Life-cycle energy and GHG emissions of forest biomass harvest and transport for biofuel production in Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang

High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncoveredmore » that ethanol production is more environmentally friendly (about 62% less greenhouse gas emissions) compared with petroleum based fossil fuel production. Sensitivity analysis was conducted with key inputs associated with harvesting and transportation operations. The results showed that research focused on improving biomass recovery efficiency and truck fuel economy further reduced GHG emissions and energy consumption.« less

Quantifying the Impact of Feedstock Quality on the Design of Bioenergy Supply Chain Networks

DOE PAGES

Castillo-Villar, Krystel; Minor-Popocatl, Hertwin; Webb, Erin

2016-03-01

Logging residues, which refer to the unused portions of trees cut during logging, are important sources of biomass for the emerging biofuel industry and are critical feedstocks for the first-type biofuel facilities (e.g., corn-ethanol facilities). Logging residues are under-utilized sources of biomass for energetic purposes. To support the scaling-up of the bioenergy industry, it is essential to design cost-effective biofuel supply chains that not only minimize costs, but also consider the biomass quality characteristics. The biomass quality is heavily dependent upon the moisture and the ash contents. Ignoring the biomass quality characteristics and its intrinsic costs may yield substantial economicmore » losses that will only be discovered after operations at a biorefinery have begun. Here this paper proposes a novel bioenergy supply chain network design model that minimizes operational costs and includes the biomass quality-related costs. The proposed model is unique in the sense that it supports decisions where quality is not unrealistically assumed to be perfect. The effectiveness of the proposed methodology is proven by assessing a case study in the state of Tennessee, USA. The results demonstrate that the ash and moisture contents of logging residues affect the performance of the supply chain (in monetary terms). Higher-than-target moisture and ash contents incur in additional quality-related costs. The quality-related costs in the optimal solution (with final ash content of 1% and final moisture of 50%) account for 27% of overall supply chain cost. In conclusion, based on the numeral experimentation, the total supply chain cost increased 7%, on average, for each additional percent in the final ash content.« less

Quantifying the Impact of Feedstock Quality on the Design of Bioenergy Supply Chain Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castillo-Villar, Krystel; Minor-Popocatl, Hertwin; Webb, Erin

Logging residues, which refer to the unused portions of trees cut during logging, are important sources of biomass for the emerging biofuel industry and are critical feedstocks for the first-type biofuel facilities (e.g., corn-ethanol facilities). Logging residues are under-utilized sources of biomass for energetic purposes. To support the scaling-up of the bioenergy industry, it is essential to design cost-effective biofuel supply chains that not only minimize costs, but also consider the biomass quality characteristics. The biomass quality is heavily dependent upon the moisture and the ash contents. Ignoring the biomass quality characteristics and its intrinsic costs may yield substantial economicmore » losses that will only be discovered after operations at a biorefinery have begun. Here this paper proposes a novel bioenergy supply chain network design model that minimizes operational costs and includes the biomass quality-related costs. The proposed model is unique in the sense that it supports decisions where quality is not unrealistically assumed to be perfect. The effectiveness of the proposed methodology is proven by assessing a case study in the state of Tennessee, USA. The results demonstrate that the ash and moisture contents of logging residues affect the performance of the supply chain (in monetary terms). Higher-than-target moisture and ash contents incur in additional quality-related costs. The quality-related costs in the optimal solution (with final ash content of 1% and final moisture of 50%) account for 27% of overall supply chain cost. In conclusion, based on the numeral experimentation, the total supply chain cost increased 7%, on average, for each additional percent in the final ash content.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Jason K.; Jacobson, Jacob J.; Cafferty, Kara G.

In order to increase the sustainability and security of the nation’s energy supply, the U.S. Department of Energy through its Bioenergy Technology Office has set a vision for one billion tons of biomass to be processed for renewable energy and bioproducts annually by the year 2030. The Renewable Fuels Standard limits the amount of corn grain that can be used in ethanol conversion sold in the U.S, which is already at its maximum. Therefore making the DOE’s vision a reality requires significant growth in the advanced biofuels industry where currently three cellulosic biorefineries convert cellulosic biomass to ethanol. Risk mitigationmore » is central to growing the industry beyond its infancy to a level necessary to achieve the DOE vision. This paper focuses on reducing the supply risk that faces a firm that owns a cellulosic biorefinery. It uses risk theory and simulation modeling to build a risk assessment model based on causal relationships of underlying, uncertain, supply driving variables. Using the model the paper quantifies supply risk reduction achieved by converting the supply chain from a conventional supply system (bales and trucks) to an advanced supply system (depots, pellets, and trains). Results imply that the advanced supply system reduces supply system risk, defined as the probability of a unit cost overrun, from 83% in the conventional system to 4% in the advanced system. Reducing cost risk in this nascent industry improves the odds of realizing desired growth.« less

Quantifying Supply Risk at a Cellulosic Biorefinery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Jason K; Jacobson, Jacob Jordan; Cafferty, Kara Grace

In order to increase the sustainability and security of the nation’s energy supply, the U.S. Department of Energy through its Bioenergy Technology Office has set a vision for one billion tons of biomass to be processed for renewable energy and bioproducts annually by the year 2030. The Renewable Fuels Standard limits the amount of corn grain that can be used in ethanol conversion sold in the U.S, which is already at its maximum. Therefore making the DOE’s vision a reality requires significant growth in the advanced biofuels industry where currently three cellulosic biorefineries convert cellulosic biomass to ethanol. Risk mitigationmore » is central to growing the industry beyond its infancy to a level necessary to achieve the DOE vision. This paper focuses on reducing the supply risk that faces a firm that owns a cellulosic biorefinery. It uses risk theory and simulation modeling to build a risk assessment model based on causal relationships of underlying, uncertain, supply driving variables. Using the model the paper quantifies supply risk reduction achieved by converting the supply chain from a conventional supply system (bales and trucks) to an advanced supply system (depots, pellets, and trains). Results imply that the advanced supply system reduces supply system risk, defined as the probability of a unit cost overrun, from 83% in the conventional system to 4% in the advanced system. Reducing cost risk in this nascent industry improves the odds of realizing desired growth.« less

The impact of biotechnological advances on the future of US bioenergy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davison, Brian H.; Brandt, Craig C.; Guss, Adam M.

Modern biotechnology has the potential to substantially advance the feasibility, structure, and efficiency of future biofuel supply chains. Advances might be direct or indirect. A direct advance would be improving the efficiency of biochemical conversion processes and feedstock production. Direct advances in processing may involve developing improved enzymes and bacteria to convert lignocellulosic feedstocks to ethanol. Progress in feedstock production could include enhancing crop yields via genetic modification or the selection of specific natural variants and breeds. Other direct results of biotechnology might increase the production of fungible biofuels and bioproducts, which would impact the supply chain. Indirect advances mightmore » include modifications to dedicated bioenergy crops that enable them to grow on marginal lands rather than land needed for food production. This study assesses the feasibility and advantages of near-future (10-year) biotechnological developments for a US biomass-based supply chain for bioenergy production. We assume a simplified supply chain of feedstock, logistics and land use, conversion, and products and utilization. The primary focus is how likely developments in feedstock production and conversion technologies will impact bioenergy and biofuels in the USA; a secondary focus is other innovative uses of biotechnologies in the energy arenas. The assessment addresses near-term biofuels based on starch, sugar, and cellulosic feedstocks and considers some longer-term options, such as oil-crop and algal technologies.« less

The impact of biotechnological advances on the future of US bioenergy

DOE PAGES

Davison, Brian H.; Brandt, Craig C.; Guss, Adam M.; ...

2015-05-14

Modern biotechnology has the potential to substantially advance the feasibility, structure, and efficiency of future biofuel supply chains. Advances might be direct or indirect. A direct advance would be improving the efficiency of biochemical conversion processes and feedstock production. Direct advances in processing may involve developing improved enzymes and bacteria to convert lignocellulosic feedstocks to ethanol. Progress in feedstock production could include enhancing crop yields via genetic modification or the selection of specific natural variants and breeds. Other direct results of biotechnology might increase the production of fungible biofuels and bioproducts, which would impact the supply chain. Indirect advances mightmore » include modifications to dedicated bioenergy crops that enable them to grow on marginal lands rather than land needed for food production. This study assesses the feasibility and advantages of near-future (10-year) biotechnological developments for a US biomass-based supply chain for bioenergy production. We assume a simplified supply chain of feedstock, logistics and land use, conversion, and products and utilization. The primary focus is how likely developments in feedstock production and conversion technologies will impact bioenergy and biofuels in the USA; a secondary focus is other innovative uses of biotechnologies in the energy arenas. The assessment addresses near-term biofuels based on starch, sugar, and cellulosic feedstocks and considers some longer-term options, such as oil-crop and algal technologies.« less

Uncertainties in Life Cycle Greenhouse Gas Emissions from Advanced Biomass Feedstock Logistics Supply Chains in Kansas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cafferty, Kara G.; Searcy, Erin M.; Nguyen, Long

To meet Energy Independence and Security Act (EISA) cellulosic biofuel mandates, the United States will require an annual domestic supply of about 242 million Mg of biomass by 2022. To improve the feedstock logistics of lignocellulosic biofuels and access available biomass resources from areas with varying yields, commodity systems have been proposed and designed to deliver on-spec biomass feedstocks at preprocessing “depots”, which densify and stabilize the biomass prior to long-distance transport and delivery to centralized biorefineries. The harvesting, preprocessing, and logistics (HPL) of biomass commodity supply chains thus could introduce spatially variable environmental impacts into the biofuel life cyclemore » due to needing to harvest, move, and preprocess biomass from multiple distances that have variable spatial density. This study examines the uncertainty in greenhouse gas (GHG) emissions of corn stover logisticsHPL within a bio-ethanol supply chain in the state of Kansas, where sustainable biomass supply varies spatially. Two scenarios were evaluated each having a different number of depots of varying capacity and location within Kansas relative to a central commodity-receiving biorefinery to test GHG emissions uncertainty. Monte Carlo simulation was used to estimate the spatial uncertainty in the HPL gate-to-gate sequence. The results show that the transport of densified biomass introduces the highest variability and contribution to the carbon footprint of the logistics HPL supply chain (0.2-13 g CO 2e/MJ). Moreover, depending upon the biomass availability and its spatial density and surrounding transportation infrastructure (road and rail), logistics HPL processes can increase the variability in life cycle environmental impacts for lignocellulosic biofuels. Within Kansas, life cycle GHG emissions could range from 24 to 41 g CO 2e/MJ depending upon the location, size and number of preprocessing depots constructed. However, this range can be minimized through optimizing the siting of preprocessing depots where ample rail infrastructure exists to supply biomass commodity to a regional biorefinery supply system« less

Uncertainties in Life Cycle Greenhouse Gas Emissions from Advanced Biomass Feedstock Logistics Supply Chains in Kansas

DOE PAGES

Cafferty, Kara G.; Searcy, Erin M.; Nguyen, Long; ...

2014-11-04

To meet Energy Independence and Security Act (EISA) cellulosic biofuel mandates, the United States will require an annual domestic supply of about 242 million Mg of biomass by 2022. To improve the feedstock logistics of lignocellulosic biofuels and access available biomass resources from areas with varying yields, commodity systems have been proposed and designed to deliver on-spec biomass feedstocks at preprocessing “depots”, which densify and stabilize the biomass prior to long-distance transport and delivery to centralized biorefineries. The harvesting, preprocessing, and logistics (HPL) of biomass commodity supply chains thus could introduce spatially variable environmental impacts into the biofuel life cyclemore » due to needing to harvest, move, and preprocess biomass from multiple distances that have variable spatial density. This study examines the uncertainty in greenhouse gas (GHG) emissions of corn stover logisticsHPL within a bio-ethanol supply chain in the state of Kansas, where sustainable biomass supply varies spatially. Two scenarios were evaluated each having a different number of depots of varying capacity and location within Kansas relative to a central commodity-receiving biorefinery to test GHG emissions uncertainty. Monte Carlo simulation was used to estimate the spatial uncertainty in the HPL gate-to-gate sequence. The results show that the transport of densified biomass introduces the highest variability and contribution to the carbon footprint of the logistics HPL supply chain (0.2-13 g CO 2e/MJ). Moreover, depending upon the biomass availability and its spatial density and surrounding transportation infrastructure (road and rail), logistics HPL processes can increase the variability in life cycle environmental impacts for lignocellulosic biofuels. Within Kansas, life cycle GHG emissions could range from 24 to 41 g CO 2e/MJ depending upon the location, size and number of preprocessing depots constructed. However, this range can be minimized through optimizing the siting of preprocessing depots where ample rail infrastructure exists to supply biomass commodity to a regional biorefinery supply system« less

Integrating multimodal transport into cellulosic biofuel supply chain design under feedstock seasonality with a case study based on California.

PubMed

Xie, Fei; Huang, Yongxi; Eksioglu, Sandra

2014-01-01

A multistage, mixed integer programing model was developed that fully integrates multimodal transport into the cellulosic biofuel supply chain design under feedstock seasonality. Three transport modes are considered: truck, single railcar, and unit train. The goal is to minimize the total cost for infrastructure, feedstock harvesting, biofuel production, and transportation. Strategic decisions including the locations and capacities of transshipment hubs, biorefineries, and terminals and tactical decisions on system operations are optimized in an integrated manner. When the model was implemented to a case study of cellulosic ethanol production in California, it was found that trucks are convenient for short-haul deliveries while rails are more effective for long-haul transportation. Taking the advantage of these benefits, the multimodal transport provides more cost effective solutions than the single-mode transport (truck). Copyright © 2013 Elsevier Ltd. All rights reserved.

[Study on different extracts of Chrysanthemum indicum by Fourier transform infrared spectroscopy].

PubMed

Zhang, Yan-Ling; Xia, Yuan; Tsogt; Zhou, Qun; Sun, Su-Qin

2012-12-01

According to the macro-fingerprint characteristic of infrared spectroscopy, Fourier transform infrared spectroscopy and second-derivative infrared spectroscopy were used to analyze the extracts of chrysanthemum indicum L. by different solvents. It was speculated preliminarily that the main component of petroleum ether extract was long chain fatty acids (esters) and terpenes of small molecules, ethyl acetate extract contains terpenes and flavonoids mainly, ethanol and 95% ethanol extract was mainly composed of flavonoids and flavonoid glycosides, and deionized water extract contains polysaccharides and tannins mainly. Besides, the content of flavonoids in ethanol extract is the highest by comparison of the infrared spectroscopy of different extracts with that of buddleoside. Thus, the infrared spectroscopy can analyze directly the extracts of traditional Chinese medicines, recognize the main ingredient preliminarily, and then supply directional reference for further planning the extract scheme and detection methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parish, Esther S.; Dale, Virginia H.; English, Burton C.

This paper connects the science of sustainability theory with applied aspects of sustainability deployment. A suite of 35 sustainability indicators spanning six environmental, three economic, and three social categories has been proposed for comparing the sustainability of bioenergy production systems across different feedstock types and locations. A recent demonstration-scale switchgrass-to-ethanol production system located in East Tennessee is used to assess the availability of sustainability indicator data and associated measurements for the feedstock production and logistics portions of the biofuel supply chain. Knowledge pertaining to the available indicators is distributed within a hierarchical decision tree framework to generate an assessment ofmore » the overall sustainability of this no-till switchgrass production system relative to two alternative business-as-usual scenarios of unmanaged pasture and tilled corn production. The relative contributions of the social, economic and environmental information are determined for the overall trajectory of this bioenergy system s sustainability under each scenario. Within this East Tennessee context, switchgrass production shows potential for improving environmental and social sustainability trajectories without adverse economic impacts, thereby leading to potential for overall enhancement in sustainability within this local agricultural system. Given the early stages of cellulosic ethanol production, it is currently difficult to determine quantitative values for all 35 sustainability indicators across the entire biofuel supply chain. This case study demonstrates that integration of qualitative sustainability indicator ratings may increase holistic understanding of a bioenergy system in the absence of complete information.« less

MODEL BASED BIOMASS SYSTEM DESIGN OF FEEDSTOCK SUPPLY SYSTEMS FOR BIOENERGY PRODUCTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

David J. Muth, Jr.; Jacob J. Jacobson; Kenneth M. Bryden

Engineering feedstock supply systems that deliver affordable, high-quality biomass remains a challenge for the emerging bioenergy industry. Cellulosic biomass is geographically distributed and has diverse physical and chemical properties. Because of this feedstock supply systems that deliver cellulosic biomass resources to biorefineries require integration of a broad set of engineered unit operations. These unit operations include harvest and collection, storage, preprocessing, and transportation processes. Design decisions for each feedstock supply system unit operation impact the engineering design and performance of the other system elements. These interdependencies are further complicated by spatial and temporal variances such as climate conditions and biomassmore » characteristics. This paper develops an integrated model that couples a SQL-based data management engine and systems dynamics models to design and evaluate biomass feedstock supply systems. The integrated model, called the Biomass Logistics Model (BLM), includes a suite of databases that provide 1) engineering performance data for hundreds of equipment systems, 2) spatially explicit labor cost datasets, and 3) local tax and regulation data. The BLM analytic engine is built in the systems dynamics software package PowersimTM. The BLM is designed to work with thermochemical and biochemical based biofuel conversion platforms and accommodates a range of cellulosic biomass types (i.e., herbaceous residues, short- rotation woody and herbaceous energy crops, woody residues, algae, etc.). The BLM simulates the flow of biomass through the entire supply chain, tracking changes in feedstock characteristics (i.e., moisture content, dry matter, ash content, and dry bulk density) as influenced by the various operations in the supply chain. By accounting for all of the equipment that comes into contact with biomass from the point of harvest to the throat of the conversion facility and the change in characteristics, the BLM evaluates economic performance of the engineered system, as well as determining energy consumption and green house gas performance of the design. This paper presents a BLM case study delivering corn stover to produce cellulosic ethanol. The case study utilizes the BLM to model the performance of several feedstock supply system designs. The case study also explores the impact of temporal variations in climate conditions to test the sensitivity of the engineering designs. Results from the case study show that under certain conditions corn stover can be delivered to the cellulosic ethanol biorefinery for $35/dry ton.« less

Assessing multimetric aspects of sustainability: Application to a bioenergy crop production system in East Tennessee

DOE PAGES

Parish, Esther S.; Dale, Virginia H.; English, Burton C.; ...

2016-02-26

This paper connects the science of sustainability theory with applied aspects of sustainability deployment. A suite of 35 sustainability indicators spanning six environmental, three economic, and three social categories has been proposed for comparing the sustainability of bioenergy production systems across different feedstock types and locations. A recent demonstration-scale switchgrass-to-ethanol production system located in East Tennessee is used to assess the availability of sustainability indicator data and associated measurements for the feedstock production and logistics portions of the biofuel supply chain. Knowledge pertaining to the available indicators is distributed within a hierarchical decision tree framework to generate an assessment ofmore » the overall sustainability of this no-till switchgrass production system relative to two alternative business-as-usual scenarios of unmanaged pasture and tilled corn production. The relative contributions of the social, economic and environmental information are determined for the overall trajectory of this bioenergy system s sustainability under each scenario. Within this East Tennessee context, switchgrass production shows potential for improving environmental and social sustainability trajectories without adverse economic impacts, thereby leading to potential for overall enhancement in sustainability within this local agricultural system. Given the early stages of cellulosic ethanol production, it is currently difficult to determine quantitative values for all 35 sustainability indicators across the entire biofuel supply chain. This case study demonstrates that integration of qualitative sustainability indicator ratings may increase holistic understanding of a bioenergy system in the absence of complete information.« less

Energetic metabolism of Chromobacterium violaceum.

PubMed

Creczynski-Pasa, Tânia B; Antônio, Regina V

2004-03-31

Chromobacterium violaceum is a free-living microorganism, normally exposed to diverse environmental conditions; it has a versatile energy-generating metabolism. This bacterium is capable of exploiting a wide range of energy resources by using appropriate oxidases and reductases. This allows C. violaceum to live in both aerobic and anaerobic conditions. In aerobic conditions, C. violaceum is able to grow in a minimal medium with simple sugars, such as glucose, fructose, galactose, and ribose; both Embden-Meyerhoff, tricarboxylic acid and glyoxylate cycles are used. The respiratory chain supplies energy, as well as substrates for other metabolic pathways. Under anaerobic conditions, C. violaceum metabolizes glucose, producing acetic and formic acid, but not lactic acid or ethanol. C. violaceum is also able to use amino acids and lipids as an energy supply.

40 CFR 80.1660 - Prohibited acts.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., supply, offer for supply, store or transport gasoline, oxygenate, or ethanol denaturant that does not...) Causing violating gasoline, oxygenate, or ethanol denaturant to be in the distribution system. Cause gasoline, oxygenate, or ethanol denaturant to be in the distribution system which does not comply with an...

Bioenergy from stillage anaerobic digestion to enhance the energy balance ratio of ethanol production.

PubMed

Fuess, Lucas Tadeu; Garcia, Marcelo Loureiro

2015-10-01

The challenges associated with the availability of fossil fuels in the past decades intensified the search for alternative energy sources, based on an ever-increasing demand for energy. In this context, the application of anaerobic digestion (AD) as a core treatment technology in industrial plants should be highlighted, since this process combines the pollution control of wastewaters and the generation of bioenergy, based on the conversion of the organic fraction to biogas, a methane-rich gaseous mixture that may supply the energetic demands in industrial plants. In this context, this work aimed at assessing the energetic potential of AD applied to the treatment of stillage, the main wastewater from ethanol production, in an attempt to highlight the improvements in the energy balance ratio of ethanol by inserting the heating value of methane as a bioenergy source. At least 5-15% of the global energy consumption in the ethanol industry could be supplied by the energetic potential of stillage, regardless the feedstock (i.e. sugarcane, corn or cassava). The association between bagasse combustion and stillage anaerobic digestion in sugarcane-based distilleries could provide a bioenergy surplus of at least 130% of the total fossil fuel input into the ethanol plant, considering only the energy from methane. In terms of financial aspects, the economic gains could reach US$ 0.1901 and US$ 0.0512 per liter of produced ethanol, respectively for molasses- (Brazil) and corn-based (EUA) production chains. For large-scale (∼1000 m(3)EtOH per day) Brazilian molasses-based plants, an annual economic gain of up to US$ 70 million could be observed. Considering the association between anaerobic and aerobic digestion, for the scenarios analyzed, at least 25% of the energetic potential of stillage would be required to supply the energy consumption with aeration, however, more suitable effluents for agricultural application could be produced. The main conclusion from this work indicates that anaerobic processes should be considered the core technology to treat stillage, based mainly on the attractive relation energy generation-financial return and on the possibility to keep the advantages inherent to the common fertigation when using the treated effluent in agriculture. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dietary fat sources differentially modulate intestinal barrier and hepatic inflammation in alcohol-induced liver injury in rats

PubMed Central

Zhong, Wei; Li, Qiong; Xie, Guoxiang; Sun, Xiuhua; Tan, Xiaobing; Sun, Xinguo; Jia, Wei

2013-01-01

Endotoxemia is a causal factor in the development of alcoholic liver injury. The present study aimed at determining the interactions of ethanol with different fat sources at the gut-liver axis. Male Sprague-Dawley rats were pair fed control or ethanol liquid diet for 8 wk. The liquid diets were based on a modified Lieber-DeCarli formula, with 30% total calories derived from corn oil (rich in polyunsaturated fatty acids). To test the effects of saturated fats, corn oil in the ethanol diet was replaced by either cocoa butter (CB, rich in long-chain saturated fatty acids) or medium-chain triglycerides (MCT, exclusively medium-chain saturated fatty acids). Ethanol feeding increased hepatic lipid accumulation and inflammatory cell infiltration and perturbed hepatic and serum metabolite profiles. Ethanol feeding with CB or MCT alleviated ethanol-induced liver injury and attenuated ethanol-induced metabolic perturbation. Both CB and MCT also normalized ethanol-induced hepatic macrophage activation, cytokine expression, and neutrophil infiltration. Ethanol feeding elevated serum endotoxin level, which was normalized by MCT but not CB. In accordance, ethanol-induced downregulations of intestinal occludin and zonula occludens-1 were normalized by MCT but not CB. However, CB normalized ethanol-increased hepatic endotoxin level in association with upregulation of an endotoxin detoxifying enzyme, argininosuccinate synthase 1 (ASS1). Knockdown ASS1 in H4IIEC3 cells resulted in impaired endotoxin clearance and upregulated cytokine expression. These data demonstrate that the protection of saturated fats against alcohol-induced liver injury occur via different actions at the gut-liver axis and are chain length dependent. PMID:24113767

Endogenous ethanol affects biopolyester molecular weight in recombinant Escherichia coli.

PubMed

Hiroe, Ayaka; Hyakutake, Manami; Thomson, Nicholas M; Sivaniah, Easan; Tsuge, Takeharu

2013-11-15

In biopolyester synthesis, polyhydroxyalkanoate (PHA) synthase (PhaC) catalyzes the polymerization of PHA in bacterial cells, followed by a chain transfer (CT) reaction in which the PHA polymer chain is transferred from PhaC to a CT agent. Accordingly, the frequency of CT reaction determines PHA molecular weight. Previous studies have shown that exogenous alcohols are effective CT agents. This study aimed to clarify the effect of endogenous ethanol as a CT agent for poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesis in recombinant Escherichia coli, by comparing with that of exogenous ethanol. Ethanol supplementation to the culture medium reduced P(3HB) molecular weights by up to 56% due to ethanol-induced CT reaction. NMR analysis of P(3HB) polymers purified from the culture supplemented with (13)C-labeled ethanol showed the formation of a covalent bond between ethanol and P(3HB) chain at the carboxyl end. Cultivation without ethanol supplementation resulted in the reduction of P(3HB) molecular weight with increasing host-produced ethanol depending on culture aeration. On the other hand, production in recombinant BW25113(ΔadhE), an alcohol dehydrogenase deletion strain, resulted in a 77% increase in molecular weight. Analysis of five E. coli strains revealed that the estimated number of CT reactions was correlated with ethanol production. These results demonstrate that host-produced ethanol acts as an equally effective CT agent as exogenous ethanol, and the control of ethanol production is important to regulate the PHA molecular weight.

Techno-economic analysis of using corn stover to supply heat and power to a corn ethanol plant - Part 1: Cost of feedstock supply logistics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sokhansanj, Shahabaddine; Mani, Sudhagar; Togore, Sam

2010-01-01

Supply of corn stover to produce heat and power for a typical 170 dam3 dry mill ethanol plant is proposed. The corn ethanol plant requires 5.6 MW of electricity and 52.3 MW of process heat, which creates the annual stover demand of as much as 140 Gg. The corn stover supply system consists of collection, preprocessing, transportation and on-site fuel storage and preparation to produce heat and power for the ethanol plant. Economics of the entire supply system was conducted using the Integrated Biomass Supply Analysis and Logistics (IBSAL) simulation model. Corn stover was delivered in three formats (square bales,more » dry chops and pellets) to the combined heat and power plant. Delivered cost of biomass ready to be burned was calculated at 73 $ Mg-1 for bales, 86 $ Mg-1 for pellets and 84 $ Mg-1 for field chopped biomass. Among the three formats of stover supply systems, delivered cost of pelleted biomass was the highest due to high pelleting cost. Bulk transport of biomass in the form of chops and pellets can provide a promising future biomass supply logistic system in the US, if the costs of pelleting and transport are minimized.« less

Short-Chain Polysaccharide Analysis in Ethanol-Water Solutions.

PubMed

Yan, Xun

2017-07-01

This study demonstrates that short-chain polysaccharides, or oligosaccharides, could be sufficiently separated with hydrophilic interaction LC (HILIC) conditions and quantified by evaporative light-scattering detection (ELSD). The multianalyte calibration approach improved the efficiency of calibrating the nonlinear detector response. The method allowed easy quantification of short-chain carbohydrates. Using the HILIC method, the oligosaccharide solubility and its profile in water/alcohol solutions at room temperature were able to be quantified. The results showed that the polysaccharide solubility in ethanol-water solutions decreased as ethanol content increased. The results also showed oligosaccharides to have minimal solubility in pure ethanol. In a saturated maltodextrin ethanol (80%) solution, oligosaccharide components with a degree of polymerization >12 were practically insoluble and contributed less than 0.2% to the total solute dry weight. The HILIC-ELSD method allows for the identification and quantification of low-MW carbohydrates individually and served as an alternative method to current gel permeation chromatography procedures.

Subcritical and supercritical technology for the production of second generation bioethanol.

PubMed

Rostagno, Mauricio A; Prado, Juliana M; Mudhoo, Ackmez; Santos, Diego T; Forster-Carneiro, Tânia; Meireles, M Angela A

2015-01-01

There is increased interest in reducing our reliance on fossil fuels and increasing the share of renewable raw materials in our energy supply chain due to environmental and economic concerns. Ethanol is emerging as a potential alternative to liquid fuels due to its eco-friendly characteristics and relatively low production costs. As ethanol is currently produced from commodities also used for human and animal consumption, there is an urgent need of identifying renewable raw materials that do not pose a competitive problem. Lignocellulosic agricultural residues are an ideal choice since they can be effectively hydrolyzed to fermentable sugars and integrated in the context of a biorefinery without competing with the food supply chain. However, the conventional hydrolysis methods still have major issues that need to be addressed. These issues are related to the processing rate and generation of fermentation inhibitors, which can compromise the quality of the product and the cost of the process. As the knowledge of the processes taking place during hydrolysis of agricultural residues is increasing, new techniques are being exploited to overcome these drawbacks. This review gives an overview of the state-of-the-art of hydrolysis with subcritical and supercritical water in the context of reusing agricultural residues for the production of suitable substrates to be processed during the fermentative production of bioethanol. Presently, subcritical and/or supercritical water hydrolysis has been found to yield low sugar contents mainly due to concurrent competing degradation of sugars during the hydrothermal processes. In this line of thinking, the present review also revisits the recent applications and advances to provide an insight of future research trends to optimize on the subcritical and supercritical process kinetics.

Analysis of supply chain management of shallots in Medan

NASA Astrophysics Data System (ADS)

Alam, M. C.; Supriana, T.

2018-02-01

Supply chain is important for business. One of supply chain that needs to be studied is the shallots supply chain. Medan have high demand while the supply of shallots is limited. This study aims to analyze the flow of shallots supply chain distribution in Medan. The method used was survey by using questionnaires to shallots producers, collecting traders, distributors, traders as well as government involved in shallots supply chain. Descriptive analysis was used to explain the shallots supply chain distribution flow. The results showed that there are two shallots supply chain model in Medan that was local shallots model and imported shallots model. Local shallots model could be distinguished based on three producer area, those were models of Medan Marelan, Samosir, and Simalungun. Medan Marelan and Simalungun models have seven supply chains, while the Samosir Model has eight supply chains. This condition indicates that the local shallots supply chain management in Medan was not efficient because of the length of the distribution channel. Supply chain imported shallots was more efficient because it had a shorter distribution flow with five supply chains.

Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels.

PubMed

Hill, Jason; Nelson, Erik; Tilman, David; Polasky, Stephen; Tiffany, Douglas

2006-07-25

Negative environmental consequences of fossil fuels and concerns about petroleum supplies have spurred the search for renewable transportation biofuels. To be a viable alternative, a biofuel should provide a net energy gain, have environmental benefits, be economically competitive, and be producible in large quantities without reducing food supplies. We use these criteria to evaluate, through life-cycle accounting, ethanol from corn grain and biodiesel from soybeans. Ethanol yields 25% more energy than the energy invested in its production, whereas biodiesel yields 93% more. Compared with ethanol, biodiesel releases just 1.0%, 8.3%, and 13% of the agricultural nitrogen, phosphorus, and pesticide pollutants, respectively, per net energy gain. Relative to the fossil fuels they displace, greenhouse gas emissions are reduced 12% by the production and combustion of ethanol and 41% by biodiesel. Biodiesel also releases less air pollutants per net energy gain than ethanol. These advantages of biodiesel over ethanol come from lower agricultural inputs and more efficient conversion of feedstocks to fuel. Neither biofuel can replace much petroleum without impacting food supplies. Even dedicating all U.S. corn and soybean production to biofuels would meet only 12% of gasoline demand and 6% of diesel demand. Until recent increases in petroleum prices, high production costs made biofuels unprofitable without subsidies. Biodiesel provides sufficient environmental advantages to merit subsidy. Transportation biofuels such as synfuel hydrocarbons or cellulosic ethanol, if produced from low-input biomass grown on agriculturally marginal land or from waste biomass, could provide much greater supplies and environmental benefits than food-based biofuels.

Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels

PubMed Central

Hill, Jason; Nelson, Erik; Tilman, David; Polasky, Stephen; Tiffany, Douglas

2006-01-01

Negative environmental consequences of fossil fuels and concerns about petroleum supplies have spurred the search for renewable transportation biofuels. To be a viable alternative, a biofuel should provide a net energy gain, have environmental benefits, be economically competitive, and be producible in large quantities without reducing food supplies. We use these criteria to evaluate, through life-cycle accounting, ethanol from corn grain and biodiesel from soybeans. Ethanol yields 25% more energy than the energy invested in its production, whereas biodiesel yields 93% more. Compared with ethanol, biodiesel releases just 1.0%, 8.3%, and 13% of the agricultural nitrogen, phosphorus, and pesticide pollutants, respectively, per net energy gain. Relative to the fossil fuels they displace, greenhouse gas emissions are reduced 12% by the production and combustion of ethanol and 41% by biodiesel. Biodiesel also releases less air pollutants per net energy gain than ethanol. These advantages of biodiesel over ethanol come from lower agricultural inputs and more efficient conversion of feedstocks to fuel. Neither biofuel can replace much petroleum without impacting food supplies. Even dedicating all U.S. corn and soybean production to biofuels would meet only 12% of gasoline demand and 6% of diesel demand. Until recent increases in petroleum prices, high production costs made biofuels unprofitable without subsidies. Biodiesel provides sufficient environmental advantages to merit subsidy. Transportation biofuels such as synfuel hydrocarbons or cellulosic ethanol, if produced from low-input biomass grown on agriculturally marginal land or from waste biomass, could provide much greater supplies and environmental benefits than food-based biofuels. PMID:16837571

From the Cover: Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels

NASA Astrophysics Data System (ADS)

Hill, Jason; Nelson, Erik; Tilman, David; Polasky, Stephen; Tiffany, Douglas

2006-07-01

Negative environmental consequences of fossil fuels and concerns about petroleum supplies have spurred the search for renewable transportation biofuels. To be a viable alternative, a biofuel should provide a net energy gain, have environmental benefits, be economically competitive, and be producible in large quantities without reducing food supplies. We use these criteria to evaluate, through life-cycle accounting, ethanol from corn grain and biodiesel from soybeans. Ethanol yields 25% more energy than the energy invested in its production, whereas biodiesel yields 93% more. Compared with ethanol, biodiesel releases just 1.0%, 8.3%, and 13% of the agricultural nitrogen, phosphorus, and pesticide pollutants, respectively, per net energy gain. Relative to the fossil fuels they displace, greenhouse gas emissions are reduced 12% by the production and combustion of ethanol and 41% by biodiesel. Biodiesel also releases less air pollutants per net energy gain than ethanol. These advantages of biodiesel over ethanol come from lower agricultural inputs and more efficient conversion of feedstocks to fuel. Neither biofuel can replace much petroleum without impacting food supplies. Even dedicating all U.S. corn and soybean production to biofuels would meet only 12% of gasoline demand and 6% of diesel demand. Until recent increases in petroleum prices, high production costs made biofuels unprofitable without subsidies. Biodiesel provides sufficient environmental advantages to merit subsidy. Transportation biofuels such as synfuel hydrocarbons or cellulosic ethanol, if produced from low-input biomass grown on agriculturally marginal land or from waste biomass, could provide much greater supplies and environmental benefits than food-based biofuels. corn | soybean | life-cycle accounting | agriculture | fossil fuel

Study on Green Supply Chain Management Based on Circular Economy

NASA Astrophysics Data System (ADS)

Ying, Jiang; Li-jun, Zhou

The article starts with circular economy and the connotation of green supply chain, then analyzes the difference between green supply chain and traditional supply chain and elaborates the content of green supply chain management. On that basis, the approach to implement green supply chain management in china shall be put forward.

Effects of enterprise technology on supply chain collaboration: analysis of China-linked supply chain

NASA Astrophysics Data System (ADS)

Li, Ling

2012-02-01

Supply chain collaboration has received increasing attention from scholars and practitioners in recent years. However, our understanding of how enterprise information technology facilitates supply chain collaboration is still very limited, especially with regard to Chinese enterprise ownerships such as state-owned firms, joint-venture firms and local village-owned firms. This paper extends the theory established in enterprise information technology (IT) and supply chain collaboration literature and relates it with coordination in China-linked supply chain. Drawing upon an empirical study from 177 Chinese companies, we provide three major findings: (i) uncovered the importance of leveraging enterprise IT through supply chain collaboration; (ii) identified the relationship between enterprise ownership and enterprise technology use and supply chain collaboration in China-linked supply chain and (iii) illustrated effects of supply chain collaborative activities on operational and market performance.

Biological caproate production by Clostridium kluyveri from ethanol and acetate as carbon sources.

PubMed

Yin, Yanan; Zhang, Yifeng; Karakashev, Dimitar Borisov; Wang, Jianlong; Angelidaki, Irini

2017-10-01

Caproate is a valuable industrial product and chemical precursor. In this study, batch tests were conducted to investigate the fermentative caproate production through chain elongation from acetate and ethanol. The effect of acetate/ethanol ratio and initial ethanol concentration on caproate production was examined. When substrate concentration was controlled at 100mM total carbon, hydrogen was used as an additional electron donor. The highest caproate concentration of 3.11g/L was obtained at an ethanol/acetate ratio of 7:3. No additional electron donor was needed upon an ethanol/acetate ratio ≥7:3. Caproate production increased with the increase of carbon source until ethanol concentration over 700mM, which inhibited the fermentation process. The highest caproate concentration of 8.42g/L was achieved from high ethanol strength wastewater with an ethanol/acetate ratio of 10:1 (550mM total carbon). Results obtained in this study can pave the way towards efficient chain elongation from ethanol-rich wastewater. Copyright © 2017 Elsevier Ltd. All rights reserved.

Room temperature ordering of dipalmitoyl phosphatidylserine bilayers induced by short chain alcohols.

PubMed

Wachtel, E; Bach, D; Miller, I R

2013-01-01

Using differential scanning calorimetry and small and wide angle X-ray diffraction, we show that, following extended incubation at room temperature, methanol, propanol, and three of the isomers of butanol can induce ordering in dipalmitoyl phosphatidylserine (DPPS) gel phase bilayers. The organization of the bilayers in the presence of ethanol, described previously, is now observed to be a general effect of short chain alcohols. Evidence is presented for tilting of the acyl chains with respect to the bilayer normal in the presence of ethanol or propanol. However, the different chain lengths of the alcohols, and isomeric form, influence the thermal stability of the ordered gel to different extents. This behavior is unlike that of the gel state phosphatidylcholine analog which, in the presence of short chain alcohols, undergoes hydrocarbon chain interdigitation. Dipalmitoyl phosphatidylcholine added to DPPS in the presence of 20 vol% ethanol, acts to suppress the ordered gel phase. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Techno-Economic Analysis of Biofuel Production from Macroalgae (Seaweed)

PubMed Central

Soleymani, Mohsen

2017-01-01

A techno-economic evaluation of bioenergy production from macroalgae was carried out in this study. Six different scenarios were examined for the production of different energy products and by-products. Seaweed was produced either via the longline method or the grid method. Final products of these scenarios were either ethanol from fermentation, or electricity from anaerobic digestion (AD). By-products were digestate for AD, and animal feed, or electricity and digestate, for the fermentation pathway. Bioenergy breakeven selling prices were investigated according to the cost components and the feedstock supply chain, while suggestions for potential optimization of costs were provided. The lowest production level of dry seaweed to meet 0.93 ($/L) for ethanol fuel and 0.07 $/kW-h for electricity was found to be 0.68 and 3.7 million tonnes (dry basis), respectively. At the moment, biofuel production from seaweed has been determined not to be economically feasible, but achieving economic production may be possible by lowering production costs and increasing the area under cultivation. PMID:29186857

Supply chain dynamics in healthcare services.

PubMed

Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

2010-01-01

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

Anaerobic Biodegradation of Biofuels (Ethanol and Biodiesel) and Proposed Biofuels (n-Propanol, iso-Propanol, n-Butanol)

EPA Science Inventory

Biofuels, such as ethanol and biodiesel, are a growing component of the nation’s fuel supply. Ethanol is the primary biofuel in the US market, distributed as a blend with petroleum gasoline, in concentrations ranging from 10% ethanol (E10) to 85% ethanol (E85). Biodiesel, made fr...

Identifying Innovative Interventions to Promote Healthy Eating Using Consumption-Oriented Food Supply Chain Analysis.

PubMed

Hawkes, Corinna

2009-07-01

The mapping and analysis of supply chains is a technique increasingly used to address problems in the food system. Yet such supply chain management has not yet been applied as a means of encouraging healthier diets. Moreover, most policies recommended to promote healthy eating focus on the consumer end of the chain. This article proposes a consumption-oriented food supply chain analysis to identify the changes needed in the food supply chain to create a healthier food environment, measured in terms of food availability, prices, and marketing. Along with established forms of supply chain analysis, the method is informed by a historical overview of how food supply chains have changed over time. The method posits that the actors and actions in the chain are affected by organizational, financial, technological, and policy incentives and disincentives, which can in turn be levered for change. It presents a preliminary example of the supply of Coca-Cola beverages into school vending machines and identifies further potential applications. These include fruit and vegetable supply chains, local food chains, supply chains for health-promoting versions of food products, and identifying financial incentives in supply chains for healthier eating.

Identifying Innovative Interventions to Promote Healthy Eating Using Consumption-Oriented Food Supply Chain Analysis

PubMed Central

Hawkes, Corinna

2009-01-01

The mapping and analysis of supply chains is a technique increasingly used to address problems in the food system. Yet such supply chain management has not yet been applied as a means of encouraging healthier diets. Moreover, most policies recommended to promote healthy eating focus on the consumer end of the chain. This article proposes a consumption-oriented food supply chain analysis to identify the changes needed in the food supply chain to create a healthier food environment, measured in terms of food availability, prices, and marketing. Along with established forms of supply chain analysis, the method is informed by a historical overview of how food supply chains have changed over time. The method posits that the actors and actions in the chain are affected by organizational, financial, technological, and policy incentives and disincentives, which can in turn be levered for change. It presents a preliminary example of the supply of Coca-Cola beverages into school vending machines and identifies further potential applications. These include fruit and vegetable supply chains, local food chains, supply chains for health-promoting versions of food products, and identifying financial incentives in supply chains for healthier eating. PMID:23144674

Vacuolar H+-ATPase Protects Saccharomyces cerevisiae Cells against Ethanol-Induced Oxidative and Cell Wall Stresses

PubMed Central

Charoenbhakdi, Sirikarn; Dokpikul, Thanittra; Burphan, Thanawat; Techo, Todsapol

2016-01-01

ABSTRACT During fermentation, increased ethanol concentration is a major stress for yeast cells. Vacuolar H+-ATPase (V-ATPase), which plays an important role in the maintenance of intracellular pH homeostasis through vacuolar acidification, has been shown to be required for tolerance to straight-chain alcohols, including ethanol. Since ethanol is known to increase membrane permeability to protons, which then promotes intracellular acidification, it is possible that the V-ATPase is required for recovery from alcohol-induced intracellular acidification. In this study, we show that the effects of straight-chain alcohols on membrane permeabilization and acidification of the cytosol and vacuole are strongly dependent on their lipophilicity. These findings suggest that the membrane-permeabilizing effect of straight-chain alcohols induces cytosolic and vacuolar acidification in a lipophilicity-dependent manner. Surprisingly, after ethanol challenge, the cytosolic pH in Δvma2 and Δvma3 mutants lacking V-ATPase activity was similar to that of the wild-type strain. It is therefore unlikely that the ethanol-sensitive phenotype of vma mutants resulted from severe cytosolic acidification. Interestingly, the vma mutants exposed to ethanol exhibited a delay in cell wall remodeling and a significant increase in intracellular reactive oxygen species (ROS). These findings suggest a role for V-ATPase in the regulation of the cell wall stress response and the prevention of endogenous oxidative stress in response to ethanol. IMPORTANCE The yeast Saccharomyces cerevisiae has been widely used in the alcoholic fermentation industry. Among the environmental stresses that yeast cells encounter during the process of alcoholic fermentation, ethanol is a major stress factor that inhibits yeast growth and viability, eventually leading to fermentation arrest. This study provides evidence for the molecular mechanisms of ethanol tolerance, which is a desirable characteristic for yeast strains used in alcoholic fermentation. The results revealed that straight-chain alcohols induced cytosolic and vacuolar acidification through their membrane-permeabilizing effects. Contrary to expectations, a role for V-ATPase in the regulation of the cell wall stress response and the prevention of endogenous oxidative stress, but not in the maintenance of intracellular pH, seems to be important for protecting yeast cells against ethanol stress. These findings will expand our understanding of the mechanisms of ethanol tolerance and provide promising clues for the development of ethanol-tolerant yeast strains. PMID:26994074

Vacuolar H+-ATPase Protects Saccharomyces cerevisiae Cells against Ethanol-Induced Oxidative and Cell Wall Stresses.

PubMed

Charoenbhakdi, Sirikarn; Dokpikul, Thanittra; Burphan, Thanawat; Techo, Todsapol; Auesukaree, Choowong

2016-05-15

During fermentation, increased ethanol concentration is a major stress for yeast cells. Vacuolar H(+)-ATPase (V-ATPase), which plays an important role in the maintenance of intracellular pH homeostasis through vacuolar acidification, has been shown to be required for tolerance to straight-chain alcohols, including ethanol. Since ethanol is known to increase membrane permeability to protons, which then promotes intracellular acidification, it is possible that the V-ATPase is required for recovery from alcohol-induced intracellular acidification. In this study, we show that the effects of straight-chain alcohols on membrane permeabilization and acidification of the cytosol and vacuole are strongly dependent on their lipophilicity. These findings suggest that the membrane-permeabilizing effect of straight-chain alcohols induces cytosolic and vacuolar acidification in a lipophilicity-dependent manner. Surprisingly, after ethanol challenge, the cytosolic pH in Δvma2 and Δvma3 mutants lacking V-ATPase activity was similar to that of the wild-type strain. It is therefore unlikely that the ethanol-sensitive phenotype of vma mutants resulted from severe cytosolic acidification. Interestingly, the vma mutants exposed to ethanol exhibited a delay in cell wall remodeling and a significant increase in intracellular reactive oxygen species (ROS). These findings suggest a role for V-ATPase in the regulation of the cell wall stress response and the prevention of endogenous oxidative stress in response to ethanol. The yeast Saccharomyces cerevisiae has been widely used in the alcoholic fermentation industry. Among the environmental stresses that yeast cells encounter during the process of alcoholic fermentation, ethanol is a major stress factor that inhibits yeast growth and viability, eventually leading to fermentation arrest. This study provides evidence for the molecular mechanisms of ethanol tolerance, which is a desirable characteristic for yeast strains used in alcoholic fermentation. The results revealed that straight-chain alcohols induced cytosolic and vacuolar acidification through their membrane-permeabilizing effects. Contrary to expectations, a role for V-ATPase in the regulation of the cell wall stress response and the prevention of endogenous oxidative stress, but not in the maintenance of intracellular pH, seems to be important for protecting yeast cells against ethanol stress. These findings will expand our understanding of the mechanisms of ethanol tolerance and provide promising clues for the development of ethanol-tolerant yeast strains. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Information flow in the pharmaceutical supply chain.

PubMed

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.

Alcoholytic Cleavage of Polyhydroxyalkanoate Chains by Class IV Synthases Induced by Endogenous and Exogenous Ethanol

PubMed Central

Hyakutake, Manami; Tomizawa, Satoshi; Mizuno, Kouhei; Abe, Hideki

2014-01-01

Polyhydroxyalkanoate (PHA)-producing Bacillus strains express class IV PHA synthase, which is composed of the subunits PhaR and PhaC. Recombinant Escherichia coli expressing PHA synthase from Bacillus cereus strain YB-4 (PhaRCYB-4) showed an unusual reduction of the molecular weight of PHA produced during the stationary phase of growth. Nuclear magnetic resonance analysis of the low-molecular-weight PHA revealed that its carboxy end structure was capped by ethanol, suggesting that the molecular weight reduction was the result of alcoholytic cleavage of PHA chains by PhaRCYB-4 induced by endogenous ethanol. This scission reaction was also induced by exogenous ethanol in both in vivo and in vitro assays. In addition, PhaRCYB-4 was observed to have alcoholysis activity for PHA chains synthesized by other synthases. The PHA synthase from Bacillus megaterium (PhaRCBm) from another subgroup of class IV synthases was also assayed and was shown to have weak alcoholysis activity for PHA chains. These results suggest that class IV synthases may commonly share alcoholysis activity as an inherent feature. PMID:24334666

Ethanol production, corn gluten feed, and EC trade. Agriculture information bulletin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, M.

1993-07-01

The profitability of ethanol depends not only on sales of ethanol, but on sales of several coproducts of corn wet-milling such as corn gluten feed (CGF). CGF demand and supply are affected by several European Community (EC) and US policies, such as EC grain price supports and US energy policies. Changes in existing policies and programs could have a significant effect on the CGF market and, consequently, on the profitability of ethanol production. The report examines the implications of several policy options on demand, supply, and price of CGF and on the profitability of ethanol production. The policy changes examinedmore » include: (1) the effect of proposed changes in EC farm and trade policies, and (2) the effect of increased ethanol production due to proposed US environmental policies, such as the reauthorization of the Clean Air Act.« less

Anaerobic Biodegradation of Biofuels (Ethanol and Biodiesel) and Proposed Biofuels (n-Propanol, iso-Propanol, n-Butanol, and 2,5-Dimethylfuran) in Aquifer Sediments

EPA Science Inventory

Biofuels, such as ethanol and biodiesel, are a growing component of the nation’s fuel supply. Ethanol is the primary biofuel in the US market, distributed as a blend with petroleum gasoline, in concentrations ranging from 10% ethanol (E10) to 85% ethanol (E85). Biodiesel, made fr...

