Testing of a Program Evaluation Model: Final Report.

ERIC Educational Resources Information Center

Nagler, Phyllis J.; Marson, Arthur A.

A program evaluation model developed by Moraine Park Technical Institute (MPTI) is described in this report. Following background material, the four main evaluation criteria employed in the model are identified as program quality, program relevance to community needs, program impact on MPTI, and the transition and growth of MPTI graduates in the…

Accomplishments and challenges of surgical simulation.

PubMed

Satava, R M

2001-03-01

For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

Annotated bibliography of structural equation modelling: technical work.

PubMed

Austin, J T; Wolfle, L M

1991-05-01

Researchers must be familiar with a variety of source literature to facilitate the informed use of structural equation modelling. Knowledge can be acquired through the study of an expanding literature found in a diverse set of publishing forums. We propose that structural equation modelling publications can be roughly classified into two groups: (a) technical and (b) substantive applications. Technical materials focus on the procedures rather than substantive conclusions derived from applications. The focus of this article is the former category; included are foundational/major contributions, minor contributions, critical and evaluative reviews, integrations, simulations and computer applications, precursor and historical material, and pedagogical textbooks. After a brief introduction, we annotate 294 articles in the technical category dating back to Sewall Wright (1921).

Is Beauty in the Eyes of the Beholder? Aesthetic Quality versus Technical Skill in Movement Evaluation of Tai Chi.

PubMed

Zamparo, Paola; Zorzi, Elena; Marcantoni, Sara; Cesari, Paola

2015-01-01

The aim of this study was to compare experts to naïve practitioners in rating the beauty and the technical quality of a Tai Chi sequence observed in video-clips (of high and middle level performances). Our hypothesis are: i) movement evaluation will correlate with the level of skill expressed in the kinematics of the observed action but ii) only experts will be able to unravel the technical component from the aesthetic component of the observed action. The judgments delivered indicate that both expert and non-expert observers are able to discern a good from a mediocre performance; however, as expected, only experts discriminate the technical from the aesthetic component of the action evaluated and do this independently of the level of skill shown by the model (high or middle level performances). Furthermore, the judgments delivered were strongly related to the kinematic variables measured in the observed model, indicating that observers rely on specific movement kinematics (e.g. movement amplitude, jerk and duration) for action evaluation. These results provide evidence of the complementary functional role of visual and motor action representation in movement evaluation and underline the role of expertise in judging the aesthetic quality of movements.

Is Beauty in the Eyes of the Beholder? Aesthetic Quality versus Technical Skill in Movement Evaluation of Tai Chi

PubMed Central

2015-01-01

The aim of this study was to compare experts to naïve practitioners in rating the beauty and the technical quality of a Tai Chi sequence observed in video-clips (of high and middle level performances). Our hypothesis are: i) movement evaluation will correlate with the level of skill expressed in the kinematics of the observed action but ii) only experts will be able to unravel the technical component from the aesthetic component of the observed action. The judgments delivered indicate that both expert and non-expert observers are able to discern a good from a mediocre performance; however, as expected, only experts discriminate the technical from the aesthetic component of the action evaluated and do this independently of the level of skill shown by the model (high or middle level performances). Furthermore, the judgments delivered were strongly related to the kinematic variables measured in the observed model, indicating that observers rely on specific movement kinematics (e.g. movement amplitude, jerk and duration) for action evaluation. These results provide evidence of the complementary functional role of visual and motor action representation in movement evaluation and underline the role of expertise in judging the aesthetic quality of movements. PMID:26047473

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

NASA Astrophysics Data System (ADS)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Evaluating Social Causality and Responsibility Models: An Initial Report

DTIC Science & Technology

2005-01-01

ICT Technical Report ICT-TR-03-2005 Evaluating Social Causality and Responsibility ... social intelligent agents. In this report, we present a general computational model of social causality and responsibility , and empirical results of...2005 to 00-00-2005 4. TITLE AND SUBTITLE Evaluating Social Causality and Responsibility Models: An Initial Report 5a. CONTRACT NUMBER 5b. GRANT

Availability Control for Means of Transport in Decisive Semi-Markov Models of Exploitation Process

NASA Astrophysics Data System (ADS)

Migawa, Klaudiusz

2012-12-01

The issues presented in this research paper refer to problems connected with the control process for exploitation implemented in the complex systems of exploitation for technical objects. The article presents the description of the method concerning the control availability for technical objects (means of transport) on the basis of the mathematical model of the exploitation process with the implementation of the decisive processes by semi-Markov. The presented method means focused on the preparing the decisive for the exploitation process for technical objects (semi-Markov model) and after that specifying the best control strategy (optimal strategy) from among possible decisive variants in accordance with the approved criterion (criteria) of the activity evaluation of the system of exploitation for technical objects. In the presented method specifying the optimal strategy for control availability in the technical objects means a choice of a sequence of control decisions made in individual states of modelled exploitation process for which the function being a criterion of evaluation reaches the extreme value. In order to choose the optimal control strategy the implementation of the genetic algorithm was chosen. The opinions were presented on the example of the exploitation process of the means of transport implemented in the real system of the bus municipal transport. The model of the exploitation process for the means of transports was prepared on the basis of the results implemented in the real transport system. The mathematical model of the exploitation process was built taking into consideration the fact that the model of the process constitutes the homogenous semi-Markov process.

Air Quality Model Evaluation International Initiative (AQMEII) - Utrecht, Netherlands The May 8, 2012

EPA Science Inventory

The 4th workshop of the Air Quality Model Evaluation International Initiative (AQMEII) was held on May 8 in Utrecht, The Netherlands, in conjunction with the NATO/SPS International Technical Meeting on Air Pollution Modeling and Its Application. AQMEII was launched in 2009 as a l...

Brief Lags in Interrupted Sequential Performance: Evaluating a Model and Model Evaluation Method

DTIC Science & Technology

2015-01-05

rehearsal mechanism in the model. To evaluate the model we developed a simple new goodness-of-fit test based on analysis of variance that offers an...repeated step). Sequen- tial constraints are common in medicine, equipment maintenance, computer programming and technical support, data analysis ...legal analysis , accounting, and many other home and workplace environ- ments. Sequential constraints also play a role in such basic cognitive processes

A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

PubMed

de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

2013-12-01

To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

Crowdsourcing: a valid alternative to expert evaluation of robotic surgery skills.

PubMed

Polin, Michael R; Siddiqui, Nazema Y; Comstock, Bryan A; Hesham, Helai; Brown, Casey; Lendvay, Thomas S; Martino, Martin A

2016-11-01

Robotic-assisted gynecologic surgery is common, but requires unique training. A validated assessment tool for evaluating trainees' robotic surgery skills is Robotic-Objective Structured Assessments of Technical Skills. We sought to assess whether crowdsourcing can be used as an alternative to expert surgical evaluators in scoring Robotic-Objective Structured Assessments of Technical Skills. The Robotic Training Network produced the Robotic-Objective Structured Assessments of Technical Skills, which evaluate trainees across 5 dry lab robotic surgical drills. Robotic-Objective Structured Assessments of Technical Skills were previously validated in a study of 105 participants, where dry lab surgical drills were recorded, de-identified, and scored by 3 expert surgeons using the Robotic-Objective Structured Assessments of Technical Skills checklist. Our methods-comparison study uses these previously obtained recordings and expert surgeon scores. Mean scores per participant from each drill were separated into quartiles. Crowdworkers were trained and calibrated on Robotic-Objective Structured Assessments of Technical Skills scoring using a representative recording of a skilled and novice surgeon. Following this, 3 recordings from each scoring quartile for each drill were randomly selected. Crowdworkers evaluated the randomly selected recordings using Robotic-Objective Structured Assessments of Technical Skills. Linear mixed effects models were used to derive mean crowdsourced ratings for each drill. Pearson correlation coefficients were calculated to assess the correlation between crowdsourced and expert surgeons' ratings. In all, 448 crowdworkers reviewed videos from 60 dry lab drills, and completed a total of 2517 Robotic-Objective Structured Assessments of Technical Skills assessments within 16 hours. Crowdsourced Robotic-Objective Structured Assessments of Technical Skills ratings were highly correlated with expert surgeon ratings across each of the 5 dry lab drills (r ranging from 0.75-0.91). Crowdsourced assessments of recorded dry lab surgical drills using a validated assessment tool are a rapid and suitable alternative to expert surgeon evaluation. Copyright © 2016 Elsevier Inc. All rights reserved.

77 FR 58421 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... Ventilation System Surveillance Requirements To Operate for 10 Hours per Month,'' Using the Consolidated Line... currently require operating the ventilation system for at least 10 continuous hours with the heaters... Technical Specifications (TSs) Task Force (TSTF) Traveler TSTF-522, Revision 0, ``Revise Ventilation System...

Technical Assistance to Early Interventionists in Rural Areas: An Empirical Evaluation.

ERIC Educational Resources Information Center

Cooper, Carolyn S.; McEvoy, Mary A.

This study assessed the effectiveness of a model for providing long distance technical assistance on teacher implementation of an intervention designed to increase child-child social interaction. Subjects were 10 preschool special education teachers and 40 preschool-aged children (some developing normally and some with mild to moderate…

Removal of Retrievable Self-Expandable Metallic Tracheobronchial Stents: An 18-Year Experience in a Single Center.

PubMed

Park, Jung-Hoon; Kim, Pyeong Hwa; Shin, Ji Hoon; Tsauo, Jiaywei; Kim, Min Tae; Cho, Young Chul; Kim, Jin Hyoung; Song, Ho-Young

2016-11-01

The purpose of the study was to retrospectively evaluate the technical outcomes of removal of retrievable self-expandable metallic stents (REMSs) and identify predictors of technical failure in 81 patients with benign and malignant tracheobronchial strictures. A total of 98 REMSs were removed under fluoroscopic guidance in 81 patients with benign (n = 48) or malignant (n = 33) tracheobronchial strictures. Primary and secondary technical success rates and complication rate were evaluated. Technical outcomes with regard to underlying diseases were also evaluated. Logistic regression models were constructed to identify predictors of primary technical success. Primary and secondary technical success rates were 86.7 and 94.9 %, respectively. Stent removal-related complication rate was 7.1 % (7/98) and all were bleeding after stent removal. All bleeding complications were minor and managed conservatively. Primary technical success rate for benign strictures was significantly lower compared with that for malignant strictures (80.9 vs. 97.1 %, P = 0.029), but secondary technical success rate (93.7 vs. 97.1 %, P = 0.652) did not differ between the two groups. Granulation tissue formation was identified as an independent predictor of primary technical success (odds ratio 0.249, 95 % CI 0.071-0.874, P = 0.030). Removal of REMSs in patients with benign and malignant tracheobronchial strictures is safe and technically feasible. Bronchoscopic guidance may be required when the removal using a hook wire fails. The presence of granulation tissue was the negative predictor of primary technical success.

Evaluation of Vocational Technical Education. Phase II. A Skeletal Model with Suggested Research and Development Activities.

ERIC Educational Resources Information Center

New Educational Directions, Crawfordsville, IN.

Phase 2 of this project presents a skeletal model for evaluating vocational education programs which can be applied to secondary, post-secondary, and adult education programs. The model addresses 13 main components of the vocational education system: descriptive information, demonstration of need, student recruitment and selection, curriculum,…

A new global and comprehensive model for ICU ventilator performances evaluation.

PubMed

Marjanovic, Nicolas S; De Simone, Agathe; Jegou, Guillaume; L'Her, Erwan

2017-12-01

This study aimed to provide a new global and comprehensive evaluation of recent ICU ventilators taking into account both technical performances and ergonomics. Six recent ICU ventilators were evaluated. Technical performances were assessed under two FIO 2 levels (100%, 50%), three respiratory mechanics combinations (Normal: compliance [C] = 70 mL cmH 2 O -1 /resistance [R] = 5 cmH 2 O L -1  s -1 ; Restrictive: C = 30/R = 10; Obstructive: C = 120/R = 20), four exponential levels of leaks (from 0 to 12.5 L min -1 ) and three levels of inspiratory effort (P0.1 = 2, 4 and 8 cmH 2 O), using an automated test lung. Ergonomics were evaluated by 20 ICU physicians using a global and comprehensive model involving physiological response to stress measurements (heart rate, respiratory rate, tidal volume variability and eye tracking), psycho-cognitive scales (SUS and NASA-TLX) and objective tasks completion. Few differences in terms of technical performance were observed between devices. Non-invasive ventilation modes had a huge influence on asynchrony occurrence. Using our global model, either objective tasks completion, psycho-cognitive scales and/or physiological measurements were able to depict significant differences in terms of devices' usability. The level of failure that was observed with some devices depicted the lack of adaptation of device's development to end users' requests. Despite similar technical performance, some ICU ventilators exhibit low ergonomics performance and a high risk of misusage.

Determining the Effectiveness and Evaluating the Implementation Process of a Quality/Performance Circles System Model to Assist in Institutional Decision Making and Problem Solving at Lakeshore Technical Institute.

ERIC Educational Resources Information Center

Ladwig, Dennis J.

During the 1982-83 school year, a quality/performance circles system model was implemented at Lakeshore Technical Institute (LTI) to promote greater participation by staff in decision making and problem solving. All management staff at the college (N=45) were invited to participate in the process, and 39 volunteered. Non-management staff (N=240)…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anastasia M. Gribik; Ronald E. Mizia; Harry Gatley

This project addresses both the technical and economic feasibility of replacing industrial gas in lime kilns with synthesis gas from the gasification of hog fuel. The technical assessment includes a materials evaluation, processing equipment needs, and suitability of the heat content of the synthesis gas as a replacement for industrial gas. The economic assessment includes estimations for capital, construction, operating, maintenance, and management costs for the reference plant. To perform these assessments, detailed models of the gasification and lime kiln processes were developed using Aspen Plus. The material and energy balance outputs from the Aspen Plus model were used asmore » inputs to both the material and economic evaluations.« less

Research on artistic gymnastics training guidance model

NASA Astrophysics Data System (ADS)

Luo, Lin; Sun, Xianzhong

2017-04-01

Rhythmic gymnastics training guidance model, taking into consideration the features of artistic gymnastics training, is put forward to help gymnasts identify their deficiencies and unskilled technical movements and improve their training effects. The model is built on the foundation of both physical quality indicator model and artistic gymnastics training indicator model. Physical quality indicator model composed of bodily factor, flexibility-strength factor and speed-dexterity factor delivers an objective evaluation with reference to basic sport testing data. Training indicator model, based on physical fitness indicator, helps analyze the technical movements, through which the impact from each bodily factor on technical movements is revealed. AG training guidance model, in further combination with actual training data and in comparison with the data shown in the training indicator model, helps identify the problems in trainings, and thus improve the training effect. These three models when in combined use and in comparison with historical model data can check and verify the improvement in training effect over a certain period of time.

AERA Statement on Use of Value-Added Models (VAM) for the Evaluation of Educators and Educator Preparation Programs

ERIC Educational Resources Information Center

Educational Researcher, 2015

2015-01-01

The purpose of this statement is to inform those using or considering the use of value-added models (VAM) about their scientific and technical limitations in the evaluation of educators and programs that prepare teachers. The statement briefly reviews the background and current context of using VAM for evaluations, enumerates specific psychometric…

Evaluating a technical university's placement test using the Rasch measurement model

NASA Astrophysics Data System (ADS)

Salleh, Tuan Salwani; Bakri, Norhayati; Zin, Zalhan Mohd

2016-10-01

This study discusses the process of validating a mathematics placement test at a technical university. The main objective is to produce a valid and reliable test to measure students' prerequisite knowledge to learn engineering technology mathematics. It is crucial to have a valid and reliable test as the results will be used in a critical decision making to assign students into different groups of Technical Mathematics 1. The placement test which consists of 50 mathematics questions were tested on 82 new diplomas in engineering technology students at a technical university. This study employed rasch measurement model to analyze the data through the Winsteps software. The results revealed that there are ten test questions lower than less able students' ability. Nevertheless, all the ten questions satisfied infit and outfit standard values. Thus, all the questions can be reused in the future placement test at the technical university.

Development of speed models for improving travel forecasting and highway performance evaluation : [technical summary].

DOT National Transportation Integrated Search

2013-12-01

Travel forecasting models predict travel demand based on the present transportation system and its use. Transportation modelers must develop, validate, and calibrate models to ensure that predicted travel demand is as close to reality as possible. Mo...

DairyWise, a whole-farm dairy model.

PubMed

Schils, R L M; de Haan, M H A; Hemmer, J G A; van den Pol-van Dasselaar, A; de Boer, J A; Evers, A G; Holshof, G; van Middelkoop, J C; Zom, R L G

2007-11-01

A whole-farm dairy model was developed and evaluated. The DairyWise model is an empirical model that simulated technical, environmental, and financial processes on a dairy farm. The central component is the FeedSupply model that balanced the herd requirements, as generated by the DairyHerd model, and the supply of homegrown feeds, as generated by the crop models for grassland and corn silage. The output of the FeedSupply model was used as input for several technical, environmental, and economic submodels. The submodels simulated a range of farm aspects such as nitrogen and phosphorus cycling, nitrate leaching, ammonia emissions, greenhouse gas emissions, energy use, and a financial farm budget. The final output was a farm plan describing all material and nutrient flows and the consequences on the environment and economy. Evaluation of DairyWise was performed with 2 data sets consisting of 29 dairy farms. The evaluation showed that DairyWise was able to simulate gross margin, concentrate intake, nitrogen surplus, nitrate concentration in ground water, and crop yields. The variance accounted for ranged from 37 to 84%, and the mean differences between modeled and observed values varied between -5 to +3% per set of farms. We conclude that DairyWise is a powerful tool for integrated scenario development and evaluation for scientists, policy makers, extension workers, teachers and farmers.

Design and Evaluation of Scour for Bridges Using HEC-18 : technical brief.

DOT National Transportation Integrated Search

2017-07-01

This project developed a new approach for evaluating erosive scour at New Jersey bridges over non-tidal waterways. The main deliverable was the Scour Evaluation Model (SEM), which offers new analysis procedures, while still retaining the applicable p...

Removal of Retrievable Self-Expandable Metallic Tracheobronchial Stents: An 18-Year Experience in a Single Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Jung-Hoon; Kim, Pyeong Hwa; Shin, Ji Hoon, E-mail: jhshin@amc.seoul.kr

2016-11-15

PurposeThe purpose of the study was to retrospectively evaluate the technical outcomes of removal of retrievable self-expandable metallic stents (REMSs) and identify predictors of technical failure in 81 patients with benign and malignant tracheobronchial strictures.Materials and MethodsA total of 98 REMSs were removed under fluoroscopic guidance in 81 patients with benign (n = 48) or malignant (n = 33) tracheobronchial strictures. Primary and secondary technical success rates and complication rate were evaluated. Technical outcomes with regard to underlying diseases were also evaluated. Logistic regression models were constructed to identify predictors of primary technical success.ResultsPrimary and secondary technical success rates were 86.7 and 94.9 %, respectively.more » Stent removal-related complication rate was 7.1 % (7/98) and all were bleeding after stent removal. All bleeding complications were minor and managed conservatively. Primary technical success rate for benign strictures was significantly lower compared with that for malignant strictures (80.9 vs. 97.1 %, P = 0.029), but secondary technical success rate (93.7 vs. 97.1 %, P = 0.652) did not differ between the two groups. Granulation tissue formation was identified as an independent predictor of primary technical success (odds ratio 0.249, 95 % CI 0.071–0.874, P = 0.030).ConclusionRemoval of REMSs in patients with benign and malignant tracheobronchial strictures is safe and technically feasible. Bronchoscopic guidance may be required when the removal using a hook wire fails. The presence of granulation tissue was the negative predictor of primary technical success.« less

Preliminary design specifications of a calcium model

NASA Technical Reports Server (NTRS)

1978-01-01

A list of objectives, requirements, and guidelines are given for a calcium model. Existing models are reviewed and evaluated in relation to the stated objectives and requirements. The reviewed models were either too abstract or apparently invalidated. A technical approach to the design of a desirable model is identified.

Modeling Quantum Teleportation with Quantum Tools in Python (QuTiP)

DTIC Science & Technology

2017-12-01

FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) December 2017 2. REPORT TYPE Technical Report 3. DATES COVERED (From - To) June 1, 2017... technical report we evaluate one in particular, the Quantum Tools in Python (QuTiP) package, to determine its suitability for use in the simulation of...found that QuTiP is technically sound in that it is able to reproduce several published findings, and that it saves significant program design time due

Tech Prep Compendium of Models. [Revised].

ERIC Educational Resources Information Center

Delaware Technical and Community Coll., Dover.

This publication discusses four models for technical preparation (tech prep): program organization; student progress; tech prep data collection and evaluation model; and school/community. The program organization model is divided into four sections. Section I, the business industry, and labor section, shows the flow from craft committee and…

Virtual expansion of the technical vision system for smart vehicles based on multi-agent cooperation model

NASA Astrophysics Data System (ADS)

Krapukhina, Nina; Senchenko, Roman; Kamenov, Nikolay

2017-12-01

Road safety and driving in dense traffic flows poses some challenges in receiving information about surrounding moving object, some of which can be in the vehicle's blind spot. This work suggests an approach to virtual monitoring of the objects in a current road scene via a system with a multitude of cooperating smart vehicles exchanging information. It also describes the intellectual agent model, and provides methods and algorithms of identifying and evaluating various characteristics of moving objects in video flow. Authors also suggest ways for integrating the information from the technical vision system into the model with further expansion of virtual monitoring for the system's objects. Implementation of this approach can help to expand the virtual field of view for a technical vision system.

48 CFR 315.307 - Proposal revisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... appropriate; and (2) An evaluation of technical factors by the technical evaluation panel, as necessary. The technical evaluation panel may rescore and re-rank technical proposals in the competitive range and prepare a technical evaluation report. To the extent practicable, the same evaluators who reviewed the...

The Streambank Erosion Control Evaluation and Demonstration Act of 1974, Section 32, Public Law 93-251. Appendix A. Literature Survey.

DTIC Science & Technology

1981-12-01

Creek, Russian River Basin, Sonoma County , California; Hydraulic Model Investigation," Technical Report H-73-3, U. S. Army Engineer Waterways Experiment...Springs Dam, Dry Creek, Russian River Basin, Sonoma County , Cali- fornia; Hydraulic Model Investigation," Technical Report H-73-3, U. S. Army Engineer...Structures Ables, J. H., Jr., and Pickering, G. A. 1973 (Feb). "Outlet Works, 0 Warm Springs Dam, Dry Creek, Russian River Basin, Sonoma County , Cali

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

A formative evaluation of a coach-based technical assistance model for youth- and family-focused programming.

PubMed

Olson, Jonathan R; McCarthy, Kimberly J; Perkins, Daniel F; Borden, Lynne M

2018-04-01

The Children, Youth, and Families At-Risk (CYFAR) initiative provides funding and technical support for local community-based programs designed to promote positive outcomes among vulnerable populations. In 2013, CYFAR implemented significant changes in the way it provides technical assistance (TA) to grantees. These changes included introducing a new TA model in which trained coaches provide proactive support that is tailored to individual CYFAR projects. The purpose of this paper is to describe the evolution of this TA model and present preliminary findings from a formative evaluation. CYFAR Principal Investigators (PIs) were invited to respond to online surveys in 2015 and 2016. The surveys were designed to assess PI attitudes towards the nature and quality of support that they receive from their coaches. CYFAR PIs reported that their coaches have incorporated a range of coaching skills and techniques into their work. PIs have generally positive attitudes towards their coaches, and these attitudes have become more positive over time. Results suggest that CYFAR PIs have been generally supportive of the new TA system. Factors that may have facilitated support include a strong emphasis on team-building and the provision of specific resources that support program design, implementation, and evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

PubMed

Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

2017-07-01

Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Bridges Dynamic Parameters Identification Based On Experimental and Numerical Method Comparison in Regard with Traffic Seismicity

NASA Astrophysics Data System (ADS)

Krkošková, Katarína; Papán, Daniel; Papánová, Zuzana

2017-10-01

The technical seismicity negatively affects the environment, buildings and structures. Technical seismicity means seismic shakes caused by force impulse, random process and unnatural origin. The vibration influence on buildings is evaluated in the Eurocode 8 in Slovak Republic, however, the Slovak Technical Standard STN 73 0036 includes solution of the technical seismicity. This standard also classes bridges into the group of structures that are significant in light of the technical seismicity - the group “U”. Using the case studies analysis by FEM simulation and comparison is necessary because of brief norm evaluation of this issue. In this article, determinate dynamic parameters by experimental measuring and numerical method on two real bridges are compared. First bridge, (D201 - 00) is Scaffold Bridge on the road I/11 leading to the city of Čadca and is situated in the city of Žilina. It is eleven - span concrete road bridge. The railway is the obstacle, which this bridge spans. Second bridge (M5973 Brodno) is situated in the part of Žilina City on the road of I/11. It is concrete three - span road bridge built as box girder. The computing part includes 3D computational models of the bridges. First bridge (D201 - 00) was modelled in the software of IDA Nexis as the slab - wall model. The model outputs are natural frequencies and natural vibration modes. Second bridge (M5973 Brodno) was modelled in the software of VisualFEA. The technical seismicity corresponds with the force impulse, which was put into this model. The model outputs are vibration displacements, velocities and accelerations. The aim of the experiments was measuring of the vibration acceleration time record of bridges, and there was need to systematic placement of accelerometers. The vibration acceleration time record is important during the under - bridge train crossing, about the first bridge (D201 - 00) and the vibration acceleration time domain is important during deducing the force impulse under the bridge, about second bridge (M5973 Brodno). The analysis was done in the software of Sigview. About the first bridge (D201 - 00), the analysis output were values of power spectral density adherent to the frequencies values. These frequencies were compared with the natural frequencies values from the computational model whereby the technical seismicity influence on bridge natural frequencies was found out. About the second bridge (M5973 Brodno), the Sigview display of recorded vibration velocity time history was compared with the final vibration velocity time history from the computational model, whereby the results were incidental.

Quality Control in Title I Evaluation: Problems and Approaches.

ERIC Educational Resources Information Center

Hansen, Joe B.

Educational program evalaution is subject to many difficulties. Problems with evaluation include such conceptual problems as: (1) understanding of decisions to be made; (2) adequate definition; (3) consensus on values and criteria; (4) coordination among administrative levels; and (5) use of an appropriate evaluation model. Technical problems…

Evaluation of Cost Leadership Strategy in Shipping Enterprises with Simulation Model

NASA Astrophysics Data System (ADS)

Ferfeli, Maria V.; Vaxevanou, Anthi Z.; Damianos, Sakas P.

2009-08-01

The present study will attempt the evaluation of cost leadership strategy that prevails in certain shipping enterprises and the creation of simulation models based on strategic model STAIR. The above model is an alternative method of strategic applications evaluation. This is held in order to be realised if the strategy of cost leadership creates competitive advantage [1] and this will be achieved via the technical simulation which appreciates the interactions between the operations of an enterprise and the decision-making strategy in conditions of uncertainty with reduction of undertaken risk.

Energy retrofit of an office building by substitution of the generation system: performance evaluation via dynamic simulation versus current technical standards

NASA Astrophysics Data System (ADS)

Testi, D.; Schito, E.; Menchetti, E.; Grassi, W.

2014-11-01

Constructions built in Italy before 1945 (about 30% of the total built stock) feature low energy efficiency. Retrofit actions in this field can lead to valuable energetic and economic savings. In this work, we ran a dynamic simulation of a historical building of the University of Pisa during the heating season. We firstly evaluated the energy requirements of the building and the performance of the existing natural gas boiler, validated with past billings of natural gas. We also verified the energetic savings obtainable by the substitution of the boiler with an air-to-water electrically-driven modulating heat pump, simulated through a cycle-based model, evaluating the main economic metrics. The cycle-based model of the heat pump, validated with manufacturers' data available only at specified temperature and load conditions, can provide more accurate results than the simplified models adopted by current technical standards, thus increasing the effectiveness of energy audits.

Ultraviolet spectrometer and polarimeter (UVSP) software development and hardware tests for the solar maximum mission

NASA Technical Reports Server (NTRS)

Bruner, M. E.; Haisch, B. M.

1986-01-01

The Ultraviolet Spectrometer/Polarimeter Instrument (UVSP) for the Solar Maximum Mission (SMM) was based on the re-use of the engineering model of the high resolution ultraviolet spectrometer developed for the OSO-8 mission. Lockheed assumed four distinct responsibilities in the UVSP program: technical evaluation of the OSO-8 engineering model; technical consulting on the electronic, optical, and mechanical modifications to the OSO-8 engineering model hardware; design and development of the UVSP software system; and scientific participation in the operations and analysis phase of the mission. Lockheed also provided technical consulting and assistance with instrument hardware performance anomalies encountered during the post launch operation of the SMM observatory. An index to the quarterly reports delivered under the contract are contained, and serves as a useful capsule history of the program activity.

Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model

PubMed Central

Saul, Katherine R.; Hu, Xiao; Goehler, Craig M.; Vidt, Meghan E.; Daly, Melissa; Velisar, Anca; Murray, Wendy M.

2014-01-01

Several opensource or commercially available software platforms are widely used to develop dynamic simulations of movement. While computational approaches are conceptually similar across platforms, technical differences in implementation may influence output. We present a new upper limb dynamic model as a tool to evaluate potential differences in predictive behavior between platforms. We evaluated to what extent differences in technical implementations in popular simulation software environments result in differences in kinematic predictions for single and multijoint movements using EMG- and optimization-based approaches for deriving control signals. We illustrate the benchmarking comparison using SIMM-Dynamics Pipeline-SD/Fast and OpenSim platforms. The most substantial divergence results from differences in muscle model and actuator paths. This model is a valuable resource and is available for download by other researchers. The model, data, and simulation results presented here can be used by future researchers to benchmark other software platforms and software upgrades for these two platforms. PMID:24995410

Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model.

PubMed

Saul, Katherine R; Hu, Xiao; Goehler, Craig M; Vidt, Meghan E; Daly, Melissa; Velisar, Anca; Murray, Wendy M

2015-01-01

Several opensource or commercially available software platforms are widely used to develop dynamic simulations of movement. While computational approaches are conceptually similar across platforms, technical differences in implementation may influence output. We present a new upper limb dynamic model as a tool to evaluate potential differences in predictive behavior between platforms. We evaluated to what extent differences in technical implementations in popular simulation software environments result in differences in kinematic predictions for single and multijoint movements using EMG- and optimization-based approaches for deriving control signals. We illustrate the benchmarking comparison using SIMM-Dynamics Pipeline-SD/Fast and OpenSim platforms. The most substantial divergence results from differences in muscle model and actuator paths. This model is a valuable resource and is available for download by other researchers. The model, data, and simulation results presented here can be used by future researchers to benchmark other software platforms and software upgrades for these two platforms.

An Evaluation of the Hazard Prediction and Assessment Capability (HPAC) Software’s Ability to Model the Chornobyl Accident

DTIC Science & Technology

2002-03-01

source term. Several publications provided a thorough accounting of the accident, including “ Chernobyl Record” [Mould], and the NRC technical report...Report on the Accident at the Chernobyl Nuclear Power Station” [NUREG-1250]. The most comprehensive study of transport models to predict the...from the Chernobyl Accident: The ATMES Report” [Klug, et al.]. The Atmospheric Transport 5 Model Evaluation Study (ATMES) report used data

Technical Analysis of Teacher Responses to the Self-Evaluation Scale-Teacher (SES-T) Version

ERIC Educational Resources Information Center

Erford, Bradley T.; Lowe, Samantha; Chang, Catherine Y.

2011-01-01

The Self-Evaluation Scale--Teacher version, used to assess teacher perceived self-esteem of students, was analyzed. A unidimensional model emerged from exploratory factor analysis, with cautious acceptance of data fit. Reliability and external aspects of validity were supported by the Self-Evaluation Scale--Teacher data.

78 FR 29338 - Applications for New Award; Technical Assistance To Improve State Data Capacity-National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... formative and summative evaluations of the project; Note: The following Web site provides more information... plan, linked to the project's logic model, for a formative evaluation of the project's activities. The plan must describe how the formative evaluation will use clear performance objectives to ensure...

Washington's Community and Technical Colleges' Student Achievement Initiative: Lessons Learned since the 2012 Revision and Considerations for New Allocation Model. Research Report 16-1

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2016

2016-01-01

In January 2012, a system-wide task force came together for a nearly year-long process of revising the community and technical college system's performance-based funding (PBF) system, the Student Achievement Initiative. This review was consistent with national experts' recommendations for continuous evaluation of PBF systems to ensure overall…

Evaluating and Improving Cloud Processes in the Multi-Scale Modeling Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ackerman, Thomas P.

2015-03-01

The research performed under this grant was intended to improve the embedded cloud model in the Multi-scale Modeling Framework (MMF) for convective clouds by using a 2-moment microphysics scheme rather than the single moment scheme used in all the MMF runs to date. The technical report and associated documents describe the results of testing the cloud resolving model with fixed boundary conditions and evaluation of model results with data. The overarching conclusion is that such model evaluations are problematic because errors in the forcing fields control the results so strongly that variations in parameterization values cannot be usefully constrained

Physical Modeling of the Polyfrequency Filter-Compensating Device Based on the Capacitor-Coil

NASA Astrophysics Data System (ADS)

Butyrin, P. A.; Gusev, G. G.; Mikheev, D. V.; Shakirzianov, F. N.

2017-12-01

The paper presents the results of physical modeling and experimental study of the frequency characteristics of the polyfrequency filter-compensating device (PFCD) based on a capacitor-coil. The amplitude- frequency and phase-frequency characteristics of the physical PFCD model were constructed and its equivalent parameters were identified. The feasibility of a PFCD in the form of a single technical device with high technical and economic characteristics was experimentally proven. In the paper, recommendations for practical applications of the capacitor-coil-based PFCD are made and the advantages of the device over known standard passive filter-compensating devices are evaluated.

Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty.

PubMed

Flores-Alsina, Xavier; Rodríguez-Roda, Ignasi; Sin, Gürkan; Gernaey, Krist V

2008-11-01

The evaluation of activated sludge control strategies in wastewater treatment plants (WWTP) via mathematical modelling is a complex activity because several objectives; e.g. economic, environmental, technical and legal; must be taken into account at the same time, i.e. the evaluation of the alternatives is a multi-criteria problem. Activated sludge models are not well characterized and some of the parameters can present uncertainty, e.g. the influent fractions arriving to the facility and the effect of either temperature or toxic compounds on the kinetic parameters, having a strong influence in the model predictions used during the evaluation of the alternatives and affecting the resulting rank of preferences. Using a simplified version of the IWA Benchmark Simulation Model No. 2 as a case study, this article shows the variations in the decision making when the uncertainty in activated sludge model (ASM) parameters is either included or not during the evaluation of WWTP control strategies. This paper comprises two main sections. Firstly, there is the evaluation of six WWTP control strategies using multi-criteria decision analysis setting the ASM parameters at their default value. In the following section, the uncertainty is introduced, i.e. input uncertainty, which is characterized by probability distribution functions based on the available process knowledge. Next, Monte Carlo simulations are run to propagate input through the model and affect the different outcomes. Thus (i) the variation in the overall degree of satisfaction of the control objectives for the generated WWTP control strategies is quantified, (ii) the contributions of environmental, legal, technical and economic objectives to the existing variance are identified and finally (iii) the influence of the relative importance of the control objectives during the selection of alternatives is analyzed. The results show that the control strategies with an external carbon source reduce the output uncertainty in the criteria used to quantify the degree of satisfaction of environmental, technical and legal objectives, but increasing the economical costs and their variability as a trade-off. Also, it is shown how a preliminary selected alternative with cascade ammonium controller becomes less desirable when input uncertainty is included, having simpler alternatives more chance of success.

[Acoustic conditions in open plan office - Application of technical measures in a typical room].

PubMed

Mikulski, Witold

2018-03-09

Noise in open plan offices should not exceed acceptable levels for the hearing protection. Its major negative effects on employees are nuisance and impediment in execution of work. Specific technical solutions should be introduced to provide proper acoustic conditions for work performance. Acoustic evaluation of a typical open plan office was presented in the article published in "Medycyna Pracy" 5/2016. None of the rooms meets all the criteria, therefore, in this article one of the rooms was chosen to apply different technical solutions to check the possibility of reaching proper acoustic conditions. Acoustic effectiveness of those solutions was verified by means of digital simulation. The model was checked by comparing the results of measurements and calculations before using simulation. The analyzis revealed that open plan offices supplemented with signals for masking speech signals can meet all the required criteria. It is relatively easy to reach proper reverberation time (i.e., sound absorption). It is more difficult to reach proper values of evaluation parameters determined from A-weighted sound pressure level (SPLA) of speech. The most difficult is to provide proper values of evaluation parameters determined from speech transmission index (STI). Finally, it is necessary (besides acoustic treatment) to use devices for speech masking. The study proved that it is technically possible to reach proper acoustic condition. Main causes of employees complaints in open plan office are inadequate acoustic work conditions. Therefore, it is necessary to apply specific technical solutions - not only sound absorbing suspended ceiling and high acoustic barriers, but also devices for speech masking. Med Pr 2018;69(2):153-165. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Fossil Energy Program

NASA Astrophysics Data System (ADS)

McNeese, L. E.

1981-01-01

Increased utilization of coal and other fossil fuel alternatives as sources of clean energy is reported. The following topics are discussed: coal conversion development, chemical research and development, materials technology, component development and process evaluation studies, technical support to major liquefaction projects, process analysis and engineering evaluations, fossil energy environmental analysis, flue gas desulfurization, solid waste disposal, coal preparation waste utilization, plant control development, atmospheric fluidized bed coal combustor for cogeneration, TVA FBC demonstration plant program technical support, PFBC systems analysis, fossil fuel applications assessments, performance assurance system support for fossil energy projects, international energy technology assessment, and general equilibrium models of liquid and gaseous fuel supplies.

Distributional Cost-Effectiveness Analysis

PubMed Central

Asaria, Miqdad; Griffin, Susan; Cookson, Richard

2015-01-01

Distributional cost-effectiveness analysis (DCEA) is a framework for incorporating health inequality concerns into the economic evaluation of health sector interventions. In this tutorial, we describe the technical details of how to conduct DCEA, using an illustrative example comparing alternative ways of implementing the National Health Service (NHS) Bowel Cancer Screening Programme (BCSP). The 2 key stages in DCEA are 1) modeling social distributions of health associated with different interventions, and 2) evaluating social distributions of health with respect to the dual objectives of improving total population health and reducing unfair health inequality. As well as describing the technical methods used, we also identify the data requirements and the social value judgments that have to be made. Finally, we demonstrate the use of sensitivity analyses to explore the impacts of alternative modeling assumptions and social value judgments. PMID:25908564

Technical Path Evaluation for High Efficiency, Low Emission Natural Gas Engine

DTIC Science & Technology

2002-05-01

Modeling and Mitigation for Large Bore Natural Gas Engines C. Evaluation of Technologies for Achieving High BMEP Levels in Natural Gas Engines D. Microfine ...Natural Gas Engines C. Evaluation of Technologies for Achieving High BMEP Levels in Natural Gas Engines D. Microfine Water Spray Injection for Knock...91 vi D. MICROFINE WATER SPRAY INJECTION FOR

Simulated linear test applied to quantitative proteomics.

PubMed

Pham, T V; Jimenez, C R

2016-09-01

Omics studies aim to find significant changes due to biological or functional perturbation. However, gene and protein expression profiling experiments contain inherent technical variation. In discovery proteomics studies where the number of samples is typically small, technical variation plays an important role because it contributes considerably to the observed variation. Previous methods place both technical and biological variations in tightly integrated mathematical models that are difficult to adapt for different technological platforms. Our aim is to derive a statistical framework that allows the inclusion of a wide range of technical variability. We introduce a new method called the simulated linear test, or the s-test, that is easy to implement and easy to adapt for different models of technical variation. It generates virtual data points from the observed values according to a pre-defined technical distribution and subsequently employs linear modeling for significance analysis. We demonstrate the flexibility of the proposed approach by deriving a new significance test for quantitative discovery proteomics for which missing values have been a major issue for traditional methods such as the t-test. We evaluate the result on two label-free (phospho) proteomics datasets based on ion-intensity quantitation. Available at http://www.oncoproteomics.nl/software/stest.html : t.pham@vumc.nl. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Cost Efficiency in the University: A Departmental Evaluation Model

ERIC Educational Resources Information Center

Gimenez, Victor M.; Martinez, Jose Luis

2006-01-01

This article presents a model for the analysis of cost efficiency within the framework of data envelopment analysis models. It calculates the cost excess, separating a unit of production from its optimal or frontier levels, and, at the same time, breaks these excesses down into three explanatory factors: (a) technical inefficiency, which depends…

Technical indicators of economic performance in dairy sheep farming.

PubMed

Theodoridis, A; Ragkos, A; Roustemis, D; Arsenos, G; Abas, Z; Sinapis, E

2014-01-01

In this study, the level of technical efficiency of 58 sheep farms rearing the Chios breed in Greece was measured through the application of the stochastic frontier analysis method. A Translog stochastic frontier production function was estimated using farm accounting data of Chios sheep farms and the impact of various socio-demographic and biophysical factors on the estimated efficiency of the farms was evaluated. The farms were classified into efficiency groups on the basis of the estimated level of efficiency and a technical and economic descriptive analysis was applied in order to illustrate an indicative picture of their structure and productivity. The results of the stochastic frontier model indicate that there are substantial production inefficiencies among the Chios sheep farms and that these farms could increase their production through the improvement of technical efficiency, whereas the results of the inefficiency effects model reveal that the farm-specific explanatory factors can partly explain the observed efficiency differentials. The measurement of technical inefficiency and the detection of its determinants can be used to form the basis of policy recommendations that could contribute to the development of the sector.

Technical-economic modelling of integrated water management: wastewater reuse in a French island.

PubMed

Xu, P; Valette, F; Brissaud, F; Fazio, A; Lazarova, V

2001-01-01

An integrated technical-economic model is used to address water management issues in the French island of Noirmoutier. The model simulates potable water production and supply, potable and non potable water demand and consumption, wastewater collection, treatment and disposal, water storage, transportation and reuse. A variety of water management scenarios is assessed through technical, economic and environmental evaluation. The scenarios include wastewater reclamation and reuse for agricultural and landscape irrigation as well as domestic non potable application, desalination of seawater and brackish groundwater for potable water supply. The study shows that, in Noirmoutier, wastewater reclamation and reuse for crop irrigation is the most cost-effective solution to the lack of water resources and the protection of sensitive environment. Some water management projects which are regarded as having less economic benefit in the short-term may become competitive in the future, as a result of tightened environmental policy, changed public attitudes and advanced water treatment technologies. The model provides an appropriate tool for water resources planning and management.

Impact of Medicare Advantage penetration and hospital competition on technical efficiency of nursing care in US intensive care units.

PubMed

Min, Ari; Scott, Linda D; Park, Chang; Vincent, Catherine; Ryan, Catherine J; Lee, Taewha

2018-04-10

This study aimed to evaluate technical efficiency of US intensive care units and determine the effects of environmental factors on technical efficiency in providing quality of nursing care. Data were obtained from the 2014 National Database of Nursing Quality Indicators and the Centers for Medicare and Medicaid Services. Data envelopment analysis was used to estimate technical efficiency for each intensive care unit. Multilevel modeling was used to determine the effects of environmental factors on technical efficiency. Overall, Medicare Advantage penetration and hospital competition in a market did not create pressure for intensive care units to become more efficient by reducing their inputs. However, these 2 environmental factors showed positive influences on technical efficiency in intensive care units with certain levels of technical efficiency. The implications of the study results for management strategies and health policy may vary according to the levels of technical efficiency in intensive care units. Further studies are needed to examine why and how intensive care units with particular levels of technical efficiency are differently affected by certain environmental factors. Copyright © 2018 John Wiley & Sons, Ltd.

Project P.A.V.E. Evaluation. Technical Report 1977-78. Publication Number: 77.49.

ERIC Educational Resources Information Center

Eglsaer, Richard; Matuszek, Paula

Project PAVE was implemented in Travis High School, Austin, Texas, to extend and coordinate services for certain high school special education students. Four components were crucial to the Project PAVE model: parental involvement, academic achievement, vocational programing, and extracurricular opportunities. The project evaluation, conducted in…

Economic evaluation of a solar hot-water system--Palm Beach County, Florida

NASA Technical Reports Server (NTRS)

1981-01-01

Report projects solar-energy costs and savings for residential hot-water system over 20 year period. Evaluation uses technical and economic models with inputs based on working characteristics of installed system. Primary analysis permits calculation of economic viability for four other U.S. sites.

Nurses On-Line: Career Mobility for Registered Nurses.

ERIC Educational Resources Information Center

O'Brien, Barbara S.; Renner, Alice

2000-01-01

Describes how adult learning theory was used to restructure registered nurse courses for online instruction. Hardware/software needs, technical support, instructional model, teaching-learning considerations, and evaluation are discussed. (SK)

A Technical Analysis Information Fusion Approach for Stock Price Analysis and Modeling

NASA Astrophysics Data System (ADS)

Lahmiri, Salim

In this paper, we address the problem of technical analysis information fusion in improving stock market index-level prediction. We present an approach for analyzing stock market price behavior based on different categories of technical analysis metrics and a multiple predictive system. Each category of technical analysis measures is used to characterize stock market price movements. The presented predictive system is based on an ensemble of neural networks (NN) coupled with particle swarm intelligence for parameter optimization where each single neural network is trained with a specific category of technical analysis measures. The experimental evaluation on three international stock market indices and three individual stocks show that the presented ensemble-based technical indicators fusion system significantly improves forecasting accuracy in comparison with single NN. Also, it outperforms the classical neural network trained with index-level lagged values and NN trained with stationary wavelet transform details and approximation coefficients. As a result, technical information fusion in NN ensemble architecture helps improving prediction accuracy.

Post-processing techniques to enhance reliability of assignment algorithm based performance measures : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

Travel demand modeling plays a key role in the transportation system planning and evaluation process. The four-step sequential travel demand model is the most widely used technique in practice. Traffic assignment is the key step in the conventional f...

IAPCS: A COMPUTER MODEL THAT EVALUATES POLLUTION CONTROL SYSTEMS FOR UTILITY BOILERS

EPA Science Inventory

The IAPCS model, developed by U.S. EPA`s Air and Energy Engineering Research Laboratory and made available to the public through the National Technical Information Service, can be used by utility companies, architectural and engineering companies, and regulatory agencies at all l...

Logistics Enterprise Evaluation Model Based On Fuzzy Clustering Analysis

NASA Astrophysics Data System (ADS)

Fu, Pei-hua; Yin, Hong-bo

In this thesis, we introduced an evaluation model based on fuzzy cluster algorithm of logistics enterprises. First of all,we present the evaluation index system which contains basic information, management level, technical strength, transport capacity,informatization level, market competition and customer service. We decided the index weight according to the grades, and evaluated integrate ability of the logistics enterprises using fuzzy cluster analysis method. In this thesis, we introduced the system evaluation module and cluster analysis module in detail and described how we achieved these two modules. At last, we gave the result of the system.

Evaluating Model-Driven Development for large-scale EHRs through the openEHR approach.

