropriately deemed bioequivalent may put patients at risk for iatrogenic hyperthyroidism or hypothyroidism. More precise methods for defining bioequivalence are required in order to ensure that LT4 products accepted as bioequivalent will perform equivalently in patients without the need for further monitoring and retitration of their dose.

  19. A Phase II randomised controlled trial assessing the feasibility, acceptability and potential effectiveness of Dignity Therapy for older people in care homes: Study protocol

    PubMed Central

    Hall, Sue; Chochinov, Harvey; Harding, Richard; Murray, Scott; Richardson, Alison; Higginson, Irene J

    2009-01-01

    Background Although most older people living in nursing homes die there, there is a dearth of robust evaluations of interventions to improve their end-of-life care. Residents usually have multiple health problems making them heavily reliant on staff for their care, which can erode their sense of dignity. Dignity Therapy has been developed to help promote dignity and reduce distress. It comprises a recorded interview, which is transcribed, edited then returned to the patient, who can bequeath it to people of their choosing. Piloting has suggested that Dignity Therapy is beneficial to people dying of cancer and their families. The aims of this study are to assess the feasibility, acceptability and potential effectiveness of Dignity Therapy to reduce psychological and spiritual distress in older people reaching the end of life in care homes, and to pilot the methods for a Phase III RCT. Methods/design A randomised controlled open-label trial. Sixty-four residents of care homes for older people are randomly allocated to one of two groups: (i) Intervention (Dignity Therapy offered in addition to any standard care), and (ii) Control group (standard care). Recipients of the "generativity" documents are asked their views on taking part in the study and the therapy. Both quantitative and qualitative outcomes are assessed in face-to-face interviews at baseline and at approximately one and eight weeks after the intervention (equivalent in the control group). The primary outcome is residents' sense of dignity (potential effectiveness) assessed by the Patient Dignity Inventory. Secondary outcomes for residents include depression, hopefulness and quality of life. In view of the relatively small sample size, quantitative analysis is mainly descriptive. The qualitative analysis uses the Framework method. Discussion Dignity Therapy is brief, can be done at the bedside and could help both patients and their families. This detailed exploratory research shows if it is feasible to offer Dignity Therapy to residents of care homes, whether it is acceptable to them, their families and care home staff, if it is likely to be effective, and determine whether a Phase III RCT is desirable. Trial registration Current Controlled Clinical Trials: ISRCTN37589515 PMID:19317898

  20. Obtaining source current density related to irregularly structured electromagnetic target field inside human body using hybrid inverse/FDTD method.

    PubMed

    Han, Jijun; Yang, Deqiang; Sun, Houjun; Xin, Sherman Xuegang

    2017-01-01

    Inverse method is inherently suitable for calculating the distribution of source current density related with an irregularly structured electromagnetic target field. However, the present form of inverse method cannot calculate complex field-tissue interactions. A novel hybrid inverse/finite-difference time domain (FDTD) method that can calculate the complex field-tissue interactions for the inverse design of source current density related with an irregularly structured electromagnetic target field is proposed. A Huygens' equivalent surface is established as a bridge to combine the inverse and FDTD method. Distribution of the radiofrequency (RF) magnetic field on the Huygens' equivalent surface is obtained using the FDTD method by considering the complex field-tissue interactions within the human body model. The obtained magnetic field distributed on the Huygens' equivalent surface is regarded as the next target. The current density on the designated source surface is derived using the inverse method. The homogeneity of target magnetic field and specific energy absorption rate are calculated to verify the proposed method.

  1. Cross-Ethnicity Measurement Equivalence of Family Coping for Breast Cancer Survivors

    ERIC Educational Resources Information Center

    Lim, Jung-won; Townsend, Aloen

    2012-01-01

    Objective: The current study examines the equivalence of a measure of family coping, the Family Crisis Oriented Personal Evaluation scales (F-COPES), in Chinese American and Korean American breast cancer survivors (BCS). Methods: Factor structure and cross-ethnicity equivalence of the F-COPES were tested using structural equation modeling with 157…

  2. Active microwave water equivalence

    NASA Technical Reports Server (NTRS)

    Boyne, H. S.; Ellerbruch, D. A.

    1980-01-01

    Measurements of water equivalence using an active FM-CW microwave system were conducted over the past three years at various sites in Colorado, Wyoming, and California. The measurement method is described. Measurements of water equivalence and stratigraphy are compared with ground truth. A comparison of microwave, federal sampler, and snow pillow measurements at three sites in Colorado is described.

  3. Money for health: the equivalent variation of cardiovascular diseases.

    PubMed

    Groot, Wim; Van Den Brink, Henriëtte Maassen; Plug, Erik

    2004-09-01

    This paper introduces a new method to calculate the extent to which individuals are willing to trade money for improvements in their health status. An individual welfare function of income (WFI) is applied to calculate the equivalent income variation of health impairments. We believe that this approach avoids various drawbacks of alternative willingness-to-pay methods. The WFI is used to calculate the equivalent variation of cardiovascular diseases. It is found that for a 25 year old male the equivalent variation of a heart disease ranges from 114,000 euro to 380,000 euro depending on the welfare level. This is about 10,000 euro - 30,000 euro for an additional life year. The equivalent variation declines with age and is about the same for men and women. The estimates further vary by discount rate chosen. The estimates of the equivalent variation are generally higher than the money spent on most heart-related medical interventions per QALY. The cost-benefit analysis shows that for most interventions the value of the health benefits exceeds the costs. Heart transplants seem to be too costly and only beneficial if patients are young.

  4. New equivalent-electrical circuit model and a practical measurement method for human body impedance.

    PubMed

    Chinen, Koyu; Kinjo, Ichiko; Zamami, Aki; Irei, Kotoyo; Nagayama, Kanako

    2015-01-01

    Human body impedance analysis is an effective tool to extract electrical information from tissues in the human body. This paper presents a new measurement method of impedance using armpit electrode and a new equivalent circuit model for the human body. The lowest impedance was measured by using an LCR meter and six electrodes including armpit electrodes. The electrical equivalent circuit model for the cell consists of resistance R and capacitance C. The R represents electrical resistance of the liquid of the inside and outside of the cell, and the C represents high frequency conductance of the cell membrane. We propose an equivalent circuit model which consists of five parallel high frequency-passing CR circuits. The proposed equivalent circuit represents alpha distribution in the impedance measured at a lower frequency range due to ion current of the outside of the cell, and beta distribution at a high frequency range due to the cell membrane and the liquid inside cell. The calculated values by using the proposed equivalent circuit model were consistent with the measured values for the human body impedance.

  5. Finite element simulation and comparison of a shear strain and equivalent strain during ECAP and asymmetric rolling

    NASA Astrophysics Data System (ADS)

    Pesin, A.; Pustovoytov, D.; Shveyova, T.; Vafin, R.

    2017-12-01

    The level of a shear strain and equivalent strain plays a key role in terms of the possibility of using the asymmetric rolling process as a method of severe plastic deformation. Strain mode (pure shear or simple shear) can affect very strongly on the equivalent strain and the grain refinement of the material. This paper presents the results of FEM simulations and comparison of the equivalent strain in the aluminium alloy 5083 processed by a single-pass equal channel angular pressing (simple shear), symmetric rolling (pure shear) and asymmetric rolling (simultaneous pure and simple shear). The nonlinear effect of rolls speed ratio on the deformation characteristics during asymmetric rolling was found. Extremely high equivalent strain up to e=4.2 was reached during a single-pass asymmetric rolling. The influence of the shear strain on the level of equivalent strain is discussed. Finite element analysis of the deformation characteristics, presented in this study, can be used for optimization of the asymmetric rolling process as a method of severe plastic deformation.

  6. A Phase II randomised controlled trial assessing the feasibility, acceptability and potential effectiveness of dignity therapy for older people in care homes: study protocol.

    PubMed

    Hall, Sue; Chochinov, Harvey; Harding, Richard; Murray, Scott; Richardson, Alison; Higginson, Irene J

    2009-03-24

    Although most older people living in nursing homes die there, there is a dearth of robust evaluations of interventions to improve their end-of-life care. Residents usually have multiple health problems making them heavily reliant on staff for their care, which can erode their sense of dignity. Dignity Therapy has been developed to help promote dignity and reduce distress. It comprises a recorded interview, which is transcribed, edited then returned to the patient, who can bequeath it to people of their choosing. Piloting has suggested that Dignity Therapy is beneficial to people dying of cancer and their families. The aims of this study are to assess the feasibility, acceptability and potential effectiveness of Dignity Therapy to reduce psychological and spiritual distress in older people reaching the end of life in care homes, and to pilot the methods for a Phase III RCT. A randomised controlled open-label trial. Sixty-four residents of care homes for older people are randomly allocated to one of two groups: (i) Intervention (Dignity Therapy offered in addition to any standard care), and (ii) Control group (standard care). Recipients of the "generativity" documents are asked their views on taking part in the study and the therapy. Both quantitative and qualitative outcomes are assessed in face-to-face interviews at baseline and at approximately one and eight weeks after the intervention (equivalent in the control group). The primary outcome is residents' sense of dignity (potential effectiveness) assessed by the Patient Dignity Inventory. Secondary outcomes for residents include depression, hopefulness and quality of life. In view of the relatively small sample size, quantitative analysis is mainly descriptive. The qualitative analysis uses the Framework method. Dignity Therapy is brief, can be done at the bedside and could help both patients and their families. This detailed exploratory research shows if it is feasible to offer Dignity Therapy to residents of care homes, whether it is acceptable to them, their families and care home staff, if it is likely to be effective, and determine whether a Phase III RCT is desirable. Current Controlled Clinical Trials: ISRCTN37589515.

