Sample records for essential technical parameters

  1. Forward and backward uncertainty propagation: an oxidation ditch modelling example.

    PubMed

    Abusam, A; Keesman, K J; van Straten, G

    2003-01-01

    In the field of water technology, forward uncertainty propagation is frequently used, whereas backward uncertainty propagation is rarely used. In forward uncertainty analysis, one moves from a given (or assumed) parameter subspace towards the corresponding distribution of the output or objective function. However, in the backward uncertainty propagation, one moves in the reverse direction, from the distribution function towards the parameter subspace. Backward uncertainty propagation, which is a generalisation of parameter estimation error analysis, gives information essential for designing experimental or monitoring programmes, and for tighter bounding of parameter uncertainty intervals. The procedure of carrying out backward uncertainty propagation is illustrated in this technical note by working example for an oxidation ditch wastewater treatment plant. Results obtained have demonstrated that essential information can be achieved by carrying out backward uncertainty propagation analysis.

  2. [Technology of composting].

    PubMed

    Jäger, B

    1983-09-01

    The technology of composting must guarantee the material-chemical, biological and physical-technical reaction conditions essential for the rotting process. In this, the constituents of the input material and the C/N ratio play an important role. Maintaining optimum decomposition conditions is rendered difficult by the fact that the physical-technical reaction parameters partly exclude each other. These are: optimum humidity, adequate air/oxygen supply, large active surface, loose structure with sufficient decomposition volume. The processing of the raw refuse required to maintain the physical-technical reaction parameters can be carried out either by the conventional method of preliminary fragmentizing, sieving and mixing or else in conjunction with separating recycling in adapted systems. The latter procedure obviates some drawbacks which mainly result from the high expenditure required for preliminary fragmentation of the raw refuse. Moreover, presorting affords the possibility of reducing the heavy-metal content of the organic composing fraction and this approaches a solution to the noxa disposal problem which at present stands in the way of being accepted as an ecological waste disposal method.

  3. AI Tools for Foreign Language Training

    DTIC Science & Technology

    1989-07-01

    certain of the four basic language skills (reading, writing, speak- ing, hearing ) are supported in this envircnmnnt. hile this argument is valid, we... skills . While this paper will not review the psycholinguistic parameters pertaining to foreign language learning, we mention it as cne of the essential...Institute Technologies for Skill Acquisition and Retention Technical Area Zita M. Simutis, Chief Training Research Laboratory Jack H. HiJler, Director U.S

  4. Heterogeneity of the gut microbiome in mice: guidelines for optimizing experimental design.

    PubMed

    Laukens, Debby; Brinkman, Brigitta M; Raes, Jeroen; De Vos, Martine; Vandenabeele, Peter

    2016-01-01

    Targeted manipulation of the gut flora is increasingly being recognized as a means to improve human health. Yet, the temporal dynamics and intra- and interindividual heterogeneity of the microbiome represent experimental limitations, especially in human cross-sectional studies. Therefore, rodent models represent an invaluable tool to study the host-microbiota interface. Progress in technical and computational tools to investigate the composition and function of the microbiome has opened a new era of research and we gradually begin to understand the parameters that influence variation of host-associated microbial communities. To isolate true effects from confounding factors, it is essential to include such parameters in model intervention studies. Also, explicit journal instructions to include essential information on animal experiments are mandatory. The purpose of this review is to summarize the factors that influence microbiota composition in mice and to provide guidelines to improve the reproducibility of animal experiments. © FEMS 2015.

  5. Heterogeneity of the gut microbiome in mice: guidelines for optimizing experimental design

    PubMed Central

    Laukens, Debby; Brinkman, Brigitta M.; Raes, Jeroen; De Vos, Martine; Vandenabeele, Peter

    2015-01-01

    Targeted manipulation of the gut flora is increasingly being recognized as a means to improve human health. Yet, the temporal dynamics and intra- and interindividual heterogeneity of the microbiome represent experimental limitations, especially in human cross-sectional studies. Therefore, rodent models represent an invaluable tool to study the host–microbiota interface. Progress in technical and computational tools to investigate the composition and function of the microbiome has opened a new era of research and we gradually begin to understand the parameters that influence variation of host-associated microbial communities. To isolate true effects from confounding factors, it is essential to include such parameters in model intervention studies. Also, explicit journal instructions to include essential information on animal experiments are mandatory. The purpose of this review is to summarize the factors that influence microbiota composition in mice and to provide guidelines to improve the reproducibility of animal experiments. PMID:26323480

  6. Technical and Operational Feasibility Study on Humidity Control within the U.S. Air Force Aircraft Service Shelter. Aircraft Service Shelter is an Integral Part of the F-16 Maintenance Complex

    DTIC Science & Technology

    1987-02-27

    capacity, as calculated below, was added to the high tempierature, high humzidity load. The following new parameter values were used. K2 - sass flow...was added to the low temperature load. The following new parameter values were used. SM5 - mass flow rate for 4 hour "pull down" flow rate Q - 1,280...manufactured from the same teCnical data pdciage wi tn no essential differences and that capacity data for the A.R.E. heat pump wil. closely approximate the

  7. Cardiorespiratory Considerations in Dance: From Classes to Performances.

    PubMed

    Rodrigues-Krause, Josianne; Krause, Mauricio; Reischak-Oliveira, Álvaro

    2015-09-01

    When attempting to ascertain dancers' fitness levels, essential parameters, such as aerobic and anaerobic capacity, muscular power and strength, flexibility, and body composition, must be considered. Dance is characterized as an intermittent type of exercise, demanding energy from different metabolic pathways (aerobic and anaerobic, lactic or alactic). A dancer's maximum aerobic capacity (ranging from 37 to 57 ml·kg(-1)·min(-1)) is related to his or her dance style, gender, level of technical ability, and status in a dance company. However, dancers' cardiorespiratory requirements during dance classes (essentially designed for the development of technical skills) are significantly lower than during dance performances, indicating that there is a divergence between dance training and performance with regard to demands on dancers' physical fitness. It follows that supplementary fitness training is needed in order to optimize dancers' technical and artistic performance and to reduce the incidence of injury. Traditional aerobic and strength training have been proposed to cover dancers' lack of conditioning; however, it seems likely that high-intensity interval training would more properly meet the requirements of today's choreography. Therefore, with an approach that applies basic exercise physiology to dance characteristics, this review covers the following topics: 1. dance as physical exercise; 2. dancers' aerobic capacity; 3. cardiorespiratory demands of dance classes and performances; 4. supplementary fitness training for dancers; and 5. fitness testing and assessment for dancers.

  8. Integrated model of multiple kernel learning and differential evolution for EUR/USD trading.

    PubMed

    Deng, Shangkun; Sakurai, Akito

    2014-01-01

    Currency trading is an important area for individual investors, government policy decisions, and organization investments. In this study, we propose a hybrid approach referred to as MKL-DE, which combines multiple kernel learning (MKL) with differential evolution (DE) for trading a currency pair. MKL is used to learn a model that predicts changes in the target currency pair, whereas DE is used to generate the buy and sell signals for the target currency pair based on the relative strength index (RSI), while it is also combined with MKL as a trading signal. The new hybrid implementation is applied to EUR/USD trading, which is the most traded foreign exchange (FX) currency pair. MKL is essential for utilizing information from multiple information sources and DE is essential for formulating a trading rule based on a mixture of discrete structures and continuous parameters. Initially, the prediction model optimized by MKL predicts the returns based on a technical indicator called the moving average convergence and divergence. Next, a combined trading signal is optimized by DE using the inputs from the prediction model and technical indicator RSI obtained from multiple timeframes. The experimental results showed that trading using the prediction learned by MKL yielded consistent profits.

  9. Technical Considerations on Scanning and Image Analysis for Amyloid PET in Dementia.

    PubMed

    Akamatsu, Go; Ohnishi, Akihito; Aita, Kazuki; Ikari, Yasuhiko; Yamamoto, Yasuji; Senda, Michio

    2017-01-01

    Brain imaging techniques, such as computed tomography (CT), magnetic resonance imaging (MRI), single photon emission computed tomography (SPECT), and positron emission tomography (PET), can provide essential and objective information for the early and differential diagnosis of dementia. Amyloid PET is especially useful to evaluate the amyloid-β pathological process as a biomarker of Alzheimer's disease. This article reviews critical points about technical considerations on the scanning and image analysis methods for amyloid PET. Each amyloid PET agent has its own proper administration instructions and recommended uptake time, scan duration, and the method of image display and interpretation. In addition, we have introduced general scanning information, including subject positioning, reconstruction parameters, and quantitative and statistical image analysis. We believe that this article could make amyloid PET a more reliable tool in clinical study and practice.

  10. Sniper detection using infrared camera: technical possibilities and limitations

    NASA Astrophysics Data System (ADS)

    Kastek, M.; Dulski, R.; Trzaskawka, P.; Bieszczad, G.

    2010-04-01

    The paper discusses technical possibilities to build an effective system for sniper detection using infrared cameras. Descriptions of phenomena which make it possible to detect sniper activities in infrared spectra as well as analysis of physical limitations were performed. Cooled and uncooled detectors were considered. Three phases of sniper activities were taken into consideration: before, during and after the shot. On the basis of experimental data the parameters defining the target were determined which are essential in assessing the capability of infrared camera to detect sniper activity. A sniper body and muzzle flash were analyzed as targets. The simulation of detection ranges was done for the assumed scenario of sniper detection task. The infrared sniper detection system was discussed, capable of fulfilling the requirements. The discussion of the results of analysis and simulations was finally presented.

  11. A Practical Approach to Early Technical Education

    ERIC Educational Resources Information Center

    Chijioke, M. O.

    1973-01-01

    A minimum of technological awareness is essential to Black Africa in its efforts to modernize itself. The young grow up deprived of an environment where they are made to feel at home with gadgets and machines. Elementary technical training and orderly exposure to mathematics are essential to child's education. (EB)

  12. Automatic Keyword Extraction from Individual Documents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rose, Stuart J.; Engel, David W.; Cramer, Nicholas O.

    2010-05-03

    This paper introduces a novel and domain-independent method for automatically extracting keywords, as sequences of one or more words, from individual documents. We describe the method’s configuration parameters and algorithm, and present an evaluation on a benchmark corpus of technical abstracts. We also present a method for generating lists of stop words for specific corpora and domains, and evaluate its ability to improve keyword extraction on the benchmark corpus. Finally, we apply our method of automatic keyword extraction to a corpus of news articles and define metrics for characterizing the exclusivity, essentiality, and generality of extracted keywords within a corpus.

  13. Integrated Model of Multiple Kernel Learning and Differential Evolution for EUR/USD Trading

    PubMed Central

    Deng, Shangkun; Sakurai, Akito

    2014-01-01

    Currency trading is an important area for individual investors, government policy decisions, and organization investments. In this study, we propose a hybrid approach referred to as MKL-DE, which combines multiple kernel learning (MKL) with differential evolution (DE) for trading a currency pair. MKL is used to learn a model that predicts changes in the target currency pair, whereas DE is used to generate the buy and sell signals for the target currency pair based on the relative strength index (RSI), while it is also combined with MKL as a trading signal. The new hybrid implementation is applied to EUR/USD trading, which is the most traded foreign exchange (FX) currency pair. MKL is essential for utilizing information from multiple information sources and DE is essential for formulating a trading rule based on a mixture of discrete structures and continuous parameters. Initially, the prediction model optimized by MKL predicts the returns based on a technical indicator called the moving average convergence and divergence. Next, a combined trading signal is optimized by DE using the inputs from the prediction model and technical indicator RSI obtained from multiple timeframes. The experimental results showed that trading using the prediction learned by MKL yielded consistent profits. PMID:25097891

  14. Geostatistical characterisation of geothermal parameters for a thermal aquifer storage site in Germany

    NASA Astrophysics Data System (ADS)

    Rodrigo-Ilarri, J.; Li, T.; Grathwohl, P.; Blum, P.; Bayer, P.

    2009-04-01

    The design of geothermal systems such as aquifer thermal energy storage systems (ATES) must account for a comprehensive characterisation of all relevant parameters considered for the numerical design model. Hydraulic and thermal conductivities are the most relevant parameters and its distribution determines not only the technical design but also the economic viability of such systems. Hence, the knowledge of the spatial distribution of these parameters is essential for a successful design and operation of such systems. This work shows the first results obtained when applying geostatistical techniques to the characterisation of the Esseling Site in Germany. In this site a long-term thermal tracer test (> 1 year) was performed. On this open system the spatial temperature distribution inside the aquifer was observed over time in order to obtain as much information as possible that yield to a detailed characterisation both of the hydraulic and thermal relevant parameters. This poster shows the preliminary results obtained for the Esseling Site. It has been observed that the common homogeneous approach is not sufficient to explain the observations obtained from the TRT and that parameter heterogeneity must be taken into account.

  15. The Roles of Technical Communication Researchers in Design Scholarship

    ERIC Educational Resources Information Center

    Sánchez, Fernando

    2017-01-01

    Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

  16. Discussion of skill improvement in marine ecosystem dynamic models based on parameter optimization and skill assessment

    NASA Astrophysics Data System (ADS)

    Shen, Chengcheng; Shi, Honghua; Liu, Yongzhi; Li, Fen; Ding, Dewen

    2016-07-01

    Marine ecosystem dynamic models (MEDMs) are important tools for the simulation and prediction of marine ecosystems. This article summarizes the methods and strategies used for the improvement and assessment of MEDM skill, and it attempts to establish a technical framework to inspire further ideas concerning MEDM skill improvement. The skill of MEDMs can be improved by parameter optimization (PO), which is an important step in model calibration. An efficient approach to solve the problem of PO constrained by MEDMs is the global treatment of both sensitivity analysis and PO. Model validation is an essential step following PO, which validates the efficiency of model calibration by analyzing and estimating the goodness-of-fit of the optimized model. Additionally, by focusing on the degree of impact of various factors on model skill, model uncertainty analysis can supply model users with a quantitative assessment of model confidence. Research on MEDMs is ongoing; however, improvement in model skill still lacks global treatments and its assessment is not integrated. Thus, the predictive performance of MEDMs is not strong and model uncertainties lack quantitative descriptions, limiting their application. Therefore, a large number of case studies concerning model skill should be performed to promote the development of a scientific and normative technical framework for the improvement of MEDM skill.

  17. Continuous Odour Measurement with Chemosensor Systems

    NASA Astrophysics Data System (ADS)

    Boeker, Peter; Haas, T.; Diekmann, B.; Lammer, P. Schulze

    2009-05-01

    The continuous odour measurement is a challenging task for chemosensor systems. Firstly, a long term and stable measurement mode must be guaranteed in order to preserve the validity of the time consuming and expensive olfactometric calibration data. Secondly, a method is needed to deal with the incoming sensor data. The continuous online detection of signal patterns, the correlated gas emission and the assigned odour data is essential for the continuous odour measurement. Thirdly, a severe danger of over-fitting in the process of the odour calibration is present, because of the high measurement uncertainty of the olfactometry. In this contribution we present a technical solution for continuous measurements comprising of a hybrid QMB-sensor array and electrochemical cells. A set of software tools enables the efficient data processing and calibration and computes the calibration parameters. The internal software of the measurement systems microcontroller processes the calibration parameters online for the output of the desired odour information.

  18. Correction of a Technical Error in the Golf Swing: Error Amplification Versus Direct Instruction.

    PubMed

    Milanese, Chiara; Corte, Stefano; Salvetti, Luca; Cavedon, Valentina; Agostini, Tiziano

    2016-01-01

    Performance errors drive motor learning for many tasks. The authors' aim was to determine which of two strategies, method of amplification of error (MAE) or direct instruction (DI), would be more beneficial for error correction during a full golfing swing with a driver. Thirty-four golfers were randomly assigned to one of three training conditions (MAE, DI, and control). Participants were tested in a practice session in which each golfer performed 7 pretraining trials, 6 training-intervention trials, and 7 posttraining trials; and a retention test after 1 week. An optoeletronic motion capture system was used to measure the kinematic parameters of each golfer's performance. Results showed that MAE is an effective strategy for correcting the technical errors leading to a rapid improvement in performance. These findings could have practical implications for sport psychology and physical education because, while practice is obviously necessary for improving learning, the efficacy of the learning process is essential in enhancing learners' motivation and sport enjoyment.

  19. Deep Brain Stimulation for Essential Vocal Tremor: A Technical Report.

    PubMed

    Ho, Allen L; Choudhri, Omar; Sung, C Kwang; DiRenzo, Elizabeth E; Halpern, Casey H

    2015-03-01

    Essential vocal tremor (EVT) is the presence of a tremulous voice that is commonly associated with essential tremor. Patients with EVT often report a necessary increase in vocal effort that significantly worsens with stress and anxiety and can significantly impact quality of life despite optimal medical and behavioral treatment options. Deep brain stimulation (DBS) has been proposed as an effective therapy for vocal tremor, but very few studies exist in the literature that comprehensively evaluate the efficacy of DBS for specifically addressing EVT. We present a technical report on our multidisciplinary, comprehensive operative methodology for treatment of EVT with frameless, awake deep brain stimulation (DBS).

  20. Deep Brain Stimulation for Essential Vocal Tremor: A Technical Report

    PubMed Central

    Choudhri, Omar; Sung, C. Kwang; DiRenzo, Elizabeth E; Halpern, Casey H

    2015-01-01

    Essential vocal tremor (EVT) is the presence of a tremulous voice that is commonly associated with essential tremor. Patients with EVT often report a necessary increase in vocal effort that significantly worsens with stress and anxiety and can significantly impact quality of life despite optimal medical and behavioral treatment options. Deep brain stimulation (DBS) has been proposed as an effective therapy for vocal tremor, but very few studies exist in the literature that comprehensively evaluate the efficacy of DBS for specifically addressing EVT. We present a technical report on our multidisciplinary, comprehensive operative methodology for treatment of EVT with frameless, awake deep brain stimulation (DBS). PMID:26180680

  1. Physiological monitoring and control in hemodialysis: state of the art and outlook.

    PubMed

    Kraemer, Matthias

    2006-09-01

    Medical devices for monitoring and feedback control of physiological parameters of the dialysis patient were introduced in the early 1990s. They have a wide range of applications, aiming at increasing the safety and ensuring the efficiency of the treatment, and at an improved restoration of physiological conditions, leading to an overall reduction in morbidity and mortality. Such devices include sensors for the measurement of temperature, optical parameters and sound speed in blood, and electrical characteristics of the human body, and other parameters. Essential for the development of these devices is a detailed understanding of the pathophysiological background of a therapeutical problem. There is still a large potential to introduce new devices for further therapy improvement and automation. Also, the size of the hemodialysis market appears attractive; however, a new product has to meet several specific requirements in order to also become commercially successful. This review describes the therapeutic and technical principles of several available devices, reports on concepts for possible future devices, and presents a short overview on the market environment.

  2. Career Technical Education Pathways Initiative Annual Report

    ERIC Educational Resources Information Center

    California Community Colleges, Chancellor's Office, 2014

    2014-01-01

    California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (the Initiative) became law in 2005 with Senate Bills 70 and 1133 and provided more than $380 million over eight years to improve career technical education…

  3. The Annual Career and Technical Education High School Report, 2007

    ERIC Educational Resources Information Center

    Iowa Department of Education, 2007

    2007-01-01

    This report, the first "Annual Career and Technical Education High School Report" was created to serve as a rich resource for educators, school and college administrators, policymakers, and other citizens by providing essential summative data on career and technical education in Iowa at the high school level. Students increasingly need…

  4. Developing English Communication Expertise for Engineers in the Global Age

    NASA Astrophysics Data System (ADS)

    Ono, Yoshimasa A.; Morimura, Kumiko

    This paper discusses contents and results of a new graduate course “English for Engineers and Scientists” given at School of Engineering, The University of Tokyo. This course is a new attempt to develop English communication expertise for engineering graduate students: how to write technical papers and how to make technical presentations in English. For these purposes, differences in the writing styles and in the sentence structures of English and Japanese are stressed: conclusions come first in English versus conclusions come last in Japanese; the three-step style of introduction, body, and conclusion in English versus the four-step style of ki-sho-ten-ketsu in Japanese. In addition, proper styles of technical papers (rhetoric) and related grammatical points are discussed. Technical presentation course consists of four-week lecture and seven-week practice session. In the lecture, essential points of technical presentations in English are discussed in detail, and in the practice session students‧ presentation skills are improved through guidance and instructions given by native-speaker moderators. The class evaluation results show that most students have obtained necessary skills of technical presentation, indicating that the combined course of lecture and practice session is essential for training students to make better technical presentations in English.

  5. Influence of typical faults over the dynamic behavior of pantograph-catenary contact force in electric rail transport

    NASA Astrophysics Data System (ADS)

    Rusu-Anghel, S.; Ene, A.

    2017-05-01

    The quality of electric energy capture and also the equipment operational safety depend essentially of the technical state of the contact line (CL). The present method for determining the technical state of CL based on advance programming is no longer efficient, due to the faults which can occur into the not programmed areas. Therefore, they cannot be remediated. It is expected another management method for the repairing and maintenance of CL based on its real state which must be very well known. In this paper a new method for determining the faults in CL is described. It is based on the analysis of the variation of pantograph-CL contact force in dynamical regime. Using mathematical modelling and also experimental tests, it was established that each type of fault is able to generate ‘signatures’ into the contact force diagram. The identification of these signatures can be accomplished by an informatics system which will provide the fault location, its type and also in the future, the probable evolution of the CL technical state. The measuring of the contact force is realized in optical manner using a railway inspection trolley which has appropriate equipment. The analysis of the desired parameters can be accomplished in real time by a data acquisition system, based on dedicated software.

  6. Radio Continuum Surveys with Square Kilometre Array Pathfinders

    NASA Astrophysics Data System (ADS)

    Norris, Ray P.; Afonso, J.; Bacon, D.; Beck, Rainer; Bell, Martin; Beswick, R. J.; Best, Philip; Bhatnagar, Sanjay; Bonafede, Annalisa; Brunetti, Gianfranco; Budavári, Tamás; Cassano, Rossella; Condon, J. J.; Cress, Catherine; Dabbech, Arwa; Feain, I.; Fender, Rob; Ferrari, Chiara; Gaensler, B. M.; Giovannini, G.; Haverkorn, Marijke; Heald, George; Van der Heyden, Kurt; Hopkins, A. M.; Jarvis, M.; Johnston-Hollitt, Melanie; Kothes, Roland; Van Langevelde, Huib; Lazio, Joseph; Mao, Minnie Y.; Martínez-Sansigre, Alejo; Mary, David; Mcalpine, Kim; Middelberg, E.; Murphy, Eric; Padovani, P.; Paragi, Zsolt; Prandoni, I.; Raccanelli, A.; Rigby, Emma; Roseboom, I. G.; Röttgering, H.; Sabater, Jose; Salvato, Mara; Scaife, Anna M. M.; Schilizzi, Richard; Seymour, N.; Smith, Dan J. B.; Umana, Grazia; Zhao, G.-B.; Zinn, Peter-Christian

    2013-03-01

    In the lead-up to the Square Kilometre Array (SKA) project, several next-generation radio telescopes and upgrades are already being built around the world. These include APERTIF (The Netherlands), ASKAP (Australia), e-MERLIN (UK), VLA (USA), e-EVN (based in Europe), LOFAR (The Netherlands), MeerKAT (South Africa), and the Murchison Widefield Array. Each of these new instruments has different strengths, and coordination of surveys between them can help maximise the science from each of them. A radio continuum survey is being planned on each of them with the primary science objective of understanding the formation and evolution of galaxies over cosmic time, and the cosmological parameters and large-scale structures which drive it. In pursuit of this objective, the different teams are developing a variety of new techniques, and refining existing ones. To achieve these exciting scientific goals, many technical challenges must be addressed by the survey instruments. Given the limited resources of the global radio-astronomical community, it is essential that we pool our skills and knowledge. We do not have sufficient resources to enjoy the luxury of re-inventing wheels. We face significant challenges in calibration, imaging, source extraction and measurement, classification and cross-identification, redshift determination, stacking, and data-intensive research. As these instruments extend the observational parameters, we will face further unexpected challenges in calibration, imaging, and interpretation. If we are to realise the full scientific potential of these expensive instruments, it is essential that we devote enough resources and careful study to understanding the instrumental effects and how they will affect the data. We have established an SKA Radio Continuum Survey working group, whose prime role is to maximise science from these instruments by ensuring we share resources and expertise across the projects. Here we describe these projects, their science goals, and the technical challenges which are being addressed to maximise the science return.

  7. Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

    DTIC Science & Technology

    1975-12-01

    139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

  8. Technical writing in the radiologic technology curriculum.

    PubMed

    Bell, R

    1979-01-01

    Although courses in technical writing are no longer suggested in the Curriculum Guide for Programs in Radiologic Technology, the writer believes that writing is essential to the growth of the profession and development of the professional. Emphasis is placed on some of the benefits that accrue to students who are exposed to technical writing as part of their technology curriculum.

  9. Keep Your Small Network Sailing Safely in Dangerous Waters

    ERIC Educational Resources Information Center

    Semmelroth, Jim

    2006-01-01

    Asmall library's essential technical problem is that it has to chart a course through the technology shoals without a navigator on board. Small libraries in small towns often have a very low level of technical skill on staff. Furthermore, obtaining skilled technical support can frequently be pretty expensive. Even when one is available, a clever…

  10. WORKING WITH STUDENTS INSIDE AND OUTSIDE THE CLASSROOM IN ADULT BASIC EDUCATION PROGRAMS.

    ERIC Educational Resources Information Center

    BRAZZIEL, WILLIAM F.

    TECHNICAL EDUCATION OF THE ADULT HARD-CORE UNEMPLOYED OFTEN FAILS BECAUSE OF PERSONAL PROBLEMS AND BASIC EDUCATION AND CULTURAL LACKS. A BROAD CONCEPT OF EDUCATION IS ESSENTIAL TO PROGRAMS FOR DEVELOPMENT OF TECHNICAL SKILLS. A COLLEGE PROJECT DESIGNED TO MEET THESE REQUIREMENTS IS PRESENTED. A COMBINATION OF BASIC AND TECHNICAL EDUCATION WITH THE…

  11. Technical Manual for the Conceptual Learning and Development Assessment Series II: Cutting Tool. Technical Report No. 435. Reprinted December 1977.

    ERIC Educational Resources Information Center

    DiLuzio, Geneva J.; And Others

    This document accompanies Conceptual Learning and Development Assessment Series II: Cutting Tool, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data…

  12. Technical Manual for the Conceptual Learning and Development Assessment Series IV: Tree. Technical Report No. 437. Reprinted December 1977.

    ERIC Educational Resources Information Center

    DiLuzio, Geneva J.; And Others

    This document accompanies the Conceptual Learning and Development Assessment Series III: Tree, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data for…

  13. Technical Manual for the Conceptual Learning and Development Assessment Series II: Equilateral Triangle. Technical Report No. 434. Reprinted December 1977.

    ERIC Educational Resources Information Center

    DiLuzio, Geneva J.; And Others

    This document accompanies the Conceptual Learning and Development Assessment Series I: Equilateral Triangle, a test constructed to chart the conceptual developemnt of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and…

  14. Technical Manual for the Conceptual Learning and Development Assessment Series III: Noun. Technical Report No. 436. Reprinted December 1977.

    ERIC Educational Resources Information Center

    DiLuzio, Geneva J.; And Others

    This document accompanies the Conceptual Learning and Development Assessment Series IV: Noun, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data for…

  15. Control and Diagnostic Model of Brushless Dc Motor

    NASA Astrophysics Data System (ADS)

    Abramov, Ivan V.; Nikitin, Yury R.; Abramov, Andrei I.; Sosnovich, Ella V.; Božek, Pavol

    2014-09-01

    A simulation model of brushless DC motor (BLDC) control and diagnostics is considered. The model has been developed using a freeware complex "Modeling in technical devices". Faults and diagnostic parameters of BLDC are analyzed. A logicallinguistic diagnostic model of BLDC has been developed on basis of fuzzy logic. The calculated rules determine dependence of technical condition on diagnostic parameters, their trends and utilized lifetime of BLDC. Experimental results of BLDC technical condition diagnostics are discussed. It is shown that in the course of BLDC degradation the motor condition change depends on diagnostic parameter values

  16. 47 CFR 5.3 - Scope of service.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... type of operations: (a) Experimentations in scientific or technical radio research. (b... Government, or for export purposes. (d) Communications essential to a research project. (e) Technical demonstrations of equipment or techniques. (f) Field strength surveys. (g) Demonstration of equipment to...

  17. 47 CFR 5.3 - Scope of service.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... type of operations: (a) Experimentations in scientific or technical radio research. (b... Government, or for export purposes. (d) Communications essential to a research project. (e) Technical demonstrations of equipment or techniques. (f) Field strength surveys. (g) Demonstration of equipment to...

  18. Technical aspects of MRI signal change quantification after gadolinium-based contrast agents' administration.

    PubMed

    Ramalho, Joana; Ramalho, Miguel; AlObaidy, Mamdoh; Semelka, Richard C

    2016-12-01

    Over the last 2years several studies have been published regarding gadolinium deposition in brain structures in patients with normal renal function after repeated administrations of gadolinium-based contrast agents (GBCAs). Most of the publications are magnetic resonance imaging (MRI) based retrospective studies, where gadolinium deposition may be indirectly measured by evaluating changes in T1 signal intensity (SI) in brain tissue, particularly in the dentate nucleus (DN) and/or globus pallidi (GP). The direct correlation between T1 signal changes and gadolinium deposition was validated by human pathology studies. However, the variability of the MR equipment and parameters used across different publications, along with the inherent limitations of MRI to assess gadolinium in human tissues should be acknowledged when interpreting those studies. Nevertheless, MRI studies remain essential regarding gadolinium bio-distribution knowledge. The aim of this paper is to overview current knowledge of technical aspects of T1 signal intensity evaluation by MRI and describe confounding factors, with the intention to achieve higher accuracy and maximize reproducibility. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Terraforming the Moon: a Viable Step in the Colonization of the Solar System?

    NASA Astrophysics Data System (ADS)

    Renn, H. W.

    2002-01-01

    One potential option for the colonization of other celestial bodies is Terraforming. The latter involves, as a first step, the creation of a breathable, artificial atmosphere. While terraforming other planets, especially Mars, has been under discussion for several decades, applying the same concept to Earth's closest neighbor, namely the Moon, plays virtually no role in existing plans for space colonization. This paper investigates the technical and economical feasibility of supplying the Moon with an artificial atmosphere. Based on existing concepts for life support systems, essential requirements for an artificial Lunar atmosphere are defined. Various alternatives for the atmospheric composition are investigated and the parameters of a preferred `reference atmosphere' are described in detail. In order to assess the latter's habitability, particularly with respect to wind speeds and temperature cycles, the Moon's wind system and temperature field are analyzed by using a customized climate simulation model. Aspects of technical feasibility are evaluated and major obstacles are identified. Finally, various assessment criteria with particular respect to economical and ethical considerations are discussed and preliminary conclusions are presented.

  20. Process and assembly plans for low cost commercial fuselage structure

    NASA Technical Reports Server (NTRS)

    Willden, Kurtis; Metschan, Stephen; Starkey, Val

    1991-01-01

    Cost and weight reduction for a composite structure is a result of selecting design concepts that can be built using efficient low cost manufacturing and assembly processes. Since design and manufacturing are inherently cost dependent, concurrent engineering in the form of a Design-Build Team (DBT) is essential for low cost designs. Detailed cost analysis from DBT designs and hardware verification must be performed to identify the cost drivers and relationships between design and manufacturing processes. Results from the global evaluation are used to quantitatively rank design, identify cost centers for higher ranking design concepts, define and prioritize a list of technical/economic issues and barriers, and identify parameters that control concept response. These results are then used for final design optimization.

  1. Chemical composition and biological activity of the essential oil of rhizome of Zingiber zerumbet (L.) smith

    USDA-ARS?s Scientific Manuscript database

    Technical Abstract: The aim was designed to study the biological activity and chemical composition of essential oil of Zingiber zerumbet (L.) Smith. The essential oil extracted from the rhizome of the plant was analysed by gas chromatography-mass spectroscopy and its major components amounting t...

  2. Essentials of Career Interest Assessment. Essentials of Psychological Assessment Series.

    ERIC Educational Resources Information Center

    Prince, Jeffrey P.; Heiser, Lisa J.

    This book is a quick reference source to guide the career professional through the essentials of using the most popular career interest tools. It summarizes important technical aspects of each inventory, and offers step-by-step guidance in the interpretation and use of the various inventories. The chapters are: (1) "Overview"; (2)…

  3. High-Fidelity 3D-Nanoprinting via Focused Electron Beams: Growth Fundamentals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Winkler, Robert; Lewis, Brett B.; Fowlkes, Jason Davidson

    While 3D-printing is currently experiencing significant growth and having a significant impact on science and technology, the expansion into the nanoworld is still a highly challenging task. Among the increasing number of approaches, focused electron-beam-induced deposition (FEBID) was recently demonstrated to be a viable candidate toward a generic direct-write fabrication technology with spatial nanometer accuracy for complex shaped 3D-nanoarchitectures. In this comprehensive study, we explore the parameter space for 3D-FEBID and investigate the implications of individual and interdependent parameters on freestanding nanosegments, which act as a fundamental building block for complex 3D-structures. In particular, the study provides new basic insightsmore » such as precursor transport limitations and angle dependent growth rates, both essential for high-fidelity fabrication. In conclusion, complemented by practical aspects, we provide both basic insights in 3D-growth dynamics and technical guidance for specific process adaption to enable predictable and reliable direct-write synthesis of freestanding 3D-nanoarchitectures.« less

  4. High-Fidelity 3D-Nanoprinting via Focused Electron Beams: Growth Fundamentals

    DOE PAGES

    Winkler, Robert; Lewis, Brett B.; Fowlkes, Jason Davidson; ...

    2018-02-14

    While 3D-printing is currently experiencing significant growth and having a significant impact on science and technology, the expansion into the nanoworld is still a highly challenging task. Among the increasing number of approaches, focused electron-beam-induced deposition (FEBID) was recently demonstrated to be a viable candidate toward a generic direct-write fabrication technology with spatial nanometer accuracy for complex shaped 3D-nanoarchitectures. In this comprehensive study, we explore the parameter space for 3D-FEBID and investigate the implications of individual and interdependent parameters on freestanding nanosegments, which act as a fundamental building block for complex 3D-structures. In particular, the study provides new basic insightsmore » such as precursor transport limitations and angle dependent growth rates, both essential for high-fidelity fabrication. In conclusion, complemented by practical aspects, we provide both basic insights in 3D-growth dynamics and technical guidance for specific process adaption to enable predictable and reliable direct-write synthesis of freestanding 3D-nanoarchitectures.« less

  5. A Service Learning Structural Engineering Capstone Course and the Assessment of Technical and Non-Technical Objectives

    ERIC Educational Resources Information Center

    Dinehart, David W.; Gross, Shawn P.

    2010-01-01

    The primary role of a civil engineer is to serve the community; thus, it is essential that students understand the impact of engineering projects on, and the context of engineering projects within, society. One goal of an engineering capstone design course should be to mesh the technical knowledge of the discipline with an encompassing engineering…

  6. NASA SCIENTIFIC AND TECHNICAL INFORMATION (STI) PROGRAM PLAN

    EPA Science Inventory

    NASA's scientific and technical information (STI) is an essential product of research, facilitates technology transfer, and enhances the competitive edge of U.S. companies and educational institutions. NASA's STI is an integral part of NASA's information transfer and is critical...

  7. An applied methodology for assessment of the sustainability of biomass district heating systems

    NASA Astrophysics Data System (ADS)

    Vallios, Ioannis; Tsoutsos, Theocharis; Papadakis, George

    2016-03-01

    In order to maximise the share of biomass in the energy supplying system, the designers should adopt the appropriate changes to the traditional systems and become more familiar with the design details of the biomass heating systems. The aim of this study is to present the development of methodology and its associated implementation in software that is useful for the design of biomass thermal conversion systems linked with district heating (DH) systems, taking into consideration the types of building structures and urban settlement layout around the plant. The methodology is based on a completely parametric logic, providing an impact assessment of variations in one or more technical and/or economic parameters and thus, facilitating a quick conclusion on the viability of this particular energy system. The essential energy parameters are presented and discussed for the design of biomass power and heat production system which are in connection with DH network, as well as for its environmental and economic evaluation (i.e. selectivity and viability of the relevant investment). Emphasis has been placed upon the technical parameters of biomass logistics, energy system's design, the economic details of the selected technology (integrated cogeneration combined cycle or direct combustion boiler), the DH network and peripheral equipment (thermal substations) and the greenhouse gas emissions. The purpose of this implementation is the assessment of the pertinent investment financial viability taking into account the available biomass feedstock, the economical and market conditions, and the capital/operating costs. As long as biomass resources (forest wood and cultivation products) are available and close to the settlement, disposal and transportation costs of biomass, remain low assuring the sustainability of such energy systems.

  8. 47 CFR 5.3 - Scope of service.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... conduct the following type of operations: (a) Experimentations in scientific or technical radio research... purposes. (c) Communications essential to a research project. (d) Technical demonstrations of equipment or techniques. (e) Field strength surveys by persons not eligible for authorization in any other service. (f...

  9. 47 CFR 5.3 - Scope of service.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... conduct the following type of operations: (a) Experimentations in scientific or technical radio research... purposes. (c) Communications essential to a research project. (d) Technical demonstrations of equipment or techniques. (e) Field strength surveys by persons not eligible for authorization in any other service. (f...

  10. 47 CFR 5.3 - Scope of service.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... conduct the following type of operations: (a) Experimentations in scientific or technical radio research... purposes. (c) Communications essential to a research project. (d) Technical demonstrations of equipment or techniques. (e) Field strength surveys by persons not eligible for authorization in any other service. (f...

  11. Safety Education--An Essential Element of Technical Training

    ERIC Educational Resources Information Center

    Glazener, Everett R.; Comstock, Thomas W.

    1978-01-01

    After tracing the background of the safety movement, provisions of recent safety legislation, and the ecological and environmental impact of industrial processes, the author stresses the need for safety education in technical education programs to prepare future employees for industrial safety requirements. (MF)

  12. A Universe without Weak Interactions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harnik, Roni; Kribs, Graham D.; Perez, Gilad

    2006-04-07

    A universe without weak interactions is constructed that undergoes big-bang nucleosynthesis, matter domination, structure formation, and star formation. The stars in this universe are able to burn for billions of years, synthesize elements up to iron, and undergo supernova explosions, dispersing heavy elements into the interstellar medium. These definitive claims are supported by a detailed analysis where this hypothetical ''Weakless Universe'' is matched to our Universe by simultaneously adjusting Standard Model and cosmological parameters. For instance, chemistry and nuclear physics are essentially unchanged. The apparent habitability of the Weakless Universe suggests that the anthropic principle does not determine the scalemore » of electroweak breaking, or even require that it be smaller than the Planck scale, so long as technically natural parameters may be suitably adjusted. Whether the multi-parameter adjustment is realized or probable is dependent on the ultraviolet completion, such as the string landscape. Considering a similar analysis for the cosmological constant, however, we argue that no adjustments of other parameters are able to allow the cosmological constant to raise up even remotely close to the Planck scale while obtaining macroscopic structure. The fine-tuning problems associated with the electroweak breaking scale and the cosmological constant therefore appear to be qualitatively different from the perspective of obtaining a habitable universe.« less

  13. The Taguchi Method Application to Improve the Quality of a Sustainable Process

    NASA Astrophysics Data System (ADS)

    Titu, A. M.; Sandu, A. V.; Pop, A. B.; Titu, S.; Ciungu, T. C.

    2018-06-01

    Taguchi’s method has always been a method used to improve the quality of the analyzed processes and products. This research shows an unusual situation, namely the modeling of some parameters, considered technical parameters, in a process that is wanted to be durable by improving the quality process and by ensuring quality using an experimental research method. Modern experimental techniques can be applied in any field and this study reflects the benefits of interacting between the agriculture sustainability principles and the Taguchi’s Method application. The experimental method used in this practical study consists of combining engineering techniques with experimental statistical modeling to achieve rapid improvement of quality costs, in fact seeking optimization at the level of existing processes and the main technical parameters. The paper is actually a purely technical research that promotes a technical experiment using the Taguchi method, considered to be an effective method since it allows for rapid achievement of 70 to 90% of the desired optimization of the technical parameters. The missing 10 to 30 percent can be obtained with one or two complementary experiments, limited to 2 to 4 technical parameters that are considered to be the most influential. Applying the Taguchi’s Method in the technique and not only, allowed the simultaneous study in the same experiment of the influence factors considered to be the most important in different combinations and, at the same time, determining each factor contribution.

  14. Analysis and Implementation of an Electronic Laboratory Notebook in a Biomedical Research Institute

    PubMed Central

    Dujardin, Gwendal; Cabrera-Andrade, Alejandro; Paz-y-Miño, César; Indacochea, Alberto; Inglés-Ferrándiz, Marta; Nadimpalli, Hima Priyanka; Collu, Nicola; Dublanche, Yann; De Mingo, Ismael; Camargo, David

    2016-01-01

    Electronic laboratory notebooks (ELNs) will probably replace paper laboratory notebooks (PLNs) in academic research due to their advantages in data recording, sharing and security. Despite several reports describing technical characteristics of ELNs and their advantages over PLNs, no study has directly tested ELN performance among researchers. In addition, the usage of tablet-based devices or wearable technology as ELN complements has never been explored in the field. To implement an ELN in our biomedical research institute, here we first present a technical comparison of six ELNs using 42 parameters. Based on this, we chose two ELNs, which were tested by 28 scientists for a 3-month period and by 80 students via hands-on practical exercises. Second, we provide two survey-based studies aimed to compare these two ELNs (PerkinElmer Elements and Microsoft OneNote) and to analyze the use of tablet-based devices. We finally explore the advantages of using wearable technology as ELNs tools. Among the ELNs tested, we found that OneNote presents almost all parameters evaluated (39/42) and both surveyed groups preferred OneNote as an ELN solution. In addition, 80% of the surveyed scientists reported that tablet-based devices improved the use of ELNs in different respects. We also describe the advantages of using OneNote application for Apple Watch as an ELN wearable complement. This work defines essential features of ELNs that could be used to improve ELN implementation and software development. PMID:27479083

  15. Analysis and Implementation of an Electronic Laboratory Notebook in a Biomedical Research Institute.

    PubMed

    Guerrero, Santiago; Dujardin, Gwendal; Cabrera-Andrade, Alejandro; Paz-Y-Miño, César; Indacochea, Alberto; Inglés-Ferrándiz, Marta; Nadimpalli, Hima Priyanka; Collu, Nicola; Dublanche, Yann; De Mingo, Ismael; Camargo, David

    2016-01-01

    Electronic laboratory notebooks (ELNs) will probably replace paper laboratory notebooks (PLNs) in academic research due to their advantages in data recording, sharing and security. Despite several reports describing technical characteristics of ELNs and their advantages over PLNs, no study has directly tested ELN performance among researchers. In addition, the usage of tablet-based devices or wearable technology as ELN complements has never been explored in the field. To implement an ELN in our biomedical research institute, here we first present a technical comparison of six ELNs using 42 parameters. Based on this, we chose two ELNs, which were tested by 28 scientists for a 3-month period and by 80 students via hands-on practical exercises. Second, we provide two survey-based studies aimed to compare these two ELNs (PerkinElmer Elements and Microsoft OneNote) and to analyze the use of tablet-based devices. We finally explore the advantages of using wearable technology as ELNs tools. Among the ELNs tested, we found that OneNote presents almost all parameters evaluated (39/42) and both surveyed groups preferred OneNote as an ELN solution. In addition, 80% of the surveyed scientists reported that tablet-based devices improved the use of ELNs in different respects. We also describe the advantages of using OneNote application for Apple Watch as an ELN wearable complement. This work defines essential features of ELNs that could be used to improve ELN implementation and software development.

  16. Technical parameters for specifying imagery requirements

    NASA Technical Reports Server (NTRS)

    Coan, Paul P.; Dunnette, Sheri J.

    1994-01-01

    Providing visual information acquired from remote events to various operators, researchers, and practitioners has become progressively more important as the application of special skills in alien or hazardous situations increases. To provide an understanding of the technical parameters required to specify imagery, we have identified, defined, and discussed seven salient characteristics of images: spatial resolution, linearity, luminance resolution, spectral discrimination, temporal discrimination, edge definition, and signal-to-noise ratio. We then describe a generalizing imaging system and identified how various parts of the system affect the image data. To emphasize the different applications of imagery, we have constrasted the common television system with the significant parameters of a televisual imaging system for technical applications. Finally, we have established a method by which the required visual information can be specified by describing certain technical parameters which are directly related to the information content of the imagery. This method requires the user to complete a form listing all pertinent data requirements for the imagery.

  17. Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

    ERIC Educational Resources Information Center

    Partnership for 21st Century Skills, 2010

    2010-01-01

    This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

  18. Career Technical Education Pathways Initiative

    ERIC Educational Resources Information Center

    California Community Colleges, Chancellor's Office, 2013

    2013-01-01

    California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (referred to as the Initiative in this report), which became law in 2005, brings together community colleges, K-12 school districts, employers, organized…

  19. 47 CFR 80.481 - Alternative technical parameters for AMTS transmitters.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Alternative technical parameters for AMTS transmitters. 80.481 Section 80.481 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Public Coast Stations Automated Systems § 80.481...

  20. Towards an In-Beam Measurement of the Neutron Lifetime to 1 Second

    NASA Astrophysics Data System (ADS)

    Mulholland, Jonathan

    2014-03-01

    A precise value for the neutron lifetime is required for consistency tests of the Standard Model and is an essential parameter in the theory of Big Bang Nucleosynthesis. A new measurement of the neutron lifetime using the in-beam method is planned at the National Institute of Standards and Technology Center for Neutron Research. The systematic effects associated with the in-beam method are markedly different than those found in storage experiments utilizing ultracold neutrons. Experimental improvements, specifically recent advances in the determination of absolute neutron fluence, should permit an overall uncertainty of 1 second on the neutron lifetime. The dependence of the primordial mass fraction on the neutron lifetime, technical improvements of the in-beam technique, and the path toward improving the precision of the new measurement will be discussed.

  1. Method of Individual Forecasting of Technical State of Logging Machines

    NASA Astrophysics Data System (ADS)

    Kozlov, V. G.; Gulevsky, V. A.; Skrypnikov, A. V.; Logoyda, V. S.; Menzhulova, A. S.

    2018-03-01

    Development of the model that evaluates the possibility of failure requires the knowledge of changes’ regularities of technical condition parameters of the machines in use. To study the regularities, the need to develop stochastic models that take into account physical essence of the processes of destruction of structural elements of the machines, the technology of their production, degradation and the stochastic properties of the parameters of the technical state and the conditions and modes of operation arose.

  2. [Definition of the Diagnosis Osteomyelitis-Osteomyelitis Diagnosis Score (ODS)].

    PubMed

    Schmidt, H G K; Tiemann, A H; Braunschweig, R; Diefenbeck, M; Bühler, M; Abitzsch, D; Haustedt, N; Walter, G; Schoop, R; Heppert, V; Hofmann, G O; Glombitza, M; Grimme, C; Gerlach, U-J; Flesch, I

    2011-08-01

    The disease "osteomyelitis" is characterised by different symptoms and parameters. Decisive roles in the development of the disease are played by the causative bacteria, the route of infection and the individual defense mechanisms of the host. The diagnosis is based on different symptoms and findings from the clinical history, clinical symptoms, laboratory results, diagnostic imaging, microbiological and histopathological analyses. While different osteomyelitis classifications have been published, there is to the best of our knowledge no score that gives information how sure the diagnosis "osteomyelitis" is in general. For any scientific study of a disease a valid definition is essential. We have developed a special osteomyelitis diagnosis score for the reliable classification of clinical, laboratory and technical findings. The score is based on five diagnostic procedures: 1) clinical history and risk factors, 2) clinical examination and laboratory results, 3) diagnostic imaging (ultrasound, radiology, CT, MRI, nuclear medicine and hybrid methods), 4) microbiology, and 5) histopathology. Each diagnostic procedure is related to many individual findings, which are weighted by a score system, in order to achieve a relevant value for each assessment. If the sum of the five diagnostic criteria is 18 or more points, the diagnosis of osteomyelitis can be viewed as "safe" (diagnosis class A). Between 8-17 points the diagnosis is "probable" (diagnosis class B). Less than 8 points means that the diagnosis is "possible, but unlikely" (class C diagnosis). Since each parameter can score six points at a maximum, a reliable diagnosis can only be achieved if at least 3 parameters are scored with 6 points. The osteomyelitis diagnosis score should help to avoid the false description of a clinical presentation as "osteomyelitis". A safe diagnosis is essential for the aetiology, treatment and outcome studies of osteomyelitis. © Georg Thieme Verlag KG Stuttgart · New York.

  3. Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players

    PubMed Central

    Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

    2016-01-01

    Background There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players’ technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. Objectives The aim of this study was to examine temporal changes in technical and physical performances during a small-sided game (SSG) in elite soccer players. Methods Sixty elite youth players (age 14.8 ± 0.2 yr; stature 177 ± 5 cm; body mass 66.2 ± 4.7 kg) completed a 5 v 5 SSG using two repetitions of 8 minutes interspersed by 3 minutes of passive recovery. To evaluate temporal changes in performance, the data were analysed across 4 minutes quarters. Physical performance parameters included the total distance covered (TDC), the frequency of sprints (>18 km•h-1), accelerations and decelerations (> 2.0 m•s-2 and - 2.0 m•s-2), metabolic power (W•kg-1), training impulse (TRIMP), TDC: TRIMP, number of impacts, and body load. Technical performance parameters included goal attempts, total number of tackles, tackles and interceptions, total number of passes, and passes effectiveness. Results All physical performance parameters decreased from the first to the last quarter with notable declines in TDC, metabolic power and the frequency of sprints, accelerations and decelerations (P < 0.05; moderate to very large ES: 1.08 - 3.30). However, technical performance parameters did not vary across quarters (P > 0.05; trivial ES for 1st v 4th quarters: 0.15 - 0.33). Conclusions The data demonstrate that technical performance is maintained despite substantial declines in physical performance during a SSG in elite youth players. This finding may have implications for designing SSG’s for elite youth players to ensure physical, technical and tactical capabilities are optimized. Modifications in player number, pitch dimensions, rules, coach encouragement, for instance, should be included taking into account the main aim of a given session and then focused on overloading physical or technical elements. PMID:28144411

  4. Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players.