Anaerobic Biodegradation of Biofuels (Ethanol and Biodiesel) and Proposed Biofuels (n-Propanol, iso-Propanol, n-Butanol, and 2,5-Dimethylfuran) in Aquifer Sediments

EPA Science Inventory

Biofuels, such as ethanol and biodiesel, are a growing component of the nation's fuel supply. Ethanol is the primary biofuel in the US martket, distributed as a blend with petroleum gasoline in concentrations ranging from 10% ethanol (E10) to 85% ethanol (E85). Biodiesel, made ...

Using Civilian Supply Chain Management Best Practices to Improve Army Supply Chain Management Procedures

DTIC Science & Technology

2017-06-09

USING CIVILIAN SUPPLY CHAIN MANAGEMENT BEST PRACTICES TO IMPROVE ARMY SUPPLY CHAIN MANAGEMENT PROCEDURES A thesis presented to......Army Supply Chain Management Procedures 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Chief Warrant

The triple-A supply chain.

PubMed

Lee, Hau L

2004-10-01

Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.

Supply-Chain Optimization Template

NASA Technical Reports Server (NTRS)

Quiett, William F.; Sealing, Scott L.

2009-01-01

The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

Measuring the influence of industry sector membership on supply chain disruption reporting.

PubMed

Alcantara, Patrick

2015-01-01

The global Supply Chain Resilience Survey by the Business Continuity Institute and Zurich Insurance is a comprehensive study on the state of supply chains in different organisations worldwide. As a benchmarking tool, it also contains data about business continuity arrangements in place to ensure supply chain resilience. Given this study's historically qualitative approach to reporting, this paper aims to introduce quantitative analysis. In this paper, responses that report membership in Standard Industrial Classification 2007 industry sectors from the 2013 Supply Chain Resilience Survey were disaggregated and related to supply chain disruption reporting. A chi-square test of independence reveals that membership in a particular industry sector influences reporting of supply chain disruption. Nonetheless, the relationship between these variables is weak. This study demonstrates interesting differences between industry sectors in terms of supply chain resilience. Further research is required in terms of other variables in order to provide granularity and relevant findings to supply chain planners.

Information flow in the pharmaceutical supply chain

PubMed Central

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead. PMID:26664401

A mixed integer linear programming model for operational planning of a biodiesel supply chain network from used cooking oil

NASA Astrophysics Data System (ADS)

Jonrinaldi, Hadiguna, Rika Ampuh; Salastino, Rades

2017-11-01

Environmental consciousness has paid many attention nowadays. It is not only about how to recycle, remanufacture or reuse used end products but it is also how to optimize the operations of the reverse system. A previous research has proposed a design of reverse supply chain of biodiesel network from used cooking oil. However, the research focused on the design of the supply chain strategy not the operations of the supply chain. It only decided how to design the structure of the supply chain in the next few years, and the process of each stage will be conducted in the supply chain system in general. The supply chain system has not considered operational policies to be conducted by the companies in the supply chain. Companies need a policy for each stage of the supply chain operations to be conducted so as to produce the optimal supply chain system, including how to use all the resources that have been designed in order to achieve the objectives of the supply chain system. Therefore, this paper proposes a model to optimize the operational planning of a biodiesel supply chain network from used cooking oil. A mixed integer linear programming is developed to model the operational planning of biodiesel supply chain in order to minimize the total operational cost of the supply chain. Based on the implementation of the model developed, the total operational cost of the biodiesel supply chain incurred by the system is less than the total operational cost of supply chain based on the previous research during seven days of operational planning about amount of 2,743,470.00 or 0.186%. Production costs contributed to 74.6 % of total operational cost and the cost of purchasing the used cooking oil contributed to 24.1 % of total operational cost. So, the system should pay more attention to these two aspects as changes in the value of these aspects will cause significant effects to the change in the total operational cost of the supply chain.

THE ENVIRONMENTAL CONSEQUENCES OF A RELEASE OF ETHANOL AT A UST SITE

EPA Science Inventory

Ethanol from gasoline (E10 and E85) is expected to produce ethanol concentrations in ground water in the range of 4,000 to 15,000 mg/L. In this range of concentrations, ethanol can be expected to deplete the supply of soluble electrons acceptors such as oxygen, nitrate and sulfa...

N 2 gas is an effective fertilizer for bioethanol production by Zymomonas mobilis

DOE PAGES

Kremer, Timothy A.; LaSarre, Breah; Posto, Amanda L.; ...

2015-02-02

A nascent cellulosic ethanol industry is struggling to become cost-competitive against corn ethanol and gasoline. Millions of dollars are spent on nitrogen supplements to make up for the low nitrogen content of the cellulosic feedstock. In this paper, we show for the first time to our knowledge that the ethanol-producing bacterium, Zymomonas mobilis, can use N 2 gas in lieu of traditional nitrogen supplements. Despite being an electron-intensive process, N 2 fixation by Z. mobilis did not divert electrons away from ethanol production, as the ethanol yield was greater than 97% of the theoretical maximum. In a defined medium, Z.more » mobilis produced ethanol 50% faster per cell and generated half the unwanted biomass when supplied N 2 instead of ammonium. In a cellulosic feedstock-derived medium, Z. mobilis achieved a similar cell density and a slightly higher ethanol yield when supplied N 2 instead of the industrial nitrogen supplement, corn steep liquor. Finally, we estimate that N 2-utilizing Z. mobilis could save a cellulosic ethanol production facility more than $1 million/y.« less

N2 gas is an effective fertilizer for bioethanol production by Zymomonas mobilis

PubMed Central

Kremer, Timothy A.; LaSarre, Breah; Posto, Amanda L.; McKinlay, James B.

2015-01-01

A nascent cellulosic ethanol industry is struggling to become cost-competitive against corn ethanol and gasoline. Millions of dollars are spent on nitrogen supplements to make up for the low nitrogen content of the cellulosic feedstock. Here we show for the first time to our knowledge that the ethanol-producing bacterium, Zymomonas mobilis, can use N2 gas in lieu of traditional nitrogen supplements. Despite being an electron-intensive process, N2 fixation by Z. mobilis did not divert electrons away from ethanol production, as the ethanol yield was greater than 97% of the theoretical maximum. In a defined medium, Z. mobilis produced ethanol 50% faster per cell and generated half the unwanted biomass when supplied N2 instead of ammonium. In a cellulosic feedstock-derived medium, Z. mobilis achieved a similar cell density and a slightly higher ethanol yield when supplied N2 instead of the industrial nitrogen supplement, corn steep liquor. We estimate that N2-utilizing Z. mobilis could save a cellulosic ethanol production facility more than $1 million/y. PMID:25646422

48 CFR 252.239-7017 - Notice of supply chain risk.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Notice of supply chain... of Provisions And Clauses 252.239-7017 Notice of supply chain risk. As prescribed in 239.7306(a), use the following provision: Notice of Supply Chain Risk (NOV 2013) (a) Definition. Supply chain risk, as...

Health supply chain management.

PubMed

Zimmerman, Rolf; Gallagher, Pat

2010-01-01

This chapter gives an educational overview of: * The actual application of supply chain practice and disciplines required for service delivery improvement within the current health environment. * A rationale for the application of Supply Chain Management (SCM) approaches to the Health sector. * The tools and methods available for supply chain analysis and benchmarking. * Key supply chain success factors.

Teaching Supply Chain Management Complexities: A SCOR Model Based Classroom Simulation

ERIC Educational Resources Information Center

Webb, G. Scott; Thomas, Stephanie P.; Liao-Troth, Sara

2014-01-01

The SCOR (Supply Chain Operations Reference) Model Supply Chain Classroom Simulation is an in-class experiential learning activity that helps students develop a holistic understanding of the processes and challenges of supply chain management. The simulation has broader learning objectives than other supply chain related activities such as the…

Analysis of Agility Performance of Supply Chain: A Case Study on Indian Automotive Manufacturer

NASA Astrophysics Data System (ADS)

Routroy, S.; Sharma, S.; Bhardwaj, A.

2018-04-01

Manufacturing companies should understand the changing customer needs and expectations, access and defend the competitive pressure, anticipate and manage the uncertain demand and supply chain risk, and implement the appropriate technology to survive and excel in today’s marketplace. Therefore, they are moving away from mass production (i.e. lean supply chain) to one based on fast-responsiveness and flexibility, capitalizing on the rapid advancement in internet technologies and factory-on-demand mode of production (i.e. agile supply chain). It is observed that manufacturing companies in India in general and automotive supply chain in specific are compelled to cultivate supply chain agility for enhancing its performance level on continuous basis and comparing its supply chain agility performance with competitors to survive and sustain in the competitive business environment. Therefore, a methodology is proposed to evaluate the supply chain agility of a manufacturing supply chain and compare its performance level with competitors using Fuzzy Analytic Hierarchy Process and Taguchi Loss Function. A case study is developed and the proposed methodology is applied to Indian automotive supply chain for explaining the salient features of it.

Comprehensive Study on Wastages of Supply Chain Information Sharing in Automotive Industries

NASA Astrophysics Data System (ADS)

Sendhil Kumar, R.; Pugazhendhi, S.; Muralidharan, C.; Murali, S.

2017-03-01

A supply chain is a very extensive concept, which encompasses many problems and features when it comes to controlling. Now a day’s lean concept is a very common method to several areas, such as service sectors and manufacturing. Applying the lean concept to supply chain management is a very popular study part, it has attracted many industrial practices and researchers with different applications. Information sharing and technology remain one of the key factors of integrating the supply chain members. Current scenario the competition is no longer between the competing companies, but it happens between the supply chains. So the efficiency of the supply chain is very important. And the effective sharing of information can enhance the supply chain efficiency through minimizing the inventories and Information sharing can increase supply chain efficiency by reducing inventories and stabilizing the production. This paper describes and discusses about the seven deadly wastes of supply chain information with the comparative principle of Toyota production system (TPS) principle approach. How the TPS can be applied to supply chain information sharing And lean tool of 5S concept possibility improve the information sharing.

A triple-bridged azido-Cu(II) chain compound fine-tuned by mixed carboxylate/ethanol linkers displays slow-relaxation and ferromagnetic order: synthesis, crystal structure, magnetic properties and DFT calculations.

PubMed

Liu, Xiangyu; Chen, Sanping; Grancha, Thais; Pardo, Emilio; Ke, Hongshan; Yin, Bing; Wei, Qing; Xie, Gang; Gao, Shengli

2014-11-07

A new azido-Cu(II) compound, [Cu(4-fba)(N3)(C2H5OH)] (4-fba = 4-fluorobenzoic acid) (1), has been synthesized and characterized. The X-ray crystal structure analysis demonstrates that only one crystallographically independent Cu(II) ion in the asymmetric unit of 1 exhibits a stretched octahedral geometry in which two azido N atoms and two carboxylic O atoms locate in the equatorial square, while two ethanol O atoms occupy the apical positions, forming a 1D Cu(II) chain with an alternating triple-bridge of EO-azido, syn,syn-carboxylate, and μ2-ethanol. The title compound consists of ferromagnetically interacting ferromagnetic chains, which exhibit ferromagnetic order (T(c) = 7.0 K). The strong ferromagnetic coupling between adjacent Cu(II) ions within each chain is due to the countercomplementarity of the super-exchange pathways, whereas the ferromagnetic interchain interactions--responsible for the long-range magnetic ordering--are most likely due to the presence of coordinated ethanol molecules establishing hydrogen bonds with neighboring chains. DFT calculations have been performed on compound 1 to offer a qualitative theoretical explanation of the magnetic behavior.

Prospects for Anaerobic Biodegradation of Biofuels (Ethanol and Biodiesel) and Proposed Biofuels (n-Propanol, iso-Propanol, n-Butanol, and 2,5-Dimethylfuran) in Aquifer Sediments

EPA Science Inventory

Biofuels, such as ethanol and biodiesel, are a growing component of the nation’s fuel supply. Ethanol is the primary biofuel in the US market, distributed as a blend with petroleum gasoline, in concentrations ranging from 10% ethanol (E10) to 85% ethanol (E85). Biodiesel, made ...

Multidimensional competences of supply chain managers: an empirical study

NASA Astrophysics Data System (ADS)

Shou, Yongyi; Wang, Weijiao

2017-01-01

Supply chain manager competences have attracted increasing attention from both practitioners and scholars in recent years. This paper conducted an explorative study to understand the dimensionality of supply chain manager competences. Online job advertisements for supply chain managers were collected as secondary data, since these advertisements reflect employers' real job requirements. We adopted the multidimensional scaling (MDS) technique to process and analyse the data. Five dimensions of supply chain manager competences are identified: generic skills, functional skills, supply chain management (SCM) qualifications and leadership, SCM expertise, and industry-specific and senior management skills. Statistic tests indicate that supply chain manager competence saliences vary in different industries and regions.

Planning the bioterrorism response supply chain: learn and live.

PubMed

Brandeau, Margaret L; Hutton, David W; Owens, Douglas K; Bravata, Dena M

2007-01-01

Responses to bioterrorism require rapid procurement and distribution of medical and pharmaceutical supplies, trained personnel, and information. Thus, they present significant logistical challenges. On the basis of a review of the manufacturing and service supply chain literature, the authors identified five supply chain strategies that can potentially increase the speed of response to a bioterrorism attack, reduce inventories, and save money: effective supply chain network design; effective inventory management; postponement of product customization and modularization of component parts; coordination of supply chain stakeholders and appropriate use of incentives; and effective information management. The authors describe how concepts learned from published evaluations of manufacturing and service supply chains, as well as lessons learned from responses to natural disasters, naturally occurring outbreaks, and the 2001 US anthrax attacks, can be applied to design, evaluate, and improve the bioterrorism response supply chain. Such lessons could also be applied to the response supply chains for disease outbreaks and natural and manmade disasters.

Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

ERIC Educational Resources Information Center

Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

2014-01-01

Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

Traceability and Risk Analysis Strategies for Addressing Counterfeit Electronics in Supply Chains for Complex Systems.

PubMed

DiMase, Daniel; Collier, Zachary A; Carlson, Jinae; Gray, Robin B; Linkov, Igor

2016-10-01

Within the microelectronics industry, there is a growing concern regarding the introduction of counterfeit electronic parts into the supply chain. Even though this problem is widespread, there have been limited attempts to implement risk-based approaches for testing and supply chain management. Supply chain risk management tends to focus on the highly visible disruptions of the supply chain instead of the covert entrance of counterfeits; thus counterfeit risk is difficult to mitigate. This article provides an overview of the complexities of the electronics supply chain, and highlights some gaps in risk assessment practices. In particular, this article calls for enhanced traceability capabilities to track and trace parts at risk through various stages of the supply chain. Placing the focus on risk-informed decision making through the following strategies is needed, including prioritization of high-risk parts, moving beyond certificates of conformance, incentivizing best supply chain management practices, adoption of industry standards, and design and management for supply chain resilience. © 2016 Society for Risk Analysis.

Design of a biomass-to-biorefinery logistics system through bio-inspired metaheuristic optimization considering multiple types of feedstocks

NASA Astrophysics Data System (ADS)

Trueba, Isidoro

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers significant potential to mitigate climate change by reducing life-cycle greenhouse gas emissions relative to fossil fuels. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supplying future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over the coming decades. For instance, many logistical challenges will be faced in order to provide an efficient and reliable supply of quality feedstock to biorefineries. 700 million tons of biomass will be required to be sustainably delivered to biorefineries annually to meet the projected use of biofuels by the year of 2022. This thesis is motivated by the urgent need of advancing knowledge and understanding of the highly complex biofuel supply chain. While corn ethanol production has increased fast enough to keep up with the energy mandates, production of biofuels from different types of feedstocks has also been incremented. A number of pilot and demonstration scale advanced biofuel facilities have been set up, but commercial scale facilities are yet to become operational. Scaling up this new biofuel sector poses significant economic and logistical challenges for regional planners and biofuel entrepreneurs in terms of feedstock supply assurance, supply chain development, biorefinery establishment, and setting up transport, storage and distribution infrastructure. The literature also shows that the larger cost in the production of biomass to ethanol originates from the logistics operation therefore it is essential that an optimal logistics system is designed in order to keep low the costs of producing ethanol and make possible the shift from fossil fuels to biofuels. In many ways biomass is a unique renewable resource. It can be stored and transported relatively easily in contrast to renewable options such as wind and solar, which create intermittent electrical power that requires immediate consumption and a connection to the grid. This thesis presents two different models for the design optimization of a biomass-to-biorefinery logistics system through bio-inspired metaheuristic optimization considering multiple types of feedstocks. This work compares the performance and solutions obtained by two types of metaheuristic approaches; genetic algorithm and ant colony optimization. Compared to rigorous mathematical optimization methods or iterative algorithms, metaheuristics do not guarantee that a global optimal solution can be found on some class of problems. Problems with similar characteristics to the one presented in this thesis have been previously solved using linear programming, integer programming and mixed integer programming methods. However, depending on the type of problem, these mathematical or complete methods might need exponential computation time in the worst-case. This often leads to computation times too high for practical purposes. Therefore, this thesis develops two types of metaheuristic approaches for the design optimization of a biomass-to-biorefinery logistics system considering multiple types of feedstocks and shows that metaheuristics are highly suitable to solve hard combinatorial optimization problems such as the one addressed in this research work.

Anaerobic biodegradation of biofuels and BTEX compounds in aquifer sediment, with implications for modeling transport and fate (Philadelphia)

EPA Science Inventory

Biofuels, such as ethanol and biodiesel, are a growing component of the nation’s fuel supply. Ethanol is the primary biofuel in the US market, distributed as a blend with petroleum gasoline, in concentrations ranging from 10% ethanol (E10) to 85% ethanol (E85). Biodiesel, made ...

Mycotoxin Contamination in the EU Feed Supply Chain: A Focus on Cereal Byproducts.

PubMed

Pinotti, Luciano; Ottoboni, Matteo; Giromini, Carlotta; Dell'Orto, Vittorio; Cheli, Federica

2016-02-15

Mycotoxins represent a risk to the feed supply chain with an impact on economies and international trade. A high percentage of feed samples have been reported to be contaminated with more than one mycotoxin. In most cases, the concentrations were low enough to ensure compliance with the European Union (EU) guidance values or maximum admitted levels. However, mycotoxin co-contamination might still exert adverse effects on animals due to additive/synergistic interactions. Studies on the fate of mycotoxins during cereal processing, such as milling, production of ethanol fuels, and beer brewing, have shown that mycotoxins are concentrated into fractions that are commonly used as animal feed. Published data show a high variability in mycotoxin repartitioning, mainly due to the type of mycotoxins, the level and extent of fungal contamination, and a failure to understand the complexity of food processing technologies. Precise knowledge of mycotoxin repartitioning during technological processes is critical and may provide a sound technical basis for feed managers to conform to legislation requirements and reduce the risk of severe adverse market and trade repercussions. Regular, economical and straightforward feed testing is critical to reach a quick and accurate diagnosis of feed quality. The use of rapid methods represents a future challenge.

Biomass Scenario Model Documentation: Data and References

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Y.; Newes, E.; Bush, B.

2013-05-01

The Biomass Scenario Model (BSM) is a system dynamics model that represents the entire biomass-to-biofuels supply chain, from feedstock to fuel use. The BSM is a complex model that has been used for extensive analyses; the model and its results can be better understood if input data used for initialization and calibration are well-characterized. It has been carefully validated and calibrated against the available data, with data gaps filled in using expert opinion and internally consistent assumed values. Most of the main data sources that feed into the model are recognized as baseline values by the industry. This report documentsmore » data sources and references in Version 2 of the BSM (BSM2), which only contains the ethanol pathway, although subsequent versions of the BSM contain multiple conversion pathways. The BSM2 contains over 12,000 total input values, with 506 distinct variables. Many of the variables are opportunities for the user to define scenarios, while others are simply used to initialize a stock, such as the initial number of biorefineries. However, around 35% of the distinct variables are defined by external sources, such as models or reports. The focus of this report is to provide insight into which sources are most influential in each area of the supply chain.« less

Mycotoxin Contamination in the EU Feed Supply Chain: A Focus on Cereal Byproducts

PubMed Central

Pinotti, Luciano; Ottoboni, Matteo; Giromini, Carlotta; Dell’Orto, Vittorio; Cheli, Federica

2016-01-01

Mycotoxins represent a risk to the feed supply chain with an impact on economies and international trade. A high percentage of feed samples have been reported to be contaminated with more than one mycotoxin. In most cases, the concentrations were low enough to ensure compliance with the European Union (EU) guidance values or maximum admitted levels. However, mycotoxin co-contamination might still exert adverse effects on animals due to additive/synergistic interactions. Studies on the fate of mycotoxins during cereal processing, such as milling, production of ethanol fuels, and beer brewing, have shown that mycotoxins are concentrated into fractions that are commonly used as animal feed. Published data show a high variability in mycotoxin repartitioning, mainly due to the type of mycotoxins, the level and extent of fungal contamination, and a failure to understand the complexity of food processing technologies. Precise knowledge of mycotoxin repartitioning during technological processes is critical and may provide a sound technical basis for feed managers to conform to legislation requirements and reduce the risk of severe adverse market and trade repercussions. Regular, economical and straightforward feed testing is critical to reach a quick and accurate diagnosis of feed quality. The use of rapid methods represents a future challenge. PMID:26891326

Renewable Fuels Legislation Impact Analysis

EIA Publications

2005-01-01

An analysis based on an extension of the ethanol supply curve in our model to allow for enough ethanol production to meet the requirements of S. 650. This analysis provides an update of the May 23, 2005 analysis, with revised ethanol production and cost assumptions.

Dynamic Impact of Online Word-of-Mouth and Advertising on Supply Chain Performance.

PubMed

Feng, Jian; Liu, Bin

2018-01-04

Cooperative (co-op) advertising investments benefit brand goodwill and further improve supply chain performance. Meanwhile, online word-of-mouth (OWOM) can also play an important role in supply chain performance. On the basis of co-op advertising, this paper considers a single supply chain structure led by a manufacturer and examines a fundamental issue concerning the impact of OWOM on supply chain performance. Firstly, by the method of differential game, this paper analyzes the dynamic impact of OWOM and advertising on supply chain performance (i.e., brand goodwill, sales, and profits) under three different supply chain decisions (i.e., only advertising, and manufacturers with and without sharing cost of OWOM with retailers). We compare and analyze the optimal strategies of advertising and OWOM under the above different supply chain decisions. Secondly, the system dynamics model is established to reflect the dynamic impact of OWOM and advertising on supply chain performance. Finally, three supply chain decisions under two scenarios, strong brand and weak brand, are analyzed through the system dynamics simulation. The results show that the input of OWOM can enhance brand goodwill and improve earnings. It further promotes the OWOM reputation and improves the supply chain performance if manufacturers share the cost of OWOM with retailers. Then, in order to eliminate the retailers from word-of-mouth fraud and establish a fair competition mechanism, the third parties (i.e., regulators or e-commerce platforms) should take appropriate punitive measures against retailers. Furthermore, the effect of OWOM on supply chain performance under a strong brand differed from those under a weak brand. Last but not least, if OWOM is improved, there would be more remarkable performance for the weak brand than that for the strong brand in the supply chain.

Dynamic Impact of Online Word-of-Mouth and Advertising on Supply Chain Performance

PubMed Central

Feng, Jian

2018-01-01

Cooperative (co-op) advertising investments benefit brand goodwill and further improve supply chain performance. Meanwhile, online word-of-mouth (OWOM) can also play an important role in supply chain performance. On the basis of co-op advertising, this paper considers a single supply chain structure led by a manufacturer and examines a fundamental issue concerning the impact of OWOM on supply chain performance. Firstly, by the method of differential game, this paper analyzes the dynamic impact of OWOM and advertising on supply chain performance (i.e., brand goodwill, sales, and profits) under three different supply chain decisions (i.e., only advertising, and manufacturers with and without sharing cost of OWOM with retailers). We compare and analyze the optimal strategies of advertising and OWOM under the above different supply chain decisions. Secondly, the system dynamics model is established to reflect the dynamic impact of OWOM and advertising on supply chain performance. Finally, three supply chain decisions under two scenarios, strong brand and weak brand, are analyzed through the system dynamics simulation. The results show that the input of OWOM can enhance brand goodwill and improve earnings. It further promotes the OWOM reputation and improves the supply chain performance if manufacturers share the cost of OWOM with retailers. Then, in order to eliminate the retailers from word-of-mouth fraud and establish a fair competition mechanism, the third parties (i.e., regulators or e-commerce platforms) should take appropriate punitive measures against retailers. Furthermore, the effect of OWOM on supply chain performance under a strong brand differed from those under a weak brand. Last but not least, if OWOM is improved, there would be more remarkable performance for the weak brand than that for the strong brand in the supply chain. PMID:29300361

Using SCOR as a Supply Chain Management Framework for Government Agency Contract Requirements

NASA Technical Reports Server (NTRS)

Paxton, Joseph; Tucker, Brian

2010-01-01

This paper will present a model that uses the Supply-Chain Operations Reference (SCOR) model as a foundation for a framework to illustrate the information needed throughout a product lifecycle to support a healthy supply chain management function and the subsequent contract requirements to enable it. It will also show where in the supply chain the information must be extracted. The ongoing case study used to exemplify the model is NASA's (National Aeronautics and Space Administration) Ares I program for human spaceflight. Effective supply chain management and contract requirements are ongoing opportunities for continuous improvement within government agencies, specifically development of systems for human spaceflight operations. Multiple reports from the Government Accountability Office (GAO) reinforce this importance. The SCOR model is a framework for describing a supply chain with process building blocks and business activities. It provides a set of metrics for measuring supply chain performance and best practices for continuously improving. This paper expands the application of the SCOR to also provide the framework for defining information needed from different levels of the supply chain and at different phases of the lifecycle. These needs can be incorporated into contracts to enable more effective supply chain management. Depending on the phase of the lifecycle, effective supply chain management will require involvement from different levels of the organization and different levels of the supply chain.

A prospective analysis of Brazilian biofuel economy: Land use, infrastructure development and fuel pricing policies

NASA Astrophysics Data System (ADS)

Nunez Amortegui, Hector Mauricio

Being the two largest ethanol producers in the world, transportation fuel policies in Brazil and the U.S. affect not only their domestic markets but also the global food and biofuel economy. Hence, the complex biofuel policy climate in these countries leaves the public with unclear conclusions about the prospects for supply and trade of agricultural commodities and biofuels. In this dissertation I develop a price endogenous mathematical programming model to simulate and analyze the impacts of biofuel policies in Brazil and the U.S. on land use in these countries, agricultural commodity and transportation fuel markets, trade, and global environment. The model maximizes the social surplus represented by the sum of producers' and consumers' surpluses, including selected agricultural commodity markets and fuel markets in the U.S., Brazil, Argentina, China, and the Rest-of-the-World (ROW), subject to resource limitations, material balances, technical constraints, and policy restrictions. Consumers' surplus is derived from consumption of agricultural commodities and transportation fuels by vehicles that generate vehicle-kilometers-traveled (VKT). While in the other regional components aggregate supply and demand functions are assumed for the commodities included in the analysis, the agricultural supply component is regionally disaggregated for Brazil and the U.S., and the transportation fuel sector is regionally disaggregated for Brazil. The U.S. agricultural supply component includes production of fourteen major food/feed crops, including soybeans, corn and wheat, and cellulosic biofuel feedstocks. The Brazil component includes eight major annual crops, including soybeans, corn, wheat, and rice, and sugarcane as the energy crop. A particular emphasis is given to the beef-cattle production in Brazil and the potential for livestock semi-intensification in Brazilian pasture grazing systems as a prospective pathway for releasing new croplands. In the fuel sector of both country components, ethanol and gasoline are assumed to be perfect substitutes and combined in accordance with the specified blending regulations to generate VKT. For gasoline, an upward sloping supply function is assumed for the U.S., while in the case of Brazil a perfectly elastic supply function is used reflecting the pricing policy implemented in recent years. Consumers' driving behavior and fuel choice are determined by the model in accordance with the composition of the vehicle fleets in both countries. The model also simulates the economic impacts of transportation infrastructure developments in Brazil, specifically the recently launched ethanol pipeline project which is expected to affect not only the price, production, consumption and trade of ethanol but also the land use changes in the country. All these factors are combined to assess the impacts on economic surplus and total direct Greenhouse Gas (GHG) emissions in the U.S. and Brazil. The model is calibrated for 2007 and markets conditions are projected to 2022 under different policy scenarios. Empirical results show that a free ethanol trade regime in the U.S. would reduce the domestic ethanol production, including both corn and cellulosic ethanol. The U.S. biofuel production would be consumed completely in the domestic market and part of the demand is met by imports. Brazil, on the other hand, would meet its domestic ethanol demand and export about half of its production to the U.S., China and the ROW to meet the biofuel mandates in those countries. With regards to the land use, the model results show that intensifying the current livestock systems in Brazil would release a significant amount of land for corn and soybean production, and sugarcane acreage would expand in the denominated "region of expansion". The livestock semi-intensification in Brazil, driven by the high world ethanol demand and considered as the only alternative to expand sugarcane area in this study, would reduce the aggregate GHG emissions. The ethanol transportation infrastructure development in Brazil, namely the three pipelines which will connect the ethanol supply regions to major consumption areas, would further increase the Brazilian total ethanol supply. Finally, the model results highlight how the fuel policy in Brazil is a sensitive issue. Given the flexibility of Brazilian fuel consumers to switch between gasohol and E100, decreasing the ethanol blending rates under an ethanol supply shortfall would harm the light-duty vehicle users. This increases the consumption of ethanol by flex fuel vehicles, due to price effect, and the consumption of gasoline by conventional vehicles due to a larger share of gasoline in the fuel mix. In contrast, reducing the gasoline tax rate would make drivers better off, due to the increased consumption of gasohol and VKT, but this would increase GHG emissions significantly making a very costly trade-off for society and global environment.

Mathematical supply-chain modelling: Product analysis of cost and time

NASA Astrophysics Data System (ADS)

Easters, D. J.

2014-03-01

Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management.

SCRL-Model for Human Space Flight Operations Enterprise Supply Chain

NASA Technical Reports Server (NTRS)

Tucker, Brian

2010-01-01

Standard approach to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. End-to-end view. Total Lifecycle. Evaluate the readiness of the supply chain during the supply chain development phase.

Modeling methodology for supply chain synthesis and disruption analysis

NASA Astrophysics Data System (ADS)

Wu, Teresa; Blackhurst, Jennifer

2004-11-01

The concept of an integrated or synthesized supply chain is a strategy for managing today's globalized and customer driven supply chains in order to better meet customer demands. Synthesizing individual entities into an integrated supply chain can be a challenging task due to a variety of factors including conflicting objectives, mismatched incentives and constraints of the individual entities. Furthermore, understanding the effects of disruptions occurring at any point in the system is difficult when working toward synthesizing supply chain operations. Therefore, the goal of this research is to present a modeling methodology to manage the synthesis of a supply chain by linking hierarchical levels of the system and to model and analyze disruptions in the integrated supply chain. The contribution of this research is threefold: (1) supply chain systems can be modeled hierarchically (2) the performance of synthesized supply chain system can be evaluated quantitatively (3) reachability analysis is used to evaluate the system performance and verify whether a specific state is reachable, allowing the user to understand the extent of effects of a disruption.

Strategic information technology alliances for effective health-care supply chain management.

PubMed

Shih, Stephen C; Rivers, Patrick A; Hsu, H Y Sonya

2009-08-01

To gain and sustain competitive advantage, health-care providers have to continuously review and renovate their operational and information technology (IT) strategies through collaborative and cooperative endeavour with their supply chain channel members. This paper explores new ways of enhancing a health-care organization's responsiveness to changes and increasing its competitiveness through implementing strategic information technology alliances among channel members in a health-care supply chain network. An overview of issues and problems (e.g. bullwhip effect, negative externalities and free-riding phenomenon in multichannel supply chains) presented in the health-care supply chains is first delineated. This paper further goes over the issues of health-care supply chain coordination and integration for strategic IT alliances, followed by the discussion of the spillover effect of IT investments. A number of viable IT practices (such as information sharing and Internet-enabled supply chain portal) for effective health-care supply chain collaboration and coordination are then examined in this research. Finally, the paper discusses how strategic IT alliances can help improve the effectiveness of health-care supply chain management.

Effect of Ethanol and Ethanol Biodegradation Products on Prospects for Natural Anaerobic Biodegradation of Benzene at Gasoline Spill Sites

EPA Science Inventory

There has been an increasing use of biofuels (ethanol in particular) in the fuel supply nationwide, and an increase in the number of stations that sell gasoline that contains more than 10% ethanol. The U.S. EPA needs to understand the fate of these materials if they are released ...

L-cysteine-derived ambidextrous gelators of aromatic solvents and ethanol/water mixtures.

PubMed

Pal, Amrita; Dey, Joykrishna

2013-02-19

A series of L-cysteine-derived double hydrocarbon chain amphiphilic gelators L-(3-alkyl-carbamoylsulfanyl)-2-(3-alkylurido)propionic acid with different hydrocarbon chain lengths (C6-C16) was designed and synthesized. These gelators efficiently gelate only aromatic solvents. The gelation ability increased with the increase of chain length up to C14, but then it dropped with further increase of chain length. The C12 and C14 derivatives also gelled ethanol/water mixtures. The gels were characterized by a number of methods, including FT-IR, NMR, and XRD spectroscopy, electron microscopy, and rheology. The amphiphiles were observed to form either flat lamellar or ribbonlike aggregates in aromatic solvents as well as in ethanol/water mixtures. The gelation in all the solvents employed was observed to be thermoreversible. The gel-to-sol transition temperature as well as mechanical strength of the organogels were observed to increase with the hydrocarbon chain length. Both types of gels of C8-C16 amphiphiles have gel-to-sol transition temperatures above the physiological temperature (310 K). FT-IR and variable temperature (1)H NMR measurements suggested that van der Waals interactions have major contribution in the gelation process. The gel-to-sol transition temperature and mechanical strength of the organogels in ethanol/water mixtures was observed to be higher than those of benzene organogel.

Enterprise Sustainment Metrics

DTIC Science & Technology

2015-06-19

Ponte Verde Beach: Supply Chain Management Institute. Lambert, D. M., & Pohlen, T. L. (2014). Supply Chain Metrics. In D. M. Lambert, Supply Chain...Partnerships, Performance (pp. 239-256). Ponte Verde Beach: Supply Chain Management Institute Mills, J. S. (1843). A System of Logic, Ratiocinative and

78 FR 50394 - Advisory Committee on Supply Chain Competitiveness: Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... DEPARTMENT OF COMMERCE International Trade Administration Advisory Committee on Supply Chain... discussion for a public meeting of the Advisory Committee on Supply Chain Competitiveness (Committee). DATES... growth competitiveness, foster national economic competitiveness, and improve U.S. supply chain...

An intelligent traceability system: Efficient tool for a supply chain sustainability

NASA Astrophysics Data System (ADS)

Bougdira, Abdesselam; Ahaitouf, Abdelaziz; Akharraz, Ismail

2016-07-01

The supply chain sustainability becomes a necessity for a smooth, a rapid and a fluid economic transaction. To reach a sustainable supply chain, we propose to focus attention on products and their lifecycle. So, we consider the traceability as a major success key to ensure the supply chain sustainability. For that, we consider a supply chain design that use an intelligent products traced by an intelligent traceability system. This system identifies, restores history and properties of a product, besides it tracks, in real-time a product. This solution can, also, bring, in the product environment, appropriate adjustments to prevent any risk of threatening qualities for the product. So, it helps supply chain contributors making the sustainable adjustments and the instant benchmark of the supply chain sustainability.

SCRL-Model for Human Space Flight Operations Enterprise Supply Chain

NASA Technical Reports Server (NTRS)

Tucker, Brian; Paxton, Joseph

2010-01-01

This paper will present a Supply Chain Readiness Level (SCRL) model that can be used to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. It will also show that using SCRL in conjunction with Technology Readiness Levels (TRLs), Manufacturing Readiness Levels (MRLs) and National Aeronautics Space Administrations (NASA s) Project Lifecycle Process will provide a more complete means of developing and evaluating a robust sustainable supply chain that encompasses the entire product, system and mission lifecycle. In addition, it will be shown that by implementing the SCRL model, NASA can additionally define supplier requirements to enable effective supply chain management (SCM). Developing and evaluating overall supply chain readiness for any product, system and mission lifecycle is critical for mission success. Readiness levels are presently being used to evaluate the maturity of technology and manufacturing capability during development and deployment phases of products and systems. For example, TRLs are used to support the assessment of the maturity of a particular technology and compare maturity of different types of technologies. MRLs are designed to assess the maturity and risk of a given technology from a manufacturing perspective. In addition, when these measurement systems are used collectively they can offer a more comprehensive view of the maturity of the system. While some aspects of the supply chain and supply chain planning are considered in these familiar metric systems, certain characteristics of an effective supply chain, when evaluated in more detail, will provide an improved insight into the readiness and risk throughout the supply chain. Therefore, a system that concentrates particularly on supply chain attributes is required to better assess enterprise supply chain readiness.

77 FR 58811 - Advisory Committee on Supply Chain Competitiveness Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... DEPARTMENT OF COMMERCE International Trade Administration Advisory Committee on Supply Chain... open meeting. SUMMARY: This notice announces a public meeting of the Advisory Committee on Supply Chain..., Washington, DC 20230. Public comments may be mailed to Advisory Committee on Supply Chain Competitiveness...

Learning to Integrate: Supply Chains Reconceptualised

ERIC Educational Resources Information Center

Sense, Andrew J.; Clements, Michael D. J.

2007-01-01

This paper introduces and explains a conception of supply chains from a situated learning perspective. This non-conventional supply chain perspective invites the reader to consider supply chain scenarios as "situated learning opportunities involving multiple communities of practice" interacting and participating together. It is argued that by…

Barriers affecting successful technology enablement of supply chain: An Indian perspective

NASA Astrophysics Data System (ADS)

Arora, R.; Haleem, A.; Farooquie, J. A.

2018-03-01

In order to compete, organizations need to focus on improving supply chain and technology acts as a major enabler. Technology enablement of supply chain has not always been successful and has been examined by many researchers. The purpose of this paper is to do a systematic literature review of technology enabled supply chain from a strategic viewpoint. The literature is examined from two perspectives. Firstly, it studies the growing interest in technology-enabled supply chain in India. Secondly, it studies barriers affecting technology enablement of supply chain. The literature review identifies that technology enabled supply chain helps in improving performance via effective decision making, monitoring entire supply chain, faster reaction to customer service problems, etc. The research has emphasized the importance of 12 barriers affecting technology enablement. This research will help as a guide for practitioners in order to successfully implement technology and fills the gap in existing literature by highlighting and consolidating the significant research work done in past.

Understanding your supply chain to reduce the risk of supply chain disruption.

PubMed

Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

2012-01-01

Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

Can We Defend the Defense Supply Chain Lessons Learned from Industry Leaders in Supply Chain Management

DTIC Science & Technology

2018-03-01

Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and...chain, including products, services, information , finances, demand, relationships, and risks. In a more complete definition, supply chain management ...CHAIN? LESSONS LEARNED FROM INDUSTRY LEADERS IN SUPPLY CHAIN MANAGEMENT by Ronald H. Menz March 2018 Thesis Co-Advisors: Rodrigo Nieto-Gomez

Fuel ethanol production from agricultural residues

USDA-ARS?s Scientific Manuscript database

Ethanol is a renewable oxygenated fuel. In 2012, about 13.3 billion gallons of fuel ethanol was produced from corn in the USA which makes up 10% of gasoline supply. Various agricultural residues such as corn stover, wheat straw, rice straw and barley straw can serve as low-cost lignocellulosic fee...

Ethanol tolerance in Aspergillus niger and Escherichia coli phytase

USDA-ARS?s Scientific Manuscript database

The expanded use of corn and other grain for biofuels have created an increased supply of dried grains with soluble (DDGS) and other byproducts of ethanol fermentation. Elevated levels of phytic acid in this DDGS indicate that ethanol is denaturing the native phytase produced by the yeast, Saccharo...

Site Characterization of Ethanol-Blended Fuel Releases

EPA Science Inventory

There has been an increasing use of biofuels (ethanol in particular) in the fuel supply nationwide, and an increase in the number of stations that sell gasoline that contains more than 10% ethanol. The U.S. EPA needs to understand the fate of these materials if they are released ...

Composition and Behavior of Fuel Ethanol

EPA Science Inventory

Ethanol usage in the United States has increased due in part to the elimination of methyl tert-butyl ether from the fuel supply and to the mandates of Congress. Two samples, one each from a wet mill and a dry mill ethanol plant, were obtained before denaturing. Each of these ...

A density functional theory study on the carbon chain growth of ethanol formation on Cu-Co (111) and (211) surfaces

NASA Astrophysics Data System (ADS)

Ren, Bohua; Dong, Xiuqin; Yu, Yingzhe; Wen, Guobin; Zhang, Minhua

2017-08-01

Calculations based on the first-principle density functional theory were carried out to study the most controversial reactions in ethanol formation from syngas on Cu-Co surfaces: CO dissociation mechanism and the key reactions of carbon chain growth of ethanol formation (HCO insertion reactions) on four model surfaces (Cu-Co (111) and (211) with Cu-rich or Co-rich surfaces) to investigate the synergy of the Cu and Co components since the complete reaction network of ethanol formation from syngas is a huge computational burden to calculate on four Cu-Co surface models. We investigated adsorption of important species involved in these reactions, activation barrier and reaction energy of H-assisted dissociation mechanism, directly dissociation of CO, and HCO insertion reactions (CHx + HCO → CHxCHO (x = 1-3)) on four Cu-Co surface models. It was found that reactions on Cu-rich (111) and (211) surfaces all have lower activation barrier in H-assisted dissociation and HCO insertion reactions, especially CH + HCO → CHCHO reaction. The PDOS of 4d orbitals of surface Cu and Co atoms of all surfaces were studied. Analysis of d-band center of Cu and Co atoms and the activation barrier data suggested the correlation between electronic property and catalytic performance. Cu-Co bimetallic with Cu-rich surface allows Co to have higher catalytic activity through the interaction of Cu and Co atom. Then it will improve the adsorption of CO and catalytic activity of Co. Thus it is more favorable to the carbon chain growth in ethanol formation. Our study revealed the factors influencing the carbon chain growth in ethanol production and explained the internal mechanism from electronic property aspect.

Don't break the chain: importance of supply chain management in the operating room setting.

PubMed

Bilyk, Candis

2008-09-01

Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.

Using SCOR as a Supply Chain Management Framework for Government Agency Contract Requirements

NASA Technical Reports Server (NTRS)

Paxton, Joe

2010-01-01

Enterprise Supply Chain Management consists of: Specifying suppliers to support inter-program and inter-agency efforts. Optimizing inventory levels and locations throughout the supply chain. Executing corrective actions to improve quality and lead time issues throughout the supply chain. Processing reported data to calculate and make visible supply chain performance (provide information for decisions and actions). Ensuring the right hardware and information is provided at the right time and in the right place. Monitoring the industrial base while developing, producing, operating and retiring a system. Seeing performance deep in the supply chain that could indicate issues affecting system availability and readiness.

75 FR 15440 - Guidance for Industry on Standards for Securing the Drug Supply Chain-Standardized Numerical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

...] Guidance for Industry on Standards for Securing the Drug Supply Chain--Standardized Numerical... industry entitled ``Standards for Securing the Drug Supply Chain-Standardized Numerical Identification for... the Drug Supply Chain-Standardized Numerical Identification for Prescription Drug Packages.'' In the...

78 FR 11155 - Advisory Committee on Supply Chain Competitiveness: Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... DEPARTMENT OF COMMERCE International Trade Administration Advisory Committee on Supply Chain... discussion for a public meeting of the Advisory Committee on Supply Chain Competitiveness (Committee). DATES... national economic competitiveness, and improve U.S. supply chain competitiveness in the domestic and global...

76 FR 68159 - Establishment of the Advisory Committee on Supply Chain Competitiveness and Solicitation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... on Supply Chain Competitiveness and Solicitation of Nominations for Membership AGENCY: International Trade Administration, DOC. ACTION: Notice of establishment of the Advisory Committee on Supply Chain... the establishment of the Advisory Committee on Supply Chain Competitiveness (the Committee) by the...

Modelling inter-supply chain competition with resource limitation and demand disruption

NASA Astrophysics Data System (ADS)

Chen, Zhaobo; Teng, Chunxian; Zhang, Ding; Sun, Jiayi

2016-05-01

This paper proposes a comprehensive model for studying supply chain versus supply chain competition with resource limitation and demand disruption. We assume that there are supply chains with heterogeneous supply network structures that compete at multiple demand markets. Each supply chain is comprised of internal and external firms. The internal firms are coordinated in production and distribution and share some common but limited resources within the supply chain, whereas the external firms are independent and do not share the internal resources. The supply chain managers strive to develop optimal strategies in terms of production level and resource allocation in maximising their profit while facing competition at the end market. The Cournot-Nash equilibrium of this inter-supply chain competition is formulated as a variational inequality problem. We further study the case when there is demand disruption in the plan-execution phase. In such a case, the managers need to revise their planned strategy in order to maximise their profit with the new demand under disruption and minimise the cost of change. We present a bi-criteria decision-making model for supply chain managers and develop the optimal conditions in equilibrium, which again can be formulated by another variational inequality problem. Numerical examples are presented for illustrative purpose.

Research on Coordination of Fresh Produce Supply Chain in Big Market Sales Environment

PubMed Central

Su, Juning; Liu, Chenguang

2014-01-01

In this paper, we propose two decision models for decentralized and centralized fresh produce supply chains with stochastic supply and demand and controllable transportation time. The optimal order quantity and the optimal transportation time in these two supply chain systems are derived. To improve profits in a decentralized supply chain, based on analyzing the risk taken by each participant in the supply chain, we design a set of contracts which can coordinate this type of fresh produce supply chain with stochastic supply and stochastic demand, and controllable transportation time as well. We also obtain a value range of contract parameters that can increase profits of all participants in the decentralized supply chain. The expected profits of the decentralized setting and the centralized setting are compared with respect to given numerical examples. Furthermore, the sensitivity analyses of the deterioration rate factor and the freshness factor are performed. The results of numerical examples show that the transportation time is shorter, the order quantity is smaller, the total profit of whole supply chain is less, and the possibility of cooperation between supplier and retailer is higher for the fresh produce which is more perishable and its quality decays more quickly. PMID:24764770

Research on coordination of fresh produce supply chain in big market sales environment.

PubMed

Su, Juning; Wu, Jiebing; Liu, Chenguang

2014-01-01

In this paper, we propose two decision models for decentralized and centralized fresh produce supply chains with stochastic supply and demand and controllable transportation time. The optimal order quantity and the optimal transportation time in these two supply chain systems are derived. To improve profits in a decentralized supply chain, based on analyzing the risk taken by each participant in the supply chain, we design a set of contracts which can coordinate this type of fresh produce supply chain with stochastic supply and stochastic demand, and controllable transportation time as well. We also obtain a value range of contract parameters that can increase profits of all participants in the decentralized supply chain. The expected profits of the decentralized setting and the centralized setting are compared with respect to given numerical examples. Furthermore, the sensitivity analyses of the deterioration rate factor and the freshness factor are performed. The results of numerical examples show that the transportation time is shorter, the order quantity is smaller, the total profit of whole supply chain is less, and the possibility of cooperation between supplier and retailer is higher for the fresh produce which is more perishable and its quality decays more quickly.

Supply chain planning classification

NASA Astrophysics Data System (ADS)

Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans

2001-10-01

Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.

Evolutionary Game Model Study of Construction Green Supply Chain Management under the Government Intervention

NASA Astrophysics Data System (ADS)

Xing, Yuanzhi; Deng, Xiaoyi

2017-11-01

The paper first has defined the concepts of green supply chain management and evolution game theory, and pointed out the characteristics of green supply chain management in construction. The main participants and key links of the construction green supply chain management are determined by constructing the organization framework. This paper established the evolutionary game model between construction enterprises and recycling enterprises for the green supply chain closed-loop structure. The waste recycling evolutionary stability equilibrium solution is obtained to explore the principle and effective scope of government policy intervention. This paper put forward the relevant countermeasures to the green supply chain management in construction recycling stage from the government point of view. The conclusion has reference value and guidance to the final product construction enterprises, recycling enterprises and the government during green supply chain.

77 FR 7133 - Advisory Committee on Supply Chain Competitiveness Solicitation of Nominations for Membership

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... DEPARTMENT OF COMMERCE International Trade Administration Advisory Committee on Supply Chain... Organizations or Entities, Including Ports, To Apply for Membership on the Advisory Committee on Supply Chain... organizations or entities, including ports, to serve as members of the Advisory Committee on Supply Chain...

76 FR 77778 - Amendment to Notice of Establishment of the Advisory Committee on Supply Chain Competitiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... the Advisory Committee on Supply Chain Competitiveness and Solicitation of Nominations for Membership... establishment of the Advisory Committee on Supply Chain Competitiveness and solicitation of nominations for..., 2011, Federal Register the establishment of the Advisory Committee on Supply Chain Competitiveness (the...

76 FR 41525 - Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles Management Unit Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... Parts Supply Chain, Global Product Life Cycles Management Unit Including Teleworkers Reporting to... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit...). Since eligible workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles...

A quantitative metric to identify critical elements within seafood supply networks.

PubMed

Plagányi, Éva E; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical.

A Quantitative Metric to Identify Critical Elements within Seafood Supply Networks

PubMed Central

Plagányi, Éva E.; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J.; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H.; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical. PMID:24633147

Analysing the external supply chain risk driver competitiveness: a risk mitigation framework and business continuity plan.