  7. Quality assessment for VMAT prostate radiotherapy planning based on data envelopment analysis

    NASA Astrophysics Data System (ADS)

    Lin, Kuan-Min; Simpson, John; Sasso, Giuseppe; Raith, Andrea; Ehrgott, Matthias

    2013-08-01

    The majority of commercial radiotherapy treatment planning systems requires planners to iteratively adjust the plan parameters in order to find a satisfactory plan. This iterative trial-and-error nature of radiotherapy treatment planning results in an inefficient planning process and in order to reduce such inefficiency, plans can be accepted without achieving the best attainable quality. We propose a quality assessment method based on data envelopment analysis (DEA) to address this inefficiency. This method compares a plan of interest to a set of past delivered plans and searches for evidence of potential further improvement. With the assistance of DEA, planners will be able to make informed decisions on whether further planning is required and ensure that a plan is only accepted when the plan quality is close to the best attainable one. We apply the DEA method to 37 prostate plans using two assessment parameters: rectal generalized equivalent uniform dose (gEUD) as the input and D95 (the minimum dose that is received by 95% volume of a structure) of the planning target volume (PTV) as the output. The percentage volume of rectum overlapping PTV is used to account for anatomical variations between patients and is included in the model as a non-discretionary output variable. Five plans that are considered of lesser quality by DEA are re-optimized with the goal to further improve rectal sparing. After re-optimization, all five plans improve in rectal gEUD without clinically considerable deterioration of the PTV D95 value. For the five re-optimized plans, the rectal gEUD is reduced by an average of 1.84 Gray (Gy) with only an average reduction of 0.07 Gy in PTV D95. The results demonstrate that DEA can correctly identify plans with potential improvements in terms of the chosen input and outputs.

  8. The Equivalence of the Radial Return and Mendelson Methods for Integrating the Classical Plasticity Equations

    NASA Technical Reports Server (NTRS)

    Bednarcyk, Brett A.; Aboudi, Jacob; Arnold, Steven M.

    2006-01-01

    The radial return and Mendelson methods for integrating the equations of classical plasticity, which appear independently in the literature, are shown to be identical. Both methods are presented in detail as are the specifics of their algorithmic implementation. Results illustrate the methods' equivalence across a range of conditions and address the question of when the methods require iteration in order for the plastic state to remain on the yield surface. FORTRAN code implementations of the radial return and Mendelson methods are provided in the appendix.

  9. 40 CFR 53.3 - General requirements for an equivalent method determination.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... other tests, full wind-tunnel tests similar to those described in § 53.62, or to special tests adapted... 40 Protection of Environment 6 2012-07-01 2012-07-01 false General requirements for an equivalent method determination. 53.3 Section 53.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  10. 40 CFR 53.3 - General requirements for an equivalent method determination.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... other tests, full wind-tunnel tests similar to those described in § 53.62, or to special tests adapted... 40 Protection of Environment 5 2011-07-01 2011-07-01 false General requirements for an equivalent method determination. 53.3 Section 53.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  11. 40 CFR 53.3 - General requirements for an equivalent method determination.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... other tests, full wind-tunnel tests similar to those described in § 53.62, or to special tests adapted... 40 Protection of Environment 6 2014-07-01 2014-07-01 false General requirements for an equivalent method determination. 53.3 Section 53.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  12. 40 CFR 53.3 - General requirements for an equivalent method determination.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... other tests, full wind-tunnel tests similar to those described in § 53.62, or to special tests adapted... 40 Protection of Environment 6 2013-07-01 2013-07-01 false General requirements for an equivalent method determination. 53.3 Section 53.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  13. Translation of the Marlowe-Crowne Social Desirability Scale into an Equivalent Spanish Version

    ERIC Educational Resources Information Center

    Collazo, Andres A.

    2005-01-01

    A Spanish version of the Marlowe-Crowne Social Desirability Scale (MCSDS) was developed by applying a method derived from the cross-cultural and psychometric literature. The method included five sequenced studies: (a) translation and back-translation, (b) comprehension assessment, (c) psychometric equivalence study of two mixed-language versions,…

  14. 29 CFR 1910.106 - Flammable liquids.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... by reference as specified in § 1910.6, or an equivalent test method as defined in Appendix B to... an equivalent method as defined by Appendix B to § 1910.1200—Physical Hazard Criteria, shall be used... this subparagraph. (15) Hotel shall mean buildings or groups of buildings under the same management in...

  15. Reconstruction of instantaneous surface normal velocity of a vibrating structure using interpolated time-domain equivalent source method

    NASA Astrophysics Data System (ADS)

    Geng, Lin; Bi, Chuan-Xing; Xie, Feng; Zhang, Xiao-Zheng

    2018-07-01

    Interpolated time-domain equivalent source method is extended to reconstruct the instantaneous surface normal velocity of a vibrating structure by using the time-evolving particle velocity as the input, which provides a non-contact way to overall understand the instantaneous vibration behavior of the structure. In this method, the time-evolving particle velocity in the near field is first modeled by a set of equivalent sources positioned inside the vibrating structure, and then the integrals of equivalent source strengths are solved by an iterative solving process and are further used to calculate the instantaneous surface normal velocity. An experiment of a semi-cylindrical steel plate impacted by a steel ball is investigated to examine the ability of the extended method, where the time-evolving normal particle velocity and pressure on the hologram surface measured by a Microflown pressure-velocity probe are used as the inputs of the extended method and the method based on pressure measurements, respectively, and the instantaneous surface normal velocity of the plate measured by a laser Doppler vibrometry is used as the reference for comparison. The experimental results demonstrate that the extended method is a powerful tool to visualize the instantaneous surface normal velocity of a vibrating structure in both time and space domains and can obtain more accurate results than that of the method based on pressure measurements.

  16. Adaptation of the CVT algorithm for catheter optimization in high dose rate brachytherapy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Poulin, Eric; Fekete, Charles-Antoine Collins; Beaulieu, Luc

    2013-11-15

    Purpose: An innovative, simple, and fast method to optimize the number and position of catheters is presented for prostate and breast high dose rate (HDR) brachytherapy, both for arbitrary templates or template-free implants (such as robotic templates).Methods: Eight clinical cases were chosen randomly from a bank of patients, previously treated in our clinic to test our method. The 2D Centroidal Voronoi Tessellations (CVT) algorithm was adapted to distribute catheters uniformly in space, within the maximum external contour of the planning target volume. The catheters optimization procedure includes the inverse planning simulated annealing algorithm (IPSA). Complete treatment plans can then bemore » generated from the algorithm for different number of catheters. The best plan is chosen from different dosimetry criteria and will automatically provide the number of catheters and their positions. After the CVT algorithm parameters were optimized for speed and dosimetric results, it was validated against prostate clinical cases, using clinically relevant dose parameters. The robustness to implantation error was also evaluated. Finally, the efficiency of the method was tested in breast interstitial HDR brachytherapy cases.Results: The effect of the number and locations of the catheters on prostate cancer patients was studied. Treatment plans with a better or equivalent dose distributions could be obtained with fewer catheters. A better or equal prostate V100 was obtained down to 12 catheters. Plans with nine or less catheters would not be clinically acceptable in terms of prostate V100 and D90. Implantation errors up to 3 mm were acceptable since no statistical difference was found when compared to 0 mm error (p > 0.05). No significant difference in dosimetric indices was observed for the different combination of parameters within the CVT algorithm. A linear relation was found between the number of random points and the optimization time of the CVT algorithm. Because the computation time decrease with the number of points and that no effects were observed on the dosimetric indices when varying the number of sampling points and the number of iterations, they were respectively fixed to 2500 and to 100. The computation time to obtain ten complete treatments plans ranging from 9 to 18 catheters, with the corresponding dosimetric indices, was 90 s. However, 93% of the computation time is used by a research version of IPSA. For the breast, on average, the Radiation Therapy Oncology Group recommendations would be satisfied down to 12 catheters. Plans with nine or less catheters would not be clinically acceptable in terms of V100, dose homogeneity index, and D90.Conclusions: The authors have devised a simple, fast and efficient method to optimize the number and position of catheters in interstitial HDR brachytherapy. The method was shown to be robust for both prostate and breast HDR brachytherapy. More importantly, the computation time of the algorithm is acceptable for clinical use. Ultimately, this catheter optimization algorithm could be coupled with a 3D ultrasound system to allow real-time guidance and planning in HDR brachytherapy.« less

  17. Assessment of physician and patient (child and adult) equivalent doses during renal angiography by Monte Carlo method.

