[Nursing work and ergonomics].

PubMed

Marziale, M H; Robazzi, M L

2000-12-01

This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

PubMed

Moraes, Berla; Andrade, Valéria Sousa

2012-01-01

This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial.

PubMed

Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

2014-04-17

More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance strategies. When these strategies are effective, implementation within occupational health services can take place to guide construction companies (and others) with the implementation of ergonomic measures. [corrected] Trailnumber: ISRCTN73075751, Date of registration: 30 July 2013.

Toward a transdisciplinary approach of ergonomic design for sustainability.

PubMed

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

PubMed

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Ergonomics content in the physical education teacher's guide in Rwanda.

PubMed

Nellutla, Manobhiram; Patel, Hetal; Kabanda, Aline; Nuhu, Assuman

2012-01-01

An important aspect that affects the effectiveness of ergonomic programs is that inefficient mechanical functioning start at an early age and that back pain and posture problems are already evident in children. Children, from a very early age, as well as adults spend an ever increasing amount of their time in front of computer and television screens. The cumulative effect of this sedentary lifestyle leads to improper posture, as well as inefficient and harmful movement patterns and loss of basic physical skills. Physical Education course should deal not only with sports and physical activities, but also with broader aspects of life-skills and physical functionality. It should offer a solution to the modern technology-based society. Keeping this in perspective, Ergonomics content was introduced in Physical Education Teacher's Guide in Rwandan schools with an aim in preventing musculoskeletal disorder in children.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial

PubMed Central

2014-01-01

Background More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. Methods/Design The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. Discussion The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance strategies. When these strategies are effective, implementation within occupational health services can take place to guide construction companies (and others) with the implementation of ergonomic measures. Trail registration Trailnumber: ISRCTN73075751, Date of registration: 30 July 2013. PMID:24742300

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

PubMed

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design and ergonomics. Methods for integrating ergonomics at hand tool design stage.

PubMed

Marsot, Jacques; Claudon, Laurent

2004-01-01

As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute (INRS) launched in 1999 a research project on the topic of integrating ergonomics into hand tool design, and more particularly to a design of a boning knife. After a brief recall of the difficulties of integrating ergonomics at the design stage, the present paper shows how 3 design methodological tools--Functional Analysis, Quality Function Deployment and TRIZ--have been applied to the design of a boning knife. Implementation of these tools enabled us to demonstrate the extent to which they are capable of responding to the difficulties of integrating ergonomics into product design.

Field tests of a participatory ergonomics toolkit for Total Worker Health

PubMed Central

Kernan, Laura; Plaku-Alakbarova, Bora; Robertson, Michelle; Warren, Nicholas; Henning, Robert

2018-01-01

Growing interest in Total Worker Health® (TWH) programs to advance worker safety, health and well-being motivated development of a toolkit to guide their implementation. Iterative design of a program toolkit occurred in which participatory ergonomics (PE) served as the primary basis to plan integrated TWH interventions in four diverse organizations. The toolkit provided start-up guides for committee formation and training, and a structured PE process for generating integrated TWH interventions. Process data from program facilitators and participants throughout program implementation were used for iterative toolkit design. Program success depended on organizational commitment to regular design team meetings with a trained facilitator, the availability of subject matter experts on ergonomics and health to support the design process, and retraining whenever committee turnover occurred. A two committee structure (employee Design Team, management Steering Committee) provided advantages over a single, multilevel committee structure, and enhanced the planning, communication, and team-work skills of participants. PMID:28166897

Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics.

PubMed

Patrizi, Alfredo; Pennestrì, Ettore; Valentini, Pier Paolo

2016-01-01

The paper deals with the comparison between a high-end marker-based acquisition system and a low-cost marker-less methodology for the assessment of the human posture during working tasks. The low-cost methodology is based on the use of a single Microsoft Kinect V1 device. The high-end acquisition system is the BTS SMART that requires the use of reflective markers to be placed on the subject's body. Three practical working activities involving object lifting and displacement have been investigated. The operational risk has been evaluated according to the lifting equation proposed by the American National Institute for Occupational Safety and Health. The results of the study show that the risk multipliers computed from the two acquisition methodologies are very close for all the analysed activities. In agreement to this outcome, the marker-less methodology based on the Microsoft Kinect V1 device seems very promising to promote the dissemination of computer-aided assessment of ergonomics while maintaining good accuracy and affordable costs. PRACTITIONER’S SUMMARY: The study is motivated by the increasing interest for on-site working ergonomics assessment. We compared a low-cost marker-less methodology with a high-end marker-based system. We tested them on three different working tasks, assessing the working risk of lifting loads. The two methodologies showed comparable precision in all the investigations.

Infant feeding: the interfaces between interaction design and cognitive ergonomics in user-centered design.

PubMed

Lima, Flavia; Araújo, Lilian Kely

2012-01-01

This text presents a discussion on the process of developing interactive products focused on infant behavior, which result was an interactive game for encouraging infant feeding. For that, it describes the use of cognitive psychology concepts added to interaction design methodology. Through this project, this article sustains how the cooperative use of these concepts provides adherent solutions to users' needs, whichever they are. Besides that, it verifies the closeness of those methodologies to boundary areas of knowledge, such as design focused on user and ergonomics.

An ergonomics based design research method for the arrangement of helicopter flight instrument panels.

PubMed

Alppay, Cem; Bayazit, Nigan

2015-11-01

In this paper, we study the arrangement of displays in flight instrument panels of multi-purpose civil helicopters following a user-centered design method based on ergonomics principles. Our methodology can also be described as a user-interface arrangement methodology based on user opinions and preferences. This study can be outlined as gathering user-centered data using two different research methods and then analyzing and integrating the collected data to come up with an optimal instrument panel design. An interview with helicopter pilots formed the first step of our research. In that interview, pilots were asked to provide a quantitative evaluation of basic interface arrangement principles. In the second phase of the research, a paper prototyping study was conducted with same pilots. The final phase of the study entailed synthesizing the findings from interviews and observational studies to formulate an optimal flight instrument arrangement methodology. The primary results that we present in our paper are the methodology that we developed and three new interface arrangement concepts, namely relationship of inseparability, integrated value and locational value. An optimum instrument panel arrangement is also proposed by the researchers. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

PubMed

Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

2017-03-01

Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

A hand-ergonomics training kit: development and evaluation of a package to support improved awareness and critical thinking.

PubMed

Garmer, Karin; Sperling, Lena; Forsberg, Anette

2002-01-01

A need for a hand-ergonomics training kit has been identified to increase critical thinking concerning choice of hand tools. This study deals with the design, use and evaluation of a hand-ergonomics training kit for use in ergonomics training programmes. The effects on awareness of hand ergonomics among training course participants have been evaluated by means of a questionnaire and interviews at a car production plant in Sweden. The evaluation was carried out about one and a half years after training with the hand-ergonomics training kit. The training kit consists of a guide to practical exercises, equipment for measuring hand size and strength, examples of hand tools for use in practical exercises, equipment for testing and evaluating the hand tools and checklists and judgement forms for qualitative evaluation. In addition, the kit contains relevant scientifically based reference reports on hand ergonomics. The evaluation showed that the practical exercises with the hand-ergonomic training kit had, to a remarkable extent, increased individuals' awareness of anthropometric differences and of the importance of ergonomically well-designed hand tools. After the practical exercises with the training kit, communication within the plant when choosing hand tools seems to be based on objective criteria to a higher degree, however, the results indicate that this communication could be further improved.

Dissemination and use of a participatory ergonomics guide for workplaces.

PubMed

Van Eerd, Dwayne; King, Trevor; Keown, Kiera; Slack, Tesha; Cole, Donald C; Irvin, Emma; Amick, Benjamin C; Bigelow, Philip

2016-06-01

Musculoskeletal disorders (MSDs) result in lost-time injury claims and lost productivity worldwide, placing a substantial burden on workers and workplaces. Participatory ergonomics (PE) is a popular approach to reducing MSDs; however, there are challenges to implementing PE programmes. Using evidence to overcome challenges may be helpful but the impacts of doing so are unknown. We sought to disseminate an evidence-based PE tool and to describe its use. An easy-to-use, evidence-based PE Guide was disseminated to workplace parties, who were surveyed about using the tool. The greatest barrier to using the tool was a lack of time. Reported tool use included for training purposes, sharing and integrating the tool into existing programmes. New actions related to tool use included training, defining team responsibilities and suggesting programme implementation steps. Evidence-based tools could help ergonomists overcome some challenges involved in implementing injury reduction programmes such as PE. Practitioner Summary Practitioners experience challenges implementing programmes to reduce the burden of MSDs in workplaces. Implementing participatory interventions requires multiple workplace parties to be 'on-board'. Disseminating and using evidence-based guides may help to overcome these challenges. Using evidence-based tools may help ergonomics practitioners implement PE programmes.

A methodology to determine the level of automation to improve the production process and reduce the ergonomics index

NASA Astrophysics Data System (ADS)

Chan-Amaya, Alejandro; Anaya-Pérez, María Elena; Benítez-Baltazar, Víctor Hugo

2017-08-01

Companies are constantly looking for improvements in productivity to increase their competitiveness. The use of automation technologies is a tool that have been proven to be effective to achieve this. There are companies that are not familiar with the process to acquire automation technologies, therefore, they abstain from investments and thereby miss the opportunity to take advantage of it. The present document proposes a methodology to determine the level of automation appropriate for the production process and thus minimize automation and improve production taking in consideration the ergonomics factor.

Stimulated Recall Methodology for Assessing Work System Barriers and Facilitators in Family-Centered Rounds in a Pediatric Hospital

PubMed Central

Carayon, Pascale; Li, Yaqiong; Kelly, Michelle M.; DuBenske, Lori L.; Xie, Anping; McCabe, Brenna; Orne, Jason; Cox, Elizabeth D.

2014-01-01

Human factors and ergonomics methods are needed to redesign healthcare processes and support patient-centered care, in particular for vulnerable patients such as hospitalized children. We implemented and evaluated a stimulated recall methodology for collective confrontation in the context of family-centered rounds. Five parents and five healthcare team members reviewed video records of their bedside rounds, and were then interviewed using the stimulated recall methodology to identify work system barriers and facilitators in family-centered rounds. The evaluation of the methodology was based on a survey of the participants, and a qualitative analysis of interview data in light of the work system model of Smith and Carayon (1989; 2000). Positive survey feedback from the participants was received. The stimulated recall methodology identified barriers and facilitators in all work system elements. Participatory ergonomics methods such as the stimulated recall methodology allow a range of participants, including parents and children, to participate in healthcare process improvement. PMID:24894378

Ergonomics support for local initiative in improving safety and health at work: International Labour Organization experiences in industrially developing countries.

PubMed

Kawakami, T; Kogi, K

2005-04-15

Ergonomics has played essential roles in the technical cooperation activities of the International Labour Organization (ILO) in occupational safety and health in industrially developing countries. Ergonomics support focusing on practical day-to-day needs at the grass-root workplace has strengthened the local initiative in improving safety and health. Practical action-tools such as ergonomics checklists, local good example photos and group discussions have assisted workers and employers in identifying feasible solutions using locally available resources. Direct participation of workers and employers has been promoted in ergonomics training aimed at immediate solutions. ILO Guidelines on Occupational Safety and Health Management Systems have played increasingly important roles in the systematic planning of local improvement actions. Policy-level programmes to develop network support mechanisms to the grass-root workplace were essential for following up and sustaining local achievements. Practical ergonomics support tools, such as action checklists and low-cost improvement guides, should be developed and widely applied so as to reach grass-root levels and help local people create safer and healthier workplaces.

Field tests of a participatory ergonomics toolkit for Total Worker Health.

PubMed

Nobrega, Suzanne; Kernan, Laura; Plaku-Alakbarova, Bora; Robertson, Michelle; Warren, Nicholas; Henning, Robert

2017-04-01

Growing interest in Total Worker Health ® (TWH) programs to advance worker safety, health and well-being motivated development of a toolkit to guide their implementation. Iterative design of a program toolkit occurred in which participatory ergonomics (PE) served as the primary basis to plan integrated TWH interventions in four diverse organizations. The toolkit provided start-up guides for committee formation and training, and a structured PE process for generating integrated TWH interventions. Process data from program facilitators and participants throughout program implementation were used for iterative toolkit design. Program success depended on organizational commitment to regular design team meetings with a trained facilitator, the availability of subject matter experts on ergonomics and health to support the design process, and retraining whenever committee turnover occurred. A two committee structure (employee Design Team, management Steering Committee) provided advantages over a single, multilevel committee structure, and enhanced the planning, communication, and teamwork skills of participants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Maintenance of submersible pumps in the septic tanks: ergonomic and biological risks to the worker.

PubMed

Mariño, Suzi; Figueiredo, Alex

2012-01-01

In this study was observed the maintenance task of submersible pumps septic tanks installed in industrial bathrooms. This maintenance activity operators are exposed to various biological and ergonomic risks. This type of activity requires its great physical performers who are also subject to contact with human waste in the form of liquids, gases and solids. Besides the problems mentioned, are still exposed to high temperatures that can cause diseases such as hyperthermia or heatstroke. These aspects were observed using the ergonomic assessment methodology in order to suggest improvements that are reflected in productivity and employee satisfaction.

Clinical applicability of robot-guided contact-free laser osteotomy in cranio-maxillo-facial surgery: in-vitro simulation and in-vivo surgery in minipig mandibles.

PubMed

Baek, K-W; Deibel, W; Marinov, D; Griessen, M; Bruno, A; Zeilhofer, H-F; Cattin, Ph; Juergens, Ph

2015-12-01

Laser was being used in medicine soon after its invention. However, it has been possible to excise hard tissue with lasers only recently, and the Er:YAG laser is now established in the treatment of damaged teeth. Recently experimental studies have investigated its use in bone surgery, where its major advantages are freedom of cutting geometry and precision. However, these advantages become apparent only when the system is used with robotic guidance. The main challenge is ergonomic integration of the laser and the robot, otherwise the surgeon's space in the operating theatre is obstructed during the procedure. Here we present our first experiences with an integrated, miniaturised laser system guided by a surgical robot. An Er:YAG laser source and the corresponding optical system were integrated into a composite casing that was mounted on a surgical robotic arm. The robot-guided laser system was connected to a computer-assisted preoperative planning and intraoperative navigation system, and the laser osteotome was used in an operating theatre to create defects of different shapes in the mandibles of 6 minipigs. Similar defects were created on the opposite side with a piezoelectric (PZE) osteotome and a conventional drill guided by a surgeon. The performance was analysed from the points of view of the workflow, ergonomics, ease of use, and safety features. The integrated robot-guided laser osteotome can be ergonomically used in the operating theatre. The computer-assisted and robot-guided laser osteotome is likely to be suitable for clinical use for ostectomies that require considerable accuracy and individual shape. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Participatory ergonomics among female cashiers from a department store.

PubMed

Cristancho, María Yanire León

2012-01-01

The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

Development of a knowledge management system for complex domains.

PubMed

Perott, André; Schader, Nils; Bruder, Ralph; Leonhardt, Jörg

2012-01-01

Deutsche Flugsicherung GmbH, the German Air Navigation Service Provider, follows a systematic approach, called HERA, for investigating incidents. The HERA analysis shows a distinctive occurrence of incidents in German air traffic control in which the visual perception of information plays a key role. The reasons can be partially traced back to workstation design, where basic ergonomic rules and principles are not sufficiently followed by the designers in some cases. In cooperation with the Institute of Ergonomics in Darmstadt the DFS investigated possible approaches that may support designers to implement ergonomic systems. None of the currently available tools were found to be able to meet the identified user requirements holistically. Therefore it was suggested to develop an enhanced software tool called Design Process Guide. The name Design Process Guide indicates that this tool exceeds the classic functions of currently available Knowledge Management Systems. It offers "design element" based access, shows processual and content related topics, and shows the implications of certain design decisions. Furthermore, it serves as documentation, detailing why a designer made to a decision under a particular set of conditions.

[Ergonomic risk assessment: aspects applicable in the light of current standards].

PubMed

Baracco, A; Perrelli, F; Romano, C

2010-01-01

The Italian decree law 81/2008 mentions the application of ergonomic principles as a basic tool for the prevention. In this regulation we can not find the definition either of Ergonomics nor of the competences required for its correct application. The Authors consider that occupational physicians have a suitable competence and knowledge on the matter, thanks to their highly specialized training. Actually, the ergonomic doctrine shows up in the daily practice of occupational physicians, who regularly base their activity on the evaluation of the binomial "worker-task": in the management of fitness to work judgements they try to combine operating conditions with worker's psychophysical state, not confining themselves to a simple expression ofa medico-legal certificate. However, the legislative references to specific regulations raise difficulties to occupational physicians in dealing with aspects such as gender, age, reference values and methodological choices. The Authors debate these difficulties in the application of rules.

Ergonomic adequacy of the baby nursery of child development center located in UFSC - Florianópolis.

PubMed

Vergara, Lizandra Garcia Lupi; Ribet, Lucie Elisa

2012-01-01

A study in the educators' work station at baby nursery of NDI/UFSC, located in Florianópolis, was conducted using the Work Ergonomic Analysis methodological tool. The demand considered was the educators' physical exhaustion caused by the weight carried when taking care of the babies, the postures assumed during the labor activity and the spatial arrangement of the baby nursery. Thinking ergonomically, the spatial arrangement is directly associated to three factors: the formal aspect of the environment, the esthetic aspect including colors and finish quality and the ease of understanding involved in the baby nursery labor. By the ergonomic adequacy it is possible to assert that if were established better conditions of posture and comfort for the educators, as well as satisfactory technical and operational information to carry out the activities, greater safety and welfare would be provided to the babies, the main focus of the work.

Ergonomics and sustainability in the design of everyday use products.

PubMed

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

Ergonomics strategies and actions for achieving productive use of an ageing work-force.

PubMed

Kumashiro, M

2000-07-01

In this report, a basic ERGOMA (Ergonomics in Industrial Management) strategy is proposed as a policy for corporate production and employment in countries where ageing populations and reduced birth rates are imminent, and a strategy related to this is proposed. Specifically, as a strategy at the company level, the results of survey studies aimed at the development of methods for determining job capacity, to enable effective use of the labour of ageing workers, were summarized. A number of the insights gained here are steps in the development of a foundational methodology for practical use, and in actual practice a number of these insights must be subjected to measurements. However, the theory and newly developed methodology described here are thought to represent significant changes from the approaches to job capacity diagnosis and assessment published in the past and from the stance towards utilization of an ageing work-force. The author is confident that this represents new progress in one of the ergonomics approach to dealing with the working environment of ageing workers and an ageing work-force in general.

Ergonomics, quality and continuous improvement--conceptual and empirical relationships in an industrial context.

PubMed

Eklund, J

1997-10-01

This paper reviews the literature comparing the fields of ergonomics and quality, mainly in an industrial context, including mutual influences, similarities and differences. Relationships between ergonomics and the factors: work conditions, product design, ISO 9000, continuous improvements and TQM are reviewed in relation to the consequence, application, and process domains. The definitions of ergonomics and quality overlap substantially. Quality deficiencies, human errors and ergonomics problems often have the same cause, which in many cases can be traced to the design of work, workplace and environment e.g. noise, light, postures, loads, pace and work content. In addition, the possibility of performing to a high standard at work is an important prerequisite for satisfaction and well-being. Contradictions between the two fields have been identified in the view of concepts such as standardization, reduction of variability and copying of best practice, requiring further research. The field of quality would gain by incorporating ergonomics knowledge, especially in the areas of work design and human capability, since these factors are decisive for human performance and also therefore the performance of the systems involved. The field of ergonomics, on the other hand, would benefit from developing a stronger emphasis on methodologies and structures for improvement processes, including a clearer link with leadership and company strategies. Just as important is a further development of practicable participative ergonomics methods and tools for use at workplaces by the workers themselves, in order to integrate the top-down and the bottom-up processes and achieve better impact. Using participative processes for problem-solving and continuous improvement, focusing ergonomics and quality jointly has a great potential for improving working conditions and quality results simultaneously, and satisfying most of the interested parties.

[AVIATION MEDICINE: THEORETICAL CONCEPTS AND FOCAL FUNDAMENTAL AND PRACTICAL ISSUES (for the 80th anniversary of the Research Test Center of Aerospace Medicine and Military Ergonomics)].

PubMed

Zhdanko, I M; Pisarev, A A; Vorona, A A; Lapa, V V; Khomenko, M N

2015-01-01

The article discloses postulates of theoretical concepts that make the methodological basis for addressing the real-world aviation medicine challenges of humanizing aviator's environment, labor content and means, and health and performance maintenance. Under consideration are focal fundamental and practical issues arising with the technological progress in aviation and dealt with at the AF CRI Research Test Center of Aerospace Medicine and Military Ergonomics.

Ergonomic and organizational analysis of an association of collectors of recyclable waste.

PubMed

Maria, R; Chagas, T; Silva, V

2012-01-01

The managerial difficulties encountered by an Association of Recyclable Materials Collectors to organize and ensure the perpetuation of his work gave rise to this research. In order to overcome the difficulties encountered with regard to accounting, organizational and ergonomic work, we used a methodology capable of providing a greater interaction between researchers and collectors, facilitating the exchange of knowledge and the perpetuation of the techniques used. Improvements were seen in relation to screening, storage and organization of work.

Workplace Ergonomics Reference Guide

MedlinePlus

... between use of keyboard and mouse (use keystroke equivalents to mouse).  Change your posture frequently throughout the ... walls should be removed.  The carpeting should be non-absorbent in warm, dark colors without padding or ...

A broader consideration of human factor to enhance sustainable building design.

PubMed

Attaianese, Erminia

2012-01-01

The link between ergonomic/human factor and sustainability seems to be clearly evidenced mainly in relation to social dimension of sustainability, in order to contribute to assure corporate social responsibility and global value creation. But the will to establish an equilibrated connection among used resources in human activities, supported by the sustainability perspective, evidences that the contribution of ergonomics/human factors can be effectively enlarged to other aspects, especially in relation to building design. In fact a sustainable building is meant to be a building that contributes, through its characteristics and attribute, to a sustainable development by assuring, in the same time, a decrease of resources use and environmental impact and an increase of health, safety and comfort of the occupants. The purpose of this paper is to analyze in a broader sense the contribution of ergonomic/human factor to design of sustainable building, focusing how ergonomics principles, methodology and techniques can improve building design, enhancing its sustainability performance during all phases of building lifecycle.

Human Sensibility Ergonomics Approach to Vehicle Simulator Based on Dynamics

NASA Astrophysics Data System (ADS)

Son, Kwon; Choi, Kyung-Hyun; Yoon, Ji-Sup

Simulators have been used to evaluate drivers' reactions to various transportation products. Most research, however, has concentrated on their technical performance. This paper considers driver's motion perception on a vehicle simulator through the analysis of human sensibility ergonomics. A sensibility ergonomic method is proposed in order to improve the reliability of vehicle simulators. A simulator in a passenger vehicle consists of three main modules such as vehicle dynamics, virtual environment, and motion representation modules. To evaluate drivers' feedback, human perceptions are categorized into a set verbal expressions collected and investigated to find the most appropriate ones for translation and angular accelerations of the simulator. The cut-off frequency of the washout filter in the representation module is selected as one sensibility factor. Sensibility experiments were carried out to find a correlation between the expressions and the cut-off frequency of the filter. This study suggests a methodology to obtain an ergonomic database that can be applied to the sensibility evaluation of dynamic simulators.

Multi-Function Displays: A Guide for Human Factors Evaluation

DTIC Science & Technology

2013-11-01

mental workload in rotary wing aircraft . Ergonomics , 36, 1121 - 40. Smith, S., & Mosier, J. (1984). Design guidelines for the user interface for...Monterey Technologies, Inc., except one designated by (*), who is from CAMI. 16. Abstract This guide is designed to assist aircraft ...section. 17. Key Words 18. Distribution Statement Multi-Function Displays, Display Design , Avionics, Human Factors Criteria, Aircraft

Market Intelligence Guide

DTIC Science & Technology

2012-01-05

learn about the latest designs , trends in fashion, and scientific breakthroughs in chair ergonomics . Using this tradeshow, the Furnishings Commodity...these tools is essential to designing the optimal contract that reaps the most value from the exchange. Therefore, this market intelligence guide is...portfolio matrix) that are transferrable to the not-for-profit sector are absent. Each of these tools is essential to designing the optimal contract that

Enhanced ergonomics approaches for product design: a user experience ecosystem perspective and case studies.

PubMed

Xu, Wei

2014-01-01

This paper first discusses the major inefficiencies faced in current human factors and ergonomics (HFE) approaches: (1) delivering an optimal end-to-end user experience (UX) to users of a solution across its solution lifecycle stages; (2) strategically influencing the product business and technology capability roadmaps from a UX perspective and (3) proactively identifying new market opportunities and influencing the platform architecture capabilities on which the UX of end products relies. In response to these challenges, three case studies are presented to demonstrate how enhanced ergonomics design approaches have effectively addressed the challenges faced in current HFE approaches. Then, the enhanced ergonomics design approaches are conceptualised by a user-experience ecosystem (UXE) framework, from a UX ecosystem perspective. Finally, evidence supporting the UXE, the advantage and the formalised process for executing UXE and methodological considerations are discussed. Practitioner Summary: This paper presents enhanced ergonomics approaches to product design via three case studies to effectively address current HFE challenges by leveraging a systematic end-to-end UX approach, UX roadmaps and emerging UX associated with prioritised user needs and usages. Thus, HFE professionals can be more strategic, creative and influential.

Hazard identification and pre-map with a simple specific tool: synthesis of application experience in handicrafts in various productive sectors.

PubMed

Colombini, Daniela; Occhipinti, Enrico; Peluso, Raffaele; Montomoli, Loretta

2012-01-01

In August 2009, an international group was founded with the task of developing a "toolkit for MSD prevention" under the IEA and in collaboration with the World Health Organization.According to the ISO standard 11228 series and the new Draft ISO TR 12259 "Application document guides for the potential user", our group developed a preliminary "mapping" methodology of occupational hazards in the craft industry, supported by software (Excel®, free download on: www.epmresearch.org).The possible users of toolkits are: members of health and safety committees; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers providing basic occupational health services; occupational health and safety specialists.The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazards identification and risk estimation to be made. It is thus possible to decide for which occupational hazards a more exhaustive risk assessment will be necessary and which occupational consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).The methodology has been applied in different situations of small and medium craftsmanship Italian enterprises: leather goods, food, technical dental work, production of artistic ceramics and stained glass, beekeeping activities. The results are synthetically reported and discussed in this paper.

Computer ergonomics: the medical practice guide to developing good computer habits.

PubMed

Hills, Laura

2011-01-01

Medical practice employees are likely to use computers for at least some of their work. Some sit several hours each day at computer workstations. Therefore, it is important that members of your medical practice team develop good computer work habits and that they know how to align equipment, furniture, and their bodies to prevent strain, stress, and computer-related injuries. This article delves into the field of computer ergonomics-the design of computer workstations and work habits to reduce user fatigue, discomfort, and injury. It describes practical strategies medical practice employees can use to improve their computer work habits. Specifically, this article describes the proper use of the computer workstation chair, the ideal placement of the computer monitor and keyboard, and the best lighting for computer work areas and tasks. Moreover, this article includes computer ergonomic guidelines especially for bifocal and progressive lens wearers and offers 10 tips for proper mousing. Ergonomically correct posture, movements, positioning, and equipment are all described in detail to enable the frequent computer user in your medical practice to remain healthy, pain-free, and productive.

Theory versus practice in the human factors and ergonomics discipline: Trends in journal publications from 1960 to 2010.

PubMed

Chung, Amy Z Q; Williamson, Ann

2018-01-01

The research-practice gap has been highlighted as a barrier to effective practice in human factors and ergonomics (HFE). There is also evidence of a theory-research gap that may be limiting the scientific evidence base of HFE. The purpose of this study was to examine trends in journal publications, especially relating to the research-practice gap and the involvement of theory over time. A content analysis was conducted on 425 journal articles published in Human Factors, Ergonomics, and Applied Ergonomics from 1960 to 2010. Results showed evidence of growth in applied research with increasing collaborative research between research and industry, larger research teams, and more empirical research-especially on applied problems. While there has been a corresponding increase in the involvement of theory in HFE publications, around half of the publications failed to acknowledge theory. This calls into question whether the HFE discipline may be missing the benefits of theory to guide research and subsequent practice, and to enhance the development of new ideas. Copyright © 2017 Elsevier Ltd. All rights reserved.

Practical ways to facilitate ergonomics improvements in occupational health practice.

PubMed

Kogi, Kazutaka

2012-12-01

Recent advances in participatory programs for improving workplace conditions are discussed to examine practical ways to facilitate ergonomics improvements. Participatory training programs are gaining importance, particularly in promoting occupational health and safety in small-scale workplaces. These programs have led to many improvements that can reduce work-related risks in varied situations. Recent experiences in participatory action-oriented training programs in small workplaces and agriculture are reviewed.The emphasis of the review is on training steps, types of improvements achieved, and the use of action tools by trainers and training participants. Immediate improvements in multiple technical areas are targeted, including materials handling,workstation design, physical environment, welfare facilities, and work organization. In facilitating ergonomics improvements in each local situation, it is important to focus on (a) building on local good practices; (b) applying practical, simple improvements that apply the basic principles of ergonomics; and (c) developing action-oriented toolkits for direct use by workers and managers. This facilitation process is effective when locally designed action toolkits are used by trainers, including local good examples, action checklists, and illustrated how-to guides. Intervention studies demonstrate the effectiveness of participatory steps that use these toolkits in promoting good practices and reducing work-related risks. In facilitating ergonomics improvements in small-scale workplaces, it is important to focus on practical, low-cost improvements that build on local good practices. The use of action-oriented toolkits reflecting basic ergonomics principles is helpful.The promotion of the intercountry networking of positive experiences in participatory training is suggested.

Utilization of wheel dop based on ergonomic aspects

NASA Astrophysics Data System (ADS)

Widiasih, Wiwin; Murnawan, Hery; Setiawan, Danny

2017-06-01

Time is an important thing in life. People need a tool or equipment to measure time which is divided into two types, namely clock and watch. Everyone needs those kinds of tool. It becomes an opportunity for manufacturer to build a business. However, establishing a business by depending on the demand is not enough, it is necessary to take a consideration of making innovation. Innovation is a difficult thing to find out, but it is not impossible to do it. By creating an innovative product, it can be a strategy to win the competitive market. This study aimed to create an innovative product based on the ergonomic aspects, which was by utilizing wheel dop. This methodology consisted of pre-study, planning and product development, and product analysis. This product utilized wheel dop and was made based on the ergonomic aspects.

Prevention of musculoskeletal disorders (MSDs) in office work: a case study.

PubMed

Lima, Tânia M; Coelho, Denis A

2011-01-01

Twelve recently built office work stations, where jobs imply continued use of information and communication technologies, were analyzed for ergonomic risk factors. Based on a literature review of ergonomic recommendations for computer and general office work, a checklist was devised for assistance in identifying inadequate ergonomic situations, a process that was informed by pain complaints information. RULA (Rapid Upper Limb Assessment) was selected to estimate the risk of MSDs, considering the criteria of applicability and appropriateness to the case studied. This method was applied by an occupational health and safety technician to the most critical job observed in the workplace. Criticality was estimated through observations aided by the systematic use of a checklist tailored to the specific office scenario. Recommendations for change were provided for implementation in all workplaces in the office, in order to improve work conditions, and guide the setup of a MSD prevention training program.

Evaluation of a Participatory Ergonomics Intervention in Small Commercial Construction Firms

PubMed Central

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T.; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Methods Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short term and intermediate impacts and long term outcomes from surveys and field records. Results Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers’ knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. Conclusions The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. PMID:27094450

Macroergonomic analysis and design for improved safety and quality performance.

PubMed

Kleiner, B M

1999-01-01

Macroergonomics, which emerged historically after sociotechnical systems theory, quality management, and ergonomics, is presented as the basis for a needed integrative methodology. A macroergonomics methodology was presented in some detail to demonstrate how aspects of microergonomics, total quality management (TQM), and sociotechnical systems (STS) can be triangulated in a common approach. In the context of this methodology, quality and safety were presented as 2 of several important performance criteria. To demonstrate aspects of the methodology, 2 case studies were summarized with safety and quality performance results where available. The first case manipulated both personnel and technical factors to achieve a "safety culture" at a nuclear site. The concept of safety culture is defined in INSAG-4 (International Atomic Energy Agency, 1991). as "that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance." The second case described a tire manufacturing intervention to improve quality (as defined by Sink and Tuttle, 1989) through joint consideration of technical and social factors. It was suggested that macroergonomics can yield greater performance than can be achieved through ergonomic intervention alone. Whereas case studies help to make the case, more rigorous formative and summative research is needed to refine and validate the proposed methodology respectively.

Ergonomic evaluation of workload by milk production - a bibliometric analysis.

PubMed

de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

2017-09-21

The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

Quantifying tasks, ergonomic exposures and injury rates among school custodial workers.

PubMed

Village, J; Koehoorn, M; Hossain, S; Ostry, A

2009-06-01

A job exposure matrix of ergonomics risk factors was constructed for school custodial workers in one large school district in the province of British Columbia using 100 h of 1-min fixed-interval observations, participatory worker consensus on task durations and existing employment and school characteristic data. Significant differences in ergonomics risk factors were found by tasks and occupations. Cleaning and moving furniture, handling garbage, cleaning washrooms and cleaning floors were associated with the most physical risks and the exposure was often higher during the summer vs. the school year. Injury rates over a 4-year period showed the custodian injury rate was four times higher than the overall injury rate across all occupations in the school district. Injury rates were significantly higher in the school year compared with summer (12.2 vs. 7.0 per 100 full-time equivalents per year, p < 0.05). Custodial workers represent a considerable proportion of the labour force and have high injury rates, yet ergonomic studies are disproportionately few. Previous studies that quantified risk factors in custodial workers tended to focus on a few tasks or specific risk factors. This study, using participatory ergonomics and observational methods, systematically quantifies the broad range of musculoskeletal risk factors across multiple tasks performed by custodial workers in schools, adding considerably to the methodological literature.

Mutually Augmented Cognition

NASA Astrophysics Data System (ADS)

Friesdorf, Florian; Pangercic, Dejan; Bubb, Heiner; Beetz, Michael

In mac, an ergonomic dialog-system and algorithms will be developed that enable human experts and companions to be integrated into knowledge gathering and decision making processes of highly complex cognitive systems (e.g. Assistive Household as manifested further in the paper). In this event we propose to join algorithms and methodologies coming from Ergonomics and Artificial Intelligence that: a) make cognitive systems more congenial for non-expert humans, b) facilitate their comprehension by utilizing a high-level expandable control code for human experts and c) augment representation of such cognitive system into “deep representation” obtained through an interaction with human companions.

Ergonomic assessment methodologies in manual handling of loads--opportunities in organizations.

PubMed

Pires, Claudia

2012-01-01

The present study was developed based on the analysis of workplaces in the engineering industry, particularly in automotive companies. The main objectives of the study were to evaluate the activities present in the workplace concerning manual handling, using assessment methodologies NIOSH Ergonomic Equation [1] and Manual Material Handling [2], present in ISO 11228 [3-4], and to consider the possibility of developing musculoskeletal injuries associated with these activities, an issue of great concern in all industrial sectors. Similarly, it was also shown the suitability of each method to the task concerned. The study was conducted in three steps. The first step was to collect images and information about the target tasks. As a second step proceeded to the analysis, determining the method to use and to evaluate activities. Finally, we found the results obtained and acted on accordingly. With the study observed situations considered urgent action, according to the methodologies used, and proceeded to develop solutions in order to solve the problems identified, eliminating and / or minimizing embarrassing situations and harmful to employees.

The Impact of Physical and Ergonomic Hazards on Poultry Abattoir Processing Workers: A Review.

PubMed

Harmse, Johannes L; Engelbrecht, Jacobus C; Bekker, Johan L

2016-02-06

The poultry abattoir industry continues to grow and contribute significantly to the gross domestic product in many countries. The industry expects working shifts of eight to eleven hours, during which workers are exposed to occupational hazards which include physical hazards ranging from noise, vibration, exposure to cold and ergonomic stress from manual, repetitive tasks that require force. A PubMed, Medline and Science Direct online database search, using specific keywords was conducted and the results confirmed that physical and ergonomic hazards impact on abattoir processing workers health, with harm not only to workers' health but also as an economic burden due to the loss of their livelihoods and the need for treatment and compensation in the industry. This review endeavours to highlight the contribution poultry processing plays in the development of physical agents and ergonomic stress related occupational diseases in poultry abattoir processing workers. The impact includes noise-induced hearing loss, increased blood pressure, menstrual and work related upper limb disorders. These are summarised as a quick reference guide for poultry abattoir owners, abattoir workers, poultry associations, occupational hygienists and medical practitioners to assist in the safer management of occupational health in poultry abattoirs.

The Impact of Physical and Ergonomic Hazards on Poultry Abattoir Processing Workers: A Review

PubMed Central

Harmse, Johannes L.; Engelbrecht, Jacobus C.; Bekker, Johan L.

2016-01-01

The poultry abattoir industry continues to grow and contribute significantly to the gross domestic product in many countries. The industry expects working shifts of eight to eleven hours, during which workers are exposed to occupational hazards which include physical hazards ranging from noise, vibration, exposure to cold and ergonomic stress from manual, repetitive tasks that require force. A PubMed, Medline and Science Direct online database search, using specific keywords was conducted and the results confirmed that physical and ergonomic hazards impact on abattoir processing workers health, with harm not only to workers’ health but also as an economic burden due to the loss of their livelihoods and the need for treatment and compensation in the industry. This review endeavours to highlight the contribution poultry processing plays in the development of physical agents and ergonomic stress related occupational diseases in poultry abattoir processing workers. The impact includes noise-induced hearing loss, increased blood pressure, menstrual and work related upper limb disorders. These are summarised as a quick reference guide for poultry abattoir owners, abattoir workers, poultry associations, occupational hygienists and medical practitioners to assist in the safer management of occupational health in poultry abattoirs. PMID:26861374

Ergonomics and Kaizen as strategies for competitiveness: a theoretical and practical in an automotive industry.

PubMed

Vieira, Leandro; Balbinotti, Giles; Varasquin, Adriano; Gontijo, Leila

2012-01-01

With increased international competitiveness in the automotive industry, came the concern of the companies save costs and lower production costs. For this purpose many ways are designed to reduce costs and waste of raw materials and reduce activities that do not aggregate value to manufacturing processes. In the early XVII appears the manufacturing system, which processes were hard with little concern for the health and safety of employees and conditions of the workplace. After the advent of the production system called lean manufacturing, a new paradigm in terms of production system capable of providing high levels of productivity and quality. It is based on waste elimination that occur during the production process. After began a new way of thinking, creating a culture of continuous improvement and lean process with no waste and reducing costs, without neglecting the welfare worker and improving the conditions of their work environment. This paper presents a reflection on the application of ergonomics in a lean production system of an automotive industry, using methodology based on the Kaizen (Continuous Improvement) to gain performance and improving the conditions of the workplace, also will be presented with positive and negative points in using this methodology in relation to ergonomics. The research will be conducted by collecting data 'in loco' and interviews with workers. Some studies show that in companies that are lean system and using the methodology of Kaizen, the results of product quality, levels of absenteeism and accidents are better than those obtained in companies that do not apply the same concept.

Hands-on lessons in ergonomics for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

Ergonomics risk factors apply to everybody. Numerous adults have experienced disabling injuries related to use of computers and other forms of technology. Now children are using technology even more than adults. Increasingly ergonomics risk factors are being recognized as present in the world of children. Outreach to schools and the surrounding community by employers may help protect the future work force. A growing body of researchers believe that children can benefit from the early introduction of ergonomics awareness and preventative measures. While individual representatives of the educational system may embrace the concept of introducing ergonomics into the classroom, a numbermore » of barriers can prevent implementation of integrated programs. Some of the barriers to introducing ergonomics in schools have been absence of a tie to educational standards, the existing demands on teaching hours, and the absence of easily executable lesson plans. Ergonomics is rarely included in teacher training and professional ergonomics expertise is needed for the development of a class-based program. As part of Strategic Vision plan for 2025, a National Laboratory identified community outreach and the future workforces as key areas for initiatives. A series of hands-on interactive modules have been developed by professional ergonomics specialists. They are being tested with elementary, middle and high school students. Where possible, the content has been tied to the educational standards in the State of California in the USA. Currently the modules include grip strength, effective breathing, optimal keyboard and mouse positions, optimizing chairs, posture and movement, backpack safety and safe lifting. Each module takes the students through a related activity or experience. An individual worksheet asks them questions about the experience and guides them to consider implications in their activities of daily living. A module on hearing is under development. The goal is to have a toolkit that teachers can use in classrooms with minimal training. The kit will come with lesson plans, including background material, key points, questions and answers, possible homework assignments and references. It will include instructions and worksheets for students as well as the materials needed for each module. A pre- and posttest will be administered to test the awareness and understanding of the principles introduced in through the modules. This interactive session will offer the opportunity to for attendees to participate in some of the modules that have been developed to provide experiential demonstration of ergonomics principles. Attendees will experience ergonomics in action and be able to evaluate the applicability of the process in their own area in the world of ergonomics. The session will consist of 20 minutes introduction, 40 minutes working with the toolkit, finally another 30 minutes for questions or discussion for a total time of 90 minutes.« less

Participatory ergonomics to reduce exposure to psychosocial and physical risk factors for low back pain and neck pain: results of a cluster randomised controlled trial.

PubMed

Driessen, Maurice T; Proper, Karin I; Anema, Johannes R; Knol, Dirk L; Bongers, Paulien M; van der Beek, Allard J

2011-09-01

This study investigated the effectiveness of the Stay@Work participatory ergonomics programme to reduce workers' exposure to psychosocial and physical risk factors. 37 departments (n=3047 workers) from four Dutch companies participated in this cluster randomised controlled trial; 19 (n=1472 workers) were randomised to an intervention group (participatory ergonomics) and 18 (n=1575 workers) to a control group (no participatory ergonomics). During a 6 h meeting guided by an ergonomist, working groups devised ergonomic measures to reduce psychosocial and physical workload and implemented them within 3months in their departments. Data on psychosocial and physical risk factors for low back pain and neck pain were collected at baseline and after 6 months. Psychosocial risk factors were measured using the Job Content Questionnaire and physical risk factors using the Dutch Musculoskeletal Questionnaire. Intervention effects were studied using multilevel analysis. Intervention group workers significantly increased on decision latitude (0.29 points; 95% CI 0.07 to 0.52) and decision authority (0.16 points; 95% CI 0.04 to 0.28) compared to control workers. However, exposure to awkward trunk working postures significantly increased in the intervention group (OR 1.86; 95% CI 1.15 to 3.01) compared to the control group. No significant differences between the intervention and control group were found for the remaining risk factors. After 6months, loss to follow-up was 35% in the intervention group and 29% in the control group. Participatory ergonomics was not effective in reducing exposure to psychosocial and physical risk factors for low back pain and neck pain among a large group of workers. ISRCTN27472278.

Evaluation of a participatory ergonomics intervention in small commercial construction firms.

PubMed

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A

2016-06-01

Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short-term and intermediate impacts and long-term outcomes from surveys and field records. Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers' knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. Am. J. Ind. Med. 59:465-475, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Ergonomics investigation of retail ice cream operations.

PubMed

Dempsey, P G; McGorry, R R; Cotnam, J; Braun, T W

2000-04-01

A comprehensive ergonomics evaluation of retail ice cream shops, including field and laboratory data collection, was conducted using a human:workplace model approach to ergonomics practice. The goal of the evaluation was to provide recommendations to enhance the health, safety, and productivity of shop employees. Active and passive surveillance and facility walk-throughs were used to guide the selection of analyses. A primary focus of the investigation was quantifying the task demands of scooping ice cream, which have not been documented in the literature. This goal was accomplished through the use of a custom-designed instrumented ice cream scoop. Data were collected at an ice cream shop under typical conditions, while the laboratory experiment investigated task demands of ice cream scooping over a range of realistic temperatures. Manual materials handling task analyses and anthropometric evaluations comprised the majority of other analyses performed. Recommendations are presented that are applicable to the operation of retail ice cream shops that serve hard (i.e., scooped) ice cream.

From dV-Trainer to Real Robotic Console: The Limitations of Robotic Skill Training.

PubMed

Yang, Kun; Zhen, Hang; Hubert, Nicolas; Perez, Manuela; Wang, Xing Huan; Hubert, Jacques

To investigate operators' performance quality, mental stress, and ergonomic habits through a training curriculum on robotic simulators. Forty volunteers without robotic surgery experience were recruited to practice 2 exercises on a dV-Trainer (dVT) for 14 hours. The simulator software (M-score a ) provided an automatic evaluation of the overall score for the surgeons' performance. Each participant provided a subjective difficulty score (validity to be proven) for each exercise. Their ergonomic habits were evaluated based on the workspace range and armrest load-validated criteria for evaluating the proficiency of using the armrest. They then repeated the same tasks on a da Vinci Surgical Skill Simulator for a final-level test. Their final scores were compared with their initial scores and the scores of 5 experts on the da Vinci Surgical Skill Simulator. A total of 14 hours of training on the dVT significantly improved the surgeons' performance scores to the expert level with a significantly reduced workload, but their ergonomic score was still far from the expert level. Sufficient training on the dVT improves novices' performance, reduces psychological stress, and inculcates better ergonomic habits. Among the evaluated criteria, novices had the most difficulty in achieving expert levels of ergonomic skills. The training benefits of robotic surgery simulators should be determined with quantified variables. The detection of the limitations during robotic training curricula could guide the targeted training and improve the training effect. Copyright © 2017. Published by Elsevier Inc.

[Influence of socio-professional factors on absenteeism of hospital personnel].

PubMed

Boufares, F; Njah, M

2001-03-01

The goal of this work is to analyze the different reasons of absenteeism in hospital and to identify the socioprofessional characteristics of absentees, what would permit to guide a strategy on modes and content of a preventive action. The adopted methodology is a retrospective descriptive investigation carrying on absenteeism of the personnel working in academic hospital Farhat Hached of Sousse (Tunisia) during 1997. So, on the 1433 salaried employees, 1028 (71.7%), left once or more for different reasons. The global absenteeism rate is 4.03% and the mean absence by agent is equal to 14.7 days. Among the absences motives, illness predominate extensively with 55% of the whole. Maternity and postnatal leave constitute 30%, 8% for "Industrial accidents" of work stops. Whatever is the reason, we observes more absent women than absent men. This survey shows the importance of socioprofessional factors in genesis of absenteeism and, to reduce the problem, the necessity to improve conditions of work, moreover in his ergonomic, social and psychological aspects.

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review

PubMed Central

Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

Introduction Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54–93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. Methods This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Results Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session and at the end of the working day, while 61.5% of the original articles emphasized the use of modern and ergonomic instruments. Discussion This review showed that static postures are strongly responsible in the etiology of musculoskeletal disorders. The awkward postures more frequently identified among dental professionals are: extreme forward-head and neck flexion; trunk inclination and rotation towards one side; lifting one or both shoulders; increased curvature of the thoracic vertebral column; incorrect positioning of the lower limbs with thigh-leg angle of less than 90°. It is really important to use of a modern workstation with appropriate ergonomic supports. Among the preventive ergonomic measures, literature has widely recognized the role of physical activity and of a neutral and balanced posture. The present review has some limits: a large part of the selected studies did not have a high methodological quality score and an inadequate statistical analysis. PMID:29362689

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review.