PubMed

Blos, Mauricio F; Wee, Hui-Ming; Yang, Joshua

2010-11-01

Innovation challenges for handling supply chain risks have become one of the most important drivers in business competitiveness and differentiation. This study analyses competitiveness at the external supply chain level as a driver of risks and provides a framework for mitigating these risks. The mitigation framework, also called the supply chain continuity framework, provides insight into six stages of the business continuity planning (BCP) process life cycle (risk mitigation management, business impact analysis, supply continuity strategy development, supply continuity plan development, supply continuity plan testing and supply continuity plan maintenance), together with the operational constructs: customer service, inventory management, flexibility, time to market, ordering cycle time and quality. The purpose of the BCP process life cycle and operational constructs working together is to emphasise the way in which a supply chain can deal with disruption risks and, consequently, bring competitive advantage. Future research will consider the new risk scenarios and analyse the consequences to promote the improvement of supply chain resilience.

Robust design of (s, S) inventory policy parameters in supply chains with demand and lead time uncertainties

NASA Astrophysics Data System (ADS)

Karimi Movahed, Kamran; Zhang, Zhi-Hai

2015-09-01

Demand and lead time uncertainties have significant effects on supply chain behaviour. In this paper, we present a single-product three-level multi-period supply chain with uncertain demands and lead times by using robust techniques to study the managerial insights of the supply chain inventory system under uncertainty. We formulate this problem as a robust mixed-integer linear program with minimised expected cost and total cost variation to determine the optimal (s, S) values of the inventory parameters. Several numerical studies are performed to investigate the supply chain behaviour. Useful guidelines for the design of a robust supply chain are also provided. Results show that the order variance and the expected cost in a supply chain significantly increase when the manufacturer's review period is an integer ratio of the distributor's and the retailer's review periods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Amy Cha-Tien; Downes, Paula Sue; Heinen, Russell

Analysis of chemical supply chains is an inherently complex task, given the dependence of these supply chains on multiple infrastructure systems (e.g., the petroleum sector, transportation, etc.). This effort requires data and information at various levels of resolution, ranging from network-level distribution systems to individual chemical reactions. Sandia National Laboratories (Sandia) has integrated its existing simulation and infrastructure analysis capabilities with chemical data models to analyze the chemical supply chains of several nationally critical chemical commodities. This paper describes how Sandia models the ethylene supply chain; that is, the supply chain for the most widely used raw material for plasticsmore » production including a description of the types of data and modeling capabilities that are required to represent the ethylene supply chain. The paper concludes with a description of Sandia's use the model to project how the supply chain would be affected by and adapt to a disruptive scenario hurricane.« less

Network evolution model for supply chain with manufactures as the core.

PubMed

Fang, Haiyang; Jiang, Dali; Yang, Tinghong; Fang, Ling; Yang, Jian; Li, Wu; Zhao, Jing

2018-01-01

Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model.

Network evolution model for supply chain with manufactures as the core

PubMed Central

Jiang, Dali; Fang, Ling; Yang, Jian; Li, Wu; Zhao, Jing

2018-01-01

Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model. PMID:29370201

Selected Aspects Of The Risk In The Supply Chain In Context Of The Supplier Quality Management

NASA Astrophysics Data System (ADS)

Koblen, Ivan; Lestyánszka Škůrková, Katarína

2015-06-01

The introductory part of the paper underlines the importance of "Risk-based thinking" in the Quality Management System (QMS) and risk in the supply chain, as a principle part of the QMS. After introducing the key terms, the authors focused on the principle part of the article - explanation of the external and internal supply chain risks and the main factors concerning the supply risks, demand risks and environmental risks (as cardinal types of external supply chain risks) as well as the manufacturing and process risks, network/planning and control risks (as most important types of internal supply chain risks). The authors inform on the selected supply chain risk management tools, especially on those which are linked to the appropriate utilization of quality management tools.

Supply Chain: Wake Up; It is Critical to Military Success

DTIC Science & Technology

2015-04-13

In 1998, Steve Jobs hired Tim Cook to improve the supply chain. Cook determined that Apple’s supply chain was overly complex and began a process...Blanchard concurs stating that, “a one supply chain fits all strategy [is a recipe for disaster].”29 They both believe that companies increase their

What Happens When the Supply Chain Breaks? Implications for the Army Supply Chain Under Attack

DTIC Science & Technology

2003-05-22

Supply Chain Integration office with Secretariat level leadership to facilitate DoD Component implementation of supply chain management practices...rather than cyber attack. Tim Belcher, Chief Technology Officer for Riptech, a computer security firm said “It was always assumed that a small group of

Visualisation for System Learning in Supply Chains

ERIC Educational Resources Information Center

Lindskog, Magnus; Abrahamsson, Mats; Aronsson, Hakan

2007-01-01

Contemporary supply chains are vastly complex, and decisions made by actors have system-wide consequences that these might not be able to foresee. There are gaps between "best practice"-founded theory and actual practice in supply chains. To remedy this, we argue, the supply chain actors need to enhance systems knowledge. There is a need to…

Using Game Theory to Predict Supply Chain Cooperation

ERIC Educational Resources Information Center

Lutz, Heather; Vang, David O.; Raffield, William D.

2012-01-01

The motivation for this research was to understand under what conditions supply chain cooperation might be feasible and under what circumstances it is not. Whereas previous research focuses on dyads in a supply chain, our research seeks to examine a possible factor that can explain why truly cooperative supply chains involving more than two firms…

76 FR 78929 - Establishing Timeframes for Implementation of Product Safety Labeling Changes; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-20

... labeling; (2) supply chain issues; and, (3) other issues. FDA may use the information received to develop...? B. Supply Chain Issues 3. What are the supply chain factors (including storage, shipping, and... the optimal point in the supply chain (e.g., newly manufactured product, newly shipped product) and...

Increasing Capacity Exploitation in Food Supply Chains Using Grid Concepts

NASA Astrophysics Data System (ADS)

Volk, Eugen; Müller, Marcus; Jacob, Ansger; Racz, Peter; Waldburger, Martin

Food supply chains today are characterized by fixed trade relations with long term contracts established between heterogeneous supply chain companies. Production and logistics capacities of these companies are often utilized in an economically inefficient manner only. In addition, increased consumer awareness in food safety issues renders supply chain management even more challenging, since integrated tracking and tracing along the whole food supply chain is needed. Facing these issues of supply chain management complexity and completely documented product quality, this paper proposes a full lifecycle solution for dynamic capacity markets based on concepts used in the field of Grid [1], like management of Virtual Organization (VO) combined with Service Level Agreement (SLA). The solution enables the cost-efficient utilization of real world capacities (e.g., production capacities or logistics facilities) by using a simple, browser-based portal. Users are able to enter into product-specific negotiations with buyers and suppliers of a food supply chain, and to obtain real-time access to product information including SLA evaluation reports. Thus, business opportunities in wider market access, process innovation, and trustworthy food products are offered for participating supply chain companies.

Lignocellulosic crop supply chains (eg, Miscanthus, switchgrass, reed canary grass, rye, giant reed, etc.) Chapter 12 of "Biomass Supply Chains for Bioenergy and Biorefining"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roni, Mohammad S.; Cafferty, Kara G.; Hess, J. Richard

This chapter provides an overview of lignocellulosic crop supply chains such as Miscanthus, switch grass, reed canary grass, rye, and giant reed by outlining typical logistic operations in support of a liquid biofuel market. We present two strategies for managing feedstocks within the biomass supply system: (1) the conventional bale feedstock supply system and (2) the advanced supply system concept. Finally, we discuss feedstock blending and integrated landscape management as innovative improvements to the lignocellulosic crop supply chain.

Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

PubMed

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain.

PubMed

Lee, Yumi; Song, Sang Hwa; Cheong, Taesu

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company's sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers.

Promise and problems with supply chain management approaches to health care purchasing.

PubMed

Ford, Eric W; Scanlon, Dennis P

2007-01-01

Double-digit health care inflation, coupled with widespread reports of poor care quality and deadly medical errors, has caused private sector employers to reevaluate their health benefits purchasing strategies, with a focus on supply chain management approaches. In other industries, this strategy has proven to be an effective method for simultaneously reducing costs and increasing quality. This article describes four current applications of supply chain management network methodologies to health care systems and identifies potential ways to improve purchasers' return on investment. In particular, information exchanges, purchase decision, and payment agreement components of integrated supply chains are described. First, visual depictions of the health care supply chain are developed from a purchaser's perspective. Next, five nationwide programs designed to realign incentives and rewards across the health care supply chain are described. Although several nationwide efforts are gaining traction in the marketplace, at this time, no cost reduction and quality improvement program initiative appears to systematically align the entire health care supply chain from providers to purchasers, raising doubt about the ability of supply chain management network techniques to significantly impact the health care marketplace in the short run. Current individual efforts to coordinate the health care supply chain do not act on all of the actors necessary to improve outcomes, promote safety, and control costs. Nevertheless, there are indications that several of the individual efforts are coming together. If national efforts touching on all critical elements can coordinate with purchasers, then the health care supply chain's performance may improve significantly.

The feasibility of producing adequate feedstock for year–round cellulosic ethanol production in an intensive agricultural fuelshed

USGS Publications Warehouse

Uden, Daniel R.; Mitchell, Rob B.; Allen, Craig R.; Guan, Qingfeng; McCoy, Tim D.

2013-01-01

To date, cellulosic ethanol production has not been commercialized in the United States. However, government mandates aimed at increasing second-generation biofuel production could spur exploratory development in the cellulosic ethanol industry. We conducted an in-depth analysis of the fuelshed surrounding a starch-based ethanol plant near York, Nebraska that has the potential for cellulosic ethanol production. To assess the feasibility of supplying adequate biomass for year-round cellulosic ethanol production from residual maize (Zea mays) stover and bioenergy switchgrass (Panicum virgatum) within a 40-km road network service area of the existing ethanol plant, we identified ∼14,000 ha of marginally productive cropland within the service area suitable for conversion from annual rowcrops to switchgrass and ∼132,000 ha of maize-enrolled cropland from which maize stover could be collected. Annual maize stover and switchgrass biomass supplies within the 40-km service area could range between 429,000 and 752,000 metric tons (mT). Approximately 140–250 million liters (l) of cellulosic ethanol could be produced, rivaling the current 208 million l annual starch-based ethanol production capacity of the plant. We conclude that sufficient quantities of biomass could be produced from maize stover and switchgrass near the plant to support year-round cellulosic ethanol production at current feedstock yields, sustainable removal rates and bioconversion efficiencies. Modifying existing starch-based ethanol plants in intensive agricultural fuelsheds could increase ethanol output, return marginally productive cropland to perennial vegetation, and remove maize stover from productive cropland to meet feedstock demand.

Fuzzy Entropy Method for Quantifying Supply Chain Networks Complexity

NASA Astrophysics Data System (ADS)

Zhang, Jihui; Xu, Junqin

Supply chain is a special kind of complex network. Its complexity and uncertainty makes it very difficult to control and manage. Supply chains are faced with a rising complexity of products, structures, and processes. Because of the strong link between a supply chain’s complexity and its efficiency the supply chain complexity management becomes a major challenge of today’s business management. The aim of this paper is to quantify the complexity and organization level of an industrial network working towards the development of a ‘Supply Chain Network Analysis’ (SCNA). By measuring flows of goods and interaction costs between different sectors of activity within the supply chain borders, a network of flows is built and successively investigated by network analysis. The result of this study shows that our approach can provide an interesting conceptual perspective in which the modern supply network can be framed, and that network analysis can handle these issues in practice.

Requirements of supply chain management in differentiating European pork chains.

PubMed

Trienekens, Jacques; Wognum, Nel

2013-11-01

This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. The paper shows the importance of Quality Management Systems for integrating supply chains and enhancing consumer confidence. The paper also presents innovations in information system integration for aligning information exchange in the supply chain and logistics concepts based on innovative measurement technologies at the slaughterhouse stage. In the final section research challenges towards sustainable pork supply chains satisfying current consumer demands are presented. Copyright © 2013 Elsevier Ltd. All rights reserved.

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective

PubMed Central

Su, Shong-Iee Ivan

2017-01-01

In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV) industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies) considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to combat the global warming effect. Several subsidy policies such as shared solar energy arrangements and performance-based incentive (PBI) are proposed to integrate the market users and the PV supply chains. This study serves as a pioneering study into the dual PV supply chain research which is very limited in the PV management and policy study literature. The findings and several untended issues provide a foundation for the future PV supply chain studies. PMID:29156653

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective.

PubMed

Chen, Zhisong; Su, Shong-Iee Ivan

2017-11-20

In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV) industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies) considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to combat the global warming effect. Several subsidy policies such as shared solar energy arrangements and performance-based incentive (PBI) are proposed to integrate the market users and the PV supply chains. This study serves as a pioneering study into the dual PV supply chain research which is very limited in the PV management and policy study literature. The findings and several untended issues provide a foundation for the future PV supply chain studies.

Structural transformations, composition anomalies and a dramatic collapse of linear polymer chains in dilute ethanol-water mixtures.

PubMed

Banerjee, Saikat; Ghosh, Rikhia; Bagchi, Biman

2012-03-29

Water-ethanol mixtures exhibit many interesting anomalies, such as negative excess partial molar volume of ethanol, excess sound absorption coefficient at low concentrations, and positive deviation from Raoult's law for vapor pressure, to mention a few. These anomalies have been attributed to different, often contradictory origins, but a quantitative understanding is still lacking. We show by computer simulation and theoretical analyses that these anomalies arise from the sudden emergence of a bicontinuous phase that occurs at a relatively low ethanol concentration of x(eth) ≈ 0.06-0.10 (that amounts to a volume fraction of 0.17-0.26, which is a significant range!). The bicontinuous phase is formed by aggregation of ethanol molecules, resulting in a weak phase transition whose nature is elucidated. We find that the microheterogeneous structure of the mixture gives rise to a pronounced nonmonotonic composition dependence of local compressibility and nonmonotonic dependence in the peak value of the radial distribution function of ethyl groups. A multidimensional free energy surface of pair association is shown to provide a molecular explanation of the known negative excess partial volume of ethanol in terms of parallel orientation and hence better packing of the ethyl groups in the mixture due to hydrophobic interactions. The energy distribution of the ethanol molecules indicates additional energy decay channels that explain the excess sound attenuation coefficient in aqueous alcohol mixtures. We studied the dependence of the solvation of a linear polymer chain on the composition of the water-ethanol solvent. We find that there is a sudden collapse of the polymer at x(eth) ≈ 0.05-a phenomenon which we attribute to the formation of the microheterogeneous structures in the binary mixture at low ethanol concentrations. Together with recent single molecule pulling experiments, these results provide new insight into the behavior of polymer chain and foreign solutes, such as enzymes, in aqueous binary mixtures.

Simulating the Afghanistan-Pakistan opium supply chain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watkins, Jennifer H; MacKerrow, Edward P; Merritt, Terence M

2010-04-08

This paper outlines an opium supply chain using the Hilmand province of Afghanistan as exemplar. The opium supply chain model follows the transformation of opium poppy seed through cultivation and chemical alteration to brown heroin base. The purpose of modeling and simulating the Afghanistan-Pakistan opium supply chain is to discover and test strategies that will disrupt this criminal enterprise.

Winners and losers in the complex web of global supply chains.

PubMed

Glendon, Lee

2013-01-01

This paper discusses how supply chain, risk and business continuity professionals can collaboratively address the consequences of increasing supply chain complexity in order to deliver both resilient and sustainable supply chains. The paper identifies the key drivers of complexity supported by recent case examples, including the equine DNA scandal and the Rana Plaza tragedy in Bangladesh.

Open-Source ERP: Is It Ripe for Use in Teaching Supply Chain Management?

ERIC Educational Resources Information Center

Huynh, Minh Q.; Chu, Hung W.

2011-01-01

The field of supply chain management has changed greatly and rapidly. With the advent of enterprise systems, supply chains are now operating with up-to-the-minute information. The value of the information flow is marked by speed, accessibility, accuracy, and most of all relevancy. As it continually evolves, the supply chain management curriculum…

U.S. Offshore Wind Manufacturing and Supply Chain Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, Bruce

2013-02-22

This report seeks to provide an organized, analytical approach to identifying and bounding uncertainties around offshore wind manufacturing and supply chain capabilities; projecting potential component-level supply chain needs under three demand scenarios; and identifying key supply chain challenges and opportunities facing the future U.S. market and current suppliers of the nation’s landbased wind market.

Optimizing bi-objective, multi-echelon supply chain model using particle swarm intelligence algorithm

NASA Astrophysics Data System (ADS)

Sathish Kumar, V. R.; Anbuudayasankar, S. P.; Rameshkumar, K.

2018-02-01

In the current globalized scenario, business organizations are more dependent on cost effective supply chain to enhance profitability and better handle competition. Demand uncertainty is an important factor in success or failure of a supply chain. An efficient supply chain limits the stock held at all echelons to the extent of avoiding a stock-out situation. In this paper, a three echelon supply chain model consisting of supplier, manufacturing plant and market is developed and the same is optimized using particle swarm intelligence algorithm.

System Dynamics Modeling for Supply Chain Information Sharing

NASA Astrophysics Data System (ADS)

Feng, Yang

In this paper, we try to use the method of system dynamics to model supply chain information sharing. Firstly, we determine the model boundaries, establish system dynamics model of supply chain before information sharing, analyze the model's simulation results under different changed parameters and suggest improvement proposal. Then, we establish system dynamics model of supply chain information sharing and make comparison and analysis on the two model's simulation results, to show the importance of information sharing in supply chain management. We wish that all these simulations would provide scientific supports for enterprise decision-making.

Identifying research advancements in supply chain risk management for Agri-food Industries: Literature review

NASA Astrophysics Data System (ADS)

Septiani, W.; Astuti, P.

2017-12-01

Agri-food supply chain has different characteristics related to the raw materials it uses. Food supply chain has a high risk of damage, thus drawing a lot of attention from researchers in supply chain management. This research aimed to investigate the development of supply chain risk management research on agri-food industries. These reviews were arranged in steps systematically, ranging from searching related to the review of SCRM paper, reviewing the general framework of SCRM and the framework of agri-food SCRM. Selection of literature review papers in the period 2005-2017, and obtained 45 papers. The results of the identification research were illustrated in a supply chain risk management framework model. This provided insight toward future research directions and needs.

Characterization of milled solid residue from cypress liquefaction in sub- and super ethanol.

PubMed

Liu, Hua-Min; Liu, Yu-Lan

2014-01-01

Cypress liquefaction in sub- and super ethanol was carried out in an autoclave at various temperatures. Milled solid residue (MSR) was isolated from solid residue remaining from the liquefaction process, and its chemical characteristics was comparatively investigated with milled wood lignin (MWL) of cypress by sugar analysis, elemental analysis, FT-IR analysis, gel permeation chromatography, and NMR analysis. Results showed that there were two reactions (de-polymerization and re-polymerization) during the cypress liquefaction in sub- and super ethanol and the re-polymerization reactions were the main reaction at 220-260°C. Considering the stability of side-chain, the stability of lignin side-chain in cypress during liquefaction process in ethanol could be sequenced as follows: β-5>β-β'>β-O-4'. The MSR were mainly from the decomposition and re-polymerization of lignin. This study suggests that characterization of MSR provides a promising method to investigate the mechanisms of cypress liquefaction in ethanol. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Supply chain management for small business--how to avoid being part of the food chain.

PubMed

Knechtges, J P; Watts, C A

2000-08-01

A supply chain is a series of customer and supplier relationships that extend throughout and beyond the company. It is an interwoven set of links that together form a chain supplying our customers in a seamless and integrated fashion delivering a high level of customer satisfaction. Supply chain management (SCM) integrates all activities so they are focused on customer satisfaction (both internally and externally). One of the things this article will attempt to accomplish is to provide a clear understanding of SCM's positive impact on customer service as well as on improving profitability, cash flow, product cycle times, and communication. Whether we go forward in the supply chain to the final end-user or backward in the supply chain to our supplier's suppliers, SCM will significantly improve our ability to serve our customers.

Essential tools of supply chain management.

PubMed

Buddress, L; Raedels, A

2000-08-01

At a recent conference, the keynote speaker provoked an incredulous response when he said, "Today, competition among individual firms is dead." He then went on to explain that today, competition is supply chain against supply chain. Whichever firm has the superior supply chain will win out in the marketplace. Given the global marketplace in which we all operate, most of us would agree that his statements are true. How does a firm establish a world-class supply base? What kinds of contracts and agreements are necessary to support the diverse requirements of today's firms? How should a firm select from among the available contract types? These are foundation questions for supply chain management.

Commitment to and preparedness for sustainable supply chain management in the oil and gas industry.

PubMed

Wan Ahmad, Wan Nurul K; Rezaei, Jafar; Tavasszy, Lóránt A; de Brito, Marisa P

2016-09-15

Our current dependency on the oil and gas (O&G) industry for economic development and social activities necessitates research into the sustainability of the industry's supply chains. At present, studies on sustainable supply chain management (SSCM) practices in the industry do not include firm-internal factors that affect the sustainability strategies employed by different functional areas of its supply chains. Our study aims to address this gap by identifying the relevant internal factors and exploring their relationship with SSCM strategies. Specifically, we discuss the commitment to and preparedness for sustainable practices of companies that operate in upstream and downstream O&G supply chain. We study the impact of these factors on their sustainability strategies of four key supply chain functions: supplier management, production management, product stewardship and logistics management. The analyses of data collected through a survey among 81 companies show that management preparedness may enhance sustainable supply chain strategies in the O&G industry more than commitment does. Among the preparedness measures, management of supply chain operational risks is found to be vital to the sustainability of all supply chain functions except for production management practices. The findings also highlight the central importance of supplier and logistics management to the achievement of sustainable O&G supply chains. Companies must also develop an organizational culture that encourages, for example, team collaboration and proactive behaviour to finding innovative sustainability solutions in order to translate commitment to sustainable practices into actions that can produce actual difference to their SSCM practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Understanding Transferable Supply Chain Lessons and Practices to a “High-Tech” Industry Using Guidelines from a Primary Sector Industry: A Case Study in the Food Industry Supply Chain

PubMed Central

Coronado Mondragon, Adrian E.; Coronado, Etienne S.

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848

Alignment of Information Systems with Supply Chains: Impacts on Supply Chain Performance and Organizational Performance

ERIC Educational Resources Information Center

Qrunfleh, Sufian M.

2010-01-01

Over the past decade, an important focus of researchers has been on supply chain management (SCM), as many organizations believe that effective SCM is the key to building and sustaining competitive advantage for their products/services. To manage the supply chain, companies need to adopt an SCM strategy (SCMS) and implement appropriate SCM…

78 FR 69267 - Defense Federal Acquisition Regulation Supplement: Requirements Relating to Supply Chain Risk...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

... Regulation Supplement: Requirements Relating to Supply Chain Risk (DFARS Case 2012-D050) AGENCY: Defense... for FY 2013. This interim rule allows DoD to consider the impact of supply chain risk in specified... Information Relating to Supply Chain Risk,'' as amended by section 806 of the NDAA for FY 2013 (Pub. L. 112...

Intelligence Support to Supply Chain Risk Management

DTIC Science & Technology

2012-06-01

of Master of Science in Operations Analysis Charles L. Carter, MA Major, USAF June 2012 DISTRIBUTION STATEMENT A. APPROVED FOR...literature regarding supply chain risk management and intelligence doctrine. This review established the importance of supply chain risk analysis to...risk analysis . This research culminated in the development of a methodology for intelligence professionals to use to support supply chain risk

Proactive Supply Chain Performance Management with Predictive Analytics

PubMed Central

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment. PMID:25386605

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

NASA Astrophysics Data System (ADS)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

Modeling sustainability in renewable energy supply chain systems

NASA Astrophysics Data System (ADS)

Xie, Fei

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate "environmental thinking" into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain under uncertainties. All models are mixed integer programs, which also involves multi-objective programming method and two-stage/multistage stochastic programming methods. In particular for the long-term sequential planning under uncertainties, to reduce the computational challenges due to the exponential expansion of the scenario tree, I also developed efficient ND-Max method which is more efficient than CPLEX and Nested Decomposition method. Through result analysis of four independent studies, it is found that the proposed modeling frameworks can effectively improve the economic performance, enhance environmental benefits and reduce risks due to systems uncertainties for the biofuel supply chain systems.

Proactive supply chain performance management with predictive analytics.

PubMed

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment.

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain

PubMed Central

Lee, Yumi; Song, Sang Hwa

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company’s sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers. PMID:29547625

Coordinating a supply chain with a loss-averse retailer and effort dependent demand.

PubMed

Li, Liying; Wang, Yong

2014-01-01

This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights.

Ergonomics and sustainability--challenges from global supply chains.

PubMed

Hasle, Peter; Jensen, Per Langaa

2012-01-01

The development of globalised supply chains is a major challenge for sustainability. For several years, there has been discussion within the profession whether and how ergonomics and human factors can play a role. Based on our research, we have identified five major challenges from global supply chains especially related to the social aspects of sustainability: (1) criteria for social sustainability, (2) the role of key performance indicators in the management of supply chains, (3) the constant changes in supply chains, (4) the challenge in establishing participation, and (5) the development of agency and regulatory mechanisms. There are obviously no clear and simple solutions to these challenges. One possible avenue for progress might lie in acquiring a greater understanding of the challenges from global supply chains and developing a strategy which combines social and long-term business sustainability. Starting from such a basis, the next step would be to find ways for the ergonomics and human factors community to create international collaboration which can impact specific global supply chains.

Coordinating a Supply Chain with a Loss-Averse Retailer and Effort Dependent Demand

PubMed Central

Li, Liying

2014-01-01

This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights. PMID:25197696

Integration of vaccine supply chains with other health commodity supply chains: a framework for decision making.

PubMed

Yadav, Prashant; Lydon, Patrick; Oswald, Julianna; Dicko, Modibo; Zaffran, Michel

2014-11-28

One of the primary objectives of National Immunization Programs is to strengthen and optimize immunization supply chains so that vaccines are delivered to the end recipients effectively, efficiently and sustainably. As a result of larger investments in global health and a wider portfolio of vaccines, global agencies are recognizing the need for vaccine supply chains to operate at their most optimal levels. Integration with other supply chains is often presented as a strategy to improve efficiency. However, it remains unclear if the proposed benefits from integration of vaccine supply chains with other supply chains will outweigh the costs. This paper provides a framework for deciding where such integration offers the most significant benefits. It also cautions about the pitfalls of integration as a one size fits all strategy. It also highlights the need for systematic collection of cost and efficiency data in order to understand the value of integration and other such initiatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

Implementation of system dynamic simulation method to optimize profit in supply chain network of vegetable product

NASA Astrophysics Data System (ADS)

Tama, I. P.; Akbar, Z.; Eunike, A.

2018-04-01

Vegetables are categorized as a perishable product, which is a product with short lifespan thus requires proper handling and planning to reduce losses caused by the short lifespan. In order to reduce the losses, coordination among the players in the supply chain is required. On the other hand, the decision in the supply chain of vegetables and other farming products in the traditional market of developing country is independent among the players. This research is conducted by using System Dynamic Simulation method to develop model and scenario by coordinating the supply quantity amongst players in the supply chain. The scenarios are developed based on newsboy inventory model. This study aims to compare scenarios combining tiers involved in coordination program. The result shows that coordination in supply chain increases total supply chain profit, although there will always be players who experienced decrements in profit. The scenario of coordination among the farmer, the distributor, and the wholesaler resulted in the highest increase in total supply chain profit compared to other coordination scenarios, with an increased value of 10.49%.

Ginger extract mitigates ethanol-induced changes of alpha and beta - myosin heavy chain isoforms gene expression and oxidative stress in the heart of male wistar rats.

PubMed

Shirpoor, Alireza; Zerehpoosh, Mitra; Ansari, Mohammad Hasan Khadem; Kheradmand, Fatemeh; Rasmi, Yousef

2017-09-01

The association between ethanol consumption and heart abnormalities, such as chamber dilation, myocyte damage, ventricular hypertrophy, and hypertension is well known. However, underlying molecular mediators involved in ethanol-induced heart abnormalities remain elusive. The aim of this study was to investigate the effect of chronic ethanol exposure on alpha and beta - myosin heavy chain (MHC) isoforms gene expression transition and oxidative stress in rats' heart. It was also planned to find out whether ginger extract mitigated the abnormalities induced by ethanol in rats' heart. Male wistar rats were divided into three groups of eight animals as follows: Control, ethanol, and ginger extract treated ethanolic (GETE) groups. After six weeks of treatment, the results revealed a significant increase in the β-MHC gene expression, 8- OHdG amount, and NADPH oxidase level. Furthermore, a significant decrease in the ratio of α-MHC/β-MHC gene expression to the amount of paraoxonase enzyme in the ethanol group compared to the control group was found. The consumption of Ginger extract along with ethanol ameliorated the changes in MHC isoforms gene expression and reduced the elevated amount of 8-OHdG and NADPH oxidase. Moreover, compared to the consumption of ethanol alone, it increased the paraoxonase level significantly. These findings indicate that ethanol-induced heart abnormalities may in part be associated with MHC isoforms changes mediated by oxidative stress, and that these effects can be alleviated by using ginger extract as an antioxidant molecule. Copyright © 2017 Elsevier B.V. All rights reserved.

Study of China green supply chain management policies and standard

NASA Astrophysics Data System (ADS)

Zhang, Xiaoxin; Huang, Jin; Lin, Ling

2017-11-01

With the highlight of the environment issues, manufacturing industry needs to be environmentally managed with integrated methods in system aspect. Green supply chain management, integrating the environment aspect into each step of the implement of supply chain management, is the key measure to improve the efficiency of environmental management and to remit the pollution. It also helps to make best use and configuration of the resources and has been attracting much attention from our government, enterprises and academia in recent years. This paper introduced the definition and content of green supply chain management, concluded the research progress of green supply chain management by domestic scholars, stated the characteristic and achievement of the implement of green supply chain management in China as well as analyzed the current existing problems and suggestions in the future.

Impact of carbon monoxide partial pressures on methanogenesis and medium chain fatty acids production during ethanol fermentation.

PubMed

Esquivel-Elizondo, Sofia; Miceli, Joseph; Torres, Cesar I; Krajmalnik-Brown, Rosa

2018-02-01

Medium-chain fatty acids (MCFA) are important biofuel precursors. Carbon monoxide (CO) is a sustainable electron and carbon donor for fatty acid elongation, since it is metabolized to MCFA precursors, it is toxic to most methanogens, and it is a waste product generated in the gasification of waste biomass. The main objective of this work was to determine if the inhibition of methanogenesis through the continuous addition of CO would lead to increased acetate or MCFA production during fermentation of ethanol. The effects of CO partial pressures (P CO ; 0.08-0.3 atm) on methanogenesis, fatty acids production, and the associated microbial communities were studied in batch cultures fed with CO and ethanol. Methanogenesis was partially inhibited at P CO  ≥ 0.11 atm. This inhibition led to increased acetate production during the first phase of fermentation (0-19 days). However, a second addition of ethanol (day 19) triggered MCFA production only at P CO  ≥ 0.11 atm, which probably occurred through the elongation of acetate with CO-derived ethanol and H 2 :CO 2 . Accordingly, during the second phase of fermentation (days 20-36), the distribution of electrons to acetate decreased at higher P CO , while electrons channeled to MCFA increased. Most probably, Acetobacterium, Clostridium, Pleomorphomonas, Oscillospira, and Blautia metabolized CO to H 2 :CO 2 , ethanol and/or fatty acids, while Peptostreptococcaceae, Lachnospiraceae, and other Clostridiales utilized these metabolites, along with the provided ethanol, for MCFA production. These results are important for biotechnological systems where fatty acids production are preferred over methanogenesis, such as in chain elongation systems and microbial fuel cells. © 2017 Wiley Periodicals, Inc.

The Research on Integrated Strategy of Supply Chain Information Systems in the Automobile Industry Based on Order-To-Delivery Mode

NASA Astrophysics Data System (ADS)

Li, Ming; Gan, Lianzhen; He, Xuefeng

The automotive industry there are different degrees of impairment of many companies supply chain IT strategy. In this paper, in which the automotive industry supply chain management business cooperation between enterprises loose, poor exchange of information leading to the presence or delays in product customization, supply of raw materials, material control, production planning and control, sales and service and a fast response propose a series of typical problems of scientific and rational supply chain information integration strategy. The strategy through the development system integration platform, improve internal ERP system, implementation of supply chain management and other methods. Put some protection principles in the information process, to ensure the correct implementation of supply chain IT strategy, and ultimately achieve collaborative business development concept and enhance the automotive industry as a whole level of information.

Developing sustainable food supply chains.

PubMed

Smith, B Gail

2008-02-27

This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

Flexibility evaluation of multiechelon supply chains.

PubMed

Almeida, João Flávio de Freitas; Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

2018-01-01

Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

Flexibility evaluation of multiechelon supply chains

PubMed Central

Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

2018-01-01

Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution. PMID:29584755

The Analysis of Orders of Perishable Goods in Relation to the Bullwhip Effect in the Logistic Supply Chain of the Food Industry: a Case Study

NASA Astrophysics Data System (ADS)

Chocholáč, Jan; Průša, Petr

2016-12-01

The bullwhip effect generally refers to the phenomenon where order variability increases as the orders move upstream in the supply chain. It is serious problem for every member of the supply chain. This effect begins at customers and passes through the chain to producers, which are at the end of the logistic chain. Especially food supply chains are affected by this issue. These chains are unique for problems of expiration of goods (particularly perishable goods), variable demand, orders with quantity discounts and effort to maximize the customer satisfaction. This paper will present the problem of the bullwhip effect in the real supply chain in the food industry. This supply chain consists of approximately 350 stores, four central warehouses and more than 1000 suppliers, but the case study will examine 87 stores, one central warehouse and one supplier in 2015. The aim of this paper is the analysis of the order variability between the various links in this chain and confirmation of the bullwhip effect in this chain. The subject of the analysis will be perishable goods.

Involvement of the mitochondrial permeability transition pore in chronic ethanol-mediated liver injury in mice

PubMed Central

King, Adrienne L.; Swain, Telisha M.; Mao, Zhengkuan; Udoh, Uduak S.; Oliva, Claudia R.; Betancourt, Angela M.; Griguer, Corrine E.; Crowe, David R.; Lesort, Mathieu

2013-01-01

Chronic ethanol consumption increases sensitivity of the mitochondrial permeability transition (MPT) pore induction in liver. Ca2+ promotes MPT pore opening, and genetic ablation of cyclophilin D (CypD) increases the Ca2+ threshold for the MPT. We used wild-type (WT) and CypD-null (CypD−/−) mice fed a control or an ethanol-containing diet to investigate the role of the MPT in ethanol-mediated liver injury. Ca2+-mediated induction of the MPT and mitochondrial respiration were measured in isolated liver mitochondria. Steatosis was present in WT and CypD−/− mice fed ethanol and accompanied by increased terminal deoxynucleotidyl transferase dUTP-mediated nick-end label-positive nuclei. Autophagy was increased in ethanol-fed WT mice compared with ethanol-fed CypD−/− mice, as reflected by an increase in the ratio of microtubule protein 1 light chain 3B II to microtubule protein 1 light chain 3B I. Higher levels of p62 were measured in CypD−/− than WT mice. Ethanol decreased mitochondrial respiratory control ratios and select complex activities in WT and CypD−/− mice. Ethanol also increased CypD protein in liver of WT mice. Mitochondria from control- and ethanol-fed WT mice were more sensitive to Ca2+-mediated MPT pore induction than mitochondria from their CypD−/− counterparts. Mitochondria from ethanol-fed CypD−/− mice were also more sensitive to Ca2+-induced swelling than mitochondria from control-fed CypD−/− mice but were less sensitive than mitochondria from ethanol-fed WT mice. In summary, CypD deficiency was associated with impaired autophagy and did not prevent ethanol-mediated steatosis. Furthermore, increased MPT sensitivity was observed in mitochondria from ethanol-fed WT and CypD−/− mice. We conclude that chronic ethanol consumption likely lowers the threshold for CypD-regulated and -independent characteristics of the ethanol-mediated MPT pore in liver mitochondria. PMID:24356880

Climate Leadership Award for Supply Chain Leadership

EPA Pesticide Factsheets

Apply to the Climate Leadership Award for Supply Chain Leadership, which publicly recognizes organizations that are are at the leading edge of managing greenhouse gas emissions in their organizational supply chains.

Modelling Lean and Green Supply Chain

NASA Astrophysics Data System (ADS)

Duarte, Susana Carla Vieira Lino Medina

The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the implementation of a hybrid supply chain.

Bioconversion of Sugarcane Biomass into Ethanol: An Overview about Composition, Pretreatment Methods, Detoxification of Hydrolysates, Enzymatic Saccharification, and Ethanol Fermentation

PubMed Central

Canilha, Larissa; Chandel, Anuj Kumar; Suzane dos Santos Milessi, Thais; Antunes, Felipe Antônio Fernandes; Luiz da Costa Freitas, Wagner; das Graças Almeida Felipe, Maria; da Silva, Silvio Silvério

2012-01-01

Depleted supplies of fossil fuel, regular price hikes of gasoline, and environmental damage have necessitated the search for economic and eco-benign alternative of gasoline. Ethanol is produced from food/feed-based substrates (grains, sugars, and molasses), and its application as an energy source does not seem fit for long term due to the increasing fuel, food, feed, and other needs. These concerns have enforced to explore the alternative means of cost competitive and sustainable supply of biofuel. Sugarcane residues, sugarcane bagasse (SB), and straw (SS) could be the ideal feedstock for the second-generation (2G) ethanol production. These raw materials are rich in carbohydrates and renewable and do not compete with food/feed demands. However, the efficient bioconversion of SB/SS (efficient pretreatment technology, depolymerization of cellulose, and fermentation of released sugars) remains challenging to commercialize the cellulosic ethanol. Among the technological challenges, robust pretreatment and development of efficient bioconversion process (implicating suitable ethanol producing strains converting pentose and hexose sugars) have a key role to play. This paper aims to review the compositional profile of SB and SS, pretreatment methods of cane biomass, detoxification methods for the purification of hydrolysates, enzymatic hydrolysis, and the fermentation of released sugars for ethanol production. PMID:23251086

Understanding and reducing the risk of supply chain disruptions.

PubMed

Clark, Graham

2012-01-01

Natural disasters can wreck havoc on business operations. When civil unrest swept the UK in August 2011, the effect on business was stark, losing the retail sector £300m in unexpected costs and lost revenues. On the other side of the world, the natural disaster that hit Japan in early 2011 is estimated to have run up costs in the region of £189bn in repairs. Beyond this, the earthquake and its aftermath shattered supply chains, with technology companies expecting delays of up to six months before business could resume fully. It is impossible to predict incidents like these, but businesses can help mitigate disruption in the supply chain by undertaking business continuity management (BCM). A flexible supply chain is essential when it comes to BCM - whether it means being able to cope with altering transport routes at short notice, or finding or replacing a supplier at the last minute. Understanding the supply chain is critical when responding to major impacts that affect supply chains in multiple points - like IT system failures and country-wide fuel strikes. Businesses should carry out detailed business impact assessments and risk assessments right across the end-to-end supply chain and not just at key single points of failure. It is an intensive process that needs dedicated resources and ownership at the highest level. Recognising this, DHL has designed a 10-step process, which it has implemented across its global supply chain business. This paper provides an overview of what a supply chain really looks like, what can cause disruptions and how far up/down the supply chain companies need to go with their BCM planning.

A mathematical/physics carbon emission reduction strategy for building supply chain network based on carbon tax policy

NASA Astrophysics Data System (ADS)

Li, Xueying; Peng, Ying; Zhang, Jing

2017-03-01

Under the background of a low carbon economy, this paper examines the impact of carbon tax policy on supply chain network emission reduction. The integer linear programming method is used to establish a supply chain network emission reduction such a model considers the cost of CO2 emissions, and analyses the impact of different carbon price on cost and carbon emissions in supply chains. The results show that the implementation of a carbon tax policy can reduce CO2 emissions in building supply chain, but the increase in carbon price does not produce a reduction effect, and may bring financial burden to the enterprise. This paper presents a reasonable carbon price range and provides decision makers with strategies towards realizing a low carbon building supply chain in an economical manner.

A review of agent-based modeling approach in the supply chain collaboration context

NASA Astrophysics Data System (ADS)

Arvitrida, N. I.

2018-04-01

Collaboration is considered as the key aspect of supply chain management (SCM) success. This issue has been addressed by many studies in recent years, but there are still few research employs agent-based modeling (ABM) approach to study business partnerships in SCM. This paper reviews the use of ABM in modeling collaboration in supply chains and inform the scope of ABM application in the existing literature. The review reveals that ABM can be an effective tool to address various aspects in supply chain relationships, but its applications in SCM studies are still limited. Moreover, where ABM is applied in the SCM context, most of the studies focus on software architecture rather than analyzing the supply chain issues. This paper also provides insights to SCM researchers about the opportunity uses of ABM in studying complexity in supply chain collaboration.

Landscaping the structures of GAVI country vaccine supply chains and testing the effects of radical redesign.

PubMed

Lee, Bruce Y; Connor, Diana L; Wateska, Angela R; Norman, Bryan A; Rajgopal, Jayant; Cakouros, Brigid E; Chen, Sheng-I; Claypool, Erin G; Haidari, Leila A; Karir, Veena; Leonard, Jim; Mueller, Leslie E; Paul, Proma; Schmitz, Michelle M; Welling, Joel S; Weng, Yu-Ting; Brown, Shawn T

2015-08-26

Many of the world's vaccine supply chains do not adequately provide vaccines, prompting several questions: how are vaccine supply chains currently structured, are these structures closely tailored to individual countries, and should these supply chains be radically redesigned? We segmented the 57 GAVI-eligible countries' vaccine supply chains based on their structure/morphology, analyzed whether these segments correlated with differences in country characteristics, and then utilized HERMES to develop a detailed simulation model of three sample countries' supply chains and explore the cost and impact of various alternative structures. The majority of supply chains (34 of 57) consist of four levels, despite serving a wide diversity of geographical areas and population sizes. These four-level supply chains loosely fall into three clusters [(1) 18 countries relatively more bottom-heavy, i.e., many more storage locations lower in the supply chain, (2) seven with relatively more storage locations in both top and lower levels, and (3) nine comparatively more top-heavy] which do not correlate closely with any of the country characteristics considered. For all three cluster types, our HERMES modeling found that simplified systems (a central location shipping directly to immunization locations with a limited number of Hubs in between) resulted in lower operating costs. A standard four-tier design template may have been followed for most countries and raises the possibility that simpler and more tailored designs may be warranted. Copyright © 2015 Elsevier Ltd. All rights reserved.

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains.

PubMed

Lautala, Pasi T; Hilliard, Michael R; Webb, Erin; Busch, Ingrid; Richard Hess, J; Roni, Mohammad S; Hilbert, Jorge; Handler, Robert M; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli

2015-12-01

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. The paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Finally gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains

NASA Astrophysics Data System (ADS)

Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; Busch, Ingrid; Richard Hess, J.; Roni, Mohammad S.; Hilbert, Jorge; Handler, Robert M.; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli

2015-12-01

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term `supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. The paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Finally gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.

Cost evaluation of cellulase enzyme for industrial-scale cellulosic ethanol production based on rigorous Aspen Plus modeling.

PubMed

Liu, Gang; Zhang, Jian; Bao, Jie

2016-01-01

Cost reduction on cellulase enzyme usage has been the central effort in the commercialization of fuel ethanol production from lignocellulose biomass. Therefore, establishing an accurate evaluation method on cellulase enzyme cost is crucially important to support the health development of the future biorefinery industry. Currently, the cellulase cost evaluation methods were complicated and various controversial or even conflict results were presented. To give a reliable evaluation on this important topic, a rigorous analysis based on the Aspen Plus flowsheet simulation in the commercial scale ethanol plant was proposed in this study. The minimum ethanol selling price (MESP) was used as the indicator to show the impacts of varying enzyme supply modes, enzyme prices, process parameters, as well as enzyme loading on the enzyme cost. The results reveal that the enzyme cost drives the cellulosic ethanol price below the minimum profit point when the enzyme is purchased from the current industrial enzyme market. An innovative production of cellulase enzyme such as on-site enzyme production should be explored and tested in the industrial scale to yield an economically sound enzyme supply for the future cellulosic ethanol production.

48 CFR 239.7306 - Solicitation provision and contract clause.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TECHNOLOGY Requirements for Information Relating to Supply Chain Risk 239.7306 Solicitation provision and contract clause. (a) Insert the provision at 252.239-7017, Notice of Supply Chain Risk, in all... as a supply. (b) Insert the clause at 252.239-7018, Supply Chain Risk, in all solicitations and...

Developing a model for agile supply: an empirical study from Iranian pharmaceutical supply chain.

PubMed

Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

2013-01-01

Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API.

Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

PubMed Central

Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

2013-01-01

Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

Supplier Development: A Long-Term Supportability Option For USAF Engines

DTIC Science & Technology

2012-02-01

Supply Chain Management Practices..................8 AF and DoD Regulations "Limitation or Hoax" Can USAF Develop Suppliers...integrated supply chain management (SCM) process providing engines and parts, aiding in the ability of the depots to meet the warfighter‟s needs. The... supply chain has struggled in the past to support the warfighter with enough engines to accomplish the mission. The engine supply chain management

An Analysis of United States Marine Corps Enlisted Entry-Level Training Using Supply Chain and Operations Management

DTIC Science & Technology

2010-12-01

An Analysis of United States Marine Corps Enlisted Entry-Level Training Using Supply Chain and Operations Management ______________________________________ By...Report 4. TITLE AND SUBTITLE: An Analysis of United States Marine Corps Enlisted Entry-Level Training Using Supply Chain and Operations Management 6...Level Training; United States Marine Corps; Operations Management ; Supply Chain Management; Process Analysis 16. PRICE CODE 17. SECURITY

Materials Flow through Industry Supply Chain Modeling Tool | Advanced

Science.gov Websites

efficiency. It also performs supply chain scale analyses to quantify the impacts and benefits of next , read Evaluating opportunities to improve material and energy impacts in commodity supply chains

Antiretroviral procurement and supply chain management.

PubMed

Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

2014-01-01

Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

Knowledge management system for risk mitigation in supply chain uncertainty: case from automotive battery supply chain

NASA Astrophysics Data System (ADS)

Marie, I. A.; Sugiarto, D.; Surjasa, D.; Witonohadi, A.

2018-01-01

Automotive battery supply chain include battery manufacturer, sulphuric acid suppliers, polypropylene suppliers, lead suppliers, transportation service providers, warehouses, retailers and even customers. Due to the increasingly dynamic condition of the environment, supply chain actors were required to improve their ability to overcome various uncertainty issues in the environment. This paper aims to describe the process of designing a knowledge management system for risk mitigation in supply chain uncertainty. The design methodology began with the identification of the knowledge needed to solve the problems associated with uncertainty and analysis of system requirements. The design of the knowledge management system was described in the form of a data flow diagram. The results of the study indicated that key knowledge area that needs to be managed were the knowledge to maintain the stability of process in sulphuric acid process and knowledge to overcome the wastes in battery manufacturing process. The system was expected to be a media acquisition, dissemination and storage of knowledge associated with the uncertainty in the battery supply chain and increase the supply chain performance.

Electric vehicle (EV) storage supply chain risk and the energy market: A micro and macroeconomic risk management approach

NASA Astrophysics Data System (ADS)

Aguilar, Susanna D.

As a cost effective storage technology for renewable energy sources, Electric Vehicles can be integrated into energy grids. Integration must be optimized to ascertain that renewable energy is available through storage when demand exists so that cost of electricity is minimized. Optimization models can address economic risks associated with the EV supply chain- particularly the volatility in availability and cost of critical materials used in the manufacturing of EV motors and batteries. Supply chain risk can reflect itself in a shortage of storage, which can increase the price of electricity. We propose a micro-and macroeconomic framework for managing supply chain risk through utilization of a cost optimization model in combination with risk management strategies at the microeconomic and macroeconomic level. The study demonstrates how risk from the EVs vehicle critical material supply chain affects manufacturers, smart grid performance, and energy markets qualitatively and quantitatively. Our results illustrate how risk in the EV supply chain affects EV availability and the cost of ancillary services, and how EV critical material supply chain risk can be mitigated through managerial strategies and policy.

Closed loop supply chain network design with fuzzy tactical decisions

NASA Astrophysics Data System (ADS)

Sherafati, Mahtab; Bashiri, Mahdi

2016-09-01

One of the most strategic and the most significant decisions in supply chain management is reconfiguration of the structure and design of the supply chain network. In this paper, a closed loop supply chain network design model is presented to select the best tactical and strategic decision levels simultaneously considering the appropriate transportation mode in activated links. The strategic decisions are made for a long term; thus, it is more satisfactory and more appropriate when the decision variables are considered uncertain and fuzzy, because it is more flexible and near to the real world. This paper is the first research which considers fuzzy decision variables in the supply chain network design model. Moreover, in this study a new fuzzy optimization approach is proposed to solve a supply chain network design problem with fuzzy tactical decision variables. Finally, the proposed approach and model are verified using several numerical examples. The comparison of the results with other existing approaches confirms efficiency of the proposed approach. Moreover the results confirms that by considering the vagueness of tactical decisions some properties of the supply chain network will be improved.

Framework for resilience in material supply chains, with a case study from the 2010 Rare Earth Crisis.