    PubMed

    Karimian, A; Nikparvar, B; Jabbari, I

    2014-11-01

    Renal angiography is one of the medical imaging methods in which patient and physician receive high equivalent doses due to long duration of fluoroscopy. In this research, equivalent doses of some radiosensitive tissues of patient (adult and child) and physician during renal angiography have been calculated by using adult and child Oak Ridge National Laboratory phantoms and Monte Carlo method (MCNPX). The results showed, in angiography of right kidney in a child and adult patient, that gall bladder with the amounts of 2.32 and 0.35 mSv, respectively, has received the most equivalent dose. About the physician, left hand, left eye and thymus absorbed the most amounts of doses, means 0.020 mSv. In addition, equivalent doses of the physician's lens eye, thyroid and knees were 0.023, 0.007 and 7.9E-4 mSv, respectively. Although these values are less than the reported thresholds by ICRP 103, it should be noted that these amounts are related to one examination. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Economic and ecological outcomes of flexible biodiversity offset systems.

    PubMed

    Habib, Thomas J; Farr, Daniel R; Schneider, Richard R; Boutin, Stan

    2013-12-01

    The commonly expressed goal of biodiversity offsets is to achieve no net loss of specific biological features affected by development. However, strict equivalency requirements may complicate trading of offset credits, increase costs due to restricted offset placement options, and force offset activities to focus on features that may not represent regional conservation priorities. Using the oil sands industry of Alberta, Canada, as a case study, we evaluated the economic and ecological performance of alternative offset systems targeting either ecologically equivalent areas (vegetation types) or regional conservation priorities (caribou and the Dry Mixedwood natural subregion). Exchanging dissimilar biodiversity elements requires assessment via a generalized metric; we used an empirically derived index of biodiversity intactness to link offsets with losses incurred by development. We considered 2 offset activities: land protection, with costs estimated as the net present value of profits of petroleum and timber resources to be paid as compensation to resource tenure holders, and restoration of anthropogenic footprint, with costs estimated from existing restoration projects. We used the spatial optimization tool MARXAN to develop hypothetical offset networks that met either the equivalent-vegetation or conservation-priority targets. Networks that required offsetting equivalent vegetation cost 2-17 times more than priority-focused networks. This finding calls into question the prudence of equivalency-based systems, particularly in relatively undeveloped jurisdictions, where conservation focuses on limiting and directing future losses. Priority-focused offsets may offer benefits to industry and environmental stakeholders by allowing for lower-cost conservation of valued ecological features and may invite discussion on what land-use trade-offs are acceptable when trading biodiversity via offsets. Resultados Económicos y Ecológicos de Sistemas de Compensación de Biodiversidad Flexible Habib et al. © 2013 Society for Conservation Biology.

  19. Missing data handling in non-inferiority and equivalence trials: A systematic review.

    PubMed

    Rabe, Brooke A; Day, Simon; Fiero, Mallorie H; Bell, Melanie L

    2018-05-25

    Non-inferiority (NI) and equivalence clinical trials test whether a new treatment is therapeutically no worse than, or equivalent to, an existing standard of care. Missing data in clinical trials have been shown to reduce statistical power and potentially bias estimates of effect size; however, in NI and equivalence trials, they present additional issues. For instance, they may decrease sensitivity to differences between treatment groups and bias toward the alternative hypothesis of NI (or equivalence). Our primary aim was to review the extent of and methods for handling missing data (model-based methods, single imputation, multiple imputation, complete case), the analysis sets used (Intention-To-Treat, Per-Protocol, or both), and whether sensitivity analyses were used to explore departures from assumptions about the missing data. We conducted a systematic review of NI and equivalence trials published between May 2015 and April 2016 by searching the PubMed database. Articles were reviewed primarily by 2 reviewers, with 6 articles reviewed by both reviewers to establish consensus. Of 109 selected articles, 93% reported some missing data in the primary outcome. Among those, 50% reported complete case analysis, and 28% reported single imputation approaches for handling missing data. Only 32% reported conducting analyses of both intention-to-treat and per-protocol populations. Only 11% conducted any sensitivity analyses to test assumptions with respect to missing data. Missing data are common in NI and equivalence trials, and they are often handled by methods which may bias estimates and lead to incorrect conclusions. Copyright © 2018 John Wiley & Sons, Ltd.

  20. Quantitative determination of radio-opacity: equivalence of digital and film X-ray systems.

    PubMed

    Nomoto, R; Mishima, A; Kobayashi, K; McCabe, J F; Darvell, B W; Watts, D C; Momoi, Y; Hirano, S

    2008-01-01

    To evaluate the equivalence of a digital X-ray system (DenOptix) to conventional X-ray film in terms of the measured radio-opacity of known filled-resin materials and the suitability of attenuation coefficient for radio-opacity determination. Discs of five thicknesses (0.5-2.5mm) and step-wedges of each of three composite materials of nominal aluminum-equivalence of 50%, 200% and 450% were used. X-ray images of a set of discs (or step-wedge), an aluminum step-wedge, and a lead block were taken at 65 kV and 10 mA at a focus-film distance of 400 mm for 0.15s and 1.6s using an X-ray film or imaging plate. Radio-opacity was determined as equivalent aluminum thickness and attenuation coefficient. The logarithm of the individual optical density or gray scale value, corrected for background, was plotted against thickness, and the attenuation coefficient determined from the slope. The method of ISO 4049 was used for equivalent aluminum thickness. The equivalent aluminum thickness method is not suitable for materials of low radio-opacity, while the attenuation coefficient method could be used for all without difficulty. The digital system gave attenuation coefficients of greater precision than did film, but the use of automatic gain control (AGC) distorted the outcome unusably. Attenuation coefficient is a more precise and generally applicable approach to the determination of radio-opacity. The digital system was equivalent to film but with less noise. The use of AGC is inappropriate for such determinations.

  1. Fast spacecraft adaptive attitude tracking control through immersion and invariance design

    NASA Astrophysics Data System (ADS)

    Wen, Haowei; Yue, Xiaokui; Li, Peng; Yuan, Jianping

    2017-10-01

    This paper presents a novel non-certainty-equivalence adaptive control method for the attitude tracking control problem of spacecraft with inertia uncertainties. The proposed immersion and invariance (I&I) based adaptation law provides a more direct and flexible approach to circumvent the limitations of the basic I&I method without employing any filter signal. By virtue of the adaptation high-gain equivalence property derived from the proposed adaptive method, the closed-loop adaptive system with a low adaptation gain could recover the high adaptation gain performance of the filter-based I&I method, and the resulting control torque demands during the initial transient has been significantly reduced. A special feature of this method is that the convergence of the parameter estimation error has been observably improved by utilizing an adaptation gain matrix instead of a single adaptation gain value. Numerical simulations are presented to highlight the various benefits of the proposed method compared with the certainty-equivalence-based control method and filter-based I&I control schemes.

  2. Resonance treatment using pin-based pointwise energy slowing-down method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Choi, Sooyoung, E-mail: csy0321@unist.ac.kr; Lee, Changho, E-mail: clee@anl.gov; Lee, Deokjung, E-mail: deokjung@unist.ac.kr

    A new resonance self-shielding method using a pointwise energy solution has been developed to overcome the drawbacks of the equivalence theory. The equivalence theory uses a crude resonance scattering source approximation, and assumes a spatially constant scattering source distribution inside a fuel pellet. These two assumptions cause a significant error, in that they overestimate the multi-group effective cross sections, especially for {sup 238}U. The new resonance self-shielding method solves pointwise energy slowing-down equations with a sub-divided fuel rod. The method adopts a shadowing effect correction factor and fictitious moderator material to model a realistic pointwise energy solution. The slowing-down solutionmore » is used to generate the multi-group cross section. With various light water reactor problems, it was demonstrated that the new resonance self-shielding method significantly improved accuracy in the reactor parameter calculation with no compromise in computation time, compared to the equivalence theory.« less

  3. On the equivalence of experimental B(E2) values determined by various techniques

    DOE PAGES

    Birch, M.; Pritychenko, B.; Singh, B.

