Early assessment of Integrated Multi-satellite Retrievals for Global Precipitation Measurement over China

NASA Astrophysics Data System (ADS)

Guo, Hao; Chen, Sheng; Bao, Anming; Behrangi, Ali; Hong, Yang; Ndayisaba, Felix; Hu, Junjun; Stepanian, Phillip M.

2016-07-01

Two post-real time precipitation products from the Integrated Multi-satellite Retrievals for Global Precipitation Measurement Mission (IMERG) are systematically evaluated over China with China daily Precipitation Analysis Product (CPAP) as reference. The IMERG products include the gauge-corrected IMERG product (IMERG_Cal) and the version of IMERG without direct gauge correction (IMERG_Uncal). The post-research TRMM Multisatellite Precipitation Analysis version 7 (TMPA-3B42V7) is also evaluated concurrently with IMERG for better perspective. In order to be consistent with CPAP, the evaluation and comparison of selected products are performed at 0.25° and daily resolutions from 12 March 2014 through 28 February 2015. The results show that: Both IMERG and 3B42V7 show similar performances. Compared to IMERG_Uncal, IMERG_Cal shows significant improvement in overall and conditional bias and in the correlation coefficient. Both IMERG_Cal and IMERG_Uncal perform relatively poor in winter and over-detect slight precipitation events in northwestern China. As an early validation of the GPM-era IMERG products that inherit the TRMM-era global satellite precipitation products, these findings will provide useful feedbacks and insights for algorithm developers and data users over China and beyond.

Image processing system performance prediction and product quality evaluation

NASA Technical Reports Server (NTRS)

Stein, E. K.; Hammill, H. B. (Principal Investigator)

1976-01-01

The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

Performance evaluation and specification of trackless tack.

DOT National Transportation Integrated Search

2016-09-01

Several trackless tack products have come to market in Texas; however, there are currently no specifications to : ensure the products have trackless properties and adequate bond strength. The objectives of this project were to : (1) evaluate the trac...

Risk management in technovigilance: construction and validation of a medical-hospital product evaluation instrument.

PubMed

Kuwabara, Cleuza Catsue Takeda; Evora, Yolanda Dora Martinez; de Oliveira, Márcio Mattos Borges

2010-01-01

With the continuous incorporation of health technologies, hospital risk management should be implemented to systemize the monitoring of adverse effects, performing actions to control and eliminate their damage. As part of these actions, Technovigilance is active in the procedures of acquisition, use and quality control of health products and equipment. This study aimed to construct and validate an instrument to evaluate medical-hospital products. This is a quantitative, exploratory, longitudinal and methodological development study, based on the Six Sigma quality management model, which has as its principle basis the component stages of the DMAIC Cycle. For data collection and content validation, the Delphi technique was used with professionals from the Brazilian Sentinel Hospital Network. It was concluded that the instrument developed permitted the evaluation of the product, differentiating between the results of the tested brands, in line with the initial study goal of qualifying the evaluations performed.

Uniform peanut performance test 2017

USDA-ARS?s Scientific Manuscript database

The Uniform Peanut Performance Tests (UPPT) are designed to evaluate the commercial potential of advanced breeding peanut lines not formally released. The tests are performed in ten locations across the peanut production belt. In this study, 2 controls and 14 entries were evaluated at 8 locations....

Product evaluation based in the association between intuition and tasks.

PubMed

Almeida e Silva, Caio Márcio; Okimoto, Maria Lúcia L R; Albertazzi, Deise; Calixto, Cyntia; Costa, Humberto

2012-01-01

This paper explores the importance of researching the intuitiveness in the product use. It approaches the intuitiveness influence for users that already had a visual experience of the product. Finally, it is suggested the use of a table that relates the tasks performed while using a product, the features for an intuitive use and the performance metric "task success".

Growth performance of fast growing broilers reared under different types of production systems with outdoor access: Implications for organic and alternative production systems

USDA-ARS?s Scientific Manuscript database

Outdoor access is an important part of organic and free range poultry production, yet there is limited information on the impact of various housing and production systems on growth performance and colonization of foodborne pathogens. Therefore, the primary purpose of this study was to evaluate the ...

Study on evaluation index system of operational performance of municipal wastewater treatment plants in China

NASA Astrophysics Data System (ADS)

Xiaoxin, Zhang; Jin, Huang; Ling, Lin; Yan, Li

2018-05-01

According to the undeveloped evaluation method for the operational performance of the municipal wastewater treatment plants, this paper analyzes the policies related to sewage treatment industry based on the investigation of the municipal wastewater treatment plants. The applicable evaluation method for the operational performance was proposed from environmental protection performance, resources and energy consumption, technical and economic performance, production management and main equipment, providing a reliable basis for scientific evaluation of the operation as well as improving the operational performance of municipal wastewater treatment plant.

Evaluation of a Stirling Solar Dynamic System for Lunar Oxygen Production

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Wong, Wayne A.

2006-01-01

An evaluation of a solar concentrator-based system for producing oxygen from the lunar regolith was performed. The system utilizes a solar concentrator mirror to provide thermal energy for the oxygen production process as well as thermal energy to power a Stirling heat engine for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The oxygen production method utilized in the analysis was the hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process rate effected the oxygen production rate.

Evaluation of food drying with air dehumidification system: a short review

NASA Astrophysics Data System (ADS)

Djaeni, M.; Utari, F. D.; Sasongko, S. B.; Kumoro, A. C.

2018-01-01

Energy efficient drying for food and agriculture products resulting high quality products has been an important issue. Currently, about 50% of total energy for postharvest treatment was used for drying. This paper presents the evaluation of new approach namely air dehumidification system with zeolite for food drying. Zeolite is a material having affinity to water in which reduced the moisture in air. With low moisture content and relative humidity, the air can improve driving force for drying even at low temperature. Thus, the energy efficiency can be potentially enhanced and the product quality can be well retained. For proving the hypothesis, the paddy and onion have been dried using dehumidified air. As performance indicators, the drying time, product quality, and heat efficiency were evaluated. Results indicated that the drying with zeolite improved the performances significantly. At operating temperature ranging 50 - 60°C, the efficiency of drying system can reach 75% with reasonable product quality.

Effect of crude glycerol-derived inhibitors on ethanol production by Enterobacter aerogenes.

PubMed

Lee, Sang Jun; Kim, Sung Bong; Kang, Seong Woo; Han, Sung Ok; Park, Chulhwan; Kim, Seung Wook

2012-01-01

In this study, ethanol production from pure and crude glycerol using Enterobacter aerogenes ATCC 29007 was evaluated under anaerobic culture conditions. Inhibitory effects of substrate concentrations, pH, and salt concentrations were investigated based on crude glycerol components. Ethanol production was performed with pure glycerol concentrations ranging from 5 to 30 g/L to evaluate the effects of substrate concentration and osmotic pressure. The consumed glycerol was 5-14.33 g/L, and the yield of ethanol was higher than 0.75 mol ethanol/mol glycerol after 24 h of cultivation. To evaluate the inhibitory effects of salts (NaCl and KCl), experiments were performed with 0-20 g/L of each salt. Inhibitory effects of salts were strongest at high salt concentrations. The inhibitory effect of pH was performed in the pH range 4-10, and cell growth and ethanol production were highest at pH 5-6. Also, ethanol production was slightly inhibited at low concentration of crude glycerol comparison with pure glycerol. However, significant inhibitory effects were not observed at 1.5 and 2% crude glycerol which showed higher ethanol production compared to pure glycerol.

Evaluation of cleaner production options in dyeing and printing industry: Using combination weighting method

NASA Astrophysics Data System (ADS)

Kang, Hong; Zhang, Yun; Hou, Haochen; Sun, Xiaoyang; Qin, Chenglu

2018-03-01

The textile industry has a high environmental impact so that implementing cleaner production audit is an effective way to achieve energy conservation and emissions reduction. But the evaluation method in current cleaner production audit divided the evaluation of CPOs into two parts: environment and economy. The evaluation index system was constructed from three criteria of environment benefits, economy benefits and product performance; weights of five indicators were determined by combination weights of entropy method and factor weight sorting method. Then efficiencies were evaluated comprehensively. The results showed that the best alkali recovery option was the nanofiltration membrane method (S=0.80).

A Conceptual Framework for Evaluating Higher Education Institutions

ERIC Educational Resources Information Center

Chinta, Ravi; Kebritchi, Mansureh; Ellias, Janelle

2016-01-01

Purpose: Performance evaluation is a topic that has been researched and practiced extensively in business organizations but has received scant attention in higher education institutions. A review of literature revealed that context, input, process, product (CIPP) model is an appropriate performance evaluation model for higher education…

21 CFR 26.37 - Confidence building activities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS, AND CERTAIN MEDICAL DEVICE PRODUCT EVALUATION REPORTS: UNITED STATES AND THE EUROPEAN... assessment bodies (CAB's) to perform quality system or product evaluations to the specifications of the...

Assurance Policy Evaluation - Spacecraft and Strategic Systems

DTIC Science & Technology

2014-09-17

electromechanical (EEE) parts, software, design and workmanship, work instructions, manufacturing and tooling, cleanrooms, electrostatic discharge ...T9001B.  An external group, called the Evaluation and Assessment Team, made up of product assurance subject matter experts from NSWC Corona performs...NSWC, Corona and SSP Technical Branch(es). The FTPE, performed every 3 years, is an objective evaluation of facility performance to assure proper

A Systems Framework for Assessing Plumbing Products-Related Water Conservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Alison; Dunham Whitehead, Camilla; Lutz, James

2011-12-02

Reducing the water use of plumbing products—toilets, urinals, faucets, and showerheads —has been a popular conservation measure. Improved technologies have created opportunities for additional conservation in this area. However, plumbing products do not operate in a vacuum. This paper reviews the literature related to plumbing products to determine a systems framework for evaluating future conservation measures using these products. The main framework comprises the following categories: water use efficiency, product components, product performance, source water, energy, and plumbing/sewer infrastructure. This framework for analysis provides a starting point for professionals considering future water conservation measures to evaluate the need for additionalmore » research, collaboration with other standards or codes committees, and attachment of additional metrics to water use efficiency (such as performance).« less

Evaluating Faculty Work: Expectations and Standards of Faculty Performance in Research Universities

ERIC Educational Resources Information Center

Hardre, Patricia; Cox, Michelle

2009-01-01

Expectations and the way they are communicated can influence employees' motivation and performance. Previous research has demonstrated individual effects of workplace climate and individual differences on faculty productivity. The present study focused on the characteristics of institutional performance standards, evaluation processes and…

The Evaluation of Higher Education Expenditure Performance and Investment Mechanism Reform

ERIC Educational Resources Information Center

Wang, De; Fu, Meiying

2009-01-01

Along with the reform of Chinese Government public finance, higher education belongs to the public product, gradually changes from "fund investment management" to the "expenditure performance management". The evaluation of expenditure performance system becomes the key point of higher education investment mechanism reform. This…

Designing fire safe interiors.

PubMed

Belles, D W

1992-01-01

Any product that causes a fire to grow large is deficient in fire safety performance. A large fire in any building represents a serious hazard. Multiple-death fires almost always are linked to fires that grow quickly to a large size. Interior finishes have large, continuous surfaces over which fire can spread. They are regulated to slow initial fire growth, and must be qualified for use on the basis of fire tests. To obtain meaningful results, specimens must be representative of actual installation. Variables--such as the substrate, the adhesive, and product thickness and density--can affect product performance. The tunnel test may not adequately evaluate some products, such as foam plastics or textile wall coverings, thermoplastic materials, or materials of minimal mass. Where questions exist, products should be evaluated on a full-scale basis. Curtains and draperies are examples of products that ignite easily and spread flames readily. The present method for testing curtains and draperies evaluates one fabric at a time. Although a fabric tested alone may perform well, fabrics that meet test standards individually sometimes perform poorly when tested in combination. Contents and furnishings constitute the major fuels in many fires. Contents may involve paper products and other lightweight materials that are easily ignited and capable of fast fire growth. Similarly, a small source may ignite many items of furniture that are capable of sustained fire growth. Upholstered furniture can reach peak burning rates in less than 5 minutes. Furnishings have been associated with many multiple-death fires.(ABSTRACT TRUNCATED AT 250 WORDS)

An evaluation of improved structural materials in marine piling.

DOT National Transportation Integrated Search

1980-11-01

A study to evaluate the production and field performance of marine piling fabricated with improved structural materials is currently being performed by the Oregon State Highway Division under the sponsorship of the Federal Highway Administration. In ...

40 CFR 63.5850 - How do I conduct performance tests, performance evaluations, and design evaluations?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Pollutants: Reinforced Plastic Composites Production Testing and Initial Compliance Requirements § 63.5850... exhaust stream exceeds five, you must take into account the use of multiple chromatographic columns and...

40 CFR 63.5850 - How do I conduct performance tests, performance evaluations, and design evaluations?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Pollutants: Reinforced Plastic Composites Production Testing and Initial Compliance Requirements § 63.5850... exhaust stream exceeds five, you must take into account the use of multiple chromatographic columns and...

40 CFR 63.5850 - How do I conduct performance tests, performance evaluations, and design evaluations?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollutants: Reinforced Plastic Composites Production Testing and Initial Compliance Requirements § 63.5850... exhaust stream exceeds five, you must take into account the use of multiple chromatographic columns and...

The Relationship of Teacher Evaluation Scores Generated by a Process-Product Evaluation Instrument to Selected Variables.

ERIC Educational Resources Information Center

Tadlock, James; Nesbit, Lamar

The Jackson Municipal Separate School District, Mississippi, has instituted a mixed-criteria reduction-in-force procedure emphasizing classroom performance to a greater degree than seniority, certification, and staff development participation. The district evaluation process--measuring classroom teaching performance--generated data for the present…

40 CFR 63.5850 - How do I conduct performance tests, performance evaluations, and design evaluations?

Code of Federal Regulations, 2010 CFR

2010-07-01

...: Reinforced Plastic Composites Production Testing and Initial Compliance Requirements § 63.5850 How do I... exhaust stream exceeds five, you must take into account the use of multiple chromatographic columns and...

40 CFR 63.5850 - How do I conduct performance tests, performance evaluations, and design evaluations?

Code of Federal Regulations, 2011 CFR

2011-07-01

...: Reinforced Plastic Composites Production Testing and Initial Compliance Requirements § 63.5850 How do I... exhaust stream exceeds five, you must take into account the use of multiple chromatographic columns and...

Vapor Phase Catalytic Ammonia Reduction

NASA Technical Reports Server (NTRS)

Flynn, Michael T.; Harper, Lynn D. (Technical Monitor)

1994-01-01

This paper discusses the development of a Vapor Phase Catalytic Ammonia Reduction (VPCAR) teststand and the results of an experimental program designed to evaluate the potential of the technology as a water purification process. In the experimental program the technology is evaluated based upon product water purity, water recovery rate, and power consumption. The experimental work demonstrates that the technology produces high purity product water and attains high water recovery rates at a relatively high specific power consumption. The experimental program was conducted in 3 phases. In phase I an Igepon(TM) soap and water mixture was used to evaluate the performance of an innovative Wiped-Film Rotating-Disk evaporator and associated demister. In phase II a phenol-water solution was used to evaluate the performance of the high temperature catalytic oxidation reactor. In phase III a urine analog was used to evaluate the performance of the combined distillation/oxidation functions of the processor.

Investigating longevity of corrosion inhibitors and performance of deicer products under storage or after pavement application.

DOT National Transportation Integrated Search

2011-06-01

This study evaluated the longevity of corrosion inhibitors and the performance of inhibited deicer products under storage or after pavement application. No significant degradation of corrosion inhibitor or loss of chlorides was seen during the months...

Development of field performance evaluation tools and program for pavement marking materials : technical report

DOT National Transportation Integrated Search

2011-03-01

Historically the prequalification or selection of pavement marking materials (PMMs) is mainly based on : product specifications and lab testing, which do not correlate well with the field performance of the products. : On the other hand, there is no ...

A New Tool for Identifying Research Standards and Evaluating Research Performance

ERIC Educational Resources Information Center

Bacon, Donald R.; Paul, Pallab; Stewart, Kim A.; Mukhopadhyay, Kausiki

2012-01-01

Much has been written about the evaluation of faculty research productivity in promotion and tenure decisions, including many articles that seek to determine the rank of various marketing journals. Yet how faculty evaluators combine journal quality, quantity, and author contribution to form judgments of a scholar's performance is unclear. A…

21 CFR 26.39 - Equivalence assessment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS... perform any type of quality system or product evaluation covered by this subpart and with regard to any... any type of quality system or product evaluation. (b) The parties shall allow CAB's not listed for...

77 FR 26583 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... Production Act of 1993--Cooperative Research Group on Evaluation of Distributed Leak Detection Systems... Institute-- Cooperative Research Group on Evaluation of Distributed Leak Detection Systems--Performance... detection systems for offshore pipelines. Laboratory testing of distributed temperature and distributed...

Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies

NASA Astrophysics Data System (ADS)

Osezua Aikhuele, Daniel; Mohd Turan, Faiz

2016-02-01

The instability in today's market and the emerging demands for mass customized products by customers, are driving companies to seek for cost effective and time efficient improvements in their production system and this have led to real pressure for the adaptation of new developmental architecture and operational parameters to remain competitive in the market. Among such developmental architecture adopted, is the integration of lean thinking in the product development process. However, due to lack of clear understanding of the lean performance and its measurements, many companies are unable to implement and fully integrate the lean principle into their product development process and without a proper performance measurement, the performance level of the organizational value stream will be unknown and the specific area of improvement as it relates to the LPD program cannot be tracked. Hence, it will result in poor decision making in the LPD implementation. This paper therefore seeks to present a conceptual model for evaluation of LPD performances by identifying and analysing the core existing LPD enabler (Chief Engineer, Cross-functional teams, Set-based engineering, Poka-yoke (mistakeproofing), Knowledge-based environment, Value-focused planning and development, Top management support, Technology, Supplier integration, Workforce commitment and Continuous improvement culture) for assessing the LPD performance.

Stocker performance and production in mixed tall fescue-bermudagrass pastures of the Southern Piedmont USA

USDA-ARS?s Scientific Manuscript database

Stocker performance and production from mixed cool- and warm-season perennial pastures are important determinants of agricultural sustainability that can be influenced by management. We evaluated the factorial combination of three sources of nutrient application (inorganic only, organic + inorganic...

47 CFR 2.805 - Operation of radio frequency products prior to equipment authorization.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Evaluation of performance and determination of customer acceptability, during developmental, design, or pre... performance and determination of customer acceptability, during developmental, design, or pre-production... under the authority of an experimental radio service authorization issued under part 5 of this chapter...

Risk mitigation process for utilization of commercial off-the-shelf (COTS) parts in CCD camera for military applications

NASA Astrophysics Data System (ADS)

Ahmad, Anees; Batcheldor, Scott; Cannon, Steven C.; Roberts, Thomas E.

2002-09-01

This paper presents the lessons learned during the design and development of a high performance cooled CCD camera for military applications utilizing common commercial off the shelf (COTS) parts. Our experience showed that concurrent evaluation and testing of high risk COTS must be performed to assess their performance over the required temperature range and other special product requirements such as fuel vapor compatibility, EMI and shock susceptibility, etc. Technical, cost and schedule risks for COTS parts must also be carefully evaluated. The customer must be involved in the selection and evaluation of such parts so that the performance limitations of the selected parts are clearly understood. It is equally important to check with vendors on the availability and obsolescence of the COTS parts being considered since the electronic components are often replaced by newer, better and cheaper models in a couple of years. In summary, this paper addresses the major benefits and risks associated with using commercial and industrial parts in military products, and suggests a risk mitigation approach to ensure a smooth development phase, and predictable performance from the end product.

The Practical Concept of an Evaluator and Its Use in the Design of Training Systems.

ERIC Educational Resources Information Center

Gibbons, Andrew S.; Rogers, Dwayne H.

1991-01-01

The evaluator is an instructional system product that provides practice, testing capability, and feedback in a way not yet seen in computer-assisted instruction. Training methods using an evaluator contain scenario-based simulation exercises, followed by a critique of performance. A focus on competency-based education and performance makes the…

Fire performance of oriented strandboard

Treesearch

Robert H. White; Jerrold E. Winandy

2006-01-01

Wood-based composites represent a continuously increasing share of the wood products market. Commercial construction will be important for future expansion of the structural panels market. Use of engineered wood products as an alternative to traditional solid wood lumber is also increasing. A recent series of cone calorimeter tests evaluated the performance of several...

Preliminary evaluation of military, commercial and novel skin decontamination products against a chemical warfare agent simulant (methyl salicylate).

PubMed

Matar, Hazem; Guerreiro, Antonio; Piletsky, Sergey A; Price, Shirley C; Chilcott, Robert P

2015-08-13

Rapid decontamination is vital to alleviate adverse health effects following dermal exposure to hazardous materials. There is an abundance of materials and products which can be utilised to remove hazardous materials from the skin. In this study, a total of 15 products were evaluated, 10 of which were commercial or military products and five were novel (molecular imprinted) polymers. The efficacies of these products were evaluated against a 10 µl droplet of 14 C-methyl salicylate applied to the surface of porcine skin mounted on static diffusion cells. The current UK military decontaminant (Fuller's earth) performed well, retaining 83% of the dose over 24 h and served as a benchmark to compare with the other test products. The five most effective test products were Fuller's earth (the current UK military decontaminant), Fast-Act® and three novel polymers [based on itaconic acid, 2-trifluoromethylacrylic acid and N,N-methylenebis(acrylamide)]. Five products (medical moist-free wipes, 5% FloraFree™ solution, normal baby wipes, baby wipes for sensitive skin and Diphotérine™) enhanced the dermal absorption of 14 C-methyl salicylate. Further work is required to establish the performance of the most effective products identified in this study against chemical warfare agents.

Preliminary evaluation of military, commercial and novel skin decontamination products against a chemical warfare agent simulant (methyl salicylate).

PubMed

Matar, Hazem; Guerreiro, Antonio; Piletsky, Sergey A; Price, Shirley C; Chilcott, Robert P

2016-01-01

Rapid decontamination is vital to alleviate adverse health effects following dermal exposure to hazardous materials. There is an abundance of materials and products which can be utilised to remove hazardous materials from the skin. In this study, a total of 15 products were evaluated, 10 of which were commercial or military products and five were novel (molecular imprinted) polymers. The efficacies of these products were evaluated against a 10 µl droplet of (14)C-methyl salicylate applied to the surface of porcine skin mounted on static diffusion cells. The current UK military decontaminant (Fuller's earth) performed well, retaining 83% of the dose over 24 h and served as a benchmark to compare with the other test products. The five most effective test products were Fuller's earth (the current UK military decontaminant), Fast-Act® and three novel polymers [based on itaconic acid, 2-trifluoromethylacrylic acid and N,N-methylenebis(acrylamide)]. Five products (medical moist-free wipes, 5% FloraFree™ solution, normal baby wipes, baby wipes for sensitive skin and Diphotérine™) enhanced the dermal absorption of (14)C-methyl salicylate. Further work is required to establish the performance of the most effective products identified in this study against chemical warfare agents.

A Group Wage Incentive System for Production Workers at Pearl Harbor Naval Shipyard: Test and Evaluation

DTIC Science & Technology

1985-09-01

assume they will result in a sweatshop atmosphere. Workers may have fears that management will tighten standards when performance improves or...the shop’s performance can have a major impact on overall shipyard performance. In addition, the potential for accurate performance measurement was... impact of this experimental productivity improvement technique on participants’ job attitudes is supported in the literature. White et al. (in

Vocational Training and Agricultural Productivity: Evidence from Rice Production in Vietnam

ERIC Educational Resources Information Center

Ulimwengu, John; Badiane, Ousmane

2010-01-01

The paper examines the impact of farmers' educational attainment on agricultural productivity. More specifically, it evaluates how farmers with vocational training perform compared to those with traditional educational training. A stochastic production frontier and inefficiency effects model is estimated using nationally representative household…

49 CFR 236.909 - Minimum performance standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... product will not result in risk that exceeds the previous condition. The railroad shall determine, prior... product will not result in risk that exceeds the previous condition. In evaluating the sufficiency of the... factors pertinent to evaluation of risk assessments, listed in § 236.913(g)(2). (c) What is the scope of a...

49 CFR 236.909 - Minimum performance standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... product will not result in risk that exceeds the previous condition. The railroad shall determine, prior... product will not result in risk that exceeds the previous condition. In evaluating the sufficiency of the... factors pertinent to evaluation of risk assessments, listed in § 236.913(g)(2). (c) What is the scope of a...

49 CFR 236.909 - Minimum performance standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... product will not result in risk that exceeds the previous condition. The railroad shall determine, prior... product will not result in risk that exceeds the previous condition. In evaluating the sufficiency of the... factors pertinent to evaluation of risk assessments, listed in § 236.913(g)(2). (c) What is the scope of a...

49 CFR 236.909 - Minimum performance standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... product will not result in risk that exceeds the previous condition. The railroad shall determine, prior... product will not result in risk that exceeds the previous condition. In evaluating the sufficiency of the... factors pertinent to evaluation of risk assessments, listed in § 236.913(g)(2). (c) What is the scope of a...

Diversity in livestock resources in pastoral systems in Africa.

PubMed

Kaufmann, B A; Lelea, M A; Hulsebusch, C G

2016-11-01

Pastoral systems are important producers and repositories of livestock diversity. Pastoralists use variability in their livestock resources to manage high levels of environmental variability in economically advantageous ways. In pastoral systems, human-animal-environment interactions are the basis of production and the key to higher productivity and efficiency. In other words, pastoralists manage a production system that exploits variability and keeps production costs low. When differentiating, characterising and evaluating pastoral breeds, this context-specific, functional dimension of diversity in livestock resources needs to be considered. The interaction of animals with their environment is determined not only by morphological and physiological traits but also by experience and socially learned behaviour. This high proportion of non-genetic components determining the performance of livestock means that current models for analysing livestock diversity and performance, which are based on genetic inheritance, have limited ability to describe pastoral performance. There is a need for methodological innovations to evaluate pastoral breeds and animals, since comparisons based on performance 'under optimal conditions' are irrelevant within this production system. Such innovations must acknowledge that livestock or breed performance is governed by complex human-animal-environment interactions, and varies through time and space due to the mobile and seasonal nature of the pastoral system. Pastoralists' breeding concepts and selection strategies seem to be geared towards improving their animals' capability to exploit variability, by - among other things - enhancing within-breed diversity. In-depth studies of these concepts and strategies could contribute considerably towards developing methodological innovations for the characterisation and evaluation of pastoral livestock resources.

Evaluation of modern cotton harvest systems on irrigated cotton: harvester performance

USDA-ARS?s Scientific Manuscript database

Picker and stripper harvest systems were evaluated on production-scale irrigated cotton on the High Plains of Texas over three harvest seasons. Observations on harvester performance, including time-in-motion, harvest loss, seed cotton composition, and turnout, were conducted at seven locations with...

Evaluation of satellite rainfall estimates for drought and flood monitoring in Mozambique

USGS Publications Warehouse

Tote, Carolien; Patricio, Domingos; Boogaard, Hendrik; van der Wijngaart, Raymond; Tarnavsky, Elena; Funk, Christopher C.

2015-01-01

Satellite derived rainfall products are useful for drought and flood early warning and overcome the problem of sparse, unevenly distributed and erratic rain gauge observations, provided their accuracy is well known. Mozambique is highly vulnerable to extreme weather events such as major droughts and floods and thus, an understanding of the strengths and weaknesses of different rainfall products is valuable. Three dekadal (10-day) gridded satellite rainfall products (TAMSAT African Rainfall Climatology And Time-series (TARCAT) v2.0, Famine Early Warning System NETwork (FEWS NET) Rainfall Estimate (RFE) v2.0, and Climate Hazards Group InfraRed Precipitation with Stations (CHIRPS)) are compared to independent gauge data (2001–2012). This is done using pairwise comparison statistics to evaluate the performance in estimating rainfall amounts and categorical statistics to assess rain-detection capabilities. The analysis was performed for different rainfall categories, over the seasonal cycle and for regions dominated by different weather systems. Overall, satellite products overestimate low and underestimate high dekadal rainfall values. The RFE and CHIRPS products perform as good, generally outperforming TARCAT on the majority of statistical measures of skill. TARCAT detects best the relative frequency of rainfall events, while RFE underestimates and CHIRPS overestimates the rainfall events frequency. Differences in products performance disappear with higher rainfall and all products achieve better results during the wet season. During the cyclone season, CHIRPS shows the best results, while RFE outperforms the other products for lower dekadal rainfall. Products blending thermal infrared and passive microwave imagery perform better than infrared only products and particularly when meteorological patterns are more complex, such as over the coastal, central and south regions of Mozambique, where precipitation is influenced by frontal systems.

State-of-the-art software for window energy-efficiency rating and labeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arasteh, D.; Finlayson, E.; Huang, J.

1998-07-01

Measuring the thermal performance of windows in typical residential buildings is an expensive proposition. Not only is laboratory testing expensive, but each window manufacturer typically offers hundreds of individual products, each of which has different thermal performance properties. With over a thousand window manufacturers nationally, a testing-based rating system would be prohibitively expensive to the industry and to consumers. Beginning in the early 1990s, simulation software began to be used as part of a national program for rating window U-values. The rating program has since been expanded to include Solar Hear Gain Coefficients and is now being extended to annualmore » energy performance. This paper describes four software packages available to the public from Lawrence Berkeley National Laboratory (LBNL). These software packages are used to evaluate window thermal performance: RESFEN (for evaluating annual energy costs), WINDOW (for calculating a product`s thermal performance properties), THERM (a preprocessor for WINDOW that determines two-dimensional heat-transfer effects), and Optics (a preprocessor for WINDOW`s glass database). Software not only offers a less expensive means than testing to evaluate window performance, it can also be used during the design process to help manufacturers produce windows that will meet target specifications. In addition, software can show small improvements in window performance that might not be detected in actual testing because of large uncertainties in test procedures.« less

75 FR 47592 - Final Test Guideline; Product Performance of Skin-applied Insect Repellents of Insect and Other...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... considerations affecting the design and conduct of repellent studies when human subjects are involved. Any... recommendations for the design and execution of studies to evaluate the performance of pesticide products intended... recommends appropriate study designs and methods for selecting subjects, statistical analysis, and reporting...

The Performance Appraisal: A Crucial Business Process and Product.

ERIC Educational Resources Information Center

Ewald, Helen Rothschild; McCallum, Virginia

1989-01-01

Discusses the process of work performance self-assessment, noting the importance of understanding performance appraisal as a rhetorical situation. Describes the process of setting goals, establishing criteria, assessing performance, and adapting to an organizational format. Provides examples of performance evaluation charts. (MM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perrin, Tess E.; Davis, Robert G.; Wilkerson, Andrea M.

This GATEWAY project evaluated four field installations to better understand the long-term performance of a number of LED products, which can hopefully stimulate improvements in designing, manufacturing, specifying, procuring, and installing LED products. Field studies provide the opportunity to discover and investigate issues that cannot be simulated or uncovered in a laboratory, but the installed performance over time of commercially available LED products has not been well documented. Improving long-term performance can provide both direct energy savings by reducing the need to over-light to account for light loss and indirect energy savings through better market penetration due to SSL’s competitivemore » advantages over less-efficient light source technologies. The projects evaluated for this report illustrate that SSL use is often motivated by advantages other than energy savings, including maintenance savings, easier integration with control systems, and improved lighting quality.« less

Developing low-input, high-biomass, perennial cropping systems for advanced biofuels in the Intermountain West

USDA-ARS?s Scientific Manuscript database

Lignocellulosic biomass studies are being conducted to evaluate perennial herbaceous feedstocks and to determine their field performance and adaptation potential for biomass production in the Intermountain West. Field performance of four biomass entries and four inputs are being evaluated over a lo...

The ambiguities of performance-based governance reforms in Italy: Reviving the fortunes of evaluation and performance measurement.

PubMed

Marra, Mita

2018-08-01

Over the past two decades, Italy's administrative reforms have institutionalized evaluation to improve program effectiveness, staff productivity, and results-driven accountability against waste and corruption. Across ministries, regional governments, universities, schools and environmental protection agencies, seemingly unexpected consequences have emerged out of the implementation of performance measurement and evaluation regimes within public organizations. Formal compliance to legally binding evaluation procedures, judicially-sanctioned managerial accountability and lack of cross-agency coordination coupled with long-standing cultural separations among evaluators are some of the ambiguities associated with a performance-based governance system within Italian public administration. Building upon the 'new governane theory,' and qualitative fieldwork, I explore the political consequences of evaluation and performance measurement for possible improvements. From a normative perspective, greater integration between program evaluation and performance measurement can support organizational learning and democratic accountability both at the central and local level. Copyright © 2017 Elsevier Ltd. All rights reserved.

Estimating productivity costs in health economic evaluations: a review of instruments and psychometric evidence.

PubMed

Tang, Kenneth

2015-01-01

Health economic evaluations (i.e. cost-effectiveness appraisal of an intervention) are useful aids for decision makers responsible for the allocation of scarce healthcare resources. The relevance of including health-related productivity costs (or benefits) in these evaluations is increasingly recognized and, as such, reliable and valid instruments to quantify productivity costs are needed. Over the years, a number of work productivity instruments have emerged in the literature, along with a growing body of psychometric evidence. The overall aim of this paper is to provide a review of available instruments with potential for estimating health-related productivity costs. This included the Health and Labor Questionnaire, Health and Work Performance Questionnaire, Health-Related Productivity Questionnaire Diary, Productivity and Disease Questionnaire, Quantity and Quality method, Stanford Presenteeism Scale 13, Valuation of Lost Productivity, Work and Health Interview, Work Limitations Questionnaire, Work Productivity and Activity Impairment Questionnaire, and Work Productivity Short Inventory. Critical discussions on the instruments' overall strengths and limitations, applicability for health economic evaluations, as well as the methodological quality of existing psychometric evidence were provided. Lastly, a set of reflective questions were proposed for users to consider when selecting an instrument for health economic evaluations.

Simulation and testing of pyramid and barrel vault skylights

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGowan, A.G.; Desjarlais, A.O.; Wright, J.L.

1998-10-01

The thermal performance of fenestration in commercial buildings can have a significant effect on building loads--yet there is little information on the performance of these products. With this in mind, ASHRAE TC 4.5, Fenestration, commissioned a research project involving test and simulation of commercial fenestration systems. The objectives of ASHRAE Research Project 877 were: to evaluate the thermal performance (U-factors) of commonly used commercial glazed roof and wall assemblies; to obtain a better fundamental understanding of the heat transfer processes that occur in these specialty fenestration products; to develop correlations for natural-convection heat transfer in complex glazing cavities; to developmore » a methodology for evaluating complex fenestration products, suitable for inclusion in ASHRAE Standard 142P (ASHRAE 1996); and to generate U-factors for common commercial fenestration products, suitable for inclusion in the ASHRAE Handbook--Fundamentals. This paper describes testing and simulation of pyramid and barrel vault skylight specimens and provides guidelines for modeling these systems based on the validated results.« less

Sugar cane fiber geotextiles : production, evaluation, and field study : technical summary.

DOT National Transportation Integrated Search

1996-08-01

The sugar cane fiber geotexiles performed as well as the commercial products and exhibited grass propagation and slope protection equivalent to other products. Sugar cane fiber mats were superior in conformation to the slope even after heavy rains. B...

Knee extension isometric torque production differences based on verbal motivation given to introverted and extroverted female children.

PubMed

McWhorter, J Wesley; Landers, Merrill; Young, Daniel; Puentedura, E Louie; Hickman, Robbin A; Brooksby, Candi; Liveratti, Marc; Taylor, Lisa

2011-08-01

To date, little research has been conducted to test the efficacy of different forms of motivation based on a female child's personality type. The purpose of this study was to evaluate the ability of female children to perform a maximal knee extension isometric torque test with varying forms of motivation, based on the child's personality type (introvert vs. extrovert). The subjects were asked to perform a maximal isometric knee extension test under three different conditions: 1) with no verbal motivation, 2) with verbal motivation from the evaluator only, and 3) with verbal motivation from a group of their peers and the evaluator combined. A 2×3 mixed ANOVA was significant for an interaction (F 2,62=17.530; p<0.0005). Post hoc testing for the introverted group showed that scores without verbal motivation were significantly higher than with verbal motivation from the evaluator or the evaluator plus the peers. The extroverted group revealed that scores with verbal motivation from the evaluator or the evaluator plus the peers were significantly higher than without verbal motivation. Results suggest that verbal motivation has a varying effect on isometric knee extension torque production in female children with different personality types. Extroverted girls perform better with motivation, whereas introverted girls perform better without motivation from others.

Operational and environmental performance in China's thermal power industry: Taking an effectiveness measure as complement to an efficiency measure.

PubMed

Wang, Ke; Zhang, Jieming; Wei, Yi-Ming

2017-05-01

The trend toward a more fiercely competitive and strictly environmentally regulated electricity market in several countries, including China has led to efforts by both industry and government to develop advanced performance evaluation models that adapt to new evaluation requirements. Traditional operational and environmental efficiency measures do not fully consider the influence of market competition and environmental regulations and, thus, are not sufficient for the thermal power industry to evaluate its operational performance with respect to specific marketing goals (operational effectiveness) and its environmental performance with respect to specific emissions reduction targets (environmental effectiveness). As a complement to an operational efficiency measure, an operational effectiveness measure not only reflects the capacity of an electricity production system to increase its electricity generation through the improvement of operational efficiency, but it also reflects the system's capability to adjust its electricity generation activities to match electricity demand. In addition, as a complement to an environmental efficiency measure, an environmental effectiveness measure not only reflects the capacity of an electricity production system to decrease its pollutant emissions through the improvement of environmental efficiency, but it also reflects the system's capability to adjust its emissions abatement activities to fulfill environmental regulations. Furthermore, an environmental effectiveness measure helps the government regulator to verify the rationality of its emissions reduction targets assigned to the thermal power industry. Several newly developed effectiveness measurements based on data envelopment analysis (DEA) were utilized in this study to evaluate the operational and environmental performance of the thermal power industry in China during 2006-2013. Both efficiency and effectiveness were evaluated from the three perspectives of operational, environmental, and joint adjustments to each electricity production system. The operational and environmental performance changes over time were also captured through an effectiveness measure based on the global Malmquist productivity index. Our empirical results indicated that the performance of China's thermal power industry experienced significant progress during the study period and that policies regarding the development and regulation of the thermal power industry yielded the expected effects. However, the emissions reduction targets assigned to China's thermal power industry are loose and conservative. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of multiple precipitation products across Mainland China using the triple collocation method without ground truth

NASA Astrophysics Data System (ADS)

Tang, G.; Li, C.; Hong, Y.; Long, D.

2017-12-01

Proliferation of satellite and reanalysis precipitation products underscores the need to evaluate their reliability, particularly over ungauged or poorly gauged regions. However, it is really challenging to perform such evaluations over regions lacking ground truth data. Here, using the triple collocation (TC) method that is capable of evaluating relative uncertainties in different products without ground truth, we evaluate five satellite-based precipitation products and comparatively assess uncertainties in three types of independent precipitation products, e.g., satellite-based, ground-observed, and model reanalysis over Mainland China, including a ground-based precipitation dataset (the gauge based daily precipitation analysis, CGDPA), the latest version of the European reanalysis agency reanalysis (ERA-interim) product, and five satellite-based products (i.e., 3B42V7, 3B42RT of TMPA, IMERG, CMORPH-CRT, PERSIANN-CDR) on a regular 0.25° grid at the daily timescale from 2013 to 2015. First, the effectiveness of the TC method is evaluated by comparison with traditional methods based on ground observations in a densely gauged region. Results show that the TC method is reliable because the correlation coefficient (CC) and root mean square error (RMSE) are close to those based on the traditional method with a maximum difference only up to 0.08 and 0.71 (mm/day) for CC and RMSE, respectively. Then, the TC method is applied to Mainland China and the Tibetan Plateau (TP). Results indicate that: (1) the overall performance of IMERG is better than the other satellite products over Mainland China; (2) over grid cells without rain gauges in the TP, IMERG and ERA show better performance than CGDPA, indicating the potential of remote sensing and reanalysis data over these regions and the inherent uncertainty of CGDPA due to interpolation using sparsely gauged data; (3) both TMPA-3B42 and CMORPH-CRT have some unexpected CC values over certain grid cells that contain water bodies, reaffirming the overestimation of precipitation over inland water bodies. Overall, the TC method provides not only reliable cross-validation results of precipitation estimates over Mainland China but also a new perspective as to compressively assess multi-source precipitation products, particularly over poorly gauged regions.

PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas

NASA Astrophysics Data System (ADS)

Hauger, J. S.; Borton, D. N.

1982-07-01

A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.

PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas

NASA Technical Reports Server (NTRS)

Hauger, J. S.; Borton, D. N.

1982-01-01

A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.

Composition/Property Relationships for the Phase 2 Am-Cm Glass Variability Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peeler, D.

The objective of this research was to evaluate the effect of compositional uncertainties on the primary processing and product performance criteria for potential glasses to stabilize the Tank 17.1 Am-Cm solution and to identify the AGCR in which glasses simultaneously meet both process and product performance criteria as defined for Phase 2.

Effects of Focus of Attention on Tone Production in Trained Singers

ERIC Educational Resources Information Center

Atkins, Rebecca L.

2017-01-01

Motor performance in familiar tasks is often advantaged when performers focus on the effects of their movements rather than on the movements themselves. But, this phenomenon has yet to be studied systematically in the context of vocal production. I evaluated 20 trained singers' vocal tone as they varied their focus of attention. Each participant…

Evaluation of the Botanical Authenticity and Phytochemical Profile of Black Cohosh Products by High-Performance Liquid Chromatography with Selected Ion Monitoring Liquid Chromatography–Mass Spectrometry

PubMed Central

Jiang, Bei; Kronenberg, Fredi; Nuntanakorn, Paiboon; Qiu, Ming-Hua; Kennelly, Edward J.

2011-01-01

Black cohosh (Actaea racemosa L., syn. Cimicifuga racemosa L.) has become increasingly popular as a dietary supplement in the United States for the treatment of symptoms related to menopause, but the botanical authenticity of most products containing black cohosh has not been evaluated, nor is manufacturing highly regulated in the United States. In this study, 11 black cohosh products were analyzed for triterpene glycosides, phenolic constituents, and formononetin by high-performance liquid chromatography–photodiode array detection and a new selected ion monitoring liquid chromatography–mass spectrometry method. Three of the 11 products were found to contain the marker compound cimifugin and not cimiracemoside C, thereby indicating that these plants contain Asian Actaea instead of black cohosh. One product contained both black cohosh and an Asian Actaea species. For the products containing only black cohosh, there was significant product-to-product variability in the amounts of the selected triterpene glycosides and phenolic constituents, and as expected, no formononetin was detected. PMID:16637680

Well-being improvement in a midsize employer: changes in well-being, productivity, health risk, and perceived employer support after implementation of a well-being improvement strategy.

PubMed

Hamar, Brent; Coberley, Carter; Pope, James E; Rula, Elizabeth Y

2015-04-01

To evaluate employee well-being change and associated change in productivity, health risk including biometrics, and workplace support over 2 years after implementation of a well-being improvement strategy. This was an employer case study evaluation of well-being, productivity (presenteeism, absenteeism, and job performance), health risk, and employer support across three employee assessment spanning 2 years. Employee well-being was compared with an independent sample of workers in the community. Well-being and job performance increased and presenteeism and health risk decreased significantly over the 2 years. Employee well-being started lower and increased to exceed community worker averages, approaching significance. Well-being improvement was associated with higher productivity across all measures. Increases in employer support for well-being were associated with improved well-being and productivity. This employer's well-being strategy, including a culture supporting well-being, was associated with improved health and productivity.

Performance of high intensity fed-batch mammalian cell cultures in disposable bioreactor systems.

PubMed

Smelko, John Paul; Wiltberger, Kelly Rae; Hickman, Eric Francis; Morris, Beverly Janey; Blackburn, Tobias James; Ryll, Thomas

2011-01-01

The adoption of disposable bioreactor technology as an alternate to traditional nondisposable technology is gaining momentum in the biotechnology industry. Evaluation of current disposable bioreactors systems to sustain high intensity fed-batch mammalian cell culture processes needs to be explored. In this study, an assessment was performed comparing single-use bioreactors (SUBs) systems of 50-, 250-, and 1,000-L operating scales with traditional stainless steel (SS) and glass vessels using four distinct mammalian cell culture processes. This comparison focuses on expansion and production stage performance. The SUB performance was evaluated based on three main areas: operability, process scalability, and process performance. The process performance and operability aspects were assessed over time and product quality performance was compared at the day of harvest. Expansion stage results showed disposable bioreactors mirror traditional bioreactors in terms of cellular growth and metabolism. Set-up and disposal times were dramatically reduced using the SUB systems when compared with traditional systems. Production stage runs for both Chinese hamster ovary and NS0 cell lines in the SUB system were able to model SS bioreactors runs at 100-, 200-, 2,000-, and 15,000-L scales. A single 1,000-L SUB run applying a high intensity fed-batch process was able to generate 7.5 kg of antibody with comparable product quality. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

Expressions of personhood in Alzheimer's disease: an evaluation of research-based theatre as a pedagogical tool.

PubMed

Kontos, Pia C; Naglie, Gary

2007-07-01

A growing number of scholars are turning to dramatic performance as an innovative approach to disseminating the results of qualitative research. With an interest in this aesthetic practice, the authors transformed ethnographic research on personhood in Alzheimer's disease into a dramatic production, Expressions of Personhood in Alzheimer's , which was performed at the outset of focus group discussions with health practitioners. In this article, the authors report the results of an evaluation of health practitioners' perceptions of this theatrical adaptation as a pedagogical tool. Data from the focus group discussions and a self-administered post-performance survey suggest that there was a perceived relevance of the production to practitioners' practices, an increased understanding gained from attending the production, and a strong endorsement of the use of drama as an educational tool for disseminating information about dementia care.

Evaluation of Rambouillet, Polypay, and Romanov-White Dorper x Rambouillet ewes mated to terminal sires in an extensive rangeland production system: Lamb production

USDA-ARS?s Scientific Manuscript database

Ewe productivity (i.e., total numbers or weight of lamb weaned ÷ number of breeding ewes) is a key indicator of lamb production efficiency. This second-generation study compared various measures of ewe productivity and ewe and lamb performance in an extensive rangeland production system of ewes of 3...

The development of national quality performance standards for disposable absorbent products for adult incontinence.

PubMed

Muller, Nancy; McInnis, Elaine

2013-09-01

Disposable absorbent products are widely used in inpatient care settings and in the community to manage adult urinary and fecal incontinence, but few product standards exist to help guide their production or optimal use. Increasing costs and reduced revenues have caused a number of states to evaluate absorbent product use among persons who receive care at home with the assistance of the Medicaid Waiver Program, further increasing concerns about the lack of product performance standards. To address these issues, the National Association For Continence (NAFC) formed a council of experts and key stakeholders with the objective of establishing national, independent quality performance standards for disposable absorbent products provided by states to Waiver Program recipients. The Council consisted of representatives from five purposefully selected states, technical directors from six nonwoven product manufacturers, an officer of the nonwoven manufactures trade association, a delegate from an academic nursing program and professional societies, a family caregiver, and a patient representative. Following a consensus method and guidelines for use, nine specific recommendations were developed, posted for public comment, and further refined. Final recommendations for product performance assessment include: rewet rate (a measure of a product's ability to withstand multiple incontinent episodes between changes), rate of acquisition (a measure of the speed at which urine is drawn away from the skin by a product, product retention capacity (a measure of a product's capacity to hold fluid without rewetting the skin), sizing options, absorbency levels, product safety, closure technology, breathable zones (a measure of the air permeability across a textile-like fabric at a controlled differential pressure), and elasticity. The Council also set values for and recommended four quantifiable parameters, and the testing methodology associated with each, to help consumers and states evaluate absorbent products (medium adult size): Maximum Rewet Rate: <1.0-2.0 g for briefs and <0.5-1.0 g for underwear; Maximum Rate of Acquisition: <50-60 seconds for briefs and <35-45 seconds for underwear; Minimum Retention Capacity: >250 g for standard briefs or underwear and >400 g for premium briefs or underwear; and Breathability of Zones: Minimum of >100 cubic feet per minute. As these recommendations are implemented, research is needed to evaluate the impact on both cost and quality of care for further refinement and modifications, particularly as technology and knowledge is advanced.

Research strategies for safety evaluation of nanomaterials, part VII: evaluating consumer exposure to nanoscale materials.

PubMed

Thomas, Treye; Thomas, Karluss; Sadrieh, Nakissa; Savage, Nora; Adair, Patricia; Bronaugh, Robert

2006-05-01

Considerable media attention has recently been given to novel applications for products that contain nanoscale materials. These products could have utility in several industries that market consumer products, including textiles, sporting equipment, cosmetics, consumer electronics, and household cleaners. Some of the purported benefits of these products include improved performance, convenience, lower cost, as well as other desirable features, when compared to the conventional products that do not contain nanoscale materials. Although there are numerous likely consumer advantages from products containing nanoscale materials, there is very little information available regarding consumer exposure to the nanoscale materials in these products or any associated risks from these exposures. This paper seeks to review a limited subset of products that contain nanoscale materials, assess the available data for evaluating the consumer exposures and potential hazards associated with these products, and discuss the capacity of U.S. regulatory agencies to address the potential risks associated with these products.

SENTRE and TREND attenuating systems

DOT National Transportation Integrated Search

1991-07-01

The objective of this study was to construct SENTRE and TREND attenuator systems and evaluate their in-service performance as set forth in NCHRP-230 for a period of two years. The evaluation was conducted as part of ADOTs New Product Evaluation Progr...

Early Evaluation of the VIIRS Calibration, Cloud Mask and Surface Reflectance Earth Data Records

NASA Technical Reports Server (NTRS)

Vermote, Eric; Justice, Chris; Csiszar, Ivan

2014-01-01

Surface reflectance is one of the key products fromVIIRS and as withMODIS, is used in developing several higherorder land products. The VIIRS Surface Reflectance (SR) Intermediate Product (IP) is based on the heritageMODIS Collection 5 product (Vermote, El Saleous, & Justice, 2002). The quality and character of surface reflectance depend on the accuracy of the VIIRS Cloud Mask (VCM), the aerosol algorithms and the adequate calibration of the sensor. The focus of this paper is the early evaluation of the VIIRS SR product in the context of the maturity of the operational processing system, the Interface Data Processing System (IDPS). After a brief introduction, the paper presents the calibration performance and the role of the surface reflectance in calibration monitoring. The analysis of the performance of the cloud mask with a focus on vegetation monitoring (no snow conditions) shows typical problems over bright surfaces and high elevation sites. Also discussed is the performance of the aerosol input used in the atmospheric correction and in particular the artifacts generated by the use of the Navy Aerosol Analysis and Prediction System. Early quantitative results of the performance of the SR product over the AERONET sites showthatwith the fewadjustments recommended, the accuracy iswithin the threshold specifications. The analysis of the adequacy of the SR product (Land PEATE adjusted version) in applications of societal benefits is then presented. We conclude with a set of recommendations to ensure consistency and continuity of the JPSS mission with the MODIS Land Climate Data Record.

Evaluation of AMSR2 soil moisture products over the contiguous United States using in situ data from the International Soil Moisture Network

NASA Astrophysics Data System (ADS)

Wu, Qiusheng; Liu, Hongxing; Wang, Lei; Deng, Chengbin

2016-03-01

High quality soil moisture datasets are required for various environmental applications. The launch of the Advanced Microwave Scanning Radiometer 2 (AMSR2) on board the Global Change Observation Mission 1-Water (GCOM-W1) in May 2012 has provided global near-surface soil moisture data, with an average revisit frequency of two days. Since AMSR2 is a new passive microwave system in operation, it is very important to evaluate the quality of AMSR2 products before widespread utilization of the data for scientific research. In this paper, we provide a comprehensive evaluation of the AMSR2 soil moisture products retrieved by the Japan Aerospace Exploration Agency (JAXA) algorithm. The evaluation was performed for a three-year period (July 2012-June 2015) over the contiguous United States. The AMSR2 soil moisture products were evaluated by comparing ascending and descending overpass products to each other as well as comparing them to in situ soil moisture observations of 598 monitoring stations obtained from the International Soil Moisture Network (ISMN). The accuracy of AMSR2 soil moisture product was evaluated against several types of monitoring networks, and for different land cover types and ecoregions. Three performance metrics, including mean difference (MD), root mean squared difference (RMSD), and correlation coefficient (R), were used in our accuracy assessment. Our evaluation results revealed that AMSR2 soil moisture retrievals are generally lower than in situ measurements. The AMSR2 soil moisture retrievals showed the best agreement with in situ measurements over the Great Plains and the worst agreement over forested areas. This study offers insights into the suitability and reliability of AMSR2 soil moisture products for different ecoregions. Although AMSR2 soil moisture retrievals represent useful and effective measurements for some regions, further studies are required to improve the data accuracy.

