Using hazard maps to identify and eliminate workplace hazards: a union-led health and safety training program.

PubMed

Anderson, Joe; Collins, Michele; Devlin, John; Renner, Paul

2012-01-01

The Institute for Sustainable Work and Environment and the Utility Workers Union of America worked with a professional evaluator to design, implement, and evaluate the results of a union-led system of safety-based hazard identification program that trained workers to use hazard maps to identify workplace hazards and target them for elimination. The evaluation documented program implementation and impact using data collected from both qualitative interviews and an on-line survey from worker trainers, plant managers, and health and safety staff. Managers and workers reported that not only were many dangerous hazards eliminated as a result of hazard mapping, some of which were long-standing, difficult-to-resolve issues, but the evaluation also documented improved communication between union members and management that both workers and managers agreed resulted in better, more sustainable hazard elimination.

Safety performance functions for intersections : final report, December 2009.

DOT National Transportation Integrated Search

2009-12-01

Road safety management activities include screening the network for sites with a potential for safety improvement (Network : Screening), diagnosing safety problems at specific sites, and evaluating the safety effectiveness of implemented : countermea...

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

PubMed Central

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

Comparison of AIHA ISO 9001-based occupational health and safety management system guidance document with a manufacturer's occupational health and safety assessment instrument.

PubMed

Dyjack, D T; Levine, S P; Holtshouser, J L; Schork, M A

1998-06-01

Numerous manufacturing and service organizations have integrated or are considering integration of their respective occupational health and safety management and audit systems into the International Organization for Standardization-based (ISO) audit-driven Quality Management Systems (ISO 9000) or Environmental Management Systems (ISO 14000) models. Companies considering one of these options will likely need to identify and evaluate several key factors before embarking on such efforts. The purpose of this article is to identify and address the key factors through a case study approach. Qualitative and quantitative comparisons of the key features of the American Industrial Hygiene Association ISO-9001 harmonized Occupational Health and Safety Management System with The Goodyear Tire & Rubber Co. management and audit system were conducted. The comparisons showed that the two management systems and their respective audit protocols, although structured differently, were not substantially statistically dissimilar in content. The authors recommend that future studies continue to evaluate the advantages and disadvantages of various audit protocols. Ideally, these studies would identify those audit outcome measures that can be reliably correlated with health and safety performance.

How do chiropractors manage clinical risk? A questionnaire study.

PubMed

Wangler, Martin; Peterson, Cynthia; Zaugg, Beatrice; Thiel, Haymo; Finch, Rob

2013-06-08

The literature on chiropractic safety tends to focus on adverse events and little is known about how chiropractors ensure safety and manage risk in the course of their daily practice. The purpose of this study was to investigate how chiropractors manage potentially risky clinical scenarios. We also sought to establish how chiropractors perceive the safety climate in their workplace and thus whether there is an observable culture of safety within the profession. An online questionnaire was designed to determine which of nine management options would be chosen by the respondent in response to four defined clinical case scenarios. Safety climate within the respondent's practice setting was measured by seeking the level of agreement with 23 statements relating to six different safety dimensions. 260 licensed chiropractors in Switzerland and 1258 UK members of The Royal College of Chiropractors were invited to complete the questionnaire. Questionnaire responses were analysed quantitatively in respect of the four clinical scenarios and the nine management options to determine the likelihood of each option being undertaken, with results recorded in terms of % likelihood. Gender differences in response to the management options for each scenario were evaluated using the Mann-Whitney U (MWU) test. Positive agreement with elements comprising each of the six safety dimensions contributed to a composite '% positive agreement' score calculated for each dimension. Questionnaire responses were received from 76% (200/260) of Swiss participants and 31% (393/1258) of UK members of The Royal College of Chiropractors. There was a general trend for Swiss and UK chiropractors to manage clinical scenarios where treatment appears not to be successful, not indicated, possibly harmful or where a patient is apparently getting worse, by re-evaluating their care. Stopping treatment and/or incident reporting to a safety incident reporting and learning system were generally found to be unlikely courses of action. Gender differences were observed with female chiropractors appearing to be more risk averse. Swiss and UK chiropractors tend to manage potentially risky clinical scenarios by re-evaluating the case. The unlikeliness of safety incident reporting is probably due to a range of recognised barriers, although Swiss and UK chiropractors are positive about local communication and openness which are important tenets for safety incident reporting. The observed positivity towards key aspects of clinic safety indicates a developing safety culture within the Swiss and UK chiropractic professions.

77 FR 72435 - Pipeline Safety: Using Meaningful Metrics in Conducting Integrity Management Program Evaluations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-05

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Evaluations AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice... improve performance. For gas transmission pipelines, Sec. Sec. 192.911(i) and 192.945 define the...

Road safety issues for bus transport management.

PubMed

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding of their actual effectiveness and related risk factor avoidance must be developed to permit their useful implementation in bus fleets. Copyright © 2013 Elsevier Ltd. All rights reserved.

The transferability of safety-driven access management models for application to other sites.

DOT National Transportation Integrated Search

2001-01-01

Several research studies have produced mathematical models that predict the safety impacts of selected access management techniques. Since new models require substantial resources to construct, this study evaluated five existing models with regard to...

[Definition of "Safety and Hygiene Packages" as a management model for the Hospital Hygiene Service (HHS)].

PubMed

Raponi, Matteo; Damiani, Gianfranco; Vincenti, Sara; Wachocka, Malgorzata; Boninti, Federica; Bruno, Stefania; Quaranta, Gianluigi; Moscato, Umberto; Boccia, Stefania; Ficarra, Maria Giovanna; Specchia, Maria Lucia; Posteraro, Brunella; Berloco, Filippo; Celani, Fabrizio; Ricciardi, Walter; Laurenti, Patrizia

2014-01-01

The purpose of this research is to identify and formalize the Hospital Hygiene Service activities and products, evaluating them in a cost accounting management view. The ultimate aim, is to evaluate the financial adverse events prevention impact, in an Hospital Hygiene Service management. A three step methodology based on affinity grouping activities, was employed. This methodology led us to identify 4 action areas, with 23 related productive processes, and 86 available safety packages. Owing to this new methodology, we was able to implement a systematic evaluation of the furnished services.

Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403

Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

PubMed

Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

2008-05-01

Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

Longitudinal safety evaluation of connected vehicles' platooning on expressways.

PubMed

Rahman, Md Sharikur; Abdel-Aty, Mohamed

2018-08-01

Connected vehicles (CV) technology has recently drawn an increasing attention from governments, vehicle manufacturers, and researchers. One of the biggest issues facing CVs popularization associates it with the market penetration rate (MPR). The full market penetration of CVs might not be accomplished recently. Therefore, traffic flow will likely be composed of a mixture of conventional vehicles and CVs. In this context, the study of CV MPR is worthwhile in the CV transition period. The overarching goal of this study was to evaluate longitudinal safety of CV platoons by comparing the implementation of managed-lane CV platoons and all lanes CV platoons (with same MPR) over non-CV scenario. This study applied the CV concept on a congested expressway (SR408) in Florida to improve traffic safety. The Intelligent Driver Model (IDM) along with the platooning concept were used to regulate the driving behavior of CV platoons with an assumption that the CVs would follow this behavior in real-world. A high-level control algorithm of CVs in a managed-lane was proposed in order to form platoons with three joining strategies: rear join, front join, and cut-in joint. Five surrogate safety measures, standard deviation of speed, time exposed time-to-collision (TET), time integrated time-to-collision (TIT), time exposed rear-end crash risk index (TERCRI), and sideswipe crash risk (SSCR) were utilized as indicators for safety evaluation. The results showed that both CV approaches (i.e., managed-lane CV platoons, and all lanes CV platoons) significantly improved the longitudinal safety in the studied expressway compared to the non-CV scenario. In terms of surrogate safety measures, the managed-lane CV platoons significantly outperformed all lanes CV platoons with the same MPR. Different time-to-collision (TTC) thresholds were also tested and showed similar results on traffic safety. Results of this study provide useful insight for the management of CV MPR as managed-lane CV platoons. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation and review of the safety management system implementation in the Royal Thai Air Force

NASA Astrophysics Data System (ADS)

Chaiwan, Sakkarin

This study was designed to determine situation and effectiveness of the safety management system currently implemented in the Royal Thai Air Force. Reviewing the ICAO's SMS and the RTAF's SMS was conducted to identify similarities and differences between the two safety management systems. Later, the researcher acquired safety statistics from the RTAF Safety Center to investigate effectiveness of its safety system. The researcher also collected data to identify other factors affecting effectiveness of the safety system during conducting in-depth interviews. Findings and Conclusions: The study shows that the Royal Thai Air Force has never applied the International Civil Aviation Organization's Safety management System to its safety system. However, the RTAF's SMS and the ICAO's SMS have been developed based on the same concepts. These concepts are from Richard H. Woods's book, Aviation safety programs: A management handbook. However, the effectiveness of the Royal Thai Air Force's safety system is in good stance. An accident rate has been decreasing regularly but there are no known factors to describe the increasing rate, according to the participants' opinion. The participants have informed that there are many issues to be resolved to improve the RTAF's safety system. Those issues are cooperation among safety center's staffs, attitude toward safety of the RTAF senior commanders, and safety standards.

Using historical crash data as part of traffic work zone safety planning and project management strategies.

DOT National Transportation Integrated Search

2014-07-01

This funding enabled the project entitled, USING HISTORICAL CRASH DATA AS PART OF TRAFFIC WORK ZONE SAFETY : PLANNING AND PROJECT MANAGEMENT STRATEGIES to address the following: : Evaluate current organizational strategies with respect to w...

[Establish research model of post-marketing clinical safety evaluation for Chinese patent medicine].

PubMed

Zheng, Wen-ke; Liu, Zhi; Lei, Xiang; Tian, Ran; Zheng, Rui; Li, Nan; Ren, Jing-tian; Du, Xiao-xi; Shang, Hong-cai

2015-09-01

The safety of Chinese patent medicine has become a focus of social. It is necessary to carry out work on post-marketing clinical safety evaluation for Chinese patent medicine. However, there have no criterions to guide the related research, it is urgent to set up a model and method to guide the practice for related research. According to a series of clinical research, we put forward some views, which contained clear and definite the objective and content of clinical safety evaluation, the work flow should be determined, make a list of items for safety evaluation project, and put forward the three level classification of risk control. We set up a model of post-marketing clinical safety evaluation for Chinese patent medicine. Based this model, the list of items can be used for ranking medicine risks, and then take steps for different risks, aims to lower the app:ds:risksrisk level. At last, the medicine can be managed by five steps in sequence. The five steps are, collect risk signal, risk recognition, risk assessment, risk management, and aftereffect assessment. We hope to provide new ideas for the future research.

Canadian Pacific Railway Investigation of Safety-Related Occurrences Protocol considered helpful by both labor and management.

DOT National Transportation Integrated Search

2006-09-01

The Federal Railroad Administration (FRA) Human Factors Research and Development (R&D) Program sponsored an Alternative Safety Measures Program designed to explore alternative methods for evaluating whether safety programs improve safety outcomes and...

Automated Pedestrian Detection, Count and Analysis System

DOT National Transportation Integrated Search

2015-04-15

Pedestrian and bicycle count data is necessary for transportation planning, implementing safety countermeasures, and traffic management. This data is critical when evaluating the pedestrian level of service of safety (LOSS) and pedestrian safety perf...

Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

48 CFR 1816.405-274 - Award fee evaluation factors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... factor, if used, must include consideration of risk management (including mission success, safety... above the contracting officer, with the concurrence of the project manager. The rationale for any waiver shall be documented in the contract file. When safety, export control, or security are considered under...

Protocol for a mixed-methods study on leader-based interventions in construction contractors' safety commitments.

PubMed

Pedersen, Betina Holbaek; Dyreborg, Johnny; Kines, Pete; Mikkelsen, Kim Lyngby; Hannerz, Harald; Andersen, Dorte Raaby; Spangenberg, Søren

2010-06-01

Owing to high injury rates, safety interventions are needed in the construction industry. Evidence-based interventions tailored to this industry are, however, scarce. Leader-based safety interventions have proven more effective than worker-based interventions in other industries. To test a leader-based safety intervention for construction sites. The intervention consists of encouraging safety coordinators to provide feedback on work safety to the client and line management. The intention is to increase communication and interactions regarding safety within the line management and between the client and the senior management. It is hypothesised that this, in turn, will lead to increased communication and interaction about safety between management and coworkers as well as an increased on-site safety level. A group-randomised double-blinded case study of six Danish construction sites (three intervention sites and three control sites). The recruitment of the construction sites is performed continuously from January 2010 to June 2010. The investigation of each site lasts 20 continuous weeks. Confirmatory statistical analysis is used to test if the safety level increased, and if the probability of safety communications between management and coworkers increases as a consequence of the intervention. The data collection will be blinded. Qualitative methods are used to evaluate if communication and interactions about safety at all managerial levels, including the client, increase. (1) The proportion of safety-related communications out of all studied communications between management and coworkers. (2) The safety level index of the construction sites.

Analysis of safety impacts of access management alternatives using the surrogate safety assessment model : final report.

DOT National Transportation Integrated Search

2017-06-01

The purpose of this study was to evaluate if the Surrogate Safety Assessment Model (SSAM) could be used to assess the safety of a highway segment or an intersection in terms of the number and type of conflicts and to compare the safety effects of mul...

Initial development of a practical safety audit tool to assess fleet safety management practices.

PubMed

Mitchell, Rebecca; Friswell, Rena; Mooren, Lori

2012-07-01

Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Endoscopic non-technical skills team training: the next step in quality assurance of endoscopy training.

PubMed

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-12-14

To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day's training utilising real clinical examples. Pre and post-course evaluation comprised participants' patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams' knowledge and safety attitudes.

Endoscopic non-technical skills team training: The next step in quality assurance of endoscopy training

PubMed Central

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-01-01

AIM: To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. METHODS: A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day’s training utilising real clinical examples. Pre and post-course evaluation comprised participants’ patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. RESULTS: Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. CONCLUSION: A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams’ knowledge and safety attitudes. PMID:25516665

Consumer and farmer safety evaluation of application of botanical pesticides in black pepper crop protection.

PubMed

Hernández-Moreno, David; Soffers, Ans E M F; Wiratno; Falke, Hein E; Rietjens, Ivonne M C M; Murk, Albertinka J

2013-06-01

This study presents a consumer and farmer safety evaluation on the use of four botanical pesticides in pepper berry crop protection. The pesticides evaluated include preparations from clove, tuba root, sweet flag and pyrethrum. Their safety evaluation was based on their active ingredients being eugenol, rotenone, β-asarone and pyrethrins, respectively. Botanical pesticides from Acorus calamus are of possible concern because of the genotoxic and carcinogenic ingredient β-asarone although estimated margins of exposure (MOE) for consumers indicate a low priority for risk management. For the other three botanical pesticides the margin of safety (MOS) between established acute reference doses and/or acceptable daily intake values and intake estimates for the consumer, resulting from their use as a botanical pesticide are not of safety concern, with the exception for levels of rotenone upon use of tuba root extracts on stored berries. Used levels of clove and pyrethrum as botanical pesticides in pepper berry crop production is not of safety concern for consumers or farmers, whereas for use of tuba root and sweet flag some risk factors were defined requiring further evaluation and/or risk management. It seems prudent to look for alternatives for use of sweet flag extracts containing β-asarone. Copyright © 2013 Elsevier Ltd. All rights reserved.

A job safety program for construction workers designed to reduce the potential for occupational injury using tool box training sessions and computer-assisted biofeedback stress management techniques.

PubMed

Johnson, Kenneth A; Ruppe, Joan

2002-01-01

This project was conducted with a multicultural construction company in Hawaii, USA. The job duties performed included drywall and carpentry work. The following objectives were selected for this project: (a) fire prevention training and inspection of first aid equipment; (b) blood-borne pathogen training and risk evaluation; (c) ergonomic and risk evaluation intervention program; (d) electrical safety training and inspection program; (e) slips, trips, and falls safety training; (f) stress assessment and Personal Profile System; (g) safety and health program survey; (h) improving employee relations and morale by emphasizing spirituality; and (i) computer-assisted biofeedback stress management training. Results of the project indicated that observed safety hazards, reported injuries, and levels of perceived stress. were reduced for the majority of the population.

Health, safety, and environmental management system operation in contracting companies: A case study.

PubMed

Nassiri, Parvin; Yarahmadi, Rasoul; Gholami, Pari Shafaei; Hamidi, Abdolamir; Mirkazemi, Roksana

2016-05-03

Systematic and cooperative interactions among parent industry and contractors are necessary for a successful health, safety, and environmental management system (HSE-MS). This study was conducted to evaluate the HSE-MS performance in contracting companies in one of the petrochemical industries in Iran during 2013. Managers of parent and contracting companies participated in this study. The data collection forms included 7 elements of an integrated HSE-MS (leadership and commitment; policy and strategic objectives; organization, resources, and documentation; evaluation and risk management; planning; implementation and monitoring; auditing and reviewing). The results showed that mean percentage of the total scores in seven elements of HSE-MS was 85.7% and 87.0% based on self-report and report of parent company, respectively. In conclusion, this study showed that HSE-MS was desirably functioning; however, improvement to ensure health and safety of workers is still required.

Safety at the Summit.

ERIC Educational Resources Information Center

Huddleston, Elizabeth

2001-01-01

Explores how risk-management strategies can make the difference in climbing wall safety. Wall design, adhering to wall construction standards, limiting wall access, and climber evaluation are discussed. (GR)

Patient safety culture in hospitals within the nursing perspective.

PubMed

Toso, Greice Letícia; Golle, Lidiane; Magnago, Tânia Solange Bosi de Souza; Herr, Gerli Elenise Gehrke; Loro, Marli Maria; Aozane, Fabiele; Kolankiewicz, Adriane Cristina Bernat

2016-12-15

Evaluate the atmosphere regarding patient safety from the perspective of active nurses in hospitals in a country town of Rio Grande do Sul State. Cross-sectional study with 637 nursing professionals from two hospitals. Data collection through Safety Attitudes Questionnaire, in the second half of 2014. Cutoff for positive assessment was ≥75 points. The scores for domains in the overall assessment were: 76 (team work atmosphere), 73 (safety atmosphere), 88 (job satisfaction), 59 (perceived stress), 66 (perception of unit management), 65 (perception of hospital management) and 80 (work conditions). When comparing averages between institutions, the private institution showed better working conditions. Results can be used to plan and organize actions, given the low scores in relation to the safety atmosphere, management and stress perception.

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

PubMed

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001) scores compared with control clubs at the post-season and 12-month follow-ups. There was also a significant linear interaction of time and group for all three scores: policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001). SafeClub effectively assisted community soccer clubs to improve their sports safety activities, particularly the foundations and processes for good risk-management practice, in a sustainable way.

Occupational Safety and Health Professionals' Training in Italy: Qualitative Evaluation Using T-LAB

ERIC Educational Resources Information Center

Papaleo, Bruno; Cangiano, Giovanna; Calicchia, Sara

2013-01-01

Purpose: The purpose of this paper is to describe the evaluation of a training course on chemicals for occupational safety and health (OSH) professionals. The study aims were to assess the effectiveness of the course; to find out what type of training met these workers' needs best, as their role is vital in the management of safety at work; and to…

Meeting the customer's needs for mobility and safety during construction and maintenance operations : model work zone traffic management program and self evaluation guide

DOT National Transportation Integrated Search

1998-09-01

This model program was developed by combining traffic management concepts reported in research studies and papers with the effective techniques currently being used by States to minimize motorist delays and enhance work zone safety. This model is pre...

NASA System Safety Handbook. Volume 2: System Safety Concepts, Guidelines, and Implementation Examples

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Feather, Martin; Rutledge, Peter; Sen, Dev; Youngblood, Robert

2015-01-01

This is the second of two volumes that collectively comprise the NASA System Safety Handbook. Volume 1 (NASASP-210-580) was prepared for the purpose of presenting the overall framework for System Safety and for providing the general concepts needed to implement the framework. Volume 2 provides guidance for implementing these concepts as an integral part of systems engineering and risk management. This guidance addresses the following functional areas: 1.The development of objectives that collectively define adequate safety for a system, and the safety requirements derived from these objectives that are levied on the system. 2.The conduct of system safety activities, performed to meet the safety requirements, with specific emphasis on the conduct of integrated safety analysis (ISA) as a fundamental means by which systems engineering and risk management decisions are risk-informed. 3.The development of a risk-informed safety case (RISC) at major milestone reviews to argue that the systems safety objectives are satisfied (and therefore that the system is adequately safe). 4.The evaluation of the RISC (including supporting evidence) using a defined set of evaluation criteria, to assess the veracity of the claims made therein in order to support risk acceptance decisions.

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

PubMed

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

75 FR 62895 - Notice of Availability of Safety Evaluation Report; AREVA Enrichment Services LLC, Eagle Rock...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... Evaluation Report; AREVA Enrichment Services LLC, Eagle Rock Enrichment Facility, Bonneville County, ID... report. FOR FURTHER INFORMATION CONTACT: Breeda Reilly, Senior Project Manager, Advanced Fuel Cycle, Enrichment, and Uranium Conversion, Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material...

Managing health and safety risks: Implications for tailoring health and safety management system practices.

PubMed

Willmer, D R; Haas, E J

2016-01-01

As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

Environment, Safety, and Health Self-Assessment Report, Fiscal Year 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chernowski, John

2009-02-27

Lawrence Berkeley National Laboratory's Environment, Safety, and Health (ES&H) Self-Assessment Program ensures that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The Self-Assessment Program, managed by the Office of Contract Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The functions of the program are to ensure that work is conducted safely, and with minimal negative impact to workers, the public, and the environment. The Self-Assessment Program is also the mechanism used to institute continuous improvements to the Laboratory's ES&H programs. The program is described in LBNL/PUB 5344, Environment, Safety, andmore » Health Self-Assessment Program and is composed of four distinct assessments: the Division Self-Assessment, the Management of Environment, Safety, and Health (MESH) review, ES&H Technical Assurance, and the Appendix B Self-Assessment. The Division Self-Assessment uses the five core functions and seven guiding principles of ISM as the basis of evaluation. Metrics are created to measure performance in fulfilling ISM core functions and guiding principles, as well as promoting compliance with applicable regulations. The five core functions of ISM are as follows: (1) Define the Scope of Work; (2) Identify and Analyze Hazards; (3) Control the Hazards; (4) Perform the Work; and (5) Feedback and Improvement. The seven guiding principles of ISM are as follows: (1) Line Management Responsibility for ES&H; (2) Clear Roles and Responsibilities; (3) Competence Commensurate with Responsibilities; (4) Balanced Priorities; (5) Identification of ES&H Standards and Requirements; (6) Hazard Controls Tailored to the Work Performed; and (7) Operations Authorization. Performance indicators are developed by consensus with OCA, representatives from each division, and Environment, Health, and Safety (EH&S) Division program managers. Line management of each division performs the Division Self-Assessment annually. The primary focus of the review is workplace safety. The MESH review is an evaluation of division management of ES&H in its research and operations, focusing on implementation and effectiveness of the division's ISM plan. It is a peer review performed by members of the LBNL Safety Review Committee (SRC), with staff support from OCA. Each division receives a MESH review every two to four years, depending on the results of the previous review. The ES&H Technical Assurance Program (TAP) provides the framework for systematic reviews of ES&H programs and processes. The intent of ES&H Technical Assurance assessments is to provide assurance that ES&H programs and processes comply with their guiding regulations, are effective, and are properly implemented by LBNL divisions. The Appendix B Performance Evaluation and Measurement Plan (PEMP) requires that LBNL sustain and enhance the effectiveness of integrated safety, health, and environmental protection through a strong and well-deployed system. Information required for Appendix B is provided by EH&S Division functional managers. The annual Appendix B report is submitted at the close of the fiscal year. This assessment is the Department of Energy's (DOE) primary mechanism for evaluating LBNL's contract performance in ISM.« less

Does classroom-based Crew Resource Management training improve patient safety culture? A systematic review

PubMed Central

de Bruijne, Martine C; Zwijnenberg, Nicolien C; Jansma, Elise P; van Dyck, Cathy; Wagner, Cordula

2014-01-01

Aim: To evaluate the evidence of the effectiveness of classroom-based Crew Resource Management training on safety culture by a systematic review of literature. Methods: Studies were identified in PubMed, Cochrane Library, PsycINFO, and Educational Resources Information Center up to 19 December 2012. The Methods Guide for Comparative Effectiveness Reviews was used to assess the risk of bias in the individual studies. Results: In total, 22 manuscripts were included for review. Training settings, study designs, and evaluation methods varied widely. Most studies reporting only a selection of culture dimensions found mainly positive results, whereas studies reporting all safety culture dimensions of the particular survey found mixed results. On average, studies were at moderate risk of bias. Conclusion: Evidence of the effectiveness of Crew Resource Management training in health care on safety culture is scarce and the validity of most studies is limited. The results underline the necessity of more valid study designs, preferably using triangulation methods. PMID:26770720

On Building an Ontological Knowledge Base for Managing Patient Safety Events.

PubMed

Liang, Chen; Gong, Yang

2015-01-01

Over the past decade, improving healthcare quality and safety through patient safety event reporting systems has drawn much attention. Unfortunately, such systems are suffering from low data quality, inefficient data entry and ineffective information retrieval. For improving the systems, we develop a semantic web ontology based on the WHO International Classification for Patient Safety (ICPS) and AHRQ Common Formats for patient safety event reporting. The ontology holds potential in enhancing knowledge management and information retrieval, as well as providing flexible data entry and case analysis for both reporters and reviewers of patient safety events. In this paper, we detailed our efforts in data acquisition, transformation, implementation and initial evaluation of the ontology.

78 FR 30313 - Standardizing and Evaluating Risk Evaluation and Mitigation Strategies; Notice of Public Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852... with elements to assure safe use (ETASU) before the Drug Safety and Risk Management Advisory Committee... incorporate the latest methodologies in the evolving science of risk management. In its February 2013 report...

Drug safety: withdrawn medications are only part of the picture.

PubMed

Rawson, Nigel S B

2016-02-13

In a research article published in BMC Medicine, Onakpoya and colleagues provide a historical review of withdrawals of medications for safety reasons. However, withdrawn medications are only one part of the picture about how regulatory agencies manage drug risks. Moreover, medications introduced before the increased pre-marketing regulations and post-marketing monitoring systems instituted after the thalidomide tragedy have little relevance when considering the present drug safety picture because the circumstances under which they were introduced were completely different. To more fully understand drug safety management and regulatory agency actions, withdrawals should be evaluated within the setting and timeframe in which the medications are approved, which requires information about approvals and safety warnings. Studies are needed that provide a more comprehensive current picture of the identification and evaluation of drug safety risks as well as how regulatory agencies deal with them. Please see related research article: http://bmcmedicine.biomedcentral.com/articles/10.1186/s12916-016-0553-2.

[Implementation of a safety and health planning system in a teaching hospital].

PubMed

Mariani, F; Bravi, C; Dolcetti, L; Moretto, A; Palermo, A; Ronchin, M; Tonelli, F; Carrer, P

2007-01-01

University Hospital "L. Sacco" had started in 2006 a two-year project in order to set up a "Health and Safety Management System (HSMS)" referring to the technical guideline OHSAS 18001:1999 and the UNI and INAIL "Guidelines for a health and safety management system at workplace". So far, the following operations had been implemented: Setting up of a specific Commission within the Risk Management Committee; Identification and appointment of Departmental Representatives of HSMS; Carrying out of a training course addressed to Workers Representatives for Safety and Departmental Representatives of HSMS; Development of an Integrated Informative System for Prevention and Safety; Auditors qualification; Inspection of the Occupational Health Unit and the Prevention and Safety Service: reporting of critical situations and monitoring solutions adopted. Short term objectives are: Self-evaluation through check-lists of each department; Sharing of the Improvement Plan among the departments of the hospital; Planning of Health and Safety training activities in the framework of the Hospital Training Plan; Safety audit.

Study of the Continuous Improvement Trend for Health, Safety and Environmental Indicators, after Establishment of Integrated Management System (IMS) in a Pharmaceutical Industry in Iran.

PubMed

Mariouryad, Pegah; Golbabaei, Farideh; Nasiri, Parvin; Mohammadfam, Iraj; Marioryad, Hossein

2015-10-01

Nowadays, organizations try to improve their services and consequently adopt management systems and standards which have become key parts in various industries. One of these management systems which have been noticed in the recent years is Integrated Management System that is the combination of quality, health, safety and environment management systems. This study was conducted with the aim of evaluating the improvement trend after establishment of integrated management system for health, safety and environment indicators, in a pharmaceutical industry in Iran. First, during several inspections in different parts of the industry, indicators that should have been noted were listed and then these indicators were organized in 3 domains of health, safety and environment in the form of a questionnaire that followed Likert method of scaling. Also, the weight of each index was resulted from averaging out of 30 managers and the viewpoints of the related experts in the field. Moreover, by checking the documents and evidence of different years (5 contemplation years of this study), the score of each indicator was determined by multiplying the weight and score of the indices and were finally analysed. Over 5 years, scores of health scope indicators, increased from 161.99 to 202.23. Score in the first year after applying the integrated management system establishment was 172.37 in safety part and in the final year increased to 197.57. The changes of environmental scope rates, from the beginning of the program up to the last year increased from 49.24 to 64.27. Integrated management systems help organizations to improve programs to achieve their objectives. Although in this study all trends of health, safety and environmental indicator changes were positive, but at the same time showed to be slow. So, one can suggest that the result of an annual evaluation should be applied in planning future activities for the years ahead.

Study of the Continuous Improvement Trend for Health, Safety and Environmental Indicators, after Establishment of Integrated Management System (IMS) in a Pharmaceutical Industry in Iran

PubMed Central

Mariouryad, Pegah; Golbabaei, Farideh; Nasiri, Parvin; Mohammadfam, Iraj

2015-01-01

Background Nowadays, organizations try to improve their services and consequently adopt management systems and standards which have become key parts in various industries. One of these management systems which have been noticed in the recent years is Integrated Management System that is the combination of quality, health, safety and environment management systems. Aim This study was conducted with the aim of evaluating the improvement trend after establishment of integrated management system for health, safety and environment indicators, in a pharmaceutical industry in Iran. Materials and Methods First, during several inspections in different parts of the industry, indicators that should have been noted were listed and then these indicators were organized in 3 domains of health, safety and environment in the form of a questionnaire that followed Likert method of scaling. Also, the weight of each index was resulted from averaging out of 30 managers and the viewpoints of the related experts in the field. Moreover, by checking the documents and evidence of different years (5 contemplation years of this study), the score of each indicator was determined by multiplying the weight and score of the indices and were finally analysed. Results Over 5 years, scores of health scope indicators, increased from 161.99 to 202.23. Score in the first year after applying the integrated management system establishment was 172.37 in safety part and in the final year increased to 197.57. The changes of environmental scope rates, from the beginning of the program up to the last year increased from 49.24 to 64.27. Conclusion Integrated management systems help organizations to improve programs to achieve their objectives. Although in this study all trends of health, safety and environmental indicator changes were positive, but at the same time showed to be slow. So, one can suggest that the result of an annual evaluation should be applied in planning future activities for the years ahead. PMID:26557547

Findings from the National Machine Guarding Program–A Small Business Intervention: Machine Safety

PubMed Central

Yamin, Samuel C.; Xi, Min; Brosseau, Lisa M.; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2016-01-01

Objectives The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 – 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of OSHA citations and may result in serious traumatic injury. Methods Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits and a twelve-month follow-up evaluation. Results The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10-percentage point increase in business-level machine scores (p< 0.0001) and a 33-percentage point increase in LOTO program scores (p <0.0001). Conclusions Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees. PMID:26716850

Findings From the National Machine Guarding Program–A Small Business Intervention

PubMed Central

Parker, David L.; Yamin, Samuel C.; Xi, Min; Brosseau, Lisa M.; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2016-01-01

Objectives: The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Methods: Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. Results: The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Conclusions: Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees. PMID:27466709

A Semantic Approach with Decision Support for Safety Service in Smart Home Management

PubMed Central

Huang, Xiaoci; Yi, Jianjun; Zhu, Xiaomin; Chen, Shaoli

2016-01-01

Research on smart homes (SHs) has increased significantly in recent years because of the convenience provided by having an assisted living environment. The functions of SHs as mentioned in previous studies, particularly safety services, are seldom discussed or mentioned. Thus, this study proposes a semantic approach with decision support for safety service in SH management. The focus of this contribution is to explore a context awareness and reasoning approach for risk recognition in SH that enables the proper decision support for flexible safety service provision. The framework of SH based on a wireless sensor network is described from the perspective of neighbourhood management. This approach is based on the integration of semantic knowledge in which a reasoner can make decisions about risk recognition and safety service. We present a management ontology for a SH and relevant monitoring contextual information, which considers its suitability in a pervasive computing environment and is service-oriented. We also propose a rule-based reasoning method to provide decision support through reasoning techniques and context-awareness. A system prototype is developed to evaluate the feasibility, time response and extendibility of the approach. The evaluation of our approach shows that it is more effective in daily risk event recognition. The decisions for service provision are shown to be accurate. PMID:27527170

A Semantic Approach with Decision Support for Safety Service in Smart Home Management.

PubMed

Huang, Xiaoci; Yi, Jianjun; Zhu, Xiaomin; Chen, Shaoli

2016-08-03

Research on smart homes (SHs) has increased significantly in recent years because of the convenience provided by having an assisted living environment. The functions of SHs as mentioned in previous studies, particularly safety services, are seldom discussed or mentioned. Thus, this study proposes a semantic approach with decision support for safety service in SH management. The focus of this contribution is to explore a context awareness and reasoning approach for risk recognition in SH that enables the proper decision support for flexible safety service provision. The framework of SH based on a wireless sensor network is described from the perspective of neighbourhood management. This approach is based on the integration of semantic knowledge in which a reasoner can make decisions about risk recognition and safety service. We present a management ontology for a SH and relevant monitoring contextual information, which considers its suitability in a pervasive computing environment and is service-oriented. We also propose a rule-based reasoning method to provide decision support through reasoning techniques and context-awareness. A system prototype is developed to evaluate the feasibility, time response and extendibility of the approach. The evaluation of our approach shows that it is more effective in daily risk event recognition. The decisions for service provision are shown to be accurate.

Does lean management improve patient safety culture? An extensive evaluation of safety culture in a radiotherapy institute.

PubMed

Simons, Pascale A M; Houben, Ruud; Vlayen, Annemie; Hellings, Johan; Pijls-Johannesma, Madelon; Marneffe, Wim; Vandijck, Dominique

2015-02-01

The importance of a safety culture to maximize safety is no longer questioned. However, achieving sustainable culture improvements are less evident. Evidence is growing for a multifaceted approach, where multiple safety interventions are combined. Lean management is such an integral approach to improve safety, quality and efficiency and therefore, could be expected to improve the safety culture. This paper presents the effects of lean management activities on the patient safety culture in a radiotherapy institute. Patient safety culture was evaluated over a three year period using triangulation of methodologies. Two surveys were distributed three times, workshops were performed twice, data from an incident reporting system (IRS) was monitored and results were explored using structured interviews with professionals. Averages, chi-square, logistical and multi-level regression were used for analysis. The workshops showed no changes in safety culture, whereas the surveys showed improvements on six out of twelve dimensions of safety climate. The intention to report incidents not reaching patient-level decreased in accordance with the decreasing number of reports in the IRS. However, the intention to take action in order to prevent future incidents improved (factorial survey presented β: 1.19 with p: 0.01). Due to increased problem solving and improvements in equipment, the number of incidents decreased. Although the intention to report incidents not reaching patient-level decreased, employees experienced sustained safety awareness and an increased intention to structurally improve. The patient safety culture improved due to the lean activities combined with an organizational restructure, and actual patient safety outcomes might have improved as well. Copyright © 2014 Elsevier Ltd. All rights reserved.

NASA Safety Manual. Volume 3: System Safety

NASA Technical Reports Server (NTRS)

1970-01-01

This Volume 3 of the NASA Safety Manual sets forth the basic elements and techniques for managing a system safety program and the technical methods recommended for use in developing a risk evaluation program that is oriented to the identification of hazards in aerospace hardware systems and the development of residual risk management information for the program manager that is based on the hazards identified. The methods and techniques described in this volume are in consonance with the requirements set forth in NHB 1700.1 (VI), Chapter 3. This volume and future volumes of the NASA Safety Manual shall not be rewritten, reprinted, or reproduced in any manner. Installation implementing procedures, if necessary, shall be inserted as page supplements in accordance with the provisions of Appendix A. No portion of this volume or future volumes of the NASA Safety Manual shall be invoked in contracts.

Assessing the Food Safety Attitudes and Awareness of Managers of School Feeding Programmes in Mpumalanga, South Africa.

PubMed

Sibanyoni, J J; Tabit, F T

2017-08-01

The managers of school feeding programmes are responsible for ensuring the safety of the food which is provided to schoolchildren, but very few studies have been conducted on the food safety knowledge and awareness of these managers. The objective of this study is to evaluate the food safety attitudes and awareness of managers of the National School Nutrition Programme (NSNP) in schools in Mpumalanga, a province of South Africa. A cross-sectional survey study was conducted in which questionnaires were used to collect data from 300 NSNP food service managers. The majority of schools offering NSNP meals were located in informal settlements and most were found to lack basic resources such as electricity (power supplies to the food preparation facility) and potable tap water in their kitchens. No school was found to have implemented the hazard analysis and critical control points (HACCP) programme, and only a few staff had received food safety training. Food safety implementation is worst in informal schools in rural areas due to limited resources and infrastructure. The NSNP food service managers in some schools-especially those located in rural settlements-were found to have little knowledge and awareness of HACCP. These results indicate an urgent need to provide NSNP managers with food safety training and resources (potable water supplies, electricity, dedicated food preparation facilities), particularly in schools in rural settlements.

Quality management and perceptions of teamwork and safety climate in European hospitals.

PubMed

Kristensen, Solvejg; Hammer, Antje; Bartels, Paul; Suñol, Rosa; Groene, Oliver; Thompson, Caroline A; Arah, Onyebuchi A; Kutaj-Wasikowska, Halina; Michel, Philippe; Wagner, Cordula

2015-12-01

This study aimed to investigate the associations of quality management systems with teamwork and safety climate, and to describe and compare differences in perceptions of teamwork climate and safety climate among clinical leaders and frontline clinicians. We used a multi-method, cross-sectional approach to collect survey data of quality management systems and perceived teamwork and safety climate. Our data analyses included descriptive and multilevel regression methods. Data on implementation of quality management system from seven European countries were evaluated including patient safety culture surveys from 3622 clinical leaders and 4903 frontline clinicians. Perceived teamwork and safety climate. Teamwork climate was reported as positive by 67% of clinical leaders and 43% of frontline clinicians. Safety climate was perceived as positive by 54% of clinical leaders and 32% of frontline clinicians. We found positive associations between implementation of quality management systems and teamwork and safety climate. Our findings, which should be placed in a broader clinical quality improvement context, point to the importance of quality management systems as a supportive structural feature for promoting teamwork and safety climate. To gain a deeper understanding of this association, further qualitative and quantitative studies using longitudinally collected data are recommended. The study also confirms that more clinical leaders than frontline clinicians have a positive perception of teamwork and safety climate. Such differences should be accounted for in daily clinical practice and when tailoring initiatives to improve teamwork and safety climate. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Concept for a Satellite-Based Advanced Air Traffic Management System : Volume 5. System Performance.

DOT National Transportation Integrated Search

1974-02-01

The volume presents the results of the performance evaluation of the Satellite-Based Advanced Air Traffic Management System (SAATMS). The evaluation established the capacity, safety, and delay performance of the system for the Los Angeles Basin termi...

Evaluating the Effects of Maintenance Resource Management (MRM) Interventions in Airline Safety

DOT National Transportation Integrated Search

1998-02-01

The present paper seeks to describe and validate the effectiveness of five change programs (generically termed Maintenance Resource Management, or "MRM"). The activities evaluated here are in the middle stages of an ongoing MRM training program, or t...

Evaluating the Safety Benefits of a Low-Cost Driving Behavior Management System in Commercial Vehicle Operations

DOT National Transportation Integrated Search

2010-04-01

This project provides an independent evaluation of a commercially available low-cost driving behavior management system. Participating drivers from two carriers (identified as Carrier A and Carrier B) drove an instrumented vehicle for 17 consecutive ...

A randomized, controlled intervention of machine guarding and related safety programs in small metal-fabrication businesses.

PubMed

Parker, David L; Brosseau, Lisa M; Samant, Yogindra; Xi, Min; Pan, Wei; Haugan, David

2009-01-01

Metal fabrication employs an estimated 3.1 million workers in the United States. The absence of machine guarding and related programs such as lockout/tagout may result in serious injury or death. The purpose of this study was to improve machine-related safety in small metal-fabrication businesses. We used a randomized trial with two groups: management only and management-employee. We evaluated businesses for the adequacy of machine guarding (machine scorecard) and related safety programs (safety audit). We provided all businesses with a report outlining deficiencies and prioritizing their remediation. In addition, the management-employee group received four one-hour interactive training sessions from a peer educator. We evaluated 40 metal-fabrication businesses at baseline and 37 (93%) one year later. Of the three nonparticipants, two had gone out of business. More than 40% of devices required for adequate guarding were missing or inadequate, and 35% of required safety programs and practices were absent at baseline. Both measures improved significantly during the course of the intervention. No significant differences in changes occurred between the two intervention groups. Machine-guarding practices and programs improved by up to 13% and safety audit scores by up to 23%. Businesses that added safety committees or those that started with the lowest baseline measures showed the greatest improvements. Simple and easy-to-use assessment tools allowed businesses to significantly improve their safety practices, and safety committees facilitated this process.

Safety in psychiatric inpatient care: The impact of risk management culture on mental health nursing practice.

PubMed

Slemon, Allie; Jenkins, Emily; Bungay, Vicky

2017-10-01

The discourse of safety has informed the care of individuals with mental illness through institutionalization and into modern psychiatric nursing practices. Confinement arose from safety: out of both societal stigma and fear for public safety, as well as benevolently paternalistic aims to protect individuals from self-harm. In this paper, we argue that within current psychiatric inpatient environments, safety is maintained as the predominant value, and risk management is the cornerstone of nursing care. Practices that accord with this value are legitimized and perpetuated through the safety discourse, despite evidence refuting their efficacy, and patient perspectives demonstrating harm. To illustrate this growing concern in mental health nursing care, we provide four exemplars of risk management strategies utilized in psychiatric inpatient settings: close observations, seclusion, door locking and defensive nursing practice. The use of these strategies demonstrates the necessity to shift perspectives on safety and risk in nursing care. We suggest that to re-centre meaningful support and treatment of clients, nurses should provide individualized, flexible care that incorporates safety measures while also fundamentally re-evaluating the risk management culture that gives rise to and legitimizes harmful practices. © 2017 The Authors Nursing Inquiry published by John Wiley & Sons Ltd.

Quality Attribute Techniques Framework

NASA Astrophysics Data System (ADS)

Chiam, Yin Kia; Zhu, Liming; Staples, Mark

The quality of software is achieved during its development. Development teams use various techniques to investigate, evaluate and control potential quality problems in their systems. These “Quality Attribute Techniques” target specific product qualities such as safety or security. This paper proposes a framework to capture important characteristics of these techniques. The framework is intended to support process tailoring, by facilitating the selection of techniques for inclusion into process models that target specific product qualities. We use risk management as a theory to accommodate techniques for many product qualities and lifecycle phases. Safety techniques have motivated the framework, and safety and performance techniques have been used to evaluate the framework. The evaluation demonstrates the ability of quality risk management to cover the development lifecycle and to accommodate two different product qualities. We identify advantages and limitations of the framework, and discuss future research on the framework.

Continental United States Military Housing Inspections Southeast

DTIC Science & Technology

2015-09-24

and safety, including focus on mold, asbestos , radon, lead-based paint, drinking water quality, and pest management. We conducted this inspection in...electrical system safety inspections. In addition, we inspected to EPA standards governing safe drinking water and toxic substances, radon, asbestos , and...inspections focused on mold, asbestos , radon, lead-based paint, drinking water quality, and pest management. We evaluated the associated plans and

Diagnosis of poor safety culture as a major shortcoming in OHSAS 18001-certified companies.

PubMed

Ghahramani, Abolfazl

2017-04-07

The evaluation of safety performance in occupational health and safety assessment series (OHSAS) 18001-certified companies provides useful information about the quality of the management system. A certified organization should employ an adequate level of safety management and a positive safety culture to achieve a satisfactory safety performance. The present study conducted in six manufacturing companies: three OHSAS 18001-certified, and three non-certified to assess occupational health and safety (OHS) as well as OHSAS 18001 practices. The certified companies had a better OHS practices compared with the non-certified companies. The certified companies slightly differed in OHS and OHSAS 18001 practices and one of the certified companies had the highest activity rates for both practices. The results indicated that the implemented management systems have not developed and been maintained appropriately in the certified companies. The in-depth analysis of the collected evidence revealed shortcomings in safety culture improvement in the certified companies. This study highlights the importance of safety culture to continuously improve the quality of OHSAS 18001 and to properly perform OHS/OHSAS 18001 practices in the certified companies.

Diagnosis of poor safety culture as a major shortcoming in OHSAS 18001-certified companies

PubMed Central

GHAHRAMANI, Abolfazl

2016-01-01

The evaluation of safety performance in occupational health and safety assessment series (OHSAS) 18001-certified companies provides useful information about the quality of the management system. A certified organization should employ an adequate level of safety management and a positive safety culture to achieve a satisfactory safety performance. The present study conducted in six manufacturing companies: three OHSAS 18001-certified, and three non-certified to assess occupational health and safety (OHS) as well as OHSAS 18001 practices. The certified companies had a better OHS practices compared with the non-certified companies. The certified companies slightly differed in OHS and OHSAS 18001 practices and one of the certified companies had the highest activity rates for both practices. The results indicated that the implemented management systems have not developed and been maintained appropriately in the certified companies. The in-depth analysis of the collected evidence revealed shortcomings in safety culture improvement in the certified companies. This study highlights the importance of safety culture to continuously improve the quality of OHSAS 18001 and to properly perform OHS/OHSAS 18001 practices in the certified companies. PMID:28025422

49 CFR 192.937 - What is a continual process of evaluation and assessment to maintain a pipeline's integrity?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.937 What is a...

Railway safety climate: a study on organizational development.

PubMed

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

A seven-year intervention to diffuse economic innovations with safety benefits to Wisconsin dairy farmers.