    2016-06-30

    In this paper, we establish the equivalence of the various techniques for measuring B(E2) values using a statistical analysis. Data used in this work come from the recent compilation by B. Pritychenko et al. (2016). We consider only those nuclei for which the B(E2) values were measured by at least two different methods, with each method being independently performed at least twice. Our results indicate that most prevalent methods of measuring B(E2) values are equivalent, with some weak evidence that Doppler-shift attenuation method (DSAM) measurements may differ from Coulomb excitation (CE) and nuclear resonance fluorescence (NRF) measurements. However, such anmore » evidence appears to arise from discrepant DSAM measurements of the lifetimes for 60Ni and some Sn nuclei rather than a systematic deviation in the method itself.« less

  4. A sparse equivalent source method for near-field acoustic holography.

    PubMed

    Fernandez-Grande, Efren; Xenaki, Angeliki; Gerstoft, Peter

    2017-01-01

    This study examines a near-field acoustic holography method consisting of a sparse formulation of the equivalent source method, based on the compressive sensing (CS) framework. The method, denoted Compressive-Equivalent Source Method (C-ESM), encourages spatially sparse solutions (based on the superposition of few waves) that are accurate when the acoustic sources are spatially localized. The importance of obtaining a non-redundant representation, i.e., a sensing matrix with low column coherence, and the inherent ill-conditioning of near-field reconstruction problems is addressed. Numerical and experimental results on a classical guitar and on a highly reactive dipole-like source are presented. C-ESM is valid beyond the conventional sampling limits, making wide-band reconstruction possible. Spatially extended sources can also be addressed with C-ESM, although in this case the obtained solution does not recover the spatial extent of the source.

  5. Scanning system, infrared noise equivalent temperature difference: Measurement procedure

    NASA Technical Reports Server (NTRS)

    Cannon, J. B., Jr.

    1975-01-01

    A procedure is described for determining the noise equivalent difference temperature for infrared electro-optical instruments. The instrumentation required, proper measurements, and methods of calculation are included.

  6. Establishing Statistical Equivalence of Data from Different Sampling Approaches for Assessment of Bacterial Phenotypic Antimicrobial Resistance

    PubMed Central

    2018-01-01

    ABSTRACT To assess phenotypic bacterial antimicrobial resistance (AMR) in different strata (e.g., host populations, environmental areas, manure, or sewage effluents) for epidemiological purposes, isolates of target bacteria can be obtained from a stratum using various sample types. Also, different sample processing methods can be applied. The MIC of each target antimicrobial drug for each isolate is measured. Statistical equivalence testing of the MIC data for the isolates allows evaluation of whether different sample types or sample processing methods yield equivalent estimates of the bacterial antimicrobial susceptibility in the stratum. We demonstrate this approach on the antimicrobial susceptibility estimates for (i) nontyphoidal Salmonella spp. from ground or trimmed meat versus cecal content samples of cattle in processing plants in 2013-2014 and (ii) nontyphoidal Salmonella spp. from urine, fecal, and blood human samples in 2015 (U.S. National Antimicrobial Resistance Monitoring System data). We found that the sample types for cattle yielded nonequivalent susceptibility estimates for several antimicrobial drug classes and thus may gauge distinct subpopulations of salmonellae. The quinolone and fluoroquinolone susceptibility estimates for nontyphoidal salmonellae from human blood are nonequivalent to those from urine or feces, conjecturally due to the fluoroquinolone (ciprofloxacin) use to treat infections caused by nontyphoidal salmonellae. We also demonstrate statistical equivalence testing for comparing sample processing methods for fecal samples (culturing one versus multiple aliquots per sample) to assess AMR in fecal Escherichia coli. These methods yield equivalent results, except for tetracyclines. Importantly, statistical equivalence testing provides the MIC difference at which the data from two sample types or sample processing methods differ statistically. Data users (e.g., microbiologists and epidemiologists) may then interpret practical relevance of the difference. IMPORTANCE Bacterial antimicrobial resistance (AMR) needs to be assessed in different populations or strata for the purposes of surveillance and determination of the efficacy of interventions to halt AMR dissemination. To assess phenotypic antimicrobial susceptibility, isolates of target bacteria can be obtained from a stratum using different sample types or employing different sample processing methods in the laboratory. The MIC of each target antimicrobial drug for each of the isolates is measured, yielding the MIC distribution across the isolates from each sample type or sample processing method. We describe statistical equivalence testing for the MIC data for evaluating whether two sample types or sample processing methods yield equivalent estimates of the bacterial phenotypic antimicrobial susceptibility in the stratum. This includes estimating the MIC difference at which the data from the two approaches differ statistically. Data users (e.g., microbiologists, epidemiologists, and public health professionals) can then interpret whether that present difference is practically relevant. PMID:29475868

  7. Establishing Statistical Equivalence of Data from Different Sampling Approaches for Assessment of Bacterial Phenotypic Antimicrobial Resistance.

    PubMed

    Shakeri, Heman; Volkova, Victoriya; Wen, Xuesong; Deters, Andrea; Cull, Charley; Drouillard, James; Müller, Christian; Moradijamei, Behnaz; Jaberi-Douraki, Majid

    2018-05-01

    To assess phenotypic bacterial antimicrobial resistance (AMR) in different strata (e.g., host populations, environmental areas, manure, or sewage effluents) for epidemiological purposes, isolates of target bacteria can be obtained from a stratum using various sample types. Also, different sample processing methods can be applied. The MIC of each target antimicrobial drug for each isolate is measured. Statistical equivalence testing of the MIC data for the isolates allows evaluation of whether different sample types or sample processing methods yield equivalent estimates of the bacterial antimicrobial susceptibility in the stratum. We demonstrate this approach on the antimicrobial susceptibility estimates for (i) nontyphoidal Salmonella spp. from ground or trimmed meat versus cecal content samples of cattle in processing plants in 2013-2014 and (ii) nontyphoidal Salmonella spp. from urine, fecal, and blood human samples in 2015 (U.S. National Antimicrobial Resistance Monitoring System data). We found that the sample types for cattle yielded nonequivalent susceptibility estimates for several antimicrobial drug classes and thus may gauge distinct subpopulations of salmonellae. The quinolone and fluoroquinolone susceptibility estimates for nontyphoidal salmonellae from human blood are nonequivalent to those from urine or feces, conjecturally due to the fluoroquinolone (ciprofloxacin) use to treat infections caused by nontyphoidal salmonellae. We also demonstrate statistical equivalence testing for comparing sample processing methods for fecal samples (culturing one versus multiple aliquots per sample) to assess AMR in fecal Escherichia coli These methods yield equivalent results, except for tetracyclines. Importantly, statistical equivalence testing provides the MIC difference at which the data from two sample types or sample processing methods differ statistically. Data users (e.g., microbiologists and epidemiologists) may then interpret practical relevance of the difference. IMPORTANCE Bacterial antimicrobial resistance (AMR) needs to be assessed in different populations or strata for the purposes of surveillance and determination of the efficacy of interventions to halt AMR dissemination. To assess phenotypic antimicrobial susceptibility, isolates of target bacteria can be obtained from a stratum using different sample types or employing different sample processing methods in the laboratory. The MIC of each target antimicrobial drug for each of the isolates is measured, yielding the MIC distribution across the isolates from each sample type or sample processing method. We describe statistical equivalence testing for the MIC data for evaluating whether two sample types or sample processing methods yield equivalent estimates of the bacterial phenotypic antimicrobial susceptibility in the stratum. This includes estimating the MIC difference at which the data from the two approaches differ statistically. Data users (e.g., microbiologists, epidemiologists, and public health professionals) can then interpret whether that present difference is practically relevant. Copyright © 2018 Shakeri et al.

  8. Equivalence in Symbolic and Nonsymbolic Contexts: Benefits of Solving Problems with Manipulatives

    ERIC Educational Resources Information Center

    Sherman, Jody; Bisanz, Jeffrey

    2009-01-01

    Children's failure on equivalence problems (e.g., 5 + 4 = 7 + __) is believed to be the result of misunderstanding the equal sign and has been tested using symbolic problems (including "="). For Study 1 (N = 48), we designed a nonsymbolic method for presenting equivalence problems to determine whether Grade 2 children's difficulty is due…

  9. [The effect of composition and structure of radiological equivalent materials on radiological equivalent].

    PubMed

    Wang, Y; Lin, D; Fu, T

    1997-03-01

    Morphology of inorganic material powders before and after being treated by ultrafine crush was observed by transformite electron microscope. The length and diameter of granules were measured. Polymers inorganic material powders before and after being treated by ultrafine crush were used for preparing radiological equivalent materials. Blending compatibility of inorganic meterials with polymer materials was observed by scanning electron microscope. CT values of tissue equivalent materials were measured by X-ray CT. Distribution of inorganic materials was examined. The compactness of materials was determined by the water absorbed method. The elastic module of materials was measured by laser speckle interferementry method. The results showed that the inorganic material powders treated by the ultrafine crush blent well with polymer and the distribution of these powders in the polymer was homogeneous. The equivalent errors of linear attenuation coefficients and CT values of equivalent materials were small. Their elastic modules increased one order of magnitude from 6.028 x 10(2) kg/cm2 to 9.753 x 10(3) kg/cm2. In addition, the rod inorganic material powders having rod granule blent easily with polymer. The present study provides a theoretical guidance and experimental basis for the design and synthesis of radiological equivalent materials.