Evaluation of solar cells for potential space satellite power applications

NASA Technical Reports Server (NTRS)

1977-01-01

The evaluation focused on the following subjects: (1) the relative merits of alternative solar cell materials, based on performance and availability, (2) the best manufacturing methods for various solar cell options and the effects of extremely large production volumes on their ultimate costs and operational characteristics, (3) the areas of uncertainty in achieving large solar cell production volumes, (4) the effects of concentration ratios on solar array mass and system performance, (5) the factors influencing solar cell life in the radiation environment during transport to and in geosynchronous orbit, and (6) the merits of conducting solar cell manufacturing operations in space.

[Using on-farm records to evaluate the reproductive performance in dairy herds].

PubMed

Iwersen, M; Klein, D; Drillich, M

2012-01-01

The designated abolition of the European milk quota system on April 1st 2015 is expected to have tremendous effects on the business environment on most dairy farms. Meanwhile farmers should use weak-point analyses to identify "bottlenecks" within their production and herd management system. As experts in herd health and herd performance, veterinarians should give advice to their clients based on sound analyses of production data. Therefore, accurate and reliable on-farm records are needed. This paper will focus on data management, especially data collection, and will address the concepts of evaluation of reproduction records.

Productive performance, egg quality, and hatching traits of Japanese quail reared under different levels of glycerin.

PubMed

Ghayas, A; Hussain, J; Mahmud, A; Javed, K; Rehman, A; Ahmad, S; Mehmood, S; Usman, M; Ishaq, H M

2017-07-01

This study evaluated subsequent effects of glycerin on productive performance, egg quality, and hatching traits in Japanese quail. A total of 200 birds was arranged according to a completely randomized design into 5 treatment groups having 5 replicates of 8 birds each (6 females and 2 males). Treatments consisted 5 levels of glycerin, i.e., 2.5, 5, 7.5, and 10% and the control group. Birds were fed with different levels of glycerin during a rearing period of 6 wk and their subsequent effects on productive performance, egg quality, and hatching traits were observed. Data were collected regarding productive performance for 16 wk; however, egg quality and hatching traits were recorded during pre-peak (at fourth wk), peak (at 12th wk), and post peak (at 16th wk) phase. Productive performance, egg quality, and hatching traits did not differ significantly throughout the experimental period. It was concluded that glycerin can be used as a replacement energy source, having no effect on productive and reproductive performance in Japanese quail. © 2017 Poultry Science Association Inc.

Using GPS to evaluate productivity and performance of forest machine systems

Treesearch

Steven E. Taylor; Timothy P. McDonald; Matthew W. Veal; Ton E. Grift

2001-01-01

This paper reviews recent research and operational applications of using GPS as a tool to help monitor the locations, travel patterns, performance, and productivity of forest machines. The accuracy of dynamic GPS data collected on forest machines under different levels of forest canopy is reviewed first. Then, the paper focuses on the use of GPS for monitoring forest...

Evaluation of a non-adherent, povidone-iodine dressing in a case series of chronic wounds.

PubMed

Campbell, N; Campbell, D

2013-08-01

Here we report a product evaluation for a non-adherent, povidone-iodine (PVP-I) dressing, determining the clinical need for the product, performing a literature review, clinical evaluation and cost-analysis, and developing a recommendation. This evaluation included 20 patients who experienced dressing pain with the previous antimicrobial dressing. Two patients discontinued the evaluation and four ulcers were non-healing; the remaining wounds closed with the PVP-I dressing. Patients indicated a preference for the PVP-I dressing, primarily due to lack of dressing pain. The PVP-I dressing was also the most cost-efficient.

Children's perception of their synthetically corrected speech production.

PubMed

Strömbergsson, Sofia; Wengelin, Asa; House, David

2014-06-01

We explore children's perception of their own speech - in its online form, in its recorded form, and in synthetically modified forms. Children with phonological disorder (PD) and children with typical speech and language development (TD) performed tasks of evaluating accuracy of the different types of speech stimuli, either immediately after having produced the utterance or after a delay. In addition, they performed a task designed to assess their ability to detect synthetic modification. Both groups showed high performance in tasks involving evaluation of other children's speech, whereas in tasks of evaluating one's own speech, the children with PD were less accurate than their TD peers. The children with PD were less sensitive to misproductions in immediate conjunction with their production of an utterance, and more accurate after a delay. Within-category modification often passed undetected, indicating a satisfactory quality of the generated speech. Potential clinical benefits of using corrective re-synthesis are discussed.

Life Cycle Assessment as a Tool to Enhance the Environmental Performanceof Carbon Nanotube Products: A Review

EPA Science Inventory

The importance of evaluating the environmental performance of emerging carbon nanotube (CNT) products from a life cycle perspective is emphasized in this work. Design, development and deployment of CNT products offer many potential benefits to society, but not without negative im...

Process economics of renewable biorefineries: butanol and ethanol production in integrated bioprocesses from lignocellulosics and other industrial by-products

USDA-ARS?s Scientific Manuscript database

This chapter provides process economic details on production of butanol from lignocellulosic biomass and glycerol in integrated bioreactors where numerous unit operations are combined. In order to compare various processes, economic evaluations were performed using SuperPro Designer Software (versio...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, TETRATEC PTFE PRODUCTS, TETRATEX 6212 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

CALiPER Report 20.2: Dimming, Flicker, and Power Quality Characteristics of LED PAR38 Lamps

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-03-31

This report focuses on the flicker and power quality performance of the Series 20 lamps at full output and various dimmed levels. All of the Series 20 PAR38 lamps that manufacturers claimed to be dimmable (including all halogen lamps) were evaluated individually (one lamp at a time) both on a switch and under the control of a phase-cut dimmer designed for use with "all classes of bulbs." Measurements of luminous flux, flicker, and power quality were taken at 10 target dimmed settings and compared with operation on a switch. Because only a single unit of each product was evaluated onmore » a single dimmer that may or may not have been recommended by its manufacturer, this report focuses on the performance of the products relative to each other, rather than the best-case performance of each lamp or variation in performance delivered from each lamp. Despite these limitations, the results suggest that LED performance is improving, and performance trends are beginning to emerge, perhaps due in part to the identification of preferred LED driver strategies for lamp products.« less

Paving fabrics for reducing reflective cracking

DOT National Transportation Integrated Search

1991-11-01

This research effort was part of ADOT's New Product Evaluation Program. The objective was to evaluate the construction and field performances of three commercially available paving fabrics; Paveprep, Glassgrid, and Tapecoat. The fabrics were designed...

Evaluation Program on the Implementation of Industrial Apprenticeship (Prakerin) in Electrical Engineering

NASA Astrophysics Data System (ADS)

Maulana, I.; Sumarto; Nurafiati, P.; Puspita, R. H.

2018-02-01

This research aims to find out the evaluation program of the Industrial apprenticeship (Prakerin) in electrical engineering. This research includes on four variables of CIPP. (1). Context (a). programme planning (b). design. (2). Input (a). readiness of students (b). performance of vocational education teachers (c). Facilities and infrastructure, (3). process (a). performance students (b). performance mentors, (4). Product (a). readiness of student work. This research is a type of program evaluation research with Stake model approach. Data collection methods used are questionnaires with closed questions and frequently asked questions.

Colour and fat content as intrinsic cues for consumers attitudes towards meat product quality

NASA Astrophysics Data System (ADS)

Ristić, M.; Troeger, K.; Đinović-Stojanović, J.; Knežević, N.; Damnjanović, M.

2017-09-01

The aim of this study was to evaluate consumers’ attitudes towards sensory properties of chicken, royal and beef salami, meat products from Zlatiborac Meat Company. Sensory evaluation was performed by Serbian consumers (n=1018) in four retail stores (Delhaize) in Belgrade. Consumers were asked for their preference concerning the colour and fat of three selected salami and then completed questionnaire of socio-demographic information including eating behaviour. Selected smoked meat products were evaluated in the DLG Test Center Food, Germany. Consumers, at all education levels and in all age groups, evaluated colour as good and fat as sufficient with a significantly (p<0.05) higher percentage in comparison with other offered answers. All smoked products passed the DLG tests and received “DLG award winner” medals in Gold (73%) or Silver (27%).

Evaluation of indigenous microalgal isolate Chlorella sp. FC2 IITG as a cell factory for biodiesel production and scale up in outdoor conditions.

PubMed

Muthuraj, Muthusivaramapandian; Kumar, Vikram; Palabhanvi, Basavaraj; Das, Debasish

2014-03-01

The present study reports evaluation of an indigenous microalgal isolate Chlorella sp. FC2 IITG as a potential candidate for biodiesel production. Characterization of the strain was performed under photoautotrophic, heterotrophic, and mixotrophic cultivation conditions. Further, an open-pond cultivation of the strain under outdoor conditions was demonstrated to evaluate growth performance and lipid productivity under fluctuating environmental parameters and in the presence of potential contaminants. The key findings were: (1) the difference in cultivation conditions resulted in significant variation in the biomass productivity (73-114 mg l⁻¹ day⁻¹) and total lipid productivity (35.02-50.42 mg l⁻¹ day⁻¹) of the strain; (2) nitrate and phosphate starvation were found to be the triggers for lipid accumulation in the cell mass; (3) open-pond cultivation of the strain under outdoor conditions resulted in biomass productivity of 44 mg l⁻¹ day⁻¹ and total lipid productivity of 10.7 mg l⁻¹ day⁻¹; (4) a maximum detectable bacterial contamination of 7 % of the total number of cells was recorded in an open-pond system; and (5) fatty acid profiling revealed abundance of palmitic acid (C16:0), oleic acid (C18:1) and linoleic acid (C18:2), which are considered to be the key elements for suitable quality biodiesel.

Emergy Evaluation of a Production and Utilization Process of Irrigation Water in China

PubMed Central

Chen, Dan; Luo, Zhao-Hui; Chen, Jing; Kong, Jun; She, Dong-Li

2013-01-01

Sustainability evaluation of the process of water abstraction, distribution, and use for irrigation can contribute to the policy of decision making in irrigation development. Emergy theory and method are used to evaluate a pumping irrigation district in China. A corresponding framework for its emergy evaluation is proposed. Its emergy evaluation shows that water is the major component of inputs into the irrigation water production and utilization systems (24.7% and 47.9% of the total inputs, resp.) and that the transformities of irrigation water and rice as the systems' products (1.72E + 05 sej/J and 1.42E + 05 sej/J, resp.; sej/J = solar emjoules per joule) represent their different emergy efficiencies. The irrigated agriculture production subsystem has a higher sustainability than the irrigation water production subsystem and the integrated production system, according to several emergy indices: renewability ratio (%R), emergy yield ratio (EYR), emergy investment ratio (EIR), environmental load ratio (ELR), and environmental sustainability index (ESI). The results show that the performance of this irrigation district could be further improved by increasing the utilization efficiencies of the main inputs in both the production and utilization process of irrigation water. PMID:24082852

Emergy evaluation of a production and utilization process of irrigation water in China.

PubMed

Chen, Dan; Luo, Zhao-Hui; Chen, Jing; Kong, Jun; She, Dong-Li

2013-01-01

Sustainability evaluation of the process of water abstraction, distribution, and use for irrigation can contribute to the policy of decision making in irrigation development. Emergy theory and method are used to evaluate a pumping irrigation district in China. A corresponding framework for its emergy evaluation is proposed. Its emergy evaluation shows that water is the major component of inputs into the irrigation water production and utilization systems (24.7% and 47.9% of the total inputs, resp.) and that the transformities of irrigation water and rice as the systems' products (1.72E + 05 sej/J and 1.42E + 05 sej/J, resp.; sej/J = solar emjoules per joule) represent their different emergy efficiencies. The irrigated agriculture production subsystem has a higher sustainability than the irrigation water production subsystem and the integrated production system, according to several emergy indices: renewability ratio (%R), emergy yield ratio (EYR), emergy investment ratio (EIR), environmental load ratio (ELR), and environmental sustainability index (ESI). The results show that the performance of this irrigation district could be further improved by increasing the utilization efficiencies of the main inputs in both the production and utilization process of irrigation water.

48 CFR 42.302 - Contract administration functions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... delivery schedules. (32) Perform preaward surveys (see Subpart 9.1). (33) Advise and assist contractors... performance in the areas of design, development, and production. (41) Evaluate for adequacy and perform surveillance of contractor engineering efforts and management systems that relate to design, development...

Stochastic Modeling and Analysis of Multiple Nonlinear Accelerated Degradation Processes through Information Fusion.

PubMed

Sun, Fuqiang; Liu, Le; Li, Xiaoyang; Liao, Haitao

2016-08-06

Accelerated degradation testing (ADT) is an efficient technique for evaluating the lifetime of a highly reliable product whose underlying failure process may be traced by the degradation of the product's performance parameters with time. However, most research on ADT mainly focuses on a single performance parameter. In reality, the performance of a modern product is usually characterized by multiple parameters, and the degradation paths are usually nonlinear. To address such problems, this paper develops a new s-dependent nonlinear ADT model for products with multiple performance parameters using a general Wiener process and copulas. The general Wiener process models the nonlinear ADT data, and the dependency among different degradation measures is analyzed using the copula method. An engineering case study on a tuner's ADT data is conducted to demonstrate the effectiveness of the proposed method. The results illustrate that the proposed method is quite effective in estimating the lifetime of a product with s-dependent performance parameters.

PERFORMANCE DEMONSTRATIONS OF ALTERNATIVE SCREEN RECLAMATION PRODUCTS FOR SCREEN PRINTING

EPA Science Inventory

This project evaluated environmentally-preferable products for the screen reclamation process In screen printing during month-long demonstrations at 23 printing facilities nationwide. hrough the Environmental Protection Agency (EPA) Design for the Environment Printing Project, pr...

Performance evaluation of latest integrated multi-satellite retrievals for Global Precipitation Measurement (IMERG) over the northern highlands of Pakistan

NASA Astrophysics Data System (ADS)

Anjum, Muhammad Naveed; Ding, Yongjian; Shangguan, Donghui; Ahmad, Ijaz; Ijaz, Muhammad Wajid; Farid, Hafiz Umar; Yagoub, Yousif Elnour; Zaman, Muhammad; Adnan, Muhammad

2018-06-01

Recently, the Global Precipitation Measurement (GPM) mission has released the Integrated Multi-satellite Retrievals for GPM (IMERG) at a fine spatial (0.1° × 0.1°) and temporal (half hourly) resolutions. A comprehensive evaluation of this newly launched precipitation product is very important for satellite-based precipitation data users as well as for algorithm developers. The objective of this study was to provide a preliminary and timely performance evaluation of the IMERG product over the northern high lands of Pakistan. For comparison reference, the real-time and post real-time Tropical Rainfall Measuring Mission (TRMM) Multisatellite Precipitation Analysis (TMPA) products were also evaluated parallel to the IMERG. All of the selected precipitation products were evaluated at annual, monthly, seasonal and daily time scales using reference gauges data from April 2014 to December 2016. The results showed that: (1) the precipitation estimates from IMERG, 3B42V7 and 3B42RT products correlated well with the reference gauges observations at monthly time scale (CC = 0.93, 0.91, 0.88, respectively), whereas moderately at the daily time scale (CC = 0.67, 0.61, and 0.58, respectively); (2) Compared to the 3B42V7 and 3B42RT, the precipitation estimates from IMERG were more reliable in all seasons particularly in the winter season with lowest relative bias (2.61%) and highest CC (0.87); (3) IMERG showed a clear superiority over 3B42V7 and 3B42RT products in order to capture spatial distribution of precipitation over the northern Pakistan; (4) Relative to the 3B42V7 and 3B42RT, daily precipitation estimates from IMEREG showed lowest relative bias (9.20% vs. 21.40% and 26.10%, respectively) and RMSE (2.05 mm/day vs. 2.49 mm/day and 2.88 mm/day, respectively); and (5) Light precipitation events (0-1 mm/day) were usually overestimated by all said satellite-based precipitation products. In contrast moderate (1-20 mm/day) to heavy (>20 mm/day) precipitation events were underestimated by both TMPA products while IMERG was found capable to detect moderate to heavy precipitation events more precisely. Overall, the performance of IMERG was better than that of TMPA products. This preliminary evaluation of new generation of satellite-based precipitation estimates might be a useful feedback for sensor and algorithm developers as well as data users.

Insecticide resistance profile of Anopheles gambiae from a phase II field station in Cové, southern Benin: implications for the evaluation of novel vector control products.

PubMed

Ngufor, Corine; N'Guessan, Raphael; Fagbohoun, Josias; Subramaniam, Krishanthi; Odjo, Abibatou; Fongnikin, Augustin; Akogbeto, Martin; Weetman, David; Rowland, Mark

2015-11-18

Novel indoor residual spraying (IRS) and long-lasting insecticidal net (LLIN) products aimed at improving the control of pyrethroid-resistant malaria vectors have to be evaluated in Phase II semi-field experimental studies against highly pyrethroid-resistant mosquitoes. To better understand their performance it is necessary to fully characterize the species composition, resistance status and resistance mechanisms of the vector populations in the experimental hut sites. Bioassays were performed to assess phenotypic insecticide resistance in the malaria vector population at a newly constructed experimental hut site in Cové, a rice growing area in southern Benin, being used for WHOPES Phase II evaluation of newly developed LLIN and IRS products. The efficacy of standard WHOPES-approved pyrethroid LLIN and IRS products was also assessed in the experimental huts. Diagnostic genotyping techniques and microarray studies were performed to investigate the genetic basis of pyrethroid resistance in the Cové Anopheles gambiae population. The vector population at the Cové experimental hut site consisted of a mixture of Anopheles coluzzii and An. gambiae s.s. with the latter occurring at lower frequencies (23 %) and only in samples collected in the dry season. There was a high prevalence of resistance to pyrethroids and DDT (>90 % bioassay survival) with pyrethroid resistance intensity reaching 200-fold compared to the laboratory susceptible An. gambiae Kisumu strain. Standard WHOPES-approved pyrethroid IRS and LLIN products were ineffective in the experimental huts against this vector population (8-29 % mortality). The L1014F allele frequency was 89 %. CYP6P3, a cytochrome P450 validated as an efficient metabolizer of pyrethroids, was over-expressed. Characterizing pyrethroid resistance at Phase II field sites is crucial to the accurate interpretation of the performance of novel vector control products. The strong levels of pyrethroid resistance at the Cové experimental hut station make it a suitable site for Phase II experimental hut evaluations of novel vector control products, which aim for improved efficacy against pyrethroid-resistant malaria vectors to WHOPES standards. The resistance genes identified can be used as markers for further studies investigating the resistance management potential of novel mixture LLIN and IRS products tested at the site.

Measures to Evaluate the Effects of DBS on Speech Production

PubMed Central

Weismer, Gary; Yunusova, Yana; Bunton, Kate

2011-01-01

The purpose of this paper is to review and evaluate measures of speech production that could be used to document effects of Deep Brain Stimulation (DBS) on speech performance, especially in persons with Parkinson disease (PD). A small set of evaluative criteria for these measures is presented first, followed by consideration of several speech physiology and speech acoustic measures that have been studied frequently and reported on in the literature on normal speech production, and speech production affected by neuromotor disorders (dysarthria). Each measure is reviewed and evaluated against the evaluative criteria. Embedded within this review and evaluation is a presentation of new data relating speech motions to speech intelligibility measures in speakers with PD, amyotrophic lateral sclerosis (ALS), and control speakers (CS). These data are used to support the conclusion that at the present time the slope of second formant transitions (F2 slope), an acoustic measure, is well suited to make inferences to speech motion and to predict speech intelligibility. The use of other measures should not be ruled out, however, and we encourage further development of evaluative criteria for speech measures designed to probe the effects of DBS or any treatment with potential effects on speech production and communication skills. PMID:24932066

Pride and performance: evaluation challenges of a multimedia and information technologies project in remote Aboriginal Australia.

PubMed

Hunter, Ernest; Travers, Helen; Pelham, Steven; Gibson, Julie; Hermawan, Grace; Austin, Corey

2009-08-01

This paper explores an approach to an evaluation challenge: to demonstrate the impact of an initiative drawing on innovative use of information/multimedia technology and performance to address perceived social needs within a disadvantaged, remote Indigenous Australian community. The approach is described and preliminary data are presented supporting the importance of local production and participation.

The Joint Agency Commercial Imagery Evaluation (JACIE) Team: Overview and IKONOS Joint Characterization Approach

NASA Technical Reports Server (NTRS)

Zanoni, Vicki; Ryan, Robert; Pagnutti, Mary; Baldridge, Braxton; Roylance, Spencer; Snyder, Greg; Lee, George; Stanley, Tom

2002-01-01

An overview of the Joint Agency Commercial Imagery Evalation (JACIE) team is presented. JACIE, composed of the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA), and the U.S. Geological Survey (USGS), was formed to leverage government agencies' capabilities for the characterization of commercial remote sensing data. Each JACIE agency purchases, or plans to purchase, commercial imagery to support its research and applications. It is critical that the data be assessed for its accuracy and utility. Through JACIE, NASA, NIMA, and USGS jointly characterized image products from Space Imaging's IKONOS satellite. Each JACIE agency performed an aspect of the characterization based on its expertise. NASA and its university partners performed a system characterization focusing on radiometric calibration, geopositional accuracy, and spatial resolution assessment; NIMA performed image interpretability and feature extraction evaluations; and USGS assessed geopositional accuracy of several IKONOS products. The JACIE team purchased IKONOS imagery of several study sites to perform the assessments and presented results at an industry-government workshop. Future plans for JACIE include the characterization of DigitalGlobe's QuickBird-2 image products.

Measuring human performance on NASA's microgravity aircraft

NASA Technical Reports Server (NTRS)

Morris, Randy B.; Whitmore, Mihriban

1993-01-01

Measuring human performance in a microgravity environment will aid in identifying the design requirements, human capabilities, safety, and productivity of future astronauts. The preliminary understanding of the microgravity effects on human performance can be achieved through evaluations conducted onboard NASA's KC-135 aircraft. These evaluations can be performed in relation to hardware performance, human-hardware interface, and hardware integration. Measuring human performance in the KC-135 simulated environment will contribute to the efforts of optimizing the human-machine interfaces for future and existing space vehicles. However, there are limitations, such as limited number of qualified subjects, unexpected hardware problems, and miscellaneous plane movements which must be taken into consideration. Examples for these evaluations, the results, and their implications are discussed in the paper.

Performance of a portable chain flail delimber/debarker processing northern hardwoods.

Treesearch

Michael A. Thompson; John A. Sturos

1991-01-01

Evaluates the performance of a Peterson Pacific 4800 chain flail delimber/debarker processing pole-size hardwoods in northern Michigan. Describes the productivity, cost, and delimbing/debarking quality achieved by the flail.

Engineering development of selective agglomeration: Task 5, Bench- scale process testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-09-01

Under the overall objectives of DOE Contract ``Engineering Development of Selective Agglomeration,`` there were a number of specific objectives in the Task 5 program. The prime objectives of Task 5 are highlighted below: (1) Maximize process performance in pyritic sulfur rejection and BTU recovery, (2) Produce a low ash product, (3) Compare the performance of the heavy agglomerant process based on diesel and the light agglomerant process using heptane, (4) Define optimum processing conditions for engineering design, (5) Provide first-level evaluation of product handleability, and (6) Explore and investigate process options/ideas which may enhance process performance and/or product handleability.

Engineering development of selective agglomeration: Task 5, Bench- scale process testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-09-01

Under the overall objectives of DOE Contract Engineering Development of Selective Agglomeration,'' there were a number of specific objectives in the Task 5 program. The prime objectives of Task 5 are highlighted below: (1) Maximize process performance in pyritic sulfur rejection and BTU recovery, (2) Produce a low ash product, (3) Compare the performance of the heavy agglomerant process based on diesel and the light agglomerant process using heptane, (4) Define optimum processing conditions for engineering design, (5) Provide first-level evaluation of product handleability, and (6) Explore and investigate process options/ideas which may enhance process performance and/or product handleability.

Assessment of global precipitation measurement satellite products over Saudi Arabia

NASA Astrophysics Data System (ADS)

Mahmoud, Mohammed T.; Al-Zahrani, Muhammad A.; Sharif, Hatim O.

2018-04-01

Most hydrological analysis and modeling studies require reliable and accurate precipitation data for successful simulations. However, precipitation measurements should be more representative of the true precipitation distribution. Many approaches and techniques are used to collect precipitation data. Recently, hydrometeorological and climatological applications of satellite precipitation products have experienced a significant improvement with the emergence of the latest satellite products, namely, the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) products, which can be utilized to estimate and analyze precipitation data. This study focuses on the validation of the IMERG early, late and final run rainfall products using ground-based rain gauge observations throughout Saudi Arabia for the period from October 2015 to April 2016. The accuracy of each IMERG product is assessed using six statistical performance measures to conduct three main evaluations, namely, regional, event-based and station-based evaluations. The results indicate that the early run product performed well in the middle and eastern parts as well as some of the western parts of the country; meanwhile, the satellite estimates for the other parts fluctuated between an overestimation and an underestimation. The late run product showed an improved accuracy over the southern and western parts; however, over the northern and middle parts, it showed relatively high errors. The final run product revealed significantly improved precipitation estimations and successfully obtained higher accuracies over most parts of the country. This study provides an early assessment of the performance of the GPM satellite products over the Middle East. The study findings can be used as a beneficial reference for the future development of the IMERG algorithms.

Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

USGS Publications Warehouse

Kunz, Bethany K.; Little, Edward E.

2015-01-01

Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

Evaluation of bridge deck sealers.

DOT National Transportation Integrated Search

2014-06-01

This study focuses on the evaluation of bridge deck sealers commonly used on highway bridge decks and : their relative performance. After reviewing the most up-to-date research findings on chemical sealers used : by state DOTs, four sealer products t...

Evaluation of Chem-Crete : final report.

DOT National Transportation Integrated Search

1982-01-01

Two test sections, one on new construction and the other on a maintenance resurfacing project, were installed in the fall of 1980 to evaluate the proprietary product Chem-Crete. Laboratory tests and dynaflect and density measurements were performed o...

Calorific evaluation and energy potential of grape pomace

NASA Astrophysics Data System (ADS)

Burg, Patrik; Ludín, David; Rutkowski, Kazimierz; Krakowiak-Bal, Anna; Trávníček, Petr; Zemánek, Pavel; Turan, Jan; Višacki, Vladimir

2016-04-01

This article deals with energetic evaluation and potential of pomace - a waste product originating during production of grape wine. Calorimetric analysis of 19 grapevine varieties was performed in 2013 and 2014. The aim was to specify their combustible limit and the gross calorific value. The evaluations were performed on pristine pomace, pomace without seeds, and only on seeds themselves. The results obtained imply that pomace is an interesting energetic resource with a gross calorific value of 16.07-18.97 MJ kg-1. Lower calorific values were detected in pomace after seed separation ie 14.60-17.75 MJ kg-1; on the contrary, seeds alone had the highest calorific values of 19.78-21.13 MJ kg-1. It can be assumed from the results of energetic evaluation of pomace in Czech Republic conditions that, by purposeful and efficient usage of pomace, 6.4 GWh of electric energy and 28 GWh of thermal energy can be generated.

Performances

PubMed

Mousavi Jarahi, Alireza; Keihani, Porya; Vaziri, Esmaiel; Feizabadi, Mansoureh

2018-05-26

Today, research is seen as an investment to promote innovation and maintain sustainable social-economic development in all societies. The growth of scientific products and the expansion of knowledge in different scientific fields have entailed more attention to assessments and the impact evaluation of both outcome and process of researchers in all fields. In light of this need, policymakers in the medical field have paid more attention to evaluating the outcomes of research in terms of its impact on the society using many different indicators. In this short communication, the performance of scholarly published scientific products are discussed and the indicators that measure such impacts are evaluated and recommendation is given to APJCP’ editorial board on how to align its activities toward achieving better impact and scientometric measures for the journal. Creative Commons Attribution License

System Evaluation and Life-Cycle Cost Analysis of a Commercial-Scale High-Temperature Electrolysis Hydrogen Production Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

2012-11-01

Results of a system evaluation and lifecycle cost analysis are presented for a commercial-scale high-temperature electrolysis (HTE) central hydrogen production plant. The plant design relies on grid electricity to power the electrolysis process and system components, and industrial natural gas to provide process heat. The HYSYS process analysis software was used to evaluate the reference central plant design capable of producing 50,000 kg/day of hydrogen. The HYSYS software performs mass and energy balances across all components to allow optimization of the design using a detailed process flow sheet and realistic operating conditions specified by the analyst. The lifecycle cost analysismore » was performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes Microsoft Excel spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. The results of the lifecycle analyses indicate that for a 10% internal rate of return, a large central commercial-scale hydrogen production plant can produce 50,000 kg/day of hydrogen at an average cost of $2.68/kg. When the cost of carbon sequestration is taken into account, the average cost of hydrogen production increases by $0.40/kg to $3.08/kg.« less

Accuracy, reliability, and timing of visual evaluations of decay in fresh-cut lettuce

USDA-ARS?s Scientific Manuscript database

Visual assessments are used for evaluating the quality of food products, such as fresh-cut lettuce packaged in bags with modified atmosphere. We have compared the accuracy and the reliability of visual evaluations of decay on fresh-cut lettuce performed with experienced and inexperienced raters. In ...

Bringing a transgenic crop to market: where compositional analysis fits.

PubMed

Privalle, Laura S; Gillikin, Nancy; Wandelt, Christine

2013-09-04

In the process of developing a biotechnology product, thousands of genes and transformation events are evaluated to select the event that will be commercialized. The ideal event is identified on the basis of multiple characteristics including trait efficacy, the molecular characteristics of the insert, and agronomic performance. Once selected, the commercial event is subjected to a rigorous safety evaluation taking a multipronged approach including examination of the safety of the gene and gene product - the protein, plant performance, impact of cultivating the crop on the environment, agronomic performance, and equivalence of the crop/food to conventional crops/food - by compositional analysis. The compositional analysis is composed of a comparison of the nutrient and antinutrient composition of the crop containing the event, its parental line (variety), and other conventional lines (varieties). Different geographies have different requirements for the compositional analysis studies. Parameters that vary include the number of years (seasons) and locations (environments) to be evaluated, the appropriate comparator(s), analytes to be evaluated, and statistical analysis. Specific examples of compositional analysis results will be presented.

Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete.

PubMed

Kim, Sun-Woo; Jang, Seok-Joon; Kang, Dae-Hyun; Ahn, Kyung-Lim; Yun, Hyun-Do

2015-10-30

Conventional concrete production that uses ordinary Portland cement (OPC) as a binder seems unsustainable due to its high energy consumption, natural resource exhaustion and huge carbon dioxide (CO₂) emissions. To transform the conventional process of concrete production to a more sustainable process, the replacement of high energy-consumptive PC with new binders such as fly ash and alkali-activated slag (AAS) from available industrial by-products has been recognized as an alternative. This paper investigates the effect of curing conditions and steel fiber inclusion on the compressive and flexural performance of AAS concrete with a specified compressive strength of 40 MPa to evaluate the feasibility of AAS concrete as an alternative to normal concrete for CO₂ emission reduction in the concrete industry. Their performances are compared with reference concrete produced using OPC. The eco-efficiency of AAS use for concrete production was also evaluated by binder intensity and CO₂ intensity based on the test results and literature data. Test results show that it is possible to produce AAS concrete with compressive and flexural performances comparable to conventional concrete. Wet-curing and steel fiber inclusion improve the mechanical performance of AAS concrete. Also, the utilization of AAS as a sustainable binder can lead to significant CO₂ emissions reduction and resources and energy conservation in the concrete industry.

Conversion of bioprocess ethanol to industrial chemical products - Applications of process models for energy-economic assessments

NASA Technical Reports Server (NTRS)

Rohatgi, Naresh K.; Ingham, John D.

1992-01-01

An assessment approach for accurate evaluation of bioprocesses for large-scale production of industrial chemicals is presented. Detailed energy-economic assessments of a potential esterification process were performed, where ethanol vapor in the presence of water from a bioreactor is catalytically converted to ethyl acetate. Results show that such processes are likely to become more competitive as the cost of substrates decreases relative to petrolium costs. A commercial ASPEN process simulation provided a reasonably consistent comparison with energy economics calculated using JPL developed software. Detailed evaluations of the sensitivity of production cost to material costs and annual production rates are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia, E-mail: silvia.serranti@uniroma1.it

Highlights: • BioMethane Potential of grape marcs was investigated. • Grape marcs were characterized to realize a micro-scale energy recovery. • Comparative BMP batch-tests utilizing lab-scale reactors were performed. • Biogas valorization by grape marcs anaerobic digestion at small scale is evaluated. - Abstract: The BiochemicalMethanePotential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scalemore » winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year{sup −1} electrical and 8900 kW h year{sup −1} thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective.« less

Techno-economic evaluation of biodiesel production from waste cooking oil--a case study of Hong Kong.

PubMed

Karmee, Sanjib Kumar; Patria, Raffel Dharma; Lin, Carol Sze Ki

2015-02-18

Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO) can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR) sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices.

Solar Energy Systems for Lunar Oxygen Generation

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Heller, Richard S.; Wong, Wayne A.; Hepp, Aloysius F.

2010-01-01

An evaluation of several solar concentrator-based systems for producing oxygen from lunar regolith was performed. The systems utilize a solar concentrator mirror to provide thermal energy for the oxygen production process. Thermal energy to power a Stirling heat engine and photovoltaics are compared for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The initial oxygen production method utilized in the analysis is hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process (rate) affected the oxygen production rate. An evaluation of the power requirements for a carbothermal lunar regolith reduction reactor has also been conducted. The reactor had a total power requirement between 8,320 to 9,961 W when producing 1000 kg/year of oxygen. The solar concentrator used to provide the thermal power (over 82 percent of the total energy requirement) would have a diameter of less than 4 m.

Techno-Economic Evaluation of Biodiesel Production from Waste Cooking Oil—A Case Study of Hong Kong

PubMed Central

Karmee, Sanjib Kumar; Patria, Raffel Dharma; Lin, Carol Sze Ki

2015-01-01

Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO) can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR) sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices. PMID:25809602

Long-Term Historical Rainfall-Runoff Modeling Using High-Resolution Satellite-based Precipitation Products

NASA Astrophysics Data System (ADS)

Ashouri, H.; Nguyen, P.; Thorstensen, A. R.; Hsu, K. L.; Sorooshian, S.

2014-12-01

This study evaluates the performance of a newly developed long-term high-resolution satellite-based precipitation products, named Precipitation Estimation from Remotely Sensed Information using Artificial Neural Network - Climate Data Record (PERSIANN-CDR), in hydrological modeling. PERSIANN-CDR estimations are biased corrected using GPCP monthly climatology data. PERSIANN-CDR provides daily rainfall estimates at 0.25° x 0.25° grid boxes for 1983-2014 (delayed present). This newly released product makes it feasible to model the streamflow over the past 30 years. Three test basins from the Distributed Hydrologic Model Intercomparison Project - Phase 2 (DMIP 2) are chosen. Comparing with other satellite products, the Version 7 TRMM Multi-satellite Precipitation Analysis (TMPA) product is used. Stage IV radar data is used as a reference data for evaluating the PERSIANN-CDR and TMPA precipitation data. All products are scaled to 0.25° and daily spatiotemporal resolution. The study is performed in two phases. In the first phase, the 2003-2011 period where all the products are available is chosen. Precipitation evaluation results, presented on Taylor Diagrams, show that TMPA and PERSIANN-CDR have close performances. The National Weather Service (NWS) Office of Hydrologic Development (OHD) Hydrology Laboratory-Research Distributed Hydrologic Model (HL-RDHM) is then forced with the PERSIANN-CDR and the TMPA precipitation products, as well as the stage IV radar data. USGS Streamflow observations at the outlet of the basins are used as the reference streamflow data. The results show that in general, in all the three DMIP 2 basins the simulated hydrographs forced with PERSIANN-CDR and TMPA show good agreement, as the statistical measures such as root mean square error, bias, and correlation coefficient are close. In addition, with respect to the streamflow peaks, PERSIANN-CDR shows better performance than Stage IV radar data in capturing the extreme streamflow magnitudes. Based on the results from the first phase of the study and given the fact that PERSIANN-CDR covers the 1983-2014, in the second phase of the study we model the streamflow for the period of 1983-2014. The results will be presented in the meeting.

PILOT-SCALE INCINERATION TEST BURN OF TCDD-CONTAMINATED TRICHLOROPHENOL PRODUCTION WASTE

EPA Science Inventory

A series of three tests directed at evaluating the incinerability of the toluene stillbottoms waste from trichlorophenol production previously generated by the Vertac Chemical Company were performed in the Combustion Research Facility (CRF) rotary kiln incineration system. This w...

Greenhouse Evaluation of Air-Assist Delivery Parameters for Mature Poinsettias

USDA-ARS?s Scientific Manuscript database

Understanding the performance characteristics of application equipment is important for helping make the most efficacious applications. While handguns making high volume applications are common in greenhouse production, it is difficult to achieve uniform distribution of product in a timely manner. ...

Identifying and Evaluating Options for Improving Sediment Management and Fish Passage at Hydropower Dams in the Lower Mekong River Basin

NASA Astrophysics Data System (ADS)

Wild, T. B.; Reed, P. M.; Loucks, D. P.

2015-12-01

The Mekong River basin in Southeast Asia is undergoing intensive and pervasive hydropower development to satisfy demand for increased energy and income to support its growing population of 60 million people. Just 20 years ago this river flowed freely. Today some 30 large dams exist in the basin, and over 100 more are being planned for construction. These dams will alter the river's natural water, sediment and nutrient flows, thereby impacting river morphology and ecosystems, and will fragment fish migration pathways. In doing so, they will degrade one of the world's most valuable and productive freshwater fish habitats. For those dams that have not yet been constructed, there still exist opportunities to modify their siting, design and operation (SDO) to potentially achieve a more balanced set of tradeoffs among hydropower production, sediment/nutrient passage and fish passage. We introduce examples of such alternative SDO opportunities for Sambor Dam in Cambodia, planned to be constructed on the main stem of the Mekong River. To evaluate the performance of such alternatives, we developed a Python-based simulation tool called PySedSim. PySedSim is a daily time step mass balance model that identifies the relative tradeoffs among hydropower production, and flow and sediment regime alteration, associated with reservoir sediment management techniques such as flushing, sluicing, bypassing, density current venting and dredging. To date, there has been a very limited acknowledgement or evaluation of the significant uncertainties that impact the evaluation of SDO alternatives. This research is formalizing a model diagnostic assessment of the key assumptions and parametric uncertainties that strongly influence PySedSim SDO evaluations. Using stochastic hydrology and sediment load data, our diagnostic assessment evaluates and compares several Sambor Dam alternatives using several performance measures related to energy production, sediment trapping and regime alteration, and fish passage. We show that performance of the alternatives can be highly variable, and conduct a simultaneous multi-parameter factor screening sensitivity analysis to identify the subset of PySedSim model parameters that contribute most significantly to performance uncertainties in attempts to identify the more robust options.

Results of data base management system parameterized performance testing related to GSFC scientific applications

NASA Technical Reports Server (NTRS)

Carchedi, C. H.; Gough, T. L.; Huston, H. A.

1983-01-01

The results of a variety of tests designed to demonstrate and evaluate the performance of several commercially available data base management system (DBMS) products compatible with the Digital Equipment Corporation VAX 11/780 computer system are summarized. The tests were performed on the INGRES, ORACLE, and SEED DBMS products employing applications that were similar to scientific applications under development by NASA. The objectives of this testing included determining the strength and weaknesses of the candidate systems, performance trade-offs of various design alternatives and the impact of some installation and environmental (computer related) influences.

Cochlear implantation in children with auditory neuropathy spectrum disorder: A multicenter study on auditory performance and speech production outcomes.

PubMed

Daneshi, Ahmad; Mirsalehi, Marjan; Hashemi, Seyed Basir; Ajalloueyan, Mohammad; Rajati, Mohsen; Ghasemi, Mohammad Mahdi; Emamdjomeh, Hesamaldin; Asghari, Alimohamad; Mohammadi, Shabahang; Mohseni, Mohammad; Mohebbi, Saleh; Farhadi, Mohammad

2018-05-01

To evaluate the auditory performance and speech production outcome in children with auditory neuropathy spectrum disorder (ANSD). The effect of age on the outcomes of the surgery at the time of implantation was also evaluated. Cochlear implantation was performed in 136 children with bilateral severe-to- profound hearing loss due to ANSD, at four tertiary academic centers. The patients were divided into two groups based on the age at the time of implantation; Group I: Children ≤24 months, and Group II: subjects >24 months. The categories of auditory performance (CAP) and speech intelligibility rating (SIR) scores were evaluated after the first and second years of implantation. The differences between the CAP and SIR scores in the two groups were assessed. The median CAP scores improved significantly after the cochlear implantation in all the patients (p value < 0.001). The improvement in the CAP scores during the first year in Group II was greater than Group I (p value: 0.007), but the improvement in CAP scores tended to be significantly higher in patients who were implanted at ≤24 months (p value < 0.001). There was no significant difference between two groups in SIR scores at first-year and second-year follow-ups. The evaluation of the SIR improvement revealed significantly higher values for Group I during the second-year follow-up (p value: 0.003). The auditory performance and speech production skills of the children with ANSD improved significantly after cochlear implantation, and this improvement was affected by age at the time of implantation. Copyright © 2018 Elsevier B.V. All rights reserved.

Thermal Performance Evaluation of Walls with Gas Filled Panel Insulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shrestha, Som S.; Desjarlais, Andre Omer; Atchley, Jerald Allen

Gas filled insulation panels (GFP) are very light weight and compact (when uninflated) advanced insulation products. GFPs consist of multiple layers of thin, low emittance (low-e) metalized aluminum. When expanded, the internal, low-e aluminum layers form a honeycomb structure. These baffled polymer chambers are enveloped by a sealed barrier and filled with either air or a low-conductivity gas. The sealed exterior aluminum foil barrier films provide thermal resistance, flammability protection, and properties to contain air or a low conductivity inert gas. This product was initially developed with a grant from the U.S. Department of Energy. The unexpanded product is nearlymore » flat for easy storage and transport. Therefore, transportation volume and weight of the GFP to fill unit volume of wall cavity is much smaller compared to that of other conventional insulation products. This feature makes this product appealing to use at Army Contingency Basing, when transportation cost is significant compared to the cost of materials. The objective of this study is to evaluate thermal performance of walls, similar to those used at typical Barracks Hut (B-Hut) hard shelters, when GFPs are used in the wall cavities. Oak Ridge National Laboratory (ORNL) tested performance of the wall in the rotatable guarded hotbox (RGHB) according to the ASTM C 1363 standard test method.« less

Management of Varicose Veins and Chronic Venous Insufficiency in a Comparative Registry with Nine Venoactive Products in Comparison with Stockings.

PubMed

Belcaro, G; Dugall, M; Luzzi, R; Corsi, M; Ledda, A; Ricci, A; Pellegrini, L; Cesarone, M R; Hosoi, M; Errichi, B M; Cornelli, U; Cotellese, R; Agus, G; Feragalli, B

2017-09-01

The aim of this registry study was to compare products used to control symptoms of CVI. Endpoints of the study were microcirculation, effects on volume changes, and symptoms (analogue scale). Pycnogenol, venoruton, troxerutin, the complex diosmin-hesperidin, Antistax, Mirtoselect (bilberry), escin, and the combination Venoruton-Pycnogenol (VE-PY) were compared with compressions. No safety or tolerability problems were observed. At inclusion, measurements in the groups were comparable: 1,051 patients completed the registry. Best performers : Venoruton, Pycnogenol, and the combination VE-PY produced the best effects on skin flux. These products and the combination VE-PY better improved PO 2 and PCO 2 . The edema score was decreased more effectively with the combination and with Pycnogenol. Venoruton; Antistax also had good results. Considering volumetry, the best performers were the combination PY-VE and the two single products Venoruton and Pycnogenol. Antistax results for edema were also good. The best improvement in symptoms score were obtained with Pycnogenol and compression. A larger decrease in oxidative stress was observed with Pycnogenol, Venoruton, and with the VE-PY combination. Good effects of Antistax were also observed. Parestesias were lower with Pycnogenol and with Antistax. Considering the need for interventions, the best performers were Pycnogenol, VE-PY, and compression. The efficacy of Pycnogenol and the combination are competitive with stockings that do not have the same tolerability in warmer climates. A larger and more prolonged evaluation is suggested to evaluate cost-efficacy (and non-interference with drugs) of these products in the management of CVI. The registry is in progress; other products are in evaluation.

Operational CryoSat Product Quality Assessment

NASA Astrophysics Data System (ADS)

Mannan, Rubinder; Webb, Erica; Hall, Amanda; Bouzinac, Catherine

2013-12-01

The performance and quality of the CryoSat data products are routinely assessed by the Instrument Data quality Evaluation and Analysis Service (IDEAS). This information is then conveyed to the scientific and user community in order to allow them to utilise CryoSat data with confidence. This paper presents details of the Quality Control (QC) activities performed for CryoSat products under the IDEAS contract. Details of the different QC procedures and tools deployed by IDEAS to assess the quality of operational data are presented. The latest updates to the Instrument Processing Facility (IPF) for the Fast Delivery Marine (FDM) products and the future update to Baseline-C are discussed.

Use of partial AUC (PAUC) to evaluate bioequivalence--a case study with complex absorption: methylphenidate.

PubMed

Fourie Zirkelbach, Jeanne; Jackson, Andre J; Wang, Yaning; Schuirmann, Donald J

2013-01-01

Methylphenidate modified-release products produce early and late peak concentrations critical for treatment of morning and afternoon symptoms of attention deficit hyperactivity disorder (ADHD). Standard bioequivalence (BE) criteria cannot be applied to these products. The performance of partial area under the drug concentration-time curve (PAUC), Cmax and AUCINF to assess BE were independently evaluated for two products. A two-stage analysis was performed on plasma data for two methylphenidate modified-release products (Product 1 and 2). Simulations using the fitted parameters determined how changes in fast absorption rate constant (K0Fast) and fraction available (F1) affected curve shape and BE determination using Cmax, AUCINF and PAUC. The sensitivity of the mean PAUC(test)/PAUC(reference) ratios to changes in K0Fast(test) are product dependent. Product 1 mean PAUC(test)/PAUC(reference) ratios for PAUC0-4h are more responsive to both decreases and increases in K0Fast(test) than Product 2. Product 2 showed a greater response in the mean PAUC(test)/PAUC(reference) ratio for PAUC0-4h when the K0Fast(test) is decreased and less response as the value is increased. PAUC estimated curve shape is sensitive to changes in absorption and are product specific, and may require a new PAUC metric for each drug. A non-product specific metric to assess curve shape is warranted.

Cleaning and disinfection in home care: A comparison of 2 commercial products with potentially different consequences for respiratory health.

PubMed

Goodyear, Nancy; Markkanen, Pia; Beato-Melendez, Christian; Mohamed, Hagir; Gore, Rebecca; Galligan, Catherine; Sama, Susan; Quinn, Margaret

2018-04-01

Home care aides perform personal care and homemaking services in client homes, including cleaning and disinfection (C&D). Although C&D are performed to remove soil and dust, they are increasingly performed for infection prevention. Many C&D products contain respiratory irritants. The objective of this study was to evaluate 2 commercial products for C&D effectiveness on common household surfaces in seniors' homes. Two C&D visits were conducted in 46 seniors' homes. One visit applied a bleach-containing cleaning product and the other applied an environmentally preferable product. Before and after C&D, the study team performed organic soil bioluminometer measurements on surfaces and collected cotton swab and wipe samples for total bacteria count, Staphylococcus aureus, and Clostridium difficile identification. Both products removed microorganisms from tested surfaces. S aureus was found in 7 households, 1 strain of which was methicillin-resistant. Both products removed S aureus from all surfaces. Bleach-containing products removed somewhat more soil than environmentally preferable products, although results were statistically significant for only 1 surface. The study showed similar, not identical, C&D performance for 2 cleaning products with potentially different consequences for respiratory health. Additional research is needed to develop robust recommendations for safe, effective C&D in home care. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Laboratory and clinical evaluation of on-site urine drug testing.

PubMed

Beck, Olof; Carlsson, Sten; Tusic, Marinela; Olsson, Robert; Franzen, Lisa; Hulten, Peter

2014-11-01

Products for on-site urine drug testing offer the possibility to perform screening for drugs of abuse directly at the point-of-care. This is a well-established routine in emergency and dependency clinics but further evaluation of performance is needed due to inherent limitations with the available products. Urine drug testing by an on-site product was compared with routine laboratory methods. First, on-site testing was performed at the laboratory in addition to the routine method. Second, the on-site testing was performed at a dependency clinic and urine samples were subsequently sent to the laboratory for additional analytical investigation. The on-site testing products did not perform with assigned cut-off levels. The subjective reading between the presence of a spot (i.e. negative test result) being present or no spot (positive result) was difficult in 3.2% of the cases, and occurred for all parameters. The tests performed more accurately in drug negative samples (specificity 96%) but less accurately for detecting positives (sensitivity 79%). Of all incorrect results by the on-site test the proportion of false negatives was 42%. The overall agreement between on-site and laboratory testing was 95% in the laboratory study and 98% in the clinical study. Although a high degree of agreement was observed between on-site and routine laboratory urine drug testing, the performance of on-site testing was not acceptable due to significant number of false negative results. The limited sensitivity of on-site testing compared to laboratory testing reduces the applicability of these tests.

The impact of front-of-pack nutrition labels on consumer product evaluation and choice: an experimental study.

PubMed

Hamlin, Robert P; McNeill, Lisa S; Moore, Vanessa

2015-08-01

The present research was an experimental test that aimed to quantify the impact of two dominant front-of-pack (FOP) nutritional label formats on consumer evaluations of food products that carried them. The two FOP label types tested were the traffic light label and the Percentage Daily Intake. A 4×5 partially replicated Latin square design was used that allowed the impact of the FOP labels to be isolated from the effects of the product and the consumers who were performing the evaluations. The experiment was conducted on campus at the University of Otago, New Zealand. The participants were 250 university students selected at random who met qualifying criteria of independent living and regular purchase of the products used in the research. They were not aware of the purpose of the research. The presence of FOP labels led to significant and positive changes in consumer purchase intentions towards the products that carried them. These changes were not affected by the nature of FOP labels used, their size or the product nutritional status (good/bad) that they were reporting. The result is consistent with the participants paying attention to the FOP label and then using it as an adimensional cue indicating product desirability. As such, it represents a complete functional failure of both of these FOP label types in this specific instance. This result supports calls for further research on the performance of these FOP labels before any move to compulsory deployment is made.

An Examination of the (Un)Intended Consequences of Performance Funding in Higher Education

ERIC Educational Resources Information Center

Umbricht, Mark R.; Fernandez, Frank; Ortagus, Justin C.

2017-01-01

Previous studies have shown that state performance funding policies do not increase baccalaureate degree production, but higher education scholarship lacks a rigorous, quantitative analysis of the unintended consequences of performance funding. In this article, we use difference-in-differences estimation with fixed effects to evaluate performance…

USDA - Forest Service Termiticide Report for 2013

Treesearch

Thomas Shelton; Donald Fye; Michael Ulyshen

2014-01-01

The USDA-FS Termiticde Testing Program has been evaluating termiticide performance since the 1930s. The program has provided baseline performance data for all termiticdes currently registered in the U.S. Through this report and individual product reports, registered termiticide performance data has been provided to pesticide manufacturers, regulators, the pest...

Draft Plan for Characterizing Commercial Data Products in Support of Earth Science Research

NASA Technical Reports Server (NTRS)

Ryan, Robert E.; Terrie, Greg; Berglund, Judith

2006-01-01

This presentation introduces a draft plan for characterizing commercial data products for Earth science research. The general approach to the commercial product verification and validation includes focused selection of a readily available commercial remote sensing products that support Earth science research. Ongoing product verification and characterization will question whether the product meets specifications and will examine its fundamental properties, potential and limitations. Validation will encourage product evaluation for specific science research and applications. Specific commercial products included in the characterization plan include high-spatial-resolution multispectral (HSMS) imagery and LIDAR data products. Future efforts in this process will include briefing NASA headquarters and modifying plans based on feedback, increased engagement with the science community and refinement of details, coordination with commercial vendors and The Joint Agency Commercial Imagery Evaluation (JACIE) for HSMS satellite acquisitions, acquiring waveform LIDAR data and performing verification and validation.

Training evaluation final report

NASA Technical Reports Server (NTRS)

Sepulveda, Jose A.