    PubMed

    Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

    2016-12-01

    There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players' technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. The aim of this study was to examine temporal changes in technical and physical performances during a small-sided game (SSG) in elite soccer players. Sixty elite youth players (age 14.8 ± 0.2 yr; stature 177 ± 5 cm; body mass 66.2 ± 4.7 kg) completed a 5 v 5 SSG using two repetitions of 8 minutes interspersed by 3 minutes of passive recovery. To evaluate temporal changes in performance, the data were analysed across 4 minutes quarters. Physical performance parameters included the total distance covered (TDC), the frequency of sprints (>18 km•h -1 ), accelerations and decelerations (> 2.0 m•s -2 and - 2.0 m•s -2 ), metabolic power (W•kg -1 ), training impulse (TRIMP), TDC: TRIMP, number of impacts, and body load. Technical performance parameters included goal attempts, total number of tackles, tackles and interceptions, total number of passes, and passes effectiveness. All physical performance parameters decreased from the first to the last quarter with notable declines in TDC, metabolic power and the frequency of sprints, accelerations and decelerations (P < 0.05; moderate to very large ES: 1.08 - 3.30). However, technical performance parameters did not vary across quarters (P > 0.05; trivial ES for 1st v 4th quarters: 0.15 - 0.33). The data demonstrate that technical performance is maintained despite substantial declines in physical performance during a SSG in elite youth players. This finding may have implications for designing SSG's for elite youth players to ensure physical, technical and tactical capabilities are optimized. Modifications in player number, pitch dimensions, rules, coach encouragement, for instance, should be included taking into account the main aim of a given session and then focused on overloading physical or technical elements.

  5. Method for Household Refrigerators Efficiency Increasing

    NASA Astrophysics Data System (ADS)

    Lebedev, V. V.; Sumzina, L. V.; Maksimov, A. V.

    2017-11-01

    The relevance of working processes parameters optimization in air conditioning systems is proved in the work. The research is performed with the use of the simulation modeling method. The parameters optimization criteria are considered, the analysis of target functions is given while the key factors of technical and economic optimization are considered in the article. The search for the optimal solution at multi-purpose optimization of the system is made by finding out the minimum of the dual-target vector created by the Pareto method of linear and weight compromises from target functions of the total capital costs and total operating costs. The tasks are solved in the MathCAD environment. The research results show that the values of technical and economic parameters of air conditioning systems in the areas relating to the optimum solutions’ areas manifest considerable deviations from the minimum values. At the same time, the tendencies for significant growth in deviations take place at removal of technical parameters from the optimal values of both the capital investments and operating costs. The production and operation of conditioners with the parameters which are considerably deviating from the optimal values will lead to the increase of material and power costs. The research allows one to establish the borders of the area of the optimal values for technical and economic parameters at air conditioning systems’ design.

  6. Electronics. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; and overview of the electronics field; an list acknowledging the professionals who helped develop the competency list; and the comprehensive listing of the professional or occupational competencies deemed essential for…

  7. Sociotechnical Walkthrough: A Means for Knowledge Integration

    ERIC Educational Resources Information Center

    Herrmann, Thomas; Loser, Kai-Uwe; Jahnke, Isa

    2007-01-01

    Purpose: The purpose of this research is to show that for the successful development of socio-technical systems it is essential that various stakeholders are able to integrate their different knowledge and perspectives. A method that supports knowledge integration in the course of introduction and development of socio-technical systems is the…

  8. Ohio Agricultural Business and Production Systems. Technical Competency Profile (TCP).

    ERIC Educational Resources Information Center

    Ray, Gayl M.; Kershaw, Isaac; Mokma, Arnie

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in agricultural business and production systems. Following an introduction, the Ohio College Tech Prep standards and program, and relevant definitions are described. Next are the technical competency profiles for these…

  9. Drafting. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the drafting industry; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for graduates…

  10. Dental Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the dental assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

  11. Carpentry. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2001 Revision.

    ERIC Educational Resources Information Center

    Ohio State Board of Education, Columbus.

    This Ohio Integrated Technical and Academic Competency (ITAC) profile provides the professional or occupational competencies deemed essential for a graduate to perform proficiently in carpentry when he or she graduates from the specialization work force development program in industrial and engineering systems. The profile includes competency…

  12. Nurse Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the nurse assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

  13. Development of Cooperative Planning for Technical-Vocational Programs.

    ERIC Educational Resources Information Center

    Cisco Junior Coll., TX.

    During the past decade vocational-technical education in Texas has grown so rapidly that now attention must be given to enrollments, employment projections, and more efficient utilization of the limited resources available. Cisco and Ranger Junior Colleges serve essentially the same population and a plan for close cooperation and coordination is…

  14. Graphic Communications. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the graphic communications field; a list acknowledging professionals who helped develop the competency list; and a comprehensive list of the professional or occupational competencies deemed essential for…

  15. ORD-State Cooperation is Essential to Help States Address Contemporary Environmental Public Health Challenges

    EPA Science Inventory

    Dr. Cascio’s presentation “ORD-State Cooperation is Essential to Help States Address Contemporary Environmental Public Health Challenges” at ORD’s State Coordination Team Meeting will highlight the role that ORD science and technical expertise in helping t...

  16. 36 CFR 68.3 - Standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... consideration the economic and technical feasibility of each project. (a) Preservation. (1) A property will be... related new construction will be undertaken in such a manner that, if removed in the future, the essential... such reconstruction is essential to the public understanding of the property. (2) Reconstruction of a...

  17. Energy Systems Integration News | Energy Systems Integration Facility |

    Science.gov Websites

    answer that question by examining the technical, infrastructure, economic, and policy barriers to greater intra-hour, inter-hour, seasonal, and inter-annual variability of solar resources-essential information powerful tool that provides essential information to policymakers, financiers, project developers, and

  18. Electro-optical system for gunshot detection: analysis, concept, and performance

    NASA Astrophysics Data System (ADS)

    Kastek, M.; Dulski, R.; Madura, H.; Trzaskawka, P.; Bieszczad, G.; Sosnowski, T.

    2011-08-01

    The paper discusses technical possibilities to build an effective electro-optical sensor unit for sniper detection using infrared cameras. This unit, comprising of thermal and daylight cameras, can operate as a standalone device but its primary application is a multi-sensor sniper and shot detection system. At first, the analysis was presented of three distinguished phases of sniper activity: before, during and after the shot. On the basis of experimental data the parameters defining the relevant sniper signatures were determined which are essential in assessing the capability of infrared camera to detect sniper activity. A sniper body and muzzle flash were analyzed as targets and the descriptions of phenomena which make it possible to detect sniper activities in infrared spectra as well as analysis of physical limitations were performed. The analyzed infrared systems were simulated using NVTherm software. The calculations for several cameras, equipped with different lenses and detector types were performed. The simulation of detection ranges was performed for the selected scenarios of sniper detection tasks. After the analysis of simulation results, the technical specifications of infrared sniper detection system were discussed, required to provide assumed detection range. Finally the infrared camera setup was proposed which can detected sniper from 1000 meters range.

  19. Interagency Collaboration for Young Adults with Deaf-Blindness: Toward a Common Transition Goal.

    ERIC Educational Resources Information Center

    Everson, Jane M.; And Others

    This monograph is a compilation of the knowledge gained by the Technical Assistance Center (TAC) of the Helen Keller National Center, from training and technical assistance activities conducted with state interagency teams serving youth and young adults with deaf-blindness. The book views interagency collaboration as essential in achieving…

  20. Adults with Cognitive Disabilities in the Technical Sector

    ERIC Educational Resources Information Center

    Gronsky, Stacy A.

    2015-01-01

    Given the number of jobs created in the technical sector (Casserly, 2012), it is essential to identify how adults with cognitive disabilities can be best supported in professional environments and evolving sectors. Some career paths and jobs can be more understanding of learning disabilities than others (Nicholas, 2011). This is dependent not only…

  1. Administrative Office Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document presents the Ohio Integrated Technical and Academic Competency (ITAC) profile for administrative office technology, which is a comprehensive listing of 58 occupational skill competencies deemed essential for Ohio graduates of programs in office technology. The document begins with an introduction to the ITAC system, a list of…

  2. Technical Education as a Tool for Ensuring Sustainable Development: A Case of India

    ERIC Educational Resources Information Center

    Sharma, Gagan Deep; Uppal, Raminder Singh; Mahendru, Mandeep

    2016-01-01

    This paper notes that education needs to essentially lead to sustainable development serving two-fold purpose--eradicating the problems of unemployment and poverty; and ensuring equitable distribution of wealth while ensuring the right understanding leading to a peaceful, prosperous and developed world. In its current state, technical education…

  3. Work Force Education: Beyond Technical Skills. Trends and Issues Alert No. 1.

    ERIC Educational Resources Information Center

    Imel, Susan

    This brief suggests that during the past 2 decades, the skills needed to succeed in the workplace have changed significantly. Technical skills remain important, but, increasingly, employers recognize another category of skills crucial to a worker's ability to work "smarter, not harder." These "soft,""core,""nontechnical,""essential,""generic," and…

  4. Designing and Developing Technical Curriculum: Finding the Right Subject Matter Expert

    ERIC Educational Resources Information Center

    Mattoon, Joseph Sterling

    2005-01-01

    Subject matter experts play an essential role in technical curriculum development by providing accurate and up-to-date information that matches education, training, and workforce needs. The Subject Matter Expert (SME) COMlist is proposed as a tool that enables instructional developers to evaluate an SME's capability and suitability to support…

  5. Practical Nursing. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the field of practical nursing; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

  6. Book Review :The Essential Guide to Rocky Mountain Mushrooms by Habitat

    USDA-ARS?s Scientific Manuscript database

    A mushroom guide book, 'The Essential Guide to Rocky Mountain Mushrooms by Habitat' by Cathy L. Cripps, Vera S. Evenson, and Michael Kou (University of Illinois Press, 260 pages), is reviewed in non-technical fashion from the standpoints of format, comprehensiveness, and clarity. Postive features (...

  7. EXO-DAT: AN INFORMATION SYSTEM IN SUPPORT OF THE CoRoT/EXOPLANET SCIENCE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deleuil, M.; Meunier, J. C.; Moutou, C.

    2009-08-15

    Exo-Dat is a database and an information system created primarily in support of the exoplanet program of the COnvection ROtation and planetary Transits (CoRoT) mission. In the directions of CoRoT pointings, it provides a united interface to several sets of data: stellar published catalogs, photometric and spectroscopic data obtained during the mission preparation, results from the mission and from follow-up observations, and several mission-specific technical parameters. The new photometric data constitute the subcatalog Exo-Cat, and give consistent 4-color photometry of 14.0 million stars with a completeness to 19th magnitude in the r-filter. It covers several zones in the galactic planemore » around CoRoT pointings, with a total area of 209 deg{sup 2}. This Exo-Dat information system provides essential technical support to the ongoing CoRoT light-curve analyses and ground-based follow-up by supplying additional complementary information such as the prior knowledge of the star's fundamental parameters or its contamination level inside the large CoRoT photometric mask. The database is fully interfaced with VO tools and thus benefits from existing visualization and analysis tools like TOPCAT or ALADIN. It is accessible to the CoRoT community through the Web, and will be gradually opened to the public. It is the ideal tool to prepare the foreseen statistical studies of the properties of the exoplanetary systems. As a VO-compliant system, such analyses could thus benefit from the most up-to-date classifier tools.« less

  8. Inverse planning in the age of digital LINACs: station parameter optimized radiation therapy (SPORT)

    NASA Astrophysics Data System (ADS)

    Xing, Lei; Li, Ruijiang

    2014-03-01

    The last few years have seen a number of technical and clinical advances which give rise to a need for innovations in dose optimization and delivery strategies. Technically, a new generation of digital linac has become available which offers features such as programmable motion between station parameters and high dose-rate Flattening Filter Free (FFF) beams. Current inverse planning methods are designed for traditional machines and cannot accommodate these features of new generation linacs without compromising either dose conformality and/or delivery efficiency. Furthermore, SBRT is becoming increasingly important, which elevates the need for more efficient delivery, improved dose distribution. Here we will give an overview of our recent work in SPORT designed to harness the digital linacs and highlight the essential components of SPORT. We will summarize the pros and cons of traditional beamlet-based optimization (BBO) and direct aperture optimization (DAO) and introduce a new type of algorithm, compressed sensing (CS)-based inverse planning, that is capable of automatically removing the redundant segments during optimization and providing a plan with high deliverability in the presence of a large number of station control points (potentially non-coplanar, non-isocentric, and even multi-isocenters). We show that CS-approach takes the interplay between planning and delivery into account and allows us to balance the dose optimality and delivery efficiency in a controlled way and, providing a viable framework to address various unmet demands of the new generation linacs. A few specific implementation strategies of SPORT in the forms of fixed-gantry and rotational arc delivery are also presented.

  9. [Technological development: a weak link in vaccine innovation in Brazil].

    PubMed

    Homma, Akira; Martins, Reinaldo M; Jessouroum, Ellen; Oliva, Otavio

    2003-01-01

    In very recent years, the federal government has launched important initiatives mean to strengthen science, technology, and innovation in Brazil and thus enhance the results of technological innovation in key areas of the country's economy. Yet these initiatives have not been enough to reduce Brazil's heavy dependence on goods and technology from more developed nations. The article describes the current state of vaccination, production, and technological development of vaccines both internationally and nationally. Some thoughts are also offered on the complexity of vaccine innovation and the various stages whose completion is essential to the whole process of technological development. An analysis is made of the parameters and factors involved in each stage; technical requirements for facilities and equipment; good manufacturing practice guidelines; organizational, infrastructural, and managerial needs; and the lengthy time periods adn high costs entailed in these activities.

  10. Wedge gate valves selecting essentials in pipeline systems designing based on permissible operation parameters

    NASA Astrophysics Data System (ADS)

    Zakirnichnaya, M. M.; Kulsharipov, I. M.

    2017-10-01

    Wedge gate valves are widely used at the fuel and energy complex enterprises. The pipeline valves manufacturers indicate the safe operation resource according to the current regulatory and technical documentation. In this case, the resource value of the valve body strength calculation results is taken into consideration as the main structural part. However, it was determined that the wedge gate valves fail before the assigned resource due to the occurrence of conditions under which the wedge breaks in the hooks and, accordingly, the sealing integrity is not ensured. In this regard, it became necessary to assess the conditions under which the resource should be assigned not only to the valve body, but also to take into account the wedge durability. For this purpose, wedge resource calculations were made using the example of ZKL2 250-25 and ZKL2 300-25 valves using the ABAQUS software package FE-SAFE module under the technological parameters influence on the basis of their stressstrain state calculation results. Operating conditions, under which the wedge resource value is lower than the one set by the manufacturer, were determined. A technique for limiting the operating parameters for ensuring the wedge durability during the wedge gate valve assigned resource is proposed.

  11. A study on technical efficiency of a DMU (review of literature)

    NASA Astrophysics Data System (ADS)

    Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

    2017-11-01

    In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

  12. What We Know (and What We Don't Know) about Training of Cognitive Strategies for Technical Problem Solving.

    ERIC Educational Resources Information Center

    Foshay, Wellesley R.

    The topic of teaching troubleshooting is examined as an example of the teaching of cognitive strategies for technical problem solving. The traditional behavioral approach to teaching troubleshooting has essentially been algorithmic. Recent cognitive research suggests an approach founded first on task analysis and characterized by: (1) analysis of…

  13. A Curriculum to Enhance Decision-Making Skills of Technical Personnel Working in Teams

    ERIC Educational Resources Information Center

    Raju, P. K.; Sankar, Chetan S.; Xue, Yajiong

    2004-01-01

    Rapidly changing engineering designs and business scenarios make it essential for engineers and technical personnel to be trained to be effective team players and project managers. This paper reports the experiences gained in developing and implementing a workshop to train engineers at a steel manufacturing plant. The objective of the workshop was…

  14. Deans of Career and Technical Education: Charting the Course to Senior Administration

    ERIC Educational Resources Information Center

    Levin, Shelley Zarovsky

    2010-01-01

    The purpose of this study was to explore the essential leadership practices, abilities, and experiences of Deans of Career and Technical Education (CTE) and to consider how these Deans of CTE fit into the succession process of the community college. A qualitative case study was conducted with three dyads of career Deans and their supervising…

  15. AIDS: An ICT Model for Integrating Teaching, Learning and Research in Technical University Education in Ghana

    ERIC Educational Resources Information Center

    Asabere, Nana; Togo, Gilbert; Acakpovi, Amevi; Torby, Wisdom; Ampadu, Kwame

    2017-01-01

    Information and Communication Technologies (ICT) has changed the way we communicate and carry out certain daily activities. Globally, ICT has become an essential means for disseminating information. Using Accra Technical University in Ghana as a case study, this paper proposes an ICT model called Awareness Incentives Demand and Support (AIDS). Our…

  16. UNESCO's Programme on Technical and Vocational Education for the First Decade of the New Millennium.

    ERIC Educational Resources Information Center

    Power, Colin N.

    UNESCO (United Nations Educational, Scientific, and Cultural Organization) believes provision of technical and vocational education and training (TVET) to prepare qualified technicians and skilled and semi-skilled workers should be an essential component of the development agenda of all countries. It is about to draft a plan of action for the…

  17. Validation of column-based chromatography processes for the purification of proteins. Technical report No. 14.

    PubMed

    2008-01-01

    PDA Technical Report No. 14 has been written to provide current best practices, such as application of risk-based decision making, based in sound science to provide a foundation for the validation of column-based chromatography processes and to expand upon information provided in Technical Report No. 42, Process Validation of Protein Manufacturing. The intent of this technical report is to provide an integrated validation life-cycle approach that begins with the use of process development data for the definition of operational parameters as a basis for validation, confirmation, and/or minor adjustment to these parameters at manufacturing scale during production of conformance batches and maintenance of the validated state throughout the product's life cycle.

  18. Engineering directorate technical facilities catalog

    NASA Technical Reports Server (NTRS)

    Maloy, Joseph E.

    1993-01-01

    The Engineering Directorate Technical Facilities Catalog is designed to provide an overview of the technical facilities available within the Engineering Directorate at the National Aeronautics and Space Administration (NASA), Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The combined capabilities of these engineering facilities are essential elements of overall JSC capabilities required to manage and perform major NASA engineering programs. The facilities are grouped in the text by chapter according to the JSC division responsible for operation of the facility. This catalog updates the facility descriptions for the JSC Engineering Directorate Technical Facilities Catalog, JSC 19295 (August 1989), and supersedes the Engineering Directorate, Principle test and Development Facilities, JSC, 19962 (November 1984).

  19. Technical editing and the effective communication of scientific results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pieper, G.W.; Picologlou, S.M.

    1996-05-01

    Communication of scientific results--whether for professional journals, poster sessions, oral presentations, or the popular press--is an essential part of any scientific investigation. The technical editor plays an important rolein ensuring that scientists express their results correctly and effectively. Technical editing comprises far more than simple proofreading. The editor`s tasks may range from restructuring whole parpagrphs and suggesting improved graphical aids to writing abstracts and preparing first drafts of proposals. The technical editor works closely with scientists to present complex ideas to differentaudiences, including fellow scentists, funding agencies, and the general public. New computer technologyhas also involved the technical editor notmore » only with on-line editing but also with preparing CD ROMs and World Wide Web pages.« less

  20. American College of Radiology-American Brachytherapy Society practice parameter for electronically generated low-energy radiation sources.

    PubMed

    Devlin, Phillip M; Gaspar, Laurie E; Buzurovic, Ivan; Demanes, D Jeffrey; Kasper, Michael E; Nag, Subir; Ouhib, Zoubir; Petit, Joshua H; Rosenthal, Seth A; Small, William; Wallner, Paul E; Hartford, Alan C

    This collaborative practice parameter technical standard has been created between the American College of Radiology and American Brachytherapy Society to guide the usage of electronically generated low energy radiation sources (ELSs). It refers to the use of electronic X-ray sources with peak voltages up to 120 kVp to deliver therapeutic radiation therapy. The parameter provides a guideline for utilizing ELS, including patient selection and consent, treatment planning, and delivery processes. The parameter reviews the published clinical data with regard to ELS results in skin, breast, and other cancers. This technical standard recommends appropriate qualifications of the involved personnel. The parameter reviews the technical issues relating to equipment specifications as well as patient and personnel safety. Regarding suggestions for educational programs with regard to this parameter,it is suggested that the training level for clinicians be equivalent to that for other radiation therapies. It also suggests that ELS must be done using the same standards of quality and safety as those in place for other forms of radiation therapy. Copyright © 2017 American Brachytherapy Society and American College of Radiology. Published by Elsevier Inc. All rights reserved.

  1. Mobilization and Defense Management Technical Reports Series. Achievement of Industrial Mobilization Objectives in an Economically Interdependent World.

    DTIC Science & Technology

    1983-05-01

    maintenance of the essential industrial base and to put in place the framework and processes---’ DD I O 1473 £O,TION OF I NOV65 IS OBSOLETE{ SECjBITY...the essential indu,, ......... -: -, :.It .n pl3ce the framework and processes necessary to resolve the conflict between liberal trade and national...domestic capabilities of selected industries essential to national security. Major Recommendations 1. Modify U.S. trade policy to allow for goverr ent

  2. Coup d’Oeil: Military Geography and the Operational Level of War

    DTIC Science & Technology

    1991-05-16

    afUP D’OEIL Every day I feel nmre rnd more in need of an atlas, as geogrphvy iv the minutest details. is essential to a true nli "tary education. I...categorizing terrain have provided the essential prerequisites for the development of the IPB process. The process allows for an in-depth technical analysis of...is theater whiidch define the lines of essential to the c •umnrs plan. operation. ... defined by a conpetent authority. CENTER Zi f GRAVIMI Center of

  3. Inertial Sensor Technology for Elite Swimming Performance Analysis: A Systematic Review

    PubMed Central

    Mooney, Robert; Corley, Gavin; Godfrey, Alan; Quinlan, Leo R; ÓLaighin, Gearóid

    2015-01-01

    Technical evaluation of swimming performance is an essential factor of elite athletic preparation. Novel methods of analysis, incorporating body worn inertial sensors (i.e., Microelectromechanical systems, or MEMS, accelerometers and gyroscopes), have received much attention recently from both research and commercial communities as an alternative to video-based approaches. This technology may allow for improved analysis of stroke mechanics, race performance and energy expenditure, as well as real-time feedback to the coach, potentially enabling more efficient, competitive and quantitative coaching. The aim of this paper is to provide a systematic review of the literature related to the use of inertial sensors for the technical analysis of swimming performance. This paper focuses on providing an evaluation of the accuracy of different feature detection algorithms described in the literature for the analysis of different phases of swimming, specifically starts, turns and free-swimming. The consequences associated with different sensor attachment locations are also considered for both single and multiple sensor configurations. Additional information such as this should help practitioners to select the most appropriate systems and methods for extracting the key performance related parameters that are important to them for analysing their swimmers’ performance and may serve to inform both applied and research practices. PMID:26712760

  4. Parameters influencing the yield and composition of the essential oil from Cretan Vitex agnus-castus fruits.

    PubMed

    Sørensen, J M; Katsiotis, S T

    2000-04-01

    Mature and immature fruits of a Cretan Vitex agnus-castus L. population were chosen to investigate different parameters such as comminution, maturity, distillation period and extraction method influencing the essential oil yield and composition. The effect of the comminution and the maturity of the plant material showed highly significant differences in yield and composition of the essential oils obtained, as well as the distillation duration from one to five hours and the method applied (hydrodistillation and simultaneous distillation extraction). The variation of 36 essential oil components due to the parameters applied was studied. The results showed that many different essential oil qualities can be obtained from the same plant material according to the parameters employed in its extraction. Entire fruits hydrodistilled for one hour yielded an oil much richer in monoterpene hydrocarbons and oxygenated compounds whereas the best combination to obtain an oil rich in less volatile compounds is by SDE of comminuted fruits for five hours. For mature fruits the main components varied as follows due to the parameters studied: sabinene 16.4-44.1%, 1,8-cineole 8.4-15.2%, beta-caryophyllene 2.1-5.0%, and trans-beta-farnesene 5.0-11.7%.

  5. Performance comparison of extracellular spike sorting algorithms for single-channel recordings.

    PubMed

    Wild, Jiri; Prekopcsak, Zoltan; Sieger, Tomas; Novak, Daniel; Jech, Robert

    2012-01-30

    Proper classification of action potentials from extracellular recordings is essential for making an accurate study of neuronal behavior. Many spike sorting algorithms have been presented in the technical literature. However, no comparative analysis has hitherto been performed. In our study, three widely-used publicly-available spike sorting algorithms (WaveClus, KlustaKwik, OSort) were compared with regard to their parameter settings. The algorithms were evaluated using 112 artificial signals (publicly available online) with 2-9 different neurons and varying noise levels between 0.00 and 0.60. An optimization technique based on Adjusted Mutual Information was employed to find near-optimal parameter settings for a given artificial signal and algorithm. All three algorithms performed significantly better (p<0.01) with optimized parameters than with the default ones. WaveClus was the most accurate spike sorting algorithm, receiving the best evaluation score for 60% of all signals. OSort operated at almost five times the speed of the other algorithms. In terms of accuracy, OSort performed significantly less well (p<0.01) than WaveClus for signals with a noise level in the range 0.15-0.30. KlustaKwik achieved similar scores to WaveClus for signals with low noise level 0.00-0.15 and was worse otherwise. In conclusion, none of the three compared algorithms was optimal in general. The accuracy of the algorithms depended on proper choice of the algorithm parameters and also on specific properties of the examined signal. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Phosphorus recovery as struvite from farm, municipal and industrial waste: Feedstock suitability, methods and pre-treatments.

    PubMed

    Kataki, Sampriti; West, Helen; Clarke, Michèle; Baruah, D C

    2016-03-01

    Global population growth requires intensification of agriculture, for which a sustainable supply of phosphorus (P) is essential. Since natural P reserves are diminishing, recovering P from wastes and residues is an increasingly attractive prospect, particularly as technical and economic potential in the area is growing. In addition to providing phosphorus for agricultural use, precipitation of P from waste residues and effluents lessens their nutrient loading prior to disposal. This paper critically reviews published methods for P recovery from waste streams (municipal, farm and industrial) with emphasis on struvite (MgNH4PO4·6H2O) crystallisation, including pre-treatments to maximise recovery. Based on compositional parameters of a range of wastes, a Feedstock Suitability Index (FSI) was developed as a guide to inform researchers and operators of the relative potential for struvite production from each waste. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Exergo-Economic Analysis of an Experimental Aircraft Turboprop Engine Under Low Torque Condition

    NASA Astrophysics Data System (ADS)

    Atilgan, Ramazan; Turan, Onder; Aydin, Hakan

    Exergo-economic analysis is an unique combination of exergy analysis and cost analysis conducted at the component level. In exergo-economic analysis, cost of each exergy stream is determined. Inlet and outlet exergy streams of the each component are associated to a monetary cost. This is essential to detect cost-ineffective processes and identify technical options which could improve the cost effectiveness of the overall energy system. In this study, exergo-economic analysis is applied to an aircraft turboprop engine. Analysis is based on experimental values at low torque condition (240 N m). Main components of investigated turboprop engine are the compressor, the combustor, the gas generator turbine, the free power turbine and the exhaust. Cost balance equations have been formed for all components individually and exergo-economic parameters including cost rates and unit exergy costs have been calculated for each component.

  8. Mechanism of Flutter A Theoretical and Experimental Investigation of the Flutter Problem

    NASA Technical Reports Server (NTRS)

    Theodorsen, Theodore; Garrick, I E

    1940-01-01

    The results of the basic flutter theory originally devised in 1934 and published as NACA Technical Report no. 496 are presented in a simpler and more complete form convenient for further studies. The paper attempts to facilitate the judgement of flutter problems by a systematic survey of the theoretical effects of the various parameters. A large number of experiments were conducted on cantilever wings, with and without ailerons, in the NACA high-speed wind tunnel for the purpose of verifying the theory and to study its adaptability to three-dimensional problems. The experiments included studies on wing taper ratios, nacelles, attached floats, and external bracings. The essential effects in the transition to the three-dimensional problem have been established. Of particular interest is the existence of specific flutter modes as distinguished from ordinary vibration modes. It is shown that there exists a remarkable agreement between theoretical and experimental results.

  9. Measuring The Neutron Lifetime to One Second Using in Beam Techniques

    NASA Astrophysics Data System (ADS)

    Mulholland, Jonathan; NIST In Beam Lifetime Collaboration

    2013-10-01

    The decay of the free neutron is the simplest nuclear beta decay and is the prototype for charged current semi-leptonic weak interactions. A precise value for the neutron lifetime is required for consistency tests of the Standard Model and is an essential parameter in the theory of Big Bang Nucleosynthesis. A new measurement of the neutron lifetime using the in-beam method is planned at the National Institute of Standards and Technology Center for Neutron Research. The systematic effects associated with the in-beam method are markedly different than those found in storage experiments utilizing ultracold neutrons. Experimental improvements, specifically recent advances in the determination of absolute neutron fluence, should permit an overall uncertainty of 1 second on the neutron lifetime. The technical improvements in the in-beam technique, and the path toward improving the precision of the new measurement will be discussed.

  10. Arterial Spin Labeling (ASL) fMRI: advantages, theoretical constrains, and experimental challenges in neurosciences.

    PubMed

    Borogovac, Ajna; Asllani, Iris

    2012-01-01

    Cerebral blood flow (CBF) is a well-established correlate of brain function and therefore an essential parameter for studying the brain at both normal and diseased states. Arterial spin labeling (ASL) is a noninvasive fMRI technique that uses arterial water as an endogenous tracer to measure CBF. ASL provides reliable absolute quantification of CBF with higher spatial and temporal resolution than other techniques. And yet, the routine application of ASL has been somewhat limited. In this review, we start by highlighting theoretical complexities and technical challenges of ASL fMRI for basic and clinical research. While underscoring the main advantages of ASL versus other techniques such as BOLD, we also expound on inherent challenges and confounds in ASL perfusion imaging. In closing, we expound on several exciting developments in the field that we believe will make ASL reach its full potential in neuroscience research.

  11. Thermal diffusivity and adiabatic limit temperature characterization of consolidate granular expanded perlite using the flash method

    NASA Astrophysics Data System (ADS)

    Raefat, Saad; Garoum, Mohammed; Laaroussi, Najma; Thiam, Macodou; Amarray, Khaoula

    2017-07-01

    In this work experimental investigation of apparent thermal diffusivity and adiabatic limit temperature of expanded granular perlite mixes has been made using the flash technic. Perlite granulates were sieved to produce essentially three characteristic grain sizes. The consolidated samples were manufactured by mixing controlled proportions of the plaster and water. The effect of the particle size on the diffusivity was examined. The inverse estimation of the diffusivity and the adiabatic limit temperature at the rear face as well as the heat losses coefficients were performed using several numerical global minimization procedures. The function to be minimized is the quadratic distance between the experimental temperature rise at the rear face and the analytical model derived from the one dimension heat conduction. It is shown that, for all granulometry tested, the estimated parameters lead to a good agreement between the mathematical model and experimental data.

  12. Surgical Coagulator With Carbon Dioxide Laser For Gynecology

    NASA Astrophysics Data System (ADS)

    Wolinski, Wieslaw; Kazmirowski, Antoni; Korobowicz, Witold; Olborski, Zbigniew

    1987-10-01

    The technical data and parameters of the CO2 surgical laser for gynecology are given. Coagulator was designed and constructed in Institute of Microelectronics and Optoelectronics Warsaw Technical University.

  13. [Intraobserver reliability of the Handball-specific complex test (HBKT)].

    PubMed

    Schwesig, R; Koke, A; Jungermann, P; Fischer, D; Noack, F; Becker, S; Fieseler, G; Delank, K-S

    2014-09-01

    There are clearly no complex and sports-specific tests in handball. So far, no specific complex test has been developed and verified for its intraobserver reliability (IR). The aim of this study was to determine the IR of the Handball-specific complex test (HBKT). The HBKT was applied twice at an interval of two days to two teams of the German Third League (n = 30; age 25.7 ± 3.9 years, range: 19 - 33 years). Within the HBKT, the stress parameters lactate and heart rate as well as the loading parameters time, throwing velocity and number of errors were collected. Overall, 23 % (3/13) of the stress parameters showed a high relative [intraclass correlation coefficient (ICC) > 0.75] and absolute [coefficient of variation (CV) ≤ 5 %] IR. On average, a sufficient absolute (∅CV = 11.3 %) and relative (∅ICC = 0.67) IR was observed. Without the parameters "missed throws" and "technical errors" in both rounds, the IR increased significantly (∅ICC: from 0.67 to 0.72 & ∅CV from 11.3 to 6.3 %). The heart rate was comparatively more reliable than lactate (∅ICC = 0.71 & ∅CV = 4.23 % vs. ∅ICC = 0.65 & ∅CV = 15.1 %). With respect to load parameters in round one, 50 % (5/10) showed a high IR; in round two, these values decreased to 40 % (4/10). The mean IR of the parameters in round one was higher than in round two (∅ICC = 0.71 & ∅CV = 12.2 % vs. ∅ICC = 0.60 & ∅CV = 14.3 %). Overall, there was an improvement of the athletes in most stress and load parameters from session one to session two. The HBKT can be attested with a sufficient intraobserver reliability. When the parameters "missed throws" and "technical errors" were excluded, the IR further increased significantly. Therefore, these parameters should be recorded in order to standardized the HBKT, but not be included in the statistical analysis. There are discrete adaptation and learning effects. For this reason, it is essential to familiarise trainers and players with the HBKT test procedure before the first measurement. Otherwise training effects can be easily overrated. Moreover, the test concept of HBKT can be used as a blueprint for the development of sport-specific tests in other team sports (e. g., soccer, basketball). For example, we generated a complex soccer-specific field test 1 based on the HBKT. © Georg Thieme Verlag KG Stuttgart · New York.

  14. Electrical Power Station Theory. A Course of Technical Information for Electrical Power Station Wireman Apprentices. Revised Edition.

    ERIC Educational Resources Information Center

    Lane Community Coll., Eugene, OR.

    This third-year course for electrical power station wirer apprentices is a foundation for the study of all aspects of installation and maintenance of power station equipment. It also provides a good technical background as well as the general knowledge essential to power station operator trainees. The course is intended to be equivalent to a…

  15. Promoting Change in State Policy Decisionmaking on Quality Infant/Toddler Child Care and Head Start Services: Study on a Technical Assistance Forum.

    ERIC Educational Resources Information Center

    Griffin, Abbey; Fiene, Richard

    In June 1991, the National Center for Clinical Infant Programs invited 320 state policymakers, leaders of national and state advocacy organizations, and practitioners to a technical assistance forum on "Finding and Funding Quality Child Care and Head Start Services for Infants and Toddlers." The forum focused on essential practices in…

  16. Technical solutions for mitigating security threats caused by health professionals in clinical settings.

    PubMed

    Fernandez-Aleman, Jose Luis; Belen Sanchez Garcia, Ana; Garcia-Mateos, Gines; Toval, Ambrosio

    2015-08-01

    The objective of this paper is to present a brief description of technical solutions for health information system security threats caused by inadequate security and privacy practices in healthcare professionals. A literature search was carried out in ScienceDirect, ACM Digital Library and IEEE Digital Library to find papers reporting technical solutions for certain security problems in information systems used in clinical settings. A total of 17 technical solutions were identified: measures for password security, the secure use of e-mail, the Internet, portable storage devices, printers and screens. Although technical safeguards are essential to the security of healthcare organization's information systems, good training, awareness programs and adopting a proper information security policy are particularly important to prevent insiders from causing security incidents.

  17. 10 CFR 51.103 - Record of decision-general.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... preferences among alternatives based on relevant factors, including economic and technical considerations where appropriate, the NRC's statutory mission, and any essential considerations of national policy...

  18. Technics study on high accuracy crush dressing and sharpening of diamond grinding wheel

    NASA Astrophysics Data System (ADS)

    Jia, Yunhai; Lu, Xuejun; Li, Jiangang; Zhu, Lixin; Song, Yingjie

    2011-05-01

    Mechanical grinding of artificial diamond grinding wheel was traditional wheel dressing process. The rotate speed and infeed depth of tool wheel were main technics parameters. The suitable technics parameters of metals-bonded diamond grinding wheel and resin-bonded diamond grinding wheel high accuracy crush dressing were obtained by a mount of experiment in super-hard material wheel dressing grind machine and by analysis of grinding force. In the same time, the effect of machine sharpening and sprinkle granule sharpening was contrasted. These analyses and lots of experiments had extent instruction significance to artificial diamond grinding wheel accuracy crush dressing.

  19. The Reading Essential Skill Screener--Preschool Version (RESS-P): Studies of Reliability and Validity

    ERIC Educational Resources Information Center

    Erford, Bradley T.

    2004-01-01

    Technical characteristics of the Reading Essential Skill Screener--Preschool Version (RESS-P) were studied using four independent samples of boys and girls aged 3-5 years. A decision efficiency study (N = 91) resulted in a total predictive value (TPV) of .85 when compared with the criterion of teacher report/judgment of emerging literacy at-risk…

  20. Building an experimental model of the human body with non-physiological parameters.

    PubMed

    Labuz, Joseph M; Moraes, Christopher; Mertz, David R; Leung, Brendan M; Takayama, Shuichi

    2017-03-01

    New advances in engineering and biomedical technology have enabled recent efforts to capture essential aspects of human physiology in microscale, in-vitro systems. The application of these advances to experimentally model complex processes in an integrated platform - commonly called a 'human-on-a-chip (HOC)' - requires that relevant compartments and parameters be sized correctly relative to each other and to the system as a whole. Empirical observation, theoretical treatments of resource distribution systems and natural experiments can all be used to inform rational design of such a system, but technical and fundamental challenges (e.g. small system blood volumes and context-dependent cell metabolism, respectively) pose substantial, unaddressed obstacles. Here, we put forth two fundamental principles for HOC design: inducing in-vivo -like cellular metabolic rates is necessary and may be accomplished in-vitro by limiting O 2 availability and that the effects of increased blood volumes on drug concentration can be mitigated through pharmacokinetics-based treatments of solute distribution. Combining these principles with natural observation and engineering workarounds, we derive a complete set of design criteria for a practically realizable, physiologically faithful, five-organ millionth-scale (× 10 -6 ) microfluidic model of the human body.

  1. Building an experimental model of the human body with non-physiological parameters

    PubMed Central

    Labuz, Joseph M.; Moraes, Christopher; Mertz, David R.; Leung, Brendan M.; Takayama, Shuichi

    2017-01-01

    New advances in engineering and biomedical technology have enabled recent efforts to capture essential aspects of human physiology in microscale, in-vitro systems. The application of these advances to experimentally model complex processes in an integrated platform — commonly called a ‘human-on-a-chip (HOC)’ — requires that relevant compartments and parameters be sized correctly relative to each other and to the system as a whole. Empirical observation, theoretical treatments of resource distribution systems and natural experiments can all be used to inform rational design of such a system, but technical and fundamental challenges (e.g. small system blood volumes and context-dependent cell metabolism, respectively) pose substantial, unaddressed obstacles. Here, we put forth two fundamental principles for HOC design: inducing in-vivo-like cellular metabolic rates is necessary and may be accomplished in-vitro by limiting O2 availability and that the effects of increased blood volumes on drug concentration can be mitigated through pharmacokinetics-based treatments of solute distribution. Combining these principles with natural observation and engineering workarounds, we derive a complete set of design criteria for a practically realizable, physiologically faithful, five-organ millionth-scale (× 10−6) microfluidic model of the human body. PMID:28713851

  2. Factors influencing physical and technical variability in the English Premier League.

    PubMed

    Bush, Michael D; Archer, David T; Hogg, Robert; Bradley, Paul S

    2015-10-01

    To investigate match-to-match variability of physical and technical performances in English Premier League players and quantify the influence of positional and contextual factors. Match data (N = 451) were collected using a multicamera computerized tracking system across multiple seasons (2005-06 to 2012-13). The coefficient of variation (CV) was calculated from match to match for physical and technical performances in selected positions across different match contexts (location, standard, and result). Wide midfielders demonstrated the greatest CVs for total distance (4.9% ± 5.9%) and central midfielders the smallest (3.6% ± 2.0%); nevertheless, all positions exhibited CVs <5% (P > .05, effect size [ES] 0.1-0.3). Central defenders demonstrated the greatest CVs and wide midfielders the lowest for both high-intensity running (20.2% ± 8.8% and 13.7% ± 7.7%, P < .05, ES 0.4-0.8) and sprint distance (32.3% ± 13.8% and 22.6% ± 11.2%, P < .05, ES 0.5-0.8). Technical indicators such as tackles (83.7% ± 42.3%), possessions won (47.2% ± 27.9%), and interceptions (59.1% ± 37.3%) illustrated substantial variability for attackers compared with all other positions (P < .05, ES 0.4-1.1). Central defenders demonstrated large variability for the number of times tackled per match (144.9% ± 58.3%) and passes attempted and received compared with other positions (39.2% ± 17.5% and 46.9% ± 20.2%, P < .001, ES 0.6-1.8). Contextual factors had limited impact on the variability of physical and technical parameters. The data demonstrate that technical parameters varied more from match to match than physical parameters. Defensive players (fullbacks and central defenders) displayed higher CVs for offensive technical variables, while attacking players (attackers and wide midfielders) exhibited higher CVs for defensive technical variables. Physical and technical performances are variable per se regardless of context.

  3. Goddard Geophysical and Astronomical Observatory

    NASA Technical Reports Server (NTRS)

    Covey, Rawland; Kodak, Charles

    1999-01-01

    This report summarizes the technical parameters and the technical staff of the VLBI system at GGAO. It also gives an overview of VLBI activities during the previous year. The outlook lists the tasks planned for 1999.

  4. An Extensive Unified Thermo-Electric Module Characterization Method

    PubMed Central

    Attivissimo, Filippo; Guarnieri Calò Carducci, Carlo; Lanzolla, Anna Maria Lucia; Spadavecchia, Maurizio

    2016-01-01

    Thermo-Electric Modules (TEMs) are being increasingly used in power generation as a valid alternative to batteries, providing autonomy to sensor nodes or entire Wireless Sensor Networks, especially for energy harvesting applications. Often, manufacturers provide some essential parameters under determined conditions, like for example, maximum temperature difference between the surfaces of the TEM or for maximum heat absorption, but in many cases, a TEM-based system is operated under the best conditions only for a fraction of the time, thus, when dynamic working conditions occur, the performance estimation of TEMs is crucial to determine their actual efficiency. The focus of this work is on using a novel procedure to estimate the parameters of both the electrical and thermal equivalent model and investigate their relationship with the operating temperature and the temperature gradient. The novelty of the method consists in the use of a simple test configuration to stimulate the modules and simultaneously acquire electrical and thermal data to obtain all parameters in a single test. Two different current profiles are proposed as possible stimuli, which use depends on the available test instrumentation, and relative performance are compared both quantitatively and qualitatively, in terms of standard deviation and estimation uncertainty. Obtained results, besides agreeing with both technical literature and a further estimation method based on module specifications, also provides the designer a detailed description of the module behavior, useful to simulate its performance in different scenarios. PMID:27983575

  5. An Extensive Unified Thermo-Electric Module Characterization Method.

    PubMed

    Attivissimo, Filippo; Guarnieri Calò Carducci, Carlo; Lanzolla, Anna Maria Lucia; Spadavecchia, Maurizio

    2016-12-13

    Thermo-Electric Modules (TEMs) are being increasingly used in power generation as a valid alternative to batteries, providing autonomy to sensor nodes or entire Wireless Sensor Networks, especially for energy harvesting applications. Often, manufacturers provide some essential parameters under determined conditions, like for example, maximum temperature difference between the surfaces of the TEM or for maximum heat absorption, but in many cases, a TEM-based system is operated under the best conditions only for a fraction of the time, thus, when dynamic working conditions occur, the performance estimation of TEMs is crucial to determine their actual efficiency. The focus of this work is on using a novel procedure to estimate the parameters of both the electrical and thermal equivalent model and investigate their relationship with the operating temperature and the temperature gradient. The novelty of the method consists in the use of a simple test configuration to stimulate the modules and simultaneously acquire electrical and thermal data to obtain all parameters in a single test. Two different current profiles are proposed as possible stimuli, which use depends on the available test instrumentation, and relative performance are compared both quantitatively and qualitatively, in terms of standard deviation and estimation uncertainty. Obtained results, besides agreeing with both technical literature and a further estimation method based on module specifications, also provides the designer a detailed description of the module behavior, useful to simulate its performance in different scenarios.

  6. Impedance analysis of GPCR-mediated changes in endothelial barrier function: overview, and fundamental considerations for stable and reproducible measurements

    PubMed Central

    Stolwijk, Judith A.; Matrougui, Khalid; Renken, Christian W.; Trebak, Mohamed

    2014-01-01

    The past 20 years have seen significant growth in using impedance-based assays to understand the molecular underpinning of endothelial and epithelial barrier function in response to physiological agonists, pharmacological and toxicological compounds. Most studies on barrier function use G protein coupled receptor (GPCR) agonists which couple to fast and transient changes in barrier properties. The power of impedance based techniques such as Electric Cell-Substrate Impedance Sensing (ECIS) reside in its ability to detect minute changes in cell layer integrity label-free and in real-time ranging from seconds to days. We provide a comprehensive overview of the biophysical principles, applications and recent developments in impedance-based methodologies. Despite extensive application of impedance analysis in endothelial barrier research little attention has been paid to data analysis and critical experimental variables, which are both essential for signal stability and reproducibility. We describe the rationale behind common ECIS data presentation and interpretation and illustrate practical guidelines to improve signal intensity by adapting technical parameters such as electrode layout, monitoring frequency or parameter (resistance versus impedance magnitude). Moreover, we discuss the impact of experimental parameters, including cell source, liquid handling and agonist preparation on signal intensity and kinetics. Our discussions are supported by experimental data obtained from human microvascular endothelial cells challenged with three GPCR agonists, thrombin, histamine and Sphingosine-1-Phosphate. PMID:25537398

  7. Impedance analysis of GPCR-mediated changes in endothelial barrier function: overview and fundamental considerations for stable and reproducible measurements.

    PubMed

    Stolwijk, Judith A; Matrougui, Khalid; Renken, Christian W; Trebak, Mohamed

    2015-10-01

    The past 20 years has seen significant growth in using impedance-based assays to understand the molecular underpinning of endothelial and epithelial barrier function in response to physiological agonists and pharmacological and toxicological compounds. Most studies on barrier function use G protein-coupled receptor (GPCR) agonists which couple to fast and transient changes in barrier properties. The power of impedance-based techniques such as electric cell-substrate impedance sensing (ECIS) resides in its ability to detect minute changes in cell layer integrity label-free and in real-time ranging from seconds to days. We provide a comprehensive overview of the biophysical principles, applications, and recent developments in impedance-based methodologies. Despite extensive application of impedance analysis in endothelial barrier research, little attention has been paid to data analysis and critical experimental variables, which are both essential for signal stability and reproducibility. We describe the rationale behind common ECIS data presentation and interpretation and illustrate practical guidelines to improve signal intensity by adapting technical parameters such as electrode layout, monitoring frequency, or parameter (resistance versus impedance magnitude). Moreover, we discuss the impact of experimental parameters, including cell source, liquid handling, and agonist preparation on signal intensity and kinetics. Our discussions are supported by experimental data obtained from human microvascular endothelial cells challenged with three GPCR agonists, thrombin, histamine, and sphingosine-1-phosphate.

  8. Support Materials for the Software Technical Review Process

    DTIC Science & Technology

    1988-04-01

    the Software Technical Review Process Softwar-e reviewing is a general term applied to techniques for the use of human hitellectual power to detect...more systematic than random. It utilizes data supplied by students, rather than relying solely on the subjective opinions of the instructor. The...The experience of other users is now essential.) "• Are the resulting grades accurate? (Thus far, they appear to correlate with student grades on

  9. PNNL Supports Hanford Waste Treatment

    ScienceCinema

    None

    2018-04-16

    For more than 40 years, technical assistance from PNNL has supported the operations and processing of Hanford tank waste. Our expertise in tank waste chemistry, fluid dynamics and scaling, waste forms, and safety bases has helped to shape the site’s waste treatment baseline and solve operational challenges. The historical knowledge and unique scientific and technical expertise at PNNL are essential to the success of the Hanford mission.

  10. [Update to ISO 15189:2012, and future prospects].

    PubMed

    Shimoda, Katsuji; Kubono, Katsuo

    2014-06-01

    ISO (the International Organization for Standardization) is a worldwide federation of national standard bodies (ISO member bodies). The work of preparing international standards is normally carried out through ISO technical committees. ISO 15189 was prepared by Technical Committee ISO/TC 212, clinical laboratory testing, and in vitro diagnostic test systems. This third edition replaces the second edition (ISO 15189:2007), which was technically revised. Medical laboratory services are essential for patient care and, therefore, have to be available to meet the needs of all patients and the clinical personnel responsible for the care of those patients.