PubMed

Chapman, L J; Brunette, C M; Taveira, A D

2013-07-01

The purpose of this study was to conduct a targeted information dissemination campaign to persuade agricultural managers to adopt more profitable practices that reduce injury hazards compared to traditional practices. The project disseminated information to northeast Wisconsin dairy managers about three production practices that were more profitable and had safety benefits (barn lights, silage bags, and calf feed mixing sites) using information sources that these managers were known to rely on. The project prospectively evaluated rolling, independent, community-based, probability samples (a different group of operations each year) at baseline and after each of seven intervention years. The project also evaluated comparison samples from either Maryland or New York dairy operations after intervention years two through seven. In baseline versus year seven comparisons, the Wisconsin dairy managers reported getting more information about the three practices. Compared to New York managers, Wisconsin managers reported getting more information after year seven about the three practices. Among Wisconsin managers, intervention year was associated with increased adoption of all three practices. Compared to New York managers, Wisconsin managers were more likely to report adopting two of the three practices after year seven. A targeted campaign that disseminated information to managers through traditional channels was associated with increases in manager reports of getting information about, being aware of and adopting profit-enhancing work practices with safety benefits in a high-hazard industry.

Taking up national safety alerts to improve patient safety in hospitals: The perspective of healthcare quality and risk managers.

PubMed

Pfeiffer, Yvonne; Schwappach, David

2016-01-01

National safety alert systems publish relevant information to improve patient safety in hospitals. However, the information has to be transformed into local action to have an effect on patient safety. We studied three research questions: How do Swiss healthcare quality and risk managers (qm/rm(1)) see their own role in learning from safety alerts issued by the Swiss national voluntary reporting and analysis system? What are their attitudes towards and evaluations of the alerts, and which types of improvement actions were fostered by the safety alerts? A survey was developed and applied to Swiss healthcare risk and quality managers, with a response rate of 39 % (n=116). Descriptive statistics are presented. The qm/rm disseminate and communicate with a broad variety of professional groups about the alerts. While most respondents felt that they should know the alerts and their contents, only a part of them felt responsible for driving organizational change based on the recommendations. However, most respondents used safety alerts to back up their own patient safety goals. The alerts were evaluated positively on various dimensions such as usefulness and were considered as standards of good practice by the majority of the respondents. A range of organizational responses was applied, with disseminating information being the most common. An active role is related to using safety alerts for backing up own patient safety goals. To support an active role of qm/rm in their hospital's learning from safety alerts, appropriate organizational structures should be developed. Furthermore, they could be given special information or training to act as an information hub on the issues discussed in the alerts. Copyright © 2016. Published by Elsevier GmbH.

Quantification of the benefits of access management for Kentucky : final report.

DOT National Transportation Integrated Search

2006-07-01

This report describes the benefits quantification performed for the proposed access management plan for Kentucky. This study evaluates the capacity, safety and economic impacts associated with access management programs. The proposed Kentucky access ...

Human Milk Management Redesign: Improving Quality and Safety and Reducing Neonatal Intensive Care Unit Nurse Stress.

PubMed

Settle, Margaret Doyle; Coakley, Amanda Bulette; Annese, Christine Donahue

2017-02-01

Human milk provides superior nutritional value for infants in the neonatal intensive care unit and is the enteral feeding of choice. Our hospital used the system engineering initiative for patient safety model to evaluate the human milk management system in our neonatal intensive care unit. Nurses described the previous process in a negative way, fraught with opportunities for error, increased stress for nurses, and the need to be away from the bedside and their patients. The redesigned process improved the quality and safety of human milk management and created time for the nurses to spend with their patients.

Evaluating North Carolina Food Pantry Food Safety-Related Operating Procedures.

PubMed

Chaifetz, Ashley; Chapman, Benjamin

2015-11-01

Almost one in seven American households were food insecure in 2012, experiencing difficulty in providing enough food for all family members due to a lack of resources. Food pantries assist a food-insecure population through emergency food provision, but there is a paucity of information on the food safety-related operating procedures used in the pantries. Food pantries operate in a variable regulatory landscape; in some jurisdictions, they are treated equivalent to restaurants, while in others, they operate outside of inspection regimes. By using a mixed methods approach to catalog the standard operating procedures related to food in 105 food pantries from 12 North Carolina counties, we evaluated their potential impact on food safety. Data collected through interviews with pantry managers were supplemented with observed food safety practices scored against a modified version of the North Carolina Food Establishment Inspection Report. Pantries partnered with organized food bank networks were compared with those that operated independently. In this exploratory research, additional comparisons were examined for pantries in metropolitan areas versus nonmetropolitan areas and pantries with managers who had received food safety training versus managers who had not. The results provide a snapshot of how North Carolina food pantries operate and document risk mitigation strategies for foodborne illness for the vulnerable populations they serve. Data analysis reveals gaps in food safety knowledge and practice, indicating that pantries would benefit from more effective food safety training, especially focusing on formalizing risk management strategies. In addition, new tools, procedures, or policy interventions might improve information actualization by food pantry personnel.

Safe separation distance score: A new metric for evaluating wildland firefighter safety zones using lidar

Treesearch

Michael J. Campbell; Philip E. Dennison; Bret W. Butler

2016-01-01

Safety zones are areas where firefighters can retreat to in order to avoid bodily harm when threatened by burnover or entrapment from wildland fire. At present, safety zones are primarily designated by firefighting personnel as part of daily fire management activities. Though critical to safety zone assessment, the effectiveness of this approach is inherently limited...

Development of a Universal Safety Behavior Management System for Coal Mine Workers

PubMed Central

LI, Jizu; LI, Yuejiao; LIU, Xiaoguang

2015-01-01

Background: In China, over 80% of all work-related deaths in the mining industry occur in coal mines and human factors constitute 85% of the direct causes of coal mine accidents, which indicates that significant shortcomings currently exist in the safety behavior management of Chinese coal mine workers. We aimed to verify the impact of human psychological behavior in coal mine accidents systematically through experimental study, theoretical analysis and management application. Methods: Four test instruments (Sensory and cognitive capacity test, Sixteen-Personal Factor Questionnaire, Symptom Checklist 90 Questionnaire and the supervisors’ evaluation) were employed from November 2013 to June 2014 to identify unsafe behavior factors, the self-established Questionnaire of Safety Behavior Norms (QSBN) was also used to propose the safety behavior countermeasures of coal mine employees. Results: The mental health of most coal mine workers’ is relatively poor. The sensory and cognitive capacity of those in different work posts varies greatly, as does the sense of responsibility. Workers are susceptible to external influences, and score low in site management. When the 16-PF and SCL-90 sensory and cognitive assessments were combined, the psychological index predictive power was greatest for estimating sense of efficiency and degree of satisfaction in internal evaluations, while at the same time lowest for estimating control of introversion-extroversion and stress character. Conclusion: The psychological indicators can predict part of employee safety behavior, and assist a coal mine enterprise to recruit staff, develop occupational safety norms and improve the working environment. PMID:26258088

[Organisational responsibility versus individual responsibility: safety culture? About the relationship between patient safety and medical malpractice law].

PubMed

Hart, Dieter

2009-01-01

The contribution is concerned with the correlations between risk information, patient safety, responsibility and liability, in particular in terms of liability law. These correlations have an impact on safety culture in healthcare, which can be evaluated positively if--in addition to good quality of medical care--as many sources of error as possible can be identified, analysed, and minimised or eliminated by corresponding measures (safety or risk management). Liability influences the conduct of individuals and enterprises; safety is (probably) also a function of liability; this should also apply to safety culture. The standard of safety culture does not only depend on individual liability for damages, but first of all on strict enterprise liability (system responsibility) and its preventive effects. Patient safety through quality and risk management is therefore also an organisational programme of considerable relevance in terms of liability law.

Evaluation of the US Department of Energy's occupational safety and health program for its government-owned contractor-operated facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to present to Secretary of Energy James Watkins the findings and recommendations of the Occupational Safety and Health Administration's (OSHA) evaluation of the Department of Energy's (DOE) programs for worker safety and health at DOE's government-owned contractor-operated (GOCO) nuclear facilities. The OSHA evaluation is based on an intensive and comprehensive review and analysis of DOE's worker safety and health programs including: written programs; safety and health inspection programs; and the adequacy of resource, training, and management controls. The evaluation began on April 10, 1990 and involved over three staff years before its conclusion. Themore » evaluation was initiated by former Secretary of Labor Elizabeth Dole in response to Secretary of Energy James Watkins' request that OSHA assist him in determining the actions needed to assure that DOE has an exemplary safety and health program in place at its GOCOs. 6 figs.« less

[Significance of re-evaluation and development of Chinese herbal drugs].

PubMed

Gao, Yue; Ma, Zengchun; Zhang, Boli

2012-01-01

The research of new herbal drugs involves in new herbal drugs development and renew the old drugs. It is necessary to research new herbal drugs based on the theory of traditional Chinese medicine (TCM). The current development of famous TCM focuses on the manufacture process, quality control standards, material basis and clinical research. But system management of security evaluation is deficient, the relevant system for the safety assessment TCM has not been established. The causes of security problems, security risks, target organ of toxicity, weak link of safety evaluation, and ideas of safety evaluation are discussed in this paper. The toxicology research of chinese herbal drugs is necessary based on standard of good laboratory practices (GLP), the characteristic of Chinese herbal drugs is necessary to be fully integrated into safety evaluation. The safety of new drug research is necessary to be integrated throughout the entire process. Famous Chinese medicine safety research must be paid more attention in the future.

GEDOS-SECOT consensus on the care process of patients with knee osteoarthritis and arthoplasty.

PubMed

Ruiz Iban, M A; Tejedor, A; Gil Garay, E; Revenga, C; Hermosa, J C; Montfort, J; Peña, M J; López Millán, J M; Montero Matamala, A; Capa Grasa, A; Navarro, M J; Gobbo, M; Loza, E

To develop recommendations on the evaluation and management procedure in patients undergoing total knee replacement based on best evidence and the experience of a panel of experts. A multidisciplinary group of 12 experts was selected that defined the scope, users and the document parts. Three systematic reviews were performed in patients undergoing knee replacement: (i)efficacy and safety of fast-tracks; (ii)efficacy and safety of cognitive interventions in patients with catastrophic pain, and (iii) efficacy and safety of acute post-surgical pain management on post-surgical outcomes. A narrative review was conducted on the evaluation and management of pain sensitization, and about the efficacy and safety of pre-surgical physiotherapy. The experts generated the recommendations and explicative text. The level of agreement was evaluated in a multidisciplinary group of 85 experts with the Delphi technique. The level of evidence was established as well for each recommendation. A total of 20 recommendations were produced. An agreement higher than 80% was reached in all of them. We found the highest agreement on the need for a full discharge report, on providing proper information about the process and on following available guidelines. There is consensus among professionals involved in the management of patients undergoing total knee replacement, in that it is important to protocolize the replacement process, performing a proper, integrated and coordinated patient evaluation and follow-up, paying special attention to the surgical procedure and postoperative period. Copyright © 2017 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.

Ergonomics: CTD management evaluation tool.

PubMed

Ostendorf, J S; Rogers, B; Bertsche, P K

2000-01-01

Cumulative trauma disorder (CTD) occurrences peaked in number in 1994 and although decreasing in 1995, still accounted for 62% of all illness cases reported. A CTD Management Evaluation Tool was developed to assist Occupational Safety and Health Compliance Officers (CSHOs) in program evaluation and documentation of the occupational health management component and the need for an ergonomics program. Occupational and environmental health nurses may use the tool not only to reduce and prevent CTD occurrences, but also as a benchmark for program evaluation.

Evaluation of Safety, Quality and Productivity in Construction

NASA Astrophysics Data System (ADS)

Usmen, M. A.; Vilnitis, M.

2015-11-01

This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

[Comprehensive evaluation of protective measures in electric welding].

PubMed

Ye, K; Zhao, Z

1995-03-01

Protective effects of safety masks, eyewear, work clothes, gloves, periodically physical examination system, and ventilation and barriers at workplace, were evaluated by one-way analysis for handtorch welding, carbon dioxide gas-protective welding, and argon-arc welding operations, etc. in township and village enterprises and state-owned enterprises by interviewing managers in the departments of technology and work safety and field investigating. Based on the results of one-way analysis of protective measures, comprehensive evaluations of various enterprises were made with a fussy mathematical model. Both enterprises in township and village level and of state-owned were graded as A on a basis of the evaluation, which will be helpful to the better management of occupational health in the future.

Monitoring product safety in the postmarketing environment.

PubMed

Sharrar, Robert G; Dieck, Gretchen S

2013-10-01

The safety profile of a medicinal product may change in the postmarketing environment. Safety issues not identified in clinical development may be seen and need to be evaluated. Methods of evaluating spontaneous adverse experience reports and identifying new safety risks include a review of individual reports, a review of a frequency distribution of a list of the adverse experiences, the development and analysis of a case series, and various ways of examining the database for signals of disproportionality, which may suggest a possible association. Regulatory agencies monitor product safety through a variety of mechanisms including signal detection of the adverse experience safety reports in databases and by requiring and monitoring risk management plans, periodic safety update reports and postauthorization safety studies. The United States Food and Drug Administration is working with public, academic and private entities to develop methods for using large electronic databases to actively monitor product safety. Important identified risks will have to be evaluated through observational studies and registries.

Vessel traffic safety in busy waterways: A case study of accidents in western shenzhen port.

PubMed

Mou, J M; Chen, P F; He, Y X; Yip, Tsz Leung; Li, W H; Tang, J; Zhang, H Z

2016-08-03

Throughout the world, busy waterways near large ports witness heavy vessel traffic in recent decades. The waterways are characterized by high risk in terms of loss of life, property, and pollution to environment. To facilitate maritime safety management with satisfactory efficiency and efficacy, the authors propose a framework of safety indexes to evaluate the risk level in busy waterways according to the accident severity, fatality rate and special indicators of maritime transportation. The safety indexes consist of Safety Evaluation Index (SEI) and Safety Warning Index (SWI), and are derived from the proposed risk criteria of Chinese vessel traffic. As a case study, data on vessel traffic accidents reported in the Western Shenzhen Port, South China from 1995 to 2015 are analyzed. The actual risk level of this area during the period is calculated under the framework. The implementation of the safety indexes indicate that the risk criteria and safety indexes are practicable and effective for the vessel traffic management. The methodology based on long-term accident data can significantly support the risk analysis in the macroscopic perspective for busy ports and waterways, such that SWI can act as threshold to trigger actions, while SEI can act as an indicator to measure safety status. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Study of the System Safety Concept as it Relates to the New Walter Reed Army Medical Center, Washington, DC.

DTIC Science & Technology

1978-03-31

established the safety level of the% * originally designed facility and the extent of current safety * modifications. The objectives evaluated the...Program could identify many safety hazards thus leading to design improvements. The study provided several recommendations to formalize the Systems Safety... design , construction, and proposed systems management of the new Walter Reed Army Medical Center (WRAMC), Washington, D.C., was conducted during the

Space station pressurized laboratory safety guidelines

NASA Technical Reports Server (NTRS)

Mcgonigal, Les

1990-01-01

Before technical safety guidelines and requirements are established, a common understanding of their origin and importance must be shared between Space Station Program Management, the User Community, and the Safety organizations involved. Safety guidelines and requirements are driven by the nature of the experiments, and the degree of crew interaction. Hazard identification; development of technical safety requirements; operating procedures and constraints; provision of training and education; conduct of reviews and evaluations; and emergency preplanning are briefly discussed.

29 CFR 1952.154 - Final approval determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... determined that in operation the State of North Carolina's occupational safety and health program is at least...-State Integrated Management Information System, the Assistant Secretary evaluated actual operations...

A model study of the Haihe river passenger ferry risk based on AHP

NASA Astrophysics Data System (ADS)

Du, Jinyin; Xu, Yanming; Du, Chunzhi; Jin, Zhenhua

2017-05-01

The core function of maritime is water safety supervision, whose emphasis and difficulty is ferry. In combination with the practical situation of Haihe river passenger ferry operation management, this paper analyzes Haihe river passenger ferry risk from four aspects "human, machinery, environment and management", and establishes the ferry risk index system. By using AHP (Analytic Hierarchy Process), the ferry risk evaluation model is established. By using the ferry model, the application of Ferry Zhengyanfa7 in Tianjin Haihe river crossing is evaluated, whose safety situation is verified to be between "relatively high risk" and "high risk".

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

PubMed

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

PubMed

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Duties and functions of veterinary public health for the management of food safety: present needs and evaluation of efficiency.

PubMed

Trevisani, M; Rosmini, R

2008-09-01

Functions of veterinarians in the context of food safety assurance have changed very much in the last ten years as a consequence of new legislation. The aim of this review is to evaluate the management tools in veterinary public health that shall be used in response to the actual need and consider some possible key performance indicators. This review involved an examination of the legislation, guidelines and literature, which was then discussed to analyse the actual need, the strategies and the procedures with which the public veterinary service shall comply. The management of information gathered at different stages of the food chain, from both food production operators and veterinary inspectors operating in primary production, food processing and feed production should be exchanged and integrated in a database, not only to produce annual reports and plan national sampling plans, but also to verify and validate the effectiveness of procedures and strategies implemented by food safety operators to control risks. Further, the surveillance data from environmental agencies and human epidemiological units should be used for assessing risks and addressing management options.

Road Infrastructure Safety Management in Poland

NASA Astrophysics Data System (ADS)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road stretch, road section, junction, etc.). The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions. This work has added to the Polish experience of preparing and implementing such tools within the competent road authorities.

E2C(R2) Periodic Benefit-Risk Evaluation Report and E2C(R2) Periodic Benefit-Risk Evaluation Report--Questions and Answers; International Council for Harmonisation; Guidances for Industry; Availability. Notice.

PubMed

2016-07-19

The Food and Drug Administration (FDA or Agency) is announcing the availability of guidances for industry entitled ``E2C(R2) Periodic Benefit-Risk Evaluation'' (E2C(R2) guidance) and ``E2C(R2) Periodic Benefit-Risk Evaluation Report--Questions and Answers'' (E2C(R2) Q&A guidance). These guidances were prepared under the auspices of the International Council for Harmonisation (ICH), formerly the International Conference on Harmonisation. The E2C(R2) draft guidance, issued April 11, 2012, updated and combined two ICH guidances, ``E2C Clinical Safety Data Management: Periodic Safety Update Reports for Marketed Drugs'' (E2C guidance) and ``Addendum to E2C Clinical Safety Data Management: Periodic Safety Update Reports for Marketed Drugs'' (addendum to the E2C guidance). The E2C(R2) guidance is intended to describe the format, content, and timing of a Periodic Benefit-Risk Evaluation Report (PBRER) for an approved drug or biologic, and it finalizes the draft guidance. The E2C(R2) Q&A guidance is a supplementary guidance that is intended to clarify key issues in the E2C(R2) guidance.

Estimating and controlling workplace risk: an approach for occupational hygiene and safety professionals.

PubMed

Toffel, Michael W; Birkner, Lawrence R

2002-07-01

The protection of people and physical assets is the objective of health and safety professionals and is accomplished through the paradigm of anticipation, recognition, evaluation, and control of risks in the occupational environment. Risk assessment concepts are not only used by health and safety professionals, but also by business and financial planners. Since meeting health and safety objectives requires financial resources provided by business and governmental managers, the hypothesis addressed here is that health and safety risk decisions should be made with probabilistic processes used in financial decision-making and which are familiar and recognizable to business and government planners and managers. This article develops the processes and demonstrates the use of incident probabilities, historic outcome information, and incremental impact analysis to estimate risk of multiple alternatives in the chemical process industry. It also analyzes how the ethical aspects of decision-making can be addressed in formulating health and safety risk management plans. It is concluded that certain, easily understood, and applied probabilistic risk assessment methods used by business and government to assess financial and outcome risk have applicability to improving workplace health and safety in three ways: 1) by linking the business and health and safety risk assessment processes to securing resources, 2) by providing an additional set of tools for health and safety risk assessment, and 3) by requiring the risk assessor to consider multiple risk management alternatives.

Evaluation of safety climate and employee injury rates in healthcare.

PubMed

Cook, Jacqueline M; Slade, Martin D; Cantley, Linda F; Sakr, Carine J

2016-09-01

Safety climates that support safety-related behaviour are associated with fewer work-related injuries, and prior research in industry suggests that safety knowledge and motivation are strongly related to safety performance behaviours; this relationship is not well studied in healthcare settings. We performed analyses of survey results from a Veterans Health Administration (VHA) Safety Barometer employee perception survey, conducted among VHA employees in 2012. The employee perception survey assessed 6 safety programme categories, including management participation, supervisor participation, employee participation, safety support activities, safety support climate and organisational climate. We examined the relationship between safety climate from the survey results on VHA employee injury and illness rates. Among VHA facilities in the VA New England Healthcare System, work-related injury rate was significantly and inversely related to overall employee perception of safety climate, and all 6 safety programme categories, including employee perception of employee participation, management participation, organisational climate, supervisor participation, safety support activities and safety support climate. Positive employee perceptions of safety climate in VHA facilities are associated with lower work-related injury and illness rates. Employee perception of employee participation, management participation, organisational climate, supervisor participation, safety support activities and safety support climate were all associated with lower work-related injury rates. Future implications include fostering a robust safety climate for patients and healthcare workers to reduce healthcare worker injuries. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Development of an effective risk management system in a teaching hospital.

PubMed

Adibi, Hossein; Khalesi, Nader; Ravaghi, Hamid; Jafari, Mahdi; Jeddian, Ali Reza

2012-09-21

Unsafe health care provision is a main cause of increased mortality rate amongst hospitalized patients all over the world. A system approach to medical error and its reduction is crucial that is defined by clinical and administrative activities undertaken to identify, evaluate, and reduce the risk of injury. The aim of this study was to develop and implement a risk management system in a large teaching hospital in Iran, especially of the basis of WHO guidelines and patient safety context. WHO draft guideline and patient safety reports from different countries were reviewed for defining acceptable framework of risk management system. Also current situation of mentioned hospital in safety matter and dimensions of patient safety culture was evaluated using HSOPSC questionnaire of AHRQ. With adjustment of guidelines and hospital status, the conceptual framework was developed and next it was validated in expert panel. The members of expert panel were selected according to their role and functions and also their experiences in risk management and patient safety issues. The validated framework consisted of designating a leader and coordinator core, defining communications, and preparing the infrastructure for patient safety education and culture-building. That was developed on the basis of some values and commitments and included reactive and proactive approaches. The findings of reporting activities demonstrated that at least 3.6 percent of hospitalized patients have experienced adverse events and 5.3 percent of all deaths in the hospital related with patient safety problems. Beside the average score of 12 dimensions of patient safety culture was 46.2 percent that was considerably low. The "non-punitive responses to error" had lowest positive score with 21.2 percent. It is of paramount importance for all health organizations to lay necessary foundations in order to identify safety risks and improve the quality of care. Inadequate participation of staff in education, reporting and analyzing, underreporting and uselessness of aggregated data, limitation of human and financial resources, punitive directions and management challenges for solutions were the main executive problems which could affect the effectiveness of system.

Innovations for the future of pharmacovigilance.

PubMed

Almenoff, June S

2007-01-01

Post-marketing pharmacovigilance involves the review and management of safety information from many sources. Among these sources, spontaneous adverse event reporting systems are among the most challenging and resource-intensive to manage. Traditionally, efforts to monitor spontaneous adverse event reporting systems have focused on review of individual case reports. The science of pharmacovigilance could be enhanced with the availability of systems-based tools that facilitate analysis of aggregate data for purposes of signal detection, signal evaluation and knowledge management. GlaxoSmithKline (GSK) recently implemented Online Signal Management (OSM) as a data-driven framework for managing the pharmacovigilance of marketed products. This pioneering work builds upon the strong history GSK has of innovation in this area. OSM is a software application co-developed by GSK and Lincoln Technologies that integrates traditional pharmacovigilance methods with modern quantitative statistical methods and data visualisation tools. OSM enables the rapid identification of trends from the individual adverse event reports received by GSK. OSM also provides knowledge-management tools to ensure the successful tracking of emerging safety issues. GSK has developed standard procedures and 'best practices' around the use of OSM to ensure the systematic evaluation of complex safety datasets. In summary, the implementation of OSM provides new tools and efficient processes to advance the science of pharmacovigilance.

Aviation's Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial.

PubMed

Bennett, Simon A

2017-01-01

A National Health Service (NHS) contingent liability for medical error claims of over £26 billion. To evaluate the safety management and educational benefits of adapting aviation's Normal Operations Safety Audit (NOSA) to health care. In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. The data revealed a threat-rich environment, where errors - some consequential - were made (359 threats and 86 errors were recorded over 2 weeks). The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1) the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2) the participating NHS Trusts be encouraged to act on students' findings; and 3) the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool.

Implementation of Recommendations from the One System Comparative Evaluation of the Hanford Tank Farms and Waste Treatment Plant Safety Bases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrett, Richard L.; Niemi, Belinda J.; Paik, Ingle K.

2013-11-07

A Comparative Evaluation was conducted for One System Integrated Project Team to compare the safety bases for the Hanford Waste Treatment and Immobilization Plant Project (WTP) and Tank Operations Contract (TOC) (i.e., Tank Farms) by an Expert Review Team. The evaluation had an overarching purpose to facilitate effective integration between WTP and TOC safety bases. It was to provide One System management with an objective evaluation of identified differences in safety basis process requirements, guidance, direction, procedures, and products (including safety controls, key safety basis inputs and assumptions, and consequence calculation methodologies) between WTP and TOC. The evaluation identified 25more » recommendations (Opportunities for Integration). The resolution of these recommendations resulted in 16 implementation plans. The completion of these implementation plans will help ensure consistent safety bases for WTP and TOC along with consistent safety basis processes. procedures, and analyses. and should increase the likelihood of a successful startup of the WTP. This early integration will result in long-term cost savings and significant operational improvements. In addition, the implementation plans lead to the development of eight new safety analysis methodologies that can be used at other U.S. Department of Energy (US DOE) complex sites where URS Corporation is involved.« less

Managing Field Evacuations.

ERIC Educational Resources Information Center

Satz, Jay A.; McEvoy, David; Merrill, Kurt

In the event of a debilitating injury or illness, outdoor leaders should consider four critical phases in successfully managing backcountry field evaluations. The first phase, managing the immediate scene, involves assuring scene safety, medical care of the patient, instituting the emergency response plan, and providing for the needs of uninjured…

75 FR 36427 - Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-25

... indication for the treatment of fibromyalgia for patients 18 years of age and older . The safety and efficacy findings for sodium oxybate in the fibromyalgia population and the proposed Risk Evaluation and Mitigation...

Evaluation of fleet management techniques for timber highway bridges

Treesearch

Brent M. Phares; Travis K. Hosteng; Justin Dahlberg; Michael A. Ritter

2011-01-01

The general condition of the nation's bridges presents a complex management issue when considering cost, safety, and time. Consequently, the management of those bridges can become an overwhelming task. The need for a management system that is specific to rural systems may help to improve the management of this significant number of bridges. Although individual...

Tools and Techniques for Evaluating the Effects of Maintenance Resource Management (MRM) in Air Safety

NASA Technical Reports Server (NTRS)

Taylor, James C.

2002-01-01

This research project was designed as part of a larger effort to help Human Factors (HF) implementers, and others in the aviation maintenance community, understand, evaluate, and validate the impact of Maintenance Resource Management (MRM) training programs, and other MRM interventions; on participant attitudes, opinions, behaviors, and ultimately on enhanced safety performance. It includes research and development of evaluation methodology as well as examination of psychological constructs and correlates of maintainer performance. In particular, during 2001, three issues were addressed. First a prototype process for measuring performance was developed and used. Second an automated calculator was developed to aid the HF implementer user in analyzing and evaluating local survey data. These results include being automatically compared with the experience from all MRM programs studied since 1991. Third the core survey (the Maintenance Resource Management Technical Operations Questionnaire, or 'MRM/TOQ') was further developed and tested to include topics of added relevance to the industry.

Integrated risk assessment and screening analysis of drinking water safety of a conventional water supply system.

PubMed

Sun, F; Chen, J; Tong, Q; Zeng, S

2007-01-01

Management of drinking water safety is changing towards an integrated risk assessment and risk management approach that includes all processes in a water supply system from catchment to consumers. However, given the large number of water supply systems in China and the cost of implementing such a risk assessment procedure, there is a necessity to first conduct a strategic screening analysis at a national level. An integrated methodology of risk assessment and screening analysis is thus proposed to evaluate drinking water safety of a conventional water supply system. The violation probability, indicating drinking water safety, is estimated at different locations of a water supply system in terms of permanganate index, ammonia nitrogen, turbidity, residual chlorine and trihalomethanes. Critical parameters with respect to drinking water safety are then identified, based on which an index system is developed to prioritize conventional water supply systems in implementing a detailed risk assessment procedure. The evaluation results are represented as graphic check matrices for the concerned hazards in drinking water, from which the vulnerability of a conventional water supply system is characterized.

A review of health and safety leadership and managerial practices on modern dairy farms.

PubMed

Hagevoort, G Robert; Douphrate, David I; Reynolds, Stephen J

2013-01-01

As modern dairy operations around the world expand, farmers are increasingly reliant on greater automation and larger numbers of hired labor to milk cows and perform other essential farm tasks. Dairy farming is among the most dangerous occupations, with high rates of injury, illness, and employee turnover. Lower education levels, illiteracy, and limited language proficiency increase the possibility of injury or death associated with higher risk occupations such as dairy. Sustaining a healthy, productive workforce is a critical component of risk management; however, many owners and managers have not received formal training in employee management or occupational health and safety. Optimal dairy farming management should address milk production that is sustainable and responsible from the animal welfare, social, economic, and environmental perspectives. Each of these aspects is interdependent with each other and with a sustainable, healthy, productive workforce. Very few studies address the effectiveness of risk management in the dairy industry. Studies suggest that labor management practices are a potential competitive advantage for dairy farms, but the connection with efficiency, productivity, and profitability has not been clearly demonstrated. Transformational leadership has been associated with improved safety climate and reduced incidence of injury, whereas passive leadership styles have opposite effects. There is a need to develop and evaluate the effectiveness of safety-specific transformational leadership among dairy owners and managers. A systematic approach to risk management should address worker health and safety as an integral component of production, food safety, and animal welfare. A successful program must address the cultural and linguistic barriers associated with immigrant workers.

[Process design in high-reliability organizations].

PubMed

Sommer, K-J; Kranz, J; Steffens, J

2014-05-01

Modern medicine is a highly complex service industry in which individual care providers are linked in a complicated network. The complexity and interlinkedness is associated with risks concerning patient safety. Other highly complex industries like commercial aviation have succeeded in maintaining or even increasing its safety levels despite rapidly increasing passenger figures. Standard operating procedures (SOPs), crew resource management (CRM), as well as operational risk evaluation (ORE) are historically developed and trusted parts of a comprehensive and systemic safety program. If medicine wants to follow this quantum leap towards increased patient safety, it must intensively evaluate the results of other high-reliability industries and seek step-by-step implementation after a critical assessment.

Evaluating the Clinical Learning Environment: Resident and Fellow Perceptions of Patient Safety Culture.

PubMed

Bump, Gregory M; Calabria, Jaclyn; Gosman, Gabriella; Eckart, Catherine; Metro, David G; Jasti, Harish; McCausland, Julie B; Itri, Jason N; Patel, Rita M; Buchert, Andrew

2015-03-01

The Accreditation Council for Graduate Medical Education has begun to evaluate teaching institutions' learning environments with Clinical Learning Environment Review visits, including trainee involvement in institutions' patient safety and quality improvement efforts. We sought to address the dearth of metrics that assess trainee patient safety perceptions of the clinical environment. Using the Hospital Survey on Patient Safety Culture (HSOPSC), we measured resident and fellow perceptions of patient safety culture in 50 graduate medical education programs at 10 hospitals within an integrated health system. As institution-specific physician scores were not available, resident and fellow scores on the HSOPSC were compared with national data from 29 162 practicing providers at 543 hospitals. Of the 1337 residents and fellows surveyed, 955 (71.4%) responded. Compared with national practicing providers, trainees had lower perceptions of patient safety culture in 6 of 12 domains, including teamwork within units, organizational learning, management support for patient safety, overall perceptions of patient safety, feedback and communication about error, and communication openness. Higher perceptions were observed for manager/supervisor actions promoting patient safety and for staffing. Perceptions equaled national norms in 4 domains. Perceptions of patient safety culture did not improve with advancing postgraduate year. Trainees in a large integrated health system have variable perceptions of patient safety culture, as compared with national norms for some practicing providers. Administration of the HSOPSC was feasible and acceptable to trainees, and may be used to track perceptions over time.

Evaluating the Clinical Learning Environment: Resident and Fellow Perceptions of Patient Safety Culture

PubMed Central

Bump, Gregory M.; Calabria, Jaclyn; Gosman, Gabriella; Eckart, Catherine; Metro, David G.; Jasti, Harish; McCausland, Julie B.; Itri, Jason N.; Patel, Rita M.; Buchert, Andrew

2015-01-01

Background The Accreditation Council for Graduate Medical Education has begun to evaluate teaching institutions' learning environments with Clinical Learning Environment Review visits, including trainee involvement in institutions' patient safety and quality improvement efforts. Objective We sought to address the dearth of metrics that assess trainee patient safety perceptions of the clinical environment. Methods Using the Hospital Survey on Patient Safety Culture (HSOPSC), we measured resident and fellow perceptions of patient safety culture in 50 graduate medical education programs at 10 hospitals within an integrated health system. As institution-specific physician scores were not available, resident and fellow scores on the HSOPSC were compared with national data from 29 162 practicing providers at 543 hospitals. Results Of the 1337 residents and fellows surveyed, 955 (71.4%) responded. Compared with national practicing providers, trainees had lower perceptions of patient safety culture in 6 of 12 domains, including teamwork within units, organizational learning, management support for patient safety, overall perceptions of patient safety, feedback and communication about error, and communication openness. Higher perceptions were observed for manager/supervisor actions promoting patient safety and for staffing. Perceptions equaled national norms in 4 domains. Perceptions of patient safety culture did not improve with advancing postgraduate year. Conclusions Trainees in a large integrated health system have variable perceptions of patient safety culture, as compared with national norms for some practicing providers. Administration of the HSOPSC was feasible and acceptable to trainees, and may be used to track perceptions over time. PMID:26217435

Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

PubMed

Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

2007-01-01

The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

Development and Pilot Testing of a Food Safety Curriculum for Managers and Staff of Residential Childcare Institutions (RCCIs)

ERIC Educational Resources Information Center

Pivarnik, Lori F.; Patnoad, Martha S.; Nyachuba, David; McLandsborough, Lynne; Couto, Stephen; Hagan, Elsina E.; Breau, Marti

2013-01-01

Food safety training materials, targeted for residential childcare institution (RCCI) staff of facilities of 20 residents or less, were developed, piloted, and evaluated. The goal was to assist in the implementation of a Hazard Analysis Critical Control Points (HACCP)-based food safety plan as required by Food and Nutrition Service/United States…

Self-Reported Changes in Food Safety Behaviors among Foodservice Employees: Impact of a Retail Food Safety Education Program

ERIC Educational Resources Information Center

Anding, Jenna D.; Boleman, Chris; Thompson, Britta

2007-01-01

A food safety education program developed for retail food establishments was evaluated to assess the extent to which participants were practicing selected behaviors linked to reducing the risk of foodborne disease both before and after the program. Scores from the state health department's Certified Food Manager (CFM) exam also were examined.…

A combined intervention to reduce interruptions during medication preparation and double-checking: a pilot-study evaluating the impact of staff training and safety vests.

PubMed

Huckels-Baumgart, Saskia; Niederberger, Milena; Manser, Tanja; Meier, Christoph R; Meyer-Massetti, Carla

2017-10-01

The aim was to evaluate the impact of staff training and wearing safety vests as a combined intervention on interruptions during medication preparation and double-checking. Interruptions and errors during the medication process are common and an important issue for patient safety in the hospital setting. We performed a pre- and post-intervention pilot-study using direct structured observation of 26 nurses preparing and double-checking 431 medication doses (225 pre-intervention and 206 post-intervention) for 36 patients (21 pre-intervention and 15 post-intervention). With staff training and the introduction of safety vests, the interruption rate during medication preparation was reduced from 36.8 to 28.3 interruptions per hour and during double-checking from 27.5 to 15 interruptions per hour. This pilot-study showed that the frequency of interruptions decreased during the critical tasks of medication preparation and double-checking after the introduction of staff training and wearing safety vests as part of a quality improvement process. Nursing management should acknowledge interruptions as an important factor potentially influencing medication safety. Unnecessary interruptions can be successfully reduced by considering human and system factors and increasing both staff and nursing managers' awareness of 'interruptive communication practices' and implementing physical barriers. This is the first pilot-study specifically evaluating the impact of staff training and wearing safety vests on the reduction of interruptions during medication preparation and double-checking. © 2017 John Wiley & Sons Ltd.

Behavior based safety. A different way of looking at an old problem.

PubMed

Haney, L; Anderson, M

1999-09-01

1. The occupational and environmental health nurse role in behavioral safety initiatives can very to include: serving as a leader, change agent, collaborator with safety professionals, consultant, team participant, educator, coach, and supporter to employees and management. 2. Behavior based safety and health initiatives add to existing knowledge and techniques for improving the health and safety of workers. 3. Behavior based safety relies on employee involvement and places a strong emphasis on observation, measurement, feedback, positive reinforcement, and evaluation. It focuses on identification of system improvements and prevention.

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. L. Sharp; R. T. McCracken

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzedmore » in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR safety basis. The need for a design basis reconstitution program for the ATR has been identified along with the use of sound configuration management principles in order to support safe and efficient facility operation.« less

Determining the causal relationships among balanced scorecard perspectives on school safety performance: case of Saudi Arabia.

PubMed

Alolah, Turki; Stewart, Rodney A; Panuwatwanich, Kriengsak; Mohamed, Sherif

2014-07-01

In the public schools of many developing countries, numerous accidents and incidents occur because of poor safety regulations and management systems. To improve the educational environment in Saudi Arabia, the Ministry of Education seeks novel approaches to measure school safety performance in order to decrease incidents and accidents. The main objective of this research was to develop a systematic approach for measuring Saudi school safety performance using the balanced scorecard framework philosophy. The evolved third generation balanced scorecard framework is considered to be a suitable and robust framework that captures the system-wide leading and lagging indicators of business performance. The balanced scorecard architecture is ideal for adaptation to complex areas such as safety management where a holistic system evaluation is more effective than traditional compartmentalised approaches. In developing the safety performance balanced scorecard for Saudi schools, the conceptual framework was first developed and peer-reviewed by eighteen Saudi education experts. Next, 200 participants, including teachers, school executives, and Ministry of Education officers, were recruited to rate both the importance and the performance of 79 measurement items used in the framework. Exploratory factor analysis, followed by the confirmatory partial least squares method, was then conducted in order to operationalise the safety performance balanced scorecard, which encapsulates the following five salient perspectives: safety management and leadership; safety learning and training; safety policy, procedures and processes; workforce safety culture; and safety performance. Partial least squares based structural equation modelling was then conducted to reveal five significant relationships between perspectives, namely, safety management and leadership had a significant effect on safety learning and training and safety policy, procedures and processes, both safety learning and training and safety policy, procedures and processes had significant effects on workforce safety culture, and workforce safety culture had a significant effect on safety performance. Copyright © 2014 Elsevier Ltd. All rights reserved.

77 FR 49859 - Proposed Traffic Records Program Assessment Advisory

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... States on the collection, management, and analysis of data used to inform highway and traffic safety... prioritize traffic safety issues and to choose appropriate countermeasures and evaluate their effectiveness. This document provides information on the contents, capabilities, and data quality attributes of an...

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan.

PubMed

Lee, Yii-Ching; Zeng, Pei-Shan; Huang, Chih-Hsuan; Wu, Hsin-Hung

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored.

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan

PubMed Central

Zeng, Pei-Shan; Huang, Chih-Hsuan

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored. PMID:29686825

Software for occupational health and safety risk analysis based on a fuzzy model.

PubMed

Stefanovic, Miladin; Tadic, Danijela; Djapan, Marko; Macuzic, Ivan

2012-01-01

Risk and safety management are very important issues in healthcare systems. Those are complex systems with many entities, hazards and uncertainties. In such an environment, it is very hard to introduce a system for evaluating and simulating significant hazards. In this paper, we analyzed different types of hazards in healthcare systems and we introduced a new fuzzy model for evaluating and ranking hazards. Finally, we presented a developed software solution, based on the suggested fuzzy model for evaluating and monitoring risk.

[Monitoring evaluation system for high-specialty hospitals].

PubMed

Fajardo Dolci, Germán; Aguirre Gas, Héctor G; Robledo Galván, Héctor

2011-01-01

Hospital evaluation is a fundamental process to identify medical units' objective compliance, to analyze efficiency of resource use and allocation, institutional values and mission alignment, patient safety and quality standards, contributions to research and medical education, and the degree of coordination among medical units and the health system as a whole. We propose an evaluation system for highly specialized regional hospitals through the monitoring of performance indicators. The following are established as base thematic elements in the construction of indicators: safe facilities and equipment, financial situation, human resources management, policy management, organizational climate, clinical activity, quality and patient safety, continuity of care, patients' and providers' rights and obligations, teaching, research, social responsibility, coordination mechanisms. Monitoring refers to the planned and systematic evaluation of valid and reliable indicators, aimed at identifying problems and opportunity areas. Moreover, evaluation is a powerful tool to strengthen decision-making and accountability in medical units.

Making patient safety the focus: crisis resource management in the undergraduate curriculum.

PubMed

Flanagan, Brendan; Nestel, Debra; Joseph, Michele

2004-01-01

This paper examines the role of high fidelity simulation and crisis resource management in bridging the gap between theory and practice. Patient safety is fundamental to healthcare professional practice and is a common goal for healthcare providers. It provides a focus to motivate practitioners. Patient safety issues are not a priority in undergraduate curricula. Raising the profile at this level is crucial to improving the safety and quality of healthcare delivery. This paper explores the role of simulation in providing a realistic, safe environment for participants with different levels of experience to manage evolving crises in the context of their work environment. The Southern Health Simulation and Skills Centre uses a patient safety focus in delivering a specialised educational programme adapted from aviation to healthcare. The programme, crisis resource management, enables participants to consolidate knowledge, attitudes and skills to achieve a deeper understanding of how their performance impacts on patient safety and the quality of healthcare provided. Self-reported written evaluation data was collected from participants of three different courses at Southern Health. Participants consistently report that these courses offer unique learning experiences that address aspects of workplace learning in ways that have not previously been possible. A video-assisted reflective process powerfully reinforces learning. Crisis resource management courses demonstrate the value of simulation in bridging the gap between 'knowing' and 'doing' and keeping the focus on patient safety. Recommendations are made for ways in which the core elements of crisis resource management philosophy can influence the conceptualization of a new medical curriculum.

An evaluation of a new instrument to measure organisational safety culture values and practices.

PubMed

Díaz-Cabrera, D; Hernández-Fernaud, E; Isla-Díaz, R

2007-11-01

The main aim of this research is to evaluate a safety culture measuring instrument centred upon relevant organisational values and practices related to the safety management system. Seven dimensions that reflect underlying safety meanings are proposed. A second objective is to explore the four cultural orientations in the field of safety arising from the competing values framework. The study sample consisted of 299 participants from five companies in different sectors. The results show six dimensions of organisational values and practices and different company profiles in the organisations studied. The four cultural orientations proposed by the competing values framework are not confirmed. Nevertheless, a coexistence of diverse cultural orientations or paradoxes in the companies is observed.

A Framework to Evaluate Wildlife Feeding in Research, Wildlife Management, Tourism and Recreation

PubMed Central

Dubois, Sara; Fraser, David

2013-01-01

Simple Summary Human feeding of wildlife is a world-wide phenomenon with very diverse effects on conservation, animal welfare and public safety. From a review of the motivations, types and consequences of wildlife feeding, an evaluative framework is presented to assist policy-makers, educators and managers to make ethical- and biologically-based decisions about the appropriateness of feeding wildlife in the context of research, wildlife management, tourism and recreation. Abstract Feeding of wildlife occurs in the context of research, wildlife management, tourism and in opportunistic ways. A review of examples shows that although feeding is often motivated by good intentions, it can lead to problems of public safety and conservation and be detrimental to the welfare of the animals. Examples from British Columbia illustrate the problems (nuisance animal activity, public safety risk) and consequences (culling, translocation) that often arise from uncontrolled feeding. Three features of wildlife feeding can be distinguished: the feasibility of control, the effects on conservation and the effects on animal welfare. An evaluative framework incorporating these three features was applied to examples of feeding from the literature. The cases of feeding for research and management purposes were generally found to be acceptable, while cases of feeding for tourism or opportunistic feeding were generally unacceptable. The framework should allow managers and policy-makers to distinguish acceptable from unacceptable forms of wildlife feeding as a basis for policy, public education and enforcement. Many harmful forms of wildlife feeding seem unlikely to change until they come to be seen as socially unacceptable. PMID:26479747

The Risk-Informed Materials Management (RIMM) Tool System for Determining Safe-Levels of Contaminated Materials Managed on the Land

EPA Science Inventory

EPA’s Risk-Informed Materials Management (RIMM) tool system is a modeling approach that helps risk assessors evaluate the safety of managing raw, reused, or waste material streams via a variety of common scenarios (e.g., application to farms, use as a component in road cons...

Statistical, epidemiological, and risk-assessment approaches to evaluating safety of vaccines throughout the life cycle at the Food and Drug Administration.

PubMed

Ball, Robert; Horne, Dale; Izurieta, Hector; Sutherland, Andrea; Walderhaug, Mark; Hsu, Henry

2011-05-01

The public health community faces increasing demands for improving vaccine safety while simultaneously increasing the number of vaccines available to prevent infectious diseases. The passage of the US Food and Drug Administration (FDA) Amendment Act of 2007 formalized the concept of life-cycle management of the risks and benefits of vaccines, from early clinical development through many years of use in large numbers of people. Harnessing scientific and technologic advances is necessary to improve vaccine-safety evaluation. The Office of Biostatistics and Epidemiology in the Center for Biologics Evaluation and Research is working to improve the FDA's ability to monitor vaccine safety by improving statistical, epidemiologic, and risk-assessment methods, gaining access to new sources of data, and exploring the use of genomics data. In this article we describe the current approaches, new resources, and future directions that the FDA is taking to improve the evaluation of vaccine safety.

Evaluating vegetation management practices for woody and herbaceous vegetation : final report.

DOT National Transportation Integrated Search

2017-03-01

To determine vegetation management practices, ODOT Districts can implement to increase efficiency : and cost-effectiveness that contribute to worker safety and foster safe highway use by the traveling : public. ODOT would benefit from a Roadside Inte...

Evaluating transportation systems management & operations (TSM&O) benefits to alternative intersection treatments : [summary].