PubMed

De Sio, Simone; Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54-93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session and at the end of the working day, while 61.5% of the original articles emphasized the use of modern and ergonomic instruments. This review showed that static postures are strongly responsible in the etiology of musculoskeletal disorders. The awkward postures more frequently identified among dental professionals are: extreme forward-head and neck flexion; trunk inclination and rotation towards one side; lifting one or both shoulders; increased curvature of the thoracic vertebral column; incorrect positioning of the lower limbs with thigh-leg angle of less than 90°. It is really important to use of a modern workstation with appropriate ergonomic supports. Among the preventive ergonomic measures, literature has widely recognized the role of physical activity and of a neutral and balanced posture. The present review has some limits: a large part of the selected studies did not have a high methodological quality score and an inadequate statistical analysis.

Planning for Technology: An Administrator's Guide to the Next Century.

ERIC Educational Resources Information Center

Day, William C.

1998-01-01

Discusses ways for preparing schools for integrating technology, including designing the wiring infrastructure, equipment purchases, furniture needs, and ergonomic considerations. Describes four levels of Internet connectivity access and provides a list of contact names, phone numbers, and Web sites for technology fund information from each state.…

Workplace Health and Safety.

ERIC Educational Resources Information Center

Massachusetts Career Development Inst., Springfield.

This booklet is one of six texts from a workplace literacy curriculum designed to assist learners in facing the increased demands of the workplace. It is a short guide to workplace health and safety issues, laws, and regulations, especially in Massachusetts. Topics covered include the following: (1) safety issues--workplace ergonomics, the…

[Working hypothesis of simplified techniques for the first mapping of occupational hazards in handicraft. First part: ergonomics hazards].

PubMed

Colombini, D; Di Leone, G; Occhipinti, E; Montomoli, L; Ruschioni, A; Giambartolomei, M; Ardissone, S; Fanti, M; Pressiani, S; Placci, M; Cerbai, M; Preite, S

2009-01-01

During the last Congress of the International Ergonomics Association (IEA), Beijing - China August 2009, in collaboration with World Health Organization an international group for developing a "toolkit for MSD prevention" was founded. Possible users of toolkits are: members of a health and safety committee; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers implementing basic occupational health services; occupational health and safety specialists. According with ISO standard 11228 series and their ISO Application document for the Key enters and Quick Assessment (green/red conditions), our group developed a first mapping methodology of occupational hazards in handicraft, working with the support of the information technology (Excel). This methodology, utilizing specific key enters and quick evaluation, allows a simple risk estimation. So it is possible to decide for which occupational hazards will be necessary an exhaustive assessment and to which professional consultant it is better to direct them to (worker's doctor, engineer, chemical, etc.).

The effects of occupational interventions on reduction of musculoskeletal symptoms in the nursing profession.

PubMed

Bos, E H; Krol, B; Van Der Star, A; Groothoff, J W

2006-06-10

The objective of the review was to gain more insight into the effects of occupational interventions for primary prevention of musculoskeletal symptoms in healthcare workers. The Cochrane Collaboration methodological guidelines for systematic reviews functioned as a starting point. Thirteen studies meeting the inclusion criteria were analysed for methodological quality and effects. Eight outcome effect areas were established and defined as areas in which an effect had been determined in at least two studies. A method based on levels of scientific evidence was then used to synthesize the information available. Strong scientific evidence for the beneficial effect of occupational interventions was found for the outcome effect areas physical discomfort, technical performance of transfers and frequency of manual lifting. Insufficient evidence was found for the effect areas absenteeism due to musculoskeletal problems, musculoskeletal symptoms, fatigue, perceived physical load and knowledge of risk factors at work and ergonomic principles. Training and education combined with an ergonomic intervention were found to be effective.

New guidelines for health care for alcohol and drug users and the real work: possible contributions of ergonomics to the restructuring of work and competence development.

PubMed

de Almeida, Daniela Tonizza; de Oliveira Echternacht, E Eliza Helena

2012-01-01

The study investigated, through a literature review, how the research community has addressed the difficulties experiences by the teams in front of new prescriptions for the treatment of alcohol and drug users in Centers of Psyco-social Attention and discusses the relevance of the conceptual and methodological references of Ergonomics for understand and transform work situations. Such studies tend to do an analysis that does not account for variability present in both the workers and work organization and prioritize the analysis of final results of the, disqualifying local inventions due to tasks imposed by policy guidelines. It is estimated that the Ergonomics, considering the diversity of training, learning and experience, contributes to the implementation of media to promote the continued development of competences that can meet the demands of production and expands knowledge about the problems experienced and the possibilities of overcoming them.

A randomised controlled trial on whether a participatory ergonomics intervention could prevent musculoskeletal disorders.

PubMed

Haukka, E; Leino-Arjas, P; Viikari-Juntura, E; Takala, E-P; Malmivaara, A; Hopsu, L; Mutanen, P; Ketola, R; Virtanen, T; Pehkonen, I; Holtari-Leino, M; Nykänen, J; Stenholm, S; Nykyri, E; Riihimäki, H

2008-12-01

To examine the efficacy of a participatory ergonomics intervention in preventing musculoskeletal disorders among kitchen workers. Participatory ergonomics is commonly recommended to reduce musculoskeletal disorders, but evidence for its effectiveness is sparse. A cluster randomised controlled trial among the 504 workers of 119 kitchens in Finland was conducted during 2002-2005. Kitchens were randomised to an intervention (n = 59) and control (n = 60) group. The duration of the intervention that guided the workers to identify strenuous work tasks and to seek solutions for decreasing physical and mental workload, was 11 to 14 months. In total, 402 ergonomic changes were implemented. The main outcome measures were the occurrence of and trouble caused by musculoskeletal pain in seven anatomical sites, local fatigue after work, and sick leave due to musculoskeletal disorders. Individual level data were collected by a questionnaire at baseline and every 3 months during the intervention and 1-year follow-up period. All response rates exceeded 92%. No systematic differences in any outcome variable were found between the intervention and control groups during the intervention or during the 1-year follow-up. The intervention did not reduce perceived physical work load and no evidence was found for the efficacy of the intervention in preventing musculoskeletal disorders among kitchen workers. It may be that a more comprehensive redesign of work organisation and processes is needed, taking more account of workers' physical and mental resources.

Clinical, Ergonomic, and Economic Outcomes With Multichamber Bags Compared With (Hospital) Pharmacy Compounded Bags and Multibottle Systems: A Systematic Literature Review.

PubMed

Alfonso, Jorge Emilio; Berlana, David; Ukleja, Andrew; Boullata, Joseph

2017-09-01

Multichamber bags (MCBs) may offer potential clinical, ergonomic, and economic advantages compared with (hospital) pharmacy compounded bags (COBs) and multibottle systems (MBSs). A systematic literature review was performed to identify and assess the available evidence regarding advantages of MCBs compared with COBs and MBSs. Medline, Embase, the Cochrane Databases, and EconLit were searched for articles reporting clinical, ergonomic, and economic outcomes for MCBs compared with COBs or MBSs. The search was limited to studies conducted in hospitalized patients >2 years of age that were published in English between January 1990 and November 2014. The Population Intervention Comparison Outcomes Study Design (PICOS) framework was used for the analysis. From 1307 unique citations, 74 potentially relevant publications were identified; review of references identified 2 additional publications. Among the 76 publications, 18 published studies met the inclusion criteria. Most were retrospective in design. Ten studies reported clinical outcomes, including 1 prospective randomized trial and multiple retrospective analyses that reported a lower risk of bloodstream infection for MCBs compared with other delivery systems. Sixteen studies reported ergonomic and/or economic outcomes; most reported a potential cost benefit for MCBs, with consistent reports of reduced time and labor compared with other systems. The largest cost benefit was observed in studies evaluating total hospitalization costs. The systematic literature review identified evidence of potential clinical, ergonomic, and economic benefits for MCBs compared with COBs and MBSs; however, methodological factors limited evidence quality. More prospective studies are required to corroborate existing evidence.

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

PubMed Central

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

Assistive technology for ultrasound-guided central venous catheter placement.

PubMed

Ikhsan, Mohammad; Tan, Kok Kiong; Putra, Andi Sudjana

2018-01-01

This study evaluated the existing technology used to improve the safety and ease of ultrasound-guided central venous catheterization. Electronic database searches were conducted in Scopus, IEEE, Google Patents, and relevant conference databases (SPIE, MICCAI, and IEEE conferences) for related articles on assistive technology for ultrasound-guided central venous catheterization. A total of 89 articles were examined and pointed to several fields that are currently the focus of improvements to ultrasound-guided procedures. These include improving needle visualization, needle guides and localization technology, image processing algorithms to enhance and segment important features within the ultrasound image, robotic assistance using probe-mounted manipulators, and improving procedure ergonomics through in situ projections of important information. Probe-mounted robotic manipulators provide a promising avenue for assistive technology developed for freehand ultrasound-guided percutaneous procedures. However, there is currently a lack of clinical trials to validate the effectiveness of these devices.

Promoting Healthy Backs in Schools an Evaluative Study

ERIC Educational Resources Information Center

Springett, Angela G.; Wise, Joyce E. M.

2007-01-01

Purpose: The purpose of this paper is to evaluate the impact of educating adolescents in practical ways of looking after their backs to reduce the incidence of back-pain, with particular focus on the use and carrying method of ergonomically designed schoolbags. Design/methodology/approach: An educational leaflet containing a range of back care…

Organizational Approach to the Ergonomic Examination of E-Learning Modules

ERIC Educational Resources Information Center

Lavrov, Evgeniy; Kupenko, Olena; Lavryk, Tetiana; Barchenko, Natalia

2013-01-01

With a significant increase in the number of e-learning resources the issue of quality is of current importance. An analysis of existing scientific and methodological literature shows the variety of approaches, methods and tools to evaluate e-learning materials. This paper proposes an approach based on the procedure for estimating parameters of…

The process of aging: A case study approach implementing an ergonomics evaluation of the built environment for the elderly in Brazil.

PubMed

Paiva, Marie; Ferrer, Nicole; Villarouco, Vilma

2015-01-01

The phenomenon of aging is increasing worldwide. Various problems accompany it since aging makes the elderly undergo a decline in their natural functions. As such, senility can present itself as a barrier for everyday activities. This article presents a research that deals with the study of collective residences for the elderly. It seeks to identify configurations of these homes by seeking shortcomings and/or successful solutions. The Ergonomic Methodology for the Built Environment was applied. The method of the approach is qualitative and consists of multi-case study. Through the methodological approach, conflicts in the environment created by missing or inadequate elements were identified. Also, the opinions and suggestions from the elderly were analyzed, which shows their perception of the environment in use. The situations detected in this study indicate the occurrence of problems, exacerbated by the multiple deficiencies found in the user population of the environments analyzed. Thus it highlights the importance of there being future studies that are better targeted on designing environments for the elderly.

Ergonomics, safety, and resilience in the helicopter offshore transportation system of Campos Basin.

PubMed

Gomes, José Orlando; Huber, Gilbert J; Borges, Marcos R S; de Carvalho, Paulo Victor R

2015-01-01

Air transportation of personnel to offshore oil platforms is one of the major hazards of this kind of endeavor. Pilot performance is a key factor in the safety of the transportation system. This study seeks to identify the ergonomic factors present in pilots' activities that may in some way compromise or enhance their performance, the constraints and affordances which they are subject to; and where possible to link these to their associated risk factors. Methodology adopted in this project studies work in its context. It is a merging of Activity Analysis (Guerin et al. 2001) of European tradition with Cognitive Task Analysis (CTA - www.ctaresource.com) articulated with the recent approaches to cognitive systems engineering developed by Professors David Woods and Erik Hollnagel. Fifty-five hours of field interviews provided the input for analysis. Sixteen ergonomic constraints were identified, some cognitive, some physical, all considered relevant by the research subjects and expert advisers. Although the safety record of the personnel transportation system studied is considered acceptable, there is low hanging fruit to be picked which can help improve the system's safety.

A literature review on optimum and preferred joint angles in automotive sitting posture.

PubMed

Schmidt, Susanne; Amereller, Maximilian; Franz, Matthias; Kaiser, Ralf; Schwirtz, Ansgar

2014-03-01

In this study, a survey of the scientific literature in the field of optimum and preferred human joint angles in automotive sitting posture was conducted by referring to thirty different sources published between 1940 and today. The strategy was to use only sources with numerical angle data in combination with keywords. The aim of the research was to detect commonly used joint angles in interior car design. The main analysis was on data measurement, usability and comparability of the different studies. In addition, the focus was on the reasons for the differently described results. It was found that there is still a lack of information in methodology and description of background. Due to these reasons published data is not always usable to design a modern ergonomic car environment. As a main result of our literature analysis we suggest undertaking further research in the field of biomechanics and ergonomics to work out scientific based and objectively determined "optimum" joint angles in automotive sitting position. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics in office-based surgery: a survey-guided observational study.

PubMed

Esser, Adam C; Koshy, James G; Randle, Henry W

2007-11-01

The practice of office-based surgery is increasing in many specialties. Using Mohs surgery as a model, we investigated the role of ergonomics in office-based surgery to limit work-related musculoskeletal disorders. All Mayo Clinic surgeons currently performing Mohs surgery and Mohs surgeons trained at Mayo Clinic between 1990 and 2004 received a questionnaire survey between May 2003 and September 2004. A sample of respondents were videotaped during surgery. The main outcome measures were survey responses and an ergonomist's identification of potential causes of musculoskeletal disorders. All 17 surgeons surveyed responded. Those surveyed spend a mean of 24 hours per week in surgery. Sixteen said they had symptoms caused by or made worse by performing surgery. Symptom onset occurred on average at age 35.4 years. The most common complaints were pain and stiffness in the neck, shoulders, and lower back and headaches. Videotapes of 6 surgeons revealed problems with operating room setup, awkward posture, forceful exertion, poor positioning, lighting, and duration of procedures. Symptoms of musculoskeletal injuries are common and may begin early in a physician's career. Modifying footwear, flooring, table height, operating position, lighting, and surgical instruments may improve the ergonomics of office-based surgery.

Advances in Human-Computer Interaction: Graphics and Animation Components for Interface Design

NASA Astrophysics Data System (ADS)

Cipolla Ficarra, Francisco V.; Nicol, Emma; Cipolla-Ficarra, Miguel; Richardson, Lucy

We present an analysis of communicability methodology in graphics and animation components for interface design, called CAN (Communicability, Acceptability and Novelty). This methodology has been under development between 2005 and 2010, obtaining excellent results in cultural heritage, education and microcomputing contexts. In studies where there is a bi-directional interrelation between ergonomics, usability, user-centered design, software quality and the human-computer interaction. We also present the heuristic results about iconography and layout design in blogs and websites of the following countries: Spain, Italy, Portugal and France.

Human factors and ergonomics for primary care.

PubMed

Bowie, Paul; Jeffcott, Shelly

2016-03-01

In the second paper of this series, we provide a brief overview of the scientific discipline of human factors and ergonomics (HFE). Traditionally the HFE focus in healthcare has been in acute hospital settings which are perceived to exhibit characteristics more similar to other high-risk industries already applying related principles and methods. This paper argues that primary care is an area which could benefit extensively from an HFE approach, specifically in improving the performance and well-being of people and organisations. To this end, we define the purpose of HFE, outline its three specialist sub-domains (physical, cognitive and organisational HFE) and provide examples of guiding HFE principles and practices. Additionally, we describe HFE issues of significance to primary care education, improvement and research and outline early plans for building capacity and capability in this setting.

Camouflage design and head measurement characteristic of Indonesian armoured vehicle helmet

NASA Astrophysics Data System (ADS)

Sya'bana, Yukhi Mustaqim Kusuma; Sanjaya, K. H.

2017-01-01

In this paper discussed camouflage design helmet for armored vehicles with comparing head measurement of Indonesian anthropometric. Design process conduct with considering of design aspects involves function, materials, operational, technology, user, and appearance (camouflage). As an application of Indonesian National Army that qualifies factors needs: safety, comfort, practical and service. MIL-H-44099A Military Specification: Helmet, Ground Troops And Parachutists is minimum limitation standard of military helmet production. Head measurement for product design process guide is presented. Model simulation and helmet measurement using the design for ego and design for more types ergonomics concept. Appearance shape concept is engaging camouflage towards background and environment to deceive enemy viewpoint. Helmet prototype has tested ergonomically to an Indonesian National Army soldier and stated that the helmet size is a comfort and fitted on the head when in use.

Allowing for MSD prevention during facilities planning for a public service: an a posteriori analysis of 10 library design projects.

PubMed

Bellemare, Marie; Trudel, Louis; Ledoux, Elise; Montreuil, Sylvie; Marier, Micheline; Laberge, Marie; Vincent, Patrick

2006-01-01

Research was conducted to identify an ergonomics-based intervention model designed to factor in musculoskeletal disorder (MSD) prevention when library projects are being designed. The first stage of the research involved an a posteriori analysis of 10 recent redesign projects. The purpose of the analysis was to document perceptions about the attention given to MSD prevention measures over the course of a project on the part of 2 categories of employees: librarians responsible for such projects and personnel working in the libraries before and after changes. Subjects were interviewed in focus groups. Outcomes of the analysis can guide our ergonomic assessment of current situations and contribute to a better understanding of the way inclusion or improvement of prevention measures can support the workplace design process.

RD and A Management Guide, 12th Edition (Revision)

DTIC Science & Technology

1993-02-01

systems, types of aircraft; and astronautic publication and printing matters. vehicles. 6000 Series-Medicine and Dentistry . Medical 16000 Series-Coast...medicine, used by Navy or Marine Corps activities. dentistry , and medical equipment and supplies. 7000 Series-Financial Management. Financial C9.2...decisions development facilities. D-4 D4.2 Each center gathers information in its Crew Systems Ergonomics Information specialized area of interest

Suitability of healthcare robots for a dementia unit and suggested improvements.

PubMed

Robinson, Hayley; MacDonald, Bruce A; Kerse, Ngaire; Broadbent, Elizabeth

2013-01-01

To investigate the suitability of a new eldercare robot (Guide) for people with dementia and their caregivers compared with one that has been successfully used before (Paro), and to generate suggestions for improved robot enhanced dementia care. Cross-sectional study. A researcher demonstrated both robots in a random order to each staff member alone, or to each resident together with his/her relative(s). The researcher encouraged the participants to interact with each robot and asked staff and relatives a series of open ended questions about each robot. A secure dementia residential facility in Auckland, New Zealand. Ten people with dementia and 11 of their relatives, and five staff members. Each robot interaction was video-taped and coded for the number of times the resident looked at, smiled, touched, and talked to and about each robot, as well as relative interactions with the resident. Qualitative analysis was used to code the open ended questions. Residents smiled, touched and talked to Paro significantly more than Guide. Paro was found to be more acceptable to family members, staff, and residents, although many acknowledged that Guide had the potential to be useful if adapted for this population in terms of ergonomics and simplification. Healthcare robots in dementia settings have to be simple and easy to use as well as stimulating and entertaining. This research highlights how eldercare robots may be adapted to have the best effects in dementia settings. It is concluded that Paro's sounds could be modified to be more acceptable to this population. The ergonomic design of Guide could be reviewed and the software application could be simplified and targeted to people with dementia. Copyright © 2013 American Medical Directors Association, Inc. Published by Elsevier Inc. All rights reserved.

Understanding the visual skills and strategies of train drivers in the urban rail environment.

PubMed

Naweed, Anjum; Balakrishnan, Ganesh

2014-01-01

Due to the growth of information in the urban rail environment, there is a need to better understand the ergonomics profile underpinning the visual behaviours in train drivers. The aim of this study was to examine the tasks and activities of urban/metropolitan passenger train drivers in order to better understand the nature of the visual demands in their task activities. Data were collected from 34 passenger train drivers in four different Australian states. The research approach used a novel participative ergonomics methodology that fused interviews and observations with generative tools. Data analysis was conducted thematically. Results suggested participants did not so much drive their trains, as manage the intensity of visually demanding work held in their environment. The density of this information and the opacity of the task, invoked an ergonomics profile more closely aligned with diagnostic and error detection than actual train regulation. The paper discusses the relative proportion of strategies corresponding with specific tasks, the visual-perceptual load in substantive activities, and the requisite visual skills behoving navigation in the urban rail environment. These findings provide the basis for developing measures of complexity to further specify the visual demands in passenger train driving.

Quantitative modelling in cognitive ergonomics: predicting signals passed at danger.

PubMed

Moray, Neville; Groeger, John; Stanton, Neville

2017-02-01

This paper shows how to combine field observations, experimental data and mathematical modelling to produce quantitative explanations and predictions of complex events in human-machine interaction. As an example, we consider a major railway accident. In 1999, a commuter train passed a red signal near Ladbroke Grove, UK, into the path of an express. We use the Public Inquiry Report, 'black box' data, and accident and engineering reports to construct a case history of the accident. We show how to combine field data with mathematical modelling to estimate the probability that the driver observed and identified the state of the signals, and checked their status. Our methodology can explain the SPAD ('Signal Passed At Danger'), generate recommendations about signal design and placement and provide quantitative guidance for the design of safer railway systems' speed limits and the location of signals. Practitioner Summary: Detailed ergonomic analysis of railway signals and rail infrastructure reveals problems of signal identification at this location. A record of driver eye movements measures attention, from which a quantitative model for out signal placement and permitted speeds can be derived. The paper is an example of how to combine field data, basic research and mathematical modelling to solve ergonomic design problems.

Development of a program logic model and evaluation plan for a participatory ergonomics intervention in construction.

PubMed

Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

2014-03-01

Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. © 2013 Wiley Periodicals, Inc.

Development of a Program Logic Model and Evaluation Plan for a Participatory Ergonomics Intervention in Construction

PubMed Central

Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

2013-01-01

Background Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. Methods In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. Results The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Conclusions Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. PMID:24006097

Navy Research, Development, and Acquisition Management Guide

DTIC Science & Technology

1993-02-01

the Coast Guard. Not to be medicine, special or preventive medicine, used by Navy or Marine Corps activities. dentistry , and medical equipment and...development facilities. D-4 D4.2 Each center gathers information in its Crew Systems Ergonomics Information specialized area of interest; reviews, analyzes...ocean facilities and to enhance the Marine Corps population, and on problems of fleet Seabees and the Marine Corps operational and field dentistry

Ergonomics Considerations in Microcomputing.

ERIC Educational Resources Information Center

Torok, Andrew G.

1984-01-01

Discusses evolution of ergonomics and development of computer ergonomics with its sub-fields of hardware ergonomics (user-equipment-related problems including workstation design); software ergonomics (problems in communication with computers); and peopleware ergonomics (psychological impact). Ergonomic features of VDTs, keyboards, and printers are…

A Cross-Analysis of the Mathematics Teacher's Activity: An Example in a French 10th-Grade Class

ERIC Educational Resources Information Center

Robert, Aline; Rogalski, Janine

2005-01-01

The purpose of this paper is to contribute to the debate about how to tackle the issue of "the teacher in the teaching/learning process", and to propose a methodology for analysing the teacher's activity in the classroom, based on concepts used in the fields of the didactics of mathematics as well as in cognitive ergonomics. This…

Hospital ergonomics: a qualitative study to explore the organizational and cultural factors.

PubMed

Hignett, Sue

2003-07-15

The primary objective was to identify the characteristics of the health care industry with respect to organizational and cultural factors and consider how these might impact on the practice of ergonomics. Qualitative methodology was chosen as a suitable approach. This was supported by a middle ground philosophical position. Twenty-one interviews were carried out with academics and practitioners using a questionnaire proforma which developed iteratively over the 18 months of the project. A progressive four stage sampling strategy was used starting with purposive sampling to spread the net. Suggested contacts were then followed up (snowball sampling), before the third stage of intensity sampling to focus on participants with specific experience in hospital ergonomics. A final strategy of analysis sampling sought extreme and deviant cases to achieve theoretical saturation. The analysis resulted in three categories: organizational, staff and patient issues. The organizational issues included both the size and complexity of the National Health Service. For example, three hierarchical lines were identified in the management structure: an administrative line, a professional line and a patient-focused clinical management line. One of the surprising findings for the staff issues was the perceived lack of ergonomic information about female workers as a population group and traditional female employment sectors. The patient issues incorporated three dimensions associated with the caring role: the type of work; expectations; and possible outcomes. The work tends to be dirty and emotional, with a professional subculture to allow the handling of other peoples' bodies. This subculture was linked to a 'coping' attitude where staff put the patients' needs and well-being before their own. The change in patient expectations (from being apologetic through to demanding their rights) is mirrored in a changing model of care from paternalism to partnership. A lack of ergonomic research was identified for female workers in the health care industry relating to both the type of work and gender issues.

Workplace-Based Rehabilitation of Upper Limb Conditions: A Systematic Review.

PubMed

Hoosain, Munira; de Klerk, Susan; Burger, Marlette

2018-05-23

Purpose The objective of this systematic review was to identify, collate and analyse the current available evidence on the effectiveness of workplace-based rehabilitative interventions in workers with upper limb conditions on work performance, pain, absenteeism, productivity and other outcomes. Methods We searched Medline, Cochrane Library, Scopus, Web of Science, Academic Search Premier, Africa-Wide Information, CINAHL, OTSeeker and PEDro with search terms in four broad areas: upper limb, intervention, workplace and clinical trial (no date limits). Studies including neck pain only or musculoskeletal pain in other areas were not included. Results Initial search located 1071 articles, of which 80 were full text reviewed. Twenty-eight articles were included, reporting on various outcomes relating to a total of seventeen studies. Nine studies were of high methodological quality, seven of medium quality, and one of low quality. Studies were sorted into intervention categories: Ergonomic controls (n = 3), ergonomic training and workstation adjustments (n = 4), exercise and resistance training (n = 6), clinic-based versus workplace-based work hardening (n = 1), nurse case manager training (n = 1), physiotherapy versus Feldenkrais (n = 1), and ambulant myofeedback training (n = 1). The largest body of evidence supported workplace exercise programs, with positive effects for ergonomic training and workstation adjustments, and mixed effects for ergonomic controls. Ambulant myofeedback training had no effect. The remaining three categories had positive effects in the single study on each intervention. Conclusion While there is substantial evidence for workplace exercise programs, other workplace-based interventions require further high quality research. Systematic review registration PROSPERO CRD42017059708.

Old scissors to industrial automation: the impact of technologic evolution on worker's health.

PubMed

Teodoroski, Rita de Cassia Clark; Koppe, Vanessa Mazzocchi; Merino, Eugênio Andrés Díaz

2012-01-01

To cut a fabric, the professional performs different jobs and among them stands out the cut. The scissors has been the instrument most used for this activity. Over the years, technology has been conquering its space in the textile industry. However, despite the industrial automation able to offer subsidies to answer employment market demands, without appropriate orientation, the worker is exposed to the risks inherent at the job. Ergonomics is a science that search to promote the comfort and well being in consonance with efficacy. Its goals are properly well defined and clearly guide the actions aimed at transforming the working conditions. This study aimed to analyze the activity of cut tissues with a machine by a seamstress and the implications on their body posture. The methodology used was the observation technique and application of the Protocol RULA, where the result obtained was the level 3 and score 5, confirming that "investigations and changes are required soon". Conclude that using the machine to tissue cut should be encouraged, but in conjunction with orientations for improving posture while handling it. It seeks to prevent dysfunction of the musculoskeletal system that prevents employees from performing their work tasks efficiently and productively.

A maintenance time prediction method considering ergonomics through virtual reality simulation.

PubMed

Zhou, Dong; Zhou, Xin-Xin; Guo, Zi-Yue; Lv, Chuan

2016-01-01

Maintenance time is a critical quantitative index in maintainability prediction. An efficient maintenance time measurement methodology plays an important role in early stage of the maintainability design. While traditional way to measure the maintenance time ignores the differences between line production and maintenance action. This paper proposes a corrective MOD method considering several important ergonomics factors to predict the maintenance time. With the help of the DELMIA analysis tools, the influence coefficient of several factors are discussed to correct the MOD value and the designers can measure maintenance time by calculating the sum of the corrective MOD time of each maintenance therbligs. Finally a case study is introduced, by maintaining the virtual prototype of APU motor starter in DELMIA, designer obtains the actual maintenance time by the proposed method, and the result verifies the effectiveness and accuracy of the proposed method.

Macroergonomic study of food sector company distribution centres.

PubMed

García Acosta, Gabriel; Lange Morales, Karen

2008-07-01

This study focussed on the work system design to be used by a Colombian food sector company for distributing products. It considered the concept of participative ergonomics, where people from the commercial, logistics, operation, occupational health areas worked in conjunction with the industrial designers, ergonomists who methodologically led the project. As a whole, the project was conceived as having five phases: outline, diagnosis, modelling the process, scalability, instrumentation. The results of the project translate into procedures for selecting, projecting a new distribution centre, the operational process model, a description of ergonomic systems that will enable specific work stations to be designed, the procedure for adapting existing warehouses. Strategically, this work helped optimise the company's processes and ensure that knowledge would be transferred within it. In turn, it became a primary prevention strategy in the field of health, aimed at reducing occupational risks, improving the quality of life at work.

Acessibility in collective housing for the elderly: a case study in Portugal.

PubMed

Paiva, Marie Monique Bruère; Villarouco, Vilma

2012-01-01

Physical spaces need to be adjusted to suit the changes of a physical, cognitive and emotional order occasioned by the natural aging of people. Ergonomics of the built environment contributes to improving the interaction of the user and physical environment, with a view to their comfort and safety. By thinking through the influence that environments have on the quality of life of the elderly, this article presents an assessment of accessibility in private units--bedrooms and bathrooms--of a Long-Stay Institution for the Elderly (ILPI in Portuguese) in Portugal. The analysis of the physical and spatial conditioning factors by means of the Ergonomics Methodology for the Built Environment (EMBE), proposed by VILLAROUCO (2008), gave evidence of the need for interventions to suitably adapt physical infrastructure, with the objective of promoting the physical well-being of the elderly, and thus, enhancing the autonomy and independence of a wider range of users.

A theoretical framework for negotiating the path of emergency management multi-agency coordination.

PubMed

Curnin, Steven; Owen, Christine; Paton, Douglas; Brooks, Benjamin

2015-03-01

Multi-agency coordination represents a significant challenge in emergency management. The need for liaison officers working in strategic level emergency operations centres to play organizational boundary spanning roles within multi-agency coordination arrangements that are enacted in complex and dynamic emergency response scenarios creates significant research and practical challenges. The aim of the paper is to address a gap in the literature regarding the concept of multi-agency coordination from a human-environment interaction perspective. We present a theoretical framework for facilitating multi-agency coordination in emergency management that is grounded in human factors and ergonomics using the methodology of core-task analysis. As a result we believe the framework will enable liaison officers to cope more efficiently within the work domain. In addition, we provide suggestions for extending the theory of core-task analysis to an alternate high reliability environment. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Safety, tolerability and effectiveness of an ergonomic intervention with chiropractic care for knowledge workers with upper-extremity musculoskeletal disorders: a prospective case series.

PubMed

Sherrod, Chuck; Johnson, Dale; Chester, Bruce

2014-01-01

One hundred and sixty million office workers (knowledge workers) in the U.S. and 2/3 of the developed countries use computers on a daily basis. Investigate the effectiveness of ergonomic and diversified chiropractic care for the reduction of pain, discomfort and impaired productivity in knowledge workers presenting with neck and upper extremity musculoskeletal complaints. A one-year prospective case series (n=5 applying ergonomic job task analyses and ongoing surveillance at baseline, 8 weeks, 16 weeks and one-year for musculoskeletal discomfort (CMDQ and VAS, quality of life (Rand SF-36, productivity and forward head posture (FHP). CMDQ and VAS scores decreased by 45% (neck) and 80% (upper extremities); productivity increased from 65% to 100%; physical functioning, role physical and role emotional improved for 4 of 5 subjects; body pain and general health improved for 3 of 5. Average FHP changed from 1-inch (baseline) to 1/4-inch (16-weeks) to 1/2-inch (one year). Effectiveness of this intervention for the reduction of risks depended upon the subject's adoption of safe workstyle behaviors and postures. A transtheoretical model (TTM) for behavior change is discussed as a possible methodology to enhance the adoption of safer work habits.

Avionics Collaborative Engineering Technology Delivery Order 0035: Secure Knowledge Management (SKM) Technology Research Roadmap - Technology Trends for Collaborative Information and Knowledge Management Research

DTIC Science & Technology

2004-06-01

such as that represented in the know-how of the master craftsman), and cognitive (know why, perceptions, values, beliefs, and mental models).4... cognitive engineering, educational technology, industrial/organizational psychology, sociology, cultural anthropology, and computational...such as human-human interaction, interface design and evaluation methodology, cognitive models and user models, health and ergonomic studies, empirical

Air traffic control system baseline methodology guide.

DOT National Transportation Integrated Search

1999-06-01

The Air Traffic Control System Baseline Methodology Guide serves as a reference in the design and conduct of baseline studies. : Engineering research psychologists are the intended audience for the Methodology Guide, which focuses primarily on techni...

Determinants of business sustainability: an ergonomics perspective.

PubMed

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human performance issues, a combined macro-micro ergonomic methodology is essential to solve the productivity, quality and safety issues impacting employees along the trajectory or path of the enterprise-wide work process. In this study, the symptoms associated with human performance issues in one production department work process had root causes originating in the customer service department work process. In fact, the issues found in the customer service department caused performance problems elsewhere in the enterprise-wide work process such as the traffic department. Sustainable enterprise solutions for workplace human performance require the integration of macro- and micro-ergonomic approaches.

Ergonomics: A Commonsense Activity That Can Save Schools Money.

ERIC Educational Resources Information Center

Fleer, Paul; Gauthier-Green, Erin

2002-01-01

Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

PubMed

Long, Jennifer; Long, Airdrie

2012-01-01

Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

Evaluation of Musculoskeletal Disorders in Dentists and Application of DMAIC Technique to Improve the Ergonomics at Dental Clinics and Meta-Analysis of Literature.

PubMed

Bedi, H S; Moon, Ninad Joshirao; Bhatia, Vineet; Sidhu, Gagandeep Kaur; Khan, Nadia

2015-06-01

Musculoskeletal disorders (MSD) result in discomfort, pain and illness that can result in disruption or impairment of dental practice. A cross-sectional study consisting of 60 dentists was carried out to determine musculoskeletal work related pain in major cities of Northern India. The study was planned in two phases. In the first phase, the subjects were given questionnaire related to the musculoskeletal pain happened over the last twelve months. In the second phase of study, improvement was carried out by recommending the subjects to implement ergonomics at their workplace. After three months subjects were again approached and given questionnaire about the musculoskeletal disorders. DMAIC (define, measure, analyse, improve and control) methodology of six sigma strategy was used to access the MSDs. Chi-square test was used for the analysis and a p-value of less than or equal to 0.05 was considered statistically significant. The overall prevalence of musculoskeletal problems in the present study was found to be 68.3%. After three months only 23 respondents applied ergonomics at their work place, prevalence of pain was reduced in neck from 47.8% to 21.7% out of total 23 respondents, shoulder pain 39.1% to 17.3%, pain in elbows from 26% to 21.7%, as well as in other locomotor organs. The p-value was significant with p <0.05. MSD represents a major occupational health issue for dentists in India as well as worldwide and result revealed necessitates the need of workshops to create awareness of ergonomics as effective measures for reducing MSD among dentists.

Evaluation of Musculoskeletal Disorders in Dentists and Application of DMAIC Technique to Improve the Ergonomics at Dental Clinics and Meta-Analysis of Literature

PubMed Central

Bedi, H.S.; Moon, Ninad Joshirao; Bhatia, Vineet; Khan, Nadia

2015-01-01

Introduction Musculoskeletal disorders (MSD) result in discomfort, pain and illness that can result in disruption or impairment of dental practice. Materials and Methods A cross-sectional study consisting of 60 dentists was carried out to determine musculoskeletal work related pain in major cities of Northern India. The study was planned in two phases. In the first phase, the subjects were given questionnaire related to the musculoskeletal pain happened over the last twelve months. In the second phase of study, improvement was carried out by recommending the subjects to implement ergonomics at their workplace. After three months subjects were again approached and given questionnaire about the musculoskeletal disorders. DMAIC (define, measure, analyse, improve and control) methodology of six sigma strategy was used to access the MSDs. Chi-square test was used for the analysis and a p-value of less than or equal to 0.05 was considered statistically significant. Results The overall prevalence of musculoskeletal problems in the present study was found to be 68.3%. After three months only 23 respondents applied ergonomics at their work place, prevalence of pain was reduced in neck from 47.8% to 21.7% out of total 23 respondents, shoulder pain 39.1% to 17.3%, pain in elbows from 26% to 21.7%, as well as in other locomotor organs. The p-value was significant with p <0.05. Conclusion MSD represents a major occupational health issue for dentists in India as well as worldwide and result revealed necessitates the need of workshops to create awareness of ergonomics as effective measures for reducing MSD among dentists. PMID:26266205

Promoting healthy computer use among middle school students: a pilot school-based health promotion program.

PubMed

Ciccarelli, Marina; Portsmouth, Linda; Harris, Courtenay; Jacobs, Karen

2012-01-01

Introduction of notebook computers in many schools has become integral to learning. This has increased students' screen-based exposure and the potential risks to physical and visual health. Unhealthy computing behaviours include frequent and long durations of exposure; awkward postures due to inappropriate furniture and workstation layout, and ignoring computer-related discomfort. Describe the framework for a planned school-based health promotion program to encourage healthy computing behaviours among middle school students. This planned program uses a community- based participatory research approach. Students in Year 7 in 2011 at a co-educational middle school, their parents, and teachers have been recruited. Baseline data was collected on students' knowledge of computer ergonomics, current notebook exposure, and attitudes towards healthy computing behaviours; and teachers' and self-perceived competence to promote healthy notebook use among students, and what education they wanted. The health promotion program is being developed by an inter-professional team in collaboration with students, teachers and parents to embed concepts of ergonomics education in relevant school activities and school culture. End of year changes in reported and observed student computing behaviours will be used to determine the effectiveness of the program. Building a body of evidence regarding physical health benefits to students from this school-based ergonomics program can guide policy development on the healthy use of computers within children's educational environments.

Working conditions under multiple exposures: A cross-sectional study of private sector administrative workers.

PubMed

Coelho, Denis A; Tavares, Carla S D; Lourenço, Miguel L; Lima, Tânia M

2015-01-01

Office workers are increasingly exposed to physical and psychosocial risk factors. To assess the association between environmental, physical and organizational working conditions and the physical and psychosocial well-being of a sample of private sector office workers. Musculoskeletal pain was collected from a body map and the Disabilities of the Arms, Shoulders and Hands questionnaire. The short version of the Copenhagen Psychosocial Questionnaire enabled collecting information on six job related satisfaction and dissatisfaction subscales. A checklist for ergonomics in computer work guided the analysis of ergonomic factors and measurements were taken to characterize environmental conditions. Association between exposures and outcomes was calculated using IBM SPSS Statistics 20 software. Significant moderate positive association was found between dissatisfaction with job psychological demands and musculoskeletal pain in the upper body (0.40; p= 0.05), as well as between postural ergonomic mismatches and dissatisfaction with job insecurity towards the future (0.42; p= 0.04). A significant moderate negative association (-0,47; p= 0.02) was found as well between satisfaction with job social support and with leadership quality and location of the work station in an open-plan office as opposed to smaller office rooms. The results show how raising awareness of the risk factors encountered in contemporary office work is still necessary to promote widespread improvement of working conditions, from both a physical and a psychosocial perspective.

Ergonomic sustainability based on the ergonomic maturity level measurement.

PubMed

Vidal, Mario Cesar; Guizze, Carmen Lucia Campos; Bonfatti, Renato José; Silva e Santos, Marcello

2012-01-01

This paper aims at the application of an ergonomic maturity model (EMM), in order to assess the ergonomic sustainability outreach of ergonomic actions. This proposition was motivated by the widespread sensation that the development of the discipline, its educational devices and related practices depends on the attitude of ergonomics practitioners rather than environmental macroergonomic conditions. Maturity modeling in this paper is undertaken as a tool for ergonomic practitioners. Thus, its foundations were uprooted from diverse fields: Clinic Psychology, Quality Management and Project Management. The paper brings about a detailled explanation of this ergonomic maturity tool. The empirical part is fulfilled by the examination - using the EMM - of four emblematic cases excerpted from our research lab ergonomic portfolio.

A review and exploration of sociotechnical ergonomics.

PubMed

Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

2017-09-01

A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

An assessment system for rating scientific journals in the field of ergonomics and human factors.

PubMed

Dul, Jan; Karwowski, Waldemar

2004-05-01

A method for selecting and rating scientific and professional journals representing the discipline of ergonomics and human factors is proposed. The method is based upon the journal list, impact factors and citations provided by the Institute of Scientific Information (ISI), and the journal list published in the Ergonomics Abstracts. Three groups of journals were distinguished. The 'ergonomics journals' focus exclusively on ergonomics and human factors. The 'related journals' focus on other disciplines than ergonomics and human factors, but regularly publish ergonomics/human factors papers. The 'basic journals' focus on other technical, medical or social sciences than ergonomics, but are important for the development of ergonomics/human factors. Journal quality was rated using a maximum of four categories: top quality (A-level), high quality (B-level), good quality (C-level)) and professional (P-level). The above methods were applied to develop the Ergonomics Journal List 2004. A total of 25 'ergonomics journals', 58 'related journals' and 142 'basic journals' were classified.

Ergonomics contributions to company strategies.

PubMed

Dul, Jan; Neumann, W Patrick

2009-07-01

Managers usually associate ergonomics with occupational health and safety and related legislation, not with business performance. In many companies, these decision makers seem not to be positively motivated to apply ergonomics for reasons of improving health and safety. In order to strengthen the position of ergonomics and ergonomists in the business and management world, we discuss company strategies and business goals to which ergonomics could contribute. Conceptual models are presented and examples are given to illustrate: (1) the present situation in which ergonomics is not part of regular planning and control cycles in organizations to ensure business performance; and (2) the desired situation in which ergonomics is an integrated part of strategy formulation and implementation. In order to realize the desired situation, considerable changes must take place within the ergonomics research, education and practice community by moving from a health ergonomics paradigm to a business ergonomics paradigm, without losing the health and safety goals.

Incorporating organisational safety culture within ergonomics practice.

PubMed

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Practical question-and-answer guide on VDTS (video display terminals) for BEES (base bioenvironmental engineer). Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, B.M.

1985-01-01

The USAF OEHL conducted an extensive literature review of Video Display Terminals (VDTs) and the health problems commonly associated with them. The report is presented in a question-and-answer format in an attempt to paraphrase the most commonly asked questions about VDTs that are forwarded to USAF OEHL/RZN. The questions and answers have been divided into several topic areas: Ionizing Radiation; Nonionizing Radiation; Optical Radiation; Ultrasound; Static Electricity; Health Complaints/Ergonomics; Pregnancy.

Ergonomics, education and children: a personal view.

PubMed

Woodcock, A

2007-10-01

Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

PubMed

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

A Comprehensive Approach for the Ergonomic Evaluation of 13 Emergency and Transport Ventilators.

PubMed

Marjanovic, Nicolas; L'Her, Erwan

2016-05-01

Mechanical ventilation is an important part of emergency medicine and is frequently used for transportation. Human errors during ventilator settings are frequent and may be associated with high morbidity/mortality. The aim of the study was to provide a complete ergonomic evaluation of emergency and transport ventilators, taking into account objective and subjective human-machine interface assessments and individual mental work load. We performed a prospective bench ergonomic evaluation of 13 emergency and transport ventilators, using standardized conditions and a global methodological approach. The study was performed in an evaluation laboratory dedicated to respiratory care, and 12 emergency physicians unfamiliar with the tested devices were included in the evaluation. The ventilators were classified into 3 categories (simple, sophisticated, and ICU-like). Objective chronometric evaluations were conducted considering 9 tasks, and subjective evaluations were performed (ease of use, willingness to use, and user-friendliness of monitoring) using Likert scales. Mental work load evaluation was performed using the NASA Task Load Index scale. Overall task failure rate represented 4% of all attempts. Setting modifications, ventilation mode changes, and powering down durations were different between simple and other emergency and transport ventilator categories (P < .005). There was no difference between ventilator categories for the ease of use and user-friendliness of the monitoring. In contrast, the willingness to use was lower for simple devices, compared with sophisticated and ICU-like emergency and transport ventilators (2.9 ± 1.4 vs 3.9 ± 1.2, P = .002 and 4.3 ± 1, P < .001). No differences were observed between devices regarding the mental work load, except for several specific devices in the sophisticated category. A comprehensive ergonomic evaluation provides valuable information while investigating operational friendliness in emergency and transport ventilators. The choice of a device not only depends on its technical characteristics but should take into account its clinical operational setting and ergonomics in order to decrease mental work load. Sophisticated emergency and transport ventilators should only be used by clinicians who demonstrate expertise in mechanical ventilation. Copyright © 2016 by Daedalus Enterprises.

Load Handling and Repetitive Movements Are Associated with Chronic Low Back Pain among Jute Mill Workers in India

PubMed Central

Goswami, S.; Dasgupta, S.; Samanta, A.; Talukdar, G.; Chanda, A.; Ray Karmakar, P.; Bhattacharya, D.

2016-01-01

Introduction. WHO recognizes low back pain as one of the most important ergonomic stressors. Therefore, the present study was designed to find out the magnitude of the problem among jute mill workers in India and identify possible associations. Methodology. This cross-sectional workplace based study was conducted among eight (8) selected jute mills of India. Subjects with self-reported back pain for at least last 12 weeks were included and n = 717 male jute mill workers actively engaged in work entered the study and completed all assessments. Results. Among all participants 55% (n = 392) had current chronic low back pain. Age was an important association with subjects in the age group of 40–59 years more likely to have pain (p = 0.02, OR 1.44). Regarding ergonomic risk factors lifting of load of more than 20 kg (p = 0.04, OR 1.42) and repetitive movements of limbs (p = 0.03, OR 0.67) were significant associations of chronic low back pain. Conclusion. This study identified a significant prevalence of current chronic low back pain among jute mill workers. Regarding ergonomic risk factors the present study has identified two significant associations: lifting of load above 20 kg and repetitive movements of limbs. Therefore, this study has identified need for workplace interventions in this occupational group employing approximately 3,50,000 workers in India. PMID:27563463

Achieving LEED credit for ergonomics: Laying the foundation.

PubMed

Lynch, Mallory

2014-01-01

Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

PubMed

Woo, E H C; White, P; Lai, C W K

2016-03-01

This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

A case study detailing key considerations for implementing a telehealth approach to office ergonomics.

PubMed

Ritchie, Catherine L W; Miller, Linda L; Antle, David M

2017-01-01

Telehealth approaches to delivering ergonomics assessment hold great potential to improve service delivery in rural and remote settings. This case study describes a telehealth-based ergonomics service delivery process, and compares in-person and telehealth-based ergonomics approaches at an Alberta-based non-profit advocacy group. This project demonstrates that telehealth approaches to ergonomics do not lead to significantly different scoring outcomes for assessment of ergonomics issues, when compared to in-person assessments. This project also outlines the importance of live real-time video conferencing to improving communication, attaining key assessment information, and demonstrating ergonomic adjustments. However, some key considerations of bandwidth and hardware capabilities need to be taken into account. Key communication strategies are outlined to improve rapport, maintain employee confidentiality, and reduce client anxiety around telehealth ergonomics assessments. This project provides further support for telehealth approaches to office ergonomics, and outlines some key implementation strategies and barriers that should be considered.