PubMed

Christensen, Bente; Ellingsen, Gunnar

2016-05-01

In healthcare, the openEHR standard is a promising Model-Driven Development (MDD) approach for electronic healthcare records. This paper aims to identify key socio-technical challenges when the openEHR approach is put to use in Norwegian hospitals. More specifically, key fundamental assumptions are investigated empirically. These assumptions promise a clear separation of technical and domain concerns, users being in control of the modelling process, and widespread user commitment. Finally, these assumptions promise an easy way to model and map complex organizations. This longitudinal case study is based on an interpretive approach, whereby data were gathered through 440h of participant observation, 22 semi-structured interviews and extensive document studies over 4 years. The separation of clinical and technical concerns seemed to be aspirational, because both designing the technical system and modelling the domain required technical and clinical competence. Hence developers and clinicians found themselves working together in both arenas. User control and user commitment seemed not to apply in large-scale projects, as modelling the domain turned out to be too complicated and hence to appeal only to especially interested users worldwide, not the local end-users. Modelling proved to be a complex standardization process that shaped both the actual modelling and healthcare practice itself. A broad assemblage of contributors seems to be needed for developing an archetype-based system, in which roles, responsibilities and contributions cannot be clearly defined and delimited. The way MDD occurs has implications for medical practice per se in the form of the need to standardize practices to ensure that medical concepts are uniform across practices. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Urology technical and non-technical skills development: the emerging role of simulation.

PubMed

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including recertification. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

The Imperial Paediatric Emergency Training Toolkit (IPETT) for use in paediatric emergency training: development and evaluation of feasibility and validity.

PubMed

Lambden, Simon; DeMunter, Claudine; Dowson, Anne; Cooper, Mehrengise; Gautama, Sanjay; Sevdalis, Nick

2013-06-01

To develop and test the feasibility, reliability, and validity of a practical toolkit for the assessment and feedback of skills required to manage paediatric emergencies in critical care settings. The Imperial Paediatric Emergency Training Toolkit (IPETT) was developed based on current evidence-base and expert input. IPETT assesses both technical and non-technical skills. The technical component covers skills in the areas of clinical assessment, airway and breathing, cardiovascular, and drugs. The non-technical component is based on the validated NOTECHS tool and covers communication and interaction, cooperation and team skills, leadership and managerial skills, and decision-making. The reliability (internal consistency), content validity (inter-correlations between different skills) and concurrent validity (correlations between global technical and non-technical scores) of IPETT were prospectively evaluated in 45 simulated paediatric crises carried out in a PICU with anaesthetic and paediatric trainees (N=52). Non-parametric analyses were carried out. Significance was set at P<0.05. Cronbach alpha reliability coefficients were overall acceptable for the technical (alpha range=0.638-0.810) and good for the non-technical (alpha range=0.701-0.899) component of IPETT. The median inter-skill correlation was rho=0.564 and rho=0.549 for the technical and non-technical components, respectively. These indicate good content validity, as the skills were inter-related but not redundant. We also demonstrate a correlation between the global technical and non-technical scores (rho=0.471) - all Ps<0.05 during the assessments. IPETT offers a psychometrically viable and feasible to use tool in the context of paediatric emergencies training. This study shows that assessment of technical and non-technical skills in combination may offer a more clinically relevant model for training in paediatric emergencies. Further validation should aim to demonstrate skill retention over time and skill transfer from simulation-based training to real emergencies. Copyright © 2013. Published by Elsevier Ireland Ltd.

Evaluation of parameters of color profile models of LCD and LED screens

NASA Astrophysics Data System (ADS)

Zharinov, I. O.; Zharinov, O. O.

2017-12-01

The purpose of the research relates to the problem of parametric identification of the color profile model of LCD (liquid crystal display) and LED (light emitting diode) screens. The color profile model of a screen is based on the Grassmann’s Law of additive color mixture. Mathematically the problem is to evaluate unknown parameters (numerical coefficients) of the matrix transformation between different color spaces. Several methods of evaluation of these screen profile coefficients were developed. These methods are based either on processing of some colorimetric measurements or on processing of technical documentation data.

Status of the Ford program to evaluate ceramics for stator applications in automotive gas turbine engines

NASA Technical Reports Server (NTRS)

Trela, W.

1980-01-01

The paper reviews the progress of the major technical tasks of the DOE/NASA/Ford program Evaluation of Ceramics for Stator Applications in Automotive Gas Turbine Engines: reliability prediction, stator fabrication, material characterization, and stator evaluation. A fast fracture reliability model was prepared for a one-piece ceramic stator. Periodic inspection results are presented.

Strategy and gaps for modeling, simulation, and control of hybrid systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rabiti, Cristian; Garcia, Humberto E.; Hovsapian, Rob

2015-04-01

The purpose of this report is to establish a strategy for modeling and simulation of candidate hybrid energy systems. Modeling and simulation is necessary to design, evaluate, and optimize the system technical and economic performance. Accordingly, this report first establishes the simulation requirements to analysis candidate hybrid systems. Simulation fidelity levels are established based on the temporal scale, real and synthetic data availability or needs, solution accuracy, and output parameters needed to evaluate case-specific figures of merit. Accordingly, the associated computational and co-simulation resources needed are established; including physical models when needed, code assembly and integrated solutions platforms, mathematical solvers,more » and data processing. This report first attempts to describe the figures of merit, systems requirements, and constraints that are necessary and sufficient to characterize the grid and hybrid systems behavior and market interactions. Loss of Load Probability (LOLP) and effective cost of Effective Cost of Energy (ECE), as opposed to the standard Levelized Cost of Electricty (LCOE), are introduced as technical and economical indices for integrated energy system evaluations. Financial assessment methods are subsequently introduced for evaluation of non-traditional, hybrid energy systems. Algorithms for coupled and iterative evaluation of the technical and economic performance are subsequently discussed. This report further defines modeling objectives, computational tools, solution approaches, and real-time data collection and processing (in some cases using real test units) that will be required to model, co-simulate, and optimize; (a) an energy system components (e.g., power generation unit, chemical process, electricity management unit), (b) system domains (e.g., thermal, electrical or chemical energy generation, conversion, and transport), and (c) systems control modules. Co-simulation of complex, tightly coupled, dynamic energy systems requires multiple simulation tools, potentially developed in several programming languages and resolved on separate time scales. Whereas further investigation and development of hybrid concepts will provide a more complete understanding of the joint computational and physical modeling needs, this report highlights areas in which co-simulation capabilities are warranted. The current development status, quality assurance, availability and maintainability of simulation tools that are currently available for hybrid systems modeling is presented. Existing gaps in the modeling and simulation toolsets and development needs are subsequently discussed. This effort will feed into a broader Roadmap activity for designing, developing, and demonstrating hybrid energy systems.« less

48 CFR 315.305 - Proposal evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... following elements: (1) An explanation of the evaluation process and the role of evaluators throughout the... include, at a minimum, the following elements: (1) A list of recommended technical evaluation panel... that the technical evaluation will have in the award decision. (2) The technical evaluation process...

A Supervisory View of Unit Effectiveness. Technical Report.

ERIC Educational Resources Information Center

Weitzel, William; And Others

First-level supervisors from a cross section of business and industrial organizations provided evaluative and descriptive information about the immediate work group which each supervised. From this information, a model was built depicting first-level supervisory perceptions of behaviors which lead to work unit effectiveness. This model was…

Assessing Quality in Higher Education: New Criteria for Evaluating Students' Satisfaction

ERIC Educational Resources Information Center

Zineldin, Mosad; Akdag, Hatice Camgoz; Vasicheva, Valentina

2011-01-01

The aim of this research is to present a new quality assurance model (5Qs) and to examine the major factors affecting students' perception of cumulative satisfaction. The model includes behavioural dimensions of student satisfaction. The factors included in this cumulative summation are technical, functional, infrastructure, interaction and…

Training Parents to Teach; Four Models. First Chance for Children, Vol. 3.

ERIC Educational Resources Information Center

Grim, Janet, Ed.

Described in a monograph published by the Technical Assistance Delivery System (TADS) are the rationale, intake and screening procedures, service delivery, liaison and follow through, and evaluation of parent training models from four preschool demonstration centers for handicapped children. An overview discusses the purposes and dimensions of…

Three multimedia models used at hazardous and radioactive waste sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moskowitz, P.D.; Pardi, R.; Fthenakis, V.M.

1996-02-01

Multimedia models are used commonly in the initial phases of the remediation process where technical interest is focused on determining the relative importance of various exposure pathways. This report provides an approach for evaluating and critically reviewing the capabilities of multimedia models. This study focused on three specific models MEPAS Version 3.0, MMSOILS Version 2.2, and PRESTO-EPA-CPG Version 2.0. These models evaluate the transport and fate of contaminants from source to receptor through more than a single pathway. The presence of radioactive and mixed wastes at a site poses special problems. Hence, in this report, restrictions associated with the selectionmore » and application of multimedia models for sites contaminated with radioactive and mixed wastes are highlighted. This report begins with a brief introduction to the concept of multimedia modeling, followed by an overview of the three models. The remaining chapters present more technical discussions of the issues associated with each compartment and their direct application to the specific models. In these analyses, the following components are discussed: source term; air transport; ground water transport; overland flow, runoff, and surface water transport; food chain modeling; exposure assessment; dosimetry/risk assessment; uncertainty; default parameters. The report concludes with a description of evolving updates to the model; these descriptions were provided by the model developers.« less

The Diagnostic Efficacy of Cone-beam Computed Tomography in Endodontics: A Systematic Review and Analysis by a Hierarchical Model of Efficacy.

PubMed

Rosen, Eyal; Taschieri, Silvio; Del Fabbro, Massimo; Beitlitum, Ilan; Tsesis, Igor

2015-07-01

The aim of this study was to evaluate the diagnostic efficacy of cone-beam computed tomographic (CBCT) imaging in endodontics based on a systematic search and analysis of the literature using an efficacy model. A systematic search of the literature was performed to identify studies evaluating the use of CBCT imaging in endodontics. The identified studies were subjected to strict inclusion criteria followed by an analysis using a hierarchical model of efficacy (model) designed for appraisal of the literature on the levels of efficacy of a diagnostic imaging modality. Initially, 485 possible relevant articles were identified. After title and abstract screening and a full-text evaluation, 58 articles (12%) that met the inclusion criteria were analyzed and allocated to levels of efficacy. Most eligible articles (n = 52, 90%) evaluated technical characteristics or the accuracy of CBCT imaging, which was defined in this model as low levels of efficacy. Only 6 articles (10%) proclaimed to evaluate the efficacy of CBCT imaging to support the practitioner's decision making; treatment planning; and, ultimately, the treatment outcome, which was defined as higher levels of efficacy. The expected ultimate benefit of CBCT imaging to the endodontic patient as evaluated by its level of diagnostic efficacy is unclear and is mainly limited to its technical and diagnostic accuracy efficacies. Even for these low levels of efficacy, current knowledge is limited. Therefore, a cautious and rational approach is advised when considering CBCT imaging for endodontic purposes. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Thermal Integration of a Liquid Acquisition Device into a Cryogenic Feed System

NASA Technical Reports Server (NTRS)

Hastings, L. J.; Bolshinskiy, L. G.; Schunk, R. G.; Martin, A. K.; Eskridge, R. H.; Frenkel, A.; Grayson, G.; Pendleton, M. L.

2011-01-01

Primary objectives of this effort were to define the following: (1) Approaches for quantification of the accumulation of thermal energy within a capillary screen liquid acquisition device (LAD) for a lunar lander upper stage during periods of up to 210 days on the lunar surface, (2) techniques for mitigating heat entrapment, and (3) perform initial testing, data evaluation. The technical effort was divided into the following categories: (1) Detailed thermal modeling of the LAD/feed system interactions using both COMSOL computational fluid device and standard codes, (2) FLOW-3D modeling of bulk liquid to provide interfacing conditions for the LAD thermal modeling, (3) condensation conditioning of capillary screens to stabilize surface tension retention capability, and (4) subscale testing of an integrated LAD/feed system. Substantial progress was achieved in the following technical areas: (1) Thermal modeling and experimental approaches for evaluating integrated cryogen LAD/feed systems, at both the system and component levels, (2) reduced gravity pressure control analyses, (3) analytical modeling and testing for capillary screen conditioning using condensation and wicking, and (4) development of rapid turnaround testing techniques for evaluating LAD/feed system thermal and fluid integration. A comprehensive effort, participants included a diverse cross section of representatives from academia, contractors, and multiple Marshall Space Flight Center organizations.

Analysis and assessment of STES technologies

NASA Astrophysics Data System (ADS)

Brown, D. R.; Blahnik, D. E.; Huber, H. D.

1982-12-01

Technical and economic assessments completed in FY 1982 in support of the Seasonal Thermal Energy Storage (STES) segment of the Underground Energy Storage Program included: (1) a detailed economic investigation of the cost of heat storage in aquifers, (2) documentation for AQUASTOR, a computer model for analyzing aquifer thermal energy storage (ATES) coupled with district heating or cooling, and (3) a technical and economic evaluation of several ice storage concepts. This paper summarizes the research efforts and main results of each of these three activities. In addition, a detailed economic investigation of the cost of chill storage in aquifers is currently in progress. The work parallels that done for ATES heat storage with technical and economic assumptions being varied in a parametric analysis of the cost of ATES delivered chill. The computer model AQUASTOR is the principal analytical tool being employed.

Evaluating the relative impacts of operational and financial factors on the competitiveness of an algal biofuel production facility.

PubMed

Hise, Adam M; Characklis, Gregory W; Kern, Jordan; Gerlach, Robin; Viamajala, Sridhar; Gardner, Robert D; Vadlamani, Agasteswar

2016-11-01

Algal biofuels are becoming more economically competitive due to technological advances and government subsidies offering tax benefits and lower cost financing. These factors are linked, however, as the value of technical advances is affected by modeling assumptions regarding the growth conditions, process design, and financing of the production facility into which novel techniques are incorporated. Two such techniques, related to algal growth and dewatering, are evaluated in representative operating and financing scenarios using an integrated techno-economic model. Results suggest that these techniques can be valuable under specified conditions, but also that investment subsidies influence cost competitive facility design by incentivizing development of more capital intensive facilities (e.g., favoring hydrothermal liquefaction over transesterification-based facilities). Evaluating novel techniques under a variety of operational and financial scenarios highlights the set of site-specific conditions in which technical advances are most valuable, while also demonstrating the influence of subsidies linked to capital intensity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Critical Competitors. Evaluation of the Bay Area Writing Project. Technical Report.

ERIC Educational Resources Information Center

Thomas, Susan; Watson, Patti

Prepared as part of the evaluation of the Bay Area Writing Project (BAWP), this report compares BAWP to its "critical competitors" (other inservice teacher programs and programs for improving student writing). The BAWP model and ten other program descriptions are presented in identical descriptive formats. Three types of competitors are…

7 CFR Exhibit B to Subpart I of... - Evaluation Report of Self-Help Technical Assistance (TA) Grants

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 13 2014-01-01 2013-01-01 true Evaluation Report of Self-Help Technical Assistance... Self-Help Technical Assistance Grants Pt. 1944, Subpt. I, Exh. B Exhibit B to Subpart I of Part 1944—Evaluation Report of Self-Help Technical Assistance (TA) Grants Evaluation for Quarter Ending:(1...

7 CFR Exhibit B to Subpart I of... - Evaluation Report of Self-Help Technical Assistance (TA) Grants

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 13 2012-01-01 2012-01-01 false Evaluation Report of Self-Help Technical Assistance... Self-Help Technical Assistance Grants Pt. 1944, Subpt. I, Exh. B Exhibit B to Subpart I of Part 1944—Evaluation Report of Self-Help Technical Assistance (TA) Grants Evaluation for Quarter Ending:(1...

7 CFR Exhibit B to Subpart I of... - Evaluation Report of Self-Help Technical Assistance (TA) Grants

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 13 2013-01-01 2013-01-01 false Evaluation Report of Self-Help Technical Assistance... Self-Help Technical Assistance Grants Pt. 1944, Subpt. I, Exh. B Exhibit B to Subpart I of Part 1944—Evaluation Report of Self-Help Technical Assistance (TA) Grants Evaluation for Quarter Ending:(1...

Clean Energy Application Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freihaut, Jim

2013-09-30

The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the followingmore » efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive programs in New Jersey, Pennsylvania, Maryland and Delaware; (5) Developed and maintained a MACEAC website to provide technical information and regional CHP, WHR and DE case studies and site profiles for use by interested stakeholders in information transfer and policy discussions; (6) Provided Technical Assistance through feasibility studies and on site evaluations. The MACEAC completed 28 technical evaluations and 9 Level 1 CHP analyses ; and (7) the MACEAC provided Technical Education to the region through a series of 29 workshops and webinars, 37 technical presentations, 14 seminars and participation in 13 CHP conferences.« less

[The development and evaluation of software to verify diagnostic accuracy].

PubMed

Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

2012-02-01

This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

School Improvement in Petersburg: A Study of the Partnership for Achieving Successful Schools, Model IV Intervention Years One and Two?Evaluation Report

ERIC Educational Resources Information Center

Edwards, Joanna; Smith, Karen; Marr, Linda; Chadwick, Kristine

2004-01-01

The Model IV Intervention is one of four models that provide technical assistance to Virginia school divisions and that are now being tested by VDOE under the PA+SS project. The Model IV Intervention differs from Models I, II, and III because it is directed from the school division central office, includes a central office school improvement…

Ares I-X Flight Data Evaluation: Executive Overview

NASA Technical Reports Server (NTRS)

Huebner, Lawrence D.; Waits, David A.; Lewis, Donny L.; Richards, James S.; Coates, R. H., Jr.; Cruit, Wendy D.; Bolte, Elizabeth J.; Bangham, Michal E.; Askins, Bruce R.; Trausch, Ann N.

2011-01-01

NASA's Constellation Program (CxP) successfully launched the Ares I-X flight test vehicle on October 28, 2009. The Ares I-X flight was a developmental flight test to demonstrate that this very large, long, and slender vehicle could be controlled successfully. The flight offered a unique opportunity for early engineering data to influence the design and development of the Ares I crew launch vehicle. As the primary customer for flight data from the Ares I-X mission, the Ares Projects Office (APO) established a set of 33 flight evaluation tasks to correlate flight results with prospective design assumptions and models. The flight evaluation tasks used Ares I-X data to partially validate tools and methodologies in technical disciplines that will ultimately influence the design and development of Ares I and future launch vehicles. Included within these tasks were direct comparisons of flight data with preflight predictions and post-flight assessments utilizing models and processes being applied to design and develop Ares I. The benefits of early development flight testing were made evident by results from these flight evaluation tasks. This overview provides summary information from assessment of the Ares I-X flight test data and represents a small subset of the detailed technical results. The Ares Projects Office published a 1,600-plus-page detailed technical report that documents the full set of results. This detailed report is subject to the International Traffic in Arms Regulations (ITAR) and is available in the Ares Projects Office archives files.

Transfer and Use of Training Technology: A Model for Matching Training Approaches with Training Settings. Technical Report No. 74-24.

ERIC Educational Resources Information Center

Haverland, Edgar M.

The report describes a project designed to facilitate the transfer and utilization of training technology by developing a model for evaluating training approaches or innovtions in relation to the requirements, resources, and constraints of specific training settings. The model consists of two parallel sets of open-ended questions--one set…

Implementing and Evaluating a National Certification Technical Skills Examination: The Colorectal Objective Structured Assessment of Technical Skill.

PubMed

de Montbrun, Sandra; Roberts, Patricia L; Satterthwaite, Lisa; MacRae, Helen

2016-07-01

To implement the Colorectal Objective Structured Assessment of Technical skill (COSATS) into American Board of Colon and Rectal Surgery (ABCRS) certification and build evidence of validity for the interpretation of the scores of this high stakes assessment tool. Currently, technical skill assessment is not a formal component of board certification. With the technical demands of surgical specialties, documenting competence in technical skill at the time of certification with a valid tool is ideal. In September 2014, the COSATS was a mandatory component of ABCRS certification. Seventy candidates took the examination, with their performance evaluated by expert colorectal surgeons using a task-specific checklist, global rating scale, and overall performance scale. Passing scores were set and compared using 2 standard setting methodologies, using a compensatory and conjunctive model. Inter-rater reliability and the reliability of the pass/fail decision were calculated using Cronbach alpha and Subkoviak methodology, respectively. Overall COSATS scores and pass/fail status were compared with results on the ABCRS oral examination. The pass rate ranged from 85.7% to 90%. Inter-rater reliability (0.85) and reliability of the pass/fail decision (0.87 and 0.84) were high. A low positive correlation (r= 0.25) was seen between the COSATS and oral examination. All individuals who failed the COSATS passed the ABCRS oral examination. COSATS is the first technical skill examination used in national surgical board certification. This study suggests that the current certification process may be failing to identify individuals who have demonstrated technical deficiencies on this standardized assessment tool.

Knowledge discovery from data and Monte-Carlo DEA to evaluate technical efficiency of mental health care in small health areas

PubMed Central

García-Alonso, Carlos; Pérez-Naranjo, Leonor

2009-01-01

Introduction Knowledge management, based on information transfer between experts and analysts, is crucial for the validity and usability of data envelopment analysis (DEA). Aim To design and develop a methodology: i) to assess technical efficiency of small health areas (SHA) in an uncertainty environment, and ii) to transfer information between experts and operational models, in both directions, for improving expert’s knowledge. Method A procedure derived from knowledge discovery from data (KDD) is used to select, interpret and weigh DEA inputs and outputs. Based on KDD results, an expert-driven Monte-Carlo DEA model has been designed to assess the technical efficiency of SHA in Andalusia. Results In terms of probability, SHA 29 is the most efficient being, on the contrary, SHA 22 very inefficient. 73% of analysed SHA have a probability of being efficient (Pe) >0.9 and 18% <0.5. Conclusions Expert knowledge is necessary to design and validate any operational model. KDD techniques make the transfer of information from experts to any operational model easy and results obtained from the latter improve expert’s knowledge.

Cognitive Task Analysis, Interface Design, and Technical Troubleshooting.

ERIC Educational Resources Information Center

Steinberg, Linda S.; Gitomer, Drew H.

A model of the interface design process is proposed that makes use of two interdependent levels of cognitive analysis: the study of the criterion task through an analysis of expert/novice differences and the evaluation of the working user interface design through the application of a practical interface analysis methodology (GOMS model). This dual…

A Digital Computer Simulation of Cardiovascular and Renal Physiology.

ERIC Educational Resources Information Center

Tidball, Charles S.

1979-01-01

Presents the physiological MACPEE, one of a family of digital computer simulations used in Canada and Great Britain. A general description of the model is provided, along with a sample of computer output format, options for making interventions, advanced capabilities, an evaluation, and technical information for running a MAC model. (MA)

Crude Oil Spills and Health

MedlinePlus

... PubMed Health-Related Quality of Life in Older Coastal Residents After Multiple Disasters Modeling and evaluation of ... and TOXLINE references) Technical Product Bulletin - U.S. Environmental Protection Agency COREXIT® EC9527A (Formerly COREXIT 9527) ChemID - National ...

Visitor vehicle air and noise emissions study : Cape Cod National Seashore

DOT National Transportation Integrated Search

2005-09-01

The U.S. Department of Transportation, John A. Volpe National Transportation Systems Center (Volpe Center), Environmental Measurement and Modeling Division (Volpe Center), provided technical support to a : National Park Service (NPS) project to evalu...

Establishment of a rat and guinea pig aortic interposition graft model reveals model-specific patterns of intimal hyperplasia.

PubMed

Gregory, Elaine K; Vercammen, Janet M; Flynn, Megan E; Kibbe, Melina R

2016-12-01

Although the aortic interposition bypass model has been widely used to evaluate biomaterials for bypass grafting, there is no comprehensive description of the procedure or of the distribution of intimal hyperplasia that results. The objectives of this study were to (1) review and summarize approaches of aortic interposition grafting in animal models, (2) determine the pertinent anatomy for this procedure, (3) validate this model in the rat and guinea pig, and (4) compare the distribution of intimal hyperplasia that develops in each species. A literature search was performed in PubMed from 1980 to the present to analyze the use of anesthesia, anticoagulation, antiplatelet agents, graft material, suture, and anastomotic techniques. Using 10-week-old male Sprague-Dawley rats and Hartley guinea pigs, we established pertinent aortic anatomy, developed comparable models, and assessed complications for each model. At 30 days, the graft and associated aorta were explanted, intimal formation was assessed morphometrically, and cellularity was assessed via nuclear counting. We reviewed 30 articles and summarized the pertinent procedural findings. Upon establishing both animal models, key anatomic differences between the species that affect this model were noted. Guinea pigs have a much larger cecum, increased retroperitoneal fat, and lack the iliolumbar vessels compared with the rat. Surgical outcomes for the rat model included a 53% technical success rate and a 32% technical error rate. Surgical outcomes for the guinea pig model included a 69% technical success rate and a 31% technical error rate. These two species demonstrated unique distribution of intimal hyperplasia at 30 days. Intimal hyperplasia in the rat model was greatest at two areas, the proximal graft (5400 μm 2 ; P < .001) and distal graft (2800 μm 2 ; P < .04), whereas the guinea pig model developed similar intimal hyperplasia throughout the graft (4500-5100 μm 2 ; P < .01). In this report, we summarize the literature on the aortic interposition graft model, present a detailed description of the anatomy and aortic interposition graft procedure in the rat and guinea pig, and describe a unique distribution of intimal formation that results in both species. This information will be helpful when designing studies to evaluate novel graft materials in the future. Published by Elsevier Inc.

48 CFR 715.303-70 - Responsibilities of USAID evaluation committees.

Code of Federal Regulations, 2010 CFR

2010-10-01

... evaluation committees. A technical evaluation committee shall be established for each proposed procurement. In each case, the committee shall be composed of a chair representing the cognizant technical office... representatives from other concerned offices as appropriate. (b) Technical evaluation procedures. (1) The...

Development of a model performance-based sign sheeting specification based on the evaluation of nighttime traffic signs using legibility and eye-tracker data : data and analyses.

DOT National Transportation Integrated Search

2010-09-01

This report presents data and technical analyses for Texas Department of Transportation Project 0-5235. This : project focused on the evaluation of traffic sign sheeting performance in terms of meeting the nighttime : driver needs. The goal was to de...

Georgia's Pre-K Professional Development Evaluation: Technical Appendix. Publication #2015-02B

ERIC Educational Resources Information Center

Early, Diane M.; Pan, Yi; Maxwell, Kelly L.

2014-01-01

The primary purpose of the accompanying final study was to evaluate the impact of two professional development models on teacher-child interactions in Georgia's Pre-K classrooms. Teachers were randomly selected to participate and were randomly assigned to one of the professional development conditions or to a control group. Because of this…

Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

ERIC Educational Resources Information Center

Björkholm, Eva

2014-01-01

Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

Introducing a Fresh Cadaver Model for Ultrasound-guided Central Venous Access Training in Undergraduate Medical Education

PubMed Central

Miller, Ryan; Ho, Hang; Ng, Vivienne; Tran, Melissa; Rappaport, Douglas; Rappaport, William J.A.; Dandorf, Stewart J.; Dunleavy, James; Viscusi, Rebecca; Amini, Richard

2016-01-01

Introduction Over the past decade, medical students have witnessed a decline in the opportunities to perform technical skills during their clinical years. Ultrasound-guided central venous access (USG-CVA) is a critical procedure commonly performed by emergency medicine, anesthesia, and general surgery residents, often during their first month of residency. However, the acquisition of skills required to safely perform this procedure is often deficient upon graduation from medical school. To ameliorate this lack of technical proficiency, ultrasound simulation models have been introduced into undergraduate medical education to train venous access skills. Criticisms of simulation models are the innate lack of realistic tactile qualities, as well as the lack of anatomical variances when compared to living patients. The purpose of our investigation was to design and evaluate a life-like and reproducible training model for USG-CVA using a fresh cadaver. Methods This was a cross-sectional study at an urban academic medical center. An 18-point procedural knowledge tool and an 18-point procedural skill evaluation tool were administered during a cadaver lab at the beginning and end of the surgical clerkship. During the fresh cadaver lab, procedure naïve third-year medical students were trained on how to perform ultrasound-guided central venous access of the femoral and internal jugular vessels. Preparation of the fresh cadaver model involved placement of a thin-walled latex tubing in the anatomic location of the femoral and internal jugular vein respectively. Results Fifty-six third-year medical students participated in this study during their surgical clerkship. The fresh cadaver model provided high quality and lifelike ultrasound images despite numerous cannulation attempts. Technical skill scores improved from an average score of 3 to 12 (p<0.001) and procedural knowledge scores improved from an average score of 4 to 8 (p<0.001). Conclusion The use of this novel cadaver model prevented extravasation of fluid, maintained ultrasound-imaging quality, and proved to be an effective educational model allowing third-year medical students to improve and maintain their technical skills. PMID:27330672

Introducing a Fresh Cadaver Model for Ultrasound-guided Central Venous Access Training in Undergraduate Medical Education.

PubMed

Miller, Ryan; Ho, Hang; Ng, Vivienne; Tran, Melissa; Rappaport, Douglas; Rappaport, William J A; Dandorf, Stewart J; Dunleavy, James; Viscusi, Rebecca; Amini, Richard

2016-05-01

Over the past decade, medical students have witnessed a decline in the opportunities to perform technical skills during their clinical years. Ultrasound-guided central venous access (USG-CVA) is a critical procedure commonly performed by emergency medicine, anesthesia, and general surgery residents, often during their first month of residency. However, the acquisition of skills required to safely perform this procedure is often deficient upon graduation from medical school. To ameliorate this lack of technical proficiency, ultrasound simulation models have been introduced into undergraduate medical education to train venous access skills. Criticisms of simulation models are the innate lack of realistic tactile qualities, as well as the lack of anatomical variances when compared to living patients. The purpose of our investigation was to design and evaluate a life-like and reproducible training model for USG-CVA using a fresh cadaver. This was a cross-sectional study at an urban academic medical center. An 18-point procedural knowledge tool and an 18-point procedural skill evaluation tool were administered during a cadaver lab at the beginning and end of the surgical clerkship. During the fresh cadaver lab, procedure naïve third-year medical students were trained on how to perform ultrasound-guided central venous access of the femoral and internal jugular vessels. Preparation of the fresh cadaver model involved placement of a thin-walled latex tubing in the anatomic location of the femoral and internal jugular vein respectively. Fifty-six third-year medical students participated in this study during their surgical clerkship. The fresh cadaver model provided high quality and lifelike ultrasound images despite numerous cannulation attempts. Technical skill scores improved from an average score of 3 to 12 (p<0.001) and procedural knowledge scores improved from an average score of 4 to 8 (p<0.001). The use of this novel cadaver model prevented extravasation of fluid, maintained ultrasound-imaging quality, and proved to be an effective educational model allowing third-year medical students to improve and maintain their technical skills.

Comparing multi-criteria decision analysis and integrated assessment to support long-term water supply planning

PubMed Central

Maurer, Max; Lienert, Judit

2017-01-01

We compare the use of multi-criteria decision analysis (MCDA)–or more precisely, models used in multi-attribute value theory (MAVT)–to integrated assessment (IA) models for supporting long-term water supply planning in a small town case study in Switzerland. They are used to evaluate thirteen system scale water supply alternatives in four future scenarios regarding forty-four objectives, covering technical, social, environmental, and economic aspects. The alternatives encompass both conventional and unconventional solutions and differ regarding technical, spatial and organizational characteristics. This paper focuses on the impact assessment and final evaluation step of the structured MCDA decision support process. We analyze the performance of the alternatives for ten stakeholders. We demonstrate the implications of model assumptions by comparing two IA and three MAVT evaluation model layouts of different complexity. For this comparison, we focus on the validity (ranking stability), desirability (value), and distinguishability (value range) of the alternatives given the five model layouts. These layouts exclude or include stakeholder preferences and uncertainties. Even though all five led us to identify the same best alternatives, they did not produce identical rankings. We found that the MAVT-type models provide higher distinguishability and a more robust basis for discussion than the IA-type models. The needed complexity of the model, however, should be determined based on the intended use of the model within the decision support process. The best-performing alternatives had consistently strong performance for all stakeholders and future scenarios, whereas the current water supply system was outperformed in all evaluation layouts. The best-performing alternatives comprise proactive pipe rehabilitation, adapted firefighting provisions, and decentralized water storage and/or treatment. We present recommendations for possible ways of improving water supply planning in the case study and beyond. PMID:28481881

Parametrization and evaluation of marine environmental impacts produced by deep-sea manganese nodule mining

NASA Astrophysics Data System (ADS)

Oebius, Horst U.; Becker, Hermann J.; Rolinski, Susanne; Jankowski, Jacek A.

The evaluation of marine environmental impacts resulting from the exploitation of marine resources requires the numerical description, parametrization, and modelling of such processes in order to be able to transfer, compare, and forecast the effects of anthropogenic activities in the deep sea. One of the controversial effects is the formation and behaviour of sediment clouds as a consequence of anthropogenic activities on the seafloor. Since there is a need for reliable data, two subprojects of the "Interdisciplinary Deep-sea Environmental Protection Group (TUSCH)"-project "Impacts from Technical Activities on the Deep-Sea Ecosystem of the South East Pacific Offshore Peru (ATESEPP)" were devoted to the assembly of such data. Based on the German technical approach for deep-sea mining, the possible environmental impacts by a miner were estimated, the impacts on the seafloor were simulated and investigated by tests with large volume undisturbed sediment samples on board the research vessel and in the laboratory, and the results were evaluated and extrapolated. This report gives a comprehensive presentation of the physical problems, the technical approach, and the results of these investigations.

Texas lignite and the visual resource: an objective approach to visual resource evaluation and management

Treesearch

Harlow C. Landphair

1979-01-01

This paper relates the evolution of an empirical model used to predict public response to scenic quality objectively. The text relates the methods used to develop the visual quality index model, explains the terms used in the equation and briefly illustrates how the model is applied and how it is tested. While the technical application of the model relies heavily on...

48 CFR 2415.305 - Proposal evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical portion of each proposal to the TEP Chairperson or his or her designee. The cost/price portion of each proposal shall be retained by the Contracting Officer pending initial technical evaluation by the TEP. (3) Technical evaluation. The TEP shall rate each proposal based on the evaluation factors...

The NIST Simple Guide for Evaluating and Expressing Measurement Uncertainty

NASA Astrophysics Data System (ADS)

Possolo, Antonio

2016-11-01

NIST has recently published guidance on the evaluation and expression of the uncertainty of NIST measurement results [1, 2], supplementing but not replacing B. N. Taylor and C. E. Kuyatt's (1994) Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results (NIST Technical Note 1297) [3], which tracks closely the Guide to the expression of uncertainty in measurement (GUM) [4], originally published in 1995 by the Joint Committee for Guides in Metrology of the International Bureau of Weights and Measures (BIPM). The scope of this Simple Guide, however, is much broader than the scope of both NIST Technical Note 1297 and the GUM, because it attempts to address several of the uncertainty evaluation challenges that have arisen at NIST since the 1990s, for example to include molecular biology, greenhouse gases and climate science measurements, and forensic science. The Simple Guide also expands the scope of those two other guidance documents by recognizing observation equations (that is, statistical models) as bona fide measurement models. These models are indispensable to reduce data from interlaboratory studies, to combine measurement results for the same measurand obtained by different methods, and to characterize the uncertainty of calibration and analysis functions used in the measurement of force, temperature, or composition of gas mixtures. This presentation reviews the salient aspects of the Simple Guide, illustrates the use of models and methods for uncertainty evaluation not contemplated in the GUM, and also demonstrates the NIST Uncertainty Machine [5] and the NIST Consensus Builder, which are web-based applications accessible worldwide that facilitate evaluations of measurement uncertainty and the characterization of consensus values in interlaboratory studies.

The NBS Energy Model Assessment project: Summary and overview

NASA Astrophysics Data System (ADS)

Gass, S. I.; Hoffman, K. L.; Jackson, R. H. F.; Joel, L. S.; Saunders, P. B.

1980-09-01

The activities and technical reports for the project are summarized. The reports cover: assessment of the documentation of Midterm Oil and Gas Supply Modeling System; analysis of the model methodology characteristics of the input and other supporting data; statistical procedures undergirding construction of the model and sensitivity of the outputs to variations in input, as well as guidelines and recommendations for the role of these in model building and developing procedures for their evaluation.

A Data Analysis Approach to Evaluating Achievement Outcomes of Instruction. Technical Report No. 338. Report from the Project on Conditions of School Learning and Instructional Strategies.

ERIC Educational Resources Information Center

Quilling, Mary Rintoul

The purpose of the present study is to demonstrate the utility of data analysis methodology in evaluative research relating pupil and curriculum variables to pupil achievement. Regression models which account for achievement will result from the application of the methodology to two evaluative problems--one of curriculum comparison and another…

Introduction to special section on The U.S. IOOS Coastal and Ocean Modeling Testbed

NASA Astrophysics Data System (ADS)

Luettich, Richard A.; Wright, L. Donelson; Signell, Richard; Friedrichs, Carl; Friedrichs, Marjy; Harding, John; Fennel, Katja; Howlett, Eoin; Graves, Sara; Smith, Elizabeth; Crane, Gary; Baltes, Rebecca

2013-12-01

Strong and strategic collaborations among experts from academia, federal operational centers, and industry have been forged to create a U.S. IOOS Coastal and Ocean Modeling Testbed (COMT). The COMT mission is to accelerate the transition of scientific and technical advances from the coastal and ocean modeling research community to improved operational ocean products and services. This is achieved via the evaluation of existing technology or the development of new technology depending on the status of technology within the research community. The initial phase of the COMT has addressed three coastal and ocean prediction challenges of great societal importance: estuarine hypoxia, shelf hypoxia, and coastal inundation. A fourth effort concentrated on providing and refining the cyberinfrastructure and cyber tools to support the modeling work and to advance interoperability and community access to the COMT archive. This paper presents an overview of the initiation of the COMT, the findings of each team and a discussion of the role of the COMT in research to operations and its interface with the coastal and ocean modeling community in general. Detailed technical results are presented in the accompanying series of 16 technical papers in this special issue.

Removing Batch Effects from Longitudinal Gene Expression - Quantile Normalization Plus ComBat as Best Approach for Microarray Transcriptome Data

PubMed Central

Müller, Christian; Schillert, Arne; Röthemeier, Caroline; Trégouët, David-Alexandre; Proust, Carole; Binder, Harald; Pfeiffer, Norbert; Beutel, Manfred; Lackner, Karl J.; Schnabel, Renate B.; Tiret, Laurence; Wild, Philipp S.; Blankenberg, Stefan

2016-01-01

Technical variation plays an important role in microarray-based gene expression studies, and batch effects explain a large proportion of this noise. It is therefore mandatory to eliminate technical variation while maintaining biological variability. Several strategies have been proposed for the removal of batch effects, although they have not been evaluated in large-scale longitudinal gene expression data. In this study, we aimed at identifying a suitable method for batch effect removal in a large study of microarray-based longitudinal gene expression. Monocytic gene expression was measured in 1092 participants of the Gutenberg Health Study at baseline and 5-year follow up. Replicates of selected samples were measured at both time points to identify technical variability. Deming regression, Passing-Bablok regression, linear mixed models, non-linear models as well as ReplicateRUV and ComBat were applied to eliminate batch effects between replicates. In a second step, quantile normalization prior to batch effect correction was performed for each method. Technical variation between batches was evaluated by principal component analysis. Associations between body mass index and transcriptomes were calculated before and after batch removal. Results from association analyses were compared to evaluate maintenance of biological variability. Quantile normalization, separately performed in each batch, combined with ComBat successfully reduced batch effects and maintained biological variability. ReplicateRUV performed perfectly in the replicate data subset of the study, but failed when applied to all samples. All other methods did not substantially reduce batch effects in the replicate data subset. Quantile normalization plus ComBat appears to be a valuable approach for batch correction in longitudinal gene expression data. PMID:27272489

Risk assessment analysis of the future technical unit dedicated to the evaluation and treatment of motor disabilities.

PubMed

Grelier, S; Thetio, M; Quentin, V; Achache, V; Sanchez, N; Leroux, V; Durand, E; Pequignot, R

2011-03-01

The National Hospital of Saint Maurice (HNSM) for Physical Medicine and Rehabilitation aims at strengthening its position as a pivot rehabilitation and physical therapy center. The opening in 2011 of a new unit for the evaluation and treatment of motor disabilities meets this objective. This project includes several parts: clinical, financial, architectural, organizational, applied clinical research as well as dealing with medical equipments and information system. This study focuses on the risk assessment of this future technical unit. This study was conducted by a group of professionals working for the hospital. It started with the design of a functional model to better comprehend the system to be analyzed. Risk assessment consists in confronting this functional model to a list of dangers in order to determine the vulnerable areas of the system. Then the team designed some scenarios to identify the causes, securities barriers and consequences in order to rank the risks. The analysis targeted various dangers, e.g. political, strategic, financial, economical, marketing, clinical and operational. The team identified more than 70 risky scenarios. For 75% of them the criticality level was deemed initially tolerable and under control or unacceptable. The implementation of an action plan for reducing the level of risks before opening this technical unit brought the system down to an acceptable level at 66%. A year prior to opening this technical unit for the evaluation and treatment of motor disabilities, conducting this preliminary risk assessment, with its exhaustive and rigorous methodology, enabled the concerned professionals to work together around an action plan for reducing the risks. 2011 Elsevier Masson SAS. All rights reserved.

75 FR 9608 - National Protection and Programs Directorate; Technical Assistance Request and Evaluation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-03

... Directorate; Technical Assistance Request and Evaluation AGENCY: National Protection and Programs Directorate... assistance requests from each State and territory. OEC will use the Technical Assistance Evaluation Form to... electronically. Evaluation forms may be submitted electronically or in paper form. The Office of Management and...

The Effect of Technical Assistance on Involvement and Use: The Case of a Research, Evaluation, and Technical Assistance Project

ERIC Educational Resources Information Center

Roseland, Denise; Volkov, Boris B.; Callow-Heusser, Catherine

2011-01-01

In contrast to typical National Science Foundation program evaluations, the Utah State Math Science Partnership-Research, Evaluation and Technical Assistance Project (MSP-RETA) provided technical assistance (TA) in two forms: direct TA for up to 10 projects a year, and professional development sessions for a larger number of project staff. Not…

[Text Comprehensibility of Hospital Report Cards].

PubMed

Sander, U; Kolb, B; Christoph, C; Emmert, M

2016-12-01

Objectives: Recently, the number of hospital report cards that compare quality of hospitals and present information from German quality reports has greatly increased. Objectives of this study were to a) identify suitable methods for measuring the readability and comprehensibility of hospital report cards, b) to obtain reliable information on the comprehensibility of texts for laymen, c) to give recommendations for improvements and d) to recommend public health actions. Methods: The readability and comprehensibility of the texts were tested with a) a computer-aided evaluation of formal text characteristics (readability indices Flesch (German formula) and 1. Wiener Sachtextformel formula), b) an expert-based heuristic analysis of readability and comprehensibility of texts (counting technical terms and analysis of text simplicity as well as brevity and conciseness using the Hamburg intelligibility model) and c) a survey of subjects about the comprehensibility of individual technical terms, the assessment of the comprehensibility of the presentations and the subjects' decisions in favour of one of the 5 presented clinics due to the better quality of data. In addition, the correlation between the results of the text analysis with the results from the survey of subjects was tested. Results: The assessment of texts with the computer-aided evaluations showed poor comprehensibility values. The assessment of text simplicity using the Hamburg intelligibility model showed poor comprehensibility values (-0.3). On average, 6.8% of the words used were technical terms. A review of 10 technical terms revealed that in all cases only a minority of respondents (from 4.4% to 39.1%) exactly knew what was meant by each of them. Most subjects (62.4%) also believed that unclear terms worsened their understanding of the information offered. The correlation analysis showed that presentations with a lower frequency of technical terms and better values for the text simplicity were better understood. Conclusion: The determination of the frequency of technical terms and the assessment of text simplicity using the Hamburg intelligibility model were suitable methods to determine the readability and comprehensibility of presentations of quality indicators. The analysis showed predominantly poor comprehensibility values and indicated the need to improve the texts of report cards. © Georg Thieme Verlag KG Stuttgart · New York.

Crew Transportation Technical Standards and Design Evaluation Criteria

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

Increasing the technical level of mining haul trucks

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

2017-11-01

Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

Cost drivers and resource allocation in military health care systems.

PubMed

Fulton, Larry; Lasdon, Leon S; McDaniel, Reuben R

2007-03-01

This study illustrates the feasibility of incorporating technical efficiency considerations in the funding of military hospitals and identifies the primary drivers for hospital costs. Secondary data collected for 24 U.S.-based Army hospitals and medical centers for the years 2001 to 2003 are the basis for this analysis. Technical efficiency was measured by using data envelopment analysis; subsequently, efficiency estimates were included in logarithmic-linear cost models that specified cost as a function of volume, complexity, efficiency, time, and facility type. These logarithmic-linear models were compared against stochastic frontier analysis models. A parsimonious, three-variable, logarithmic-linear model composed of volume, complexity, and efficiency variables exhibited a strong linear relationship with observed costs (R(2) = 0.98). This model also proved reliable in forecasting (R(2) = 0.96). Based on our analysis, as much as $120 million might be reallocated to improve the United States-based Army hospital performance evaluated in this study.

Testing the accuracy of growth and yield models for southern hardwood forests

Treesearch

H. Michael Rauscher; Michael J. Young; Charles D. Webb; Daniel J. Robison

2000-01-01

The accuracy of ten growth and yield models for Southern Appalachian upland hardwood forests and southern bottomland forests was evaluated. In technical applications, accuracy is the composite of both bias (average error) and precision. Results indicate that GHAT, NATPIS, and a locally calibrated version of NETWIGS may be regarded as being operationally valid...

FIELD PERFORMANCE OF ADVANCED TECHNOLOGY WOODSTOVES IN GLEN FALLS, NY, 1988-89 - VOLUME II - TECHNICAL APPENDICES

EPA Science Inventory

The report gives results of an evaluation of particulate emission trends for three models of catalytic and two models of non- catalytic woodstoves under "in-home" burning conditions during the 1988-89 heating season in Glens Falls, NY. The results (averaging 9.4 g/h and 9.4 g/kg...

Scientific and technical advisory committee review of the nutrient inputs to the watershed model

USDA-ARS?s Scientific Manuscript database

The following is a report by a STAC Review Team concerning the methods and documentation used by the Chesapeake Bay Partnership for evaluation of nutrient inputs to Phase 6 of the Chesapeake Bay Watershed Model. The “STAC Review of the Nutrient Inputs to the Watershed Model” (previously referred to...

Evaluation and Information in the Field of Technical Aids for Disabled Persons: An European Perspective. Monograph Number Thirty-Five.

ERIC Educational Resources Information Center

Pedotti, Antonio, Ed.; Andrich, Renzo, Ed.

The monograph provides information on evaluation of technical aids, wheelchairs, and computerized information systems for disabled persons. The first chapter provides a general overview of actions of the European Community concerning technical aids evaluation, information on the "Concerted Action" program called "Evaluation of…

Technical Reliability Studies. EOS/ESD Technology Abstracts

DTIC Science & Technology

1982-01-01

RESISTANT BIPOLAR TRANSISTOR DESIGN AND ITS APPLICATIONS TO LINEAR INTEGRATED CIRCUITS 16145 MODULE ELECTROSTATIC DISCHARGE SIMULATOR 15786 SOME...T.M. 16476 STATIC DISCHARGE MODELING TECHNIQUES FOR EVALUATION OF INTEGRATED (FET) CIRCUIT DESTRUCTION 16145 MODULE ELECTAOSTATIC DISCHARGE SIMULATOR...PLASTIC LSI CIRCUITS PRklE, L.A., II 16145 MODULE ELECTROSTATIC DISCHARGE SIMULATOR PRICE, R.D. 13455 EVALUATION OF PLASTIC LSI CIRCUITS PSHAENICH, A

Hanford internal dosimetry program manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.

1989-10-01

This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs.