1992-01-01

In the area of management training, 'evaluation' refers both to the specific evaluation instrument used to determine whether a training effort was considered effective, and to the procedures followed to evaluate specific training requests. This report recommends to evaluate new training requests in the same way new procurement or new projects are evaluated. This includes examining training requests from the perspective of KSC goals and objectives, and determining expected ROI of proposed training program (does training result in improved productivity, through savings of time, improved outputs, and/or personnel reduction?). To determine whether a specific training course is effective, a statement of what constitutes 'good performance' is required. The user (NOT the Training Branch) must define what is 'required level of performance'. This 'model' will be the basis for the design and development of an objective, performance-based, training evaluation instrument.

Evaluation of Process Performance for Sustainable Hard Machining

NASA Astrophysics Data System (ADS)

Rotella, Giovanna; Umbrello, Domenico; , Oscar W. Dillon, Jr.; Jawahir, I. S.

This paper aims to evaluate the sustainability performance of machining operation of through-hardening steel, AISI 52100, taking into account the impact of the material removal process in its various aspects. Experiments were performed for dry and cryogenic cutting conditions using chamfered cubic boron nitride (CBN) tool inserts at varying cutting conditions (cutting speed and feed rate). Cutting forces, mechanical power, tool wear, white layer thickness, surface roughness and residual stresses were investigated in order to evaluate the effects of extreme in-process cooling on the machined surface. The results indicate that cryogenic cooling has the potential to be used for surface integrity enhancement for improved product life and more sustainable functional performance.

Evaluation of the performance of hydrological variables derived from GLDAS-2 and MERRA-2 in Mexico

NASA Astrophysics Data System (ADS)

Real-Rangel, R. A.; Pedrozo-Acuña, A.; Breña-Naranjo, J. A.

2017-12-01

Hydrological studies have found in data assimilation systems and global reanalysis of land surface variables (e.g soil moisture, streamflow) a wide range of applications, from drought monitoring to water balance and hydro-climatology variability assessment. Indeed, these hydrological data sources have led to an improvement in developing and testing monitoring and prediction systems in poorly gauged regions of the world. This work tests the accuracy and error of land surface variables (precipitation, soil moisture, runoff and temperature) derived from the data assimilation reanalysis products GLDAS-2 and MERRA-2. Validate the performance of these data platforms must be thoroughly evaluated in order to consider the error of hydrological variables (i.e., precipitation, soil moisture, runoff and temperature) derived from the reanalysis products. For such purpose, a quantitative assessment was performed at 2,892 climatological stations, 42 stream gauges and 44 soil moisture probes located in Mexico and across different climate regimes (hyper-arid to tropical humid). Results show comparisons between these gridded products against ground-based observational stations for 1979-2014. The results of this analysis display a spatial distribution of errors and accuracy over Mexico discussing differences between climates, enabling the informed use of these products.

Low Carbon Technology Options for the Natural Gas Electricity Production

EPA Science Inventory

The ultimate goal of this task is to perform environmental and economic analysis of natural gas based power production technologies (different routes) to investigate and evaluate strategies for reducing emissions from the power sector. It is a broad research area. Initially, the...

MATHEMATICAL MODEL FOR METHANE PRODUCTION FROM LANDFILL BIOREACTOR - A DISCUSSION PAPER HTTP://OIPS.AIP.ORG/EEO/

EPA Science Inventory

This discussion explains the experimental results of a landfill bioreactor (LFBR) from a microbiological perspective and provides a feasible strategy to evaluate methane production performance, since suitable models are complicated and not sufficiently reliable for anaerobic-syst...

21 CFR 26.35 - Length and purpose of transition period.

Code of Federal Regulations, 2010 CFR

2010-04-01

... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS, AND CERTAIN MEDICAL DEVICE PRODUCT EVALUATION REPORTS: UNITED STATES AND THE EUROPEAN... bodies (CAB's) of the other party with respect to the ability to perform quality system and product...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT--BAGHOUSE FILTRATION PRODUCTS, W.L. GORE ASSOC., INC.

EPA Science Inventory

The U.S. Environmental Protection Agency Air Pollution Control Technology (APCT) Verification Center evaluates the performance of baghouse filtration products used primarily to control PM2.5 emissions. This verification statement summarizes the test results for W.L. Gore & Assoc....

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - TETRATEC PTFE TECHNOLOGIES TETRATEX 8005

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - INSPEC FIBRES 5512BRF FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - MENARDI-CRISWELL 50-504 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

Genomic evaluation of rectal temperature in Holstein cattle

USDA-ARS?s Scientific Manuscript database

Heat stress negatively impacts the production, fertility, and health of dairy cattle. Rectal temperature (RT) has unfavorable genetic correlations with production, longevity, economic merit, and somatic cell score in Holstein cows. The objectives of the current study were to perform a genome-wide as...

Evaluation of E-Krete and resurf II IV for concrete spall repair.

DOT National Transportation Integrated Search

2000-09-01

This report will focus on two products, E-Krete and RESURF II IV, for their performance in rehabilitating spalled cracks on : CRCP (Continuously Reinforced Concrete Pavement). E-Krete is a product manufactured by Polycon, Inc. and , prior to this : e...

Navigating sticky areas in transdermal product development.

PubMed

Strasinger, Caroline; Raney, Sam G; Tran, Doanh C; Ghosh, Priyanka; Newman, Bryan; Bashaw, Edward D; Ghosh, Tapash; Shukla, Chinmay G

2016-07-10

The benefits of transdermal delivery over the oral route to combat such issues of low bioavailability and limited controlled release opportunities are well known and have been previously discussed by many in the field (Prausnitz et al. (2004) [1]; Hadgraft and Lane (2006) [2]). However, significant challenges faced by developers as a product moves from the purely theoretical to commercial production have hampered full capitalization of the dosage forms vast benefits. While different technical aspects of transdermal system development have been discussed at various industry meetings and scientific workshops, uncertainties have persisted regarding the pharmaceutical industry's conventionally accepted approach for the development and manufacturing of transdermal systems. This review provides an overview of the challenges frequently faced and the industry's best practices for assuring the quality and performance of transdermal delivery systems and topical patches (collectively, TDS). The topics discussed are broadly divided into the evaluation of product quality and the evaluation of product performance; with the overall goal of the discussion to improve, advance and accelerate commercial development in the area of this complex controlled release dosage form. Published by Elsevier B.V.

Catalytic cracking of Mayan gas oil and selected hydrotreated products: Topical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wells, J.W.; Zagula, E.J.; Brinkman, D.W.

1988-01-01

The catalytic cracking of a Mayan vacuum gas oil and the products from mild, moderate, and severe hydrotreating of this gas oil was evaluated over a low-metal equilibrium catalyst in a microconfined bed unit (MCBU). Results obtained with the Mayan feedstocks are compared with those of an earlier study conducted with similar feedstocks obtained from a Wilmington (CA) crude oil. Two levels of catalytic cracking severity were used in the evaluation. Performance and product analysis showed that hydrotreating improves the yields obtained from catalytic cracking and the quality of the resultant products. In contrast to results obtained with the Wilmingtonmore » feedstocks, conversion and gasoline yield do not improve with severity of the hydrotreating of the Mayan vacuum gas oils. The insensitivity of the cracking performance to hydrotreating severity may reflect the more facile removal of polar compounds (heteroatom compounds) on hydrotreating of the Mayan gas oil in comparison to the Wilmington. Sulfur and nitrogen contents of the liquid products (gasoline, light cycle oil, heavy cycle oil) decreased as the severity of the feed hydrotreating increased. 7 refs., 12 figs., 15 tabs.« less

Regenerative Life Support Systems (RLSS) test bed performance - Characterization of plant performance in a controlled atmosphere

NASA Technical Reports Server (NTRS)

Edeen, Marybeth; Henninger, Donald

1991-01-01

By growing higher plants for food, lunar and Martian manned habitats will not only reduce resupply requirements but obtain CO2 removal and both oxygen-production and water-reclamation requirements. Plants have been grown in the RLSS at NASA-Johnson in order to quantitatively evaluate plant CO2 accumulation, O2 generation, evapotranspiration, trace-contaminant generation, and biomass productivity. Attention is presently given to test conditions and anomalies in these RLSS trials; areas where performance must be improved have been identified.

Function evaluation of asphalt mixture with industrially produced BOF slag aggregate.

PubMed

Zhao, Meiling; Wu, Shaopeng; Chen, Zongwu; Li, Chao

2016-07-04

Laboratory research suggested that basic oxygen furnace (BOF) slag-based asphalt mixture was a functional material. However, the BOF slag aggregate's quality was difficult to control when it was heavily used in entity engineering. The primary objective of this research was to evaluate the functional performances of asphalt mixture containing BOF slag coarse aggregate (BSCA), which was from an industrialized production line. Limestone mixture was a control group. The Marshall method was first adopted to design asphalt mixtures. The performances of limestone asphalt mixture and BOF slag asphalt mixture including fatigue failure resistance and moisture stability were then evaluated and compared. Results showed that the asphalt mixture containing BSCA possessed better durability, which meant the quality of BSCA from industrialized production lines was well controlled and this BSCA can be heavily used in entity engineering.

The Impact of Granule Density on Tabletting and Pharmaceutical Product Performance.

PubMed

van den Ban, Sander; Goodwin, Daniel J

2017-05-01

The impact of granule densification in high-shear wet granulation on tabletting and product performance was investigated, at pharmaceutical production scale. Product performance criteria need to be balanced with the need to deliver manufacturability criteria to assure robust industrial scale tablet manufacturing processes. A Quality by Design approach was used to determine in-process control specifications for tabletting, propose a design space for disintegration and dissolution, and to understand the permitted operating limits and required controls for an industrial tabletting process. Granules of varying density (filling density) were made by varying water amount added, spray rate, and wet massing time in a design of experiment (DoE) approach. Granules were compressed into tablets to a range of thicknesses to obtain tablets of varying breaking force. Disintegration and dissolution performance was evaluated for the tablets made. The impact of granule filling density on tabletting was rationalised with compressibility, tabletability and compactibility. Tabletting and product performance criteria provided competing requirements for porosity. An increase in granule filling density impacted tabletability and compactability and limited the ability to achieve tablets of adequate mechanical strength. An increase in tablet solid fraction (decreased porosity) impacted disintegration and dissolution. An attribute-based design space for disintegration and dissolution was specified to achieve both product performance and manufacturability. The method of granulation and resulting granule filling density is a key design consideration to achieve both product performance and manufacturability required for modern industrial scale pharmaceutical product manufacture and distribution.

A comparative evaluation of different types of microbial electrolysis desalination cells for malic acid production.

PubMed

Liu, Guangli; Zhou, Ying; Luo, Haiping; Cheng, Xing; Zhang, Renduo; Teng, Wenkai

2015-12-01

The aim of this study was to investigate different microbial electrolysis desalination cells for malic acid production. The systems included microbial electrolysis desalination and chemical-production cell (MEDCC), microbial electrolysis desalination cell (MEDC) with bipolar membrane and anion exchange membrane (BP-A MEDC), MEDC with bipolar membrane and cation exchange membrane (BP-C MEDC), and modified microbial desalination cell (M-MDC). The microbial electrolysis desalination cells performed differently in terms of malic acid production and energy consumption. The MEDCC performed best with the highest malic acid production rate (18.4 ± 0.6 mmol/Lh) and the lowest energy consumption (0.35 ± 0.14 kWh/kg). The best performance of MEDCC was attributable to the neutral pH condition in the anode chamber, the lowest internal resistance, and the highest Geobacter percentage of the anode biofilm population among all the reactors. Copyright © 2015 Elsevier Ltd. All rights reserved.

Ergonomic evaluation of processes and products in the manufacture of upholstery.

PubMed

Fialho, Patrícia Bhering; de Souza, Amaury Paulo; Minette, Luciano José; Silva, José de Castro; de Oliveira, Luciana Aparecida

2012-01-01

This study aimed to perform an ergonomic evaluation of industrial processes and products - upholstered sofas - produced in the furniture cluster of Ubá-MG. The used material was collected from two sofas upholstered industries associated with the union of the furniture industries of Ubá region, located in Minas Gerais estate, Brazil. As for the product were evaluated dimensionally 29 upholstered sofas, with 12 being produced by industry "A" and 17 being produced by industry "B". As for the process, were evaluated: the socioeconomic profile of the worker and environmental factors of lighting and noise. The main results of this study showed that the upholstered sofas produced by industries, in general, fulfilled to the recommendations set out in the work in relation to the backrest height and useful seat depth. All the sofas, however, proved to be inadequate in relation to the seat height to the floor and the dimensions of the armrests Regarding environmental aspects, it was observed that in both industries, the activities in most jobs are performed under adverse conditions to the health and safety of workers and nonconformity with the limits set by Brazilian regulatory standard used in this work.

Techniques for control of long-term reliability of complex integrated circuits. I - Reliability assurance by test vehicle qualification.

NASA Technical Reports Server (NTRS)

Van Vonno, N. W.

1972-01-01

Development of an alternate approach to the conventional methods of reliability assurance for large-scale integrated circuits. The product treated is a large-scale T squared L array designed for space applications. The concept used is that of qualification of product by evaluation of the basic processing used in fabricating the product, providing an insight into its potential reliability. Test vehicles are described which enable evaluation of device characteristics, surface condition, and various parameters of the two-level metallization system used. Evaluation of these test vehicles is performed on a lot qualification basis, with the lot consisting of one wafer. Assembled test vehicles are evaluated by high temperature stress at 300 C for short time durations. Stressing at these temperatures provides a rapid method of evaluation and permits a go/no go decision to be made on the wafer lot in a timely fashion.

Stochastic Modeling and Analysis of Multiple Nonlinear Accelerated Degradation Processes through Information Fusion

PubMed Central

Sun, Fuqiang; Liu, Le; Li, Xiaoyang; Liao, Haitao

2016-01-01

Accelerated degradation testing (ADT) is an efficient technique for evaluating the lifetime of a highly reliable product whose underlying failure process may be traced by the degradation of the product’s performance parameters with time. However, most research on ADT mainly focuses on a single performance parameter. In reality, the performance of a modern product is usually characterized by multiple parameters, and the degradation paths are usually nonlinear. To address such problems, this paper develops a new s-dependent nonlinear ADT model for products with multiple performance parameters using a general Wiener process and copulas. The general Wiener process models the nonlinear ADT data, and the dependency among different degradation measures is analyzed using the copula method. An engineering case study on a tuner’s ADT data is conducted to demonstrate the effectiveness of the proposed method. The results illustrate that the proposed method is quite effective in estimating the lifetime of a product with s-dependent performance parameters. PMID:27509499

Quality Attribute Techniques Framework

NASA Astrophysics Data System (ADS)

Chiam, Yin Kia; Zhu, Liming; Staples, Mark

The quality of software is achieved during its development. Development teams use various techniques to investigate, evaluate and control potential quality problems in their systems. These “Quality Attribute Techniques” target specific product qualities such as safety or security. This paper proposes a framework to capture important characteristics of these techniques. The framework is intended to support process tailoring, by facilitating the selection of techniques for inclusion into process models that target specific product qualities. We use risk management as a theory to accommodate techniques for many product qualities and lifecycle phases. Safety techniques have motivated the framework, and safety and performance techniques have been used to evaluate the framework. The evaluation demonstrates the ability of quality risk management to cover the development lifecycle and to accommodate two different product qualities. We identify advantages and limitations of the framework, and discuss future research on the framework.

Department of Defense Technology Transfer (T2) Program

DTIC Science & Technology

2014-04-08

January February (1st Monday) Disposal System Performance Spec Production Representative Articles CARD – Cost Analysis Requirements Description CCE...Supportability Objectives Exit Criteria Met APB MTA FMECA FTA LORA RCM MS B Threshold/objective tradeoffs – Revised Performance Attributes MS C MS A...Evaluation FTA – Failure Tree Analysis IOT&E – Initial Operational Test & Evaluation ISR – In-Service Review ISP – Information Support Plan ITR – Initial

Multiple-scattering model for inclusive proton production in heavy ion collisions

NASA Technical Reports Server (NTRS)

Cucinotta, Francis A.

1994-01-01

A formalism is developed for evaluating the momentum distribution for proton production in nuclear abrasion during heavy ion collisions using the Glauber multiple-scattering series. Several models for the one-body density matrix of nuclei are considered for performing numerical calculations. Calculations for the momentum distribution of protons in abrasion are compared with experimental data for inclusive proton production.

Effect of tire size on skidder productivity

Treesearch

Richard W. Brinkcr; John F. Klepac; Bryce J. Stokes; Joe D. Roberson

1996-01-01

During the Spring of 1996 a collaborative effort among Mead Coated Board. the Auburn University School of Forestry. and the Southern Research Station was initiated to evaluate skidder production performance as a function of tire size and soil condition (i.e. wet and dry season)_ The objective of the study was to determine production and cost differences among 28L-26....

Evaluation of sorghum straw hemicellulosic hydrolysate for biotechnological production of xylitol by Candida guilliermondii

PubMed Central

Sene, L.; Arruda, P.V.; Oliveira, S.M.M.; Felipe, M.G.A.

2011-01-01

A preliminary study on xylitol production by Candida guilliermondii in sorghum straw hemicellulosic hydrolysate was performed. Hydrolysate had high xylose content and inhibitors concentrations did not exceed the commonly found values in other hemicellulosic hydrolysates. The highest xylitol yield (0.44 g/g) and productivity (0.19 g/Lh) were verified after 72 hours. PMID:24031733

Effect of tire size on skidder productivity

Treesearch

Richard W. Brinker; John F. Klepac; Bryce J. Stokes; Joe D. Roberson

1996-01-01

During the spring of 1996 a collaborative effort among Mead Coated Board, the Auburn University School of Forestry, and the Southern Research Station was initiated to evaluate skidder production performance as a function of tire size and soil condition (i.e., wet and dry season). The objective of the study was to determine production and cost differences among 28L-26,...

Effects of Temperature and pH on Reduction of Bacteria in a Point-of-Use Drinking Water Treatment Product for Emergency Relief

PubMed Central

Marois-Fiset, Jean-Thomas; Carabin, Anne; Lavoie, Audrey

2013-01-01

The effects of temperature and pH on the water treatment performance of a point-of-use (POU) coagulant/disinfectant product were evaluated. Cold temperatures (∼5°C) reduced the bactericidal efficiency of the product with regard to Escherichia coli and total coliform log10 reductions. PMID:23335762

Improving EGSB reactor performance for simultaneous bioenergy and organic acid production from cheese whey via continuous biological H2 production.

PubMed

Ramos, Lucas Rodrigues; Silva, Edson Luiz

2017-07-01

To evaluate the influence of hydraulic retention time (HRT) and cheese whey (CW) substrate concentration (15 and 25 g lactose l -1 ) on the performance of EGSB reactors (R15 and R25, respectively) for H 2 production. A decrease in the HRT from 8 to 4 h favored the H 2 yield and H 2 production rate (HPR) in R15, with maximum values of 0.86 ± 0.11 mmol H 2 g COD -1 and 0.23 ± 0.024 l H 2 h -1 l -1 , respectively. H 2 production in R25 was also favored at a HRT of 4 h, with maximum yield and HPR values of 0.64 ± 0.023 mmol H 2 g COD -1 and 0.31 ± 0.032 l H 2 h -1 l -1 , respectively. The main metabolites produced were butyric, acetic and lactic acids. The EGSB reactor was evaluated as a viable acidogenic step in the two-stage anaerobic treatment of CW for the increase of COD removal efficiency and biomethane production.

Evaluations in support of regulatory and research decisions by the U. S. Environmental Protection Agency for the control of toxic hazards from hazardous wastes, glyphosate, dalapon, and synthetic fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scofield, R.

1984-01-01

This report includes toxicological and regulatory evaluations performed in support of U.S. EPA regulation of toxic materials and hazardous wastes. The first section of the report describes evaluations which support: (a) the regulation of small-volume generators of hazardous wastes, (b) the regulation of hazardous wastes from pesticide manufacturing, and (c) the disposal of the herbicide, silvex. The second section describes the environmental fate, transport, and effect of glyphosate and dalapon. The third section deals with synthetic fuels, including evaluations of synfuel-product toxicity, uncontrolled air emissions, and particular focus on the toxicity of products from several indirect coal liquefaction processes includingmore » methanol synthesis, Fischer-Tropsch, Mobil M-Gasoline, and Lurgi gasification technologies. Three direct coal liquefaction processes were examined for product toxicity and air emissions: Solvent Refined Coal (I and II) and the Exxon Donor Solvent Process. Also described in the third section is an evaluation of environmental and health hazards associated with the use of synthetic fuels from indirect coal liquefaction, direct coal liquefaction, and shale oil. Finally, the fourth section discusses some problems associated with performing, on a contractual basis, scientific and technical evaluations in support of U.S. EPA regulatory and research decisions.« less

The Research and Development of a Soluble Reactants and Products Secondary Battery System

NASA Technical Reports Server (NTRS)

Liu, C. C.

1975-01-01

A redox battery system which employs an aqueous dectrolyte is developed. Results are presented of the following experimental studies (1) measurement of the essential physical and chemical properties of the reactants and products; (2) evaluation of commerically available anion membranes as the cell separator, (3) determination of the composition and degradation mechanism of the anion membrane, and/or developing an anion membrane separator; and (4) evaluation of the performance of prototype secondary battery systems.

Mesh-Sequenced Realizations for Evaluation of Subgrid-Scale Models for Turbulent Combustion (Short Term Innovative Research Program)

DTIC Science & Technology

2018-02-15

conservation equations. The closure problem hinges on the evaluation of the filtered chemical production rates. In MRA/MSR, simultaneous large-eddy...simulations of a reactive flow are performed at different mesh resolution levels. The solutions at each coarser mesh level are constrained by the filtered ...include the replacement of chemical production rates with those filtered from the underlying fine mesh and the construction of ‘exact’ forms for

FRAMEWORK FOR RESPONSIBLE ENVIRONMENTAL DECISION-MAKING (FRED): USING LIFE CYCLE ASSESSMENT TO EVALUATE PREFERABILITY OF PRODUCTS

EPA Science Inventory

Framework for Responsible Environmental Decision-Making (FRED) demonstrates how the life-cycle concept can be used to quantify competing products' environmental performance so that this information may be integrated with considerations of total ownership cost and technical perfor...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - AIR PURATOR CORPORATION HUYGLAS 1405M FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - BHA GROUP, INC. QG061 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - STANDARD FILTER CORPORATION PE16ZU FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

Research Productivity and Perceived Teaching Effectiveness: A Survey of Economics Faculty.

ERIC Educational Resources Information Center

Noser, Thomas C.; And Others

1996-01-01

A national study of university economics faculty (n=343) examined the relationship between self-reported research output and teaching evaluation scores. Findings indicated a very weak relationship between research productivity and classroom performance, but institutional and individual characteristics seemed to explain some differences. Faculty…

Development and implementation of a human accuracy program in patient foodservice.

PubMed

Eden, S H; Wood, S M; Ptak, K M

1987-04-01

For many years, industry has utilized the concept of human error rates to monitor and minimize human errors in the production process. A consistent quality-controlled product increases consumer satisfaction and repeat purchase of product. Administrative dietitians have applied the concepts of using human error rates (the number of errors divided by the number of opportunities for error) at four hospitals, with a total bed capacity of 788, within a tertiary-care medical center. Human error rate was used to monitor and evaluate trayline employee performance and to evaluate layout and tasks of trayline stations, in addition to evaluating employees in patient service areas. Long-term employees initially opposed the error rate system with some hostility and resentment, while newer employees accepted the system. All employees now believe that the constant feedback given by supervisors enhances their self-esteem and productivity. Employee error rates are monitored daily and are used to counsel employees when necessary; they are also utilized during annual performance evaluation. Average daily error rates for a facility staffed by new employees decreased from 7% to an acceptable 3%. In a facility staffed by long-term employees, the error rate increased, reflecting improper error documentation. Patient satisfaction surveys reveal satisfaction, for tray accuracy increased from 88% to 92% in the facility staffed by long-term employees and has remained above the 90% standard in the facility staffed by new employees.

Winter Roadway Maintenance Material Enhancers (Field) Evaluation

DOT National Transportation Integrated Search

2018-04-06

In this study, the performance and cost analysis of four deicers products, i.e., Aqua Salina (AS), Beet Heet (BH), Green Blast (GB), Magic Minus Zero (MMZ), and two references, Rock Salt (RS) and/or Salt Brine (SB) were evaluated through parking lot ...

Protective Coatings for Metals

NASA Technical Reports Server (NTRS)

Ruggieri, D. J.; Rowe, A. P.

1986-01-01

Report evaluates protective coatings for metal structures in seashore and acid-cloud environments. Evaluation result of study of coating application characteristics, repair techniques, and field performance. Products from variety of manufacturers included in study. Also factory-coated panels and industrial galvanized panels with and without topcoats.

Evaluation of Optional and/or Replacement Concrete Sealers

DOT National Transportation Integrated Search

2018-02-01

This is an In-House evaluation of products performed by ODOTs Office of Materials Management. ODOT Spends about $8M per year on coating concrete for esthetic purposes. Built into the coating is sealing capability to help protect the concrete and t...

Analyzing key performance indicators (KPIs) for E-commerce and Internet marketing of elderly products: a review.

PubMed

Tsai, Yuan-Cheng; Cheng, Yu-Tien

2012-01-01

With the transformation of its population structure and economic environment, Taiwan is rapidly becoming an aging society. There is a growing need for elderly products, and therefore the operation of web shops that sell elderly products is important. In an era which values performance management, searching for key performance indicators (KPIs) helps to reveal, if the goals of a web shop are achieved. In the current study, researchers adopted the constructs of the Balanced Scorecard (BSC) to evaluate web shop performance. Additionally, the Delphi method, along with questionnaires, was used to develop 29 indicators. Finally, the decision making trial and evaluation laboratory (DEMATEL) method assisted in identifying the level of importance of the constructs, in which "internal process" ranked top, followed by "learning and growth", "customer", and "financial". "Internal process" was the key construct that impacted other factors, while "customer" was an important construct affected by other factors. By understanding the influences and relationships among the constructs, enterprises can conduct additional monitoring and management to achieve functions of prevention, continuous improvement, and innovation in order to shape their core competence. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Enhanced fuel production in thorium/lithium hybrid blankets utilizing uranium multipliers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitulski, R.H.

1979-10-01

A consistent neutronics analysis is performed to determine the effectiveness of uranium bearing neutron multiplier zones on increasing the production of U/sup 233/ in thorium/lithium blankets for use in a tokamak fusion-fission hybrid reactor. The nuclear performance of these blankets is evaluated as a function of zone thicknesses and exposure by using the coupled transport burnup code ANISN-CINDER-HIC. Various parameters such as U/sup 233/, Pu/sup 239/, and H/sup 3/ production rates, the blanket energy multiplication, isotopic composition of the fuels, and neutron leakages into the various zones are evaluated during a 5 year (6 MW.y.m/sup -2/) exposure period. Although themore » results of this study were obtained for a tokomak magnetic fusion device, the qualitative behavior associated with the use of the uranium bearing neutron multiplier should be applicable to all fusion-fission hybrids.« less

Evaluating Tasks for Performance-Based Assessments: Advice for Music Teachers

ERIC Educational Resources Information Center

Scott, Sheila

2004-01-01

Performance-based assessments allow teachers to systematically observe skills used or demonstrated by students when they create a product, construct a response, or make a presentation (McMillan 2001). These assessments are grounded in performance-based tasks that elicit students' responses in relation to the outcomes of instruction. The criteria…

Advances in life cycle assessment and emergy evaluation with case studies in gold mining and pineapple production

NASA Astrophysics Data System (ADS)

Ingwersen, Wesley W.

Life cycle assessment (LCA) is an internationally standardized framework for assessing the environmental impacts of products that is rapidly evolving to improve understanding and quantification of how complex product systems depend upon and affect the environment. This dissertation contributes to that evolution through the development of new methods for measuring impacts, estimating the uncertainty of impacts, and measuring ranges of environmental performance, with a focus on product systems in non-OECD countries that have not been well characterized. The integration of a measure of total energy use, emergy, is demonstrated in an LCA of gold from the Yanacocha mine in Peru in the second chapter. A model for estimating the accuracy of emergy results is proposed in the following chapter. The fourth chapter presents a template for LCA-based quantification of the range of environmental performance for tropical agricultural products using the example of fresh pineapple production for export in Costa Rica that can be used to create product labels with environmental information. The final chapter synthesizes how each methodological contribution will together improve the science of measuring product environmental performance.

A Comparison of Photocatalytic Oxidation Reactor Performance for Spacecraft Cabin Trace Contaminant Control Applications

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Frederick, Kenneth R.; Scott, Joseph P.; Reinermann, Dana N.

2011-01-01

Photocatalytic oxidation (PCO) is a maturing process technology that shows potential for spacecraft life support system application. Incorporating PCO into a spacecraft cabin atmosphere revitalization system requires an understanding of basic performance, particularly with regard to partial oxidation product production. Four PCO reactor design concepts have been evaluated for their effectiveness for mineralizing key trace volatile organic com-pounds (VOC) typically observed in crewed spacecraft cabin atmospheres. Mineralization efficiency and selectivity for partial oxidation products are compared for the reactor design concepts. The role of PCO in a spacecraft s life support system architecture is discussed.

Performance evaluation of the croissant production line with reparable machines

NASA Astrophysics Data System (ADS)

Tsarouhas, Panagiotis H.

2015-03-01

In this study, the analytical probability models for an automated serial production system, bufferless that consists of n-machines in series with common transfer mechanism and control system was developed. Both time to failure and time to repair a failure are assumed to follow exponential distribution. Applying those models, the effect of system parameters on system performance in actual croissant production line was studied. The production line consists of six workstations with different numbers of reparable machines in series. Mathematical models of the croissant production line have been developed using Markov process. The strength of this study is in the classification of the whole system in states, representing failures of different machines. Failure and repair data from the actual production environment have been used to estimate reliability and maintainability for each machine, workstation, and the entire line is based on analytical models. The analysis provides a useful insight into the system's behaviour, helps to find design inherent faults and suggests optimal modifications to upgrade the system and improve its performance.

Scientific and Regulatory Considerations in Solid Oral Modified Release Drug Product Development.

PubMed

Li, Min; Sander, Sanna; Duan, John; Rosencrance, Susan; Miksinski, Sarah Pope; Yu, Lawrence; Seo, Paul; Rege, Bhagwant

2016-11-01

This review presents scientific and regulatory considerations for the development of solid oral modified release (MR) drug products. It includes a rationale for patient-focused development based on Quality-by-Design (QbD) principles. Product and process understanding of MR products includes identification and risk-based evaluation of critical material attributes (CMAs), critical process parameters (CPPs), and their impact on critical quality attributes (CQAs) that affect the clinical performance. The use of various biopharmaceutics tools that link the CQAs to a predictable and reproducible clinical performance for patient benefit is emphasized. Product and process understanding lead to a more comprehensive control strategy that can maintain product quality through the shelf life and the lifecycle of the drug product. The overall goal is to develop MR products that consistently meet the clinical objectives while mitigating the risks to patients by reducing the probability and increasing the detectability of CQA failures.

Evaluation of the Vehicle Out-of-Commission Standard for Air Force Vehicle Maintenance Units.

DTIC Science & Technology

1995-09-01

been reduced, true performance of the unit has decreased. A study conducted by The Maryland Center for Productivity and Quality of Worklife in 1981...productivity indicators using criteria established by The Maryland Center for Productivity and Quality of Worklife study in 1981. The first conclusion was that...Results," Public Productivity and Management Review. 16: 395-402 (Summer 1993). Kaplan, Robert S. "Implementing the Balanced Scorecard at FMC

Development of processes for the production of solar grade silicon from halides and alkali metals

NASA Technical Reports Server (NTRS)

Dickson, C. R.; Gould, R. K.

1980-01-01

High temperature reactions of silicon halides with alkali metals for the production of solar grade silicon in volume at low cost were studied. Experiments were performed to evaluate product separation and collection processes, measure heat release parameters for scaling purposes, determine the effects of reactants and/or products on materials of reactor construction, and make preliminary engineering and economic analyses of a scaled-up process.

Sustainability evaluation of Sicily's lemon and orange production: an energy, economic and environmental analysis.

PubMed

Pergola, M; D'Amico, M; Celano, G; Palese, A M; Scuderi, A; Di Vita, G; Pappalardo, G; Inglese, P

2013-10-15

The island of Sicily has a long standing tradition in citrus growing. We evaluated the sustainability of orange and lemon orchards, under organic and conventional farming, using an energy, environmental and economic analysis of the whole production cycle by using a life cycle assessment approach. These orchard systems differ only in terms of a few of the inputs used and the duration of the various agricultural operations. The quantity of energy consumption in the production cycle was calculated by multiplying the quantity of inputs used by the energy conversion factors drawn from the literature. The production costs were calculated considering all internal costs, including equipment, materials, wages, and costs of working capital. The performance of the two systems (organic and conventional), was compared over a period of fifty years. The results, based on unit surface area (ha) production, prove the stronger sustainability of the organic over the conventional system, both in terms of energy consumption and environmental impact, especially for lemons. The sustainability of organic systems is mainly due to the use of environmentally friendly crop inputs (fertilizers, not use of synthetic products, etc.). In terms of production costs, the conventional management systems were more expensive, and both systems were heavily influenced by wages. In terms of kg of final product, the organic production system showed better environmental and energy performances. Copyright © 2013 Elsevier Ltd. All rights reserved.

Markovian prediction of future values for food grains in the economic survey

NASA Astrophysics Data System (ADS)

Sathish, S.; Khadar Babu, S. K.

2017-11-01

Now-a-days prediction and forecasting are plays a vital role in research. For prediction, regression is useful to predict the future value and current value on production process. In this paper, we assume food grain production exhibit Markov chain dependency and time homogeneity. The economic generative performance evaluation the balance time artificial fertilization different level in Estrusdetection using a daily Markov chain model. Finally, Markov process prediction gives better performance compare with Regression model.

Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete

PubMed Central

Kim, Sun-Woo; Jang, Seok-Joon; Kang, Dae-Hyun; Ahn, Kyung-Lim; Yun, Hyun-Do

2015-01-01

Conventional concrete production that uses ordinary Portland cement (OPC) as a binder seems unsustainable due to its high energy consumption, natural resource exhaustion and huge carbon dioxide (CO2) emissions. To transform the conventional process of concrete production to a more sustainable process, the replacement of high energy-consumptive PC with new binders such as fly ash and alkali-activated slag (AAS) from available industrial by-products has been recognized as an alternative. This paper investigates the effect of curing conditions and steel fiber inclusion on the compressive and flexural performance of AAS concrete with a specified compressive strength of 40 MPa to evaluate the feasibility of AAS concrete as an alternative to normal concrete for CO2 emission reduction in the concrete industry. Their performances are compared with reference concrete produced using OPC. The eco-efficiency of AAS use for concrete production was also evaluated by binder intensity and CO2 intensity based on the test results and literature data. Test results show that it is possible to produce AAS concrete with compressive and flexural performances comparable to conventional concrete. Wet-curing and steel fiber inclusion improve the mechanical performance of AAS concrete. Also, the utilization of AAS as a sustainable binder can lead to significant CO2 emissions reduction and resources and energy conservation in the concrete industry. PMID:28793639

Comparison of performance on process- and product-oriented assessments of fundamental motor skills across childhood.

PubMed

Logan, Samuel W; Barnett, Lisa M; Goodway, Jacqueline D; Stodden, David F

2017-04-01

Process-oriented motor competence (MC) assessments evaluate how a movement is performed. Product-oriented assessments evaluate the outcome of a movement. Determining the concurrent validity of process and product assessments is important to address the predictive utility of motor competence for health. The current study aimed to: (1) compare process and product assessments of the standing long jump, hop and throw across age groups and (2) determine the capacity of process assessments to classify levels of MC. Participants included 170 children classified into three age groups: 4-5, 7-8 and 10-11 years old. Participants' skills were examined concurrently using three process assessments ((Test of Gross Motor Development-2nd edition [TGMD-2]), Get Skilled; Get Active, and developmental sequences) and one product measure (throw speed, jump and hop distance). Results indicate moderate to strong correlations between (1) process assessments across skills and age groups (r range = .37-70) and (2) process and product assessments across skills and age groups (r range = .26-.88). In general, sensitivity to detect advanced skill level is lowest for TGMD-2 and highest for developmental sequences for all three skills. The use of process and product assessments is suggested to comprehensively capture levels of MC in human movement.

Faculty Research Productivity: Why Do Some of Our Colleagues Publish More than Others?

ERIC Educational Resources Information Center

Hesli, Vicki L.; Lee, Jae Mook

2011-01-01

The justification for studying faculty research productivity is that it affects individual advancement and reputation within academe, as well as departmental and institutional prestige (Creamer 1998, iii). Publication records are an important factor in faculty performance evaluations, research grant awards, and promotion and salary decisions. The…

Not-from-concentrate blueberry juice extraction utilizing frozen fruit, heated mash, and enzyme processes

USDA-ARS?s Scientific Manuscript database

Juice production is a multibillion dollar industry and an economical way to use fruit past seasonal harvests. To evaluate how production steps influence not-from-concentrate (NFC) blueberry (Vaccinium sp.) juice recovery, bench top and pilot scale experiments were performed. In bench-top, southern h...

An integrated approach utilizing chemometrics and GC/MS for classification of chamomile flowers, essential oils and commerical products

USDA-ARS?s Scientific Manuscript database

As part of an ongoing research program on authentication, safety and biological evaluation of phytochemicals and dietary supplements, an in-depth chemical investigation of different types of chamomile was performed. A collection of chamomile samples including authenticated plants, commercial product...

Tackling Production Techniques: Vacations via Kodak's Visualmaker.

ERIC Educational Resources Information Center

Martin, Ron

1986-01-01

Describes a library media production activity in which each student uses a Kodak Ektagraphic Visualmaker to produce a color slide illustrating his/her winter vacation. The project is designed to be low-budget and to involve uncomplicated equipment. Included are explanations of performance objectives, materials, procedures, and evaluation. (EM)

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, BHA GROUP, INC., QP131 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, W.L. GORE & ASSOCIATES, INC., L4427 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - W.L. GORE & ASSOCIATES, INC. L4347 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, POLYMER GROUP, INC., DURAPEX PET FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - ALBANY INTERNATIONAL CORP. INDUSTRIAL PROCESS TECHNOLOGIES PRIMATEX PLUS I FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS, W.L. GORE & ASSOCIATES, INC. LYSB3 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size for particles equal to or smaller than...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - BASF CORPORATION AX/BA-14/9-SAXP FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS, BWF AMERICA, INC. GRADE 700 MPS POLYESTER FELT FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size for particles equal to or smaller than...

Flue gas desulfurization gypsum: Its effectiveness as an alternative bedding material for broiler production

USDA-ARS?s Scientific Manuscript database

Flue gas desulfurization gypsum (FGDG) may be a viable low-cost alternative bedding material for broiler production. In order to evaluate FGD gypsum’s viability, three consecutive trials were conducted to determine its influence on live performance (body weight, feed consumption, feed efficiency, an...

A Web-Based Common Framework to Support the Test and Evaluation Process Any Time, Anywhere, and Anyhow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schur, Anne; Brown, James C.; Eaton, Sharon L.

Test and evaluation (T and E) is an enterprise. For any product, large or small, performance data is desired on many aspects to evaluate the product?s effectiveness for the intended users. Representing the many T and E facets without bewildering the user is challenging when there is a range of people, from the system developers to the manager of the organization, that want specific feedback. A web-based One-Stop Evaluation Center was created to meet these needs for a particular project. The evaluation center is usable at any time in the systems development lifecycle and streamlines the T and E enterprise.more » This paper discusses a common framework that unifies the T and E process with many stakeholders involved and is flexible to accommodate each stakeholders?specific evaluative processes and content. Our success has translated to many cost savings by enabling quick responses to change and a better line of communication between the users, developers, and managers.« less

A Compendium of Assessment Techniques.

ERIC Educational Resources Information Center

Knapp, Joan; Sharon, Amiel

A wide variety of techniques are appropriate for evaluating different types of experiential learning. This monograph includes sections on performance tests, simulations, interviews, ratings, self evaluation, and product assessment. Each section orients the reader to one of these general types of assessment and then provides brief illustrations of…

User Evaluation of Hypermedia Encyclopedias.

ERIC Educational Resources Information Center

Gillham, Mark; Buckner, Kathy

1997-01-01

To establish evaluation criteria for home multimedia products, this study examined 13 case studies of experienced users of CD-ROM encyclopedias aimed at the home consumer. Findings ranked seven features from most to least important: searching; textual content; browsing; multimedia; aesthetics; interactivity; and system performance. Results suggest…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slad, George William; Merchant, Bion J.

The Seismo - Hydroacoustic Data Acquisition System (SHDAS) is undergoing evaluation in preparation for its engineering, development, and deployment by the U.S Navy as an ocean bottom seismic monitoring system. At the current stage of development, the production seismometers are being evaluated to confirm their performance prior to packaging and assembly for deployment. The testing of the seismometers is being conducted at the Pinon Flats Observatory (PFO) , supervised by Sandia National Laboratories, U.S Navy, and RP Kromer Consulting. SNL will conduct evaluation of the collected seismometer data and comment on the performance of the seismometers.

Evaluation of the effects of low energetic microwave irradiation on anaerobic digestion.

PubMed

Bastiaens, Bert; Van den Broeck, Rob; Appels, Lise; Dewil, Raf

2017-11-01

The present study investigates the effects of microwave irradiation on the performance of anaerobic digestion processes. A first set of experiments is performed to distinguish the upper limit of the applied energy levels. Secondly, the effects of these treatments on the performance of the digestion process are evaluated in 3 experimental setups: (i) monitoring the acetic acid degradation, (ii) performing a biological methane potential (BMP) assay and (iii) conducting a specific methanogenic activity (SMA) test. The solubilisation experiment reveals a limited degree of disintegration of anaerobic biomass up to a microwave treatment of 10000 kJ/kg TS. Above this threshold value the soluble COD level started to rise, with up to 350% at 30000 kJ/kg TS regardless of the microwave output power. Because solubilisation of the biomass increases the easily degradable content, this would lead to false observations regarding increased activity. Therefore, solubilisation is minimized by limiting the microwave treatment to a maximum of 6000 kJ/kg TS during the second part of the experiments. Monitoring the degradation of acetic acid after a low intensity microwave treatment, reveals that microwave irradiation shortens the lag phase, e.g., from 21 to 3 h after a microwave treatment of 1000 kJ/kg TS at 100 W. However most treatments also result in a decrease of the maximum degradation and of the degradation rate of acetic acid. BMP assays are performed to evaluate the activity and performance of the entire anaerobic community. Every treatment results in a decreased biogas production potential and decreased biogas production rate. Moreover, each treatment induced an increase of the lag phase. The SMA experiments show no influence of the microwave irradiation in terms of biogas or methane production. Copyright © 2017 Elsevier Ltd. All rights reserved.

GATEWAY Report Brief: Evaluating OLED Lighting in the Accounting Office of DeJoy, Knauf & Blood LLP

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Summary of GATEWAY report evaluating a new lighting system, at the offices of the accounting firm of DeJoy, Knauf & Blood, LLP in Rochester, NY, that incorporates a number of different OLED luminaires. Evaluation of the OLED products included efficacy performance, field measurements of panel color, flicker measurements, and staff feedback.

Nutritional properties and consumer evaluation of donkey bresaola and salami: comparison with conventional products.

PubMed

Marino, R; Albenzio, M; Della Malva, A; Muscio, A; Sevi, A

2015-03-01

Nutritional properties and consumer evaluation were performed in bresaola and salami from donkey meat compared with respective conventional products. Donkey bresaola and salami showed higher content of protein and lower content of fat than beef bresaola and pork salami. Significant differences in the unsaturation level of fatty acids were found. Particularly, donkey meat products showed lower saturated fatty acids, higher polyunsatured fatty acid content and better nutritional indices than conventional beef bresaola and pork salami. Furthermore, donkey meat products, especially bresaola, showed the highest content of essential amino acids. Both donkey meat products resulted to be more tender than conventional products, in addition donkey bresaola showed also higher consumer acceptability. Our investigation demonstrates the possibility of processing donkey meat into products comparable to traditional ones with a high nutritional value. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluating Environmental Effects of Dredged Material Management Alternatives - A Technical Framework. Revision

DTIC Science & Technology

2004-05-01

Significant Impact HELPQ - Hydrologic Evaluation of Leachate Production and Quality HELP - Hydrologic Evaluation of Landfill Performance LDC...BIOASSAY SURFACE RUNOFF CONTROLS • PONDING • TREATMENT • OTHERS (5.3.6) AND EVALUATE AND /OR GROUNDWATER /OR LEACHATE • • • LEACHATE TESTING... LEACHATE CONTROLS COVERS LINERS TREATMENT PLANT BIOASSAY PLANT UPTAKE CONTROLS • COVERS • SELECTIVE VEGETATION (5.1) (5.2) (5.3

Evaluation of precipitation trends from high-resolution satellite precipitation products over Mainland China

NASA Astrophysics Data System (ADS)

Chen, Fengrui; Gao, Yongqi

2018-01-01

Many studies have reported the excellent ability of high-resolution satellite precipitation products (0.25° or finer) to capture the spatial distribution of precipitation. However, it is not known whether the precipitation trends derived from them are reliable. For the first time, we have evaluated the annual and seasonal precipitation trends from two typical sources of high-resolution satellite-gauge products, TRMM 3B43 and PERSIANN-CDR, using rain gauge observations over China, and they were also compared with those from gauge-only products (0.25° and 0.5° precipitation products, hereafter called CN25 and CN50). The evaluation focused mainly on the magnitude, significance, sign, and relative order of the precipitation trends, and was conducted at gridded and regional scales. The following results were obtained: (1) at the gridded scale, neither satellite-gauge products precisely measure the magnitude of precipitation trends but they do reproduce their sign and relative order; regarding capturing the significance of trends, they exhibit relatively acceptable performance only over regions with a sufficient amount of significant precipitation trends; (2) at the regional scale, both satellite-gauge products generally provide reliable precipitation trends, although they do not reproduce the magnitude of trends in winter precipitation; and (3) overall, CN50 and TRMM 3B43 outperform others in reproducing all four aspects of the precipitation trends. Compared with CN25, PERSIANN-CDR performs better in determining the magnitude of precipitation trends but marginally worse in reproducing their sign and relative order; moreover, both of them are at a level in capturing the significance of precipitation trends.

Conducting effective performance appraisals.

PubMed

2001-01-01

According to experts, performance appraisals rate just below firing someone as the least favorite thing managers do. Many factors contribute to this view--one is that current systems do a poor job of evaluating performance and in fact often impede both evaluation and performance. When used as part of an ongoing supportive process of goal setting and feedback, performance appraisals can enhance performance and morale. One alternative to traditional employee evaluation methods is full-circle or 360-degree feedback. Contained in this issue are practical suggestions for preparing employees for performance appraisals which, when followed daily, encourage employees to put their best feet forward as part of their regular routine. Also included is a template specific to assessing the performance of clinical laboratory technologists . Additionally, numerous resources are provided to help you refine appraisal systems to fit your needs. Full-circle feedback is proving to be a boon to managers. It relieves them from being the exclusive "heavies" in evaluating performance, integrates appraisal input from several sources, and incorporates increasing employee skills, competencies, and satisfaction, thus improving productivity of people and processes. And aren't integration and continuous improvement what the laboratory is all about?

PrismTech Data Distribution Service Java API Evaluation

NASA Technical Reports Server (NTRS)

Riggs, Cortney

2008-01-01

My internship duties with Launch Control Systems required me to start performance testing of an Object Management Group's (OMG) Data Distribution Service (DDS) specification implementation by PrismTech Limited through the Java programming language application programming interface (API). DDS is a networking middleware for Real-Time Data Distribution. The performance testing involves latency, redundant publishers, extended duration, redundant failover, and read performance. Time constraints allowed only for a data throughput test. I have designed the testing applications to perform all performance tests when time is allowed. Performance evaluation data such as megabits per second and central processing unit (CPU) time consumption were not easily attainable through the Java programming language; they required new methods and classes created in the test applications. Evaluation of this product showed the rate that data can be sent across the network. Performance rates are better on Linux platforms than AIX and Sun platforms. Compared to previous C++ programming language API, the performance evaluation also shows the language differences for the implementation. The Java API of the DDS has a lower throughput performance than the C++ API.

Fabrication and Improvement of Lmsc's All-silica RSI

NASA Technical Reports Server (NTRS)

Beasley, R. M.; Izu, Y. D.; Nakano, H. N.; Ozolin, A. A.; Peachman, A.

1973-01-01

The LI-1500 and LI-900 all silica RSI materials have made the transition from laboratory to manufacturing operation. Improvements in both quality and reproducibility have been achieved. The LI-1500 material has displayed superior reliability in evaluations conducted at various facilities. The dependable performance of the material is attributed to the adherence to the stringent requirements of the numerous material, process, and product control evaluations and inspection points performed during manufacture.

Effective production planning for purchased part under long lead time and uncertain demand: MRP Vs demand-driven MRP

NASA Astrophysics Data System (ADS)

Shofa, M. J.; Moeis, A. O.; Restiana, N.

2018-04-01

MRP as a production planning system is appropriate for the deterministic environment. Unfortunately, most production systems such as customer demands are stochastic, so that MRP is inappropriate at the time. Demand-Driven MRP (DDMRP) is new approach for production planning system dealing with demand uncertainty. The objective of this paper is to compare the MRP and DDMRP for purchased part under long lead time and uncertain demand in terms of average inventory levels. The evaluation is conducted through a discrete event simulation with the long lead time and uncertain demand scenarios. The next step is evaluating the performance of DDMRP by comparing the inventory level of DDMRP with MRP. As result, DDMRP is more effective production planning than MRP in terms of average inventory levels.

Heart of the Hearth: Making the Popular Clean, Not the Clean Popular - Technology Research, Development, and Tools for Clean Biomass Cookstoves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gist, Ryan

This technical report summarizes the work completed by BioLite in fulfilment of the US DOE EERE award. The work plan focused on three key objectives: developing an optimized combustion system that demonstrates high combustion efficiency and low PM 2.5 and CO emissions, integrate the system into popular stove phenotypes – side-fed rocket stove architecture like the BioLite HomeStove, and the Patsari chimney stove in Mexico such that they maintain their important phenotypical characteristics, independently evaluate quantitative fuel and emissions performance of the integrated ‘Turbo-Patsari’ in Mexican households. The project activities were organized into six major tasks: A. Develop, fabricate, andmore » test proof-of-concept prototypes B. Develop field prototypes, assess user feedback and field performance C. Define revised stove design for pre-production model, Identify manufacturing requirements and estimated cost to build, Conduct reliability, emissions, and performance testing of pre-production Turbo-Patsari D. Build pre-production Turbo-Patsari stove combustion cores E. Conduct pre-production field trials F. Summarize field trial results and evaluate Turbo-Patsari for potential volume production. A two-pronged approach was adopted for the above tasks. The first involved building a modular test platform that allowed parametric variation of multiple stove design parameters that directly affect its performance – heat output, thermal efficiency, and emissions. The second part of the approach comprised of building a surrogate Patsari based on GIRA’s specifications that could then be modified or retrofitted for optimum performance based on the learnings from the modular test platform. The following sections of the report will describe the findings of tests on these platform, the subsequent development, design, and installation of the Turbo-Patsari, and finally the in-home field trial.« less

Revalidation of the NASA Ames 11-by 11-Foot Transonic Wind Tunnel with a Commercial Airplane Model

NASA Technical Reports Server (NTRS)

Kmak, Frank J.; Hudgins, M.; Hergert, D.; George, Michael W. (Technical Monitor)

2001-01-01

The 11-By 11-Foot Transonic leg of the Unitary Plan Wind Tunnel (UPWT) was modernized to improve tunnel performance, capability, productivity, and reliability. Wind tunnel tests to demonstrate the readiness of the tunnel for a return to production operations included an Integrated Systems Test (IST), calibration tests, and airplane validation tests. One of the two validation tests was a 0.037-scale Boeing 777 model that was previously tested in the 11-By 11-Foot tunnel in 1991. The objective of the validation tests was to compare pre-modernization and post-modernization results from the same airplane model in order to substantiate the operational readiness of the facility. Evaluation of within-test, test-to-test, and tunnel-to-tunnel data repeatability were made to study the effects of the tunnel modifications. Tunnel productivity was also evaluated to determine the readiness of the facility for production operations. The operation of the facility, including model installation, tunnel operations, and the performance of tunnel systems, was observed and facility deficiency findings generated. The data repeatability studies and tunnel-to-tunnel comparisons demonstrated outstanding data repeatability and a high overall level of data quality. Despite some operational and facility problems, the validation test was successful in demonstrating the readiness of the facility to perform production airplane wind tunnel%, tests.

Laboratory and field evaluation of the impact of exercise on the performance of regular and polymer-based deet repellents.