PubMed

Sprecher, Benjamin; Daigo, Ichiro; Murakami, Shinsuke; Kleijn, Rene; Vos, Matthijs; Kramer, Gert Jan

2015-06-02

In 2010, Chinese export restrictions caused the price of the rare earth element neodymium to increase by a factor of 10, only to return to almost normal levels in the following months. This despite the fact that the restrictions were not lifted. The significant price peak shows that this material supply chain was only weakly resistant to a major supply disruption. However, the fact that prices rapidly returned to lower levels implies a certain resilience. With the help of a novel approach, based on resilience theory combined with a material flow analysis (MFA) based representation of the neodymium magnet (NdFeB) supply chain, we show that supply chain resilience is composed of various mechanisms, including (a) resistance, (b) rapidity, and (c) flexibility, that originate from different parts of the supply chain. We make recommendations to improve the capacity of the NdFeB system to deal with future disruptions and discuss potential generalities for the resilience of other material supply chains.

Low carbon logistics through supply chain design and coordination.

DOT National Transportation Integrated Search

2010-02-01

"In this project, we propose to address carbon emissions in logistics through supply chain design, planning and : coordination. We argue that (1) supply chain design, planning, and coordination can help reduce carbon emissions : significantly, (2) su...

What is Climate Leadership: Examples and Lessons Learned in Supply Chain Management Webinar

EPA Pesticide Factsheets

Organizations that have developed comprehensive greenhouse gas inventories and aggressive emissions reduction goals discuss their strategies for managing greenhouse gases in their organizational supply chains and use of EPA Supply Chain resources.

Short Term Cyber Attacks with Long Term Effects and Degradation of Supply Chain Capability

DTIC Science & Technology

2016-09-01

Artificial Intelligence Research Society Conference, 271–275, St. Augustine: Florida. Goetschalckx, Marc. 2011. Supply Chain Engineering. New York: Springer...term risks in a network supply chain to establish the existence of black swan events. 14. SUBJECT TERMS cybersecurity , supply chain risk...Mission, and Information System View (NIST SP 800–39) .....50 6. Cybersecurity Instruction for the DOD (DODI 8500.01) .........51 7. Risk Management

Supply chain management: new paradigms for customers and suppliers.

PubMed

Garwood, D

1999-02-01

Companies are constantly looking for ways to increase their effectiveness and improve their bottom lines. One area of renewed interest is supply chain management. By managing their supply chains better, companies are able to become more flexible, offer defect-free products, eliminate unnecessary delays, and keep costs down. This article briefly describes the objectives of supply chain management and lists some of the tools that can be used to achieve them.

An exploration in mineral supply chain mapping using tantalum as an example

USGS Publications Warehouse

Soto-Viruet, Yadira; Menzie, W. David; Papp, John F.; Yager, Thomas R.

2013-01-01

This report uses the supply chain of tantalum (Ta) to investigate the complexity of mineral and metal supply chains in general and show how they can be mapped. A supply chain is made up of all the manufacturers, suppliers, information networks, and so forth, that provide the materials and parts that go into making up a final product. The mineral portion of the supply chain begins with mineral material in the ground (the ore deposit); extends through a series of processes that include mining, beneficiation, processing (smelting and refining), semimanufacture, and manufacture; and continues through transformation of the mineral ore into concentrates, refined mineral commodities, intermediate forms (such as metals and alloys), component parts, and, finally, complex products. This study analyses the supply chain of tantalum beginning with minerals in the ground to many of the final goods that contain tantalum.

Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns

PubMed Central

Du, Bisheng; Liu, Qing; Li, Guiping

2017-01-01

Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development. PMID:29117150

Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns.

PubMed

Du, Bisheng; Liu, Qing; Li, Guiping

2017-11-08

Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development.

Stakeholders Integration in Higher Education: Supply Chain Approach

ERIC Educational Resources Information Center

Al-Turki, U. M.; Duffuaa, S.; Ayar, T.; Demirel, O.

2008-01-01

Supply chain management principles have emerged in the last decade as a strategic option to meet new challenges in global business environment. Viewing business environment as part of a chain, starting from raw material suppliers to end customers passing by producers, is at the heart of supply-chain management. Many management principles have…

77 FR 17001 - USDA Public Stakeholder Meeting: Match Making in the Biofuels Value Chain

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... to improve awareness and increase understanding of the biofuels supply chain links between all those.... At this meeting, federal officials will provide a short profile of each section of the supply chain... that outline their experiences in that respective supply chain sector, barriers and lessons learned...

The Supply Chain's Role in Improving Animal Welfare.

PubMed

Harvey, David; Hubbard, Carmen

2013-08-14

Supply chains are already incorporating citizen/consumer demands for improved animal welfare, especially through product differentiation and the associated segmentation of markets. Nonetheless, the ability of the chain to deliver high(er) levels and standards of animal welfare is subject to two critical conditions: (a) the innovative and adaptive capacity of the chain to respond to society's demands; (b) the extent to which consumers actually purchase animal-friendly products. Despite a substantial literature reporting estimates of willingness to pay (WTP) for animal welfare, there is a belief that in practice people vote for substantially more and better animal welfare as citizens than they are willing to pay for as consumers. This citizen-consumer gap has significant consequences on the supply chain, although there is limited literature on the capacity and willingness of supply chains to deliver what the consumer wants and is willing to pay for. This paper outlines an economic analysis of supply chain delivery of improved standards for farm animal welfare in the EU and illustrates the possible consequences of improving animal welfare standards for the supply chain using a prototype belief network analysis.

[The study of medical supplies automation replenishment algorithm in hospital on medical supplies supplying chain].

PubMed

Sheng, Xi

2012-07-01

The thesis aims to study the automation replenishment algorithm in hospital on medical supplies supplying chain. The mathematical model and algorithm of medical supplies automation replenishment are designed through referring to practical data form hospital on the basis of applying inventory theory, greedy algorithm and partition algorithm. The automation replenishment algorithm is proved to realize automatic calculation of the medical supplies distribution amount and optimize medical supplies distribution scheme. A conclusion could be arrived that the model and algorithm of inventory theory, if applied in medical supplies circulation field, could provide theoretical and technological support for realizing medical supplies automation replenishment of hospital on medical supplies supplying chain.

Contraception supply chain challenges: a review of evidence from low- and middle-income countries.

PubMed

Mukasa, Bakali; Ali, Moazzam; Farron, Madeline; Van de Weerdt, Renee

2017-10-01

To identify and assess factors determining the functioning of supply chain systems for modern contraception in low- and middle-income countries (LMICs), and to identify challenges contributing to contraception stockouts that may lead to unmet need. Scientific databases and grey literature were searched including Database of Abstracts of Reviews of Effectiveness (DARE), PubMed, MEDLINE, POPLINE, CINAHL, Academic Search Complete, Science Direct, Web of Science, Cochrane Central, Google Scholar, WHO databases and websites of key international organisations. Studies indicated that supply chain system inefficiencies significantly affect availability of modern FP and contraception commodities in LMICs, especially in rural public facilities where distribution barriers may be acute. Supply chain failures or bottlenecks may be attributed to: weak and poorly institutionalized logistic management information systems (LMIS), poor physical infrastructures in LMICs, lack of trained and dedicated staff for supply chain management, inadequate funding, and rigid government policies on task sharing. However, there is evidence that implementing effective LMISs and involving public and private providers will distribution channels resulted in reduction in medical commodities' stockout rates. Supply chain bottlenecks contribute significantly to persistent high stockout rates for modern contraceptives in LMICs. Interventions aimed at enhancing uptake of contraceptives to reduce the problem of unmet need in LMICs should make strong commitments towards strengthening these countries' health commodities supply chain management systems. Current evidence is limited and additional, and well-designed implementation research on contraception supply chain systems is warranted to gain further understanding and insights on the determinants of supply chain bottlenecks and their impact on stockouts of contraception commodities.

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmostmore » importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. Our paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Lastly, gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.« less

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains

DOE PAGES

Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; ...

2015-06-30

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmostmore » importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. Our paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Lastly, gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.« less

Center for Corporate Climate Leadership Success Stories: Case Studies in Supply Chain Engagement

EPA Pesticide Factsheets

The case studies on this page provide successful examples of companies engaging with their supply chains to reduce their greenhouse gas emissions, understand their shifting supply chain risks, and take advantage of market opportunities.

Involvement of polyubiquitin chains via specific chain linkages in stress response in mammalian cells.

PubMed

Fujimuro, Masahiro; Nishiya, Tadashi; Nomura, Yasuyuki; Yokosawa, Hideyoshi

2005-12-01

Polyubiquitination plays key roles in various proteasome-dependent and independent cellular events. To elucidate roles in stress response of polyubiquitin chains formed via specific chain linkages in mammalian cells, we established NIH3T3 stable cell lines that are capable of conditionally expressing K29R, K48R and K63R ubiquitin mutants, in which the Lys29, Lys48 and Lys63 residues of ubiquitin had been changed to Arg, and we examined the effects of various stresses on their cell viabilities. The expression of K63R ubiquitin mutant decreased viability of the cells post-exposed to ethanol, H(2)O(2) and methyl methanesulfonate (MMS), while that of K48R mutant decreased viability of the cells post-exposed to heat shock as well as ethanol, H(2)O(2) and MMS. Thus, these results suggest that polyubiquitin chains formed via specific chain linkages are involved in the respective stress responses in mammalian cells.

Information technology and supply chain management: a study of the food industry.

PubMed

Hill, C A

2000-08-01

This paper's topic is the use of information technology (IT) for the development of supply chain management (SCM). In today's business environment, both in academics and industry, the term SCM has become a popular paradigm. In particular, the use of IT to facilitate the development of supply chain partners is gaining interest within industry. This paper develops the topic of SCM and further develops the relationship between the use of IT, in the form of electronic data interchange, and the development of supply chain integration. The goal of using SCM along with IT is to develop a supply chain that is capable of responding more quickly and efficiently in the meeting of consumer's requirements.

The application of supply chain management principles to emergency management logistics: An empirical study.

PubMed

Peterson, Matthew R; Young, Richard R; Gordon, Gary A

2016-01-01

Key elements of supply chain theory remain relevant to emergency management (EM) logistics activities. The Supply Chain Operations Reference model can also serve as a useful template for the planning, organizing, and execution of EM logistics. Through a series of case studies (developed through intensive survey of organizations and individuals responsible for EM), the authors identified the extent supply chain theory is being adopted and whether the theory was useful for emergency logistics managers. The authors found several drivers that influence the likelihood of an organization to implement elements of supply chain management: the frequency of events, organizational resources, population density, range of events, and severity of the disaster or emergency.

Disconnection: the user voice within the wound dressing supply chain.

PubMed

Campling, Natasha; Grocott, Patricia; Cowley, Sarah

2008-03-01

This study examined the user voice in England's National Health Service (NHS) wound dressing supply chain. The impetus for this work came from involvement in a collaboration between industry and clinicians, entitled Woundcare Research for Appropriate Products. Experiences from that study highlighted the notable absence of research about the impact of the supply chain on the users of dressings. Interview data are presented following an outline of the grounded theory method used. These data were obtained from key stakeholders (n = 41) within the wound dressing supply chain such as nurses, manufacturers, distributors, professional organizations, government organizations and user groups. The consequences of supply disconnection revealed haphazard supply, unmet user needs and lack of information transfer between player groups. These consequences explain the lack of user voice in the supply chain and have far-reaching implications for nursing management, through purchasing decisions and nurses' management of wound care.

Defining a Closed-Loop U.S. Aluminum Can Supply Chain Through Technical Design and Supply Chain Innovation

NASA Astrophysics Data System (ADS)

Buffington, Jack; Peterson, Ray

2013-08-01

The purpose of this study is to conduct a supply chain material flow analysis (MFA) for the U.S. aluminum can market, consistent with studies conducted for the overall worldwide aluminum industry. A technical definition of the use of alloys 5182 and 3104 is conducted by metallurgists for use in the "aluminum can" MFA. Four propositions are created: technical, economic, and supply chain factors are as important to secondary aluminum recycling in an aluminum can as higher recycling rates (P1); the development of a unialloy aluminum can will increase reuse rates, but recycling rates must increase for this to happen (P2); a closed-loop aluminum can supply chain is not able to be fully realized in today's environment but is very useful for understanding improvement through both supply and demand (P3); and UBC supply can improve through a "voluntary deposit-refund system" approach (P4).

System redesign of the immunization supply chain: Experiences from Benin and Mozambique.

PubMed

Prosser, Wendy; Jaillard, Philippe; Assy, Emmanuelle; Brown, Shawn T; Matsinhe, Graça; Dekoun, Mawutondji; Lee, Bruce Y

2017-04-19

Evidence suggests that immunization supply chains are becoming outdated and unable to deliver needed vaccines due to growing populations and new vaccine introductions. Redesigning a supply chain could result in meeting current demands. The Ministries of Health in Benin in Mozambique recognized known barriers to the immunization supply chain and undertook a system redesign to address those barriers. Changes were made to introduce an informed push system while consolidating storage points, introducing transport loops, and increasing human resource capacity for distribution. Evaluations were completed in each country. Evaluation in each country indicated improved performance of the supply chain. The Effective Vaccine Management (EVM) assessment in Benin documented notable improvements in the distribution criteria of the tool, increasing from 40% to 100% at the district level. In Mozambique, results showed reduced stockouts at health facility level from 79% at baseline to less than 1% at endline. Coverage rates of DTP3 also increased from 68.9% to 92.8%. Benin and Mozambique are undertaking system redesign in order to respond to constraints identified in the vaccine supply chain. Results and learnings show improvements in supply chain performance and make a strong case for system redesign. These countries demonstrate the feasibility of system redesign for other countries considering how to address outdated supply chains. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

The evolving role of supply chain management technology in healthcare.

PubMed

Langabeer, Jim

2005-01-01

The healthcare supply chain is a vast, disintegrated network of products and players, loosely held together by manual and people-intensive processes. Managing the flow of information, supplies, equipment, and services from manufacturers to distributors to providers of care is especially difficult in clinical supply chains, compared with more technology-intense industries like consumer goods or industrial manufacturing. As supplies move downstream towards hospitals and clinics, the quality and robustness of accompanying management and information systems used to manage these products deteriorates significantly. Technology that provides advanced planning, synchronization, and collaboration upstream at the large supply manufacturers and distributors rarely is used at even the world's larger and more sophisticated hospitals. This article outlines the current state of healthcare supply chain management technologies, addresses potential reasons for the lack of adoption of technologies and provides a roadmap for the evolution of technology for the future. This piece is based on both quantitative and qualitative research assessments of the healthcare supply chain conducted during the last two years.

An integrated supply chain model for new products with imprecise production and supply under scenario dependent fuzzy random demand

NASA Astrophysics Data System (ADS)

Nagar, Lokesh; Dutta, Pankaj; Jain, Karuna

2014-05-01

In the present day business scenario, instant changes in market demand, different source of materials and manufacturing technologies force many companies to change their supply chain planning in order to tackle the real-world uncertainty. The purpose of this paper is to develop a multi-objective two-stage stochastic programming supply chain model that incorporates imprecise production rate and supplier capacity under scenario dependent fuzzy random demand associated with new product supply chains. The objectives are to maximise the supply chain profit, achieve desired service level and minimise financial risk. The proposed model allows simultaneous determination of optimum supply chain design, procurement and production quantities across the different plants, and trade-offs between inventory and transportation modes for both inbound and outbound logistics. Analogous to chance constraints, we have used the possibility measure to quantify the demand uncertainties and the model is solved using fuzzy linear programming approach. An illustration is presented to demonstrate the effectiveness of the proposed model. Sensitivity analysis is performed for maximisation of the supply chain profit with respect to different confidence level of service, risk and possibility measure. It is found that when one considers the service level and risk as robustness measure the variability in profit reduces.

Modeling and Implementation of Cattle/Beef Supply Chain Traceability Using a Distributed RFID-Based Framework in China.

PubMed

Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei

2015-01-01

In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain.

Risk management abilities in multimodal maritime supply chains: Visibility and control perspectives.

PubMed

Vilko, Jyri; Ritala, Paavo; Hallikas, Jukka

2016-11-29

Supply chain complexity and disintegration lead to increased uncertainty from a stakeholders' perspective, which is emerging as one of the major challenges of risk management. The ability to identify risks has weakened, as the responsibility of supply chain risk management is handed over to outside service providers. Regardless, the risks, their visibility and their impact depend on the position of the companies in the supply chain. The actors in the chain must therefore collaborate to create effective risk management conditions. This challenging situation is especially pronounced in multimodal maritime supply chains, where the risks and actor focality are high. This paper contributes to current risk management literature by providing a holistic and systemic view of risk visibility and control in maritime supply chains. The study employs broad-based, qualitative interview data collected from actors operating in southern Finland and the Gulf of Finland as well as an expert-panel assessment of the related risk management abilities. The results show a high level of variance in the level of risk identification and visibility between the actors in question. This further suggests that collaboration in supply chain risk management is essential, as an awareness of the risks and their control mechanisms do not necessarily reside in the same company. Copyright © 2016 Elsevier Ltd. All rights reserved.

Modeling and Implementation of Cattle/Beef Supply Chain Traceability Using a Distributed RFID-Based Framework in China

PubMed Central

Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei

2015-01-01

In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain. PMID:26431340

Supply chain management of health commodities for reducing global disease burden.

PubMed

Chukwu, Otuto Amarauche; Ezeanochikwa, Valentine Nnaemeka; Eya, Benedict Ejikeme

Reducing global disease burden requires improving access to medicines, thus the need for efficient and effective supply chain management for medicines. The Nigerian government came up with new policies on Mega Drug Distribution Centres and National Drug Distribution Guidelines to improve access to quality medicines with pharmacists having a key role to play. However, pharmacists in Nigeria seem not to be aware and adequately equipped to handle the medicines supply chain. This article aimed at assessing the awareness and readiness of Nigerian pharmacists on supply chain management practices for improving access to medicines. Pharmacists in Nigeria's Capital were randomly sampled. Semi-structured questionnaires were administered. Descriptive statistics was used in data analysis. P values less than 0.05 were considered to be significant. 29.3%, 20.7% and 53.7% were not aware of supply chain management, National Drug Distribution Guidelines and Mega Drug Distribution Centres, respectively. 85.46% do not have a copy of the National Drug Distribution Guidelines. 78% were not aware that Mega Drug Distribution Centres are already operational. 35.4% have never been involved in any supply chain management practice. 69.5% often experience stock out of vital and essential medicines, of which 85.2% were in hospitals. 15.9% were successful in managing their facility's supply chains. 84.1% opined that pharmacists in Nigeria are not yet ready to handle the medicines supply chain. Findings showed limited awareness and readiness on supply chain management of medicines. This may be due to inadequate supply chain management skills and infrastructure, poor financing, lack of accountability and poor management. Tackling these as well as pharmacists showing more interest in the country's health policies and obtaining necessary postgraduate certifications will lead to improvements. This will improve access to quality medicines and thus help in the fight to reduce disease burden both locally and globally. Copyright © 2016 Elsevier Inc. All rights reserved.

The Mitochondria-targeted ubiquinone MitoQ decreases ethanol-dependent micro and macro hepatosteatosis

PubMed Central

Chacko, Balu K; Srivastava, Anup; Johnson, Michelle; Benavides, Gloria A.; Chang, Mi Jung; Ye, Yaozu; Jhala, Nirag; Murphy, Michael P; Kalyanaraman, Balaraman; Darley-Usmar, Victor M.

2011-01-01

Chronic alcohol-induced liver disease results in inflammation, steatosis and increased oxidative and nitrosative damage to the mitochondrion. We hypothesized that targeting an antioxidant to the mitochondria would prevent oxidative damage and attenuate the steatosis associated with alcoholic liver disease. To test this we investigated the effects of mitochondria-targeted ubiquinone, MitoQ, (5 & 25 mg/kg/d for 4 weeks) in male Sprague-Dawley rats consuming ethanol using the Lieber-DeCarli diet with pair-fed controls. Hepatic steatosis, 3-nitrotyosine (3-NT), 4-hydroxynonenal (4-HNE), hypoxia inducible factor α (HIF1α) and the activity of the mitochondrial respiratory chain complexes were assessed. As reported previously, ethanol consumption resulted in hepatocyte ballooning, increased lipid accumulation in the form of micro and macrovesicular steatosis and induction of CYP2E1. MitoQ had a minor on the ethanol-dependent decrease in mitochondrial respiratory chain proteins and their activities, it did however decrease hepatic steatosis in ethanol consuming animals and prevented the ethanol-induced formation of 3-NT and 4-HNE. Interestingly, MitoQ completely blocks the increase in HIF1α in all ethanol-fed groups which has previously been demonstrated in cell culture models and shown to be essential in ethanol-dependent hepatosteatosis. These results demonstrate the antioxidant capacity of MitoQ in alleviating alcohol associated mitochondrial ROS and several downstream effects of ROS/RNS production such as inhibiting protein nitration and protein aldehyde formation and specifically ROS-dependant HIF1α stabilization. PMID:21520201

A fuzzy MICMAC analysis for improving supply chain performance of basic vaccines in developing countries.

PubMed

Chandra, Dheeraj; Kumar, Dinesh

2018-03-01

In recent years, demand to improve child immunization coverage globally, and the development of the latest vaccines and technology has made the vaccine market very complex. The rise in such complexities often gives birth to numerous issues in the vaccine supply chain, which are the primary cause of its poor performance. Figuring out the cause of the performance problem can help you decide how to address it. The goal of the present study is to identify and analyze important issues in the supply chain of basic vaccines required for child immunization in the developing countries. Twenty-five key issues as various factors of the vaccine supply chain have been presented in this paper. Fuzzy MICMAC analysis has been carried out to classify the factors based on their driving and dependence power and to develop a hierarchy based model. Further, the findings have been discussed with the field experts to identify the critical factors. Three factors: better demand forecast, communication between the supply chain members, and proper planning and scheduling have been identified as the critical factors of vaccine supply chain. These factors should be given special care to improve vaccine supply chain performance.

Profit Analysis Model of Smart Item Implementation in Integrated Supply Chain Process

NASA Astrophysics Data System (ADS)

Tritularsih, Yustina; Rinanto, Andhy; Prasetyo, Hoedi; Nur Rosyidi, Cucuk

2018-03-01

Nowadays all links of the entire supply chain need to integrate their different infrastructures and they have better control of them to drive better profits. This integration should offer the ability for companies in order to have an overall and transparent insight to its supply chain activities. An intelligent supply chain which is mainly supported by Smart Items technology can satisfy the need of those integration. By means of Smart Items, a company can benefit some advantages. Those are cost reduction and value creation. However, currently there is no comprehensive Smart Item infrastructure exists yet so it is difficult to calculate the true benefit information. This paper attempts to recommend a model for estimating the benefits of implementing Smart Items in a company which has an integrated supply chain process. The integrated supply chain means that three echelons (supplier, shipper and retailer) of supply chain are belonged to a company. The proposed model was used to determine the shrinkage value and RFID tag price which can give the maximum benefit of Smart Items implementation. A numerical example is also provided to give a better comprehension on model calculation.

Reinforcement learning in supply chains.

PubMed

Valluri, Annapurna; North, Michael J; Macal, Charles M

2009-10-01

Effective management of supply chains creates value and can strategically position companies. In practice, human beings have been found to be both surprisingly successful and disappointingly inept at managing supply chains. The related fields of cognitive psychology and artificial intelligence have postulated a variety of potential mechanisms to explain this behavior. One of the leading candidates is reinforcement learning. This paper applies agent-based modeling to investigate the comparative behavioral consequences of three simple reinforcement learning algorithms in a multi-stage supply chain. For the first time, our findings show that the specific algorithm that is employed can have dramatic effects on the results obtained. Reinforcement learning is found to be valuable in multi-stage supply chains with several learning agents, as independent agents can learn to coordinate their behavior. However, learning in multi-stage supply chains using these postulated approaches from cognitive psychology and artificial intelligence take extremely long time periods to achieve stability which raises questions about their ability to explain behavior in real supply chains. The fact that it takes thousands of periods for agents to learn in this simple multi-agent setting provides new evidence that real world decision makers are unlikely to be using strict reinforcement learning in practice.

Supply chain analysis of e-tailing versus retailing operation - a case study

NASA Astrophysics Data System (ADS)

Kumar, Sameer; Tiffany, Maryellen; Vaidya, Salil

2016-07-01

The swift growth of e-commerce or e-tailing as a consumer retail channel has made it a serious competitor to traditional retail channels and is changing consumers' purchasing behaviour. The purpose of this case study, based on Target and Amazon.com, is to analyse the attributes of traditional retailing, e-tailing, and hybrid supply chain models to form conclusions about the feasibility of an idealised supply chain model for the future. An integrated and generalised modelling framework is used that incorporates Six Sigma - define, measure, analyse, improve, control methodology leveraging various tools, including process flow maps, cause and effect diagram, performance efficiency metrics, failure mode and effects analysis (FMEA), and Monte Carlo simulation. Based on this analysis and research, the conclusion is that the idealised supply chain of the future may evolve into a hybrid supply chain, which includes both e-tail and retail channels. The main recommendations from this study include assessing the risks of migrating to such a hybrid supply chain and to leverage the recommended actions provided in the hybrid FMEA. To facilitate more effective and mature processes, this study can guide researchers in exhaustive empirical evaluations of hybrid supply chains, gather experiences and lessons learned for practitioners.

Biofuel Supply Chains: Impacts, Indicators and Sustainability Metrics

EPA Science Inventory

The U.S. EPA’s Office of Research and Development has introduced a program to study the environmental impacts and sustainability of biofuel supply chains. Analyses will provide indicators and metrics for valuating sustainability. In this context, indicators are supply chain rat...

U.S. healthcare fix: leveraging the lessons from the food supply chain.

PubMed

Kumar, Sameer; Blair, John T

2013-01-01

U.S. healthcare costs consistently outpace inflation, causing growing problems of affordability. This trend cannot be sustained indefinitely. The purpose of this study is to use supply-chain tools for macro-level examination of the U.S. healthcare as a business system and identify options and best use practices. We compare the important and successful U.S. food industry to the essential but problematic U.S. healthcare industry. Supply chain strategies leading to food business operations success are examined and healthcare applications suggested. We emphasize "total cost of ownership" which includes all costs incurred by all stakeholders of U.S. healthcare, including maintenance and cleanup, not just the initial purchase price. U.S. hospitals and clinics can use supply chain strategies in a total cost of ownership framework to reduce healthcare costs while maintaining patient care quality. Supply chain strategies of resource pooling, mass customization, centralized logistics, specialization, postponement and continuous improvement that have been successfully used in the U.S. food industry should be more widely applied to the U.S. healthcare industry. New and growing areas of telemedicine and medical tourism should be included in the supply chain analysis of U.S. healthcare. Valid statistical analysis of results in all areas of U.S. healthcare is an important part of the process. U.S. healthcare industry problems are systematic operational and supply chain problems rather than problems with workforce or technology. Examination of the U.S. healthcare industry through a supply chain framework should lead to significant operational improvement in both prevention and treatment of acute and chronic ailments. A rational and unemotional reorganization of the U.S. healthcare system operations, using supply chain strategies, should help reduce healthcare costs while maintaining quality and increasing accessibility.

Making Supply Chains Resilient to Floods Using a Bayesian Network

NASA Astrophysics Data System (ADS)

Haraguchi, M.

2015-12-01

Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and volume), and data from previous experiences (i.e. companies' risk mitigation strategy decisions).

Applying Adaptive Agricultural Management & Industrial Ecology Principles to Produce Lower- Carbon Ethanol from California Energy Beets

NASA Astrophysics Data System (ADS)

Alexiades, Anthy Maria

The life cycle assessment of a proposed beet-to-ethanol pathway demonstrates how agricultural management and industrial ecology principles can be applied to reduce greenhouse gas emissions, minimize agrochemical inputs and waste, provide ecosystem services and yield a lower-carbon fuel from a highly land-use efficient, first-generation feedstock cultivated in California. Beets grown in California have unique potential as a biofuel feedstock. A mature agricultural product with well-developed supply chains, beet-sugar production in California has contracted over recent decades, leaving idle production capacity and forcing growers to seek other crops for use in rotation or find a new market for beets. California's Low Carbon Fuel Standard (LCFS) faces risk of steeply-rising compliance costs, as greenhouse gas reduction targets in the transportation sector were established assuming commercial volumes of lower-carbon fuels from second-generation feedstocks -- such as residues, waste, algae and cellulosic crops -- would be available by 2020. The expected shortfall of cellulosic ethanol has created an immediate need to develop lower-carbon fuels from readily available feedstocks using conventional conversion technologies. The life cycle carbon intensity of this ethanol pathway is less than 28 gCO2e/MJEthanol: a 72% reduction compared to gasoline and 19% lower than the most efficient corn ethanol pathway (34 gCO2e/MJ not including indirect land use change) approved under LCFS. The system relies primarily on waste-to-energy resources; nearly 18 gCO2e/MJ are avoided by using renewable heat and power generated from anaerobic digestion of fermentation stillage and gasification of orchard residues to meet 88% of the facility's steam demand. Co-products displace 2 gCO2e/MJ. Beet cultivation is the largest source of emissions, contributing 15 gCO 2e/MJ. The goal of the study is to explore opportunities to minimize carbon intensity of beet-ethanol and investigate the potential contribution of this pathway toward meeting the near-term objectives of California's climate change policy.

Electrical Signatures of Ethanol-Liquid Mixtures: Implications for Monitoring Biofuels Migration in the Subsurface

EPA Science Inventory

Ethanol (EtOH), an emerging contaminant with potential direct and indirect environmental effects, poses threats to water supplies when spilled in large volumes. A series of experiments was directed at understanding the electrical geophysical signatures arising from groundwater co...

Integration of three echelon supply chain (supplier-manufacturer-distributor-drop shipper) with permissible delay in payment and penalty contract

NASA Astrophysics Data System (ADS)

Ibrahim, M. F.; Suparno

2018-04-01

Supply Chain Management (SCM) has to be considered in the company in order to improve the sustainability and competitiveness. SCM executed to integrating any companies on the supply chain in a way of coordinating the flow of goods, information, and financial. Permissible delay in payment is one of the coordination ways with allowing the costumers delay the payments to a vendor in some certain periods without any interest charges. In the supply chain system, drop-shipping player already familiar in this era. In drop-shipping internet retailing, the supplier will hold supplies and also carry out physical distribution service on behalf of drop-shipper. Drop-shipper will just focus on selling, on the other hand, their supplier will be responsible for the physical process. Generally, drop-shipper have information of the customer demands better than the distributor. But, it is also unrare when the drop-shipper send the estimation of demands which bigger than their own estimation in order to maximize their own interest, so they hope supplies of the distributor will always enough to accommodate their demands. Contributions in this research will be focused on integration of three echelons supply chain, which are the supplier, manufacturer, distributor, and drop-shipper. With considering delay in payment on first and second echelons, and also the contract penalty on third echelon. The problem on this research will be modeled in some kind of cases which can represent the problem of real supply chain system. Sensitivity analysis will be done on certain significant variables toward the changes of total supply chain cost. Coordination with delay in payment success to integrate supply chain. Contract penalty plan success to maintain the profit of distributor and drop-shipper.

75 FR 22412 - Food and Drug Administration/Xavier University Global Outsourcing Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... relationships and supply chain control, as well as expectations from global regulators. Pharmaceutical companies...; Quality Agreement Development throughout the product and process lifecycle; Supply Chain Transparency and Pedigree; How to Audit the Supply Chain; Rx-360 and International Pharmaceutical Excipients Council...

76 FR 10394 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group... Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group...

Supply Chain Interoperability Measurement

DTIC Science & Technology

2015-06-19

Supply Chain Interoperability Measurement DISSERTATION June 2015 Christos E. Chalyvidis, Major, Hellenic Air...ENS-DS-15-J-001 SUPPLY CHAIN INTEROPERABILITY MEASUREMENT DISSERTATION Presented to the Faculty Department of Operational Sciences...INTEROPERABILITY MEASUREMENT Christos E. Chalyvidis, BS, MSc. Major, Hellenic Air Force Committee Membership: Dr. A.W. Johnson Chair

Analysis of production-inventory decisions in a decentralized supply chain with price-dependent demand

NASA Astrophysics Data System (ADS)

Kurdhi, N. A.; Irsanianto, S. T.; Sutanto

2017-01-01

In this paper, we consider a production-inventory supply chain system with single-manufacturer and single-retailer. There are many types of contract that guarantee the supply chain. However, the administrative costs of the contract are usually neglected in real situation. The additional gain from integration may not cover the extra administrative costs may not addressed to supply chain. Therefore, a Stackelberg game and RFM policy are examined in order to investigate its performance on supply chain. The RFM policy is applied because its administrative costs are lower than othe policies. Although RFM policy is not capable of coordinating the channel, it leads to considerable improvements over the channel. The purpose of this research is to present a model of integrated policy, in which the goal is to maximize the whole system profit, and to evaluate decentralized-Stackelberg and RFM policies, in which individual firms in the supply chain have their own objectives and decisions to optimize.

B2B collaboration method through trust values for e-supply chain integrator: a case study of Malaysian construction industry

NASA Astrophysics Data System (ADS)

Ab. Aziz, Norshakirah; Ahmad, Rohiza; Dhanapal Durai, Dominic

2011-12-01

Limited trust, cooperation and communication have been identified as some of the issues that hinder collaboration among business partners. These one also true in the acceptance of e-supply chain integrator among organizations that involve in the same industry. On top of that, the huge number of components in supply chain industry also makes it impossible to include entire supply chain components in the integrator. Hence, this study intends to propose a method for identifying "trusted" collaborators for inclusion into an e-supply chain integrator. For the purpose of constructing and validating the method, the Malaysian construction industry is chosen as the case study due to its size and importance to the economy. This paper puts forward the background of the research, some relevant literatures which lead to trust values elements formulation, data collection from Malaysian Construction Supply Chain and a glimpse of the proposed method for trusted partner selection. Future work is also presented to highlight the next step of this research.

Managing risks in the fisheries supply chain using House of Risk Framework (HOR) and Interpretive Structural Modeling (ISM)

NASA Astrophysics Data System (ADS)

Nguyen, T. L. T.; Tran, T. T.; Huynh, T. P.; Ho, T. K. D.; Le, A. T.; Do, T. K. H.

2018-04-01

One of the sectors which contributes importantly to the development of Vietnam economy is fishery industry. However, during recent year, it has been witnessed many difficulties on managing the performance of the fishery supply chain operations as a whole. In this paper, a framework for supply chain risk management (SCRM) is proposed. Initially, all the activities are mapped by using Supply Chain Operations Reference (SCOR) model. Next, the risk ranking is analyzed in House of Risk. Furthermore, interpretive structural modeling (ISM) is used to identify inter-relationships among supply chain risks and to visualize the risks according to their levels. For illustration, the model has been tested in several case studies with fishery companies in Can Tho, Mekong Delta. This study identifies 22 risk events and 20 risk agents through the supply chain. Also, the risk priority could be used for further House of Risk with proactive actions in future studies.

Time-based analysis of the apheresis platelet supply chain in England.

PubMed

Wilding, R; Cotton, S; Dobbin, J; Chapman, J; Yates, N

2011-10-01

During 2009/2010 loss of platelets within NHS Blood and Transplant (NHSBT) due to time expiry was 9.3%. Hospitals remain reluctant to hold stocks of platelets due to the poor shelf life at issue. The purpose of this study was to identify areas for time compression in the apheresis platelet supply chain to extend the shelf life available for hospitals and reduce wastage in NHSBT. This was done within the context of NHSBT reconfiguring their supply chain and moving towards a consolidated and centralised approach. Time based process mapping was applied to identify value and non-value adding time in two manufacturing models. A large amount of the non-value adding time in the apheresis platelet supply chain is due to transportation and waiting for the next process in the manufacturing process to take place. Time based process mapping provides an effective 'lens' for supply chain professionals to identify opportunities for improvement in the platelet supply chain. © 2011 The Author(s). Vox Sanguinis © 2011 International Society of Blood Transfusion.

Managing Risk Aversion for Low-Carbon Supply Chains with Emission Abatement Outsourcing.

PubMed

Wang, Qinpeng; He, Longfei

2018-02-21

Reducing carbon emissions, including emission abatement outsourcing at the supply-chain level, is becoming a significant but challenging problem in practice. Confronting this challenge, we therefore break down the practice to focus on a low-carbon supply chain consisting of one supplier, one manufacturer and one third-party emission-reducing contractor. The contractor offers a carbon reduction service to the manufacturer. In view of the increasing proportion of Greenhouse Gases (GHG) emissions and absence of carbon reduction policies in developing countries, we adopt the prospect of consumers' low-carbon preferences to capture the demand sensitivity on carbon emission. By exploiting the Mean-Variance (MV) model, we develop a supply chain game model considering risk aversion. Comparing the supply chain performances of the cases under risk neutrality and risk aversion, we investigate the impact of the risk aversion of the supplier and the manufacturer on the low-carbon supply chain performances, respectively. We show that the risk aversion of chain members will not influence the relationship underlain by the profit-sharing contract between the manufacturer and contractor, whereas they may extend the supplier's concerning range. Although the manufacturer's risk aversion has a positive impact on the wholesale price, interestingly, the supplier's impact on the wholesale price is negative. Furthermore, we propose a contract to coordinate the risk-averse low-carbon supply chain by tuning the aversion levels of the supplier and the manufacturer, respectively. Through numerical study, we draw on managerial insights for industrial practitioners to adopt a low carbon strategy potentially by managing the risk attitudes along the supply chain channel.

Managing Risk Aversion for Low-Carbon Supply Chains with Emission Abatement Outsourcing

PubMed Central

Wang, Qinpeng; He, Longfei

2018-01-01

Reducing carbon emissions, including emission abatement outsourcing at the supply-chain level, is becoming a significant but challenging problem in practice. Confronting this challenge, we therefore break down the practice to focus on a low-carbon supply chain consisting of one supplier, one manufacturer and one third-party emission-reducing contractor. The contractor offers a carbon reduction service to the manufacturer. In view of the increasing proportion of Greenhouse Gases (GHG) emissions and absence of carbon reduction policies in developing countries, we adopt the prospect of consumers’ low-carbon preferences to capture the demand sensitivity on carbon emission. By exploiting the Mean-Variance (MV) model, we develop a supply chain game model considering risk aversion. Comparing the supply chain performances of the cases under risk neutrality and risk aversion, we investigate the impact of the risk aversion of the supplier and the manufacturer on the low-carbon supply chain performances, respectively. We show that the risk aversion of chain members will not influence the relationship underlain by the profit-sharing contract between the manufacturer and contractor, whereas they may extend the supplier’s concerning range. Although the manufacturer’s risk aversion has a positive impact on the wholesale price, interestingly, the supplier’s impact on the wholesale price is negative. Furthermore, we propose a contract to coordinate the risk-averse low-carbon supply chain by tuning the aversion levels of the supplier and the manufacturer, respectively. Through numerical study, we draw on managerial insights for industrial practitioners to adopt a low carbon strategy potentially by managing the risk attitudes along the supply chain channel. PMID:29466281

Medium-chain alkyl esters of tyrosol and hydroxytyrosol antioxidants by cuphea oil transesterification

USDA-ARS?s Scientific Manuscript database

Effective lipophilic antioxidants were readily prepared by non-aqueous enzymatic transesterification of plant phenols with cuphea oil. Tyrosol (2-(4-hydroxyphenyl)ethanol) and hydroxytyrosol (2-(3,4-dihydroxyphenyl)ethanol), abundantly available phenols from olive oil processing byproduct, were foun...

Future supply chains enabled by continuous processing--opportunities and challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Integrating biomass quality variability in stochastic supply chain modeling and optimization for large-scale biofuel production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castillo-Villar, Krystel K.; Eksioglu, Sandra; Taherkhorsandi, Milad

The production of biofuels using second-generation feedstocks has been recognized as an important alternative source of sustainable energy and its demand is expected to increase due to regulations such as the Renewable Fuel Standard. However, the pathway to biofuel industry maturity faces unique, unaddressed challenges. Here, to address this challenges, this article presents an optimization model which quantifies and controls the impact of biomass quality variability on supply chain related decisions and technology selection. We propose a two-stage stochastic programming model and associated efficient solution procedures for solving large-scale problems to (1) better represent the random nature of the biomassmore » quality (defined by moisture and ash contents) in supply chain modeling, and (2) assess the impact of these uncertainties on the supply chain design and planning. The proposed model is then applied to a case study in the state of Tennessee. Results show that high moisture and ash contents negatively impact the unit delivery cost since poor biomass quality requires the addition of quality control activities. Experimental results indicate that supply chain cost could increase as much as 27%–31% when biomass quality is poor. We assess the impact of the biomass quality on the topological supply chain. Our case study indicates that biomass quality impacts supply chain costs; thus, it is important to consider the impact of biomass quality in supply chain design and management decisions.« less

Performance measurement for supply chain management and evaluation criteria determination for reverse supply chain management

NASA Astrophysics Data System (ADS)

Kongar, N. Elif

2004-12-01

Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.

Integrating biomass quality variability in stochastic supply chain modeling and optimization for large-scale biofuel production

DOE PAGES

Castillo-Villar, Krystel K.; Eksioglu, Sandra; Taherkhorsandi, Milad

2017-02-20

The production of biofuels using second-generation feedstocks has been recognized as an important alternative source of sustainable energy and its demand is expected to increase due to regulations such as the Renewable Fuel Standard. However, the pathway to biofuel industry maturity faces unique, unaddressed challenges. Here, to address this challenges, this article presents an optimization model which quantifies and controls the impact of biomass quality variability on supply chain related decisions and technology selection. We propose a two-stage stochastic programming model and associated efficient solution procedures for solving large-scale problems to (1) better represent the random nature of the biomassmore » quality (defined by moisture and ash contents) in supply chain modeling, and (2) assess the impact of these uncertainties on the supply chain design and planning. The proposed model is then applied to a case study in the state of Tennessee. Results show that high moisture and ash contents negatively impact the unit delivery cost since poor biomass quality requires the addition of quality control activities. Experimental results indicate that supply chain cost could increase as much as 27%–31% when biomass quality is poor. We assess the impact of the biomass quality on the topological supply chain. Our case study indicates that biomass quality impacts supply chain costs; thus, it is important to consider the impact of biomass quality in supply chain design and management decisions.« less

Designing Energy Supply Chains with the P-graph Framework under Cost Constraints and Sustainability Considerations

EPA Science Inventory

A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...

Designing Energy Supply Chains with the P-Graph Framework under Cost Constraints andSustainability Considerations

EPA Science Inventory

A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...

75 FR 71457 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers From QFLEX... Division Technical Services America Global Parts Supply Chain Group Including Leased Workers From QFLEX... Enterprise Business Division Technical Services America Global Parts Supply Chain Group Including Leased...

76 FR 13662 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group... Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers... Supply Chain Group, including leased workers from QFlex, North America Logistics, and UPS, Palo Alto...

Optimizing the DoD Supply Chain for the Future Joint Force

DTIC Science & Technology

2013-05-01

4 Sunil Chopra and Peter Meindl, Supply Chain Management: Strategy, Planning, and Operation, 5th ed. (Boston: Pearson Education, Inc., 2013), 339...Arlington, VA: Lexington Institute, 2005. Chopra, Sunil and Peter Meindl. Supply Chain Management: Strategy, Planning, and Operation. 5th ed. Boston

Employer-Led Organizations and Skill Supply Chains: Linking Worker Advancement with the Skill Needs of Employers. Issue Brief.

ERIC Educational Resources Information Center

Mills, Jack; Prince, Heath

Skill supply chains apply a chain strategy to human resources to make the labor market more efficient. They link the multiple skill levels in a given labor market within a network of recruitment pathways for employers and advancement pathways for workers. Skill supply chains are based on employers' actual skill needs and on the principle that…

A quantile-based scenario analysis approach to biomass supply chain optimization under uncertainty

DOE PAGES

Zamar, David S.; Gopaluni, Bhushan; Sokhansanj, Shahab; ...

2016-11-21

Supply chain optimization for biomass-based power plants is an important research area due to greater emphasis on renewable power energy sources. Biomass supply chain design and operational planning models are often formulated and studied using deterministic mathematical models. While these models are beneficial for making decisions, their applicability to real world problems may be limited because they do not capture all the complexities in the supply chain, including uncertainties in the parameters. This study develops a statistically robust quantile-based approach for stochastic optimization under uncertainty, which builds upon scenario analysis. We apply and evaluate the performance of our approach tomore » address the problem of analyzing competing biomass supply chains subject to stochastic demand and supply. Finally, the proposed approach was found to outperform alternative methods in terms of computational efficiency and ability to meet the stochastic problem requirements.« less

A quantile-based scenario analysis approach to biomass supply chain optimization under uncertainty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zamar, David S.; Gopaluni, Bhushan; Sokhansanj, Shahab

Supply chain optimization for biomass-based power plants is an important research area due to greater emphasis on renewable power energy sources. Biomass supply chain design and operational planning models are often formulated and studied using deterministic mathematical models. While these models are beneficial for making decisions, their applicability to real world problems may be limited because they do not capture all the complexities in the supply chain, including uncertainties in the parameters. This study develops a statistically robust quantile-based approach for stochastic optimization under uncertainty, which builds upon scenario analysis. We apply and evaluate the performance of our approach tomore » address the problem of analyzing competing biomass supply chains subject to stochastic demand and supply. Finally, the proposed approach was found to outperform alternative methods in terms of computational efficiency and ability to meet the stochastic problem requirements.« less

First oxygenated gasoline season shakes out differently than expected

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale, C.; Hackworth, J.H.; Shore, J.M.

1993-10-25

The U.S.'s first oxygenated gasoline season began Nov. 1, 1992. Refiners and marketers achieved compliance with these new specs with little upset to the gasoline production and distribution system. But although the season went smoothly, it did not shake out exactly as projected. Demand for oxygenated gasoline and, in particular, methyl tertiary butyl ether (MTBE), was lower than expected. Prior to the season, refiners were concerned that oxygenates might be in short supply. No supply shortages developed, however, and prices of both oxygenates and gasoline decreased during the season. The paper discusses gasoline demand, administration of the oxygenated gasoline program,more » spillover, reduced demand, ethanol, oxygenate supply, prices, ethanol tax credit, refinery economics, and the outlook for next season.« less

Dynamics of global supply chain and electric power networks: Models, pricing analysis, and computations

NASA Astrophysics Data System (ADS)

Matsypura, Dmytro

In this dissertation, I develop a new theoretical framework for the modeling, pricing analysis, and computation of solutions to electric power supply chains with power generators, suppliers, transmission service providers, and the inclusion of consumer demands. In particular, I advocate the application of finite-dimensional variational inequality theory, projected dynamical systems theory, game theory, network theory, and other tools that have been recently proposed for the modeling and analysis of supply chain networks (cf. Nagurney (2006)) to electric power markets. This dissertation contributes to the extant literature on the modeling, analysis, and solution of supply chain networks, including global supply chains, in general, and electric power supply chains, in particular, in the following ways. It develops a theoretical framework for modeling, pricing analysis, and computation of electric power flows/transactions in electric power systems using the rationale for supply chain analysis. The models developed include both static and dynamic ones. The dissertation also adds a new dimension to the methodology of the theory of projected dynamical systems by proving that, irrespective of the speeds of adjustment, the equilibrium of the system remains the same. Finally, I include alternative fuel suppliers, along with their behavior into the supply chain modeling and analysis framework. This dissertation has strong practical implications. In an era in which technology and globalization, coupled with increasing risk and uncertainty, complicate electricity demand and supply within and between nations, the successful management of electric power systems and pricing become increasingly pressing topics with relevance not only for economic prosperity but also national security. This dissertation addresses such related topics by providing models, pricing tools, and algorithms for decentralized electric power supply chains. This dissertation is based heavily on the following coauthored papers: Nagurney, Cruz, and Matsypura (2003), Nagurney and Matsypura (2004, 2005, 2006), Matsypura and Nagurney (2005), Matsypura, Nagurney, and Liu (2006).

Neurobehavioral evaluations of rats gestationally exposed to gasoline vapors

EPA Science Inventory

As the US fuel supply is moving towards blends with higher ethanol levels, there are questions regarding effects of these fuel vapors in the developing fetus. As part of a project evaluating gasoline-ethanol blends of different proportions. we included an evaluation of inhaled pu...

Eliminating MTBE in Gasoline in 2006

EIA Publications

2006-01-01

A review of the market implications resulting from the rapid change from methyl tertiary butyl ether (MTBE) to ethanol-blended reformulated gasoline (RFG) on the East Coast and in Texas. Strains in ethanol supply and distribution will increase the potential for price volatility in these regions this summer.

48 CFR 239.7305 - Exclusion and limitation on disclosure.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TECHNOLOGY Requirements for Information Relating to Supply Chain Risk 239.7305 Exclusion and limitation on... accordance with the requirements of 10 U.S.C. 2319, for the purpose of reducing supply chain risk in the... an evaluation factor providing for the consideration of supply chain risk in the evaluation of...

Supply Chain Collaboration Alternatives: Understanding the Expected Costs and Benefits.

ERIC Educational Resources Information Center

McLaren, Tim; Head, Milena; Yuan, Yufei

2002-01-01

Discusses collaboration as a recent trend in supply chain management (SCM) that focuses on joint planning, coordination, and process integration between suppliers, customers, and other partners in a supply chain. Analyzes alternative information systems approaches for supporting collaborative SCM, including phone, fax, or email systems; Web-based…

48 CFR 239.7304 - Determination and notification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Requirements for Information Relating to Supply Chain Risk 239.7304 Determination and notification. The... Under Secretary of Defense for Intelligence, that there is a significant supply chain risk to a covered... authority in 239.7305(a)(b) or (c) is necessary to protect national security by reducing supply chain risk...

48 CFR 239.7301 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Information Relating to Supply Chain Risk 239.7301 Applicability. Notwithstanding FAR 39.001, this subpart... evaluation factor (see 10 U.S.C. 2305(a)(2)(A)), relating to supply chain risk; (b) The consideration of... or delivery order contract concerned includes a requirement relating to supply chain risk (see 10 U.S...

