Sample records for establish operating limits

  1. 40 CFR 63.7323 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... operating limit according to the procedures in paragraphs (c)(1), (2), or (3) of this section. (1) If you... establish a site-specific operating limit for pressure drop according to the procedures in paragraphs (d)(1... § 63.7290(a). (3) Establish revised operating limits according to the applicable procedures in...

  2. 40 CFR 63.7323 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... operating limit according to the procedures in paragraphs (c)(1), (2), or (3) of this section. (1) If you... establish a site-specific operating limit for pressure drop according to the procedures in paragraphs (d)(1... § 63.7290(a). (3) Establish revised operating limits according to the applicable procedures in...

  3. 40 CFR 63.7323 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... operating limit according to the procedures in paragraphs (c)(1), (2), or (3) of this section. (1) If you... establish a site-specific operating limit for pressure drop according to the procedures in paragraphs (d)(1... § 63.7290(a). (3) Establish revised operating limits according to the applicable procedures in...

  4. 40 CFR 63.7323 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... operating limit according to the procedures in paragraphs (c)(1), (2), or (3) of this section. (1) If you... establish a site-specific operating limit for pressure drop according to the procedures in paragraphs (d)(1... § 63.7290(a). (3) Establish revised operating limits according to the applicable procedures in...

  5. 40 CFR 63.3967 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.3967 Section 63... establish the emission capture system and add-on control device operating limits during the performance test... must establish the operating limits required by § 63.3892 according to this section, unless you have...

  6. 40 CFR 63.3967 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.3967 Section 63... establish the emission capture system and add-on control device operating limits during the performance test... must establish the operating limits required by § 63.3892 according to this section, unless you have...

  7. 40 CFR 63.3167 - How do I establish the add-on control device operating limits during the performance test?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... device operating limits during the performance test? 63.3167 Section 63.3167 Protection of Environment... Limitations § 63.3167 How do I establish the add-on control device operating limits during the performance.... (a) Thermal oxidizers. If your add-on control device is a thermal oxidizer, establish the operating...

  8. 40 CFR 63.7733 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Foundries Initial Compliance Requirements § 63.7733 What procedures must I use to establish operating limits... site-specific operating limits in your operation and maintenance plan according to the procedures in... site-specific operating limit according to the procedures specified in paragraphs (c)(1) and (2) of...

  9. 40 CFR 63.7733 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Initial Compliance Requirements § 63.7733 What procedures must I use to establish operating limits? (a...-specific operating limits in your operation and maintenance plan according to the procedures in paragraphs... site-specific operating limit according to the procedures specified in paragraphs (c)(1) and (2) of...

  10. 40 CFR 63.7733 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Foundries Initial Compliance Requirements § 63.7733 What procedures must I use to establish operating limits... site-specific operating limits in your operation and maintenance plan according to the procedures in... site-specific operating limit according to the procedures specified in paragraphs (c)(1) and (2) of...

  11. 40 CFR 63.7733 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Foundries Initial Compliance Requirements § 63.7733 What procedures must I use to establish operating limits... site-specific operating limits in your operation and maintenance plan according to the procedures in... site-specific operating limit according to the procedures specified in paragraphs (c)(1) and (2) of...

  12. 14 CFR 25.1521 - Powerplant limitations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... operation due to the design of the installation or to another established limitation. (c) Turbine engine installations. Operating limitations relating to the following must be established for turbine engine... section must be established so that they do not exceed the corresponding limits for which the engines or...

  13. 14 CFR 25.1521 - Powerplant limitations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... operation due to the design of the installation or to another established limitation. (c) Turbine engine installations. Operating limitations relating to the following must be established for turbine engine... section must be established so that they do not exceed the corresponding limits for which the engines or...

  14. 14 CFR 25.1521 - Powerplant limitations.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... operation due to the design of the installation or to another established limitation. (c) Turbine engine installations. Operating limitations relating to the following must be established for turbine engine... section must be established so that they do not exceed the corresponding limits for which the engines or...

  15. 14 CFR 25.1521 - Powerplant limitations.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... operation due to the design of the installation or to another established limitation. (c) Turbine engine installations. Operating limitations relating to the following must be established for turbine engine... section must be established so that they do not exceed the corresponding limits for which the engines or...

  16. 40 CFR 63.7323 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to the procedures in paragraphs (c)(1), (2), or (3) of this section. (1) If you elect the operating...-specific operating limit for pressure drop according to the procedures in paragraphs (d)(1) and (2) of this... § 63.7290(a). (3) Establish revised operating limits according to the applicable procedures in...

  17. 40 CFR 63.9324 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.9324 Section 63... Requirements § 63.9324 How do I establish the emission capture system and add-on control device operating... the operating limits required by § 63.9302 according to this section, unless you have received...

  18. 40 CFR 63.9324 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.9324 Section 63... Requirements § 63.9324 How do I establish the emission capture system and add-on control device operating... the operating limits required by § 63.9302 according to this section, unless you have received...

  19. 40 CFR 63.9324 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.9324 Section 63... Requirements § 63.9324 How do I establish the emission capture system and add-on control device operating... the operating limits required by § 63.9302 according to this section, unless you have received...

  20. 40 CFR 63.9324 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.9324 Section 63... Requirements § 63.9324 How do I establish the emission capture system and add-on control device operating... the operating limits required by § 63.9302 according to this section, unless you have received...

  1. 40 CFR 63.9324 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.9324 Section 63... Requirements § 63.9324 How do I establish the emission capture system and add-on control device operating... the operating limits required by § 63.9302 according to this section, unless you have received...

  2. 40 CFR 63.9622 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-specific operating limits according to the procedures in paragraphs (a)(1) through (3) of this section. (1... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this... site-specific operating limit according to the procedures in paragraphs (c)(1) or (2) of this section...

  3. 40 CFR 63.9622 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-specific operating limits according to the procedures in paragraphs (a)(1) through (3) of this section. (1... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this... site-specific operating limit according to the procedures in paragraphs (c)(1) or (2) of this section...

  4. 40 CFR 63.9622 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-specific operating limits according to the procedures in paragraphs (a)(1) through (3) of this section. (1... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this... site-specific operating limit according to the procedures in paragraphs (c)(1) or (2) of this section...

  5. 40 CFR 63.9622 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-specific operating limits according to the procedures in paragraphs (a)(1) through (3) of this section. (1... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this... site-specific operating limit according to the procedures in paragraphs (c)(1) or (2) of this section...

  6. 40 CFR 63.9622 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-specific operating limits according to the procedures in paragraphs (a)(1) through (3) of this section. (1... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this... site-specific operating limit according to the procedures in paragraphs (c)(1) or (2) of this section...

  7. 40 CFR 63.4167 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.4167 Section 63.4167... Emission Rate with Add-on Controls Option § 63.4167 How do I establish the emission capture system and add-on control device operating limits during the performance test? During the performance test required...

  8. 40 CFR Table 6 to Subpart Jjjjjj... - Establishing Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Dry sorbent or activated carbon injection rate operating parameters Establish a site-specific minimum sorbent or activated carbon injection rate operating limit according to § 63.11211(b) Data from the sorbent or activated carbon injection rate monitors and the mercury performance stack tests (a) You must...

  9. 40 CFR Table 6 to Subpart Jjjjjj... - Establishing Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Dry sorbent or activated carbon injection rate operating parameters Establish a site-specific minimum sorbent or activated carbon injection rate operating limit according to § 63.11211(b) Data from the sorbent or activated carbon injection rate monitors and the mercury performance stack tests (a) You must...

  10. 40 CFR Table 7 to Subpart Uuu of... - Continuous Compliance With Operating Limits for Metal HAP Emissions From Catalytic Cracking Units

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-gas ratio above the limit established during the performance test. 4. Option 3: Ni lb/hr not subject to the NSPS for PM in 40 CFR 60.102. a. Continuous opacity monitoring system. The daily average Ni operating value must not exceed the site-specific Ni operating limit established during the performance test...

  11. 40 CFR Table 7 to Subpart Uuu of... - Continuous Compliance With Operating Limits for Metal HAP Emissions From Catalytic Cracking Units

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-gas ratio above the limit established during the performance test. 4. Option 3: Ni lb/hr not subject to the NSPS for PM in 40 CFR 60.102. a. Continuous opacity monitoring system. The daily average Ni operating value must not exceed the site-specific Ni operating limit established during the performance test...

  12. 40 CFR 63.9916 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compliance with the operating limits? For a wet scrubber subject to operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you must establish site-specific operating limits according to... monitoring system (CPMS) required in § 63.9920, measure and record the pressure drop and scrubber water flow...

  13. 40 CFR 63.9916 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compliance with the operating limits? For a wet scrubber subject to operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you must establish site-specific operating limits according to... monitoring system (CPMS) required in § 63.9920, measure and record the pressure drop and scrubber water flow...

  14. 40 CFR 63.9916 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... compliance with the operating limits? For a wet scrubber subject to operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you must establish site-specific operating limits according to... monitoring system (CPMS) required in § 63.9920, measure and record the pressure drop and scrubber water flow...

  15. 40 CFR 63.9916 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... compliance with the operating limits? For a wet scrubber subject to operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you must establish site-specific operating limits according to... monitoring system (CPMS) required in § 63.9920, measure and record the pressure drop and scrubber water flow...

  16. 40 CFR 63.9916 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... compliance with the operating limits? For a wet scrubber subject to operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you must establish site-specific operating limits according to... monitoring system (CPMS) required in § 63.9920, measure and record the pressure drop and scrubber water flow...

  17. 40 CFR 63.4767 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system and add-on control device operating limits during the performance test? 63.4767 Section 63.4767... Rate with Add-on Controls Option § 63.4767 How do I establish the emission capture system and add-on control device operating limits during the performance test? During the performance test required by § 63...

  18. 40 CFR 63.4966 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.4966 Section 63.4966... outlet gas temperature is the maximum operating limit for your condenser. (e) Emission capture system... Emission Rate with Add-on Controls Option § 63.4966 How do I establish the emission capture system and add...

  19. 40 CFR 63.4767 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system and add-on control device operating limits during the performance test? 63.4767 Section 63.4767... Rate with Add-on Controls Option § 63.4767 How do I establish the emission capture system and add-on control device operating limits during the performance test? During the performance test required by § 63...

  20. 40 CFR 63.4966 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system and add-on control device operating limits during the performance test? 63.4966 Section 63.4966... outlet gas temperature is the maximum operating limit for your condenser. (e) Emission capture system... with Add-on Controls Option § 63.4966 How do I establish the emission capture system and add-on control...

  1. 40 CFR 63.4966 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system and add-on control device operating limits during the performance test? 63.4966 Section 63.4966... outlet gas temperature is the maximum operating limit for your condenser. (e) Emission capture system... with Add-on Controls Option § 63.4966 How do I establish the emission capture system and add-on control...

  2. 40 CFR 63.4167 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system and add-on control device operating limits during the performance test? 63.4167 Section 63.4167... with Add-on Controls Option § 63.4167 How do I establish the emission capture system and add-on control device operating limits during the performance test? During the performance test required by § 63.4160...

  3. 40 CFR 63.4167 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system and add-on control device operating limits during the performance test? 63.4167 Section 63.4167... with Add-on Controls Option § 63.4167 How do I establish the emission capture system and add-on control device operating limits during the performance test? During the performance test required by § 63.4160...

  4. 40 CFR Table 2 to Subpart Uuu of... - Operating Limits for Metal HAP Emissions From Catalytic Cracking Units

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... daily average liquid-to-gas ratio above the limit established in the performance test. 4. Option 3: Ni.... Electrostatic precipitator Maintain the daily average Ni operating value no higher than the limit established...; maintain the monthly rolling average of the equilibrium catalyst Ni concentration no higher than the limit...

  5. 40 CFR Table 2 to Subpart Uuu of... - Operating Limits for Metal HAP Emissions From Catalytic Cracking Units

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... daily average liquid-to-gas ratio above the limit established in the performance test. 4. Option 3: Ni.... Electrostatic precipitator Maintain the daily average Ni operating value no higher than the limit established...; maintain the monthly rolling average of the equilibrium catalyst Ni concentration no higher than the limit...

  6. 40 CFR 63.3556 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system and add-on control device operating limits during the performance test? 63.3556 Section 63.3556... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure.../outlet Concentration Option § 63.3556 How do I establish the emission capture system and add-on control...

  7. 40 CFR 63.3556 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system and add-on control device operating limits during the performance test? 63.3556 Section 63.3556... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure.../outlet Concentration Option § 63.3556 How do I establish the emission capture system and add-on control...

  8. 40 CFR 63.3556 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.3556 Section 63.3556... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure... Control Efficiency/outlet Concentration Option § 63.3556 How do I establish the emission capture system...

  9. 40 CFR Table 3 to Subpart Ddddd of... - Operating Limits for Boilers and Process Heaters With Mercury Emission Limits and Boilers and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... minimum pressure drop and liquid flow-rate at or above the operating levels established during the... leak detection system alarm does not sound more than 5 percent of the operating time during a 6-month... control Maintain the minimum sorbent or carbon injection rate at or above the operating levels established...

  10. 40 CFR Table 3 to Subpart Ddddd of... - Operating Limits for Boilers and Process Heaters With Mercury Emission Limits and Boilers and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... minimum pressure drop and liquid flow-rate at or above the operating levels established during the... leak detection system alarm does not sound more than 5 percent of the operating time during a 6-month... control Maintain the minimum sorbent or carbon injection rate at or above the operating levels established...

  11. 14 CFR 133.45 - Operating limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Operating limitations. 133.45 Section 133...-LOAD OPERATIONS Airworthiness Requirements § 133.45 Operating limitations. In addition to the operating... established in accordance with § 133.43(c). (b) The rotorcraft-load combination may not be operated with an...

  12. 14 CFR 35.5 - Propeller ratings and operating limitations.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Propeller ratings and operating limitations... AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS General § 35.5 Propeller ratings and operating limitations. (a) Propeller ratings and operating limitations must: (1) Be established by the applicant and approved by the...

  13. 14 CFR 35.5 - Propeller ratings and operating limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Propeller ratings and operating limitations... AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS General § 35.5 Propeller ratings and operating limitations. (a) Propeller ratings and operating limitations must: (1) Be established by the applicant and approved by the...

  14. 14 CFR 35.5 - Propeller ratings and operating limitations.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Propeller ratings and operating limitations... AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS General § 35.5 Propeller ratings and operating limitations. (a) Propeller ratings and operating limitations must: (1) Be established by the applicant and approved by the...

  15. 14 CFR 35.5 - Propeller ratings and operating limitations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Propeller ratings and operating limitations... AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS General § 35.5 Propeller ratings and operating limitations. (a) Propeller ratings and operating limitations must: (1) Be established by the applicant and approved by the...

  16. 14 CFR 35.5 - Propeller ratings and operating limitations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Propeller ratings and operating limitations... AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS General § 35.5 Propeller ratings and operating limitations. (a) Propeller ratings and operating limitations must: (1) Be established by the applicant and approved by the...

  17. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic... emission limits? If you use an air pollution control device other than a wet scrubber, fabric filter...

  18. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic... emission limits? If you use an air pollution control device other than a wet scrubber, fabric filter...

  19. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic... emission limits? If you use an air pollution control device other than a wet scrubber, fabric filter...

  20. 40 CFR 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon... I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic... emission limits? If you use an air pollution control device other than a wet scrubber, fabric filter...

  1. 40 CFR 63.7824 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this.... (3) Establish revised operating limits according to the applicable procedures in paragraphs (a) and... 40 Protection of Environment 14 2014-07-01 2014-07-01 false What test methods and other procedures...

  2. 40 CFR 63.7824 - What test methods and other procedures must I use to establish and demonstrate initial compliance...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... establish site-specific operating limits according to the procedures in paragraphs (b)(1) and (2) of this.... (3) Establish revised operating limits according to the applicable procedures in paragraphs (a) and... 40 Protection of Environment 14 2012-07-01 2011-07-01 true What test methods and other procedures...

  3. 40 CFR Table 2 to Subpart Sssss of... - Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... hour) at or below the maximum organic HAP processing rate established during the most recent... allowable operating temperature for the oxidizer established during the most recent performance test. 6... operating temperature for the oxidizer established during the most recent performance test; and b. Check the...

  4. 40 CFR Table 2 to Subpart Sssss of... - Operating Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... hour) at or below the maximum organic HAP processing rate established during the most recent... allowable operating temperature for the oxidizer established during the most recent performance test. 6... operating temperature for the oxidizer established during the most recent performance test; and b. Check the...

  5. 40 CFR Table 2 to Subpart Sssss of... - Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hour) at or below the maximum organic HAP processing rate established during the most recent... allowable operating temperature for the oxidizer established during the most recent performance test. 6... operating temperature for the oxidizer established during the most recent performance test; and b. Check the...

  6. 40 CFR 60.5190 - How do I establish my operating limits?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Times for Existing Sewage Sludge Incineration Units Model Rule-Initial Compliance Requirements § 60.5190..., and cadmium. (4) For an activated carbon injection system designed to control emissions of mercury, you are not required to establish an operating limit and monitor sorbent injection rate and carrier...

  7. 40 CFR 60.5190 - How do I establish my operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Times for Existing Sewage Sludge Incineration Units Model Rule-Initial Compliance Requirements § 60.5190..., and cadmium. (4) For an activated carbon injection system designed to control emissions of mercury, you are not required to establish an operating limit and monitor sorbent injection rate and carrier...

  8. 40 CFR 60.5190 - How do I establish my operating limits?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Times for Existing Sewage Sludge Incineration Units Model Rule-Initial Compliance Requirements § 60.5190..., and cadmium. (4) For an activated carbon injection system designed to control emissions of mercury, you are not required to establish an operating limit and monitor sorbent injection rate and carrier...

  9. 40 CFR 60.5190 - How do I establish my operating limits?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Times for Existing Sewage Sludge Incineration Units Model Rule-Initial Compliance Requirements § 60.5190..., and cadmium. (4) For an activated carbon injection system designed to control emissions of mercury, you are not required to establish an operating limit and monitor sorbent injection rate and carrier...

  10. 40 CFR Table 8 to Subpart Sssss of... - Continuous Compliance with Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... recent performance test; andii. Conducting annually an inspection of all duct work, vents, and capture... process operating parameters within the limits established during the most recent performance test i... processing rate at or below the maximum organic HAP processing rate established during the most recent...

  11. 40 CFR Table 8 to Subpart Sssss of... - Continuous Compliance with Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... recent performance test; andii. Conducting annually an inspection of all duct work, vents, and capture... process operating parameters within the limits established during the most recent performance test i... processing rate at or below the maximum organic HAP processing rate established during the most recent...

  12. 40 CFR Table 8 to Subpart Sssss of... - Continuous Compliance with Operating Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... recent performance test; andii. Conducting annually an inspection of all duct work, vents, and capture... process operating parameters within the limits established during the most recent performance test i... processing rate at or below the maximum organic HAP processing rate established during the most recent...

  13. 40 CFR 63.3546 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system and add-on control device operating limits during the performance test? 63.3546 Section 63.3546... device or system of multiple capture devices. The average duct static pressure is the maximum operating... Add-on Controls Option § 63.3546 How do I establish the emission capture system and add-on control...

  14. 40 CFR 63.3546 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system and add-on control device operating limits during the performance test? 63.3546 Section 63.3546... device or system of multiple capture devices. The average duct static pressure is the maximum operating... Add-on Controls Option § 63.3546 How do I establish the emission capture system and add-on control...

  15. 40 CFR 63.4966 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4966 Section 63... system and add-on control device operating limits during the performance test? During the performance... outlet gas temperature is the maximum operating limit for your condenser. (e) Emission capture system...

  16. 40 CFR 63.4966 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4966 Section 63... system and add-on control device operating limits during the performance test? During the performance... outlet gas temperature is the maximum operating limit for your condenser. (e) Emission capture system...

  17. 14 CFR 161.7 - Limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... operations, or limit the hours of Stage 2 or Stage 3 aircraft operations, at the airport. (b) The notice... November 5, 1990, where the amendment does not reduce or limit aircraft operations or affect aircraft... working group (outside of the process established by 14 CFR part 150) with a local airport operator to...

  18. 40 CFR 63.3556 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.3556 Section 63... system and add-on control device operating limits during the performance test? During the performance... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure...

  19. 40 CFR 63.3546 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.3546 Section 63.3546... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure... minimum operating limit for that specific capture device or system of multiple capture devices. The...

  20. 40 CFR 63.3546 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.3546 Section 63... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure... minimum operating limit for that specific capture device or system of multiple capture devices. The...

  1. 40 CFR 63.3546 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.3546 Section 63... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure... minimum operating limit for that specific capture device or system of multiple capture devices. The...

  2. 40 CFR 63.3556 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.3556 Section 63... system and add-on control device operating limits during the performance test? During the performance... of key parameters of the valve operating system (e.g., solenoid valve operation, air pressure...

  3. 40 CFR Table 5 to Subpart Mmmmm of... - Continuous Compliance With Emission Limits and Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... Each new or reconstructed flame lamination affected source using a scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performanceb. Maintain the daily average scrubber effluent pH within the operating range established during the...

  4. 40 CFR 63.4767 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.4767 Section 63.4767... system and add-on control device operating limits during the performance test? During the performance... operating limits required by § 63.4692 according to this section, unless you have received approval for...

  5. 40 CFR 63.3967 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system and add-on control device operating limits during the performance test? 63.3967 Section 63.3967... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.3892 according to this section, unless you have received...

  6. 40 CFR 63.3967 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... system and add-on control device operating limits during the performance test? 63.3967 Section 63.3967... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.3892 according to this section, unless you have received...

  7. 40 CFR 63.3967 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.3967 Section 63.3967... emission capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.3892 according to this section, unless you have received...

  8. 40 CFR 63.4167 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4167 Section 63... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4092 according to this section unless you have received approval...

  9. 40 CFR 63.4567 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4567 Section 63... emission capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4492 according to this section, unless you have received...

  10. 40 CFR 63.4167 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4167 Section 63... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4092 according to this section unless you have received approval...

  11. 40 CFR 63.4767 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4767 Section 63... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4692 according to this section, unless you have received...

  12. 40 CFR 63.4767 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4767 Section 63... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4692 according to this section, unless you have received...

  13. 40 CFR 63.4567 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... capture system and add-on control device operating limits during the performance test? 63.4567 Section 63... emission capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4492 according to this section, unless you have received...

  14. 40 CFR 63.4567 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system and add-on control device operating limits during the performance test? 63.4567 Section 63.4567... capture system and add-on control device operating limits during the performance test? During the... the operating limits required by § 63.4492 according to this section, unless you have received...

  15. 40 CFR Table 2 to Subpart III of... - Operating Limits for Wet Scrubbers

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Operating Limits for Wet Scrubbers 2... Part 62—Operating Limits for Wet Scrubbers For these operating parameters You must establish these... and intermittent units) a Pressure drop across the wet scrubber or amperage to wet scrubber Minimum...

  16. 40 CFR Table 2 to Subpart III of... - Operating Limits for Wet Scrubbers

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Operating Limits for Wet Scrubbers 2... Part 62—Operating Limits for Wet Scrubbers For these operating parameters You must establish these... and intermittent units) a Pressure drop across the wet scrubber or amperage to wet scrubber Minimum...

  17. 14 CFR 23.1527 - Maximum operating altitude.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating altitude. 23.1527 Section... Information § 23.1527 Maximum operating altitude. (a) The maximum altitude up to which operation is allowed... established. (b) A maximum operating altitude limitation of not more than 25,000 feet must be established for...

  18. 14 CFR 23.1507 - Operating maneuvering speed.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Operating maneuvering speed. 23.1507... Limitations and Information § 23.1507 Operating maneuvering speed. The maximum operating maneuvering speed, VO, must be established as an operating limitation. VO is a selected speed that is not greater than VS√n...

  19. 14 CFR 23.1507 - Operating maneuvering speed.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Operating maneuvering speed. 23.1507... Limitations and Information § 23.1507 Operating maneuvering speed. The maximum operating maneuvering speed, VO, must be established as an operating limitation. VO is a selected speed that is not greater than VS√n...

  20. 40 CFR 60.58c - Reporting and recordkeeping requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... limits and/or to establish or re-establish operating parameters, as applicable, and a description, including sample calculations, of how the operating parameters were established or re-established, if....epa.gov/ttn/chief/ert/ert_tool.html. [62 FR 48382, Sept. 15, 1997, as amended at 74 FR 51413, Oct. 6...

  1. 40 CFR 60.58c - Reporting and recordkeeping requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... limits and/or to establish or re-establish operating parameters, as applicable, and a description, including sample calculations, of how the operating parameters were established or re-established, if....epa.gov/ttn/chief/ert/ert_tool.html. [62 FR 48382, Sept. 15, 1997, as amended at 74 FR 51413, Oct. 6...

  2. 14 CFR 23.23 - Load distribution limits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... distribution limits. (a) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within... established for the corresponding weight and center of gravity combinations. (b) The load distribution limits...

  3. 14 CFR 23.23 - Load distribution limits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... distribution limits. (a) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within... established for the corresponding weight and center of gravity combinations. (b) The load distribution limits...

  4. 14 CFR 23.23 - Load distribution limits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... distribution limits. (a) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within... established for the corresponding weight and center of gravity combinations. (b) The load distribution limits...

  5. 14 CFR 23.23 - Load distribution limits.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... distribution limits. (a) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within... established for the corresponding weight and center of gravity combinations. (b) The load distribution limits...

  6. 14 CFR 23.23 - Load distribution limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... distribution limits. (a) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within... established for the corresponding weight and center of gravity combinations. (b) The load distribution limits...

  7. 40 CFR 63.6603 - What emission limitations and operating limitations must I meet if I own or operate an existing...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... emissions? Compliance with the numerical emission limitations established in this subpart is based on the... Alaska not accessible by the Federal Aid Highway System (FAHS) you do not have to meet the numerical CO...

  8. 75 FR 50936 - Loan Policies and Operations; Lending and Leasing Limits and Risk Management

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-18

    ...-AC60 Loan Policies and Operations; Lending and Leasing Limits and Risk Management AGENCY: Farm Credit... sound operation of System institutions by strengthening their risk management practices and abilities to... the establishment of consistent, uniform and prudent concentration risk management policies by System...

  9. 40 CFR 60.4870 - How do I establish my operating limits?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Sewage Sludge Incineration Units Initial Compliance Requirements § 60.4870 How do I establish my... compliance with the emission limit for particulate matter, cadmium, and lead. (4) For an activated carbon... limit and monitor sorbent injection rate and carrier gas flow rate (or carrier gas pressure drop) if you...

  10. 40 CFR 60.4870 - How do I establish my operating limits?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Sewage Sludge Incineration Units Initial Compliance Requirements § 60.4870 How do I establish my... compliance with the emission limit for particulate matter, cadmium, and lead. (4) For an activated carbon... limit and monitor sorbent injection rate and carrier gas flow rate (or carrier gas pressure drop) if you...

  11. 40 CFR 60.4870 - How do I establish my operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Sewage Sludge Incineration Units Initial Compliance Requirements § 60.4870 How do I establish my... compliance with the emission limit for particulate matter, cadmium, and lead. (4) For an activated carbon... limit and monitor sorbent injection rate and carrier gas flow rate (or carrier gas pressure drop) if you...

  12. 40 CFR 60.4870 - How do I establish my operating limits?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Sewage Sludge Incineration Units Initial Compliance Requirements § 60.4870 How do I establish my... compliance with the emission limit for particulate matter, cadmium, and lead. (4) For an activated carbon... limit and monitor sorbent injection rate and carrier gas flow rate (or carrier gas pressure drop) if you...

  13. 14 CFR 27.1503 - Airspeed limitations: general.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Operating Limitations and Information... established. (b) When airspeed limitations are a function of weight, weight distribution, altitude, rotor...

  14. 40 CFR 434.71 - Applicability.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... determines that it is not feasible for a remining operator to re-establish baseline pollutant levels in accordance with the statistical procedures contained in Appendix B of this part, pre-existing discharge limitations at existing remining operations shall remain subject to baseline pollutant levels established...

  15. 40 CFR Table 4 to Subpart Vvvv of... - Operating Limits if Using an Add-on Control Device for Open Molding Operations

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... operating limit by— 1. Thermal oxidizer The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.5725(d) a. Collecting the combustion temperature data according to § 63.5725(d); b. reducing the data to 3-hour block averages; and c...

  16. 40 CFR Table 4 to Subpart Vvvv of... - Operating Limits if Using an Add-on Control Device for Open Molding Operations

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... operating limit by— 1. Thermal oxidizer The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.5725(d) a. Collecting the combustion temperature data according to § 63.5725(d); b. reducing the data to 3-hour block averages; and c...

  17. 40 CFR Table 4 to Subpart Vvvv of... - Operating Limits if Using an Add-on Control Device for Open Molding Operations

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... operating limit by— 1. Thermal oxidizer The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.5725(d) a. Collecting the combustion temperature data according to § 63.5725(d); b. reducing the data to 3-hour block averages; and c...

  18. 14 CFR 23.1501 - General.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false General. 23.1501 Section 23.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... limitations and information necessary for safe operation must be established. (b) The operating limitations...

  19. 14 CFR 23.1501 - General.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false General. 23.1501 Section 23.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... limitations and information necessary for safe operation must be established. (b) The operating limitations...

  20. 14 CFR 25.23 - Load distribution limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within certain load distribution... and center of gravity combinations must be established. (b) The load distribution limits may not...

  1. 14 CFR 25.23 - Load distribution limits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within certain load distribution... and center of gravity combinations must be established. (b) The load distribution limits may not...

  2. 14 CFR 25.23 - Load distribution limits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within certain load distribution... and center of gravity combinations must be established. (b) The load distribution limits may not...

  3. 14 CFR 25.23 - Load distribution limits.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within certain load distribution... and center of gravity combinations must be established. (b) The load distribution limits may not...

  4. 14 CFR 25.23 - Load distribution limits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) Ranges of weights and centers of gravity within which the airplane may be safely operated must be established. If a weight and center of gravity combination is allowable only within certain load distribution... and center of gravity combinations must be established. (b) The load distribution limits may not...

  5. 40 CFR Table 7 to Subpart Ddddd of... - Establishing Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Particulate matter, mercury, or total selected metals a. Wet scrubber operating parameters i. Establish a site... drop and liquid flow rate monitors and the particulate matter, mercury, or total selected metals... from the pressure drop and liquid flow rate monitors and the particulate matter, mercury, or total...