Green ergonomics: definition and scope.

PubMed

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

PubMed

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Psychometric properties evaluation of a new ergonomics-related job factors questionnaire developed for nursing workers.

PubMed

Coluci, Marina Zambon Orpinelli; Alexandre, Neusa Maria Costa

2014-11-01

The objectives of this study were to develop a questionnaire that evaluates the perception of nursing workers to job factors that may contribute to musculoskeletal symptoms, and to evaluate its psychometric properties. Internationally recommended methodology was followed: construction of domains, items and the instrument as a whole, content validity, and pre-test. Psychometric properties were evaluated among 370 nursing workers. Construct validity was analyzed by the factorial analysis, known-groups technique, and convergent validity. Reliability was assessed through internal consistency and stability. Results indicated satisfactory fit indices during confirmatory factor analysis, significant difference (p < 0.01) between the responses of nursing and office workers, and moderate correlations between the new questionnaire and Numeric Pain Scale, SF-36 and WRFQ. Cronbach's alpha was close to 0.90 and ICC values ranged from 0.64 to 0.76. Therefore, results indicated that the new questionnaire had good psychometric properties for use in studies involving nursing workers. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

How do users design? The case of sugar cane harvester machines.

PubMed

Narimoto, Lidiane Regina; Camarotto, João Alberto

2017-01-01

Design in use and inventiveness are key concepts in ergonomics. It is well-known that users design but is not explored in the literature how they manage to do that. This paper aims to contribute to the discussion of how users actually design, by showing a research conducted in sugar cane harvesting in Brazil and in Australia. Through the methodology of the Ergonomic Work Analysis (EWA), the design modifications made by the harvesting teams were identified as well as their elaboration process. Three categories of modifications in machines' design were identified: structural, functional and operational and they were more numerous in Brazilian situations. It is proposed that two theories underlying the theme are intertwined: the instrument-mediated activity approach and the design as bricolage. It is argued that users design through the articulation of: a) the operators' activity, b) the mechanical technicians' inventory to practice bricolage as a way of designing and c) the work organisation and the existence of social spaces of interaction between these two subjects.

Seniors and technology, ergonomic needs and design considerations.

PubMed

Rodríguez, Claudia Isabel Rojas

2012-01-01

This work is based on the ergonomic approach and the principles of universal design, with the aim of establishing the cognitive design features that interfaces must comply, for older adults achieve a good performance during their interaction with technological aids. Describes the analysis of exploratory experiences with a group of 17 older adults was aimed first to establish the main barriers to implementation that arise during these activities, and secondly to set the variables to be addressed and the procedure required to develop depth study, where the relationship establish between the quality of the stimuli and the level of performance achieved in the implementation of older adults with interfaces, observing each of the cognitive functions that promote independence, attention, motivation, memory these processes. The study in depth, looking for describe gaps and mismatches encountered during execution, which hamper the harmonious interaction processes through participatory methodological approach that allows to specify requirements for the creation of stimulating interfaces for cognitive skills and committed with the levels of autonomy of the elderly.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk

PubMed Central

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

Objectives This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Methods Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Results Among 123jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Conclusion Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented. PMID:24142048

Expert assessment of physical ergonomics at video-display unit workstations: repeatability, validity and responsiveness to changes.

PubMed

Ketola, Ritva; Toivonen, Risto; Luukkonen, Ritva; Takala, Esa-Pekka; Viikari-Juntura, Eira

2004-08-01

Inter-observer repeatability, validity and responsiveness to change were determined for an expert assessment method for video-display unit (VDU) workstation ergonomics. The aim was to determine to what extent the expert assessment of ergonomics is related to the technical measurements, tidiness and space, work chair ergonomics and responds to changes in these characteristics. Technical measurements and video-recordings before and 2 months after an ergonomic intervention were made for 109 VDU office workstations. Two experts in ergonomics analysed and rated the ergonomics of the workstations. A researcher analysed tidiness and available space. A physiotherapist classified the work chairs used according to their ergonomic properties. The intra-class correlation coefficient between the workstation ergonomic ratings of the two experts was 0.74 at the baseline and 0.81 at the follow-up. Workstation tidiness and space, and work chair ergonomics, had a strong effect on the assessments of both experts. For both experts a change in the locations of the mouse, the screen and the keyboard and values of tidiness and space and work chair ergonomics during the intervention showed a significant association with the ratings. The assessment method studied can be utilized by an expert in a repeatable manner both in cross-sectional and in longitudinal settings.

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks.

PubMed

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen; Holtermann, Andreas; Madeleine, Pascal

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p < 0.05). The study highlighted the multiple musculoskeletal and cardiovascular benefits of following ergonomics guidelines during cleaning tasks. This study investigated the effects of following instructive ergonomics guidelines during cleaning tasks (daily curriculum of cleaning including mopping, sweeping, changing trash bins and cleaning of desks and blackboards). Following the ergonomics guidelines reduces the general workload and induces a more complex pattern of muscular activity. The study contributes with novel knowledge concerning ergonomics guidelines and work techniques.

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry.

PubMed

Neubert, Nicole; Bruder, Ralph; Toledo, Begoña

2012-01-01

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.

An investigation of low ergonomics risk awareness, among staffs at early product development phase in Malaysia automotive industries

NASA Astrophysics Data System (ADS)

Aziz, Fazilah Abdul; Razali, Noraini; Najmiyah Jaafar, Nur

2016-02-01

Currently there are many automotive companies still unable to effectively prevent consequences of poor ergonomics in their manufacturing processes. This study purpose is to determine the surrounding factors that influence low ergonomics risk awareness among staffs at early product development phase in Malaysia automotive industry. In this study there are four variables, low ergonomic risk awareness, inappropriate method and tools, tight development schedule and lack of management support. The survey data were gathered from 245 respondents of local automotive companies in Malaysia. The data was analysed through multiple regression and moderated regression using the IBM SPSS software. Study results revealed that low ergonomic risk awareness has influenced by inappropriate method and tool, and tight development schedule. There were positive linear relationships between low ergonomic risk awareness and inappropriate method and tools, and tight development schedule. The more inappropriate method and tools applied; the lower their ergonomic risk awareness. The more tight development schedule is the lower ergonomic risk awareness. The relationship between low ergonomic risk awareness and inappropriate method and tools depends on staff's age, and education level. Furthermore the relationship between low ergonomic risk awareness and tight development schedule depends on staff's working experience and number of project involvement. The main contribution of this paper was identified the number of factors of low ergonomics risk awareness and offers better understanding on ergonomics among researchers and automotive manufacturer's employees during product development process.

Advanced Technologies in Safe and Efficient Operating Rooms

DTIC Science & Technology

2009-02-01

parameters and sitting strategies to determine car seat design that is both comfortable and ergonomically sound.8 The study of ergonomics in the surgical...off stereo into a prototype endoscope and developed design concepts for visualization techniques based on principles of cognitive ergonomics ...results from simultaneous task performance—is typical of knowledge ascertained through ergonomic clinical research.6 Ergonomic theory, design , and

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

PubMed Central

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

Ergonomics in the operating room: protecting the surgeon.

PubMed

Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

2013-01-01

To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Knowledge, attitude, and practice towards ergonomics among undergraduates of Faculty of Dentistry, Tanta University, Egypt.

PubMed

El-Sallamy, Rania M; Atlam, Salwa A; Kabbash, Ibrahim; El-Fatah, Sanaa Abd; El-Flaky, Asmaa

2017-02-23

Ergonomics is the scientific study of people and their working environment. Dentistry is a profession that generally produces various musculoskeletal disorders. If ergonomic principles are applied in the field of dentistry, it helps to prevent occupational ergonomic health hazards and provides more comfort to the dentist and patient. To assess knowledge, attitudes, and practice of ergonomics during routine dental procedures among undergraduates of Faculty of Dentistry, Tanta University, cross-sectional study was conducted among dental students of Tanta University during the year 2015-2016 using a predesigned selfadministered questionnaire. Knowledge, attitude, and practice were assessed by 16, 5, and 6 questions, respectively. The study included 479 dental students, of them, 291 (60.8%) were females, 359 (74.9%) were from urban areas, and 359 students (74.9%) were 22 years old and below. Only one quarter of the students had good knowledge whereas nearly half of the students (48.9%) had fair knowledge concerning ergonomics. Out of the participants, 84.8% had positive attitudes and 95.4% had poor practice of ergonomics. Only 48.9% of the studied students had fair knowledge regarding ergonomics; also 5% only of students practice it. But about 84.8% of students have a positive attitude towards studying ergonomics. Dental students need to ensure involving ergonomics in the routine dental practice. This may be achieved via addition of ergonomics in their curriculum.

Participatory ergonomics intervention in an industrially developing country--a case study.

PubMed

Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

2008-01-01

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

PubMed

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Translating concepts of complexity to the field of ergonomics.

PubMed

Walker, Guy H; Stanton, Neville A; Salmon, Paul M; Jenkins, Daniel P; Rafferty, Laura

2010-10-01

Since 1958 more than 80 journal papers from the mainstream ergonomics literature have used either the words 'complex' or 'complexity' in their titles. Of those, more than 90% have been published in only the past 20 years. This observation communicates something interesting about the way in which contemporary ergonomics problems are being understood. The study of complexity itself derives from non-linear mathematics but many of its core concepts have found analogies in numerous non-mathematical domains. Set against this cross-disciplinary background, the current paper aims to provide a similar initial mapping to the field of ergonomics. In it, the ergonomics problem space, complexity metrics and powerful concepts such as emergence raise complexity to the status of an important contingency factor in achieving a match between ergonomics problems and ergonomics methods. The concept of relative predictive efficiency is used to illustrate how this match could be achieved in practice. What is clear overall is that a major source of, and solution to, complexity are the humans in systems. Understanding complexity on its own terms offers the potential to leverage disproportionate effects from ergonomics interventions and to tighten up the often loose usage of the term in the titles of ergonomics papers. STATEMENT OF RELEVANCE: This paper reviews and discusses concepts from the study of complexity and maps them to ergonomics problems and methods. It concludes that humans are a major source of and solution to complexity in systems and that complexity is a powerful contingency factor, which should be considered to ensure that ergonomics approaches match the true nature of ergonomics problems.

'1966 and all that': Trends and developments in UK ergonomics during the 1960s.

PubMed

Waterson, Patrick; Eason, Ken

2009-11-01

The 1960s represents a key decade in the expansion of ergonomics within the UK. This paper reviews trends and developments that emerged out of the 1960s and compares these with ergonomics research and practice today. The focus in particular is on the expansion of ergonomics as a discipline within industry, as well as more specific topics, such as the emergence of areas of interest, for example, computers and technology, automation and systems ergonomics and consumer ergonomics. The account is illustrated with a detailed timeline of developments, a set of industrial case studies and the contents of important publications during the decade. A key aim of the paper is to provide the opportunity to reflect on the past and the implications this may have for future directions for ergonomics within the UK. The paper provides practitioners with an insight into the development of ergonomics in the UK during one of the most important decades of its history. This is especially relevant given the fact that in 2009 the Ergonomics Society celebrates its 60th anniversary.

Ergonomics observation: Harvesting tasks at oil palm plantation.

PubMed

Ng, Yee Guan; Shamsul Bahri, Mohd Tamrin; Irwan Syah, Md Yusoff; Mori, Ippei; Hashim, Zailina

2014-01-01

Production agriculture is commonly associated with high prevalence of ergonomic injuries, particularly during intensive manual labor and during harvesting. This paper intends to briefly describe an overview of oil palm plantation management highlighting the ergonomics problem each of the breakdown task analysis. Although cross-sectional field visits were conducted in the current study, insight into past and present occupational safety and health concerns particularly regarding the ergonomics of oil palm plantations was further exploited. Besides discussion, video recordings were extensively used for ergonomics analysis. The unique commodity of oil palm plantations presents significantly different ergonomics risk factors for fresh fruit bunch (FFB) cutters during different stages of harvesting. Although the ergonomics risk factors remain the same for FFB collectors, the intensity of manual lifting increases significantly with the age of the oil palm trees-weight of FFB. There is urgent need to establish surveillance in order to determine the current prevalence of ergonomic injuries. Thereafter, ergonomics interventions that are holistic and comprehensive should be conducted and evaluated for their efficacy using approaches that are integrated, participatory and cost-effective.

[Technology and future ways of thinking related to work from ergonomics points of views in moments of global crisis].

PubMed

Puentes-Lagos, David E; García-Acosta, Gabriel

2012-06-01

Is it possible to establish (at short, medium and long term) future work conditions or expected work conditions for Colombian people considering upcoming work technologies? Is it possible to anticipate future work desirable work conditions for Colombian people in order to plan (foresee?) work technologies? These questions guided this research and they point to an action thesis and to a reaction one in this context of work crisis. Even though a work technology establishes where, when, how, who, who with, and using what element work is done, it also establishes certain work conditions. Besides, multiple forms of considering and deconstructing past have been created from many disciplines. However, in order to foresee or construct work technologies requires a different perspective for looking further. This research has been carried out considering other disciplines points of view regarding Future Studies and Future Thinking Studies. This research has the purpose of finding future paths for Future Thinking Studies from ergonomics point of view in this moment of global work crisis we are going through.

Ergonomic Evaluation of Battery Powered Portable Cotton Picker

NASA Astrophysics Data System (ADS)

Dixit, A.; Manes, G. S.; Singh, A.; Prakash, A.; Mahal, J. S.

2012-09-01

Ergonomic evaluation of battery powered portable manual cotton picker was carried out on two subjects for three cotton varieties and was compared against manual method of picking. It is a hand operated machine and has a pair of chain with small sharp edged teeth and sprockets and is operated by a light weight 12 V battery. Cotton gets entangled with the chain and is collected and guided into the collection bag. Average heart rate, oxygen consumption, workload, energy expenditure was more in case of cotton picking by manual cotton picker as compared to manual picking for both the subjects for all three cotton variety types. Oxygen consumption varied from 0.81 to 0.97 l/min, workload varied from 36.32 to 46.16 W and energy expenditure varied from 16.83 to 20.33 kJ/min for both the subject in case of machine picking for all three cotton varieties. The maximum discomfort experienced by the subjects during picking cotton by manual cotton picker was in right wrist palm, right forearm, upper and lower back, left shoulder and in lower legs and both feet.

Emotion and interior space design: an ergonomic perspective.

PubMed

Reddy, Swathi Matta; Chakrabarti, Debkumar; Karmakar, Sougata

2012-01-01

Interaction between the users and their environment is spontaneous and unavoidable. This interaction can be positive or negative. A good interior space is about considering all the physical, environmental and cognitive elements and harmonizing them to make it a space that feels right, functionally and emotionally. The important element that has to be considered the most in an interior space is the "user". Balancing all these elements is a challenging job and results in a perfect interior space design. This paper intends to bring to light the necessity of designing an optimum interior space, which is a balance of the user's choice and the mandatory standards that ought to be followed for user safety and convenience. There has to be an intervening domain of ergonomics which will guide to bring out a balance between the personal choice of the user and the usual standards followed. It should also provide a step-by-step information, guidance and direction to act to the specifications and standards systematically to adapt an integrated approach of handling all the elements holistically which will indeed result in a good interior space.

Future of operating rooms.

PubMed

Reijnen, Michel M P J; Zeebregts, Clark J; Meijerink, Wilhelmus J H J

2005-01-01

Operating-room design has not changed significantly since the modern era of surgery began. Minimal invasive, endoscopic, procedures, and evolution of technology will affect operating-room design in the near future. Poor ergonomics has always been one of the major drawbacks of endoscopic surgery. Use of retractable arms and monitors will improve ergonomics of the operating team. Developments in telecommunication will allow surgeons to communicate with colleagues and experts during the procedure in virtually any location around the world, which increases teaching possibilities and procedural safety. Introduction and further development of intraoperative imaging, including real-time, three-dimensional (3-D) reconstructions of patient, and computer-aided surgery offer surgeons the opportunity to train the planned surgical procedure. Moreover, they will improve control and supervision of the procedure in learning situations. The last decade's robotics have made their introduction into the operating rooms. They improve control over the operating-room environment and will facilitate the performance of more complex procedures. However, high costs and lack of force feedback remain its major drawbacks. Improvements of robotic techniques and its implementation into the operating rooms will further guide their design into highly specialized operating units.

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

ERIC Educational Resources Information Center

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

The Need to Reevaluate Nonresponding Ergonomic Patients

NASA Technical Reports Server (NTRS)

Scarpa, Philip J.; Field, Steven A.

1999-01-01

The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

Ergonomics policy in Indonesia.

PubMed

Sutarjo, Untung S

2007-12-01

Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

Reducing musculoskeletal discomfort: effects of an office ergonomics workplace and training intervention.

PubMed

Robertson, Michelle M; O'Neill, Michael J

2003-01-01

Effects of an office ergonomics workplace and training intervention on workers' knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers' office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers' office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.

A usability evaluation toolkit for In-Vehicle Information Systems (IVISs).

PubMed

Harvey, Catherine; Stanton, Neville A; Pickering, Carl A; McDonald, Mike; Zheng, Pengjun

2011-05-01

Usability must be defined specifically for the context of use of the particular system under investigation. This specific context of use should also be used to guide the definition of specific usability criteria and the selection of appropriate evaluation methods. There are four principles which can guide the selection of evaluation methods, relating to the information required in the evaluation, the stage at which to apply methods, the resources required and the people involved in the evaluation. This paper presents a framework for the evaluation of usability in the context of In-Vehicle Information Systems (IVISs). This framework guides designers through defining usability criteria for an evaluation, selecting appropriate evaluation methods and applying those methods. These stages form an iterative process of design-evaluation-redesign with the overall aim of improving the usability of IVISs and enhancing the driving experience, without compromising the safety of the driver. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics Climate Assessment: A measure of operational performance and employee well-being.

PubMed

Hoffmeister, Krista; Gibbons, Alyssa; Schwatka, Natalie; Rosecrance, John

2015-09-01

Ergonomics interventions have the potential to improve operational performance and employee well-being. We introduce a framework for ergonomics climate, the extent to which an organization emphasizes and supports the design and modification of work to maximize both performance and well-being outcomes. We assessed ergonomics climate at a large manufacturing facility twice during a two-year period. When the organization used ergonomics to promote performance and well-being equally, and at a high level, employees reported less work-related pain. A larger discrepancy between measures of operational performance and employee well-being was associated with increased reports of work-related pain. The direction of this discrepancy was not significantly related to work-related pain, such that it didn't matter which facet was valued more. The Ergonomics Climate Assessment can provide companies with a baseline assessment of the overall value placed on ergonomics and help prioritize areas for improving operational performance and employee well-being. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Vision of the future of ergonomics in dentistry].

PubMed

Hokwerda, O

2008-08-01

With respect to ergonomics in dentistry, more people are becoming aware of occupational hazards and paying more attention to the prevention of hazards. Dutch law on health and safety at work requires dentists to protect the health and safety of their employees and educational institutions to protect the health and safety of their students. In the meantime a summary has appeared of the ergonomic standards required for the working methods of dentists and for the development of future equipment. Further development of dental ergonomics must take place on the basis of a coherent vision of the future. In this regard it must be clear exactly what ergonomics is and what developments have already taken place. Aspects of particular interest are the prevention of occupational diseases, legal responsibility for protecting the health and safety of employees and students, education in dental ergonomics for dental and oral hygiene students, the academic development and research of dental ergonomics, using organizational models in daily dental practice, and the development of ergonomics at the European level.

Inclusive design--assistive technology for people with cerebral palsy.

PubMed

Heidrich, Regina; Bassani, Patrícia

2012-01-01

The first sentence of the Abstract should follow the word "Abstract." on the same line. The abstract should be clear, descriptive, self-explanatory and no longer than 200 words. It should also be suitable for publication in abstracting services. Do not include references or formulae in the abstract. This study reports the work of the Inclusive Design research project conducted with a group of children with cerebral palsy Our project has been working with Assistive Technology and has been developing an expanded mouse and a keyboard. Nowadays, we are working as a researcher of Cognitive Ergonomics and of Inclusive Education. The goal of our project is to establish an interdisciplinary study that focus the developing of a research in Ergonomics Design, contributing to improve the assistance to people with special needs. One applied the pedagogical approach, using Vygotsky's Social-historic Theory that advocates the concept of each individual's experiences are important to improve them. The development methodology was based on user-centered design. The results showed that as long as the students applied the new technologies they developed superior psychological processes towards social interaction, autonomy, taking part in class activities more efficiently. Also, we verified how important the new technologies in class were, considering the methodologies, objectives full and effective described on this study. This way, we do hope, from the data obtained on this research, to contribute with the ones who believe that the improvement of handicap students' inclusion in class is a reality.

30 years of ergonomics at 3M: a case study.

PubMed

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

PubMed

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

Connections between voice ergonomic risk factors and voice symptoms, voice handicap, and respiratory tract diseases.

PubMed

Rantala, Leena M; Hakala, Suvi J; Holmqvist, Sofia; Sala, Eeva

2012-11-01

The aim of the study was to investigate the connections between voice ergonomic risk factors found in classrooms and voice-related problems in teachers. Voice ergonomic assessment was performed in 39 classrooms in 14 elementary schools by means of a Voice Ergonomic Assessment in Work Environment--Handbook and Checklist. The voice ergonomic risk factors assessed included working culture, noise, indoor air quality, working posture, stress, and access to a sound amplifier. Teachers from the above-mentioned classrooms reported their voice symptoms, respiratory tract diseases, and completed a Voice Handicap Index (VHI). The more voice ergonomic risk factors found in the classroom the higher were the teachers' total scores on voice symptoms and VHI. Stress was the factor that correlated most strongly with voice symptoms. Poor indoor air quality increased the occurrence of laryngitis. Voice ergonomics were poor in the classrooms studied and voice ergonomic risk factors affected the voice. It is important to convey information on voice ergonomics to education administrators and those responsible for school planning and taking care of school buildings. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Systematic methodological review: developing a framework for a qualitative semi-structured interview guide.

PubMed

Kallio, Hanna; Pietilä, Anna-Maija; Johnson, Martin; Kangasniemi, Mari

2016-12-01

To produce a framework for the development of a qualitative semi-structured interview guide. Rigorous data collection procedures fundamentally influence the results of studies. The semi-structured interview is a common data collection method, but methodological research on the development of a semi-structured interview guide is sparse. Systematic methodological review. We searched PubMed, CINAHL, Scopus and Web of Science for methodological papers on semi-structured interview guides from October 2004-September 2014. Having examined 2,703 titles and abstracts and 21 full texts, we finally selected 10 papers. We analysed the data using the qualitative content analysis method. Our analysis resulted in new synthesized knowledge on the development of a semi-structured interview guide, including five phases: (1) identifying the prerequisites for using semi-structured interviews; (2) retrieving and using previous knowledge; (3) formulating the preliminary semi-structured interview guide; (4) pilot testing the guide; and (5) presenting the complete semi-structured interview guide. Rigorous development of a qualitative semi-structured interview guide contributes to the objectivity and trustworthiness of studies and makes the results more plausible. Researchers should consider using this five-step process to develop a semi-structured interview guide and justify the decisions made during it. © 2016 John Wiley & Sons Ltd.

Musculoskeletal symptoms amongst clinical radiologists and the implications of reporting environment ergonomics--a multicentre questionnaire study.

PubMed

Rodrigues, Jonathan C L; Morgan, Steven; Augustine, Katharine; Clague, Gavin; Pearce, Tim; Pollentine, Adrian; Wallis, Adam; Wilson, David; McCoubrie, Paul

2014-04-01

This multicentre study aimed to assess compliance of the reporting environment with best ergonomic practice and to determine the prevalence of musculoskeletal symptoms related to working as a radiologist. All 148 radiology trainees and consultants in 10 hospitals across the region were invited to complete a musculoskeletal symptoms and reporting ergonomics questionnaire. Best ergonomic reporting practice was defined, following literature review, as being able to alter the following: monitor, desk, chair and armrest height, chair back support, ambient light, and temperature. The frequency that these facilities were available and how often they were used was determined. One hundred and twenty-three out of 148 (83%) radiologists responded, and 38% reported radiology-associated occupational injury. Lower back discomfort was the commonest radiology associated musculoskeletal symptom (41%). Only 13% of those with occupational injury sought the advice of occupational health. No reporting environments conformed completely to best ergonomic practice. Where certain facilities were available, less than a third of radiologists made personal ergonomic adjustments prior to starting a reporting session. Radiologists who had good self-assessed knowledge of best ergonomic practice had significantly less back discomfort than those with poor self-assessed knowledge (P < 0.005). We demonstrated high prevalence of musculoskeletal symptoms amongst radiologists. Poor compliance of the reporting environment with best ergonomic practice, in combination with our other findings of a low level of ergonomic awareness, low rates of making ergonomic adjustments and seeking appropriate help, may be implicated. We hope this study raises awareness of this issue and helps prevent long-term occupational injury amongst radiologists from poor ergonomic practice.

Ergonomics: Injury Protection You Can Afford.

ERIC Educational Resources Information Center

Sturgeon, Julie

1998-01-01

Examines the physical health risks attributed to poor furniture and equipment ergonomics and looks at ways to help assure that furniture and equipment purchases and practices are ergonomically sound. Cautions to be wary wary of marketing hype that a company's furniture is ergonomically set, and acquire adjustable furniture and encourage students…

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

PubMed

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

Promoting ergonomics in Algeria: activities of "the research and training laboratory" in the University of Oran.

PubMed

Mebarki, Bouhafs; El-Bachir, Tebboune Cheikh

2012-01-01

The growing need in Algeria to develop ergonomics knowledge and practice in industry was behind the initiative to develop a training and research project within the ergonomics laboratory at Oran University. Since 2005 the laboratory team is running an academic option master in work design and ergonomics. The evaluation of the academic master in 2010 revealed the acute need of the local industry for professional competences in ergonomic and work psychology. A professional training master program in "ergonomics & work psychology" was then developed in partnership with local industry, five European Universities and six Universities from three Maghreb countries. Research projects were initiated around the two training programs, in conjunction with a number of ergonomics dissemination and promotion activities. Preliminary results of the project are presented and discussed in relation to the local context, and in the light of similar cases in Industrially Developing Countries.

The discipline of ergonomics in Cuba within the occupational health framework: background and trends.

PubMed

Torres, Yaniel; Rodríguez, Yordán; Viña, Silvio

2013-01-01

The concept of ergonomics was introduced in Cuba at the beginning of the 1970s. More than 40 years later, the prevailing approach to workers' health is still generally reactive rather than proactive, despite the commitment of the government to the subject. A factor influencing this issue is, generally, lack of recognition of the benefits of establishing ergonomic principles within most occupational activities. Recent progress to move occupational health practice toward a more preventive approach has been conducted, frequently with international support. The introduction of a set of Cuban standards proposing the necessity of ergonomic evaluations is an example of this progress. The main challenge for Cuban ergonomists is to transfer knowledge to occupational health practitioners in order to be in concordance with basic standards and regulations regarding ergonomics. The article offers a short description of the history of ergonomics and an overview of ergonomics practice in Cuba.

Green ergonomics: combining sustainability and ergonomics.

PubMed

Pilczuk, Davana; Barefield, Kevin

2014-01-01

When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

Corporate initiatives in ergonomics--an introduction.

PubMed

Hägg, Göran M

2003-01-01

Examples in the literature of corporate initiatives in ergonomics are reviewed. Different types of programmes are identified with ambitions ranging from time-limited interventions to continuous processes. Common elements are health surveillance, workstation design and choice of tools, product design, quality aspects, participative aspects and education, training and information. The implementation of ergonomics programmes varies substantially depending on the type of company, and company policies and organisation. Some of the most developed ergonomics programmes originate from the automobile industry. Other businesses with many established programmes are the electronics industry, the food industry and the office environment. A participative approach, as well as ergonomics expertise, are crucial ingredients for a successful programme. The scientific evaluation of ergonomics programmes, especially in economical terms, is in too many cases insufficient or missing. Furthermore, links to company core values such as quality improvement are often lacking. Programmes in ergonomics are still often seen as solely a matter of health and safety. Only a few companies have reached the state where ergonomics constitutes an integrated part of the overall strategy of the enterprise.

The stage of change approach for implementing ergonomics advice - Translating research into practice.

PubMed

Rothmore, Paul; Aylward, Paul; Oakman, Jodi; Tappin, David; Gray, Jodi; Karnon, Jonathan

2017-03-01

The Stage of Change (SOC) approach has been proposed as a method to improve the implementation of ergonomics advice. However, despite evidence for its efficacy there is little evidence to suggest it has been adopted by ergonomics consultants. This paper investigates barriers and facilitators to the implementation, monitoring and effectiveness of ergonomics advice and the adoption of the SOC approach in a series of focus groups and a subsequent survey of members of the Human Factors Societies of Australia and New Zealand. A proposed SOC assessment tool developed for use by ergonomics practitioners is presented. Findings from this study suggest the limited application of a SOC based approach to work-related musculoskeletal injury prevention by ergonomics practitioners is due to the absence of a suitable tool in the ergonomists' repertoire, the need for training in this approach, and their limited access to relevant research findings. The final translation of the SOC assessment tool into professional ergonomics practice will require accessible demonstration of its real-world usability to practitioners and the training of ergonomics practitioners in its application. Copyright © 2016 Elsevier Ltd. All rights reserved.

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

PubMed

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

Swedish Sonographers' perceptions of ergonomic problems at work and their suggestions for improvement.

PubMed

Gemark Simonsen, Jenny; Gard, Gunvor

2016-09-15

Sonographers' perceptions of ergonomic and work-related pain problems at work have so far mostly been researched in quantitative studies by questionnaires. There is a need of experience-based research to deepen the knowledge about how sonographers perceive ergonomic problems at work. Therefore, the aim of this qualitative study was to describe sonographers' perceptions of ergonomic problems at work, and their suggestions for improvement strategies. Twenty-two female sonographers were individually interviewed regarding different aspects of their physical working environment. Content analysis was applied. The sonographers perceived different ergonomic problems in their working environment, but to offer patient comfort and to obtain the best possible images were often prioritized over working posture. Echocardiography was considered demanding as the examination is performed with little variation in posture. Ergonomic improvements included reducing the manual handling of the transducer, optimizing the adjustability of equipment, and taking the patient's physique and health into account. As some examinations were perceived to be more ergonomically demanding, variation between examinations was suggested, however, this requires broader skills. Sonography, especially echocardiography is ergonomically demanding but the improvement strategies suggested were perceived useful and applicable.

Ergonomics and sustainability: towards an embrace of complexity and emergence.

PubMed

Dekker, Sidney W A; Hancock, Peter A; Wilkin, Peter

2013-01-01

Technology offers a promising route to a sustainable future, and ergonomics can serve a vital role. The argument of this article is that the lasting success of sustainability initiatives in ergonomics hinges on an examination of ergonomics' own epistemology and ethics. The epistemology of ergonomics is fundamentally empiricist and positivist. This places practical constraints on its ability to address important issues such as sustainability, emergence and complexity. The implicit ethical position of ergonomics is one of neutrality, and its positivist epistemology generally puts value-laden questions outside the parameters of what it sees as scientific practice. We argue, by contrast, that a discipline that deals with both technology and human beings cannot avoid engaging with questions of complexity and emergence and seeking innovative ways of addressing these issues. Ergonomics has largely modelled its research on a reductive science, studying parts and problems to fix. In sustainability efforts, this can lead to mere local adaptations with a negative effect on global sustainability. Ergonomics must consider quality of life globally, appreciating complexity and emergent effects of local relationships.

The effectiveness of physical and organisational ergonomic interventions on low back pain and neck pain: a systematic review.

PubMed

Driessen, Maurice T; Proper, Karin I; van Tulder, Maurits W; Anema, Johannes R; Bongers, Paulien M; van der Beek, Allard J

2010-04-01

Ergonomic interventions (physical and organisational) are used to prevent or reduce low back pain (LBP) and neck pain among workers. We conducted a systematic review of randomised controlled trials (RCTs) on the effectiveness of ergonomic interventions. A total of 10 RCTs met the inclusion criteria. There was low to moderate quality evidence that physical and organisational ergonomic interventions were not more effective than no ergonomic intervention on short and long term LBP and neck pain incidence/prevalence, and short and long term LBP intensity. There was low quality evidence that a physical ergonomic intervention was significantly more effective for reducing neck pain intensity in the short term (ie, curved or flat seat pan chair) and the long term (ie, arm board) than no ergonomic intervention. The limited number of RCTs included make it difficult to answer our broad research question and the results should be interpreted with care. This review, however, provides a solid overview of the high quality epidemiological evidence on the (usually lack of) effectiveness of ergonomic interventions on LBP and neck pain.

Impact of task design on task performance and injury risk: case study of a simulated drilling task.

PubMed

Alabdulkarim, Saad; Nussbaum, Maury A; Rashedi, Ehsan; Kim, Sunwook; Agnew, Michael; Gardner, Richard

2017-06-01

Existing evidence is limited regarding the influence of task design on performance and ergonomic risk, or the association between these two outcomes. In a controlled experiment, we constructed a mock fuselage to simulate a drilling task common in aircraft manufacturing, and examined the effect of three levels of workstation adjustability on performance as measured by productivity (e.g. fuselage completion time) and quality (e.g. fuselage defective holes), and ergonomic risk as quantified using two common methods (rapid upper limb assessment and the strain index). The primary finding was that both productivity and quality significantly improved with increased adjustability, yet this occurred only when that adjustability succeeded in reducing ergonomic risk. Supporting the inverse association between ergonomic risk and performance, the condition with highest adjustability created the lowest ergonomic risk and the best performance while there was not a substantial difference in ergonomic risk between the other two conditions, in which performance was also comparable. Practitioner Summary: Findings of this study supported a causal relationship between task design and both ergonomic risk and performance, and that ergonomic risk and performance are inversely associated. While future work is needed under more realistic conditions and a broader population, these results may be useful for task (re)design and to help cost-justify some ergonomic interventions.

[Inter-rater agreement on self-reported exposure to ergonomic risk factors for the upper extremities among mechanic assemblers in an automotive industry].

PubMed

d'Errico, Angelo; Fontana, Dario; Merogno, Angela

2016-01-01

to assess reproducibility of self-reported exposure to ergonomic hazards for the upper limbs, measured through a questionnaire based on a diffused checklist for the assessment of ergonomic risk (OCRA) in a sample of mechanical assemblers of an automotive industry. cross-sectional study; reproducibility was assessed as interrater agreement of a composite index of ergonomic risk, estimated through the intraclass correlation coefficient (ICC). 58 mechanical assemblers, working in 29 twin areas, characterised by same work stations and tasks. composite index of ergonomic risk for the upper limbs. reproducibility of the ergonomic index was high in the overall sample (ICC: 0.81) and it was higher for the twin areas employing same-gender workers (ICC: 0.96), compared to those with workers of the opposite gender (ICC: 0.66). these results indicate that a questionnaire measuring with a great detail the exposure to the main ergonomic risk factors for the upper limbs, as the one based on the OCRA checklist used for this study, would allow to obtain a highly reproducible ergonomic index. If its validity against the corresponding observational checklist will be found elevated by future studies, this questionnaire may represent a useful tool for a preliminary assessment of workers' exposure to ergonomic hazards for the upper limbs.

[Marine, aviation and space physician, psychologist and physiologist (To the 90th anniversary of the birth of G. M. Zarakovskii)].

PubMed

Dvornikov, M V; Medenkov, A A

2015-04-01

In the current paper authors discuss problems of marine and aerospace medicine and psychophysiology, which Georgii Zarakovskii (1925-2014), a prominent domestic experts in the field of military medicine, psychology and ergonomics, solved. Authors focused on methodological approaches and results of the study of psychophysiological characteristics and human capabilities took into account for design of tools and organization of flight crews, astronauts and military experts. Authors marked the contribution to the creation of a system integrating psychophysiological features and characteristics of the person neccessary for development, testing and maintenance of aerospace engineering and organization of its professional activities. The possibilities of using the methodology of psychophysiological activity analysis in order to improve the reliability of psychophysiological military specialists, are shown.

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Validation of ergonomic instructions in robot-assisted surgery simulator training.

PubMed

Van't Hullenaar, C D P; Mertens, A C; Ruurda, J P; Broeders, I A M J

2018-05-01

Training in robot-assisted surgery focusses mainly on technical skills and instrument use. Training in optimal ergonomics during robotic surgery is often lacking, while improved ergonomics can be one of the key advantages of robot-assisted surgery. Therefore, the aim of this study was to assess whether a brief explanation on ergonomics of the console can improve body posture and performance. A comparative study was performed with 26 surgical interns and residents using the da Vinci skills simulator (Intuitive Surgical, Sunnyvale, CA). The intervention group received a compact instruction on ergonomic settings and coaching on clutch usage, while the control group received standard instructions for usage of the system. Participants performed two sets of five exercises. Analysis was performed on ergonomic score (RULA) and performance scores provided by the simulator. Mental and physical load scores (NASA-TLX and LED score) were also registered. The intervention group performed better in the clutch-oriented exercises, displaying less unnecessary movement and smaller deviation from the neutral position of the hands. The intervention group also scored significantly better on the RULA ergonomic score in both the exercises. No differences in overall performance scores and subjective scores were detected. The benefits of a brief instruction on ergonomics for novices are clear in this study. A single session of coaching and instruction leads to better ergonomic scores. The control group showed often inadequate ergonomic scores. No significant differences were found regarding physical discomfort, mental task load and overall performance scores.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery.

PubMed

Lee, Mija Ruth; Lee, Gyusung Isaiah

2017-09-01

To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ² test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (p<0.05). Gynecologists who felt highly confident about managing ergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (p<0.05). In minimizing their symptoms, surgeons changed ergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (p<0.05). The most common robotic system components to be improved for better ergonomics were microphone/speaker, pedal design, and finger clutch. More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. Copyright © 2017. Asian Society of Gynecologic Oncology, Korean Society of Gynecologic Oncology

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery

PubMed Central

2017-01-01

Objective To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. Methods The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). Results There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ2 test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (p<0.05). Gynecologists who felt highly confident about managing ergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (p<0.05). In minimizing their symptoms, surgeons changed ergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (p<0.05). The most common robotic system components to be improved for better ergonomics were microphone/speaker, pedal design, and finger clutch. Conclusion More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. PMID:28657231

Ergonomic positioning or equipment for treating carpal tunnel syndrome.

PubMed

O'Connor, Denise; Page, Matthew J; Marshall, Shawn C; Massy-Westropp, Nicola

2012-01-18

Non-surgical treatment, including ergonomic positioning or equipment, are sometimes offered to people experiencing mild to moderate symptoms from carpal tunnel syndrome (CTS). The effectiveness and duration of benefit from ergonomic positioning or equipment interventions for treating CTS are unknown. To assess the effects of ergonomic positioning or equipment compared with no treatment, a placebo or another non-surgical intervention in people with CTS. We searched the Cochrane Neuromuscular Disease Group Specialized Register (14 June 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (2011, Issue 2, in The Cochrane Library), MEDLINE (1966 to June 2011), EMBASE (1980 to June 2011), CINAHL Plus (1937 to June 2011), and AMED (1985 to June 2011). We also reviewed the reference lists of randomised or quasi-randomised trials identified from the electronic search. Randomised or quasi-randomised controlled trials comparing ergonomic positioning or equipment with no treatment, placebo or another non-surgical intervention in people with CTS. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias of included studies. We calculated risk ratios (RR) and mean differences (MD) with 95% confidence intervals (CI) for the primary and secondary outcomes. We pooled results of clinically and statistically homogeneous trials, where possible, to provide estimates of the effect of ergonomic positioning or equipment. We included two trials (105 participants) comparing ergonomic versus placebo keyboards. Neither trial assessed the primary outcome (short-term overall improvement) or adverse effects of interventions. In one small trial (25 participants) an ergonomic keyboard significantly reduced pain after 12 weeks (MD -2.40; 95% CI -4.45 to -0.35) but not six weeks (MD -0.20; 95% CI -1.51 to 1.11). In this same study, there was no difference between ergonomic and standard keyboards in hand function at six or 12 weeks or palm-wrist sensory latency at 12 weeks. The second trial (80 participants) reported no significant difference in pain severity after six months when using either of the three ergonomic keyboards versus a standard keyboard. No trials comparing (i) ergonomic positioning or equipment with no treatment, (ii) ergonomic positioning or equipment with another non-surgical treatment, or (iii) different ergonomic positioning or equipment regimes, were found. There is insufficient evidence from randomised controlled trials to determine whether ergonomic positioning or equipment is beneficial or harmful for treating carpal tunnel syndrome.

Industrial Technology Modernization Program. Project 80. Increase Efficiency of Card Test/Device Test Areas by the Usage of Improved Material Handling Systems. Revision 1. Phase 2

DTIC Science & Technology

1988-03-01

INDUSTRY ANALYSIS/FINDINGS 132 12 EQUIPMENT/MACHINERY ALTERNATIVES 134 13 MIS REQUIREMENTS/IMPROVEMENTS 135 14 COST BENEFIT ANALYSIS AND PROCEDURE 137 15...SOFTWARE DIAGRAM 14.0-1 COST BENEFIT ANALYSIS METHODOLOGY 138 14.3-1 PROJECT 80 EXPENDITURE SCHEDULE 141 14.4-1 PROJECT 80 CASH FLOWS 142 15.1-1 PROJECT 80...testing, streamlining work flow, and installation of ergonomically designed work cell/work centers. The benefits associated with the implementation of ITM

An effective model for ergonomic optimization applied to a new automotive assembly line

NASA Astrophysics Data System (ADS)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

Self-assessment of ergonomics amongst dental students utilising photography: RCT.

PubMed

Partido, B B; Wright, B M

2018-03-02

Dental professionals are at high risk of musculoskeletal disorders (MSDs) due to static working positions for extended periods of time. Musculoskeletal pain has been identified as early as during their entry-level dental education. The purpose of this study was to determine whether feedback involving photography and self-assessment would improve ergonomic scores and the accuracy of ergonomic self-assessments amongst dental students. The study involved a randomised control design of 135 dental students. At weeks 1 and 4, participants were photographed, and at weeks 1 through 4, participants completed ergonomic self-evaluations, using a Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks 2 and 3, participants in the training group were photographed and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were evaluated for ergonomic scores by two raters. A mixed-design ANOVA of ergonomic scores revealed that ergonomic scores improved for all students who received the ergonomics training (F(1,254)=17.41, P < .001). In addition, a mixed-design ANOVA of kappa coefficient values between student and rater scores revealed that the accuracy of self-assessments improved for all students who received the ergonomics training (F(1,127)=6.33, P < .05). The use of photographs and self-assessment provides dental and dental hygiene educators with a pragmatic method to improve self-assessment skills, increase student awareness of any postural deviations from ideal and improve musculoskeletal health. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Dental Hygiene Students' Self-Assessment of Ergonomics Utilizing Photography.

PubMed

Partido, Brian B

2017-10-01

Due to postural demands, dental professionals are at high risk for developing work-related musculoskeletal disorders (WMSDs). Dental clinicians' lack of ergonomic awareness may impede the clinical application of recommendations to improve their posture. The aim of this study was to determine whether feedback involving photography and self-assessment would improve dental hygiene students' ergonomic scores and accuracy of their ergonomic self-assessments. The study involved a randomized control design and used a convenience sample of all 32 junior-year dental hygiene students enrolled in the autumn 2016 term in The Ohio State University baccalaureate dental hygiene program. Sixteen students were randomly assigned to each of two groups (control and training). At weeks one and four, all participants were photographed and completed ergonomic self-evaluations using the Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks two and three, participants in the training group were photographed again and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were given ergonomic scores by three raters. Students' self-assessments in the control group and faculty evaluations of the training group showed significant improvement in scores over time (F(1,60)=4.25, p<0.05). In addition, the accuracy of self-assessment significantly improved for students in the training group (F(1,30)=8.29, p<0.01). In this study, dental hygiene students' self-assessments using photographs resulted in improvements in their ergonomic scores and increased accuracy of their ergonomic self-assessments. Any improvement in ergonomic score or awareness can help reduce the risks for WMSDs, especially among dental clinicians.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria.

PubMed

Oladeinde, B H; Ekejindu, I M; Omoregie, R; Aguh, O D

2015-01-01

Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT(®). Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated.

A model of ergonomics intervention in industry: case study in Japan.

PubMed

Chavalitsakulchai, P; Ohkubo, T; Shahnavaz, H

1994-06-01

This paper presents the results of an ergonomics survey in four different Japanese work places. The survey consisted of two parts. In the first part, the physical and psycho-social problems of the female workers were investigated. Questionnaire techniques were used to assess musculoskeletal disorders in various parts of the body and of psycho-social stress at work as well as in the daily life situation. Furthermore, work posture analysis, task analysis, simple clinical tests and flexibility tests were conducted. In the second part, the ergonomics intervention practices in different types of Japanese work places were examined. Three different questionnaires were developed and used to collect information from representatives of employees, management and responsible governmental agents of the Department of Industrial Safety and Health, Ministry of Labor, with regard to ergonomic interventions at work places. Management, employees, and government representatives expressed desire for cooperation and participation for arrangement of the ergonomics intervention program. A model for appropriate ergonomics intervention in industry is developed with regard to physical and psycho-social problems at work. Factors influencing worker participation and the establishment of a dynamic system of ergonomics intervention at work places are discussed. Practical ways for improving the working conditions of female workers are: (i) cooperation between managers, workers, and government officers is regarded as vital for the ergonomics intervention program, (ii) worker participation, (iii) appropriate training course with regard to ergonomics education, and (iv) managerial support.

Warfighter Integrated Physical Ergonomics Tool Development: Needs Analysis and State of the Art Review

DTIC Science & Technology

2011-03-01

Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 14 e) Forces: Griffon seat design assessments include questions of vibration...the suitability of alternative designs . Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 5 e) Performance Measures...configurations to assess Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 8 design and acquisition decisions, and more

Occupational ergonomics and injury prevention.

PubMed

Stobbe, T J

1996-01-01

Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

PubMed

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

The FITS model office ergonomics program: a model for best practice.

PubMed

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Ergonomic considerations in school environments - the need for widening the scope.

PubMed

Jayaratne, Kapila

2012-01-01

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.

The ergonomics of learning: educational design and learning performance.

PubMed

Smith, T J

2007-10-01

The application of ergonomics/human factors (E/HF) principles and practices, and the implementation of ergonomics programmes, have achieved proven success in improving performance, productivity, competitiveness, and safety and health in most occupational sectors. However, the benefits that the application of E/HF science might bring to promoting student learning have yet to be widely recognized. This paper deals with the fundamental purpose of education - student learning - and with the question of how the ergonomic design of the learning environment influences learning performance. The underlying premise, embodied in the quote below, is that student learning performance to a substantial degree is context specific - influenced and specialized in relation to specific design factors in the learning environment. The basic scientific question confronting learning ergonomics is which design characteristics in the learning environment have the greatest influence on variability in learning performance. Practically, the basic challenge is to apply this scientific understanding to ergonomic interventions directed at design improvements of learning environments to benefit learning. This paper expands upon these themes by addressing the origins and scope of learning ergonomics, differing perspectives on the nature of learning, evidence for context specificity in learning and conclusions and research implications regarding an ergonomics perspective on learning.