DOT National Transportation Integrated Search

2015-12-01

The Florida Department of Transportation (FDOT) has set a goal to optimize existing : infrastructure to improve safety, capacity, and reliability while reducing congestion and delays. : FDOT is pursuing this goal through Transportation Systems Manage...

Base-Level Management of Laser Radiation Protection Program

DTIC Science & Technology

1992-02-01

safety eyewear . special considerations for medical lasers and optical fibers, and summary evaluations of common Air Force laser systems... optical density of 2. Laser safety eyewear should have the optical density clearly marked for ail wavelengths for which the eyewear provides protection. c...density of protective eyewear . The optical density required for laser safety eyewear is dependent on the irradiance or radiant exposure-of the

National Ignition Facility Construction Safety Management Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warner, B.E.

2000-02-01

An accident occurred at the NIF construction site on January 13, 2000, in which a worker sustained a serious injury when a 42-inch-diameter duct fell during installation. Following the accident, NIF Project Management chartered two review teams: (1) an Incident Analysis Team to independently assess the direct and root causes of the accident, and (2) a Management Review Team to review the roles and responsibilities of the line, support, and construction management organizations involved. This report provides a discussion of the information gathered by the Management Review Team and provides a list of observations and recommendations based on an analysismore » of the information. The Management Review Team includes senior managers who represent several Directorates within LLNL and DOE OAK: Dick Billia representing Engineering; Dave Leary representing Business Services and Public Affairs; Jim Jackson representing Hazards Control; Chuck Taylor representing DOE OAK; Arnie Clobes representing the ICF/NIF Program; and Jon Yatabe and Bruce Warner (Chairperson) representing the NIF Project. The attached letter from the NIF Project Manager, Ed Moses, to the Management Review Team contains the team's Charter. The team was asked to evaluate the effectiveness of the line management and its supporting safety functions in managing safety during NIF construction. The evaluation was to include the current conventional facility construction, which is 85% complete, and upcoming activities such as Beampath Infrastructure System installation, which will begin in the next six months and which represents a significant amount of work over the next two to three years. The remainder of this document describes the Management Review Team's review process (Section 2), its observations gathered during the review (Section 3), and its recommendations to the NIF Project Manager based on those observations (Section 4).« less

Aviation’s Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial

PubMed Central

Bennett, Simon A

2017-01-01

Background A National Health Service (NHS) contingent liability for medical error claims of over £26 billion. Objectives To evaluate the safety management and educational benefits of adapting aviation’s Normal Operations Safety Audit (NOSA) to health care. Methods In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. Results The data revealed a threat-rich environment, where errors – some consequential – were made (359 threats and 86 errors were recorded over 2 weeks). The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. Conclusion NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1) the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2) the participating NHS Trusts be encouraged to act on students’ findings; and 3) the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool. PMID:28860881

The Safety "Use Case": Co-Developing Chemical Information Management and Laboratory Safety Skills

ERIC Educational Resources Information Center

Stuart, Ralph B.; McEwen, Leah R.

2016-01-01

The 2015 edition of the American Chemical Society's "Guidelines and Evaluation Procedures for Bachelor's Degree Programs" identifies six skill sets that undergraduate chemistry programs should instill in their students. In our roles as support staff for chemistry departments at two different institutions (one a Primarily Undergraduate…

Techniques for Managing a Safe School.

ERIC Educational Resources Information Center

Johns, Beverley H.; Keenan, John P.

This book offers educators guidelines for appropriately dealing with aggression in the schools and ways to increase school safety for all students. The 13 chapters address the following topics: (1) evaluating a school for safety, which includes a checklist to use in reviewing policies, facilities, students, and staff; (2) principles of peaceful…

The effects of crew resource management on teamwork and safety climate at Veterans Health Administration facilities.

PubMed

Schwartz, Miriam E; Welsh, Deborah E; Paull, Douglas E; Knowles, Regina S; DeLeeuw, Lori D; Hemphill, Robin R; Essen, Keith E; Sculli, Gary L

2017-11-09

Communication failure is a significant source of adverse events in health care and a leading root cause of sentinel events reported to the Joint Commission. The Veterans Health Administration National Center for Patient Safety established Clinical Team Training (CTT) as a comprehensive program to enhance patient safety and to improve communication and teamwork among health care professionals. CTT is based on techniques used in aviation's Crew Resource Management (CRM) training. The aviation industry has reached a significant safety record in large part related to the culture change generated by CRM and sustained by its recurrent implementation. This article focuses on the improvement of communication, teamwork, and patient safety by utilizing a standardized, CRM-based, interprofessional, immersive training in diverse clinical areas. The Teamwork and Safety Climate Questionnaire was used to evaluate safety climate before and after CTT. The scores for all of the 27 questions on the questionnaire showed an increase from baseline to 12 months, and 11 of those increases were statistically significant. A recurrent training is recommended to maintain the positive outcomes. CTT enhances patient safety and reduces risk of patient harm by improving teamwork and facilitating clear, concise, specific and timely communication among health care professionals. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

Implementation of cold risk management in occupational safety, occupational health and quality practices. Evaluation of a development process and its effects at the finnish maritime administration.

PubMed

Risikko, Tanja; Remes, Jouko; Hassi, Juhani

2008-01-01

Cold is a typical environmental risk factor in outdoor work in northern regions. It should be taken into account in a company's occupational safety, health and quality systems. A development process for improving cold risk management at the Finnish Maritime Administration (FMA) was carried out by FMA and external experts. FMA was to implement it. Three years after the development phase, the outcomes and implementation were evaluated. The study shows increased awareness about cold work and few concrete improvements. Concrete improvements in occupational safety and health practices could be seen in the pilot group. However, organization-wide implementation was insufficient, the main reasons being no organization-wide practices, unclear process ownership, no resources and a major reorganization process. The study shows a clear need for expertise supporting implementation. The study also presents a matrix for analyzing the process.

Utilizing LIDAR data to analyze access management criteria in Utah.

DOT National Transportation Integrated Search

2017-05-01

The primary objective of this research was to increase understanding of the safety impacts across the state related to access management. This was accomplished by using the Light Detection and Ranging (LiDAR) database to evaluate driveway spacing and...

Nursing perceptions of patient safety climate in the Gaza Strip, Palestine.

PubMed

Elsous, A; Akbari Sari, A; AlJeesh, Y; Radwan, M

2017-09-01

This study was undertaken to assess the perception of nurses about patient safety culture and to test whether it is significantly affected by the nurses' position, age, experience and working hours. Patient safety has sparked the interest of healthcare mangers, yet there is limited knowledge about the current patient safety culture among nurses in the Gaza Strip. This was a descriptive cross-sectional study, administering the Arabic Safety Attitude Questionnaire (Short Form 2006) to 210 nurses in four public general hospitals. Job Satisfaction was the most highly perceived factor affecting patient safety, followed by Perception of Management. Safety culture varied across nursing position, age, work experience and working hours. Nurse Managers had more positive attitudes towards patients than frontline clinicians did. The more experience nurses had, the better their attitudes towards patient safety. Nurses who worked the minimum weekly required hours and who were 35 years and older had better attitudes towards all patient safety dimensions except for Stress Recognition. Nurses with a positive attitude had better collaboration with healthcare professionals than those without a positive attitude. Generalization is limited, as nurses who worked in private and specialized hospitals were excluded. Evaluation of the safety culture is the essential starting point to identify hindrances or drivers for safe patient care. Job Satisfaction, Perception of Management and Teamwork necessitate reinforcement, while Working Conditions, Stress Recognition and Safety Climate require improvement. Ensuring job satisfaction through adequate staffing levels, providing incentives and maintaining a collegial environment require both strategic planning and institutional policies at the higher administrative level. Creation of a non-punitive and learning environment, promoting open communication and fostering continuous education should be fundamental aspects of hospital management. A policy of mixing experienced nurses with inexperienced nurses should be considered. © 2017 International Council of Nurses.

[Safe Use of Recent New Drugs-Current Status and Challenges].

PubMed

Ohashi, Yoshiaki

2018-01-01

　In Japan and overseas, Chugai Pharmaceutical Company handles numerous biopharmaceuticals, molecular targeted therapies and other pharmaceuticals with innovative modes of action. Expert safety evaluation is essential for promoting the appropriate use of these pharmaceuticals around the world and in gaining acceptance from patients and healthcare professionals (HCPs), while speedy decision-making is crucial for the timely collection and provision of safety information and thus ensuring safety. In 2015, we collected safety information on more than 180000 cases and evaluated it from a medical standpoint. We have established a system for recording the collected information in a global database, and are conducting signal detection of adverse drug reactions using this database. With this system, we promptly disclose information to regulatory authorities in Japan, the US, Europe and Asia. We have in-house medical doctors with abundant clinical experience who conduct expert safety evaluations. Many innovative drugs, such as anticancer drugs or biopharmaceuticals, require wider-ranging, more rigorous management, including the provision of appropriate safety information to HCPs, management of distribution through wholesalers and dispensing pharmacies, and confirmation of conditions of use, in addition to all-case registration surveillance. With progress in the development of individualized medicine and drugs with new modes of action, in order for HCPs to understand the characteristics of these new drugs and use them appropriately, pharmacists and pharmaceutical companies should cooperate in promoting their appropriate use in the spirit of 'All Pharmacists for Patients'.

Evaluation of simparteam - a needs-orientated team training format for obstetrics and neonatology.

PubMed

Zech, Alexandra; Gross, Benedict; Jasper-Birzele, Céline; Jeschke, Katharina; Kieber, Thomas; Lauterberg, Jörg; Lazarovici, Marc; Prückner, Stephan; Rall, Marcus; Reddersen, Silke; Sandmeyer, Benedikt; Scholz, Christoph; Stricker, Eric; Urban, Bert; Zobel, Astrid; Singer, Ingeborg

2017-04-01

A standardized team-training program for healthcare professionals in obstetric units was developed based on an analysis of common causes for adverse events found in claims registries. The interdisciplinary and inter-professional training concept included both technical and non-technical skill training. Evaluation of the program was carried out in hospitals with respect to the immediate personal learning of participants and also regarding changes in safety culture. Trainings in n=7 hospitals including n=270 participants was evaluated using questionnaires. These were administered at four points in time to staff from participating obstetric units: (1) 10 days ahead of the training (n=308), (2) on training day before (n=239), (3) right after training (n=248), and (4) 6 months after (n=188) the intervention. Questionnaires included several questions for technical and non-technical skills and the Hospital Survey on Patient Safety (HSOPS). Strong effects were found in the participants' perception of their own competence regarding technical skills and handling of emergencies. Small effects could be observed in the scales of the HSOPS questionnaire. Most effects differed depending on professional groups and hospitals. Integrated technical and team management training can raise employees' confidence with complex emergency management skills and processes. Some indications for improvements on the patient safety culture level were detected. Furthermore, differences between professional groups and hospitals were found, indicating the need for more research on contributing factors for patient safety and for the success of crew resource management (CRM) trainings.

Medical-device risk management and public safety: using cost-benefit as a measurement of effectiveness

NASA Astrophysics Data System (ADS)

Hughes, Allen A.

1994-12-01

Public safety can be enhanced through the development of a comprehensive medical device risk management. This can be accomplished through case studies using a framework that incorporates cost-benefit analysis in the evaluation of risk management attributes. This paper presents a framework for evaluating the risk management system for regulatory Class III medical devices. The framework consists of the following sixteen attributes of a comprehensive medical device risk management system: fault/failure analysis, premarket testing/clinical trials, post-approval studies, manufacturer sponsored hospital studies, product labeling, establishment inspections, problem reporting program, mandatory hospital reporting, medical literature surveillance, device/patient registries, device performance monitoring, returned product analysis, autopsy program, emergency treatment funds/interim compensation, product liability, and alternative compensation mechanisms. Review of performance histories for several medical devices can reveal the value of information for many attributes, and also the inter-dependencies of the attributes in generating risk information flow. Such an information flow network is presented as a starting point for enhancing medical device risk management by focusing on attributes with high net benefit values and potential to spur information dissemination.

Safety and Mission Assurance Knowledge Management Retention: Managing Knowledge for Successful Mission Operations

NASA Technical Reports Server (NTRS)

Johnson, Teresa A.

2006-01-01

Knowledge Management is a proactive pursuit for the future success of any large organization faced with the imminent possibility that their senior managers/engineers with gained experiences and lessons learned plan to retire in the near term. Safety and Mission Assurance (S&MA) is proactively pursuing unique mechanism to ensure knowledge learned is retained and lessons learned captured and documented. Knowledge Capture Event/Activities/Management helps to provide a gateway between future retirees and our next generation of managers/engineers. S&MA hosted two Knowledge Capture Events during 2005 featuring three of its retiring fellows (Axel Larsen, Dave Whittle and Gary Johnson). The first Knowledge Capture Event February 24, 2005 focused on two Safety and Mission Assurance Safety Panels (Space Shuttle System Safety Review Panel (SSRP); Payload Safety Review Panel (PSRP) and the latter event December 15, 2005 featured lessons learned during Apollo, Skylab, and Space Shuttle which could be applicable in the newly created Crew Exploration Vehicle (CEV)/Constellation development program. Gemini, Apollo, Skylab and the Space Shuttle promised and delivered exciting human advances in space and benefits of space in people s everyday lives on earth. Johnson Space Center's Safety & Mission Assurance team work over the last 20 years has been mostly focused on operations we are now beginning the Exploration development program. S&MA will promote an atmosphere of knowledge sharing in its formal and informal cultures and work processes, and reward the open dissemination and sharing of information; we are asking "Why embrace relearning the "lessons learned" in the past?" On the Exploration program the focus will be on Design, Development, Test, & Evaluation (DDT&E); therefore, it is critical to understand the lessons from these past programs during the DDT&E phase.

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

PubMed

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Camp

Over the past four years, the Electrical Safety Program at PPPL has evolved in addressing changing regulatory requirements and lessons learned from accident events, particularly in regards to arc flash hazards and implementing NFPA 70E requirements. This presentation will discuss PPPL's approaches to the areas of electrical hazards evaluation, both shock and arc flash; engineered solutions for hazards mitigation such as remote racking of medium voltage breakers, operational changes for hazards avoidance, targeted personnel training and hazard appropriate personal protective equipment. Practical solutions for nominal voltage identification and zero voltage checks for lockout/tagout will also be covered. Finally, we willmore » review the value of a comprehensive electrical drawing program, employee attitudes expressed as a personal safety work ethic, integrated safety management, and sustained management support for continuous safety improvement.« less

Healthy Choices for Every Body Adult Curriculum Improves Participants' Food Resource Management Skills and Food Safety Practices.

PubMed

Adedokun, Omolola A; Plonski, Paula; Jenkins-Howard, Brooke; Cotterill, Debra B; Vail, Ann

2018-06-01

To evaluate the impact of the University of Kentucky's Healthy Choices for Every Body (HCEB) adult nutrition education curriculum on participants' food resource management (FRM) skills and food safety practices. A quasi-experimental design was employed using propensity score matching to pair 8 intervention counties with 8 comparison counties. Independent-samples t tests and ANCOVA models compared gains in FRM skills and food safety practices between the intervention and comparison groups (n = 413 and 113, respectively). Propensity score matching analysis showed a statistical balance and similarities between the comparison and intervention groups. Food resource management and food safety gain scores were statistically significantly higher for the intervention group (P < .001), with large effect sizes (d = 0.9) for both variables. The group differences persisted even after controlling for race and age in the ANCOVA models. The HCEB curriculum was effective in improving the FRM skills and food safety practices of participants. Copyright © 2018 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Changing patient safety culture in China: a case study of an experimental Chinese hospital from a comparative perspective.

PubMed

Xu, Xiao Ping; Deng, Dong Ning; Gu, Yong Hong; Ng, Chui Shan; Cai, Xiao; Xu, Jun; Zhang, Xin Shi; Ke, Dong Ge; Yu, Qian Hui; Chan, Chi Kuen

2018-01-01

The World Health Organization highlights that patient safety interventions are not lacking but that the local context affects their successful implementation. Increasing attention is being paid to patient safety in Mainland China, yet few studies focus on patient safety in organizations with mixed cultures. This paper evaluates the current patient safety culture in an experimental Chinese hospital with a Hong Kong hospital management culture, and it aims to explore the application of Hong Kong's patient safety strategies in the context of Mainland China. A quantitative survey of 307 hospital staff members was conducted using the Hospital Survey on Patient Safety Culture questionnaire. The findings were compared with a similar study on general Chinese hospitals and were appraised with reference to the Manchester Patient Safety Framework. Lower scores were observed among participants with the following characteristics: males, doctors, those with more work experience, those with higher education, and those from the general practice and otolaryngology departments. However, the case study hospital achieved better scores in management expectations, actions and support for patient safety, incident reporting and communication, and teamwork within units. Its weaknesses were related to non-punitive responses to errors, teamwork across units, and staffing. The case study hospital contributes to a changing patient safety culture in Mainland China, yet its patient safety culture remains mostly bureaucratic. Further efforts could be made to deepen the staff's patient safety culture mind-set, to realize a "bottom-up" approach to cultural change, to build up a comprehensive and integrated incident management system, and to improve team building and staffing for patient safety.

The art of appropriate evaluation : a guide for highway safety program managers

DOT National Transportation Integrated Search

1999-05-01

This Guide provides an overview of the steps that are involved in program evaluations and gets you thinking about how these steps fit into your implementation plans. It also provides some handy suggestions on how to find and work with an evaluation c...

A Model Train-The-Trainer Program for HACCP-Based Food Safety Training in the Retail/Food Service Industry: An Evaluation.

ERIC Educational Resources Information Center

Martin, Kenneth E.; Knabel, Steve; Mendenhall, Von

1999-01-01

A survey showed states are adopting higher training and certification requirements for food-service workers. A train-the-trainer model was developed to prepare extension agents, health officers, and food-service managers to train others in food-safety procedures. (SK)

Spinal cord stimulation: a review of the safety literature and proposal for perioperative evaluation and management.

PubMed

Walsh, Kevin M; Machado, Andre G; Krishnaney, Ajit A

2015-08-01

There is currently no consensus on appropriate perioperative management of patients with spinal cord stimulator implants. Magnetic resonance imaging (MRI) is considered safe under strict labeling conditions. Electrocautery is generally not recommended in these patients but sometimes used despite known risks. The aim was to discuss the perioperative evaluation and management of patients with spinal cord stimulator implants. A literature review, summary of device labeling, and editorial were performed, regarding the safety of spinal cord stimulator devices in the perioperative setting. A literature review was performed, and the labeling of each Food and Drug Administration (FDA)-approved spinal cord stimulation system was reviewed. The literature review was performed using PubMed and the FDA website (www.fda.gov). Magnetic resonance imaging safety recommendations vary between the models. Certain systems allow for MRI of the brain to be performed, and only one system allows for MRI of the body to be performed, both under strict labeling conditions. Before an MRI is performed, it is imperative to ascertain that the system is intact, without any lead breaks or low impedances, as these can result in heating of the spinal cord stimulation (SCS) and injury to the patient. Monopolar electrocautery is generally not recommended for patients with SCS; however, in some circumstances, it is used when deemed required by the surgeon. When cautery is necessary, bipolar electrocautery is recommended. Modern electrocautery units are to be used with caution as there remains a risk of thermal injury to the tissue in contact with the SCS. As with MRI, electrocautery usage in patients with SCS systems with suspected breaks or abnormal impedances is unsafe and may cause injury to the patient. Spinal cord stimulation is increasingly used in patients with pain of spinal origin, particularly to manage postlaminectomy syndrome. Knowledge of the safety concerns of SCS and appropriate perioperative evaluation and management of the SCS system can reduce risks and improve surgical planning. Copyright © 2015 Elsevier Inc. All rights reserved.

Formal Foundations for Hierarchical Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh; Whiteside, Iain

2015-01-01

Safety cases are increasingly being required in many safety-critical domains to assure, using structured argumentation and evidence, that a system is acceptably safe. However, comprehensive system-wide safety arguments present appreciable challenges to develop, understand, evaluate, and manage, partly due to the volume of information that they aggregate, such as the results of hazard analysis, requirements analysis, testing, formal verification, and other engineering activities. Previously, we have proposed hierarchical safety cases, hicases, to aid the comprehension of safety case argument structures. In this paper, we build on a formal notion of safety case to formalise the use of hierarchy as a structuring technique, and show that hicases satisfy several desirable properties. Our aim is to provide a formal, theoretical foundation for safety cases. In particular, we believe that tools for high assurance systems should be granted similar assurance to the systems to which they are applied. To this end, we formally specify and prove the correctness of key operations for constructing and managing hicases, which gives the specification for implementing hicases in AdvoCATE, our toolset for safety case automation. We motivate and explain the theory with the help of a simple running example, extracted from a real safety case and developed using AdvoCATE.

Real-Time Safety Risk Assessment Based on a Real-Time Location System for Hydropower Construction Sites

PubMed Central

Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns. PMID:25114958

Real-time safety risk assessment based on a real-time location system for hydropower construction sites.

PubMed

Jiang, Hanchen; Lin, Peng; Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns.

75 FR 54804 - Safety and Health Management Programs for Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... regulations, and include participation of everyone from the Chief Executive Officer (CEO) to workers and... involvement of workers from the development of the program through implementation to evaluation. Requests to... Standards Organization's (ISO's) ISO 9001:2008 (E), Quality management systems--Requirements; and The...

Microbiological performance of a food safety management system in a food service operation.

PubMed

Lahou, E; Jacxsens, L; Daelman, J; Van Landeghem, F; Uyttendaele, M

2012-04-01

The microbiological performance of a food safety management system in a food service operation was measured using a microbiological assessment scheme as a vertical sampling plan throughout the production process, from raw materials to final product. The assessment scheme can give insight into the microbiological contamination and the variability of a production process and pinpoint bottlenecks in the food safety management system. Three production processes were evaluated: a high-risk sandwich production process (involving raw meat preparation), a medium-risk hot meal production process (starting from undercooked raw materials), and a low-risk hot meal production process (reheating in a bag). Microbial quality parameters, hygiene indicators, and relevant pathogens (Listeria monocytogenes, Salmonella, Bacillus cereus, and Escherichia coli O157) were in accordance with legal criteria and/or microbiological guidelines, suggesting that the food safety management system was effective. High levels of total aerobic bacteria (>3.9 log CFU/50 cm(2)) were noted occasionally on gloves of food handlers and on food contact surfaces, especially in high contamination areas (e.g., during handling of raw material, preparation room). Core control activities such as hand hygiene of personnel and cleaning and disinfection (especially in highly contaminated areas) were considered points of attention. The present sampling plan was used to produce an overall microbiological profile (snapshot) to validate the food safety management system in place.

Integrated optimisation technique based on computer-aided capacity and safety evaluation for managing downstream lane-drop merging area of signalised junctions

NASA Astrophysics Data System (ADS)

Chen, CHAI; Yiik Diew, WONG

2017-02-01

This study provides an integrated strategy, encompassing microscopic simulation, safety assessment, and multi-attribute decision-making, to optimize traffic performance at downstream merging area of signalized intersections. A Fuzzy Cellular Automata (FCA) model is developed to replicate microscopic movement and merging behavior. Based on simulation experiment, the proposed FCA approach is able to provide capacity and safety evaluation of different traffic scenarios. The results are then evaluated through data envelopment analysis (DEA) and analytic hierarchy process (AHP). Optimized geometric layout and control strategies are then suggested for various traffic conditions. An optimal lane-drop distance that is dependent on traffic volume and speed limit can thus be established at the downstream merging area.

[Analysis of the safety culture in a Cardiology Unit managed by processes].

PubMed

Raso-Raso, Rafael; Uris-Selles, Joaquín; Nolasco-Bonmatí, Andreu; Grau-Jornet, Guillermo; Revert-Gandia, Rosa; Jiménez-Carreño, Rebeca; Sánchez-Soriano, Ruth M; Chamorro-Fernández, Carlos I; Marco-Francés, Elvira; Albero-Martínez, José V

2017-04-04

Safety culture is one of the requirements for preventing the occurrence of adverse effects. However, this has not been studied in the field of cardiology. The aim of this study is to evaluate the safety culture in a cardiology unit that has implemented and certified an integrated quality and risk management system for patient safety. A cross-sectional observational study was conducted in 2 consecutive years, with all staff completing the Spanish version of the questionnaire, "Hospital Survey on Patient Safety Culture" of the "Agency for Healthcare Research and Quality", with 42 items grouped into 12 dimensions. The percentage of positive responses in each dimension in 2014 and 2015 were compared, as well as national data and United States data, following the established rules. The overall assessment out of a possible 5, was 4.5 in 2014 and 4.7 in 2015. Seven dimensions were identified as strengths. The worst rated were: staffing, management support and teamwork between units. The comparison showed superiority in all dimensions compared to national data, and in 8 of them compared to American data. The safety culture in a Cardiology Unit with an integrated quality and risk management patient safety system is high, and higher than nationally in all its dimensions and in most of them compared to the United States. Copyright © 2017 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Regulatory Science in Professional Education.

PubMed

Akiyama, Hiroshi

2017-01-01

In the field of pharmaceutical sciences, the subject of regulatory science (RS) includes pharmaceuticals, food, and living environments. For pharmaceuticals, considering the balance between efficacy and safety is a point required for public acceptance, and in that balance, more importance is given to efficacy in curing disease. For food, however, safety is the most important consideration for public acceptance because food should be essentially free of risk. To ensure food safety, first, any hazard that is an agent in food or condition of food with the potential to cause adverse health effects should be identified and characterized. Then the risk that it will affect public health is scientifically analyzed. This process is called risk assessment. Second, risk management should be conducted to reduce a risk that has the potential to affect public health found in a risk assessment. Furthermore, risk communication, which is the interactive exchange of information and opinions concerning risk and risk management among risk assessors, risk managers, consumers, and other interested parties, should be conducted. Food safety is ensured based on risk analysis consisting of the three components of risk assessment, risk management, and risk communication. RS in the field of food safety supports risk analysis, such as scientific research and development of test methods to evaluate food quality, efficacy, and safety. RS is also applied in the field of living environments because the safety of environmental chemical substances is ensured based on risk analysis, similar to that conducted for food.

Safety culture assessment in petrochemical industry: a comparative study of two algerian plants.

PubMed

Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai

2014-06-01

To elucidate the relationship between safety culture maturity and safety performance of a particular company. To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.

Safety Culture Assessment in Petrochemical Industry: A Comparative Study of Two Algerian Plants

PubMed Central

Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai

2014-01-01

Background To elucidate the relationship between safety culture maturity and safety performance of a particular company. Methods To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. Results The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. Conclusion The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance. PMID:25180135

Characteristics of effective health and safety committees: survey results.

PubMed

Morse, Tim; Bracker, Anne; Warren, Nicholas; Goyzueta, Jeanette; Cook, Matthew

2013-02-01

Although perhaps the most common worker-management structure, there has been surprisingly little research on describing and evaluating the characteristics of health and safety committees. A survey of 380 health and safety committee members from 176 manufacturing workplaces was supplemented with administrative data and compared with reported workers' compensation rates. Survey respondents also reported perceptions of overall safety, committee, effectiveness, committee activities, and "best practices." Extensive descriptive data is presented, including a mean of 8.7 members per committee spending 1,167 hr per year on committee business for an estimate of $40,500 worth of time per committee. Higher speed to correct action items, a focus on ergonomics, and planning for safety training was associated with lower injury rates. The discrepancy between managers and hourly committee members in estimating overall safety was strongly positively associated with injury rates. Communications and worker involvement may be important to address discrepancy issues. Prospective studies are needed to distinguish directionality of associations. Copyright © 2012 Wiley Periodicals, Inc.

Safe use of vaccines and vaccine compliance with food safety requirements.

PubMed

Grein, K; Papadopoulos, O; Tollis, M

2007-08-01

Advanced technologies and regulatory regimes have contributed to the availability of veterinary vaccines that have high quality and favourable safety profiles in terms of potential risks posed to the target animals, the persons who come into contact with the vaccine, the consumers of food derived from vaccinated animals and the environment. The authorisation process requires that a range of safety studies are provided to evaluate the products. The design and production of vaccines, and their safe use, are primarily assessed by using data gathered from extensive pre-marketing studies performed on target animals and specific quality tests. The current post-marketing safeguards include good manufacturing practices, batch safety testing, inspections and pharmacovigilance. In addition to hazard identification, a full benefit/risk evaluation needs to be undertaken. The outcome of that evaluation will determine options for risk management and affect regulatory decisions on the safety of the vaccine; options might, for example, include special warnings on package inserts and labels.

Twin Cities ramp meter evaluation : evaluation plan

DOT National Transportation Integrated Search

2000-09-25

The Minnesota Department of Transportation (Mn/DOT) uses ramp meters to manage freeway access on approximately 210 miles of freeways in the Twin Cities metropolitan area. Mn/DOT first tested ramp meters in 1969 as a method to optimize freeway safety ...

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

PubMed

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Influence of organizational factors on safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haber, S.B.; Metlay, D.S.; Crouch, D.A.

There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification ofmore » key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab.« less

A study of patient safety management in the framework of clinical governance according to the nurses working in the ICU of the hospitals in the East of Tehran.

PubMed

Sahebalzamani, Mohammad; Mohammady, Mohsen

2014-05-01

The improvement of patient safety conditions in the framework of clinical service governance is one of the most important concerns worldwide. The importance of this issue and its effects on the health of patients encouraged the researcher to conduct this study to evaluate patient safety management in the framework of clinical governance according to the nurses working in the intensive care units (ICUs) of the hospitals of the east of Tehran, Iran in 2012. This descriptive study, which was based on census method, was conducted on 250 nurses sampled from the hospitals located in the east of Tehran. For the collection of data, a researcher-made questionnaire in five categories, including culture, leadership, training, environment, and technology, as well as on safety items was used. To test the validity of the questionnaire, content validity test was conducted, and the reliability of the questionnaire was assessed by retest method, in which the value of alpha was equal to 91%. The results showed that safety culture was at a high level in 55% of cases, safety leadership was at a high level in 40% cases and at a low level in 2.04% cases, safety training was at a high level in 64.8% cases and at a low level in 4% cases, safety of environment and technology was at a high level in 56.8% cases and at a low level in 1.6% cases, and safety items of the patients in their reports were at a high level in approximately 44% cases and at a low level in 6.5% cases. The results of Student's t-test (P < 0.001) showed that the average score of all safety categories of the patients was significantly higher than the average points. Diligence of the management and personnel of the hospital is necessary for the improvement of safety management. For this purpose, the management of hospitals can show interest in safety, develop an events reporting system, enhance teamwork, and implement clinical governance plans.

Real Time Maintenance Approval and Required IMMT Coordination

NASA Technical Reports Server (NTRS)

Burchell, S.

2016-01-01

Payloads are assessed for nominal operations. Payload Developers have the option of performing a maintenance hazard assessment (MHA) for potential maintenance activities. When POIC (Payload Operations and Integration Center) Safety reviews an OCR calling for a maintenance procedure, we cannot approve it without a MHA. If no MHA exists, we contact MER (Mission Evaluation Room) Safety. Depending on the nature of the problem, MER Safety has the option to: Analyze and grant approval themselves; Direct the payload back to the ISRP (Integrated Safety Review Panel); Direct the payload to the IMMT (Increment Mission Management Team).

Roadmap to risk evaluation and mitigation strategies (REMS) success

PubMed Central

Balian, John D.; Malhotra, Rachpal; Perentesis, Valerie

2010-01-01

Medical safety-related risk management is a rapidly evolving and increasingly important aspect of drug approval and market longevity. To effectively meet the challenges of this new era, we describe a risk management roadmap that proactively yet practically anticipates risk-management requirements, provides the foundation for enduring yet appropriately flexible risk-management practices, and leverages these techniques to efficiently and effectively utilize risk evaluation and mitigation strategies (REMS)/risk minimization programs as market access enablers. This fully integrated risk-management paradigm creates exciting opportunities for newer tools, techniques, and approaches to more successfully optimize product development, approval, and commercialization, with patients as the ultimate beneficiaries. PMID:25083193

Design and evaluation of simulation scenarios for a program introducing patient safety, teamwork, safety leadership, and simulation to healthcare leaders and managers.

PubMed

Cooper, Jeffrey B; Singer, Sara J; Hayes, Jennifer; Sales, Michael; Vogt, Jay W; Raemer, Daniel; Meyer, Gregg S

2011-08-01

We developed a training program to introduce managers and informal leaders of healthcare organizations to key concepts of teamwork, safety leadership, and simulation to motivate them to act as leaders to improve safety within their sphere of influence. This report describes the simulation scenario and debriefing that are core elements of that program. Twelve teams of clinician and nonclinician managers were selected from a larger set of volunteers to participate in a 1-day, multielement training program. Two simulation exercises were developed: one for teams of nonclinicians and the other for clinicians or mixed groups. The scenarios represented two different clinical situations, each designed to engage participants in discussions of their safety leadership and teamwork issues immediately after the experience. In the scenarios for nonclinicians, participants conducted an anesthetic induction and then managed an ethical situation. The scenario for clinicians simulated a consulting visit to an emergency room that evolved into a problem-solving challenge. Participants in this scenario had a limited time to prepare advice for hospital leadership on how to improve observed safety and cultural deficiencies. Debriefings after both types of scenarios were conducted using principles of "debriefing with good judgment." We assessed the relevance and impact of the program by analyzing participant reactions to the simulation through transcript data and facilitator observations as well as a postcourse questionnaire. The teams generally reported positive perceptions of the relevance and quality of the simulation with varying types and degrees of impact on their leadership and teamwork behaviors. These kinds of clinical simulation exercises can be used to teach healthcare leaders and managers safety leadership and teamwork skills and behaviors.

Systems-based accident analysis in the led outdoor activity domain: application and evaluation of a risk management framework.

PubMed

Salmon, P; Williamson, A; Lenné, M; Mitsopoulos-Rubens, E; Rudin-Brown, C M

2010-08-01

Safety-compromising accidents occur regularly in the led outdoor activity domain. Formal accident analysis is an accepted means of understanding such events and improving safety. Despite this, there remains no universally accepted framework for collecting and analysing accident data in the led outdoor activity domain. This article presents an application of Rasmussen's risk management framework to the analysis of the Lyme Bay sea canoeing incident. This involved the development of an Accimap, the outputs of which were used to evaluate seven predictions made by the framework. The Accimap output was also compared to an analysis using an existing model from the led outdoor activity domain. In conclusion, the Accimap output was found to be more comprehensive and supported all seven of the risk management framework's predictions, suggesting that it shows promise as a theoretically underpinned approach for analysing, and learning from, accidents in the led outdoor activity domain. STATEMENT OF RELEVANCE: Accidents represent a significant problem within the led outdoor activity domain. This article presents an evaluation of a risk management framework that can be used to understand such accidents and to inform the development of accident countermeasures and mitigation strategies for the led outdoor activity domain.

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland

PubMed Central

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain. PMID:27341034

Evaluating the Safety Profile of Non-Active Implantable Medical Devices Compared with Medicines.

PubMed

Pane, Josep; Coloma, Preciosa M; Verhamme, Katia M C; Sturkenboom, Miriam C J M; Rebollo, Irene

2017-01-01

Recent safety issues involving non-active implantable medical devices (NAIMDs) have highlighted the need for better pre-market and post-market evaluation. Some stakeholders have argued that certain features of medicine safety evaluation should also be applied to medical devices. Our objectives were to compare the current processes and methodologies for the assessment of NAIMD safety profiles with those for medicines, identify potential gaps, and make recommendations for the adoption of new methodologies for the ongoing benefit-risk monitoring of these devices throughout their entire life cycle. A literature review served to examine the current tools for the safety evaluation of NAIMDs and those for medicines. We searched MEDLINE using these two categories. We supplemented this search with Google searches using the same key terms used in the MEDLINE search. Using a comparative approach, we summarized the new product design, development cycle (preclinical and clinical phases), and post-market phases for NAIMDs and drugs. We also evaluated and compared the respective processes to integrate and assess safety data during the life cycle of the products, including signal detection, signal management, and subsequent potential regulatory actions. The search identified a gap in NAIMD safety signal generation: no global program exists that collects and analyzes adverse events and product quality issues. Data sources in real-world settings, such as electronic health records, need to be effectively identified and explored as additional sources of safety information, particularly in some areas such as the EU and USA where there are plans to implement the unique device identifier (UDI). The UDI and other initiatives will enable more robust follow-up and assessment of long-term patient outcomes. The safety evaluation system for NAIMDs differs in many ways from those for drugs, but both systems face analogous challenges with respect to monitoring real-world usage. Certain features of the drug safety evaluation process could, if adopted and adapted for NAIMDs, lead to better and more systematic evaluations of the latter.

Changing patient safety culture in China: a case study of an experimental Chinese hospital from a comparative perspective

PubMed Central

Gu, Yong Hong; Ng, Chui Shan; Cai, Xiao; Xu, Jun; Zhang, Xin Shi; Ke, Dong Ge; Yu, Qian Hui; Chan, Chi Kuen

2018-01-01

Background The World Health Organization highlights that patient safety interventions are not lacking but that the local context affects their successful implementation. Increasing attention is being paid to patient safety in Mainland China, yet few studies focus on patient safety in organizations with mixed cultures. This paper evaluates the current patient safety culture in an experimental Chinese hospital with a Hong Kong hospital management culture, and it aims to explore the application of Hong Kong’s patient safety strategies in the context of Mainland China. Methods A quantitative survey of 307 hospital staff members was conducted using the Hospital Survey on Patient Safety Culture questionnaire. The findings were compared with a similar study on general Chinese hospitals and were appraised with reference to the Manchester Patient Safety Framework. Results Lower scores were observed among participants with the following characteristics: males, doctors, those with more work experience, those with higher education, and those from the general practice and otolaryngology departments. However, the case study hospital achieved better scores in management expectations, actions and support for patient safety, incident reporting and communication, and teamwork within units. Its weaknesses were related to non-punitive responses to errors, teamwork across units, and staffing. Conclusions The case study hospital contributes to a changing patient safety culture in Mainland China, yet its patient safety culture remains mostly bureaucratic. Further efforts could be made to deepen the staff’s patient safety culture mind-set, to realize a “bottom-up” approach to cultural change, to build up a comprehensive and integrated incident management system, and to improve team building and staffing for patient safety. PMID:29750061

Tranzit XPress : hazardous material fleet management and monitoring system : evaluation report

DOT National Transportation Integrated Search

1997-07-01

In this report the evaluation performed on the first phase of the Tranzit XPress system is presented. The system comprises of a traffic/safety control center, motor vehicle instrumentation, and a variety of off vehicle tools that communicate with eac...

Preliminary safety concept for disposal of the very low level radioactive waste in Romania.

PubMed

Niculae, O; Andrei, V; Ionita, G; Duliu, O G

2009-05-01

In Romania, there are certain nuclear installations in operation or under decommissioning, all of them representing an important source of very low level waste (VLLW). This paper presents an overview on the approach of the VLLW management in Romania, focused on those resulted from the nuclear power plants decommissioning. At the same time, the basic elements of safety concept, together with some safety evaluations concerning VLLW repository are presented and discussed too.

Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects.

PubMed

Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat

2013-09-01

The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Bayesian-network-based safety risk assessment for steel construction projects.

PubMed

Leu, Sou-Sen; Chang, Ching-Miao

2013-05-01

There are four primary accident types at steel building construction (SC) projects: falls (tumbles), object falls, object collapse, and electrocution. Several systematic safety risk assessment approaches, such as fault tree analysis (FTA) and failure mode and effect criticality analysis (FMECA), have been used to evaluate safety risks at SC projects. However, these traditional methods ineffectively address dependencies among safety factors at various levels that fail to provide early warnings to prevent occupational accidents. To overcome the limitations of traditional approaches, this study addresses the development of a safety risk-assessment model for SC projects by establishing the Bayesian networks (BN) based on fault tree (FT) transformation. The BN-based safety risk-assessment model was validated against the safety inspection records of six SC building projects and nine projects in which site accidents occurred. The ranks of posterior probabilities from the BN model were highly consistent with the accidents that occurred at each project site. The model accurately provides site safety-management abilities by calculating the probabilities of safety risks and further analyzing the causes of accidents based on their relationships in BNs. In practice, based on the analysis of accident risks and significant safety factors, proper preventive safety management strategies can be established to reduce the occurrence of accidents on SC sites. Copyright © 2013 Elsevier Ltd. All rights reserved.

Applicability of the Common Safety Method for Risk Evaluation and Assessment (CSM-RA) to the Space Domain

NASA Astrophysics Data System (ADS)

Moreira, Francisco; Silva, Nuno

2016-08-01

Safety systems require accident avoidance. This is covered by application standards, processes, techniques and tools that support the identification, analysis, elimination or reduction to an acceptable level of system risks and hazards. Ideally, a safety system should be free of hazards. However, both industry and academia have been struggling to ensure appropriate risk and hazard analysis, especially in what concerns completeness of the hazards, formalization, and timely analysis in order to influence the specifications and the implementation. Such analysis is also important when considering a change to an existing system. The Common Safety Method for Risk Evaluation and Assessment (CSM- RA) is a mandatory procedure whenever any significant change is proposed to the railway system in a European Member State. This paper provides insights on the fundamentals of CSM-RA based and complemented with Hazard Analysis. When and how to apply them, and the relation and similarities of these processes with industry standards and the system life cycles is highlighted. Finally, the paper shows how CSM-RA can be the basis of a change management process, guiding the identification and management of the hazards helping ensuring the similar safety level as the initial system. This paper will show how the CSM-RA principles can be used in other domains particularly for space system evolution.

Systematic strategies for the third industrial accident prevention plan in Korea.

PubMed

Kang, Young-sig; Yang, Sung-hwan; Kim, Tae-gu; Kim, Day-sung

2012-01-01

To minimize industrial accidents, it's critical to evaluate a firm's priorities for prevention factors and strategies since such evaluation provides decisive information for preventing industrial accidents and maintaining safety management. Therefore, this paper proposes the evaluation of priorities through statistical testing of prevention factors with a cause analysis in a cause and effect model. A priority matrix criterion is proposed to apply the ranking and for the objectivity of questionnaire results. This paper used regression method (RA), exponential smoothing method (ESM), double exponential smoothing method (DESM), autoregressive integrated moving average (ARIMA) model and proposed analytical function method (PAFM) to analyze trends of accident data that will lead to an accurate prediction. This paper standardized the questionnaire results of workers and managers in manufacturing and construction companies with less than 300 employees, located in the central Korean metropolitan areas where fatal accidents have occurred. Finally, a strategy was provided to construct safety management for the third industrial accident prevention plan and a forecasting method for occupational accident rates and fatality rates for occupational accidents per 10,000 people.

Measuring safety climate in elderly homes.

PubMed

Yeung, Koon-Chuen; Chan, Charles C

2012-02-01

Provision of a valid and reliable safety climate dimension brings enormous benefits to the elderly home sector. The aim of the present study was to make use of the safety climate instrument developed by OSHC to measure the safety perceptions of employees in elderly homes such that the factor structure of the safety climate dimensions of elderly homes could be explored. In 2010, surveys by mustering on site method were administered in 27 elderly homes that had participated in the "Hong Kong Safe and Healthy Residential Care Home Accreditation Scheme" organized by the Occupational Safety and Health Council. Six hundred and fifty-one surveys were returned with a response rate of 54.3%. To examine the factor structure of safety climate dimensions in our study, an exploratory factor analysis (EFA) using principal components analysis method was conducted to identify the underlying factors. The results of the modified seven-factor's safety climate structure extracted from 35 items better reflected the safety climate dimensions of elderly homes. The Cronbach alpha range for this study (0.655 to 0.851) indicated good internal consistency among the seven-factor structure. Responses from managerial level, supervisory and professional level, and front-line staff were analyzed to come up with the suggestion on effective ways of improving the safety culture of elderly homes. The overall results showed that managers generally gave positive responses in the factors evaluated, such as "management commitment and concern to safety," "perception of work risks and some contributory influences," "safety communication and awareness," and "safe working attitude and participation." Supervisors / professionals, and frontline level staff on the other hand, have less positive responses. The result of the lowest score in the factors - "perception of safety rules and procedures" underlined the importance of the relevance and practicability of safety rules and procedures. The modified OSHC safety climate tool provided better evidence of structural validity and reliability for use by elderly homes' decision makers as an indicator of employee perception of safety in their institution. The findings and suggestions in the study provide useful information for the management, supervisors/professionals and frontline level staff to cultivate the safety culture in the elderly home sector. Most important, elderly homes can use the modified safety climate scale to identify problem areas in their safety culture and safety management practices and then target these for intervention. Copyright © 2012 Elsevier Ltd. All rights reserved.

International comparative analyses of healthcare risk management.

PubMed

Sun, Niuyun; Wang, Li; Zhou, Jun; Yuan, Qiang; Zhang, Zongjiu; Li, Youping; Liang, Minghui; Cheng, Lan; Gao, Guangming; Cui, Xiaohui

2011-02-01

Interpretation of the growing body of global literature on health care risk is compromised by a lack of common understanding and language. This series of articles aims to comprehensively compare laws and regulations, institutional management, and administration of incidence reporting systems on medical risk management in the United Kingdom, the United States, Canada, Australia, and Taiwan, so as to provide evidence and recommendations for health care risk management policy in China. We searched the official websites of the healthcare risk management agencies of the four countries and one district for laws, regulatory documents, research reports, reviews and evaluation forms concerned with healthcare risk management and assessment. Descriptive comparative analysis was performed on relevant documents. A total of 146 documents were included in this study, including 2 laws (1.4%), 17 policy documents (11.6%), 41 guidance documents (28.1%), 37 reviews (25.3%), and 49 documents giving general information (33.6%). The United States government implemented one law and one rule of patient safety management, while the United Kingdom and Australia each issued professional guidances on patient safety improvement. The four countries implemented patient safety management policy on four different levels: national, state/province, hospital, and non-governmental organization. The four countries and one district adopted four levels of patient safety management, and the administration modes can be divided into an "NGO-led mode" represented by the United States and Canada and a "government-led mode" represented by the United Kingdom, Australia, and Taiwan. © 2011 Blackwell Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

User-Centered Collaborative Design and Development of an Inpatient Safety Dashboard.

PubMed

Mlaver, Eli; Schnipper, Jeffrey L; Boxer, Robert B; Breuer, Dominic J; Gershanik, Esteban F; Dykes, Patricia C; Massaro, Anthony F; Benneyan, James; Bates, David W; Lehmann, Lisa S

2017-12-01

Patient safety remains a key concern in hospital care. This article summarizes the iterative participatory development, features, functions, and preliminary evaluation of a patient safety dashboard for interdisciplinary rounding teams on inpatient medical services. This electronic health record (EHR)-embedded dashboard collects real-time data covering 13 safety domains through web services and applies logic to generate stratified alerts with an interactive check-box function. The technological infrastructure is adaptable to other EHR environments. Surveyed users perceived the tool as highly usable and useful. Integration of the dashboard into clinical care is intended to promote communication about patient safety and facilitate identification and management of safety concerns. Copyright © 2017 The Joint Commission. All rights reserved.