  11. WE-G-9A-01: Radiation Oncology Outcomes Informatics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mayo, C; Miller, R; Sloan, J

    2014-06-15

    The construction of databases and support software to enable routine and systematic aggregation, analysis and reporting of patient outcomes data is emerging as an important area. “How have results for our patients been affected by the improvements we have made in our practice and in the technologies we use?” To answer this type of fundamental question about the overall pattern of efficacy observed, it is necessary to systematically gather and analyze data on all patients treated within a clinic. Clinical trials answer, in great depth and detail, questions about outcomes for the subsets of patients enrolled in a given trial.more » However, routine aggregation and analysis of key treatment parameter data and outcomes information for all patients is necessary to recognize emergent patterns that would be of interest from a public health or practice perspective and could better inform design of clinical trials or the evolution of best practice principals. To address these questions, Radiation Oncology outcomes databases need to be constructed to enable combination essential data from a broad group of data types including: diagnosis and staging, dose volume histogram metrics, patient reported outcomes, toxicity metrics, performance status, treatment plan parameters, demographics, DICOM data and demographics. Developing viable solutions to automate aggregation and analysis of this data requires multidisciplinary efforts to define nomenclatures, modify clinical processes and develop software and database tools requires detailed understanding of both clinical and technical issues. This session will cover the developing area of Radiation Oncology Outcomes Informatics. Learning Objectives: Audience will be able to speak to the technical requirements (software, database, web services) which must be considered in designing an outcomes database. Audience will be able to understand the content and the role of patient reported outcomes as compared to traditional toxicity measures. Audience will be understand approaches, clinical process changes, consensus building efforts and standardizations which must be addressed to succeed in a multi-disciplinary effort to aggregate data for all patients. Audience will be able to discuss technical and process issues related to pooling data among institutions in the context of collaborative studies among the presenting institutions.« less

  12. Plasma Sterilization: New Epoch in Medical Textiles

    NASA Astrophysics Data System (ADS)

    Senthilkumar, P.; Arun, N.; Vigneswaran, C.

    2015-04-01

    Clothing is perceived to be second skin to the human body since it is in close contact with the human skin most of the times. In hospitals, use of textile materials in different forms and sterilization of these materials is an essential requirement for preventing spread of germs. The need for appropriate disinfection and sterilization techniques is of paramount importance. There has been a continuous demand for novel sterilization techniques appropriate for use on various textile materials as the existing sterilization techniques suffer from various technical and economical drawbacks. Plasma sterilization is the alternative method, which is friendlier and more effective on the wide spectrum of prokaryotic and eukaryotic microorganisms. Basically, the main inactivation factors for cells exposed to plasma are heat, UV radiation and various reactive species. Plasma exposure can kill micro-organisms on a surface in addition to removing adsorbed monolayer of surface contaminants. Advantages of plasma surface treatment are removal of contaminants from the surface, change in the surface energy and sterilization of the surface. Plasma sterilization aims to kill and/or remove all micro-organisms which may cause infection of humans or animals, or which can cause spoilage of foods or other goods. This review paper emphasizes necessity for sterilization, essentials of sterilization, mechanism of plasma sterilization and the parameters influencing it.

  13. Training Manual for Elements of Interface Definition and Control

    NASA Technical Reports Server (NTRS)

    Lalli, Vincent R. (Editor); Kastner, Robert E. (Editor); Hartt, Henry N. (Editor)

    1997-01-01

    The primary thrust of this manual is to ensure that the format and information needed to control interfaces between equipment are clear and understandable. The emphasis is on controlling the engineering design of the interface and not on the functional performance requirements of the system or the internal workings of the interfacing equipment. Interface control should take place, with rare exception, at the interfacing elements and no further. There are two essential sections of the manual. Chapter 2, Principles of Interface Control, discusses how interfaces are defined. It describes different types of interfaces to be considered and recommends a format for the documentation necessary for adequate interface control. Chapter 3, The Process: Through the Design Phases, provides tailored guidance for interface definition and control. This manual can be used to improve planned or existing interface control processes during system design and development. It can also be used to refresh and update the corporate knowledge base. The information presented herein will reduce the amount of paper and data required in interface definition and control processes by as much as 50 percent and will shorten the time required to prepare an interface control document. It also highlights the essential technical parameters that ensure that flight subsystems will indeed fit together and function as intended after assembly and checkout.

  14. A new principle technic for the transformation from frequency domain to time domain

    NASA Astrophysics Data System (ADS)

    Gao, Ben-Qing

    2017-03-01

    A principle technic for the transformation from frequency domain to time domain is presented. Firstly, a special type of frequency domain transcendental equation is obtained for an expected frequency domain parameter which is a rational or irrational fraction expression. Secondly, the inverse Laplace transformation is performed. When the two time-domain factors corresponding to the two frequency domain factors at two sides of frequency domain transcendental equation are known quantities, a time domain transcendental equation is reached. At last, the expected time domain parameter corresponding to the expected frequency domain parameter can be solved by the inverse convolution process. Proceeding from rational or irrational fraction expression, all solving process is provided. In the meantime, the property of time domain sequence is analyzed and the strategy for choosing the parameter values is described. Numerical examples are presented to verify the proposed theory and technic. Except for rational or irrational fraction expressions, examples of complex relative permittivity of water and plasma are used as verification method. The principle method proposed in the paper can easily solve problems which are difficult to be solved by Laplace transformation.

  15. Important technical parameters are not presented in reports of intraoral digital radiography in endodontic treatment: recommendations for future studies.

    PubMed

    Konishi, Masaru; Lindh, Christina; Nilsson, Mats; Tanimoto, Keiji; Rohlin, Madeleine

    2012-08-01

    The aims of this study were to review the literature on intraoral digital radiography in endodontic treatment with focus on technical parameters and to propose recommendations for improving the quality of reports in future publications. Two electronic databases were searched. Titles and abstracts were selected according to preestablished criteria. Data were extracted using a model of image acquisition and interpretation. The literature search yielded 233 titles and abstracts; 61 reports were read in full text. Recent reports presented technical parameters more thoroughly than older reports. Most reported important parameters for the x-ray unit, but for image interpretation only about one-half of the publications cited resolution of the display system and fewer than one-half bit depth of the graphics card. The methodologic quality of future publications must be improved to permit replication of studies and comparison of results between studies in dental digital radiography. Our recommendations can improve the quality of studies on diagnostic accuracy. Copyright © 2012 Mosby, Inc. All rights reserved.

  16. Engineering Technical Review Planning Briefing

    NASA Technical Reports Server (NTRS)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  17. 76 FR 40755 - Information Collection Requests Under OMB Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-11

    ... essential information from individuals, including technical and language skills, and availability for Peace... assessment of an individual's qualifications to serve as a Peace Corps Volunteer including practical and...

  18. PVWatts Version 1 Technical Reference

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dobos, A. P.

    2013-10-01

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  19. 47 CFR 90.763 - EA, Regional and nationwide system operations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... on a case-by-case basis upon submission by the EA or Regional licensee of: (A) A technical analysis... by a licensee or the Commission, an EA or regional licensee shall furnish the technical parameters...

  20. Sensitivity analysis of the add-on price estimate for the silicon web growth process

    NASA Technical Reports Server (NTRS)

    Mokashi, A. R.

    1981-01-01

    The web growth process, a silicon-sheet technology option, developed for the flat plate solar array (FSA) project, was examined. Base case data for the technical and cost parameters for the technical and commercial readiness phase of the FSA project are projected. The process add on price, using the base case data for cost parameters such as equipment, space, direct labor, materials and utilities, and the production parameters such as growth rate and run length, using a computer program developed specifically to do the sensitivity analysis with improved price estimation are analyzed. Silicon price, sheet thickness and cell efficiency are also discussed.

  1. Admission Market Research: An Alternative to Decline in the Eighties.

    ERIC Educational Resources Information Center

    Lolli, Anthony; Scannell, James

    1983-01-01

    Institutional commitment, financial resources, and technical skills are essential components in meaningful, proactive marketing research. Some recently developed approaches and efforts illustrate the possibilities of such research. (MSE)

  2. Measuring Pollution Prevention

    EPA Pesticide Factsheets

    Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This page introduces the concept of P2 measurement.

  3. RAS Initiative - Community Outreach

    Cancer.gov

    Through community and technical collaborations, workshops and symposia, and the distribution of reference reagents, the RAS Initiative seeks to increase the sharing of knowledge and resources essential to defeating cancers caused by mutant RAS genes.

  4. 47 CFR 5.125 - Authorized points of communication.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (OTHER THAN BROADCAST) Technical Standards and Operating Requirements § 5.125 Authorized points of... communications are essential to the conduct of the research project, authority may be granted to communicate with...

  5. Effect of cattle management practices on raw milk quality on farms operating in a two-stage dairy chain.

    PubMed

    Sraïri, M T; Benhouda, H; Kuper, M; Le Gal, P Y

    2009-02-01

    In many developing countries, milk production varies greatly according to farm size, cattle breed, and milking practices. However, production systems often are dominated by smallholder farms. Therefore, relatively small volumes of milk are delivered daily from numerous farms to intermediate cooperatives which supply industrial units. This paper argues that in such two-stage dairy chains, milk quality could be improved by focusing on farming practices rather than on the testing of individual deliveries. Indeed, it is difficult to analyze their quality due to technical, economic, and logistic limitations. The objective of this study is to link on-farm practices with milk chemical quality parameters (fat and protein) and hygienic quality criteria (Aerobic Plate Count, APC and Coliforms). Cattle management practices were monitored monthly over one year on 23 farms located on an irrigation scheme in Morocco. 276 milk samples were analyzed. The monthly variability of milk quality parameters was then characterized. Results show that average cow milk chemical parameters vary within a normal range. They remain primarily linked to the genetic type of cows, the lactation stage, and the conversion of feed concentrates' net energy into milk. Overall milk hygienic quality was poor (APC and Coliforms counts were 100 fold international norms), due essentially to a lack of hygiene and inadequate milking conditions (hands, udder, and teat washing, type of bucket used, dirtiness of cows...). It is suggested that a close monitoring of herd management practices may allow the indirect control of milk quality parameters, thereby avoiding costly analyses of numerous smallholder milk deliveries.

  6. An improved estimator for the hydration of fat-free mass from in vivo measurements subject to additive technical errors.

    PubMed

    Kinnamon, Daniel D; Lipsitz, Stuart R; Ludwig, David A; Lipshultz, Steven E; Miller, Tracie L

    2010-04-01

    The hydration of fat-free mass, or hydration fraction (HF), is often defined as a constant body composition parameter in a two-compartment model and then estimated from in vivo measurements. We showed that the widely used estimator for the HF parameter in this model, the mean of the ratios of measured total body water (TBW) to fat-free mass (FFM) in individual subjects, can be inaccurate in the presence of additive technical errors. We then proposed a new instrumental variables estimator that accurately estimates the HF parameter in the presence of such errors. In Monte Carlo simulations, the mean of the ratios of TBW to FFM was an inaccurate estimator of the HF parameter, and inferences based on it had actual type I error rates more than 13 times the nominal 0.05 level under certain conditions. The instrumental variables estimator was accurate and maintained an actual type I error rate close to the nominal level in all simulations. When estimating and performing inference on the HF parameter, the proposed instrumental variables estimator should yield accurate estimates and correct inferences in the presence of additive technical errors, but the mean of the ratios of TBW to FFM in individual subjects may not.

  7. 40 CFR 1505.2 - Record of decision in cases requiring environmental impact statements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... alternatives based on relevant factors including economic and technical considerations and agency statutory missions. An agency shall identify and discuss all such factors including any essential considerations of...

  8. Handbook of sensor technical characteristics

    NASA Astrophysics Data System (ADS)

    Tanner, S.

    1982-07-01

    Space and terrestrial applications remote sensor systems are described. Each sensor is presented separately. Information is included on its objectives, description, technical characteristics, data products obtained, data archives location, period of operation, and measurement and potential derived parameters. Each sensor is cross indexed.

  9. Goddard Geophysical and Astronomical Observatory

    NASA Technical Reports Server (NTRS)

    Redmond, Jay; Kodak, Charles

    2004-01-01

    This report summarizes the technical parameters and the technical staff of the VLBI system at the fundamental station GGAO. It also gives an overview about the VLBI activities during the previous year. The outlook lists the outstanding tasks to improve the performance of GGAO.

  10. Handbook of sensor technical characteristics

    NASA Technical Reports Server (NTRS)

    Tanner, S.

    1982-01-01

    Space and terrestrial applications remote sensor systems are described. Each sensor is presented separately. Information is included on its objectives, description, technical characteristics, data products obtained, data archives location, period of operation, and measurement and potential derived parameters. Each sensor is cross indexed.

  11. Idaho National Laboratory Annual Report FY 2013 LDRD Project Summaries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dena Tomchak

    The FY 2013 LDRD Annual Report is a compendium of the diverse research performed to develop and ensure the INL’s technical capabilities support the current and future DOE missions and national research priorities. LDRD is essential to INL—it provides a means for the Laboratory to maintain scientific and technical vitality while funding highly innovative, high-risk science and technology research and development (R&D) projects. The program enhances technical capabilities at the Laboratory, providing scientific and engineering staff with opportunities to explore proof-of-principle ideas, advanced studies of innovative concepts, and preliminary technical analyses. Established by Congress in 1991, the LDRD Program provesmore » its benefit each year through new programs, intellectual property, patents, copyrights, national and international awards, and publications.« less

  12. Systematic development of technical textiles

    NASA Astrophysics Data System (ADS)

    Beer, M.; Schrank, V.; Gloy, Y.-S.; Gries, T.

    2016-07-01

    Technical textiles are used in various fields of applications, ranging from small scale (e.g. medical applications) to large scale products (e.g. aerospace applications). The development of new products is often complex and time consuming, due to multiple interacting parameters. These interacting parameters are production process related and also a result of the textile structure and used material. A huge number of iteration steps are necessary to adjust the process parameter to finalize the new fabric structure. A design method is developed to support the systematic development of technical textiles and to reduce iteration steps. The design method is subdivided into six steps, starting from the identification of the requirements. The fabric characteristics vary depending on the field of application. If possible, benchmarks are tested. A suitable fabric production technology needs to be selected. The aim of the method is to support a development team within the technology selection without restricting the textile developer. After a suitable technology is selected, the transformation and correlation between input and output parameters follows. This generates the information for the production of the structure. Afterwards, the first prototype can be produced and tested. The resulting characteristics are compared with the initial product requirements.

  13. 10 CFR 63.114 - Requirements for performance assessment.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Technical Criteria Postclosure Performance Assessment § 63..., hydrology, and geochemistry (including disruptive processes and events) of the Yucca Mountain site, and the... disposal, and provide for the technical basis for parameter ranges, probability distributions, or bounding...

  14. 10 CFR 63.114 - Requirements for performance assessment.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Technical Criteria Postclosure Performance Assessment § 63..., hydrology, and geochemistry (including disruptive processes and events) of the Yucca Mountain site, and the... disposal, and provide for the technical basis for parameter ranges, probability distributions, or bounding...

  15. 10 CFR 63.114 - Requirements for performance assessment.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Technical Criteria Postclosure Performance Assessment § 63..., hydrology, and geochemistry (including disruptive processes and events) of the Yucca Mountain site, and the... disposal, and provide for the technical basis for parameter ranges, probability distributions, or bounding...

  16. 10 CFR 63.114 - Requirements for performance assessment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Technical Criteria Postclosure Performance Assessment § 63..., hydrology, and geochemistry (including disruptive processes and events) of the Yucca Mountain site, and the... disposal, and provide for the technical basis for parameter ranges, probability distributions, or bounding...

  17. 10 CFR 63.114 - Requirements for performance assessment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Technical Criteria Postclosure Performance Assessment § 63..., hydrology, and geochemistry (including disruptive processes and events) of the Yucca Mountain site, and the... disposal, and provide for the technical basis for parameter ranges, probability distributions, or bounding...

  18. Chemometric investigation of light-shade effects on essential oil yield and morphology of Moroccan Myrtus communis L.

    PubMed

    Fadil, Mouhcine; Farah, Abdellah; Ihssane, Bouchaib; Haloui, Taoufik; Lebrazi, Sara; Zghari, Badreddine; Rachiq, Saâd

    2016-01-01

    To investigate the effect of environmental factors such as light and shade on essential oil yield and morphological traits of Moroccan Myrtus communis, a chemometric study was conducted on 20 individuals growing under two contrasting light environments. The study of individual's parameters by principal component analysis has shown that essential oil yield, altitude, and leaves thickness were positively correlated between them and negatively correlated with plants height, leaves length and leaves width. Principal component analysis and hierarchical cluster analysis have also shown that the individuals of each sampling site were grouped separately. The one-way ANOVA test has confirmed the effect of light and shade on essential oil yield and morphological parameters by showing a statistically significant difference between them from the shaded side to the sunny one. Finally, the multiple linear model containing main, interaction and quadratic terms was chosen for the modeling of essential oil yield in terms of morphological parameters. Sun plants have a small height, small leaves length and width, but they are thicker and richer in essential oil than shade plants which have shown almost the opposite. The highlighted multiple linear model can be used to predict essential oil yield in the studied area.

  19. Diagnostics of Technical Condition of Gear Units of Belt Conveyors for the Aggregate of Methods of Nondestructive Testing

    NASA Astrophysics Data System (ADS)

    Kuzin, Evgeny G.; Gerike, Boris L.; Drozdenko, Yuriy V.; Lupiy, Michael G.; Grigoryeva, Natalya V.

    2017-10-01

    The article reviews the issues of complex use of methods of technical diagnostics of gearboxes for belt conveyors, with the aim of creating an effective system of maintenance. The article is showing the results of the evaluation of the technical condition of the drives of belt conveyors based on vibration monitoring and thermal parameters, and analysis of lubricating oil.

  20. Antimicrobial drug residues in milk and meat: causes, concerns, prevalence, regulations, tests, and test performance.

    PubMed

    Mitchell, J M; Griffiths, M W; McEwen, S A; McNab, W B; Yee, A J

    1998-06-01

    This paper presents a historical review of antimicrobial use in food animals, the causes of residues in meat and milk, the types of residues found, their regulation in Canada, tests used for their detection, and test performance parameters, with an emphasis on immunoassay techniques. The development of residue detection methods began shortly after the introduction of antimicrobials to food animal production in the late 1940s. From initial technical concerns expressed by the dairy industry to the present public health and international trade implications, there has been an ongoing need for reliable, sensitive, and economical methods for the detection of antimicrobial residues in food animal products such as milk and meat. Initially there were microbial growth inhibition tests, followed by more sensitive and specific methods based on receptor binding, immunochemical, and chromatographic principle. An understanding of basic test performance parameters and their implications is essential when choosing an analytical strategy for residue testing. While each test format has its own attributes, none test will meet all the required analytical needs. Therefore the use of a tiered or integrated system employing assays designated for screening and confirmation is necessary to ensure that foods containing violative residues are not introduced into the food chain.

  1. Evaluation of peak picking quality in LC-MS metabolomics data.

    PubMed

    Brodsky, Leonid; Moussaieff, Arieh; Shahaf, Nir; Aharoni, Asaph; Rogachev, Ilana

    2010-11-15

    The output of LC-MS metabolomics experiments consists of mass-peak intensities identified through a peak-picking/alignment procedure. Besides imperfections in biological samples and instrumentation, data accuracy is highly dependent on the applied algorithms and their parameters. Consequently, quality control (QC) is essential for further data analysis. Here, we present a QC approach that is based on discrepancies between replicate samples. First, the quantile normalization of per-sample log-signal distributions is applied to each group of biologically homogeneous samples. Next, the overall quality of each replicate group is characterized by the Z-transformed correlation coefficients between samples. This general QC allows a tuning of the procedure's parameters which minimizes the inter-replicate discrepancies in the generated output. Subsequently, an in-depth QC measure detects local neighborhoods on a template of aligned chromatograms that are enriched by divergences between intensity profiles of replicate samples. These neighborhoods are determined through a segmentation algorithm. The retention time (RT)-m/z positions of the neighborhoods with local divergences are indicative of either: incorrect alignment of chromatographic features, technical problems in the chromatograms, or to a true biological discrepancy between replicates for particular metabolites. We expect this method to aid in the accurate analysis of metabolomics data and in the development of new peak-picking/alignment procedures.

  2. Horizontal environmental assessment of building products in relation to the construction products directive (CPD).

    PubMed

    Schiopu, Nicoleta; Jayr, Emmanuel; Méhu, Jacques; Barna, Ligia; Moszkowicz, Pierre

    2007-01-01

    According to the European Construction Products Directive (89/106/EC), construction products must satisfy specified essential requirements (ER). To comply with ER 3, on hygiene, health and environment, the construction works must be designed and built in such a way that they will not be a threat to the hygiene and health of the occupants and neighbours, nor to the environment. Standardised test methods for the release of substances that are hazardous to health and environment need to be developed at the European level. A horizontal approach is considered the best route for such test development and consists of the development of a test method applicable for different products used in a certain scenario (across the fields of different Technical Committees). The work presented here regards the emission of pollutants towards soil and water and has been carried out on monolith products, based on three types of matrices: concrete, wood and metal (zinc). The aim of the work is to study the parameters (nature of leachant, temperature, liquid-to-solid ratio) that could influence the release behaviour of substances in water. The knowledge acquired from these tests will allow the identification of some parameters needed for the development of a horizontal test.

  3. Automatic management system for dose parameters in interventional radiology and cardiology.

    PubMed

    Ten, J I; Fernandez, J M; Vaño, E

    2011-09-01

    The purpose of this work was to develop an automatic management system to archive and analyse the major study parameters and patient doses for fluoroscopy guided procedures performed in cardiology and interventional radiology systems. The X-ray systems used for this trial have the capability to export at the end of the procedure and via e-mail the technical parameters of the study and the patient dose values. An application was developed to query and retrieve from a mail server, all study reports sent by the imaging modality and store them on a Microsoft SQL Server data base. The results from 3538 interventional study reports generated by 7 interventional systems were processed. In the case of some technical parameters and patient doses, alarms were added to receive malfunction alerts so as to immediately take appropriate corrective actions.

  4. Selection of organic process and source indicator substances for the anthropogenically influenced water cycle.

    PubMed

    Jekel, Martin; Dott, Wolfgang; Bergmann, Axel; Dünnbier, Uwe; Gnirß, Regina; Haist-Gulde, Brigitte; Hamscher, Gerd; Letzel, Marion; Licha, Tobias; Lyko, Sven; Miehe, Ulf; Sacher, Frank; Scheurer, Marco; Schmidt, Carsten K; Reemtsma, Thorsten; Ruhl, Aki Sebastian

    2015-04-01

    An increasing number of organic micropollutants (OMP) is detected in anthropogenically influenced water cycles. Source control and effective natural and technical barriers are essential to maintain a high quality of drinking water resources under these circumstances. Based on the literature and our own research this study proposes a limited number of OMP that can serve as indicator substances for the major sources of OMP, such as wastewater treatment plants, agriculture and surface runoff. Furthermore functional indicators are proposed that allow assessment of the proper function of natural and technical barriers in the aquatic environment, namely conventional municipal wastewater treatment, advanced treatment (ozonation, activated carbon), bank filtration and soil aquifer treatment as well as self-purification in surface water. These indicator substances include the artificial sweetener acesulfame, the anti-inflammatory drug ibuprofen, the anticonvulsant carbamazepine, the corrosion inhibitor benzotriazole and the herbicide mecoprop among others. The chemical indicator substances are intended to support comparisons between watersheds and technical and natural processes independent of specific water cycles and to reduce efforts and costs of chemical analyses without losing essential information. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Technical variables in high-throughput miRNA expression profiling: much work remains to be done.

    PubMed

    Nelson, Peter T; Wang, Wang-Xia; Wilfred, Bernard R; Tang, Guiliang

    2008-11-01

    MicroRNA (miRNA) gene expression profiling has provided important insights into plant and animal biology. However, there has not been ample published work about pitfalls associated with technical parameters in miRNA gene expression profiling. One source of pertinent information about technical variables in gene expression profiling is the separate and more well-established literature regarding mRNA expression profiling. However, many aspects of miRNA biochemistry are unique. For example, the cellular processing and compartmentation of miRNAs, the differential stability of specific miRNAs, and aspects of global miRNA expression regulation require specific consideration. Additional possible sources of systematic bias in miRNA expression studies include the differential impact of pre-analytical variables, substrate specificity of nucleic acid processing enzymes used in labeling and amplification, and issues regarding new miRNA discovery and annotation. We conclude that greater focus on technical parameters is required to bolster the validity, reliability, and cultural credibility of miRNA gene expression profiling studies.

  6. [Application of ultrasound counter currentextraction in patent of traditional Chinese medicine].

    PubMed

    Miao, Yan-ni; Wu, Bin; Yue, Xue-lian

    2015-07-01

    The patent information of ultrasound countercurrent extraction used in traditional Chinese medicine was analyzed in this paper by the samples from Derwent World Patent Database (DWPI) and the Chinese Patent Abstracts Database (CNABS). The application of ultrasound countercurrent was discussed with the patent applicant,the amount of the annual distribution, and the pharmaceutical raw materials and other aspects. While the technical parameters published in the patent was deeply analyzed, such as material crushing, extraction solvent, extraction time and temperature, extraction equipment and ultrasonic frequency. Thought above research, various technical parameters of ultrasound countercurrent extraction used in traditional Chinese was summarize. The analysis conclusion of the paper can be used in discovering the technical advantages, optimizing extraction conditions, and providing a reference to extraction technological innovation of traditional Chinese medicine.

  7. FY 2014 LDRD Annual Report Project Summaries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tomchak, Dena

    The FY 2014 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support future DOE missions and national research priorities. LDRD is essential to INL - it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enahnces technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development.

  8. Addressing tomorrow's DMO technical challenges today

    NASA Astrophysics Data System (ADS)

    Milligan, James R.

    2009-05-01

    Distributed Mission Operations (DMO) is essentially a type of networked training that pulls in participants from all the armed services and, increasingly, allies to permit them to "game" and rehearse highly complex campaigns, using a mix of local, distant, and virtual players. The United States Air Force Research Laboratory (AFRL) is pursuing Science and Technology (S&T) solutions to address technical challenges associated with distributed communications and information management as DMO continues to progressively scale up the number, diversity, and geographic dispersal of participants in training and rehearsal exercises.

  9. A Simple and Low-Cost Monitoring System to Investigate Environmental Conditions in a Biological Research Laboratory.

    PubMed

    Gurdita, Akshay; Vovko, Heather; Ungrin, Mark

    2016-01-01

    Basic equipment such as incubation and refrigeration systems plays a critical role in nearly all aspects of the traditional biological research laboratory. Their proper functioning is therefore essential to ensure reliable and repeatable experimental results. Despite this fact, in many academic laboratories little attention is paid to validating and monitoring their function, primarily due to the cost and/or technical complexity of available commercial solutions. We have therefore developed a simple and low-cost monitoring system that combines a "Raspberry Pi" single-board computer with USB-connected sensor interfaces to track and log parameters such as temperature and pressure, and send email alert messages as appropriate. The system is controlled by open-source software, and we have also generated scripts to automate software setup so that no background in programming is required to install and use it. We have applied it to investigate the behaviour of our own equipment, and present here the results along with the details of the monitoring system used to obtain them.

  10. FUJIFILM X10 white orbs and DeOrbIt

    NASA Astrophysics Data System (ADS)

    Dietz, Henry Gordon

    2013-01-01

    The FUJIFILM X10 is a high-end enthusiast compact digital camera using an unusual sensor design. Unfortunately, upon its Fall 2011 release, the camera quickly became infamous for the uniquely disturbing "white orbs" that often appeared in areas where the sensor was saturated. FUJIFILM's first attempt at a fix was firmware released on February 25, 2012 if it had little effect. In April 2012, a sensor replacement essentially solved the problem. This paper explores the "white orb" phenomenon in detail. After FUJIFILM's attempt at a firmware fix failed, the author decided to create a post-processing tool that automatically could repair existing images. DeOrbIt was released as a free tool on March 7, 2012. To better understand the problem and how to fix it, the WWW form version of the tool logs images, processing parameters, and evaluations by users. The current paper describes the technical problem, the novel computational photography methods used by DeOrbit to repair affected images, and the public perceptions revealed by this experiment.

  11. Influence of implantable hearing aids and neuroprosthesison music perception.

    PubMed

    Rahne, Torsten; Böhme, Lars; Götze, Gerrit

    2012-01-01

    The identification and discrimination of timbre are essential features of music perception. One dominating parameter within the multidimensional timbre space is the spectral shape of complex sounds. As hearing loss interferes with the perception and enjoyment of music, we approach the individual timbre discrimination skills in individuals with severe to profound hearing loss using a cochlear implant (CI) and normal hearing individuals using a bone-anchored hearing aid (Baha). With a recent developed behavioral test relying on synthetically sounds forming a spectral continuum, the timbre difference was changed adaptively to measure the individual just noticeable difference (JND) in a forced-choice paradigm. To explore the differences in timbre perception abilities caused by the hearing mode, the sound stimuli were varied in their fundamental frequency, thus generating different spectra which are not completely covered by a CI or Baha system. The resulting JNDs demonstrate differences in timbre perception between normal hearing individuals, Baha users, and CI users. Beside the physiological reasons, also technical limitations appear as the main contributing factors.

  12. Performance evaluation of traffic sensing and control devices : [technical summary].

    DOT National Transportation Integrated Search

    2011-01-01

    High quality sensing and control systems are essential for providing efficient signalized arterial operations. INDOT operates over 2600 traffic signal controllers, approximately 2000 of which use some form of vehicle detection. The private sector con...

  13. Collecting and Reporting P2 Results: Regional Measurement Guidance

    EPA Pesticide Factsheets

    Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This PDF defines some terms of P2 measurement.

  14. Technical considerations in the preparation and dispensing of chemotherapy.

    PubMed

    Peters, B G

    1995-01-01

    The safe handling of cytotoxic agents is intimately related to the technical aspects of drug preparation, dispensing, and administration. The appropriate equipment, supplies, protective clothing, and waste disposal systems must be available to the health care worker who is called upon to prepare cytotoxic agents. In addition, the health care worker must be adequately trained in and familiar with the safe use of these products and equipment and the preparation techniques or manipulations necessary during cytotoxic drug compounding. The article describes in detail and reviews the technical considerations, such as aseptic technique, proper use of the biological safety cabinet, gowning and gloving, labeling, and waste disposal, that are essential to the safe preparation and dispensing of chemotherapy.

  15. A systems approach to implementation of eLearning in medical education: five MEPI schools' journeys.

    PubMed

    Vovides, Yianna; Chale, Selamawit Bedada; Gadhula, Rumbidzayi; Kebaetse, Masego B; Nigussie, Netsanet Animut; Suleman, Fatima; Tibyampansha, Dativa; Ibrahim, Glory Ramadhan; Ntabaye, Moshi; Frehywot, Seble; Nkomazana, Oathokwa

    2014-08-01

    How should eLearning be implemented in resource-constrained settings? The introduction of eLearning at four African medical schools and one school of pharmacy, all part of the Medical Education Partnership Initiative (MEPI) eLearning Technical Working Group, highlighted the need for five factors essential for successful and sustainable implementation: institutional support; faculty engagement; student engagement; technical expertise; and infrastructure and support systems. All five MEPI schools reported strengthening technical expertise, infrastructure, and support systems; four schools indicated that they were also successful in developing student engagement; and three reported making good progress in building institutional support. Faculty engagement was the one core component that all five schools needed to enhance.

  16. Analysis of Physiological, Technical, and Tactical Analysis during a Friendly Football Match of Elite U19.

    PubMed

    Ortega, Juan Ignacio; Evangelio, Carlos; Clemente, Filipe Manuel; Martins, Fernando Manuel Lourenço; González-Víllora, Sixto

    2016-06-16

    The main objective was to analyze a friendly match of youth elite soccer players identifying the variance of tactical and physiological response parameters during the game. In addition, detecting the impact of both halves on player performance. For the purposes of this study twenty-two U19 players were analyzed playing 11v11. Activity profile, heart rate (HR and HRmax), grouped in five different zones were analyzed via Bluetooth technology, technical performance was analyzed by the Team Sport Assessment Procedure (TSAP), and tactical performance was measured by Social Network Analysis. A comparison of heart rate responses showed significant main effects in the halves (p = 0.001; η p 2 = 0.623). A comparison between tactical position and technical performance had significant main effects (p = 0.001; η p 2 = 0.390). Tactical position showed statistically significant effects on tactical prominence (p = 0.002; η p 2 = 0.296). Therefore, fatigue is a component distinguished in technical/tactical parameters, such as volume of play and efficiency index. Results suggest that fatigue effects may constrain technical performance and, for that reason, the use of instruments to monitor the fatigue effect during matches may be suggested.

  17. Analysis of Physiological, Technical, and Tactical Analysis during a Friendly Football Match of Elite U19

    PubMed Central

    Ortega, Juan Ignacio; Evangelio, Carlos; Clemente, Filipe Manuel; Martins, Fernando Manuel Lourenço; González-Víllora, Sixto

    2016-01-01

    The main objective was to analyze a friendly match of youth elite soccer players identifying the variance of tactical and physiological response parameters during the game. In addition, detecting the impact of both halves on player performance. For the purposes of this study twenty-two U19 players were analyzed playing 11v11. Activity profile, heart rate (HR and HRmax), grouped in five different zones were analyzed via Bluetooth technology, technical performance was analyzed by the Team Sport Assessment Procedure (TSAP), and tactical performance was measured by Social Network Analysis. A comparison of heart rate responses showed significant main effects in the halves (p = 0.001; ηp2 = 0.623). A comparison between tactical position and technical performance had significant main effects (p = 0.001; ηp2 = 0.390). Tactical position showed statistically significant effects on tactical prominence (p = 0.002; ηp2 = 0.296). Therefore, fatigue is a component distinguished in technical/tactical parameters, such as volume of play and efficiency index. Results suggest that fatigue effects may constrain technical performance and, for that reason, the use of instruments to monitor the fatigue effect during matches may be suggested. PMID:29910283

  18. Assessment of rotation thromboelastometry parameters in patients with essential thrombocythemia at diagnosis and after hydroxyurea therapy.

    PubMed

    Treliński, Jacek; Okońska, Marta; Robak, Marta; Chojnowski, Krzysztof

    2016-03-01

    Patients with essential thrombocythemia suffer from thrombotic complications that are the main source of mortality. Due to its complex pathogenesis, no existing single laboratory method is able to identify the patients at highest risk for developing thrombosis. Twenty patients with essential thrombocythemia at diagnosis, 15 healthy volunteers and 20 patients treated with hydroxyurea were compared with regard to certain rotation thromboelastometry parameters. Clotting time (CT), clot formation time (CFT), α-angle, and maximum clot firmness (MCF) were assessed by using the INTEM, EXTEM, FIBTEM, and NATEM tests. Patients with essential thrombocythemia at diagnosis demonstrated significantly higher mean platelet count and markedly lower mean red blood count than controls. CT and CFT readings were found to be markedly lower in essential thrombocythemia patients at diagnosis than in the control group according to the EXTEM test. Patients at diagnosis had markedly lower CT values (EXTEM, FIBTEM) than patients on hydroxyurea therapy. Alpha angle values were markedly higher in essential thrombocythemia patients at diagnosis than in controls, according to the EXTEM, FIBTEM and NATEM tests. MCF readings were significantly higher in essential thrombocythemia patients at diagnosis than in controls according to EXTEM, INTEM, FIBTEM, and NATEM tests. Patients on hydroxyurea therapy had markedly lower MCF values according to EXTEM test than patients at diagnosis. Patients with essential thrombocythemia demonstrate a prothrombotic state at the time of diagnosis, which is reflected in changes by certain rotation thromboelastometry parameters. The hydroxyurea therapy induces downregulation of the prothrombotic features seen in essential thrombocythemia patients at diagnosis.

  19. New Advances in SuperConducting Materials

    ScienceCinema

    None

    2018-05-23

    Superconducting materials will transform the world's electrical infrastructure, saving billions of dollars once the technical details and installation are in place. At Los Alamos National Laboratory, new materials science concepts are bringing this essential technology closer to widespread industrial use.

  20. Guidelines to group practice. Fédération Dentaire Internationale. Technical Report No. 22.

    PubMed

    1985-09-01

    This report reviews the types of group practice, the essential financial arrangements and the management procedures involved. The advantages and disadvantages of group practice to the dentist and the patient are reviewed.

  1. Demonstration of Essential Reliability Services by Utility-Scale Solar

    Science.gov Websites

    control (AGC) * Primary frequency control * Active power ramp rate control * Voltage regulation and reactive power control. See a list of Questions and Answers from the webinar. Read the NREL technical

  2. The Use of Dynamic Stochastic Social Behavior Models to Produce Likelihood Functions for Risk Modeling of Proliferation and Terrorist Attacks

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Young, Jonathan; Thompson, Sandra E.; Brothers, Alan J.

    The ability to estimate the likelihood of future events based on current and historical data is essential to the decision making process of many government agencies. Successful predictions related to terror events and characterizing the risks will support development of options for countering these events. The predictive tasks involve both technical and social component models. The social components have presented a particularly difficult challenge. This paper outlines some technical considerations of this modeling activity. Both data and predictions associated with the technical and social models will likely be known with differing certainties or accuracies – a critical challenge is linkingmore » across these model domains while respecting this fundamental difference in certainty level. This paper will describe the technical approach being taken to develop the social model and identification of the significant interfaces between the technical and social modeling in the context of analysis of diversion of nuclear material.« less

  3. Technical review of the da Vinci surgical telemanipulator.

    PubMed

    Freschi, C; Ferrari, V; Melfi, F; Ferrari, M; Mosca, F; Cuschieri, A

    2013-12-01

    The da Vinci robotic surgical telemanipulator has been utilized in several surgical specialties for varied procedures, and the users' experiences have been widely published. To date, no detailed system technical analyses have been performed. A detailed review was performed of all publications and patents about the technical aspects of the da Vinci robotic system. Published technical literature on the da Vinci system highlight strengths and weaknesses of the robot design. While the system facilitates complex surgical operations and has a low malfunction rate, the lack of haptic (especially tactile) feedback and collisions between the robotic arms remain the major limitations of the system. Accurate, preplanned positioning of access ports is essential. Knowledge of the technical aspects of the da Vinci robot is important for optimal use. We confirmed the excellent system functionality and ease of use for surgeons without an engineering background. Research and development of the surgical robot has been predominant in the literature. Future trends address robot miniaturization and intelligent control design. Copyright © 2012 John Wiley & Sons, Ltd.

  4. 76 FR 54510 - Notice of Availability of Proposed Models for Plant-Specific Adoption of Technical Specifications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-01

    ... Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-500, Revision 2... Specifications Task Force (TSTF) Traveler TSTF- 500, Revision 2, ``DC Electrical Rewrite--Update to TSTF-360....8.6, ``Battery Cell Parameters.'' Additionally, a new Administrative Controls program, titled...

  5. Goddard Geophysical and Astronomical Observatory

    NASA Technical Reports Server (NTRS)

    Redmond, Jay; Kodak, Charles

    2001-01-01

    This report summarizes the technical parameters and the technical staff of the Very Long Base Interferometry (VLBI) system at the fundamental station Goddard Geophysical and Astronomical Observatory (GGAO). It also gives an overview about the VLBI activities during the previous year. The outlook lists the outstanding tasks to improve the performance of GGAO.

  6. Healthy Water Healthy People Field Monitoring Guide

    ERIC Educational Resources Information Center

    Project WET Foundation, 2003

    2003-01-01

    This 100-page manual serves as a technical reference for the "Healthy Water, Healthy People Water Quality Educators Guide" and the "Healthy Water Healthy People Testing Kits". Yielding in-depth information about ten water quality parameters, it answers questions about water quality testing using technical overviews, data interpretation guidelines,…

  7. [Analysis of the technical efficiency of hospitals in the Spanish National Health Service].

    PubMed

    Pérez-Romero, Carmen; Ortega-Díaz, M Isabel; Ocaña-Riola, Ricardo; Martín-Martín, José Jesús

    To analyse the technical efficiency and productivity of general hospitals in the Spanish National Health Service (NHS) (2010-2012) and identify explanatory hospital and regional variables. 230 NHS hospitals were analysed by data envelopment analysis for overall, technical and scale efficiency, and Malmquist index. The robustness of the analysis is contrasted with alternative input-output models. A fixed effects multilevel cross-sectional linear model was used to analyse the explanatory efficiency variables. The average rate of overall technical efficiency (OTE) was 0.736 in 2012; there was considerable variability by region. Malmquist index (2010-2012) is 1.013. A 23% variability in OTE is attributable to the region in question. Statistically significant exogenous variables (residents per 100 physicians, aging index, average annual income per household, essential public service expenditure and public health expenditure per capita) explain 42% of the OTE variability between hospitals and 64% between regions. The number of residents showed a statistically significant relationship. As regards regions, there is a statistically significant direct linear association between OTE and annual income per capita and essential public service expenditure, and an indirect association with the aging index and annual public health expenditure per capita. The significant room for improvement in the efficiency of hospitals is conditioned by region-specific characteristics, specifically aging, wealth and the public expenditure policies of each one. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  8. Performance of buried pipe installation : technical summary.

    DOT National Transportation Integrated Search

    2010-05-01

    The goal of this research project was to determine the effects of geometric and mechanical parameters characterizing the soil-structure interaction developed in a buried pipe installation. Parameters such as pipe ring stiff ness, bedding thickness, t...

  9. Studies in remotely sensed geophysical parameter retrieval and analysis

    NASA Technical Reports Server (NTRS)

    Perkey, Donald J.

    1993-01-01

    This report describes Universities Space Research Association (USRA) activities in support of the Geophysical Parameter Retrieval and Analysis studies. Specifically it addresses personnel assigned to the effort, travel, consultant participants, technical progress, and contract spending.

  10. Technical aspects of contrast-enhanced ultrasound (CEUS) examinations: tips and tricks.

    PubMed

    Greis, C

    2014-01-01

    Ultrasound contrast agents have substantially extended the clinical value of ultrasound, allowing the assessment of blood flow and distribution in real-time down to microcapillary level. Selective imaging of contrast agent signals requires a contrast-specific imaging mode on the ultrasound scanner, allowing real-time separation of tissue and contrast agent signals. The creation of a contrast image requires a specific interaction between the insonated ultrasound wave and the contrast agent microbubbles, leading to persistent oscillation of the bubbles. Several technical and procedural parameters have a significant influence on the quality of CEUS images and should be controlled carefully to obtain good image quality and a reliable diagnosis. Achieving the proper balance between the respective parameters is a matter of technical knowledge and experience. Appropriate training and education should be mandatory for every investigator performing CEUS examinations.

  11. The Round Table on Computer Performance Metrics for Export Control: Discussions and Results

    DTIC Science & Technology

    1997-12-01

    eligibility, use the CTP parameter to the exclusion of other technical parameters for computers classified under ECCN 4A003.a, .b and .c, except of...parameters specified as Missile Technology (MT) concerns or 4A003.e (equipment performing analog-to-digital conversions exceeding the limits in ECCN

  12. Non-technical skills assessment for prelicensure nursing students: An integrative review.

    PubMed

    Pires, Sara; Monteiro, Sara; Pereira, Anabela; Chaló, Daniela; Melo, Elsa; Rodrigues, Alexandre

    2017-11-01

    In nursing, non-technical skills are recognized as playing an important role to increase patient safety and successful clinical outcomes (Pearson and McLafferty, 2011). Non-technical skills are cognitive and social resource skills that complement technical skills and contribute to safe and efficient task performance (Flin et al., 2008). In order to effectively provide non-technical skills training, it is essential to have an instrument to measure these skills. An online search was conducted. Articles were selected if they referred to and/or described instruments assessing non-technical skills for nurses and/or prelicensure nursing students in educational, clinical and/or simulated settings with validation evidence (inclusion criteria). Of the 53 articles located, 26 met the inclusion criteria. Those referred to and/or described 16 instruments with validation evidence developed to assess non-technical skills in multidisciplinary teams including nurses. Although articles have shown 16 valid and reliable instruments, to our knowledge, no instrument has been published or developed and validated for the assessment of non-technical skills of only nurses in general, relevant for use in high-fidelity simulation-based training for prelicensure nursing students. Therefore, there is a need for the development of such an instrument. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Technical Steps to Support Nuclear Arsenal Downsizing: A Report by the APS Panel on Public Affairs

    DTIC Science & Technology

    2010-02-01

    play a critical role in advancing the US plan to balance deter- rence with downsizing the US nuclear arsenal. In particular, S&T are essential to enable...nuclear-armed nations must be assured that they will continue to be able to meet those critical security needs. While individual nuclear-armed...steps are essential to progress towards the eventual elimination of nuclear arsenals. Science and technology (S&T) will play a critical role in

  14. Single and combined effects of vitamin C and oregano essential oil in diet, on growth performance, and blood parameters of broiler chicks reared under heat stress condition

    NASA Astrophysics Data System (ADS)

    Ghazi, Shahab; Amjadian, Tahere; Norouzi, Shokufeh

    2015-08-01

    This study was conducted to evaluate the effects of adding vitamin C (VC), oregano essential oil (OR), or their combination in diet, on growth performance, and blood parameters of broiler chicks reared under heat stress (HS) condition (38 °C). One-day-old 240 male broilers were randomly assigned to four treatment groups, six replicates of ten birds each. The birds were fed with either a basal diet or a basal diet supplemented with either 200 mg L-ascorbic acid/kg of diet, 250 mg of oregano essential oil/kg of diet, or 200 mg L-ascorbic acid plus 250 mg of oregano essential oil/kg of diet. Average daily feed intake (ADFI), average daily gain (ADG), and feed conversion ratio (FCR) were obtained for 42 days of age and at the end of the experiment (day 42); birds were bled to determine some blood parameters and weighted for final body weight (BW). Feeding birds with diets supplemented with oregano essential oil and vitamin C in a single or combined form increased ADG ( P > 0.05). Also BW increased and feed efficiency decreased ( P < 0.05) in the birds fed with diets including VC and OR (in a single or combined form), compared to those fed the basal diet. ADFI was not significantly influenced by dietary oregano essential oil and vitamin C ( P > 0.05). Supplemental oregano essential oil and vitamin C in a combined form decreased the serum concentration of corticosterone, triglycerides, glucose, and MDA ( P < 0.05) compared with other groups. An increase in the serum concentrations of vitamin C were seen in broiler chicks supplemented with vitamin C. From the results of the present experiment, it can be concluded that diet supplementation by combined oregano essential oil and vitamin C could have beneficial effects on some blood parameters of broiler chicks reared under heat stress condition.

  15. Single and combined effects of vitamin C and oregano essential oil in diet, on growth performance, and blood parameters of broiler chicks reared under heat stress condition.

    PubMed

    Ghazi, Shahab; Amjadian, Tahere; Norouzi, Shokufeh

    2015-08-01

    This study was conducted to evaluate the effects of adding vitamin C (VC), oregano essential oil (OR), or their combination in diet, on growth performance, and blood parameters of broiler chicks reared under heat stress (HS) condition (38 °C). One-day-old 240 male broilers were randomly assigned to four treatment groups, six replicates of ten birds each. The birds were fed with either a basal diet or a basal diet supplemented with either 200 mg L-ascorbic acid/kg of diet, 250 mg of oregano essential oil/kg of diet, or 200 mg L-ascorbic acid plus 250 mg of oregano essential oil/kg of diet. Average daily feed intake (ADFI), average daily gain (ADG), and feed conversion ratio (FCR) were obtained for 42 days of age and at the end of the experiment (day 42); birds were bled to determine some blood parameters and weighted for final body weight (BW). Feeding birds with diets supplemented with oregano essential oil and vitamin C in a single or combined form increased ADG (P > 0.05). Also BW increased and feed efficiency decreased (P < 0.05) in the birds fed with diets including VC and OR (in a single or combined form), compared to those fed the basal diet. ADFI was not significantly influenced by dietary oregano essential oil and vitamin C (P > 0.05). Supplemental oregano essential oil and vitamin C in a combined form decreased the serum concentration of corticosterone, triglycerides, glucose, and MDA (P < 0.05) compared with other groups. An increase in the serum concentrations of vitamin C were seen in broiler chicks supplemented with vitamin C. From the results of the present experiment, it can be concluded that diet supplementation by combined oregano essential oil and vitamin C could have beneficial effects on some blood parameters of broiler chicks reared under heat stress condition.

  16. Validation of Essential Acoustic Parameters for Highly Urgent In-Vehicle Collision Warnings.

    PubMed

    Lewis, Bridget A; Eisert, Jesse L; Baldwin, Carryl L

    2018-03-01

    Objective The aim of this study was to validate the importance of key acoustic criteria for use as in-vehicle forward collision warning (FCW) systems. Background Despite recent advances in vehicle safety, automobile crashes remain one of the leading causes of death. As automation allows for more control of noncritical functions by the vehicle, the potential for disengagement and distraction from the driving task also increases. It is, therefore, as important as ever that in-vehicle safety-critical interfaces are intuitive and unambiguous, promoting effective collision avoidance responses upon first exposure even under divided-attention conditions. Method The current study used a driving simulator to assess the effectiveness of two warnings, one that met all essential acoustic parameters, one that met only some essential parameters, and a no-warning control in the context of a lead vehicle-following task in conjunction with a cognitive distractor task and collision event. Results Participants receiving an FCW comprising five essential acoustic components had improved collision avoidance responses relative to a no-warning condition and an FCW missing essential elements on their first exposure. Responses to a consistently good warning (GMU Prime) improved with subsequent exposures, whereas continued exposure to the less optimal FCW (GMU Sub-Prime) resulted in poorer performance even relative to receiving no warning at all. Conclusions This study provides support for previous warning design studies and for the validity of five key acoustic parameters essential for the design of effective in-vehicle FCWs. Application Results from this study have implications for the design of auditory FCWs and in-vehicle display design.

  17. 78 FR 72840 - Drug Products That Present Demonstrable Difficulties for Compounding Under Sections 503A and 503B...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-04

    ... equipment that could affect drug safety or effectiveness? 6. Training Is specialized, highly technical training essential to ensure proper compounding of the drug product? 7. Testing and Quality Assurance Is...

  18. Evaluation of generic and branded herbicides : technical report.

    DOT National Transportation Integrated Search

    2015-03-01

    As with other generic brand products in the marketplace, generic herbicides often have a lower initial product cost than : their brand-name counterparts. While the purchase price of herbicides is important to TxDOT, it is essential to look at : more ...

  19. Autonomous dial-a-ride transit. Part 1, technical overview

    DOT National Transportation Integrated Search

    1998-11-01

    Is autonomous-dial-a-ride (ADART) and idea whose time has come with the advent of technologies. This report describes the essential features of an experimental ADART service and establishes a context for ADART implementation based on urban transit in...