Designing for sustainability: ergonomics--carpe diem.

PubMed

Martin, K; Legg, S; Brown, C

2013-01-01

Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

Cultural ergonomics in interactional and experiential design: conceptual framework and case study of the Taiwanese twin cup.

PubMed

Lin, Chih-Long; Chen, Si-Jing; Hsiao, Wen-Hsin; Lin, Rungtai

2016-01-01

Cultural ergonomics is an approach that considers interaction- and experience-based variations among cultures. Designers need to develop a better understanding of cultural ergonomics not just to participate in cultural contexts but also to develop interactive experiences for users. Cultural ergonomics extends our understanding of cultural meaning and our ability to utilize such understanding for design and evaluate everyday products. This study aims to combine cultural ergonomics and interactive design to explore human-culture interaction in user experiences. The linnak is a typical Taiwanese aboriginal cultural object. This study examined the cultural meaning and operational interface of the linnak, as well as the scenarios in which it is used in interaction and user experiences. The results produced a cultural ergonomics interface for examining the manner in which designers communicate across cultures as well as the interweaving of design and culture in the design process. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

PubMed

Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

2005-01-01

Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

The impact of ergonomic work environment exposures on the risk of disability pension: Prospective results from DWECS/DREAM.

PubMed

Labriola, Merete; Feveile, Helene; Christensen, Karl B; Strøyer, Jesper; Lund, Thomas

2009-11-01

The objectives were to identify the impact of ergonomic work environment exposures on the risk of disability pension. A representative sample of 8475 employees of the total working population in Denmark were interviewed regarding work environment exposures and followed in a national register with data on granted disability pension. For women, approximately 34% of the disability pension cases were attributable to ergonomic work environment exposures. For men, 21% of the disability pension cases were attributable to ergonomic work environment. Ergonomic work environment, especially physically demanding work, working with hands lifted and repetitive work, are areas of intervention at the workplace that can facilitate and prolong labour market participation. The study provides estimates for the association between ergonomic exposures at work and administrative, cost-related measures of work disability in a large population-based longitudinal cohort study over 14 years. Approximately 21% for men and 34% for women of the disability pension cases were attributable to ergonomic work environment exposures.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

PubMed

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An effective model for ergonomic optimization applied to a new automotive assembly line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-08

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assemblymore » line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.« less

Mechanistic-empirical Pavement Design Guide Implementation

DOT National Transportation Integrated Search

2010-06-01

The recently introduced Mechanistic-Empirical Pavement Design Guide (MEPDG) and associated computer software provides a state-of-practice mechanistic-empirical highway pavement design methodology. The MEPDG methodology is based on pavement responses ...

[How to make your own custom cutting guides for both mandibular and fibular stair step osteotomies?

PubMed

Rem, K; Bosc, R; De Kermadec, H; Hersant, B; Meningaud, J-P

2017-12-01

Using tailored cutting guides for osteocutaneous free fibula flap in complex mandibular reconstruction after cancer resection surgery constitutes a substantial improvement. Autonomously conceiving and manufacturing the cutting guides within a plastic surgery department with computer-aided design (CAD) and three-dimensional (3D) printing allows planning more complex osteotomies, such as stair-step osteotomies, in order to achieve more stable internal fixations. For the past three years, we have been producing by ourselves patient-tailored cutting guides using CAD and 3D printing. Osteotomies were virtually planned, making the cutting lines more complex in order to optimize the internal fixation stability. We also printed reconstructed mandible templates and shaped the reconstruction plates on them. We recorded data including manufacturing techniques and surgical outcomes. Eleven consecutive patients were operated on for an oral cavity cancer. For each patient, we planned the fibular and mandibular stair-step osteotomies and we produced tailored cutting guides. In all patients, we achieved to get immediately stable internal fixations and in 10 patients, a complete bone consolidation after 6 months. Autonomously manufacturing surgical cutting guides for mandibular reconstruction by free fibula flap is a significant improvement, regarding ergonomics and precision. Planning stair-step osteotomies to perform complementary internal fixation increases contact surface and congruence between the bone segments, thus improving the reconstructed mandible stability. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Managing In-House Development of a Campus-Wide Information System

ERIC Educational Resources Information Center

Shurville, Simon; Williams, John

2005-01-01

Purpose: To show how a combination of hard and soft project and change management methodologies guided successful in-house development of a campus-wide information system. Design/methodology/approach: A case study of the methodologies and management structures that guided the development is presented. Findings: Applying a combination of the…

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

PubMed

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of ergonomic and safety voice principles, and perception and attitudes about ergonomic and safety voice issues. Masons continue to have a high rate of musculoskeletal disorders. The trade has an expected increase of 40 % in the number of workers by 2020. Therefore, a vetted intervention for apprentices entering the trade, such as SAVE, could reduce the burden of musculoskeletal disorders currently plaguing the trade. ClinicalTrials.gov Identifier: NCT02676635 , 2 February 2016.

Dento-ergonomics: the key to energy-saving performance.

PubMed

Pollack, R

1996-04-01

The application of ergonomics to dentistry, or dento-ergonomics, can increase efficiency and prevent injury. Among the factors that need to be considered are the height and reach of staff members, the equipment being used and the distribution of tasks. By implementing the theories of ergonomics, dental care providers can prolong their interest and commitment to dentistry by making difficult or even painful tasks less stressful.

User-friendly program for multitask analysis

NASA Astrophysics Data System (ADS)

Caporali, Sergio A.; Akladios, Magdy; Becker, Paul E.

2000-10-01

Research on lifting activities has led to the design of several useful tools for evaluating tasks that involve lifting and material handling. The National Institute for Occupational Safety and Health (NIOSH) has developed a single task lifting equation. This formula has been frequently used as a guide in the field of ergonomics and material handling. While being much more complicated, the multi-task formula will provide a more realistic analysis for the evaluation of lifting and material handling jobs. A user friendly tool has been developed to assist professionals in the field of ergonomics in analyzing multitask types of material handling jobs. The program allows for up to 10 different tasks to be evaluated. The program requires a basic understanding of the NIOSH lifting guidelines and the six multipliers that are involved in the analysis of each single task. These multipliers are: Horizontal Distance Multiplier (HM), Vertical Distance Multiplier (VM), Vertical Displacement Multiplier (DM), Frequency of lifting Multiplier (FM), Coupling Multiplier (CM), and the Asymmetry Multiplier (AM). Once a given job is analyzed, a researched list of recommendations is provided to the user in an attempt to reduce the potential risk factors that are associated with each task.

The biomechanical demands of manual scaling on the shoulders & neck of dental hygienists.

PubMed

La Delfa, Nicholas J; Grondin, Diane E; Cox, Jocelyn; Potvin, Jim R; Howarth, Samuel J

2017-01-01

The purpose of this study was to evaluate the postural and muscular demands placed on the shoulders and neck of dental hygienists when performing a simulated manual scaling task. Nineteen healthy female dental hygienists performed 30-min of simulated manual scaling on a manikin head in a laboratory setting. Surface electromyography was used to monitor muscle activity from several neck and shoulder muscles, and neck and arm elevation kinematics were evaluated using motion capture. The simulated scaling task resulted in a large range of neck and arm elevation angles and excessive low-level muscular demands in the neck extensor and scapular stabilising muscles. The physical demands varied depending on the working position of the hygienists relative to the manikin head. These findings are valuable in guiding future ergonomics interventions aimed at reducing the physical exposures of dental hygiene work. Practitioner Summary: Given that this study evaluates the physical demands of manual scaling, a procedure that is fundamental to dental hygiene work, the findings are valuable to identify ergonomics interventions to reduce the prevalence of work-related injuries, disability and the potential for early retirement among this occupational group.

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

1998-01-01

Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

Preventing Workplace Injuries and Illnesses through Ergonomics. Listening to Our Pain.

ERIC Educational Resources Information Center

Rosskam, Ellen; Baichoo, Pavan

1997-01-01

Ergonomics focuses on the prevention of injuries through proper design of equipment, workstations, and products. The adoption of an ergonomic philosophy in the workplace has demonstrable benefits. (JOW)

Optimal ergonomics for laparoscopic surgery in minimally invasive surgery suites: a review and guidelines.

PubMed

van Det, M J; Meijerink, W J H J; Hoff, C; Totté, E R; Pierie, J P E N

2009-06-01

With minimally invasive surgery (MIS), a man-machine environment was brought into the operating room, which created mental and physical challenges for the operating team. The science of ergonomics analyzes these challenges and formulates guidelines for creating a work environment that is safe and comfortable for its operators while effectiveness and efficiency of the process are maintained. This review aimed to formulate the ergonomic challenges related to monitor positioning in MIS. Background and guidelines are formulated for optimal ergonomic monitor positioning within the possibilities of the modern MIS suite, using multiple monitors suspended from the ceiling. All evidence-based experimental ergonomic studies conducted in the fields of laparoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches and selected for quality and applicability. Data from ergonomic studies were evaluated in terms of effectiveness and efficiency as well as comfort and safety aspects. Recommendations for individual monitor positioning are formulated to create a personal balance between these two ergonomic aspects. Misalignment in the eye-hand-target axis because of limited freedom in monitor positioning is recognized as an important ergonomic drawback during MIS. Realignment of the eye-hand-target axis improves personal values of comfort and safety as well as procedural values of effectiveness and efficiency. Monitor position is an important ergonomic factor during MIS. In the horizontal plain, the monitor should be straight in front of each person and aligned with the forearm-instrument motor axis to avoid axial rotation of the spine. In the sagittal plain, the monitor should be positioned lower than eye level to avoid neck extension.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria

PubMed Central

Oladeinde, BH; Ekejindu, IM; Omoregie, R; Aguh, OD

2015-01-01

Background: Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. Aim: This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT®. Results: Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Conclusions: Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated. PMID:27057381

Ergonomic design in ancient Greece.

PubMed

Marmaras, N; Poulakakis, G; Papakostopoulos, V

1999-08-01

Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

Ergonomics and quality management--humans in interaction with technology, work environment, and organization.

PubMed

Eklund, J A

1999-01-01

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate important ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elaborate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, inappropriate design of technology, and an unsuitable organization are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain support from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.

'The perfect is the enemy of the good' - ergonomics research and practice. Institute of Ergonomics and Human Factors Annual Lecture 2010.

PubMed

Buckle, Peter

2011-01-01

The relationship between research and practice in ergonomics and human factors has rarely been addressed in the literature. This presents specific problems for researchers when seeking to relate their work to the research community. Equally, practitioners are often frustrated by the lack of appropriate research to meet their needs. This paper seeks to identify current drivers for ergonomics research along with an analysis of how these are changing. Specifically, the use of bibliometric data to assess research output and its impact on a multi-disciplinary subject such as ergonomics is examined. Areas where action may be required to stimulate better research and improved practice are proposed. These include a greater role for the practitioner in completing the circle of knowledge and improving the evidence base for practice with, in particular, practitioners becoming more active in determining research priorities. It is concluded that combined effort is needed by researcher and practitioner communities to enable and promote a more effective understanding of the true impact of ergonomics across industry and society. STATEMENT OF RELEVANCE: The relationship between ergonomics research and practice is examined. Research 'drivers' are identified, including the influence of bibliometric data. Implications for researchers and practitioners are discussed. The role of practitioners in completing the circle of knowledge and improving the ergonomics evidence base is stressed, as is the need to promote the impact of ergonomics across society.

Ergonomic deficits in robotic gynecologic oncology surgery: a need for intervention.

PubMed

Craven, Renatta; Franasiak, Jason; Mosaly, Prithima; Gehrig, Paola A

2013-01-01

To evaluate surgeon strain using validated ergonomic assessment tools. Observational study (Canadian Task Force classification III). Academic medical center. Robotic surgeons performing gynecologic oncology surgical procedures. Videotape footage of surgeons performing robotic gynecologic oncology procedures was obtained. A human factors engineer experienced with health care ergonomics analyzed the video recordings and performed ergonomic evaluations of the surgeons. An initial evaluation was conducted using the Rapid Upper Limb Assessment (RULA) survey, an ergonomic assessment and prioritization method for determining posture, force, and frequency concerns with focus on the upper limbs. A more detailed analysis followed using the Strain Index (SI) method, which uses multiplicative interactions to identify jobs that are potentially hazardous. Seventeen hours of video recordings were analyzed, and descriptive data based on RULA/SI analysis were collected. Ergonomic evaluation of surgeon activity resulted in a mean RULA score of 6.46 (maximum possible RULA score, 7), indicating a need for further investigation. The mean SI grand score was 24.34. SI scores >10 suggest a potential for hazard to the operator. Thus, the current use of the surgical robot is potentially dangerous with regards to ergonomic positioning and should be modified. At a high-volume robotics center, there are ergonomics deficits that are hazardous to gynecologic surgeons and suggest the need for modification and intervention. A training strategy must be developed to address these ergonomic issues and knowledge deficiencies. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

OSHA sets final ergonomics rule.

PubMed

Tabone, S

2001-02-01

After years of advocating for an ergonomic regulation through the Occupational Safety and Health Administration (OSHA), at last on November 14, 2000, the final standards were issued. The OSHA Ergonomic Standards are designed to prevent musculoskeletal injury by matching workplace conditions to job demands. This rule will provide long awaited relief to nurses in direct care who have worked for years without benefit, in most cases, of technology that could have prevented ergonomic injury.

A new ergonomically improved lathe.

PubMed

Harten, G A; Derks, P M

1975-09-01

Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

The effect of a knowledge-based ergonomic intervention amongst administrators at Aga Khan University Hospital, Nairobi.

PubMed

Wanyonyi, Nancy; Frantz, Jose; Saidi, Hassan

2015-01-01

Low back pain (LBP) and neck pain are part of the common work-related musculoskeletal disorders with a large impact on the affected person. Despite having a multifactorial aetiology, ergonomic factors play a major role thus necessitating workers' education. To determine the prevalence of ergonomic-related LBP and neck pain, and describe the effect of a knowledge-based ergonomic intervention amongst administrators in Aga Khan University Hospital, Nairobi. This study applied a mixed method design utilizing a survey and two focus group discussions (FGD). A self-administered questionnaire was distributed to 208 participants through systematic sampling. A one hour knowledge-based ergonomic session founded on the survey results was thereafter administered to interested participants, followed by two FGDs a month later with purposive selection of eight participants to explore their experience of the ergonomic intervention. Quantitative data was captured and analyzed using SPSS by means of descriptive and inferential statistics, whereas thematic content analysis was used for qualitative data. Most participants were knowledgeable about ergonomic-related LBP and neck pain with a twelve month prevalence of 75.5% and 67.8% respectively. Continual ergonomic education is necessary for adherence to health-related behaviours that will preventwork-related LBP and neck pain.

From an urologist view: are we safe with endoscopic surgery? Overview of ergonomic problems encountered by the urologist during video endoscopic surgery.

PubMed

Sataa, Sallami; Benzarti, Aida; Ben Jemaa, Abdelmajid

2012-12-01

The importance of minimally invasive surgery in urology has constantly increased in the last 20 years. Endoscopic resection of prostate and bladder tumors is actually a gold standard with many advantages for patients. To analyze the problems related to the ergonomic conditions faced by urologist during video endoscopic surgery by review of the recent literature. All evidence-based experimental ergonomic studies conducted in the fields of urology endoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches. Data from ergonomic studies were evaluated in terms of efficiency as well as comfort and safety aspects. Constraint postures for urologists are described and ergonomic requirements for optimal positions are discussed. The ergonomics of urological endoscopic surgery place urologists at risk for potential injury. The amount of neck flexion or extension, the amount of shoulder girdle adduction or abduction used, and stability of the upper extremities during surgery; which are maintained in a prolonged static posture; are the main risk factors. All these constraints may lead to muscle and joint fatigue, pain, and eventual musculoskeletal injury. Moreover, these issues may impact surgical accuracy. Urologist posture, operating period, training are important ergonomic factor during video surgery to prevent musculoskeletal disorders.

Construction and application of an indicator system to assess the ergonomic performance of large and medium-sized construction companies.

PubMed

Bezerra, Isabela Xavier Barbalho; de Carvalho, Ricardo José Matos

2012-01-01

This article proposes a system of indicators to evaluate the performance of companies in ergonomics for buildings. The system was developed based primarily on studies related to the performance evaluation of the construction industry and on Brazilian standards of ergonomics and work safety and had also the contribution of national and international indicators related to ergonomics, work safety, quality, sustainability, quality of work life and to organizational behavior. The indicators were named, classified and their components were assigned to compose the theoretical model SIDECE--System of Performance Indicators in Ergonomics for Building Construction (as for the Portuguese acronym), serving the major goals of ergonomics: health, safety and workers' satisfaction and production efficiency. The SIDECE is being validated along with the building construction companies in the city of Natal, Brazil, whose practical results, deriving from the application of instruments to collect field data, are under process, to be presented on the occasion of the 18th World Congress on Ergonomics. It is intended that the SIDECE be used by building construction companies as a support tool for excellence management.

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

PubMed

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

Green buildings need good ergonomics.

PubMed

Hedge, A; Dorsey, J A

2013-01-01

A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

Do we need sustainability as a new approach in human factors and ergonomics?

PubMed

Zink, Klaus J; Fischer, Klaus

2013-01-01

The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

NASA Astrophysics Data System (ADS)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Ergonomics in dentistry.

PubMed

Gupta, Anshul; Bhat, Manohar; Mohammed, Tahir; Bansal, Nikita; Gupta, Gaurav

2014-01-01

Ergonomics is much broader than preventing work‑related musculoskeletal disorders. The successful application of ergo‑ nomics assures high productivity, avoidance of illnesses and injuries, and increased satisfaction among workers. Unsuc‑ cessful application, on the other hand, can lead to work‑related musculoskeletal disorders (MSDs). This article sets forth broad important background information on ergonomics so that the dental practitioner can have a general awareness of ergonomic risk factors as well as some basis for understanding the ongo‑ ing dialogue about ergonomics, its diagnosis, treatment, and regulation. This article provides alternatives to be considered by the practitioner in light of the practitioner's own circumstances, experiences and goals. A practitioner wishing to improve his or her work environment, for whatever reason, may wish to follow an incremental approach to such efforts, as is briefy discussed here. How to cite this article: Gupta A, Bhat M, Mohammed T, Bansal N, Gupta G. Ergonomics in Dentistry. Int J Clin Pediatr Dent 2014;7(1):30-34.

Ergonomic assessment for the task of repairing computers in a manufacturing company: A case study.

PubMed

Maldonado-Macías, Aidé; Realyvásquez, Arturo; Hernández, Juan Luis; García-Alcaraz, Jorge

2015-01-01

Manufacturing industry workers who repair computers may be exposed to ergonomic risk factors. This project analyzes the tasks involved in the computer repair process to (1) find the risk level for musculoskeletal disorders (MSDs) and (2) propose ergonomic interventions to address any ergonomic issues. Work procedures and main body postures were video recorded and analyzed using task analysis, the Rapid Entire Body Assessment (REBA) postural method, and biomechanical analysis. High risk for MSDs was found on every subtask using REBA. Although biomechanical analysis found an acceptable mass center displacement during tasks, a hazardous level of compression on the lower back during computer's transportation was detected. This assessment found ergonomic risks mainly in the trunk, arm/forearm, and legs; the neck and hand/wrist were also compromised. Opportunities for ergonomic analyses and interventions in the design and execution of computer repair tasks are discussed.

Inculcating the ergonomic culture in developing countries: national healthy schoolbag initiative in Sri Lanka.

PubMed

Jayaratne, Kapila

2012-12-01

The aim of this article is to describe a survey on ergonomic factors of classroom environments of school children, their influence on health, and use of research outcomes to launch a healthy schoolbag initiative. Ergonomics have not yet well penetrated relevant fields in industrially developing countries, such as Sri Lanka. One of the crucial parameters of the school environment is ergonomics. Available evidence suggests ergonomic mismatches in classroom settings. Good practice examples in child ergonomic interventions are few in resource-poor contexts. A school-based cross-sectional study was conducted in a district in Sri Lanka with a sample of 1,607 children in Grades 6 to 8 with the use of a stratified multistage cluster sampling method. Many children did experience discomfort related to substandard seating arrangements in the classroom. A significant proportion had to turn their necks to see the blackboard. For many children, seating locations were not changed. There were widespread incompatibilities of classroom furniture with anthropometric dimensions of children. A majority of children perceived discomfort contributed by mismatched classroom furniture. Carriage of school materials was not healthy. Deficiencies were noted in weight, model, ergonomic features, and carrying behavior of bags. Children experienced several negative effects, in part attributable to mismatched ergonomic factors. The schoolbag was considered a priority issue. Findings were disseminated to stakeholders and to media. Solutions were contemplated on bag weight reduction, healthy schoolbag introduction, and behavior change in a collaborative initiative with the Education Ministry. Political, administrative, and business stakeholders were successfully engaged to inculcate an ergonomic culture in an industrially developing country.

Designing an Ergonomically Correct CNC Workstation on a Shoe String Budget.

ERIC Educational Resources Information Center

Lightner, Stan

2001-01-01

Describes research to design and construct ergonomically correct work stations for Computer Numerical Control machine tools. By designing ergonomically correct work stations, industrial technology teachers help protect students from repetitive motion injuries. (Contains 12 references.) (JOW)

Physical ergonomics in veterinary dentistry.

PubMed

DeForge, Donald H

2002-12-01

Ergonomics is the application of a body of knowledge addressing the interactions between man and the total working environment, such as atmosphere, heat, light and sound, as well as all tools and equipment of the workplace. Work related musculoskeletal injuries, caused by poor posture, have been discussed in human dentistry for several years. Veterinary dentistry, as a relatively new specialty within veterinary medicine, should address the ergonomics of poor posture without further delay to prevent work-related injuries. The generalist, as well as the specialist and their technicians, are subject to various neck and back disorders if proper ergonomic recommendations are not followed. This review article highlights basic ergonomic design principles for illumination and posture in veterinary dentistry.

Methodology of Computer-Aided Design of Variable Guide Vanes of Aircraft Engines

ERIC Educational Resources Information Center

Falaleev, Sergei V.; Melentjev, Vladimir S.; Gvozdev, Alexander S.

2016-01-01

The paper presents a methodology which helps to avoid a great amount of costly experimental research. This methodology includes thermo-gas dynamic design of an engine and its mounts, the profiling of compressor flow path and cascade design of guide vanes. Employing a method elaborated by Howell, we provide a theoretical solution to the task of…

Influences of Display Design and Task Management Strategy on Situation Awareness, Performance, and Workload in Process Control Environments

DTIC Science & Technology

2014-12-26

and Ergonomics Society 54th Annual Meeting (pp. 284-288). Human Factors and Ergonomics Society. Miller, C. A., & Parasuraman, R. (2007). Designing ...Factors and Ergonomics Society, 37 (1), 32-64. Gould, J. (1988). How to design usable systems (excerpt). IBM Research Center Hawthorne. In M...Research Past, Present, and Future. Ergonomics in Design : The Quarterly of Human Factors Applications , 21(2), pp. 9-14. Handal, C., & Ikuma, L. H

A Systematic Review of Mixed Methods Research on Human Factors and Ergonomics in Health Care

PubMed Central

Carayon, Pascale; Kianfar, Sarah; Li, Yaqiong; Xie, Anping; Alyousef, Bashar; Wooldridge, Abigail

2016-01-01

This systematic literature review provides information on the use of mixed methods research in human factors and ergonomics (HFE) research in health care. Using the PRISMA methodology, we searched four databases (PubMed, PsycInfo, Web of Science, and Engineering Village) for studies that met the following inclusion criteria: (1) field study in health care, (2) mixing of qualitative and quantitative data, (3) HFE issues, and (4) empirical evidence. Using an iterative and collaborative process supported by a structured data collection form, the six authors identified a total of 58 studies that primarily address HFE issues in health information technology (e.g., usability) and in the work of healthcare workers. About two-thirds of the mixed methods studies used the convergent parallel study design where quantitative and qualitative data were collected simultaneously. A variety of methods were used for collecting data, including interview, survey and observation. The most frequent combination involved interview for qualitative data and survey for quantitative data. The use of mixed methods in healthcare HFE research has increased over time. However, increasing attention should be paid to the formal literature on mixed methods research to enhance the depth and breadth of this research. PMID:26154228

Using digital photogrammetry to conduct an anthropometric analysis of wheelchair users.

PubMed

Barros, Helda Oliveira; Soares, Marcelomárcio

2012-01-01

This study deals with using digital photogrammetry to make an anthropometric analysis of wheelchair users. To analyse the data, Digita software was used, which was made available by means of the agreement of the Design Department of the Federal University of Pernambuco--Brazil--with the Department of Ergonomics of the Technical University of Lisbon--Portugal. Data collection involved a random sample of 18 subjects and occurred in the Biomechanics Laboratory of the Maurice of Nassau Faculty, located in Recife, Pernambuco. The methodology applied comprises the steps of Ergonomic Assessment, Configuration of the Data Base, Taking Digital Photographs, Digitalising the Coordinates and Presentation of Results. 15 structural variables related to static anthropometry were analysed, and 4 functional range variables relating to dynamic anthropometry. The results were presented by analysing personal data, classified by gender, ethnicity and age; by functional analysis of the sample, classified by clinical diagnosis, results of assessing the joints, results of the evaluation through motion and postural evaluation; and of the analysis of the anthropometric sample, which indicated for each variable the number of people, the mean, the standard deviation, and the minimum, median and maximum values.

Ergonomic and usability analysis on a sample of automobile dashboards.

PubMed

Carvalho, Raíssa; Soares, Marcelo

2012-01-01

This is a research study based on an analysis which sets out to identify and pinpoint ergonomic and usability problems found in a sample of automobile dashboards. The sample consisted of three dashboards, of three different makes and characterized as being a popular model, an average model and a luxury model. The examination was conducted by observation, with the aid of photography, notes and open interview, questionnaires and performing tasks with users, the bases of which are on the principles laid down by methodologies. From this it was possible to point to the existence of problems such as: complaints about the layout, lighting, colors, available area, difficult access to points of interaction, such as buttons, and the difficult nomenclature of dials. Later, the findings and recommendations presented show the need for a further, deeper study, using more accurate tools, a larger sample of users, and an anthropometric study focused on the dashboard, since reading and understanding it have to be done quickly and accurately, and that more attention be given to the study of automobile dashboards, particularly in the most popular vehicles in order to maintain the standards of usability, and drivers' comfort and safety.

Optimization of healthcare supply chain in context of macro-ergonomics factors by a unique mathematical programming approach.

PubMed

Azadeh, A; Motevali Haghighi, S; Gaeini, Z; Shabanpour, N

2016-07-01

This study presents an integrated approach for analyzing the impact of macro-ergonomics factors in healthcare supply chain (HCSC) by data envelopment analysis (DEA). The case of this study is the supply chain (SC) of a real hospital. Thus, healthcare standards and macro-ergonomics factors are considered to be modeled by the mathematical programming approach. Over 28 subsidiary SC divisions with parallel missions and objectives are evaluated by analyzing inputs and outputs through DEA. Each division in this HCSC is considered as decision making unit (DMU). This approach can analyze the impact of macro-ergonomics factors on supply chain management (SCM) in healthcare sector. Also, this method ranks the relevant performance efficiencies of each HCSC. In this study by using proposed method, the most effective macro-ergonomics factor on HCSC is identified as "teamwork" issue. Also, this study would help managers to identify the areas of weaknesses in their SCM system and set improvement target plan for the related SCM system in healthcare industry. To the best of our knowledge, this is the first study for macro-ergonomics optimization of HCSC. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

World War II and other historical influences on the formation of the Ergonomics Research Society.

PubMed

Waterson, Patrick

2011-12-01

Little has been written about wartime ergonomics and the role this played in prompting the need for a society dedicated to ergonomics within the UK, namely the formation of the Ergonomics Research Society (ERS) in early 1950. This article aims to fill this gap in our understanding of the history of ergonomics in the UK and provide further details of the types of research undertaken by wartime research groups and committees such as the Institute of Aviation Medicine, Medical Research Council Applied Psychology Unit and the Flying Personnel Research Committee. In addition, the role of societal developments such as wartime links with the USA, the post-war drive to increase productivity and collaboration with industry and the recommendations of government committees in stimulating the work of the ERS are described in detail. This article also offers some reflection on present-day ergonomics in the UK and how this contrasts with the past. STATEMENT OF RELEVANCE: This article will provide practitioners with a historical perspective on the development of ergonomics from its roots in the Second World War. These developments shed light on current trends and challenges within the discipline as a whole.

Developing hands-on ergonomics lessons for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

2006-02-22

By the time students are ready to enter the workforce they have been exposed to up to 20 years of ergonomics risk factors. As technology evolves, it provides more opportunities for intensive repetitive motion and with computers, cell phones, personal digital assistants (PDAs), and electronic games. The average student engages in fewer active physical activities, sit stationary in mismatched furniture in schools for hours and carry heavy backpacks. While long-term effects remain to be identified, increasingly ergonomists and others concerned with musculoskeletal health and wellness, see a need for early ergonomics education. This interactive session provides a hands-on approach tomore » introducing ergonomics to students. Although different approaches may effectively introduce ergonomics at even early stages of development, this program was designed for youth at the middle to high school age. Attendees will participate in four activities designed to introduce ergonomics at an experiential level. The modules focus on grip strength, effective breathing, optimizing your chair, and backpack safety. The workshop will include presentation and worksheets designed for use by teachers with minimal ergonomics training. Feedback from the participants will be sought for further refining the usability and safety of the training package.« less

Implementation of ergonomics in a service unit: challenges and advances.

PubMed

Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

2012-01-01

This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

Developing measures for information ergonomics in knowledge work.

PubMed

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

ERGONOMICS ABSTRACTS 48347-48982.

ERIC Educational Resources Information Center

Ministry of Technology, London (England). Warren Spring Lab.

IN THIS COLLECTION OF ERGONOMICS ABSTRACTS AND ANNOTATIONS THE FOLLOWING AREAS OF CONCERN ARE REPRESENTED--GENERAL REFERENCES, METHODS, FACILITIES, AND EQUIPMENT RELATING TO ERGONOMICS, SYSTEMS OF MAN AND MACHINES, VISUAL, AUDITORY, AND OTHER SENSORY INPUTS AND PROCESSES (INCLUDING SPEECH AND INTELLIGIBILITY), INPUT CHANNELS, BODY MEASUREMENTS,…

Workstation Analysis, Ergonomic Style: Don't Despair, Teaching Ergonomic Workstation Analysis Isn't That Tough; but You Need a Plan.

ERIC Educational Resources Information Center

Merrell, Wayne L.; Zeimet, Denis E.

1994-01-01

Lists 15 principles for working safely with equipment. Describes phases of an ergonomic hazards program to identify and prevent problems and causes of cumulative trauma disorders in the workplace. (SK)

Ten years of experience from interactive ergonomics projects.

PubMed

Eklund, J; Karltun, J

2012-01-01

This paper highlights experiences from ergonomics projects, applying an interactive research approach. The aim of this paper is to summarise experiences from seven interactive ergonomics projects with the aim to improve ergonomics and organizational performance jointly. Results from these seven projects were analysed with a model for assessing sustainable change, including the factors active ownership, professional management, competent project leadership, and involved participants. All factors were found giving support to impact and sustainability of the change projects. However, the role of the researcher is difficult and demanding.

The ergonomics/human factors approach to health sciences libraries.

PubMed Central

Bube, J L

1985-01-01

A review of the literature reveals scant information on the application of ergonomics to health sciences libraries. Ergonomics research has identified and validated many genuine health hazards in business offices and industrial settings. While appearing innocuous, the library environment is affected by these hazards. As sophisticated technology and machinery are introduced into libraries, the human factors must be considered. This paper examines the hazards of the library environment as identified through ergonomics research and makes recommendations for alleviating or eliminating these dangers. PMID:3161572

Application of a mathematical model for ergonomics in lean manufacturing.

PubMed

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Ergonomic office design and aging: a quasi-experimental field study of employee reactions to an ergonomics intervention program.

PubMed

May, Douglas R; Reed, Kendra; Schwoerer, Catherine E; Potter, Paul

2004-04-01

A naturally occurring quasi-experimental longitudinal field study of 87 municipal employees using pretest and posttest measures investigated the effects of an office workstation ergonomics intervention program on employees' perceptions of their workstation characteristics, levels of persistent pain, eyestrain, and workstation satisfaction. The study examined whether reactions differed between younger and older employees. Results revealed that workstation improvements were associated with enhanced perceptions of the workstation's ergonomic qualities, less upper back pain, and greater workstation satisfaction. Among those experiencing an improvement, the perceptions of workstation ergonomic qualities increased more for younger than older employees, supporting the "impressionable years" framework in the psychological literature on aging. Implications for human resources managers are discussed.

Introducing Ergonomics in Two US Elementary Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L; Tien, D

2003-06-25

The increasing presence of computers and other forms of information and communications technology (ICT) in schools has raised concerns in the United States (US) and elsewhere. Children are using computers more than any other age group in the US. It is not known whether early intensive use of ICT predisposes children to future injury. Ergonomics is not included in state curriculum standards or requirements but can be supported by some of the existing standards. Some who believe that children are better off being educated early about ergonomics are taking action to bring ergonomics into elementary and secondary schools. This papermore » describes the process used to introduce ergonomics into two elementary schools in two different states by initiators with two different roles.« less

Computer users' ergonomics and quality of life - evidence from a developing country.

PubMed

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan

2018-06-01

This study is aimed at investigating the quality of workplace ergonomics at various Pakistani organizations and quality of life of computer users working in these organizations. Two hundred and thirty-five computer users (only those employees who have to do most of their job tasks on computer or laptop, and at their office) responded by filling the questionnaire covering questions on workplace ergonomics and quality of life. Findings of the study revealed the ergonomics at those organizations was poor and unfavourable. The quality of life (both physical and mental health of the employees) of respondents was poor for employees who had unfavourable ergonomic environment. The findings thus highlight an important issue prevalent at Pakistani work settings.

Overview of ergonomics built environment.

PubMed

Costa, Ana Paula Lima; Campos, Fábio; Villarouco, Vilma

2012-01-01

This article provides an overview of academic research in the scientific discipline of ergonomics in the context of the built environment, from data collected from journals, conferences and research groups whose focus is the theme of the Ergonomics of Built Environment. Starting from the context of the Ergonomics of Built Environment, it identifies the broadcast media who publish work in this area and its scientific production, seeking to recover from the first published papers to the production of the most recent scientific journals and conferences to be launched 2010. From this mapping, we identified the major outstanding and open issues in these studies, outlining the state of the art Ergonomics Built Environment, in order to inform those interested and intend to develop scientific research in this field.

Flexible workspace design and ergonomics training: impacts on the psychosocial work environment, musculoskeletal health, and work effectiveness among knowledge workers.

PubMed

Robertson, Michelle M; Huang, Yueng-Hsiang; O'Neill, Michael J; Schleifer, Lawrence M

2008-07-01

A macroergonomics intervention consisting of flexible workspace design and ergonomics training was conducted to examine the effects on psychosocial work environment, musculoskeletal health, and work effectiveness in a computer-based office setting. Knowledge workers were assigned to one of four conditions: flexible workspace (n=121), ergonomics training (n=92), flexible workspace+ergonomics training (n=31), and a no-intervention control (n=45). Outcome measures were collected 2 months prior to the intervention and 3 and 6 months post-intervention. Overall, the study results indicated positive, significant effects on the outcome variables for the two intervention groups compared to the control group, including work-related musculoskeletal discomfort, job control, environmental satisfaction, sense of community, ergonomic climate, communication and collaboration, and business process efficiency (time and costs). However, attrition of workers in the ergonomics training condition precluded an evaluation of the effects of this intervention. This study suggests that a macroergonomics intervention is effective among knowledge workers in office settings.

How could you use the ergonomics 'knowhow' transfer management to enhance human working for sustainable improvements in industrially developing countries?

PubMed

Helali, Faramarz

2012-01-01

This paper describes the different strategic understanding from getting ergonomics intervention programmes' conversations to 'Tip', including minimizing strategies; tipping point strategies; and maximizing strategies from building ergonomics intervention techniques. Those have indicated to different recognitions: 1) when amplification of the 'problem' is necessary; 2) when amplification of the 'tipping point' is necessary, and 3) when amplification of the 'success' is necessary. The practical applications and implications of the ergonomics intervention techniques are drawn from the findings of framing positive questions: 1) what is successful ergonomics intervention technique right now (Appreciative)? 2) What do we need to change for a better future (Imagine)? 3) How do we do this (Design)? 4) Who takes action and with what consequences (Act)? This requires re-framing of the ergonomics intervention techniques in an appreciative way, because of, the future action needs to be inspired by those things that participants feel are worth valuing, worth celebrating and sustaining.

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2015-11-01

Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review.

PubMed

Hermawati, Setia; Lawson, Glyn; Sutarto, Auditya Purwandini

2014-01-01

In industrially developing countries (IDC), small and medium enterprises (SMEs) account for the highest proprotion of employment. Unfortunately, the working conditions in SMEs are often very poor and expose employees to a potentially wide range of health and safety risks. This paper presents a comprehensive review of 161 articles related to ergonomics application in SMEs, using Indonesia as a case study. The aim of this paper is to investigate the extent of ergonomics application and identify areas that can be improved to promote effective ergonomics for SMEs in IDC. The most urgent issue found is the need for adopting participatory approach in contrast to the commonly implemented top-down approach. Some good practices in ergonomics application were also revealed from the review, e.g. a multidisciplinary approach, unsophisticated and low-cost solutions, and recognising the importance of productivity. The review also found that more work is still required to achieve appropriate cross-cultural adaptation of ergonomics application.

Ergonomics in Dentistry

PubMed Central

Bhat, Manohar; Mohammed, Tahir; Bansal, Nikita; Gupta, Gaurav

2014-01-01

ABSTRACT Ergonomics is much broader than preventing work‑related musculoskeletal disorders. The successful application of ergo‑ nomics assures high productivity, avoidance of illnesses and injuries, and increased satisfaction among workers. Unsuc‑ cessful application, on the other hand, can lead to work‑related musculoskeletal disorders (MSDs). This article sets forth broad important background information on ergonomics so that the dental practitioner can have a general awareness of ergonomic risk factors as well as some basis for understanding the ongo‑ ing dialogue about ergonomics, its diagnosis, treatment, and regulation. This article provides alternatives to be considered by the practitioner in light of the practitioner's own circumstances, experiences and goals. A practitioner wishing to improve his or her work environment, for whatever reason, may wish to follow an incremental approach to such efforts, as is briefy discussed here. How to cite this article: Gupta A, Bhat M, Mohammed T, Bansal N, Gupta G. Ergonomics in Dentistry. Int J Clin Pediatr Dent 2014;7(1):30-34. PMID:25206234

Ergonomic Guidelines for Designing Effective and Healthy Learning Environments for Interactive Technologies.

ERIC Educational Resources Information Center

Weisberg, Michael

Many of the findings from ergonomics research on visual display workstations are relevant to the design of interactive learning stations. This 1993 paper briefly reviews ergonomics research on visual display workstations; specifically, (1) potential health hazards from electromagnetic radiation; (2) musculoskeletal disorders; (3)vision complaints;…

The Physical Demands and Ergonomics of Working with Young Children.

ERIC Educational Resources Information Center

Gratz, Rene R.; Claffey, Anne; King, Phyllis; Scheuer, Gina

2002-01-01

Examines the physical demands and ergonomic concerns within child care settings. Discusses problem areas and ergonomic recommendations for room design and staff training. Presents important implications for writing job descriptions, determining essential job functions, orienting and training staff, and committing to improving the child care work…

Action in Ergonomics

ERIC Educational Resources Information Center

Training Officer, 1975

1975-01-01

A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

Quality assurance and ergonomics in the mammography department.

PubMed

Reynolds, April

2014-01-01

Quality assurance (QA) in mammography is a system of checks that helps ensure the proper functioning of imaging equipment and processes. Ergonomics is a scientific approach to arranging the work environment to reduce the risk of work-related injuries while increasing staff productivity and job satisfaction. This article reviews both QA and ergonomics in mammography and explains how they work together to create a safe and healthy environment for radiologic technologists and their patients. QA and quality control requirements in mammography are discussed, along with ergonomic best practices in the mammography setting.

Integrating ergonomics knowledge into business-driven design projects: The shaping of resource constraints in engineering consultancy.

PubMed

Hall-Andersen, Lene Bjerg; Neumann, Patrick; Broberg, Ole

2016-10-17

The integration of ergonomics knowledge into engineering projects leads to both healthier and more efficient workplaces. There is a lack of knowledge about integrating ergonomic knowledge into the design practice in engineering consultancies. This study explores how organizational resources can pose constraints for the integration of ergonomics knowledge into engineering design projects in a business-driven setting, and how ergonomists cope with these resource constraints. An exploratory case study in an engineering consultancy was conducted. A total of 27 participants were interviewed. Data were collected applying semi-structured interviews, observations, and documentary studies. Interviews were transcribed, coded, and categorized into themes. From the analysis five overall themes emerged as major constituents of resource constraints: 1) maximizing project revenue, 2) payment for ergonomics services, 3) value of ergonomic services, 4) role of the client, and 5) coping strategies to overcome resource constraints. We hypothesize that resource constraints were shaped due to sub-optimization of costs in design projects. The economical contribution of ergonomics measures was not evaluated in the entire life cycle of a designed workplace. Coping strategies included teaming up with engineering designers in the sales process or creating an alliance with ergonomists in the client organization.

Ergonomics as a tool to improve the sustainability of the workforce.

PubMed

Meyer, Felipe; Eweje, Gabriel; Tappin, David

2017-01-01

The sustainability of the workforce is threatened due to working conditions. One of the reasons for this is an imbalance between the working conditions and the capacity of the workers. The objective of the paper, based on a literature review, is to explore the relationship between two main concepts, beginning with sustainability, and finished with ergonomics. Based on that relationship, determine if ergonomics could be helpful to improve the sustainability of the workforce. Literature review was based on two keywords: sustainability and ergonomics. The focus was on create a theoretical path between these two concepts. The literature review draws on 100 journal articles, books, conference proceedings, thesis and reports. The results of the literature review highlights that an ergonomics approach is helpful and appropriate to determine the mismatch between people capacity and system demand. In that sense, the literature review reveals that both disciplines, ergonomics and sustainability, share the same principles and that the mix of both has significant potential. However, the literature also shows a lack of empirical information that proves that potential. The review first posits that sustainability principles could be helpful to improve the working conditions, and second, that an ergonomics approach provides information related with working conditions, organizations' problems and the needs of workers that would be helpful to create a sustainability workforce.

A trend analysis of ergonomic research themes in Taiwan.

PubMed

Lin, Chih-Long

2015-01-01

This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

Process and implementation of participatory ergonomic interventions: a systematic review.

PubMed

van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

2010-10-01

Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

Surgeons' physical discomfort and symptoms during robotic surgery: a comprehensive ergonomic survey study.

PubMed

Lee, G I; Lee, M R; Green, I; Allaf, M; Marohn, M R

2017-04-01

It is commonly believed that robotic surgery systems provide surgeons with an ergonomically sound work environment; however, the actual experience of surgeons practicing robotic surgery (RS) has not been thoroughly researched. In this ergonomics survey study, we investigated surgeons' physical symptom reports and their association with factors including demographics, specialties, and robotic systems. Four hundred and thirty-two surgeons regularly practicing RS completed this comprehensive survey comprising 20 questions in four categories: demographics, systems, ergonomics, and physical symptoms. Chi-square and multinomial logistic regression analyses were used for statistical analysis. Two hundred and thirty-six surgeons (56.1 %) reported physical symptoms or discomfort. Among those symptoms, neck stiffness, finger, and eye fatigues were the most common. With the newest robot, eye symptom rate was considerably reduced, while neck and finger symptoms did not improve significantly. A high rate of lower back stiffness was correlated with higher annual robotic case volume, and eye symptoms were more common with longer years practicing robotic surgery (p < 0.05). The symptom report rate from urology surgeons was significantly higher than other specialties (p < 0.05). Noticeably, surgeons with higher confidence and helpfulness levels with their ergonomic settings reported lower symptom report rates. Symptoms were not correlated with age and gender. Although RS provides relatively better ergonomics, this study demonstrates that 56.1 % of regularly practicing robotic surgeons still experience related physical symptoms or discomfort. In addition to system improvement, surgeon education in optimizing the ergonomic settings may be necessary to maximize the ergonomic benefits in RS.

A novel approach to supporting relationship-centered care through electronic health record ergonomic training in preclerkship medical education.

PubMed

Silverman, Howard; Ho, Yun-Xian; Kaib, Susan; Ellis, Wendy Danto; Moffitt, Marícela P; Chen, Qingxia; Nian, Hui; Gadd, Cynthia S

2014-09-01

How can physicians incorporate the electronic health record (EHR) into clinical practice in a relationship-enhancing fashion ("EHR ergonomics")? Three convenience samples of 40 second-year medical students with varying levels of EHR ergonomic training were compared in the 2012 spring semester. All participants first received basic EHR training and completed a presurvey. Two study groups were then instructed to use the EHR during the standardized patient (SP) encounter in each of four regularly scheduled Doctoring (clinical skills) course sessions. One group received additional ergonomic training in each session. Ergonomic assessment data were collected from students, faculty, and SPs in each session. A postsurvey was administered to all students, and data were compared across all three groups to assess the impact of EHR use and ergonomic training. There was a significant positive effect of EHR ergonomics skills training on students' relationship-centered EHR use (P<.005). Students who received training reported that they were able to use the EHR to engage with patients more effectively, better articulate the benefits of using the EHR, better address patient concerns, more appropriately position the EHR device, and more effectively integrate the EHR into patient encounters. Additionally, students' self-assessments were strongly corroborated by SP and faculty assessments. A minimum of three ergonomic training sessions were needed to see an overall improvement in EHR use. In addition to replication of these results, further effectiveness studies of this educational intervention need to be carried out in GME, practice, and other environments.

Arm and neck pain in ultrasonographers.

PubMed

Claes, Frank; Berger, Jan; Stassijns, Gaëtane

2015-03-01

The aim of this study was to evaluate the prevalence of upper-body-quadrant pain among ultrasonographers and to evaluate the association between individual ergonomics, musculoskeletal disorders, and occurrence of neck pain. A hundred and ten (N = 110) Belgian and Dutch male and female hospital ultrasonographers were consecutively enrolled in the study. Data on work-related ergonomic and musculoskeletal disorders were collected with an electronic inquiry, including questions regarding ergonomics (position of the screen, high-low table, and ergonomic chair), symptoms (neck pain, upper-limb pain), and work-related factors (consecutive working hours a day, average working hours a week). Subjects with the screen on their left had significantly more neck pain (odds ratio [OR] = 3.6, p = .0286). Depending on the workspace, high-low tables increased the chance of developing neck pain (OR = 12.9, p = .0246). A screen at eye level caused less neck pain (OR = .22, p = .0610). Employees with a fixed working space were less susceptible to arm pain (OR = 0.13, p = .0058). The prevalence of arm pain was significantly higher for the vascular department compared to radiology, urology, and gynecology departments (OR = 9.2, p = .0278). Regarding prevention of upper-limb pain in ultrasonograph, more attention should be paid to the work environment and more specialty to the ultrasound workstation layout. Primary ergonomic prevention could provide a painless work situation for the ultrasonographer. Further research on the ergonomic conditions of ultrasonography is necessary to develop ergonomic solutions in the work environment that will help to alleviate neck and arm pain. © 2014, Human Factors and Ergonomics Society.