  10. WAVDRAG- ZERO-LIFT WAVE DRAG OF COMPLEX AIRCRAFT CONFIGURATIONS

    NASA Technical Reports Server (NTRS)

    Craidon, C. B.

    1994-01-01

    WAVDRAG calculates the supersonic zero-lift wave drag of complex aircraft configurations. The numerical model of an aircraft is used throughout the design process from concept to manufacturing. WAVDRAG incorporates extended geometric input capabilities to permit use of a more accurate mathematical model. With WAVDRAG, the engineer can define aircraft components as fusiform or nonfusiform in terms of non-intersecting contours in any direction or more traditional parallel contours. In addition, laterally asymmetric configurations can be simulated. The calculations in WAVDRAG are based on Whitcomb's area-rule computation of equivalent-bodies, with modifications for supersonic speed. Instead of using a single equivalent-body, WAVDRAG calculates a series of equivalent-bodies, one for each roll angle. The total aircraft configuration wave drag is the integrated average of the equivalent-body wave drags through the full roll range of 360 degrees. WAVDRAG currently accepts up to 30 user-defined components containing a maximum of 50 contours as geometric input. Each contour contains a maximum of 50 points. The Mach number, angle-of-attack, and coordinates of angle-of-attack rotation are also input. The program warns of any fusiform-body line segments having a slope larger than the Mach angle. WAVDRAG calculates total drag and the wave-drag coefficient of the specified aircraft configuration. WAVDRAG is written in FORTRAN 77 for batch execution and has been implemented on a CDC CYBER 170 series computer with a central memory requirement of approximately 63K (octal) of 60 bit words. This program was developed in 1983.

  11. Acceptability of Ecological Momentary Assessment among Young Men Who Have Sex with Men

    ERIC Educational Resources Information Center

    Duncan, Dustin T.; Kapadia, Farzana; Kirchner, Thomas R.; Goedel, William C.; Brady, William J.; Halkitis, Perry N.

    2017-01-01

    The study evaluated the acceptability of text message- and voice-based ecological momentary assessment (EMA) methods among a sample (N = 74) of young men who have sex with men (MSM). We assessed the acceptability of text message- and voice-based EMA methods. Almost all participants (96%) reported that they would be willing to accept texts on their…

  12. Translation, cross-cultural adaptation and psychometric properties of the Back Beliefs Questionnaire in Modern Standard Arabic.

    PubMed

    Maki, Dana; Rajab, Ebrahim; Watson, Paul J; Critchley, Duncan J

    2017-02-01

    Purpose To translate and cross-culturally adapt the Back Beliefs Questionnaire (BBQ) into modern standard Arabic and examine its validity, acceptability and reliability in Arabic-speaking patients with low back pain (LBP). Method The BBQ was forward, back-translated and reviewed by an expert committee. Seventeen bilingual patients completed Arabic and English BBQs. LBP patients (n = 199) completed the Arabic BBQ. Sixty-four repeated it a week later, and 151 completed the Arabic Fear-avoidance Beliefs Questionnaire (FABQ). Results The expert committee followed advice from the developers to maintain Arabic equivalence of "back trouble(s)". Patients found the questionnaire comprehensible and acceptable. Agreement between the English and Arabic versions of the BBQ was acceptable, ICC =  0.65 (0.25-0.86). Most item-by-item agreement ranged from fair to moderate (K = 0.12-0.54). Mean (SD) of BBQ, FABQ total, work and physical activity subscales were 25.31(6.13), 44.76(19.49), 21.17(10.10) and 13.95(6.65). The BBQ correlated with the FABQ at r = -0.33, work subscale r = -0.29 and physical activity r = -0.30 (all p < 0.01). Cronbach's α = 0.73 indicated high internal consistency. Test-retest reliability was high, ICC = 0.80 (0.68-0.87). Item-by-item agreement ranged from fair to acceptable (K = 0.31-0.66). Conclusions The Arabic BBQ has good comprehensibility and acceptability, acceptable agreement with the English BBQ, high internal consistency and test-retest reliability. We recommend its use with Arabic-speaking LBP patient to determine their beliefs and attitudes about their back pain, as they have been shown to be important predictors of persistent LBP disability. Implications for Rehabilitation There are limited valid and reliable outcome measures for back pain in Arabic. The Back Beliefs Questionnaire (BBQ) is a tool that measures attitudes and beliefs about back pain. We recommend the use of our valid and reliable, translated and cross-culturally adapted tool with Arabic-speaking patients. The tool can measure attitudes and beliefs concerning the future consequences of LBP, with regards to recovery and return to work in this sample. Findings will improve back pain management options aimed at reducing back pain disability though challenging and modifying beliefs in the Middle East or with migrant populations in the West.

  13. Reliability and validity of quantifying absolute muscle hardness using ultrasound elastography.

    PubMed

    Chino, Kentaro; Akagi, Ryota; Dohi, Michiko; Fukashiro, Senshi; Takahashi, Hideyuki

    2012-01-01

    Muscle hardness is a mechanical property that represents transverse muscle stiffness. A quantitative method that uses ultrasound elastography for quantifying absolute human muscle hardness has been previously devised; however, its reliability and validity have not been completely verified. This study aimed to verify the reliability and validity of this quantitative method. The Young's moduli of seven tissue-mimicking materials (in vitro; Young's modulus range, 20-80 kPa; increments of 10 kPa) and the human medial gastrocnemius muscle (in vivo) were quantified using ultrasound elastography. On the basis of the strain/Young's modulus ratio of two reference materials, one hard and one soft (Young's moduli of 7 and 30 kPa, respectively), the Young's moduli of the tissue-mimicking materials and medial gastrocnemius muscle were calculated. The intra- and inter-investigator reliability of the method was confirmed on the basis of acceptably low coefficient of variations (≤6.9%) and substantially high intraclass correlation coefficients (≥0.77) obtained from all measurements. The correlation coefficient between the Young's moduli of the tissue-mimicking materials obtained using a mechanical method and ultrasound elastography was 0.996, which was equivalent to values previously obtained using magnetic resonance elastography. The Young's moduli of the medial gastrocnemius muscle obtained using ultrasound elastography were within the range of values previously obtained using magnetic resonance elastography. The reliability and validity of the quantitative method for measuring absolute muscle hardness using ultrasound elastography were thus verified.

  14. Reliability and Validity of Quantifying Absolute Muscle Hardness Using Ultrasound Elastography

    PubMed Central

    Chino, Kentaro; Akagi, Ryota; Dohi, Michiko; Fukashiro, Senshi; Takahashi, Hideyuki

    2012-01-01

    Muscle hardness is a mechanical property that represents transverse muscle stiffness. A quantitative method that uses ultrasound elastography for quantifying absolute human muscle hardness has been previously devised; however, its reliability and validity have not been completely verified. This study aimed to verify the reliability and validity of this quantitative method. The Young’s moduli of seven tissue-mimicking materials (in vitro; Young’s modulus range, 20–80 kPa; increments of 10 kPa) and the human medial gastrocnemius muscle (in vivo) were quantified using ultrasound elastography. On the basis of the strain/Young’s modulus ratio of two reference materials, one hard and one soft (Young’s moduli of 7 and 30 kPa, respectively), the Young’s moduli of the tissue-mimicking materials and medial gastrocnemius muscle were calculated. The intra- and inter-investigator reliability of the method was confirmed on the basis of acceptably low coefficient of variations (≤6.9%) and substantially high intraclass correlation coefficients (≥0.77) obtained from all measurements. The correlation coefficient between the Young’s moduli of the tissue-mimicking materials obtained using a mechanical method and ultrasound elastography was 0.996, which was equivalent to values previously obtained using magnetic resonance elastography. The Young’s moduli of the medial gastrocnemius muscle obtained using ultrasound elastography were within the range of values previously obtained using magnetic resonance elastography. The reliability and validity of the quantitative method for measuring absolute muscle hardness using ultrasound elastography were thus verified. PMID:23029231

  15. [Comparison between rapid detection method of enzyme substrate technique and multiple-tube fermentation technique in water coliform bacteria detection].

    PubMed

    Sun, Zong-ke; Wu, Rong; Ding, Pei; Xue, Jin-Rong

    2006-07-01

    To compare between rapid detection method of enzyme substrate technique and multiple-tube fermentation technique in water coliform bacteria detection. Using inoculated and real water samples to compare the equivalence and false positive rate between two methods. Results demonstrate that enzyme substrate technique shows equivalence with multiple-tube fermentation technique (P = 0.059), false positive rate between the two methods has no statistical difference. It is suggested that enzyme substrate technique can be used as a standard method for water microbiological safety evaluation.