Drift-Scale Coupled Processes (DST and THC Seepage) Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. Dixon

The purpose of this Model Report (REV02) is to document the unsaturated zone (UZ) models used to evaluate the potential effects of coupled thermal-hydrological-chemical (THC) processes on UZ flow and transport. This Model Report has been developed in accordance with the ''Technical Work Plan for: Performance Assessment Unsaturated Zone'' (Bechtel SAIC Company, LLC (BSC) 2002 [160819]). The technical work plan (TWP) describes planning information pertaining to the technical scope, content, and management of this Model Report in Section 1.12, Work Package AUZM08, ''Coupled Effects on Flow and Seepage''. The plan for validation of the models documented in this Model Reportmore » is given in Attachment I, Model Validation Plans, Section I-3-4, of the TWP. Except for variations in acceptance criteria (Section 4.2), there were no deviations from this TWP. This report was developed in accordance with AP-SIII.10Q, ''Models''. This Model Report documents the THC Seepage Model and the Drift Scale Test (DST) THC Model. The THC Seepage Model is a drift-scale process model for predicting the composition of gas and water that could enter waste emplacement drifts and the effects of mineral alteration on flow in rocks surrounding drifts. The DST THC model is a drift-scale process model relying on the same conceptual model and much of the same input data (i.e., physical, hydrological, thermodynamic, and kinetic) as the THC Seepage Model. The DST THC Model is the primary method for validating the THC Seepage Model. The DST THC Model compares predicted water and gas compositions, as well as mineral alteration patterns, with observed data from the DST. These models provide the framework to evaluate THC coupled processes at the drift scale, predict flow and transport behavior for specified thermal-loading conditions, and predict the evolution of mineral alteration and fluid chemistry around potential waste emplacement drifts. The DST THC Model is used solely for the validation of the THC Seepage Model and is not used for calibration to measured data.« less

Bridging Scales: A Model-Based Assessment of the Technical Tidal-Stream Energy Resource off Massachusetts, USA

NASA Astrophysics Data System (ADS)

Cowles, G. W.; Hakim, A.; Churchill, J. H.

2016-02-01

Tidal in-stream energy conversion (TISEC) facilities provide a highly predictable and dependable source of energy. Given the economic and social incentives to migrate towards renewable energy sources there has been tremendous interest in the technology. Key challenges to the design process stem from the wide range of problem scales extending from device to array. In the present approach we apply a multi-model approach to bridge the scales of interest and select optimal device geometries to estimate the technical resource for several realistic sites in the coastal waters of Massachusetts, USA. The approach links two computational models. To establish flow conditions at site scales ( 10m), a barotropic setup of the unstructured grid ocean model FVCOM is employed. The model is validated using shipboard and fixed ADCP as well as pressure data. For device scale, the structured multiblock flow solver SUmb is selected. A large ensemble of simulations of 2D cross-flow tidal turbines is used to construct a surrogate design model. The surrogate model is then queried using velocity profiles extracted from the tidal model to determine the optimal geometry for the conditions at each site. After device selection, the annual technical yield of the array is evaluated with FVCOM using a linear momentum actuator disk approach to model the turbines. Results for several key Massachusetts sites including comparison with theoretical approaches will be presented.

Technical note: Evaluation of the simultaneous measurements of mesospheric OH, HO2, and O3 under a photochemical equilibrium assumption - a statistical approach

NASA Astrophysics Data System (ADS)

Kulikov, Mikhail Y.; Nechaev, Anton A.; Belikovich, Mikhail V.; Ermakova, Tatiana S.; Feigin, Alexander M.

2018-05-01

This Technical Note presents a statistical approach to evaluating simultaneous measurements of several atmospheric components under the assumption of photochemical equilibrium. We consider simultaneous measurements of OH, HO2, and O3 at the altitudes of the mesosphere as a specific example and their daytime photochemical equilibrium as an evaluating relationship. A simplified algebraic equation relating local concentrations of these components in the 50-100 km altitude range has been derived. The parameters of the equation are temperature, neutral density, local zenith angle, and the rates of eight reactions. We have performed a one-year simulation of the mesosphere and lower thermosphere using a 3-D chemical-transport model. The simulation shows that the discrepancy between the calculated evolution of the components and the equilibrium value given by the equation does not exceed 3-4 % in the full range of altitudes independent of season or latitude. We have developed a statistical Bayesian evaluation technique for simultaneous measurements of OH, HO2, and O3 based on the equilibrium equation taking into account the measurement error. The first results of the application of the technique to MLS/Aura data (Microwave Limb Sounder) are presented in this Technical Note. It has been found that the satellite data of the HO2 distribution regularly demonstrate lower altitudes of this component's mesospheric maximum. This has also been confirmed by model HO2 distributions and comparison with offline retrieval of HO2 from the daily zonal means MLS radiance.

Engineered Barrier System: Physical and Chemical Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. Dixon

2004-04-26

The conceptual and predictive models documented in this Engineered Barrier System: Physical and Chemical Environment Model report describe the evolution of the physical and chemical conditions within the waste emplacement drifts of the repository. The modeling approaches and model output data will be used in the total system performance assessment (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. These models evaluate the range of potential water compositions within the emplacement drifts, resulting from the interaction of introduced materials and minerals in dust with water seeping into the drifts and with aqueous solutions forming bymore » deliquescence of dust (as influenced by atmospheric conditions), and from thermal-hydrological-chemical (THC) processes in the drift. These models also consider the uncertainty and variability in water chemistry inside the drift and the compositions of introduced materials within the drift. This report develops and documents a set of process- and abstraction-level models that constitute the engineered barrier system: physical and chemical environment model. Where possible, these models use information directly from other process model reports as input, which promotes integration among process models used for total system performance assessment. Specific tasks and activities of modeling the physical and chemical environment are included in the technical work plan ''Technical Work Plan for: In-Drift Geochemistry Modeling'' (BSC 2004 [DIRS 166519]). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system analysis model reports.« less

TurboTech Technical Evaluation Automated System

NASA Technical Reports Server (NTRS)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Model Validation Status Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

E.L. Hardin

The primary objective for the Model Validation Status Review was to perform a one-time evaluation of model validation associated with the analysis/model reports (AMRs) containing model input to total-system performance assessment (TSPA) for the Yucca Mountain site recommendation (SR). This review was performed in response to Corrective Action Request BSC-01-C-01 (Clark 2001, Krisha 2001) pursuant to Quality Assurance review findings of an adverse trend in model validation deficiency. The review findings in this report provide the following information which defines the extent of model validation deficiency and the corrective action needed: (1) AMRs that contain or support models are identified,more » and conversely, for each model the supporting documentation is identified. (2) The use for each model is determined based on whether the output is used directly for TSPA-SR, or for screening (exclusion) of features, events, and processes (FEPs), and the nature of the model output. (3) Two approaches are used to evaluate the extent to which the validation for each model is compliant with AP-3.10Q (Analyses and Models). The approaches differ in regard to whether model validation is achieved within individual AMRs as originally intended, or whether model validation could be readily achieved by incorporating information from other sources. (4) Recommendations are presented for changes to the AMRs, and additional model development activities or data collection, that will remedy model validation review findings, in support of licensing activities. The Model Validation Status Review emphasized those AMRs that support TSPA-SR (CRWMS M&O 2000bl and 2000bm). A series of workshops and teleconferences was held to discuss and integrate the review findings. The review encompassed 125 AMRs (Table 1) plus certain other supporting documents and data needed to assess model validity. The AMRs were grouped in 21 model areas representing the modeling of processes affecting the natural and engineered barriers, plus the TSPA model itself Description of the model areas is provided in Section 3, and the documents reviewed are described in Section 4. The responsible manager for the Model Validation Status Review was the Chief Science Officer (CSO) for Bechtel-SAIC Co. (BSC). The team lead was assigned by the CSO. A total of 32 technical specialists were engaged to evaluate model validation status in the 21 model areas. The technical specialists were generally independent of the work reviewed, meeting technical qualifications as discussed in Section 5.« less

Curriculum Programs in Action, Their Administration and Evaluation; Report of a Conference Devoted to Description, Demonstration, and Evaluative Discussions of Innovative Programs in Vocational-Technical Education.

ERIC Educational Resources Information Center

San Francisco State Coll., CA. Center for Technological Education.

The presentation, review and evaluation of innovative vocational-technical curriculums in operation was the major function of a San Francisco conference sponsored jointly by the Center for Technical Education at San Francisco State College and the Center for Studies in Vocational and Technical Education at the University of Wisconsin. Major…

Integrated modeling tool for performance engineering of complex computer systems

NASA Technical Reports Server (NTRS)

Wright, Gary; Ball, Duane; Hoyt, Susan; Steele, Oscar

1989-01-01

This report summarizes Advanced System Technologies' accomplishments on the Phase 2 SBIR contract NAS7-995. The technical objectives of the report are: (1) to develop an evaluation version of a graphical, integrated modeling language according to the specification resulting from the Phase 2 research; and (2) to determine the degree to which the language meets its objectives by evaluating ease of use, utility of two sets of performance predictions, and the power of the language constructs. The technical approach followed to meet these objectives was to design, develop, and test an evaluation prototype of a graphical, performance prediction tool. The utility of the prototype was then evaluated by applying it to a variety of test cases found in the literature and in AST case histories. Numerous models were constructed and successfully tested. The major conclusion of this Phase 2 SBIR research and development effort is that complex, real-time computer systems can be specified in a non-procedural manner using combinations of icons, windows, menus, and dialogs. Such a specification technique provides an interface that system designers and architects find natural and easy to use. In addition, PEDESTAL's multiview approach provides system engineers with the capability to perform the trade-offs necessary to produce a design that meets timing performance requirements. Sample system designs analyzed during the development effort showed that models could be constructed in a fraction of the time required by non-visual system design capture tools.

76 FR 9607 - Notice of Proposed Information Collection for Technical Evaluation Surveys

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... Information Collection for Technical Evaluation Surveys AGENCY: Office of Surface Mining Reclamation and... information collection request for its Technical Evaluation customer surveys has been forwarded to the Office of Management and Budget (OMB) for review and comment. The information collection request describes...

Analysis of energy-saving potential in residential buildings in Xiamen City and its policy implications for southern China

NASA Astrophysics Data System (ADS)

Guo, Fei

The buildings sector is the largest energy-consuming sector in the world. Residential buildings consume about three-quarters of the final energy in the buildings sector. Promoting residential energy savings is in consequence critical for addressing many energy-use-related environmental challenges, such as climate change and air pollution. Given China's robust economic growth and fast urbanization, it is now a critical time to develop policy interventions on residential energy use in the nation. With this as a background, this dissertation explores effective policy intervention opportunities in southern China through analyzing the residential energy-saving potential, using the city of Xiamen as a case study. Four types of residential energy-saving potential are analyzed: technical potential, economic potential, maximum achievable potential (MAP), and possible achievable potential (PAP). Of these, the first two types are characterized as static theoretical evaluation, while the last two represent dynamic evaluation within a certain time horizon. The achievable potential analyses are rarely seen in existing literature. The analytical results reveal that there exists a significant technical potential for residential energy savings of about 20.9-24.9% in the city of Xiamen. Of the technical potential, about two-thirds to four-fifths are cost-effective from the government or society perspective. The cost-effectiveness is evaluated by comparing the "Levelized Cost of Conserved Energy (LCOCE)" of available advanced technical measures with the "Actual Cost" of conserved energy. The "Actual Cost" of energy is defined by adding the environmental externalities costs and hidden government subsidies over the retail prices of energy. The achievable potential analyses are particularly based on two key realistic factors: 1) the gradual ramping-up adoption process of advanced technical measures; and 2) individuals' adoption-decision making on them. For implementing the achievable potential analyses in Xiamen, a residential energy consumption (REC) projection model specifically tailored for southern China is developed. This computational model builds on the Kastovich (1982) adoption-decision theory and the general logic used in the U.S. EIA's (2003) National Energy Modeling System (NEMS). Base on this projection model, Xiamen's REC from the base year 2011 to 2020 is projected. This model can be used as a policy analysis tool to quantitatively evaluate the real-world impact of diverse policy incentives on residential energy use in southern China. The projection results show that the MAP of residential energy savings in Xiamen will be about only 8.3-8.4% in 2020 from a business-as-usual projection. Ten current appropriate and feasible policy interventions are evaluated for analyzing the PAP in Xiamen, which reveals that only about one-fourth to one-half of Xiamen's MAP will possibly be achieved in 2020. Based on the potential analysis for the Xiamen case, a discussion on promoting energy-saving incentive policies for the residential buildings in southern China is given. It suggests that more new, innovative and market-based policies need to be introduced in China in order to realize larger achievable potential for residential energy savings.

An Input Evaluation of Three Technical Assistance Needs Assessment Strategies.

ERIC Educational Resources Information Center

Suarez, Tanya M.; Cox, James O.

The Technical Assistance Development System--TADS (a project to provide technical assistance to personnel implementing programs for preschool handicapped children and their families) conducted an evaluation of three technical assistance needs assessment strategies during 1979-80. The three strategies were: (1) on-site--conducted by a trained needs…

Application of Support Vector Machine to Forex Monitoring

NASA Astrophysics Data System (ADS)

Kamruzzaman, Joarder; Sarker, Ruhul A.

Previous studies have demonstrated superior performance of artificial neural network (ANN) based forex forecasting models over traditional regression models. This paper applies support vector machines to build a forecasting model from the historical data using six simple technical indicators and presents a comparison with an ANN based model trained by scaled conjugate gradient (SCG) learning algorithm. The models are evaluated and compared on the basis of five commonly used performance metrics that measure closeness of prediction as well as correctness in directional change. Forecasting results of six different currencies against Australian dollar reveal superior performance of SVM model using simple linear kernel over ANN-SCG model in terms of all the evaluation metrics. The effect of SVM parameter selection on prediction performance is also investigated and analyzed.

Development of a Cross-Disciplinary Investigative Model for the Introduction of Microarray Techniques at Non-R1 Undergraduate Institutions

ERIC Educational Resources Information Center

Walker, David E.; Lutz, Gary P.; Alvarez, Consuelo J.

2008-01-01

Integrating advanced biological techniques into instruction at non-R1 institutions can prove to be a challenge. Here, we report the creation of a model for the introduction of gene expression microarray technology into a research laboratory. A student assessment tool was used to evaluate: (1) technical skill development; (2) cross-disciplinary…

A method for building evaluation competency among community-based organizations.

PubMed

Kelly, Cheryl M; LaRose, Jessi; Scharff, Darcell P

2014-05-01

Community-based organizations often lack the capacity (e.g., time, staff, skills) to effectively evaluate programs, policies, and environmental changes. Providing evaluation technical assistance and training can be an effective and feasible way to build individual evaluation competency. The purpose of this article is to present a practical approach and related tools that can be used by evaluators and others (e.g., academic partners, funders) providing assistance to build evaluation skills in community organizations. The approach described was developed in collaboration with local universities and a regional health foundation to provide intensive technical support to 19 community-based organizations awarded funding to implement obesity prevention projects. Technical assistance processes and tools were designed to be tailored to organizations' capacity and needs and can be used as templates by others who provide technical assistance. Evaluators, funders, and academic partners can use lessons learned from this experience to help shape and implement evaluation technical assistance approaches with community-based organizations.

Evaluation Statistics Computed for the Wave Information Studies (WIS)

DTIC Science & Technology

2016-07-01

Studies (WIS) by Mary A. Bryant, Tyler J. Hesser, and Robert E. Jensen PURPOSE: This Coastal and Hydraulics Engineering Technical Note (CHETN...describes the statistical metrics used by the Wave Information Studies (WIS) and produced as part of the model evaluation process. INTRODUCTION: The...gauge locations along the Pacific, Great Lakes, Gulf of Mexico , Atlantic, and Western Alaska coasts. Estimates of wave climatology produced by ocean

Space Flight Resource Management Training for International Space Station Flight Controllers

NASA Technical Reports Server (NTRS)

O'Keefe, William S.

2011-01-01

Training includes both SFRM-dedicated lessons and SFRM training embedded into technical lessons. Goal is to reduce certification times by 50% and integrated simulations by 75-90%. SFRM is practiced, evaluated and debriefed in part task trainers and full-task simulation lessons. SFRM model and training are constantly being evaluated against student/management feedback, best practices from industry/ military, and latest research.

1983-84 Evaluation Report of Vocational and Technical Education in South Carolina.

ERIC Educational Resources Information Center

South Carolina State Advisory Council on Vocational and Technical Education, Columbia.

This evaluation report contains a series of articles on vocational and technical education encompassing the 1983-84 school year. The articles, collectively, are intended to give an overall picture of vocational and technical education programs in South Carolina. The lead article on technical education strongly urges several changes to bring about…

Evaluation of Service Level Agreement Approaches for Portfolio Management in the Financial Industry

NASA Astrophysics Data System (ADS)

Pontz, Tobias; Grauer, Manfred; Kuebert, Roland; Tenschert, Axel; Koller, Bastian

The idea of service-oriented Grid computing seems to have the potential for fundamental paradigm change and a new architectural alignment concerning the design of IT infrastructures. There is a wide range of technical approaches from scientific communities which describe basic infrastructures and middlewares for integrating Grid resources in order that by now Grid applications are technically realizable. Hence, Grid computing needs viable business models and enhanced infrastructures to move from academic application right up to commercial application. For a commercial usage of these evolutions service level agreements are needed. The developed approaches are primary of academic interest and mostly have not been put into practice. Based on a business use case of the financial industry, five service level agreement approaches have been evaluated in this paper. Based on the evaluation, a management architecture has been designed and implemented as a prototype.

User Evaluation of the NASA Technical Report Server Recommendation Service

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Bollen, Johan; Calhoun, JoAnne R.; Mackey, Calvin E.

2004-01-01

We present the user evaluation of two recommendation server methodologies implemented for the NASA Technical Report Server (NTRS). One methodology for generating recommendations uses log analysis to identify co-retrieval events on full-text documents. For comparison, we used the Vector Space Model (VSM) as the second methodology. We calculated cosine similarities and used the top 10 most similar documents (based on metadata) as recommendations . We then ran an experiment with NASA Langley Research Center (LaRC) staff members to gather their feedback on which method produced the most quality recommendations. We found that in most cases VSM outperformed log analysis of co-retrievals. However, analyzing the data revealed the evaluations may have been structurally biased in favor of the VSM generated recommendations. We explore some possible methods for combining log analysis and VSM generated recommendations and suggest areas of future work.

User Evaluation of the NASA Technical Report Server Recommendation Service

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Bollen, Johan; Calhoun, JoAnne R.; Mackey, Calvin E.

2004-01-01

We present the user evaluation of two recommendation server methodologies implemented for the NASA Technical Report Server (NTRS). One methodology for generating recommendations uses log analysis to identify co-retrieval events on full-text documents. For comparison, we used the Vector Space Model (VSM) as the second methodology. We calculated cosine similarities and used the top 10 most similar documents (based on metadata) as 'recommendations'. We then ran an experiment with NASA Langley Research Center (LaRC) staff members to gather their feedback on which method produced the most 'quality' recommendations. We found that in most cases VSM outperformed log analysis of co-retrievals. However, analyzing the data revealed the evaluations may have been structurally biased in favor of the VSM generated recommendations. We explore some possible methods for combining log analysis and VSM generated recommendations and suggest areas of future work.

Development of techniques and data for evaluating ride quality. Volume 2 : ride-quality research

DOT National Transportation Integrated Search

1978-03-01

Ride-quality models for city buses and intercity trains are presented : and discussed in terms of their ability to predict passenger : comfort and ride acceptability. : This, the second of three volumes, contains a technical discussion, : of the ride...

77 FR 41919 - Hearing Aid Compatibility Technical Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

.... SUMMARY: The Wireless Telecommunications Bureau and the Office of Engineering and Technology (Bureaus) adopt the 2011 ANSI Standard for evaluating the hearing aid compatibility of wireless phones. The Bureaus take this action to ensure that a selection of digital wireless handset models is available to...

Advanced prediction technique for the low speed aerodynamics of V/STOL aircraft. Volume 1: Technical discussion

NASA Technical Reports Server (NTRS)

Beatty, T. D.; Worthey, M. K.

1984-01-01

The V/STOL Aircraft Propulsive Effects (VAPE) computerized prediction method is evaluated. The program analyzes viscous effects, various jet, inlet, and Short TakeOff and Landing (STOL) models, and examines the aerodynamic configurations of V/STOL aircraft.

Estimation of frequency based flood peak for an ungauged watershed using field calibration : technical summary.

DOT National Transportation Integrated Search

1997-06-01

This report presents: (1) calculation of flood frequency for the Ward Creek watershed using eight flood prediction models, (2) establishment of the rating curve (stage-discharge relation) for the Ward Creek watershed, (3) evaluation of these flood pr...

Integrating Safety and Mission Assurance into Systems Engineering Modeling Practices

NASA Technical Reports Server (NTRS)

Beckman, Sean; Darpel, Scott

2015-01-01

During the early development of products, flight, or experimental hardware, emphasis is often given to the identification of technical requirements, utilizing such tools as use case and activity diagrams. Designers and project teams focus on understanding physical and performance demands and challenges. It is typically only later, during the evaluation of preliminary designs that a first pass, if performed, is made to determine the process, safety, and mission quality assurance requirements. Evaluation early in the life cycle, though, can yield requirements that force a fundamental change in design. This paper discusses an alternate paradigm for using the concepts of use case or activity diagrams to identify safety hazard and mission quality assurance risks and concerns using the same systems engineering modeling tools being used to identify technical requirements. It contains two examples of how this process might be used in the development of a space flight experiment, and the design of a Human Powered Pizza Delivery Vehicle, along with the potential benefits to decrease development time, and provide stronger budget estimates.

Patient-specific rehearsal prior to EVAR: a pilot study.

PubMed

Desender, L; Rancic, Z; Aggarwal, R; Duchateau, J; Glenck, M; Lachat, M; Vermassen, F; Van Herzeele, I

2013-06-01

This study aims to evaluate feasibility, face validity, influence on technical factors and subjective sense of utility of patient-specific rehearsal (PsR) prior to endovascular aortic aneurysm repair (EVAR). A prospective, multicentre pilot study. Patients suitable for EVAR were enrolled and a three-dimensional (3D) model of the patient's anatomy was generated. Less than 24 h prior to the real case, rehearsals were conducted in the laboratory or clinical angiosuite. Technical metrics were recorded during both procedures. A subjective questionnaire was used to evaluate realism, technical and human factor aspects (scale 1-5). Ten patients were enrolled. In one case, the treatment plan was altered based on PsR. In 7/9 patients, the rehearsal significantly altered the optimal C-arm position for the proximal landing zone and an identical fluoroscopy angle was chosen in the real procedure. All team members found the rehearsal useful for selecting the optimal fluoroscopy angle (median 4). The realism of the EVAR procedure simulation was rated highly (median 4). All team members found the PsR useful to prepare the individual team members and the entire team (median 4). PsR for EVAR permits creation of realistic case studies. Subjective evaluation indicates that it may influence optimal C-arm angles and be valuable to prepare the entire team. A randomised controlled trial (RCT) is planned to evaluate how this technology may influence technical and team performance, ultimately leading to improved patient safety. Copyright © 2013 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Electrification Futures Study: A Technical Evaluation of the Impacts of an

Science.gov Websites

Technical Evaluation of the Impacts of an Electrified U.S. Energy System Electrification Futures Study: A Technical Evaluation of the Impacts of an Electrified U.S. Energy System Illustration showing various impacts of widespread electrification in the United States. In addition to NREL, the research team

[Discussion on Technical Evaluation for Medical Device Registration Material].

PubMed

Chu, Yungao; Qian, Hong; Zhu, Yingfeng

2017-07-30

This article first introduces the main contents of the requirements for medical device registration. Secondly, this article chooses the vertebral forming surgery system as an example to discuss the technical evaluation for the registration research material. The article hopes to provide a reference for the applicant who prepare the registration material and the technical evaluator who make the evaluation for the medical device registration.

Shoreline Change and Storm-Induced Beach Erosion Modeling: A Collection of Seven Papers

DTIC Science & Technology

1990-03-01

reducing, and analyzing the data in a systematic manner. Most physical data needed for evaluating and interpreting shoreline and beach evolution processes...proposed development concepts using both physical and numerical models. b. Analyzed and interpreted model results. c. Provided technical documentation of... interpret study results in the context required for "Confirmation" hearings. 26 The Corps of Engineers, Los Angeles District (SPL), has also begun studies

Fluoroscopic removal of retrievable self-expandable metal stents in patients with malignant oesophageal strictures: Experience with a non-endoscopic removal system.

PubMed

Kim, Pyeong Hwa; Song, Ho-Young; Park, Jung-Hoon; Zhou, Wei-Zhong; Na, Han Kyu; Cho, Young Chul; Jun, Eun Jung; Kim, Jun Ki; Kim, Guk Bae

2017-03-01

To evaluate clinical outcomes of fluoroscopic removal of retrievable self-expandable metal stents (SEMSs) for malignant oesophageal strictures, to compare clinical outcomes of three different removal techniques, and to identify predictive factors of successful removal by the standard technique (primary technical success). A total of 137 stents were removed from 128 patients with malignant oesophageal strictures. Primary overall technical success and removal-related complications were evaluated. Logistic regression models were constructed to identify predictive factors of primary technical success. Primary technical success rate was 78.8 % (108/137). Complications occurred in six (4.4 %) cases. Stent location in the upper oesophagus (P=0.004), stricture length over 8 cm (P=0.030), and proximal granulation tissue (P<0.001) were negative predictive factors of primary technical success. If granulation tissue was present at the proximal end, eversion technique was more frequently required (P=0.002). Fluoroscopic removal of retrievable SEMSs for malignant oesophageal strictures using three different removal techniques appeared to be safe and easy. The standard technique is safe and effective in the majority of patients. The presence of proximal granulation tissue, stent location in the upper oesophagus, and stricture length over 8 cm were negative predictive factors for primary technical success by standard extraction and may require a modified removal technique. • Fluoroscopic retrievable SEMS removal is safe and effective. • Standard removal technique by traction is effective in the majority of patients. • Three negative predictive factors of primary technical success were identified. • Caution should be exercised during the removal in those situations. • Eversion technique is effective in cases of proximal granulation tissue.

An Internet of Things platform architecture for supporting ambient assisted living environments.

PubMed

Tsirmpas, Charalampos; Kouris, Ioannis; Anastasiou, Athanasios; Giokas, Kostas; Iliopoulou, Dimitra; Koutsouris, Dimitris

2017-01-01

Internet of Things (IoT) is the logical further development of today's Internet, enabling a huge amount of devices to communicate, compute, sense and act. IoT sensors placed in Ambient Assisted Living (AAL) environments, enable the context awareness and allow the support of the elderly in their daily routines, ultimately allowing an independent and safe lifestyle. The vast amount of data that are generated and exchanged between the IoT nodes require innovative context modeling approaches that go beyond currently used models. Current paper presents and evaluates an open interoperable platform architecture in order to utilize the technical characteristics of IoT and handle the large amount of generated data, as a solution to the technical requirements of AAL applications.

Evaluation model of distribution network development based on ANP and grey correlation analysis

NASA Astrophysics Data System (ADS)

Ma, Kaiqiang; Zhan, Zhihong; Zhou, Ming; Wu, Qiang; Yan, Jun; Chen, Genyong

2018-06-01

The existing distribution network evaluation system cannot scientifically and comprehensively reflect the distribution network development status. Furthermore, the evaluation model is monotonous and it is not suitable for horizontal analysis of many regional power grids. For these reason, this paper constructs a set of universal adaptability evaluation index system and model of distribution network development. Firstly, distribution network evaluation system is set up by power supply capability, power grid structure, technical equipment, intelligent level, efficiency of the power grid and development benefit of power grid. Then the comprehensive weight of indices is calculated by combining the AHP with the grey correlation analysis. Finally, the index scoring function can be obtained by fitting the index evaluation criterion to the curve, and then using the multiply plus operator to get the result of sample evaluation. The example analysis shows that the model can reflect the development of distribution network and find out the advantages and disadvantages of distribution network development. Besides, the model provides suggestions for the development and construction of distribution network.

Predictive validity of a selection centre testing non-technical skills for recruitment to training in anaesthesia.

PubMed

Gale, T C E; Roberts, M J; Sice, P J; Langton, J A; Patterson, F C; Carr, A S; Anderson, I R; Lam, W H; Davies, P R F

2010-11-01

Assessment centres are an accepted method of recruitment in industry and are gaining popularity within medicine. We describe the development and validation of a selection centre for recruitment to speciality training in anaesthesia based on an assessment centre model incorporating the rating of candidate's non-technical skills. Expert consensus identified non-technical skills suitable for assessment at the point of selection. Four stations-structured interview, portfolio review, presentation, and simulation-were developed, the latter two being realistic scenarios of work-related tasks. Evaluation of the selection centre focused on applicant and assessor feedback ratings, inter-rater agreement, and internal consistency reliability coefficients. Predictive validity was sought via correlations of selection centre scores with subsequent workplace-based ratings of appointed trainees. Two hundred and twenty-four candidates were assessed over two consecutive annual recruitment rounds; 68 were appointed and followed up during training. Candidates and assessors demonstrated strong approval of the selection centre with more than 70% of ratings 'good' or 'excellent'. Mean inter-rater agreement coefficients ranged from 0.62 to 0.77 and internal consistency reliability of the selection centre score was high (Cronbach's α=0.88-0.91). The overall selection centre score was a good predictor of workplace performance during the first year of appointment. An assessment centre model based on the rating of non-technical skills can produce a reliable and valid selection tool for recruitment to speciality training in anaesthesia. Early results on predictive validity are encouraging and justify further development and evaluation.

Monoscopic photogrammetry to obtain 3D models by a mobile device: a method for making facial prostheses.

PubMed

Salazar-Gamarra, Rodrigo; Seelaus, Rosemary; da Silva, Jorge Vicente Lopes; da Silva, Airton Moreira; Dib, Luciano Lauria

2016-05-25

The aim of this study is to present the development of a new technique to obtain 3D models using photogrammetry by a mobile device and free software, as a method for making digital facial impressions of patients with maxillofacial defects for the final purpose of 3D printing of facial prostheses. With the use of a mobile device, free software and a photo capture protocol, 2D captures of the anatomy of a patient with a facial defect were transformed into a 3D model. The resultant digital models were evaluated for visual and technical integrity. The technical process and resultant models were described and analyzed for technical and clinical usability. Generating 3D models to make digital face impressions was possible by the use of photogrammetry with photos taken by a mobile device. The facial anatomy of the patient was reproduced by a *.3dp and a *.stl file with no major irregularities. 3D printing was possible. An alternative method for capturing facial anatomy is possible using a mobile device for the purpose of obtaining and designing 3D models for facial rehabilitation. Further studies must be realized to compare 3D modeling among different techniques and systems. Free software and low cost equipment could be a feasible solution to obtain 3D models for making digital face impressions for maxillofacial prostheses, improving access for clinical centers that do not have high cost technology considered as a prior acquisition.

77 FR 37710 - Notice of Proposed Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... to continue the collection of information for two technical training program course effectiveness... approval. This collection is for OSM's Technical Training Program Course Effectiveness Evaluations (1029... collection activity: Title: Technical Training Program Course Effectiveness Evaluation. OMB Control Number...

Quality Assurance Project Plan - Modeling the Impact of Hydraulic Fracturing on Water Resources Based on Water Acquisition Scenarios

EPA Pesticide Factsheets

This planning document describes the quality assurance/quality control activities and technical requirements that will be used during the research study. The goal of this project is to evaluate the potential impacts of large volume water withdrawals.

77 FR 58526 - Pacific Fishery Management Council; Public Meeting; Work Session To Review Proposed Salmon...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

... Fishery Management Council; Public Meeting; Work Session To Review Proposed Salmon Methodology Changes...), Commerce. ACTION: Notice of a public meeting. SUMMARY: The Pacific Fishery Management Council's Salmon Technical Team (STT), Scientific and Statistical Committee (SSC) Salmon Subcommittee, and Model Evaluation...

76 FR 54216 - Pacific Fishery Management Council (Council); Work Session To Review Proposed Salmon Methodology...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

... Fishery Management Council (Council); Work Session To Review Proposed Salmon Methodology Changes AGENCY.... ACTION: Notice of a public meeting. SUMMARY: The Pacific Fishery Management Council's Salmon Technical Team (STT), Scientific and Statistical Committee (SSC) Salmon Subcommittee, and Model Evaluation...

Building a regional health equity movement: the grantmaking model of a local health department.

PubMed

Baril, Nashira; Patterson, Meghan; Boen, Courtney; Gowler, Rebekah; Norman, Nancy

2011-01-01

The Boston Public Health Commission's Center for Health Equity and Social Justice provides grant funding, training, and technical assistance to 15 organizations and coalitions across New England to develop, implement, and evaluate community-based policy and systems change strategies that address social determinants of health and reduce racial and ethnic health inequities. This article describes Boston Public Health Commission's health equity framework, theory of change regarding the elimination of racial and ethnic health inequities, and current grantmaking model. To conclude, the authors evaluate the grant model and offer lessons learned from providing multiyear regional grants to promote health equity.

Knowledge-based model building of proteins: concepts and examples.

PubMed Central

Bajorath, J.; Stenkamp, R.; Aruffo, A.

1993-01-01

We describe how to build protein models from structural templates. Methods to identify structural similarities between proteins in cases of significant, moderate to low, or virtually absent sequence similarity are discussed. The detection and evaluation of structural relationships is emphasized as a central aspect of protein modeling, distinct from the more technical aspects of model building. Computational techniques to generate and complement comparative protein models are also reviewed. Two examples, P-selectin and gp39, are presented to illustrate the derivation of protein model structures and their use in experimental studies. PMID:7505680

Evaluation of colonoscopy technical skill levels by use of an objective kinematic-based system.

PubMed

Obstein, Keith L; Patil, Vaibhav D; Jayender, Jagadeesan; San José Estépar, Raúl; Spofford, Inbar S; Lengyel, Balazs I; Vosburgh, Kirby G; Thompson, Christopher C

2011-02-01

Colonoscopy requires training and experience to ensure accuracy and safety. Currently, no objective, validated process exists to determine when an endoscopist has attained technical competence. Kinematics data describing movements of laparoscopic instruments have been used in surgical skill assessment to define expert surgical technique. We have developed a novel system to record kinematics data during colonoscopy and quantitatively assess colonoscopist performance. To use kinematic analysis of colonoscopy to quantitatively assess endoscopic technical performance. Prospective cohort study. Tertiary-care academic medical center. This study involved physicians who perform colonoscopy. Application of a kinematics data collection system to colonoscopy evaluation. Kinematics data, validated task load assessment instrument, and technical difficulty visual analog scale. All 13 participants completed the colonoscopy to the terminal ileum on the standard colon model. Attending physicians reached the terminal ileum quicker than fellows (median time, 150.19 seconds vs 299.86 seconds; p<.01) with reduced path lengths for all 4 sensors, decreased flex (1.75 m vs 3.14 m; P=.03), smaller tip angulation, reduced absolute roll, and lower curvature of the endoscope. With performance of attending physicians serving as the expert reference standard, the mean kinematic score increased by 19.89 for each decrease in postgraduate year (P<.01). Overall, fellows experienced greater mental, physical, and temporal demand than did attending physicians. Small cohort size. Kinematic data and score calculation appear useful in the evaluation of colonoscopy technical skill levels. The kinematic score appears to consistently vary by year of training. Because this assessment is nonsubjective, it may be an improvement over current methods for determination of competence. Ongoing studies are establishing benchmarks and characteristic profiles of skill groups based on kinematics data. Copyright © 2011 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

Technical Guidelines for Environmental Dredging of Contaminated Sediments

DTIC Science & Technology

2008-09-01

health and ecological risk assessments . • Evaluate the need for and effectiveness of source control. • Evaluate potential remedies. • Document... risk , resource damage assessments , remedy selec- tion, and remedy design). It is therefore important to consult as many data users as possible (e.g...Contaminated Sediment Risks at Hazardous Waste Sites (USEPA 2002a). Risk Management Prin- ciple Number 4 is: “Develop and refine a conceptual site model that

Effectiveness of Prepared Instruction Units in Teaching the Principles of Internal Combustion Engine Operation and Maintenance. Technical Bulletin No. 192.

ERIC Educational Resources Information Center

Jacobs, Clinton O.

The report is an evaluation of the effectiveness of the 12 instructional units developed around the use of the Briggs-Stratton Model 80302, 3HP, 8 cu. in. displacement engine having a fuel induction system similar in construction to farm tractor types. The evaluation procedure used was the "one-group Pre-test and Post-test" research method. The…

Simulation of Electrical Characteristics of a Solar Panel

NASA Astrophysics Data System (ADS)

Obukhov, S.; Plotnikov, I.; Kryuchkova, M.

2016-06-01

The fast-growing photovoltaic system market leads to the necessity of the informed choice of major energy components and optimization of operating conditions in order to improve energy efficiency. Development of mathematical models of the main components of photovoltaic systems to ensure their comprehensive study is an urgent problem of improving and practical using of the technology of electrical energy production. The paper presents a mathematical model of the solar module implemented in the popular software MATLAB/Simulink. Equivalent circuit of the solar cell with a diode parallel without derived resistance is used for modelling. The serie8s resistance of the solar module is calculated by Newton's iterative method using the data of its technical specifications. It ensures high precision of simulation. Model validity was evaluated by the well-known technical characteristics of the module Solarex MSX 60. The calculation results of the experiment showed that the obtained current-voltage and current-watt characteristics of the model are compatible with those of the manufacturer.

Promoting Creative Thinking Ability Using Contextual Learning Model in Technical Drawing Achievement

NASA Astrophysics Data System (ADS)

Mursid, R.

2018-02-01

The purpose of this study is to determine whether there is influence; the differences in the results between students that learn drawing techniques taught by the Contextual Innovative Model (CIM) and taught by Direct Instructional Model (DIM), the differences in achievement among students of technical drawing that have High Creative Thinking Ability (HCTA) with Low Creative Thinking Ability (LCTA), and the interaction between the learning model with the ability to think creatively to the achievement technical drawing. Quasi-experimental research method. Results of research appoint that: the achievement of students that learned technical drawing by using CIM is higher than the students that learned technical drawing by using DIM, the achievement of students of technical drawings HCTA is higher than the achievement of students who have technical drawing LCTA, and there are interactions between the use of learning models and creative thinking abilities in influencing student achievement technical drawing.

Business Case Analysis of the Towed Gilder Air Launched System (TGALS)

NASA Technical Reports Server (NTRS)

Webb, Darryl W.; Nguyen, McLinton B.; Seibold, Robert W.; Wong, Frank C.; Budd, Gerald D.

2017-01-01

The Aerospace Corporation developed an integrated Business Case Analysis (BCA) model on behalf of the NASA Armstrong Flight Research Center (AFRC). This model evaluated the potential profitability of the Towed Glider Air Launched System (TGALS) concept, under development at AFRC, identifying potential technical, programmatic, and business decisions that could improve its business viability. The model addressed system performance metrics; development, production and operation cost estimates; market size and product service positioning; pricing alternatives; and market share.

Verification and Evaluation of Aquatic Contaminant Simulation Module (CSM)

DTIC Science & Technology

2016-08-01

RECOVERY model (Boyer et al. 1994, Ruiz et al. 2000) and Water- quality Analysis Simulation Program (WASP) model (Wool et al. 2006). This technical note (TN...bacteria, and detritus). Natural waters can contain a mixture of solid particles ranging from gravel (2 mm to 20 mm) or sand (0.07 mm to 2 mm) down to... quality perspective, cohesive sediments are usually of greater importance in water quality modeling. The chemical species in the active sediment

Development and implementation of centralized simulation training: evaluation of feasibility, acceptability and construct validity.

PubMed

Shamim Khan, Mohammad; Ahmed, Kamran; Gavazzi, Andrea; Gohil, Rishma; Thomas, Libby; Poulsen, Johan; Ahmed, Munir; Jaye, Peter; Dasgupta, Prokar

2013-03-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: A competent urologist should not only have effective technical skills, but also other attributes that would make him/her a complete surgeon. These include team-working, communication and decision-making skills. Although evidence for effectiveness of simulation exists for individual simulators, there is a paucity of evidence for utility and effectiveness of these simulators in training programmes that aims to combine technical and non-technical skills training. This article explains the process of development and validation of a centrally coordinated simulation program (Participants - South-East Region Specialist Registrars) under the umbrella of the British Association for Urological Surgeons (BAUS) and the London Deanery. This program incorporated training of both technical (synthetic, animal and virtual reality models) and non-technical skills (simulated operating theatres). To establish the feasibility and acceptability of a centralized, simulation-based training-programme. Simulation is increasingly establishing its role in urological training, with two areas that are relevant to urologists: (i) technical skills and (ii) non-technical skills. For this London Deanery supported pilot Simulation and Technology enhanced Learning Initiative (STeLI) project, we developed a structured multimodal simulation training programme. The programme incorporated: (i) technical skills training using virtual-reality simulators (Uro-mentor and Perc-mentor [Symbionix, Cleveland, OH, USA], Procedicus MIST-Nephrectomy [Mentice, Gothenburg, Sweden] and SEP Robotic simulator [Sim Surgery, Oslo, Norway]); bench-top models (synthetic models for cystocopy, transurethral resection of the prostate, transurethral resection of bladder tumour, ureteroscopy); and a European (Aalborg, Denmark) wet-lab training facility; as well as (ii) non-technical skills/crisis resource management (CRM), using SimMan (Laerdal Medical Ltd, Orpington, UK) to teach team-working, decision-making and communication skills. The feasibility, acceptability and construct validity of these training modules were assessed using validated questionnaires, as well as global and procedure/task-specific rating scales. In total 33, three specialist registrars of different grades and five urological nurses participated in the present study. Construct-validity between junior and senior trainees was significant. Of the participants, 90% rated the training models as being realistic and easy to use. In total 95% of the participants recommended the use of simulation during surgical training, 95% approved the format of the teaching by the faculty and 90% rated the sessions as well organized. A significant number of trainees (60%) would like to have easy access to a simulation facility to allow more practice and enhancement of their skills. A centralized simulation programme that provides training in both technical and non-technical skills is feasible. It is expected to improve the performance of future surgeons in a simulated environment and thus improve patient safety. © 2012 BJU International.

Modeling of technical soil-erosion control measures and its impact on soil erosion off-site effects within urban areas

NASA Astrophysics Data System (ADS)

Dostal, Tomas; Devaty, Jan

2013-04-01

The paper presents results of surface runoff, soil erosion and sediment transport modeling using Erosion 3D software - physically based mathematical simulation model, event oriented, fully distributed. Various methods to simulate technical soil-erosion conservation measures were tested, using alternative digital elevation models of different precision and resolution. Ditches and baulks were simulated by three different approaches, (i) by change of the land-cover parameters to increase infiltration and decrease flow velocity, (ii) by change of the land-cover parameters to completely infiltrate the surface runoff and (iii) by adjusting the height of the digital elevation model by "burning in" the channels of the ditches. Results show advantages and disadvantages of each approach and conclude suitable methods for combinations of particular digital elevation model and purpose of the simulations. Further on a set of simulations was carried out to model situations before and after technical soil-erosion conservation measures application within a small catchment of 4 km2. These simulations were focused on quantitative and qualitative assessment of technical soil-erosion control measures impact on soil erosion off-site effects within urban areas located downstream of intensively used agricultural fields. The scenarios were built upon a raster digital elevation model with spatial resolution of 3 meters derived from LiDAR 5G vector point elevation data. Use of this high-resolution elevation model allowed simulating the technical soil-erosion control measures by direct terrain elevation adjustment. Also the structures within the settlements were emulated by direct change in the elevation of the terrain model. The buildings were lifted up to simulate complicated flow behavior of the surface runoff within urban areas, using approach of Arévalo (Arévalo, 2011) but focusing on the use of commonly available data without extensive detailed editing. Application of the technical soil-erosion control measures induced strong change in overall amount of eroded/deposited material as well as spatial erosion/deposition patterns within the settlement areas. Validation of modeled scenarios and effects on measured data was not possible as no real runoff event was recorded in the target area so the conclusions were made by comparing the different modeled scenarios. Advantages and disadvantages of used approach to simulate technical soil-erosion conservation measures are evaluated and discussed as well as the impact of use of high-resolution elevation data on the intensity and spatial distribution of soil erosion and deposition. Model approved ability to show detailed distribution of damages over target urban area, which is very sensitive for off-site effects of surface runoff, soil erosion and sediment transport and also high sensitivity to input data, especially to DEM, which affects surface runoff pattern and therefore intensity of harmful effects. Acknowledgement: This paper has been supported by projects: Ministry of the interior of the CR VG 20122015092, and project NAZV QI91C008 TPEO.

NREL Suite of Tools for PV and Storage Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elgqvist, Emma M; Salasovich, James A

Many different factors such as the solar resource, technology costs and incentives, utility cost and consumption, space available, and financial parameters impact the technical and economic potential of a PV project. NREL has developed techno-economic modeling tools that can be used to evaluate PV projects at a site.

Evaluation of interactive highway safety design model crash prediction tools for two-lane rural roads on Kansas Department of Transportation projects : [technical summary].

DOT National Transportation Integrated Search

2014-01-01

Historically, project-level decisions for the selection of highway features to promote safety were based on either engineering judgment or adherence to accepted national guidance. These tools have allowed highway designers to produce facilities that ...

Bild- und Tontraeger im Fremdsprachenunterricht. Eine rentable Investition? (Visual and Sound Media in Foreign Language Teaching--A Profitable Investment?)

ERIC Educational Resources Information Center

Macht, Konrad

1978-01-01

Discusses a "rational concept" of integration of audiovisual teaching aids into the foreign language teaching process that would be based on a positive evaluation of teacher-centered instruction. Offers a model for integration of human and technical media. (IFS/WGA)

Improving linear accelerator service response with a real- time electronic event reporting system.

PubMed

Hoisak, Jeremy D P; Pawlicki, Todd; Kim, Gwe-Ya; Fletcher, Richard; Moore, Kevin L

2014-09-08

To track linear accelerator performance issues, an online event recording system was developed in-house for use by therapists and physicists to log the details of technical problems arising on our institution's four linear accelerators. In use since October 2010, the system was designed so that all clinical physicists would receive email notification when an event was logged. Starting in October 2012, we initiated a pilot project in collaboration with our linear accelerator vendor to explore a new model of service and support, in which event notifications were also sent electronically directly to dedicated engineers at the vendor's technical help desk, who then initiated a response to technical issues. Previously, technical issues were reported by telephone to the vendor's call center, which then disseminated information and coordinated a response with the Technical Support help desk and local service engineers. The purpose of this work was to investigate the improvements to clinical operations resulting from this new service model. The new and old service models were quantitatively compared by reviewing event logs and the oncology information system database in the nine months prior to and after initiation of the project. Here, we focus on events that resulted in an inoperative linear accelerator ("down" machine). Machine downtime, vendor response time, treatment cancellations, and event resolution were evaluated and compared over two equivalent time periods. In 389 clinical days, there were 119 machine-down events: 59 events before and 60 after introduction of the new model. In the new model, median time to service response decreased from 45 to 8 min, service engineer dispatch time decreased 44%, downtime per event decreased from 45 to 20 min, and treatment cancellations decreased 68%. The decreased vendor response time and reduced number of on-site visits by a service engineer resulted in decreased downtime and decreased patient treatment cancellations.

Consumer evaluation of complaint handling in the Dutch health insurance market.

PubMed

Wendel, Sonja; de Jong, Judith D; Curfs, Emile C

2011-11-15

How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and trust in the company to the same extent. Therefore, it is important for managers to be aware of the type of consumer satisfaction they are measuring when evaluating the handling of complaints within their company.