Analysis of the safety evaluation for premarketing clinical trials of hemodialyzer and of postmarketing safety reports of hemodialyzer in Japan and the US: insights into the construction of a sophisticated premarketing evaluation.

PubMed

Saito, Masami; Iwasaki, Kiyotaka

2017-03-01

Our aim was to conduct a scoping review of the regulations for hemodialyzers in the safety evaluation in Japan and the United States, and to evaluate the criteria for premarketing clinical trials and postmarketing safety reports to inform the development of a sophisticated premarketing evaluation in Japan. Regulations for approval of hemodialyzers were identified from the databases of the Ministry of Health, Labor and Welfare in Japan and the Federal Drug Agency (FDA) in the United States (US). The criteria for premarket clinical trials and postmarketing safety reports were evaluated for both countries. Standards in Japan required evaluation of blood compatibility and reporting of acute adverse effects by a premarketing clinical trial in 6 of 86 applications with semipermeable membrane materials deemed to be different to those of previously approved devices from 1983 to 31 August 2015. By comparison, the clinical trial was required in one of 545 approvals in the US from 1976 to 29 January 2016, but blood compatibility was not the point. All postmarketing adverse effects identified in Japan were included in the set of 'warnings'. The more stringent requirements for evaluation of blood compatibility and acute adverse effects in Japan seemed to be related to differences in the history of quality management systems for medical devices between the two countries. This study revealed that there were differences between Japan and the US in requiring the premarketing clinical trials for the hemodialyzers. Our findings could be useful for constructing sophisticated premarketing safety evaluation.

Effects of auditing patient safety in hospital care: design of a mixed-method evaluation

PubMed Central

2013-01-01

Background Auditing of patient safety aims at early detection of risks of adverse events and is intended to encourage the continuous improvement of patient safety. The auditing should be an independent, objective assurance and consulting system. Auditing helps an organisation accomplish its objectives by bringing a systematic, disciplined approach to evaluating and improving the effectiveness of risk management, control, and governance. Audits are broadly conducted in hospitals, but little is known about their effects on the behaviour of healthcare professionals and patient safety outcomes. This study was initiated to evaluate the effects of patient safety auditing in hospital care and to explore the processes and mechanisms underlying these effects. Methods and design Our study aims to evaluate an audit system to monitor and improve patient safety in a hospital setting. We are using a mixed-method evaluation with a before-and-after study design in eight departments of one university hospital in the period October 2011–July 2014. We measure several outcomes 3 months before the audit and 15 months after the audit. The primary outcomes are adverse events and complications. The secondary outcomes are experiences of patients, the standardised mortality ratio, prolonged hospital stay, patient safety culture, and team climate. We use medical record reviews, questionnaires, hospital administrative data, and observations to assess the outcomes. A process evaluation will be used to find out which components of internal auditing determine the effects. Discussion We report a study protocol of an effect and process evaluation to determine whether auditing improves patient safety in hospital care. Because auditing is a complex intervention targeted on several levels, we are using a combination of methods to collect qualitative and quantitative data about patient safety at the patient, professional, and department levels. This study is relevant for hospitals that want to early detect unsafe care and improve patient safety continuously. Trial registration Netherlands Trial Register (NTR): NTR3343 PMID:23800253

Effects of auditing patient safety in hospital care: design of a mixed-method evaluation.

PubMed

Hanskamp-Sebregts, Mirelle; Zegers, Marieke; Boeijen, Wilma; Westert, Gert P; van Gurp, Petra J; Wollersheim, Hub

2013-06-22

Auditing of patient safety aims at early detection of risks of adverse events and is intended to encourage the continuous improvement of patient safety. The auditing should be an independent, objective assurance and consulting system. Auditing helps an organisation accomplish its objectives by bringing a systematic, disciplined approach to evaluating and improving the effectiveness of risk management, control, and governance. Audits are broadly conducted in hospitals, but little is known about their effects on the behaviour of healthcare professionals and patient safety outcomes. This study was initiated to evaluate the effects of patient safety auditing in hospital care and to explore the processes and mechanisms underlying these effects. Our study aims to evaluate an audit system to monitor and improve patient safety in a hospital setting. We are using a mixed-method evaluation with a before-and-after study design in eight departments of one university hospital in the period October 2011-July 2014. We measure several outcomes 3 months before the audit and 15 months after the audit. The primary outcomes are adverse events and complications. The secondary outcomes are experiences of patients, the standardised mortality ratio, prolonged hospital stay, patient safety culture, and team climate. We use medical record reviews, questionnaires, hospital administrative data, and observations to assess the outcomes. A process evaluation will be used to find out which components of internal auditing determine the effects. We report a study protocol of an effect and process evaluation to determine whether auditing improves patient safety in hospital care. Because auditing is a complex intervention targeted on several levels, we are using a combination of methods to collect qualitative and quantitative data about patient safety at the patient, professional, and department levels. This study is relevant for hospitals that want to early detect unsafe care and improve patient safety continuously. Netherlands Trial Register (NTR): NTR3343.

A comparative analysis of occupational health and safety risk prevention practices in Sweden and Spain.

PubMed

Morillas, Rosa María; Rubio-Romero, Juan Carlos; Fuertes, Alba

2013-12-01

Scandinavian countries such as Sweden implemented the occupational health and safety (OHS) measures in the European Directive 89/391/EEC earlier than other European counties, including Spain. In fact, statistics on workplace accident rates reveal that between 2004 and 2009, there were considerably fewer accidents in Sweden than in Spain. The objective of the research described in this paper was to reduce workplace accidents and to improve OHS management in Spain by exploring the OHS practices in Sweden. For this purpose, an exploratory comparative study was conducted, which focused on the effectiveness of the EU directive in both countries. The study included a cross-sectional analysis of workplace accident rates and other contextual indicators in both national contexts. A case study of 14 Swedish and Spanish companies identified 14 differences in the preventive practices implemented. These differences were then assessed with a Delphi study to evaluate their contribution to the reduction of workplace accidents and their potential for improving health and safety management in Spain. The results showed that there was agreement concerning 12 of the 14 practices. Finally, we discuss opportunities of improvement in Spanish companies so that they can make their risk management practices more effective. The findings of this comparative study on the implementation of the European Directive 89/391/EEC in both Sweden and Spain have revealed health and safety managerial practices which, if properly implemented, could contribute to improved work conditions and accident statistics of Spanish companies. In particular, the results suggest that Spanish employers, safety managers, external prevention services, safety deputies and Labour Inspectorates should consider implementing streamlined internal preventive management, promoting the integration of prevention responsibilities to the chain of command, and preventing health and safety management from becoming a mere exchange of documents. The authors also encourage future research studies to use the methodology presented to compare and assess the European Directive 89/391/EEC implementation in other European countries. © 2013.

Do expert assessments converge? An exploratory case study of evaluating and managing a blood supply risk.

PubMed

Eyles, John; Heddle, Nancy; Webert, Kathryn; Arnold, Emmy; McCurdy, Bronwen

2011-08-24

Examining professional assessments of a blood product recall/withdrawal and its implications for risk and public health, the paper introduces ideas about perceptions of minimal risk and its management. It also describes the context of publicly funded blood transfusion in Canada and the withdrawal event that is the basis of this study. Interviews with 45 experts from administration, medicine, blood supply, laboratory services and risk assessment took place using a multi-level sampling framework in the aftermath of the recall. These experts either directly dealt with the withdrawal or were involved in the management of the blood supply at the national level. Data from these interviews were coded in NVivo for analysis and interpretation. Analytically, data were interpreted to derive typifications to relate interview responses to risk management heuristics. While all those interviewed agreed on the importance of patient safety, differences in the ways in which the risk was contextualized and explicated were discerned. Risk was seen in terms of patient safety, liability or precaution. These different risk logics are illustrated by selected quotations. Expert assessments did not fully converge and it is possible that these different risk logics and discourses may affect the risk management process more generally, although not necessarily in a negative way. Patient safety is not to be compromised but management of blood risk in publicly funded systems may vary. We suggest ways of managing blood risk using formal and safety case approaches.

Do expert assessments converge? An exploratory case study of evaluating and managing a blood supply risk

PubMed Central

2011-01-01

Background Examining professional assessments of a blood product recall/withdrawal and its implications for risk and public health, the paper introduces ideas about perceptions of minimal risk and its management. It also describes the context of publicly funded blood transfusion in Canada and the withdrawal event that is the basis of this study. Methods Interviews with 45 experts from administration, medicine, blood supply, laboratory services and risk assessment took place using a multi-level sampling framework in the aftermath of the recall. These experts either directly dealt with the withdrawal or were involved in the management of the blood supply at the national level. Data from these interviews were coded in NVivo for analysis and interpretation. Analytically, data were interpreted to derive typifications to relate interview responses to risk management heuristics. Results While all those interviewed agreed on the importance of patient safety, differences in the ways in which the risk was contextualized and explicated were discerned. Risk was seen in terms of patient safety, liability or precaution. These different risk logics are illustrated by selected quotations. Conclusions Expert assessments did not fully converge and it is possible that these different risk logics and discourses may affect the risk management process more generally, although not necessarily in a negative way. Patient safety is not to be compromised but management of blood risk in publicly funded systems may vary. We suggest ways of managing blood risk using formal and safety case approaches. PMID:21864330

33 CFR 96.220 - What makes up a safety management system?

Code of Federal Regulations, 2011 CFR

2011-07-01

... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The safety management system must document the responsible person's— (1) Safety and pollution prevention...

High Reliability Organizations--Medication Safety.

PubMed

Yip, Luke; Farmer, Brenna

2015-06-01

High reliability organizations (HROs), such as the aviation industry, successfully engage in high-risk endeavors and have low incidence of adverse events. HROs have a preoccupation with failure and errors. They analyze each event to effect system wide change in an attempt to mitigate the occurrence of similar errors. The healthcare industry can adapt HRO practices, specifically with regard to teamwork and communication. Crew resource management concepts can be adapted to healthcare with the use of certain tools such as checklists and the sterile cockpit to reduce medication errors. HROs also use The Swiss Cheese Model to evaluate risk and look for vulnerabilities in multiple protective barriers, instead of focusing on one failure. This model can be used in medication safety to evaluate medication management in addition to using the teamwork and communication tools of HROs.

Implementing AORN recommended practices for medication safety.

PubMed

Hicks, Rodney W; Wanzer, Linda J; Denholm, Bonnie

2012-12-01

Medication errors in the perioperative setting can result in patient morbidity and mortality. The AORN "Recommended practices for medication safety" provide guidance to perioperative nurses in developing, implementing, and evaluating safe medication use practices. These practices include recognizing risk points in the medication use process, collaborating with pharmacy staff members, conducting preoperative assessments and postoperative evaluations (eg, medication reconciliation), and handling hazardous medications and pharmaceutical waste. Strategies for successful implementation of the recommended practices include promoting a basic understanding of the nurse's role in the medication use process and developing a medication management plan as well as policies and procedures that support medication safety and activities to measure compliance with safe practices. Published by Elsevier Inc.

[Patient safety in management contracts].

PubMed

Campillo-Artero, C

2012-01-01

Patient safety is becoming commonplace in management contracts. Since our experience in patient safety still falls short of other clinical areas, it is advisable to review some of its characteristics in order to improve its inclusion in these contracts. In this paper opinions and recommendations concerning the design and review of contractual clauses on safety are given, as well as reflections drawn from methodological papers and informal opinions of clinicians, who are most familiar with the nuances of safe and unsafe practices. After reviewing some features of these contracts, criteria for prioritizing and including safety objectives and activities in them, and key points for their evaluation are described. The need to replace isolated activities by systemic and multifaceted ones is emphasized. Errors, limitations and improvement opportunities observed when contracts are linked to indicators, information and adverse event reporting systems are analysed. Finally, the influence of the rules of the game, and clinicians behaviour are emphasised. Copyright © 2011 SECA. Published by Elsevier Espana. All rights reserved.

Post-Challenger evaluation of space shuttle risk assessment and management

NASA Technical Reports Server (NTRS)

1988-01-01

As the shock of the Space Shuttle Challenger accident began to subside, NASA initiated a wide range of actions designed to ensure greater safety in various aspects of the Shuttle system and an improved focus on safety throughout the National Space Transportation System (NSTS) Program. Certain specific features of the NASA safety process are examined: the Critical Items List (CIL) and the NASA review of the Shuttle primary and backup units whose failure might result in the loss of life, the Shuttle vehicle, or the mission; the failure modes and effects analyses (FMEA); and the hazard analysis and their review. The conception of modern risk management, including the essential element of objective risk assessment is described and it is contrasted with NASA's safety process in general terms. The discussion, findings, and recommendations regarding particular aspects of the NASA STS safety assurance process are reported. The 11 subsections each deal with a different aspect of the process. The main lessons learned by SCRHAAC in the course of the audit are summarized.

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

PubMed

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

Pushing and pulling: an assessment tool for occupational health and safety practitioners.

PubMed

Lind, Carl Mikael

2018-03-01

A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator's health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.

Alarm Fatigue: Use of an Evidence-Based Alarm Management Strategy.

PubMed

Turmell, Jacob W; Coke, Lola; Catinella, Rachel; Hosford, Tracy; Majeski, Amy

The purpose of this article is to describe the impact of an evidence-based alarm management strategy on patient safety. An alarm management program reduced alarms up to 30%. Evaluation of patients on continuous cardiac monitoring showed a 3.5% decrease in census. This alarm management strategy has the potential to save $136 500 and 841 hours of registered nurses' time per year. No patient harm occurred during the 2-year project.

Modeling level-of-safety for bus stops in China.

PubMed

Ye, Zhirui; Wang, Chao; Yu, Yongbo; Shi, Xiaomeng; Wang, Wei

2016-08-17

Safety performance at bus stops is generally evaluated by using historical traffic crash data or traffic conflict data. However, in China, it is quite difficult to obtain such data mainly due to the lack of traffic data management and organizational issues. In light of this, the primary objective of this study is to develop a quantitative approach to evaluate bus stop safety performance. The concept of level-of-safety for bus stops is introduced and corresponding models are proposed to quantify safety levels, which consider conflict points, traffic factors, geometric characteristics, traffic signs and markings, pavement conditions, and lighting conditions. Principal component analysis and k-means clustering methods were used to model and quantify safety levels for bus stops. A case study was conducted to show the applicability of the proposed model with data collected from 46 samples for the 7 most common types of bus stops in China, using 32 of the samples for modeling and 14 samples for illustration. Based on the case study, 6 levels of safety for bus stops were defined. Finally, a linear regression analysis between safety levels and the number of traffic conflicts showed that they had a strong relationship (R(2) value of 0.908). The results indicated that the method was well validated and could be practically used for the analysis and evaluation of bus stop safety in China. The proposed model was relatively easy to implement without the requirement of traffic crash data and/or traffic conflict data. In addition, with the proposed method, it was feasible to evaluate countermeasures to improve bus stop safety (e.g., exclusive bus lanes).

Safety analysis and review system (SARS) assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browne, E.T.

1981-03-01

Under DOE Order 5481.1, Safety Analysis and Review System for DOE Operations, safety analyses are required for DOE projects in order to ensure that: (1) potential hazards are systematically identified; (2) potential impacts are analyzed; (3) reasonable measures have been taken to eliminate, control, or mitigate the hazards; and (4) there is documented management authorization of the DOE operation based on an objective assessment of the adequacy of the safety analysis. This report is intended to provide the DOE Office of Plans and Technology Assessment (OPTA) with an independent evaluation of the adequacy of the ongoing safety analysis effort. Asmore » part of this effort, a number of site visits and interviews were conducted, and FE SARS documents were reviewed. The latter included SARS Implementation Plans for a number of FE field offices, as well as safety analysis reports completed for certain FE operations. This report summarizes SARS related efforts at the DOE field offices visited and evaluates the extent to which they fulfill the requirements of DOE 5481.1.« less

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

PubMed

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

Food Safety Crisis Management-A Comparison between Germany and the Netherlands.

PubMed

van Asselt, E D; van der Fels-Klerx, H J; Breuer, O; Helsloot, I

2017-02-01

In order to prevent food safety incidents from becoming a crisis, a good crisis management structure is essential. The aim of the current study was to compare and evaluate the national food incident response plans of 2 neighboring EU Member States: Germany and the Netherlands. This revealed that the structure of these plans is comparable, starting with initial alerting, assessment of the problem, upscaling, an execution phase and finally an evaluation of the crisis management. However, the German communication structure is more complex than the Dutch one and cross-border communication between both countries is currently limited. In general, the presence of national response plans does not guarantee a good and swift response to a food safety incident as this is often hampered by difficulties in tracing the source of the problem as well as difficulties in communication between organizations involved in crisis management. A timely detection can be improved through the development of fast screening and detecting systems and through combining various data sources using computer software systems. Mutual cooperation and communication can be improved through joint exercises or projects. This will help to streamline communication toward consumers and trade partners. Such communication should be transparent relaying not only the facts but also the uncertainties in a crisis in order to gain consumer trust and safeguard international trade. © 2017 Institute of Food Technologists®.

From the traditional concept of safety management to safety integrated with quality.

PubMed

García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O

2002-01-01

This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.

Chemical plant innovative safety investments decision-support methodology.

PubMed

Reniers, G L L; Audenaert, A

2009-01-01

This article examines the extent to which investing in safety during the creation of a new chemical installation proves profitable. The authors propose a management supporting cost-benefit model that identifies and evaluates investments in safety within a chemical company. This innovative model differentiates between serious accidents and less serious accidents, thus providing an authentic image of prevention-related costs and benefits. In classic cost-benefit analyses, which do not make such differentiations, only a rudimentary image of potential profitability resulting from investments in safety is obtained. The resulting management conclusions that can be drawn from such classical analyses are of a very limited nature. The proposed model, however, is applied to a real case study and the proposed investments in safety at an appointed chemical installation are weighed against the estimated hypothetical benefits resulting from the preventive measures to be installed at the installation. In the case-study carried out in question, it would appear that the proposed prevention investments are justified. Such an economic exercise may be very important to chemical corporations trying to (further) improve their safety investments.

78 FR 26374 - An Evaluation of the Prescription Drug User Fee Act Workload Adjuster; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... XV, ``Improving FDA Performance Management,'' subsection B, which was reauthorized by the Food and Drug Administration Safety and Innovation Act (FDASIA) of 2012. The assessment will be conducted by an... Division of Dockets Management (HFA- 305), Food and Drug Administration, 5630 Fishers Lane, rm. 1061...

75 FR 54917 - Criteria for Nominating Materials Licensees for the U.S. Nuclear Regulatory Commission's Agency...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... integral part of the evaluative process used by the agency to ensure the operational safety performance of... the AARM. The reason this additional criterion has been added is to allow NRC's senior management to..., Rockville, Maryland. NRC's Agencywide Documents Access and Management System (ADAMS): Publicly available...

Can Civility Norms Boost Positive Effects of Management Commitment to Safety?

PubMed

McGonagle, Alyssa K; Childress, Niambi M; Walsh, Benjamin M; Bauerle, Timothy J

2016-07-03

We proposed that civility norms would strengthen relationships between management commitment to safety and workers' safety motivation, safety behaviors, and injuries. Survey data were obtained from working adults in hazardous jobs-those for which physical labor is required and/or a realistic possibility of physical injury is present (N = 290). Results showed that management commitment positively related to workers' safety motivation, safety participation, and safety compliance, and negatively related to minor injuries. Furthermore, management commitment to safety displayed a stronger positive relationship with safety motivation and safety participation, and a stronger negative relationship with minor worker injuries when civility norms were high (versus low). The results confirm existing known relationships between management commitment to safety and worker safety motivation and behavior; furthermore, civility norms facilitate the relationships between management commitment to safety and various outcomes important to worker safety. In order to promote an optimally safe working environment, managers should demonstrate a commitment to worker safety and promote positive norms for interpersonal treatment between workers in their units.

A Framework to Evaluate Wildlife Feeding in Research, Wildlife Management, Tourism and Recreation.

PubMed

Dubois, Sara; Fraser, David

2013-10-11

Feeding of wildlife occurs in the context of research, wildlife management, tourism and in opportunistic ways. A review of examples shows that although feeding is often motivated by good intentions, it can lead to problems of public safety and conservation and be detrimental to the welfare of the animals. Examples from British Columbia illustrate the problems (nuisance animal activity, public safety risk) and consequences (culling, translocation) that often arise from uncontrolled feeding. Three features of wildlife feeding can be distinguished: the feasibility of control, the effects on conservation and the effects on animal welfare. An evaluative framework incorporating these three features was applied to examples of feeding from the literature. The cases of feeding for research and management purposes were generally found to be acceptable, while cases of feeding for tourism or opportunistic feeding were generally unacceptable. The framework should allow managers and policy-makers to distinguish acceptable from unacceptable forms of wildlife feeding as a basis for policy, public education and enforcement. Many harmful forms of wildlife feeding seem unlikely to change until they come to be seen as socially unacceptable.

Loss of Coolant Accident (LOCA) / Emergency Core Coolant System (ECCS Evaluation of Risk-Informed Margins Management Strategies for a Representative Pressurized Water Reactor (PWR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szilard, Ronaldo Henriques

A Risk Informed Safety Margin Characterization (RISMC) toolkit and methodology are proposed for investigating nuclear power plant core, fuels design and safety analysis, including postulated Loss-of-Coolant Accident (LOCA) analysis. This toolkit, under an integrated evaluation model framework, is name LOCA toolkit for the US (LOTUS). This demonstration includes coupled analysis of core design, fuel design, thermal hydraulics and systems analysis, using advanced risk analysis tools and methods to investigate a wide range of results.

The principle of safety evaluation in medicinal drug - how can toxicology contribute to drug discovery and development as a multidisciplinary science?

PubMed

Horii, Ikuo

2016-01-01

Pharmaceutical (drug) safety assessment covers a diverse science-field in the drug discovery and development including the post-approval and post-marketing phases in order to evaluate safety and risk management. The principle in toxicological science is to be placed on both of pure and applied sciences that are derived from past/present scientific knowledge and coming new science and technology. In general, adverse drug reactions are presented as "biological responses to foreign substances." This is the basic concept of thinking about the manifestation of adverse drug reactions. Whether or not toxic expressions are extensions of the pharmacological effect, adverse drug reactions as seen from molecular targets are captured in the category of "on-target" or "off-target", and are normally expressed as a biological defense reaction. Accordingly, reactions induced by pharmaceuticals can be broadly said to be defensive reactions. Recent molecular biological conception is in line with the new, remarkable scientific and technological developments in the medical and pharmaceutical areas, and the viewpoints in the field of toxicology have shown that they are approaching toward the same direction as well. This paper refers to the basic concept of pharmaceutical toxicology, the differences for safety assessment in each stage of drug discovery and development, regulatory submission, and the concept of scientific considerations for risk assessment and management from the viewpoint of "how can multidisciplinary toxicology contribute to innovative drug discovery and development?" And also realistic translational research from preclinical to clinical application is required to have a significant risk management in post market by utilizing whole scientific data derived from basic and applied scientific research works. In addition, the significance for employing the systems toxicology based on AOP (Adverse Outcome Pathway) analysis is introduced, and coming challenges on precision medicine are to be addressed for the new aspect of efficacy and safety evaluation.

Defining and Measuring Safety Climate: A Review of the Construction Industry Literature.

PubMed

Schwatka, Natalie V; Hecker, Steven; Goldenhar, Linda M

2016-06-01

Safety climate measurements can be used to proactively assess an organization's effectiveness in identifying and remediating work-related hazards, thereby reducing or preventing work-related ill health and injury. This review article focuses on construction-specific articles that developed and/or measured safety climate, assessed safety climate's relationship with other safety and health performance indicators, and/or used safety climate measures to evaluate interventions targeting one or more indicators of safety climate. Fifty-six articles met our inclusion criteria, 80% of which were published after 2008. Our findings demonstrate that researchers commonly defined safety climate as perception based, but the object of those perceptions varies widely. Within the wide range of indicators used to measure safety climate, safety policies, procedures, and practices were the most common, followed by general management commitment to safety. The most frequently used indicators should and do reflect that the prevention of work-related ill health and injury depends on both organizational and employee actions. Safety climate scores were commonly compared between groups (e.g. management and workers, different trades), and often correlated with subjective measures of safety behavior rather than measures of ill health or objective safety and health outcomes. Despite the observed limitations of current research, safety climate has been promised as a useful feature of research and practice activities to prevent work-related ill health and injury. Safety climate survey data can reveal gaps between management and employee perceptions, or between espoused and enacted policies, and trigger communication and action to narrow those gaps. The validation of safety climate with safety and health performance data offers the potential for using safety climate measures as a leading indicator of performance. We discuss these findings in relation to the related concept of safety culture and offer suggestions for future research and practice including (i) deriving a common definition of safety climate, (ii) developing and testing construction-specific indicators of safety climate, and (iii) focusing on construction-specific issues such as the transient workforce, subcontracting, work organization, and induction/acculturation processes. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Effects of a team-based assessment and intervention on patient safety culture in general practice: an open randomised controlled trial.

PubMed

Hoffmann, B; Müller, V; Rochon, J; Gondan, M; Müller, B; Albay, Z; Weppler, K; Leifermann, M; Mießner, C; Güthlin, C; Parker, D; Hofinger, G; Gerlach, F M

2014-01-01

The measurement of safety culture in healthcare is generally regarded as a first step towards improvement. Based on a self-assessment of safety culture, the Frankfurt Patient Safety Matrix (FraTrix) aims to enable healthcare teams to improve safety culture in their organisations. In this study we assessed the effects of FraTrix on safety culture in general practice. We conducted an open randomised controlled trial in 60 general practices. FraTrix was applied over a period of 9 months during three facilitated team sessions in intervention practices. At baseline and after 12 months, scores were allocated for safety culture as expressed in practice structure and processes (indicators), in safety climate and in patient safety incident reporting. The primary outcome was the indicator error management. During the team sessions, practice teams reflected on their safety culture and decided on about 10 actions per practice to improve it. After 12 months, no significant differences were found between intervention and control groups in terms of error management (competing probability=0.48, 95% CI 0.34 to 0.63, p=0.823), 11 further patient safety culture indicators and safety climate scales. Intervention practices showed better reporting of patient safety incidents, reflected in a higher number of incident reports (mean (SD) 4.85 (4.94) vs 3.10 (5.42), p=0.045) and incident reports of higher quality (scoring 2.27 (1.93) vs 1.49 (1.67), p=0.038) than control practices. Applied as a team-based instrument to assess safety culture, FraTrix did not lead to measurable improvements in error management. Comparable studies with more positive results had less robust study designs. In future research, validated combined methods to measure safety culture will be required. In addition, more attention should be paid to evaluation of process parameters. Implemented actions and incident reporting may be more appropriate target endpoints. German Clinical Trials Register (Deutsches Register Klinischer Studien, DRKS) No. DRKS00000145.

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

[Associations of occupational safety atmosphere and behaviors with unintentional injuries].

PubMed

Xiao, Ya-ni; Huang, Zhi-xiong; Huang, Shao-bin; Cao, Xiao-ou; Chen, Xia-ming; Liu, Xu-hua; Chen, Wei-qing

2012-07-01

To evaluate the associations of perception of safety atmosphere at workplace, occupational safety attitude and behaviors with occupational unintentional injury among manufacturing workers. A cross-sectional study was performed and a self-administered questionnaire was used to inquire socio-demographic characteristics, perceived safety atmosphere, occupational safety attitudes, occupational safety behaviors and occupational unintentional injuries among 10585 manufacturing workers selected from 46 enterprises in Guangdong. Structural equation modeling was applied to assess the relationship of the perception of safety atmosphere at workplace, occupational safety attitude, and occupational safety behaviors with occupational unintentional injury. Among 24 pathways supposed in structural equation model, 20 pathways (except for the attitude toward occupational safety, the attitude toward managers' support, the work posture and individual protection) were significantly related to the occupational unintentional injuries. The further analysis indicated that the perceived safety atmosphere might impact the occupational unintentional injuries by the attitude toward occupational safety and occupational safety behaviors. Workers' perception of safety atmosphere indirectly influenced on occupational unintentional injuries through occupational safety attitudes and occupational safety behaviors.

A review on the benchmarking concept in Malaysian construction safety performance

NASA Astrophysics Data System (ADS)

Ishak, Nurfadzillah; Azizan, Muhammad Azizi

2018-02-01

Construction industry is one of the major industries that propels Malaysia's economy in highly contributes to our nation's GDP growth, yet the high fatality rates on construction sites have caused concern among safety practitioners and the stakeholders. Hence, there is a need of benchmarking in performance of Malaysia's construction industry especially in terms of safety. This concept can create a fertile ground for ideas, but only in a receptive environment, organization that share good practices and compare their safety performance against other benefit most to establish improvement in safety culture. This research was conducted to study the awareness important, evaluate current practice and improvement, and also identify the constraint in implement of benchmarking on safety performance in our industry. Additionally, interviews with construction professionals were come out with different views on this concept. Comparison has been done to show the different understanding of benchmarking approach and how safety performance can be benchmarked. But, it's viewed as one mission, which to evaluate objectives identified through benchmarking that will improve the organization's safety performance. Finally, the expected result from this research is to help Malaysia's construction industry implement best practice in safety performance management through the concept of benchmarking.

A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

PubMed

Wachter, Jan K; Yorio, Patrick L

2014-07-01

The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Study on Project Priority Evaluation Method on Road Slope Disaster Prevention Management

NASA Astrophysics Data System (ADS)

Sekiguchi, Nobuyasu; Ohtsu, Hiroyasu; Izu, Ryuutarou

To improve the safety and security of driving while coping with today's stagnant economy and frequent natural disasters, road slopes should be appropriately managed. To achieve the goals, road managers should establish project priority evaluation methods for each stage of road slope management by clarifying social losses that would result by drops in service levels. It is important that road managers evaluate a project priority properly to manage the road slope effectively. From this viewpoint, this study proposed "project priority evaluation methods" in road slope disaster prevention, which use available slope information at each stage of road slope management under limited funds. In addition, this study investigated the effect of managing it from the high slope of the priority by evaluating a risk of slope failure. In terms of the amount of available information, staged information provision is needed ranging from macroscopic studies, which involves evaluation of the entire route at each stage of decision making, to semi- and microscopic investigations for evaluating slopes, and microscopic investigations for evaluating individual slopes. With limited funds, additional detailed surveys are difficult to perform. It is effective to use the slope risk assessment system, which was constructed to complement detailed data, to extract sites to perform precise investigations.

Performance Evaluation and Analysis of Rural Drinking Water Safety Project——A Case Study in Jiangsu, China

NASA Astrophysics Data System (ADS)

Du, Xiaorong

2017-04-01

Water is the basic condition for human survival and development. As China is the most populous country, rural drinking water safety problems are most conspicuous. Therefore, the Chinese government keeps increasing investment and has built a large number of rural drinking water safety projects. Scientific evaluation of project performance is of great significance to promote the sustainable operation of the project and the sustainable development of rural economy. Previous studies mainly focus on the economic benefits of the project, while ignoring the fact that the rural drinking water safety project is quasi-public goods, which has economic, social and ecological benefits. This paper establishes a comprehensive evaluation model for rural drinking water safety performance, which adapts the rules of "5E" (economy, efficiency, effectiveness, equity and environment) as the value orientation, and selects a rural drinking water safety project as object in case study at K District, which is in the north of Jiangsu Province, China. The results shows: 1) the comprehensive performance of K project is in good condition; 2) The performance of every part shows that the scores of criteria "efficiency", "environment" and "effect" are higher than the mean performance, while the "economy" is slightly lower than the mean and the "equity" is the lowest. 3) The performance of indicator layer shows that: the planned completion rate of project, the reduction rate of project cost and the penetration rate of water-use population are significantly lower than other indicators. Based on the achievements of previous studies and the characteristics of rural drinking water safety project, this study integrates the evaluation dimensions of equity and environment, which can contribute to a more comprehensive and systematic assessment of project performance and provide empirical data for performance evaluation and management of rural drinking water safety project. Key Words: Rural drinking water safety project; Performance evaluation; 5E rules; Comprehensive evaluation model

A Cyberbullying Intervention with Primary-Aged Students

ERIC Educational Resources Information Center

Toshack, Troy; Colmar, Susan

2012-01-01

A small-scale evaluation of a psycho-educational program on cyberbullying with a group of Year 6 girls was implemented over six sessions, and was subsequently evaluated. Its content included knowledge of cyberbullying and its effects, and management and safety strategies for the participants and their peers. Increases in the girls' detailed…

Associations between attending physician workload, teaching effectiveness, and patient safety.

PubMed

Wingo, Majken T; Halvorsen, Andrew J; Beckman, Thomas J; Johnson, Matthew G; Reed, Darcy A

2016-03-01

Prior studies suggest that high workload among attending physicians may be associated with reduced teaching effectiveness and poor patient outcomes, but these relationships have not been investigated using objective measures of workload and safety. To examine associations between attending workload, teaching effectiveness, and patient safety, hypothesizing that higher workload would be associated with lower teaching effectiveness and negative patient outcomes. We conducted a retrospective study of 69,386 teaching evaluation items submitted by 543 internal medicine residents for 107 attending physicians who supervised inpatient teaching services from July 2, 2005 to July 1, 2011. Attending workload measures included hospital service census, patient length of stay, daily admissions, daily discharges, and concurrent outpatient duties. Teaching effectiveness was measured using residents' evaluations of attendings. Patient outcomes considered were applicable patient safety indicators (PSIs), intensive care unit transfers, cardiopulmonary resuscitation/rapid response team calls, and patient deaths. Mixed linear models and generalized linear regression models were used for statistical analysis. Workload measures of midnight census and daily discharges were associated with lower teaching evaluation scores (both β = -0.026, P < 0.0001). The number of daily admissions was associated with higher teaching scores (β = 0.021, P = 0.001) and increased PSIs (odds ratio = 1.81, P = 0.0001). Several measures of attending physician workload were associated with slightly lower teaching effectiveness, and patient safety may be compromised when teams are managing new admissions. Ongoing efforts by residency programs to optimize the learning environment should include strategies to manage the workload of supervising attendings. © 2016 Society of Hospital Medicine.

Analysis on Dangerous Source of Large Safety Accident in Storage Tank Area

NASA Astrophysics Data System (ADS)

Wang, Tong; Li, Ying; Xie, Tiansheng; Liu, Yu; Zhu, Xueyuan

2018-01-01

The difference between a large safety accident and a general accident is that the consequences of a large safety accident are particularly serious. To study the tank area which factors directly or indirectly lead to the occurrence of large-sized safety accidents. According to the three kinds of hazard source theory and the consequence cause analysis of the super safety accident, this paper analyzes the dangerous source of the super safety accident in the tank area from four aspects, such as energy source, large-sized safety accident reason, management missing, environmental impact Based on the analysis of three kinds of hazard sources and environmental analysis to derive the main risk factors and the AHP evaluation model is established, and after rigorous and scientific calculation, the weights of the related factors in four kinds of risk factors and each type of risk factors are obtained. The result of analytic hierarchy process shows that management reasons is the most important one, and then the environmental factors and the direct cause and Energy source. It should be noted that although the direct cause is relatively low overall importance, the direct cause of Failure of emergency measures and Failure of prevention and control facilities in greater weight.

A PILOT SURVEY ON INJURY AND SAFETY CONCERNS IN INTERNATIONAL SLEDGE HOCKEY

PubMed Central

Finlayson, Heather; O'Connor, Russ; Anton, Hugh

2011-01-01

Objective: To describe sledge hockey injury patterns, safety issues and to develop potential injury prevention strategies. Design: Pilot survey study of international sledge hockey professionals, including trainers, physiotherapists, physicians, coaches and/or general managers. Setting: Personal encounter or online correspondence. Respondents: Sledge hockey professionals; a total of 10 respondents from the 5 top-ranked international teams recruited by personal encounter or online correspondence. Main Outcome Measurements: Descriptive Data reports on sledge athlete injury characteristics, quality of rules and enforcement, player equipment, challenges in the medical management during competition, and overall safety. Results: Muscle strains and concussions were identified as common, and injuries were reported to affect the upper body more frequently than the lower body. Overuse and body checking were predominant injury mechanisms. Safety concerns included excessive elbowing, inexperienced refereeing and inadequate equipment standards. Conclusions: This paper is the first publication primarily focused on sledge hockey injury and safety. This information provides unique opportunity for the consideration of implementation and evaluation of safety strategies. Safety interventions could include improved hand protection, cut-resistant materials in high-risk areas, increased vigilance to reduce intentional head-contact, lowered rink boards and modified bathroom floor surfacing. PMID:21904696

Blending technology and teamwork for successful management of product recalls.

PubMed

Frush, Karen; Pleasants, Jane; Shulby, Gail; Hendrix, Barbara; Berson, Brooke; Gordon, Cynthia; Cuffe, Michael S

2009-12-01

Patient safety programs have been developed in many hospitals to reduce the risk of harm to patients. Proactive, real-time, and retrospective risk-reduction strategies should be implemented in hospitals, but patient safety leaders should also be cognizant of the risks associated with thousands of products that enter the hospital through the supply chain. A growing number of recalls and alerts related to these products are received by health care facilities each year, through a recall process that is fraught with challenges. Despite the best efforts of health care providers, weaknesses and gaps in the process lead to delays, fragmentation, and disruptions, thus extending the number of days patients may be at risk from potentially faulty or misused products. To address these concerns, Duke Medicine, which comprises an academic medical center, two community hospitals, outlying clinics, physicians' offices, and home health and hospice, implemented a Web-based recall management system. Within three months, the time required to receive, deliver, and close alerts decreased from 43 days to 2.74 days. To maximize the effectiveness of the recall management process, a team of senior Duke Medicine leaders was established to evaluate the impact of product recalls and alerts on patient safety, to evaluate response action plans, and to provide oversight of patient and provider communication strategies. Alerts are now communicated more effectively and responded to in a more consistent and global manner. This comprehensive approach to product recalls is a critical component of a broader Duke Medicine strategy to improve patient safety.

[Hygiene and security management in medical biology laboratory].

PubMed

Vinner, E; Odou, M F; Fovet, B; Ghnassia, J C

2013-06-01

Risk management in Medical Biology Laboratory (MBL) which includes hygiene and waste management, is an integrated process to the whole MBL organisation. It is composed of three stages: risks factors identification, grading and prioritization, and their evaluation in the system. From the legislation and NF EN ISO 15189 standard's requirements viewpoint, prevention and protection actions to implement are described, at premises level, but also at work station environment's one (human resources and equipments) towards biological, chemical, linked to gas, to ionizing or non ionizing radiations and fire riks, in order not to compromise patients safety, employees safety, and quality results. Then, although NF EN 15189 standard only enacts requirements in terms of prevention, curative actions after established blood or chemical exposure accident are defined.

[Determinants in an occupational health and safety program implementation].

PubMed

Chaves, Sonia Cristina Lima; Santana, Vilma Sousa; de Leão, Inez Cristina Martins; de Santana, Jusiene Nogueira; de Almeida Lacerda, Lívia Maria Aragão

2009-03-01

To identify predictors for the degree to which a program that integrates occupational health surveillance with labor safety, and involves occupational health/safety specialists, company management, and employees, is implemented. This ecological study evaluated companies implementing the occupational health and safety program (OHSP) proposed by the state of Bahia's regional department of Serviço Social da Indústria (Social Services for Industry, SESI) during the 2005-2006 cycle. The companies that participated were randomly selected. Data were collected through interviews with key contacts within the companies and from technical reports issued by SESI. Multiple linear regression was used to identify factors related to the company, employee, occupational/safety specialist, and any subdimensions that might promote OHSP implementation. Of the 78 companies selected (3 384 employees), the degree to which OHSP was implemented was "advanced" in 24.4%, "intermediate" in 53.8%, and "initial" in 19.3%. Company-related, employee-related and specialist-related factors were positively associated with OHSP implementation (P < 0.001). The most important factor overall was the program's financial autonomy (beta = 4.40; P < 0.001). Bivariate analysis revealed that the degree of implementation was associated with the employees' level of health/safety knowledge (beta = 1.58; P < 0.05) and training (beta = 0.40; P < 0.001) and with communication between the occupational safety team (beta = 1.89; P < 0.01) and the health team (beta = 0.58; P < 0.05). These findings remained unchanged after adjustment for levels of education among managers and employees, salary/wages, company size, and risk. The time and resources available for employees to dedicate to occupational health and safety, the integration and reinforcement of employee and manager training programs, and improved relationship between occupational health and safety teams may contribute to the success of health and safety promotion efforts among employees.

Effect of STOP technique on safety climate in a construction company.

PubMed

Darvishi, Ebrahim; Maleki, Afshin; Dehestaniathar, Saeed; Ebrahemzadih, Mehrzad

2015-01-01

Safety programs are a core part of safety management in workplaces that can reduce incidents and injuries. The aim of this study was to investigate the influence of Safety Training Observation Program (STOP) technique as a behavior modification program on safety climate in a construction company. This cross-sectional study was carried out on workers of the Petrochemical Construction Company, western Iran. In order to improve safety climate, an unsafe behavior modification program entitled STOP was launched among workers of project during 12 months from April 2013 and April 2014. The STOP technique effectiveness in creating a positive safety climate was evaluated using the Safety Climate Assessment Toolkit. 76.78% of total behaviors were unsafe. 54.76% of total unsafe acts/ at-risk behaviors were related to the fall hazard. The most cause of unsafe behaviors was associated with habit and unavailability of safety equipment. After 12 month of continuous implementation the STOP technique, 55.8% of unsafe behaviors reduced among workers. The average score of safety climate evaluated using of the Toolkit, before and after the implementation of the STOP technique was 5.77 and 7.24, respectively. The STOP technique can be considered as effective approach for eliminating at-risk behavior, reinforcing safe work practices, and creating a positive safety climate in order to reduction incidents/injuries.

Prevention of musculoskeletal disorders within management systems: A scoping review of practices, approaches, and techniques.

PubMed

Yazdani, Amin; Neumann, W Patrick; Imbeau, Daniel; Bigelow, Philip; Pagell, Mark; Wells, Richard

2015-11-01

The purpose of this study was to identify and summarize the current research evidence on approaches to preventing musculoskeletal disorders (MSD) within Occupational Health and Safety Management Systems (OHSMS). Databases in business, engineering, and health and safety were searched and 718 potentially relevant publications were identified and examined for their relevance. Twenty-one papers met the selection criteria and were subjected to thematic analysis. There was very little literature describing the integration of MSD risk assessment and prevention into management systems. This lack of information may isolate MSD prevention, leading to difficulties in preventing these disorders at an organizational level. The findings of this review argue for further research to integrate MSD prevention into management systems and to evaluate the effectiveness of the approach. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The advancement of a new human factors report--'The Unique Report'--facilitating flight crew auditing of performance/operations as part of an airline's safety management system.

PubMed

Leva, M C; Cahill, J; Kay, A M; Losa, G; McDonald, N

2010-02-01

This paper presents the findings of research relating to the specification of a new human factors report, conducted as part of the work requirements for the Human Integration into the Lifecycle of Aviation Systems project, sponsored by the European Commission. Specifically, it describes the proposed concept for a unique report, which will form the basis for all operational and safety reports completed by flight crew. This includes all mandatory and optional reports. Critically, this form is central to the advancement of improved processes and technology tools, supporting airline performance management, safety management, organisational learning and knowledge integration/information-sharing activities. Specifically, this paper describes the background to the development of this reporting form, the logic and contents of this form and how reporting data will be made use of by airline personnel. This includes a description of the proposed intelligent planning process and the associated intelligent flight plan concept, which makes use of airline operational and safety analyses information. Primarily, this new reporting form has been developed in collaboration with a major Spanish airline. In addition, it has involved research with five other airlines. Overall, this has involved extensive field research, collaborative prototyping and evaluation of new reports/flight plan concepts and a number of evaluation activities. Participants have included both operational and management personnel, across different airline flight operations processes. Statement of Relevance: This paper presents the development of a reporting concept outlined through field research and collaborative prototyping within an airline. The resulting reporting function, embedded in the journey log compiled at the end of each flight, aims at enabling employees to audit the operations of the company they work for.

Restaurant supervisor safety training: evaluating a small business training intervention.

PubMed

Bush, Diane; Paleo, Lyn; Baker, Robin; Dewey, Robin; Toktogonova, Nurgul; Cornelio, Deogracia

2009-01-01

We developed and assessed a program designed to help small business owners/managers conduct short training sessions with their employees, involve employees in identifying and addressing workplace hazards, and make workplace changes (including physical and work practice changes) to improve workplace safety. During 2006, in partnership with a major workers' compensation insurance carrier and a restaurant trade association, university-based trainers conducted workshops for more than 200 restaurant and food service owners/managers. Workshop participants completed posttests to assess their knowledge, attitudes, and intentions to implement health and safety changes. On-site follow-up interviews with 10 participants were conducted three to six months after the training to assess the extent to which program components were used and worksite changes were made. Post-training assessments demonstrated that attendees increased their understanding and commitment to health and safety, and felt prepared to provide health and safety training to their employees. Follow-up interviews indicated that participants incorporated core program concepts into their training and supervision practices. Participants conducted training, discussed workplace hazards and solutions with employees, and made changes in the workplace and work practices to improve workers' health and safety. This program demonstrated that owners of small businesses can adopt a philosophy of employee involvement in their health and safety programs if provided with simple, easy-to-use materials and a training demonstration. Attending a workshop where they can interact with other owners/ managers of small restaurants was also a key to the program's success.

Clinical safety and effectiveness evaluation of a new antimicrobial wound dressing designed to manage exudate, infection and biofilm.

PubMed

Metcalf, Daniel G; Parsons, David; Bowler, Philip G

2017-02-01

The objective of this work was to evaluate the safety and effectiveness of a next-generation antimicrobial wound dressing (NGAD; AQUACEL ® Ag+ Extra™ dressing) designed to manage exudate, infection and biofilm. Clinicians were requested to evaluate the NGAD within their standard protocol of care for up to 4 weeks, or as long as deemed clinically appropriate, in challenging wounds that were considered to be impeded by suspected biofilm or infection. Baseline information and post-evaluation dressing safety and effectiveness data were recorded using standardised evaluation forms. This data included wound exudate levels, wound bed appearance including suspected biofilm, wound progression, skin health and dressing usage. A total of 112 wounds from 111 patients were included in the evaluations, with a median duration of 12 months, and biofilm was suspected in over half of all wounds (54%). After the introduction of the NGAD, exudate levels had shifted from predominantly high or moderate to low or moderate levels, while biofilm suspicion fell from 54% to 27% of wounds. Wound bed coverage by tissue type was generally shifted from sloughy or suspected biofilm towards predominantly granulation tissue after the inclusion of the NGAD. Stagnant (65%) and deteriorating wounds (27%) were shifted to improved (65%) or healed wounds (13%), while skin health was also reported to have improved in 63% of wounds. High levels of clinician satisfaction with the dressing effectiveness and change frequency were accompanied by a low number of dressing-related adverse events (n = 3; 2·7%) and other negative observations or comments. This clinical user evaluation supports the growing body of evidence that the anti-biofilm technology in the NGAD results in a safe and effective dressing for the management of a variety of challenging wound types. © 2016 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

33 CFR 96.220 - What makes up a safety management system?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false What makes up a safety management... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The...