  6. 40 CFR Table 3 to Subpart Dddd of... - Model Rule-Operating Limits for Wet Scrubbers

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Scrubbers 3 Table 3 to Subpart DDDD of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...—Model Rule—Operating Limits for Wet Scrubbers For these operating parameters You must establish these... intermittent units) a Pressure drop across the wet scrubber or amperage to wet scrubber Minimum pressure drop...

  7. 40 CFR Table 3 to Subpart Dddd of... - Model Rule-Operating Limits for Wet Scrubbers

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Scrubbers 3 Table 3 to Subpart DDDD of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...—Model Rule—Operating Limits for Wet Scrubbers For these operating parameters You must establish these... intermittent units) a Pressure drop across the wet scrubber or amperage to wet scrubber Minimum pressure drop...

  8. Criticality Safety Evaluations on the Use of 200-gram Pu Mass Limit for RHWM Waste Storage Operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chou, P

    This work establishes the criticality safety technical basis to increase the fissile mass limit from 120 grams to 200 grams for Type A 55-gallon drums and their equivalents. Current RHWM fissile mass limit is 120 grams Pu for Type A 55-gallon containers and their equivalent. In order to increase the Type A 55-gallon drum limit to 200 grams, a few additional criticality safety control requirements are needed on moderators, reflectors, and array controls to ensure that the 200-gram Pu drums remain criticality safe with inadvertent criticality remains incredible. The purpose of this work is to analyze the use of 200-grammore » Pu drum mass limit for waste storage operations in Radioactive and Hazardous Waste Management (RHWM) Facilities. In this evaluation, the criticality safety controls associated with the 200-gram Pu drums are established for the RHWM waste storage operations. With the implementation of these criticality safety controls, the 200-gram Pu waste drum storage operations are demonstrated to be criticality safe and meet the double-contingency-principle requirement per DOE O 420.1.« less

  9. Medicaid program; revision to Medicaid upper payment limit requirements for hospital services, nursing facility services, intermediate care facility services for the mentally retarded, and clinic services. Health Care Financing Administration (HCFA), HHS. Final rule.

    PubMed

    2001-01-12

    This final rule modifies the Medicaid upper payment limits for inpatient hospital services, outpatient hospital services, nursing facility services, intermediate care facility services for the mentally retarded, and clinic services. For each type of Medicaid inpatient service, existing regulations place an upper limit on overall aggregate payments to all facilities and a separate aggregate upper limit on payments made to State-operated facilities. This final rule establishes an aggregate upper limit that applies to payments made to government facilities that are not State government-owned or operated, and a separate aggregate upper limit on payments made to privately-owned and operated facilities. This rule also eliminates the overall aggregate upper limit that had applied to these services. With respect to outpatient hospital and clinic services, this final rule establishes an aggregate upper limit on payments made to State government-owned or operated facilities, an aggregate upper limit on payments made to government facilities that are not State government-owned or operated, and an aggregate upper limit on payments made to privately-owned and operated facilities. These separate upper limits are necessary to ensure State Medicaid payment systems promote economy and efficiency. We are allowing a higher upper limit for payment to non-State public hospitals to recognize the higher costs of inpatient and outpatient services in public hospitals. In addition, to ensure continued beneficiary access to care and the ability of States to adjust to the changes in the upper payment limits, the final rule includes a transition period for States with approved rate enhancement State plan amendments.

  10. 40 CFR 52.1233 - Operating permits.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Minnesota § 52.1233 Operating permits. Emission limitations and related provisions which are established in Minnesota permits as federally...

  11. 40 CFR Table 1 to Subpart Nnnn of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... continuous compliance with the operating limit by . . . 1. thermal oxidizer a. the average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4167(a) i. collecting the combustion temperature data according to § 63.4168(c);ii. reducing the...

  12. 40 CFR Table 1 to Subpart Nnnn of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... continuous compliance with the operating limit by . . . 1. thermal oxidizer a. the average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4167(a) i. collecting the combustion temperature data according to § 63.4168(c);ii. reducing the...

  13. 40 CFR 63.9917 - How do I demonstrate initial compliance with the emission limitations and work practice standards...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... subpart; and (2) For each wet scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured during the performance test in...

  14. 40 CFR 63.9917 - How do I demonstrate initial compliance with the emission limitations and work practice standards...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... subpart; and (2) For each wet scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured during the performance test in...

  15. 40 CFR 63.9917 - How do I demonstrate initial compliance with the emission limitations and work practice standards...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... subpart; and (2) For each wet scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured during the performance test in...

  16. 40 CFR 63.9917 - How do I demonstrate initial compliance with the emission limitations and work practice standards...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... subpart; and (2) For each wet scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured during the performance test in...

  17. 40 CFR 63.9917 - How do I demonstrate initial compliance with the emission limitations and work practice standards...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... subpart; and (2) For each wet scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.9890(b), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured during the performance test in...

  18. 40 CFR 52.1233 - Operating permits.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Minnesota § 52.1233 Operating permits. (a) Emission limitations and related provisions which are established in Minnesota permits as federally...

  19. 40 CFR 52.1233 - Operating permits.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Minnesota § 52.1233 Operating permits. (a) Emission limitations and related provisions which are established in Minnesota permits as federally...

  20. 40 CFR 52.1233 - Operating permits.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Minnesota § 52.1233 Operating permits. (a) Emission limitations and related provisions which are established in Minnesota permits as federally...

  1. 40 CFR 52.1233 - Operating permits.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Minnesota § 52.1233 Operating permits. (a) Emission limitations and related provisions which are established in Minnesota permits as federally...

  2. Safety and operational impacts of differential speed limits on two-lane rural highways in Montana.

    DOT National Transportation Integrated Search

    2016-07-01

    Speed limit policies can be broadly classified into two categories. Uniform speed limit policies establish the same maximum limit for all vehicles, while differential speed limit policies set a lower limit for heavy trucks in comparison to cars and l...

  3. Safety and operational impacts of differential speed limits on two-lane rural highways in Montana : project summary.

    DOT National Transportation Integrated Search

    2016-07-01

    Speed limit policies can be broadly classified into two categories. Uniform speed limit policies establish the same maximum limit for all vehicles, while differential speed limit policies set a lower limit for heavy trucks in comparison to cars and l...

  4. 40 CFR 63.7825 - How do I demonstrate initial compliance with the emission limitations that apply to me?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... accordance with § 63.7824(a)(1); and (3) For each venturi scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.7790(b)(2), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured...

  5. 40 CFR 63.7825 - How do I demonstrate initial compliance with the emission limitations that apply to me?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... accordance with § 63.7824(a)(1); and (3) For each venturi scrubber subject to the operating limits for pressure drop and scrubber water flow rate in § 63.7790(b)(2), you have established appropriate site-specific operating limits and have a record of the pressure drop and scrubber water flow rate measured...

  6. 14 CFR 33.7 - Engine ratings and operating limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... turbine wheel inlet gas. (5) Pressure of— (i) Fuel at the fuel inlet; and (ii) Oil at the main oil gallery. (6) Accessory drive torque and overhang moment. (7) Component life. (8) Turbosupercharger turbine wheel r.p.m. (c) For turbine engines, ratings and operating limitations are established relating to the...

  7. Tripropellant engine study

    NASA Technical Reports Server (NTRS)

    Wheeler, D. B.

    1977-01-01

    Work conducted was devoted to three main tasks. Thermochemical equilibrium performance data were assembled to establish the expected performance calculations of the mode 1 engine propellant combinations and thermodynamic and transport data for the products of combustion. Turbine drive gas characteristics were also established. Thrust chamber and nozzle cooling studies were devoted to the evaluation of H2, C3H8, CH4, and RP-1 as coolants in the existing SSME cooling circuit geometry. It was found that all these candidate coolants are feasible without limiting the desired operating conditions with the exception of RP-1, which would limit the maximum P(c) to 2000 psia. RP-1 could be used, however, to cool the nozzle only without imposing the chamber pressure limit. A total of 15 candidate engine system cycles were selected and a preliminary engine system balance was conducted for 12 of these systems to establish component operating flowrates, pressures and temperatures. It was found that the staged combustion cycles employing fuel rich LOX/hydrocarbon turbine drive gases are power limited.

  8. 40 CFR 60.58c - Reporting and recordkeeping requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... conducted to determine compliance with the emissions limits and/or to establish or re-establish operating... were established or re-established, if applicable. (7) All documentation produced as a result of the... Reporting Tool located at http://www.epa.gov/ttn/chief/ert/ert_tool.html. [62 FR 48382, Sept. 15, 1997, as...

  9. 40 CFR 60.58c - Reporting and recordkeeping requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... conducted to determine compliance with the emissions limits and/or to establish or re-establish operating... were established or re-established, if applicable. (7) All documentation produced as a result of the... Reporting Tool located at http://www.epa.gov/ttn/chief/ert/ert_tool.html. [62 FR 48382, Sept. 15, 1997, as...

  10. 14 CFR 25.21 - Proof of compliance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... augmentation system or upon any other automatic or power-operated system, compliance must be shown with §§ 25... appendix C, assuming normal operation of the airplane and its ice protection system in accordance with the operating limitations and operating procedures established by the applicant and provided in the Airplane...

  11. 14 CFR 25.21 - Proof of compliance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... augmentation system or upon any other automatic or power-operated system, compliance must be shown with §§ 25... appendix C, assuming normal operation of the airplane and its ice protection system in accordance with the operating limitations and operating procedures established by the applicant and provided in the Airplane...

  12. 14 CFR 25.21 - Proof of compliance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... augmentation system or upon any other automatic or power-operated system, compliance must be shown with §§ 25..., assuming normal operation of the airplane and its ice protection system in accordance with the operating limitations and operating procedures established by the applicant and provided in the Airplane Flight Manual...

  13. 14 CFR 25.21 - Proof of compliance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... augmentation system or upon any other automatic or power-operated system, compliance must be shown with §§ 25..., assuming normal operation of the airplane and its ice protection system in accordance with the operating limitations and operating procedures established by the applicant and provided in the Airplane Flight Manual...

  14. 40 CFR 63.8595 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... with the production-based hydrogen fluoride (HF), hydrogen chloride (HCl), and particulate matter (PM) emission limits in Table 1 to this subpart, you must calculate your mass emissions per unit of production... specific conditions in Table 4 to this subpart. (d) You must test while operating at the maximum production...

  15. 40 CFR 63.8445 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... limitations. (1) To determine compliance with the production-based hydrogen fluoride (HF), hydrogen chloride... operating at the maximum production level. (e) You may not conduct performance tests during periods of... mass emissions per unit of production for each test run using Equation 1 of this section: ER16MY03.000...

  16. 40 CFR 63.3167 - How do I establish the add-on control device operating limits during the performance test?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... record the desorption gas inlet temperature at least once every 15 minutes during each of the three runs... and record the average desorption gas inlet temperature. The minimum operating limit for the concentrator is 8 degrees Celsius (15 degrees Fahrenheit) below the average desorption gas inlet temperature...

  17. 40 CFR 63.3167 - How do I establish the add-on control device operating limits during the performance test?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... record the desorption gas inlet temperature at least once every 15 minutes during each of the three runs... and record the average desorption gas inlet temperature. The minimum operating limit for the concentrator is 8 degrees Celsius (15 degrees Fahrenheit) below the average desorption gas inlet temperature...

  18. 40 CFR 63.3167 - How do I establish the add-on control device operating limits during the performance test?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... record the desorption gas inlet temperature at least once every 15 minutes during each of the three runs... and record the average desorption gas inlet temperature. The minimum operating limit for the concentrator is 8 degrees Celsius (15 degrees Fahrenheit) below the average desorption gas inlet temperature...

  19. 40 CFR 63.3167 - How do I establish the add-on control device operating limits during the performance test?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... record the desorption gas inlet temperature at least once every 15 minutes during each of the three runs... and record the average desorption gas inlet temperature. The minimum operating limit for the concentrator is 8 degrees Celsius (15 degrees Fahrenheit) below the average desorption gas inlet temperature...

  20. 49 CFR 71.1 - Limits defined; exceptions authorized for certain rail operating purposes only.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Transportation STANDARD TIME ZONE BOUNDARIES § 71.1 Limits defined; exceptions authorized for certain rail... zones established by section 1 of the Standard Time Act, as amended by section 4 of the Uniform Time Act... carriers, whose operations cross the time zone boundaries prescribed by this part, authorizing them to...

  1. 7 CFR 1465.22 - Conservation practice operation and maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) during the contract duration to ensure that operation and maintenance requirements are being carried out... established in accordance with § 1465.23, provided such payments do not exceed the payment limitation...

  2. 40 CFR 122.44 - Establishing limitations, standards, and other permit conditions (applicable to State NPDES...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ocean discharges; (8) Incorporate alternative effluent limitations or standards where warranted by... storm water discharges associated with industrial activity from inactive mining operations may, where...

  3. 40 CFR 122.44 - Establishing limitations, standards, and other permit conditions (applicable to State NPDES...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ocean discharges; (8) Incorporate alternative effluent limitations or standards where warranted by... storm water discharges associated with industrial activity from inactive mining operations may, where...

  4. 40 CFR 122.44 - Establishing limitations, standards, and other permit conditions (applicable to State NPDES...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ocean discharges; (8) Incorporate alternative effluent limitations or standards where warranted by... storm water discharges associated with industrial activity from inactive mining operations may, where...

  5. 40 CFR 122.44 - Establishing limitations, standards, and other permit conditions (applicable to State NPDES...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ocean discharges; (8) Incorporate alternative effluent limitations or standards where warranted by... storm water discharges associated with industrial activity from inactive mining operations may, where...

  6. 10 CFR 34.45 - Operating and emergency procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.45 Operating and... that no person is likely to be exposed to radiation doses in excess of the limits established in 10 CFR...

  7. 10 CFR 34.45 - Operating and emergency procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.45 Operating and... that no person is likely to be exposed to radiation doses in excess of the limits established in 10 CFR...

  8. 10 CFR 34.45 - Operating and emergency procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.45 Operating and... that no person is likely to be exposed to radiation doses in excess of the limits established in 10 CFR...

  9. 10 CFR 34.45 - Operating and emergency procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.45 Operating and... that no person is likely to be exposed to radiation doses in excess of the limits established in 10 CFR...

  10. 10 CFR 34.45 - Operating and emergency procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.45 Operating and... that no person is likely to be exposed to radiation doses in excess of the limits established in 10 CFR...

  11. Establishing and sustaining a biorepository network in Israel: challenges and progress.

    PubMed

    Cohen, Yehudit; Almog, Ronit; Onn, Amir; Itzhaki-Alfia, Ayelet; Meir, Karen

    2013-12-01

    Over the past 5 years, using European and North American biobanks as models, the grass-roots establishment of independently operating biobanks has occurred virtually simultaneously in large Israeli teaching hospitals. The process of establishing a national biorepository network in Israel has progressed slowly, sustained mainly by a few proponents working together on a personal level. Slow progress has been due to limited funding and the lack of a legal framework specific to biobanking activities. Recently, due to increasing pressure from the scientific community, the government has earmarked funds for a national biorepository network, and the structure is now being established. In forming a network, Israel's biobanks face certain difficulties, particularly lack of support. Additional challenges include harmonization of standard operating procedures, database centralization, and use of a common informed consent form. In this article, we highlight some of the issues faced by Israel's biobank managers in establishing and sustaining a functional biobank network, information that could provide guidance for other small countries with limited resources.

  12. Operating and hydrodynamic characteristics of a reversed flow jet loop bioreactor (RFJLB) with ejector.

    PubMed

    Wagh, Sameer M; Koranne, Kishore V; Sonolikar, Ram L

    2012-04-01

    The hydrodynamic characteristics of RFJLB was studied with superficial liquid velocity (Ul), nozzle diameter (Dn) and nozzle height (Hn) in the range of 0.0293-0.094m/s, 17.4-22.0mm and 50-400mm, respectively. For Dn=17.4mm, Hn=50 and 200mm, with ejector mode and regular operating procedure i.e. simultaneous entry of gas with increasing liquid velocity, had limitation of not establishing the circulation loop. To overcome this limitation a modified operating procedure i.e. entry of gas after established liquid circulation loop is proposed. Also the comparison of gas holdups with ejector and injector mode proves the effectiveness of ejector mode and can eliminate the supply of compressed gas. Thus proper choice of Dn, Hn and also the operating procedure becomes necessary. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Bearing tester data compilation, analysis and reporting and bearing math modeling, volume 1

    NASA Technical Reports Server (NTRS)

    Marshall, D. D.; Montgomery, E. E.; New, L. S.; Stone, M. A.; Tiller, B. K.

    1984-01-01

    Thermal and mechanical models of high speed angular contact ball bearings operating in LOX and LN2 were developed and verified with limited test data in an effort to further understand the parameters that determine or effect the SSME turbopump bearing operational characteristics and service life. The SHABERTH bearing analysis program which was adapted to evaluate shaft bearing systems in cryogenics is not capable of accommodating varying thermal properties and two phase flow. A bearing model with this capability was developed using the SINDA thermal analyzer. Iteration between the SHABERTH and the SINDA models enable the establishment of preliminary bounds for stable operation in LN2. These limits were established in terms of fluid flow, fluid inlet temperature, and axial load for a shaft speed of 30,000 RPM.

  14. 36 CFR 4.11 - Load, weight and size limits.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... limits established by State law apply to a vehicle operated on a park road. However, the superintendent may designate more restrictive limits when appropriate for traffic safety or protection of the road... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Load, weight and size limits...

  15. 36 CFR 4.11 - Load, weight and size limits.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... limits established by State law apply to a vehicle operated on a park road. However, the superintendent may designate more restrictive limits when appropriate for traffic safety or protection of the road... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Load, weight and size limits...

  16. 36 CFR 4.11 - Load, weight and size limits.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... limits established by State law apply to a vehicle operated on a park road. However, the superintendent may designate more restrictive limits when appropriate for traffic safety or protection of the road... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Load, weight and size limits...

  17. 36 CFR 4.11 - Load, weight and size limits.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... limits established by State law apply to a vehicle operated on a park road. However, the superintendent may designate more restrictive limits when appropriate for traffic safety or protection of the road... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Load, weight and size limits...

  18. 36 CFR 4.11 - Load, weight and size limits.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... INTERIOR VEHICLES AND TRAFFIC SAFETY § 4.11 Load, weight and size limits. (a) Vehicle load, weight and size limits established by State law apply to a vehicle operated on a park road. However, the superintendent may designate more restrictive limits when appropriate for traffic safety or protection of the road...

  19. 77 FR 13369 - Biweekly Notice Applications and Amendments to Facility Operating Licenses Involving No...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-06

    ...] Leakage Detection Systems,'' to define a new time limit for restoring inoperable RCS leakage detection instrumentation to operable status, establish alternate methods of monitoring RCS leakage when monitors are... design bases related to the operability of the RCS leakage detection instrumentation. Date of issuance...

  20. 40 CFR 52.1834 - Minor source permit to operate program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Minor source permit to operate program... Minor source permit to operate program. Emission limitations and related provisions, which, in accordance with Rule 33-15-14-03, are established as federally enforceable conditions in North Dakota minor...

  1. 40 CFR 52.1834 - Minor source permit to operate program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Minor source permit to operate program... Minor source permit to operate program. Emission limitations and related provisions, which, in accordance with Rule 33-15-14-03, are established as federally enforceable conditions in North Dakota minor...

  2. 40 CFR Table 2 to Subpart Zzzzz of... - Procedures for Establishing Operating Limits for New Affected Sources Classified as Large Foundries

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... using the procedures in the following table: For . . . You must . . . 1. Each wet scrubber subject to the operating limits in § 63.10895(d)(1) for pressure drop and scrubber water flow rate. Using the CPMS required in § 63.10897(b), measure and record the pressure drop and scrubber water flow rate in...

  3. 40 CFR Table 2 to Subpart Zzzzz of... - Procedures for Establishing Operating Limits for New Affected Sources Classified as Large Foundries

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... using the procedures in the following table: For . . . You must . . . 1. Each wet scrubber subject to the operating limits in § 63.10895(d)(1) for pressure drop and scrubber water flow rate. Using the CPMS required in § 63.10897(b), measure and record the pressure drop and scrubber water flow rate in...

  4. 40 CFR Table 2 to Subpart Zzzzz of... - Procedures for Establishing Operating Limits for New Affected Sources Classified as Large Foundries

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... using the procedures in the following table: For . . . You must . . . 1. Each wet scrubber subject to the operating limits in § 63.10895(d)(1) for pressure drop and scrubber water flow rate. Using the CPMS required in § 63.10897(b), measure and record the pressure drop and scrubber water flow rate in...

  5. Global cost of correcting vision impairment from uncorrected refractive error.

    PubMed

    Fricke, T R; Holden, B A; Wilson, D A; Schlenther, G; Naidoo, K S; Resnikoff, S; Frick, K D

    2012-10-01

    To estimate the global cost of establishing and operating the educational and refractive care facilities required to provide care to all individuals who currently have vision impairment resulting from uncorrected refractive error (URE). The global cost of correcting URE was estimated using data on the population, the prevalence of URE and the number of existing refractive care practitioners in individual countries, the cost of establishing and operating educational programmes for practitioners and the cost of establishing and operating refractive care facilities. The assumptions made ensured that costs were not underestimated and an upper limit to the costs was derived using the most expensive extreme for each assumption. There were an estimated 158 million cases of distance vision impairment and 544 million cases of near vision impairment caused by URE worldwide in 2007. Approximately 47 000 additional full-time functional clinical refractionists and 18 000 ophthalmic dispensers would be required to provide refractive care services for these individuals. The global cost of educating the additional personnel and of establishing, maintaining and operating the refractive care facilities needed was estimated to be around 20 000 million United States dollars (US$) and the upper-limit cost was US$ 28 000 million. The estimated loss in global gross domestic product due to distance vision impairment caused by URE was US$ 202 000 million annually. The cost of establishing and operating the educational and refractive care facilities required to deal with vision impairment resulting from URE was a small proportion of the global loss in productivity associated with that vision impairment.

  6. 14 CFR 25.1531 - Maneuvering flight load factors.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maneuvering flight load factors. 25.1531... Operating Limitations § 25.1531 Maneuvering flight load factors. Load factor limitations, not exceeding the positive limit load factors determined from the maneuvering diagram in § 25.333(b), must be established. ...

  7. Daylight operation of a free space, entanglement-based quantum key distribution system

    NASA Astrophysics Data System (ADS)

    Peloso, Matthew P.; Gerhardt, Ilja; Ho, Caleb; Lamas-Linares, Antía; Kurtsiefer, Christian

    2009-04-01

    Many quantum key distribution (QKD) implementations using a free space transmission path are restricted to operation at night time in order to distinguish the signal photons used for a secure key establishment from the background light. Here, we present a lean entanglement-based QKD system overcoming that limitation. By implementing spectral, spatial and temporal filtering techniques, we establish a secure key continuously over several days under varying light and weather conditions.

  8. Indirectly sensing accelerator beam currents for limiting maximum beam current magnitude

    DOEpatents

    Bogaty, J.M.; Clifft, B.E.; Bollinger, L.M.

    1995-08-08

    A beam current limiter is disclosed for sensing and limiting the beam current in a particle accelerator, such as a cyclotron or linear accelerator, used in scientific research and medical treatment. A pair of independently operable capacitive electrodes sense the passage of charged particle bunches to develop an RF signal indicative of the beam current magnitude produced at the output of a bunched beam accelerator. The RF signal produced by each sensing electrode is converted to a variable DC voltage indicative of the beam current magnitude. The variable DC voltages thus developed are compared to each other to verify proper system function and are further compared to known references to detect beam currents in excess of pre-established limits. In the event of a system malfunction, or if the detected beam current exceeds pre-established limits, the beam current limiter automatically inhibits further accelerator operation. A high Q tank circuit associated with each sensing electrode provides a narrow system bandwidth to reduce noise and enhance dynamic range. System linearity is provided by injecting, into each sensing electrode, an RF signal that is offset from the bunching frequency by a pre-determined beat frequency to ensure that subsequent rectifying diodes operate in a linear response region. The system thus provides a large dynamic range in combination with good linearity. 6 figs.

  9. Indirectly sensing accelerator beam currents for limiting maximum beam current magnitude

    DOEpatents

    Bogaty, John M.; Clifft, Benny E.; Bollinger, Lowell M.

    1995-01-01

    A beam current limiter for sensing and limiting the beam current in a particle accelerator, such as a cyclotron or linear accelerator, used in scientific research and medical treatment. A pair of independently operable capacitive electrodes sense the passage of charged particle bunches to develop an RF signal indicative of the beam current magnitude produced at the output of a bunched beam accelerator. The RF signal produced by each sensing electrode is converted to a variable DC voltage indicative of the beam current magnitude. The variable DC voltages thus developed are compared to each other to verify proper system function and are further compared to known references to detect beam currents in excess of pre-established limits. In the event of a system malfunction, or if the detected beam current exceeds pre-established limits, the beam current limiter automatically inhibits further accelerator operation. A high Q tank circuit associated with each sensing electrode provides a narrow system bandwidth to reduce noise and enhance dynamic range. System linearity is provided by injecting, into each sensing electrode, an RF signal that is offset from the bunching frequency by a pre-determined beat frequency to ensure that subsequent rectifying diodes operate in a linear response region. The system thus provides a large dynamic range in combination with good linearity.

  10. 14 CFR 29.1501 - General.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false General. 29.1501 Section 29.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... for safe operation must be established. (b) The operating limitations and other information necessary...

  11. 14 CFR 27.1501 - General.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false General. 27.1501 Section 27.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... for safe operation must be established. (b) The operating limitations and other information necessary...

  12. 14 CFR 29.1501 - General.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false General. 29.1501 Section 29.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... for safe operation must be established. (b) The operating limitations and other information necessary...

  13. 14 CFR 27.1501 - General.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false General. 27.1501 Section 27.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... for safe operation must be established. (b) The operating limitations and other information necessary...

  14. 14 CFR 25.1501 - General.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false General. 25.1501 Section 25.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... for safe operation must be established. (b) The operating limitations and other information necessary...

  15. 14 CFR 25.1501 - General.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false General. 25.1501 Section 25.1501 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... for safe operation must be established. (b) The operating limitations and other information necessary...

  16. A harmonization effort for acceptable daily exposure application to pharmaceutical manufacturing - Operational considerations.

    PubMed

    Hayes, Eileen P; Jolly, Robert A; Faria, Ellen C; Barle, Ester Lovsin; Bercu, Joel P; Molnar, Lance R; Naumann, Bruce D; Olson, Michael J; Pecquet, Alison M; Sandhu, Reena; Shipp, Bryan K; Sussman, Robert G; Weideman, Patricia A

    2016-08-01

    A European Union (EU) regulatory guideline came into effect for all new pharmaceutical products on June 1st, 2015, and for all existing pharmaceutical products on December 1st, 2015. This guideline centers around the use of the Acceptable Daily Exposure (ADE) [synonymous with the Permitted Daily Exposure (PDE)] and operational considerations associated with implementation are outlined here. The EU guidance states that all active pharmaceutical ingredients (API) require an ADE; however, other substances such as starting materials, process intermediates, and cleaning agents may benefit from an ADE. Problems in setting ADEs for these additional substances typically relate to toxicological data limitations precluding the ability to establish a formal ADE. Established methodologies such as occupational exposure limits or bands (OELs or OEBs) and the threshold of toxicological concern (TTC) can be used or adjusted for use as interim ADEs when only limited data are available and until a more formal ADE can be established. Once formal ADEs are derived, it is important that the documents are routinely updated and that these updates are communicated to appropriate stakeholders. Another key operational consideration related to data-poor substances includes the use of maximum daily dose (MDD) in setting cross-contamination limits. The MDD is an important part of the maximum allowable/safe concentration (MAC/MSC) calculation and there are important considerations for its use and definition. Finally, other considerations discussed include operational aspects of setting ADEs for pediatrics, considerations for large molecules, and risk management in shared facilities. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. 40 CFR 63.8445 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... startup, shutdown, or malfunction, as specified in § 63.7(e)(1). (f) You must conduct at least three... changes. (ii) The type of monitoring device or procedure that will be used. (iii) The operating parameters...

  18. 40 CFR 113.4 - Size classes and associated liability limits for fixed onshore oil storage facilities, 1,000...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Size classes and associated liability... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS LIABILITY LIMITS FOR... privity and knowledge of the owner or operator, the following limits of liability are established for...

  19. Army gas-cooled reactor systems program. Preliminary design report off-normal scram system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bushnell, W.H.; Malmstrom, S.A.

    1965-06-01

    The maximum allowable ML-1 fuel element cladding (hot spot) temperature is established by ANTS 201 at 1750/sup 0/F. The existing ML-1 design makes no provision for automatic scram when this limit is reached. Operating experience has indicated a requirement for such an automatic system during plant startup and a revised hot spot envelope (generated during conceptual design of the scram system) established the desirability of extending this protection to operation at full power conditions. It was also determined that the scram system should include circuitry to initiate an automatic scram if reactor ..delta..T exceeded 450/sup 0/F (the limit established inmore » ANTS 201) and if reactor power exceeded 6 kw(t) without coolant flow in the main loop. The preliminary design of the scram system (designated off-normal scram system) which will provide the required protection is described.« less

  20. Evaluation of Options for Interpreting Environmental ...

    EPA Pesticide Factsheets

    Report Secondary data from the BioResponse Operational Testing and Evaluation project were used to study six options for interpreting culture-based/microbial count data sets that include left censored data, or measurements that are less than established quantification limits and/or detection limits.

  1. 40 CFR 160.81 - Standard operating procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... methods that management is satisfied are adequate to insure the quality and integrity of the data... authorized by the study director and shall be documented in the raw data. Significant changes in established... procedures shall be established for, but not limited to, the following: (1) Test system area preparation. (2...

  2. 40 CFR 160.81 - Standard operating procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... methods that management is satisfied are adequate to insure the quality and integrity of the data... authorized by the study director and shall be documented in the raw data. Significant changes in established... procedures shall be established for, but not limited to, the following: (1) Test system area preparation. (2...

  3. 40 CFR Table 1 to Subpart Mmmm of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... Thermal oxidizer a. The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.3967(a) i. Collecting the combustion temperature... 3-hour average combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a...