48 CFR 252.246-7007 - Contractor Counterfeit Electronic Part Detection and Avoidance System.

Code of Federal Regulations, 2014 CFR

2014-10-01

... chain back to the original manufacturer, whether the electronic parts are supplied as discrete...; clear identification of the name and location of supply chain intermediaries from the manufacturer to... the supply chain until such time that the parts are determined to be authentic. (7) Methodologies to...

78 FR 52511 - Procurement List; Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

..., W7NX USPFO Activity PA ARNG, Annville, PA. Service Type/Location: Integrated Prime Vendor Supply Chain... of PM FSS, does not have a current contract for the provision of Integrated Prime Vendor Supply Chain... kitting or other supply chain management services required were obtained through the DLA depot system. The...

75 FR 77666 - General Motors Company, Formerly Known as General Motors Corporation, Technical Center, Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

.../Professional Services, Excluding Workers of the Global Purchasing and Supply Chain Division, Warren, MI...., and Tek Systems, excluding workers of the Global Purchasing and Supply Chain Division, Warren... Purchasing and Supply Chain Division, Warren, Michigan, who became totally or partially separated from...

75 FR 59238 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

...; Associated Form; and OMB Number: Leading Edge Supply Chain Survey; OMB Number 0701-TBD. Needs and Uses: This study seeks to uncover the emerging trends in supply chain management (SCM) practices, processes and... individuals with in depth experience in commercial supply chain management. Dated: August 27, 2010. Patricia L...

76 FR 34271 - Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,671] Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including Teleworkers Reporting to... Supply Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to Houston...

Time well spent? Assessing nursing-supply chain activities.

PubMed

Ferenc, Jeff

2010-02-01

The amount of time nurses spend providing direct patient care seems to be continually eroding. So it's little wonder a survey conducted last year of critical care, OR nurses and nurse executives found that half of the 1600 respondents feel they spend too much time on supply chain duties. Most also said their supply chain duties impact patient safe ty and their ability to provide bedside care. Experts interviewed for this report believe it's time for supply chain leaders and nurses to develop a closer working partnership. Included are their recommendations to improve performance.

Challenges and opportunities of health care supply chain management in the United States.

PubMed

Elmuti, Dean; Khoury, Grace; Omran, Omar; Abou-Zaid, Ahmed S

2013-01-01

This article explores current supply chain management challenges and initiatives and identifies problems that affect supply chain management success in the U.S. health-care industry. In addition, it investigates the impact of health care supply chain management (SCM) initiatives on the overall organizational effectiveness. The attitudinal results, as well as the performance results presented in this study support the claim of health care proponents that the SCM allows organizations to reduce cost, improve quality, and reduce cycle time, and leads to high performance.

Distribution Free Approach for Coordination of a Supply Chain with Consumer Return

NASA Astrophysics Data System (ADS)

Hu, Jinsong; Xu, Yuanji

Consumer return is considered in a coordination of a supply chain consisting of one manufacturer and one retailer. A distribution free approach is employed to deal with a centralized decision model and a decentralized model which are constructed under the situation with only knowing the demand function's mean and variance, respectively. A markdown money contract is designed to coordinate the supply chain, and it is also proved that the contract can make the supply chain perfectly coordinated. Several numerical examples are given at the end of this paper.

Evolutional Optimization on Material Ordering and Inventory Control of Supply Chain through Incentive Scheme

NASA Astrophysics Data System (ADS)

Prasertwattana, Kanit; Shimizu, Yoshiaki; Chiadamrong, Navee

This paper studied the material ordering and inventory control of supply chain systems. The effect of controlling policies is analyzed under three different configurations of the supply chain systems, and the formulated problem has been solved by using an evolutional optimization method known as Differential Evolution (DE). The numerical results show that the coordinating policy with the incentive scheme outperforms the other policies and can improve the performance of the overall system as well as all members under the concept of supply chain management.

The Complexities of Implementing Cluster Supply Chain - Case Study of JCH

NASA Astrophysics Data System (ADS)

Xue, Xiao; Zhang, Jibiao; Wang, Yang

As a new type of management pattern, "cluster supply chain" (CSC) can help SMEs to face the global challenges through all kinds of collaboration. However, a major challenge in implementing CSC is the gap between theory and practice in the field. In an effort to provide a better understanding of this emerging phenomenon, this paper presents the implementation process of CSC in the context of JingCheng Mechanical & Electrical Holding co., ltd.(JCH) as a case study. The cast study of JCH suggests that the key problems in the practice of cluster supply chain: How do small firms use cluster supply chain? Only after we clarify the problem, the actual construction and operation of cluster supply chain does show successful results as it should be.

Making products available among community health workers: Evidence for improving community health supply chains from Ethiopia, Malawi, and Rwanda

PubMed Central

Chandani, Yasmin; Andersson, Sarah; Heaton, Alexis; Noel, Megan; Shieshia, Mildred; Mwirotsi, Amanda; Krudwig, Kirstin; Nsona, Humphreys; Felling, Barbara

2014-01-01

Background A UNICEF review of the challenges to scaling up integrated community case management (iCCM) found that drug shortages were a common bottleneck. In many settings, little thought has gone into the design of supply chains to the community level and limited evidence exists for how to address these unique challenges. SC4CCM’s purpose was to conduct intervention research to identify proven, simple, affordable solutions that address the unique supply chain challenges faced by CHWs and to demonstrate that supply chain constraints at the community level can be overcome. Methods SC4CCM selected three countries to implement supply chain innovations and developed a theory of change (TOC) framework for the learning phase, which identified the main drivers of product availability and was used for baseline assessments, design, implementation and evaluation of interventions in Ethiopia, Malawi, and Rwanda. Interventions were developed in each country and tested over 12–24 months. Mixed–method follow up assessments were conducted in each country in 2012–2013. The Supply Chain for Community Case Management (SC4CCM) Project then simplified the TOC into a Community Health Supply Chain (CHSC) framework to enable cross country analysis Results The findings from interventions in the three countries suggest that the greatest supply chain benefits are realized when all three CHSC framework elements (data flow, product flow, and effective people) are in place and working together. The synergistic effect of these three elements on supply chain performance was most effectively demonstrated by results from the Enhanced Management and Quality Collaborative interventions in Malawi and Rwanda, respectively, which were characterized by lower mean stockout rates and higher in stock rates on day of visit, when compared to other interventions. Conclusions Many conditions are necessary to ensure continuous product availability at the community level, however a supply chain works best when three key elements (product flow, data flow, and effective people) are deliberately included as an integral part of the system design. Although these elements may be designed differently in different settings, streamlining and synchronizing them while ensuring inclusion of all components for each element improves supply chain performance and promotes product availability at the community level. PMID:25520795

Roles of head group architecture and side chain length on colorimetric response of polydiacetylene vesicles to temperature, ethanol and pH.

PubMed

Charoenthai, Nipaphat; Pattanatornchai, Thanutpon; Wacharasindhu, Sumrit; Sukwattanasinitt, Mongkol; Traiphol, Rakchart

2011-08-15

In this contribution, we report the relationship between molecular structures of polydiacetylene (PDA) vesicles, fabricated by using three monomers, 10,12-tricosadiynoic acid (TCDA), 10,12-pentacosadiynoic acid (PCDA) and N-(2-aminoethyl)pentacosa-10,12-diynamide (AEPCDA), and their color-transition behaviors. The modification of side chain length and head group of the PDA vesicles strongly affects the colorimetric response to temperature, ethanol and pH. A shorter side chain of poly(TCDA) yields weaker inter- and intra-chain dispersion interactions in the bilayers compared to the system of poly(PCDA), which in turn results in a faster color transition upon exposure to all stimuli. A change of head group in poly(AEPCDA) slightly reduces the transition temperature. Interestingly, the colorimetric response of poly(AEPCDA) vesicles to the addition of ethanol is found to occur in a two-step fashion while the response of poly(PCDA) vesicles takes place in a one-step process. The amount of ethanol required for inducing complete color-transition of poly(AEPCDA) vesicles is also much higher, about 87% v/v. The increase of pH to ~9 and ~10 causes a color-transition of poly(TCDA) and poly(PCDA) vesicles, respectively. The poly(AEPCDA) vesicles, on the other hand, change color upon decreasing pH to ~0. The colorimetric response also occurs in a multi-step fashion. These discrepancies are attributed to the architecture of surface layers of poly(AEPCDA), constituting amine and amide groups separated by ethyl linkers. Copyright © 2011 Elsevier Inc. All rights reserved.

Sense and Respond Logistics: Integrating Prediction, Responsiveness, and Control Capabilities

DTIC Science & Technology

2006-01-01

logistics SAR sense and respond SCM Supply Chain Management SCN Supply Chain Network SIDA sense, interpret, decide, act SOS source of supply TCN...commodity supply chain management ( SCM ), will have WS- SCMs that focus on integrating information for a particular MDS. 8 In the remainder of this...developed applications of ABMs for SCM .21 Applications of Agents and Agent-Based Modeling Agents have been used in telecommunications, e-commerce

Effects of Ethanol and Cholesterol on Thermotropic Phase Behavior of Ion-Pair Amphiphile Bilayers.

PubMed

Wen, Chih-Fang; Hsieh, Yu-Ling; Wang, Chun-Wei; Yang, Tzung-Ying; Chang, Chien-Hsiang; Yang, Yu-Min

2018-03-01

Ion-pair amphiphiles (IPAs, also known as catanionic surfactants) are lipid-like double-chained molecules potentially used for fabricating liposome-like vesicular drug and gene carriers. Frequently ethanol and cholesterol are added to modulate the properties of their bilayer membranes. Effects of ethanol and cholesterol on the fundamental properties of IPA bilayers such as thermotropic phase behavior, however, is not known. In this work, the bilayer phase transition behavior of two IPAs (decyltrimethylammonium-tetradecyl sulfate, DeTMA-TS, and dodecyltrimethylammonium-dodecyl sulfate, DTMA-DS) in tris buffer with various amounts of ethanol was studied by using differential scanning calorimetry (DSC). Effect of cholesterol (CHOL) addition on bilayer phase transition of IPAs with 20 vol% ethanol was thereafter systematically investigated. The experimental results showed that the main phase transition temperature (T m ) was monotonously decreased with the increase of ethanol concentration up to 30 vol%. The degree of T m depression by ethanol is essentially the same for the two IPAs regardless of different symmetry in the hydrocarbon chains. Further addition of CHOL, however, caused a slight decrease in T m on the one hand and a significant decrease in the enthalpy of phase transition on the other hand. When the added CHOL exceeded a specific amount, the phase transition disappeared. More hasty disappearance of phase transition was found for IPA with asymmetric structure than the symmetric one. Possible mechanisms of ethanol effect based on binding in the headgroup region of the bilayers and CHOL effect based on opposite (condensing and disordering) interactions with IPA molecules in bilayers, respectively, were proposed.

Costing the supply chain for delivery of ACT and RDTs in the public sector in Benin and Kenya.

PubMed

Shretta, Rima; Johnson, Brittany; Smith, Lisa; Doumbia, Seydou; de Savigny, Don; Anupindi, Ravi; Yadav, Prashant

2015-02-05

Studies have shown that supply chain costs are a significant proportion of total programme costs. Nevertheless, the costs of delivering specific products are poorly understood and ballpark estimates are often used to inadequately plan for the budgetary implications of supply chain expenses. The purpose of this research was to estimate the country level costs of the public sector supply chain for artemisinin-based combination therapy (ACT) and rapid diagnostic tests (RDTs) from the central to the peripheral levels in Benin and Kenya. A micro-costing approach was used and primary data on the various cost components of the supply chain was collected at the central, intermediate, and facility levels between September and November 2013. Information sources included central warehouse databases, health facility records, transport schedules, and expenditure reports. Data from document reviews and semi-structured interviews were used to identify cost inputs and estimate actual costs. Sampling was purposive to isolate key variables of interest. Survey guides were developed and administered electronically. Data were extracted into Microsoft Excel, and the supply chain cost per unit of ACT and RDT distributed by function and level of system was calculated. In Benin, supply chain costs added USD 0.2011 to the initial acquisition cost of ACT and USD 0.3375 to RDTs (normalized to USD 1). In Kenya, they added USD 0.2443 to the acquisition cost of ACT and USD 0.1895 to RDTs (normalized to USD 1). Total supply chain costs accounted for more than 30% of the initial acquisition cost of the products in some cases and these costs were highly sensitive to product volumes. The major cost drivers were found to be labour, transport, and utilities with health facilities carrying the majority of the cost per unit of product. Accurate cost estimates are needed to ensure adequate resources are available for supply chain activities. Product volumes should be considered when costing supply chain functions rather than dollar value. Further work is needed to develop extrapolative costing models that can be applied at country level without extensive micro-costing exercises. This will allow other countries to generate more accurate estimates in the future.

Agricultural policies and biomass fuels

NASA Astrophysics Data System (ADS)

Flaim, S.; Hertzmark, D.

The potentials for biomass energy derived from agricultural products are examined. The production of energy feedstocks from grains is discussed for the example of ethanol production from grain, with consideration given to the beverage process and the wet milling process for obtaining fuel ethanol from grains and sugars, the nonfeedstock costs and energy requirements for ethanol production, the potential net energy gain from ethanol fermentation, the effect of ethanol fuel production on supplies of protein, oils and feed and of ethanol coproducts, net ethanol costs, and alternatives to corn as an ethanol feedstock. Biomass fuel production from crop residues is then considered; the constraints of soil fertility on crop residue removal for energy production are reviewed, residue yields with conventional practices and with reduced tillage are determined, technologies for the direct conversion of cellulose to ethanol and methanol are described, and potential markets for the products of these processes are identified. Implications for agricultural policy of ethanol production from grain and fuel and chemical production from crop residues are also discussed.

Evaluating opportunities to improve material and energy impacts in commodity supply chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanes, Rebecca J.; Carpenter, Alberta

When evaluated at the scale of individual processes, next-generation technologies may be more energy and emissions intensive than current technology. Furthermore, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Materials Flow through Industry (MFI) supply chain modeling tool. The MFI tool is a cradle-to-gate linear network model of the US industrial sector that can model a wide range of manufacturing scenarios,more » including changes in production technology and increases in industrial energy efficiency. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing three lightweight vehicle supply chains to the supply chain of a conventional, standard weight vehicle. Several of the lightweight vehicle supply chains are evaluated under manufacturing scenarios that include next-generation production technologies and next-generation materials. Results indicate that producing lightweight vehicles is more energy and emission intensive than producing the non-lightweight vehicle, but the fuel saved during vehicle use offsets this increase. In this case study, greater reductions in supply chain energy and emissions were achieved through the application of the next-generation technologies than from application of energy efficiency increases.« less

Aligning incentives in supply chains.

PubMed

Narayanan, V G; Raman, Ananth

2004-11-01

Most companies don't worry about the behavior of their supply chain partners. Instead, they expect the supply chain to work efficiently without interference, as if guided by Adam Smith's famed invisible hand. In their study of more than 50 supply networks, V.G. Narayanan and Ananth Raman found that companies often looked out for their own interests and ignored those of their network partners. Consequently, supply chains performed poorly. Those results aren't shocking when you consider that supply chains extend across several functions and many companies, each with its own priorities and goals. Yet all those functions and firms must pull in the same direction for a chain to deliver goods and services to consumers quickly and cost-effectively. According to the authors, a supply chain works well only if the risks, costs, and rewards of doing business are distributed fairly across the network. In fact, misaligned incentives are often the cause of excess inventory, stock-outs, incorrect forecasts, inadequate sales efforts, and even poor customer service. The fates of all supply chain partners are interlinked: If the firms work together to serve consumers, they will all win. However, they can do that only if incentives are aligned. Companies must acknowledge that the problem of incentive misalignment exists and then determine its root cause and align or redesign incentives. They can improve alignment by, for instance, adopting revenue-sharing contracts, using technology to track previously hidden information, or working with intermediaries to build trust among network partners. It's also important to periodically reassess incentives, because even top-performing networks find that changes in technology or business conditions alter the alignment of incentives.

Evaluating opportunities to improve material and energy impacts in commodity supply chains

DOE PAGES

Hanes, Rebecca J.; Carpenter, Alberta

2017-01-10

When evaluated at the scale of individual processes, next-generation technologies may be more energy and emissions intensive than current technology. Furthermore, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Materials Flow through Industry (MFI) supply chain modeling tool. The MFI tool is a cradle-to-gate linear network model of the US industrial sector that can model a wide range of manufacturing scenarios,more » including changes in production technology and increases in industrial energy efficiency. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing three lightweight vehicle supply chains to the supply chain of a conventional, standard weight vehicle. Several of the lightweight vehicle supply chains are evaluated under manufacturing scenarios that include next-generation production technologies and next-generation materials. Results indicate that producing lightweight vehicles is more energy and emission intensive than producing the non-lightweight vehicle, but the fuel saved during vehicle use offsets this increase. In this case study, greater reductions in supply chain energy and emissions were achieved through the application of the next-generation technologies than from application of energy efficiency increases.« less

Animal health and price transmission along livestock supply chains.

PubMed

Aragrande, M; Canali, M

2017-04-01

Animal health diseases can severely affect the food supply chain by causing variations in prices and market demand. Price transmission analysis reveals in what ways price variations are transmitted along the supply chain, and how supply chains of substitute products and different regional markets are also affected. In perfect markets, a price variation would be completely and instantaneously transmitted across the different levels of the supply chain: producers, the processing industry, retailers and consumers. However, empirical studies show that food markets are often imperfect, with anomalies or asymmetries in price transmission and distortions in the distribution of market benefits. This means, for instance, that a price increase at the consumer level may not be transmitted from retailers to processors and producers; yet, on the other hand, price falls may rapidly affect the upstream supply chain. Market concentration and the consequent exertion of market power in key segments of the supply chain can explain price transmission asymmetries and their distributional effects, but other factors may also be involved, such as transaction costs, scale economies, and imperfect information. During the bovine spongiform encephalopathy (BSE) crisis, asymmetric price transmission in the beef supply chain and related meat markets determined distributional effects among sectors. After the spread of the BSE food scare, the fall in demand marginally affected the price paid to retailers, but producers and wholesalers suffered much more, in both price reductions and the time needed to recover to precrisis demand. Price transmission analysis investigates how animal health crises create different economic burdens for various types of stakeholder, and provides useful socioeconomic insights when used with other tools.

Molecular dynamics simulations of aqueous solutions of ethanolamines.

PubMed

López-Rendón, Roberto; Mora, Marco A; Alejandre, José; Tuckerman, Mark E

2006-08-03

We report on molecular dynamics simulations performed at constant temperature and pressure to study ethanolamines as pure components and in aqueous solutions. A new geometric integration algorithm that preserves the correct phase space volume is employed to study molecules having up to three ethanol chains. The most stable geometry, rotational barriers, and atomic charges were obtained by ab initio calculations in the gas phase. The calculated dipole moments agree well with available experimental data. The most stable conformation, due to intramolecular hydrogen bonding interactions, has a ringlike structure in one of the ethanol chains, leading to high molecular stability. All molecular dynamics simulations were performed in the liquid phase. The interaction parameters are the same for the atoms in the ethanol chains, reducing the number of variables in the potential model. Intermolecular hydrogen bonding is also analyzed, and it is shown that water associates at low water mole fractions. The force field reproduced (within 1%) the experimental liquid densities at different temperatures of pure components and aqueous solutions at 313 K. The excess and partial molar volumes are analyzed as a function of ethanolamine concentration.

Improving the Value Chain of Biofuel Manufacturing Operations by Enhancing Coproduct Transportation and Logistics

USDA-ARS?s Scientific Manuscript database

Biofuels, including corn-based ethanol, can partially meet the increasing demand for transportation fuels. The production of ethanol in the U.S. has dramatically increased; so too has the quantity of manufacturing coproducts. These nonfermentable residues (i.e., proteins, fibers, oils) are sold as...

Production of Caproic Acid from Mixed Organic Waste: An Environmental Life Cycle Perspective

PubMed Central

2017-01-01

Caproic acid is an emerging platform chemical with diverse applications. Recently, a novel biorefinery process, that is, chain elongation, was developed to convert mixed organic waste and ethanol into renewable caproic acids. In the coming years, this process may become commercialized, and continuing to improve on the basis of numerous ongoing technological and microbiological studies. This study aims to analyze the environmental performance of caproic acid production from mixed organic waste via chain elongation at this current, early stage of technological development. To this end, a life cycle assessment (LCA) was performed to evaluate the environmental impact of producing 1 kg caproic acid from organic waste via chain elongation, in both a lab-scale and a pilot-scale system. Two mixed organic waste were used as substrates: the organic fraction of municipal solid waste (OFMSW) and supermarket food waste (SFW). Ethanol use was found to be the dominant cause of environmental impact over the life cycle. Extraction solvent recovery was found to be a crucial uncertainty that may have a substantial influence on the life-cycle impacts. We recommend that future research and industrial producers focus on the reduction of ethanol use in chain elongation and improve the recovery efficiency of the extraction solvent. PMID:28513150

Co-production of acetone and ethanol with molar ratio control enables production of improved gasoline or jet fuel blends.

PubMed

Baer, Zachary C; Bormann, Sebastian; Sreekumar, Sanil; Grippo, Adam; Toste, F Dean; Blanch, Harvey W; Clark, Douglas S

2016-10-01

The fermentation of simple sugars to ethanol has been the most successful biofuel process to displace fossil fuel consumption worldwide thus far. However, the physical properties of ethanol and automotive components limit its application in most cases to 10-15 vol% blends with conventional gasoline. Fermentative co-production of ethanol and acetone coupled with a catalytic alkylation reaction could enable the production of gasoline blendstocks enriched in higher-chain oxygenates. Here we demonstrate a synthetic pathway for the production of acetone through the mevalonate precursor hydroxymethylglutaryl-CoA. Expression of this pathway in various strains of Escherichia coli resulted in the co-production of acetone and ethanol. Metabolic engineering and control of the environmental conditions for microbial growth resulted in controllable acetone and ethanol production with ethanol:acetone molar ratios ranging from 0.7:1 to 10.0:1. Specifically, use of gluconic acid as a substrate increased production of acetone and balanced the redox state of the system, predictively reducing the molar ethanol:acetone ratio. Increases in ethanol production and the molar ethanol:acetone ratio were achieved by co-expression of the aldehyde/alcohol dehydrogenase (AdhE) from E. coli MG1655 and by co-expression of pyruvate decarboxylase (Pdc) and alcohol dehydrogenase (AdhB) from Z. mobilis. Controlling the fermentation aeration rate and pH in a bioreactor raised the acetone titer to 5.1 g L(-1) , similar to that obtained with wild-type Clostridium acetobutylicum. Optimizing the metabolic pathway, the selection of host strain, and the physiological conditions employed for host growth together improved acetone titers over 35-fold (0.14-5.1 g/L). Finally, chemical catalysis was used to upgrade the co-produced ethanol and acetone at both low and high molar ratios to higher-chain oxygenates for gasoline and jet fuel applications. Biotechnol. Bioeng. 2016;113: 2079-2087. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

17 CFR 240.13p-1 - Requirement of report regarding disclosure of registrant's supply chain information regarding...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Requirement of report regarding disclosure of registrant's supply chain information regarding conflict minerals. 240.13p-1 Section...'s supply chain information regarding conflict minerals. Every registrant that files reports with the...

48 CFR 239.7302 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Information Relating to Supply Chain Risk 239.7302 Definitions. As used in this subpart— Covered item means an... integrity of which could result in a supply chain risk for a covered system (see section 806(e)(6) of Pub. L... foreign policy. Information technology, in lieu of the definition at FAR 2.1, and supply chain risk, are...

17 CFR 240.13p-1 - Requirement of report regarding disclosure of registrant's supply chain information regarding...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Requirement of report regarding disclosure of registrant's supply chain information regarding conflict minerals. 240.13p-1 Section...'s supply chain information regarding conflict minerals. Every registrant that files reports with the...

A supply chain approach to biochar systems [Chapter 2

Treesearch

Nathaniel M. Anderson; Richard D. Bergman; Deborah S. Page-Dumroese

2017-01-01

Biochar systems are designed to meet four related primary objectives: improve soils, manage waste, generate renewable energy, and mitigate climate change. Supply chain models provide a holistic framework for examining biochar systems with an emphasis on product life cycle and end use. Drawing on concepts in supply chain management and engineering, this chapter presents...

75 FR 29307 - Web Based Supply Chain Management Commodity Offer Form, Paperwork Collection Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [Doc. No FV10-CP-01, AMS-FV-10-0041] Web... collection request is required for the implementation of a new system named Web Based Supply Chain Management...-2782. Mail: David Tuckwiller, Project Manager, Web Based Supply Chain Management System, Agricultural...

Master's Degree in Management Information Systems with a Supply Chain Management Focus

ERIC Educational Resources Information Center

Ramaswamy, Kizhanatham V.; Boyd, Joseph L.; Desai, Mayur

2007-01-01

A graduate curriculum in Management Information Systems with a Supply Chain Management focus is presented. The motivation for this endeavor stems from the fact that the global scope of modern business organizations and the competitive environment in which they operate, requires an information system leveraged supply chain management system (SCM)…

Exploring the Dynamics of Globalization: Supply Chain Vulnerability to Natural Disasters

ERIC Educational Resources Information Center

Kalafsky, Ronald V.; Conner, Neil

2015-01-01

Global supply chains play an increasingly important role in the economy and should therefore be addressed within geography coursework, especially given concerns that geographers have not fully explored various angles of globalization. This article explores the use of an online case study on supply chains and their vulnerability to natural…

77 FR 37055 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

... Request; Secure Supply Chain Pilot Program AGENCY: Food and Drug Administration, HHS. ACTION: Notice... identified with the title Secure Supply Chain Pilot Program. Also include the FDA docket number found in... following proposed collection of information to OMB for review and clearance: ``Secure Supply Chain Pilot...

78 FR 3031 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... PRINTING SYSTEMS (PPS), SUPPLY CHAIN OPERATIONS (FORMERLY KNOWN AS IWS), VANCOUVER, WA. In accordance with... Services (IWS) and Supply Chain Operations (formerly known as IWS) units. The workers within PPS (both... Group, Vancouver, Washington (TA-W-81,739A), and H-P, PPS, Supply Chain Operations, Vancouver...

76 FR 1182 - Determination of System Attributes for the Tracking and Tracing of Prescription Drugs; Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

... and obtaining input from supply chain partners on attributes and standards for the identification... protecting public health by securing the drug supply chain against the introduction of counterfeit and other... supply chain and protecting consumers from the threats posed by counterfeit drugs. The ability to track...

An Exploration of Supply Chain Management Practices in the Central District Municipality

ERIC Educational Resources Information Center

Ambe, I. M.

2009-01-01

The main objective of the paper is to explore supply chain management practices in the Central District Municipality, North West province of South Africa, using the grounded theory methodology. Supply chain management was introduced in the South African public sector to alleviate deficiencies related to governance, interpretation and…

Teaching Teachers about Supply Chain Management to Influence Students' Career and Education Choices

ERIC Educational Resources Information Center

Gardner, Leslie L.

2013-01-01

Since teachers are influential in high school students' career choices, enabling high school teachers to introduce educational and career opportunities in supply chain management is a viable strategy for reaching high school students about these opportunities. This article presents a pilot program of supply chain workshops to educate high school…

78 FR 42381 - Administrative Detention of Drugs Intended for Human or Animal Use

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-15

... drug supply chain. Specifically, FDA will be able to administratively detain drugs encountered during... integrity of the drug supply chain. Specifically, administrative detention is intended to protect the public... better protect the integrity of the drug supply chain. One of those new authorities is section 709, which...

Chantey Castings: A Hands-On Simulation to Teach Constraint Management and Demand-Driven Supply Chain Approaches

ERIC Educational Resources Information Center

Grandzol, Christian J.; Grandzol, John R.

2018-01-01

Supply chain design and constraint management are widely-adopted techniques in industry, necessitating that operations and supply chain educators teach these topics in ways that enhance student learning and retention, optimize resource utilization (especially time), and maximize student interest. The Chantey Castings Simulation provides a platform…

Impact of RFID Information-Sharing Coordination over a Supply Chain with Reverse Logistics

ERIC Educational Resources Information Center

Nativi Nicolau, Juan Jose

2016-01-01

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the…

Building an efficient supply chain.

PubMed

Scalise, Dagmara

2005-08-01

Realizing at last that supply chain management can produce efficiencies and save costs, hospitals are beginning to adopt practices from other industries, such as the concept of extended supply chains, to improve product flow. They're also investing in enterprise planning resource software, radio frequency identification and other technologies, using quality data to drive standardization and streamlining processes.

Leveraging Human Resource Development Expertise to Improve Supply Chain Managers' Skills and Competencies

ERIC Educational Resources Information Center

Ellinger, Alexander E.; Ellinger, Andrea D.

2014-01-01

Purpose: There is an ongoing shortage of talented supply chain managers with the necessary skills and business-related competencies to manage increasingly complex and strategically important supply chain processes. The purpose of this paper is to propose that organizations can create and maintain competitive advantage by leveraging the expertise…

Sustainable Supply Chain Management Programs in the 21st Century

ERIC Educational Resources Information Center

Neureuther, Brian D.; O'Neill, Kevin

2011-01-01

One of the most difficult challenges for an undergraduate supply chain management program at smaller universities is to create an environment of sustainability. Supply chain management is not at the tip of tongue for many graduating high school students and few undergraduate curriculums require a course in the content area. This research addresses…

Coopetitive Supply Chain Relationship Model: Application to the Smartphone Manufacturing Network.

PubMed

Kwok, Jeremy Jie Ming; Lee, Dong-Yup

2015-01-01

Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business.

Coopetitive Supply Chain Relationship Model: Application to the Smartphone Manufacturing Network

PubMed Central

Kwok, Jeremy Jie Ming; Lee, Dong-Yup

2015-01-01

Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business. PMID:26186227

A Case Study Using Modeling and Simulation to Predict Logistics Supply Chain Issues

NASA Technical Reports Server (NTRS)

Tucker, David A.

2007-01-01

Optimization of critical supply chains to deliver thousands of parts, materials, sub-assemblies, and vehicle structures as needed is vital to the success of the Constellation Program. Thorough analysis needs to be performed on the integrated supply chain processes to plan, source, make, deliver, and return critical items efficiently. Process modeling provides simulation technology-based, predictive solutions for supply chain problems which enable decision makers to reduce costs, accelerate cycle time and improve business performance. For example, United Space Alliance, LLC utilized this approach in late 2006 to build simulation models that recreated shuttle orbiter thruster failures and predicted the potential impact of thruster removals on logistics spare assets. The main objective was the early identification of possible problems in providing thruster spares for the remainder of the Shuttle Flight Manifest. After extensive analysis the model results were used to quantify potential problems and led to improvement actions in the supply chain. Similarly the proper modeling and analysis of Constellation parts, materials, operations, and information flows will help ensure the efficiency of the critical logistics supply chains and the overall success of the program.

Butanol is cytotoxic to Lactococcus lactis while ethanol and hexanol are cytostatic.

PubMed

Hviid, Anne-Mette Meisner; Ruhdal-Jensen, Peter; Kilstrup, Mogens

2017-04-01

Lactic acid bacteria currently used extensively by the dairy industry have a superior tolerance towards short-chain alcohols, which makes them interesting targets for use in future bio-refineries. The mechanism underlying the alcohol tolerance of lactic acid bacteria has so far received little attention. In the present study, the physiological alcohol stress response of Lactococcus lactis subsp. cremoris MG1363 towards the primary, even-chain alcohols ethanol, butanol and hexanol, was characterized. The alcohol tolerance of L. lactis was found to be comparable to those reported for highly alcohol-resistant lactic acid bacteria. Combined results from alcohol survival rate, live/dead staining, and a novel usage of the β-galactosidase assay, revealed that while high concentrations of ethanol and hexanol were cytostatic to L. lactis, high concentrations of butanol were cytotoxic, causing irreparable damages to the cell membrane.

Scaling up antiretroviral therapy in Uganda: using supply chain management to appraise health systems strengthening.

PubMed

Windisch, Ricarda; Waiswa, Peter; Neuhann, Florian; Scheibe, Florian; de Savigny, Don

2011-08-01

Strengthened national health systems are necessary for effective and sustained expansion of antiretroviral therapy (ART). ART and its supply chain management in Uganda are largely based on parallel and externally supported efforts. The question arises whether systems are being strengthened to sustain access to ART. This study applies systems thinking to assess supply chain management, the role of external support and whether investments create the needed synergies to strengthen health systems. This study uses the WHO health systems framework and examines the issues of governance, financing, information, human resources and service delivery in relation to supply chain management of medicines and the technologies. It looks at links and causal chains between supply chain management for ART and the national supply system for essential drugs. It combines data from the literature and key informant interviews with observations at health service delivery level in a study district. Current drug supply chain management in Uganda is characterized by parallel processes and information systems that result in poor quality and inefficiencies. Less than expected health system performance, stock outs and other shortages affect ART and primary care in general. Poor performance of supply chain management is amplified by weak conditions at all levels of the health system, including the areas of financing, governance, human resources and information. Governance issues include the lack to follow up initial policy intentions and a focus on narrow, short-term approaches. The opportunity and need to use ART investments for an essential supply chain management and strengthened health system has not been exploited. By applying a systems perspective this work indicates the seriousness of missing system prerequisites. The findings suggest that root causes and capacities across the system have to be addressed synergistically to enable systems that can match and accommodate investments in disease-specific interventions. The multiplicity and complexity of existing challenges require a long-term and systems perspective essentially in contrast to the current short term and program-specific nature of external assistance.

Balancing detail and scale in assessing transparency to improve the governance of agricultural commodity supply chains

NASA Astrophysics Data System (ADS)

Godar, Javier; Suavet, Clément; Gardner, Toby A.; Dawkins, Elena; Meyfroidt, Patrick

2016-03-01

To date, assessments of the sustainability of agricultural commodity supply chains have largely relied on some combination of macro-scale footprint accounts, detailed life-cycle analyses and fine-scale traceability systems. Yet these approaches are limited in their ability to support the sustainability governance of agricultural supply chains, whether because they are intended for coarser-grained analyses, do not identify individual actors, or are too costly to be implemented in a consistent manner for an entire region of production. Here we illustrate some of the advantages of a complementary middle-ground approach that balances detail and scale of supply chain transparency information by combining consistent country-wide data on commodity production at the sub-national (e.g. municipal) level with per shipment customs data to describe trade flows of a given commodity covering all companies and production regions within that country. This approach can support supply chain governance in two key ways. First, enhanced spatial resolution of the production regions that connect to individual supply chains allows for a more accurate consideration of geographic variability in measures of risk and performance that are associated with different production practices. Second, identification of key actors that operate within a specific supply chain, including producers, traders, shippers and consumers can help discriminate coalitions of actors that have shared stake in a particular region, and that together are capable of delivering more cost-effective and coordinated interventions. We illustrate the potential of this approach with examples from Brazil, Indonesia and Colombia. We discuss how transparency information can deepen understanding of the environmental and social impacts of commodity production systems, how benefits are distributed among actors, and some of the trade-offs involved in efforts to improve supply chain sustainability. We then discuss the challenges and opportunities of our approach to strengthen supply chain governance and leverage more effective and fair accountability systems.

Reducing stock-outs of essential tuberculosis medicines: a system dynamics modelling approach to supply chain management.

PubMed

Bam, L; McLaren, Z M; Coetzee, E; von Leipzig, K H

2017-10-01

The under-performance of supply chains presents a significant hindrance to disease control in developing countries. Stock-outs of essential medicines lead to treatment interruption which can force changes in patient drug regimens, drive drug resistance and increase mortality. This study is one of few to quantitatively evaluate the effectiveness of supply chain policies in reducing shortages and costs. This study develops a systems dynamics simulation model of the downstream supply chain for amikacin, a second-line tuberculosis drug using 10 years of South African data. We evaluate current supply chain performance in terms of reliability, responsiveness and agility, following the widely-used Supply Chain Operation Reference framework. We simulate 141 scenarios that represent different combinations of supplier characteristics, inventory management strategies and demand forecasting methods to identify the Pareto optimal set of management policies that jointly minimize the number of shortages and total cost. Despite long supplier lead times and unpredictable demand, the amikacin supply chain is 98% reliable and agile enough to accommodate a 20% increase in demand without a shortage. However, this is accomplished by overstocking amikacin by 167%, which incurs high holding costs. The responsiveness of suppliers is low: only 57% of orders are delivered to the central provincial drug depot within one month. We identify three Pareto optimal safety stock management policies. Short supplier lead time can produce Pareto optimal outcomes even in the absence of other optimal policies. This study produces concrete, actionable guidelines to cost-effectively reduce stock-outs by implementing optimal supply chain policies. Preferentially selecting drug suppliers with short lead times accommodates unexpected changes in demand. Optimal supply chain management should be an essential component of national policy to reduce the mortality rate. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Supply Chain Modeling for Fluorspar and Hydrofluoric Acid and Implications for Further Analyses

DTIC Science & Technology

2015-04-01

Supply Other usesUS Supply Fluorspar Mining HF Production Downstream Products Stages of Production Other uses “Upstream” Supply and Demand...chain, as follows: • The three stages of the chain considered in the analysis are listed across the top: Fluorspar Mining , HF Production, and (pro...consumption of HF is represented by the maroon rectangle. • The lines depict material flows from fluorspar mining , to HF production, to downstream fluorine

Developing Tailored Supply Strategies

DTIC Science & Technology

2007-01-01

David J . Closs, and M. Bixby Cooper, Supply Chain Logistics Management, New York: McGraw-Hill, 2002. Burt, David N., and Richard L. Pinkerton, A ...Supply Chain Management, Vol. 37, No. 2, Spring 2001, pp. 8–15. Bibliography 119 Coyle, John J ., Edward J . Bardi , and C. John Langley Jr., The...Gelderman, Cees J ., and Arjan J . van Weele, “Strategic Direction Through Purchasing Portfolio Management: A Case Study,” The Journal of Supply Chain

On adaptive modified projective synchronization of a supply chain management system

NASA Astrophysics Data System (ADS)

Tirandaz, Hamed

2017-12-01

In this paper, the synchronization problem of a chaotic supply chain management system is studied. A novel adaptive modified projective synchronization method is introduced to control the behaviour of the leader supply chain system by a follower chaotic system and to adjust the leader system parameters until the measurable errors of the system parameters converge to zero. The stability evaluation and convergence analysis are carried out by the Lyapanov stability theorem. The proposed synchronization and antisynchronization techniques are studied for identical supply chain chaotic systems. Finally, some numerical simulations are presented to verify the effectiveness of the theoretical discussions.

Sustainable value creation through new industrial supply chains in apparel and fashion

NASA Astrophysics Data System (ADS)

Pal, R.; Sandberg, E.

2017-10-01

This paper explores the inter-organizational value creation, in apparel supply chain context, through circularity and digitalization for sustainability, by gathering evidences from vivid research experiences. It can be highlighted that inter-organizational value creation in both circular- and digital- apparel supply chains largely builds upon a variety of collaborative initiatives, and among a range of included members. Knowledge co-evolvement and business co-development, end-to-end integration and information transfer, and open networks are crucial to such collaborations - making development of new supply chain structures a meta-capability of apparel firms in the changing industrial landscape.

Future Supply Chains Enabled by Continuous Processing—Opportunities and Challenges. May 20–21, 2014 Continuous Manufacturing Symposium

PubMed Central

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-01-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily “continuous processing”-based supply chain. The current predominantly “large batch” and centralized manufacturing system designed for the “blockbuster” drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more “flow-through” operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:840–849, 2015 PMID:25631279

[Application of supply chain integration management of medical consumables].

PubMed

Zhang, Jian

2013-07-01

This paper introduces the background, the content, the information management system of material supply chain integration management and the consumables management process. The system helps to expand the selection of hospital supplies varieties, to reduce consumables management costs, to improve the efficiency of supplies, to ensure supplies safety, reliability and traceability.

Coupled ecosystem/supply chain modelling of fish products from sea to shelf: the Peruvian anchoveta case.

PubMed

Avadí, Angel; Fréon, Pierre; Tam, Jorge

2014-01-01

Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities.

Mapping supply chain risk by network analysis of product platforms

DOE PAGES

Nuss, Philip; Graedel, T. E.; Alonso, Elisa; ...

2016-10-15

Modern technology makes use of a variety of materials to allow for its proper functioning. Here, to explore in detail the relationships connecting materials to the products that require them, we map supply chains for five product platforms (a cadmium telluride solar cell, a germanium solar cell, a turbine blade, a lead acid battery, and a hard drive (HD) magnet) using a data ontology that specifies the supply chain actors (nodes) and linkages (e.g., material exchange and contractual relationships) among them. We then propose a set of network indicators (product complexity, producer diversity, supply chain length, and potential bottlenecks) tomore » assess the situation for each platform in the overall supply chain networks. Among the results of interest are the following: (1) the turbine blade displays a high product complexity, defined by the material linkages to the platform; (2) the germanium solar cell is produced by only a few manufacturers globally and requires more physical transformation steps than do the other project platforms; (3) including production quantity and sourcing countries in the assessment shows that a large portion of nodes of the supply chain of the hard-drive magnet are located in potentially unreliable countries. Finally, we conclude by discussing how the network analysis of supply chains could be combined with criticality and scenario analyses of abiotic raw materials to comprise a comprehensive picture of product platform risk.« less

Coupled Ecosystem/Supply Chain Modelling of Fish Products from Sea to Shelf: The Peruvian Anchoveta Case

PubMed Central

Avadí, Angel; Fréon, Pierre; Tam, Jorge

2014-01-01

Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities. PMID:25003196

Mapping supply chain risk by network analysis of product platforms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nuss, Philip; Graedel, T. E.; Alonso, Elisa

Modern technology makes use of a variety of materials to allow for its proper functioning. Here, to explore in detail the relationships connecting materials to the products that require them, we map supply chains for five product platforms (a cadmium telluride solar cell, a germanium solar cell, a turbine blade, a lead acid battery, and a hard drive (HD) magnet) using a data ontology that specifies the supply chain actors (nodes) and linkages (e.g., material exchange and contractual relationships) among them. We then propose a set of network indicators (product complexity, producer diversity, supply chain length, and potential bottlenecks) tomore » assess the situation for each platform in the overall supply chain networks. Among the results of interest are the following: (1) the turbine blade displays a high product complexity, defined by the material linkages to the platform; (2) the germanium solar cell is produced by only a few manufacturers globally and requires more physical transformation steps than do the other project platforms; (3) including production quantity and sourcing countries in the assessment shows that a large portion of nodes of the supply chain of the hard-drive magnet are located in potentially unreliable countries. Finally, we conclude by discussing how the network analysis of supply chains could be combined with criticality and scenario analyses of abiotic raw materials to comprise a comprehensive picture of product platform risk.« less

Product carbon footprint assessment supporting the green supply chain construction in household appliance manufacturers

NASA Astrophysics Data System (ADS)

Chen, Jianhua; Sun, Liang; Guo, Huiting

2017-11-01

Supply chain carbon emission is one of the factors considered in the green supply chain management. A method was designed to support the green supply chain measures based on the carbon footprint assessment for products. A research for 3 typical household appliances carbon footprint assessment was conducted to explore using product carbon footprint assessment method to guide the green supply chain management of the manufacturers. The result could reflect the differences directions on green supply chain management of manufacturers of washing machine, air conditioner and microwave, respectively That is, the washing machine manufacturer should pay attention to the low carbon activities in upstream suppliers in highest priority, and also the promotion of product energy efficiency. The air conditioner manufacturer should pay attention to the product energy efficiency increasing in highest priority, and the improvement of refrigerant to decrease its GWP. And the microwave manufacture could only focus on the energy efficiency increasing because it contributes most of the carbon emission to its carbon footprint. Besides, the representativeness of product and the applicability of the method were also discussed. As the manufacturer could master the technical information on raw material and components of its products to conduct the product carbon footprint assessment, this method could help the manufacturer to identify the effective green supply chain measures in the preliminary stage.

77 FR 5521 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-03

... recommendations on how to proceed on those topics: The work of the Global Supply Chain Security Air Cargo..., 2011 meeting: The National Supply Chain Security Strategy. The CBP Initiatives of the Customs and Trade Partnership Against Terrorism (C-TPAT) program and Beyond the Border (BTB)--Report by the Global Supply Chain...

"Supply Chain-Marketing Shark Tank" Experiential Lab Game in Interdisciplinary Business Education: Qualitative and Quantitative Analyses

ERIC Educational Resources Information Center

Arora, A.; Arora, A. Saxena

2015-01-01

This article provides educators in business schools with a new interdisciplinary experiential lab game called Supply Chain-Marketing (SC-Mark) Shark Tank game, which can be implemented in both Supply Chain Management (SCM) and Marketing courses. The SC-Mark experiential lab game is a real-life business environment simulation that explores…

Digital Piracy: An Assessment of Consumer Piracy Risk and Optimal Supply Chain Coordination Strategies

ERIC Educational Resources Information Center

Jeong, Bong-Keun

2010-01-01

Digital piracy and the emergence of new distribution channels have changed the dynamics of supply chain coordination and created many interesting problems. There has been increased attention to understanding the phenomenon of consumer piracy behavior and its impact on supply chain profitability. The purpose of this dissertation is to better…

The Diffusion and Impact of Radio Frequency Identification in Supply Chains: A Multi-Method Approach

ERIC Educational Resources Information Center

Wu, Xiaoran

2012-01-01

As a promising and emerging technology for supply chain management, Radio Frequency Identification (RFID) is a new alternative to existing tracking technologies and also allows a range of internal control and supply chain coordination. RFID has generated a significant amount of interest and activities from both practitioners and researchers in…

Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Josh; West, Devin

This analysis identifies key opportunities in the carbon fiber supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas — wind energy, aerospace, automotive, and pressure vessels — that top the list of industries using carbon fiber and carbon fiber reinforced polymers. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components.

Hospital employment of physicians and supply chain performance: An empirical investigation.

PubMed

Young, Gary J; Nyaga, Gilbert N; Zepeda, E David

2016-01-01

As hospital employment of physicians becomes increasingly common in the United States, much speculation exists as to whether this type of arrangement will promote hospital operating efficiency in such areas as supply chain management. Little empirical research has been conducted to address this question. The aim of this study was to provide an exploratory assessment of whether hospital employment of physicians is associated with better supply chain performance. Drawing from both agency and stewardship theories, we examined whether hospitals with a higher proportion of employed medical staff members have relatively better supply chain performance based on two performance measures, supply chain expenses and inventory costs. We conducted the study using a pooled, cross-sectional sample of hospitals located in California between 2007 and 2009. Key data sources were hospital annual financial reports from California's Office of Statewide Health Policy and Development and the American Hospital Association annual survey of hospitals. To examine the relationship between physician employment and supply chain performance, we specified physician employment as the proportion of total employed medical staff members as well as the proportion of employed medical staff members within key physician subgroups. We analyzed the data using generalized estimating equations. Study results generally supported our hypothesis that hospital employment of physicians is associated with better supply chain performance. Although the results of our study should be viewed as preliminary, the trend in the United States toward hospital employment of physicians may be a positive development for improved hospital operating efficiency. Hospital managers should also be attentive to training and educational resources that medical staff members may need to strengthen their role in supply chain activities.

Evaluating Opportunities to Improve Material and Energy Impacts in Commodity Supply Chains.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanes, Rebecca J.; Carpenter, Alberta

When evaluated at the process level, next-generation technologies may be more energy and emissions intensive than current technology. However, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Material Flows through Industry (MFI) scenario modeling tool. The MFI tool is a cradle-to-gate linear network model of the U.S. industrial sector that can model a wide range of manufacturing scenarios, including changes inmore » production technology, increases in industrial energy efficiency, and substitution between functionally equivalent materials. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing a steel supply chain to the supply chains of several functionally equivalent materials. Several of the alternatives to the baseline steel supply chain include next-generation production technologies and materials. Results of the case study show that aluminum production scenarios can out-perform the steel supply chain by using either an advanced smelting technology or an increased aluminum recycling rate. The next-generation material supply chains do not perform as well as either aluminum or steel, but may offer additional use phase reductions in energy and emissions that are outside the scope of the MFI tool. Future work will combine results from the MFI tool with a use phase analysis.« less

Developing and sustaining human resources in the health supply chain in Ethiopia: barriers and enablers.

PubMed

Kälvemark Sporrong, Sofia; Traulsen, Janine M; Damene Kabtimer, Woynabeba; Mekasha Habtegiorgis, Bitsatab; Teshome Gebregeorgise, Dawit; Essah, Nana Am; Khan, Sara A; Brown, Andrew N

2016-01-01

The health supply chain is often the weakest link in achieving the health-related Millennium Development Goals and universal health coverage, requiring trained professionals who are often unavailable. In Ethiopia there have been recent developments in the area of health supply chain management. The aim of this study was to explore the current status of the development of human resources in health supply chain management in Ethiopia and to identify important factors affecting this development. A series of face-to-face interviews with key stakeholders was carried out in 2014. The interviews were conducted using a semi-structured interview guide. The interview guide comprised 51 questions. A qualitative analysis of transcripts was made. A total of 25 interviews were conducted. Three themes were identified: General changes: recognition, commitment and resources, Education and training, and Barriers and enablers. Results confirm the development of human resources in health supply chain management in many areas. However, several problems were identified including lack of coordination, partly due to the large number of stakeholders; reported high staff mobility; and a lack of overall strategy regarding the job/career structures necessary for maintaining human resources. Rural areas have a particular set of problems, including in transportation of goods and personnel, attracting and keeping personnel, and in communication and access to information. Ethiopia is on the way to developing a nationwide viable system for health supply chain management. However, there are still challenges. Short-term challenges include the importance of highlighting strategies and programs for human resources in health supply chain management. In the long term, commitments to financial support must be obtained. A strategy is needed for the further development and sustainability of human resources in the health supply chain in Ethiopia.

Pharmaceutical supply chain risk assessment in Iran using analytic hierarchy process (AHP) and simple additive weighting (SAW) methods.