PubMed

Schofield, Steven; Tepper, Martin; Gadawski, Randy

2007-11-01

Studies were done in Manitoba, Canada, to evaluate the impact of exercise on repellent performance against mosquitoes. Two products containing the active ingredient N,N-diethyl-3-methylbenzamide (deet) were tested; one product was a polymer-based cream (3M Ultrathon Insect Repellent) and the other product was an alcohol-based pump spray formulation (Muskol Insect Repellent). Assessments were done in the laboratory using Aedes aegypti (L.) and in the field with naturally occurring populations of mosquitoes. Repellent was applied to the forearms (laboratory) or a lower leg (field) of test subjects at 1.5 g of test product per 600 cm2 surface area (0.75 or 0.83 mg deet/cm2). For a given test day, subjects exercised or did not. Exposure to mosquito attack was for 1 min at 30-min intervals in laboratory procedures, and it was continuous in field tests. Performance was measured as complete protection time (CPT). Moderate levels of physical activity resulted in a >40% decline in mean CPT, from 468 to 267 min in the laboratory experiments and from 359 to 203 min in field tests. Repellent product did not affect the magnitude of the decline. Mean biting pressure during field trials was 21.3 bites per min, and mosquito collections were made up primarily of Ochlerotatus sticticus (Meigen) and Aedes vexans (Meigen).

Full parabolic trough qualification from prototype to demonstration loop

NASA Astrophysics Data System (ADS)

Janotte, Nicole; Lüpfert, Eckhard; Pottler, Klaus; Schmitz, Mark

2017-06-01

On the example of the HelioTrough® collector development the full accompanying and supporting qualification program for large-scale parabolic trough collectors for solar thermal power plants is described from prototype to demonstration loop scale. In the evaluation process the actual state and the optimization potential are assessed. This includes the optical and geometrical performance determined by concentrator shape, deformation, assembly quality and local intercept factor values. Furthermore, its mechanical performance in terms of tracking accuracy and torsional stiffness and its thermal system performance on the basis of the overall thermal output and heat loss are evaluated. Demonstration loop tests deliver results of collector modules statistical slope deviation of 1.9 to 2.6 mrad, intercept factor above 98%, peak optical performance of 81.6% and heat loss coefficients from field tests. The benefit of such a closely monitored development lies in prompt feedback on strengths, weaknesses and potential improvements on the new product at any development stage from first module tests until demonstration loop evaluation. The product developer takes advantage of the achieved technical maturity, already before the implementation in a commercial power plant. The well-understood performance characteristics allow the reduction of safety margins making the new HelioTrough collector competitive from the start.

Primary broiler breeding--striking a balance between economic and well-being traits.

PubMed

Katanbaf, M N; Hardiman, J W

2010-04-01

Primary breeders are well aware that selecting for better health and well-being along with economic traits such as faster growth rate, higher levels of meat yield, and improved efficiency of feed utilization are critical to balanced long-term genetic progress of their pure lines as well as to increased production efficiency of broiler products for the broiler industry. Cobb collects and selects on over 50 phenotypic observations per pedigree candidate at various ages. Over 50% of these collections are involved with evaluation of each bird's health, welfare, and fitness. Some examples of these traits are various chick defects, various broiler age skeletal and leg abnormalities, feather cover, various physiological measures of heart and lung functions, and specific causes of mortality. Large pedigree populations, massive data collection infrastructure, integration of better technologies in evaluation of phenotypes, and sophisticated data analysis capability have allowed geneticists to perform selections that are balanced for both economic and welfare traits. Cobb's internal as well as worldwide sponsored research has facilitated geneticists to make science-based breeding decisions. Each pedigree line per product available to primary breeders exhibits their own unique characteristics that are enhanced by selective breeding and positioned in special mating schemes to produce the product and welfare performance that our customers demand. Additionally, most if not all primary breeding companies now offer different products for different markets that exhibit varying levels of performance and behavior to fit customer needs. Future expansion of these products and creation of new products by breeding companies will be in large dictated by both our customers and consumers.

Identification and partial characterization of lactic acid bacteria isolated from traditional dairy products produced by herders in the western Tianshan Mountains of China.

PubMed

Zuo, F L; Feng, X J; Chen, L L; Chen, S W

2014-11-01

Thirty strains of lactic acid bacteria (LAB) were isolated from herders' traditional dairy products collected from Xinjiang, China. The species Lactobacillus, Lactococcus, Enterococcus, Pediococcus and Leuconostoc were identified by 16S ribosomal RNA gene sequencing analysis and conventional observation. The strains' fermentation characteristics, including milk acidification, proteolysis, autolysis, antimicrobial activity and diacetyl production, were assayed and compared. Strains NL24 and NL31 showed the highest proteolytic activity-2·75 and 2·08 mmol Phe l(-1) milk, respectively. Strains C, NL41, SW2, Z3-11, NL42 and Z2-91 had high autolytic activity. In addition, most of the wild strains produced diacetyl, half of them to high levels. This study provides a clue to LAB biodiversity in traditional dairy foods produced by herders in the western Tianshan Mountains. High-performing strains should be further evaluated for practical application in value-added fermented dairy products. Our results reveal a certain variety of lactic acid bacteria (LAB) in traditional dairy products from Xinjiang. Some of the LAB strains, such as Lactobacillus rhamnosus NL24 and Lactobacillus paracasei SW2, possess excellent functional properties and have the potential for application in indigenous fermented dairy products. Performance of the newly isolated strains in cheese or yogurt manufacturing was further evaluated. Application of the high-performing strains to enrich the flavour of fermented dairy products is highly desirable and holds great commercial potential. © 2014 The Society for Applied Microbiology.

Second-generation ethanol from non-detoxified sugarcane hydrolysate by a rotting wood isolated yeast strain.

PubMed

Bazoti, Suzana F; Golunski, Simone; Pereira Siqueira, Diego; Scapini, Thamarys; Barrilli, Évelyn T; Alex Mayer, Diego; Barros, Katharina O; Rosa, Carlos A; Stambuk, Boris U; Alves, Sérgio L; Valério, Alexsandra; de Oliveira, Débora; Treichel, Helen

2017-11-01

This work aims to evaluate the production of second-generation ethanol from sugarcane bagasse hydrolysate without acetic acid (inhibitor) detoxification. Three isolated yeast strains from lignocellulosic materials were evaluated, and one strain (UFFS-CE-3.1.2), identified using large subunit rDNA sequences as Wickerhamomyces sp., showed satisfactory results in terms of ethanol production without acetic acid removal. A Plackett-Burman design was used to evaluate the influence of hydrolysate composition and nutrients supplementation in the fermentation medium for the second-generation ethanol production. Two fermentation kinetics were performed, with controlled pH at 5.5, or keeping the initial pH at 4.88. The fermentation conducted without pH adjustment and supplementation of nutrients reported the best result in terms of second-generation ethanol production. Wickerhamomyces sp., isolated as UFFS-CE-3.1.2, was considered promising in the production of second-generation ethanol by using crude (non-detoxified) sugarcane hydrolysate. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sustainability and economic evaluation of microalgae grown in brewery wastewater.

PubMed

Mata, Teresa M; Mendes, Adélio M; Caetano, Nídia S; Martins, António A

2014-09-01

This article evaluates the sustainability and economic potential of microalgae grown in brewery wastewater for biodiesel and biomass production. Three sustainability and two economic indicators were considered in the evaluation within a life cycle perspective. For the production system the most efficient process units were selected. Results show that harvesting and oil separation are the main process bottlenecks. Microalgae with higher lipid content and productivity are desirable for biodiesel production, although comparable to other biofuel's feedstock concerning sustainability. However, improvements are still needed to reach the performance level of fossil diesel. Profitability reaches a limit for larger cultivation areas, being higher when extracted biomass is sold together with microalgae oil, in which case the influence of lipid content and areal productivity is smaller. The values of oil and/or biomass prices calculated to ensure that the process is economically sound are still very high compared with other fuel options, especially biodiesel. Copyright © 2014 Elsevier Ltd. All rights reserved.

Single-Nucleotide Polymorphism-Microarray Ploidy Analysis of Paraffin-Embedded Products of Conception in Recurrent Pregnancy Loss Evaluations.

PubMed

Maslow, Bat-Sheva L; Budinetz, Tara; Sueldo, Carolina; Anspach, Erica; Engmann, Lawrence; Benadiva, Claudio; Nulsen, John C

2015-07-01

To compare the analysis of chromosome number from paraffin-embedded products of conception using single-nucleotide polymorphism (SNP) microarray with the recommended screening for the evaluation of couples presenting with recurrent pregnancy loss who do not have previous fetal cytogenetic data. We performed a retrospective cohort study including all women who presented for a new evaluation of recurrent pregnancy loss over a 2-year period (January 1, 2012, to December 31, 2013). All participants had at least two documented first-trimester losses and both the recommended screening tests and SNP microarray performed on at least one paraffin-embedded products of conception sample. Single-nucleotide polymorphism microarray identifies all 24 chromosomes (22 autosomes, X, and Y). Forty-two women with a total of 178 losses were included in the study. Paraffin-embedded products of conception from 62 losses were sent for SNP microarray. Single-nucleotide polymorphism microarray successfully diagnosed fetal chromosome number in 71% (44/62) of samples, of which 43% (19/44) were euploid and 57% (25/44) were noneuploid. Seven of 42 (17%) participants had abnormalities on recurrent pregnancy loss screening. The per-person detection rate for a cause of pregnancy loss was significantly higher in the SNP microarray (0.50; 95% confidence interval [CI] 0.36-0.64) compared with recurrent pregnancy loss evaluation (0.17; 95% CI 0.08-0.31) (P=.002). Participants with one or more euploid loss identified on paraffin-embedded products of conception were significantly more likely to have an abnormality on recurrent pregnancy loss screening than those with only noneuploid results (P=.028). The significance remained when controlling for age, number of losses, number of samples, and total pregnancies. These results suggest that SNP microarray testing of paraffin-embedded products of conception is a valuable tool for the evaluation of recurrent pregnancy loss in patients without prior fetal cytogenetic results. Recommended recurrent pregnancy loss screening was unnecessary in almost half the patients in our study. II.

Ischemic stroke after using over the counter products containing ephedra.

PubMed

Chen, Cassandra; Biller, Jose; Willing, Steven J; Lopez, Alfredo M

2004-01-15

Dietary supplements containing Ephedra used for weight loss and physical performance enhancement such as "herbal ecstasy" are widely available, and it is estimated that at least 1% of the adult population have taken these products. Ephedra products including Ephedra alkaloids such as phenylpropanolamine or other ephedrine compounds are sold under different names such as Metabolife 356, Ripped Fuel, Thermadrene, and Shape-Fast Plus. Over 2 years, five patients with ischemic infarctions associated with use of Ephedra products were evaluated at Indiana University Hospital. Ephedrine, like other sympathomimetic agents, predisposes patients to both ischemic and hemorrhagic strokes. People who take over the counter Ephedra products that claim to boost weight loss, increase energy, or bolster physical performance are at risk of adverse events including ischemic and hemorrhagic strokes.

Performance of biofuel processes utilising separate lignin and carbohydrate processing.

PubMed

Melin, Kristian; Kohl, Thomas; Koskinen, Jukka; Hurme, Markku

2015-09-01

Novel biofuel pathways with increased product yields are evaluated against conventional lignocellulosic biofuel production processes: methanol or methane production via gasification and ethanol production via steam-explosion pre-treatment. The novel processes studied are ethanol production combined with methanol production by gasification, hydrocarbon fuel production with additional hydrogen produced from lignin residue gasification, methanol or methane synthesis using synthesis gas from lignin residue gasification and additional hydrogen obtained by aqueous phase reforming in synthesis gas production. The material and energy balances of the processes were calculated by Aspen flow sheet models and add on excel calculations applicable at the conceptual design stage to evaluate the pre-feasibility of the alternatives. The processes were compared using the following criteria: energy efficiency from biomass to products, primary energy efficiency, GHG reduction potential and economy (expressed as net present value: NPV). Several novel biorefinery concepts gave higher energy yields, GHG reduction potential and NPV. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of DoD Information Analysis Centers Program: Representative Sample Study - Benefits to DoD from Use of DoD Information Analysis Centers

DTIC Science & Technology

1990-06-01

RAC asserted in general terms that the results of IAC special tasks were general increases in the productivity of their owi organization . In...Linda H. Berkhouse 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8.PERFORMING ORGANIZATION REPORT NUMSER Institute for Defense Analyses 1801 N...In still other instances, we were able to obtain firm estimates from users regarding improvements in their organizations ’ productivity, labor

Formulation and process factors influencing product quality and in vitro performance of ophthalmic ointments.

PubMed

Xu, Xiaoming; Al-Ghabeish, Manar; Rahman, Ziyaur; Krishnaiah, Yellela S R; Yerlikaya, Firat; Yang, Yang; Manda, Prashanth; Hunt, Robert L; Khan, Mansoor A

2015-09-30

Owing to its unique anatomical and physiological functions, ocular surface presents special challenges for both design and performance evaluation of the ophthalmic ointment drug products formulated with a variety of bases. The current investigation was carried out to understand and identify the appropriate in vitro methods suitable for quality and performance evaluation of ophthalmic ointment, and to study the effect of formulation and process variables on its critical quality attributes (CQA). The evaluated critical formulation variables include API initial size, drug percentage, and mineral oil percentage while the critical process parameters include mixing rate, temperature, time and cooling rate. The investigated quality and performance attributes include drug assay, content uniformity, API particle size in ointment, rheological characteristics, in vitro drug release and in vitro transcorneal drug permeation. Using design of experiments (DoE) as well as a novel principle component analysis approach, five of the quality and performance attributes (API particle size, storage modulus of ointment, high shear viscosity of ointment, in vitro drug release constant and in vitro transcorneal drug permeation rate constant) were found to be highly influenced by the formulation, in particular the strength of API, and to a lesser degree by processing variables. Correlating the ocular physiology with the physicochemical characteristics of acyclovir ophthalmic ointment suggested that in vitro quality metrics could be a valuable predictor of its in vivo performance. Published by Elsevier B.V.

[Performance evaluation of CT automatic exposure control on fast dual spiral scan].

PubMed

Niwa, Shinji; Hara, Takanori; Kato, Hideki; Wada, Yoichi

2014-11-01

The performance of individual computed tomography automatic exposure control (CT-AEC) is very important for radiation dose reduction and image quality equalization in CT examinations. The purpose of this study was to evaluate the performance of CT-AEC in conventional pitch mode (Normal spiral) and fast dual spiral scan (Flash spiral) in a 128-slice dual-source CT scanner. To evaluate the response properties of CT-AEC in the 128-slice DSCT scanner, a chest phantom was placed on the patient table and was fixed at the center of the field of view (FOV). The phantom scan was performed using Normal spiral and Flash spiral scanning. We measured the effective tube current time product (Eff. mAs) of simulated organs in the chest phantom along the longitudinal (z) direction, and the dose dependence (distribution) of in-plane locations for the respective scan modes was also evaluated by using a 100-mm-long pencil-type ionization chamber. The dose length product (DLP) was evaluated using the value displayed on the console after scanning. It was revealed that the response properties of CT-AEC in Normal spiral scanning depend on the respective pitches and Flash spiral scanning is independent of the respective pitches. In-plane radiation dose of Flash spiral was lower than that of Normal spiral. The DLP values showed a difference of approximately 1.7 times at the maximum. The results of our experiments provide information for adjustments for appropriate scanning parameters using CT-AEC in a 128-slice DSCT scanner.

Insulation Cork Boards-Environmental Life Cycle Assessment of an Organic Construction Material.

PubMed

Silvestre, José D; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D; Durão, Vera

2016-05-20

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A "cradle-to-cradle" environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows ( i.e. , uptakes and emissions), including sensitivity analysis of this procedure; at the production stage-the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation-the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date "cradle-to-cradle" environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards.

Insulation Cork Boards—Environmental Life Cycle Assessment of an Organic Construction Material

PubMed Central

Silvestre, José D.; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D.; Durão, Vera

2016-01-01

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A “cradle-to-cradle” environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows (i.e., uptakes and emissions), including sensitivity analysis of this procedure; at the production stage—the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation—the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date “cradle-to-cradle” environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards. PMID:28773516

Measurement of Scientific Productivity in R&D Sector: Changing paradigm.

PubMed

Kumar, Abhishek; Srivastava, Alpana; Kumar, R P Jeevan; Tiwari, Rajesh K

2017-01-01

Scientific Productivity is a demand of policy makers for a judicious utilization of massive R&D budget allocated and utilized. A huge mass of intellectual assets is employed, which after investing manpower, infrastructure and lab consumables demand for a major outcome which contributes towards building nation's economy. Scientific productivity was only measured through publications or patents. Patents, earmarked as a strong parameter for innovation generation, where, Word Intellectual Property Organisation generated a data on applications for the top 20 offices for patents, where Australia, Brazil and Canada occupied top 3 positions. India ranked 9th with the total patent applications rising from 39762 (2010) to 42854 (2014) i.e. 15%, whereas, it contributes around 2% Patents (innovative productivity) on global scale. Many studies have come forward interestingly within scientific and academic domains in the form of measurement of scientific performance, however, development of productivity indicators and calculation of Scientific Productivity (SP) as a holistic evaluation system is a significant demand. SP, a herculean task is envisaged for productivity analysis and would submit significant factors towards fabricating an effective measurement engine in a holistic manner viable for an individual and organization, being supplementary to each other. This review projects the significance of performance measurement system in R&D through identification and standardization of key parameters. It also includes emphasis on inclusion of standardized parameters, effective for performance measurement which is applicable for scientists, technical staff as well as lab as a facility. This review aims at providing an insight to the evaluators, policy makers, and high level scientific panels to stimulate the scientific intellects on identified indicators so that their work proceeds to generate productive outcome contributing to the economic growth. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Accuracy assessment: The statistical approach to performance evaluation in LACIE. [Great Plains corridor, United States

NASA Technical Reports Server (NTRS)

Houston, A. G.; Feiveson, A. H.; Chhikara, R. S.; Hsu, E. M. (Principal Investigator)

1979-01-01

A statistical methodology was developed to check the accuracy of the products of the experimental operations throughout crop growth and to determine whether the procedures are adequate to accomplish the desired accuracy and reliability goals. It has allowed the identification and isolation of key problems in wheat area yield estimation, some of which have been corrected and some of which remain to be resolved. The major unresolved problem in accuracy assessment is that of precisely estimating the bias of the LACIE production estimator. Topics covered include: (1) evaluation techniques; (2) variance and bias estimation for the wheat production estimate; (3) the 90/90 evaluation; (4) comparison of the LACIE estimate with reference standards; and (5) first and second order error source investigations.

The GEDI Performance Tool

NASA Astrophysics Data System (ADS)

Hancock, S.; Armston, J.; Tang, H.; Patterson, P. L.; Healey, S. P.; Marselis, S.; Duncanson, L.; Hofton, M. A.; Kellner, J. R.; Luthcke, S. B.; Sun, X.; Blair, J. B.; Dubayah, R.

2017-12-01

NASA's Global Ecosystem Dynamics Investigation will mount a multi-track, full-waveform lidar on the International Space Station (ISS) that is optimised for the measurement of forest canopy height and structure. GEDI will use ten laser tracks, two 10 mJ "power beams" and eight 5 mJ "coverage beams" to produce global (51.5oS to 51.5oN) maps of above ground biomass (AGB), canopy height, vegetation structure and other biophysical parameters. The mission has a requirement to generate a 1 km AGB map with 80% of pixels with ≤ 20% standard error or 20 Mg·ha-1, whichever is greater. To assess performance and compare to mission requirements, an end-to-end simulator has been developed. The simulator brings together tools to propagate the effects of measurement and sampling error on GEDI data products. The simulator allows us to evaluate the impact of instrument performance, ISS orbits, processing algorithms and losses of data that may occur due to clouds, snow, leaf-off conditions, and areas with an insufficient signal-to-noise ratio (SNR). By evaluating the consequences of operational decisions on GEDI data products, this tool provides a quantitative framework for decision-making and mission planning. Here we demonstrate the performance tool by using it to evaluate the trade-off between measurement and sampling error on the 1 km AGB data product. Results demonstrate that the use of coverage beams during the day (lowest GEDI SNR case) over very dense forests (>95% canopy cover) will result in some measurement bias. Omitting these low SNR cases increased the sampling error. Through this an SNR threshold for a given expected canopy cover can be set. The other applications of the performance tool are also discussed, such as assessing the impact of decisions made in the AGB modelling and signal processing stages on the accuracy of final data products.

Evaluating the Environmental Performance of Wood-Based Biofuels

Treesearch

Bruce Lippke; Richard Bergman; Adam Taylor; Maureen E. Puettmann

2012-01-01

The nonprofit Consortium for Research on Renewable Industrial Materials (CORRIM) has been developing comprehensive environmental performance information on wood building materials consistent with life-cycle standards (http://www.corrim.org/). The articles published in this Special Issue of the Forest Products Journal extend the research by the...

ASSESSING UST CORRECTIVE ACTION TECHNOLOGIES: DIAGNOSTIC EVALUATION OF IN SITU SVE-BASED SYSTEM PERFORMANCE

EPA Science Inventory

In situ corrective action technologies are being proposed and installed at an increasing number of underground storage tank (LIST) sites contaminated with petroleum products in saturated and unsaturated zones. It is often difficult to accurately assess the performance of these sy...

Steer Performance and pasture productivity of a tall fescue-bermudagrass system compared with yellow bluestem and coastal panicgrass

USDA-ARS?s Scientific Manuscript database

Year-round grazing in animal production systems has potential in the mid-Atlantic USA. Tall fescue [Lolium arundinaceum (Schreb.) S. J. Darbysh.] is generally the cool-season perennial and bermudagrass [Cynodon dactylon (L.) Pers.] the warm-season perennial in these systems. This study evaluated yel...

Performance evaluation of intensive, pond-based culture systems for catfish production in Mississippi: year one

USDA-ARS?s Scientific Manuscript database

Catfish farming is the leading form of aquaculture in the U.S. and has a significant economic impact in the southern states. Increased feed and energy costs, and competition from foreign imports have recently caused catfish farmers to intensify production as a means of improving efficiency and profi...

Evaluating shrinkage of wood propellers in a high-temperature environment

Treesearch

Richard Bergman; Robert J. Ross

2008-01-01

Minimizing wood shrinkage is a priority for many wood products in use, particularly engineered products manufactured to close tolerances, such as wood propellers for unmanned surveillance aircraft used in military operations. Those currently in service in the Middle East are experiencing performance problems as a consequence of wood shrinking during long-term storage...

Criterion-Referenced Item Banking in Electronics: Appendix G. Final Report.

ERIC Educational Resources Information Center

Gorth, William Phillip; Swaminathan, Hariharan

This is one of the outcomes of the work of the Massachusetts Evaluation Service Center for Occupational Education (ESCOE). After an overview of the Performance Test Development Project, a summary of the major products and byproducts is presented. The major products are: (1) a set of clearly defined, well-structured, and consistent behavioral…

Development of a Pancake-Making Method for a Batter-Based Product

USDA-ARS?s Scientific Manuscript database

Cake and pancake are major batter-based products made with soft wheat flour. A standardized baking method for high-ratio cake has been widely used for evaluating the cake-baking performance of soft wheat flour. Chlorinated flour is used to make high-ratio cake, and the cake formula contains relative...

Evaluating Student-Teacher Linkage Data in Teacher Incentive Fund (TIF) Sites: Acquisition, Verification, and System Development. The Harvesting Project

ERIC Educational Resources Information Center

Watson, Jeffery; Witham, Peter; St. Louis, Timothy

2010-01-01

The U.S. Department of Education Teacher Incentive Fund (TIF) seeks to transform education compensation systems so that principal and teacher performance (measured through classroom productivity measures) connects to compensation. Classroom-level productivity measures require robust student-teacher linkage data. Organizations such as the…

Beef Production Unit for Agricultural Science I Core Curriculum. Instructor's Guide. AGDEX 420/10.

ERIC Educational Resources Information Center

Stewart, Bob R.; And Others

This instructor's guide for a beef production unit contains five lessons that are designed to be taught in the Agricultural Science I core curriculum. Introductory materials include lists of performance objectives and competencies for the complete unit, suggestions for motivational technique/interest approach and evaluation, lists of references…

Influence of growth promoting technologies on animal performance,production economics, environmental impacts and carcass characteristics of beef

USDA-ARS?s Scientific Manuscript database

Objectives: The objectives of this project were to 1) evaluate meat quality characteristics, and 2) identify consumer palatability and label preferences for beef produced with varied levels of technology to facilitate production and marketing decisions and enhance consumer knowledge and trust in bee...

75 FR 14192 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... Production Act of 1993--Joint Venture Under Tip Award No. 70NANB10H014 To Perform Project Entitled: Automated... Project Entitled: Automated Nondestructive Evaluation and Rehabilitation System (``ANDERS'') for Bridge... approaches or fragmented NDE, (2) comprehensive condition and structural assessment (including the...

Estimating annual bole biomass production using uncertainty analysis

Treesearch

Travis J. Woolley; Mark E. Harmon; Kari B. O' Connell

2007-01-01

Two common sampling methodologies coupled with a simple statistical model were evaluated to determine the accuracy and precision of annual bole biomass production (BBP) and inter-annual variability estimates using this type of approach. We performed an uncertainty analysis using Monte Carlo methods in conjunction with radial growth core data from trees in three Douglas...

Sheep Production Unit for Agricultural Science I Core Curriculum. Instructor's Guide. AGDEX 430/10.

ERIC Educational Resources Information Center

Brzozowski, Richard J.; Stewart, Bob R.

This instructor's guide for a sheep production unit contains six lessons that are designed to be taught in the Agricultural Science I core curriculum. Introductory materials include lists of performance objectives and competencies for the complete unit, suggestions for motivational technique/interest approach and evaluation, lists of references…

Trend of knowledge production of research centers in the field of medical sciences in iran.

PubMed

Falahat, K; Eftekhari, Mb; Habibi, E; Djalalinia, Sh; Peykari, N; Owlia, P; Malekafzali, H; Ghanei, M; Mojarrab, Sh

2013-01-01

Establishment of medical research centers at universities and health-related organizations and annually evaluation of their research activities was one of the strategic policies which followed by governmental organization in last decade in order to strengthening the connections between health research system and health system. The aim of this study is to scrutinize the role of medical research centers in medical science production in Iran. This study is a cross sectional which has been performed based on existing reports on national scientometrics and evaluation results of research performance of medical research centers between years 2001 to 2010. During last decade number of medical research centers increased from 53 in 2001 to 359 in 2010. Simultaneous scientific output of medical research centers has been increased especially articles indexed in ISI (web of science). Proper policy implementation in the field of health research system during last decades led to improving capacity building and growth knowledge production of medical science in recent years in Iran. The process embedding research into the health systems requires planning up until research products improves health outcomes and health equity in country.

Cocoa pulp in beer production: Applicability and fermentative process performance.

PubMed

Nunes, Cassiane da Silva Oliveira; de Carvalho, Giovani Brandão Mafra; da Silva, Marília Lordêlo Cardoso; da Silva, Gervásio Paulo; Machado, Bruna Aparecida Souza; Uetanabaro, Ana Paula Trovatti

2017-01-01

This work evaluated the effect of cocoa pulp as a malt adjunct on the parameters of fermentation for beer production on a pilot scale. For this purpose, yeast isolated from the spontaneous fermentation of cachaça (SC52), belonging to the strain bank of the State University of Feira de Santana-Ba (Brazil), and a commercial strain of ale yeast (Safale S-04 Belgium) were used. The beer produced was subjected to acceptance and purchase intention tests for sensorial analysis. At the beginning of fermentation, 30% cocoa pulp (adjunct) was added to the wort at 12°P concentration. The production of beer on a pilot scale was carried out in a bioreactor with a 100-liter capacity, a usable volume of 60 liters, a temperature of 22°C and a fermentation time of 96 hours. The fermentation parameters evaluated were consumption of fermentable sugars and production of ethanol, glycerol and esters. The beer produced using the adjunct and yeast SC52 showed better fermentation performance and better acceptance according to sensorial analysis.

Cocoa pulp in beer production: Applicability and fermentative process performance

PubMed Central

de Carvalho, Giovani Brandão Mafra; da Silva, Gervásio Paulo

2017-01-01

This work evaluated the effect of cocoa pulp as a malt adjunct on the parameters of fermentation for beer production on a pilot scale. For this purpose, yeast isolated from the spontaneous fermentation of cachaça (SC52), belonging to the strain bank of the State University of Feira de Santana-Ba (Brazil), and a commercial strain of ale yeast (Safale S-04 Belgium) were used. The beer produced was subjected to acceptance and purchase intention tests for sensorial analysis. At the beginning of fermentation, 30% cocoa pulp (adjunct) was added to the wort at 12°P concentration. The production of beer on a pilot scale was carried out in a bioreactor with a 100-liter capacity, a usable volume of 60 liters, a temperature of 22°C and a fermentation time of 96 hours. The fermentation parameters evaluated were consumption of fermentable sugars and production of ethanol, glycerol and esters. The beer produced using the adjunct and yeast SC52 showed better fermentation performance and better acceptance according to sensorial analysis. PMID:28419110

Equivalence Testing of Complex Particle Size Distribution Profiles Based on Earth Mover's Distance.

PubMed

Hu, Meng; Jiang, Xiaohui; Absar, Mohammad; Choi, Stephanie; Kozak, Darby; Shen, Meiyu; Weng, Yu-Ting; Zhao, Liang; Lionberger, Robert

2018-04-12

Particle size distribution (PSD) is an important property of particulates in drug products. In the evaluation of generic drug products formulated as suspensions, emulsions, and liposomes, the PSD comparisons between a test product and the branded product can provide useful information regarding in vitro and in vivo performance. Historically, the FDA has recommended the population bioequivalence (PBE) statistical approach to compare the PSD descriptors D50 and SPAN from test and reference products to support product equivalence. In this study, the earth mover's distance (EMD) is proposed as a new metric for comparing PSD particularly when the PSD profile exhibits complex distribution (e.g., multiple peaks) that is not accurately described by the D50 and SPAN descriptor. EMD is a statistical metric that measures the discrepancy (distance) between size distribution profiles without a prior assumption of the distribution. PBE is then adopted to perform statistical test to establish equivalence based on the calculated EMD distances. Simulations show that proposed EMD-based approach is effective in comparing test and reference profiles for equivalence testing and is superior compared to commonly used distance measures, e.g., Euclidean and Kolmogorov-Smirnov distances. The proposed approach was demonstrated by evaluating equivalence of cyclosporine ophthalmic emulsion PSDs that were manufactured under different conditions. Our results show that proposed approach can effectively pass an equivalent product (e.g., reference product against itself) and reject an inequivalent product (e.g., reference product against negative control), thus suggesting its usefulness in supporting bioequivalence determination of a test product to the reference product which both possess multimodal PSDs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion J.

The Seismo-Hydroacoustic Data Acquisition System (SHDAS) is undergoing evaluation in preparation for its engineering, development, and deployment by the U.S Navy as an ocean bottom seismic monitoring system. At the current stage of development, the production digitizers are being evaluated to confirm their performance prior to packaging and assembly for deployment. The testing of the digitizers is being conducted at Delta Group Electronics, the digitizer fabricator, in San Diego, California, performed by Sandia National Laboratories with the assistance of Leidos and Delta Group Electronics.

What Today's Educational Technology Needs: Defensible Evaluations and Realistic Implementation.

ERIC Educational Resources Information Center

Roweton, William E.; And Others

It is argued that in order to make computer assisted instruction effective in the schools, educators should pay more attention to implementation issues (including modifying teacher attitudes, changing classroom routines, and offering realistic technical training and support) and to producing understandable product and performance evaluations.…

Predictive Heterosis in Multibreed Evaluations Using Quantitative and Molecular Approaches

USDA-ARS?s Scientific Manuscript database

Heterosis is the extra genetic boost in performance obtained by crossing two cattle breeds. It is an important tool for increasing the efficiency of beef production. It is also important to adjust data used to calculate genetic evaluations for differences in heterosis. Good estimates of heterosis...

Evaluating the mitigation of greenhouse gas emissions and adaptation in dairy production.

USDA-ARS?s Scientific Manuscript database

Process-level modeling at the farm scale provides a tool for evaluating strategies for both mitigating greenhouse gas emissions and adapting to climate change. The Integrated Farm System Model (IFSM) simulates representative crop, beef or dairy farms over many years of weather to predict performance...

Diagnostic Evaluation of Ozone Production and Horizontal Transport in a Regional Photochemical Air Quality Modeling System

EPA Science Inventory

A diagnostic model evaluation effort has been performed to focus on photochemical ozone formation and the horizontal transport process since they strongly impact the temporal evolution and spatial distribution of ozone (O₃) within the lower troposphere. Results from th...

Evaluating Eco-Innovation of OECD Countries with Data Envelopment Analysis

ERIC Educational Resources Information Center

Mavi, Reza Kiani; Standing, Craig

2016-01-01

Government regulations require businesses to improve their processes and products/services in a green and sustainable manner. For being environmentally friendly, businesses should invest more on eco-innovation practices. Firms eco-innovate to promote eco-efficiency and sustainability. This paper evaluates the eco-innovation performance of…

The Use and Evaluation of Videodiscs in the Chemistry Laboratory.

ERIC Educational Resources Information Center

Russell, Arlene A.; And Others

1985-01-01

Describes a quantitative evaluation of an interactive videodisc program in which students measure the temperature dependence of the solubility product of lead chloride by titration of chloride with silver nitrate using a Mohr titration. Student reaction (based on responses made using the program, quiz answers, and laboratory performance) was…

Performance of particulate containment at nanotechnology workplaces

NASA Astrophysics Data System (ADS)

Lo, Li-Ming; Tsai, Candace S.-J.; Dunn, Kevin H.; Hammond, Duane; Marlow, David; Topmiller, Jennifer; Ellenbecker, Michael

2015-11-01

The evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These control assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems. Activity-based monitoring with direct-reading instruments and filter sampling for microscopy analysis were used to evaluate the effectiveness of control measures at study sites. Our study results showed that weighing CNTs inside the biological safety cabinet can have a 37 % reduction on the particle concentration in the worker's breathing zone, and produce a 42 % lower area concentration outside the enclosure. The ventilated enclosures used to reduce fugitive emissions from the production furnaces exhibited good containment characteristics when closed, but they failed to contain emissions effectively when opened during product removal/harvesting. The exhaust filtration systems employed for exhausting these ventilated enclosures did not provide promised collection efficiencies for removing engineered nanomaterials from furnace exhaust. The exterior hoods were found to be a challenge for controlling emissions from machining nanocomposites: the downdraft hood effectively contained and removed particles released from the manual cutting process, but using the canopy hood for powered cutting of nanocomposites created 15-20 % higher ultrafine (<500 nm) particle concentrations at the source and at the worker's breathing zone. The microscopy analysis showed that CNTs can only be found at production sources but not at the worker breathing zones during the tasks monitored.

Rubidium frequency standard test program for NAVSTAR GPS

NASA Technical Reports Server (NTRS)

Koide, F.; Dederich, D. J.

1978-01-01

Test data of the RFS Program in the Production phase and computer automation are presented, as an essential element in the evaluation of the RFS performance in a simulated spacecraft environment. Typical production test data will be discussed for stabilities from 1 to 100,000 seconds averaging time and simulated time error accumulation test. Also, design considerations in developing the RFS test systems for the acceptance test in production are discussed.

Implementation of fuzzy logic to determining selling price of products in a local corporate chain store

NASA Astrophysics Data System (ADS)

Kristiana, S. P. D.

2017-12-01

Corporate chain store is one type of retail industries companies that are developing growing rapidly in Indonesia. The competition between retail companies is very tight, so retailer companies should evaluate its performance continuously in order to survive. The selling price of products is one of the essential attributes and gets attention of many consumers where it’s used to evaluate the performance of the industry. This research aimed to determine optimal selling price of product with considering cost factors, namely purchase price of the product from supplier, holding costs, and transportation costs. Fuzzy logic approach is used in data processing with MATLAB software. Fuzzy logic is selected to solve the problem because this method can consider complexities factors. The result is a model of determination of the optimal selling price by considering three cost factors as inputs in the model. Calculating MAPE and model prediction ability for some products are used as validation and verification where the average value is 0.0525 for MAPE and 94.75% for prediction ability. The conclusion is this model can predict the selling price of up to 94.75%, so it can be used as tools for the corporate chain store in particular to determine the optimal selling price for its products.

Continuous culture methodology for the screening of microalgae for oil.

PubMed

Del Río, Esperanza; Armendáriz, Ana; García-Gómez, Elena; García-González, Mercedes; Guerrero, Miguel G

2015-02-10

A basic criterion in the selection of microalgae suitable as source of oil for biodiesel should be their actual capacity to produce lipids or, more properly, the fatty acid yield. Performance assessment of 10 preselected microalgae under both batch and continuous culture points to the latter approach as the most adequate for evaluating fatty acid productivity. Differences were patent in continuous culture among strains that otherwise had analogous oil accumulation potential under batch culture. Some promising strains under batch culture (like Muriella aurantiaca and Monoraphidium braunii) exhibited, however, values for actual fatty acid productivity lower than 40 mgL(-1)d(-1) in continuous regime. The analysis performed in photochemostat under continuous culture regime revealed the great potential of Chlorococcum olefaciens, Pseudokirchneriella subcapitata and Scenedesmus almeriensis as oil producing microalgae. Fatty acid productivity levels over 90 mgL(-1)d(-1) were recorded for the latter strains under moderate nitrogen limitation, conditions which led to an enrichment in saturated and monounsaturated fatty acids, a more suitable profile as raw material for biodiesel. The continuous culture methodology employed represents a sound procedure for screening microalgae for biofuel production, providing a reliable evaluation of their fatty acid production capacity, under conditions close to those of outdoor production systems. Copyright © 2015 Elsevier B.V. All rights reserved.

Sensory analysis of characterising flavours: evaluating tobacco product odours using an expert panel.

PubMed

Krüsemann, Erna J Z; Lasschuijt, Marlou P; de Graaf, C; de Wijk, René A; Punter, Pieter H; van Tiel, Loes; Cremers, Johannes W J M; van de Nobelen, Suzanne; Boesveldt, Sanne; Talhout, Reinskje

2018-05-23

Tobacco flavours are an important regulatory concept in several jurisdictions, for example in the USA, Canada and Europe. The European Tobacco Products Directive 2014/40/EU prohibits cigarettes and roll-your-own tobacco having a characterising flavour. This directive defines characterising flavour as 'a clearly noticeable smell or taste other than one of tobacco […]'. To distinguish between products with and without a characterising flavour, we trained an expert panel to identify characterising flavours by smelling. An expert panel (n=18) evaluated the smell of 20 tobacco products using self-defined odour attributes, following Quantitative Descriptive Analysis. The panel was trained during 14 attribute training, consensus training and performance monitoring sessions. Products were assessed during six test sessions. Principal component analysis, hierarchical clustering (four and six clusters) and Hotelling's T-tests (95% and 99% CIs) were used to determine differences and similarities between tobacco products based on odour attributes. The final attribute list contained 13 odour descriptors. Panel performance was sufficient after 14 training sessions. Products marketed as unflavoured that formed a cluster were considered reference products. A four-cluster method distinguished cherry-flavoured, vanilla-flavoured and menthol-flavoured products from reference products. Six clusters subdivided reference products into tobacco leaves, roll-your-own and commercial products. An expert panel was successfully trained to assess characterising odours in cigarettes and roll-your-own tobacco. This method could be applied to other product types such as e-cigarettes. Regulatory decisions on the choice of reference products and significance level are needed which directly influences the products being assessed as having a characterising odour. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

An Integrated Theatre Production for School Nutrition Promotion Program

PubMed Central

Bush, Robert; Box, Selina; McCallum, David; Khalil, Stephanie

2018-01-01

In the context of stubbornly high childhood obesity rates, health promotion activities in schools provide a potential avenue to improve children’s nutritional behaviours. Theatre production has a rich history as a health behaviour promotion strategy but lacks sound, outcome-based evaluation. This study evaluated the effect of an integrated, two-part, place-based theatre performance program with 212 students in five schools in a regional urban and semi-rural area. The program included a theatre performance and a healthy eating competition. A brief survey assessed student healthy eating knowledge and attitudes at three time points. Nutrition behaviour was measured by scoring the contents of children’s lunch boxes before, during and up to six weeks after the intervention. Statistical analysis tested change over time on five variables (Knowledge, Attitude, Sometimes foods, Everyday foods, Overall lunch box score). Results showed that both components of the integrated program improved nutrition knowledge and that the theatre performance improved children’s healthy eating attitudes. All three lunch box scores peaked after the integrated program and remained significantly higher than baseline at 4–6 weeks follow-up. Interaction effects were identified for school catchment area on four of the five dependent variables. Evaluation of this integrated theatre production program indicates the potential benefit of taking a “super-setting” approach. It demonstrates an effect from students taking home information they had learned and incorporating it into lunch box preparation. It also showed consistent effects for school geographical catchment. This study suggests that, with careful, theory-based design, theatre productions in schools can improve student nutritional activities. PMID:29498690

An Integrated Theatre Production for School Nutrition Promotion Program.

PubMed

Bush, Robert; Capra, Sandra; Box, Selina; McCallum, David; Khalil, Stephanie; Ostini, Remo

2018-03-02

In the context of stubbornly high childhood obesity rates, health promotion activities in schools provide a potential avenue to improve children's nutritional behaviours. Theatre production has a rich history as a health behaviour promotion strategy but lacks sound, outcome-based evaluation. This study evaluated the effect of an integrated, two-part, place-based theatre performance program with 212 students in five schools in a regional urban and semi-rural area. The program included a theatre performance and a healthy eating competition. A brief survey assessed student healthy eating knowledge and attitudes at three time points. Nutrition behaviour was measured by scoring the contents of children's lunch boxes before, during and up to six weeks after the intervention. Statistical analysis tested change over time on five variables (Knowledge, Attitude, Sometimes foods, Everyday foods, Overall lunch box score). Results showed that both components of the integrated program improved nutrition knowledge and that the theatre performance improved children's healthy eating attitudes. All three lunch box scores peaked after the integrated program and remained significantly higher than baseline at 4-6 weeks follow-up. Interaction effects were identified for school catchment area on four of the five dependent variables. Evaluation of this integrated theatre production program indicates the potential benefit of taking a "super-setting" approach. It demonstrates an effect from students taking home information they had learned and incorporating it into lunch box preparation. It also showed consistent effects for school geographical catchment. This study suggests that, with careful, theory-based design, theatre productions in schools can improve student nutritional activities.

Evaluation of globally available precipitation data products as input for water balance models

NASA Astrophysics Data System (ADS)

Lebrenz, H.; Bárdossy, A.

2009-04-01

Subject of this study is the evaluation of globally available precipitation data products, which are intended to be used as input variables for water balance models in ungauged basins. The selected data sources are a) the Global Precipitation Climatology Centre (GPCC), b) the Global Precipitation Climatology Project (GPCP) and c) the Climate Research Unit (CRU), resulting into twelve globally available data products. The data products imply different data bases, different derivation routines and varying resolutions in time and space. For validation purposes, the ground data from South Africa were screened on homogeneity and consistency by various tests and an outlier detection using multi-linear regression was performed. External Drift Kriging was subsequently applied on the ground data and the resulting precipitation arrays were compared to the different products with respect to quantity and variance.

Ergonomics and workplace design: application of Ergo-UAS System in Fiat Group Automobiles.

PubMed

Vitello, M; Galante, L G; Capoccia, M; Caragnano, G

2012-01-01

Since 2008 Fiat Group Automobiles has introduced Ergo-UAS system for the balancing of production lines and to detect ergonomic issues. Ergo-UAS system integrates 2 specific methods: MTM-UAS for time measurement and EAWS as ergonomic method to evaluate biomechanical effort for each workstation. Fiat is using a software system to manage time evaluation and ergo characterization of production cycle (UAS) to perform line balancing and obtain allowance factor in all Italian car manufacturing plant. For new car models, starting from New Panda, FGA is applying Ergo-UAS for workplace design since the earliest phase of product development. This means that workplace design is based on information about new product, new layout, new work organization and is performed by a multidisciplinary team (Work Place Integration Team), focusing on several aspects of product and process: safety, quality and productivity. This allows to find and solve ergonomic threats before the start of production, by means of a strict cooperation between product development, engineering and design, manufacturing. Three examples of workstation design are presented in which application of Ergo-UAS was determinant to find out initial excessive levels of biomechanical load and helped the process designer to improve the workstations and define limits of acceptability. Technical activities (on product or on process), or organizational changes, that have been implemented in order to solve the problems are presented. A comparison between "before" and "new" ergonomic scores necessary to bring workstations in acceptable conditions were made.

Comparing the dynamic performance of wastewater treatment systems: A metafrontier Malmquist productivity index approach.

PubMed

Molinos-Senante, María; Hernández-Sancho, Francesc; Sala-Garrido, Ramón

2015-09-15

The assessment of productivity change of wastewater treatment plants (WWTPs) is essential to improve the performance over time of the facilities evaluated. This study assessed and compared the productivity growth of WWTPs operating with non-homogeneous technologies. The metafrontier Malmquist productivity index (MMPI) was computed for a sample of 99 WWTPs encompassing 4 alternative technologies: activated sludge (AS), aerated lagoon (AL), trickling filter (TF) and rotating biological contactor (BD). The results indicated that, on average, WWTPs with AS and BD exhibited better performance over time than WWTPs with AL and TF. The MMPI indicates that, over the period 2007-2009, the productivity rose by 0.9% and 0.3% for AS and BD technologies, respectively, whilst for the AL and TF processes, the productivity decreased by 0.5% and 2.2%, respectively. The decomposition of the MMPI into efficiency change (EC) and technical change (TC) illustrated that EC was a positive driver of productivity change for WWTPs that use AS, whilst TC contributed positively to the productivity growth of WWTPs using AL and BD. Several policy implications to help managers make informed decisions were drawn from our empirical analysis. Copyright © 2015 Elsevier Ltd. All rights reserved.

Field Evaluation of All-Season Tactical Engine Oil OE/HDO-15/40 at Ft. Knox, Kentucky and Ft. Bliss, Texas

DTIC Science & Technology

1986-07-01

qualified lubricants were employed in the test, one product at each of the test locations. The test lubricants were used in all equipment components...Overall, the grade 15W-40 products demonstrated satisfactory and equivalent performance to single-graded oils. The oil was well received by both...operators and maintenance personnel who noted that the grade 15W-40 products significantly reduced logistics burden by having only one grade product to

LOGDIS (Logistics Data Integration System): Productivity evaluation report. [Logistics Data Integration System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultz, E.E.; Abrahams, S.; Banks, W.W. Jr.

1987-08-26

This report presents the results of an end-user productivity study associated with the implementation of LOGDIS (Logistics Data Integration System), a prototype LLNL Gateway system. Its purpose is to provide AFLC decision-makers with data pertaining to estimates of any productivity changes that can be expected or realized by the use of advanced technology and applications software. The effort described in this report focuses on objective functional user productivity and performance changes which can be attributed directly and objectively to LOGDIS.

30 CFR 33.10 - Certificates of approval or performance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Certificates of approval or performance. 33.10 Section 33.10 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL...

30 CFR 33.10 - Certificates of approval or performance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Certificates of approval or performance. 33.10 Section 33.10 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL...

30 CFR 33.10 - Certificates of approval or performance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Certificates of approval or performance. 33.10 Section 33.10 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL...

30 CFR 33.10 - Certificates of approval or performance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Certificates of approval or performance. 33.10 Section 33.10 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL...

30 CFR 33.10 - Certificates of approval or performance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Certificates of approval or performance. 33.10 Section 33.10 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL...

Evaluating the Impacts of "New" Performance Funding in Higher Education

ERIC Educational Resources Information Center

Hillman, Nicholas W.; Tandberg, David A.; Fryar, Alisa H.

2015-01-01

In 2007, Washington adopted the Student Achievement Initiative, a statewide performance accountability system designed to improve retention rates and degree productivity among community colleges. Using difference-in-differences analysis, we found that the policy change has had little immediate effect on retention rates or associate's degree…

Evaluating Outdoor Experiential Training for Leadership and Team Building.

ERIC Educational Resources Information Center

Williams, Scott D.; Graham, T. Scott; Baker, Bud

2003-01-01

Presents a model for calculating the return on investment in outdoor experiential training that focuses on pre- and posttraining behavior and business performance. Includes a method for converting data on turnover, absenteeism, productivity, quality, and job performance into monetary values to compute return. (Contains 54 references.) (SK)

Laboratory evaluation of influence of operational tolerance (acceptance criterion) on performance of hot-mix asphalt concrete.

DOT National Transportation Integrated Search

2010-06-01

The performance of flexible pavements relies heavily on the final quality of the hot-mix asphalt concrete (HMAC) as it : is produced and placed in the field. To account for production and construction variability while ensuring the quality of the : H...

Performance evaluation of biomass sorghum in Hawaii and Texas

USDA-ARS?s Scientific Manuscript database

Although biomass sorghum [Sorghum bicolor (L.) Moench] has been identified as a high yielding bioenergy feedstock crop on the continental USA, there is lack of conclusive data on its performance in HI. The objective of this study was to (i) determine the adaptability and productivity of two biomass...

The Impact of Diagnosing Skill Deficiencies and Assessment-Based Communication Training on Managerial Performance.

ERIC Educational Resources Information Center

Papa, Michael J.; Graham, Elizabeth E.

1991-01-01

Evaluates an organizational diagnosis program that assesses managerial communication skills and provides the frame for follow-up training programs. Finds that managers participating in follow-up communication skills training performed significantly higher on interpersonal skills, problem-solving ability, and productivity over three long-term…

Characterizing scientific production of Italian Oral Surgery professionals through evaluation of bibliometric indices.

PubMed

Tetè, Stefano; Zizzari, Vincenzo Luca; De Carlo, Alessandro; Lorusso, Felice; Di Nicola, Marta; Piattelli, Adriano; Gherlone, Enrico; Polimeni, Antonella

2014-01-01

The aim of this study was to characterize the scientific production of Italian Oral Surgery professionals by evaluating different bibliometric indices. The bibliometric evaluation was conducted on the Scopus Database upon all the Active Members joining three important Italian scientific societies in Oral Surgery (SIdCO, SIO, and SICOI). The scientific production was analysed by considering the number of total publications, number of total citations, h-index, and hc-index. Moreover, the overall sample was divided into two groups (Academics and Not Academics), according to the fact the professionals had or not a university position, and then into sub-groups according to the different career lengths. Statistical analyses were performed to compare the scientific productivity amongst groups. For all the considered parameters a lack of homogeneity between groups was reported, and significantly greater mean values were recorded for the Academics compared to the Not Academics Group. Moreover, the h-index values increased more regularly as the career length progressed than the hc-index values, even if the last seemed to be less variable. h- and hc-indices are both stable bibliometric parameters, but as the hc-index values are related not only to the number of citation but also to their age, it seems to be less influenced by the authors' career length. Bibliometric analysis of the scientific production in dentistry may facilitate the recognition of factors that may further enhance research activity and clinical performance and be useful for a comparative assessment of authors or research groups in terms of quality and quantity of the scientific production.

Comparison of the Utility of Two Assessments for Explaining and Predicting Productivity Change: Well-Being Versus an HRA.

PubMed

Gandy, William M; Coberley, Carter; Pope, James E; Rula, Elizabeth Y

2016-01-01

To compare utility of employee well-being to health risk assessment (HRA) as predictors of productivity change. Panel data from 2189 employees who completed surveys 2 years apart were used in hierarchical models comparing the influence of well-being and health risk on longitudinal changes in presenteeism and job performance. Absenteeism change was evaluated in a nonexempt subsample. Change in well-being was the most significant independent predictor of productivity change across all three measures. Comparing hierarchical models, well-being models performed significantly better than HRA models. The HRA added no incremental explanatory power over well-being in combined models. Alone, nonphysical health well-being components outperformed the HRA for all productivity measures. Well-being offers a more comprehensive measure of factors that influence productivity and can be considered preferential to HRA in understanding and addressing suboptimal productivity.

Ultra high performance liquid chromatography with tandem mass spectrometry screening and mutagenicity evaluation of photodegradation products of Carmoisine (E122) dye in a beverage.

PubMed

Yamjala, Karthik; Nainar, Meyyanathan Subramania; Ramisetti, Nageswara Rao

2016-06-01

The present study deals with the separation and identification of the photodegradation products formed when a commercial soft drink containing Carmoisine (E122) dye was exposed to natural sunlight. An ultra high performance liquid chromatography with quadrupole time-of-flight tandem mass spectrometry method was developed and validated to identify the unknown species of E122. During the study, it was observed that the dye decolourizes rapidly in beverage when compared to model standard solutions. The sunlight irradiation of beverage containing E122 resulted in four photodegradation products as identified by nontarget screening using high-resolution tandem mass spectrometry. Accurate mass measurements were used to identify the elemental composition, and to elucidate the structures of degradation products a software tool was employed. The degradation products (P1-P4) were formed from the interactions of the dye with other ingredients present in the beverage. The toxicity of the degradation products was evaluated on five bacterial strains (TA98, TA100, TA1535, TA1537, and WP2 uvrA pKM101) through an in vitro bacterial reverse mutation assay. The photodegradation products showed strong mutagenic potential in strain TA 100 (without S9) as detected by the Ames assay. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Determinants of business sustainability: an ergonomics perspective.