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

77 FR 77037 - Procurement List; Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

...-Compatible, 2'' x 8'' NSN: 7920-00-NIB-0545--Scrub Brush, Wire, Knuckle Guard, Long Handle, Ergonomic, 6'' x 1 1/8'', w/built-in scraper NSN: 7920-00-NIB-0547--Scrub Brush, Wire, Stainless, Ergonomic, 5'' NSN: 7920-00-NIB-0558--Scrub Brush, Wire, Black Tempered, Ergonomic, 5'' NSN: 7920-00-NIB-0563--Wire Brush...

The Effects of Training, Feedback, and Participant Involvement in Behavioral Safety Observations on Office Ergonomic Behavior

ERIC Educational Resources Information Center

Sasson, Joseph R.; Austin, John

2005-01-01

Eleven computer terminal operators participated in an experiment that assessed effects of several interventions aimed at increasing safe ergonomic performance. All participants received ergonomics training and performance feedback while six of them collected observations of safe behavior among the remaining five participants. Effects of…

Technology meets ergonomics in the dental clinic: new toys for old games?

PubMed

Rucker, L M

2000-01-01

Although there have been considerable advances in dental equipment, the introduction of such technology has often been piecemeal and "rushed to market." As a result there has been insufficient attention paid to ergonomic considerations and a systematic approach to, and theory of, dental ergonomics have not yet emerged.

Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

PubMed

Mani, Karthik; Provident, Ingrid; Eckel, Emily

2016-01-01

Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

Office ergonomics training and a sit-stand workstation: effects on musculoskeletal and visual symptoms and performance of office workers.

PubMed

Robertson, Michelle M; Ciriello, Vincent M; Garabet, Angela M

2013-01-01

Work Related Musculoskeletal Disorders (WMSDs) among office workers with intensive computer use is widespread and the prevalence of symptoms is growing. This randomized controlled trial investigated the effects of an office ergonomics training combined with a sit-stand workstation on musculoskeletal and visual discomfort, behaviors and performance. Participants performed a lab-based customer service job for 8 h per day, over 15 days and were assigned to: Ergonomics Trained (n = 11) or Minimally Trained (n = 11). The training consisted of: a 1.5-h interactive instruction, a sit/stand practice period, and ergonomic reminders. Ergonomics Trained participants experienced minimal musculoskeletal and visual discomfort across the 15 days, varied their postures, with significantly higher performance compared to the Minimally Trained group who had a significantly higher number of symptoms, suggesting that training plays a critical role. The ability to mitigate symptoms, change behaviors and enhance performance through training combined with a sit-stand workstation has implications for preventing discomforts in office workers. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Understanding knowledge transfer in an ergonomics intervention at a poultry processing plant.

PubMed

Antle, David M; MacKinnon, Scott N; Molgaard, John; Vézina, Nicole; Parent, Robert; Bornstein, Stephen; Leclerc, Louise

2011-01-01

This case study reviews the knowledge transfer (KT) process of implementing a knife sharpening and steeling program into a poultry processing plant via a participatory ergonomics intervention. This ergonomics intervention required stakeholder participation at the company level to move a 'train-the-trainer' program, developed in Québec, Canada, into action on the plant's deboning line. Communications and exchanges with key stakeholders, as well as changes in steeling and production behaviours were recorded. The intervention was assumed to be at least partially successful because positive changes in work operations occurred. Ergonomic-related changes such as those documented have been cited in the academic literature as beneficial to worker health. However, several components cited in literature that are associated with a successful participatory ergonomics intervention were not attained during the project. A Dynamic Knowledge Transfer Model was used to identify KT issues that impacted on the success of train-the-trainer program. A debriefing analysis reveals that a failure to consider key participatory ergonomics factors necessary for success were related to capacity deficits in the knowledge dissemination strategy.

The application of participatory ergonomics in a healthcare setting in Hong Kong.

PubMed

Lee, Edwin W C; Fok, Joan P C; Lam, Augustine T; Law, Rainbow K Y; Szeto, Grace P Y; Li, Philip P K

2014-01-01

Work-related musculoskeletal disorders (WRMDs) are recognized as a major source of significant pain and disability in the healthcare sector. However, they are preventable if appropriate surveillance and intervention programs are implemented. The purpose of this paper is to describe the holistic ergonomic approach that was used to address the multifactorial problems encountered by healthcare workers in their daily work. Using participatory ergonomics, healthcare workers in this study teamed up with management and staff with expertise in ergonomic analysis, design, and implementation of remedies. Selected participatory ergonomic intervention programs targeted at an organizational level are elaborated. Interventions included pre-work stretching, workplace surveillance at a psychiatric department, on-site ergonomic teaching for community nurses, and display screen equipment consultancy. Changes in workplace design, equipment re-arrangement, awareness of proper posture, and adoption of good work practices all play important roles in reducing musculoskeletal disorders among healthcare workers. Prompt occupational medicine and rehabilitation services were also provided to complement the work disability prevention process. The impact of the various intervention programs on staff health, costs and productivity of the organization are simultaneously discussed.

Evolutionary adaptations: theoretical and practical implications for visual ergonomics.

PubMed

Fostervold, Knut Inge; Watten, Reidulf G; Volden, Frode

2014-01-01

The literature discussing visual ergonomics often mention that human vision is adapted to light emitted by the sun. However, theoretical and practical implications of this viewpoint is seldom discussed or taken into account. The paper discusses some of the main theoretical implications of an evolutionary approach to visual ergonomics. Based on interactional theory and ideas from ecological psychology an evolutionary stress model is proposed as a theoretical framework for future research in ergonomics and human factors. The model stresses the importance of developing work environments that fits with our evolutionary adaptations. In accordance with evolutionary psychology, the environment of evolutionary adaptedness (EEA) and evolutionarily-novel environments (EN) are used as key concepts. Using work with visual display units (VDU) as an example, the paper discusses how this knowledge can be utilized in an ergonomic analysis of risk factors in the work environment. The paper emphasises the importance of incorporating evolutionary theory in the field of ergonomics. Further, the paper encourages scientific practices that further our understanding of any phenomena beyond the borders of traditional proximal explanations.

Connections between voice ergonomic risk factors in classrooms and teachers' voice production.

PubMed

Rantala, Leena M; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

2012-01-01

The aim of the study was to investigate if voice ergonomic risk factors in classrooms correlated with acoustic parameters of teachers' voice production. The voice ergonomic risk factors in the fields of working culture, working postures and indoor air quality were assessed in 40 classrooms using the Voice Ergonomic Assessment in Work Environment - Handbook and Checklist. Teachers (32 females, 8 males) from the above-mentioned classrooms recorded text readings before and after a working day. Fundamental frequency, sound pressure level (SPL) and the slope of the spectrum (alpha ratio) were analyzed. The higher the number of the risk factors in the classrooms, the higher SPL the teachers used and the more strained the males' voices (increased alpha ratio) were. The SPL was already higher before the working day in the teachers with higher risk than in those with lower risk. In the working environment with many voice ergonomic risk factors, speakers increase voice loudness and use more strained voice quality (males). A practical implication of the results is that voice ergonomic assessments are needed in schools. Copyright © 2013 S. Karger AG, Basel.

The Minimally Invasive Manipulator: an ergonomic and economic non-robotic alternative for endoscopy?

PubMed

Bosma, Jesse; Aarts, Sanne; Jaspers, Joris

2015-02-01

Since the da Vinci robotic system was introduced, it has been reported to have ergonomic advantages over conventional laparoscopy (COV). High investments associated with this system challenged us to design a more economical, mechanical alternative for improvement of laparoscopic ergonomics: the Minimally Invasive Manipulator (MIM). An earlier reported MIM prototype was investigated. Its shortcomings were input for the establishment of design criteria for a new prototype. A new prototype was developed, aiming at improved intuitiveness and ergonomics. The handle and instrument tip were redesigned and the parallelogram mechanism was converted from linear moving parts to mainly rotating parts. The new prototype was tested by a panel of experts and novices during an indicative ergonomic experiment. A major advantage of the MIM seems to be the possibility to perform laparoscopic surgery in a sitting position, in line with the working axis, instead of standing at the side of the patient. At an estimated cost level of 10% of the da Vinci system, the MIM can be an economical alternative for the enhancement of laparoscopy ergonomics. However, further development for clinical feasibility is necessary.

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers

PubMed Central

ZARE, Mohsen; MALINGE-OUDENOT, Agnes; HÖGLUND, Robert; BIAU, Sophie; ROQUELAURE, Yves

2015-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner’s viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner’s point of view in the automotive assembly plant. PMID:26423331

Does drywall installers' innovative idea reduce the ergonomic exposures of ceiling installation: A field case study.

PubMed

Dasgupta, Priyadarshini Sengupta; Punnett, Laura; Moir, Susan; Kuhn, Sarah; Buchholz, Bryan

2016-07-01

The study was conducted to assess an intervention suggested by the workers to reduce the physical or ergonomic exposures of the drywall installation task. The drywall installers were asked to brainstorm on innovative ideas that could reduce their ergonomic exposures during the drywall installation work. The workers proposed the idea of using a 'deadman' (narrow panel piece) to hold the panels to the ceiling while installing them. The researcher collected quantitative exposure data (PATH, 3DSSPP) at the baseline and intervention phases and compared the phases to find out any change in the exposure while using the 'deadman'. Results showed that ergonomic exposures (such as overhead arm and awkward trunk postures and heavy load handling) were reduced at the intervention phase while using the 'deadman' with an electrically operated lift. The concept of the 'deadman', which was shown to help reduce musculoskeletal exposures during ceiling installation, can be used to fabricate a permanent ergonomic tool to support the ceiling drywall panel. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers.

PubMed

Zare, Mohsen; Malinge-Oudenot, Agnes; Höglund, Robert; Biau, Sophie; Roquelaure, Yves

2016-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner's viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner's point of view in the automotive assembly plant.

Nature: a new paradigm for well-being and ergonomics.

PubMed

Richardson, Miles; Maspero, Marta; Golightly, David; Sheffield, David; Staples, Vicki; Lumber, Ryan

2017-02-01

Nature is presented as a new paradigm for ergonomics. As a discipline concerned with well-being, the importance of natural environments for wellness should be part of ergonomics knowledge and practice. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being. Further, an emerging body of research has found relationships between well-being and a connection to nature, a concept that reveals the integrative character of human experience which can inform wider practice and epistemology in ergonomics. Practitioners are encouraged to bring nature into the workplace, so that ergonomics keeps pace with the move to nature-based solutions, but also as a necessity in the current ecological and social context. Practitioner Summary: Nature-based solutions are coming to the fore to address societal challenges such as well-being. As ergonomics is concerned with well-being, there is a need for a paradigm shift in the discipline. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being.

A study on the ergonomic assessment in the workplace

NASA Astrophysics Data System (ADS)

Tee, Kian Sek; Low, Eugene; Saim, Hashim; Zakaria, Wan Nurshazwani Wan; Khialdin, Safinaz Binti Mohd; Isa, Hazlita; Awad, M. I.; Soon, Chin Fhong

2017-09-01

Ergonomics has gained attention and take into consideration by the workers in the different fields of works recently. It has given a huge impact on the workers comfort which directly affects the work efficiency and productivity. The workers have claimed to suffer from the painful postures and injuries in their workplace. Musculoskeletal disorders (MSDs) is the most common problem frequently reported by the workers. This problem occurs due to the lack of knowledge and alertness from the workers to the ergonomic in their surroundings. This paper intends to review the approaches and instruments used by the previous works of the researchers in the evaluation of the ergonomics. The two main assessment methods often used for ergonomic evaluation are Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). Popular devices are Inertial Measurement Units (IMU) and Microsoft Kinect.

Effect of ergonomics training on agreement between expert and nonexpert ratings of the potential for musculoskeletal harm in manufacturing tasks.

PubMed

Fethke, Nathan B; Merlino, Linda; Gerr, Fred

2013-12-01

To evaluate the effect of ergonomics training on non-ergonomists' ability to recognize and characterize the potential for musculoskeletal harm in manufacturing tasks. Ergonomics training was delivered to members of a participatory ergonomics team in a manufacturing facility. Before and after training, participatory ergonomics team members and the research team rated the potential for musculoskeletal harm for each of 30 tasks. Measures of agreement included Pearson, concordance, and intraclass correlation coefficients. Measures of agreement generally improved after training. The greatest agreement was observed for ratings of the potential for musculoskeletal harm to the low back. The greatest improvement in agreement was observed for ratings of the potential for musculoskeletal harm to the neck/shoulder. The training seemed to improve non-experts' ability to identify the potential for musculoskeletal harm.

Indonesia ergonomics roadmap: where we are going?

PubMed

Wignjosoebroto, Sritomo

2007-12-01

There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least care for the nation.

Successful integration of ergonomics into continuous improvement initiatives.

PubMed

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

Building a framework for ergonomic research on laparoscopic instrument handles.

PubMed

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Physical and psychosocial stress exposures in US dental schools: the need for expanded ergonomics training.

PubMed

Thornton, Linda J; Stuart-Buttle, Carol; Wyszynski, Theresa C; Wilson, Earlena R

2004-03-01

Dental students train in an environment similar to dentists in private practice. The literature reveals that physical and psychosocial stressors in dental schools are associated with adverse health outcomes. While dental educators have provided resources to address psychosocial factors and ergonomics training at the didactic level, the reinforcement of biomechanics at the clinic level has been overlooked. In this article the authors introduce a descriptive analysis of an ergonomics awareness program that expands the ergonomic training by including an assessment of the physical work performed by dental students in the clinic environment.

Implementation of an ergonomics program for the welding department inside a car assembly company.

PubMed

Francisco, Caceres; Edwin, Troya

2012-01-01

The premise for this project is to implement an ergonomics program for the welding department of a car assembly company, considering that this area represents the highest occupational risk in relation to musculoskeletal injuries. The project also allows the demonstration of the different implementation processes of an ergonomics program; it also permits the determination of individual risks faced by workers of the welding department, and finally gives a chance of improving common injuries using the sentinel system. The main challenge is to reduce musculoskeletal injuries and absenteeism among welders through actions implemented by the ergonomics program.

Considering social ergonomics: the effects of HIT on interpersonal relationships between patients and clinicians.

PubMed

Montague, Enid; Asan, Onur

2012-01-01

This study explored physicians' interactions with EHRs to understand the qualities that contribute to patient satisfaction with their use of the technologies and patient satisfaction with physician. Video-taped observations of 100 medical consultations were used to distinguish interaction patterns between physicians and EHRs. Quantified observational methods were used to contribute to ecological validity. Ten primary care physicians and 100 patients from five clinics participated in the study. Visits were videotaped and coded using an objective coding methodology to understand how physicians interacted with electronic health records. Results indicate, a variety of EHR interaction styles may be effective in providing patient-centered care.

The importance of user centered design methods applied to the design of a new workstation: a case study.

PubMed

Duschenes, Ronaldo; Mendes, Andressa; Betiol, Adriana; Barreto, Suzana

2012-01-01

This paper presents a case study of the application of user centered design methodologies in the product development for a line of ergonomic office furniture. The study aimed to analyze the experience of using a workstation from the perspective of two groups of users, installers and end users. The observation of users in their natural context of use not only allowed the development team to identify key needs and strategies of the users, transforming them into design solutions, but mainly it warned them of the importance and impact of user involvement in the product development cycle.

Human reliability in petrochemical industry: an action research.

PubMed

Silva, João Alexandre Pinheiro; Camarotto, João Alberto

2012-01-01

This paper aims to identify conflicts and gaps between the operators' strategies and actions and the organizational managerial approach for human reliability. In order to achieve these goals, the research approach adopted encompasses literature review, mixing action research methodology and Ergonomic Workplace Analysis in field research. The result suggests that the studied company has a classical and mechanistic point of view focusing on error identification and building barriers through procedures, checklists and other prescription alternatives to improve performance in reliability area. However, it was evident the fundamental role of the worker as an agent of maintenance and construction of system reliability during the action research cycle.

State of Science: ergonomics and global issues.

PubMed

Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

2018-02-01

In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

Identification of factors that affect the adoption of an ergonomic intervention among Emergency Medical Service workers.

PubMed

Weiler, Monica R; Lavender, Steven A; Crawford, J Mac; Reichelt, Paul A; Conrad, Karen M; Browne, Michael W

2012-01-01

This study explored factors contributing to intervention adoption decisions among Emergency Medical Service (EMS) workers. Emergency Medical Service workers (n = 190), from six different organisations, participated in a two-month longitudinal study following the introduction of a patient transfer-board (also known as slide-board) designed to ease lateral transfers of patients to and from ambulance cots. Surveys administered at baseline, after one month and after two months sampled factors potentially influencing the EMS providers' decision process. 'Ergonomics Advantage' and 'Patient Advantage' entered into a stepwise regression model predicting 'intention to use' at the end of month one (R (2 )= 0.78). After the second month, the stepwise regression indicated only two factors were predictive of intention to use: 'Ergonomics Advantage,' and 'Endorsed by Champions' (R (2 )= 0.58). Actual use was predicted by: 'Ergonomics Advantage' and 'Previous Tool Experience.' These results relate to key concepts identified in the diffusion of innovation literature and have the potential to further ergonomics intervention adoption efforts. Practitioner Summary. This study explored factors that potentially facilitate the adoption of voluntarily used ergonomics interventions. EMS workers were provided with foldable transfer-boards (slideboards) designed to reduce the physical demands when laterally transferring patients. Factors predictive of adoption measures included perceived ergonomics advantage, the endorsement by champions, and prior tool experience.

[Mechatronic in functional endoscopic sinus surgery. First experiences with the daVinci Telemanipulatory System].

PubMed

Strauss, G; Winkler, D; Jacobs, S; Trantakis, C; Dietz, A; Bootz, F; Meixensberger, J; Falk, V

2005-07-01

This study examines the advantages and disadvantages of a commercial telemanipulator system (daVinci, Intuitive Surgical, USA) with computer-guided instruments in functional endoscopic sinus surgery (FESS). We performed five different surgical FESS steps on 14 anatomical preparation and compared them with conventional FESS. A total of 140 procedures were examined taking into account the following parameters: degrees of freedom (DOF), duration , learning curve, force feedback, human-machine-interface. Telemanipulatory instruments have more DOF available then conventional instrumentation in FESS. The average time consumed by configuration of the telemanipulator is around 9+/-2 min. Missing force feedback is evaluated mainly as a disadvantage of the telemanipulator. Scaling was evaluated as helpful. The ergonomic concept seems to be better than the conventional solution. Computer guided instruments showed better results for the available DOF of the instruments. The human-machine-interface is more adaptable and variable then in conventional instrumentation. Motion scaling and indexing are characteristics of the telemanipulator concept which are helpful for FESS in our study.

Sources and Nature of Secondary School Teachers' Education in Computer-Related Ergonomics

ERIC Educational Resources Information Center

Dockrell, Sara; Fallon, Enda; Kelly, Martina; Galvin, Rose

2009-01-01

Teachers' knowledge of computer-related ergonomics in education will have an effect on the learning process and the work practices of their students. However little is known about teacher education in this area. The study aimed to investigate the sources and nature of secondary school teachers' education about computer-related ergonomics. It also…

Development of an ergonomics device for maintenance of hydraulic generators of Tucuruí hydropower plant.

PubMed

Batista, I C; Gomes, G J C; Teles, C S; Oliveira, P F; Santos, R M; Sassi, A C; Sá, B; V, B; Pardauil, A A

2012-01-01

This paper aims to present an ergonomic device to assist in the maintenance of the units of Tucuruí Hydropower Plant. The development of this ergonomic device made possible to reduce maintenance time, reduce losses caused by billing, improve performance and reduce the physical strain for labors during the execution of services.

77 FR 64326 - Procurement List; Proposed Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-19

...-Compatible, 2'' x 8''. NSN: 7920-00-NIB-0545--Scrub Brush, Wire, Knuckle Guard, Long Handle, Ergonomic, 6'' x 1 1/8'', w/built-in scraper. NSN: 7920-00-NIB-0547--Scrub Brush, Wire, Stainless, Ergonomic, 5''. NSN: 7920-00-NIB-0558--Scrub Brush, Wire, Black Tempered, Ergonomic, 5''. NSN: 7920-00-NIB-0563--Wire...

Effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders among computer workers: a randomized controlled trial.

PubMed

Esmaeilzadeh, Sina; Ozcan, Emel; Capan, Nalan

2014-01-01

The aim of the study was to determine effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders (WUEMSDs) among computer workers. Four hundred computer workers answered a questionnaire on work-related upper extremity musculoskeletal symptoms (WUEMSS). Ninety-four subjects with WUEMSS using computers at least 3 h a day participated in a prospective, randomized controlled 6-month intervention. Body posture and workstation layouts were assessed by the Ergonomic Questionnaire. We used the Visual Analogue Scale to assess the intensity of WUEMSS. The Upper Extremity Function Scale was used to evaluate functional limitations at the neck and upper extremities. Health-related quality of life was assessed with the Short Form-36. After baseline assessment, those in the intervention group participated in a multicomponent ergonomic intervention program including a comprehensive ergonomic training consisting of two interactive sessions, an ergonomic training brochure, and workplace visits with workstation adjustments. Follow-up assessment was conducted after 6 months. In the intervention group, body posture (p < 0.001) and workstation layout (p = 0.002) improved over 6 months; furthermore, intensity (p < 0.001), duration (p < 0.001), and frequency (p = 0.009) of WUEMSS decreased significantly in the intervention group compared with the control group. Additionally, the functional status (p = 0.001), and physical (p < 0.001), and mental (p = 0.035) health-related quality of life improved significantly compared with the controls. There was no improvement of work day loss due to WUEMSS (p > 0.05). Ergonomic intervention programs may be effective in reducing ergonomic risk factors among computer workers and consequently in the secondary prevention of WUEMSDs.

Ergonomics perspective for identifying and reducing internal operative flow disruption for laparoscopic urological surgery.

PubMed

Al-Hakim, Latif; Xiao, Jiaquan; Sengupta, Shomik

2017-12-01

The aim of this study is to examine operative flow disruption that occurs inside the surgical field, (internal operative flow disruption (OFD)), during urological laparoscopies, and to relate those events to external ergonomics environment in terms of monitor location, level of instruments' handles, and location of surgical team members. According to the our best knowledge, this is the first study of its kind. A combination of real and video-aided observational study was conducted in the operating rooms at hospitals in Australia and China. Brain storming sessions were first conducted to identify the main internal OFD events, and the observable reasons, potential external, and latent ergonomic factors were listed. A prospective observational study was then conducted. The observer's records and the related video records of internal surgical fields were analysed. Procedures were categorised into groups based on similarity in ergonomics environment. The mapping process revealed 39 types of internal OFD events resulted from six reasons. A total of 24 procedures were selected and arranged into two groups, each with twelve procedures. Group A was carried out under satisfactory ergonomics environment, while Group B was conducted under unsatisfactory ergonomics environment. A total of 1178 OFD events were detected delaying the total observed operative times (2966 min) by 220 min (7.43%). Average OFD/h in group A was less than 15, while in group B about 29 OFD/h. There are two main latent ergonomics factors affecting the surgeon's performance; non-physiological posture and long-period static posture. The delays and number of internal OFD were nearly doubled where procedures were conducted under unsatisfactory external ergonomics environment. Some events such as stopping operation and irrelevant conversations during long procedures may have a positive influence on the surgeon's performance.

Workplace ergonomics in lean production environments: A literature review.

PubMed

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

Application of a screening method in assessing occupational safety and health of computer workstations.

PubMed

Niskanen, Toivo; Lehtelä, Jouni; Länsikallio, Riina

2014-01-01

Employers and workers need concrete guidance to plan and implement changes in the ergonomics of computer workstations. The Näppärä method is a screening tool for identifying problems requiring further assessment and corrective actions. The aim of this study was to assess the work of occupational safety and health (OSH) government inspectors who used Näppärä as part of their OSH enforcement inspections (430 assessments) related to computer work. The modifications in workstation ergonomics involved mainly adjustments to the screen, mouse, keyboard, forearm supports, and chair. One output of the assessment is an index indicating the percentage of compliance items. This method can be considered as exposure assessment and ergonomics intervention used as a benchmark for the level of ergonomics. Future research can examine whether the effectiveness of participatory ergonomics interventions should be investigated with Näppärä.

Office ergonomics: deficiencies in computer workstation design.

PubMed

Shikdar, Ashraf A; Al-Kindi, Mahmoud A

2007-01-01

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.

Ergonomics in an oral pathology laboratory: Back to basics in microscopy

PubMed Central

Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

2014-01-01

Ergonomics is simply a science focused on “study of work” to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms “ergonomics”, “pathology laboratory”, “microscope”. All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use. PMID:25364157

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

An ergonomics approach model to prevention of occupational musculoskeletal injuries.

PubMed

Koltan, Altan

2009-01-01

The objective of this study was to prevent occupational musculoskeletal injuries. Our workers stacked boxes of ceramics weighing 10-27 kg, making low back pain common in our enterprise. In all the stacking stations, recommended weight limits (RWL) were separately calculated using the revised National Institute for Occupational Health lifting equation. Since the boxes weighed significantly more than the RWL, we developed a new ergonomic design that completely changed the stacking process. The load put on the workers' waist vertebrae in the new and the old stacking methods was compared to evaluate the success of the new ergonomic design, using Newton's third law of motion. Thanks to the new ergonomic design, the load on the workers' vertebrae decreased by 80%. Due to its simple technology and its very low cost compared to robots, the new ergonomic design can be commonly used in enterprises with repeated and constraining stacking.

Ergonomics analyses of five joineries located in Florianópolis-SC, using the LEST Method.

PubMed

Vergara, Lizandra Lupi Garcia; Garcia, Carolina Schwinden; Miranda, Felipe Vergara

2012-01-01

Considering the goal of Ergonomic Work Analysis to establish, from the point of view of workers, safe, healthy, comfortable and efficient environments, this study propose to analyze the work situation of machine operators at five joineries from Florianópolis-SC. For this, it was applied the LEST Method to evaluate the task made by the operators, considering the physical, cognitive and organizational work environment. As results, it was identified the main ergonomics problems of these workstations, presenting an ergonomic diagnosis and their implications on health and safety of workers. As result, it was concluded that the main ergonomics problems at joineries are related with noise, with constant load of weight and with the postures taken. Besides these problems, others were diagnosed, for example, the pressure for workers to comply strictly the task stipulated and also the poor training and capacity of workers.

Integrating ergonomics into engineering design: the role of objects.

PubMed

Hall-Andersen, Lene Bjerg; Broberg, Ole

2014-05-01

The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Corporate ergonomics programme at BCM Airdrie. Boots Contract Manufacturing.

PubMed

Smyth, Joanne

2003-01-01

The production processes at the BCM Airdrie site range from manual loading tasks in the manufacturing areas to high frequency packaging assembly tasks on the production lines. Both are jobs that are known to carry risk to musculoskeletal health, so an ergonomist was appointed to design and co-ordinate an ergonomics programme for the site to control these risks. This paper details the programme that has evolved to proactively manage musculoskeletal risks in the design of both new and existing equipment and processes. The ergonomics procedures described primarily involve the engineers from all areas of the factory, and the process for ergonomics involvement with engineering design projects is described. Shop-floor personnel involvement is considered to be an essential part of the programme and 'Ergonomics Champions' are being trained on the packing lines to monitor the risks that are sometimes introduced with the different designs of product packaging.

Ergonomic risk factor identification for sewing machine operators through supervised occupational therapy fieldwork in Bangladesh: A case study.

PubMed

Habib, Md Monjurul

2015-01-01

Many sewing machine operators are working with high risk factors for musculoskeletal health in the garments industries in Bangladesh. To identify the physical risk factors among sewing machine operators in a Bangladeshi garments factory. Sewing machine operators (327, 83% female), were evaluated. The mean age of the participants was 25.25 years. Six ergonomic risk factors were determined using the Musculoskeletal Disorders risk assessment. Data collection included measurements of sewing machine table and chair heights; this data was combined with information from informal interviews. Significant ergonomic risk factors found included the combination of awkward postures of the neck and back, repetitive hand and arm movements, poor ergonomic workstations and prolonged working hours without adequate breaks; these risk factors resulted in musculoskeletal complaints, sick leave, and switching jobs. One aspect of improving worker health in garment factories includes addressing musculoskeletal risk factors through ergonomic interventions.

Facilitators & Barriers to the Adoption of Ergonomic Solutions in Construction

PubMed Central

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Barnidge, Ellen; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. Methods Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. Results Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes, and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. Conclusions Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. PMID:28195660

Evaluation of a participatory ergonomic intervention process in kitchen work.

PubMed

Pehkonen, Irmeli; Takala, Esa-Pekka; Ketola, Ritva; Viikari-Juntura, Eira; Leino-Arjas, Päivi; Hopsu, Leila; Virtanen, Tuija; Haukka, Eija; Holtari-Leino, Merja; Nykyri, Elina; Riihimäki, Hilkka

2009-01-01

We evaluated a participatory ergonomic intervention process applied in 59 municipal kitchens. In groups of three to five kitchens, the workers participated in eight workshops, and generated and evaluated solutions to optimize musculoskeletal load in their work. An ergonomist initiated and supported the process. By the end, 402 changes were implemented. Evaluative data were collected using research diaries, questionnaires, and focus group interviews. The intervention model proved feasible and the participatory approach was mostly experienced as motivating. The workers' knowledge and awareness of ergonomics increased, which improved their ability to tackle ergonomic problems by themselves. The changes in ergonomics were perceived to decrease physical load and improve musculoskeletal health. As hindering factors for implementation, lack of time and motivation, and insufficient financial resources were mentioned. In addition, the workers expressed a wish for more support from the management, technical staff, and ergonomists.

Corporate ergonomics programme at Ford Motor Company.

PubMed

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

Electromyography and the study of sports movements: a review.

PubMed

Clarys, J P; Cabri, J

1993-10-01

Within electromyography (EMG), a particular specialty has been developed wherein the aim is to use EMG for the study of muscular function and co-ordination. This area of research is usually called kinesiological EMG. The general aims of kinesiological EMG are to analyse the function and co-ordination of muscles in different movements and postures, in healthy subjects as well as in the disabled, in skilled actions as well as during training, in humans as well as in animals, under laboratory conditions as well as during daily or vocational activities. This is often done by a combination of electromyographical and kinesiological or biomechanical measurement techniques. Because there are over 400 skeletal muscles in the human body and both irregular and complex involvement of the muscles may occur in neuromuscular diseases and in voluntary occupational or sports movements, it is impossible to sample all of the muscles of the entire body during the performance of complex motor skills. In addition, the measurement of kinesiological EMG in sport and specific field circumstances, such as the track and/or soccer field, the alpine ski slope, the swimming pool and the ice rink, demands a specific technological and methodological approach, adaptable to both the field and the sport circumstances. Sport movement techniques and skills, training approaches and methods, ergonomic verification of the human-machine interaction have, amongst others, a highly specialized muscular activity in common. The knowledge of such muscular action in all its aspects, its evaluation and its feedback should allow for the optimization of movement, of sports materials, of training possibilities and, in the end, of sports performance. Drawing conclusions from a review of the EMG research of 32 sports, covering over 100 different complex skills, including methodological approaches, is an impossible task. We have attempted to set standards concerning the EMG methodology at the beginning of this review. Electromyography and sports is a vast area and a complete review is impossible, as information will be found scattered in many different journals, including those on the sports sciences, ergonomics, biomechanics, applied physiology, in different congress proceedings, and so on. Consequently, many important aspects and possibly important publications may have been omitted from this review.

A systematic review of mixed methods research on human factors and ergonomics in health care.

PubMed

Carayon, Pascale; Kianfar, Sarah; Li, Yaqiong; Xie, Anping; Alyousef, Bashar; Wooldridge, Abigail

2015-11-01

This systematic literature review provides information on the use of mixed methods research in human factors and ergonomics (HFE) research in health care. Using the PRISMA methodology, we searched four databases (PubMed, PsycInfo, Web of Science, and Engineering Village) for studies that met the following inclusion criteria: (1) field study in health care, (2) mixing of qualitative and quantitative data, (3) HFE issues, and (4) empirical evidence. Using an iterative and collaborative process supported by a structured data collection form, the six authors identified a total of 58 studies that primarily address HFE issues in health information technology (e.g., usability) and in the work of healthcare workers. About two-thirds of the mixed methods studies used the convergent parallel study design where quantitative and qualitative data were collected simultaneously. A variety of methods were used for collecting data, including interview, survey and observation. The most frequent combination involved interview for qualitative data and survey for quantitative data. The use of mixed methods in healthcare HFE research has increased over time. However, increasing attention should be paid to the formal literature on mixed methods research to enhance the depth and breadth of this research. Copyright © 2015. Published by Elsevier Ltd.

The risk of developing repetitive stress injury in seamstresses, in the clothing industry, under the perspective of ergonomic work analysis: a case study.

PubMed

Melo, A S

2012-01-01

This study presents the sewing task with the approach of the ergonomic analysis of the work, in the seam activity in a clothing industry to identify the relationship between the use of different sewing machines and the activity of sewing pants and blouses, which brings larger risk for the development of work related musculoskeletal disorders. It was done a study of transverse and exploratory cut, in that was used a methodology control of multiple analysis of variables. The population objective was the workers that exercise the activity in the section of makings, with 93 workers, being 54,8% sewing auxiliary and 45,2% dressmakers. Most is single (75,3%), has the 2nd complete degree (58,0%) and the medium age was 25 years old. As results were observed that the machines serger, zig zag and traveti are classified as of high risk of developing work related to musculoskeletal disorders, that the postures assumed during the execution of the tasks were classified as bad or terrible, and that the workstations were just classified as reasonable. It was concluded then, that a relationship exists among the task of sewing pants and blouses, and the risk of the development of work related to musculoskeletal disorders.

Measuring the effects of structural turnout suits on firefighter range of motion and comfort.

PubMed

Ciesielska-Wróbel, Izabela; DenHartog, Emiel; Barker, Roger

2017-07-01

Range of motion (ROM) can be restricted by wearing stiff and bulky clothing. This is particularly true of firefighter suits that are constructed using fabric layers to provide thermal protection from fire. This study developed an evaluation technique to quantify the loss of mobility associated with wearing firefighters' protective suits that were deliberately selected to represent similar ergonomic design features. The ROM of 10 firefighters was measured using electro-goniometers attached to their bodies while they wore uniforms and a reference outfit, and performed specific movements. The most restrictive uniform is the Bulky suit that contained additional layers of materials in sleeves and on the knees. The Traditional Suit was more ROM restrictive than Ergonomic. The subjective evaluation of suits supported the objective assessments provided by the electro-goniometers. A 3-D body scanning technique was employed to establish a correlation between the bulkiness of firefighter outfits and subject ROM. Practitioner Summary: This study presents a methodology for measurements of range of motion (ROM) in firefighters wearing personal protective equipment (PPE). Even small differences in designs of PPE may impact firefighters' ROM, which can be detected by electro-goniometers providing measurements if they are attached along the joint to measure limb angular movement.

Advancing Ergonomic Expertise in Occupational Therapists: Using an Online Course to Facilitate Knowledge Acquisition and Application of Ergonomics in Daily Practice

ERIC Educational Resources Information Center

Finch, Denise E.

2012-01-01

Health promotion, prevention of disease and disability, and enhancing participation in meaningful life activities are areas that occupational therapists (OT) can contribute to at the individual, organizational and population levels (AOTA, 2008; Scaffa, Van Slyke & Brownson, 2008). OTs that are skilled in ergonomic assessment and evidence-based…

Ergonomic material-handling device

DOEpatents

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Macroergonomic aspects in the design of development programs in IDCs.

PubMed

Coelho, Denis A; Ferrara, Patricia R; Couvinhas, Ana F; Lima, Tânia M; Walter, Jake K

2012-01-01

This paper revisits three reports on ergonomic aspects of development initiatives taking place in Industrially Developing Countries (IDCs). These include a macro-ergonomics intervention in a habitation community in Cape Verde (aimed at designing solutions contributing to sustainable development), the evolution of poultry growers' control strategies as an integrative broiler operation is introduced in Mozambique, and a set of macro-ergonomic considerations related to the Agro Forestry Village Project in Mozambique. The paper seeks to set the reviewed development endeavors against the backdrop of the goals of ergonomics interventions. This reflection may inform development agents in future processes of design and implementation of integrated community and work systems transformation.

Evaluation of an ergonomics intervention among Nicaraguan coffee harvesting workers.

PubMed

Bao, Stephen; Silverstein, Barbara; Stewart, Kate

2013-01-01

This study evaluated an ergonomics intervention among Nicaraguan coffee harvesting workers, using electromyography and questionnaire survey techniques. Nicaraguan researchers were involved in the study so that they could gain hands-on experience with ergonomics research and applications, and eventually be the specialists conducting ergonomics interventions in Nicaraguan workplaces. Coffee harvesting activities were studied individually and physical hazards were identified accordingly. The results showed decreased muscle loading on the erector spinae muscle and improved comfort reporting in the back region compared to the commonly used baskets. This fulfils the design objective of a newly developed bag that was used in the intervention to reduce physical workload on the coffee harvesting workers. Workers' opinion survey results showed some issues related to the size of the new bag and the lumbar-shoulder belt mechanism. This information can be used in the modification of the bag in the next design. Key players in the process have been identified. Stimulating ergonomics activities in developing countries is suggested by many experts. This study provided an example from coffee workers in Nicaragua. Commonly used job evaluation procedures and physical load quantification methods were used. Ergonomics researchers and practitioners in developing countries may do similar projects on their own in the future.

Crossing levels in systems ergonomics: a framework to support 'mesoergonomic' inquiry.

PubMed

Karsh, Ben-Tzion; Waterson, Patrick; Holden, Richard J

2014-01-01

In this paper we elaborate and articulate the need for what has been termed 'mesoergonomics'. In particular, we argue that the concept has the potential to bridge the gap between, and integrate, established work within the domains of micro- and macroergonomics. Mesoergonomics is defined as an open systems approach to human factors and ergonomics (HFE) theory and research whereby the relationship between variables in at least two different system levels or echelons is studied, and where the dependent variables are human factors and ergonomic constructs. We present a framework which can be used to structure a set of questions for future work and prompt further empirical and conceptual inquiry. The framework consists of four steps: (1) establishing the purpose of the mesoergonomic investigation; (2) selecting human factors and ergonomics variables; (3) selecting a specific type of mesoergonomic investigation; and (4) establishing relationships between system levels. In addition, we describe two case studies which illustrate the workings of the framework and the value of adopting a mesoergonomic perspective within HFE. The paper concludes with a set of issues which could form part of a future agenda for research within systems ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Redesigning the work system of rubber industries based on total ergonomics and ergo-micmac integration

NASA Astrophysics Data System (ADS)

Setiawan, H.

2018-01-01

The factory capacity achievement and the bottleneck reduction of production process at wet-blanket workstations are influenced by the balance of life quality rates and worker’s productivity, along with the worker’s ability and limitations, tasks, organization and work environment. The life quality of workers is indicated by: the reduction of workload, and fatigue. Meanwhile, work productivity is measured by increasing production results per work shift. The optimization of the quality of life and productivity of workers is achieved by redesigning the system and workstations based on ergonomics integrating Total Ergonomics with Ergo-MicMac (Micro Ergonomics and Macro Ergonomics), which includes redesigning wet-blanket folding worktable, regulating the system pattern of working in pairs, giving official break time, giving extra nutritious intakes such as sweet tea and snack Pempek, giving personal protective equipments, and redesigning physical working environments.This study was an experimental study, with treatment by subject design involving 30 workers sampled at a workstation condition before and after Ergonomics based redesign. The findings and conclusions of the study were derived from the reduction of the workload by 16.06%, fatigue by 18.84% and the increase of production results per work shift by 20.29%.

The amount of ergonomics and user involvement in 151 design processes.

PubMed

Kok, Barbara N E; Slegers, Karin; Vink, Peter

2012-01-01

Ergonomics, usability and user-centered design are terms that are well known among designers. Yet, products often seem to fail to meet the users' needs, resulting in a gap between expected and experienced usability. To understand the possible causes of this gap the actions taken by the designer during the design process are studied in this paper. This can show whether and how certain actions influence the user-friendliness of the design products. The aim of this research was to understand whether ergonomic principles and methods are included in the design process, whether users are involved in this process and whether the experience of the designer (in ergonomics/user involvement) has an effect on the end product usability. In this study the design processes of 151 tangible products of students in design were analyzed. It showed that in 75% of the cases some ergonomic principles were applied. User involvement was performed in only 1/3 of the design cases. Hardly any correlation was found between the designers' experience in ergonomic principles and the way they applied it and no correlations were found between the designers' experience in user involvement and the users' involvement in the design process.

Ergonomic intervention for employed persons with rheumatic conditions.

PubMed

Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

2013-01-01

Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

SME Worker Affective (SWA) index based on environmental ergonomics

NASA Astrophysics Data System (ADS)

Ushada, M.; Kusuma Aji, G.; Okayama, T.; Khidir, M.

2018-04-01

Small-Medium sized (SME) is a focal type of Indonesian industry which contributes to national emerging economies. Indonesian goverment has developed employee social security system (BPJS Ketenagakerjaan) to support worker quality of life. However, there were limited research which could assist BPJS Ketenagakerjaan in evaluating worker quality of life. Worker quality of life could be categorized as the highest worker needs or affective states. SME Worker Affective (SWA) index is being concerned as a basic tool to make balance between worker performance and quality of life in workstation of SMEs. The research objectives are: 1) To optimize the environmental ergonomics in SMEs; 2) To quantify SME Worker Affective (SWA) index based on optimized environmental ergonomics. The research advantage is to support Indonesian goverment in monitoring SMEs good practices to its worker quality of life. Simulated annealing optimized the heart rate and environmental ergonomics parameters. SWA index was determined based on comparison between optimized heart rate and environmental ergonomics parameters. SWA index were quantified for 380 data of worker. The evaluation indicated 51.3% worker in affective and 48.7% in non-affective condition. Research results indicated that stakeholders of SMEs should put more attention on environmental ergonomics and worker affective.

Ergonomic factors and production target evaluation in eucalyptus timber harvesting operations in mountainous terrains.

PubMed

de Souza, Amaury Paulo; Minette, Luciano José; Sanches, André Luis Petean; da Silva, Emília Pio; Rodrigues, Valéria Antônia Justino; de Oliveira, Luciana Aparecida

2012-01-01

There are several forest operations involved in Eucalyptus timber harvesting. This study was carried out during brush-cutting; tree felling, bucking, delimbing, piling and manual extraction operations, with the following objectives: a) analyzing, ergonomically, two systems of brush-cutting: one manual and the other semi-mechanized, using two different machines; b) ergonomically evaluating three different brands of pruner machines used in delimbing felled trees. c) determining the feasible target of productivity as a function of ergonomic factors relevant to establish the time of resting pauses for workers in manual and semi-mechanized timber harvesting systems in mountainous terrain. Brush-cutting, either manual or semimechanized, is an activity carried out prior to timber harvesting. It is usually a hard work, with low productivity when compared with mechanized systems. Pruner machines have been used by forest companies, due to the great possibilities to improve productivity, quality and the health of workers. Ergonomics is a discipline that promotes the adequacy of work to the physical and mental characteristics of human beings, seeking to design production systems and products considering relevant aspects, including social, organizational and environmental factors. Companies should consider the ergonomic factor in the determination of daily worker production targets.

Development of an ergonomics guideline for the furniture manufacturing industry.

PubMed

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

Design and implementation of ergonomic performance measurement system at a steel plant in India.

PubMed

Ray, Pradip Kumar; Tewari, V K

2012-01-01

Management of Tata Steel, the largest steel making company of India in the private sector, felt the need to develop a framework to determine the levels of ergonomic performance at its different workplaces. The objectives of the study are manifold: to identify and characterize the ergonomic variables for a given worksystem with regard to work efficiency, operator safety, and working conditions, to design a comprehensive Ergonomic Performance Indicator (EPI) for quantitative determination of the ergonomic status and maturity of a given worksystem. The study team of IIT Kharagpur consists of three faculty members and the management of Tata Steel formed a team of eleven members for implementation of EPI model. In order to design and develop the EPI model with total participation and understanding of the concerned personnel of Tata Steel, a three-phase action plan for the project was prepared. The project consists of three phases: preparation and data collection, detailed structuring and validation of EPI model. Identification of ergonomic performance factors, development of interaction matrix, design of assessment tool, and testing and validation of assessment tool (EPI) in varied situations are the major steps in these phases. The case study discusses in detail the EPI model and its applications.

How to write a surgical clinical research protocol: literature review and practical guide.

PubMed

Rosenthal, Rachel; Schäfer, Juliane; Briel, Matthias; Bucher, Heiner C; Oertli, Daniel; Dell-Kuster, Salome

2014-02-01

The study protocol is the core document of every clinical research project. Clinical research in studies involving surgical interventions presents some specific challenges, which need to be accounted for and described in the study protocol. The aim of this review is to provide a practical guide for developing a clinical study protocol for surgical interventions with a focus on methodologic issues. On the basis of an in-depth literature search of methodologic literature and on some cardinal published surgical trials and observational studies, the authors provides a 10-step guide for developing a clinical study protocol in surgery. This practical guide outlines key methodologic issues important when planning an ethically and scientifically sound research project involving surgical interventions, with the ultimate goal of providing high-level evidence relevant for health care decision making in surgery. Copyright © 2014 Elsevier Inc. All rights reserved.

The PhOCoe Model--ergonomic pattern mapping in participatory design processes.

PubMed

Silva e Santos, Marcello

2012-01-01

The discipline and practice of human factors and ergonomics is quite rich in terms of the availability of analysis, development and evaluation tools and methods for its various processes. However, we lack effective instruments to either map or regulate comprehensively and effectively, cognitive and organizational related impacts, especially the environmental ones. Moreover, when ergonomic transformations through design - such as a new workstation design or even an entire new facility - is at play, ergonomics professionals tend to stay at bay, relying solely on design professionals and engineers. There is vast empirical evidence showing that participation of ergonomists as project facilitators, may contribute to an effective professional synergy amongst the various stakeholders in a multidisciplinary venue. When that happens, everyone wins - users and designers alike -because eventual conflicts, raised up in the midst of options selection, are dissipated in exchange for more convergent design alternatives. This paper presents a method for participatory design, in which users are encouraged to actively participate in the whole design process by sharing their real work activities with the design team. The negotiated results inferred from the ergonomic action and translated into a new design, are then compiled into a "Ergonomic Pattern Manual". This handbook of ergonomics-oriented design guidelines contains essential guidelines to be consulted in recurrent design project situations in which similar patterns might be used. The main drive is simple: nobody knows better than workers themselves what an adequate workplace design solution (equipment, workstation, office layout) should be.

Effects of measurement errors on psychometric measurements in ergonomics studies: Implications for correlations, ANOVA, linear regression, factor analysis, and linear discriminant analysis.