Evaluation of a proposed method for representing drug terminology.

PubMed Central

Cimino, J. J.; McNamara, T. J.; Meredith, T.; Broverman, C. A.; Eckert, K. C.; Moore, M.; Tyree, D. J.

1999-01-01

In the absence of a single, standard, multipurpose terminology for representing medications, the HL7 Vocabulary Technical Committee has sought to develop a model for such terms in a way that will provide a unified method for representing them and supporting interoperability among various terminology systems. We evaluated the preliminary model by obtaining terms, represented in our model, from three leading vendors of pharmacy system knowledge bases. A total of 2303 terms were obtained, and 3982 pair-wise comparisons were possible. We found that the components of the term descriptions matched 68-87% of the time and that the overall descriptions matched 53% of the time. The evaluation has identified a number of areas in the model where more rigorous definitions will be needed in order to improve the matching rate. This paper discusses the implications of these results. PMID:10566318

The Evaluation of the Effectiveness of ESP Courses in Enhancing Technical Translation Proficiency: A Case Study of ESP Course for Mechanical Engineering Students

ERIC Educational Resources Information Center

Hatam, Amir Hussein; Shafiei, Shilan

2012-01-01

The purpose of the present study was twofold. Firstly, it tried to investigate the relationship between the technical English proficiency of the students of Mechanical Engineering in the universities of Iran and their technical translation proficiency in translating technical texts of Mechanics. Secondly, it attempted to evaluate the effectiveness…

A Review and Evaluation of the Langley Research Center's Scientific and Technical Information Program. Results of Phase VI-The Technical Report: A Survey and Analysis.

ERIC Educational Resources Information Center

McCullough, Robert A.; And Others

This report presents the results of a review and evaluation of the Langley Research Center's scientific and technical information program, which examined technical reports from various institutions and organizations to determine the organization of reports, the language used to convey information, and the methods used to present information.…

A Novel Model for Teaching Primary Care in a Community Practice Setting: Tufts at Tech Community Veterinary Clinic.

PubMed

McCobb, Emily; Rozanski, Elizabeth A; Malcolm, Elizabeth L; Wolfus, Gregory; Rush, John E

Providing veterinary students with opportunities to develop clinical skills in a realistic, hands-on environment remains a challenge for veterinary education. We have developed a novel approach to teaching clinical medicine to fourth-year veterinary students and technical high school students via development of a primary care clinic embedded within a technical high school. The primary care clinic targets an underserved area of the community, which includes many of the participating high school students. Support from the veterinary community for the project has been strong as a result of communication, the opportunity for veterinarians to volunteer in the clinic, and the careful targeting of services. Benefits to veterinary students include the opportunity to build clinical competencies and confidence, as well as the exposure to a diverse client population. The financial model of the clinic is described and initial data on outcomes for case load, clinic income, veterinary student evaluations, and high school students' success in passing the veterinary assisting examination are reported. This clinical model, involving a partnership between a veterinary school and a technical high school, may be adoptable to other clinical teaching situations.

Modeling and management of water in the Klamath River Basin: overcoming politics and conflicts

USGS Publications Warehouse

Flug, Marshall; Scott, John F.; Abt, Steven R.; Young-Pezeshk, Jayne; Watson, Chester C.

1998-01-01

The network flow model MODSIM, which was designed as a water quantity mass balance model for evaluating and selecting water management alternatives, has been applied to the Klamath River basin. A background of conflicting issues in the basin is presented. The complexity of water quantity model development, while satisfying the many stakeholders and involved special interest groups is discussed, as well as the efforts taken to have the technical model accepted and used, and overcome stakeholder criticism, skepticism, and mistrust of the government.

Managing drought risk with a computer model of the Raritan River Basin water-supply system in central New Jersey

USGS Publications Warehouse

Dunne, Paul; Tasker, Gary

1996-01-01

The reservoirs and pumping stations that comprise the Raritan River Basin water-supply system and its interconnections to the Delaware-Raritan Canal water-supply system, operated by the New Jersey Water Supply Authority (NJWSA), provide potable water to central New Jersey communities. The water reserve of this combined system can easily be depleted by an extended period of below-normal precipitation. Efficient operation of the combined system is vital to meeting the water-supply needs of central New Jersey. In an effort to improve the efficiency of the system operation, the U.S. Geological Survey (USGS), in cooperation with the NJWSA, has developed a computer model that provides a technical basis for evaluating the effects of alternative patterns of operation of the Raritan River Basin water-supply system. This fact sheet describes the model, its technical basis, and its operation.

Enhancing metaproteomics-The value of models and defined environmental microbial systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herbst, Florian-Alexander; Lünsmann, Vanessa; Kjeldal, Henrik

2016-01-21

Metaproteomics - the large-scale characterization of the entire protein complement of environmental microbiota at a given point in time - added unique features and possibilities to study environmental microbial communities and to unravel these “black boxes”. New technical challenges arose which were not an issue for classical proteome analytics before and choosing the appropriate model system applicable to the research question can be difficult. Here, we reviewed different model systems for metaproteome analysis. Following a short introduction to microbial communities and systems, we discussed the most used systems ranging from technical systems over rhizospheric models to systems for the medicalmore » field. This includes acid mine drainage, anaerobic digesters, activated sludge, planted fixed bed reactors, gastrointestinal simulators and in vivo models. Model systems are useful to evaluate the challenges encountered within (but not limited to) metaproteomics, including species complexity and coverage, biomass availability or reliable protein extraction. The implementation of model systems can be considered as a step forward to better understand microbial responses and ecological distribution of member organisms. In the future, novel improvements are necessary to fully engage complex environmental systems.« less

An approach for software-driven and standard-based support of cross-enterprise tumor boards.

PubMed

Mangesius, Patrick; Fischer, Bernd; Schabetsberger, Thomas

2015-01-01

For tumor boards, the networking of different medical disciplines' expertise continues to gain importance. However, interdisciplinary tumor boards spread across several institutions are rarely supported by information technology tools today. The aim of this paper is to point out an approach for a tumor board management system prototype. For analyzing the requirements, an incremental process was used. The requirements were surveyed using Informal Conversational Interview and documented with Use Case Diagrams defined by the Unified Modeling Language (UML). Analyses of current EHR standards were conducted to evaluate technical requirements. Functional and technical requirements of clinical conference applications were evaluated and documented. In several steps, workflows were derived and application mockups were created. Although there is a vast amount of common understanding concerning how clinical conferences should be conducted and how their workflows should be structured, these are hardly standardized, neither on a functional nor on a technical level. This results in drawbacks for participants and patients. Using modern EHR technologies based on profiles such as IHE Cross Enterprise document sharing (XDS), these deficits could be overcome.

Ambulatory polysomnography using a new programmable amplifier system with on-line digitization of data: technical and clinical findings.

PubMed

Drewes, A M; Nielsen, K D; Taagholt, S J; Svendsen, L; Bjerregård, K; Nielsson, L; Kristensen, L

1996-05-01

A new system for polysomnographic recording at home is presented. It consists of a 12 to 24-channel amplifier system with direct digitization of the polygraph signals using a portable computer. Sampling frequency, amplification and filter settings can be defined by the user, and the signals are evaluated at bedside. Technical testing proved a high signal/noise ratio, linear amplification and a good signal quality. Clinical testing of the first 100 recordings showed that they were acceptable for conventional sleep scoring in 98 cases. A comparison of two consecutive recordings was done in 9 healthy subjects and 11 patients with rheumatic disorders. Using conventional sleep staging, only a slight "first night effect" (FNE) was demonstrated in the sleep architecture. Power spectral analysis using autoregressive modeling demonstrated only a difference of power between the 2 nights in the beta (14.5-25 Hz) band. In conclusion, the usability and technical advantages make the system very suitable for ambulatory recordings and only a minimal FNE should be considered when results are evaluated.

A merged model of quality improvement and evaluation: maximizing return on investment.

PubMed

Woodhouse, Lynn D; Toal, Russ; Nguyen, Trang; Keene, DeAnna; Gunn, Laura; Kellum, Andrea; Nelson, Gary; Charles, Simone; Tedders, Stuart; Williams, Natalie; Livingood, William C

2013-11-01

Quality improvement (QI) and evaluation are frequently considered to be alternative approaches for monitoring and assessing program implementation and impact. The emphasis on third-party evaluation, particularly associated with summative evaluation, and the grounding of evaluation in the social and behavioral science contrast with an emphasis on the integration of QI process within programs or organizations and its origins in management science and industrial engineering. Working with a major philanthropic organization in Georgia, we illustrate how a QI model is integrated with evaluation for five asthma prevention and control sites serving poor and underserved communities in rural and urban Georgia. A primary foundation of this merged model of QI and evaluation is a refocusing of the evaluation from an intimidating report card summative evaluation by external evaluators to an internally engaged program focus on developmental evaluation. The benefits of the merged model to both QI and evaluation are discussed. The use of evaluation based logic models can help anchor a QI program in evidence-based practice and provide linkage between process and outputs with the longer term distal outcomes. Merging the QI approach with evaluation has major advantages, particularly related to enhancing the funder's return on investment. We illustrate how a Plan-Do-Study-Act model of QI can (a) be integrated with evaluation based logic models, (b) help refocus emphasis from summative to developmental evaluation, (c) enhance program ownership and engagement in evaluation activities, and (d) increase the role of evaluators in providing technical assistance and support.

Entrained-flow gasification at elevated pressure: Volume 1: Final technical report, March 1, 1985-April 30,1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hedman, P.O.; Smoot, L.D.; Smith, P.J.

1987-10-15

The general purpose of this research program was to develop a basic understanding of the physical and chemical processes in entrained coal gasification and to use the results to improve and evaluate an entrained gasification computer model. The first task included the collection and analysis of in-situ gasifier data at elevated pressures with three coal types (North Dakota lignite, Wyoming subbituminous and Illinois bituminous), the design, construction, and testing of new coal/oxygen/steam injectors with a fourth coal type (Utah bituminous), the collection of supporting turbulent fluid dynamic (LDV) data from cold-flow studies, and the investigation of the feasibility of usingmore » laser-based (CARS) daignostic instruments to make measurements in coal flames. The second task included improvements to the two-dimensional gasifier submodels, tabulation and evaluation of new coal devolatilization and char oxidation data for predictions, fundamental studies of turbulent particle dispersion, the development of improved numerical methods, and validation of the comprehensive model through comparison of predictions with experimental results. The third task was to transfer technical advances to industry and to METC through technical seminars, production of a detailed data book, code placement, and publication of results. Research results for these three tasks are summarized briefly here and presented in detail in the body of the report and in supporting references. 202 refs., 73 figs., 23 tabs.« less

Improving CTE Student Retention and Transfer at Rend Lake College with Degree Audit and Reengagment Strategies. Pathways to Results: Implementation Partnerships Strategy Brief

ERIC Educational Resources Information Center

Rockey, Marci

2016-01-01

Rend Lake College (RLC) has participated in several Pathways to Results (PTR) projects over the last five years. The PTR model has been an essential tool to drive evidence-based changes throughout the College. In 2015, RLC used the PTR Model to evaluate institutional processes related to the Perkins Career and Technical Education (CTE) Student…

7 CFR Exhibit B-1 to Subpart I of... - Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants

Code of Federal Regulations, 2013 CFR

2013-01-01

... to Subpart I of Part 1944—Instructions for Preparation of Evaluation Report of Self-Help Technical... 7 Agriculture 13 2013-01-01 2013-01-01 false Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants B Exhibit B-1 to Subpart I of Part 1944 Agriculture Regulations...

7 CFR Exhibit B-1 to Subpart I of... - Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants

Code of Federal Regulations, 2014 CFR

2014-01-01

... to Subpart I of Part 1944—Instructions for Preparation of Evaluation Report of Self-Help Technical... 7 Agriculture 13 2014-01-01 2013-01-01 true Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants B Exhibit B-1 to Subpart I of Part 1944 Agriculture Regulations...

7 CFR Exhibit B-1 to Subpart I of... - Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants

Code of Federal Regulations, 2012 CFR

2012-01-01

... to Subpart I of Part 1944—Instructions for Preparation of Evaluation Report of Self-Help Technical... 7 Agriculture 13 2012-01-01 2012-01-01 false Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants B Exhibit B-1 to Subpart I of Part 1944 Agriculture Regulations...

Development and application of air quality models at the US ...

EPA Pesticide Factsheets

Overview of the development and application of air quality models at the U.S. EPA, particularly focused on the development and application of the Community Multiscale Air Quality (CMAQ) model developed within the Computation Exposure Division (CED) of the National Exposure Research Laboratory (NERL). This presentation will provide a simple overview of air quality model development and application geared toward a non-technical student audience. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

High-fidelity simulation-based team training in urology: evaluation of technical and nontechnical skills of urology residents during laparoscopic partial nephrectomy.

PubMed

Abdelshehid, Corollos S; Quach, Stephen; Nelson, Corey; Graversen, Joseph; Lusch, Achim; Zarraga, Jerome; Alipanah, Reza; Landman, Jaime; McDougall, Elspeth M

2013-01-01

The use of low-risk simulation training for resident education is rapidly expanding as teaching centers integrate simulation-based team training (SBTT) sessions into their education curriculum. SBTT is a valuable tool in technical and communication skills training and assessment for residents. We created a unique SBTT scenario for urology residents involving a laparoscopic partial nephrectomy procedure. Urology residents were randomly paired with a certified registered nurse anesthetists or an anesthesia resident. The scenario incorporated a laparoscopic right partial nephrectomy utilizing a unique polyvinyl alcohol kidney model with an embedded 3cm lower pole exophytic tumor and the high-fidelity SimMan3G mannequin. The Urology residents were instructed to pay particular attention to the patient's identifying information provided at the beginning of the case. Two scripted events occurred, the patient had an anaphylactic reaction to a drug and, after tumor specimen was sent for a frozen section, the confederate pathologist called into the operating room (OR) twice, first with the wrong patient name and subsequently with the wrong specimen. After the scenario was complete, technical performance and nontechnical performance were evaluated and assessed. A debriefing session followed the scenario to discuss and assess technical performance and interdisciplinary nontechnical communication between the team. All Urology residents (n = 9) rated the SBTT scenario as a useful tool in developing communication skills among the OR team and 88% rated the model as useful for technical skills training. Despite cuing to note patient identification, only 3 of 9 (33%) participants identified that the wrong patient information was presented when the confederate "pathologist" called in to report pathology results. All urology residents rated SBTT sessions as useful for the development of communication skills between different team members and making residents aware of unlikely but potential critical errors in the OR. We will continue to use SBTT as a useful method to develop resident technical and nontechnical skills outside of the high-risk operating environment. Copyright © 2013 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Evaluation of Lower East Fork Poplar Creek Mercury Sources - Model Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ketelle, Richard; Brandt, Craig C.; Peterson, Mark J.

The purpose of this report is to assess new data that has become available and provide an update to the evaluations and modeling presented in the Oak Ridge National Laboratory (ORNL) Technical Manuscript Evaluation of lower East Fork Poplar Creek (LEFPC) Mercury Sources (Watson et al., 2016). Primary sources of field and laboratory data for this update include multiple US Department of Energy (DOE) programs including Environmental Management (EM; e.g., Biological Monitoring and Abatement Program, Mercury Remediation Technology Development [TD], and Applied Field Research Initiative), Office of Science (Mercury Science Focus Areas [SFA] project), and the Y-12 National Security Complexmore » (Y-12) Compliance Department.« less

OCD: The offshore and coastal dispersion model. Volume 1. User's guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

DiCristofaro, D.C.; Hanna, S.R.

1989-11-01

The Offshore and Coastal Dispersion (OCD) Model has been developed to simulate the effect of offshore emissions from point, area, or line sources on the air quality of coastal regions. The OCD model was adapted from the EPA guideline model MPTER (EPA, 1980). Modifications were made to incorporate overwater plume transport and dispersion as well as changes that occur as the plume crosses the shoreline. This is a revised OCD model, the fourth version to date. The volume is the User's Guide which includes a Model overview, technical description, user's instructions, and notes on model evaluation and results.

Non-Functional Property Driven Service Governance: Performance Implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Yan; Zhu, Liming; Bass, Len

2007-09-17

Service governance is a set of businesses processes, policies and technical solutions that support enterprises in their implementation and management of their SOA. The decisions of service governance, especially concerning service boundaries at the enterprise level, influence the deployment topology of business services across or within business organizations. Deployment topologies are realized by integration technologies such as Enterprise Service Bus (ESB). Service governance and technical solutions interact in a subtle way including through communication patterns and protocols between services and ESBs, as well as the deployment and configuration of ESB. These factors have a strong influence on the Non- Functionalmore » Properties (NFP) of a SOA solution. A systematic approach is essential to understand alternative technical solutions for a specific service governance decision. This paper proposes a modeling approach to evaluate the performance-related NFP impacts when mapping service governance to technical solutions using an ESB. This approach is illustrated by the quantitative performance analysis of a real« less

Integrating Space Flight Resource Management Skills into Technical Lessons for International Space Station Flight Controller Training

NASA Technical Reports Server (NTRS)

Baldwin, Evelyn

2008-01-01

The Johnson Space Center s (JSC) International Space Station (ISS) Space Flight Resource Management (SFRM) training program is designed to teach the team skills required to be an effective flight controller. It was adapted from the SFRM training given to Shuttle flight controllers to fit the needs of a "24 hours a day/365 days a year" flight controller. More recently, the length reduction of technical training flows for ISS flight controllers impacted the number of opportunities for fully integrated team scenario based training, where most SFRM training occurred. Thus, the ISS SFRM training program is evolving yet again, using a new approach of teaching and evaluating SFRM alongside of technical materials. Because there are very few models in other industries that have successfully tied team and technical skills together, challenges are arising. Despite this, the Mission Operations Directorate of NASA s JSC is committed to implementing this integrated training approach because of the anticipated benefits.

Test and Evaluation of the Navy Technical Information Presentation System (NTIPS) F-14A Field Test Results

DTIC Science & Technology

1988-09-01

Test and Evaluation Report Test and Evaluation of the Navy Technical Information Presentation System (NTIPS) F-14A Field Test Results by .0 Joseph J...PROGRAM PROJECT TASK WORK UNIT Washington, D.C. 20361 ELEMENT NO. NO. NO. ACCESSION NO. OMN 1820 11. TITLE (Include Security Classification) TEST AND...EVALUATION OF THE NAVY TECHNICAL INFORMATION PRESENTATION SYSTEM (NTIPS) F-14A FIELD TEST RESULTS 12. PERSONAL AUTHOR(S) Fuller, Joseph F. (DTRC) Post

Towards a Credibility Assessment of Models and Simulations

NASA Technical Reports Server (NTRS)

Blattnig, Steve R.; Green, Lawrence L.; Luckring, James M.; Morrison, Joseph H.; Tripathi, Ram K.; Zang, Thomas A.

2008-01-01

A scale is presented to evaluate the rigor of modeling and simulation (M&S) practices for the purpose of supporting a credibility assessment of the M&S results. The scale distinguishes required and achieved levels of rigor for a set of M&S elements that contribute to credibility including both technical and process measures. The work has its origins in an interest within NASA to include a Credibility Assessment Scale in development of a NASA standard for models and simulations.

The integrated model of smartphone adoption: hedonic and utilitarian value perceptions of smartphones among Korean college students.

PubMed

Chun, Heasun; Lee, Hyunjoo; Kim, Daejoong

2012-09-01

This study aims to propose an integrated model of smartphone adoption that incorporates social influences (SIs), perceived technicality, as well as hedonic and utilitarian attitudes into the technology acceptance model. The proposed model was empirically evaluated by using survey data collected from 239 Korean college students to investigate their perception and attitudes toward smartphone adoption intention. Our results show that users' attitudes and their adoption intention are highly influenced by SI and positive self-image. This implies that a smartphone is a symbolic product that can signal affiliation and enhance the users' status in a group. The results also indicate that hedonic enjoyment is equally important as utilitarian usefulness in predicting the adoption intention, and the two variables mediate the relationships between SI, positive self-image, perceived technicality, and the intention to use. Consequently, the results reveal that smartphones are convergent media that can be viewed as both task-oriented and entertainment-oriented devices.

Evaluating Technical Communication Faculty: Some Empirically-Based Criteria and Guidelines. Draft.

ERIC Educational Resources Information Center

Stevenson, Dwight W.

As technical communication is a young academic discipline, evaluating technical communication faculty for promotion, tenure, and merit purposes requires special awareness and care. To determine reasonable expectations of faculty achievement, a study documented the range, types, and frequency of activities of 12 professors and 12 associate…

48 CFR 315.306 - Exchanges with offerors after receipt of proposals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... establishment of the competitive range. The Project Officer or technical evaluation panel shall develop technical questions as part of the technical evaluation report. The questions shall disclose the ambiguities... practicable, all questions and answers shall be in writing. The Contracting Officer shall give each offeror in...

41 CFR 105-50.001-5 - Specialized or technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., technical tests and evaluations, technical information, training activities, surveys, reports, documents... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Specialized or technical... TECHNICAL SERVICES TO STATE AND LOCAL UNITS OF GOVERNMENT § 105-50.001-5 Specialized or technical services...

48 CFR 313.106-2 - Evaluation of quotations or offers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Evaluation of quotations... Evaluation of quotations or offers. (b)(5) Technical Evaluation. When conducting a technical evaluation of quotations or proposals received under FAR Part 13, the provisions of 315.305(a)(3) apply. ...

Non-technical skills assessment in surgery.

PubMed

Sharma, Bharat; Mishra, Amit; Aggarwal, Rajesh; Grantcharov, Teodor P

2011-09-01

Adverse events in surgery have highlighted the importance of non-technical skills, such as communication, decision-making, teamwork, situational awareness and leadership, to effective organizational performance. These skills carry particular importance to surgical oncology, as members of a multidisciplinary team must work cohesively to formulate effective patient care plans. Several non-technical skills evaluation tools have been developed for use in surgery, without adequate comparison and consensus on which should be standard for training. Eleven articles describing the use of three non-technical evaluation tools related to surgery: NOTSS (Non Technical Skills for Surgeons), NOTECHS (Non Technical Skills) and OTAS (Observational Teamwork Assessment for Surgery) were analyzed with respect to scale formulation, validity, reliability and feasibility. Furthermore, their use in training thus far and the future of non-technical rating scales in surgical curricula was discussed. Future work should focus on incorporating these assessment tools into training and into a real operating room setting to provide formative evaluations for surgical residents. Copyright © 2010 Elsevier Ltd. All rights reserved.

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya

PubMed Central

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-01-01

Abstract The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client–provider consultation sessions. The cross-sectional study observed 366 client–provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63–0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07–14.21), adequate infrastructure (5.29; 95% CI: 2.89–7.69) and reagents (1.48; 95% CI: 1.02–1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92–4.36), job satisfaction (2.02; 95% CI: 1.21–2.83) and supervision (1.01; 95% CI: 0.35–1.68), while workload (−0.88; 95% CI: −1.75 to − 0.01) was negatively associated. Technical quality of the client–provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client–provider consultation sessions as measured by both health facility structural and provider factors. PMID:29194543

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya.

PubMed

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-11-01

The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client-provider consultation sessions. The cross-sectional study observed 366 client-provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63-0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07-14.21), adequate infrastructure (5.29; 95% CI: 2.89-7.69) and reagents (1.48; 95% CI: 1.02-1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92-4.36), job satisfaction (2.02; 95% CI: 1.21-2.83) and supervision (1.01; 95% CI: 0.35-1.68), while workload (-0.88; 95% CI: -1.75 to - 0.01) was negatively associated. Technical quality of the client-provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client-provider consultation sessions as measured by both health facility structural and provider factors. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

International Land Model Benchmarking (ILAMB) Workshop Report, Technical Report DOE/SC-0186

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffman, Forrest M.; Koven, Charles D.; Kappel-Aleks, Gretchen

2016-11-01

As Earth system models become increasingly complex, there is a growing need for comprehensive and multi-faceted evaluation of model projections. To advance understanding of biogeochemical processes and their interactions with hydrology and climate under conditions of increasing atmospheric carbon dioxide, new analysis methods are required that use observations to constrain model predictions, inform model development, and identify needed measurements and field experiments. Better representations of biogeochemistry–climate feedbacks and ecosystem processes in these models are essential for reducing uncertainties associated with projections of climate change during the remainder of the 21st century.

Modeling technical change in climate analysis: evidence from agricultural crop damages.

PubMed

Ahmed, Adeel; Devadason, Evelyn S; Al-Amin, Abul Quasem

2017-05-01

This study accounts for the Hicks neutral technical change in a calibrated model of climate analysis, to identify the optimum level of technical change for addressing climate changes. It demonstrates the reduction to crop damages, the costs to technical change, and the net gains for the adoption of technical change for a climate-sensitive Pakistan economy. The calibrated model assesses the net gains of technical change for the overall economy and at the agriculture-specific level. The study finds that the gains of technical change are overwhelmingly higher than the costs across the agriculture subsectors. The gains and costs following technical change differ substantially for different crops. More importantly, the study finds a cost-effective optimal level of technical change that potentially reduces crop damages to a minimum possible level. The study therefore contends that the climate policy for Pakistan should consider the role of technical change in addressing climate impacts on the agriculture sector.

Development and validation of a nursing professionalism evaluation model in a career ladder system.

PubMed

Kim, Yeon Hee; Jung, Young Sun; Min, Ja; Song, Eun Young; Ok, Jung Hui; Lim, Changwon; Kim, Kyunghee; Kim, Ji-Su

2017-01-01

The clinical ladder system categorizes the degree of nursing professionalism and rewards and is an important human resource tool for managing nursing. We developed a model to evaluate nursing professionalism, which determines the clinical ladder system levels, and verified its validity. Data were collected using a clinical competence tool developed in this study, and existing methods such as the nursing professionalism evaluation tool, peer reviews, and face-to-face interviews to evaluate promotions and verify the presented content in a medical institution. Reliability and convergent and discriminant validity of the clinical competence evaluation tool were verified using SmartPLS software. The validity of the model for evaluating overall nursing professionalism was also analyzed. Clinical competence was determined by five dimensions of nursing practice: scientific, technical, ethical, aesthetic, and existential. The structural model explained 66% of the variance. Clinical competence scales, peer reviews, and face-to-face interviews directly determined nursing professionalism levels. The evaluation system can be used for evaluating nurses' professionalism in actual medical institutions from a nursing practice perspective. A conceptual framework for establishing a human resources management system for nurses and a tool for evaluating nursing professionalism at medical institutions is provided.

Project STRIDE: Services for Transition to Independence through Education. Final Report, July 1988-June 1990 [and] Manual.

ERIC Educational Resources Information Center

Ross-Gordon, Jovita M.; And Others

The Services for Transition to Independence through Education (STRIDE) project evaluated a model for providing comprehensive training and employment services to adults with mild handicaps, using existing vocational education classes and special needs support programs in a secondary vocational technical school in Altoona, Pennsylvania. Services…

Evaluating the Implementation Fidelity of Technology Immersion and Its Relationship with Student Achievement

ERIC Educational Resources Information Center

Shapley, Kelly S.; Sheehan, Daniel; Maloney, Catherine; Caranikas-Walker, Fanny

2010-01-01

In a pilot study of the Technology Immersion model, high-need middle schools were "immersed" in technology by providing a laptop for each student and teacher, wireless Internet access, curricular and assessment resources, professional development, and technical and pedagogical support. This article examines the fidelity of model…

Optimizing the experimental design using the house mouse (Mus musculus L.) as a model for determining grain feeding preferences

USDA-ARS?s Scientific Manuscript database

Technical Abstract: BACKGROUND: There is little research evaluating flavor preferences among wheat varieties. We previously demonstrated that mice exert very strong preferences when given binary mixtures of wheat varieties. We plan to utilize mice to identify varieties and genes associated with pref...

Application of the Virginia STEPS (Student/Teacher Education Planning System) by Basic Skills Education Teachers.

ERIC Educational Resources Information Center

Seguin, Barbara; Swanson, Lois

The Virginia STEPS (Student/Teacher Education Planning System) was developed to enable adult basic education (ABE) students to become independent learners responsible for planning, carrying out, evaluating, and making adjustments in their education. ABE instructors at Blackhawk Technical College in Wisconsin have adapted the STEPS model to make…

An Integrated Parent-Teacher-Related Service Team Approach to Communication Intervention. Final Report.

ERIC Educational Resources Information Center

Stremel, Kathleen; Wilson, Rebecca

This final report describes a federally funded 3-year project for integrating related services within educational objectives for children (ages 3-10) with dual vision and hearing impairments. A Training-Utilization model of inservice training and technical assistance was developed, implemented, and evaluated to address the communication needs of…

77 FR 69507 - Proposed Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

..., ``Revise Shutdown Margin Definition To Address Advanced Fuel Designs'' AGENCY: Nuclear Regulatory... Shutdown Margin Definition to Address Advanced Fuel Designs.'' DATES: Comment period expires on December 19... address newer BWR fuel designs, which may be more reactive at shutdown temperatures above 68[emsp14][deg]F...

A Bayesian Method for Evaluating Trainee Proficiency. Technical Paper 323.

ERIC Educational Resources Information Center

Epstein, Kenneth I.; Steinheiser, Frederick H., Jr.

A multiparameter, programmable model was developed to examine the interactive influence of certain parameters on the probability of deciding that an examinee had attained a specified degree of mastery. It was applied within the simulated context of performance testing of military trainees. These parameters included: (1) the number of assumed…

Perspectives on ... An Evaluation of Faculty Use of the Digital Library at Ankara University, Turkey

ERIC Educational Resources Information Center

Atilgan, Dogan; Bayram, Ozlem

2006-01-01

New consortial buying models have dramatically increased the availability of online resources, particularly journal articles, in the universities and technical institutes of developing countries. The degree of acceptance and pattern of use of such materials is of great interest to library collection development. Ankara University surveyed faculty…

Reaching the International Student. Tig-Toe: Teaching of Evaluation.

ERIC Educational Resources Information Center

Eastmond, Nick

This brief paper describes a special, informal seminar for international students that used an adjunct instruction model to focus on technical terminology in the field of instructional technology. Foreign students are enrolled concurrently in two linked courses--a language course and a content course with the two courses sharing content base and…

Structures Division

NASA Technical Reports Server (NTRS)

1997-01-01

The NASA Lewis Research Center Structures Division is an international leader and pioneer in developing new structural analysis, life prediction, and failure analysis related to rotating machinery and more specifically to hot section components in air-breathing aircraft engines and spacecraft propulsion systems. The research consists of both deterministic and probabilistic methodology. Studies include, but are not limited to, high-cycle and low-cycle fatigue as well as material creep. Studies of structural failure are at both the micro- and macrolevels. Nondestructive evaluation methods related to structural reliability are developed, applied, and evaluated. Materials from which structural components are made, studied, and tested are monolithics and metal-matrix, polymer-matrix, and ceramic-matrix composites. Aeroelastic models are developed and used to determine the cyclic loading and life of fan and turbine blades. Life models are developed and tested for bearings, seals, and other mechanical components, such as magnetic suspensions. Results of these studies are published in NASA technical papers and reference publication as well as in technical society journal articles. The results of the work of the Structures Division and the bibliography of its publications for calendar year 1995 are presented.

Structures Division 1994 Annual Report

NASA Technical Reports Server (NTRS)

1996-01-01

The NASA Lewis Research Center Structures Division is an international leader and pioneer in developing new structural analysis, life prediction, and failure analysis related to rotating machinery and more specifically to hot section components in air-breathing aircraft engines and spacecraft propulsion systems. The research consists of both deterministic and probabilistic methodology. Studies include, but are not limited to, high-cycle and low-cycle fatigue as well as material creep. Studies of structural failure are at both the micro- and macrolevels. Nondestructive evaluation methods related to structural reliability are developed, applied, and evaluated. Materials from which structural components are made, studied, and tested are monolithics and metal-matrix, polymer-matrix, and ceramic-matrix composites. Aeroelastic models are developed and used to determine the cyclic loading and life of fan and turbine blades. Life models are developed and tested for bearings, seals, and other mechanical components, such as magnetic suspensions. Results of these studies are published in NASA technical papers and reference publication as well as in technical society journal articles. The results of the work of the Structures Division and the bibliography of its publications for calendar year 1994 are presented.

A model to determine financial indicators for organic solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Colin; Bender, Timothy; Lawryshyn, Yuri

2009-11-15

Organic solar cells are an emerging photovoltaic technology that is inexpensive and easy to manufacture, despite low efficiency and stability. A model, named TEEOS (Technical and Economic Evaluator for Organic Solar), is presented that evaluates organic solar cells for various solar energy applications in different geographic locations, in terms of two financial indicators, payback period and net present value (NPV). TEEOS uses SMARTS2 software to estimate broadband (280-4000 nm) spectral irradiance data and with the use of a cloud modification factor, predicts hourly irradiation in the absence of actual broadband irradiance data, which is scarce for most urban locations. Bymore » using the avoided cost of electricity, annual savings are calculated which produce the financial indicators. It is hoped that these financial indicators can help guide certain technical decisions regarding the direction of research for organic solar cells, for example, increasing efficiency or increasing the absorptive wavelength range. A sample calculation using solar hats is shown to be uneconomical, but a good example of large-scale organic PV production. (author)« less

STP 4-06 Model-Based Technical Data in Procurement, 3D PDF Technology Data Demonstration Project. Phase 1 Summary

DTIC Science & Technology

2015-07-01

O R G STP 4-06 MODEL-BASED TECHNICAL DATA IN PROCUREMENT 3D PDF TECHNOLOGY DATA DEMONSTRATION PROJECT PHASE 1 SUMMARY REPORT DL309T2...LMI’s ISO- certified quality management procedures. J U L Y 2 0 1 5 STP 4-06 MODEL-BASED TECHNICAL DATA IN PROCUREMENT 3D PDF TECHNICAL DATA...Based Technical Data ..................................................................................... 5 3D PDF Demonstration Team

A procedural skills OSCE: assessing technical and non-technical skills of internal medicine residents.

PubMed

Pugh, Debra; Hamstra, Stanley J; Wood, Timothy J; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-03-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal medicine (IM) residents to assess their technical and non-technical skills when performing procedures. Thirty-five first to third-year IM residents participated in a 5-station PS-OSCE, which combined partial task models, standardized patients, and allied health professionals. Formal blueprinting was performed and content experts were used to develop the cases and rating instruments. Examiners underwent a frame-of-reference training session to prepare them for their rater role. Scores were compared by levels of training, experience, and to evaluation data from a non-procedural OSCE (IM-OSCE). Reliability was calculated using Generalizability analyses. Reliabilities for the technical and non-technical scores were 0.68 and 0.76, respectively. Third-year residents scored significantly higher than first-year residents on the technical (73.5 vs. 62.2%) and non-technical (83.2 vs. 75.1%) components of the PS-OSCE (p < 0.05). Residents who had performed the procedures more frequently scored higher on three of the five stations (p < 0.05). There was a moderate disattenuated correlation (r = 0.77) between the IM-OSCE and the technical component of the PS-OSCE scores. The PS-OSCE is a feasible method for assessing multiple competencies related to performing procedures and this study provides validity evidence to support its use as an in-training examination.

Evaluation of the instream flow incremental methodology by U.S. Fish and Wildlife Service field users

USGS Publications Warehouse

Armour, Carl L.; Taylor, Jonathan G.

1991-01-01

This paper summarizes results of a survey conducted in 1988 of 57 U.S. Fish and Wildlife Service field offices. The purpose was to document opinions of biologists experienced in applying the Instream Flow Incremental Methodology (IFIM). Responses were received from 35 offices where 616 IFIM applications were reported. The existence of six monitoring studies designed to evaluate the adequacy of flows provided at sites was confirmed. The two principal categories reported as stumbling blocks to the successful application of IFIM were beliefs that the methodology is technically too simplistic or that it is too complex to apply. Recommendations receiving the highest scores for future initiatives to enhance IFIM use were (1) training and workshops for field biologists; and (2) improving suitability index (SI) curves and computer models, and evaluating the relationship of weighted useable area (WUA) to fish responses. The authors concur that emphasis for research should be on addressing technical concerns about SI curves and WUA.

Space Shuttle/TDRSS communication and tracking systems analysis

NASA Astrophysics Data System (ADS)

Lindsey, W. C.; Chie, C. M.; Cideciyan, R.; Dessouky, K.; Su, Y. T.; Tsang, C. S.

1986-04-01

In order to evaluate the technical and operational problem areas and provide a recommendation, the enhancements to the Tracking and Data Delay Satellite System (TDRSS) and Shuttle must be evaluated through simulation and analysis. These enhancement techniques must first be characterized, then modeled mathematically, and finally updated into LinCsim (analytical simulation package). The LinCsim package can then be used as an evaluation tool. Three areas of potential enhancements were identified: shuttle payload accommodations, TDRSS SSA and KSA services, and shuttle tracking system and navigation sensors. Recommendations for each area were discussed.

Space Shuttle/TDRSS communication and tracking systems analysis

NASA Technical Reports Server (NTRS)

Lindsey, W. C.; Chie, C. M.; Cideciyan, R.; Dessouky, K.; Su, Y. T.; Tsang, C. S.

1986-01-01

In order to evaluate the technical and operational problem areas and provide a recommendation, the enhancements to the Tracking and Data Delay Satellite System (TDRSS) and Shuttle must be evaluated through simulation and analysis. These enhancement techniques must first be characterized, then modeled mathematically, and finally updated into LinCsim (analytical simulation package). The LinCsim package can then be used as an evaluation tool. Three areas of potential enhancements were identified: shuttle payload accommodations, TDRSS SSA and KSA services, and shuttle tracking system and navigation sensors. Recommendations for each area were discussed.

Proceedings of the Augmented VIsual Display (AVID) Research Workshop

NASA Technical Reports Server (NTRS)

Kaiser, Mary K. (Editor); Sweet, Barbara T. (Editor)

1993-01-01

The papers, abstracts, and presentations were presented at a three day workshop focused on sensor modeling and simulation, and image enhancement, processing, and fusion. The technical sessions emphasized how sensor technology can be used to create visual imagery adequate for aircraft control and operations. Participants from industry, government, and academic laboratories contributed to panels on Sensor Systems, Sensor Modeling, Sensor Fusion, Image Processing (Computer and Human Vision), and Image Evaluation and Metrics.

National Evaluation of the IDEA Technical Assistance & Dissemination Program. NCEE 2014-4000

ERIC Educational Resources Information Center

Daley,Tamara C.; Fiore, Thomas A.; Bollmer, Julie; Nimkoff, Tamara; Lysy, Chris

2013-01-01

Under the Individuals with Disabilities Education Act (IDEA), the Technical Assistance and Dissemination (TA&D) Program is the U.S. Department of Education's (ED) primary vehicle for providing technical assistance (TA) to individuals and organizations responsible for serving children with disabilities and their families. The evaluation is part…

Solar energy system economic evaluation for IBM System 3, Glendo, Wyoming

NASA Technical Reports Server (NTRS)

1980-01-01

This analysis was based on the technical and economic models in f-chart design procedures with inputs based on the characteristics of the parameters of present worth of system cost over a projected twenty year life: life cycle savings, year of positive savings, and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainties in constituent system and economic variables was also investigated.

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

State-of-the-art technologies applicable to silicon solar cell and solar cell module fabrication were assessed. The assessment consisted of a technical feasibility evaluation and a cost projection for high volume production of solar cell modules. Design equations based on minimum power loss were used as a tool in the evaluation of metallization technologies. A solar cell process sensitivity study using models, computer calculations, and experimental data was used to identify process step variation and cell output variation correlations.

Full immersion simulation: validation of a distributed simulation environment for technical and non-technical skills training in Urology.

PubMed

Brewin, James; Tang, Jessica; Dasgupta, Prokar; Khan, Muhammad S; Ahmed, Kamran; Bello, Fernando; Kneebone, Roger; Jaye, Peter

2015-07-01

To evaluate the face, content and construct validity of the distributed simulation (DS) environment for technical and non-technical skills training in endourology. To evaluate the educational impact of DS for urology training. DS offers a portable, low-cost simulated operating room environment that can be set up in any open space. A prospective mixed methods design using established validation methodology was conducted in this simulated environment with 10 experienced and 10 trainee urologists. All participants performed a simulated prostate resection in the DS environment. Outcome measures included surveys to evaluate the DS, as well as comparative analyses of experienced and trainee urologist's performance using real-time and 'blinded' video analysis and validated performance metrics. Non-parametric statistical methods were used to compare differences between groups. The DS environment demonstrated face, content and construct validity for both non-technical and technical skills. Kirkpatrick level 1 evidence for the educational impact of the DS environment was shown. Further studies are needed to evaluate the effect of simulated operating room training on real operating room performance. This study has shown the validity of the DS environment for non-technical, as well as technical skills training. DS-based simulation appears to be a valuable addition to traditional classroom-based simulation training. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

Movement evaluation of front crawl swimming: Technical skill versus aesthetic quality

PubMed Central

2017-01-01

The study aim was to compare expert with non-expert swimmers’ rating of the aesthetic and technical qualities of front crawl in video-taped recordings of swimmers with low, middle, and high level proficiency. The results suggest that: i) observers’ experience affects their judgment: only the expert observers correctly rated the swimmers’ proficiency level; ii) evaluation of movement (technical and aesthetic scores) is correlated with the level of skill as expressed in the kinematics of the observed action (swimming speed, stroke frequency, and stroke length); iii) expert and non-expert observers use different strategies to rate the aesthetic and technical qualities of movement: equating the technical skill with the aesthetic quality is a general rule non-expert observers follow in the evaluation of human movement. PMID:28886063

Field test of an autonomous wind-diesel power plant

NASA Astrophysics Data System (ADS)

Fritzsche, A.; Knoebel, U.; Ruckert, W.

1985-09-01

An autonomous power plant composed of a wind energy converter and a diesel generator was tested in laboratory and in the field to assess the wind energy supply as a noninfluenceable parameter in the regulation of the mono and bivalent operation of the power plant, for control of the dynamic behavior of the electrical components, for tuning of the regulation expenditure with comfort requirements, and for model evaluation of energy cost analysis. The interaction between meteorological, technical, economic and energy policy aspects was assessed. The relationship between economical use and comfort limits technical improvement. Development of the concept of a bivalent power supply with wind and diesel is recommended.

Impact of oscillations of shafts on machining accuracy using non-stationary machines

NASA Astrophysics Data System (ADS)

Fedorenko, M. A.; Bondarenko, J. A.; Pogonin, A. A.

2018-03-01

The solution of the problem of restoring parts and units of equipment of the large mass and size is possible on the basis of the development of the research base, including the development of models and theoretical relations, revealing complex reasons for causes of damage and equipment failure. This allows one to develop new effective technologies of maintenance and repair, implementation of which ensures the efficiency and durability of the machines. The development of new forms of technical maintenance and repair of equipment, based on a systematic evaluation of its technical condition with the help of modern diagnostic tools can significantly reduce the duration of the downtime.

Linking agent-based models and stochastic models of financial markets

PubMed Central

Feng, Ling; Li, Baowen; Podobnik, Boris; Preis, Tobias; Stanley, H. Eugene

2012-01-01

It is well-known that financial asset returns exhibit fat-tailed distributions and long-term memory. These empirical features are the main objectives of modeling efforts using (i) stochastic processes to quantitatively reproduce these features and (ii) agent-based simulations to understand the underlying microscopic interactions. After reviewing selected empirical and theoretical evidence documenting the behavior of traders, we construct an agent-based model to quantitatively demonstrate that “fat” tails in return distributions arise when traders share similar technical trading strategies and decisions. Extending our behavioral model to a stochastic model, we derive and explain a set of quantitative scaling relations of long-term memory from the empirical behavior of individual market participants. Our analysis provides a behavioral interpretation of the long-term memory of absolute and squared price returns: They are directly linked to the way investors evaluate their investments by applying technical strategies at different investment horizons, and this quantitative relationship is in agreement with empirical findings. Our approach provides a possible behavioral explanation for stochastic models for financial systems in general and provides a method to parameterize such models from market data rather than from statistical fitting. PMID:22586086

Linking agent-based models and stochastic models of financial markets.

PubMed

Feng, Ling; Li, Baowen; Podobnik, Boris; Preis, Tobias; Stanley, H Eugene

2012-05-29

It is well-known that financial asset returns exhibit fat-tailed distributions and long-term memory. These empirical features are the main objectives of modeling efforts using (i) stochastic processes to quantitatively reproduce these features and (ii) agent-based simulations to understand the underlying microscopic interactions. After reviewing selected empirical and theoretical evidence documenting the behavior of traders, we construct an agent-based model to quantitatively demonstrate that "fat" tails in return distributions arise when traders share similar technical trading strategies and decisions. Extending our behavioral model to a stochastic model, we derive and explain a set of quantitative scaling relations of long-term memory from the empirical behavior of individual market participants. Our analysis provides a behavioral interpretation of the long-term memory of absolute and squared price returns: They are directly linked to the way investors evaluate their investments by applying technical strategies at different investment horizons, and this quantitative relationship is in agreement with empirical findings. Our approach provides a possible behavioral explanation for stochastic models for financial systems in general and provides a method to parameterize such models from market data rather than from statistical fitting.

Modelling a suitable location for Urban Solid Waste Management using AHP method and GIS -A geospatial approach and MCDM Model

NASA Astrophysics Data System (ADS)

Iqbal, M.; Islam, A.; Hossain, A.; Mustaque, S.

2016-12-01

Multi-Criteria Decision Making(MCDM) is advanced analytical method to evaluate appropriate result or decision from multiple criterion environment. Present time in advanced research, MCDM technique is progressive analytical process to evaluate a logical decision from various conflict. In addition, Present day Geospatial approach (e.g. Remote sensing and GIS) also another advanced technical approach in a research to collect, process and analyze various spatial data at a time. GIS and Remote sensing together with the MCDM technique could be the best platform to solve a complex decision making process. These two latest process combined very effectively used in site selection for solid waste management in urban policy. The most popular MCDM technique is Weighted Linear Method (WLC) where Analytical Hierarchy Process (AHP) is another popular and consistent techniques used in worldwide as dependable decision making. Consequently, the main objective of this study is improving a AHP model as MCDM technique with Geographic Information System (GIS) to select a suitable landfill site for urban solid waste management. Here AHP technique used as a MCDM tool to select the best suitable landfill location for urban solid waste management. To protect the urban environment in a sustainable way municipal waste needs an appropriate landfill site considering environmental, geological, social and technical aspect of the region. A MCDM model generate from five class related which related to environmental, geological, social and technical using AHP method and input the result set in GIS for final model location for urban solid waste management. The final suitable location comes out that 12.2% of the area corresponds to 22.89 km2 considering the total study area. In this study, Keraniganj sub-district of Dhaka district in Bangladesh is consider as study area which is densely populated city currently undergoes an unmanaged waste management system especially the suitable landfill sites for waste dumping site.

48 CFR 1403.101-70 - Technical evaluators and advisors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical evaluators and advisors. 1403.101-70 Section 1403.101-70 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... resolved with the servicing Ethics Counselor. (c) During the evaluation process, each evaluator and advisor...

Comparison of two intraosseous infusion systems for adult emergency medical use.