[Clinical governance and patient safety culture in clinical laboratories in the Spanish National Health System].

PubMed

Giménez-Marín, Á; Rivas-Ruiz, F

To conduct a situational analysis of patient safety culture in public laboratories in the Spanish National Health System and to determine the clinical governance variables that most strongly influence patient safety. A descriptive cross-sectional study was carried out, in which a Survey of Patient Safety in Clinical Laboratories was addressed to workers in 26 participating laboratories. In this survey, which consisted of 45 items grouped into 6 areas, scores were assigned on a scale from 0 to 100 (where 0 is the lowest perception of patient safety). Laboratory managers were asked specific questions about quality management systems and technology. The mean scores for the 26 participating hospitals were evaluated, and the following results observed: in 4of the 6areas, the mean score was higher than 70 points. In the third area (equipment and resources) and the fourth area (working conditions), the scores were lower than 60 points. Every hospital had a digital medical record system. This 100% level of provision was followed by that of an electronic request management system, which was implemented in 82.6% of the hospitals. The results obtained show that the culture of security is homogeneous and of high quality in health service laboratories, probably due to the steady improvement observed. However, in terms of clinical governance, there is still some way to go, as shown by the presence of weaknesses in crucial dimensions of safety culture, together with variable levels of implementation of fail-safe technologies and quality management systems. Copyright © 2017 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Improving multiple sclerosis management and collecting safety information in the real world: the MSDS3D software approach.

PubMed

Haase, Rocco; Wunderlich, Maria; Dillenseger, Anja; Kern, Raimar; Akgün, Katja; Ziemssen, Tjalf

2018-04-01

For safety evaluation, randomized controlled trials (RCTs) are not fully able to identify rare adverse events. The richest source of safety data lies in the post-marketing phase. Real-world evidence (RWE) and observational studies are becoming increasingly popular because they reflect usefulness of drugs in real life and have the ability to discover uncommon or rare adverse drug reactions. Areas covered: Adding the documentation of psychological symptoms and other medical disciplines, the necessity for a complex documentation becomes apparent. The collection of high-quality data sets in clinical practice requires the use of special documentation software as the quality of data in RWE studies can be an issue in contrast to the data obtained from RCTs. The MSDS3D software combines documentation of patient data with patient management of patients with multiple sclerosis. Following a continuous development over several treatment-specific modules, we improved and expanded the realization of safety management in MSDS3D with regard to the characteristics of different treatments and populations. Expert opinion: eHealth-enhanced post-authorisation safety study may complete the fundamental quest of RWE for individually improved treatment decisions and balanced therapeutic risk assessment. MSDS3D is carefully designed to contribute to every single objective in this process.

Comprehensive safety management and assessment at rugby football competitions.

PubMed

Tajima, T; Chosa, E; Kawahara, K; Nakamura, Y; Yoshikawa, D; Yamaguchi, N; Kashiwagi, T

2014-11-01

The present study aims to improve medical systems by designing objective safety assessment criteria for rugby competitions. We evaluated 195 competitions between 2002 and 2011 using an original safety scale comprising the following sections: 1) competence of staff such as referees, medical attendants and match day doctor; 2) environment such as weather, wet bulb globe temperature and field conditions; and 3) emergency medical care systems at the competitions. Each section was subdivided into groups A, B and C according to good, normal or fair degrees of safety determined by combinations of the results.Overall safety was assessed as A, B and C for 110, 78 and 7 competitions, respectively. The assessments of individual major factors were mostly favorable for staff, but the environment and medical care systems were assessed as C in 25 and 70, respectively, of the 195 competitions. Medical management involves not having a match day doctor, but also comprehensive management including preventive factors and responses from the staff, environment and medical-care systems. 6 cases of severe injuries and accidents occurred between 2002 and 2011, which were observed in Grade A competition. These cases revealed better prognosis without obvious impairment, thus confirming the value of the present assessment scale. © Georg Thieme Verlag KG Stuttgart · New York.

Self-Management to Increase Safe Driving Among Short-Haul Truck Drivers

ERIC Educational Resources Information Center

Hickman, Jeffrey S.; Geller, E. Scott

2005-01-01

The relative impact of a self-management for safety (SMS) process was evaluated at two short-haul trucking terminals. Participants in the Pre-Behavior group (n = 21) recorded their intentions to engage in specific safe versus at-risk driving behaviors before leaving the terminal (i.e., before making any of their deliveries for the day), whereas…

An Exploratory Study on the Post-Implementation of Threat and Error Management Training in Australian General Aviation

ERIC Educational Resources Information Center

Lee, Seung Yong; Bates, Paul R.; Murray, Patrick S.; Martin, Wayne L.

2017-01-01

Threat and Error Management (TEM) training, endorsed and recommended by the International Civil Aviation Organisation (ICAO), was mandated in Australia with the aim of improving aviation safety. However, to date, there has been very limited, if any, formal post-implementation review, assessment or evaluation to examine the "after-state"…

The association between EMS workplace safety culture and safety outcomes.

PubMed

Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

2012-01-01

Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

The association between EMS workplace safety culture and safety outcomes

PubMed Central

Weaver, Matthew D.; Wang, Henry E.; Fairbanks, Rollin J.; Patterson, Daniel

2012-01-01

Objective Prior studies have highlighted wide variation in EMS workplace safety culture across agencies. We sought to determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. Methods We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, perceptions of working conditions, stress recognition, and job satisfaction. A panel of medical directors, paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Results Sixteen percent of all respondents reported experiencing an injury in the past 3 months, four of every 10 respondents reported an error or adverse event (AE), and 90% reported safety-compromising behaviors. Respondents reporting injury scored lower on 5 of the 6 domains of safety culture. Respondents reporting an error or AE scored lower for 4 of the 6 domains, while respondents reporting safety-compromising behavior had lower safety culture scores for 5 of 6 domains. Conclusions Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes. PMID:21950463

Safety management practices in small and medium enterprises in India.

PubMed

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M

2015-03-01

Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.

Safety Management Practices in Small and Medium Enterprises in India

PubMed Central

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M.

2014-01-01

Background Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. Methods In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. Results In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Conclusion Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project. PMID:25830070

A new leadership role for pharmacists: a prescription for change.

PubMed

Burgess, L Hayley; Cohen, Michael R; Denham, Charles R

2010-03-01

Pharmacists can play an important role as leaders to reduce patient safety risks, optimize the safe function of medication management systems, and align pharmacy services with national initiatives that measure and reward quality performance. The objective of this article is to determine the actions that pharmacists can take to create a visible and sustainable safe medication management structure and system in the health care environment. An evidence-based literature search was performed to determine what actions successful pharmacist leaders have taken to improve patient safety. There is a growing number of quality and patient safety standards, as well as measures that focus specifically on medication use and education. Health care organizations must be made aware of the valuable resources that pharmacists provide and of the complexity of medication management. There are steps that pharmacist leaders can take to achieve these goals. The 10 steps that pharmacist leaders can take to create a visible and sustainable safe medication management structure and system are the following: 1. Identify and mitigate medication management risks and hazards to reduce preventable patient harm. 2. Establish pharmacy leadership structures and systems to ensure organizational awareness of medication safety gaps. 3. Support an organizational culture of safe medication use. 4. Ensure evidence-based medication regimens for all patients. 5. Have daily check-in calls/meetings, with the primary focus on significant safety or quality issues. 6. Establish a medication safety committee. 7. Perform medication safety walk-rounds to evaluate medication processes, and request front-line staff ’s input about medication safe practices. 8. Ensure that pharmacy staff engage in teamwork, skill building, and communication training. 9. Engage in readiness planning for implementation of health information technology (HIT). 10. Include medication history-taking and reviews upon entry into the organization; medication counseling and training during the discharge process; and follow-up after the transition to home.

Regulatory science based approach in development of novel medical devices.

PubMed

Sakuma, Ichiro

2015-08-01

For development rational evaluation method for medical devices' safety and efficacy, regulatory science studies are important. Studies on regulatory affairs related to a medical device under development should be conducted as well as its technological development. Clinical performance of a medical device is influenced by performance of the device, medical doctors' skill, pathological condition of a patient, and so on. Thus it is sometimes difficult to demonstrate superiority of the device in terms of clinical outcome although its efficacy as a medical device is accepted. Setting of appropriate end points is required to evaluate a medical device appropriately. Risk assessment and risk management are the basis of medical device safety assurance. In case of medical device software, there are difficulties in identifying the risk due to its complexity of user environment and different design and manufacturing procedure compared with conventional hardware based medical devices. Recent technological advancement such as information and communication technologies (ICT) for medical devices and wireless network has raised new issue on risk management: cybersecurity. We have to watch closely the progress of safety standard development.

A discussion of occupational health and safety management for the catering industry in China.

PubMed

Qiang, Chen; Chow, Wan Ki

2007-01-01

The catering industry is developing rapidly in China. Statistics in 2002 indicated that there were over 3.5 million dining places in China, hiring over 18 million people. However, the accident rate was high. Occupational health and safety (OHS) has to be watched more carefully. It is proposed to develop an OHS management system for the catering industry and to integrate it with an ongoing management system by referring to OHSAS 18001:1999. The first step is risk identification and evaluating the major factors concerned by referring to the codes in China, the list of occupational diseases, operation rules, requirements of the law, and records of past incidents. The technological aspect has to be considered in working out the safety strategies. This includes technical measures in accident prevention at the workplace. The kitchen is the main area to be focused on. Methods for hazard identification and risk assessment of dangerous factors in kitchens are proposed in this paper.

Survey of food safety practices on small to medium-sized farms and in farmers markets.

PubMed

Harrison, Judy A; Gaskin, Julia W; Harrison, Mark A; Cannon, Jennifer L; Boyer, Renee R; Zehnder, Geoffrey W

2013-11-01

As produce consumption has increased, so have foodborne disease outbreaks associated with fresh produce. Little research has addressed food safety practices used on small to medium-sized farms selling locally or in farmers markets. This study evaluated current food safety practices used by farmers on small to medium-sized farms and managers of farmers markets in Georgia, Virginia, and South Carolina based on responses to surveys. Surveys were developed, pretested, and revised before implementation with target audiences and were implemented via mail and the Web to maximize participation, with reminders sent to nonrespondents. Data were collected from 226 farmers and 45 market managers. Frequencies and percentages were calculated for all response variables. Responses from farmers indicated that more than 56% of them use manures. Of those who use manures, 34% use raw or mixtures of raw and composted manure, and over 26% wait fewer than 90 days between application of raw manure and harvest. Over 27% use water sources that have not been tested for safety for irrigation, and 16% use such water sources for washing produce. Over 43% do not sanitize surfaces that touch produce at the farm. Only 33% of farmers always clean transport containers between uses. Responses from market managers indicated that over 42% have no food safety standards in place for the market. Only 2 to 11% ask farmers specific questions about conditions on the farm that could affect product safety. Less than 25% of managers sanitize market surfaces. Only 11% always clean market containers between uses. Over 75% of markets offer no sanitation training to workers or vendors. While farmers and market managers are using many good practices, the results indicate that some practices being used may put consumers at risk of foodborne illness. Consequently, there is a need for training for both farmers and market managers.

Restaurant manager and worker food safety certification and knowledge.

PubMed

Brown, Laura G; Le, Brenda; Wong, Melissa R; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A

2014-11-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N=387) and workers (N=365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge.

Restaurant Manager and Worker Food Safety Certification and Knowledge

PubMed Central

Brown, Laura G.; Le, Brenda; Wong, Melissa R.; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A.

2017-01-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N = 387) and workers (N = 365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge. PMID:25361386

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

33 CFR 96.320 - What is involved to complete a safety management audit and when is it required to be completed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... certificate or a Safety Management Certificate; (3) Periodic audits including— (i) An annual verification... safety management audit and when is it required to be completed? 96.320 Section 96.320 Navigation and... SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS How Will Safety Management Systems Be...

The design and implementation of hydrographical information management system (HIMS)

NASA Astrophysics Data System (ADS)

Sui, Haigang; Hua, Li; Wang, Qi; Zhang, Anming

2005-10-01

With the development of hydrographical work and information techniques, the large variety of hydrographical information including electronic charts, documents and other materials are widely used, and the traditional management mode and techniques are unsuitable for the development of the Chinese Marine Safety Administration Bureau (CMSAB). How to manage all kinds of hydrographical information has become an important and urgent problem. A lot of advanced techniques including GIS, RS, spatial database management and VR techniques are introduced for solving these problems. Some design principles and key techniques of the HIMS including the mixed mode base on B/S, C/S and stand-alone computer mode, multi-source & multi-scale data organization and management, multi-source data integration and diverse visualization of digital chart, efficient security control strategies are illustrated in detail. Based on the above ideas and strategies, an integrated system named Hydrographical Information Management System (HIMS) was developed. And the HIMS has been applied in the Shanghai Marine Safety Administration Bureau and obtained good evaluation.

The Coast Guard Proceedings of the Marine Safety and Security Council: Spring 2016

DTIC Science & Technology

2016-04-01

PROCEEDINGS Spring 2016 Vol. 73, Number 1 Safety Management System Objectives 6 Safety Management Facilitates Safe Vessel Operation Vessel systems...crew, and operations. by LCDR Aaron W. Demo 9 Safety Management Systems to Prevent Pollution from Ships Standard procedures protect the environment...by LCDR Michael Lendvay 11 Dead Reckoning by Safety Management ? Check your course. by LCDR Corydon F. Heard IV Safety Management Systems and the Outer

Science, safety, and trust: the case of transgenic food.

PubMed

Martinelli, Lucia; Karbarz, Małgorzata; Siipi, Helena

2013-02-01

Genetically modified (GM) food is discussed as an example of the controversial relation between the intrinsic uncertainty of the scientific approach and the demand of citizen-consumers to use products of science innovation that are known to be safe. On the whole, peer-reviewed studies on GM food safety do not note significant health risks, with a few exceptions, like the most renowned "Pusztai affair" and the recent "Seralini case." These latter studies have been disregarded by the scientific community, based on incorrect experimental designs and statistic analysis. Such contradictory results show the complexity of risk evaluation, and raise concerns in the citizen-consumers against the GM food. A thoughtful consideration by scientific community and decision makers of the moral values that are present in risk evaluation and risk management should be the most trustable answer to citizen-consumers to their claim for clear and definitive answers concerning safety/un-safety of GM food.

Locomotive crash energy management test plans

DOT National Transportation Integrated Search

2015-03-23

The Office of Research, Development, and Technology of the Federal Railroad Administration (FRA) and the Volpe Center are continuing to evaluate new technologies for increasing the safety of passengers and operators in rail equipment. The results of ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poncio, S.; Adkison, P.

Coating costs are escalating due to increased awareness of the environment and safety and health issues. Owners can reduce the overall cost of maintenance painting projects through the implementation of a total quality program. This program should encompass project pre-planning, evaluation of safety and quality assurance programs, and analysis of employee absenteeism and turnover. The information presented is a case history of one utility's experience managing a maintenance painting program during a five-year period.

Efficacy and safety of ethynodiol diacetate, 1 mg, with ethinyl estradiol, 35 micrograms, with an emphasis on contraceptive efficacy. A phase IV trial.

PubMed

Friedman, A J; Wheeler, J

1991-04-01

A phase IV trial evaluated the efficacy and safety of a monophasic oral contraceptive formulation, ethynodiol diacetate, 1 mg, plus ethinyl estradiol, 35 micrograms (EDA 1 mg with EE 35 micrograms) (Demulen 1/35). Nine hundred eighty-three community-based obstetrician-gynecologists treated a total of 7,759 patients with EDA 1 mg with EE 35 micrograms for one to eight months. Clinical evaluation forms on 6,382 patients were amenable to analysis for safety (including breakthrough bleeding, ovarian cyst formation and complexion changes); 5,412 patients were evaluable for efficacy (prevention of pregnancy), with a total of 21,440 cycles recorded. The study results were interpreted in terms of the impact on clinical management of oral contraceptive users and the methods, strengths and weaknesses of phase IV trials, particularly as they relate to confirmation of the results reported here.

Safety management by walking around (SMBWA): a safety intervention program based on both peer and manager participation.

PubMed

Luria, Gil; Morag, Ido

2012-03-01

"Management by walking around" (MBWA) is a practice that has aroused much interest in management science and practice. The purpose of this study is to demonstrate adaptation of this practice to safety management. We describe a three-year long case study that collected empirical data in which a modified MBWA was practiced in order to improve safety in a semiconductor fabrication facility. The main modification involved integrating an information system with the MBWA in order to create a practice that would generate safety leadership development and an organizational safety learning mechanism, while promoting employee safety participation. The results of the case study demonstrate that the SMBWA practice facilitated thousands of tours in which safety leadership behaviors were practiced by managers and by employees (employees performed five times as many tours as managers). The information system collected information about safety behaviors and safety conditions that could not otherwise be obtained. Thus, this study presents a new organizational safety practice SMBWA, and demonstrates the ways in which SMBWA may improve safety in organizations. Copyright © 2011 Elsevier Ltd. All rights reserved.

Using ADOPT Algorithm and Operational Data to Discover Precursors to Aviation Adverse Events

NASA Technical Reports Server (NTRS)

Janakiraman, Vijay; Matthews, Bryan; Oza, Nikunj

2018-01-01

The US National Airspace System (NAS) is making its transition to the NextGen system and assuring safety is one of the top priorities in NextGen. At present, safety is managed reactively (correct after occurrence of an unsafe event). While this strategy works for current operations, it may soon become ineffective for future airspace designs and high density operations. There is a need for proactive management of safety risks by identifying hidden and "unknown" risks and evaluating the impacts on future operations. To this end, NASA Ames has developed data mining algorithms that finds anomalies and precursors (high-risk states) to safety issues in the NAS. In this paper, we describe a recently developed algorithm called ADOPT that analyzes large volumes of data and automatically identifies precursors from real world data. Precursors help in detecting safety risks early so that the operator can mitigate the risk in time. In addition, precursors also help identify causal factors and help predict the safety incident. The ADOPT algorithm scales well to large data sets and to multidimensional time series, reduce analyst time significantly, quantify multiple safety risks giving a holistic view of safety among other benefits. This paper details the algorithm and includes several case studies to demonstrate its application to discover the "known" and "unknown" safety precursors in aviation operation.

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARTER, R.P.

1999-11-19

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective.

Safety leadership and systems thinking: application and evaluation of a Risk Management Framework in the mining industry.

PubMed

Donovan, Sarah-Louise; Salmon, Paul M; Lenné, Michael G; Horberry, Tim

2017-10-01

Safety leadership is an important factor in supporting safety in high-risk industries. This article contends that applying systems-thinking methods to examine safety leadership can support improved learning from incidents. A case study analysis was undertaken of a large-scale mining landslide incident in which no injuries or fatalities were incurred. A multi-method approach was adopted, in which the Critical Decision Method, Rasmussen's Risk Management Framework and Accimap method were applied to examine the safety leadership decisions and actions which enabled the safe outcome. The approach enabled Rasmussen's predictions regarding safety and performance to be examined in the safety leadership context, with findings demonstrating the distribution of safety leadership across leader and system levels, and the presence of vertical integration as key to supporting the successful safety outcome. In doing so, the findings also demonstrate the usefulness of applying systems-thinking methods to examine and learn from incidents in terms of what 'went right'. The implications, including future research directions, are discussed. Practitioner Summary: This paper presents a case study analysis, in which systems-thinking methods are applied to the examination of safety leadership decisions and actions during a large-scale mining landslide incident. The findings establish safety leadership as a systems phenomenon, and furthermore, demonstrate the usefulness of applying systems-thinking methods to learn from incidents in terms of what 'went right'. Implications, including future research directions, are discussed.

Industrial Hygiene Issues

NASA Technical Reports Server (NTRS)

Brisbin, Steven G.

1999-01-01

This breakout session is a traditional conference instrument used by the NASA industrial hygiene personnel as a method to convene personnel across the Agency with common interests. This particular session focused on two key topics, training systems and automation of industrial hygiene data. During the FY 98 NASA Occupational Health Benchmarking study, the training system under development by the U.S. Environmental Protection Agency (EPA) was deemed to represent a "best business practice." The EPA has invested extensively in the development of computer based training covering a broad range of safety, health and environmental topics. Currently, five compact disks have been developed covering the topics listed: Safety, Health and Environmental Management Training for Field Inspection Activities; EPA Basic Radiation Training Safety Course; The OSHA 600 Collateral Duty Safety and Health Course; and Key program topics in environmental compliance, health and safety. Mr. Chris Johnson presented an overview of the EPA compact disk-based training system and answered questions on its deployment and use across the EPA. This training system has also recently been broadly distributed across other Federal Agencies. The EPA training system is considered "public domain" and, as such, is available to NASA at no cost in its current form. Copies of the five CD set of training programs were distributed to each NASA Center represented in the breakout session. Mr. Brisbin requested that each NASA Center review the training materials and determine whether there is interest in using the materials as it is or requesting that EPA tailor the training modules to suit NASA's training program needs. The Safety, Health and Medical Services organization at Ames Research Center has completed automation of several key program areas. Mr. Patrick Hogan, Safety Program Manager for Ames Research Center, presented a demonstration of the automated systems, which are described by the following: (1) Safety, Health and Environmental Training. This system includes an assessment of training needs for every NASA Center organization, course descriptions, schedules and automated course scheduling, and presentation of training program metrics; (2) Safety and Health Inspection Information. This system documents the findings from each facility inspection, tracks abatement status on those findings and presents metrics on each department for senior management review; (3) Safety Performance Evaluation Profile. The survey system used by NASA to evaluate employee and supervisory perceptions of safety programs is automated in this system; and (4) Documentation Tracking System. Electronic archive and retrieval of all correspondence and technical reports generated by the Safety, Health and Medical Services Office are provided by this system.

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

NASA Astrophysics Data System (ADS)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

Tiger Team Assessment of the Ames Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

This report documents the Tiger Assessment of the Ames Laboratory (Ames), located in Ames, Iowa. Ames is operated for the US Department of Energy (DOE) by Iowa State University. The assessment was conducted from February 10 to March 5, 1992, under the auspices of the Office of Special Projects, Office of the Assistant Secretary of Environment, Safety and Health, Headquarters, DOE. The assessment was comprehensive, encompassing Environment, Safety, and Health (ES H) disciplines; management practices; and contractor and DOE self-assessments. Compliance with applicable Federal, State of Iowa, and local regulations; applicable DOE Orders; best management practices; and internal requirements atmore » Ames Laboratory were assessed. In addition, an evaluation of the adequacy and effectiveness of DOE and the site contractor's management of ES H/quality assurance program was conducted.« less

Development of Risk Assessment Matrix for NASA Engineering and Safety Center

NASA Technical Reports Server (NTRS)

Malone, Roy W., Jr.; Moses, Kelly

2004-01-01

This paper describes a study, which had as its principal goal the development of a sufficiently detailed 5 x 5 Risk Matrix Scorecard. The purpose of this scorecard is to outline the criteria by which technical issues can be qualitatively and initially prioritized. The tool using this score card has been proposed to be one of the information resources the NASA Engineering and Safety Center (NESC) takes into consideration when making decisions with respect to incoming information on safety concerns across the entire NASA agency. The contents of this paper discuss in detail each element of the risk matrix scorecard, definitions for those elements and the rationale behind the development of those definitions. This scorecard development was performed in parallel with the tailoring of the existing Futron Corporation Integrated Risk Management Application (IRMA) software tool. IRMA was tailored to fit NESC needs for evaluating incoming safety concerns and was renamed NESC Assessment Risk Management Application (NAFMA) which is still in developmental phase.

[Alcohol and work: the role of the company physician in the occupational health and safety management systems].

PubMed

Patussi, V; Muran, A

2010-01-01

The organization of safety in the working places and the increasing attention to behaviours and life styles of workers that may lead to increasing occupational risks are the pick innovative aspects of the recent changes in our country's legislation about occupational safety. In this organization, the role of the company physician is becoming more and more important and his work of evaluation beginning with the knowledge both of the working places and of the workers's lifestyles, is irreplaceable. His role in organizing the managing standards of occupational safety and health cannot be limited to health supervision but must be an essential element in risk assessment in the prevision of workplaces and of safe working conditions, in workers training and information, in organizing the control system of each business. The present paper examines--referring to the current regulation--the duties and functions of a company physician when facing the problems concerning the working risks tied to alcohol assumption.

Swedish translation and psychometric testing of the safety attitudes questionnaire (operating room version).

PubMed

Göras, Camilla; Wallentin, Fan Yang; Nilsson, Ulrica; Ehrenberg, Anna

2013-03-19

Tens of millions of patients worldwide suffer from avoidable disabling injuries and death every year. Measuring the safety climate in health care is an important step in improving patient safety. The most commonly used instrument to measure safety climate is the Safety Attitudes Questionnaire (SAQ). The aim of the present study was to establish the validity and reliability of the translated version of the SAQ. The SAQ was translated and adapted to the Swedish context. The survey was then carried out with 374 respondents in the operating room (OR) setting. Data was received from three hospitals, a total of 237 responses. Cronbach's alpha and confirmatory factor analysis (CFA) was used to evaluate the reliability and validity of the instrument. The Cronbach's alpha values for each of the factors of the SAQ ranged between 0.59 and 0.83. The CFA and its goodness-of-fit indices (SRMR 0.055, RMSEA 0.043, CFI 0.98) showed good model fit. Intercorrelations between the factors safety climate, teamwork climate, job satisfaction, perceptions of management, and working conditions showed moderate to high correlation with each other. The factor stress recognition had no significant correlation with teamwork climate, perception of management, or job satisfaction. Therefore, the Swedish translation and psychometric testing of the SAQ (OR version) has good construct validity. However, the reliability analysis suggested that some of the items need further refinement to establish sound internal consistency. As suggested by previous research, the SAQ is potentially a useful tool for evaluating safety climate. However, further psychometric testing is required with larger samples to establish the psychometric properties of the instrument for use in Sweden.

Differences in Hospital Managers', Unit Managers', and Health Care Workers' Perceptions of the Safety Climate for Respiratory Protection.

PubMed

Peterson, Kristina; Rogers, Bonnie M E; Brosseau, Lisa M; Payne, Julianne; Cooney, Jennifer; Joe, Lauren; Novak, Debra

2016-07-01

This article compares hospital managers' (HM), unit managers' (UM), and health care workers' (HCW) perceptions of respiratory protection safety climate in acute care hospitals. The article is based on survey responses from 215 HMs, 245 UMs, and 1,105 HCWs employed by 98 acute care hospitals in six states. Ten survey questions assessed five of the key dimensions of safety climate commonly identified in the literature: managerial commitment to safety, management feedback on safety procedures, coworkers' safety norms, worker involvement, and worker safety training. Clinically and statistically significant differences were found across the three respondent types. HCWs had less positive perceptions of management commitment, worker involvement, and safety training aspects of safety climate than HMs and UMs. UMs had more positive perceptions of management's supervision of HCWs' respiratory protection practices. Implications for practice improvements indicate the need for frontline HCWs' inclusion in efforts to reduce safety climate barriers and better support effective respiratory protection programs and daily health protection practices. © 2016 The Author(s).

75 FR 68224 - Safety Management Systems for Part 121 Certificate Holders

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... the general framework for an organization-wide safety management approach to air carrier operations... System? An SMS is an organization-wide approach to managing safety risk and assuring the effectiveness of... under 14 CFR part 121 to develop and implement a safety management system (SMS) to improve the safety of...

Patient safety trilogy: perspectives from clinical engineering.

PubMed

Gieras, Izabella; Sherman, Paul; Minsent, Dennis

2013-01-01

This article examines the role a clinical engineering or healthcare technology management (HTM) department can play in promoting patient safety from three different perspectives: a community hospital, a national government health system, and an academic medical center. After a general overview, Izabella Gieras from Huntington Hospital in Pasadena, CA, leads off by examining the growing role of human factors in healthcare technology, and describing how her facility uses clinical simulations in medical equipment evaluations. A section by Paul Sherman follows, examining patient safety initiatives from the perspective of the Veterans Health Administration with a focus on hazard alerts and recalls. Dennis Minsent from Oregon Health & Science University writes about patient safety from an academic healthcare perspective, and details how clinical engineers can engage in multidisciplinary safety opportunities.

A Strategy for Improved System Assurance

DTIC Science & Technology

2007-06-20

Quality (Measurements Life Cycle Safety, Security & Others) ISO /IEC 12207 * Software Life Cycle Processes ISO 9001 Quality Management System...14598 Software Product Evaluation Related ISO /IEC 90003 Guidelines for the Application of ISO 9001:2000 to Computer Software IEEE 12207 Industry...Implementation of International Standard ISO /IEC 12207 IEEE 1220 Standard for Application and Management of the System Engineering Process Use in

Report to the administrator by the NASA Aerospace Safety Advisory Panel on the Skylab program. Volume 2: Program implementation and maturity. [systems management evaluation and design analysis

NASA Technical Reports Server (NTRS)

1973-01-01

Results of the design and manufacturing reviews on the maturity of the Skylab modules are presented along with results of investigations on the scope of the cluster risk assessment efforts. The technical management system and its capability to assess and resolve problems are studied.

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

Traffic conflict techniques for safety and operations : observers manual

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Institutional and Organizational Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the San Diego Integrated Corridor Management (ICM) Initiative Demonstration. T...

21 CFR 5.1100 - Headquarters.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Laboratories Complex Staff. Division of Engineering Services. Environment, Safety And Strategic Initiatives.... Office of Cellular, Tissue, and Gene Therapies. Regulatory Management Staff. Division of Cellular and Gene Therapies. Division of Clinical Evaluation and Pharmacology/Toxicology. Division of Human Tissues...

Colorado Transportation Management Center (CTMC) integration project (FY01 Earmark) : local evaluation report

DOT National Transportation Integrated Search

2007-11-09

The CTMC Integration Project is the result of FY01 congressionally designated earmarks to improve transportation efficiency, promote safety, increase traffic flow, reduce emissions, improve traveler information dissemination, enhance alternate transp...

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors.

PubMed

Wu, Tsung-Chih; Chen, Chi-Hsiang; Yi, Nai-Wen; Lu, Pei-Chen; Yu, Shan-Chi; Wang, Chien-Peng

2016-12-03

Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs). The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs' perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%). Exploratory factor analysis indicated that the hazard management scale (HMS) extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent) were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA) indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards.

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors

PubMed Central

Wu, Tsung-Chih; Chen, Chi-Hsiang; Yi, Nai-Wen; Lu, Pei-Chen; Yu, Shan-Chi; Wang, Chien-Peng

2016-01-01

Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs). The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs’ perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%). Exploratory factor analysis indicated that the hazard management scale (HMS) extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent) were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA) indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards. PMID:27918474

Efficacy and safety of bisphosphonates in management of low bone density in inflammatory bowel disease

PubMed Central

Yao, Liwei; Wang, Haiqing; Dong, Wenwei; Liu, Zhenxin; Mao, Haijiao

2017-01-01

Abstract This study aims to determine whether bisphosphonates are safe, as well as effective against bone mineral loss in inflammatory bowel disease (IBD). A computerized search of electronic databases from 1966 to 2016 was performed. Randomized controlled trials (RCTs) were included in this review to evaluate the role of bisphosphonates in the management of osteoporosis in IBD patients. A revised 7-point Jadad scale was used to evaluate the quality of each study. Overall, 13 RCTs and 923 patients met the inclusion criteria of this meta-analysis. The result showed that bisphosphonates decreased bone mass density (BMD) loss at the lumbar spine (P = 0.0002), reduced the risk of new fractures (P = 0.01), and retained the similar adverse events (P = 0.86). Bisphosphonates may provide protection and safety against bone mineral loss in IBD patients. PMID:28099343

Efficacy and safety of bisphosphonates in management of low bone density in inflammatory bowel disease: A meta-analysis.

PubMed

Yao, Liwei; Wang, Haiqing; Dong, Wenwei; Liu, Zhenxin; Mao, Haijiao

2017-01-01

This study aims to determine whether bisphosphonates are safe, as well as effective against bone mineral loss in inflammatory bowel disease (IBD). A computerized search of electronic databases from 1966 to 2016 was performed. Randomized controlled trials (RCTs) were included in this review to evaluate the role of bisphosphonates in the management of osteoporosis in IBD patients. A revised 7-point Jadad scale was used to evaluate the quality of each study. Overall, 13 RCTs and 923 patients met the inclusion criteria of this meta-analysis. The result showed that bisphosphonates decreased bone mass density (BMD) loss at the lumbar spine (P = 0.0002), reduced the risk of new fractures (P = 0.01), and retained the similar adverse events (P = 0.86). Bisphosphonates may provide protection and safety against bone mineral loss in IBD patients.

[Management, quality of health and occupational safety and hospital organization: is integration possible?].

PubMed

Corrao, Carmela Romana Natalina

2011-01-01

The evolution of the national and European legislation has progressively transformed the working environments into organized environments. Specific models for its management are being proposed, which should be integrated into general management strategies. In the case of hospitals this integration should consider the peculiar organizational complexity, where the management of the occupational risk needs to be integrated with clinical risk management and economic risk management. Resources management should also consider that Occupational Medicine has not a direct monetary benefit for the organisation, but only indirect health consequences in terms of reduction of accidents and occupational diseases. The deep and simultaneous analysis of the current general management systems and the current management methods of occupational safety and health protection allows one to hyphotesise a possible integration between them. For both of them the Top Management is the main responsible of the quality management strategies and the use of specific documents in the managerial process, such as the document of risks evaluation in the occupational management and the quality manual in the general management, is of paramount importance. An integrated management has also the scope to pursue a particular kind of quality management, where ethics and job satisfaction are innovative, as established by recent European guidelines, management systems and national legislations.

30 CFR 585.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., COPs and GAPs Safety Management Systems § 585.810 What must I include in my Safety Management System? You must submit a description of the Safety Management System you will use with your COP (provided...

30 CFR 585.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., COPs and GAPs Safety Management Systems § 585.810 What must I include in my Safety Management System? You must submit a description of the Safety Management System you will use with your COP (provided...

30 CFR 585.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., COPs and GAPs Safety Management Systems § 585.810 What must I include in my Safety Management System? You must submit a description of the Safety Management System you will use with your COP (provided...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

? Click Here! Resources for MSD Safety MSD Safety MSD's Integrated Safety Management Plan [PDF] Safety culture and policies at MSD MSD0010: Integrated Safety Management: Principles and Case Studies Calendar for MSD classes on Integrated Safety Management MSD0015 Handout - Waste Briefing Document [PDF] Waste

Effects of organizational safety on employees' proactivity safety behaviors and occupational health and safety management systems in Chinese high-risk small-scale enterprises.

PubMed

Mei, Qiang; Wang, Qiwei; Liu, Suxia; Zhou, Qiaomei; Zhang, Jingjing

2018-06-07

Based on the characteristics of small-scale enterprises, the improvement of occupational health and safety management systems (OHS MS) needs an effective intervention. This study proposed a structural equation model and examined the relationships of perceived organization support for safety (POSS), person-organization safety fit (POSF) and proactivity safety behaviors with safety management, safety procedures and safety hazards identification. Data were collected from 503 employees of 105 Chinese high-risk small-scale enterprises over 6 months. The results showed that both POSS and POSF were positively related to improvement in safety management, safety procedures and safety hazards identification through proactivity safety behaviors. Our findings provide a new perspective on organizational safety for improving OHS MS for small-scale enterprises and extend the application of proactivity safety behaviors.

Identifying behaviour patterns of construction safety using system archetypes.

PubMed

Guo, Brian H W; Yiu, Tak Wing; González, Vicente A

2015-07-01

Construction safety management involves complex issues (e.g., different trades, multi-organizational project structure, constantly changing work environment, and transient workforce). Systems thinking is widely considered as an effective approach to understanding and managing the complexity. This paper aims to better understand dynamic complexity of construction safety management by exploring archetypes of construction safety. To achieve this, this paper adopted the ground theory method (GTM) and 22 interviews were conducted with participants in various positions (government safety inspector, client, health and safety manager, safety consultant, safety auditor, and safety researcher). Eight archetypes were emerged from the collected data: (1) safety regulations, (2) incentive programs, (3) procurement and safety, (4) safety management in small businesses (5) production and safety, (6) workers' conflicting goals, (7) blame on workers, and (8) reactive and proactive learning. These archetypes capture the interactions between a wide range of factors within various hierarchical levels and subsystems. As a free-standing tool, they advance the understanding of dynamic complexity of construction safety management and provide systemic insights into dealing with the complexity. They also can facilitate system dynamics modelling of construction safety process. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Art World's Concept of Negative Space Applied to System Safety Management

NASA Technical Reports Server (NTRS)

Goodin, James Ronald (Ronnie)

2005-01-01

Tools from several different disciplines can improve system safety management. This paper relates the Art World with our system safety world, showing useful art schools of thought applied to system safety management, developing an art theory-system safety bridge. This bridge is then used to demonstrate relations with risk management, the legal system, personnel management and basic management (establishing priorities). One goal of this presentation/paper is simply to be a fun diversion from the many technical topics presented during the conference.

Phase II -- Photovoltaics for Utility Scale Applications (PVUSA): Safety and health action plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, K.

1994-09-01

To establish guidelines for the implementation and administration of an injury and illness prevention program for PVUSA and to assign specific responsibilities for the execution of the program. To provide a basic Safety and Health Action Plan (hereinafter referred to as Plan) that assists management, supervision, and project personnel in the recognition, evaluation, and control of hazardous activities and/or conditions within their respective areas of responsibility.

Disability management: the application of preventive measures, health promotion and case management in Italy.

PubMed

La Torre, G; De Giusti, M; Mannocci, A; De Waure, C; Agostinelli, A; Schena, S; Capelli, G; Ricciardi, W; Boccia, A; Damiani, G; von Pinoci, M; Fanton, C; Federico, B

2009-03-01

Disability Management can be defined as a practice to improve workers' health and to reduce the impact and costs of disability. The aim of the study was to estimate the diffusion of DM in Italian companies. A survey was conducted using a questionnaire, the Worksite Disability Management Audit. The questionnaire was structured into five parts addressing the following domains: 1) characteristics of the company; 2) health promotion activities; 3) preventive measures; 4) case management; 5) disability management. We selected public and private companies and collected information by direct interview. Twenty companies entered the survey. Twelve Companies (60%) indicated that health promotion programs and sensibilisation campaigns are usually carried out. The presence of an individual who provided workplace safety indications and materials was stated by 19 companies (95%). Periodical medical examinations are carried out by 19 companies (95%); 16 (80%) have an evaluation process for ergonomics concerns. Risk assessment and analysis are performed by all companies and the security procedures and policies are updated at least once in a year in 40% of cases. Health status monitoring of injured workers is performed in eight (40%) of the companies, while Disability Management is present as a whole in only three companies. This survey highlights that Disability Management is not undertaken in most companies and that, where applied, there is still confusion and disorganization about ways to promote health and manage workers' illness and disability. Hence, there is still the need to promote an all-inclusive evaluation and management of workers' safety, illness and disabilities.

Simulation studies for the evaluation of health information technologies: experiences and results.

PubMed

Ammenwerth, Elske; Hackl, Werner O; Binzer, Kristine; Christoffersen, Tue E H; Jensen, Sanne; Lawton, Kitta; Skjoet, Peter; Nohr, Christian

It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management system on the appropriateness of prescriptions and drug-related activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, five distinct situations were identified where the new medication management system did help to improve medication safety. This simulation study provided a good compromise between internal validity and external validity. However, several challenges need to be addressed when undertaking simulation evaluations including: preparation of adequate test cases; training of participants before using unfamiliar applications; consideration of time, effort and costs of conducting the simulation; technical maturity of the evaluated system; and allowing adequate preparation of simulation scenarios and simulation setting. Simulation studies are an interesting but time-consuming approach, which can be used to evaluate newly developed health IT systems, particularly those systems that are not yet sufficiently mature to undergo field evaluation studies.

The Development and Initial Evaluation of the Human Readiness Level Framework

DTIC Science & Technology

2010-06-01

View ICD Initial Capabilities Document ICW Interactive Course Ware ILE Interactive Learning Environment ILT Instructor Led Training IOC...Programmatic Environmental Safety and Health Evaluation PHA Preliminary Hazard Analysis PHL Preliminary Hazard List xiv PM Program Manager PQS...Occupational Health SOW Statement of Work SRD System Requirements Document SPS System Performance Specification SRR System Requirements Review SVR

Practical Solutions for Pesticide Safety: A Farm and Research Team Participatory Model

PubMed Central

Galvin, Kit; Krenz, Jen; Harrington, Marcy; Palmández, Pablo; Fenske, Richard A.

2018-01-01

Development of the Practical Solutions for Pesticide Safety guide used participatory research strategies to identify and evaluate solutions that reduce pesticide exposures for workers and their families and to disseminate these solutions. Project principles were (1) workplace chemicals belong in the workplace, and (2) pesticide handlers and farm managers are experts, with direct knowledge of production practices. The project’s participatory methods were grounded in self-determination theory. Practical solutions were identified and evaluated based on five criteria: practicality, adaptability, health and safety, novelty, and regulatory compliance. Research activities that had more personal contact provided better outcomes. The Expert Working Group, composed of farm managers and pesticide handlers, was key to the identification of solutions, as were farm site visits. Audience participation, hands-on testing, and orchard field trials were particularly effective in the evaluation of potential solutions. Small work groups in a Regional Advisory Committee provided the best direction and guidance for a “user-friendly” translational document that provided evidence-based practical solutions. The “farmer to farmer” format of the guide was endorsed by both the Expert Working Group and the Regional Advisory Committee. Managers and pesticide handlers wanted to share their solutions in order to “help others stay safe,” and they appreciated attribution in the guide. The guide is now being used in educational programs across the region. The fundamental concept that farmers and farmworkers are innovators and experts in agricultural production was affirmed by this study. The success of this process demonstrates the value of participatory industrial hygiene in agriculture. PMID:26488540

Practical Solutions for Pesticide Safety: A Farm and Research Team Participatory Model.

PubMed

Galvin, Kit; Krenz, Jen; Harrington, Marcy; Palmández, Pablo; Fenske, Richard A

2016-01-01

Development of the Practical Solutions for Pesticide Safety guide used participatory research strategies to identify and evaluate solutions that reduce pesticide exposures for workers and their families and to disseminate these solutions. Project principles were (1) workplace chemicals belong in the workplace, and (2) pesticide handlers and farm managers are experts, with direct knowledge of production practices. The project's participatory methods were grounded in self-determination theory. Practical solutions were identified and evaluated based on five criteria: practicality, adaptability, health and safety, novelty, and regulatory compliance. Research activities that had more personal contact provided better outcomes. The Expert Working Group, composed of farm managers and pesticide handlers, was key to the identification of solutions, as were farm site visits. Audience participation, hands-on testing, and orchard field trials were particularly effective in the evaluation of potential solutions. Small work groups in a Regional Advisory Committee provided the best direction and guidance for a "user-friendly" translational document that provided evidence-based practical solutions. The "farmer to farmer" format of the guide was endorsed by both the Expert Working Group and the Regional Advisory Committee. Managers and pesticide handlers wanted to share their solutions in order to "help others stay safe," and they appreciated attribution in the guide. The guide is now being used in educational programs across the region. The fundamental concept that farmers and farmworkers are innovators and experts in agricultural production was affirmed by this study. The success of this process demonstrates the value of participatory industrial hygiene in agriculture.

Application of quantitative microbial risk assessments for estimation of risk management metrics: Clostridium perfringens in ready-to-eat and partially cooked meat and poultry products as an example.

PubMed

Crouch, Edmund A; Labarre, David; Golden, Neal J; Kause, Janell R; Dearfield, Kerry L

2009-10-01

The U.S. Department of Agriculture, Food Safety and Inspection Service is exploring quantitative risk assessment methodologies to incorporate the use of the Codex Alimentarius' newly adopted risk management metrics (e.g., food safety objectives and performance objectives). It is suggested that use of these metrics would more closely tie the results of quantitative microbial risk assessments (QMRAs) to public health outcomes. By estimating the food safety objective (the maximum frequency and/or concentration of a hazard in a food at the time of consumption) and the performance objective (the maximum frequency and/or concentration of a hazard in a food at a specified step in the food chain before the time of consumption), risk managers will have a better understanding of the appropriate level of protection (ALOP) from microbial hazards for public health protection. We here demonstrate a general methodology that allows identification of an ALOP and evaluation of corresponding metrics at appropriate points in the food chain. It requires a two-dimensional probabilistic risk assessment, the example used being the Monte Carlo QMRA for Clostridium perfringens in ready-to eat and partially cooked meat and poultry products, with minor modifications to evaluate and abstract required measures. For demonstration purposes, the QMRA model was applied specifically to hot dogs produced and consumed in the United States. Evaluation of the cumulative uncertainty distribution for illness rate allows a specification of an ALOP that, with defined confidence, corresponds to current industry practices.

Corporate Functional Management Evaluation of the LLNL Radiation Safety Organization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sygitowicz, L S

2008-03-20

A Corporate Assess, Improve, and Modernize review was conducted at Lawrence Livermore National Laboratory (LLNL) to evaluate the LLNL Radiation Safety Program and recommend actions to address the conditions identified in the Internal Assessment conducted July 23-25, 2007. This review confirms the findings of the Internal Assessment of the Institutional Radiation Safety Program (RSP) including the noted deficiencies and vulnerabilities to be valid. The actions recommended are a result of interviews with about 35 individuals representing senior management through the technician level. The deficiencies identified in the LLNL Internal Assessment of the Institutional Radiation Safety Program were discussed with Radiationmore » Safety personnel team leads, customers of Radiation Safety Program, DOE Livermore site office, and senior ES&H management. There are significant issues with the RSP. LLNL RSP is not an integrated, cohesive, consistently implemented program with a single authority that has the clear roll and responsibility and authority to assure radiological operations at LLNL are conducted in a safe and compliant manner. There is no institutional commitment to address the deficiencies that are identified in the internal assessment. Some of these deficiencies have been previously identified and corrective actions have not been taken or are ineffective in addressing the issues. Serious funding and staffing issues have prevented addressing previously identified issues in the Radiation Calibration Laboratory, Internal Dosimetry, Bioassay Laboratory, and the Whole Body Counter. There is a lack of technical basis documentation for the Radiation Calibration Laboratory and an inadequate QA plan that does not specify standards of work. The Radiation Safety Program lack rigor and consistency across all supported programs. The implementation of DOE Standard 1098-99 Radiological Control can be used as a tool to establish this consistency across LLNL. The establishment of a site wide ALARA Committee and administrative control levels would focus attention on improved processes. Currently LLNL issues dosimeters to a large number of employees and visitors that do not enter areas requiring dosimetry. This includes 25,000 visitor TLDs per year. Dosimeters should be issued to only those personnel who enter areas where dosimetry is required.« less

Patient safety culture in obstetrics and gynecology and neonatology units: the nurses' and the midwives' opinion.