  20. Citrus essential oils and their influence on the anaerobic digestion process: an overview.

    PubMed

    Ruiz, B; Flotats, X

    2014-11-01

    Citrus waste accounts for more than half of the whole fruit when processed for juice extraction. Among valorisation possibilities, anaerobic digestion for methane generation appears to be the most technically feasible and environmentally friendly alternative. However, citrus essential oils can inhibit this biological process. In this paper, the characteristics of citrus essential oils, as well as the mechanisms of their antimicrobial effects and potential adaptation mechanisms are reviewed. Previous studies of anaerobic digestion of citrus waste under different conditions are presented; however, some controversy exists regarding the limiting dosage of limonene for a stable process (24-192 mg of citrus essential oil per liter of digester and day). Successful strategies to avoid process inhibition by citrus essential oils are based either on recovery or removal of the limonene, by extraction or fungal pre-treatment respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Statistical Analysis of Hurst Exponents of Essential/Nonessential Genes in 33 Bacterial Genomes

    PubMed Central

    Liu, Xiao; Wang, Baojin; Xu, Luo

    2015-01-01

    Methods for identifying essential genes currently depend predominantly on biochemical experiments. However, there is demand for improved computational methods for determining gene essentiality. In this study, we used the Hurst exponent, a characteristic parameter to describe long-range correlation in DNA, and analyzed its distribution in 33 bacterial genomes. In most genomes (31 out of 33) the significance levels of the Hurst exponents of the essential genes were significantly higher than for the corresponding full-gene-set, whereas the significance levels of the Hurst exponents of the nonessential genes remained unchanged or increased only slightly. All of the Hurst exponents of essential genes followed a normal distribution, with one exception. We therefore propose that the distribution feature of Hurst exponents of essential genes can be used as a classification index for essential gene prediction in bacteria. For computer-aided design in the field of synthetic biology, this feature can build a restraint for pre- or post-design checking of bacterial essential genes. Moreover, considering the relationship between gene essentiality and evolution, the Hurst exponents could be used as a descriptive parameter related to evolutionary level, or be added to the annotation of each gene. PMID:26067107

  2. Influence of characteristics of time series on short-term forecasting error parameter changes in real time

    NASA Astrophysics Data System (ADS)

    Klevtsov, S. I.

    2018-05-01

    The impact of physical factors, such as temperature and others, leads to a change in the parameters of the technical object. Monitoring the change of parameters is necessary to prevent a dangerous situation. The control is carried out in real time. To predict the change in the parameter, a time series is used in this paper. Forecasting allows one to determine the possibility of a dangerous change in a parameter before the moment when this change occurs. The control system in this case has more time to prevent a dangerous situation. A simple time series was chosen. In this case, the algorithm is simple. The algorithm is executed in the microprocessor module in the background. The efficiency of using the time series is affected by its characteristics, which must be adjusted. In the work, the influence of these characteristics on the error of prediction of the controlled parameter was studied. This takes into account the behavior of the parameter. The values of the forecast lag are determined. The results of the research, in the case of their use, will improve the efficiency of monitoring the technical object during its operation.

  3. Laboratory Directed Research and Development FY-10 Annual Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dena Tomchak

    2011-03-01

    The FY 2010 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support the future DOE missions and national research priorities. LDRD is essential to the INL -- it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enhances technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development.

  4. Is the learning curve endless? One surgeon's experience with robotic prostatectomy

    NASA Astrophysics Data System (ADS)

    Patel, Vipul; Thaly, Rahul; Shah, Ketul

    2007-02-01

    Introduction: After performing 1,000 robotic prostatectomies we reflected back on our experience to determine what defined the learning curve and the essential elements that were the keys to surmounting it. Method: We retrospectively assessed our experience to attempt to define the learning curve(s), key elements of the procedure, technical refinements and changes in technology that facilitated our progress. Result: The initial learning curve to achieve basic competence and the ability to smoothly perform the procedure in less than 4 hours with acceptable outcomes was approximately 25 cases. A second learning curve was present between 75-100 cases as we approached more complicated patients. At 200 cases we were comfortably able to complete the procedure routinely in less than 2.5 hours with no specific step of the procedure hindering our progression. At 500 cases we had the introduction of new instrumentation (4th arm, biopolar Maryland, monopolar scissors) that changed our approach to the bladder neck and neurovascular bundle dissection. The most challenging part of the procedure was the bladder neck dissection. Conclusion: There is no single parameter that can be used to assess or define the learning curve. We used a combination of factors to make our subjective definition this included: operative time, smoothness of technical progression during the case along with clinical outcomes. The further our case experience progressed the more we expected of our outcomes, thus we continually modified our technique and hence embarked upon yet a new learning curve.

  5. Farm-economic analysis of reducing antimicrobial use whilst adopting improved management strategies on farrow-to-finish pig farms.

    PubMed

    Rojo-Gimeno, Cristina; Postma, Merel; Dewulf, Jeroen; Hogeveen, Henk; Lauwers, Ludwig; Wauters, Erwin

    2016-07-01

    Due to increasing public health concerns that food animals could be reservoirs for antibiotic resistant organisms, calls for reduced current antibiotic use on farms are growing. Nevertheless, it is challenging for farmers to perform this reduction without negatively affecting technical and economic performance. As an alternative, improved management practices based on biosecurity and vaccinations have been proven useful to reduce antimicrobial use without lowering productivity, but issues with insufficient experimental design possibilities have hindered economic analysis. In the present study a quasi-experimental approach was used for assessing the economic impact of reduction of antimicrobial use coupled with improved management strategies, particularly biosecurity strategies. The research was performed on farrow-to-finish pig farms in Flanders (northern region of Belgium). First, to account for technological progress and to avoid selection bias, propensity score analysis was used to compare data on technical parameters. The treatment group (n=48) participated in an intervention study whose aim was to improve management practices to reduce the need for use of antimicrobials. Before and after the change in management, data were collected on the technical parameters, biosecurity status, antimicrobial use, and vaccinations. Treated farms were matched without replacement with control farms (n=69), obtained from the Farm Accountancy Data Network, to estimate the difference in differences (DID) of the technical parameters. Second, the technical parameters' DID, together with the estimated costs of the management intervention and the price volatility of the feed, meat of the finisher pigs, and piglets served as a basis for modelling the profit of 11 virtual farrow-to-finish pig farms representative of the Flemish sector. Costs incurred by new biosecurity measures (median +€3.96/sow/year), and new vaccinations (median €0.00/sow/year) did not exceed the cost reduction achieved by lowering the use of antimicrobials (median -€7.68/sow/year). No negative effect on technical parameters was observed and mortality of the finishers was significantly reduced by -1.1%. Even after a substantial reduction of the antimicrobial treatments, the difference of the enterprise profit increased by +€2.67/finisher pig/year after implementing the interventions. This result proved to be robust after stochastic modelling of input and output price volatility. The results of this study can be used by veterinarians and other stakeholders to incentivise managers of farrow-to-finish operations to use biosecurity practices as a cost-effective way to reduce antimicrobial use. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. MCFire model technical description

    Treesearch

    David R. Conklin; James M. Lenihan; Dominique Bachelet; Ronald P. Neilson; John B. Kim

    2016-01-01

    MCFire is a computer program that simulates the occurrence and effects of wildfire on natural vegetation, as a submodel within the MC1 dynamic global vegetation model. This report is a technical description of the algorithms and parameter values used in MCFire, intended to encapsulate its design and features a higher level that is more conceptual than the level...

  7. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wright, F.M. Jr.; Best, D.A.; Clarke, R.T.

    The need for even more efficient reservoir characterization and management has forced a change in the way Mobil Oil provides technical support to its production operations. We`ve learned that to be successful, a good understanding of the reservoir is essential. This includes an understanding of the technical and business significance of reservoir heterogeneities at different stages of field development. A multi-disciplinary understanding of the business of integrated reservoir characterization is essential and to facilitate this understanding, Mobil has developed a highly successful {open_quotes}Reservoir Characterization Field Seminar{close_quotes}. Through specific team based case studies that incorporate outcrop examples and data the programmore » provides participants the opportunity to explore historic and alternative approaches to reservoir description, characterization and management. We explore appropriate levels and timing of data gathering, technology applications, risk assessment and management practices at different stages of field development. The case studies presented throughout the course are a unique element of the program which combine real life and hypothetical problem sets that explore how different technical disciplines interact, the approaches to a problem solving they use, the assumptions and uncertainties contained in their contributions and the impact those conclusions may have on other disciplines involved in the overall reservoir management process. The team building aspect of the course was an added bonus.« less

  8. On Interpreting the Parameters for Any Item Response Model

    ERIC Educational Resources Information Center

    Thissen, David

    2009-01-01

    Maris and Bechger's article is an exercise in technical virtuosity and provides much to be learned by students of psychometrics. In this commentary, the author begins with making two observations. The first is that the title, "On Interpreting the Model Parameters for the Three Parameter Logistic Model," belies the generality of parts of Maris and…

  9. Electromechanical Componentry. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Lindemann, Don

    This training module on electromechanical components contains 10 units for a two-year vocational program packaging system equipment control course at Wisconsin Indianhead Technical College. This module describes the functions of electromechanical devices essential for understanding input/output devices for Programmable Logic Control (PLC)…

  10. Experimentation in Institutions: Ethics, Creativity, and Existential Competence

    ERIC Educational Resources Information Center

    O'Donnell, Aislinn

    2018-01-01

    The existential, experiential, ethical, pathic and pre-pathic dimensions of education are essential for the creative composition of subjectivities in institutional spaces, yet educational research and policy tend increasingly to privilege technical discourses and prescriptive approaches both when evaluating "what is effective in…

  11. Education and the Changing Job Market

    ERIC Educational Resources Information Center

    Levy, Frank; Murnane, Richard J.

    2004-01-01

    An education that is centered on complex thinking and communicating helps graduates to gain good jobs in the U.S. Educators will have to focus on raising students' achievement in math, science, and reading because complex, technical skills are essential for the new century's jobs.

  12. Spatial Visualization by Isometric View

    ERIC Educational Resources Information Center

    Yue, Jianping

    2007-01-01

    Spatial visualization is a fundamental skill in technical graphics and engineering designs. From conventional multiview drawing to modern solid modeling using computer-aided design, visualization skills have always been essential for representing three-dimensional objects and assemblies. Researchers have developed various types of tests to measure…

  13. Complete set of essential parameters of an effective theory

    NASA Astrophysics Data System (ADS)

    Ioffe, M. V.; Vereshagin, V. V.

    2018-04-01

    The present paper continues the series [V. V. Vereshagin, True self-energy function and reducibility in effective scalar theories, Phys. Rev. D 89, 125022 (2014); , 10.1103/PhysRevD.89.125022A. Vereshagin and V. Vereshagin, Resultant parameters of effective theory, Phys. Rev. D 69, 025002 (2004); , 10.1103/PhysRevD.69.025002K. Semenov-Tian-Shansky, A. Vereshagin, and V. Vereshagin, S-matrix renormalization in effective theories, Phys. Rev. D 73, 025020 (2006), 10.1103/PhysRevD.73.025020] devoted to the systematic study of effective scattering theories. We consider matrix elements of the effective Lagrangian monomials (in the interaction picture) of arbitrary high dimension D and show that the full set of corresponding coupling constants contains parameters of both kinds: essential and redundant. Since it would be pointless to formulate renormalization prescriptions for redundant parameters, it is necessary to select the full set of the essential ones. This is done in the present paper for the case of the single scalar field.

  14. Technical and physical analysis of the 2014 FIFA World Cup Brazil: winners vs. losers.

    PubMed

    Rumpf, Michael C; Silva, Joao R; Hertzog, Maxime; Farooq, Abdulaziz; Nassis, George

    2017-10-01

    The purpose of the present study was to investigate the technical and physical performance parameters that distinguish between teams winning and losing matches in the 2014 FIFA World Cup Brazil. Data were derived from the FIFA website and from live-statistics provided during each game of the world cup. Twelve physical (such as total distance covered in meters (TD), TD in distinct locomotor categories: low-intensity running (LIR; <11 km/h), moderate-intensity running (MIR; 11 to 14 km/h) and high-intensity-running (HIR; >14 km/h)) and 21 technical parameters (total passes, short-, medium- and long-distance passes, total pass completion rate, dangerous attacks, attacking attempts, delivery in penalty area, ball possession, goals, goals from set-pieces, goals per shot on goal, defending saves, shots, shots on goal, shot accuracy, set-pieces, crosses, corners, clearances, yellow cards) were analyzed. Forty-two games in which a winner and consequently a loser were presented after 90 minutes of game time were investigated with independent t-tests. A binary-logistic regression was utilized to investigate whether the significant variables predicted success of the winning teams. The winning teams scored significantly (P<0.05) greater amount of goals, goals per set-pieces, goals per shots on goals, shots on goal and shot accuracy and received significantly lower yellow cards. The binary-logistic regression utilized showed that shot accuracy was the best predictor for success. The physical parameters did not differ between teams winning and losing a match. Technical performance related to goal scoring parameters play a decisive role in World Cup games. Furthermore, scoring efficacy from open-play as well as from set-pieces are crucial to win matches in a World Cup tournament. At this level, physical performance was not the factor to discriminate between winners and losers.

  15. A national database for essential drugs in South Africa.

    PubMed

    Zweygarth, M; Summers, R S

    2000-06-01

    In the process of drafting standard treatment guidelines for adults and children at hospital level, the Secretariat of the National Essential Drugs List Committee made use of a database designed with technical support from the School of Pharmacy, MEDUNSA. The database links the current 697 drugs on the Essential Drugs List with Standard Treatment Guidelines for over 400 conditions. It served to streamline the inclusion of different drugs and dosage forms in the various guidelines, and provided concise, updated information to other departments involved in drug procurement. From information on drug prices and morbidity, it can also be used to calculate drug consumption and cost estimates and compare them with actual figures.

  16. Study on the removal efficiency of UF membranes using bacteriophages in bench-scale and semi-technical scale.

    PubMed

    Kreissel, K; Bösl, M; Lipp, P; Franzreb, M; Hambsch, B

    2012-01-01

    To determine the removal efficiency of ultrafiltration (UF) membranes for nano-particles in the size range of viruses the state of the art uses challenge tests with virus-spiked water. This work focuses on bench-scale and semi-technical scale experiments. Different experimental parameters influencing the removal efficiency of the tested UF membrane modules were analyzed and evaluated for bench- and semi-technical scale experiments. Organic matter in the water matrix highly influenced the removal of the tested bacteriophages MS2 and phiX174. Less membrane fouling (low ΔTMP) led to a reduced phage reduction. Increased flux positively affected phage removal in natural waters. The tested bacteriophages MS2 and phiX174 revealed different removal properties. MS2, which is widely used as a model organism to determine virus removal efficiencies of membranes, mostly showed a better removal than phiX174 for the natural water qualities tested. It seems that MS2 is possibly a less conservative surrogate for human enteric virus removal than phiX174. In bench-scale experiments log removal values (LRV) for MS2 of 2.5-6.0 and of 2.5-4.5 for phiX174 were obtained for the examined range of parameters. Phage removal obtained with differently fabricated semi-technical modules was quite variable for comparable parameter settings, indicating that module fabrication can lead to differing results. Potting temperature and module size were identified as influencing factors. In conclusion, careful attention has to be paid to the choice of experimental settings and module potting when using bench-scale or semi-technical scale experiments for UF membrane challenge tests.

  17. Effect of Inhalation of Aroma of Geranium Essence on Anxiety and Physiological Parameters during First Stage of Labor in Nulliparous Women: a Randomized Clinical Trial

    PubMed Central

    Rashidi Fakari, Fahimeh; Tabatabaeichehr, Mahbubeh; Kamali, Hossian; Rashidi Fakari, Farzaneh; Naseri, Maryam

    2015-01-01

    Introduction: Anxiety increases significantly during labor, especially among nulliparous women. Such anxiety may affect the progress of labor and physiological parameters. The use of essential oils of aromatic plants, or aromatherapy, is a non-invasive procedure that can decrease childbirth anxiety. This study examined the effect of inhalation of the aroma of geranium essential oil on the level of anxiety and physiological parameters of nulliparous women in the first stage of labor. Methods: In study, was carried out on 100 nulliparous women admitted to Bent al-Hoda Hospital in the city of Bojnord in North Khorasan province of Iran during 2012-2013. The women were randomly assigned to two groups of equal size, one experimental group (geranium essential oil) and one control (placebo) group. Anxiety levels were measured using Spielberger' questionnaire before and after intervention. Physiological parameters (systolic and diastolic blood pressure, respiratory rate, pulse rate) were also measured before and after intervention in both groups. Data analysis was conducted using the x2 test, paired t-test, Mann-Whitney U test, and Wilcox on test on SPSS 11.5. Results: The mean anxiety score decreased significantly after inhalation of the aroma of geranium essential oil. There was also a significant decrease in diastolic blood pressure. Conclusion: Aroma of essential oil of geraniums can effectively reduce anxiety during labor and can be recommended as a non-invasive anti-anxiety aid during childbirth. PMID:26161367

  18. Influence of technical processing units on chemical composition and antimicrobial activity of carrot (Daucus carrot L.) juice essential oil.

    PubMed

    Ma, Tingting; Luo, Jiyang; Tian, Chengrui; Sun, Xiangyu; Quan, Meiping; Zheng, Cuiping; Kang, Lina; Zhan, Jicheng

    2015-03-01

    The effect of three processing units (blanching, enzyme liquefaction, pasteurisation) on chemical composition and antimicrobial activity of carrot juice essential oil was investigated in this paper. A total of 36 compounds were identified by GC-MS from fresh carrot juice essential oil. The main constituents were carotol (20.20%), sabinene (12.80%), β-caryophyllene (8.04%) and α-pinene (6.05%). Compared with the oil of fresh juice, blanching and pasteurisation could significantly decrease the components of the juice essential oil, whereas enzyme liquefaction had no considerable effect on the composition of juice essential oil. With regard to the antimicrobial activity, carrot juice essential oil could cause physical damage and morphological alteration on microorganisms, while the three different processing units showed noticeable differences on the species of microorganisms, the minimum inhibitory concentration and minimum bactericidal concentration. Results revealed that the carrot juice essential oil has great potential for application as a natural antimicrobial applied in pharmaceutical and food industries. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Measuring and Reporting Performance Results for the Pollution Prevention Program Need Improvement Report No. 09-P-0088

    EPA Pesticide Factsheets

    Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This page introduces the concept of P2 measurement.

  20. 48 CFR 16.104 - Factors in selecting contract types.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... provide the bases for negotiating contract pricing arrangements. It is essential that the uncertainties... performance or length of production run. In times of economic uncertainty, contracts extending over a relatively long period may require economic price adjustment terms. (g) Contractor's technical capability and...

  1. Probability and Statistics: A Prelude.

    ERIC Educational Resources Information Center

    Goodman, A. F.; Blischke, W. R.

    Probability and statistics have become indispensable to scientific, technical, and management progress. They serve as essential dialects of mathematics, the classical language of science, and as instruments necessary for intelligent generation and analysis of information. A prelude to probability and statistics is presented by examination of the…

  2. Teaching Professions. FasTrak.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus.

    This document focuses on Ohio's need for a skilled workforce. It begins by introducing the Specialization Ohio Integrated Technical and Academic Competency (ITAC) profiles. Each Specialization ITAC represents a profile of the professional or occupational competencies deemed essential for a person to perform proficiently when graduating from the…

  3. Comprehensive analysis of CLE polypeptide signaling gene expression and overexpression activity in Arabidopsis

    USDA-ARS?s Scientific Manuscript database

    Technical Abstract: Intercellular signaling is essential for the coordination of growth and development in higher plants. Although hundreds of putative receptors have been identified in Arabidopsis (Arabidopsis thaliana), only a few families of extracellular signaling molecules have been discovered...

  4. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

  5. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

  6. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

  7. Connected vehicle impacts on transportation planning technical memorandum #6: skills and expertise required to incorporate connected vehicles into transportation planning.

    DOT National Transportation Integrated Search

    2016-02-08

    Professional development and training are essential to the incorporation of connected/automated vehicles (C/AV) into the transportation planning process. In order to guarantee a successful deployment, transportation planning agencies and their stakeh...

  8. [Personal emergency call system based on human vital and system technical parameters in a Smart Home environment].

    PubMed

    Hampicke, M; Schadow, B; Rossdeutscher, W; Fellbaum, K; Boenick, U

    2002-11-01

    Progress in microtechnology and radio transmission technology has enabled the development of highly reliable emergency-call systems. The present article describes systems that have been specially designed to improve the safety and independence of handicapped and elderly persons living at home. For such persons immediate help in an emergency situation is of crucial importance. The technical state of the art of emergency-call systems specially developed for use by the elderly, is briefly discussed, in particular the well-known radio emergency-call button, with the aid of which an alarm can be activated manually. This system, however, does not offer adequate safety in all emergency situations. Alternative or complementary systems designed to automatically trigger an alarm on the basis of the recording and evaluation of so-called vital parameters, are therefore proposed. In addition, in a smart-home environment with networked devices, further parameters--so-called environment parameters can be used. It is found that the identification of an emergency situation becomes more reliable as the number of parameters employed increases.

  9. Leadership, governance and partnerships are essential One Health competencies.

    PubMed

    Stephen, Craig; Stemshorn, Barry

    2016-12-01

    One Health is held as an approach to solve health problems in this era of complexity and globalization, but inadequate attention has been paid to the competencies required to build successful teams and programs. Most of the discussion on developing One Health teams focuses on creating cross-disciplinary awareness and technical skills. There is, however, evidence that collaborative, multi-disciplinary teams need skills, processes and institutions that enable policy and operations to be co-managed and co-delivered across jurisdictions. We propose that competencies in leadership and human resources; governance and infrastructure; and partnership and stakeholder engagement are essential, but often overlooked One Health attributes. Competencies in these staple attributes of leadership and management need to be more prominent in training and One Health capacity development. Although One Health has been in existence for over a decade, there has been no systematic evaluation of the essential attributes of successful and sustainable One Health programs. As such, much of this paper borrows from experience in other sectors dealing with complex, cross and inter-sectoral problems. Our objective is to advocate for increased investment in One Health leadership, governance and partnership skills to balance the focus on creating cross-disciplinary awareness and technical proficiency in order to maintain One Health as a viable approach to health issues at the human-animal-environment interface.

  10. Characteristics of Four Plant Species Used for Soil Bioengineering Techniques in River Bank Stabilization

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Gao, J. R.; Lou, H. P.; Zhang, J. R.; Rauch, H. P.

    2010-05-01

    Use the potential values of soil bioengineering techniques are important for the wide attention river ecological restoration works in Beijing. At first, demand for basic knowledge of the technical and biological properties of plants is essential for development of such techniques. Species for each chosen plant material type should be selected with an emphasis on the following: suitability for anticipated environment conditions, reasonable availability in desired quantity and probability of successful establishment. Account on these criteria, four species which used as live staking and rooted cutting techniques were selected, namely, Salix X aureo-pendula, Salix cheilophila, Vitex negundo var. heterophylla and Amorpha fruticosa L.. And monitoring work was performed on three construction sites of Beijing. Various survival rates and morphological parameters data were collected. Concerning plants hydraulic and hydrological behavior, bending tests were used to analysis the flexibility of each plant species. The results from rate and morphological parameters monitoring show that: Salix cheilophila performed the best. Other three plants behaved satisfactorily in shoots or roots development respectively. In the bending test mornitoring, Salix cheilophila branch had the least broken number. Then were Salix X aureo-pendula and Amorpha fruticosa L.. Vitex negundo var. branch had the highest broken number, but it tolerated the highest amount of stress. All plant species should be considered in the future scientific research and construction works in Beijing. Keywords: River bank stabilization, live staking, rooted cutting

  11. Estimation of Two-Parameter Logistic Item Response Curves. Research Report 83-1. Mathematical Sciences Technical Report No. 130.

    ERIC Educational Resources Information Center

    Tsutakawa, Robert K.

    This paper presents a method for estimating certain characteristics of test items which are designed to measure ability, or knowledge, in a particular area. Under the assumption that ability parameters are sampled from a normal distribution, the EM algorithm is used to derive maximum likelihood estimates to item parameters of the two-parameter…

  12. The effect of noise-induced variance on parameter recovery from reaction times.

    PubMed

    Vadillo, Miguel A; Garaizar, Pablo

    2016-03-31

    Technical noise can compromise the precision and accuracy of the reaction times collected in psychological experiments, especially in the case of Internet-based studies. Although this noise seems to have only a small impact on traditional statistical analyses, its effects on model fit to reaction-time distributions remains unexplored. Across four simulations we study the impact of technical noise on parameter recovery from data generated from an ex-Gaussian distribution and from a Ratcliff Diffusion Model. Our results suggest that the impact of noise-induced variance tends to be limited to specific parameters and conditions. Although we encourage researchers to adopt all measures to reduce the impact of noise on reaction-time experiments, we conclude that the typical amount of noise-induced variance found in these experiments does not pose substantial problems for statistical analyses based on model fitting.

  13. Patient Protection and Affordable Care Act; HHS notice of benefit and payment parameters for 2016. Final rule.

    PubMed

    2015-02-27

    This final rule sets forth payment parameters and provisions related to the risk adjustment, reinsurance, and risk corridors programs; cost sharing parameters and cost-sharing reductions; and user fees for Federally-facilitated Exchanges. It also finalizes additional standards for the individual market annual open enrollment period for the 2016 benefit year, essential health benefits, qualified health plans, network adequacy, quality improvement strategies, the Small Business Health Options Program, guaranteed availability, guaranteed renewability, minimum essential coverage, the rate review program, the medical loss ratio program, and other related topics.

  14. Technical Parameters Modeling of a Gas Probe Foaming Using an Active Experimental Type Research

    NASA Astrophysics Data System (ADS)

    Tîtu, A. M.; Sandu, A. V.; Pop, A. B.; Ceocea, C.; Tîtu, S.

    2018-06-01

    The present paper deals with a current and complex topic, namely - a technical problem solving regarding the modeling and then optimization of some technical parameters related to the natural gas extraction process. The study subject is to optimize the gas probe sputtering using experimental research methods and data processing by regular probe intervention with different sputtering agents. This procedure makes that the hydrostatic pressure to be reduced by the foam formation from the water deposit and the scrubbing agent which can be removed from the surface by the produced gas flow. The probe production data was analyzed and the so-called candidate for the research itself emerged. This is an extremely complex study and it was carried out on the field works, finding that due to the severe gas field depletion the wells flow decreases and the start of their loading with deposit water, was registered. It was required the regular wells foaming, to optimize the daily production flow and the disposal of the wellbore accumulated water. In order to analyze the process of natural gas production, the factorial experiment and other methods were used. The reason of this choice is that the method can offer very good research results with a small number of experimental data. Finally, through this study the extraction process problems were identified by analyzing and optimizing the technical parameters, which led to a quality improvement of the extraction process.

  15. Technical Note: Estimation of Micro-Watershed Topographic Parameters Using Earth Observatory Tools

    EPA Science Inventory

    The study set out to analyze the feasibility of using Earth observatory tools to derive elevations to characterize topographic parameters of slope gradient and area useful in predicting erosion and for natural resources engineering education and instruction. Earth obseravtory too...

  16. Automobile Engine Control Parameters Study : Volume 1. Summary and Status of Domestic Engine Control Practice

    DOT National Transportation Integrated Search

    1977-02-01

    This report contains the results of a study to evaluate automobile engine control parameters and their effects on vehicle fuel economy and emissions. Volume I presents detailed technical information on the engine control practices used by selected do...

  17. In vivo toxicity and antitumor activity of essential oils extract from agarwood (Aquilaria crassna).

    PubMed

    Dahham, Saad Sabbar; Hassan, Loiy E Ahmed; Ahamed, Mohamed B Khadeer; Majid, Aman Shah Abdul; Majid, Amin Malik Shah Abdul; Zulkepli, Nik Noriman

    2016-07-22

    Aquilaria crassna has been used in traditional Asian medicine to treat vomiting, rheumatism, asthma, and cough. Furthermore, earlier studies from our laboratory have revealed that the essential oil extract from agarwood inhibited colorectal carcinoma cells. Despite of the wide range of ethno-pharmacological uses of agarwood, its toxicity has not been previously evaluated through systematic toxicological studies. Therefore, the potential safety of essential oil extract and its in vivo anti-tumor activity had been investigated. In the acute toxicity study, Swiss female mice were given a single dose of the essential oil extract at 2000 mg/kg/day orally and screened for two weeks after administration. Meanwhile, in the sub-chronic study, two different doses of the extract were administered for 28 days. Mortality, clinical signs, body weight changes, hematological and biochemical parameters, gross findings, organ weights, and histological parameters were monitored during the study. Other than that, in vivo anti-tumor study was assessed by using subcutaneous tumors model established in nude mice. The acute toxicity study showed that the LD50 of the extract was greater than 2000 mg/kg. In the repeated dose for 28-day oral toxicity study, the administration of 100 mg/kg and 500 mg/kg of essential oil per body weight revealed insignificant difference in food and water intakes, bodyweight change, hematological and biochemical parameters, relative organ weights, gross findings or histopathology compared to the control group. Nevertheless, the essential oil extract, when supplemented to nude mice, caused significant growth inhibition of the subcutaneous tumor of HCT 116 colorectal carcinoma cells. Collectively, the data obtained indicated that essential oil extract from agarwood might be a safe material, and this essential oil is suggested as a potential anti-colon cancer candidate.

  18. M-X Environmental Technical Report. Alternative Potential Deployment Areas. Nevada/Utah.

    DTIC Science & Technology

    1980-12-22

    8217M 2 1 ’.. -1’,53 1:93,74 3.t 11701 199.470 I 2.8 Sorce, Bureau of Ecnomic Allysis, 1979. 15 Table 1.1-9. Per capita income and earnings shares by...been separated into Baseline I and Baseline 2. The first set of projections are essentially an extrapolation of 1967-1978 growth trends in the Nevada...migrants in essentially the same manner as the state as a whole although Arizona and Utah cuntribute in excess of 5 percent of the in-migrants

  19. Laboratory simulations of Martian surface parameters and the biological response of terrestrial model organisms to 'extreme' environments

    NASA Astrophysics Data System (ADS)

    Rettberg, P.; Moller, R.; Pogoda de La Vega, U.; Rabbow, E.; Panitz, C.; Mohlmann, D.; Reitz, G.

    For the development of adequate instruments and methods for in situ life detection analysis and for the avoidance of contaminating of Mars by terrestrial life forms introduced to it's surface unintentionally, it is necessary to understand the potential and limits of life on Earth. Whereas it is possible to test most of the environmental parameters of Mars separately in the laboratory, like diurnal and seasonal temperature cyles, pressure, atmospheric composition, and to investigate their biological effects in detail, it is technically more difficult to simulate two or more parameters at the same time. The realistic simulation of a complete Martian surface environment is a considerable technical challenge. It is especially difficult to reproduce the Martian UV climate realistically. Up to now no total Mars simulation was performed in one single experiment which should include diurnal cycles of temperature, UV radiation and humidity in a simulated Martian atmosphere and at Martian pressure, with Martian soil analogues, dust particles, and ionising radiation. However, it is absolutely essential to investigate the biological effects of combined environmental parameters, because it is already known for some cases that biological effects might not necessarily be additive, but can be synergistic or antagonistic. A prominent example is the synergistic effect of vacuum and UV radiation on the survivability of B. subtilis spores. From several investigations in the last decades the Martian UV climate with it's energy-rich short-wavelength radiation down to 200 nm turned out to be the most important deleterious environmental parameter on Mars. Direct UV exposure caused a rapid and nearly complete inactivation of spores. However, thin layers of Martian soil analogue material, like simulated standard Mars JSC-1 or Fe-montmorillonite, are sufficient to shield spores from the deleterious effects of UV radiation. From these results it can be concluded that in spite of the destructive UV climate at least a part of a microbial population might be able to escape the inactiviation by UV radiation, if covered accidentally by Martian dust and soil particles. Up to now the molecular basis of the strong oxidizing properties of Martian soil found 1 by the Viking landers is not completely understood. This chemical reactivity capable of decomposing organic molecules was attributed to the presence of one or more as- yet-unidentified inorganic superoxides or peroxides in the Martian soil. The biological consequences of these photochemical reactions are not yet investigated in detail, although it is known that B. subtilis spores are able to withstand oxidative conditions to a certain degree. The determination of the survival of microorganisms under the physical and chemical `extremes' of Mars will provide detailed insights into the potential for contamination that will allow the development and improvement of planetary protection measures. 2

  20. The Chimera of Validity

    ERIC Educational Resources Information Center

    Baker, Eva L.

    2013-01-01

    Background/Context: Education policy over the past 40 years has focused on the importance of accountability in school improvement. Although much of the scholarly discourse around testing and assessment is technical and statistical, understanding of validity by a non-specialist audience is essential as long as test results drive our educational…

  1. Adaptation of Professional Skills in the Unit Operations Laboratory

    ERIC Educational Resources Information Center

    Rende, Deniz; Rende, Sevinc; Baysal, Nihat

    2012-01-01

    We introduce the design of three consecutive unit operations laboratory (UOL) courses that retain the academic rigor of the course while incorporating skills essential for professional careers, such as ability to propose ideas, develop practical solutions, participate in teamwork, meet deadlines, establish communication between technical support…

  2. Automated Training Evaluation (ATE). Final Report.

    ERIC Educational Resources Information Center

    Charles, John P.; Johnson, Robert M.

    The automation of weapons system training presents the potential for significant savings in training costs in terms of manpower, time, and money. The demonstration of the technical feasibility of automated training through the application of advanced digital computer techniques and advanced training techniques is essential before the application…

  3. Spectrum orbit utilization program technical manual SOUP5 Version 3.8

    NASA Technical Reports Server (NTRS)

    Davidson, J.; Ottey, H. R.; Sawitz, P.; Zusman, F. S.

    1984-01-01

    The underlying engineering and mathematical models as well as the computational methods used by the SOUP5 analysis programs, which are part of the R2BCSAT-83 Broadcast Satellite Computational System, are described. Included are the algorithms used to calculate the technical parameters and references to the relevant technical literature. The system provides the following capabilities: requirements file maintenance, data base maintenance, elliptical satellite beam fitting to service areas, plan synthesis from specified requirements, plan analysis, and report generation/query. Each of these functions are briefly described.

  4. Development of a system for monitoring technical state of the equipment of a cogeneration steam turbine unit

    NASA Astrophysics Data System (ADS)

    Aronson, K. E.; Brodov, Yu. M.; Novoselov, V. B.

    2012-12-01

    Generalized results from the work on developing elements of a comprehensive system for monitoring technical state of the equipment of cogeneration turbines are presented. The parameters of the electrohydraulic turbine control system are considered together with a number of problems concerned with assessing the state of condensers and delivery water heaters.

  5. A Technical Analysis Information Fusion Approach for Stock Price Analysis and Modeling

    NASA Astrophysics Data System (ADS)

    Lahmiri, Salim

    In this paper, we address the problem of technical analysis information fusion in improving stock market index-level prediction. We present an approach for analyzing stock market price behavior based on different categories of technical analysis metrics and a multiple predictive system. Each category of technical analysis measures is used to characterize stock market price movements. The presented predictive system is based on an ensemble of neural networks (NN) coupled with particle swarm intelligence for parameter optimization where each single neural network is trained with a specific category of technical analysis measures. The experimental evaluation on three international stock market indices and three individual stocks show that the presented ensemble-based technical indicators fusion system significantly improves forecasting accuracy in comparison with single NN. Also, it outperforms the classical neural network trained with index-level lagged values and NN trained with stationary wavelet transform details and approximation coefficients. As a result, technical information fusion in NN ensemble architecture helps improving prediction accuracy.

  6. Evaluation of the Hanford 200 West Groundwater Treatment System: Fluidized Bed Bioreactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Looney, Brian B.; Jackson, Dennis G.; Dickson, John O.

    A fluidized bed reactor (FBR) in the 200W water treatment facility at Hanford is removing nitrate from groundwater as part of the overall pump-treat-reinject process. Control of the FBR bed solids has proven challenging, impacting equipment, increasing operations and maintenance (O&M), and limiting the throughput of the facility. In response to the operational challenges, the Department of Energy Richland Office (DOE-RL) commissioned a technical assistance team to facilitate a system engineering evaluation and provide focused support recommendations to the Hanford Team. The DOE Environmental Management (EM) technical assistance process is structured to identify and triage technologies and strategies that addressmore » the target problem(s). The process encourages brainstorming and dialog and allows rapid identification and prioritization of possible options. Recognizing that continuous operation of a large-scale FBR is complex, requiring careful attention to system monitoring data and changing conditions, the technical assistance process focused on explicit identification of the available control parameters (“knobs”), how these parameters interact and impact the FBR system, and how these can be adjusted under different scenarios to achieve operational goals. The technical assistance triage process was performed in collaboration with the Hanford team.« less

  7. Orthogonal Polynomials on the Unit Circle with Fibonacci Verblunsky Coefficients, II. Applications

    NASA Astrophysics Data System (ADS)

    Damanik, David; Munger, Paul; Yessen, William N.

    2013-10-01

    We consider CMV matrices with Verblunsky coefficients determined in an appropriate way by the Fibonacci sequence and present two applications of the spectral theory of such matrices to problems in mathematical physics. In our first application we estimate the spreading rates of quantum walks on the line with time-independent coins following the Fibonacci sequence. The estimates we obtain are explicit in terms of the parameters of the system. In our second application, we establish a connection between the classical nearest neighbor Ising model on the one-dimensional lattice in the complex magnetic field regime, and CMV operators. In particular, given a sequence of nearest-neighbor interaction couplings, we construct a sequence of Verblunsky coefficients, such that the support of the Lee-Yang zeros of the partition function for the Ising model in the thermodynamic limit coincides with the essential spectrum of the CMV matrix with the constructed Verblunsky coefficients. Under certain technical conditions, we also show that the zeros distribution measure coincides with the density of states measure for the CMV matrix.

  8. Study of lobster eye optics with iridium coated x-ray mirrors for a rocket experiment

    NASA Astrophysics Data System (ADS)

    Stehlikova, Veronika; Urban, Martin; Nentvich, Ondrej; Inneman, Adolf; Döhring, Thorsten; Probst, Anne-Catherine

    2017-05-01

    In the field of astronomical X-ray telescopes, different types of optics based on grazing incidence mirrors can be used. This contribution describes the special design of a lobster-eye optics in Schmidt's arrangement, which uses dual reflection to increase the collecting area. The individual mirrors of this wide-field telescope are made of at silicon wafers coated with reflecting iridium layers. This iridium coatings have some advantages compared to more common gold layers as is shown in corresponding simulations. The iridium coating process for the X-ray mirrors was developed within a cooperation of the Aschaffenburg University of Applied Sciences and the Czech Technical University in Prague. Different mirror parameters essential for a proper function of the X-ray optics, like the surface microroughness and the problematic of a good adhesion quality of the coatings were studied. After integration of the individual mirrors into the final lobster-eye optics and the corresponding space qualification testing it is planned to fly the telescope in a recently proposed NASA rocket experiment.

  9. A Simple and Low-Cost Monitoring System to Investigate Environmental Conditions in a Biological Research Laboratory

    PubMed Central

    Gurdita, Akshay; Vovko, Heather; Ungrin, Mark

    2016-01-01

    Basic equipment such as incubation and refrigeration systems plays a critical role in nearly all aspects of the traditional biological research laboratory. Their proper functioning is therefore essential to ensure reliable and repeatable experimental results. Despite this fact, in many academic laboratories little attention is paid to validating and monitoring their function, primarily due to the cost and/or technical complexity of available commercial solutions. We have therefore developed a simple and low-cost monitoring system that combines a “Raspberry Pi” single-board computer with USB-connected sensor interfaces to track and log parameters such as temperature and pressure, and send email alert messages as appropriate. The system is controlled by open-source software, and we have also generated scripts to automate software setup so that no background in programming is required to install and use it. We have applied it to investigate the behaviour of our own equipment, and present here the results along with the details of the monitoring system used to obtain them. PMID:26771659

  10. Non-Functional Property Driven Service Governance: Performance Implications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Yan; Zhu, Liming; Bass, Len

    2007-09-17

    Service governance is a set of businesses processes, policies and technical solutions that support enterprises in their implementation and management of their SOA. The decisions of service governance, especially concerning service boundaries at the enterprise level, influence the deployment topology of business services across or within business organizations. Deployment topologies are realized by integration technologies such as Enterprise Service Bus (ESB). Service governance and technical solutions interact in a subtle way including through communication patterns and protocols between services and ESBs, as well as the deployment and configuration of ESB. These factors have a strong influence on the Non- Functionalmore » Properties (NFP) of a SOA solution. A systematic approach is essential to understand alternative technical solutions for a specific service governance decision. This paper proposes a modeling approach to evaluate the performance-related NFP impacts when mapping service governance to technical solutions using an ESB. This approach is illustrated by the quantitative performance analysis of a real« less

  11. The Relationship Between Technical And Nontechnical Skills Within A Simulation-Based Ureteroscopy Training Environment.

    PubMed

    Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; Khan, Shahid; McIlhenny, Craig; Brewin, James; Sahai, Arun; Bello, Fernando; Kneebone, Roger; Shamim Khan, Muhammad; Dasgupta, Prokar; Ahmed, Kamran

    2015-01-01

    Little integration of technical and nontechnical skills (e.g., situational awareness, communication, decision making, teamwork, and leadership) teaching exists within surgery. We therefore aimed to (1) evaluate the relationship between these 2 skill sets within a simulation-based environment and (2) assess if certain nontechnical skill components are of particular relevance to technical performance. A prospective analysis of data acquired from a comparative study of simulation vs nonsimulation training was conducted. Half of the participants underwent training of technical and nontechnical skills within ureteroscopy, with the remaining half undergoing no training. All were assessed within a full immersion environment against both technical (time to completion, Objective Structured Assessment of Technical Skills, and task-specific checklist scores) and nontechnical parameters (Nontechnical Skills for Surgeons [NOTSS] rating scale). The data of whole and individual cohorts were analyzed using Pearson correlation coefficient. The trial took place within the Simulation and Interactive Learning Centre at Guy's Hospital, London, UK. In total, 32 novice participants with no prior practical ureteroscopy experience were included within the data analysis. A correlation was found within all outcome measures analyzed. For the whole cohort, a strong negative correlation was found between time to completion and NOTSS scores (r = -0.75, p < 0.001), with strong positive correlations identified when NOTSS scores were compared with Objective Structured Assessment of Technical Skills (r = 0.89, p < 0.001) and task-specific checklist scores (r = 0.91, p < 0.001). Similar results were observed when each cohort was analyzed separately. Finally, all individual nontechnical skill components demonstrated a strong correlation with all technical skill parameters, regardless of training. A strong correlation between technical and nontechnical performance exists, which was demonstrated to be irrespective of training received. This may suggest an inherent link between skill sets. Furthermore, all nontechnical skill sets are important in technical performance. This supports the notion that both of these skills should be trained and assessed together within 1 curriculum. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  12. Relative importance of physical and economic factors in Appalachian coalbed gas assessment

    USGS Publications Warehouse

    Attanasi, E.D.

    1998-01-01

    In the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey, only 20% of the assessed technically recoverable Appalachian Province coalbed gas resources were economic. Physical and economic variables are examined to explain the disparity between economic and technically recoverable coalbed gas. The Anticline and Syncline plays of the Northern Appalachian Basin, which account for 77% of the assessed technically recoverable coalbed gas, are not economic. Analysis shows marginal reductions in costs or rate of return will not turn these plays into commercial successes. Physical parameters that determine ultimate well recoverability and the rate of gas recovery are primary reasons the Northern Appalachian Basin plays are non-commercial. If the application of new well stimulation technology could offset slow gas desorption rates, Appalachian Province economic gas could increase to more then 70% of the technically recoverable gas. Similarly, if operators are able to develop strategies to selectively drill plays by avoiding dry holes and non-commercial occurrences, the economic fraction of technically recoverable gas could increase to over half.In the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey, only 20% of the assessed technically recoverable Appalachian Province coalbed gas resources were economic. Physical and economic variables are examined to explain the disparity between economic and technically recoverable coalbed gas. The Anticline and Syncline plays of the Northern Appalachian Basin, which account for 77% of the assessed technically recoverable coalbed gas, are not economic. Analysis shows marginal reductions in costs or rate of return will not turn these plays into commercial successes. Physical parameters that determine ultimate well recoverability and the rate of gas recovery are primary reasons the Northern Appalachian Basin plays are non-commercial. If the application of new well stimulation technology could offset slow gas desorption rates, Appalachian Province economic gas could increase to more then 70% of the technically recoverable gas. Similarly, if operators are able to develop strategies to selectively drill plays by avoiding dry holes and non-commercial occurrences, the economic fraction of technically recoverable gas could increase to over half.

  13. 75 FR 25270 - Administration for Children and Families; Single-Source Program Expansion Supplement Grant

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-07

    ...--(i) To assist refugees in obtaining the skills which are necessary for economic self-sufficiency... the Ethiopian Community Development Council, Inc. (ECDC), located in Arlington, VA. Current economic... collaboration to meet these challenges. Provision of technical assistance is essential to support the long- term...

  14. Problem Solving. Research Brief

    ERIC Educational Resources Information Center

    Muir, Mike

    2004-01-01

    No longer solely the domain of Mathematics, problem solving permeates every area of today's curricula. Ideally students are applying heuristics strategies in varied contexts and novel situations in every subject taught. The ability to solve problems is a basic life skill and is essential to understanding technical subjects. Problem-solving is a…

  15. Comprehending the Critical Importance of Vocational Technical Education in a Global Economy Era.

    ERIC Educational Resources Information Center

    Wolansky, William D.

    1990-01-01

    Industrialized nations have learned that vocational education is essential to developing a skilled work force. Newly industrialized countries competing in the global economy are finding that automation, multinational companies, and rapid growth are making investment in human resources through training a critical strategy. (SK)

  16. Essential Foundations for Establishing Equivalence in Cross-National Higher Education Assessment

    ERIC Educational Resources Information Center

    Richardson, Sarah; Coates, Hamish

    2014-01-01

    The global context of contemporary higher education demands international benchmarks. Quality assurance of teaching and learning would benefit from the insights gained from cross-cultural assessments. If cross-cultural assessments are used it is imperative that equivalence is assured, requiring attention to the technical standards used. In this…

  17. Capacity Building for Rural Development in the United States.

    ERIC Educational Resources Information Center

    Murray, Michael; Dunn, Larry

    1995-01-01

    An essential component of community-based rural development is the leadership and problem-solving abilities of local people. The Colorado Rural Revitalization Project--a joint venture of two universities and a state agency--provided educational, consultative, and technical assistance services for a 1-year capacity-building program in 47…

  18. Highest integration in microelectronics: Development of digital ASICs for PARS3-LR

    NASA Astrophysics Data System (ADS)

    Scholler, Peter; Vonlutz, Rainer

    Essential electronic system components by PARS3-LR, show high requirements in calculation power, power consumption and reliability, by immediately increasing integration thicknesses. These problems are solved by using integrated circuits, developed by LSI LOGIC, that uses the technical and economic advantages of this leading edge technology.

  19. Hotel & Food Service Industries. Workforce & Workplace Literacy Series.

    ERIC Educational Resources Information Center

    BCL Brief, 1992

    1992-01-01

    This brief gives an overview of the topic of workplace literacy for the hotel and food service industries and lists program contacts. The following organizations operate employee basic skills programs for hotel and food service employees, provide technical assistance, or operate grant programs: Essential Skills Resource Center; Language Training…

  20. Special Report on Ingested Inorganic Arsenic: Skin Cancer; Nutritional Essentiality (Sab Review Draft)

    EPA Science Inventory

    A technical panel of EPA's Risk Assessment Forum has studied three special issues regarding certain health effects, particularly skin cancer, associated with arsenic ingestion: (1) the validity of the Taiwan study and its use for dose-response assessment in the U.S. population, (...

  1. The Need for More Culturally Diverse Leaders in Postsecondary Technical Education: A Challenge for Community Colleges.

    ERIC Educational Resources Information Center

    Farmer, Edgar I.

    1997-01-01

    Minorities and women are underrepresented in community college leadership as well as executive and administrative positions in corporations. Because these groups comprise 50% of the work force, it is essential that diversity in education and business leadership be cultivated. (SK)

  2. Are Agricultural Graduates Meeting Employers' Expectations? A Perspective from Iran

    ERIC Educational Resources Information Center

    Alibeigi, Amir Hossein; Zarafshani, Kiumars

    2006-01-01

    A high level of personal capacity, the relevant professional competence and technical skills are essential for a graduate's successful transition to the workplace. The purpose of this survey was to identify the main competencies that higher agricultural education graduates should possess, based on the perceptions of potential agricultural…

  3. Bringing Knowledge Management into an Engineering Curriculum

    ERIC Educational Resources Information Center

    Winberg, S. L.; Schach, S. R.; Inggs, M. R.

    2007-01-01

    The use of effective knowledge management is becoming an essential part of technical development projects in order to enable developers to handle the growing complexity of these projects. In this article we discuss an innovative approach to address this concern from the perspective of an undergraduate engineering curriculum. Instead of adding…

  4. Ohio Business Management. Technical Competency Profile (TCP).

    ERIC Educational Resources Information Center

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in business management. Ohio College Tech Prep Program standards are described, and a key to profile codes is provided. Sample occupations in this career area, such as management trainee, product manager, and advertising…

  5. "They Start to Get "Malicia"": Teaching Tacit and Technical Knowledge

    ERIC Educational Resources Information Center

    Stephens, Neil; Delamont, Sara

    2009-01-01

    The sociological study of education involves focusing upon teaching and learning, upon explicit instruction and the acquisition of the tacit knowledge and skills that are essential if learners are to become enculturated into a new "habitus". Sociological insight into these processes can come from research on conventional educational…

  6. KABAM Version 1.0 User's Guide and Technical Documentation - Appendix E - Selection of Bird Species of Concern and Corresponding Biological Parameters

    EPA Pesticide Factsheets

    Bird species of concern were identified to define default parameters (body weight and diet composition) to represent birds in KABAM. KABAM is a simulation model used to predict pesticide concentrations in aquatic regions for use in exposure assessments.