PubMed

Liu, Yan; Salvendy, Gavriel

2009-05-01

This paper aims to demonstrate the effects of measurement errors on psychometric measurements in ergonomics studies. A variety of sources can cause random measurement errors in ergonomics studies and these errors can distort virtually every statistic computed and lead investigators to erroneous conclusions. The effects of measurement errors on five most widely used statistical analysis tools have been discussed and illustrated: correlation; ANOVA; linear regression; factor analysis; linear discriminant analysis. It has been shown that measurement errors can greatly attenuate correlations between variables, reduce statistical power of ANOVA, distort (overestimate, underestimate or even change the sign of) regression coefficients, underrate the explanation contributions of the most important factors in factor analysis and depreciate the significance of discriminant function and discrimination abilities of individual variables in discrimination analysis. The discussions will be restricted to subjective scales and survey methods and their reliability estimates. Other methods applied in ergonomics research, such as physical and electrophysiological measurements and chemical and biomedical analysis methods, also have issues of measurement errors, but they are beyond the scope of this paper. As there has been increasing interest in the development and testing of theories in ergonomics research, it has become very important for ergonomics researchers to understand the effects of measurement errors on their experiment results, which the authors believe is very critical to research progress in theory development and cumulative knowledge in the ergonomics field.

Ergonomic audit of a specially engineered sonic powered toothbrush with unique sensing and control technologies, the Sonicare Flexcare, and the Oral-B Smart Series 5000.

PubMed

Hunter, Gail; Burns, Laurie; Bone, Brian; Mintel, Thomas; Jimenez, Eduardo

2012-01-01

The presence of ergonomic features can impact the marketplace success of a new product. Metaphase Design Group, Inc., in partnership with the Colgate-Palmolive Company, conducted an ergonomic audit on three electric toothbrushes: a specially engineered sonic powered toothbrush with unique sensing and control technologies, the Sonicare FlexCare, and the Oral-B Smart Series 5000. The ergonomic audit was conducted by Metaphase Design Groups's ergonomic and usability experts. Two experts used the toothbrushes over a one-week period and assessed the performance of each brush against a set of ergonomic principles. The three toothbrushes have some solid ergonomic features. They each have adequate grip zones, provide grip security with elastomeric materials, and provide easy access to the on/off button. The most distinctive feature is the longitudinal shape of the handle of the specially engineered sonic powered toothbrush with unique sensing and control technologies. This handle angles downward at the top end and provides additional advantages through improved grip security and visibility. Yet all three toothbrushes have different opportunities for improvement. The Sonicare Flex Care toothbrush has a cluttered and complicated user interface that is difficult to read. The disadvantages of the Oral-B Smart Series 5000 toothbrush are related to its physical dimensions and audible feedback. The specially engineered sonic powered toothbrush with unique sensing afid control technologies is surprising to use with its changes in speeds, brush movements, and resulting changes in audible feedback.

Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery.

PubMed

Sancibrian, Ramon; Gutierrez-Diez, María C; Torre-Ferrero, Carlos; Benito-Gonzalez, Maria A; Redondo-Figuero, Carlos; Manuel-Palazuelos, Jose C

2014-05-01

Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand. The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values. The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced. The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist. Copyright © 2014 Elsevier Inc. All rights reserved.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

PubMed

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Perceived competence in computer use as a moderator of musculoskeletal strain in VDU work: an ergonomics intervention case.

PubMed

Tuomivaara, S; Ketola, R; Huuhtanen, P; Toivonen, R

2008-02-01

Musculoskeletal strain and other symptoms are common in visual display unit (VDU) work. Psychosocial factors are closely related to the outcome and experience of musculoskeletal strain. The user-computer relationship from the viewpoint of the quality of perceived competence in computer use was assessed as a psychosocial stress indicator. It was assumed that the perceived competence in computer use moderates the experience of musculoskeletal strain and the success of the ergonomics intervention. The participants (n = 124, female 58%, male 42%) worked with VDU for more than 4 h per week. They took part in an ergonomics intervention and were allocated into three groups: intensive; education; and reference group. Musculoskeletal strain, the level of ergonomics of the workstation assessed by the experts in ergonomics and amount of VDU work were estimated at the baseline and at the 10-month follow-up. Age, gender and the perceived competence in computer use were assessed at the baseline. The perceived competence in computer use predicted strain in the upper and the lower part of the body at the follow-up. The interaction effect shows that the intensive ergonomics intervention procedure was the most effective among participants with high perceived competence. The interpretation of the results was that an anxiety-provoking and stressful user-computer relationship prevented the participants from being motivated and from learning in the ergonomics intervention. In the intervention it is important to increase the computer competence along with the improvements of physical workstation and work organization.

Integrating ergonomics into production system development--the Volvo Powertrain case.

PubMed

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

International Ergonomics Association Activities and Constituent Societies

DTIC Science & Technology

1988-05-01

science, home economics, psychology and social science. The research papers presented at the annual meeting reflect this broad range of interests...of health of the Polish population, general problems of social and human development, as well as ergonomic issues in architecture, design, and the...Ergonomics Society C. N. Ong Department of Social Medicine and Public Health National University of Singapore Lower Kent Ridge Road Singapore 0511

Human Support Issues and Systems for the Space Exploration Initiative: Results from Project Outreach

DTIC Science & Technology

1991-01-01

that human factors were responsible for mission failure more often than equipment factors. Spacecraft habitability and ergonomics also require more...substantial challenges for designing reliable, flexible joints and dexterous, reliable gloves. Submission #100701 dealt with the ergonomics of work...perception that human factors deals primarily with cockpit displays and ergonomics . The success of long-duration missions will be highly dependent on

Ergonomic design for dental offices.

PubMed

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Evaluating the ergonomics of a student learning environment.

PubMed

Rudolf, Michelle; Griffiths, Yolanda

2009-01-01

Ergonomics is a key consideration of a student-learning environment. This paper examines aspects of ergonomics and application to the design of tables in three classrooms at a Midwestern university. Custom tables with power outlets and Internet access via Ethernet data ports were planned for classrooms in 2000 to facilitate a laptop program. However, table height, specifically thigh clearance from the seat to the bottom of the work surface, was not fully considered. The ergonomic analysis of the classrooms by an occupational therapy student led to the implementation of positive changes to the tables. The enhancement of the learning environment influences student comfort and productivity and can offset the cost of renovating the tables.

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers.

PubMed

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg; Jørgensen, Marie Birk; Søgaard, Karen; Holtermann, Andreas

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors were physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors (e.g. time, financial resources, collaboration with resident or relatives) constituted 53% of the barriers and 25% of the facilitators. This study revealed the processes and implementation of a participatory ergonomics program among eldercare workers. The findings can be transferred to workers, workplaces, health and safety professionals, and researchers to improve future participatory ergonomics programs. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Reduction of work-related musculoskeletal risk factors following ergonomics education of sewing machine operators.

PubMed

Bulduk, Sıdıka; Bulduk, Emre Özgür; Süren, Tufan

2017-09-01

Work-related musculoskeletal disorders (WMSDs) are a major hazard for sewing machine operators. Ergonomics education is recommended for reducing musculoskeletal disorders at workstations. This study aimed to evaluate the effect of an ergonomics education in reducing the exposure to risk factors for WMSDs among sewing machine operators. In this study of 278 workers, their exposure to the risk of WMSDs was assessed using the quick exposure check scale prior to them attending an ergonomics education programme and then again 3 months after the programme. The scores for risk exposure before the education programme were moderate for back (static) and back (dynamic), high for shoulder/arm and very high for wrist/hand and neck. The results obtained 3 months later were low for back (static) and shoulder/arm, and moderate for back (dynamic), wrist/hand and neck. Based on our results, ergonomics education can reduce the exposure to risk factors for WMSDs in the workplace.

Ergonomics in the computer workstation.

PubMed

Karoney, M J; Mburu, S K; Ndegwa, D W; Nyaichowa, A G; Odera, E B

2010-09-01

Awareness of effects of long term use of computer and application of ergonomics in the computer workstation is important for preventing musculoskeletal disorders, eyestrain and psychosocial effects. To determine the awareness of physical and psychological effects of prolonged computer usage and application of ergonomicsin the workstation. One hundred and eighty one people were interviewed from tertiary educational institutions, telecommunications and media houses within Nairobi, Kenya. Descriptive cross sectional study. Majority (89.8%) of the respondents felt that prolonged computer use had an adverse effect on their health, with only 12.4% having received formal training on the same. Assessment of their workstations revealed the most applied ergonomic measure as feet placement on the floor: 100% (181) followed by correct monitor placement with 94.4% (171) fulfilling the requirements. The least applied ergonomic measures were non reflecting wall paint: 5% (9) and adjustable desk 9.9% (18). There is awareness among computer users on the effects of prolonged computer use but there is limited application of ergonomic measures.

The effects of ergonomics training on the knowledge, attitudes, and practices of teleworkers.

PubMed

Harrington, Susan S; Walker, Bonnie L

2004-01-01

The rapid growth of teleworking has raised several social and legal issues regarding an employer's responsibility for the safety of an employee's home office. In this paper, researchers discuss the need for safety training for teleworkers and the effectiveness of a home office ergonomics training program. Study participants (N = 50) were randomly assigned into a treatment or control group. The treatment group completed the ergonomics training and a pre- and posttest. The control group completed the pre- and posttests without training. The study demonstrated the need for teleworker ergonomics training. More than 85% of participants had not received teleworker training before, and 44% had experienced pain or discomfort while teleworking. Participants who completed the training significantly improved their scores on knowledge, attitude, and practices subtests. In a follow-up survey, participants indicated that they had made ergonomic changes to their offices based on the training. Several participants indicated that the pain or discomfort that they had been experiencing was eliminated or reduced as a result of the training.

Conceptual design of semi-automatic wheelbarrow to overcome ergonomics problems among palm oil plantation workers

NASA Astrophysics Data System (ADS)

Nawik, N. S. M.; Deros, B. M.; Rahman, M. N. A.; Sukadarin, E. H.; Nordin, N.; Tamrin, S. B. M.; Bakar, S. A.; Norzan, M. L.

2015-12-01

An ergonomics problem is one of the main issues faced by palm oil plantation workers especially during harvesting and collecting of fresh fruit bunches (FFB). Intensive manual handling and labor activities involved have been associated with high prevalence of musculoskeletal disorders (MSDs) among palm oil plantation workers. New and safe technology on machines and equipment in palm oil plantation are very important in order to help workers reduce risks and injuries while working. The aim of this research is to improve the design of a wheelbarrow, which is suitable for workers and a small size oil palm plantation. The wheelbarrow design was drawn using CATIA ergonomic features. The characteristic of ergonomics assessment is performed by comparing the existing design of wheelbarrow. Conceptual design was developed based on the problems that have been reported by workers. From the analysis of the problem, finally have resulting concept design the ergonomic quality of semi-automatic wheelbarrow with safe and suitable used for palm oil plantation workers.

A new system for evaluation of armrest use in robotic surgery and validation of a new ergonomic concept - armrest load.

PubMed

Yang, K; Perez, M; Perrenot, C; Hubert, N; Felblinger, J; Hubert, J

2016-12-01

The da Vinci robot provides a sitting position and an armrest to decrease workload and increase dexterity. We investigated the surgeon's ergonomic behaviour by installing force sensors on the dV-Trainer® simulator's armrest to measure the 'armrest load' during the performance of simulated exercises. Five experts and 48 novices performed two robotic simulation exercises on the dV-Trainer. We calculated the armrest load and evaluated their armrest-using habits. Overall score and workspace range were evaluated automatically by the simulator and compared with armrest load. Statistically significant differences exist for overall score, workspace range and armrest load between novices and experts. The armrest load score is a direct, sensitive measure for the ergonomic evaluation of a simulator's armrest use. This experience-dependent ergonomic difference between experts and novices (p = 0.007) highlights the importance of ergonomic training for novice robot users. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Ergonomic evaluation of 3D plane positioning using a mouse and a haptic device.

PubMed

Paul, Laurent; Cartiaux, Olivier; Docquier, Pierre-Louis; Banse, Xavier

2009-12-01

Preoperative planning and intraoperative assistance are needed to improve accuracy in tumour surgery. To be accepted, these processes must be efficient. An experiment was conducted to compare a mouse and a haptic device, with and without force feedback, to perform plan positioning in a 3D space. Ergonomics and performance factors were investigated during the experiment. Positioning strategies were observed. The task completion time, number of 3D orientations and failure rate were analysed. A questionnaire on ergonomics was filled out by each participant. The haptic device showed a significantly lower failure rate and was quicker and more ergonomic than the mouse. The force feedback was not beneficial to the accomplishment of the task. The haptic device is intuitive, ergonomic and more efficient than the mouse for positioning a 3D plane into a 3D space. Useful observations regarding positioning strategies will improve the integration of haptic devices into medical applications. Copyright (c) 2009 John Wiley & Sons, Ltd.

Ergonomics issues in national identity card for homeland security.

PubMed

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Remote online ergonomic assessment in the office environment as compared to face-to-face ergonomic assessment.

PubMed

Eyal, Levy; Ribak, Joseph; Badihi, Yehuda

2012-01-01

remote online ergonomic assessment in the office environment as compared to face-to-face ergonomic assessment and examination of the applicability of remote online ergonomic assessment to office workers. 40 employees from a large Israeli hi-tech company were ergonomically assessed per the University of California computer usage checklist, according to the two assessment types (face-to-face and remote). An additional Ergonomist "assessor 2" examined the credibility of the process. Research hypothesis 1 was verified: 21 out of 22 questions (95.45%) from the checklist indicated compatibility between "assessor 1" to the "Gold Standard" at an 80% level. Research hypothesis 2: examining the credibility between the assessors with regard to remote assessment. This hypothesis was partially verified, the correlation between the assessors was measured at 0.54. Research hypothesis 3: examining the extent of deviation of natural posture between distal body parts assessment (distant from the center of the body) and proximal body parts (close to the center of the body). This hypothesis was clearly verified. It has been proven that there is statistical significance between the results. The current research has proved that there is an additional method to assess musculoskeletal disorders risk factors remotely online at office environment.

Mass of materials: the impact of designers on construction ergonomics.

PubMed

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

A study of trade-specific occupational ergonomics considerations in the U.S. construction industry.

PubMed

Choi, Sang D

2012-01-01

The aim of this survey study was to identify trade-specific ergonomic issues, and discuss practical solutions to reduce work-related musculoskeletal disorders (WMSDs) and injuries in the construction industry. Thirty-two construction firms in the Midwestern United States completed the final survey questionnaire. Twelve different construction skilled trades participated included: general contractor, road, heavy and highway, concrete, electrical, carpentry, landscaping, plumbing, roofing, steel erection, street lighting/traffic signal, and utility construction. Total workforce of the participating companies numbered 11,118 employees. More than 90% of the participants in the survey had a written safety program; however, the majority of the firms did not have a trade-specific ergonomic intervention. The survey revealed that construction constructors perceived safety (worker well-being) as a high priority in their company. This study suggested that construction skilled-trade jobs the construction worker to employ trade-specific hand tools and working body positions that may contribute to different types of WMSD risks, body parts injured, and injury sources. Possible practical construction trade-specific ergonomic solutions might be considered includinge: selection of ergonomic hand tools, reduction of weight of construction materials, and promotion of wellness exercises. This paper may imply that need for more trade-specific ergonomics program elements to help alleviate the work-related musculoskeletal problems in the construction field.

Insights into ergonomics among dental professionals of a dental institute and private practitioners in hubli-dharwad twin cities, India.

PubMed

Kalghatgi, Shrivardhan; Prasad, Kakarla Veera Venkata; Chhabra, Kumar Gaurav; Deolia, Shravani; Chhabra, Chaya

2014-12-01

To assess the knowledge, attitude, and practice of ergonomics among dental professionals of Hubli-Dharwad twin cities, India. Investigator-developed, self-administered, closed-ended questionnaire assessing knowledge, attitude, and practices regarding ergonomics during dental practice was filled in by undergraduates, house surgeons, postgraduates, and faculty members of dental institutions and private practitioners from Hubli-Dharwad twin cities. Data were collected from a total of 250 participants, 50 belonging to each academic group. Overall mean knowledge, attitude, and practice scores were 52%, 75%, and 55%, respectively. Significant correlation was found for age with attitude (χ(2) = 10.734, p = 0.030) and behavior (χ(2) = 12.984, p = 0.011). Marital status was significantly associated with all the three domains; knowledge (χ(2) = 29.369, p = 0.000), attitude (χ(2) = 29.023, p = 0.000), and practices (χ(2) = 13.648, p = 0.009). Participants had considerable awareness and behavior toward ergonomics in dental practice. The high attitude score indicates stronger acceptance of ergonomics principles and guidelines during routine dental procedures. The current study highlights the situation of ergonomics in dental practice in the form of knowledge, attitude, and practices.

The demands and benefits of ergonomics in Sri Lankan apparel industry: A case study at MAS holdings.

PubMed

Abeysekera, John; Illankoon, Prasanna

2016-10-17

Apparel exports bring in sizeable foreign income to Sri Lanka. To protect and promote this industry is a paramount need. This can be carried out by applying Human Factors/Ergonomics (HFE) which has proved to control negative effects at work places. This paper reports a case study which describes the demands and benefits of HFE in MAS Holdings which owns a large share of the apparel industry in Sri Lanka. The study consisted of walk through observation survey, a questionnaire survey and ergonomic work place analysis followed by a training programme to selected employees in three companies. Positive responses to questionnaires revealed good ergonomic practices in the work places surveyed. Ergonomically unfit chairs and potential hazards e.g. exposure to noise and hot environment were detected. It is seen that MAS have introduced strategies originated by Toyota Production System viz. 5S, Kaizen, six sigma etc., which are in fact ergonomic methods. A progressive project MAS boast of viz. 'MAS Operating System' (MOS) empowers training and development to employees. MAS Holdings has adequately realized the benefits of applying HFE as evident by the number of awards received. Relevant companies were advised to take appropriate corrective measures to control the potential hazards.

Ergonomics action research I: shifting from hypothesis testing to experiential learning.

PubMed

Neumann, W P; Dixon, S M; Ekman, M

2012-01-01

This paper presents the case for the need for 'Action Research' (AR) approaches to gain understanding of how ergonomics considerations can best be integrated into the design of new work systems. The AR researchers work collaboratively with other stakeholders to solve a real-world problem: gaining insight into the problem and factors influencing solution building from an embedded position in the development process. This experience is interpreted in terms of available theory and can support further theory development. This non-experimental approach can help provide practical new approaches for integrating ergonomics considerations into real work system design processes. The AR approach suffers from a lack of acceptance by conventionally trained scientists. This paper aims to help overcome this weakness by developing the underlying theory and rationale for using AR approaches in ergonomics research. We propose further development of hybrid approaches which incorporate other evaluation techniques to extend the knowledge gains from AR projects. Researchers should engage directly with organisations in ergonomics projects so that they can better understand the challenges and needs of practitioners who are trying to apply available scientific knowledge in their own unique context. Such 'Action Research' could help develop theory and approaches useful to improve mobilisation and application of ergonomics knowledge in organisations.

A Novel Approach to Supporting Relationship-Centered Care Through Electronic Health Record Ergonomic Training in Preclerkship Medical Education

PubMed Central

Silverman, Howard; Ho, Yun-Xian; Kaib, Susan; Ellis, Wendy Danto; Moffitt, Marícela P.; Chen, Qingxia; Nian, Hui; Gadd, Cynthia S.

2014-01-01

Problem How can physicians incorporate the electronic health record (EHR) into clinical practice in a relationship-enhancing fashion (“EHR ergonomics”)? Approach Three convenience samples of 40 second-year medical students with varying levels of EHR ergonomic training were compared in the 2012 spring semester. All participants first received basic EHR training and completed a pre-survey. Two study groups were then instructed to use the EHR during the standardized patient (SP) encounter in each of four regularly scheduled Doctoring (clinical skills) course sessions. One group received additional ergonomic training in each session. Ergonomic assessment data were collected from students, faculty, and SPs in each session. A post-survey was administered to all students, and data were compared across all three groups to assess the impact of EHR use and ergonomic training. Outcomes There was a significant positive effect of EHR ergonomics skills training on students’ relationship-centered EHR use (P < .005). Students who received training reported that they were able to use the EHR to engage with patients more effectively, better articulate the benefits of using the EHR, better address patient concerns, more appropriately position the EHR device, and more effectively integrate the EHR into patient encounters. Additionally, students’ self-assessments were strongly corroborated by SP and faculty assessments. A minimum of three ergonomic training sessions was needed to see an overall improvement in EHR use. Next Steps In addition to replication of these results, further effectiveness studies of this educational intervention need to be carried out in GME, practice, and other environments. PMID:24826851

A randomized controlled trial of the effect of participatory ergonomic low back pain training on workplace improvement

PubMed Central

Kajiki, Shigeyuki; Izumi, Hiroyuki; Hayashida, Kenshi; Kusumoto, Akira; Nagata, Tomohisa; Mori, Koji

2017-01-01

Objectives: This study aimed to determine the effects of participatory workplace improvement (PWI) -based provision of ergonomic training and ergonomic action checklists (ACLs) to on-site managers on workplace improvement activities for low back pain (LBP). Methods: A randomized controlled trial (RCT) was conducted at a manufacturing company in Japan. Teams entered in the study were randomly assigned to a control and an intervention group. A total of three interventional training sessions on methods of ergonomics were provided to on-site managers in the intervention group, with 1-month intervals between sessions. Ergonomic ACLs were provided at the same time. After completion of the training sessions, each team then provided a report of improvements each month for the next 10 months. Two people in charge of safety and health chose two major objectives of the implemented activities from the five categories. The reported number of improvements was analyzed using a Poisson regression model. Results: In the intervention group, although the incident rate ratio (IRR) of PWIs in countermeasures for the LBP category was significantly elevated after the training sessions, the IRR of improvements decreased over time during the 10-month follow-up period. No significant difference was observed in the IRR of total PWIs in either the control or intervention group. Conclusions: PWI-based provision of ergonomic training sessions and ergonomics ACLs to on-site managers was shown to be effective for workplace improvement activities targeted at LBP. However, because the effects decrease over time, efforts should be made to maintain the effects through regular interventions. PMID:28320978

A randomized controlled trial of the effect of participatory ergonomic low back pain training on workplace improvement.

PubMed

Kajiki, Shigeyuki; Izumi, Hiroyuki; Hayashida, Kenshi; Kusumoto, Akira; Nagata, Tomohisa; Mori, Koji

2017-05-25

This study aimed to determine the effects of participatory workplace improvement (PWI) -based provision of ergonomic training and ergonomic action checklists (ACLs) to on-site managers on workplace improvement activities for low back pain (LBP). A randomized controlled trial (RCT) was conducted at a manufacturing company in Japan. Teams entered in the study were randomly assigned to a control and an intervention group. A total of three interventional training sessions on methods of ergonomics were provided to on-site managers in the intervention group, with 1-month intervals between sessions. Ergonomic ACLs were provided at the same time. After completion of the training sessions, each team then provided a report of improvements each month for the next 10 months. Two people in charge of safety and health chose two major objectives of the implemented activities from the five categories. The reported number of improvements was analyzed using a Poisson regression model. In the intervention group, although the incident rate ratio (IRR) of PWIs in countermeasures for the LBP category was significantly elevated after the training sessions, the IRR of improvements decreased over time during the 10-month follow-up period. No significant difference was observed in the IRR of total PWIs in either the control or intervention group. PWI-based provision of ergonomic training sessions and ergonomics ACLs to on-site managers was shown to be effective for workplace improvement activities targeted at LBP. However, because the effects decrease over time, efforts should be made to maintain the effects through regular interventions.

Evaluation of Work-related Psychosocial and Ergonomics Factors in Relation to Low Back Discomfort in Emergency Unit Nurses

PubMed Central

Habibi, Ehsanollah; Pourabdian, Siamak; Atabaki, Azadeh Kianpour; Hoseini, Mohsen

2012-01-01

Background and Aim: High prevalence of low back pain is one of the most common problems among nurses. The aim of this study was to evaluate the relation of the intensity of low back discomfort to two low back pain contributor factors (Ergonomics risk factors and psychosocial factors). Methods: This cross-sectional survey was conducted on 120 emergency unit nurses in Esfahan. Job content, ergonomics hazards and nordic questionnaire were used in that order for daily assessment of Psychosocial and Ergonomics factors and the intensity of low back discomfort. Nurses were questioned during a 5-week period, at the end of each shift work. The final results were analyzed with SPSS software18/PASW by using Spearman, Mann-Whitney and Kolmogorov-Smirnove test. Results: There was a significant relationship between work demand, job content, social support and intensity of low back discomfort (P value <0.05). But, there was not any link between intensity of low back discomfort and job control. Also, there was significant relationship between intensity of low back discomfort and ergonomics risk factors. Conclusion: This study showed an indirect relationship between the intensity of low back discomfort and social support. This study also confirmed a direct relationship between the intensity of low back discomfort and work demand, job content, ergonomics factors (Awkward Postures (rotating and bending), manual patient handling and repetitiveness, standing continuously more than 30 min). So, to decrease work related low back discomfort, psychosocial factors should be attended in addition to ergonomics factors. PMID:22973487

Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

NASA Astrophysics Data System (ADS)

Hashim, Yusof bin; Taha, Zahari bin

2015-02-01

Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger's injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hashim, Yusof bin; Taha, Zahari bin

Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. Themore » research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.« less

An ergonomic study on the biomechanical consequences in children, generated by the use of computers at school.

PubMed

Paraizo, Claudia; de Moraes, Anamaria

2012-01-01

This research deals with the influence of the computer use in schools related to the children posture, in an ergonomic point of view. The research tries to identify probable causes for the children early postural constraints, relating it to the sedentary behavior and the lack of an ergonomic project in schools. The survey involved 186 children, between 8 and 12 years old, students of a private school in Rio de Janeiro-Brasil. An historical and theoretical school furniture research was conducted as well as a survey with the students and teachers, computer postural evaluation, ergonomic evaluation (RULA method), and observations in the computer classroom. The research dealt with the student's perception with respect to the furniture utilized by him in the classroom during the use of the computer, his body complaint, the time he spent working on the school computer and the possibility of the existence of sedentariness. Also deals with the teachers' perception and knowledge regarding ergonomics with reference to schoolroom furniture and its Regulatory Norms (RN). The purpose of the research work is to highlight the importance of this knowledge, having in view the possibility of the teachers' collaboration in the ergonomic adaptation of the classroom environment and in their conscientious opinion during the purchasing of this furniture. A questionnaire was utilized and its results showed some discontent on the part of the teachers with relation to the schoolroom furniture as well as the teachers' scant knowledge of Ergonomics.We conclude with a survey that despite the children had constraints in postural assessments and school furniture needs a major ergonomic action, the time that children use the computer at school is small compared with the time of use at home and therefore insufficient to be the main cause of quantified commitments, thus the study of computer use at home as a development and continuity of this research.

Visual ergonomic aspects of glare on computer displays: glossy screens and angular dependence

NASA Astrophysics Data System (ADS)

Brunnström, Kjell; Andrén, Börje; Konstantinides, Zacharias; Nordström, Lukas

2007-02-01

Recently flat panel computer displays and notebook computer are designed with a so called glare panel i.e. highly glossy screens, have emerged on the market. The shiny look of the display appeals to the costumers, also there are arguments that the contrast, colour saturation etc improves by using a glare panel. LCD displays suffer often from angular dependent picture quality. This has been even more pronounced by the introduction of Prism Light Guide plates into displays for notebook computers. The TCO label is the leading labelling system for computer displays. Currently about 50% of all computer displays on the market are certified according to the TCO requirements. The requirements are periodically updated to keep up with the technical development and the latest research in e.g. visual ergonomics. The gloss level of the screen and the angular dependence has recently been investigated by conducting user studies. A study of the effect of highly glossy screens compared to matt screens has been performed. The results show a slight advantage for the glossy screen when no disturbing reflexes are present, however the difference was not statistically significant. When disturbing reflexes are present the advantage is changed into a larger disadvantage and this difference is statistically significant. Another study of angular dependence has also been performed. The results indicates a linear relationship between the picture quality and the centre luminance of the screen.

Methodological framework for the ergonomic design of children's playground equipment: a Serbian experience.

PubMed

Grozdanovic, Miroljub; Jekic, Savko; Stojiljkovic, Evica

2014-01-01

Adequate application of the static and dynamic anthropometric measures of pre-school children in ergonometric design of children's playground equipment should eliminate all dangers and difficulties in their use. Possibilities of injuries, insecure movements, discomfort able positions and some other dangerous actions may be minimized; and safety and health protection of pre-school children will be increased. Children's playground represents a significant space of activity for pre-school children. Therefore, it is necessary to apply ergonomic principles which contribute to the adjustment of the playground elements to children's anatomic features. Based on the results presented in this paper, new constructions were designed and new playgrounds were installed in Serbia. Participants were children from three pre-school age groups: Junior age group (3-4 years of age, 17 children), Medium age group (4-5 years of age, 22 children), and Senior age group (5-6 years of age, 26 children). Thirty-one static anthropometric measures (12 in standing position, 11 in sitting position, 7 related to dimensions of hand, foot an head, with body weight and shoe size) and 15 dynamic anthropometric measures (7 in standing position, 6 in sitting position and 2 dimension of foot and hand) were defined for the study. Measurements were taken using an anthrop-meter, a flexible measuring tape. Equations for ergonomic design of children's playground elements were also defined. Basic statistical data of static and dynamic anthropometric measurements of the pre-school children are presented in this paper, as well as the statistical calculation of the corrective anthropometric measurements. Measurements were performed in "Poletarac" kindergarten, part of the pre-school institution "Radost" in Cacak. Elements of playground equipment in "Bambi" kindergarten in Kragujevac (the Indian tent "wigwam", gate-house, swing and carousel) were designed and built using these parameters. Based on the obtained results, several playgrounds were designed, manufactured and equipped with the appropriate items.

Organizational ergonomics of occupational health methods and processes in a Brazilian oil refinery.

PubMed

Bau, Lucy M S; Farias, Jean P; Buso, Sandro A; Passero, Carolina R Marcon

2012-01-01

Organizational ergonomics refers to the optimization of social technical systems, including their organizational structures, policies and processes. The relevant topics include communications, management of resources, work projects, temporal organization of work, team work, participative project, new work paradigms, cooperative work, organizational culture, network organizations and quality management (IEA, 2000). The purpose of this study was the reorganization of the methods and processes of the occupational health sector (SMS/SO - Portuguese acronym of the area) of a petrochemical company. The work involved thirty professionals: a coordinator, two occupational physicians, one cardiologist, one occupational dentist, two occupational nurses, eleven occupational health technicians, one social worker, one nutritionist, one phonoaudiologist, one ophthalmologist, one biochemist, two ergonomists, three administrative assistants, one administrator and one psychologist, during a six-month period. The methodology that was used sought to establish a cooperative alliance focused on change, transformation and acquisition of skills, reflecting directly on the attitudes and performance of the leaderships and their work teams. In addition to the feedback practice, the following supporting tools were used for the study's success: "Functional Polyvalence Matrix", "Management of Failures", 5W2H", "6M", "5 Why" and "process mapping". The intended results after the organization ergonomics restructuring process will allow the leader to help his or her team to make a diagnosis of the problems, identify options, develop strategies, establish targets and action plans, remove barriers, review contexts and implement the business management fundaments: planning, organization, management, coordination and control. The transformation possibilities allow us to consider some hypothesis: Before: Focus only on results. After: Engage collaborators to create sustainable results. Before: Operating profile. After: Tactical/strategic profile. Before: Find errors. After: Value effort and development. Before: Listen to what is being said. After: Understand what is being said. Before: Create fears of the consequences. After: Create room for risk. Before: Be the one who approves and decides. After: Be the cooperative support.

Precision-Guided Munitions Effects Representation

DTIC Science & Technology

2017-01-03

Center for Army Analysis (CAA) by the TRADOC Analysis Center, Monterey (TRAC-MTRY). The focus of the research is to improve the current methodology ... Methodology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Timeline... Methodology . . . . . . . . . . . . . . . . . . . . C-1 MATLAB Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-49 Damage

Latent human error analysis and efficient improvement strategies by fuzzy TOPSIS in aviation maintenance tasks.

PubMed

Chiu, Ming-Chuan; Hsieh, Min-Chih

2016-05-01

The purposes of this study were to develop a latent human error analysis process, to explore the factors of latent human error in aviation maintenance tasks, and to provide an efficient improvement strategy for addressing those errors. First, we used HFACS and RCA to define the error factors related to aviation maintenance tasks. Fuzzy TOPSIS with four criteria was applied to evaluate the error factors. Results show that 1) adverse physiological states, 2) physical/mental limitations, and 3) coordination, communication, and planning are the factors related to airline maintenance tasks that could be addressed easily and efficiently. This research establishes a new analytic process for investigating latent human error and provides a strategy for analyzing human error using fuzzy TOPSIS. Our analysis process complements shortages in existing methodologies by incorporating improvement efficiency, and it enhances the depth and broadness of human error analysis methodology. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Simulation Of Assembly Processes With Technical Of Virtual Reality

NASA Astrophysics Data System (ADS)

García García, Manuel; Arenas Reina, José Manuel; Lite, Alberto Sánchez; Sebastián Pérez, Miguel Ángel

2009-11-01

Virtual reality techniques use at industrial processes provides a real approach to product life cycle. For components manual assembly, the use of virtual surroundings facilitates a simultaneous engineering in which variables such as human factors and productivity take a real act. On the other hand, in the actual phase of industrial competition it is required a rapid adjustment to client needs and to market situation. In this work it is analyzed the assembly of the front components of a vehicle using virtual reality tools and following up a product-process design methodology which includes every life service stage. This study is based on workstations design, taking into account productive and human factors from the ergonomic point of view implementing a postural study of every assembly operation, leaving the rest of stages for a later study. Design is optimized applying this methodology together with the use of virtual reality tools. It is also achieved a 15% reduction on time assembly and of 90% reduction in muscle—skeletal diseases at every assembly operation.

The telerobot workstation testbed for the shuttle aft flight deck: A project plan for integrating human factors into system design

NASA Technical Reports Server (NTRS)

Sauerwein, Timothy

1989-01-01

The human factors design process in developing a shuttle orbiter aft flight deck workstation testbed is described. In developing an operator workstation to control various laboratory telerobots, strong elements of human factors engineering and ergonomics are integrated into the design process. The integration of human factors is performed by incorporating user feedback at key stages in the project life-cycle. An operator centered design approach helps insure the system users are working with the system designer in the design and operation of the system. The design methodology is presented along with the results of the design and the solutions regarding human factors design principles.

The Effect of Pain on Task Performance: A Review of the Literature.

DTIC Science & Technology

1992-07-01

Pharmacology. 11 (2), 123-127 (1989) 8. J. D. Benson, Application of manual handling task in the control of low back pain. In Trends in Ergonomics /Human...Factors IV. Proceedings of the Annual International Industrial Ergonomics and Safety Conference. Amsterdam: Elsevier Science Publishers (1987). 9. T...development of a motor performance method for the measurement of pain. Ergonomics . 32 (3), 307-316 (1989) 67. K. Sedlak, Low-back pain perception and

Mandibular Advancing Positive Pressure Apnea Remediation Device (MAPPARD)

DTIC Science & Technology

2014-06-01

inlet valve that will accept a 90-degree swivel and is tapered in the area where the lips intersect for better comfort . Further ergonomic testing will...production also informed the size of the necessary mouthpiece and the requirement for a design for a more ergonomic airway mouthpiece and tube connection...fit and ergonomics (see Figures. 32 and 33). The subsequent initial test showed that the model was comfortable and without aid of continuous air

A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry

NASA Astrophysics Data System (ADS)

Srinivasa Rao, P.; Niraj, Malay

2016-09-01

Lean manufacturing is a business strategy developed in Japan. In the present scenario, the global market is developing new techniques for getting more and more production rate with a good quality under low cost. In this context, human factors have to be given importance to their working conditions. The study demonstrates the adoption of ergonomic conditions in lean manufacturing for the improvement of organizational performance of the industry. The aim of ergonomics is to adapt the new techniques to their work in efficient and safe ways in order to optimize the human health conditions and increasing the production rate. By conducting survey on various disciplines and showed how the production rate and human ergonomic conditions is affected.

Complexity, signal detection, and the application of ergonomics: reflections on a healthcare case study.

PubMed

Dekker, Sidney

2012-05-01

Complexity is a defining characteristic of healthcare, and ergonomic interventions in clinical practice need to take into account aspects vital for the success or failure of new technology. The introduction of new monitoring technology, for example, creates many ripple effects through clinical relationships and agents' cross-adaptations. This paper uses the signal detection paradigm to account for a case in which multiple clinical decision makers, across power hierarchies and gender gaps, manipulate each others' sensitivities to evidence and decision criteria. These are possible to analyze and predict with an applied ergonomics that is sensitive to the social complexities of the workplace, including power, gender, hierarchy and fuzzy system boundaries. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

What happened after the evaluation?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L

1999-03-12

An ergonomics program including a ergonomic computer workstation evaluations at a research and development facility was assessed three years after formal implementation. As part of the assessment, 53 employees who had been subjects of computer workstation evaluations were interviewed. The documented reports (ergonomic evaluation forms) of the ergonomic evaluations were used in the process of selecting the interview subjects. The evaluation forms also provided information about the aspects of the computer workstation that were discussed and recommended as part of the evaluation, although the amount of detail and completeness of the forms varied. Although the results were mixed and reflectivemore » of the multivariate psychosocial factors affecting employees working in a large organization, the findings led to recommendations for improvements of the program.« less

Assessment of health risks of policies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ádám, Balázs, E-mail: badam@cmss.sdu.dk; Department of Preventive Medicine, Faculty of Public Health, University of Debrecen, P.O. Box 9, H-4012 Debrecen; Molnár, Ágnes, E-mail: MolnarAg@smh.ca

The assessment of health risks of policies is an inevitable, although challenging prerequisite for the inclusion of health considerations in political decision making. The aim of our project was to develop a so far missing methodological guide for the assessment of the complex impact structure of policies. The guide was developed in a consensual way based on experiences gathered during the assessment of specific national policies selected by the partners of an EU project. Methodological considerations were discussed and summarized in workshops and pilot tested on the EU Health Strategy for finalization. The combined tool, which includes a textual guidancemore » and a checklist, follows the top-down approach, that is, it guides the analysis of causal chains from the policy through related health determinants and risk factors to health outcomes. The tool discusses the most important practical issues of assessment by impact level. It emphasises the transparent identification and prioritisation of factors, the consideration of the feasibility of exposure and outcome assessment with special focus on quantification. The developed guide provides useful methodological instructions for the comprehensive assessment of health risks of policies that can be effectively used in the health impact assessment of policy proposals. - Highlights: • Methodological guide for the assessment of health risks of policies is introduced. • The tool is developed based on the experiences from several case studies. • The combined tool consists of a textual guidance and a checklist. • The top-down approach is followed through the levels of the full impact chain. • The guide provides assistance for the health impact assessment of policy proposals.« less

Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

PubMed

Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

2012-01-01

To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

Ergonomics in dentistry: experiences of the practice by dental students.

PubMed

Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

2017-08-01

The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The relationship between knowledge of ergonomic science and the occupational health among nursing staff affiliated to Golestan University of Medical Sciences

PubMed Central

Juibari, Leila; Sanagu, Akram; Farrokhi, Nafiseh

2010-01-01

BACKGROUND: Occupational hazards are much higher for nurses than many other jobs and neglecting this fact may reduce the quality of nursing services. The aim of this study was to investigate the relationship between knowledge of ergonomics and occupational health among the nursing staff affiliated to Golestan University of Medical Sciences. METHODS: It was a cross-sectional analytical study on 423 nursing staff working in various medical centers affiliated to Golestan University of Medical Sciences in 2008, selected by quota randomized sampling. Data collection instrument was Ergonomics Questionnaire, which consisted of 72 questions. Cronbach’s alpha for main sections of the questionnaire was 0.8, 0.8 and 0.9. Descriptive and analytical tests were used for data analysis and an alpha error of 5% was considered. RESULTS: Of all the subjects, 36.1% had 5-10 years of work experience, 61.9% had a good knowledge of ergonomic principles, and 83% were exposed to a mild level of occupational hazards. There was no significant relationship between knowledge of ergonomics and occupational health (p = 0.08). The relationships between knowledge of ergonomics and age, gender, marital status, work experience, the type, and the location of service were significant (p < 0.05). The relationship between occupational health and age, work experience, employment type, and location of service were also statistically significant (p < 0.05). CONCLUSIONS: Training staff to do their job in the best way, taking breaks between long working hours, using appropriate tools and facilities and paying attention to ergonomics can provide a healthier work environment for nurses and optimize human resource efficiency. PMID:21589793

Comparative assessment of surgeons' task performance and surgical ergonomics associated with conventional and modified flank positions: a simulation study.

PubMed

Fan, Yu; Kong, Gaiqing; Meng, Yisen; Tan, Shutao; Wei, Kunlin; Zhang, Qian; Jin, Jie

2014-11-01

Flank position is extensively used in retroperitoneoscopic urological practice. Most surgeons follow the patients' position in open approaches. However, surgical ergonomics of the conventional position in the retroperitoneoscopic surgery is poor. We introduce a modified position and evaluated task performance and surgical ergonomics of both positions with simulated surgical tasks. Twenty-one novice surgeons were recruited to perform four tasks: bead transfer, ring transfer, continuous suturing, and cutting a circle. The conventional position was simulated by setting an endo-surgical simulator parallel to the long axis of a surgical desk. The modified position was simulated by rotating the simulator 30° with respect to the long axis of the desk. The outcome measurements include task performance measures, kinematic measures for body alignment, surface electromyography, relative loading between feet, and subjective ratings of fatigue. We observed significant improvements in both task performance and surgical ergonomics parameters under the modified position. For all four tasks, subjects finished tasks faster with higher accuracy (p < 0.005 or < 0.001). For ergonomics part: (1) The angle between the upper body and the head was decreased by 7.4 ± 1.7°; (2) The EMG amplitude collected from shoulders and left lumber was significantly lower (p < 0.05); (3) Relative loading between feet was more balanced (p < 0.001); (4) Manual-action muscles and postural muscles are rated less fatiguing according to the questionnaire (p < 0.05). Conventional position of patient in retroperitoneoscopic upper urinary tract surgery is associated with poor surgical ergonomics. With a simulated surgery, we demonstrated that our modified position could significantly improve task performance and surgical ergonomics. Further studies are still warranted to validate these benefits for both patients and surgeons.

Ergonomic Microscope: Need of the Hour

PubMed Central

Mhaske, Shubhangi Ashok; Ahmad, Malik Ajaz; Yuwanati, Monal B.; Prabhu, Shweta; Pardhe, Nilesh

2015-01-01

Background Prolonged use of conventional microscope develops musculo-skeletal injuries like chronic pain syndrome, including shoulder, neck, back aches & fatigue. Since the problems go unnoticed, the injuries can lead to some serious permanent damages. This further leads to a compromise in the health and welfare of the person and the institute. Hence, an understanding about the ergonomics is the need of the hour in this postmodern era. Inspite of few studies and surveys about ergonomics, there is still a steep rise in the musculoskeletal disorders. Aim of the Study The aim of our study was to gauge the general awareness of pathologists, microbiologists and oral pathologists towards ergonomics in their profession. Materials and Methods A cross-sectional survey based study was de­signed, which included a questionnaire. The questionnaire included multiple choice questions with four alternatives. Professionals (pathologists, microbiologists and oral pathologists) were included in the survey. Teaching faculty (Professors, Associate Professors and Lecturers) and Post graduate students formed the study group. Results and Observations The response to the questionnaire was 100%. Less than 50% of oral pathologists were aware of the importance of ergonomics in their profession. The most common site affected was neck and back. One of the drastic observations was that, Oral Pathologists suffered from a combination of problems affecting neck, back, eyes, headache, shoulders, arms and wrists. Conclusion Increase in our understanding regarding ergonomic­ally designed microscopes can increase our efficiency and in turn improve our general well-being. With improvements in ergonomics, professionals would be able to modify and optimize their working conditions. Certain guidelines need to be followed by the profes­sionals to reduce chances of musculoskeletal disorders. PMID:26155565

Identification of ergonomics interventions used to reduce musculoskeletal loading for building installation tasks.

PubMed

Albers, Jim; Estill, Cherie; MacDonald, Leslie

2005-07-01

Skilled workers in the mechanical and electrical installation (M/EI) building and construction trades experience high rates of disabling work-related musculoskeletal disorders (WMSDs). The M/EI trades involve installing piping; heating, ventilation and air conditioning (HVAC), and electrical systems in residential, commercial, and industrial buildings. In the absence of an ergonomics standard in the United States, some building and construction contractors, including M/EI sector contractors, have implemented various ergonomics interventions on their worksites on a voluntary basis. However, no data were available to determine the type of voluntary control measures being implemented, the task-specific hazards for which control measures needed to be developed or refined, and perceived barriers to improving hazard control. As part of a larger effort to obtain this data, the National Institute for Occupational Safety and Health (NIOSH) organized a stakeholder meeting to gather information regarding ergonomics interventions or "best practices" by M/EI contractors and tradespeople. The attendees included 39 industry representatives, 17 construction ergonomics researchers from government and academia, and four ergonomics consultants with experience in the construction industry. Participants spent more than 50% of time meeting in small trade-specific breakout sessions. According to the participants, tasks common to the three trades included (1) drill holes and shoot fasteners; (2) place and install systems, and (3) lift and carry materials and equipment. Engineering interventions described in the stakeholder meeting included tools, equipment, and engineered building materials; administrative controls largely consisted of training and education programs and modifications of work and management practice. Most participants believed that there were significant limits to the impact individual contractors and tradespeople could have in leading ergonomics improvement in the building and construction industry.

Users/consumers differences regarding ergonomics and design theory and practice.

PubMed

Dejean, Pierre-Henri; Wagstaff, Peter

2012-01-01

This paper presents the concept of direct and indirect users, a key issue to cooperation between ergonomists, designers and managers involved in a sustainable approach to design. What issues for Ergonomics and Design are launched by this concept? User/consumer differences should be approached taking into account Ergonomics and Design theory and practice. What dialogue and tools could help the ergonomist/designer/manager to respond to all the requirements of the future clients of the product?

Ergonomics in the office environment

NASA Technical Reports Server (NTRS)

Courtney, Theodore K.

1993-01-01

Perhaps the four most popular 'ergonomic' office culprits are: (1) the computer or visual display terminal (VDT); (2) the office chair; (3) the workstation; and (4) other automated equipment such as the facsimile machine, photocopier, etc. Among the ergonomics issues in the office environment are visual fatigue, musculoskeletal disorders, and radiation/electromagnetic (VLF,ELF) field exposure from VDT's. We address each of these in turn and then review some regulatory considerations regarding such stressors in the office and general industrial environment.

Integration of time as a factor in ergonomic simulation.

PubMed

Walther, Mario; Muñoz, Begoña Toledo

2012-01-01

The paper describes the application of a simulation based ergonomic evaluation. Within a pilot project, the algorithms of the screening method of the European Assembly Worksheet were transferred into an existing digital human model. Movement data was recorded with an especially developed hybrid Motion Capturing system. A prototype of the system was built and is currently being tested at the Volkswagen Group. First results showed the feasibility of the simulation based ergonomic evaluation with Motion Capturing.