  4. 40 CFR Table 1 to Subpart Mmmm of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.3967(a) i. Collecting the combustion temperature data according to... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  5. 40 CFR Table 1 to Subpart Pppp of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4567(a). i. Collecting the combustion temperature data according to... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  6. 40 CFR Table 1 to Subpart Mmmm of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... Thermal oxidizer a. The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.3967(a) i. Collecting the combustion temperature... 3-hour average combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a...

  7. 40 CFR Table 1 to Subpart Pppp of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4567(a). i. Collecting the combustion temperature data according to... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  8. 40 CFR Table 1 to Subpart Pppp of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4567(a). i. Collecting the combustion temperature data according to... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  9. 40 CFR Table 1 to Subpart Mmmm of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... Thermal oxidizer a. The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.3967(a) i. Collecting the combustion temperature... 3-hour average combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a...

  10. 40 CFR Table 1 to Subpart Mmmm of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.3967(a) i. Collecting the combustion temperature data according to... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  11. 40 CFR Table 3 to Subpart Eeee of... - Operating Limits-High Throughput Transfer Racks

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... with adsorbent regeneration to comply with an emission limit in table 2 to this subpart a. Maintain the... compliance with the emission limit; OR b. Maintain the total regeneration stream mass flow during the adsorption bed regeneration cycle greater than or equal to the reference stream mass flow established during...

  12. 40 CFR Table 3 to Subpart Eeee of... - Operating Limits-High Throughput Transfer Racks

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... with adsorbent regeneration to comply with an emission limit in table 2 to this subpart a. Maintain the... compliance with the emission limit; OR b. Maintain the total regeneration stream mass flow during the adsorption bed regeneration cycle greater than or equal to the reference stream mass flow established during...

  13. 40 CFR Table 3 to Subpart Eeee of... - Operating Limits-High Throughput Transfer Racks

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... with adsorbent regeneration to comply with an emission limit in table 2 to this subpart a. Maintain the... compliance with the emission limit; OR b. Maintain the total regeneration stream mass flow during the adsorption bed regeneration cycle greater than or equal to the reference stream mass flow established during...

  14. 40 CFR 52.2184 - Operating permits for minor sources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 5 2012-07-01 2012-07-01 false Operating permits for minor sources. 52.2184 Section 52.2184 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... permits for minor sources. Emission limitations and related provisions established in South Dakota minor...

  15. 40 CFR 52.2184 - Operating permits for minor sources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 5 2013-07-01 2013-07-01 false Operating permits for minor sources. 52.2184 Section 52.2184 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... permits for minor sources. Emission limitations and related provisions established in South Dakota minor...

  16. 40 CFR 52.2184 - Operating permits for minor sources.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 5 2014-07-01 2014-07-01 false Operating permits for minor sources. 52.2184 Section 52.2184 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... permits for minor sources. Emission limitations and related provisions established in South Dakota minor...

  17. 40 CFR 52.2184 - Operating permits for minor sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Operating permits for minor sources. 52.2184 Section 52.2184 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... permits for minor sources. Emission limitations and related provisions established in South Dakota minor...

  18. 40 CFR 52.2184 - Operating permits for minor sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Operating permits for minor sources. 52.2184 Section 52.2184 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... permits for minor sources. Emission limitations and related provisions established in South Dakota minor...

  19. Feasibility and costs of phosphorus application limits on 39 U.S. swine operations.

    PubMed

    Lory, John A; Massey, Raymond E; Zulovich, Joseph M; Hoehne, John A; Schmidt, Amy M; Carlson, Marcia S; Fulhage, Charles D

    2004-01-01

    Concerns about manure P and water quality have prompted new regulations imposing P limits on land application of manure. Previous research established that P limits increase land needs for animal feeding operations. We evaluated the effect of N, annual P, and rotation P limits on the feasibility of manure management. A mechanistic model characterized manure management practices on 39 swine operations (20 unagitated lagoon and 19 slurry operations) in five states (Iowa, Missouri, North Carolina, Oklahoma, and Pennsylvania). Extensive information collected from each operation was used to determine effects of manure storage type, ownership structure, and application limits on attributes of manure management. Phosphorus limits had substantially greater effect on slurry operations, increasing land needs 250% (0.3 hectares per animal unit [AU]) and time for manure application 24% (2.5 min AU(-1)) for rotation P limits and 41% (4.4 min AU(-1)) for annual P limits. Annual P limits were infeasible for current land application equipment on two operations and had the greatest effect on time and costs because they required all but three slurry operations to reduce discharge rate. We recommend implementing rotation P limits (not to exceed crop N need) to minimize time effects, allow most farmers to use their current manure application methods, and allow manure to fulfill crop N and P needs in the year of application. Phosphorus limits increased potential manure value but would require slurry operations to recover at least 61% of manure value through manure sales. Phosphorus limits are likely to shape the U.S. swine industry through differential effects on the various sectors of the swine industry.

  20. Food Cravings Consume Limited Cognitive Resources

    ERIC Educational Resources Information Center

    Kemps, Eva; Tiggemann, Marika; Grigg, Megan

    2008-01-01

    Using Tiffany's (1990) cognitive model of drug use and craving as a theoretical basis, the present experiments investigated whether cravings for food expend limited cognitive resources. Cognitive performance was assessed by simple reaction time (Experiment 1) and an established measure of working memory capacity, the operation span task…

  1. Aircraft Ship Operations (Le Couple Aeronef-Navire dan les Operations)

    DTIC Science & Technology

    1991-11-01

    control and military establishment will not communications; battle change very much or very fast. management ; and recommaissance. Even if the USSR... manageable limits. c. Further work is needed to determine the cor- rect way to assess the combined effects of pitch and For aircraft launch and recovery... fairings , must be combined with minimizing motions to reduce spray a. The limit value of0.Sdegrees trimby the bow and wetness. is driven by sink off the bow

  2. Establishing powder-handling workflow practices and standard operating procedures: compounding pharmacy and safety.

    PubMed

    Prince, Bryan; Lundevall, Jeremy

    2014-01-01

    This is an ongoing discussion and analysis of powder-handling safety in the compounding pharmacy laboratory that started in the November/December 2013 issue of the International Journal of Pharmaceutical Compounding. In the previous technical article, we established that most chemical powders handled during compounding procedures have an established occupational exposure limits and that powders are micronized during manipulation. All micronized powders handled on an open bench create health hazards to the technicians and create a potential for cross-contamination to the lab environment. Proper identification of the chemical hazard and established standard operating procedures in direct correlation to Good Lab Practices when working inside a powder hood will positively improve the compounding pharmacy's work environment.

  3. 40 CFR Table 4 to Subpart Xxxx of... - Operating Limits for Puncture Sealant Application Control Devices

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... performance test. 2. Carbon adsorber (regenerative) to which puncture sealant application spray booth emissions are ducted a. Maintain the total regeneration mass, volumetric flow, and carbon bed temperature at the operating range established during the performance test.b. Reestablish the carbon bed temperature...

  4. Optical projectors simulate human eyes to establish operator's field of view

    NASA Technical Reports Server (NTRS)

    Beam, R. A.

    1966-01-01

    Device projects visual pattern limits of the field of view of an operator as his eyes are directed at a given point on a control panel. The device, which consists of two projectors, provides instant evaluation of visual ability at a point on a panel.

  5. 40 CFR Table 2 to Subpart Kkkkk of... - Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... Maintain the average scrubber pressure drop for each 3-hour block period at or above the average pressure drop established during the performance test; andb. Maintain the average scrubber liquid pH for each 3-hour block period at or above the average scrubber liquid pH established during the performance test...

  6. 40 CFR 63.8595 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Clay Ceramics...) emission limits in Table 1 to this subpart, you must calculate your mass emissions per unit of production...

  7. 40 CFR Table 3 to Subpart Qqqq of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4767(a) i. Collecting the combustion temperature data according to § 63.4768(c... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  8. 40 CFR Table 3 to Subpart Qqqq of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4767(a) i. Collecting the combustion temperature data according to § 63.4768(c... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  9. 40 CFR Table 3 to Subpart Qqqq of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4767(a) i. Collecting the combustion temperature data according to § 63.4768(c... combustion temperature at or above the temperature limit. 2. Catalytic oxidizer a. The average temperature...

  10. 29 CFR 1918.86 - Roll-on roll-off (Ro-Ro) operations (see also § 1918.2, Ro-Ro operations, and § 1918.25).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., Ro-Ro operations, and § 1918.25). 9 [Reserved] (a) Traffic control system. An organized system of vehicular and pedestrian traffic control shall be established and maintained at each entrance/exit ramp and on ramps within the vessel as traffic flow warrants. (b) Ramp load limit. Each ramp shall be plainly...

  11. 29 CFR 1918.86 - Roll-on roll-off (Ro-Ro) operations (see also § 1918.2, Ro-Ro operations, and § 1918.25).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., Ro-Ro operations, and § 1918.25). 9 [Reserved] (a) Traffic control system. An organized system of vehicular and pedestrian traffic control shall be established and maintained at each entrance/exit ramp and on ramps within the vessel as traffic flow warrants. (b) Ramp load limit. Each ramp shall be plainly...

  12. 29 CFR 1918.86 - Roll-on roll-off (Ro-Ro) operations (see also § 1918.2, Ro-Ro operations, and § 1918.25).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., Ro-Ro operations, and § 1918.25). 9 [Reserved] (a) Traffic control system. An organized system of vehicular and pedestrian traffic control shall be established and maintained at each entrance/exit ramp and on ramps within the vessel as traffic flow warrants. (b) Ramp load limit. Each ramp shall be plainly...

  13. Adherence to balance tolerance limits at the Upper Mississippi Science Center, La Crosse, Wisconsin.

    USGS Publications Warehouse

    Myers, C.T.; Kennedy, D.M.

    1998-01-01

    Verification of balance accuracy entails applying a series of standard masses to a balance prior to use and recording the measured values. The recorded values for each standard should have lower and upper weight limits or tolerances that are accepted as verification of balance accuracy under normal operating conditions. Balance logbooks for seven analytical balances at the Upper Mississippi Science Center were checked over a 3.5-year period to determine if the recorded weights were within the established tolerance limits. A total of 9435 measurements were checked. There were 14 instances in which the balance malfunctioned and operators recorded a rationale in the balance logbook. Sixty-three recording errors were found. Twenty-eight operators were responsible for two types of recording errors: Measurements of weights were recorded outside of the tolerance limit but not acknowledged as an error by the operator (n = 40); and measurements were recorded with the wrong number of decimal places (n = 23). The adherence rate for following tolerance limits was 99.3%. To ensure the continued adherence to tolerance limits, the quality-assurance unit revised standard operating procedures to require more frequent review of balance logbooks.

  14. The SPR detection of Salmonella enteritidis in food using aptamers as recongnition elements

    NASA Astrophysics Data System (ADS)

    Di, W. T.; Du, X. W.; Pan, M. F.; Wang, J. P.

    2017-09-01

    In this experiment, a fast, accurate, non-destructive, unmarked and simple-operation detection method for Salmonella enteritidis in food was established by the BI-3000 plasma resonance biosensor (SPR). This article establishes a method of using nucleic acid aptamer as immune recognition element in SPR which can be employed to detect Salmonella enteritidis in food for the first time. The experimental conditions were screened and the experimental scheme was validated and applied. The best flow rate was 5μL/min, the best concentration of the aptamers was 180mM, and the best regenerating solution was the 20mM NaOH. This method had almost no cross-reactivity. Besides, we established a standard curve of Salmonella enteritidis and SPR signal, with the detection limit of 2 cfu/mL. Finally, we tested the samples of chicken, pork, shrimp and fish purchased from supermarkets. The method has the advantages of short time, low detection limit and easy operation, which can be used for a large number of food samples.

  15. 14 CFR 25.25 - Weight limits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... weights corresponding to the airplane operating conditions (such as ramp, ground or water taxi, takeoff... conditions (such as zero fuel weight, center of gravity position and weight distribution) must be established...

  16. 14 CFR 25.25 - Weight limits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... weights corresponding to the airplane operating conditions (such as ramp, ground or water taxi, takeoff... conditions (such as zero fuel weight, center of gravity position and weight distribution) must be established...

  17. 14 CFR 25.25 - Weight limits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... weights corresponding to the airplane operating conditions (such as ramp, ground or water taxi, takeoff... conditions (such as zero fuel weight, center of gravity position and weight distribution) must be established...

  18. 7 CFR 1709.111 - Limitations on use of grant funds.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with a proven operating history, and for which there is an established industry for the design... utilizing experimental, developmental, or prototype technologies or technology demonstrations are not...

  19. 7 CFR 1709.111 - Limitations on use of grant funds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... with a proven operating history, and for which there is an established industry for the design... utilizing experimental, developmental, or prototype technologies or technology demonstrations are not...

  20. 7 CFR 1709.111 - Limitations on use of grant funds.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with a proven operating history, and for which there is an established industry for the design... utilizing experimental, developmental, or prototype technologies or technology demonstrations are not...

  1. 7 CFR 1709.111 - Limitations on use of grant funds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with a proven operating history, and for which there is an established industry for the design... utilizing experimental, developmental, or prototype technologies or technology demonstrations are not...

  2. 75 FR 18907 - Notice of Opportunity for Public Comment on the Proposed Model Safety Evaluation for Plant...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... Specifications (STS) to define a new time limit for restoring inoperable RCS leakage detection instrumentation to... contents of the facility design bases related to the operability of the RCS leakage detection... leakage detection instrumentation to operable status and establish alternate methods of monitoring RCS...

  3. 40 CFR 60.63 - Monitoring of operations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... § 60.62, you must demonstrate compliance through an initial performance test. You will conduct your performance test using Method 5 or Method 5I at appendix A-3 to part 60 of this chapter. You must also monitor... CPMS, you will establish a site-specific operating limit. If your PM performance test demonstrates your...

  4. 40 CFR 60.63 - Monitoring of operations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... § 60.62, you must demonstrate compliance through an initial performance test. You will conduct your performance test using Method 5 or Method 5I at appendix A-3 to part 60 of this chapter. You must also monitor... CPMS, you will establish a site-specific operating limit. If your PM performance test demonstrates your...

  5. NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR PREPARATION OF STANDARD OPERATING PROCEDURES (SOPS) (UA-G-1.0)

    EPA Science Inventory

    The purpose of this SOP is to establish a uniform format for the preparation of SOPs. Use of these protocols ensures consistent implementation of project tasks, documents the preparation and implementation of the procedures used, describes quality control measures and the limits...

  6. 14 CFR 29.1093 - Induction system icing protection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... prevent icing has a preheater that can provide a heat rise of 100 °F. (b) Turbine engines. (1) It must be shown that each turbine engine and its air inlet system can operate throughout the flight power range of... engine operation, within the limitations established for the rotorcraft. (2) Each turbine engine must...

  7. 14 CFR 29.1093 - Induction system icing protection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... prevent icing has a preheater that can provide a heat rise of 100 °F. (b) Turbine engines. (1) It must be shown that each turbine engine and its air inlet system can operate throughout the flight power range of... engine operation, within the limitations established for the rotorcraft. (2) Each turbine engine must...

  8. 14 CFR 29.1093 - Induction system icing protection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... prevent icing has a preheater that can provide a heat rise of 100 °F. (b) Turbine engines. (1) It must be shown that each turbine engine and its air inlet system can operate throughout the flight power range of... engine operation, within the limitations established for the rotorcraft. (2) Each turbine engine must...

  9. 14 CFR 29.1093 - Induction system icing protection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... prevent icing has a preheater that can provide a heat rise of 100 °F. (b) Turbine engines. (1) It must be shown that each turbine engine and its air inlet system can operate throughout the flight power range of... engine operation, within the limitations established for the rotorcraft. (2) Each turbine engine must...

  10. 40 CFR Table 5 to Subpart Mmmmm of... - Continuous Compliance With Emission Limits and Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... performance test. v. If you use a venturi scrubber, maintaining the daily average pressure drop across the.... Each new or reconstructed flame lamination affected source using a scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performanceb...

  11. 40 CFR Table 2 to Subpart Ppppp of... - Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.9324(a) i. Collecting the combustion temperature data according to § 63.9306(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour average combustion temperature...

  12. 40 CFR Table 2 to Subpart Ppppp of... - Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.9324(a) i. Collecting the combustion temperature data according to § 63.9306(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour average combustion temperature...

  13. 40 CFR Table 2 to Subpart Ppppp of... - Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.9324(a) i. Collecting the combustion temperature data according to § 63.9306(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour average combustion temperature...

  14. 40 CFR Table 2 to Subpart Ppppp of... - Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.9324(a) i. Collecting the combustion temperature data according to § 63.9306(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour average combustion temperature...

  15. 40 CFR Table 2 to Subpart Ppppp of... - Operating Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.9324(a) i. Collecting the combustion temperature data according to § 63.9306(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour average combustion temperature...

  16. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection...

  17. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection...

  18. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection...

  19. 40 CFR 60.5175 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection..., fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit... device other than a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection...

  20. Space shuttle I-tube radiator testing at Johnson Space Center, May 1976, volume 1

    NASA Technical Reports Server (NTRS)

    Scheps, P. B.

    1976-01-01

    During the two weeks of thermal vacuum testing a representative forward panel was successfully operated in a variety of simulated environmental conditions. Performance limits for both high and low load operations were established. Confidence in the stable operation of the panel throughout its typical operating range was verified by the testing, and design studies were conducted to analyze the effects of the payload bay door, and the panel deployment angle, on performance.

  1. Space of states in operator BFV-formalism

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Batalin, I.A.; Tyutin, I.V.

    1993-05-15

    The dynamically adequate Fock realization of the extended space of asymptotic states is given within the framework of the operator BFV-formalism and of the Dirac quantization scheme as well. Physical subspace is picked out and established to be naturally isomorphic to the Dirac space of states. The formal mechanism (unitary [var epsilon]-limit), by means of which the operator BFV-dynamics reduces to the Dirac one, is studied. 10 refs.

  2. 40 CFR 180.1196 - Peroxyacetic acid; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... handling establishments including, but not limited to dairies, dairy barns, restaurants, food service operations, breweries, wineries, and beverage and food processing plants. [74 FR 26535, June 3, 2009] ...

  3. 29 CFR 780.714 - Employees employed “in such operations” to be counted.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... § 780.714 Employees employed “in such operations” to be counted. (a) The five-employee limitation on the... operations.” This means that the employees to be counted include those employed in, and do not include any who are not employed in, the operations of the establishment commonly recognized as a country elevator...

  4. 40 CFR Table 2 to Subpart Mmmmm of... - Operating Limits for New or Reconstructed Flame Lamination Affected Sources

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... scrubber, maintain the daily average pressure drop across the venturi within the operating range value... . . . You must . . . 1. Scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performance test. b. Maintain the daily average scrubber effluent pH...

  5. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR PREPARATION OF STANDARD OPERATING PROCEDURES (SOPS) (UA-G-1.0)

    EPA Science Inventory

    The purpose of this SOP is to establish a uniform format for the preparation of SOPs. Use of these protocols ensures consistent implementation of project tasks, documents the preparation and implementation of the procedures used, describes quality control measures and the limits...

  6. 40 CFR 63.4168 - What are the requirements for continuous parameter monitoring system installation, operation, and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... paragraphs (a) and (c)(1) through (3) of this section: (1) For a thermal oxidizer, install a gas temperature... any substantial heat exchange occurs. (2) For a catalytic oxidizer, install a gas temperature monitor in the gas stream immediately before the catalyst bed, and if you establish operating limits...

  7. 40 CFR 63.4168 - What are the requirements for continuous parameter monitoring system installation, operation, and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... paragraphs (a) and (c)(1) through (3) of this section: (1) For a thermal oxidizer, install a gas temperature... any substantial heat exchange occurs. (2) For a catalytic oxidizer, install a gas temperature monitor in the gas stream immediately before the catalyst bed, and if you establish operating limits...

  8. 40 CFR Table 2 to Subpart Mmmmm of... - Operating Limits for New or Reconstructed Flame Lamination Affected Sources

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... . . . You must . . . 1. Scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performance test. b. Maintain the daily average scrubber effluent pH... scrubber, maintain the daily average pressure drop across the venturi within the operating range value...

  9. 40 CFR 63.10023 - How do I establish my PM CPMS operating limit and determine compliance with it?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the PM compliance test, the milliamp equivalent of zero output from your PM CPMS, and the average PM... establishing a relationship of PM CPMS signal to PM concentration using the PM CPMS instrument zero, the...) Determine your PM CPMS instrument zero output with one of the following procedures. (1) Zero point data for...

  10. Development of display design and command usage guidelines for Spacelab experiment computer applications

    NASA Technical Reports Server (NTRS)

    Dodson, D. W.; Shields, N. L., Jr.

    1979-01-01

    Individual Spacelab experiments are responsible for developing their CRT display formats and interactive command scenarios for payload crew monitoring and control of experiment operations via the Spacelab Data Display System (DDS). In order to enhance crew training and flight operations, it was important to establish some standardization of the crew/experiment interface among different experiments by providing standard methods and techniques for data presentation and experiment commanding via the DDS. In order to establish optimum usage guidelines for the Spacelab DDS, the capabilities and limitations of the hardware and Experiment Computer Operating System design had to be considered. Since the operating system software and hardware design had already been established, the Display and Command Usage Guidelines were constrained to the capabilities of the existing system design. Empirical evaluations were conducted on a DDS simulator to determine optimum operator/system interface utilization of the system capabilities. Display parameters such as information location, display density, data organization, status presentation and dynamic update effects were evaluated in terms of response times and error rates.

  11. A method of setting limits for the purpose of quality assurance

    NASA Astrophysics Data System (ADS)

    Sanghangthum, Taweap; Suriyapee, Sivalee; Kim, Gwe-Ya; Pawlicki, Todd

    2013-10-01

    The result from any assurance measurement needs to be checked against some limits for acceptability. There are two types of limits; those that define clinical acceptability (action limits) and those that are meant to serve as a warning that the measurement is close to the action limits (tolerance limits). Currently, there is no standard procedure to set these limits. In this work, we propose an operational procedure to set tolerance limits and action limits. The approach to establish the limits is based on techniques of quality engineering using control charts and a process capability index. The method is different for tolerance limits and action limits with action limits being categorized into those that are specified and unspecified. The procedure is to first ensure process control using the I-MR control charts. Then, the tolerance limits are set equal to the control chart limits on the I chart. Action limits are determined using the Cpm process capability index with the requirements that the process must be in-control. The limits from the proposed procedure are compared to an existing or conventional method. Four examples are investigated: two of volumetric modulated arc therapy (VMAT) point dose quality assurance (QA) and two of routine linear accelerator output QA. The tolerance limits range from about 6% larger to 9% smaller than conventional action limits for VMAT QA cases. For the linac output QA, tolerance limits are about 60% smaller than conventional action limits. The operational procedure describe in this work is based on established quality management tools and will provide a systematic guide to set up tolerance and action limits for different equipment and processes.

  12. Some Operating Experience and Problems Encountered During Operation of a Free-jet Facility

    NASA Technical Reports Server (NTRS)

    Mcaulay, John E; Prince, William R

    1957-01-01

    During a free-jet investigation of a 28-inch ram-jet engine at a Mach number of 2.35, flow pulsation at the engine inlet were discovered which proved to have an effect on the engine performance and operational characteristics, particularly the engine rich blowout limits. This report discusses the finding of the flow pulsations, their elimination, and effect. Other facility characteristics, such as the establishment of flow simulation and the degree of subcritical operation of the diffuser, are also explained.

  13. 40 CFR 63.10011 - How do I demonstrate initial compliance with the emissions limits and work practice standards?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Hazardous Air Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Testing and Initial... liquid oil-fired unit, and you use quarterly stack testing for HCl and HF plus site-specific parameter monitoring to demonstrate continuous performance, you must also establish a site-specific operating limit, in...

  14. 40 CFR 63.10011 - How do I demonstrate initial compliance with the emissions limits and work practice standards?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Hazardous Air Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Testing and Initial... liquid oil-fired unit, and you use quarterly stack testing for HCl and HF plus site-specific parameter monitoring to demonstrate continuous performance, you must also establish a site-specific operating limit, in...

  15. 76 FR 32323 - Limited Service Domestic Voyage Load Lines for River Barges on Lake Michigan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-06

    ...-AA17 Limited Service Domestic Voyage Load Lines for River Barges on Lake Michigan AGENCY: Coast Guard... for certain river barges operating on Lake Michigan, as established in the final rule published on... in the Federal Register (75 FR 70595) (2010 final rule) that finalized the special Lake Michigan load...

  16. 40 CFR 63.9800 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... determine compliance with the total hydrocarbon (THC) emission concentration limit listed in Table 1 to this... using Equation 1 of this section: ER16AP03.000 Where: C THC-C = THC concentration, corrected to 18 percent oxygen, parts per million by volume, dry basis (ppmvd) C THC = THC concentration (uncorrected...

  17. 40 CFR 62.14685 - May I conduct a repeat performance test to establish new operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Continuous Compliance...

  18. 40 CFR 62.14685 - May I conduct a repeat performance test to establish new operating limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Continuous Compliance...

  19. Analysis of Fresnel Zone Plates Focusing Dependence on Operating Frequency

    PubMed Central

    Fuster, José Miguel; Candelas, Pilar; Castiñeira-Ibáñez, Sergio; Pérez-López, Sergio

    2017-01-01

    The focusing properties of Fresnel Zone Plates (FZPs) against frequency are analyzed in this work. It is shown that the FZP focal length depends almost linearly on the operating frequency. Focal depth and focal distortion are also considered, establishing a limit on the frequency span at which the operating frequency can be shifted. An underwater FZP ultrasound focusing system is demonstrated, and experimental results agree with the theoretical analysis and simulations. PMID:29206137

  20. Darboux theorems and Wronskian formulas for integrable systems I. Constrained KP flows

    NASA Astrophysics Data System (ADS)

    Oevel, W.

    1993-05-01

    Generalizations of the classical Darboux theorem are established for pseudo-differential scattering operators of the form L = limit∑i=0N u i∂ i + limitΣi=1m Φ i∂ -1limitΨi†i. Iteration of the Darboux transformations leads to a gauge transformed operator with coefficients given by Wronskian formulas involving a set of eigenfunctions of L. Nonlinear integrable partial differential equations are associated with the scattering operator L which arise as a symmetry reduction of the multicomponent KP hierarchy. With a suitable linear time evolution for the eigenfunctions the Darboux transformation is used to obtain solutions of the integrable equations in terms of Wronskian determinants.

  1. 14 CFR 25.1515 - Landing gear speeds.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Limitations § 25.1515 Landing gear speeds. (a) The established landing gear operating speed or speeds, V LO... retraction speed, the two speeds must be designated as V LO(EXT) and V LO(RET), respectively. (b) The...

  2. 14 CFR 25.1515 - Landing gear speeds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Limitations § 25.1515 Landing gear speeds. (a) The established landing gear operating speed or speeds, V LO... retraction speed, the two speeds must be designated as V LO(EXT) and V LO(RET), respectively. (b) The...

  3. 14 CFR 25.1515 - Landing gear speeds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Limitations § 25.1515 Landing gear speeds. (a) The established landing gear operating speed or speeds, V LO... retraction speed, the two speeds must be designated as V LO(EXT) and V LO(RET), respectively. (b) The...

  4. 14 CFR 25.1515 - Landing gear speeds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Limitations § 25.1515 Landing gear speeds. (a) The established landing gear operating speed or speeds, V LO... retraction speed, the two speeds must be designated as V LO(EXT) and V LO(RET), respectively. (b) The...

  5. 14 CFR 25.1515 - Landing gear speeds.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Limitations § 25.1515 Landing gear speeds. (a) The established landing gear operating speed or speeds, V LO... retraction speed, the two speeds must be designated as V LO(EXT) and V LO(RET), respectively. (b) The...

  6. 40 CFR 63.9800 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... determine compliance with the total hydrocarbon (THC) emission concentration limit listed in Table 1 to this... using Equation 1 of this section: ER16AP03.000 Where: C THC-C=THC concentration, corrected to 18 percent oxygen, parts per million by volume, dry basis (ppmvd) C THC=THC concentration (uncorrected), ppmvd CO2...

  7. 40 CFR 63.9800 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... determine compliance with the total hydrocarbon (THC) emission concentration limit listed in Table 1 to this... using Equation 1 of this section: ER16AP03.000 Where: C THC-C=THC concentration, corrected to 18 percent oxygen, parts per million by volume, dry basis (ppmvd) C THC=THC concentration (uncorrected), ppmvd CO2...

  8. 40 CFR 63.9800 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... determine compliance with the total hydrocarbon (THC) emission concentration limit listed in Table 1 to this... using Equation 1 of this section: ER16AP03.000 Where: C THC-C=THC concentration, corrected to 18 percent oxygen, parts per million by volume, dry basis (ppmvd) C THC=THC concentration (uncorrected), ppmvd CO2...

  9. 40 CFR 63.9800 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... determine compliance with the total hydrocarbon (THC) emission concentration limit listed in Table 1 to this... using Equation 1 of this section: ER16AP03.000 Where: C THC-C=THC concentration, corrected to 18 percent oxygen, parts per million by volume, dry basis (ppmvd) C THC=THC concentration (uncorrected), ppmvd CO2...

  10. 49 CFR 193.2503 - Operating procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS FACILITIES... pressure so that the resultant gas is within limits established for the vaporizer and the downstream piping...

  11. Dynamics of high-bypass-engine thrust reversal using a variable-pitch fan

    NASA Technical Reports Server (NTRS)

    Schaefer, J. W.; Sagerser, D. R.; Stakolich, E. G.

    1977-01-01

    The test program demonstrated that successful and rapid forward-to reverse-thrust transients can be performed without any significant engine operational limitations for fan blade pitch changes through either feather pitch or flat pitch. For through-feather-pitch operation with a flight inlet, fan stall problems were encountered, and a fan blade overshoot technique was used to establish reverse thrust.

  12. Stabilizing detached Bridgman melt crystal growth: Proportional-integral feedback control

    NASA Astrophysics Data System (ADS)

    Yeckel, Andrew; Daoutidis, Prodromos; Derby, Jeffrey J.

    2012-10-01

    The dynamics, operability limits, and tuning of a proportional-integral feedback controller to stabilize detached vertical Bridgman crystal growth are analyzed using a capillary model of shape stability. The manipulated variable is the pressure difference between upper and lower vapor spaces, and the controlled variable is the gap width at the triple-phase line. Open and closed loop dynamics of step changes in these state variables are analyzed under both shape stable and shape unstable growth conditions. Effects of step changes in static contact angle and growth angle are also studied. Proportional and proportional-integral control can stabilize unstable growth, but only within tight operability limits imposed by the narrow range of allowed meniscus shapes. These limits are used to establish safe operating ranges of controller gain. Strong nonlinearity of the capillary model restricts the range of perturbations that can be stabilized, and under some circumstances, stabilizes a spurious operating state far from the set point. Stabilizing detachment at low growth angle proves difficult and becomes impossible at zero growth angle.