PubMed

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human performance issues, a combined macro-micro ergonomic methodology is essential to solve the productivity, quality and safety issues impacting employees along the trajectory or path of the enterprise-wide work process. In this study, the symptoms associated with human performance issues in one production department work process had root causes originating in the customer service department work process. In fact, the issues found in the customer service department caused performance problems elsewhere in the enterprise-wide work process such as the traffic department. Sustainable enterprise solutions for workplace human performance require the integration of macro- and micro-ergonomic approaches.

Evaluation of TRMM 3B42V7 product on extreme precipitation measurements over peninsular Malaysia

NASA Astrophysics Data System (ADS)

Paska, Jacquoelyne; Lau, Alvin M. S.; Tan, Mou Leong; Tan, Kok Chooi

2017-10-01

Climate variability has become a matter worth our attention as this issue has unveiled to the extreme water-related disasters such as flood and drought. Increments in heavy precipitation have happened over the past century and future climate scenarios show that it may alter the recurrence, timing, force, and length of these occasions. Satellite precipitation products (SPPs) could be used as representation of precipitation over a large region. This could be useful for the monitoring of the precipitation pattern as well as extreme events. Nevertheless, application of these products in monitoring extreme precipitation is still limited because insufficiency of quality assessment. This study aims to evaluate the performance of the Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA) 3B42V7 product in capturing the behavior of extreme precipitation events over Peninsular Malaysia from 2000 to 2015. Four extreme precipitation indices, in two general categories of absolute threshold (R10mm, R20mm and R50mm) and maximum (Rx1d) indices that recommended by the Expert Team on Climate Change Detection and Indices (ETCCDI) were used. General evaluation has shown that the TRMM 3B42V7 product performed good on the measurements of monthly and annual precipitation. In the respect of extreme precipitation measurements, weak to moderate positive correlations were found between the TRMM 3B42 product and rain gauges over Peninsular Malaysia. The TRMM 3B42V7 product overestimated the R10mm and R20mm indices, while an underestimation was found for the R50mm and Rx1d indices.

A consideration of the operation of automatic production machines.

PubMed

Hoshi, Toshiro; Sugimoto, Noboru

2015-01-01

At worksites, various automatic production machines are in use to release workers from muscular labor or labor in the detrimental environment. On the other hand, a large number of industrial accidents have been caused by automatic production machines. In view of this, this paper considers the operation of automatic production machines from the viewpoint of accident prevention, and points out two types of machine operation - operation for which quick performance is required (operation that is not permitted to be delayed) - and operation for which composed performance is required (operation that is not permitted to be performed in haste). These operations are distinguished by operation buttons of suitable colors and shapes. This paper shows that these characteristics are evaluated as "asymmetric on the time-axis". Here, in order for workers to accept the risk of automatic production machines, it is preconditioned in general that harm should be sufficiently small or avoidance of harm is easy. In this connection, this paper shows the possibility of facilitating the acceptance of the risk of automatic production machines by enhancing the asymmetric on the time-axis.

A consideration of the operation of automatic production machines

PubMed Central

HOSHI, Toshiro; SUGIMOTO, Noboru

2015-01-01

At worksites, various automatic production machines are in use to release workers from muscular labor or labor in the detrimental environment. On the other hand, a large number of industrial accidents have been caused by automatic production machines. In view of this, this paper considers the operation of automatic production machines from the viewpoint of accident prevention, and points out two types of machine operation − operation for which quick performance is required (operation that is not permitted to be delayed) − and operation for which composed performance is required (operation that is not permitted to be performed in haste). These operations are distinguished by operation buttons of suitable colors and shapes. This paper shows that these characteristics are evaluated as “asymmetric on the time-axis”. Here, in order for workers to accept the risk of automatic production machines, it is preconditioned in general that harm should be sufficiently small or avoidance of harm is easy. In this connection, this paper shows the possibility of facilitating the acceptance of the risk of automatic production machines by enhancing the asymmetric on the time-axis. PMID:25739898

Water-food-energy nexus index: analysis of water-energy-food nexus of crop's production system applying the indicators approach

NASA Astrophysics Data System (ADS)

El-Gafy, Inas

2017-10-01

Analysis the water-food-energy nexus is the first step to assess the decision maker in developing and evaluating national strategies that take into account the nexus. The main objective of the current research is providing a method for the decision makers to analysis the water-food-energy nexus of the crop production system at the national level and carrying out a quantitative assessment of it. Through the proposed method, indicators considering the water and energy consumption, mass productivity, and economic productivity were suggested. Based on these indicators a water-food-energy nexus index (WFENI) was performed. The study showed that the calculated WFENI of the Egyptian summer crops have scores that range from 0.21 to 0.79. Comparing to onion (the highest scoring WFENI,i.e., the best score), rice has the lowest WFENI among the summer food crops. Analysis of the water-food-energy nexus of forty-two Egyptian crops in year 2010 was caried out (energy consumed for irrigation represent 7.4% of the total energy footprint). WFENI can be applied to developed strategies for the optimal cropping pattern that minimizing the water and energy consumption and maximizing their productivity. It can be applied as a holistic tool to evaluate the progress in the water and agricultural national strategies. Moreover, WFENI could be applied yearly to evaluate the performance of the water-food-energy nexus managmant.

Employee wellness program evaluation.

DOT National Transportation Integrated Search

2008-12-01

Well-designed wellness programs can keep healthy employees healthy, support employees with : health risks to improve their health behaviors, and facilitate organizational efforts to achieve : workforce performance goals. : Productivity lost through a...

Evaluation and validation of a multi-residue method based on biochip technology for the simultaneous screening of six families of antibiotics in muscle and aquaculture products.

PubMed

Gaudin, Valérie; Hedou, Celine; Soumet, Christophe; Verdon, Eric

2016-01-01

The Evidence Investigator™ system (Randox, UK) is a biochip and semi-automated system. The microarray kit II (AM II) is capable of detecting several compounds belonging to different families of antibiotics: quinolones, ceftiofur, thiamphenicol, streptomycin, tylosin and tetracyclines. The performance of this innovative system was evaluated for the detection of antibiotic residues in new matrices, in muscle of different animal species and in aquaculture products. The method was validated according to the European Decision No. EC/2002/657 and the European guideline for the validation of screening methods, which represents a complete initial validation. The false-positive rate was equal to 0% in muscle and in aquaculture products. The detection capabilities CCβ for 12 validated antibiotics (enrofloxacin, difloxacin, ceftiofur, desfuroyl ceftiofur cysteine disulfide, thiamphenicol, florfenicol, tylosin, tilmicosin, streptomycin, dihydrostreptomycin, tetracycline, doxycycline) were all lower than the respective maximum residue limits (MRLs) in muscle from different animal origins (bovine, ovine, porcine, poultry). No cross-reactions were observed with other antibiotics, neither with the six detected families nor with other families of antibiotics. The AM II kit could be applied to aquaculture products but with higher detection capabilities from those in muscle. The detection capabilities CCβ in aquaculture products were respectively at 0.25, 0.10 and 0.5 of the respective MRL in aquaculture products for enrofloxacin, tylosin and oxytetracycline. The performance of the AM II kit has been compared with other screening methods and with the performance characteristics previously determined in honey.

Environmental performance evaluation and strategy management using balanced scorecard.

PubMed

Hsu, Yu-Lung; Liu, Chun-Chu

2010-11-01

Recently, environmental protection and regulations such as WEEE, ELV, and RoHS are rapidly emerging as an important issue for business to consider. The trend of swinging from end-of-pipe control to product design, green innovation, and even the establishment of image or brand has affected corporations in almost every corner in the world, and enlarged to the all modern global production network. Corporations must take proactive environmental strategies to response the challenges. This study adopts balanced scorecard structure and aim at automobile industries to understand the relationships of internal and external, financial and non-financial, and outcome and driving factors. Further relying on these relationships to draw the "map of environment strategy" to probe and understand the feasibility of environmental performance evaluation and environmental strategy control.

Analytical methods development for supramolecular design in solar hydrogen production

NASA Astrophysics Data System (ADS)

Brown, J. R.; Elvington, M.; Mongelli, M. T.; Zigler, D. F.; Brewer, K. J.

2006-08-01

In the investigation of alternative energy sources, specifically, solar hydrogen production from water, the ability to perform experiments with a consistent and reproducible light source is key to meaningful photochemistry. The design, construction, and evaluation of a series of LED array photolysis systems for high throughput photochemistry have been performed. Three array systems of increasing sophistication are evaluated using calorimetric measurements and potassium tris(oxalato)ferrate(II) chemical actinometry and compared with a traditional 1000 W Xe arc lamp source. The results are analyzed using descriptive statistics and analysis of variance (ANOVA). The third generation array is modular, and controllable in design. Furthermore, the third generation array system is shown to be comparable in both precision and photonic output to a 1000 W Xe arc lamp.

Environmental factors that influence milk production of Pantaneiro ewes and the weight gain of their lambs during the pre-weaning period.

PubMed

Longo, M L; Vargas Junior, F M; Cansian, K; Souza, M R; Burim, P C; Silva, A L A; Costa, C M; Seno, L O

2018-04-14

The main objective of this research was to conduct an exploratory study of the lactation curve in order to characterize the productive potential of Pantaneiro ewes and lambs. Fifty ewes were bred using four rams in two different mating seasons. The ewes were kept with their lambs on pasture of Brachiaria brizantha. Ewe body score, ewe weight, and lamb weight were evaluated. Milk sampling was performed every week. In the morning for milk collections, the ewes were treated with 1 UI of oxytocin (intramuscular) for complete milking. Lambs were separated from the ewes for 4 h and milk collections were performed. The total milk production over 24 h was estimated by multiplying the production of this period (4 h) by 6. The data were analyzed using the MIXED procedure (P < 0.05) in SAS. Milk production data were fitted to the curve using the incomplete gamma function of Wood, and lamb growth data were fitted using the Gompertiz equation. The average milk production of the ewes was 1.03 kg/day -1 . Younger ewes had the lowest milk production (18 = 798 ± 330, 24 = 1001 ± 440, 36 = 1100 ± 490, and 48 = 1106 ± 490 g/day -1 ). Ewe body score at lambing affected initial milk production (1.0 = 816 ± 660, 1.5 = 1089 ± 105, and 2.0 = 1424 ± 1600 g/day -1 ). Lambs were weaned with an average weight of 20.3 kg. Daily weight gain from birth to weaning was 181 g. Locally adapted Pantaneiro ewes showed a linear decreasing lactation curve, with reduced production from the second week of lactation. Overall, evaluation of the dairy production and lamb performance revealed great variation, denoting potential for selection.

Identification and Analysis of Labor Productivity Components Based on ACHIEVE Model (Case Study: Staff of Kermanshah University of Medical Sciences)

PubMed Central

Ziapour, Arash; Khatony, Alireza; Kianipour, Neda; Jafary, Faranak

2015-01-01

Identification and analysis of the components of labor productivity based on ACHIEVE model was performed among employees in different parts of Kermanshah University of Medical Sciences in 2014. This was a descriptive correlational study in which the population consisted of 270 working personnel in different administrative groups (contractual, fixed- term and regular) at Kermanshah University of Medical Sciences (872 people) that were selected among 872 people through stratified random sampling method based on Krejcie and Morgan sampling table. The survey tool included labor productivity questionnaire of ACHIEVE. Questionnaires were confirmed in terms of content and face validity, and their reliability was calculated using Cronbach’s alpha coefficient. The data were analyzed by SPSS-18 software using descriptive and inferential statistics. The mean scores for labor productivity dimensions of the employees, including environment (environmental fit), evaluation (training and performance feedback), validity (valid and legal exercise of personnel), incentive (motivation or desire), help (organizational support), clarity (role perception or understanding), ability (knowledge and skills) variables and total labor productivity were 4.10±0.630, 3.99±0.568, 3.97±0.607, 3.76±0.701, 3.63±0.746, 3.59±0.777, 3.49±0.882 and 26.54±4.347, respectively. Also, the results indicated that the seven factors of environment, performance assessment, validity, motivation, organizational support, clarity, and ability were effective in increasing labor productivity. The analysis of the current status of university staff in the employees’ viewpoint suggested that the two factors of environment and evaluation, which had the greatest impact on labor productivity in the viewpoint of the staff, were in a favorable condition and needed to be further taken into consideration by authorities. PMID:25560364

Identification and analysis of labor productivity components based on ACHIEVE model (case study: staff of Kermanshah University of Medical Sciences).

PubMed

Ziapour, Arash; Khatony, Alireza; Kianipour, Neda; Jafary, Faranak

2014-12-15

Identification and analysis of the components of labor productivity based on ACHIEVE model was performed among employees in different parts of Kermanshah University of Medical Sciences in 2014. This was a descriptive correlational study in which the population consisted of 270 working personnel in different administrative groups (contractual, fixed- term and regular) at Kermanshah University of Medical Sciences (872 people) that were selected among 872 people through stratified random sampling method based on Krejcie and Morgan sampling table. The survey tool included labor productivity questionnaire of ACHIEVE. Questionnaires were confirmed in terms of content and face validity, and their reliability was calculated using Cronbach's alpha coefficient. The data were analyzed by SPSS-18 software using descriptive and inferential statistics. The mean scores for labor productivity dimensions of the employees, including environment (environmental fit), evaluation (training and performance feedback), validity (valid and legal exercise of personnel), incentive (motivation or desire), help (organizational support), clarity (role perception or understanding), ability (knowledge and skills) variables and total labor productivity were 4.10±0.630, 3.99±0.568, 3.97±0.607, 3.76±0.701, 3.63±0.746, 3.59±0.777, 3.49±0.882 and 26.54±4.347, respectively. Also, the results indicated that the seven factors of environment, performance assessment, validity, motivation, organizational support, clarity, and ability were effective in increasing labor productivity. The analysis of the current status of university staff in the employees' viewpoint suggested that the two factors of environment and evaluation, which had the greatest impact on labor productivity in the viewpoint of the staff, were in a favorable condition and needed to be further taken into consideration by authorities.

Effects of fixed labial orthodontic appliances on speech sound production.

PubMed

Paley, Jonathan S; Cisneros, George J; Nicolay, Olivier F; LeBlanc, Etoile M

2016-05-01

To explore the impact of fixed labial orthodontic appliances on speech sound production. Speech evaluations were performed on 23 patients with fixed labial appliances. Evaluations were performed immediately prior to appliance insertion, immediately following insertion, and 1 and 2 months post insertion. Baseline dental/skeletal variables were correlated with the ability to accommodate the presence of the appliances. Appliance effects were variable: 44% of the subjects were unaffected, 39% were temporarily affected but adapted within 2 months, and 17% of patients showed persistent sound errors at 2 months. Resolution of acquired sound errors was noted by 8 months post-appliance removal. Maladaptation to appliances was correlated to severity of malocclusion as determined by the Grainger's Treatment Priority Index. Sibilant sounds, most notably /s/, were affected most often. (1) Insertion of fixed labial appliances has an effect on speech sound production. (2) Sibilant and stopped sounds are affected, with /s/ being affected most often. (3) Accommodation to fixed appliances depends on the severity of malocclusion.

Numerical simulation of vortex pyrolysis reactors for condensable tar production from biomass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, R.S.; Bellan, J.

1998-08-01

A numerical study is performed in order to evaluate the performance and optimal operating conditions of vortex pyrolysis reactors used for condensable tar production from biomass. A detailed mathematical model of porous biomass particle pyrolysis is coupled with a compressible Reynolds stress transport model for the turbulent reactor swirling flow. An initial evaluation of particle dimensionality effects is made through comparisons of single- (1D) and multi-dimensional particle simulations and reveals that the 1D particle model results in conservative estimates for total pyrolysis conversion times and tar collection. The observed deviations are due predominantly to geometry effects while directional effects frommore » thermal conductivity and permeability variations are relatively small. Rapid ablative particle heating rates are attributed to a mechanical fragmentation of the biomass particles that is modeled using a critical porosity for matrix breakup. Optimal thermal conditions for tar production are observed for 900 K. Effects of biomass identity, particle size distribution, and reactor geometry and scale are discussed.« less

ATAD control goals through the analysis of process variables and evaluation of quality, production and cost.

PubMed

Nájera, S; Gil-Martínez, M; Zambrano, J A

2015-01-01

The aim of this paper is to establish and quantify different operational goals and control strategies in autothermal thermophilic aerobic digestion (ATAD). This technology appears as an alternative to conventional sludge digestion systems. During the batch-mode reaction, high temperatures promote sludge stabilization and pasteurization. The digester temperature is usually the only online, robust, measurable variable. The average temperature can be regulated by manipulating both the air injection and the sludge retention time. An improved performance of diverse biochemical variables can be achieved through proper manipulation of these inputs. However, a better quality of treated sludge usually implies major operating costs or a lower production rate. Thus, quality, production and cost indices are defined to quantify the outcomes of the treatment. Based on these, tradeoff control strategies are proposed and illustrated through some examples. This paper's results are relevant to guide plant operators, to design automatic control systems and to compare or evaluate the control performance on ATAD systems.

SIMS prototype system 1 test results: Engineering analysis

NASA Technical Reports Server (NTRS)

1978-01-01

The space and domestic water solar heating system designated SIMS Prototype Systems 1 was evaluated. The test system used 720 ft (gross) of Solar Energy Products Air Collectors, a Solar Control Corporation SAM 20 Air Handler with Model 75-175 control unit, a Jackson Solar Storage tank with Rho Sigma Mod 106 controller, and 20 tons of rack storage. The test data analysis performed evaluates the system performance and documents the suitability of SIMS Prototype System 1 hardware for field installation.

Field evaluations of topical arthropod repellents in North, Central, and South America.

PubMed

Lawrence, Kendra L; Achee, Nicole L; Bernier, Ulrich R; Mundal, Kirk D; Benante, John Paul

2014-09-01

Recently, vector-borne diseases have been resurging in endemic areas and expanding their geographic range into nonendemic areas. Such changes have refocused attention to the potential for major public health events, as naive populations are exposed to these pathogens. Personal topical repellents, recommended by the United States Centers for Disease Control and Prevention and World Health Organization, remain a first line of protection against infection. The current study evaluated the repellent efficacy of four new U.S. Environmental Protection Agency-registered topical repellent products, two with picaridin as the active ingredient and two with IR3535, against a standard DEET (N,N-diethyl-3-methylbenzamide)-based product. All products were evaluated against a wide range of vector species under field conditions across the Americas. Human volunteers were used to evaluate product efficacy as compared with a well-known DEET-based formulation and determine suitability for use by the U.S. military. Findings demonstrated the new formulations performed as well as the standard U.S. military repellent and could be recommended for use.

Measuring productivity and its relationship to community health worker performance in Uganda: a cross-sectional study.

PubMed

Kozuki, Naoko; Wuliji, Tana

2018-05-09

To explore the nature of the relationship between and factors associated with productivity and performance among the community health volunteer (CHV) cadre (Village Health Teams, VHT) in Busia District, Eastern Uganda. The study was carried out to contribute to the global evidence on strategies to improve CHV productivity and performance. This cross-sectional study was conducted with 140 VHT members as subjects and respondents. Data were collected between March and May 2013 on the performance and productivity of VHT members related to village visits and activities for saving maternal and child lives, as well as on independent factors that may be associated with these measures. Data were collected through direct observation of VHT activities, structured interviews with VHTs, and review of available records. The correlation between performance and productivity scores was estimated, and LASSO regression analyses were conducted to identify factors associated with these two scores independently. VHTs demonstrated wide variation in productivity measures, conducting a median of 13.2 service units in a three-month span (range: 2.0-114.9). Performance of the studied VHTs was generally high, with a median performance score (out of 100) of 96.4 (range: 50.9-100.0). We observed a weak correlation coefficient of 0.05 (p = 0.57) between productivity and performance scores. Older VHT age (≥50 years old, reference: <50 years old) (11.14, 95% CI: 3.26-19.01) and knowledge of danger signs (in units of ten-percentage points, 1.92, 95% CI: 0.01-3.83) were positively associated with productivity scores. Job satisfaction (1.46, 95% CI: 0.13-2.80) and knowledge of danger signs (in units of ten-percentage points, 1.02, 95% CI: 0.05-1.98) were positively associated with performance scores. Older VHT age and knowledge of danger signs were positively associated with productivity, and job satisfaction and knowledge of danger signs were positively associated with performance. No correlation was observed between productivity and performance scores. This lack of correlation suggests that interventions to improve CHV effectiveness may affect the two dimensions of effectiveness differently. We recommend that productivity and performance both be monitored to evaluate the overall impact of interventions to increase CHV effectiveness.

Testing of optical components to assure performance in a high-average-power environment

NASA Astrophysics Data System (ADS)

Chow, Robert; Taylor, John R.; Eickelberg, William K.; Primdahl, Keith A.

1997-11-01

Evaluation and testing of the optical components used in the atomic vapor laser isotope separation plant is critical for qualification of suppliers, developments of new optical multilayer designs and manufacturing processes, and assurance of performance in the production cycle. The range of specifications requires development of specialized test equipment and methods which are not routine or readily available in industry. Specifications are given on material characteristics such as index homogeneity, subsurface damage left after polishing, microscopic surface defects and contamination, coating absorption, and high average power laser damage. The approach to testing these performance characteristics and assuring the quality throughout the production cycle is described.

Umatilla Hatchery Monitoring and Evaluation, 1998-1999 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stonecypher, R. Wess; Groberg, Jr., Warren J.; Farman, Brett M.

2001-07-01

The Northwest Power Planning Council's Columbia River Basin Fish and Wildlife Program authorized construction of Umatilla Fish Hatchery (UFH) in 1986. Measure 703 of the program amended the original authorization for the hatchery and specified evaluation of the Michigan (MI) raceways using oxygen supplementation to reach production goals of 290,000 lb of chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss). The hatchery was completed in fall 1991. Partial justification for the hatchery was to evaluate new production and supplementation techniques. MI raceways at UFH increase smolt production with a limited water supply. Test results for MI raceways will have systematicmore » application in the Columbia River basin. The UFH is the foundation for rehabilitating chinook salmon and enhancing steelhead in the Umatilla River (CTUIR and ODFW 1990) and is expected to contribute significantly to the Northwest Power Planning Council's goal of doubling salmon production in the Columbia Basin. Hatchery production goals and a comprehensive monitoring and evaluation plan were presented in the Umatilla Hatchery Master Plan (CTUIR and ODFW 1990). The Comprehensive Plan for Monitoring and Evaluation of Umatilla Hatchery (Carmichael 1990) was approved by the Northwest Power Planning Council as a critical adaptive management guide for fisheries rehabilitation in the Umatilla River. Monitoring and evaluation will be used to increase knowledge about uncertainties inherent in the fisheries rehabilitation and will complement the developing systematic monitoring and evaluation program. The monitoring and evaluation goals are: (1) Provide information and recommendations for the culture and release of hatchery fish, harvest regulations, and natural escapement to accomplish long-term natural and hatchery production goals in the Umatilla River basin that are consistent with provisions of the Council's Columbia River Basin Fish and Wildlife Program. (2) Assess the success of achieving the management objectives in the Umatilla River basin that are presented in the Master Plan and the Comprehensive Rehabilitation Plan. A substantial proportion of the production at UFH is reared in MI raceways. This system has not been thoroughly evaluated to determine the effects on Smolt-to-adult survival (SAS). In addition, the rearing strategies proposed for spring chinook salmon require an unusually extensive period of incubation in chilled well water. Extensive background and justification for UFH monitoring and evaluation is presented in Carmichael (1990). In this report, we present findings for the UFH Monitoring and Evaluation Project from 1 November 1998 to 31 October 1999. We designed our program to evaluate fish cultural practices, conduct rearing and survival studies, assess sport fisheries, and provide information for planning and coordination. Additional studies have been designed for fall chinook salmon to evaluate straying and the effects of tagging. We monitored the culture and performance of more than 3.2 million chinook salmon and steelhead produced at UFH in 1997-98 (Appendix Tables A1-8). Individual stock profiles, release, performance, and return data of previously released groups are presented in the following sections.« less

Handwriting features of children with developmental coordination disorder--results of triangular evaluation.

PubMed

Rosenblum, Sara; Margieh, Jumana Aassy; Engel-Yeger, Batya

2013-11-01

Developmental coordination disorders (DCD) is one of the most common disorders affecting school-aged children. The study aimed to characterize the handwriting performance of children with DCD who write in Arabic, based on triangular evaluation. Participants included 58 children aged 11-12 years, 29 diagnosed with DCD based on the DSM-IV criteria and the M-ABC, and 29 matched typically developed controls. Children were asked to copy a paragraph on a sheet of paper affixed to a digitizer supplying objective measures of the handwriting process. The handwriting proficiency screening questionnaire (HPSQ) was completed by their teachers while observing their performance and followed by evaluation of their final written product. Results indicated that compared to controls, children with DCD required significantly more on-paper and in-air time per stroke while copying. In addition, global legibility, unrecognizable letters and spatial arrangement measures of their written product were significantly inferior. Significant group differences were also found between the HPSQ subscales scores. Furthermore, 82.8% of all participants were correctly classified into groups based on one discriminate function which included two handwriting performance measures. These study results strongly propose application of triangular standardized evaluation to receive better insight of handwriting deficit features of individual children with DCD who write in Arabic. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Joint Agency Commercial Imagery Evaluation Team and Product Characterization Approach

NASA Technical Reports Server (NTRS)

Zanoni, Vicki; Pagnutti, Mary; Ryan, Robert E.; Snyder, Greg; Lehman, William; Roylance, Spencer

2003-01-01

The Joint Agency Commercial Imagery Evaluation (JACIE) team is a collaborative interagency group focused on the characterization of commercial remote sensing data products. The team members - the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA), and the U.S. Geological Survey (USGS) - each have a vested interest in the purchase and use of commercial imagery to support government research and operational applications. For both research and applications, commercial products must be well characterized for precision, accuracy, and repeatability. Since commercial systems are built and operated with no government insight or oversight, the JACIE team provides an independent product characterization of delivered image and image-derived end products. End product characterization differs from the systems calibration approach that is typically used with government systems, where detailed system design information is available. The product characterization approach addresses three primary areas of product performance: geopositional accuracy, image quality, and radiometric accuracy. The JACIE team utilizes well-characterized test sites to support characterization activities. To characterize geopositional accuracy, the team utilizes sites containing several "photo-identifiable" targets and compares their precisely known locations with those defined by the commercial image product. In the area of image quality, spatial response is characterized using edge targets and pulse targets to measure edge response and to estimate image modulation transfer function. Additionally, imagery is also characterized using the National Imagery Interpretability Rating Scale, a means of quantifying the ability to identify certain targets (e.g., rail-cars, airplanes) within an image product. Radiometric accuracy is characterized using reflectance-based vicarious calibration methods at several uniform sites. Each JACIE agency performs an aspect of product characterization based on its area of expertise, thus minimizing duplication of effort. The JACIE team collaborated to perform comprehensive characterization of products from Space Imaging Inc.'s IKONOS satellite and from DigitalGlobe's QuickBird satellite and is currently characterizing products from OrbImage s OrbView-3. JACIE assessments have resulted in several improvements to commercial image product quality and have enhanced working relationships between government and industry. Assessment results are presented at an annual JACIE High Spatial Resolution Commercial Imagery Workshop.

Recycling production designs: the value of coordination and flexibility in aluminum recycling operations

NASA Astrophysics Data System (ADS)

Brommer, Tracey H.

The growing motivation for aluminum recycling has prompted interest in recycling alternative and more challenging secondary materials. The nature of these alternative secondary materials necessitates the development of an intermediate recycling facility that can reprocess the secondary materials into a liquid product Two downstream aluminum remelters will incorporate the liquid products into their aluminum alloy production schedules. Energy and environmental benefits result from delivering the products as liquid but coordination challenges persist because of the energy cost to maintain the liquid. Further coordination challenges result from the necessity to establish a long term recycling production plan in the presence of long term downstream aluminum remelter production uncertainty and inherent variation in the daily order schedule of the downstream aluminum remelters. In this context a fundamental question arises, considering the metallurgical complexities of dross reprocessing, what is the value of operating a coordinated set of by-product reprocessing plants and remelting cast houses? A methodology is presented to calculate the optimal recycling center production parameters including 1) the number of recycled products, 2) the volume of recycled products, 3) allocation of recycled materials across recycled products, 4) allocation of recycled products across finished alloys, 4) the level of flexibility for the recycling center to operate. The methods implemented include, 1) an optimization model to describe the long term operations of the recycling center, 2) an uncertainty simulation tool, 3) a simulation optimization method, 4) a dynamic simulation tool with four embedded daily production optimization models of varying degrees of flexibility. This methodology is used to quantify the performance of several recycling center production designs of varying levels of coordination and flexibility. This analysis allowed the identification of the optimal recycling center production design based on maximizing liquid recycled product incorporation and minimizing cast sows. The long term production optimization model was used to evaluate the theoretical viability of the proposed two stage scrap and aluminum dross reprocessing operation including the impact of reducing coordination on model performance. Reducing the coordination between the recycling center and downstream remelters by reducing the number of recycled products from ten to five resulted in only 1.3% less secondary materials incorporated into downstream production. The dynamic simulation tool was used to evaluate the performance of the calculated recycling center production plan when resolved on a daily timeframe for varying levels of operational flexibility. The dynamic simulation revealed the optimal performance corresponded to the fixed recipe with flexible production daily optimization model formulation. Calculating recycled product characteristics using the proposed simulation optimization method increased profitability in cases of uncertain downstream remelter production and expensive aluminum dross and post-consumed secondary materials. (Copies available exclusively from MIT Libraries, libraries.mit.edu/docs - docs@mit.edu)

Main Reasons for Registration Application Refusal of Generic and Similar Pharmaceutical Drug Products by the Brazilian Health Regulatory Agency (ANVISA).

PubMed

do Carmo, Ana Cerúlia Moraes; Piras, Stefânia Schimaneski; Rocha, Nayrton Flávio Moura; Gratieri, Tais

2017-01-01

Objective . The marketing authorization of generic and similar pharmaceutical drug products involves the analysis of proposing company's administrative aspects as well as drug product technical description and scientific evaluations. This study evaluated the main reasons for registration refusal of generic and similar pharmaceutical drug products in Brazil. The aim is to help future applicants to better organize the proposal. Methods . A retrospective search of drug products registration processes was performed on the Brazilian Government Official Gazette from January 1, 2015, and December 31, 2015. Results . Drug product quality control, drug product stability study, deadline accomplishment, API quality control made by drug manufacturer, active pharmaceutical ingredient (API), and production report were the main reasons for marketing authorization application refusal of generic and similar pharmaceutical drug products in 2015. Conclusion . Disclosure of the reasons behind failed applications is a step forward on regulatory transparency. Sharing of experiences is essential to international regulatory authorities and organizations to improve legislation requirements for the marketing authorization of generic and similar pharmaceutical drug products.

Main Reasons for Registration Application Refusal of Generic and Similar Pharmaceutical Drug Products by the Brazilian Health Regulatory Agency (ANVISA)

PubMed Central

do Carmo, Ana Cerúlia Moraes; Piras, Stefânia Schimaneski; Rocha, Nayrton Flávio Moura

2017-01-01

Objective. The marketing authorization of generic and similar pharmaceutical drug products involves the analysis of proposing company's administrative aspects as well as drug product technical description and scientific evaluations. This study evaluated the main reasons for registration refusal of generic and similar pharmaceutical drug products in Brazil. The aim is to help future applicants to better organize the proposal. Methods. A retrospective search of drug products registration processes was performed on the Brazilian Government Official Gazette from January 1, 2015, and December 31, 2015. Results. Drug product quality control, drug product stability study, deadline accomplishment, API quality control made by drug manufacturer, active pharmaceutical ingredient (API), and production report were the main reasons for marketing authorization application refusal of generic and similar pharmaceutical drug products in 2015. Conclusion. Disclosure of the reasons behind failed applications is a step forward on regulatory transparency. Sharing of experiences is essential to international regulatory authorities and organizations to improve legislation requirements for the marketing authorization of generic and similar pharmaceutical drug products. PMID:28280742

A novel integrated assessment methodology of urban water reuse.

PubMed

Listowski, A; Ngo, H H; Guo, W S; Vigneswaran, S

2011-01-01

Wastewater is no longer considered a waste product and water reuse needs to play a stronger part in securing urban water supply. Although treatment technologies for water reclamation have significantly improved the question that deserves further analysis is, how selection of a particular wastewater treatment technology relates to performance and sustainability? The proposed assessment model integrates; (i) technology, characterised by selected quantity and quality performance parameters; (ii) productivity, efficiency and reliability criteria; (iii) quantitative performance indicators; (iv) development of evaluation model. The challenges related to hierarchy and selections of performance indicators have been resolved through the case study analysis. The goal of this study is to validate a new assessment methodology in relation to performance of the microfiltration (MF) technology, a key element of the treatment process. Specific performance data and measurements were obtained at specific Control and Data Acquisition Points (CP) to satisfy the input-output inventory in relation to water resources, products, material flows, energy requirements, chemicals use, etc. Performance assessment process contains analysis and necessary linking across important parametric functions leading to reliable outcomes and results.

Vaccine stability study design and analysis to support product licensure.

PubMed

Schofield, Timothy L

2009-11-01

Stability evaluation supporting vaccine licensure includes studies of bulk intermediates as well as final container product. Long-term and accelerated studies are performed to support shelf life and to determine release limits for the vaccine. Vaccine shelf life is best determined utilizing a formal statistical evaluation outlined in the ICH guidelines, while minimum release is calculated to help assure adequate potency through handling and storage of the vaccine. In addition to supporting release potency determination, accelerated stability studies may be used to support a strategy to recalculate product expiry after an unintended temperature excursion such as a cold storage unit failure or mishandling during transport. Appropriate statistical evaluation of vaccine stability data promotes strategic stability study design, in order to reduce the uncertainty associated with the determination of the degradation rate, and the associated risk to the customer.

Evaluating the chronic effects of nitrate on the health and performance of post-smolt Atlantic salmon Salmo salar in freshwater recirculation aquaculture systems

USDA-ARS?s Scientific Manuscript database

Commercial production of Atlantic salmon smolts, post-smolts, and market-size fish using land-based recirculation aquaculture systems (RAS) is expanding. RAS generally provide a nutrient-rich environment in which nitrate accumulates as an end-product of nitrification. An 8-month study was conducted ...

Reaction-to-fire testing and modeling for wood products

Treesearch

Mark A. Dietenberger; Robert H. White

2001-01-01

In this review we primarily discuss our use of the oxygen consumption calorimeter (ASTM E1354 for cone calorimeter and ISO9705 for room/corner tests) and fire growth modeling to evaluate treated wood products. With recent development towards performance-based building codes, new methodology requires engineering calculations of various fire growth scenarios. The initial...

CALiPER Special Summary Report: Retail Replacement Lamp Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-04-01

CALiPER testing has evaluated many products for commercial lighting markets and found some excellent performers. However, many of these are not available on the retail market. This special testing was undertaken to identify and test solid-state lighting (SSL) replacement lamp products that are available to the general public through retail stores and websites.

Re-Engaging Marginalized Youth through Digital Music Production: Performance, Audience and Evaluation

ERIC Educational Resources Information Center

Brader, Andy; Luke, Allan

2013-01-01

This article presents two case studies of marginalized youth experimenting with digital music production in flexible education settings. The cases were drawn from a 3-year study of alternative assessment in flexible learning centres for youth who have left formal schooling in Queensland, Australia. The educational issues are framed by reference to…

A comprehensive evaluation of two MODIS evapotranspiration products over the conterminous United States: using point and gridded FLUXNET and water balance ET

USGS Publications Warehouse

Velpuri, Naga M.; Senay, Gabriel B.; Singh, Ramesh K.; Bohms, Stefanie; Verdin, James P.

2013-01-01

Remote sensing datasets are increasingly being used to provide spatially explicit large scale evapotranspiration (ET) estimates. Extensive evaluation of such large scale estimates is necessary before they can be used in various applications. In this study, two monthly MODIS 1 km ET products, MODIS global ET (MOD16) and Operational Simplified Surface Energy Balance (SSEBop) ET, are validated over the conterminous United States at both point and basin scales. Point scale validation was performed using eddy covariance FLUXNET ET (FLET) data (2001–2007) aggregated by year, land cover, elevation and climate zone. Basin scale validation was performed using annual gridded FLUXNET ET (GFET) and annual basin water balance ET (WBET) data aggregated by various hydrologic unit code (HUC) levels. Point scale validation using monthly data aggregated by years revealed that the MOD16 ET and SSEBop ET products showed overall comparable annual accuracies. For most land cover types, both ET products showed comparable results. However, SSEBop showed higher performance for Grassland and Forest classes; MOD16 showed improved performance in the Woody Savanna class. Accuracy of both the ET products was also found to be comparable over different climate zones. However, SSEBop data showed higher skill score across the climate zones covering the western United States. Validation results at different HUC levels over 2000–2011 using GFET as a reference indicate higher accuracies for MOD16 ET data. MOD16, SSEBop and GFET data were validated against WBET (2000–2009), and results indicate that both MOD16 and SSEBop ET matched the accuracies of the global GFET dataset at different HUC levels. Our results indicate that both MODIS ET products effectively reproduced basin scale ET response (up to 25% uncertainty) compared to CONUS-wide point-based ET response (up to 50–60% uncertainty) illustrating the reliability of MODIS ET products for basin-scale ET estimation. Results from this research would guide the additional parameter refinement required for the MOD16 and SSEBop algorithms in order to further improve their accuracy and performance for agro-hydrologic applications.

GATEWAY Demonstrations: OLED Lighting in the Offices of DeJoy, Knauf & Blood, LLP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Naomi J.

At the offices of the accounting firm of DeJoy, Knauf & Blood, LLP in Rochester, NY, the GATEWAY program evaluated a new lighting system that incorporates a number of different OLED luminaires. Evaluation of the OLED products included efficacy performance, field measurements of panel color, flicker measurements, and staff feedback.

Evaluation of short-rotation woody crops to stabilize a decommissioned swine lagoon

Treesearch

K.C. Dipesh; Rodney E. Will; Thomas C. Hennessey; Chad J. Penn

2012-01-01

Fast growing tree stands represent an environmentally friendly, less expensive method for stabilization of decommissioned animal production lagoons than traditional lagoon closure. We tested the feasibility of using short-rotation woody crops (SRWCs) in central Oklahoma to close a decommissioned swine lagoon by evaluating the growth performance and nutrient uptake of...

Simulating forage crop production in a northern climate with the Integrated Farm System Model

USDA-ARS?s Scientific Manuscript database

Whole-farm simulation models are useful tools for evaluating the effect of management practices and climate variability on the agro-environmental and economic performance of farms. A few process-based farm-scale models have been developed, but none have been evaluated in a northern region with a sho...

9 CFR 303.2 - Experimentation: Intensity of inspection coverage.

Code of Federal Regulations, 2010 CFR

2010-01-01

... products and protection of the health and welfare of consumers. In order to test procedures for use in... in paragraph (a) of this section shall be made by the program and shall reflect evaluations of the... the evaluation of the performance of such establishment described in paragraph (b)(1) indicates that...

Woody biomass pretreatment for cellulosic ethanol production : technology and energy consumption evaluation

Treesearch

Junyong Zhu; X.J. Pan

2010-01-01

This review presents a comprehensive discussion of the key technical issues in woody biomass pretreatment: barriers to efficient cellulose saccharification, pretreatment energy consumption, in particular energy consumed for wood-size reduction, and criteria to evaluate the performance of a pretreatment. A post-chemical pretreatment size-reduction approach is proposed...

Using a fuzzy comprehensive evaluation method to determine product usability: A test case

PubMed Central

Zhou, Ronggang; Chan, Alan H. S.

2016-01-01

BACKGROUND: In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. OBJECTIVE AND METHODS: In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. RESULTS AND CONCLUSIONS: This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method. PMID:28035942

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

PubMed

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

Regulating the economic evaluation of pharmaceuticals and medical devices: a European perspective.

PubMed

Cookson, Richard; Hutton, John

2003-02-01

Throughout the developed world, economic evaluation of costly new pharmaceuticals and medical devices became increasingly widespread and systematic during the 1990s. However, serious concerns remain about the validity and relevance of this economic evidence, and about the transparency and accountability of its use in public sector reimbursement decisions. In this article, we summarise current concerns in Europe, based on interviews with European health economists from industry, universities, research institutes and consulting firms. We identify five challenges for European policy-makers, and conclude that there is considerable scope for improving decision-making without damaging incentives to innovate. The challenges are: (1). full publication of the economic evidence used in reimbursement decisions; (2). the redesign of licensing laws to improve the relevance of economic data available at product launch; (3). harmonisation of economic evaluation methodologies; (4). development of methodologies for evaluation of health inequality impacts; and (5). negotiation of price-performance deals to facilitate the use of economic evidence in post-launch pricing review decisions, as information is gathered from studies of product performance in routine use.

Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

PubMed

Chen, Wenhao; Holden, Nicholas M

2018-02-15

The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

Emergy assessment of three home courtyard agriculture production systems in Tibet Autonomous Region, China*

PubMed Central

Guan, Fa-chun; Sha, Zhi-peng; Zhang, Yu-yang; Wang, Jun-feng; Wang, Chao

2016-01-01

Home courtyard agriculture is an important model of agricultural production on the Tibetan plateau. Because of the sensitive and fragile plateau environment, it needs to have optimal performance characteristics, including high sustainability, low environmental pressure, and high economic benefit. Emergy analysis is a promising tool for evaluation of the environmental-economic performance of these production systems. In this study, emergy analysis was used to evaluate three courtyard agricultural production models: Raising Geese in Corn Fields (RGICF), Conventional Corn Planting (CCP), and Pea-Wheat Rotation (PWR). The results showed that the RGICF model produced greater economic benefits, and had higher sustainability, lower environmental pressure, and higher product safety than the CCP and PWR models. The emergy yield ratio (EYR) and emergy self-support ratio (ESR) of RGICF were 0.66 and 0.11, respectively, lower than those of the CCP production model, and 0.99 and 0.08, respectively, lower than those of the PWR production model. The impact of RGICF (1.45) on the environment was lower than that of CCP (2.26) and PWR (2.46). The emergy sustainable indices (ESIs) of RGICF were 1.07 and 1.02 times higher than those of CCP and PWR, respectively. With regard to the emergy index of product safety (EIPS), RGICF had a higher safety index than those of CCP and PWR. Overall, our results suggest that the RGICF model is advantageous and provides higher environmental benefits than the CCP and PWR systems. PMID:27487808

Emergy assessment of three home courtyard agriculture production systems in Tibet Autonomous Region, China.

PubMed

Guan, Fa-Chun; Sha, Zhi-Peng; Zhang, Yu-Yang; Wang, Jun-Feng; Wang, Chao

2016-08-01

Home courtyard agriculture is an important model of agricultural production on the Tibetan plateau. Because of the sensitive and fragile plateau environment, it needs to have optimal performance characteristics, including high sustainability, low environmental pressure, and high economic benefit. Emergy analysis is a promising tool for evaluation of the environmental-economic performance of these production systems. In this study, emergy analysis was used to evaluate three courtyard agricultural production models: Raising Geese in Corn Fields (RGICF), Conventional Corn Planting (CCP), and Pea-Wheat Rotation (PWR). The results showed that the RGICF model produced greater economic benefits, and had higher sustainability, lower environmental pressure, and higher product safety than the CCP and PWR models. The emergy yield ratio (EYR) and emergy self-support ratio (ESR) of RGICF were 0.66 and 0.11, respectively, lower than those of the CCP production model, and 0.99 and 0.08, respectively, lower than those of the PWR production model. The impact of RGICF (1.45) on the environment was lower than that of CCP (2.26) and PWR (2.46). The emergy sustainable indices (ESIs) of RGICF were 1.07 and 1.02 times higher than those of CCP and PWR, respectively. With regard to the emergy index of product safety (EIPS), RGICF had a higher safety index than those of CCP and PWR. Overall, our results suggest that the RGICF model is advantageous and provides higher environmental benefits than the CCP and PWR systems.

Associations of elevated nonesterified fatty acids and beta-hydroxybutyrate concentrations with early lactation reproductive performance and milk production in transition dairy cattle in the northeastern United States.

PubMed

Ospina, P A; Nydam, D V; Stokol, T; Overton, T R

2010-04-01

The objectives were to evaluate the effects of elevated pre- and postpartum nonesterified fatty acids (NEFA) and beta-hydroxybutyrate (BHBA) concentrations during the transition period on reproductive performance and milk production in dairy cattle. In a prospective cohort study of 91 freestall, total mixed ration-fed herds in the northeastern United States, blood samples were collected from approximately 15 prepartum and 15 different postpartum transition animals in each herd. All samples were stratified based on pre- or postpartum status at the time of sample collection, and 2,259 and 2,290 animals were used to evaluate reproductive and milk production performance, respectively. Reproductive performance was assessed by time to conception within 70 d post-voluntary waiting period (VWP) and milk production was assessed using mature-equivalent 305-d (ME305) milk yield estimated at 120 d in milk. While controlling for body condition score (BCS), calving season, median ME305 milk production, and parity, NEFA and BHBA concentrations were evaluated with time to event analysis to investigate reproductive performance. These same predictor variables were used to determine the effects of elevated NEFA and BHBA concentrations on ME305 milk yield with herd as a random effect. Heifers and cows were grouped in the final analyses if the results between groups were similar. In all animals sampled prepartum, the risk of pregnancy within 70 d post-VWP was reduced by 19% when NEFA concentrations were >or=0.27 mEq/L. In all animals sampled postpartum, those with NEFA concentrations >or=0.72 mEq/L had a 16% decrease in risk of pregnancy and those with BHBA concentrations >or=10mg/dL had a 13% decrease in risk. In cows and heifers, ME305 milk yield was decreased by 683 kg when prepartum NEFA concentrations were >or=0.33 mEq/L. In heifers sampled postpartum, ME305 milk yield was increased by 488 kg when NEFA concentrations were >or=0.57 mEq/L and increased by 403 kg when BHBA concentrations were >or=9 mg/dL. In cows sampled postpartum, ME305 milk yield was decreased by 647 kg when NEFA concentrations were >or=0.72 mEq/L and decreased by 393 kg when BHBA concentrations were >or=10mg/dL. With the exception of milk production in heifers, this study indicates that increased concentrations of serum NEFA and BHBA had a detrimental effect on reproductive performance and milk production. Copyright (c) 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Short communication: Effect of on-farm feeding practices on rumen protected lysine products.

PubMed

Ji, P; Tucker, H A; Clark, R E; Miura, M; Ballard, C S

2016-02-01

Two independent studies were conducted to determine whether mechanical mixing of total mixed ration (TMR) or TMR dry matter alters Lys release from 6 rumen-protected Lys (RPL) products (A, B, C, D, E, and F). In the first study, routine mixing procedures were simulated to determine if inclusion of RPL products in TMR altered in situ release of Lys. Following mixing, Dacron bags containing RPL products were ruminally incubated for 0, 6, 12, or 24 h to determine Lys release. The second study occurred independently of the first, in which Lys release from RPL products was evaluated when incorporated into a TMR that differed in dry matter (DM) content. Bags containing TMR and RPL product mixture were stored at room temperature for 0, 6, 18, and 24 h to simulate RPL product exposure to TMR when mixed and delivered once per day. Concentration of free Lys in both studies was determined using ultra-performance liquid chromatography. Following mechanical mixing, ruminal Lys release was significantly greater for C and tended to increase for F. Mechanical mixing did not alter ruminal Lys release from other RPL products evaluated. Hours of ruminal incubation significantly altered Lys release for all products evaluated, and a significant interaction of mechanical mixing and hours of ruminal incubation was observed for A and C. Exposure to lower TMR DM (40.5 versus 51.8%) significantly increased Lys release from B but did not alter Lys release from the other RPL products evaluated. Moreover, time of exposure to TMR significantly increased Lys release from all RPL products evaluated, and a significant interaction of TMR DM and time of exposure to TMR was observed for B and E. These data suggest mechanical mixing and variation in TMR DM may compromise the rumen protection of RPL products; therefore, on-farm feeding practices may alter efficacy of RPL products in dairy rations. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A numerical algorithm with preference statements to evaluate the performance of scientists.

PubMed

Ricker, Martin

Academic evaluation committees have been increasingly receptive for using the number of published indexed articles, as well as citations, to evaluate the performance of scientists. It is, however, impossible to develop a stand-alone, objective numerical algorithm for the evaluation of academic activities, because any evaluation necessarily includes subjective preference statements. In a market, the market prices represent preference statements, but scientists work largely in a non-market context. I propose a numerical algorithm that serves to determine the distribution of reward money in Mexico's evaluation system, which uses relative prices of scientific goods and services as input. The relative prices would be determined by an evaluation committee. In this way, large evaluation systems (like Mexico's Sistema Nacional de Investigadores ) could work semi-automatically, but not arbitrarily or superficially, to determine quantitatively the academic performance of scientists every few years. Data of 73 scientists from the Biology Institute of Mexico's National University are analyzed, and it is shown that the reward assignation and academic priorities depend heavily on those preferences. A maximum number of products or activities to be evaluated is recommended, to encourage quality over quantity.

A Hybrid Fuzzy Model for Lean Product Development Performance Measurement

NASA Astrophysics Data System (ADS)

Osezua Aikhuele, Daniel; Mohd Turan, Faiz

2016-02-01

In the effort for manufacturing companies to meet up with the emerging consumer demands for mass customized products, many are turning to the application of lean in their product development process, and this is gradually moving from being a competitive advantage to a necessity. However, due to lack of clear understanding of the lean performance measurements, many of these companies are unable to implement and fully integrated the lean principle into their product development process. Extensive literature shows that only few studies have focus systematically on the lean product development performance (LPDP) evaluation. In order to fill this gap, the study therefore proposed a novel hybrid model based on Fuzzy Reasoning Approach (FRA), and the extension of Fuzzy-AHP and Fuzzy-TOPSIS methods for the assessment of the LPDP. Unlike the existing methods, the model considers the importance weight of each of the decision makers (Experts) since the performance criteria/attributes are required to be rated, and these experts have different level of expertise. The rating is done using a new fuzzy Likert rating scale (membership-scale) which is designed such that it can address problems resulting from information lost/distortion due to closed-form scaling and the ordinal nature of the existing Likert scale.

Effect of feeding strategy on environmental impacts of pig fattening in different contexts of production: evaluation through life cycle assessment.

PubMed

Monteiro, A N T R; Garcia-Launay, F; Brossard, L; Wilfart, A; Dourmad, J-Y

2016-11-01

Life cycle assessment (LCA) has been used in many studies to evaluate the effect of feeding strategy on the environmental impact of pig production. However, because most studies have been conducted in European conditions, the question of possible interactions with the context of production is still under debate. The objective of this study was to evaluate these effects in 2 contrasted geographic contexts of production, South America (Brazil) and Europe (France). The LCA considered the process of pig fattening, including production and transport of feed ingredients and feed, raising of fattening pigs, and manure storage, transport, and spreading. Impacts were calculated at the farm gate, and the functional unit considered was 1 kg of BW gain over the fattening period. The performances of pigs were simulated for each scenario using the InraPorc population model (2,000 pigs per scenario considering between-animal variability). The LCA calculations were performed for each pig according to its own performance and excretion, and the results were subjected to variance analysis. The results indicate that for some impacts there are clear interactions between the effects of the feeding program, the origin of soybean, and the location of production. For climate change, interest in phase feeding and incorporation of crystalline AA (CAA) is limited and even counterproductive in Brazil with soybeans from the South (without deforestation), whereas they appear to be efficient strategies with soybeans from the Center West (with deforestation), especially in France. Rather similar effects, as those for climate change, were observed for cumulative energy demand. Conversely, potential eutrophication and acidification impacts were reduced by phase feeding and CAA addition in a rather similar way in all situations. Individual daily feeding, the only strategy that took into account between-animal variability, was the most effective approach for reducing the life cycle impact of pig fattening in all situations, whereas the potential of phase feeding programs and CAA was dependent on soybean origin and the geographical context of pig production, in contrast with previous results.

Coastal and Inland Aquatic Data Products for the Hyperspectral Infrared Imager (HyspIRI)

NASA Technical Reports Server (NTRS)

Abelev, Andrei; Babin, Marcel; Bachmann, Charles; Bell, Thomas; Brando, Vittorio; Byrd, Kristin; Dekker , Arnold; Devred, Emmanuel; Forget, Marie-Helene; Goodman, James;

[Evaluation of scientific production in different subareas of Public Health: limits of the current model and contributions to the debate].