  16. External jugular venous pressure as an alternative to conventional central venous pressure in right lobe donor hepatectomies.

    PubMed

    Abdullah, Mohamed Hussein; Soliman, Hossam El Deen; Morad, Wessam Saber

    2011-12-01

    Many centers have adopted central vein cannulation both for central venous pressure monitoring and fluid administration for right hepatectomy in living-liver donors. However, use of central venous catheters is associated with adverse events that are hazardous to patients and expensive to treat. This study sought to examine the use of external jugular venous pressure as an alternative to conventional central venous pressure in right lobe donor hepatectomies Forty ASA grade I adult living liver-donors without a known history of significant cardiac or pulmonary diseases were enrolled in this prospective observational study. Paired measurement of venous pressures (external jugular venous pressure and internal jugular venous pressure) were taken at the following times: after induction of anesthesia, 30 minutes after skin incision, during right lobe mobilization (every 15 minutes), during hepatic transaction (every 15 minutes), after right lobe resection (every 15 minutes), and after abdominal closure. Paired measurements were equal in 47.5%, 53.5%, 61.5%, 46.3%, and 52.5% for after induction, after skin incision, right lobe mobilization, right lobe transection, after resection, and before abdominal closure periods. However, all measurements were within acceptable limits of bias measurements (± 2 mm Hg). Central venous pressure catheter placement can be avoided and replaced by a less-invasive method such as external jugular venous pressure (which gave an acceptable estimate of central venous pressure in all phases of right lobe resection) in living-donor liver transplant and allowed equivalent monitor even during fluid restriction phases.

  17. A Comparison of Measurement Equivalence Methods Based on Confirmatory Factor Analysis and Item Response Theory.

    ERIC Educational Resources Information Center

    Flowers, Claudia P.; Raju, Nambury S.; Oshima, T. C.

    Current interest in the assessment of measurement equivalence emphasizes two methods of analysis, linear, and nonlinear procedures. This study simulated data using the graded response model to examine the performance of linear (confirmatory factor analysis or CFA) and nonlinear (item-response-theory-based differential item function or IRT-Based…

  18. A comparison of confidence interval methods for the concordance correlation coefficient and intraclass correlation coefficient with small number of raters.

    PubMed

    Feng, Dai; Svetnik, Vladimir; Coimbra, Alexandre; Baumgartner, Richard

    2014-01-01

    The intraclass correlation coefficient (ICC) with fixed raters or, equivalently, the concordance correlation coefficient (CCC) for continuous outcomes is a widely accepted aggregate index of agreement in settings with small number of raters. Quantifying the precision of the CCC by constructing its confidence interval (CI) is important in early drug development applications, in particular in qualification of biomarker platforms. In recent years, there have been several new methods proposed for construction of CIs for the CCC, but their comprehensive comparison has not been attempted. The methods consisted of the delta method and jackknifing with and without Fisher's Z-transformation, respectively, and Bayesian methods with vague priors. In this study, we carried out a simulation study, with data simulated from multivariate normal as well as heavier tailed distribution (t-distribution with 5 degrees of freedom), to compare the state-of-the-art methods for assigning CI to the CCC. When the data are normally distributed, the jackknifing with Fisher's Z-transformation (JZ) tended to provide superior coverage and the difference between it and the closest competitor, the Bayesian method with the Jeffreys prior was in general minimal. For the nonnormal data, the jackknife methods, especially the JZ method, provided the coverage probabilities closest to the nominal in contrast to the others which yielded overly liberal coverage. Approaches based upon the delta method and Bayesian method with conjugate prior generally provided slightly narrower intervals and larger lower bounds than others, though this was offset by their poor coverage. Finally, we illustrated the utility of the CIs for the CCC in an example of a wake after sleep onset (WASO) biomarker, which is frequently used in clinical sleep studies of drugs for treatment of insomnia.

  19. Unstable optical resonator loss calculations using the prony method.

    PubMed

    Siegman, A E; Miller, H Y

    1970-12-01

    The eigenvalues for all the significant low-order resonant modes of an unstable optical resonator with circular mirrors are computed using an eigenvalue method called the Prony method. A general equivalence relation is also given, by means of which one can obtain the design parameters for a single-ended unstable resonator of the type usually employed in practical lasers, from the calculated or tabulated values for an equivalent symmetric or double-ended unstable resonator.

  20. A method of Modelling and Simulating the Back-to-Back Modular Multilevel Converter HVDC Transmission System

    NASA Astrophysics Data System (ADS)

    Wang, Lei; Fan, Youping; Zhang, Dai; Ge, Mengxin; Zou, Xianbin; Li, Jingjiao

    2017-09-01

    This paper proposes a method to simulate a back-to-back modular multilevel converter (MMC) HVDC transmission system. In this paper we utilize an equivalent networks to simulate the dynamic power system. Moreover, to account for the performance of converter station, core components of model of the converter station gives a basic model of simulation. The proposed method is applied to an equivalent real power system.

  1. Parametric Study of Pulse-Combustor-Driven Ejectors at High-Pressure

    NASA Technical Reports Server (NTRS)

    Yungster, Shaye; Paxson, Daniel E.; Perkins, Hugh D.

    2015-01-01

    Pulse-combustor configurations developed in recent studies have demonstrated performance levels at high-pressure operating conditions comparable to those observed at atmospheric conditions. However, problems related to the way fuel was being distributed within the pulse combustor were still limiting performance. In the first part of this study, new configurations are investigated computationally aimed at improving the fuel distribution and performance of the pulse-combustor. Subsequent sections investigate the performance of various pulse-combustor driven ejector configurations operating at highpressure conditions, focusing on the effects of fuel equivalence ratio and ejector throat area. The goal is to design pulse-combustor-ejector configurations that maximize pressure gain while achieving a thermal environment acceptable to a turbine, and at the same time maintain acceptable levels of NOx emissions and flow non-uniformities. The computations presented here have demonstrated pressure gains of up to 2.8%.

  2. Parametric Study of Pulse-Combustor-Driven Ejectors at High-Pressure

    NASA Technical Reports Server (NTRS)

    Yungster, Shaye; Paxson, Daniel E.; Perkins, Hugh D.

    2015-01-01

    Pulse-combustor configurations developed in recent studies have demonstrated performance levels at high-pressure operating conditions comparable to those observed at atmospheric conditions. However, problems related to the way fuel was being distributed within the pulse combustor were still limiting performance. In the first part of this study, new configurations are investigated computationally aimed at improving the fuel distribution and performance of the pulse-combustor. Subsequent sections investigate the performance of various pulse-combustor driven ejector configurations operating at high pressure conditions, focusing on the effects of fuel equivalence ratio and ejector throat area. The goal is to design pulse-combustor-ejector configurations that maximize pressure gain while achieving a thermal environment acceptable to a turbine, and at the same time maintain acceptable levels of NO(x) emissions and flow non-uniformities. The computations presented here have demonstrated pressure gains of up to 2.8.

  3. Is whistleblowing now mandatory? The impact of mandatory reporting law on trust relationships in health care.

    PubMed

    Hewitt, Jayne

    2013-09-01

    Trust is vital for promoting positive health care relationships aimed at achieving positive patient outcomes. Patients, as well as the broader society, trust that health care practitioners who have been granted authority by the state to provide safe and beneficial health care are competent to do so. Recent instances where patients have been harmed as the result of treatment that fell below the accepted standard of competence have negatively impacted on trust. As the state has a responsibility to protect the public from this type of harm, legislation that mandates reporting of certain instances where the behaviour of health care professionals has fallen below the acceptable standard has been introduced. While this may have been designed to restore public trust, this article argues that it has the potential to diminish trust on the basis that mandatory reporting may be equivalent to mandatory whistleblowing.

  4. Evaluation of Nurses' Acceptance of Screen Display Methods with Temporarily Non-Display for Privacy Protection.

    PubMed

    Niimi, Yukari; Ota, Katsumasa; Ikegami, Chikako

    2018-01-01

    The purpose of this study was to explore nurses' acceptance of a screen display method that temporarily hides patient information for privacy protection. Using a questionnaire, we asked nurses to evaluate the display method from the viewpoints of safety and efficiency with respect to 22 personal information items. The nurses were favorably interested in introducing the display method into their hospital system; however, their acceptance varied.

  5. Impact of Sample Size and Variability on the Power and Type I Error Rates of Equivalence Tests: A Simulation Study

    ERIC Educational Resources Information Center

    Rusticus, Shayna A.; Lovato, Chris Y.