  13. 40 CFR Table 3 to Subpart Qqqq of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4767(a) i. Collecting the combustion temperature data according to § 63.4768(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour block average combustion...

  14. 40 CFR Table 1 to Subpart Rrrr of... - Operating Limits if Using the Emission Rate With Add-on Controls Option

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4966(a) i. collecting the combustion temperature data according to § 63.4967(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion temperature...

  15. 40 CFR Table 1 to Subpart Nnnn of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4167(a) i. collecting the combustion temperature data according to § 63.4168(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion temperature...

  16. 40 CFR Table 1 to Subpart Nnnn of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4167(a) i. collecting the combustion temperature data according to § 63.4168(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion temperature...

  17. 40 CFR Table 3 to Subpart Qqqq of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4767(a) i. Collecting the combustion temperature data according to § 63.4768(c);ii. Reducing the data to 3-hour block averages; and iii. Maintaining the 3-hour block average combustion...

  18. 40 CFR Table 1 to Subpart Rrrr of... - Operating Limits if Using the Emission Rate With Add-on Controls Option

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4966(a) i. collecting the combustion temperature data according to § 63.4967(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion...

  19. 40 CFR Table 1 to Subpart Rrrr of... - Operating Limits if Using the Emission Rate With Add-on Controls Option

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4966(a) i. collecting the combustion temperature data according to § 63.4967(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion...

  20. 40 CFR Table 1 to Subpart Nnnn of... - Operating Limits if Using the Emission Rate With Add-On Controls Option

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4167(a) i. collecting the combustion temperature data according to § 63.4168(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion temperature...

  1. 40 CFR Table 1 to Subpart Rrrr of... - Operating Limits if Using the Emission Rate With Add-on Controls Option

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4966(a) i. collecting the combustion temperature data according to § 63.4967(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion...

  2. 40 CFR Table 1 to Subpart Rrrr of... - Operating Limits if Using the Emission Rate With Add-on Controls Option

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... combustion temperature in any 3-hour period must not fall below the combustion temperature limit established according to § 63.4966(a) i. collecting the combustion temperature data according to § 63.4967(c);ii. reducing the data to 3-hour block averages; and iii. maintaining the 3-hour average combustion temperature...

  3. Ballistic Transport for Limit-Periodic Jacobi Matrices with Applications to Quantum Many-Body Problems

    NASA Astrophysics Data System (ADS)

    Fillman, Jake

    2017-03-01

    We study Jacobi matrices that are uniformly approximated by periodic operators. We show that if the rate of approximation is sufficiently rapid, then the associated quantum dynamics are ballistic in a rather strong sense; namely, the (normalized) Heisenberg evolution of the position operator converges strongly to a self-adjoint operator that is injective on the space of absolutely summable sequences. In particular, this means that all transport exponents corresponding to well-localized initial states are equal to one. Our result may be applied to a class of quantum many-body problems. Specifically, we establish a lower bound on the Lieb-Robinson velocity for an isotropic XY spin chain on the integers with limit-periodic couplings.

  4. Strategic establishment of an International Pharmacology Specialty Laboratory in a resource-limited setting.

    PubMed

    Mtisi, Takudzwa J; Maponga, Charles; Monera-Penduka, Tsitsi G; Mudzviti, Tinashe; Chagwena, Dexter; Makita-Chingombe, Faithful; DiFranchesco, Robin; Morse, Gene D

    2018-01-01

    A growing number of drug development studies that include pharmacokinetic evaluations are conducted in regions lacking a specialised pharmacology laboratory. This necessitated the development of an International Pharmacology Specialty Laboratory (IPSL) in Zimbabwe. The aim of this article is to describe the development of an IPSL in Zimbabwe. The IPSL was developed collaboratively by the University of Zimbabwe and the University at Buffalo Center for Integrated Global Biomedical Sciences. Key stages included infrastructure development, establishment of quality management systems and collaborative mentorship in clinical pharmacology study design and chromatographic assay development and validation. Two high performance liquid chromatography instruments were donated by an instrument manufacturer and a contract research organisation. Laboratory space was acquired through association with the Zimbabwe national drug regulatory authority. Operational policies, standard operating procedures and a document control system were established. Scientists and technicians were trained in aspects relevant to IPSL operations. A high-performance liquid chromatography method for nevirapine was developed with the guidance of the Clinical Pharmacology Quality Assurance programme and approved by the assay method review programme. The University of Zimbabwe IPSL is engaged with the United States National Institute of Allergy and Infectious Diseases Division of AIDS research networks and is poised to begin drug assays and pharmacokinetic analyses. An IPSL has been successfully established in a resource-limited setting through the efforts of an external partnership providing technical guidance and motivated internal faculty and staff. Strategic partnerships were beneficial in navigating challenges leading to laboratory development and training new investigators. The IPSL is now engaged in clinical pharmacology research.

  5. Implementation of noise budgets for civil airports

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bishop, D.E.

    1982-01-01

    An increasing number of airports are faced with the need for establishing a lid on the noise from aircraft operations and for developing programs for reducing airport noise on a year-to-year basis. As an example, the California Airport Noise Standard acts to impose such programs on a number of airports in California. Any airport faced with the need to establish a quantitative reduction of noise obviously wants to achieve this reduction with the least impact on numbers of operations and reduction in air transportation services to the community. A reduction in noise and an increase in operations usually can bemore » achieved only by encouraging use of the quietest aircraft available and, further adding incentives for operating procedures that minimize noise. One approach in administering airport noise reduction is to adopt an airport noise budget. As used in this paper, the noise budget concept implies that quantitative limits on the noise environment and on the noise contributions by major airport users will be established. Having methods for enforcing compliance with the airport budget for those airport users that exceed their budget will be established. Thus, the noise budget provides airport management, and major airport users, with quantitative measures for defining noise goals, and actual progress in achieving such goals.« less

  6. Catalytic ignition of hydrogen and oxygen propellants

    NASA Technical Reports Server (NTRS)

    Zurawski, Robert L.; Green, James M.

    1988-01-01

    An experimental program was conducted to evaluate the catalytic ignition of gaseous hydrogen and oxygen propellants. Shell 405 granular catalyst and a monolithic sponge catalyst were tested. Mixture ratio, mass flow rate, propellant temperature, and back pressure were varied parametrically in testing to determine the operational limits of the catalytic igniter. The test results show that the gaseous hydrogen and oxygen propellant combination can be ignited catalytically using Shell 405 catalyst over a wide range of mixture ratios, mass flow rates, and propellant injection temperatures. These operating conditions must be optimized to ensure reliable ignition for an extended period of time. A cyclic life of nearly 2000, 2 sec pulses at nominal operating conditions was demonstrated with the catalytic igniter. The results of the experimental program and the established operational limits for a catalytic igniter using the Shell 405 catalysts are presented.

  7. Catalytic ignition of hydrogen and oxygen propellants

    NASA Technical Reports Server (NTRS)

    Zurawski, Robert L.; Green, James M.

    1988-01-01

    An experimental program was conducted to evaluate the catalytic ignition of gaseous hydrogen and oxygen propellants. Shell 405 granular catalyst and a monolithic sponge catalyst were tested. Mixture ratio, mass flow rate, propellant temperature, and back pressure were varied parametrically in testing to determine the operational limits of the catalytic igniter. The test results show that the gaseous hydrogen and oxygen propellant combination can be ignited catalytically using Shell 405 catalyst over a wide range of mixture ratios, mass flow rates, and propellant injection temperatures. These operating conditions must be optimized to ensure reliable ignition for an extended period of time. A cyclic life of nearly 2000, 2 sec pulses at nominal operating conditions was demonstrated with the catalytic igniter. The results of the experimental program and the established operational limits for a catalytic igniter using the Shell 405 catalyst are presented.

  8. Continuous variable quantum cryptography: beating the 3 dB loss limit.

    PubMed

    Silberhorn, Ch; Ralph, T C; Lütkenhaus, N; Leuchs, G

    2002-10-14

    We demonstrate that secure quantum key distribution systems based on continuous variable implementations can operate beyond the apparent 3 dB loss limit that is implied by the beam splitting attack. The loss limit was established for standard minimum uncertainty states such as coherent states. We show that, by an appropriate postselection mechanism, we can enter a region where Eve's knowledge on Alice's key falls behind the information shared between Alice and Bob, even in the presence of substantial losses.

  9. Environmental Assessment for Establishment of an Off-Highway Vehicle (OHV) Program at Arnold Air Force Base, Tennessee

    DTIC Science & Technology

    2010-05-01

    OHV area for the following resource areas: geomorphology and soils , water quality and hydrology, biological resources, cultural resources, and...established in such a mmmer to avoid wetlands and minimize stream crossings and interaction with highly erodible soils . If such areas are utilized...operational constraints would be implemented that would minimize impacts in these areas, such as restricted use in wet soils and speed limits. At

  10. 32 CFR 176.5 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

  11. 32 CFR 176.5 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

  12. 24 CFR 586.5 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

  13. 40 CFR 63.7733 - What procedures must I use to establish operating limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... combustion device applied to emissions from a scrap preheater or TEA cold box mold or core making line... and record the scrubbing liquid flow rate during each TEA sampling run in intervals of no more than 15...

  14. 14 CFR 23.1583 - Operating limitations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) The maximum zero wing fuel weight, where relevant, as established in accordance with § 23.343. (d... passenger seating configuration. The maximum passenger seating configuration. (k) Allowable lateral fuel loading. The maximum allowable lateral fuel loading differential, if less than the maximum possible. (l...

  15. 24 CFR 586.5 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

  16. 7 CFR 1709.111 - Limitations on use of grant funds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... are unrelated to the grant project. (b) Unproven technology. Only projects that utilize technology with a proven operating history, and for which there is an established industry for the design... utilizing experimental, developmental, or prototype technologies or technology demonstrations are not...

  17. Characterizing the Hazard of a Wake Vortex Encounter

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D.; Brandon, Jay; Greene, George; Rivers, Robert; Shah, Gautam; Stewart, Eric; Stuever, Robert

    1998-01-01

    The National Aeronautics and Space Administration (NASA) is conducting research with the goal of enabling safe improvements in the capacity of the nation's air transportation system. The wake vortex upset hazard is an important factor in establishing the minimum safe spacing between aircraft during landing and take-off operations, thus impacting airport capacity. Static and free-flight wind tunnel tests and flight tests have provided an extensive data set for improved understanding of vortex encounter dynamics and simulation. Piloted and batch simulation studies are also ongoing to establish a first-order hazard metric and determine the limits of an operationally acceptable wake induced upset. This paper outlines NASA's research in these areas.

  18. Pollutant levels in discarded fish species by Spanish trawlers operating in the Great Sole Bank and the Atlantic coast of the Iberian Peninsula.

    PubMed

    Antelo, Luis T; Ordóñez-Del Pazo, Tatiana; Lopes, Carla; Franco-Uría, Amaya; Pérez-Martín, Ricardo I; Alonso, Antonio A

    2016-07-15

    Organic and inorganic pollutant levels were determined for the most discarded species from trawlers operating in Great Sole and Spanish coastal fishing grounds. Results for heavy metals indicated that Cd can reach values higher than legal limits for some species and tissues, while Hg and Pb concentrations are below established values. No significant variation was noticed with fishing grounds, but both season influences in the case of Pb and interspecies variation for Hg and Cd have been detected. Valorization recommendations could be therefore established according to the levels found in the different species. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Advanced optical blade tip clearance measurement system

    NASA Technical Reports Server (NTRS)

    Ford, M. J.; Honeycutt, R. E.; Nordlund, R. E.; Robinson, W. W.

    1978-01-01

    An advanced electro-optical system was developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in an operating gas turbine engine. This system is applicable to fan, compressor, and turbine blade tip clearance measurement requirements, and the system probe is particularly suitable for operation in the extreme turbine environment. A study of optical properties of blade tips was conducted to establish measurement system application limitations. A series of laboratory tests was conducted to determine the measurement system's operational performance characteristics and to demonstrate system capability under simulated operating gas turbine environmental conditions. Operational and environmental performance test data are presented.

  20. NASA deep space network operations planning and preparation

    NASA Technical Reports Server (NTRS)

    Jensen, W. N.

    1982-01-01

    The responsibilities and structural organization of the Operations Planning Group of NASA Deep Space Network (DSN) Operations are outlined. The Operations Planning group establishes an early interface with a user's planning organization to educate the user on DSN capabilities and limitations for deep space tracking support. A team of one or two individuals works through all phases of the spacecraft launch and also provides planning and preparation for specific events such as planetary encounters. Coordinating interface is also provided for nonflight projects such as radio astronomy and VLBI experiments. The group is divided into a Long Range Support Planning element and a Near Term Operations Coordination element.

  1. 40 CFR Table 2 to Subpart Uuuu of... - Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... values established during the compliance demonstration. 7. carbon absorber maintain the regeneration frequency, total regeneration adsorber stream mass or volumetric flow during carbon bed regeneration, and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s...

  2. 40 CFR Table 2 to Subpart Uuuu of... - Operating Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... values established during the compliance demonstration. 7. carbon absorber maintain the regeneration frequency, total regeneration adsorber stream mass or volumetric flow during carbon bed regeneration, and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s...

  3. 40 CFR Table 2 to Subpart Uuuu of... - Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... values established during the compliance demonstration. 7. carbon absorber maintain the regeneration frequency, total regeneration adsorber stream mass or volumetric flow during carbon bed regeneration, and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s...

  4. 14 CFR 417.417 - Propellants and explosives.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... radio frequency radiation sources in a radio frequency radiation exclusion area. A launch operator must determine the vulnerability of its electro-explosive devices and systems to radio frequency radiation and establish radio frequency radiation power limits or radio frequency radiation exclusion areas as required by...

  5. 14 CFR 417.417 - Propellants and explosives.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... radio frequency radiation sources in a radio frequency radiation exclusion area. A launch operator must determine the vulnerability of its electro-explosive devices and systems to radio frequency radiation and establish radio frequency radiation power limits or radio frequency radiation exclusion areas as required by...

  6. 14 CFR 417.417 - Propellants and explosives.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... radio frequency radiation sources in a radio frequency radiation exclusion area. A launch operator must determine the vulnerability of its electro-explosive devices and systems to radio frequency radiation and establish radio frequency radiation power limits or radio frequency radiation exclusion areas as required by...

  7. 14 CFR 417.417 - Propellants and explosives.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... radio frequency radiation sources in a radio frequency radiation exclusion area. A launch operator must determine the vulnerability of its electro-explosive devices and systems to radio frequency radiation and establish radio frequency radiation power limits or radio frequency radiation exclusion areas as required by...

  8. 14 CFR 1260.57 - New technology.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... operate, in case of a machine or system; and, in each case, under such conditions as to establish that the... items include, but are not limited to, new processes, machines, manufactures, and compositions of matter, and improvements to, or new applications of, existing processes, machines, manufactures, and...

  9. 14 CFR 1260.57 - New technology.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... operate, in case of a machine or system; and, in each case, under such conditions as to establish that the... items include, but are not limited to, new processes, machines, manufactures, and compositions of matter, and improvements to, or new applications of, existing processes, machines, manufactures, and...

  10. Embedding operational research into national disease control programme: lessons from 10 years of experience in Indonesia

    PubMed Central

    Mahendradhata, Yodi; Probandari, Ari; Widjanarko, Bagoes; Riono, Pandu; Mustikawati, Dyah; Tiemersma, Edine W.; Alisjahbana, Bachti

    2014-01-01

    There is growing recognition that operational research (OR) should be embedded into national disease control programmes. However, much of the current OR capacity building schemes are still predominantly driven by international agencies with limited integration into national disease control programmes. We demonstrated that it is possible to achieve a more sustainable capacity building effort across the country by establishing an OR group within the national tuberculosis (TB) control programme in Indonesia. Key challenges identified include long-term financial support, limited number of scientific publications, and difficulties in documenting impact on programmatic performance. External evaluation has expressed concerns in regard to utilisation of OR in policy making. Efforts to address this concern have been introduced recently and led to indications of increased utilisation of research evidence in policy making by the national TB control programme. Embedding OR in national disease control programmes is key in establishing an evidence-based disease control programme. PMID:25361728

  11. The business of palliative medicine--part 6: clinical operations in a comprehensive integrated program.

    PubMed

    Lagman, Ruth L; Walsh, Declan; LeGrand, Susan B; Davis, Mellar P

    2011-03-01

    The medical care of individuals with advanced disease is complex and has historically been fragmented and suboptimal. Palliative medicine attempts to address these needs. The Harry R. Horvitz Center for Palliative Medicine at the Cleveland Clinic is an established comprehensive integrated program. Structured and seamless clinical operations are important to ensure the best delivery of high-quality medical care and continuity for those affected by life-limiting illness.

  12. Provision of healthcare in a remote base of operations in southern Chad.

    PubMed

    Hickey, J P

    2010-09-01

    The Irish Defence Forces maintained a presence in south eastern Chad under the authority of the United Nations Security Council from January 2008 until May 2010, operating in a peace support role as the lead contingent in a multinational battalion. In September 2009 the task of establishing a forward operating base in a remote location within the area of operations was ordered by mission headquarters. Irish and Finnish troops duly deployed and began the task of establishing a safe and secure base from which to operate. This involved securing the location, installing accommodation, electricity, lighting and facilities for ablutions, removing natural hazards, establishing secure communications and ensuring rapid access and egress in the event of hostile contact or emergency. The incidence of disease at this location was low, with the notable exception of a limited outbreak of gastroenteritis. The high standard of engineering work carried out around the camp, especially the latrines, washing facilities and other hygiene measures, significantly contributed to minimising the transmission of infectious disease. The past experiences of the Defence Forces in Congo, Lebanon, East Timor, Eritrea and Liberia have led to a high standard of forward planning and logistical awareness within the organisation which served personnel well in this latest mission. Copyright © 2010 Elsevier Ltd. All rights reserved.

  13. 40 CFR 60.2725 - May I conduct a repeat performance test to establish new operating limits?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units Model... during any performance test used to demonstrate compliance. Model Rule—Monitoring ...

  14. 40 CFR 60.2725 - May I conduct a repeat performance test to establish new operating limits?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units Model... during any performance test used to demonstrate compliance. Model Rule—Monitoring ...

  15. 40 CFR Table 2 to Subpart Uuuu of... - Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... established during the compliance demonstration. 7. carbon absorber maintain the regeneration frequency, total regeneration adsorber stream mass or volumetric flow during carbon bed regeneration, and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each...

  16. 40 CFR Table 2 to Subpart Uuuu of... - Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... established during the compliance demonstration. 7. carbon absorber maintain the regeneration frequency, total regeneration adsorber stream mass or volumetric flow during carbon bed regeneration, and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each...

  17. 21 CFR 207.10 - Exemptions for establishments.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... are limited to pharmacies, hospitals, clinics, and public health agencies located in any State as defined in section 201(a)(1) of the act. (a) Pharmacies that operate under applicable local laws... in the regular course of the practice of the profession of pharmacy, including dispensing and selling...

  18. 21 CFR 207.10 - Exemptions for establishments.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... are limited to pharmacies, hospitals, clinics, and public health agencies located in any State as defined in section 201(a)(1) of the act. (a) Pharmacies that operate under applicable local laws... in the regular course of the practice of the profession of pharmacy, including dispensing and selling...

  19. 21 CFR 207.10 - Exemptions for establishments.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... are limited to pharmacies, hospitals, clinics, and public health agencies located in any State as defined in section 201(a)(1) of the act. (a) Pharmacies that operate under applicable local laws... in the regular course of the practice of the profession of pharmacy, including dispensing and selling...

  20. 21 CFR 207.10 - Exemptions for establishments.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... are limited to pharmacies, hospitals, clinics, and public health agencies located in any State as defined in section 201(a)(1) of the act. (a) Pharmacies that operate under applicable local laws... in the regular course of the practice of the profession of pharmacy, including dispensing and selling...

  1. 12 CFR 614.4155 - Interest rates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... pursuant to an interest rate plan within which management may establish rates. Any interest rate plan shall... management may adjust rates, and provide the upper and lower limits on management authority. Any interest... its review and approval of the institution's operational and strategic business plan. [62 FR 66818...

  2. 14 CFR § 1260.57 - New technology.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... operate, in case of a machine or system; and, in each case, under such conditions as to establish that the... items include, but are not limited to, new processes, machines, manufactures, and compositions of matter, and improvements to, or new applications of, existing processes, machines, manufactures, and...

  3. 12 CFR 614.4155 - Interest rates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... pursuant to an interest rate plan within which management may establish rates. Any interest rate plan shall... management may adjust rates, and provide the upper and lower limits on management authority. Any interest... its review and approval of the institution's operational and strategic business plan. [62 FR 66818...

  4. 40 CFR Table 4 to Subpart Kkkk of... - Operating Limits If Using the Emission Rate With Add-on Controls Option or the Control Efficiency...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... items in 2.a, 2.b, and 2.c of this table. 4. Carbon adsorber a. The total regeneration desorbing gas (e.g., steam or nitrogen) mass flow for each carbon bed regeneration cycle must not fall below the total regeneration desorbing gas mass flow limit established according to § 63.3546(d) or § 63.3556(d...

  5. 40 CFR Table 4 to Subpart Kkkk of... - Operating Limits If Using the Emission Rate With Add-on Controls Option or the Control Efficiency...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., 2.b, and 2.c of this table. 4. Carbon adsorber a. The total regeneration desorbing gas (e.g., steam or nitrogen) mass flow for each carbon bed regeneration cycle must not fall below the total regeneration desorbing gas mass flow limit established according to § 63.3546(d) or § 63.3556(d). i. Measuring...

  6. 40 CFR Table 4 to Subpart Kkkk of... - Operating Limits If Using the Emission Rate With Add-on Controls Option or the Control Efficiency...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... items in 2.a, 2.b, and 2.c of this table. 4. Carbon adsorber a. The total regeneration desorbing gas (e.g., steam or nitrogen) mass flow for each carbon bed regeneration cycle must not fall below the total regeneration desorbing gas mass flow limit established according to § 63.3546(d) or § 63.3556(d...

  7. 40 CFR Table 4 to Subpart Kkkk of... - Operating Limits If Using the Emission Rate With Add-on Controls Option or the Control Efficiency...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... items in 2.a, 2.b, and 2.c of this table. 4. Carbon adsorber a. The total regeneration desorbing gas (e.g., steam or nitrogen) mass flow for each carbon bed regeneration cycle must not fall below the total regeneration desorbing gas mass flow limit established according to § 63.3546(d) or § 63.3556(d...

  8. Mission Assurance Modeling and Simulation: A Cyber Security Roadmap

    NASA Technical Reports Server (NTRS)

    Gendron, Gerald; Roberts, David; Poole, Donold; Aquino, Anna

    2012-01-01

    This paper proposes a cyber security modeling and simulation roadmap to enhance mission assurance governance and establish risk reduction processes within constrained budgets. The term mission assurance stems from risk management work by Carnegie Mellon's Software Engineering Institute in the late 19905. By 2010, the Defense Information Systems Agency revised its cyber strategy and established the Program Executive Officer-Mission Assurance. This highlights a shift from simply protecting data to balancing risk and begins a necessary dialogue to establish a cyber security roadmap. The Military Operations Research Society has recommended a cyber community of practice, recognizing there are too few professionals having both cyber and analytic experience. The authors characterize the limited body of knowledge in this symbiotic relationship. This paper identifies operational and research requirements for mission assurance M&S supporting defense and homeland security. M&S techniques are needed for enterprise oversight of cyber investments, test and evaluation, policy, training, and analysis.

  9. Investigating the Acquisition, Generalization, and Emergence of Untrained Verbal Operants for Mands Acquired Using the Picture Exchange Communication System in Adults With Severe Developmental Disabilities

    PubMed Central

    Ziomek, Megan M; Rehfeldt, Ruth Anne

    2008-01-01

    This study compared the total amount of training time and total number of trial blocks for individuals with severe developmental disabilities to acquire mands under control of unconditioned establishing operations and mands under control of transitive conditioned establishing operations for manual sign and for the Picture Exchange Communication System (PECS). Also examined was the generalization of mands across settings and communicative partners, as well as the emergence of untrained tacts and intraverbals for mands acquired using PECS. Mands for preferred items and for items needed to complete a chained task were acquired more rapidly and in fewer training blocks for PECS than for manual sign. Moreover, mands established using PECS generalized across settings and communicative partners. Finally, untrained tacts and intraverbals using PECS were shown to emerge for some of the participants following PECS training. These results suggest that PECS may be a viable alternative communication system for adults with severe developmental disabilities who have little or no history of systematic instruction and limited imitative repertoires. PMID:22477401

  10. Investigating the acquisition, generalization, and emergence of untrained verbal operants for mands acquired using the picture exchange communication system in adults with severe developmental disabilities.

    PubMed

    Ziomek, Megan M; Rehfeldt, Ruth Anne

    2008-01-01

    This study compared the total amount of training time and total number of trial blocks for individuals with severe developmental disabilities to acquire mands under control of unconditioned establishing operations and mands under control of transitive conditioned establishing operations for manual sign and for the Picture Exchange Communication System (PECS). Also examined was the generalization of mands across settings and communicative partners, as well as the emergence of untrained tacts and intraverbals for mands acquired using PECS. Mands for preferred items and for items needed to complete a chained task were acquired more rapidly and in fewer training blocks for PECS than for manual sign. Moreover, mands established using PECS generalized across settings and communicative partners. Finally, untrained tacts and intraverbals using PECS were shown to emerge for some of the participants following PECS training. These results suggest that PECS may be a viable alternative communication system for adults with severe developmental disabilities who have little or no history of systematic instruction and limited imitative repertoires.

  11. Modeling operators' emergency response time for chemical processing operations.

    PubMed

    Murray, Susan L; Harputlu, Emrah; Mentzer, Ray A; Mannan, M Sam

    2014-01-01

    Operators have a crucial role during emergencies at a variety of facilities such as chemical processing plants. When an abnormality occurs in the production process, the operator often has limited time to either take corrective actions or evacuate before the situation becomes deadly. It is crucial that system designers and safety professionals can estimate the time required for a response before procedures and facilities are designed and operations are initiated. There are existing industrial engineering techniques to establish time standards for tasks performed at a normal working pace. However, it is reasonable to expect the time required to take action in emergency situations will be different than working at a normal production pace. It is possible that in an emergency, operators will act faster compared to a normal pace. It would be useful for system designers to be able to establish a time range for operators' response times for emergency situations. This article develops a modeling approach to estimate the time standard range for operators taking corrective actions or following evacuation procedures in emergency situations. This will aid engineers and managers in establishing time requirements for operators in emergency situations. The methodology used for this study combines a well-established industrial engineering technique for determining time requirements (predetermined time standard system) and adjustment coefficients for emergency situations developed by the authors. Numerous videos of workers performing well-established tasks at a maximum pace were studied. As an example, one of the tasks analyzed was pit crew workers changing tires as quickly as they could during a race. The operations in these videos were decomposed into basic, fundamental motions (such as walking, reaching for a tool, and bending over) by studying the videos frame by frame. A comparison analysis was then performed between the emergency pace and the normal working pace operations to determine performance coefficients. These coefficients represent the decrease in time required for various basic motions in emergency situations and were used to model an emergency response. This approach will make hazardous operations requiring operator response, alarm management, and evacuation processes easier to design and predict. An application of this methodology is included in the article. The time required for an emergency response was roughly a one-third faster than for a normal response time.

  12. PTTI applications at the limits of GPS

    NASA Technical Reports Server (NTRS)

    Douglas, Rob J.; Popelar, J.

    1995-01-01

    Canadian plans for precise time and time interval services are examined in the light of GPS capabilities developed for geodesy. We present our experience in establishing and operating a geodetic type GPS station in a time laboratory setting, and show sub-nanosecond residuals for time transfer between geodetic sites. We present our approach to establishing realistic standard uncertainties for short-term frequency calibration services over time intervals of hours, and for longer-term frequency dissemination at better than the 10(exp -15) level of accuracy.

  13. 14 CFR 1204.1405 - Approving authority.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1405 Approving authority. The authority to establish limitations and procedures for use of a NASA airfield, as well as the authority to approve or disapprove the use of the NASA airfield facilities subject...

  14. 14 CFR 1204.1405 - Approving authority.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1405 Approving authority. The authority to establish limitations and procedures for use of a NASA airfield, as well as the authority to approve or disapprove the use of the NASA airfield facilities subject...

  15. 14 CFR 1204.1405 - Approving authority.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1405 Approving authority. The authority to establish limitations and procedures for use of a NASA airfield, as well as the authority to approve or disapprove the use of the NASA airfield facilities subject...

  16. 14 CFR 1204.1405 - Approving authority.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1405 Approving authority. The authority to establish limitations and procedures for use of a NASA airfield, as well as the authority to approve or disapprove the use of the NASA airfield facilities subject...

  17. 40 CFR Table 6 to Subpart Uuuu of... - Continuous Compliance With Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... 7. carbon absorber maintain the regeneration frequency, total regeneration stream mass or volumetric flow during carbon bed regeneration and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each regeneration cycle within the values established...

  18. 40 CFR Table 6 to Subpart Uuuu of... - Continuous Compliance With Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... 7. carbon absorber maintain the regeneration frequency, total regeneration stream mass or volumetric flow during carbon bed regeneration and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each regeneration cycle within the values established...

  19. 40 CFR Table 6 to Subpart Uuuu of... - Continuous Compliance With Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... 7. carbon absorber maintain the regeneration frequency, total regeneration stream mass or volumetric flow during carbon bed regeneration and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each regeneration cycle within the values established...

  20. 40 CFR Table 6 to Subpart Uuuu of... - Continuous Compliance With Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... 7. carbon absorber maintain the regeneration frequency, total regeneration stream mass or volumetric flow during carbon bed regeneration and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each regeneration cycle within the values established...

  1. 40 CFR Table 6 to Subpart Uuuu of... - Continuous Compliance With Operating Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... 7. carbon absorber maintain the regeneration frequency, total regeneration stream mass or volumetric flow during carbon bed regeneration and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) for each regeneration cycle within the values established...