PubMed

Iriart, Jorge Alberto Bernstein; Deslandes, Suely Ferreira; Martin, Denise; Camargo, Kenneth Rochel de; Carvalho, Marilia Sá; Coeli, Cláudia Medina

2015-10-01

The aim of this study was to discuss the limits of the quantitative evaluation model for scientific production in Public Health. An analysis of the scientific production of professors from the various subareas of Public Health was performed for 2010-2012. Distributions of the mean annual score for professors were compared according to subareas. The study estimated the likelihood that 60% of the professors in the graduate studies programs scored P50 (Very Good) or higher in their area. Professors of Epidemiology showed a significantly higher median annual score. Graduate studies programs whose faculty included at least 60% of Epidemiology professors and fewer than 10% from the subarea Social and Human Sciences in Health were significantly more likely to achieve a "Very Good" classification. The observed inequalities in scientific production between different subareas of Public Health point to the need to rethink their evaluation in order to avoid reproducing iniquities that have harmful consequences for the field's diversity.

Improving environmental impact and cost assessment for supplier evaluation

NASA Astrophysics Data System (ADS)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Evaluation of Aquarius Version-5 Sea Surface Salinity on various spatial and temporal scales

NASA Astrophysics Data System (ADS)

Lee, T.

2017-12-01

Sea surface salinity (SSS) products from Aquarius have had three public releases with progressive improvement in data quality: Versions 2, 3, and 4, with the last one being released in October 2015. A systematic assessment of the Version-4, Level-3 Aquarius SSS product was performed on various spatial and temporal scales by comparing it with gridded Argo products (Lee 2016, Geophys. Res. Lett.). The comparison showed that the consistency of Aquarius Version-4 SSS with gridded Argo products is comparable to that between two different gridded Argo products. However, significant seasonal biases remain in high-latitude oceans. Further improvements are being made by the Aquarius team. Aquarius Version 5.0 SSS is scheduled to be released in October 2017 as the final version of the Aquarius Project. This presentation provides a similar evaluation of Version-5 SSS as reported by Lee (2016) and contrast it with the current Version-4 SSS.

The Food and Drug Administration Office of Women's Health: Impact of Science on Regulatory Policy: An Update.

PubMed

Elahi, Merina; Eshera, Noha; Bambata, Nkosazana; Barr, Helen; Lyn-Cook, Beverly; Beitz, Julie; Rios, Maria; Taylor, Deborah R; Lightfoote, Marilyn; Hanafi, Nada; DeJager, Lowri; Wiesenfeld, Paddy; Scott, Pamela E; Fadiran, Emmanuel O; Henderson, Marsha B

2016-03-01

The U.S. Food and Drug Administration Office of Women's Health (FDA OWH) has supported women's health research for ∼20 years, funding more than 300 studies on women's health issues, including research on diseases/conditions that disproportionately affect women in addition to the evaluation of sex differences in the performance of and response to medical products. These important women's health issues are studied from a regulatory perspective, with a focus on improving and optimizing medical product development and the evaluation of product safety and efficacy in women. These findings have influenced industry direction, labeling, product discontinuation, safety notices, and clinical practice. In addition, OWH-funded research has addressed gaps in the knowledge about diseases and medical conditions that impact women across the life span such as cardiovascular disease, pregnancy, menopause, osteoporosis, and the safe use of numerous medical products.

SPITFIRE-1

NASA Technical Reports Server (NTRS)

Ryntz, Edward F.

1995-01-01

The purpose of this effort is to develop low-cost rapid forming superplastic aluminum that will be evaluated in pilot production trials for automotive SPF components. The alloy development study conducted under SPITFIRE-1 showed that the addition of CU or Mn to the base 5083 aluminum alloy refined the grain size, leading to enhanced superplastic properties. In SPITFIRE-2, these alloy variants will be further refined and studied to meet the target properties established earlier in the program. Mechanical properties, component forming and post-forming properties will be evaluated. Also, the alloy production process, including thermomechanical processing (TMP) optimization to reduce production cost, will be investigated during SPITFIRE-2. After identifying preferred compositions and production processing, the most promising alloy will be manufactured into production coils for verification during SPITFIRE-3. Components will be produced from these coils in SPITFIRE-4, and the process and component performance will be assessed.

The Food and Drug Administration Office of Women's Health: Impact of Science on Regulatory Policy: An Update

PubMed Central

Elahi, Merina; Eshera, Noha; Bambata, Nkosazana; Barr, Helen; Lyn-Cook, Beverly; Beitz, Julie; Rios, Maria; Taylor, Deborah R.; Lightfoote, Marilyn; Hanafi, Nada; DeJager, Lowri; Wiesenfeld, Paddy; Scott, Pamela E.; Henderson, Marsha B.

2016-01-01

Abstract The U.S. Food and Drug Administration Office of Women's Health (FDA OWH) has supported women's health research for ∼20 years, funding more than 300 studies on women's health issues, including research on diseases/conditions that disproportionately affect women in addition to the evaluation of sex differences in the performance of and response to medical products. These important women's health issues are studied from a regulatory perspective, with a focus on improving and optimizing medical product development and the evaluation of product safety and efficacy in women. These findings have influenced industry direction, labeling, product discontinuation, safety notices, and clinical practice. In addition, OWH-funded research has addressed gaps in the knowledge about diseases and medical conditions that impact women across the life span such as cardiovascular disease, pregnancy, menopause, osteoporosis, and the safe use of numerous medical products. PMID:26871618

Analytic double product integrals for all-frequency relighting.

PubMed

Wang, Rui; Pan, Minghao; Chen, Weifeng; Ren, Zhong; Zhou, Kun; Hua, Wei; Bao, Hujun

2013-07-01

This paper presents a new technique for real-time relighting of static scenes with all-frequency shadows from complex lighting and highly specular reflections from spatially varying BRDFs. The key idea is to depict the boundaries of visible regions using piecewise linear functions, and convert the shading computation into double product integrals—the integral of the product of lighting and BRDF on visible regions. By representing lighting and BRDF with spherical Gaussians and approximating their product using Legendre polynomials locally in visible regions, we show that such double product integrals can be evaluated in an analytic form. Given the precomputed visibility, our technique computes the visibility boundaries on the fly at each shading point, and performs the analytic integral to evaluate the shading color. The result is a real-time all-frequency relighting technique for static scenes with dynamic, spatially varying BRDFs, which can generate more accurate shadows than the state-of-the-art real-time PRT methods.

The Dreaded "P" Word: An Examination of Productivity in Public Postsecondary Education

ERIC Educational Resources Information Center

Kelly, Patrick J.

2009-01-01

In 2005, the National Center for Higher Education Management Systems (NCHEMS) produced a report entitled "A New Look at the Institutional Component of Higher Education Finance: A Guide for Evaluating Performance Relative to Financial Resources." It gauged the performance of state public postsecondary education sectors (i.e. research, bachelor's…

Performance evaluation of pumping systems used in commercial-scale, split-pond aquaculture

USDA-ARS?s Scientific Manuscript database

Split-pond aquaculture systems have been adopted widely by United States catfish farmers as a way to improve production performance. The split-pond consists of a fish-culture basin that is connected to a waste-treatment lagoon by two water conveyance structures. Water is circulated between the two b...

Development and construction of low-cracking high-performance concrete (LC-HPC) bridge decks : free shrinkage, moisture optimization and concrete production : final report.

DOT National Transportation Integrated Search

2009-08-01

The development and evaluation of low-cracking high-performance concrete (LC-HPC) for use in bridge decks : is described based on laboratory test results and experience gained during the construction of 14 bridges. This report : emphasizes the materi...

Financial performance of loblolly and longleaf pine plantations

Treesearch

Steven D. Mills; Charles T. Stiff

2013-01-01

The financial performance of selected management regimes for loblolly (Pinus taeda L.) and longleaf pine (P. palustris Mill.) plantations were compared for four cases, each with low- and high-site productivity levels and each evaluated using 5 and 7 percent real discount rates. In all cases, longleaf pine was considered both with...

A commercial application of fire retardants to dry-formed hardboards

Treesearch

Gary C. Meyers; Carlton A. Holmes

1977-01-01

Based on laboratory performance with a number of fire-retardant chemicals, disodium octaborate tetrahydrate-boric acid and dicyandiamide-phosphoric acid-formaldehyde were selected for treating fiber and making 4 foot by 8-foot dry-formed hardboards on a commercial production line. The boards were evaluated for performance under exposure to fire, strength, dimensional...

Exploring the Epistemic Impacts of Academic Performance Indicators in the Life Sciences

ERIC Educational Resources Information Center

Müller, Ruth; de Rijcke, Sarah

2017-01-01

While quantitative performance indicators are widely used by organizations and individuals for evaluative purposes, little is known about their impacts on the epistemic processes of academic knowledge production. In this article we bring together three qualitative research projects undertaken in the Netherlands and Austria to contribute to filling…

An Evaluation of a Performing Arts Experiment in a Special School.

ERIC Educational Resources Information Center

Harland, John

1990-01-01

Describes an experimental project to infuse performing arts into the curriculum of a North Yorkshire residential school for emotionally and behaviorally disturbed boys, 11-16. The project involved artists in applying the Royal Opera House model, in which children take responsibility for the creation of their own musical production. (SK)

Development and construction of low-cracking high-performance concrete (LC-HPC) bridge decks : free shrinkage, moisture optimization and concrete production : summary report.

DOT National Transportation Integrated Search

2009-08-01

The development and evaluation of low-cracking high-performance concrete (LC-HPC) for use in bridge decks : is described based on laboratory test results and experience gained during the construction of 14 bridges. This report : emphasizes the materi...

Comprehensive evaluation of the long-term performance of rubberized pavement, phase I : laboratory study of rubberized asphalt mix performance.

DOT National Transportation Integrated Search

2012-12-01

Crumb rubber, made from scrap tires, has been introduced into the production of different types of hot : mix asphalt (HMA) in either a wet or dry process. In the wet process, the crumb rubber and binder are : completely mixed to form asphalt rubber (...

Improvements in safety testing of lithium cells

NASA Astrophysics Data System (ADS)

Stinebring, R. C.; Krehl, P.

1985-07-01

A systematic approach was developed for evaluating the basic safety parameters of high power lithium soluble cathode cells. This approach consists of performing a series of tests on each cell model during the design, prototype and production phases. Abusive testing is performed in a facility where maximum protection is given to test personnel.

Improvements in safety testing of lithium cells

NASA Technical Reports Server (NTRS)

Stinebring, R. C.; Krehl, P.

1985-01-01

A systematic approach was developed for evaluating the basic safety parameters of high power lithium soluble cathode cells. This approach consists of performing a series of tests on each cell model during the design, prototype and production phases. Abusive testing is performed in a facility where maximum protection is given to test personnel.

LED Lighting in a Performing Arts Building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, N. J.; Kaye, S. M.; Coleman, P. M.

At the University of Florida in Gainesville, the DOE Solid-State Lighting GATEWAY program evaluated LED architectural and theatrical lighting in four academic/performance-related spaces within the Nadine McGuire Theatre + Dance Pavilion. Due to a wise choice of products and luminaire light distributions, the change brought significant quality improvements including improved controllability and color.

Early Childhood Practitioner Judgments of the Social Validity of Performance Checklists and Parent Practice Guides

ERIC Educational Resources Information Center

Dunst, Carl J.

2017-01-01

Findings from three field tests evaluations of early childhood intervention practitioner performance checklists and three parent practice guides are reported. Forty-two practitioners from three early childhood intervention programs reviewed the checklists and practice guides and made (1) social validity judgments of both products, (2) judgments of…

Collaboration of chemistry instructional games and group investigation (Gi) model to improve learning outcome in high school students

NASA Astrophysics Data System (ADS)

Puspita, Ita; Sugiyarto, Kristian H.; Ikhsan, Jaslin

2017-05-01

The aims of this research are to: (1) develop chemistry instructional games on reaction rate matter; and (2) reveal the collaboration of chemistry instructional games and group investigation model to improvement learning outcome in high school student. This study is research and development (R&D). The procedure of developing product was adapted from Borg & Gall that modified into three principal steps: product planning, product developing, and product evaluating. The product planning step consist of field study, literature study, and manufacturing product. Product developing was developed product using Adobe Flash Professional CS 6 program. The last, product evaluating was performed by year XI of high school students, uses experimental methods nonequivalent control-group design by control class and experiment class. The results of this research show that: (1) a software of chemistry instructional games successfully developed using Adobe Flash Professional CS 6 and can be run on Android device; and (2) the test results of students showed that the collaboration of instructional games and group investigation model able to improvement learning outcome of hight school student.

Applying CBR to machine tool product configuration design oriented to customer requirements

NASA Astrophysics Data System (ADS)

Wang, Pengjia; Gong, Yadong; Xie, Hualong; Liu, Yongxian; Nee, Andrew Yehching

2017-01-01

Product customization is a trend in the current market-oriented manufacturing environment. However, deduction from customer requirements to design results and evaluation of design alternatives are still heavily reliant on the designer's experience and knowledge. To solve the problem of fuzziness and uncertainty of customer requirements in product configuration, an analysis method based on the grey rough model is presented. The customer requirements can be converted into technical characteristics effectively. In addition, an optimization decision model for product planning is established to help the enterprises select the key technical characteristics under the constraints of cost and time to serve the customer to maximal satisfaction. A new case retrieval approach that combines the self-organizing map and fuzzy similarity priority ratio method is proposed in case-based design. The self-organizing map can reduce the retrieval range and increase the retrieval efficiency, and the fuzzy similarity priority ratio method can evaluate the similarity of cases comprehensively. To ensure that the final case has the best overall performance, an evaluation method of similar cases based on grey correlation analysis is proposed to evaluate similar cases to select the most suitable case. Furthermore, a computer-aided system is developed using MATLAB GUI to assist the product configuration design. The actual example and result on an ETC series machine tool product show that the proposed method is effective, rapid and accurate in the process of product configuration. The proposed methodology provides a detailed instruction for the product configuration design oriented to customer requirements.

Cross-evaluation of ground-based, multi-satellite and reanalysis precipitation products: Applicability of the Triple Collocation method across Mainland China

NASA Astrophysics Data System (ADS)

Li, Changming; Tang, Guoqiang; Hong, Yang

2018-07-01

Evaluating the reliability of satellite and reanalysis precipitation products is critical but challenging over ungauged or poorly gauged regions. The Triple Collocation (TC) method is a reliable approach to estimate the accuracy of any three independent inputs in the absence of truth values. This study assesses the uncertainty of three types of independent precipitation products, i.e., satellite-based, ground-based and model reanalysis over Mainland China using the TC method. The ground-based data set is Gauge Based Daily Precipitation Analysis (CGDPA). The reanalysis data set is European Reanalysis Agency Reanalysis Product (ERA-interim). The satellite-based products include five mainstream satellite products. The comparison and evaluation are conducted at 0.25° and daily resolutions from 2013 to 2015. First, the effectiveness of the TC method is evaluated in South China with dense gauge network. The results demonstrate that the TC method is reliable because the correlation coefficient (CC) and root mean square error (RMSE) derived from TC are close to those derived from ground observations, with only 9% and 7% mean relative differences, respectively. Then, the TC method is applied in Mainland China, with special attention paid to the Tibetan Plateau (TP) known as the Earth's third pole with few ground stations. Results indicate that (1) The overall performance of IMERG is better than the other satellite products over Mainland China, followed by 3B42V7, CMORPH-CRT and PERSIANN-CDR. (2) In the TP, CGDPA shows the best overall performance over gauged grid cells, however, over ungauged regions, IMERG and ERA-interim slightly outperform CGDPA with similar RMSE but higher mean CC (0.63, 0.61, and 0.58, respectively). It highlights the strengths and potentiality of remote sensing and reanalysis data over the TP and reconfirms the cons of the inherent uncertainty of CGDPA due to interpolation from sparsely gauged data. The study concludes that the TC method provides not only reliable cross-validation results over Mainland China but also a new perspective for comparatively assessing multi-source precipitation products, particularly over poorly gauged regions such as the TP.

Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility.

PubMed

van den Oever, Martien; Molenveld, Karin

2017-07-25

Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of bio-based plastics were presented, together with economic considerations. The present paper discusses the mechanical and thermal properties of a range of commercially available bio-based plastics based on polylactic acid (PLA), cellulose esters, starch and polyamides, and the feasibility of replacing fossil-based counterparts based on performance. The evaluation is approached from an end user perspective. First, potentially suitable bio-based plastics are selected based on manufacturers' specifications in technical data sheets, then a first experimental evaluation is performed on injection moulded ISO specimens, and finally a further selection of plastics is tested on large 50×70cm panels. This technical feasibility study indicates that so far bio-based plastics do not completely match the properties of high performance materials like flame retardant V-0 PC/ABS blends used in electronic devices. The performance gap is being decreased by the development of stereocomplex PLA and hybrid PLA blends with polycarbonate, which offer clearly improved properties with respect to maximum usage temperature and toughness. In addition, several materials meet the V-0 flammability requirements needed in specific durable applications. On the other hand, improving these properties so far has negative consequences for the bio-based content. This study also shows that replacement of bulk polymers like PS is feasible using PLA compounds with a bio-based content as high as 85%. Copyright © 2016 Elsevier B.V. All rights reserved.

Performance of Particulate Containment at Nanotechnology Workplaces

PubMed Central

Lo, Li-Ming; Tsai, Candace S.-J.; Dunn, Kevin H.; Hammond, Duane; Marlow, David; Topmiller, Jennifer; Ellenbecker, Michael

2015-01-01

The evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These controls assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems. Activity-based monitoring with direct-reading instruments and filter sampling for microscopy analysis were used to evaluate the effectiveness of control measures at study sites. Our study results showed that weighing CNTs inside the biological safety cabinet can have a 37% reduction on the particle concentration in the worker’s breathing zone, and produce a 42% lower area concentration outside the enclosure. The ventilated enclosures used to reduce fugitive emissions from the production furnaces exhibited good containment characteristics when closed, but they failed to contain emissions effectively when opened during product removal/harvesting. The exhaust filtration systems employed for exhausting these ventilated enclosures did not provide promised collection efficiencies for removing engineered nanomaterials from furnace exhaust. The exterior hoods were found to be a challenge for controlling emissions from machining nanocomposites: the downdraft hood effectively contained and removed particles released from the manual cutting process, but using the canopy hood for powered cutting of nanocomposites created 15%–20% higher ultrafine (<500 nm) particle concentrations at the source and at the worker’s breathing zone. The microscopy analysis showed that CNTs can only be found at production sources but not at the worker breathing zones during the tasks monitored. PMID:26705393

Management of rosacea-prone skin: evaluation of a skincare product containing Ambophenol, Neurosensine, and La Roche-Posay Thermal spring water as monotherapy or adjunctive therapy.

PubMed

Seite, Sophie; Benech, Florence; Berdah, Sandrine; Bayer, Muriel; Veyrat, Sophie; Segot, Evelyne; Sakalikova, Marcela; Gibejova, Lucia; Zelenkova, Hana

2013-08-01

The objective of these studies was to investigate whether a skincare product containing Ambophenol, Neurosensine, and La Roche-Posay thermal spring water formulated in a highly protective packaging can have an impact in the management of rosacea-prone skin subjects. Several studies were performed to evaluate the efficacy of this product in the management of rosacea prone skin, as either monotherapy or adjunctive therapy or to maintain the efficacy of a Metronidazole treatment. The first study was performed on 37 women aged 18-45 with added stage 2 erythro-couperosis, who applied test formula as monotherapy twice a day for 4 weeks. During a second study, a dermatological evaluation was performed on patients with stage I or II rosacea, a questionnaire containing information about patient characteristics, tolerance, clinical signs, symptoms and skin reactivity to "trigger factors" was completed by dermatologists at baseline and 2 months after treatment with the test formula as either monotherapy or adjunctive therapy. Finally, in a third study, 65 patients finishing a Metronidazole treatment applied once daily and the tested formula twice daily were divided into 2 groups using the test formula or vehicle control, twice a day for 8 weeks for the evaluation of efficacy as adjunctive therapy. We noted that the test formula, as an adjunctive therapy, helped prolong the efficacy of a Metronidazole treatment. In monotherapy, there was a significant efficacy of the test formula associated with an excellent tolerance. A significant improvement of all the clinical signs and symptoms of rosacea and a reduction of the skin reactivity to "trigger factors" were shown. These studies highlight the interest value and impact of a skincare product containing Ambophenol, Neurosensine, and La Roche-Posay thermal spring water formulated in a highly protective packaging in monotherapy or in combination with or after a therapeutic treatment in the management of patients suffering from rosacea.

Agronomic efficiency of phosphate fertilizers produced by the re-use of a metallurgical acid residue.

PubMed

Barreto, Matheus Sampaio Carneiro; Mattiello, Edson Marcio; Santos, Wedisson Oliveira; Melo, Leônidas Carrijo Azevedo; Vergütz, Leonardus; Novais, Roberto Ferreira

2018-02-15

The production of fertilizers with industrial wastes reduces the environmental impacts of waste disposal and improves environmental sustainability by generating added-value products. Our objective with this study was to evaluate the agronomic performance and potential soil/plant contamination with heavy metals of alternative phosphate (P) fertilizers, obtained from the acidulation of phosphate rocks (PR) by a metallurgical acidic waste. Seven P fertilizers were evaluated: three PR (Araxá, Patos, and Bayóvar), their respective acidulated products (PAPR), and triple superphosphate fertilizer (TSP). A greenhouse trial was carried out to test the agronomic performances of fertilizers in a sequentially cultivated maize-soybean-white oat. The reaction of PR with acid waste was effective to increase their solubility and improve plant yield and P uptake compared to their natural PR. There was a cumulative recovery by plants of 1.4 and 8.1% of added P via PR and PAPR, respectively. No increase in heavy metal (Cd, Pb, Cr, and Ni) availability in soil or accumulation in shoots was observed, indicating that the PAPR were environmentally safe. The usage of acid waste to produce P fertilizers therefore represents a strategic way to employ marginal products for the production of fertilizers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Toward an understanding of the impact of production pressure on safety performance in construction operations.

PubMed

Han, Sanguk; Saba, Farzaneh; Lee, Sanghyun; Mohamed, Yasser; Peña-Mora, Feniosky

2014-07-01

It is not unusual to observe that actual schedule and quality performances are different from planned performances (e.g., schedule delay and rework) during a construction project. Such differences often result in production pressure (e.g., being pressed to work faster). Previous studies demonstrated that such production pressure negatively affects safety performance. However, the process by which production pressure influences safety performance, and to what extent, has not been fully investigated. As a result, the impact of production pressure has not been incorporated much into safety management in practice. In an effort to address this issue, this paper examines how production pressure relates to safety performance over time by identifying their feedback processes. A conceptual causal loop diagram is created to identify the relationship between schedule and quality performances (e.g., schedule delays and rework) and the components related to a safety program (e.g., workers' perceptions of safety, safety training, safety supervision, and crew size). A case study is then experimentally undertaken to investigate this relationship with accident occurrence with the use of data collected from a construction site; the case study is used to build a System Dynamics (SD) model. The SD model, then, is validated through inequality statistics analysis. Sensitivity analysis and statistical screening techniques further permit an evaluation of the impact of the managerial components on accident occurrence. The results of the case study indicate that schedule delays and rework are the critical factors affecting accident occurrence for the monitored project. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation and characterization of the methane-carbon dioxide decomposition reaction

NASA Technical Reports Server (NTRS)

Davenport, R. J.; Schubert, F. H.; Shumar, J. W.; Steenson, T. S.

1975-01-01

A program was conducted to evaluate and characterize the carbon dioxide-methane (CO2-CH4) decomposition reaction, i.e., CO2 + CH4 = 2C + 2H2O. The primary objective was to determine the feasibility of applying this reaction at low temperatures as a technique for recovering the oxygen (O2) remaining in the CO2 which exits mixed with CH4 from a Sabatier CO2 reduction subsystem (as part of an air revitalization system of a manned spacecraft). A test unit was designed, fabricated, and assembled for characterizing the performance of various catalysts for the reaction and ultraviolet activation of the CH4 and CO2. The reactor included in the test unit was designed to have sufficient capacity to evaluate catalyst charges of up to 76 g (0.17 lb). The test stand contained the necessary instrumentation and controls to obtain the data required to characterize the performance of the catalysts and sensitizers tested: flow control and measurement, temperature control and measurement, product and inlet gas analysis, and pressure measurement. A product assurance program was performed implementing the concepts of quality control and safety into the program effort.

Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes

NASA Astrophysics Data System (ADS)

Sari, M. M.; Noordin, M. Y.; Brusa, E.

2012-09-01

Electrical discharge machining (EDM) is one of the most accurate non traditional manufacturing processes available for creating tiny apertures, complex or simple shapes and geometries within parts and assemblies. Performance of the EDM process is usually evaluated in terms of surface roughness, existence of cracks, voids and recast layer on the surface of product, after machining. Unfortunately, the high heat generated on the electrically discharged material during the EDM process decreases the quality of products. Carbon nanotubes display unexpected strength and unique electrical and thermal properties. Multi-wall carbon nanotubes are therefore on purpose added to the dielectric used in the EDM process to improve its performance when machining the AISI H13 tool steel, by means of copper electrodes. Some EDM parameters such as material removal rate, electrode wear rate, surface roughness and recast layer are here first evaluated, then compared to the outcome of EDM performed without using nanotubes mixed to the dielectric. Independent variables investigated are pulse on time, peak current and interval time. Experimental evidences show that EDM process operated by mixing multi-wall carbon nanotubes within the dielectric looks more efficient, particularly if machining parameters are set at low pulse of energy.

Quality by design case study: an integrated multivariate approach to drug product and process development.

PubMed

Huang, Jun; Kaul, Goldi; Cai, Chunsheng; Chatlapalli, Ramarao; Hernandez-Abad, Pedro; Ghosh, Krishnendu; Nagi, Arwinder

2009-12-01

To facilitate an in-depth process understanding, and offer opportunities for developing control strategies to ensure product quality, a combination of experimental design, optimization and multivariate techniques was integrated into the process development of a drug product. A process DOE was used to evaluate effects of the design factors on manufacturability and final product CQAs, and establish design space to ensure desired CQAs. Two types of analyses were performed to extract maximal information, DOE effect & response surface analysis and multivariate analysis (PCA and PLS). The DOE effect analysis was used to evaluate the interactions and effects of three design factors (water amount, wet massing time and lubrication time), on response variables (blend flow, compressibility and tablet dissolution). The design space was established by the combined use of DOE, optimization and multivariate analysis to ensure desired CQAs. Multivariate analysis of all variables from the DOE batches was conducted to study relationships between the variables and to evaluate the impact of material attributes/process parameters on manufacturability and final product CQAs. The integrated multivariate approach exemplifies application of QbD principles and tools to drug product and process development.

Evaluation and optimization of a commercial blocking ELISA for detecting antibodies to influenza A virus for research and surveillance of mallards.

PubMed

Shriner, Susan A; VanDalen, Kaci K; Root, J Jeffrey; Sullivan, Heather J

2016-02-01

The availability of a validated commercial assay is an asset for any wildlife investigation. However, commercial products are often developed for use in livestock and are not optimized for wildlife. Consequently, it is incumbent upon researchers and managers to apply commercial products appropriately to optimize program outcomes. We tested more than 800 serum samples from mallards for antibodies to influenza A virus with the IDEXX AI MultiS-Screen Ab test to evaluate assay performance. Applying the test per manufacturer's recommendations resulted in good performance with 84% sensitivity and 100% specificity. However, performance was improved to 98% sensitivity and 98% specificity by increasing the recommended cut-off. Using this alternative threshold for identifying positive and negative samples would greatly improve sample classification, especially for field samples collected months after infection when antibody titers have waned from the initial primary immune response. Furthermore, a threshold that balances sensitivity and specificity reduces estimation bias in seroprevalence estimates. Published by Elsevier B.V.

Performance evaluation of low cost microbial fuel cell fabricated using earthen pot with biotic and abiotic cathode.

PubMed

Behera, Manaswini; Jana, Partha S; Ghangrekar, M M

2010-02-01

An attempt has been made to produce low cost MFC from the commercially available earthen pots in India, without involving any costly membrane. This MFC gave a maximum power output of 16.8 W/m(3) at a Coulombic efficiency (CE) of 31.3% with graphite plate cathode. With stainless steel mesh cathode and KMnO(4) as cathodic electrolyte the power production and CE of 70.48 W/m(3) and 64.5%, respectively, was obtained. The performance of this earthen pot MFC was evaluated with biotic and abiotic cathode. Although, biofilm formation on the cathode is observed to be helpful in enhancing power out put, the thicker biofilm on the cathode showed reduction in power. This MFC demonstrated competitive performance as compared to MFC incorporated with membrane. This low cost MFC, with total production cost of less than 1.0$, as per Indian market, demonstrated its utility as a wastewater treatment and onsite power generation device.

Deodorant effects of a supercritical hops extract: antibacterial activity against Corynebacterium xerosis and Staphylococcus epidermidis and efficacy testing of a hops/zinc ricinoleate stick in humans through the sensory evaluation of axillary deodorancy.

PubMed

Dumas, Elizabeth R; Michaud, Amy E; Bergeron, Chantal; Lafrance, Jennifer L; Mortillo, Susan; Gafner, Stefan

2009-09-01

There is little scientific evidence to support the efficacy of natural deodorants and therefore, such products may be perceived as inefficacious. The evaluation of the in vitro antibacterial activity of a hop extract and the evaluation of the odor-reducing capacity of a hops/zinc ricinoleate-containing product by a sensory evaluation panel is employed to verify deodorant performance. The goal of this study was to evaluate the in vitro antibacterial activity of a hop extract against Corynebacterium xerosis and Staphylococcus epidermidis and to verify in vivo deodorant performance of a hops/zinc ricinoleate-containing product. The hops extract was evaluated on a culture of an armpit swab from six volunteers. Furthermore, the extract was submitted to a zone of inhibition test and an agar-dilution assay against two major odor-causing bacteria. The clinical evaluation of the finished product was carried out according to a standard method for substantiating deodorant efficacy using trained odor judges for the assessment of axillary malodor (ASTM method E 1207-87 Standard Practice for the Sensory Evaluation of Axillary Deodorancy). The supercritical hops extract showed good antibacterial activities in all three tests. Minimum inhibitory concentration values of 6.25 and 25 mug/mL against C. xerosis and S. aureus, respectively, were obtained in the agar-dilution assay. In the clinical underarm odor-reduction evaluation, the mean malodor score dropped from 6.28 (+/-0.70) to 1.80 (+/-0.71) after 8 h of application. There was still a noticeable effect at both 12 and 24 h after the application, with a score of 1.82 (+/-0.74) and 2.24 (+/-0.77), respectively. The hops extract has good in vitro antibacterial properties and, in combination with zinc ricinoleate in an appropriate base, delivers in vivo odor reduction. The clinical efficacy is likely due to a combination of the base ingredients and the antibacterial actives.

Performance Stability of Silicone Oxide-Coated Plastic Parenteral Vials.

PubMed

Weikart, Christopher M; Pantano, Carlo G; Shallenberger, Jeff R

2017-01-01

A new packaging system was developed for parenteral pharmaceuticals that combines the best attributes of plastic and glass without their respective drawbacks. This technological advancement is based on the synergy between high-precision injection-molded plastics and plasma coating technology. The result is a shatter-resistant, optically clear, low-particulate, and chemically durable packaging system. The demand for this product is driven by the expanding market, regulatory constraints, and product recalls for injectable drugs and biologics packaged in traditional glass materials. It is shown that this new packaging system meets or exceeds the important performance characteristics of glass, especially in eliminating the glass delamination and breakage that has been observed in many products. The new packaging system is an engineered, multilayer, glass-coated plastic composite that provides a chemically stable contact surface and oxygen barrier performance that exceeds a 2 year shelf life requirement. Evaluation of the coating system characteristics and performance stability to chemical, temperature, and mechanical extremes are reported herein. LAY ABSTRACT: A new packaging system for parenteral pharmaceuticals was developed that combines the best attributes of plastic and glass without their respective drawbacks. This technological advancement is based on the synergy between high-precision injection-molded plastics and plasma coating technology. The result is a shatter-resistant, optically clear, low-particulate, and chemically durable packaging system. It is shown that this new packaging system meets or exceeds the important performance characteristics of glass, especially in eliminating the glass delamination and breakage that has been observed in many products. The new packaging system is an engineered, multilayer, glass-coated plastic composite that provides a chemically stable contact surface and oxygen barrier performance that exceeds a 2 year shelf life requirement. Evaluation of the coating system characteristics and performance stability to chemical, temperature, and mechanical extremes are reported herein. © PDA, Inc. 2017.

Home-based radiology transcription and a productivity pay plan.

PubMed

Kerr, K

1997-01-01

Shands Hospital in Gainesville, Fla., decided to evaluate the way it provided transcription services in its radiology department. It identified four goals: increased productivity, decreased operating expense, finding much needed space in the radiology department and increasing employee morale. The department performs 165,000 procedures annually, with 66 radiologists, 29 faculty, and 37 residents and fellows on staff. Six FTEs comprised the transcription pool in the radiology department, with transcription their only duty. Transcriptionists were paid an hourly rate based on their years of service, not their productivity. Evaluation and measurement studies were undertaken by the hospital's management systems engineering department. The transcriptionists' hours were then changed to provide coverage during the periods of heaviest dictation. The productivity level of the transcription staff was also measured and various methods of measurement reviewed. The goal was a pure incentive pay plan that would reward employees for every increase in productivity. The incentive pay plan was phased in over a three-month period. Transcriptionists were paid for work performed, with no base pay beyond minimum wage. The move to home-based transcription was planned. The necessary equipment was identified and various issues specific to working at home were addressed. Approximately six months later, the transcriptionists were set up to work at home. The astounding results achieved are presented: 28% increase in productivity, operational cost savings exceeding $25,000 and a space savings of 238 square feet.

An Evaluation Model Applied to a Mathematics-Methods Program Involving Three Characteristics of Teaching Style and Their Relationship to Pupil Achievement. Teacher Education Forum; Volume 3, Number 4.

ERIC Educational Resources Information Center

Dodd, Carol Ann

This study explores a technique for evaluating teacher education programs in terms of teaching competencies, as applied to the Indiana University Mathematics Methods Program (MMP). The evaluation procedures formulated for the study include a process product design in combination with a modification of Pophan's performance test paradigm and Gage's…

Teratologic Evaluation of a Model Perfluorinated Acid, NDFDA

DTIC Science & Technology

1981-01-01

perfluorocarboxylic and perfluorosulfonic acids. I & G Product Research and Development. Vol. 1, No. 3, 165-169. Olson, C. T. and K. C. Back 1978...AFAMRL-TR-81 -14 TERATOLOGIC EVALUATION OF A MODEL PERFLUORINATED ACID, NDFDA INEZ R. BA CON UNIVERSITY OF THE DISTRICT OF COLUMBIA DEPARTMENT OF...TYPE OF REPORT & PERIOD COVERED TERATOLOGIC EVALUATION OF A MODEL PERFLUORINATED ACID, NDFDA 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(s) S. CONTRACT

A quantitative evaluation of a qualitative risk assessment framework: Examining the assumptions and predictions of the Productivity Susceptibility Analysis (PSA)

PubMed Central

2018-01-01

Qualitative risk assessment frameworks, such as the Productivity Susceptibility Analysis (PSA), have been developed to rapidly evaluate the risks of fishing to marine populations and prioritize management and research among species. Despite being applied to over 1,000 fish populations, and an ongoing debate about the most appropriate method to convert biological and fishery characteristics into an overall measure of risk, the assumptions and predictive capacity of these approaches have not been evaluated. Several interpretations of the PSA were mapped to a conventional age-structured fisheries dynamics model to evaluate the performance of the approach under a range of assumptions regarding exploitation rates and measures of biological risk. The results demonstrate that the underlying assumptions of these qualitative risk-based approaches are inappropriate, and the expected performance is poor for a wide range of conditions. The information required to score a fishery using a PSA-type approach is comparable to that required to populate an operating model and evaluating the population dynamics within a simulation framework. In addition to providing a more credible characterization of complex system dynamics, the operating model approach is transparent, reproducible and can evaluate alternative management strategies over a range of plausible hypotheses for the system. PMID:29856869

Retaining your high performers: moderators of the performance-job satisfaction-voluntary turnover relationship.

PubMed

Nyberg, Anthony

2010-05-01

Two divergent ideas explain the relationship between performance and voluntary turnover. One suggests that higher performing employees, who are rewarded for their superior work product, will desire to remain with an organization that values their performance and will, consequently, be less likely than lower performing employees to voluntarily leave. An alternative idea suggests that higher performing employees, who are more desirable to external companies as a result of their superior work product, will have more external job opportunities and will, consequently, be more likely than their lower performing colleagues to voluntarily leave. The current study evaluated the behaviors and attitudes of 12,545 insurance employees over a 3-year period to examine how these 2 divergent expectations influence the performance-voluntary turnover relationship. Results show that both pay growth and the relevant unemployment rate interact with performance to influence the performance-voluntary turnover relationship and that they work independently of employee job satisfaction influences. PsycINFO Database Record (c) 2010 APA, all rights reserved.

Biotechnological application of sustainable biogas production through dry anaerobic digestion of Napier grass.

PubMed

Dussadee, Natthawud; Ramaraj, Rameshprabu; Cheunbarn, Tapana

2017-05-01

Napier grass (Pennisetum purpureum), represents an interesting substrate for biogas production. The research project evaluated biogas potential production from dry anaerobic digestion of Napier grass using batch experiment. To enhance the biogas production from ensiled Napier grass, thermal and alkaline pre-treatments were performed in batch mode. Alkali hydrolysis of Napier grass was performed prior to batch dry anaerobic digestion at three different mild concentrations of sodium hydroxide (NaOH). The study results confirmed that NaOH pretreated sample produced high yield of biogas than untreated (raw) and hot water pretreated samples. Napier grass was used as the mono-substrate. The biogas composition of carbon dioxide (30.10%), methane (63.50%) and 5 ppm of H 2 S was estimated from the biogas. Therefore, fast-growing, high-yielding and organic matter-enriched of Napier grass was promising energy crop for biogas production.

Developing an Emergency Physician Productivity Index Using Descriptive Health Analytics.

PubMed

Khalifa, Mohamed

2015-01-01

Emergency department (ED) crowding became a major barrier to receiving timely emergency care. At King Faisal Specialist Hospital and Research Center, Saudi Arabia, we identified variables and factors affecting crowding and performance to develop indicators to help evaluation and improvement. Measuring efficiency of work and activity of throughput processes; it was important to develop an ED physician productivity index. Data on all ED patients' encounters over the last six months of 2014 were retrieved and descriptive health analytics methods were used. Three variables were identified for their influence on productivity and performance; Number of Treated Patients per Physician, Patient Acuity Level and Treatment Time. The study suggested a formula to calculate the productivity index of each physician through dividing the Number of Treated Patients by Patient Acuity Level squared and Treatment Time to identify physicians with low productivity index and investigate causes and factors.

Product vs corporate carbon footprint: Some methodological issues. A case study and review on the wine sector.

PubMed

Navarro, Alejandra; Puig, Rita; Fullana-I-Palmer, Pere

2017-03-01

Carbon footprint (CF) is nowadays one of the most widely used environmental indicators. The scope of the CF assessment could be corporate (when all production processes of a company are evaluated, together with upstream and downstream processes following a life cycle approach) or product (when one of the products is evaluated throughout its life cycle). Our hypothesis was that usually product CF studies (PCF) collect corporate data, because it is easier for companies to obtain them than product data. Six main methodological issues to take into account when collecting corporate data to be used for PCF studies were postulated and discussed in the present paper: fugitive emissions, credits from waste recycling, use of "equivalent factors", reference flow definition, accumulation and allocation of corporate values to minor products. A big project with 18 wineries, being wine one of the most important agri-food products assessed through CF methodologies, was used to study and to exemplify these 6 methodological issues. One of the main conclusions was that indeed, it is possible to collect corporate inventory data in a per year basis to perform a PCF, but having in mind the 6 methodological issues described here. In the literature, most of the papers are presenting their results as a PCF, while they collected company data and obtained, in fact, a "key performance indicator" (ie., CO 2 eq emissions per unit of product produced), which is then used as a product environmental impact figure. The methodology discussed in this paper for the wine case study is widely applicable to any other product or industrial activity. Copyright © 2017 Elsevier B.V. All rights reserved.

Manufacturing methods of a composite cell case for a Ni-Cd battery

NASA Technical Reports Server (NTRS)

Bauer, J. L.; Bogner, R. S.; Lowe, E. P.; Orlowski, E.

1979-01-01

Graphite epoxy material for a nickel cadmium battery cell case has been evaluated and determined to perform in the simulated environment of the battery. The basic manufacturing method requires refinement to demonstrate production feasibility. The various facets of production scale-up, i.e., process and tooling development together with material and process control, have been integrated into a comprehensive manufacturing process that assures production reproducibility and product uniformity. Test results substantiate that a battery cell case produced from graphite epoxy pre-impregnated material utilizing internal pressure bag fabrication method is feasible.

Application of a Taxonomical Structure to Measure Worker Productivity for Performance Evaluation

DTIC Science & Technology

1994-06-01

Recreational & Athletic Equipment 1. Athletic & Sporting Equipment (7810) 1 2 3 4 5 2. Games, Toys & Wheeled Goods (7820) 1 2 3 4 5 3. Recreational & Gymnastic ...Varnishes & Related Products (8010) 1 2 3 4 5 2. Paint & Artist Brushes (8020) 1 2 3 4 5 3. Preservative & Sealing Compounds (8030) 1 2 3 4 5 4. Adhesives

An Alternative Method for Computing Unit Costs and Productivity Ratios. AIR 1984 Annual Forum Paper.

ERIC Educational Resources Information Center

Winstead, Wayland H.; And Others

An alternative measure for evaluating the performance of academic departments was studied. A comparison was made with the traditional manner for computing unit costs and productivity ratios: prorating the salary and effort of each faculty member to each course level based on the personal mix of course taught. The alternative method used averaging…

Combining control input with flight path data to evaluate pilot performance in transport aircraft.

PubMed

Ebbatson, Matt; Harris, Don; Huddlestone, John; Sears, Rodney

2008-11-01

When deriving an objective assessment of piloting performance from flight data records, it is common to employ metrics which purely evaluate errors in flight path parameters. The adequacy of pilot performance is evaluated from the flight path of the aircraft. However, in large jet transport aircraft these measures may be insensitive and require supplementing with frequency-based measures of control input parameters. Flight path and control input data were collected from pilots undertaking a jet transport aircraft conversion course during a series of symmetric and asymmetric approaches in a flight simulator. The flight path data were analyzed for deviations around the optimum flight path while flying an instrument landing approach. Manipulation of the flight controls was subject to analysis using a series of power spectral density measures. The flight path metrics showed no significant differences in performance between the symmetric and asymmetric approaches. However, control input frequency domain measures revealed that the pilots employed highly different control strategies in the pitch and yaw axes. The results demonstrate that to evaluate pilot performance fully in large aircraft, it is necessary to employ performance metrics targeted at both the outer control loop (flight path) and the inner control loop (flight control) parameters in parallel, evaluating both the product and process of a pilot's performance.

Effective production control in an automotive industry: MRP vs. demand-driven MRP

NASA Astrophysics Data System (ADS)

Shofa, Mohamad Jihan; Widyarto, Wahyu Oktri

2017-06-01

Material Requirements Planning (MRP) has deficiencies when dealing with current business environments, marked by a more complex network, a huge variety of products with longer lead time, and uncertain demands. This drives Demand-Driven MRP (DDMRP) approach to deal with those challenges. DDMRP is designed to connect the availability of materials and supplies directly from the actual condition using bills of materials (BOMs). Nevertheless, only few studies have scientifically proved the performance of DDMRP over MRP for controlling production and inventory control. Therefore, this research fills this gap by evaluating and comparing the performance of DDMRP and MRP in terms of level of effective inventory in the system. The evaluation was conducted through a simulation using data from an automotive company in Indonesia. The input parameters of scenarios were given for running the simulation. Based on the simulation, for the observed critical parts, DDMRP gave better results than MRP in terms of lead time and inventory level. DDMRP compressed the lead time part from 52 to 3 days (94% reduced) and, overall, the inventory level was in an effective condition. This suggests that DDMRP is more effective for controlling the production-inventory than MRP.

Investigating the Evolution of Progressive Die Wear on Uncoated Dp1180 Steel in Production Environment

NASA Astrophysics Data System (ADS)

Wu, W.; Zhou, D. J.; Adamski, D. J.; Young, D.; Wang, Y. W.

2017-09-01

A study of die wear was performed using an uncoated dual phase, 1,180 MPa ultimate tensile strength steel (DP1180) in a progressive die. The objectives of the current study are to evaluate the die durability of various tooling materials and coatings for forming operations on uncoated DP1180 steel and update OEM’s die standards based on the experimental results in the real production environment. In total, 100,800 hits were performed in manufacturing production conditions, where 33 die inserts with the combination of 10 die materials and 9 coatings were investigated. The die inserts were evaluated for surface wear using scanning electron microscopy and characterized in terms of die material and/or coating defects, failure mode, failure initiation and propagation. Surface roughness of the formed parts was characterized using a WYKO NT110 machine. The analytical analysis of the die inserts and formed parts, combined with the failure mode and service life, provide a basis for die material and coating selection for forming AHSS components. The conclusions of this study will guide the selection of die material and coatings for high-volume production of AHSS components.

Postmarketing Surveillance for “Modified-Risk” Tobacco Products

PubMed Central

2012-01-01

Introduction: The U.S. Food and Drug Administration (FDA) acquired authority to regulate tobacco products in 2009. This authority will provide a structured process for manufacturers to introduce products that may have “modified-risk” for morbidity or mortality relative to traditional tobacco products, with postmarketing surveillance and studies a condition of marketing. Method: A narrative review approach was taken. The author searched and integrated publicly accessible literature on tobacco product surveillance as well as drug and medical device postmarket activities currently performed by FDA. Results: FDA relies on active and passive methods for postmarket surveillance and can require specific studies and risk evaluation and mitigation strategies for certain products, including those with abuse liability. Past efforts at examining the individual and population effects of reduced harm tobacco products provide an example of integrating different data streams. Discussion: Postmarket surveillance can be viewed in terms of the Agent–Host–Vector–Environment model, and concepts from diffusion of innovations are relevant to understanding factors associated with the adoption of new products by the population. Given that active and passive surveillance approaches have different strengths and weaknesses, multiple approaches may be necessary to evaluate population-level effects. Assuring that required studies are properly conducted and reported and that data indicating significant public health harms are quickly recognized will be important going forward. Conclusions: The advent of broad regulatory authority over tobacco provides opportunities for policy evaluation research. The research community can provide FDA with the independent science it needs to evaluate the public health impact of novel tobacco products. PMID:21330282

Evaluating Oilseed Biofuel Production Feasibility in California’s San Joaquin Valley Using Geophysical and Remote Sensing Techniques

PubMed Central

Corwin, Dennis L.; Yemoto, Kevin; Clary, Wes; Banuelos, Gary; Skaggs, Todd H.; Lesch, Scott M.

2017-01-01

Though more costly than petroleum-based fuels and a minor component of overall military fuel sources, biofuels are nonetheless strategically valuable to the military because of intentional reliance on multiple, reliable, secure fuel sources. Significant reduction in oilseed biofuel cost occurs when grown on marginally productive saline-sodic soils plentiful in California’s San Joaquin Valley (SJV). The objective is to evaluate the feasibility of oilseed production on marginal soils in the SJV to support a 115 ML yr−1 biofuel conversion facility. The feasibility evaluation involves: (1) development of an Ida Gold mustard oilseed yield model for marginal soils; (2) identification of marginally productive soils; (3) development of a spatial database of edaphic factors influencing oilseed yield and (4) performance of Monte Carlo simulations showing potential biofuel production on marginally productive SJV soils. The model indicates oilseed yield is related to boron, salinity, leaching fraction, and water content at field capacity. Monte Carlo simulations for the entire SJV fit a shifted gamma probability density function: Q = 68.986 + gamma (6.134,5.285), where Q is biofuel production in ML yr−1. The shifted gamma cumulative density function indicates a 0.15–0.17 probability of meeting the target biofuel-production level of 115 ML yr−1, making adequate biofuel production unlikely. PMID:29036925

Productive performance of the dairy cattle Girolando breed mediated by the fat-related genes DGAT1 and LEP and their polymorphisms.

PubMed

Cardoso, S R; Queiroz, L B; Goulart, V Alonso; Mourão, G B; Benedetti, E; Goulart, L R

2011-12-01

Candidate genes have been associated with milk production in bovines, such as the diacylglycerol O-acyltransferase 1 (DGAT1) and leptin (LEP); however, they have not been simultaneously investigated nor have been evaluated in the Brazilian Girolando breed (Gir×Holstein, backcrossed to Holstein). Our aim was to determine the influence of fat-related genes, DGAT1 and LEP, and their polymorphisms on performance traits of milk production in the Girolando breed. Results indicated that the K allele of the DGAT1 gene showed a significant association with total and average daily milk production with additive effect. The LEP gene showed that the A allele and its homozygote are highly prevalent and almost fixed in this population and may have been favorably selected during backcrossing for the origin of this breed. The important impact of the K allele of the DGAT1 gene on milk production corroborates the initiative of performing marker-assisted selections with this gene in breeding programs of the Girolando breed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Performance Evaluation of Machine Learning Methods for Leaf Area Index Retrieval from Time-Series MODIS Reflectance Data

PubMed Central

Wang, Tongtong; Xiao, Zhiqiang; Liu, Zhigang

2017-01-01

Leaf area index (LAI) is an important biophysical parameter and the retrieval of LAI from remote sensing data is the only feasible method for generating LAI products at regional and global scales. However, most LAI retrieval methods use satellite observations at a specific time to retrieve LAI. Because of the impacts of clouds and aerosols, the LAI products generated by these methods are spatially incomplete and temporally discontinuous, and thus they cannot meet the needs of practical applications. To generate high-quality LAI products, four machine learning algorithms, including back-propagation neutral network (BPNN), radial basis function networks (RBFNs), general regression neutral networks (GRNNs), and multi-output support vector regression (MSVR) are proposed to retrieve LAI from time-series Moderate Resolution Imaging Spectroradiometer (MODIS) reflectance data in this study and performance of these machine learning algorithms is evaluated. The results demonstrated that GRNNs, RBFNs, and MSVR exhibited low sensitivity to training sample size, whereas BPNN had high sensitivity. The four algorithms performed slightly better with red, near infrared (NIR), and short wave infrared (SWIR) bands than red and NIR bands, and the results were significantly better than those obtained using single band reflectance data (red or NIR). Regardless of band composition, GRNNs performed better than the other three methods. Among the four algorithms, BPNN required the least training time, whereas MSVR needed the most for any sample size. PMID:28045443

Performance Evaluation of Machine Learning Methods for Leaf Area Index Retrieval from Time-Series MODIS Reflectance Data.

PubMed

Wang, Tongtong; Xiao, Zhiqiang; Liu, Zhigang

2017-01-01

Leaf area index (LAI) is an important biophysical parameter and the retrieval of LAI from remote sensing data is the only feasible method for generating LAI products at regional and global scales. However, most LAI retrieval methods use satellite observations at a specific time to retrieve LAI. Because of the impacts of clouds and aerosols, the LAI products generated by these methods are spatially incomplete and temporally discontinuous, and thus they cannot meet the needs of practical applications. To generate high-quality LAI products, four machine learning algorithms, including back-propagation neutral network (BPNN), radial basis function networks (RBFNs), general regression neutral networks (GRNNs), and multi-output support vector regression (MSVR) are proposed to retrieve LAI from time-series Moderate Resolution Imaging Spectroradiometer (MODIS) reflectance data in this study and performance of these machine learning algorithms is evaluated. The results demonstrated that GRNNs, RBFNs, and MSVR exhibited low sensitivity to training sample size, whereas BPNN had high sensitivity. The four algorithms performed slightly better with red, near infrared (NIR), and short wave infrared (SWIR) bands than red and NIR bands, and the results were significantly better than those obtained using single band reflectance data (red or NIR). Regardless of band composition, GRNNs performed better than the other three methods. Among the four algorithms, BPNN required the least training time, whereas MSVR needed the most for any sample size.

Structural Evaluation of the Second Oldest Glued-Laminated Structure in the United States

Treesearch

Douglas R. Rammer; Jorge de Melo Moura

2013-01-01

The second glued-laminated structure built in the United States was constructed at the USDA Forest Products Laboratory (FPL) in 1934 to demonstrate the performance of wooden arch buildings. After decades of use the structure was decommissioned in 2010. Shortly after construction, researchers structurally evaluated the glued-laminated arch structure for uniform loading...