PubMed

Brenner, Thorsten; Bernhard, Michael; Helm, Matthias; Doll, Sara; Völkl, Alfred; Ganion, Nicole; Friedmann, Claudia; Sikinger, Marcus; Knapp, Jürgen; Martin, Eike; Gries, André

2008-09-01

The current guidelines of the European Resuscitation Council (ERC) stipulate that an intraosseous access should be placed if establishing a peripheral venous access for cardiopulmonary resuscitation (CPR) would involve delays. The aim of this study was therefore to compare a manual intraosseous infusion technique (MAN-IO) and a semi-automatic intraosseous infusion system (EZ-IO) using adult human cadavers as a model. After receiving verbal instruction and giving their written informed consent, the participants of the study were randomized into two groups (group I: MAN-IO, and group II: EZ-IO). In addition to the demographic data, the following were evaluated: (1) Number of attempts required to successfully place the infusion, (2) Insertion time, (3) Occurrence of technical complications and (4) User friendliness. Evaluation protocols from 84 study participants could be evaluated (MAN-IO: n=39 vs. EZ-IO: n=45). No significant differences were seen in the study participants' characteristics. Insertion times (MW+/-S.D.) of the respective successful attempts were comparable (MAN-IO: 33+/-28s vs. EZ-IO: 32+/-11s). When using the EZ-IO, the access was successfully established significantly more often on the first attempt (MAN-IO: 79.5% vs. EZ-IO: 97.8%; p<0.01). The EZ-IO was also found to have more advantages in terms of technical complications (MAN-IO: 15.4% vs. EZ-IO: 0.0%; p<0.01) and user friendliness (school grading system: MAN-IO: 1.9+/-0.7 vs. EZ-IO: 1.2+/-0.4; p<0.01). In an adult human cadaver model, the semi-automatic system was proven to be more effective. The EZ-IO gave more successful results, was associated with fewer technical complications, and is user friendlier.

Evaluation of input output efficiency of oil field considering undesirable output —A case study of sandstone reservoir in Xinjiang oilfield

NASA Astrophysics Data System (ADS)

Zhang, Shuying; Wu, Xuquan; Li, Deshan; Xu, Yadong; Song, Shulin

2017-06-01

Based on the input and output data of sandstone reservoir in Xinjiang oilfield, the SBM-Undesirable model is used to study the technical efficiency of each block. Results show that: the model of SBM-undesirable to evaluate its efficiency and to avoid defects caused by traditional DEA model radial angle, improve the accuracy of the efficiency evaluation. by analyzing the projection of the oil blocks, we find that each block is in the negative external effects of input redundancy and output deficiency benefit and undesirable output, and there are greater differences in the production efficiency of each block; the way to improve the input-output efficiency of oilfield is to optimize the allocation of resources, reduce the undesirable output and increase the expected output.

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

NASA Technical Reports Server (NTRS)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Evaluation of the functional performance and technical quality of an Electronic Documentation System of the Nursing Process.

PubMed

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2015-01-01

To evaluate the functional performance and the technical quality of the Electronic Documentation System of the Nursing Process of the Teaching Hospital of the University of São Paulo. exploratory-descriptive study. The Quality Model of regulatory standard 25010 and the Evaluation Process defined under regulatory standard 25040, both of the International Organization for Standardization/International Electrotechnical Commission. The quality characteristics evaluated were: functional suitability, reliability, usability, performance efficiency, compatibility, security, maintainability and portability. The sample was made up of 37 evaluators. in the evaluation of the specialists in information technology, only the characteristic of usability obtained a rate of positive responses of less than 70%. For the nurse lecturers, all the quality characteristics obtained a rate of positive responses of over 70%. The staff nurses of the medical and surgical clinics with experience in using the system) and staff nurses from other units of the hospital and from other health institutions (without experience in using the system) obtained rates of positive responses of more than 70% referent to the functional suitability, usability, and security. However, performance efficiency, reliability and compatibility all obtained rates below the parameter established. the software achieved rates of positive responses of over 70% for the majority of the quality characteristics evaluated.

75 FR 76468 - Office of the Assistant Secretary for Planning and Evaluation; Medicare Program; Meeting of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... Evaluation; Medicare Program; Meeting of the Technical Advisory Panel on Medicare Trustee Reports AGENCY... announces a public meeting of the Technical Advisory Panel on Medicare Trustee Reports (Panel). Notice of... long run. The Panel's discussion is expected to be very technical in nature and will focus on the...

Dynamic Modeling of Yield and Particle Size Distribution in Continuous Bayer Precipitation

NASA Astrophysics Data System (ADS)

Stephenson, Jerry L.; Kapraun, Chris

Process engineers at Alcoa's Point Comfort refinery are using a dynamic model of the Bayer precipitation area to evaluate options in operating strategies. The dynamic model, a joint development effort between Point Comfort and the Alcoa Technical Center, predicts process yields, particle size distributions and occluded soda levels for various flowsheet configurations of the precipitation and classification circuit. In addition to rigorous heat, material and particle population balances, the model includes mechanistic kinetic expressions for particle growth and agglomeration and semi-empirical kinetics for nucleation and attrition. The kinetic parameters have been tuned to Point Comfort's operating data, with excellent matches between the model results and plant data. The model is written for the ACSL dynamic simulation program with specifically developed input/output graphical user interfaces to provide a user-friendly tool. Features such as a seed charge controller enhance the model's usefulness for evaluating operating conditions and process control approaches.

Engineering analysis activities in support of susquehanna unit 1 startup testing and cycle 1 operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, G.D.; Kukielka, C.A.; Olson, L.M.

The engineering analysis group is responsible for all nuclear plant systems analysis and reactor analysis activities, excluding fuel management analysis, at Pennsylvania Power and Light Company. These activities include making pretest and posttest predictions of startup tests; analyzing unplanned or unexpected transient events; providing technical training to plant personnel; assisting in the development of emergency drill scenarios; providing engineering evaluations to support design and technical specification changes, and evaluating, assessing, and resolving a number of license conditions. Many of these activities have required the direct use of RETRAN models. Two RETRAN analyses that were completed to support plant operations -more » a pretest analysis of the turbine trip startup test, and a posttest analysis of the loss of startup transformer event - are investigated. For each case, RETRAN results are compared with available plant data and comparisons are drawn on the acceptability of the performance of the plant systems.« less

[Team training and assessment in mixed reality-based simulated operating room : Current state of research in the field of simulation in spine surgery exemplified by the ATMEOS project].

PubMed

Stefan, P; Pfandler, M; Wucherer, P; Habert, S; Fürmetz, J; Weidert, S; Euler, E; Eck, U; Lazarovici, M; Weigl, M; Navab, N

2018-04-01

Surgical simulators are being increasingly used as an attractive alternative to clinical training in addition to conventional animal models and human specimens. Typically, surgical simulation technology is designed for the purpose of teaching technical surgical skills (so-called task trainers). Simulator training in surgery is therefore in general limited to the individual training of the surgeon and disregards the participation of the rest of the surgical team. The objective of the project Assessment and Training of Medical Experts based on Objective Standards (ATMEOS) is to develop an immersive simulated operating room environment that enables the training and assessment of multidisciplinary surgical teams under various conditions. Using a mixed reality approach, a synthetic patient model, real surgical instruments and radiation-free virtual X‑ray imaging are combined into a simulation of spinal surgery. In previous research studies, the concept was evaluated in terms of realism, plausibility and immersiveness. In the current research, assessment measurements for technical and non-technical skills are developed and evaluated. The aim is to observe multidisciplinary surgical teams in the simulated operating room during minimally invasive spinal surgery and objectively assess the performance of the individual team members and the entire team. Moreover, the effectiveness of training methods and surgical techniques or success critical factors, e. g. management of crisis situations, can be captured and objectively assessed in the controlled environment.

Optimal Corrosion Control Treatment Evaluation Technical Recommendations

EPA Pesticide Factsheets

This document provides technical recommendations that both systems and primacy agencies can use to comply with LCR CCT requirements and effective evaluation and designation of optimal corrosion control treatment (OCCT).

A Cost-Effectiveness/Benefit Analysis Model for Postsecondary Vocational Programs. Technical Report.

ERIC Educational Resources Information Center

Kim, Jin Eun

A cost-effectiveness/benefit analysis is defined as a technique for measuring the outputs of existing and new programs in relation to their specified program objectives, against the costs of those programs. In terms of its specific use, the technique is conceptualized as a systems analysis method, an evaluation method, and a planning tool for…

Follow-Up of Online Instruction: Effectiveness of Peer Coaching Seminar Course. PRISM Technical Report.

ERIC Educational Resources Information Center

Hornberger, Breann

This paper presents an evaluation of the Peer Coaching Seminar Course offered through the Peer Coaching Rural Inservice Model (PRISM) project at the North Dakota Center for Persons with Disabilities. This online course was designed to help rural teachers learn both peer coaching and classroom management skills. Twenty first- or second-year…

User s Manual for Armor Stone Evaluation Model (ARMOR): Great Lakes Armor Stone Study

DTIC Science & Technology

2015-08-01

Broderick and Ahrens (1982) defined damage to an armor layer by the normalized eroded cross-section area as S = Ae/(Dn50)2, where Ae is the measured...84. Broderick , L., and J. P. Ahrens. 1982. Rip-rap stability scale effects. Technical Paper 82- 3. Vicksburg, MS: U.S. Army Engineer Waterways

Annual Research Progress Report Number 11, 1 July 1975-30 June 1976.

DTIC Science & Technology

1976-07-01

Herbert of Cherbury: A Preliminary Checklist .... ... ... ...................... 68 2. The Donne-Herbert Family Relationship ........ 68- - 3...Reflections in Organizational Strture and Managmnt Policies... ........................... 77 9. The Development of Aircraft and Doctrine in the Royal Flying...Recruit Quality and~ Its Relationship with Air Force Technical Traiin ... n ... ng ... 106 4. A Conceptual Model for Evaluating Contractor Management

A Learning Evaluation for an Immersive Virtual Laboratory for Technical Training Applied into a Welding Workshop

ERIC Educational Resources Information Center

Torres, Francisco; Neira Tovar, Leticia A.; del Rio, Marta Sylvia

2017-01-01

This study aims to explore the results of welding virtual training performance, designed using a learning model based on cognitive and usability techniques, applying an immersive concept focused on person attention. Moreover, it also intended to demonstrate that exits a moderating effect of performance improvement when the user experience is taken…

Expanding the Evaluation Department Role in a Restructuring District: A Technical Assistance Model.

ERIC Educational Resources Information Center

Borton, William M.

Although San Diego City Schools is entering its fourth year of restructuring efforts, many schools are still reluctant to assume the autonomy offered to them. If school restructuring is stalling, it is because district offices have not yet restructured, research on what is known about implementing changes has been ignored, and no clear methodology…

R. & D. in Psychometrics: Technical Reports on Latent Structure Models.

ERIC Educational Resources Information Center

Wilcox, Rand R.

This document contains three papers from the Methodology Project of the Center for the Study of Evaluation. Methods for characterizing test accuracy are reported in the first two papers. "Bounds on the K Out of N Reliability of a Test, and an Exact Test for Hierarchically Related Items" describes and illustrates how an extension of a…

Ladders to Success: Enhancing Transfer from Technical Associate in Science Degrees to Baccalaureates. AIR 1999 Annual Forum Paper.

ERIC Educational Resources Information Center

Pitter, Gita Wijesinghe

This paper describes the collaborative activities which have developed since 1998 Florida legislation that required stronger articulation between Associate in Science (AS) programs at state community colleges and baccalaureate programs at universities. Three major models of AS to baccalaureate articulation are evaluated: (1) a statewide career…

School Retrofit Design Analysis System. A Microcomputer Model for School Energy Use.

ERIC Educational Resources Information Center

Canipe, Stephen Lee

The School Retrofit Design Analysis System (SRDAS) developed in this study provides a non-technical method for the school administrator to use in evaluating alternative energy saving retrofit and new construction design possibilities. By providing a high degree of flexibility, SRDAS is applicable to a wide range of school building and retrofit…

List of U.S. Army Research Institute Research and Technical Publications: January 1, 1986 thru September 30, 1989

DTIC Science & Technology

1990-06-01

for Synthetic Validation for Entry- Level Army Jobs, Crafts, J. ; Szenas, P.L. ; Chia, W.J.; Pulakos, E.D. December 1988. (AD A205 438) This review...presents relevant literature in the areas of synthetic validation, job component models, and expert judgments. Synthetic validation is a logical...for synthetic validation, presents a model of the steps to establish linkages, reviews and evaluates synthetic validation studies in terms of how

Technical approach to groundwater restoration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-01

The Technical Approach to Groundwater Restoration (TAGR) provides general technical guidance to implement the groundwater restoration phase of the Uranium Mill Tailings Remedial Action (UMTRA) Project. The TAGR includes a brief overview of the surface remediation and groundwater restoration phases of the UMTRA Project and describes the regulatory requirements, the National Environmental Policy Act (NEPA) process, and regulatory compliance. A section on program strategy discusses program optimization, the role of risk assessment, the observational approach, strategies for meeting groundwater cleanup standards, and remedial action decision-making. A section on data requirements for groundwater restoration evaluates the data quality objectives (DQO) andmore » minimum data required to implement the options and comply with the standards. A section on sits implementation explores the development of a conceptual site model, approaches to site characterization, development of remedial action alternatives, selection of the groundwater restoration method, and remedial design and implementation in the context of site-specific documentation in the site observational work plan (SOWP) and the remedial action plan (RAP). Finally, the TAGR elaborates on groundwater monitoring necessary to evaluate compliance with the groundwater cleanup standards and protection of human health and the environment, and outlines licensing procedures.« less

Technical and economic assessment of processes for the production of butanol and acetone

NASA Technical Reports Server (NTRS)

1982-01-01

This report represents a preliminary technical and economic evaluation of a process which produces mixed solvents (butaol/acetone/ethanol) via fermentation of sugars derived from renewable biomass resources. The objective is to assess the technology of producing butanol/acetone from biomass, and select a viable process capable of serving as a base case model for technical and economic analysis. It is anticipated that the base case process developed herein can then be used as the basis for subsequent studies concerning biomass conversion processes capable of producing a wide range of chemicals. The general criteria utilized in determining the design basis for the process are profit potential and non-renewable energy displacement potential. The feedstock chosen, aspen wood, was selected from a number of potential renewable biomass resources as the most readily available in the United States and for its relatively large potential for producing reducing sugars.

Successful implementation of a wellness and tobacco cessation curriculum in psychosocial rehabilitation clubhouses

PubMed Central

2011-01-01

Background Tobacco remains a seemingly intractable problem for individuals living with severe and persistent mental illness. This study evaluated the implementation, technical assistance, and perceived impact of a model curriculum ("Learning About Healthy Living") to promote wellness and motivation to quit tobacco use in psychosocial rehabilitation clubhouses. Methods We used semi-structured interviews (n = 9) with clubhouse staff (n = 12) and a survey of participating clubhouse members (n = 271) in nine clubhouses. Results Fifty-eight percent of clubhouse participants completed surveys. Results showed tobacco users open to tobacco-free policies (62%) and perceiving more discussions about quitting tobacco with healthcare providers (69%). Analyses of staff interviews and member surveys revealed four key themes: (1) the curriculum was successfully implemented and appreciated; (2) technical assistance kept implementation on track; (3) adding wellness content and interactive components should enhance the curriculum; and, (4) the curriculum advanced other healthful policies and practices. Conclusions Mental health settings are important locations for implementing programs to address tobacco use. In this real-world implementation of a model curriculum in psychosocial rehabilitation clubhouses, the curriculum tested well, was feasible and well-received, and suggests potential impact on tobacco use outcomes. Revision, dissemination, and a randomized controlled trial evaluation of the model curriculum should now occur. PMID:21917179

Technical Evaluation Report of the Aerospace Medical Panel Working Group WG-08 on Evaluation of Methods to Assess Workload.

DTIC Science & Technology

1980-11-01

Occlusion 3.1 Single Measures 3. Primary Task 3.2 Multiple Measures 3.3 Math Modeling 4.1.1 PFF 4.1.2 CSR 4.1.3 M,0 4.1.4 MW 4.1.5 UG3 4.1.6 ZCP 4.1 Single... modeling methodology; and (4) validation of the analytic/predictive methodology In a system design, development, and test effort." Chapter 9: "A central...2.3 Occlusion P S P S S P -P 3.1 Single Measure-Primary S S S S S S S 3.2 Multiple Measure-Primary S S IS S S S S K 3.3 Math Modeling ~ 4.1.7 Eye and

Diabetic aggravation of stroke and animal models

PubMed Central

Rehni, Ashish K.; Liu, Allen; Perez-Pinzon, Miguel A.; Dave, Kunjan R.

2017-01-01

Cerebral ischemia in diabetics results in severe brain damage. Different animal models of cerebral ischemia have been used to study the aggravation of ischemic brain damage in the diabetic condition. Since different disease conditions such as diabetes differently affect outcome following cerebral ischemia, the Stroke Therapy Academic Industry Roundtable (STAIR) guidelines recommends use of diseased animals for evaluating neuroprotective therapies targeted to reduce cerebral ischemic damage. The goal of this review is to discuss the technicalities and pros/cons of various animal models of cerebral ischemia currently being employed to study diabetes-related ischemic brain damage. The rational use of such animal systems in studying the disease condition may better help evaluate novel therapeutic approaches for diabetes related exacerbation of ischemic brain damage. PMID:28274862

ED leadership competency matrix: an administrative management tool.

PubMed

Propp, Douglas A; Glickman, Seth; Uehara, Dennis T

2003-10-01

A successful ED relies on its leaders to master and demonstrate core competencies to be effective in the many arenas in which they interact and are responsible. A unique matrix model for the assessment of an ED leadership's key administrative skill sets is presented. The model incorporates capabilities related to the individual's cognitive aptitude, experience, acquired technical skills, behavioral characteristics, as well as the ability to manage relationships effectively. Based on the personnel inventory using the matrix, focused evaluation, development, and recruitment of ED key leaders occurs. This dynamic tool has provided a unique perspective for the evaluation and enhancement of overall ED leadership performance. It is hoped that incorporation of such a model will similarly improve the accomplishments of EDs at other institutions.

Exploring the Benefits of Teacher-Modeling Strategies Integrated into Career and Technical Education

ERIC Educational Resources Information Center

Cathers, Thomas J., Sr.

2013-01-01

This case study examined how career and technical education classes function using multiple instructional modeling strategies integrated into vocational and technical training environments. Seven New Jersey public school technical teachers received an introductory overview of the investigation and participated by responding to 10 open-end…

A stochastic dynamic model of a dairy farm to evaluate the technical and economic performance under different scenarios.

PubMed

Calsamiglia, S; Astiz, S; Baucells, J; Castillejos, L

2018-05-23

Dairy farms need to improve their competitiveness through decisions that are often difficult to evaluate because they are highly dependent on many economic and technical factors. The objective of this project was to develop a stochastic and dynamic mathematical model to simulate the functioning of a dairy farm to evaluate the effect of changes in technical or economic factors on performance and profitability. Submodels were developed for reproduction, feeding, diseases, heifers, environmental factors, facilities, management, and economics. All these submodels were simulated on an animal-by-animal and day-by-day basis. Default values for all variables are provided, but the user can change them. The outcome provides a list of technical and economic indicators essential for the decision-making process. Performance of the program was verified by evaluating the effects and sensitivity analysis of different scenarios in 20 different dairy farms. As an example, a case study of a dairy farm with 300 cows producing 40 L/d and a 12% pregnancy rate (PR) was used. The effect of using a time-fixed artificial insemination (TFAI) protocol in the first insemination at 77 d in milk, with 45 and 40% conception rates for first-lactation and older cows, respectively, and a cost of €13 was explored. During the 5-yr simulation, the TFAI increased PR (12 to 17%) and milk yield per milking cow (39.8 to 41.2 L/d) and reduced days to first AI (93 to 74), days open (143 to 116), and the proportion of problem cows (24.3 to 15.9%). In the TFAI, cows were dried 30 d earlier, resulting in more dry cows, and a smaller difference in milk yield by present cows (35.5 vs 36.0 L/d for control and TFAI, respectively). A longer productive life (2.56 vs. 2.79 yr) with shorter lactations in TFIA resulted in less first-lactation cows (42 vs 36%), 32 more calvings per year, and, therefore, more cases of postpartum diseases. Total (32.5 to 29.9%) and reproductive (10.5 vs 6.8%) culling rates decreased in TFIA. Overall, the net margin was €245 and €309/cow per year in control and TFIA, respectively. The net margin of applying TFAI decreased as PR of the farm increased, with limited benefit of TFAI at a PR of 30%. The model provides a powerful web-based tool to explore the short- and medium-term consequences of technical and economic decisions on the economic sustainability of dairy farms. © 2018, The Authors. Published by the Federation of Animal Science Societies and Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

Evaluation of a System of Electronic Documentation for the Nursing Process

PubMed Central

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2012-01-01

The objective of this study is to evaluate the functional performance and the technical quality of an electronic documentation system designed to document the data of the Nursing Process. The Model of Quality will be the one established by the ISO/IEC 25010. Such research will allow the spreading of the knowledge of an emerging area, thus adding a further initiative to the growing efforts made in the information technology area for health and nursing. PMID:24199110

Teachers' modeling advantage and their modeling effects on college students' learning styles and occupational stereotypes: a case of collaborative teaching in technical courses.

PubMed

Chiou, Wen-Bin; Yang, Chao-Chin

2006-01-01

In this study, modeling advantage that depicts the likelihood of a teacher model being imitated by students over other competing models in a particular class was developed to differentiate the rival modeling of two kinds of teachers (the technical teachers vs. the lecturing teachers) between college students' learning styles and occupational stereotypes in the collaborative teaching of technical courses. Results of a one-semester longitudinal study indicated that the students perceived a greater modeling advantage of the technical teachers than that of the lecturing teachers. Both the students' learning styles and occupational stereotypes were in accordance with those teachers as their role models. In general, the impact of the teachers' learning styles and occupational stereotypes on students appeared to be mediated by the teachers' modeling advantage. Administrators and curriculum designers should pay attention to the fact that the technical teachers appeared to exhibit greater modeling effects than the lecturing teachers in collaborative teaching.

A technical report on structural evaluation of the Meade County reinforced concrete bridge.

DOT National Transportation Integrated Search

2009-01-01

This is a technical report on the first phase of the evaluation of the Meade County reinforced concrete bridge. : The first three chapters introduce the main problem and provide a general review of the existing evaluation : methods and the procedures...

Use of an Objective Structured Assessment of Technical Skill After a Sports Medicine Rotation.

PubMed

Dwyer, Tim; Slade Shantz, Jesse; Kulasegaram, Kulamakan Mahan; Chahal, Jaskarndip; Wasserstein, David; Schachar, Rachel; Devitt, Brian; Theodoropoulos, John; Hodges, Brian; Ogilvie-Harris, Darrell

2016-12-01

The purpose of this study was to determine if the use of an Objective Structured Assessment of Technical skill (OSATS), using dry models, would be a valid method of assessing residents' ability to perform sports medicine procedures after training in a competency-based model. Over 18 months, 27 residents (19 junior [postgraduate year (PGY) 1-3] and 8 senior [PGY 4-5]) sat the OSATS after their rotation, in addition to 14 sports medicine staff and fellows. Each resident was provided a list of 10 procedures in which they were expected to show competence. At the end of the rotation, each resident undertook an OSATS composed of 6 stations sampled from the 10 procedures using dry models-faculty used the Arthroscopic Surgical Skill Evaluation Tool (ASSET), task-specific checklists, as well as an overall 5-point global rating scale (GRS) to score each resident. Each procedure was videotaped for blinded review. The overall reliability of the OSATS (0.9) and the inter-rater reliability (0.9) were both high. A significant difference by year in training was seen for the overall GRS, the total ASSET score, and the total checklist score, as well as for each technical procedure (P < .001). Further analysis revealed a significant difference in the total ASSET score between junior (mean 18.4, 95% confidence interval [CI] 16.8 to 19.9) and senior residents (24.2, 95% CI 22.7 to 25.6), senior residents and fellows (30.1, 95% CI 28.2 to 31.9), as well as between fellows and faculty (37, 95% CI 36.1 to 27.8) (P < .05). The results of this study show that an OSATS using dry models shows evidence of validity when used to assess performance of technical procedures after a sports medicine rotation. However, junior residents were not able to perform as well as senior residents, suggesting that overall surgical experience is as important as intensive teaching. As postgraduate medical training shifts to a competency-based model, methods of assessing performance of technical procedures become necessary. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Theoretical approaches to creation of robotic coal mines based on the synthesis of simulation technologies

NASA Astrophysics Data System (ADS)

Fryanov, V. N.; Pavlova, L. D.; Temlyantsev, M. V.

2017-09-01

Methodological approaches to theoretical substantiation of the structure and parameters of robotic coal mines are outlined. The results of mathematical and numerical modeling revealed the features of manifestation of geomechanical and gas dynamic processes in the conditions of robotic mines. Technological solutions for the design and manufacture of technical means for robotic mine are adopted using the method of economic and mathematical modeling and in accordance with the current regulatory documents. For a comparative performance evaluation of technological schemes of traditional and robotic mines, methods of cognitive modeling and matrix search for subsystem elements in the synthesis of a complex geotechnological system are applied. It is substantiated that the process of technical re-equipment of a traditional mine with a phased transition to a robotic mine will reduce unit costs by almost 1.5 times with a significant social effect due to a reduction in the number of personnel engaged in hazardous work.

Evaluation of Inter-Mountain Labs infrasound sensors : July 2007.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Darren M.

2007-10-01

Sandia National Laboratories has tested and evaluated three Inter Mountain Labs infrasound sensors. The test results included in this report were in response to static and tonal-dynamic input signals. Most test methodologies used were based on IEEE Standards 1057 for Digitizing Waveform Recorders and 1241 for Analog to Digital Converters; others were designed by Sandia specifically for infrasound application evaluation and for supplementary criteria not addressed in the IEEE standards. The objective of this work was to evaluate the overall technical performance of the Inter Mountain Labs (IML) infrasound sensor model SS. The results of this evaluation were only comparedmore » to relevant noise models; due to a lack of manufactures documentation notes on the sensors under test prior to testing. The tests selected for this system were chosen to demonstrate different performance aspects of the components under test.« less

Advanced Public Transportation Systems. Technical Assistance Brief 2

DOT National Transportation Integrated Search

1993-01-01

The Advanced Public Transportation Systems (APTS) Program requires evaluation : of pilot projects. This technical assistance brief discusses the guidelines set : for developing evaluation framework and methodology for local projects. 4p.

Consumer evaluation of complaint handling in the Dutch health insurance market

PubMed Central

2011-01-01

Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and trust in the company to the same extent. Therefore, it is important for managers to be aware of the type of consumer satisfaction they are measuring when evaluating the handling of complaints within their company. PMID:22085762

Model format for a vaccine stability report and software solutions.

PubMed

Shin, Jinho; Southern, James; Schofield, Timothy

2009-11-01

A session of the International Association for Biologicals Workshop on Stability Evaluation of Vaccine, a Life Cycle Approach was devoted to a model format for a vaccine stability report, and software solutions. Presentations highlighted the utility of a model format that will conform to regulatory requirements and the ICH common technical document. However, there need be flexibility to accommodate individual company practices. Adoption of a model format is premised upon agreement regarding content between industry and regulators, and ease of use. Software requirements will include ease of use and protections against inadvertent misspecification of stability design or misinterpretation of program output.

Creating an Environmental Justice Framework for Policy Change in Childhood Asthma: A Grassroots to Treetops Approach

PubMed Central

Sargent, Katherine; Arons, Abigail; Standish, Marion; Brindis, Claire D.

2011-01-01

Objectives. The Community Action to Fight Asthma Initiative, a network of coalitions and technical assistance providers in California, employed an environmental justice approach to reduce risk factors for asthma in school-aged children. Policy advocacy focused on housing, schools, and outdoor air quality. Technical assistance partners from environmental science, policy advocacy, asthma prevention, and media assisted in advocacy. An evaluation team assessed progress and outcomes. Methods. A theory of change and corresponding logic model were used to document coalition development and successes. Site visits, surveys, policymaker interviews, and participation in meetings documented the processes and outcomes. Quantitative and qualitative data were analyzed to assess strategies, successes, and challenges. Results. Coalitions, working with community residents and technical assistance experts, successfully advocated for policies to reduce children's exposures to environmental triggers, particularly in low-income communities and communities of color. Policies were implemented at various levels. Conclusions. Environmental justice approaches to policy advocacy could be an effective strategy to address inequities across communities. Strong technical assistance, close community involvement, and multilevel strategies were all essential to effective policies to reduce environmental inequities. PMID:21836108

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

A model to calculate consistent atmospheric emission projections and its application to Spain

NASA Astrophysics Data System (ADS)

Lumbreras, Julio; Borge, Rafael; de Andrés, Juan Manuel; Rodríguez, Encarnación

Global warming and air quality are headline environmental issues of our time and policy must preempt negative international effects with forward-looking strategies. As part of the revision of the European National Emission Ceilings Directive, atmospheric emission projections for European Union countries are being calculated. These projections are useful to drive European air quality analyses and to support wide-scale decision-making. However, when evaluating specific policies and measures at sectoral level, a more detailed approach is needed. This paper presents an original methodology to evaluate emission projections. Emission projections are calculated for each emitting activity that has emissions under three scenarios: without measures (business as usual), with measures (baseline) and with additional measures (target). The methodology developed allows the estimation of highly disaggregated multi-pollutant, consistent emissions for a whole country or region. In order to assure consistency with past emissions included in atmospheric emission inventories and coherence among the individual activities, the consistent emission projection (CEP) model incorporates harmonization and integration criteria as well as quality assurance/quality check (QA/QC) procedures. This study includes a sensitivity analysis as a first approach to uncertainty evaluation. The aim of the model presented in this contribution is to support decision-making process through the assessment of future emission scenarios taking into account the effect of different detailed technical and non-technical measures and it may also constitute the basis for air quality modelling. The system is designed to produce the information and formats related to international reporting requirements and it allows performing a comparison of national results with lower resolution models such as RAINS/GAINS. The methodology has been successfully applied and tested to evaluate Spanish emission projections up to 2020 for 26 pollutants but the methodology could be adopted for any particular region for different purposes, especially for European countries.

Evaluation of a novel, hybrid model (Mumbai EUS II) for stepwise teaching and training in EUS-guided biliary drainage and rendezvous procedures.

PubMed

Dhir, Vinay; Itoi, Takao; Pausawasdi, Nonthalee; Khashab, Mouen A; Perez-Miranda, Manuel; Sun, Siyu; Park, Do Hyun; Iwashita, Takuji; Teoh, Anthony Y B; Maydeo, Amit P; Ho, Khek Yu

2017-11-01

 EUS-guided biliary drainage (EUS-BD) and rendezvous (EUS-RV) are acceptable rescue options for patients with failed endoscopic retrograde cholangiopancreatography (ERCP). However, there are limited training opportunities at most centers owing to low case volumes. The existing models do not replicate the difficulties encountered during EUS-BD. We aimed to develop and validate a model for stepwise learning of EUS-BD and EUS-RV, which replicates the actual EUS-BD procedures.  A hybrid model was created utilizing pig esophagus and stomach, with a synthetic duodenum and biliary system. The model was objectively assessed on a grade of 1 - 4 by two experts. Twenty-eight trainees were given initial training with didactic lectures and live procedures. This was followed by hands-on training in EUS-BD and EUS-RV on the hybrid model. Trainees were assessed for objective criteria of technical difficulties.  Both the experts graded the model as very good or above for all parameters. All trainees could complete the requisite steps of EUS-BD and EUS-RV in a mean time of 11 minutes (8 - 18 minutes). Thirty-six technical difficulties were noted during the training (wrong scope position, 13; incorrect duct puncture, 12; guidewire related problems, 11). Technical difficulties peaked for EUS-RV, followed by hepaticogastrostomy (HGS) and choledochoduodenostomy (CDS) (20, 9, and 7, P  = 0.001). At 10 days follow-up, nine of 28 trainees had successfully performed three EUS-RV and seven EUS-BD procedures independently.  The Mumbai EUS II hybrid model replicates situations encountered during EUS-RV and EUS-BD. Stepwise mentoring improves the chances of success in EUS-RV and EUS-BD procedures.

Can You Increase Teacher Engagement with Evaluation Simply by Improving the Evaluation System?

ERIC Educational Resources Information Center

Moskal, Adon C. M.; Stein, Sarah J.; Golding, Clinton

2016-01-01

We know various factors can influence how teaching staff engage with student evaluation, such as institutional policies or staff beliefs. However, little research has investigated the influence of the technical processes of an evaluation system. In this article, we present a case study of the effects of changing the technical system for…

Evaluation of Aeroservoelastic Effects on Flutter

NASA Technical Reports Server (NTRS)

Nagaraja, K. S.; Felt, Larry R.; Kraft, Raymond

1998-01-01

This report presents work performed by The Boeing Company to satisfy the deliverable "Evaluation of aeroservoelastic Effects on Symmetric Flutter" for Subtask 7 of Reference 1. The objective of this report is to incorporate the improved methods for studying the effects of a closed-loop control system on the aeroservoelastic behavior of the airplane planned under NASA HSR technical Integration Task 20 work. Also, a preliminary evaluation of the existing pitch control laws on symmetric flutter of the TCA configuration was addressed."The goal is to develop an improved modeling methodology and perform design studies that account for the aero-structures-systems interaction effects.

48 CFR 1352.215-75 - Evaluation criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Evaluation Factors. Factor 1—TECHNICAL APPROACH. The proposal will be evaluated on how the offeror intends to... as an example only.] In determining which proposal provides the best value to the Government, non... integrated assessment of the technical and cost/price proposals, the Government may make an award to other...

A Technical Evaluation of the First Stage of the Mediterranean Regional Project.

ERIC Educational Resources Information Center

Hollister, Robinson

Objectives of this technical evaluation concerning the transfer of experience in the development of human resources were to develop educational plans based upon comprehensive estimates of manpower requirements and to evaluate the methods used in estimating manpower requirements for educational planning. The methodology involved estimates of the…

Evaluation of Title I ESEA Projects, 1976-77: Technical Reports. Report #77140.

ERIC Educational Resources Information Center

Philadelphia School District, PA. Office of Research and Evaluation.

This volume compiles technical reports of Title I Elementary and Secondary Education Act project evaluations conducted during the 1976-77 academic year in the school district of Philadelphia, Pennsylvania. The reports include rationale, expected outcomes, mode of operation, previous evaluative findings, current implementation, and attainment of…

A System for Evaluating Microcomputer Courseware for Vocational and Technical Education. Final Report.

ERIC Educational Resources Information Center

Chase, Shirley A.; And Others

A project was conducted to design a system for evaluating microcomputer courseware for vocational and technical education. Through a literature review and contacts with organizations and individuals involved in courseware evaluation and use, project staff identified and acquired for review documents pertaining to courseware evaulation, vocational…

Evaluation of some technical factors affecting surgical outcome in photorefractive keratectomy with the VISX 2020 excimer laser

NASA Astrophysics Data System (ADS)

Maguen, Ezra I.; Salz, James J.; Papaioannou, Thanassis; Nesburn, Anthony B.

1995-05-01

Some technical factors relating to the use of the VISX model 20/20 excimer laser for photorefractive keratectomy will be discussed and the way they affect the final optical correction will be demonstrated, as follows: (1) Discontinuation of nitrogen flow: improved corneal haze but induced a mean undercorrection of 0.8 D, 18 months postoperatively. (2) Discontinuation of the use of the fixation ring did not affect centration in a statistically significant fashion. (3) Enlargement of the optical from 5.0 mm to 6.0 mm zone did not affect the refractive outcome. Visual acuity was improved in eyes which had PRK done with a 6.0 mm optical zone.

Scale and scope economies in Mexican private medical units.

PubMed

Keith, Jorge; Prior, Diego

2014-01-01

To evaluate technical efficiency and potential presence of scale and scope economies in Mexican private medical units (PMU) that will improve management decisions. We used data envelopment analysis methods with inputs and outputs for 2 105 Mexican PMU published in 2010 by the Instituto Nacional de Estadística y Geografía from the "Estadística de Unidades Médicas Privadas con Servicio de Hospitalización (PEC-6-20-A)" questionnaire. The application of the models used in the paper found that there is a marginal presence of economies of scale and scope in Mexican PMU. PMU in Mexico must focus to deliver their services on a diversified structure to achieve technical efficiency.

The Changing Nature of Technical Assistance.

ERIC Educational Resources Information Center

Noggle, Nelson L.

The changing nature of technical assistance activities and evaluation for compensatory education programs was discussed. The emphasis is on the Education Consolidation and Improvement Act (ECIA) Chapter 1 Technical Assistance Centers (TAC) and their clients. Improvement of school practices demands that the technical assistance process be developed…

Full-Scale Test Program for a Shower Wastewater Recycling System: Technical Evaluation

DTIC Science & Technology

1987-01-01

taken, each using sn average 10.6 gal of water. Hathers were permitted to use their own choice of soap and shampoo , a condition expected to exist in a...Laboratories in Richmond, VA, using a Beckman Total Organic Carbon Analyzer, Model 915. Sulfate The Hach SulfaVer 4 Sulfate Reagent was used to measure... sulfate content by the turbidimetric metal.. Turbidity A Hach Laboratory Turbidimeter, Model 2100A, was used to measure turbidity. pH A Photovolt pH meter

Human Behaviour Representation in Constructive Modelling (Representation du comportement humain dans des modelisations creatives)

DTIC Science & Technology

2009-09-01

involved in R&T activities. RTO reports both to the Military Committee of NATO and to the Conference of National Armament Directors. It comprises a...4 11.5.3 Project Description 11-5 Chapter 12 – Technical Evaluation Report 12-1 12.1 Executive Summary 12-1 12.2 Introduction 12-2 12.3...modelling human factors has been slow over the past decade, other forums have been reporting a number of theoretical and applied papers on human behaviour

Human Behaviour Representation in Constructive Modelling (Representation du comportement humain dans des modelisations creatives)

DTIC Science & Technology

2009-09-01

ordination with other NATO bodies involved in R&T activities. RTO reports both to the Military Committee of NATO and to the Conference of National...Aims 11-4 11.5.2 Background 11-4 11.5.3 Project Description 11-5 Chapter 12 – Technical Evaluation Report 12-1 12.1 Executive Summary 12-1...track. Although progress in modelling human factors has been slow over the past decade, other forums have been reporting a number of theoretical and

Technosocial Modeling of IED Threat Scenarios and Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitney, Paul D.; Brothers, Alan J.; Coles, Garill A.

2009-03-23

This paper describes an approach for integrating sociological and technical models to develop more complete threat assessment. Current approaches to analyzing and addressing threats tend to focus on the technical factors. This paper addresses development of predictive models that encompass behavioral as well as these technical factors. Using improvised explosive device (IED) attacks as motivation, this model supports identification of intervention activities 'left of boom' as well as prioritizing attack modalities. We show how Bayes nets integrate social factors associated with IED attacks into general threat model containing technical and organizational steps from planning through obtaining the IED to initiationmore » of the attack. The social models are computationally-based representations of relevant social science literature that describes human decision making and physical factors. When combined with technical models, the resulting model provides improved knowledge integration into threat assessment for monitoring. This paper discusses the construction of IED threat scenarios, integration of diverse factors into an analytical framework for threat assessment, indicator identification for future threats, and future research directions.« less

The Use of Dynamic Stochastic Social Behavior Models to Produce Likelihood Functions for Risk Modeling of Proliferation and Terrorist Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Jonathan; Thompson, Sandra E.; Brothers, Alan J.

The ability to estimate the likelihood of future events based on current and historical data is essential to the decision making process of many government agencies. Successful predictions related to terror events and characterizing the risks will support development of options for countering these events. The predictive tasks involve both technical and social component models. The social components have presented a particularly difficult challenge. This paper outlines some technical considerations of this modeling activity. Both data and predictions associated with the technical and social models will likely be known with differing certainties or accuracies – a critical challenge is linkingmore » across these model domains while respecting this fundamental difference in certainty level. This paper will describe the technical approach being taken to develop the social model and identification of the significant interfaces between the technical and social modeling in the context of analysis of diversion of nuclear material.« less

Transient Inverse Calibration of Hanford Site-Wide Groundwater Model to Hanford Operational Impacts - 1943 to 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Charles R.; Bergeron, Marcel P.; Wurstner, Signe K.

2001-05-31

This report describes a new initiative to strengthen the technical defensibility of predictions made with the Hanford site-wide groundwater flow and transport model. The focus is on characterizing major uncertainties in the current model. PNNL will develop and implement a calibration approach and methodology that can be used to evaluate alternative conceptual models of the Hanford aquifer system. The calibration process will involve a three-dimensional transient inverse calibration of each numerical model to historical observations of hydraulic and water quality impacts to the unconfined aquifer system from Hanford operations since the mid-1940s.

Technical Evaluation Motor No. 10 (TEM-10)

NASA Technical Reports Server (NTRS)

1993-01-01

Technical Evaluation Motor No. 10 (TEM-10) was static fired on 27 Apr. 1993 at the Thiokol Corporation full-scale motor static test bay, T-24. This final test report documents the procedures, performance, and results of the static test firing of TEM-10. All observations, discussions, conclusions, and recommendations contained are final. Included is a presentation and discussion of TEM-10 performance, anomalies, and test results in concurrence with the objectives outlined in CTP-0110, Revision D, Space Shuttle Technical Evaluation Motor No. 10 (TEM-10) Static Fire Test Plan.

Applying CBR to machine tool product configuration design oriented to customer requirements

NASA Astrophysics Data System (ADS)

Wang, Pengjia; Gong, Yadong; Xie, Hualong; Liu, Yongxian; Nee, Andrew Yehching

2017-01-01

Product customization is a trend in the current market-oriented manufacturing environment. However, deduction from customer requirements to design results and evaluation of design alternatives are still heavily reliant on the designer's experience and knowledge. To solve the problem of fuzziness and uncertainty of customer requirements in product configuration, an analysis method based on the grey rough model is presented. The customer requirements can be converted into technical characteristics effectively. In addition, an optimization decision model for product planning is established to help the enterprises select the key technical characteristics under the constraints of cost and time to serve the customer to maximal satisfaction. A new case retrieval approach that combines the self-organizing map and fuzzy similarity priority ratio method is proposed in case-based design. The self-organizing map can reduce the retrieval range and increase the retrieval efficiency, and the fuzzy similarity priority ratio method can evaluate the similarity of cases comprehensively. To ensure that the final case has the best overall performance, an evaluation method of similar cases based on grey correlation analysis is proposed to evaluate similar cases to select the most suitable case. Furthermore, a computer-aided system is developed using MATLAB GUI to assist the product configuration design. The actual example and result on an ETC series machine tool product show that the proposed method is effective, rapid and accurate in the process of product configuration. The proposed methodology provides a detailed instruction for the product configuration design oriented to customer requirements.

Technical evaluation report on the fluid dynamics panel Symposium on High Angle of attack aerodynamics. [slender wings, bodies of revolution, and body-wing configurations

NASA Technical Reports Server (NTRS)

Polhamus, E. C.

1979-01-01

An overview is presented of 32 formal papers and 7 open session papers. Topics covered include: (1) studies of configurations of practical interest; (2) mathematical modelling and supporting investigations of slender wings, bodies of revolution, and body-wing configurations; (3) design methods; and (4) air intakes.

Annual Progress Report, FY 1980, 1 October 1979 - 30 September 1980,

DTIC Science & Technology

1980-10-01

coordinating an integrated pest management program, and constructing initial pilot prototypes, test models, and pro- ducing limited quantities of medical...Screening Test Based on the Ventilatory Responses of Fish . . . . . . . a & a . . . . 25 Chemistry and Molecular Biology of the Disinfection Process...Sink Unit, Surgical, Field (NSN 6545-00-935-4056), Engineering Evaluation of . . . . . . . . . . . . . . . . . . 69 Technical Feasibility Testing (TFT

The Development of a Methodology for Estimating the Cost of Air Force On-the-Job Training.

ERIC Educational Resources Information Center

Samers, Bernard N.; And Others

The Air Force uses a standardized costing methodology for resident technical training schools (TTS); no comparable methodology exists for computing the cost of on-the-job training (OJT). This study evaluates three alternative survey methodologies and a number of cost models for estimating the cost of OJT for airmen training in the Administrative…

Developing and Validating the Socio-Technical Model in Ontology Engineering

NASA Astrophysics Data System (ADS)

Silalahi, Mesnan; Indra Sensuse, Dana; Giri Sucahyo, Yudho; Fadhilah Akmaliah, Izzah; Rahayu, Puji; Cahyaningsih, Elin

2018-03-01

This paper describes results from an attempt to develop a model in ontology engineering methodology and a way to validate the model. The approach to methodology in ontology engineering is from the point view of socio-technical system theory. Qualitative research synthesis is used to build the model using meta-ethnography. In order to ensure the objectivity of the measurement, inter-rater reliability method was applied using a multi-rater Fleiss Kappa. The results show the accordance of the research output with the diamond model in the socio-technical system theory by evidence of the interdependency of the four socio-technical variables namely people, technology, structure and task.

Technical skills measurement based on a cyber-physical system for endovascular surgery simulation.

PubMed

Tercero, Carlos; Kodama, Hirokatsu; Shi, Chaoyang; Ooe, Katsutoshi; Ikeda, Seiichi; Fukuda, Toshio; Arai, Fumihito; Negoro, Makoto; Kwon, Guiryong; Najdovski, Zoran

2013-09-01

Quantification of medical skills is a challenge, particularly simulator-based training. In the case of endovascular intervention, it is desirable that a simulator accurately recreates the morphology and mechanical characteristics of the vasculature while enabling scoring. For this purpose, we propose a cyber-physical system composed of optical sensors for a catheter's body motion encoding, a magnetic tracker for motion capture of an operator's hands, and opto-mechatronic sensors for measuring the interaction of the catheter tip with the vasculature model wall. Two pilot studies were conducted for measuring technical skills, one for distinguishing novices from experts and the other for measuring unnecessary motion. The proficiency levels were measurable between expert and novice and also between individual novice users. The results enabled scoring of the user's proficiency level, using sensitivity, reaction time, time to complete a task and respect for tissue integrity as evaluation criteria. Additionally, unnecessary motion was also measurable. The development of cyber-physical simulators for other domains of medicine depend on the study of photoelastic materials for human tissue modelling, and enables quantitative evaluation of skills using surgical instruments and a realistic representation of human tissue. Copyright © 2012 John Wiley & Sons, Ltd.

Evaluating variation in human gut microbiota profiles due to DNA extraction method and inter-subject differences.

PubMed

Wagner Mackenzie, Brett; Waite, David W; Taylor, Michael W

2015-01-01

The human gut contains dense and diverse microbial communities which have profound influences on human health. Gaining meaningful insights into these communities requires provision of high quality microbial nucleic acids from human fecal samples, as well as an understanding of the sources of variation and their impacts on the experimental model. We present here a systematic analysis of commonly used microbial DNA extraction methods, and identify significant sources of variation. Five extraction methods (Human Microbiome Project protocol, MoBio PowerSoil DNA Isolation Kit, QIAamp DNA Stool Mini Kit, ZR Fecal DNA MiniPrep, phenol:chloroform-based DNA isolation) were evaluated based on the following criteria: DNA yield, quality and integrity, and microbial community structure based on Illumina amplicon sequencing of the V4 region of bacterial and archaeal 16S rRNA genes. Our results indicate that the largest portion of variation within the model was attributed to differences between subjects (biological variation), with a smaller proportion of variation associated with DNA extraction method (technical variation) and intra-subject variation. A comprehensive understanding of the potential impact of technical variation on the human gut microbiota will help limit preventable bias, enabling more accurate diversity estimates.