  2. 78 FR 23902 - Retail Exemptions Adjusted Dollar Limitations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ..., restaurants, and similar institutions without disqualifying itself for exemption from Federal inspection... conducted at retail stores and restaurants when those operations are conducted at any retail store or restaurant or similar retail-type establishment for sale in normal retail quantities (21 U.S.C. 661(c)(2) and...

  3. 40 CFR 401.12 - Law authorizing establishment of effluent limitations guidelines for existing sources, standards...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... available demonstrated control technology, processes, operating methods, or other alternatives, including... technology currently available as determined by the Administrator pursuant to section 304(b)(1) of the Act... available technology economically achievable which will result in reasonable further progress toward the...

  4. Task Force Resettlement Operation, After Action Report, Fort Chaffee, Arkansas, 7 May 1980-19 February 1982

    DTIC Science & Technology

    1982-06-09

    authority to use non-lethal force must be established at the very beginning of such an operation, especially in light of the limited manpower available to the...references, and accurate interpretations of the law, especially as to jurisdictiopal matters, are critical. RECOMMENDATION: It is reccmmended that in...appropriate. Intensive planning,training/rehearsal, and practice alerts was essential, especially so as units rotated every 60 days. In effect, the

  5. Harm-reduction activism: a case study of an unsanctioned user-run safe injection site.

    PubMed

    Kerr, Thomas; Oleson, Megan; Wood, Evan

    2004-08-01

    Due to the ongoing health crisis among injection drug users in Vancouver, Canada, there have been repeated calls for the establishment of safe injection sites (SISs) since the early 1990s. In April 2003, in response to a large-scale police crackdown and government inaction, a group of activists opened an unsanctioned SIS in Vancouver's Downtown Eastside (DTES). The 327 Carrall Street SIS operated for 181 days despite considerable police harassment and limited financial support. During the operation of the SIS, volunteers supervised over 3000 injections and demonstrated the feasibility of a user-run low-threshold SIS. The experience of the SIS provides valuable lessons for those seeking to advance the interests of injection drug users through community mobilization and direct action approaches. In this article, Thomas Kerr, Megan Oleson, and Evan Wood describe the events surrounding the establishment, operation, and closing of the unsanctioned SIS, and outline the lessons learned.

  6. Establishment of design criteria for acceptable failure modes and fail safe considerations for the space shuttle structural system

    NASA Technical Reports Server (NTRS)

    Westrup, R. W.

    1972-01-01

    Investigations of fatigue life, and safe-life and fail-safe design concepts as applied to space shuttle structure are summarized. The results are evaluated to select recommended structural design criteria to provide assurance that premature failure due to propagation of undetected crack-like defects will not occur during shuttle operational service. The space shuttle booster, GDC configuration B-9U, is selected as the reference vehicle. Structural elements used as basis of detail analyses include wing spar caps, vertical stabilizer skins, crew compartment skin, orbiter support frame, and propellant tank shell structure. Fatigue life analyses of structural elements are performed to define potential problem areas and establish upper limits of operating stresses. Flaw growth analyses are summarized in parametric form over a range of initial flaw types and sizes, operating stresses and service life requirements. Service life of 100 to 500 missions is considered.

  7. Robust Strategy for Rocket Engine Health Monitoring

    NASA Technical Reports Server (NTRS)

    Santi, L. Michael

    2001-01-01

    Monitoring the health of rocket engine systems is essentially a two-phase process. The acquisition phase involves sensing physical conditions at selected locations, converting physical inputs to electrical signals, conditioning the signals as appropriate to establish scale or filter interference, and recording results in a form that is easy to interpret. The inference phase involves analysis of results from the acquisition phase, comparison of analysis results to established health measures, and assessment of health indications. A variety of analytical tools may be employed in the inference phase of health monitoring. These tools can be separated into three broad categories: statistical, rule based, and model based. Statistical methods can provide excellent comparative measures of engine operating health. They require well-characterized data from an ensemble of "typical" engines, or "golden" data from a specific test assumed to define the operating norm in order to establish reliable comparative measures. Statistical methods are generally suitable for real-time health monitoring because they do not deal with the physical complexities of engine operation. The utility of statistical methods in rocket engine health monitoring is hindered by practical limits on the quantity and quality of available data. This is due to the difficulty and high cost of data acquisition, the limited number of available test engines, and the problem of simulating flight conditions in ground test facilities. In addition, statistical methods incur a penalty for disregarding flow complexity and are therefore limited in their ability to define performance shift causality. Rule based methods infer the health state of the engine system based on comparison of individual measurements or combinations of measurements with defined health norms or rules. This does not mean that rule based methods are necessarily simple. Although binary yes-no health assessment can sometimes be established by relatively simple rules, the causality assignment needed for refined health monitoring often requires an exceptionally complex rule base involving complicated logical maps. Structuring the rule system to be clear and unambiguous can be difficult, and the expert input required to maintain a large logic network and associated rule base can be prohibitive.

  8. The limits for life under multiple extremes.

    PubMed

    Harrison, Jesse P; Gheeraert, Nicolas; Tsigelnitskiy, Dmitry; Cockell, Charles S

    2013-04-01

    Life on Earth is limited by physical and chemical extremes that define the 'habitable space' within which it operates. Aside from its requirement for liquid water, no definite limits have been established for life under any extreme. Here, we employ growth data published for 67 prokaryotic strains to explore the limitations for microbial life under combined extremes of temperature, pH, salt (NaCl) concentrations, and pressure. Our review reveals a fundamental lack of information on the tolerance of microorganisms to multiple extremes that impedes several areas of science, ranging from environmental and industrial microbiology to the search for extraterrestrial life. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Organic rankine cycle waste heat applications

    DOEpatents

    Brasz, Joost J.; Biederman, Bruce P.

    2007-02-13

    A machine designed as a centrifugal compressor is applied as an organic rankine cycle turbine by operating the machine in reverse. In order to accommodate the higher pressures when operating as a turbine, a suitable refrigerant is chosen such that the pressures and temperatures are maintained within established limits. Such an adaptation of existing, relatively inexpensive equipment to an application that may be otherwise uneconomical, allows for the convenient and economical use of energy that would be otherwise lost by waste heat to the atmosphere.

  10. 75 FR 36589 - Financial Crimes Enforcement Network; Amendment to the Bank Secrecy Act Regulations-Definitions...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-28

    ... regulatory research into the operation of the prepaid industry, we have encountered a number of distinct...: (1) Establish written AML programs that are reasonably designed to prevent the MSB from being used to... limitations of descriptive terms are easily understood. The term ``stored value'' gained a foothold following...

  11. 40 CFR 63.2262 - How do I conduct performance tests and establish operating requirements?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... method detection limit is less than or equal to 1 parts per million by volume, dry basis (ppmvd..., percent (determined for reconstituted wood product presses and board coolers as required in Table 4 to... = capture efficiency, percent (determined for reconstituted wood product presses and board coolers as...

  12. 40 CFR 63.2262 - How do I conduct performance tests and establish operating requirements?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... method detection limit is less than or equal to 1 parts per million by volume, dry basis (ppmvd..., percent (determined for reconstituted wood product presses and board coolers as required in Table 4 to... = capture efficiency, percent (determined for reconstituted wood product presses and board coolers as...

  13. 40 CFR 63.2262 - How do I conduct performance tests and establish operating requirements?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... method detection limit is less than or equal to 1 parts per million by volume, dry basis (ppmvd..., percent (determined for reconstituted wood product presses and board coolers as required in Table 4 to... = capture efficiency, percent (determined for reconstituted wood product presses and board coolers as...

  14. 14 CFR 23.75 - Landing distance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to the 50 foot height and— (1) The steady approach must be at a gradient of descent not greater than... tests that a maximum steady approach gradient steeper than 5.2 percent, down to the 50-foot height, is safe. The gradient must be established as an operating limitation and the information necessary to...

  15. 40 CFR 63.8445 - How do I conduct performance tests and establish operating limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Brick and... mass emissions per unit of production for each test run using Equation 1 of this section: ER16MY03.000...

  16. A fluid model simulation of a simplified plasma limiter based on spectral-element time-domain method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Qian, Cheng; Ding, Dazhi, E-mail: dzding@njust.edu.cn; Fan, Zhenhong

    2015-03-15

    A simplified plasma limiter prototype is proposed and the fluid model coupled with Maxwell's equations is established to describe the operating mechanism of plasma limiter. A three-dimensional (3-D) simplified sandwich structure plasma limiter model is analyzed with the spectral-element time-domain (SETD) method. The field breakdown threshold of air and argon at different frequency is predicted and compared with the experimental data and there is a good agreement between them for gas microwave breakdown discharge problems. Numerical results demonstrate that the two-layer plasma limiter (plasma-slab-plasma) has better protective characteristics than a one-layer plasma limiter (slab-plasma-slab) with the same length of gasmore » chamber.« less

  17. Possible nutrient limiting factor in long term operation of closed aquatic ecosystem

    NASA Astrophysics Data System (ADS)

    Hao, Zongjie; Li, Yanhui; Cai, Wenkai; Wu, Peipei; Liu, Yongding; Wang, Gaohong

    2012-03-01

    To investigate nutrient limitation effect on the community metabolism of closed aquatic ecosystem and possible nutrient limiting factors in the experimental food chains, depletion of inorganic chemicals including carbon, nitrogen and phosphorous was tested. A closed aquatic ecosystem lab module consisting of Chlorella pyrenoidosa and Chlamydomonas reinhardtii, Daphnia magna and associated unidentified microbes was established. Closed ecological systems receive no carbon dioxide; therefore, we presumed carbon as a first limiting factor. The results showed that the algae population in the nutrient saturated group was statistically higher than that in the nutrient limited groups, and that the chlorophyll a content of algae in the phosphorus limited group was the highest among the limited groups. However, the nitrogen limited group supported the most Daphnia, followed by the carbon limited group, the nutrient saturated group and the phosphorus limited group. Redundancy analysis showed that the total phosphorus contents were correlated significantly with the population of algae, and that the amount of soluble carbohydrate as feedback of nutrient depletion was correlated with the number of Daphnia. Thus, these findings suggest that phosphorus is the limiting factor in the operation of closed aquatic ecosystem. The results presented herein have important indications for the future construction of long term closed ecological system.

  18. MPD thruster technology

    NASA Technical Reports Server (NTRS)

    Myers, Roger M.; Mantenieks, Maris A.; Lapointe, Michael R.

    1991-01-01

    MPD (MagnetoPlasmaDynamic) thrusters demonstrated between 2000 and 7000 seconds specific impulse at efficiencies approaching 40 percent, and were operated continuously at power levels over 500 kW. These demonstrated capabilities, combined with the simplicity and robustness of the thruster, make them attractive candidates for application to both unmanned and manned orbit raising, lunar, and planetary missions. To date, however, only a limited number of thruster configurations, propellants, and operating conditions were studied. The present status of MPD research is reviewed, including developments in the measured performance levels and electrode erosion rates. Theoretical studies of the thruster dynamics are also described. Significant progress was made in establishing empirical scaling laws, performance and lifetime limitations and in the development of numerical codes to simulate the flow field and electrode processes.

  19. Energy control strategy for a hybrid electric vehicle

    DOEpatents

    Phillips, Anthony Mark; Blankenship, John Richard; Bailey, Kathleen Ellen; Jankovic, Miroslava

    2002-08-27

    An energy control strategy (10) for a hybrid electric vehicle that controls an electric motor during bleed and charge modes of operation. The control strategy (10) establishes (12) a value of the power level at which the battery is to be charged. The power level is used to calculate (14) the torque to be commanded to the electric motor. The strategy (10) of the present invention identifies a transition region (22) for the electric motor's operation that is bounded by upper and lower speed limits. According to the present invention, the desired torque is calculated by applying equations to the regions before, during and after the transition region (22), the equations being a function of the power level and the predetermined limits and boundaries.

  20. Energy control strategy for a hybrid electric vehicle

    DOEpatents

    Phillips, Anthony Mark; Blankenship, John Richard; Bailey, Kathleen Ellen; Jankovic, Miroslava

    2002-01-01

    An energy control strategy (10) for a hybrid electric vehicle that controls an electric motor during bleed and charge modes of operation. The control strategy (10) establishes (12) a value of the power level at which the battery is to be charged. The power level is used to calculate (14) the torque to be commanded to the electric motor. The strategy (10) of the present invention identifies a transition region (22) for the electric motor's operation that is bounded by upper and lower speed limits. According to the present invention, the desired torque is calculated by applying equations to the regions before, during and after the transition region (22), the equations being a function of the power level and the predetermined limits and boundaries.

  1. Stalling of Helicopter Blades

    NASA Technical Reports Server (NTRS)

    Gustafson, F B; Myers, G C , Jr

    1946-01-01

    Theoretical studies have predicted that operation of helicopter rotor beyond certain combinations of thrust, forward speed, and rotational speed might be prevented by rapidly increasing stalling of the retreating blade. The same studies also indicate that the efficiency of the rotor will increase until these limits are reached or closely approached, so that it is desirable to design helicopter rotors for operation close to the limits imposed by blade stalling. Inasmuch as the theoretical predictions of blade stalling involve numerous approximations and assumptions, an experimental investigation was needed to determine whether, in actual practice, the stall did occur and spread as predicted and to establish the amount of stalling that could be present without severe vibration or control difficulties being introduced. This report presents the results of such an investigation.

  2. Catalytic ignition of hydrogen/oxygen

    NASA Technical Reports Server (NTRS)

    Green, James M.; Zurawski, Robert L.

    1988-01-01

    An experimental program was conducted to evaluate the catalytic ignition of gaseous hydrogen and oxygen. Shell 405 granular catalyst and a unique monolithic sponge catalyst were tested. Mixture ratio, mass flow rate, propellant inlet temperature, and back pressure were varied parametrically in testing to determine the operational limits of a catalytic igniter. The test results showed that the gaseous hydrogen/oxygen propellant combination can be ignited catalytically using Shell 405 catalyst over a wide range of mixture ratios, mass flow rates, and propellant injection temperatures. These operating conditions must be optimized to ensure reliable ignition for an extended period of time. The results of the experimental program and the established operational limits for a catalytic igniter using both the granular and monolithic catalysts are presented. The capabilities of a facility constructed to conduct the igniter testing and the advantages of a catalytic igniter over other ignition systems for gaseous hydrogen and oxygen are also discussed.

  3. Emerging Trends in the Management of Brain Metastases from Non-small Cell Lung Cancer.

    PubMed

    Churilla, Thomas M; Weiss, Stephanie E

    2018-05-07

    To summarize current approaches in the management of brain metastases from non-small cell lung cancer (NSCLC). Local treatment has evolved from whole-brain radiotherapy (WBRT) to increasing use of stereotactic radiosurgery (SRS) alone for patients with limited (1-4) brain metastases. Trials have established post-operative SRS as an alternative to adjuvant WBRT following resection of brain metastases. Second-generation TKIs for ALK rearranged NSCLC have demonstrated improved CNS penetration and activity. Current brain metastasis trials are focused on reducing cognitive toxicity: hippocampal sparing WBRT, SRS for 5-15 metastases, pre-operative SRS, and use of systemic targeted agents or immunotherapy. The role for radiotherapy in the management of brain metastases is becoming better defined with local treatment shifting from WBRT to SRS alone for limited brain metastases and post-operative SRS for resected metastases. Further trials are warranted to define the optimal integration of newer systemic agents with local therapies.

  4. National Laboratory Planning: Developing Sustainable Biocontainment Laboratories in Limited Resource Areas.

    PubMed

    Yeh, Kenneth B; Adams, Martin; Stamper, Paul D; Dasgupta, Debanjana; Hewson, Roger; Buck, Charles D; Richards, Allen L; Hay, John

    2016-01-01

    Strategic laboratory planning in limited resource areas is essential for addressing global health security issues. Establishing a national reference laboratory, especially one with BSL-3 or -4 biocontainment facilities, requires a heavy investment of resources, a multisectoral approach, and commitments from multiple stakeholders. We make the case for donor organizations and recipient partners to develop a comprehensive laboratory operations roadmap that addresses factors such as mission and roles, engaging national and political support, securing financial support, defining stakeholder involvement, fostering partnerships, and building trust. Successful development occurred with projects in African countries and in Azerbaijan, where strong leadership and a clear management framework have been key to success. A clearly identified and agreed management framework facilitate identifying the responsibility for developing laboratory capabilities and support services, including biosafety and biosecurity, quality assurance, equipment maintenance, supply chain establishment, staff certification and training, retention of human resources, and sustainable operating revenue. These capabilities and support services pose rate-limiting yet necessary challenges. Laboratory capabilities depend on mission and role, as determined by all stakeholders, and demonstrate the need for relevant metrics to monitor the success of the laboratory, including support for internal and external audits. Our analysis concludes that alternative frameworks for success exist for developing and implementing capabilities at regional and national levels in limited resource areas. Thus, achieving a balance for standardizing practices between local procedures and accepted international standards is a prerequisite for integrating new facilities into a country's existing public health infrastructure and into the overall international scientific community.

  5. A Program of Technical Assistance to Industry in Twenty-Six Mississippi Counties and the Choctaw Indian Reservation. Final Report.

    ERIC Educational Resources Information Center

    Phillips, Jane; Sewell, Charles

    A broad technical assistance program has been established in 25 EDA (Economic Development Administration) contract counties and on the Choctaw Indian Reservation Nashoba County) to stimulate new job opportunities by solving operational problems which limit the expansion and diversification of existing industry; professional services in evaluating…

  6. 40 CFR Table 2 to Subpart Sssss of... - Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... activity level of the catalyst at least every 12 months. 7. Each affected batch process unit For each batch... activity level of the catalyst at least every 12 months. 10. Each new kiln that is used to process clay... across the DLA at or above the minimum levels established during the most recent performance test; and b...

  7. 40 CFR Table 2 to Subpart Sssss of... - Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... activity level of the catalyst at least every 12 months. 7. Each affected batch process unit For each batch... activity level of the catalyst at least every 12 months. 10. Each new kiln that is used to process clay... across the DLA at or above the minimum levels established during the most recent performance test; and b...

  8. 40 CFR Table 8 to Subpart Sssss of... - Continuous Compliance with Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... activity level of the catalyst at least every 12 months and taking any necessary corrective action, such as... temperature measured during the most recent performance test; and vi. Checking the activity level of the... hopper. c. Maintain the limestone feeder setting at or above the level established during the most recent...

  9. 40 CFR 63.1571 - How and when do I conduct a performance test or other initial compliance demonstration?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... the option in paragraph (a)(1)(iii) in § 63.1564 (Ni lb/hr), and you use continuous parameter monitoring systems, you must establish an operating limit for the equilibrium catalyst Ni concentration based on the laboratory analysis of the equilibrium catalyst Ni concentration from the initial performance...

  10. 40 CFR 60.5181 - How do I establish an affirmative defense for exceedance of an emission limit or standard during...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ....5165, you may assert an affirmative defense to a claim for civil penalties for exceedances of emission... malfunction event at issue. The analysis shall also specify, using best monitoring methods and engineering... an affirmative defense to civil penalties for that malfunction. The owner or operator seeking to...

  11. 40 CFR 60.5181 - How do I establish an affirmative defense for exceedance of an emission limit or standard during...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ....5165, you may assert an affirmative defense to a claim for civil penalties for exceedances of emission... malfunction event at issue. The analysis shall also specify, using best monitoring methods and engineering... an affirmative defense to civil penalties for that malfunction. The owner or operator seeking to...

  12. 40 CFR Table 4 to Subpart Dddd of... - Requirements for Performance Tests

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... THC compliance option measure emissions of total HAP as THC Method 25A in appendix A to 40 CFR part 60... the methane emissions from the emissions of total HAP as THC. (6) each process unit subject to a... § 63.2240(c) establish the site-specific operating requirements (including the parameter limits or THC...

  13. 40 CFR Table 4 to Subpart Dddd of... - Requirements for Performance Tests

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... THC compliance option measure emissions of total HAP as THC Method 25A in appendix A to 40 CFR part 60... the methane emissions from the emissions of total HAP as THC. (6) each process unit subject to a... § 63.2240(c) establish the site-specific operating requirements (including the parameter limits or THC...

  14. Challenges in the Establishment of a New Faculty: Experiences of the Founding Deans and Faculty Members

    ERIC Educational Resources Information Center

    Vatanartiran, Sinem

    2013-01-01

    Problem Statement: Academic deans play a critical role connecting academic and administrative operations and structures within their respective Faculties and universities. There is a wide array of research about deans, what they do, their leadership skills, challenges, and experiences. However, the research is quite limited in terms of the…

  15. 40 CFR Table 2 to Subpart Jjjjj of... - Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Kiln equipped with a WS a. Maintain the average scrubber pressure drop for each 3-hour block period at... average scrubber liquid pH for each 3-hour block period at or above the average scrubber liquid pH established during the performance test; and c. Maintain the average scrubber liquid flow rate for each 3-hour...

  16. 40 CFR Table 2 to Subpart Jjjjj of... - Operating Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... Kiln equipped with a WS a. Maintain the average scrubber pressure drop for each 3-hour block period at... average scrubber liquid pH for each 3-hour block period at or above the average scrubber liquid pH established during the performance test; and c. Maintain the average scrubber liquid flow rate for each 3-hour...

  17. Formative evaluation of an Inspection Certificate Program (ICP) pilot in Toronto.

    PubMed

    Dwyer, J J; Komorowski, C; Ruf, F

    1999-01-01

    The inspection certificate program consists of food establishments voluntarily posting a certificate to inform patrons that inspection reports can be accessed from operators or the public health department. A three-month pilot program was evaluated for program improvement purposes. Only 65% of the selected operators were willing to participate, which suggests a challenge to fully implementing the program. Thirty-nine randomly selected restaurant operators participated. Most operators posted the certificate at the front entrance, and patrons indicated that reports were clear. Operators were supportive of the program. Some operators reported that the program was good for business and offered suggestions to improve it. A total of 583 requests for reports were made which suggests that the program empowered patrons to request reports, mostly from operators. Most patron evaluation forms came from a few operators that had no deficiencies, which limits generalizability.

  18. Incentive-Based Voltage Regulation in Distribution Networks: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, Xinyang; Chen, Lijun; Dall'Anese, Emiliano

    This paper considers distribution networks fea- turing distributed energy resources, and designs incentive-based mechanisms that allow the network operator and end-customers to pursue given operational and economic objectives, while concurrently ensuring that voltages are within prescribed limits. Two different network-customer coordination mechanisms that require different amounts of information shared between the network operator and end-customers are developed to identify a solution of a well-defined social-welfare maximization prob- lem. Notably, the signals broadcast by the network operator assume the connotation of prices/incentives that induce the end- customers to adjust the generated/consumed powers in order to avoid the violation of the voltagemore » constraints. Stability of the proposed schemes is analytically established and numerically corroborated.« less

  19. Incentive-Based Voltage Regulation in Distribution Networks

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dall-Anese, Emiliano; Baker, Kyri A; Zhou, Xinyang

    This paper considers distribution networks fea- turing distributed energy resources, and designs incentive-based mechanisms that allow the network operator and end-customers to pursue given operational and economic objectives, while concurrently ensuring that voltages are within prescribed limits. Two different network-customer coordination mechanisms that require different amounts of information shared between the network operator and end-customers are developed to identify a solution of a well-defined social-welfare maximization prob- lem. Notably, the signals broadcast by the network operator assume the connotation of prices/incentives that induce the end- customers to adjust the generated/consumed powers in order to avoid the violation of the voltagemore » constraints. Stability of the proposed schemes is analytically established and numerically corroborated.« less

  20. Fuel cell technology program

    NASA Technical Reports Server (NTRS)

    1972-01-01

    A fuel cell technology program was established to advance the state-of-the art of hydrogen oxygen fuel cells using low temperature, potassium hydroxide electrolyte technology as the base. Cell and component testing confirmed that low temperature, potassium hydroxide electrolyte technology is compatible with the requirements of the space shuttle Phase B contractors. Testing of the DM-1 powerplant demonstrated all of the important requirements of the shuttle except operating life. Testing also identified DM-1 powerplant life limiting mechanisms; hydrogen pump gear wear and pressurization of the cell stack over its design limits.

  1. Operational limit conditions of the spur gears in lubricated modes

    NASA Astrophysics Data System (ADS)

    Benilha, S.; Belarifi, F.

    2018-01-01

    The calculation of the gear teeth resistance, shows the using of a certain number of coefficients determined experimentally and which are accepted by the various international standards. However, this kind of calculation determines the gears by excess material and does not support the tribological parameters of operation. We propose in this work the support of these parameters, to determine the limit operation conditions of the spur gears, using the equivalent geometry. This is represented by two cylinders, which geometrically models of the contact between two teeth of a gear and whose lubrication is generally in mixed lubrication mode. The concept of Mc cool is used to determine the distribution of the load and the friction force, which are distributed in liquid (elastohydrodynamic) and solid domains and interact with each other. The phenomenon of interaction between the two domains is used, to predict the tribological limit conditions of operation. The proposed model is based on the resolution of elastohydrodynamic equations for the determination of load and friction as well as the deduction of mixed friction by tracing the Stribeck curve. This is calculated by the model of the decomposition of the patterns profile of rough surfaces in contacts. The results of non-dimensional calculations allow us to deduce the boundary conditions and can be adapted for any type of gear pair defined according to pre-established operating conditions.

  2. 40 CFR Table 4 to Subpart Dddd of... - Requirements for Performance Tests

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... HAP as THC compliance option measure emissions of total HAP as THC Method 25A in appendix A to 40 CFR... subtract the methane emissions from the emissions of total HAP as THC. (6) each process unit subject to a... § 63.2240(c) establish the site-specific operating requirements (including the parameter limits or THC...

  3. 40 CFR Table 4 to Subpart Dddd of... - Requirements for Performance Tests

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... HAP as THC compliance option measure emissions of total HAP as THC Method 25A in appendix A to 40 CFR... subtract the methane emissions from the emissions of total HAP as THC. (6) each process unit subject to a... § 63.2240(c) establish the site-specific operating requirements (including the parameter limits or THC...

  4. 40 CFR Table 4 to Subpart Dddd of... - Requirements for Performance Tests

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... HAP as THC compliance option measure emissions of total HAP as THC Method 25A in appendix A to 40 CFR... subtract the methane emissions from the emissions of total HAP as THC. (6) each process unit subject to a... § 63.2240(c) establish the site-specific operating requirements (including the parameter limits or THC...

  5. 40 CFR 63.4567 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products Compliance Requirements for the... procedures. If problems are found during the catalyst activity test, you must replace the catalyst bed or... inspection of the catalytic oxidizer system, including the burner assembly and fuel supply lines for problems...

  6. 40 CFR 63.4567 - How do I establish the emission capture system and add-on control device operating limits during...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products Compliance Requirements for the... procedures. If problems are found during the catalyst activity test, you must replace the catalyst bed or... inspection of the catalytic oxidizer system, including the burner assembly and fuel supply lines for problems...

  7. Medicare program; Medicare hospital reimbursement reforms: limitations on reimbursable costs and the rate of hospital cost increases--HCFA. Interim final rule with comment period.

    PubMed

    1982-09-30

    These rules implement section 1886 of the Social Security Act (established by section 101 of the Tax Equity and Fiscal Responsibility Act of 1982). These rules amend current regulations on hospital cost limits, providing for new exemptions and exceptions. These amendments make exceptions available to hospitals consistent with the new cost limits published elsewhere in this issue of the Federal Register, and specifically exempt from those cost limits rural hospitals with less than 50 beds in existence as of the enactment of the law. These rules also set forth new regulations establishing a three-year ceiling on the allowable annual rate of increase in operating costs per case for inpatient hospital services. This ceiling takes the form of a target amount of cost per case against which a hospital's incurred cost per case will be compared. Hospitals are provided incentives to keep their cost increases below the target rate. A hospital that has costs per case less than the target amount will be paid a portion of the difference between actual cost and the target amount. A hospital that has costs per case that are greater than the target amount will be paid the target amount plus 25 percent of its costs in excess of the target for the first two years of the ceiling, and none of the excess in the third year. However, payment to a hospital under these new target rate regulations will not be greater than the amount determined under the new schedule of limits on hospital inpatient operating costs published elsewhere in this issue of the Federal Register.

  8. Visibility monitoring in the southern California desert for the Department of Defense: Research on operations-limiting visual extinction, RESOLVE protocol

    NASA Astrophysics Data System (ADS)

    Blumenthal, D.; Trijonis, J.

    1984-09-01

    A decrease in visibility in the R2508 airspace (in the western Mojave Desert in southern California) since the mid-1940s, when flight test and training facilities were established in this region, is adversely affecting flight and test operations. The Joint Policy and Planning Board (JPPB) of the Department of Defense has initiated studies and discussions of the visibility issue with the goal of developing a management strategy to maintain and optimize the operational capabilities of the test facilities. To identify trends in and sources of visibility degradation in the desert, JPPB initiated two programs: (1) a compilation and review of the historical visibility and air quality data in the California desert region, to be coordinated by the California Desert Air Working Group (CDAWG) and funded by CDAWG participants; and (2) RESearch on Operations-Limiting Visual Extinction (RESOLVE), which involves measuring the visibility at key receptor sites (monitoring stations) in the R2508 region. The report describes the current status of and future plans for the RESOLVE program.

  9. Reversible electron-hole separation in a hot carrier solar cell

    NASA Astrophysics Data System (ADS)

    Limpert, S.; Bremner, S.; Linke, H.

    2015-09-01

    Hot-carrier solar cells are envisioned to utilize energy filtering to extract power from photogenerated electron-hole pairs before they thermalize with the lattice, and thus potentially offer higher power conversion efficiency compared to conventional, single absorber solar cells. The efficiency of hot-carrier solar cells can be expected to strongly depend on the details of the energy filtering process, a relationship which to date has not been satisfactorily explored. Here, we establish the conditions under which electron-hole separation in hot-carrier solar cells can occur reversibly, that is, at maximum energy conversion efficiency. We thus focus our analysis on the internal operation of the hot-carrier solar cell itself, and in this work do not consider the photon-mediated coupling to the Sun. After deriving an expression for the voltage of a hot-carrier solar cell valid under conditions of both reversible and irreversible electrical operation, we identify separate contributions to the voltage from the thermoelectric effect and the photovoltaic effect. We find that, under specific conditions, the energy conversion efficiency of a hot-carrier solar cell can exceed the Carnot limit set by the intra-device temperature gradient alone, due to the additional contribution of the quasi-Fermi level splitting in the absorber. We also establish that the open-circuit voltage of a hot-carrier solar cell is not limited by the band gap of the absorber, due to the additional thermoelectric contribution to the voltage. Additionally, we find that a hot-carrier solar cell can be operated in reverse as a thermally driven solid-state light emitter. Our results help explore the fundamental limitations of hot-carrier solar cells, and provide a first step towards providing experimentalists with a guide to the optimal configuration of devices.