PubMed

Jaberidoost, Mona; Olfat, Laya; Hosseini, Alireza; Kebriaeezadeh, Abbas; Abdollahi, Mohammad; Alaeddini, Mahdi; Dinarvand, Rassoul

2015-01-01

Pharmaceutical supply chain is a significant component of the health system in supplying medicines, particularly in countries where main drugs are provided by local pharmaceutical companies. No previous studies exist assessing risks and disruptions in pharmaceutical companies while assessing the pharmaceutical supply chain. Any risks affecting the pharmaceutical companies could disrupt supply medicines and health system efficiency. The goal of this study was the risk assessment in pharmaceutical industry in Iran considering process's priority, hazard and probability of risks. The study was carried out in 4 phases; risk identification through literature review, risk identification in Iranian pharmaceutical companies through interview with experts, risk analysis through a questionnaire and consultation with experts using group analytic hierarchy process (AHP) method and rating scale (RS) and risk evaluation of simple additive weighting (SAW) method. In total, 86 main risks were identified in the pharmaceutical supply chain with perspective of pharmaceutical companies classified in 11 classes. The majority of risks described in this study were related to the financial and economic category. Also financial management was found to be the most important factor for consideration. Although pharmaceutical industry and supply chain were affected by current political conditions in Iran during the study time, but half of total risks in the pharmaceutical supply chain were found to be internal risks which could be fixed by companies, internally. Likewise, political status and related risks forced companies to focus more on financial and supply management resulting in less attention to quality management.

A strategic decision-making model considering the social costs of carbon dioxide emissions for sustainable supply chain management.

PubMed

Tseng, Shih-Chang; Hung, Shiu-Wan

2014-01-15

Incorporating sustainability into supply chain management has become a critical issue driven by pressures from governments, customers, and various stakeholder groups over the past decade. This study proposes a strategic decision-making model considering both the operational costs and social costs caused by the carbon dioxide emissions from operating such a supply chain network for sustainable supply chain management. This model was used to evaluate carbon dioxide emissions and operational costs under different scenarios in an apparel manufacturing supply chain network. The results showed that the higher the social cost rate of carbon dioxide emissions, the lower the amount of the emission of carbon dioxide. The results also suggested that a legislation that forces the enterprises to bear the social costs of carbon dioxide emissions resulting from their economic activities is an effective approach to reducing carbon dioxide emissions. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Critical Role of Supply Chains in Preventing Human Immunodeficiency Virus Drug Resistance in Low- and Middle-Income Settings.

PubMed

Minior, Thomas; Douglas, Meaghan; Edgil, Dianna; Srivastava, Meena; Crowley, John; Firth, Jacqueline; Lapidos-Salaiz, Ilana; Williams, Jason; Lee, Lana

2017-12-01

The functioning of the supply chain may be a driving factor behind the development of human immunodeficiency virus (HIV) drug resistance (HIVDR) in many low- and middle-income countries (LMICs). Additionally, the effectiveness of supply chains will likely impact the scale-up of both viral-load monitoring and HIVDR testing. This article describes the complexities of global supply chains relevant for LMICs and presents early data on stock-outs and drug substitutions in several countries supported by the US President's Emergency Plan for AIDS Relief. Supply chain systems will need to be strengthened to minimize interruptions as new antiretroviral therapy regimens are introduced and to facilitate adoption of new laboratory technologies. Published by Oxford University Press for the Infectious Diseases Society of America 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Development of S-ARIMA Model for Forecasting Demand in a Beverage Supply Chain

NASA Astrophysics Data System (ADS)

Mircetic, Dejan; Nikolicic, Svetlana; Maslaric, Marinko; Ralevic, Nebojsa; Debelic, Borna

2016-11-01

Demand forecasting is one of the key activities in planning the freight flows in supply chains, and accordingly it is essential for planning and scheduling of logistic activities within observed supply chain. Accurate demand forecasting models directly influence the decrease of logistics costs, since they provide an assessment of customer demand. Customer demand is a key component for planning all logistic processes in supply chain, and therefore determining levels of customer demand is of great interest for supply chain managers. In this paper we deal with exactly this kind of problem, and we develop the seasonal Autoregressive IntegratedMoving Average (SARIMA) model for forecasting demand patterns of a major product of an observed beverage company. The model is easy to understand, flexible to use and appropriate for assisting the expert in decision making process about consumer demand in particular periods.

The development of a green supply chain dual-objective facility by considering different levels of uncertainty

NASA Astrophysics Data System (ADS)

Khorasani, Sasan Torabzadeh; Almasifard, Maryam

2017-11-01

This paper presents a dual-objective facility programming model for a green supply chain network. The main objectives of the presented model are minimizing overall expenditure and negative environmental impacts of the supply chain. This study contributes to the existing literature by incorporating uncertainty in customer demand, suppliers, production, and casting capacity. An industrial case study is also analyzed to reveal the feasibility of the proposed model and its application. A fuzzy approach which is known as TH is used to solve the suggested dual-objective model. TH approach is integration of a max-min method (LH) and modified version of Werners' approach (MW). The outcome of this study reveals that the presented model can support green supply chain network in different levels of uncertainty. In presented model, cost and negative environmental impacts derived from the supply chain network will increase of higher levels of uncertainty.

Vaccine supply chains need to be better funded and strengthened, or lives will be at risk.

PubMed

Kaufmann, Judith R; Miller, Roger; Cheyne, James

2011-06-01

In the next decade, at least twelve additional vaccines that target such diseases as typhoid, malaria, and dengue will become available to lower- and middle-income countries. These vaccines must travel along what are called supply chains, which include all personnel, systems, equipment, and activities involved in ensuring that vaccines are effectively delivered from the point of production to the people who need them. But for various reasons, supply chains are already strained in many developing countries, and the potential inability to distribute new vaccines will place lives at risk. Among the many steps needed to strengthen the global vaccine supply chain, we suggest that the international community pursue improved coordination between organizations that donate and ship vaccines and the host-country officials who receive and distribute the vaccines, as well as better training for supply-chain managers.

SCOR based key success factors in cooking oil supply chain buyers perspective in Padang City

NASA Astrophysics Data System (ADS)

Zahara, Fatimah; Hadiguna, Rika Ampuh

2017-11-01

Supply chain of cooking oil is a network of companies from palm oil as raw material to retailers which work to create the value and deliver products into the end consumers. This paper is aimed to study key success factors based on consumer's perspective as the last stage in the supply chain. Consumers who are examined in this study are restaurants management or owners. Restaurant is the biggest consumption of cooking oil. The factors is studied based on Supply Chain Operation Reference (SCOR) version 10.0. Factors used are formulated based on the third-level metrics of SCOR Model. Factors are analyzed using factors analysis. This study found factors which become key success factors in managing supply chain of cooking oil encompass reliability, responsiveness and agility. Key success factors can be applied by governments as policy making and cooking oil companies as formulation of the distribution strategies.

A stochastic inventory management model for a dual sourcing supply chain with disruptions

NASA Astrophysics Data System (ADS)

Iakovou, Eleftherios; Vlachos, Dimitrios; Xanthopoulos, Anastasios

2010-03-01

As companies continue to globalise their operations and outsource significant portion of their value chain activities, they often end up relying heavily on order replenishments from distant suppliers. The explosion in long-distance sourcing is exposing supply chains and shareholder value at ever increasing operational and disruption risks. It is well established, both in academia and in real-world business environments, that resource flexibility is an effective method for hedging against supply chain disruption risks. In this contextual framework, we propose a single period stochastic inventory decision-making model that could be employed for capturing the trade-off between inventory policies and disruption risks for an unreliable dual sourcing supply network for both the capacitated and uncapacitated cases. Through the developed model, we obtain some important managerial insights and evaluate the merit of contingency strategies in managing uncertain supply chains.

Price competition and equilibrium analysis in multiple hybrid channel supply chain

NASA Astrophysics Data System (ADS)

Kuang, Guihua; Wang, Aihu; Sha, Jin

2017-06-01

The amazing boom of Internet and logistics industry prompts more and more enterprises to sell commodity through multiple channels. Such market conditions make the participants of multiple hybrid channel supply chain compete each other in traditional and direct channel at the same time. This paper builds a two-echelon supply chain model with a single manufacturer and a single retailer who both can choose different channel or channel combination for their own sales, then, discusses the price competition and calculates the equilibrium price under different sales channel selection combinations. Our analysis shows that no matter the manufacturer and retailer choose same or different channel price to compete, the equilibrium price does not necessarily exist the equilibrium price in the multiple hybrid channel supply chain and wholesale price change is not always able to coordinate supply chain completely. We also present the sufficient and necessary conditions for the existence of equilibrium price and coordination wholesale price.

Air Quality Impacts of Increased Use of Ethanol under the United States' Energy Independence and Security Act

EPA Science Inventory

Increased use of ethanol in the United States fuel supply will impact emissions and ambient concentrations of greenhouse gases, “criteria” pollutants for which the U. S. EPA sets ambient air quality standards, and a variety of air toxic compounds. This paper focuses on impacts of...

9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

Code of Federal Regulations, 2014 CFR

2014-01-01

... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

Code of Federal Regulations, 2013 CFR

2013-01-01

... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

Code of Federal Regulations, 2012 CFR

2012-01-01

... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

Hybrid modeling and empirical analysis of automobile supply chain network

NASA Astrophysics Data System (ADS)

Sun, Jun-yan; Tang, Jian-ming; Fu, Wei-ping; Wu, Bing-ying

2017-05-01

Based on the connection mechanism of nodes which automatically select upstream and downstream agents, a simulation model for dynamic evolutionary process of consumer-driven automobile supply chain is established by integrating ABM and discrete modeling in the GIS-based map. Firstly, the rationality is proved by analyzing the consistency of sales and changes in various agent parameters between the simulation model and a real automobile supply chain. Second, through complex network theory, hierarchical structures of the model and relationships of networks at different levels are analyzed to calculate various characteristic parameters such as mean distance, mean clustering coefficients, and degree distributions. By doing so, it verifies that the model is a typical scale-free network and small-world network. Finally, the motion law of this model is analyzed from the perspective of complex self-adaptive systems. The chaotic state of the simulation system is verified, which suggests that this system has typical nonlinear characteristics. This model not only macroscopically illustrates the dynamic evolution of complex networks of automobile supply chain but also microcosmically reflects the business process of each agent. Moreover, the model construction and simulation of the system by means of combining CAS theory and complex networks supplies a novel method for supply chain analysis, as well as theory bases and experience for supply chain analysis of auto companies.

The Supply Chain’s Role in Improving Animal Welfare

PubMed Central

Harvey, David; Hubbard, Carmen

2013-01-01

Simple Summary The ability of supply chains to deliver high(er) levels and standards of animal welfare is subject to two critical conditions: (a) the innovative and adaptive capacity of actors in the chain to respond to society’s demands; (b) consumers actually buying animal-friendly products. Unless citizens are willing to support suppliers who comply with high(er) standards, their votes for better animal welfare risk exporting poor animal welfare to other countries with less rigorous standards. The logic of market failure in the case of animal welfare points to the superiority of consumer subsidies over producer subsidies to deliver improved animal welfare. Abstract Supply chains are already incorporating citizen/consumer demands for improved animal welfare, especially through product differentiation and the associated segmentation of markets. Nonetheless, the ability of the chain to deliver high(er) levels and standards of animal welfare is subject to two critical conditions: (a) the innovative and adaptive capacity of the chain to respond to society’s demands; (b) the extent to which consumers actually purchase animal-friendly products. Despite a substantial literature reporting estimates of willingness to pay (WTP) for animal welfare, there is a belief that in practice people vote for substantially more and better animal welfare as citizens than they are willing to pay for as consumers. This citizen-consumer gap has significant consequences on the supply chain, although there is limited literature on the capacity and willingness of supply chains to deliver what the consumer wants and is willing to pay for. This paper outlines an economic analysis of supply chain delivery of improved standards for farm animal welfare in the EU and illustrates the possible consequences of improving animal welfare standards for the supply chain using a prototype belief network analysis. PMID:26479533

A Risk Management Method for the Operation of a Supply-Chain without Storage:

NASA Astrophysics Data System (ADS)

Kobayashi, Yasuhiro; Manabe, Yuuji; Nakata, Norimasa; Kusaka, Satoshi

A business risk management method has been developed for a supply-chain without a storage function under demand uncertainty. Power supply players in the deregulated power market face the need to develop the best policies for power supply from self-production and reserved purchases to balance demand, which is predictable with error. The proposed method maximizes profit from the operation of the supply-chain under probabilistic demand uncertainty on the basis of a probabilistic programming approach. Piece-wise linear functions are employed to formulate the impact of under-booked or over-booked purchases on the supply cost, and constraints on over-demand probability are introduced to limit over-demand frequency on the basis of the demand probability distribution. The developed method has been experimentally applied to the supply policy of a power-supply-chain, the operation of which is based on a 3-stage pricing purchase contract and on 28 time zones. The characteristics of the obtained optimal supply policy are successfully captured in the numerical results, which suggest the applicability of the proposed method.

Mitochondria-targeted ubiquinone (MitoQ) decreases ethanol-dependent micro and macro hepatosteatosis.

PubMed

Chacko, Balu K; Srivastava, Anup; Johnson, Michelle S; Benavides, Gloria A; Chang, Mi Jung; Ye, Yaozu; Jhala, Nirag; Murphy, Michael P; Kalyanaraman, Balaraman; Darley-Usmar, Victor M

2011-07-01

Chronic alcohol-induced liver disease results in inflammation, steatosis, and increased oxidative and nitrosative damage to the mitochondrion. We hypothesized that targeting an antioxidant to the mitochondria would prevent oxidative damage and attenuate the steatosis associated with alcoholic liver disease. To test this we investigated the effects of mitochondria-targeted ubiquinone (MitoQ) (5 and 25 mg/kg/day for 4 weeks) in male Sprague-Dawley rats consuming ethanol using the Lieber-DeCarli diet with pair-fed controls. Hepatic steatosis, 3-nitrotyrosine (3-NT), 4-hydroxynonenal (4-HNE), hypoxia inducible factor α (HIF1α), and the activity of the mitochondrial respiratory chain complexes were assessed. As reported previously, ethanol consumption resulted in hepatocyte ballooning, increased lipid accumulation in the form of micro and macrovesicular steatosis, and induction of cytochrome P450 2E1 (CYP2E1). MitoQ had a minor effect on the ethanol-dependent decrease in mitochondrial respiratory chain proteins and their activities; however, it did decrease hepatic steatosis in ethanol-consuming animals and prevented the ethanol-induced formation of 3-NT and 4-HNE. Interestingly, MitoQ completely blocked the increase in HIF1α in all ethanol-fed groups, which has previously been demonstrated in cell culture models and shown to be essential in ethanol-dependent hepatosteatosis. These results demonstrate the antioxidant capacity of MitoQ in alleviating alcohol-associated mitochondrial reactive oxygen species (ROS) and several downstream effects of ROS/RNS (reactive nitrogen species) production such as inhibiting protein nitration and protein aldehyde formation and specifically ROS-dependent HIF1α stabilization. Copyright © 2011 American Association for the Study of Liver Diseases.

Future Supply Chains Enabled by Continuous Processing-Opportunities Challenges May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

An RFID-Based Smart Structure for the Supply Chain: Resilient Scanning Proofs and Ownership Transfer with Positive Secrecy Capacity Channels.

PubMed

Burmester, Mike; Munilla, Jorge; Ortiz, Andrés; Caballero-Gil, Pino

2017-07-04

The National Strategy for Global Supply Chain Security published in 2012 by the White House identifies two primary goals for strengthening global supply chains: first, to promote the efficient and secure movement of goods, and second to foster a resilient supply chain. The Internet of Things (IoT), and in particular Radio Frequency Identification (RFID) technology, can be used to realize these goals. For product identification, tracking and real-time awareness, RFID tags are attached to goods. As tagged goods move along the supply chain from the suppliers to the manufacturers, and then on to the retailers until eventually they reach the customers, two major security challenges can be identified: (I) to protect the shipment of goods that are controlled by potentially untrusted carriers; and (II) to secure the transfer of ownership at each stage of the chain. For the former, grouping proofs in which the tags of the scanned goods generate a proof of "simulatenous" presence can be employed, while for the latter, ownership transfer protocols (OTP) are used. This paper describes enhanced security solutions for both challenges. We first extend earlier work on grouping proofs and group codes to capture resilient group scanning with untrusted readers; then, we describe a modified version of a recently published OTP based on channels with positive secrecy capacity adapted to be implemented on common RFID systems in the supply chain. The proposed solutions take into account the limitations of low cost tags employed in the supply chain, which are only required to generate pseudorandom numbers and compute one-way hash functions.

Distribution and Supply Chain Management: Educating the Army Officer

DTIC Science & Technology

2005-05-26

knowledge a logistics officer must have to function effectively in a supply chain and distribution management environment. It analyzes how officers...Educational Objectives. It discusses how the Army/DoD currently teaches supply chain and distribution management concepts in various programs, such as the...its educational curriculum, and that logisticians continue to gain operational experience in distribution management operations. The paper recommends

Simulation modelling of central order processing system under resource sharing strategy in demand-driven garment supply chains

NASA Astrophysics Data System (ADS)

Ma, K.; Thomassey, S.; Zeng, X.

2017-10-01

In this paper we proposed a central order processing system under resource sharing strategy for demand-driven garment supply chains to increase supply chain performances. We examined this system by using simulation technology. Simulation results showed that significant improvement in various performance indicators was obtained in new collaborative model with proposed system.

Defining the Synthetic Biology Supply Chain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frazar, Sarah L.; Hund, Gretchen E.; Bonheyo, George T.

In this article, a team of experts in synthetic biology, data analytics, and national security describe the overall supply chain surrounding synthetic biology. The team analyzes selected interactions within that network to better understand the risks raised by synthetic biology and identifies opportunities for risk mitigation. To introduce the concept, the article will briefly describe how an understanding of supply chains has been important in promoting nuclear nonproliferation objectives. The article concludes by assessing the structure and networks identified in the supply chains to reveal potential opportunities for future biodefense research and development; options for additional information exchange; and meansmore » to interdict, detect, or deter suspicious activity.« less

Multilayered complex network datasets for three supply chain network archetypes on an urban road grid.

PubMed

Viljoen, Nadia M; Joubert, Johan W

2018-02-01

This article presents the multilayered complex network formulation for three different supply chain network archetypes on an urban road grid and describes how 500 instances were randomly generated for each archetype. Both the supply chain network layer and the urban road network layer are directed unweighted networks. The shortest path set is calculated for each of the 1 500 experimental instances. The datasets are used to empirically explore the impact that the supply chain's dependence on the transport network has on its vulnerability in Viljoen and Joubert (2017) [1]. The datasets are publicly available on Mendeley (Joubert and Viljoen, 2017) [2].

Modelling a flows in supply chain with analytical models: Case of a chemical industry

NASA Astrophysics Data System (ADS)

Benhida, Khalid; Azougagh, Yassine; Elfezazi, Said

2016-02-01

This study is interested on the modelling of the logistics flows in a supply chain composed on a production sites and a logistics platform. The contribution of this research is to develop an analytical model (integrated linear programming model), based on a case study of a real company operating in the phosphate field, considering a various constraints in this supply chain to resolve the planning problems for a better decision-making. The objectives of this model is to determine and define the optimal quantities of different products to route, to and from the various entities in the supply chain studied.

The Complex Economic System of Supply Chain Financing

NASA Astrophysics Data System (ADS)

Zhang, Lili; Yan, Guangle

Supply Chain Financing (SCF) refers to a series of innovative and complicated financial services based on supply chain. The SCF set-up is a complex system, where the supply chain management and Small and Medium Enterprises (SMEs) financing services interpenetrate systematically. This paper establishes the organization structure of SCF System, and presents two financing models respectively, with or without the participation of the third-party logistic provider (3PL). Using Information Economics and Game Theory, the interrelationship among diverse economic sectors is analyzed, and the economic mechanism of development and existent for SCF system is demonstrated. New thoughts and approaches to solve SMEs financing problem are given.

Demand Activated Manufacturing Architecture (DAMA) model for supply chain collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHAPMAN,LEON D.; PETERSEN,MARJORIE B.

The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise architecture and collaborative model for supply chains. This model will enable improved collaborative business across any supply chain. The DAMA Model for Supply Chain Collaboration is a high-level model for collaboration to achieve Demand Activated Manufacturing. The five major elements of the architecture to support collaboration are (1) activity or process, (2) information, (3) application, (4) data, and (5) infrastructure. These five elements are tied to the application of themore » DAMA architecture to three phases of collaboration - prepare, pilot, and scale. There are six collaborative activities that may be employed in this model: (1) Develop Business Planning Agreements, (2) Define Products, (3) Forecast and Plan Capacity Commitments, (4) Schedule Product and Product Delivery, (5) Expedite Production and Delivery Exceptions, and (6) Populate Supply Chain Utility. The Supply Chain Utility is a set of applications implemented to support collaborative product definition, forecast visibility, planning, scheduling, and execution. The DAMA architecture and model will be presented along with the process for implementing this DAMA model.« less

Extending the "Knowledge Advantage": Creating Learning Chains

ERIC Educational Resources Information Center

Maqsood, Tayyab; Walker, Derek; Finegan, Andrew

2007-01-01

Purpose: The purpose of this paper is to develop a synergy between the approaches of knowledge management in a learning organisation and supply chain management so that learning chains can be created in order to unleash innovation and creativity by managing knowledge in supply chains. Design/methodology/approach: Through extensive literature…

Can ethanol alone meet California's low carbon fuel standard? An evaluation of feedstock and conversion alternatives

NASA Astrophysics Data System (ADS)

Zhang, Yimin; Joshi, Satish; MacLean, Heather L.

2010-01-01

The feasibility of meeting California's low carbon fuel standard (LCFS) using ethanol from various feedstocks is assessed. Lifecycle greenhouse gas (GHG) emissions, direct agricultural land use, petroleum displacement directly due to ethanol blending, and production costs for a number of conventional and lignocellulosic ethanol pathways are estimated under various supply scenarios. The results indicate that after considering indirect land use effects, all sources of ethanol examined, except Midwest corn ethanol, are viable options to meet the LCFS. However, the required ethanol quantity depends on the GHG emissions performance and ethanol availability. The quantity of ethanol that can be produced from lignocellulosic biomass resources within California is insufficient to meet the year 2020 LCFS target. Utilizing lignocellulosic ethanol to meet the LCFS is more attractive than utilizing Brazilian sugarcane ethanol due to projected lower direct agricultural land use, dependence on imported energy, ethanol cost, required refueling infrastructure modifications and penetration of flexible fuel E85 vehicles. However, advances in cellulosic ethanol technology and commercial production capacity are required to support moderate- to large-scale introduction of low carbon intensity cellulosic ethanol. Current cellulosic ethanol production cost estimates suffer from relatively high uncertainty and need to be refined based on commercial scale production data when available.

Natural Hazards and Supply Chain Disruptions

NASA Astrophysics Data System (ADS)

Haraguchi, M.

2016-12-01

Natural hazards distress the global economy through disruptions in supply chain networks. Moreover, despite increasing investment to infrastructure for disaster risk management, economic damages and losses caused by natural hazards are increasing. Manufacturing companies today have reduced inventories and streamlined logistics in order to maximize economic competitiveness. As a result, today's supply chains are profoundly susceptible to systemic risks, which are the risk of collapse of an entire network caused by a few node of the network. For instance, the prolonged floods in Thailand in 2011 caused supply chain disruptions in their primary industries, i.e. electronic and automotive industries, harming not only the Thai economy but also the global economy. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and the Earthquake in Kumamoto Japan in 2016. This study attempts to discover what kind of effective measures are available for private companies to manage supply chain disruptions caused by floods. It also proposes a method to estimate potential risks using a Bayesian network. The study uses a Bayesian network to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains such as logistics, multiple layers of suppliers, warehouses, and consumer markets. Considering situations across different times, our study shows desirable data requirements for the analysis and effective measures to improve Value at Risk (VaR) for private enterprises and supply chains.

Inhibition of long myosin light-chain kinase activation alleviates intestinal damage after binge ethanol exposure and burn injury

PubMed Central

Zahs, Anita; Bird, Melanie D.; Ramirez, Luis; Turner, Jerrold R.; Choudhry, Mashkoor A.

2012-01-01

Laboratory evidence suggests that intestinal permeability is elevated following either binge ethanol exposure or burn injury alone, and this barrier dysfunction is further perturbed when these insults are combined. We and others have previously reported a rise in both systemic and local proinflammatory cytokine production in mice after the combined insult. Knowing that long myosin light-chain kinase (MLCK) is important for epithelial barrier maintenance and can be activated by proinflammatory cytokines, we examined whether inhibition of MLCK alleviated detrimental intestinal responses seen after ethanol exposure and burn injury. To accomplish this, mice were given vehicle or a single binge ethanol exposure followed by a sham or dorsal scald burn injury. Following injury, one group of mice received membrane permeant inhibitor of MLCK (PIK). At 6 and 24 h postinjury, bacterial translocation and intestinal levels of proinflammatory cytokines were measured, and changes in tight junction protein localization and total intestinal morphology were analyzed. Elevated morphological damage, ileal IL-1β and IL-6 levels, and bacterial translocation were seen in mice exposed to ethanol and burn injury relative to either insult alone. This increase was not seen in mice receiving PIK after injury. Ethanol-exposed and burn-injured mice had reduced zonula occludens protein-1 and occludin localization to the tight junction relative to sham-injured mice. However, the observed changes in junctional complexes were not seen in our PIK-treated mice following the combined insult. These data suggest that MLCK activity may promote morphological and inflammatory responses in the ileum following ethanol exposure and burn injury. PMID:22790598

Helping the Warfighter Become Green! (Briefing Charts)

DTIC Science & Technology

2011-02-01

CHAIN LEADERSHIPARFIGHTER-FOCUSED, GLOBALLY RESPONSIVE, FISCALLY RESPONSIBLE SUPPLY CHAIN LEADERSHIP DOD EMALL DOD’s Online Shopping Tool • Web self...LEADERSHIP DOD EMALL DOD’s Online Shopping Tool WARFIGHTER FOCUSED, GLOBALLY RESPONSIVE SUPPLY CHAIN LEADERSHIPARFIGHTER FOCUSED, GLOBALLY RESPONSIVE

An Agent-Based Modeling Approach for Determining Corn Stover Removal Rate and Transboundary Effects

NASA Astrophysics Data System (ADS)

Gan, Jianbang; Langeveld, J. W. A.; Smith, C. T.

2014-02-01

Bioenergy production involves different agents with potentially different objectives, and an agent's decision often has transboundary impacts on other agents along the bioenergy value chain. Understanding and estimating the transboundary impacts is essential to portraying the interactions among the different agents and in the search for the optimal configuration of the bioenergy value chain. We develop an agent-based model to mimic the decision making by feedstock producers and feedstock-to-biofuel conversion plant operators and propose multipliers (i.e., ratios of economic values accruing to different segments and associated agents in the value chain) for assessing the transboundary impacts. Our approach is generic and thus applicable to a variety of bioenergy production systems at different sites and geographic scales. We apply it to the case of producing ethanol using corn stover in Iowa, USA. The results from the case study indicate that stover removal rate is site specific and varies considerably with soil type, as well as other factors, such as stover price and harvesting cost. In addition, ethanol production using corn stover in the study region would have strong positive ripple effects, with the values of multipliers varying with greenhouse gas price and national energy security premium. The relatively high multiplier values suggest that a large portion of the value associated with corn stover ethanol production would accrue to the downstream end of the value chain instead of stover producers.

Oxygenate Supply/Demand Balances in the Short-Term Integrated Forecasting Model (Short-Term Energy Outlook Supplement March 1998)

EIA Publications

1998-01-01

The blending of oxygenates, such as fuel ethanol and methyl tertiary butyl ether (MTBE), into motor gasoline has increased dramatically in the last few years because of the oxygenated and reformulated gasoline programs. Because of the significant role oxygenates now have in petroleum product markets, the Short-Term Integrated Forecasting System (STIFS) was revised to include supply and demand balances for fuel ethanol and MTBE. The STIFS model is used for producing forecasts in the Short-Term Energy Outlook. A review of the historical data sources and forecasting methodology for oxygenate production, imports, inventories, and demand is presented in this report.

Developing Students' Understanding of Co-Opetition and Multilevel Inventory Management Strategies in Supply Chains: An In-Class Spreadsheet Simulation Exercise

ERIC Educational Resources Information Center

Fetter, Gary; Shockley, Jeff

2014-01-01

Instructors look for ways to explain to students how supply chains can be constructed so that competing suppliers can work together to improve inventory management performance (i.e., a phenomenon known as co-opetition). An Excel spreadsheet-driven simulation is presented that models a complete multilevel supply chain system--customer, retailer,…

The Multidisciplinary Nature of Supply Chain Management: Where Does It Fit in Business Education?

ERIC Educational Resources Information Center

Jones, Michael A.; Cope, Robert; Budden, Michael C.

2009-01-01

Supply chain management is an area of growing interest in both industry and academics. A number of new text books are available for courses in the area, and a number of Colleges of Business are adding relevant curriculum. However, questions arise as to what Supply Chain Management comprises, as to needed courses in the area, and an appropriate…

Foreign Military Sales: A Historical Review of Argentina’s Purchases

DTIC Science & Technology

2013-03-01

Management Science, 2009. 3. Douglas M Lambert, “ Supply Chain Management Processes, Partnership, Performance”, Third Edition, 2008. 4. Sunil Chopra...Science in Logistics and Supply Chain Management Juan E. Perot, MBA LtCol, AAF March 2013 APPROVED FOR PUBLIC RELEASE; DISTRIBUTION...ago, and they manage various purchasing activities in each year for several systems. Therefore a particular and specific Supply Chain

Stop the supply chain insanity. Retail as a model for hospitals.

PubMed

Belkoski, David A

2008-04-01

The healthcare supply chain has yet to embrace any single industrywide source for synchronized product data. A synchronized product data system is a keystone in other multibillion-dollar markets. University Health Care System (UHCS), Augusta, Ga., developed a pilot program that demonstrates the benefits of data standardization and synchronization and enabled the system to recognize productivity gains in the supply chain.

Improving Department of Defense Global Distribution Performance Through Network Analysis

DTIC Science & Technology

2016-06-01

network performance increase. 14. SUBJECT TERMS supply chain metrics, distribution networks, requisition shipping time, strategic distribution database...peace and war” (p. 4). USTRANSCOM Metrics and Analysis Branch defines, develops, tracks, and maintains outcomes- based supply chain metrics to...2014a, p. 8). The Joint Staff defines a TDD standard as the maximum number of days the supply chain can take to deliver requisitioned materiel

Conceptual Model of Supply Chain Structure Mapping - A Case of Subsidized LPG Commodity in Yogyakarta

NASA Astrophysics Data System (ADS)

Sulistio, Joko; Thoif, Afifuddin; Fitri Alindira, Aulia

2016-01-01

— In 2007, the government launched a conversion program of kerosene to LPG by issuing a Presidential Regulation No. 104/2007 on Supply, Distribution and Pricing LPG 3 Kg. Article 2 on the regulation says that setting the supply, distribution, and pricing of LPG 3 Kg include planning an annual sales volume of enterprises, the reference price and the retail price and conditions of export and import of LPG 3 Kg in order to reduce subsidies Kerosene especially to divert the use of kerosene according to government policy. In principle, the purpose of this policy is to reduce energy subsidies on commodities, especially Kerosene. Although the government claimed the conversion program is success, there are few problems arising from conversion program. In 2014, many scarcity and high price of LPG 3 Kg were reported. In this case, Pertamina was given full authority to manage all supply chain and distribution. Because the root of the problem of scarcity that occurred in the supply chain system has not been explained, the proposed solutions will also be partial and not comprehensive. Thus, this research will build a structural map of the causes of supply chain system LPG 3 Kg, as well as providing a comprehensive picture of system dynamics of LPG 3 Kg supply chain system which applied in Indonesia. And the result is expected as in form of Causal Loop Diagram of supply chain system.

Scaling up antiretroviral therapy in Uganda: using supply chain management to appraise health systems strengthening

PubMed Central

2011-01-01

Background Strengthened national health systems are necessary for effective and sustained expansion of antiretroviral therapy (ART). ART and its supply chain management in Uganda are largely based on parallel and externally supported efforts. The question arises whether systems are being strengthened to sustain access to ART. This study applies systems thinking to assess supply chain management, the role of external support and whether investments create the needed synergies to strengthen health systems. Methods This study uses the WHO health systems framework and examines the issues of governance, financing, information, human resources and service delivery in relation to supply chain management of medicines and the technologies. It looks at links and causal chains between supply chain management for ART and the national supply system for essential drugs. It combines data from the literature and key informant interviews with observations at health service delivery level in a study district. Results Current drug supply chain management in Uganda is characterized by parallel processes and information systems that result in poor quality and inefficiencies. Less than expected health system performance, stock outs and other shortages affect ART and primary care in general. Poor performance of supply chain management is amplified by weak conditions at all levels of the health system, including the areas of financing, governance, human resources and information. Governance issues include the lack to follow up initial policy intentions and a focus on narrow, short-term approaches. Conclusion The opportunity and need to use ART investments for an essential supply chain management and strengthened health system has not been exploited. By applying a systems perspective this work indicates the seriousness of missing system prerequisites. The findings suggest that root causes and capacities across the system have to be addressed synergistically to enable systems that can match and accommodate investments in disease-specific interventions. The multiplicity and complexity of existing challenges require a long-term and systems perspective essentially in contrast to the current short term and program-specific nature of external assistance. PMID:21806826

Pharmaceutical supply chain risks: a systematic review.

PubMed

Jaberidoost, Mona; Nikfar, Shekoufeh; Abdollahiasl, Akbar; Dinarvand, Rassoul

2013-12-19

Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies.

Factors influencing the choice of performance measures for the oil and gas supply chain – exploratory study

NASA Astrophysics Data System (ADS)

Menhat, Masha; Yusuf, Y.

2018-04-01

The current value of the oil price per barrel has severely impacted the oil and gas industry around the world. This has worsened the situation due to the fact that it has long been the backbone of the country through the energy supply, employability and also its role as the major economic contributor. Due to multiple external factors that affect this industry such as crude oil availability, oil price fluctuation, high transportation cost, as well as exposure to high uncertainties, it is sensible for the supply chain practitioner to shift their focus in managing their resources and capabilities. To maximise the potential of supply chain activities in improving overall company performance, it is important to pay extra attention on their performance management. This includes the design of meaningful performance measurement framework to assess organisational performance. This study will explore the influencing factors in choosing performance measures for the oil and gas supply chain. Five in-depth interviews were conducted with supply chain experts within the industry. Eight influencing factors have been identified through the interviews.

Interaction of dipalmitoyl phosphatidylserine with ethanol: induction of an ordered gel phase at room temperature.

PubMed

Wachtel, E; Bach, D; Miller, I R; Borochov, N

2007-05-01

Using differential scanning calorimetry and small and wide-angle X-ray diffraction, we show that, unlike the saturated phosphatidylcholines, for which ethanol induces chain interdigitation in the gel state, and unlike natural phosphatidylserine in which the gel state is almost unaffected by the addition of ethanol, dipalmitoyl phosphatidylserine (DPPS) assumes an ordered structure after incubation at room temperature in the presence of as little as 5% (v/v) ethanol. In the liquid crystalline state, a progressive decrease in the interbilayer spacing is observed as a function of ethanol concentration, similar to what is found for natural phosphatidylserine (PS) and 1-palmitoyl-2-oleoyl-phosphatidylserine (POPS). The 0.37 molar fraction of cholesterol in the DPPS dispersion in the presence of 10% (v/v) ethanol, does not prevent the formation of the ordered gel.

Multiplicity in public health supply systems: a learning agenda.

PubMed

Bornbusch, Alan; Bates, James

2013-08-01

Supply chain integration-merging products for health programs into a single supply chain-tends to be the dominant model in health sector reform. However, multiplicity in a supply system may be justified as a risk management strategy that can better ensure product availability, advance specific health program objectives, and increase efficiency.

Supply Chain Modeling for Fluorspar and Hydroflouric Acid and Implications for Further Analyses

DTIC Science & Technology

2015-04-01

Critical Materials, Volume 1 Chapter 2. Fluorspar-HF Supply Chain 4 Foreign Supply Other usesUS Supply Fluorspar Mining HF Production Downstream...analysis are listed across the top: Fluorspar Mining , HF Production, and (pro- duction of) Downstream Products (using HF). • U.S. supply is represented by...material flows from fluorspar mining , to HF production, to downstream fluorine-containing products. – Black lines are material flows included in the supply

Dependence and power in healthcare equipment supply chains.

PubMed

de Jong, Jurriaan L; Benton, W C

2018-03-05

Most healthcare organizations (HCOs) engage Group Purchasing Organizations (GPOs) as an outsourcing strategy to secure their supplies and materials. When an HCO outsources the procurement function to a GPO, this GPO will directly interact with the HCO's supplier on the HCO's behalf. This study investigates how an HCO's dependence on a GPO affects supply chain relationships and power in the healthcare medical equipment supply chain. Hypotheses are tested through factor analysis and structural equation modeling, using primary survey data from HCO procurement managers. An HCO's dependence on a GPO is found to be positively associated with a GPO's reliance on mediated power, but, surprisingly, negatively associated with a GPO's mediated power. Furthermore, analysis indicates that an HCO's dependence on a GPO is positively associated with an HCO's dependence on a GPO-contracted Original Equipment Manufacturer (OEM). HCO reliance on GPOs may lead to a buyer's dependence trap, where HCOs are increasingly dependent on GPOs and OEMs. Implications for HCO procurement managers and recommended steps for mitigation are offered. Power-dependence relationships in the medical equipment supply chain are not consistent with relationships in other, more traditional, supply chains. While dependence in a supply chain relationship typically leads to an increase in reliance on mediated power, GPO-dependent HCOs instead perceive a decrease in GPO mediated power. Furthermore, HCOs that rely on procurement service from GPOs are increasingly dependent on the OEMs.

Mapping grasslands suitable for cellulosic biofuels in the Greater Platte River Basin, United States

USGS Publications Warehouse

Wylie, Bruce K.; Gu, Yingxin

2012-01-01

Biofuels are an important component in the development of alternative energy supplies, which is needed to achieve national energy independence and security in the United States. The most common biofuel product today in the United States is corn-based ethanol; however, its development is limited because of concerns about global food shortages, livestock and food price increases, and water demand increases for irrigation and ethanol production. Corn-based ethanol also potentially contributes to soil erosion, and pesticides and fertilizers affect water quality. Studies indicate that future potential production of cellulosic ethanol is likely to be much greater than grain- or starch-based ethanol. As a result, economics and policy incentives could, in the near future, encourage expansion of cellulosic biofuels production from grasses, forest woody biomass, and agricultural and municipal wastes. If production expands, cultivation of cellulosic feedstock crops, such as switchgrass (Panicum virgatum L.) and miscanthus (Miscanthus species), is expected to increase dramatically. The main objective of this study is to identify grasslands in the Great Plains that are potentially suitable for cellulosic feedstock (such as switchgrass) production. Producing ethanol from noncropland holdings (such as grassland) will minimize the effects of biofuel developments on global food supplies. Our pilot study area is the Greater Platte River Basin, which includes a broad range of plant productivity from semiarid grasslands in the west to the fertile corn belt in the east. The Greater Platte River Basin was the subject of related U.S. Geological Survey (USGS) integrated research projects.

Protective effects of hot spring water drinking and radon inhalation on ethanol-induced gastric mucosal injury in mice

PubMed Central

Etani, Reo; Kataoka, Takahiro; Kanzaki, Norie; Sakoda, Akihiro; Tanaka, Hiroshi; Ishimori, Yuu; Mitsunobu, Fumihiro; Taguchi, Takehito

2017-01-01

ABSTRACT Radon therapy using radon (222Rn) gas is classified into two types of treatment: inhalation of radon gas and drinking water containing radon. Although short- or long-term intake of spa water is effective in increasing gastric mucosal blood flow, and spa water therapy is useful for treating chronic gastritis and gastric ulcer, the underlying mechanisms for and precise effects of radon protection against mucosal injury are unclear. In the present study, we examined the protective effects of hot spring water drinking and radon inhalation on ethanol-induced gastric mucosal injury in mice. Mice inhaled radon at a concentration of 2000 Bq/m3 for 24 h or were provided with hot spring water for 2 weeks. The activity density of 222Rn ranged from 663 Bq/l (start point of supplying) to 100 Bq/l (end point of supplying). Mice were then orally administered ethanol at three concentrations. The ulcer index (UI), an indicator of mucosal injury, increased in response to the administration of ethanol; however, treatment with either radon inhalation or hot spring water inhibited the elevation in the UI due to ethanol. Although no significant differences in antioxidative enzymes were observed between the radon-treated groups and the non-treated control groups, lipid peroxide levels were significantly lower in the stomachs of mice pre-treated with radon or hot spring water. These results suggest that hot spring water drinking and radon inhalation inhibit ethanol-induced gastric mucosal injury. PMID:28498931

Alcohol-to-acid ratio and substrate concentration affect product structure in chain elongation reactions initiated by unacclimatized inoculum.

PubMed

Liu, Yuhao; Lü, Fan; Shao, Liming; He, Pinjing

2016-10-01

The objective of the study was to investigate whether the ratio of ethanol to acetate affects yield and product structure in chain elongation initiated by unacclimatized mixed cultures. The effect of varying the substrate concentration, while maintaining the same ratio of alcohol to acid, was also investigated. With a high substrate concentration, an alcohol to acid ratio >2:1 provided sufficient electron donor capacity for the chain elongation reaction. With an ethanol to acetate ratio of 3:1 (300mM total carbon), the highest n-caproate concentration (3033±98mg/L) was achieved during the stable phase of the reaction. A lower substrate concentration (150mM total carbon) gave a lower yield of products and led to reduced carbon transformation efficiency compared with other reaction conditions. The use of unacclimatized inoculum in chain elongation can produce significant amounts of odd-carbon-number carboxylates as a result of protein hydrolysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

Energy production, distribution, and pollution controls: Combining engineering and economic analysis to enhance efficiency and policy design

NASA Astrophysics Data System (ADS)

Perkis, David F.

Three published articles are presented which focus on enhancing various aspects of the energy supply chain. While each paper adopts a different methodology, all three combine engineering data and/or techniques with economic analysis to improve efficiency or policy design within energy markets. The first paper combines a chemical engineering plant design model with an economic assessment of product enhancements within an ethanol production facility. While a new chemical process is shown to achieve greater ethanol yields, the animal feed by-products are denatured and decrease in value due to the degradation of a key nutritional amino acid. Overall, yield increases outweigh any costs, providing additional value to firms adopting this process. The second paper uses a mixed integer linear model to assess the optimal location of cellulosic ethanol production facilities within the state of Indiana. Desired locations with low costs are linked to regions with high yield corn growth, as these areas provide an abundance of corn stover, a by-product of corn and a cellulosic source of ethanol. The third paper implements experimental economic methods to assess the effectiveness of policies intended to control prices in emissions permit markets. When utilizing reserve permit auctions as an alternative to setting explicit maximum prices, prices are elevated beyond the theoretical predictions of the model within the conditions of the experiment. The most likely cause of higher prices is the negotiating power provided to sellers by grandfathering permits as evidenced by higher than expected welfare gains to sellers. Before presenting the articles, a discussion is introduced regarding the role of assumptions used by economists. For each article, a key assumption is highlighted and the consequences of making a different assumption are provided. Whether the consequences are large or small, the benefits of elucidating our models with assumptions based on real world behaviors are clearly demonstrated.

Supply chain optimization: a practitioner's perspective on the next logistics breakthrough.

PubMed

Schlegel, G L

2000-08-01

The objective of this paper is to profile a practitioner's perspective on supply chain optimization and highlight the critical elements of this potential new logistics breakthrough idea. The introduction will briefly describe the existing distribution network, and business environment. This will include operational statistics, manufacturing software, and hardware configurations. The first segment will cover the critical success factors or foundations elements that are prerequisites for success. The second segment will give you a glimpse of a "working game plan" for successful migration to supply chain optimization. The final segment will briefly profile "bottom-line" benefits to be derived from the use of supply chain optimization as a strategy, tactical tool, and competitive advantage.

A study on pricing decision of supply chain based on fairness concern

NASA Astrophysics Data System (ADS)

Yang, Hongxiong; Sun, Xiongle

2017-03-01

The fairness concern is introduced into a closed-loop supply chain, which includes a manufacturer and a retailer. This paper study the effect of fairness concern on wholesale price, retail price, recycling prices, manufacturer profits and retails profits under two situation: only the manufacturer is fairness concern and only the retailer is fairness concern. Studies show that: Retailer's fairness concern will reduce the price of the wholesale price, while the retail price and the recycling price unchanged, which led to the retailer to get more supply chain profits. Manufacturers' fairness concerns will raise the wholesale price, thereby increasing the manufacturer's supply chain profit, and the retailer's profit is compromised.

A Framework of Multi Objectives Negotiation for Dynamic Supply Chain Model

NASA Astrophysics Data System (ADS)

Chai, Jia Yee; Sakaguchi, Tatsuhiko; Shirase, Keiichi

Trends of globalization and advances in Information Technology (IT) have created opportunity in collaborative manufacturing across national borders. A dynamic supply chain utilizes these advances to enable more flexibility in business cooperation. This research proposes a concurrent decision making framework for a three echelons dynamic supply chain model. The dynamic supply chain is formed by autonomous negotiation among agents based on multi agents approach. Instead of generating negotiation aspects (such as amount, price and due date) arbitrary, this framework proposes to utilize the information available at operational level of an organization in order to generate realistic negotiation aspect. The effectiveness of the proposed model is demonstrated by various case studies.

Internet-enabled collaborative agent-based supply chains

NASA Astrophysics Data System (ADS)

Shen, Weiming; Kremer, Rob; Norrie, Douglas H.

2000-12-01

This paper presents some results of our recent research work related to the development of a new Collaborative Agent System Architecture (CASA) and an Infrastructure for Collaborative Agent Systems (ICAS). Initially being proposed as a general architecture for Internet based collaborative agent systems (particularly complex industrial collaborative agent systems), the proposed architecture is very suitable for managing the Internet enabled complex supply chain for a large manufacturing enterprise. The general collaborative agent system architecture with the basic communication and cooperation services, domain independent components, prototypes and mechanisms are described. Benefits of implementing Internet enabled supply chains with the proposed infrastructure are discussed. A case study on Internet enabled supply chain management is presented.

Bursaphelenchus xylophilus is killed by homologues of 2-(1-undecyloxy)-1-ethanol

NASA Astrophysics Data System (ADS)

Kim, Junheon; Lee, Sang-Myeong; Park, Chung Gyoo

2016-07-01

2-(1-Undecyloxy)-1-ethanol, monochamol, is a male-produced aggregation pheromone of the Monochamus species, which are efficient vectors of the pine wood nematode (PWN), Bursaphelenchus xylophilus, which cause devastating damage to pines worldwide. The nematicidal activity of synthetic monochamol and its homologues (ROEtOH: R = C7-C13) were investigated to find potential alternatives to the currently used PWN control agents abamectin and emamectin. Compounds with C7-C13 chain length alkyl groups exhibited 100% nematicidal activity at a concentration of 1000 mg/L. At a concentration of 100 mg/L, 2-(1-nonyloxy)-1-ethanol (C9OEtOH), 2-(1-decyloxy)-1-ethanol (C10OEtOH), 2-(1-undecyloxy)-1-ethanol (C11OEtOH), and 2-(1-dodecyloxy)-1-ethanol (C12OEtOH) showed 100% nematicidal activity, but the others showed weaker activities. C11OEtOH showed similar nematicidal activity to abamectin in terms of LD90 values, which were 13.30 and 12.53 mg/L, respectively. However, C9OEtOH, C10OEtOH, and C12OEtOH (LC90 values: 53.63, 38.18, and 46.68 mg/L, respectively) were less effective than C11OEtOH and abamectin. These results indicate that monochamol could be an effective alternative agent against PWN. The relationship of insecticidal and nematicidal activity to different carbon chain lengths in compounds is discussed.

Mapping Risks of Indonesian Tuna Supply Chain

NASA Astrophysics Data System (ADS)

Karningsih, P. D.; Anggrahini, D.; Kurniati, N.; Suef, M.; Fachrur, A. R.; Syahroni, N.

2018-04-01

Due to its high economic value and is produced by many countries, Tuna is considered as one of the world’s popular fish. Demand for Tuna species are very high and it usually sells in three form: fresh, frozen or canned. Competition in Tuna trading is challengin with the potential risk of price and supply fluctuations. With recent focus of Indonesia government that see the future of Indonesia civilization depend on the oceans and as the three biggest Tuna producing country, Ministry of Marine Affairs and Fisheries should ensure sustainability and competitiveness of Indonesian tuna. Therefore, there is a great need to develop a proper and effective strategy to manage potential risks in Indonesian Tuna supply chain. This paper is aimed at identifying and mapping potential Tuna supply chain risks and its interrelationships that would assist government in determining proper strategies to manage Indonesian Tuna. A framework for identifying Tuna supply chain risks is proposed. Generic risk structure of Supply Chain Risk Identification System is adopted and modified to match with particular object, which is Indonesian Tuna. The proposed model consists of hierarchical and causal structure that encompass potential risks of Tuna supply chain operations from fishing, trading, processing and distribution. The causal structure consist of risk events and its risk agents which is the cause of risk events. To ensure the root cause of risk events are identified properly, five why’s analysis is utilized to obtain risk agents. This proposed model also captures risk interrelationship between internal and external environment of Tuna supply chain. Preliminary result of this study identifies 15 risk events and 13 risk factors on fishing and trading operations and maps their interrelationships.