  7. On the Singularity Structure of WKB Solution of the Boosted Whittaker Equation: its Relevance to Resurgent Functions with Essential Singularities

    NASA Astrophysics Data System (ADS)

    Kamimoto, Shingo; Kawai, Takahiro; Koike, Tatsuya

    2016-12-01

    Inspired by the symbol calculus of linear differential operators of infinite order applied to the Borel transformed WKB solutions of simple-pole type equation [Kamimoto et al. (RIMS Kôkyûroku Bessatsu B 52:127-146, 2014)], which is summarized in Section 1, we introduce in Section 2 the space of simple resurgent functions depending on a parameter with an infra-exponential type growth order, and then we define the assigning operator A which acts on the space and produces resurgent functions with essential singularities. In Section 3, we apply the operator A to the Borel transforms of the Voros coefficient and its exponentiation for the Whittaker equation with a large parameter so that we may find the Borel transforms of the Voros coefficient and its exponentiation for the boosted Whittaker equation with a large parameter. In Section 4, we use these results to find the explicit form of the alien derivatives of the Borel transformed WKB solutions of the boosted Whittaker equation with a large parameter. The results in this paper manifest the importance of resurgent functions with essential singularities in developing the exact WKB analysis, the WKB analysis based on the resurgent function theory. It is also worth emphasizing that the concrete form of essential singularities we encounter is expressed by the linear differential operators of infinite order.

  8. Prospects for using the technology of circulating fluidized bed for technically refitting Russian thermal power stations

    NASA Astrophysics Data System (ADS)

    Ryabov, G. A.; Folomeev, O. M.; Litun, D. S.; Sankin, D. A.; Dmitryukova, I. G.

    2009-01-01

    The present state and development of circulating fluidized bed (CFB) technology around the world are briefly reviewed. Questions of increasing the capacity of single boiler units and raising the parameters of steam are discussed. CFB boilers for 225- and 330-MW power units are described and their parameters are estimated as applied to the conditions of firing different Russian fuels. Indicators characterizing CFB boilers and pulverized-coal boilers are given. Capital outlays and operational costs for new coal-fired units are compared, and the results from this comparison are used to show the field of the most promising use of the CFB technology during technical refitting of Russian thermal power stations.

  9. Software and Hardware System for Fast Processes Study When Preparing Foundation Beds of Oil and Gas Facilities

    NASA Astrophysics Data System (ADS)

    Gruzin, A. V.; Gruzin, V. V.; Shalay, V. V.

    2018-04-01

    Analysis of existing technologies for preparing foundation beds of oil and gas buildings and structures has revealed the lack of reasoned recommendations on the selection of rational technical and technological parameters of compaction. To study the nature of the dynamics of fast processes during compaction of foundation beds of oil and gas facilities, a specialized software and hardware system was developed. The method of calculating the basic technical parameters of the equipment for recording fast processes is presented, as well as the algorithm for processing the experimental data. The performed preliminary studies confirmed the accuracy of the decisions made and the calculations performed.

  10. Novel noninvasive point-of-care device for real time hemoglobin monitoring

    NASA Astrophysics Data System (ADS)

    Timm, Ulrich; Gewiss, Helge; Kraitl, Jens; Stuepmann, Kirstin; Hinz, Michael; Koball, Sebastian; Ewald, Hartmut

    2014-02-01

    During the perioperative period, which includes the period before surgery and after surgery (postoperative), it is essential to measure diagnostic parameters such as: blood oxygen saturation; hemoglobin (Hb) concentration; and pulse rate. The Hb concentration in human blood is an important parameter to evaluate the physiological condition of an individual, as Hb is the oxygen carrying component of red blood cells. By determining the Hb concentration, it is possible, for example, to observe intraoperative or postoperative bleeding, and use this information as a trigger for autologous/ allogenic blood transfusions. In blood donation center it is also an essential parameter for the decision regarding the acceptance of the donor.

  11. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 16: Aerospace knowledge diffusion research

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Kennedy, John M.; Barclay, Rebecca O.; White, Terry F.; Jones, Ray (Editor)

    1991-01-01

    The project is a cooperative US effort between NASA, DoD, and Indiana University. This research was endorsed by the AGARD Technical Information Panel and the American Institute of Aeronautics and Astronautics (AIAA) Technical Information Committee. The four-phase inquiry focuses on scientific and technical information (STI) as knowledge, the channels through which this knowledge is communicated, and the members of the social system associated with and involved in diffusing this knowledge throughout the aerospace community. The project is based on two premises: (1) although STI is essential to innovation, STI by itself does not ensure innovation; and (2) utilizing existing STI or creating new STI, does often facilitate technological innovation. The topics covered include the following: information-seeking habits, knowledge transfer, academic sector, non-US organizations, present status, comparative study, and timetable.

  12. Relationship between the erosion properties of soils and other parameters

    USDA-ARS?s Scientific Manuscript database

    Soil parameters are essential for erosion process prediction and ultimately improved model development, especially as they relate to dam and levee failure. Soil parameters including soil texture and structure, soil classification, soil compaction, moisture content, and degree of saturation can play...

  13. Improving automation standards via semantic modelling: Application to ISA88.

    PubMed

    Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

    2017-03-01

    Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  14. An Integrated Economics Model for ISRU in Support of a Mars Colony - Initial Status Report

    NASA Technical Reports Server (NTRS)

    Shishko, Robert; Fradet, Rene; Saydam, Serkan; Tapia-Cortez, Carlos; Dempster, Andrew G.; Coulton, Jeff

    2015-01-01

    The aim of this effort is to develop an integrated set of risk-based financial and technical models to evaluate multiple Off-Earth Mining (OEM) scenarios. This quantitative, scenario- and simulation-based tool will help identify combinations of market variables, technical parameters, and policy levers that will enable the expansion of the global economy into the solar system and return economic benefits. Human ventures in space are entering a new phase in which missions formerly driven by government agencies are now being replaced by those led by commercial enterprises - in launch, satellite deployment, resupply of the International Space Station, and space tourism. In the not-too-distant future, commercial opportunities will also include the mining of asteroids, the Moon, and Mars. This investigation will examine the role of OEM in a growing space economy. (In this investigation, the term 'mining' is taken to embrace minerals, ice/water, and other in situ resources.) OEM can be the engine that drives the space economy, so it would be useful to understand what OEM market conditions and technology requirements are needed for that economy to prosper. These specific elements will be studied in the wider context of creating an economy that could ultimately support a sustainable Mars Colony. Such a colony will need in situ resources not only for its own survival, but to prosper and grow, it must create viable business ventures, essentially by fulfilling the demand for in situ resources from and on Mars. This investigation will focus on understanding the role and economic prospect for OEM associated with the Human Colonization of Mars (HCM).

  15. Investigating bacterial populations in styrene-degrading biofilters by 16S rDNA tag pyrosequencing.

    PubMed

    Portune, Kevin J; Pérez, M Carmen; Álvarez-Hornos, F Javier; Gabaldón, Carmen

    2015-01-01

    Microbial biofilms are essential components in the elimination of pollutants within biofilters, yet still little is known regarding the complex relationships between microbial community structure and biodegradation function within these engineered ecosystems. To further explore this relationship, 16S rDNA tag pyrosequencing was applied to samples taken at four time points from a styrene-degrading biofilter undergoing variable operating conditions. Changes in microbial structure were observed between different stages of biofilter operation, and the level of styrene concentration was revealed to be a critical factor affecting these changes. Bacterial genera Azoarcus and Pseudomonas were among the dominant classified genera in the biofilter. Canonical correspondence analysis (CCA) and correlation analysis revealed that the genera Brevundimonas, Hydrogenophaga, and Achromobacter may play important roles in styrene degradation under increasing styrene concentrations. No significant correlations (P > 0.05) could be detected between biofilter operational/functional parameters and biodiversity measurements, although biological heterogeneity within biofilms and/or technical variability within pyrosequencing may have considerably affected these results. Percentages of selected bacterial taxonomic groups detected by fluorescence in situ hybridization (FISH) were compared to results from pyrosequencing in order to assess the effectiveness and limitations of each method for identifying each microbial taxon. Comparison of results revealed discrepancies between the two methods in the detected percentages of numerous taxonomic groups. Biases and technical limitations of both FISH and pyrosequencing, such as the binding of FISH probes to non-target microbial groups and lack of classification of sequences for defined taxonomic groups from pyrosequencing, may partially explain some differences between the two methods.

  16. Effects of Short-Interval and Long-Interval Swimming Protocols on Performance, Aerobic Adaptations, and Technical Parameters: A Training Study.

    PubMed

    Dalamitros, Athanasios A; Zafeiridis, Andreas S; Toubekis, Argyris G; Tsalis, George A; Pelarigo, Jailton G; Manou, Vasiliki; Kellis, Spiridon

    2016-10-01

    Dalamitros, AA, Zafeiridis, AS, Toubekis, AG, Tsalis, GA, Pelarigo, JG, Manou, V, and Kellis, S. Effects of short-interval and long-interval swimming protocols on performance, aerobic adaptations, and technical parameters: A training study. J Strength Cond Res 30(10): 2871-2879, 2016-This study compared 2-interval swimming training programs of different work interval durations, matched for total distance and exercise intensity, on swimming performance, aerobic adaptations, and technical parameters. Twenty-four former swimmers were equally divided to short-interval training group (INT50, 12-16 × 50 m with 15 seconds rest), long-interval training group (INT100, 6-8 × 100 m with 30 seconds rest), and a control group (CON). The 2 experimental groups followed the specified swimming training program for 8 weeks. Before and after training, swimming performance, technical parameters, and indices of aerobic adaptations were assessed. ΙΝΤ50 and ΙΝΤ100 improved swimming performance in 100 and 400-m tests and the maximal aerobic speed (p ≤ 0.05); the performance in the 50-m swim did not change. Posttraining V[Combining Dot Above]O2max values were higher compared with pretraining values in both training groups (p ≤ 0.05), whereas peak aerobic power output increased only in INT100 (p ≤ 0.05). The 1-minute heart rate and blood lactate recovery values decreased after training in both groups (p < 0.01). Stroke length increased in 100 and 400-m swimming tests after training in both groups (p ≤ 0.05); no changes were observed in stroke rate after training. Comparisons between groups on posttraining mean values, after adjusting for pretraining values, revealed no significant differences between ΙΝΤ50 and ΙΝΤ100 for all variables; however, all measures were improved vs. the respective values in the CON (p < 0.001-0.05). In conclusion, when matched for distance and exercise intensity, the short-interval (50 m) and long-interval (100 m) protocols confer analogous improvements in swimming performance, in stroke cycle parameters, and in indices of aerobic adaptations after 8 weeks of training.

  17. A Fast Solution of the Lindley Equations for the M-Group Regression Problem. Technical Report 78-3, October 1977 through May 1978.

    ERIC Educational Resources Information Center

    Molenaar, Ivo W.

    The technical problems involved in obtaining Bayesian model estimates for the regression parameters in m similar groups are studied. The available computer programs, BPREP (BASIC), and BAYREG, both written in FORTRAN, require an amount of computer processing that does not encourage regular use. These programs are analyzed so that the performance…

  18. Effective DQE (eDQE) and dose to optimize radiographic technical parameters: a survey of pediatric chest X-ray examinations in Korea.

    PubMed

    Park, Hye-Suk; Kim, Ye-Seul; Park, Ok-Seob; Kim, Sang-Tae; Jeon, Chang-Woo; Kim, Hee-Joung

    2014-04-01

    The purpose of this study was to investigate the effect of various technical parameters for dose optimization in pediatric chest radiological examinations by evaluating effective dose and effective detective quantum efficiency (eDQE). For tube voltages ranging from 40 to 90 kV in 10 kV increments at the focus-to-detector distance (FDD) of 100, 110, 120, 150, 180 cm, the eDQE was evaluated at same effective dose. The eDQE was considerably higher without the use of the grid on equivalent effective dose. This indicates that the reduction of scatter radiation did not compensate for the loss of absorbed effective photons in the grid. The eDQE increased with increasing FDD because of the greater effective modulation transfer function (eMTF) with lower focal spot blurring. However, most of the major hospitals in Korea employed a short FDD of 100 cm with the grid. The entrance surface air kerma values for the hospitals of this survey exceeded the Korean reference level of 100 μGy. The different reference levels might be appropriate for the same examination conducted on children of different ages. Also, it is necessary to refine the technical parameters to perform pediatric chest examinations.

  19. Mars Colony in situ resource utilization: An integrated architecture and economics model

    NASA Astrophysics Data System (ADS)

    Shishko, Robert; Fradet, René; Do, Sydney; Saydam, Serkan; Tapia-Cortez, Carlos; Dempster, Andrew G.; Coulton, Jeff

    2017-09-01

    This paper reports on our effort to develop an ensemble of specialized models to explore the commercial potential of mining water/ice on Mars in support of a Mars Colony. This ensemble starts with a formal systems architecting framework to describe a Mars Colony and capture its artifacts' parameters and technical attributes. The resulting database is then linked to a variety of ;downstream; analytic models. In particular, we integrated an extraction process (i.e., ;mining;) model, a simulation of the colony's environmental control and life support infrastructure known as HabNet, and a risk-based economics model. The mining model focuses on the technologies associated with in situ resource extraction, processing, storage and handling, and delivery. This model computes the production rate as a function of the systems' technical parameters and the local Mars environment. HabNet simulates the fundamental sustainability relationships associated with establishing and maintaining the colony's population. The economics model brings together market information, investment and operating costs, along with measures of market uncertainty and Monte Carlo techniques, with the objective of determining the profitability of commercial water/ice in situ mining operations. All told, over 50 market and technical parameters can be varied in order to address ;what-if; questions, including colony location.

  20. Changes in growth, hormones levels and essential oil content of Ammi visnaga L. plants treated with some bioregulators

    PubMed Central

    Talaat, Iman M.; Khattab, Hemmat I.; Ahmed, Aisha M.

    2013-01-01

    The effects of foliar application of different concentrations of amino acids (tyrosine and phenylalanine) and phenolic acids (trans-cinnamic acid, benzoic acid and salicylic acid) on growth, pigment content, hormones levels and essential oil content of Ammi visnaga L were carried out during two successive seasons. It is clear that foliar application of either amino acids or phenolics significantly promoted the growth parameters in terms of shoot height, fresh and dry biomass, number of branches and number of umbels per plant. The increment of growth parameter was associated with elevated levels of growth promoters (IAA, GA3, total cytokinins) and low level of ABA. The greatest increase in the previously mentioned parameters was measured in plants exposed to different concentrations of phenols particularly in benzoic acid-treated plants. Such effect was concentration dependent. All treatments led to significant increments in yield seeds and oil content. Moreover, gas liquid chromatographic analysis revealed that the main identified components of essential oil were 2,2-dimethyl butanoic acid, isobutyl isobutyrate, α-isophorone, thymol, fenchyl acetate and linalool. Phenolics and amino acid treatments resulted in qualitative differences in these components of essential oil. PMID:25183946

  1. Non-technical skills of surgical trainees and experienced surgeons.

    PubMed

    Gostlow, H; Marlow, N; Thomas, M J W; Hewett, P J; Kiermeier, A; Babidge, W; Altree, M; Pena, G; Maddern, G

    2017-05-01

    In addition to technical expertise, surgical competence requires effective non-technical skills to ensure patient safety and maintenance of standards. Recently the Royal Australasian College of Surgeons implemented a new Surgical Education and Training (SET) curriculum that incorporated non-technical skills considered essential for a competent surgeon. This study sought to compare the non-technical skills of experienced surgeons who completed their training before the introduction of SET with the non-technical skills of more recent trainees. Surgical trainees and experienced surgeons undertook a simulated scenario designed to challenge their non-technical skills. Scenarios were video recorded and participants were assessed using the Non-Technical Skills for Surgeons (NOTSS) scoring system. Participants were divided into subgroups according to years of experience and their NOTSS scores were compared. For most NOTSS elements, mean scores increased initially, peaking around the time of Fellowship, before decreasing roughly linearly over time. There was a significant downward trend in score with increasing years since being awarded Fellowship for six of the 12 NOTSS elements: considering options (score -0·015 units per year), implementing and reviewing decisions (-0·020 per year), establishing a shared understanding (-0·014 per year), setting and maintaining standards (-0·024 per year), supporting others (-0·031 per year) and coping with pressure (-0·015 per year). The drop in NOTSS score was unexpected and highlights that even experienced surgeons are not immune to deficiencies in non-technical skills. Consideration should be given to continuing professional development programmes focusing on non-technical skills, regardless of the level of professional experience. © 2017 BJS Society Ltd Published by John Wiley & Sons Ltd.

  2. A new multi-angle remote sensing framework for scaling vegetation properties from tower-based spectro-radiometers to next generation "CubeSat"-satellites.

    NASA Astrophysics Data System (ADS)

    Hilker, T.; Hall, F. G.; Dyrud, L. P.; Slagowski, S.

    2014-12-01

    Frequent earth observations are essential for assessing the risks involved with global climate change, its feedbacks on carbon, energy and water cycling and consequences for live on earth. Often, satellite-remote sensing is the only practical way to provide such observations at comprehensive spatial scales, but relationships between land surface parameters and remotely sensed observations are mostly empirical and cannot easily be scaled across larger areas or over longer time intervals. For instance, optically based methods frequently depend on extraneous effects that are unrelated to the surface property of interest, including the sun-server geometry or background reflectance. As an alternative to traditional, mono-angle techniques, multi-angle remote sensing can help overcome some of these limitations by allowing vegetation properties to be derived from comprehensive reflectance models that describe changes in surface parameters based on physical principles and radiative transfer theory. Recent results have shown in theoretical and experimental research that multi-angle techniques can be used to infer and scale the photosynthetic rate of vegetation, its biochemical and structural composition robustly from remote sensing. Multi-angle remote sensing could therefore revolutionize estimates of the terrestrial carbon uptake as scaling of primary productivity may provide a quantum leap in understanding the spatial and temporal complexity of terrestrial earth science. Here, we introduce a framework of next generation tower-based instruments to a novel and unique constellation of nano-satellites (Figure 1) that will allow us to systematically scale vegetation parameters from stand to global levels. We provide technical insights, scientific rationale and present results. We conclude that future earth observation from multi-angle satellite constellations, supported by tower based remote sensing will open new opportunities for earth system science and earth system modeling.

  3. [Code of civil procedure for medical workers -the essential principles of proceedings and expediting of trials-].

    PubMed

    Kageyama, Kyoko; Jimba, Koichi; Hashimoto, Satoru

    2013-04-01

    Code of civil procedure is started when a plaintiff appeals to the law. Conversely, if a suit is not appealed, it is not started. We explain the essential principles of the code of civil procedure, and present systems associated with expediting trials (a brief, preliminary oral arguments, preparatory proceedings, inquiry to opponent, organized proceedings, technical adviser system, etc.). Amendment of law is repeated for the purpose of aiming suitably expediting trials. We should utilize the present code of civil procedure suitably, and expect the quick conclusion of trials.

  4. NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

    NASA Technical Reports Server (NTRS)

    ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

    2005-01-01

    The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

  5. Dimensioning appropriate technical and economic parameters of elements in urban distribution power nets based on discrete fast marching method

    NASA Astrophysics Data System (ADS)

    Afanasyev, A. P.; Bazhenov, R. I.; Luchaninov, D. V.

    2018-05-01

    The main purpose of the research is to develop techniques for defining the best technical and economic trajectories of cables in urban power systems. The proposed algorithms of calculation of the routes for laying cables take into consideration topological, technical and economic features of the cabling. The discrete option of an algorithm Fast marching method is applied as a calculating tool. It has certain advantages compared to other approaches. In particular, this algorithm is cost-effective to compute, therefore, it is not iterative. Trajectories of received laying cables are considered as optimal ones from the point of view of technical and economic criteria. They correspond to the present rules of modern urban development.

  6. Framework conditions and requirements to ensure the technical functional safety of reprocessed medical devices.

    PubMed

    Kraft, Marc

    2008-09-03

    Testing and restoring technical-functional safety is an essential part of medical device reprocessing. Technical functional tests have to be carried out on the medical device in the course of the validation of reprocessing procedures. These ensure (in addition to the hygiene tests) that the reprocessing procedure is suitable for the medical device. Functional tests are, however, also a part of reprocessing procedures. As a stage in the reprocessing, they ensure for the individual medical device that no damage or other changes limit the performance. When determining which technical-functional tests are to be carried out, the current technological standard has to be taken into account in the form of product-specific and process-oriented norms. Product-specific norms primarily define safety-relevant requirements. The risk management method described in DIN EN ISO 14971 is the basis for recognising hazards; the likelihood of such hazards arising can be minimised through additional technical-functional tests, which may not yet have been standardised. Risk management is part of a quality management system, which must be bindingly certified for manufacturers and processors of critical medical devices with particularly high processing demands by a body accredited by the competent authority.

  7. Framework conditions and requirements to ensure the technical functional safety of reprocessed medical devices

    PubMed Central

    Kraft, Marc

    2008-01-01

    Testing and restoring technical-functional safety is an essential part of medical device reprocessing. Technical functional tests have to be carried out on the medical device in the course of the validation of reprocessing procedures. These ensure (in addition to the hygiene tests) that the reprocessing procedure is suitable for the medical device. Functional tests are, however, also a part of reprocessing procedures. As a stage in the reprocessing, they ensure for the individual medical device that no damage or other changes limit the performance. When determining which technical-functional tests are to be carried out, the current technological standard has to be taken into account in the form of product-specific and process-oriented norms. Product-specific norms primarily define safety-relevant requirements. The risk management method described in DIN EN ISO 14971 is the basis for recognising hazards; the likelihood of such hazards arising can be minimised through additional technical-functional tests, which may not yet have been standardised. Risk management is part of a quality management system, which must be bindingly certified for manufacturers and processors of critical medical devices with particularly high processing demands by a body accredited by the competent authority. PMID:20204095

  8. Item Vector Plots for the Multidimensional Three-Parameter Logistic Model

    ERIC Educational Resources Information Center

    Bryant, Damon; Davis, Larry

    2011-01-01

    This brief technical note describes how to construct item vector plots for dichotomously scored items fitting the multidimensional three-parameter logistic model (M3PLM). As multidimensional item response theory (MIRT) shows promise of being a very useful framework in the test development life cycle, graphical tools that facilitate understanding…

  9. A Bayesian Method for Evaluating Trainee Proficiency. Technical Paper 323.

    ERIC Educational Resources Information Center

    Epstein, Kenneth I.; Steinheiser, Frederick H., Jr.

    A multiparameter, programmable model was developed to examine the interactive influence of certain parameters on the probability of deciding that an examinee had attained a specified degree of mastery. It was applied within the simulated context of performance testing of military trainees. These parameters included: (1) the number of assumed…

  10. Distributed Item Review: Administrator User Guide. Technical Report #1603

    ERIC Educational Resources Information Center

    Irvin, P. Shawn

    2016-01-01

    The Distributed Item Review (DIR) is a secure and flexible, web-based system designed to present test items to expert reviewers across a broad geographic area for evaluation of important dimensions of quality (e.g., alignment with standards, bias, sensitivity, and student accessibility). The DIR is comprised of essential features that allow system…

  11. NASA-ASEE-Stanford Summer Faculty Fellowship Program

    NASA Technical Reports Server (NTRS)

    1996-01-01

    This report presents the essential features and highlights of the 1996 Summer Faculty Fellowship Program at Ames Research Center and Dryden Flight Research Center in a comprehensive and concise form. Summary reports describing the fellow's technical accomplishments are enclosed. Of the 32 participating fellows, 27 were at Ames and 5 were at Dryden.

  12. Working for Clean Water, 2: Citizen Handbooks. An Information Program for Advisory Groups.

    ERIC Educational Resources Information Center

    Stoltzfus, Lorna Chr., Ed.

    Presented is material from an information program designed to help citizen advisory groups and local officials improve decision-making in water quality planning. This program is aimed at helping people focus on essential issues and questions by providing materials suitable for persons with non-technical backgrounds. The following chapters are…

  13. Lessons from Successes in Medical Communication Training and Their Applications to Accounting Education

    ERIC Educational Resources Information Center

    Daff, Lyn

    2012-01-01

    Accountants interact with people from diverse backgrounds. While accounting knowledge and technical skills are essential, it is well-developed interpersonal skills that will enhance their relationships with clients and staff alike. Similarly, patients want their doctors to have extensive medical knowledge and an agreeable bedside manner. To…

  14. Technohubs in Teacher Education: The Lived Experience of Assisting Peers with Instructional Technology Issues

    ERIC Educational Resources Information Center

    Rook, Michael Montalto

    2014-01-01

    This study examined prospective teachers' lived experiences of assisting peers with instructional technology issues. The study built upon one of ISTE's (2003) essential conditions for integrating technology in education: technical assistance for using technology. Through a review of relevant literature, an argument was made for the study based on…

  15. Visiting Scholars Program in Building Science at UC Berkeley

    Science.gov Websites

    part of the evaluation process, as it is essential that there is a relationship between your interests and the research being conducted at CBE. Visiting scholars must have some prior research experience with information on education, research experience, papers published and technical skills (e.g

  16. [The nurse-healthcare assistant partnership: a learning tool?].

    PubMed

    Martin, Yolaine; Chauzy, Sébastien; Pasticcio, Denise; Blivet, Annie

    2015-02-01

    In intensive care, working in a nurse-healthcare assistant partnership is essential. It facilitates the way they receive the patient, organise and work together in performing technical procedures, provide personal care and comfort and compensate for a decrease in or loss of autonomy. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  17. Science, Technology and Society--An Authentic Exploration of IR Thermometers Application in Schools

    ERIC Educational Resources Information Center

    Tse, Isaac Pak Hoi; Leung, Winston Kwok Kuen; Chan, Shing Yi

    2004-01-01

    "Science, Technology and Society" was identified an essential strand in the new Science Education curriculum guide. Shortly after the severe acute respiratory syndrome (SARS) threat to Hong Kong technical dealers introduced Infrared non-contact thermometers as a solution for schools to measure body temperature for a large number of…

  18. Student and Instructor Perceptions of Feedback in Asynchronous Online Learning: A Mixed-Methods Study

    ERIC Educational Resources Information Center

    Conrad, Susan

    2016-01-01

    Research about online learning suggests that instructor feedback is essential for student learning, especially when the feedback is personalized, specific, and timely. Feedback enhances instructor presence in online learning and has been shown to positively affect student outcomes. However, even with the technical ability to receive feedback at…

  19. Student War Loans Program: Final Report. Bulletin, 1946, No. 14

    ERIC Educational Resources Information Center

    Flynt, R. C. M.

    1946-01-01

    The Student War Loans Program, officially "Loans to Students in Technical and Professional Fields (National Defense)," was one of five essential wartime programs administered by the U. S. Office of Education. The Division of Higher Education administered two of these programs, namely, the Engineering, Science and Management War Training Program…

  20. Using Kinesiology: A Comparison of Applied Veins in the Subdisciplines. The Twenty-sixth Amy Morris Honors Lecture 1992.

    ERIC Educational Resources Information Center

    Harris, Janet C.

    1993-01-01

    Compares three domains in kinesiology with regard to essential professional competencies: biophysical sciences focused on exercise and sport, behavioral/sociocultural sciences focused on sport, and pedagogical sciences focused on school physical education. The paper compares the relative emphases placed on technical and critical/reflective…

  1. User Situational Context: An Essential Challenge to Context Awareness

    ERIC Educational Resources Information Center

    Mowafi, Yaser Abdallah

    2009-01-01

    Existing research on context and context awareness has broadly focused on the technical aspects of context acquisition and interpretation of users' surroundings, also called physical or sensor-based context. Such an approach has lacked from reconciling the perception of real-world context exhibited by humans, also known as user context, and…

  2. Using Popular Magazine Articles to Teach the Art of Writing for Nontechnical Audiences

    ERIC Educational Resources Information Center

    Sivey, John D.; Lee, Cindy M.

    2008-01-01

    Many undergraduate chemistry curricula are devoting increasing amounts of time to teaching technical writing skills. Significantly less attention, however, is given toward training students in nontechnical writing strategies. The ability of chemistry students to communicate effectively in writing to a wide variety of audiences is an essential (and…

  3. SBOs Share Their Thoughts: Essential Technical and Leadership Skills

    ERIC Educational Resources Information Center

    McClain, E. Glenn, Jr.; King, Richard A.

    2009-01-01

    As an important cabinet-level position that reports directly to the superintendent and board of education, the school business official (SBO) often holds the second most powerful position in the district. Along with calls for fiscal and educational accountability, this elevated stature underscores the need for business officials to have leadership…

  4. Non-Technical Skills in Undergraduate Degrees in Business: Development and Transfer

    ERIC Educational Resources Information Center

    Jackson, Denise; Hancock, Phil

    2010-01-01

    The development of discipline-specific skills and knowledge is no longer considered sufficient in graduates of Bachelor level degrees in Business. Higher education providers are becoming increasingly responsible for the development of a generic skill set deemed essential in undergraduates. This required skill set comprises a broad range of…

  5. Ohio Financial Services and Risk Management. Technical Competency Profile (TCP).

    ERIC Educational Resources Information Center

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in financial services and risk management. Ohio College Tech Prep Program standards are described, and a key to profile codes is provided. Sample occupations in this career area, such as financial accountant, loan…

  6. Organizational Learning and Product Design Management: Towards a Theoretical Model.

    ERIC Educational Resources Information Center

    Chiva-Gomez, Ricardo; Camison-Zornoza, Cesar; Lapiedra-Alcami, Rafael

    2003-01-01

    Case studies of four Spanish ceramics companies were used to construct a theoretical model of 14 factors essential to organizational learning. One set of factors is related to the conceptual-analytical phase of the product design process and the other to the creative-technical phase. All factors contributed to efficient product design management…

  7. Computer and Network Security in Small Libraries: A Guide for Planning.

    ERIC Educational Resources Information Center

    Williams, Robert L.

    This manual is intended to provide a free resource on essential network security concepts for non-technical managers of small libraries. Managers of other small nonprofit or community organizations will also benefit from it. An introduction defines network security; outlines three goals of network security; discusses why a library should be…

  8. Generalizability of Multiple Measures of Treatment Integrity: Comparisons among Direct Observation, Permanent Products, and Self-Report

    ERIC Educational Resources Information Center

    Gresham, Frank M.; Dart, Evan H.; Collins, Tai A.

    2017-01-01

    The concept of treatment integrity is an essential component to databased decision making within a response-to-intervention model. Although treatment integrity is a topic receiving increased attention in the school-based intervention literature, relatively few studies have been conducted regarding the technical adequacy of treatment integrity…

  9. Frank Callaway 1919-2003: Honorary President of ISME 1988-2003

    ERIC Educational Resources Information Center

    Meyer, John

    2004-01-01

    Frank Callaway, the fourth Honorary President of ISME, was a New Zealander who contributed greatly to raising the profile of music education in both that country and Australia. His essentially democratic view of music education was moulded by his teaching experience at King Edward Technical College in Dunedin. At the University of Western…

  10. Laparoscopic repair of perforated peptic ulcer-technical tip.

    PubMed

    Jayanthi, Naga Venkatesh Gupta

    2013-08-01

    Increasing number of gastrointestinal emergencies are managed laparoscopically. Laparoscopic repair of a perforated peptic ulcer remains contentious. Fashioning an omental patch is a crucial and an essential part of this repair, whether it is performed open or laparoscopically. This article describes a technique to fashion an adequate omental patch over the perforated peptic ulcer.

  11. Some methods for achieving more efficient performance of fuel assemblies

    NASA Astrophysics Data System (ADS)

    Boltenko, E. A.

    2014-07-01

    More efficient operation of reactor plant fuel assemblies can be achieved through the use of new technical solutions aimed at obtaining more uniform distribution of coolant over the fuel assembly section, more intense heat removal on convex heat-transfer surfaces, and higher values of departure from nucleate boiling ratio (DNBR). Technical solutions using which it is possible to obtain more intense heat removal on convex heat-transfer surfaces and higher DNBR values in reactor plant fuel assemblies are considered. An alternative heat removal arrangement is described using which it is possible to obtain a significantly higher power density in a reactor plant and essentially lower maximal fuel rod temperature.

  12. Normative aspects of the human body.

    PubMed

    Siep, Ludwig

    2003-04-01

    In cultural history the human body has been the object of a great variety of opposing valuations, ranging from "imago dei" to "the devil's tool". At present, the body is commonly regarded as a mere means to fulfill the wishes of its "owner". According to these wishes it can be technically improved in an unlimited way. Against this view the text argues for a conception of the human body as a valuable "common heritage". The "normal" human body as the result of natural and cultural history is an essential condition of the modern social and legal order. The consequences of its technical alteration should be the subject of public debates and common decisions.

  13. [The telemedical service centre as an essential element of the conceptual approach for telemonitoring of cardiac patients : Requirements on the service, quality, and technical realization of telemonitoring].

    PubMed

    Helms, T M; Müller, A; Perings, C; Köhler, F; Leonhardt, V; Rybak, K; Sack, S; Stockburger, M

    2017-09-01

    Telemonitoring as part of a treatment strategy supports and facilitates the monitoring, disease management and education of patients with heart failure and cardiac arrhythmias. Therefore, telemonitoring affects quality and success of the therapy. Thus, meeting the needs of the patients and of the involved health care professionals is important for the success of the telemonitoring service. Moreover, a high quality of the service has to be ensured. The following article describes several configuration options for telemonitoring services considering technical as well as quality- and service-related aspects.

  14. Synergetic Use of Principal Component Analysis Applied to Normed Physicochemical Measurements and GC × GC-MS to Reveal the Stabilization Effect of Selected Essential Oils on Heated Rapeseed Oil.

    PubMed

    Sghaier, Lilia; Cordella, Christophe B Y; Rutledge, Douglas N; Lefèvre, Fanny; Watiez, Mickaël; Breton, Sylvie; Sassiat, Patrick; Thiebaut, Didier; Vial, Jérôme

    2017-06-01

    Lipid oxidation leads to the formation of volatile compounds and very often to off-flavors. In the case of the heating of rapeseed oil, unpleasant odors, characterized as a fishy odor, are emitted. In this study, 2 different essential oils (coriander and nutmeg essential oils) were added to refined rapeseed oil as odor masking agents. The aim of this work was to determine a potential antioxidant effect of these essential oils on the thermal stability of rapeseed oil subject to heating cycles between room temperature and 180 °C. For this purpose, normed determinations of different parameters (peroxide value, anisidine value, and the content of total polar compounds, free fatty acids and tocopherols) were carried out to examine the differences between pure and degraded oil. No significant difference was observed between pure rapeseed oil and rapeseed oil with essential oils for each parameter separately. However, a stabilizing effect of the essential oils, with a higher effect for the nutmeg essential oil was highlighted by principal component analysis applied on physicochemical dataset. Moreover, the analysis of the volatile compounds performed by GC × GC showed a substantial loss of the volatile compounds of the essential oils from the first heating cycle. © 2017 Institute of Food Technologists®.

  15. MOESHA: A genetic algorithm for automatic calibration and estimation of parameter uncertainty and sensitivity of hydrologic models

    EPA Science Inventory

    Characterization of uncertainty and sensitivity of model parameters is an essential and often overlooked facet of hydrological modeling. This paper introduces an algorithm called MOESHA that combines input parameter sensitivity analyses with a genetic algorithm calibration routin...

  16. Returns and determinants of technical efficiency in small-scale Malabari goat production units in Kerala, India.

    PubMed

    Alex, Rani; Kunniyoor Cheemani, Raghavan; Thomas, Naicy

    2013-11-01

    A stochastic frontier production function was employed to measure technical efficiency and its determinants in smallholder Malabari goat production units in Kerala, India. Data were obtained from 100 goat farmers in northern Kerala, selected using multistage random sampling. The parameters of the stochastic frontier production function were estimated using the maximum likelihood method. Cost and return analysis showed that the major expenditure was feed and fodder, and veterinary expenses were secondary. The chief returns were the sale of live animals, milk and manure. Individual farm technical efficiency ranged from 0.34 to 0.97 with a mean of 0.88. The study found herd size (number of animal units) and centre (locality of farm) significantly affected technical efficiency, but sex of farmer, education, land size and family size did not. Technical efficiency decreased as herd size increased; half the units with five or more adult animals had technical efficiency below 60 %.

  17. Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

    PubMed

    Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

    2013-12-01

    Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

  18. SELECTIVE DISSEMINATION OF INFORMATION--REVIEW OF SELECTED SYSTEMS AND A DESIGN FOR ARMY TECHNICAL LIBRARIES. FINAL REPORT. ARMY TECHNICAL LIBRARY IMPROVEMENT STUDIES (ATLIS), REPORT NO. 8.

    ERIC Educational Resources Information Center

    BIVONA, WILLIAM A.

    THIS REPORT PRESENTS AN ANALYSIS OF OVER EIGHTEEN SMALL, INTERMEDIATE, AND LARGE SCALE SYSTEMS FOR THE SELECTIVE DISSEMINATION OF INFORMATION (SDI). SYSTEMS ARE COMPARED AND ANALYZED WITH RESPECT TO DESIGN CRITERIA AND THE FOLLOWING NINE SYSTEM PARAMETERS--(1) INFORMATION INPUT, (2) METHODS OF INDEXING AND ABSTRACTING, (3) USER INTEREST PROFILE…

  19. Application of step-frequency radars in medicine

    NASA Astrophysics Data System (ADS)

    Anishchenko, L.; Alekhin, M.; Tataraidze, A.; Ivashov, S.; Bugaev, Alexander S.; Soldovieri, F.

    2014-05-01

    The paper summarizes results of step-frequency radars application in medicine. Remote and non-contact control of physiological parameters with modern bioradars provides a wide range of possibilities for non-contact remote monitoring of a human psycho-emotional state and physiological condition. The paper provides information about technical characteristics of bioradars designed at Bauman Moscow State Technical University and experiments using them. Results of verification experiment showed that bioradars of BioRASCAN type may be used for simultaneous remote measurements of breathing and heart rate parameters. In addition, bioradar assisted experiments for detecting of different sleep disorders are described. Their results proved that method of bioradiolocation allows correct estimation of obstructive sleep apnea severity compared to the polysomnography method, which satisfies standard medical recommendations.

  20. Planning satellite communication services and spectrum-orbit utilization

    NASA Technical Reports Server (NTRS)

    Sawitz, P. H.

    1982-01-01

    The relationship between approaches to planning satellite communication services and spectrum-orbit utilization is considered, with emphasis on the fixed-satellite and the broadcasting-satellite services. It is noted that there are several possible approaches to planning space services, differing principally in the rigidity with which technical parameters are prescribed, in the time for which a plan remains in force, and in the procedures adopted for implementation and modifications. With some planning approaches, spectrum-orbit utilization is fixed at the time the plan is made. Others provide for greater flexibility by making it possible to postpone some decisions on technical parameters. In addition, the two political questions of what is equitable access and how it can be guaranteed in practice play an important role.

  1. Effective atomic numbers and electron densities of some human tissues and dosimetric materials for mean energies of various radiation sources relevant to radiotherapy and medical applications

    NASA Astrophysics Data System (ADS)

    Kurudirek, Murat

    2014-09-01

    Effective atomic numbers, Zeff, and electron densities, neff, are convenient parameters used to characterise the radiation response of a multi-element material in many technical and medical applications. Accurate values of these physical parameters provide essential data in medical physics. In the present study, the effective atomic numbers and electron densities have been calculated for some human tissues and dosimetric materials such as Adipose Tissue (ICRU-44), Bone Cortical (ICRU-44), Brain Grey/White Matter (ICRU-44), Breast Tissue (ICRU-44), Lung Tissue (ICRU-44), Soft Tissue (ICRU-44), LiF TLD-100H, TLD-100, Water, Borosilicate Glass, PAG (Gel Dosimeter), Fricke (Gel Dosimeter) and OSL (Aluminium Oxide) using mean photon energies, Em, of various radiation sources. The used radiation sources are Pd-103, Tc-99, Ra-226, I-131, Ir-192, Co-60, 30 kVp, 40 kVp, 50 kVp (Intrabeam, Carl Zeiss Meditec) and 6 MV (Mohan-6 MV) sources. The Em values were then used to calculate Zeff and neff of the tissues and dosimetric materials for various radiation sources. Different calculation methods for Zeff such as the direct method, the interpolation method and Auto-Zeff computer program were used and agreements and disagreements between the used methods have been presented and discussed. It has been observed that at higher Em values agreement is quite satisfactory (Dif.<5%) between the adopted methods.

  2. Antimicrobial evaluation of novel poly-lactic acid based nanocomposites incorporated with bioactive compounds in-vitro and in refrigerated vacuum-packed cooked sausages.

    PubMed

    Rezaeigolestani, Mohammadreza; Misaghi, Ali; Khanjari, Ali; Basti, Afshin Akhondzadeh; Abdulkhani, Ali; Fayazfar, Samira

    2017-11-02

    Biodegradability and antimicrobial activity of food packaging materials are among the most attractive parameters in modern food industries. In order to develop biodegradable poly-lactic acid (PLA) film to antibacterial nanocomposites, different concentration of Zataria multiflora Bioss. essential oil (ZME), propolis ethanolic extract (PEE) and cellulose nanofiber (CNF) were incorporated to the polymer by solvent casting method. The resulting films were characterized by mechanical and physical tests and their antimicrobial application was evaluated in-vitro against four common foodborne pathogens and in vacuum-packed cooked sausages during refrigerated storage. Mechanical examination revealed that addition of ZME and PEE made films more flexible and incorporation of CNF improved almost all mechanical parameters tested. Moreover, according to physical analysis, incorporation of 0.5% v/v ZME to the composite primary solutions improved water vapor permeability of the resulting films. Almost all of the active films were effective against the tested bacteria except for PLA/PEE films, and maximum antibacterial effects recorded for the films containing both ZME and PEE. Based on the microbiological and sensory evaluation of the sausages, all of the PLA/1%ZME/PEE composites increased the shelf life to >40days. The results indicate that incorporation of natural antimicrobial substances such as ZME and PEE to packaging material could be an interesting approach in development of active packaging material without significant negative effect on polymer technical properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. The impact of active controls technology on the structural integrity of aeronautical vehicles

    NASA Technical Reports Server (NTRS)

    Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

    1993-01-01

    The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

  4. Scientific and Technical Development of the Next Generation Space Telescope

    NASA Technical Reports Server (NTRS)

    Burg, Richard

    2003-01-01

    The Next Generation Space Telescope (NGST) is part of the Origins program and is the key mission to discover the origins of galaxies in the Universe. It is essential that scientific requirements be translated into technical specifications at the beginning of the program and that there is technical participation by astronomers in the design and modeling of the observatory. During the active time period of this grant, the PI participated in the NGST program at GSFC by participating in the development of the Design Reference Mission, the development of the full end-to-end model of the observatory, the design trade-off based on the modeling, the Science Instrument Module definition and modeling, the study of proto-mission and test-bed development, and by participating in meetings including quarterly reviews and support of the NGST SWG. This work was documented in a series of NGST Monographs that are available on the NGST web site.

  5. Management of optics. [for HEAO-2 X ray telescope

    NASA Technical Reports Server (NTRS)

    Kirchner, T. E.; Russell, M.

    1981-01-01

    American Science and Engineering, Inc., designed the large X-ray optic for the HEAO-2 X-ray Telescope. The key element in this project was the High Resolution Mirror Assembly (HRMA), subcontracting the fabrication of the optical surfaces and their assembly and alignment. The roles and organization of the key participants in the creation of HRMA are defined, and the degree of interaction between the groups is described. Management of this effort was extremely complex because of the intricate weaving of responsibilities, and AS&E, as HEAO-2 Program managers, needed to be well versed in the scientific objectives, the technical requirements, the program requirements, and the subcontract management. Understanding these factors was essential for implementing both technical and management controls, such as schedule and budget constraints, in-process control, residence requirements, and scientist review and feedback. Despite unforeseen technical problems and interaction differences, the HEAO-2 was built on schedule and to specification.

  6. Environmental literacy framework with a focus on climate change (ELF): a framework and resources for teaching climate change

    NASA Astrophysics Data System (ADS)

    Huffman, L. T.; Blythe, D.; Dahlman, L. E.; Fischbein, S.; Johnson, K.; Kontar, Y.; Rack, F. R.; Kulhanek, D. K.; Pennycook, J.; Reed, J.; Youngman, B.; Reeves, M.; Thomas, R.

    2010-12-01

    The challenges of communicating climate change science to non-technical audiences present a daunting task, but one that is recognized in the science community as urgent and essential. ANDRILL's (ANtarctic geological DRILLing) international network of scientists, engineers, technicians and educators work together to convey a deeper understanding of current geoscience research as well as the process of science to non-technical audiences. One roadblock for educators who recognize the need to teach climate change has been the lack of a comprehensive, integrated set of resources and activities that are related to the National Science Education Standards. Pieces of the climate change puzzle can be found in the excellent work of the groups of science and education professionals who wrote the Essential Principles of Ocean Sciences, Climate Literacy: The Essential Principles of Climate Science, Earth Science Literacy Principles: The Big Ideas and Supporting Concepts of Earth Science, and Essential Principals and Fundamental Concepts for Atmospheric Science Literacy, but teachers have precious little time to search out the climate change goals and objectives in those frameworks and then find the resources to teach them. Through NOAA funding, ANDRILL has created a new framework, The Environmental Literacy Framework with a Focus on Climate Change (ELF), drawing on the works of the aforementioned groups, and promoting an Earth Systems approach to teaching climate change through five units: Atmosphere, Biosphere, Geosphere, Hydrosphere/Cryosphere, and Energy as the driver of interactions within and between the “spheres.” Each key concept in the framework has a hands-on, inquiry activity and matching NOAA resources for teaching the objectives. In its present form, we present a ‘road map’ for teaching climate change and a set of resources intended to continue to evolve over time.

  7. Effects of Calendula Essential Oil-Based Cream on Biochemical Parameters of Skin of Albino Rats against Ultraviolet B Radiation.

    PubMed

    Mishra, Arun K; Mishra, Amrita; Verma, Anurag; Chattopadhyay, Pronobesh

    2012-01-01

    Reactive oxygen species (ROS) generated from UV-B radiation have the capacity to cause oxidative decomposition which leads to the formation of toxic components as well as lipid peroxidation. Considering this fact, the present study was performed to evaluate the effect of a cream (O/W) containing the essential oil of Calendula officinalis on biochemical parameters of the skin of albino rats against UV-B radiation. The fingerprint analysis of Calendula essential oil was performed by HPLC with special reference to 1,8-cineole and α-pinene. The results indicated that the treatment with creams containing 4% and 5% of Calendula essential oil caused a significant decrease in the malonyldialdehyde level, whereas the levels of catalase, glutathione, superoxide dismutase, ascorbic acid, and the total protein level were significantly increased after 1 month of daily irradiation and treatment when compared to untreated control groups. The results suggest that the cutaneous application of the essential oil of Calendula prevents UV-B-induced alterations in the level of antioxidants in skin tissue.

  8. Effects of Calendula Essential Oil-Based Cream on Biochemical Parameters of Skin of Albino Rats against Ultraviolet B Radiation

    PubMed Central

    Mishra, Arun K.; Mishra, Amrita; Verma, Anurag; Chattopadhyay, Pronobesh

    2012-01-01

    Reactive oxygen species (ROS) generated from UV-B radiation have the capacity to cause oxidative decomposition which leads to the formation of toxic components as well as lipid peroxidation. Considering this fact, the present study was performed to evaluate the effect of a cream (O/W) containing the essential oil of Calendula officinalis on biochemical parameters of the skin of albino rats against UV-B radiation. The fingerprint analysis of Calendula essential oil was performed by HPLC with special reference to 1,8-cineole and α-pinene. The results indicated that the treatment with creams containing 4% and 5% of Calendula essential oil caused a significant decrease in the malonyldialdehyde level, whereas the levels of catalase, glutathione, superoxide dismutase, ascorbic acid, and the total protein level were significantly increased after 1 month of daily irradiation and treatment when compared to untreated control groups. The results suggest that the cutaneous application of the essential oil of Calendula prevents UV-B-induced alterations in the level of antioxidants in skin tissue. PMID:23008814

  9. Microsurgical Bypass Training Rat Model, Part 1: Technical Nuances of Exposure of the Aorta and Iliac Arteries.

    PubMed

    Tayebi Meybodi, Ali; Lawton, Michael T; Mokhtari, Pooneh; Yousef, Sonia; Gandhi, Sirin; Benet, Arnau

    2017-11-01

    Animal models using rodents are frequently used for practicing microvascular anastomosis-an essential technique in cerebrovascular surgery. However, safely and efficiently exposing rat's target vessels is technically difficult. Such difficulty may lead to excessive hemorrhage and shorten animal survival. This limits the ability to perform multiple anastomoses on a single animal and may increase the overall training time and costs. We report our model for microsurgical bypass training in rodents in 2 consecutive articles. In part 1, we describe the technical nuances for a safe and efficient exposure of the rat abdominal aorta and common iliac arteries (CIAs) for bypass. Over a 2-year period, 50 Sprague-Dawley rats underwent inhalant anesthesia for practicing microvascular anastomosis on the abdominal aorta and CIAs. Lessons learned regarding the technical nuances of vessel exposure were recorded. Several technical nuances were important for avoiding intraoperative bleeding and preventing animal demise while preparing an adequate length of vessels for bypass. The most relevant technical nuances include (1) generous subcutaneous dissection; (2) use of cotton swabs for the blunt dissection of the retroperitoneal fat; (3) combination of sharp and blunt dissection to isolate the aorta and iliac arteries from the accompanying veins; (4) proper control of the posterior branches of the aorta; and (5) efficient division and mobilization of the left renal pedicle. Applying the aforementioned technical nuances enables safe and efficient preparation of the rat abdominal aorta and CIAs for microvascular anastomosis. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Development and evaluation of a patient-centred measurement tool for surgeons' non-technical skills.