  10. Noise of two high-speed model counter-rotation propellers at takeoff/approach conditions

    NASA Astrophysics Data System (ADS)

    Woodward, Richard P.

    1992-08-01

    This paper presents acoustic results for two model counter-rotation propellers which were tested in the NASA Lewis 9- x 15-ft Anechoic Wind Tunnel. The propellers had a common forward rotor, but the diameter of the aft rotor of the second propeller was reduced in an effort to reduce its interaction with the forward rotor tip vortex. The propellers were tested at Mach 0.20, which is representative of takeoff/approach operation. Acoustic results are presented for these propellers which show the effect of rotor spacing, reduced aft rotor diameter, operation at angle-of-attack, blade loading, and blade number. Limited aerodynamic results are also presented to establish the propeller operating conditions.

  11. Noise of two high-speed model counter-rotation propellers at takeoff/approach conditions

    NASA Technical Reports Server (NTRS)

    Woodward, Richard P.

    1992-01-01

    This paper presents acoustic results for two model counter-rotation propellers which were tested in the NASA Lewis 9- x 15-ft Anechoic Wind Tunnel. The propellers had a common forward rotor, but the diameter of the aft rotor of the second propeller was reduced in an effort to reduce its interaction with the forward rotor tip vortex. The propellers were tested at Mach 0.20, which is representative of takeoff/approach operation. Acoustic results are presented for these propellers which show the effect of rotor spacing, reduced aft rotor diameter, operation at angle-of-attack, blade loading, and blade number. Limited aerodynamic results are also presented to establish the propeller operating conditions.

  12. National Laboratory Planning: Developing Sustainable Biocontainment Laboratories in Limited Resource Areas

    PubMed Central

    Adams, Martin; Stamper, Paul D.; Dasgupta, Debanjana; Hewson, Roger; Buck, Charles D.; Richards, Allen L.; Hay, John

    2016-01-01

    Strategic laboratory planning in limited resource areas is essential for addressing global health security issues. Establishing a national reference laboratory, especially one with BSL-3 or -4 biocontainment facilities, requires a heavy investment of resources, a multisectoral approach, and commitments from multiple stakeholders. We make the case for donor organizations and recipient partners to develop a comprehensive laboratory operations roadmap that addresses factors such as mission and roles, engaging national and political support, securing financial support, defining stakeholder involvement, fostering partnerships, and building trust. Successful development occurred with projects in African countries and in Azerbaijan, where strong leadership and a clear management framework have been key to success. A clearly identified and agreed management framework facilitate identifying the responsibility for developing laboratory capabilities and support services, including biosafety and biosecurity, quality assurance, equipment maintenance, supply chain establishment, staff certification and training, retention of human resources, and sustainable operating revenue. These capabilities and support services pose rate-limiting yet necessary challenges. Laboratory capabilities depend on mission and role, as determined by all stakeholders, and demonstrate the need for relevant metrics to monitor the success of the laboratory, including support for internal and external audits. Our analysis concludes that alternative frameworks for success exist for developing and implementing capabilities at regional and national levels in limited resource areas. Thus, achieving a balance for standardizing practices between local procedures and accepted international standards is a prerequisite for integrating new facilities into a country's existing public health infrastructure and into the overall international scientific community. PMID:27559843

  13. 75 FR 4745 - Approval and Promulgation of Implementation Plans, State of California, San Joaquin Valley...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-29

    ...Under section 110(k)(6) of the Clean Air Act, EPA is proposing to correct our May 2004 final approval of revisions to the San Joaquin Valley Unified Air Pollution Control District portion of the California State Implementation Plan. EPA is also proposing to take action on three amended District rules, one of which was submitted on March 7, 2008 and the other two of which were submitted on March 17, 2009. Two of the submitted rules reflect revisions to approved District rules that provide for review of new and modified stationary sources (``new source review'' or NSR) within the District, and the third reflects revisions to an approved District rule that provides a mechanism by which existing stationary sources may be exempt from the requirement to secure a Federally-mandated operating permit. The NSR rule revisions relate to exemptions from permitting and from offsets for certain agricultural operations, to the establishment of NSR applicability and offset thresholds consistent with a classification of ``extreme'' nonattainment for the ozone standard, and to the implementation of EPA's NSR Reform Rules. With respect to the revised District NSR rules, EPA is proposing a limited approval and limited disapproval because, although the changes would strengthen the SIP, there are deficiencies in enforceability that prevent full approval. With respect to the operating permit rule, EPA is proposing a full approval. Lastly, EPA is proposing to rescind certain obsolete permitting requirements from the District portion of the California plan. If EPA were to finalize the limited approval and limited disapproval action, as proposed, then a sanctions clock, and EPA's obligation to promulgate a Federal implementation plan, would be triggered because certain revisions to the District rules that are the subject of this action are required under anti-backsliding principles established for the transition from the 1-hour to the 8-hour ozone standard.

  14. Task 2 - Limits for High-Frequency Conducted Susceptibility Testing - CS114 (NRC-HQ-60-14-D-0015)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wood, Richard Thomas; Ewing, Paul D.; Moses, Rebecca J.

    2015-09-01

    A principal focus of Task 2 under this project was for ORNL to evaluate the basis for susceptibility testing against high-frequency conducted interference and to establish recommendations to resolve concerns about the severity of test limits for the conducted susceptibility (CS) test, CS114, from MIL-STD-461. The primary concern about the test limit has been characterized by the EPRI EMI Working Group in the following terms: Demonstrating compliance with the CS114 test limits recommended in TR-102323 has proven to be problematic, even for components that have been tested to commercial standards and demonstrated proper operation in industrial applications [6]. Specifically, EPRImore » notes that the CS114 limits approved in regulatory documents are significantly higher than those invoked by the US military and similar commercial standards in the frequency range below 200 kHz. For this task, ORNL evaluated the original approach to establishing the test limit, EPRI technical findings from a review of the limit, and the regulatory basis through which the currently approved limits were accepted. Based on this analysis, strategies have been developed regarding changes to the CS114 limit that can resolve the technical concerns raised by the industry. Guided by the principles that reasonable assurance of safety must not be compromised but excessive conservatism should be reduced, recommendations on a suitable basis for a revised limit have been developed and can be incorporated into the planned Revision 2 of RG 1.180.« less

  15. Satellite Power Systems (SPS) concept definition study. Volume 5: Special emphasis studies. [rectenna and solar power satellite design studies

    NASA Technical Reports Server (NTRS)

    Hanley, G. M.

    1980-01-01

    Satellite configurations based on the Satellite Power System baseline requirements were analyzed and a preferred concept selected. A satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Rectenna construction requirement were also addressed. Mass flow to orbit requirements were revised and traffic models established based on construction of 60 instead of 120 satellites. Analyses were conducted to determine satellite control, resources, manufacturing, and propellant requirements. The impact of the laser beam used for space-to-Earth power transmission upon the intervening atmosphere was examined as well as the inverse effect. The significant space environments and their effects on spacecraft components were investigated to define the design and operational limits imposed by the environments on an orbit transfer vehicle. The results show that LEO altitude 300 nmi and transfer orbit duration 6 months are preferrable.

  16. Cycling excitation process: An ultra efficient and quiet signal amplification mechanism in semiconductor

    NASA Astrophysics Data System (ADS)

    Liu, Yu-Hsin; Yan, Lujiang; Zhang, Alex Ce; Hall, David; Niaz, Iftikhar Ahmad; Zhou, Yuchun; Sham, L. J.; Lo, Yu-Hwa

    2015-08-01

    Signal amplification, performed by transistor amplifiers with its merit rated by the efficiency and noise characteristics, is ubiquitous in all electronic systems. Because of transistor thermal noise, an intrinsic signal amplification mechanism, impact ionization was sought after to complement the limits of transistor amplifiers. However, due to the high operation voltage (30-200 V typically), low power efficiency, limited scalability, and, above all, rapidly increasing excess noise with amplification factor, impact ionization has been out of favor for most electronic systems except for a few applications such as avalanche photodetectors and single-photon Geiger detectors. Here, we report an internal signal amplification mechanism based on the principle of the phonon-assisted cycling excitation process (CEP). Si devices using this concept show ultrahigh gain, low operation voltage, CMOS compatibility, and, above all, quantum limit noise performance that is 30 times lower than devices using impact ionization. Established on a unique physical effect of attractive properties, CEP-based devices can potentially revolutionize the fields of semiconductor electronics.

  17. Optimum testing of multiple hypotheses in quantum detection theory

    NASA Technical Reports Server (NTRS)

    Yuen, H. P.; Kennedy, R. S.; Lax, M.

    1975-01-01

    The problem of specifying the optimum quantum detector in multiple hypotheses testing is considered for application to optical communications. The quantum digital detection problem is formulated as a linear programming problem on an infinite-dimensional space. A necessary and sufficient condition is derived by the application of a general duality theorem specifying the optimum detector in terms of a set of linear operator equations and inequalities. Existence of the optimum quantum detector is also established. The optimality of commuting detection operators is discussed in some examples. The structure and performance of the optimal receiver are derived for the quantum detection of narrow-band coherent orthogonal and simplex signals. It is shown that modal photon counting is asymptotically optimum in the limit of a large signaling alphabet and that the capacity goes to infinity in the absence of a bandwidth limitation.

  18. 78 FR 43148 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-19

    .... Section 101(a)(5)(D) establishes a 45-day time limit for NMFS review of an application followed by a 30... concurrently and only one impact hammer rig was operated at a time. Due to delays in beginning construction..., Coleman, 2011, Caltrans, 2012). The variability in attenuation levels is due to variation in design, as...

  19. Journal Article: Average Method Blank Quantities of Dioxin-Like Congeners and Their Relationship to the Detection Limits of the U.S. EPA's National Dioxin Air Monitoring Network (Ndamn)

    EPA Science Inventory

    The U.S. EPA established a National Dioxin Air Monitoring Network (NDAMN) to determine the temporal and geographical variability of atmospheric CDDs, CDFs and coplanar PCBs throughout the United States. Currently operating at 33 stations, NDAMN has, as one of its tasks, the dete...

  20. 40 CFR 63.4363 - How do I establish the add-on control device operating limits during the performance test?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... performance test, you must monitor and record the temperature at the inlet to the catalyst bed and the temperature difference across the catalyst bed at least once every 15 minutes during each of the three test... temperature at the inlet to the catalyst bed and the average temperature difference across the catalyst bed...

  1. A model for preemptive maintenance of medical linear accelerators-predictive maintenance.

    PubMed

    Able, Charles M; Baydush, Alan H; Nguyen, Callistus; Gersh, Jacob; Ndlovu, Alois; Rebo, Igor; Booth, Jeremy; Perez, Mario; Sintay, Benjamin; Munley, Michael T

    2016-03-10

    Unscheduled accelerator downtime can negatively impact the quality of life of patients during their struggle against cancer. Currently digital data accumulated in the accelerator system is not being exploited in a systematic manner to assist in more efficient deployment of service engineering resources. The purpose of this study is to develop an effective process for detecting unexpected deviations in accelerator system operating parameters and/or performance that predicts component failure or system dysfunction and allows maintenance to be performed prior to the actuation of interlocks. The proposed predictive maintenance (PdM) model is as follows: 1) deliver a daily quality assurance (QA) treatment; 2) automatically transfer and interrogate the resulting log files; 3) once baselines are established, subject daily operating and performance values to statistical process control (SPC) analysis; 4) determine if any alarms have been triggered; and 5) alert facility and system service engineers. A robust volumetric modulated arc QA treatment is delivered to establish mean operating values and perform continuous sampling and monitoring using SPC methodology. Chart limits are calculated using a hybrid technique that includes the use of the standard SPC 3σ limits and an empirical factor based on the parameter/system specification. There are 7 accelerators currently under active surveillance. Currently 45 parameters plus each MLC leaf (120) are analyzed using Individual and Moving Range (I/MR) charts. The initial warning and alarm rule is as follows: warning (2 out of 3 consecutive values ≥ 2σ hybrid) and alarm (2 out of 3 consecutive values or 3 out of 5 consecutive values ≥ 3σ hybrid). A customized graphical user interface provides a means to review the SPC charts for each parameter and a visual color code to alert the reviewer of parameter status. Forty-five synthetic errors/changes were introduced to test the effectiveness of our initial chart limits. Forty-three of the forty-five errors (95.6 %) were detected in either the I or MR chart for each of the subsystems monitored. Our PdM model shows promise in providing a means for reducing unscheduled downtime. Long term monitoring will be required to establish the effectiveness of the model.

  2. The space shuttle payload planning working groups. Volume 7: Earth observations

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The findings of the Earth Observations working group of the space shuttle payload planning activity are presented. The objectives of the Earth Observation experiments are: (1) establishment of quantitative relationships between observable parameters and geophysical variables, (2) development, test, calibration, and evaluation of eventual flight instruments in experimental space flight missions, (3) demonstration of the operational utility of specific observation concepts or techniques as information inputs needed for taking actions, and (4) deployment of prototype and follow-on operational Earth Observation systems. The basic payload capability, mission duration, launch sites, inclinations, and payload limitations are defined.

  3. One-Shot Coherence Dilution.

    PubMed

    Zhao, Qi; Liu, Yunchao; Yuan, Xiao; Chitambar, Eric; Ma, Xiongfeng

    2018-02-16

    Manipulation and quantification of quantum resources are fundamental problems in quantum physics. In the asymptotic limit, coherence distillation and dilution have been proposed by manipulating infinite identical copies of states. In the nonasymptotic setting, finite data-size effects emerge, and the practically relevant problem of coherence manipulation using finite resources has been left open. This Letter establishes the one-shot theory of coherence dilution, which involves converting maximally coherent states into an arbitrary quantum state using maximally incoherent operations, dephasing-covariant incoherent operations, incoherent operations, or strictly incoherent operations. We introduce several coherence monotones with concrete operational interpretations that estimate the one-shot coherence cost-the minimum amount of maximally coherent states needed for faithful coherence dilution. Furthermore, we derive the asymptotic coherence dilution results with maximally incoherent operations, incoherent operations, and strictly incoherent operations as special cases. Our result can be applied in the analyses of quantum information processing tasks that exploit coherence as resources, such as quantum key distribution and random number generation.

  4. One-Shot Coherence Dilution

    NASA Astrophysics Data System (ADS)

    Zhao, Qi; Liu, Yunchao; Yuan, Xiao; Chitambar, Eric; Ma, Xiongfeng

    2018-02-01

    Manipulation and quantification of quantum resources are fundamental problems in quantum physics. In the asymptotic limit, coherence distillation and dilution have been proposed by manipulating infinite identical copies of states. In the nonasymptotic setting, finite data-size effects emerge, and the practically relevant problem of coherence manipulation using finite resources has been left open. This Letter establishes the one-shot theory of coherence dilution, which involves converting maximally coherent states into an arbitrary quantum state using maximally incoherent operations, dephasing-covariant incoherent operations, incoherent operations, or strictly incoherent operations. We introduce several coherence monotones with concrete operational interpretations that estimate the one-shot coherence cost—the minimum amount of maximally coherent states needed for faithful coherence dilution. Furthermore, we derive the asymptotic coherence dilution results with maximally incoherent operations, incoherent operations, and strictly incoherent operations as special cases. Our result can be applied in the analyses of quantum information processing tasks that exploit coherence as resources, such as quantum key distribution and random number generation.

  5. Impact of cell design and operating conditions on the performances of SOFC fuelled with methane

    NASA Astrophysics Data System (ADS)

    Laurencin, J.; Lefebvre-Joud, F.; Delette, G.

    An in-house-model has been developed to study the thermal and electrochemical behaviour of a planar SOFC fed directly with methane and incorporated in a boiler. The usual Ni-YSZ cermet has been considered for the anode material. It has been found that methane reforming into hydrogen occurs only at the cell inlet in a limited depth within the anode. A sensitivity analysis has allowed establishing that anode thicknesses higher than ∼400-500 μm are required to achieve both the optimal methane conversion and electrochemical performances. The direct internal reforming (DIR) mechanisms and the impact of operating conditions on temperature gradients and SOFC electrical efficiencies have been investigated considering the anode supported cell configuration. It has been shown that the temperature gradient is minimised in the autothermal mode of cell operation. Thermal equilibrium in the stack has been found to be strongly dependent on radiative heat losses with the stack envelope. Electrochemical performance and cell temperature maps have been established as a function of methane flow rates and cell voltages.

  6. Dynamics of microbial growth and metabolic activity and their control by aeration.

    PubMed

    Kalina, V

    1993-01-01

    The optimization of fermentation processes depends to a large extent on the modelling of microbial activity under complex environmental conditions where aeration is an important limiting and control factor. Simple relationships are used to establish the sensitivity of cultures to oxygen stress. Specific limitation coefficients which can be determined in laboratory reactors allow a projection to industrial operation and the definition of appropriate aeration and agitation profiles. Optimum control can be assured on the basis of directly measurable process parameters. This is shown for the case of ethanol production using S. cerevisiae at high cell dry weight concentrations.

  7. Evaluation of Fast Switching Diode 1N4448 Over a Wide Temperature Range

    NASA Technical Reports Server (NTRS)

    Boomer, Kristen; Damron, James; Gray, Josh; Hammoud, Ahmad

    2017-01-01

    Electronic parts used in the design of power systems geared for space applications are often exposed to extreme temperatures and thermal cycling. Limited data exist on the performance and reliability of commercial-off-the-shelf (COTS) electronic parts at temperatures beyond the manufacturers specified operating temperature range. This report summarizes preliminary results obtained on the evaluation of automotive-grade, fast switching diodes over a wide temperature range and thermal cycling. The investigations were carried out to establish a baseline on functionality of these diodes and to determine suitability for use outside their recommended temperature limits.

  8. Two gimbal bearing case studies: Some lessons learned

    NASA Technical Reports Server (NTRS)

    Loewenthal, Stuart H.

    1988-01-01

    Two troublesome, torque related problems associated with gimbal actuators are discussed. Large, thin section angular contact bearings can have a surprisingly high torque sensitivity to radial thermal gradients. A predictive thermal-mechanical bearing analysis, as described, was helpful in establishing a safe temperature operating envelope. In the second example, end-of-travel torque limits of an oscillatory gimbal bearing appoached motor stall during limit cycling life tests. Bearing modifications required to restore acceptable torque performance are described. The lessons learned from these case studies should benefit designers of precision gimbals where singular bearing torque related problems are not uncommon.

  9. Finite Progressive Planning for the Assembly Process in Footwear

    NASA Astrophysics Data System (ADS)

    Reyes, John; Aldás, Darwin; Salazar, Edisson; Armendáriz, Evelyn; Álvarez, Kevin; Núñez, José; García, Mario

    2017-06-01

    The scheduling of the operations of a manufacturing system is recognized for its efficiency in establishing a characteristic rate of production based on the forecasting of the ending date of an order. However, progressive planning focused on the footwear industries has not been studied in detail, since it is limited by the use of machines and supply according to the demand of the production line, whose development is based on just in time. The study proposes a finite progressive planning model in the area of footwear assembly that begins with analysis of the demand and identification of manufacturing constraints in order to establish an optimal ordering sequence. The results show manufacturing requirements through production orders that automatically determine production shifts per order, through experimentation of scenarios, the 25% increase in productivity indicators and a 31% improvement in efficiency are established. This improvement represents higher benefits for the industrial sector when establishing planning in the workplace.

  10. On the dynamical and geometrical symmetries of Keplerian motion

    NASA Astrophysics Data System (ADS)

    Wulfman, Carl E.

    2009-05-01

    The dynamical symmetries of classical, relativistic and quantum-mechanical Kepler systems are considered to arise from geometric symmetries in PQET phase space. To establish their interconnection, the symmetries are related with the aid of a Lie-algebraic extension of Dirac's correspondence principle, a canonical transformation containing a Cunningham-Bateman inversion, and a classical limit involving a preliminary canonical transformation in ET space. The Lie-algebraic extension establishes the conditions under which the uncertainty principle allows the local dynamical symmetry of a quantum-mechanical system to be the same as the geometrical phase-space symmetry of its classical counterpart. The canonical transformation converts Poincaré-invariant free-particle systems into ISO(3,1) invariant relativistic systems whose classical limit produces Keplerian systems. Locally Cartesian relativistic PQET coordinates are converted into a set of eight conjugate position and momentum coordinates whose classical limit contains Fock projective momentum coordinates and the components of Runge-Lenz vectors. The coordinate systems developed via the transformations are those in which the evolution and degeneracy groups of the classical system are generated by Poisson-bracket operators that produce ordinary rotation, translation and hyperbolic motions in phase space. The way in which these define classical Keplerian symmetries and symmetry coordinates is detailed. It is shown that for each value of the energy of a Keplerian system, the Poisson-bracket operators determine two invariant functions of positions and momenta, which together with its regularized Hamiltonian, define the manifold in six-dimensional phase space upon which motions evolve.

  11. CO2 on the International Space Station: An Operations Update

    NASA Technical Reports Server (NTRS)

    Law, Jennifer; Alexander, David

    2016-01-01

    PROBLEM STATEMENT: We describe CO2 symptoms that have been reported recently by crewmembers on the International Space Station and our continuing efforts to control CO2 to lower levels than historically accepted. BACKGROUND: Throughout the International Space Station (ISS) program, anecdotal reports have suggested that crewmembers develop CO2-related symptoms at lower CO2 levels than would be expected terrestrially. Since 2010, operational limits have controlled the 24-hour average CO2 to 4.0 mm Hg, or below as driven by crew symptomatology. In recent years, largely due to increasing awareness by crew and ground team, there have been increased reports of crew symptoms. The aim of this presentation is to discuss recent observations and operational impacts to lower CO2 levels on the ISS. CASE PRESENTATION: Crewmembers are routinely asked about CO2 symptoms in their weekly private medical conferences with their crew surgeons. In recent ISS expeditions, crewmembers have noted symptoms attributable to CO2 starting at 2.3 mmHg. Between 2.3 - 2.7 mm Hg, fatigue and full-headedness have been reported. Between 2.7 - 3.0 mm Hg, there have been self-reports of procedure missed steps or procedures going long. Above 3.0 - 3.4 mm Hg, headaches have been reported. A wide range of inter- and intra-individual variability in sensitivity to CO2 have been noted. OPERATIONAL / CLINICAL RELEVANCE: These preliminary data provide semi-quantitative ranges that have been used to inform a new operational limit of 3.0 mmHg as a compromise between systems capabilities and the recognition that there are human health and performance impacts at recent ISS CO2 levels. Current evidence would suggest that an operational limit between 0.5 and 2.0 mm Hg may maintain health and performance. Future work is needed to establish long-term ISS and future vehicle operational limits.

  12. IT Operational Risk Measurement Model Based on Internal Loss Data of Banks

    NASA Astrophysics Data System (ADS)

    Hao, Xiaoling

    Business operation of banks relies increasingly on information technology (IT) and the most important role of IT is to guarantee the operational continuity of business process. Therefore, IT Risk management efforts need to be seen from the perspective of operational continuity. Traditional IT risk studies focused on IT asset-based risk analysis and risk-matrix based qualitative risk evaluation. In practice, IT risk management practices of banking industry are still limited to the IT department and aren't integrated into business risk management, which causes the two departments to work in isolation. This paper presents an improved methodology for dealing with IT operational risk. It adopts quantitative measurement method, based on the internal business loss data about IT events, and uses Monte Carlo simulation to predict the potential losses. We establish the correlation between the IT resources and business processes to make sure risk management of IT and business can work synergistically.

  13. The NASA Ames Fatigue Countermeasures Program: The Next Generation

    NASA Technical Reports Server (NTRS)

    Rosekind, Mark R.; Neri, David F.; Miller, Donna L.; Gregory, Kevin B.; Webbon, Lissa L.; Oyung, Ray L.

    1997-01-01

    Twenty-four hour, global aviation operations pose unique challenges to humans. Physiological requirements related to sleep, the internal circadian clock, and human fatigue are critical factors that are known to affect safety, performance, and productivity. Understanding the human operators' physiological capabilities, and limitations, will be important to address these issues as global demand for aviation activities continues to increase. In 1980, in response to a Congressional request, the National Aeronautics and Space Administration (NASA) Ames Research Center initiated a Fatigue/Jet Lag Program to examine the role of fatigue in flight operations. Originally established by Dr. John K. Lauber and Dr. Charles E. Billings, the Program was designed to address three objectives: (1) determine the extent of fatigue, sleep loss, and circadian disruption in flight operations; (2) determine how fatigue affected flight crew performance; and (3) develop strategies to maximize performance and alertness during flight operations.

  14. NASA/ESA CV-990 spacelab simulation

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Due to interest in the application of simplified techniques used to conduct airborne science missions at NASA's Ames Research Center, a joint NASA/ESA endeavor was established to conduct an extensive Spacelab simulation using the NASA CV-990 airborne laboratory. The scientific payload was selected to perform studies in upper atmospheric physics and infrared astronomy with principal investigators from France, the Netherlands, England, and several groups from the United States. Communication links between the 'Spacelab' and a ground based mission operations center were limited consistent with Spacelab plans. The mission was successful and provided extensive data relevant to Spacelab objectives on overall management of a complex international payload; experiment preparation, testing, and integration; training for proxy operation in space; data handling; multiexperimenter use of common experimenter facilities (telescopes); multiexperiment operation by experiment operators; selection criteria for Spacelab experiment operators; and schedule requirements to prepare for such a Spacelab mission.

  15. Summary of: Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model (Presentation)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Denholm, P.; Hummon, M.

    2013-02-01

    Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of different generation mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test systemmore » consisting of two balancing areas located primarily in Colorado.« less

  16. Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Denholm, P.; Hummon, M.

    2012-11-01

    Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of different generation mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test systemmore » consisting of two balancing areas located primarily in Colorado.« less

  17. Noise Considerations for V/STOL Transports

    NASA Technical Reports Server (NTRS)

    Kenyon, George C.

    1968-01-01

    Noise consideration may well be as important a factor in future aircraft concept selection as such economic factors as operating cost and profitability. The impact of noise on some of the design and operational aspects of future V/STOL transports is examined in detail, including consideration of configuration, attitude-control system, lift system, and terminal flight pattern. Extended vertical rise of VTOL aircraft as a method of limiting the intense noise exposure to the terminal area is shown to be only partially effective as well as costly. Comparisons are made of noise contours for conceptual V/STOL transports for several PNdB criteria. The variation in extent of affected area with configuration and criterion emphasizes the importance of establishing an "acceptable" noise level for "city-center" operation.

  18. Evaluation of automated serum des-gamma-carboxyprothrombin (DCP) assays for detecting hepatocellular carcinoma.

    PubMed

    Choi, Jonghyeon; Park, Yongjung; Kim, Jeong-Ho; Kim, Hyon-Suk

    2011-12-01

    We evaluated two new autoanalyzers, μTAS and Lumipulse for des-γ-carboxyprothrombin (DCP) assay. Analytical performance was evaluated, and the upper reference limit of the 97.5th percentile for DCP was re-established using sera from 140 healthy individuals. DCP levels were determined by the two autoanalyzers and EIA in a total of 239 sera from HCC patients (n=120) and those without HCC (n=119). Total imprecision of the two automated assays was <5% CV. Analytical measurement ranges (AMRs) were verified to be linear. The new reference limits were 29.5 mAU/mL for μTAS and 35.0 mAU/mL for Lumipulse. There were proportional and constant biases between the results from the autoanalyzers and those from EIA. The two newly developed DCP assays showed high analytical performance, but re-establishment of reference limits would be necessary. The new analyzers could be useful for clinical laboratories because of convenience of operation and wide AMRs. Copyright © 2011 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  19. Effect of In-Vehicle Audio Warning System on Driver’s Speed Control Performance in Transition Zones from Rural Areas to Urban Areas

    PubMed Central

    Yan, Xuedong; Wang, Jiali; Wu, Jiawei

    2016-01-01

    Speeding is a major contributing factor to traffic crashes and frequently happens in areas where there is a mutation in speed limits, such as the transition zones that connect urban areas from rural areas. The purpose of this study is to investigate the effects of an in-vehicle audio warning system and lit speed limit sign on preventing drivers’ speeding behavior in transition zones. A high-fidelity driving simulator was used to establish a roadway network with the transition zone. A total of 41 participants were recruited for this experiment, and the driving speed performance data were collected from the simulator. The experimental results display that the implementation of the audio warning system could significantly reduce drivers’ operating speed before they entered the urban area, while the lit speed limit sign had a minimal effect on improving the drivers’ speed control performance. Without consideration of different types of speed limit signs, it is found that male drivers generally had a higher operating speed both upstream and in the transition zones and have a larger maximum deceleration for speed reduction than female drivers. Moreover, the drivers who had medium-level driving experience had the higher operating speed and were more likely to have speeding behaviors in the transition zones than those who had low-level and high-level driving experience in the transition zones. PMID:27347990

  20. Endoscopic plantar fasciotomy versus extracorporeal shock wave therapy for treatment of chronic plantar fasciitis

    PubMed Central

    Ragab, Ehab Mohamed

    2009-01-01

    Background Planter fasciitis is a common cause of heel pain in adults. Many treatment options exist. Most of patients resolve with conservative management. Approximately 10% of patients develop persistent and often disabling symptoms. Patients and methods This prospective study includes 37 patients with an established diagnosis of chronic plantar fasciitis, aiming to compare two different techniques of treatment. First group includes 17 patients with a mean age of 42 years treated by endoscopic plantar fasciotomy (EPF); the mean follow-up was 11 months. Second group includes 20 patients with a mean age of 45 years treated by extracorporeal shock Wave Therapy (ESWT); the mean follow-up was 7.6 months. Results In the first group (EPF), using the visual analog scale the average post-operative pain was improved from 9.1 to 1.6. Post-operatively, 58.8% had no limitation of functional activities, 35.3% had minimal limitation of activities and 5.9% had moderate limitation of activities. Concerning patient satisfaction, 82.3% of patients were completely satisfied, 11.8% of patients were satisfied with reservation and 5.9% of patients were unsatisfied. For the second group (ESWT), using the visual analog scale the average post-operative pain was improved from 9 to 2.1. Post-operatively, 50% had no functional limitation of activities, 35% had minimal limitation of activities, 10% had moderate limitation of activities, and 5% had severe limitation of activities. Concerning patient satisfaction, 75% of patients were completely satisfied and 25% were satisfied with reservation or unsatisfied. Conclusion Because of better results with endoscopic release versus the benefits of no complications, no immobilization, and early resumption of full activities with ESWT, we conclude that ESWT is a reasonable earlier line of treatment of chronic plantar fasciitis before EPF. PMID:20033696

  1. Counter-Terrorism and the Use of Force in International Law

    DTIC Science & Technology

    2002-11-01

    authority of the Council to establish such tribunals was unsuccessfully challenged in an interlocutory appeal before the Appeals Chamber of the...see report 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 107 19a. NAME OF RESPONSIBLE PERSON...State may resort to force as an instrument of national policy. Although States have conducted military counter-terrorist operations in the past, the

  2. Recommendations of the panels: Panel on flight planning to avoid high ozone

    NASA Technical Reports Server (NTRS)

    Mohnen, V. A.