Federal Motor Carrier Safety Administration’s advanced system testing utilizing a data acquisition system on the highways (FAST DASH) safety technology evaluation project #3 : novel convex mirrors.

DOT National Transportation Integrated Search

2016-11-01

An independent evaluation of a set of novel prototype mirrors was conducted to determine whether the mirrors perform as well as traditional production mirrors across the basic functions of field of view (FOV), image distortion, and distance estimatio...

RADC thermal guide for reliability engineers

NASA Astrophysics Data System (ADS)

Morrison, G. N.; Kallis, J. M.; Strattan, L. A.; Jones, I. R.; Lena, A. L.

1982-06-01

This guide was developed to provide a reliability engineer, who is not proficient in thermal design and analysis techniques, with the tools for managing and evaluating the thermal design and production of electronic equipment. It defines the requirements and tasks that should be addressed in system equipment specifications and statements of work, and describes how to evaluate performance.

Results from a Multi-Modal Program Evaluation of a Four Year Statewide Juvenile Sex Offender Treatment and Reentry Program

ERIC Educational Resources Information Center

Underwood, Lee A.; Dailey, Frances L. L.; Merino, Carrie; Crump, Yolanda

2015-01-01

The results of the Program Evaluation show the OJJ Statewide Sex Offender Treatment program is exceptionally productive in meeting over 90% of its established performance markers. These markers included successful screening and assessment of risk and psychosocial needs, completion of initial and master treatment plans, establishment of sex…

Evaluating effective swath width and droplet distribution of aerial spraying systems on M-18B and Thrush 510G airplanes

USDA-ARS?s Scientific Manuscript database

Aerial spraying plays an important role in promoting agricultural production and protecting the biological environment due to its flexibility, high effectiveness, and large operational area per unit of time. In order to evaluate the performance parameters of the spraying systems on two fixed wing ai...

Follow-Through Project, Health-Education-Welfare Fund (Fund Number 88-1). 1971-1972 Evaluation.

ERIC Educational Resources Information Center

Halasa, Ofelia; Fleming, Margaret

The 1971-72 evaluation report of Project Follow Through in the Cleveland public schools focuses on the following issues: (1) degree to which product objectives at each grade level were attained, (2) degree to which such factors as project participation, teacher, preschool experience, and socio-economic factors influenced children's performance,…

Performance Evaluation and Quality Validation System for Optical Gas Imaging Cameras that Visualize Fugitive Hydrocarbon Gas Emissions

EPA Science Inventory

A U.S. EPA team, consisting of the Office of Research and Development and Region 6 (Dallas) and Region 8 (Denver), deployed passive-diffusive sorbent tubes as part of a method evaluation study around one oil and natural gas production pad in both the Barnett Shale Basin in Texas ...

Optical laboratory solution and error model simulation of a linear time-varying finite element equation

NASA Technical Reports Server (NTRS)

Taylor, B. K.; Casasent, D. P.

1989-01-01

The use of simplified error models to accurately simulate and evaluate the performance of an optical linear-algebra processor is described. The optical architecture used to perform banded matrix-vector products is reviewed, along with a linear dynamic finite-element case study. The laboratory hardware and ac-modulation technique used are presented. The individual processor error-source models and their simulator implementation are detailed. Several significant simplifications are introduced to ease the computational requirements and complexity of the simulations. The error models are verified with a laboratory implementation of the processor, and are used to evaluate its potential performance.

Perception of premenstrual syndrome and attitude of evaluations of work performance among incoming university female students.

PubMed

Cheng, Shu Hui; Sun, Zih-Jie; Lee, I Hui; Shih, Chi-Chen; Chen, Kao Chin; Lin, Shih-Hsien; Lu, Feng-Hwa; Yang, Yi-Ching; Yang, Yen Kuang

2015-01-01

Premenstrual syndrome (PMS) is a common condition, and for 5% of women, the influence is so severe as to interfere with their mental health, interpersonal relationships, or studies. Severe PMS may result in decreased occupational productivity. The aim of this study was to investigate the influence of perception of PMS on evaluation of work performance. A total of 1971 incoming female university students were recruited in September 2009. A simulated clinical scenario was used, with a test battery including measurement of psychological symptoms and the Chinese Premenstrual Symptom Questionnaire. When evaluating employee performance in the simulated scenario, 1565 (79.4%) students neglected the impact of PMS, while 136 (6.9%) students considered it. Multivariate logistic regression showed that perception of daily function impairment due to PMS and frequency of measuring body weight were significantly associated with consideration of the influence of PMS on evaluation of work performance. It is important to increase the awareness of functional impairments related to severe PMS.

Coupling Hydraulic Fracturing Propagation and Gas Well Performance for Simulation of Production in Unconventional Shale Gas Reservoirs

NASA Astrophysics Data System (ADS)

Wang, C.; Winterfeld, P. H.; Wu, Y. S.; Wang, Y.; Chen, D.; Yin, C.; Pan, Z.

2014-12-01

Hydraulic fracturing combined with horizontal drilling has made it possible to economically produce natural gas from unconventional shale gas reservoirs. An efficient methodology for evaluating hydraulic fracturing operation parameters, such as fluid and proppant properties, injection rates, and wellhead pressure, is essential for the evaluation and efficient design of these processes. Traditional numerical evaluation and optimization approaches are usually based on simulated fracture properties such as the fracture area. In our opinion, a methodology based on simulated production data is better, because production is the goal of hydraulic fracturing and we can calibrate this approach with production data that is already known. This numerical methodology requires a fully-coupled hydraulic fracture propagation and multi-phase flow model. In this paper, we present a general fully-coupled numerical framework to simulate hydraulic fracturing and post-fracture gas well performance. This three-dimensional, multi-phase simulator focuses on: (1) fracture width increase and fracture propagation that occurs as slurry is injected into the fracture, (2) erosion caused by fracture fluids and leakoff, (3) proppant subsidence and flowback, and (4) multi-phase fluid flow through various-scaled anisotropic natural and man-made fractures. Mathematical and numerical details on how to fully couple the fracture propagation and fluid flow parts are discussed. Hydraulic fracturing and production operation parameters, and properties of the reservoir, fluids, and proppants, are taken into account. The well may be horizontal, vertical, or deviated, as well as open-hole or cemented. The simulator is verified based on benchmarks from the literature and we show its application by simulating fracture network (hydraulic and natural fractures) propagation and production data history matching of a field in China. We also conduct a series of real-data modeling studies with different combinations of hydraulic fracturing parameters and present the methodology to design these operations with feedback of simulated production data. The unified model aids in the optimization of hydraulic fracturing design, operations, and production.

Assessment of ocular discomfort caused by 5 shampoos using the Slug Mucosal Irritation test.

PubMed

Petit, Jean-Yanique; Doré, Vanessa; Marignac, Geneviève; Perrot, Sébastien

2017-04-01

Assessment of ocular discomfort caused by veterinary care products is less legitimately regulated than that caused by human care products. The Slug Mucosal Irritation (SMI) assay was adapted to evaluate canine hygiene shampoos to predict ocular discomfort. Experiments were performed using four commercial canine shampoos, a baby care product, and two controls (ArtTear® and BAC1%). Groups of 3 slugs were tested with 5% dilution of the 7 test substances. The negative control (ArtTear®) was the best tolerated. The baby care product Mixa bébé as well as Douxo Entretien Démêlant and Phlox Shampooing Entretien were classified to cause mild ocular discomfort. Together with the positive control (BAC 1%), Shampooing Physiologique Virbac and Physiovet Shampooing were considered to cause severe ocular discomfort. Different intensities of ocular discomfort were measured for veterinary care products. The SMI model was considered as a reproducible and adaptable evaluation method for screening veterinary care products causing ocular discomfort. Copyright © 2017 Elsevier Ltd. All rights reserved.

Rust transformation/rust compatible primers

NASA Technical Reports Server (NTRS)

Emeric, Dario A.; Miller, Christopher E.

1993-01-01

Proper surface preparation has been the key to obtain good performance by a surface coating. The major obstacle in preparing a corroded or rusted surface is the complete removal of the contaminants and the corrosion products. Sandblasting has been traditionally used to remove the corrosion products before painting. However, sandblasting can be expensive, may be prohibited by local health regulations and is not applicable in every situation. To get around these obstacles, Industry developed rust converters/rust transformers and rust compatible primers (high solids epoxies). The potential use of these products for military equipment led personnel of the Belvoir Research, Development and Engineering Center (BRDEC) to evaluate the commercially available rust transformers and rust compatible primers. Prior laboratory experience with commercially available rust converters, as well as field studies in Hawaii and Puerto Rico, revealed poor performance, several inherent limitations, and lack of reliability. It was obvious from our studies that the performance of rust converting products was more dependent on the amount and type of rust present, as well as the degree of permeability of the coating, than on the product's ability to form an organometallic complex with the rust. Based on these results, it was decided that the Military should develop their own rust converter formulation and specification. The compound described in the specification is for use on a rusted surface before the application of an organic coating (bituminous compounds, primer or topcoat). These coatings should end the need for sandblasting or the removing of the adherent corrosion products. They also will prepare the surface for the application of the organic coating. Several commercially available rust compatible primers (RCP) were also tested using corroded surfaces. All of the evaluated RCP failed our laboratory tests for primers.

CloudSat Level 3 Gridded Products: Introduction and Application to Evaluation of the MERRA-2 Reanalysis

NASA Astrophysics Data System (ADS)

Haynes, J. M.; Miller, S. D.; Partain, P.

2016-12-01

CloudSat mission data are currently available to the science community in the form of granule-level, single-orbit Level 2 products. Although this is useful for process-level studies and investigation of individual radar profiles, it is less convenient for regional studies or investigations requiring that cloud properties be aggregated over long periods of time. This aggregation process is not necessary straight-forward: it must be tailored to the specific data product and scientific data contained therein, it requires large amounts of data transfer, and care must be taken to perform the aggregation only on statistically significant spatial and temporal scales. To make CloudSat data more accessible to the broader scientific community and in order to better preserve the environmental data record, a suite of Level 3 (L3), gridded data products are being developed by the CloudSat Data Processing Center (DPC). These products are being developed in four broad categories: (1) radiation budget, (2) radar reflectivity, (3) precipitation incidence and type, and (4) microphysics. L3 products will be generated on both standard (i.e. fixed resolution) grids, and dynamically with user-configurable grid spacing and timescales via an online user interface. An important distinction of the current L3 development is in its usage of dynamically configurable histograms, allowing for representation of the detailed, non-Gaussian characteristics of the data distribution. This work serves to both introduce these products to the wider scientific community and demonstrate their utility for model and reanalysis evaluation. Toward the latter goal, an analysis of the new Modern Era Retrospective-Analysis for Research and Applications version 2 (MERRA-2) cloud products is performed using a development version of the CloudSat L3 products. L3 products are used to evaluate near-global cloud fraction, optical depth, cloud liquid and ice water content, shortwave and longwave cloud radiative effects, and precipitation occurrence. These results are then contrasted against the corresponding MERRA-2 fields, and the differences are explored in terms of potential improvements and/or shortcomings in both the reanalysis and observational products.

Performance-based risk-sharing arrangements-good practices for design, implementation, and evaluation: report of the ISPOR good practices for performance-based risk-sharing arrangements task force.

PubMed

Garrison, Louis P; Towse, Adrian; Briggs, Andrew; de Pouvourville, Gerard; Grueger, Jens; Mohr, Penny E; Severens, J L Hans; Siviero, Paolo; Sleeper, Miguel

2013-01-01

There is a significant and growing interest among both payers and producers of medical products for agreements that involve a "pay-for-performance" or "risk-sharing" element. These payment schemes-called "performance-based risk-sharing arrangements" (PBRSAs)-involve a plan by which the performance of the product is tracked in a defined patient population over a specified period of time and the amount or level of reimbursement is based on the health and cost outcomes achieved. There has always been considerable uncertainty at product launch about the ultimate real-world clinical and economic performance of new products, but this appears to have increased in recent years. PBRSAs represent one mechanism for reducing this uncertainty through greater investment in evidence collection while a technology is used within a health care system. The objective of this Task Force report was to set out the standards that should be applied to "good practices"-both research and operational-in the use of a PBRSA, encompassing questions around the desirability, design, implementation, and evaluation of such an arrangement. This report provides practical recommendations for the development and application of state-of-the-art methods to be used when considering, using, or reviewing PBRSAs. Key findings and recommendations include the following. Additional evidence collection is costly, and there are numerous barriers to establishing viable and cost-effective PBRSAs: negotiation, monitoring, and evaluation costs can be substantial. For good research practice in PBRSAs, it is critical to match the appropriate study and research design to the uncertainties being addressed. Good governance processes are also essential. The information generated as part of PBRSAs has public good aspects, bringing ethical and professional obligations, which need to be considered from a policy perspective. The societal desirability of a particular PBRSA is fundamentally an issue as to whether the cost of additional data collection is justified by the benefits of improved resource allocation decisions afforded by the additional evidence generated and the accompanying reduction in uncertainty. The ex post evaluation of a PBRSA should, however, be a multidimensional exercise that assesses many aspects, including not only the impact on long-term cost-effectiveness and whether appropriate evidence was generated but also process indicators, such as whether and how the evidence was used in coverage or reimbursement decisions, whether budget and time were appropriate, and whether the governance arrangements worked well. There is an important gap in the literature of structured ex post evaluation of PBRSAs. As an innovation in and of themselves, PBRSAs should also be evaluated from a long-run societal perspective in terms of their impact on dynamic efficiency (eliciting the optimal amount of innovation). Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

NASA Technical Reports Server (NTRS)

Gaffin, W. O.; Webb, D. E.

1979-01-01

JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

The Influencing Factor Analysis on the Performance Evaluation of Assembly Line Balancing Problem Level 1 (SALBP-1) Based on ANOVA Method

NASA Astrophysics Data System (ADS)

Chen, Jie; Hu, Jiangnan

2017-06-01

Industry 4.0 and lean production has become the focus of manufacturing. A current issue is to analyse the performance of the assembly line balancing. This study focus on distinguishing the factors influencing the assembly line balancing. The one-way ANOVA method is applied to explore the significant degree of distinguished factors. And regression model is built to find key points. The maximal task time (tmax ), the quantity of tasks (n), and degree of convergence of precedence graph (conv) are critical for the performance of assembly line balancing. The conclusion will do a favor to the lean production in the manufacturing.

Spectrophotometric and computerized evaluation of tooth bleaching employing 10 different home-bleaching procedures: In-vitro study

PubMed Central

Peskersoy, Cem; Tetik, Ayhan; Ozturk, Veli Ozgen; Gokay, Necmi

2014-01-01

Objective: The aim of this in-vitro study was to evaluate the efficacy of bleaching products, determine the applicability and validation of the measurement methods. Materials and Methods: Freshly extracted 110 human incisor teeth were stained with whole blood and hemolysate solution prior to the application of 10 different home-bleaching products. Spectrophotometric measurements of the tooth shades were performed for each specimen before and after bleaching at the 1st, 3rd, 7th, and 14 days. Differences in lightness (Δl), chroma (Δc), hue (Δh) values and shade changes were measured to evaluate process. Computerized digital imaging analyses to determine the color changes were performed with Photoshop CS4 software (Adobe, San Jose, CA, USA). Statistical analyses were performed with analysis of variance, Scheffe and Tukey tests. Results: In all of the test groups regardless of the material used, a significant increase in lightness and hue, and decrease of chroma were observed, as compared to the control group. After recommended bleaching applications, Δl and Δh values respectively increased in group Zaris White and Brite (ZWB) and group Pola Night and Δc values showed significant decrease in groups ZWB and Rembrandt REM3 (P < 0.05). At the end of the procedure both spectrophotometric and digital imaging analysis showed ZWB was the most effective product among the others while Yotuel and Happy Smile were the least (P < 0.05). Conclusions: Home-bleaching systems showed slower but almost permanent bleaching effect likewise office-based methods. Both software and spectrophotometric analyses have advantages such as evaluating the results objectively and numerically, also treatment outcomes could be preserved. PMID:25512738

Experimental evaluation of a flexible I/O architecture for accelerating workflow engines in ultrascale environments

DOE PAGES

Duro, Francisco Rodrigo; Blas, Javier Garcia; Isaila, Florin; ...

2016-10-06

The increasing volume of scientific data and the limited scalability and performance of storage systems are currently presenting a significant limitation for the productivity of the scientific workflows running on both high-performance computing (HPC) and cloud platforms. Clearly needed is better integration of storage systems and workflow engines to address this problem. This paper presents and evaluates a novel solution that leverages codesign principles for integrating Hercules—an in-memory data store—with a workflow management system. We consider four main aspects: workflow representation, task scheduling, task placement, and task termination. As a result, the experimental evaluation on both cloud and HPC systemsmore » demonstrates significant performance and scalability improvements over existing state-of-the-art approaches.« less

Performance measurement for supply chain management and evaluation criteria determination for reverse supply chain management

NASA Astrophysics Data System (ADS)

Kongar, N. Elif

2004-12-01

Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.

Evaluation of performance indicators applied to a material recovery facility fed by mixed packaging waste.

PubMed

Mastellone, Maria Laura; Cremiato, Raffaele; Zaccariello, Lucio; Lotito, Roberta

2017-06-01

Most of the integrated systems for municipal solid waste management aim to increase the recycling of secondary materials by means of physical processes including sorting, shredding and reprocessing. Several restrictions prevent from reaching a very high material recycling efficiency: the variability of the composition of new-marketed materials used for packaging production and its shape and complexity are critical issues. The packaging goods are in fact made of different materials (aluminium, polymers, paper, etc.), possibly assembled, having different shape (flat, cylindrical, one-dimensional, etc.), density, colours, optical properties and so on. These aspects limit the effectiveness and efficiency of the sorting and reprocessing plants. The scope of this study was to evaluate the performance of a large scale Material Recovery Facility (MRF) by utilizing data collected during a long period of monitoring. The database resulted from the measured data has been organized in four sections: (1) data related to the amount and type of inlet waste; (2) amount and composition of output products and waste; (3) operating data (such as worked hours for shift, planned and unscheduled maintenance time, setting parameters of the equipment, and energy consumption for shift); (4) economic data (value of each product, disposal price for the produced waste, penalty for non-compliance of products and waste, etc.). A part of this database has been utilized to build an executive dashboard composed by a set of performance indicators suitable to measure the effectiveness and the efficiency of the MRF operations. The dashboard revealed itself as a powerful tool to support managers and engineers in their decisions in respect to the market demand or compliance regulation variation as well as in the designing of the lay-out improvements. The results indicated that the 40% of the input waste was recovered as valuable products and that a large part of these (88%) complied with the standards of the recycling companies. The evaluation of the indicators led to the decision to modify the layout to improve the interception of some polymers for which the performance indicators were poor. In particular, two additional optical sorters have to be inserted to increase the yield indicator and to the overall performance of the facility. Definitely, the results of the work allowed to: increase the yield and purity of products' flows; ensure the compliance of waste flows; increase the workability. Copyright © 2017 Elsevier Ltd. All rights reserved.

Validation of GEOLAND-2 Spot/vgt Albedo Products by Using Ceos Olive Methodology

NASA Astrophysics Data System (ADS)

Camacho de Coca, F.; Sanchez, J.; Schaaf, C.; Baret, F.; Weiss, M.; Cescatti, A.; Lacaze, R. N.

2012-12-01

This study evaluates the scientific merit of the global surface albedo products developed in the framework of the Geoland-2 project based on SPOT/VEGETATION observations. The methodology follows the OLIVE (On-Line Validation Exercise) approach supported by the CEOS Land Product Validation subgroup (calvalportal.ceos.org/cvp/web/olive). First, the spatial and temporal consistency of SPOT/VGT albedo products was assessed by intercomparison with reference global products (MODIS/Terra+Aqua and POLDER-3/PARASOL) for the period 2006-2007. A bulk statistical analysis over a global network of 420 homogeneous sites (BELMANIP-2) was performed and analyzed per biome types. Additional sites were included to study albedo under snow conditions. Second, the accuracy and realism of temporal variations were evaluated using a number of ground measurements from FLUXNET sites suitable for use in direct comparison to the co-located satellite data. Our results show that SPOT/VGT albedo products present reliable spatial and temporal distribution of retrievals. The SPOT/VGT albedo performs admirably with MODIS, with a mean bias and RMSE for the shortwave black-sky albedo over BELMANIP-2 sites lower than 0.006 and 0.03 (13% in relative terms) respectively, and even better for snow free pixels. Similar results were found for the white-sky albedo quantities. Discrepancies are larger when comparing with POLDER-3 products: for the shortwave black-sky albedo a mean bias of -0.014 and RMSE of 0.04 (20%) was found. This overall performance figures are however land-cover dependent and larger uncertainties were found over some biomes (or regions) or specific periods (e.g. winter in the north hemisphere). The comparison of SPOT/VGT blue-sky albedo estimates with ground measurements (mainly over Needle-leaf forest sites) show a RMSE of 0.04 and a bias of 0.003 when only snow-free pixels are considered. Moreover, this work shows that the OLIVE tool is also suitable for validation of global albedo products.

Evaluation of user interface and workflow design of a bedside nursing clinical decision support system.

PubMed

Yuan, Michael Juntao; Finley, George Mike; Long, Ju; Mills, Christy; Johnson, Ron Kim

2013-01-31

Clinical decision support systems (CDSS) are important tools to improve health care outcomes and reduce preventable medical adverse events. However, the effectiveness and success of CDSS depend on their implementation context and usability in complex health care settings. As a result, usability design and validation, especially in real world clinical settings, are crucial aspects of successful CDSS implementations. Our objective was to develop a novel CDSS to help frontline nurses better manage critical symptom changes in hospitalized patients, hence reducing preventable failure to rescue cases. A robust user interface and implementation strategy that fit into existing workflows was key for the success of the CDSS. Guided by a formal usability evaluation framework, UFuRT (user, function, representation, and task analysis), we developed a high-level specification of the product that captures key usability requirements and is flexible to implement. We interviewed users of the proposed CDSS to identify requirements, listed functions, and operations the system must perform. We then designed visual and workflow representations of the product to perform the operations. The user interface and workflow design were evaluated via heuristic and end user performance evaluation. The heuristic evaluation was done after the first prototype, and its results were incorporated into the product before the end user evaluation was conducted. First, we recruited 4 evaluators with strong domain expertise to study the initial prototype. Heuristic violations were coded and rated for severity. Second, after development of the system, we assembled a panel of nurses, consisting of 3 licensed vocational nurses and 7 registered nurses, to evaluate the user interface and workflow via simulated use cases. We recorded whether each session was successfully completed and its completion time. Each nurse was asked to use the National Aeronautics and Space Administration (NASA) Task Load Index to self-evaluate the amount of cognitive and physical burden associated with using the device. A total of 83 heuristic violations were identified in the studies. The distribution of the heuristic violations and their average severity are reported. The nurse evaluators successfully completed all 30 sessions of the performance evaluations. All nurses were able to use the device after a single training session. On average, the nurses took 111 seconds (SD 30 seconds) to complete the simulated task. The NASA Task Load Index results indicated that the work overhead on the nurses was low. In fact, most of the burden measures were consistent with zero. The only potentially significant burden was temporal demand, which was consistent with the primary use case of the tool. The evaluation has shown that our design was functional and met the requirements demanded by the nurses' tight schedules and heavy workloads. The user interface embedded in the tool provided compelling utility to the nurse with minimal distraction.

Laboratory evaluation of oil spill bioremediation products in salt and freshwater systems.

PubMed

Haines, John R; Kleiner, Eric J; McClellan, Kim A; Koran, Karen M; Holder, Edith L; King, Dennis W; Venosa, Albert D

2005-05-01

Ten oil spill bioremediation products were tested in the laboratory for their ability to enhance biodegradation of weathered Alaskan North Slope crude oil in both freshwater and saltwater media. The products included nutrients to stimulate inoculated microorganisms, nutrients plus an oil-degrading inoculum, nutrients plus compounds intended to stimulate oil-degrading activity, or other compounds intended to enhance microbial activity. The product tests were undertaken to evaluate significant modifications in the existing official United States Environmental Protection Agency (EPA) protocol used for qualifying commercial bioremediation agents for use in oil spills. The EPA protocol was modified to include defined formulas for the exposure waters (freshwater, saltwater), a positive control using a known inoculum and nutrients, two negative controls (one sterile, the other inoculated but nutrient-limited), and simplified oil chemical analysis. Three analysts conducted the product test independently in each type of exposure water in round-robin fashion. Statistical tests were performed on analyst variability, reproducibility, and repeatability, and the performance of the various products was quantified in both exposure media. Analysis of variance showed that the analyst error at each time-point was highly significant (P values ranged from 0.0001 to 0.008, depending on water type and oil fraction). In the saltwater tests, six products demonstrated various degrees of biodegradative activity against the alkane fraction of the crude oil and three degraded the aromatic hydrocarbons by >10%. In the freshwater tests, eight products caused >20% loss of alkane hydrocarbons, of which five degraded the alkanes by >50%. Only four products were able to degrade polycyclic aromatic hydrocarbons (PAHs) by >20%, one of which caused 88% removal. However, when the variability of the analysts was taken into consideration, only one of the ten products was found to yield significant percent removals of the PAH fraction and only in freshwater. Viable microorganism population analysis (most-probable-number method) was also performed on every sample by each operator to measure the changes in aromatic and alkane hydrocarbon-degrading organism numbers. In general, little evidence of significant growth of either alkane- or PAH-degraders occurred among any of the ten products in either the saltwater or freshwater testing.

[IMSS in numbers. Evaluation of the performance of health institutions in Mexico, 2004].

PubMed

2006-01-01

The evaluation of health institutions performance in Mexico during 2004 was done using 29 indicators that describe intra-hospital mortality rates, productivity of health services, availability of health resources, quality of care, security, investment and costs of health care and the satisfaction level by users of health services. This exercise describes the efficiency and organization of health services provided by the different health institutions and allows comparing and balancing the performance of each institution. Results indicate the differences in availability of resources, inequity in the financing health care services, and inefficiency in the use of resources but also describe the level of efficacy of certain institutions and the satisfaction level that different users have of health services. The evaluation of the performance of the entire health institutions should provide the means to improve all the process of health care and to increase the quality of care in all health institutions in the country.

Structural Performance of the Second Oldest Glued-Laminated Structure in the United States

Treesearch

Douglas R. Rammer; Jorge de Melo Moura; Robert J. Ross

2014-01-01

The second glued-laminated structure built in the United States was constructed at the USDA Forest Products Laboratory (FPL) in 1934 to demonstrate the performance of wooden arch buildings. After 75 years of use the structure was decommissioned in 2010. Shortly after construction, researchers structurally evaluated the glued-laminated arch structure for uniform loading...

Durability of Hardboard Lap Siding

Treesearch

Charles Carll; Charles R. Boardman; Steve P. Verrill

2013-01-01

This paper describes a study that was undertaken to evaluate the degree of correlation between in-service performance of hardboard siding and its performance in the industry standard test procedure for “weatherability of substrate.” The study included 13 different hardboard sidings: 6 noncommercial boards and 7 commercial products. All manufacturing plants operating in...

Information Assurance Tasks Supporting the Processing of Electronic Records Archives

DTIC Science & Technology

2007-03-01

3 Table 2. OpenVPN evaluation results...........................................................................................10 iv 1...operation of necessary security features and compare the network performance under OpenVPN (openvpn.net) operation with the network performance under no...VPN operation (non-VPN) in a gigabit network environment. The reason for selecting OpenVPN product was based on the previous findings of Khanvilkar

The Mobile Bark Blower: An Evaluation of Performance and Costs

Treesearch

Raymond L. Sarles; David M. Emanuel

1977-01-01

A custom-built bark blower truck (MOBLOW) developed in Oregon was tested for its effectiveness in applying bark mulches, sawdust, and shavings in the eastern United States. Tests determined the bark blower's performance and cost in mulching grass-legume seedings and shrub beds with 10 bark products or wood residues. Bark blower trucks built to MOBLOW...

Effects of color temperatures (Kelvin) of LED bulbs on growth performance, carcass characteristics, and ocular welfare indices of broilers grown to heavy weights

USDA-ARS?s Scientific Manuscript database

Limited data are available for comparing light-emitting diode (LED) bulbs that are currently available in commercial broiler production facilities. We evaluated the effects of color temperatures (Kelvin) of LED bulbs on growth performance, carcass characteristics, and ocular welfare indices of broil...

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Wolf, M.

1981-01-01

The effect of solar cell metallization pattern design on solar cell performance and the costs and performance effects of different metallization processes are discussed. Definitive design rules for the front metallization pattern for large area solar cells are presented. Chemical and physical deposition processes for metallization are described and compared. An economic evaluation of the 6 principal metallization options is presented. Instructions for preparing Format A cost data for solar cell manufacturing processes from UPPC forms for input into the SAMIC computer program are presented.

Performance evaluation approach for the supercritical helium cold circulators of ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaghela, H.; Sarkar, B.; Bhattacharya, R.

2014-01-29

The ITER project design foresees Supercritical Helium (SHe) forced flow cooling for the main cryogenic components, namely, the superconducting (SC) magnets and cryopumps (CP). Therefore, cold circulators have been selected to provide the required SHe mass flow rate to cope with specific operating conditions and technical requirements. Considering the availability impacts of such machines, it has been decided to perform evaluation tests of the cold circulators at operating conditions prior to the series production in order to minimize the project technical risks. A proposal has been conceptualized, evaluated and simulated to perform representative tests of the full scale SHe coldmore » circulators. The objectives of the performance tests include the validation of normal operating condition, transient and off-design operating modes as well as the efficiency measurement. A suitable process and instrumentation diagram of the test valve box (TVB) has been developed to implement the tests at the required thermodynamic conditions. The conceptual engineering design of the TVB has been developed along with the required thermal analysis for the normal operating conditions to support the performance evaluation of the SHe cold circulator.« less

Impact of Rhinitis on Work Productivity: A Systematic Review.

PubMed

Vandenplas, Olivier; Vinnikov, Denis; Blanc, Paul D; Agache, Ioana; Bachert, Claus; Bewick, Michael; Cardell, Lars-Olaf; Cullinan, Paul; Demoly, Pascal; Descatha, Alexis; Fonseca, Joao; Haahtela, Tari; Hellings, Peter W; Jamart, Jacques; Jantunen, Juha; Kalayci, Ömer; Price, David; Samolinski, Boleslaw; Sastre, Joaquin; Tian, Longxiu; Valero, Antonio L; Zhang, Xinyi; Bousquet, Jean

2017-10-07

Allergic rhinitis (AR) is increasingly acknowledged as having a substantial socioeconomic impact associated with impaired work productivity, although available information remains fragmented. This systematic review summarizes recently available information to provide a quantitative estimate of the burden of AR on work productivity including lost work time (ie, absenteeism) and reduced performance while working (ie, presenteeism). A Medline search retrieved original studies from 2005 to 2015 pertaining to the impact of AR on work productivity. A pooled analysis of results was carried out with studies reporting data collected through the validated Work Productivity and Activity Impairment (WPAI) questionnaire. The search identified 19 observational surveys and 9 interventional studies. Six studies reported economic evaluations. Pooled analysis of WPAI-based studies found an estimated 3.6% (95% confidence interval [CI], 2.4; 4.8%) missed work time and 35.9% (95% CI, 29.7; 42.1%) had impairment in at-work performance due to AR. Economic evaluations indicated that indirect costs associated with lost work productivity are the principal contributor to the total AR costs and result mainly from impaired presenteeism. The severity of AR symptoms was the most consistent disease-related factor associated with a greater impact of AR on work productivity, although ocular symptoms and sleep disturbances may independently affect work productivity. Overall, the pharmacologic treatment of AR showed a beneficial effect on work productivity. This systematic review provides summary estimates of the magnitude of work productivity impairment due to AR and identifies its main determinant factors. This information may help guide both clinicians and health policy makers. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Evaluating theory-based evaluation: information, norms, and adherence.

PubMed

Jacobs, W Jake; Sisco, Melissa; Hill, Dawn; Malter, Frederic; Figueredo, Aurelio José

2012-08-01

Programmatic social interventions attempt to produce appropriate social-norm-guided behavior in an open environment. A marriage of applicable psychological theory, appropriate program evaluation theory, and outcome of evaluations of specific social interventions assures the acquisition of cumulative theory and the production of successful social interventions--the marriage permits us to advance knowledge by making use of both success and failures. We briefly review well-established principles within the field of program evaluation, well-established processes involved in changing social norms and social-norm adherence, the outcome of several program evaluations focusing on smoking prevention, pro-environmental behavior, and rape prevention and, using the principle of learning from our failures, examine why these programs often do not perform as expected. Finally, we discuss the promise of learning from our collective experiences to develop a cumulative science of program evaluation and to improve the performance of extant and future interventions. Copyright © 2012. Published by Elsevier Ltd.

European Multicenter Study on Analytical Performance of Veris HIV-1 Assay.

PubMed

Braun, Patrick; Delgado, Rafael; Drago, Monica; Fanti, Diana; Fleury, Hervé; Hofmann, Jörg; Izopet, Jacques; Kalus, Ulrich; Lombardi, Alessandra; Marcos, Maria Angeles; Mileto, Davide; Sauné, Karine; O'Shea, Siobhan; Pérez-Rivilla, Alfredo; Ramble, John; Trimoulet, Pascale; Vila, Jordi; Whittaker, Duncan; Artus, Alain; Rhodes, Daniel W

2017-07-01

The analytical performance of the Veris HIV-1 assay for use on the new, fully automated Beckman Coulter DxN Veris molecular diagnostics system was evaluated at 10 European virology laboratories. The precision, analytical sensitivity, performance with negative samples, linearity, and performance with HIV-1 groups/subtypes were evaluated. The precision for the 1-ml assay showed a standard deviation (SD) of 0.14 log 10 copies/ml or less and a coefficient of variation (CV) of ≤6.1% for each level tested. The 0.175-ml assay showed an SD of 0.17 log 10 copies/ml or less and a CV of ≤5.2% for each level tested. The analytical sensitivities determined by probit analysis were 19.3 copies/ml for the 1-ml assay and 126 copies/ml for the 0.175-ml assay. The performance with 1,357 negative samples demonstrated 99.2% with not detected results. Linearity using patient samples was shown from 1.54 to 6.93 log 10 copies/ml. The assay performed well, detecting and showing linearity with all HIV-1 genotypes tested. The Veris HIV-1 assay demonstrated analytical performance comparable to that of currently marketed HIV-1 assays. (DxN Veris products are Conformité Européenne [CE]-marked in vitro diagnostic products. The DxN Veris product line has not been submitted to the U.S. FDA and is not available in the U.S. market. The DxN Veris molecular diagnostics system is also known as the Veris MDx molecular diagnostics system and the Veris MDx system.). Copyright © 2017 American Society for Microbiology.

Effects of preventive versus "on-demand" nutritional support on paid labour productivity, physical exercise and performance status during PEG-interferon-containing treatment for hepatitis C.

PubMed

Huisman, Ellen J; van Meer, Suzanne; van Hoek, Bart; van Soest, Hanneke; van Nieuwkerk, Karin M J; Arends, Joop E; Siersema, Peter D; van Erpecum, Karel J

2016-04-01

Deterioration of nutritional status during PEG-interferon containing therapy for chronic hepatitis C can be ameliorated by preventive nutritional support. We aimed to explore whether such support also affects paid labour productivity, physical exercise and performance status. In this prospective randomized controlled trial (J Hepatol 2012;57:1069-75), 53 patients with chronic hepatitis C had been allocated to "on demand" support (n=26: nutritional intervention if weight loss>5%) or preventive support (n=27: regular dietary advice plus energy- and protein-rich evening snack) during PEG-interferon-containing therapy. Paid labour productivity, physical exercise and performance status were evaluated at baseline, after 24 and (if applicable) after 48 weeks of treatment. At baseline, 46% of patients performed paid labour and 62% performed some kind of physical exercise. Furthermore, most patients were able to carry out normal activity with only minor symptoms of disease (mean Karnofsky performance score: 94). Decreases of paid labour productivity (-21% vs. -70%, P=0.003), physical exercise activity (-43% vs. -87%, P=0.005) and Karnofsky performance scores (-12% vs. -24%, P<0.001) were less in the preventive than in "on demand" group after 24 weeks of treatment. Effects of preventive nutritional support were even more pronounced after 48 weeks. Preventive nutritional support markedly ameliorates decreases of paid labour productivity, physical exercise and performance status during PEG-interferon-containing treatment for chronic hepatitis C. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Improvements on NYMTC Data Products

DOT National Transportation Integrated Search

2009-11-11

Just like any other scientific research field, the value of data quality is undisputed in the field of transportation. From policy planning to performance evaluation, from model development to impact studies, good quality data is essential to generat...

Evaluation of thermoplastic materials : final report.

DOT National Transportation Integrated Search

1975-04-01

In order to find a striping material which would last longer and have greater reflectance than the presently used traffic paint, research was performed on three relatively new thermoplastic marking compounds. The manufacturers of these products claim...

Comparison of portable crewmember protective breathing equipment (CPBE) designs.

DOT National Transportation Integrated Search

1993-04-01

CPBE presently certified for transport category aircraft employ 3 types of oxygen production systems: chlorate candle, potassium superoxide, and compressed oxygen. CPBE performance was evaluated to expose significant differences based on this distinc...

Test and Evaluation of Commercially Available Halon 1211 Hand-Portable Fire Extinguishers for Use in Habitable and Cargo Compartments of USAF Aircraft

DTIC Science & Technology

1981-05-01

an endorsement or rejection of these products by the Air Force, nor can it be used for advertising a product . SThis report has been reviewed by the... Fvii 41¢,I LIST OF TABLES TABLE TITLE PAGE 1 Baseline Data ............. ......................... .... 24 2 Post-Test Performance - Low Temperature...through its pyrolysis products , when used in the confined crew station or cargo areas of military aircraft. (b) The replacement agent should permit

Studies of the use of heat from high temperature nuclear sources for hydrogen production processes

NASA Technical Reports Server (NTRS)

Farbman, G. H.

1976-01-01

Future uses of hydrogen and hydrogen production processes that can meet the demand for hydrogen in the coming decades were considered. To do this, a projection was made of the market for hydrogen through the year 2000. Four hydrogen production processes were selected, from among water electrolysis, fossil based and thermochemical water decomposition systems, and evaluated, using a consistent set of ground rules, in terms of relative performance, economics, resource requirements, and technology status.

Configuration management plan. System definition and project development. Repository Based Software Engineering (RBSE) program

NASA Technical Reports Server (NTRS)

Mckay, Charles

1991-01-01

This is the configuration management Plan for the AdaNet Repository Based Software Engineering (RBSE) contract. This document establishes the requirements and activities needed to ensure that the products developed for the AdaNet RBSE contract are accurately identified, that proposed changes to the product are systematically evaluated and controlled, that the status of all change activity is known at all times, and that the product achieves its functional performance requirements and is accurately documented.

Solving a product safety problem using a recycled high density polyethylene container

NASA Technical Reports Server (NTRS)

Liu, Ping; Waskom, T. L.

1993-01-01

The objectives are to introduce basic problem-solving techniques for product safety including problem identification, definition, solution criteria, test process and design, and data analysis. The students are given a recycled milk jug made of high density polyethylene (HDPE) by blow molding. The objectives are to design and perform proper material test(s) so they can evaluate the product safety if the milk jug is used in a certain way which is specified in the description of the procedure for this investigation.

Performance pay improves engagement, progress, and satisfaction in computer-based job skills training of low-income adults

PubMed Central

Koffarnus, Mikhail N.; DeFulio, Anthony; Sigurdsson, Sigurdur O.; Silverman, Kenneth

2018-01-01

Advancing the education of low-income adults could increase employment and income, but adult education programs have not successfully engaged low-income adults. Monetary reinforcement may be effective in promoting progress in adult education. This experiment evaluated the benefits of providing incentives for performance in a job-skills training program for low-income, unemployed adults. Participants worked on Typing and Keypad programs for 7 months. Participants randomly assigned to Group A (n=23) earned hourly and productivity pay on the Typing program (Productivity Pay), but earned only equalized hourly pay on the Keypad program (Hourly Pay). Group B (n=19) participants had the opposite contingencies. Participants worked more on, advanced further on, and preferred their productivity pay program. These results show that monetary incentives can increase performance in a job-skills training program, and indicate that payment in adult education programs should be delivered contingent on performance in the training program instead of simply on attendance. PMID:24114155

Performance pay improves engagement, progress, and satisfaction in computer-based job skills training of low-income adults.

PubMed

Koffarnus, Mikhail N; DeFulio, Anthony; Sigurdsson, Sigurdur O; Silverman, Kenneth

2013-01-01

Advancing the education of low-income adults could increase employment and income, but adult education programs have not successfully engaged low-income adults. Monetary reinforcement may be effective in promoting progress in adult education. This experiment evaluated the benefits of providing incentives for performance in a job-skills training program for low-income, unemployed adults. Participants worked on typing and keypad programs for 7 months. Participants randomly assigned to Group A (n = 23) earned hourly and productivity pay on the typing program (productivity pay), but earned only equalized hourly pay on the keypad program (hourly pay). Group B (n = 19) participants had the opposite contingencies. Participants worked more on, advanced further on, and preferred their productivity pay program. These results show that monetary incentives can increase performance in a job-skills training program, and indicate that payment in adult education programs should be delivered contingent on performance in the training program instead of simply on attendance. © Society for the Experimental Analysis of Behavior.

Effect of manganese ions on ethanol fermentation by xylose isomerase expressing Saccharomyces cerevisiae under acetic acid stress.

PubMed

Ko, Ja Kyong; Um, Youngsoon; Lee, Sun-Mi

2016-12-01

The efficient fermentation of lignocellulosic hydrolysates in the presence of inhibitors is highly desirable for bioethanol production. Among the inhibitors, acetic acid released during the pretreatment of lignocellulose negatively affects the fermentation performance of biofuel producing organisms. In this study, we evaluated the inhibitory effects of acetic acid on glucose and xylose fermentation by a high performance engineered strain of xylose utilizing Saccharomyces cerevisiae, SXA-R2P-E, harboring a xylose isomerase based pathway. The presence of acetic acid severely decreased the xylose fermentation performance of this strain. However, the acetic acid stress was alleviated by metal ion supplementation resulting in a 52% increased ethanol production rate under 2g/L of acetic acid stress. This study shows the inhibitory effect of acetic acid on an engineered isomerase-based xylose utilizing strain and suggests a simple but effective method to improve the co-fermentation performance under acetic acid stress for efficient bioethanol production. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Performance of mHealth in Cancer Supportive Care: A Research Agenda

PubMed Central

2015-01-01

Background Since the advent of smartphones, mHealth has risen to the attention of the health care system as something that could radically change the way health care has been viewed, managed, and delivered to date. This is particularly relevant for cancer, as one of the leading causes of death worldwide, and for cancer supportive care, since patients and caregivers have key roles in managing side effects. Given adequate knowledge, they are able to expect appropriate assessments and interventions. In this scenario, mHealth has great potential for linking patients, caregivers, and health care professionals; for enabling early detection and intervention; for lowering costs; and achieving better quality of life. Given its great potential, it is important to evaluate the performance of mHealth. This can be considered from several perspectives, of which organizational performance is particularly relevant, since mHealth may increase the productivity of health care providers and as a result even the productivity of health care systems. Objective This paper aims to review studies on the evaluation of the performance of mHealth, with particular focus on cancer care and cancer supportive care processes, concentrating on its contribution to organizational performance, as well as identifying some indications for a further research agenda. Methods We carried out a review of literature, aimed at identifying studies related to the performance of mHealth in general or focusing on cancer care and cancer supportive care. Results Our analysis revealed that studies are almost always based on a single dimension of performance. Any evaluations of the performance of mHealth are based on very different methods and measures, with a prevailing focus on issues linked to efficiency. This fails to consider the real contribution that mHealth can offer for improving the performance of health care providers, health care systems, and the quality of life in general. Conclusions Further research should start by stating and explaining what is meant by the evaluation of mHealth’s performance and then conduct more in-depth analysis in order to create shared frameworks to specifically identify the different dimensions of mHealth’s performance. PMID:25720295

The performance of mHealth in cancer supportive care: a research agenda.

PubMed

Nasi, Greta; Cucciniello, Maria; Guerrazzi, Claudia

2015-02-13

Since the advent of smartphones, mHealth has risen to the attention of the health care system as something that could radically change the way health care has been viewed, managed, and delivered to date. This is particularly relevant for cancer, as one of the leading causes of death worldwide, and for cancer supportive care, since patients and caregivers have key roles in managing side effects. Given adequate knowledge, they are able to expect appropriate assessments and interventions. In this scenario, mHealth has great potential for linking patients, caregivers, and health care professionals; for enabling early detection and intervention; for lowering costs; and achieving better quality of life. Given its great potential, it is important to evaluate the performance of mHealth. This can be considered from several perspectives, of which organizational performance is particularly relevant, since mHealth may increase the productivity of health care providers and as a result even the productivity of health care systems. This paper aims to review studies on the evaluation of the performance of mHealth, with particular focus on cancer care and cancer supportive care processes, concentrating on its contribution to organizational performance, as well as identifying some indications for a further research agenda. We carried out a review of literature, aimed at identifying studies related to the performance of mHealth in general or focusing on cancer care and cancer supportive care. Our analysis revealed that studies are almost always based on a single dimension of performance. Any evaluations of the performance of mHealth are based on very different methods and measures, with a prevailing focus on issues linked to efficiency. This fails to consider the real contribution that mHealth can offer for improving the performance of health care providers, health care systems, and the quality of life in general. Further research should start by stating and explaining what is meant by the evaluation of mHealth's performance and then conduct more in-depth analysis in order to create shared frameworks to specifically identify the different dimensions of mHealth's performance.

Design of neural network model-based controller in a fed-batch microbial electrolysis cell reactor for bio-hydrogen gas production

NASA Astrophysics Data System (ADS)

Azwar; Hussain, M. A.; Abdul-Wahab, A. K.; Zanil, M. F.; Mukhlishien

2018-03-01

One of major challenge in bio-hydrogen production process by using MEC process is nonlinear and highly complex system. This is mainly due to the presence of microbial interactions and highly complex phenomena in the system. Its complexity makes MEC system difficult to operate and control under optimal conditions. Thus, precise control is required for the MEC reactor, so that the amount of current required to produce hydrogen gas can be controlled according to the composition of the substrate in the reactor. In this work, two schemes for controlling the current and voltage of MEC were evaluated. The controllers evaluated are PID and Inverse neural network (NN) controller. The comparative study has been carried out under optimal condition for the production of bio-hydrogen gas wherein the controller output is based on the correlation of optimal current and voltage to the MEC. Various simulation tests involving multiple set-point changes and disturbances rejection have been evaluated and the performances of both controllers are discussed. The neural network-based controller results in fast response time and less overshoots while the offset effects are minimal. In conclusion, the Inverse neural network (NN)-based controllers provide better control performance for the MEC system compared to the PID controller.

Development and evaluation of an intelligent traceability system for frozen tilapia fillet processing.

PubMed

Xiao, Xinqing; Fu, Zetian; Qi, Lin; Mira, Trebar; Zhang, Xiaoshuan

2015-10-01

The main export varieties in China are brand-name, high-quality bred aquatic products. Among them, tilapia has become the most important and fast-growing species since extensive consumer markets in North America and Europe have evolved as a result of commodity prices, year-round availability and quality of fresh and frozen products. As the largest tilapia farming country, China has over one-third of its tilapia production devoted to further processing and meeting foreign market demand. Using by tilapia fillet processing, this paper introduces the efforts for developing and evaluating ITS-TF: an intelligent traceability system integrated with statistical process control (SPC) and fault tree analysis (FTA). Observations, literature review and expert questionnaires were used for system requirement and knowledge acquisition; scenario simulation was applied to evaluate and validate ITS-TF performance. The results show that traceability requirement is evolved from a firefighting model to a proactive model for enhancing process management capacity for food safety; ITS-TF transforms itself as an intelligent system to provide functions on early warnings and process management by integrated SPC and FTA. The valuable suggestion that automatic data acquisition and communication technology should be integrated into ITS-TF was achieved for further system optimization, perfection and performance improvement. © 2014 Society of Chemical Industry.

Evaluation of power density on the bioethanol production using mesoscale oscillatory baffled reactor and stirred tank reactor

NASA Astrophysics Data System (ADS)

Yussof, H. W.; Bahri, S. S.; Mazlan, N. A.

2018-03-01

A recent development in oscillatory baffled reactor technology is down-scaling the reactor, so that it can be used for production of small-scale bioproduct. In the present study, a mesoscale oscillatory baffled reactor (MOBR) with central baffle system was developed. The reactor performance of the MOBR was compared with conventional stirred tank reactor (STR) to evaluate the performance of bioethanol fermentation using Saccharomyces cerevisiae. Evaluation was made at similar power density of 24.21, 57.38, 112.35 and 193.67 Wm-3 by varying frequency (f), amplitude (xo) and agitation speed (rpm). It was found that the MOBR improved the mixing intensity resulted in lower glucose concentration (0.988 gL-1) and higher bioethanol concentration (38.98 gL-1) after 12 hours fermentation at power density of 193.67 Wm-3. Based on the results, the bioethanol yield obtained using MOBR was 39% higher than the maximum achieved in STR. Bioethanol production using MOBR proved to be feasible as it is not only able to compete with conventional STR but also offers advantages of straight-forward scale-up, whereas it is complicated and difficult in STR. Overall, MOBR offers great prospective over the conventional STR.

National Athletic Trainers' Association Position Statement: Evaluation of Dietary Supplements for Performance Nutrition

PubMed Central

Buell, Jackie L; Franks, Rob; Ransone, Jack; Powers, Michael E; Laquale, Kathleen M; Carlson-Phillips, Amanda

2013-01-01

Objectives To help athletic trainers promote a “food-first” philosophy to support health and performance, understand federal and sport governing body rules and regulations regarding dietary supplements and banned substances, and become familiar with reliable resources for evaluating the safety, purity, and efficacy of dietary supplements. Background The dietary supplement industry is poorly regulated and takes in billions of dollars per year. Uneducated athletes need to gain a better understanding of the safety, eligibility, and efficacy concerns associated with choosing to take dietary supplements. The athletic trainer is a valuable athletic team member who can help in the educational process. In many cases, athletic trainers are asked to help evaluate the legality, safety, and efficacy of dietary supplements. For this position statement, our mission is to provide the athletic trainer with the necessary resources for these tasks. Recommendations Proper nutrition and changes in the athlete's habitual diet should be considered first when improved performance is the goal. Athletes need to understand the level of regulation (or lack thereof) governing the dietary supplement industry at the international, federal, state, and individual sport-participation levels. Athletes should not assume a product is safe simply because it is marketed over the counter. All products athletes are considering using should be evaluated for purity (ie, truth in labeling), safety, and efficacy. PMID:23672334

Cropping system diversification for food production in Mindanao rubber plantations: a rice cultivar mixture and rice intercropped with mungbean

PubMed Central

Elazegui, Francisco; Duque, Jo-Anne Lynne Joy E.; Mundt, Christopher C.; Vera Cruz, Casiana M.

2017-01-01

Including food production in non-food systems, such as rubber plantations and biofuel or bioenergy crops, may contribute to household food security. We evaluated the potential for planting rice, mungbean, rice cultivar mixtures, and rice intercropped with mungbean in young rubber plantations in experiments in the Arakan Valley of Mindanao in the Philippines. Rice mixtures consisted of two- or three-row strips of cultivar Dinorado, a cultivar with higher value but lower yield, and high-yielding cultivar UPL Ri-5. Rice and mungbean intercropping treatments consisted of different combinations of two- or three-row strips of rice and mungbean. We used generalized linear mixed models to evaluate the yield of each crop alone and in the mixture or intercropping treatments. We also evaluated a land equivalent ratio for yield, along with weed biomass (where Ageratum conyzoides was particularly abundant), the severity of disease caused by Magnaporthe oryzae and Cochliobolus miyabeanus, and rice bug (Leptocorisa acuta) abundance. We analyzed the yield ranking of each cropping system across site-year combinations to determine mean relative performance and yield stability. When weighted by their relative economic value, UPL Ri-5 had the highest mean performance, but with decreasing performance in low-yielding environments. A rice and mungbean intercropping system had the second highest performance, tied with high-value Dinorado but without decreasing relative performance in low-yielding environments. Rice and mungbean intercropped with rubber have been adopted by farmers in the Arakan Valley. PMID:28194318

Developing a Planetary Spatial Data Infrastructure for Evaluating Landing Sites and Performing Surface Operations for the Mars 2020 Lander

NASA Astrophysics Data System (ADS)

Fergason, R. L.; Laura, J.; Hare, T. M.; Otero, R.; Edgar, L. A.