PubMed

Ribeliene, Janina; Blazeviciene, Aurelija; Nadisauskiene, Ruta Jolanta; Tameliene, Rasa; Kudreviciene, Ausrele; Nedzelskiene, Irena; Macijauskiene, Jurate

2018-04-22

Patients treated in health care facilities that provide services in the fields of obstetrics, gynecology, and neonatology are especially vulnerable. Large multidisciplinary teams of physicians, multiple invasive and noninvasive diagnostic and therapeutic procedures, and the use of advanced technologies increase the probability of adverse events. The evaluation of knowledge about patient safety culture among nurses and midwives working in such units and the identification of critical areas at a health care institution would reduce the number of adverse events and improve patient safety. The aim of the study was to evaluate the opinion of nurses and midwives working in clinical departments that provide services in the fields of obstetrics, gynecology, and neonatology about patient safety culture and to explore potential predictors for the overall perception of safety. We used the Hospital Survey on Patient Safety Culture (HSOPSC) to evaluate nurses' and midwives' opinion about patient safety issues. The overall response rate in the survey was 100% (n = 233). The analysis of the dimensions of safety on the unit level showed that the respondents' most positive evaluations were in the Organizational Learning - Continuous Improvement (73.2%) and Feedback and Communication about Error (66.8%) dimensions, and the most negative evaluations in the Non-punitive Response to Error (33.5%) and Staffing (44.6%) dimensions. On the hospital level, the evaluation of the safety dimensions ranged between 41.4 and 56.8%. The percentage of positive responses in the outcome dimensions Frequency of Events Reported was 82.4%. We found a significant association between the outcome dimension Frequency of Events Reported and the Hospital Management Support for Patient Safety and Feedback and Communication about Error Dimensions. On the hospital level, the critical domains in health care facilities that provide services in the fields of obstetrics, gynecology, and neonatology were Teamwork Across Hospital Units, and on the unit level - Communication Openness, Teamwork Within Units, Non-punitive Response to Error, and Staffing. The remaining domains were seen as having a potential for improvement.

Comparison of an Electronic Glycemic Management System Versus Provider-Managed Subcutaneous Basal Bolus Insulin Therapy in the Hospital Setting.

PubMed

Aloi, Joseph; Bode, Bruce W; Ullal, Jagdeesh; Chidester, Paul; McFarland, Raymie S; Bedingfield, Amy E; Mabrey, Melanie; Booth, Robby; Mumpower, April; Wallia, Amisha

2017-01-01

American Diabetes Association (ADA) guidelines recommend a basal bolus correction insulin regimen as the preferred method of treatment for non-critically ill hospitalized patients. However, achieving ADA glucose targets safely, without hypoglycemia, is challenging. In this study we evaluated the safety and efficacy of basal bolus subcutaneous (SubQ) insulin therapy managed by providers compared to a nurse-directed Electronic Glycemic Management System (eGMS). This retrospective crossover study evaluated 993 non-ICU patients treated with subcutaneous basal bolus insulin therapy managed by a provider compared to an eGMS. Analysis compared therapy outcomes before Glucommander (BGM), during Glucommander (DGM), and after Glucommander (AGM) for all patients. The blood glucose (BG) target was set at 140-180 mg/dL for all groups. The safety of each was evaluated by the following: (1) BG averages, (2) hypoglycemic events <40 and <70 mg/dL, and (3) percentage of BG in target. Percentage of BG in target was BGM 47%, DGM 62%, and AGM 36%. Patients' BGM BG average was 195 mg/dL, DGM BG average was 169 mg/dL, and AGM BG average was 174 mg/dL. Percentage of hypoglycemic events <70 mg/dL was 2.6% BGM, 1.9% DGM, and 2.8% AGM treatment. Patients using eGMS in the DGM group achieved improved glycemic control with lower incidence of hypoglycemia (<40 mg/dL and <70 mg/dl) compared to both BGM and AGM management with standard treatment. These results suggest that an eGMS can safely maintain glucose control with less hypoglycemia than basal bolus treatment managed by a provider.

Achievements and Perspectives of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Louvat, D.; Lacoste, A.C.

The Joint Convention on the Safety of Spent Fuel management and on the Safety of Radioactive Waste Management is the first legal instrument to directly address the safety of spent fuel and radioactive waste management on a global scale. The Joint Convention entered into force in 2001. This paper describes its process and its main achievements to date. The perspectives to establish of a Global Waste Safety Regime based on the Joint Convention are also discussed. (authors)

A study for safety and health management problem of semiconductor industry in Taiwan.

PubMed

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

Environment, Health, and Safety | NREL

Science.gov Websites

property, and the environment. View the Environmental Stewardship, Health, Safety, and Quality Management (OHSAS) 18001 certification demonstrates NREL's commitment to a health and safety management system that into all activities. NREL's staff and management are committed to managing health and safety risk

National Safety Council

MedlinePlus

... Safety Management Systems Workplace Safety Consulting Employee Perception Surveys Research Journey to Safety Excellence Join the Journey What ... Safety Management Systems Workplace Safety Consulting Employee Perception Surveys Research Journey to Safety Excellence Join the Journey What ...

The disparity of frontline clinical staff and managers' perceptions of a quality and patient safety initiative.

PubMed

Parand, Anam; Burnett, Susan; Benn, Jonathan; Pinto, Anna; Iskander, Sandra; Vincent, Charles

2011-12-01

Arguably, a shared perspective between managers and their clinical staff on an improvement initiative would allow for most effective implementation and increase programme success. However, it has been reported that research has failed to differentiate between managers and line employees on quality management implementation and examine their differences in perceptions of quality and safety initiatives. The aim of this study was to compare clinical frontline staff and senior managers' perceptions on the importance of an organization-wide quality and safety collaborative: the Safer Patients Initiative (SPI). A quantitative study obtained 635 surveys at 20 trusts participating in SPI. Participants included the teams and frontline staff involved within the programme at each organization. Independent T-tests were carried out between frontline staff and senior managers' perceptions of SPI programme elements, success factors and impact & sustainability. Statistically significant differences were found between the perceptions of frontline staff and senior managers on a wide number of issues, including the frontline perceiving a significantly larger improvement on the timeliness of care delivery (t = 2.943, P = 0.004), while managers perceived larger improvement on the culture within the organization for safe, effective and reliable care (t = -2.454, P = 0.014). This study has identified statistically significant disparities in perceptions of an organization-wide improvement initiative between frontline staff and senior managers. This holds valuable implications for the importance of getting both frontline and management perspectives when designing such interventions, in monitoring their performance, and in evaluating their impact. © 2010 Blackwell Publishing Ltd.

Findings From the National Machine Guarding Program

PubMed Central

Parker, David L.; Yamin, Samuel; Xi, Min; Gordon, Robert; Most, Ivan; Stanley, Rod

2017-01-01

Objectives: This manuscript assesses safety climate data from the National Machine Guarding Program (NMGP)—a nationwide intervention to improve machine safety. Methods: Baseline safety climate surveys were completed by 2161 employees and 341 owners or managers at 115 businesses. A separate onsite audit of safety management practices and machine guarding equipment was conducted at each business. Results: Safety climate measures were not correlated with machine guarding or safety management practices. The presence of a safety committee was correlated with higher scores on the safety management audit when contrasted with those without one. Conclusions: The presence of a safety committee is easily assessed and provides a basis on which to make recommendations with regard to how it functions. Measures of safety climate fail to provide actionable information. Future research on small manufacturing firms should emphasize the presence of an employee-management safety committee. PMID:28930801

The effects of Crew Resource Mangement (CRM) training in airline maintenance: Results following three years' experience

NASA Technical Reports Server (NTRS)

Taylor, J. C.; Robertson, M. M.

1995-01-01

This report describes three years' evaluation of the effects of one airline's Crew Resources Management (CRM) training operation for maintenance. This evaluation focuses on the post-training attitudes of maintenance managers' and technical support professionals, their reported behaviors, and the safety, efficiency and dependable maintenance performance of their units. The results reveal a strong positive effect of the training. The overall program represents the use of CRM training as a long-term commitment to improving performance through effective communication at all levels in airline maintenance operations. The initial findings described in our previous progress reports are reinforced and elaborated here. The current results benefit from the entire pre-post training survey, which now represents total attendance of all managers and staff professionals. Additionally there are now full results from the two-month, six-month, and 12-month follow-up questionnaires, together with as many as 33 months of post-training performance data, using several indicators. In this present report, we examine participants' attitudes, their reported behaviors following the training, the performance of their work units, and the relationships among these variables. Attitudes include those measured immediately before and after the training as well as participants' attitudes months after their training. Performance includes measures, by work units, of on-time flight departures, on-schedule maintenance releases, occupational and aircraft safety, and efficient labor costs. We report changes in these performance measures following training, as well their relationships with the training participants' attitudes. Highlights of results from this training program include increased safety and improved costs associated with positive attitudes about the use of more assertive communication, and the improved management of stress. Improved on-time performance is also related to those improved attitudes, as well as favorable attitudes about participative management.

Overcoming barriers to ITS : lessons from other technologies : final report

DOT National Transportation Integrated Search

1999-12-08

The purpose of this study was to (1) identify from direct interaction with motorcoach owners, safety directors, operations managers, and drivers those fatigue-inducing stresses which they believe are unique to the motorcoach industry; (2) evaluate th...

Benefit-cost evaluation of a highway-railroad intermodal control system (ICS)

DOT National Transportation Integrated Search

2004-06-01

Improved train location information and vehicle detection combined with grade crossing controls, traveler information, and traffic management can improve safety and reduce delay for both passengers and vehicles. In addition, the possibility of pre-em...

Evaluation of Work Zone Speed Reduction Measures

DOT National Transportation Integrated Search

2000-04-01

The Iowa Department of Transportation (DOT) has made improving work zone (WZ) safety a high priority. Managing vehicle speeds through work zones is perceived to be an important factor in achieving this goal. A number of speed reduction techniques are...

Topical Backgrounder: How Safe Am I? Helping Communities Evaluate Chemical Risks

EPA Pesticide Factsheets

Part of the May 1999 Guides to Environmental Risk Management Series created by the National Safety Council. Explains how RMPs will help prevent emergency chemical releases, reduce risk from exposure to hazards, and minimize consequences.

The role of the ward manager in promoting patient safety.

PubMed

Pinnock, David

In this article the role of the ward manager in promoting patient safety is explored. The background to the development of the patient safety agenda is briefly discussed and the relationship between quality and safety is illustrated. The pivotal importance of the role of the ward manager in delivering services to patients is underlined and literature on patient safety is examined to identify what a ward manager can do to make care safer. Possible actions of the ward manager to improve safety discussed in the literature are structured around the Leadership Framework. This framework identifies seven domains for the leadership of service delivery. Ward managers use their personal qualities, and network and work within teams, while managing performance and facilitating innovation, change and measurement for improvement. The challenge of promoting patient safety for ward managers is briefly explored and recommendations for further research are made.

Safety intelligence: an exploration of senior managers' characteristics.

PubMed

Fruhen, L S; Mearns, K J; Flin, R; Kirwan, B

2014-07-01

Senior managers can have a strong influence on organisational safety. But little is known about which of their personal attributes support their impact on safety. In this paper, we introduce the concept of 'safety intelligence' as related to senior managers' ability to develop and enact safety policies and explore possible characteristics related to it in two studies. Study 1 (N = 76) involved direct reports to chief executive officers (CEOs) of European air traffic management (ATM) organisations, who completed a short questionnaire asking about characteristics and behaviours that are ideal for a CEO's influence on safety. Study 2 involved senior ATM managers (N = 9) in various positions in interviews concerning their day-to-day work on safety. Both studies indicated six attributes of senior managers as relevant for their safety intelligence, particularly, social competence and safety knowledge, followed by motivation, problem-solving, personality and interpersonal leadership skills. These results have recently been applied in guidance for safety management practices in a White Paper published by EUROCONTROL. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Legislation and inspection for the health and safety of workers. Efficacy and limits].

PubMed

Tozzi, G A

2009-01-01

To provide information regarding Occupational Health and Safety (OHS) Inspections in Europe. The dynamics that are transforming regulatory subsystems and complementary inspection services are described. Simplification initiatives, the limits and difficulties of applying the different models of Health and Safety Management Systems are discussed. Examples are given on how to evaluate legislation and technical standards during planning and enforcement. Different approaches for studying characteristics, methodologies and efficacy in practice of OHS Inspection are provided. Targeted inspections need to respond to the needs of enterprises and workers. Impartiality must be guaranteed and workers' participation should be facilitated.

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

PubMed

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Simulation-Based Testing of Pager Interruptions During Laparoscopic Cholecystectomy.

PubMed

Sujka, Joseph A; Safcsak, Karen; Bhullar, Indermeet S; Havron, William S

2018-01-30

To determine if pager interruptions affect operative time, safety, or complications and management of pager issues during a simulated laparoscopic cholecystectomy. Twelve surgery resident volunteers were tested on a Simbionix Lap Mentor II simulator. Each resident performed 6 randomized simulated laparoscopic cholecystectomies; 3 with pager interruptions (INT) and 3 without pager interruptions (NO-INT). The pager interruptions were sent in the form of standardized patient vignettes and timed to distract the resident during dissection of the critical view of safety and clipping of the cystic duct. The residents were graded on a pass/fail scale for eliciting appropriate patient history and management of the pager issue. Data was extracted from the simulator for the following endpoints: operative time, safety metrics, and incidence of operative complications. The Mann-Whitney U test and contingency table analysis were used to compare the 2 groups (INT vs. NO-INT). Level I trauma center; Simulation laboratory. Twelve general surgery residents. There was no significant difference between the 2 groups in any of the operative endpoints as measured by the simulator. However, in the INT group, only 25% of the time did the surgery residents both adequately address the issue and provide effective patient management in response to the pager interruption. Pager interruptions did not affect operative time, safety, or complications during the simulated procedure. However, there were significant failures in the appropriate evaluations and management of pager issues. Consideration for diversion of patient care issues to fellow residents not operating to improve quality and safety of patient care outside the operating room requires further study. Copyright © 2018. Published by Elsevier Inc.

Report to the administrator by the NASA Aerospace Safety Advisory Panel on the Skylab program. Volume 1: Summary report. [systems management evaluation and design analysis

NASA Technical Reports Server (NTRS)

1973-01-01

Contractor and NASA technical management for the development and manufacture of the Skylab modules is reviewed with emphasis on the following management controls: configuration and interface management; vendor control; and quality control of workmanship. A review of the modified two-stage Saturn V launch vehicle which focused on modifications to accommodate the Skylab payload; resolution of prior flight anomalies; and changes in personnel and management systems is presented along with an evaluation of the possible age-life and storage problems for the Saturn 1-B launch vehicle. The NASA program management's visibility and control of contractor operations, systems engineering and integration, the review process for the evaluation of design and flight hardware, and the planning process for mission operations are investigated. It is concluded that the technical management system for development and fabrication of the modules, spacecraft, and launch vehicles, the process of design and hardware acceptance reviews, and the risk assessment activities are satisfactory. It is indicated that checkout activity, integrated testing, and preparations for and execution of mission operation require management attention.

Workplace safety and health improvements through a labor/management training and collaboration.

PubMed

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2013-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by "OSHA-authorized" members of the International Chemical Workers Union Council who worked at the plant. Merck created a new full-time position in its Learning and Development Department and filled it with one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred.

Workplace Safety and Health Improvements Through a Labor/Management Training and Collaboration

PubMed Central

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2014-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by “OSHA-authorized” members of the International Chemical Workers Union Council who worked at the plant. Merck created a new fulltime position in its Learning and Development Department and hired one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred. PMID:24704812

An observational analysis of surgical team compliance with perioperative safety practices after crew resource management training.

PubMed

France, Daniel J; Leming-Lee, Susie; Jackson, Tom; Feistritzer, Nancye R; Higgins, Michael S

2008-04-01

Acknowledging the need to improve team communication and coordination among health care providers, health care administrators and improvement officers have been quick to endorse and invest in aviation crew resource management (CRM). Despite the increased interest in CRM there exists limited data on the effectiveness of CRM to change team behavior and performance in clinical settings. Direct observational analyses were performed on 30 surgical teams (15 neurosurgery cases and 15 cardiac cases) to evaluate surgical team compliance with integrated safety and CRM practices after extensive CRM training. Observed surgical teams were compliant with only 60% of the CRM and perioperative safety practices emphasized in the training program. The results highlight many of the challenges the health care industry faces in its efforts to adapt CRM from aviation to medicine. Additional research is needed to develop and test new team training methods and performance feedback mechanisms for clinical teams.

Tools for Successful Weight Management in Primary Care

PubMed Central

Turer, Christy Boling

2015-01-01

Obesity is one of the most pervasive and costly public-health problems. Clinicians need effective tools to address weight management in primary care, including evaluation and communication methods, guideline-based weight-management interventions, and safe and effective weight-loss medications and surgery. The objective of this Grand-Rounds presentation is to provide practicing clinicians with the latest information regarding effective ways to care for and communicate with patients about weight loss; evidence-based guidelines for selecting weight-management therapies; and safety, efficacy, and adverse effects of weight-loss medications and surgery. PMID:26218666

Perceived safety climate, job demands, and coworker support among union and nonunion injured construction workers.

PubMed

Gillen, Marion; Baltz, Davis; Gassel, Margy; Kirsch, Luz; Vaccaro, Diane

2002-01-01

This study evaluated injured construction workers' perceptions of workplace safety climate, psychological job demands, decision latitude, and coworker support, and the relationship of these variables to the injury severity sustained by the workers. Injury severity was assessed using the Health Assessment Questionnaire (HAQ), which evaluates functional limitations. Worker perceptions of workplace variables were determined by two instruments: (a) the Safety Climate Measure for Construction Sites and (b) the Job Content Questionnaire (JCQ). The overall model explained 23% of the variance in injury severity, with unique contributions provided by union status, the Safety Climate Score, and Psychological Job Demands. A positive significant correlation was found between injury severity and the Safety Climate Scores (r = .183, P = .003), and between the Safety Climate Scores and union status (r = .225, P < .001). There were statistically significant differences between union and nonunion workers' responses regarding perceived safety climate on 5 of the 10 safety climate items. Union workers were more likely than nonunion workers to: (a) perceive their supervisors as caring about their safety; (b) be made aware of dangerous work practices; (c) have received safety instructions when hired; (d) have regular job safety meetings; and (e) perceive that taking risks was not a part of their job. However, with regard to the 49-item JCQ, which includes Coworker Support, the responses between union and nonunion workers were very similar, indicating an overall high degree of job satisfaction. However, workers who experienced their workplace as more safe also perceived the level of management (r = -.55, P < .001) and coworker (r = -.31, P < .001) support as being higher. The findings of this study underscore the critical need for construction managers to alert workers to dangerous work practices and conditions more frequently, and express concern and praise workers for safe work in a manner that is culturally acceptable in this industry. Workplace interventions that decrease the incidence and severity of injuries, but that are flexible enough to meet a variety of potentially competing imperatives, such as production deadlines and client demands, need to be identified.

[Qualitative evaluation of employer requirements associated with occupational health and safety as good practice in small-scale enterprises].

PubMed

Kuroki, Naomi; Miyashita, Nana; Hino, Yoshiyuki; Kayashima, Kotaro; Fujino, Yoshihisa; Takada, Mikio; Nagata, Tomohisa; Yamataki, Hajime; Sakuragi, Sonoko; Kan, Hirohiko; Morita, Tetsuya; Ito, Akiyoshi; Mori, Koji

2009-09-01

The purpose of this study was to identify what motivates employers to promote good occupational health and safety practices in small-scale enterprises. Previous studies have shown that small-scale enterprises generally pay insufficient attention to issues of occupational health and safety. These findings were mainly derived from questionnaire based surveys. Nevertheless, some small-scale enterprises in which employers exercise good leadership do take a progressive approach to occupational health and safety. Although good practices can be identified in small-scale enterprises, it remains unclear what motivates employers in small-scale enterprises to actively implement occupational health and safety practices. We speculated that identifying employer motivations in promoting occupational health would help to spread good practices among small-scale enterprises. Using a qualitative approach based on the KJ methods, we interviewed ten employers who actively promote occupational health and safety in the workplace. The employers were asked to discuss their views of occupational health and safety in their own words. A semi-structured interview format was used, and transcripts were made of the interviews. Each transcript was independently coded by two or more researchers. These transcripts and codes were integrated and then the research group members discussed the heading titles and structural relationships between them according to the KJ method. Qualitative analysis revealed that all the employers expressed a strong interest in a "good company" and "good management". They emphasized four elements of "good management", namely "securing human resources", "trust of business partners", "social responsibility" and "employer's health condition itself", and considered that addressing occupational health and safety was essential to the achievement of these four elements. Consistent with previous findings, the results showed that implementation of occupational health and safety activities depended on "cost", "human resources", "time to perform", and "advisory organization". These results suggest that employer awareness of the relationship between good management and occupational health is essential to the implementation of occupational health and safety practices in small-scale enterprises.

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Safety management system document and data maintenance (1) Procedures which establish and maintain control of all documents and data relevant to the safety management system. (2) Documents are available at... safety management system have? 96.250 Section 96.250 Navigation and Navigable Waters COAST GUARD...

33 CFR 96.240 - What functional requirements must a safety management system meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... a safety management system meet? 96.240 Section 96.240 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.240 What functional...

33 CFR 96.230 - What objectives must a safety management system meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... management system meet? 96.230 Section 96.230 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.230 What objectives must a safety...

76 FR 14592 - Safety Management System; Withdrawal

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

...-06A] RIN 2120-AJ15 Safety Management System; Withdrawal AGENCY: Federal Aviation Administration (FAA... (``product/ service providers'') to develop a Safety Management System (SMS). The FAA is withdrawing the... management with a set of robust decision-making tools to use to improve safety. The FAA received 89 comments...

77 FR 75176 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug... being rescheduled due to the postponement of the October 29-30, 2012, Drug Safety and Risk Management... Committee: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide...

77 FR 65000 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-24

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... Use (ETASU) before CDER's Drug Safety and Risk Management Advisory Committee (DSaRM). The Agency plans...

78 FR 30929 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... (REMS) with elements to assure safe use (ETASU) before its Drug Safety and Risk Management Advisory...

The determinants of employee participation in occupational health and safety management.

PubMed

Masso, Märt

2015-01-01

This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.

Diabetes Care Management Teams Did Not Reduce Utilization When Compared With Traditional Care: A Randomized Cluster Trial.

PubMed

Kearns, Patrick

2017-10-01

PURPOSE: Health services research evaluates redesign models for primary care. Care management is one alternative. Evaluation includes resource utilization as a criterion. Compare the impact of care-manager teams on resource utilization. The comparison includes entire panes of patients and the subset of patients with diabetes. DESIGN: Randomized, prospective, cohort study comparing change in utilization rates between groups, pre- and post-intervention. METHODOLOGY: Ten primary care physician panels in a safety-net setting. Ten physicians were randomized to either a care-management approach (Group 1) or a traditional approach (Group 2). Care managers focused on diabetes and the cardiovascular cluster of diseases. Analysis compared rates of hospitalization, 30-day readmission, emergency room visits, and urgent care visits. Analysis compared baseline rates to annual rates after a yearlong run-in for entire panels and the subset of patients with diabetes. RESULTS: Resource utilization showed no statistically significant change between baseline and Year 3 (P=.79). Emergency room visits and hospital readmission increased for both groups (P=.90), while hospital admissions and urgent care visits decreased (P=.73). Similarly, utilization was not significantly different for patients with diabetes (P=.69). CONCLUSIONS: A care-management team approach failed to improve resource utilization rates by entire panels and the subset of diabetic patients compared to traditional care. This reinforces the need for further evidentiary support for the care-management model's hypothesis in the safety net.

The influence of environmental conditions on safety management in hospitals: a qualitative study.

PubMed

Alingh, Carien W; van Wijngaarden, Jeroen D H; Huijsman, Robbert; Paauwe, Jaap

2018-05-02

Hospitals are confronted with increasing safety demands from a diverse set of stakeholders, including governmental organisations, professional associations, health insurance companies, patient associations and the media. However, little is known about the effects of these institutional and competitive pressures on hospital safety management. Previous research has shown that organisations generally shape their safety management approach along the lines of control- or commitment-based management. Using a heuristic framework, based on the contextually-based human resource theory, we analysed how environmental pressures affect the safety management approach used by hospitals. A qualitative study was conducted into hospital care in the Netherlands. Five hospitals were selected for participation, based on organisational characteristics as well as variation in their reputation for patient safety. We interviewed hospital managers and staff with a central role in safety management. A total of 43 semi-structured interviews were conducted with 48 respondents. The heuristic framework was used as an initial model for analysing the data, though new codes emerged from the data as well. In order to ensure safe care delivery, institutional and competitive stakeholders often impose detailed safety requirements, strong forces for compliance and growing demands for accountability. As a consequence, hospitals experience a decrease in the room to manoeuvre. Hence, organisations increasingly choose a control-based management approach to make sure that safety demands are met. In contrast, in case of more abstract safety demands and an organisational culture which favours patient safety, hospitals generally experience more leeway. This often results in a stronger focus on commitment-based management. Institutional and competitive conditions as well as strategic choices that hospitals make have resulted in various combinations of control- and commitment-based safety management. A balanced approach is required. A strong focus on control-based management generates extrinsic motivation in employees but may, at the same time, undermine or even diminish intrinsic motivation to work on patient safety. Emphasising commitment-based management may, in contrast, strengthen intrinsic motivation but increases the risk of priorities being set elsewhere. Currently, external pressures frequently lead to the adoption of control-based management. A balanced approach requires a shift towards more trust-based safety demands.

Research and guidelines for implementing Fatigue Risk Management Systems for the French regional airlines.

PubMed

Cabon, Philippe; Deharvengt, Stephane; Grau, Jean Yves; Maille, Nicolas; Berechet, Ion; Mollard, Régis

2012-03-01

This paper describes research that aims to provide the overall scientific basis for implementation of a Fatigue Risk Management System (FRMS) for French regional airlines. The current research has evaluated the use of different tools and indicators that would be relevant candidates for integration into the FRMS. For the Fatigue Risk Management component, results show that biomathematical models of fatigue are useful tools to help an airline to prevent fatigue related to roster design and for the management of aircrew planning. The Fatigue Safety assurance includes two monitoring processes that have been evaluated during this research: systematic monitoring and focused monitoring. Systematic monitoring consists of the analysis of existing safety indicators such as Air Safety Reports (ASR) and Flight Data Monitoring (FDM). Results show a significant relationship between the hours of work and the frequency of ASR. Results for the FDM analysis show that some events are significantly related to the fatigue risk associated with the hours of works. Focused monitoring includes a website survey and specific in-flight observations and data collection. Sleep and fatigue measurements have been collected from 115 aircrews over 12-day periods (including rest periods). Before morning duties, results show a significant sleep reduction of up to 40% of the aircrews' usual sleep needs leading to a clear increase of fatigue during flights. From these results, specific guidelines are developed to help the airlines to implement the FRMS and for the airworthiness to oversight the implementation of the FRMS process. Copyright © 2011 Elsevier Ltd. All rights reserved.

Cultural differences in dealing with critical incidents.

PubMed

Leonhardt, Jörg; Vogt, Joachim

2009-01-01

This article discusses the cultural aspects of High Reliability Organizations (HROs), such as air navigation services. HROs must maintain a highly professional safety culture and constantly be prepared to handle crises. The article begins with a general discussion of the concept of organizational culture. The special characteristics of HROs and their safety culture is then described. Finally the article illustrates how Critical Incident Stress Management (CISM) is becoming an ingrained feature of the organizational culture in air traffic control systems. Critical Incident Stress Management is a prevention program that can successfully guard against the negative effects of critical incidents. The CISM program of DFS (Deutsche Flugsicherung) was recently evaluated by the University of Copenhagen. This evaluation not only confirmed the successful prevention of negative effects at the operation's employee level (especially air traffic controllers), but also showed a sustained improvement of its safety culture and its overall organizational performance. The special aspects of cross-cultural crisis intervention and the challenges it faces, as well as the importance of prevention programs, such as CISM, are illustrated using the examples of two aircraft accidents: the crash landing of a calibration aircraft and the Lake Constance air disaster.

Associations between safety climate and safety management practices in the construction industry.

PubMed

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

[Concept analysis of a participatory approach to occupational safety and health].

PubMed

Yoshikawa, Etsuko

2013-01-01

The purpose of this study was to analyze a participatory approach to occupational safety and health, and to examine the possibility of applying the concept to the practice and research of occupational safety and health. According to Rodger's method, descriptive data concerning antecedents, attributes and consequences were qualitatively analyzed. A total of 39 articles were selected for analysis. Attributes with a participatory approach were: "active involvement of both workers and employers", "focusing on action-oriented low-cost and multiple area improvements based on good practices", "the process of emphasis on consensus building", and "utilization of a local network". Antecedents of the participatory approach were classified as: "existing risks at the workplace", "difficulty of occupational safety and health activities", "characteristics of the workplace and workers", and "needs for the workplace". The derived consequences were: "promoting occupational safety and health activities", "emphasis of self-management", "creation of safety and healthy workplace", and "contributing to promotion of quality of life and productivity". A participatory approach in occupational safety and health is defined as, the process of emphasis on consensus building to promote occupational safety and health activities with emphasis on self-management, which focuses on action-oriented low-cost and multiple area improvements based on good practices with active involvement of both workers and employers through utilization of local networks. We recommend that the role of the occupational health professional be clarified and an evaluation framework be established for the participatory approach to promote occupational safety and health activities by involving both workers and employers.

Decreasing Malpractice Claims by Reducing Preventable Perinatal Harm.

PubMed

Riley, William; Meredith, Les W; Price, Rebecca; Miller, Kristi K; Begun, James W; McCullough, Mac; Davis, Stanley

2016-12-01

To evaluate the association of improved patient safety practices with medical malpractice claims and costs in the perinatal units of acute care hospitals. Malpractice and harm data from participating hospitals; litigation records and medical malpractice claims data from American Excess Insurance Exchange, RRG, whose data are managed by Premier Insurance Management Services, Inc. (owned by Premier Inc., a health care improvement company). A quasi-experimental prospective design to compare baseline and postintervention data. Statistical significance tests for differences were performed using chi-square, Wilcoxon signed-rank test, and t-test. Claims data were collected and evaluated by experienced senior claims managers through on-site claim audits to evaluate claim frequency, severity, and financial information. Data were provided to the analyzing institution through confidentiality contracts. There is a significant reduction in the number of perinatal malpractice claims paid, losses paid, and indemnity payments (43.9 percent, 77.6 percent, and 84.6 percent, respectively) following interventions to improve perinatal patient safety and reduce perinatal harm. This compares with no significant reductions in the nonperinatal claims in the same hospitals during the same time period. The number of perinatal malpractice claims and dollar amount of claims payments decreased significantly in the participating hospitals, while there was no significant decrease in nonperinatal malpractice claims activity in the same hospitals. © Health Research and Educational Trust.

Selected Issues in DoD’s Radio Frequency Identification (RFID) Implementation

DTIC Science & Technology

2006-04-01

Evaluation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic...standard for human exposure to RF Signal, 3 kHz-300 GHz BS EN 50364 Limitation of human exposure to electromagnetic fields from devices operating in the...Management and DoD Explosives Safety Board, and DoDD 6055.9-STD, DoD Ammunition and Explosives Safety Standards. Exposure of people to electromagnetic

Project UCARE : Uniform Commuter Assistance Reporting and Evaluation for transportation demand management programs, [summary].

DOT National Transportation Integrated Search

2013-09-01

The federal transportation reauthorization called : Moving Ahead for Progress in the 21st Century Act : (MAP-21) creates a program that addresses many : challenges facing the U.S. transportation system. : These challenges include improving safety, : ...

49 CFR 192.937 - What is a continual process of evaluation and assessment to maintain a pipeline's integrity?

Code of Federal Regulations, 2012 CFR

2012-10-01

...: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.937 What is a..., or stress corrosion cracking. An operator must conduct the direct assessment in accordance with the...

49 CFR 192.937 - What is a continual process of evaluation and assessment to maintain a pipeline's integrity?

Code of Federal Regulations, 2011 CFR

2011-10-01

...: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.937 What is a..., or stress corrosion cracking. An operator must conduct the direct assessment in accordance with the...

49 CFR 192.937 - What is a continual process of evaluation and assessment to maintain a pipeline's integrity?

Code of Federal Regulations, 2013 CFR

2013-10-01

...: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.937 What is a..., or stress corrosion cracking. An operator must conduct the direct assessment in accordance with the...

49 CFR 192.937 - What is a continual process of evaluation and assessment to maintain a pipeline's integrity?

Code of Federal Regulations, 2014 CFR

2014-10-01

...: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.937 What is a..., or stress corrosion cracking. An operator must conduct the direct assessment in accordance with the...

Los Angeles congestion reduction demonstration (Metro ExpressLanes) program. National evaluation : safety data test plan.

DOT National Transportation Integrated Search

1999-07-01

This document presents human factors guidelines for designers, owners operators, and planners involved in the development and operation of traffic management centers. Dimensions of the work environment affecting operator and system performance are ad...

NASA Range Safety Annual Report 2007

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2007-01-01

As always, Range Safety has been involved in a number of exciting and challenging activities and events. Throughout the year, we have strived to meet our goal of protecting the public, the workforce, and property during range operations. During the past year, Range Safety was involved in the development, implementation, and support of range safety policy. Range Safety training curriculum development was completed this year and several courses were presented. Tailoring exercises concerning the Constellation Program were undertaken with representatives from the Constellation Program, the 45th Space Wing, and the Launch Constellation Range Safety Panel. Range Safety actively supported the Range Commanders Council and it subgroups and remained involved in updating policy related to flight safety systems and flight safety analysis. In addition, Range Safety supported the Space Shuttle Range Safety Panel and addressed policy concerning unmanned aircraft systems. Launch operations at Kennedy Space Center, the Eastern and Western ranges, Dryden Flight Research Center, and Wallops Flight Facility were addressed. Range Safety was also involved in the evaluation of a number of research and development efforts, including the space-based range (formerly STARS), the autonomous flight safety system, the enhanced flight termination system, and the joint advanced range safety system. Flight safety system challenges were evaluated. Range Safety's role in the Space Florida Customer Assistance Service Program for the Eastern Range was covered along with our support for the Space Florida Educational Balloon Release Program. We hope you have found the web-based format both accessible and easy to use. Anyone having questions or wishing to have an article included in the 2008 Range Safety Annual Report should contact Alan Dumont, the NASA Range Safety Program Manager located at the Kennedy Space Center, or Michael Dook at NASA Headquarters.

Dams, Hydrology and Risk in Future River Management

NASA Astrophysics Data System (ADS)

Wegner, D. L.

2017-12-01

Across America there are over 80,000 large to medium dams and globally the number is in excess of 800,000. Currently there are over 1,400 dams and diversion structures being planned or under construction globally. In addition to these documented dams there are thousands of small dams populating watersheds. Governments, agencies, native tribes, private owners and regulators all have a common interest in safe dams. Often dam safety is characterized as reducing structural risk while providing for maximum operational flexibility. In the 1970's there were a number of large and small dam failures in the United States. These failures prompted the federal government to issue voluntary dam safety guidelines. These guidelines were based on historic information incorporated into a risk assessment process to analyze, evaluate and manage risk with the goal to improve the quality of and support of dam management and safety decisions. We conclude that historic and new risks need to be integrated into dam management to insure adequate safety and operational flexibility. A recent assessment of the future role of dams in the United States premises that future costs such as maintenance or removal beyond the economic design life have not been factored into the long-term operations or relicensing of dams. The converging risks associated with aging water storage infrastructure, multiple dams within watersheds and uncertainty in demands policy revisions and an updated strategic approach to dam safety. Decisions regarding the future of dams in the United States may, in turn, influence regional water planning and management. Leaders in Congress and in the states need to implement a comprehensive national water assessment and a formal analysis of the role dams play in our water future. A research and national policy agenda is proposed to assess future impacts and the design, operation, and management of watersheds and dams.

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

Criticality Safety Evaluations on the Use of 200-gram Pu Mass Limit for RHWM Waste Storage Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, P

This work establishes the criticality safety technical basis to increase the fissile mass limit from 120 grams to 200 grams for Type A 55-gallon drums and their equivalents. Current RHWM fissile mass limit is 120 grams Pu for Type A 55-gallon containers and their equivalent. In order to increase the Type A 55-gallon drum limit to 200 grams, a few additional criticality safety control requirements are needed on moderators, reflectors, and array controls to ensure that the 200-gram Pu drums remain criticality safe with inadvertent criticality remains incredible. The purpose of this work is to analyze the use of 200-grammore » Pu drum mass limit for waste storage operations in Radioactive and Hazardous Waste Management (RHWM) Facilities. In this evaluation, the criticality safety controls associated with the 200-gram Pu drums are established for the RHWM waste storage operations. With the implementation of these criticality safety controls, the 200-gram Pu waste drum storage operations are demonstrated to be criticality safe and meet the double-contingency-principle requirement per DOE O 420.1.« less

76 FR 12300 - Safety Management System for Certificated Airports; Extension of Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

...-0997; Notice No. 10-14] RIN 2120-AJ38 Safety Management System for Certificated Airports; Extension of...: Background On October 7, 2010, the FAA published Notice No. 10-14, entitled ``Safety Management System for... conclusions from the safety management systems proof of concept. The FAA anticipates making this report...

Health Monitoring and Evaluation of Long-Span Bridges Based on Sensing and Data Analysis: A Survey

PubMed Central

Zhou, Jianting; Li, Xiaogang; Xia, Runchuan; Yang, Jun; Zhang, Hong

2017-01-01

Aimed at the health monitoring and evaluation of bridges based on sensing technology, the monitoring contents of different structural types of long-span bridges were defined. Then, the definition, classification, selection principle, and installation requirements of the sensors were summarized. The concept was proposed that new adaptable long-life sensors could be developed by new theories and new effects. The principle and methods to select controlled sections and optimize the layout design of measuring points were illustrated. The functional requirements were elaborated on about the acquisition, transmission, processing, and management of sensing information. Some advanced concepts about the method of bridge safety evaluation were demonstrated and technology bottlenecks in the current safety evaluation were also put forward. Ultimately, combined with engineering practices, an application was carried out. The results showed that new, intelligent, and reliable sensor technology would be one of the main future development directions in the long-span bridge health monitoring and evaluation field. Also, it was imperative to optimize the design of the health monitoring system and realize its standardization. Moreover, it is a heavy responsibility to explore new thoughts and new concepts regarding practical bridge safety and evaluation technology. PMID:28300785

33 CFR 96.320 - What is involved to complete a safety management audit and when is it required to be completed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... up the safety management system. (c) Actions required during safety management audits for a company... management system, as defined in subpart B of this part. (2) Make sure the audit complies with this subpart... safety management system is found during an audit, it must be reported in writing by the auditor: (1) For...

Improving the governance of patient safety in emergency care: a systematic review of interventions

PubMed Central

Hesselink, Gijs; Berben, Sivera; Beune, Thimpe

2016-01-01

Objectives To systematically review interventions that aim to improve the governance of patient safety within emergency care on effectiveness, reliability, validity and feasibility. Design A systematic review of the literature. Methods PubMed, EMBASE, Cumulative Index to Nursing and Allied Health Literature, the Cochrane Database of Systematic Reviews and PsychInfo were searched for studies published between January 1990 and July 2014. We included studies evaluating interventions relevant for higher management to oversee and manage patient safety, in prehospital emergency medical service (EMS) organisations and hospital-based emergency departments (EDs). Two reviewers independently selected candidate studies, extracted data and assessed study quality. Studies were categorised according to study quality, setting, sample, intervention characteristics and findings. Results Of the 18 included studies, 13 (72%) were non-experimental. Nine studies (50%) reported data on the reliability and/or validity of the intervention. Eight studies (44%) reported on the feasibility of the intervention. Only 4 studies (22%) reported statistically significant effects. The use of a simulation-based training programme and well-designed incident reporting systems led to a statistically significant improvement of safety knowledge and attitudes by ED staff and an increase of incident reports within EDs, respectively. Conclusions Characteristics of the interventions included in this review (eg, anonymous incident reporting and validation of incident reports by an independent party) could provide useful input for the design of an effective tool to govern patient safety in EMS organisations and EDs. However, executives cannot rely on a robust set of evidence-based and feasible tools to govern patient safety within their emergency care organisation and in the chain of emergency care. Established strategies from other high-risk sectors need to be evaluated in emergency care settings, using an experimental design with valid outcome measures to strengthen the evidence base. PMID:26826151

Health, safety and environmental unit performance assessment model under uncertainty (case study: steel industry).

PubMed

Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh

2017-01-01

Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.

Predicting safety culture: the roles of employer, operations manager and safety professional.

PubMed

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Echocardiography-based hemodynamic management of left ventricular diastolic dysfunction: a feasibility and safety study.

PubMed

Shillcutt, Sasha K; Montzingo, Candice R; Agrawal, Ankit; Khaleel, Maseeha S; Therrien, Stacey L; Thomas, Walker R; Porter, Thomas R; Brakke, Tara R

2014-11-01

Patients with left ventricular diastolic dysfunction (LVDD) are at increased risk of postoperative adverse events. The primary aim of this study was to evaluate the safety and feasibility of using echocardiography-guided hemodynamic management (EGHEM) during surgery in subjects with LVDD compared to conventional management. The feasibility of using echocardiography to direct a treatment algorithm and clinical outcomes were compared for safety between groups. Subjects were screened for LVDD by preoperative transthoracic echocardiography (TTE) and randomized to the conventional or EGHEM group. Subjects in EGHEM received hemodynamic management based on left ventricular filling patterns on transesophageal echocardiography (TEE). Primary outcomes measured were the feasibility to obtain TEE images and follow a TEE-based treatment algorithm. Safety outcomes also compared the following clinical differences between groups: length of hospitalization, incidence of atrial fibrillation, congestive heart failure (CHF), myocardial infarction, cerebrovascular accident, transient ischemic attack and renal failure measured 30 days postoperatively. Population consisted of 28 surgical subjects (14 in conventional group and 14 in EGHEM group). Mean subject age was 73.4 ± 6.7 years (36% male) in conventional group and 65.9 ± 14.4 years (36% male) in EGHEM group. Procedures included orthopedic (conventional = 29%, EGHEM 36%), general (conventional = 50%, EGHEM = 36%), vascular (conventional = 7%, EGHEM = 21%), and thoracic (conventional = 14%, EGHEM = 7%). There was no statistically significant difference in adverse clinical events between the 2 groups. The EGHEM group had less CHF, atrial fibrillation, and shorter length of stay. Echocardiography-guided hemodynamic management of patients with LVDD during surgery is feasible and may be a safe alternative to conventional management. © 2014, Wiley Periodicals, Inc.

Development of Incident Report Database for Organizational Learning

NASA Astrophysics Data System (ADS)

Otsuka, Yuichi; Abe, Tomotaka; Noguchi, Hiroshi; Makinouchi, Akifumi

The necessity of an incident reporting system has recently been increasing for hospitals. Japan Council for Quality Health Care (JCQHC) started operating a national incident reporting system to which domestic hospitals would report their incidents. However, the reporting system obtained an additional problem for the hospitals. They managed their own systems which collected reports by papers. The purposes of the reporting systems was to analyze considerable causes involved in incidents to improve the quality of patient safety management. On the contrary, the national reporting system aimed at collecting a statistical tendency of normal incidents. Simultaneously operating the two systems would be too much workload for safety managers. The load may have the managers rest only a short time for summarizing occurrences, not enough for analyzing their causes. However, to the authors' knowledge, there has not been an integrating policy of the two forms to adapt them to practical situations in patient safety management. The scope of this paper is to establish the integrated form in order to use in analyzing the causes of incidents as well as reporting for the national system. We have developed new data base system using XML + XSLT and Java Servlet. The developed system is composed of three computers; DB server , DB client and Data sending server. To investigate usability of the developed system, we conducted a monitoring test by real workers in reporting workplaces. The result of subjective evaluations by examinees was so preferable for the developed system. The results of usability test and the achievement of increasing the number of reports after the introduction can demonstrate the enough effectiveness of the developed system for supporting the activity of patient safety management.

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

PubMed

Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

2018-04-26

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines

PubMed Central

Zhou, Lu-jie; Cao, Qing-gui; Yu, Kai; Wang, Lin-lin; Wang, Hai-bin

2018-01-01

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines. PMID:29701715

Examining the Relationship between Safety Management System Implementation and Safety Culture in Collegiate Flight Schools

ERIC Educational Resources Information Center

Robertson, Mike Fuller

2017-01-01

Safety Management Systems (SMS) are becoming the industry standard for safety management throughout the aviation industry. As the Federal Aviation Administration (FAA) continues to mandate SMS for different segments, the assessment of an organization's safety culture becomes more important. An SMS can facilitate the development of a strong…

46 CFR 71.75-13 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Safety Management Certificate. 71.75-13 Section 71.75-13... CERTIFICATION Certificates Under the International Convention for Safety of Life at Sea, 1960 § 71.75-13 Safety... valid Safety Management Certificate and a copy of their company's valid Document of Compliance...

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

PubMed Central

Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33‐question safety management audit. Audits were completed during an interview with the business owner or manager. Results Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Conclusions Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. Am. J. Ind. Med. 58:1184–1193, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26345591

Certifying leaders? high-quality management practices and healthy organisations: an ISO-9000 based standardisation approach

PubMed Central

MONTANO, Diego

2016-01-01

The present study proposes a set of quality requirements to management practices by taking into account the empirical evidence on their potential effects on health, the systemic nature of social organisations, and the current conceptualisations of management functions within the framework of comprehensive quality management systems. Systematic reviews and meta-analyses focusing on the associations between leadership and/or supervision and health in occupational settings are evaluated, and the core elements of an ISO 9001 standardisation approach are presented. Six major occupational health requirements to high-quality management practices are identified pertaining to communication processes, organisational justice, role clarity, decision making, social influence processes and management support. It is concluded that the quality of management practices may be improved by developing a quality management system of management practices that ensures not only conformity to product but also to occupational safety and health requirements. Further research may evaluate the practicability of the proposed approach. PMID:26860787

Certifying leaders? high-quality management practices and healthy organisations: an ISO-9000 based standardisation approach.