    PubMed

    Yule, J; Hill, K; Yule, S

    2018-06-01

    Non-technical skills are essential for safe and effective surgery. Several tools to assess surgeons' non-technical skills from the clinician's perspective have been developed. However, a reliable measurement tool using a patient-centred approach does not currently exist. The aim of this study was to translate the existing Non-Technical Skills for Surgeons (NOTSS) tool into a patient-centred evaluation tool. Data were gathered from four cohorts of patients using an iterative four-stage mixed-methods research design. Exploratory and confirmatory factor analyses were performed to establish the psychometric properties of the tool, focusing on validity, reliability, usability and parsimony. Some 534 patients were recruited to the study. A total of 24 patient-centred non-technical skill items were developed in stage 1, and reduced to nine items in stage 2 using exploratory factor analysis. In stage 3, confirmatory factor analysis demonstrated that these nine items each loaded on to one of three factors, with excellent internal consistency: decision-making, leadership, and communication and teamwork. In stage 4, validity testing established that the new tool was independent of physician empathy and predictive of surgical quality. Surgical leadership emerged as the most dominant skill that patients could recognize and evaluate. A novel nine-item assessment tool has been developed. The Patients' Evaluation of Non-Technical Skills (PENTS) tool allows valid and reliable measurement of surgeons' non-technical skills from the patient perspective. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

  11. Case Studies of Rock Bursts Under Complicated Geological Conditions During Multi-seam Mining at a Depth of 800 m

    NASA Astrophysics Data System (ADS)

    Zhao, Tong-bin; Guo, Wei-yao; Tan, Yun-liang; Yin, Yan-chun; Cai, Lai-sheng; Pan, Jun-feng

    2018-05-01

    A serious rock burst ("4.19" event) occurred on 19 April 2016 in the No. 4 working face of the No. 10 coal seam in Da'anshan Coal Mine, Jingxi Coalfield. According to the China National Seismological Network, a 2.7 magnitude earthquake was simultaneously recorded in this area. The "4.19" event resulted in damage to the entire longwall face and two gateways that were 105 m in long. In addition, several precursor bursts and mine earthquakes had occurred between October 2014 and April 2016 in the two uphill roadways and the No. 4 working face. In this paper, the engineering geological characteristics and in situ stress field are provided, and then the rock burst distributions are introduced. Next, the temporal and spatial characteristics, geological and mining conditions, and other related essential information are reviewed in detail. The available evidence and possible explanations for the rock burst mechanisms are also presented and discussed. Based on the description and analysis of these bursts, a detailed classification system of rock burst mechanisms is established. According to the main causes and different disturbance stresses (i.e., high/low disturbance stresses and far-field/near-field high disturbance stresses), there are a total of nine types of rock bursts. Thus, some guidelines for controlling or mitigating different types of rock bursts are provided. These experiences and strategies not only provide an essential reference for understanding the different rock burst mechanisms, but also build a critical foundation for selecting mitigation measures and optimizing the related technical parameters during mining or tunnelling under similar conditions.

  12. Reliable assessment of general surgeons' non-technical skills based on video-recordings of patient simulated scenarios.

    PubMed

    Spanager, Lene; Beier-Holgersen, Randi; Dieckmann, Peter; Konge, Lars; Rosenberg, Jacob; Oestergaard, Doris

    2013-11-01

    Nontechnical skills are essential for safe and efficient surgery. The aim of this study was to evaluate the reliability of an assessment tool for surgeons' nontechnical skills, Non-Technical Skills for Surgeons dk (NOTSSdk), and the effect of rater training. A 1-day course was conducted for 15 general surgeons in which they rated surgeons' nontechnical skills in 9 video recordings of scenarios simulating real intraoperative situations. Data were gathered from 2 sessions separated by a 4-hour training session. Interrater reliability was high for both pretraining ratings (Cronbach's α = .97) and posttraining ratings (Cronbach's α = .98). There was no statistically significant development in assessment skills. The D study showed that 2 untrained raters or 1 trained rater was needed to obtain generalizability coefficients >.80. The high pretraining interrater reliability indicates that videos were easy to rate and Non-Technical Skills for Surgeons dk easy to use. This implies that Non-Technical Skills for Surgeons dk (NOTSSdk) could be an important tool in surgical training, potentially improving safety and quality for surgical patients. Copyright © 2013 Elsevier Inc. All rights reserved.

  13. Measurement of Perceived and Technical Quality of Care for Depression in Racially and Ethnically Diverse Groups.

    PubMed

    Leff, H Stephen; Chow, Clifton; Wieman, Dow A; Ostrow, Laysha; Cortés, Dharma E; Harris, Treniece

    2016-08-01

    Measurement of patient satisfaction is now considered essential for providing patient centered care and is an important tool for addressing health care disparities. However, little is known about how ethnically and racially diverse (ERD) groups differ in how they perceive quality, and widely used instruments for measuring perceived quality give little attention to cultural elements of care. This study examined the relationship between the culturally determined beliefs and expectations of four ERD groups (African Americans, Latinos, Portuguese-speakers, and Haitians, total N = 160) and the technical quality of treatment for depression provided in four "culturally-specific" primary care clinics. Using data from the Experiences of Care and Health Outcomes survey, chart reviews and focus groups, the study addressed a set of questions related to the psychometric properties of perceived care measures and the technical quality of care. The groups differed in preferred cultural elements except all preferred inclusion of religion. They did not differ in overall perceived quality. Technical quality was higher for Portuguese and Haitians than for African Americans and Latinos. Implications of group differences for measuring quality are discussed.

  14. Creating an Environmental Justice Framework for Policy Change in Childhood Asthma: A Grassroots to Treetops Approach

    PubMed Central

    Sargent, Katherine; Arons, Abigail; Standish, Marion; Brindis, Claire D.

    2011-01-01

    Objectives. The Community Action to Fight Asthma Initiative, a network of coalitions and technical assistance providers in California, employed an environmental justice approach to reduce risk factors for asthma in school-aged children. Policy advocacy focused on housing, schools, and outdoor air quality. Technical assistance partners from environmental science, policy advocacy, asthma prevention, and media assisted in advocacy. An evaluation team assessed progress and outcomes. Methods. A theory of change and corresponding logic model were used to document coalition development and successes. Site visits, surveys, policymaker interviews, and participation in meetings documented the processes and outcomes. Quantitative and qualitative data were analyzed to assess strategies, successes, and challenges. Results. Coalitions, working with community residents and technical assistance experts, successfully advocated for policies to reduce children's exposures to environmental triggers, particularly in low-income communities and communities of color. Policies were implemented at various levels. Conclusions. Environmental justice approaches to policy advocacy could be an effective strategy to address inequities across communities. Strong technical assistance, close community involvement, and multilevel strategies were all essential to effective policies to reduce environmental inequities. PMID:21836108

  15. The GTN-P Data Management System: A central database for permafrost monitoring parameters of the Global Terrestrial Network for Permafrost (GTN-P) and beyond

    NASA Astrophysics Data System (ADS)

    Lanckman, Jean-Pierre; Elger, Kirsten; Karlsson, Ævar Karl; Johannsson, Halldór; Lantuit, Hugues

    2013-04-01

    Permafrost is a direct indicator of climate change and has been identified as Essential Climate Variable (ECV) by the global observing community. The monitoring of permafrost temperatures, active-layer thicknesses and other parameters has been performed for several decades already, but it was brought together within the Global Terrestrial Network for Permafrost (GTN-P) in the 1990's only, including the development of measurement protocols to provide standardized data. GTN-P is the primary international observing network for permafrost sponsored by the Global Climate Observing System (GCOS) and the Global Terrestrial Observing System (GTOS), and managed by the International Permafrost Association (IPA). All GTN-P data was outfitted with an "open data policy" with free data access via the World Wide Web. The existing data, however, is far from being homogeneous: it is not yet optimized for databases, there is no framework for data reporting or archival and data documentation is incomplete. As a result, and despite the utmost relevance of permafrost in the Earth's climate system, the data has not been used by as many researchers as intended by the initiators of the programs. While the monitoring of many other ECVs has been tackled by organized international networks (e.g. FLUXNET), there is still no central database for all permafrost-related parameters. The European Union project PAGE21 created opportunities to develop this central database for permafrost monitoring parameters of GTN-P during the duration of the project and beyond. The database aims to be the one location where the researcher can find data, metadata, and information of all relevant parameters for a specific site. Each component of the Data Management System (DMS), including parameters, data levels and metadata formats were developed in cooperation with the GTN-P and the IPA. The general framework of the GTN-P DMS is based on an object oriented model (OOM), open for as many parameters as possible, and implemented into a spatial database. To ensure interoperability and enable potential inter-database search, field names are following international metadata standards and are based on a control vocabulary registry. Tools are developed to provide data processing, analysis capability, and quality control. Our system aims to be a reference model, improvable and reusable. It allows a maximum top-down and bottom-up data flow, giving scientists one global searchable data and metadata repository, the public a full access to scientific data, and the policy maker a powerful cartographic and statistical tool. To engage the international community in GTN-P, it was essential to develop an online interface for data upload. Aim for this was that it is easy-to-use and allows data input with a minimum of technical and personal effort. In addition to this, large efforts will have to be produced in order to be able to query, visualize and retrieve information over many platforms and type of measurements. Ultimately, it is not the layer in itself that matter, but more the relationship that these information layers maintain with each other.

  16. The prediction of the residual life of electromechanical equipment based on the artificial neural network

    NASA Astrophysics Data System (ADS)

    Zhukovskiy, Yu L.; Korolev, N. A.; Babanova, I. S.; Boikov, A. V.

    2017-10-01

    This article is devoted to the prediction of the residual life based on an estimate of the technical state of the induction motor. The proposed system allows to increase the accuracy and completeness of diagnostics by using an artificial neural network (ANN), and also identify and predict faulty states of an electrical equipment in dynamics. The results of the proposed system for estimation the technical condition are probability technical state diagrams and a quantitative evaluation of the residual life, taking into account electrical, vibrational, indirect parameters and detected defects. Based on the evaluation of the technical condition and the prediction of the residual life, a decision is made to change the control of the operating and maintenance modes of the electric motors.

  17. Track Geometry Development : UMTA Urban Rail Supporting Technology Program

    DOT National Transportation Integrated Search

    1974-04-01

    Measurement of transit system track geometry parameters, under normal operating conditions, is essential for planning and conducting an effective maintenance program. The pertinent parameters are profile, gage, alignment, and cross level. Present met...

  18. Determination of capacity of single-toggle jaw crusher, taking into account parameters of kinematics of its working mechanism

    NASA Astrophysics Data System (ADS)

    Golikov, N. S.; Timofeev, I. P.

    2018-05-01

    Efficiency increase of jaw crushers makes the foundation of rational kinematics and stiffening of the elements of the machine possible. Foundation of rational kinematics includes establishment of connection between operation mode parameters of the crusher and its technical characteristics. The main purpose of this research is just to establish such a connection. Therefore this article shows analytical procedure of getting connection between operation mode parameters of the crusher and its capacity. Theoretical, empirical and semi-empirical methods of capacity determination of a single-toggle jaw crusher are given, taking into account physico-mechanical properties of crushed material and kinematics of the working mechanism. When developing a mathematical model, the method of closed vector polygons by V. A. Zinoviev was used. The expressions obtained in the article give an opportunity to solve important scientific and technical problems, connected with finding the rational kinematics of the jaw crusher mechanism, carrying out a comparative assessment of different crushers and giving the recommendations about updating the available jaw crushers.

  19. A combined model to assess technical and economic consequences of changing conditions and management options for wastewater utilities.

    PubMed

    Giessler, Mathias; Tränckner, Jens

    2018-02-01

    The paper presents a simplified model that quantifies economic and technical consequences of changing conditions in wastewater systems on utility level. It has been developed based on data from stakeholders and ministries, collected by a survey that determined resulting effects and adapted measures. The model comprises all substantial cost relevant assets and activities of a typical German wastewater utility. It consists of three modules: i) Sewer for describing the state development of sewer systems, ii) WWTP for process parameter consideration of waste water treatment plants (WWTP) and iii) Cost Accounting for calculation of expenses in the cost categories and resulting charges. Validity and accuracy of this model was verified by using historical data from an exemplary wastewater utility. Calculated process as well as economic parameters shows a high accuracy compared to measured parameters and given expenses. Thus, the model is proposed to support strategic, process oriented decision making on utility level. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Diverse knowledges and competing interests: an essay on socio-technical problem-solving.

    PubMed

    di Norcia, Vincent

    2002-01-01

    Solving complex socio-technical problems, this paper claims, involves diverse knowledges (cognitive diversity), competing interests (social diversity), and pragmatism. To explain this view, this paper first explores two different cases: Canadian pulp and paper mill pollution and siting nuclear reactors in systematically sensitive areas of California. Solving such socio-technically complex problems involves cognitive diversity as well as social diversity and pragmatism. Cognitive diversity requires one to not only recognize relevant knowledges but also to assess their validity. Finally, it is suggested, integrating the resultant set of diverse relevant and valid knowledges determines the parameters of the solution space for the problem.

  1. Identification of mine rescue equipment reduction gears technical condition

    NASA Astrophysics Data System (ADS)

    Gerike, B. L.; Klishin, V. I.; Kuzin, E. G.

    2017-09-01

    The article presents the reasons for adopting intelligent service of mine belt conveyer drives concerning evaluation of their technical condition based on the diagnostic techniques instead of regular preventative maintenance. The article reveals the diagnostic results of belt conveyer drive reduction gears condition taking into account the parameters of lubricating oil, vibration and temperature. Usage of a complex approach to evaluate technical conditions allows reliability of the forecast to be improved, which makes it possible not only to prevent accidental breakdowns and eliminate unscheduled downtime, but also to bring sufficient economic benefits through reduction of the term and scope of work during overhauls.

  2. An Experimental Device for Real Time Determination of Slant Path Atmospheric Contrast Transmittance.

    DTIC Science & Technology

    1982-03-01

    copies ftom th Defense Technical Information Caster. AN others ioM apply to the National Technical Information Service. UNCLASSIFIED SECURITV...EXPERIMENTAL DEVICE FOR REAL TIME DETERMINATION OF SLANT PATH ATMOSPHERIC CONTRAST TRANSMITTANCE Richard W. Johnson 1. INTRODUCTION 2. BASIC CONCEPTS As...and z is an altitude parameter. primary optical channel uses a cosine corrected and PE- ASSIG SYSTM DEPIS1ttt STAGE I DSIN STAGEM Pgormiy TES

  3. Document Preparation (for Filming). ERIC Processing Manual, Appendix B.

    ERIC Educational Resources Information Center

    Brandhorst, Ted, Ed.; And Others

    The technical report or "fugitive" literature collected by ERIC is produced using a wide variety of printing techniques, many formats, and variable degrees of quality control. Since the documents processed by ERIC go on to be microfilmed and reproduced in microfiche and paper copy for sale to users, it is essential that the ERIC document…

  4. The State of Early Childhood Higher Education in New York State. Technical Report

    ERIC Educational Resources Information Center

    Center for the Study of Child Care Employment, University of California at Berkeley, 2015

    2015-01-01

    The New York State Early Childhood Advisory Council (ECAC) serves the Governor and is charged with ensuring that all of New York's young children are healthy, learning, and thriving in families that are supported by a full complement of services and resources essential for successful development. The council's Workforce Work Group is dedicated to…

  5. Engineering Discourse in the Structure of the ESP Training at Southern Federal University

    ERIC Educational Resources Information Center

    Sidelnik, Ellina; Melnik, Olga; Burenko, Lyudmila

    2016-01-01

    This paper discusses the essentials of engineering discourse in the structure of the ESP training at Southern Federal University (SFU) (Taganrog, Russia). The purpose of this paper is to justify critical rethinking of existing programs of technical students training in foreign languages at SFU taking into account the increasing role of engineering…

  6. The Promise of Law-Related Education as Delinquency Prevention. Technical Assistance Bulletin.

    ERIC Educational Resources Information Center

    Parrini, Michelle, Ed.

    According to the Law Related Education Act of 1978, Law-Related Education (LRE) can be defined as "education to equip nonlawyers with knowledge and skills pertaining to the law, the legal process, the legal system, and the fundamental principles and values on which these are based." LRE teaches essential concepts of democracy, including…

  7. Working for Clean Water, 3: Citizen Handbooks. An Information Program for Advisory Groups.

    ERIC Educational Resources Information Center

    Stoltzfus, Lorna Chr., Ed.

    Presented is material from an information program designed to help citizen advisory groups and local officials improve decision-making in water quality planning. The program is designed to help people focus on essential issues and questions by providing materials suitable for people with non-technical backgrounds. Chapter topics include: (1)…

  8. Advancing Research in the National Science Foundation's Advanced Technological Education Program

    ERIC Educational Resources Information Center

    Wingate, Lori A.

    2017-01-01

    Advanced Technological Education is distinct from typical National Science Foundation programs in that it is essentially a training--not research--program, and most grantees are located at technical and two-year colleges. This article presents empirical data on the status of research in the program, discusses the program's role in supporting NSF's…

  9. Engineering Drawing Practices - Volume I of II: Aerospace and Ground Support Equipment

    NASA Technical Reports Server (NTRS)

    Schwindt, Paul A.

    2015-01-01

    This manual establishes the essential requirements and reference documents for the preparation and revision of digital product definition data sets prepared for or by NASA at KSC. This volume is only applicable to KSC in-house programs/projects. These requirements do not apply to the preparation of illustrations, artwork, or figures in technical publications.

  10. Achieving Professional Excellence: Proceedings of a National Conference on Performance-Based Approaches to Training (Little Rock, Arkansas, October 8-10, 1985).

    ERIC Educational Resources Information Center

    Harrington, Lois G., Comp.; Kalamas, David J., Comp.

    This document contains 47 presentations which focus on professional preparation of personnel in vocational-technical education and industry as an essential step in achieving excellence in educational and industrial training programs. The presentations include "Critical Issues Facing Vocational Teacher Education" (Zellner, Parrish); "A Call for…

  11. A Descriptive Study of Head Start Families: FACES Technical Report I.

    ERIC Educational Resources Information Center

    O'Brien, Robert W.; D'Elio, Mary Ann; Vaden-Kiernan, Michael; Magee, Candice; Younoszai, Tina; Keane, Michael J.; Connell, David C.; Hailey, Linda

    Recognizing that families have played an essential role in the Head Start philosophy since the program's inception, the Head Start Family and Child Experiences Survey (FACES) is an effort to develop a descriptive profile of families participating in the Head Start program and services, as well as to develop, test, and refine Program Performance…

  12. The Effect of Using Cooperative and Individual Weblog to Enhance Writing Performance

    ERIC Educational Resources Information Center

    Karsak, H. Gulhan Orhan; Fer, Seval; Orhan, Feza

    2014-01-01

    Academic writing, whether individual or cooperative, is an essential skill for today's graduates. However, motivating and helping students to learn to write effectively, either in cooperative or individual scenarios, poses many challenges, many of which can be overcome by technical means. The aim of this study is to investigate the effect of using…

  13. ACHP | New and Improved Course: The Section 106 Essentials

    Science.gov Websites

    Interior's Standards for the Treatment of Historic Properties: 36 CFR Part 68 http://www.nps.gov/history Park Service History and Culture Publications http://www.nps.gov/history/index.htm National Park ://www.nps.gov/history/nagpra/ Technical Preservation Services for Historic Buildings http://www.nps.gov/tps

  14. Investigating the Differences between Girls and Boys Regarding the Factors of Frustration, Boredom and Insecurity They Experience during Science Lessons

    ERIC Educational Resources Information Center

    Wegner, Claas; Strehlke, Friederike; Weber, Phillip

    2014-01-01

    Science, technology, engineering and mathematics (STEM) are subjects comprising knowledge whose schooling is essential for every country striving after long-term economic success. Despite the already existing shortage of skilled labour within the mathematic-technical-scientific professional field, men still dominate the respective subjects and…

  15. Canada's School-to-Work Report Card: Grade F.

    ERIC Educational Resources Information Center

    Jarvis, Phillip S.

    Canada's school-to-work transition efforts have failed too many youth and adults because there has not been a framework for essential life and work skills for all to learn. These skills are needed to complement the academic and technical skills now required for completion of formal education and training. The Blueprint for Life and Work Design,…

  16. Global Development of Community Colleges, Technical Colleges, and Further Education Programs

    ERIC Educational Resources Information Center

    Elsner, Paul A., Ed.; Boggs, George R., Ed.; Irwin, Judith T., Ed.

    2008-01-01

    In a global society and economy, education and training is essential to a nation's competitiveness and to the standard of living of its people. The need to open the doors of higher or further education beyond the relatively limited enrollments in elite and selective universities has spawned a movement to develop or expand institutions that are…

  17. Essential Learning Skills in Vocational Technical Education.

    ERIC Educational Resources Information Center

    Oregon State Dept. of Education, Salem. Div. of Vocational Education.

    This document provides basic skill performance expectations for all Oregon students by the end of grade 11 to be incorporated into 15 vocational programs. (Exceptions are that in technology education, the skills identified are only for grade 8; in home economics, the identified skills are for grades 8 and 11.) The skills, which are in reading,…

  18. Youth Prevention. Technical Assistance Packet.

    ERIC Educational Resources Information Center

    Join Together, Boston, MA.

    Prevention is the ultimate key to reversing the upward trend in the use of drugs and to empowering communities to address their drug problems. An essential factor is the development and implementation of initiatives to prevent illicit drug use. A goal of prevention for youth is to provide them with a set of skills and tools to help them resist the…

  19. Educating Nursing Students with Disabilities: Replacing Essential Functions with Technical Standards for Program Entry Criteria

    ERIC Educational Resources Information Center

    Matt, Susan B.; Maheady, Donna; Fleming, Susan E.

    2015-01-01

    Across the globe, students with disabilities have been increasing in prevalence in higher education settings. In the twenty-first century the struggle to include individuals with disabilities into nursing schools and workplaces continues in different parts of the world. Historically, entry criteria in nursing schools have been based on essential…

  20. The Effect of Vee Maps and Laboratory Reports on High- and Low-Order Content-Knowledge Achievement in Agriscience Education

    ERIC Educational Resources Information Center

    Thoron, Andrew C.; Rubenstein, Eric D.

    2013-01-01

    Instruction in the laboratory is essential to the success of a total agricultural education program. The development of students' critical thinking, argumentation skills, technical skills, reasoning ability, and engagement are all found within the agriscience laboratory. Yet, utilizing the laboratory setting to its maximum potential is challenging…

  1. Contingency Software in Autonomous Systems: Technical Level Briefing

    NASA Technical Reports Server (NTRS)

    Lutz, Robyn R.; Patterson-Hines, Ann

    2006-01-01

    Contingency management is essential to the robust operation of complex systems such as spacecraft and Unpiloted Aerial Vehicles (UAVs). Automatic contingency handling allows a faster response to unsafe scenarios with reduced human intervention on low-cost and extended missions. Results, applied to the Autonomous Rotorcraft Project and Mars Science Lab, pave the way to more resilient autonomous systems.

  2. Supporting the extensive dairy sheep smallholders of the semi-arid region of Crete through technical intervention.

    PubMed

    Volanis, M; Stefanakis, A; Hadjigeorgiou, I; Zoiopoulos, P

    2007-06-01

    The objective of this field study was to depict the extensive system of dairy sheep farming in the semi-arid environment of the island of Crete and to assess the potential margins of improvement through technical intervention. Forty-three family-run farms keeping a total of 13,870 sheep were surveyed in seven representative areas of the island. Several parameters were dealt with, concerning socio-economy, flock management and productivity. Study areas differed widely regarding feeds supplied per sheep, land cultivated for feeds, grazing land utilized and housing space. A range of parameters were recorded on flock size and their production characteristics such as births, fertility and number of lambs weaned. Milk yield and parameters associated with milk quality, such as somatic cell counts and total microbial flora, were also recorded. Technical intervention was directed towards removal of non-productive animals, programming of matings, balancing of diets, management of grazing lands and health care. Ewe fertility and numbers of lambs weaned per ewe, as well as harvested milk and milk quality (based on somatic cell counts and microbial load of milk) were also significantly improved. Information derived from this study stresses the important role of extension services to small farm sustainability and contributes to our knowledge of the dairy sheep farming systems in countries around the Mediterranean and elsewhere.

  3. Study on fabrication technology of silicon-based silica array waveguide grating

    NASA Astrophysics Data System (ADS)

    Sun, Yanjun; Dong, Lianhe; Leng, Yanbing

    2009-05-01

    Array waveguide grating (AWG) is an important plane optical element in dense wavelength division multiplex/demultiplex system. There are many virtue, channel quantity larger,lower loss, lower crosstalk, size smaller and high reliability etc. This article describs AWG fabrication technics utilizing IC(Integrated Circles) techniques, based on sixteen channel Silicon-Based Silica Array Waveguide Grating, put emphasis on discussing doping and deposition of waveguide core film,technics theory and interrelated parameter condition of photoetch and ion etching. Experiment result indicates that it depens on electrode structure, energy of radio-frequency electrode gas component, pressure ,flowing speed and substrate temperature by CVD depositing film .During depositing waveguide film by PE-CVD, the silicon is not reacted, When temperature becomes lower,it is reacted and it is easy to realize the control of film thickness and time with a result of film thickness uniformity reaching about 4% after optimizing deposition parameter and condition. We get the result of high etching speed rate, outline zoom, and side frame smooth by photoresist/Cr multiple mask and optimizing etching technics.

  4. THE “NURSING CRISIS”

    PubMed Central

    McVeagh, Thos. C.

    1949-01-01

    Three concrete proposals are made for the improvement of the present nursing situation: 1. Make nursing education more easily available by holding the prerequisites to a minimum and concentrating upon the real essentials of nursing, granting the student the R.N. degree when she has completed this basic and essential training. 2. Utilize more fully the principles of group nursing as applied to “specialing” whether in the home or in the hospital. 3. Completely avoid the use of sub-standard nurses, while furnishing to the nurse such non-technical service (through the use of maid assistants or others) as shall make practicable the complete utilization of her skill and training. PMID:18144757

  5. Enhancing performance of next generation FSO communication systems using soft computing-based predictions.

    PubMed

    Kazaura, Kamugisha; Omae, Kazunori; Suzuki, Toshiji; Matsumoto, Mitsuji; Mutafungwa, Edward; Korhonen, Timo O; Murakami, Tadaaki; Takahashi, Koichi; Matsumoto, Hideki; Wakamori, Kazuhiko; Arimoto, Yoshinori

    2006-06-12

    The deterioration and deformation of a free-space optical beam wave-front as it propagates through the atmosphere can reduce the link availability and may introduce burst errors thus degrading the performance of the system. We investigate the suitability of utilizing soft-computing (SC) based tools for improving performance of free-space optical (FSO) communications systems. The SC based tools are used for the prediction of key parameters of a FSO communications system. Measured data collected from an experimental FSO communication system is used as training and testing data for a proposed multi-layer neural network predictor (MNNP) used to predict future parameter values. The predicted parameters are essential for reducing transmission errors by improving the antenna's accuracy of tracking data beams. This is particularly essential for periods considered to be of strong atmospheric turbulence. The parameter values predicted using the proposed tool show acceptable conformity with original measurements.

  6. Particle-Based Geometric and Mechanical Modelling of Woven Technical Textiles and Reinforcements for Composites

    NASA Astrophysics Data System (ADS)

    Samadi, Reza

    Technical textiles are increasingly being engineered and used in challenging applications, in areas such as safety, biomedical devices, architecture and others, where they must meet stringent demands including excellent and predictable load bearing capabilities. They also form the bases for one of the most widespread group of composite materials, fibre reinforced polymer-matrix composites (PMCs), which comprise materials made of stiff and strong fibres generally available in textile form and selected for their structural potential, combined with a polymer matrix that gives parts their shape. Manufacturing processes for PMCs and technical textiles, as well as parts and advanced textile structures must be engineered, ideally through simulation, and therefore diverse properties of the textiles, textile reinforcements and PMC materials must be available for predictive simulation. Knowing the detailed geometry of technical textiles is essential to predicting accurately the processing and performance properties of textiles and PMC parts. In turn, the geometry taken by a textile or a reinforcement textile is linked in an intricate manner to its constitutive behaviour. This thesis proposes, investigates and validates a general numerical tool for the integrated and comprehensive analysis of textile geometry and constitutive behaviour as required toward engineering applications featuring technical textiles and textile reinforcements. The tool shall be general with regards to the textiles modelled and the loading cases applied. Specifically, the work aims at fulfilling the following objectives: 1) developing and implementing dedicated simulation software for modelling textiles subjected to various load cases; 2) providing, through simulation, geometric descriptions for different textiles subjected to different load cases namely compaction, relaxation and shear; 3) predicting the constitutive behaviour of the textiles undergoing said load cases; 4) identifying parameters affecting the textile geometry and constitutive behaviour under evolving loading; 5) validating simulation results with experimental trials; and 6) demonstrating the applicability of the simulation procedure to textile reinforcements featuring large numbers of small fibres as used in PMCs. As a starting point, the effects of reinforcement configuration on the in-plane permeability of textile reinforcements, through-thickness thermal conductivity of PMCs and in-plane stiffness of unidirectional and bidirectional PMCs were quantified systematically and correlated with specific geometric parameters. Variability was quantified for each property at a constant fibre volume fraction. It was observed that variability differed strongly between properties; as such, the simulated behaviour can be related to variability levels seen in experimental measurements. The effects of the geometry of textile reinforcements on the aforementioned processing and performance properties of the textiles and PMCs made from these textiles was demonstrated and validated, but only for simple cases as thorough and credible geometric models were not available at the onset of this work. Outcomes of this work were published in a peer-reviewed journal [101]. Through this thesis it was demonstrated that predicting changes in textile geometry prior and during loading is feasible using the proposed particle-based modelling method. The particle-based modelling method relies on discrete mechanics and offers an alternative to more traditional methods based on continuum mechanics. Specifically it alleviates issues caused by large strains and management of intricate, evolving contact present in finite element simulations. The particle-based modelling method enables credible, intricate modelling of the geometry of textiles at the mesoscopic scale as well as faithful mechanical modelling under load. Changes to textile geometry and configuration due to the normal compaction pressure, stress relaxation, in-plane shear and other types of loads were successfully predicted.

  7. Effect of cassava starch-based edible coating incorporated with lemongrass essential oil on the quality of papaya MJ9

    NASA Astrophysics Data System (ADS)

    Praseptiangga, D.; Utami, R.; Khasanah, L. U.; Evirananda, I. P.; Kawiji

    2017-02-01

    Edible films and coatings have emerged as an alternative packaging in food applications and have received much attention due to their advantages. The incorporation of essential oils in film matrices to give antimicrobial properties had been observed recently, and could be used as promising preservation technology. In this study, cassava starch-based edible coating incorporated with lemongrass essential oil (1%) was applied by spraying and dipping methods to preserve papaya MJ9 during storage at room temperature. The quality of papaya MJ9 was analyzed based on its physicochemical and microbiological properties. The addition of lemongrass essential oil (1%) significantly inhibited the microbial growth on papaya MJ9 by reducing the value of total yeast and mold as compared to the control. This study also showed that for parameters of weight loss, total soluble solid, vitamin C, and total titratable acid, papaya MJ9 with cassava starch-based edible coating incorporated with lemongrass essential oil (1%) had the lower values than control, however, they had the higher value than control on firmness parameter. These results indicate that cassava starch-based edible coating incorporated with lemongrass essential oil (1%) can be used as an alternative preservation for papaya MJ9.

  8. Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

    NASA Technical Reports Server (NTRS)

    Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

    2001-01-01

    Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

  9. Stochastic Frontier Model Approach for Measuring Stock Market Efficiency with Different Distributions

    PubMed Central

    Hasan, Md. Zobaer; Kamil, Anton Abdulbasah; Mustafa, Adli; Baten, Md. Azizul

    2012-01-01

    The stock market is considered essential for economic growth and expected to contribute to improved productivity. An efficient pricing mechanism of the stock market can be a driving force for channeling savings into profitable investments and thus facilitating optimal allocation of capital. This study investigated the technical efficiency of selected groups of companies of Bangladesh Stock Market that is the Dhaka Stock Exchange (DSE) market, using the stochastic frontier production function approach. For this, the authors considered the Cobb-Douglas Stochastic frontier in which the technical inefficiency effects are defined by a model with two distributional assumptions. Truncated normal and half-normal distributions were used in the model and both time-variant and time-invariant inefficiency effects were estimated. The results reveal that technical efficiency decreased gradually over the reference period and that truncated normal distribution is preferable to half-normal distribution for technical inefficiency effects. The value of technical efficiency was high for the investment group and low for the bank group, as compared with other groups in the DSE market for both distributions in time- varying environment whereas it was high for the investment group but low for the ceramic group as compared with other groups in the DSE market for both distributions in time-invariant situation. PMID:22629352

  10. Stochastic frontier model approach for measuring stock market efficiency with different distributions.

    PubMed

    Hasan, Md Zobaer; Kamil, Anton Abdulbasah; Mustafa, Adli; Baten, Md Azizul

    2012-01-01

    The stock market is considered essential for economic growth and expected to contribute to improved productivity. An efficient pricing mechanism of the stock market can be a driving force for channeling savings into profitable investments and thus facilitating optimal allocation of capital. This study investigated the technical efficiency of selected groups of companies of Bangladesh Stock Market that is the Dhaka Stock Exchange (DSE) market, using the stochastic frontier production function approach. For this, the authors considered the Cobb-Douglas Stochastic frontier in which the technical inefficiency effects are defined by a model with two distributional assumptions. Truncated normal and half-normal distributions were used in the model and both time-variant and time-invariant inefficiency effects were estimated. The results reveal that technical efficiency decreased gradually over the reference period and that truncated normal distribution is preferable to half-normal distribution for technical inefficiency effects. The value of technical efficiency was high for the investment group and low for the bank group, as compared with other groups in the DSE market for both distributions in time-varying environment whereas it was high for the investment group but low for the ceramic group as compared with other groups in the DSE market for both distributions in time-invariant situation.

  11. Effect of technical parameters on transjugular intrahepatic portosystemic shunts utilizing stent grafts.

    PubMed

    Andring, Brice; Kalva, Sanjeeva P; Sutphin, Patrick; Srinivasa, Rajiv; Anene, Alvin; Burrell, Marc; Xi, Yin; Pillai, Anil K

    2015-07-14

    To assess the effect of technical parameters on outcomes of transjugular intrahepatic portosystemic shunt (TIPS) created using a stent graft. The medical records of 68 patients who underwent TIPS placement with a stent graft from 2008 to 2014 were reviewed by two radiologists blinded to the patient outcomes. Digital Subtraction Angiographic images with a measuring catheter in two orthogonal planes was used to determine the TIPS stent-to-inferior vena cava distance (SIVCD), hepatic vein to parenchymal tract angle (HVTA), portal vein to parenchymal tract angle (PVTA), and the accessed portal vein. The length and diameter of the TIPS stent and the use of concurrent variceal embolization were recorded by review of the patient's procedure note. Data on re-intervention within 30 d of TIPS placement, recurrence of symptoms, and survival were collected through the patient's chart. Cox proportional regression analysis was performed to assess the effect of these technical parameters on primary patency of TIPS, time to recurrence of symptoms, and all-cause mortality. There was no significant association between the SIVCD and primary patency (P = 0.23), time to recurrence of symptoms (P = 0.83), or all-cause mortality (P = 0.18). The 3, 6, and 12-mo primary patency rates for a SIVCD ≥ 1.5 cm were 82.4%, 64.7%, and 50.3% compared to 89.3%, 83.8%, and 60.6% for a SIVCD of < 1.5 cm (P = 0.29). The median time to stenosis for a SIVCD of ≥ 1.5 cm was 19.1 mo vs 15.1 mo for a SIVCD of < 1.5 cm (P = 0.48). There was no significant association between the following factors and primary patency: HVTA (P = 0.99), PVTA (P = 0.65), accessed portal vein (P = 0.35), TIPS stent diameter (P = 0.93), TIPS stent length (P = 0.48), concurrent variceal embolization (P = 0.13) and reinterventions within 30 d (P = 0.24). Furthermore, there was no correlation between these technical parameters and time to recurrence of symptoms or all-cause mortality. Recurrence of symptoms was associated with stent graft stenosis (P = 0.03). TIPS stent-to-caval distance and other parameters have no significant effect on primary patency, time to recurrence of symptoms, or all-cause mortality following TIPS with a stent-graft.

  12. Students' Perspective (Age Wise, Gender Wise and Year Wise) of Parameters Affecting the Undergraduate Engineering Education

    ERIC Educational Resources Information Center

    Kumari, Neeraj

    2014-01-01

    The objective of the study is to examine the students' perspective (age wise, gender wise and year wise) of parameters affecting the undergraduate engineering education system present in a private technical institution in NCR [National Capital Region], Haryana. It is a descriptive type of research in nature. The data has been collected with the…

  13. Wind speed vector restoration algorithm

    NASA Astrophysics Data System (ADS)

    Baranov, Nikolay; Petrov, Gleb; Shiriaev, Ilia

    2018-04-01

    Impulse wind lidar (IWL) signal processing software developed by JSC «BANS» recovers full wind speed vector by radial projections and provides wind parameters information up to 2 km distance. Increasing accuracy and speed of wind parameters calculation signal processing technics have been studied in this research. Measurements results of IWL and continuous scanning lidar were compared. Also, IWL data processing modeling results have been analyzed.

  14. Bayesian Analysis of Item Response Curves. Research Report 84-1. Mathematical Sciences Technical Report No. 132.

    ERIC Educational Resources Information Center

    Tsutakawa, Robert K.; Lin, Hsin Ying

    Item response curves for a set of binary responses are studied from a Bayesian viewpoint of estimating the item parameters. For the two-parameter logistic model with normally distributed ability, restricted bivariate beta priors are used to illustrate the computation of the posterior mode via the EM algorithm. The procedure is illustrated by data…

  15. Comprehensive assessment of the L-lysine production process from fermentation of sugarcane molasses.

    PubMed

    Anaya-Reza, Omar; Lopez-Arenas, Teresa

    2017-07-01

    L-Lysine is an essential amino acid that can be produced by chemical processes from fossil raw materials, as well as by microbial fermentation, the latter being a more efficient and environmentally friendly procedure. In this work, the production process of L-lysine-HCl is studied using a systematic approach based on modeling and simulation, which supports decision making in the early stage of process design. The study considers two analysis stages: first, the dynamic analysis of the fermentation reactor, where the conversion of sugars from sugarcane molasses to L-lysine with a strain of Corynebacterium glutamicum is carried out. In this stage, the operation mode (either batch or fed batch) and operating conditions of the fermentation reactor are defined to reach the maximum technical criteria. Afterwards, the second analysis stage relates to the industrial production process of L-lysine-HCl, where the fermentation reactor, upstream processing, and downstream processing are included. In this stage, the influence of key parameters on the overall process performance is scrutinized through the evaluation of several technical, economic, and environmental criteria, to determine a profitable and sustainable design of the L-lysine production process. The main results show how the operating conditions, process design, and selection of evaluation criteria can influence in the conceptual design. The best plant design shows maximum product yield (0.31 g L-lysine/g glucose) and productivity (1.99 g/L/h), achieving 26.5% return on investment (ROI) with a payback period (PBP) of 3.8 years, decreasing water and energy consumption, and with a low potential environmental impact (PEI) index.

  16. Distributed Generators Allocation in Radial Distribution Systems with Load Growth using Loss Sensitivity Approach

    NASA Astrophysics Data System (ADS)

    Kumar, Ashwani; Vijay Babu, P.; Murty, V. V. S. N.

    2017-06-01

    Rapidly increasing electricity demands and capacity shortage of transmission and distribution facilities are the main driving forces for the growth of distributed generation (DG) integration in power grids. One of the reasons for choosing a DG is its ability to support voltage in a distribution system. Selection of effective DG characteristics and DG parameters is a significant concern of distribution system planners to obtain maximum potential benefits from the DG unit. The objective of the paper is to reduce the power losses and improve the voltage profile of the radial distribution system with optimal allocation of the multiple DG in the system. The main contribution in this paper is (i) combined power loss sensitivity (CPLS) based method for multiple DG locations, (ii) determination of optimal sizes for multiple DG units at unity and lagging power factor, (iii) impact of DG installed at optimal, that is, combined load power factor on the system performance, (iv) impact of load growth on optimal DG planning, (v) Impact of DG integration in distribution systems on voltage stability index, (vi) Economic and technical Impact of DG integration in the distribution systems. The load growth factor has been considered in the study which is essential for planning and expansion of the existing systems. The technical and economic aspects are investigated in terms of improvement in voltage profile, reduction in total power losses, cost of energy loss, cost of power obtained from DG, cost of power intake from the substation, and savings in cost of energy loss. The results are obtained on IEEE 69-bus radial distribution systems and also compared with other existing methods.

  17. Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

    PubMed

    Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

    2015-09-01

    Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

  18. The Study of the Phase Characteristics of Bragg Cells for Acousto-Optic Signal Processing

    DTIC Science & Technology

    1998-01-01

    contractor will determine the relationship of phase characteristics between TeO2 and GaAs cells with their constructive and technical parameters. Design a...Braggcell TeO2 with minimal phase distortions operating near 100 MHz. Experimentally investigate the phase characteristics for a Bragg cell on TeO2 ...follows: The contractor will determine the relationship of phase characteristics between TeO2 and GaAs cells with their constructive and technical

  19. A Study of Relationships among Technical, Tactical, Physical Parameters and Final Outcomes in Elite Soccer Matches as Analyzed by a Semiautomatic Video Tracking System.

    PubMed

    Filetti, Cristoforo; Ruscello, Bruno; D'Ottavio, Stefano; Fanelli, Vito

    2017-06-01

    The performance of a soccer team depends on many factors such as decision-making, cognitive and physical skills, and dynamic ever-changing space-time interactions between teammate and opponents in relation to the ball. Seventy ( n = 70) matches of the Italian SERIE A season 2013-2014 were investigated to analyze the mean performance of 360 players in terms of physical (physical efficiency index; PEI) and technical-tactical (technical efficiency index; TEI) standpoints. Using a semiautomatic video analysis system that has incorporated new parameters able to measure technical-tactical and physical efficiency (Patent IB2010/002593, 2011-ISA), the correlation between these new variables and how much it relates to the likelihood of winning were verified. Correlations between TEI and PEI were significant ( n = 140, r = .60, p < .001), and TEI showed a higher likelihood of winning than PEI factors ( p < .0001 vs. .0001, CI 95% [1.64, 3.00] vs. [1.28, 2.07]). Higher TEI and TEI + PEI differences between the teams were associated with a greater likelihood of winning, but PEI differences were not. Key performance indicators and this performance assessment method might be useful to better understand what determines winning and to assist the overall training process and match management.

  20. Protein Denaturation on p-T Axes--Thermodynamics and Analysis.

    PubMed

    Smeller, László

    2015-01-01

    Proteins are essential players in the vast majority of molecular level life processes. Since their structure is in most cases substantial for their correct function, study of their structural changes attracted great interest in the past decades. The three dimensional structure of proteins is influenced by several factors including temperature, pH, presence of chaotropic and cosmotropic agents, or presence of denaturants. Although pressure is an equally important thermodynamic parameter as temperature, pressure studies are considerably less frequent in the literature, probably due to the technical difficulties associated to the pressure studies. Although the first steps in the high-pressure protein study have been done 100 years ago with Bridgman's ground breaking work, the field was silent until the modern spectroscopic techniques allowed the characterization of the protein structural changes, while the protein was under pressure. Recently a number of proteins were studied under pressure, and complete pressure-temperature phase diagrams were determined for several of them. This review summarizes the thermodynamic background of the typical elliptic p-T phase diagram, its limitations and the possible reasons for deviations of the experimental diagrams from the theoretical one. Finally we show some examples of experimentally determined pressure-temperature phase diagrams.

  1. Examination of a size-change test for photovoltaic encapsulation materials

    NASA Astrophysics Data System (ADS)

    Miller, David C.; Gu, Xiaohong; Ji, Liang; Kelly, George; Nickel, Nichole; Norum, Paul; Shioda, Tsuyoshi; Tamizhmani, Govindasamy; Wohlgemuth, John H.

    2012-10-01

    We examine a proposed test standard that can be used to evaluate the maximum representative change in linear dimensions of sheet encapsulation products for photovoltaic modules (resulting from their thermal processing). The proposed protocol is part of a series of material-level tests being developed within Working Group 2 of the Technical Committee 82 of the International Electrotechnical Commission. The characterization tests are being developed to aid module design (by identifying the essential characteristics that should be communicated on a datasheet), quality control (via internal material acceptance and process control), and failure analysis. Discovery and interlaboratory experiments were used to select particular parameters for the size-change test. The choice of a sand substrate and aluminum carrier is explored relative to other options. The temperature uniformity of +/-5°C for the substrate was confirmed using thermography. Considerations related to the heating device (hot-plate or oven) are explored. The time duration of 5 minutes was identified from the time-series photographic characterization of material specimens (EVA, ionomer, PVB, TPO, and TPU). The test procedure was revised to account for observed effects of size and edges. The interlaboratory study identified typical size-change characteristics, and also verified the absolute reproducibility of +/-5% between laboratories.

  2. Reconnaissance profiles with WLP in complex geological regions

    NASA Astrophysics Data System (ADS)

    Michon, Dominique

    1993-04-01

    3-D has now become an essential technique for subsurface imaging. Until recently, it was predominantly employed for reservoir description, but is now starting to be used for exploration. However, in crustal seismic, it would seem that such a tool is still far from being cost-effective. WLP, or Wide Line Profiling, developed by CGG in 1973, is an attractive alternative which we shall examine. First, we shall examine why 3-D is so difficult to apply, for both financial and technical reasons. Next, we shall study the principle of WLP, and emphasize the fundamental differences between WLP and 3-D. We shall then study the resulting data processing and parameters. Using a set of examples, we shall also examine the special characteristics of the method and the advantages that it can offer: (1) 3-D analysis of reflections on a 2-D section. (2) Avoiding interference between reflections. (3) Highlighting faults or folds. (4) For continuous horizons, positioning reflection points. (5) Possibility of mapping in depth, whether in migrated time or not, the swaths explored by the seismic line. (6) Improving the quality of the standard time section by noise reduction.

  3. A Co-modeling Method Based on Component Features for Mechatronic Devices in Aero-engines

    NASA Astrophysics Data System (ADS)

    Wang, Bin; Zhao, Haocen; Ye, Zhifeng

    2017-08-01

    Data-fused and user-friendly design of aero-engine accessories is required because of their structural complexity and stringent reliability. This paper gives an overview of a typical aero-engine control system and the development process of key mechatronic devices used. Several essential aspects of modeling and simulation in the process are investigated. Considering the limitations of a single theoretic model, feature-based co-modeling methodology is suggested to satisfy the design requirements and compensate for diversity of component sub-models for these devices. As an example, a stepper motor controlled Fuel Metering Unit (FMU) is modeled in view of the component physical features using two different software tools. An interface is suggested to integrate the single discipline models into the synthesized one. Performance simulation of this device using the co-model and parameter optimization for its key components are discussed. Comparison between delivery testing and the simulation shows that the co-model for the FMU has a high accuracy and the absolute superiority over a single model. Together with its compatible interface with the engine mathematical model, the feature-based co-modeling methodology is proven to be an effective technical measure in the development process of the device.

  4. The Analysis of the System of special water purification of Beloyarskaya Nuclear Power Plant unit BN-800

    NASA Astrophysics Data System (ADS)

    Valtseva, A. I.; Bibik, I. S.

    2017-11-01

    This article discusses how the latest system of special water purification KPF-30, designed specifically for the fourth power unit of Beloyarskaya nuclear power plant, which has a number of advantages over other water purification systems as chemical-physical and technical-economic, environmental, and other industrial indicators. The scheme covered in this article systems of special water purification involves the use of a hydrocyclone at the preliminary stage of water treatment, as a worthy alternative to ion-exchange filters, which can significantly reduce the volume of toxic waste. The world community implements the project of closing the nuclear fuel cycle, there is a need to improve the reliability of the equipment for safe processes and development of critical and supercritical parameters in the nuclear industry. Essentially, on operated NPP units, the only factor that can cost-effectively optimize to improve the reliability of equipment is the water chemistry. System KPF30 meets the principles and criteria of ecological safety, demonstrating the justification for reagent less method of water treatment on the main stages, in which no formation of toxic wastes, leading to irreversible consequences of environmental pollution and helps to conserve water.

  5. HDTV and large-screen display

    NASA Astrophysics Data System (ADS)

    Mitsuhashi, Tetsuo

    1990-08-01

    HDTV (known as Hi-Vision in Japan), with its ability to provide through high- definition pictures on a large screen display advanced psychological effects such as sensations of reality and a visual impact unobtainable in conventional television, is the television system of the next generation. In Japan, daily one-hour experimental broadcasting was initiated in June 1989 using the BS-2 broadcast satellite, and regular service is scheduled to begin via the BS-3 satellite to be launched in 1990. To this end, a home-use receiver using VLSIs has already been developed. Moreover, HDTV is currently being applied in such diverse areas as film production, printing and publishing, medicine, and art museums. The HDTV system handles approximately five times the information of conventional television. As a result, a large screen display capable of maintaining stable resolution greater than twice that of conventional displays is essential to the full realization of HDTV's vast potential. This paper will first discuss HDTV's basic parameters, concentrating on the psychovisual effects, and explain some preferable display characteristics from this psychovisual point of view. It will then discuss the technical problems in developing such a display, and final ly describe the current state of HDTV display development.

  6. A conceptual framework for economic optimization of single hazard surveillance in livestock production chains.

    PubMed

    Guo, Xuezhen; Claassen, G D H; Oude Lansink, A G J M; Saatkamp, H W

    2014-06-01

    Economic analysis of hazard surveillance in livestock production chains is essential for surveillance organizations (such as food safety authorities) when making scientifically based decisions on optimization of resource allocation. To enable this, quantitative decision support tools are required at two levels of analysis: (1) single-hazard surveillance system and (2) surveillance portfolio. This paper addresses the first level by presenting a conceptual approach for the economic analysis of single-hazard surveillance systems. The concept includes objective and subjective aspects of single-hazard surveillance system analysis: (1) a simulation part to derive an efficient set of surveillance setups based on the technical surveillance performance parameters (TSPPs) and the corresponding surveillance costs, i.e., objective analysis, and (2) a multi-criteria decision making model to evaluate the impacts of the hazard surveillance, i.e., subjective analysis. The conceptual approach was checked for (1) conceptual validity and (2) data validity. Issues regarding the practical use of the approach, particularly the data requirement, were discussed. We concluded that the conceptual approach is scientifically credible for economic analysis of single-hazard surveillance systems and that the practicability of the approach depends on data availability. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. The ISACA Business Model for Information Security: An Integrative and Innovative Approach

    NASA Astrophysics Data System (ADS)

    von Roessing, Rolf

    In recent years, information security management has matured into a professional discipline that covers both technical and managerial aspects in an organisational environment. Information security is increasingly dependent on business-driven parameters and interfaces to a variety of organisational units and departments. In contrast, common security models and frameworks have remained largely technical. A review of extant models ranging from [LaBe73] to more recent models shows that technical aspects are covered in great detail, while the managerial aspects of security are often neglected.Likewise, the business view on organisational security is frequently at odds with the demands of information security personnel or information technology management. In practice, senior and executive level management remain comparatively distant from technical requirements. As a result, information security is generally regarded as a cost factor rather than a benefit to the organisation.