    2014-01-01

    The question of equivalence between two or more groups is frequently of interest to many applied researchers. Equivalence testing is a statistical method designed to provide evidence that groups are comparable by demonstrating that the mean differences found between groups are small enough that they are considered practically unimportant. Few…

  6. On the Equivalence of the Summation and Transfer-Matrix Methods in Wave Propagation through Multilayers of Lossless and Lossy Media

    ERIC Educational Resources Information Center

    Pereyra, Pedro; Robledo-Martinez, Arturo

    2009-01-01

    We explicitly show that the well-known transmission and reflection amplitudes of planar slabs, obtained via an algebraic summation of Fresnel amplitudes, are completely equivalent to those obtained from transfer matrices in the scattering approach. This equivalence makes the finite periodic systems theory a powerful alternative to the cumbersome…

  7. Non-Aqueous Titration Method for Determining Suppressor Concentration in the MCU Next Generation Solvent (NGS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Taylor-Pashow, Kathryn M. L.; Jones, Daniel H.

    A non-aqueous titration method has been used for quantifying the suppressor concentration in the MCU solvent hold tank (SHT) monthly samples since the Next Generation Solvent (NGS) was implemented in 2013. The titration method measures the concentration of the NGS suppressor (TiDG) as well as the residual tri-n-octylamine (TOA) that is a carryover from the previous solvent. As the TOA concentration has decreased over time, it has become difficult to resolve the TiDG equivalence point as the TOA equivalence point has moved closer. In recent samples, the TiDG equivalence point could not be resolved, and therefore, the TiDG concentration wasmore » determined by subtracting the TOA concentration as measured by semi-volatile organic analysis (SVOA) from the total base concentration as measured by titration. In order to improve the titration method so that the TiDG concentration can be measured directly, without the need for the SVOA data, a new method has been developed that involves spiking of the sample with additional TOA to further separate the two equivalence points in the titration. This method has been demonstrated on four recent SHT samples and comparison to results obtained using the SVOA TOA subtraction method shows good agreement. Therefore, it is recommended that the titration procedure be revised to include the TOA spike addition, and this to become the primary method for quantifying the TiDG.« less

  8. A method for determining the weak statistical stationarity of a random process

    NASA Technical Reports Server (NTRS)

    Sadeh, W. Z.; Koper, C. A., Jr.

    1978-01-01

    A method for determining the weak statistical stationarity of a random process is presented. The core of this testing procedure consists of generating an equivalent ensemble which approximates a true ensemble. Formation of an equivalent ensemble is accomplished through segmenting a sufficiently long time history of a random process into equal, finite, and statistically independent sample records. The weak statistical stationarity is ascertained based on the time invariance of the equivalent-ensemble averages. Comparison of these averages with their corresponding time averages over a single sample record leads to a heuristic estimate of the ergodicity of a random process. Specific variance tests are introduced for evaluating the statistical independence of the sample records, the time invariance of the equivalent-ensemble autocorrelations, and the ergodicity. Examination and substantiation of these procedures were conducted utilizing turbulent velocity signals.

  9. A Statistical Review of Alternative Zinc and Copper Extraction from Mineral Fertilizers and Industrial By-Products.

    PubMed

    Cenciani de Souza, Camila Prado; Aparecida de Abreu, Cleide; Coscione, Aline Renée; Alberto de Andrade, Cristiano; Teixeira, Luiz Antonio Junqueira; Consolini, Flavia

    2018-01-01

    Rapid, accurate, and low-cost alternative analytical methods for micronutrient quantification in fertilizers are fundamental in QC. The purpose of this study was to evaluate whether zinc (Zn) and copper (Cu) content in mineral fertilizers and industrial by-products determined by the alternative methods USEPA 3051a, 10% HCl, and 10% H2SO4 are statistically equivalent to the standard method, consisting of hot-plate digestion using concentrated HCl. The commercially marketed Zn and Cu sources in Brazil consisted of oxides, carbonate, and sulfate fertilizers and by-products consisting of galvanizing ash, galvanizing sludge, brass ash, and brass or scrap slag. The contents of sources ranged from 15 to 82% and 10 to 45%, respectively, for Zn and Cu. The Zn and Cu contents refer to the variation of the elements found in the different sources evaluated with the concentrated HCl method as shown in Table 1. A protocol based on the following criteria was used for the statistical analysis assessment of the methods: F-test modified by Graybill, t-test for the mean error, and linear correlation coefficient analysis. In terms of equivalents, 10% HCl extraction was equivalent to the standard method for Zn, and the results of the USEPA 3051a and 10% HCl methods indicated that these methods were equivalents for Cu. Therefore, these methods can be considered viable alternatives to the standard method of determination for Cu and Zn in mineral fertilizers and industrial by-products in future research for their complete validation.

  10. Measurement Properties of DIBELS Oral Reading Fluency in Grade 2: Implications for Equating Studies

    ERIC Educational Resources Information Center

    Stoolmiller, Michael; Biancarosa, Gina; Fien, Hank

    2013-01-01

    Lack of psychometric equivalence of oral reading fluency (ORF) passages used within a grade for screening and progress monitoring has recently become an issue with calls for the use of equating methods to ensure equivalence. To investigate the nature of the nonequivalence and to guide the choice of equating method to correct for nonequivalence,…

  11. Compilation of Pilot Cognitive Ability Norms

    DTIC Science & Technology

    2011-12-01

    2.1.1 Change in Performance Method. The first method is a pretest , posttest paradigm. It is the most reliable but requires prior, premorbid...elements of the person’s own performance to make conclusions regarding cognitive change. A common approach uses the effects of aging on various types of...Percentile Equivalence for IQ Scores on the MAB-II ............................................... 7 4 Percentile Equivalence for Verbal Subtest

  12. [Research on NIR equivalent spectral measurement].

    PubMed

    Wang, Zhi-Hong; Liu, Jie; Sun, Yu-Yang; Teng, Fei; Lin, Jun

    2013-04-01

    When the spectra of the diffuse reflectance of low reflectivity samples or the transmittance of low transmisivity samples are measured by a portable near infrared (NIR) spectrometer, because there is the noise of the spectrometer, the smaller the reflectance or transmittance of the sample, the lower its SNR. Even if treated by denoise methods, the spectra can not meet the requirement of NIR analysis. So the equivalent spectrum measure method was researched. Based on the intensity of the reflected or transmitted signal by the sample under the traditional measure conditions, the light current of the spectrometer was enlarged, and then the signal of the measured sample increased; the reflected or transmitted light of the measure reference was reduced to avoid the signal of the measure reference over range. Moreover the equivalent spectrum of the sample was calculated in order to make it identical with the spectrum measured by traditional method. Thus the NIR spectral SNR was improved. The results of theory analysis and experiments show that if the light signal of the spectrometer was properly increased according to the reflected or transmitted signal of the low reflectivity or transmisivity sample, the equivalent spectrum was the same as the spectrum measured by traditional method and its SNR was improved.

  13. Static and Vibration Analyses of General Wing Structures Using Equivalent Plate Models

    NASA Technical Reports Server (NTRS)

    Kapania, Rakesh K.; Liu, Youhua

    1999-01-01

    An efficient method, using equivalent plate model, is developed for studying the static and vibration analyses of general built-up wing structures composed of skins, spars, and ribs. The model includes the transverse shear effects by treating the built-up wing as a plate following the Reissner-Mindlin theory, the so-called First-order Shear Deformation Theory (FSDT). The Ritz method is used with the Legendre polynomials being employed as the trial functions. This is in contrast to previous equivalent plate model methods which have used simple polynomials, known to be prone to numerical ill-conditioning, as the trial functions. The present developments are evaluated by comparing the results with those obtained using MSC/NASTRAN, for a set of examples. These examples are: (i) free-vibration analysis of a clamped trapezoidal plate with (a) uniform thickness, and (b) non-uniform thickness varying as an airfoil, (ii) free-vibration and static analyses (including skin stress distribution) of a general built-up wing, and (iii) free-vibration and static analyses of a swept-back box wing. The results obtained by the present equivalent plate model are in good agreement with those obtained by the finite element method.