PubMed

Montano, Diego

2016-08-05

The present study proposes a set of quality requirements to management practices by taking into account the empirical evidence on their potential effects on health, the systemic nature of social organisations, and the current conceptualisations of management functions within the framework of comprehensive quality management systems. Systematic reviews and meta-analyses focusing on the associations between leadership and/or supervision and health in occupational settings are evaluated, and the core elements of an ISO 9001 standardisation approach are presented. Six major occupational health requirements to high-quality management practices are identified pertaining to communication processes, organisational justice, role clarity, decision making, social influence processes and management support. It is concluded that the quality of management practices may be improved by developing a quality management system of management practices that ensures not only conformity to product but also to occupational safety and health requirements. Further research may evaluate the practicability of the proposed approach.

Simulated ward round: reducing costs, not outcomes.

PubMed

Ford, Helen; Cleland, Jennifer; Thomas, Ian

2017-02-01

Distractions and interruptions on the ward pose substantial patient safety risks, but medical students receive little training on their management. Although there is some evidence that medical students can be taught how to manage distractions and interruptions in a simulated ward environment, the only model to date is based on individual feedback, which is resource-expensive, mitigating curricular integration. Our aim was to assess the educational utility of a cost-efficient approach to a patient safety-focused simulated ward round. Twenty-three of 55 final-year medical students took part in a cost-reduced simulated ward round. Costs were minimised by providing group rather than individualised feedback, thereby shortening the duration of each simulation and reducing the number of interruptions. The utility of the simulation was assessed via student evaluation and performance on a patient safety station of an objective structured clinical examination (OSCE). The direct costs of the simulation were more than 50 per cent lower per student compared with the original study, mostly as a result of a reduction in the time that faculty members took to give feedback. Students managed distractions better and received higher scores in the OSCE station than those who had not undergone the ward round. Group feedback was evaluated positively by most participants: 94 per cent of those who provided feedback agreed or strongly agreed that the simulation would make them a safer doctor and would improve their handling of distractions. Our aim was to assess the educational utility of a cost-efficient approach to a patient safety-focused simulated ward round DISCUSSION: The costs of a simulated ward round can be significantly reduced whilst maintaining educational utility. These findings should encourage medical schools to integrate ward simulation into curricula. © 2016 John Wiley & Sons Ltd.

Effective Safety Management in Construction Project

NASA Astrophysics Data System (ADS)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

Effective safety management is one of the serious problems in the construction industry worldwide, especially in large-scale construction projects. There have been significant reductions in the number and the rate of injury over the last 20 years. Nevertheless, construction remains as one of the high risk industry. The purpose of this study is to examine safety management in the Malaysian construction industry, as well as to highlight the importance of construction safety management. The industry has contributed significantly to the economic growth of the country. However, when construction safety management is not implemented systematically, accidents will happen and this can affect the economic growth of the country. This study put the safety management in construction project as one of the important elements to project performance and success. The study emphasize on awareness and the factors that lead to the safety cases in construction project.

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

PubMed

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries.

PubMed

McGonagle, Alyssa K; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive.

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries

PubMed Central

McGonagle, Alyssa K.; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive. PMID:27867448

75 FR 17417 - Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

...] Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory... Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory Committee. This meeting was... Drug Safety and Risk Management Advisory Committee would be held on May 12, 2010. On page 10490, in the...

SafetyAnalyst : software tools for safety management of specific highway sites

DOT National Transportation Integrated Search

2010-07-01

SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

Leadership for safety: industrial experience.

PubMed

Flin, R; Yule, S

2004-12-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters.

[The role of safety climate and the relationship with job satisfaction: an exploratory study across three different occupational contexts.

PubMed

Emanuel, Federica; Colombo, Lara; Cortese, Claudio G; Ghislieri, Chiara

2017-12-01

This study examined the role of the "safety climate", or the organization's attention to health and safety of workers, and of job demand and resources in relation with job satisfaction. Wellbeing at work is a topic of growing interest, in line with the legislation and the programs on health and safety of workers and management and the evaluation of psychosocial risks. Several studies show that organizational actions concerning health and safety can be an indicator of the attention to employees' wellbeing, even if studies about the relationship between safety climate and some psychosocial outcomes are scant. The study analysed the relationship between job demand, job resources, safety climate and job satisfaction in three different occupational contexts (public authority, N = 224; social care organization, N = 115; pharmaceutical company, N = 127); workers were divided into groups based on the risk level appeared in the objective assessment of work-related stress, in order to identify differences. The self-report questionnaire gathered information about: job satisfaction, work efforts, supervisors' support, colleagues support, safety climate (α between .72 and .93). Data analysis provided: Cronbach α, analysis of variance, correlations, stepwise multiple regressions. The results showed that job satisfaction (R2 between .23 and .88) had a negative relationship with efforts and a positive relationship with job resources and safety climate. It emerges the importance of safety climate: to support and promote wellbeing at work, organizations could endorse training and information programs on health and safety for all workers and management, not only for professional groups with high-risk level. Future studies could explore the relation between safety climate and other outcomes, such as emotional exhaustion or objective indicators of organizational health (e.g. absenteeism, accidents, etc.). Copyright© by Aracne Editrice, Roma, Italy.

A simulation-based approach to evaluate safety impacts of increased traffic signal density.

DOT National Transportation Integrated Search

2002-01-01

One of the most controversial access management techniques practitioners face is also one of the most common: restricting signal density. Increased signal density can improve access for minor approaches to a corridor; however, it can also increase de...

46 CFR 62.20-3 - Plans for information.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-based system hardware. (3) Safety controls. (4) Automated electric power management. (5) Automation... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Plan... Officer in Charge, Marine Inspection, for use in the evaluation of automated systems provided to replace...

Evaluation of the commercial vehicle information systems and networks (CVISN) model deployment initiative. Volume I, Final report

DOT National Transportation Integrated Search

2002-03-01

The Commercial Vehicle Information Systems and Networks Model Deployment Initiative (CVISN MDI) is funded by the Intelligent Transportation Systems Joint Program Office (ITS JPO) and managed by the Federal Motor Carrier Safety Administration (FMCSA),...

Evaluation of skid measurements used by TxDOT : technical report.

DOT National Transportation Integrated Search

2013-05-01

Accurate estimates of wet roadway friction are critical to the safety of the traveling public, project selection, and for managing the wet weather accident reduction program. Currently, Texas is the only state that uses a one-channel, torque-type whe...

Integrated corridor management initiative : demonstration phase evaluation, San Diego technical capability analysis test plan.

DOT National Transportation Integrated Search

1998-11-01

The purpose of this working paper is to present estimates of potential safety benefits resulting from full implementation of Intelligent Transportation Systems (ITS) in the United States. These estimates were derived by integrating results from a num...

46 CFR 175.540 - Equivalents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... safety management system is in place on board a vessel. The Commandant will consider the size and corporate structure of a vessel's company when determining the acceptability of an equivalent system... require engineering evaluations and tests to demonstrate the equivalence of the substitute. (b) The...

Evaluation of the commercial vehicle information systems and networks (CVISN) model deployment initiative. Volume II, Appendices

DOT National Transportation Integrated Search

2002-03-01

The Commercial Vehicle Information Systems and Networks Model Deployment Initiative (CVISN MDI) is funded by the Intelligent Transportation Systems Joint Program Office (ITS JPO) and managed by the Federal Motor Carrier Safety Administration (FMCSA),...

32 CFR 700.325 - The Assistant Secretary of the Navy (Installations and Environment).

Code of Federal Regulations, 2011 CFR

2011-07-01

... Secretary of the Navy (Installations and Environment) is responsible for: (a) Policy relating to Navy...) Development, implementation and evaluation of military construction, facilities management and engineering, strategic homeporting, housing, utilities, and base utilization issues; (c) Environmental policy, safety...

Intentions and knowledge shaping local safety policy: A comparison of two Swedish cities.

PubMed

Hanberger, Anders; Lundström, Ulf; Mårald, Gunilla

2015-12-01

This article explores how intentions and knowledge shape two Swedish cities' local safety policy (LSP). The applied framework is derived from the integration of governance and implementation research and the theory of knowledge and its use. The study shows that LSPs are shaped by a mix of intentions and different kinds of knowledge, and intentions and knowledge interplay and intertwine in many ways. Key-persons construct LSPs when they work out solutions to urgent safety problems and take departure in the local context, its pre-conditions, and their experience-based and professional knowledge. The state governs LSP softly through management by objectives in the background, but more often key-actor intentions and commitments, local safety problems, and events initiated and influenced LSPs. The article contributes to a better understanding of conditions for LSPs in multi-level governance. The article can be used to improve governance, identify implementation problems and knowledge needs that will improve LSPs and the overall safety situation in the community. The study has implications for how LSPs should be evaluated; many different evaluation criteria can be appropriate, such as relevance, legitimacy, achievement of key actors' objectives, sustainability of policy solutions, and creation of a local safety culture. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Semiannual Report to the Congress. April 1, 2010 - September 30, 2010

DTIC Science & Technology

2010-01-01

passes.” APRIL 1, 2010 TO SEPTEMBER 30, 2010 59 Services USAAA evaluated practices used to manage BlackBerry devices. personnel...practices used to manage cellular telephones and BlackBerry devices by activities at U.S. Army Training and Doctrine Command, U.S. Army Forces...some tanks. In addition, there were fire and safety hazards identified. For example, the Red Hill fuel tunnel complex lacked adequate fire

Study of Evaluation OSH Management System Policy Based On Safety Culture Dimensions in Construction Project

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Armyn Machfudiyanto, Rossy; Arifuddin, Rosmariani; Mahendra Fira Setiawan, R.; Yogiswara, Yoko

2017-07-01

Safety Culture in the construction industry is very influential on the socio economic conditions that resulted in the country’s competitiveness. Based on the data, the accident rate of construction projects in Indonesia is very high. In the era of the Asian Economic Community (AEC) Indonesian contractor is required to improve competitiveness, one of which is the implementation of the project without zero accident. Research using primary and secondary data validated the results of the literature experts and questionnaire respondents were analyzed using methods SmartPLS, obtained pattern of relationships between dimensions of safety culture to improve the performance of Safety. The results showed that the behaviors and Cost of Safety into dimensions that significantly affect the performance of safety. an increase in visible policy-based on Regulation of Public Work and Housing No 5/PRT/M/2014 to improve to lower the accident rate.

Leading clinical handover improvement: a change strategy to implement best practices in the acute care setting.

PubMed

Clarke, Christina M; Persaud, Drepaul David

2011-03-01

Many contemporary acute care facilities lack safe and effective clinical handover practices resulting in patient transitions that are vulnerable to discontinuities in care, medical errors, and adverse patient safety events. This article is intended to supplement existing handover improvement literature by providing practical guidance for leaders and managers who are seeking to improve the safety and the effectiveness of clinical handovers in the acute care setting. A 4-stage change model has been applied to guide the application of strategies for handover improvement. Change management and quality improvement principles, as well as concepts drawn from safety science and high-reliability organizations, were applied to inform strategies. A model for handover improvement respecting handover complexity is presented. Strategies targeted to stages of change include the following: 1. Enhancing awareness of handover problems and opportunities with the support of strategic directions, accountability, end user involvement, and problem complexity recognition. 2. Identifying solutions by applying and adapting best practices in local contexts. 3. Implementing locally adapted best practices supported by communication, documentation, and training. 4. Institutionalizing practice changes through integration, monitoring, and active dissemination. Finally, continued evaluation at every stage is essential. Although gaps in handover process and function knowledge remain, efforts to improve handover safety and effectiveness are still possible. Continued evaluation is critical in building this understanding and to ensure that practice changes lead to improvements in patient safety, organizational effectiveness, and patient and provider satisfaction. Through handover knowledge building, fundamental changes in handover policies and practices may be possible.

[Quality management and safety culture in medicine: context and concepts].

PubMed

Wischet, Werner; Eitzinger, Claudia

2009-01-01

The publication of the IOM report "To err is human: building a safer health system" in 1999 put spotlight on the primacy of the principle of primum non nocere and made patient safety a central topic of quality management. A key conclusion of the report was the need for a well-developed safety culture. While concepts of quality management have evolved along the lines of ISO and Total Quality Management over the last decades patient safety still has not got the same amount of attention (PubMed). Evidence from other safety-critical areas but also from the field of medicine itself suggests that an efficient culture of safety is a conditio sine qua non for the sustainable improvement of patient safety. Considering these arguments the present paper aims at emphasizing the importance of an efficient culture of safety for patient safety and quality management in healthcare. In addition, key instruments of safety culture as well as their limitations will be presented.

Integrating team resource management program into staff training improves staff's perception and patient safety in organ procurement and transplantation: the experience in a university-affiliated medical center in Taiwan.

PubMed

Hsu, Ya-Chi; Jerng, Jih-Shuin; Chang, Ching-Wen; Chen, Li-Chin; Hsieh, Ming-Yuan; Huang, Szu-Fen; Liu, Yueh-Ping; Hung, Kuan-Yu

2014-08-11

The process involved in organ procurement and transplantation is very complex that requires multidisciplinary coordination and teamwork. To prevent error during the processes, teamwork education and training might play an important role. We wished to evaluate the efficacy of implementing a Team Resource Management (TRM) program on patient safety and the behaviors of the team members involving in the process. We implemented a TRM training program for the organ procurement and transplantation team members of the National Taiwan University Hospital (NTUH), a teaching medical center in Taiwan. This 15-month intervention included TRM education and training courses for the healthcare workers, focused group skill training for the procurement and transplantation team members, video demonstration and training, and case reviews with feedbacks. Teamwork culture was evaluated and all procurement and transplantation cases were reviewed to evaluate the application of TRM skills during the actual processes. During the intervention period, a total of 34 staff members participated the program, and 67 cases of transplantations were performed. Teamwork framework concept was the most prominent dimension that showed improvement from the participants for training. The team members showed a variety of teamwork behaviors during the process of procurement and transplantation during the intervention period. Of note, there were two potential donors with a positive HIV result, for which the procurement processed was timely and successfully terminated by the team. None of the recipients was transplanted with an infected organ. No error in communication or patient identification was noted during review of the case records. Implementation of a Team Resource Management program improves the teamwork culture as well as patient safety in organ procurement and transplantation.

Integrating team resource management program into staff training improves staff’s perception and patient safety in organ procurement and transplantation: the experience in a university-affiliated medical center in Taiwan

PubMed Central

2014-01-01

Background The process involved in organ procurement and transplantation is very complex that requires multidisciplinary coordination and teamwork. To prevent error during the processes, teamwork education and training might play an important role. We wished to evaluate the efficacy of implementing a Team Resource Management (TRM) program on patient safety and the behaviors of the team members involving in the process. Methods We implemented a TRM training program for the organ procurement and transplantation team members of the National Taiwan University Hospital (NTUH), a teaching medical center in Taiwan. This 15-month intervention included TRM education and training courses for the healthcare workers, focused group skill training for the procurement and transplantation team members, video demonstration and training, and case reviews with feedbacks. Teamwork culture was evaluated and all procurement and transplantation cases were reviewed to evaluate the application of TRM skills during the actual processes. Results During the intervention period, a total of 34 staff members participated the program, and 67 cases of transplantations were performed. Teamwork framework concept was the most prominent dimension that showed improvement from the participants for training. The team members showed a variety of teamwork behaviors during the process of procurement and transplantation during the intervention period. Of note, there were two potential donors with a positive HIV result, for which the procurement processed was timely and successfully terminated by the team. None of the recipients was transplanted with an infected organ. No error in communication or patient identification was noted during review of the case records. Conclusion Implementation of a Team Resource Management program improves the teamwork culture as well as patient safety in organ procurement and transplantation. PMID:25115403

Safety assessment, detection and traceability, and societal aspects of genetically modified foods. European Network on Safety Assessment of Genetically Modified Food Crops (ENTRANSFOOD). Concluding remarks.

PubMed

Kuiper, H A; König, A; Kleter, G A; Hammes, W P; Knudsen, I

2004-07-01

The most important results from the EU-sponsored ENTRANSFOOD Thematic Network project are reviewed, including the design of a detailed step-wise procedure for the risk assessment of foods derived from genetically modified crops based on the latest scientific developments, evaluation of topical risk assessment issues, and the formulation of proposals for improved risk management and public involvement in the risk analysis process. Copyright 2004 Elsevier Ltd.

Risk Management Plans: are they a tool for improving drug safety?

PubMed

Frau, Serena; Font Pous, Maria; Luppino, Maria Rosa; Conforti, Anita

2010-08-01

In 2005, new European legislation authorised Regulatory Agencies to require drug companies to submit a risk management plan (RMP) comprising detailed commitments for post-marketing pharmacovigilance. The aim of the study is to describe the characteristics of RMP for 15 drugs approved by the European Medicines Agency (EMA) and their impact on post-marketing safety issues. Of the 90 new Chemical Entities approved through a centralised procedure by the EMA during 2006 and 2007, 15 of them were selected and their safety aspects and relative RMPs analysed. All post-marketing communications released for safety reasons related to these drugs were also considered. A total of 157 safety specifications were established for the drugs assessed. Risk minimisation activities were foreseen for 5 drugs as training activities. Post-marketing safety issues emerged for 12 of them, leading to 39 type II variations in Summary of Product Characteristics (SPC). Nearly half of such variations, 19 (49%), concerned safety aspects not envisaged by the RMPs. Besides this, 9 Safety Communications were published for 6 out of 15 drugs assessed. The present study reveals several critical points on the way RMPs have been implemented. Several activities proposed by the RMPs do not appear to be adequate in dealing with the potential risks of drugs. Poor communication of risk to practitioners and to the public, and above all limited transparency for the total assessment of risk, seem to transform RMPs into a tool to reassure the public when inadequately evaluated drugs are granted premature marketing authorisation.

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What must an equivalent... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

PubMed

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Achieving Safety through Security Management

NASA Astrophysics Data System (ADS)

Ridgway, John

Whilst the achievement of safety objectives may not be possible purely through the administration of an effective Information Security Management System (ISMS), your job as safety manager will be significantly eased if such a system is in place. This paper seeks to illustrate the point by drawing a comparison between two of the prominent standards within the two disciplines of security and safety management.

41 CFR 128-1.8004 - Seismic Safety Coordinators.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false Seismic Safety... Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8004 Seismic Safety Coordinators. (a) The Justice Management Division shall designate an...

41 CFR 128-1.8004 - Seismic Safety Coordinators.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false Seismic Safety... Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8004 Seismic Safety Coordinators. (a) The Justice Management Division shall designate an...

41 CFR 128-1.8004 - Seismic Safety Coordinators.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false Seismic Safety... Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8004 Seismic Safety Coordinators. (a) The Justice Management Division shall designate an...

41 CFR 128-1.8004 - Seismic Safety Coordinators.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Seismic Safety... Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8004 Seismic Safety Coordinators. (a) The Justice Management Division shall designate an...

[Strategy for implementing and assessing a health care risk management unit in a primary care area].

PubMed

Mena Mateo, José María; de la Fuente, Angel Sanz-Vírseda; Cañada Dorado, Asunción; Villamor Borrego, Manuela

2009-06-01

To describe the setting up of a clinical risk management unit (CRMU) within primary care management, as well as the aims of the project, its implementation phases and the assessment of the results after one year of experience. A safety plan was prepared, based on the European Excellence Model (EFQM), to establish a strategic working framework. The plan included 38 proposed actions, associated with criteria elements and 26 indicators to evaluate the selected criteria. A total of 82% of the anticipated actions were implemented in 2007, which included, actions related to teaching and training (15 activities with 237 trainees), spreading of information associated with patient safety, incident analysis (14) and the introduction of specific safe practices (12). Four of those were considered as "generalisable" safe practices and were spread to the rest of the CRMUs in the Autonomous Region of Madrid. The CRMUs have introduced and monitored three processes related to patient safety, participated in a formal programme on the polymedicated elderly, with good results in cover and quality of the indicators. A primary care team (PCT) from the area took part in the first study carried out in Spain on adverse effects in primary care (APEAS Study). The CRMU can give impetus to strategic lines of safety. The preparation of a strategy defining specific aims has helped in the introduction of patient safety activities and along with the proposed indicators enables the impact of the intervention to be assessed.

Learning to manage vasoactive drugs-A qualitative interview study with critical care nurses.

PubMed

Häggström, Marie; Bergsman, Ann-Christin; Månsson, Ulrika; Holmström, Malin Rising

2017-04-01

Being a nurse in an intensive care unit entails caring for seriously ill patients. Vasoactive drugs are one of the tools that are used to restore adequate circulation. Critical care nurses often manage and administer these potent drugs after medical advice from physicians. To describe the experiences of critical care nurses learning to manage vasoactive drugs, and to highlight the competence required to manage vasoactive drugs. Twelve critical care nurses from three hospitals in Sweden were interviewed. Qualitative content analysis was applied. The theme "becoming proficient requires accuracy, practice and precaution" illustrated how critical care nurses learn to manage vasoactive drugs. Learning included developing cognitive, psychomotor, and effective skills. Sources for knowledge refers to specialist education combined with practical exercises, collegial support, and accessible routine documents. The competence required to manage vasoactive drugs encompassed well-developed safety thinking that included being careful, in control, and communicating failures. Specific skills were required such as titrating doses, being able to analyse and evaluate the technological assessments, adapting to the situation, and staying calm. Learning to manage vasoactive drugs requires a supportive introduction for novices, collegial support, lifelong learning, and a culture of safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Safety, Health, and Fire Prevention Guide for Hospital Safety Managers

DTIC Science & Technology

1993-03-01

Safety committee S 2-5 Oxygen quality assurance program 0 2-6 Safety and fire prevention library 0 2-7 Safety services to Dental Activities • 2-8...Chapter 2 Safety Management 2-1. Safety policy statement Health Services Command (HSC) Supplement (Suppl) 1 to Army Regulation (AR) 385-10 and the...Management. (b) The medical staff. (c) The nursing service . (d) Logistics. (e) Nutritional care. (f) Preventive medicine. * 2-3 USAEHA TG No. 152 March 1993 (g

Health and safety management systems: liability or asset?

PubMed

Bennett, David

2002-01-01

Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

Application of the MERIT survey in the multi-criteria quality assessment of occupational health and safety management.

PubMed

Korban, Zygmunt

2015-01-01

Occupational health and safety management systems apply audit examinations as an integral element of these systems. The examinations are used to verify whether the undertaken actions are in compliance with the accepted regulations, whether they are implemented in a suitable way and whether they are effective. One of the earliest solutions of that type applied in the mining industry in Poland involved the application of audit research based on the MERIT survey (Management Evaluation Regarding Itemized Tendencies). A mathematical model applied in the survey facilitates the determination of assessment indexes WOPi for each of the assessed problem areas, which, among other things, can be used to set up problem area rankings and to determine an aggregate (synthetic) assessment. In the paper presented here, the assessment indexes WOPi were used to calculate a development measure, and the calculation process itself was supplemented with sensitivity analysis.

A systematic checklist approach to immunosuppression risk management: An audit of practice at two clinical neuroimmunology centers.

PubMed

Mori, Amelia M; Agarwal, Smriti; Lee, Monique W M; Rafferty, Martina; Hardy, Todd A; Coles, Alasdair; Reddel, Stephen W; Riminton, D Sean

2017-11-15

There is no consensus approach to safety screening for immune intervention in clinical neuroimmunology. An immunosuppression risk evaluation checklist was used as an audit tool to assess real-world immunosuppression risk management and formulate recommendations for quality improvements in patient safety. Ninety-nine patients from two centres with 27 non-MS diagnoses were included. An average of 1.9 comorbidities with the potential to adversely impact morbidity and mortality associated with immunosuppression were identified. Diabetes and smoking were the most common, however a range of rarer but potentially life-threatening co-morbid disorders in the context of immunosuppression were identified. Inadequate documentation of risk mitigation tasks was common at 40.1% of total tasks across both cohorts. A routine, systematic immunosuppression checklist approach should be considered to improve immunosuppression risk management in clinical neuroimmunology practice. Copyright © 2017 Elsevier B.V. All rights reserved.

44 CFR 150.5 - Joint Public Safety Awards Board.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Joint Public Safety Awards Board. 150.5 Section 150.5 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY FIRE PREVENTION AND CONTROL PUBLIC SAFETY AWARDS TO PUBLIC SAFETY OFFICERS...

Efficacy and safety of biologic therapies for systemic lupus erythematosus treatment: systematic review and meta-analysis.

PubMed

Borba, Helena Hiemisch Lobo; Wiens, Astrid; de Souza, Thais Teles; Correr, Cassyano Januário; Pontarolo, Roberto

2014-04-01

The objectives of this study were to evaluate the efficacy, safety, and tolerability of biologic drugs compared with placebo for systemic lupus erythematosus (SLE) treatment. A systematic review evaluating the efficacy and safety of biologic therapies compared with placebo in adult SLE patients treatment was performed. Data from studies performed before September 2013 were collected from several databases (MEDLINE, Cochrane Library, SCIELO, Scopus, and International Pharmaceutical Abstracts). Study eligibility criteria included randomized, double-blind, placebo-controlled trials; regarding treatment with biologic agents in SLE adult patients; and published in English, German, Portuguese, and Spanish. Extracted data were statistically analyzed in a meta-analysis using the Review Manager (RevMan) 5.1 software. Efficacy outcomes included the SELENA-SLEDAI (Safety of Estrogens in Lupus Erythematosus National Assessment version of the SLE Disease Activity Index) score, the SRI (Systemic Lupus Erythematosus Responder Index), normalization of low C3 (<90 mg/dL), anti-double-stranded DNA positive to negative, and no new BILAG (British Isles Lupus Assessment Group index) 1A or 2B flares. Data on safety profile included adverse events, serious and severe adverse events, death, malignancy, infections, and infusion reactions. We also evaluated withdrawals from treatment due to lack of efficacy or adverse events. Thirteen randomized placebo-controlled trials met the criteria for data extraction for systematic review. A meta-analysis regarding the efficacy and safety of belimumab compared with placebo involving four of these trials was undertaken and the remainder contributed to a meta-analysis of the safety of biologic agents. In addition, two trials allowed the performance of a meta-analysis regarding the efficacy and safety of rituximab compared with placebo. Belimumab was more effective than placebo in most evaluated outcomes. No significant differences in the safety and tolerability data were observed between the belimumab and placebo groups. No differences were observed between the rituximab and placebo groups for the efficacy outcomes or safety parameters. Extracted data from the 13 studies were pooled, allowing assessment of the safety of biologic drugs. The meta-analysis revealed a satisfactory safety profile of these agents when used for SLE treatment, as there were no significant differences between the two evaluated groups (biologic agents and placebo) for all outcomes analyzed. Belimumab exhibited a satisfactory profile regarding efficacy, safety, and tolerability. Rituximab showed no superiority over placebo in terms of efficacy, despite its suitable safety profile. Biologic agents exhibited a good safety profile for SLE treatment, indicating that these agents are promising therapies and should be further investigated.

Evaluation of the Central Puget Sound Regional Fare Coordination Project

DOT National Transportation Integrated Search

2000-03-01

Utah's basic highway information system is one of the most complete data base management systems found in any of the Highway Safety Information System (HSIS) States in terms of the number of files included in the system and the flexibility of output....

South Lake Tahoe Coordinated Transit System project : phase III evaluation report

DOT National Transportation Integrated Search

2000-03-01

Utah's basic highway information system is one of the most complete data base management systems found in any of the Highway Safety Information System (HSIS) States in terms of the number of files included in the system and the flexibility of output....

Design, development and evaluation of driver wellness programs. Technical memorandum 3 : pilot test results and marketing plan

DOT National Transportation Integrated Search

1999-10-31

In May, 1997, the National Private Truck Councils (NPTC) Private Fleet Management Institute (PFMI) began a research program in cooperation with Sue Roberts Health Concepts, Inc., ATA Foundation, Inc., and the Federal Motor Carrier Safety Administr...

Using expert opinion to quantify accuracy and reliability of nondestructive evaluation on bridges.

DOT National Transportation Integrated Search

2015-08-01

Bridge inspection is an important phase in bridge management. In 2009, a joint American Society of Civil : Engineers Structural Engineering Institute and AASHTO Ad-Hoc group was created to identify the issues : in bridge safety and to study current b...

Bomber Deterrence Missions: Criteria To Evaluate Mission Effectiveness

DTIC Science & Technology

2016-02-16

International Relations from Brigham Young University and a Master of Science degree in Aviation Safety Management from the University of Central...AIR WAR COLLEGE AIR UNIVERSITY BOMBER DETERRENCE MISSIONS: CRITERIA TO EVALUATE MISSION EFFECTIVENESS by Bradley L. Cochran, Col, USAF A...paper are those of the author and do not reflect the official policy or position of the US government, the Department of Defense, or Air University

Evaluating a Training Intervention to Prepare Geriatric Case Managers to Assess for Suicide and Firearm Safety

ERIC Educational Resources Information Center

Pope, Natalie D.; Slovak, Karen L.; Giger, Jarod T.

2016-01-01

The purpose of this article is to report on the implementation and initial evaluation of a 1-day training intervention targeting direct care providers in the Ohio aging services network. A primary objective is to describe the training intervention that consisted of two parts: (a) a gatekeeper training for assessing suicide risk among older adults,…

Nondestructive evaluation: A survey of NASA contributions, chapter 1, Chapter 11, cover page, acknowledgements, and contents

NASA Technical Reports Server (NTRS)

1972-01-01

A survey of nondestructive evaluation (NDE) technology, which is discussed in terms of popular demands for a greater degree of quality, reliability, and safety in industrial products, is presented as an overview of the NDE field to serve the needs of middle management. Three NDE methods are presented: acoustic emission, the use of coherent (laser)light, and ultrasonic holography.

CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, S

2009-04-21

With the implementation of DOE Order 420.1B, Facility Safety, and DOE-STD-3007-2007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities', a new requirement was imposed that all criticality safety controls be evaluated for inclusion in the facility Documented Safety Analysis (DSA) and that the evaluation process be documented in the site Criticality Safety Program Description Document (CSPDD). At the Hanford site in Washington State the CSPDD, HNF-31695, 'General Description of the FH Criticality Safety Program', requires each facility develop a linking document called a Criticality Control Review (CCR) to document performance of these evaluations. Chapter 5,more » Appendix 5B of HNF-7098, Criticality Safety Program, provided an example of a format for a CCR that could be used in lieu of each facility developing its own CCR. Since the Plutonium Finishing Plant (PFP) is presently undergoing Deactivation and Decommissioning (D&D), new procedures are being developed for cleanout of equipment and systems that have not been operated in years. Existing Criticality Safety Evaluations (CSE) are revised, or new ones written, to develop the controls required to support D&D activities. Other Hanford facilities, including PFP, had difficulty using the basic CCR out of HNF-7098 when first implemented. Interpretation of the new guidelines indicated that many of the controls needed to be elevated to TSR level controls. Criterion 2 of the standard, requiring that the consequence of a criticality be examined for establishing the classification of a control, was not addressed. Upon in-depth review by PFP Criticality Safety staff, it was not clear that the programmatic interpretation of criterion 8C could be applied at PFP. Therefore, the PFP Criticality Safety staff decided to write their own CCR. The PFP CCR provides additional guidance for the evaluation team to use by clarifying the evaluation criteria in DOE-STD-3007-2007. In reviewing documents used in classifying controls for Nuclear Safety, it was noted that DOE-HDBK-1188, 'Glossary of Environment, Health, and Safety Terms', defines an Administrative Control (AC) in terms that are different than typically used in Criticality Safety. As part of this CCR, a new term, Criticality Administrative Control (CAC) was defined to clarify the difference between an AC used for criticality safety and an AC used for nuclear safety. In Nuclear Safety terms, an AC is a provision relating to organization and management, procedures, recordkeeping, assessment, and reporting necessary to ensure safe operation of a facility. A CAC was defined as an administrative control derived in a criticality safety analysis that is implemented to ensure double contingency. According to criterion 2 of Section IV, 'Linkage to the Documented Safety Analysis', of DOESTD-3007-2007, the consequence of a criticality should be examined for the purposes of classifying the significance of a control or component. HNF-PRO-700, 'Safety Basis Development', provides control selection criteria based on consequence and risk that may be used in the development of a Criticality Safety Evaluation (CSE) to establish the classification of a component as a design feature, as safety class or safety significant, i.e., an Engineered Safety Feature (ESF), or as equipment important to safety; or merely provides defense-in-depth. Similar logic is applied to the CACs. Criterion 8C of DOE-STD-3007-2007, as written, added to the confusion of using the basic CCR from HNF-7098. The PFP CCR attempts to clarify this criterion by revising it to say 'Programmatic commitments or general references to control philosophy (e.g., mass control or spacing control or concentration control as an overall control strategy for the process without specific quantification of individual limits) is included in the PFP DSA'. Table 1 shows the PFP methodology for evaluating CACs. This evaluation process has been in use since February of 2008 and has proven to be simple and effective. Each control identified in the applicable new/revised CSE is evaluated via the table. The results of this evaluation are documented in tables attached to the CCR as an appendix, for each CSE, to the base document.« less

[Outpatient management of patients with deep vein thrombosis and cancer: a study of safety, cost and budget impact].

PubMed

Jara Palomares, Luis; Caballero Eraso, Candela; Elías Hernández, Teresa; Ferrer Galván, Marta; Márquez Peláez, Sergio; Cayuela, Aurelio; Alfaro, María José; Barrot Cortés, Emilia; Otero Candelera, Remedios

2012-04-07

This is a safety and cost comparison study with an analysis of budgetary impact of ambulatory management of patients with cancer and deep vein thrombosis (DVT) compared with hospital management. Prospective observational study of patients with known malignancy and diagnosed with DVT from 2003 to 2007. The outcome variables were mortality, relapse and bleeding in one month. We conducted an economic analysis to evaluate the comparative cost of ambulatory patients. Three hundred and seventeen patients, 55 (17%) had cancer. The mean age of patients was 63 ± 11 years. There were 2 hemorrhagic events, 2 recurrences and 6 deaths in one month of follow-up. Of all patients, only 7 (13,7%) required hospitalization. All but one deaths were due to progression of the underlying disease. Economic analysis concluded that outpatient management is 6 times less expensive than hospital management, which would imply a cost reduction of 85%. Specialized outpatient treatment of cancer patients with DVT is safe and could save significant financial resources. Copyright © 2011 Elsevier España, S.L. All rights reserved.

Safety and Waste Management for SAM Pathogen Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Requirements Analysis for the Army Safety Management Information System (ASMIS)

DTIC Science & Technology

1989-03-01

8217_>’ Telephone Number « .. PNL-6819 Limited Distribution Requirements Analysis for the Army Safety Management Information System (ASMIS) Final...PNL-6819 REQUIREMENTS ANALYSIS FOR THE ARMY SAFETY MANAGEMENT INFORMATION SYSTEM (ASMIS) FINAL REPORT J. S. Littlefield A. L. Corrigan March...accidents. This accident data is available under the Army Safety Management Information System (ASMIS) which is an umbrella for many databases

First, keep it safe: Integration of a complementary medicine service within a hospital.

PubMed

Schiff, Elad; Levy, Ilana; Arnon, Zahi; Ben-Arye, Eran; Attias, Samuel

2018-05-01

This paper sought to explore risk/safety considerations associated with the integration of a complementary medicine (CM) service within a public academic medical centre in Israel. We reviewed various sources pertaining to the CM service (interviews with CM staff, patients' electronic charts, service guidelines, correspondence with hospital administration) and conducted a thematic analysis to evaluate safety-related incidents during the 7 years of operation. In addition, we systematically assessed the charts for reports of treatment-associated adverse effects, which were documented in an obligatory field on treatment reports. After reviewing transcripts of interviews with 12 CM practitioners and with the director and vice-director of the CM service as well as transcripts of 8560 consultations that included 7383 treatments, we categorised 3 major domains of CM safety management: (i) prevention of safety-related incidents by appropriate selection of CM practitioners and modalities, (ii) actual adverse incidents and (iii) prevention of their recurrence using both hospital and CM service safety protocols. CM staff reported 5 categories of adverse incidents, most of which were minor. Twenty-nine adverse incidents were documented in the 7383 treatment sessions (0.4%). Safety management needs to be addressed both before introducing CM services in hospitals and throughout their integration. Important considerations for the safe integration of CM practices in the hospital include communication between CM and conventional practitioners, adherence to hospital safety rules, implementing a systematic approach for detecting and reporting safety-related incidents and continuous adaptation of the CM service safety protocols. © 2018 John Wiley & Sons Ltd.

Inspection Score and Grading System for Food Services in Brazil: The Results of a Food Safety Strategy to Reduce the Risk of Foodborne Diseases during the 2014 FIFA World Cup.

PubMed

da Cunha, Diogo T; Saccol, Ana L de Freitas; Tondo, Eduardo C; de Oliveira, Ana B A; Ginani, Veronica C; Araújo, Carolina V; Lima, Thalita A S; de Castro, Angela K F; Stedefeldt, Elke

2016-01-01

In 2014, Brazil hosted one of the most popular sport competitions in the world, the FIFA World Cup. Concerned about the intense migration of tourists, the Brazilian government decided to deploy a food safety strategy based on inspection scores and a grading system applied to food services. The present study aimed to evaluate the results of the food safety strategy deployed during the 2014 FIFA World Cup in Brazil. To assess food safety, an evaluation instrument was applied twice in 1927 food service establishments from 26 cities before the start of the competition. This instrument generated a food safety score for each establishment that ranged from 0.0 (no flaws observed) to 2565.95, with four possible grades: A (0.0-13.2); B (13.3-502.6); C (502.7-1152.2); and pending (more than 1152.3). Each food service received a stamp with the grade of the second evaluation. After the end of the World Cup, a study was conducted with different groups of the public to evaluate the acceptance of the strategy. To this end, 221 consumers, 998 food service owners or managers, 150 health surveillance auditors, and 27 health surveillance coordinators were enrolled. These participants completed a survey with positive and negative responses about the inspection score system through a 5-point Likert scale. A reduction in violation scores from 393.1 to 224.4 (p < 0.001) was observed between the first and second evaluation cycles. Of the food services evaluated, 38.7% received the A stamp, 41.4% the B stamp, and 13.9% the C stamp. All positive responses on "system reliability" presented a mean of 4.0 or more, indicating that the public believed this strategy is reliable for communicating risks and promoting food safety. The strategy showed positive results regarding food safety and public acceptance. The deployed strategy promoted improvements in the food safety of food services. The implementation of a permanent policy may be well accepted by the public and may greatly contribute to a reduction in foodborne diseases (FBDs).

Efficacy and Safety of Remifentanil as an Alternative Labor Analgesic

PubMed Central

Devabhakthuni, Sandeep

2013-01-01

The objective of this review was to evaluate the clinical efficacy and safety of remifentanil in the management of labor pain. Although neuraxial analgesia is the best option during labor, alternative analgesic options are needed for patients with contraindications. Using a systematic literature search, clinical outcomes of remifentanil for labor pain have been summarized. Also, comparisons of remifentanil to other options including meperidine, epidural analgesia, fentanyl, and nitrous oxide are provided. Based on the literature review, remifentanil is associated with high overall maternal satisfaction and favorable side-effect profile. However, due to the low reporting of adverse events, large, randomized controlled trials are needed to evaluate maternal and neonatal safety adequately and determine the optimal dosing needed to provide effective analgesia. While remifentanil is a feasible alternative for patients who cannot or do not want to receive epidural analgesia, administration should be monitored closely for potential adverse effects. PMID:24665213

Prediction based active ramp metering control strategy with mobility and safety assessment

NASA Astrophysics Data System (ADS)

Fang, Jie; Tu, Lili

2018-04-01

Ramp metering is one of the most direct and efficient motorway traffic flow management measures so as to improve traffic conditions. However, owing to short of traffic conditions prediction, in earlier studies, the impact on traffic flow dynamics of the applied RM control was not quantitatively evaluated. In this study, a RM control algorithm adopting Model Predictive Control (MPC) framework to predict and assess future traffic conditions, which taking both the current traffic conditions and the RM-controlled future traffic states into consideration, was presented. The designed RM control algorithm targets at optimizing the network mobility and safety performance. The designed algorithm is evaluated in a field-data-based simulation. Through comparing the presented algorithm controlled scenario with the uncontrolled scenario, it was proved that the proposed RM control algorithm can effectively relieve the congestion of traffic network with no significant compromises in safety aspect.

46 CFR 107.415 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 107.415 Section 107.415 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 107.415 Safety Management Certificate. (a)...

System safety education focused on flight safety

NASA Technical Reports Server (NTRS)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

Safety and Waste Management for SAM Chemistry Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Leadership for safety: industrial experience

PubMed Central

Flin, R; Yule, S

2004-01-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters. PMID:15576692

Contribution of European research to risk analysis.

PubMed

Boenke, A

2001-12-01

The European Commission's, Quality of Life Research Programme, Key Action 1-Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety, of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches, harmonization of risk assessment principles methodologies and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries, to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women, evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.

77 FR 54615 - Strategic Management Program; Fiscal Year 2013-2016 Strategic Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-05

... Manager, Strategic Management Program; National Transportation Safety Board, 490 L'Enfant Plaza SW., MD-1... NATIONAL TRANSPORTATION SAFETY BOARD Strategic Management Program; Fiscal Year 2013-2016 Strategic Plan AGENCY: National Transportation Safety Board. ACTION: Notice: Request for comments. SUMMARY: This...

ePORT, NASA's Computer Database Program for System Safety Risk Management Oversight (Electronic Project Online Risk Tool)

NASA Technical Reports Server (NTRS)

Johnson, Paul W.

2008-01-01

ePORT (electronic Project Online Risk Tool) provides a systematic approach to using an electronic database program to manage a program/project risk management processes. This presentation will briefly cover the standard risk management procedures, then thoroughly cover NASA's Risk Management tool called ePORT. This electronic Project Online Risk Tool (ePORT) is a web-based risk management program that provides a common framework to capture and manage risks, independent of a programs/projects size and budget. It is used to thoroughly cover the risk management paradigm providing standardized evaluation criterion for common management reporting, ePORT improves Product Line, Center and Corporate Management insight, simplifies program/project manager reporting, and maintains an archive of data for historical reference.

Improving quality and safety in nursing homes and home care: the study protocol of a mixed-methods research design to implement a leadership intervention.

PubMed

Wiig, Siri; Ree, Eline; Johannessen, Terese; Strømme, Torunn; Storm, Marianne; Aase, Ingunn; Ullebust, Berit; Holen-Rabbersvik, Elisabeth; Hurup Thomsen, Line; Sandvik Pedersen, Anne Torhild; van de Bovenkamp, Hester; Bal, Roland; Aase, Karina

2018-03-28

Nursing homes and home care face challenges across different countries as people are living longer, often with chronic conditions. There is a lack of knowledge regarding implementation and impact of quality and safety interventions as most research evidence so far is generated in hospitals. Additionally, there is a lack of effective leadership tools for quality and safety improvement work in this context. The aim of the 'Improving Quality and Safety in Primary Care-Implementing a Leadership Intervention in Nursing Homes and Homecare' (SAFE-LEAD) study is to develop and evaluate a research-based leadership guide for managers to increase quality and safety competence. The project applies a mixed-methods design and explores the implications of the leadership guide on managers' and staffs' knowledge, attitudes and practices. Four nursing homes and four home care services from different Norwegian municipalities will participate in the intervention. Surveys, process evaluation (interviews, observations) and document analyses will be conducted to evaluate the implementation and impact of the leadership intervention. A comparative study of Norway and the Netherlands will establish knowledge of the context dependency of the intervention. The study is approved by the Norwegian Centre for Research Data (2017/52324 and 54855). The results will be disseminated through scientific articles, two PhD dissertations, an anthology, presentations at national and international conferences, and in social media, newsletters and in the press. The results will generate knowledge to inform leadership practices in nursing homes and home care. Moreover, the study will build new theory on leadership interventions and the role of contextual factors in nursing homes and home care. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Safety I-II, resilience and antifragility engineering: a debate explained through an accident occurring on a mobile elevating work platform.

PubMed

Martinetti, Alberto; Chatzimichailidou, Maria Mikela; Maida, Luisa; van Dongen, Leo

2018-04-24

Occupational health and safety (OHS) represents an important field of exploration for the research community: in spite of the growth of technological innovations, the increasing complexity of systems involves critical issues in terms of degradation of the safety levels. In such a situation, new safety management approaches are now mandatory in order to face the safety implications of the current technological evolutions. Along these lines, performing risk-based analysis alone seems not to be enough anymore. The evaluation of robustness, antifragility and resilience of a socio-technical system is now indispensable in order to face unforeseen events. This article will briefly introduce the topics of Safety I and Safety II, resilience engineering and antifragility engineering, explaining correlations, overlapping aspects and synergies. Secondly, the article will discuss the applications of those paradigms to a real accident, highlighting how they can challenge, stimulate and inspire research for improving OHS conditions.

Supervisor vs. employee safety perceptions and association with future injury in US limited-service restaurant workers.

PubMed

Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2012-07-01

Many studies have found management commitment to safety to be an important construct of safety climate. This study examined the association between supervisor and employee (shared and individual) perceptions of management commitment to safety and the rate of future injuries in limited-service restaurant workers. A total of 453 participants (34 supervisors/managers and 419 employees) from 34 limited-service restaurants participated in a prospective cohort study. Employees' and managers' perceptions of management commitment to safety and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. There were no significant relationships between supervisor and either individual or shared employee perceptions of management commitment to safety. Only individual employee perceptions were significantly associated with future employee injury experience but not supervisor safety perceptions or shared employee perceptions. Individual employee perception of management commitment to safety is a significant predictor for future injuries in restaurant environments. A study focusing on employee perceptions would be more predictive of injury outcomes than supervisor/manager perceptions. Copyright © 2012 Elsevier Ltd. All rights reserved.

General Safety and Waste Management Related to SAM

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for chemicals, radiochemicals, pathogens, and biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

A comprehensive guide to fuel management practices for dry mixed conifer forests in the northwestern United States: Monitoring

Treesearch

Theresa B. Jain; Mike A. Battaglia; Han-Sup Han; Russell T. Graham; Christopher R. Keyes; Jeremy S. Fried; Jonathan E. Sandquist

2014-01-01

Short- and medium-term evaluation of how fuel treatments are working is the only way to know if the hundreds of activities on the ground are adding up to the goals of more resilient landscapes and increased safety of people and property. Monitoring is a critical resource for decision makers who design fuels management programs, however it is an often neglected part of...