  8. Safety aspects of lipidapheresis using DALI and MONET - Multicenter observational study.

    PubMed

    Kozik-Jaromin, Justyna; Röseler, Eberhard; Heigl, Franz; Spitthöver, Ralf; Ringel, Jens; Schmitz, Gerd; Heinzler, Rainer; Abdul-Rahman, Nadim; Leistikow, Frank; Himmelsbach, Frido; Schettler, Volker; Uhlenbusch-Körwer, Ingrid; Ramlow, Wolfgang

    2017-11-01

    Lipidapheresis was introduced for intractable hyperlipidemia as a more selective therapy than plasma exchange aiming to enhance efficacy and limit side-effects. Although this therapy is regarded safe, multicenter data from routine application are limited. We investigated direct adsorption of lipoproteins (DALI) and lipofiltration (MONET) regarding the short and the long-term safety aspects. This multicenter observational study prospectively evaluated 2154 DALI and 1297 MONET sessions of 122 patients during a period of 2 years. Safety parameters included clinical side-effects (adverse device effects, ADEs), technical complications, blood pressure and pulse rate. Also routinely performed laboratory parameters were documented. Analysis of laboratory parameters was not corrected for blood dilution. Overall 0.4% DALI and 0.5% MONET treatments were affected by ADE. Technical complications occurred in 2.1% and in 0.8% DALI and MONET sessions, respectively. The most frequent ADE was hypotension, and the majority of technical problems were related to vascular access. Both types of treatments led to a drop of thrombocytes in the range of 7-8%. Hematocrit and erythrocytes decreased only during the DALI treatments by about 6%. Leucocytes decreased during the DALI therapy (∼15%), whereas they increased during the MONET application (∼11%). MONET treatment was associated with a higher reduction of proteins (fibrinogen: 58% vs. 23%, albumin: 12% vs. 7%, CRP: 33% vs. 19% for MONET and DALI, respectively). Apart from severe thrombocytopenia in two DALI patients, changes of other parameters were typically transient. Under routine use the frequency of side-effects was low. Still, monitoring of blood count and proteins in chronic apheresis patients is recommended. Copyright © 2017. Published by Elsevier B.V.

  9. Sphere-enhanced microwave ablation (sMWA) versus bland microwave ablation (bMWA): technical parameters, specific CT 3D rendering and histopathology.

    PubMed

    Gockner, T L; Zelzer, S; Mokry, T; Gnutzmann, D; Bellemann, N; Mogler, C; Beierfuß, A; Köllensperger, E; Germann, G; Radeleff, B A; Stampfl, U; Kauczor, H U; Pereira, P L; Sommer, C M

    2015-04-01

    This study was designed to compare technical parameters during ablation as well as CT 3D rendering and histopathology of the ablation zone between sphere-enhanced microwave ablation (sMWA) and bland microwave ablation (bMWA). In six sheep-livers, 18 microwave ablations were performed with identical system presets (power output: 80 W, ablation time: 120 s). In three sheep, transarterial embolisation (TAE) was performed immediately before microwave ablation using spheres (diameter: 40 ± 10 μm) (sMWA). In the other three sheep, microwave ablation was performed without spheres embolisation (bMWA). Contrast-enhanced CT, sacrifice, and liver harvest followed immediately after microwave ablation. Study goals included technical parameters during ablation (resulting power output, ablation time), geometry of the ablation zone applying specific CT 3D rendering with a software prototype (short axis of the ablation zone, volume of the largest aligned ablation sphere within the ablation zone), and histopathology (hematoxylin-eosin, Masson Goldner and TUNEL). Resulting power output/ablation times were 78.7 ± 1.0 W/120 ± 0.0 s for bMWA and 78.4 ± 1.0 W/120 ± 0.0 s for sMWA (n.s., respectively). Short axis/volume were 23.7 ± 3.7 mm/7.0 ± 2.4 cm(3) for bMWA and 29.1 ± 3.4 mm/11.5 ± 3.9 cm(3) for sMWA (P < 0.01, respectively). Histopathology confirmed the signs of coagulation necrosis as well as early and irreversible cell death for bMWA and sMWA. For sMWA, spheres were detected within, at the rim, and outside of the ablation zone without conspicuous features. Specific CT 3D rendering identifies a larger ablation zone for sMWA compared with bMWA. The histopathological signs and the detectable amount of cell death are comparable for both groups. When comparing sMWA with bMWA, TAE has no effect on the technical parameters during ablation.

  10. Water-oil separation performance of technical textiles used for marine pollution disasters.

    PubMed

    Seddighi, Mahdi; Hejazi, Sayyed Mahdi

    2015-07-15

    Oil is principally one of the most important energy sources in the world. However, as long as oil is explored and transported for being used, there will be the risk of the spillage into the marine environment. The use of technical textiles, i.e. fibrous beds, is a conventional separation technique for oil/water emulsion since it is efficient and easy to design. In this paper, the recovery of oil by technical textiles was mathematically modeled based on the structural parameters of textile and the capillary mechanism. Eleven types of commercial technical textiles with different properties were prepared for the experimental program. The experimental design included fiber type (polypropylene and polyester), fabric type (woven and/or nonwoven), fabric thickness and fabric areal density. Consequently, the absorption capacities of different technical textile samples were derived by the use of theoretical and experimental methods. The results show that there is a well fitness between theoretical outputs and experimental data. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. A summary report on the search for current technologies and developers to develop depth profiling/physical parameter end effectors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nguyen, Q.H.

    1994-09-12

    This report documents the search strategies and results for available technologies and developers to develop tank waste depth profiling/physical parameter sensors. Sources searched include worldwide research reports, technical papers, journals, private industries, and work at Westinghouse Hanford Company (WHC) at Richland site. Tank waste physical parameters of interest are: abrasiveness, compressive strength, corrosiveness, density, pH, particle size/shape, porosity, radiation, settling velocity, shear strength, shear wave velocity, tensile strength, temperature, viscosity, and viscoelasticity. A list of related articles or sources for each physical parameters is provided.

  12. Establishment of a Comprehensive Data System for Occupational Training in Kentucky--Phase I, Final Report.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    This document reports on the first of a 3-phase plan to adapt and install a state vocational-technical education comprehensive data system for occupational training in Kentucky. The objective of the system described is to provide more comprehensive analysis of data essential to education decision-makers. Primary users of the system are expected to…

  13. Improving Student Achievement in Science... The NSRC Blueprint: Science Education Reform for School Districts and States...

    ERIC Educational Resources Information Center

    National Science Resources Center, 2006

    2006-01-01

    Systemic reform requires leaders with technical knowledge of the five essential components of science education reform, as well as access to products and services that can be used to move leaders through the various stages of reform. During the past two decades, the National Science Resources Center (NSRC) has developed differentiated products and…

  14. The Perception and Estimation of Egocentric Distance in Real and Augmented Reality Environments

    DTIC Science & Technology

    2008-05-01

    MICHELLE SAMS, PhD. Research Program Manager Director Training and Leader Development Technical review by Jennifer L. Solberg, U.S. Army Research...with augmented reality technology that are essential for determining the usefulness of current augmented reality (AR) for training and performance...determine perceived distance. 15. SUBJECT TERMS Augmented Environments, Augmented Reality, Dismounted Infantry, Training , Presence, distance perception

  15. A Sisyphean Task: Historical Perspectives on the Relationship between Writing and Reading Instruction. Technical Report No. 7.

    ERIC Educational Resources Information Center

    Clifford, Geraldine Joncich

    Based on the thesis that cycles of concern for an integrated, holistic approach to English language instruction have periodically emerged in reaction to historical forces that are essentially fragmenting in their effects, this thematic report explores events in 20th-century American educational theory, research, and practice that deal with English…

  16. Fire Safety's My Job. Eighth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

    ERIC Educational Resources Information Center

    Texas State Commission on Fire Protection, Austin.

    This booklet comprises the eighth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of eighth grade students, its objectives include: (1) focusing on technical aspects of fire hazards and detection, and (2) exploring fire hazards outside the home. Texas essential elements of…

  17. Teaching Talented Teenagers at the Interlochen Arts Academy: An Interview with Three Master Teachers: Crispin Campbell, Hal Grossman, and T. J. Lymenstull.

    ERIC Educational Resources Information Center

    Haroutounian, Joanne

    2000-01-01

    This interview with three performing master teachers at the Interlochen Arts Academy features personal teaching approaches that develop the problem solving skills that are essential for advanced musical study. A positive master teacher-student dynamic is revealed that nurtures technical facility, as well as interpretive decision-making. The role…

  18. "Yes, Your Honor!": A Corpus-Based Study of Technical Vocabulary in Discipline-Related Movies and TV Shows

    ERIC Educational Resources Information Center

    Csomay, Eniko; Petrovic, Marija

    2012-01-01

    Vocabulary is an essential element of every second/foreign language teaching and learning program. While the goal of language teaching programs is to focus on explicit vocabulary teaching to promote learning, "materials which provide visual and aural input such as movies may be conducive to incidental vocabulary learning." (Webb and Rodgers, 2009,…

  19. The Incorporation of Market Orientation in the School Culture: An Essential Aspect of School Marketing

    ERIC Educational Resources Information Center

    Oplatka, Izhar; Hemsley-Brown, Jane

    2007-01-01

    Purpose: The purpose of this paper is to present the major features of market orientation (MO) and its benefits for schools, suggests an inventory to measure the degree of MO in a school, and provides strategies to incorporate elements of MO into the school culture. Design/methodology/approach: An instructional, technical approach which is based…

  20. Development of a Curriculum to Meet Changing Manpower Needs of the Computer and Business Machine Industries; Interim Developments. Final Report.

    ERIC Educational Resources Information Center

    Lescarbeau, Roland F.; And Others

    This suggested curriculum guide represents the consensus of opinion by the representatives of seven schools comprising the Technical Education Consortium, with advice of industrial experts concerning the essential educational needs of the technicians they would employ. It will serve as a guide to schools planning to institute a program applicable…

  1. Utilization of Skills in the Care of the Parent Child System (NS 139): Competency-Based Course Syllabus.

    ERIC Educational Resources Information Center

    Brady, Marilyn H.; Hutsell, Deborah C.

    "Utilization of Skills in the Care of the Parent Child System" (NS 139) is an associate degree nursing course offered at Chattanooga State Technical Community College to provide essential theory and experience in caring for the parent-child system throughout various stages of development. The course syllabus for NS 139 begins with information on…

  2. Technical and Economical Demands on 25K - 77K Refrigerators for Future HTS — Series Products in Power Engineering

    NASA Astrophysics Data System (ADS)

    Gromoll, B.

    2004-06-01

    For the future high temperature superconductivity, HTS, series products new refrigerators are essential. Demands are made on these which are only partly fulfilled by refrigerators available in the market today. This refers to cooling power, initial cost and in particular reliability. Without proper refrigeration techniques it will be almost impossible to bring HTS products to the market. Based on the experiences made by the construction and operation of HTS prototypes within our company, like the 400 kW motor, 1.2 MVA current limiter and 1 MVA traction-transformer provided with refrigerators which are available in the market today, criteria have been established to identify the future technical and economical requirements. These criteria apply to efficiency, maintainability, operation flexibility, feasibility of integration and performance/cost ratio. For the temperature range of 20 K to 77 K cooling with Gifford-McMahon, Pulse Tube, Stirling and Mixture-Cascade refrigerators are applicable. The development potential of these processes are compared for the different applications in future series products. Presented are the necessary steps towards reliable and economic refrigerators from the viewpoint of an equipment manufacturer. These are essential for a market entry in the year 2008.

  3. Multi-objective optimization of GENIE Earth system models.

    PubMed

    Price, Andrew R; Myerscough, Richard J; Voutchkov, Ivan I; Marsh, Robert; Cox, Simon J

    2009-07-13

    The tuning of parameters in climate models is essential to provide reliable long-term forecasts of Earth system behaviour. We apply a multi-objective optimization algorithm to the problem of parameter estimation in climate models. This optimization process involves the iterative evaluation of response surface models (RSMs), followed by the execution of multiple Earth system simulations. These computations require an infrastructure that provides high-performance computing for building and searching the RSMs and high-throughput computing for the concurrent evaluation of a large number of models. Grid computing technology is therefore essential to make this algorithm practical for members of the GENIE project.

  4. Task toward a Realization of Commercial Tokamak Fusion Plants in 2050 -The Role of ITER and the Succeeding Developments- 4.Technology and Material Research in Fusion Power Plant Development

    NASA Astrophysics Data System (ADS)

    Akiba, Masato; Matsui, Hideki; Takatsu, Hideyuki; Konishi, Satoshi

    Technical issues regarding the fusion power plant that are required to be developed in the period of ITER construction and operation, both with ITER and with other facilities that complement ITER are described in this section. Three major fields are considered to be important in fusion technology. Section 4.1 summarizes blanket study, and ITER Test Blanket Module (TBM) development that focuses its effort on the first generation power blanket to be installed in DEMO. ITER will be equipped with 6 TBMs which are developed under each party's fusion program. In Japan, the solid breeder using water as a coolant is the primary candidate, and He-cooled pebble bed is the alternative. Other liquid options such as LiPb, Li or molten salt are developed by other parties' initiatives. The Test Blanket Working Group (TBWG) is coordinating these efforts. Japanese universities are investigating advanced concepts and fundamental crosscutting technologies. Section 4.2 introduces material development and particularly, the international irradiation facility, IFMIF. Reduced activation ferritic/martensitic steels are identified as promising candidates for the structural material of the first generation fusion blanket, while and vanadium alloy and SiC/SiC composite are pursued as advanced options. The IFMIF is currently planning the next phase of joint activity, EVEDA (Engineering Validation and Engineering Design Activity) that encompasses construction. Material studies together with the ITER TBM will provide essential technical information for development of the fusion power plant. Other technical issues to be addressed regarding the first generation fusion power plant are summarized in section 4.3. Development of components for ITER made remarkable progress for the major essential technology also necessary for future fusion plants, however many still need further improvements toward power plant. Such areas includes; the divertor, plasma heating/current drive, magnets, tritium, and remote handling. There remain many other technical issues for power plant which require integrated efforts.

  5. Increasing the technical level of mining haul trucks

    NASA Astrophysics Data System (ADS)

    Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

    2017-11-01

    Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

  6. Improving Space Project Cost Estimating with Engineering Management Variables

    NASA Technical Reports Server (NTRS)

    Hamaker, Joseph W.; Roth, Axel (Technical Monitor)

    2001-01-01

    Current space project cost models attempt to predict space flight project cost via regression equations, which relate the cost of projects to technical performance metrics (e.g. weight, thrust, power, pointing accuracy, etc.). This paper examines the introduction of engineering management parameters to the set of explanatory variables. A number of specific engineering management variables are considered and exploratory regression analysis is performed to determine if there is statistical evidence for cost effects apart from technical aspects of the projects. It is concluded that there are other non-technical effects at work and that further research is warranted to determine if it can be shown that these cost effects are definitely related to engineering management.

  7. Environmental effects of dredging. Documentation of the dyecon module for ADDAMS: Determining the hydraulic retention and efficiency of confined disposal facilities. Technical note

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hayes, D.F.; Schroeder, P.R.; Engler, R.M.

    This technical note describes procedures for determining mean hydraulic retention time and efficiency of a confined disposal facility (CDF) from a dye tracer slug test. These parameters are required to properly design a CDF for solids retention and for effluent quality considerations. Detailed information on conduct and analysis of dye tracer studies can be found in Engineer Manual 1110-2-5027, Confined Dredged Material Disposal. This technical note documents the DYECON computer program which facilitates the analysis of dye tracer concentration data and computes the hydraulic efficiency of a CDF as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  8. Cultural Preservation Program for Alaska

    ERIC Educational Resources Information Center

    Barbaran, Francisco Ramon

    2011-01-01

    In this technical report, an innovative cultural preservation program for implementation in Athabascan villages is presented. The parameters for success in implementing such a project is discussed based on a workshop with Athabascan elders.

  9. 32 CFR Appendix C to Part 651 - Mitigation and Monitoring

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., COE research laboratories, COE districts and divisions, and DoD Regional Support Centers. State... technical parameters used must be measurable; for example, the monitoring program must be quantitative and...

  10. 32 CFR Appendix C to Part 651 - Mitigation and Monitoring

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., COE research laboratories, COE districts and divisions, and DoD Regional Support Centers. State... technical parameters used must be measurable; for example, the monitoring program must be quantitative and...

  11. 32 CFR Appendix C to Part 651 - Mitigation and Monitoring

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., COE research laboratories, COE districts and divisions, and DoD Regional Support Centers. State... technical parameters used must be measurable; for example, the monitoring program must be quantitative and...

  12. 32 CFR Appendix C to Part 651 - Mitigation and Monitoring

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., COE research laboratories, COE districts and divisions, and DoD Regional Support Centers. State... technical parameters used must be measurable; for example, the monitoring program must be quantitative and...

  13. 32 CFR Appendix C to Part 651 - Mitigation and Monitoring

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., COE research laboratories, COE districts and divisions, and DoD Regional Support Centers. State... technical parameters used must be measurable; for example, the monitoring program must be quantitative and...

  14. Verification of the technical parameters of head-only electrical stunning of pigs under commercial conditions.

    PubMed

    Végh, Akos; Abonyi-Tóth, Zsolt; Rafai, Pál

    2010-06-01

    The European Food Safety Authority recommends a minimum current of 1.3 Amps for the electrical head-only stunning of pigs. However, it is stated as well that 'the technical reference data for head-only electrical stunning of pigs such as 1.3 Amps are either rather old or worked out under experimental laboratory conditions'. This study was carried out to verify the electrical parameters of pig stunning under commercial conditions. Altogether 145 fattener pigs (body weight range: 30-150 kg, median 109 kg) were tested at four different private slaughterhouses in Hungary where head-only electrical stunners were used with different constant voltage settings. In each case the following data were recorded: individual liveweight (kg), current (A) and voltage (V) (measured with an individually developed analogue device placed in the circuit), current duration (s), effectiveness of stunning, grading of carcass. Correlations between these parameters and effectiveness were examined. Besides that, any correlation between the test parameters and impedance of head was examined. In 128 out of the 145 cases the stunning was effective (88.3%). Effectiveness was significantly related to current but not to other parameters such as voltage and duration of load. Impedance of head was not correlated with the size of the animal and the meat grading scores. Generally, it was concluded that the use of a single electrical parameter (e.g. a minimum current of 1.3 A) as a prerequisite of good stunning is not ideal.

  15. Aroma-therapeutic effects of massage blended essential oils on humans.

    PubMed

    Hongratanaworakit, Tapanee

    2011-08-01

    Although blended essential oils are increasingly being used for the improvement of the quality of life and for the relief of various symptoms in patients, the scientific evaluation of the aroma-therapeutic effects of blended essential oils in humans is rather scarce. In this study, we hypothesized that applying blended essential oil would provide a synergistic effect that would have a chance for success in treating depression or anxiety. Therefore, the main objective of this study was to investigate the effects of the blended essential oil on autonomic parameters and on emotional responses in humans following transdermal absorption. The blended essential oil consisted of lavender and bergamot oils. Human autonomic parameters, i.e. blood pressure, pulse rate, breathing rate, and skin temperature, were recorded as indicators of the arousal level of the autonomic nervous system. In addition, subjects had to rate their emotional condition in terms of relaxation, vigor, calmness, attentiveness, mood, and alertness in order to assess subjective behavioral arousal. Forty healthy volunteers participated in the experiments. Blended essential oil was applied topically to the skin of the abdomen of each subject. Compared with placebo, blended essential oil caused significant decreases of pulse rate, and systolic and diastolic blood pressure, which indicated a decrease of autonomic arousal. At the emotional level, subjects in the blended essential oil group rated themselves as 'more calm' and 'more relaxed' than subjects in the control group. This finding suggests a decrease of subjective behavioral arousal. In conclusion, our investigation demonstrates the relaxing effect of a mixture of lavender and bergamot oils. This synergistic blend provides evidence for its use in medicine for treating depression or anxiety in humans.

  16. Relationship Between Soil and Essential Oil Profiles in Salvia desoleana Populations: Preliminary Results.

    PubMed

    Rapposelli, Emma; Melito, Sara; Barmina, Giovanni Gabriele; Foddai, Marzia; Azara, Emanuela; Scarpa, Grazia Maria

    2015-09-01

    Salvia desoleana is a herbaceous perennial shrub endemic of Sardinia (Italy). The leaves are a source of essential oil, used in pharmaceutical and cosmetic industries. The therapeutic function of this species has been associated to the presence of essential oils rich in α/β-pinene, p-cimene, linalool, linalyl acetate and 1,8-cineole. Today.the industrial request of Salvia essential oils is increasing and most of the biomass is exploited from the natural populations which are under severe risk of genetic erosion. In order to improve the essential oil production, the study of the environmental parameters that influence composition, quality and quantity of the essential oils, turns out to be necessary. Soil physical and chemical structure represents one of the determinant factors in secondary metabolites production, and could also be involved in volatiles fraction composition in the same species. The main aim of this research was to explore the relationship between essential oil profiles and soil characteristics in S. desoleana populations. GC/MS analysis performed on the essential oil extracts identified 22 principal compounds, which were extremely variable among the five S. desoleana populations studied. The analysis of the essential oils revealed different compositions in the terpenes fractions: 68.2% of monoterpenes, 27.3% of sesquiterpenes and 4.5% of diterpenes. Analysis of chemical and physical soil parameters at the collection sites revealed that silt and sand contents were correlated with α-pinene and sclareol fractions and the total K20 was significantly correlated to several compounds belonging to the three terpene fractions identified. These results will provide guidelines for the in site conservation and for the improvement of the commercial value of the species.

  17. Structure-activity modelling of essential oils, their components, and key molecular parameters and descriptors.

    PubMed

    Owen, Lucy; Laird, Katie; Wilson, Philippe B

    2018-04-01

    Many essential oil components are known to possess broad spectrum antimicrobial activity, including against antibiotic resistant bacteria. These compounds may be a useful source of new and novel antimicrobials. However, there is limited research on the structure-activity relationship (SAR) of essential oil compounds, which is important for target identification and lead optimization. This study aimed to elucidate SARs of essential oil components from experimental and literature sources. Minimum Inhibitory Concentrations (MICs) of essential oil components were determined against Escherichia coli and Staphylococcus aureus using a microdilution method and then compared to those in published in literature. Of 12 essential oil components tested, carvacrol and cuminaldehyde were most potent with MICs of 1.98 and 2.10 mM, respectively. The activity of 21 compounds obtained from the literature, MICs ranged from 0.004 mM for limonene to 36.18 mM for α-terpineol. A 3D qualitative SAR model was generated from MICs using FORGE software by consideration of electrostatic and steric parameters. An r 2 value of 0.807 for training and cross-validation sets was achieved with the model developed. Ligand efficiency was found to correlate well to the observed activity (r 2  = 0.792), while strongly negative electrostatic regions were present in potent molecules. These descriptors may be useful for target identification of essential oils or their major components in antimicrobial/drug development. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Parameter identification for nonlinear aerodynamic systems

    NASA Technical Reports Server (NTRS)

    Pearson, Allan E.

    1993-01-01

    This final technical report covers a three and one-half year period preceding February 28, 1993 during which support was provided under NASA Grant NAG-1-1065. Following a general description of the system identification problem and a brief survey of methods to attack it, the basic ideas behind the approach taken in this research effort are presented. The results obtained are described with reference to the published work, including the five semiannual progress reports previously submitted and two interim technical reports.

  19. Application for certification 1988 model year light-duty vehicles - US Technical Research Company (Peugeot)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings that describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems.

  20. Combined braking system for hybrid vehicle

    NASA Astrophysics Data System (ADS)

    Kulekina, A. V.; Bakholdin, P. A.; Shchurov, N. I.

    2017-10-01

    The paper presents an analysis of surface vehicle’s existing braking systems. The technical solution and brake-system design were developed for use of regenerative braking energy. A technical parameters comparison of energy storage devices of various types was made. Based on the comparative analysis, it was decided to use supercapacitor because of its applicability for an electric drive intermittent operation. The calculation methods of retarder key components were proposed. Therefrom, it was made a conclusion that rebuild gasoline-electric vehicles are more efficient than gasoline ones.

  1. Parameter Impact on Sharing Studies Between UAS CNPC Satellite Transmitters and Terrestrial Systems

    NASA Technical Reports Server (NTRS)

    Kerczewski, Robert J.; Wilson, Jeffrey D.; Bishop, William D.

    2015-01-01

    In order to provide a control and non-payload communication (CNPC) link for civil-use unmanned aircraft systems (UAS) when operating in beyond-line-of-sight (BLOS) conditions, satellite communication links are generally required. The International Civil Aviation Organization (ICAO) has determined that the CNPC link must operate over protected aviation safety spectrum allocations. Although a suitable allocation exists in the 5030-5091 MHz band, no satellites provide operations in this band and none are currently planned. In order to avoid a very lengthy delay in the deployment of UAS in BLOS conditions, it has been proposed to use existing satellites operating in the Fixed Satellite Service (FSS), of which many operate in several spectrum bands. Regulatory actions by the International Telecommunications Union (ITU) are needed to enable such a use on an international basis, and indeed Agenda Item (AI) 1.5 for the 2015 World Radiocommunication Conference (WRC) was established to decide on the enactment of possible regulatory provisions. As part of the preparation for AI 1.5, studies on the sharing FSS bands between existing services and CNPC for UAS are being contributed by NASA and others. These studies evaluate the potential impact of satellite CNPC transmitters operating from UAS on other in-band services, and on the potential impact of other in-band services on satellite CNPC receivers operating on UAS platforms. Such studies are made more complex by the inclusion of what are essentially moving FSS earth stations, compared to typical sharing studies between fixed elements. Hence, the process of determining the appropriate technical parameters for the studies meets with difficulty. In order to enable a sharing study to be completed in a less-than-infinite amount of time, the number of parameters exercised must be greatly limited. Therefore, understanding the impact of various parameter choices is accomplished through selectivity analyses. In the case of sharing studies for AI 1.5, identification of worst-case parameters allows the studies to be focused on worst-case scenarios with assurance that other parameter combinations will yield comparatively better results and therefore do not need to be fully analyzed. In this paper, the results of such sensitivity analyses are presented for the case of sharing between UAS CNPC satellite transmitters and terrestrial receivers using the Fixed Service (FS) operating in the same bands, and the implications of these analyses on sharing study results.

  2. Essential oils for dairy calves: effects on performance, scours, rumen fermentation and intestinal fauna.

    PubMed

    Santos, F H R; De Paula, M R; Lezier, D; Silva, J T; Santos, G; Bittar, C M M

    2015-06-01

    The first cause of death of dairy calves is often diarrhea which is mainly caused by pathogenic bacteria, which can result in excessive use of antibiotics. However, facing the increase concern by the industry and consumers, the use of antibiotics not only to control pathogens, but also to manipulate growth, has become a challenge. Alternative additives, such essential oils, have the potential to decrease antibiotic use, without reducing performance or increasing mortality of dairy calves. The objective of this study was to evaluate the use of a commercial blend of essential oils, incorporated into the calf starter and/or milk replacer to monitor the effect on overall calf performance, fecal scores and rumen fermentation parameters. A total of 30 Holstein calves received 6 l/day of a liquid diet, consisting of a commercial milk replacer containing 20% CP : 15% fat (EE). Calves had free choice access to water and calf starter. Weaning occurred at week 8, and calves were followed until the 10th week of age. Calves were assigned to one of the three treatment groups in a randomized block design. (1) control without essential oils supplementation (C); (2) essential oils blend in the milk replacer at 400 mg/kg (MR) and (3) essential oils blend in the milk replacer (200 mg/kg) and starter feed (200 mg/kg) (MRS). From the 2nd week, calves were weighed and body measurements were taken, while concentrate intake and fecal scores were monitored daily. Blood samples were drawn weekly for determination of glucose and β-hydroxybutyrate. Fecal samples were collected weekly and analyzed for lactic acid bacteria and Enterobacteria; and ruminal fluid for determination of pH, short chain fatty acids, ammonia-N and counts of amylolytic and cellulolytic bacteria, and protozoa. Performance, fecal scores and intestines microorganisms were not affected by the essential oils supplementation. Ruminal and blood parameters were also not affected, with the exception the rumen ammonia-N concentration, with higher values when essential oils were supplemented in a combination of milk replacer and starter feed. Most of the evaluated parameters were affected by age of calves, mainly as a response to the increase in concentrate intake as animals' aged. Essential oils are promising substitutes for antibiotics. However, the dose and routes of administration deserve further studies, allowing a better animal performance and health to be achieved.

  3. Pathfinder Technologies Specialist, X-37

    NASA Technical Reports Server (NTRS)

    French, James R.

    2001-01-01

    The X-37 is a technology demonstrator sponsored by NASA. It includes a number of experiments both imbedded (i.e., essential aspects of the vehicle) and separate. The technologies demonstrated will be useful in future operational versions as well as having broad applications to other programs. Mr. James R. French, of JRF Engineering Services and as a consultant to SAIC, has provided technical support to the X-37 NASA Program office since the beginning of the program. In providing this service, Mr. French has maintained close contact with the Boeing Seal Beach and Rocketdyne technical teams via telephone, e-mail, and periodic visits. His interfaces were primarily with the working engineers in order to provide NASA sponsors with a different view than that achieved through management channels. Mr. French's periodic and highly detailed technical reports were submitted to NASA and SAIC (Science Applications International Corporation) on a weekly/monthly basis. These reports addressed a wide spectrum of programmatic and technical interests related to the X-37 Program including vehicle design, flight sciences, propulsion, thermal protection, Guidance Navigation & Control (GN&C), structures, and operations. This deliverable is presented as a consolidation of the twelve monthly reports submitted during the Contract's Option Year,

  4. Reducing measurement errors during functional capacity tests in elders.

    PubMed

    da Silva, Mariane Eichendorf; Orssatto, Lucas Bet da Rosa; Bezerra, Ewertton de Souza; Silva, Diego Augusto Santos; Moura, Bruno Monteiro de; Diefenthaeler, Fernando; Freitas, Cíntia de la Rocha

    2018-06-01

    Accuracy is essential to the validity of functional capacity measurements. To evaluate the error of measurement of functional capacity tests for elders and suggest the use of the technical error of measurement and credibility coefficient. Twenty elders (65.8 ± 4.5 years) completed six functional capacity tests that were simultaneously filmed and timed by four evaluators by means of a chronometer. A fifth evaluator timed the tests by analyzing the videos (reference data). The means of most evaluators for most tests were different from the reference (p < 0.05), except for two evaluators for two different tests. There were different technical error of measurement between tests and evaluators. The Bland-Altman test showed difference in the concordance of the results between methods. Short duration tests showed higher technical error of measurement than longer tests. In summary, tests timed by a chronometer underestimate the real results of the functional capacity. Difference between evaluators' reaction time and perception to determine the start and the end of the tests would justify the errors of measurement. Calculation of the technical error of measurement or the use of the camera can increase data validity.

  5. A systematic literature review on security and privacy of electronic health record systems: technical perspectives.

    PubMed

    Rezaeibagha, Fatemeh; Win, Khin Than; Susilo, Willy

    Even though many safeguards and policies for electronic health record (EHR) security have been implemented, barriers to the privacy and security protection of EHR systems persist. This article presents the results of a systematic literature review regarding frequently adopted security and privacy technical features of EHR systems. Our inclusion criteria were full articles that dealt with the security and privacy of technical implementations of EHR systems published in English in peer-reviewed journals and conference proceedings between 1998 and 2013; 55 selected studies were reviewed in detail. We analysed the review results using two International Organization for Standardization (ISO) standards (29100 and 27002) in order to consolidate the study findings. Using this process, we identified 13 features that are essential to security and privacy in EHRs. These included system and application access control, compliance with security requirements, interoperability, integration and sharing, consent and choice mechanism, policies and regulation, applicability and scalability and cryptography techniques. This review highlights the importance of technical features, including mandated access control policies and consent mechanisms, to provide patients' consent, scalability through proper architecture and frameworks, and interoperability of health information systems, to EHR security and privacy requirements.

  6. Effects of juniper essential oil on growth performance, some rumen protozoa, rumen fermentation and antioxidant blood enzyme parameters of growing Saanen kids.

    PubMed

    Yesilbag, D; Biricik, H; Cetin, I; Kara, C; Meral, Y; Cengiz, S S; Orman, A; Udum, D

    2017-10-01

    This study aimed to evaluate the effects of juniper essential oil on the growth performance, rumen fermentation parameters, rumen protozoa population, blood antioxidant enzyme parameters and faecal content in growing Saanen kids. Thirty-six male Saanen kids (36 ± 14 days of age) were used in the study. Each group consisted of 9 kids. The control group (G1) was fed with a diet that consisted of the above concentrated feed and oat hay, whereas the experimental groups consumed the same diet but with the concentrated feed uniformly sprayed with juniper essential oil 0.4 ml/kg (G2), 0.8 ml/kg (G3) or 2 ml/kg (G4). There were no differences (p > 0.05) in live weight, live weight gain or feed consumption between the control and experimental groups. There was a significant improvement (p < 0.05) in feed efficiency in the G3 group. There were no differences in the rumen pH, rumen volatile fatty acid (VFA) profile or faecal pH of the control and experimental groups. The rumen NH 3 N values were similar at the middle and end of the experiment, but at the start of the experiment, the rumen NH 3 N values differed between the control and experimental groups (p < 0.05). The faecal score value was significantly (p < 0.05) decreased in the experimental groups. The addition of juniper essential oil supplementation to the rations caused significant effects on the kids' antioxidant blood parameters. Although the superoxide dismutase (SOD) activity, total antioxidant capacity (TAC) and catalase values were significantly (p < 0.05) increased in the experimental groups (G2, G3 and G4), especially group G4, the blood glutathione peroxidase (GPX) value significantly decreased in the experimental groups. The results of this study suggest that supplementation of juniper oil is more effective on antioxidant parameters than on performance parameters and may be used as a natural antioxidant product. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

  7. Rapid battery depletion and loss of therapy due to a short circuit in bipolar DBS for essential tremor.

    PubMed

    Allert, Niels; Barbe, Michael Thomas; Timmermann, Lars; Coenen, Volker Arnd

    2017-05-01

    Technical dysfunctions have been reported reducing efficacy of deep brain stimulation (DBS). Here, we report on an essential-tremor patient in whom a short circuit in bipolar DBS resulted not only in unilateral loss of therapy but also in high current flow and thereby rapid decline of the impulse-generator battery voltage from 2.83 V a week before the event to 2.54 V, indicating the need for an impulse-generator replacement. Immediate re-programming restored therapeutic efficacy. Moreover, the reduction in current flow allowed the battery voltage to recover without immediate surgical intervention to 2.81 V a week later.

  8. Preserving the Near-Earth Space Environment with Green Engineering and Operations

    NASA Technical Reports Server (NTRS)

    Johnson, Nicholas L.

    2009-01-01

    Green engineering and operations are essential to preserving the near-Earth space environment for future generations. The U.S. and the international aerospace community have been proactive in addressing the threat of the increasing orbital debris population and the risks to people and property from reentering debris. NASA has led this activity first by devoting resources to thoroughly understand the technical issues and then by developing effective and acceptable policies and guidelines. NASA also worked closely with the international community to ensure that the US aerospace industry was not placed at an economic disadvantage. In the long term, the removal of large orbital debris will be essential to the sustainability of space operations.

  9. Four malaria success stories: how malaria burden was successfully reduced in Brazil, Eritrea, India, and Vietnam.

    PubMed

    Barat, Lawrence M

    2006-01-01

    While many countries struggle to control malaria, four countries, Brazil, Eritrea, India, and Vietnam, have successfully reduced malaria burden. To determine what led these countries to achieve impact, published and unpublished reports were reviewed and selected program and partner staff were interviewed to identify common factors that contributed to these successes. Common success factors included conducive country conditions, a targeted technical approach using a package of effective tools, data-driven decision-making, active leadership at all levels of government, involvement of communities, decentralized implementation and control of finances, skilled technical and managerial capacity at national and sub-national levels, hands-on technical and programmatic support from partner agencies, and sufficient and flexible financing. All these factors were essential in achieving success. If the goals of Roll Back Malaria are to be achieved, governments and their partners must take the lessons learned from these program successes and apply them in other affected countries.

  10. Comparison of two text message (mHealth) campaigns for the Deaf: Contracted out v. conducted in-house.

    PubMed

    Hacking, Damian; Lau, Yan Kwan; Haricharan, Hanne Jensen; Heap, Marion

    2015-11-20

    Cell phone-based health information (mobile health or mHealth) campaigns are an emerging technology. This evaluation focused on the aspect of cost of two health information campaigns, one on hypertension and one on pregnancy. Researchers could either contract out the technical components of the campaigns or attempt to run the campaigns themselves, in-house. The in-house campaigns cost an estimated ZAR13 548.72 v. the private provider quotes which ranged from ZAR27 542.97 to ZAR34 227.59. Running the campaigns in-house was more labour intensive and required more technical expertise, but had a reduced delivery failure rate (9.2% in-house v. 30.0% private provider). Running small to medium SMS (text message) campaigns for evaluative purposes proved advantageous over contracting out to private providers. Larger-scale evaluations and full-scale roll-out will require the services of private providers, but it is still essential that researchers actively engage with and monitor the technical aspects of these campaigns.

  11. [The relationships between organizations for technical cooperation in health and private consulting businesses].

    PubMed

    Barillas, Edgar

    2003-01-01

    In recent years, agencies that provide technical cooperation in health have increased their contractual relationships with private consulting entities. This has made it possible to respond in a timely manner to the support needs that countries have, to develop skills at the national level, and to reduce the operating costs for the cooperation agencies. However, these relationships risk moving the cooperation agencies away from generating ideas and new knowledge, which, until recently, was considered one of their essential roles. Contracting with private enterprises will almost certainly increase in the coming years. This makes it worth reviewing the tasks that correspond to the cooperation agencies in this scenario as well as mechanisms to see that these relationships result in the greatest benefit for deprived groups. Actions that can be undertaken immediately include organizing the "structural capital" (such as programs, databases, strategies, and organizational "culture," structure, systems, and procedures) of the technical cooperation agencies, precisely identifying tasks that cannot be delegated, and adequately designing and controlling terms of reference.

  12. Cybersecurity vulnerabilities in medical devices: a complex environment and multifaceted problem

    PubMed Central

    Williams, Patricia AH; Woodward, Andrew J

    2015-01-01

    The increased connectivity to existing computer networks has exposed medical devices to cybersecurity vulnerabilities from which they were previously shielded. For the prevention of cybersecurity incidents, it is important to recognize the complexity of the operational environment as well as to catalog the technical vulnerabilities. Cybersecurity protection is not just a technical issue; it is a richer and more intricate problem to solve. A review of the factors that contribute to such a potentially insecure environment, together with the identification of the vulnerabilities, is important for understanding why these vulnerabilities persist and what the solution space should look like. This multifaceted problem must be viewed from a systemic perspective if adequate protection is to be put in place and patient safety concerns addressed. This requires technical controls, governance, resilience measures, consolidated reporting, context expertise, regulation, and standards. It is evident that a coordinated, proactive approach to address this complex challenge is essential. In the interim, patient safety is under threat. PMID:26229513

  13. Cybersecurity vulnerabilities in medical devices: a complex environment and multifaceted problem.

    PubMed

    Williams, Patricia Ah; Woodward, Andrew J

    2015-01-01

    The increased connectivity to existing computer networks has exposed medical devices to cybersecurity vulnerabilities from which they were previously shielded. For the prevention of cybersecurity incidents, it is important to recognize the complexity of the operational environment as well as to catalog the technical vulnerabilities. Cybersecurity protection is not just a technical issue; it is a richer and more intricate problem to solve. A review of the factors that contribute to such a potentially insecure environment, together with the identification of the vulnerabilities, is important for understanding why these vulnerabilities persist and what the solution space should look like. This multifaceted problem must be viewed from a systemic perspective if adequate protection is to be put in place and patient safety concerns addressed. This requires technical controls, governance, resilience measures, consolidated reporting, context expertise, regulation, and standards. It is evident that a coordinated, proactive approach to address this complex challenge is essential. In the interim, patient safety is under threat.

  14. An approach to developing independent learning and non-technical skills amongst final year mining engineering students

    NASA Astrophysics Data System (ADS)

    Knobbs, C. G.; Grayson, D. J.

    2012-06-01

    There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called 'soft' skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was designed to promote independent learning and to develop non-technical skills, essential for students on the threshold of becoming practising engineers. Three psychometric tests were administered at the beginning of the course to make students aware of their own and their classmates' characteristics. Substantial prescribed reading assignments preceded weekly group discussions. Several projects during the course required team work skills and application of content knowledge to real-world contexts. Results obtained from students' reflection papers, assignments related to 'soft' skills and end of course evaluations suggest that students' appreciation of the need for these skills, as well as their own perceived competence, increased during the course. Their ability to function as independent learners also increased.

  15. Impact of Testosterone, Zinc, Calcium and Magnesium Concentrations on Sperm Parameters in Subfertile Men

    NASA Astrophysics Data System (ADS)

    Aydemir, Birsen; Kiziler, Ali Riza; Onaran, Ilhan; Alici, Bülent; Özkara, Hamdi; Akyolcu, Mehmet Can

    2007-04-01

    To investigate the impact of testosterone, zinc, calcium and magnesium concentrations in serum and seminal plasma on sperm parameters. There were significant decrease in sperm parameters, serum and seminal plasma zinc levels in subfertile males. It indicates zinc has a essential role in male infertility; the determination the level of zinc during infertility investigation is recommended.

  16. [Acoustic conditions in open plan office - Application of technical measures in a typical room].

    PubMed

    Mikulski, Witold

    2018-03-09

    Noise in open plan offices should not exceed acceptable levels for the hearing protection. Its major negative effects on employees are nuisance and impediment in execution of work. Specific technical solutions should be introduced to provide proper acoustic conditions for work performance. Acoustic evaluation of a typical open plan office was presented in the article published in "Medycyna Pracy" 5/2016. None of the rooms meets all the criteria, therefore, in this article one of the rooms was chosen to apply different technical solutions to check the possibility of reaching proper acoustic conditions. Acoustic effectiveness of those solutions was verified by means of digital simulation. The model was checked by comparing the results of measurements and calculations before using simulation. The analyzis revealed that open plan offices supplemented with signals for masking speech signals can meet all the required criteria. It is relatively easy to reach proper reverberation time (i.e., sound absorption). It is more difficult to reach proper values of evaluation parameters determined from A-weighted sound pressure level (SPLA) of speech. The most difficult is to provide proper values of evaluation parameters determined from speech transmission index (STI). Finally, it is necessary (besides acoustic treatment) to use devices for speech masking. The study proved that it is technically possible to reach proper acoustic condition. Main causes of employees complaints in open plan office are inadequate acoustic work conditions. Therefore, it is necessary to apply specific technical solutions - not only sound absorbing suspended ceiling and high acoustic barriers, but also devices for speech masking. Med Pr 2018;69(2):153-165. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  17. Approaches to self-assembly of colloidal monolayers: A guide for nanotechnologists.

    PubMed

    Lotito, Valeria; Zambelli, Tomaso

    2017-08-01

    Self-assembly of quasi-spherical colloidal particles in two-dimensional (2D) arrangements is essential for a wide range of applications from optoelectronics to surface engineering, from chemical and biological sensing to light harvesting and environmental remediation. Several self-assembly approaches have flourished throughout the years, with specific features in terms of complexity of the implementation, sensitivity to process parameters, characteristics of the final colloidal assembly. Selecting the proper method for a given application amidst the vast literature in this field can be a challenging task. In this review, we present an extensive classification and comparison of the different techniques adopted for 2D self-assembly in order to provide useful guidelines for scientists approaching this field. After an overview of the main applications of 2D colloidal assemblies, we describe the main mechanisms underlying their formation and introduce the mathematical tools commonly used to analyse their final morphology. Subsequently, we examine in detail each class of self-assembly techniques, with an explanation of the physical processes intervening in crystallization and a thorough investigation of the technical peculiarities of the different practical implementations. We point out the specific characteristics of the set-ups and apparatuses developed for self-assembly in terms of complexity, requirements, reproducibility, robustness, sensitivity to process parameters and morphology of the final colloidal pattern. Such an analysis will help the reader to individuate more easily the approach more suitable for a given application and will draw the attention towards the importance of the details of each implementation for the final results. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Land mobile communications in Ku-band - Results of a test campaign on Eutelsat I-F1

    NASA Astrophysics Data System (ADS)

    Dutronc, J.; Colcy, J. N.

    1990-02-01

    This paper discusses the results of technical tests on land mobile communications conducted in June and July 1989 in Europe using a Eutelsat satellite. The land-mobile communication system under test was that already operated by QUALCOMM in the U.S. under the registered name OmniTRACS. The aim of the field trial was to evaluate the technical characteristics of the system and test its performance in different operating conditions. The results establish the relationship between transmission performance (i.e. essentially the required number of transmission attempts in order to get a message through the communication channel), and the environment of the land mobile, the satellite transponder's mode of operations and the interference conditions.

  19. A facile fluorescent "turn-off" method for sensing paraquat based on pyranine-paraquat interaction

    NASA Astrophysics Data System (ADS)

    Zhao, Zuzhi; Zhang, Fengwei; Zhang, Zipin

    2018-06-01

    Development of a technically simple yet effective method for paraquat (PQ) detection is of great importance due to its high clinical and environmental relevance. In this study, we developed a pyranine-based fluorescent "turn-off" method for PQ sensing based on pyranine-PQ interaction. We investigated the dependence of analytical performance of this method on the experimental conditions, such as the ion strength, medium pH, and so on. Under the optimized conditions, the method is sensitive and selective, and could be used for PQ detection in real-world sample. This study essentially provides a readily accessible fluorescent system for PQ sensing which is cheap, robust, and technically simple, and it is envisaged to find more interesting clinical and environmental applications.

  20. System approach to modeling of industrial technologies

    NASA Astrophysics Data System (ADS)

    Toropov, V. S.; Toropov, E. S.

    2018-03-01

    The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

  1. Technical Report for Calculations of Atmospheric Dispersion at Onsite Locations for Department of Energy Nuclear Facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Levin, Alan; Chaves, Chris

    2015-04-04

    The Department of Energy (DOE) has performed an evaluation of the technical bases for the default value for the atmospheric dispersion parameter χ/Q. This parameter appears in the calculation of radiological dose at the onsite receptor location (co-located worker at 100 meters) in safety analysis of DOE nuclear facilities. The results of the calculation are then used to determine whether safety significant engineered controls should be established to prevent and/or mitigate the event causing the release of hazardous material. An evaluation of methods for calculation of the dispersion of potential chemical releases for the purpose of estimating the chemical exposuremore » at the co-located worker location was also performed. DOE’s evaluation consisted of: (a) a review of the regulatory basis for the default χ/Q dispersion parameter; (b) an analysis of this parameter’s sensitivity to various factors that affect the dispersion of radioactive material; and (c) performance of additional independent calculations to assess the appropriate use of the default χ/Q value.« less

  2. [Study on the automatic parameters identification of water pipe network model].

    PubMed

    Jia, Hai-Feng; Zhao, Qi-Feng

    2010-01-01

    Based on the problems analysis on development and application of water pipe network model, the model parameters automatic identification is regarded as a kernel bottleneck of model's application in water supply enterprise. The methodology of water pipe network model parameters automatic identification based on GIS and SCADA database is proposed. Then the kernel algorithm of model parameters automatic identification is studied, RSA (Regionalized Sensitivity Analysis) is used for automatic recognition of sensitive parameters, and MCS (Monte-Carlo Sampling) is used for automatic identification of parameters, the detail technical route based on RSA and MCS is presented. The module of water pipe network model parameters automatic identification is developed. At last, selected a typical water pipe network as a case, the case study on water pipe network model parameters automatic identification is conducted and the satisfied results are achieved.

  3. Gene essentiality and the topology of protein interaction networks

    PubMed Central

    Coulomb, Stéphane; Bauer, Michel; Bernard, Denis; Marsolier-Kergoat, Marie-Claude

    2005-01-01

    The mechanistic bases for gene essentiality and for cell mutational resistance have long been disputed. The recent availability of large protein interaction databases has fuelled the analysis of protein interaction networks and several authors have proposed that gene dispensability could be strongly related to some topological parameters of these networks. However, many results were based on protein interaction data whose biases were not taken into account. In this article, we show that the essentiality of a gene in yeast is poorly related to the number of interactants (or degree) of the corresponding protein and that the physiological consequences of gene deletions are unrelated to several other properties of proteins in the interaction networks, such as the average degrees of their nearest neighbours, their clustering coefficients or their relative distances. We also found that yeast protein interaction networks lack degree correlation, i.e. a propensity for their vertices to associate according to their degrees. Gene essentiality and more generally cell resistance against mutations thus seem largely unrelated to many parameters of protein network topology. PMID:16087428

  4. Convergence properties of simple genetic algorithms

    NASA Technical Reports Server (NTRS)

    Bethke, A. D.; Zeigler, B. P.; Strauss, D. M.

    1974-01-01

    The essential parameters determining the behaviour of genetic algorithms were investigated. Computer runs were made while systematically varying the parameter values. Results based on the progress curves obtained from these runs are presented along with results based on the variability of the population as the run progresses.