Technical Report Series on Global Modeling and Data Assimilation. Volume 22; A Coupled Ocean-Atmosphere Radiative Model for Global Ocean Biogeochemical Models

NASA Technical Reports Server (NTRS)

Gregg, Watson W.; Suarez, Max J. (Editor)

2002-01-01

An ocean-atmosphere radiative model (OARM) evaluates irradiance availability and quality in the water column to support phytoplankton growth and drive ocean thermodynamics. An atmospheric component incorporates spectral and directional effects of clear and cloudy skies as a function of atmospheric optical constituents, and spectral reflectance across the air-sea interface. An oceanic component evaluates the propagation of spectral and directional irradiance through the water column as a function of water, five phytoplankton groups, and chromophoric dissolved organic matter. It tracks the direct and diffuse streams from the atmospheric component, and a third stream, upwelling diffuse irradiance. The atmospheric component of OARM was compared to data sources at the ocean surface with a coefficient of determination (r2) of 0.97 and a root mean square of 12.1%.

Technical Assistance Model for Long-Term Systems Change: Three State Examples

ERIC Educational Resources Information Center

Kasprzak, Christina; Hurth, Joicey; Lucas, Anne; Marshall, Jacqueline; Terrell, Adriane; Jones, Elizabeth

2010-01-01

The National Early Childhood Technical Assistance Center (NECTAC) Technical Assistance (TA) Model for Long-Term Systems Change (LTSC) is grounded in conceptual frameworks in the literature on systems change and systems thinking. The NECTAC conceptual framework uses a logic model approach to change developed specifically for states' infant and…

OrbView-3 Technical Performance Evaluation 2005: Modulation Transfer Function

NASA Technical Reports Server (NTRS)

Cole, Aaron

2007-01-01

The Technical performance evaluation of OrbView-3 using the Modulation Transfer Function (MTF) is presented. The contents include: 1) MTF Results and Methodology; 2) Radiometric Calibration Methodology; and 3) Relative Radiometric Assessment Results

Power Hardware-in-the-Loop Evaluation of PV Inverter Grid Support on Hawaiian Electric Feeders: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Austin; Prabakar, Kumaraguru; Nagarajan, Adarsh

As more grid-connected photovoltaic (PV) inverters become compliant with evolving interconnections requirements, there is increased interest from utilities in understanding how to best deploy advanced grid-support functions (GSF) in the field. One efficient and cost-effective method to examine such deployment options is to leverage power hardware-in-the-loop (PHIL) testing methods. Two Hawaiian Electric feeder models were converted to real-time models in the OPAL-RT real-time digital testing platform, and integrated with models of GSF capable PV inverters that were modeled from characterization test data. The integrated model was subsequently used in PHIL testing to evaluate the effects of different fixed power factormore » and volt-watt control settings on voltage regulation of the selected feeders. The results of this study were provided as inputs for field deployment and technical interconnection requirements for grid-connected PV inverters on the Hawaiian Islands.« less

The core learning objectives education model: an approach to the teaching of core concepts in the clinical clerkship.

PubMed

Rapp, David E; Lyon, Mark B; Orvieto, Marcelo A; Zagaja, Gregory P

2005-10-01

The classical approach to the undergraduate medical clerkship has several limitations, including variability of clinical exposure and method of examination. As a result, the clerkship experience does not ensure exposure to and reinforcement of the fundamental concepts of a given specialty. This article reviews the classic approach to clerkship education within the undergraduate medical education. Specific attention is placed on clinical exposure and clerkship examination. We describe the introduction of the Core Learning Objective (CLO) educational model at the University of Chicago Section of Urology. This model is designed to provide an efficient exposure to and evaluation of core clerkship learning objectives. The CLO model has been successfully initiated, focusing on both technical and clinical skill sets. The proposed model has been introduced with positive initial results and should allow for an efficient approach to the teaching and evaluation of core objectives in clerkship education.

Evaluation of models and data for assessing whooping crane habitat in the central Platte River, Nebraska

USGS Publications Warehouse

Farmer, Adrian H.; Cade, Brian S.; Terrell, James W.; Henriksen, Jim H.; Runge, Jeffery T.

2005-01-01

The primary objectives of this evaluation were to improve the performance of the Whooping Crane Habitat Suitability model (C4R) used by the U.S. Fish and Wildlife Service (Service) for defining the relationship between river discharge and habitat availability, and to assist the Service in implementing improved model(s) with existing hydraulic files. The C4R habitat model is applied at the scale of individual river cross-sections, but the model outputs are scaledup to larger reaches of the river using a decision support “model” comprised of other data and procedures. Hence, the validity of the habitat model depends at least partially on how its outputs are incorporated into this larger context. For that reason, we also evaluated other procedures including the PHABSIM data files, the FORTRAN computer programs used to implement the model, and other parameters used to simulate the relationship between river flows and the availability of Whooping Crane roosting habitat along more than 100 miles of heterogeneous river channels. An equally important objective of this report was to fully document these related procedures as well as the model and evaluation results so that interested parties could readily understand the technical basis for the Service’s recommendations.

Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

PubMed

Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

2016-01-01

The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

[In silico, in vitro, in omic experimental models and drug safety evaluation].

PubMed

Claude, Nancy; Goldfain-Blanc, Françoise; Guillouzo, André

2009-01-01

Over the last few decades, toxicology has benefited from scientific, technical, and bioinformatic developments relating to patient safety assessment during clinical and drug marketing studies. Based on this knowledge, new in silico, in vitro, and "omic" experimental models are emerging. Although these models cannot currently replace classic safety evaluations performed on laboratory animals, they allow compounds with unacceptable toxicity to be rejected in the early stages of drug development, thereby reducing the number of laboratory animals needed. In addition, because these models are particularly adapted to mechanistic studies, they can help to improve the relevance of the data obtained, thus enabling better prevention and screening of the adverse effects that may occur in humans. Much progress remains to be done, especially in the field of validation. Nevertheless, current efforts by industrial, academic laboratories, and regulatory agencies should, in coming years, significantly improve preclinical drug safety evaluation thanks to the integration of these new methods into the drug research and development process.

Designer's unified cost model

NASA Technical Reports Server (NTRS)

Freeman, William T.; Ilcewicz, L. B.; Swanson, G. D.; Gutowski, T.

1992-01-01

A conceptual and preliminary designers' cost prediction model has been initiated. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state of the art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a data base and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. The approach, goals, plans, and progress is presented for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

[Mathematical model of technical equipment of a clinical-diagnostic laboratory].

PubMed

Bukin, S I; Busygin, D V; Tilevich, M E

1990-01-01

The paper is concerned with the problems of technical equipment of standard clinico-diagnostic laboratories (CDL) in this country. The authors suggest a mathematic model that may minimize expenditures for laboratory studies. The model enables the following problems to be solved: to issue scientifically-based recommendations for technical equipment of CDL; to validate the medico-technical requirements for newly devised items; to select the optimum types of uniform items; to define optimal technical decisions at the stage of the design; to determine the lab assistant's labour productivity and the cost of some investigations; to compute the medical laboratory engineering requirement for treatment and prophylactic institutions of this country.

BIOPHYSICAL EVALUATION OF INDIVIDUAL COMPONENT LEVELS AND SELECTED CONFIGURATIONS OF THE UNITED STATES MARINE CORPS COLD-WEATHER CLOTHING ENSEMBLE

DTIC Science & Technology

2018-01-02

TECHNICAL REPORT NO. T18-01 DATE January 2018 BIOPHYSICAL EVALUATION OF INDIVIDUAL COMPONENT...USARIEM TECHNICAL REPORT T18-01 BIOPHYSICAL EVALUATION OF INDIVIDUAL COMPONENT LEVELS AND...OF TABLES Table Page Table 1. Clothing and individual equipment descriptions ................................................. 3 Table 2. Surface

The Metropolitan Advanced Technical Magnet High School: 1990-1991. Formative Evaluation.

ERIC Educational Resources Information Center

Seever, Mark L.

This report evaluates the implementation of the "Long-Range Magnet School Plan" at Metropolitan Advanced Technical Magnet High School in Kansas City, Missouri for academic year 1990-91. Introductory sections describe the program, and the evaluation design and methodology. Results on enrollment indicated that only ninth and tenth grades…

Evaluation Highlights. Client Feedback from March 2009-March 2010, Compiled April 2010

ERIC Educational Resources Information Center

National Early Childhood Technical Assistance Center (NECTAC), 2010

2010-01-01

The National Early Childhood Technical Assistance Center (NECTAC) Evaluation Unit collects and analyzes data to describe the quantity and nature of the technical assistance services provided by NECTAC staff. The Unit evaluates the quality and relevance of NECTAC services and products and whether TA recipients use the information and resources…

Pregnancy and You. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Sarle, Ruth; And Others

This courseware evaluation rates the "Pregnancy and You" program, developed by Intellectual Software and sold by Career Aids, Inc. The courseware was rated by a team of home economists participating in a network designed to identify and evaluate courseware and disseminate reviews for vocational and technical teachers, media staff, and…

Initiatives in Technical and Further Education. Numbers 3 and 4.

ERIC Educational Resources Information Center

National TAFE Clearinghouse, Adelaide (Australia).

These two issues contain abstracts of 127 and 118 documents, respectively, related to the field of technical and further education that are available through the Australian Technical and Further Education (TAFE) Clearinghouse system. These types of materials are included: research reports/technical reports, evaluation studies, curriculum materials…

Development and evaluation of a patient-centred measurement tool for surgeons' non-technical skills.

PubMed

Yule, J; Hill, K; Yule, S

2018-06-01

Non-technical skills are essential for safe and effective surgery. Several tools to assess surgeons' non-technical skills from the clinician's perspective have been developed. However, a reliable measurement tool using a patient-centred approach does not currently exist. The aim of this study was to translate the existing Non-Technical Skills for Surgeons (NOTSS) tool into a patient-centred evaluation tool. Data were gathered from four cohorts of patients using an iterative four-stage mixed-methods research design. Exploratory and confirmatory factor analyses were performed to establish the psychometric properties of the tool, focusing on validity, reliability, usability and parsimony. Some 534 patients were recruited to the study. A total of 24 patient-centred non-technical skill items were developed in stage 1, and reduced to nine items in stage 2 using exploratory factor analysis. In stage 3, confirmatory factor analysis demonstrated that these nine items each loaded on to one of three factors, with excellent internal consistency: decision-making, leadership, and communication and teamwork. In stage 4, validity testing established that the new tool was independent of physician empathy and predictive of surgical quality. Surgical leadership emerged as the most dominant skill that patients could recognize and evaluate. A novel nine-item assessment tool has been developed. The Patients' Evaluation of Non-Technical Skills (PENTS) tool allows valid and reliable measurement of surgeons' non-technical skills from the patient perspective. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Drift-Scale Coupled Processes (DST and THC Seepage) Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

E. Gonnenthal; N. Spyoher

The purpose of this Analysis/Model Report (AMR) is to document the Near-Field Environment (NFE) and Unsaturated Zone (UZ) models used to evaluate the potential effects of coupled thermal-hydrologic-chemical (THC) processes on unsaturated zone flow and transport. This is in accordance with the ''Technical Work Plan (TWP) for Unsaturated Zone Flow and Transport Process Model Report'', Addendum D, Attachment D-4 (Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) 2000 [153447]) and ''Technical Work Plan for Nearfield Environment Thermal Analyses and Testing'' (CRWMS M and O 2000 [153309]). These models include the Drift Scale Test (DST) THCmore » Model and several THC seepage models. These models provide the framework to evaluate THC coupled processes at the drift scale, predict flow and transport behavior for specified thermal loading conditions, and predict the chemistry of waters and gases entering potential waste-emplacement drifts. The intended use of this AMR is to provide input for the following: (1) Performance Assessment (PA); (2) Abstraction of Drift-Scale Coupled Processes AMR (ANL-NBS-HS-000029); (3) UZ Flow and Transport Process Model Report (PMR); and (4) Near-Field Environment (NFE) PMR. The work scope for this activity is presented in the TWPs cited above, and summarized as follows: continue development of the repository drift-scale THC seepage model used in support of the TSPA in-drift geochemical model; incorporate heterogeneous fracture property realizations; study sensitivity of results to changes in input data and mineral assemblage; validate the DST model by comparison with field data; perform simulations to predict mineral dissolution and precipitation and their effects on fracture properties and chemistry of water (but not flow rates) that may seep into drifts; submit modeling results to the TDMS and document the models. The model development, input data, sensitivity and validation studies described in this AMR are required to fully document and address the requirements of the TWPs.« less

Drift-Scale Coupled Processes (DST and THC Seepage) Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

E. Sonnenthale

The purpose of this Analysis/Model Report (AMR) is to document the Near-Field Environment (NFE) and Unsaturated Zone (UZ) models used to evaluate the potential effects of coupled thermal-hydrologic-chemical (THC) processes on unsaturated zone flow and transport. This is in accordance with the ''Technical Work Plan (TWP) for Unsaturated Zone Flow and Transport Process Model Report'', Addendum D, Attachment D-4 (Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M&O) 2000 [1534471]) and ''Technical Work Plan for Nearfield Environment Thermal Analyses and Testing'' (CRWMS M&O 2000 [153309]). These models include the Drift Scale Test (DST) THC Model and several THCmore » seepage models. These models provide the framework to evaluate THC coupled processes at the drift scale, predict flow and transport behavior for specified thermal loading conditions, and predict the chemistry of waters and gases entering potential waste-emplacement drifts. The intended use of this AMR is to provide input for the following: Performance Assessment (PA); Near-Field Environment (NFE) PMR; Abstraction of Drift-Scale Coupled Processes AMR (ANL-NBS-HS-000029); and UZ Flow and Transport Process Model Report (PMR). The work scope for this activity is presented in the TWPs cited above, and summarized as follows: Continue development of the repository drift-scale THC seepage model used in support of the TSPA in-drift geochemical model; incorporate heterogeneous fracture property realizations; study sensitivity of results to changes in input data and mineral assemblage; validate the DST model by comparison with field data; perform simulations to predict mineral dissolution and precipitation and their effects on fracture properties and chemistry of water (but not flow rates) that may seep into drifts; submit modeling results to the TDMS and document the models. The model development, input data, sensitivity and validation studies described in this AMR are required to fully document and address the requirements of the TWPs.« less

Reducing measurement errors during functional capacity tests in elders.

PubMed

da Silva, Mariane Eichendorf; Orssatto, Lucas Bet da Rosa; Bezerra, Ewertton de Souza; Silva, Diego Augusto Santos; Moura, Bruno Monteiro de; Diefenthaeler, Fernando; Freitas, Cíntia de la Rocha

2018-06-01

Accuracy is essential to the validity of functional capacity measurements. To evaluate the error of measurement of functional capacity tests for elders and suggest the use of the technical error of measurement and credibility coefficient. Twenty elders (65.8 ± 4.5 years) completed six functional capacity tests that were simultaneously filmed and timed by four evaluators by means of a chronometer. A fifth evaluator timed the tests by analyzing the videos (reference data). The means of most evaluators for most tests were different from the reference (p < 0.05), except for two evaluators for two different tests. There were different technical error of measurement between tests and evaluators. The Bland-Altman test showed difference in the concordance of the results between methods. Short duration tests showed higher technical error of measurement than longer tests. In summary, tests timed by a chronometer underestimate the real results of the functional capacity. Difference between evaluators' reaction time and perception to determine the start and the end of the tests would justify the errors of measurement. Calculation of the technical error of measurement or the use of the camera can increase data validity.

Index of USA-CERL Publications.

DTIC Science & Technology

1985-07-01

Con- struction," by Paul Howdyshell, Nov 74, ADA003833. Technical Report E-63, "Comparative Evaluation of Military and Commercial Ammonia Oxidation ...Feb 81, ADA097222. Technical Report M-284, "An Evaluation of Polyvinyl Chlride (PVC) Single-Ply * Membrane Roofing Systems," by M. Rosentield, Mar 81...Field Welding of Aluminum ," by R. A. Weber, Oct 81, ADA109697. Technical Manuscript P-122, "Expected Use of Micro-Based Network Analysis," by Carl

A marketing approach to carpool demand analysis. Technical memorandum IV. Evaluation of model impact estimates. Conservation paper. [Commuter survey in 3 major urban areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-07-01

The memorandum explains and details the evaluation procedures and their application in assessing the various policies examined in connection with a research effort examining the role of individuals attitudes and perceptions in deciding whether or not to carpool. The research was based upon a survey of commuters in three major urban areas and has resulted in a sizeable new data base on respondents' socioeconomic and worktrip characteristics, travel perceptions and travel perferences.

Verification approach for the Shuttle/Payload Contamination Evaluation computer program - Spacelab induced environment

NASA Technical Reports Server (NTRS)

Bareiss, L. E.

1978-01-01

The paper presents a compilation of the results of a systems level Shuttle/payload contamination analysis and related computer modeling activities. The current technical assessment of the contamination problems anticipated during the Spacelab program are discussed and recommendations are presented on contamination abatement designs and operational procedures based on experience gained in the field of contamination analysis and assessment, dating back to the pre-Skylab era. The ultimate test of the Shuttle/Payload Contamination Evaluation program will be through comparison of predictions with measured levels of contamination during actual flight.

Integrated Resilient Aircraft Control Project Full Scale Flight Validation

NASA Technical Reports Server (NTRS)

Bosworth, John T.

2009-01-01

Objective: Provide validation of adaptive control law concepts through full scale flight evaluation. Technical Approach: a) Engage failure mode - destabilizing or frozen surface. b) Perform formation flight and air-to-air tracking tasks. Evaluate adaptive algorithm: a) Stability metrics. b) Model following metrics. Full scale flight testing provides an ability to validate different adaptive flight control approaches. Full scale flight testing adds credence to NASA's research efforts. A sustained research effort is required to remove the road blocks and provide adaptive control as a viable design solution for increased aircraft resilience.

Global assessment of shipping emissions in 2015 on a high spatial and temporal resolution

NASA Astrophysics Data System (ADS)

Johansson, Lasse; Jalkanen, Jukka-Pekka; Kukkonen, Jaakko

2017-10-01

We present a comprehensive global shipping emission inventory and the global activities of ships for the year 2015. The emissions were evaluated using the Ship Traffic Emission Assessment Model (STEAM3), which uses Automatic Identification System data to describe the traffic activities of ships. We have improved the model regarding (i) the evaluation of the missing technical specifications of ships, and (ii) the treatment of shipping activities in case of sparse satellite AIS-data. We have developed a model for the collection and processing of available information on the technical specifications, using data assimilation techniques. We have also developed a path regeneration model that constructs, whenever necessary, the detailed geometry of the ship routes. The presented results for fuel consumption were qualitatively in agreement both with those in the 3rd Greenhouse Gas Study of the International Maritime Organisation and those reported by the International Energy Agency. We have also presented high-resolution global spatial distributions of the shipping emissions of NOx, CO2, SO2 and PM2.5. The emissions were also analysed in terms of selected sea areas, ship categories, the sizes of ships and flag states. The emission datasets provided by this study are available upon request; the datasets produced by the model can be utilized as input data for air quality modelling on a global scale, including the full temporal and spatial variation of shipping emissions for the first time. Dispersion modelling using this inventory as input can be used to assess the impacts of various emission abatement scenarios. The emission computation methods presented in this paper could also be used, e.g., to provide annual updates of the global ship emissions.

Overview of Threats and Failure Models for Safety-Relevant Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This document presents a high-level overview of the threats to safety-relevant computer-based systems, including (1) a description of the introduction and activation of physical and logical faults; (2) the propagation of their effects; and (3) function-level and component-level error and failure mode models. These models can be used in the definition of fault hypotheses (i.e., assumptions) for threat-risk mitigation strategies. This document is a contribution to a guide currently under development that is intended to provide a general technical foundation for designers and evaluators of safety-relevant systems.

Thermoablation of Malignant Kidney Tumors Using Magnetic Nanoparticles: An In Vivo Feasibility Study in a Rabbit Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruners, Philipp, E-mail: bruners@hia.rwth-aachen.d; Braunschweig, Till; Hodenius, Michael

2010-02-15

The objective of this study was to assess the technical feasibility of CT-guided magnetic thermoablation for the treatment of malignant kidney tumors in a VX2 tumor rabbit model. VX2 tumors were implanted into the kidneys of five rabbits and allowed to grow for 2 weeks. After preinterventional CT perfusion imaging, CT-guided injection of superparamagnetic iron oxide particles (300 {mu}l) was performed, followed by exposure of the animals to an alternating electromagnetic field for 15 min ({approx}0.32 kA/m). Then animals underwent CT perfusion imaging again. Afterward, animals were sacrificed and kidneys were dissected for macroscopic and histological evaluation. Changes in perfusionmore » before and after exposure to the alternating magnetic field were analyzed. In one animal no tumor growth could be detected so the animal was used for optimization of the ablation procedure including injection technique and peri-interventional cross-sectional imaging (CT, MRI). After image-guided intratumoral injection of ferrofluids, the depiction of nanoparticle distribution by CT correlated well with macroscopic evaluation of the dissected kidneys. MRI was limited due to severe susceptibility artefacts. Postinterventional CT perfusion imaging revealed a perfusion deficiency around the ferrofluid deposits. Histological workup showed different zones of thermal damage adjacent to the ferrofluid deposits. In conclusion, CT-guided magnetic thermoablation of malignant kidney tumors is technically feasible in an animal model and results in a perfusion deficiency indicating tumor necrosis as depicted by CT perfusion imaging and shown in histological evaluation.« less

Learning curves for transapical transcatheter aortic valve replacement in the PARTNER-I trial: Technical performance, success, and safety.

PubMed

Suri, Rakesh M; Minha, Sa'ar; Alli, Oluseun; Waksman, Ron; Rihal, Charanjit S; Satler, Lowell P; Greason, Kevin L; Torguson, Rebecca; Pichard, Augusto D; Mack, Michael; Svensson, Lars G; Rajeswaran, Jeevanantham; Lowry, Ashley M; Ehrlinger, John; Mick, Stephanie L; Tuzcu, E Murat; Thourani, Vinod H; Makkar, Raj; Holmes, David; Leon, Martin B; Blackstone, Eugene H

2016-09-01

Introduction of hybrid techniques, such as transapical transcatheter aortic valve replacement (TA-TAVR), requires skills that a heart team must master to achieve technical efficiency: the technical performance learning curve. To date, the learning curve for TA-TAVR remains unknown. We therefore evaluated the rate at which technical performance improved, assessed change in occurrence of adverse events in relation to technical performance, and determined whether adverse events after TA-TAVR were linked to acquiring technical performance efficiency (the learning curve). From April 2007 to February 2012, 1100 patients, average age 85.0 ± 6.4 years, underwent TA-TAVR in the PARTNER-I trial. Learning curves were defined by institution-specific patient sequence number using nonlinear mixed modeling. Mean procedure time decreased from 131 to 116 minutes within 30 cases (P = .06) and device success increased to 90% by case 45 (P = .0007). Within 30 days, 354 patients experienced a major adverse event (stroke in 29, death in 96), with possibly decreased complications over time (P ∼ .08). Although longer procedure time was associated with more adverse events (P < .0001), these events were associated with change in patient risk profile, not the technical performance learning curve (P = .8). The learning curve for TA-TAVR was 30 to 45 procedures performed, and technical efficiency was achieved without compromising patient safety. Although fewer patients are now undergoing TAVR via nontransfemoral access, understanding TA-TAVR learning curves and their relationship with outcomes is important as the field moves toward next-generation devices, such as those to replace the mitral valve, delivered via the left ventricular apex. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

An animal model for instructing and the study of in situ arterial bypass.

PubMed

Saifi, J; Chang, B B; Paty, P S; Kaufman, J; Leather, R P; Shah, D M

1990-11-01

A canine model that used the cephalic vein to bypass from the brachial to the ulnar artery was designed for use in instructing and evaluating surgical technique needed for constructing an in situ arterial bypass. This model was used for instructing vascular residents in the in situ vein bypass technique. The use of this model enabled the resident to become more adept with the instruments for valve incision and construction of small vessel anastomosis. The improvement in the resident's operative technique was reflected by a decrease in the number of technical complications (missed valves, missed arteriovenous fistulas, poorly constructed anastomoses) and improved patency rate.

Does teaching non-technical skills to medical students improve those skills and simulated patient outcome?

PubMed

Hagemann, Vera; Herbstreit, Frank; Kehren, Clemens; Chittamadathil, Jilson; Wolfertz, Sandra; Dirkmann, Daniel; Kluge, Annette; Peters, Jürgen

2017-03-29

The purpose of this study is to evaluate the effects of a tailor-made, non-technical skills seminar on medical student's behaviour, attitudes, and performance during simulated patient treatment. Seventy-seven students were randomized to either a non-technical skills seminar (NTS group, n=43) or a medical seminar (control group, n=34). The human patient simulation was used as an evaluation tool. Before the seminars, all students performed the same simulated emergency scenario to provide baseline measurements. After the seminars, all students were exposed to a second scenario, and behavioural markers for evaluating their non-technical skills were rated. Furthermore, teamwork-relevant attitudes were measured before and after the scenarios, and perceived stress was measured following each simulation. All simulations were also evaluated for various medical endpoints. Non-technical skills concerning situation awareness (p<.01, r=0.5) and teamwork (p<.01, r=0.45) improved from simulation I to II in the NTS group. Decision making improved in both groups (NTS: p<.01, r=0.39; control: p<.01, r=0.46). The attitude 'handling errors' improved significantly in the NTS group (p<.05, r=0.34). Perceived stress decreased from simulation I to II in both groups. Medical endpoints and patients´ outcome did not differ significantly between the groups in simulation II. This study highlights the effectiveness of a single brief seminar on non-technical skills to improve student's non-technical skills. In a next step, to improve student's handling of emergencies and patient outcomes, non-technical skills seminars should be accompanied by exercises and more broadly embedded in the medical school curriculum.

Wind Fins: Novel Lower-Cost Wind Power System

DOE Office of Scientific and Technical Information (OSTI.GOV)

David C. Morris; Dr. Will D. Swearingen

This project evaluated the technical feasibility of converting energy from the wind with a novel “wind fin” approach. This patent-pending technology has three major components: (1) a mast, (2) a vertical, hinged wind structure or fin, and (3) a power takeoff system. The wing structure responds to the wind with an oscillating motion, generating power. The overall project goal was to determine the basic technical feasibility of the wind fin technology. Specific objectives were the following: (1) to determine the wind energy-conversion performance of the wind fin and the degree to which its performance could be enhanced through basic designmore » improvements; (2) to determine how best to design the wind fin system to survive extreme winds; (3) to determine the cost-effectiveness of the best wind fin designs compared to state-of-the-art wind turbines; and (4) to develop conclusions about the overall technical feasibility of the wind fin system. Project work involved extensive computer modeling, wind-tunnel testing with small models, and testing of bench-scale models in a wind tunnel and outdoors in the wind. This project determined that the wind fin approach is technically feasible and likely to be commercially viable. Project results suggest that this new technology has the potential to harvest wind energy at approximately half the system cost of wind turbines in the 10kW range. Overall, the project demonstrated that the wind fin technology has the potential to increase the economic viability of small wind-power generation. In addition, it has the potential to eliminate lethality to birds and bats, overcome public objections to the aesthetics of wind-power machines, and significantly expand wind-power’s contribution to the national energy supply.« less

A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part I.

ERIC Educational Resources Information Center

Behr, Shirley K.; And Others

The interim report presents an evaluation of TADS (Technical Assistance Development System) through case studies of TADS technical assistance to the staffs of two demonstration programs for preschool handicapped children and their families. Purposes of the study included obtaining indepth descriptions of the technical assistance process to…

Third-Party Evaluation 1977-1978 of the ACCTion Consortium: A Technical Assistance Project for Two-Year Institutions. Volume I.

ERIC Educational Resources Information Center

Enterprises for New Directions, Inc., Washington, DC.

In accordance with federally mandated evaluation requirements, Enterprises for New Directions (END), Inc., was requested to conduct a summative external evaluation of the 1977-78 Association of Community College Trustees (ACCTion) Consortium. The Consortium consists of 114 two-year colleges nationwide which receive technical assistance through…

Evaluation of the Radiography Program at Caldwell Community College and Technical Institute--Summer, 1982.

ERIC Educational Resources Information Center

Pipes, V. David

As part of a periodic evaluation of the occupational programs at Caldwell Community College and Technical Institute (CCC&TI), a study of the radiography program was conducted to collect information to facilitate planning, aid in program improvement, and meet accountability demands. The specific objectives of the program evaluation were to…

Evaluating the Effectiveness of the Utah Career and Technical Education Introduction Course

ERIC Educational Resources Information Center

Spielmaker, Debra Marie

2013-01-01

This quantitative study evaluated the gains and evaluation outcomes of the compulsory Career and Technical Education (CTE) Introduction course. All Utah public school seventh-grade students are required to enroll in this school-year course. The matched-pair design used preexisting data to analyze 6,078 pre-and postsurvey responses collected at the…

Evaluation of the Student Engagement Process in a Criminal Justice Program at a Technical College

ERIC Educational Resources Information Center

Totzke, Martin W.

2007-01-01

This applied dissertation was an evaluation of the student engagement practices offered to students in a criminal justice program at a Midwestern technical college. The problem was that an evaluation of the practices had not been conducted to provide data to indicate whether the current practices were effective. The researcher developed an…

Evaluating sustainable energy harvesting systems for human implantable sensors

NASA Astrophysics Data System (ADS)

AL-Oqla, Faris M.; Omar, Amjad A.; Fares, Osama

2018-03-01

Achieving most appropriate energy-harvesting technique for human implantable sensors is still challenging for the industry where keen decisions have to be performed. Moreover, the available polymeric-based composite materials are offering plentiful renewable applications that can help sustainable development as being useful for the energy-harvesting systems such as photovoltaic, piezoelectric, thermoelectric devices as well as other energy storage systems. This work presents an expert-based model capable of better evaluating and examining various available renewable energy-harvesting techniques in urban surroundings subject to various technical and economic, often conflicting, criteria. Wide evaluation criteria have been adopted in the proposed model after examining their suitability as well as ensuring the expediency and reliability of the model by worldwide experts' feedback. The model includes establishing an analytic hierarchy structure with simultaneous 12 conflicting factors to establish a systematic road map for designers to better assess such techniques for human implantable medical sensors. The energy-harvesting techniques considered were limited to Wireless, Thermoelectric, Infrared Radiator, Piezoelectric, Magnetic Induction and Electrostatic Energy Harvesters. Results have demonstrated that the best decision was in favour of wireless-harvesting technology for the medical sensors as it is preferable by most of the considered evaluation criteria in the model.

Developing Statistical Models to Assess Transplant Outcomes Using National Registries: The Process in the United States.

PubMed

Snyder, Jon J; Salkowski, Nicholas; Kim, S Joseph; Zaun, David; Xiong, Hui; Israni, Ajay K; Kasiske, Bertram L

2016-02-01

Created by the US National Organ Transplant Act in 1984, the Scientific Registry of Transplant Recipients (SRTR) is obligated to publicly report data on transplant program and organ procurement organization performance in the United States. These reports include risk-adjusted assessments of graft and patient survival, and programs performing worse or better than expected are identified. The SRTR currently maintains 43 risk adjustment models for assessing posttransplant patient and graft survival and, in collaboration with the SRTR Technical Advisory Committee, has developed and implemented a new systematic process for model evaluation and revision. Patient cohorts for the risk adjustment models are identified, and single-organ and multiorgan transplants are defined, then each risk adjustment model is developed following a prespecified set of steps. Model performance is assessed, the model is refit to a more recent cohort before each evaluation cycle, and then it is applied to the evaluation cohort. The field of solid organ transplantation is unique in the breadth of the standardized data that are collected. These data allow for quality assessment across all transplant providers in the United States. A standardized process of risk model development using data from national registries may enhance the field.

"Updates to Model Algorithms & Inputs for the Biogenic ...

EPA Pesticide Factsheets

We have developed new canopy emission algorithms and land use data for BEIS. Simulations with BEIS v3.4 and these updates in CMAQ v5.0.2 are compared these changes to the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and evaluated the simulations against observations. This has resulted in improvements in model evaluations of modeled isoprene, NOx, and O3. The National Exposure Research Laboratory (NERL) Atmospheric Modeling and Analysis Division (AMAD) conducts research in support of EPA mission to protect human health and the environment. AMAD research program is engaged in developing and evaluating predictive atmospheric models on all spatial and temporal scales for forecasting the air quality and for assessing changes in air quality and air pollutant exposures, as affected by changes in ecosystem management and regulatory decisions. AMAD is responsible for providing a sound scientific and technical basis for regulatory policies based on air quality models to improve ambient air quality. The models developed by AMAD are being used by EPA, NOAA, and the air pollution community in understanding and forecasting not only the magnitude of the air pollution problem, but also in developing emission control policies and regulations for air quality improvements.

The Relationship of Emotional Competencies to Transformational Leadership: Using a Corporate Model to Assess the Dispositions of Educational Leaders

ERIC Educational Resources Information Center

Hackett, Paul T.; Hortman, J. William

2008-01-01

The work of Goleman (1998) in the area of Emotional Intelligence offers promise for the assessment and evaluation of leader behaviors not related to a technical skill set such as those related to finance, data analysis, curriculum alignment, law or strategic planning. Researchers at a West Central Georgia University initiated a project that…

An interdisciplinary framework for participatory modeling design and evaluation—What makes models effective participatory decision tools?

NASA Astrophysics Data System (ADS)

Falconi, Stefanie M.; Palmer, Richard N.

2017-02-01

Increased requirements for public involvement in water resources management (WRM) over the past century have stimulated the development of more collaborative decision-making methods. Participatory modeling (PM) uses computer models to inform and engage stakeholders in the planning process in order to influence collaborative decisions in WRM. Past evaluations of participatory models focused on process and final outcomes, yet, were hindered by diversity of purpose and inconsistent documentation. This paper presents a two-stage framework for evaluating PM based on mechanisms for improving model effectiveness as participatory tools. The five dimensions characterize the "who, when, how, and why" of each participatory effort (stage 1). Models are evaluated as "boundary objects," a concept used to describe tools that bridge understanding and translate different bodies of knowledge to improve credibility, salience, and legitimacy (stage 2). This evaluation framework is applied to five existing case studies from the literature. Though the goals of participation can be diverse, the novel contribution of the two-stage proposed framework is the flexibility it has to evaluate a wide range of cases that differ in scope, modeling approach, and participatory context. Also, the evaluation criteria provide a structured vocabulary based on clear mechanisms that extend beyond previous process-based and outcome-based evaluations. Effective models are those that take advantage of mechanisms that facilitate dialogue and resolution and improve the accessibility and applicability of technical knowledge. Furthermore, the framework can help build more complete records and systematic documentation of evidence to help standardize the field of PM.

A New Socio-technical Model for Studying Health Information Technology in Complex Adaptive Healthcare Systems

PubMed Central

Sittig, Dean F.; Singh, Hardeep

2011-01-01

Conceptual models have been developed to address challenges inherent in studying health information technology (HIT). This manuscript introduces an 8-dimensional model specifically designed to address the socio-technical challenges involved in design, development, implementation, use, and evaluation of HIT within complex adaptive healthcare systems. The 8 dimensions are not independent, sequential, or hierarchical, but rather are interdependent and interrelated concepts similar to compositions of other complex adaptive systems. Hardware and software computing infrastructure refers to equipment and software used to power, support, and operate clinical applications and devices. Clinical content refers to textual or numeric data and images that constitute the “language” of clinical applications. The human computer interface includes all aspects of the computer that users can see, touch, or hear as they interact with it. People refers to everyone who interacts in some way with the system, from developer to end-user, including potential patient-users. Workflow and communication are the processes or steps involved in assuring that patient care tasks are carried out effectively. Two additional dimensions of the model are internal organizational features (e.g., policies, procedures, and culture) and external rules and regulations, both of which may facilitate or constrain many aspects of the preceding dimensions. The final dimension is measurement and monitoring, which refers to the process of measuring and evaluating both intended and unintended consequences of HIT implementation and use. We illustrate how our model has been successfully applied in real-world complex adaptive settings to understand and improve HIT applications at various stages of development and implementation. PMID:20959322

48 CFR 1352.215-70 - Proposal preparation.

Code of Federal Regulations, 2012 CFR

2012-10-01

...; justifications for noncompetitive proposed subcontracts; identification of technical data to be withheld; and any... evaluation factor.] Evaluation Factor 1—Technical Approach. Provide information on how the project is to be organized, staffed, and managed that demonstrates the offeror's understanding and effective management of...

Integrated corridor management initiative : demonstration phase evaluation – Dallas technical capability analysis test plan.

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Technical Capability Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the Dallas U.S. 75 Integrated Corridor Management (ICM) Initiative Demonstration. The ICM ...

High fidelity simulation based team training in urology: a preliminary interdisciplinary study of technical and nontechnical skills in laparoscopic complications management.

PubMed

Lee, Jason Y; Mucksavage, Phillip; Canales, Cecilia; McDougall, Elspeth M; Lin, Sharon

2012-04-01

Simulation based team training provides an opportunity to develop interdisciplinary communication skills and address potential medical errors in a high fidelity, low stakes environment. We evaluated the implementation of a novel simulation based team training scenario and assessed the technical and nontechnical performance of urology and anesthesiology residents. Urology residents were randomly paired with anesthesiology residents to participate in a simulation based team training scenario involving the management of 2 scripted critical events during laparoscopic radical nephrectomy, including the vasovagal response to pneumoperitoneum and renal vein injury during hilar dissection. A novel kidney surgical model and a high fidelity mannequin simulator were used for the simulation. A debriefing session followed each simulation based team training scenario. Assessments of technical and nontechnical performance were made using task specific checklists and global rating scales. A total of 16 residents participated, of whom 94% rated the simulation based team training scenario as useful for communication skill training. Also, 88% of urology residents believed that the kidney surgical model was useful for technical skill training. Urology resident training level correlated with technical performance (p=0.004) and blood loss during renal vein injury management (p=0.022) but not with nontechnical performance. Anesthesia resident training level correlated with nontechnical performance (p=0.036). Urology residents consistently rated themselves higher on nontechnical performance than did faculty (p=0.033). Anesthesia residents did not differ in the self-assessment of nontechnical performance compared to faculty assessments. Residents rated the simulation based team training scenario as useful for interdisciplinary communication skill training. Urology resident training level correlated with technical performance but not with nontechnical performance. Urology residents consistently overestimated their nontechnical performance. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

PubMed

Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach

PubMed Central

Qin, Yaochen; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention. PMID:28950027

Building groundwater modeling capacity in Mongolia

USGS Publications Warehouse

Valder, Joshua F.; Carter, Janet M.; Anderson, Mark T.; Davis, Kyle W.; Haynes, Michelle A.; Dorjsuren Dechinlhundev,

2016-06-16

Ulaanbaatar, the capital city of Mongolia (fig. 1), is dependent on groundwater for its municipal and industrial water supply. The population of Mongolia is about 3 million people, with about one-half the population residing in or near Ulaanbaatar (World Population Review, 2016). Groundwater is drawn from a network of shallow wells in an alluvial aquifer along the Tuul River. Evidence indicates that current water use may not be sustainable from existing water sources, especially when factoring the projected water demand from a rapidly growing urban population (Ministry of Environment and Green Development, 2013). In response, the Government of Mongolia Ministry of Environment, Green Development, and Tourism (MEGDT) and the Freshwater Institute, Mongolia, requested technical assistance on groundwater modeling through the U.S. Army Corps of Engineers (USACE) to the U.S. Geological Survey (USGS). Scientists from the USGS and USACE provided two workshops in 2015 to Mongolian hydrology experts on basic principles of groundwater modeling using the USGS groundwater modeling program MODFLOW-2005 (Harbaugh, 2005). The purpose of the workshops was to bring together representatives from the Government of Mongolia, local universities, technical experts, and other key stakeholders to build in-country capacity in hydrogeology and groundwater modeling.A preliminary steady-state groundwater-flow model was developed as part of the workshops to demonstrate groundwater modeling techniques to simulate groundwater conditions in alluvial deposits along the Tuul River in the vicinity of Ulaanbaatar. ModelMuse (Winston, 2009) was used as the graphical user interface for MODFLOW for training purposes during the workshops. Basic and advanced groundwater modeling concepts included in the workshops were groundwater principles; estimating hydraulic properties; developing model grids, data sets, and MODFLOW input files; and viewing and evaluating MODFLOW output files. A key to success was developing in-country technical capacity and partnerships with the Mongolian University of Science and Technology; Freshwater Institute, Mongolia, a non-profit organization; United Nations Educational, Scientific and Cultural Organization (UNESCO); the Government of Mongolia; and the USACE.

SRTC criticality safety technical review: Nuclear Criticality Safety Evaluation 93-04 enriched uranium receipt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rathbun, R.

Review of NMP-NCS-930087, {open_quotes}Nuclear Criticality Safety Evaluation 93-04 Enriched Uranium Receipt (U), July 30, 1993, {close_quotes} was requested of SRTC (Savannah River Technology Center) Applied Physics Group. The NCSE is a criticality assessment to determine the mass limit for Engineered Low Level Trench (ELLT) waste uranium burial. The intent is to bury uranium in pits that would be separated by a specified amount of undisturbed soil. The scope of the technical review, documented in this report, consisted of (1) an independent check of the methods and models employed, (2) independent HRXN/KENO-V.a calculations of alternate configurations, (3) application of ANSI/ANS 8.1,more » and (4) verification of WSRC Nuclear Criticality Safety Manual procedures. The NCSE under review concludes that a 500 gram limit per burial position is acceptable to ensure the burial site remains in a critically safe configuration for all normal and single credible abnormal conditions. This reviewer agrees with that conclusion.« less

Technical and Energy Performance of an Advanced, Aqueous Ammonia-Based CO2 Capture Technology for a 500 MW Coal-Fired Power Station.

PubMed

Li, Kangkang; Yu, Hai; Feron, Paul; Tade, Moses; Wardhaugh, Leigh

2015-08-18

Using a rate-based model, we assessed the technical feasibility and energy performance of an advanced aqueous-ammonia-based postcombustion capture process integrated with a coal-fired power station. The capture process consists of three identical process trains in parallel, each containing a CO2 capture unit, an NH3 recycling unit, a water separation unit, and a CO2 compressor. A sensitivity study of important parameters, such as NH3 concentration, lean CO2 loading, and stripper pressure, was performed to minimize the energy consumption involved in the CO2 capture process. Process modifications of the rich-split process and the interheating process were investigated to further reduce the solvent regeneration energy. The integrated capture system was then evaluated in terms of the mass balance and the energy consumption of each unit. The results show that our advanced ammonia process is technically feasible and energy-competitive, with a low net power-plant efficiency penalty of 7.7%.

A citrus waste-based biorefinery as a source of renewable energy: technical advances and analysis of engineering challenges.

PubMed

Rivas-Cantu, Raul C; Jones, Kim D; Mills, Patrick L

2013-04-01

An assessment of recent technical advances on pretreatment processes and its effects on enzymatic hydrolysis as the main steps of a proposed citrus processing waste (CPW) biorefinery is presented. Engineering challenges and relevant gaps in scientific and technical information for reliable design, modeling and scale up of a CPW biorefinery are also discussed. Some integrated physico-chemical pretreatments are proposed for testing for CPW, including high speed knife-grinding and simultaneous caustic addition. These new proposed processes and the effect of parameters such as particle size, surface area and morphology, pore volume and chemical composition of the diverse fractions resulting from pretreatment and enzymatic hydrolysis need to be evaluated and compared for pretreated and untreated samples of grapefruit processing waste. This assessment suggests the potential for filling the data gaps, and preliminary results demonstrate that the reduction of particle size and the increased surface area for the CPW will result in higher reaction rates and monosaccharide yields for the pretreated waste material.

Evaluation of world's largest social welfare scheme: An assessment using non-parametric approach.

PubMed

Singh, Sanjeet

2016-08-01

Mahatma Gandhi National Rural Employment Guarantee Act (MGNREGA) is the world's largest social welfare scheme in India for the poverty alleviation through rural employment generation. This paper aims to evaluate and rank the performance of the states in India under MGNREGA scheme. A non-parametric approach, Data Envelopment Analysis (DEA) is used to calculate the overall technical, pure technical, and scale efficiencies of states in India. The sample data is drawn from the annual official reports published by the Ministry of Rural Development, Government of India. Based on three selected input parameters (expenditure indicators) and five output parameters (employment generation indicators), I apply both input and output oriented DEA models to estimate how well the states utilize their resources and generate outputs during the financial year 2013-14. The relative performance evaluation has been made under the assumption of constant returns and also under variable returns to scale to assess the impact of scale on performance. The results indicate that the main source of inefficiency is both technical and managerial practices adopted. 11 states are overall technically efficient and operate at the optimum scale whereas 18 states are pure technical or managerially efficient. It has been found that for some states it necessary to alter scheme size to perform at par with the best performing states. For inefficient states optimal input and output targets along with the resource savings and output gains are calculated. Analysis shows that if all inefficient states operate at optimal input and output levels, on an average 17.89% of total expenditure and a total amount of $780million could have been saved in a single year. Most of the inefficient states perform poorly when it comes to the participation of women and disadvantaged sections (SC&ST) in the scheme. In order to catch up with the performance of best performing states, inefficient states on an average need to enhance women participation by 133%. In addition, the states are also ranked using the cross efficiency approach and results are analyzed. State of Tamil Nadu occupies the top position followed by Puducherry, Punjab, and Rajasthan in the ranking list. To the best of my knowledge, this is the first pan-India level study to evaluate and rank the performance of MGNREGA scheme quantitatively and so comprehensively. Copyright © 2016 Elsevier Ltd. All rights reserved.

Small physician practices in new york needed sustained help to realize gains in quality from use of electronic health records.

PubMed

Ryan, Andrew M; Bishop, Tara F; Shih, Sarah; Casalino, Lawrence P

2013-01-01

The 2009 American Recovery and Reinvestment Act spurred adoption of electronic health records (EHRs) in the United States, through such measures as financial incentives to providers through Medicare and Medicaid and regional extension centers, which provide ongoing technical assistance to practices. Yet the relationship between EHR adoption and quality of care remains poorly understood. We evaluated the early effects on quality of the Primary Care Information Project, which provides subsidized EHRs and technical assistance to primary care practices in underserved neighborhoods in New York City, using the regional extension center model. We found that just general participation in, or exposure to, the project was not enough to improve quality of care. It took sustained exposure on the part of these practices and technical assistance to them before they demonstrated improvement on measures of care most likely to be affected by the use of electronic health records, such as cancer screenings and care for patients with diabetes. Participating in the Primary Care Information Project for nine or more months was associated with significantly improved quality, but only for this limited group of quality measures and only for physicians receiving extensive technical assistance.

Assessing Technical Competence in Surgical Trainees: A Systematic Review.

PubMed

Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

2015-06-01

To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.

Technical change in forest sector models: the global forest products model approach

Treesearch

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

Quantitation of fixative-induced morphologic and antigenic variation in mouse and human breast cancers

PubMed Central

Cardiff, Robert D; Hubbard, Neil E; Engelberg, Jesse A; Munn, Robert J; Miller, Claramae H; Walls, Judith E; Chen, Jane Q; Velásquez-García, Héctor A; Galvez, Jose J; Bell, Katie J; Beckett, Laurel A; Li, Yue-Ju; Borowsky, Alexander D

2013-01-01

Quantitative Image Analysis (QIA) of digitized whole slide images for morphometric parameters and immunohistochemistry of breast cancer antigens was used to evaluate the technical reproducibility, biological variability, and intratumoral heterogeneity in three transplantable mouse mammary tumor models of human breast cancer. The relative preservation of structure and immunogenicity of the three mouse models and three human breast cancers was also compared when fixed with representatives of four distinct classes of fixatives. The three mouse mammary tumor cell models were an ER + /PR + model (SSM2), a Her2 + model (NDL), and a triple negative model (MET1). The four breast cancer antigens were ER, PR, Her2, and Ki67. The fixatives included examples of (1) strong cross-linkers, (2) weak cross-linkers, (3) coagulants, and (4) combination fixatives. Each parameter was quantitatively analyzed using modified Aperio Technologies ImageScope algorithms. Careful pre-analytical adjustments to the algorithms were required to provide accurate results. The QIA permitted rigorous statistical analysis of results and grading by rank order. The analyses suggested excellent technical reproducibility and confirmed biological heterogeneity within each tumor. The strong cross-linker fixatives, such as formalin, consistently ranked higher than weak cross-linker, coagulant and combination fixatives in both the morphometric and immunohistochemical parameters. PMID:23399853

75 FR 68606 - Chetco River Gravel Mining Executive and Technical Teams; Notification of Availability of Documents.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Executive and Technical Teams; Notification of Availability of Documents. AGENCY: U.S. Army Corps of... public all work products of the Chetco River Gravel Mining Executive and Technical Teams. These work... INFORMATION: The Executive and Technical Teams were established in 2007 as part of an initiative to evaluate...