Evidence-based ergonomics: a model and conceptual structure proposal.

PubMed

Silveira, Dierci Marcio

2012-01-01

In Human Factors and Ergonomics Science (HFES), it is difficult to identify what is the best approach to tackle the workplace and systems design problems which needs to be solved, and it has been also advocated as transdisciplinary and multidisciplinary the issue of "How to solve the human factors and ergonomics problems that are identified?". The proposition on this study is to combine the theoretical approach for Sustainability Science, the Taxonomy of the Human Factors and Ergonomics (HFE) discipline and the framework for Evidence-Based Medicine in an attempt to be applied in Human Factors and Ergonomics. Applications of ontologies are known in the field of medical research and computer science. By scrutinizing the key requirements for the HFES structuring of knowledge, it was designed a reference model, First, it was identified the important requirements for HFES Concept structuring, as regarded by Meister. Second, it was developed an evidence-based ergonomics framework as a reference model composed of six levels based on these requirements. Third, it was devised a mapping tool using linguistic resources to translate human work, systems environment and the complexities inherent to their hierarchical relationships to support future development at Level 2 of the reference model and for meeting the two major challenges for HFES, namely, identifying what problems should be addressed in HFE as an Autonomous Science itself and proposing solutions by integrating concepts and methods applied in HFES for those problems.

A Scott bench with ergonomic thorax stabilisation pad improves body posture during preacher arm curl exercise.

PubMed

Biscarini, Andrea; Benvenuti, Paolo; Busti, Daniele; Zanuso, Silvano

2016-05-01

We assessed whether the use of an ergonomic thorax stabilisation pad, during the preacher arm curl exercise, could significantly reduce the excessive shoulder protraction and thoracic kyphosis induced by the standard flat pad built into the existing preacher arm curl equipment. A 3D motion capture system and inclinometers were used to measure shoulder protraction and thoracic kyphosis in 15 subjects performing preacher arm curl with a plate-loaded machine provided with the standard flat pad. The same measures were repeated after replacing the flat pad with a new ergonomic pad, specifically designed to accommodate the thorax profile and improve body posture. Pad replacement significantly (p < 0.001) reduced shoulder protraction (from [Formula: see text] to [Formula: see text]) and thoracic kyphosis (from [Formula: see text] to [Formula: see text]), enabling postural and functional improvements within the entire spine, shoulder girdle and rib cage. The ergonomic pad may potentially allow a more effective training, prevent musculoskeletal discomfort and reduce the risk of injury. Practitioner summary: We have designed an ergonomic thorax stabilisation pad for the preacher arm curl exercise. The new ergonomic pad improves the poor posture conditions induced by the standard flat pad and may potentially allow a more effective training, prevent musculoskeletal discomfort, improve the breathing function and reduce the risk of injury.

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators.

PubMed

Graetz, Christian; Plaumann, Anna; Rauschenbach, Sebastian; Bielfeldt, Jule; Dörfer, Christof E; Schwendicke, Falk

2016-07-01

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning. In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire. Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments. Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments. The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.

Insights into Ergonomics Among Dental Professionals of a Dental Institute and Private Practitioners in Hubli–Dharwad Twin Cities, India

PubMed Central

Kalghatgi, Shrivardhan; Prasad, Kakarla Veera Venkata; Chhabra, Kumar Gaurav; Deolia, Shravani; Chhabra, Chaya

2014-01-01

Background To assess the knowledge, attitude, and practice of ergonomics among dental professionals of Hubli–Dharwad twin cities, India. Methods Investigator-developed, self-administered, closed-ended questionnaire assessing knowledge, attitude, and practices regarding ergonomics during dental practice was filled in by undergraduates, house surgeons, postgraduates, and faculty members of dental institutions and private practitioners from Hubli–Dharwad twin cities. Results Data were collected from a total of 250 participants, 50 belonging to each academic group. Overall mean knowledge, attitude, and practice scores were 52%, 75%, and 55%, respectively. Significant correlation was found for age with attitude (χ2 = 10.734, p = 0.030) and behavior (χ2 = 12.984, p = 0.011). Marital status was significantly associated with all the three domains; knowledge (χ2 = 29.369, p = 0.000), attitude (χ2 = 29.023, p = 0.000), and practices (χ2 = 13.648, p = 0.009). Conclusion Participants had considerable awareness and behavior toward ergonomics in dental practice. The high attitude score indicates stronger acceptance of ergonomics principles and guidelines during routine dental procedures. The current study highlights the situation of ergonomics in dental practice in the form of knowledge, attitude, and practices. PMID:25516809

A field intervention examining the impact of an office ergonomics training and a highly adjustable chair on visual symptoms in a public sector organization.

PubMed

Amick, Benjamin C; Menéndez, Cammie Chaumont; Bazzani, Lianna; Robertson, Michelle; DeRango, Kelly; Rooney, Ted; Moore, Anne

2012-05-01

Examine the effect of a multi-component office ergonomics intervention on visual symptom reductions. Office workers were assigned to either a group receiving a highly adjustable chair with office ergonomics training (CWT), a training-only group (TO) or a control group (C). A work environment and health questionnaire was administered 2 and 1 month(s) pre-intervention and 3, 6, and 12 months post-intervention. Multi-level statistical models tested hypotheses. The CWT intervention lowered daily visual symptoms (p < 0.01) post-intervention. The TO group did not significantly differ from the control group. The CWT group differed significantly from the TO group (p = 0.01) post-intervention. Workers who received a highly adjustable chair and office ergonomics training had reduced visual symptoms and the effect was maintained through twelve months post-intervention. The lack of a training-only group effect supports implementing training in conjunction with the highly adjustable chair to reduce visual symptoms. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The implementation of ergonomics advice and the stage of change approach.

PubMed

Rothmore, Paul; Aylward, Paul; Karnon, Jonathan

2015-11-01

This paper investigates the implementation of injury prevention advice tailored according to the Stage of Change (SOC) approach. The managers of 25 workgroups, drawn from medium to large companies across a wide range of occupational sectors were allocated to receive either standard ergonomics advice or ergonomics advice tailored according to the workgroup SOC. Twelve months after the advice was provided, semi-structured interviews were conducted with each manager. In a multivariate model, managers who had received tailored advice were found to have implemented significantly more of the recommended changes (IRR = 1.68, 95% CI 1.07-2.63) and more "additional" changes (IRR = 1.90, 95% CI 1.12-3.20). Qualitative analysis identified that the key barriers and facilitators to the implementation of changes were largely related to worker resistance to change and the attitudes of senior managers towards health and safety. The findings from this study suggest that the implementation of ergonomics recommendations may be improved by the tailoring of advice according to SOC principles. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The explanatory power of Schema Theory: theoretical foundations and future applications in Ergonomics.

PubMed

Plant, Katherine L; Stanton, Neville A

2013-01-01

Schema Theory is intuitively appealing although it has not always received positive press; critics of the approach argue that the concept is too ambiguous and vague and there are inherent difficulties associated with measuring schemata. As such, the term schema can be met with scepticism and wariness. The purpose of this paper is to address the criticisms that have been levelled at Schema Theory by demonstrating how Schema Theory has been utilised in Ergonomics research, particularly in the key areas of situation awareness, naturalistic decision making and error. The future of Schema Theory is also discussed in light of its potential roles as a unifying theory in Ergonomics and in contributing to our understanding of distributed cognition. We conclude that Schema Theory has made a positive contribution to Ergonomics and with continued refinement of methods to infer and represent schemata it is likely that this trend will continue. This paper reviews the contribution that Schema Theory has made to Ergonomics research. The criticisms of the theory are addressed using examples from the areas of situation awareness, decision making and error.

Evaluation of three ergonomic measures on productivity, physical work demands, and workload in gypsum bricklayers.

PubMed

van der Molen, Henk F; Kuijer, P Paul F M; Formanoy, Margriet; Bron, Lennart; Hoozemans, Marco J M; Visser, Bart; Frings-Dresen, Monique H W

2010-06-01

This study evaluated the effects of a combination of three ergonomic measures designed to reduce the risk of low back complaints among gypsum bricklayers. The measures focused on optimizing working height and reducing carrying distances. A within-subjects (N = 10) controlled field study was used to compare the effects of working with the ergonomic measures with those of working with conventional working methods at the worksite during the course of a full working day. Productivity, work demands, and workload were assessed. No effects were found on productivity, total work time, duration of tasks, duration of carrying, or energetic or biomechanical workload. However, the duration and frequency of working between knee and hip height during a working day increased by 25% and 15%, respectively, due to the ergonomic measures. During the finishing task, the duration and frequency of working below knee level decreased significantly by 4 min and 71 times, respectively. The limited impact of the ergonomic measures argues for additional measures to reduce the risk of low back complaints. 2010 Wiley-Liss, Inc.

[Ergonomics and productivity: an example applied to a manufacturing industry].

PubMed

Battevi, Natale; Vitelli, Nora

2013-01-01

The survival of manufacturing in the western world also depends on the ability to increase productivity. To achieve this goal, it is necessary to recover the efficiency of all workers suffering from upper limb biomechanical overload disease. Ergonomic methods can be a valuable tool in solving this apparent conflict: operatives'productivity and health. After carrying out an ergonomic education and training programme for all company employees and risk assessment for upper limb biomechanical overload through the OCRA checklist method, a programme of improvements on a production line was planned and tested, mainly based on international and European standards. Within approximately 2 years, thanks to changes in workplace layout and organization, a significant reduction of 22.7% in risk level was achieved and, at the same time, a 16% increase in productivity. An ergonomic approach based on global, interdisciplinary and participatory principles in the case considered showed that it is possible to match increased productivity with decreased risk. In this specific case application of ergonomic principles during product design was rather poor, which is typical of companies working for third party customers.

Sustainable Ergonomic Program - Basic Condition for Implementation of Corporate Social Responsibility

NASA Astrophysics Data System (ADS)

Marková, Petra; Beňo, Rastislav; Hatiar, Karol

2012-12-01

Gradually increasing pressure on companies to start to behave socially responsible is a response to social, environmental and economic requirements. The society faces a period of changes that have occurred since the beginning of the crisis and revealing weaknesses in the economy. We become witnesses of rapid changes and challenges posed by globalization, lack of resources, demographic structure and innovation. Objective necessity becomes a corporate social responsibility (CSR) already at the companies’ level, which is supported by the approach of the EU institutions and the Slovak Republic. One of the possible appliance through which we can contribute to the sustainability of CSR are sustainable ergonomic programs. When we want to talk about sustainable ergonomic program is important to focus on three key areas. The first area is the Impact of technic and technology to employees at work, the second area is the Importance and impact of socially responsible HR in ergonomics and last area is the Creation of the work environment in relation to environmental sustainability. Ergonomic programs sustainability requires to apply appropriate methods for evaluation of their cost benefit and health effect.

The proactive approach--is it worthwhile? A prospective controlled ergonomic intervention study in office workers.

PubMed

Laestadius, Jasminka Goldoni; Ye, Jian; Cai, Xiaodong; Ross, Sandra; Dimberg, Lennart; Klekner, Meg

2009-10-01

Does proactive ergonomics program enhance office worker health and productivity? The investigation was conducted in connection with the move of 1500 office staff to a building with improved ergonomics. It was focused on associations between workstation features, working postures, musculoskeletal pain symptoms, and eye strain before and 18 months after implementation of a proactive ergonomic program. The outcomes were compared between the intervention and a similar reference group. Associations between improvement of postures and less musculoskeletal pain and eye strain were confirmed. A cross association between several features and postures and improved symptoms was noted, along with improved productivity. The study suggests that a proactive program adhering to the OSHA recommendations needs to include an individual workstation assessment to be effective in reducing symptoms and increasing productivity.

Ergonomics in industrially developing countries: a literature review.

PubMed

Huck-Soo, Loo; Richardson, Stanley

2012-12-01

The two final decades of the 20th century saw a significant increase in ergonomics activity (and resulting publications) in industrially developing countries (IDCs). However, a few ergonomics papers from Singapore, for example, were published in 1969 and 1970. This paper reviews developments in ergonomics in industrially developing countries from 1969 relying heavily on published papers although their quality varies considerably. Some criticism of these papers is offered. Most were concerned with the use of work tools, workstation operations, material handling and working environments especially in tropical climates. The similar problems encountered in a variety of countries are discussed, and the importance of low-cost solutions stressed. This study presents an overview of er gonomics research in IDCs. It concentrates on ASEAN countries whilst recognising the valuable work done in other areas.

Towards a sustainable world through human factors and ergonomics: it is all about values.

PubMed

Lange-Morales, Karen; Thatcher, Andrew; García-Acosta, Gabriel

2014-01-01

In this paper, we analyse two approaches that attempt to address how a human factors and ergonomics (HFE) perspective can contribute to the sustainability of the human race. We outline the principles, purposes and fields of application of ergoecology and green ergonomics, and thereafter deal with their context of emergence, and the overlaps in purpose, and principles. Shared values are deduced and related to socio-technical principles for systems' design. Social responsibility and environmental/ecospheric responsibility are the leading threads of ergoecology and green ergonomics, giving rise to the values of: respect for human rights, respect for the Earth, respect for ethical decision-making, appreciation of complexity, respect for transparency and openness, and respect for diversity. We discuss the consequences of considering these values in HFE theory and practice.

[Ergonomic movement in dentistry].

PubMed

Bos-Huizer, J J A; Bolderman, F W

2014-02-01

'Ergonomic movement in dentistry' is a recently developed ergonomic programme for dental healthcare professionals which is intended to prevent work-related complaints and assist in recovering from them. The programme is recommended by disability insurers in cases of specific physical complaints, limitations or disability, as a consequence of which a dental healthcare professional is unable to carry out his or her work. In a four-day training programme, in one's own workplace, skills are taught in the areas of work organization, work attitude and movement. These skills are directly applied in the treatment ofpatients and, if necessary, further improved. In this way, one advances step by step to an ergonomic way of working. Evaluations have shown that the programme is advantageous for the attitude toward work, the workplace and the work organization as well as the reduction of disability.

Critical Viewing: Stimulant to Critical Thinking. Teacher's Guide.

ERIC Educational Resources Information Center

O'Reilly, Kevin; Splaine, John

The purpose of this guide is to implement the teaching of "Critical Viewing: Stimulant to Critical Thinking," a guide for students. Part one of the guide is an overview of the organization, methodologies, and evaluation procedures used in "Critical Viewing." Suggestions and activities for teaching the six chapters in "Critical Viewing" are given…

Using subject-specific three-dimensional (3D) anthropometry data in digital human modelling: case study in hand motion simulation.

PubMed

Tsao, Liuxing; Ma, Liang

2016-11-01

Digital human modelling enables ergonomists and designers to consider ergonomic concerns and design alternatives in a timely and cost-efficient manner in the early stages of design. However, the reliability of the simulation could be limited due to the percentile-based approach used in constructing the digital human model. To enhance the accuracy of the size and shape of the models, we proposed a framework to generate digital human models using three-dimensional (3D) anthropometric data. The 3D scan data from specific subjects' hands were segmented based on the estimated centres of rotation. The segments were then driven in forward kinematics to perform several functional postures. The constructed hand models were then verified, thereby validating the feasibility of the framework. The proposed framework helps generate accurate subject-specific digital human models, which can be utilised to guide product design and workspace arrangement. Practitioner Summary: Subject-specific digital human models can be constructed under the proposed framework based on three-dimensional (3D) anthropometry. This approach enables more reliable digital human simulation to guide product design and workspace arrangement.

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases productivity, and decreases the number and severity of work-related musculoskeletal disorders (MSDs). MSDs affect the muscles, nerves, and tendons, and are a leading cause of lost workdays due to injury or illness.

Scanning through the pain: ergonomic considerations for performing echocardiography of animals.

PubMed

Macdonald, Kristin; Scott, Patrick

2013-03-01

Work-related musculoskeletal disorders (MSD) are a common problem among sonographers, with prevalence in human sonographers of 80-90%. However, this problem appears to be largely neglected in the veterinary literature. Awareness of MSDs, ergonomic redesign, workplace management, and physical self-care are components to reducing the risk of developing MSDs. Work-place redesign and alterations in work flow management are discussed, and a template for a more ergonomically favorable echocardiogram table is provided. Copyright © 2013 Elsevier B.V. All rights reserved.

Ergonomics and design: its principles applied in the industry.

PubMed

Tavares, Ademario Santos; Silva, Francisco Nilson da

2012-01-01

Industrial Design encompasses both product development and optimization of production process. In this sense, Ergonomics plays a fundamental role, because its principles, methods and techniques can help operators to carry out their tasks most successfully. A case study carried out in an industry shows that the interaction among Design, Production Engineering and Materials Engineering departments may improve some aspects concerned security, comfort, efficiency and performance. In this process, Ergonomics had shown to be of essential importance to strategic decision making to the improvement of production section.

Ergonomics as a missing part of sustainability.

PubMed

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

AORN Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings.

PubMed

Hughes, Nancy L; Nelson, Audrey; Matz, Mary W; Lloyd, John

2011-06-01

Prolonged standing during surgical procedures poses a high risk of causing musculoskeletal disorders, including back, leg, and foot pain, which can be chronic or acute in nature. Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings provides recommendations for relieving the strain of prolonged standing, including the use of antifatigue mats, supportive footwear, and sit/stand stools, that are based on well-accepted ergonomic safety concepts, current research, and access to new and emerging technology. Published by Elsevier Inc.

Feminist-informed participatory action research: a methodology of choice for examining critical nursing issues.

PubMed

Corbett, Andrea M; Francis, Karen; Chapman, Ysanne

2007-04-01

Identifying a methodology to guide a study that aims to enhance service delivery can be challenging. Participatory action research offers a solution to this challenge as it both informs and is informed by critical social theory. In addition, using a feminist lens helps acquiesce this approach as a suitable methodology for changing practice. This methodology embraces empowerment self-determination and the facilitation of agreed change as central tenets that guide the research process. Encouraged by the work of Foucault, Friere, Habermas, and Maguire, this paper explicates the philosophical assumptions underpinning critical social theory and outlines how feminist influences are complimentary in exploring the processes and applications of nursing research that seeks to embrace change.

An ergonomic garment design for elderly Turkish men.

PubMed

Civitci, S Sule

2004-05-01

This paper presents an ergonomic garment design for elderly Turkish men. The purpose of this study was to determine elderly men's demands, needs and problems in regard to clothing and to design an ergonomic garment in the light of this knowledge. The sample consisted of 120 elderly men living in Ankara, the capital city of Turkey, and its province. A questionnaire was prepared and given to these people in order to determine their clothing demands and needs. It was established that most of our subjects need functional garments. An ergonomic garment has been designed using the obtained data. It was found that the design of clothing for the elderly requires attention to bodily changes from aging in order to facilitate and raise the quality of life. Specific suggestions are made to elderly people and to the ready-to-wear sector.

Work-Related Injuries of Radiologists and Possible Ergonomic Solutions: Recommendations From the ACR Commission on Human Resources.

PubMed

Sze, Gordon; Bluth, Edward I; Bender, Claire E; Parikh, Jay R

2017-10-01

Increasingly, radiologists' workplaces revolve around PACS and digital imaging. Use of these technologies can lead to repetitive strain injuries, many of which can be exacerbated by specific features of a radiology practice environment. Ergonomic approaches, such as proper reading room structure, lighting, temperature, noise, and equipment setup, can help decrease the frequency and severity of repetitive strain injuries and improve radiologist productivity. However, ergonomic approaches are complex, include all aspects of the radiology practice environment, and are best implemented along with proper training of the practicing radiologists. The ergonomic approaches considered most important by members of the ACR Commission on Human Resources are presented in this report, and this information may serve as an aid in departmental planning. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Ergonomic problems encountered by the surgical team during video endoscopic surgery.

PubMed

Kaya, Oskay I; Moran, Munevver; Ozkardes, Alper B; Taskin, Emre Y; Seker, Gaye E; Ozmen, Mahir M

2008-02-01

The aim of this study is to analyze the problems related to the ergonomic conditions faced by video endoscopic surgical teams during video endoscopic surgery by means of a questionnaire. A questionnaire was distributed to 100 medical personnel, from 8 different disciplines, who performed video endoscopic surgeries. Participants were asked to answer 13 questions related to physical, perceptive, and cognitive problems. Eighty-two questionnaires were returned. Although there were differences among the disciplines, participants assessment of various problems ranged from 32% to 72% owing to poor ergonomic conditions. As the problems encountered by the staff during video endoscopic surgery and the poor ergonomic conditions of the operating room affect the productivity of the surgical team and the safety and efficiency of the surgery, redesigning of the instruments and the operating room is required.

Letter regarding 'Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics' by Patrizi et al. and research reproducibility.

PubMed

2017-04-01

The reporting of research in a manner that allows reproduction in subsequent investigations is important for scientific progress. Several details of the recent study by Patrizi et al., 'Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics', are absent from the published manuscript and make reproduction of findings impossible. As new and complex technologies with great promise for ergonomics develop, new but surmountable challenges for reporting investigations using these technologies in a reproducible manner arise. Practitioner Summary: As with traditional methods, scientific reporting of new and complex ergonomics technologies should be performed in a manner that allows reproduction in subsequent investigations and supports scientific advancement.

Ergonomics in radiology.

PubMed

Goyal, N; Jain, N; Rachapalli, V

2009-02-01

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

Evaluation and control of ergonomics actions in federal public service: the case of FIOCRUZ-RJ.

PubMed

Ricarta, Simone L Santa Isabel; Vidala, Mario Cesar Rodriguez; Bonfattia, Renato José

2012-01-01

This article presents information about the development of the dissertation. Deals with the production of ergonomic diagnosis in the environments and work processes of an important center of research and development in Public Health, FIOCRUZ. Critically evaluates the performance of a team promoting and facilitating the process of implementing ergonomic changes suggested. Through analysis of documents and statements by some managers and representatives of Human Resources was possible to identify the factors that facilitate and hinder the implementation process, linking them to the organization of the institution and conduct of the agents involved. Finally, it makes a reflection on practice, results and developments involved in the processes of change initiated by the ergonomic actions, proposing its replication along with other institutes of the Civilian Personnel of Federal Public Administration.

Ergonomics in the electronic library.

PubMed Central

Thibodeau, P L; Melamut, S J

1995-01-01

New technologies are changing the face of information services and how those services are delivered. Libraries spend a great deal of time planning the hardware and software implementations of electronic information services, but the human factors are often overlooked. Computers and electronic tools have changed the nature of many librarians' daily work, creating new problems, including stress, fatigue, and cumulative trauma disorders. Ergonomic issues need to be considered when designing or redesigning facilities for electronic resources and services. Libraries can prevent some of the common problems that appear in the digital workplace by paying attention to basic ergonomic issues when designing workstations and work areas. Proper monitor placement, lighting, workstation setup, and seating prevent many of the common occupational problems associated with computers. Staff training will further reduce the likelihood of ergonomic problems in the electronic workplace. PMID:7581189

A question of our marketing or our preconceptions: commentary on the paper 'a strategy for human factors/ergonomics: developing the discipline and profession'.

PubMed

Nathanael, Dimitris; Marmaras, Nicolas

2012-01-01

The present paper is a commentary on the recently published IEA strategy for human factors/ergonomics (Dul, J., et al. (2012), A strategy for human factors/ergonomics: developing the discipline and profession. Ergonomics, 55(4), 377-395). Two main issues that demand attention are: (i) the way others understand our profession and discipline, and (ii) the way we understand our profession and added value to industry. First, it is advocated that the discussion on the future of human factors/ergonomics (HFE) should be focused more on the quality of the delivered value of HFE and less on its visibility and marketing. Second, the three fundamental characteristics of HFE, as proposed in the report, are discussed and the consequences of this proposal are further developed. Arguments are put forward on the endemic epistemological vagueness within the discipline and on the optimistic definition of its aim. Finally, a proposal is made at the epistemological level, which challenges some established convictions of the discipline. It is advocated that such an epistemological evolution may be necessary if HFE is to make progress towards contributing to system performance. The paper is a commentary on the IEA strategy for human factors/ergonomics. Issues discussed are, the way others understand our profession and the way we understand our profession and added value to industry. Some of the established convictions of the discipline are challenged and proposals are made to overcome these.

The impact of the alexander technique on improving posture and surgical ergonomics during minimally invasive surgery: pilot study.

PubMed

Reddy, Pramod P; Reddy, Trisha P; Roig-Francoli, Jennifer; Cone, Lois; Sivan, Bezalel; DeFoor, W Robert; Gaitonde, Krishnanath; Noh, Paul H

2011-10-01

One of the main ergonomic challenges during surgical procedures is surgeon posture. There have been reports of a high number of work related injuries in laparoscopic surgeons. The Alexander technique is a process of psychophysical reeducation of the body to improve postural balance and coordination, permitting movement with minimal strain and maximum ease. We evaluated the efficacy of the Alexander technique in improving posture and surgical ergonomics during minimally invasive surgery. We performed a prospective cohort study in which subjects served as their own controls. Informed consent was obtained. Before Alexander technique instruction/intervention subjects underwent assessment of postural coordination and basic laparoscopic skills. All subjects were educated about the Alexander technique and underwent post-instruction/intervention assessment of posture and laparoscopic skills. Subjective and objective data obtained before and after instruction/intervention were tabulated and analyzed for statistical significance. All 7 subjects completed the study. Subjects showed improved ergonomics and improved ability to complete FLS™ as well as subjective improvement in overall posture. The Alexander technique training program resulted in a significant improvement in posture. Improved surgical ergonomics, endurance and posture decrease surgical fatigue and the incidence of repetitive stress injuries to laparoscopic surgeons. Further studies of the influence of the Alexander technique on surgical posture, minimally invasive surgery ergonomics and open surgical techniques are warranted to explore and validate the benefits for surgeons. Copyright © 2011 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Nutra-ergonomics: influence of nutrition on physical employment standards and the health of workers.

PubMed

Shearer, Jane; Graham, Terry E; Skinner, Tina L

2016-06-01

The importance of ergonomics across several scientific domains, including biomechanics, psychology, sociology, and physiology, have been extensively explored. However, the role of other factors that may influence the health and productivity of workers, such as nutrition, is generally overlooked. Nutra-ergonomics describes the interface between workers, their work environment, and performance in relation to their nutritional status. It considers nutrition to be an integral part of a safe and productive workplace that encompasses physical and mental health as well as the long-term wellbeing of workers. This review explores the knowledge, awareness, and common practices of nutrition, hydration, stimulants, and fortified product use employed prior to physical employment standards testing and within the workplace. The influence of these nutra-ergonomic strategies on physical employment standards, worker safety, and performance will be examined. Further, the roles, responsibilities, and implications for the applicant, worker, and the employer will be discussed within the context of nutra-ergonomics, with reference to the provision and sustainability of an environment conducive to optimize worker health and wellbeing. Beyond physical employment standards, workplace productivity, and performance, the influence of extended or chronic desynchronization (irregular or shift work) in the work schedule on metabolism and long-term health, including risk of developing chronic and complex diseases, is discussed. Finally, practical nutra-ergonomic strategies and recommendations for the applicant, worker, and employer alike will be provided to enhance the short- and long-term safety, performance, health, and wellbeing of workers.

"Alarm-corrected" ergonomic armrest use could improve learning curves of novices on robotic simulator.

PubMed

Yang, Kun; Perez, Manuela; Hossu, Gabriela; Hubert, Nicolas; Perrenot, Cyril; Hubert, Jacques

2017-01-01

In robotic surgery, the professional ergonomic habit of using an armrest reduces operator fatigue and increases the precision of motion. We designed and validated a pressure surveillance system (PSS) based on force sensors to investigate armrest use. The objective was to evaluate whether adding an alarm to the PSS system could shorten ergonomic training and improve performance. Twenty robot and simulator-naïve participants were recruited and randomized in two groups (A and B). The PSS was installed on a robotic simulator, the dV-Trainer, to detect contact with the armrest. The Group A members completed three tasks on the dV-Trainer without the alarm, making 15 attempts at each task. The Group B members practiced the first two tasks with the alarm and then completed the final tasks without the alarm. The simulator provided an overall score reflecting the trainees' performance. We used the new concept of an "armrest load" score to describe the ergonomic habit of using the armrest. Group B had a significantly higher performance score (p < 0.001) and armrest load score (p < 0.001) than Group A from the fifth attempt of the first task to the end of the experiment. Based on the conditioned reflex effect, the alarm associated with the PSS rectified ergonomic errors and accelerated professional ergonomic habit acquisition. The combination of the PSS and alarm is effective in significantly shortening the learning curve in the robotic training process.

Wrong postural hygiene and ergonomics in dental students of the University of Valencia (Spain) (part I).

PubMed

Cervera-Espert, J; Pascual-Moscardó, A; Camps-Alemany, I

2018-02-01

Failure to adopt a correct working posture can lead to occupational diseases. Evaluate knowledge in relation to ergonomics about BHOP concept and its application to routine clinical practice amongst undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain). A study based on interviews of undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain) was carried out. The information from a total of 336 interviews was used for the statistical analysis, differentiating according to gender and academic year: knowledge of ergonomics, pain prevalence and antecedents, assessment of the possible necessity for improved training in ergonomics, and evaluation of postural hygiene. Only 28.6% of the students were found to sit correctly in the dentist chair. Furthermore, in the opinion of the students, very few subjects during the career afforded adequate teaching in relation to ergonomics and working posture. The analysis of postural hygiene showed great variability. There were no significant differences in posture between males and females, although some incorrect postures appeared to be associated with the academic year (P<.05). However, no significant improvements in postural hygiene were noted on progressing from one academic year to the next. The students in our study were not familiar with the principles of ergonomics and did not sit correctly in the dentist chair. Improved training in this field is required in dental school. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Postural Assessment of Students Evaluating the Need of Ergonomic Seat and Magnification in Dentistry.

PubMed

Dable, Rajani A; Wasnik, Pradnya B; Yeshwante, Babita J; Musani, Smita I; Patil, Ashishkumar K; Nagmode, Sunilkumar N

2014-12-01

Dental students using conventional chairs need immediate change in their posture. Implementing an ergonomic posture is necessary as they are at high risk for developing musculoskeletal disorders. This study recommends the use of an ergonomic seat and magnification system to enhance the visibility and the posture of an operator. The aim of this study is to make a foray into the hazards caused by inappropriate posture of dental students while working. It also aims at creating a cognizance about the related health implications among the dental fraternity at large, and to understand the significance of adopting an ergonomic posture since the beginning of the professional course. In the present study, postures have been assessed by using rapid upper limb assessment (RULA). This method uses diagrams of body postures and three scoring tables to evaluate ones exposure to risk factors. Ninety students from II BDS (preclinical students in the second year of dental school) were assessed in three groups using three different seats with and without magnification system. The results recorded significantly higher RULA scores for the conventional seats without using the magnification system compared to the SSC (Salli Saddle Chair-an ergonomic seat) with the use of magnification system. A poor ergonomic posture can make the dental students get habituated to the wrong working style which might lead to MSDs (Musculoskeletal diseases). It is advisable to acclimatize to good habits at the inception of the course, to prevent MSDs later in life.

An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.

PubMed

Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir

2016-06-14

Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p < 0.05). It can be concluded that using magnifying loupes reduced discomfort in different body regions and the whole body. A conclusion of this research is that ergonomic interventions can decrease MSDs of at risk body regions in the long term.

Guiding Blind Pedestrians with a Personal Navigation System

NASA Astrophysics Data System (ADS)

Dodson, A. H.; Moon, G. V.; Moore, T.; Jones, D.

With the assistance provided by the white cane or guide dog, most blind pedestrians can find their way to known destinations along familiar routes. Finding new or known destinations along unfamiliar routes is more challenging. Before such a journey is attempted, detailed instructions must be acquired. The difficulty of obtaining and then reliably following such instructions deters many blind pedestrians from travelling alone in unknown areas. This paper demonstrates a technological approach, by way of field trials, that supplements the existing aids and eliminates the need for sighted guides. The approach has the potential to offer greater independence to the blind person. The investigation suggests that the methodology used in personal navigation systems for the sighted is sub-optimal for guiding the blind pedestrian. Suitable extensions are introduced, and the results show the proposed methodology is efficient for guiding the blind individual to unknown destinations in the chosen field trial environment.

The methodological involvement of the emotional design and cognitive ergonomics as a tool in the development of children products.

PubMed

Correia, Walter; Rodrigues, Laís; Campos, Fábio; Soares, Marcelo; Barros, Marina

2012-01-01

To demonstrate the relationship between design and emotional development for kids, this article offers an initial approach about the definition and historical aspects of emotion in product development, citing the main authors of this issue. Based the field research conducted with children from 2 to 6 years of age, was also describes the basic ideas of Piaget in the child psychology and pre-operational stage (age group studied) and the significance of children's toys from the perspective of Vigostsky. Using this theoretical framework and results of field research, we can infer some emotional design as advocated by the producers of positive affect on humans and its relationship with the child's development and choices of their toys.

Towards a detailed anthropometric body characterization using the Microsoft Kinect.

PubMed

Domingues, Ana; Barbosa, Filipa; Pereira, Eduardo M; Santos, Márcio Borgonovo; Seixas, Adérito; Vilas-Boas, João; Gabriel, Joaquim; Vardasca, Ricardo

2016-01-01

Anthropometry has been widely used in different fields, providing relevant information for medicine, ergonomics and biometric applications. However, the existent solutions present marked disadvantages, reducing the employment of this type of evaluation. Studies have been conducted in order to easily determine anthropometric measures considering data provided by low-cost sensors, such as the Microsoft Kinect. In this work, a methodology is proposed and implemented for estimating anthropometric measures considering the information acquired with this sensor. The measures obtained with this method were compared with the ones from a validation system, Qualisys. Comparing the relative errors determined with state-of-art references, for some of the estimated measures, lower errors were verified and a more complete characterization of the whole body structure was achieved.

DHM and serious games: a case-study oil and gas laboratories.

PubMed

Santos, V; Zamberlan, M; Streit, P; Oliveira, J; Guimarães, C; Pastura, F; Cid, G

2012-01-01

The aim in this paper is to present a research on the application of serious games for the design of laboratories in the oil and gas industries. The focus is in human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. The laboratory studies were simulated in Unity3D platform, which allows the users to control the DHM1 on the dynamic virtual scenario, in order to simulate work activities. This methodology can change the design process by improving the level of interaction between final users, managers and human factor teams. That helps to better visualize future work settings and improve the level of participation between all stakeholders.

User-centered design and evaluation of a next generation fixed-split ergonomic keyboard.

PubMed

McLoone, Hugh E; Jacobson, Melissa; Hegg, Chau; Johnson, Peter W

2010-01-01

Research has shown that fixed-split, ergonomic keyboards lessen the pain and functional status in symptomatic individuals as well as reduce the likelihood of developing musculoskeletal disorders in asymptomatic typists over extended use. The goal of this study was to evaluate design features to determine whether the current fixed-split ergonomic keyboard design could be improved. Thirty-nine, adult-aged, fixed-split ergonomic keyboard users were recruited to participate in one of three studies. First utilizing non-functional models and later a functional prototype, three studies evaluated keyboard design features including: 1) keyboard lateral inclination, 2) wrist rest height, 3) keyboard slope, and 4) curved "gull-wing" key layouts. The findings indicated that keyboard lateral inclination could be increased from 8° to 14°; wrist rest height could be increased up to 10 mm from current setting; positive, flat, and negative slope settings were equally preferred and facilitated greater postural variation; and participants preferred a new gull-wing key layout. The design changes reduced forearm pronation and wrist extension while not adversely affecting typing performance. This research demonstrated how iterative-evaluative, user-centered research methods can be utilized to improve a product's design such as a fixed-split ergonomic keyboard.

ARBAN-A new method for analysis of ergonomic effort.

PubMed

Holzmann, P

1982-06-01

ARBAN is a method for the ergonomic analysis of work, including work situations which involve widely differing body postures and loads. The idea of the method is thal all phases of the analysis process that imply specific knowledge on ergonomics are teken over by filming equipment and a computer routine. All tasks that must be carried out by the investigator in the process of analysis are so designed that they appear as evident by the use of systematic common sense. The ARBAN analysis method contains four steps: 1. Recording of the workplace situation on video or film. 2. Coding the posture and load situation at a number of closely spaced 'frozen' situations. 3. Computerisation. 4. Evaluation of the results. The computer calculates figures for the total ergonomic stress on the whole body as well as on different parts of the body separately. They are presented as 'Ergonomic stress/ time curves', where the heavy load situations occur as peaks of the curve. The work cycle may also be divided into different tasks, where the stress and duration patterns can be compared. The integral of the curves are calculated for single-figure comparison of different tasks as well as different work situations.

Reducing musculoskeletal disorders among computer operators: comparison between ergonomics interventions at the workplace.

PubMed

Levanon, Yafa; Gefen, Amit; Lerman, Yehuda; Givon, Uri; Ratzon, Navah Z

2012-01-01

Typing is associated with musculoskeletal disorders (MSDs) caused by multiple risk factors. This control study aimed to evaluate the efficacy of a workplace intervention for reducing MSDs among computer workers. Sixty-six subjects with and without MSD were assigned consecutively to one of three groups: ergonomics intervention (work site and body posture adjustments, muscle activity training and exercises) accompanied with biofeedback training, the same ergonomics intervention without biofeedback and a control group. Evaluation of MSDs, body posture, psychosocial status, upper extremity (UE) kinematics and muscle surface electromyography were carried out before and after the intervention in the workplace and the motion lab. Our main hypothesis that significant differences in the reduction of MSDs will exist between subjects in the study groups and controls was confirmed (χ(2) = 13.3; p = 0.001). Significant changes were found in UE kinematics and posture as well. Both ergonomics interventions effectively reduced MSD and improved body posture. This study aimed to test the efficacy of an individual workplace intervention programme among computer workers by evaluating musculoskeletal disorders (MSDs), body posture, upper extremity kinematics, muscle activity and psychosocial factors were tested. The proposed ergonomics interventions effectively reduced MSDs and improved body posture.

Big data and ergonomics methods: A new paradigm for tackling strategic transport safety risks.

PubMed

Walker, Guy; Strathie, Ailsa

2016-03-01

Big data collected from On-Train Data Recorders (OTDR) has the potential to address the most important strategic risks currently faced by rail operators and authorities worldwide. These risk issues are increasingly orientated around human performance and have proven resistant to existing approaches. This paper presents a number of proof of concept demonstrations to show that long standing ergonomics methods can be driven from big data, and succeed in providing insight into human performance in a novel way. Over 300 ergonomics methods were reviewed and a smaller sub-set selected for proof-of-concept development using real on-train recorder data. From this are derived nine candidate Human Factors Leading Indicators which map on to all of the psychological precursors of the identified risks. This approach has the potential to make use of a significantly underused source of data, and enable rail industry stakeholders to intervene sooner to address human performance issues that, via the methods presented in this paper, are clearly manifest in on-train data recordings. The intersection of psychological knowledge, ergonomics methods and big data creates an important new framework for driving new insights. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics contribution to chemical risks prevention: An ergotoxicological investigation of the effectiveness of coverall against plant pest risk in viticulture.

PubMed

Garrigou, Alain; Baldi, Isabelle; Le Frious, Patricia; Anselm, Rémy; Vallier, Martine

2011-01-01

The purpose of this article is to present the contribution of a trans-disciplinary approach focused on ergonomics and chemical risk control. We shall more precisely discuss how such an approach carried out in the field of agricultural work has made it possible to highlight serious shortcomings in the effectiveness of the coveralls that are supposed to protect vineyard workers from pesticides. The study results, as well as the whistle-blow that followed have questioned the control and prevention measures used until then. The aforementioned trans-disciplinary approach gathers knowledge and methods from epidemiology, industrial hygiene, occupational health and safety and ergonomics. Ergonomics were central in the development of the approach as it connected task and activity analysis with contamination measurements. Lastly, the first results that were obtained have been confirmed and reused by the AFSSET (Agence Française de Sécurité Sanitaire Environnement et Travail, the French governmental agency in charge of environmental health and occupational health and safety issues) regarding the agricultural sector but also for all other situations in which workers use coveralls as protection against chemical risks. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Review of musculoskeletal injuries and prevention in the endoscopy practitioner.

PubMed

Harvin, Glenn

2014-08-01

Practitioners of endoscopy often experience musculoskeletal pain and injury (most often in the back, neck, shoulders, hands, wrists, and thumbs) that are associated with the minute and repetitive strain that is placed on these areas during endoscopic procedures. This review of the current documentation of endoscopy-related pain and injuries among practitioners finds that such problems are widespread and specific in kind as well as strongly correlated with high procedure volume and procedure duration. Research on the nature and impact of cumulative trauma and overuse syndromes in other professions such as dentistry, pianists, production labor, and athletics is brought to bear on the work of the endoscopist. A more thorough understanding of the nature and prevalence of work-related pain and injury sustained by endoscopists should inform further development of ergonomic practices and equipment design. This article reviews current recommendations for ergonomic design in the endoscopy procedure space and finds that reported compliance with those recommendations is quite low. Strategies for the management of the risk of musculoskeletal injuries related to the practice of endoscopy include compliance with currently recommended ergonomic practices, education of trainees in ergonomic technique when practicing endoscopy, and research toward the modification and development of more ergonomic endoscopes and procedure spaces.

Generation and use of human 3D-CAD models

NASA Astrophysics Data System (ADS)

Grotepass, Juergen; Speyer, Hartmut; Kaiser, Ralf

2002-05-01

Individualized Products are one of the ten mega trends of the 21st Century with human modeling as the key issue for tomorrow's design and product development. The use of human modeling software for computer based ergonomic simulations within the production process increases quality while reducing costs by 30- 50 percent and shortening production time. This presentation focuses on the use of human 3D-CAD models for both, the ergonomic design of working environments and made to measure garment production. Today, the entire production chain can be designed, individualized models generated and analyzed in 3D computer environments. Anthropometric design for ergonomics is matched to human needs, thus preserving health. Ergonomic simulation includes topics as human vision, reachability, kinematics, force and comfort analysis and international design capabilities. In German more than 17 billions of Mark are moved to other industries, because clothes do not fit. Individual clothing tailored to the customer's preference means surplus value, pleasure and perfect fit. The body scanning technology is the key to generation and use of human 3D-CAD models for both, the ergonomic design of working environments and made to measure garment production.

Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company.

PubMed

Quintana, Leonardo; Arias, Claudia; Cordoba, Jorge; Moroy, Magda; Pulido, Jean; Ramirez, Angela

2012-01-01

The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.

Ergonomic workplace assessment in orthotic and prosthetic workshops.

PubMed

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

NASA Astrophysics Data System (ADS)

Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

2018-01-01

This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

Ergonomics and musculoskeletal disorder: as an occupational hazard in dentistry.

PubMed

Gopinadh, Anne; Devi, Kolli Naga Neelima; Chiramana, Sandeep; Manne, Prakash; Sampath, Anche; Babu, Muvva Suresh

2013-03-01

Musculoskeletal disorders (MSDs) are commonly experienced in dentistry. The objective of this study is to determine the prevalence of ergonomics and MSDs among dental professionals. A cross-sectional survey was conducted among 170 dentists of different specialties. The questionnaire gathered information regarding demographic details, MSDs, work duration, working status, awareness of ergonomics, etc. Data was analyzed using SPSS version 15.0. Student's t-test and analysis of variance (ANOVA) test was used for comparison in mean scores. Stepwise multiple linear regression analysis was used to assess the independent variables that significantly influenced the variance in the dependent variable (pain). It was found that 73.9% of the participants reported musculoskeletal pain and most common painful sites were neck and back. More than half of the participants, i.e. 232 (59.3%) were aware of correct ergonomic posture regarding dental. Almost percentage of pain increased significantly with increase in age and working time. Among all specialties, prosthodontics were found to have more prevalence of MSDs. The appearance of musculoskeletal symptoms among dental professionals was quite common. It suggested that ergonomics should be covered in the educational system to reduce risks to dental practitioners.

Economic Ergonomic Approach to Design an Optimal Manpower and Mechanization in Rice Production

NASA Astrophysics Data System (ADS)

Muanah; Syuaib, M. F.; Liyantono

2018-05-01

Productivity of manpower could be improved by considering the economic and ergonomic aspect. The ergonomic aspect (human factor) is required to design an optimal manpower, while in the economic aspect, the well being of manpower could be evaluated from the amount of received income based on their work capability. This research was conducted on February 2016 to January 2017 in Gapoktan Silih Asih rice field Cigombong, Bogor. This study aims to analyze the income of manpower based on current conditions, increasement of working hours and mechanization addition. The results showed that manpower income based on the current condition and ergonomic consideration was Rp 1,174,030/person.month, by increasing the working hours with ergonomic consideration the obtained income was Rp 1,766,204/person.month. the revenues were based on the existing work system even though the increasement of working hours have not provided optimal income due to low productivity. Therefore the results of analysis with the addition of selective mechanization, showed self-ownership machinery was more profitable the obtained income have more than the Bogor minimum wage standard of Rp 2,969,325/person.month.

Climate change and forest trees in the Pacific Northwest: guide to vulnerability assessment methodology

Treesearch

W. Devine; C. Aubry; J. Miller; K. Potter; A. Bower

2012-01-01

This guide provides a step-by-step description of the methodology used to apply the Forest Tree Genetic Risk Assessment System (ForGRAS; Potter and Crane 2010) to the tree species of the Pacific Northwest in a recent climate change vulnerability assessment (Devine et al. 2012). We describe our modified version of the ForGRAS model, and we review the model’s basic...

Response-Guided Community Detection: Application to Climate Index Discovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bello, Gonzalo; Angus, Michael; Pedemane, Navya

Discovering climate indices-time series that summarize spatiotemporal climate patterns-is a key task in the climate science domain. In this work, we approach this task as a problem of response-guided community detection; that is, identifying communities in a graph associated with a response variable of interest. To this end, we propose a general strategy for response-guided community detection that explicitly incorporates information of the response variable during the community detection process, and introduce a graph representation of spatiotemporal data that leverages information from multiple variables. We apply our proposed methodology to the discovery of climate indices associated with seasonal rainfall variability.more » Our results suggest that our methodology is able to capture the underlying patterns known to be associated with the response variable of interest and to improve its predictability compared to existing methodologies for data-driven climate index discovery and official forecasts.« less

An Assessment of Student Computer Ergonomic Knowledge.

ERIC Educational Resources Information Center

Alexander, Melody W.

1997-01-01

Business students (n=254) were assessed on their knowledge of computers, health and safety, radiation, workstations, and ergonomic techniques. Overall knowledge was low in all categories. In particular, they had not learned computer-use techniques. (SK)

Ergonomics and safety in secondary wood processing

Treesearch

Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

2002-01-01

The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

Ergonomic Enhancement for Older Readers with Low Vision

ERIC Educational Resources Information Center

Watson, Gale R.; Ramsey, Vincent; De l'Aune, William; Elk, Arona

2004-01-01

This study found that the provision of ergonomic workstations for 12 older persons with age-related macular degeneration who used low vision devices significantly increased the participants' reading speed and decreased their discomfort when reading.

Baseline Evaluations to Support Control Room Modernization at Nuclear Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, Ronald L.; Joe, Jeffrey C.