    1979-01-01

    Flights planned or accomplished during certain months of the year at the higher latitudes and altitudes at or above the tropopause are discussed. Cabin ozone level limitations are established, and additional information is required for more accurate and qualtitative forecasting and design data base for operational utilization. Better tropopause heights, ozone concentration and corresponding meteorological data along selected flight routes, and meteorological data were investigated.

  3. Analyzing Communication Architectures Using Commercial Off-The-Shelf (COTS) Modeling and Simulation Tools

    DTIC Science & Technology

    1998-06-01

    4] By 2010, we should be able to change how we conduct the most intense joint operations. Instead of relying on massed forces and sequential ...not independent, sequential steps. Data probes to support the analysis phase were required to complete the logical models. This generated a need...Networks) Identify Granularity (System Level) - Establish Physical Bounds or Limits to Systems • Determine System Test Configuration and Lineup

  4. Surgical interventions for pulmonary tuberculosis in Mumbai, India: surgical outcomes and programmatic challenges.

    PubMed

    Shirodkar, S; Anande, L; Dalal, A; Desai, C; Corrêa, G; Das, M; Laxmeshwar, C; Mansoor, H; Remartinez, D; Trelles, M; Isaakidis, P

    2016-09-01

    Setting: While surgery for pulmonary tuberculosis (PTB) is considered an important adjunct for specific cases, including drug-resistant tuberculosis, operational evidence on its feasibility and effectiveness is limited. Objective: To describe surgical outcomes and programmatic challenges of providing surgery for PTB in Mumbai, India. Design: A descriptive study of routinely collected data of surgical interventions for PTB from 2010 to 2014 in two Mumbai hospitals, one public, one private. Results: Of 85 patients, 5 (6%) died and 17 (20%) had complications, with wound infection being the most frequent. Repeat operation was required in 12 (14%) patients. Most procedures were performed on an emergency basis, and eligibility was established late in the course of treatment. Median time from admission to surgery was 51 days. Drug susceptibility test (DST) patterns and final treatment outcomes were not systematically collected. Conclusion: In a high-burden setting such as Mumbai, important data on surgery for PTB were surprisingly limited in both the private and public sectors. Eligibility for surgery was established late, culture and DST were not systematically offered, the interval between admission and surgery was long and TB outcomes were not known. Systematic data collection would allow for proper evaluation of surgery as adjunctive therapy for all forms of TB under programmatic conditions.

  5. Surgical interventions for pulmonary tuberculosis in Mumbai, India: surgical outcomes and programmatic challenges

    PubMed Central

    Shirodkar, S.; Anande, L.; Dalal, A.; Desai, C.; Corrêa, G.; Laxmeshwar, C.; Mansoor, H.; Remartinez, D.; Trelles, M.; Isaakidis, P.

    2016-01-01

    Setting: While surgery for pulmonary tuberculosis (PTB) is considered an important adjunct for specific cases, including drug-resistant tuberculosis, operational evidence on its feasibility and effectiveness is limited. Objective: To describe surgical outcomes and programmatic challenges of providing surgery for PTB in Mumbai, India. Design: A descriptive study of routinely collected data of surgical interventions for PTB from 2010 to 2014 in two Mumbai hospitals, one public, one private. Results: Of 85 patients, 5 (6%) died and 17 (20%) had complications, with wound infection being the most frequent. Repeat operation was required in 12 (14%) patients. Most procedures were performed on an emergency basis, and eligibility was established late in the course of treatment. Median time from admission to surgery was 51 days. Drug susceptibility test (DST) patterns and final treatment outcomes were not systematically collected. Conclusion: In a high-burden setting such as Mumbai, important data on surgery for PTB were surprisingly limited in both the private and public sectors. Eligibility for surgery was established late, culture and DST were not systematically offered, the interval between admission and surgery was long and TB outcomes were not known. Systematic data collection would allow for proper evaluation of surgery as adjunctive therapy for all forms of TB under programmatic conditions. PMID:27695683

  6. An Incentive-based Online Optimization Framework for Distribution Grids

    DOE PAGES

    Zhou, Xinyang; Dall'Anese, Emiliano; Chen, Lijun; ...

    2017-10-09

    This article formulates a time-varying social-welfare maximization problem for distribution grids with distributed energy resources (DERs) and develops online distributed algorithms to identify (and track) its solutions. In the considered setting, network operator and DER-owners pursue given operational and economic objectives, while concurrently ensuring that voltages are within prescribed limits. The proposed algorithm affords an online implementation to enable tracking of the solutions in the presence of time-varying operational conditions and changing optimization objectives. It involves a strategy where the network operator collects voltage measurements throughout the feeder to build incentive signals for the DER-owners in real time; DERs thenmore » adjust the generated/consumed powers in order to avoid the violation of the voltage constraints while maximizing given objectives. Stability of the proposed schemes is analytically established and numerically corroborated.« less

  7. An Incentive-based Online Optimization Framework for Distribution Grids

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, Xinyang; Dall'Anese, Emiliano; Chen, Lijun

    This article formulates a time-varying social-welfare maximization problem for distribution grids with distributed energy resources (DERs) and develops online distributed algorithms to identify (and track) its solutions. In the considered setting, network operator and DER-owners pursue given operational and economic objectives, while concurrently ensuring that voltages are within prescribed limits. The proposed algorithm affords an online implementation to enable tracking of the solutions in the presence of time-varying operational conditions and changing optimization objectives. It involves a strategy where the network operator collects voltage measurements throughout the feeder to build incentive signals for the DER-owners in real time; DERs thenmore » adjust the generated/consumed powers in order to avoid the violation of the voltage constraints while maximizing given objectives. Stability of the proposed schemes is analytically established and numerically corroborated.« less

  8. Operational fitness of box truss antennas in response to dynamic slewing

    NASA Technical Reports Server (NTRS)

    Bachtell, E. E.; Bettadapur, S. S.; Schartel, W. A.; Karanian, L. A.

    1985-01-01

    A parametric study was performed to define slewing capability of large satellites along with associated system changes or subsystem weight and complexity impacts. The satellite configuration and structural arrangement from the Earth Observation Spacecraft (EOS) study was used as the baseline spacecraft. Varying slew rates, settling times, damping, maneuver frequencies, and attitude hold times provided the data required to establish applicability to a wide range of potential missions. The key elements of the study are: (1) determine the dynamic transient response of the antenna system; (2) calculate the system errors produced by the dynamic response; (3) determine if the antenna has exceeded operational requirements at completion of the slew, and if so; (4) determine when the antenna has settled to the operational requirements. The slew event is not considered complete until the antenna is within operational limits.

  9. Occupational radiation dose to eyes from interventional radiology procedures in light of the new eye lens dose limit from the International Commission on Radiological Protection

    PubMed Central

    Walsh, C; Gallagher, A; Dowling, A; Guiney, M; Ryan, J M; McEniff, N; O'Reilly, G

    2015-01-01

    Objective: In 2011, the International Commission on Radiological Protection (ICRP) recommended a substantial reduction in the equivalent dose limit for the lens of the eye, in line with a reduced threshold of absorbed dose for radiation-induced cataracts. This is of particular relevance in interventional radiology (IR) where it is well established that staff doses can be significant, however, there is a lack of data on IR eye doses in terms of Hp(3). Hp(3) is the personal dose equivalent at a depth of 3 mm in soft tissue and is used for measuring lens dose. We aimed to obtain a reliable estimate of eye dose to IR operators. Methods: Lens doses were measured for four interventional radiologists over a 3-month period using dosemeters specifically designed to measure Hp(3). Results: Based on their typical workloads, two of the four interventional radiologists would exceed the new ICRP dose limit with annual estimated doses of 31 and 45 mSv to their left eye. These results are for an “unprotected” eye, and for IR staff who routinely wear lead glasses, the dose beneath the glasses is likely to be significantly lower. Staff eye dose normalized to patient kerma–area product and eye dose per procedure have been included in the analysis. Conclusion: Eye doses to IR operators have been established using a dedicated Hp(3) dosemeter. Estimated annual doses have the potential to exceed the new ICRP limit. Advances in knowledge: We have estimated lens dose to interventional radiologists in terms of Hp(3) for the first time in an Irish hospital setting. PMID:25761211

  10. Methods to Assess Bioavailability of Hydrophobic Organic Contaminants: Principles, Operations, and Limitations

    PubMed Central

    Cui, Xinyi; Mayer, Philipp; Gan, Jay

    2013-01-01

    Many important environmental contaminants are hydrophobic organic contaminants (HOCs), which include PCBs, PAHs, PBDEs, DDT and other chlorinated insecticides, among others. Owing to their strong hydrophobicity, HOCs have their final destination in soil or sediment, where their ecotoxicological effects are closely regulated by sorption and thus bioavailability. The last two decades has seen a dramatic increase in research efforts in developing and applying partitioning based methods and biomimetic extractions for measuring HOC bioavailability. However, the many variations of both analytical methods and associated measurement endpoints are often a source of confusion for users. In this review, we distinguish the most commonly used analytical approaches based on their measurement objectives, and illustrate their practical operational steps, strengths and limitations using simple flowcharts. This review may serve as guidance for new users on the selection and use of established methods, and a reference for experienced investigators to identify potential topics for further research. PMID:23064200

  11. Development of a High Temperature Heater using an Yttria Stabilized Zirconia Cored Brick Matrix

    NASA Technical Reports Server (NTRS)

    Smith, K. W.; Decoursin, D. G.

    1971-01-01

    The Ames pilot heater is a ceramic regenerative heater that provides high temperature air for aerodynamic and combustion experiments. The development of this heater to provide a heat storage bed with temperature capability of about 4600 R is described. A bed was designed and installed having cored brick elements of yttria-stabilized zirconia. The bed dimensions were 14 inches in diameter by 10 feet high. The thermal stress limitations of the bed were studied and maximum air flow rates based upon these limits were established. A combustion reheat system was designed and installed to provide the necessary control over the bed temperature distribution. The revised heater system was successfully operated at a maximum bed temperature of 4600 R. The successful operation demonstrated that yttria-stabilized zirconia cored brick can satisfy the high temperature-long duration requirement for storage heater applications.

  12. 27 CFR 24.102 - Premises established for taxpaid wine operations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... taxpaid wine operations. 24.102 Section 24.102 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Establishment and Operations Premises and Operations § 24.102 Premises established for taxpaid wine operations. A person desiring to bottle...

  13. Numerical study of a novel procedure for installing the tower and Rotor Nacelle Assembly of offshore wind turbines based on the inverted pendulum principle

    NASA Astrophysics Data System (ADS)

    Guachamin Acero, Wilson; Gao, Zhen; Moan, Torgeir

    2017-09-01

    Current installation costs of offshore wind turbines (OWTs) are high and profit margins in the offshore wind energy sector are low, it is thus necessary to develop installation methods that are more efficient and practical. This paper presents a numerical study (based on a global response analysis of marine operations) of a novel procedure for installing the tower and Rotor Nacelle Assemblies (RNAs) on bottom-fixed foundations of OWTs. The installation procedure is based on the inverted pendulum principle. A cargo barge is used to transport the OWT assembly in a horizontal position to the site, and a medium-size Heavy Lift Vessel (HLV) is then employed to lift and up-end the OWT assembly using a special upending frame. The main advantage of this novel procedure is that the need for a huge HLV (in terms of lifting height and capacity) is eliminated. This novel method requires that the cargo barge is in the leeward side of the HLV (which can be positioned with the best heading) during the entire installation. This is to benefit from shielding effects of the HLV on the motions of the cargo barge, so the foundations need to be installed with a specific heading based on wave direction statistics of the site and a typical installation season. Following a systematic approach based on numerical simulations of actual operations, potential critical installation activities, corresponding critical events, and limiting (response) parameters are identified. In addition, operational limits for some of the limiting parameters are established in terms of allowable limits of sea states. Following a preliminary assessment of these operational limits, the duration of the entire operation, the equipment used, and weather- and water depth-sensitivity, this novel procedure is demonstrated to be viable.

  14. Evaluation of Agency Non-Code Layered Pressure Vessels (LPVs) . Volume 2; Appendices

    NASA Technical Reports Server (NTRS)

    Prosser, William H.

    2014-01-01

    In coordination with the Office of Safety and Mission Assurance and the respective Center Pressure System Managers (PSMs), the NASA Engineering and Safety Center (NESC) was requested to formulate a consensus draft proposal for the development of additional testing and analysis methods to establish the technical validity, and any limitation thereof, for the continued safe operation of facility non-code layered pressure vessels. The PSMs from each NASA Center were asked to participate as part of the assessment team by providing, collecting, and reviewing data regarding current operations of these vessels. This document contains the appendices to the main report.

  15. Metallic Thermal Protection System Technology Development: Concepts, Requirements and Assessment Overview

    NASA Technical Reports Server (NTRS)

    Dorsey, John T.; Poteet, Carl C.; Chen, Roger R.; Wurster, Kathryn E.

    2002-01-01

    A technology development program was conducted to evolve an earlier metallic thermal protection system (TPS) panel design, with the goals of: improving operations features, increasing adaptability (ease of attaching to a variety of tank shapes and structural concepts), and reducing weight. The resulting Adaptable Robust Metallic Operable Reusable (ARMOR) TPS system incorporates a high degree of design flexibility (allowing weight and operability to be traded and balanced) and can also be easily integrated with a large variety of tank shapes, airframe structural arrangements and airframe structure/material concepts. An initial attempt has been made to establish a set of performance based TPS design requirements. A set of general (FARtype) requirements have been proposed, focusing on defining categories that must be included for a comprehensive design. Load cases required for TPS design must reflect the full flight envelope, including a comprehensive set of limit loads, However, including additional loads. such as ascent abort trajectories, as ultimate load cases, and on-orbit debris/micro-meteoroid hypervelocity impact, as one of the discrete -source -damage load cases, will have a significant impact on system design and resulting performance, reliability and operability. Although these load cases have not been established, they are of paramount importance for reusable vehicles, and until properly included, all sizing results and assessments of reliability and operability must be considered optimistic at a minimum.

  16. Vibration analysis of the sulky accessory for a commercial walk-behind lawn mower to determine operator comfort and health.

    PubMed

    Thrailkill, Elizabeth A; Lowndes, Bethany R; Hallbeck, M Susan

    2013-01-01

    A sulky is a single-wheeled platform attachment on which the operator of a commercial walk-behind lawn mower rides while standing. The effects of sulky vibration on operator comfort and health have not been investigated. In this study, tri-axial accelerometers measured sulky vibration during mower use by two commercial mowers on varied terrain and 12 volunteer mowers over a controlled course. The accelerometer data were processed according to methods established in ISO 2631. Results indicate the mean frequency-weighted root mean square (RMS) acceleration sums fall into the 'very uncomfortable' range for vibration of standing persons (1.9 ± 0.48 m s⁻²). Additionally, vibration dose values indicated that the mean vibration dosages exceeded the daily exposure limit values established in Directive 2002 /44/EC (z-axis A(8) value of 1.30 ± 34 m s⁻²; VDV(exp) value of 28.1 ± 6.25 m s⁻¹·⁷⁵). This information suggests that modifications including vibration damping should be added to the sulky to reduce rider discomfort and health risks. This study investigated the effects of vibration during use of a commercial lawn mowing sulky. Findings from accelerometer data suggest that the vibration experienced by sulky operators is significant enough to cause discomfort and health risks which may lead to personnel turnover or long-term effects for the operator.

  17. On the weight of indels in genomic distances

    PubMed Central

    2011-01-01

    Background Classical approaches to compute the genomic distance are usually limited to genomes with the same content, without duplicated markers. However, differences in the gene content are frequently observed and can reflect important evolutionary aspects. A few polynomial time algorithms that include genome rearrangements, insertions and deletions (or substitutions) were already proposed. These methods often allow a block of contiguous markers to be inserted, deleted or substituted at once but result in distance functions that do not respect the triangular inequality and hence do not constitute metrics. Results In the present study we discuss the disruption of the triangular inequality in some of the available methods and give a framework to establish an efficient correction for two models recently proposed, one that includes insertions, deletions and double cut and join (DCJ) operations, and one that includes substitutions and DCJ operations. Conclusions We show that the proposed framework establishes the triangular inequality in both distances, by summing a surcharge on indel operations and on substitutions that depends only on the number of markers affected by these operations. This correction can be applied a posteriori, without interfering with the already available formulas to compute these distances. We claim that this correction leads to distances that are biologically more plausible. PMID:22151784

  18. Lean Blow-out Studies in a Swirl Stabilized Annular Gas Turbine Combustor

    NASA Astrophysics Data System (ADS)

    Mishra, R. K.; Kishore Kumar, S.; Chandel, Sunil

    2015-05-01

    Lean blow out characteristics in a swirl stabilized aero gas turbine combustor have been studied using computational fluid dynamics. For CFD analysis, a 22.5° sector of an annular combustor is modeled using unstructured tetrahedral meshes comprising 1.2 × 106 elements. The governing equations are solved using the eddy dissipation combustion model in CFX. The primary combustion zone is analyzed by considering it as a well stirred reactor. The analysis has been carried out for different operating conditions of the reactants entering into the control volume. The results are treated as the base-line or reference values. Combustion lean blow-out limits are further characterized studying the behavior of combustion zone during transient engine operation. The validity of the computational study has been established by experimental study on a full-scale annular combustor in an air flow test facility that is capable of simulating different conditions at combustor inlet. The experimental result is in a good agreement with the analytical predictions. Upon increasing the combustor mass flow, the lean blow out limit increases, i.e., the blow out occurs at higher fuel-air ratios. In addition, when the operating pressure decreases, the lean blow out limit increases, i.e., blow out occurs at higher fuel-air ratios.

  19. Clinical track faculty: merits and issues.

    PubMed

    Lee, Won-Hee; Kim, Cho Ja; Roh, Young Sook; Shin, Hyunsook; Kim, Mi Ja

    2007-01-01

    Clinical track faculty (CTF) has been in operation for more than two decades in the United States, and 12 of the top 20 schools of nursing with the highest National Institutes of Health funding in the United States have CTF in place. Yet, only limited articles have been published regarding the merits and issues related to its operation. This article examines the advantages/merits of establishing CTF in schools of nursing, discusses the qualification criteria and types of appointment for CTF, and analyzes issues related to operating CTF in Korea. A questionnaire survey and two workshops were conducted involving faculty from a college of nursing and clinical nurse managers from university-affiliated medical centers and community agencies. Most of the respondents indicated that establishing CTF was advantageous. Merits included the following: increasing reality-based clinical education and training; decreasing the reality shock of students; increasing student satisfaction; and linking education, practice, and research more effectively. Major issues were as follows: getting the approval of medical centers/universities; developing an agreement on CTF operation between the college of nursing and clinical agencies; clarifying types and criteria of appointment and promotion; and developing a statement on role and compensation policies. Most issues are similar to what U.S. schools of nursing have faced, except for the first one. In conclusion, establishing CTF in Korea appears to be highly desirable. Merits outweigh issues/concerns, and Korean nursing schools may look for an opportune time for obtaining the approval of medical centers/universities. Nursing schools in other countries that face a similar challenge of providing clinical teaching with high research performance may consider instituting CTF.

  20. Typical whole body vibration exposure magnitudes encountered in the open pit mining industry.

    PubMed

    Howard, Bryan; Sesek, Richard; Bloswick, Don

    2009-01-01

    According to recent research, a causal link has been established between occupational exposure to whole body vibration and an increased occurrence of low back pain. To aid in the further development of an in-house health and safety program for a large open pit mining facility interested in reducing back pain among its operators, whole body vibration magnitudes were characterized for a range of jobs. Specifically, thirty-five individual jobs from five different areas across the facility were evaluated for tri-axial acceleration levels during normal operating conditions. Tri-axial acceleration magnitudes were categorized into thirteen job groups. Job groups were ranked according to exposure and compared to the ISO 2631-1 standard for health risk assessment. Three of the thirteen job groups produced tri-axial acceleration magnitudes below the ISO 2631-1 low/moderate health caution limit for a twelve hour exposure. Six of the thirteen job groups produced exposures within the moderate health risk range. Four job groups were found to subject operators to WBV acceleration magnitudes above the moderate/high health caution limit.

  1. The maximal cooling power of magnetic and thermoelectric refrigerators with La(FeCoSi)13 alloys

    NASA Astrophysics Data System (ADS)

    Skokov, K. P.; Karpenkov, A. Yu.; Karpenkov, D. Yu.; Gutfleisch, O.

    2013-05-01

    Using our data on magnetic entropy change ΔSm, adiabatic temperature change ΔTad and heat capacity CH for La(FeCoSi)13 alloys, the upper limit of heat Qc transferred per cycle, and the lowest limit of consumed work Wc were established for magnetic refrigerators operating in Δμ0H =1.9 T. In order to estimate the cooling power, attributable to thermoelectric refrigerators with La(FeCoSi)13, thermal conductivity λ, resistivity ρ, and Seebeck coefficient α were measured and the maximal cooling power QL, the input power Pi, and coefficient of performance have been calculated.

  2. Cycling excitation process: An ultra efficient and quiet signal amplification mechanism in semiconductor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Yu-Hsin; Yan, Lujiang; Zhang, Alex Ce

    2015-08-03

    Signal amplification, performed by transistor amplifiers with its merit rated by the efficiency and noise characteristics, is ubiquitous in all electronic systems. Because of transistor thermal noise, an intrinsic signal amplification mechanism, impact ionization was sought after to complement the limits of transistor amplifiers. However, due to the high operation voltage (30-200 V typically), low power efficiency, limited scalability, and, above all, rapidly increasing excess noise with amplification factor, impact ionization has been out of favor for most electronic systems except for a few applications such as avalanche photodetectors and single-photon Geiger detectors. Here, we report an internal signal amplification mechanismmore » based on the principle of the phonon-assisted cycling excitation process (CEP). Si devices using this concept show ultrahigh gain, low operation voltage, CMOS compatibility, and, above all, quantum limit noise performance that is 30 times lower than devices using impact ionization. Established on a unique physical effect of attractive properties, CEP-based devices can potentially revolutionize the fields of semiconductor electronics.« less

  3. Application of confocal laser microscopy for monitoring mesh implants in herniology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zakharov, V P; Belokonev, V I; Bratchenko, I A

    2011-04-30

    The state of the surface of mesh implants and their encapsulation region in herniology is investigated by laser confocal microscopy. A correlation between the probability of developing relapses and the size and density of implant microdefects is experimentally shown. The applicability limits of differential reverse scattering for monitoring the post-operation state of implant and adjacent tissues are established based on model numerical experiments. (optical technologies in biophysics and medicine)

  4. Natural Gas Basics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2016-06-08

    Natural gas powers about 150,000 vehicles in the United States and roughly 22 million vehicles worldwide. Natural gas vehicles (NGVs) are a good choice for high-mileage fleets -- such as buses, taxis, and refuse vehicles -- that are centrally fueled or operate within a limited area or along a route with natural gas fueling stations. This brochure highlights the advantages of natural gas as an alternative fuel, including its domestic availability, established distribution network, relatively low cost, and emissions benefits.

  5. Natural Gas Basics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    2016-06-01

    Natural gas powers about 150,000 vehicles in the United States and roughly 22 million vehicles worldwide. Natural gas vehicles (NGVs) are a good choice for high-mileage fleets -- such as buses, taxis, and refuse vehicles -- that are centrally fueled or operate within a limited area or along a route with natural gas fueling stations. This brochure highlights the advantages of natural gas as an alternative fuel, including its domestic availability, established distribution network, relatively low cost, and emissions benefits.

  6. Advanced oxygen-hydrocarbon rocket engine study

    NASA Technical Reports Server (NTRS)

    Obrien, C. J.; Salkeld, R.

    1980-01-01

    The advantages and disadvantages, system performance and operating limits, engine parametric data, and technology requirements for candidate high pressure LO2/Hydrocarbon engine systems are summarized. These summaries of parametric analysis and design provide a consistent engine system data base. Power balance data were generated for the eleven engine cycles. Engine cycle rating parameters were established and the desired condition and the effect of the parameter on the engine and/or vehicle are described.

  7. [CompuRecord--A perioperative information management-system for anesthesia].

    PubMed

    Martin, J; Ederle, D; Milewski, P

    2002-08-01

    Since 1977 procedures for automatic documentation of anesthesias have repeatedly been described. Because of a limited arrangement of the desk top and because of its focussing on intraoperative documentation only a widespread introduction could not be established so far. Todays systems are offered with graphically orientated desktops which can be operated by intuition. The CompuRecord(R)-System (Philips Healthcare) is a perioperative management system for anaesthesia. It is constructed with modular components, recording the complete anaesthesiological care of a patient from preanaesthesiological assessment to the recovery room. Additional modules allow an economical check, provide for quality management and exportation of a core data base. Except for the original software all other components of the system including the net work components are IT standard products allowing reduced costs for supplementation, expansion and support. The advantage of an automatical documentation system of anaesthesia is frequent and detailed recording of anaesthesiological data as well as the possibility of a meticulous calculation of cost for each patient. The anaesthesiologist's time used for documentation is reduced remarkably with a limited and reasonable amount of data to be recorded. This leaves more time of attention for the patient himself. Time necessary for training is kept low with the touch screens of the CompuRecord(R) - System, which can be operated intuitively. Primary to purchase an exact analysis of process and of subsequent costs should be done. Standardized documentation allows to establish Standard Operating Procedures in a department of Anaesthesia. Using the given systems an implementation is possible already today despite restricted resources of man power.

  8. The Clean Air Act: A time to assess impacts and management options

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goldberg, T.; Repa, E.

    The Clean Air Act Amendments of 1990 significantly altered the complexion of air emission regulation and for the first time established requirements for comprehensive emission control strategies. None of the provisions of this act will have as great an impact on the waste management industry as will the General Operating Permit Provisions of Title V. Title V establishes a program for issuing operating permits to all major sources (and certain other sources) of air pollutants in the U.S. These permits will collect in one place all applicable requirements, limitations, and conditions governing regulated air emissions. While past air regulations governedmore » specific air emissions sources, as of November 1993 the law requires states and localities to regulate emissions from all major stationary sources that directly emit, or have the potential to emit, 100 tons or more of any pollutant, 10 tons or more of a single hazardous air pollutant, or 25 tons or more of two or more hazardous air pollutants.« less

  9. Rubisco small-subunit α-helices control pyrenoid formation in Chlamydomonas

    PubMed Central

    Meyer, Moritz T.; Genkov, Todor; Skepper, Jeremy N.; Jouhet, Juliette; Mitchell, Madeline C.; Spreitzer, Robert J.; Griffiths, Howard

    2012-01-01

    The pyrenoid is a subcellular microcompartment in which algae sequester the primary carboxylase, ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco). The pyrenoid is associated with a CO2-concentrating mechanism (CCM), which improves the operating efficiency of carbon assimilation and overcomes diffusive limitations in aquatic photosynthesis. Using the model alga Chlamydomonas reinhardtii, we show that pyrenoid formation, Rubisco aggregation, and CCM activity relate to discrete regions of the Rubisco small subunit (SSU). Specifically, pyrenoid occurrence was shown to be conditioned by the amino acid composition of two surface-exposed α-helices of the SSU: higher plant-like helices knock out the pyrenoid, whereas native algal helices establish a pyrenoid. We have also established that pyrenoid integrity was essential for the operation of an active CCM. With the algal CCM being functionally analogous to the terrestrial C4 pathway in higher plants, such insights may offer a route toward transforming algal and higher plant productivity for the future. PMID:23112177

  10. Charter for Systems Engineer Working Group

    NASA Technical Reports Server (NTRS)

    Suffredini, Michael T.; Grissom, Larry

    2015-01-01

    This charter establishes the International Space Station Program (ISSP) Mobile Servicing System (MSS) Systems Engineering Working Group (SEWG). The MSS SEWG is established to provide a mechanism for Systems Engineering for the end-to-end MSS function. The MSS end-to-end function includes the Space Station Remote Manipulator System (SSRMS), the Mobile Remote Servicer (MRS) Base System (MBS), Robotic Work Station (RWS), Special Purpose Dexterous Manipulator (SPDM), Video Signal Converters (VSC), and Operations Control Software (OCS), the Mobile Transporter (MT), and by interfaces between and among these elements, and United States On-Orbit Segment (USOS) distributed systems, and other International Space Station Elements and Payloads, (including the Power Data Grapple Fixtures (PDGFs), MSS Capture Attach System (MCAS) and the Mobile Transporter Capture Latch (MTCL)). This end-to-end function will be supported by the ISS and MSS ground segment facilities. This charter defines the scope and limits of the program authority and document control that is delegated to the SEWG and it also identifies the panel core membership and specific operating policies.

  11. Analysis of Energy Intensive Enterprises under EU Emission Trading System in Latvia

    NASA Astrophysics Data System (ADS)

    Zahare, Dace; Rosa, Marika

    2011-01-01

    Climate change and global warming has become one of the main topics worldwide. The European Union Emission Trading System (EU ETS) was established to limit climate change, providing regulations which encourage companies to invest in cleaner production and more energy efficient production. Latvian energy intensive enterprises are operating under the EU ETS from the year 2005. The main goal of this paper is to provide an analysis of energy intensive installations in terms of their energy efficiency. Additionally, an analysis of EU ETS phase III which will start to operate in 2013 under new, more stringent rules has been conducted by modelling three Latvian energy intensive enterprise operations under this phase and estimating the barriers to meet the goal of the EU ETS phase III.

  12. Plasma gasification of municipal solid waste

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carter, G.W.; Tsangaris, A.V.