ProVac Global Initiative: a vision shaped by ten years of supporting evidence-based policy decisions.

PubMed

Jauregui, Barbara; Janusz, Cara Bess; Clark, Andrew D; Sinha, Anushua; Garcia, Ana Gabriela Felix; Resch, Stephen; Toscano, Cristiana M; Sanderson, Colin; Andrus, Jon Kim

2015-05-07

The Pan American Health Organization (PAHO) created the ProVac Initiative in 2004 with the goal of strengthening national technical capacity to make evidence-based decisions on new vaccine introduction, focusing on economic evaluations. In view of the 10th anniversary of the ProVac Initiative, this article describes its progress and reflects on lessons learned to guide the next phase. We quantified the output of the Initiative's capacity-building efforts and critically assess its progress toward achieving the milestones originally proposed in 2004. Additionally, we reviewed how country studies supported by ProVac have directly informed and strengthened the deliberations around new vaccine introduction. Since 2004, ProVac has conducted four regional workshops and supported 24 health economic analyses in 15 Latin American and Caribbean countries. Five Regional Centers of Excellence were funded, resulting in six operational research projects and nine publications. Twenty four decisions on new vaccine introductions were supported with ProVac studies. Enduring products include the TRIVAC and CERVIVAC cost-effectiveness models, the COSTVAC program costing model, methodological guides, workshop training materials and the OLIVES on-line data repository. Ten NITAGs were strengthened through ProVac activities. The evidence accumulated suggests that initiatives with emphasis on sustainable training and direct support for countries to generate evidence themselves, can help accelerate the introduction of the most valuable new vaccines. International and Regional Networks of Collaborators are necessary to provide technical support and tools to national teams conducting analyses. Timeliness, integration, quality and country ownership of the process are four necessary guiding principles for national economic evaluations to have an impact on policymaking. It would be an asset to have a model that offers different levels of complexity to choose from depending on the vaccine being evaluated, the availability of data, and the time frame of the decision. Decision support for new vaccine introduction in low- and middle-income countries is critical to maximizing the efficiency and impact of vaccination programs. Global technical cooperation will be required. In the future, PAHO and WHO have an opportunity to expand the reach of the ProVac philosophy, models, and methods to additional regions and countries requiring real-time support. The ProVac Global Initiative is proposed as an effective mechanism to do so. Copyright © 2015. Published by Elsevier Ltd.

[A historical and conceptual model for Primary Health Care: challenges for the organization of primary care and the Family Health Strategy in large Brazilian cities].

PubMed

Conill, Eleonor Minho

2008-01-01

This paper focuses on the experience with Primary Health Care as a strategy for reorganizing the health care model, based on reforms in this direction and their implementation in the Brazilian case. The article identifies a shift in the discourse concerning health sector reforms, with a return to emphasis on primary care and integration of services. The Brazilian context demands reflection on the possibilities for synergy between this strategy and other social policies and the factors needed to ensure adequate performance. Evaluation research has suggested that primary care activities are slightly superior as compared to traditional health care units, despite persistent difficulties in access, physical infrastructure, team formation, management, and organization of the network. These difficulties correlate with a low level of public financing, persistent segmentation of the system, and weak integration of primary care services with other levels of care. From the technical perspective, a reasonable target is to guarantee the strategy's continuity with the necessary adjustments, conditioned by the dynamics of the health care technical models involved in the dispute.

Progress Report on Reactivity Analyses (October-December Test Data). Beginning Teacher Evaluation Study. Technical Note Series. Technical Note III-5.

ERIC Educational Resources Information Center

Filby, Nikola N.

The development and refinement of the measures of student achievement in reading and mathematics for the Beginning Teacher Evaluation Study are described. The concept of reactivity to instruction is introduced: the tests used to evaluate instructional processes must be sensitive indicators of classroom learning overtime. Data collection activities…

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico.

PubMed

Quintana, Sandra

2015-11-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance.

Can We Predict Technical Aptitude?: A Systematic Review.

PubMed

Louridas, Marisa; Szasz, Peter; de Montbrun, Sandra; Harris, Kenneth A; Grantcharov, Teodor P

2016-04-01

To identify background characteristics and cognitive tests that may predict surgical trainees' future technical performance, and therefore be used to supplement existing surgical residency selection criteria. Assessment of technical skills is not commonly incorporated as part of the selection process for surgical trainees in North America. Emerging evidence, however, suggests that not all trainees are capable of reaching technical competence. Therefore, incorporating technical aptitude into selection processes may prove useful. A systematic search was carried out of the MEDLINE, PsycINFO, and Embase online databases to identify all studies that assessed associations between surrogate markers of innate technical abilities in surgical trainees, and whether these abilities correlate with technical performance. The quality of each study was evaluated using the Grading of Recommendations, Assessment, Development, and Evaluation system. A total of 8035 records were identified. After screening by title, abstract, and full text, 52 studies were included. Very few surrogate markers were found to predict technical performance. Significant associations with technical performance were seen for 1 of 23 participant-reported surrogate markers, 2 of 25 visual spatial tests, and 2 of 19 dexterity tests. The assessment of trainee Basic Performance Resources predicted technical performance in 62% and 75% of participants. To date, no single test has been shown to reliably predict the technical performance of surgical trainees. Strategies that rely on assessing multiple innate abilities, their interaction, and their relationship with technical skill may ultimately be more likely to serve as reliable predictors of future surgical performance.

Privacy-Preserving Evaluation of Generalization Error and Its Application to Model and Attribute Selection

NASA Astrophysics Data System (ADS)

Sakuma, Jun; Wright, Rebecca N.

Privacy-preserving classification is the task of learning or training a classifier on the union of privately distributed datasets without sharing the datasets. The emphasis of existing studies in privacy-preserving classification has primarily been put on the design of privacy-preserving versions of particular data mining algorithms, However, in classification problems, preprocessing and postprocessing— such as model selection or attribute selection—play a prominent role in achieving higher classification accuracy. In this paper, we show generalization error of classifiers in privacy-preserving classification can be securely evaluated without sharing prediction results. Our main technical contribution is a new generalized Hamming distance protocol that is universally applicable to preprocessing and postprocessing of various privacy-preserving classification problems, such as model selection in support vector machine and attribute selection in naive Bayes classification.

NCAR CSM ocean model by the NCAR oceanography section. Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical note documents the ocean component of the NCAR Climate System Model (CSM). The ocean code has been developed from the Modular Ocean Model (version 1.1) which was developed and maintained at the NOAA Geophysical Fluid Dynamics Laboratory in Princeton. As a tribute to Mike Cox, and because the material is still relevant, the first four sections of this technical note are a straight reproduction from the GFDL Technical Report that Mike wrote in 1984. The remaining sections document how the NCAR Oceanography Section members have developed the MOM 1.1 code, and how it is forced, in order tomore » produce the NCAR CSM Ocean Model.« less

Technical Evaluation Motor No. 7 (TEM-7)

NASA Technical Reports Server (NTRS)

Hughes, Phil

1991-01-01

The Technical Evaluation Motor No. 7 (TEM-7) test was a full-scale, full duration static test firing of a high performance motor-configuration solid rocket motor with nozzle vectoring. The final test report documents the procedures, performance, and results of the static test firing of TEM-7. All observations, discussions, conclusions, and recommendations included in the report are complete and final except for the TEM-7 fixed housing unbond investigation. A presentation and discussion of TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107, Rev A, Space Shuttle Technical Evaluation Motor No. 7 (TEM-7) Static Fire Test Plan are included.

75 FR 21349 - Solicitation for a Cooperative Agreement-Evaluation of Technical Assistance for Evidence-Based...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... DEPARTMENT OF JUSTICE National Institute of Corrections Solicitation for a Cooperative Agreement--Evaluation of Technical Assistance for Evidence-Based Decisionmaking in Local Criminal Justice Systems AGENCY: National Institute of Corrections, U.S. Department of Justice. ACTION: Solicitation for a Cooperative...

EPA OFFICE OF RESEARCH AND DEVELOPMENT GUIDELINES FOR TECHNICAL EVALUATION OF ECOLOGICAL INDICATORS

EPA Science Inventory

EPA's Office of Research and Development (ORD) has prepared fifteen technical guidelines to evaluate the suitability of an ecological indicator in a monitoring program. The guidelines were fashioned to provide a consistent framework for indicator review and to provide direction f...

FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

Control and Diagnostic Model of Brushless Dc Motor

NASA Astrophysics Data System (ADS)

Abramov, Ivan V.; Nikitin, Yury R.; Abramov, Andrei I.; Sosnovich, Ella V.; Božek, Pavol

2014-09-01

A simulation model of brushless DC motor (BLDC) control and diagnostics is considered. The model has been developed using a freeware complex "Modeling in technical devices". Faults and diagnostic parameters of BLDC are analyzed. A logicallinguistic diagnostic model of BLDC has been developed on basis of fuzzy logic. The calculated rules determine dependence of technical condition on diagnostic parameters, their trends and utilized lifetime of BLDC. Experimental results of BLDC technical condition diagnostics are discussed. It is shown that in the course of BLDC degradation the motor condition change depends on diagnostic parameter values

Diversity modelling for electrical power system simulation

NASA Astrophysics Data System (ADS)

Sharip, R. M.; Abu Zarim, M. A. U. A.

2013-12-01

This paper considers diversity of generation and demand profiles against the different future energy scenarios and evaluates these on a technical basis. Compared to previous studies, this research applied a forecasting concept based on possible growth rates from publically electrical distribution scenarios concerning the UK. These scenarios were created by different bodies considering aspects such as environment, policy, regulation, economic and technical. In line with these scenarios, forecasting is on a long term timescale (up to every ten years from 2020 until 2050) in order to create a possible output of generation mix and demand profiles to be used as an appropriate boundary condition for the network simulation. The network considered is a segment of rural LV populated with a mixture of different housing types. The profiles for the 'future' energy and demand have been successfully modelled by applying a forecasting method. The network results under these profiles shows for the cases studied that even though the value of the power produced from each Micro-generation is often in line with the demand requirements of an individual dwelling there will be no problems arising from high penetration of Micro-generation and demand side management for each dwellings considered. The results obtained highlight the technical issues/changes for energy delivery and management to rural customers under the future energy scenarios.

Assessing the efficiency of hospital pharmacy services in Thai public district hospitals.

PubMed

Rattanachotphanit, Thananan; Limwattananon, Chulaporn; Limwattananon, Supon; Johns, Jeff R; Schommer, Jon C; Brown, Lawrence M

2008-07-01

The purpose of this study was to assess the efficiency of hospital pharmacy services and to determine the environmental factors affecting pharmacy service efficiency. The technical efficiency of a hospital pharmacy was assessed to evaluate the hospital's ability to use pharmacy manpower in order to produce the maximum output of the pharmacy service. Data Envelopment Analysis (DEA) was used as an efficiency measurement. The two labor inputs were pharmacists and support personnel and the ten outputs were from four pharmacy activities: drug dispensing, drug purchasing and inventory control, patient-oriented activities, and health consumer protection services. This was used to estimate technical efficiency. A Tobit regression model was used to determine the effect of the hospital size, location, input mix of pharmacy staff, working experience of pharmacists at the study hospitals, and use of technology on the pharmacy service efficiency. Data for pharmacy service input and output quantities were obtained from 155 respondents. Nineteen percent were found to have full efficiency with a technical efficiency score of 1.00. Thirty-six percent had a technical efficiency score of 0.80 or above and 27% had a low technical efficiency score (< 0.60). The average TE score increased in respect to the hospital size (0.60, 0.71, 0.75, and 0.83 in 10, 30, 60, and 90-120 bed hospitals, respectively). Hospital size and geographic location were significantly associated with pharmacy service efficiency.

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., i.e., competitive vs. noncompetitive, and the cost evaluation. (c) “Written Technical and Management... * copies. (1) The written Technical and Management Proposal or Oral Presentation and Supporting... objectives of this procurement. (3) The written Technical Proposal or Oral Presentation and Supporting...

Application of Wavelet Filters in an Evaluation of ...

EPA Pesticide Factsheets

Air quality model evaluation can be enhanced with time-scale specific comparisons of outputs and observations. For example, high-frequency (hours to one day) time scale information in observed ozone is not well captured by deterministic models and its incorporation into model performance metrics lead one to devote resources to stochastic variations in model outputs. In this analysis, observations are compared with model outputs at seasonal, weekly, diurnal and intra-day time scales. Filters provide frequency specific information that can be used to compare the strength (amplitude) and timing (phase) of observations and model estimates. The National Exposure Research Laboratory′s (NERL′s) Atmospheric Modeling and Analysis Division (AMAD) conducts research in support of EPA′s mission to protect human health and the environment. AMAD′s research program is engaged in developing and evaluating predictive atmospheric models on all spatial and temporal scales for forecasting the Nation′s air quality and for assessing changes in air quality and air pollutant exposures, as affected by changes in ecosystem management and regulatory decisions. AMAD is responsible for providing a sound scientific and technical basis for regulatory policies based on air quality models to improve ambient air quality. The models developed by AMAD are being used by EPA, NOAA, and the air pollution community in understanding and forecasting not only the magnitude of the air pollu

76 FR 24065 - Board Workshop: June 6-7, 2011-Arlington, Virginia; the U.S. Nuclear Waste Technical Review Board...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Workshop: June 6-7, 2011--Arlington, Virginia; the U.S. Nuclear Waste Technical Review Board Will Hold a Workshop on Methods for Evaluating Nuclear Waste Streams... 1987, the U.S. Nuclear Waste Technical Review Board will hold a workshop on Monday, June 6, and Tuesday...

Novel Method for Analyzing Locomotor Ability after Spinal Cord Injury in Rats: Technical Note

PubMed Central

Shinozaki, Munehisa; Yasuda, Akimasa; Nori, Satoshi; Saito, Nobuhito; Toyama, Yoshiaki; Okano, Hideyuki; Nakamura, Masaya

2013-01-01

In the research for the treatment of spinal cord injury (SCI), the evaluation of motor function in model rats must be as objective, noninvasive, and ethical as possible. The maximum speed and acceleration of a mouse measured using a SCANET system were previously reported to vary significantly according to severity of SCI. In the present study, the motor performance of SCI model rats was examined with SCANET and assessed for Basso-Beattie-Bresnahan (BBB) score to determine the usefulness of the SCANET system in evaluating functional recovery after SCI. Maximum speed and acceleration within the measurement period correlated significantly with BBB scores. Furthermore, among several phased kinematic factors used in BBB scores, the capability of “plantar stepping” was associated with a drastic increase in maximum speed and acceleration after SCI. Therefore, evaluation of maximum speed and acceleration using a SCANET system is a useful method for rat models of SCI and can complement open field scoring scales. PMID:24097095

PEER NGA-East Overview: Development of a Ground Motion Characterization Model (Ground Motion Prediction Equations) for Central and Eastern North America

NASA Astrophysics Data System (ADS)

Goulet, C. A.; Abrahamson, N. A.; Al Atik, L.; Atkinson, G. M.; Bozorgnia, Y.; Graves, R. W.; Kuehn, N. M.; Youngs, R. R.

2017-12-01

The Next Generation Attenuation project for Central and Eastern North America (CENA), NGA-East, is a major multi-disciplinary project coordinated by the Pacific Earthquake Engineering Research Center (PEER). The project was co-sponsored by the U.S. Nuclear Regulatory Commission (NRC), the U.S. Department of Energy (DOE), the Electric Power Research Institute (EPRI) and the U.S. Geological Survey (USGS). NGA-East involved a large number of participating researchers from various organizations in academia, industry and government and was carried-out as a combination of 1) a scientific research project and 2) a model-building component following the NRC Seismic Senior Hazard Analysis Committee (SSHAC) Level 3 process. The science part of the project led to several data products and technical reports while the SSHAC component aggregated the various results into a ground motion characterization (GMC) model. The GMC model consists in a set of ground motion models (GMMs) for median and standard deviation of ground motions and their associated weights, combined into logic-trees for use in probabilistic seismic hazard analyses (PSHA). NGA-East addressed many technical challenges, most of them related to the relatively small number of earthquake recordings available for CENA. To resolve this shortcoming, the project relied on ground motion simulations to supplement the available data. Other important scientific issues were addressed through research projects on topics such as the regionalization of seismic source, path and attenuation of motions, the treatment of variability and uncertainties and on the evaluation of site effects. Seven working groups were formed to cover the complexity and breadth of topics in the NGA-East project, each focused on a specific technical area. This presentation provides an overview of the NGA-East research project and its key products.

The Intertwining of Enterprise Strategy and Requirements

NASA Astrophysics Data System (ADS)

Loucopoulos, Pericles; Garfield, Joy

Requirements Engineering techniques need to focus not only on the target technical system, as has traditionally been the case, but also on the interplay between business and system functionality. Whether a business wishes to exploit advances in technology to achieve new strategic objectives or to organise work in innovative ways, the process of Requirements Engineering could and should present opportunities for modelling and evaluating the potential impact that technology can bring about to the enterprise.This chapter discusses a co-designing process that offers opportunities of change to both the business and its underlying technical systems, in a synergistic manner. In these design situations some of the most challenging projects involve multiple stakeholders from different participating organisations, subcontractors, divisions etc who may have a diversity of expertise, come from different organisational cultures and often have competing goals. Stakeholders are faced with many different alternative future ‘worlds’ each one demanding a possibly different development strategy.There are acute questions about the potential structure of the new business system and how key variables in this structure could impact on the dynamics of the system. This chapter presents a framework which enables the evaluation of requirements through (a) system dynamics modelling, (b) ontology modelling, (c) scenario modelling and (d) rationale modelling. System dynamics modelling is used to define the behaviour of an enterprise system in terms of four perspectives. Ontology modelling is used to formally define invariant components of the physical and social world within the enterprise domain. Scenario modelling is used to identify critical variables and by quantitatively analyzing the effects of these variables through simulation to better understand the dynamic behaviour of the possible future structures. Rationale modelling is used to assist collaborative discussions when considering either ontology models or scenarios for change, developing maps, which chart the assumptions and reasoning behind key decisions during the requirements process.

External Peer Review Team Report Underground Testing Area Subproject for Frenchman Flat, Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sam Marutzky

2010-09-01

An external peer review was conducted to review the groundwater models used in the corrective action investigation stage of the Underground Test Area (UGTA) subproject to forecast zones of potential contamination in 1,000 years for the Frenchman Flat area. The goal of the external peer review was to provide technical evaluation of the studies and to assist in assessing the readiness of the UGTA subproject to progress to monitoring activities for further model evaluation. The external peer review team consisted of six independent technical experts with expertise in geology, hydrogeology,'''groundwater modeling, and radiochemistry. The peer review team was tasked withmore » addressing the following questions: 1. Are the modeling approaches, assumptions, and model results for Frenchman Flat consistent with the use of modeling studies as a decision tool for resolution of environmental and regulatory requirements? 2. Do the modeling results adequately account for uncertainty in models of flow and transport in the Frenchman Flat hydrological setting? a. Are the models of sufficient scale/resolution to adequately predict contaminant transport in the Frenchman Flat setting? b. Have all key processes been included in the model? c. Are the methods used to forecast contaminant boundaries from the transport modeling studies reasonable and appropriate? d. Are the assessments of uncertainty technically sound and consistent with state-of-the-art approaches currently used in the hydrological sciences? 3. Are the datasets and modeling results adequate for a transition to Corrective Action Unit monitoring studies—the next stage in the UGTA strategy for Frenchman Flat? The peer review team is of the opinion that, with some limitations, the modeling approaches, assumptions, and model results are consistent with the use of modeling studies for resolution of environmental and regulatory requirements. The peer review team further finds that the modeling studies have accounted for uncertainty in models of flow and transport in the Frenchman Flat except for a few deficiencies described in the report. Finally, the peer review team concludes that the UGTA subproject has explored a wide range of variations in assumptions, methods, and data, and should proceed to the next stage with an emphasis on monitoring studies. The corrective action strategy, as described in the Federal Facility Agreement and Consent Order, states that the groundwater flow and transport models for each corrective action unit will consider, at a minimum, the following: • Alternative hydrostratigraphic framework models of the modeling domain. • Uncertainty in the radiological and hydrological source terms. • Alternative models of recharge. • Alternative boundary conditions and groundwater flows. • Multiple permissive sets of calibrated flow models. • Probabilistic simulations of transport using plausible sets of alternative framework and recharge models, and boundary and groundwater flows from calibrated flow models. • Ensembles of forecasts of contaminant boundaries. • Sensitivity and uncertainty analyses of model outputs. The peer review team finds that these minimum requirements have been met. While the groundwater modeling and uncertainty analyses have been quite detailed, the peer review team has identified several modeling-related issues that should be addressed in the next phase of the corrective action activities: • Evaluating and using water-level gradients from the pilot wells at the Area 5 Radioactive Waste Management Site in model calibration. • Re-evaluating the use of geochemical age-dating data to constrain model calibrations. • Developing water budgets for the alluvial and upper volcanic aquifer systems in Frenchman Flat. • Considering modeling approaches in which calculated groundwater flow directions near the water table are not predetermined by model boundary conditions and areas of recharge, all of which are very uncertain. • Evaluating local-scale variations in hydraulic conductivity on the calculated contaminant boundaries. • Evaluating the effects of non-steady-state flow conditions on calculated contaminant boundaries, including the effects of long-term declines in water levels, climatic change, and disruption of groundwater system by potential earthquake faulting along either of the two major controlling fault zones in the flow system (the Cane Spring and Rock Valley faults). • Considering the use of less-complex modeling approaches. • Evaluating the large change in water levels in the vicinity of the Frenchman Flat playa and developing a conceptual model to explain these water-level changes. • Developing a long-term groundwater level monitoring program for Frenchman Flat with regular monitoring of water levels at key monitoring wells. Despite these reservations, the peer review team strongly believes that the UGTA subproject should proceed to the next stage.« less

Deterrence Impact Modeling Environment (DIME) Proof-of-Concept Test Evaluations and Findings

DTIC Science & Technology

2016-06-01

sources of this caution: financial, technical, legal, and ethical . Several current Coast Guard policies complicate ongoing engagement with and assessment...and ethical . There is evidence that several of the stakeholder communities most important to the Coast Guard have not been early adopters of the...self-organization) or longer-term outcomes (such as over-harvesting, regeneration of biodiversity, resilience of an ecological system to human nature

Models for Scoring Missing Responses to Multiple-Choice Items. Program Statistics Research Technical Report No. 94-1.

ERIC Educational Resources Information Center

Longford, Nicholas T.

This study is a critical evaluation of the roles for coding and scoring of missing responses to multiple-choice items in educational tests. The focus is on tests in which the test-takers have little or no motivation; in such tests omitting and not reaching (as classified by the currently adopted operational rules) is quite frequent. Data from the…

Heat Strain Evaluation of U.S. Navy Steam Suit Ensembles

DTIC Science & Technology

2016-05-01

method for measuring the thermal insulation of clothing using a heated manikin. West Conshohocken, PA: ASTM International. 2. Castellani, J.W., Young...TECHNICAL REPORT NO. T16-13 DATE May 2016 ADA HEAT STRAIN EVALUATION OF U.S. NAVY STEAM SUIT ENSEMBLES DISCLAIMER The opinions or...USARIEM TECHNICAL REPORT T16-13 HEAT STRAIN EVALUATION OF U.S. NAVY STEAM SUIT ENSEMBLES

Automated dredging and disposal alternatives management system (ADDAMS). Environmental effects of dredging. Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical note describes the current capabilities and availability of the Automated Dredging and Disposal Alternatives Management System (ADDAMS). The technical note replaces the earlier Technical Note EEDP-06-12, which should be discarded. Planning, design, and management of dredging and dredged material disposal projects often require complex or tedious calculations or involve complex decision-making criteria. In addition, the evaluations often must be done for several disposal alternatives or disposal sites. ADDAMS is a personal computer (PC)-based system developed to assist in making such evaluations in a timely manner. ADDAMS contains a collection of computer programs (applications) designed to assist in managingmore » dredging projects. This technical note describes the system, currently available applications, mechanisms for acquiring and running the system, and provisions for revision and expansion.« less

Experiments and Modeling to Support Field Test Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Peter Jacob; Bourret, Suzanne Michelle; Zyvoloski, George Anthony

Disposition of heat-generating nuclear waste (HGNW) remains a continuing technical and sociopolitical challenge. We define HGNW as the combination of both heat generating defense high level waste (DHLW) and civilian spent nuclear fuel (SNF). Numerous concepts for HGNW management have been proposed and examined internationally, including an extensive focus on geologic disposal (c.f. Brunnengräber et al., 2013). One type of proposed geologic material is salt, so chosen because of its viscoplastic deformation that causes self-repair of damage or deformation induced in the salt by waste emplacement activities (Hansen and Leigh, 2011). Salt as a repository material has been tested atmore » several sites around the world, notably the Morsleben facility in Germany (c.f. Fahland and Heusermann, 2013; Wollrath et al., 2014; Fahland et al., 2015) and at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, NM. Evaluating the technical feasibility of a HGNW repository in salt is an ongoing process involving experiments and numerical modeling of many processes at many facilities.« less

A model for capacity-building in AIDS prevention programs.

PubMed

Ramos, Rebeca L; Ferreira-Pinto, João B

2002-06-01

This article discusses a collaboratively organizational capacity-building model for agencies engaged in HIV/AIDS prevention. The cooperative training approach (CTA) utilized by the Training and Technical Assistance Program trained participants to incorporate learned skills into their daily work practices, and to become trainers to help disseminate their newly acquired skills, first to others in their own organization and later to other organizations. The CTA was successfully implemented among 285 community-based organizations (CBOs) serving predominantly Hispanics in the U.S.-Mexico border region. The program evaluation demonstrated that it has significantly upgraded the program implementation capability and the organizational infrastructure of the participating organizations resulting in improved delivery of services to their clients. Furthermore, it fostered networking and collaboration for the development of sustainable training and technical assistance networks of agency staff skilled in organizational capacity building. It is suggested that funding agencies examine the feasibility of using this approach to increase the organizational capacity of CBOs involved in HIV/AIDS prevention.

48 CFR 1403.101-70 - Technical evaluators and advisors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... GENERAL IMPROPER BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Safeguards 1403.101-70 Technical... a Conflict of Interest Certificate in a format approved by the HCA. If a potential COI exists, the appointee must not be allowed to evaluate or advise on an offeror's proposal until the conflict has been...

Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

ERIC Educational Resources Information Center

Del Favero, Marietta; Hinson, Janice M.

2007-01-01

The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

Professional Personnel Evaluation System: 1983-84 Final Technical Report.

ERIC Educational Resources Information Center

Doss, David A.

This technical report summarizes the evaluation ratings given to professionals on probation or up for contract renewal in the Austin Independent School District. Graphs, tables, and rankings are presented for each specified population: all district teachers combined; teachers by school level (elementary, junior high, senior high); teachers by…

A Multisite Evaluation of Reading Is Fundamental: Technical Report.

ERIC Educational Resources Information Center

Parker, Ronald K.; And Others

Reading Is Fundamental (RIF) is a national program that seeks to motivate children to read. Implemented by local sponsors and aimed at disadvantaged groups, it offers participating children a wide selection of attractive paperbound books about interesting people, places, and events. The multisite evaluation discussed in this technical report…

U.S. EPA OFFICE OF RESEARCH AND DEVELOPMENT GUIDELINES FOR TECHNICAL EVALUATION OF ECOLOGICAL INDICATORS

EPA Science Inventory

EPA's Office of Research and Development (ORD) has prepared fifteen technical guidelines to evaluate the suitability of an ecological indicator in a monitoring program. The guidelines were fashioned to provide a consistent framework for indicator review and to provide direction f...

CAI Programs and Macros for Formative Curriculum Evaluation.

ERIC Educational Resources Information Center

Dasenbrock, David; Teates, Thomas

This technical memo is designed for persons who are interested in research with and development of curriculum material. Detailed information regarding computer programs, and program documentation used in the development and evaluation of ISCS curriculum materials is provided. The memo includes supplemental information to ISCS Technical Report I…

Cost Effectiveness in Evaluation Technical Assistance: Different Aspects of Measuring Cost and Outcomes.

ERIC Educational Resources Information Center

Estes, Gary D.

The paper focuses on the Title I Evaluation Technical Assistance Centers to illustrate issues of measuring costs and deciding on outcome criteria before promoting "cost-effective" approaches. Effects are illustrated for varying resource allocations among personnel, travel, materials, and phone costs as a function of emphasizing…

TADS Final Evaluation Report, 1980-81. Appendix S.

ERIC Educational Resources Information Center

Suarez, Tanya M.; And Others

The document contains the final report of the Technical Assistance Development System (TADS), a program which provided technical assistance (TA) services to 53 Handicapped Children's Early Education Program (HCEEP) demonstration projects and 13 State Implementation Grants (SIGs). The evaluation report is divided into five sections. Section 1…

The Effects of Solid Modeling and Visualization on Technical Problem Solving

ERIC Educational Resources Information Center

Koch, Douglas

2011-01-01

The purpose of this study was to determine whether or not the use of solid modeling software increases participants' success in solving a specified technical problem and how visualization affects their ability to solve a technical problem. Specifically, the study sought to determine if (a) students' visualization skills affect their problem…

78 FR 29314 - Approval and Promulgation of State Implementation Plans; State of Utah; Interstate Transport of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

...) SIP submissions an adequate technical analysis to support their conclusions regarding interstate... acceptable modeling technical analyses are available, but EPA does not believe that modeling is required if... regional scale technical analysis, and Utah will point to that analysis in order to conclude that there are...

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

Technical Communicator: A New Model for the Electronic Resources Librarian?

ERIC Educational Resources Information Center

Hulseberg, Anna

2016-01-01

This article explores whether technical communicator is a useful model for electronic resources (ER) librarians. The fields of ER librarianship and technical communication (TC) originated and continue to develop in relation to evolving technologies. A review of the literature reveals four common themes for ER librarianship and TC. While the…

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

A new semiquantitative method for evaluation of metastasis progression.

PubMed

Volarevic, A; Ljujic, B; Volarevic, V; Milovanovic, M; Kanjevac, T; Lukic, A; Arsenijevic, N

2012-01-01

Although recent technical advancements are directed toward developing novel assays and methods for detection of micro and macro metastasis, there are still no reports of reliable, simple to use imaging software that could be used for the detection and quantification of metastasis in tissue sections. We herein report a new semiquantitative method for evaluation of metastasis progression in a well established 4T1 orthotopic mouse model of breast cancer metastasis. The new semiquantitative method presented here was implemented by using the Autodesk AutoCAD 2012 program, a computer-aided design program used primarily for preparing technical drawings in 2 dimensions. By using the Autodesk AutoCAD 2012 software- aided graphical evaluation we managed to detect each metastatic lesion and we precisely calculated the average percentage of lung and liver tissue parenchyma with metastasis in 4T1 tumor-bearing mice. The data were highly specific and relevant to descriptive histological analysis, confirming reliability and accuracy of the AutoCAD 2012 software as new method for quantification of metastatic lesions. The new semiquantitative method using AutoCAD 2012 software provides a novel approach for the estimation of metastatic progression in histological tissue sections.

An adaptive toolkit for image quality evaluation in system performance test of digital breast tomosynthesis

NASA Astrophysics Data System (ADS)

Zhang, Guozhi; Petrov, Dimitar; Marshall, Nicholas; Bosmans, Hilde

2017-03-01

Digital breast tomosynthesis (DBT) is a relatively new diagnostic imaging modality for women. Currently, various models of DBT systems are available on the market and the number of installations is rapidly increasing. EUREF, the European Reference Organization for Quality Assured Breast Screening and Diagnostic Services, has proposed a preliminary Guideline - protocol for the quality control of the physical and technical aspects of digital breast tomosynthesis systems, with an ultimate aim of providing limiting values guaranteeing proper performance for different applications of DBT. In this work, we introduce an adaptive toolkit developed in accordance with this guideline to facilitate the process of image quality evaluation in DBT performance test. This toolkit implements robust algorithms to quantify various technical parameters of DBT images and provides a convenient user interface in practice. Each test is built into a separate module with configurations set corresponding to the European guideline, which can be easily adapted to different settings and extended with additional tests. This toolkit largely improves the efficiency for image quality evaluation of DBT. It is also going to evolve with the development of protocols in quality control of DBT systems.

Obs4MIPS: Satellite Observations for Model Evaluation

NASA Astrophysics Data System (ADS)

Ferraro, R.; Waliser, D. E.; Gleckler, P. J.

2017-12-01

This poster will review the current status of the obs4MIPs project, whose purpose is to provide a limited collection of well-established and documented datasets for comparison with Earth system models (https://www.earthsystemcog.org/projects/obs4mips/). These datasets have been reformatted to correspond with the CMIP5 model output requirements, and include technical documentation specifically targeted for their use in model output evaluation. The project holdings now exceed 120 datasets with observations that directly correspond to CMIP5 model output variables, with new additions in response to the CMIP6 experiments. With the growth in climate model output data volume, it is increasing more difficult to bring the model output and the observations together to do evaluations. The positioning of the obs4MIPs datasets within the Earth System Grid Federation (ESGF) allows for the use of currently available and planned online tools within the ESGF to perform analysis using model output and observational datasets without necessarily downloading everything to a local workstation. This past year, obs4MIPs has updated its submission guidelines to closely align with changes in the CMIP6 experiments, and is implementing additional indicators and ancillary data to allow users to more easily determine the efficacy of an obs4MIPs dataset for specific evaluation purposes. This poster will present the new guidelines and indicators, and update the list of current obs4MIPs holdings and their connection to the ESGF evaluation and analysis tools currently available, and being developed for the CMIP6 experiments.

Real-time endoscopic image orientation correction system using an accelerometer and gyrosensor.

PubMed

Lee, Hyung-Chul; Jung, Chul-Woo; Kim, Hee Chan

2017-01-01

The discrepancy between spatial orientations of an endoscopic image and a physician's working environment can make it difficult to interpret endoscopic images. In this study, we developed and evaluated a device that corrects the endoscopic image orientation using an accelerometer and gyrosensor. The acceleration of gravity and angular velocity were retrieved from the accelerometer and gyrosensor attached to the handle of the endoscope. The rotational angle of the endoscope handle was calculated using a Kalman filter with transmission delay compensation. Technical evaluation of the orientation correction system was performed using a camera by comparing the optical rotational angle from the captured image with the rotational angle calculated from the sensor outputs. For the clinical utility test, fifteen anesthesiology residents performed a video endoscopic examination of an airway model with and without using the orientation correction system. The participants reported numbers written on papers placed at the left main, right main, and right upper bronchi of the airway model. The correctness and the total time it took participants to report the numbers were recorded. During the technical evaluation, errors in the calculated rotational angle were less than 5 degrees. In the clinical utility test, there was a significant time reduction when using the orientation correction system compared with not using the system (median, 52 vs. 76 seconds; P = .012). In this study, we developed a real-time endoscopic image orientation correction system, which significantly improved physician performance during a video endoscopic exam.

The safety of magnetic resonance imaging in patients with programmable implanted intrathecal drug delivery systems: a 3-year prospective study.

PubMed

De Andres, Jose; Villanueva, Vicente; Palmisani, Stefano; Cerda-Olmedo, German; Lopez-Alarcon, Maria Dolores; Monsalve, Vicente; Minguez, Ana; Martinez-Sanjuan, Vicente

2011-05-01

It is common clinical practice to perform magnetic resonance imaging (MRI) in patients with indwelling programmable intrathecal drug delivery (IDD) systems, although the safety of the procedure has never been documented. We performed a single-center, 3-year, prospective evaluation in patients with a programmable implanted IDD to assess patient discomfort, IDD technical failures, and adverse effects during and after exposure to MRI. Forty-three consecutive patients with an implanted programmable IDD system (SynchroMed® EL Implantable Infusion Pump, Model 8626L-18, and SynchroMed® II Model 8637-20, 8637-40; Medtronic, Inc., Minneapolis, MN) requiring a scheduled MRI evaluation were studied during a 3-year period. All MRI scans were performed with a 1.5-tesla clinical use magnet and a specific absorption rate of no more than 0.9 W/kg. Radiograph control was used to confirm postexposure pump rotor movement and detect system dislocations. IDD system failures, patient satisfaction, and discomfort were recorded. None of the patients experienced signs of drug overinfusion that could lead to hemodynamic, respiratory, or neurologic alterations. Radiologic evaluation after MRI revealed no spatial displacements of the intrathecal catheter tip or body pump, and programmer telemetry confirmed the infusion recovery. Patients' satisfaction after the procedure was high. Performing an MRI scan with the proposed protocol in patients with an implanted Medtronic programmable IDD system resulted in virtually no technical or medical complications. © 2011 International Anesthesia Research Society

Evaluation of a novel, hybrid model (Mumbai EUS II) for stepwise teaching and training in EUS-guided biliary drainage and rendezvous procedures

PubMed Central

Dhir, Vinay; Itoi, Takao; Pausawasdi, Nonthalee; Khashab, Mouen A.; Perez-Miranda, Manuel; Sun, Siyu; Park, Do Hyun; Iwashita, Takuji; Teoh, Anthony Y. B.; Maydeo, Amit P.; Ho, Khek Yu

2017-01-01

Background and aims  EUS-guided biliary drainage (EUS-BD) and rendezvous (EUS-RV) are acceptable rescue options for patients with failed endoscopic retrograde cholangiopancreatography (ERCP). However, there are limited training opportunities at most centers owing to low case volumes. The existing models do not replicate the difficulties encountered during EUS-BD. We aimed to develop and validate a model for stepwise learning of EUS-BD and EUS-RV, which replicates the actual EUS-BD procedures. Methods  A hybrid model was created utilizing pig esophagus and stomach, with a synthetic duodenum and biliary system. The model was objectively assessed on a grade of 1 – 4 by two experts. Twenty-eight trainees were given initial training with didactic lectures and live procedures. This was followed by hands-on training in EUS-BD and EUS-RV on the hybrid model. Trainees were assessed for objective criteria of technical difficulties. Results  Both the experts graded the model as very good or above for all parameters. All trainees could complete the requisite steps of EUS-BD and EUS-RV in a mean time of 11 minutes (8 – 18 minutes). Thirty-six technical difficulties were noted during the training (wrong scope position, 13; incorrect duct puncture, 12; guidewire related problems, 11). Technical difficulties peaked for EUS-RV, followed by hepaticogastrostomy (HGS) and choledochoduodenostomy (CDS) (20, 9, and 7, P  = 0.001). At 10 days follow-up, nine of 28 trainees had successfully performed three EUS-RV and seven EUS-BD procedures independently. Conclusions  The Mumbai EUS II hybrid model replicates situations encountered during EUS-RV and EUS-BD. Stepwise mentoring improves the chances of success in EUS-RV and EUS-BD procedures. PMID:29250585

The acceptability of TV-based game platforms as an instrument to support the cognitive evaluation of senior adults at home.

PubMed

Rivas Costa, Carlos; Fernández Iglesias, Manuel José; Anido Rifón, Luis Eulogio; Gómez Carballa, Miguel; Valladares Rodríguez, Sonia

2017-01-01

The computing capabilities of state-of-the-art television sets and media centres may facilitate the introduction of computer-assisted evaluation at home. This approach would help to overcome the drawbacks of traditional pen-and-paper evaluations administered in clinical facilities, as they could be performed in a more comfortable environment, the subject's home, and they would be more flexible for designing complex environments for the evaluation of neuropsychological constructs that are difficult to assess through traditional testing. The objective of this work was to obtain some initial evidence about the technical acceptance by senior adults of serious games played at home on the TV set and therefore about the convenience of further investigating such an approach to cognitive assesment. We developed a collection of games to be deployed on a TV environment. These games were tried by a group of senior adults at their homes. The Technology Acceptance Model (TAM) was used to validate this approach. Surveys were performed to study the perceived usefulness and perceived ease of use of such technical setting as an instrument for their cognitive evaluation; that is, its technical acceptance. Subjective information collected from participants was correlated with actual interaction data captured. An additional survey was performed 36 months after pilot testing to have an indication about the long-term perceptions about usefulness and ease of use. More than 90% of participating subjects perceived cognitive games on TV as useful or very useful. The majority of participants selected the TV set as their preferred option to interact with serious games at home, when compared to other devices such as smartphones, tablets or PCs. This result correlates with the number of participants perceiving them as easily usable or very easy to use, and also with automatically captured interaction data. Three out of four seniors expressed their interest in keeping the system at home after the pilot. Besides, these perceptions are fairly stable in time as shown by the survey performed 36 months after pilot testing. Although participating users are a representative sample of the Galician population, which in turn is comparable to the population of most rural areas in Europe, a larger and more diverse user sample would be needed to obtain significant results for a wider population profile. The study confirmed the technical acceptance, that is, the perceived usefulness and perceived ease of use, of the TV-based home technical setting introduced as a means of cognitive evaluation. This study provides initial evidence on the viability of a TV-based serious games approach for cognitive longitudinal screening at home with little intervention of clinical professionals, thus contributing to the early detection of cognitive impairments in the senior population.

77 FR 60140 - Notice of Proposed Information Collection; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... renewed approval for the collection of information for two technical training program course effectiveness... of information contained in two technical training program course effectiveness evaluation forms. OSM... days in which to comment on the following information collection activities: Title: Technical Training...

30 CFR 7.404 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Technical requirements. 7.404 Section 7.404 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND... Cable Splice Kits § 7.404 Technical requirements. (a) Electric cables and splices shall be flame...

Toward an objective assessment of technical skills: a national survey of surgical program directors in Saudi Arabia.

PubMed

Alkhayal, Abdullah; Aldhukair, Shahla; Alselaim, Nahar; Aldekhayel, Salah; Alhabdan, Sultan; Altaweel, Waleed; Magzoub, Mohi Elden; Zamakhshary, Mohammed

2012-01-01

After almost a decade of implementing competency-based programs in postgraduate training programs, the assessment of technical skills remains more subjective than objective. National data on the assessment of technical skills during surgical training are lacking. We conducted this study to document the assessment tools for technical skills currently used in different surgical specialties, their relationship with remediation, the recommended tools from the program directors' perspective, and program directors' attitudes toward the available objective tools to assess technical skills. This study was a cross-sectional survey of surgical program directors (PDs). The survey was initially developed using a focus group and was then sent to 116 PDs. The survey contains demographic information about the program, the objective assessment tools used, and the reason for not using assessment tools. The last section discusses the recommended tools to be used from the PDs' perspective and the PDs' attitude and motivation to apply these tools in each program. The associations between the responses to the assessment questions and remediation were statistically evaluated. Seventy-one (61%) participants responded. Of the respondents, 59% mentioned using only nonstandardized, subjective, direct observation for technical skills assessment. Sixty percent use only summative evaluation, whereas 15% perform only formative evaluations of their residents, and the remaining 22% conduct both summative and formative evaluations of their residents' technical skills. Operative portfolios are kept by 53% of programs. The percentage of programs with mechanisms for remediation is 29% (19 of 65). The survey showed that surgical training programs use different tools to assess surgical skills competency. Having a clear remediation mechanism was highly associated with reporting remediation, which reflects the capability to detect struggling residents. Surgical training leadership should invest more in standardizing the assessment of surgical skills.

Voluntary medical male circumcision scale-up in Nyanza, Kenya: evaluating technical efficiency and productivity of service delivery.

PubMed

Omondi Aduda, Dickens S; Ouma, Collins; Onyango, Rosebella; Onyango, Mathews; Bertrand, Jane

2015-01-01

Voluntary medical male circumcision (VMMC) service delivery is complex and resource-intensive. In Kenya's context there is still paucity of information on resource use vis-à-vis outputs as programs scale up. Knowledge of technical efficiency, productivity and potential sources of constraints is desirable to improve decision-making. To evaluate technical efficiency and productivity of VMMC service delivery in Nyanza in 2011/2012 using data envelopment analysis. Comparative process evaluation of facilities providing VMMC in Nyanza in 2011/2012 using output orientated data envelopment analysis. Twenty one facilities were evaluated. Only 1 of 7 variables considered (total elapsed operation time) significantly improved from 32.8 minutes (SD 8.8) in 2011 to 30 minutes (SD 6.6) in 2012 (95%CI = 0.0350-5.2488; p = 0.047). Mean scale technical efficiency significantly improved from 91% (SD 19.8) in 2011 to 99% (SD 4.0) in 2012 particularly among outreach compared to fixed service delivery facilities (CI -31.47959-4.698508; p = 0.005). Increase in mean VRS technical efficiency from 84% (SD 25.3) in 2011 and 89% (SD 25.1) in 2012 was not statistically significant. Benchmark facilities were #119 and #125 in 2011 and #103 in 2012. Malmquist Productivity Index (MPI) at fixed facilities declined by 2.5% but gained by 4.9% at outreach ones by 2012. Total factor productivity improved by 83% (p = 0.032) in 2012, largely due to progress in technological efficiency by 79% (p = 0.008). Significant improvement in scale technical efficiency among outreach facilities in 2012 was attributable to accelerated activities. However, ongoing pure technical inefficiency requires concerted attention. Technological progress was the key driver of service productivity growth in Nyanza. Incorporating service-quality dimensions and using stepwise-multiple criteria in performance evaluation enhances comprehensiveness and validity. These findings highlight site-level resource use and sources of variations in VMMC service productivity, which are important for program planning.

A socio-technical model to explore urban water systems scenarios.

PubMed

de Haan, Fjalar J; Ferguson, Briony C; Deletic, Ana; Brown, Rebekah R

2013-01-01

This article reports on the ongoing work and research involved in the development of a socio-technical model of urban water systems. Socio-technical means the model is not so much concerned with the technical or biophysical aspects of urban water systems, but rather with the social and institutional implications of the urban water infrastructure and vice versa. A socio-technical model, in the view purported in this article, produces scenarios of different urban water servicing solutions gaining or losing influence in meeting water-related societal needs, like potable water, drainage, environmental health and amenity. The urban water system is parameterised with vectors of the relative influence of each servicing solution. The model is a software implementation of the Multi-Pattern Approach, a theory on societal systems, like urban water systems, and how these develop and go through transitions under various internal and external conditions. Acknowledging that social dynamics comes with severe and non-reducible uncertainties, the model is set up to be exploratory, meaning that for any initial condition several possible future scenarios are produced. This article gives a concise overview of the necessary theoretical background, the model architecture and some initial test results using a drainage example.

Hierarchical cluster analysis of technical replicates to identify interferents in untargeted mass spectrometry metabolomics.