2015-02-01

For any major control room modernization activity at a commercial nuclear power plant (NPP) in the U.S., a utility should carefully follow the four phases prescribed by the U.S. Nuclear Regulatory Commission in NUREG-0711, Human Factors Engineering Program Review Model. These four phases include Planning and Analysis, Design, Verification and Validation, and Implementation and Operation. While NUREG-0711 is a useful guideline, it is written primarily from the perspective of regulatory review, and it therefore does not provide a nuanced account of many of the steps the utility might undertake as part of control room modernization. The guideline is largely summative—intendedmore » to catalog final products—rather than formative—intended to guide the overall modernization process. In this paper, we highlight two crucial formative sub-elements of the Planning and Analysis phase specific to control room modernization that are not covered in NUREG-0711. These two sub-elements are the usability and ergonomics baseline evaluations. A baseline evaluation entails evaluating the system as-built and currently in use. The usability baseline evaluation provides key insights into operator performance using the control system currently in place. The ergonomics baseline evaluation identifies possible deficiencies in the physical configuration of the control system. Both baseline evaluations feed into the design of the replacement system and subsequent summative benchmarking activities that help ensure that control room modernization represents a successful evolution of the control system.« less

Comparative assessment of physical and cognitive ergonomics associated with robotic and traditional laparoscopic surgeries.

PubMed

Lee, Gyusung I; Lee, Mija R; Clanton, Tameka; Clanton, Tamera; Sutton, Erica; Park, Adrian E; Marohn, Michael R

2014-02-01

We conducted this study to investigate how physical and cognitive ergonomic workloads would differ between robotic and laparoscopic surgeries and whether any ergonomic differences would be related to surgeons' robotic surgery skill level. Our hypothesis is that the unique features in robotic surgery will demonstrate skill-related results both in substantially less physical and cognitive workload and uncompromised task performance. Thirteen MIS surgeons were recruited for this institutional review board-approved study and divided into three groups based on their robotic surgery experiences: laparoscopy experts with no robotic experience, novices with no or little robotic experience, and robotic experts. Each participant performed six surgical training tasks using traditional laparoscopy and robotic surgery. Physical workload was assessed by using surface electromyography from eight muscles (biceps, triceps, deltoid, trapezius, flexor carpi ulnaris, extensor digitorum, thenar compartment, and erector spinae). Mental workload assessment was conducted using the NASA-TLX. The cumulative muscular workload (CMW) from the biceps and the flexor carpi ulnaris with robotic surgery was significantly lower than with laparoscopy (p < 0.05). Interestingly, the CMW from the trapezius was significantly higher with robotic surgery than with laparoscopy (p < 0.05), but this difference was only observed in laparoscopic experts (LEs) and robotic surgery novices. NASA-TLX analysis showed that both robotic surgery novices and experts expressed lower global workloads with robotic surgery than with laparoscopy, whereas LEs showed higher global workload with robotic surgery (p > 0.05). Robotic surgery experts and novices had significantly higher performance scores with robotic surgery than with laparoscopy (p < 0.05). This study demonstrated that the physical and cognitive ergonomics with robotic surgery were significantly less challenging. Additionally, several ergonomic components were skill-related. Robotic experts could benefit the most from the ergonomic advantages in robotic surgery. These results emphasize the need for well-structured training and well-defined ergonomics guidelines to maximize the benefits utilizing the robotic surgery.

SPIDER: A Framework for Understanding Driver Distraction.

PubMed

Strayer, David L; Fisher, Donald L

2016-02-01

The objective was to identify key cognitive processes that are impaired when drivers divert attention from driving. Driver distraction is increasingly recognized as a significant source of injuries and fatalities on the roadway. A "SPIDER" model is developed that identifies key cognitive processes that are impaired when drivers divert attention from driving. SPIDER is an acronym standing for scanning, predicting, identifying, decision making, and executing a response. When drivers engage in secondary activities unrelated to the task of driving, SPIDER-related processes are impaired, situation awareness is degraded, and the ability to safely operate a motor vehicle may be compromised. The pattern of interference helps to illuminate the sources of driver distraction and may help guide the integration of new technology into the automobile. © 2015, Human Factors and Ergonomics Society.

How SEIPS can be used as a model for macroergonomic approach in subunit healthcare (Case study: The nurse perception of fatigue in surgery ward unit)

NASA Astrophysics Data System (ADS)

Iftadi, Irwan; Astuti, Rahmaniyah Dwi; Pristiyana, Ardian Ade

2017-11-01

Occupational fatigue in healthcare nurses, which has multifaceted issues, is associated with decreased patient safety and the quality of nursing care. The aim of this study was to investigate the nurses fatigue problem in sub-unit healthcare based on their perceptual experience. Interviews were conducted and analyzed utilizing a direct qualitative content analysis approach using NVivo Software and guided by Model of System Engineering Initiative for Patient Safety (SEIPS). The findings of this research were a steering on what nurses perceive as contributing and preventing to fatigue which are likewise arranged in SEIPS model. It was shown that a macro ergonomic approach is valuable for understanding complexities of work systems, even though it is a small unit organization.

High-Tech Comfort.

ERIC Educational Resources Information Center

Kennedy, Mike

2001-01-01

Explains why the influx of computers into classrooms means that schools need to pay more attention to ergonomic furnishings. The health risks of poorly designed furniture are discussed as are the kings of furniture that work best ergonomically for computer use. (GR)

Working Safe and Feeling Fine.

ERIC Educational Resources Information Center

Milshtein, Amy

1999-01-01

Discusses the problem of repetitive stress disorders in the administrative workplace and shares some quick fixes to aid ergonomics. Some thoughts on the ergonomics of office chairs are provided as is the use of professional guidance in furniture purchasing. (GR)

Visual ergonomics and computer work--is it all about computer glasses?

PubMed

Jonsson, Christina

2012-01-01

The Swedish Provisions on Work with Display Screen Equipment and the EU Directive on the minimum safety and health requirements for work with display screen equipment cover several important visual ergonomics aspects. But a review of cases and questions to the Swedish Work Environment Authority clearly shows that most attention is given to the demands for eyesight tests and special computer glasses. Other important visual ergonomics factors are at risk of being neglected. Today computers are used everywhere, both at work and at home. Computers can be laptops, PDA's, tablet computers, smart phones, etc. The demands on eyesight tests and computer glasses still apply but the visual demands and the visual ergonomics conditions are quite different compared to the use of a stationary computer. Based on this review, we raise the question if the demand on the employer to provide the employees with computer glasses is outdated.

Participatory ergonomic intervention for prevention of low back pain: assembly line redesign case.

PubMed

Bernardes, João Marcos; Wanderck, Claudia; Moro, Antônio Renato Pereira

2012-01-01

This paper gives an overview of a participatory ergonomic intervention aimed at reducing low back pain cases in the dispatch department of a catalogue and e-commerce retail company. Based on the findings of the ergonomic analysis and design committee, the company's own employees redesigned the assembly line's layout. As a result of these changes two job tasks that involved manual material handling of boxes, identified by the revised NIOSH equation as posing an increased risk for lifting-related low back pain, were totally eliminated, and the employees responsible for moving boxes from the end of the assembly line to pallets on the ground were given more control over their jobs, and these jobs were also enriched with a new, less heavy task. These results demonstrate that participatory ergonomic interventions are a viable and effective strategy to reduce the exposure to work-related physical and psychosocial risk factors for low back pain.

Ergonomics intervention on an alternative design of a spinal board.

PubMed

Zadry, Hilma Raimona; Susanti, Lusi; Rahmayanti, Dina

2017-09-01

A spinal board is the evacuation tool of first aid to help the injured spinal cord. The existing spinal board has several weaknesses, both in terms of user comfort and the effectiveness and efficiency of the evacuation process. This study designs an ergonomic spinal board using the quality function deployment approach. A preliminary survey was conducted through direct observation and interviews with volunteers from the Indonesian Red Cross. Data gathered were translated into a questionnaire and answered by 47 participants in West Sumatra. The results indicate that the selection of materials, the application of strap systems as well as the addition of features are very important in designing an ergonomic spinal board. The data were used in designing an ergonomic spinal board. The use of anthropometric data ensures that this product can accommodate safety and comfort when immobilized, as well as the flexibility and speed of the rescue evacuation process.

Economic evaluation of a participatory ergonomics intervention in a textile plant.

PubMed

Tompa, Emile; Dolinschi, Roman; Natale, Julianne

2013-05-01

In this study we report on the economic evaluation of a participatory ergonomics process undertaken at a clothing manufacturer in Southwestern Ontario, Canada that employs approximately 300 workers. We undertake a cost-benefit analysis from the company perspective. Intervention costs amounted to $65,787 and intervention benefits $360,614 (2011 Canadian dollars). The net present value was $294,827, suggesting that the intervention was worth undertaking based on the costs and consequences over the measurement period spanning more than four years. Based on these costs and benefits, the benefit-to-cost ratio is 5.5. Overall, the findings from this study suggest that participatory ergonomics interventions can be cost beneficial from the company perspective. Even though the changes were typically low-cost and low-tech interventions implemented by the plant mechanics and maintenance personnel, benefits were realized on both the health and financial fronts. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Finding ergonomic solutions--participatory approaches.

PubMed

Hignett, Sue; Wilson, John R; Morris, Wendy

2005-05-01

This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

School children's use of computers and teachers' education in computer ergonomics.

PubMed

Dockrell, S; Fallon, E; Kelly, M; Masterson, B; Shields, N

2007-10-01

A national survey to investigate the education of teachers in computer-related ergonomics was carried out by postal questionnaire. The use of computers by primary school children (age 4-12 years) was also investigated. Data were collected from a random sample of 25% (n = 830) of primary schools in the Republic of Ireland. Questionnaires (n = 1863) were returned from 416 schools giving a response rate of 50.1%. Almost all schools (99.7%) had computers for children's use. The computers were most often (69.8%) used in the classroom. The majority (56.3%) of children worked in pairs. Most teachers (89.6%) had received computer training, but few (17.6%) had received ergonomics information during the training. Respondents were not satisfied with their current knowledge of ergonomics. Over 90% stated that they would like to receive further information by printed format or during a training course, rather than by computer (web or CD-ROM).

Qualitative ergonomics/human factors research in health care: Current state and future directions.

PubMed

Valdez, Rupa Sheth; McGuire, Kerry Margaret; Rivera, A Joy

2017-07-01

The objective of this systematic review was to understand the current state of Ergonomics/Human Factors (E/HF) qualitative research in health care and to draw implications for future efforts. This systematic review identified 98 qualitative research papers published between January 2005 and August 2015 in the seven journals endorsed by the International Ergonomics Association with an impact factor over 1.0. The majority of the studies were conducted in hospitals and outpatient clinics, were focused on the work of formal health care professionals, and were classified as cognitive or organizational ergonomics. Interviews, focus groups, and observations were the most prevalent forms of data collection. Triangulation and data archiving were the dominant approaches to ensuring rigor. Few studies employed a formal approach to qualitative inquiry. Significant opportunities remain to enhance the use of qualitative research to advance systems thinking within health care. Copyright © 2017 Elsevier Ltd. All rights reserved.

Transforming a hospital safety and ergonomics program: a four year journey of change.

PubMed

Missar, Vicki J; Metcalfe, Don; Gilmore, Gail

2012-01-01

The conception of "Patient Safety" being the number one priority at Hospitals can reduce the emphasis on overall employee safety and health. This review examines a hospital's need to improve 24/7 active (i.e., not reactive) coverage, regulatory compliance, as well as the frequency and severity of employee injury losses. It also discusses a journey to integrate and improve safety and ergonomics to achieve these goals. Three approaches used by the ergonomist to create the transformation included: 1) adoption of the safety and ergonomic hazard identification; 2) safe patient handling; and 3) implementation of a 5S program. The results of the four (4) year effort at the not for profit, 637 bed, full service, acute-care hospital has shown a steady decline in frequency, reduced waste, and improved housekeeping. Ergonomists can have a key role in transforming Hospital Safety and Ergonomic Programs.

Poor sitting posture and a heavy schoolbag as contributors to musculoskeletal pain in children: an ergonomic school education intervention program

PubMed Central

Syazwan, AI; Azhar, MN Mohamad; Anita, AR; Azizan, HS; Shaharuddin, MS; Hanafiah, J Muhamad; Muhaimin, AA; Nizar, AM; Rafee, B Mohd; Ibthisham, A Mohd; Kasani, Adam

2011-01-01

Objectives The purpose of this study was to evaluate a multidisciplinary, interventional, ergonomic education program designed to reduce the risk of musculoskeletal problems by reducing schoolbag weight and correcting poor sitting posture. Methods Data were collected twice before and twice following intervention using the Standardized Nordic Body Map Questionnaire, a rapid upper limb assessment for posture evaluation, and schoolbag weight measurement in children aged 8 and 11 years attending two schools within the central region of Malaysia. Results Students who received the ergonomic intervention reported significant improvements in their sitting posture in a classroom environment and reduction of schoolbag weight as compared with the controls. Conclusion A single-session, early intervention, group ergonomics education program for children aged 8 and 11 years is appropriate and effective, and should be considered as a strategy to reduce musculoskeletal pain among schoolchildren in this age group. PMID:22003301

Web-based office ergonomics intervention on work-related complaints: a field study.

PubMed

Meinert, Marina; König, Mirjam; Jaschinski, Wolfgang

2013-01-01

The aim of this study was a proof of concept to examine the effects of a Web-based office ergonomics intervention on subjects' individual workplace adjustments. An intervention study was conducted with 24 office workers lasting 6 weeks with three consecutive phases (before, 1 and 5 weeks after the intervention). Employees used a purpose-made website for adjusting their computer workplaces without any personal support of ergonomics experts. Workplace measurements were taken directly on site and by analysing photos taken of the employee. Self-reported complaints were assessed by filling in a questionnaire. It was found that 96% of the employees changed their workplaces on their own and retained them mostly unchanged after the intervention. Furthermore, self-reported musculoskeletal complaints and headache symptoms decreased significantly after the intervention. These findings suggest an improvement of workplace conditions so that cost-effective ergonomic Web-based interventions appear promising in further research and application.

Ergonomic work analysis: A case study of bus drivers in the private collective transportation sector.

PubMed

Araújo, Adolfo Vicente; Arcanjo, Gemima Santos; Fernandes, Haroldo; Arcanjo, Georgia Santos

2018-05-03

The collective transportation system is essential to reduce the number of automobiles in the roads. Concerns exist related to quality, comfort and safety of bus driver's workstations. The objective of this study was to improve the driver's workstation in the private collective transportation sector by analyzing ergonomic practices using the Ergonomic Work Analysis (EWA). The EWA was chosen because it seeks to evaluate the labor condition as it relates to the psychophysiological conditions of workers, it complies with regulatory standard 17 (NR17). To identify driver concerns, interviews and questionnaires were administered. The workstation and worker routines were observed. The analysis revealed that the largest number of complaints related to noise, display light and location of the passenger identifier device. Drivers reported discomfort in the knees and lower back. Recommendations were made to improve the workstation and change the routine to minimize the discomfort and ergonomic risk factors.

Trapezius muscle activity in using ordinary and ergonomically designed dentistry chairs.

PubMed

Haddad, O; Sanjari, M A; Amirfazli, A; Narimani, R; Parnianpour, M

2012-04-01

Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Normalized EMG data showed significant reduction (p<0.05) in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Evaluation, Ethnography, and Auditing in Educational Research: Methodological and Conceptual Comparisons.

ERIC Educational Resources Information Center

Fetterman, David M.

The most important distinction between evaluation (in the psychometric tradition), ethnography, and auditing is that they are guided by three distinctively separate principles. The underlying principle guiding evaluation is assessment. Ethnography is guided by description. Auditing uses description and assessment to establish an opinion on…

Ergonomics in mining: the Chilean experience.

PubMed

Apud, Elías

2012-12-01

The objective of this article is to analyze the current state of knowledge regarding ergonomics in Chilean mining. Information has been gathered during the past 15 years from studies of Chilean miners. This article is based on a compilation of information of 700 workplaces where physical, mental, environmental, and organizational loads were evaluated with a systemic approach. The results of the Chilean experience reveal that it is important to overcome the concept of "static" ergonomics focused on workplaces that may be valid for offices and machine operation but not for a significant number of miners who will be moving around workstations located in systems of different complexity. The consequence of these complex and dynamic work situations is that more than 50% of absenteeism for health reasons is attributed to musculoskeletal disorders, and there are no standard recommendations that universally apply. The results showed that these problems can be tackled by implementing participatory programs. The main conclusion of the Chilean experience is that there is a need to continue advancing from diagnostic studies to participatory interventions. At the same time, it is imperative that all new investments in plants, small or large, include considerations of relevant ergonomic concepts from the early planning stages. It is also important to increase ergonomic training within companies, including not only the managers who make major decisions but also the workers who are directly affected by the lack of ergonomics. It is expected that this description of the Chilean experience may be useful for other countries where mining is also a source of income and employment.

The need for ergonomics considerations for the design and development of agricultural machinery in Thailand.

PubMed

Mamansari, D U; Salokhe, V M

1995-06-01

Agriculture plays an important role in developing countries which are mainly located in tropical regions. Agriculture is an industry with tremendous opportunities for the application of ergonomics principles. Working conditions are extremely difficult due to severe environmental conditions, long working hours, strenuous work and the use of mobile equipment. The ignorance of the majority of ergonomics principles in the design of agricultural equipment make the conditions more difficult. Thailand is one of the important suppliers of agricultural products in the world. Mechanization has expanded tremendously during the last 10 years and the number of agricultural machinery has rapidly increased. This paper looks at ergonomics principles which must be considered in the design and development of agricultural machines and equipment used in Thailand. It was identified that the common farming system in Thailand is rice-based cultivation, mostly in swampy conditions with heavy clay soil. It was also found that the most energy-consuming task in agriculture was primary cultivation. The most widely used machine is a power tiller which is suitable for the farm sizes available and can be operated easily. Most of the power tillers and other equipment were found to be locally made, with less than 5% imported. Unfortunately, there was no standardization in power tiller manufacturing which led to increasing farmers' strain. There is still a need to collect more ergonomics data of Thai farmers such as anthropometry, strength and physical work capacity for the design and development of agricultural machines and equipment used in Thailand. Different ergonomic consideration for the design and development of agricultural machinery have been suggested.

Initial experience using a robotic-driven laparoscopic needle holder with ergonomic handle: assessment of surgeons' task performance and ergonomics.

PubMed

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M

2017-12-01

The objective of this study is to assess the surgeons' performance and ergonomics during the use of a robotic-driven needle holder in laparoscopic suturing tasks. Six right-handed laparoscopic surgeons with different levels of experience took part in this study. Participants performed a set of three different intracorporeal suturing tasks organized in ten trials during a period of five weeks. Surgeons used both conventional (Conv) and robotic (Rob) laparoscopic needle holders. Precision using the surgical needle, quality of the intracorporeal suturing performance, execution time and leakage pressure for the urethrovesical anastomosis, as well as the ergonomics of the surgeon's hand posture, were analyzed during the first, fifth and last trials. No statistically significant differences in precision and quality of suturing performance were obtained between both groups of instruments. Surgeons required more time using the robotic instrument than using the conventional needle holder to perform the urethrovesical anastomosis, but execution time was significantly reduced after training ([Formula: see text] 0.05). There were no differences in leakage pressure for the anastomoses carried out by both instruments. After training, novice surgeons significantly improved the ergonomics of the wrist ([Formula: see text] 0.05) and index finger (Conv: 36.381[Formula: see text], Rob: 30.389[Formula: see text]; p = 0.024) when using the robotic instrument compared to the conventional needle holder. Results have shown that, although both instruments offer similar technical performance, the robotic-driven instrument results in better ergonomics for the surgeon's hand posture compared to the use of a conventional laparoscopic needle holder in intracorporeal suturing.

The modulation of upper extremity musculoskeletal disorders for a knowledge worker with chiropractic care and applied ergonomics: a case study

PubMed Central

Sherrod, Charles W.; Casey, George; Dubro, Robert E.; Johnson, Dale F.

2013-01-01

Objective This report describes the case management of musculoskeletal disorders for an employee in a college work environment using both chiropractic care and applied ergonomics. Clinical Findings A 54-year-old male office worker presented with decreased motor function in both wrists; intermittent moderate-to-severe headaches; and pain or discomfort in the neck, both shoulders, left hand and wrist, and lumbosacral region resulting from injuries sustained during recreational soccer and from excessive forces and awkward postures when interacting with his home and office computer workstations. Intervention and Results Ergonomic training, surveillance, retrofitted equipment with new furniture, and an emphasis on adopting healthy work-style behaviors were applied in combination with regular chiropractic care. Baseline ergonomic job task analysis identified risk factors and delineated appropriate control measures to improve the subject's interface with his office workstation. Serial reevaluations at 3-month, 1-year, and 2-year periods recorded changes to the participant's pain, discomfort, and work-style behaviors. At end of study and relative to baseline, pain scale improved from 4/10 to 2/10; general disability improved from 4 to 0; and hand grip strength (pounds) increased from 20 to 105 (left) and 45 to 100 (right). Healthy work habits and postures adopted in the 3-month to 1-year period regressed to baseline exposures for 3 of 6 risk priorities identified in the ergonomic job task analysis. Conclusion The patient responded positively to the intervention of chiropractic care and applied ergonomics. PMID:23997724

Ergonomics for Online Searching.

ERIC Educational Resources Information Center

Wright, Carol; Friend, Linda

1992-01-01

Describes factors to be considered in the design of ergonomically correct workstations for online searchers. Topics discussed include visual factors, including lighting; acoustical factors; radiation and visual display terminals (VDTs); screen image characteristics; static electricity; hardware and equipment; workstation configuration; chairs;…

Global Surface Temperature Anomalies and Attribution

NASA Astrophysics Data System (ADS)

Pietrafesa, L. J.

2017-12-01

We study Non-Stationary, Non-Linear time series of global surface temperatures from 1850 to 2016, and via an empirical, mathematical methodology, we reveal the buried, internal modes of variability of planetary temperatures over the past 167 years, and find periods of cooling and warming, both in the ocean and the atmosphere over land, with multiple modes of variability; seasonal, annual, inter-annual, multi-year, decadal, multi-decadal, centennial and overall warming trends in the ocean, atmosphere and the combination therein. The oceanic rate of warming is less than two thirds of that of the atmosphere. While our findings on overall trends of fossil fuel burning and planetary temperatures are only visually correlative, by employing a mathematical methodology well known in ergonomics, this study causally links the upward rise in planetary surface temperature from the latter part of the 19th Century and into the 21st Century, to the contemporaneous upward rise in fossil fuel burning and suggests that if present fossil fuel burning is not curtailed there will be continued warming of the planet in the future.

Bits, Bytes, and Backaches.

ERIC Educational Resources Information Center

Sturgeon, Julie

1999-01-01

Examines the potential problems facing educational institutions from the impact of computer use, ergonomics, and physical injuries. Paying attention to ergonomics and solutions through proper furniture buying are discussed. Tips to help institutions reduce the possibility of children suffering painful and possibly disabling injuries are…

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

This paper describes ergonomics and the need to adapt worksites and technologies for individuals with physical or sensory disabilities. It provides suggestions for how to design an appropriate setup, design considerations, environmental considerations, chairs, monitor height, ambient noise, light, and electricity. Recommendations include: (1)…

The influence of ergonomic factors and perceptual-motor abilities on handwriting performance.

PubMed

Tseng, M H; Cermak, S A

1993-10-01

Difficulty with handwriting is one of the most frequent reasons that children in the public schools are referred to occupational therapy. Current research on the influence of ergonomic factors, such as pencil grip and pressure, and perceptual-motor factors traditionally believed to affect handwriting, is reviewed. Factors such as visual perception show little relationship to handwriting, whereas tactile-kinesthetic, visual-motor, and motor planning appear to be more closely related to handwriting. By better understanding the ergonomic and perceptual-motor factors that contribute to and influence handwriting, therapists will be better able to design rationally based intervention programs.

Teaching ergonomics to nursing facility managers using computer-based instruction.

PubMed

Harrington, Susan S; Walker, Bonnie L

2006-01-01

This study offers evidence that computer-based training is an effective tool for teaching nursing facility managers about ergonomics and increasing their awareness of potential problems. Study participants (N = 45) were randomly assigned into a treatment or control group. The treatment group completed the ergonomics training and a pre- and posttest. The control group completed the pre- and posttests without training. Treatment group participants improved significantly from 67% on the pretest to 91% on the posttest, a gain of 24%. Differences between mean scores for the control group were not significant for the total score or for any of the subtests.

Ergonomics in gynecologists' daily practice: A nationwide survey in The Netherlands.

PubMed

Alleblas, Chantal C J; Formanoy, Margriet A G; Könemann, Reinier; Radder, Celine M; Huirne, Judith A; Nieboer, Theodoor E

2016-01-01

Gynecologists are exposed to multiple risk factors for developing physical complaints. To enhance the workplace ergonomics in gynecological practice, a more detailed insight about job content and associated demands is necessary to subsequently decrease the exposure to risk factors. The aim of this study was to investigate the prevalence of physical complaints and the presence of ergonomic constraints in Dutch gynecological practice. A questionnaire was distributed among the 1200 members of the Dutch Society of Obstetrics and Gynecology. It consisted of 52 Dutch questions derived from the validated Dutch Musculoskeletal Questionnaire. A total of 227 respondents completed the questionnaire (response rate 18.9%). Overall, 99.5% of the respondents rated their health status as reasonable or good. However, the twelve-month prevalence of physical complaints in one or more body part was 89.4%. Sustained adverse body postures were particularly reported for performing abdominal, and endoscopic surgery, and for assisting in vaginal surgery. Limited workspace, instruments, and patient size were reported by more than 60% of the respondents as constraints for adopting a neutral body posture during vaginal, endoscopic and abdominal surgery respectively. The results emphasize the necessity of enhancing ergonomics in gynecological practice. Better ergonomic circumstances will most likely benefit both the health of the gynecologists as well as the quality of surgical care.

Ergonomics and regulatory politics: the Washington State case.

PubMed

Silverstein, Michael

2007-05-01

Every year in the State of Washington more than 50,000 workers experience a work related musculoskeletal disorder (WMSD), making up more than 30% of all worker compensation cases. In 2000, the Washington State Department of Labor and Industries (L&I) adopted a workplace ergonomics rule requiring employers to reduce worker exposure to hazards that cause or contribute to WMSDs. In 2003, the ergonomics rule was repealed by a margin of 53.5-46.5 in a statewide voter initiative. The official rulemaking record of approximately 100,000 pages, along with supplementary published and unpublished material, was reviewed. The relationship between scientific deliberation and the public policy process in adopting and repealing the ergonomics rule was assessed and described. The deliberative features of the regulatory, judicial, legislative, and ballot processes were compared. The ergonomics rule was successful in the regulatory and legal arenas where the process was most transparent and open to public involvement, differing views could be presented fully, and decision makers were expected to explain their decisions in light of the record. The rule fared most poorly in the legislature and at the ballot box when these features were lost and where considered deliberation was replaced by unconstrained political conflict. Additional checks and balances are needed.

Design improvement of automated gallon washing machine to minimize musculoskeletal disorders (MSDs) in CV Barokah Abadi using ergonomic function deployment (EFD) approach

NASA Astrophysics Data System (ADS)

Fakhriza, Z.; Rahayu, M.; Iqbal, M.

2017-12-01

In the production activity of Bottled Drinking Water (AMDK) in CV Barokah Abadi there is a gallon washing station. At the work station it involves three stages of activity such as washing and rinsing the outside of the gallon, spraying the inside of the gallon and rubbing the inside of the gallon which is done in a separate place. Distribution of Nordic Body Map (NBM) questionnaires showing employee complaints data at gallon washing stations where workers complained of pain in the right upper arm, right forearm and right wrist respectively 88% and workers also complained of pain in the waist and The right hand respectively by 81%. Ergonomic gallon washer is one way to minimize the risk of MSDs. The design begins with an ergonomic evaluation of the existing conditions and the concept of the initial design of the gallon washer. The evaluation is utilized for consideration of design improvements with the utilization of Ergonomic Function Deployment (EFD) in order for the product concept to conform to the ECSHE principle (Effective, Comfortable, Safe, Healthy and Efficient). The tool improvement design can minimize the risk of MSDs seen from the worker’s posture while using an ergonomic washer.

Use of Solar Energy Hybrid Dryer with Techno-Ergonomic Application to Increase Productivity of Dodol Wokers in Buleleng, Bali

NASA Astrophysics Data System (ADS)

Santosa, I. G.; Sutarna, I. N.

2018-01-01

Penglatan Village is one of dodol industrial centres in Buleleng Regency, Bali. Dodol is a balinese traditional snack that usually used for religion ceremonies offering or “sesajen”. Dodol’s making processes had several layer of stages, from making dough, stirring dough, packaging and drying dodol. Because the drying process is done with traditional work tools, this process cause several ergonomic problems. Based on preliminary research, the complaints that felt by dodol workers are pain in the neck, shoulders, back, waist, head, and hands. Therefore, productivity of workers are decreasing. This problem solved by designing a hybrid solar drying tools with the application of techno-ergonomic, appropriate technology concept (TTG) and from ergonomic science with the application of SHIP concept (systemic, holistic, interdisciplinary, participatory). This research use 20 people as sample. The sample performance is observed while working traditionally and using techno-ergonomic hybrid solar dryer tools. The measurements conducted three times which are First Period (PI), Second Period (PII), and Third Period (PIII) with interspersed time for rest. WOP (washing out period) is intended to eliminate residual effects. The data were analyzed with SPSS program with significance level of 0.05. Hopefully, with this solution will improve worker productivity.

Review of Musculoskeletal Injuries and Prevention in the Endoscopy Practitioner

PubMed Central

2014-01-01

Practitioners of endoscopy often experience musculoskeletal pain and injury (most often in the back, neck, shoulders, hands, wrists, and thumbs) that are associated with the minute and repetitive strain that is placed on these areas during endoscopic procedures. This review of the current documentation of endoscopy-related pain and injuries among practitioners finds that such problems are widespread and specific in kind as well as strongly correlated with high procedure volume and procedure duration. Research on the nature and impact of cumulative trauma and overuse syndromes in other professions such as dentistry, pianists, production labor, and athletics is brought to bear on the work of the endoscopist. A more thorough understanding of the nature and prevalence of work-related pain and injury sustained by endoscopists should inform further development of ergonomic practices and equipment design. This article reviews current recommendations for ergonomic design in the endoscopy procedure space and finds that reported compliance with those recommendations is quite low. Strategies for the management of the risk of musculoskeletal injuries related to the practice of endoscopy include compliance with currently recommended ergonomic practices, education of trainees in ergonomic technique when practicing endoscopy, and research toward the modification and development of more ergonomic endoscopes and procedure spaces. PMID:24798940

Meeting the challenge of interpretation: Hearing the voices of people with intellectual and developmental disability through I-Poems.

PubMed

Corby, Deirdre; Taggart, Laurence; Cousins, Wendy

2018-06-01

Including the inner perspectives of people who have intellectual disability can pose methodological challenges to qualitative researchers. This article explains how the Listening Guide was applied as an additional step in the analysis during a study which used hermeneutic interviews with people with intellectual disability as the sole method of data collection. An argument is made for the systematic application of the guide with a focus on the use of I-Poems. This article advances qualitative methodological approaches and concludes that this method of drawing attention to the participants' own voices provides a unique basis for interpreting interviews and tasks researchers to examine the use of the Listening Guide.

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance; Grocery Stores (Revised) (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendron, B.

2013-07-01

The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders successfully plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited in these guides. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. Grocery stores were selected as one of the highest priority sectors, because they represent one of the most energy-intensive marketmore » segments.« less

Physical human-robot interaction of an active pelvis orthosis: toward ergonomic assessment of wearable robots.

PubMed

d'Elia, Nicolò; Vanetti, Federica; Cempini, Marco; Pasquini, Guido; Parri, Andrea; Rabuffetti, Marco; Ferrarin, Maurizio; Molino Lova, Raffaele; Vitiello, Nicola

2017-04-14

In human-centered robotics, exoskeletons are becoming relevant for addressing needs in the healthcare and industrial domains. Owing to their close interaction with the user, the safety and ergonomics of these systems are critical design features that require systematic evaluation methodologies. Proper transfer of mechanical power requires optimal tuning of the kinematic coupling between the robotic and anatomical joint rotation axes. We present the methods and results of an experimental evaluation of the physical interaction with an active pelvis orthosis (APO). This device was designed to effectively assist in hip flexion-extension during locomotion with a minimum impact on the physiological human kinematics, owing to a set of passive degrees of freedom for self-alignment of the human and robotic hip flexion-extension axes. Five healthy volunteers walked on a treadmill at different speeds without and with the APO under different levels of assistance. The user-APO physical interaction was evaluated in terms of: (i) the deviation of human lower-limb joint kinematics when wearing the APO with respect to the physiological behavior (i.e., without the APO); (ii) relative displacements between the APO orthotic shells and the corresponding body segments; and (iii) the discrepancy between the kinematics of the APO and the wearer's hip joints. The results show: (i) negligible interference of the APO in human kinematics under all the experimented conditions; (ii) small (i.e., < 1 cm) relative displacements between the APO cuffs and the corresponding body segments (called stability); and (iii) significant increment in the human-robot kinematics discrepancy at the hip flexion-extension joint associated with speed and assistance level increase. APO mechanics and actuation have negligible interference in human locomotion. Human kinematics was not affected by the APO under all tested conditions. In addition, under all tested conditions, there was no relevant relative displacement between the orthotic cuffs and the corresponding anatomical segments. Hence, the physical human-robot coupling is reliable. These facts prove that the adopted mechanical design of passive degrees of freedom allows an effective human-robot kinematic coupling. We believe that this analysis may be useful for the definition of evaluation metrics for the ergonomics assessment of wearable robots.

Unit Reference Sheet (URS) Cost Methodology.

DTIC Science & Technology

1980-08-01

LAUNCHER MONORAIL GUIDED MISSILE: W/E (NIKE-HERCULES) L45740 LAUNCHER TUBULAR GUIDED MISSILE: (TOW) L45757 LAUNCHER ZERO LENGTH GUIDED MISSILE: (IMP-HAWK...L76762 LOADER TRANSPORTER GUIDED MISSILE: W/E (HAWK) M57503 MOBILE TARGET TRACKING SYSTEM: USED TO SUPPORT MQM 34 ( FIRE BEE) M57549 MOBILITY KIT GUIDED...HIGH RATE THREE BARREL W/E J96479 GUN AUTOMATIC 20 MILLIMETER: GAS OPERATED MANUAL OR ELECT FIRED J96481 GUN AUTOMATIC 20 MILLIMETER: ELECTRIC J96694 GUN

Alcohol Abuse Curriculum Guide for Nurse Practitioner Faculty. Health Professions Education Curriculum Resources Series. Nursing 3.

ERIC Educational Resources Information Center

Hasselblad, Judith

The format for this curriculum guide, written for nurse practitioner faculty, consists of learning objectives, content outline, teaching methodology suggestions, references and recommended readings. Part 1 of the guide, Recognition of Early and Chronic Alcoholism, deals with features of alcoholism such as epidemiological data and theories,…

Silvicultural guide for northern hardwoods in the northeast

Treesearch

William B. Leak; Mariko Yamasaki; Robbo. Holleran

2014-01-01

This revision of the 1987 silvicultural guide includes updated and expanded silvicultural information on northern hardwoods as well as additional information on wildlife habitat and the management of mixed-wood and northern hardwood-oak stands. The prescription methodology is simpler and more field-oriented. This guide also includes an appendix of familiar tables and...

Ergonomic Redesign of an Industrial Control Panel.

PubMed

Raeisi, S; Osqueizadeh, R; Maghsoudipour, M; Jafarpisheh, A S

2016-07-01

Operator's role in industrial control centers takes place in time, which is one of the most important determinants of whether an expected action is going to be successful or not. In certain situations, due to the complex nature of the work, the existing interfaces and already prepared procedures do not meet the dynamic requirements of operator's cognitive demands, making the control tasks unnecessarily difficult. This study was conducted to identify ergonomic issues with a specific industrial control panel, and redesign its layout and elements to enhance its usability. Task and link analysis methodologies were implemented. All essential functions and supporting operations were identified at the required trivial levels. Next, the weight of any possible link between the elements of the panel was computed as a composite index of frequency and importance. Finally, all components were rearranged within a new layout, and a computerized mockup was generated. A total of 8 primary tasks was identified, including 4 system failure handling tasks, switching between manual and automated modes, and 3 types of routine vigilance and control tasks. These tasks were broken down into 28 functions and 145 supporting operations, accordingly. Higher link values were observed between hand rest position and 2 elements. Also, 6 other components showed robust linkages. In conclusion, computer modeling can reduce the likelihood of accidents and near misses in industrial control rooms by considering the operators' misperception or mental burden and correcting poor design of the panels and inappropriate task allocation.

Understanding decision-making towards housework among women with upper limb repetitive strain injury.

PubMed

Cheung, Therma W C; Clemson, Lindy; O'Loughlin, Kate; Shuttleworth, Russell

2016-02-01

Among women with upper limb repetitive strain injury (RSI), occupational therapy interventions include education to facilitate ergonomic practices in housework. From a client-centred perspective, an understanding of women's decision-making about housework is needed to design effective occupational therapy programmes. This study addresses a gap in research in this area by exploring women's views about changing housework habits. The aim was to construct a conceptual representation to explain decision-making in housework by drawing on experiences of a sample of Singapore Chinese women with upper limb RSI from one hand therapy clinic. Based on a constructivist grounded theory methodology, data were collected through in-depth interviewing with 15 women. Interviews were audiotaped and transcribed. Data were analysed with line by line coding, focussed coding and axial coding with constant comparison throughout data collection. Decision-making in housework among these women involved three main themes: (i) emotional attachment to housework; (ii) cognitively informed decision; and (iii) emotionally influenced decision. Women with upper limb RSI had to make cognitive decisions for or against a change in housework to manage their condition. However, the women's cognitively informed decisions were shaped by their emotional attachment to housework. As such, they experienced strong emotional barriers to changing their housework practices even when they had cognitively accepted the necessity and possibility of making a change. Therapists need to be aware that counselling to address the emotional barriers experienced by women is important during ergonomic education. © 2016 Occupational Therapy Australia.

An integrated biomechanical modeling approach to the ergonomic evaluation of drywall installation.

PubMed

Yuan, Lu; Buchholz, Bryan; Punnett, Laura; Kriebel, David

2016-03-01

Three different methodologies: work sampling, computer simulation and biomechanical modeling, were integrated to study the physical demands of drywall installation. PATH (Posture, Activity, Tools, and Handling), a work-sampling based method, was used to quantify the percent of time that the drywall installers were conducting different activities with different body segment (trunk, arm, and leg) postures. Utilizing Monte-Carlo simulation to convert the categorical PATH data into continuous variables as inputs for the biomechanical models, the required muscle contraction forces and joint reaction forces at the low back (L4/L5) and shoulder (glenohumeral and sternoclavicular joints) were estimated for a typical eight-hour workday. To demonstrate the robustness of this modeling approach, a sensitivity analysis was conducted to examine the impact of some quantitative assumptions that have been made to facilitate the modeling approach. The results indicated that the modeling approach seemed to be the most sensitive to both the distribution of work cycles for a typical eight-hour workday and the distribution and values of Euler angles that are used to determine the "shoulder rhythm." Other assumptions including the distribution of trunk postures did not appear to have a significant impact on the model outputs. It was concluded that the integrated approach might provide an applicable examination of physical loads during the non-routine construction work, especially for those operations/tasks that have certain patterns/sequences for the workers to follow. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Tennessee long-range transportation plan : project evaluation system

DOT National Transportation Integrated Search

2005-12-01

The Project Evaluation System (PES) Report is an analytical methodology to aid programming efforts and prioritize multimodal investments. The methodology consists of both quantitative and qualitative evaluation criteria built upon the Guiding Princip...

Flexible omnidirectional carbon dioxide laser as an effective tool for resection of brainstem, supratentorial, and intramedullary cavernous malformations.

PubMed

Choudhri, Omar; Karamchandani, Jason; Gooderham, Peter; Steinberg, Gary K

2014-03-01

Lasers have a long history in neurosurgery, yet bulky designs and difficult ergonomics limit their use. With its ease of manipulation and multiple applications, the OmniGuide CO2 laser has reintroduced laser technology to the microsurgical resection of brain and spine lesions. This laser, delivered through a hollow-core fiber lined with a unidirectional mirror, minimizes energy loss and allows precise targeting. To analyze resections performed by the senior author from April 2009 to March 2013 of 58 cavernous malformations (CMs) in the brain and spine with the use of the OmniGuide CO2 laser, to reflect on lessons learned from laser use in eloquent areas, and to share data on comparisons of laser power calibration and histopathology. Data were collected from electronic medical records, radiology reports, operative room records, OmniGuide CO2 laser case logs, and pathology records. Of 58 CMs, approximately 50% were in the brainstem (30) and the rest were in supratentorial (26) and intramedullary spinal locations (2). Fifty-seven, ranging from 5 to 45 mm, were resected, with a subtotal resection in 1. Laser power ranged from 2 to 10 W. Pathology specimens showed minimal thermal damage compared with traditionally resected specimens with bipolar coagulation. The OmniGuide CO2 laser is safe and has excellent precision for the resection of supratentorial, brainstem, and spinal intramedullary CMs. No laser-associated complications occurred, and very low energy was used to dissect malformations from their surrounding hemosiderin-stained parenchymas. The authors recommend its use for deep-seated and critically located CMs, along with traditional tools.

Better Work Environments.

ERIC Educational Resources Information Center

Murray, Chris

2002-01-01

Looks at equipment, process, and training aspects of backpack vacuum cleaners that facilitate good ergonomics and high productivity levels, focusing on: designing new equipment for bodies and productivity; creating comfortable backpack harnesses; improving the work process via team training; and providing ergonomic training to ensure that backpack…

Bridging the Digital Divide through Online Conferencing: Lessons from the CybErg Conference Series

DTIC Science & Technology

2004-06-01

Development, University of the Witwatersrand, South Africa. b Department of Human Kinetics & Ergonomics, Rhodes University, South Africa. Abstract...Witwatersrand, South Africa; Department of Human Kinetics & Ergonomics, Rhodes University, South Africa 8. PERFORMING ORGANIZATION REPORT NUMBER 9

Applying ergonomics to systems: some documented "lessons learned".

PubMed

Hendrick, Hal W

2008-07-01

Based on evidence accumulated during the author's 45 years of professional experience, the author presents 23 important "lessons learned" regarding applying ergonomics to systems. Documented results from reported cases or other evidence are presented to validate each of these practical learning points.

[Musculoskeletal disorders among university student computer users].

PubMed

Lorusso, A; Bruno, S; L'Abbate, N

2009-01-01

Musculoskeletal disorders are a common problem among computer users. Many epidemiological studies have shown that ergonomic factors and aspects of work organization play an important role in the development of these disorders. We carried out a cross-sectional survey to estimate the prevalence of musculoskeletal symptoms among university students using personal computers and to investigate the features of occupational exposure and the prevalence of symptoms throughout the study course. Another objective was to assess the students' level of knowledge of computer ergonomics and the relevant health risks. A questionnaire was distributed to 183 students attending the lectures for second and fourth year courses of the Faculty of Architecture. Data concerning personal characteristics, ergonomic and organizational aspects of computer use, and the presence of musculoskeletal symptoms in the neck and upper limbs were collected. Exposure to risk factors such as daily duration of computer use, time spent at the computer without breaks, duration of mouse use and poor workstation ergonomics was significantly higher among students of the fourth year course. Neck pain was the most commonly reported symptom (69%), followed by hand/wrist (53%), shoulder (49%) and arm (8%) pain. The prevalence of symptoms in the neck and hand/wrist area was signifcantly higher in the students of the fourth year course. In our survey we found high prevalence of musculoskeletal symptoms among university students using computers for long time periods on a daily basis. Exposure to computer-related ergonomic and organizational risk factors, and the prevalence ofmusculoskeletal symptoms both seem to increase significantly throughout the study course. Furthermore, we found that the level of perception of computer-related health risks among the students was low. Our findings suggest the need for preventive intervention consisting of education in computer ergonomics.

Development of a method to assess compliance with ergonomic posture in dental students

PubMed Central

Garcia, Patrícia Petromilli Nordi Sasso; Wajngarten, Danielle; Campos, Juliana Alvares Duarte Bonini

2018-01-01

CONTEXT: The ergonomic posture protocol is extremely important for the maintenance of occupational health in dentistry. The lack of compliance with this protocol results in a high risk of developing musculoskeletal disorders. AIMS: This study developed a direct observation method for the evaluation of dental student compliance with ergonomic posture protocol. SUBJECTS AND METHODS: The method is named compliance assessment of dental ergonomic posture requirements (CADEP). During the development of the method, 14 items were elaborated considering the theory of dental ergonomics. Each item should be classified as appropriate, partially appropriate, or inappropriate. After evaluation, all item values should be added, and the final score expressed as the percent of compliance with correct postures, with a score range of 0%–100%. STATISTICAL ANALYSIS USED: The reliability of CADEP was assessed through intra- and interobserver reproducibility. For the CADEP application, 73 senior year students from the undergraduate course in dentistry were evaluated. The intra- and interexaminer concordance was estimated using the intraclass correlation coefficient (ρ). A descriptive statistical analysis was performed. RESULTS: The reproducibility of evaluator 1 (ρ =0.90; confidence interval [CI] 95%: 0.83–0.94), evaluator 2 (ρ = 0.83; CI 95%: 0.70–0.90), the interexaminer in the first evaluation (ρ = 0.81; CI 95%:0.67–0.89), and in the second one (ρ = 0.76; CI 95%: 0.59–0.87) was classified as good. In the analysis of the compliance, it was verified that moderate compliance was the most prevalent among the evaluated students (65.6%, CI 95%: 60.3%–70.7%). CONCLUSIONS: CADEP was valid and reliable for the assessment of dentistry students’ compliance regarding ergonomic posture requirements. PMID:29693025

Choosing phenomenology as a guiding philosophy for nursing research.

PubMed

Matua, Gerald Amandu

2015-03-01

To provide an overview of important methodological considerations that nurse researchers need to adhere to when choosing phenomenology as a guiding philosophy and research method. Phenomenology is a major philosophy and research method in the humanities, human sciences and arts disciplines with a central goal of describing people's experiences. However, many nurse researchers continue to grapple with methodological issues related to their choice of phenomenological method. The author conducted online and manual searches of relevant research books and electronic databases. Using an integrative method, peer-reviewed research and discussion papers published between January 1990 and December 2011 and listed in the CINAHL, Science Direct, PubMed and Google Scholar databases were reviewed. In addition, textbooks that addressed research methodologies such as phenomenology were used. Although phenomenology is widely used today to broaden understanding of human phenomena relevant to nursing practice, nurse researchers often fail to adhere to acceptable scientific and phenomenological standards. Cognisant of these challenges, researchers are expected to indicate in their work the focus of their investigations, designs, and approaches to collecting and analysing data. They are also expected to present their findings in an evocative and expressive manner. Choosing phenomenology requires researchers to understand it as a philosophy, including basic assumptions and tenets of phenomenology as a research method. This awareness enables researchers, especially novices, to make important methodological decisions, particularly those necessary to indicate the study's scientific rigour and phenomenological validity. This paper adds to the discussion of phenomenology as a guiding philosophy for nursing research. It aims to guide new researchers on important methodological decisions they need to make to safeguard their study's scientific rigour and phenomenological validity.