An RFID-Based Smart Structure for the Supply Chain: Resilient Scanning Proofs and Ownership Transfer with Positive Secrecy Capacity Channels †

PubMed Central

Ortiz, Andrés

2017-01-01

The National Strategy for Global Supply Chain Security published in 2012 by the White House identifies two primary goals for strengthening global supply chains: first, to promote the efficient and secure movement of goods, and second to foster a resilient supply chain. The Internet of Things (IoT), and in particular Radio Frequency Identification (RFID) technology, can be used to realize these goals. For product identification, tracking and real-time awareness, RFID tags are attached to goods. As tagged goods move along the supply chain from the suppliers to the manufacturers, and then on to the retailers until eventually they reach the customers, two major security challenges can be identified: (I) to protect the shipment of goods that are controlled by potentially untrusted carriers; and (II) to secure the transfer of ownership at each stage of the chain. For the former, grouping proofs in which the tags of the scanned goods generate a proof of “simulatenous” presence can be employed, while for the latter, ownership transfer protocols (OTP) are used. This paper describes enhanced security solutions for both challenges. We first extend earlier work on grouping proofs and group codes to capture resilient group scanning with untrusted readers; then, we describe a modified version of a recently published OTP based on channels with positive secrecy capacity adapted to be implemented on common RFID systems in the supply chain. The proposed solutions take into account the limitations of low cost tags employed in the supply chain, which are only required to generate pseudorandom numbers and compute one-way hash functions. PMID:28677637

Competing for supply.

PubMed

Stolle, B

2001-02-01

The Internet was supposed to make it possible for anybody anywhere to get anything anytime. Instead, it's magnified suppliers' miscalculations into global shortages. But if the Net caused these supply chain woes, it's also the solution, says the CEO of a supply-chain software manufacturer.

A performance evaluation of ACO and SA TSP in a supply chain network

NASA Astrophysics Data System (ADS)

Rao, T. Srinivas

2017-07-01

Supply Chain management and E commerce business solutions are one of the prominent areas of active research. In our paper we have modelled a supply chain model which aggregates all the manufacturers requirement and the products are supplied to all the manufacturer through a common vehicle routing algorithm. An appropriate tsp has been constructed for all the manufacturers which determines the shortest route thru which the aggregated material can be supplied in the shortest possible time. In this paper we have solved the shortest route through constructing a Simulated annealing algorithm and Ant colony algorithm and their performance is evaluated.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method

PubMed Central

Chaharsooghi, S. K.; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis. PMID:27379267

Developing strategic planning of green supply chain in refinery CPO company

NASA Astrophysics Data System (ADS)

Hidayati, J.; Mumtaz, G.; Hasibuan, S.

2018-02-01

We are conducted a research at the company of the manufacturing CPO into cooking oil, margarine and materials of oleochemical industries. Today palm oil based industries are facing global challenges related to environmental issues. To against these challenges, it is necessary to have an environmentally friendly supply chain. However, the limited resource owned by the company requires the integrated environmental strategy with the company’s business strategy. The model is developed based on management orientation towards external pressure, internal key resources and competitive advantage that can be obtained as the decision factor. The decision-making method used is Analytical Network Process (ANP). The results obtained institutional pressure becomes the criterion with the greatest influence on green supply chain initiatives and sub criteria of customer desires and stakeholder integration having the most significant influence on green supply chain initiatives. There are five green alternative initiatives that can be done: green product design, greening upstream, greening production, greening downstream and greening post use. For green supply chain initiative, greening upstream is the best priority.

An improved spanning tree approach for the reliability analysis of supply chain collaborative network

NASA Astrophysics Data System (ADS)

Lam, C. Y.; Ip, W. H.

2012-11-01

A higher degree of reliability in the collaborative network can increase the competitiveness and performance of an entire supply chain. As supply chain networks grow more complex, the consequences of unreliable behaviour become increasingly severe in terms of cost, effort and time. Moreover, it is computationally difficult to calculate the network reliability of a Non-deterministic Polynomial-time hard (NP-hard) all-terminal network using state enumeration, as this may require a huge number of iterations for topology optimisation. Therefore, this paper proposes an alternative approach of an improved spanning tree for reliability analysis to help effectively evaluate and analyse the reliability of collaborative networks in supply chains and reduce the comparative computational complexity of algorithms. Set theory is employed to evaluate and model the all-terminal reliability of the improved spanning tree algorithm and present a case study of a supply chain used in lamp production to illustrate the application of the proposed approach.

Optimal design of supply chain network under uncertainty environment using hybrid analytical and simulation modeling approach

NASA Astrophysics Data System (ADS)

Chiadamrong, N.; Piyathanavong, V.

2017-12-01

Models that aim to optimize the design of supply chain networks have gained more interest in the supply chain literature. Mixed-integer linear programming and discrete-event simulation are widely used for such an optimization problem. We present a hybrid approach to support decisions for supply chain network design using a combination of analytical and discrete-event simulation models. The proposed approach is based on iterative procedures until the difference between subsequent solutions satisfies the pre-determined termination criteria. The effectiveness of proposed approach is illustrated by an example, which shows closer to optimal results with much faster solving time than the results obtained from the conventional simulation-based optimization model. The efficacy of this proposed hybrid approach is promising and can be applied as a powerful tool in designing a real supply chain network. It also provides the possibility to model and solve more realistic problems, which incorporate dynamism and uncertainty.

Robust optimization on sustainable biodiesel supply chain produced from waste cooking oil under price uncertainty.

PubMed

Zhang, Yong; Jiang, Yunjian

2017-02-01

Waste cooking oil (WCO)-for-biodiesel conversion is regarded as the "waste-to-wealthy" industry. This paper addresses the design of a WCO-for-biodiesel supply chain at both strategic and tactical levels. The supply chain of this problem is studied, which is based on a typical mode of the waste collection (from restaurants' kitchen) and conversion in the cities. The supply chain comprises three stakeholders: WCO supplier, integrated bio-refinery and demand zone. Three key problems should be addressed for the optimal design of the supply chain: (1) the number, sizes and locations of bio-refinery; (2) the sites and amount of WCO collected; (3) the transportation plans of WCO and biodiesel. A robust mixed integer linear model with muti-objective (economic, environmental and social objectives) is proposed for these problems. Finally, a large-scale practical case study is adopted based on Suzhou, a city in the east of China, to verify the proposed models. Copyright © 2016 Elsevier Ltd. All rights reserved.

A supply chain contract with flexibility as a risk-sharing mechanism for demand forecasting

NASA Astrophysics Data System (ADS)

Kim, Whan-Seon

2013-06-01

Demand forecasting is one of the main causes of the bullwhip effect in a supply chain. As a countermeasure for demand uncertainty as well as a risk-sharing mechanism for demand forecasting in a supply chain, this article studies a bilateral contract with order quantity flexibility. Under the contract, the buyer places orders in advance for the predetermined horizons and makes minimum purchase commitments. The supplier, in return, provides the buyer with the flexibility to adjust the order quantities later, according to the most updated demand information. To conduct comparative simulations, four-echelon supply chain models, that employ the contracts and different forecasting techniques under dynamic market demands, are developed. The simulation outcomes show that demand fluctuation can be effectively absorbed by the contract scheme, which enables better inventory management and customer service. Furthermore, it has been verified that the contract scheme under study plays a role as an effective coordination mechanism in a decentralised supply chain.

The Analysis of Rush Orders Risk in Supply Chain: A Simulation Approach

NASA Technical Reports Server (NTRS)

Mahfouz, Amr; Arisha, Amr

2011-01-01

Satisfying customers by delivering demands at agreed time, with competitive prices, and in satisfactory quality level are crucial requirements for supply chain survival. Incidence of risks in supply chain often causes sudden disruptions in the processes and consequently leads to customers losing their trust in a company's competence. Rush orders are considered to be one of the main types of supply chain risks due to their negative impact on the overall performance, Using integrated definition modeling approaches (i.e. IDEF0 & IDEF3) and simulation modeling technique, a comprehensive integrated model has been developed to assess rush order risks and examine two risk mitigation strategies. Detailed functions sequence and objects flow were conceptually modeled to reflect on macro and micro levels of the studied supply chain. Discrete event simulation models were then developed to assess and investigate the mitigation strategies of rush order risks, the objective of this is to minimize order cycle time and cost.

Applying the Heuristic to the Risk Assessment within the Automotive Industry Supply Chain

NASA Astrophysics Data System (ADS)

Marasova, Daniela; Andrejiova, Miriam; Grincova, Anna

2017-03-01

Risk management facilitates risk identification, evaluation, control, and by means of appropriate set of measures, risk reduction or complete elimination. Therefore, the risk management becomes a strategic factor for a company's success. Properly implemented risk management system does not represent a tool to avoid the risk; it is used to understand the risk and provide the bases for strategic decision-making. Risk management represents a key factor for the supply chain operations. Managing the risks is crucial for achieving the customer satisfaction and thus also a company's success. The subject-matter of the article is the assessment of the supply chain in the automobile industry, in terms of risks. The topicality of this problem is even higher, as after the economic crisis it is necessary to revaluate the readiness of the supply chain for prospective risk conditions. One advantage of this article is the use of the Saaty method as a tool for the risk management within the supply chain.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method.

PubMed

Chaharsooghi, S K; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis.

An approach for formalising the supply chain operations

NASA Astrophysics Data System (ADS)

Zdravković, Milan; Panetto, Hervé; Trajanović, Miroslav; Aubry, Alexis

2011-11-01

Reference models play an important role in the knowledge management of the various complex collaboration domains (such as supply chain networks). However, they often show a lack of semantic precision and, they are sometimes incomplete. In this article, we present an approach to overcome semantic inconsistencies and incompleteness of the Supply Chain Operations Reference (SCOR) model and hence improve its usefulness and expand the application domain. First, we describe a literal web ontology language (OWL) specification of SCOR concepts (and related tools) built with the intention to preserve the original approach in the classification of process reference model entities, and hence enable the effectiveness of usage in original contexts. Next, we demonstrate the system for its exploitation, in specific - tools for SCOR framework browsing and rapid supply chain process configuration. Then, we describe the SCOR-Full ontology, its relations with relevant domain ontology and show how it can be exploited for improvement of SCOR ontological framework competence. Finally, we elaborate the potential impact of the presented approach, to interoperability of systems in supply chain networks.

Natural alcohol exposure: is ethanol the main substrate for alcohol dehydrogenases in animals?

PubMed

Hernández-Tobías, Aída; Julián-Sánchez, Adriana; Piña, Enrique; Riveros-Rosas, Héctor

2011-05-30

Alcohol dehydrogenase (ADH) activity is widely distributed in all phyla. In animals, three non-homologous NAD(P)(+)-dependent ADH protein families are reported. These arose independently throughout evolution and possess different structures and mechanisms of reaction: type I (medium-chain) ADHs are zinc-containing enzymes and comprise the most studied group in vertebrates; type II (short-chain) ADHs lack metal cofactor and have been extensively studied in Drosophila; and type III ADHs are iron-dependent/-activated enzymes that were initially identified only in microorganisms. The presence of these different ADHs in animals has been assumed to be a consequence of chronic exposure to ethanol. By far the most common natural source of ethanol is fermentation of fruit sugars by yeast, and available data support that this fruit trait evolved in concert with the characteristics of their frugivorous seed dispersers. Therefore, if the presence of ADHs in animals evolved as an adaptive response to dietary ethanol exposure, then it can be expected that the enzymogenesis of these enzymes began after the appearance of angiosperms with fleshy fruits, because substrate availability must precede enzyme selection. In this work, available evidence supporting this possibility is discussed. Phylogenetic analyses reveal that type II ADHs suffered several duplications, all of these restricted to flies (order Diptera). Induction of type II Adh by ethanol exposure, a positive correlation between ADH activity and ethanol resistance, and the fact that flies and type II Adh diversification occurred in concert with angiosperm diversification, strongly suggest that type II ADHs were recruited to allow larval flies to exploit new restricted niches with high ethanol content. In contrast, phyletic distribution of types I and III ADHs in animals showed that these appeared before angiosperms and land plants, independently of ethanol availability. Because these enzymes are not induced by ethanol exposure and possess a high affinity and/or catalytic efficiency for non-ethanol endogenous substrates, it can be concluded that the participation of types I and III ADHs in ethanol metabolism can be considered as incidental, and not adaptive. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Environmental Management Competitive Pressure Effect on SME Environmental Innovation Activities: A Green Supply Chain Perspective

NASA Astrophysics Data System (ADS)

Rashid, A. A.; Sidek, A. A.; Suffian, S. A.; Daud, M. R. C.

2018-01-01

The idea of assimilating green supply chain is to integrate and establish environmental management into the supply chain practices. The study aims to explore how environmental management competitive pressure influences a SME company in Malaysia to incorporate green supply chain integration, which is an efficient platform to develop environmental innovation. This study further advances green supply chain management research in Malaysia by using the method of quantitative analysis to analyze the model developed which data will be collected based on a sample of SMEs in Malaysia in manufacturing sector. The model developed in this study illustrates how environmental management competitive pressure from main competitors affects three fundamental dimensions of green supply chain integration. The research findings suggest that environmental management competitive pressure is a vital driving force for a SME company to incorporate internal and external collaboration in developing green product innovation. From the analysis conducted, the study strongly demonstrated that the best way for a company to counteract competitor’s environmental management success is to first implement strong internal green product development process then move to incorporate external environmental management innovation between their suppliers and customers. The findings also show that internal integration of green product innovation fully mediates the relationship of environmental management competitive pressure and the external integration of green product innovation.

Decision and coordination of low-carbon supply chain considering technological spillover and environmental awareness.

PubMed

Xu, Lang; Wang, Chuanxu; Li, Hui

2017-06-08

We focus on the impacts of technological spillovers and environmental awareness in a two-echelon supply chain with one-single supplier and one-single manufacturer to reduce carbon emission. In this supply chain, carbon abatement investment becomes one of key factors of cutting costs and improving profits, which is reducing production costs in the components and products-the investment from players in supply chain. On the basis of optimality theory, the centralized and decentralized models are respectively established to investigate the optimal decisions and profits. Further, setting the players' profits of the decentralized scenario as the disagreement points, we propose a bargaining-coordination contract through revenue-cost sharing to enhance the performance. Finally, by theoretical comparison and numerical analysis, the results show that: (i) The optimal profits of players and supply chain improve as technological spillovers and environmental awareness increase, and the profits of them in the bargaining-coordination contract are higher than that in the decentralized scenario; (ii) Technological spillovers between the players amplify the impact of "free-ride" behavior, in which the supplier always incentives the manufacturer to improve carbon emission intensity, but the cooperation will achieves and the profits will improve only when technological spillovers and environmental awareness are great; (iii) The contract can effectively achieve coordinated supply chain, and improve carbon abatement investment.

Developing a global health diplomacy supply chain--a viable option for the United States to curb extremism.

PubMed

Kumar, Sameer; Honkanen, Erik J; Karl, Chad C

2009-01-01

This study examines the idea of developing a global health diplomacy supply chain as an important foreign policy approach with the aim of improving the lives of vulnerable populations and serving the best interests of the United States. The study was based on the review of academic literature, news events, and military communiques, and historical writings were studied to determine the feasibility of the idea and the extent of costs and benefits of such an endeavor. An integrated strategic business model, supported by a medical care delivery process, was developed to create a framework for a feasible global health diplomacy supply chain. The findings indicate that extremism can be contained by creating and efficiently executing an effective supply chain to get medical care units to those that need them. The limitations are the potential exit strategies required, the tactical abilities, and diplomatic techniques needed in order to create positive diplomatic change in aid distribution. Managers must consider how supply chains will affect other organizations giving aid and the potential public response. Moreover, determining the level of care necessary to achieve the greatest positive health diplomacy continues to require vigilant scrutiny over the potential cost/benefit analysis. The analysis is valuable to policymakers considering the impacts of health diplomacy by utilizing supply chain management.

Could the Pharmaceutical Industry Benefit from Full-Scale Adoption of Radio-Frequency Identification (RFID) Technology with New Regulations?

PubMed

Coustasse, Alberto; Kimble, Craig A; Stanton, Robert B; Naylor, Mariah

2016-01-01

Healthcare regulators are directing attention to the pharmaceutical supply chain with the passage of the Drug Quality and Security Act (DQSA) and the Drug Supply Chain Security Act (DSCSA). Adoption of Radio-Frequency Identification (RFID) technology has the ability to improve compliance, reduce costs, and improve safety in the supply chain but its implementation has been limited; primarily because of hardware and tag costs. The purpose of this research study was to analyze the benefits to the pharmaceutical industry and healthcare system of the adoption of RFID technology as a result of newly implemented supply chain regulations. The methodology was a review following the steps of a systematic review with a total of 96 sources used. With the DSCSA, pharmaceutical companies must track and trace prescription drugs across the supply chain, and RFID can resolve many track-and-trace issues with manufacturer control of data. The practical implication of this study is that pharmaceutical companies must continue to have the potential to increase revenues, decrease associated costs, and increase compliance with new FDA regulations with RFID. Still, challenges related to regulatory statute wording, implementation of two-dimensional barcode technology, and the variety of interfaces within the pharmaceutical supply chain have delayed adoption and its full implementation.

Could the Pharmaceutical Industry Benefit from Full-Scale Adoption of Radio-Frequency Identification (RFID) Technology with New Regulations?

PubMed Central

Coustasse, Alberto; Kimble, Craig A.; Stanton, Robert B.; Naylor, Mariah

2016-01-01

Healthcare regulators are directing attention to the pharmaceutical supply chain with the passage of the Drug Quality and Security Act (DQSA) and the Drug Supply Chain Security Act (DSCSA). Adoption of Radio-Frequency Identification (RFID) technology has the ability to improve compliance, reduce costs, and improve safety in the supply chain but its implementation has been limited; primarily because of hardware and tag costs. The purpose of this research study was to analyze the benefits to the pharmaceutical industry and healthcare system of the adoption of RFID technology as a result of newly implemented supply chain regulations. The methodology was a review following the steps of a systematic review with a total of 96 sources used. With the DSCSA, pharmaceutical companies must track and trace prescription drugs across the supply chain, and RFID can resolve many track-and-trace issues with manufacturer control of data. The practical implication of this study is that pharmaceutical companies must continue to have the potential to increase revenues, decrease associated costs, and increase compliance with new FDA regulations with RFID. Still, challenges related to regulatory statute wording, implementation of two-dimensional barcode technology, and the variety of interfaces within the pharmaceutical supply chain have delayed adoption and its full implementation. PMID:27843419

Dynamics of Cathode-Associated Microbial Communities and Metabolite Profiles in a Glycerol-Fed Bioelectrochemical System

PubMed Central

Dennis, Paul G.; Harnisch, Falk; Yeoh, Yun Kit; Tyson, Gene W.

2013-01-01

Electrical current can be used to supply reducing power to microbial metabolism. This phenomenon is typically studied in pure cultures with added redox mediators to transfer charge. Here, we investigate the development of a current-fed mixed microbial community fermenting glycerol at the cathode of a bioelectrochemical system in the absence of added mediators and identify correlations between microbial diversity and the respective product outcomes. Within 1 week of inoculation, a Citrobacter population represented 95 to 99% of the community and the metabolite profiles were dominated by 1,3-propanediol and ethanol. Over time, the Citrobacter population decreased in abundance while that of a Pectinatus population and the formation of propionate increased. After 6 weeks, several Clostridium populations and the production of valerate increased, which suggests that chain elongation was being performed. Current supply was stopped after 9 weeks and was associated with a decrease in glycerol degradation and alcohol formation. This decrease was reversed by resuming current supply; however, when hydrogen gas was bubbled through the reactor during open-circuit operation (open-circuit potential) as an alternative source of reducing power, glycerol degradation and metabolite production were unaffected. Cyclic voltammetry revealed that the community appeared to catalyze the hydrogen evolution reaction, leading to a +400-mV shift in its onset potential. Our results clearly demonstrate that current supply can alter fermentation profiles; however, further work is needed to determine the mechanisms behind this effect. In addition, operational conditions must be refined to gain greater control over community composition and metabolic outcomes. PMID:23603684

Aquarium Trade Supply-Chain Losses of Marine Invertebrates Originating from Papua New Guinea.

PubMed

Militz, Thane A; Kinch, Jeff; Southgate, Paul C

2018-04-01

A major difficulty in managing live organism wildlife trade is often the reliance on trade data to monitor exploitation of wild populations. Harvested organisms that die or are discarded before a point of sale are regularly not reported. For the global marine aquarium trade, identifying supply-chain losses is necessary to more accurately assess exploitation from trade data. We examined quality control rejections and mortality of marine invertebrates (Asteroidea, Gastropoda, Malacostraca, Ophiuroidea) moving through the Papua New Guinea marine aquarium supply-chain, from fisher to importer. Utilizing catch invoices and exporter mortality records we determined that, over a 160 day period, 38.6% of the total invertebrate catch (n = 13,299 individuals) was lost before export. Supply-chain losses were divided among invertebrates rejected in the quality control process (11.5%) and mortality of the accepted catch in transit to, and during holding at, an export facility (30.6%). A further 0.3% died during international transit to importers. We quantified supply-chain losses for the ten most fished species which accounted for 96.4% of the catch. Quality control rejections (n = 1533) were primarily explained by rejections of oversized invertebrates (83.2% of rejections). We suggest that enforceable size limits on species prone to size-based rejections and elimination of village-based holding of invertebrates would reduce losses along the Papua New Guinea supply-chain. This case study underscores that low mortality during international transit may mask large losses along supply-chains prior to export and exemplifies the limitations of trade data to accurately monitor exploitation.

Leading a supply chain turnaround.

PubMed

Slone, Reuben E

2004-10-01

Just five years ago, salespeople at Whirlpool were in the habit of referring to their supply chain organization as the "sales disablers." Now the company excels at getting products to the right place at the right time--while managing to keep inventories low. How did that happen? In this first-person account, Reuben Slone, Whirlpool's vice president of Global Supply Chain, describes how he and his colleagues devised the right supply chain strategy, sold it internally, and implemented it. Slone insisted that the right focal point for the strategy was the satisfaction of consumers at the end of the supply chain. Most supply chain initiatives do the opposite: They start with the realities of a company's manufacturing base and proceed from there. Through a series of interviews with trade customers large and small, his team identified 27 different capabilities that drove industry perceptions of Whirlpool's performance. Knowing it was infeasible to aim for world-class performance across all of them, Slone weighed the costs of excelling at each and found the combination of initiatives that would provide overall competitive advantage. A highly disciplined project management office and broad training in project management were key to keeping work on budget and on benefit. Slone set an intense pace--three "releases" of new capabilities every month--that the group maintains to this day. Lest this seem like a technology story, however, Slone insists it is just as much a "talent renaissance." People are proud today to be part of Whirlpool's supply chain organization, and its new generation of talent will give the company a competitive advantage for years to come.

A meta-heuristic approach supported by NSGA-II for the design and plan of supply chain networks considering new product development

NASA Astrophysics Data System (ADS)

Alizadeh Afrouzy, Zahra; Paydar, Mohammad Mahdi; Nasseri, Seyed Hadi; Mahdavi, Iraj

2018-03-01

There are many reasons for the growing interest in developing new product projects for any firm. The most embossed reason is surviving in a highly competitive industry which the customer tastes are changing rapidly. A well-managed supply chain network can provide the most profit for firms due to considering new product development. Along with profit, customer satisfaction and production of new products are goals which lead to a more efficient supply chain. As new products appear in the market, the old products could become obsolete, and then phased out. The most important parameter in a supply chain which considers new and developed products is the time that developed and new products are introduced and old products are phased out. With consideration of the factors noted above, this study proposes to design a tri-objective multi-echelon multi-product multi-period supply chain model, which incorporates product development and new product production and their effects on supply chain configuration. The supply chain under consideration is assumed to consist of suppliers, manufacturers, distributors and customer groups. In terms of overcoming NP-hardness of the proposed model and in order to solve the complicated problem, a non-dominated sorting genetic algorithm is employed. As there is no benchmark available in the literature, the non-dominated ranking genetic algorithm is developed to validate the results obtained and some test problems are provided to show the applicability of the proposed methodology and evaluate the performance of the algorithms.

Aquarium Trade Supply-Chain Losses of Marine Invertebrates Originating from Papua New Guinea

NASA Astrophysics Data System (ADS)

Militz, Thane A.; Kinch, Jeff; Southgate, Paul C.

2018-04-01

A major difficulty in managing live organism wildlife trade is often the reliance on trade data to monitor exploitation of wild populations. Harvested organisms that die or are discarded before a point of sale are regularly not reported. For the global marine aquarium trade, identifying supply-chain losses is necessary to more accurately assess exploitation from trade data. We examined quality control rejections and mortality of marine invertebrates (Asteroidea, Gastropoda, Malacostraca, Ophiuroidea) moving through the Papua New Guinea marine aquarium supply-chain, from fisher to importer. Utilizing catch invoices and exporter mortality records we determined that, over a 160 day period, 38.6% of the total invertebrate catch ( n = 13,299 individuals) was lost before export. Supply-chain losses were divided among invertebrates rejected in the quality control process (11.5%) and mortality of the accepted catch in transit to, and during holding at, an export facility (30.6%). A further 0.3% died during international transit to importers. We quantified supply-chain losses for the ten most fished species which accounted for 96.4% of the catch. Quality control rejections ( n = 1533) were primarily explained by rejections of oversized invertebrates (83.2% of rejections). We suggest that enforceable size limits on species prone to size-based rejections and elimination of village-based holding of invertebrates would reduce losses along the Papua New Guinea supply-chain. This case study underscores that low mortality during international transit may mask large losses along supply-chains prior to export and exemplifies the limitations of trade data to accurately monitor exploitation.

RFID in the healthcare supply chain: usage and application.

PubMed

Kumar, Sameer; Swanson, Eric; Tran, Thuy

2009-01-01

The purposes of this study are to first, determine the most efficient and cost effective portions of the healthcare supply chain in which radio frequency identification devices (RFID) can be implemented. Second, provide specific examples of RFID implementation and show how these business applications will add to the effectiveness of the healthcare supply chain. And third, to describe the current state of RFID technology and to give practical information for managers in the healthcare sector to make sound decisions about the possible implementation of RFID technology within their organizations. Healthcare industry literature was reviewed and examples of specific instances of RFID implementation were examined using an integrated simulation model developed with Excel, @Risk and Visio software tools. Analysis showed that the cost of implementing current RFID technology is too expensive for broad and sweeping implementation within the healthcare sector at this time. However, several example applications have been identified in which this technology can be effectively leveraged in a cost-effective way. This study shows that RFID technology has come a long way in the recent past and has potential to improve healthcare sector productivity and efficiency. Implementation by large companies such as Wal-mart has helped to make the technology become much more economical in its per unit cost as well as its supporting equipment and training costs. The originality of this study lies in the idea that few practical and pragmatic approaches have been taken within the academic field of study for the implementation of RFID into the healthcare supply chain. Much of the research has focused on specific companies or portions of the supply chain and not the entire supply chain. Also, many of the papers have discussed the future of the supply chain that is heavily dependent on advances in RFID technology. A few viable applications of how RFID technology can be implemented in the healthcare supply chain are presented and how the current state of technology limits the broad use and implementation of this technology in the healthcare industry.

Ethanol production improvement driven by genome-scale metabolic modeling and sensitivity analysis in Scheffersomyces stipitis

PubMed Central

2017-01-01

The yeast Scheffersomyces stipitis naturally produces ethanol from xylose, however reaching high ethanol yields is strongly dependent on aeration conditions. It has been reported that changes in the availability of NAD(H/+) cofactors can improve fermentation in some microorganisms. In this work genome-scale metabolic modeling and phenotypic phase plane analysis were used to characterize metabolic response on a range of uptake rates. Sensitivity analysis was used to assess the effect of ARC on ethanol production indicating that modifying ARC by inhibiting the respiratory chain ethanol production can be improved. It was shown experimentally in batch culture using Rotenone as an inhibitor of the mitochondrial NADH dehydrogenase complex I (CINADH), increasing ethanol yield by 18%. Furthermore, trajectories for uptakes rates, specific productivity and specific growth rate were determined by modeling the batch culture, to calculate ARC associated to the addition of CINADH inhibitor. Results showed that the increment in ethanol production via respiratory inhibition is due to excess in ARC, which generates an increase in ethanol production. Thus ethanol production improvement could be predicted by a change in ARC. PMID:28658270

Ethanol production improvement driven by genome-scale metabolic modeling and sensitivity analysis in Scheffersomyces stipitis.

PubMed

Acevedo, Alejandro; Conejeros, Raúl; Aroca, Germán

2017-01-01

The yeast Scheffersomyces stipitis naturally produces ethanol from xylose, however reaching high ethanol yields is strongly dependent on aeration conditions. It has been reported that changes in the availability of NAD(H/+) cofactors can improve fermentation in some microorganisms. In this work genome-scale metabolic modeling and phenotypic phase plane analysis were used to characterize metabolic response on a range of uptake rates. Sensitivity analysis was used to assess the effect of ARC on ethanol production indicating that modifying ARC by inhibiting the respiratory chain ethanol production can be improved. It was shown experimentally in batch culture using Rotenone as an inhibitor of the mitochondrial NADH dehydrogenase complex I (CINADH), increasing ethanol yield by 18%. Furthermore, trajectories for uptakes rates, specific productivity and specific growth rate were determined by modeling the batch culture, to calculate ARC associated to the addition of CINADH inhibitor. Results showed that the increment in ethanol production via respiratory inhibition is due to excess in ARC, which generates an increase in ethanol production. Thus ethanol production improvement could be predicted by a change in ARC.

Biofuels in the U.S. Transportation Sector (released in AEO2007)

EIA Publications

2007-01-01

Sustained high world oil prices and the passage of the Energy Policy Act 2005 (EPACT) have encouraged the use of agriculture-based ethanol and biodiesel in the transportation sector; however, both the continued growth of the biofuels industry and the long-term market potential for biofuels depend on the resolution of critical issues that influence the supply of and demand for biofuels. For each of the major biofuelscorn-based ethanol, cellulosic ethanol, and biodieselresolution of technical, economic, and regulatory issues remains critical to further development of biofuels in the United States.

Improving healthcare value through clinical community and supply chain collaboration.

PubMed

Ishii, Lisa; Demski, Renee; Ken Lee, K H; Mustafa, Zishan; Frank, Steve; Wolisnky, Jean Paul; Cohen, David; Khanna, Jay; Ammerman, Joshua; Khanuja, Harpal S; Unger, Anthony S; Gould, Lois; Wachter, Patricia Ann; Stearns, Lauren; Werthman, Ronald; Pronovost, Peter

2017-03-01

We hypothesized that integrating supply chain with clinical communities would allow for clinician-led supply cost reduction and improved value in an academic health system. Three clinical communities (spine, joint, blood management) and one clinical community-like physician led team of surgeon stakeholders partnered with the supply chain team on specific supply cost initiatives. The teams reviewed their specific utilization and cost data, and the physicians led consensus-building conversations over a series of team meetings to agree to standard supply utilization. The spine and joint clinical communities each agreed upon a vendor capping model that led to cost savings of $3 million dollars and $1.5 million dollars respectively. The blood management decreased blood product utilization and achieved $1.2 million dollars savings. $5.6 million dollars in savings was achieved by a clinical community-like group of surgeon stakeholders through standardization of sutures and endomechanicals. Physician led clinical teams empowered to lead change achieved substantial supply chain cost savings in an academic health system. The model of combining clinical communities with supply chain offers hope for an effective, practical, and scalable approach to improving value and engaging physicians in other academic health systems. This clinician led model could benefit both private and academic health systems engaging in value optimization efforts. N/A. Copyright © 2016 Elsevier Inc. All rights reserved.

Personal Protective Equipment Supply Chain: Lessons Learned from Recent Public Health Emergency Responses.

PubMed

Patel, Anita; D'Alessandro, Maryann M; Ireland, Karen J; Burel, W Greg; Wencil, Elaine B; Rasmussen, Sonja A

Personal protective equipment (PPE) that protects healthcare workers from infection is a critical component of infection control strategies in healthcare settings. During a public health emergency response, protecting healthcare workers from infectious disease is essential, given that they provide clinical care to those who fall ill, have a high risk of exposure, and need to be assured of occupational safety. Like most goods in the United States, the PPE market supply is based on demand. The US PPE supply chain has minimal ability to rapidly surge production, resulting in challenges to meeting large unexpected increases in demand that might occur during a public health emergency. Additionally, a significant proportion of the supply chain is produced off-shore and might not be available to the US market during an emergency because of export restrictions or nationalization of manufacturing facilities. Efforts to increase supplies during previous public health emergencies have been challenging. During the 2009 H1N1 influenza pandemic and the 2014 Ebola virus epidemic, the commercial supply chain of pharmaceutical and healthcare products quickly became critical response components. This article reviews lessons learned from these responses from a PPE supply chain and systems perspective and examines ways to improve PPE readiness for future responses.

Pharmaceutical supply chain risks: a systematic review

PubMed Central

2013-01-01

Introduction Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. Objective In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Methods Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Results Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. Conclusion It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies. PMID:24355166

Integration of succinic acid and ethanol production within a corn or barley biorefinery

USDA-ARS?s Scientific Manuscript database

Production of succinic acid from glucose by Escherichia coli strain AFP184 was studied in a batch fermentor. The bases used for pH control included NaOH, KOH, NH4OH, and Na2CO3. The yield of succinic acid without and with carbon dioxide supplied by an adjacent ethanol fermentor using either corn or ...

Optimization of dilute sulfuric acid pretreatment and enzymatic saccharification of corn stover for efficient ethanol production

USDA-ARS?s Scientific Manuscript database

Dilute acid pretreatment is a promising pretreatment technology for conversion of lignocellulosic biomass to fuel ethanol. Corn stover (supplied by a local farmer) used in this study contained 37.0±0.4% cellulose, 31.3±0.6% hemicelluloses, and 17.8±0.2% lignin. Generation of fermentable sugars from ...

Impact of radio-frequency identification (RFID) technologies on the hospital supply chain: a literature review.

PubMed

Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea

2013-01-01

Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives.

Impact of Radio-Frequency Identification (RFID) Technologies on the Hospital Supply Chain: A Literature Review

PubMed Central

Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea

2013-01-01

Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives. PMID:24159272

Ethanol and Other Short-Chain Alcohols Inhibit NLRP3 Inflammasome Activation through Protein Tyrosine Phosphatase Stimulation

PubMed Central

Hoyt, Laura R.; Ather, Jennifer L.; Randall, Matthew J.; DePuccio, Daniel P.; Landry, Christopher C.; Wewers, Mark D.; Gavrilin, Mikhail A.; Poynter, Matthew E.

2016-01-01

Immunosuppression is a major complication of alcoholism that contributes to increased rates of opportunistic infections and sepsis in alcoholics. The NLRP3 inflammasome, a multi-protein intracellular pattern recognition receptor complex that facilitates the cleavage and secretion of the pro-inflammatory cytokines IL-1β and IL-18, can be inhibited by ethanol and we sought to better understand the mechanism through which this occurs and whether chemically similar molecules exert comparable effects. We show that ethanol can specifically inhibit activation of the NLRP3 inflammasome, resulting in attenuated IL-1β and caspase-1 cleavage and secretion, as well as diminished ASC speck formation, without affecting potassium efflux, in a mouse macrophage cell line (J774), mouse bone marrow derived dendritic cells, mouse neutrophils, and human PBMCs. The inhibitory effects on the Nlrp3 inflammasome were independent of GABAA receptor activation or NMDA receptor inhibition, but was associated with decreased oxidant production. Ethanol treatment markedly decreased cellular tyrosine phosphorylation, while administration of the tyrosine phosphatase inhibitor sodium orthovanadate prior to ethanol restored tyrosine phosphorylation and IL-1β secretion subsequent to ATP stimulation. Furthermore, sodium orthovanadate-induced phosphorylation of ASC Y144, necessary and sufficient for Nlrp3 inflammasome activation, and secretion of phosphorylated ASC, were inhibited by ethanol. Finally, multiple alcohol-containing organic compounds exerted inhibitory effects on the Nlrp3 inflammasome, whereas 2-methylbutane (isopentane), the analogous alkane of the potent inhibitor isoamyl alcohol (isopentanol), did not. Our results demonstrate that ethanol antagonizes the NLRP3 inflammasome at an apical event in its activation through the stimulation of protein tyrosine phosphatases, an effect shared by other short-chain alcohols. PMID:27421477

Ethanol and Other Short-Chain Alcohols Inhibit NLRP3 Inflammasome Activation through Protein Tyrosine Phosphatase Stimulation.

PubMed

Hoyt, Laura R; Ather, Jennifer L; Randall, Matthew J; DePuccio, Daniel P; Landry, Christopher C; Wewers, Mark D; Gavrilin, Mikhail A; Poynter, Matthew E

2016-08-15

Immunosuppression is a major complication of alcoholism that contributes to increased rates of opportunistic infections and sepsis in alcoholics. The NLRP3 inflammasome, a multiprotein intracellular pattern recognition receptor complex that facilitates the cleavage and secretion of the proinflammatory cytokines IL-1β and IL-18, can be inhibited by ethanol, and we sought to better understand the mechanism through which this occurs and whether chemically similar molecules exert comparable effects. We show that ethanol can specifically inhibit activation of the NLRP3 inflammasome, resulting in attenuated IL-1β and caspase-1 cleavage and secretion, as well as diminished apoptosis-associated speck-like protein containing a CARD (ASC) speck formation, without affecting potassium efflux, in a mouse macrophage cell line (J774), mouse bone marrow-derived dendritic cells, mouse neutrophils, and human PBMCs. The inhibitory effects on the Nlrp3 inflammasome were independent of γ-aminobutyric acid A receptor activation or N-methyl-d-asparate receptor inhibition but were associated with decreased oxidant production. Ethanol treatment markedly decreased cellular tyrosine phosphorylation, whereas administration of the tyrosine phosphatase inhibitor sodium orthovanadate prior to ethanol restored tyrosine phosphorylation and IL-1β secretion subsequent to ATP stimulation. Furthermore, sodium orthovanadate-induced phosphorylation of ASC Y144, necessary and sufficient for Nlrp3 inflammasome activation, and secretion of phosphorylated ASC were inhibited by ethanol. Finally, multiple alcohol-containing organic compounds exerted inhibitory effects on the Nlrp3 inflammasome, whereas 2-methylbutane (isopentane), the analogous alkane of the potent inhibitor isoamyl alcohol (isopentanol), did not. Our results demonstrate that ethanol antagonizes the NLRP3 inflammasome at an apical event in its activation through the stimulation of protein tyrosine phosphatases, an effect shared by other short-chain alcohols. Copyright © 2016 by The American Association of Immunologists, Inc.

Advancing Cost-Effective Readiness by Improving the Supply Chain Management of Sparse, Intermittently-Demanded Parts

DTIC Science & Technology

2015-03-26

DEMANDED PARTS DISSERTATION Gregory H. Gehret AFIT-ENS-DS-15-M- 256 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE...protection in the United States. AFIT-ENS-DS-15-M- 256 ADVANCING COST-EFFECTIVE READINESS BY IMPROVING THE SUPPLY CHAIN MANAGEMENT OF SPARSE...RELEASE; DISTRIBUTION UNLIMITED. AFIT-ENS-DS-15-M- 256 ADVANCING COST-EFFECTIVE READINESS BY IMPROVING THE SUPPLY CHAIN MANAGEMENT OF SPARSE

Strategy to Enhance International Supply Chain Security

DTIC Science & Technology

2007-07-01

airports as part of the effort to secure air passenger travel . The security assessment crew traveling by air, land or sea cannot be considered only a... travel security issue. The assessment of a container ship’s crew or of a driver moving a truck into the secure area of a port are also supply chain...threats through its traveler screening and worker credentialing programs. The strategy to secure the supply chain reflects the larger security

Understanding Organizational Agility: A Work-Design Perspective

DTIC Science & Technology

2008-06-01

NG SDG Proactive Yes Yes Yes Yes Yes Yes N/S N/S N/S Reactive Simultaneity of work design at three levels Yes Supply Chain Network Agility High Table...firm can take effective action to benefit itself and its customers. In analyzing representative supply - chain definitions of agility, the main theme...and Heppard 2000). Third, as effective supply chain management has come to be regarded as major source of competitive advantage for many firms

RFID Application Strategy in Agri-Food Supply Chain Based on Safety and Benefit Analysis

NASA Astrophysics Data System (ADS)

Zhang, Min; Li, Peichong

Agri-food supply chain management (SCM), a management method to optimize internal costs and productivities, has evolved as an application of e-business technologies. These days, RFID has been widely used in many fields. In this paper, we analyze the characteristics of agri-food supply chain. Then the disadvantages of RFID are discussed. After that, we study the application strategies of RFID based on benefit and safety degree.

Developing a Supply Chain Management Certification for the Department of Defense

DTIC Science & Technology

2007-12-01

Supply Chain Management, the 77 M. Eric Johnson and David Pyke, “A Framework for Teaching Supply Chain Management,” Production and Operations...Review Web Site (October 5, 2006), http://www.scmr.com/article/CA6378393.html?text=rankings (accessed May 10, 2007). 86 M. Eric Johnson and David...2006). 103 M. Eric Johnson and David Pyke. (2000). 34 When an individual completes the entire proposed curriculum, an acquisition professional

Channel characteristics and coordination in three-echelon dual-channel supply chain

NASA Astrophysics Data System (ADS)

Saha, Subrata

2016-02-01

We explore the impact of channel structure on the manufacturer, the distributer, the retailer and the entire supply chain by considering three different channel structures in radiance of with and without coordination. These structures include a traditional retail channel and two manufacturer direct channels with and without consistent pricing. By comparing the performance of the manufacturer, the distributer and the retailer, and the entire supply chain in three different supply chain structures, it is established analytically that, under some conditions, a dual channel can outperform a single retail channel; as a consequence, a coordination mechanism is developed that not only coordinates the dual channel but also outperforms the non-cooperative single retail channel. All the analytical results are further analysed through numerical examples.

Research on the performance evaluation of agricultural products supply chain integrated operation

NASA Astrophysics Data System (ADS)

Jiang, Jiake; Wang, Xifu; Liu, Yang

2017-04-01

The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

Reorganizing Nigeria's Vaccine Supply Chain Reduces Need For Additional Storage Facilities, But More Storage Is Required.

PubMed

Shittu, Ekundayo; Harnly, Melissa; Whitaker, Shanta; Miller, Roger

2016-02-01

One of the major problems facing Nigeria's vaccine supply chain is the lack of adequate vaccine storage facilities. Despite the introduction of solar-powered refrigerators and the use of new tools to monitor supply levels, this problem persists. Using data on vaccine supply for 2011-14 from Nigeria's National Primary Health Care Development Agency, we created a simulation model to explore the effects of variance in supply and demand on storage capacity requirements. We focused on the segment of the supply chain that moves vaccines inside Nigeria. Our findings suggest that 55 percent more vaccine storage capacity is needed than is currently available. We found that reorganizing the supply chain as proposed by the National Primary Health Care Development Agency could reduce that need to 30 percent more storage. Storage requirements varied by region of the country and vaccine type. The Nigerian government may want to consider the differences in storage requirements by region and vaccine type in its proposed reorganization efforts. Project HOPE—The People-to-People Health Foundation, Inc.

Duodenal supply of glutamate and casein both improve intestinal starch digestion in cattle but by apparently different mechanisms.

PubMed

Brake, D W; Titgemeyer, E C; Anderson, D E

2014-09-01

Greater postruminal flows of protein increase small intestinal starch digestion in cattle. Our objective was to determine if small intestinal starch digestion is increased by duodenal supplementation of AA. We fed 5 duodenally and ileally cannulated steers a low-starch soybean hull-based diet in 5 × 5 Latin square designs and provided continuous duodenal infusion of raw cornstarch in combination with AA or casein and measured small intestinal starch digestion. In Exp. 1 treatments were continuous duodenal infusion of 1) no supplement (control), 2) casein (400 g/d), 3) crystalline AA similar in amount and AA composition to the casein (CASAA), 4) crystalline nonessential AA similar to those provided by casein, or 5) crystalline essential AA similar to those provided by casein. In Exp. 2 treatments were continuous duodenal infusion of 1) no supplement (control), 2) casein (400 g/d), 3) Glu (133 g/d), 4) Phe and Trp plus Met (30.4, 6.5, and 17.5 g/d, respectively; PTM), or 5) a combination of Glu and PTM. Duodenal infusion of casein increased (P ≤ 0.05) small intestinal starch digestion. When CASAA was infused, small intestinal starch digestion was similar (P = 0.30) to casein infusion. Infusion of only nonessential AA tended to increase (P = 0.14) small intestinal starch digestion relative to the control, but infusion of essential AA alone did not affect (P = 0.84) small intestinal starch digestion. In addition, infusion of casein or CASAA increased ileal flows of ethanol-soluble starch (small-chain α-glycosides), but nonessential AA alone were not different than the control. Duodenal infusion of Glu increased (P ≤ 0.05) small intestinal starch digestion, whereas PTM did not. Neither Glu nor PTM increased ileal flow of ethanol-soluble starch, but Glu and PTM provided together tended (P = 0.07) to increase ileal flows of small chain α-glycosides. Our data suggest that Glu alone can increase small intestinal starch digestion in cattle similar to casein, but increases in small intestinal starch digestion in response to Glu are not associated with an increase in ileal flows of small chain α-glycosides.

Conflict minerals from the Democratic Republic of the Congo: global tungsten processing plants, a critical part of the tungsten supply chain

USGS Publications Warehouse

Bermúdez-Lugo, Omayra

2014-01-01

The U.S. Geological Survey (USGS) analyzes supply chains to identify and define major components of mineral and material flows from ore extraction, through intermediate forms, to a final product. Two major reasons necessitate these analyses: (1) to identify risks associated with the supply of critical and strategic minerals to the United States and (2) to provide greater supply chain transparency so that policymakers have the information necessary to ensure domestic legislation compliance. This fact sheet focuses on the latter. The USGS National Minerals Information Center has been asked by governmental and non-governmental organizations to provide information on tin, tantalum, tungsten, and gold (collectively known as “3TG minerals”) processing facilities worldwide in response to U.S. legislation aimed at removing the link between the trade in these minerals and civil unrest in the Democratic Republic of the Congo. Post beneficiation processing plants (smelters and refineries) of 3TG mineral ores and concentrates were identified by company and industry association representatives as being the link in the 3TG mineral supply chain through which these minerals can be traced to their source of origin (mine); determining the point of origin is critical to establishing a transparent conflict mineral supply chain. This fact sheet, the first in a series of 3TG mineral fact sheets, focuses on the tungsten supply chain by listing plants that consume tungsten concentrates to produce ammonium paratungstate and ferrotungsten worldwide.

Development of coordination system model on single-supplier multi-buyer for multi-item supply chain with probabilistic demand

NASA Astrophysics Data System (ADS)

Olivia, G.; Santoso, A.; Prayogo, D. N.

2017-11-01

Nowadays, the level of competition between supply chains is getting tighter and a good coordination system between supply chains members is very crucial in solving the issue. This paper focused on a model development of coordination system between single supplier and buyers in a supply chain as a solution. Proposed optimization model was designed to determine the optimal number of deliveries from a supplier to buyers in order to minimize the total cost over a planning horizon. Components of the total supply chain cost consist of transportation costs, handling costs of supplier and buyers and also stock out costs. In the proposed optimization model, the supplier can supply various types of items to retailers whose item demand patterns are probabilistic. Sensitivity analysis of the proposed model was conducted to test the effect of changes in transport costs, handling costs and production capacities of the supplier. The results of the sensitivity analysis showed a significant influence on the changes in the transportation cost, handling costs and production capacity to the decisions of the optimal numbers of product delivery for each item to the buyers.

Ethanol immunosuppression in vitro

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaplan, D.R.

Ethanol in concentrations equivalent to levels achieved by the ingestion of moderate to large amounts of alcoholic beverages has been shown to inhibit mitogen and anti-CD3 stimulated human T lymphocyte proliferation. This inhibition was monophasic suggesting that ethanol affected a single limiting component of T cell proliferation. In experiments designed to test the effect of ethanol on various aspects of proliferation, it was demonstrated that ethanol inhibited the capacity of exogenously supplied interleukin 2 to stimulate proliferation of T cells that had previously acquired interleukin 2 receptors in a monophasic, dose-dependent manner. Moreover, there was no suppression of interleukin 2more » production or interleukin 2 receptor acquisition. Thus, ethanol was shown to mediate immunosuppression by a mechanism specific to one component of proliferation. Additive inhibition of T cell proliferation was seen with ethanol plus cyclosporin A which inhibits interleukin 2 production. The level of inhibition with 250 ng/ml cyclosporin A alone was equivalent to the level seen with 62 ng/ml cyclosporin A plus 20 mM (94 mg%) ethanol. Ethanol also suppressed an immune effector mechanism. NK cytotoxicity was depressed in a monophasic, dose-dependent manner. Thus, ethanol might be considered as a possible adjunct in immunosuppressive therapy.« less

And Who Will Teach Them? An Investigation of the Logistics PhD Market

ERIC Educational Resources Information Center

Golicic, Susan L.; Bobbitt, L. Michelle; Frankel, Robert; Clinton, Steven R.

2004-01-01

At a time when there is high demand for logistics/supply chain education at the undergraduate and master's levels, there is short supply of logistics PhDs to take faculty positions. In this research, the authors used both primary and secondary research to confirm the gap between supply and demand of logistics/supply-chain scholars. Their study…

Supply chain optimization for pediatric perioperative departments.

PubMed

Davis, Janice L; Doyle, Robert

2011-09-01

Economic challenges compel pediatric perioperative departments to reduce nonlabor supply costs while maintaining the quality of patient care. Optimization of the supply chain introduces a framework for decision making that drives fiscally responsible decisions. The cost-effective supply chain is driven by implementing a value analysis process for product selection, being mindful of product sourcing decisions to reduce supply expense, creating logistical efficiency that will eliminate redundant processes, and managing inventory to ensure product availability. The value analysis approach is an analytical methodology for product selection that involves product evaluation and recommendation based on consideration of clinical benefit, overall financial impact, and revenue implications. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Review of the 2015 Drug Supply Chain Security Act

PubMed Central

Brechtelsbauer, Erich D.; Pennell, Benjamin; Durham, Mary; Hertig, John B.; Weber, Robert J.