PubMed

Caesar, Lindsay K; Kvalheim, Olav M; Cech, Nadja B

2018-08-27

Mass spectral data sets often contain experimental artefacts, and data filtering prior to statistical analysis is crucial to extract reliable information. This is particularly true in untargeted metabolomics analyses, where the analyte(s) of interest are not known a priori. It is often assumed that chemical interferents (i.e. solvent contaminants such as plasticizers) are consistent across samples, and can be removed by background subtraction from blank injections. On the contrary, it is shown here that chemical contaminants may vary in abundance across each injection, potentially leading to their misidentification as relevant sample components. With this metabolomics study, we demonstrate the effectiveness of hierarchical cluster analysis (HCA) of replicate injections (technical replicates) as a methodology to identify chemical interferents and reduce their contaminating contribution to metabolomics models. Pools of metabolites with varying complexity were prepared from the botanical Angelica keiskei Koidzumi and spiked with known metabolites. Each set of pools was analyzed in triplicate and at multiple concentrations using ultraperformance liquid chromatography coupled to mass spectrometry (UPLC-MS). Before filtering, HCA failed to cluster replicates in the data sets. To identify contaminant peaks, we developed a filtering process that evaluated the relative peak area variance of each variable within triplicate injections. These interferent peaks were found across all samples, but did not show consistent peak area from injection to injection, even when evaluating the same chemical sample. This filtering process identified 128 ions that appear to originate from the UPLC-MS system. Data sets collected for a high number of pools with comparatively simple chemical composition were highly influenced by these chemical interferents, as were samples that were analyzed at a low concentration. When chemical interferent masses were removed, technical replicates clustered in all data sets. This work highlights the importance of technical replication in mass spectrometry-based studies, and presents a new application of HCA as a tool for evaluating the effectiveness of data filtering prior to statistical analysis. Copyright © 2018 Elsevier B.V. All rights reserved.

POST-PROCESSING ANALYSIS FOR THC SEEPAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Y. SUN

This report describes the selection of water compositions for the total system performance assessment (TSPA) model of results from the thermal-hydrological-chemical (THC) seepage model documented in ''Drift-Scale THC Seepage Model'' (BSC 2004 [DIRS 169856]). The selection has been conducted in accordance with ''Technical Work Plan for: Near-Field Environment and Transport: Coupled Processes (Mountain-Scale TH/THC/THM, Drift-Scale THC Seepage, and Post-Processing Analysis for THC Seepage) Report Integration'' (BSC 2004 [DIRS 171334]). This technical work plan (TWP) was prepared in accordance with AP-2.27Q, ''Planning for Science Activities''. Section 1.2.3 of the TWP describes planning information pertaining to the technical scope, content, and managementmore » of this report. The post-processing analysis for THC seepage (THC-PPA) documented in this report provides a methodology for evaluating the near-field compositions of water and gas around a typical waste emplacement drift as these relate to the chemistry of seepage, if any, into the drift. The THC-PPA inherits the conceptual basis of the THC seepage model, but is an independently developed process. The relationship between the post-processing analysis and other closely related models, together with their main functions in providing seepage chemistry information for the Total System Performance Assessment for the License Application (TSPA-LA), are illustrated in Figure 1-1. The THC-PPA provides a data selection concept and direct input to the physical and chemical environment (P&CE) report that supports the TSPA model. The purpose of the THC-PPA is further discussed in Section 1.2. The data selection methodology of the post-processing analysis (Section 6.2.1) was initially applied to results of the THC seepage model as presented in ''Drift-Scale THC Seepage Model'' (BSC 2004 [DIRS 169856]). Other outputs from the THC seepage model (DTN: LB0302DSCPTHCS.002 [DIRS 161976]) used in the P&CE (BSC 2004 [DIRS 169860], Section 6.6) were also subjected to the same initial selection. The present report serves as a full documentation of this selection and also provides additional analyses in support of the choice of waters selected for further evaluation in ''Engineered Barrier System: Physical and Chemical Environment'' (BSC 2004 [DIRS 169860], Section 6.6). The work scope for the studies presented in this report is described in the TWP (BSC 2004 [DIRS 171334]) and other documents cited above and can be used to estimate water and gas compositions near waste emplacement drifts. Results presented in this report were submitted to the Technical Data Management System (TDMS) under specific data tracking numbers (DTNs) as listed in Appendix A. The major change from previous selection of results from the THC seepage model is that the THC-PPA now considers data selection in space around the modeled waste emplacement drift, tracking the evolution of pore-water and gas-phase composition at the edge of the dryout zone around the drift. This post-processing analysis provides a scientific background for the selection of potential seepage water compositions.« less

Perspectives to performance of environment and health assessments and models--from outputs to outcomes?

PubMed

Pohjola, Mikko V; Pohjola, Pasi; Tainio, Marko; Tuomisto, Jouni T

2013-06-26

The calls for knowledge-based policy and policy-relevant research invoke a need to evaluate and manage environment and health assessments and models according to their societal outcomes. This review explores how well the existing approaches to assessment and model performance serve this need. The perspectives to assessment and model performance in the scientific literature can be called: (1) quality assurance/control, (2) uncertainty analysis, (3) technical assessment of models, (4) effectiveness and (5) other perspectives, according to what is primarily seen to constitute the goodness of assessments and models. The categorization is not strict and methods, tools and frameworks in different perspectives may overlap. However, altogether it seems that most approaches to assessment and model performance are relatively narrow in their scope. The focus in most approaches is on the outputs and making of assessments and models. Practical application of the outputs and the consequential outcomes are often left unaddressed. It appears that more comprehensive approaches that combine the essential characteristics of different perspectives are needed. This necessitates a better account of the mechanisms of collective knowledge creation and the relations between knowledge and practical action. Some new approaches to assessment, modeling and their evaluation and management span the chain from knowledge creation to societal outcomes, but the complexity of evaluating societal outcomes remains a challenge.

Analysis and test for space shuttle propellant dynamics (1/10th scale model test results). Volume 1: Technical discussion

NASA Technical Reports Server (NTRS)

Berry, R. L.; Tegart, J. R.; Demchak, L. J.

1979-01-01

Space shuttle propellant dynamics during ET/Orbiter separation in the RTLS (return to launch site) mission abort sequence were investigated in a test program conducted in the NASA KC-135 "Zero G" aircraft using a 1/10th-scale model of the ET LOX Tank. Low-g parabolas were flown from which thirty tests were selected for evaluation. Data on the nature of low-g propellant reorientation in the ET LOX tank, and measurements of the forces exerted on the tank by the moving propellent will provide a basis for correlation with an analytical model of the slosh phenomenon.

Technical Status Review Appraisal of the Suitability of Turbulence Models in Flow Calculations (Revue Technique - L’Evaluation de l’Applicabilite des Modeles de Turbulence dans de Calcul des Ecoulements)

DTIC Science & Technology

1991-07-01

wall compared with a smooth wall. layer is due to the molecular diffusivity and to the increase in heat flux is less than the in- the transport by...models in use an Reyon-stmss- is now much , and cosiderable acityw recenly equit (R!) mdek also know ma lela 1 di1w1sed towass tesa; ad dewioplag low...flow relation is used to take into account the dependence of variables are hypothesized for the different zones. the molecular viscosity coefficient

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico

PubMed Central

2015-01-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance. PMID:27683498

Technical Advance: Live-imaging analysis of human dendritic cell migrating behavior under the influence of immune-stimulating reagents in an organotypic model of lung

PubMed Central

Nguyen Hoang, Anh Thu; Chen, Puran; Björnfot, Sofia; Högstrand, Kari; Lock, John G.; Grandien, Alf; Coles, Mark; Svensson, Mattias

2014-01-01

This manuscript describes technical advances allowing manipulation and quantitative analyses of human DC migratory behavior in lung epithelial tissue. DCs are hematopoietic cells essential for the maintenance of tissue homeostasis and the induction of tissue-specific immune responses. Important functions include cytokine production and migration in response to infection for the induction of proper immune responses. To design appropriate strategies to exploit human DC functional properties in lung tissue for the purpose of clinical evaluation, e.g., candidate vaccination and immunotherapy strategies, we have developed a live-imaging assay based on our previously described organotypic model of the human lung. This assay allows provocations and subsequent quantitative investigations of DC functional properties under conditions mimicking morphological and functional features of the in vivo parental tissue. We present protocols to set up and prepare tissue models for 4D (x, y, z, time) fluorescence-imaging analysis that allow spatial and temporal studies of human DCs in live epithelial tissue, followed by flow cytometry analysis of DCs retrieved from digested tissue models. This model system can be useful for elucidating incompletely defined pathways controlling DC functional responses to infection and inflammation in lung epithelial tissue, as well as the efficacy of locally administered candidate interventions. PMID:24899587

Designers' unified cost model

NASA Technical Reports Server (NTRS)

Freeman, W.; Ilcewicz, L.; Swanson, G.; Gutowski, T.

1992-01-01

The Structures Technology Program Office (STPO) at NASA LaRC has initiated development of a conceptual and preliminary designers' cost prediction model. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state-of-the-art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a database and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. This paper presents the team members, approach, goals, plans, and progress to date for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

Performance and Simulation of a Stand-alone Parabolic Trough Solar Thermal Power Plant

NASA Astrophysics Data System (ADS)

Mohammad, S. T.; Al-Kayiem, H. H.; Assadi, M. K.; Gilani, S. I. U. H.; Khlief, A. K.

2018-05-01

In this paper, a Simulink® Thermolib Model has been established for simulation performance evaluation of Stand-alone Parabolic Trough Solar Thermal Power Plant in Universiti Teknologi PETRONAS, Malaysia. This paper proposes a design of 1.2 kW parabolic trough power plant. The model is capable to predict temperatures at any system outlet in the plant, as well as the power output produced. The conditions that are taken into account as input to the model are: local solar radiation and ambient temperatures, which have been measured during the year. Other parameters that have been input to the model are the collector’s sizes, location in terms of latitude and altitude. Lastly, the results are presented in graphical manner to describe the analysed variations of various outputs of the solar fields obtained, and help to predict the performance of the plant. The developed model allows an initial evaluation of the viability and technical feasibility of any similar solar thermal power plant.

Integrated Evaluation of Closed Loop Air Revitalization System Components

NASA Technical Reports Server (NTRS)

Murdock, K.

2010-01-01

NASA s vision and mission statements include an emphasis on human exploration of space, which requires environmental control and life support technologies. This Contractor Report (CR) describes the development and evaluation of an Air Revitalization System, modeling and simulation of the components, and integrated hardware testing with the goal of better understanding the inherent capabilities and limitations of this closed loop system. Major components integrated and tested included a 4-Bed Modular Sieve, Mechanical Compressor Engineering Development Unit, Temperature Swing Adsorption Compressor, and a Sabatier Engineering and Development Unit. The requisite methodolgy and technical results are contained in this CR.

Technical Feasibility of Centrifugal Techniques for Evaluating Hazardous Waste Migration

DTIC Science & Technology

1987-12-01

direct evaluation of the -influence of acceleration on soil moisture movement. A fully implicit finite difference solution scheme was used. The...using the finite difference scheme mentioned earlier. 2. The soil test apparatus for the centrifuge tests was designed and constructed. 110 3...npcr3 f~nJPX 115 S.. 0i U 4 I3 u cc/ U) C~j tC LL~~*- Lý u ’ uiu ’ 4-’ Uju x~j~r3np~~r~tj~jpU W3= 116 Finite Difference Model The finite difference

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

HKHC Community Dashboard: design, development, and function of a Web-based performance monitoring system.

PubMed

Bors, Philip A; Kemner, Allison; Fulton, John; Stachecki, Jessica; Brennan, Laura K

2015-01-01

As part of Robert Wood Johnson Foundation's Healthy Kids, Healthy Communities (HKHC) national grant program, a technical assistance team designed the HKHC Community Dashboard, an online progress documentation and networking system. The Dashboard was central to HKHC's multimethod program evaluation and became a communication interface for grantees and technical assistance providers. The Dashboard was designed through an iterative process of identifying needs and priorities; designing the user experience, technical development, and usability testing; and applying visual design. The system was created with an open-source content management system and support for building an online community of users. The site developer trained technical assistance providers at the national program office and evaluators, who subsequently trained all 49 grantees. Evaluators provided support for Dashboard users and populated the site with the bulk of its uploaded tools and resource documents. The system tracked progress through an interactive work plan template, regular documentation by local staff and partners, and data coding and analysis by the evaluation team. Other features included the ability to broadcast information to Dashboard users via e-mail, event calendars, discussion forums, private messaging, a resource clearinghouse, a technical assistance diary, and real-time progress reports. The average number of Dashboard posts was 694 per grantee during the grant period. Technical assistance providers and grantees uploaded a total of 1304 resource documents. The Dashboard functions with the highest grantee satisfaction were its interfaces for sharing and progress documentation. A majority of Dashboard users (69%) indicated a preference for continued access to the Dashboard's uploaded resource documents. The Dashboard was a useful and innovative tool for participatory evaluation of a large national grant program. While progress documentation added some burden to local project staff, the system proved to be a useful resource-sharing technology.

Quality Assurance of Teachers in the Implementation of the Curriculum of Technical and Vocational Education in Colleges of Education (Technical) in North Cental Nigeria

ERIC Educational Resources Information Center

Attaochu, Egbita Ugbalu

2013-01-01

This study was carried out to ascertain the quality assurance of teachers (lecturers) in the implementation of the curriculum of Technical and Vocational Education (TVE) in Colleges of Education (Technical) in North Central Nigeria. Two research questions were formulated and answered in this study. Survey research and evaluation designs were…

Simulated lumbar minimally invasive surgery educational model with didactic and technical components.

PubMed

Chitale, Rohan; Ghobrial, George M; Lobel, Darlene; Harrop, James

2013-10-01

The learning and development of technical skills are paramount for neurosurgical trainees. External influences and a need for maximizing efficiency and proficiency have encouraged advancements in simulator-based learning models. To confirm the importance of establishing an educational curriculum for teaching minimally invasive techniques of pedicle screw placement using a computer-enhanced physical model of percutaneous pedicle screw placement with simultaneous didactic and technical components. A 2-hour educational curriculum was created to educate neurosurgical residents on anatomy, pathophysiology, and technical aspects associated with image-guided pedicle screw placement. Predidactic and postdidactic practical and written scores were analyzed and compared. Scores were calculated for each participant on the basis of the optimal pedicle screw starting point and trajectory for both fluoroscopy and computed tomographic navigation. Eight trainees participated in this module. Average mean scores on the written didactic test improved from 78% to 100%. The technical component scores for fluoroscopic guidance improved from 58.8 to 52.9. Technical score for computed tomography-navigated guidance also improved from 28.3 to 26.6. Didactic and technical quantitative scores with a simulator-based educational curriculum improved objectively measured resident performance. A minimally invasive spine simulation model and curriculum may serve a valuable function in the education of neurosurgical residents and outcomes for patients.

A Comparative Study of Students’ Track and Field Technical Performance in Sport Education and in a Direct Instruction Approach

PubMed Central

Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

2015-01-01

This study examined students’ technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students’ technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key points The impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level. The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged. PMID:25729299

RTO Technical Publications: A Quarterly Listing

NASA Technical Reports Server (NTRS)

2005-01-01

This is a listing of recent unclassified RTO technical publications processed by the NASA Center for AeroSpace Information covering the period from July 1, 2005 to September 30, 2005; and available in the NASA Aeronautics and Space Database. Contents include: Aeroelastic Deformation: Adaptation of Wind Tunnel Measurement Concepts to Full-Scale Vehicle Flight Testing; Actively Controlling Buffet-Induced Excitations; Modelling and Simulation to Address NATO's New and Existing Military Requirements; Latency in Visionic Systems: Test Methods and Requirements; Personal Hearing Protection including Active Noise Reduction; Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies; A Method to Analyze Tail Buffet Loads of Aircraft; Particle Image Velocimetry Measurements to Evaluate the Effectiveness of Deck-Edge Columnar Vortex Generators on Aircraft Carriers; Introduction to Flight Test Engineering, Volume 14; Pathological Aspects and Associated Biodynamics in Aircraft Accident Investigation;

Development of a public health reporting data warehouse: lessons learned.

PubMed

Rizi, Seyed Ali Mussavi; Roudsari, Abdul

2013-01-01

Data warehouse projects are perceived to be risky and prone to failure due to many organizational and technical challenges. However, often iterative and lengthy processes of implementation of data warehouses at an enterprise level provide an opportunity for formative evaluation of these solutions. This paper describes lessons learned from successful development and implementation of the first phase of an enterprise data warehouse to support public health surveillance at British Columbia Centre for Disease Control. Iterative and prototyping approach to development, overcoming technical challenges of extraction and integration of data from large scale clinical and ancillary systems, a novel approach to record linkage, flexible and reusable modeling of clinical data, and securing senior management support at the right time were the main factors that contributed to the success of the data warehousing project.

The Development and Implementation of a School-to-Work Apprenticeship Model at a Technical Career Center.

ERIC Educational Resources Information Center

Kraft, James A.

A business and education partnership model addressed a shortage of local, qualified, entry-level, technically skilled workers through a school-to-work apprenticeship program at the North Montco Technical Career Center in Lansdale, Pennsylvania. The research-based solution plan of the Pennsylvania Youth Apprenticeship Program (PYAP) included three…

78 FR 15664 - Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Interstate Transport...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... technical analysis supporting New Mexico's conclusion as recommended by EPA's guidance memorandum that... modeling technical analyses are available, but EPA does not believe that modeling is necessarily required...)(2)(D)(i)(I) for the 2006 PM 2.5 NAAQS in several ways. It takes into account the technical analysis...

An Intensive Onsite Technical Assistance Model to Promote Inclusive Educational Practices for Students with Disabilities in Middle School and High School

ERIC Educational Resources Information Center

Clark, Nitasha M.; Cushing, Lisa S.; Kennedy, Craig H.

2004-01-01

The authors examined the effects of an intensive onsite technical assistance (IOTA) model on the inclusive practices of special educators. Three special educators received technical assistance that included performance assessments, workshops on inclusive practices, and intensive onsite follow-up support. Inclusive practices were measured using…

Charles Morris's Semiotic Model and Analytical Studies of Visual and Verbal Representations in Technical Communication

ERIC Educational Resources Information Center

Fan, Jiang-Ping

2006-01-01

In this article, the author demonstrates that the semiotic model proposed by Charles Morris enables us to optimize our understanding of technical communication practices and provides a good point of inquiry. To illustrate this point, the author exemplifies the semiotic approaches by scholars in technical communication and elaborates Morris's model…

Local/State Bilingual Project. 1981-82 Final Technical Report. Appendixes.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

The 1981-82 Local/State Bilingual Program Technical Report addresses the evaluation questions of the Local/State Bilingual Program Evaluation Design. It is organized into six appendixes. Each appendix reports the information collected by a specific measure. Each appendix consists of (1) an instrument description, (2) purpose of the measure, (3)…

77 FR 45282 - NRC Position on the Relationship Between General Design Criteria and Technical Specification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

..., are described in the final safety analysis report (FSAR). The staff safety evaluation documents the acceptability of these analyses, and it is the combination of the FSAR analyses and the staff safety evaluation... analysis, maintain their capability to perform their safety functions. Technical Specification Operability...

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUCHANAN, J.R.

2000-05-16

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate.

Learning Objects and Virtual Learning Environments Technical Evaluation Criteria

ERIC Educational Resources Information Center

Kurilovas, Eugenijus; Dagiene, Valentina

2009-01-01

The main scientific problems investigated in this article deal with technical evaluation of quality attributes of the main components of e-Learning systems (referred here as DLEs--Digital Libraries of Educational Resources and Services), i.e., Learning Objects (LOs) and Virtual Learning Environments (VLEs). The main research object of the work is…

Performance Evaluation of Indian Technical Institutions Using PROMETHEE-GAIA Approach

ERIC Educational Resources Information Center

Ranjan, Rajeev; Chakraborty, Shankar

2015-01-01

It has now become an important issue to evaluate the performance of technical institutions to develop better research and enrich the existing teaching processes. The results of such performance appraisal would serve as a reference point for decisions to choose a particular institution, hire manpower, and provide financial support for the…

How to Recognize a Quality Technical Education Program.

ERIC Educational Resources Information Center

Doty, Charles R.

Criteria for the evaluation of quality technical educational programs must be identified if follow-up studies are to be effective. Current research shows that problems in the development of such criteria include the tendency to evaluate programs on the basis of organizational structure rather than on the quality of the instructional program…

Technical Performance as a Predictor of Clinical Outcomes in Laparoscopic Gastric Cancer Surgery.

PubMed

Fecso, Andras B; Bhatti, Junaid A; Stotland, Peter K; Quereshy, Fayez A; Grantcharov, Teodor P

2018-03-23

The purpose of this study was to evaluate the relationship between technical performance and patient outcomes in laparoscopic gastric cancer surgery. Laparoscopic gastrectomy for cancer is an advanced procedure with high rate of postoperative morbidity and mortality. Many variables including patient, disease, and perioperative management factors have been shown to impact postoperative outcomes; however, the role of surgical performance is insufficiently investigated. A retrospective review was performed for all patients who had undergone laparoscopic gastrectomy for cancer at 3 teaching institutions between 2009 and 2015. Patients with available, unedited video-recording of their procedure were included in the study. Video files were rated for technical performance, using Objective Structured Assessments of Technical Skills (OSATS) and Generic Error Rating Tool instruments. The main outcome variable was major short-term complications. The effect of technical performance on patient outcomes was assessed using logistic regression analysis with backward selection strategy. Sixty-one patients with available video recordings were included in the study. The overall complication rate was 29.5%. The mean Charlson comorbidity index, type of procedure, and the global OSATS score were included in the final predictive model. Lower performance score (OSATS ≤29) remained an independent predictor for major short-term outcomes (odds ratio 6.49), while adjusting for comorbidities and type of procedure. Intraoperative technical performance predicts major short-term outcomes in laparoscopic gastrectomy for cancer. Ongoing assessment and enhancement of surgical skills using modern, evidence-based strategies might improve short-term patient outcomes. Future work should focus on developing and studying the effectiveness of such interventions in laparoscopic gastric cancer surgery.

Privacy Protection through pseudonymisation in eHealth.

PubMed

De Meyer, F; De Moor, G; Reed-Fourquet, L

2008-01-01

The ISO TC215 WG4 pseudonymisation task group has produced in 2008 a first version of a technical specification for the application of pseudonymisation in Healthcare Informatics 0. This paper investigates the principles set out in the technical specification as well as its implications in eHealth. The technical specification starts out with a conceptual model and evolves from a theoretical model to a real life model by adding assumptions on the observability of personal data.

Cyberpsychology: a human-interaction perspective based on cognitive modeling.

PubMed

Emond, Bruno; West, Robert L

2003-10-01

This paper argues for the relevance of cognitive modeling and cognitive architectures to cyberpsychology. From a human-computer interaction point of view, cognitive modeling can have benefits both for theory and model building, and for the design and evaluation of sociotechnical systems usability. Cognitive modeling research applied to human-computer interaction has two complimentary objectives: (1) to develop theories and computational models of human interactive behavior with information and collaborative technologies, and (2) to use the computational models as building blocks for the design, implementation, and evaluation of interactive technologies. From the perspective of building theories and models, cognitive modeling offers the possibility to anchor cyberpsychology theories and models into cognitive architectures. From the perspective of the design and evaluation of socio-technical systems, cognitive models can provide the basis for simulated users, which can play an important role in usability testing. As an example of application of cognitive modeling to technology design, the paper presents a simulation of interactive behavior with five different adaptive menu algorithms: random, fixed, stacked, frequency based, and activation based. Results of the simulation indicate that fixed menu positions seem to offer the best support for classification like tasks such as filing e-mails. This research is part of the Human-Computer Interaction, and the Broadband Visual Communication research programs at the National Research Council of Canada, in collaboration with the Carleton Cognitive Modeling Lab at Carleton University.

Are general surgeons able to accurately self-assess their level of technical skills?

PubMed

Rizan, C; Ansell, J; Tilston, T W; Warren, N; Torkington, J

2015-11-01

Self-assessment is a way of improving technical capabilities without the need for trainer feedback. It can identify areas for improvement and promote professional medical development. The aim of this review was to identify whether self-assessment is an accurate form of technical skills appraisal in general surgery. The PubMed, MEDLINE(®), Embase(™) and Cochrane databases were searched for studies assessing the reliability of self-assessment of technical skills in general surgery. For each study, we recorded the skills assessed and the evaluation methods used. Common endpoints between studies were compared to provide recommendations based on the levels of evidence. Twelve studies met the inclusion criteria from 22,292 initial papers. There was no level 1 evidence published. All papers compared the correlation between self-appraisal versus an expert score but differed in the technical skills assessment and the evaluation tools used. The accuracy of self-assessment improved with increasing experience (level 2 recommendation), age (level 3 recommendation) and the use of video playback (level 3 recommendation). Accuracy was reduced by stressful learning environments (level 2 recommendation), lack of familiarity with assessment tools (level 3 recommendation) and in advanced surgical procedures (level 3 recommendation). Evidence exists to support the reliability of self-assessment of technical skills in general surgery. Several variables have been shown to affect the accuracy of self-assessment of technical skills. Future work should focus on evaluating the reliability of self-assessment during live operating procedures.

Owning the program technical baseline for future space systems acquisition: program technical baseline tracking tool

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.; Hant, James J.; Kizer, Justin R.; Min, Inki A.; Siedlak, Dennis J. L.; Yoh, James

2017-05-01

The U.S. Air Force (USAF) has recognized the needs for owning the program and technical knowledge within the Air Force concerning the systems being acquired to ensure success. This paper extends the previous work done by the authors [1-2] on the "Resilient Program Technical Baseline Framework for Future Space Systems" and "Portfolio Decision Support Tool (PDST)" to the development and implementation of the Program and Technical Baseline (PTB) Tracking Tool (PTBTL) for the DOD acquisition life cycle. The paper describes the "simplified" PTB tracking model with a focus on the preaward phases and discusses how to implement this model in PDST.

Detailed model for practical pulverized coal furnaces and gasifiers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, P.J.; Smoot, L.D.

1989-08-01

This study has been supported by a consortium of nine industrial and governmental sponsors. Work was initiated on May 1, 1985 and completed August 31, 1989. The central objective of this work was to develop, evaluate and apply a practical combustion model for utility boilers, industrial furnaces and gasifiers. Key accomplishments have included: Development of an advanced first-generation, computer model for combustion in three dimensional furnaces; development of a new first generation fouling and slagging submodel; detailed evaluation of an existing NO{sub x} submodel; development and evaluation of an improved radiation submodel; preparation and distribution of a three-volume final report:more » (a) Volume 1: General Technical Report; (b) Volume 2: PCGC-3 User's Manual; (c) Volume 3: Data Book for Evaluation of Three-Dimensional Combustion Models; and organization of a user's workshop on the three-dimensional code. The furnace computer model developed under this study requires further development before it can be applied generally to all applications; however, it can be used now by specialists for many specific applications, including non-combusting systems and combusting geseous systems. A new combustion center was organized and work was initiated to continue the important research effort initiated by this study. 212 refs., 72 figs., 38 tabs.« less

Extension of an assessment model of ship traffic exhaust emissions for particulate matter and carbon monoxide

NASA Astrophysics Data System (ADS)

Jalkanen, J.-P.; Johansson, L.; Kukkonen, J.; Brink, A.; Kalli, J.; Stipa, T.

2011-08-01

A method is presented for the evaluation of the exhaust emissions of marine traffic, based on the messages provided by the Automatic Identification System (AIS), which enable the positioning of ship emissions with a high spatial resolution (typically a few metres). The model also takes into account the detailed technical data of each individual vessel. The previously developed model was applicable for evaluating the emissions of NOx, SOx and CO2. This paper addresses a substantial extension of the modelling system, to allow also for the mass-based emissions of particulate matter (PM) and carbon monoxide (CO). The presented Ship Traffic Emissions Assessment Model (STEAM2) allows for the influences of accurate travel routes and ship speed, engine load, fuel sulphur content, multiengine setups, abatement methods and waves. We address in particular the modeling of the influence on the emissions of both engine load and the sulphur content of the fuel. The presented methodology can be used to evaluate the total PM emissions, and those of organic carbon, elemental carbon, ash and hydrated sulphate. We have evaluated the performance of the extended model against available experimental data on engine power, fuel consumption and the composition-resolved emissions of PM. As example results, the geographical distributions of the emissions of PM and CO are presented for the marine regions surrounding the Danish Straits.

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Evaluating cardiac risk: exposure response analysis in early clinical drug development.

PubMed

Grenier, Julie; Paglialunga, Sabina; Morimoto, Bruce H; Lester, Robert M

2018-01-01

The assessment of a drug's cardiac liability has undergone considerable metamorphosis by regulators since International Council for Harmonization of Technical Requirement for Pharmaceuticals for Human Use E14 guideline was introduced in 2005. Drug developers now have a choice in how proarrhythmia risk can be evaluated; the options include a dedicated thorough QT (TQT) study or exposure response (ER) modeling of intensive electrocardiogram (ECG) captured in early clinical development. The alternative approach of ER modeling was incorporated into a guidance document in 2015 as a primary analysis tool which could be utilized in early phase dose escalation studies as an option to perform a dedicated TQT trial. This review will describe the current state of ER modeling of intensive ECG data collected during early clinical drug development; the requirements with regard to the use of a positive control; and address the challenges and opportunities of this alternative approach to assessing QT liability.

Cost of ownership for inspection equipment

NASA Astrophysics Data System (ADS)

Dance, Daren L.; Bryson, Phil

1993-08-01

Cost of Ownership (CoO) models are increasingly a part of the semiconductor equipment evaluation and selection process. These models enable semiconductor manufacturers and equipment suppliers to quantify a system in terms of dollars per wafer. Because of the complex nature of the semiconductor manufacturing process, there are several key attributes that must be considered in order to accurately reflect the true 'cost of ownership'. While most CoO work to date has been applied to production equipment, the need to understand cost of ownership for inspection and metrology equipment presents unique challenges. Critical parameters such as detection sensitivity as a function of size and type of defect are not included in current CoO models yet are, without question, major factors in the technical evaluation process and life-cycle cost. This paper illustrates the relationship between these parameters, as components of the alpha and beta risk, and cost of ownership.

Guidelines for Establishing and Evaluating High School Technical Electromechanics Programs.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Technical and Adult Education.

Educators and industrial representatives developed these guidelines for school officials, instructors in technical education, and program and facility planners to use in planning a high school program in technical electromechanics. Designed to train students for entry into industry in applied electromechanics, the program includes electricity,…

Quad Charts in the Classroom to Reinforce Technical Communication Fundamentals

ERIC Educational Resources Information Center

Ford, Julie Dyke; Wei, Tie

2015-01-01

Quad charts are a genre frequently used in scientific and technical environments, yet little prior work has evaluated their potential for reinforcing technical communication fundamentals. This article provides background information about quad charts and notes the benefits of implementing quad charts in the classroom. In particular, introducing…

34 CFR 366.15 - What selection criteria does the Secretary use?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Training and Technical Assistance § 366.15 What selection criteria does the Secretary use? The Secretary uses the following criteria to evaluate applications for new awards for training and technical... project; and (2) How the objectives further training and technical assistance with respect to planning...

Technical Manual. The ACT®

ERIC Educational Resources Information Center

ACT, Inc., 2014

2014-01-01

This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

14 CFR 1260.17 - Evaluation and selection of unsolicited proposals.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... NASA recommends contact with NASA technical personnel before submission of an unsolicited proposal to...) prepared by the cognizant technical office. The JAUP shall be submitted for the approval of the grant officer after review and concurrence at a level above the technical officer. However, review and...

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

Carbon footprint estimator, phase II : volume I - GASCAP model & volume II - technical appendices [technical brief].

DOT National Transportation Integrated Search

2014-03-01

This study resulted in the development of the GASCAP model (the Greenhouse Gas Assessment : Spreadsheet for Transportation Capital Projects). This spreadsheet model provides a user-friendly interface for determining the greenhouse gas (GHG) emissions...

Heat strain models applicable for protective clothing: Comparison of core temperature response. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez, R.R.; McLellan, T.M.; Withey, W.R.

This report represents the results of TTCP-UTP6 efforts on modeling aspects when chemical protective ensembles are worn which need to be considered in warm environments. Since 1983, a significant data base has been collected using human experimental studies and wide clothing systems from which predictive modeling equations have been developed with individuals working in temperate and hot environments, but few comparisons of the -- results from various model outputs have ever been carried out. This initial comparison study was part of a key technical area (KIA) project for The Technical Cooperation Program (TTCP) UTP-6 working party. A modeling workshop wasmore » conducted in Toronto, Canada on 9-10 June 1994 to discuss the data reduction and results acquired in an initial clothing analysis study of TTCP using various chemical protective garments. To our knowledge, no comprehensive study to date has ever focused on comparing experimental results using an international standardized heat stress procedure matched to physiological outputs from various model predictions in individuals dressed in chemical protective clothing systems. This is the major focus of this TTCP key technical study. This technical report covers one aspect of the working party`s results.« less

Design Evaluation for Personnel, Training and Human Factors (DEPTH) Final Report.

DTIC Science & Technology

1998-01-17

human activity was primarily intended to facilitate man-machine design analyses of complex systems. By importing computer aided design (CAD) data, the human figure models and analysis algorithms can help to ensure components can be seen, reached, lifted and removed by most maintainers. These simulations are also useful for logistics data capture, training, and task analysis. DEPTH was also found to be useful in obtaining task descriptions for technical

Technical Evaluation Report on the Fluid Dynamics Panel Symposium on Aerodynamics and Acoustics of Propellers.

DTIC Science & Technology

1985-07-01

vortex filaments instead of the continuous sheet of vorticity used by Goldstein the propeller-nacelle interaction analysis also represents the wake by...the US Manufacturers in parallel with the development of the experimental propeller models , illustrated on Figre 0, these analysis methods range from...still poor, the difference between the two methods being mainly due to .,ifferent approaches used for obtaining lift. The Euler analysis of swirl angle

Current Simulation Methods in Military Systems Vulnerability Assessment

DTIC Science & Technology

1990-11-01

Weapons * 1990: JASON Review of the Army Approach to Vulnerability Testing Many of the suggestions and recommendations made by these committees concern...damage vectors. Ongoing work by the JASONs 29 is also targeted to developing statistical methods for LF-test/SQuASH-model comparisons in Space 2]. We...Technical Report BRL-TR-3113, June 1990. 28. L. Tonnessen, A. Fries , L. Starkey and A. Stein, Live Fire Testing in the Evaluation of the Vulnerability of

Software Capability Evaluation (SCE) Version 2.0 Implementation Guide

DTIC Science & Technology

1994-02-01

Affected By SCE B-40 Figure 3-1 SCE Usage Decision Making Criteria 3-44 Figure 3-2 Estimated SCE Labor For One Source Selection 3-53 Figure 3-3 SCE...incorporated into the source selection sponsoring organization’s technical/management team for incorporation into acquisition decisions . The SCE team...expertise, past performance, and organizational capacity in acquisition decisions . The Capability Maturity Model Basic Concepts The CMM is based on the

Cognitive Radio Application for Evaluating Coexistence with Cognitive Radars: A Software User’s Guide

DTIC Science & Technology

2017-10-01

with both conventional wireless systems as well as other types of cognitive RF systems (e.g., cognitive radar). The radio hardware for this...WBX daughtercard. This technical report begins with a system -level overview in Section 1. Then, the remaining sections explain the configuration and...Approved for public release; distribution is unlimited. 1 1. Introduction and Theory of Operation The system model has 2 kinds of cognitive radio

Satellite power system concept development and evaluation program system definition technical assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-12-01

The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW ofmore » electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.« less

In der fachsprachlichen Didaktik ist der "fachneutrale" Vorkurs ein Umweg (In Teaching Technical Language, a "Neutral Area" Course is an Evasion)

ERIC Educational Resources Information Center

Becker, Norbert

1974-01-01

In learning to read technical language, texts in specialized technical fields are preferable to "neutral area" or popular science texts. Assorted textbooks are suggested, along with suitable types of exercises and their use. Model preparatory exercises and model drills are included. (Text is in German.) (IFS/WGA)

Developing Technical Expertise in Secondary Technical Schools: The Effect of 4C/ID Learning Environments

ERIC Educational Resources Information Center

Sarfo, Frederick K.; Elen, Jan

2007-01-01

In this study, the effectiveness of learning environments, developed in line with the specifications of the four components instructional design model (4C/ID model) and the additional effect of ICT for fostering the development of technical expertise in traditional Ghanaian classrooms, was assessed. The study had a one-by-one-by-two…

U.S. ENVIRONMENTAL PROTECTION AGENCY RESEARCH AND TECHNICAL SUPPORT NEEDS RELATED TO CONCEPTUAL MODEL DEVELOPMENT FOR SUBSURFACE REACTIVE TRANSPORT MODELING OF INORGANIC CONTAMINANTS, RADIONUCLIDES, AND NUTRIENTS

EPA Science Inventory

EPA's Office of Research and Development is responsible to EPA's Office of Solid Waste to provide research and technical support for waste site closures and the development of technical guidance in support of environmental regulations and programmatic policies. ORD is also respo...

Research on Characterization of Damage States in Continuous Fiber Composites Using Ultrasonic Nondestructive Evaluation.

DTIC Science & Technology

1986-05-01

Composites Using Ultrasonic Nondestructive Evaluation Annual Technical Report I by Vikrai K. Kinra Depdrtment of Aerospace Engineering r and Mechanics...and identify by b ko number) 7It is well known that composite materials suffer complex damage when they are.-ub- jected to either monotonic or...Characterization of Damage States in Continuous Fiber Composites Using Ultrasonic Nondestructive Evaluation Annual Technical Report by Vikram K. Kinra Department

Technical Quality of Complete Dentures: Influence on Masticatory Efficiency and Quality of Life.

PubMed

Tôrres, Ana Clara Soares Paiva; Maciel, Amanda de Queiroz; de Farias, Danielle Bezerra; de Medeiros, Annie Karoline Bezerra; Vieira, Flávia Patrícia Tavares Veras; Carreiro, Adriana da Fonte Porto

2017-11-09

To evaluate the effect of the technical quality of conventional complete dentures (CD) on masticatory efficiency and quality of life (QoL) of denture wearers during a 1-year follow-up. A prospective clinical trial with 32 edentulous patients (mean age of 60.2 years) wearing mandibular and maxillary dentures was conducted. All patients were evaluated wearing their preexisting dentures and after 3, 6, and 12 months postinsertion of new dentures. A reproducible method for objective evaluation of the technical quality of CDs was employed. Masticatory efficiency was evaluated by the colorimetric method using beads as artificial testing food. The oral health impact on patient QoL was measured using the OHIP-EDENT (Oral Health Impact Profile in Edentulous Adults) questionnaire. The nonparametric Wilcoxon test was applied to reveal any differences in technical quality between the preexisting and new dentures. The Friedman test was used to detect differences in masticatory efficiency and oral health impact on QoL. Spearman's correlation was applied to reveal correlation between the variables. Comparing preexisting and new dentures, significant improvement was found in technical quality between the dentures (p < 0.001). There was no statistically significant difference in masticatory efficiency. A significant decrease was found in the total OHIP-EDENT scores after denture replacement. A positive correlation was found between technical quality and OHIP in the new denture wearers (p = 0.011). According to the results of this study, denture quality significantly improved patients' oral health-related QoL; however, insertion of new dentures did not influence masticatory efficiency. © 2017 by the American College of Prosthodontists.

Technical interventions to increase adenoma detection rate in colonoscopy.

PubMed

Rondonotti, Emanuele; Andrealli, Alida; Amato, Arnaldo; Paggi, Silvia; Conti, Clara Benedetta; Spinzi, Giancarlo; Radaelli, Franco

2016-12-01

Adenoma detection rate (ADR) is the most robust colonoscopy quality metric and clinical studies have adopted it as the ideal method to assess the impact of technical interventions. Areas covered: We reviewed papers focusing on the impact of colonoscopy technical issues on ADR, including withdrawal time and technique, second evaluation of the right colon, patient positional changes, gastrointestinal assistant participation during colonoscopy, water-aided technique, optimization of bowel preparation and antispasmodic administration. Expert commentary: Overall, technical interventions are inexpensive, available worldwide and easy to implement. Some of them, such as the adoption of split dose regimen and slow scope withdrawal to allow a careful inspection, have been demonstrated to significantly improve ADR. Emerging data support the use of water-exchange colonoscopy. According to published studies, other technical interventions seem to provide only marginal benefit to ADR. Unfortunately, the available evidence has methodological limitations, such as small sample sizes, the inclusion of expert endoscopists only and the evaluation of single technical interventions. Additionally, larger studies are needed to clarify whether these interventions might have a higher benefit on low adenoma detectors and whether the implementation of a bundle of them, instead of a single technical maneuver, might have a greater impact on ADR.

Remediation management of complex sites using an adaptive site management approach.

PubMed

Price, John; Spreng, Carl; Hawley, Elisabeth L; Deeb, Rula

2017-12-15

Complex sites require a disproportionate amount of resources for environmental remediation and long timeframes to achieve remediation objectives, due to their complex geologic conditions, hydrogeologic conditions, geochemical conditions, contaminant-related conditions, large scale of contamination, and/or non-technical challenges. A recent team of state and federal environmental regulators, federal agency representatives, industry experts, community stakeholders, and academia worked together as an Interstate Technology & Regulatory Council (ITRC) team to compile resources and create new guidance on the remediation management of complex sites. This article summarizes the ITRC team's recommended process for addressing complex sites through an adaptive site management approach. The team provided guidance for site managers and other stakeholders to evaluate site complexities and determine site remediation potential, i.e., whether an adaptive site management approach is warranted. Adaptive site management was described as a comprehensive, flexible approach to iteratively evaluate and adjust the remedial strategy in response to remedy performance. Key aspects of adaptive site management were described, including tools for revising and updating the conceptual site model (CSM), the importance of setting interim objectives to define short-term milestones on the journey to achieving site objectives, establishing a performance model and metrics to evaluate progress towards meeting interim objectives, and comparing actual with predicted progress during scheduled periodic evaluations, and establishing decision criteria for when and how to adapt/modify/revise the remedial strategy in response to remedy performance. Key findings will be published in an ITRC Technical and Regulatory guidance document in 2017 and free training webinars will be conducted. More information is available at www.itrc-web.org. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Guide to Neurotoxic Animal Models of Parkinson’s Disease

PubMed Central

Tieu, Kim

2011-01-01

Parkinson’s disease (PD) is a neurological movement disorder primarily resulting from damage to the nigrostriatal dopaminergic pathway. To elucidate the pathogenesis, mechanisms of cell death, and to evaluate therapeutic strategies for PD, numerous animal models have been developed. Understanding the strengths and limitations of these models can significantly impact the choice of model, experimental design, and data interpretation. The primary objectives of this article are twofold: First, to assist new investigators who are contemplating embarking on PD research to navigate through the available animal models. Emphasis will be placed on common neurotoxic murine models in which toxic molecules are used to lesion the nigrostriatal dopaminergic system. And second, to provide an overview of basic technical requirements for assessing the pathology, structure, and function of the nigrostriatal pathway. PMID:22229125

Assessing the impact of modeling limits on intelligent systems

NASA Technical Reports Server (NTRS)

Rouse, William B.; Hammer, John M.

1990-01-01

The knowledge bases underlying intelligent systems are validated. A general conceptual framework is provided for considering the roles in intelligent systems of models of physical, behavioral, and operational phenomena. A methodology is described for identifying limits in particular intelligent systems, and the use of the methodology is illustrated via an experimental evaluation of the pilot-vehicle interface within the Pilot's Associate. The requirements and functionality are outlined for a computer based knowledge engineering environment which would embody the approach advocated and illustrated in earlier discussions. Issues considered include the specific benefits of this functionality, the potential breadth of applicability, and technical feasibility.

Human Germline CRISPR-Cas Modification: Toward a Regulatory Framework

PubMed Central

Evitt, Niklaus H.; Mascharak, Shamik; Altman, Russ B.

2015-01-01

CRISPR germline editing therapies (CGETs) hold unprecedented potential to eradicate hereditary disorders. However, the prospect of altering the human germline has sparked a debate over the safety, efficacy, and morality of CGETs, triggering a funding moratorium by the NIH. There is an urgent need for practical paths for the evaluation of these capabilities. We propose a model regulatory framework for CGET research, clinical development, and distribution. Our model takes advantage of existing legal and regulatory institutions but adds elevated scrutiny at each stage of CGET development to accommodate the unique technical and ethical challenges posed by germline editing. PMID:26632357

R-IDEAL: A Framework for Systematic Clinical Evaluation of Technical Innovations in Radiation Oncology.

PubMed

Verkooijen, Helena M; Kerkmeijer, Linda G W; Fuller, Clifton D; Huddart, Robbert; Faivre-Finn, Corinne; Verheij, Marcel; Mook, Stella; Sahgal, Arjun; Hall, Emma; Schultz, Chris

2017-01-01

The pace of innovation in radiation oncology is high and the window of opportunity for evaluation narrow. Financial incentives, industry pressure, and patients' demand for high-tech treatments have led to widespread implementation of innovations before, or even without, robust evidence of improved outcomes has been generated. The standard phase I-IV framework for drug evaluation is not the most efficient and desirable framework for assessment of technological innovations. In order to provide a standard assessment methodology for clinical evaluation of innovations in radiotherapy, we adapted the surgical IDEAL framework to fit the radiation oncology setting. Like surgery, clinical evaluation of innovations in radiation oncology is complicated by continuous technical development, team and operator dependence, and differences in quality control. Contrary to surgery, radiotherapy innovations may be used in various ways, e.g., at different tumor sites and with different aims, such as radiation volume reduction and dose escalation. Also, the effect of radiation treatment can be modeled, allowing better prediction of potential benefits and improved patient selection. Key distinctive features of R-IDEAL include the important role of predicate and modeling studies (Stage 0), randomization at an early stage in the development of the technology, and long-term follow-up for late toxicity. We implemented R-IDEAL for clinical evaluation of a recent innovation in radiation oncology, the MRI-guided linear accelerator (MR-Linac). MR-Linac combines a radiotherapy linear accelerator with a 1.5-T MRI, aiming for improved targeting, dose escalation, and margin reduction, and is expected to increase the use of hypofractionation, improve tumor control, leading to higher cure rates and less toxicity. An international consortium, with participants from seven large cancer institutes from Europe and North America, has adopted the R-IDEAL framework to work toward coordinated, evidence-based introduction of the MR-Linac. R-IDEAL holds the promise for timely, evidence-based introduction of radiotherapy innovations with proven superior effectiveness, while preventing unnecessary exposure of patients to potentially harmful interventions.

Early warning systems for the management of chronic heart failure: a systematic literature review of cost-effectiveness models.

PubMed

Albuquerque De Almeida, Fernando; Al, Maiwenn; Koymans, Ron; Caliskan, Kadir; Kerstens, Ankie; Severens, Johan L

2018-04-01

Describing the general and methodological characteristics of decision-analytical models used in the economic evaluation of early warning systems for the management of chronic heart failure patients and performing a quality assessment of their methodological characteristics is expected to provide concise and useful insight to inform the future development of decision-analytical models in the field of heart failure management. Areas covered: The literature on decision-analytical models for the economic evaluation of early warning systems for the management of chronic heart failure patients was systematically reviewed. Nine electronic databases were searched through the combination of synonyms for heart failure and sensitive filters for cost-effectiveness and early warning systems. Expert commentary: The retrieved models show some variability with regards to their general study characteristics. Overall, they display satisfactory methodological quality, even though some points could be improved, namely on the consideration and discussion of any competing theories regarding model structure and disease progression, identification of key parameters and the use of expert opinion, and uncertainty analyses. A comprehensive definition of early warning systems and further research under this label should be pursued. To improve the transparency of economic evaluation publications, authors should make available detailed technical information regarding the published models.