2017-12-01

A Spatial Data Infrastructure (SDI) is a robust framework for data and data products, metadata, data access mechanisms, standards, policy, and a user community that helps to define and standardize the data necessary to meet some specified goal. The primary objective of an SDI is to improve communication, to enhance data access, and to aid in identifying gaps in knowledge. We are developing an SDI that describes the foundational data sets and accuracy requirements to evaluate landing site safety, facilitate the successful operation of Terrain Relative Navigation (TRN), and assist in the operation of the rover once it has successfully landed on Mars. Thru current development efforts, an implicit SDI exists for the Mars 2020 mission. An explicit SDI will allow us to identify any potential gaps in knowledge, facilitate communication between the different institutions involved in landing site evaluation and TRN development, and help ensure a smooth transition from landing to surface operations. This SDI is currently relevant to the Mars 2020 rover mission, but can also serve as a means to document current requirements for foundational data products and standards for future landed missions to Mars and other planetary bodies. To generate a Mars 2020-specific SDI, we must first document and rationalize data set and accuracy requirements for evaluating landing sites, performing surface operations, and inventorying Mars 2020 mission needs in terms of an SDI framework. This step will allow us to 1) evaluate and define what is needed for the acquisition of data and the generation and validation of data products, 2) articulate the accuracy and co-registration requirements, and 3) identify needs for data access (and eventual archiving). This SDI document will serve as a means to communicate the existing foundational products, standards that were followed in producing these products, and where and how these products can be accessed by the planetary community. This SDI will also facilitate discussions between the landing and surface operations groups to communicate the available data and identify unique needs to surface operations. Our goal is to continually review and update this SDI throughout the Mars 2020 landing site evaluation and operations, so that it remains relevant and effective as data availability and needs evolve.

Design of two-column batch-to-batch recirculation to enhance performance in ion-exchange chromatography.

PubMed

Persson, Oliver; Andersson, Niklas; Nilsson, Bernt

2018-01-05

Preparative liquid chromatography is a separation technique widely used in the manufacturing of fine chemicals and pharmaceuticals. A major drawback of traditional single-column batch chromatography step is the trade-off between product purity and process performance. Recirculation of impure product can be utilized to make the trade-off more favorable. The aim of the present study was to investigate the usage of a two-column batch-to-batch recirculation process step to increase the performance compared to single-column batch chromatography at a high purity requirement. The separation of a ternary protein mixture on ion-exchange chromatography columns was used to evaluate the proposed process. The investigation used modelling and simulation of the process step, experimental validation and optimization of the simulated process. In the presented case the yield increases from 45.4% to 93.6% and the productivity increases 3.4 times compared to the performance of a batch run for a nominal case. A rapid concentration build-up product can be seen during the first cycles, before the process reaches a cyclic steady-state with reoccurring concentration profiles. The optimization of the simulation model predicts that the recirculated salt can be used as a flying start of the elution, which would enhance the process performance. The proposed process is more complex than a batch process, but may improve the separation performance, especially while operating at cyclic steady-state. The recirculation of impure fractions reduces the product losses and ensures separation of product to a high degree of purity. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of a Proprietary Freeze-Dried Water Extract of Eurycoma longifolia (Physta) and Polygonum minus on Sexual Performance and Well-Being in Men: A Randomized, Double-Blind, Placebo-Controlled Study

PubMed Central

Udani, Jay K.; George, Annie A.; Musthapa, Mufiza; Pakdaman, Michael N.; Abas, Azreena

2014-01-01

Background. Physta is a proprietary product containing a freeze-dried water extract of Eurycoma longifolia (tongkat ali), which is traditionally used as an energy enhancer and aphrodisiac. We aim to evaluate a 300 mg combination of Physta and Polygonum minus, an antioxidant, with regard to sexual performance and well-being in men. Methods. Men that aged 40–65 years were screened for this 12-week randomized, double-blind, placebo-controlled, parallel-group study. Outcome measures included validated questionnaires that aimed to evaluate erectile function, satisfaction with intervention, sexual intercourse performance, erectile hardness, mood, and overall quality of life. Results. 12 subjects in the active group and 14 in the placebo group completed the study. Significant improvements were noted in scores for the Sexual Intercourse Attempt diary, Erection Hardness Scale, Sexual Health Inventory of Men, and Aging Male Symptom scale (P < 0.05 for all). Three adverse events were reported in the active group and four in the placebo group, none of which were attributed to study product. Laboratory evaluations, including liver and kidney function testing, showed no clinically significant abnormality. Conclusion. Supplementation for twelve weeks with Polygonum minus and the proprietary Eurycoma longifolia extract, Physta, was well tolerated and more effective than placebo in enhancing sexual performance in healthy volunteers. PMID:24550993

Effects of a Proprietary Freeze-Dried Water Extract of Eurycoma longifolia (Physta) and Polygonum minus on Sexual Performance and Well-Being in Men: A Randomized, Double-Blind, Placebo-Controlled Study.

PubMed

Udani, Jay K; George, Annie A; Musthapa, Mufiza; Pakdaman, Michael N; Abas, Azreena

2014-01-01

Background. Physta is a proprietary product containing a freeze-dried water extract of Eurycoma longifolia (tongkat ali), which is traditionally used as an energy enhancer and aphrodisiac. We aim to evaluate a 300 mg combination of Physta and Polygonum minus, an antioxidant, with regard to sexual performance and well-being in men. Methods. Men that aged 40-65 years were screened for this 12-week randomized, double-blind, placebo-controlled, parallel-group study. Outcome measures included validated questionnaires that aimed to evaluate erectile function, satisfaction with intervention, sexual intercourse performance, erectile hardness, mood, and overall quality of life. Results. 12 subjects in the active group and 14 in the placebo group completed the study. Significant improvements were noted in scores for the Sexual Intercourse Attempt diary, Erection Hardness Scale, Sexual Health Inventory of Men, and Aging Male Symptom scale (P < 0.05 for all). Three adverse events were reported in the active group and four in the placebo group, none of which were attributed to study product. Laboratory evaluations, including liver and kidney function testing, showed no clinically significant abnormality. Conclusion. Supplementation for twelve weeks with Polygonum minus and the proprietary Eurycoma longifolia extract, Physta, was well tolerated and more effective than placebo in enhancing sexual performance in healthy volunteers.

The simulation of cropping pattern to improve the performance of irrigation network in Cau irrigation area

NASA Astrophysics Data System (ADS)

Wahyuningsih, Retno; Rintis Hadiani, RR; Sobriyah

2017-01-01

Cau irrigation area located in Madiun district, East Java Province, irrigates 1.232 Ha of land which covers Cau primary channel irrigation network, Wungu Secondary channel irrigation network, and Grape secondary channel irrigation network. The problems in Cau irrigation area are limited availability of water especially during the dry season (planting season II and III) and non-compliance to cropping patterns. The evaluation of irrigation system performance of Cau irrigation area needs to be done in order to know how far the irrigation system performance is, especially based on planting productivity aspect. The improvement of irrigation network performance through cropping pattern optimization is based on the increase of water necessity fulfillment (k factor), the realization of planting area and rice productivity. The research method of irrigation system performance is by analyzing the secondary data based on the Regulation of Ministry of Public Work and State Minister for Public Housing Number: 12/PRT/M/2015. The analysis of water necessity fulfillment (k factor) uses Public Work Plan Criteria Method. The performance level of planting productivity aspect in existing condition is 87.10%, alternative 1 is 93.90% dan alternative 2 is 96.90%. It means that the performance of the irrigation network from productivity aspect increases 6.80% for alternative 1 and 9.80% for alternative 2.

Qualitative and quantitative evaluation of a local lymph node assay based on ex vivo interleukin-2 production.

PubMed

Azam, Philippe; Peiffer, Jean-Luc; Ourlin, Jean-Claude; Bonnet, Pierre-Antoine; Tissier, Marie-Hélène; Vian, Laurence; Fabre, Isabelle

2005-01-15

The local lymph node assay (LLNA) is a regular method for the detection of sensitizing chemicals in mice which measures the incorporation of tritiated thymidine in lymph node cells. We have evaluated an alternative to this method based on the interleukin-2 (IL-2) production of lymph node cells. At the mRNA level, no change in the IL-2 gene expression level was detected by real-time PCR analysis. At the protein level, various experimental conditions were checked in order to improve the irritant versus sensitizer discrimination with a restricted set of prototypic compounds. In particular, the use of phytohemagglutinin A (PHA) in an ex vivo cell culture step showed an improvement of both signal and discrimination. In these optimised conditions, a panel of irritants and potency-graded sensitizers was used to assess the performance of the modified method. IFN-gamma production was used as a positive control. For each compound, a dose-response was performed and stimulation indexes (SI) were determined. Effective concentrations (EC) for each sensitizers were then extracted and compared to the literature data of the regular LLNA. The IL-2-based LLNA showed similar performances at both qualitative and quantitative levels compared to regular LLNA.

SWOT Oceanography and Hydrology Data Product Simulators

NASA Technical Reports Server (NTRS)

Peral, Eva; Rodriguez, Ernesto; Fernandez, Daniel Esteban; Johnson, Michael P.; Blumstein, Denis

2013-01-01

The proposed Surface Water and Ocean Topography (SWOT) mission would demonstrate a new measurement technique using radar interferometry to obtain wide-swath measurements of water elevation at high resolution over ocean and land, addressing the needs of both the hydrology and oceanography science communities. To accurately evaluate the performance of the proposed SWOT mission, we have developed several data product simulators at different levels of fidelity and complexity.

[Experimental study of proflavine acetate phototransformation processes].

PubMed

Zholdakova, Z I; Sinitsyna, O O; Lebedev, A T; Kharchevnikova, N V

2009-01-01

Changes in proflavine acetate phototransformation processes upon exposure to visible-range irradiation were studied by high performance liquid chromatography. Proflavine acetate was offered as a photosensitizer during photodynamic water disinfection. Dye transformation products upon time-varying exposure to irradiation were identified. By using structure-activity relationships and information from toxicity databases, the authors evaluated the hazard of the identified products and identified the most hazardous ones.

Effect of heating system using a geothermal heat pump on the production performance and housing environment of broiler chickens.

PubMed

Choi, H C; Salim, H M; Akter, N; Na, J C; Kang, H K; Kim, M J; Kim, D W; Bang, H T; Chae, H S; Suh, O S

2012-02-01

A geothermal heat pump (GHP) is a potential heat source for the economic heating of broiler houses with optimum production performance. An investigation was conducted to evaluate the effect of a heating system using a GHP on production performance and housing environment of broiler chickens. A comparative analysis was also performed between the GHP system and a conventional heating system that used diesel for fuel. In total, 34,000 one-day-old straight run broiler chicks were assigned to 2 broiler houses with 5 replicates in each (3,400 birds/replicate pen) for 35 d. Oxygen(,) CO(2), and NH(3) concentrations in the broiler house, energy consumption and cost of heating, and production performance of broilers were evaluated. Results showed that the final BW gain significantly (P < 0.05) increased when chicks were reared in the GHP broiler house compared with that of chicks reared in the conventional broiler house (1.73 vs. 1.62 kg/bird). The heating system did not affect the mortality of chicks during the first 4 wk of the experimental period, but the mortality markedly increased in the conventional broiler house during the last wk of the experiment. Oxygen content in the broiler house during the experimental period was not affected by the heating system, but the CO(2) and NH(3) contents significantly increased (P < 0.05) in the conventional broiler house compared with those in the GHP house. Fuel consumption was significantly reduced (P < 0.05) and electricity consumption significantly increased (P < 0.05) in the GHP house compared with the consumption in the conventional house during the experiment. The total energy cost of heating the GHP house was significantly lower (P < 0.05) compared with that of the conventional house. It is concluded that a GHP system could increase the production performance of broiler chicks due to increased inside air quality of the broiler house. The GHP system had lower CO(2) and NH(3) emissions with lower energy cost than the conventional heating system for broiler chickens.

Medical-device risk management and public safety: using cost-benefit as a measurement of effectiveness

NASA Astrophysics Data System (ADS)

Hughes, Allen A.

1994-12-01

Public safety can be enhanced through the development of a comprehensive medical device risk management. This can be accomplished through case studies using a framework that incorporates cost-benefit analysis in the evaluation of risk management attributes. This paper presents a framework for evaluating the risk management system for regulatory Class III medical devices. The framework consists of the following sixteen attributes of a comprehensive medical device risk management system: fault/failure analysis, premarket testing/clinical trials, post-approval studies, manufacturer sponsored hospital studies, product labeling, establishment inspections, problem reporting program, mandatory hospital reporting, medical literature surveillance, device/patient registries, device performance monitoring, returned product analysis, autopsy program, emergency treatment funds/interim compensation, product liability, and alternative compensation mechanisms. Review of performance histories for several medical devices can reveal the value of information for many attributes, and also the inter-dependencies of the attributes in generating risk information flow. Such an information flow network is presented as a starting point for enhancing medical device risk management by focusing on attributes with high net benefit values and potential to spur information dissemination.

Microbial barrier assessment of Tyvek stopper packaging for rubber closures.

PubMed

Moldenhauer, J E; Bass, S A; Kupinski, M J; Walters, M L; Rubio, S L

1996-01-01

Two types of Tyvek and high density polyethylene or polypropylene packaging used for sterilization of rubber closures were evaluated for Microbial Barrier properties. The packaging evaluated was "Ready to Sterilize" (1) stoppers and a second test package (Test 2) which was designated as appropriate for a clean room, filled with washed and siliconized stoppers and then heat sealed. Each type of packaging was subjected to three different sterilization temperatures (125 degrees C, 128 degrees C and 131 degrees C) in a production sterilizer (15-18 psi). Following sterilization, a microbial barrier assessment was performed, using Bacillus subtilis niger (ATCC 9372), to determine whether the packaging could maintain a sterile barrier following sterilization. Results of the testing indicated that a microbial barrier was maintained for products in "Ready to Sterilize" packages at 125 degrees C and 128 degrees C. For products sterilized in the Test 2 container a microbial barrier could not be maintained at 128 degrees C, and no further testing was performed. Following sterilization at 131 degrees C physical defects were noted for the "Ready to Sterilize" bag and a microbial barrier could not be maintained.

Permeability of tritiated water through human cervical and vaginal tissue.

PubMed

Sassi, Alexandra B; McCullough, Kristy D; Cost, Marilyn R; Hillier, Sharon L; Rohan, Lisa Cencia

2004-08-01

The increased incidence of human immunodeficiency virus infection in women has identified an urgent need to develop a female-controlled method to prevent acquisition of human immunodeficiency virus and other sexually transmitted diseases. Women would apply the product intravaginally before intercourse. Development of such a product requires a better understanding of the permeability characteristics of the tissues with which such products would come into contact. However, limited studies have been performed in this area. In the present study, water permeability of fresh human cervical and vaginal tissue was evaluated. The average apparent permeability coefficient was found to be 8 x 10(-5) cm/s for fresh human cervical tissue and 7 x 10(-5) cm/s for fresh human vaginal tissue. Considering the lack of regularity in obtaining cervical and vaginal tissue from surgical specimens, additional tests were performed to evaluate the effect of freezing on tritiated water permeability. No statistically significant differences were observed in the permeability values obtained when comparing fresh versus frozen tissues. Copyright 2004 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 93:2009-2016, 2004

Evaluation of Biodiesel Production, Engine Performance, and Emissions

NASA Astrophysics Data System (ADS)

Gürü, Metin; Keskïn, Ali

2016-08-01

Nowadays, to decrease environmental pollution and dependence on fossil-based fuels, research on alternative renewable energy sources has been increasing. One such renewable energy source is biodiesel, which is used as an alternative fuel for diesel engines. Biodiesel is renewable, nontoxic, biodegradable, and environmentally friendly. Biodiesel is domestically produced from vegetable oil (edible or nonedible), animal fat, and used cooking oils. In the biodiesel production process, oil or fat undergoes transesterification reaction through use of simple alcohols such as methanol, ethanol, propanol, butanol, etc. Use of methanol is most feasible because of its low cost, and physical and chemical advantages. Acid catalysis, alkali catalysis, and enzyme catalysis are usually used to improve the reaction rate and yield. Glycerol is a byproduct of the reaction and can be used as an industrial raw material. In this study, biodiesel production methods (direct use, pyrolysis, microemulsion, transesterification, supercritical processes, ultrasound- assisted, and microwave-assisted) and types of catalyst (homogeneous, heterogeneous, and enzyme) have been evaluated and compared. In addition, the effects of biodiesel and its blends on diesel engine performance and exhaust emissions are described and reviewed.

[HERA-QUEST: HTA evaluation of generic pharmaceutical products to improve quality, economic efficiency, patient safety and transparency in drug product changes in hospitals].

PubMed

Gyalrong-Steur, Miriam; Kellermann, Anita; Bernard, Rudolf; Berndt, Georg; Bindemann, Meike; Nusser-Rothermundt, Elfriede; Amann, Steffen; Brakebusch, Myga; Brüggmann, Jörg; Tydecks, Eva; Müller, Markus; Dörje, Frank; Kochs, Eberhard; Riedel, Rainer

2017-04-01

In view of the rising cost pressure and an increasing number of drug shortages, switches between generic drug preparations have become a daily routine in hospitals. To ensure consistently high treatment quality and best possible patient safety, the equivalence of the new and the previous drug preparation must be ensured before any change in the purchase of pharmaceutical products takes place. So far, no easily usable, transparent and standardized instrument for this kind of comparison between generic drug products has been available. A group of pharmaceutical experts has developed the drug HTA (health technology assessment) model "HERA" (HTA Evaluation of geneRic phArmaceutical products) through a multi-step process. The instrument is designed to perform both a qualitative and economic comparison of equivalent drug preparations ("aut idem" substitution) before switching products. The economic evaluation does not only consider unit prices and consumption quantity, but also the processing costs associated with a product change process. The qualitative comparison is based on the evaluation of 34 quality criteria belonging to six evaluation fields (e.g., approval status, practical handling, packaging design). The objective evaluation of the quality criteria is complemented by an assessment of special features of the individual hospital for complex drug switches, including the feedback of the physicians utilizing the drug preparation. Thus potentially problematic switches of pharmaceutical products can be avoided at the best possible rate, contributing to the improvement of patient safety. The novel drug HTA model HERA is a tool used in clinical practice that can add to an increase in quality, therapeutic safety and transparency of drug use while simultaneously contributing to the economic optimization of drug procurement in hospitals. Combining these two is essential for hospitals facing the tension between rising cost pressure and at the same time increasing demands on quality and transparency, triggered by, amongst others, current legislation (Hospital Structures Act, anti-corruption legislation). Copyright © 2017. Published by Elsevier GmbH.

Utilization of potatoes for life support in space. V. Evaluation of cultivars in response to continuous light and high temperature

NASA Technical Reports Server (NTRS)

Tibbitts, T. W.; Cao, W.; Bennett, S. M.

1992-01-01

Twenty-four potato (Solanum tuberosum L.) cultivars from different regions of the world were evaluated in terms of their responses to continuous light (24 h photoperiod) and to high temperature (30 C) in two separate experiments under controlled environments. In each experiment, a first evaluation of the cultivars was made at day 35 after transplanting, at which time 12 cultivars exhibiting best growth and tuber initiation were selected. A final evaluation of the 12 cultivars was made after an additional 21 days of growth, at which time plant height, total dry weight, tuber dry weight, and tuber number were determined. In the continuous light evaluation, the 12 selected cultivars were Alaska 114, Atlantic, Bintje, Denali, Desiree, Haig, New York 81, Ottar, Rutt, Snogg, Snowchip, and Troll. In the high temperature evaluation, the 12 selected cultivars were Alpha, Atlantic, Bake King, Denali, Desiree, Haig, Kennebec, Norland, Russet Burbank, Rutt, Superior, and Troll. Among the cultivars selected under continuous irradiation, Desiree, Ottar, Haig, Rutt, Denali and Alaska showed the best potential for high productivity whereas New York 81 and Bintje showed the least production capability. Among the cultivars selected under high temperature, Rutt, Haig, Troll and Bake King had best performance whereas Atlantic, Alpha, Kennebec and Russet Burbank exhibited the least production potential. Thus, Haig and Rutt were the two cultivars that performed well under continuous irradiation and high temperature conditions, and could have maximum potential for adaptation to varying stress environments. These two cultivars may have the best potential for use in future space farming in which continuous light and/or high temperature conditions may exist. However, cultivar responses under combined conditions of continuous light and high temperature remains for further validation.

Biosurfactant production by Bacillus subtilis using corn steep liquor as culture medium

PubMed Central

Gudiña, Eduardo J.; Fernandes, Elisabete C.; Rodrigues, Ana I.; Teixeira, José A.; Rodrigues, Lígia R.

2015-01-01

In this work, biosurfactant production by Bacillus subtilis #573 was evaluated using corn steep liquor (CSL) as culture medium. The best results were obtained in a culture medium consisting of 10% (v/v) of CSL, with a biosurfactant production of about 1.3 g/l. To the best of our knowledge, this is the first report describing biosurfactant production by B. subtilis using CSL as culture medium. Subsequently, the effect of different metals (iron, manganese, and magnesium) on biosurfactant production was evaluated using the medium CSL 10%. It was found that for all the metals tested, the biosurfactant production was increased (up to 4.1, 4.4, and 3.5 g/l for iron, manganese, and magnesium, respectively). When the culture medium was supplemented with the optimum concentration of the three metals simultaneously, the biosurfactant production was increased up to 4.8 g/l. Furthermore, the biosurfactant exhibited a good performance in oil recovery assays when compared with chemical surfactants, which suggests its possible application in microbial enhanced oil recovery or bioremediation. PMID:25705209

Disposable Electronic Cigarettes and Electronic Hookahs: Evaluation of Performance

PubMed Central

Williams, Monique; Ghai, Sanjay

2015-01-01

Introduction: The purpose of this study was to characterize the performance of disposable button-activated and disposable airflow-activated electronic cigarettes (EC) and electronic hookahs (EH). Methods: The airflow rate required to produce aerosol, pressure drop, and the aerosol absorbance at 420nm were measured during smoke-outs of 9 disposable products. Three units of each product were tested in these experiments. Results: The airflow rates required to produce aerosol and the aerosol absorbances were lower for button-activated models (3mL/s; 0.41–0.55 absorbance) than for airflow-activated models (7–17mL/s; 0.48–0.84 absorbance). Pressure drop was also lower across button-activated products (range = 6–12mm H2O) than airflow-activated products (range = 15–67mm H20). For 25 of 27 units tested, airflow did not have to be increased during smoke-out to maintain aerosol production, unlike earlier generation models. Two brands had uniform performance characteristics for all parameters, while 3 had at least 1 product that did not function normally. While button-activated models lasted 200 puffs or less and EH airflow-activated models often lasted 400 puffs, none of the models produced as many puffs as advertised. Puff number was limited by battery life, which was shorter in button-activated models. Conclusion: The performance of disposable products was differentiated mainly by the way the aerosol was produced (button vs airflow-activated) rather than by product type (EC vs EH). Users needed to take harder drags on airflow-activated models. Performance varied within models, and battery life limited the number of puffs. Data suggest quality control in manufacturing varies among brands. PMID:25104117

Evolution of Multidisciplinary Translational Teams (MTTs): Insights for Accelerating Translational Innovations

PubMed Central

Calhoun, William J.; Bhavnani, Suresh; Rose, Robert M.; Ameredes, Bill; Brasier, Allan R.

2015-01-01

Abstract There is growing consensus about the factors critical for development and productivity of multidisciplinary teams, but few studies have evaluated their longitudinal changes. We present a longitudinal study of 10 multidisciplinary translational teams (MTTs), based on team process and outcome measures, evaluated before and after 3 years of CTSA collaboration. Using a mixed methods approach, an expert panel of five judges (familiar with the progress of the teams) independently rated team performance based on four process and four outcome measures, and achieved a rating consensus. Although all teams made progress in translational domains, other process and outcome measures were highly variable. The trajectory profiles identified four categories of team performance. Objective bibliometric analysis of CTSA‐supported MTTs with positive growth in process scores showed that these teams tended to have enhanced scientific outcomes and published in new scientific domains, indicating the conduct of innovative science. Case exemplars revealed that MTTs that experienced growth in both process and outcome evaluative criteria also experienced greater innovation, defined as publications in different areas of science. Of the eight evaluative criteria, leadership‐related behaviors were the most resistant to the interventions introduced. Well‐managed MTTs demonstrate objective productivity and facilitate innovation. PMID:25801998

Evolution of Multidisciplinary Translational Teams (MTTs): Insights for Accelerating Translational Innovations.

PubMed

Wooten, Kevin C; Calhoun, William J; Bhavnani, Suresh; Rose, Robert M; Ameredes, Bill; Brasier, Allan R

2015-10-01

There is growing consensus about the factors critical for development and productivity of multidisciplinary teams, but few studies have evaluated their longitudinal changes. We present a longitudinal study of 10 multidisciplinary translational teams (MTTs), based on team process and outcome measures, evaluated before and after 3 years of CTSA collaboration. Using a mixed methods approach, an expert panel of five judges (familiar with the progress of the teams) independently rated team performance based on four process and four outcome measures, and achieved a rating consensus. Although all teams made progress in translational domains, other process and outcome measures were highly variable. The trajectory profiles identified four categories of team performance. Objective bibliometric analysis of CTSA-supported MTTs with positive growth in process scores showed that these teams tended to have enhanced scientific outcomes and published in new scientific domains, indicating the conduct of innovative science. Case exemplars revealed that MTTs that experienced growth in both process and outcome evaluative criteria also experienced greater innovation, defined as publications in different areas of science. Of the eight evaluative criteria, leadership-related behaviors were the most resistant to the interventions introduced. Well-managed MTTs demonstrate objective productivity and facilitate innovation. © 2015 Wiley Periodicals, Inc.

Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herk, Anastasia

This project was created from a partnership between the U.S. Department of Energy’s (DOE’s) Building America research team IBACOS, Inc. and Imagine Homes, a production homebuilder of high-performance homes in San Antonio, Texas—a hot-humid climate. The primary purpose was to evaluate the performance of a multihead mini-split heat pump (MSHP) space-conditioning system, which consists of ducted and ductless indoor units, in maintaining uniform comfort in an occupied test house. The research team evaluated the MSHP space-conditioning strategy for its effectiveness in achieving uniform temperature and relative humidity (RH) levels throughout the test house and for overall constructability and cost. Thismore » evaluation was based on data that were collected from short-term tests and monitoring during 1 year of occupancy, as well as from builder and occupant feedback. Design considerations for integrating an MSHP system into the builder’s full range of production home designs were also explored, with a focus on minimizing the cost and complexity of the system design while meeting the thermal loads of the house and providing occupant comfort according to ANSI/ASHRAE Standard 55-2010 (ASHRAE 2010a).« less

A comparative analysis of well-to-wheel primary energy demand and greenhouse gas emissions for the operation of alternative and conventional vehicles in Switzerland, considering various energy carrier production pathways

NASA Astrophysics Data System (ADS)

Yazdanie, Mashael; Noembrini, Fabrizio; Dossetto, Lionel; Boulouchos, Konstantinos

2014-03-01

This study provides a comprehensive analysis of well-to-wheel (WTW) primary energy demand and greenhouse gas (GHG) emissions for the operation of conventional and alternative passenger vehicle drivetrains. Results are determined based on a reference vehicle, drivetrain/production process efficiencies, and lifecycle inventory data specific to Switzerland. WTW performance is compared to a gasoline internal combustion engine vehicle (ICEV). Both industrialized and novel hydrogen and electricity production pathways are evaluated. A strong case is presented for pluggable electric vehicles (PEVs) due to their high drivetrain efficiency. However, WTW performance strongly depends on the electricity source. A critical electricity mix can be identified which divides optimal drivetrain performance between the EV, ICEV, and plug-in hybrid vehicle. Alternative drivetrain and energy carrier production pathways are also compared by natural resource. Fuel cell vehicle (FCV) performance proves to be on par with PEVs for energy carrier (EC) production via biomass and natural gas resources. However, PEVs outperform FCVs via solar energy EC production pathways. ICE drivetrains using alternative fuels, particularly biogas and CNG, yield remarkable WTW energy and emission reductions as well, indicating that alternative fuels, and not only alternative drivetrains, play an important role in the transition towards low-emission vehicles in Switzerland.

Plasma metallurgical production of nanocrystalline borides and carbides

NASA Astrophysics Data System (ADS)

Galevsky, G. V.; Rudneva, V. V.; Cherepanov, A. N.; Galevsky, S. G.; Efimova, K. A.

2016-09-01

he experience in production and study of properties of nanocrystalline borides and chromium carbides, titanium, silicon was summarized. The design and features of the vertical three-jet once-through reactor with power 150 kW, used in the plasma metallurgical production, was described. The technological, thermotechnical and resource characteristics of the reactor were identified. The parameters of borides and carbides synthesis, their main characteristics in the nanodispersed state and equipment-technological scheme of production were provided. Evaluation of engineering-and-economical performance of the laboratory and industrial levels of borides and carbides production and the state corresponding to the segment of the world market was carried out.

Effects of adding aqueous extract of Tribulus terrestris to diet on productive performance, egg quality characteristics, and blood biochemical parameters of laying hens reared under low ambient temperature (6.8 ± 3 °C)

NASA Astrophysics Data System (ADS)

Akbari, Mohsen; Torki, Mehran

2016-06-01

A study was conducted using 144 laying hens to evaluate the effects of adding aqueous extract of Tribulus terrestris to diets on productive performance, egg quality traits, and some blood parameters of laying hens reared under cold stress condition (6.8 ± 3 °C). The birds were randomly assigned to each of four dietary treatments (C, T1, T2, and T3) with six replicate cages of six birds. Diet inclusion of aqueous extract of T. terrestris at the rate of 10, 20, and 30 ml/Lit offered to groups T1, T2, and T3, respectively, while group C served as the control diet with no addition. Feed intake (FI), feed conversion ratio (FCR), egg weight (EW), egg production (EP), and egg mass (EM) were evaluated during the 42-day trial period. The EP and EM increased, whereas FCR decreased ( P < 0.001) in the hens fed the extract-included diet as compared to those fed the basal diet. The serum content of cholesterol decreased and the thickness of egg shell increased in the hens fed the T2 and T3 diet compared to those fed the basal diet. Overall from the results of the present experiment, it can be concluded that diet supplementation with aqueous extract of T. terrestris has beneficial effects on productive performance of laying hens reared under cold stress condition.

ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM; BAGHOUSE FILTRATION PRODUCTS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

Evaluation of an autochthonous starter culture on the production of a traditional dry fermented sausage from Chaco (Argentina) at a small-scale facility.

PubMed

Palavecino Prpich, Noelia Z; Garro, Oscar A; Romero, Mara; Judis, María A; Cayré, María E; Castro, Marcela P

2016-05-01

The performance of a mixed starter culture, SAS-1, comprised of the autochthonous strains Lactobacillus sakei ACU-2 and Staphylococcus vitulinus ACU-10, was evaluated into the production process of a traditional dry sausage. Microbiological, physicochemical and sensory analyses were carried out to accomplish this goal. Results showed an improvement in performance through the introduction of SAS-1; adding mixed starter culture rapidly decreased pH, inhibited the growth of contaminant microorganisms and enhanced the beneficial ones, diminished TBARS, and highlighted color and aroma attributes. However, most influential organoleptic descriptors among consumer acceptance were not affected by the addition of the starter. This starter culture would represent a valuable tool to improve the homogeneity of artisanal manufacture of this traditional food. Copyright © 2016 Elsevier Ltd. All rights reserved.

Operational Evaluation of VEGGIE Food Production System in the Habitat Demonstration Unit

NASA Technical Reports Server (NTRS)

Stutte, Gary W.; Newsham, Gerard; Morrow, Robert M.; Wheeler, Raymond M.

2011-01-01

The 2010 Desert Research and Technology Studies (DRATS) of the VEGGIE Food Production System in the Habitat Demonstration Unit (HDU) Pressurized Excursion Module (PEM) was the first operational evaluation of salad crop production technology in a NASA analog test. A systematic evaluation of rooting media and nutrient delivery systems were evaluated for three lettuce cultivars that have shown promise as candidates for a surface based food production system. The VEGGIE nutrient delivery system worked well, was able to be maintained by multiple operators with a minimum of training, and supported excellent lettuce growth for the duration of the test. A Hazard Analysis and Critical Control Point (HACCP) evaluation was performed using ProSan(tm) as sanitation agent prior to consumption was approved, and the crew was allowed to consume the lettuce grown using the VEGGIE light cap and gravity based nutrient delivery system at the completion of the 14-day DRAT field test. The DRAT field test validated the crew operations; Growth of all lettuce cultivars was excellent. The operational DRAT field testing in the HDU identified light quality issues related to morphology and pigment development that will need to be addressed through additional testing. Feedback from the crew, ground support personnel, and human factors leads was uniformly positive on the psychological value of having the crop production system in the excursion module. A number of areas have been identified for future work, to minimize the "footprint" of the Food Production system through creative use of unused wall and floor space in the unit.

Operation Evaluation of the VEGGIE Food Production System in the Habitat Demonstration Unit

NASA Technical Reports Server (NTRS)

Stutte, Gary W.; Newsham, Gerard; Morrow, Robert M.; Wheeler, Raymond M.

2011-01-01

The 2010 Desert Research and Technology Studies (DRATS) of the VEGGIE Food Production System in the Habitat Demonstration Unit (HDU) Pressurized Excursion Module (PEM) was the first operational evaluation of salad crop production technology in a NASA analog test. A systematic evaluation of rooting media and nutrient delivery systems were evaluated for three lettuce cultivars that have shown promise as candidates for a surface based food production system. The VEGGIE nutrient delivery system worked well, was able to be maintained by multiple operators with a minimum of training, and supported excellent lettuce growth for the duration of the test. A Hazard Analysis and Critical Control Point (HACCP) evaluation was performed using ProSantm as sanitation agent prior to consumption was approved, and the crew was allowed to consume the lettuce grown using the VEGGIE light cap and gravity based nutrient delivery system at the completion of the 14-day DRAT field test. The DRAT field test validated the crew operations; Growth of all lettuce cultivars was excellent. The operational DRAT field testing in the HDU identified light quality issues related to morphology and pigment development that will need to be addressed through additional testing. Feedback from the crew, ground support personnel, and human factors leads was uniformly positive on the psychological value of having the crop production system in the excursion module. A number of areas have been identified for future work, to minimize the "footprint" of the Food Production system through creative use of unused wall and floor space in the unit.

Verification System: First System-Wide Performance Test

NASA Astrophysics Data System (ADS)

Chernobay, I.; Zerbo, L.

2006-05-01

System-wide performance tests are essential for the development, testing and evaluation of individual components of the verification system. In addition to evaluating global readiness it helps establishing the practical and financial requirements for eventual operations. The first system-wide performance test (SPT1) was conducted in three phases: - A preparatory phase in May-June 2004 - A performance testing phase in April-June 2005 - An evaluation phase in the last half of 2005. The preparatory phase was developmental in nature. The main objectives for the performance testing phase included establishment of performance baseline under current provisional mode of operation (CTBT/PC- 19/1/Annex II, CTBT/WGB-21/1), examination of established requirements and procedures for operation and maintenance. To establish a system-wide performance baseline the system configuration was fixed for April-May 2005. The third month (June 2005) was used for implementation of 21 test case scenarios to examine either particular operational procedures or the response of the system components to the failures simulated under controlled conditions. A total of 163 stations and 5 certified radionuclide laboratories of International Monitoring System (IMS) participated in the performance testing phase - about 50% of the eventual IMS network. 156 IMS facilities and 40 National Data Centres (NDCs) were connected to the International Data Centre (IDC) via Global Communication Infrastructure (GCI) communication links. In addition, 12 legacy stations in the auxiliary seismic network sent data to the IDC over the Internet. During the performance testing phase, the IDC produced all required products, analysed more than 6100 seismic events and 1700 radionuclide spectra. Performance of all system elements was documented and analysed. IDC products were compared with results of data processing at the NDCs. On the basis of statistics and information collected during the SPT1 a system-wide performance baseline under current guidelines for provisional Operation and Maintenance was established. The test provided feedback for further development of the draft IMS and IDC Operational Manuals and identified priority areas for further system development.

Gas-cooled reactor programs. High-temperature gas-cooled reactor technology development program. Annual progress report, December 31, 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasten, P.R.; Rittenhouse, P.L.; Bartine, D.E.

1984-06-01

ORNL continues to make significant contributions to the national program. In the HTR fuels area, we are providing detailed statistical information on the fission product retention performance of irradiated fuel. Our studies are also providing basic data on the mechanical, physical, and chemical behavior of HTR materials, including metals, ceramics, graphite, and concrete. The ORNL has an important role in the development of improved HTR graphites and in the specification of criteria that need to be met by commercial products. We are also developing improved reactor physics design methods. Our work in component development and testing centers in the Componentmore » Flow Test Loop (CFTL), which is being used to evaluate the performance of the HTR core support structure. Other work includes experimental evaluation of the shielding effectiveness of the lower portions of an HTR core. This evaluation is being performed at the ORNL Tower Shielding Facility. Researchers at ORNL are developing welding techniques for attaching steam generator tubing to the tubesheets and are testing ceramic pads on which the core posts rest. They are also performing extensive testing of aggregate materials obtained from potential HTR site areas for possible use in prestressed concrete reactor vessels. During the past year we continued to serve as a peer reviewer of small modular reactor designs being developed by GA and GE with balance-of-plant layouts being developed by Bechtel Group, Inc. We have also evaluated the national need for developing HTRs with emphasis on the longer term applications of the HTRs to fossil conversion processes.« less

Combining usability evaluations to highlight the chain that leads from usability flaws to usage problems and then negative outcomes.

PubMed

Watbled, Ludivine; Marcilly, Romaric; Guerlinger, Sandra; Bastien, J-M Christian; Beuscart-Zéphir, Marie-Catherine; Beuscart, Régis

2018-02-01

Poor usability of health technology is thought to diminish work system performance, increase error rates and, potentially, harm patients. The present study (i) used a combination of usability evaluation methods to highlight the chain that leads from usability flaws to usage problems experienced by users and, ultimately, to negative patient outcomes, and (ii) validated this approach by studying two different discharge summary production systems. To comply with quality guidelines, the process of drafting and sending discharge summaries is increasingly being automated. However, the usability of these systems may modify their impact (or the absence thereof) in terms of production times and quality, and must therefore be evaluated. Here, we applied three successive techniques for usability evaluation (heuristic evaluation, user testing and field observation) to two discharge summary production systems (underpinned by different technologies). The systems' main usability flaws led respectively to an increase in the time need to produce a discharge summary and the risk of patient misidentification. Our results are discussed with regard to the possibility of linking the usability flaws, usage problems and the negative outcomes by successively applying three methods for evaluating usability (heuristic evaluation, user testing and in situ observations) throughout the system development life cycle. Copyright © 2018 Elsevier Inc. All rights reserved.

Evaluation of Commonly Used Products for Disinfecting Clipper Blades in Veterinary Practices: A Pilot Study.

PubMed

Ley, Benjamin; Silverman, Edward; Peery, Kara; Dominguez, Delfina

2016-01-01

Nosocomial infections are a concern of growing interest in veterinary medicine. Clipper blades have been confirmed as fomites for numerous potential pathogens and, as such, may be associated with wound and surgical site infections. The goal of this study was to evaluate the disinfectant capabilities of several commonly used clipper blade cleaning products. Seventy sterile clipper blades were inoculated with strains of Pseudomonas aeruginosa , Escherichia coli , and Staphylococcus aureus . Blades were then subjected to one of seven treatment groups for disinfecting. Quantitative cultures of remaining bacteria were performed. All blades in the control group showed large amounts of bacterial recovery. Culture results showed no recovery in blades soaked in alcohol or chlorhexidine or those sprayed with an ethanol/o-phenylphenol product, while moderate recovery was seen with all other treatments. These results show that persistent contamination of clipper blades can occur with the use of several commonly used disinfectant products. Further research is necessary to evaluate fungicidal capabilities as well as the effect of disinfection on clipper blade maintenance.

Glycerol-based sterilization bioindicator system from Bacillus atrophaeus: development, performance evaluation, and cost analysis.

PubMed

Sella, Sandra R B R; Gouvea, Patricia Milla; Gomes, Vanessa F; Vandenberghe, Luciana P S; Minozzo, João Carlos; Soccol, Carlos Ricardo

2013-02-01

The development of new value-added applications for glycerol is of worldwide interest because of the environmental and economic problems that may be caused by an excess of glycerol generated from biodiesel production. A novel use of glycerol as a major substrate for production of a low-cost sterilization biological indicator system (BIS; spores on a carrier plus a recovery medium) was investigated. A sequential experimental design strategy was applied for product development and optimization. The proposed recovery medium enables germination and outgrowth of heat-damaged spores, promoting a D (160 °C) value of 6.6 ± 0.1 min. Bacillus atrophaeus spores production by solid-state fermentation reached a 2.3 ± 1.2 × 10(8) CFU/g dry matter. Sporulation kinetics results allowed this process to be restricted in 48 h. Germination kinetics demonstrated the visual identification of nonsterile BIS within 24 h. Performance evaluation of the proposed BIS against dry-heat and ethylene oxide sterilization showed compliance with the regulatory requirements. Cost breakdowns were from 41.8 (quality control) up to 72.8 % (feedstock). This is the first report on sterilization BIS production that uses glycerol as a sole carbon source, with significant cost reduction and the profitable use of a biodiesel byproduct.

Evaluation of the structural, physicochemical, and biological characteristics of SB4, a biosimilar of etanercept

PubMed Central

Cho, Ick Hyun; Lee, Nayoung; Song, Dami; Jung, Seong Young; Bou-Assaf, George; Sosic, Zoran; Zhang, Wei; Lyubarskaya, Yelena

2016-01-01

ABSTRACT A biosimilar is a biological medicinal product that is comparable to a reference medicinal product in terms of quality, safety, and efficacy. SB4 was developed as a biosimilar to Enbrel® (etanercept) and was approved as Benepali®, the first biosimilar of etanercept licensed in the European Union (EU). The quality assessment of SB4 was performed in accordance with the ICH comparability guideline and the biosimilar guidelines of the European Medicines Agency and Food and Drug Administration. Extensive structural, physicochemical, and biological testing was performed with state-of-the-art technologies during a side-by-side comparison of the products. Similarity of critical quality attributes (CQAs) was evaluated on the basis of tolerance intervals established from quality data obtained from more than 60 lots of EU-sourced and US-sourced etanercept. Additional quality assessment was focused on a detailed investigation of immunogenicity-related quality attributes, including hydrophobic variants, high-molecular-weight (HMW) species, N-glycolylneuraminic acid (NGNA), and α-1,3-galactose. This comprehensive characterization study demonstrated that SB4 is highly similar to the reference product, Enbrel®, in structural, physicochemical, and biological quality attributes. In addition, the levels of potential immunogenicity-related quality attributes of SB4 such as hydrophobic variants, HMW aggregates, and α-1,3-galactose were less than those of the reference product. PMID:27246928

Ten-year growth in the scientific production of Brazilian Psychiatry: the impact of the new evaluation policies.

PubMed

Gerolin, Jerônimo; Bressan, Rodrigo A; Pietrobon, Ricardo; Mari, Jair de Jesus

2010-03-01

Developed by the Ministry of Education, the Qualis evaluation criteria have strongly impacted the scientific production of Post-Graduation Programs. A new set of more stringent criteria has been proposed for Qualis. Our aim was to evaluate the impact of the new Qualis criteria on the scientific production of Post-Graduation Programs in psychiatry over the last 10 years. We extracted data from annual reports published between 1998 and 2008, and compared performance measured in terms of the old Qualis rating criteria and the new set of criteria. There was a 25% increase in the number of Information Science Institute-indexed articles in the second five-year period, which rose from 1,213 to 1,518. While, according to the old Qualis criteria, 84% of the Information Science Institute production would have been classified as highly-rated (IF > 1), only 17% of the papers were classified as highly-rated (A1) according to the new Qualis rating criteria. Most papers (65%) were assigned to intermediate categories (B1 and B2) with an IF < 2.29. All psychiatric Post-Graduation Programs have increased their production, but by favoring quality over quantity, the new rules have proved to be more useful for discriminating among the scientific production.

Bioleach: a mathematical model for the joint evaluation of leachate and biogas production in urban solid waste landfills

NASA Astrophysics Data System (ADS)

Rodrigo-Clavero, Maria-Elena; Rodrigo-Ilarri, Javier

2017-04-01

One of the most serious environmental problems in modern societies is the management and disposal of urban solid waste (MSW). Despite the efforts of the administration to promote recycling and reuse policies and energy recovery technologies, nowadays the majority of MSW still is disposed in sanitary landfills. During the phases of operation and post-closure maintenance of any solid waste disposal site, two of the most relevant problems are the production of leachate and the generation of biogas. The leachate and biogas production formation processes occur simultaneously over time and are coupled together through the consumption and/or production of water. However, no mathematical models have been easily identified that allow to the evaluation of the joint production of leachate and biogas, during the operational and the post-closure phase of an urban waste landfill. This paper introduces BIOLEACH, a new mathematical model programmed on a monthly scale, that evaluates the joint production of leachate and biogas applying water balance techniques and considers the management of the landfill as a bioreactor. The application of such a model on real landfills allows to perform an environmentally sustainable management that minimizes the environmental impacts produced being also economically more profitable.

Prosodic development in middle childhood and adolescence in high-functioning autism.

PubMed

Lyons, Megan; Schoen Simmons, Elizabeth; Paul, Rhea

2014-04-01

The present study aims to investigate the perception and production of several domains of prosodic performance in a cross-sectional sample of preadolescents and adolescents with and without high-functioning autism (HFA). To look at the role of language abilities on prosodic performance, the HFA groups were subdivided based on "high" and "low" language performance on the Clinical Evaluation of Language Fundamentals-Fourth Edition (CELF-4) (Semel, Wiig, & Secord). Social and cognitive abilities were also examined to determine their relationship to prosodic performance. No significant differences were seen in prosody scores in the younger versus older subgroups in typically developing (TD) group with age-appropriate language. There was small but significant improvement in performance with age in the groups with HFA. Comparing performance at each age level across diagnostic groups showed that preteens with HFA and higher language levels perform similarly to their TD peers on all prosodic tasks, whereas those with lower language skills scored significantly worse than both their higher language and TD peers when looking at composite perception and production findings. Teens with HFA showed no deficits on perception tasks; however, those with low language levels had difficulty on several production tasks when compared to the TD group. Regression analyses suggested that, for the preteen group with HFA, language was the strongest predictor of prosodic perception, whereas nonverbal IQ was most highly predictive of prosodic production. For adolescents with HFA, social skills significantly contributed to the prediction of prosodic perception and, along with language abilities, predicted prosodic production. Implications of these findings will be discussed. © 2014 International Society for Autism Research, Wiley Periodicals, Inc.

Evaluation of scheduling techniques for payload activity planning

NASA Technical Reports Server (NTRS)

Bullington, Stanley F.

1991-01-01

Two tasks related to payload activity planning and scheduling were performed. The first task involved making a comparison of space mission activity scheduling problems with production scheduling problems. The second task consisted of a statistical analysis of the output of runs of the Experiment Scheduling Program (ESP). Details of the work which was performed on these two tasks are presented.

Performance and mechanism of standard nano-TiO2(P-25) in photocatalytic disinfection of foodborne microorganisms - salmonella typhimurium and listeria monocytogenes

USDA-ARS?s Scientific Manuscript database

In this paper, effects of disinfection by nano-TiO2 were studied on the two typical foodborne microorganisms, Gram-negative bacterium Salmonella typhimurium and Gram-positive bacterium-Listeria monocytogenes, in meat products. The performance of nano-TiO2 against the foodborne pathogens was evaluate...

[Performance evaluation of a fluorescamine-HPLC method for determination of histamine in fish and fish products].

PubMed

Kikuchi, Hiroyuki; Tsutsumi, Tomoaki; Matsuda, Rieko

2012-01-01

A method for the quantification of histamine in fish and fish products using tandem solid-phase extraction and fluorescence derivatization with fluorescamine was previously developed. In this study, we improved this analytical method to develop an official test method for quantification of histamine in fish and fish products, and performed a single laboratory study to validate it. Recovery tests of histamine from fillet (Thunnus obesus), and two fish products (fish sauce and salted and dried whole big-eye sardine) that were spiked at the level of 25 and 50 µg/g for T. obesus, and 50 and 100 µg/g for the two fish products, were carried out. The recoveries of histamine from the three samples tested were 88.8-99.6% with good repeatability (1.3-2.1%) and reproducibility (2.1-4.7%). Therefore, this method is acceptable for the quantification of histamine in fish and fish products. Moreover, surveillance of histamine content in food on the market was conducted using this method, and high levels of histamine were detected in some fish products.

Evaluation of Asphalt Mixture Low-Temperature Performance in Bending Beam Creep Test.

PubMed

Pszczola, Marek; Jaczewski, Mariusz; Rys, Dawid; Jaskula, Piotr; Szydlowski, Cezary

2018-01-10

Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test performed at temperatures from -20 °C to +10 °C in order to evaluate the low-temperature performance of asphalt mixtures. Both validation of the method and its utilization for the assessment of eight types of wearing courses commonly used in Poland were described. The performed test indicated that the source of bitumen and its production process (and not necessarily only bitumen penetration) had a significant impact on the low-temperature performance of the asphalt mixtures, comparable to the impact of binder modification (neat, polymer-modified, highly modified) and the aggregate skeleton used in the mixture (Stone Mastic Asphalt (SMA) vs. Asphalt Concrete (AC)). Obtained Bending Beam Creep test results were compared with the BBR bitumen test. Regression analysis confirmed that performing solely bitumen tests is insufficient for comprehensive low-temperature performance analysis.

Evaluation of Asphalt Mixture Low-Temperature Performance in Bending Beam Creep Test

PubMed Central

Rys, Dawid; Jaskula, Piotr; Szydlowski, Cezary

2018-01-01

Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test performed at temperatures from −20 °C to +10 °C in order to evaluate the low-temperature performance of asphalt mixtures. Both validation of the method and its utilization for the assessment of eight types of wearing courses commonly used in Poland were described. The performed test indicated that the source of bitumen and its production process (and not necessarily only bitumen penetration) had a significant impact on the low-temperature performance of the asphalt mixtures, comparable to the impact of binder modification (neat, polymer-modified, highly modified) and the aggregate skeleton used in the mixture (Stone Mastic Asphalt (SMA) vs. Asphalt Concrete (AC)). Obtained Bending Beam Creep test results were compared with the BBR bitumen test. Regression analysis confirmed that performing solely bitumen tests is insufficient for comprehensive low-temperature performance analysis. PMID:29320443

An importance-performance analysis of hospital information system attributes: A nurses' perspective.

PubMed

Cohen, Jason F; Coleman, Emma; Kangethe, Matheri J

2016-02-01

Health workers have numerous concerns about hospital IS (HIS) usage. Addressing these concerns requires understanding the system attributes most important to their satisfaction and productivity. Following a recent HIS implementation, our objective was to identify priorities for managerial intervention based on user evaluations of the performance of the HIS attributes as well as the relative importance of these attributes to user satisfaction and productivity outcomes. We collected data along a set of attributes representing system quality, data quality, information quality, and service quality from 154 nurse users. Their quantitative responses were analysed using the partial least squares approach followed by an importance-performance analysis. Qualitative responses were analysed using thematic analysis to triangulate and supplement the quantitative findings. Two system quality attributes (responsiveness and ease of learning), one information quality attribute (detail), one service quality attribute (sufficient support), and three data quality attributes (records complete, accurate and never missing) were identified as high priorities for intervention. Our application of importance-performance analysis is unique in HIS evaluation and we have illustrated its utility for identifying those system attributes for which underperformance is not acceptable to users and therefore should be high priorities for intervention. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

HPC in a HEP lab: lessons learned from setting up cost-effective HPC clusters

NASA Astrophysics Data System (ADS)

Husejko, Michal; Agtzidis, Ioannis; Baehler, Pierre; Dul, Tadeusz; Evans, John; Himyr, Nils; Meinhard, Helge

2015-12-01

In this paper we present our findings gathered during the evaluation and testing of Windows Server High-Performance Computing (Windows HPC) in view of potentially using it as a production HPC system for engineering applications. The Windows HPC package, an extension of Microsofts Windows Server product, provides all essential interfaces, utilities and management functionality for creating, operating and monitoring a Windows-based HPC cluster infrastructure. The evaluation and test phase was focused on verifying the functionalities of Windows HPC, its performance, support of commercial tools and the integration with the users work environment. We describe constraints imposed by the way the CERN Data Centre is operated, licensing for engineering tools and scalability and behaviour of the HPC engineering applications used at CERN. We will present an initial set of requirements, which were created based on the above constraints and requests from the CERN engineering user community. We will explain how we have configured Windows HPC clusters to provide job scheduling functionalities required to support the CERN engineering user community, quality of service, user- and project-based priorities, and fair access to limited resources. Finally, we will present several performance tests we carried out to verify Windows HPC performance and scalability.