  14. Public acceptance of management methods under different human-wildlife conflict scenarios.

    PubMed

    Liordos, Vasilios; Kontsiotis, Vasileios J; Georgari, Marina; Baltzi, Kerasia; Baltzi, Ioanna

    2017-02-01

    Wildlife management seeks to minimise public controversy for successful application of wildlife control methods. Human dimensions research in wildlife seeks a better understanding of public preferences for effective human-wildlife conflict resolution. In face to face interviews, 630 adults in Greece were asked to rate on a 5-point Likert-like scale their acceptance of 3 management methods, i.e., do nothing, non-lethal control, and lethal control, in the context of 5 human-wildlife conflict scenarios: 1) corvids damage crops; 2) starlings damage crops; 3) starlings foul urban structures; 4) coypus damage crops; and 5) coypus transfer disease. Univariate GLMs determined occupation, hunting membership and their interaction as the stronger predictors of public acceptance, generating 4 stakeholder groups: the general public, farmers, hunters, and farmers-hunters. Differences in acceptance and consensus among stakeholder groups were assessed using the Potential for Conflict Index 2 (PCI 2 ). All 4 stakeholder groups agreed that doing nothing was unacceptable and non-lethal control acceptable in all 5 scenarios, with generally high consensus within and between groups. The lethal control method was more controversial and became increasingly more acceptable as the severity of scenarios was increased and between non-native and native species. Lethal control was unacceptable for the general public in all scenarios. Farmers accepted lethal methods in the corvids and starlings scenarios, were neutral in the coypus damage crops scenario, whereas they accepted lethal control when coypus transfer disease. Hunters' opinion was neutral in the corvids, starlings and coypus damage crops and starlings foul urban structures scenarios, but they accepted lethal methods in the coypus transfer disease scenario. Farmers-hunters considered lethal control acceptable in all 5 scenarios. Implications from this study could be used for designing a socio-ecological approach which incorporates wildlife management with public interests. The studied species have a wide distribution, therefore present findings might also prove useful elsewhere. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. A regret theory approach to decision curve analysis: A novel method for eliciting decision makers' preferences and decision-making

    PubMed Central

    2010-01-01

    Background Decision curve analysis (DCA) has been proposed as an alternative method for evaluation of diagnostic tests, prediction models, and molecular markers. However, DCA is based on expected utility theory, which has been routinely violated by decision makers. Decision-making is governed by intuition (system 1), and analytical, deliberative process (system 2), thus, rational decision-making should reflect both formal principles of rationality and intuition about good decisions. We use the cognitive emotion of regret to serve as a link between systems 1 and 2 and to reformulate DCA. Methods First, we analysed a classic decision tree describing three decision alternatives: treat, do not treat, and treat or no treat based on a predictive model. We then computed the expected regret for each of these alternatives as the difference between the utility of the action taken and the utility of the action that, in retrospect, should have been taken. For any pair of strategies, we measure the difference in net expected regret. Finally, we employ the concept of acceptable regret to identify the circumstances under which a potentially wrong strategy is tolerable to a decision-maker. Results We developed a novel dual visual analog scale to describe the relationship between regret associated with "omissions" (e.g. failure to treat) vs. "commissions" (e.g. treating unnecessary) and decision maker's preferences as expressed in terms of threshold probability. We then proved that the Net Expected Regret Difference, first presented in this paper, is equivalent to net benefits as described in the original DCA. Based on the concept of acceptable regret we identified the circumstances under which a decision maker tolerates a potentially wrong decision and expressed it in terms of probability of disease. Conclusions We present a novel method for eliciting decision maker's preferences and an alternative derivation of DCA based on regret theory. Our approach may be intuitively more appealing to a decision-maker, particularly in those clinical situations when the best management option is the one associated with the least amount of regret (e.g. diagnosis and treatment of advanced cancer, etc). PMID:20846413

  16. Automated design of genetic toggle switches with predetermined bistability.

    PubMed

    Chen, Shuobing; Zhang, Haoqian; Shi, Handuo; Ji, Weiyue; Feng, Jingchen; Gong, Yan; Yang, Zhenglin; Ouyang, Qi

    2012-07-20

    Synthetic biology aims to rationally construct biological devices with required functionalities. Methods that automate the design of genetic devices without post-hoc adjustment are therefore highly desired. Here we provide a method to predictably design genetic toggle switches with predetermined bistability. To accomplish this task, a biophysical model that links ribosome binding site (RBS) DNA sequence to toggle switch bistability was first developed by integrating a stochastic model with RBS design method. Then, to parametrize the model, a library of genetic toggle switch mutants was experimentally built, followed by establishing the equivalence between RBS DNA sequences and switch bistability. To test this equivalence, RBS nucleotide sequences for different specified bistabilities were in silico designed and experimentally verified. Results show that the deciphered equivalence is highly predictive for the toggle switch design with predetermined bistability. This method can be generalized to quantitative design of other probabilistic genetic devices in synthetic biology.

  17. Forecasting petroleum discoveries in sparsely drilled areas: Nigeria and the North Sea

    USGS Publications Warehouse

    Attanasi, E.D.; Root, D.H.

    1988-01-01

    Decline function methods for projecting future discoveries generally capture the crowding effects of wildcat wells on the discovery rate. However, these methods do not accommodate easily situations where exploration areas and horizons are expanding. In this paper, a method is presented that uses a mapping algorithm for separating these often countervailing influences. The method is applied to Nigeria and the North Sea. For an amount of future drilling equivalent to past drilling (825 wildcat wells), future discoveries (in resources found) for Nigeria are expected to decline by 68% per well but still amount to 8.5 billion barrels of oil equivalent (BOE). Similarly, for the total North Sea for an equivalent amount and mix among areas of past drilling (1322 wildcat wells), future discoveries are expected to amount to 17.9 billion BOE, whereas the average discovery rate per well is expected to decline by 71%. ?? 1988 International Association for Mathematical Geology.

  18. Behavioral Economics of Cigarette Purchase Tasks: Within-Subject Comparison of Real, Potentially Real, and Hypothetical Cigarettes

    PubMed Central

    Wilson, A. George; Franck, Christopher T.; Koffarnus, Mikhail N.

    2016-01-01

    Abstract Introduction: Hypothetical rewards are commonly used in studies of laboratory-based tobacco demand. However, behavioral economic demand procedures require confirmation that the behavior elicited from real and hypothetical reward types are equivalent, and that results attained from these procedures are comparable to other accepted tasks, such as the hypothetical purchase task. Methods: Nineteen smokers were asked to purchase 1 week’s worth of cigarettes that they would consume over the following week either at one price that incrementally increased across four weekly sessions (“real” sessions) or four prices in a single session (“potentially real” session), one of which was randomly chosen to be actualized. At each session, participants also completed a hypothetical cigarette purchase task. After each week, participants reported the number of cigarettes they actually smoked. Results: Demand was found to be equivalent under both the real and potentially real reward conditions but statistically different from the demand captured in the hypothetical purchase task. However, the amounts purchased at specific prices in the hypothetical purchase task were significantly correlated with the amount purchased at comparable prices in the other two tasks (except for the highest price examined in both tasks of $1.00 per cigarette). Number of cigarettes consumed that were obtained outside of the study was correlated with study cigarette price. Conclusions: Combined, these results suggest that purchasing behavior during potentially real sessions (1) was not functionally different from real sessions, (2) imposes fewer costs to the experimenter, and (3) has high levels of both internal and external validity. PMID:26187389

  19. The Swedish version of the Acceptance of Chronic Health Conditions Scale for people with multiple sclerosis: Translation, cultural adaptation and psychometric properties.

    PubMed

    Forslin, Mia; Kottorp, Anders; Kierkegaard, Marie; Johansson, Sverker

    2016-11-11

    To translate and culturally adapt the Acceptance of Chronic Health Conditions (ACHC) Scale for people with multiple sclerosis into Swedish, and to analyse the psychometric properties of the Swedish version. Ten people with multiple sclerosis participated in translation and cultural adaptation of the ACHC Scale; 148 people with multiple sclerosis were included in evaluation of the psychometric properties of the scale. Translation and cultural adaptation were carried out through translation and back-translation, by expert committee evaluation and pre-test with cognitive interviews in people with multiple sclerosis. The psychometric properties of the Swedish version were evaluated using Rasch analysis. The Swedish version of the ACHC Scale was an acceptable equivalent to the original version. Seven of the original 10 items fitted the Rasch model and demonstrated ability to separate between groups. A 5-item version, including 2 items and 3 super-items, demonstrated better psychometric properties, but lower ability to separate between groups. The Swedish version of the ACHC Scale with the original 10 items did not fit the Rasch model. Two solutions, either with 7 items (ACHC-7) or with 2 items and 3 super-items (ACHC-5), demonstrated acceptable psychometric properties. Use of the ACHC-5 Scale with super-items is recommended, since this solution adjusts for local dependency among items.

  20. An investigation of error correcting techniques for OMV data

    NASA Technical Reports Server (NTRS)

    Ingels, Frank; Fryer, John

    1992-01-01

    Papers on the following topics are presented: considerations of testing the Orbital Maneuvering Vehicle (OMV) system with CLASS; OMV CLASS test results (first go around); equivalent system gain available from R-S encoding versus a desire to lower the power amplifier from 25 watts to 20 watts for OMV; command word acceptance/rejection rates for OMV; a memo concerning energy-to-noise ratio for the Viterbi-BSC Channel and the impact of Manchester coding loss; and an investigation of error correcting techniques for OMV and Advanced X-ray Astrophysics Facility (AXAF).

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top