  5. Renewable Energy Data, Analysis, and Decisions: A Guide for Practitioners

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cox, Sarah L; Lopez, Anthony J; Watson, Andrea C

    High-quality renewable energy resource data and other geographic information system (GIS) data are essential for the transition to a clean energy economy that prioritizes local resources, improves resiliency, creates jobs, and promotes energy independence. This guide is intended to support policymakers and planners, as well as technical experts, consultants, and academics in incorporating improved data and analysis into renewable energy decision-making.

  6. Modified irrigation hose placement in draping for craniotomy: provision of a free foot space for surgeons: technical note.

    PubMed

    Shimizu, S; Utsuki, S; Suzuki, S; Oka, H; Yamada, M; Fujii, K

    2008-04-01

    Sterility and utility are essential in surgical draping. For craniotomy, we modified the course of the irrigation hose to maintain a free foot space for the surgeon by connection with a suction bottle placed beside the patient's body through a slit made in the linen. This minor modification provides convenience to the surgeon during operations.

  7. Child's Play: Therapist's Narrative

    PubMed Central

    Reddy, Rajakumari P.; Hirisave, Uma

    2014-01-01

    Play has been recognized as an essential component to children's healthy development. Schools of play therapy differ philosophically and technically, but they all embrace the therapeutic and developmental properties of play. This case report is an illustration of how a 6-year-old child with emotional disorder was facilitated to express concerns in child-centered play therapy. The paper discusses the therapist's narration of the child's play. PMID:24860228

  8. Standardization of Assistive Products with Robotic Technology - From a Perspective of ISO/TC173.

    PubMed

    Inoue, Takenobu; Yamauchi, Shigeru; Westman, Karl-Erik

    2017-01-01

    ISO/TC173 is a technical committee, in charge of international standardization of assistive products (APs). Robotic technology (RT) is currently an important topic in this field. APs with RT will be included in future revisions of the scope of TC173. Cooperation between the AP and RT space is essential to reach suitable solutions of future standardization.

  9. Astronomers and the Media: What Reporters Expect

    NASA Astrophysics Data System (ADS)

    Siedgfried, Tom; Witze, Alexandra

    2006-01-01

    Journalists writing about astronomy bring varying levels of knowledge to the task. Most rely on astronomers for help. To be most helpful, astronomers should familiarize themselves with the practices and needs of journalists and learn effective methods for presenting astronomy via news releases, interviews and news conferences. In all aspects of communicating with the media, the ability to express technical findings in plain language is essential.

  10. Skin prick tests and allergy diagnosis.

    PubMed

    Antunes, João; Borrego, Luís; Romeira, Ana; Pinto, Paula

    2009-01-01

    Skin testing remains an essential diagnostic tool in modern allergy practice. A significant variability has been reported regarding technical procedures, interpretation of results and documentation. This review has the aim of consolidating methodological recommendations through a critical analysis on past and recent data. This will allow a better understanding on skin prick test (SPT) history; technique; (contra-) indications; interpretation of results; diagnostic pitfalls; adverse reactions; and variability factors.

  11. Teacher Survey of the Accessibility and Text Features of the Computerized Oral Reading Evaluation (CORE). Technical Report #1601

    ERIC Educational Resources Information Center

    Kahn, Josh; Nese, Joseph T.; Alonzo, Julie

    2016-01-01

    There is strong theoretical support for oral reading fluency (ORF) as an essential building block of reading proficiency. The current and standard ORF assessment procedure requires that students read aloud a grade-level passage (˜ 250 words) in a one-to-one administration, with the number of words read correctly in 60 seconds constituting their…

  12. Comprehensive report of aeropropulsion, space propulsion, space power, and space science applications of the Lewis Research Center

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The research activities of the Lewis Research Center for 1988 are summarized. The projects included are within basic and applied technical disciplines essential to aeropropulsion, space propulsion, space power, and space science/applications. These disciplines are materials science and technology, structural mechanics, life prediction, internal computational fluid mechanics, heat transfer, instruments and controls, and space electronics.

  13. Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

    NASA Astrophysics Data System (ADS)

    Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

    2017-08-01

    In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

  14. Visuospatial and Technical Ability in the Selection and Assessment of Higher Surgical Trainees in the London Deanery

    PubMed Central

    Tansley, P; Kakar, S; Withey, S; Butler, P

    2007-01-01

    INTRODUCTION Despite awareness of the limitations of current selection and competency assessments, there is little consensus and alternatives have not been readily accepted. Essential surgical skills include visuospatial and technical ability. The aim of this study was to survey current methods of higher surgical trainee selection and assessment. We suggest ways to improve the process. MATERIALS AND METHODS Nine surgical training programmes in the London deanery were surveyed through questionnaires to programme directors, existing trainees and examination of deanery publications. RESULTS Testing of visuospatial and technical ability was piloted at selection only in a single general surgical department. Practical skills were assessed in 3/9 (33%) specialties (ENT, plastic and general surgery). Once selected, no specialty tested visuospatial and technical ability. Practical skills were tested in only 1/9 (11%) specialties (plastic surgery). The remaining 8/9 (89%) were ‘assessed’ by interview. CONCLUSIONS Lack of visuospatial and technical ability assessment was identified at selection and during higher surgical training. Airlines have long recognised early identification of these qualities as critical for efficient training. There is a need for more objective methods in this area prior to selection as time to assess surgical trainees during long apprenticeships is no longer available. We advocate a suitably validated competency-based model during and at completion of training. PMID:18201473

  15. Myocardial contrast echocardiography in mice: technical and physiological aspects.

    PubMed

    Verkaik, Melissa; van Poelgeest, Erik M; Kwekkeboom, Rick F J; Ter Wee, Piet M; van den Brom, Charissa E; Vervloet, Marc G; Eringa, Etto C

    2018-03-01

    Myocardial contrast echocardiography (MCE) offers the opportunity to study myocardial perfusion defects in mice in detail. The value of MCE compared with single-photon emission computed tomography, positron emission tomography, and computed tomography consists of high spatial resolution, the possibility of quantification of blood volume, and relatively low costs. Nevertheless, a number of technical and physiological aspects should be considered to ensure reproducibility among research groups. The aim of this overview is to describe technical aspects of MCE and the physiological parameters that influence myocardial perfusion data obtained with this technique. First, technical aspects of MCE discussed in this technical review are logarithmic compression of ultrasound data by ultrasound systems, saturation of the contrast signal, and acquisition of images during different phases of the cardiac cycle. Second, physiological aspects of myocardial perfusion that are affected by the experimental design are discussed, including the anesthesia regimen, systemic cardiovascular effects of vasoactive agents used, and fluctuations in body temperature that alter myocardial perfusion. When these technical and physiological aspects of MCE are taken into account and adequately standardized, MCE is an easily accessible technique for mice that can be used to study the control of myocardial perfusion by a wide range of factors.

  16. Military display performance parameters

    NASA Astrophysics Data System (ADS)

    Desjardins, Daniel D.; Meyer, Frederick

    2012-06-01

    The military display market is analyzed in terms of four of its segments: avionics, vetronics, dismounted soldier, and command and control. Requirements are summarized for a number of technology-driving parameters, to include luminance, night vision imaging system compatibility, gray levels, resolution, dimming range, viewing angle, video capability, altitude, temperature, shock and vibration, etc., for direct-view and virtual-view displays in cockpits and crew stations. Technical specifications are discussed for selected programs.

  17. Observation of behavioural markers of non-technical skills in the operating room and their relationship to intra-operative incidents.

    PubMed

    Siu, Joey; Maran, Nikki; Paterson-Brown, Simon

    2016-06-01

    The importance of non-technical skills in improving surgical safety and performance is now well recognised. Better understanding is needed of the impact that non-technical skills of the multi-disciplinary theatre team have on intra-operative incidents in the operating room (OR) using structured theatre-based assessment. The interaction of non-technical skills that influence surgical safety of the OR team will be explored and made more transparent. Between May-August 2013, a range of procedures in general and vascular surgery in the Royal Infirmary of Edinburgh were performed. Non-technical skills behavioural markers and associated intra-operative incidents were recorded using established behavioural marking systems (NOTSS, ANTS and SPLINTS). Adherence to the surgical safety checklist was also observed. A total of 51 procedures were observed, with 90 recorded incidents - 57 of which were considered avoidable. Poor situational awareness was a common area for surgeons and anaesthetists leading to most intra-operative incidents. Poor communication and teamwork across the whole OR team had a generally large impact on intra-operative incidents. Leadership was shown to be an essential set of skills for the surgeons as demonstrated by the high correlation of poor leadership with intra-operative incidents. Team-working and management skills appeared to be especially important for anaesthetists in the recovery from an intra-operative incident. A significant number of avoidable incidents occur during operative procedures. These can all be linked to failures in non-technical skills. Better training of both individual and team in non-technical skills is needed in order to improve patient safety in the operating room. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

  18. Honey Antibacterial Effect Boosting Using Origanum vulgare L. Essential Oil

    PubMed Central

    Imtara, Hamada; Elamine, Youssef

    2018-01-01

    The appearance of new bacterial strains which cause pathogenic diseases and which are resistant to the most used antibiotics requires probing new antibacterial agents sources. Therefore, the main aim of the present work was to follow the antibacterial activity of honey samples from Palestine and Morocco, after the combination with Origanum vulgare L. essential oil, and figure out whether the honey physicochemical parameters and geographic origin influence the final activity. The results of this study showed good geographical discrimination between the Palestinians and Moroccan honey samples. The antioxidant and antimicrobial activities showed a significant correlation with honey color, melanoidins, and phenolic and flavonoids contents. Furthermore, the possible effect of honey physicochemical parameters on the gained antimicrobial activities was assessed using the principal component analysis (PCA). Some parameters showed a promising effect and seem to be important in the process of honey samples selection. Namely, melanoidins content, phenolic content, electrical conductivity, and mineral content were shown to be positively influencing the gained antibacterial activity after the combination with essential oil against the tested strains, although a significant negative correlation was seen with the FIC only in the case of Escherichia coli (ATB: 57). PMID:29736180

  19. Honey Antibacterial Effect Boosting Using Origanum vulgare L. Essential Oil.

    PubMed

    Imtara, Hamada; Elamine, Youssef; Lyoussi, Badiâa

    2018-01-01

    The appearance of new bacterial strains which cause pathogenic diseases and which are resistant to the most used antibiotics requires probing new antibacterial agents sources. Therefore, the main aim of the present work was to follow the antibacterial activity of honey samples from Palestine and Morocco, after the combination with Origanum vulgare L. essential oil, and figure out whether the honey physicochemical parameters and geographic origin influence the final activity. The results of this study showed good geographical discrimination between the Palestinians and Moroccan honey samples. The antioxidant and antimicrobial activities showed a significant correlation with honey color, melanoidins, and phenolic and flavonoids contents. Furthermore, the possible effect of honey physicochemical parameters on the gained antimicrobial activities was assessed using the principal component analysis (PCA). Some parameters showed a promising effect and seem to be important in the process of honey samples selection. Namely, melanoidins content, phenolic content, electrical conductivity, and mineral content were shown to be positively influencing the gained antibacterial activity after the combination with essential oil against the tested strains, although a significant negative correlation was seen with the FIC only in the case of Escherichia coli (ATB: 57).

  20. Kernel Ada Programming Support Environment (KAPSE) Interface Team: Public Report. Volume II.

    DTIC Science & Technology

    1982-10-28

    essential I parameters from our work so far in this area and, using trade-offs concerning these, construct the KIT’s recommended alternative. 1145...environment that are also in the development states. At this point in development it is essential for the KITEC to provide a forum and act as a focal...standardization in this area. Moreover, this is an area with considerable divergence in proposed approaches. Or the other hand, an essential tool from the point of

  1. JPRS Report, Science & Technology Europe

    DTIC Science & Technology

    1988-05-10

    given environment essentially depends on three parameters ; these are: • the adhesion between the adhesive and the supports; • the cohesion of the...durability/CND J Electric current under high field/Tensile test at 4 degrees K I Synthetic hydroxyapatite /behavior under friction and wear GB NaCl, s...French programs GB Inventory of accelerated test procedures, correlation among parameters FC Influence of experimental parameters 8615 JPRS-EST-88

  2. Psychomotor performance measured in a virtual environment correlates with technical skills in the operating room.

    PubMed

    Kundhal, Pavi S; Grantcharov, Teodor P

    2009-03-01

    This study was conducted to validate the role of virtual reality computer simulation as an objective method for assessing laparoscopic technical skills. The authors aimed to investigate whether performance in the operating room, assessed using a modified Objective Structured Assessment of Technical Skill (OSATS), correlated with the performance parameters registered by a virtual reality laparoscopic trainer (LapSim). The study enrolled 10 surgical residents (3 females) with a median of 5.5 years (range, 2-6 years) since graduation who had similar limited experience in laparoscopic surgery (median, 5; range, 1-16 laparoscopic cholecystectomies). All the participants performed three repetitions of seven basic skills tasks on the LapSim laparoscopic trainer and one laparoscopic cholecystectomy in the operating room. The operating room procedure was video recorded and blindly assessed by two independent observers using a modified OSATS rating scale. Assessment in the operating room was based on three parameters: time used, error score, and economy of motion score. During the tasks on the LapSim, time, error (tissue damage and millimeters of tissue damage [tasks 2-6], error score [incomplete target areas, badly placed clips, and dropped clips [task 7]), and economy of movement parameters (path length and angular path) were registered. The correlation between time, economy, and error parameters during the simulated tasks and the operating room procedure was statistically assessed using Spearman's test. Significant correlations were demonstrated between the time used to complete the operating room procedure and time used for task 7 (r (s) = 0.74; p = 0.015). The error score demonstrated during the laparoscopic cholecystectomy correlated well with the tissue damage in three of the seven tasks (p < 0.05), the millimeters of tissue damage during two of the tasks, and the error score in task 7 (r (s) = 0.67; p = 0.034). Furthermore, statistically significant correlations were observed between the economy of motion score from the operative procedure and LapSim's economy parameters (path length and angular path in six of the tasks) (p < 0.05). The current study demonstrated significant correlations between operative performance in the operating room (assessed using a well-validated rating scale) and psychomotor performance in virtual environment assessed by a computer simulator. This provides strong evidence for the validity of the simulator system as an objective tool for assessing laparoscopic skills. Virtual reality simulation can be used in practice to assess technical skills relevant for minimally invasive surgery.

  3. ProUCL Version 4.0 Technical Guide

    EPA Science Inventory

    Statistical inference, including both estimation and hypotheses testing approaches, is routinely used to: estimate environmental parameters of interest, such as exposure point concentration (EPC) terms, not-to-exceed values, and background level threshold values (BTVs) for contam...

  4. Application for certification, 1990 model-year light-duty vehicles - US Technical Research Company (Peugeot)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  5. Application for certification, 1989 model year light-duty vehicles - US Technical Research Company (Peugeot)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  6. Technical Review of SRS Dose Reconstrruction Methods Used By CDC

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Simpkins, Ali, A

    2005-07-20

    At the request of the Centers for Disease Control and Prevention (CDC), a subcontractor Advanced Technologies and Laboratories International, Inc.(ATL) issued a draft report estimating offsite dose as a result of Savannah River Site operations for the period 1954-1992 in support of Phase III of the SRS Dose Reconstruction Project. The doses reported by ATL differed than those previously estimated by Savannah River Site SRS dose modelers for a variety of reasons, but primarily because (1) ATL used different source terms, (2) ATL considered trespasser/poacher scenarios and (3) ATL did not consistently use site-specific parameters or correct usage parameters. Themore » receptors with the highest dose from atmospheric and liquid pathways were within about a factor of four greater than dose values previously reported by SRS. A complete set of technical comments have also been included.« less

  7. Can Anomalous Amplification be Attained without Postselection?

    PubMed

    Martínez-Rincón, Julián; Liu, Wei-Tao; Viza, Gerardo I; Howell, John C

    2016-03-11

    We present a parameter estimation technique based on performing joint measurements of a weak interaction away from the weak-value-amplification approximation. Two detectors are used to collect full statistics of the correlations between two weakly entangled degrees of freedom. Without discarding of data, the protocol resembles the anomalous amplification of an imaginary-weak-value-like response. The amplification is induced in the difference signal of both detectors allowing robustness to different sources of technical noise, and offering in addition the advantages of balanced signals for precision metrology. All of the Fisher information about the parameter of interest is collected. A tunable phase controls the strength of the amplification response. We experimentally demonstrate the proposed technique by measuring polarization rotations in a linearly polarized laser pulse. We show that in the presence of technical noise the effective sensitivity and precision of a split detector is increased when compared to a conventional continuous-wave balanced detection technique.

  8. Can Anomalous Amplification be Attained without Postselection?

    NASA Astrophysics Data System (ADS)

    Martínez-Rincón, Julián; Liu, Wei-Tao; Viza, Gerardo I.; Howell, John C.

    2016-03-01

    We present a parameter estimation technique based on performing joint measurements of a weak interaction away from the weak-value-amplification approximation. Two detectors are used to collect full statistics of the correlations between two weakly entangled degrees of freedom. Without discarding of data, the protocol resembles the anomalous amplification of an imaginary-weak-value-like response. The amplification is induced in the difference signal of both detectors allowing robustness to different sources of technical noise, and offering in addition the advantages of balanced signals for precision metrology. All of the Fisher information about the parameter of interest is collected. A tunable phase controls the strength of the amplification response. We experimentally demonstrate the proposed technique by measuring polarization rotations in a linearly polarized laser pulse. We show that in the presence of technical noise the effective sensitivity and precision of a split detector is increased when compared to a conventional continuous-wave balanced detection technique.

  9. Effect of Oregano Essential Oil (Origanum vulgare subsp. hirtum) on the Storage Stability and Quality Parameters of Ground Chicken Breast Meat.

    PubMed

    Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

    2016-06-07

    A study was conducted to investigate the effect of oregano essential oil on the oxidative stability and color of raw and cooked chicken breast meats. Five treatments, including (1) control (none added); (2) 100 ppm oregano essential oil; (3) 300 ppm oregano essential oil; (4) 400 ppm oregano essential oil; and (5) 5 ppm butylated hydroxyanisole (BHA), were prepared with ground boneless, skinless chicken breast meat and used for both raw and cooked meat studies. For raw meat study, samples were individually packaged in oxygen-permeable bags and stored in a cold room (4 °C) for 7 days. For cooked meat study, the raw meat samples were vacuum-packaged in oxygen-impermeable vacuum bags and then cooked in-bag to an internal temperature of 75 °C. After cooling to room temperature, the cooked meats were repackaged in new oxygen-permeable bags and then stored at 4 °C for 7 days. Both raw and cooked meats were analyzed for lipid and protein oxidation, volatiles, and color at 0, 3, and 7 days of storage. Oregano essential oil significantly reduced (p < 0.05) lipid and protein oxidation, and improved color stability of raw and cooked meat. However, oregano oil at 400 ppm showed the strongest effect for all these parameters. Hexanal was the major aldehyde, which was decreased significantly (p < 0.05) by oregano oil treatment, in cooked meat. Overall, oregano essential oil at 100-400 ppm levels could be a good preservative that can replace the synthetic antioxidant in chicken meat.

  10. Effect of Oregano Essential Oil (Origanum vulgare subsp. hirtum) on the Storage Stability and Quality Parameters of Ground Chicken Breast Meat

    PubMed Central

    Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

    2016-01-01

    A study was conducted to investigate the effect of oregano essential oil on the oxidative stability and color of raw and cooked chicken breast meats. Five treatments, including (1) control (none added); (2) 100 ppm oregano essential oil; (3) 300 ppm oregano essential oil; (4) 400 ppm oregano essential oil; and (5) 5 ppm butylated hydroxyanisole (BHA), were prepared with ground boneless, skinless chicken breast meat and used for both raw and cooked meat studies. For raw meat study, samples were individually packaged in oxygen-permeable bags and stored in a cold room (4 °C) for 7 days. For cooked meat study, the raw meat samples were vacuum-packaged in oxygen-impermeable vacuum bags and then cooked in-bag to an internal temperature of 75 °C. After cooling to room temperature, the cooked meats were repackaged in new oxygen-permeable bags and then stored at 4 °C for 7 days. Both raw and cooked meats were analyzed for lipid and protein oxidation, volatiles, and color at 0, 3, and 7 days of storage. Oregano essential oil significantly reduced (p < 0.05) lipid and protein oxidation, and improved color stability of raw and cooked meat. However, oregano oil at 400 ppm showed the strongest effect for all these parameters. Hexanal was the major aldehyde, which was decreased significantly (p < 0.05) by oregano oil treatment, in cooked meat. Overall, oregano essential oil at 100–400 ppm levels could be a good preservative that can replace the synthetic antioxidant in chicken meat. PMID:27338486

  11. Single neuron modeling and data assimilation in BNST neurons

    NASA Astrophysics Data System (ADS)

    Farsian, Reza

    Neurons, although tiny in size, are vastly complicated systems, which are responsible for the most basic yet essential functions of any nervous system. Even the most simple models of single neurons are usually high dimensional, nonlinear, and contain many parameters and states which are unobservable in a typical neurophysiological experiment. One of the most fundamental problems in experimental neurophysiology is the estimation of these parameters and states, since knowing their values is essential in identification, model construction, and forward prediction of biological neurons. Common methods of parameter and state estimation do not perform well for neural models due to their high dimensionality and nonlinearity. In this dissertation, two alternative approaches for parameters and state estimation of biological neurons have been demonstrated: dynamical parameter estimation (DPE) and a Markov Chain Monte Carlo (MCMC) method. The first method uses elements of chaos control and synchronization theory for parameter and state estimation. MCMC is a statistical approach which uses a path integral formulation to evaluate a mean and an error bound for these unobserved parameters and states. These methods have been applied to biological system of neurons in Bed Nucleus of Stria Termialis neurons (BNST) of rats. State and parameters of neurons in both systems were estimated, and their value were used for recreating a realistic model and predicting the behavior of the neurons successfully. The knowledge of biological parameters can ultimately provide a better understanding of the internal dynamics of a neuron in order to build robust models of neuron networks.

  12. Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac.

    PubMed

    Chen, Guang-Pei; Ahunbay, Ergun; Li, X Allen

    2016-04-01

    To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data are accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose-volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.

  13. Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Guang-Pei, E-mail: gpchen@mcw.edu; Ahunbay, Ergun; Li, X. Allen

    Purpose: To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. Methods: The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data aremore » accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose–volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. Results: ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. Conclusions: The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.« less

  14. Competing Uses of Underground Systems Related to Energy Supply: Applying Single- and Multiphase Simulations for Site Characterization and Risk-Analysis

    NASA Astrophysics Data System (ADS)

    Kissinger, A.; Walter, L.; Darcis, M.; Flemisch, B.; Class, H.

    2012-04-01

    Global climate change, shortage of resources and the resulting turn towards renewable sources of energy lead to a growing demand for the utilization of subsurface systems. Among these competing uses are Carbon Capture and Storage (CCS), geothermal energy, nuclear waste disposal, "renewable" methane or hydrogen storage as well as the ongoing production of fossil resources like oil, gas, and coal. Besides competing among themselves, these technologies may also create conflicts with essential public interests like water supply. For example, the injection of CO2 into the underground causes an increase in pressure reaching far beyond the actual radius of influence of the CO2 plume, potentially leading to large amounts of displaced salt water. Finding suitable sites is a demanding task for several reasons. Natural systems as opposed to technical systems are always characterized by heterogeneity. Therefore, parameter uncertainty impedes reliable predictions towards capacity and safety of a site. State of the art numerical simulations combined with stochastic approaches need to be used to obtain a more reliable assessment of the involved risks and the radii of influence of the different processes. These simulations may include the modeling of single- and multiphase non-isothermal flow, geo-chemical and geo-mechanical processes in order to describe all relevant physical processes adequately. Stochastic approaches have the aim to estimate a bandwidth of the key output parameters based on uncertain input parameters. Risks for these different underground uses can then be made comparable with each other. Along with the importance and the urgency of the competing processes this may lead to a more profound basis for a decision. Communicating risks to stake holders and a concerned public is crucial for the success of finding a suitable site for CCS (or other subsurface utilization). We present and discuss first steps towards an approach for addressing the issue of competitive utilization of the subsurface and the required process of communication between scientists, engineers, policy makers, and societies.

  15. Modifications of Morphometrical and Physiological Parameters of Pepper Plants Grown on Artificial Nutrient Medium for Experiments in Spaceflight

    NASA Astrophysics Data System (ADS)

    Nechitailo, Galina S.

    2016-07-01

    MODIFICATIONS OF MORPHOMETRICAL AND PHYSIOLOGICAL PARAMETERS OF PEPPER PLANTS GROWN ON ARTIFICIAL NUTRIENT MEDIUM FOR EXPERIMENTS IN SPACEFLIGHT Lui Min*, Zhao Hui*, Chen Yu*, Lu Jinying*, Li Huasheng*, Sun Qiao*, Nechitajlo G.S.**, Glushchenko N.N.*** *Shenzhou Space Biotechnology Group, China Academy of Space Technology (CAST), **Emanuel Institute of Biochemical Physics of Russian Academy of Sciences (IBCP RAS) mail: spacemal@mail.ru ***V.L. Talrose Institute for Energy Problems of Chemical Physics of Russian Academy of Science (INEPCP RAS) mail: nnglu@ mail.ru In circumstances of space flights, long residence of the staff at space stations and space settlements an optimal engineering system of the life-support allowing to solve a number of technical and psychological problems for successful work and a life of cosmonauts, researchers, etc. is important and prime. In this respect it is necessary to consider growing plants on board of spacecraft as one of the units in a life-support system. It is feasible due to modern development of biotechnologies in growing plants allowing us to receive materials with new improved properties. Thus, a composition and ratio of components of nutrient medium can considerably influence on plants properties. We have developed the nutrient medium in which essential metals such as iron, zinc, copper were added in an electroneutral state in the form of nanoparticles instead of sulfates or other salts of the same metals. Such replacement is appropriate through unique nanoparticles properties: metal nanoparticles are less toxic than their corresponding ionic forms; nanoparticles produce a prolonged effect, serving as a depot for elements in an organism; nanoparticles introduced in biotic doses stimulate the metabolic processes of the organism; nanoparticles effect is multifunctional. Pepper strain LJ-king was used for growing on a nutrient medium with ferrous, zinc, copper nanoparticles in different concentrations. Pepper plants grown on the nutrient medium with metal nanoparticles showed good morphometrical and physiological parameters: seedlings and plants were compact with the developed and active root system.

  16. Genetic parameters for milk fatty acids, milk yield and quality traits of a Holstein cattle population reared under tropical conditions

    USDA-ARS?s Scientific Manuscript database

    Information about genetic parameters is essential for selection decisions and genetic evaluation. Those estimates are population specific, but few studies are available for dairy cattle populations reared under tropical and subtropical conditions. Heritability and genetic correlations for milk yield...

  17. Real-time monitoring of peanut drying parameters in semitrailers

    USDA-ARS?s Scientific Manuscript database

    Knowledge of peanut drying parameters such as temperature and relative humidity of the ambient air, temperature and relative humidity of the air being blown into the peanuts and kernel moisture content is essential in managing the dryer for optimal drying rate. The optimal drying rate is required to...

  18. Theoretical analysis of single molecule spectroscopy lineshapes of conjugated polymers

    NASA Astrophysics Data System (ADS)

    Devi, Murali

    Conjugated Polymers(CPs) exhibit a wide range of highly tunable optical properties. Quantitative and detailed understanding of the nature of excitons responsible for such a rich optical behavior has significant implications for better utilization of CPs for more efficient plastic solar cells and other novel optoelectronic devices. In general, samples of CPs are plagued with substantial inhomogeneous broadening due to various sources of disorder. Single molecule emission spectroscopy (SMES) offers a unique opportunity to investigate the energetics and dynamics of excitons and their interactions with phonon modes. The major subject of the present thesis is to analyze and understand room temperature SMES lineshapes for a particular CP, called poly(2,5-di-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (DEH-PPV). A minimal quantum mechanical model of a two-level system coupled to a Brownian oscillator bath is utilized. The main objective is to identify the set of model parameters best fitting a SMES lineshape for each of about 200 samples of DEH-PPV, from which new insight into the nature of exciton-bath coupling can be gained. This project also entails developing a reliable computational methodology for quantum mechanical modeling of spectral lineshapes in general. Well-known optimization techniques such as gradient descent, genetic algorithms, and heuristic searches have been tested, employing an L2 measure between theoretical and experimental lineshapes for guiding the optimization. However, all of these tend to result in theoretical lineshapes qualitatively different from experimental ones. This is attributed to the ruggedness of the parameter space and inadequateness of the L2 measure. On the other hand, when the dynamic reduction of the original parameter space to a 2-parameter space through feature searching and visualization of the search space paths using directed acyclic graphs(DAGs), the qualitative nature of the fitting improved significantly. For a more satisfactory fitting, it is shown that the inclusion of an additional energetic disorder is essential, representing the effect of quasi-static disorder accumulated during the SMES of each polymer. Various technical details, ambiguous issues, and implication of the present work are discussed.

  19. Terminology supported archiving and publication of environmental science data in PANGAEA.

    PubMed

    Diepenbroek, Michael; Schindler, Uwe; Huber, Robert; Pesant, Stéphane; Stocker, Markus; Felden, Janine; Buss, Melanie; Weinrebe, Matthias

    2017-11-10

    Exemplified on the information system PANGAEA, we describe the application of terminologies for archiving and publishing environmental science data. A terminology catalogue (TC) was embedded into the system, with interfaces allowing to replicate and to manually work on terminologies. For data ingest and archiving, we show how the TC can improve structuring and harmonizing lineage and content descriptions of data sets. Key is the conceptualization of measurement and observation types (parameters) and methods, for which we have implemented a basic syntax and rule set. For data access and dissemination, we have improved findability of data through enrichment of metadata with TC terms. Semantic annotations, e.g. adding term concepts (including synonyms and hierarchies) or mapped terms of different terminologies, facilitate comprehensive data retrievals. The PANGAEA thesaurus of classifying terms, which is part of the TC is used as an umbrella vocabulary that links the various domains and allows drill downs and side drills with various facets. Furthermore, we describe how TC terms can be linked to nominal data values. This improves data harmonization and facilitates structural transformation of heterogeneous data sets to a common schema. Technical developments are complemented by work on the metadata content. Over the last 20 years, more than 100 new parameters have been defined on average per week. Recently, PANGAEA has increasingly been submitting new terms to various terminology services. Matching terms from terminology services with our parameter or method strings is supported programmatically. However, the process ultimately needs manual input by domain experts. The quality of terminology services is an additional limiting factor, and varies with respect to content, editorial, interoperability, and sustainability. Good quality terminology services are the building blocks for the conceptualization of parameters and methods. In our view, they are essential for data interoperability and arguably the most difficult hurdle for data integration. In summary, the application of terminologies has a mutual positive effect for terminology services and information systems such as PANGAEA. On both sides, the application of terminologies improves content, reliability and interoperability. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  20. Portal Vein Embolization as an Oncosurgical Strategy Prior to Major Hepatic Resection: Anatomic, Surgical, and Technical Considerations

    PubMed Central

    Orcutt, Sonia T.; Kobayashi, Katsuhiro; Sultenfuss, Mark; Hailey, Brian S.; Sparks, Anthony; Satpathy, Bighnesh; Anaya, Daniel A.

    2016-01-01

    Preoperative portal vein embolization (PVE) is used to extend the indications for major hepatic resection, and it has become the standard of care for selected patients with hepatic malignancies treated at major hepatobiliary centers. To date, various techniques with different embolic materials have been used with similar results in the degree of liver hypertrophy. Regardless of the specific strategy used, both surgeons and interventional radiologists must be familiar with each other’s techniques to be able to create the optimal plan for each individual patient. Knowledge of the segmental anatomy of the liver is paramount to fully understand the liver segments that need to be embolized and resected. Understanding the portal vein anatomy and the branching variations, along with the techniques used to transect the portal vein during hepatic resection, is important because these variables can affect the PVE procedure and the eventual surgical resection. Comprehension of the advantages and disadvantages of approaches to the portal venous system and the various embolic materials used for PVE is essential to best tailor the procedures for each patient and to avoid complications. Before PVE, meticulous assessment of the portal vein branching anatomy is performed with cross-sectional imaging, and embolization strategies are developed based on the patient’s anatomy. The PVE procedure consists of several technical steps, and knowledge of these technical tips, potential complications, and how to avoid the complications in each step is of great importance for safe and successful PVE and ultimately successful hepatectomy. Because PVE is used as an adjunct to planned hepatic resection, priority must always be placed on safety, without compromising the integrity of the future liver remnant, and close collaboration between interventional radiologists and hepatobiliary surgeons is essential to achieve successful outcomes. PMID:27014696

  1. Survey of aircraft icing simulation test facilities in North America

    NASA Technical Reports Server (NTRS)

    Olsen, W.

    1981-01-01

    A survey was made of the aircraft icing simulation facilities in North America: there are 12 wind tunnels, 28 engine test facilities, 6 aircraft tankers and 14 low velocity facilities, that perform aircraft icing tests full or part time. The location and size of the facility, its speed and temperature range, icing cloud parameters, and the technical person to contact are surveyed. Results are presented in tabular form. The capabilities of each facility were estimated by its technical contact person. The adequacy of these facilities for various types of icing tests is discussed.

  2. New Quality Standards of Testing Idlers for Highly Effective Belt Conveyors

    NASA Astrophysics Data System (ADS)

    Król, Robert; Gladysiewicz, Lech; Kaszuba, Damian; Kisielewski, Waldemar

    2017-12-01

    The paper presents result of research and analyses carried out into the belt conveyors idlers’ rotational resistance which is one of the key factor indicating the quality of idlers. Moreover, idlers’ rotational resistance is important factor in total resistance to motion of belt conveyor. The evaluation of the technical condition of belt conveyor idlers is carried out in accordance with actual national and international standards which determine the methodology of measurements and acceptable values of measured idlers’ parameters. Requirements defined by the standards, which determine the suitability of idlers to a specific application, despite the development of knowledge on idlers and quality of presently manufactured idlers maintain the same level of parameters values over long periods of time. Nowadays the need to implement new, efficient and economically justified solution for belt conveyor transportation systems characterized by long routes and energy-efficiency is often discussed as one of goals in belt conveyors’ future. One of the basic conditions for achieving this goal is to use only carefully selected idlers with low rotational resistance under the full range of operational loads and high durability. Due to this it is necessary to develop new guidelines for evaluation of the technical condition of belt conveyor idlers in accordance with actual standards and perfecting of existing and development of new methods of idlers testing. The changes in particular should concern updating of values of parameters used for evaluation of the technical condition of belt conveyor idlers in relation to belt conveyors’ operational challenges and growing demands in terms of belt conveyors’ energy efficiency.

  3. Effects of modifying the World Health Organization standard operating procedures for malaria microscopy to improve surveillance in resource poor settings.

    PubMed

    Fernando, Sumadhya D; Ihalamulla, Ratnasiri L; Wickremasinghe, Renu; de Silva, Nipun L; Thilakarathne, Janani H; Wijeyaratne, Pandu; Premaratne, Risintha G

    2014-03-15

    Individuals with fever are screened for malaria in specially-established malaria diagnostic laboratories set up in rural hospitals in the Northern and Eastern Provinces of Sri Lanka. Large numbers of blood smears negative for malaria parasites are being screened daily. Good quality smears are essential to maintain a high diagnostic competency among the technical staff. The modifications made to the World Health Organization (WHO) standard operating procedures to improve the quality of smears have been studied. A blinded, controlled, interventional study was conducted in 22 intervention and 21 control malaria diagnostic laboratories. Changes were made to the WHO standard operating procedure protocols to prepare, stain and examine blood smears for malaria parasite detection which were implemented in intervention laboratories. These included wipe-cleaning slides, preparing both thick and thin smears on the same slide, reversing the order of collecting blood for thick and thin smears, dry fixing thick smear for 20-25 minutes under table lamp, polishing the edge of spreader slide with sand paper and fixing the thin smear with methanol if not stained within four hours. Parameters with respect to quality of the smear as per WHO criteria were studied using randomly selected slides, and time taken for the report to be issued was recorded in both groups before and after the intervention. There were no significant differences observed in the parameters studied at baseline between the two groups or pre and post intervention in the control group. In the intervention group streak formation in thin smears was reduced from 29.4% to 5.0%. The average fixing time of thick smears was reduced from 2.4 hours to 20 minutes. Inappropriate thickness of thick smears reduced from 18.3% to 1.5%. Overall quality of thick smears and thin smears increased from 76.1% to 98.0% and 81.7% to 87.0%, respectively. The quality of slides bearing both thick and thin smears increased from 60.0% to 87.0%. New protocols with amendments to the WHO standard technical procedures ensure that good quality blood smears are prepared rapidly to diagnose malaria and the time required to issue the reports was reduced.

  4. An Inversion Method for Reconstructing Hall Thruster Plume Parameters from the Line Integrated Measurements (Preprint)

    DTIC Science & Technology

    2007-06-05

    From - To) 05-06-2007 Technical Paper 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER An Inversion Method for Reconstructing Hall Thruster Plume...239.18 An Inversion Method for Reconstructing Hall Thruster Plume Parameters from Line Integrated Measurements (Preprint) Taylor S. Matlock∗ Jackson...dimensional estimate of the plume electron temperature using a published xenon collisional radiative model. I. Introduction The Hall thruster is a high

  5. Complex assessment of urban housing energy sustainability

    NASA Astrophysics Data System (ADS)

    Popova, Olga; Glebova, Julia; Karakozova, Irina

    2018-03-01

    The article presents the results of a complex experimental-analytical research of residential development energy parameters - survey of construction sites and determination of calculated energy parameters (resistance to heat transfer) considering their technical condition. The authors suggest a methodology for assessing residential development energy parameters on the basis of construction project's structural analysis with the use of advanced intelligent collection systems, processing (self-organizing maps - SOM) and data visualization (geo-informational systems - GIS). SOM clustering permitted to divide the housing stock (on the example of Arkhangelsk city) into groups with similar technical-operational and energy parameters. It is also possible to measure energy parameters of construction project of each cluster by comparing them with reference (normative) measures and also with each other. The authors propose mechanisms for increasing the area's energy stability level by implementing a set of reproduction activities for residential development of various groups. The analysis showed that modern multilevel and high-rise construction buildings have the least heat losses. At present, however, ow-rise wood buildings is the dominant styles of buildings of Arkhangelsk city. Data visualisation on the created heat map showed that such housing stock covers the largest urban area. The development strategies for depressed areas is in a high-rise building, which show the economic, social and environmental benefits of upward growth of the city. An urban regeneration programme for severely rundown urban housing estates is in a high-rise construction building, which show the economic, social and environmental benefits of upward growth of the city.

  6. A New Direction for China’s Defense Industry

    DTIC Science & Technology

    2005-01-01

    behave like government ministries.31 In the reform of civilian ministries in China, the depth of such reorganizations could typically be seen via...of self-reliance in defense production, importing foreign technology is seen as essential to ena- bling China eventually to achieve independence in...goal is seen as involving the importation of technology and technical expertise for the production of state-of-the-art military equipment. As

  7. Technical and Regulatory Guidance for In Situ Chemical Oxidation of Contaminated Soil and Groundwater Second Edition

    DTIC Science & Technology

    2005-01-01

    PA Ozone (full scale) Silty sand underlain by fractured schist and shale Petroleum hydrocarbons Former Wood Treatment Site, Sonoma County , CA...Wood Treatment Site, Sonoma County , California Contaminant: Pentachlorophenol and creosote (i.e., PAHs) Oxidant: Ozone Regulatory Agency Contact...topography is essentially flat and paved, and the facility is located on northern Sonoma County , California. The site subsurface consists of very

  8. Local Anesthetics: Review of Pharmacological Considerations

    PubMed Central

    Becker, Daniel E; Reed, Kenneth L

    2012-01-01

    Local anesthetics have an impressive history of efficacy and safety in medical and dental practice. Their use is so routine, and adverse effects are so infrequent, that providers may understandably overlook many of their pharmacotherapeutic principles. The purpose of this continuing education article is to provide a review and update of essential pharmacology for the various local anesthetic formulations in current use. Technical considerations will be addressed in a subsequent article. PMID:22822998

  9. Close Air Support versus Close Combat Attack

    DTIC Science & Technology

    2012-12-06

    levels, little Army representation in the Joint Operations Center (JOC), a lack of proper equipment and training and fluid situations made centrally...Symbols are the most fluid of the parts, able to be shaped and changed as time proceeds and are therefore placed on the outside of the onion peel...rituals as “collective activities that are technically superfluous to reach desired ends but that, within a culture, are considered socially essential

  10. Science and Engineering Library and Information Service Development in Support of Research and Development in Indonesia; Report to the Chairman of the Indonesian Institute of Sciences (LIPI).

    ERIC Educational Resources Information Center

    Shank, Russell

    Access to scientific and technical information is essential to the conduct of high quality research and development work. Indonesia's scientists and engineers in Government research institutes are generally not being well-served by their own libraries. The most serious deficiencies are: (1) inadequately trained library staffs, (2) lack of…

  11. Improving CTE Student Retention and Transfer at Rend Lake College with Degree Audit and Reengagment Strategies. Pathways to Results: Implementation Partnerships Strategy Brief

    ERIC Educational Resources Information Center

    Rockey, Marci

    2016-01-01

    Rend Lake College (RLC) has participated in several Pathways to Results (PTR) projects over the last five years. The PTR model has been an essential tool to drive evidence-based changes throughout the College. In 2015, RLC used the PTR Model to evaluate institutional processes related to the Perkins Career and Technical Education (CTE) Student…

  12. AN EIGHT WEEK SEMINAR IN AN INTRODUCTION TO NUMERICAL CONTROL ON TWO- AND THREE-AXIS MACHINE TOOLS FOR VOCATIONAL AND TECHNICAL MACHINE TOOL INSTRUCTORS. FINAL REPORT.

    ERIC Educational Resources Information Center

    BOLDT, MILTON; POKORNY, HARRY

    THIRTY-THREE MACHINE SHOP INSTRUCTORS FROM 17 STATES PARTICIPATED IN AN 8-WEEK SEMINAR TO DEVELOP THE SKILLS AND KNOWLEDGE ESSENTIAL FOR TEACHING THE OPERATION OF NUMERICALLY CONTROLLED MACHINE TOOLS. THE SEMINAR WAS GIVEN FROM JUNE 20 TO AUGUST 12, 1966, WITH COLLEGE CREDIT AVAILABLE THROUGH STOUT STATE UNIVERSITY. THE PARTICIPANTS COMPLETED AN…

  13. Sector Education and Training Authority for Secondary Argiculture (SETASA), Small, Micro and Medium Enterprises (SMME) and Adult Basic Education and Training (ABET) Final Report October 2004

    ERIC Educational Resources Information Center

    Academy for Educational Development, 2004

    2004-01-01

    This document reports on a programme of technical assistance for the Sector Education and Training Authority for Secondary Agriculture (SETASA) in 2003/2004. It presents background information which is both essential for understanding the rest of the report, including its attachments, and can be seen as reflecting some of the insights gained…

  14. Technical note: Open-paleo-data implementation pilot - the PAGES 2k special issue

    NASA Astrophysics Data System (ADS)

    Kaufman, Darrell S.; Pages 2k Special-Issue Editorial Team

    2018-05-01

    Data stewardship is an essential element of the publication process. Knowing how to enact data polices that are described only in general terms can be difficult, however. Examples are needed to model the implementation of open-data polices in actual studies. Here we explain the procedure used to attain a high and consistent level of data stewardship across a special issue of the journal Climate of the Past. We discuss the challenges related to (1) determining which data are essential for public archival, (2) using data generated by others, and (3) understanding data citations. We anticipate that open-data sharing in paleo sciences will accelerate as the advantages become more evident and as practices that reduce data loss become the accepted convention.

  15. 47 CFR 22.409 - Developmental authorization for a new Public Mobile Service or technology.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... listing of any patents applied for, including copies of any patents issued; (4) Copies of any marketing... on each channel or frequency range and the technical parameters of such transmissions; and, (ii) Any...

  16. The Shock and Vibration Digest. Volume 13, Number 5

    DTIC Science & Technology

    1981-05-01

    Ducts................ 82 Numerical Methods..107 VEHICLE SYSTEMS ........ 51 Building Components..85 Parameter Identification. . 107 Groud Veicls ...in Hybrid Systems Beam Vibrations W. Wed ig 68 Inst. for Technical Mechanics, Univ. of Karlsruhe, CYLINDERS Recent Advances in Structural Dynamics

  17. Technical skills rotation for general surgery residents.

    PubMed

    Gonzalez, Ray I; Martinez, Jose M; Iglesias, Alberto R; Lo Menzo, Emanuele; Hutson, Duane; Sleeman, Danny; Livingstone, Alan S; Madan, Atul K

    2010-06-15

    Technical skills are an important part of any general surgery residency curriculum. With the demands of limited work weeks, it is imperative that educators create novel methods of teaching technical skills to their residents. Our program utilizes a dedicated month to help accomplish this. This study hypothesized that general surgery residents would report a positive effect of a dedicated technical skills rotation. Residents who had undergone a 1 mo rotation in technical skills during their first year were asked to fill out a survey concerning their experience. During the 1-mo rotation, the residents had almost no clinical responsibilities. Teaching of technical skills was performed with various activities, including video content (VC), virtual reality simulators (VR), open foam procedures (OF), laparoscopic box trainers (BT), surgical equipment in-service (SE), and animate sessions (AS). Responses were given on a Likert scale (1-10) with higher numbers being more positive responses. There were seven residents in this study. The residents gave a very positive response to the overall rotation (9.4) and exposure to laparoscopic procedures (9.6). The other responses were enthusiastic as well: exposure to open procedures (8.9) and preparation for operative room (9.4). After their rotation, the residents were comfortable performing a laparoscopic cholecystectomy (9.2), a hand-sewn anastomosis (8.7), and a stapled anastomosis (9.4). The residents found theses activities helpful in increasing order: VC (7.8), VR (8.0), BT (9.0), ES (9.7), OF (9.8), and AS (9.8). A 1-mo dedicated technical skills rotations was perceived to be extremely positive by the residents. The residents felt very comfortable performing a laparoscopic cholecystectomy, a hand-sewn anastomosis, and a stapled anastomosis. With the 80-h work week, alternatives to learning technical skills in the operating room are essential. Further studies need to be performed to determine if this rotation aids in accomplishing this goal. Copyright 2010. Published by Elsevier Inc.

  18. Sphere-Enhanced Microwave Ablation (sMWA) Versus Bland Microwave Ablation (bMWA): Technical Parameters, Specific CT 3D Rendering and Histopathology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gockner, T. L., E-mail: theresa.gockner@med.uni-heidelberg.de; Zelzer, S., E-mail: s.zelzer@dkfz-heidelberg.de; Mokry, T., E-mail: theresa.mokry@med.uni-heidelberg.de

    PurposeThis study was designed to compare technical parameters during ablation as well as CT 3D rendering and histopathology of the ablation zone between sphere-enhanced microwave ablation (sMWA) and bland microwave ablation (bMWA).MethodsIn six sheep-livers, 18 microwave ablations were performed with identical system presets (power output: 80 W, ablation time: 120 s). In three sheep, transarterial embolisation (TAE) was performed immediately before microwave ablation using spheres (diameter: 40 ± 10 μm) (sMWA). In the other three sheep, microwave ablation was performed without spheres embolisation (bMWA). Contrast-enhanced CT, sacrifice, and liver harvest followed immediately after microwave ablation. Study goals included technical parameters during ablation (resulting power output,more » ablation time), geometry of the ablation zone applying specific CT 3D rendering with a software prototype (short axis of the ablation zone, volume of the largest aligned ablation sphere within the ablation zone), and histopathology (hematoxylin-eosin, Masson Goldner and TUNEL).ResultsResulting power output/ablation times were 78.7 ± 1.0 W/120 ± 0.0 s for bMWA and 78.4 ± 1.0 W/120 ± 0.0 s for sMWA (n.s., respectively). Short axis/volume were 23.7 ± 3.7 mm/7.0 ± 2.4 cm{sup 3} for bMWA and 29.1 ± 3.4 mm/11.5 ± 3.9 cm{sup 3} for sMWA (P < 0.01, respectively). Histopathology confirmed the signs of coagulation necrosis as well as early and irreversible cell death for bMWA and sMWA. For sMWA, spheres were detected within, at the rim, and outside of the ablation zone without conspicuous features.ConclusionsSpecific CT 3D rendering identifies a larger ablation zone for sMWA compared with bMWA. The histopathological signs and the detectable amount of cell death are comparable for both groups. When comparing sMWA with bMWA, TAE has no effect on the technical parameters during ablation.« less

  19. 1996 NASA-ASEE-Stanford Summer Faculty Fellowship Program. Part 1

    NASA Technical Reports Server (NTRS)

    1996-01-01

    As is customary, the final technical report for the NASA-ASEE Summer Faculty Fellowship Program at the Ames Research Center, Dryden Flight Research Center and Stanford University essentially consists of a compilation of the summary technical reports of all the fellows. More extended versions done either as NASA publications, archival papers, or other laboratory reports are not included here. The reader will note that the areas receiving emphasis were the life sciences, astronomy, remote sensing, aeronautics, fluid dynamics/aerophysics, and computer science. Of course, the areas of emphasis vary somewhat from year to year depending on the interests of the most qualified applicants. Once again, the work is of especially high quality. The reports of the first and second year fellows are grouped separately and are arranged alphabetically within each group.

  20. Standard for Models and Simulations

    NASA Technical Reports Server (NTRS)

    Steele, Martin J.

    2016-01-01

    This NASA Technical Standard establishes uniform practices in modeling and simulation to ensure essential requirements are applied to the design, development, and use of models and simulations (MS), while ensuring acceptance criteria are defined by the program project and approved by the responsible Technical Authority. It also provides an approved set of requirements, recommendations, and criteria with which MS may be developed, accepted, and used in support of NASA activities. As the MS disciplines employed and application areas involved are broad, the common aspects of MS across all NASA activities are addressed. The discipline-specific details of a given MS should be obtained from relevant recommended practices. The primary purpose is to reduce the risks associated with MS-influenced decisions by ensuring the complete communication of the credibility of MS results.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top