2016-01-01

The integrity of the pharmaceutical supply chain is threatened by medication counterfeiting, importation of unapproved and substandard drugs, and grey markets – all of which have the potential to distribute drug products with the potential for serious harm. On November 27, 2013, President Obama signed into law Title II of the Drug Quality and Security Act, now known as the Drug Supply Chain Security Act (DSCSA). Over the next 10 years, the DSCSA will require the pharmaceutical supply chain to implement medication tracking and tracing; serialization, verification, and detection of suspicious products; and strict guidelines for wholesaler licensing and reporting. This article reviews the important aspects of the DSCSA and outlines the role of health-system pharmacy leaders in ensuring compliance to the DSCSA. By verifying that medication supplies are free from adulteration and tampering, the DSCSA serves as a foundational law to ensure quality in providing patient-centered pharmacy services. PMID:27354753

Alignment between chain quality management and chain governance in EU pork supply chains: a Transaction-Cost-Economics perspective.

PubMed

Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno

2010-02-01

Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.

Food-grade submicrometer particles from salts prepared using ethanol-in-oil mixtures.

PubMed

Paques, Jerome P; van der Linden, Erik; Sagis, Leonard M C; van Rijn, Cees J M

2012-08-29

A simple method for preparing food-grade particles in the submicrometer range of ethanol soluble salts using ethanol-in-oil (E/O) mixtures is described. Salts CaCl2·2H2O and MgCl2·6H2O were dissolved in ethanol that subsequently was mixed with a medium-chain triglyceride oil phase. It was found that type and concentration of salt have a significant influence on the miscibility of ethanol and oil phase and on the stability of E/O mixtures. The ethanol phase was evaporated from the mixture at elevated temperatures, and salt particles with dimensions in the submicrometer range (6-400 nm) remained suspended in the oil phase. It was found that the concentration of salt and volume fraction of ethanol in MCT oil have a significant influence on the size distribution of salt particles. The size of CaCl2 and MgCl2 submicrometer particles was ascertained by scanning electron microscopy and dynamic light scattering.

77 FR 8839 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... supply chain management (SCM) practices, processes and metrics that could be beneficial to the Department... commercial supply chain management. Dated: January 31, 2012. Patricia L. Toppings, OSD Federal Register..., OH, 45433, or call 937-255-3636 x4674. Title; Associated Form; and OMB Number: Leading Edge Supply...

When falsified medicines enter the supply chain: description of an incident in Kenya and lessons learned for rapid response.

PubMed

Cohn, Jennifer; von Schoen-Angerer, Tido; Jambert, Elodie; Arreghini, Guido; Childs, Michelle

2013-01-01

Falsified and substandard medicines present serious concerns for public health. We describe an event that occurred in late 2011 involving falsified antiretroviral medicines found in the supplies of Médecins Sans Frontières (MSF) projects in Kenya. We discuss factors contributing to these falsified medicines entering the supply chain as well as the response by MSF and others. We make recommendations to help defend against future episodes of entry of falsified medicines into the supply chain as well as comments on appropriate responses in cases of falsified medicines.

A new strategy of glucose supply in a microbial fermentation model

NASA Astrophysics Data System (ADS)

Kasbawati, Gunawan, A. Y.; Sidarto, K. A.; Hertadi, R.

2015-09-01

Strategy of glucose supply to achieve an optimal productivity of ethanol production of a yeast cell is one of the main features in a microbial fermentation process. Beside a known continuous glucose supply, in this study we consider a new supply strategy so called the on-off supply. An optimal control theory is applied to the fermentation system to find the optimal rate of glucose supply and time of supply. The optimization problem is solved numerically using Differential Evolutionary algorithm. We find two alternative solutions that we can choose to get the similar result: either long period process with low supply or short period process with high glucose supply.

Forecasting jobs in the supply chain for investments in residential energy efficiency retrofits in Florida

NASA Astrophysics Data System (ADS)

Fobair, Richard C., II

This research presents a model for forecasting the numbers of jobs created in the energy efficiency retrofit (EER) supply chain resulting from an investment in upgrading residential buildings in Florida. This investigation examined material supply chains stretching from mining to project installation for three product types: insulation, windows/doors, and heating, ventilating, and air conditioning (HVAC) systems. Outputs from the model are provided for the project, sales, manufacturing, and mining level. The model utilizes reverse-estimation to forecast the numbers of jobs that result from an investment. Reverse-estimation is a process that deconstructs a total investment into its constituent parts. In this research, an investment is deconstructed into profit, overhead, and hard costs for each level of the supply chain and over multiple iterations of inter-industry exchanges. The model processes an investment amount, the type of work and method of contracting into a prediction of the number of jobs created. The deconstruction process utilizes data from the U.S. Economic Census. At each supply chain level, the cost of labor is reconfigured into full-time equivalent (FTE) jobs (i.e. equivalent to 40 hours per week for 52 weeks) utilizing loaded labor rates and a typical employee mix. The model is sensitive to adjustable variables, such as percentage of work performed per type of product, allocation of worker time per skill level, annual hours for FTE calculations, wage rate, and benefits. This research provides several new insights into job creation. First, it provides definitions that can be used for future research on jobs in supply chains related to energy efficiency. Second, it provides a methodology for future investigators to calculate jobs in a supply chain resulting from an investment in energy efficiency upgrades to a building. The methodology used in this research is unique because it examines gross employment at the sub-industry level for specific commodities. Most research on employment examines the net employment change (job creation less job destruction) at levels for regions, industries, and the aggregate economy. Third, it provides a forecast of the numbers of jobs for an investment in energy efficiency over the entire supply chain for the selected industries and the job factors for major levels of the supply chain.

Identifying bottlenecks in the iron and folic acid supply chain in Bihar, India: a mixed-methods study.

PubMed

Wendt, Amanda S; Stephenson, Rob; Young, Melissa F; Verma, Pankaj; Srikantiah, Sridhar; Webb-Girard, Amy; Hogue, Carol J; Ramakrishnan, Usha; Martorell, Reynaldo

2018-04-12

Maternal anaemia prevalence in Bihar, India remains high despite government mandated iron supplementation targeting pregnant women. Inadequate supply has been identified as a potential barrier to iron and folic acid (IFA) receipt. Our study objective was to examine the government health system's IFA supply and distribution system and identify bottlenecks contributing to insufficient IFA supply. Primary data collection was conducted in November 2011 and July 2012 across 8 districts in Bihar, India. A cross-sectional, observational, mixed methods approach was utilized. Auxiliary Nurse Midwives were surveyed on current IFA supply and practices. In-depth interviews (n = 59) were conducted with health workers at state, district, block, health sub-centre, and village levels. Overall, 44% of Auxiliary Nurse Midwives were out of IFA stock. Stock levels and supply chain practices varied greatly across districts. Qualitative data revealed specific bottlenecks impacting IFA forecasting, procurement, storage, disposal, lack of personnel, and few training opportunities for key players in the supply chain. Inadequate IFA supply is a major constraint to the IFA supplementation program, the extent of which varies widely across districts. Improvements at all levels of infrastructure, practices, and effective monitoring will be critical to strengthen the IFA supply chain in Bihar.

Augmenting Transport versus Increasing Cold Storage to Improve Vaccine Supply Chains

PubMed Central

Haidari, Leila A.; Connor, Diana L.; Wateska, Angela R.; Brown, Shawn T.; Mueller, Leslie E.; Norman, Bryan A.; Schmitz, Michelle M.; Paul, Proma; Rajgopal, Jayant; Welling, Joel S.; Leonard, Jim; Chen, Sheng-I; Lee, Bruce Y.

2013-01-01

Background When addressing the urgent task of improving vaccine supply chains, especially to accommodate the introduction of new vaccines, there is often a heavy emphasis on stationary storage. Currently, donations to vaccine supply chains occur largely in the form of storage equipment. Methods This study utilized a HERMES-generated detailed, dynamic, discrete event simulation model of the Niger vaccine supply chain to compare the impacts on vaccine availability of adding stationary cold storage versus transport capacity at different levels and to determine whether adding stationary storage capacity alone would be enough to relieve potential bottlenecks when pneumococcal and rotavirus vaccines are introduced by 2015. Results Relieving regional level storage bottlenecks increased vaccine availability (by 4%) more than relieving storage bottlenecks at the district (1% increase), central (no change), and clinic (no change) levels alone. Increasing transport frequency (or capacity) yielded far greater gains (e.g., 15% increase in vaccine availability when doubling transport frequency to the district level and 18% when tripling). In fact, relieving all stationary storage constraints could only increase vaccine availability by 11%, whereas doubling the transport frequency throughout the system led to a 26% increase and tripling the frequency led to a 30% increase. Increasing transport frequency also reduced the amount of stationary storage space needed in the supply chain. The supply chain required an additional 61,269L of storage to relieve constraints with the current transport frequency, 55,255L with transport frequency doubled, and 51,791L with transport frequency tripled. Conclusions When evaluating vaccine supply chains, it is important to understand the interplay between stationary storage and transport. The HERMES-generated dynamic simulation model showed how augmenting transport can result in greater gains than only augmenting stationary storage and can reduce stationary storage needs. PMID:23717590

Augmenting transport versus increasing cold storage to improve vaccine supply chains.

PubMed

Haidari, Leila A; Connor, Diana L; Wateska, Angela R; Brown, Shawn T; Mueller, Leslie E; Norman, Bryan A; Schmitz, Michelle M; Paul, Proma; Rajgopal, Jayant; Welling, Joel S; Leonard, Jim; Chen, Sheng-I; Lee, Bruce Y

2013-01-01

When addressing the urgent task of improving vaccine supply chains, especially to accommodate the introduction of new vaccines, there is often a heavy emphasis on stationary storage. Currently, donations to vaccine supply chains occur largely in the form of storage equipment. This study utilized a HERMES-generated detailed, dynamic, discrete event simulation model of the Niger vaccine supply chain to compare the impacts on vaccine availability of adding stationary cold storage versus transport capacity at different levels and to determine whether adding stationary storage capacity alone would be enough to relieve potential bottlenecks when pneumococcal and rotavirus vaccines are introduced by 2015. Relieving regional level storage bottlenecks increased vaccine availability (by 4%) more than relieving storage bottlenecks at the district (1% increase), central (no change), and clinic (no change) levels alone. Increasing transport frequency (or capacity) yielded far greater gains (e.g., 15% increase in vaccine availability when doubling transport frequency to the district level and 18% when tripling). In fact, relieving all stationary storage constraints could only increase vaccine availability by 11%, whereas doubling the transport frequency throughout the system led to a 26% increase and tripling the frequency led to a 30% increase. Increasing transport frequency also reduced the amount of stationary storage space needed in the supply chain. The supply chain required an additional 61,269L of storage to relieve constraints with the current transport frequency, 55,255L with transport frequency doubled, and 51,791L with transport frequency tripled. When evaluating vaccine supply chains, it is important to understand the interplay between stationary storage and transport. The HERMES-generated dynamic simulation model showed how augmenting transport can result in greater gains than only augmenting stationary storage and can reduce stationary storage needs.

The people factor: An analysis of the human resources landscape for immunization supply chain management.

PubMed

Kasonde, Musonda; Steele, Pamela

2017-04-19

Human resources is the backbone of any system and the key enabler for all other functions to effectively perform. This is no different with the Immunization Supply Chain, more so in todays' complex operating environment with the increasing strain caused by new vaccines and expanding immunization programmes (Source: WHO, UNICEF). In order to drive the change that is required for sustainability and continuous improvement, every immunization supply chain needs an effective leader. A dedicated and competent immunization supply chain leader with adequate numbers of skilled, accountable, motivated and empowered personnel at all levels of the health system to overcome existing and emerging immunization supply chain (ISC) challenges. Without an effective supply chain leader supported by capable and motivated staff, none of the interventions designed to strengthen the supply chain can be effective or sustainable (Source: Gavi Alliance SC Strategy 2014). This landscape analysis was preceded by an HR Evidence Review (March 2014) and has served to inform global partner strategies and country activities, as well as highlight where most support is required. The study also aimed to define the status quo in order to create some form of baseline against which to measure the impact of interventions related to HR going forward. The analysis was comprised of a comprehensive desk review, a survey of 40 respondents from 32 countries and consultations with ISC practitioners in several forums. The findings highlight key areas that should inform the pillars of a HR capacity development plan. At the same time, it revealed that there are some positive examples of where countries are actively addressing some of the issues identified and putting in place mechanisms and structures to optimize the SC function. Copyright © 2017. Published by Elsevier Ltd.

Phylogenetic grouping and distribution of virulence genes in Escherichia coli along the production and supply chain of pork around Hubei, China.

PubMed

Khan, Sher Bahadar; Zou, Geng; Cheng, Yu-Ting; Xiao, Ran; Li, Lu; Wu, Bin; Zhou, Rui

2017-06-01

Escherichia coli is an important foodborne zoonotic pathogen. A total of 285 strains of E. coli were isolated from the production and supply chain of pork in Hubei, China and characterized. Their phylogroups (A, B1, B2, and D) and virulence genes of public health importance become more and more diverse along the production and supply chain. Copyright © 2016. Published by Elsevier B.V.

Measuring and Managing Army Supply Chain Risk: A Quantitative Approach by Item Number and Commercial Entity Code

DTIC Science & Technology

2015-01-01

services to the end user across the modes of transport .” As such, the supply chain “may include vendors, manufacturing facilities, logistics providers...sharing them with a group, before ranking each. For more information, see Van De Ven and Delbecq, 1974. 12 “When working through the vulnerability...are cost-effective (Kiser and Cantrell, 2006), avoiding higher production and transportation costs. Figure 2.5 outlines two prevalent supply chain

F-35 Lightning II Program Quality Assurance and Corrective Action Evaluation

DTIC Science & Technology

2015-03-11

5000.02, “Operation of the Defense Acquisition System,” enclosure 1; and DoD Manual 4140.01, “DoD Supply Chain Materiel Management Procedures...initiated several initiatives to reduce nonconformances of all types both within their facilities and throughout their supply chains . The F-35 JPO is...agreed and stated: There are effective Corrective Action processes already in place within Lockheed Martin and the supply chain . DCMA and F-35 JPO

Influence of green supply chain risk management on performance of Chinese manufacturing enterprises

NASA Astrophysics Data System (ADS)

Zhang, Dongying; Yuting, Duan; Junyi, Shen

2017-12-01

This paper briefly introduces the background of the research on the impact of green supply chain risk management on corporate performance, reviews the relevant research literature at home and abroad, and uses the gray relational analysis to analyze the impact of the green supply chain risk management on enterprise performance based on 26 industry-related statistical data, from purchasing risk management performance,manufacturing risk management performance and marketing risk management performance.

Developing a suitable model for supplier selection based on supply chain risks: an empirical study from Iranian pharmaceutical companies.

PubMed

Mehralian, Gholamhossein; Rajabzadeh Gatari, Ali; Morakabati, Mohadese; Vatanpour, Hossein

2012-01-01

The supply chain represents the critical link between the development of new product and the market in pharmaceutical industry. Over the years, improvements made in supply chain operations have focused largely on ways to reduce cost and gain efficiencies in scale. In addition, powerful regulatory and market forces have provided new incentives for pharmaceutical firms to basically rethink the way they produce and distribute products, and also to re-imagine the role of the supply chain in driving strategic growth, brand differentiation and economic value in the health continuum. The purpose of this paper is to formulate basic factors involved in risk analysis of pharmaceutical industry, and also determine the effective factors involved in suppliers selection and their priorities. This paper is based on the results of literature review, experts' opinion acquisition, statistical analysis and also using MADM models on data gathered from distributed questionnaires. The model consists of the following steps and components: first factors involved in to supply chain risks are determined. Based on them a framework is considered. According the result of statistical analysis and MADM models the risk factors are formulated. The paper determines the main components and influenceial factors involving in the supply chain risks. Results showed that delivery risk can make an important contribution to mitigate the risk of pharmaceutical industry.

[Drug supply chain safety in hospitals: current data and experience of the Grenoble university hospital].

PubMed

Bedouch, P; Baudrant, M; Detavernier, M; Rey, C; Brudieu, E; Foroni, L; Allenet, B; Calop, J

2009-01-01

Drug supply chain safety has become a priority for public health which implies a collective process. This process associates all health professionals including the pharmacist who plays a major role. The objective of this present paper is to describe the several approaches proven effective in the reduction of drug-related problem in hospital, illustrated by the Grenoble University Hospital experience. The pharmacist gets involved first in the general strategy of hospital drug supply chain, second by his direct implication in clinical activities. The general strategy of drug supply chain combines risk management, coordination of the Pharmacy and Therapeutics Committee, selection and purchase of drugs and organisation of drug supply chain. Computer management of drug supply chain is a major evolution. Nominative drug delivering has to be a prior objective and its implementation modalities have to be defined: centralized or decentralized in wards, manual or automated. Also, new technologies allow the automation of overall drug distribution from central pharmacy and the implementation of automated drug dispensing systems into wards. The development of centralised drug preparation allows a safe compounding of high risk drugs, like cytotoxic drugs. The pharmacist should develop his clinical activities with patients and other health care professionals in order to optimise clinical decisions (medication review, drug order analysis) and patients follow-up (therapeutic monitoring, patient education, discharge consultation).

Building green supply chains in eco-industrial parks towards a green economy: Barriers and strategies.

PubMed

Li, Jacqueline; Pan, Shu-Yuan; Kim, Hyunook; Linn, Jean H; Chiang, Pen-Chi

2015-10-01

As suggested by UNEP, the key to sustainable development is to create a "green economy" which should encapsulate all three sectors: the industry, the people, and the government. Therefore, there is an urgent need to develop and implement the green technologies into the existing facilities, especially in the developing countries. In this study, the role of green supply chains in eco-industrial parks (EIPs) towards a green economy was investigated. The strategies and effective evaluation procedures of the green economy were proposed by assessing the barriers from the perspective of institution, regulation, technology, and finance. In addition, three case studies from iron and steel-making, paper mill and pulping, and petrochemical industries were presented and illustrated for building the green supply chains. For example, in the case of Lin-Hai Industrial Park, a total of 15 efficient green supply chains using waste-to-resources technologies were established by 2012, resulting in an economic benefit of USD 100 million per year. It suggests that the green supply chains should be established to achieve both economic growth and environmental protection. With these successful experiences, building a green supply chain within industrial park should be extensively promoted to make traditional industries around the world being environmentally bearable, economic viable, and social equitable. Copyright © 2015 Elsevier Ltd. All rights reserved.

Lean production in improving supply chain performance through hybrid model SCOR 11.0 - system dynamics

NASA Astrophysics Data System (ADS)

Saleh, Chairul; Fatcha Mubiena, Ghaida; Immawan, Taufiq; Hassan, Azmi

2016-02-01

Supply Chain Operation Reference (SCOR) is a method to measure supply chain serving the business process framework, performance indicators and unique technologies to support communication and collaboration among supply chain partners. The objective of this paper is to measure Supply Chain Management performance by using SCOR version 11.0 for production typology of MTS-MTO in Indonesian Batik Industry. This research combines SCOR's model and System Dynamics in order to predict the complex activities on batik industry. The hybrid SCOR-SD could identify the interaction among five attributes with the associated variables simultaneously. The results are obtained after the performance of lean production application is increased and the targets are achieved, even exceeding the target. For reliability attributes that associated with perfect order fulfilment started from 2015 to 2019 respectively are calculated as 80.06%, 103.53%, 105.58%, 93.76%, and 72.17%. Responsiveness attributes associated with the order fulfilment cycle time, respectively 122.45%, 149.10%, 159.26%, 131.53%, and 119.36%. Attributes associated with the total cost of service charge respectively 93.46%, 93.53%, 93.45%, 93.49, and 93.49%. Attributes associated with cash management assets to cash cycle time in a row were 160%, 153%, 146.3%, 150%, and 126.7%. The latter attribute is agility attributes associated with supply chain flexibility upside respectively 100%, 87.2%, 100%, 82%, and 82%.

A novel approach for inventory problem in the pharmaceutical supply chain.

PubMed

Candan, Gökçe; Yazgan, Harun Reşit

2016-02-24

In pharmaceutical enterprises, keeping up with global market conditions is possible with properly selected supply chain management policies. Generally; demand-driven classical supply chain model is used in the pharmaceutical industry. In this study, a new mathematical model is developed to solve an inventory problem in the pharmaceutical supply chain. Unlike the studies in literature, the "shelf life and product transition times" constraints are considered, simultaneously, first time in the pharmaceutical production inventory problem. The problem is formulated as a mixed-integer linear programming (MILP) model with a hybrid time representation. The objective is to maximize total net profit. Effectiveness of the proposed model is illustrated considering a classical and a vendor managed inventory (VMI) supply chain on an experimental study. To show the effectiveness of the model, an experimental study is performed; which contains 2 different supply chain policy (Classical and VMI), 24 and 30 months planning horizon, 10 and 15 different cephalosporin products. Finally the mathematical model is compared to another model in literature and the results show that proposed model is superior. This study suggest a novel approach for solving pharmaceutical inventory problem. The developed model is maximizing total net profit while determining optimal production plan under shelf life and product transition constraints in the pharmaceutical industry. And we believe that the proposed model is much more closed to real life unlike the other studies in literature.

Developing a Suitable Model for Supplier Selection Based on Supply Chain Risks: An Empirical Study from Iranian Pharmaceutical Companies

PubMed Central

Mehralian, Gholamhossein; Rajabzadeh Gatari, Ali; Morakabati, Mohadese; Vatanpour, Hossein

2012-01-01

The supply chain represents the critical link between the development of new product and the market in pharmaceutical industry. Over the years, improvements made in supply chain operations have focused largely on ways to reduce cost and gain efficiencies in scale. In addition, powerful regulatory and market forces have provided new incentives for pharmaceutical firms to basically rethink the way they produce and distribute products, and also to re-imagine the role of the supply chain in driving strategic growth, brand differentiation and economic value in the health continuum. The purpose of this paper is to formulate basic factors involved in risk analysis of pharmaceutical industry, and also determine the effective factors involved in suppliers selection and their priorities. This paper is based on the results of literature review, experts’ opinion acquisition, statistical analysis and also using MADM models on data gathered from distributed questionnaires. The model consists of the following steps and components: first factors involved in to supply chain risks are determined. Based on them a framework is considered. According the result of statistical analysis and MADM models the risk factors are formulated. The paper determines the main components and influenceial factors involving in the supply chain risks. Results showed that delivery risk can make an important contribution to mitigate the risk of pharmaceutical industry. PMID:24250442

Researches in agri-food supply chain: A bibliometric study

NASA Astrophysics Data System (ADS)

Hisjam, Muhammad; Sutopo, Wahyudi

2017-11-01

Agri-food is very important for human being. Problems in managing agri-food are very complicated. There are many entities involved in managing agri-food with conflict of interest between them makes the problems become more complicated. Using supply chain approaches in agri-food will help solving the problems. The purpose of this paper is to show that the publications in agri-food supply chain research area are still promising and to show the research trend in agri-food supply chain. The study was a bibliometric study by using some queries on the website with the largest database of peer-reviewed literature. The queries were using various categories and refinements. Firstly the study was exploring all publications in this research area in some categories and then divided the duration into 2 intervals. The last query was to know how many publications are review type publications. The results show that the number of the publications with agri-food supply chain topics are still limited, and tend to increase. It means researches in this area are still promising. The results also show the most publications are from which source title, country, and affiliation. The results also show the research trend in this research area. The quantities of review type publications in agri-food supply chain are still few. It shows the need for more review type publications in this area.

The importance of carbon footprint estimation boundaries.

PubMed

Matthews, H Scott; Hendrickson, Chris T; Weber, Christopher L

2008-08-15

Because of increasing concern about global climate change and carbon emissions as a causal factor, many companies and organizations are pursuing "carbon footprint" projects to estimate their own contributions to global climate change. Protocol definitions from carbon registries help organizations analyze their footprints. The scope of these protocols varies but generally suggests estimating only direct emissions and emissions from purchased energy, with less focus on supply chain emissions. In contrast approaches based on comprehensive environmental life-cycle assessment methods are available to track total emissions across the entire supply chain, and experience suggests that following narrowly defined estimation protocols will generally lead to large underestimates of carbon emissions for providing products and services. Direct emissions from an industry are, on average, only 14% of the total supply chain carbon emissions (often called Tier 1 emissions), and direct emissions plus industry energy inputs are, on average, only 26% of the total supply chain emissions (often called Tier 1 and 2 emissions). Without a full knowledge of their footprints, firms will be unable to pursue the most cost-effective carbon mitigation strategies. We suggest that firms use the screening-level analysis described here to set the bounds of their footprinting strategy to ensure that they do not ignore large sources of environmental effects across their supply chains. Such information can help firms pursue carbon and environmental emission mitigation projects not only within their own plants but also across their supply chain.

Supply Chain Sourcing Game: A Negotiation Exercise

ERIC Educational Resources Information Center

Gumus, Mehmet; Love, Ernie C.

2013-01-01

This article introduces an exercise that simulates the negotiation process in a dynamic supply chain. The retailer and wholesaler roles are assigned to student groups who negotiate supply contracts in a number of rounds during a class period. Each group makes pricing, inventory, and ordering decision concurrently, and competes with others to…

Global supply chain management/transportation : building a global network of scholars and educators : phase I

DOT National Transportation Integrated Search

2008-01-01

During the project period two conferences--1st Symposium and Workshop in Global : Supply Chain (http://www.business.utoledo.edu/scm) at University of Toledo, Toledo, : OH, USA (October 6-7, 2007) and 2nd Symposium and Workshop in Global Supply : Chai...

76 FR 24848 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

...: USDA Web Based Supply Chain Management System (WBSCMs). OMB Control Number: 0581--NEW. Summary of... using the secure Web Based Supply Chain Management System (WBSCM). Vendors must be registered, and have... assists AMS with making a determination whether a business is viable and capable of supplying product to...

Design of supply chain in fuzzy environment

NASA Astrophysics Data System (ADS)

Rao, Kandukuri Narayana; Subbaiah, Kambagowni Venkata; Singh, Ganja Veera Pratap

2013-05-01

Nowadays, customer expectations are increasing and organizations are prone to operate in an uncertain environment. Under this uncertain environment, the ultimate success of the firm depends on its ability to integrate business processes among supply chain partners. Supply chain management emphasizes cross-functional links to improve the competitive strategy of organizations. Now, companies are moving from decoupled decision processes towards more integrated design and control of their components to achieve the strategic fit. In this paper, a new approach is developed to design a multi-echelon, multi-facility, and multi-product supply chain in fuzzy environment. In fuzzy environment, mixed integer programming problem is formulated through fuzzy goal programming in strategic level with supply chain cost and volume flexibility as fuzzy goals. These fuzzy goals are aggregated using minimum operator. In tactical level, continuous review policy for controlling raw material inventories in supplier echelon and controlling finished product inventories in plant as well as distribution center echelon is considered as fuzzy goals. A non-linear programming model is formulated through fuzzy goal programming using minimum operator in the tactical level. The proposed approach is illustrated with a numerical example.

An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices

NASA Astrophysics Data System (ADS)

Shahlan, M. Z.; Sidek, A. A.; Suffian, S. A.; Hazza, M. H. F. A.; Daud, M. R. C.

2018-01-01

In this paper, climate change and global warming are the biggest current issues in the industrial sectors. The green supply chain managements (GSCM) is one of the crucial input to these issues. Effective GSCM can potentially secure the organization’s competitive advantage and improve the environmental performance of the network activities. In this study, the aim is to investigate and examine how a small and medium enterprises (SMEs) stakeholder pressure and top management influence green supply chain management practices. The study is further advance green supply chain management research in Malaysia focusing on SMEs manufacturing sector using structural equation modelling. Structural equation modelling is a multivariate statistical analysis technique used to examine structural relationship. It is the combination of factor analysis and multi regression analysis and used to analyse structural relationship between measure variable and latent factor. This research found that top management support and stakeholder pressure is the major influence for SMEs to adopt green supply chain management. The research also found that top management is fully mediate with the relationship between stakeholder pressure and monitoring supplier environmental performance.

Determinants of supply chain coordination of milk and dairy industries in Ethiopia: a case of Addis Ababa and its surroundings.

PubMed

Lemma, Habtamu Regassa; Singh, Rajwinder; Kaur, Navjot

2015-01-01

Coordination of different business activities among units becomes vital as organizations pay much attention to their core activities. Thus, their fruitfulness constantly relies on their capacity to coordinate their internal and external activities in the supply chain outside their own boundaries. Giving consideration to these obvious reasons, this paper aims to investigate the determinants of supply chain coordination of milk and dairy industries. The data were collected from 330 milk suppliers, processors, and retailers in the central part of Ethiopia. The structural equation modeling has been employed to develop the structural relationship between key constructs and measured variables. In total, 15 measured variables for coordination in the supply chain have been identified. These are further grouped into four factors namely, non-price coordination, price coordination, relationships and product development decision. It has been observed that the implementation of these factors could maximize the coordination linkage among supply chain members. Thus, dairy sectors should take the identified coordination factors into account in each of their business dealings.

Complex dynamics of a MC-MS pricing model for a risk-averse supply chain with after-sale investment

NASA Astrophysics Data System (ADS)

Ma, Junhai; Sun, Lijian

2015-09-01

In this paper, we investigate the pricing strategy of the manufacturers and that of a common retailer, including their after-sale investment in a risk-averse supply chain. As the demand is not always for sure, the supply chain follows Manufacturers Cooperating (MC) and Manufacturers Stackelberg (MS). The main objective of the paper is to investigate the influence of the decision parameters such as the after-sale investment, wholesale price adjustment speed and risk preference on the stability and utilities of the risk-averse supply chain. The dynamic phenomena, such as the bifurcation, chaos and sensitivity to initial values are analyzed with 2D-bifurcation diagrams, double largest Lyapunov exponent and basins of attraction. The study shows that the faster the adjustment speed is, the more profits the retailer can make, but on the other hand, it is no good to manufacturers. Risk tolerance levels (RM and RR) affect the utility of the manufacturers and that of the retailer differently. A feedback control method is used to control the chaos in the supply chain.

77 FR 26564 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... National Strategy for Global Supply Chain Security. The work of the Trade Facilitation Subcommittee... Strategy for Global Supply Chain Security as it relates to the Committee's effort to solicit, consolidate... chain management project. The Anti-Dumping/Countervailing Duties Subcommittee work on educational...

76 FR 71994 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-21

... recommendations on how to proceed on those topics: Subcommittee: The Global Supply Chain Security Land Border... document for public release.--Report by the Global Supply Chain Security Air Cargo Subcommittee. Status... surveys (IPR Partnership Program Survey and IPR Distribution Chain Management survey). Subcommittee...

Improvement of flavor profiles in Chinese rice wine by creating fermenting yeast with superior ethanol tolerance and fermentation activity.

PubMed

Yang, Yijin; Xia, Yongjun; Lin, Xiangna; Wang, Guangqiang; Zhang, Hui; Xiong, Zhiqiang; Yu, Haiyan; Yu, Jianshen; Ai, Lianzhong

2018-06-01

Producing alcoholic beverages with novel flavor are desirable for winemakers. We created fermenting yeast with superior ethanol tolerance and fermentation activity to improve the flavor profiles of Chinese rice wine. Strategies of ethanol domestication, ultraviolet mutagenesis (UV) and protoplast fusion were conducted to create yeast hybrids with excellent oenological characteristic. The obtained diploid hybrid F23 showed a cell viability of 6.2% under 25% ethanol, whereas its diploid parental strains could not survive under 20% ethanol. During Chinese rice wine-making, compared to diploid parents, F23 produced 7.07%-12.44% higher yield of ethanol. Flavor analysis indicated that the total content of flavor compounds in F23 wine was 19.99-26.55% higher than that of parent wines. Specifically, F23 exhibited higher capacity in producing 2-phenylethanol, short-chain and long-chain fatty-acid ethyl-ester than diploid parents. Compared to diploid parents, F23 introduced more flavor contributors with odor activity values (OAVs) above one to Chinese rice wine, and those contributors were found with higher OAVs. Based on principal component analysis (PCA), the flavor characteristic of F23 wine was similar to each of parent wine. Additionally, sensory evaluation showed that F23 wine was highly assessed for its intensive levels in fruit-aroma, alcohol-aroma and mouthfeel. Hybrid F23 not only displayed superior flavor production and oenological performance in making Chinese rice wine, but also could act as potential "mixed-like" starter to enrich wine style and differentiation. Copyright © 2018 Elsevier Ltd. All rights reserved.

Structural and phase transition changes of sodium dodecyl sulfate micellar solution in alcohols probed by small-angle neutron scattering (SANS)

NASA Astrophysics Data System (ADS)

Putra, Edy Giri Rachman; Patriati, Arum

2015-04-01

Small-angle neutron scattering (SANS) measurements on 0.3M sodium dodecyl sulfate (SDS) micellar solutions have been performed in the presence of n-alcohols, from ethanol to decanol at different alcohol concentrations, 2-10 wt%. The ellipsoid micellar structure which occurred in the 0.3M SDS in aqueous solution with the size range of 30-50 Å has different behavior at various hydrocarbon chain length and concentration of alcohols. At low concentration and short chain-length of alcohols, such as ethanol, propanol, and butanol, the size of micelles reduced and had a spherical-like structure. The opposite effect occurred as medium to long chain alcohols, such as hexanol, octanol and decanol was added into the 0.3M SDS micellar solutions. The micelles structure changed to be more elongated in major axis and then crossed the critical phase transition from micellar solution into liquid crystal phase as lamellar structure emerged by further addition of alcohols. The inter-lamellar distances were also depending on the hydrocarbon chain length and concentration of alcohols. In the meantime, the persistent micellar structures occurred in addition of medium chain of n-alcohol, pentanol at all concentrations.

48 CFR 212.301 - Solicitation provisions and contract clauses for the acquisition of commercial items.

Code of Federal Regulations, 2014 CFR

2014-10-01

... section 1092 of Pub. L. 108-375. (lxi) Use the provision at 252.239-7017, Notice of Supply Chain Risk, as... or as a supply. (lxii) Use the clause at 252.239-7018, Supply Chain Risk, as prescribed in 239.7306(b... development or delivery of any information technology, whether acquired as a service or as a supply. (lxiii...

Coordinating a Supply Chain with Price and Advertisement Dependent Stochastic Demand

PubMed Central

Li, Liying; Wang, Yong; Yan, Xiaoming

2013-01-01

This paper investigates pricing and ordering as well as advertising coordination issues in a single-manufacturer single-retailer supply chain, where the manufacturer sells a newsvendor-type product through the retailer who faces a stochastic demand depending on both retail price and advertising expenditure. Under the assumption that the market demand has a multiplicative functional form, the Stackelberg and cooperative game models are developed, and the closed form solution to each model is provided as well. Comparisons and insights are presented. We show that a properly designed revenue-cost-sharing contract can achieve supply chain coordination and lead to a Pareto improving win-win situation for channel members. We also discuss the allocation of the extra joint profit according to individual supply chain members' risk preferences and negotiating powers. PMID:24453832

The role of supply-chain initiatives in reducing deforestation

NASA Astrophysics Data System (ADS)

Lambin, Eric F.; Gibbs, Holly K.; Heilmayr, Robert; Carlson, Kimberly M.; Fleck, Leonardo C.; Garrett, Rachael D.; le Polain de Waroux, Yann; McDermott, Constance L.; McLaughlin, David; Newton, Peter; Nolte, Christoph; Pacheco, Pablo; Rausch, Lisa L.; Streck, Charlotte; Thorlakson, Tannis; Walker, Nathalie F.

2018-01-01

A major reduction in global deforestation is needed to mitigate climate change and biodiversity loss. Recent private sector commitments aim to eliminate deforestation from a company's operations or supply chain, but they fall short on several fronts. Company pledges vary in the degree to which they include time-bound interventions with clear definitions and criteria to achieve verifiable outcomes. Zero-deforestation policies by companies may be insufficient to achieve broader impact on their own due to leakage, lack of transparency and traceability, selective adoption and smallholder marginalization. Public-private policy mixes are needed to increase the effectiveness of supply-chain initiatives that aim to reduce deforestation. We review current supply-chain initiatives, their effectiveness, and the challenges they face, and go on to identify knowledge gaps for complementary public-private policies.

An IT-enabled supply chain model: a simulation study

NASA Astrophysics Data System (ADS)

Cannella, Salvatore; Framinan, Jose M.; Barbosa-Póvoa, Ana

2014-11-01

During the last decades, supply chain collaboration practices and the underlying enabling technologies have evolved from the classical electronic data interchange (EDI) approach to a web-based and radio frequency identification (RFID)-enabled collaboration. In this field, most of the literature has focused on the study of optimal parameters for reducing the total cost of suppliers, by adopting operational research (OR) techniques. Herein we are interested in showing that the considered information technology (IT)-enabled structure is resilient, that is, it works well across a reasonably broad range of parameter settings. By adopting a methodological approach based on system dynamics, we study a multi-tier collaborative supply chain. Results show that the IT-enabled supply chain improves operational performance and customer service level. Nonetheless, benefits for geographically dispersed networks are of minor entity.

A Review of Theoretical Frameworks for Supply Chain Integration

NASA Astrophysics Data System (ADS)

Thoo, AC; Tan, LC; Sulaiman, Z.; Zakuan, N.

2017-06-01

In a world of fierce competition and business driven by speed to market, good quality and low costs, this environment requires firms to have a source of competitive advantage that is inimitable and non-substitutable. For a supply chain integration (SCI) strategy to achieve sustainable competitive advantage it must be non-substitutable, inimitable, path-dependent and developed over time. Also, an integrated supply chain framework is needed to tie the whole network together in order to reduce perennial supply chain challenges such as functional silos, poor transparency of knowledge and information and the inadequate formation of appropriate customer and supplier relationships. Therefore, this paper aims to evaluate the competitive impact of a SCI strategy on firm performance using the theory of Resource-based View (RBV) and relational view.

Optimizing decentralized production-distribution planning problem in a multi-period supply chain network under uncertainty

NASA Astrophysics Data System (ADS)

Nourifar, Raheleh; Mahdavi, Iraj; Mahdavi-Amiri, Nezam; Paydar, Mohammad Mahdi

2017-09-01

Decentralized supply chain management is found to be significantly relevant in today's competitive markets. Production and distribution planning is posed as an important optimization problem in supply chain networks. Here, we propose a multi-period decentralized supply chain network model with uncertainty. The imprecision related to uncertain parameters like demand and price of the final product is appropriated with stochastic and fuzzy numbers. We provide mathematical formulation of the problem as a bi-level mixed integer linear programming model. Due to problem's convolution, a structure to solve is developed that incorporates a novel heuristic algorithm based on Kth-best algorithm, fuzzy approach and chance constraint approach. Ultimately, a numerical example is constructed and worked through to demonstrate applicability of the optimization model. A sensitivity analysis is also made.

The Impacts of Regulations and Financial Development on the Operations of Supply Chains with Greenhouse Gas Emissions

PubMed Central

Xiao, Zhuang; Tian, Yixiang; Yuan, Zheng

2018-01-01

To establish a micro foundation to understand the impacts of greenhouse gas (GHG) emission regulations and financial development levels on firms’ GHG emissions, we build a two-stage dynamic game model to incorporate GHG emission regulations (in terms of an emission tax) and financial development (represented by the corresponding financing cost) into a two-echelon supply chain. With the subgame perfect equilibrium, we identify the conditions to determine whether an emission regulatory policy and/or financial development can affect GHG emissions in the supply chain. We also reveal the impacts of the strictness of GHG emission regulation, the financial development level, and the unit GHG emission rate on the operations of the supply chain and the corresponding profitability implications. Managerial insights are also discussed. PMID:29470451

Defining the Synthetic Biology Supply Chain.

PubMed

Frazar, Sarah L; Hund, Gretchen E; Bonheyo, George T; Diggans, James; Bartholomew, Rachel A; Gehrig, Lindsey; Greaves, Mark

Several recent articles have described risks posed by synthetic biology and spurred vigorous discussion in the scientific, commercial, and government communities about how to best detect, prevent, regulate, and respond to these risks. The Pacific Northwest National Laboratory's (PNNL) deep experience working with dual-use technologies for the nuclear industry has shown that analysis of supply chains can reveal security vulnerabilities and ways to mitigate security risk without hindering beneficial research and commerce. In this article, a team of experts in synthetic biology, data analytics, and national security describe the overall supply chain surrounding synthetic biology to illustrate new insights about the effectiveness of current regulations, the possible need for different screening approaches, and new technical solutions that could help identify or mitigate risks in the synthetic biology supply chain.

Coordinating a supply chain with price and advertisement dependent stochastic demand.

PubMed

Li, Liying; Wang, Yong; Yan, Xiaoming

2013-01-01

This paper investigates pricing and ordering as well as advertising coordination issues in a single-manufacturer single-retailer supply chain, where the manufacturer sells a newsvendor-type product through the retailer who faces a stochastic demand depending on both retail price and advertising expenditure. Under the assumption that the market demand has a multiplicative functional form, the Stackelberg and cooperative game models are developed, and the closed form solution to each model is provided as well. Comparisons and insights are presented. We show that a properly designed revenue-cost-sharing contract can achieve supply chain coordination and lead to a Pareto improving win-win situation for channel members. We also discuss the allocation of the extra joint profit according to individual supply chain members' risk preferences and negotiating powers.

Ethanol Production from Traditional and Emerging Raw Materials

NASA Astrophysics Data System (ADS)

Rudolf, Andreas; Karhumaa, Kaisa; Hahn-Hägerdal, Bärbel

The ethanol industry of today utilizes raw materials rich in saccharides, such as sugar cane or sugar beets, and raw materials rich in starch, such as corn and wheat. The concern about supply of liquid transportation fuels, which has brought the crude oil price above 100 /barrel during 2006, together with the concern about global warming, have turned the interest towards large-scale ethanol production from lignocellulosic materials, such as agriculture and forestry residues. Baker's yeast Saccharomyces cerevisiae is the preferred fermenting microorganism for ethanol production because of its superior and well-documented industrial performance. Extensive work has been made to genetically improve S. cerevisiae to enable fermentation of lignocellulosic raw materials. Ethanolic fermentation processes are conducted in batch, fed-batch, or continuous mode, with or without cell recycling, the relative merit of which will be discussed.

Estimating the costs of the vaccine supply chain and service delivery for selected districts in Kenya and Tanzania.

PubMed

Mvundura, Mercy; Lorenson, Kristina; Chweya, Amos; Kigadye, Rosemary; Bartholomew, Kathryn; Makame, Mohammed; Lennon, T Patrick; Mwangi, Steven; Kirika, Lydia; Kamau, Peter; Otieno, Abner; Murunga, Peninah; Omurwa, Tom; Dafrossa, Lyimo; Kristensen, Debra

2015-05-28

Having data on the costs of the immunization system can provide decision-makers with information to benchmark the costs when evaluating the impact of new technologies or programmatic innovations. This paper estimated the supply chain and immunization service delivery costs and cost per dose in selected districts in Kenya and Tanzania. We also present operational data describing the supply chain and service delivery points (SDPs). To estimate the supply chain costs, we collected resource-use data for the cold chain, distribution system, and health worker time and per diems paid. We also estimated the service delivery costs, which included the time cost of health workers to provide immunization services, and per diems and transport costs for outreach sessions. Data on the annual quantities of vaccines distributed to each facility, and the occurrence and duration of stockouts were collected from stock registers. These data were collected from the national store, 2 regional and 4 district stores, and 12 SDPs in each country for 2012. Cost per dose for the supply chain and immunization service delivery were estimated. The average annual costs per dose at the SDPs were $0.34 (standard deviation (s.d.) $0.18) for Kenya when including only the vaccine supply chain costs, and $1.33 (s.d. $0.82) when including immunization service delivery costs. In Tanzania, these costs were $0.67 (s.d. $0.35) and $2.82 (s.d. $1.64), respectively. Both countries experienced vaccine stockouts in 2012, bacillus Calmette-Guérin vaccine being more likely to be stocked out in Kenya, and oral poliovirus vaccine in Tanzania. When stockouts happened, they usually lasted for at least one month. Tanzania made investments in 2011 in preparation for planned vaccine introductions, and their supply chain cost per dose is expected to decline with the new vaccine introductions. Immunization service delivery costs are a significant portion of the total costs at the SDPs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evolution and Development of Effective Feedstock Specifications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garold Gresham; Rachel Emerson; Amber Hoover

The U.S. Department of Energy promotes the production of a range of liquid fuels and fuel blend stocks from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of technology in biomass collection, conversion, and sustainability. As part of its involvement in this program, the Idaho National Laboratory (INL) investigates the feedstock logistics economics and sustainability of these fuels. The 2012 feedstock logistics milestone demonstrated that for high-yield areas that minimize the transportation distances of a low-density, unstable biomass, we could achieve a delivered cost of $35/ton. Based on current conventional equipment and processes, the 2012more » logistics design is able to deliver the volume of biomass needed to fulfill the 2012 Renewable Fuel Standard’s targets for ethanol. However, the Renewable Fuel Standard’s volume targets are continuing to increase and are expected to peak in 2022 at 36 billion gallons. Meeting these volume targets and achieving a national-scale biofuels industry will require expansion of production capacity beyond the 2012 Conventional Feedstock Supply Design Case to access diverse available feedstocks, regardless of their inherent ability to meet preliminary biorefinery quality feedstock specifications. Implementation of quality specifications (specs), as outlined in the 2017 Design Case – “Feedstock Supply System Design and Economics for Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels” (in progress), requires insertion of deliberate, active quality controls into the feedstock supply chain, whereas the 2012 Conventional Design only utilizes passive quality controls.« less

78 FR 71581 - Procurement List; Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... Prime Vendor Supply Chain Management Service [to support production, assembly, receipt, storage... Army, W6QK ACC-APG Natick, Natick, MA. Service Type/Location: Integrated Prime Vendor, Supply Chain...

Paige Jadun | NREL

Science.gov Websites

dynamics. She has performed research in sustainable mobility, network optimization, supply chain analysis Experience Supply Chain Design Consultant, LLamasoft, Ann Arbor, MI Featured Publications Laura J

Salmonella serotype distribution in the Dutch broiler supply chain.

PubMed

van Asselt, E D; Thissen, J T N M; van der Fels-Klerx, H J

2009-12-01

Salmonella serotype distribution can give insight in contamination routes and persistence along a production chain. Therefore, it is important to determine not only Salmonella prevalence but also to specify the serotypes involved at the different stages of the supply chain. For this purpose, data from a national monitoring program in the Netherlands were used to estimate the serotype distribution and to determine whether this distribution differs for the available sampling points in the broiler supply chain. Data covered the period from 2002 to 2005, all slaughterhouses (n = 22), and the following 6 sampling points: departure from hatchery, arrival at the farm, departure from the farm, arrival at the slaughterhouse, departure from the slaughterhouse, and end of processing. Furthermore, retail data for 2005 were used for comparison with slaughterhouse data. The following serotypes were followed throughout the chain: Salmonella Enteritidis, Salmonella Typhimurium, Salmonella Paratyphi B var. Java (Salmonella Java), Salmonella Infantis, Salmonella Virchow, and Salmonella Mbandaka. Results showed that serotype distribution varied significantly throughout the supply chain (P < 0.05). Main differences were found at the farm and at the slaughterhouse (within one stage), and least differences were found between departure from one stage and arrival at the next stage. The most prominent result was the increase of Salmonella Java at farm level. This serotype remained the most prominent pathogen throughout the broiler supply chain up to the retail phase.

Developing a Comprehensive Approach Could Help DOD Better Manage National Security Risks in the Supply Chain

DTIC Science & Technology

2016-02-01

functionality in weapon system components. Many steps in the rare earths supply chain, such as mining , are conducted in China, a situation that may pose...functionality in weapon systems components.1 Many steps in the rare earths supply chain, such as mining and refining the ore, are primarily conducted outside...are difficult and costly to mine and process. Rare earth elements are Page 5 GAO-16-161 Rare Earth Materials often classified as either

Exploratory Analysis of Supply Chains in the Defense Industrial Base

DTIC Science & Technology

2012-04-01

Instruments Industry Group 382: Laboratory Apparatus and Analytical, Optical, Measuring, and Controlling Instruments 3821 Laboratory Apparatus and Furniture ...I N S T I T U T E F O R D E F E N S E A N A LY S E S Exploratory Analysis of Supply Chains in the Defense Industrial Base James R. Dominy...contract DASW01-04-C-0003, AH-7-3315, “Exploratory Analysis of Supply Chains in the Defense Industrial Base,” for the Director, Industrial Policy. The

Decentralized supply chain network design: monopoly, duopoly and oligopoly competitions under uncertainty

NASA Astrophysics Data System (ADS)

Seyedhosseini, Seyed Mohammad; Fahimi, Kaveh; Makui, Ahmad

2017-12-01

This paper presents the competitive supply chain network design problem in which n decentralized supply chains simultaneously enter the market with no existing rival chain, shape their networks and set wholesale and retail prices in competitive mode. The customer demand is elastic and price dependent, customer utility function is based on the Hoteling model and the chains produce identical or highly substitutable products. We construct a solution algorithm based on bi-level programming and possibility theory. In the proposed bi-level model, the inner part sets the prices based on simultaneous extra- and Stackleberg intra- chains competitions, and the outer part shapes the networks in cooperative competitions. Finally, we use a real-word study to discuss the effect of the different structures of the competitors on the equilibrium solution. Moreover, sensitivity analyses are conducted and managerial insights are offered.

Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels

DOEpatents

Lilga, Michael A.; Hallen, Richard T.; Albrecht, Karl O.; Cooper, Alan R.; Frye, John G.; Ramasamy, Karthikeyan Kallupalayam

2018-04-03

Systems, processes, and catalysts are disclosed for obtaining fuel and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.