    1995-12-31

    Resorption Canada Limited (RCL) has conducted extensive operational testing with plasma technology in their plasma facility near Ottawa, Ontario, Canada to develop an environmentally friendly waste disposal process. Plasma technology, when utilized in a reactor vessel with the exclusion of oxygen, provides for the complete gasification of all combustibles in source materials with non-combustibles being converted to a non-hazardous slag. The energy and environmental characteristics of the plasma gasification of carbonaceous waste materials were studied over a period of eight years during which RCL completed extensive experimentation with MSW. A plasma processing system capable of processing 200--400 lbs/hr of MSWmore » was designed and built. The experimentation on MSW concentrated on establishing the optimum operating parameters and determining the energy and environmental characteristics at these operating parameters.« less

  13. Ecological networks as conceptual frameworks or operational tools in conservation.

    PubMed

    Boitani, Luigi; Falcucci, Alessandra; Maiorano, Luigi; Rondinini, Carlo

    2007-12-01

    The establishment of ecological networks (ENs) has been proposed as an ideal way to counteract the increasing fragmentation of natural ecosystems and as a necessary complement to the establishment of protected areas for biodiversity conservation. This conservation tool, which comprises core areas, corridors, and buffer areas, has attracted the attention of several national and European institutions. It is thought that ENs can connect habitat patches and thus enable species to move across unsuitable areas. In Europe, however, ENs are proposed as an oversimplification of complex ecological concepts, and we maintain that they are of limited use for biodiversity conservation for several reasons. The ENs are species specific and operate on species-dependent scales. In addition, the information needed for their implementation is only available for a handful of species. To overcome these limitations, ENs have been proposed on a landscape scale (and for selected "focal" species), but there is no indication that the structural composition of core areas, corridors, and buffer areas could ensure the functional connectivity and improve the viability of more than a few species. The theory behind ENs fails to provide sufficient practical information on how to build them (e.g., width, shape, structure, content). In fact, no EN so far has been validated in practice (ensuring connectivity and increasing overall biodiversity conservation), and there are no signs that validation will be possible in the near future. In view of these limitations, it is difficult to justify spending economic and political resources on building systems that are at best working hypotheses that cannot be evaluated on a practical level.

  14. Lessons from the organisation of the UK medical services deployed in support of Operation TELIC (Iraq) and Operation HERRICK (Afghanistan).

    PubMed

    Bricknell, Martin C M; Nadin, M

    2017-08-01

    This paper provides the definitive record of the UK Defence Medical Services (DMS) lessons from the organisation of medical services in support of Operation (Op) TELIC (Iraq) and Op HERRICK (Afghanistan). The analysis involved a detailed review of the published academic literature, internal post-operational tour reports and post-tour interviews. The list of lessons was reviewed through three Military Judgement Panel cycles producing the single synthesis ' the golden thread ' and eight ' silver bullets ' as themes to institutionalise the learning to deliver the golden thread. One additional theme, mentoring indigenous healthcare systems and providers, emerged as a completely new capability requirement. The DMS has established a programme of work to implement these lessons. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  15. Optimizing water purchases for an Environmental Water Account

    NASA Astrophysics Data System (ADS)

    Lund, J. R.; Hollinshead, S. P.

    2005-12-01

    State and federal agencies in California have established an Environmental Water Account (EWA) to buy water to protect endangered fish in the San Francisco Bay/ Sacramento-San Joaquin Delta Estuary. This paper presents a three-stage probabilistic optimization model that identifies least-cost strategies for purchasing water for the EWA given hydrologic, operational, and biological uncertainties. This approach minimizes the expected cost of long-term, spot, and option water purchases to meet uncertain flow dedications for fish. The model prescribes the location, timing, and type of optimal water purchases and can illustrate how least-cost strategies change with hydrologic, operational, biological, and cost inputs. Details of the optimization model's application to California's EWA are provided with a discussion of its utility for strategic planning and policy purposes. Limitations in and sensitivity analysis of the model's representation of EWA operations are discussed, as are operational and research recommendations.

  16. Particle Engineering in Pharmaceutical Solids Processing: Surface Energy 
Considerations

    PubMed Central

    Williams, Daryl R.

    2015-01-01

    During the past 10 years particle engineering in the pharmaceutical industry has become a topic of increasing importance. Engineers and pharmacists need to understand and control a range of key unit manufacturing operations such as milling, granulation, crystallisation, powder mixing and dry powder inhaled drugs which can be very challenging. It has now become very clear that in many of these particle processing operations, the surface energy of the starting, intermediate or final products is a key factor in understanding the processing operation and or the final product performance. This review will consider the surface energy and surface energy heterogeneity of crystalline solids, methods for the measurement of surface energy, effects of milling on powder surface energy, adhesion and cohesion on powder mixtures, crystal habits and surface energy, surface energy and powder granulation processes, performance of DPI systems and finally crystallisation conditions and surface energy. This review will conclude that the importance of surface energy as a significant factor in understanding the performance of many particulate pharmaceutical products and processes has now been clearly established. It is still nevertheless, work in progress both in terms of development of methods and establishing the limits for when surface energy is the key variable of relevance. PMID:25876912

  17. Providing surgical care in Somalia: A model of task shifting.

    PubMed

    Chu, Kathryn M; Ford, Nathan P; Trelles, Miguel

    2011-07-15

    Somalia is one of the most political unstable countries in the world. Ongoing insecurity has forced an inconsistent medical response by the international community, with little data collection. This paper describes the "remote" model of surgical care by Medecins Sans Frontieres, in Guri-El, Somalia. The challenges of providing the necessary prerequisites for safe surgery are discussed as well as the successes and limitations of task shifting in this resource-limited context. In January 2006, MSF opened a project in Guri-El located between Mogadishu and Galcayo. The objectives were to reduce mortality due to complications of pregnancy and childbirth and from violent and non-violent trauma. At the start of the program, expatriate surgeons and anesthesiologists established safe surgical practices and performed surgical procedures. After January 2008, expatriates were evacuated due to insecurity and surgical care has been provided by local Somalian doctors and nurses with periodic supervisory visits from expatriate staff. Between October 2006 and December 2009, 2086 operations were performed on 1602 patients. The majority (1049, 65%) were male and the median age was 22 (interquartile range, 17-30). 1460 (70%) of interventions were emergent. Trauma accounted for 76% (1585) of all surgical pathology; gunshot wounds accounted for 89% (584) of violent injuries. Operative mortality (0.5% of all surgical interventions) was not higher when Somalian staff provided care compared to when expatriate surgeons and anesthesiologists. The delivery of surgical care in any conflict-settings is difficult, but in situations where international support is limited, the challenges are more extreme. In this model, task shifting, or the provision of services by less trained cadres, was utilized and peri-operative mortality remained low demonstrating that safe surgical practices can be accomplished even without the presence of fully trained surgeon and anesthesiologists. If security improves in Somalia, on-site training by expatriate surgeons and anesthesiologists will be re-established. Until then, the best way MSF has found to support surgical care in Somalia is continue to support in a "remote" manner.

  18. Characterizing Space Environments with Long-Term Space Plasma Archive Resources

    NASA Technical Reports Server (NTRS)

    Minow, Joseph I.; Miller, J. Scott; Diekmann, Anne M.; Parker, Linda N.

    2009-01-01

    A significant scientific benefit of establishing and maintaining long-term space plasma data archives is the ready access the archives afford to resources required for characterizing spacecraft design environments. Space systems must be capable of operating in the mean environments driven by climatology as well as the extremes that occur during individual space weather events. Long- term time series are necessary to obtain quantitative information on environment variability and extremes that characterize the mean and worst case environments that may be encountered during a mission. In addition, analysis of large data sets are important to scientific studies of flux limiting processes that provide a basis for establishing upper limits to environment specifications used in radiation or charging analyses. We present applications using data from existing archives and highlight their contributions to space environment models developed at Marshall Space Flight Center including the Chandra Radiation Model, ionospheric plasma variability models, and plasma models of the L2 space environment.

  19. Challenges for operational forecasting and early warning of rainfall induced landslides

    NASA Astrophysics Data System (ADS)

    Guzzetti, Fausto

    2017-04-01

    In many areas of the world, landslides occur every year, claiming lives and producing severe economic and environmental damage. Many of the landslides with human or economic consequences are the result of intense or prolonged rainfall. For this reason, in many areas the timely forecast of rainfall-induced landslides is of both scientific interest and social relevance. In the recent years, there has been a mounting interest and an increasing demand for operational landslide forecasting, and for associated landslide early warning systems. Despite the relevance of the problem, and the increasing interest and demand, only a few systems have been designed, and are currently operated. Inspection of the - limited - literature on operational landslide forecasting, and on the associated early warning systems, reveals that common criteria and standards for the design, the implementation, the operation, and the evaluation of the performances of the systems, are lacking. This limits the possibility to compare and to evaluate the systems critically, to identify their inherent strengths and weaknesses, and to improve the performance of the systems. Lack of common criteria and of established standards can also limit the credibility of the systems, and consequently their usefulness and potential practical impact. Landslides are very diversified phenomena, and the information and the modelling tools used to attempt landslide forecasting vary largely, depending on the type and size of the landslides, the extent of the geographical area considered, the timeframe of the forecasts, and the scope of the predictions. Consequently, systems for landslide forecasting and early warning can be designed and implemented at several different geographical scales, from the local (site or slope specific) to the regional, or even national scale. The talk focuses on regional to national scale landslide forecasting systems, and specifically on operational systems based on empirical rainfall threshold models. Building on the experience gained in designing, implementing, and operating national and regional landslide forecasting systems in Italy, and on a preliminary review of the existing literature on regional landslide early warning systems, the talk discusses concepts, limitations and challenges inherent to the design of reliable forecasting and early warning systems for rainfall-triggered landslides, the evaluation of the performances of the systems, and on problems related to the use of the forecasts and the issuing of landslide warnings. Several of the typical elements of an operational landslide forecasting system are considered, including: (i) the rainfall and landslide information used to establish the threshold models, (ii) the methods and tools used to define the empirical rainfall thresholds, and their associated uncertainty, (iii) the quality (e.g., the temporal and spatial resolution) of the rainfall information used for operational forecasting, including rain gauge and radar measurements, satellite estimates, and quantitative weather forecasts, (iv) the ancillary information used to prepare the forecasts, including e.g., the terrain subdivisions and the landslide susceptibility zonations, (v) the criteria used to transform the forecasts into landslide warnings and the methods used to communicate the warnings, and (vi) the criteria and strategies adopted to evaluate the performances of the systems, and to define minimum or optimal performance levels.

  20. Experimental investigation of gasoline compression ignition combustion in a light-duty diesel engine

    NASA Astrophysics Data System (ADS)

    Loeper, C. Paul

    Due to increased ignition delay and volatility, low temperature combustion (LTC) research utilizing gasoline fuel has experienced recent interest [1-3]. These characteristics improve air-fuel mixing prior to ignition allowing for reduced emissions of nitrogen oxides (NOx) and soot (or particulate matter, PM). Computational fluid dynamics (CFD) results at the University of Wisconsin-Madison's Engine Research Center (Ra et al. [4, 5]) have validated these attributes and established baseline operating parameters for a gasoline compression ignition (GCI) concept in a light-duty diesel engine over a large load range (3-16 bar net IMEP). In addition to validating these computational results, subsequent experiments at the Engine Research Center utilizing a single cylinder research engine based on a GM 1.9-liter diesel engine have progressed fundamental understanding of gasoline autoignition processes, and established the capability of critical controlling input parameters to better control GCI operation. The focus of this thesis can be divided into three segments: 1) establishment of operating requirements in the low-load operating limit, including operation sensitivities with respect to inlet temperature, and the capabilities of injection strategy to minimize NOx emissions while maintaining good cycle-to-cycle combustion stability; 2) development of novel three-injection strategies to extend the high load limit; and 3) having developed fundamental understanding of gasoline autoignition kinetics, and how changes in physical processes (e.g. engine speed effects, inlet pressure variation, and air-fuel mixture processes) affects operation, develop operating strategies to maintain robust engine operation. Collectively, experimental results have demonstrated the ability of GCI strategies to operate over a large load-speed range (3 bar to 17.8 bar net IMEP and 1300-2500 RPM, respectively) with low emissions (NOx and PM less than 1 g/kg-FI and 0.2 g/kg-FI, respectively), and low fuel consumption (gross indicated fuel consumption <200 g/kWh). [1] Dec, J. E., Yang, Y., and Dronniou, N., 2011, "Boosted HCCI - Controlling Pressure- Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline," SAE Int. J. Engines, 4(1), pp. 1169-1189. [2] Kalghatgi, G., Hildingsson, L., and Johansson, B., 2010, "Low NO(x) and Low Smoke Operation of a Diesel Engine Using Gasolinelike Fuels," Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 132(9), p. 9. [3] Manente, V., Zander, C.-G., Johansson, B., Tunestal, P., and Cannella, W., 2010, "An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially Premixed Combustion," SAE International, 2010-01-2198. [4] Ra, Y., Loeper, P., Reitz, R., Andrie, M., Krieger, R., Foster, D., Durrett, R., Gopalakrishnan, V., Plazas, A., Peterson, R., and Szymkowicz, P., 2011, "Study of High Speed Gasoline Direct Injection Compression Ignition (GDICI) Engine Operation in the LTC Regime," SAE Int. J. Engines, 4(1), pp. 1412-1430. [5] Ra, Y., Loeper, P., Andrie, M., Krieger, R., Foster, D., Reitz, R., and Durrett, R., 2012, "Gasoline DICI Engine Operation in the LTC Regime Using Triple- Pulse Injection," SAE Int. J. Engines, 5(3), pp. 1109-1132.

  1. Overcoming the energetic limitations of syngas fermentation.

    PubMed

    Molitor, Bastian; Marcellin, Esteban; Angenent, Largus T

    2017-12-01

    The fermentation of synthesis gas (including carbon monoxide, carbon dioxide, and hydrogen) with anaerobic acetogens is an established biotechnological process that has recently been transferred to a commercial scale. The natural product spectrum of acetogens is natively restricted to acetate, ethanol, and 2,3-butanediol but is rapidly expanding to heterologous products. Syngas fermentation can achieve high carbon-efficiencies; however, the underlying metabolism is operating at a thermodynamic limit. This necessitates special enzymatic properties for energy conservation by acetogens. Therefore, the availability of cellular energy is considered to restrain the efficient production of energy-intense products with complex production pathways. The optimization of the feed-gas composition and other process parameters, genetic engineering, and integration with other biotechnologies is required to overcome this limitation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Design and Application of the Exploration Maintainability Analysis Tool

    NASA Technical Reports Server (NTRS)

    Stromgren, Chel; Terry, Michelle; Crillo, William; Goodliff, Kandyce; Maxwell, Andrew

    2012-01-01

    Conducting human exploration missions beyond Low Earth Orbit (LEO) will present unique challenges in the areas of supportability and maintainability. The durations of proposed missions can be relatively long and re-supply of logistics, including maintenance and repair items, will be limited or non-existent. In addition, mass and volume constraints in the transportation system will limit the total amount of logistics that can be flown along with the crew. These constraints will require that new strategies be developed with regards to how spacecraft systems are designed and maintained. NASA is currently developing Design Reference Missions (DRMs) as an initial step in defining future human missions. These DRMs establish destinations and concepts of operation for future missions, and begin to define technology and capability requirements. Because of the unique supportability challenges, historical supportability data and models are not directly applicable for establishing requirements for beyond LEO missions. However, supportability requirements could have a major impact on the development of the DRMs. The mass, volume, and crew resources required to support the mission could all be first order drivers in the design of missions, elements, and operations. Therefore, there is a need for enhanced analysis capabilities to more accurately establish mass, volume, and time requirements for supporting beyond LEO missions. Additionally, as new technologies and operations are proposed to reduce these requirements, it is necessary to have accurate tools to evaluate the efficacy of those approaches. In order to improve the analysis of supportability requirements for beyond LEO missions, the Space Missions Analysis Branch at the NASA Langley Research Center is developing the Exploration Maintainability Analysis Tool (EMAT). This tool is a probabilistic simulator that evaluates the need for repair and maintenance activities during space missions and the logistics and crew requirements to support those activities. Using a Monte Carlo approach, the tool simulates potential failures in defined systems, based on established component reliabilities, and then evaluates the capability of the crew to repair those failures given a defined store of spares and maintenance items. Statistical analysis of Monte Carlo runs provides probabilistic estimates of overall mission safety and reliability. This paper will describe the operation of the EMAT, including historical data sources used to populate the model, simulation processes, and outputs. Analysis results are provided for a candidate exploration system, including baseline estimates of required sparing mass and volume. Sensitivity analysis regarding the effectiveness of proposed strategies to reduce mass and volume requirements and improve mission reliability is included in these results.

  3. Establishment of Korean Nuclear Ombudsman System Importing Compensation and Insurance Concept for Residents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hyun Seok Ko; Yong Min Kim; Young Wook Lee

    2006-07-01

    In Korea, the nuclear power generation is grown technically well. Already, 20 nuclear reactors are operated, and approximate they supply the 40% of whole the consumption of electric power. This is the driving force of Korean industrial development. Besides, Korean Standard Nuclear Power Plant that was developed by Korean self-technique with nuclear plant technique independence, Ul-Chin 6 has started the commercial operation. Advanced Korean Standard Nuclear Power Plant, new Gori 1, 2 constructions are commenced. But, past days Korean situation is that intention of residents is neglected in the decision making process of nuclear power plant construction and operation. Inmore » existing decision making process, it is regarded as the role of public opinion is secondary, and the problem of decision making process is that public is persuaded and believed. So, in decision making process, the public opinion is considered restrictively, there is not the actual public participation. Therefore the dissatisfaction of public is increased continuously, and in Korea, bad recognition about nuclear power is getting full. The method of public participation for complement of this problem is public hearing or ombudsman system. The public hearing is ensuring public participation before decision of a case, and ombudsman is the system that elevates the public satisfaction through continuous feedback of public requirement to occur in deciding and performing the matters. In Korean situation, that present 20 nuclear reactors are operated and also the place of radioactive waste repository has been decided, not only the introduction of public hearing to decide the coming matter but also the operation of ombudsman system to continuously correct and collect the public requirements about the matter to already decided and operated is necessary. In Korea, administration type ombudsman is operated now. But, it has operated without basic element at the aspect of organization, function and phase. So it is not established a firm phase as right relief body to be believed by public with lack of independence, authority and specialty. Therefore the establishment of organization that can be the role as special ombudsman organization about sensitive and special matter like nuclear matter is necessary. Definite establishment element of ombudsman system is to introduce of congress type ombudsman element, to be permanent standing system ombudsman, to limit jurisdiction extent and have strong authority, to be able to access easily, to be composed of legal and nuclear specialist. One of important requirements of resident is compensation. So, based on the resident compensation theory about aversion equipment, ombudsman system should be established introducing the insurance theory through risk management as functional background for appropriate compensation. (authors)« less

  4. ATLAS, an integrated structural analysis and design system. Volume 6: Design module theory

    NASA Technical Reports Server (NTRS)

    Backman, B. F.

    1979-01-01

    The automated design theory underlying the operation of the ATLAS Design Module is decribed. The methods, applications and limitations associated with the fully stressed design, the thermal fully stressed design and a regional optimization algorithm are presented. A discussion of the convergence characteristics of the fully stressed design is also included. Derivations and concepts specific to the ATLAS design theory are shown, while conventional terminology and established methods are identified by references.

  5. Commercialization of microfluidic devices.

    PubMed

    Volpatti, Lisa R; Yetisen, Ali K

    2014-07-01

    Microfluidic devices offer automation and high-throughput screening, and operate at low volumes of consumables. Although microfluidics has the potential to reduce turnaround times and costs for analytical devices, particularly in medical, veterinary, and environmental sciences, this enabling technology has had limited diffusion into consumer products. This article analyzes the microfluidics market, identifies issues, and highlights successful commercialization strategies. Addressing niche markets and establishing compatibility with existing workflows will accelerate market penetration. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Jungle Skippers: The 317th Troop Carrier Group in the Southwest Pacific and Their Legacy

    DTIC Science & Technology

    2014-06-01

    to conduct airborne assaults in North Africa in November 1942 and Sicily in July 1943 suffered severe problems and produced limited results...1942. The commandos traveled northwest along the coast from Port Moresby for 225 kilometers to the Lakekamu River, before embarking in canoes “for days...the problem created by the harsh terrain of the Wau region. In April 1942, the Allies established Kanga Force to conduct operations in the Wau

  7. Exact results for the Floquet coin toss for driven integrable models

    NASA Astrophysics Data System (ADS)

    Bhattacharya, Utso; Maity, Somnath; Banik, Uddipan; Dutta, Amit

    2018-05-01

    We study an integrable Hamiltonian reducible to free fermions, which is subjected to an imperfect periodic driving with the amplitude of driving (or kicking), randomly chosen from a binary distribution like a coin-toss problem. The randomness present in the driving protocol destabilizes the periodic steady state reached in the limit of perfectly periodic driving, leading to a monotonic rise of the stroboscopic residual energy with the number of periods (N ) for such Hamiltonians. We establish that a minimal deviation from the perfectly periodic driving in the present case using such protocols would always result in a bounded heating up of the system with N to an asymptotic finite value. Exploiting the completely uncorrelated nature of the randomness and the knowledge of the stroboscopic Floquet operator in the perfectly periodic situation, we provide an exact analytical formalism to derive the disorder averaged expectation value of the residual energy through a disorder operator. This formalism not only leads to an immense numerical simplification, but also enables us to derive an exact analytical form for the residual energy in the asymptotic limit which is universal, i.e., independent of the bias of coin-toss and the protocol chosen. Furthermore, this formalism clearly establishes the nature of the monotonic growth of the residual energy at intermediate N while clearly revealing the possible nonuniversal behavior of the same.

  8. Hybrid-PIC Modeling of a High-Voltage, High-Specific-Impulse Hall Thruster

    NASA Technical Reports Server (NTRS)

    Smith, Brandon D.; Boyd, Iain D.; Kamhawi, Hani; Huang, Wensheng

    2013-01-01

    The primary life-limiting mechanism of Hall thrusters is the sputter erosion of the discharge channel walls by high-energy propellant ions. Because of the difficulty involved in characterizing this erosion experimentally, many past efforts have focused on numerical modeling to predict erosion rates and thruster lifespan, but those analyses were limited to Hall thrusters operating in the 200-400V discharge voltage range. Thrusters operating at higher discharge voltages (V(sub d) >= 500 V) present an erosion environment that may differ greatly from that of the lower-voltage thrusters modeled in the past. In this work, HPHall, a well-established hybrid-PIC code, is used to simulate NASA's High-Voltage Hall Accelerator (HiVHAc) at discharge voltages of 300, 400, and 500V as a first step towards modeling the discharge channel erosion. It is found that the model accurately predicts the thruster performance at all operating conditions to within 6%. The model predicts a normalized plasma potential profile that is consistent between all three operating points, with the acceleration zone appearing in the same approximate location. The expected trend of increasing electron temperature with increasing discharge voltage is observed. An analysis of the discharge current oscillations shows that the model predicts oscillations that are much greater in amplitude than those measured experimentally at all operating points, suggesting that the differences in oscillation amplitude are not strongly associated with discharge voltage.

  9. Evaluation of Agency Non-Code Layered Pressure Vessels (LPVs)

    NASA Technical Reports Server (NTRS)

    Prosser, William H.

    2014-01-01

    In coordination with the Office of Safety and Mission Assurance and the respective Center Pressure System Managers (PSMs), the NASA Engineering and Safety Center (NESC) was requested to formulate a consensus draft proposal for the development of additional testing and analysis methods to establish the technical validity, and any limitation thereof, for the continued safe operation of facility non-code layered pressure vessels. The PSMs from each NASA Center were asked to participate as part of the assessment team by providing, collecting, and reviewing data regarding current operations of these vessels. This report contains the outcome of the assessment and the findings, observations, and NESC recommendations to the Agency and individual NASA Centers.

  10. Evaluation of Agency Non-Code Layered Pressure Vessels (LPVs). Corrected Copy, Aug. 25, 2014

    NASA Technical Reports Server (NTRS)

    Prosser, William H.

    2014-01-01

    In coordination with the Office of Safety and Mission Assurance and the respective Center Pressure System Managers (PSMs), the NASA Engineering and Safety Center (NESC) was requested to formulate a consensus draft proposal for the development of additional testing and analysis methods to establish the technical validity, and any limitation thereof, for the continued safe operation of facility non-code layered pressure vessels. The PSMs from each NASA Center were asked to participate as part of the assessment team by providing, collecting, and reviewing data regarding current operations of these vessels. This report contains the outcome of the assessment and the findings, observations, and NESC recommendations to the Agency and individual NASA Centers.

  11. Building an Economical and Sustainable Lunar Infrastructure to Enable Lunar Science and Space Commerce

    NASA Technical Reports Server (NTRS)

    Zuniga, Allison; Turner, Mark; Rasky, Dan

    2017-01-01

    A new concept study was initiated to examine the framework needed to gradually develop an economical and sustainable lunar infrastructure using a public private partnerships approach. This approach would establish partnership agreements between NASA and industry teams to develop cis-lunar and surface capabilities for mutual benefit while sharing cost and risk in the development phase and then allowing for transfer of operation of these infrastructure services back to its industry owners in the execution phase. These infrastructure services may include but are not limited to the following: lunar cargo transportation, power stations, energy storage devices, communication relay satellites, local communication towers, and surface mobility operations.

  12. Scientific management of Space Telescope

    NASA Technical Reports Server (NTRS)

    Odell, C. R.

    1981-01-01

    A historical summay is given on the science management of the Space Telescope, the inception of which began in 1962, when scientists and engineers first recommended the development of a nearly diffraction limited substantial-size optical telescope. Phase A, the feasibility requirements generation phase, began in 1971 and consisted largely of NASA scientists and a NASA design. Phase B, the preliminary design phase, established a tiered structure of scientists, led by the Large Space Telescope operations and Management Work Group. A Mission Operations Working Group headed six instrument definition teams to develop the essential instrument definitions. Many changes took place during Phase B, before design and development, which began in 1978 and still continues today.

  13. Multi-objective Operation Chart Optimization for Aquatic Species Habitat Conservation of Cascaded Hydropower System on Yuan River, Southwestern China

    NASA Astrophysics Data System (ADS)

    Wen, X.; Lei, X.; Fang, G.; Huang, X.

    2017-12-01

    Extensive cascading hydropower exploitation in southwestern China has been the subject of debate and conflict in recent years. Introducing limited ecological curves, a novel approach for derivation of hydropower-ecological joint operation chart of cascaded hydropower system was proposed, aiming to optimize the general hydropower and ecological benefits, and to alleviate the ecological deterioration in specific flood/dry conditions. The physical habitat simulation model is proposed initially to simulate the relationship between streamflow and physical habitat of target fish species and to determine the optimal ecological flow range of representative reach. The ecological—hydropower joint optimization model is established to produce the multi-objective operation chart of cascaded hydropower system. Finally, the limited ecological guiding curves were generated and added into the operation chart. The JS-MDS cascaded hydropower system on the Yuan River in southwestern China is employed as the research area. As the result, the proposed guiding curves could increase the hydropower production amount by 1.72% and 5.99% and optimize ecological conservation degree by 0.27% and 1.13% for JS and MDS Reservoir, respectively. Meanwhile, the ecological deterioration rate also sees a decrease from 6.11% to 1.11% for JS Reservoir and 26.67% to 3.89% for MDS Reservoir.

  14. a Micro-Uav with the Capability of Direct Georeferencing

    NASA Astrophysics Data System (ADS)

    Rehak, M.; Mabillard, R.; Skaloud, J.

    2013-08-01

    This paper presents the development of a low cost UAV (Unmanned Aerial Vehicle) with the capability of direct georeferencing. The advantage of such system lies in its high maneuverability, operation flexibility as well as capability to acquire image data without the need of establishing ground control points (GCPs). Moreover, the precise georeferencing offers an improvement in the final mapping accuracy when employing integrated sensor orientation. Such mode of operation limits the number and distribution of GCPs, which in turns save time in their signalization and surveying. Although the UAV systems feature high flexibility and capability of flying into areas that are inhospitable or inaccessible to humans, the lack of precision in positioning and attitude estimation on-board decrease the gained value of the captured imagery and limits their mode of operation to specific configurations and need of groundreference. Within a scope of this study we show the potential of present technologies in the field of position and orientation determination on a small UAV. The hardware implementation and especially the non-trivial synchronization of all components is clarified. Thanks to the implementation of a multi-frequency, low power GNSS receiver and its coupling with redundant MEMSIMU, we can attain the characteristic of a much larger systems flown on large carries while keeping the sensor size and weight suitable for MAV operations.

  15. Chirped Pulse Spectrometer Operating at 200 GHz

    NASA Astrophysics Data System (ADS)

    Hindle, Francis; Bray, Cédric; Hickson, Kevin; Fontanari, Daniele; Mouelhi, Meriem; Cuisset, Arnaud; Mouret, Gaël; Bocquet, Robin

    2018-01-01

    The combination of electronic sources operating at high frequencies and modern microwave instrumentation has enabled the recent development of chirped pulse spectrometers for the millimetre and THz bands. This type of instrument can operate at high resolution which is particularly suited to gas-phase rotational spectroscopy. The construction of a chirped pulse spectrometer operating at 200 GHz is described in detail while attention is paid to the phase stability and the data accumulation over many cycles. Validation using carbonyl sulphide has allowed the detection limit of the instrument to be established as function of the accumulation. A large number of OCS transitions were identified using a 10-GHz chirped pulse and include the six most abundant isotopologues, the weakest line corresponding to the fundamental R(17) transition of 16O13C33S with a line strength of 4.3 × 10-26 cm-1/(molecule cm-2). The linearity of the system response for different degrees of data accumulation and transition line strength was confirmed over four orders of magnitudes. A simple analysis of the time-domain data was demonstrated to provide the line-broadening coefficient without the need for conversion by a Fourier transform. Finally, the pulse duration is discussed and optimal values are given for both Doppler-limited and collisional regimes.

  16. 7 CFR 610.23 - State Technical Committee meetings.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

  17. 7 CFR 610.23 - State Technical Committee meetings.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

  18. 7 CFR 610.23 - State Technical Committee meetings.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

  19. 7 CFR 610.23 - State Technical Committee meetings.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

  20. 7 CFR 610.23 - State Technical Committee meetings.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top