The role of health and safety experts in the management of hazardous and toxic wastes in Indonesia

NASA Astrophysics Data System (ADS)

Supriyadi; Hadiyanto

2018-02-01

Occupational Safety and Health Experts in Indonesia have an important role in integrating environmental health and safety factors, including in this regard as human resources assigned to undertake hazardous waste management. Comprehensive knowledge and competence skills need to be carried out responsibly, as an inherent professional occupational safety and health profession. Management leaders should continue to provide training in external agencies responsible for science in the management of toxic waste to enable occupational safety and health experts to improve their performance in the hierarchy of control over the presence of hazardous materials. This paper provides an overview of what strategies and competencies the Occupational Safety and Health expert needs to have in embracing hazardous waste management practices.

Psychometric properties of the Norwegian version of the Safety Attitudes Questionnaire (SAQ), Generic version (Short Form 2006).

PubMed

Deilkås, Ellen T; Hofoss, Dag

2008-09-22

How to protect patients from harm is a question of universal interest. Measuring and improving safety culture in care giving units is an important strategy for promoting a safe environment for patients. The Safety Attitudes Questionnaire (SAQ) is the only instrument that measures safety culture in a way which correlates with patient outcome. We have translated the SAQ to Norwegian and validated the translated version. The psychometric properties of the translated questionnaire are presented in this article. The questionnaire was translated with the back translation technique and tested in 47 clinical units in a Norwegian university hospital. SAQ's (the Generic version (Short Form 2006) the version with the two sets of questions on perceptions of management: on unit management and on hospital management) were distributed to 1911 frontline staff. 762 were distributed during unit meetings and 1149 through the postal system. Cronbach alphas, item-to-own correlations, and test-retest correlations were calculated, and response distribution analysis and confirmatory factor analysis were performed, as well as early validity tests. 1306 staff members completed and returned the questionnaire: a response rate of 68%. Questionnaire acceptability was good. The reliability measures were acceptable. The factor structure of the responses was tested by confirmatory factor analysis. 36 items were ascribed to seven underlying factors: Teamwork Climate, Safety Climate, Stress Recognition, Perceptions of Hospital Management, Perceptions of Unit Management, Working conditions, and Job satisfaction. Goodness-of-Fit Indices showed reasonable, but not indisputable, model fit. External validity indicators - recognizability of results, correlations with "trigger tool"-identified adverse events, with patient satisfaction with hospitalization, patient reports of possible maltreatment, and patient evaluation of organization of hospital work - provided preliminary validation. Based on the data from Akershus University Hospital, we conclude that the Norwegian translation of the SAQ showed satisfactory internal psychometric properties. With data from one hospital only, we cannot draw strong conclusions on its external validity. Further validation studies linking the SAQ-scores to patient outcome data should be performed.

Measurement of worker perceptions of trust and safety climate in managers and supervisors at commercial grain elevators.

PubMed

Mosher, G A; Keren, N; Freeman, S A; Hurburgh, C R

2013-04-01

The safety climate of an agricultural workplace may be affected by several things, including the level of trust that workers have in their work group supervisor and organizational management. Safety climate has been used by previous safety researchers as a measure of worker perceptions of the relative importance of safety as compared with other operational goals. Trust has been linked to several positive safety outcomes, particularly in hazardous work environments, but has not been examined relative to safety climate in the perennially hazardous work environment of a commercial grain elevator. In this study, 177 workers at three Midwest grain elevator companies completed online surveys measuring their perceptions of trust and safety at two administrative levels: organizational management and work group supervisors. Positive and significant relationships were noted between trust and safety climate perceptions for organizational managers and for work group supervisors. Results from this research suggest that worker trust in organizational management and work group supervisors has a positive influence on the employees' perceptions of safety climate at the organizational and work group levels in an agricultural workplace.

Evaluation of Patient Safety Indicators in Semnan City Hospitals by Using the Patient Safety Friendly Hospital Initiative (PSFHI).

PubMed

Babamohamadi, Hassan; Nemati, Roghayeh Khabiri; Nobahar, Monir; Keighobady, Seifullah; Ghazavi, Soheila; Izadi-Sabet, Farideh; Najafpour, Zhila

2016-08-01

Nowadays, patient safety issue is among one of the main concerns of the hospital policy worldwide. This study aimed to evaluate the patient safety status in hospitals affiliated to Semnan city, using the WHO model for Patient Safety Friendly Hospital Initiatives (PSFHI) in summer 2014. That was a cross sectional descriptive study that addressed patient safety , which explained the current status of safety in the Semnan hospitals using by instrument of Patient safety friendly initiative standards (PSFHI). Data was collected from 5 hospitals in Semnan city during four weeks in May 2014. The finding of 5 areas examined showed that some components in critical standards had disadvantages. Critical standards of hospitals including areas of leadership and administration, patient and public involvement and safe evidence-based clinical practice, safe environment with and lifetime education in a safe and secure environment were analyzed. The domain of patient and public involvement obtained the lowest mean score and the domain of safe environment obtained the highest mean score in the surveyed hospitals. All the surveyed hospitals had a poor condition regarding standards based on patient safety. Further, the identified weak points are almost the same in the hospitals. Therefore, In order to achieve a good level of all aspects of the protocol, the goals should be considered in the level of strategic planning at hospitals. An effective execution of patient safety creatively may depend on the legal infrastructure and enforcement of standards by hospital management, organizational liability to expectation of patients, safety culture in hospitals.

Assessment of safety culture among job positions in high-rise construction: a hybrid fuzzy multi criteria decision-making (FMCDM) approach.

PubMed

Ardeshir, A; Mohajeri, M

2018-06-01

The construction industry is known as one of the most dangerous industries, which not only requires sound operation of executive laws and regulations, but also necessitates the safety culture of all workers at workshops. Therefore, the aim of this research is to identify the factors of safety culture and ranking occupations in jobsites based on those factors in order to proactively improve the safety culture of construction projects and subsequently promote safety conditions and worksites. In this study, safety culture criteria are weighted by a combination of Fuzzy Decision Trail and Evaluation Laboratory and Fuzzy ANP methods. Next, different job positions in high-rise projects are ranked using the Fuzzy Technique for Order of Preference by Similarity to Ideal Solution method. Findings demonstrated that the project manager, site superintendent and supervisor occupations had the highest and labourers had the lowest level of safety culture in the high-rise construction industry. Furthermore, factors such as safety supervision and training must be considered more seriously in order to create a positive safety culture among workers.

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2014 CFR

2014-01-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2011 CFR

2011-01-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

41 CFR 102-80.110 - What must an equivalent level of safety analysis indicate?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., and reliability of all building systems impacting fire growth, occupant knowledge of the fire, and... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety...

Potential cost savings of medication therapy management in safety-net clinics.

PubMed

Truong, Hoai-An; Groves, C Nicole; Congdon, Heather B; Dang, Diem-Thanh Tanya; Botchway, Rosemary; Thomas, Jennifer

2015-01-01

To evaluate potential cost savings based on estimated cost avoidance from medication therapy management (MTM) services delivered in safety-net clinics over 4 years. High-risk patients taking multiple medications and with chronic conditions were referred for MTM services in primary care safety-net clinics in Maryland from October 1, 2009, to September 30, 2013. Medication-related problems (MRPs) were identified and pharmacists' costs determined to evaluate the estimated cost savings and return on investment (ROI). A range of potential economic outcomes for each MRP identified was assigned to a cost avoidance for outpatient visit, urgent care visit, emergency department visit, and/or hospitalization. Over 4 years, 246 patients received MTM, nearly 2,100 medications were reviewed, and 814 MRPs were identified. The most common MRPs identified were subtherapeutic doses, nonadherence, and untreated indications, with respective prevalences of 38%, 19%, and 16%. The corresponding costs of medical services were estimated at $115,220-$614,570 for all MRPs identified, yielding a mean of $141.55-$755.00 per identified MRP. Pharmacists' expenses for encounters were calculated at a total expenditure of $57,307.50 for 16,965 minutes. ROI based on the time spent during billable face-to-face encounters ranged from 1:5 to 1:25. Pharmacist-provided MTM in safety-net clinics yielded potential economic benefits to the organization. The Primary Care Coalition of Montgomery County plans to expand MTM services to additional clinics to improve patient care and increase cost savings through preventable medical services.

When bad things happen: adverse event reporting and disclosure as patient safety and risk management tools in the neonatal intensive care unit.

PubMed

Donn, Steven M; McDonnell, William M

2012-01-01

The Institute of Medicine has recommended a change in culture from "name and blame" to patient safety. This will require system redesign to identify and address errors, establish performance standards, and set safety expectations. This approach, however, is at odds with the present medical malpractice (tort) system. The current system is outcomes-based, meaning that health care providers and institutions are often sued despite providing appropriate care. Nevertheless, the focus should remain to provide the safest patient care. Effective peer review may be hindered by the present tort system. Reporting of medical errors is a key piece of peer review and education, and both anonymous reporting and confidential reporting of errors have potential disadvantages. Diagnostic and treatment errors continue to be the leading sources of allegations of malpractice in pediatrics, and the neonatal intensive care unit is uniquely vulnerable. Most errors result from systems failures rather than human error. Risk management can be an effective process to identify, evaluate, and address problems that may injure patients, lead to malpractice claims, and result in financial losses. Risk management identifies risk or potential risk, calculates the probability of an adverse event arising from a risk, estimates the impact of the adverse event, and attempts to control the risk. Implementation of a successful risk management program requires a positive attitude, sufficient knowledge base, and a commitment to improvement. Transparency in the disclosure of medical errors and a strategy of prospective risk management in dealing with medical errors may result in a substantial reduction in medical malpractice lawsuits, lower litigation costs, and a more safety-conscious environment. Thieme Medical Publishers, Inc.

A qualitative assessment of the role of shippers and others in driver compliance with federal safety regulations

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Decision Support System Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the San Diego Integrated Corridor Management (ICM) Initiative Demonstration. The ICM pr...

Cooperative Education. Cosmetic Science: A Career Option for Majors in Chemistry.

ERIC Educational Resources Information Center

Lichtin, J. Leon; Radd, Billie L.

1987-01-01

Discusses the growing field of cosmetic science as a career option for chemistry majors. Outlines the design, formulation, manufacture, stabilization, evaluation, control management, safety, mechanism of action, and claim substantiation of cosmetic products. Provides information on the concerns and professional responsibilities of the cosmetic…

49 CFR 385.321 - What failures of safety management practices disclosed by the safety audit will result in a...

Code of Federal Regulations, 2010 CFR

2010-10-01

... disclosed by the safety audit will result in a notice to a new entrant that its USDOT new entrant... MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.321 What failures of safety management practices disclosed by the safety audit will result in a notice...

41 CFR 102-80.130 - Who must perform the equivalent level of safety analysis?

Code of Federal Regulations, 2010 CFR

2010-07-01

...-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety Analysis... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Who must perform the equivalent level of safety analysis? 102-80.130 Section 102-80.130 Public Contracts and Property Management...

46 CFR 91.60-30 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 91.60-30 Section 91.60-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-30 Safety Management Certificate. All...

Patient safety culture and job stress among nurses in Mazandaran, Iran.

PubMed

Asefzadeh, Saeed; Kalhor, Rohollah; Tir, Mohammad

2017-12-01

Paying attention to patient safety is a basic right and a necessary issue in providing medical care, and failure to observe it leads to irreparable damage. One of the factors affecting an individuals' performance in an organization is stress, which also endangers their health. To determine the relationship between patient safety culture and levels of job stress among the nurses working in the hospitals affiliated with Mazandaran University of Medical Sciences. The present study was carried out using a cross-sectional method in the hospitals affiliated with Mazandaran University of Medical Sciences in 2016. A multistage stratified sampling method using a Morgan Table was employed to select 380 nurses as the study sample from among 3,180 nurses. They were selected by a multistage stratified sampling method. The study instruments were Stinemetz Standard Job Stress Questionnaire and Hospital Survey on Patient Safety Culture (HSOPSC). After the required data were collected, they were analyzed using descriptive and inferential statistical methods (Pearson correlation, independent-samples t-test, and ANOVA) through SPSS version 23. The results of the present study showed that 75% of the nurses experienced average and high levels of stress. Among different dimensions of safety culture, organizational learning and handoffs and transitions obtained the highest and the lowest scores, respectively (72.5 and 24.5). The mean score of safety culture dimensions was 51.52. The results of the Pearson correlation test showed that there was a direct significant relationship between different dimensions of safety culture among nurses and the level of stress (p≤0.05). According to the findings, patient safety should be considered as a strategic priority for the senior managers of the health system. In order to enhance patient safety, managers should pay special attention to evaluating safety culture in organizations that deliver health service, especially hospitals.

Production and evaluation of children's dietary life safety index data on metropolitan cities and provinces in Korea

PubMed Central

Choi, Young-Sun; Lee, Jung-Sug; Kim, Hye-Young; Kwak, Tong-Kyung; Chung, Hae Rang; Kwon, Sehyug; Choi, Youn-Ju; Lee, Soon-Kyu

2012-01-01

This pilot study was performed to produce data of the Children's Dietary Life Safety (CDLS) Index which is required by the Special Act on Safety Management of Children's Dietary Life and to evaluate the CDLS Index for 7 metropolitan cities and 9 provinces in Korea. To calculate the CDLS Index score, data regarding the evaluation indicators in the children's food safety domain and children's nutrition safety domain were collected from the local governments in 2009. For data regarding the indicators in the children's perception & practice domain, a survey was conducted on 2,400 5th grade children selected by stratified sampling in 16 local areas. Relative scores of indicators in each domain were calculated using the data provided by local governments and the survey, the weights are applied on relative scores, and then the CDLS Index scores of local governments were produced by adding scores of the 3 domains. The national average scores of the food safety domain, the nutrition safety domain and the perception and practice domain were 23.74 (14.67-26.50 on a 40-point scale), 16.65 (12.25-19.60 on a 40-point scale), and 14.88 (14.16-15.30 on a 20-point scale), respectively. The national average score of the CDLS Index which was produced by adding the scores of the three domains was 55.27 ranging 46.44-58.94 among local governments. The CDLS Index scores produced in this study may provide the motivation for comparing relative accomplishment and for actively achieving the goals through establishment of the target value by local governments. Also, it can be used as useful data for the establishment and improvement of children's dietary life safety policy at the national level. PMID:23346305

76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

49 CFR 237.31 - Adoption of bridge management programs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Adoption of bridge management programs. 237.31... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Railroad Bridge Safety Assurance § 237.31 Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program to...

41 CFR 102-80.35 - What are Federal agencies' responsibilities concerning the monitoring of hazardous materials and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 102-80.35 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Safety and... Safety and Health Administration (OSHA), Department of Transportation, EPA, and applicable State and...

49 CFR 237.31 - Adoption of bridge management programs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Adoption of bridge management programs. 237.31... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Railroad Bridge Safety Assurance § 237.31 Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program to...

77 FR 34051 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... comments to http://www.regulations.gov . Submit written comments to the Division of Dockets Management (HFA...

The perceived compatibility of safety and production expectations in hazardous occupations.

PubMed

McLain, David L; Jarrell, Kimberly A

2007-01-01

Safety hazards are unavoidable in many work environments. Employees must be both productive and safe, however, conflicting safety and production demands can negatively affect safety, production, or both. The employee's perception of the compatibility of management's safety and production expectations is a possible predictor of such consequences. This paper defines "safety-production compatibility" and describes how measures of safety-production compatibility, as well as safety pressure and production pressure, were developed. We used LISREL structural equation modeling to test the influences of safety-production compatibility, safety pressure, and production pressure on safe work behavior and interference with performing other work tasks. The 239 study participants were workers employed in diverse but hazardous occupations. Pressure to work safely was positively associated with safe work behavior. The perceived compatibility of safety and production demands positively influenced safe work behavior and reduced the interference of safety hazards performing other tasks. Safety-production compatibility was also found to mediate the relationship between trust in management and safe work behavior. The results of this field study suggest increased compatibility, and thus less conflict, between safety and production demands influences safe work behavior and the interference of safety hazards with performing other work tasks. More broadly, the worker's reaction to multiple work demands is a safety and performance influence. Safety management efforts that focus only on the hazards fail to eliminate many accidents because accidents arise from many factors including technology, safety climate, social influences, production, and safety demands. This study suggests that workers differ in their perception of the compatibility of safety and production demands. These differences will show up in safe work behavior, influencing the effectiveness of safety management efforts and the trust workers have in management's concern for safety.

The FITS model office ergonomics program: a model for best practice.

PubMed

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Risk-informed Management of Water Infrastructure in the United States: History, Development, and Best Practices

NASA Astrophysics Data System (ADS)

Wolfhope, J.

2017-12-01

This presentation will focus on the history, development, and best practices for evaluating the risks associated with the portfolio of water infrastructure in the United States. These practices have evolved from the early development of the Federal Guidelines for Dam Safety and the establishment of the National Dam Safety Program, to the most recent update of the Best Practices for Dam and Levee Risk Analysis jointly published by the U.S. Department of Interior Bureau of Reclamation and the U.S. Army Corps of Engineers. Since President Obama signed the Water Infrastructure Improvements for the Nation Act (WIIN) Act, on December 16, 2016, adding a new grant program under FEMA's National Dam Safety Program, the focus has been on establishing a risk-based priority system for use in identifying eligible high hazard potential dams for which grants may be made. Finally, the presentation provides thoughts on the future direction and priorities for managing the risk of dams and levees in the United States.

Nonsurgical Outpatient Therapies for the Management of Female Stress Urinary Incontinence: Long-Term Effectiveness and Durability

PubMed Central

Davila, G. Willy

2011-01-01

Objective. To evaluate long-term effectiveness and safety of conservative and minimally invasive outpatient treatments for female stress urinary incontinence (SUI) through a review of the literature. Methods. PubMed was searched for reports on prospective clinical trials with at least 12-month follow-up of minimally invasive treatments, pelvic floor rehabilitation, or pharmacotherapy in women with SUI. Each report was examined for long-term rates of effectiveness and safety. Results. Thirty-two clinical trial reports were included. Prospective long-term studies of pelvic floor rehabilitation were limited but indicated significant improvements with treatment adherence for at least 12 months. Poor initial tolerability with duloxetine resulted in substantial discontinuation. Most patients receiving transurethral radiofrequency collagen denaturation or urethral bulking agents reported significant long-term improvements, generally good tolerability, and safety. Conclusions. Conservative therapy is an appropriate initial approach for female SUI, but if therapy fails, radiofrequency collagen denaturation or bulking agents may be an attractive intermediate management step or alternative to surgery. PMID:21738529

Environment, Safety and Health Self-Assessment Report Fiscal Year 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Scott

2011-03-23

The Lawrence Berkeley National Laboratory (LBNL) Environment, Safety, and Health (ES&H) Self-Assessment Program was established to ensure that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The ES&H Self-Assessment Program, managed by the Office of Contractor Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The primary objective of the program is to ensure that work is conducted safely and with minimal negative impact to workers, the public, and the environment. Self-assessment follows the five core functions and guiding principles of ISM. Self-assessment is the mechanism used to promote the continuousmore » improvement of the Laboratory's ES&H programs. The process is described in the Environment, Safety, and Health Assurance Plan (PUB-5344) and is composed of three types of self-assessments: Division ES&H Self-Assessment, ES&H Technical Assurance Program Assessment, and Division ES&H Peer Review. The Division ES&H Self-Assessment Manual (PUB-3105) provides the framework by which divisions conduct formal ES&H self-assessments to systematically identify program deficiencies. Issue-specific assessments are designed and implemented by the divisions and focus on areas of interest to division management. They may be conducted by teams and involve advance planning to ensure that appropriate resources are available. The ES&H Technical Assurance Program Manual (PUB-913E) provides the framework for systematic reviews of ES&H programs and processes. The ES&H Technical Assurance Program Assessment is designed to evaluate whether ES&H programs and processes are compliant with guiding regulations, are effective, and are properly implemented by LBNL divisions. The Division ES&H Peer Review Manual provides the framework by which division ISM systems are evaluated and improved. Peer Reviews are conducted by teams under the direction of senior division management and focus on higher-level management issues. Peer Review teams are selected on the basis of members knowledge and experience in the issues of interest to the division director. LBNL periodically requests in-depth independent assessments of selected ES&H programs. Such assessments augment LBNL's established assessment processes and provide an objective view of ES&H program effectiveness. Institutional Findings, Observations, and Noteworthy Practices identified during independent assessments are specifically intended to help LBNL identify opportunities for program improvement. This report includes the results of the Division ES&H Self-Assessment, ES&H Technical Assurance Program Assessment, and Division ES&H Peer Review, respectively.« less

Association of Safety Culture with Surgical Site Infection Outcomes.

PubMed

Fan, Caleb J; Pawlik, Timothy M; Daniels, Tania; Vernon, Nora; Banks, Katie; Westby, Peggy; Wick, Elizabeth C; Sexton, J Bryan; Makary, Martin A

2016-02-01

Hospital workplace culture may have an impact on surgical outcomes; however, this association has not been established. We designed a study to evaluate the association between safety culture and surgical site infection (SSI). Using the Hospital Survey on Patient Safety Culture and National Healthcare Safety Network definitions, we measured 12 dimensions of safety culture and colon SSI rates, respectively, in the surgical units of Minnesota community hospitals. A Pearson's r correlation was calculated for each of 12 dimensions of surgical unit safety culture and SSI rate and then adjusted for surgical volume and American Society of Anesthesiologists (ASA) classification. Seven hospitals participated in the study, with a mean survey response rate of 43%. The SSI rates ranged from 0% to 30%, and surgical unit safety culture scores ranged from 16 to 92 on a scale of 0 to 100. Ten dimensions of surgical unit safety culture were associated with colon SSI rates: teamwork across units (r = -0.96; 95% CI [-0.76, -0.99]), organizational learning (r = -0.95; 95% CI [-0.71, -0.99]), feedback and communication about error (r = -0.92; 95% CI [-0.56, -0.99]), overall perceptions of safety (r = -0.90; 95% CI [-0.45, -0.99]), management support for patient safety (r = -0.90; 95% CI [-0.44, -0.98]), teamwork within units (r = -0.88; 95% CI [-0.38, -0.98]), communication openness (r = -0.85; 95% CI [-0.26, -0.98]), supervisor/manager expectations and actions promoting safety (r = -0.85; 95% CI [-0.25, -0.98]), non-punitive response to error (r = -0.78; 95% CI [-0.07, -0.97]), and frequency of events reported (r = -0.76; 95% CI [-0.01, -0.96]). After adjusting for surgical volume and ASA classification, 9 of 12 dimensions of surgical unit safety culture were significantly associated with lower colon SSI rates. These data suggest an important role for positive safety and teamwork culture and engaged hospital management in producing high-quality surgical outcomes. Copyright © 2016. Published by Elsevier Inc.

Alaska Humans Factors Safety Study: The Southern Coastal Area

NASA Technical Reports Server (NTRS)

Chappell, Sheryl L.; Reynard, William (Technical Monitor)

1995-01-01

At the request of the Alaska Air Carriers Association, researchers from the NASA Aviation Safety Reporting System, at NASA Ames Research Center, conducted a study on aspects of safety in Alaskan Part 135 air taxi operations. An interview form on human factors safety issues was created by a representative team from the FAA-Alaska, NTSB-Alaska, NASA-ASRS, and representatives of the Alaska Air Carriers Association which was subsequently used in the interviews of pilots and managers. Because of the climate and operational differences, the study was broken into two geographical areas, the southern coastal areas and the northern portion of the state. This presentation addresses the southern coastal areas, specifically: Anchorage, Dillingham, King Salmon, Kodiak, Cold Bay, Juneau, and Ketchikan. The interview questions dealt with many of the potential pressures on pilots and managers associated with the daily air taxi operations in Alaska. The impact of the environmental factors such as the lack of available communication, navigation and weather information systems was evaluated. The results of this study will be used by government and industry working in Alaska. These findings will contribute important information on specific Alaska safety issues for eventual incorporation into training materials and policies that will help to assure the safe conduct of air taxi flights in Alaska.

Safety assessment methodology in management of spent sealed sources.

PubMed

Mahmoud, Narmine Salah

2005-02-14

Environmental hazards can be caused from radioactive waste after their disposal. It was therefore important that safety assessment methodologies be developed and established to study and estimate the possible hazards, and institute certain safety methodologies that lead and prevent the evolution of these hazards. Spent sealed sources are specific type of radioactive waste. According to IAEA definition, spent sealed sources are unused sources because of activity decay, damage, misuse, loss, or theft. Accidental exposure of humans from spent sealed sources can occur at the moment they become spent and before their disposal. Because of that reason, safety assessment methodologies were tailored to suit the management of spent sealed sources. To provide understanding and confidence of this study, validation analysis was undertaken by considering the scenario of an accident that occurred in Egypt, June 2000 (the Meet-Halfa accident from an iridium-192 source). The text of this work includes consideration related to the safety assessment approaches of spent sealed sources which constitutes assessment context, processes leading an active source to be spent, accident scenarios, mathematical models for dose calculations, and radiological consequences and regulatory criteria. The text also includes a validation study, which was carried out by evaluating a theoretical scenario compared to the real scenario of Meet-Halfa accident depending on the clinical assessment of affected individuals.

Impact of access management practices to pedestrian safety.

DOT National Transportation Integrated Search

2017-03-31

This study focused on the impact of access management practices to the safety of pedestrians. Some : of the access management practices considered to impact pedestrian safety included limiting direct : access to and from major streets, locating signa...

33 CFR 96.300 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS How Will Safety Management Systems... international certification for the company's and vessel's safety management system. ...

Applying Sensor-Based Technology to Improve Construction Safety Management.

PubMed

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Applying Sensor-Based Technology to Improve Construction Safety Management

PubMed Central

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-01-01

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061

Critical Drivers for Safety Culture: Examining Department of Energy and U.S. Army Operational Experiences - 12382

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowes, Elizabeth A.

2012-07-01

Evaluating operational incidents can provide a window into the drivers most critical to establishing and maintaining a strong safety culture, thereby minimizing the potential project risk associated with safety incidents. By examining U.S. Department of Energy (DOE) versus U.S. Army drivers in terms of regulatory and contract requirements, programs implemented to address the requirements, and example case studies of operational events, a view of the elements most critical to making a positive influence on safety culture is presented. Four case studies are used in this evaluation; two from DOE and two from U.S. Army experiences. Although the standards guiding operationsmore » at these facilities are different, there are many similarities in the level of hazards, as well as the causes and the potential consequences of the events presented. Two of the incidents examined, one from a DOE operation and the other from a U.S. Army facility, resulted in workers receiving chemical burns. The remaining two incidents are similar in that significant conduct of operations failures occurred resulting in high-level radioactive waste (in the case of the DOE facility) or chemical agent (in the case of the Army facility) being transferred outside of engineering controls. A review of the investigation reports for all four events indicates the primary causes to be failures in work planning leading to ineffective hazard evaluation and control, lack of procedure adherence, and most importantly, lack of management oversight to effectively reinforce expectations for safe work planning and execution. DOE and Army safety programs are similar, and although there are some differences in contractual requirements, the expectations for safe performance are essentially the same. This analysis concludes that instilling a positive safety culture comes down to management leadership and engagement to (1) cultivate an environment that values a questioning attitude and (2) continually reinforce expectations for the appropriate level of rigor in work planning and procedure adherence. A review of the root causes and key contributing causes to the events indicate: - Three of the four root cause analyses cite lack of management engagement (oversight, involvement, ability to recognize issues, etc.) as a root cause to the events. - Two of the four root cause analyses cite work planning failures as a root cause to the events and all cause analyses reflect work planning failures as contributing factors to the events. - All events with the exception of the Tuba City plant shutdown indicate procedure noncompliance as a key contributor; in the case of Tuba City the procedure issues were primarily related to a lack of procedures, or a lack of sufficiently detailed procedures. - All events included discussion or suggestion of a lack of a questioning attitude, either on the part of management/supervision, work planners, or workers. This analysis suggests that the most critical drivers to safety culture are: - Management engagement, - Effective work planning and procedures, and - Procedure adherence with a questioning attitude to ensure procedural problems are identified and fixed. In high-hazard operational environments the importance of robust work planning processes and procedure adherence cannot be overstated. However, having the processes by themselves is not enough. Management must actively engage in expectation setting and ensure work planning that meets expectations for hazard analysis and control, develop a culture that encourages incident reporting and a questioning attitude, and routinely observe work performance to reinforce expectations for adherence to procedures/work control documents. In conclusion, the most critical driver to achieving a workforce culture that supports safe and effective project performance can be summarized as follows: 'Management engagement to continually reinforce expectations for work planning processes and procedure adherence in an environment that cultivates a questioning attitude'. (authors)« less

Safety Evaluation Report for the Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3070)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-01-01

This report documents the US Nuclear Regulatory Commission (NRC) staff review and safety evaluation of the Louisiana Energy Services, L.P. (LES, the applicant) application for a license to possess and use byproduct, source, and special nuclear material and to enrich natural uranium to a maximum of 5 percent U-235 by the gas centrifuge process. The plant, to be known as the Claiborne Enrichment Center (CEC), would be constructed near the town of Homer in Claiborne Parish, Louisiana. At full production in a given year, the plant will receive approximately 4,700 tonnes of feed UF{sub 6} and produce 870 tonnes ofmore » low-enriched UF{sub 6}, and 3,830 tonnes of depleted UF{sub 6} tails. Facility construction, operation, and decommissioning are expected to last 5, 30, and 7 years, respectively. The objective of the review is to evaluate the potential adverse impacts of operation of the facility on worker and public health and safety under both normal operating and accident conditions. The review also considers the management organization, administrative programs, and financial qualifications provided to assure safe design and operation of the facility. The NRC staff concludes that the applicant`s descriptions, specifications, and analyses provide an adequate basis for safety review of facility operations and that construction and operation of the facility does not pose an undue risk to public health and safety.« less

CSHM: Web-based safety and health monitoring system for construction management.

PubMed

Cheung, Sai On; Cheung, Kevin K W; Suen, Henry C H

2004-01-01

This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.

Technical Support and Documentation Management for 25 Ton All Terrain Crane (ATEC).

DTIC Science & Technology

1991-03-11

Rationale Report * Market Investigation and Supplement " Technical Feasibility Test Having considered material contained in the above documents and...Operational issues will be evaluated by OTEC as observers to the qualification testing . A logistics demonstration will be conducted in parallel with PPQT...Organizational OSHA Occupational Safety and Health Administration D-1 APPENDIX D - LIST OF ACRONYMNS (Continued) OTEC Operational Test and Evaluation Command OTP

Labor unions and safety climate: perceived union safety values and retail employee safety outcomes.

PubMed

Sinclair, Robert R; Martin, James E; Sears, Lindsay E

2010-09-01

Although trade unions have long been recognized as a critical advocate for employee safety and health, safety climate research has not paid much attention to the role unions play in workplace safety. We proposed a multiple constituency model of workplace safety which focused on three central safety stakeholders: top management, ones' immediate supervisor, and the labor union. Safety climate research focuses on management and supervisors as key stakeholders, but has not considered whether employee perceptions about the priority their union places on safety contributes contribute to safety outcomes. We addressed this gap in the literature by investigating unionized retail employee (N=535) perceptions about the extent to which their top management, immediate supervisors, and union valued safety. Confirmatory factor analyses demonstrated that perceived union safety values could be distinguished from measures of safety training, workplace hazards, top management safety values, and supervisor values. Structural equation analyses indicated that union safety values influenced safety outcomes through its association with higher safety motivation, showing a similar effect as that of supervisor safety values. These findings highlight the need for further attention to union-focused measures related to workplace safety as well as further study of retail employees in general. We discuss the practical implications of our findings and identify several directions for future safety research. 2009 Elsevier Ltd. All rights reserved.

La Conchita Landslide Risk Assessment

NASA Astrophysics Data System (ADS)

Kropp, A.; Johnson, L.; Magnusen, W.; Hitchcock, C. S.

2009-12-01

Following the disastrous landslide in La Conchita in 2005 that resulted in ten deaths, the State of California selected our team to prepare a risk assessment for a committee of key stakeholders. The stakeholders represented the State of California, Ventura County, members of the La Conchita community, the railroad, and the upslope ranch owner (where the slide originated); a group with widely varying views and interests. Our team was charged with characterizing the major hazards, developing a series of mitigation concepts, evaluating the benefits and costs of mitigation, and gathering stakeholder input throughout the process. Two unique elements of the study were the methodologies utilized for the consequence assessment and for the decision-making framework. La Conchita is exposed to multiple slope hazards, each with differing geographical distributions, as well as depth and velocity characteristics. Three consequence matrices were developed so that the potential financial losses, structural vulnerabilities, and human safety exposure could be evaluated. The matrices utilized semi-quantitative loss evaluations (both financial and life safety) based on a generalized understanding of likely vulnerability and hazard characteristics. The model provided a quantitative estimate of cumulative losses over a 50-year period, including losses of life based on FEMA evaluation criteria. Conceptual mitigation options and loss estimates were developed to provide a range of risk management solutions that were feasible from a cost-benefit standpoint. A decision tree approach was adopted to focus on fundamental risk management questions rather than on specific outcomes since the committee did not have a consensus view on the preferred solution. These questions included: 1. Over what time period can risks be tolerated before implementation of decisions? 2. Whose responsibility is it to identify a workable risk management solution? 3. Who will own the project? The decision tree developed for assessment can also be used in the reverse direction to evaluate a project impasse or to evaluate owners and time-frames associated with a particular risk management outcome. Although the processes developed were specific to the La Conchita study, we believe that they are applicable elsewhere for localized multi-hazard assessments and/or committee-led risk management efforts.

Safety awareness, pilot education, and incident reporting programs

NASA Technical Reports Server (NTRS)

Enders, J.

1984-01-01

Education in safety awareness, pilot training, and accident reporting is discussed. Safety awareness and risk management are examined. Both quantitative and qualitive risk management are explored. Information dissemination on safety is considered.

76 FR 62035 - Privacy Act of 1974: Notice of Proposed Privacy Act System of Records Revision

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

... the purpose of the Radiation Safety Management System (RSMS). The RSMS was developed by the Radiation Safety Division, a component of USDA's DM, as a tool for the management of the USDA's radiation safety... USDA employees and the Radiation Safety Division (RSD) of USDA to manage information required by the...

The effectiveness of an e-learning program on pediatric medication safety for undergraduate students: a pretest-post-test intervention study.

PubMed

Lee, Tzu-Ying; Lin, Fang-Yi

2013-04-01

Safe medication management is a major competency taught in the nursing curriculum. However, administering pediatric medications is considered a common clinical stressor for Taiwanese students. A supplemental e-learning program that helps students fill the gap between basic nursing skills and pediatric knowledge on medication safety was developed. To evaluate the effectiveness of an e-learning program to increase pediatric medication management among students who take pediatric nursing courses. This intervention study used a historical comparison design. A university in Northern Taiwan. A total of 349 undergraduate nursing students who took pediatric nursing courses participated. Eighty students in the comparison group received regular pediatric courses, including the lectures and clinical practicum; 269 students in the intervention group received an e-learning program, in addition to the standard pediatric courses. Between February 2011 and July 2012 pediatric medication management, including pediatric medication knowledge and calculation ability, was measured at the beginning of the first class, at the completion of the lectures, and at the completion of the clinical practicum. The program was evaluated qualitatively and quantitatively. The intervention group had significantly higher pediatric medication management scores at completion of the lecture course and at the completion of the clinical practicum than the comparison group based on the first day of the lecture course, after adjusting for age, nursing program, and having graduated from a junior college in nursing. Overall, the students appreciated the program that included various teaching modalities content that related to the administration of medication. Using an e-learning program on pediatric medication management is an effective learning method in addition to sitting in a regular lecture course. The different emphases in each module, provided by experienced instructors, enabled the students to be more aware of their role in pediatric medication safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

New advances in models and strategies for developing anti-obesity drugs

PubMed Central

Kim, Gilbert W.; Lin, Jieru E.; Blomain, Erik S.; Waldman, Scott A.

2014-01-01

Introduction Obesity is a worldwide pandemic. Obesity-related health and economic costs are staggering. Existing strategies to combat obesity through lifestyle improvements and medical intervention have had limited success. Pharmacotherapy, in combination with lifestyle modification, may play a vital role in reversing the disease burden. However, past and current weight-loss medications have had serious safety risks, notably cardiovascular and psychiatric events. Areas covered We review the strategies for designing new anti-obesity drugs by describing those currently in development. We describe their target, mechanism of action, and developmental or regulatory status. We also discuss the problem of weight regain following weight loss, and its relevance to the long-term success of anti-obesity pharmacotherapy. Expert opinion For weight management drugs to achieve the safety and efficacy required to be impactful, current studies are uncovering and characterizing new targets, including new signaling circuits and hormones regulating appetite and metabolism, and re-evaluating the role of pharmacotherapy in weight management. To avoid the safety failures of many past weight-loss drugs, the models and strategies covered in this article incorporate recent advances in knowledge and technology. We discuss the emergence of cGMP signaling as a potentially transformative target in weight management. Modulating cGMP signaling may represent an ideal goal for an anti-obesity pharmacotherapy, reflecting some of the major themes described in the present review: targeting pathways that are newly realized as relevant for weight management; promoting safety by re-purposing drugs that are safe, proven, and approved for clinical use; and having a synergistic effect on multiple, reinforcing pathways. PMID:23621300

Failing to Fix What is Found: Risk Accommodation in the Oil and Gas Industry.

PubMed

Stackhouse, Madelynn R D; Stewart, Robert

2017-01-01

The present program of research synthesizes the findings from three studies in line with two goals. First, the present research explores how the oil and gas industry is performing at risk mitigation in terms of finding and fixing errors when they occur. Second, the present research explores what factors in the work environment relate to a risk-accommodating environment. Study 1 presents a descriptive evaluation of high-consequence incidents at 34 oil and gas companies over a 12-month period (N = 873), especially in terms of those companies' effectiveness at investigating and fixing errors. The analysis found that most investigations were fair in terms of quality (mean = 75.50%), with a smaller proportion that were weak (mean = 11.40%) or strong (mean = 13.24%). Furthermore, most companies took at least one corrective action for high-consequence incidents, but few of these corrective actions were confirmed as having been completed (mean = 13.77%). In fact, most corrective actions were secondary interim administrative controls (e.g., having a safety meeting) rather than fair or strong controls (e.g., training, engineering elimination). Study 2a found that several environmental factors explain the 56.41% variance in safety, including management's disengagement from safety concerns, finding and fixing errors, safety management system effectiveness, training, employee safety, procedures, and a production-over-safety culture. Qualitative results from Study 2b suggest that a compliance-based culture of adhering to liability concerns, out-group blame, and a production-over-safety orientation may all impede safety effectiveness. © 2016 Society for Risk Analysis.

A system safety model for developmental aircraft programs

NASA Technical Reports Server (NTRS)

Amberboy, E. J.; Stokeld, R. L.

1982-01-01

Basic tenets of safety as applied to developmental aircraft programs are presented. The integration of safety into the project management aspects of planning, organizing, directing and controlling is illustrated by examples. The basis for project management use of safety and the relationship of these management functions to 'real-world' situations is presented. The rationale which led to the safety-related project decision and the lessons learned as they may apply to future projects are presented.

USDOT guidance summary for connected vehicle deployments : safety management.

DOT National Transportation Integrated Search

2016-07-01

This document provides guidance material in regards to safety management plan for the CV Pilots DeploymentConcept Development Phase. This guidance provides key concepts and references in developing the SafetyManagement Plan in Task 4, lists relevant ...

Special Feature: Epistemological Paradigms in Evaluation: Implications for Practice. Section 1: "Paradigm Contrast" Case Studies.

ERIC Educational Resources Information Center

Rose, Tom; And Others

1991-01-01

This section presents two pragmatic studies focusing on a real-life situation and specific applications in managerial decision making. One study deals with improving occupational safety in a bedding manufacturing plant, whereas the other concentrates on managing a state mental health program. (SLD)

49 CFR 195.452 - Pipeline integrity management in high consequence areas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... engineering evaluation and provides an equivalent level of public safety and environmental protection. (c... situations—(i) Engineering basis. An operator may be able to justify an engineering basis for a longer assessment interval on a segment of line pipe. The justification must be supported by a reliable engineering...

User's manual for The TIM benefit-cost (TIM-BC) Tool (Version: 1.0.0)

DOT National Transportation Integrated Search

2015-07-04

This document serves as a users manual for the Traffic Incident Management Benefit-Cost Tool (TIM-BC) Version 1.0.0 - Safety Service Patrol Benefit-Cost (SSP-BC) Tool, which is used to assist State and local engineers and decisionmakers with evalu...

77 FR 56265 - Proposed Information Collection Submitted to the Office of Management and Budget (OMB); Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... the second experiment will evaluate the lack of effectiveness in current audible warnings designed to...: Title: Recruitment of human subjects for observational experiments regarding keyless ignition controls... motor vehicle safety standards (FMVSSs). Human factors observational experiments are proposed to support...

78 FR 77772 - Shipping Coordinating Committee; Notice of Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... (IMO) Sub-Committee on Pollution Prevention and Response (PPR) to be held at the IMO Headquarters... agenda --Decisions of other IMO bodies --Evaluation of safety and pollution hazards of liquid chemicals... management systems and reduction of atmospheric pollution --Consideration of the impact on the Arctic of...

The Challenges of Field Testing the Traffic Management Advisor (TMA) in an Operational Air Traffic Control Facility

NASA Technical Reports Server (NTRS)

Hoang, Ty; Swenson, Harry N.

1997-01-01

The Traffic Management Advisor (TMA), the sequence and schedule tool of the Center/TRACON Automation System (CTAS), was evaluated at the Fort Worth Center (ZFW) in the summer of 1996. This paper describes the challenges encountered during the various phases of the TMA field evaluation, which included system (hardware and software) installation, personnel training, and data collection. Operational procedures were developed and applied to the evaluation process that would ensure air safety. The five weeks of field evaluation imposed minimal impact on the hosting facility and provided valuable engineering and human factors data. The collection of data was very much an opportunistic affair, due to dynamic traffic conditions. One measure of the success of the TMA evaluation is that, rather than remove TMA after the evaluation until it could be fully implemented, the prototype TMA is in continual use at ZFW as the fully operational version is readied for implementation.

23 CFR 630.1106 - Policy and procedures for work zone safety management.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Policy and procedures for work zone safety management... Policy and procedures for work zone safety management. (a) Each agency's policy and processes, procedures... established in accordance with 23 CFR 630.1006, shall include the consideration and management of road user...

77 FR 34123 - Pipeline Safety: Public Meeting on Integrity Management of Gas Distribution Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0100] Pipeline Safety: Public Meeting on Integrity Management of Gas Distribution Pipelines AGENCY: Office of Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, DOT. ACTION...

Safety cost management in construction companies: A proposal classification.

PubMed

López-Alonso, M; Ibarrondo-Dávila, M P; Rubio, M C

2016-06-16

Estimating health and safety costs in the construction industry presents various difficulties, including the complexity of cost allocation, the inadequacy of data available to managers and the absence of an accounting model designed specifically for safety cost management. Very often, the costs arising from accidents in the workplace are not fully identifiable due to the hidden costs involved. This paper reviews some studies of occupational health and safety cost management and proposes a means of classifying these costs. We conducted an empirical study in which the health and safety costs of 40 construction worksites are estimated. A new classification of the health and safety cost and its categories is proposed: Safety and non-safety costs. The costs of the company's health and safety policy should be included in the information provided by the accounting system, as a starting point for analysis and control. From this perspective, a classification of health and safety costs and its categories is put forward.

The Perception, Level of Safety Satisfaction and Safety Feedback on Occupational Safety and Health Management among Hospital Staff Nurses in Sabah State Health Department.

PubMed

Cheah, Whye Lian; Giloi, Nelbon; Chang, Ching Thon; Lim, Jac Fang

2012-07-01

This study aimed to determine the perception and level of safety satisfaction of staff nurses with regards to Occupational Safety and Health (OSH) management practice in the Sabah Health Department, and to associate the OSH management dimensions, to Safety Satisfaction and Safety Feedback. A cross-sectional study using a validated self-administered questionnaire was conducted among randomly respondents. 135 nurses responded the survey. Mean (SD) score for each dimension ranged from 1.70 ± 0.68-4.04 ± 0.65, with Training and Competence dimension (mean [SD], 4.04 ± 0.65) had the highest while Safety Incidence was the least score (mean [SD], 1.70 ± 0.68). Both mean (SD) scores for Safety Satisfaction and Safety Feedback was high, 3.28 ± 0.51 and 3.57 ± 0.73, respectively. Pearson's correlation analysis indicated that all OSH dimensions had significant correlation with Safety Satisfaction and Safety Feedback (r coefficient ranged from 0.176-0.512) except for Safety Incidence. The overall perception of OSH management was rather low. Significant correlation between Safety Satisfaction and Safety Feedback and several dimensions, suggest that each organization to put in place the leaders who have appropriate leadership and supervisory skills and committed in providing staff training to improve staff's competency in OSH practice. In addition, clear goals, rules, and reporting system will help the organization to implement proper OSH management practice.

[Development and validation of the Korean patient safety culture scale for nursing homes].

PubMed

Yoon, Sook Hee; Kim, Byungsoo; Kim, Se Young

2013-06-01

The purpose of this study was to develop a tool to evaluate patient safety culture in nursing homes and to test its validity and reliability. A preliminary tool was developed through interviews with focus group, content validity tests, and a pilot study. A nationwide survey was conducted from February to April, 2011, using self-report questionnaires. Participants were 982 employees in nursing homes. Data were analyzed using Cronbach's alpha, item analysis, factor analysis, and multitrait/multi-Item analysis. From the results of the analysis, 27 final items were selected from 49 items on the preliminary tool. Items with low correlation with total scale were excluded. The 4 factors sorted by factor analysis contributed 63.4% of the variance in the total scale. The factors were labeled as leadership, organizational system, working attitude, management practice. Cronbach's alpha for internal consistency was .95 and the range for the 4 factors was from .86 to .93. The results of this study indicate that the Korean Patient Safety Culture Scale has reliability and validity and is suitable for evaluation of patient safety culture in Korean nursing homes.

ATD-1 Avionics Phase 2 Flight Test: Flight Test Operations and Saftey Report (FTOSR)

NASA Technical Reports Server (NTRS)

Boyle, Dan; Rein-Weston, Karl; Berckefeldt, Rick; Eggling, Helmuth; Stankiewicz, Craig; Silverman, George

2017-01-01

The Air Traffic Management Technology Demonstration-1 (ATD-1) is a major applied research and development activity of NASA's Airspace Operations and Safety Program (AOSP). The demonstration is the first of an envisioned series of Air Traffic Management (ATM) Technology Demonstration sub-projects that will demonstrate innovative NASA technologies that have attained a sufficient level of maturity to merit more in-depth research and evaluation at the system level in relevant environments.